Merge branch 'for-2.6.34' into for-2.6.35
Conflicts due to context changes next to the backported DMA data change:
include/sound/soc.h
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 80dfac1..4ab3dad 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -381,7 +381,7 @@
unsigned int rate_max; /* max rate */
unsigned int channels_min; /* min channels */
unsigned int channels_max; /* max channels */
- unsigned int active; /* num of active users of the stream */
+ unsigned int active; /* stream is in use */
void *dma_data; /* used by platform code */
};
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index fc3dce8..e00201e 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3015,34 +3015,39 @@
break;
case SND_SOC_BIAS_OFF:
- /* Switch over to startup biases */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
- WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- WM8994_VMID_RAMP_MASK,
- WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- (1 << WM8994_VMID_RAMP_SHIFT));
+ if (codec->bias_level == SND_SOC_BIAS_STANDBY) {
+ /* Switch over to startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ (1 << WM8994_VMID_RAMP_SHIFT));
- /* Disable main biases */
- snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
- WM8994_BIAS_ENA | WM8994_VMID_SEL_MASK, 0);
+ /* Disable main biases */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_BIAS_ENA |
+ WM8994_VMID_SEL_MASK, 0);
- /* Discharge line */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
- WM8994_LINEOUT1_DISCH |
- WM8994_LINEOUT2_DISCH,
- WM8994_LINEOUT1_DISCH |
- WM8994_LINEOUT2_DISCH);
+ /* Discharge line */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH);
- msleep(5);
+ msleep(5);
- /* Switch off startup biases */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
- WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- WM8994_VMID_RAMP_MASK, 0);
-
+ /* Switch off startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK, 0);
+ }
break;
}
codec->bias_level = level;
@@ -3866,11 +3871,12 @@
case 3:
wm8994->hubs.dcs_codes = -5;
wm8994->hubs.hp_startup_mode = 1;
+ wm8994->hubs.dcs_readback_mode = 1;
break;
default:
+ wm8994->hubs.dcs_readback_mode = 1;
break;
}
-
ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_MIC1_DET,
wm8994_mic_irq, "Mic 1 detect", wm8994);
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 486bdd2..e1f225a 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -62,21 +62,27 @@
static const struct soc_enum speaker_mode =
SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text);
-static void wait_for_dc_servo(struct snd_soc_codec *codec)
+static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op)
{
unsigned int reg;
int count = 0;
+ unsigned int val;
+
+ val = op | WM8993_DCS_ENA_CHAN_0 | WM8993_DCS_ENA_CHAN_1;
+
+ /* Trigger the command */
+ snd_soc_write(codec, WM8993_DC_SERVO_0, val);
dev_dbg(codec->dev, "Waiting for DC servo...\n");
do {
count++;
msleep(1);
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0);
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_0);
dev_dbg(codec->dev, "DC servo: %x\n", reg);
- } while (reg & WM8993_DCS_DATAPATH_BUSY && count < 400);
+ } while (reg & op && count < 400);
- if (reg & WM8993_DCS_DATAPATH_BUSY)
+ if (reg & op)
dev_err(codec->dev, "Timed out waiting for DC Servo\n");
}
@@ -86,51 +92,58 @@
static void calibrate_dc_servo(struct snd_soc_codec *codec)
{
struct wm_hubs_data *hubs = codec->private_data;
- u16 reg, dcs_cfg;
+ u16 reg, reg_l, reg_r, dcs_cfg;
/* Set for 32 series updates */
snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
WM8993_DCS_SERIES_NO_01_MASK,
32 << WM8993_DCS_SERIES_NO_01_SHIFT);
-
- /* Enable the DC servo. Write all bits to avoid triggering startup
- * or write calibration.
- */
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- 0xFFFF,
- WM8993_DCS_ENA_CHAN_0 |
- WM8993_DCS_ENA_CHAN_1 |
- WM8993_DCS_TRIG_SERIES_1 |
- WM8993_DCS_TRIG_SERIES_0);
-
- wait_for_dc_servo(codec);
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_SERIES_0 | WM8993_DCS_TRIG_SERIES_1);
/* Apply correction to DC servo result */
if (hubs->dcs_codes) {
dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
hubs->dcs_codes);
+ /* Different chips in the family support different
+ * readback methods.
