Merge branch 'next/mct-exynos' into next/clk-exynos
Conflicts:
arch/arm/mach-exynos/mach-exynos4-dt.c
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index 67ec3d4..bf0182d 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -21,3 +21,24 @@
- samsung,mfc-l : Base address of the second memory bank used by MFC
for DMA contiguous memory allocation and its size.
+
+Optional properties:
+ - samsung,power-domain : power-domain property defined with a phandle
+ to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
new file mode 100644
index 0000000..f66fcdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -0,0 +1,40 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+ EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - samsung,vbus-gpio: if present, specifies the GPIO that
+ needs to be pulled up for the bus to be powered.
+
+Example:
+
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ };
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+ OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Example:
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+ };
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 94a0628..ee414be 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -770,8 +770,10 @@
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
- select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -788,10 +790,11 @@
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
- select ARCH_USES_GETTIMEOFFSET
select ARM_VIC
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V6
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -825,9 +828,11 @@
config ARCH_S5PC100
bool "Samsung S5PC100"
- select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c62558..d3cd880 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -42,7 +42,10 @@
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
+ exynos4412-odroidx.dtb \
exynos4412-smdk4412.dtb \
+ exynos4412-origen.dtb \
+ exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5440-ssdk5440.dtb
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 46c0980..62eceb4 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -24,6 +24,144 @@
samsung,i2c-max-bus-freq = <378000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
};
i2c@12C70000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e1347fc..6581bb2 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -131,6 +131,14 @@
status = "disabled";
};
+ mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
+ status = "disabled";
+ };
+
serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index f271001..052606b 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -57,6 +57,12 @@
status = "okay";
};
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index f634907..2b1e03a 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -43,6 +43,12 @@
status = "okay";
};
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
new file mode 100644
index 0000000..0084d95
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -0,0 +1,97 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-X board based on Exynos4412";
+ compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpc1 0 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "led2:mmc0";
+ gpios = <&gpc1 2 1>;
+ default-state = "on";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ mshc@12550000 {
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ regulator_p3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpa1 1 1>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
new file mode 100644
index 0000000..31e14c4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -0,0 +1,418 @@
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Insignal Origen evaluation board based on Exynos4412";
+ compatible = "insignal,origen4412", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="console=ttySAC2,115200";
+ };
+
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 0>;
+ enable-active-high;
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+ };
+
+ mshc@12550000 {
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ i2c@13860000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+ <&gpx2 4 0>,
+ <&gpx2 5 0>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+ <&gpm3 6 0>,
+ <&gpm3 7 0>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDIOAP_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_PRE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD18_2M";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD10_MIPI";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD33_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD18_MIPI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_UOTG";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDIOPERI_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB02";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_USH";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDIOAP_MMC012_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDDIOPERI_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "DVDD25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD28_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD28_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDDA28_2M";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD28_TF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD33_A31";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDD18_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD18_A31";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "GPS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "DVDD12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_m12";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd12_5m";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vddf28_emmc";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index f05bf57..6ae4276 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -27,6 +27,19 @@
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
};
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
new file mode 100644
index 0000000..63572f9
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -0,0 +1,122 @@
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+ model = "Insignal Arndale evaluation board based on EXYNOS5250";
+ compatible = "insignal,arndale", "samsung,exynos5250";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200";
+ };
+
+ i2c@12C60000 {
+ status = "disabled";
+ };
+
+ i2c@12C70000 {
+ status = "disabled";
+ };
+
+ i2c@12C80000 {
+ status = "disabled";
+ };
+
+ i2c@12C90000 {
+ status = "disabled";
+ };
+
+ i2c@12CA0000 {
+ status = "disabled";
+ };
+
+ i2c@12CB0000 {
+ status = "disabled";
+ };
+
+ i2c@12CC0000 {
+ status = "disabled";
+ };
+
+ i2c@12CD0000 {
+ status = "disabled";
+ };
+
+ i2c@121D0000 {
+ status = "disabled";
+ };
+
+ dwmmc_0: dwmmc0@12200000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+ <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+ <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>,
