| /* |
| * LED driver for Samsung S2MPB02 |
| * |
| * Copyright (C) 2014 Samsung Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This driver is based on leds-max77804.c |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/leds.h> |
| #include <linux/workqueue.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/mfd/samsung/s2mpb02.h> |
| #include <linux/mfd/samsung/s2mpb02-regulator.h> |
| #include <linux/leds-s2mpb02.h> |
| #include <linux/mfd/samsung/s2mpb02-regulator.h> |
| #include <linux/mfd/samsung/s2mpb02.h> |
| #include <linux/ctype.h> |
| #include <linux/of_gpio.h> |
| |
| extern struct class *camera_class; /*sys/class/camera*/ |
| struct device *camera_flash_dev; |
| struct s2mpb02_led_data *global_led_datas[S2MPB02_LED_MAX]; |
| |
| struct s2mpb02_led_data { |
| struct led_classdev led; |
| struct s2mpb02_dev *s2mpb02; |
| struct s2mpb02_led *data; |
| struct i2c_client *i2c; |
| struct work_struct work; |
| struct mutex lock; |
| spinlock_t value_lock; |
| int brightness; |
| int test_brightness; |
| }; |
| |
| static u8 leds_mask[S2MPB02_LED_MAX] = { |
| S2MPB02_FLASH_MASK, |
| S2MPB02_TORCH_MASK, |
| S2MPB02_TORCH_MASK, |
| }; |
| |
| static u8 leds_shift[S2MPB02_LED_MAX] = { |
| 4, |
| 0, |
| 0, |
| }; |
| |
| u32 flash1_gpio; |
| u32 torch1_gpio; |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| u32 flash2_gpio; |
| u32 torch2_gpio; |
| #endif |
| enum s2mpb02_torch_current brightness_torch; |
| bool flash_config_factory; |
| u32 original_brightness[S2MPB02_LED_MAX]; |
| |
| static int s2mpb02_set_bits(struct i2c_client *client, const u8 reg, |
| const u8 mask, const u8 inval) |
| { |
| int ret; |
| u8 value; |
| |
| ret = s2mpb02_read_reg(client, reg, &value); |
| if (unlikely(ret < 0)) |
| return ret; |
| |
| value = (value & ~mask) | (inval & mask); |
| |
| ret = s2mpb02_write_reg(client, reg, value); |
| |
| return ret; |
| } |
| |
| static int s2mpb02_led_get_en_value(struct s2mpb02_led_data *led_data, int on) |
| { |
| if (on) { |
| if (led_data->data->id == S2MPB02_FLASH_LED_1) { |
| return ((S2MPB02_FLED_ENABLE << S2MPB02_FLED_ENABLE_SHIFT) | |
| (S2MPB02_FLED_FLASH_MODE << S2MPB02_FLED_MODE_SHIFT)); |
| /* Turn on FLASH by I2C */ |
| } else if (led_data->data->id == S2MPB02_TORCH_LED_2) { |
| return S2MPB02_FLED2_TORCH_ON; |
| /* Turn on TORCH by I2C */ |
| } else { |
| return ((S2MPB02_FLED_ENABLE << S2MPB02_FLED_ENABLE_SHIFT) | |
| (S2MPB02_FLED_TORCH_MODE << S2MPB02_FLED_MODE_SHIFT)); |
| /* Turn on TORCH by I2C */ |
| } |
| } else { |
| return (S2MPB02_FLED_DISABLE << S2MPB02_FLED_ENABLE_SHIFT); |
| /* controlled by GPIO */ |
| } |
| } |
| |
| static void s2mpb02_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| #if 0 /* disable LED control by other sysfs */ |
| unsigned long flags; |
| struct s2mpb02_led_data *led_data |
| = container_of(led_cdev, struct s2mpb02_led_data, led); |
| |
| pr_debug("[LED] %s\n", __func__); |
| |
| spin_lock_irqsave(&led_data->value_lock, flags); |
| led_data->data->brightness = min((int)value, S2MPB02_FLASH_TORCH_CURRENT_MAX); |
| spin_unlock_irqrestore(&led_data->value_lock, flags); |
| |
| schedule_work(&led_data->work); |
| #endif |
| } |
| |
| static void led_set(struct s2mpb02_led_data *led_data, int turn_way) |
| { |
| int ret; |
| struct s2mpb02_led *data = led_data->data; |
| int id = data->id; |
| int value; |
| u8 reg; |
| u8 mask; |
| |
| if (turn_way == S2MPB02_LED_TURN_WAY_GPIO) { |
| /* Turn way LED by GPIO */ |
| value = s2mpb02_led_get_en_value(led_data, 0); |
| if ((id == S2MPB02_FLASH_LED_1) || (id == S2MPB02_TORCH_LED_1)) { |
| reg = S2MPB02_REG_FLED_CTRL1; |
| mask = S2MPB02_FLED_ENABLE_MODE_MASK; |
| } else { |
| reg = S2MPB02_REG_FLED_CTRL2; |
| mask = S2MPB02_FLED2_ENABLE_MODE_MASK; |
| } |
| ret = s2mpb02_set_bits(led_data->i2c, id, mask, value); |
| if (unlikely(ret)) |
| goto error_set_bits; |
| |
| if (led_data->data->brightness == LED_OFF) { |