+ */
+ switch (hubs->dcs_readback_mode) {
+ case 0:
+ reg_l = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1)
+ & WM8993_DCS_INTEG_CHAN_0_MASK;;
+ reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
+ & WM8993_DCS_INTEG_CHAN_1_MASK;
+ break;
+ case 1:
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+ reg_l = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
+ >> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+ reg_r = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
+ break;
+ default:
+ WARN(1, "Unknown DCS readback method");
+ break;
+ }
+
/* HPOUT1L */
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) &
- WM8993_DCS_INTEG_CHAN_0_MASK;;
- reg += hubs->dcs_codes;
- dcs_cfg = reg << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+ if (reg_l + hubs->dcs_codes > 0 &&
+ reg_l + hubs->dcs_codes < 0xff)
+ reg_l += hubs->dcs_codes;
+ dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
/* HPOUT1R */
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) &
- WM8993_DCS_INTEG_CHAN_1_MASK;
- reg += hubs->dcs_codes;
- dcs_cfg |= reg;
+ if (reg_r + hubs->dcs_codes > 0 &&
+ reg_r + hubs->dcs_codes < 0xff)
+ reg_r += hubs->dcs_codes;
+ dcs_cfg |= reg_r;
/* Do it */
snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- WM8993_DCS_TRIG_DAC_WR_0 |
- WM8993_DCS_TRIG_DAC_WR_1,
- WM8993_DCS_TRIG_DAC_WR_0 |
- WM8993_DCS_TRIG_DAC_WR_1);
-
- wait_for_dc_servo(codec);
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_DAC_WR_0 |
+ WM8993_DCS_TRIG_DAC_WR_1);
}
}
@@ -141,10 +154,16 @@
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm_hubs_data *hubs = codec->private_data;
int ret;
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ /* If we're applying an offset correction then updating the
+ * callibration would be likely to introduce further offsets. */
+ if (hubs->dcs_codes)
+ return ret;
+
/* Only need to do this if the outputs are active */
if (snd_soc_read(codec, WM8993_POWER_MANAGEMENT_1)
& (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))
diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h
index 420104f..e51c166 100644
--- a/sound/soc/codecs/wm_hubs.h
+++ b/sound/soc/codecs/wm_hubs.h
@@ -21,6 +21,7 @@
/* This *must* be the first element of the codec->private_data struct */
struct wm_hubs_data {
int dcs_codes;
+ int dcs_readback_mode;
int hp_startup_mode;
};
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 39538c0..3945644 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -60,12 +60,11 @@
struct omap_runtime_data *prtd = runtime->private_data;
unsigned long flags;
- if ((cpu_is_omap1510()) &&
- (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)) {
+ if ((cpu_is_omap1510())) {
/*
* OMAP1510 doesn't fully support DMA progress counter
* and there is no software emulation implemented yet,
- * so have to maintain our own playback progress counter
+ * so have to maintain our own progress counters
* that can be used by omap_pcm_pointer() instead.
*/
spin_lock_irqsave(&prtd->lock, flags);
@@ -191,8 +190,7 @@
dma_params.frame_count = runtime->periods;
omap_set_dma_params(prtd->dma_ch, &dma_params);
- if ((cpu_is_omap1510()) &&
- (substream->stream == SNDRV_PCM_STREAM_PLAYBACK))
+ if ((cpu_is_omap1510()))
omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
else
@@ -250,14 +248,15 @@
dma_addr_t ptr;
snd_pcm_uframes_t offset;
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ if (cpu_is_omap1510()) {
+ offset = prtd->period_index * runtime->period_size;
+ } else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
ptr = omap_get_dma_dst_pos(prtd->dma_ch);
offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
- } else if (!(cpu_is_omap1510())) {
+ } else {
ptr = omap_get_dma_src_pos(prtd->dma_ch);
offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
- } else
- offset = prtd->period_index * runtime->period_size;
+ }
if (offset >= runtime->buffer_size)
offset = 0;