diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 25efbaf..2443f5b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -658,11 +658,12 @@
 	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=dbgp
 
 			Append ",keep" to not disable it when the real console
 			takes over.
 
-			Only vga or serial at a time, not both.
+			Only vga or serial or usb debug port at a time.
 
 			Currently only ttyS0 and ttyS1 are supported.
 
@@ -1231,6 +1232,29 @@
 			         or
 			         memmap=0x10000$0x18690000
 
+	memory_corruption_check=0/1 [X86]
+			Some BIOSes seem to corrupt the first 64k of
+			memory when doing things like suspend/resume.
+			Setting this option will scan the memory
+			looking for corruption.  Enabling this will
+			both detect corruption and prevent the kernel
+			from using the memory being corrupted.
+			However, its intended as a diagnostic tool; if
+			repeatable BIOS-originated corruption always
+			affects the same memory, you can use memmap=
+			to prevent the kernel from using that memory.
+
+	memory_corruption_check_size=size [X86]
+			By default it checks for corruption in the low
+			64k, making this memory unavailable for normal
+			use.  Use this parameter to scan for
+			corruption in more or less memory.
+
+	memory_corruption_check_period=seconds [X86]
+			By default it checks for corruption every 60
+			seconds.  Use this parameter to check at some
+			other rate.  0 disables periodic checking.
+
 	memtest=	[KNL,X86] Enable memtest
 			Format: <integer>
 			range: 0,4 : pattern number
diff --git a/MAINTAINERS b/MAINTAINERS
index 587f418..8bf72d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -390,6 +390,11 @@
 T:	git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
 S:	Supported
 
+AMD MICROCODE UPDATE SUPPORT
+P:      Peter Oruba
+M:      peter.oruba@amd.com
+S:      Supported
+
 AMS (Apple Motion Sensor) DRIVER
 P:	Stelian Pop
 M:	stelian@popies.net
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 44d4f21..fc8351f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -778,23 +778,45 @@
 	  Say N otherwise.
 
 config MICROCODE
-	tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+	tristate "/dev/cpu/microcode - microcode support"
 	select FW_LOADER
 	---help---
 	  If you say Y here, you will be able to update the microcode on
-	  Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
-	  Pentium III, Pentium 4, Xeon etc.  You will obviously need the
-	  actual microcode binary data itself which is not shipped with the
-	  Linux kernel.
+	  certain Intel and AMD processors. The Intel support is for the
+	  IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
+	  Pentium 4, Xeon etc. The AMD support is for family 0x10 and
+	  0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
+	  You will obviously need the actual microcode binary data itself
+	  which is not shipped with the Linux kernel.
 
-	  For latest news and information on obtaining all the required
-	  ingredients for this driver, check:
-	  <http://www.urbanmyth.org/microcode/>.
+	  This option selects the general module only, you need to select
+	  at least one vendor specific module as well.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called microcode.
 
-config MICROCODE_OLD_INTERFACE
+config MICROCODE_INTEL
+       bool "Intel microcode patch loading support"
+       depends on MICROCODE
+       default MICROCODE
+       select FW_LOADER
+       --help---
+         This options enables microcode patch loading support for Intel
+         processors.
+
+         For latest news and information on obtaining all the required
+         Intel ingredients for this driver, check:
+         <http://www.urbanmyth.org/microcode/>.
+
+config MICROCODE_AMD
+       bool "AMD microcode patch loading support"
+       depends on MICROCODE
+       select FW_LOADER
+       --help---
+         If you select this option, microcode patch loading support for AMD
+	 processors will be enabled.
+
+   config MICROCODE_OLD_INTERFACE
 	def_bool y
 	depends on MICROCODE
 
@@ -1061,6 +1083,56 @@
 	  low memory.  Setting this option will put user-space page table
 	  entries in high memory.
 
+config X86_CHECK_BIOS_CORRUPTION
+        bool "Check for low memory corruption"
+	help
+	 Periodically check for memory corruption in low memory, which
+	 is suspected to be caused by BIOS.  Even when enabled in the
+	 configuration, it is disabled at runtime.  Enable it by
+	 setting "memory_corruption_check=1" on the kernel command
+	 line.  By default it scans the low 64k of memory every 60
+	 seconds; see the memory_corruption_check_size and
+	 memory_corruption_check_period parameters in
+	 Documentation/kernel-parameters.txt to adjust this.
+
+	 When enabled with the default parameters, this option has
+	 almost no overhead, as it reserves a relatively small amount
+	 of memory and scans it infrequently.  It both detects corruption
+	 and prevents it from affecting the running system.
+
+	 It is, however, intended as a diagnostic tool; if repeatable
+	 BIOS-originated corruption always affects the same memory,
+	 you can use memmap= to prevent the kernel from using that
+	 memory.
+
+config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+        bool "Set the default setting of memory_corruption_check"
+	depends on X86_CHECK_BIOS_CORRUPTION
+	default y
+	help
+	 Set whether the default state of memory_corruption_check is
+	 on or off.
+
+config X86_RESERVE_LOW_64K
+        bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+	default y
+	help
+	 Reserve the first 64K of physical RAM on BIOSes that are known
+	 to potentially corrupt that memory range. A numbers of BIOSes are
+	 known to utilize this area during suspend/resume, so it must not
+	 be used by the kernel.
+
+	 Set this to N if you are absolutely sure that you trust the BIOS
+	 to get all its memory reservations and usages right.
+
+	 If you have doubts about the BIOS (e.g. suspend/resume does not
+	 work or there's kernel crashes after certain hardware hotplug
+	 events) and it's not AMI or Phoenix, then you might want to enable
+	 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+	 corruption patterns.
+
+	 Say Y if unsure.
+
 config MATH_EMULATION
 	bool
 	prompt "Math emulation" if X86_32
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index f8843c3..c5f1013 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -420,7 +420,6 @@
 	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
 
 menuconfig PROCESSOR_SELECT
-	default y
 	bool "Supported processor vendors" if EMBEDDED
 	help
 	  This lets you choose what x86 vendor support code your kernel
@@ -430,48 +429,97 @@
 	default y
 	bool "Support Intel processors" if PROCESSOR_SELECT
 	help
-	  This enables extended support for Intel processors
+	  This enables detection, tunings and quirks for Intel processors
+
+	  You need this enabled if you want your kernel to run on an
+	  Intel CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on an Intel
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
 
 config CPU_SUP_CYRIX_32
 	default y
 	bool "Support Cyrix processors" if PROCESSOR_SELECT
 	depends on !64BIT
 	help
-	  This enables extended support for Cyrix processors
+	  This enables detection, tunings and quirks for Cyrix processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Cyrix CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Cyrix
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
 
 config CPU_SUP_AMD
 	default y
 	bool "Support AMD processors" if PROCESSOR_SELECT
 	help
-	  This enables extended support for AMD processors
+	  This enables detection, tunings and quirks for AMD processors
+
+	  You need this enabled if you want your kernel to run on an
+	  AMD CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on an AMD
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
 
 config CPU_SUP_CENTAUR_32
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on !64BIT
 	help
-	  This enables extended support for Centaur processors
+	  This enables detection, tunings and quirks for Centaur processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Centaur CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Centaur
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
 
 config CPU_SUP_CENTAUR_64
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on 64BIT
 	help
-	  This enables extended support for Centaur processors
+	  This enables detection, tunings and quirks for Centaur processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Centaur CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Centaur
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
 
 config CPU_SUP_TRANSMETA_32
 	default y
 	bool "Support Transmeta processors" if PROCESSOR_SELECT
 	depends on !64BIT
 	help
-	  This enables extended support for Transmeta processors
+	  This enables detection, tunings and quirks for Transmeta processors
+
+	  You need this enabled if you want your kernel to run on a
+	  Transmeta CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a Transmeta
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
 
 config CPU_SUP_UMC_32
 	default y
 	bool "Support UMC processors" if PROCESSOR_SELECT
 	depends on !64BIT
 	help
-	  This enables extended support for UMC processors
+	  This enables detection, tunings and quirks for UMC processors
+
+	  You need this enabled if you want your kernel to run on a
+	  UMC CPU. Disabling this option on other types of CPUs
+	  makes the kernel a tiny bit smaller. Disabling it on a UMC
+	  CPU might render the kernel unbootable.
+
+	  If unsure, say N.
 
 config X86_DS
 	bool "Debug Store support"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 092f019..2a3dfbd 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,6 +43,19 @@
 	  with klogd/syslogd or the X server. You should normally N here,
 	  unless you want to debug such a crash.
 
+config EARLY_PRINTK_DBGP
+	bool "Early printk via EHCI debug port"
+	default n
+	depends on EARLY_PRINTK && PCI
+	help
+	  Write kernel log output directly into the EHCI debug port.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks ugly and doesn't cooperate
+	  with klogd/syslogd or the X server. You should normally N here,
+	  unless you want to debug such a crash. You need usb debug device.
+
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index e372b58..b72b4f75 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -45,3 +45,8 @@
 # cpu entries
 cflags-$(CONFIG_X86_GENERIC) 	+= $(call tune,generic,$(call tune,i686))
 
+# Bug fix for binutils: this option is required in order to keep
+# binutils from generating NOPL instructions against our will.
+ifneq ($(CONFIG_X86_P6_NOP),y)
+cflags-y			+= $(call cc-option,-Wa$(comma)-mtune=generic32,)
+endif
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 7ee102f..cd48c72 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -72,9 +72,7 @@
 KBUILD_CFLAGS +=   $(call cc-option,-m32)
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 
-$(obj)/zImage:  IMAGE_OFFSET := 0x1000
 $(obj)/zImage:  asflags-y := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
 $(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
 $(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
 $(obj)/bzImage: BUILDFLAGS   := -b
@@ -117,7 +115,7 @@
 	$(call if_changed,objcopy)
 
 $(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 # Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
 FDARGS =
@@ -181,6 +179,7 @@
 	mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
 		-no-emul-boot -boot-load-size 4 -boot-info-table \
 		$(obj)/isoimage
+	isohybrid $(obj)/image.iso 2>/dev/null || true
 	rm -rf $(obj)/isoimage
 
 zlilo: $(BOOTIMAGE)
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 92fdd35..1771c80 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -27,9 +27,8 @@
 	$(call if_changed,objcopy)
 
 
-ifeq ($(CONFIG_X86_32),y)
-targets += vmlinux.bin.all vmlinux.relocs
-hostprogs-y := relocs
+targets += vmlinux.bin.all vmlinux.relocs relocs
+hostprogs-$(CONFIG_X86_32) += relocs
 
 quiet_cmd_relocs = RELOCS  $@
       cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -43,6 +42,8 @@
 $(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,relocbin)
 
+ifeq ($(CONFIG_X86_32),y)
+
 ifdef CONFIG_RELOCATABLE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
 	$(call if_changed,gzip)
@@ -59,6 +60,5 @@
 LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
 endif
 
-
 $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
 	$(call if_changed,ld)
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index d93cbc6..1aae8f3 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -41,6 +41,7 @@
 	char *mbrbuf_ptr, *mbrbuf_end;
 	u32 buf_base, mbr_base;
 	extern char _end[];
+	u16 mbr_magic;
 
 	sector_size = ei->params.bytes_per_sector;
 	if (!sector_size)
@@ -58,11 +59,15 @@
 	if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
 		return -1;
 
+	memset(mbrbuf_ptr, 0, sector_size);
 	if (read_mbr(devno, mbrbuf_ptr))
 		return -1;
 
 	*mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
-	return 0;
+	mbr_magic = *(u16 *)&mbrbuf_ptr[510];
+
+	/* check for valid MBR magic */
+	return mbr_magic == 0xAA55 ? 0 : -1;
 }
 
 static int get_edd_info(u8 devno, struct edd_info *ei)
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 401ad99..1e6fe02 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -224,7 +224,7 @@
 static void vesa_store_mode_params_graphics(void)
 {
 	/* Tell the kernel we're in VESA graphics mode */
-	boot_params.screen_info.orig_video_isVGA = 0x23;
+	boot_params.screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB;
 
 	/* Mode parameters */
 	boot_params.screen_info.vesa_attributes = vminfo.mode_attr;
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index ef9a520..ca226ca 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1535,7 +1535,6 @@
 CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index e620ea6..2c4b1c7 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1505,7 +1505,6 @@
 CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 7b655b5..5098585 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -51,7 +51,6 @@
 obj-$(CONFIG_MCA)		+= mca_32.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
-obj-$(CONFIG_MICROCODE)		+= microcode.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
@@ -100,6 +99,11 @@
 
 obj-$(CONFIG_OLPC)		+= olpc.o
 
+microcode-y				:= microcode_core.o
+microcode-$(CONFIG_MICROCODE_INTEL)	+= microcode_intel.o
+microcode-$(CONFIG_MICROCODE_AMD)	+= microcode_amd.o
+obj-$(CONFIG_MICROCODE)			+= microcode.o
+
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c2ac1b4..eb875cd 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1418,8 +1418,16 @@
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 {
-	pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident);
-	acpi_skip_timer_override = 1;
+	/*
+	 * The ati_ixp4x0_rev() early PCI quirk should have set
+	 * the acpi_skip_timer_override flag already:
+	 */
+	if (!acpi_skip_timer_override) {
+		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
+		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+			d->ident);
+		acpi_skip_timer_override = 1;
+	}
 	return 0;
 }
 
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 148fcfe..4cd8083 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -723,9 +723,7 @@
 	init_iommu_from_acpi(iommu, h);
 	init_iommu_devices(iommu);
 
-	pci_enable_device(iommu->dev);
-
-	return 0;
+	return pci_enable_device(iommu->dev);
 }
 
 /*
diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c
index a47798b..395acb1 100644
--- a/arch/x86/kernel/doublefault_32.c
+++ b/arch/x86/kernel/doublefault_32.c
@@ -66,6 +66,6 @@
 		.ds		= __USER_DS,
 		.fs		= __KERNEL_PERCPU,
 
-		.__cr3		= __pa(swapper_pg_dir)
+		.__cr3		= __phys_addr_const((unsigned long)swapper_pg_dir)
 	}
 };
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 24bb5fa..733c4f8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -95,6 +95,52 @@
 
 }
 
+static u32 ati_ixp4x0_rev(int num, int slot, int func)
+{
+	u32 d;
+	u8  b;
+
+	b = read_pci_config_byte(num, slot, func, 0xac);
+	b &= ~(1<<5);
+	write_pci_config_byte(num, slot, func, 0xac, b);
+
+	d = read_pci_config(num, slot, func, 0x70);
+	d |= 1<<8;
+	write_pci_config(num, slot, func, 0x70, d);
+
+	d = read_pci_config(num, slot, func, 0x8);
+	d &= 0xff;
+	return d;
+}
+
+static void __init ati_bugs(int num, int slot, int func)
+{
+#if defined(CONFIG_ACPI) && defined (CONFIG_X86_IO_APIC)
+	u32 d;
+	u8  b;
+
+	if (acpi_use_timer_override)
+		return;
+
+	d = ati_ixp4x0_rev(num, slot, func);
+	if (d  < 0x82)
+		acpi_skip_timer_override = 1;
+	else {
+		/* check for IRQ0 interrupt swap */
+		outb(0x72, 0xcd6); b = inb(0xcd7);
+		if (!(b & 0x2))
+			acpi_skip_timer_override = 1;
+	}
+
+	if (acpi_skip_timer_override) {
+		printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
+		printk(KERN_INFO "Ignoring ACPI timer override.\n");
+		printk(KERN_INFO "If you got timer trouble "
+		       "try acpi_use_timer_override\n");
+	}
+#endif
+}
+
 #ifdef CONFIG_DMAR
 static void __init intel_g33_dmar(int num, int slot, int func)
 {
@@ -128,6 +174,8 @@
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
 #ifdef CONFIG_DMAR
 	{ PCI_VENDOR_ID_INTEL, 0x29c0,
 	  PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar },
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index ff9e735..34ad997 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -3,11 +3,19 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/screen_info.h>
+#include <linux/usb/ch9.h>
+#include <linux/pci_regs.h>
+#include <linux/pci_ids.h>
+#include <linux/errno.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/fcntl.h>
 #include <asm/setup.h>
 #include <xen/hvc-console.h>
+#include <asm/pci-direct.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include <linux/usb/ehci_def.h>
 