+ <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+ <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>;
+ };
+ };
+
+ dwmmc_1: dwmmc1@12210000 {
+ status = "disabled";
+ };
+
+ dwmmc_2: dwmmc2@12220000 {
+ num-slots = <1>;
+ supports-highspeed;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+ gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+ <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+ <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+ };
+ };
+
+ dwmmc_3: dwmmc3@12230000 {
+ status = "disabled";
+ };
+
+ spi_0: spi@12d20000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@12d30000 {
+ status = "disabled";
+ };
+
+ spi_2: spi@12d40000 {
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 1b8d410..a8d7233 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -231,4 +231,17 @@
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&wm8994>;
};
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ };
+
+ dp-controller {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 17dd951..47b6b84 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -40,4 +40,8 @@
<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
};
};
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index c60108e..4fe76bf 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -46,6 +46,16 @@
i2c8 = &i2c_8;
};
+ pd_gsc: gsc-power-domain@0x10044000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044000 0x20>;
+ };
+
+ pd_mfc: mfc-power-domain@0x10044040 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044040 0x20>;
+ };
+
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -101,6 +111,7 @@
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
+ samsung,power-domain = <&pd_mfc>;
};
rtc {
@@ -323,6 +334,18 @@
dma-names = "tx", "rx";
};
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ };
+
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
@@ -614,28 +637,33 @@
};
};
+
gsc_0: gsc@0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
+ samsung,power-domain = <&pd_gsc>;
};
gsc_1: gsc@0x13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
+ samsung,power-domain = <&pd_gsc>;
};
gsc_2: gsc@0x13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
+ samsung,power-domain = <&pd_gsc>;
};
gsc_3: gsc@0x13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
+ samsung,power-domain = <&pd_gsc>;
};
hdmi {
@@ -649,4 +677,18 @@
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
};
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x1000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dptx-phy {
+ reg = <0x10040720>;
+ samsung,enable-mask = <1>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 81e2c96..ee60c57 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -27,20 +27,4 @@
spi {
status = "disabled";
};
-
- i2c@F0000 {
- status = "disabled";
- };
-
- i2c@100000 {
- status = "disabled";
- };
-
- watchdog {
- status = "disabled";
- };
-
- rtc {
- status = "disabled";
- };
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 5f3562a..5c5a699 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -24,43 +24,35 @@
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <3>;
};
};
- common {
- compatible = "samsung,exynos5440";
-
+ timer {
+ compatible = "arm,cortex-a15-timer",
+ "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <50000000>;
};
serial@B0000 {
@@ -110,7 +102,7 @@
};
i2c@F0000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <0 5 0>;
#address-cells = <1>;
@@ -118,7 +110,7 @@
};
i2c@100000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
interrupts = <0 6 0>;
#address-cells = <1>;
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index b0802eb..ef3b69a6 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -61,6 +61,7 @@
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
+ select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
@@ -270,8 +271,8 @@
select S5P_DEV_ONENAND
select S5P_DEV_TV
select S5P_GPIO_INT
- select S5P_HRT
select S5P_SETUP_MIPIPHY
+ select SAMSUNG_HRT
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
@@ -405,6 +406,7 @@
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS
+ select S5P_DEV_MFC
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index c4ae108..daa7b0d 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -12,7 +12,9 @@
*/
#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <linux/serial_core.h>
+#include <linux/memblock.h>
#include <linux/clocksource.h>
#include <asm/mach/arch.h>
@@ -20,6 +22,7 @@
#include <plat/cpu.h>
#include <plat/regs-serial.h>
+#include <plat/mfc.h>
#include "common.h"
@@ -114,6 +117,7 @@
"exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */
OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000,
"exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */
+ OF_DEV_AUXDATA("samsung,mfc-v5", 0x13400000, "s5p-mfc", NULL),
{},
};
@@ -136,6 +140,18 @@
NULL
};
+static void __init exynos4_reserve(void)
+{
+#ifdef CONFIG_S5P_DEV_MFC
+ struct s5p_mfc_dt_meminfo mfc_mem;
+
+ /* Reserve memory for MFC only if it's available */
+ mfc_mem.compatible = "samsung,mfc-v5";
+ if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+ s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+ mfc_mem.lsize);
+#endif
+}
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.smp = smp_ops(exynos_smp_ops),
@@ -146,4 +162,5 @@
.init_time = clocksource_of_init,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
+ .reserve = exynos4_reserve,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 7da4791..62d43da 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -140,6 +140,7 @@
"exynos-sysmmu.13", NULL), /* FIMC-LITE1 */
OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000,
"exynos-sysmmu.14", NULL), /* G2D */
+ OF_DEV_AUXDATA("samsung,exynos5-dp", 0x145B0000, "exynos-dp", NULL),
{},
};
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 497fcb7..c870b0a 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -41,7 +41,7 @@
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/fimc-core.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/camport.h>
#include <mach/map.h>
@@ -1094,7 +1094,7 @@
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
}
static void s5p_tv_setup(void)
@@ -1152,7 +1152,7 @@
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 37f513d..0c5e4fb 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -30,6 +30,7 @@
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -41,6 +42,7 @@
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
+ select SAMSUNG_HRT
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -53,6 +55,7 @@
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -63,6 +66,7 @@
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
+ select SAMSUNG_HRT
help
Support for S3C2440 Samsung Mobile CPU based systems.
@@ -72,6 +76,7 @@
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2442 Samsung Mobile CPU based systems.
