[SCSI] move ULD attachment into the prep function
One of the intents of the block prep function was to allow ULDs to use
it for preprocessing. The original SCSI model was to have a single prep
function and add a pointer indirect filter to build the necessary
commands. This patch reverses that, does away with the init_command
field of the scsi_driver structure and makes ULDs attach directly to the
prep function instead. The value is really that it allows us to begin
to separate the ULDs from the SCSI mid layer (as long as they don't use
any core functions---which is hard at the moment---a ULD doesn't even
need SCSI to bind).
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 47d3cdd..94d82cb 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1039,9 +1039,6 @@
printk(KERN_ERR "req nr_sec %lu, cur_nr_sec %u\n", req->nr_sectors,
req->current_nr_sectors);
- /* release the command and kill it */
- scsi_release_buffers(cmd);
- scsi_put_command(cmd);
return BLKPREP_KILL;
}
@@ -1078,9 +1075,13 @@
scsi_io_completion(cmd, cmd->request_bufflen);
}
-static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
+int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
{
struct scsi_cmnd *cmd;
+ int ret = scsi_prep_state_check(sdev, req);
+
+ if (ret != BLKPREP_OK)
+ return ret;
cmd = scsi_get_cmd_from_req(sdev, req);
if (unlikely(!cmd))
@@ -1126,18 +1127,20 @@
cmd->done = scsi_blk_pc_done;
return BLKPREP_OK;
}
+EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd);
/*
* Setup a REQ_TYPE_FS command. These are simple read/write request
* from filesystems that still need to be translated to SCSI CDBs from
* the ULD.
*/
-static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
+int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
{
struct scsi_cmnd *cmd;
- struct scsi_driver *drv;
- int ret;
+ int ret = scsi_prep_state_check(sdev, req);
+ if (ret != BLKPREP_OK)
+ return ret;
/*
* Filesystem requests must transfer data.
*/
@@ -1147,26 +1150,12 @@
if (unlikely(!cmd))
return BLKPREP_DEFER;
- ret = scsi_init_io(cmd);
- if (unlikely(ret))
- return ret;
-
- /*
- * Initialize the actual SCSI command for this request.
- */
- drv = *(struct scsi_driver **)req->rq_disk->private_data;
- if (unlikely(!drv->init_command(cmd))) {
- scsi_release_buffers(cmd);
- scsi_put_command(cmd);
- return BLKPREP_KILL;
- }
-
- return BLKPREP_OK;
+ return scsi_init_io(cmd);
}
+EXPORT_SYMBOL(scsi_setup_fs_cmnd);
-static int scsi_prep_fn(struct request_queue *q, struct request *req)
+int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
{
- struct scsi_device *sdev = q->queuedata;
int ret = BLKPREP_OK;
/*
@@ -1212,35 +1201,25 @@
ret = BLKPREP_KILL;
break;
}
-
- if (ret != BLKPREP_OK)
- goto out;
}
+ return ret;
+}
+EXPORT_SYMBOL(scsi_prep_state_check);
- switch (req->cmd_type) {
- case REQ_TYPE_BLOCK_PC:
- ret = scsi_setup_blk_pc_cmnd(sdev, req);
- break;
- case REQ_TYPE_FS:
- ret = scsi_setup_fs_cmnd(sdev, req);
- break;
- default:
- /*
- * All other command types are not supported.
- *
- * Note that these days the SCSI subsystem does not use
- * REQ_TYPE_SPECIAL requests anymore. These are only used
- * (directly or via blk_insert_request) by non-SCSI drivers.