 /* Simple VGA output */
 #define VGABASE		(__ISA_IO_base + 0xb8000)
@@ -78,6 +86,7 @@
 static int early_serial_putc(unsigned char ch)
 {
 	unsigned timeout = 0xffff;
+
 	while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
 		cpu_relax();
 	outb(ch, early_serial_base + TXR);
@@ -111,7 +120,7 @@
 		if (!strncmp(s, "0x", 2)) {
 			early_serial_base = simple_strtoul(s, &e, 16);
 		} else {
-			static int bases[] = { 0x3f8, 0x2f8 };
+			static const int __initconst bases[] = { 0x3f8, 0x2f8 };
 
 			if (!strncmp(s, "ttyS", 4))
 				s += 4;
@@ -151,6 +160,721 @@
 	.index =	-1,
 };
 
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+
+static struct ehci_caps __iomem *ehci_caps;
+static struct ehci_regs __iomem *ehci_regs;
+static struct ehci_dbg_port __iomem *ehci_debug;
+static unsigned int dbgp_endpoint_out;
+
+struct ehci_dev {
+	u32 bus;
+	u32 slot;
+	u32 func;
+};
+
+static struct ehci_dev ehci_dev;
+
+#define USB_DEBUG_DEVNUM 127
+
+#define DBGP_DATA_TOGGLE	0x8800
+
+static inline u32 dbgp_pid_update(u32 x, u32 tok)
+{
+	return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
+}
+
+static inline u32 dbgp_len_update(u32 x, u32 len)
+{
+	return (x & ~0x0f) | (len & 0x0f);
+}
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+
+/* token */
+#define USB_PID_OUT		0xe1
+#define USB_PID_IN		0x69
+#define USB_PID_SOF		0xa5
+#define USB_PID_SETUP		0x2d
+/* handshake */
+#define USB_PID_ACK		0xd2
+#define USB_PID_NAK		0x5a
+#define USB_PID_STALL		0x1e
+#define USB_PID_NYET		0x96
+/* data */
+#define USB_PID_DATA0		0xc3
+#define USB_PID_DATA1		0x4b
+#define USB_PID_DATA2		0x87
+#define USB_PID_MDATA		0x0f
+/* Special */
+#define USB_PID_PREAMBLE	0x3c
+#define USB_PID_ERR		0x3c
+#define USB_PID_SPLIT		0x78
+#define USB_PID_PING		0xb4
+#define USB_PID_UNDEF_0		0xf0
+
+#define USB_PID_DATA_TOGGLE	0x88
+#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
+
+#define PCI_CAP_ID_EHCI_DEBUG	0xa
+
+#define HUB_ROOT_RESET_TIME	50	/* times are in msec */
+#define HUB_SHORT_RESET_TIME	10
+#define HUB_LONG_RESET_TIME	200
+#define HUB_RESET_TIMEOUT	500
+
+#define DBGP_MAX_PACKET		8
+
+static int dbgp_wait_until_complete(void)
+{
+	u32 ctrl;
+	int loop = 0x100000;
+
+	do {
+		ctrl = readl(&ehci_debug->control);
+		/* Stop when the transaction is finished */
+		if (ctrl & DBGP_DONE)
+			break;
+	} while (--loop > 0);
+
+	if (!loop)
+		return -1;
+
+	/*
+	 * Now that we have observed the completed transaction,
+	 * clear the done bit.
+	 */
+	writel(ctrl | DBGP_DONE, &ehci_debug->control);
+	return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
+}
+
+static void dbgp_mdelay(int ms)
+{
+	int i;
+
+	while (ms--) {
+		for (i = 0; i < 1000; i++)
+			outb(0x1, 0x80);
+	}
+}
+
+static void dbgp_breath(void)
+{
+	/* Sleep to give the debug port a chance to breathe */
+}
+
+static int dbgp_wait_until_done(unsigned ctrl)
+{
+	u32 pids, lpid;
+	int ret;
+	int loop = 3;
+
+retry:
+	writel(ctrl | DBGP_GO, &ehci_debug->control);
+	ret = dbgp_wait_until_complete();
+	pids = readl(&ehci_debug->pids);
+	lpid = DBGP_PID_GET(pids);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * If the port is getting full or it has dropped data
+	 * start pacing ourselves, not necessary but it's friendly.
+	 */
+	if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
+		dbgp_breath();
+
+	/* If I get a NACK reissue the transmission */
+	if (lpid == USB_PID_NAK) {
+		if (--loop > 0)
+			goto retry;
+	}
+
+	return ret;
+}
+
+static void dbgp_set_data(const void *buf, int size)
+{
+	const unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = hi = 0;
+	for (i = 0; i < 4 && i < size; i++)
+		lo |= bytes[i] << (8*i);
+	for (; i < 8 && i < size; i++)
+		hi |= bytes[i] << (8*(i - 4));
+	writel(lo, &ehci_debug->data03);
+	writel(hi, &ehci_debug->data47);
+}
+
+static void dbgp_get_data(void *buf, int size)
+{
+	unsigned char *bytes = buf;
+	u32 lo, hi;
+	int i;
+
+	lo = readl(&ehci_debug->data03);
+	hi = readl(&ehci_debug->data47);
+	for (i = 0; i < 4 && i < size; i++)
+		bytes[i] = (lo >> (8*i)) & 0xff;
+	for (; i < 8 && i < size; i++)
+		bytes[i] = (hi >> (8*(i - 4))) & 0xff;
+}
+
+static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
+			 const char *bytes, int size)
+{
+	u32 pids, addr, ctrl;
+	int ret;
+
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_update(pids, USB_PID_OUT);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	dbgp_set_data(bytes, size);
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
+				 int size)
+{
+	u32 pids, addr, ctrl;
+	int ret;
+
+	if (size > DBGP_MAX_PACKET)
+		return -1;
+
+	addr = DBGP_EPADDR(devnum, endpoint);
+
+	pids = readl(&ehci_debug->pids);
+	pids = dbgp_pid_update(pids, USB_PID_IN);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, size);
+	ctrl &= ~DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	if (size > ret)
+		size = ret;
+	dbgp_get_data(data, size);
+	return ret;
+}
+
+static int dbgp_control_msg(unsigned devnum, int requesttype, int request,
+	int value, int index, void *data, int size)
+{
+	u32 pids, addr, ctrl;
+	struct usb_ctrlrequest req;
+	int read;
+	int ret;
+
+	read = (requesttype & USB_DIR_IN) != 0;
+	if (size > (read ? DBGP_MAX_PACKET:0))
+		return -1;
+
+	/* Compute the control message */
+	req.bRequestType = requesttype;
+	req.bRequest = request;
+	req.wValue = cpu_to_le16(value);
+	req.wIndex = cpu_to_le16(index);
+	req.wLength = cpu_to_le16(size);
+
+	pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
+	addr = DBGP_EPADDR(devnum, 0);
+
+	ctrl = readl(&ehci_debug->control);
+	ctrl = dbgp_len_update(ctrl, sizeof(req));
+	ctrl |= DBGP_OUT;
+	ctrl |= DBGP_GO;
+
+	/* Send the setup message */
+	dbgp_set_data(&req, sizeof(req));
+	writel(addr, &ehci_debug->address);
+	writel(pids, &ehci_debug->pids);
+	ret = dbgp_wait_until_done(ctrl);
+	if (ret < 0)
+		return ret;
+
+	/* Read the result */
+	return dbgp_bulk_read(devnum, 0, data, size);
+}
+
+
+/* Find a PCI capability */
+static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
+{
+	u8 pos;
+	int bytes;
+
+	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+		PCI_STATUS_CAP_LIST))
+		return 0;
+
+	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
+		u8 id;
+
+		pos &= ~3;
+		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+
+		pos = read_pci_config_byte(num, slot, func,
+						 pos+PCI_CAP_LIST_NEXT);
+	}
+	return 0;
+}
+
+static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
+{
+	u32 class;
+
+	class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
+	if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
+		return 0;
+
+	return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
+}
+
+static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
+{
+	u32 bus, slot, func;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				unsigned cap;
+
+				cap = __find_dbgp(bus, slot, func);
+
+				if (!cap)
+					continue;
+				if (ehci_num-- != 0)
+					continue;
+				*rbus = bus;
+				*rslot = slot;
+				*rfunc = func;
+				return cap;
+			}
+		}
+	}
+	return 0;
+}
+
+static int ehci_reset_port(int port)
+{
+	u32 portsc;
+	u32 delay_time, delay;
+	int loop;
+
+	/* Reset the usb debug port */
+	portsc = readl(&ehci_regs->port_status[port - 1]);
+	portsc &= ~PORT_PE;
+	portsc |= PORT_RESET;
+	writel(portsc, &ehci_regs->port_status[port - 1]);
+
+	delay = HUB_ROOT_RESET_TIME;
+	for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
+	     delay_time += delay) {
+		dbgp_mdelay(delay);
+
+		portsc = readl(&ehci_regs->port_status[port - 1]);
+		if (portsc & PORT_RESET) {
+			/* force reset to complete */
+			loop = 2;
+			writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
+				&ehci_regs->port_status[port - 1]);
+			do {
+				portsc = readl(&ehci_regs->port_status[port-1]);
+			} while ((portsc & PORT_RESET) && (--loop > 0));
+		}
+
+		/* Device went away? */
+		if (!(portsc & PORT_CONNECT))
+			return -ENOTCONN;
+
+		/* bomb out completely if something weird happend */
+		if ((portsc & PORT_CSC))
+			return -EINVAL;
+
+		/* If we've finished resetting, then break out of the loop */
+		if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
+			return 0;
+	}
+	return -EBUSY;
+}
+
+static int ehci_wait_for_port(int port)
+{
+	u32 status;
+	int ret, reps;
+
+	for (reps = 0; reps < 3; reps++) {
+		dbgp_mdelay(100);
+		status = readl(&ehci_regs->status);
+		if (status & STS_PCD) {
+			ret = ehci_reset_port(port);
+			if (ret == 0)
+				return 0;
+		}
+	}
+	return -ENOTCONN;
+}
+
+#ifdef DBGP_DEBUG
+# define dbgp_printk early_printk
+#else
+static inline void dbgp_printk(const char *fmt, ...) { }
+#endif
+
+typedef void (*set_debug_port_t)(int port);
+
+static void default_set_debug_port(int port)
+{
+}
+
+static set_debug_port_t set_debug_port = default_set_debug_port;
+
+static void nvidia_set_debug_port(int port)
+{
+	u32 dword;
+	dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+				 0x74);
+	dword &= ~(0x0f<<12);
+	dword |= ((port & 0x0f)<<12);
+	write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
+				 dword);
+	dbgp_printk("set debug port to %d\n", port);
+}
+
+static void __init detect_set_debug_port(void)
+{
+	u32 vendorid;
+
+	vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+		 0x00);
+
+	if ((vendorid & 0xffff) == 0x10de) {
+		dbgp_printk("using nvidia set_debug_port\n");
+		set_debug_port = nvidia_set_debug_port;
+	}
+}
+
+static int __init ehci_setup(void)
+{
+	struct usb_debug_descriptor dbgp_desc;
+	u32 cmd, ctrl, status, portsc, hcs_params;
+	u32 debug_port, new_debug_port = 0, n_ports;
+	u32  devnum;
+	int ret, i;
+	int loop;
+	int port_map_tried;
+	int playtimes = 3;
+
+try_next_time:
+	port_map_tried = 0;
+
+try_next_port:
+
+	hcs_params = readl(&ehci_caps->hcs_params);
+	debug_port = HCS_DEBUG_PORT(hcs_params);
+	n_ports    = HCS_N_PORTS(hcs_params);
+
+	dbgp_printk("debug_port: %d\n", debug_port);
+	dbgp_printk("n_ports:    %d\n", n_ports);
+
+	for (i = 1; i <= n_ports; i++) {
+		portsc = readl(&ehci_regs->port_status[i-1]);
+		dbgp_printk("portstatus%d: %08x\n", i, portsc);
+	}
+
+	if (port_map_tried && (new_debug_port != debug_port)) {
+		if (--playtimes) {
+			set_debug_port(new_debug_port);
+			goto try_next_time;
+		}
+		return -1;
+	}
+
+	loop = 10;
+	/* Reset the EHCI controller */
+	cmd = readl(&ehci_regs->command);
+	cmd |= CMD_RESET;
+	writel(cmd, &ehci_regs->command);
+	do {
+		cmd = readl(&ehci_regs->command);
+	} while ((cmd & CMD_RESET) && (--loop > 0));
+
+	if (!loop) {
+		dbgp_printk("can not reset ehci\n");
+		return -1;
+	}
+	dbgp_printk("ehci reset done\n");
+
+	/* Claim ownership, but do not enable yet */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_OWNER;
+	ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
+	writel(ctrl, &ehci_debug->control);
+
+	/* Start the ehci running */
+	cmd = readl(&ehci_regs->command);
+	cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
+	cmd |= CMD_RUN;
+	writel(cmd, &ehci_regs->command);
+
+	/* Ensure everything is routed to the EHCI */
+	writel(FLAG_CF, &ehci_regs->configured_flag);
+
+	/* Wait until the controller is no longer halted */
+	loop = 10;
+	do {
+		status = readl(&ehci_regs->status);
+	} while ((status & STS_HALT) && (--loop > 0));
+
+	if (!loop) {
+		dbgp_printk("ehci can be started\n");
+		return -1;
+	}
+	dbgp_printk("ehci started\n");
+
+	/* Wait for a device to show up in the debug port */
+	ret = ehci_wait_for_port(debug_port);
+	if (ret < 0) {
+		dbgp_printk("No device found in debug port\n");
+		goto next_debug_port;
+	}
+	dbgp_printk("ehci wait for port done\n");
+
+	/* Enable the debug port */
+	ctrl = readl(&ehci_debug->control);
+	ctrl |= DBGP_CLAIM;
+	writel(ctrl, &ehci_debug->control);
+	ctrl = readl(&ehci_debug->control);
+	if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
+		dbgp_printk("No device in debug port\n");
+		writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
+		goto err;
+	}
+	dbgp_printk("debug ported enabled\n");
+
+	/* Completely transfer the debug device to the debug controller */
+	portsc = readl(&ehci_regs->port_status[debug_port - 1]);
+	portsc &= ~PORT_PE;
+	writel(portsc, &ehci_regs->port_status[debug_port - 1]);
+
+	dbgp_mdelay(100);
+
+	/* Find the debug device and make it device number 127 */
+	for (devnum = 0; devnum <= 127; devnum++) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
+			&dbgp_desc, sizeof(dbgp_desc));
+		if (ret > 0)
+			break;
+	}
+	if (devnum > 127) {
+		dbgp_printk("Could not find attached debug device\n");
+		goto err;
+	}
+	if (ret < 0) {
+		dbgp_printk("Attached device is not a debug device\n");
+		goto err;
+	}
+	dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
+
+	/* Move the device to 127 if it isn't already there */
+	if (devnum != USB_DEBUG_DEVNUM) {
+		ret = dbgp_control_msg(devnum,
+			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+			USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
+		if (ret < 0) {
+			dbgp_printk("Could not move attached device to %d\n",
+				USB_DEBUG_DEVNUM);
+			goto err;
+		}
+		devnum = USB_DEBUG_DEVNUM;
+		dbgp_printk("debug device renamed to 127\n");
+	}
+
+	/* Enable the debug interface */
+	ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
+		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+		USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
+	if (ret < 0) {
+		dbgp_printk(" Could not enable the debug device\n");
+		goto err;
+	}
+	dbgp_printk("debug interface enabled\n");
+
+	/* Perform a small write to get the even/odd data state in sync
+	 */
+	ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
+	if (ret < 0) {
+		dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
+		goto err;
+	}
+	dbgp_printk("small write doned\n");
+
+	return 0;
+err:
+	/* Things didn't work so remove my claim */
+	ctrl = readl(&ehci_debug->control);
+	ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
+	writel(ctrl, &ehci_debug->control);
+	return -1;
+
+next_debug_port:
+	port_map_tried |= (1<<(debug_port - 1));
+	new_debug_port = ((debug_port-1+1)%n_ports) + 1;
+	if (port_map_tried != ((1<<n_ports) - 1)) {
+		set_debug_port(new_debug_port);
+		goto try_next_port;
+	}
+	if (--playtimes) {
+		set_debug_port(new_debug_port);
+		goto try_next_time;
+	}
+
+	return -1;
+}
+
+static int __init early_dbgp_init(char *s)
+{
+	u32 debug_port, bar, offset;
+	u32 bus, slot, func, cap;
+	void __iomem *ehci_bar;
+	u32 dbgp_num;
+	u32 bar_val;
+	char *e;
+	int ret;
+	u8 byte;
+
+	if (!early_pci_allowed())
+		return -1;
+
+	dbgp_num = 0;
+	if (*s)
+		dbgp_num = simple_strtoul(s, &e, 10);
+	dbgp_printk("dbgp_num: %d\n", dbgp_num);
+
+	cap = find_dbgp(dbgp_num, &bus, &slot, &func);
+	if (!cap)
+		return -1;
+
+	dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
+			 func);
+
+	debug_port = read_pci_config(bus, slot, func, cap);
+	bar = (debug_port >> 29) & 0x7;
+	bar = (bar * 4) + 0xc;
+	offset = (debug_port >> 16) & 0xfff;
+	dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
+	if (bar != PCI_BASE_ADDRESS_0) {
+		dbgp_printk("only debug ports on bar 1 handled.\n");
+
+		return -1;
+	}
+
+	bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+	dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
+	if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
+		dbgp_printk("only simple 32bit mmio bars supported\n");
+
+		return -1;
+	}
+
+	/* double check if the mem space is enabled */
+	byte = read_pci_config_byte(bus, slot, func, 0x04);
+	if (!(byte & 0x2)) {
+		byte  |= 0x02;
+		write_pci_config_byte(bus, slot, func, 0x04, byte);
+		dbgp_printk("mmio for ehci enabled\n");
+	}
+
+	/*
+	 * FIXME I don't have the bar size so just guess PAGE_SIZE is more
+	 * than enough.  1K is the biggest I have seen.
+	 */
+	set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
+	ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
+	ehci_bar += bar_val & ~PAGE_MASK;
+	dbgp_printk("ehci_bar: %p\n", ehci_bar);
+
+	ehci_caps  = ehci_bar;
+	ehci_regs  = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase));
+	ehci_debug = ehci_bar + offset;
+	ehci_dev.bus = bus;
+	ehci_dev.slot = slot;
+	ehci_dev.func = func;
+
+	detect_set_debug_port();
+
+	ret = ehci_setup();
+	if (ret < 0) {
+		dbgp_printk("ehci_setup failed\n");
+		ehci_debug = NULL;
+
+		return -1;
+	}
+
+	return 0;
+}
+
+static void early_dbgp_write(struct console *con, const char *str, u32 n)
+{
+	int chunk, ret;
+
+	if (!ehci_debug)
+		return;
+	while (n > 0) {
+		chunk = n;
+		if (chunk > DBGP_MAX_PACKET)
+			chunk = DBGP_MAX_PACKET;
+		ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
+			dbgp_endpoint_out, str, chunk);
+		str += chunk;
+		n -= chunk;
+	}
+}
+
+static struct console early_dbgp_console = {
+	.name =		"earlydbg",
+	.write =	early_dbgp_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+#endif
+
 /* Console interface to a host file on AMD's SimNow! */
 
