ipg: fix checkpatch reported errors
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Sorbica Shieh <sorbica@icplus.com.tw>
Cc: Jesse Huang <jesse@icplus.com.tw>
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 3099a7b..5d93eca 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -34,9 +34,9 @@
IPG_AC_DMA | IPG_AC_FIFO | IPG_AC_NETWORK | IPG_AC_HOST | \
IPG_AC_AUTO_INIT)
-#define ipg_w32(val32,reg) iowrite32((val32), ioaddr + (reg))
-#define ipg_w16(val16,reg) iowrite16((val16), ioaddr + (reg))
-#define ipg_w8(val8,reg) iowrite8((val8), ioaddr + (reg))
+#define ipg_w32(val32, reg) iowrite32((val32), ioaddr + (reg))
+#define ipg_w16(val16, reg) iowrite16((val16), ioaddr + (reg))
+#define ipg_w8(val8, reg) iowrite8((val8), ioaddr + (reg))
#define ipg_r32(reg) ioread32(ioaddr + (reg))
#define ipg_r16(reg) ioread16(ioaddr + (reg))
@@ -54,20 +54,22 @@
MODULE_DESCRIPTION("IC Plus IP1000 Gigabit Ethernet Adapter Linux Driver");
MODULE_LICENSE("GPL");
-//variable record -- index by leading revision/length
-//Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
+/*
+ * Variable record -- index by leading revision/length
+ * Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
+ */
static unsigned short DefaultPhyParam[] = {
- // 11/12/03 IP1000A v1-3 rev=0x40
+ /* 11/12/03 IP1000A v1-3 rev=0x40 */
/*--------------------------------------------------------------------------
(0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2,
27, 0x0c10, 28, 0x0c10, 29, 0x2c10, 31, 0x0003, 23, 0x92f6,
31, 0x0000, 23, 0x003d, 30, 0x00de, 20, 0x20e7, 9, 0x0700,
--------------------------------------------------------------------------*/
- // 12/17/03 IP1000A v1-4 rev=0x40
+ /* 12/17/03 IP1000A v1-4 rev=0x40 */
(0x4000 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
0x0000,
30, 0x005e, 9, 0x0700,
- // 01/09/04 IP1000A v1-5 rev=0x41
+ /* 01/09/04 IP1000A v1-5 rev=0x41 */
(0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
0x0000,
30, 0x005e, 9, 0x0700,
@@ -187,7 +189,7 @@
phyctrlpolarity) & IPG_PC_RSVD_MASK, PHY_CTRL);
}
-static u16 read_phy_bit(void __iomem * ioaddr, u8 phyctrlpolarity)
+static u16 read_phy_bit(void __iomem *ioaddr, u8 phyctrlpolarity)
{
u16 bit_data;
@@ -204,7 +206,7 @@
* Read a register from the Physical Layer device located
* on the IPG NIC, using the IPG PHYCTRL register.
*/
-static int mdio_read(struct net_device * dev, int phy_id, int phy_reg)
+static int mdio_read(struct net_device *dev, int phy_id, int phy_reg)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
@@ -548,7 +550,7 @@
printk("\n");
} else {
/* Configure IPG for half duplex operation. */
- printk(KERN_INFO "%s: setting half duplex, "
+ printk(KERN_INFO "%s: setting half duplex, "
"no TX flow control, no RX flow control.\n", dev->name);
mac_ctrl_val &= ~IPG_MC_DUPLEX_SELECT_FD &
@@ -1080,12 +1082,12 @@
#ifdef JUMBO_FRAME
/* use jumboindex and jumbosize to control jumbo frame status
- initial status is jumboindex=-1 and jumbosize=0
- 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done.
- 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving
- 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump
- previous receiving and need to continue dumping the current one
-*/
+ * initial status is jumboindex=-1 and jumbosize=0
+ * 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done.