| if ((id == S2MPB02_FLASH_LED_1) || (id == S2MPB02_TORCH_LED_1)) { |
| reg = S2MPB02_REG_FLED_CUR1; |
| } else { |
| reg = S2MPB02_REG_FLED_CUR2; |
| } |
| /* set current */ |
| ret = s2mpb02_set_bits(led_data->i2c, reg, |
| leds_mask[id], data->brightness << leds_shift[id]); |
| if (unlikely(ret)) |
| goto error_set_bits; |
| |
| gpio_request(flash1_gpio, NULL); |
| gpio_request(torch1_gpio, NULL); |
| gpio_direction_output(flash1_gpio, 0); |
| gpio_direction_output(torch1_gpio, 0); |
| gpio_free(flash1_gpio); |
| gpio_free(torch1_gpio); |
| |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| gpio_request(flash2_gpio, NULL); |
| gpio_request(torch2_gpio, NULL); |
| gpio_direction_output(flash2_gpio, 0); |
| gpio_direction_output(torch2_gpio, 0); |
| gpio_free(flash1_gpio); |
| gpio_free(torch2_gpio); |
| #endif |
| } else { |
| if ((id == S2MPB02_FLASH_LED_1) || (id == S2MPB02_TORCH_LED_1)) { |
| reg = S2MPB02_REG_FLED_CUR1; |
| } else { |
| reg = S2MPB02_REG_FLED_CUR2; |
| } |
| /* set current */ |
| ret = s2mpb02_set_bits(led_data->i2c, reg, |
| leds_mask[id], data->brightness << leds_shift[id]); |
| if (unlikely(ret)) |
| goto error_set_bits; |
| |
| if (id == S2MPB02_FLASH_LED_1) { |
| gpio_request(flash1_gpio, NULL); |
| gpio_request(torch1_gpio, NULL); |
| gpio_direction_output(flash1_gpio, 1); |
| gpio_direction_output(torch1_gpio, 0); |
| gpio_free(flash1_gpio); |
| gpio_free(torch1_gpio); |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| gpio_request(flash2_gpio, NULL); |
| gpio_request(torch2_gpio, NULL); |
| gpio_direction_output(flash2_gpio, 0); |
| gpio_direction_output(torch2_gpio, 0); |
| gpio_free(flash1_gpio); |
| gpio_free(torch2_gpio); |
| #endif |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| } else if (id == S2MPB02_TORCH_LED_2) { |
| gpio_request(flash1_gpio, NULL); |
| gpio_request(torch1_gpio, NULL); |
| gpio_request(flash2_gpio, NULL); |
| gpio_request(torch2_gpio, NULL); |
| gpio_direction_output(flash1_gpio, 0); |
| gpio_direction_output(torch1_gpio, 0); |
| gpio_direction_output(flash2_gpio, 0); |
| gpio_direction_output(torch2_gpio, 1); |
| gpio_free(flash1_gpio); |
| gpio_free(torch1_gpio); |
| gpio_free(flash2_gpio); |
| gpio_free(torch2_gpio); |
| #endif |
| } else { /* S2MPB02_TORCH_LED_1 */ |
| gpio_request(flash1_gpio, NULL); |
| gpio_request(torch1_gpio, NULL); |
| gpio_direction_output(flash1_gpio, 0); |
| gpio_direction_output(torch1_gpio, 1); |
| gpio_free(flash1_gpio); |
| gpio_free(torch1_gpio); |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| gpio_request(flash2_gpio, NULL); |
| gpio_request(torch2_gpio, NULL); |
| gpio_direction_output(flash2_gpio, 0); |
| gpio_direction_output(torch2_gpio, 0); |
| gpio_free(flash1_gpio); |
| gpio_free(torch2_gpio); |
| #endif |
| } |
| } |
| } else { /* (turn_way == S2MPB02_LED_TURN_WAY_I2C) */ |
| if (led_data->data->brightness == LED_OFF) { |
| value = s2mpb02_led_get_en_value(led_data, 0); |
| if ((id == S2MPB02_FLASH_LED_1) || (id == S2MPB02_TORCH_LED_1)) { |
| reg = S2MPB02_REG_FLED_CTRL1; |
| mask = S2MPB02_FLED_ENABLE_MODE_MASK; |
| } else { |
| reg = S2MPB02_REG_FLED_CTRL2; |
| mask = S2MPB02_FLED2_ENABLE_MODE_MASK; |
| } |
| ret = s2mpb02_set_bits(led_data->i2c, reg, mask, value); |
| if (unlikely(ret)) |
| goto error_set_bits; |
| |
| if ((id == S2MPB02_FLASH_LED_1) || (id == S2MPB02_TORCH_LED_1)) { |
| reg = S2MPB02_REG_FLED_CUR1; |
| } else { |
| reg = S2MPB02_REG_FLED_CUR2; |
| } |
| /* set current */ |
| ret = s2mpb02_set_bits(led_data->i2c, reg, leds_mask[id], |
| data->brightness << leds_shift[id]); |
| if (unlikely(ret)) |
| goto error_set_bits; |
| } else { |
| if ((id == S2MPB02_FLASH_LED_1) || (id == S2MPB02_TORCH_LED_1)) { |
| reg = S2MPB02_REG_FLED_CUR1; |
| } else { |
| reg = S2MPB02_REG_FLED_CUR2; |
| } |
| /* set current */ |
| ret = s2mpb02_set_bits(led_data->i2c, reg, leds_mask[id], |