 static int simnow_fd;
@@ -165,6 +889,7 @@
 static noinline long simnow(long cmd, long a, long b, long c)
 {
 	long ret;
+
 	asm volatile("cpuid" :
 		     "=a" (ret) :
 		     "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2));
@@ -174,6 +899,7 @@
 static void __init simnow_init(char *str)
 {
 	char *fn = "klog";
+
 	if (*str == '=')
 		fn = ++str;
 	/* error ignored */
@@ -194,7 +920,7 @@
 
 /* Direct interface for emergencies */
 static struct console *early_console = &early_vga_console;
-static int early_console_initialized;
+static int __initdata early_console_initialized;
 
 asmlinkage void early_printk(const char *fmt, ...)
 {
@@ -208,10 +934,11 @@
 	va_end(ap);
 }
 
-static int __initdata keep_early;
 
 static int __init setup_early_printk(char *buf)
 {
+	int keep_early;
+
 	if (!buf)
 		return 0;
 
@@ -219,8 +946,7 @@
 		return 0;
 	early_console_initialized = 1;
 
-	if (strstr(buf, "keep"))
-		keep_early = 1;
+	keep_early = (strstr(buf, "keep") != NULL);
 
 	if (!strncmp(buf, "serial", 6)) {
 		early_serial_init(buf + 6);
@@ -238,6 +964,17 @@
 		simnow_init(buf + 6);
 		early_console = &simnow_console;
 		keep_early = 1;
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+	} else if (!strncmp(buf, "dbgp", 4)) {
+		if (early_dbgp_init(buf+4) < 0)
+			return 0;
+		early_console = &early_dbgp_console;
+		/*
+		 * usb subsys will reset ehci controller, so don't keep
+		 * that early console
+		 */
+		keep_early = 0;
+#endif
 #ifdef CONFIG_HVC_XEN
 	} else if (!strncmp(buf, "xen", 3)) {
 		early_console = &xenboot_console;
@@ -251,4 +988,5 @@
 	register_console(early_console);
 	return 0;
 }
+
 early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 45723f1..1f20608 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -468,9 +468,23 @@
 
 static int save_i387_xsave(void __user *buf)
 {
+	struct task_struct *tsk = current;
 	struct _fpstate_ia32 __user *fx = buf;
 	int err = 0;
 
+	/*
+	 * For legacy compatible, we always set FP/SSE bits in the bit
+	 * vector while saving the state to the user context.
+	 * This will enable us capturing any changes(during sigreturn) to
+	 * the FP/SSE bits by the legacy applications which don't touch
+	 * xstate_bv in the xsave header.
+	 *
+	 * xsave aware applications can change the xstate_bv in the xsave
+	 * header as well as change any contents in the memory layout.
+	 * xrestore as part of sigreturn will capture all the changes.
+	 */
+	tsk->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+
 	if (save_i387_fxsave(fx) < 0)
 		return -1;
 
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index a1bec29..02063ae 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -1281,8 +1281,8 @@
 	printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
 
 	icr = apic_icr_read();
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", icr);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32);
+	printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr);
+	printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32));
 
