diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 81f57e8..8cdbc4c 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -98,12 +98,6 @@
 	help
 	  This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).
 
-config XTENSA_VARIANT_S6000
-	bool "s6000 - Stretch software configurable processor"
-	select VARIANT_IRQ_SWITCH
-	select ARCH_REQUIRE_GPIOLIB
-	select XTENSA_CALIBRATE_CCOUNT
-
 config XTENSA_VARIANT_CUSTOM
 	bool "Custom Xtensa processor configuration"
 	select MAY_HAVE_SMP
@@ -126,7 +120,6 @@
 	default "dc232b"			if XTENSA_VARIANT_DC232B
 	default "dc233c"			if XTENSA_VARIANT_DC233C
 	default "fsf"				if XTENSA_VARIANT_FSF
-	default "s6000"				if XTENSA_VARIANT_S6000
 	default XTENSA_VARIANT_CUSTOM_NAME	if XTENSA_VARIANT_CUSTOM
 
 config XTENSA_VARIANT_MMU
@@ -191,7 +184,6 @@
 
 config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 	bool "Initialize Xtensa MMU inside the Linux kernel code"
-	depends on MMU
 	default y
 	help
 	  Earlier version initialized the MMU in the exception vector
@@ -311,15 +303,10 @@
 	  XT2000 is the name of Tensilica's feature-rich emulation platform.
 	  This hardware is capable of running a full Linux distribution.
 
-config XTENSA_PLATFORM_S6105
-	bool "S6105"
-	select HAVE_IDE
-	select SERIAL_CONSOLE
-	select NO_IOPORT_MAP
-
 config XTENSA_PLATFORM_XTFPGA
 	bool "XTFPGA"
 	select ETHOC if ETHERNET
+	select PLATFORM_WANT_DEFAULT_MEM
 	select SERIAL_CONSOLE
 	select XTENSA_CALIBRATE_CCOUNT
 	help
@@ -406,6 +393,41 @@
 
 source "drivers/pci/hotplug/Kconfig"
 
+config PLATFORM_WANT_DEFAULT_MEM
+	def_bool n
+
+config DEFAULT_MEM_START
+	hex "Physical address of the default memory area start"
+	depends on PLATFORM_WANT_DEFAULT_MEM
+	default 0x00000000 if MMU
+	default 0x40000000 if !MMU
+	help
+	  This is a fallback start address of the default memory area, it is
+	  used when no physical memory size is passed through DTB or through
+	  boot parameter from bootloader.
+
+	  In noMMU configuration the following parameters are derived from it:
+	  - kernel load address;
+	  - kernel entry point address;
+	  - relocatable vectors base address;
+	  - uBoot load address;
+	  - TASK_SIZE.
+
+	  If unsure, leave the default value here.
+
+config DEFAULT_MEM_SIZE
+	hex "Maximal size of the default memory area"
+	depends on PLATFORM_WANT_DEFAULT_MEM
+	default 0x04000000
+	help
+	  This is a fallback size of the default memory area, it is used when
+	  no physical memory size is passed through DTB or through boot
+	  parameter from bootloader.
+
+	  It's also used for TASK_SIZE calculation in noMMU configuration.
+
+	  If unsure, leave the default value here.
+
 endmenu
 
 menu "Executable file formats"
diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
index af7da74..53ae08e 100644
--- a/arch/xtensa/Kconfig.debug
+++ b/arch/xtensa/Kconfig.debug
@@ -4,7 +4,7 @@
 
 config DEBUG_TLB_SANITY
 	bool "Debug TLB sanity"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && MMU
 	help
 	  Enable this to turn on TLB sanity check on each entry to userspace.
 	  This check can spot missing TLB invalidation/wrong PTE permissions/
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 4725330..f9e6a06 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -35,7 +35,6 @@
 
 platform-$(CONFIG_XTENSA_PLATFORM_XT2000)	:= xt2000
 platform-$(CONFIG_XTENSA_PLATFORM_ISS)		:= iss
-platform-$(CONFIG_XTENSA_PLATFORM_S6105)	:= s6105
 platform-$(CONFIG_XTENSA_PLATFORM_XTFPGA)	:= xtfpga
 
 PLATFORM = $(platform-y)
diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S
index 932b58e..958b33a 100644
--- a/arch/xtensa/boot/boot-elf/boot.lds.S
+++ b/arch/xtensa/boot/boot-elf/boot.lds.S
@@ -41,6 +41,7 @@
 		__bss_end = .;
 	}
 
+#ifdef CONFIG_MMU
 	/*
 	 * This is a remapped copy of the Reset Vector Code.
 	 * It keeps gdb in sync with the PC after switching
@@ -51,4 +52,5 @@
 	{
 		*(.ResetVector.remapped_text)
 	}
+#endif
 }
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
index 1388a49..9341a57 100644
--- a/arch/xtensa/boot/boot-elf/bootstrap.S
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -20,6 +20,7 @@
 #include <asm/page.h>
 #include <asm/cacheasm.h>
 #include <asm/initialize_mmu.h>
+#include <asm/vectors.h>
 #include <linux/linkage.h>
 
 	.section	.ResetVector.text, "ax"
@@ -34,12 +35,7 @@
 
 	.align 4
 RomInitAddr:
-#if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \
-	XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
-	.word 0x00003000
-#else
-	.word 0xd0003000
-#endif
+	.word	LOAD_MEMORY_ADDRESS
 RomBootParam:
 	.word _bootparam
 _bootparam:
@@ -79,6 +75,7 @@
 	movi	a4, 0
 	jx      a0
 
+#ifdef CONFIG_MMU
 	.align 4
 
 	.section	.ResetVector.remapped_text, "x"
@@ -102,3 +99,4 @@
 #endif
 
 	.end    no-absolute-literals
+#endif
diff --git a/arch/xtensa/boot/boot-uboot/Makefile b/arch/xtensa/boot/boot-uboot/Makefile
index 5457598..403fcf2 100644
--- a/arch/xtensa/boot/boot-uboot/Makefile
+++ b/arch/xtensa/boot/boot-uboot/Makefile
@@ -4,11 +4,15 @@
 # for more details.
 #
 
+ifdef CONFIG_MMU
 ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 UIMAGE_LOADADDR = 0x00003000
 else
 UIMAGE_LOADADDR = 0xd0003000
 endif
+else
+UIMAGE_LOADADDR = $(shell printf "0x%x" $$(( ${CONFIG_DEFAULT_MEM_START} + 0x3000 )) )
+endif
 UIMAGE_COMPRESSION = gzip
 
 $(obj)/../uImage: vmlinux.bin.gz FORCE
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index b966baf..6a7593b 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -143,7 +143,6 @@
 #
 CONFIG_XTENSA_VARIANT_FSF=y
 # CONFIG_XTENSA_VARIANT_DC232B is not set
-# CONFIG_XTENSA_VARIANT_S6000 is not set
 # CONFIG_XTENSA_UNALIGNED_USER is not set
 # CONFIG_PREEMPT is not set
 CONFIG_XTENSA_CALIBRATE_CCOUNT=y
@@ -161,7 +160,6 @@
 #
 CONFIG_XTENSA_PLATFORM_ISS=y
 # CONFIG_XTENSA_PLATFORM_XT2000 is not set
-# CONFIG_XTENSA_PLATFORM_S6105 is not set
 # CONFIG_GENERIC_CALIBRATE_DELAY is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target"
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
deleted file mode 100644
index 9471265..0000000
--- a/arch/xtensa/configs/s6105_defconfig
+++ /dev/null
@@ -1,615 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7-s6
-# Tue Mar 10 11:09:26 2009
-#
-# CONFIG_FRAME_POINTER is not set
-CONFIG_ZONE_DMA=y
-CONFIG_XTENSA=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
-# CONFIG_RCU_TRACE is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EXPERT=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-# CONFIG_MMU is not set
-CONFIG_VARIANT_IRQ_SWITCH=y
-
-#
-# Processor type and features
-#
-# CONFIG_XTENSA_VARIANT_FSF is not set
-# CONFIG_XTENSA_VARIANT_DC232B is not set
-CONFIG_XTENSA_VARIANT_S6000=y
-# CONFIG_XTENSA_UNALIGNED_USER is not set
-CONFIG_PREEMPT=y
-# CONFIG_HIGHMEM is not set
-CONFIG_XTENSA_CALIBRATE_CCOUNT=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_XTENSA_ISS_NETWORK is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Platform options
-#
-# CONFIG_XTENSA_PLATFORM_ISS is not set
-# CONFIG_XTENSA_PLATFORM_XT2000 is not set
-CONFIG_XTENSA_PLATFORM_S6105=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Executable file formats
-#
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_S6GMAC=y
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-# CONFIG_RTC_INTF_SYSFS is not set
-# CONFIG_RTC_INTF_PROC is not set
-# CONFIG_RTC_INTF_DEV is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_DEBUG_NOMMU_REGIONS=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index e72aaca..5f67ace 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -67,6 +67,8 @@
 #else
 static inline void __flush_invalidate_dcache_page_alias(unsigned long virt,
 							unsigned long phys) { }
+static inline void __invalidate_dcache_page_alias(unsigned long virt,
+						  unsigned long phys) { }
 #endif
 #if defined(CONFIG_MMU) && (ICACHE_WAY_SIZE > PAGE_SIZE)
 extern void __invalidate_icache_page_alias(unsigned long, unsigned long);
@@ -84,7 +86,8 @@
  * (see also Documentation/cachetlb.txt)
  */
 
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) || defined(CONFIG_SMP)
+#if defined(CONFIG_MMU) && \
+	((DCACHE_WAY_SIZE > PAGE_SIZE) || defined(CONFIG_SMP))
 
 #ifdef CONFIG_SMP
 void flush_cache_all(void);
@@ -150,7 +153,7 @@
 #define flush_dcache_mmap_lock(mapping)			do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)		do { } while (0)
 
-#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE)
 
 extern void copy_to_user_page(struct vm_area_struct*, struct page*,
 		unsigned long, void*, const void*, unsigned long);
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 600781e..e256f22 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -26,8 +26,16 @@
 #include <asm/pgtable.h>
 #include <asm/vectors.h>
 
+#if XCHAL_HAVE_PTP_MMU
 #define CA_BYPASS	(_PAGE_CA_BYPASS | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
 #define CA_WRITEBACK	(_PAGE_CA_WB     | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
+#else
+#define CA_WRITEBACK	(0x4)
+#endif
+
+#ifndef XCHAL_SPANNING_WAY
+#define XCHAL_SPANNING_WAY 0
+#endif
 
 #ifdef __ASSEMBLY__
 
@@ -75,7 +83,7 @@
 
 	/* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */
 
-	movi	a2, 0x40000006
+	movi	a2, 0x40000000 | XCHAL_SPANNING_WAY
 	idtlb	a2
 	iitlb	a2
 	isync
@@ -141,9 +149,6 @@
 	jx	a4
 
 1:
-	movi    a2, VECBASE_RESET_VADDR
-	wsr	a2, vecbase
-
 	/* Step 5: remove temporary mapping. */
 	idtlb	a7
 	iitlb	a7
@@ -156,6 +161,33 @@
 #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
 	  XCHAL_HAVE_SPANNING_WAY */
 
+#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS
+	/* Enable data and instruction cache in the DEFAULT_MEMORY region
+	 * if the processor has DTLB and ITLB.
+	 */
+
+	movi	a5, PLATFORM_DEFAULT_MEM_START | XCHAL_SPANNING_WAY
+	movi	a6, ~_PAGE_ATTRIB_MASK
+	movi	a7, CA_WRITEBACK
+	movi	a8, 0x20000000
+	movi	a9, PLATFORM_DEFAULT_MEM_SIZE
+	j	2f
+1:
+	sub	a9, a9, a8
+2:
+	rdtlb1	a3, a5
+	ritlb1	a4, a5
+	and	a3, a3, a6
+	and	a4, a4, a6
+	or	a3, a3, a7
+	or	a4, a4, a7
+	wdtlb	a3, a5
+	witlb	a4, a5
+	add	a5, a5, a8
+	bltu	a8, a9, 1b
+
+#endif
+
 	.endm
 
 #endif /*__ASSEMBLY__*/
diff --git a/arch/xtensa/include/asm/mmu_context.h b/arch/xtensa/include/asm/mmu_context.h
index d33c71a..04c8ebd 100644
--- a/arch/xtensa/include/asm/mmu_context.h
+++ b/arch/xtensa/include/asm/mmu_context.h
@@ -50,11 +50,7 @@
 #define ASID_MASK	((1 << XCHAL_MMU_ASID_BITS) - 1)
 #define ASID_INSERT(x)	(0x03020001 | (((x) & ASID_MASK) << 8))
 
-#ifdef CONFIG_MMU
 void init_mmu(void);
-#else
-static inline void init_mmu(void) { }
-#endif
 
 static inline void set_rasid_register (unsigned long val)
 {
diff --git a/arch/xtensa/include/asm/nommu_context.h b/arch/xtensa/include/asm/nommu_context.h
index 3407cf7..22984fd 100644
--- a/arch/xtensa/include/asm/nommu_context.h
+++ b/arch/xtensa/include/asm/nommu_context.h
@@ -1,3 +1,7 @@
+static inline void init_mmu(void)
+{
+}
+
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
 }
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index abe24c6..ad38500 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -20,10 +20,10 @@
  * Fixed TLB translations in the processor.
  */
 
-#define XCHAL_KSEG_CACHED_VADDR 0xd0000000
-#define XCHAL_KSEG_BYPASS_VADDR 0xd8000000
-#define XCHAL_KSEG_PADDR        0x00000000
-#define XCHAL_KSEG_SIZE         0x08000000
+#define XCHAL_KSEG_CACHED_VADDR __XTENSA_UL_CONST(0xd0000000)
+#define XCHAL_KSEG_BYPASS_VADDR __XTENSA_UL_CONST(0xd8000000)
+#define XCHAL_KSEG_PADDR        __XTENSA_UL_CONST(0x00000000)
+#define XCHAL_KSEG_SIZE         __XTENSA_UL_CONST(0x08000000)
 
 /*
  * PAGE_SHIFT determines the page size
@@ -37,7 +37,7 @@
 #define PAGE_OFFSET	XCHAL_KSEG_CACHED_VADDR
 #define MAX_MEM_PFN	XCHAL_KSEG_SIZE
 #else
-#define PAGE_OFFSET	0
+#define PAGE_OFFSET	__XTENSA_UL_CONST(0)
 #define MAX_MEM_PFN	(PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
 #endif
 
@@ -145,7 +145,7 @@
  * some extra work
  */
 
-#if DCACHE_WAY_SIZE > PAGE_SIZE
+#if defined(CONFIG_MMU) && DCACHE_WAY_SIZE > PAGE_SIZE
 extern void clear_page_alias(void *vaddr, unsigned long paddr);
 extern void copy_page_alias(void *to, void *from,
 			    unsigned long to_paddr, unsigned long from_paddr);
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index 0383aed..872bf01 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -178,6 +178,7 @@
 
 #else /* no mmu */
 
+# define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
 # define PAGE_NONE       __pgprot(0)
 # define PAGE_SHARED     __pgprot(0)
 # define PAGE_COPY       __pgprot(0)
diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h
index f74ddfb..a46c53f 100644
--- a/arch/xtensa/include/asm/vectors.h
+++ b/arch/xtensa/include/asm/vectors.h
@@ -19,6 +19,7 @@
 #define _XTENSA_VECTORS_H
 