| data->brightness << leds_shift[id]); |
| if (unlikely(ret)) |
| goto error_set_bits; |
| |
| /* Turn on LED by I2C */ |
| value = s2mpb02_led_get_en_value(led_data, 1); |
| if ((id == S2MPB02_FLASH_LED_1) || (id == S2MPB02_TORCH_LED_1)) { |
| reg = S2MPB02_REG_FLED_CTRL1; |
| mask = S2MPB02_FLED_ENABLE_MODE_MASK; |
| } else { |
| reg = S2MPB02_REG_FLED_CTRL2; |
| mask = S2MPB02_FLED2_ENABLE_MODE_MASK; |
| } |
| ret = s2mpb02_set_bits(led_data->i2c, reg, mask, value); |
| if (unlikely(ret)) |
| goto error_set_bits; |
| } |
| } |
| return; |
| |
| error_set_bits: |
| pr_err("%s: can't set led level %d\n", __func__, ret); |
| |
| return; |
| } |
| |
| static void s2mpb02_led_work(struct work_struct *work) |
| { |
| struct s2mpb02_led_data *led_data |
| = container_of(work, struct s2mpb02_led_data, work); |
| |
| pr_debug("[LED] %s\n", __func__); |
| |
| mutex_lock(&led_data->lock); |
| led_set(led_data, S2MPB02_LED_TURN_WAY_I2C); |
| mutex_unlock(&led_data->lock); |
| } |
| |
| static int s2mpb02_led_setup(struct s2mpb02_led_data *led_data) |
| { |
| int ret = 0; |
| struct s2mpb02_led *data = led_data->data; |
| int id, value; |
| |
| if (data == NULL) { |
| pr_err("%s : data is null\n",__func__); |
| return -1; |
| } |
| |
| id = data->id; |
| |
| /* set Low Voltage operating mode disable */ |
| ret |= s2mpb02_update_reg(led_data->i2c, S2MPB02_REG_FLED_CTRL1, |
| S2MPB02_FLED_CTRL1_LV_DISABLE, S2MPB02_FLED_CTRL1_LV_EN_MASK); |
| |
| /* set current & timeout */ |
| ret |= s2mpb02_update_reg(led_data->i2c, S2MPB02_REG_FLED_CUR1, |
| data->brightness << leds_shift[id], leds_mask[id]); |
| ret |= s2mpb02_update_reg(led_data->i2c, S2MPB02_REG_FLED_TIME1, |
| data->timeout << leds_shift[id], leds_mask[id]); |
| |
| value = s2mpb02_led_get_en_value(led_data, 0); |
| ret |= s2mpb02_update_reg(led_data->i2c, |
| S2MPB02_REG_FLED_CTRL1, value, S2MPB02_FLED_ENABLE_MODE_MASK); |
| |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| /* set current & timeout */ |
| ret |= s2mpb02_update_reg(led_data->i2c, S2MPB02_REG_FLED_CUR2, |
| data->brightness << leds_shift[id], leds_mask[id]); |
| ret |= s2mpb02_update_reg(led_data->i2c, S2MPB02_REG_FLED_TIME2, |
| 0x00 , leds_mask[id]); |
| |
| value = s2mpb02_led_get_en_value(led_data, 0); |
| ret = s2mpb02_update_reg(led_data->i2c, |
| S2MPB02_REG_FLED_CTRL2, value, S2MPB02_FLED2_ENABLE_MODE_MASK); |
| #endif |
| |
| ret |= s2mpb02_update_reg(led_data->i2c, |
| S2MPB02_REG_FLED_CTRL2, 0x04, S2MPB02_TORCH_MASK); |
| |
| #ifdef CONFIG_LEDS_IRIS_IRLED_SUPPORT |
| /* Remote-mode off, Power-LED Mode on, GPIO Polarity */ |
| ret |= s2mpb02_write_reg(led_data->i2c, S2MPB02_REG_FLED_CTRL2, 0x38); |
| |
| /* set current - 1050mA */ |
| ret |= s2mpb02_write_reg(led_data->i2c, S2MPB02_REG_FLED_CUR2, 0xAF); |
| |
| /* set 0x18, 0x19, 0x1A, 0x1B */ |
| ret |= s2mpb02_write_reg(led_data->i2c, S2MPB02_REG_FLED_IRON1, 0x19); |
| ret |= s2mpb02_write_reg(led_data->i2c, S2MPB02_REG_FLED_IRON2, 0x0B); |
| ret |= s2mpb02_write_reg(led_data->i2c, S2MPB02_REG_FLED_IRD1, 0x00); |
| ret |= s2mpb02_write_reg(led_data->i2c, S2MPB02_REG_FLED_IRD2, 0x2C); |
| #endif |
| |
| return ret; |
| } |
| |
| void s2mpb02_led_get_status(struct s2mpb02_led_data *led_data) |
| { |
| int ret = 0; |
| u8 value[11] = {0, }; |
| |
| ret = s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_INT1, &value[0]); /*INT1*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CTRL1, &value[1]); /*FLED_CTRL1*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CTRL2, &value[2]); /*FLED_CTRL2*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CUR1, &value[3]); /*FLED_CUR1*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_TIME1, &value[4]); /*FLED_TIME1*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CUR2, &value[5]); /*FLED_CUR2*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_TIME2, &value[6]); /*FLED_TIME2*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRON1, &value[7]); /*FLED_IRON1*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRON2, &value[8]); /*FLED_IRON2*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRD1, &value[9]); /*FLED_IRD1*/ |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRD2, &value[10]); /*FLED_IRD2*/ |