 	v = apic_read(APIC_LVTT);
 	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
deleted file mode 100644
index 652fa5c..0000000
--- a/arch/x86/kernel/microcode.c
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- *	Intel CPU Microcode Update Driver for Linux
- *
- *	Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
- *		      2006	Shaohua Li <shaohua.li@intel.com>
- *
- *	This driver allows to upgrade microcode on Intel processors
- *	belonging to IA-32 family - PentiumPro, Pentium II,
- *	Pentium III, Xeon, Pentium 4, etc.
- *
- *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
- *	Software Developer's Manual
- *	Order Number 253668 or free download from:
- *
- *	http://developer.intel.com/design/pentium4/manuals/253668.htm
- *
- *	For more information, go to http://www.urbanmyth.org/microcode
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- *	1.0	16 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Initial release.
- *	1.01	18 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Added read() support + cleanups.
- *	1.02	21 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Added 'device trimming' support. open(O_WRONLY) zeroes
- *		and frees the saved copy of applied microcode.
- *	1.03	29 Feb 2000, Tigran Aivazian <tigran@sco.com>
- *		Made to use devfs (/dev/cpu/microcode) + cleanups.
- *	1.04	06 Jun 2000, Simon Trimmer <simon@veritas.com>
- *		Added misc device support (now uses both devfs and misc).
- *		Added MICROCODE_IOCFREE ioctl to clear memory.
- *	1.05	09 Jun 2000, Simon Trimmer <simon@veritas.com>
- *		Messages for error cases (non Intel & no suitable microcode).
- *	1.06	03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
- *		Removed ->release(). Removed exclusive open and status bitmap.
- *		Added microcode_rwsem to serialize read()/write()/ioctl().
- *		Removed global kernel lock usage.
- *	1.07	07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
- *		Write 0 to 0x8B msr and then cpuid before reading revision,
- *		so that it works even if there were no update done by the
- *		BIOS. Otherwise, reading from 0x8B gives junk (which happened
- *		to be 0 on my machine which is why it worked even when I
- *		disabled update by the BIOS)
- *		Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
- *	1.08	11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
- *			     Tigran Aivazian <tigran@veritas.com>
- *		Intel Pentium 4 processor support and bugfixes.
- *	1.09	30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
- *		Bugfix for HT (Hyper-Threading) enabled processors
- *		whereby processor resources are shared by all logical processors
- *		in a single CPU package.
- *	1.10	28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
- *		Tigran Aivazian <tigran@veritas.com>,
- *		Serialize updates as required on HT processors due to speculative
- *		nature of implementation.
- *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
- *		Fix the panic when writing zero-length microcode chunk.
- *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
- *		Jun Nakajima <jun.nakajima@intel.com>
- *		Support for the microcode updates in the new format.
- *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
- *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
- *		because we no longer hold a copy of applied microcode
- *		in kernel memory.
- *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
- *		Fix sigmatch() macro to handle old CPUs with pf == 0.
- *		Thanks to Stuart Swales for pointing out this bug.
- */
-
-//#define DEBUG /* pr_debug */
-#include <linux/capability.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/cpumask.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/mutex.h>
-#include <linux/cpu.h>
-#include <linux/firmware.h>
-#include <linux/platform_device.h>
-
-#include <asm/msr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-
-MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver");
-MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
-MODULE_LICENSE("GPL");
-
-#define MICROCODE_VERSION 	"1.14a"
-
-#define DEFAULT_UCODE_DATASIZE 	(2000) 	  /* 2000 bytes */
-#define MC_HEADER_SIZE		(sizeof (microcode_header_t))  	  /* 48 bytes */
-#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */
-#define EXT_HEADER_SIZE		(sizeof (struct extended_sigtable)) /* 20 bytes */
-#define EXT_SIGNATURE_SIZE	(sizeof (struct extended_signature)) /* 12 bytes */
-#define DWSIZE			(sizeof (u32))
-#define get_totalsize(mc) \
-	(((microcode_t *)mc)->hdr.totalsize ? \
-	 ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE)
-#define get_datasize(mc) \
-	(((microcode_t *)mc)->hdr.datasize ? \
-	 ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
-
-#define sigmatch(s1, s2, p1, p2) \
-	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
-
-#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-
-/* serialize access to the physical write to MSR 0x79 */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
-/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
-static DEFINE_MUTEX(microcode_mutex);
-
-static struct ucode_cpu_info {
-	int valid;
-	unsigned int sig;
-	unsigned int pf;
-	unsigned int rev;
-	microcode_t *mc;
-} ucode_cpu_info[NR_CPUS];
-
-static void collect_cpu_info(int cpu_num)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-	unsigned int val[2];
-
-	/* We should bind the task to the CPU */
-	BUG_ON(raw_smp_processor_id() != cpu_num);
-	uci->pf = uci->rev = 0;
-	uci->mc = NULL;
-	uci->valid = 1;
-
-	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
-	    	cpu_has(c, X86_FEATURE_IA64)) {
-		printk(KERN_ERR "microcode: CPU%d not a capable Intel "
-			"processor\n", cpu_num);
-		uci->valid = 0;
-		return;
-	}
-
-	uci->sig = cpuid_eax(0x00000001);
-
-	if ((c->x86_model >= 5) || (c->x86 > 6)) {
-		/* get processor flags from MSR 0x17 */
-		rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
-		uci->pf = 1 << ((val[1] >> 18) & 7);
-	}
-
-	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-	/* see notes above for revision 1.07.  Apparent chip bug */
-	sync_core();
-	/* get the current revision from MSR 0x8B */
-	rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev);
-	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
-			uci->sig, uci->pf, uci->rev);
-}
-
-static inline int microcode_update_match(int cpu_num,
-	microcode_header_t *mc_header, int sig, int pf)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
-	if (!sigmatch(sig, uci->sig, pf, uci->pf)
-		|| mc_header->rev <= uci->rev)
-		return 0;
-	return 1;
-}
-
-static int microcode_sanity_check(void *mc)
-{
-	microcode_header_t *mc_header = mc;
-	struct extended_sigtable *ext_header = NULL;
-	struct extended_signature *ext_sig;
-	unsigned long total_size, data_size, ext_table_size;
-	int sum, orig_sum, ext_sigcount = 0, i;
-
-	total_size = get_totalsize(mc_header);
-	data_size = get_datasize(mc_header);
-	if (data_size + MC_HEADER_SIZE > total_size) {
-		printk(KERN_ERR "microcode: error! "
-			"Bad data size in microcode data file\n");
-		return -EINVAL;
-	}
-
-	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
-		printk(KERN_ERR "microcode: error! "
-			"Unknown microcode update format\n");
-		return -EINVAL;
-	}
-	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
-	if (ext_table_size) {
-		if ((ext_table_size < EXT_HEADER_SIZE)
-		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
-			printk(KERN_ERR "microcode: error! "
-				"Small exttable size in microcode data file\n");
-			return -EINVAL;
-		}
-		ext_header = mc + MC_HEADER_SIZE + data_size;
-		if (ext_table_size != exttable_size(ext_header)) {
-			printk(KERN_ERR "microcode: error! "
-				"Bad exttable size in microcode data file\n");
-			return -EFAULT;
-		}
-		ext_sigcount = ext_header->count;
-	}
-
-	/* check extended table checksum */
-	if (ext_table_size) {
-		int ext_table_sum = 0;
-		int *ext_tablep = (int *)ext_header;
-
-		i = ext_table_size / DWSIZE;
-		while (i--)
-			ext_table_sum += ext_tablep[i];
-		if (ext_table_sum) {
-			printk(KERN_WARNING "microcode: aborting, "
-				"bad extended signature table checksum\n");
-			return -EINVAL;
-		}
-	}
-
-	/* calculate the checksum */
-	orig_sum = 0;
-	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
-	while (i--)
-		orig_sum += ((int *)mc)[i];
-	if (orig_sum) {
-		printk(KERN_ERR "microcode: aborting, bad checksum\n");
-		return -EINVAL;
-	}
-	if (!ext_table_size)
-		return 0;
-	/* check extended signature checksum */
-	for (i = 0; i < ext_sigcount; i++) {
-		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
-			  EXT_SIGNATURE_SIZE * i;
-		sum = orig_sum
-			- (mc_header->sig + mc_header->pf + mc_header->cksum)
-			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
-		if (sum) {
-			printk(KERN_ERR "microcode: aborting, bad checksum\n");
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
-/*
- * return 0 - no update found
- * return 1 - found update
- * return < 0 - error
- */
-static int get_maching_microcode(void *mc, int cpu)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	microcode_header_t *mc_header = mc;
-	struct extended_sigtable *ext_header;
-	unsigned long total_size = get_totalsize(mc_header);
-	int ext_sigcount, i;
-	struct extended_signature *ext_sig;
-	void *new_mc;
-
-	if (microcode_update_match(cpu, mc_header,
-			mc_header->sig, mc_header->pf))
-		goto find;
-
-	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
-		return 0;
-
-	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
-	ext_sigcount = ext_header->count;
-	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
-	for (i = 0; i < ext_sigcount; i++) {
-		if (microcode_update_match(cpu, mc_header,
-				ext_sig->sig, ext_sig->pf))
-			goto find;
-		ext_sig++;
-	}
-	return 0;
-find:
-	pr_debug("microcode: CPU%d found a matching microcode update with"
-		" version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev);
-	new_mc = vmalloc(total_size);
-	if (!new_mc) {
-		printk(KERN_ERR "microcode: error! Can not allocate memory\n");
-		return -ENOMEM;
-	}
-
-	/* free previous update file */
-	vfree(uci->mc);
-
-	memcpy(new_mc, mc, total_size);
-	uci->mc = new_mc;
-	return 1;
-}
-
-static void apply_microcode(int cpu)
-{
-	unsigned long flags;
-	unsigned int val[2];
-	int cpu_num = raw_smp_processor_id();
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu_num != cpu);
-
-	if (uci->mc == NULL)
-		return;
-
-	/* serialize access to the physical write to MSR 0x79 */
-	spin_lock_irqsave(&microcode_update_lock, flags);
-
-	/* write microcode via MSR 0x79 */
-	wrmsr(MSR_IA32_UCODE_WRITE,
-		(unsigned long) uci->mc->bits,
-		(unsigned long) uci->mc->bits >> 16 >> 16);
-	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-
-	/* see notes above for revision 1.07.  Apparent chip bug */
-	sync_core();
-
-	/* get the current revision from MSR 0x8B */
-	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-
-	spin_unlock_irqrestore(&microcode_update_lock, flags);
-	if (val[1] != uci->mc->hdr.rev) {
-		printk(KERN_ERR "microcode: CPU%d update from revision "
-			"0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]);
-		return;
-	}
-	printk(KERN_INFO "microcode: CPU%d updated from revision "
-	       "0x%x to 0x%x, date = %08x \n",
-	       cpu_num, uci->rev, val[1], uci->mc->hdr.date);
-	uci->rev = val[1];
-}
-
-#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-static void __user *user_buffer;	/* user area microcode data buffer */
-static unsigned int user_buffer_size;	/* it's size */
-
-static long get_next_ucode(void **mc, long offset)
-{
-	microcode_header_t mc_header;
-	unsigned long total_size;
-
-	/* No more data */
-	if (offset >= user_buffer_size)
-		return 0;
-	if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) {
-		printk(KERN_ERR "microcode: error! Can not read user data\n");
-		return -EFAULT;
-	}
-	total_size = get_totalsize(&mc_header);
-	if (offset + total_size > user_buffer_size) {
-		printk(KERN_ERR "microcode: error! Bad total size in microcode "
-				"data file\n");
-		return -EINVAL;
-	}
-	*mc = vmalloc(total_size);
-	if (!*mc)
-		return -ENOMEM;
-	if (copy_from_user(*mc, user_buffer + offset, total_size)) {
-		printk(KERN_ERR "microcode: error! Can not read user data\n");
-		vfree(*mc);
-		return -EFAULT;
-	}
-	return offset + total_size;
-}
-
-static int do_microcode_update (void)
-{
-	long cursor = 0;
-	int error = 0;
-	void *new_mc = NULL;
-	int cpu;
-	cpumask_t old;
-
-	old = current->cpus_allowed;
-
-	while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) {
-		error = microcode_sanity_check(new_mc);
-		if (error)
-			goto out;
-		/*
-		 * It's possible the data file has multiple matching ucode,
-		 * lets keep searching till the latest version
-		 */
-		for_each_online_cpu(cpu) {
-			struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-			if (!uci->valid)
-				continue;
-			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-			error = get_maching_microcode(new_mc, cpu);
-			if (error < 0)
-				goto out;
-			if (error == 1)
-				apply_microcode(cpu);
-		}
-		vfree(new_mc);
-	}
-out:
-	if (cursor > 0)
-		vfree(new_mc);
-	if (cursor < 0)
-		error = cursor;
-	set_cpus_allowed_ptr(current, &old);
-	return error;
-}
-
-static int microcode_open (struct inode *unused1, struct file *unused2)
-{
-	cycle_kernel_lock();
-	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
-}
-
-static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
-	ssize_t ret;
-
-	if ((len >> PAGE_SHIFT) > num_physpages) {
-		printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages);
-		return -EINVAL;
-	}
-
-	get_online_cpus();
-	mutex_lock(&microcode_mutex);
-
-	user_buffer = (void __user *) buf;
-	user_buffer_size = (int) len;
-
-	ret = do_microcode_update();
-	if (!ret)
-		ret = (ssize_t)len;
-
-	mutex_unlock(&microcode_mutex);
-	put_online_cpus();
-
-	return ret;
-}
-
-static const struct file_operations microcode_fops = {
-	.owner		= THIS_MODULE,
-	.write		= microcode_write,
-	.open		= microcode_open,
-};
-
-static struct miscdevice microcode_dev = {
-	.minor		= MICROCODE_MINOR,
-	.name		= "microcode",
-	.fops		= &microcode_fops,
-};
-
-static int __init microcode_dev_init (void)
-{
-	int error;
-
-	error = misc_register(&microcode_dev);
-	if (error) {
-		printk(KERN_ERR
-			"microcode: can't misc_register on minor=%d\n",
-			MICROCODE_MINOR);
-		return error;
-	}
-
-	return 0;
-}
-
-static void microcode_dev_exit (void)
-{
-	misc_deregister(&microcode_dev);
-}
-
-MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
-#else
-#define microcode_dev_init() 0
-#define microcode_dev_exit() do { } while(0)
-#endif
-
-static long get_next_ucode_from_buffer(void **mc, const u8 *buf,
-	unsigned long size, long offset)
-{
-	microcode_header_t *mc_header;
-	unsigned long total_size;
-
-	/* No more data */
-	if (offset >= size)
-		return 0;
-	mc_header = (microcode_header_t *)(buf + offset);
-	total_size = get_totalsize(mc_header);
-
-	if (offset + total_size > size) {
-		printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
-		return -EINVAL;
-	}
-
-	*mc = vmalloc(total_size);
-	if (!*mc) {
-		printk(KERN_ERR "microcode: error! Can not allocate memory\n");
-		return -ENOMEM;
-	}
-	memcpy(*mc, buf + offset, total_size);
-	return offset + total_size;
-}
-
-/* fake device for request_firmware */
-static struct platform_device *microcode_pdev;
-
-static int cpu_request_microcode(int cpu)
-{
-	char name[30];
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	const struct firmware *firmware;
-	const u8 *buf;
-	unsigned long size;
-	long offset = 0;
-	int error;
-	void *mc;
-
-	/* We should bind the task to the CPU */
-	BUG_ON(cpu != raw_smp_processor_id());
-	sprintf(name,"intel-ucode/%02x-%02x-%02x",
-		c->x86, c->x86_model, c->x86_mask);
-	error = request_firmware(&firmware, name, &microcode_pdev->dev);
-	if (error) {
-		pr_debug("microcode: data file %s load failed\n", name);
-		return error;
-	}
-	buf = firmware->data;
-	size = firmware->size;
-	while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset))
-			> 0) {
-		error = microcode_sanity_check(mc);
-		if (error)
-			break;
-		error = get_maching_microcode(mc, cpu);
-		if (error < 0)
-			break;
-		/*
-		 * It's possible the data file has multiple matching ucode,
-		 * lets keep searching till the latest version
-		 */
-		if (error == 1) {
-			apply_microcode(cpu);
-			error = 0;
-		}
-		vfree(mc);
-	}
-	if (offset > 0)
-		vfree(mc);
-	if (offset < 0)
-		error = offset;
-	release_firmware(firmware);
-
-	return error;
-}
-
-static int apply_microcode_check_cpu(int cpu)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-	cpumask_t old;
-	unsigned int val[2];
-	int err = 0;
-
-	/* Check if the microcode is available */
-	if (!uci->mc)
-		return 0;
-
-	old = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
-	/* Check if the microcode we have in memory matches the CPU */
-	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
-	    cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001))
-		err = -EINVAL;
-
-	if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) {
-		/* get processor flags from MSR 0x17 */
-		rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
-		if (uci->pf != (1 << ((val[1] >> 18) & 7)))
-			err = -EINVAL;
-	}
-
-	if (!err) {
-		wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-		/* see notes above for revision 1.07.  Apparent chip bug */
-		sync_core();
-		/* get the current revision from MSR 0x8B */
-		rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-		if (uci->rev != val[1])
-			err = -EINVAL;
-	}
-
-	if (!err)
-		apply_microcode(cpu);
-	else
-		printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:"
-			" sig=0x%x, pf=0x%x, rev=0x%x\n",
-			cpu, uci->sig, uci->pf, uci->rev);
-
-	set_cpus_allowed_ptr(current, &old);
-	return err;
-}
-
-static void microcode_init_cpu(int cpu, int resume)
-{
-	cpumask_t old;
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-	old = current->cpus_allowed;
-
-	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-	mutex_lock(&microcode_mutex);
-	collect_cpu_info(cpu);
-	if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
-		cpu_request_microcode(cpu);
-	mutex_unlock(&microcode_mutex);
-	set_cpus_allowed_ptr(current, &old);
-}
-
-static void microcode_fini_cpu(int cpu)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-	mutex_lock(&microcode_mutex);
-	uci->valid = 0;
-	vfree(uci->mc);
-	uci->mc = NULL;
-	mutex_unlock(&microcode_mutex);
-}
-
-static ssize_t reload_store(struct sys_device *dev,
-			    struct sysdev_attribute *attr,
-			    const char *buf, size_t sz)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-	char *end;
-	unsigned long val = simple_strtoul(buf, &end, 0);
-	int err = 0;
-	int cpu = dev->id;
-
-	if (end == buf)
-		return -EINVAL;
-	if (val == 1) {
-		cpumask_t old = current->cpus_allowed;
-
-		get_online_cpus();
-		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
-		mutex_lock(&microcode_mutex);
-		if (uci->valid)
-			err = cpu_request_microcode(cpu);
-		mutex_unlock(&microcode_mutex);
-		put_online_cpus();
-		set_cpus_allowed_ptr(current, &old);
-	}
-	if (err)
-		return err;
-	return sz;
-}
-
-static ssize_t version_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
-	return sprintf(buf, "0x%x\n", uci->rev);
-}
-
-static ssize_t pf_show(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
-{
-	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
-	return sprintf(buf, "0x%x\n", uci->pf);
-}
-
-static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
-static SYSDEV_ATTR(version, 0400, version_show, NULL);
-static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
-
-static struct attribute *mc_default_attrs[] = {
-	&attr_reload.attr,
-	&attr_version.attr,
-	&attr_processor_flags.attr,
-	NULL
-};
-
-static struct attribute_group mc_attr_group = {
-	.attrs = mc_default_attrs,
-	.name = "microcode",
-};
-
-static int __mc_sysdev_add(struct sys_device *sys_dev, int resume)