 #include <variant/core.h>
+#include <platform/hardware.h>
 
 #define XCHAL_KIO_CACHED_VADDR		0xe0000000
 #define XCHAL_KIO_BYPASS_VADDR		0xf0000000
@@ -51,13 +52,13 @@
   /* MMU Not being used - Virtual == Physical */
 
   /* VECBASE */
-  #define VIRTUAL_MEMORY_ADDRESS	0x00002000
+  #define VIRTUAL_MEMORY_ADDRESS	(PLATFORM_DEFAULT_MEM_START + 0x2000)
 
   /* Location of the start of the kernel text, _start */
-  #define KERNELOFFSET			0x00003000
+  #define KERNELOFFSET			(PLATFORM_DEFAULT_MEM_START + 0x3000)
 
   /* Loaded just above possibly live vectors */
-  #define LOAD_MEMORY_ADDRESS		0x00003000
+  #define LOAD_MEMORY_ADDRESS		(PLATFORM_DEFAULT_MEM_START + 0x3000)
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h
index 00eed67..201aec0 100644
--- a/arch/xtensa/include/uapi/asm/mman.h
+++ b/arch/xtensa/include/uapi/asm/mman.h
@@ -55,6 +55,12 @@
 #define MAP_NONBLOCK	0x20000		/* do not block on IO */
 #define MAP_STACK	0x40000		/* give out an address that is best suited for process/thread stacks */
 #define MAP_HUGETLB	0x80000		/* create a huge page mapping */
+#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED
+# define MAP_UNINITIALIZED 0x4000000	/* For anonymous mmap, memory could be
+					 * uninitialized */
+#else
+# define MAP_UNINITIALIZED 0x0		/* Don't support this flag */
+#endif
 
 /*
  * Flags for msync
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index aeeb3cc..15a461e 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -112,6 +112,11 @@
 
 	movi	a0, 0
 
+#if XCHAL_HAVE_VECBASE
+	movi    a2, VECBASE_RESET_VADDR
+	wsr	a2, vecbase
+#endif
+
 	/* Clear debugging registers. */
 
 #if XCHAL_HAVE_DEBUG
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index 5d3f7a1..83cf496 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -57,6 +57,7 @@
 	return sys_fadvise64_64(fd, offset, len, advice);
 }
 
+#ifdef CONFIG_MMU
 unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
@@ -93,3 +94,4 @@
 			addr = COLOUR_ALIGN(addr, pgoff);
 	}
 }
+#endif
diff --git a/arch/xtensa/mm/Makefile b/arch/xtensa/mm/Makefile
index f54f78e..e601e2f 100644
--- a/arch/xtensa/mm/Makefile
+++ b/arch/xtensa/mm/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the Linux/Xtensa-specific parts of the memory manager.
 #
 
-obj-y			:= init.o cache.o misc.o
-obj-$(CONFIG_MMU)	+= fault.o mmu.o tlb.o
+obj-y			:= init.o misc.o
+obj-$(CONFIG_MMU)	+= cache.o fault.o mmu.o tlb.o
 obj-$(CONFIG_HIGHMEM)	+= highmem.o
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 77ed202..9a9a593 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -239,6 +239,17 @@
 	unsigned long bootmap_start, bootmap_size;
 	int i;
 
+	/* Reserve all memory below PLATFORM_DEFAULT_MEM_START, as memory
+	 * accounting doesn't work for pages below that address.
+	 *
+	 * If PLATFORM_DEFAULT_MEM_START is zero reserve page at address 0:
+	 * successfull allocations should never return NULL.
+	 */
+	if (PLATFORM_DEFAULT_MEM_START)
+		mem_reserve(0, PLATFORM_DEFAULT_MEM_START, 0);
+	else
+		mem_reserve(0, 1, 0);
+
 	sysmem_dump();
 	max_low_pfn = max_pfn = 0;
 	min_low_pfn = ~0;
@@ -332,18 +343,24 @@
 		"    pkmap   : 0x%08lx - 0x%08lx  (%5lu kB)\n"
 		"    fixmap  : 0x%08lx - 0x%08lx  (%5lu kB)\n"
 #endif
+#ifdef CONFIG_MMU
 		"    vmalloc : 0x%08x - 0x%08x  (%5u MB)\n"
-		"    lowmem  : 0x%08x - 0x%08lx  (%5lu MB)\n",
+#endif
+		"    lowmem  : 0x%08lx - 0x%08lx  (%5lu MB)\n",
 #ifdef CONFIG_HIGHMEM
 		PKMAP_BASE, PKMAP_BASE + LAST_PKMAP * PAGE_SIZE,
 		(LAST_PKMAP*PAGE_SIZE) >> 10,
 		FIXADDR_START, FIXADDR_TOP,
 		(FIXADDR_TOP - FIXADDR_START) >> 10,
 #endif
+#ifdef CONFIG_MMU
 		VMALLOC_START, VMALLOC_END,
 		(VMALLOC_END - VMALLOC_START) >> 20,
 		PAGE_OFFSET, PAGE_OFFSET +
 		(max_low_pfn - min_low_pfn) * PAGE_SIZE,
+#else
+		min_low_pfn * PAGE_SIZE, max_low_pfn * PAGE_SIZE,
+#endif
 		((max_low_pfn - min_low_pfn) * PAGE_SIZE) >> 20);
 }
 
diff --git a/arch/xtensa/platforms/s6105/Makefile b/arch/xtensa/platforms/s6105/Makefile
deleted file mode 100644
index 0be6194..0000000
--- a/arch/xtensa/platforms/s6105/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# Makefile for the Stretch S6105 eval board
-
-obj-y		:= setup.o device.o
diff --git a/arch/xtensa/platforms/s6105/device.c b/arch/xtensa/platforms/s6105/device.c
deleted file mode 100644
index 4f4fc97..0000000
--- a/arch/xtensa/platforms/s6105/device.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * s6105 platform devices
- *
- * Copyright (c) 2009 emlix GmbH
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-
-#include <variant/hardware.h>
-#include <variant/dmac.h>
-
-#include <platform/gpio.h>
-
-#define GPIO3_INTNUM		3
-#define UART_INTNUM		4
-#define GMAC_INTNUM		5
-
-static const signed char gpio3_irq_mappings[] = {
-	S6_INTC_GPIO(3),
-	-1
-};
-
-static const signed char uart_irq_mappings[] = {
-	S6_INTC_UART(0),
-	S6_INTC_UART(1),
-	-1,
-};
-
-static const signed char gmac_irq_mappings[] = {
-	S6_INTC_GMAC_STAT,
-	S6_INTC_GMAC_ERR,
-	S6_INTC_DMA_HOSTTERMCNT(0),
-	S6_INTC_DMA_HOSTTERMCNT(1),
-	-1
-};
-
-const signed char *platform_irq_mappings[NR_IRQS] = {
-	[GPIO3_INTNUM] = gpio3_irq_mappings,
-	[UART_INTNUM] = uart_irq_mappings,
-	[GMAC_INTNUM] = gmac_irq_mappings,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase = (void *)S6_REG_UART + 0x0000,
-		.mapbase = S6_REG_UART + 0x0000,
-		.irq = UART_INTNUM,
-		.uartclk = S6_SCLK,
-		.regshift = 2,
-		.iotype = SERIAL_IO_MEM,
-		.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
-	},
-	{
-		.membase = (void *)S6_REG_UART + 0x1000,
-		.mapbase = S6_REG_UART + 0x1000,
-		.irq = UART_INTNUM,
-		.uartclk = S6_SCLK,
-		.regshift = 2,
-		.iotype = SERIAL_IO_MEM,
-		.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct resource s6_gmac_resource[] = {
-	{
-		.name   = "mem",
-		.start  = (resource_size_t)S6_REG_GMAC,
-		.end    = (resource_size_t)S6_REG_GMAC + 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "dma",
-		.start  = (resource_size_t)
-			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX),
-		.end    = (resource_size_t)
-			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACTX) + 0x100 - 1,
-		.flags  = IORESOURCE_DMA,
-	},
-	{
-		.name   = "dma",
-		.start  = (resource_size_t)
-			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX),
-		.end    = (resource_size_t)
-			DMA_CHNL(S6_REG_HIFDMA, S6_HIFDMA_GMACRX) + 0x100 - 1,
-		.flags  = IORESOURCE_DMA,
-	},
-	{
-		.name   = "io",
-		.start  = (resource_size_t)S6_MEM_GMAC,
-		.end    = (resource_size_t)S6_MEM_GMAC + 0x2000000 - 1,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "irq",
-		.start  = (resource_size_t)GMAC_INTNUM,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.name   = "irq",
-		.start  = (resource_size_t)PHY_POLL,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static int __init prepare_phy_irq(int pin)
-{
-	int irq;
-	if (gpio_request(pin, "s6gmac_phy") < 0)
-		goto fail;
-	if (gpio_direction_input(pin) < 0)
-		goto free;
-	irq = gpio_to_irq(pin);
-	if (irq < 0)
-		goto free;
-	if (irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW) < 0)
-		goto free;
-	return irq;
-free:
-	gpio_free(pin);
-fail:
-	return PHY_POLL;
-}
-
-static struct platform_device platform_devices[] = {
-	{
-		.name = "serial8250",
-		.id = PLAT8250_DEV_PLATFORM,
-		.dev = {
-			.platform_data = serial_platform_data,
-		},
-	},
-	{
-		.name = "s6gmac",
-		.id = 0,
-		.resource = s6_gmac_resource,
-		.num_resources = ARRAY_SIZE(s6_gmac_resource),
-	},
-	{
-		I2C_BOARD_INFO("m41t62", S6I2C_ADDR_M41T62),
-	},
-};
-
-static int __init device_init(void)
-{
-	int i;
-
-	s6_gmac_resource[5].start = prepare_phy_irq(GPIO_PHY_IRQ);
-
-	for (i = 0; i < ARRAY_SIZE(platform_devices); i++)
-		platform_device_register(&platform_devices[i]);
-	return 0;
-}
-arch_initcall_sync(device_init);
diff --git a/arch/xtensa/platforms/s6105/include/platform/gpio.h b/arch/xtensa/platforms/s6105/include/platform/gpio.h
deleted file mode 100644
index fa11aa4..0000000
--- a/arch/xtensa/platforms/s6105/include/platform/gpio.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_XTENSA_S6105_GPIO_H
-#define __ASM_XTENSA_S6105_GPIO_H
-
-#define GPIO_BP_TEMP_ALARM	0
-#define GPIO_PB_RESET_IN	1
-#define GPIO_EXP_IRQ		2
-#define GPIO_TRIGGER_IRQ	3
-#define GPIO_RTC_IRQ		4
-#define GPIO_PHY_IRQ		5
-#define GPIO_IMAGER_RESET	6
-#define GPIO_SD_IRQ		7
-#define GPIO_MINI_BOOT_INH	8
-#define GPIO_BOARD_RESET	9
-#define GPIO_EXP_PRESENT	10
-#define GPIO_LED1_NGREEN	12
-#define GPIO_LED1_RED		13
-#define GPIO_LED0_NGREEN	14
-#define GPIO_LED0_NRED		15
-#define GPIO_SPI_CS0		16
-#define GPIO_SPI_CS1		17
-#define GPIO_SPI_CS3		19
-#define GPIO_SPI_CS4		20
-#define GPIO_SD_WP		21
-#define GPIO_BP_RESET		22
-#define GPIO_ALARM_OUT		23
-
-#endif /* __ASM_XTENSA_S6105_GPIO_H */
diff --git a/arch/xtensa/platforms/s6105/include/platform/hardware.h b/arch/xtensa/platforms/s6105/include/platform/hardware.h
deleted file mode 100644
index d628efa..0000000
--- a/arch/xtensa/platforms/s6105/include/platform/hardware.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __XTENSA_S6105_HARDWARE_H
-#define __XTENSA_S6105_HARDWARE_H
-
-#define PLATFORM_DEFAULT_MEM_START	0x40000000
-#define PLATFORM_DEFAULT_MEM_SIZE	0x08000000
-
-#define MAX_DMA_ADDRESS			0
-
-#define KERNELOFFSET			(PLATFORM_DEFAULT_MEM_START + 0x1000)
-
-#endif /* __XTENSA_S6105_HARDWARE_H */
diff --git a/arch/xtensa/platforms/s6105/include/platform/serial.h b/arch/xtensa/platforms/s6105/include/platform/serial.h
deleted file mode 100644
index c8a771e..0000000
--- a/arch/xtensa/platforms/s6105/include/platform/serial.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_XTENSA_S6105_SERIAL_H
-#define __ASM_XTENSA_S6105_SERIAL_H
-
-#include <variant/hardware.h>
-
-#define BASE_BAUD (S6_SCLK / 16)
-
-#endif /* __ASM_XTENSA_S6105_SERIAL_H */
diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c
deleted file mode 100644
index 86ce730..0000000
--- a/arch/xtensa/platforms/s6105/setup.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * s6105 control routines
- *
- * Copyright (c) 2009 emlix GmbH
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/bootparam.h>
-
-#include <variant/hardware.h>
-#include <variant/gpio.h>
-
-#include <platform/gpio.h>
-
-void platform_halt(void)
-{
-	local_irq_disable();
-	while (1)
-		;
-}
-
-void platform_power_off(void)
-{
-	platform_halt();
-}
-
-void platform_restart(void)
-{
-	platform_halt();
-}
-
-void __init platform_setup(char **cmdline)
-{
-	unsigned long reg;
-
-	reg = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL);
-	reg &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC |
-		S6_GREG1_PLLSEL_GMII_MASK << S6_GREG1_PLLSEL_GMII);
-	reg |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC |
-		S6_GREG1_PLLSEL_GMII_125MHZ << S6_GREG1_PLLSEL_GMII;
-	writel(reg, S6_REG_GREG1 + S6_GREG1_PLLSEL);
-
-	reg = readl(S6_REG_GREG1 + S6_GREG1_CLKGATE);
-	reg &= ~(1 << S6_GREG1_BLOCK_SB);
-	reg &= ~(1 << S6_GREG1_BLOCK_GMAC);
-	writel(reg, S6_REG_GREG1 + S6_GREG1_CLKGATE);
-
-	reg = readl(S6_REG_GREG1 + S6_GREG1_BLOCKENA);
-	reg |= 1 << S6_GREG1_BLOCK_SB;
-	reg |= 1 << S6_GREG1_BLOCK_GMAC;
-	writel(reg, S6_REG_GREG1 + S6_GREG1_BLOCKENA);
-
-	printk(KERN_NOTICE "S6105 on Stretch S6000 - "
-		"Copyright (C) 2009 emlix GmbH <info@emlix.com>\n");
-}
-
-void __init platform_init(bp_tag_t *first)
-{
-	s6_gpio_init(0);
-	gpio_request(GPIO_LED1_NGREEN, "led1_green");
-	gpio_request(GPIO_LED1_RED, "led1_red");
-	gpio_direction_output(GPIO_LED1_NGREEN, 1);
-}
-
-void platform_heartbeat(void)
-{
-	static unsigned int c;
-
-	if (!(++c & 0x4F))
-		gpio_direction_output(GPIO_LED1_RED, !(c & 0x10));
-}
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
index aeb316b..6edd20b 100644
--- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
+++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
@@ -17,8 +17,8 @@
 