| if (unlikely(ret < 0)) { |
| pr_info("%s : i2c fail\n", __func__); |
| } |
| |
| pr_info("%s: INT1[0x%02x] FLED CTRL1[0x%02x] CTRL2[0x%02x] CUR1[0x%02x] TIME1[0x%02x]\n", |
| __func__, value[0], value[1], value[2], value[3], value[4]); |
| pr_info("%s: CUR2[0x%02x] TIME2[0x%02x] IRON1[0x%02x] IRON2[0x%02x] IRD1[0x%02x] IRD2[0x%02x]\n", |
| __func__, value[5], value[6], value[7], value[8], value[9], value[10]); |
| } |
| |
| /*++ Only use in HealthHW R&D Group to check the ALS sensor performance ++*/ |
| int s2mpb02_led_en(int mode, int onoff, enum s2mpb02_led_turn_way turn_way) |
| { |
| |
| int ret = 0; |
| |
| if (global_led_datas[S2MPB02_TORCH_LED_1] == NULL) { |
| pr_err("<%s> global_led_datas[S2MPB02_TORCH_LED_1] is NULL\n", __func__); |
| return -1; |
| } |
| |
| mutex_lock(&global_led_datas[mode]->lock); |
| |
| if (onoff > 0) {/* enable */ |
| pr_info("<%s> enable %d, %d\n", __func__, onoff, mode); |
| if (mode == S2MPB02_TORCH_LED_1) { |
| if (onoff >= S2MPB02_TORCH_OUT_I_MAX) |
| onoff = S2MPB02_TORCH_OUT_I_MAX-1; |
| } else if (mode == S2MPB02_FLASH_LED_1) { |
| if (onoff >= S2MPB02_FLASH_OUT_I_MAX) |
| onoff = S2MPB02_FLASH_OUT_I_MAX-1; |
| } else { |
| pr_err("<%s> mode %d is invalid\n", __func__, mode); |
| ret = -1; |
| goto p_unlock; |
| } |
| global_led_datas[mode]->data->brightness = onoff; |
| } else {/* disable */ |
| pr_info("<%s> disable %d, %d\n", __func__, onoff, mode); |
| global_led_datas[mode]->data->brightness = LED_OFF; |
| } |
| |
| led_set(global_led_datas[mode], turn_way); |
| |
| p_unlock: |
| mutex_unlock(&global_led_datas[mode]->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(s2mpb02_led_en); |
| /*-- Request from the HealthHW R&D Group to check the ALS sensor performance --*/ |
| |
| void s2mpb02_led_dump_register(u8 s_reg, u8 e_reg) |
| { |
| int ret = 0; |
| u8 value = 0; |
| u8 i = 0; |
| |
| struct s2mpb02_led_data *led_data = global_led_datas[S2MPB02_TORCH_LED_1]; |
| |
| for (i = s_reg; i <= e_reg; i++) { |
| ret |= s2mpb02_read_reg(led_data->i2c, i, &value); /*Fled_ctrl2*/ |
| if (unlikely(ret < 0)) |
| pr_info("%s : error to read register\n", __func__); |
| else |
| pr_info("%s : reg. 0x%2X = 0x%2X\n", __func__, i, value); |
| } |
| } |
| EXPORT_SYMBOL(s2mpb02_led_dump_register); |
| |
| int s2mpb02_set_torch_current(bool torch_mode, bool change_current, int intensity) |
| { |
| struct s2mpb02_led_data *led_data = global_led_datas[S2MPB02_TORCH_LED_1]; |
| struct s2mpb02_led *data = led_data->data; |
| int ret = 0; |
| u8 cur_brightness; |
| |
| if (change_current) { |
| cur_brightness = (intensity / 20); |
| } else { |
| cur_brightness = torch_mode ? brightness_torch : original_brightness[data->id]; |
| } |
| |
| pr_info("%s: torch_mode[%d] intensity[%d] cur_brightness[%d]\n", |
| __func__, torch_mode, intensity, cur_brightness); |
| mutex_lock(&led_data->lock); |
| |
| data->brightness = cur_brightness; |
| |
| /* set current */ |
| ret = s2mpb02_set_bits(led_data->i2c, S2MPB02_REG_FLED_CUR1, |
| leds_mask[data->id], data->brightness << leds_shift[data->id]); |
| if (unlikely(ret)) { |
| pr_err("%s: failed to set FLED_CUR1, %d\n", __func__, ret); |
| } |
| |
| mutex_unlock(&led_data->lock); |
| return ret; |
| } |
| |
| int s2mpb02_set_flash_current(int intensity) |
| { |
| struct s2mpb02_led_data *led_data = global_led_datas[S2MPB02_FLASH_LED_1]; |
| struct s2mpb02_led *data = led_data->data; |
| int ret = 0; |
| u8 cur_brightness = (intensity > 150) ? ((intensity - 50) / 100) : 1; |
| |
| pr_info("%s: flash intensity %d\n", __func__, intensity); |
| |
