diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c
new file mode 100644
index 0000000..6139512
--- /dev/null
+++ b/drivers/pwm/pwm-stm32.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright (C) STMicroelectronics 2016
+ *
+ * Author: Gerald Baeza <gerald.baeza@st.com>
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Inspired by timer-stm32.c from Maxime Coquelin
+ *             pwm-atmel.c from Bo Shen
+ */
+
+#include <linux/mfd/stm32-timers.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+#define CCMR_CHANNEL_SHIFT 8
+#define CCMR_CHANNEL_MASK  0xFF
+#define MAX_BREAKINPUT 2
+
+struct stm32_pwm {
+	struct pwm_chip chip;
+	struct device *dev;
+	struct clk *clk;
+	struct regmap *regmap;
+	u32 max_arr;
+	bool have_complementary_output;
+};
+
+struct stm32_breakinput {
+	u32 index;
+	u32 level;
+	u32 filter;
+};
+
+static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip)
+{
+	return container_of(chip, struct stm32_pwm, chip);
+}
+
+static u32 active_channels(struct stm32_pwm *dev)
+{
+	u32 ccer;
+
+	regmap_read(dev->regmap, TIM_CCER, &ccer);
+
+	return ccer & TIM_CCER_CCXE;
+}
+
+static int write_ccrx(struct stm32_pwm *dev, int ch, u32 value)
+{
+	switch (ch) {
+	case 0:
+		return regmap_write(dev->regmap, TIM_CCR1, value);
+	case 1:
+		return regmap_write(dev->regmap, TIM_CCR2, value);
+	case 2:
+		return regmap_write(dev->regmap, TIM_CCR3, value);
+	case 3:
+		return regmap_write(dev->regmap, TIM_CCR4, value);
+	}
+	return -EINVAL;
+}
+
+static int stm32_pwm_config(struct stm32_pwm *priv, int ch,
+			    int duty_ns, int period_ns)
+{
+	unsigned long long prd, div, dty;
+	unsigned int prescaler = 0;
+	u32 ccmr, mask, shift;
+
+	/* Period and prescaler values depends on clock rate */
+	div = (unsigned long long)clk_get_rate(priv->clk) * period_ns;
+
+	do_div(div, NSEC_PER_SEC);
+	prd = div;
+
+	while (div > priv->max_arr) {
+		prescaler++;
+		div = prd;
+		do_div(div, prescaler + 1);
+	}
+
+	prd = div;
+
+	if (prescaler > MAX_TIM_PSC)
+		return -EINVAL;
+
+	/*
+	 * All channels share the same prescaler and counter so when two
+	 * channels are active at the same time we can't change them
+	 */
+	if (active_channels(priv) & ~(1 << ch * 4)) {
+		u32 psc, arr;
+
+		regmap_read(priv->regmap, TIM_PSC, &psc);
+		regmap_read(priv->regmap, TIM_ARR, &arr);
+
+		if ((psc != prescaler) || (arr != prd - 1))
+			return -EBUSY;
+	}
+
+	regmap_write(priv->regmap, TIM_PSC, prescaler);
+	regmap_write(priv->regmap, TIM_ARR, prd - 1);
+	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE);
+
+	/* Calculate the duty cycles */
+	dty = prd * duty_ns;
+	do_div(dty, period_ns);
+
+	write_ccrx(priv, ch, dty);
+
+	/* Configure output mode */
+	shift = (ch & 0x1) * CCMR_CHANNEL_SHIFT;
+	ccmr = (TIM_CCMR_PE | TIM_CCMR_M1) << shift;
+	mask = CCMR_CHANNEL_MASK << shift;
+
+	if (ch < 2)
+		regmap_update_bits(priv->regmap, TIM_CCMR1, mask, ccmr);
+	else
+		regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr);
+
+	regmap_update_bits(priv->regmap, TIM_BDTR,
+			   TIM_BDTR_MOE | TIM_BDTR_AOE,
+			   TIM_BDTR_MOE | TIM_BDTR_AOE);
+
+	return 0;
+}
+
+static int stm32_pwm_set_polarity(struct stm32_pwm *priv, int ch,