- */
- blk_dump_rq_flags(req, "SCSI bad req");
- ret = BLKPREP_KILL;
- break;
- }
+int scsi_prep_return(struct request_queue *q, struct request *req, int ret)
+{
+ struct scsi_device *sdev = q->queuedata;
- out:
switch (ret) {
case BLKPREP_KILL:
req->errors = DID_NO_CONNECT << 16;
+ /* release the command and kill it */
+ if (req->special) {
+ struct scsi_cmnd *cmd = req->special;
+ scsi_release_buffers(cmd);
+ scsi_put_command(cmd);
+ req->special = NULL;
+ }
break;
case BLKPREP_DEFER:
/*
@@ -1257,6 +1236,17 @@
return ret;
}
+EXPORT_SYMBOL(scsi_prep_return);
+
+static int scsi_prep_fn(struct request_queue *q, struct request *req)
+{
+ struct scsi_device *sdev = q->queuedata;
+ int ret = BLKPREP_KILL;
+
+ if (req->cmd_type == REQ_TYPE_BLOCK_PC)
+ ret = scsi_setup_blk_pc_cmnd(sdev, req);
+ return scsi_prep_return(q, req, ret);
+}
/*
* scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2c6116f..38a4141 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -240,7 +240,6 @@
.shutdown = sd_shutdown,
},
.rescan = sd_rescan,
- .init_command = sd_init_command,
};
/*
@@ -331,14 +330,31 @@
*
* Returns 1 if successful and 0 if error (or cannot be done now).
**/
-static int sd_init_command(struct scsi_cmnd * SCpnt)
+static int sd_prep_fn(struct request_queue *q, struct request *rq)
{
- struct scsi_device *sdp = SCpnt->device;
- struct request *rq = SCpnt->request;
+ struct scsi_cmnd *SCpnt;
+ struct scsi_device *sdp = q->queuedata;
struct gendisk *disk = rq->rq_disk;
sector_t block = rq->sector;
- unsigned int this_count = SCpnt->request_bufflen >> 9;
+ unsigned int this_count = rq->nr_sectors;
unsigned int timeout = sdp->timeout;
+ int ret;
+
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_type != REQ_TYPE_FS) {
+ ret = BLKPREP_KILL;
+ goto out;
+ }
+ ret = scsi_setup_fs_cmnd(sdp, rq);
+ if (ret != BLKPREP_OK)
+ goto out;
+ SCpnt = rq->special;
+
+ /* from here on until we're complete, any goto out
+ * is used for a killable error condition */
+ ret = BLKPREP_KILL;
SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
"sd_init_command: block=%llu, "
@@ -353,7 +369,7 @@
rq->nr_sectors));
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
"Retry with 0x%p\n", SCpnt));
- return 0;
+ goto out;
}
if (sdp->changed) {
@@ -362,8 +378,9 @@
* the changed bit has been reset
*/
/* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */
- return 0;
+ goto out;
}
+
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
(unsigned long long)block));
@@ -382,7 +399,7 @@
if ((block & 1) || (rq->nr_sectors & 1)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
- return 0;
+ goto out;
} else {
block = block >> 1;
this_count = this_count >> 1;
@@ -392,7 +409,7 @@
if ((block & 3) || (rq->nr_sectors & 3)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
- return 0;
+ goto out;
} else {
block = block >> 2;
this_count = this_count >> 2;
@@ -402,7 +419,7 @@
if ((block & 7) || (rq->nr_sectors & 7)) {
scmd_printk(KERN_ERR, SCpnt,
"Bad block number requested\n");
- return 0;
+ goto out;
} else {
block = block >> 3;
this_count = this_count >> 3;
@@ -410,7 +427,7 @@
}
if (rq_data_dir(rq) == WRITE) {
if (!sdp->writeable) {
- return 0;
+ goto out;
}
SCpnt->cmnd[0] = WRITE_6;
SCpnt->sc_data_direction = DMA_TO_DEVICE;
@@ -419,7 +436,7 @@
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
} else {
scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
- return 0;
+ goto out;
}
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
@@ -470,7 +487,7 @@
*/
scmd_printk(KERN_ERR, SCpnt,
"FUA write on READ/WRITE(6) drive\n");
- return 0;
+ goto out;
}
SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
@@ -501,7 +518,9 @@
* This indicates that the command is ready from our end to be
* queued.