| if (cur_brightness < S2MPB02_FLASH_OUT_I_150MA) |
| cur_brightness = S2MPB02_FLASH_OUT_I_150MA; |
| else if (cur_brightness >= S2MPB02_FLASH_OUT_I_MAX) |
| cur_brightness = S2MPB02_FLASH_OUT_I_1550MA; |
| mutex_lock(&led_data->lock); |
| |
| /* set current */ |
| s2mpb02_set_bits(led_data->i2c, S2MPB02_REG_FLED_CUR1, |
| leds_mask[data->id], cur_brightness << leds_shift[data->id]); |
| led_data->brightness = cur_brightness; |
| if (unlikely(ret)) { |
| pr_err("%s: failed to set FLED_CUR1, %d\n", __func__, ret); |
| } |
| |
| mutex_unlock(&led_data->lock); |
| return ret; |
| } |
| |
| ssize_t s2mpb02_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| int value = 0; |
| int ret = 0; |
| |
| if ((buf == NULL) || kstrtouint(buf, 10, &value)) { |
| return -1; |
| } |
| |
| if (global_led_datas[S2MPB02_TORCH_LED_1] == NULL) { |
| pr_err("<%s> global_led_datas[S2MPB02_TORCH_LED_1] is NULL\n", __func__); |
| return -1; |
| } |
| |
| pr_info("[LED]%s , value:%d\n", __func__, value); |
| mutex_lock(&global_led_datas[S2MPB02_TORCH_LED_1]->lock); |
| |
| if (value == 0) { |
| /* Turn off Torch */ |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness = LED_OFF; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_1], S2MPB02_LED_TURN_WAY_GPIO); |
| } else if (value == 1) { |
| /* Turn on Torch */ |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness = S2MPB02_TORCH_OUT_I_60MA; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_1], S2MPB02_LED_TURN_WAY_GPIO); |
| } else if (value == 100) { |
| /* Factory mode Turn on Torch */ |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness = S2MPB02_TORCH_OUT_I_240MA; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_1], S2MPB02_LED_TURN_WAY_GPIO); |
| } else if (value == 200) { |
| /* Factory mode Turn on Flash */ |
| /* set reserved reg. 0x63 for continuous flash on */ |
| flash_config_factory = true; |
| ret = s2mpb02_write_reg(global_led_datas[S2MPB02_FLASH_LED_1]->i2c, 0x63, 0x5F); |
| if (ret < 0) |
| pr_info("[LED]%s , failed set flash register setting\n", __func__); |
| |
| global_led_datas[S2MPB02_FLASH_LED_1]->data->brightness = S2MPB02_FLASH_OUT_I_350MA; |
| led_set(global_led_datas[S2MPB02_FLASH_LED_1], S2MPB02_LED_TURN_WAY_GPIO); |
| } else if (value >= 1001 && value <= 1010) { |
| /* Torch mode, step 1~5 value : 1001, 1002, 1004, 1006, 1009 */ |
| int brightness_value = value - 1001; |
| int torch_intensity = -1; |
| |
| if (global_led_datas[S2MPB02_TORCH_LED_1]->data->torch_table[brightness_value] != 0) { |
| torch_intensity = global_led_datas[S2MPB02_TORCH_LED_1]->data->torch_table[brightness_value]; |
| } |
| if (torch_intensity < 0) { |
| pr_info("[LED]%s , Invalid torch_intensity(%d), reset as default: %d\n", __func__, torch_intensity, |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness); |
| torch_intensity = global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness; |
| } |
| /* Turn on Torch Step 40mA ~ 240mA */ |
| pr_info("[LED]%s , %d->%d(%dmA)\n", __func__, brightness_value, torch_intensity, (torch_intensity)*20); |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness = torch_intensity; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_1], S2MPB02_LED_TURN_WAY_GPIO); |
| } else if (value >= 2000 && value <= 2015) { |
| int torch_intensity = value - 2000; |
| |
| /* Turn on Torch 20mA ~ 300mA of each step 20mA*/ |
| pr_info("[LED]%s , torch brightness set (%dmA)\n", __func__, (torch_intensity)*20); |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness = torch_intensity; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_1], S2MPB02_LED_TURN_WAY_GPIO); |
| } else { |
| pr_info("[LED]%s , Invalid value:%d\n", __func__, value); |
| } |
| |
| if (value <= 0) { |
| s2mpb02_set_bits(global_led_datas[S2MPB02_TORCH_LED_1]->i2c, S2MPB02_REG_FLED_CUR1, |
| leds_mask[global_led_datas[S2MPB02_TORCH_LED_1]->data->id], |