@@ -87,6 +92,7 @@
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2443 SoC from the S3C24XX line
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index c0daa95..cb1b791 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -34,8 +34,6 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-#include <plat/irq.h>
-
#include "bast.h"
#define irqdbf(x...)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 641266f3..34fffdf 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -40,7 +40,6 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index d10b695..2cc017d 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -41,7 +41,6 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index 14a81c2..036056ce 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -14,7 +14,6 @@
#include <linux/init.h>
#include <linux/clk.h>
-#include <plat/s3c2416.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index bdaba59..0a53051 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -41,7 +41,6 @@
#include <plat/cpu-freq.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 3b2cf6d..404444d 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -41,11 +41,12 @@
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/pm.h>
+#include "common-smdk.h"
+
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
diff --git a/arch/arm/plat-samsung/include/plat/common-smdk.h b/arch/arm/mach-s3c24xx/common-smdk.h
similarity index 86%
rename from arch/arm/plat-samsung/include/plat/common-smdk.h
rename to arch/arm/mach-s3c24xx/common-smdk.h
index ba028f1..98f733e 100644
--- a/arch/arm/plat-samsung/include/plat/common-smdk.h
+++ b/arch/arm/mach-s3c24xx/common-smdk.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 6bcf87f..d97533d 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -47,14 +47,11 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/s3c2416.h>
-#include <plat/s3c244x.h>
-#include <plat/s3c2443.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
+#include "common.h"
+
/* table of supported CPUs */
static const char name_s3c2410[] = "S3C2410";
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index ed6276f..8a2b413 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -12,8 +12,94 @@
#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-void s3c2410_restart(char mode, const char *cmd);
-void s3c244x_restart(char mode, const char *cmd);
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_restart(char mode, const char *cmd);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern int s3c2412_baseclk_add(void);
+extern void s3c2412_restart(char mode, const char *cmd);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c244x_init_clocks(int xtal);
+extern void s3c244x_restart(char mode, const char *cmd);
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
extern struct syscore_ops s3c24xx_irq_syscore_ops;
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 25d085a..a6c94b8 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index d2408ba..c0e8c3f 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index 0b86e74..1c08eccd 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 0553625..000e4c6 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -28,7 +28,6 @@
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h b/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
deleted file mode 100644
index cbf2d88..0000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON (0x00)
-#define S3C2410_SDIPRE (0x04)
-#define S3C2410_SDICMDARG (0x08)
-#define S3C2410_SDICMDCON (0x0C)
-#define S3C2410_SDICMDSTAT (0x10)
-#define S3C2410_SDIRSP0 (0x14)
-#define S3C2410_SDIRSP1 (0x18)
-#define S3C2410_SDIRSP2 (0x1C)
-#define S3C2410_SDIRSP3 (0x20)
-#define S3C2410_SDITIMER (0x24)
-#define S3C2410_SDIBSIZE (0x28)
-#define S3C2410_SDIDCON (0x2C)
-#define S3C2410_SDIDCNT (0x30)
-#define S3C2410_SDIDSTA (0x34)
-#define S3C2410_SDIFSTA (0x38)
-
-#define S3C2410_SDIDATA (0x3C)
-#define S3C2410_SDIIMSK (0x40)
-
-#define S3C2440_SDIDATA (0x40)
-#define S3C2440_SDIIMSK (0x3C)
-
-#define S3C2440_SDICON_SDRESET (1<<8)
-#define S3C2440_SDICON_MMCCLOCK (1<<5)
-#define S3C2410_SDICON_BYTEORDER (1<<4)
-#define S3C2410_SDICON_SDIOIRQ (1<<3)
-#define S3C2410_SDICON_RWAITEN (1<<2)
-#define S3C2410_SDICON_FIFORESET (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-#define S3C2410_SDICMDCON_INDEX (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-#define S3C2440_SDIDCON_DS_WORD (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-#define S3C2410_SDIDCON_DMAEN (1<<15)
-#define S3C2410_SDIDCON_STOP (1<<14)
-#define S3C2440_SDIDCON_DATSTART (1<<14)
-#define S3C2410_SDIDCON_DATMODE (3<<12)
-#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET (1<<13)
-#define S3C2410_SDIFSTA_RFDET (1<<12)
-#define S3C2410_SDIFSTA_TFHALF (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-#define S3C2410_SDIFSTA_RFLAST (1<<9)
-#define S3C2410_SDIFSTA_RFFULL (1<<8)
-#define S3C2410_SDIFSTA_RFHALF (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-#define S3C2410_SDIIMSK_READWAIT (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-#define S3C2410_SDIIMSK_DATACRC (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index e119959..b91341e 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -16,10 +16,15 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/syscore_ops.h>
+#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/irq.h>
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/irq.h>
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
index cb9f5e0..c1b96f7 100644
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -34,7 +34,6 @@
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/pm.h>
-#include <plat/irq.h>
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
@@ -175,8 +174,7 @@
return 0;
}
-/* FIXME: make static when it's out of plat-samsung/irq.h */
-int s3c_irqext_type(struct irq_data *data, unsigned int type)
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
{
void __iomem *extint_reg;
void __iomem *gpcon_reg;
@@ -224,7 +222,7 @@
extint_offset, type);
}
-struct irq_chip s3c_irq_chip = {
+static struct irq_chip s3c_irq_chip = {
.name = "s3c",
.irq_ack = s3c_irq_ack,
.irq_mask = s3c_irq_mask,
@@ -232,7 +230,7 @@
.irq_set_wake = s3c_irq_wake
};
-struct irq_chip s3c_irq_level_chip = {
+static struct irq_chip s3c_irq_level_chip = {
.name = "s3c-level",
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 0e0279e..432144c 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -63,6 +63,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
+
#include "common.h"
static struct resource amlm5900_nor_resource =
@@ -160,6 +162,7 @@
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
#ifdef CONFIG_FB_S3C2410
@@ -237,6 +240,6 @@
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index bb595f1..24f1a04 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/samsung-time.h>
#include "anubis.h"
#include "common.h"
@@ -410,6 +411,7 @@
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
@@ -444,6 +446,6 @@
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index b4bc60c..2bf6c8c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -48,6 +48,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -192,6 +193,7 @@
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init at2440evb_init(void)
@@ -210,6 +212,6 @@
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index ca66180..eabe2db 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -55,6 +55,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
@@ -576,6 +577,7 @@
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init bast_init(void)
@@ -605,6 +607,6 @@