 /* Memory configuration. */
 
-#define PLATFORM_DEFAULT_MEM_START 0x00000000
-#define PLATFORM_DEFAULT_MEM_SIZE  0x04000000
+#define PLATFORM_DEFAULT_MEM_START CONFIG_DEFAULT_MEM_START
+#define PLATFORM_DEFAULT_MEM_SIZE  CONFIG_DEFAULT_MEM_SIZE
 
 /* Interrupt configuration. */
 
diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile
deleted file mode 100644
index 3e7ef0a..0000000
--- a/arch/xtensa/variants/s6000/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# s6000 Makefile
-
-obj-y		+= irq.o gpio.o dmac.o
-obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT)	+= delay.o
diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c
deleted file mode 100644
index 3915456..0000000
--- a/arch/xtensa/variants/s6000/delay.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <asm/timex.h>
-#include <asm/io.h>
-#include <variant/hardware.h>
-
-#define LOOPS 10
-void platform_calibrate_ccount(void)
-{
-	u32 uninitialized_var(a);
-	u32 uninitialized_var(u);
-	u32 b;
-	u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
-	int i = LOOPS+1;
-	do {
-		u32 t = u;
-		asm volatile(
-		"1:	l32i %0, %2, 0 ;"
-		"	beq %0, %1, 1b ;"
-		: "=&a"(u) : "a"(t), "a"(tstamp));
-		b = get_ccount();
-		if (i == LOOPS)
-			a = b;
-	} while (--i >= 0);
-	b -= a;
-	ccount_freq = b * (100000UL / LOOPS);
-}
diff --git a/arch/xtensa/variants/s6000/dmac.c b/arch/xtensa/variants/s6000/dmac.c
deleted file mode 100644
index 340f5bb..0000000
--- a/arch/xtensa/variants/s6000/dmac.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Authors:	Oskar Schirmer <oskar@scara.com>
- *		Daniel Gloeckner <dg@emlix.com>
- * (c) 2008 emlix GmbH http://www.emlix.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <asm/cacheflush.h>
-#include <variant/dmac.h>
-
-/* DMA engine lookup */
-
-struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB];
-
-
-/* DMA control, per engine */
-
-void s6dmac_put_fifo_cache(u32 dmac, int chan, u32 src, u32 dst, u32 size)
-{
-	if (xtensa_need_flush_dma_source(src)) {
-		u32 base = src;
-		u32 span = size;
-		u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
-		if (chunk && (size > chunk)) {
-			s32 skip =
-				readl(DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP);
-			u32 gaps = (size+chunk-1)/chunk - 1;
-			if (skip >= 0) {
-				span += gaps * skip;
-			} else if (-skip > chunk) {
-				s32 decr = gaps * (chunk + skip);
-				base += decr;
-				span = chunk - decr;
-			} else {
-				span = max(span + gaps * skip,
-					(chunk + skip) * gaps - skip);
-			}
-		}
-		flush_dcache_unaligned(base, span);
-	}
-	if (xtensa_need_invalidate_dma_destination(dst)) {
-		u32 base = dst;
-		u32 span = size;
-		u32 chunk = readl(DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
-		if (chunk && (size > chunk)) {
-			s32 skip =
-				readl(DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP);
-			u32 gaps = (size+chunk-1)/chunk - 1;
-			if (skip >= 0) {
-				span += gaps * skip;
-			} else if (-skip > chunk) {
-				s32 decr = gaps * (chunk + skip);
-				base += decr;
-				span = chunk - decr;
-			} else {
-				span = max(span + gaps * skip,
-					(chunk + skip) * gaps - skip);
-			}
-		}
-		invalidate_dcache_unaligned(base, span);
-	}
-	s6dmac_put_fifo(dmac, chan, src, dst, size);
-}
-
-void s6dmac_disable_error_irqs(u32 dmac, u32 mask)
-{
-	unsigned long flags;
-	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
-	spin_lock_irqsave(spinl, flags);
-	_s6dmac_disable_error_irqs(dmac, mask);
-	spin_unlock_irqrestore(spinl, flags);
-}
-
-u32 s6dmac_int_sources(u32 dmac, u32 channel)
-{
-	u32 mask, ret, tmp;
-	mask = 1 << channel;
-
-	tmp = readl(dmac + S6_DMA_TERMCNTIRQSTAT);
-	tmp &= mask;
-	writel(tmp, dmac + S6_DMA_TERMCNTIRQCLR);
-	ret = tmp >> channel;
-
-	tmp = readl(dmac + S6_DMA_PENDCNTIRQSTAT);
-	tmp &= mask;
-	writel(tmp, dmac + S6_DMA_PENDCNTIRQCLR);
-	ret |= (tmp >> channel) << 1;
-
-	tmp = readl(dmac + S6_DMA_LOWWMRKIRQSTAT);
-	tmp &= mask;
-	writel(tmp, dmac + S6_DMA_LOWWMRKIRQCLR);
-	ret |= (tmp >> channel) << 2;
-
-	tmp = readl(dmac + S6_DMA_INTRAW0);
-	tmp &= (mask << S6_DMA_INT0_OVER) | (mask << S6_DMA_INT0_UNDER);
-	writel(tmp, dmac + S6_DMA_INTCLEAR0);
-
-	if (tmp & (mask << S6_DMA_INT0_UNDER))
-		ret |= 1 << 3;
-	if (tmp & (mask << S6_DMA_INT0_OVER))
-		ret |= 1 << 4;
-
-	tmp = readl(dmac + S6_DMA_MASTERERRINFO);
-	mask <<= S6_DMA_INT1_CHANNEL;
-	if (((tmp >> S6_DMA_MASTERERR_CHAN(0)) & S6_DMA_MASTERERR_CHAN_MASK)
-			== channel)
-		mask |= 1 << S6_DMA_INT1_MASTER;
-	if (((tmp >> S6_DMA_MASTERERR_CHAN(1)) & S6_DMA_MASTERERR_CHAN_MASK)
-			== channel)
-		mask |= 1 << (S6_DMA_INT1_MASTER + 1);
-	if (((tmp >> S6_DMA_MASTERERR_CHAN(2)) & S6_DMA_MASTERERR_CHAN_MASK)
-			== channel)
-		mask |= 1 << (S6_DMA_INT1_MASTER + 2);
-
-	tmp = readl(dmac + S6_DMA_INTRAW1) & mask;
-	writel(tmp, dmac + S6_DMA_INTCLEAR1);
-	ret |= ((tmp >> channel) & 1) << 5;
-	ret |= ((tmp >> S6_DMA_INT1_MASTER) & S6_DMA_INT1_MASTER_MASK) << 6;
-
-	return ret;
-}
-
-void s6dmac_release_chan(u32 dmac, int chan)
-{
-	if (chan >= 0)
-		s6dmac_disable_chan(dmac, chan);
-}
-
-
-/* global init */
-
-static inline void __init dmac_init(u32 dmac, u8 chan_nb)
-{
-	s6dmac_ctrl[S6_DMAC_INDEX(dmac)].dmac = dmac;
-	spin_lock_init(&s6dmac_ctrl[S6_DMAC_INDEX(dmac)].lock);
-	s6dmac_ctrl[S6_DMAC_INDEX(dmac)].chan_nb = chan_nb;
-	writel(S6_DMA_INT1_MASTER_MASK << S6_DMA_INT1_MASTER,
-		dmac + S6_DMA_INTCLEAR1);
-}
-
-static inline void __init dmac_master(u32 dmac,
-	u32 m0start, u32 m0end, u32 m1start, u32 m1end)
-{
-	writel(m0start, dmac + S6_DMA_MASTER0START);
-	writel(m0end - 1, dmac + S6_DMA_MASTER0END);
-	writel(m1start, dmac + S6_DMA_MASTER1START);
-	writel(m1end - 1, dmac + S6_DMA_MASTER1END);
-}
-
-static void __init s6_dmac_init(void)
-{
-	dmac_init(S6_REG_LMSDMA, S6_LMSDMA_NB);
-	dmac_master(S6_REG_LMSDMA,
-		S6_MEM_DDR, S6_MEM_PCIE_APER, S6_MEM_EFI, S6_MEM_GMAC);
-	dmac_init(S6_REG_NIDMA, S6_NIDMA_NB);
-	dmac_init(S6_REG_DPDMA, S6_DPDMA_NB);
-	dmac_master(S6_REG_DPDMA,
-		S6_MEM_DDR, S6_MEM_PCIE_APER, S6_REG_DP, S6_REG_DPDMA);
-	dmac_init(S6_REG_HIFDMA, S6_HIFDMA_NB);
-	dmac_master(S6_REG_HIFDMA,
-		S6_MEM_GMAC, S6_MEM_PCIE_CFG, S6_MEM_PCIE_APER, S6_MEM_AUX);
-}
-
-arch_initcall(s6_dmac_init);
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
deleted file mode 100644
index da9e85c..0000000
--- a/arch/xtensa/variants/s6000/gpio.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * s6000 gpio driver
- *
- * Copyright (c) 2009 emlix GmbH
- * Authors:	Oskar Schirmer <oskar@scara.com>
- *		Johannes Weiner <hannes@cmpxchg.org>
- *		Daniel Gloeckner <dg@emlix.com>
- */
-#include <linux/bitops.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <variant/hardware.h>
-
-#define IRQ_BASE XTENSA_NR_IRQS
-
-#define S6_GPIO_DATA		0x000
-#define S6_GPIO_IS		0x404
-#define S6_GPIO_IBE		0x408
-#define S6_GPIO_IEV		0x40C
-#define S6_GPIO_IE		0x410
-#define S6_GPIO_RIS		0x414
-#define S6_GPIO_MIS		0x418
-#define S6_GPIO_IC		0x41C
-#define S6_GPIO_AFSEL		0x420
-#define S6_GPIO_DIR		0x800
-#define S6_GPIO_BANK(nr)	((nr) * 0x1000)
-#define S6_GPIO_MASK(nr)	(4 << (nr))
-#define S6_GPIO_OFFSET(nr) \
-		(S6_GPIO_BANK((nr) >> 3) + S6_GPIO_MASK((nr) & 7))
-
-static int direction_input(struct gpio_chip *chip, unsigned int off)
-{
-	writeb(0, S6_REG_GPIO + S6_GPIO_DIR + S6_GPIO_OFFSET(off));
-	return 0;
-}
-
-static int get(struct gpio_chip *chip, unsigned int off)
-{
-	return readb(S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off));
-}
-
-static int direction_output(struct gpio_chip *chip, unsigned int off, int val)
-{
-	unsigned rel = S6_GPIO_OFFSET(off);
-	writeb(~0, S6_REG_GPIO + S6_GPIO_DIR + rel);
-	writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + rel);
-	return 0;
-}
-
-static void set(struct gpio_chip *chip, unsigned int off, int val)
-{
-	writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off));
-}
-
-static int to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 8)
-		return offset + IRQ_BASE;
-	return -EINVAL;
-}
-
-static struct gpio_chip gpiochip = {
-	.owner = THIS_MODULE,
-	.direction_input = direction_input,
-	.get = get,
-	.direction_output = direction_output,
-	.set = set,
-	.to_irq = to_irq,
-	.base = 0,
-	.ngpio = 24,
-	.can_sleep = 0, /* no blocking io needed */
-	.exported = 0, /* no exporting to userspace */
-};
-
-int s6_gpio_init(u32 afsel)
-{
-	writeb(afsel, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL);
-	writeb(afsel >> 8, S6_REG_GPIO + S6_GPIO_BANK(1) + S6_GPIO_AFSEL);
-	writeb(afsel >> 16, S6_REG_GPIO + S6_GPIO_BANK(2) + S6_GPIO_AFSEL);
-	return gpiochip_add(&gpiochip);
-}
-
-static void ack(struct irq_data *d)
-{
-	writeb(1 << (d->irq - IRQ_BASE), S6_REG_GPIO + S6_GPIO_IC);
-}
-
-static void mask(struct irq_data *d)
-{
-	u8 r = readb(S6_REG_GPIO + S6_GPIO_IE);
-	r &= ~(1 << (d->irq - IRQ_BASE));
-	writeb(r, S6_REG_GPIO + S6_GPIO_IE);
-}
-
-static void unmask(struct irq_data *d)
-{
-	u8 m = readb(S6_REG_GPIO + S6_GPIO_IE);
-	m |= 1 << (d->irq - IRQ_BASE);
-	writeb(m, S6_REG_GPIO + S6_GPIO_IE);
-}
-
-static int set_type(struct irq_data *d, unsigned int type)
-{
-	const u8 m = 1 << (d->irq - IRQ_BASE);
-	irq_flow_handler_t handler;
-	u8 reg;
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_AFSEL) & m)
-		    || (readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE) & m)
-		    || readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_DIR
-			      + S6_GPIO_MASK(irq - IRQ_BASE)))
-			return 0;
-		type = IRQ_TYPE_EDGE_BOTH;
-	}
-
-	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS);
-	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
-		reg |= m;
-		handler = handle_level_irq;
-	} else {
-		reg &= ~m;
-		handler = handle_edge_irq;
-	}
-	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS);
-	__irq_set_handler_locked(irq, handler);
-
-	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV);
-	if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING))
-		reg |= m;
-	else
-		reg &= ~m;
-	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV);
-
-	reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE);
-	if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
-		reg |= m;
-	else
-		reg &= ~m;
-	writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IBE);
-	return 0;
-}
-
-static struct irq_chip gpioirqs = {
-	.name = "GPIO",
-	.irq_ack = ack,
-	.irq_mask = mask,
-	.irq_unmask = unmask,
-	.irq_set_type = set_type,
-};
-
-static u8 demux_masks[4];
-
-static void demux_irqs(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	u8 *mask = irq_desc_get_handler_data(desc);
-	u8 pending;
-	int cirq;
-
-	chip->irq_mask(&desc->irq_data);
-	chip->irq_ack(&desc->irq_data);
-	pending = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_MIS) & *mask;
-	cirq = IRQ_BASE - 1;
-	while (pending) {
-		int n = ffs(pending);
-		cirq += n;
-		pending >>= n;
-		generic_handle_irq(cirq);
-	}
-	chip->irq_unmask(&desc->irq_data);
-}
-
-extern const signed char *platform_irq_mappings[XTENSA_NR_IRQS];
-
-void __init variant_init_irq(void)
-{
-	int irq, n;
-	writeb(0, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IE);
-	for (irq = n = 0; irq < XTENSA_NR_IRQS; irq++) {
-		const signed char *mapping = platform_irq_mappings[irq];
-		int alone = 1;
-		u8 mask;
-		if (!mapping)
-			continue;
-		for(mask = 0; *mapping != -1; mapping++)
-			switch (*mapping) {
-			case S6_INTC_GPIO(0):
-				mask |= 1 << 0;
-				break;
-			case S6_INTC_GPIO(1):
-				mask |= 1 << 1;
-				break;
-			case S6_INTC_GPIO(2):
-				mask |= 1 << 2;
-				break;
-			case S6_INTC_GPIO(3):
-				mask |= 0x1f << 3;
-				break;
-			default:
-				alone = 0;
-			}
-		if (mask) {
-			int cirq, i;
-			if (!alone) {
-				printk(KERN_ERR "chained irq chips can't share"
-					" parent irq %i\n", irq);
-				continue;
-			}
-			demux_masks[n] = mask;
-			cirq = IRQ_BASE - 1;
-			do {
-				i = ffs(mask);
-				cirq += i;
-				mask >>= i;
-				irq_set_chip(cirq, &gpioirqs);
-				irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
-			} while (mask);
-			irq_set_handler_data(irq, demux_masks + n);
-			irq_set_chained_handler(irq, demux_irqs);
-			if (++n == ARRAY_SIZE(demux_masks))
-				break;
-		}
-	}
-}
diff --git a/arch/xtensa/variants/s6000/include/variant/core.h b/arch/xtensa/variants/s6000/include/variant/core.h
deleted file mode 100644
index af00795..0000000
--- a/arch/xtensa/variants/s6000/include/variant/core.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * Xtensa processor core configuration information.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 1999-2008 Tensilica Inc.