| original_brightness[S2MPB02_TORCH_LED_1] << leds_shift[global_led_datas[S2MPB02_TORCH_LED_1]->data->id]); |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness = original_brightness[S2MPB02_TORCH_LED_1]; |
| |
| if (flash_config_factory) { |
| s2mpb02_write_reg(global_led_datas[S2MPB02_FLASH_LED_1]->i2c, 0x63, 0x7F); |
| s2mpb02_set_bits(global_led_datas[S2MPB02_FLASH_LED_1]->i2c, S2MPB02_REG_FLED_CUR1, |
| leds_mask[global_led_datas[S2MPB02_FLASH_LED_1]->data->id], |
| original_brightness[S2MPB02_FLASH_LED_1] << leds_shift[global_led_datas[S2MPB02_FLASH_LED_1]->data->id]); |
| global_led_datas[S2MPB02_FLASH_LED_1]->data->brightness = original_brightness[S2MPB02_FLASH_LED_1]; |
| flash_config_factory = false; |
| } |
| } |
| |
| mutex_unlock(&global_led_datas[S2MPB02_TORCH_LED_1]->lock); |
| return count; |
| } |
| |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| ssize_t s2mpb02_store_2nd(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| int value = 0; |
| int ret = 0; |
| |
| if ((buf == NULL) || kstrtouint(buf, 10, &value)) { |
| return -1; |
| } |
| |
| if (global_led_datas[S2MPB02_TORCH_LED_2] == NULL) { |
| pr_err("<%s> global_led_datas[S2MPB02_TORCH_LED_2] is NULL\n", __func__); |
| return -1; |
| } |
| |
| pr_info("[LED]%s , value:%d\n", __func__, value); |
| mutex_lock(&global_led_datas[S2MPB02_TORCH_LED_2]->lock); |
| |
| if (value == 0) { |
| if (!flash_config_factory) { |
| global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness = LED_OFF; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_2], S2MPB02_LED_TURN_WAY_I2C); |
| } else { |
| global_led_datas[S2MPB02_FLASH_LED_1]->data->brightness = LED_OFF; |
| led_set(global_led_datas[S2MPB02_FLASH_LED_1], S2MPB02_LED_TURN_WAY_I2C); |
| } |
| } else if (value == 1) { |
| /* Turn on Torch */ |
| global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness = S2MPB02_TORCH_OUT_I_60MA; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_2], S2MPB02_LED_TURN_WAY_I2C); |
| } else if (value == 100) { |
| /* Factory mode Turn on Torch */ |
| global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness = S2MPB02_TORCH_OUT_I_240MA; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_2], S2MPB02_LED_TURN_WAY_I2C); |
| } else if (value == 200) { |
| /* Factory mode Turn on Flash */ |
| /* set reserved reg. 0x63 for continuous flash on */ |
| flash_config_factory = true; |
| ret = s2mpb02_write_reg(global_led_datas[S2MPB02_FLASH_LED_1]->i2c, 0x63, 0x5F); |
| if (ret < 0) |
| pr_info("[LED]%s , failed set flash register setting\n", __func__); |
| |
| global_led_datas[S2MPB02_FLASH_LED_1]->data->brightness = S2MPB02_FLASH_OUT_I_350MA; |
| led_set(global_led_datas[S2MPB02_FLASH_LED_1], S2MPB02_LED_TURN_WAY_I2C); |
| } else if (value >= 1001 && value <= 1010) { |
| /* Torch mode, step 1~5 value : 1001, 1002, 1004, 1006, 1009 */ |
| int brightness_value = value - 1001; |
| int torch_intensity = -1; |
| |
| if (global_led_datas[S2MPB02_TORCH_LED_2]->data->torch_table[brightness_value] != 0) { |
| torch_intensity = global_led_datas[S2MPB02_TORCH_LED_2]->data->torch_table[brightness_value]; |
| } |
| if (torch_intensity < 0) { |
| pr_info("[LED]%s , Invalid torch_intensity(%d), reset as default: %d\n", __func__, torch_intensity, |
| global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness); |
| torch_intensity = global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness; |
| } |
| /* Turn on Torch Step 40mA ~ 240mA */ |
| pr_info("[LED]%s , %d->%d(%dmA)\n", __func__, brightness_value, torch_intensity, (torch_intensity)*20); |
| global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness = torch_intensity; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_2], S2MPB02_LED_TURN_WAY_I2C); |
| } else if (value >= 2000 && value <= 2015) { |
| int torch_intensity = value - 2000; |
| |
| /* Turn on Torch 20mA ~ 300mA of each step 20mA*/ |