-{
-	int err, cpu = sys_dev->id;
-	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	pr_debug("microcode: CPU%d added\n", cpu);
-	memset(uci, 0, sizeof(*uci));
-
-	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
-	if (err)
-		return err;
-
-	microcode_init_cpu(cpu, resume);
-
-	return 0;
-}
-
-static int mc_sysdev_add(struct sys_device *sys_dev)
-{
-	return __mc_sysdev_add(sys_dev, 0);
-}
-
-static int mc_sysdev_remove(struct sys_device *sys_dev)
-{
-	int cpu = sys_dev->id;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	pr_debug("microcode: CPU%d removed\n", cpu);
-	microcode_fini_cpu(cpu);
-	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
-	return 0;
-}
-
-static int mc_sysdev_resume(struct sys_device *dev)
-{
-	int cpu = dev->id;
-
-	if (!cpu_online(cpu))
-		return 0;
-	pr_debug("microcode: CPU%d resumed\n", cpu);
-	/* only CPU 0 will apply ucode here */
-	apply_microcode(0);
-	return 0;
-}
-
-static struct sysdev_driver mc_sysdev_driver = {
-	.add = mc_sysdev_add,
-	.remove = mc_sysdev_remove,
-	.resume = mc_sysdev_resume,
-};
-
-static __cpuinit int
-mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-	struct sys_device *sys_dev;
-
-	sys_dev = get_cpu_sysdev(cpu);
-	switch (action) {
-	case CPU_UP_CANCELED_FROZEN:
-		/* The CPU refused to come up during a system resume */
-		microcode_fini_cpu(cpu);
-		break;
-	case CPU_ONLINE:
-	case CPU_DOWN_FAILED:
-		mc_sysdev_add(sys_dev);
-		break;
-	case CPU_ONLINE_FROZEN:
-		/* System-wide resume is in progress, try to apply microcode */
-		if (apply_microcode_check_cpu(cpu)) {
-			/* The application of microcode failed */
-			microcode_fini_cpu(cpu);
-			__mc_sysdev_add(sys_dev, 1);
-			break;
-		}
-	case CPU_DOWN_FAILED_FROZEN:
-		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
-			printk(KERN_ERR "microcode: Failed to create the sysfs "
-				"group for CPU%d\n", cpu);
-		break;
-	case CPU_DOWN_PREPARE:
-		mc_sysdev_remove(sys_dev);
-		break;
-	case CPU_DOWN_PREPARE_FROZEN:
-		/* Suspend is in progress, only remove the interface */
-		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __refdata mc_cpu_notifier = {
-	.notifier_call = mc_cpu_callback,
-};
-
-static int __init microcode_init (void)
-{
-	int error;
-
-	printk(KERN_INFO
-		"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
-
-	error = microcode_dev_init();
-	if (error)
-		return error;
-	microcode_pdev = platform_device_register_simple("microcode", -1,
-							 NULL, 0);
-	if (IS_ERR(microcode_pdev)) {
-		microcode_dev_exit();
-		return PTR_ERR(microcode_pdev);
-	}
-
-	get_online_cpus();
-	error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
-	put_online_cpus();
-	if (error) {
-		microcode_dev_exit();
-		platform_device_unregister(microcode_pdev);
-		return error;
-	}
-
-	register_hotcpu_notifier(&mc_cpu_notifier);
-	return 0;
-}
-
-static void __exit microcode_exit (void)
-{
-	microcode_dev_exit();
-
-	unregister_hotcpu_notifier(&mc_cpu_notifier);
-
-	get_online_cpus();
-	sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
-	put_online_cpus();
-
-	platform_device_unregister(microcode_pdev);
-}
-
-module_init(microcode_init)
-module_exit(microcode_exit)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
new file mode 100644
index 0000000..7a1f8ee
--- /dev/null
+++ b/arch/x86/kernel/microcode_amd.c
@@ -0,0 +1,435 @@
+/*
+ *  AMD CPU Microcode Update Driver for Linux
+ *  Copyright (C) 2008 Advanced Micro Devices Inc.
+ *
+ *  Author: Peter Oruba <peter.oruba@amd.com>
+ *
+ *  Based on work by:
+ *  Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ *
+ *  This driver allows to upgrade microcode on AMD
+ *  family 0x10 and 0x11 processors.
+ *
+ *  Licensed unter the terms of the GNU General Public
+ *  License version 2. See file COPYING for details.
+*/
+
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("AMD Microcode Update Driver");
+MODULE_AUTHOR("Peter Oruba <peter.oruba@amd.com>");
+MODULE_LICENSE("GPL v2");
+
+#define UCODE_MAGIC                0x00414d44
+#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
+#define UCODE_UCODE_TYPE           0x00000001
+
+struct equiv_cpu_entry {
+	unsigned int installed_cpu;
+	unsigned int fixed_errata_mask;
+	unsigned int fixed_errata_compare;
+	unsigned int equiv_cpu;
+};
+
+struct microcode_header_amd {
+	unsigned int  data_code;
+	unsigned int  patch_id;
+	unsigned char mc_patch_data_id[2];
+	unsigned char mc_patch_data_len;
+	unsigned char init_flag;
+	unsigned int  mc_patch_data_checksum;
+	unsigned int  nb_dev_id;
+	unsigned int  sb_dev_id;
+	unsigned char processor_rev_id[2];
+	unsigned char nb_rev_id;
+	unsigned char sb_rev_id;
+	unsigned char bios_api_rev;
+	unsigned char reserved1[3];
+	unsigned int  match_reg[8];
+};
+
+struct microcode_amd {
+	struct microcode_header_amd hdr;
+	unsigned int mpb[0];
+};
+
+#define UCODE_MAX_SIZE          (2048)
+#define DEFAULT_UCODE_DATASIZE	(896)
+#define MC_HEADER_SIZE		(sizeof(struct microcode_header_amd))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define DWSIZE			(sizeof(u32))
+/* For now we support a fixed ucode total size only */
+#define get_totalsize(mc) \
+	((((struct microcode_amd *)mc)->hdr.mc_patch_data_len * 28) \
+	 + MC_HEADER_SIZE)
+
+/* serialize access to the physical write */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static struct equiv_cpu_entry *equiv_cpu_table;
+
+static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
+{
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	memset(csig, 0, sizeof(*csig));
+
+	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+		printk(KERN_ERR "microcode: CPU%d not a capable AMD processor\n",
+		       cpu);
+		return -1;
+	}
+
+	asm volatile("movl %1, %%ecx; rdmsr"
+		     : "=a" (csig->rev)
+		     : "i" (0x0000008B) : "ecx");
+
+	printk(KERN_INFO "microcode: collect_cpu_info_amd : patch_id=0x%x\n",
+		csig->rev);
+
+	return 0;
+}
+
+static int get_matching_microcode(int cpu, void *mc, int rev)
+{
+	struct microcode_header_amd *mc_header = mc;
+	struct pci_dev *nb_pci_dev, *sb_pci_dev;
+	unsigned int current_cpu_id;
+	unsigned int equiv_cpu_id = 0x00;
+	unsigned int i = 0;
+
+	BUG_ON(equiv_cpu_table == NULL);
+	current_cpu_id = cpuid_eax(0x00000001);
+
+	while (equiv_cpu_table[i].installed_cpu != 0) {
+		if (current_cpu_id == equiv_cpu_table[i].installed_cpu) {
+			equiv_cpu_id = equiv_cpu_table[i].equiv_cpu;
+			break;
+		}
+		i++;
+	}
+
+	if (!equiv_cpu_id) {
+		printk(KERN_ERR "microcode: CPU%d cpu_id "
+		       "not found in equivalent cpu table \n", cpu);
+		return 0;
+	}
+
+	if ((mc_header->processor_rev_id[0]) != (equiv_cpu_id & 0xff)) {
+		printk(KERN_ERR
+			"microcode: CPU%d patch does not match "
+			"(patch is %x, cpu extended is %x) \n",
+			cpu, mc_header->processor_rev_id[0],
+			(equiv_cpu_id & 0xff));
+		return 0;
+	}
+
+	if ((mc_header->processor_rev_id[1]) != ((equiv_cpu_id >> 16) & 0xff)) {
+		printk(KERN_ERR "microcode: CPU%d patch does not match "
+			"(patch is %x, cpu base id is %x) \n",
+			cpu, mc_header->processor_rev_id[1],
+			((equiv_cpu_id >> 16) & 0xff));
+
+		return 0;
+	}
+
+	/* ucode may be northbridge specific */
+	if (mc_header->nb_dev_id) {
+		nb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					    (mc_header->nb_dev_id & 0xff),
+					    NULL);
+		if ((!nb_pci_dev) ||
+		    (mc_header->nb_rev_id != nb_pci_dev->revision)) {
+			printk(KERN_ERR "microcode: CPU%d NB mismatch \n", cpu);
+			pci_dev_put(nb_pci_dev);
+			return 0;
+		}
+		pci_dev_put(nb_pci_dev);
+	}
+
+	/* ucode may be southbridge specific */
+	if (mc_header->sb_dev_id) {
+		sb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					    (mc_header->sb_dev_id & 0xff),
+					    NULL);
+		if ((!sb_pci_dev) ||
+		    (mc_header->sb_rev_id != sb_pci_dev->revision)) {
+			printk(KERN_ERR "microcode: CPU%d SB mismatch \n", cpu);
+			pci_dev_put(sb_pci_dev);
+			return 0;
+		}
+		pci_dev_put(sb_pci_dev);
+	}
+
+	if (mc_header->patch_id <= rev)
+		return 0;
+
+	return 1;
+}
+
+static void apply_microcode_amd(int cpu)
+{
+	unsigned long flags;
+	unsigned int eax, edx;
+	unsigned int rev;
+	int cpu_num = raw_smp_processor_id();
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+	struct microcode_amd *mc_amd = uci->mc;
+	unsigned long addr;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu_num != cpu);
+
+	if (mc_amd == NULL)
+		return;
+
+	spin_lock_irqsave(&microcode_update_lock, flags);
+
+	addr = (unsigned long)&mc_amd->hdr.data_code;
+	edx = (unsigned int)(((unsigned long)upper_32_bits(addr)));
+	eax = (unsigned int)(((unsigned long)lower_32_bits(addr)));
+
+	asm volatile("movl %0, %%ecx; wrmsr" :
+		     : "i" (0xc0010020), "a" (eax), "d" (edx) : "ecx");
+
+	/* get patch id after patching */
+	asm volatile("movl %1, %%ecx; rdmsr"
+		     : "=a" (rev)
+		     : "i" (0x0000008B) : "ecx");
+
+	spin_unlock_irqrestore(&microcode_update_lock, flags);
+
+	/* check current patch id and patch's id for match */
+	if (rev != mc_amd->hdr.patch_id) {
+		printk(KERN_ERR "microcode: CPU%d update from revision "
+		       "0x%x to 0x%x failed\n", cpu_num,
+		       mc_amd->hdr.patch_id, rev);
+		return;
+	}
+
+	printk(KERN_INFO "microcode: CPU%d updated from revision "
+	       "0x%x to 0x%x \n",
+	       cpu_num, uci->cpu_sig.rev, mc_amd->hdr.patch_id);
+
+	uci->cpu_sig.rev = rev;
+}
+
+static void * get_next_ucode(u8 *buf, unsigned int size,
+			int (*get_ucode_data)(void *, const void *, size_t),
+			unsigned int *mc_size)
+{
+	unsigned int total_size;
+#define UCODE_CONTAINER_SECTION_HDR	8
+	u8 section_hdr[UCODE_CONTAINER_SECTION_HDR];
+	void *mc;
+
+	if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR))
+		return NULL;
+
+	if (section_hdr[0] != UCODE_UCODE_TYPE) {
+		printk(KERN_ERR "microcode: error! "
+		       "Wrong microcode payload type field\n");
+		return NULL;
+	}
+
+	total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
+
+	printk(KERN_INFO "microcode: size %u, total_size %u\n",
+		size, total_size);
+
+	if (total_size > size || total_size > UCODE_MAX_SIZE) {
+		printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+		return NULL;
+	}
+
+	mc = vmalloc(UCODE_MAX_SIZE);
+	if (mc) {
+		memset(mc, 0, UCODE_MAX_SIZE);
+		if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size)) {
+			vfree(mc);
+			mc = NULL;
+		} else
+			*mc_size = total_size + UCODE_CONTAINER_SECTION_HDR;
+	}
+#undef UCODE_CONTAINER_SECTION_HDR
+	return mc;
+}
+
+
+static int install_equiv_cpu_table(u8 *buf,
+		int (*get_ucode_data)(void *, const void *, size_t))
+{
+#define UCODE_CONTAINER_HEADER_SIZE	12
+	u8 *container_hdr[UCODE_CONTAINER_HEADER_SIZE];
+	unsigned int *buf_pos = (unsigned int *)container_hdr;
+	unsigned long size;
+
+	if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE))
+		return 0;
+
+	size = buf_pos[2];
+
+	if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
+		printk(KERN_ERR "microcode: error! "
+		       "Wrong microcode equivalnet cpu table\n");
+		return 0;
+	}
+
+	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+	if (!equiv_cpu_table) {
+		printk(KERN_ERR "microcode: error, can't allocate memory for equiv CPU table\n");
+		return 0;
+	}
+
+	buf += UCODE_CONTAINER_HEADER_SIZE;
+	if (get_ucode_data(equiv_cpu_table, buf, size)) {
+		vfree(equiv_cpu_table);
+		return 0;
+	}
+
+	return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */
+#undef UCODE_CONTAINER_HEADER_SIZE
+}
+
+static void free_equiv_cpu_table(void)
+{
+	if (equiv_cpu_table) {
+		vfree(equiv_cpu_table);
+		equiv_cpu_table = NULL;
+	}
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+		int (*get_ucode_data)(void *, const void *, size_t))
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+	int new_rev = uci->cpu_sig.rev;
+	unsigned int leftover;
+	unsigned long offset;
+
+	offset = install_equiv_cpu_table(ucode_ptr, get_ucode_data);
+	if (!offset) {
+		printk(KERN_ERR "microcode: installing equivalent cpu table failed\n");
+		return -EINVAL;
+	}
+
+	ucode_ptr += offset;
+	leftover = size - offset;
+
+	while (leftover) {
+		unsigned int uninitialized_var(mc_size);
+		struct microcode_header_amd *mc_header;
+
+		mc = get_next_ucode(ucode_ptr, leftover, get_ucode_data, &mc_size);
+		if (!mc)
+			break;
+
+		mc_header = (struct microcode_header_amd *)mc;
+		if (get_matching_microcode(cpu, mc, new_rev)) {
+			if (new_mc)
+				vfree(new_mc);
+			new_rev = mc_header->patch_id;
+			new_mc  = mc;
+		} else 
+			vfree(mc);
+
+		ucode_ptr += mc_size;
+		leftover  -= mc_size;
+	}
+
+	if (new_mc) {
+		if (!leftover) {
+			if (uci->mc)
+				vfree(uci->mc);
+			uci->mc = new_mc;
+			pr_debug("microcode: CPU%d found a matching microcode update with"
+				" version 0x%x (current=0x%x)\n",
+				cpu, new_rev, uci->cpu_sig.rev);
+		} else
+			vfree(new_mc);
+	}
+
+	free_equiv_cpu_table();
+
+	return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+	memcpy(to, from, n);
+	return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+	const char *fw_name = "amd-ucode/microcode_amd.bin";
+	const struct firmware *firmware;
+	int ret;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu != raw_smp_processor_id());
+
+	ret = request_firmware(&firmware, fw_name, device);
+	if (ret) {
+		printk(KERN_ERR "microcode: ucode data file %s load failed\n", fw_name);
+		return ret;
+	}
+
+	ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+			&get_ucode_fw);
+
+	release_firmware(firmware);
+
+	return ret;
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+	printk(KERN_WARNING "microcode: AMD microcode update via /dev/cpu/microcode"
+			"is not supported\n");
+	return -1;
+}
+
+static void microcode_fini_cpu_amd(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	vfree(uci->mc);
+	uci->mc = NULL;
+}
+
+static struct microcode_ops microcode_amd_ops = {
+	.request_microcode_user           = request_microcode_user,
+	.request_microcode_fw             = request_microcode_fw,
+	.collect_cpu_info                 = collect_cpu_info_amd,
+	.apply_microcode                  = apply_microcode_amd,
+	.microcode_fini_cpu               = microcode_fini_cpu_amd,
+};
+
+struct microcode_ops * __init init_amd_microcode(void)
+{
+	return &microcode_amd_ops;
+}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
new file mode 100644
index 0000000..936d8d5
--- /dev/null
+++ b/arch/x86/kernel/microcode_core.c
@@ -0,0 +1,508 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ *		      2006	Shaohua Li <shaohua.li@intel.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	1.0	16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Initial release.
+ *	1.01	18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added read() support + cleanups.
+ *	1.02	21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added 'device trimming' support. open(O_WRONLY) zeroes
+ *		and frees the saved copy of applied microcode.
+ *	1.03	29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Made to use devfs (/dev/cpu/microcode) + cleanups.
+ *	1.04	06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Added misc device support (now uses both devfs and misc).
+ *		Added MICROCODE_IOCFREE ioctl to clear memory.
+ *	1.05	09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Messages for error cases (non Intel & no suitable microcode).
+ *	1.06	03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->release(). Removed exclusive open and status bitmap.
+ *		Added microcode_rwsem to serialize read()/write()/ioctl().
+ *		Removed global kernel lock usage.
+ *	1.07	07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Write 0 to 0x8B msr and then cpuid before reading revision,
+ *		so that it works even if there were no update done by the
+ *		BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ *		to be 0 on my machine which is why it worked even when I
+ *		disabled update by the BIOS)
+ *		Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ *	1.08	11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ *			     Tigran Aivazian <tigran@veritas.com>
+ *		Intel Pentium 4 processor support and bugfixes.
+ *	1.09	30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ *		Bugfix for HT (Hyper-Threading) enabled processors
+ *		whereby processor resources are shared by all logical processors
+ *		in a single CPU package.
+ *	1.10	28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ *		Tigran Aivazian <tigran@veritas.com>,
+ *		Serialize updates as required on HT processors due to
+ *		speculative nature of implementation.
+ *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ *		Fix the panic when writing zero-length microcode chunk.
+ *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
+ *		Jun Nakajima <jun.nakajima@intel.com>
+ *		Support for the microcode updates in the new format.
+ *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ *		because we no longer hold a copy of applied microcode
+ *		in kernel memory.
+ *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ *		Fix sigmatch() macro to handle old CPUs with pf == 0.
+ *		Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+#define MICROCODE_VERSION 	"2.00"
+
+struct microcode_ops *microcode_ops;
+
+/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+static DEFINE_MUTEX(microcode_mutex);
+
+struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
+EXPORT_SYMBOL_GPL(ucode_cpu_info);
+
+#ifdef CONFIG_MICROCODE_OLD_INTERFACE
+static int do_microcode_update(const void __user *buf, size_t size)
+{
+	cpumask_t old;
+	int error = 0;
+	int cpu;
+
+	old = current->cpus_allowed;
+
+	for_each_online_cpu(cpu) {
+		struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+		if (!uci->valid)
+			continue;
+
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+		error = microcode_ops->request_microcode_user(cpu, buf, size);
+		if (error < 0)
+			goto out;
+		if (!error)
+			microcode_ops->apply_microcode(cpu);
+	}
+out:
+	set_cpus_allowed_ptr(current, &old);
+	return error;
+}
+
+static int microcode_open(struct inode *unused1, struct file *unused2)
+{
+	cycle_kernel_lock();
+	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+}
+
+static ssize_t microcode_write(struct file *file, const char __user *buf,
+			       size_t len, loff_t *ppos)
+{
+	ssize_t ret;
+
+	if ((len >> PAGE_SHIFT) > num_physpages) {
+		printk(KERN_ERR "microcode: too much data (max %ld pages)\n",
+		       num_physpages);
+		return -EINVAL;
+	}
+
+	get_online_cpus();
+	mutex_lock(&microcode_mutex);
+
+	ret = do_microcode_update(buf, len);
+	if (!ret)
+		ret = (ssize_t)len;
+
+	mutex_unlock(&microcode_mutex);
+	put_online_cpus();
+
+	return ret;
+}
+
+static const struct file_operations microcode_fops = {
+	.owner		= THIS_MODULE,
+	.write		= microcode_write,
+	.open		= microcode_open,
+};
+
+static struct miscdevice microcode_dev = {
+	.minor		= MICROCODE_MINOR,
+	.name		= "microcode",
+	.fops		= &microcode_fops,
+};
+
+static int __init microcode_dev_init(void)
+{
+	int error;
+
+	error = misc_register(&microcode_dev);
+	if (error) {
+		printk(KERN_ERR
+			"microcode: can't misc_register on minor=%d\n",
+			MICROCODE_MINOR);
+		return error;
+	}
+
+	return 0;
+}
+
+static void microcode_dev_exit(void)
+{
+	misc_deregister(&microcode_dev);
+}
+
+MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
+#else
+#define microcode_dev_init() 0
+#define microcode_dev_exit() do { } while (0)
+#endif
+
+/* fake device for request_firmware */
+struct platform_device *microcode_pdev;
+
+static ssize_t reload_store(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf, size_t sz)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+	char *end;
+	unsigned long val = simple_strtoul(buf, &end, 0);
+	int err = 0;
+	int cpu = dev->id;
+
+	if (end == buf)
+		return -EINVAL;
+	if (val == 1) {
+		cpumask_t old = current->cpus_allowed;
+
+		get_online_cpus();
+		if (cpu_online(cpu)) {
+			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+			mutex_lock(&microcode_mutex);
+			if (uci->valid) {