- */
-
-#ifndef _XTENSA_CORE_CONFIGURATION_H
-#define _XTENSA_CORE_CONFIGURATION_H
-
-
-/****************************************************************************
-	    Parameters Useful for Any Code, USER or PRIVILEGED
- ****************************************************************************/
-
-/*
- *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
- *  configured, and a value of 0 otherwise.  These macros are always defined.
- */
-
-
-/*----------------------------------------------------------------------
-				ISA
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
-#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
-#define XCHAL_NUM_AREGS			64	/* num of physical addr regs */
-#define XCHAL_NUM_AREGS_LOG2		6	/* log2(XCHAL_NUM_AREGS) */
-#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
-#define XCHAL_HAVE_DEBUG		1	/* debug option */
-#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
-#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
-#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
-#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
-#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
-#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
-#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
-#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
-#define XCHAL_HAVE_MUL32_HIGH		1	/* MULUH/MULSH instructions */
-#define XCHAL_HAVE_DIV32		0	/* QUOS/QUOU/REMS/REMU instructions */
-#define XCHAL_HAVE_L32R			1	/* L32R instruction */
-#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
-#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
-#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
-#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
-#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
-#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
-#define XCHAL_HAVE_ABS			1	/* ABS instruction */
-/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
-/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
-#define XCHAL_HAVE_RELEASE_SYNC		0	/* L32AI/S32RI instructions */
-#define XCHAL_HAVE_S32C1I		0	/* S32C1I instruction */
-#define XCHAL_HAVE_SPECULATION		0	/* speculation */
-#define XCHAL_HAVE_FULL_RESET		0	/* all regs/state reset */
-#define XCHAL_NUM_CONTEXTS		1	/* */
-#define XCHAL_NUM_MISC_REGS		4	/* num of scratch regs (0..4) */
-#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
-#define XCHAL_HAVE_PRID			0	/* processor ID register */
-#define XCHAL_HAVE_THREADPTR		0	/* THREADPTR register */
-#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
-#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
-#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
-#define XCHAL_HAVE_MAC16		0	/* MAC16 package */
-#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
-#define XCHAL_HAVE_FP			1	/* floating point pkg */
-#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
-#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
-#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
-
-
-/*----------------------------------------------------------------------
-				MISC
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
-#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
-#define XCHAL_DATA_WIDTH		16	/* data width in bytes */
-/*  In T1050, applies to selected core load and store instructions (see ISA): */
-#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
-#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
-
-#define XCHAL_SW_VERSION		701001	/* sw version of this header */
-
-#define XCHAL_CORE_ID			"stretch_bali"	/* alphanum core name
-						   (CoreID) set in the Xtensa
-						   Processor Generator */
-
-#define XCHAL_BUILD_UNIQUE_ID		0x000104B9	/* 22-bit sw build ID */
-
-/*
- *  These definitions describe the hardware targeted by this software.
- */
-#define XCHAL_HW_CONFIGID0		0xC2F3F9FE	/* ConfigID hi 32 bits*/
-#define XCHAL_HW_CONFIGID1		0x054104B9	/* ConfigID lo 32 bits*/
-#define XCHAL_HW_VERSION_NAME		"LX1.0.2"	/* full version name */
-#define XCHAL_HW_VERSION_MAJOR		2100	/* major ver# of targeted hw */
-#define XCHAL_HW_VERSION_MINOR		2	/* minor ver# of targeted hw */
-#define XCHAL_HW_VERSION		210002	/* major*100+minor */
-#define XCHAL_HW_REL_LX1		1
-#define XCHAL_HW_REL_LX1_0		1
-#define XCHAL_HW_REL_LX1_0_2		1
-#define XCHAL_HW_CONFIGID_RELIABLE	1
-/*  If software targets a *range* of hardware versions, these are the bounds: */
-#define XCHAL_HW_MIN_VERSION_MAJOR	2100	/* major v of earliest tgt hw */
-#define XCHAL_HW_MIN_VERSION_MINOR	2	/* minor v of earliest tgt hw */
-#define XCHAL_HW_MIN_VERSION		210002	/* earliest targeted hw */
-#define XCHAL_HW_MAX_VERSION_MAJOR	2100	/* major v of latest tgt hw */
-#define XCHAL_HW_MAX_VERSION_MINOR	2	/* minor v of latest tgt hw */
-#define XCHAL_HW_MAX_VERSION		210002	/* latest targeted hw */
-
-
-/*----------------------------------------------------------------------
-				CACHE
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_ICACHE_LINESIZE		16	/* I-cache line size in bytes */
-#define XCHAL_DCACHE_LINESIZE		16	/* D-cache line size in bytes */
-#define XCHAL_ICACHE_LINEWIDTH		4	/* log2(I line size in bytes) */
-#define XCHAL_DCACHE_LINEWIDTH		4	/* log2(D line size in bytes) */
-
-#define XCHAL_ICACHE_SIZE		32768	/* I-cache size in bytes or 0 */
-#define XCHAL_DCACHE_SIZE		32768	/* D-cache size in bytes or 0 */
-
-#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
-
-
-
-
-/****************************************************************************
-    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
- ****************************************************************************/
-
-
-#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
-
-/*----------------------------------------------------------------------
-				CACHE
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
-
-/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
-
-/*  Number of cache sets in log2(lines per way):  */
-#define XCHAL_ICACHE_SETWIDTH		9
-#define XCHAL_DCACHE_SETWIDTH		10
-
-/*  Cache set associativity (number of ways):  */
-#define XCHAL_ICACHE_WAYS		4
-#define XCHAL_DCACHE_WAYS		2
-
-/*  Cache features:  */
-#define XCHAL_ICACHE_LINE_LOCKABLE	1
-#define XCHAL_DCACHE_LINE_LOCKABLE	0
-#define XCHAL_ICACHE_ECC_PARITY		0
-#define XCHAL_DCACHE_ECC_PARITY		0
-
-/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
-#define XCHAL_CA_BITS			4
-
-
-/*----------------------------------------------------------------------
-			INTERNAL I/D RAM/ROMs and XLMI
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
-#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
-#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
-#define XCHAL_NUM_DATARAM		1	/* number of core data RAMs */
-#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
-#define XCHAL_NUM_XLMI			1	/* number of core XLMI ports */
-
-/*  Data RAM 0:  */
-#define XCHAL_DATARAM0_VADDR		0x3FFF0000
-#define XCHAL_DATARAM0_PADDR		0x3FFF0000
-#define XCHAL_DATARAM0_SIZE		65536
-#define XCHAL_DATARAM0_ECC_PARITY	0
-
-/*  XLMI Port 0:  */
-#define XCHAL_XLMI0_VADDR		0x37F80000
-#define XCHAL_XLMI0_PADDR		0x37F80000
-#define XCHAL_XLMI0_SIZE		262144
-#define XCHAL_XLMI0_ECC_PARITY	0
-
-
-/*----------------------------------------------------------------------
-			INTERRUPTS and TIMERS
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
-#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
-#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
-#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
-#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
-#define XCHAL_NUM_INTERRUPTS		27	/* number of interrupts */
-#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
-#define XCHAL_NUM_EXTINTERRUPTS		20	/* num of external interrupts */
-#define XCHAL_NUM_INTLEVELS		4	/* number of interrupt levels
-						   (not including level zero) */
-#define XCHAL_EXCM_LEVEL		1	/* level masked by PS.EXCM */
-	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
-
-/*  Masks of interrupts at each interrupt level:  */
-#define XCHAL_INTLEVEL1_MASK		0x01F07FFF
-#define XCHAL_INTLEVEL2_MASK		0x02018000
-#define XCHAL_INTLEVEL3_MASK		0x04060000
-#define XCHAL_INTLEVEL4_MASK		0x00000000
-#define XCHAL_INTLEVEL5_MASK		0x00080000
-#define XCHAL_INTLEVEL6_MASK		0x00000000
-#define XCHAL_INTLEVEL7_MASK		0x00000000
-
-/*  Masks of interrupts at each range 1..n of interrupt levels:  */
-#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x01F07FFF
-#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x03F1FFFF
-#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x07F7FFFF
-#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x07F7FFFF
-#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x07FFFFFF
-#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x07FFFFFF
-#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x07FFFFFF
-
-/*  Level of each interrupt:  */
-#define XCHAL_INT0_LEVEL		1
-#define XCHAL_INT1_LEVEL		1
-#define XCHAL_INT2_LEVEL		1
-#define XCHAL_INT3_LEVEL		1
-#define XCHAL_INT4_LEVEL		1
-#define XCHAL_INT5_LEVEL		1
-#define XCHAL_INT6_LEVEL		1
-#define XCHAL_INT7_LEVEL		1
-#define XCHAL_INT8_LEVEL		1
-#define XCHAL_INT9_LEVEL		1
-#define XCHAL_INT10_LEVEL		1
-#define XCHAL_INT11_LEVEL		1
-#define XCHAL_INT12_LEVEL		1
-#define XCHAL_INT13_LEVEL		1
-#define XCHAL_INT14_LEVEL		1
-#define XCHAL_INT15_LEVEL		2
-#define XCHAL_INT16_LEVEL		2
-#define XCHAL_INT17_LEVEL		3
-#define XCHAL_INT18_LEVEL		3
-#define XCHAL_INT19_LEVEL		5
-#define XCHAL_INT20_LEVEL		1
-#define XCHAL_INT21_LEVEL		1
-#define XCHAL_INT22_LEVEL		1
-#define XCHAL_INT23_LEVEL		1
-#define XCHAL_INT24_LEVEL		1
-#define XCHAL_INT25_LEVEL		2
-#define XCHAL_INT26_LEVEL		3
-#define XCHAL_DEBUGLEVEL		4	/* debug interrupt level */
-#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
-#define XCHAL_NMILEVEL			5	/* NMI "level" (for use with
-						   EXCSAVE/EPS/EPC_n, RFI n) */
-
-/*  Type of each interrupt:  */
-#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
-#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_NMI
-#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT22_TYPE 	XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT23_TYPE 	XTHAL_INTTYPE_SOFTWARE
-#define XCHAL_INT24_TYPE 	XTHAL_INTTYPE_TIMER
-#define XCHAL_INT25_TYPE 	XTHAL_INTTYPE_TIMER
-#define XCHAL_INT26_TYPE 	XTHAL_INTTYPE_TIMER
-
-/*  Masks of interrupts for each type of interrupt:  */
-#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xF8000000
-#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00F00000
-#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x00000000
-#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0007FFFF
-#define XCHAL_INTTYPE_MASK_TIMER	0x07000000
-#define XCHAL_INTTYPE_MASK_NMI		0x00080000
-#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
-
-/*  Interrupt numbers assigned to specific interrupt sources:  */
-#define XCHAL_TIMER0_INTERRUPT		24	/* CCOMPARE0 */
-#define XCHAL_TIMER1_INTERRUPT		25	/* CCOMPARE1 */
-#define XCHAL_TIMER2_INTERRUPT		26	/* CCOMPARE2 */
-#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
-#define XCHAL_NMI_INTERRUPT		19	/* non-maskable interrupt */
-
-/*  Interrupt numbers for levels at which only one interrupt is configured:  */
-#define XCHAL_INTLEVEL5_NUM		19
-/*  (There are many interrupts each at level(s) 1, 2, 3.)  */
-
-
-/*
- *  External interrupt vectors/levels.
- *  These macros describe how Xtensa processor interrupt numbers
- *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
- *  map to external BInterrupt<n> pins, for those interrupts
- *  configured as external (level-triggered, edge-triggered, or NMI).
- *  See the Xtensa processor databook for more details.
- */
-
-/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
-#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
-#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
-#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
-#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
-#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
-#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
-#define XCHAL_EXTINT6_NUM		6	/* (intlevel 1) */
-#define XCHAL_EXTINT7_NUM		7	/* (intlevel 1) */
-#define XCHAL_EXTINT8_NUM		8	/* (intlevel 1) */
-#define XCHAL_EXTINT9_NUM		9	/* (intlevel 1) */