| pr_info("[LED]%s , torch brightness set (%dmA)\n", __func__, (torch_intensity)*20); |
| global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness = torch_intensity; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_2], S2MPB02_LED_TURN_WAY_I2C); |
| } else { |
| pr_info("[LED]%s , Invalid value:%d\n", __func__, value); |
| } |
| |
| if (value <= 0) { |
| s2mpb02_set_bits(global_led_datas[S2MPB02_TORCH_LED_2]->i2c, S2MPB02_REG_FLED_CUR1, |
| leds_mask[global_led_datas[S2MPB02_TORCH_LED_2]->data->id], |
| original_brightness[S2MPB02_TORCH_LED_2] << leds_shift[global_led_datas[S2MPB02_TORCH_LED_2]->data->id]); |
| global_led_datas[S2MPB02_TORCH_LED_2]->data->brightness = original_brightness[S2MPB02_TORCH_LED_2]; |
| |
| if (flash_config_factory) { |
| s2mpb02_write_reg(global_led_datas[S2MPB02_FLASH_LED_1]->i2c, 0x63, 0x7F); |
| s2mpb02_set_bits(global_led_datas[S2MPB02_FLASH_LED_1]->i2c, S2MPB02_REG_FLED_CUR2, |
| leds_mask[global_led_datas[S2MPB02_FLASH_LED_1]->data->id], |
| original_brightness[S2MPB02_FLASH_LED_1] << leds_shift[global_led_datas[S2MPB02_FLASH_LED_1]->data->id]); |
| global_led_datas[S2MPB02_FLASH_LED_1]->data->brightness = original_brightness[S2MPB02_FLASH_LED_1]; |
| flash_config_factory = false; |
| } |
| } |
| |
| mutex_unlock(&global_led_datas[S2MPB02_TORCH_LED_2]->lock); |
| return count; |
| } |
| #endif |
| |
| ssize_t s2mpb02_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| if (global_led_datas[S2MPB02_TORCH_LED_1] == NULL) { |
| pr_err("<%s> global_led_datas[S2MPB02_TORCH_LED_1] is NULL\n", __func__); |
| return -1; |
| } |
| |
| pr_info("[LED] %s , MAX STEP TORCH_LED:%d\n", __func__, S2MPB02_TORCH_OUT_I_MAX - 1); |
| return sprintf(buf, "%d\n", S2MPB02_TORCH_OUT_I_MAX - 1); |
| } |
| |
| #ifdef CONFIG_LEDS_IRIS_IRLED_CERTIFICATE_SUPPORT |
| ssize_t s2mpb02_irled_torch_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| int value = 0; |
| u8 ledvalue = 0; |
| int ret = 0; |
| |
| if ((buf == NULL) || kstrtouint(buf, 10, &value)) { |
| return -1; |
| } |
| |
| if(global_led_datas[0] == NULL) { |
| pr_err("<%s> global_led_datas[S2MPB02_TORCH_LED_1] is NULL\n", __func__); |
| return -1; |
| } |
| |
| pr_info("%s , value:%d\n", __func__, value); |
| if (value == 1) { |
| pr_info("%s IRLED TORCH ON\n", __func__); |
| /* FLED_TIME2.IR_MAX_TIMER_EN Disable */ |
| ret |= s2mpb02_update_reg(global_led_datas[0]->i2c, |
| S2MPB02_REG_FLED_TIME2, |
| S2MPB02_FLED_TIME2_IRMAX_TIMER_DISABLE, |
| S2MPB02_FLED_TIME2_IRMAX_TIMER_EN_MASK); |
| |
| /* Remote-mode off, TORCH MODE */ |
| ret |= s2mpb02_update_reg(global_led_datas[0]->i2c, |
| S2MPB02_REG_FLED_CTRL2, |
| S2MPB02_FLED_CTRL2_TORCH_ON, |
| S2MPB02_FLED_CTRL2_TORCH_MASK); |
| ret |= s2mpb02_update_reg(global_led_datas[0]->i2c, |
| S2MPB02_REG_FLED_CUR2, 0x0E, S2MPB02_FLED_CUR2_TORCH_CUR2_MASK); |
| } else if (value == 0) { |
| pr_info("%s IRLED TORCH OFF\n", __func__); |
| /* Remote-mode off, Power-LED Mode on, GPIO Polarity */ |
| ret |= s2mpb02_update_reg(global_led_datas[0]->i2c, |
| S2MPB02_REG_FLED_CTRL2, |
| S2MPB02_FLED_CTRL2_FLASH_ON, |
| S2MPB02_FLED_CTRL2_TORCH_MASK); |
| } else { |
| pr_err("%s value(%d) is invalid!!\n", __func__, value); |
| return -1; |
| } |
| ret |= s2mpb02_read_reg(global_led_datas[0]->i2c, S2MPB02_REG_FLED_CTRL2, &ledvalue); |
| pr_info("[LED]%s , ledvalue:%x\n", __func__, ledvalue); |
| |
| return count; |
| } |
| |
| ssize_t s2mpb02_irled_torch_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct s2mpb02_led_data *led_data; |
| int ret = 0; |
| u8 value[10] = {0, }; |
| |
| if(global_led_datas[0] == NULL) { |
| pr_err("<%s> global_led_datas[S2MPB02_TORCH_LED_1] is NULL\n", __func__); |
| return -1; |
| } |
| led_data = global_led_datas[0]; |
| |