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index a25e8c5..84a750d 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -81,6 +81,7 @@
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "gta02.h"
@@ -501,6 +502,7 @@
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
@@ -589,6 +591,6 @@
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 79bc083..8dd6601 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -62,7 +62,7 @@
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
-
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -646,6 +646,7 @@
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
@@ -741,6 +742,6 @@
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 54e83c1..aade943 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -46,14 +46,15 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
+#include "common.h"
#include "s3c2412-power.h"
static struct map_desc jive_iodesc[] __initdata = {
@@ -506,6 +507,7 @@
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void jive_power_off(void)
@@ -661,6 +663,6 @@
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 2865e59..29f106c 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -56,6 +56,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <sound/s3c24xx_uda134x.h>
@@ -525,6 +526,7 @@
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/*
@@ -687,6 +689,6 @@
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index d9d04b2..73a690f 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -48,8 +48,8 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -536,6 +536,7 @@
n30_hwinit();
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
@@ -589,7 +590,7 @@
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
@@ -600,7 +601,7 @@
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a454e24..5c826d1 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -41,11 +41,10 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -137,6 +136,7 @@
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
@@ -153,6 +153,6 @@
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ae2cbdf..4c90ffd 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -45,6 +45,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
@@ -384,6 +385,7 @@
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
@@ -426,6 +428,6 @@
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 40a47d6..7b86707 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -33,7 +33,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "otom.h"
@@ -102,6 +102,7 @@
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init otom11_init(void)
@@ -116,6 +117,6 @@
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 56175f0..71cf29b 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -55,13 +55,14 @@
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
@@ -304,6 +305,7 @@
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init qt2410_machine_init(void)
@@ -343,6 +345,6 @@
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 1f9ba2a..799af43 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -58,6 +58,7 @@
#include <plat/pm.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -741,6 +742,7 @@
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
@@ -813,6 +815,6 @@
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index f20418a..0a3c964 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -179,6 +180,7 @@
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* H1940 and RX3715 need to reserve this for suspend */
@@ -212,6 +214,6 @@
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index e184bfa..fd96f7f 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -51,10 +51,10 @@
#include <plat/devs.h>
#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
@@ -101,6 +101,7 @@
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2410_init(void)
@@ -117,6 +118,6 @@
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 86d7847..8e3f1d9 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -41,13 +41,13 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2413_iodesc[] __initdata = {
};
@@ -106,6 +106,7 @@
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2413_machine_init(void)
@@ -132,7 +133,7 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
@@ -144,7 +145,7 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
@@ -156,6 +157,6 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index ebb2e61..cb46847 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -42,7 +42,6 @@
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
@@ -51,10 +50,12 @@
#include <plat/sdhci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
+#include <plat/samsung-time.h>
#include <plat/fb.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2416_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -221,6 +222,7 @@
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2416_machine_init(void)
@@ -253,6 +255,6 @@
.init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 08cc38c..f56cb08 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -38,15 +38,13 @@
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -163,6 +161,7 @@
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2440_machine_init(void)
@@ -181,6 +180,6 @@
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index fc65d74..9435c3b 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -38,13 +38,13 @@
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2443_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -122,6 +122,7 @@
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2443_machine_init(void)
@@ -143,6 +144,6 @@
.init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2443_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 24b3d79..31dfe58 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -53,6 +53,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -136,6 +137,7 @@
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init tct_hammer_init(void)
@@ -149,6 +151,6 @@
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index ec42d1e..deeb8a0 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -45,6 +45,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
@@ -332,6 +333,7 @@
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vr1000_init(void)
@@ -354,6 +356,6 @@
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 3e2bfdd..622a1ed 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -41,12 +41,12 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
+#include "common.h"
static struct map_desc vstms_iodesc[] __initdata = {
};
@@ -143,6 +143,7 @@
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vstms_init(void)
@@ -160,6 +161,6 @@
.init_irq = s3c24xx_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index 668a78a..4c4bc1c 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -29,7 +29,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/s3c2412.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 9ebef95..d850ea5 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -37,7 +37,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 0d59215..0f864d4 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -44,7 +44,6 @@
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c2412.h>
#include "common.h"
#include "regs-dsc.h"
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index e30476d..b9c5d38 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -50,7 +50,6 @@
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2416.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/sdhci.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 559e394..5f9d656 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -33,7 +33,6 @@