-#define XCHAL_EXTINT10_NUM		10	/* (intlevel 1) */
-#define XCHAL_EXTINT11_NUM		11	/* (intlevel 1) */
-#define XCHAL_EXTINT12_NUM		12	/* (intlevel 1) */
-#define XCHAL_EXTINT13_NUM		13	/* (intlevel 1) */
-#define XCHAL_EXTINT14_NUM		14	/* (intlevel 1) */
-#define XCHAL_EXTINT15_NUM		15	/* (intlevel 2) */
-#define XCHAL_EXTINT16_NUM		16	/* (intlevel 2) */
-#define XCHAL_EXTINT17_NUM		17	/* (intlevel 3) */
-#define XCHAL_EXTINT18_NUM		18	/* (intlevel 3) */
-#define XCHAL_EXTINT19_NUM		19	/* (intlevel 5) */
-
-
-/*----------------------------------------------------------------------
-			EXCEPTIONS and VECTORS
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
-						   number: 1 == XEA1 (old)
-							   2 == XEA2 (new)
-							   0 == XEAX (extern) */
-#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
-#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
-#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
-#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
-#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
-#define XCHAL_HAVE_VECTOR_SELECT	0	/* relocatable vectors */
-#define XCHAL_HAVE_VECBASE		0	/* relocatable vectors */
-
-#define XCHAL_RESET_VECOFS		0x00000000
-#define XCHAL_RESET_VECTOR_VADDR	0x3FFE03D0
-#define XCHAL_RESET_VECTOR_PADDR	0x3FFE03D0
-#define XCHAL_USER_VECOFS		0x00000000
-#define XCHAL_USER_VECTOR_VADDR		0x40000220
-#define XCHAL_USER_VECTOR_PADDR		0x40000220
-#define XCHAL_KERNEL_VECOFS		0x00000000
-#define XCHAL_KERNEL_VECTOR_VADDR	0x40000200
-#define XCHAL_KERNEL_VECTOR_PADDR	0x40000200
-#define XCHAL_DOUBLEEXC_VECOFS		0x00000000
-#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x400002A0
-#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x400002A0
-#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
-#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
-#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
-#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
-#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
-#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
-#define XCHAL_WINDOW_VECTORS_VADDR	0x40000000
-#define XCHAL_WINDOW_VECTORS_PADDR	0x40000000
-#define XCHAL_INTLEVEL2_VECOFS		0x00000000
-#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x40000240
-#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x40000240
-#define XCHAL_INTLEVEL3_VECOFS		0x00000000
-#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x40000260
-#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x40000260
-#define XCHAL_INTLEVEL4_VECOFS		0x00000000
-#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x40000390
-#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x40000390
-#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL4_VECOFS
-#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL4_VECTOR_VADDR
-#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL4_VECTOR_PADDR
-#define XCHAL_NMI_VECOFS		0x00000000
-#define XCHAL_NMI_VECTOR_VADDR		0x400003B0
-#define XCHAL_NMI_VECTOR_PADDR		0x400003B0
-#define XCHAL_INTLEVEL5_VECOFS		XCHAL_NMI_VECOFS
-#define XCHAL_INTLEVEL5_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
-#define XCHAL_INTLEVEL5_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
-
-
-/*----------------------------------------------------------------------
-				DEBUG
-  ----------------------------------------------------------------------*/
-
-#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
-#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
-#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
-#define XCHAL_HAVE_OCD_DIR_ARRAY	1	/* faster OCD option */
-
-
-/*----------------------------------------------------------------------
-				MMU
-  ----------------------------------------------------------------------*/
-
-/*  See core-matmap.h header file for more details.  */
-
-#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
-#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
-#define XCHAL_HAVE_IDENTITY_MAP		1	/* vaddr == paddr always */
-#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
-#define XCHAL_HAVE_MIMIC_CACHEATTR	1	/* region protection */
-#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
-#define XCHAL_HAVE_PTP_MMU		0	/* full MMU (with page table
-						   [autorefill] and protection)
-						   usable for an MMU-based OS */
-/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
-
-#define XCHAL_MMU_ASID_BITS		0	/* number of bits in ASIDs */
-#define XCHAL_MMU_RINGS			1	/* number of rings (1..4) */
-#define XCHAL_MMU_RING_BITS		0	/* num of bits in RING field */
-
-#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
-
-
-#endif /* _XTENSA_CORE_CONFIGURATION_H */
-
diff --git a/arch/xtensa/variants/s6000/include/variant/dmac.h b/arch/xtensa/variants/s6000/include/variant/dmac.h
deleted file mode 100644
index 3f88d9f..0000000
--- a/arch/xtensa/variants/s6000/include/variant/dmac.h
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * include/asm-xtensa/variant-s6000/dmac.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Tensilica Inc.
- * Copyright (C) 2008 Emlix GmbH <info@emlix.com>
- * Authors:	Fabian Godehardt <fg@emlix.com>
- *		Oskar Schirmer <oskar@scara.com>
- *		Daniel Gloeckner <dg@emlix.com>
- */
-
-#ifndef __ASM_XTENSA_S6000_DMAC_H
-#define __ASM_XTENSA_S6000_DMAC_H
-#include <linux/io.h>
-#include <variant/hardware.h>
-
-/* DMA global */
-
-#define S6_DMA_INTSTAT0		0x000
-#define S6_DMA_INTSTAT1		0x004
-#define S6_DMA_INTENABLE0	0x008
-#define S6_DMA_INTENABLE1	0x00C
-#define S6_DMA_INTRAW0		0x010
-#define S6_DMA_INTRAW1		0x014
-#define S6_DMA_INTCLEAR0	0x018
-#define S6_DMA_INTCLEAR1	0x01C
-#define S6_DMA_INTSET0		0x020
-#define S6_DMA_INTSET1		0x024
-#define S6_DMA_INT0_UNDER		0
-#define S6_DMA_INT0_OVER		16
-#define S6_DMA_INT1_CHANNEL		0
-#define S6_DMA_INT1_MASTER		16
-#define S6_DMA_INT1_MASTER_MASK			7
-#define S6_DMA_TERMCNTIRQSTAT	0x028
-#define S6_DMA_TERMCNTIRQCLR	0x02C
-#define S6_DMA_TERMCNTIRQSET	0x030
-#define S6_DMA_PENDCNTIRQSTAT	0x034
-#define S6_DMA_PENDCNTIRQCLR	0x038
-#define S6_DMA_PENDCNTIRQSET	0x03C
-#define S6_DMA_LOWWMRKIRQSTAT	0x040
-#define S6_DMA_LOWWMRKIRQCLR	0x044
-#define S6_DMA_LOWWMRKIRQSET	0x048
-#define S6_DMA_MASTERERRINFO	0x04C
-#define S6_DMA_MASTERERR_CHAN(n)	(4*(n))
-#define S6_DMA_MASTERERR_CHAN_MASK		0xF
-#define S6_DMA_DESCRFIFO0	0x050
-#define S6_DMA_DESCRFIFO1	0x054
-#define S6_DMA_DESCRFIFO2	0x058
-#define S6_DMA_DESCRFIFO2_AUTODISABLE	24
-#define S6_DMA_DESCRFIFO3	0x05C
-#define S6_DMA_MASTER0START	0x060
-#define S6_DMA_MASTER0END	0x064
-#define S6_DMA_MASTER1START	0x068
-#define S6_DMA_MASTER1END	0x06C
-#define S6_DMA_NEXTFREE		0x070
-#define S6_DMA_NEXTFREE_CHAN		0
-#define S6_DMA_NEXTFREE_CHAN_MASK	0x1F
-#define S6_DMA_NEXTFREE_ENA		16
-#define S6_DMA_NEXTFREE_ENA_MASK	((1 << 16) - 1)
-#define S6_DMA_DPORTCTRLGRP(p)	((p) * 4 + 0x074)
-#define S6_DMA_DPORTCTRLGRP_FRAMEREP	0
-#define S6_DMA_DPORTCTRLGRP_NRCHANS	1
-#define S6_DMA_DPORTCTRLGRP_NRCHANS_1		0
-#define S6_DMA_DPORTCTRLGRP_NRCHANS_3		1
-#define S6_DMA_DPORTCTRLGRP_NRCHANS_4		2
-#define S6_DMA_DPORTCTRLGRP_NRCHANS_2		3
-#define S6_DMA_DPORTCTRLGRP_ENA		31
-
-
-/* DMA per channel */
-
-#define DMA_CHNL(dmac, n)	((dmac) + 0x1000 + (n) * 0x100)
-#define DMA_INDEX_CHNL(addr)	(((addr) >> 8) & 0xF)
-#define DMA_MASK_DMAC(addr)	((addr) & 0xFFFF0000)
-#define S6_DMA_CHNCTRL		0x000
-#define S6_DMA_CHNCTRL_ENABLE		0
-#define S6_DMA_CHNCTRL_PAUSE		1
-#define S6_DMA_CHNCTRL_PRIO		2
-#define S6_DMA_CHNCTRL_PRIO_MASK		3
-#define S6_DMA_CHNCTRL_PERIPHXFER	4
-#define S6_DMA_CHNCTRL_PERIPHENA	5
-#define S6_DMA_CHNCTRL_SRCINC		6
-#define S6_DMA_CHNCTRL_DSTINC		7
-#define S6_DMA_CHNCTRL_BURSTLOG		8
-#define S6_DMA_CHNCTRL_BURSTLOG_MASK		7
-#define S6_DMA_CHNCTRL_DESCFIFODEPTH	12
-#define S6_DMA_CHNCTRL_DESCFIFODEPTH_MASK	0x1F
-#define S6_DMA_CHNCTRL_DESCFIFOFULL	17
-#define S6_DMA_CHNCTRL_BWCONSEL		18
-#define S6_DMA_CHNCTRL_BWCONENA		19
-#define S6_DMA_CHNCTRL_PENDGCNTSTAT	20
-#define S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK	0x3F
-#define S6_DMA_CHNCTRL_LOWWMARK		26
-#define S6_DMA_CHNCTRL_LOWWMARK_MASK		0xF
-#define S6_DMA_CHNCTRL_TSTAMP		30
-#define S6_DMA_TERMCNTNB	0x004
-#define S6_DMA_TERMCNTNB_MASK			0xFFFF
-#define S6_DMA_TERMCNTTMO	0x008
-#define S6_DMA_TERMCNTSTAT	0x00C
-#define S6_DMA_TERMCNTSTAT_MASK		0xFF
-#define S6_DMA_CMONCHUNK	0x010
-#define S6_DMA_SRCSKIP		0x014
-#define S6_DMA_DSTSKIP		0x018
-#define S6_DMA_CUR_SRC		0x024
-#define S6_DMA_CUR_DST		0x028
-#define S6_DMA_TIMESTAMP	0x030
-
-/* DMA channel lists */
-
-#define S6_DPDMA_CHAN(stream, channel)	(4 * (stream) + (channel))
-#define S6_DPDMA_NB	16
-
-#define S6_HIFDMA_GMACTX	0
-#define S6_HIFDMA_GMACRX	1
-#define S6_HIFDMA_I2S0		2
-#define S6_HIFDMA_I2S1		3
-#define S6_HIFDMA_EGIB		4
-#define S6_HIFDMA_PCITX		5
-#define S6_HIFDMA_PCIRX		6
-#define S6_HIFDMA_NB	7
-
-#define S6_NIDMA_NB	4
-
-#define S6_LMSDMA_NB	12
-
-/* controller access */
-
-#define S6_DMAC_NB	4
-#define S6_DMAC_INDEX(dmac)	(((unsigned)(dmac) >> 18) % S6_DMAC_NB)
-
-struct s6dmac_ctrl {
-	u32 dmac;
-	spinlock_t lock;
-	u8 chan_nb;
-};
-
-extern struct s6dmac_ctrl s6dmac_ctrl[S6_DMAC_NB];
-
-
-/* DMA control, per channel */
-
-static inline int s6dmac_fifo_full(u32 dmac, int chan)
-{
-	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
-		& (1 << S6_DMA_CHNCTRL_DESCFIFOFULL)) && 1;
-}
-
-static inline int s6dmac_termcnt_irq(u32 dmac, int chan)
-{
-	u32 m = 1 << chan;
-	int r = (readl(dmac + S6_DMA_TERMCNTIRQSTAT) & m) && 1;
-	if (r)
-		writel(m, dmac + S6_DMA_TERMCNTIRQCLR);
-	return r;
-}
-
-static inline int s6dmac_pendcnt_irq(u32 dmac, int chan)
-{
-	u32 m = 1 << chan;
-	int r = (readl(dmac + S6_DMA_PENDCNTIRQSTAT) & m) && 1;
-	if (r)
-		writel(m, dmac + S6_DMA_PENDCNTIRQCLR);
-	return r;
-}
-
-static inline int s6dmac_lowwmark_irq(u32 dmac, int chan)
-{
-	int r = (readl(dmac + S6_DMA_LOWWMRKIRQSTAT) & (1 << chan)) ? 1 : 0;
-	if (r)
-		writel(1 << chan, dmac + S6_DMA_LOWWMRKIRQCLR);
-	return r;
-}
-
-static inline u32 s6dmac_pending_count(u32 dmac, int chan)
-{
-	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
-			>> S6_DMA_CHNCTRL_PENDGCNTSTAT)
-		& S6_DMA_CHNCTRL_PENDGCNTSTAT_MASK;
-}
-
-static inline void s6dmac_set_terminal_count(u32 dmac, int chan, u32 n)
-{
-	n &= S6_DMA_TERMCNTNB_MASK;
-	n |= readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB)
-	      & ~S6_DMA_TERMCNTNB_MASK;
-	writel(n, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB);
-}
-
-static inline u32 s6dmac_get_terminal_count(u32 dmac, int chan)
-{
-	return (readl(DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB))
-		& S6_DMA_TERMCNTNB_MASK;
-}
-
-static inline u32 s6dmac_timestamp(u32 dmac, int chan)
-{
-	return readl(DMA_CHNL(dmac, chan) + S6_DMA_TIMESTAMP);
-}
-
-static inline u32 s6dmac_cur_src(u32 dmac, int chan)
-{
-	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_SRC);
-}
-
-static inline u32 s6dmac_cur_dst(u32 dmac, int chan)
-{
-	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CUR_DST);
-}
-
-static inline void s6dmac_disable_chan(u32 dmac, int chan)
-{
-	u32 ctrl;
-	writel(readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL)
-		& ~(1 << S6_DMA_CHNCTRL_ENABLE),
-		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
-	do
-		ctrl = readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
-	while (ctrl & (1 << S6_DMA_CHNCTRL_ENABLE));
-}
-
-static inline void s6dmac_set_stride_skip(u32 dmac, int chan,
-	int comchunk,		/* 0: disable scatter/gather */
-	int srcskip, int dstskip)
-{
-	writel(comchunk, DMA_CHNL(dmac, chan) + S6_DMA_CMONCHUNK);
-	writel(srcskip, DMA_CHNL(dmac, chan) + S6_DMA_SRCSKIP);
-	writel(dstskip, DMA_CHNL(dmac, chan) + S6_DMA_DSTSKIP);
-}
-
-static inline void s6dmac_enable_chan(u32 dmac, int chan,
-	int prio,               /* 0 (highest) .. 3 (lowest) */
-	int periphxfer,         /* <0: disable p.req.line, 0..1: mode */
-	int srcinc, int dstinc, /* 0: dont increment src/dst address */
-	int comchunk,		/* 0: disable scatter/gather */
-	int srcskip, int dstskip,
-	int burstsize,		/* 4 for I2S, 7 for everything else */
-	int bandwidthconserve,  /* <0: disable, 0..1: select */
-	int lowwmark,           /* 0..15 */
-	int timestamp,		/* 0: disable timestamp */
-	int enable)		/* 0: disable for now */
-{
-	writel(1, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTNB);
-	writel(0, DMA_CHNL(dmac, chan) + S6_DMA_TERMCNTTMO);
-	writel(lowwmark << S6_DMA_CHNCTRL_LOWWMARK,
