omap: consolidate touch screen initialization among different boards
Add common-board-devices.c that will contain the code for peripheral
devices initializatoin shared between multiple boards.
Start small with touchscreen initialization.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 9afd087..3726465 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -19,7 +19,6 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/io.h>
@@ -48,6 +47,7 @@
#include "hsmmc.h"
#include "pm.h"
#include "control.h"
+#include "common-board-devices.h"
#define CONFIG_DISABLE_HFCLK 1
@@ -123,58 +123,6 @@
.rep = 1,
};
-static int ts_gpio; /* Needed for ads7846_get_pendown_state */
-
-/**
- * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
- *
- * @return - void. If request gpio fails then Flag KERN_ERR.
- */
-static void ads7846_dev_init(void)
-{
- if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
- printk(KERN_ERR "can't get ads746 pen down GPIO\n");
- return;
- }
-
- gpio_direction_input(ts_gpio);
- gpio_set_debounce(ts_gpio, 310);
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(ts_gpio);
-}
-
-static struct ads7846_platform_data tsc2046_config __initdata = {
- .get_pendown_state = ads7846_get_pendown_state,
- .keep_vref_on = 1,
- .wakeup = true,
-};
-
-
-static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1, /* 0: slave, 1: master */
-};
-
-static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
- [0] = {
- /*
- * TSC2046 operates at a max freqency of 2MHz, so
- * operate slightly below at 1.5MHz
- */
- .modalias = "ads7846",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 1500000,
- .controller_data = &tsc2046_mcspi_config,
- .irq = 0,
- .platform_data = &tsc2046_config,
- },
-};
-
-
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
@@ -880,6 +828,8 @@
static void __init omap_3430sdp_init(void)
{
+ int gpio_pendown;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
@@ -887,13 +837,10 @@
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
if (omap_rev() > OMAP3430_REV_ES1_0)
- ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
+ gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
else
- ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
- sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
- spi_register_board_info(sdp3430_spi_board_info,
- ARRAY_SIZE(sdp3430_spi_board_info));
- ads7846_dev_init();
+ gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
+ omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
usb_musb_init(&musb_board_data);
board_smc91x_init();