+				  enum pwm_polarity polarity)
+{
+	u32 mask;
+
+	mask = TIM_CCER_CC1P << (ch * 4);
+	if (priv->have_complementary_output)
+		mask |= TIM_CCER_CC1NP << (ch * 4);
+
+	regmap_update_bits(priv->regmap, TIM_CCER, mask,
+			   polarity == PWM_POLARITY_NORMAL ? 0 : mask);
+
+	return 0;
+}
+
+static int stm32_pwm_enable(struct stm32_pwm *priv, int ch)
+{
+	u32 mask;
+	int ret;
+
+	ret = clk_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	/* Enable channel */
+	mask = TIM_CCER_CC1E << (ch * 4);
+	if (priv->have_complementary_output)
+		mask |= TIM_CCER_CC1NE << (ch * 4);
+
+	regmap_update_bits(priv->regmap, TIM_CCER, mask, mask);
+
+	/* Make sure that registers are updated */
+	regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
+
+	/* Enable controller */
+	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN);
+
+	return 0;
+}
+
+static void stm32_pwm_disable(struct stm32_pwm *priv, int ch)
+{
+	u32 mask;
+
+	/* Disable channel */
+	mask = TIM_CCER_CC1E << (ch * 4);
+	if (priv->have_complementary_output)
+		mask |= TIM_CCER_CC1NE << (ch * 4);
+
+	regmap_update_bits(priv->regmap, TIM_CCER, mask, 0);
+
+	/* When all channels are disabled, we can disable the controller */
+	if (!active_channels(priv))
+		regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
+
+	clk_disable(priv->clk);
+}
+
+static int stm32_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   struct pwm_state *state)
+{
+	bool enabled;
+	struct stm32_pwm *priv = to_stm32_pwm_dev(chip);
+	int ret;
+
+	enabled = pwm->state.enabled;
+
+	if (enabled && !state->enabled) {
+		stm32_pwm_disable(priv, pwm->hwpwm);
+		return 0;
+	}
+
+	if (state->polarity != pwm->state.polarity)
+		stm32_pwm_set_polarity(priv, pwm->hwpwm, state->polarity);
+
+	ret = stm32_pwm_config(priv, pwm->hwpwm,
+			       state->duty_cycle, state->period);
+	if (ret)
+		return ret;
+
+	if (!enabled && state->enabled)
+		ret = stm32_pwm_enable(priv, pwm->hwpwm);
+
+	return ret;
+}
+
+static const struct pwm_ops stm32pwm_ops = {
+	.owner = THIS_MODULE,
+	.apply = stm32_pwm_apply,
+};
+
+static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
+				    int index, int level, int filter)
+{
+	u32 bke = (index == 0) ? TIM_BDTR_BKE : TIM_BDTR_BK2E;
+	int shift = (index == 0) ? TIM_BDTR_BKF_SHIFT : TIM_BDTR_BK2F_SHIFT;
+	u32 mask = (index == 0) ? TIM_BDTR_BKE | TIM_BDTR_BKP | TIM_BDTR_BKF
+				: TIM_BDTR_BK2E | TIM_BDTR_BK2P | TIM_BDTR_BK2F;
+	u32 bdtr = bke;
+
+	/*
+	 * The both bits could be set since only one will be wrote
+	 * due to mask value.
+	 */
+	if (level)
+		bdtr |= TIM_BDTR_BKP | TIM_BDTR_BK2P;
+
+	bdtr |= (filter & TIM_BDTR_BKF_MASK) << shift;
+
+	regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr);
+
+	regmap_read(priv->regmap, TIM_BDTR, &bdtr);
+
+	return (bdtr & bke) ? 0 : -EINVAL;
+}
+
+static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
+				       struct device_node *np)
+{
+	struct stm32_breakinput breakinput[MAX_BREAKINPUT];
+	int nb, ret, i, array_size;
+
+	nb = of_property_count_elems_of_size(np, "st,breakinput",
+					     sizeof(struct stm32_breakinput));
+
+	/*
+	 * Because "st,breakinput" parameter is optional do not make probe
+	 * failed if it doesn't exist.