-		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
-	s6dmac_set_stride_skip(dmac, chan, comchunk, srcskip, dstskip);
-	writel(((enable ? 1 : 0) << S6_DMA_CHNCTRL_ENABLE) |
-		(prio << S6_DMA_CHNCTRL_PRIO) |
-		(((periphxfer > 0) ? 1 : 0) << S6_DMA_CHNCTRL_PERIPHXFER) |
-		(((periphxfer < 0) ? 0 : 1) << S6_DMA_CHNCTRL_PERIPHENA) |
-		((srcinc ? 1 : 0) << S6_DMA_CHNCTRL_SRCINC) |
-		((dstinc ? 1 : 0) << S6_DMA_CHNCTRL_DSTINC) |
-		(burstsize << S6_DMA_CHNCTRL_BURSTLOG) |
-		(((bandwidthconserve > 0) ? 1 : 0) << S6_DMA_CHNCTRL_BWCONSEL) |
-		(((bandwidthconserve < 0) ? 0 : 1) << S6_DMA_CHNCTRL_BWCONENA) |
-		(lowwmark << S6_DMA_CHNCTRL_LOWWMARK) |
-		((timestamp ? 1 : 0) << S6_DMA_CHNCTRL_TSTAMP),
-		DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL);
-}
-
-
-/* DMA control, per engine */
-
-static inline unsigned _dmac_addr_index(u32 dmac)
-{
-	unsigned i = S6_DMAC_INDEX(dmac);
-	if (s6dmac_ctrl[i].dmac != dmac)
-		BUG();
-	return i;
-}
-
-static inline void _s6dmac_disable_error_irqs(u32 dmac, u32 mask)
-{
-	writel(mask, dmac + S6_DMA_TERMCNTIRQCLR);
-	writel(mask, dmac + S6_DMA_PENDCNTIRQCLR);
-	writel(mask, dmac + S6_DMA_LOWWMRKIRQCLR);
-	writel(readl(dmac + S6_DMA_INTENABLE0)
-		& ~((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER)),
-		dmac + S6_DMA_INTENABLE0);
-	writel(readl(dmac + S6_DMA_INTENABLE1) & ~(mask << S6_DMA_INT1_CHANNEL),
-		dmac + S6_DMA_INTENABLE1);
-	writel((mask << S6_DMA_INT0_UNDER) | (mask << S6_DMA_INT0_OVER),
-		dmac + S6_DMA_INTCLEAR0);
-	writel(mask << S6_DMA_INT1_CHANNEL, dmac + S6_DMA_INTCLEAR1);
-}
-
-/*
- * request channel from specified engine
- * with chan<0, accept any channel
- * further parameters see s6dmac_enable_chan
- * returns < 0 upon error, channel nb otherwise
- */
-static inline int s6dmac_request_chan(u32 dmac, int chan,
-	int prio,
-	int periphxfer,
-	int srcinc, int dstinc,
-	int comchunk,
-	int srcskip, int dstskip,
-	int burstsize,
-	int bandwidthconserve,
-	int lowwmark,
-	int timestamp,
-	int enable)
-{
-	int r = chan;
-	unsigned long flags;
-	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
-	spin_lock_irqsave(spinl, flags);
-	if (r < 0) {
-		r = (readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_CHAN)
-			& S6_DMA_NEXTFREE_CHAN_MASK;
-	}
-	if (r >= s6dmac_ctrl[_dmac_addr_index(dmac)].chan_nb) {
-		if (chan < 0)
-			r = -EBUSY;
-		else
-			r = -ENXIO;
-	} else if (((readl(dmac + S6_DMA_NEXTFREE) >> S6_DMA_NEXTFREE_ENA)
-			>> r) & 1) {
-		r = -EBUSY;
-	} else {
-		s6dmac_enable_chan(dmac, r, prio, periphxfer,
-			srcinc, dstinc, comchunk, srcskip, dstskip, burstsize,
-			bandwidthconserve, lowwmark, timestamp, enable);
-	}
-	spin_unlock_irqrestore(spinl, flags);
-	return r;
-}
-
-static inline void s6dmac_put_fifo(u32 dmac, int chan,
-	u32 src, u32 dst, u32 size)
-{
-	unsigned long flags;
-	spinlock_t *spinl = &s6dmac_ctrl[_dmac_addr_index(dmac)].lock;
-	spin_lock_irqsave(spinl, flags);
-	writel(src, dmac + S6_DMA_DESCRFIFO0);
-	writel(dst, dmac + S6_DMA_DESCRFIFO1);
-	writel(size, dmac + S6_DMA_DESCRFIFO2);
-	writel(chan, dmac + S6_DMA_DESCRFIFO3);
-	spin_unlock_irqrestore(spinl, flags);
-}
-
-static inline u32 s6dmac_channel_enabled(u32 dmac, int chan)
-{
-	return readl(DMA_CHNL(dmac, chan) + S6_DMA_CHNCTRL) &
-			(1 << S6_DMA_CHNCTRL_ENABLE);
-}
-
-/*
- * group 1-4 data port channels
- * with port=0..3, nrch=1-4 channels,
- * frrep=0/1 (dis- or enable frame repeat)
- */
-static inline void s6dmac_dp_setup_group(u32 dmac, int port,
-			int nrch, int frrep)
-{
-	static const u8 mask[4] = {0, 3, 1, 2};
-	BUG_ON(dmac != S6_REG_DPDMA);
-	if ((port < 0) || (port > 3) || (nrch < 1) || (nrch > 4))
-		return;
-	writel((mask[nrch - 1] << S6_DMA_DPORTCTRLGRP_NRCHANS)
-		| ((frrep ? 1 : 0) << S6_DMA_DPORTCTRLGRP_FRAMEREP),
-		dmac + S6_DMA_DPORTCTRLGRP(port));
-}
-
-static inline void s6dmac_dp_switch_group(u32 dmac, int port, int enable)
-{
-	u32 tmp;
-	BUG_ON(dmac != S6_REG_DPDMA);
-	tmp = readl(dmac + S6_DMA_DPORTCTRLGRP(port));
-	if (enable)
-		tmp |= (1 << S6_DMA_DPORTCTRLGRP_ENA);
-	else
-		tmp &= ~(1 << S6_DMA_DPORTCTRLGRP_ENA);
-	writel(tmp, dmac + S6_DMA_DPORTCTRLGRP(port));
-}
-
-extern void s6dmac_put_fifo_cache(u32 dmac, int chan,
-	u32 src, u32 dst, u32 size);
-extern void s6dmac_disable_error_irqs(u32 dmac, u32 mask);
-extern u32 s6dmac_int_sources(u32 dmac, u32 channel);
-extern void s6dmac_release_chan(u32 dmac, int chan);
-
-#endif /* __ASM_XTENSA_S6000_DMAC_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h
deleted file mode 100644
index 8484ab0..0000000
--- a/arch/xtensa/variants/s6000/include/variant/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _XTENSA_VARIANT_S6000_GPIO_H
-#define _XTENSA_VARIANT_S6000_GPIO_H
-
-extern int s6_gpio_init(u32 afsel);
-
-#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/hardware.h b/arch/xtensa/variants/s6000/include/variant/hardware.h
deleted file mode 100644
index 5d9ba09..0000000
--- a/arch/xtensa/variants/s6000/include/variant/hardware.h
+++ /dev/null
@@ -1,259 +0,0 @@
-#ifndef __XTENSA_S6000_HARDWARE_H
-#define __XTENSA_S6000_HARDWARE_H
-
-#define S6_SCLK			1843200
-
-#define S6_MEM_REG              0x20000000
-#define S6_MEM_EFI              0x33F00000
-#define S6_MEM_PCIE_DATARAM1    0x34000000
-#define S6_MEM_XLMI             0x37F80000
-#define S6_MEM_PIF_DATARAM1     0x37FFC000
-#define S6_MEM_GMAC             0x38000000
-#define S6_MEM_I2S              0x3A000000
-#define S6_MEM_EGIB             0x3C000000
-#define S6_MEM_PCIE_CFG         0x3E000000
-#define S6_MEM_PIF_DATARAM      0x3FFE0000
-#define S6_MEM_XLMI_DATARAM     0x3FFF0000
-#define S6_MEM_DDR              0x40000000
-#define S6_MEM_PCIE_APER        0xC0000000
-#define S6_MEM_AUX              0xF0000000
-
-/* Device addresses */
-
-#define S6_REG_SCB              S6_MEM_REG
-#define S6_REG_NB               (S6_REG_SCB + 0x10000)
-#define S6_REG_LMSDMA           (S6_REG_SCB + 0x20000)
-#define S6_REG_NI               (S6_REG_SCB + 0x30000)
-#define S6_REG_NIDMA            (S6_REG_SCB + 0x40000)
-#define S6_REG_NS               (S6_REG_SCB + 0x50000)
-#define S6_REG_DDR              (S6_REG_SCB + 0x60000)
-#define S6_REG_GREG1            (S6_REG_SCB + 0x70000)
-#define S6_REG_DP               (S6_REG_SCB + 0x80000)
-#define S6_REG_DPDMA            (S6_REG_SCB + 0x90000)
-#define S6_REG_EGIB             (S6_REG_SCB + 0xA0000)
-#define S6_REG_PCIE             (S6_REG_SCB + 0xB0000)
-#define S6_REG_I2S              (S6_REG_SCB + 0xC0000)
-#define S6_REG_GMAC             (S6_REG_SCB + 0xD0000)
-#define S6_REG_HIFDMA           (S6_REG_SCB + 0xE0000)
-#define S6_REG_GREG2            (S6_REG_SCB + 0xF0000)
-
-#define S6_REG_APB              S6_REG_SCB
-#define S6_REG_UART             (S6_REG_APB + 0x0000)
-#define S6_REG_INTC             (S6_REG_APB + 0x2000)
-#define S6_REG_SPI              (S6_REG_APB + 0x3000)
-#define S6_REG_I2C              (S6_REG_APB + 0x4000)
-#define S6_REG_GPIO             (S6_REG_APB + 0x8000)
-
-/* Global register block */
-
-#define S6_GREG1_PLL_LOCKCLEAR	0x000
-#define S6_GREG1_PLL_LOCK_SYS		0
-#define S6_GREG1_PLL_LOCK_IO		1
-#define S6_GREG1_PLL_LOCK_AIM		2
-#define S6_GREG1_PLL_LOCK_DP0		3
-#define S6_GREG1_PLL_LOCK_DP2		4
-#define S6_GREG1_PLL_LOCK_DDR		5
-#define S6_GREG1_PLL_LOCKSTAT	0x004
-#define S6_GREG1_PLL_LOCKSTAT_CURLOCK	0
-#define S6_GREG1_PLL_LOCKSTAT_EVERUNLCK	8
-#define S6_GREG1_PLLSEL		0x010
-#define S6_GREG1_PLLSEL_AIM		0
-#define S6_GREG1_PLLSEL_AIM_DDR2		0
-#define S6_GREG1_PLLSEL_AIM_300MHZ		1
-#define S6_GREG1_PLLSEL_AIM_240MHZ		2
-#define S6_GREG1_PLLSEL_AIM_200MHZ		3
-#define S6_GREG1_PLLSEL_AIM_150MHZ		4
-#define S6_GREG1_PLLSEL_AIM_120MHZ		5
-#define S6_GREG1_PLLSEL_AIM_40MHZ		6
-#define S6_GREG1_PLLSEL_AIM_PLLAIMREF		7
-#define S6_GREG1_PLLSEL_AIM_MASK		7
-#define S6_GREG1_PLLSEL_DDR		8
-#define S6_GREG1_PLLSEL_DDR_HS			0
-#define S6_GREG1_PLLSEL_DDR_333MHZ		1
-#define S6_GREG1_PLLSEL_DDR_250MHZ		2
-#define S6_GREG1_PLLSEL_DDR_200MHZ		3
-#define S6_GREG1_PLLSEL_DDR_167MHZ		4
-#define S6_GREG1_PLLSEL_DDR_100MHZ		5
-#define S6_GREG1_PLLSEL_DDR_33MHZ		6
-#define S6_GREG1_PLLSEL_DDR_PLLIOREF		7
-#define S6_GREG1_PLLSEL_DDR_MASK		7
-#define S6_GREG1_PLLSEL_GMAC		16
-#define S6_GREG1_PLLSEL_GMAC_125MHZ		0
-#define S6_GREG1_PLLSEL_GMAC_25MHZ		1
-#define S6_GREG1_PLLSEL_GMAC_2500KHZ		2
-#define S6_GREG1_PLLSEL_GMAC_EXTERN		3
-#define S6_GREG1_PLLSEL_GMAC_MASK		3
-#define S6_GREG1_PLLSEL_GMII		18
-#define S6_GREG1_PLLSEL_GMII_111MHZ		0
-#define S6_GREG1_PLLSEL_GMII_IOREF		1
-#define S6_GREG1_PLLSEL_GMII_NONE		2
-#define S6_GREG1_PLLSEL_GMII_125MHZ		3
-#define S6_GREG1_PLLSEL_GMII_MASK		3
-#define S6_GREG1_SYSUNLOCKCNT	0x020
-#define S6_GREG1_IOUNLOCKCNT	0x024
-#define S6_GREG1_AIMUNLOCKCNT	0x028
-#define S6_GREG1_DP0UNLOCKCNT	0x02C
-#define S6_GREG1_DP2UNLOCKCNT	0x030
-#define S6_GREG1_DDRUNLOCKCNT	0x034
-#define S6_GREG1_CLKBAL0	0x040
-#define S6_GREG1_CLKBAL0_LSGB		0
-#define S6_GREG1_CLKBAL0_LSPX		8
-#define S6_GREG1_CLKBAL0_MEMDO		16
-#define S6_GREG1_CLKBAL0_HSXT1		24
-#define S6_GREG1_CLKBAL1	0x044
-#define S6_GREG1_CLKBAL1_HSISEF		0
-#define S6_GREG1_CLKBAL1_HSNI		8
-#define S6_GREG1_CLKBAL1_HSNS		16
-#define S6_GREG1_CLKBAL1_HSISEFCFG	24
-#define S6_GREG1_CLKBAL2	0x048
-#define S6_GREG1_CLKBAL2_LSNB		0
-#define S6_GREG1_CLKBAL2_LSSB		8
-#define S6_GREG1_CLKBAL2_LSREST		24
-#define S6_GREG1_CLKBAL3	0x04C
-#define S6_GREG1_CLKBAL3_ISEFXAD	0
-#define S6_GREG1_CLKBAL3_ISEFLMS	8
-#define S6_GREG1_CLKBAL3_ISEFISEF	16
-#define S6_GREG1_CLKBAL3_DDRDD		24
-#define S6_GREG1_CLKBAL4	0x050
-#define S6_GREG1_CLKBAL4_DDRDP		0
-#define S6_GREG1_CLKBAL4_DDRDO		8
-#define S6_GREG1_CLKBAL4_DDRNB		16
-#define S6_GREG1_CLKBAL4_DDRLMS		24
-#define S6_GREG1_BLOCKENA	0x100
-#define S6_GREG1_BLOCK_DDR		0
-#define S6_GREG1_BLOCK_DP		1
-#define S6_GREG1_BLOCK_NSNI		2
-#define S6_GREG1_BLOCK_PCIE		3
-#define S6_GREG1_BLOCK_GMAC		4
-#define S6_GREG1_BLOCK_I2S		5
-#define S6_GREG1_BLOCK_EGIB		6
-#define S6_GREG1_BLOCK_SB		7
-#define S6_GREG1_BLOCK_XT1		8
-#define S6_GREG1_CLKGATE	0x104
-#define S6_GREG1_BGATE_AIMNORTH		9
-#define S6_GREG1_BGATE_AIMEAST		10
-#define S6_GREG1_BGATE_AIMWEST		11
-#define S6_GREG1_BGATE_AIMSOUTH		12
-#define S6_GREG1_CHIPRES	0x108
-#define S6_GREG1_CHIPRES_SOFTRES	0
-#define S6_GREG1_CHIPRES_LOSTLOCK	1
-#define S6_GREG1_RESETCAUSE	0x10C
-#define S6_GREG1_RESETCAUSE_RESETN	0
-#define S6_GREG1_RESETCAUSE_GLOBAL	1
-#define S6_GREG1_RESETCAUSE_WDOGTIMER	2
-#define S6_GREG1_RESETCAUSE_SWCHIP	3
-#define S6_GREG1_RESETCAUSE_PLLSYSLOSS	4
-#define S6_GREG1_RESETCAUSE_PCIE	5
-#define S6_GREG1_RESETCAUSE_CREATEDGLOB	6
-#define S6_GREG1_REFCLOCKCNT	0x110
-#define S6_GREG1_RESETTIMER	0x114
-#define S6_GREG1_NMITIMER	0x118
-#define S6_GREG1_GLOBAL_TIMER	0x11C
-#define S6_GREG1_TIMER0		0x180
-#define S6_GREG1_TIMER1		0x184
-#define S6_GREG1_UARTCLOCKSEL	0x204
-#define S6_GREG1_CHIPVERSPACKG	0x208
-#define S6_GREG1_CHIPVERSPACKG_CHIPVID	0
-#define S6_GREG1_CHIPVERSPACKG_PACKSEL	8
-#define S6_GREG1_ONDIETERMCTRL	0x20C
-#define S6_GREG1_ONDIETERMCTRL_WEST	0
-#define S6_GREG1_ONDIETERMCTRL_NORTH	2
-#define S6_GREG1_ONDIETERMCTRL_EAST	4
-#define S6_GREG1_ONDIETERMCTRL_SOUTH	6
-#define S6_GREG1_ONDIETERMCTRL_NONE		0
-#define S6_GREG1_ONDIETERMCTRL_75OHM		2
-#define S6_GREG1_ONDIETERMCTRL_MASK		3
-#define S6_GREG1_BOOT_CFG0	0x210
-#define S6_GREG1_BOOT_CFG0_AIMSTRONG	1
-#define S6_GREG1_BOOT_CFG0_MINIBOOTDL	2
-#define S6_GREG1_BOOT_CFG0_OCDGPIO8SET	5
-#define S6_GREG1_BOOT_CFG0_OCDGPIOENA	6
-#define S6_GREG1_BOOT_CFG0_DOWNSTREAM	7
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV	8
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_300MHZ	1
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_240MHZ	2
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_200MHZ	3
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_150MHZ	4
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_120MHZ	5
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_40MHZ	6
-#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_MASK	7
-#define S6_GREG1_BOOT_CFG0_BALHSLMS	12
-#define S6_GREG1_BOOT_CFG0_BALHSNB	18
-#define S6_GREG1_BOOT_CFG0_BALHSXAD	24
-#define S6_GREG1_BOOT_CFG1	0x214
-#define S6_GREG1_BOOT_CFG1_PCIE1LANE	1
-#define S6_GREG1_BOOT_CFG1_MPLLPRESCALE	2
-#define S6_GREG1_BOOT_CFG1_MPLLNCY	4
-#define S6_GREG1_BOOT_CFG1_MPLLNCY5	9
-#define S6_GREG1_BOOT_CFG1_BALHSREST	14
-#define S6_GREG1_BOOT_CFG1_BALHSPSMEMS	20
-#define S6_GREG1_BOOT_CFG1_BALLSGI	26