+				err = microcode_ops->request_microcode_fw(cpu,
+						&microcode_pdev->dev);
+				if (!err)
+					microcode_ops->apply_microcode(cpu);
+			}
+			mutex_unlock(&microcode_mutex);
+			set_cpus_allowed_ptr(current, &old);
+		}
+		put_online_cpus();
+	}
+	if (err)
+		return err;
+	return sz;
+}
+
+static ssize_t version_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+	return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
+}
+
+static ssize_t pf_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+	return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
+}
+
+static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
+static SYSDEV_ATTR(version, 0400, version_show, NULL);
+static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
+
+static struct attribute *mc_default_attrs[] = {
+	&attr_reload.attr,
+	&attr_version.attr,
+	&attr_processor_flags.attr,
+	NULL
+};
+
+static struct attribute_group mc_attr_group = {
+	.attrs = mc_default_attrs,
+	.name = "microcode",
+};
+
+static void microcode_fini_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	mutex_lock(&microcode_mutex);
+	microcode_ops->microcode_fini_cpu(cpu);
+	uci->valid = 0;
+	mutex_unlock(&microcode_mutex);
+}
+
+static void collect_cpu_info(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	memset(uci, 0, sizeof(*uci));
+	if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig))
+		uci->valid = 1;
+}
+
+static int microcode_resume_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	struct cpu_signature nsig;
+
+	pr_debug("microcode: CPU%d resumed\n", cpu);
+
+	if (!uci->mc)
+		return 1;
+
+	/*
+	 * Let's verify that the 'cached' ucode does belong
+	 * to this cpu (a bit of paranoia):
+	 */
+	if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
+		microcode_fini_cpu(cpu);
+		return -1;
+	}
+
+	if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
+		microcode_fini_cpu(cpu);
+		/* Should we look for a new ucode here? */
+		return 1;
+	}
+
+	return 0;
+}
+
+void microcode_update_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	int err = 0;
+
+	/*
+	 * Check if the system resume is in progress (uci->valid != NULL),
+	 * otherwise just request a firmware:
+	 */
+	if (uci->valid) {
+		err = microcode_resume_cpu(cpu);
+	} else {	
+		collect_cpu_info(cpu);
+		if (uci->valid && system_state == SYSTEM_RUNNING)
+			err = microcode_ops->request_microcode_fw(cpu,
+					&microcode_pdev->dev);
+	}
+	if (!err)
+		microcode_ops->apply_microcode(cpu);
+}
+
+static void microcode_init_cpu(int cpu)
+{
+	cpumask_t old = current->cpus_allowed;
+
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+	/* We should bind the task to the CPU */
+	BUG_ON(raw_smp_processor_id() != cpu);
+
+	mutex_lock(&microcode_mutex);
+	microcode_update_cpu(cpu);
+	mutex_unlock(&microcode_mutex);
+
+	set_cpus_allowed_ptr(current, &old);
+}
+
+static int mc_sysdev_add(struct sys_device *sys_dev)
+{
+	int err, cpu = sys_dev->id;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	pr_debug("microcode: CPU%d added\n", cpu);
+	memset(uci, 0, sizeof(*uci));
+
+	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
+	if (err)
+		return err;
+
+	microcode_init_cpu(cpu);
+	return 0;
+}
+
+static int mc_sysdev_remove(struct sys_device *sys_dev)
+{
+	int cpu = sys_dev->id;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	pr_debug("microcode: CPU%d removed\n", cpu);
+	microcode_fini_cpu(cpu);
+	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+	return 0;
+}
+
+static int mc_sysdev_resume(struct sys_device *dev)
+{
+	int cpu = dev->id;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	/* only CPU 0 will apply ucode here */
+	microcode_update_cpu(0);
+	return 0;
+}
+
+static struct sysdev_driver mc_sysdev_driver = {
+	.add = mc_sysdev_add,
+	.remove = mc_sysdev_remove,
+	.resume = mc_sysdev_resume,
+};
+
+static __cpuinit int
+mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct sys_device *sys_dev;
+
+	sys_dev = get_cpu_sysdev(cpu);
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		microcode_init_cpu(cpu);
+	case CPU_DOWN_FAILED:
+	case CPU_DOWN_FAILED_FROZEN:
+		pr_debug("microcode: CPU%d added\n", cpu);
+		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
+			printk(KERN_ERR "microcode: Failed to create the sysfs "
+				"group for CPU%d\n", cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
+		/* Suspend is in progress, only remove the interface */
+		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+		pr_debug("microcode: CPU%d removed\n", cpu);
+		break;
+	case CPU_DEAD:
+	case CPU_UP_CANCELED_FROZEN:
+		/* The CPU refused to come up during a system resume */
+		microcode_fini_cpu(cpu);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __refdata mc_cpu_notifier = {
+	.notifier_call = mc_cpu_callback,
+};
+
+static int __init microcode_init(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	int error;
+
+	if (c->x86_vendor == X86_VENDOR_INTEL)
+		microcode_ops = init_intel_microcode();
+	else if (c->x86_vendor == X86_VENDOR_AMD)
+		microcode_ops = init_amd_microcode();
+
+	if (!microcode_ops) {
+		printk(KERN_ERR "microcode: no support for this CPU vendor\n");
+		return -ENODEV;
+	}
+
+	error = microcode_dev_init();
+	if (error)
+		return error;
+	microcode_pdev = platform_device_register_simple("microcode", -1,
+							 NULL, 0);
+	if (IS_ERR(microcode_pdev)) {
+		microcode_dev_exit();
+		return PTR_ERR(microcode_pdev);
+	}
+
+	get_online_cpus();
+	error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+	put_online_cpus();
+	if (error) {
+		microcode_dev_exit();
+		platform_device_unregister(microcode_pdev);
+		return error;
+	}
+
+	register_hotcpu_notifier(&mc_cpu_notifier);
+
+	printk(KERN_INFO
+	       "Microcode Update Driver: v" MICROCODE_VERSION
+	       " <tigran@aivazian.fsnet.co.uk>"
+	       " <peter.oruba@amd.com>\n");
+
+	return 0;
+}
+
+static void __exit microcode_exit(void)
+{
+	microcode_dev_exit();
+
+	unregister_hotcpu_notifier(&mc_cpu_notifier);
+
+	get_online_cpus();
+	sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+	put_online_cpus();
+
+	platform_device_unregister(microcode_pdev);
+
+	microcode_ops = NULL;
+
+	printk(KERN_INFO
+	       "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
+}
+
+module_init(microcode_init);
+module_exit(microcode_exit);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
new file mode 100644
index 0000000..622dc4a
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel.c
@@ -0,0 +1,480 @@
+/*
+ *	Intel CPU Microcode Update Driver for Linux
+ *
+ *	Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ *		      2006	Shaohua Li <shaohua.li@intel.com>
+ *
+ *	This driver allows to upgrade microcode on Intel processors
+ *	belonging to IA-32 family - PentiumPro, Pentium II,
+ *	Pentium III, Xeon, Pentium 4, etc.
+ *
+ *	Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ *	Software Developer's Manual
+ *	Order Number 253668 or free download from:
+ *
+ *	http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ *	For more information, go to http://www.urbanmyth.org/microcode
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	1.0	16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Initial release.
+ *	1.01	18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added read() support + cleanups.
+ *	1.02	21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Added 'device trimming' support. open(O_WRONLY) zeroes
+ *		and frees the saved copy of applied microcode.
+ *	1.03	29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ *		Made to use devfs (/dev/cpu/microcode) + cleanups.
+ *	1.04	06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Added misc device support (now uses both devfs and misc).
+ *		Added MICROCODE_IOCFREE ioctl to clear memory.
+ *	1.05	09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ *		Messages for error cases (non Intel & no suitable microcode).
+ *	1.06	03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->release(). Removed exclusive open and status bitmap.
+ *		Added microcode_rwsem to serialize read()/write()/ioctl().
+ *		Removed global kernel lock usage.
+ *	1.07	07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ *		Write 0 to 0x8B msr and then cpuid before reading revision,
+ *		so that it works even if there were no update done by the
+ *		BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ *		to be 0 on my machine which is why it worked even when I
+ *		disabled update by the BIOS)
+ *		Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ *	1.08	11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ *			     Tigran Aivazian <tigran@veritas.com>
+ *		Intel Pentium 4 processor support and bugfixes.
+ *	1.09	30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ *		Bugfix for HT (Hyper-Threading) enabled processors
+ *		whereby processor resources are shared by all logical processors
+ *		in a single CPU package.
+ *	1.10	28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ *		Tigran Aivazian <tigran@veritas.com>,
+ *		Serialize updates as required on HT processors due to
+ *		speculative nature of implementation.
+ *	1.11	22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ *		Fix the panic when writing zero-length microcode chunk.
+ *	1.12	29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
+ *		Jun Nakajima <jun.nakajima@intel.com>
+ *		Support for the microcode updates in the new format.
+ *	1.13	10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ *		because we no longer hold a copy of applied microcode
+ *		in kernel memory.
+ *	1.14	25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ *		Fix sigmatch() macro to handle old CPUs with pf == 0.
+ *		Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+struct microcode_header_intel {
+	unsigned int            hdrver;
+	unsigned int            rev;
+	unsigned int            date;
+	unsigned int            sig;
+	unsigned int            cksum;
+	unsigned int            ldrver;
+	unsigned int            pf;
+	unsigned int            datasize;
+	unsigned int            totalsize;
+	unsigned int            reserved[3];
+};
+
+struct microcode_intel {
+	struct microcode_header_intel hdr;
+	unsigned int            bits[0];
+};
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+	unsigned int            sig;
+	unsigned int            pf;
+	unsigned int            cksum;
+};
+
+struct extended_sigtable {
+	unsigned int            count;
+	unsigned int            cksum;
+	unsigned int            reserved[3];
+	struct extended_signature sigs[0];
+};
+
+#define DEFAULT_UCODE_DATASIZE 	(2000)
+#define MC_HEADER_SIZE		(sizeof(struct microcode_header_intel))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define EXT_HEADER_SIZE		(sizeof(struct extended_sigtable))
+#define EXT_SIGNATURE_SIZE	(sizeof(struct extended_signature))
+#define DWSIZE			(sizeof(u32))
+#define get_totalsize(mc) \
+	(((struct microcode_intel *)mc)->hdr.totalsize ? \
+	 ((struct microcode_intel *)mc)->hdr.totalsize : \
+	 DEFAULT_UCODE_TOTALSIZE)
+
+#define get_datasize(mc) \
+	(((struct microcode_intel *)mc)->hdr.datasize ? \
+	 ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+	(((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+/* serialize access to the physical write to MSR 0x79 */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
+{
+	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+	unsigned int val[2];
+
+	memset(csig, 0, sizeof(*csig));
+
+	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+	    cpu_has(c, X86_FEATURE_IA64)) {
+		printk(KERN_ERR "microcode: CPU%d not a capable Intel "
+			"processor\n", cpu_num);
+		return -1;
+	}
+
+	csig->sig = cpuid_eax(0x00000001);
+
+	if ((c->x86_model >= 5) || (c->x86 > 6)) {
+		/* get processor flags from MSR 0x17 */
+		rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+		csig->pf = 1 << ((val[1] >> 18) & 7);
+	}
+
+	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+	/* see notes above for revision 1.07.  Apparent chip bug */
+	sync_core();
+	/* get the current revision from MSR 0x8B */
+	rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
+			csig->sig, csig->pf, csig->rev);
+
+	return 0;
+}
+
+static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
+{
+	return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
+}
+
+static inline int 
+update_match_revision(struct microcode_header_intel *mc_header,	int rev)
+{
+	return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+static int microcode_sanity_check(void *mc)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header = NULL;
+	struct extended_signature *ext_sig;
+	unsigned long total_size, data_size, ext_table_size;
+	int sum, orig_sum, ext_sigcount = 0, i;
+
+	total_size = get_totalsize(mc_header);
+	data_size = get_datasize(mc_header);
+	if (data_size + MC_HEADER_SIZE > total_size) {
+		printk(KERN_ERR "microcode: error! "
+			"Bad data size in microcode data file\n");
+		return -EINVAL;
+	}
+
+	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+		printk(KERN_ERR "microcode: error! "
+			"Unknown microcode update format\n");
+		return -EINVAL;
+	}
+	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+	if (ext_table_size) {
+		if ((ext_table_size < EXT_HEADER_SIZE)
+		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+			printk(KERN_ERR "microcode: error! "
+				"Small exttable size in microcode data file\n");
+			return -EINVAL;
+		}
+		ext_header = mc + MC_HEADER_SIZE + data_size;
+		if (ext_table_size != exttable_size(ext_header)) {
+			printk(KERN_ERR "microcode: error! "
+				"Bad exttable size in microcode data file\n");
+			return -EFAULT;
+		}
+		ext_sigcount = ext_header->count;
+	}
+
+	/* check extended table checksum */
+	if (ext_table_size) {
+		int ext_table_sum = 0;
+		int *ext_tablep = (int *)ext_header;
+
+		i = ext_table_size / DWSIZE;
+		while (i--)
+			ext_table_sum += ext_tablep[i];
+		if (ext_table_sum) {
+			printk(KERN_WARNING "microcode: aborting, "
+				"bad extended signature table checksum\n");
+			return -EINVAL;
+		}
+	}
+
+	/* calculate the checksum */
+	orig_sum = 0;
+	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+	while (i--)
+		orig_sum += ((int *)mc)[i];
+	if (orig_sum) {
+		printk(KERN_ERR "microcode: aborting, bad checksum\n");
+		return -EINVAL;
+	}
+	if (!ext_table_size)
+		return 0;
+	/* check extended signature checksum */
+	for (i = 0; i < ext_sigcount; i++) {
+		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+			  EXT_SIGNATURE_SIZE * i;
+		sum = orig_sum
+			- (mc_header->sig + mc_header->pf + mc_header->cksum)
+			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+		if (sum) {
+			printk(KERN_ERR "microcode: aborting, bad checksum\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+static int
+get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
+{
+	struct microcode_header_intel *mc_header = mc;
+	struct extended_sigtable *ext_header;
+	unsigned long total_size = get_totalsize(mc_header);
+	int ext_sigcount, i;
+	struct extended_signature *ext_sig;
+
+	if (!update_match_revision(mc_header, rev))
+		return 0;
+
+	if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
+		return 1;
+
+	/* Look for ext. headers: */
+	if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+		return 0;
+
+	ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+	ext_sigcount = ext_header->count;
+	ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+	for (i = 0; i < ext_sigcount; i++) {
+		if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
+			return 1;
+		ext_sig++;
+	}
+	return 0;
+}
+
+static void apply_microcode(int cpu)
+{
+	unsigned long flags;
+	unsigned int val[2];
+	int cpu_num = raw_smp_processor_id();
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	struct microcode_intel *mc_intel = uci->mc;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu_num != cpu);
+
+	if (mc_intel == NULL)
+		return;
+
+	/* serialize access to the physical write to MSR 0x79 */
+	spin_lock_irqsave(&microcode_update_lock, flags);
+
+	/* write microcode via MSR 0x79 */
+	wrmsr(MSR_IA32_UCODE_WRITE,
+	      (unsigned long) mc_intel->bits,
+	      (unsigned long) mc_intel->bits >> 16 >> 16);
+	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+	/* see notes above for revision 1.07.  Apparent chip bug */
+	sync_core();
+
+	/* get the current revision from MSR 0x8B */
+	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+	spin_unlock_irqrestore(&microcode_update_lock, flags);
+	if (val[1] != mc_intel->hdr.rev) {
+		printk(KERN_ERR "microcode: CPU%d update from revision "
+			"0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]);
+		return;
+	}
+	printk(KERN_INFO "microcode: CPU%d updated from revision "
+	       "0x%x to 0x%x, date = %04x-%02x-%02x \n",
+		cpu_num, uci->cpu_sig.rev, val[1],
+		mc_intel->hdr.date & 0xffff,
+		mc_intel->hdr.date >> 24,
+		(mc_intel->hdr.date >> 16) & 0xff);
+	uci->cpu_sig.rev = val[1];
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+		int (*get_ucode_data)(void *, const void *, size_t))
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+	int new_rev = uci->cpu_sig.rev;
+	unsigned int leftover = size;
+
+	while (leftover) {
+		struct microcode_header_intel mc_header;
+		unsigned int mc_size;
+
+		if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
+			break;
+
+		mc_size = get_totalsize(&mc_header);
+		if (!mc_size || mc_size > leftover) {
+			printk(KERN_ERR "microcode: error!"
+					"Bad data in microcode data file\n");
+			break;
+		}
+
+		mc = vmalloc(mc_size);
+		if (!mc)
+			break;
+
+		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
+		    microcode_sanity_check(mc) < 0) {
+			vfree(mc);
+			break;
+		}
+
+		if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
+			if (new_mc)
+				vfree(new_mc);
+			new_rev = mc_header.rev;
+			new_mc  = mc;
+		} else
+			vfree(mc);
+
+		ucode_ptr += mc_size;
+		leftover  -= mc_size;
+	}
+
+	if (new_mc) {
+		if (!leftover) {
+			if (uci->mc)
+				vfree(uci->mc);
+			uci->mc = (struct microcode_intel *)new_mc;
+			pr_debug("microcode: CPU%d found a matching microcode update with"
+				 " version 0x%x (current=0x%x)\n",
+				cpu, new_rev, uci->cpu_sig.rev);
+		} else
+			vfree(new_mc);
+	}
+
+	return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+	memcpy(to, from, n);
+	return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+	char name[30];
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	const struct firmware *firmware;
+	int ret;
+
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu != raw_smp_processor_id());
+	sprintf(name, "intel-ucode/%02x-%02x-%02x",
+		c->x86, c->x86_model, c->x86_mask);
+	ret = request_firmware(&firmware, name, device);
+	if (ret) {
+		pr_debug("microcode: data file %s load failed\n", name);
+		return ret;
+	}
+
+	ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+			&get_ucode_fw);
+
+	release_firmware(firmware);
+
+	return ret;
+}
+
+static int get_ucode_user(void *to, const void *from, size_t n)
+{
+	return copy_from_user(to, from, n);
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+	/* We should bind the task to the CPU */
+	BUG_ON(cpu != raw_smp_processor_id());
+
+	return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+	vfree(uci->mc);
+	uci->mc = NULL;
+}
+
+struct microcode_ops microcode_intel_ops = {
+	.request_microcode_user		  = request_microcode_user,
+	.request_microcode_fw             = request_microcode_fw,
+	.collect_cpu_info                 = collect_cpu_info,
+	.apply_microcode                  = apply_microcode,
+	.microcode_fini_cpu               = microcode_fini_cpu,
+};
+
+struct microcode_ops * __init init_intel_microcode(void)
+{
+	return &microcode_intel_ops;
+}
+
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 42ec442..0a6d8c1 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -40,7 +40,9 @@
 	REGSET_GENERAL,
 	REGSET_FP,
 	REGSET_XFP,
+	REGSET_IOPERM64 = REGSET_XFP,
 	REGSET_TLS,
+	REGSET_IOPERM32,
 };
 