+	 */
+	if (nb <= 0)
+		return 0;
+
+	if (nb > MAX_BREAKINPUT)
+		return -EINVAL;
+
+	array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32);
+	ret = of_property_read_u32_array(np, "st,breakinput",
+					 (u32 *)breakinput, array_size);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nb && !ret; i++) {
+		ret = stm32_pwm_set_breakinput(priv,
+					       breakinput[i].index,
+					       breakinput[i].level,
+					       breakinput[i].filter);
+	}
+
+	return ret;
+}
+
+static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
+{
+	u32 ccer;
+
+	/*
+	 * If complementary bit doesn't exist writing 1 will have no
+	 * effect so we can detect it.
+	 */
+	regmap_update_bits(priv->regmap,
+			   TIM_CCER, TIM_CCER_CC1NE, TIM_CCER_CC1NE);
+	regmap_read(priv->regmap, TIM_CCER, &ccer);
+	regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE, 0);
+
+	priv->have_complementary_output = (ccer != 0);
+}
+
+static int stm32_pwm_detect_channels(struct stm32_pwm *priv)
+{
+	u32 ccer;
+	int npwm = 0;
+
+	/*
+	 * If channels enable bits don't exist writing 1 will have no
+	 * effect so we can detect and count them.
+	 */
+	regmap_update_bits(priv->regmap,
+			   TIM_CCER, TIM_CCER_CCXE, TIM_CCER_CCXE);
+	regmap_read(priv->regmap, TIM_CCER, &ccer);
+	regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE, 0);
+
+	if (ccer & TIM_CCER_CC1E)
+		npwm++;
+
+	if (ccer & TIM_CCER_CC2E)
+		npwm++;
+
+	if (ccer & TIM_CCER_CC3E)
+		npwm++;
+
+	if (ccer & TIM_CCER_CC4E)
+		npwm++;
+
+	return npwm;
+}
+
+static int stm32_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent);
+	struct stm32_pwm *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = ddata->regmap;
+	priv->clk = ddata->clk;
+	priv->max_arr = ddata->max_arr;
+
+	if (!priv->regmap || !priv->clk)
+		return -EINVAL;
+
+	ret = stm32_pwm_apply_breakinputs(priv, np);
+	if (ret)
+		return ret;
+
+	stm32_pwm_detect_complementary(priv);
+
+	priv->chip.base = -1;
+	priv->chip.dev = dev;
+	priv->chip.ops = &stm32pwm_ops;
+	priv->chip.npwm = stm32_pwm_detect_channels(priv);
+
+	ret = pwmchip_add(&priv->chip);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int stm32_pwm_remove(struct platform_device *pdev)
+{
+	struct stm32_pwm *priv = platform_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < priv->chip.npwm; i++)
+		pwm_disable(&priv->chip.pwms[i]);
+
+	pwmchip_remove(&priv->chip);
+
+	return 0;
+}
+
+static const struct of_device_id stm32_pwm_of_match[] = {
+	{ .compatible = "st,stm32-pwm",	},
+	{ /* end node */ },
+};
+MODULE_DEVICE_TABLE(of, stm32_pwm_of_match);
+
+static struct platform_driver stm32_pwm_driver = {
+	.probe	= stm32_pwm_probe,
+	.remove	= stm32_pwm_remove,
+	.driver	= {
+		.name = "stm32-pwm",
+		.of_match_table = stm32_pwm_of_match,
+	},
+};
+module_platform_driver(stm32_pwm_driver);
+
+MODULE_ALIAS("platform:stm32-pwm");
+MODULE_DESCRIPTION("STMicroelectronics STM32 PWM driver");
+MODULE_LICENSE("GPL v2");