-#define S6_GREG1_BOOT_CFG2	0x218
-#define S6_GREG1_BOOT_CFG2_PEID		0
-#define S6_GREG1_BOOT_CFG3	0x21C
-#define S6_GREG1_DRAMBUSYHOLDOF	0x220
-#define S6_GREG1_DRAMBUSYHOLDOF_XT0	0
-#define S6_GREG1_DRAMBUSYHOLDOF_XT1	4
-#define S6_GREG1_DRAMBUSYHOLDOF_XT_MASK		7
-#define S6_GREG1_PCIEBAR1SIZE	0x224
-#define S6_GREG1_PCIEBAR2SIZE	0x228
-#define S6_GREG1_PCIEVENDOR	0x22C
-#define S6_GREG1_PCIEDEVICE	0x230
-#define S6_GREG1_PCIEREV	0x234
-#define S6_GREG1_PCIECLASS	0x238
-#define S6_GREG1_XT1DCACHEMISS	0x240
-#define S6_GREG1_XT1ICACHEMISS	0x244
-#define S6_GREG1_HWSEMAPHORE(n)	(0x400 + 4 * (n))
-#define S6_GREG1_HWSEMAPHORE_NB		16
-
-/* peripheral interrupt numbers */
-
-#define S6_INTC_GPIO(n)			(n)		/* 0..3 */
-#define S6_INTC_I2C			4
-#define S6_INTC_SPI			5
-#define S6_INTC_NB_ERR			6
-#define S6_INTC_DMA_LMSERR		7
-#define S6_INTC_DMA_LMSLOWWMRK(n)	(8 + (n))	/* 0..11 */
-#define S6_INTC_DMA_LMSPENDCNT(n)	(20 + (n))	/* 0..11 */
-#define S6_INTC_DMA HOSTLOWWMRK(n)	(32 + (n))	/* 0..6 */
-#define S6_INTC_DMA_HOSTPENDCNT(n)	(39 + (n))	/* 0..6 */
-#define S6_INTC_DMA_HOSTERR		46
-#define S6_INTC_UART(n)			(47 + (n))	/* 0..1 */
-#define S6_INTC_XAD			49
-#define S6_INTC_NI_ERR			50
-#define S6_INTC_NI_INFIFOFULL		51
-#define S6_INTC_DMA_NIERR		52
-#define S6_INTC_DMA_NILOWWMRK(n)	(53 + (n))	/* 0..3 */
-#define S6_INTC_DMA_NIPENDCNT(n)	(57 + (n))	/* 0..3 */
-#define S6_INTC_DDR			61
-#define S6_INTC_NS_ERR			62
-#define S6_INTC_EFI_CFGERR		63
-#define S6_INTC_EFI_ISEFTEST		64
-#define S6_INTC_EFI_WRITEERR		65
-#define S6_INTC_NMI_TIMER		66
-#define S6_INTC_PLLLOCK_SYS		67
-#define S6_INTC_PLLLOCK_IO		68
-#define S6_INTC_PLLLOCK_AIM		69
-#define S6_INTC_PLLLOCK_DP0		70
-#define S6_INTC_PLLLOCK_DP2		71
-#define S6_INTC_I2S_ERR			72
-#define S6_INTC_GMAC_STAT		73
-#define S6_INTC_GMAC_ERR		74
-#define S6_INTC_GIB_ERR			75
-#define S6_INTC_PCIE_ERR		76
-#define S6_INTC_PCIE_MSI(n)		(77 + (n))	/* 0..3 */
-#define S6_INTC_PCIE_INTA		81
-#define S6_INTC_PCIE_INTB		82
-#define S6_INTC_PCIE_INTC		83
-#define S6_INTC_PCIE_INTD		84
-#define S6_INTC_SW(n)			(85 + (n))	/* 0..9 */
-#define S6_INTC_SW_ENABLE(n)		(85 + 256 + (n))
-#define S6_INTC_DMA_DP_ERR		95
-#define S6_INTC_DMA_DPLOWWMRK(n)	(96 + (n))	/* 0..3 */
-#define S6_INTC_DMA_DPPENDCNT(n)	(100 + (n))	/* 0..3 */
-#define S6_INTC_DMA_DPTERMCNT(n)	(104 + (n))	/* 0..3 */
-#define S6_INTC_TIMER0			108
-#define S6_INTC_TIMER1			109
-#define S6_INTC_DMA_HOSTTERMCNT(n)	(110 + (n))	/* 0..6 */
-
-#endif /* __XTENSA_S6000_HARDWARE_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/irq.h b/arch/xtensa/variants/s6000/include/variant/irq.h
deleted file mode 100644
index 39ca751a..0000000
--- a/arch/xtensa/variants/s6000/include/variant/irq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _XTENSA_S6000_IRQ_H
-#define _XTENSA_S6000_IRQ_H
-
-#define VARIANT_NR_IRQS 8 /* GPIO interrupts */
-
-extern void variant_irq_enable(unsigned int irq);
-
-#endif /* __XTENSA_S6000_IRQ_H */
diff --git a/arch/xtensa/variants/s6000/include/variant/tie-asm.h b/arch/xtensa/variants/s6000/include/variant/tie-asm.h
deleted file mode 100644
index f02d0a3..0000000
--- a/arch/xtensa/variants/s6000/include/variant/tie-asm.h
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * This header file contains assembly-language definitions (assembly
- * macros, etc.) for this specific Xtensa processor's TIE extensions
- * and options.  It is customized to this Xtensa processor configuration.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999-2008 Tensilica Inc.
- */
-
-#ifndef _XTENSA_CORE_TIE_ASM_H
-#define _XTENSA_CORE_TIE_ASM_H
-
-/*  Selection parameter values for save-area save/restore macros:  */
-/*  Option vs. TIE:  */
-#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
-#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
-/*  Whether used automatically by compiler:  */
-#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
-#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
-/*  ABI handling across function calls:  */
-#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
-#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
-#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
-/*  Misc  */
-#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
-
-
-
-/* Macro to save all non-coprocessor (extra) custom TIE and optional state
- * (not including zero-overhead loop registers).
- * Save area ptr (clobbered):  ptr  (16 byte aligned)
- * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
- */
-	.macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
-	xchal_sa_start	\continue, \ofs
-	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
-	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
-	rsr	\at1, BR		// boolean option
-	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
-	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
-	.endif
-	.endm	// xchal_ncp_store
-
-/* Macro to save all non-coprocessor (extra) custom TIE and optional state
- * (not including zero-overhead loop registers).
- * Save area ptr (clobbered):  ptr  (16 byte aligned)
- * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
- */
-	.macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
-	xchal_sa_start	\continue, \ofs
-	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
-	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
-	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
-	wsr	\at1, BR		// boolean option
-	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
-	.endif
-	.endm	// xchal_ncp_load
-
-
-
-#define XCHAL_NCP_NUM_ATMPS	1
-
-
-
-/* Macro to save the state of TIE coprocessor FPU.
- * Save area ptr (clobbered):  ptr  (16 byte aligned)
- * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP0_NUM_ATMPS needed)
- */
-#define xchal_cp_FPU_store	xchal_cp0_store
-/* #define xchal_cp_FPU_store_a2	xchal_cp0_store a2 a3 a4 a5 a6 */
-	.macro	xchal_cp0_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
-	xchal_sa_start \continue, \ofs
-	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
-	xchal_sa_align	\ptr, 0, 0, 1, 16
-	rur232	\at1		// FCR
-	s32i	\at1, \ptr, 0
-	rur233	\at1		// FSR
-	s32i	\at1, \ptr, 4
-	SSI f0, \ptr,  8
-	SSI f1, \ptr,  12
-	SSI f2, \ptr,  16
-	SSI f3, \ptr,  20
-	SSI f4, \ptr,  24
-	SSI f5, \ptr,  28
-	SSI f6, \ptr,  32
-	SSI f7, \ptr,  36
-	SSI f8, \ptr,  40
-	SSI f9, \ptr,  44
-	SSI f10, \ptr,  48
-	SSI f11, \ptr,  52
-	SSI f12, \ptr,  56
-	SSI f13, \ptr,  60
-	SSI f14, \ptr,  64
-	SSI f15, \ptr,  68
-	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
-	.endif
-	.endm	// xchal_cp0_store
-
-/* Macro to restore the state of TIE coprocessor FPU.
- * Save area ptr (clobbered):  ptr  (16 byte aligned)
- * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP0_NUM_ATMPS needed)
- */
-#define xchal_cp_FPU_load	xchal_cp0_load
-/* #define xchal_cp_FPU_load_a2	xchal_cp0_load a2 a3 a4 a5 a6 */
-	.macro	xchal_cp0_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
-	xchal_sa_start \continue, \ofs
-	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
-	xchal_sa_align	\ptr, 0, 0, 1, 16
-	l32i	\at1, \ptr, 0
-	wur232	\at1		// FCR
-	l32i	\at1, \ptr, 4
-	wur233	\at1		// FSR
-	LSI f0, \ptr,  8
-	LSI f1, \ptr,  12
-	LSI f2, \ptr,  16
-	LSI f3, \ptr,  20
-	LSI f4, \ptr,  24
-	LSI f5, \ptr,  28
-	LSI f6, \ptr,  32
-	LSI f7, \ptr,  36
-	LSI f8, \ptr,  40
-	LSI f9, \ptr,  44
-	LSI f10, \ptr,  48
-	LSI f11, \ptr,  52
-	LSI f12, \ptr,  56
-	LSI f13, \ptr,  60
-	LSI f14, \ptr,  64
-	LSI f15, \ptr,  68
-	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
-	.endif
-	.endm	// xchal_cp0_load
-
-#define XCHAL_CP0_NUM_ATMPS	1
-
-/* Macro to save the state of TIE coprocessor XAD.
- * Save area ptr (clobbered):  ptr  (16 byte aligned)
- * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP6_NUM_ATMPS needed)
- */
-#define xchal_cp_XAD_store	xchal_cp6_store
-/* #define xchal_cp_XAD_store_a2	xchal_cp6_store a2 a3 a4 a5 a6 */
-	.macro	xchal_cp6_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
-	xchal_sa_start \continue, \ofs
-	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
-	xchal_sa_align	\ptr, 0, 0, 1, 16
-	rur0	\at1		// LDCBHI
-	s32i	\at1, \ptr, 0
-	rur1	\at1		// LDCBLO
-	s32i	\at1, \ptr, 4
-	rur2	\at1		// STCBHI
-	s32i	\at1, \ptr, 8
-	rur3	\at1		// STCBLO
-	s32i	\at1, \ptr, 12
-	rur8	\at1		// LDBRBASE
-	s32i	\at1, \ptr, 16
-	rur9	\at1		// LDBROFF
-	s32i	\at1, \ptr, 20
-	rur10	\at1		// LDBRINC
-	s32i	\at1, \ptr, 24
-	rur11	\at1		// STBRBASE
-	s32i	\at1, \ptr, 28
-	rur12	\at1		// STBROFF
-	s32i	\at1, \ptr, 32
-	rur13	\at1		// STBRINC
-	s32i	\at1, \ptr, 36
-	rur24	\at1		// SCRATCH0
-	s32i	\at1, \ptr, 40
-	rur25	\at1		// SCRATCH1
-	s32i	\at1, \ptr, 44
-	rur26	\at1		// SCRATCH2
-	s32i	\at1, \ptr, 48
-	rur27	\at1		// SCRATCH3
-	s32i	\at1, \ptr, 52
-	WRAS128I wra0, \ptr,  64
-	WRAS128I wra1, \ptr,  80
-	WRAS128I wra2, \ptr,  96
-	WRAS128I wra3, \ptr,  112
-	WRAS128I wra4, \ptr,  128
-	WRAS128I wra5, \ptr,  144
-	WRAS128I wra6, \ptr,  160
-	WRAS128I wra7, \ptr,  176
-	WRAS128I wra8, \ptr,  192
-	WRAS128I wra9, \ptr,  208
-	WRAS128I wra10, \ptr,  224
-	WRAS128I wra11, \ptr,  240
-	WRAS128I wra12, \ptr,  256
-	WRAS128I wra13, \ptr,  272
-	WRAS128I wra14, \ptr,  288
-	WRAS128I wra15, \ptr,  304
-	WRBS128I wrb0, \ptr,  320
-	WRBS128I wrb1, \ptr,  336
-	WRBS128I wrb2, \ptr,  352
-	WRBS128I wrb3, \ptr,  368
-	WRBS128I wrb4, \ptr,  384
-	WRBS128I wrb5, \ptr,  400
-	WRBS128I wrb6, \ptr,  416
-	WRBS128I wrb7, \ptr,  432
-	WRBS128I wrb8, \ptr,  448
-	WRBS128I wrb9, \ptr,  464
-	WRBS128I wrb10, \ptr,  480
-	WRBS128I wrb11, \ptr,  496
-	WRBS128I wrb12, \ptr,  512
-	WRBS128I wrb13, \ptr,  528
-	WRBS128I wrb14, \ptr,  544
-	WRBS128I wrb15, \ptr,  560
-	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 576
-	.endif
-	.endm	// xchal_cp6_store
-
-/* Macro to restore the state of TIE coprocessor XAD.
- * Save area ptr (clobbered):  ptr  (16 byte aligned)
- * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP6_NUM_ATMPS needed)
- */
-#define xchal_cp_XAD_load	xchal_cp6_load
-/* #define xchal_cp_XAD_load_a2	xchal_cp6_load a2 a3 a4 a5 a6 */
-	.macro	xchal_cp6_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
-	xchal_sa_start \continue, \ofs
-	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
-	xchal_sa_align	\ptr, 0, 0, 1, 16
-	l32i	\at1, \ptr, 0
-	wur0	\at1		// LDCBHI
-	l32i	\at1, \ptr, 4
-	wur1	\at1		// LDCBLO
-	l32i	\at1, \ptr, 8
-	wur2	\at1		// STCBHI
-	l32i	\at1, \ptr, 12
-	wur3	\at1		// STCBLO
-	l32i	\at1, \ptr, 16
-	wur8	\at1		// LDBRBASE
-	l32i	\at1, \ptr, 20
-	wur9	\at1		// LDBROFF
-	l32i	\at1, \ptr, 24
-	wur10	\at1		// LDBRINC
-	l32i	\at1, \ptr, 28
-	wur11	\at1		// STBRBASE
-	l32i	\at1, \ptr, 32
-	wur12	\at1		// STBROFF
-	l32i	\at1, \ptr, 36
-	wur13	\at1		// STBRINC
-	l32i	\at1, \ptr, 40
-	wur24	\at1		// SCRATCH0
-	l32i	\at1, \ptr, 44
-	wur25	\at1		// SCRATCH1
-	l32i	\at1, \ptr, 48
-	wur26	\at1		// SCRATCH2
-	l32i	\at1, \ptr, 52
-	wur27	\at1		// SCRATCH3
-	WRBL128I wrb0, \ptr,  320
-	WRBL128I wrb1, \ptr,  336
-	WRBL128I wrb2, \ptr,  352
-	WRBL128I wrb3, \ptr,  368
-	WRBL128I wrb4, \ptr,  384
-	WRBL128I wrb5, \ptr,  400
-	WRBL128I wrb6, \ptr,  416
-	WRBL128I wrb7, \ptr,  432
-	WRBL128I wrb8, \ptr,  448
-	WRBL128I wrb9, \ptr,  464
-	WRBL128I wrb10, \ptr,  480
-	WRBL128I wrb11, \ptr,  496
-	WRBL128I wrb12, \ptr,  512
-	WRBL128I wrb13, \ptr,  528
-	WRBL128I wrb14, \ptr,  544
-	WRBL128I wrb15, \ptr,  560
-	WRAL128I wra0, \ptr,  64
-	WRAL128I wra1, \ptr,  80
-	WRAL128I wra2, \ptr,  96
-	WRAL128I wra3, \ptr,  112
-	WRAL128I wra4, \ptr,  128
-	WRAL128I wra5, \ptr,  144
-	WRAL128I wra6, \ptr,  160
-	WRAL128I wra7, \ptr,  176
-	WRAL128I wra8, \ptr,  192
-	WRAL128I wra9, \ptr,  208
-	WRAL128I wra10, \ptr,  224
-	WRAL128I wra11, \ptr,  240
-	WRAL128I wra12, \ptr,  256
-	WRAL128I wra13, \ptr,  272
-	WRAL128I wra14, \ptr,  288
-	WRAL128I wra15, \ptr,  304
-	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 576
-	.endif
-	.endm	// xchal_cp6_load
-
-#define XCHAL_CP6_NUM_ATMPS	1
-#define XCHAL_SA_NUM_ATMPS	1
-
-	/*  Empty macros for unconfigured coprocessors:  */
-	.macro xchal_cp1_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp1_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp2_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp2_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp3_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp3_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp4_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp4_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp5_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp5_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp7_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-	.macro xchal_cp7_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