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index f732826..6819961 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -44,7 +44,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index 165b6a6..8328cd6 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -36,7 +36,6 @@
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb-core.h>
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index ad2671b..2a35edb 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -37,8 +37,6 @@
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 131c862..283cb77 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,11 +17,13 @@
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
+ select SAMSUNG_HRT
bool
help
Enable S3C6400 CPU support
config CPU_S3C6410
+ select SAMSUNG_HRT
bool
help
Enable S3C6410 CPU support
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 728eef3..35e3f54 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -208,6 +209,7 @@
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
anw6410_lcd_mode_set();
}
@@ -232,6 +234,6 @@
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 1acf02b..8ad88ac 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -64,6 +64,7 @@
#include <plat/adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "crag6410.h"
@@ -744,6 +745,7 @@
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* LCD type and Bypass set by bootloader */
}
@@ -868,6 +870,6 @@
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 7212eb9..5b7f357 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -41,6 +41,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -248,6 +249,7 @@
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init hmt_machine_init(void)
@@ -275,6 +277,6 @@
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 4b41fcd..fc043e3 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -232,6 +233,7 @@
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -354,6 +356,6 @@
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 8d3cedd..7e2c390 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -87,6 +88,7 @@
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init ncp_machine_init(void)
@@ -103,6 +105,6 @@
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index fa12bd2..8bed37b 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -42,6 +42,7 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -211,6 +212,7 @@
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -333,6 +335,6 @@
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index fc3e9b3..58ac990 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -38,6 +38,7 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -378,6 +379,7 @@
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
smartq_lcd_mode_set();
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index ca2afcf..8aca5da 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -28,6 +28,7 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
@@ -155,6 +156,6 @@
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 37bb0c6..a052e10 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -28,6 +28,7 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
@@ -171,6 +172,6 @@
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index a392869..d70c084 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -35,6 +35,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -66,6 +67,7 @@
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static struct platform_device *smdk6400_devices[] __initdata = {
@@ -92,6 +94,6 @@
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index ba7544e..bd3295a 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -69,6 +69,7 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/keypad.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -634,6 +635,7 @@
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
@@ -702,6 +704,6 @@
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index e8742cb..5a707bd 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,16 +9,16 @@
config CPU_S5P6440
bool
- select S5P_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select S5P_HRT
+ select SAMSUNG_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index e23723a..73f71a6 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -48,7 +48,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -229,7 +229,7 @@
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6440_set_lcd_interface(void)
@@ -273,6 +273,6 @@
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index ca10963..18303e1 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -48,7 +48,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -248,7 +248,7 @@
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6450_set_lcd_interface(void)
@@ -292,6 +292,6 @@
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 15170be..2f456a4 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -11,6 +11,7 @@
bool
select S5P_EXT_INT
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 185a195..8c880f7 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -51,6 +51,7 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/asoc-s3c.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -221,6 +222,7 @@
s5pc100_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc100_machine_init(void)
@@ -255,6 +257,6 @@
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pc100_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 92ad72f..0963283 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -12,10 +12,10 @@
config CPU_S5PV210
bool
select S5P_EXT_INT
- select S5P_HRT
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PV210 CPU support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 11900a8..ed2b854 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -38,7 +38,7 @@
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -651,7 +651,7 @@
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init aquila_machine_init(void)
@@ -686,6 +686,6 @@
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 3a38f7b..2564394 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -47,7 +47,7 @@
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include <plat/camport.h>
@@ -908,7 +908,7 @@
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init goni_reserve(void)
@@ -973,7 +973,7 @@
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &goni_reserve,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 28bd024..7c0ed07 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -29,7 +29,7 @@
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include "common.h"
@@ -120,7 +120,7 @@
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc110_reserve(void)
@@ -153,7 +153,7 @@
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkc110_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 3c73f36..d50b6f1 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -44,7 +44,7 @@
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/clock.h>
@@ -285,7 +285,7 @@
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
}
static void __init smdkv210_reserve(void)
@@ -329,7 +329,7 @@
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkv210_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 2d4c553..579afe8 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -26,7 +26,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -106,7 +106,7 @@
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init torbreck_machine_init(void)
@@ -130,6 +130,6 @@
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a9d52167..b708b3e 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -70,7 +70,7 @@
# timer options
-config S5P_HRT
+config SAMSUNG_HRT