+ * 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving
+ * 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump
+ * previous receiving and need to continue dumping the current one
+ */
enum {
NORMAL_PACKET,
ERROR_PACKET
@@ -1200,7 +1202,7 @@
jumbo->skb = NULL;
}
- // 1: found error, 0 no error
+ /* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
return;
@@ -1208,7 +1210,7 @@
if (!skb)
return;
- // accept this frame and send to upper layer
+ /* accept this frame and send to upper layer */
framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN;
if (framelen > IPG_RXFRAG_SIZE)
framelen = IPG_RXFRAG_SIZE;
@@ -1229,11 +1231,11 @@
struct pci_dev *pdev = sp->pdev;
struct sk_buff *skb;
- // 1: found error, 0 no error
+ /* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
return;
- // accept this frame and send to upper layer
+ /* accept this frame and send to upper layer */
skb = sp->rx_buff[entry];
if (!skb)
return;
@@ -1260,7 +1262,7 @@
{
struct ipg_jumbo *jumbo = &sp->jumbo;
- //1: found error, 0 no error
+ /* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
struct sk_buff *skb = sp->rx_buff[entry];
@@ -1311,7 +1313,7 @@
{
struct ipg_jumbo *jumbo = &sp->jumbo;
- //1: found error, 0 no error
+ /* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
struct sk_buff *skb = sp->rx_buff[entry];
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index 8b10d63..cda5388 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -51,7 +51,7 @@
/* I/O register offsets. */
enum ipg_regs {
DMA_CTRL = 0x00,
- RX_DMA_STATUS = 0x08, // Unused + reserved
+ RX_DMA_STATUS = 0x08, /* Unused + reserved */
TFD_LIST_PTR_0 = 0x10,
TFD_LIST_PTR_1 = 0x14,
TX_DMA_BURST_THRESH = 0x18,
@@ -64,21 +64,21 @@
RX_DMA_POLL_PERIOD = 0x26,
DEBUG_CTRL = 0x2c,
ASIC_CTRL = 0x30,
- FIFO_CTRL = 0x38, // Unused
+ FIFO_CTRL = 0x38, /* Unused */
FLOW_OFF_THRESH = 0x3c,
FLOW_ON_THRESH = 0x3e,
EEPROM_DATA = 0x48,
EEPROM_CTRL = 0x4a,
- EXPROM_ADDR = 0x4c, // Unused
- EXPROM_DATA = 0x50, // Unused
- WAKE_EVENT = 0x51, // Unused
- COUNTDOWN = 0x54, // Unused
+ EXPROM_ADDR = 0x4c, /* Unused */
+ EXPROM_DATA = 0x50, /* Unused */
+ WAKE_EVENT = 0x51, /* Unused */
+ COUNTDOWN = 0x54, /* Unused */
INT_STATUS_ACK = 0x5a,
INT_ENABLE = 0x5c,
- INT_STATUS = 0x5e, // Unused
+ INT_STATUS = 0x5e, /* Unused */
TX_STATUS = 0x60,
MAC_CTRL = 0x6c,
- VLAN_TAG = 0x70, // Unused
+ VLAN_TAG = 0x70, /* Unused */
PHY_SET = 0x75,
PHY_CTRL = 0x76,
STATION_ADDRESS_0 = 0x78,
@@ -90,11 +90,11 @@
HASHTABLE_1 = 0x90,
RMON_STATISTICS_MASK = 0x98,
STATISTICS_MASK = 0x9c,
- RX_JUMBO_FRAMES = 0xbc, // Unused
- TCP_CHECKSUM_ERRORS = 0xc0, // Unused
- IP_CHECKSUM_ERRORS = 0xc2, // Unused
- UDP_CHECKSUM_ERRORS = 0xc4, // Unused
- TX_JUMBO_FRAMES = 0xf4 // Unused
+ RX_JUMBO_FRAMES = 0xbc, /* Unused */
+ TCP_CHECKSUM_ERRORS = 0xc0, /* Unused */
+ IP_CHECKSUM_ERRORS = 0xc2, /* Unused */
+ UDP_CHECKSUM_ERRORS = 0xc4, /* Unused */
+ TX_JUMBO_FRAMES = 0xf4 /* Unused */
};
/* Ethernet MIB statistic register offsets. */
@@ -590,7 +590,7 @@
* Define larger if expecting jumbo frames.
*/
#ifdef JUMBO_FRAME
-//IPG_TXFRAG_SIZE must <= 0x2b00, or TX will crash
+/* IPG_TXFRAG_SIZE must <= 0x2b00, or TX will crash */
#define IPG_TXFRAG_SIZE JUMBO_FRAME_SIZE
#endif
@@ -598,7 +598,7 @@
* Define larger if expecting jumbo frames.
*/
#ifdef JUMBO_FRAME
-//4088=4096-8
+/* 4088 = 4096 - 8 */
#define IPG_RXFRAG_SIZE __IPG_RXFRAG_SIZE
#define IPG_RXSUPPORT_SIZE IPG_MAX_RXFRAME_SIZE
#else
@@ -628,7 +628,7 @@
/* specify the jumbo frame maximum size
* per unit is 0x600 (the rx_buffer size that one RFD can carry)
*/
-#define MAX_JUMBOSIZE 0x8 // max is 12K
+#define MAX_JUMBOSIZE 0x8 /* max is 12K */
/* Key register values loaded at driver start up. */