*/
- return 1;
+ ret = BLKPREP_OK;
+ out:
+ return scsi_prep_return(q, rq, ret);
}
/**
@@ -1669,6 +1688,7 @@
sd_revalidate_disk(gd);
+ blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
blk_queue_issue_flush_fn(sdp->request_queue, sd_issue_flush);
gd->driverfs_dev = &sdp->sdev_gendev;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 902eb11..a0c4e13 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -78,7 +78,6 @@
static int sr_probe(struct device *);
static int sr_remove(struct device *);
-static int sr_init_command(struct scsi_cmnd *);
static struct scsi_driver sr_template = {
.owner = THIS_MODULE,
@@ -87,7 +86,6 @@
.probe = sr_probe,
.remove = sr_remove,
},
- .init_command = sr_init_command,
};
static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
@@ -296,19 +294,39 @@
scsi_io_completion(SCpnt, good_bytes);
}
-static int sr_init_command(struct scsi_cmnd * SCpnt)
+static int sr_prep_fn(struct request_queue *q, struct request *rq)
{
int block=0, this_count, s_size, timeout = SR_TIMEOUT;
- struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
+ struct scsi_cd *cd;
+ struct scsi_cmnd *SCpnt;
+ struct scsi_device *sdp = q->queuedata;
+ int ret;
+
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_type != REQ_TYPE_FS) {
+ ret = BLKPREP_KILL;
+ goto out;
+ }
+ ret = scsi_setup_fs_cmnd(sdp, rq);
+ if (ret != BLKPREP_OK)
+ goto out;
+ SCpnt = rq->special;
+ cd = scsi_cd(rq->rq_disk);
+
+ /* from here on until we're complete, any goto out
+ * is used for a killable error condition */
+ ret = BLKPREP_KILL;
SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n",
cd->disk->disk_name, block));
if (!cd->device || !scsi_device_online(cd->device)) {
SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
- SCpnt->request->nr_sectors));
+ rq->nr_sectors));
SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
- return 0;
+ goto out;
}
if (cd->device->changed) {
@@ -316,7 +334,7 @@
* quietly refuse to do anything to a changed disc until the
* changed bit has been reset
*/
- return 0;
+ goto out;
}
/*
@@ -333,21 +351,21 @@
if (s_size != 512 && s_size != 1024 && s_size != 2048) {
scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size);
- return 0;
+ goto out;
}
- if (rq_data_dir(SCpnt->request) == WRITE) {
+ if (rq_data_dir(rq) == WRITE) {
if (!cd->device->writeable)
- return 0;
+ goto out;
SCpnt->cmnd[0] = WRITE_10;
SCpnt->sc_data_direction = DMA_TO_DEVICE;
cd->cdi.media_written = 1;
- } else if (rq_data_dir(SCpnt->request) == READ) {
+ } else if (rq_data_dir(rq) == READ) {
SCpnt->cmnd[0] = READ_10;
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
} else {
- blk_dump_rq_flags(SCpnt->request, "Unknown sr command");
- return 0;
+ blk_dump_rq_flags(rq, "Unknown sr command");
+ goto out;
}
{
@@ -368,10 +386,10 @@
/*
* request doesn't start on hw block boundary, add scatter pads
*/
- if (((unsigned int)SCpnt->request->sector % (s_size >> 9)) ||
+ if (((unsigned int)rq->sector % (s_size >> 9)) ||
(SCpnt->request_bufflen % s_size)) {
scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
- return 0;
+ goto out;
}
this_count = (SCpnt->request_bufflen >> 9) / (s_size >> 9);
@@ -379,12 +397,12 @@
SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
cd->cdi.name,
- (rq_data_dir(SCpnt->request) == WRITE) ?
+ (rq_data_dir(rq) == WRITE) ?
"writing" : "reading",
- this_count, SCpnt->request->nr_sectors));
+ this_count, rq->nr_sectors));
SCpnt->cmnd[1] = 0;
- block = (unsigned int)SCpnt->request->sector / (s_size >> 9);
+ block = (unsigned int)rq->sector / (s_size >> 9);
if (this_count > 0xffff) {
this_count = 0xffff;
@@ -419,7 +437,9 @@
* This indicates that the command is ready from our end to be
* queued.
*/
- return 1;
+ ret = BLKPREP_OK;
+ out:
+ return scsi_prep_return(q, rq, ret);
}
static int sr_block_open(struct inode *inode, struct file *file)
@@ -590,6 +610,7 @@
/* FIXME: need to handle a get_capabilities failure properly ?? */
get_capabilities(cd);
+ blk_queue_prep_rq(sdev->request_queue, sr_prep_fn);
sr_vendor_init(cd);
disk->driverfs_dev = &sdev->sdev_gendev;