bool
select SAMSUNG_DEV_PWM
help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 3a7c64d..a23c460 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,8 +12,7 @@
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
-obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
-obj-$(CONFIG_S5P_HRT) += s5p-time.o
+obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o
obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o
obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 37703ef..e126644 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -192,10 +192,6 @@
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
-/* timer for 2410/2440 */
-
-extern void s3c24xx_timer_init(void);
-
extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
diff --git a/arch/arm/plat-samsung/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h
deleted file mode 100644
index e21a89b..0000000
--- a/arch/arm/plat-samsung/include/plat/irq.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void s3c_irqsub_mask(unsigned int irqno,
- unsigned int parentbit,
- int subcheck)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
- /* check to see if we need to mask the parent IRQ */
-
- if ((submask & subcheck) == subcheck)
- __raw_writel(mask | parentbit, S3C2410_INTMSK);
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void s3c_irqsub_unmask(unsigned int irqno,
- unsigned int parentbit)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
- mask &= ~parentbit;
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void s3c_irqsub_maskack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- s3c_irqsub_mask(irqno, parentmask, group);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-static inline void s3c_irqsub_ack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
diff --git a/arch/arm/plat-samsung/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h
deleted file mode 100644
index 55b0e5f..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern int s3c2410_init(void);
-extern int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h
deleted file mode 100644
index cbae50d..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2412.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern int s3c2412_baseclk_add(void);
-
-extern void s3c2412_restart(char mode, const char *cmd);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#define s3c2412_restart NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
deleted file mode 100644
index f27399a..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern int s3c2416_baseclk_add(void);
-
-extern void s3c2416_restart(char mode, const char *cmd);
-
-extern void s3c2416_init_irq(void);
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#define s3c2416_restart NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
deleted file mode 100644
index 71b88ec..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern int s3c2443_baseclk_add(void);
-
-extern void s3c2443_restart(char mode, const char *cmd);
-
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#define s3c2443_restart NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h
deleted file mode 100644
index ea0c961..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c244x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h
deleted file mode 100644
index 9c96f35..0000000
--- a/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
- S5P_PWM0,
- S5P_PWM1,
- S5P_PWM2,
- S5P_PWM3,
- S5P_PWM4,
-};
-
-struct s5p_timer_source {
- unsigned int event_id;
- unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE 4
-
-#define TCNT_MAX 0xffffffff
-#define NON_PERIODIC 0
-#define PERIODIC 1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source);
-extern void s5p_timer_init(void);
-#endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
new file mode 100644
index 0000000..4cc99bb
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
@@ -0,0 +1,53 @@
+/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for samsung s3c and s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_SAMSUNG_TIME_H
+#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
+
+/* SAMSUNG HR-Timer Clock mode */
+enum samsung_timer_mode {
+ SAMSUNG_PWM0,
+ SAMSUNG_PWM1,
+ SAMSUNG_PWM2,
+ SAMSUNG_PWM3,
+ SAMSUNG_PWM4,
+};
+
+struct samsung_timer_source {
+ unsigned int event_id;
+ unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define SAMSUNG_TIMER_MIN_RANGE 4
+
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
+#define TCNT_MAX 0xffff
+#define TSCALER_DIV 25
+#define TDIV 50
+#define TSIZE 16
+#else
+#define TCNT_MAX 0xffffffff
+#define TSCALER_DIV 2
+#define TDIV 2
+#define TSIZE 32
+#endif
+
+#define NON_PERIODIC 0
+#define PERIODIC 1
+
+extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source);
+
+extern void __init samsung_timer_init(void);
+
+#endif /* __ASM_PLAT_SAMSUNG_TIME_H */
diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/samsung-time.c
similarity index 69%
rename from arch/arm/plat-samsung/s5p-time.c
rename to arch/arm/plat-samsung/samsung-time.c
index e92510c..f899cbc 100644
--- a/arch/arm/plat-samsung/s5p-time.c
+++ b/arch/arm/plat-samsung/samsung-time.c
@@ -2,7 +2,7 @@
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
- * S5P - Common hr-timer support
+ * samsung - Common hr-timer support (s3c and s5p)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -25,41 +25,41 @@
#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
static struct clk *tin_event;
static struct clk *tin_source;
static struct clk *tdiv_event;
static struct clk *tdiv_source;
static struct clk *timerclk;
-static struct s5p_timer_source timer_source;
+static struct samsung_timer_source timer_source;
static unsigned long clock_count_per_tick;
-static void s5p_timer_resume(void);
+static void samsung_timer_resume(void);
-static void s5p_time_stop(enum s5p_timer_mode mode)
+static void samsung_time_stop(enum samsung_timer_mode mode)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~S3C2410_TCON_T0START;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~S3C2410_TCON_T1START;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~S3C2410_TCON_T2START;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~S3C2410_TCON_T3START;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~S3C2410_TCON_T4START;
break;
@@ -70,7 +70,7 @@
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
+static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
{
unsigned long tcon;
@@ -79,27 +79,27 @@
tcnt--;
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~(0x0f << 0);
tcon |= S3C2410_TCON_T0MANUALUPD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~(0x0f << 8);
tcon |= S3C2410_TCON_T1MANUALUPD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~(0x0f << 12);
tcon |= S3C2410_TCON_T2MANUALUPD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~(0x0f << 16);
tcon |= S3C2410_TCON_T3MANUALUPD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~(0x07 << 20);
tcon |= S3C2410_TCON_T4MANUALUPD;
break;
@@ -114,14 +114,14 @@
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
+static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon |= S3C2410_TCON_T0START;
tcon &= ~S3C2410_TCON_T0MANUALUPD;
@@ -131,7 +131,7 @@
tcon &= ~S3C2410_TCON_T0RELOAD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon |= S3C2410_TCON_T1START;
tcon &= ~S3C2410_TCON_T1MANUALUPD;
@@ -141,7 +141,7 @@
tcon &= ~S3C2410_TCON_T1RELOAD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon |= S3C2410_TCON_T2START;
tcon &= ~S3C2410_TCON_T2MANUALUPD;
@@ -151,7 +151,7 @@
tcon &= ~S3C2410_TCON_T2RELOAD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon |= S3C2410_TCON_T3START;