 /*
@@ -555,6 +557,29 @@
 	return 0;
 }
 
+/*
+ * These access the current or another (stopped) task's io permission
+ * bitmap for debugging or core dump.
+ */
+static int ioperm_active(struct task_struct *target,
+			 const struct user_regset *regset)
+{
+	return target->thread.io_bitmap_max / regset->size;
+}
+
+static int ioperm_get(struct task_struct *target,
+		      const struct user_regset *regset,
+		      unsigned int pos, unsigned int count,
+		      void *kbuf, void __user *ubuf)
+{
+	if (!target->thread.io_bitmap_ptr)
+		return -ENXIO;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   target->thread.io_bitmap_ptr,
+				   0, IO_BITMAP_BYTES);
+}
+
 #ifdef CONFIG_X86_PTRACE_BTS
 /*
  * The configuration for a particular BTS hardware implementation.
@@ -1385,6 +1410,12 @@
 		.size = sizeof(long), .align = sizeof(long),
 		.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
 	},
+	[REGSET_IOPERM64] = {
+		.core_note_type = NT_386_IOPERM,
+		.n = IO_BITMAP_LONGS,
+		.size = sizeof(long), .align = sizeof(long),
+		.active = ioperm_active, .get = ioperm_get
+	},
 };
 
 static const struct user_regset_view user_x86_64_view = {
@@ -1431,6 +1462,12 @@
 		.active = regset_tls_active,
 		.get = regset_tls_get, .set = regset_tls_set
 	},
+	[REGSET_IOPERM32] = {
+		.core_note_type = NT_386_IOPERM,
+		.n = IO_BITMAP_BYTES / sizeof(u32),
+		.size = sizeof(u32), .align = sizeof(u32),
+		.active = ioperm_active, .get = ioperm_get
+	},
 };
 
 static const struct user_regset_view user_x86_32_view = {
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 46c98ef..21b8e0a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -582,6 +582,190 @@
 struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
 
 /*
+ * Some BIOSes seem to corrupt the low 64k of memory during events
+ * like suspend/resume and unplugging an HDMI cable.  Reserve all
+ * remaining free memory in that area and fill it with a distinct
+ * pattern.
+ */
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+#define MAX_SCAN_AREAS	8
+
+static int __read_mostly memory_corruption_check = -1;
+
+static unsigned __read_mostly corruption_check_size = 64*1024;
+static unsigned __read_mostly corruption_check_period = 60; /* seconds */
+
+static struct e820entry scan_areas[MAX_SCAN_AREAS];
+static int num_scan_areas;
+
+
+static int set_corruption_check(char *arg)
+{
+	char *end;
+
+	memory_corruption_check = simple_strtol(arg, &end, 10);
+
+	return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check", set_corruption_check);
+
+static int set_corruption_check_period(char *arg)
+{
+	char *end;
+
+	corruption_check_period = simple_strtoul(arg, &end, 10);
+
+	return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_period", set_corruption_check_period);
+
+static int set_corruption_check_size(char *arg)
+{
+	char *end;
+	unsigned size;
+
+	size = memparse(arg, &end);
+
+	if (*end == '\0')
+		corruption_check_size = size;
+
+	return (size == corruption_check_size) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_size", set_corruption_check_size);
+
+
+static void __init setup_bios_corruption_check(void)
+{
+	u64 addr = PAGE_SIZE;	/* assume first page is reserved anyway */
+
+	if (memory_corruption_check == -1) {
+		memory_corruption_check =
+#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+			1
+#else
+			0
+#endif
+			;
+	}
+
+	if (corruption_check_size == 0)
+		memory_corruption_check = 0;
+
+	if (!memory_corruption_check)
+		return;
+
+	corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
+
+	while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
+		u64 size;
+		addr = find_e820_area_size(addr, &size, PAGE_SIZE);
+
+		if (addr == 0)
+			break;
+
+		if ((addr + size) > corruption_check_size)
+			size = corruption_check_size - addr;
+
+		if (size == 0)
+			break;
+
+		e820_update_range(addr, size, E820_RAM, E820_RESERVED);
+		scan_areas[num_scan_areas].addr = addr;
+		scan_areas[num_scan_areas].size = size;
+		num_scan_areas++;
+
+		/* Assume we've already mapped this early memory */
+		memset(__va(addr), 0, size);
+
+		addr += size;
+	}
+
+	printk(KERN_INFO "Scanning %d areas for low memory corruption\n",
+	       num_scan_areas);
+	update_e820();
+}
+
+static struct timer_list periodic_check_timer;
+
+void check_for_bios_corruption(void)
+{
+	int i;
+	int corruption = 0;
+
+	if (!memory_corruption_check)
+		return;
+
+	for(i = 0; i < num_scan_areas; i++) {
+		unsigned long *addr = __va(scan_areas[i].addr);
+		unsigned long size = scan_areas[i].size;
+
+		for(; size; addr++, size -= sizeof(unsigned long)) {
+			if (!*addr)
+				continue;
+			printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n",
+			       addr, __pa(addr), *addr);
+			corruption = 1;
+			*addr = 0;
+		}
+	}
+
+	WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n");
+}
+
+static void periodic_check_for_corruption(unsigned long data)
+{
+	check_for_bios_corruption();
+	mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ));
+}
+
+void start_periodic_check_for_corruption(void)
+{
+	if (!memory_corruption_check || corruption_check_period == 0)
+		return;
+
+	printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n",
+	       corruption_check_period);
+
+	init_timer(&periodic_check_timer);
+	periodic_check_timer.function = &periodic_check_for_corruption;
+	periodic_check_for_corruption(0);
+}
+#endif
+
+static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
+{
+	printk(KERN_NOTICE
+		"%s detected: BIOS may corrupt low RAM, working it around.\n",
+		d->ident);
+
+	e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
+	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+
+	return 0;
+}
+
+/* List of systems that have known low memory corruption BIOS problems */
+static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+	{
+		.callback = dmi_low_memory_corruption,
+		.ident = "AMI BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+		},
+	},
+	{
+		.callback = dmi_low_memory_corruption,
+		.ident = "Phoenix BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
+#endif
+	{}
+};
+
+/*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
  * for initialization.  Note, the efi init code path is determined by the
@@ -715,6 +899,10 @@
 
 	finish_e820_parsing();
 
+	dmi_scan_machine();
+
+	dmi_check_system(bad_bios_dmi_table);
+
 #ifdef CONFIG_X86_32
 	probe_roms();
 #endif
@@ -771,6 +959,10 @@
 	high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
 #endif
 
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+	setup_bios_corruption_check();
+#endif
+
 	/* max_pfn_mapped is updated here */
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
@@ -799,8 +991,6 @@
 	vsmp_init();
 #endif
 
-	dmi_scan_machine();
-
 	io_delay_init();
 
 	/*
@@ -903,3 +1093,5 @@
 #endif
 #endif
 }
+
+
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 07713d6..9abac8a 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -95,7 +95,9 @@
 	 	 * Start with clearing the user buffer. This will present a
 	 	 * clean context for the bytes not touched by the fxsave/xsave.
 		 */
-		__clear_user(buf, sig_xstate_size);
+		err = __clear_user(buf, sig_xstate_size);
+		if (err)
+			return err;
 
 		if (task_thread_info(tsk)->status & TS_XSAVE)
 			err = xsave_user(buf);
@@ -114,6 +116,8 @@
 
 	if (task_thread_info(tsk)->status & TS_XSAVE) {
 		struct _fpstate __user *fx = buf;
+		struct _xstate __user *x = buf;
+		u64 xstate_bv;
 
 		err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
 				     sizeof(struct _fpx_sw_bytes));
@@ -121,6 +125,31 @@
 		err |= __put_user(FP_XSTATE_MAGIC2,
 				  (__u32 __user *) (buf + sig_xstate_size
 						    - FP_XSTATE_MAGIC2_SIZE));
+
+		/*
+		 * Read the xstate_bv which we copied (directly from the cpu or
+		 * from the state in task struct) to the user buffers and
+		 * set the FP/SSE bits.
+		 */
+		err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+
+		/*
+		 * For legacy compatible, we always set FP/SSE bits in the bit
+		 * vector while saving the state to the user context. This will
+		 * enable us capturing any changes(during sigreturn) to
+		 * the FP/SSE bits by the legacy applications which don't touch
+		 * xstate_bv in the xsave header.
+		 *
+		 * xsave aware apps can change the xstate_bv in the xsave
+		 * header as well as change any contents in the memory layout.
+		 * xrestore as part of sigreturn will capture all the changes.
+		 */
+		xstate_bv |= XSTATE_FPSSE;
+
+		err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+
+		if (err)
+			return err;
 	}
 
 	return 1;
@@ -272,7 +301,7 @@
 /*
  * setup the xstate image representing the init state
  */
-void setup_xstate_init(void)
+static void __init setup_xstate_init(void)
 {
 	init_xstate_buf = alloc_bootmem(xstate_size);
 	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index c3789bb..bbe044d 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -31,6 +31,7 @@
 #include <linux/cpumask.h>
 