-
-#endif /*_XTENSA_CORE_TIE_ASM_H*/
-
diff --git a/arch/xtensa/variants/s6000/include/variant/tie.h b/arch/xtensa/variants/s6000/include/variant/tie.h
deleted file mode 100644
index be7ea84..0000000
--- a/arch/xtensa/variants/s6000/include/variant/tie.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * This header file describes this specific Xtensa processor's TIE extensions
- * that extend basic Xtensa core functionality.  It is customized to this
- * Xtensa processor configuration.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999-2008 Tensilica Inc.
- */
-
-#ifndef _XTENSA_CORE_TIE_H
-#define _XTENSA_CORE_TIE_H
-
-#define XCHAL_CP_NUM			2	/* number of coprocessors */
-#define XCHAL_CP_MAX			7	/* max CP ID + 1 (0 if none) */
-#define XCHAL_CP_MASK			0x41	/* bitmask of all CPs by ID */
-#define XCHAL_CP_PORT_MASK		0x00	/* bitmask of only port CPs */
-
-/*  Basic parameters of each coprocessor:  */
-#define XCHAL_CP0_NAME			"FPU"
-#define XCHAL_CP0_IDENT			FPU
-#define XCHAL_CP0_SA_SIZE		72	/* size of state save area */
-#define XCHAL_CP0_SA_ALIGN		4	/* min alignment of save area */
-#define XCHAL_CP_ID_FPU			0	/* coprocessor ID (0..7) */
-#define XCHAL_CP6_NAME			"XAD"
-#define XCHAL_CP6_IDENT			XAD
-#define XCHAL_CP6_SA_SIZE		576	/* size of state save area */
-#define XCHAL_CP6_SA_ALIGN		16	/* min alignment of save area */
-#define XCHAL_CP_ID_XAD			6	/* coprocessor ID (0..7) */
-
-/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
-#define XCHAL_CP1_SA_SIZE		0
-#define XCHAL_CP1_SA_ALIGN		1
-#define XCHAL_CP2_SA_SIZE		0
-#define XCHAL_CP2_SA_ALIGN		1
-#define XCHAL_CP3_SA_SIZE		0
-#define XCHAL_CP3_SA_ALIGN		1
-#define XCHAL_CP4_SA_SIZE		0
-#define XCHAL_CP4_SA_ALIGN		1
-#define XCHAL_CP5_SA_SIZE		0
-#define XCHAL_CP5_SA_ALIGN		1
-#define XCHAL_CP7_SA_SIZE		0
-#define XCHAL_CP7_SA_ALIGN		1
-
-/*  Save area for non-coprocessor optional and custom (TIE) state:  */
-#define XCHAL_NCP_SA_SIZE		4
-#define XCHAL_NCP_SA_ALIGN		4
-
-/*  Total save area for optional and custom state (NCP + CPn):  */
-#define XCHAL_TOTAL_SA_SIZE		672	/* with 16-byte align padding */
-#define XCHAL_TOTAL_SA_ALIGN		16	/* actual minimum alignment */
-
-/*
- * Detailed contents of save areas.
- * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
- * before expanding the XCHAL_xxx_SA_LIST() macros.
- *
- * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
- *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
- *
- *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
- *	ccused = set if used by compiler without special options or code
- *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
- *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
- *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
- *	name = lowercase reg name (no quotes)
- *	galign = group byte alignment (power of 2) (galign >= align)
- *	align = register byte alignment (power of 2)
- *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
- *	  (not including any pad bytes required to galign this or next reg)
- *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
- *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
- *	regnum = reg index in regfile, or special/TIE-user reg number
- *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
- *	gapsz = intervening bits, if bitsz bits not stored contiguously
- *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
- *	reset = register reset value (or 0 if undefined at reset)
- *	x = reserved for future use (0 until then)
- *
- *  To filter out certain registers, e.g. to expand only the non-global
- *  registers used by the compiler, you can do something like this:
- *
- *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
- *  #define SELCC0(p...)
- *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
- *  #define SELAK0(p...)		REG(p)
- *  #define SELAK1(p...)		REG(p)
- *  #define SELAK2(p...)
- *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
- *		...what you want to expand...
- */
-
-#define XCHAL_NCP_SA_NUM	1
-#define XCHAL_NCP_SA_LIST(s)	\
- XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0)
-
-#define XCHAL_CP0_SA_NUM	18
-#define XCHAL_CP0_SA_LIST(s)	\
- XCHAL_SA_REG(s,0,0,1,0,            fcr, 4, 4, 4,0x03E8,  ur,232, 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,            fsr, 4, 4, 4,0x03E9,  ur,233, 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f0, 4, 4, 4,0x0030,   f,0  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f1, 4, 4, 4,0x0031,   f,1  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f2, 4, 4, 4,0x0032,   f,2  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f3, 4, 4, 4,0x0033,   f,3  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f4, 4, 4, 4,0x0034,   f,4  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f5, 4, 4, 4,0x0035,   f,5  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f6, 4, 4, 4,0x0036,   f,6  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f7, 4, 4, 4,0x0037,   f,7  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f8, 4, 4, 4,0x0038,   f,8  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,             f9, 4, 4, 4,0x0039,   f,9  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,            f10, 4, 4, 4,0x003A,   f,10 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,            f11, 4, 4, 4,0x003B,   f,11 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,            f12, 4, 4, 4,0x003C,   f,12 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,            f13, 4, 4, 4,0x003D,   f,13 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,            f14, 4, 4, 4,0x003E,   f,14 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,            f15, 4, 4, 4,0x003F,   f,15 , 32,0,0,0)
-
-#define XCHAL_CP1_SA_NUM	0
-#define XCHAL_CP1_SA_LIST(s)	/* empty */
-
-#define XCHAL_CP2_SA_NUM	0
-#define XCHAL_CP2_SA_LIST(s)	/* empty */
-
-#define XCHAL_CP3_SA_NUM	0
-#define XCHAL_CP3_SA_LIST(s)	/* empty */
-
-#define XCHAL_CP4_SA_NUM	0
-#define XCHAL_CP4_SA_LIST(s)	/* empty */
-
-#define XCHAL_CP5_SA_NUM	0
-#define XCHAL_CP5_SA_LIST(s)	/* empty */
-
-#define XCHAL_CP6_SA_NUM	46
-#define XCHAL_CP6_SA_LIST(s)	\
- XCHAL_SA_REG(s,0,0,1,0,         ldcbhi,16, 4, 4,0x0300,  ur,0  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,         ldcblo, 4, 4, 4,0x0301,  ur,1  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,         stcbhi, 4, 4, 4,0x0302,  ur,2  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,         stcblo, 4, 4, 4,0x0303,  ur,3  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,       ldbrbase, 4, 4, 4,0x0308,  ur,8  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,        ldbroff, 4, 4, 4,0x0309,  ur,9  , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,        ldbrinc, 4, 4, 4,0x030A,  ur,10 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,       stbrbase, 4, 4, 4,0x030B,  ur,11 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,        stbroff, 4, 4, 4,0x030C,  ur,12 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,        stbrinc, 4, 4, 4,0x030D,  ur,13 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,       scratch0, 4, 4, 4,0x0318,  ur,24 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,       scratch1, 4, 4, 4,0x0319,  ur,25 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,       scratch2, 4, 4, 4,0x031A,  ur,26 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,1,0,       scratch3, 4, 4, 4,0x031B,  ur,27 , 32,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra0,16,16,16,0x1010, wra,0  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra1,16,16,16,0x1011, wra,1  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra2,16,16,16,0x1012, wra,2  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra3,16,16,16,0x1013, wra,3  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra4,16,16,16,0x1014, wra,4  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra5,16,16,16,0x1015, wra,5  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra6,16,16,16,0x1016, wra,6  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra7,16,16,16,0x1017, wra,7  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra8,16,16,16,0x1018, wra,8  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wra9,16,16,16,0x1019, wra,9  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wra10,16,16,16,0x101A, wra,10 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wra11,16,16,16,0x101B, wra,11 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wra12,16,16,16,0x101C, wra,12 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wra13,16,16,16,0x101D, wra,13 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wra14,16,16,16,0x101E, wra,14 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wra15,16,16,16,0x101F, wra,15 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb0,16,16,16,0x1020, wrb,0  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb1,16,16,16,0x1021, wrb,1  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb2,16,16,16,0x1022, wrb,2  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb3,16,16,16,0x1023, wrb,3  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb4,16,16,16,0x1024, wrb,4  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb5,16,16,16,0x1025, wrb,5  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb6,16,16,16,0x1026, wrb,6  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb7,16,16,16,0x1027, wrb,7  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb8,16,16,16,0x1028, wrb,8  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,           wrb9,16,16,16,0x1029, wrb,9  ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wrb10,16,16,16,0x102A, wrb,10 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wrb11,16,16,16,0x102B, wrb,11 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wrb12,16,16,16,0x102C, wrb,12 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wrb13,16,16,16,0x102D, wrb,13 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wrb14,16,16,16,0x102E, wrb,14 ,128,0,0,0) \
- XCHAL_SA_REG(s,0,0,2,0,          wrb15,16,16,16,0x102F, wrb,15 ,128,0,0,0)
-
-#define XCHAL_CP7_SA_NUM	0
-#define XCHAL_CP7_SA_LIST(s)	/* empty */
-
-/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
-#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8
-
-#endif /*_XTENSA_CORE_TIE_H*/
-
diff --git a/arch/xtensa/variants/s6000/irq.c b/arch/xtensa/variants/s6000/irq.c
deleted file mode 100644
index 81a241e..0000000
--- a/arch/xtensa/variants/s6000/irq.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * s6000 irq crossbar
- *
- * Copyright (c) 2009 emlix GmbH
- * Authors:	Johannes Weiner <hannes@cmpxchg.org>
- *		Oskar Schirmer <oskar@scara.com>
- */
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <variant/hardware.h>
-
-/* S6_REG_INTC */
-#define INTC_STATUS	0x000
-#define INTC_RAW	0x010
-#define INTC_STATUS_AG	0x100
-#define INTC_CFG(n)	(0x200 + 4 * (n))
-
-/*
- * The s6000 has a crossbar that multiplexes interrupt output lines
- * from the peripherals to input lines on the xtensa core.
- *
- * We leave the mapping decisions to the platform as it depends on the
- * actually connected peripherals which distribution makes sense.
- */
-extern const signed char *platform_irq_mappings[NR_IRQS];
-
-static unsigned long scp_to_intc_enable[] = {
-#define	TO_INTC_ENABLE(n)	(((n) << 1) + 1)
-	TO_INTC_ENABLE(0),
-	TO_INTC_ENABLE(1),
-	TO_INTC_ENABLE(2),
-	TO_INTC_ENABLE(3),
-	TO_INTC_ENABLE(4),
-	TO_INTC_ENABLE(5),
-	TO_INTC_ENABLE(6),
-	TO_INTC_ENABLE(7),
-	TO_INTC_ENABLE(8),
-	TO_INTC_ENABLE(9),
-	TO_INTC_ENABLE(10),
-	TO_INTC_ENABLE(11),
-	TO_INTC_ENABLE(12),
-	-1,
-	-1,
-	TO_INTC_ENABLE(13),
-	-1,
-	TO_INTC_ENABLE(14),
-	-1,
-	TO_INTC_ENABLE(15),
-#undef	TO_INTC_ENABLE
-};
-
-static void irq_set(unsigned int irq, int enable)
-{
-	unsigned long en;
-	const signed char *m = platform_irq_mappings[irq];
-
-	if (!m)
-		return;
-	en = enable ? scp_to_intc_enable[irq] : 0;
-	while (*m >= 0) {
-		writel(en, S6_REG_INTC + INTC_CFG(*m));
-		m++;
-	}
-}
-
-void variant_irq_enable(unsigned int irq)
-{
-	irq_set(irq, 1);
-}
-
-void variant_irq_disable(unsigned int irq)
-{
-	irq_set(irq, 0);
-}