tcon &= ~S3C2410_TCON_T3MANUALUPD;
@@ -161,7 +161,7 @@
tcon &= ~S3C2410_TCON_T3RELOAD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon |= S3C2410_TCON_T4START;
tcon &= ~S3C2410_TCON_T4MANUALUPD;
@@ -178,24 +178,24 @@
__raw_writel(tcon, S3C2410_TCON);
}
-static int s5p_set_next_event(unsigned long cycles,
+static int samsung_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- s5p_time_setup(timer_source.event_id, cycles);
- s5p_time_start(timer_source.event_id, NON_PERIODIC);
+ samsung_time_setup(timer_source.event_id, cycles);
+ samsung_time_start(timer_source.event_id, NON_PERIODIC);
return 0;
}
-static void s5p_set_mode(enum clock_event_mode mode,
+static void samsung_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- s5p_time_stop(timer_source.event_id);
+ samsung_time_stop(timer_source.event_id);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -206,24 +206,24 @@
break;
case CLOCK_EVT_MODE_RESUME:
- s5p_timer_resume();
+ samsung_timer_resume();
break;
}
}
-static void s5p_timer_resume(void)
+static void samsung_timer_resume(void)
{
/* event timer restart */
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
/* source timer restart */
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
}
-void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source)
+void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source)
{
s3c_device_timer[event].dev.bus = &platform_bus_type;
s3c_device_timer[source].dev.bus = &platform_bus_type;
@@ -233,14 +233,14 @@
}
static struct clock_event_device time_event_device = {
- .name = "s5p_event_timer",
+ .name = "samsung_event_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
- .set_next_event = s5p_set_next_event,
- .set_mode = s5p_set_mode,
+ .set_next_event = samsung_set_next_event,
+ .set_mode = samsung_set_mode,
};
-static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
+static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
@@ -249,14 +249,14 @@
return IRQ_HANDLED;
}
-static struct irqaction s5p_clock_event_irq = {
- .name = "s5p_time_irq",
+static struct irqaction samsung_clock_event_irq = {
+ .name = "samsung_time_irq",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s5p_clock_event_isr,
+ .handler = samsung_clock_event_isr,
.dev_id = &time_event_device,
};
-static void __init s5p_clockevent_init(void)
+static void __init samsung_clockevent_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
@@ -267,8 +267,8 @@
tscaler = clk_get_parent(tdiv_event);
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv_event, pclk / 2);
+ clk_set_rate(tscaler, pclk / TSCALER_DIV);
+ clk_set_rate(tdiv_event, pclk / TDIV);
clk_set_parent(tin_event, tdiv_event);
clock_rate = clk_get_rate(tin_event);
@@ -278,22 +278,22 @@
clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &s5p_clock_event_irq);
+ setup_irq(irq_number, &samsung_clock_event_irq);
}
-static void __iomem *s5p_timer_reg(void)
+static void __iomem *samsung_timer_reg(void)
{
unsigned long offset = 0;
switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
+ case SAMSUNG_PWM0:
+ case SAMSUNG_PWM1:
+ case SAMSUNG_PWM2:
+ case SAMSUNG_PWM3:
offset = (timer_source.source_id * 0x0c) + 0x14;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
offset = 0x40;
break;
@@ -312,9 +312,9 @@
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static u32 notrace s5p_read_sched_clock(void)
+static u32 notrace samsung_read_sched_clock(void)
{
- void __iomem *reg = s5p_timer_reg();
+ void __iomem *reg = samsung_timer_reg();
if (!reg)
return 0;
@@ -322,29 +322,29 @@
return ~__raw_readl(reg);
}
-static void __init s5p_clocksource_init(void)
+static void __init samsung_clocksource_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
pclk = clk_get_rate(timerclk);
- clk_set_rate(tdiv_source, pclk / 2);
+ clk_set_rate(tdiv_source, pclk / TDIV);
clk_set_parent(tin_source, tdiv_source);
clock_rate = clk_get_rate(tin_source);
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
- setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
+ setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
- if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
- clock_rate, 250, 32, clocksource_mmio_readl_down))
- panic("s5p_clocksource_timer: can't register clocksource\n");
+ if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
+ clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
+ panic("samsung_clocksource_timer: can't register clocksource\n");
}
-static void __init s5p_timer_resources(void)
+static void __init samsung_timer_resources(void)
{
unsigned long event_id = timer_source.event_id;
@@ -386,9 +386,9 @@
clk_enable(tin_source);
}
-void __init s5p_timer_init(void)
+void __init samsung_timer_init(void)
{
- s5p_timer_resources();
- s5p_clockevent_init();
- s5p_clocksource_init();
+ samsung_timer_resources();
+ samsung_clockevent_init();
+ samsung_clocksource_init();
}
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
deleted file mode 100644
index 73defd0..0000000
--- a/arch/arm/plat-samsung/time.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/* linux/arch/arm/plat-samsung/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- * Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/irq.h>
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-irq.h>
-#include <asm/mach/time.h>
-#include <mach/tick.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#ifndef TICK_MAX
-#define TICK_MAX (0xffff)
-#endif
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
- unsigned long den = pclk / 1000;
-
- return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
- unsigned long res;
-
- res = ticks * timer_usec_ticks;
- res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */
-
- return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-static u32 s3c2410_gettimeoffset(void)
-{
- unsigned long tdone;
- unsigned long tval;
-
- /* work out how many ticks have gone since last timer interrupt */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- /* check to see if there is an interrupt pending */
-
- if (s3c24xx_ostimer_pending()) {
- /* re-read the timer, and try and fix up for the missed
- * interrupt. Note, the interrupt may go off before the
- * timer has re-loaded from wrapping.
- */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- if (tval != 0)
- tdone += timer_startval;
- }
-
- return timer_ticks_to_usec(tdone) * 1000;
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
- .name = "S3C2410 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
- machine_is_bast() || \
- machine_is_vr1000() || \
- machine_is_anubis() || \
- machine_is_osiris())
-
-static struct clk *tin;
-static struct clk *tdiv;
-static struct clk *timerclk;
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
- unsigned long tcon;
- unsigned long tcnt;
- unsigned long tcfg1;
- unsigned long tcfg0;
-
- tcnt = TICK_MAX; /* default value for tcnt */
-
- /* configure the system for whichever machine is in use */
-
- if (use_tclk1_12()) {
- /* timer is at 12MHz, scaler is 1 */
- timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
- tcnt = 12000000 / HZ;
-
- tcfg1 = __raw_readl(S3C2410_TCFG1);
- tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
- tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
- __raw_writel(tcfg1, S3C2410_TCFG1);
- } else {
- unsigned long pclk;
- struct clk *tscaler;
-
- /* for the h1940 (and others), we use the pclk from the core
- * to generate the timer values. since values around 50 to
- * 70MHz are not values we can directly generate the timer
- * value from, we need to pre-scale and divide before using it.