 #include <asm/asm.h>
+#include <asm/bios_ebda.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -969,6 +970,8 @@
 	int codesize, reservedpages, datasize, initsize;
 	int tmp;
 
+	start_periodic_check_for_corruption();
+
 #ifdef CONFIG_FLATMEM
 	BUG_ON(!mem_map);
 #endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 83e13f2..3e10054 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -31,6 +31,7 @@
 #include <linux/nmi.h>
 
 #include <asm/processor.h>
+#include <asm/bios_ebda.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -881,6 +882,8 @@
 {
 	long codesize, reservedpages, datasize, initsize;
 
+	start_periodic_check_for_corruption();
+
 	pci_iommu_alloc();
 
 	/* clear_bss() already clear the empty_zero_page */
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 10b5230..8cbeda1 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -24,19 +24,27 @@
 
 #ifdef CONFIG_X86_64
 
-unsigned long __phys_addr(unsigned long x)
-{
-	if (x >= __START_KERNEL_map)
-		return x - __START_KERNEL_map + phys_base;
-	return x - PAGE_OFFSET;
-}
-EXPORT_SYMBOL(__phys_addr);
-
 static inline int phys_addr_valid(unsigned long addr)
 {
 	return addr < (1UL << boot_cpu_data.x86_phys_bits);
 }
 
+unsigned long __phys_addr(unsigned long x)
+{
+	if (x >= __START_KERNEL_map) {
+		x -= __START_KERNEL_map;
+		VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
+		x += phys_base;
+	} else {
+		VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+		x -= PAGE_OFFSET;
+		VIRTUAL_BUG_ON(system_state == SYSTEM_BOOTING ? x > MAXMEM :
+					!phys_addr_valid(x));
+	}
+	return x;
+}
+EXPORT_SYMBOL(__phys_addr);
+
 #else
 
 static inline int phys_addr_valid(unsigned long addr)
@@ -44,6 +52,17 @@
 	return 1;
 }
 
+#ifdef CONFIG_DEBUG_VIRTUAL
+unsigned long __phys_addr(unsigned long x)
+{
+	/* VMALLOC_* aren't constants; not available at the boot time */
+	VIRTUAL_BUG_ON(x < PAGE_OFFSET || (system_state != SYSTEM_BOOTING &&
+					is_vmalloc_addr((void *)x)));
+	return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+#endif
+
 #endif
 
 int page_is_ram(unsigned long pagenr)
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 5799298..b697a13 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -210,143 +210,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
-	/* these fields are specified as 8 and 16 bit registers,
-	 * but some hosts can't perform 8 or 16 bit PCI accesses.
-	 */
-	u32		hc_capbase;
-#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
-#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
-	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
-#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
-#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
-#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-
-	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
-#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
-	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
-	/* USBCMD: offset 0x00 */
-	u32		command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
-#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
-#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
-#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
-#define CMD_ASE		(1<<5)		/* async schedule enable */
-#define CMD_PSE		(1<<4)		/* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-
-	/* USBSTS: offset 0x04 */
-	u32		status;
-#define STS_ASS		(1<<15)		/* Async Schedule Status */
-#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
-#define STS_RECL	(1<<13)		/* Reclamation */
-#define STS_HALT	(1<<12)		/* Not running (any reason) */
-/* some bits reserved */
-	/* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA		(1<<5)		/* Interrupted on async advance */
-#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
-#define STS_FLR		(1<<3)		/* frame list rolled over */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
-#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
-
-	/* USBINTR: offset 0x08 */
-	u32		intr_enable;
-
-	/* FRINDEX: offset 0x0C */
-	u32		frame_index;	/* current microframe number */
-	/* CTRLDSSEGMENT: offset 0x10 */
-	u32		segment;	/* address bits 63:32 if needed */
-	/* PERIODICLISTBASE: offset 0x14 */
-	u32		frame_list;	/* points to periodic list */
-	/* ASYNCLISTADDR: offset 0x18 */
-	u32		async_next;	/* address of next async queue head */
-
-	u32		reserved [9];
-
-	/* CONFIGFLAG: offset 0x40 */
-	u32		configured_flag;
-#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
-
-	/* PORTSC: offset 0x44 */
-	u32		port_status [0];	/* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
-#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
-#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF	(0<<14)
-#define PORT_LED_AMBER	(1<<14)
-#define PORT_LED_GREEN	(2<<14)
-#define PORT_LED_MASK	(3<<14)
-#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
-#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10))	/* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_OCC	(1<<5)		/* over current change */
-#define PORT_OC		(1<<4)		/* over current active */
-#define PORT_PEC	(1<<3)		/* port enable change */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE		0x68		/* USB Device mode */
-#define USBMODE_SDIS	(1<<3)		/* Stream disable */
-#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
-#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
-#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev,ep)	(((dev)<<8)|(ep))
-} __attribute__ ((packed));
+#include <linux/usb/ehci_def.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d85a74c..f79c204 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -673,7 +673,6 @@
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select VIDEO_SELECT
 	help
 	  This is the frame buffer device driver for generic VESA 2.0
 	  compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -1578,7 +1577,6 @@
 	tristate "Cyberblade/i1 support"
 	depends on FB && PCI && X86_32 && !64BIT
 	select FB_CFB_IMAGEBLIT
-	select VIDEO_SELECT
 	---help---
 	  This driver is supposed to support the Trident Cyberblade/i1
 	  graphics core integrated in the VIA VT8601A North Bridge,
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 06f87b0..2f50a80 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -43,22 +43,6 @@
 	 buffer.  Each 64KB will give you approximately 16 80x25
 	 screenfuls of scrollback buffer
 
-config VIDEO_SELECT
-	bool "Video mode selection support"
-	depends on  X86 && VGA_CONSOLE
-	---help---
-	  This enables support for text mode selection on kernel startup. If
-	  you want to take advantage of some high-resolution text mode your
-	  card's BIOS offers, but the traditional Linux utilities like
-	  SVGATextMode don't, you can say Y here and set the mode using the
-	  "vga=" option from your boot loader (lilo or loadlin) or set
-	  "vga=ask" which brings up a video mode menu on kernel startup. (Try
-	  "man bootparam" or see the documentation of your boot loader about
-	  how to pass options to the kernel.)
-
-	  Read the file <file:Documentation/svga.txt> for more information
-	  about the Video mode selection support. If unsure, say N.
-
 config MDA_CONSOLE
 	depends on !M68K && !PARISC && ISA
 	tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
diff --git a/include/asm-x86/bios_ebda.h b/include/asm-x86/bios_ebda.h
index ec42ed8..79b4b88 100644
--- a/include/asm-x86/bios_ebda.h
+++ b/include/asm-x86/bios_ebda.h
@@ -16,4 +16,21 @@
 
 void reserve_ebda_region(void);
 
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+/*
+ * This is obviously not a great place for this, but we want to be
+ * able to scatter it around anywhere in the kernel.
+ */
+void check_for_bios_corruption(void);
+void start_periodic_check_for_corruption(void);
+#else
+static inline void check_for_bios_corruption(void)
+{
+}
+
+static inline void start_periodic_check_for_corruption(void)
+{
+}
+#endif
+
 #endif /* ASM_X86__BIOS_EBDA_H */
diff --git a/include/asm-x86/boot.h b/include/asm-x86/boot.h
index 825de5d..1d63bd5 100644
--- a/include/asm-x86/boot.h
+++ b/include/asm-x86/boot.h
@@ -2,9 +2,7 @@
 #define ASM_X86__BOOT_H
 
 /* Don't touch these, unless you really know what you're doing. */
-#define DEF_INITSEG	0x9000
 #define DEF_SYSSEG	0x1000
-#define DEF_SETUPSEG	0x9020
 #define DEF_SYSSIZE	0x7F00
 
 /* Internal svga startup constants */
diff --git a/include/asm-x86/microcode.h b/include/asm-x86/microcode.h
new file mode 100644
index 0000000..62c793b
--- /dev/null
+++ b/include/asm-x86/microcode.h
@@ -0,0 +1,47 @@
+#ifndef ASM_X86__MICROCODE_H
+#define ASM_X86__MICROCODE_H
+
+struct cpu_signature {
+	unsigned int sig;
+	unsigned int pf;
+	unsigned int rev;
+};
+
+struct device;
+
+struct microcode_ops {
+	int  (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
+	int  (*request_microcode_fw) (int cpu, struct device *device);
+
+	void (*apply_microcode) (int cpu);
+
+	int  (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
+	void (*microcode_fini_cpu) (int cpu);
+};
+
+struct ucode_cpu_info {
+	struct cpu_signature cpu_sig;
+	int valid;
+	void *mc;
+};
+extern struct ucode_cpu_info ucode_cpu_info[];
+
+#ifdef CONFIG_MICROCODE_INTEL
+extern struct microcode_ops * __init init_intel_microcode(void);
+#else
+static inline struct microcode_ops * __init init_intel_microcode(void)
+{
+	return NULL;
+}
+#endif /* CONFIG_MICROCODE_INTEL */
+
+#ifdef CONFIG_MICROCODE_AMD
+extern struct microcode_ops * __init init_amd_microcode(void);
+#else
+static inline struct microcode_ops * __init init_amd_microcode(void)
+{
+	return NULL;
+}
+#endif
+
+#endif /* ASM_X86__MICROCODE_H */
diff --git a/include/asm-x86/mmzone_64.h b/include/asm-x86/mmzone_64.h
index 626b03a..6480f33 100644
--- a/include/asm-x86/mmzone_64.h
+++ b/include/asm-x86/mmzone_64.h
@@ -7,7 +7,7 @@
 
 #ifdef CONFIG_NUMA
 
-#define VIRTUAL_BUG_ON(x)
+#include <linux/mmdebug.h>
 
 #include <asm/smp.h>
 
@@ -29,7 +29,6 @@
 {
 	unsigned nid;
 	VIRTUAL_BUG_ON(!memnodemap);
-	VIRTUAL_BUG_ON((addr >> memnode_shift) >= memnodemapsize);
 	nid = memnodemap[addr >> memnode_shift];
 	VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
 	return nid;
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index 72f7305..9c5a737 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -73,7 +73,12 @@
 #endif
 
 #ifndef __ASSEMBLY__
+#define __phys_addr_const(x)	((x) - PAGE_OFFSET)
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern unsigned long __phys_addr(unsigned long);
+#else
 #define __phys_addr(x)		((x) - PAGE_OFFSET)
+#endif
 #define __phys_reloc_hide(x)	RELOC_HIDE((x), 0)
 
 #ifdef CONFIG_FLATMEM
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index c7d3546..ee7cbb3 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -586,41 +586,6 @@
 	write_cr4(cr4);
 }
 
-struct microcode_header {
-	unsigned int		hdrver;
-	unsigned int		rev;
-	unsigned int		date;
-	unsigned int		sig;
-	unsigned int		cksum;
-	unsigned int		ldrver;
-	unsigned int		pf;
-	unsigned int		datasize;
-	unsigned int		totalsize;
-	unsigned int		reserved[3];
-};
-
-struct microcode {
-	struct microcode_header	hdr;
-	unsigned int		bits[0];
-};
-
-typedef struct microcode	microcode_t;
-typedef struct microcode_header	microcode_header_t;
-
-/* microcode format is extended from prescott processors */
-struct extended_signature {
-	unsigned int		sig;
-	unsigned int		pf;
-	unsigned int		cksum;
-};
-
-struct extended_sigtable {
-	unsigned int		count;
-	unsigned int		cksum;
-	unsigned int		reserved[3];
-	struct extended_signature sigs[0];
-};
-
 typedef struct {
 	unsigned long		seg;
 } mm_segment_t;
diff --git a/include/linux/elf.h b/include/linux/elf.h
index edc3dac..0b61ca4 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -360,6 +360,7 @@
 #define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
 #define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
 #define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
 
 
 /* Note header in a PT_NOTE section */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 4194bf8..c61ba10 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -7,6 +7,7 @@
 
 #include <linux/gfp.h>
 #include <linux/list.h>
+#include <linux/mmdebug.h>
 #include <linux/mmzone.h>
 #include <linux/rbtree.h>
 #include <linux/prio_tree.h>
@@ -219,12 +220,6 @@
  */
 #include <linux/page-flags.h>
 
-#ifdef CONFIG_DEBUG_VM
-#define VM_BUG_ON(cond) BUG_ON(cond)
-#else
-#define VM_BUG_ON(condition) do { } while(0)
-#endif
-
 /*
  * Methods to modify the page usage count.
  *
diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h
new file mode 100644
index 0000000..8a55098
--- /dev/null
+++ b/include/linux/mmdebug.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_MM_DEBUG_H
+#define LINUX_MM_DEBUG_H 1
+
+#include <linux/autoconf.h>
+
+#ifdef CONFIG_DEBUG_VM
+#define VM_BUG_ON(cond) BUG_ON(cond)
+#else
+#define VM_BUG_ON(cond) do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+#define VIRTUAL_BUG_ON(cond) BUG_ON(cond)
+#else
+#define VIRTUAL_BUG_ON(cond) do { } while (0)
+#endif
+
+#endif
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
new file mode 100644
index 0000000..5b88e36
--- /dev/null
+++ b/include/linux/usb/ehci_def.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
+#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
+#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
+#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
+#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
+	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+	/* USBCMD: offset 0x00 */
+	u32		command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
+/* some bits reserved */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32		reserved [9];
+
+	/* CONFIGFLAG: offset 0x40 */
+	u32		configured_flag;
+#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
+
+	/* PORTSC: offset 0x44 */
+	u32		port_status [0];	/* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
+#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
+#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF	(0<<14)
+#define PORT_LED_AMBER	(1<<14)
+#define PORT_LED_GREEN	(2<<14)
+#define PORT_LED_MASK	(3<<14)
+#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
+#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_OCC	(1<<5)		/* over current change */
+#define PORT_OC		(1<<4)		/* over current active */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
+#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+#define USBMODE		0x68		/* USB Device mode */
+#define USBMODE_SDIS	(1<<3)		/* Stream disable */
+#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
+#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
+#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console.  (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ce697e0..aa81d28 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -495,6 +495,15 @@
 
 	  If unsure, say N.
 
+config DEBUG_VIRTUAL
+	bool "Debug VM translations"
+	depends on DEBUG_KERNEL && X86
+	help
+	  Enable some costly sanity checks in virtual to page code. This can
+	  catch mistakes with virt_to_page() and friends.
+
+	  If unsure, say N.
+
 config DEBUG_WRITECOUNT
 	bool "Debug filesystem writers count"
 	depends on DEBUG_KERNEL
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 85b9a0d..bba06c4 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -180,6 +180,13 @@
 	pmd_t *pmd;
 	pte_t *ptep, pte;
 
+	/*
+	 * XXX we might need to change this if we add VIRTUAL_BUG_ON for
+	 * architectures that do not vmalloc module space
+	 */
+	VIRTUAL_BUG_ON(!is_vmalloc_addr(vmalloc_addr) &&
+			!is_module_address(addr));
+
 	if (!pgd_none(*pgd)) {
 		pud = pud_offset(pgd, addr);
 		if (!pud_none(*pud)) {
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index d64e6ba..982dcae 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -105,12 +105,12 @@
 # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
 
 cc-option = $(call try-run,\
-	$(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",$(1),$(2))
+	$(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
 
 # cc-option-yn
 # Usage: flag := $(call cc-option-yn,-march=winchip-c6)
 cc-option-yn = $(call try-run,\
-	$(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",y,n)
+	$(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
 
 # cc-option-align
 # Prefix align with either -falign or -malign