mac80211: use channel contexts
Instead of operating on a single channel only,
use the new channel context infrastructure in
all mac80211 code.
This enables drivers that want to use the new
channel context infrastructure to use multiple
channels, while nothing should change for all
the other drivers that don't support it.
Right now this disables both TX power settings
and spatial multiplexing powersave. Both need
to be re-enabled on a channel context basis.
Additionally, when channel contexts are used
drop the connection when channel switch is
received rather than trying to handle it. This
will have to be improved later.
[With fixes from Eliad and Emmanuel incorporated]
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 5f3620f..34d9235 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -26,7 +26,6 @@
#include "rate.h"
#define IEEE80211_SCAN_INTERVAL (2 * HZ)
-#define IEEE80211_SCAN_INTERVAL_SLOW (15 * HZ)
#define IEEE80211_IBSS_JOIN_TIMEOUT (7 * HZ)
#define IEEE80211_IBSS_MERGE_INTERVAL (30 * HZ)
@@ -76,21 +75,22 @@
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IBSS);
}
- memcpy(ifibss->bssid, bssid, ETH_ALEN);
-
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- local->oper_channel = chan;
channel_type = ifibss->channel_type;
if (!cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type))
channel_type = NL80211_CHAN_HT20;
- if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
- /* can only fail due to HT40+/- mismatch */
- channel_type = NL80211_CHAN_HT20;
- WARN_ON(!ieee80211_set_channel_type(local, sdata,
- NL80211_CHAN_HT20));
+
+ ieee80211_vif_release_channel(sdata);
+ if (ieee80211_vif_use_channel(sdata, chan, channel_type,
+ ifibss->fixed_channel ?
+ IEEE80211_CHANCTX_SHARED :
+ IEEE80211_CHANCTX_EXCLUSIVE)) {
+ sdata_info(sdata, "Failed to join IBSS, no channel context\n");
+ return;
}
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+
+ memcpy(ifibss->bssid, bssid, ETH_ALEN);
sband = local->hw.wiphy->bands[chan->band];
@@ -294,7 +294,8 @@
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- int band = local->oper_channel->band;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ int band;
/*
* XXX: Consider removing the least recently used entry and
@@ -317,6 +318,13 @@
return NULL;
}
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (WARN_ON_ONCE(!chanctx_conf))
+ return NULL;
+ band = chanctx_conf->channel->band;
+ rcu_read_unlock();
+
sta = sta_info_alloc(sdata, addr, GFP_KERNEL);
if (!sta) {
rcu_read_lock();
@@ -517,7 +525,8 @@
goto put_bss;
/* different channel */
- if (cbss->channel != local->oper_channel)
+ if (sdata->u.ibss.fixed_channel &&
+ sdata->u.ibss.channel != cbss->channel)
goto put_bss;
/* different SSID */
@@ -592,7 +601,8 @@
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- int band = local->oper_channel->band;
+ struct ieee80211_chanctx_conf *chanctx_conf;
+ int band;
/*
* XXX: Consider removing the least recently used entry and
@@ -610,6 +620,15 @@
if (!ether_addr_equal(bssid, sdata->u.ibss.bssid))
return;
+ rcu_read_lock();
+ chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+ if (WARN_ON_ONCE(!chanctx_conf)) {
+ rcu_read_unlock();
+ return;
+ }
+ band = chanctx_conf->channel->band;
+ rcu_read_unlock();
+
sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
if (!sta)
return;
@@ -784,18 +803,8 @@
int interval = IEEE80211_SCAN_INTERVAL;
if (time_after(jiffies, ifibss->ibss_join_req +
- IEEE80211_IBSS_JOIN_TIMEOUT)) {
- if (!(local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)) {
- ieee80211_sta_create_ibss(sdata);
- return;
- }
- sdata_info(sdata, "IBSS not allowed on %d MHz\n",
- local->oper_channel->center_freq);
-
- /* No IBSS found - decrease scan interval and continue
- * scanning. */
- interval = IEEE80211_SCAN_INTERVAL_SLOW;
- }
+ IEEE80211_IBSS_JOIN_TIMEOUT))
+ ieee80211_sta_create_ibss(sdata);
mod_timer(&ifibss->timer,
round_jiffies(jiffies + interval));
@@ -1086,17 +1095,6 @@
sdata->u.ibss.channel_type = params->channel_type;
sdata->u.ibss.fixed_channel = params->channel_fixed;
- /* fix ourselves to that channel now already */
- if (params->channel_fixed) {
- sdata->local->oper_channel = params->channel;
- if (!ieee80211_set_channel_type(sdata->local, sdata,
- params->channel_type)) {
- mutex_unlock(&sdata->u.ibss.mtx);
- kfree_skb(skb);
- return -EINVAL;
- }
- }
-
if (params->ie) {
sdata->u.ibss.ie = kmemdup(params->ie, params->ie_len,
GFP_KERNEL);