- *
- * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
- * (8.45 ticks per usec)
- */
-
- pclk = clk_get_rate(timerclk);
-
- /* configure clock tick */
-
- timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
- tscaler = clk_get_parent(tdiv);
-
- clk_set_rate(tscaler, pclk / 3);
- clk_set_rate(tdiv, pclk / 6);
- clk_set_parent(tin, tdiv);
-
- tcnt = clk_get_rate(tin) / HZ;
- }
-
- tcon = __raw_readl(S3C2410_TCON);
- tcfg0 = __raw_readl(S3C2410_TCFG0);
- tcfg1 = __raw_readl(S3C2410_TCFG1);
-
- /* timers reload after counting zero, so reduce the count by 1 */
-
- tcnt--;
-
- printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
- tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
- /* check to see if timer is within 16bit range... */
- if (tcnt > TICK_MAX) {
- panic("setup_timer: HZ is too small, cannot configure timer!");
- return;
- }
-
- __raw_writel(tcfg1, S3C2410_TCFG1);
- __raw_writel(tcfg0, S3C2410_TCFG0);
-
- timer_startval = tcnt;
- __raw_writel(tcnt, S3C2410_TCNTB(4));
-
- /* ensure timer is stopped... */
-
- tcon &= ~(7<<20);
- tcon |= S3C2410_TCON_T4RELOAD;
- tcon |= S3C2410_TCON_T4MANUALUPD;
-
- __raw_writel(tcon, S3C2410_TCON);
- __raw_writel(tcnt, S3C2410_TCNTB(4));
- __raw_writel(tcnt, S3C2410_TCMPB(4));
-
- /* start the timer running */
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_resources(void)
-{
- struct platform_device tmpdev;
-
- tmpdev.dev.bus = &platform_bus_type;
- tmpdev.id = 4;
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get clock for system timer");
-
- clk_enable(timerclk);
-
- if (!use_tclk1_12()) {
- tmpdev.id = 4;
- tmpdev.dev.init_name = "s3c24xx-pwm.4";
- tin = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin))
- panic("failed to get pwm-tin clock for system timer");
-
- tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv))
- panic("failed to get pwm-tdiv clock for system timer");
- }
-
- clk_enable(tin);
-}
-
-static struct syscore_ops s3c24xx_syscore_ops = {
- .resume = s3c2410_timer_setup,
-};
-
-void __init s3c24xx_timer_init(void)
-{
- arch_gettimeoffset = s3c2410_gettimeoffset;
-
- s3c2410_timer_resources();
- s3c2410_timer_setup();
- setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
- register_syscore_ops(&s3c24xx_syscore_ops);
-}
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 63fb265..8d6794c 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -25,14 +25,93 @@
#include <mach/dma.h>
-#include <mach/regs-sdi.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
#define DRIVER_NAME "s3c-mci"
+#define S3C2410_SDICON (0x00)
+#define S3C2410_SDIPRE (0x04)
+#define S3C2410_SDICMDARG (0x08)
+#define S3C2410_SDICMDCON (0x0C)
+#define S3C2410_SDICMDSTAT (0x10)
+#define S3C2410_SDIRSP0 (0x14)
+#define S3C2410_SDIRSP1 (0x18)
+#define S3C2410_SDIRSP2 (0x1C)
+#define S3C2410_SDIRSP3 (0x20)
+#define S3C2410_SDITIMER (0x24)
+#define S3C2410_SDIBSIZE (0x28)
+#define S3C2410_SDIDCON (0x2C)
+#define S3C2410_SDIDCNT (0x30)
+#define S3C2410_SDIDSTA (0x34)
+#define S3C2410_SDIFSTA (0x38)
+
+#define S3C2410_SDIDATA (0x3C)
+#define S3C2410_SDIIMSK (0x40)
+
+#define S3C2440_SDIDATA (0x40)
+#define S3C2440_SDIIMSK (0x3C)
+
+#define S3C2440_SDICON_SDRESET (1 << 8)
+#define S3C2410_SDICON_SDIOIRQ (1 << 3)
+#define S3C2410_SDICON_FIFORESET (1 << 1)
+#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
+
+#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
+#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
+#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
+#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
+
+#define S3C2440_SDIDCON_DS_WORD (2 << 22)
+#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
+#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
+#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
+#define S3C2410_SDIDCON_DMAEN (1 << 15)
+#define S3C2410_SDIDCON_STOP (1 << 14)
+#define S3C2440_SDIDCON_DATSTART (1 << 14)
+
+#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
+
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
+#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
+#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
+#define S3C2410_SDIDSTA_TXDATAON (1 << 1)
+#define S3C2410_SDIDSTA_RXDATAON (1 << 0)
+
+#define S3C2440_SDIFSTA_FIFORESET (1 << 16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14)
+#define S3C2410_SDIFSTA_TFDET (1 << 13)
+#define S3C2410_SDIFSTA_RFDET (1 << 12)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17)
+#define S3C2410_SDIIMSK_CMDSENT (1 << 16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15)
+#define S3C2410_SDIIMSK_RESPONSEND (1 << 14)
+#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10)
+#define S3C2410_SDIIMSK_DATACRC (1 << 9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8)
+#define S3C2410_SDIIMSK_DATAFINISH (1 << 7)
+#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0)
+
enum dbg_channels {
dbg_err = (1 << 0),
dbg_debug = (1 << 1),