| ret = s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CTRL1, &value[0]); //Fled_ctrl1 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CTRL2, &value[1]); //Fled_ctrl2 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CUR1, &value[2]); //Fled_cur1 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_TIME1, &value[3]); //Fled_time1 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_CUR2, &value[4]); //Fled_cur2 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_TIME2, &value[5]); //Fled_time2 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRON1, &value[6]); //Fled_iron1 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRON2, &value[7]); //Fled_iron2 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRD1, &value[8]); //Fled_ird1 |
| ret |= s2mpb02_read_reg(led_data->i2c, S2MPB02_REG_FLED_IRD2, &value[9]); //Fled_ird2 |
| if (unlikely(ret < 0)) { |
| printk("%s : error to get dt node\n", __func__); |
| } |
| |
| pr_info("%s : Fled_ctrl1 = 0x%12x, Fled_ctrl2 = 0x%13x, Fled_cur1 = 0x%14x, " |
| "Fled_time1 = 0x%15x, Fled_cur2 = 0x%16x, Fled_time2 = 0x%17x, " |
| "Fled_iron1 = 0x%x, Fled_iron2 = 0x%x, Fled_ird1 = 0x%x, Fled_ird2 = 0x%x\n", |
| __func__, value[0], value[1], value[2], value[3], value[4], value[5], |
| value[6], value[7], value[8], value[9]); |
| |
| return sprintf(buf, "0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x,0x%x\n", |
| value[0], value[1], value[2], value[3], value[4], value[5], |
| value[6], value[7], value[8], value[9]); |
| } |
| |
| static DEVICE_ATTR(irled_torch, S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH, |
| s2mpb02_irled_torch_show, s2mpb02_irled_torch_store); |
| #endif |
| |
| static DEVICE_ATTR(rear_flash, S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH, |
| s2mpb02_show, s2mpb02_store); |
| |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| static DEVICE_ATTR(rear_flash2, S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH, |
| s2mpb02_show, s2mpb02_store_2nd); |
| #endif |
| |
| #ifdef CONFIG_LEDS_IRIS_IRLED_SUPPORT |
| int s2mpb02_ir_led_current(uint32_t current_value) |
| { |
| int ret = 0; |
| unsigned int value = current_value - 1; |
| unsigned char data = 0; |
| |
| pr_info("[%s] led current value : %u \n", __func__, value); |
| |
| data = ((value & 0x0F) << 4) | 0x0F; |
| |
| ret = s2mpb02_write_reg(global_led_datas[0]->i2c, S2MPB02_REG_FLED_CUR2, data); |
| if (ret < 0) |
| pr_err("[%s] i2c write error", __func__); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s2mpb02_ir_led_current); |
| |
| int s2mpb02_ir_led_pulse_width(uint32_t width) |
| { |
| unsigned int value = width; |
| unsigned char iron1 = 0; |
| unsigned char iron2 = 0; |
| int ret = 0; |
| |
| pr_info("[%s] led pulse_width value : %u\n", __func__, value); |
| |
| iron1 = (value >> 2) & 0xFF; |
| iron2 = (value & 0x03) << 6; |
| |
| pr_info("[%s] IRON1(0x%02x), IRON2(0x%02x)\n", __func__, iron1, iron2); |
| |
| /* set 0x18, 0x19 */ |
| ret |= s2mpb02_write_reg(global_led_datas[0]->i2c, S2MPB02_REG_FLED_IRON1, iron1); |
| ret |= s2mpb02_set_bits(global_led_datas[0]->i2c, S2MPB02_REG_FLED_IRON2, |
| S2MPB02_FLED2_IRON2_MASK, iron2); |
| if (ret < 0) |
| pr_err("[%s] i2c write error", __func__); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s2mpb02_ir_led_pulse_width); |
| |
| int s2mpb02_ir_led_pulse_delay(uint32_t delay) |
| { |
| unsigned int value = delay; |
| unsigned char ird1 = 0; |
| unsigned char ird2 = 0; |
| int ret = 0; |
| |
| pr_info("[%s] led pulse_delay value : %u\n", __func__, value); |
| |
| ird1 = (value >> 2) & 0xFF; |
| ird2 = ((value & 0x03) << 6) | 0x2C; /* value 0x2C means RSVD[5:0] Reserved */ |
| |
| pr_info("[%s] IRD1(0x%02x), IRD2(0x%02x)\n", __func__, ird1, ird2); |
| |
| /* set 0x1A, 0x1B */ |
| ret |= s2mpb02_write_reg(global_led_datas[0]->i2c, S2MPB02_REG_FLED_IRD1, ird1); |
| ret |= s2mpb02_write_reg(global_led_datas[0]->i2c, S2MPB02_REG_FLED_IRD2, ird2); |
| if (ret < 0) |
| pr_err("[%s] i2c write error", __func__); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s2mpb02_ir_led_pulse_delay); |
| |
| int s2mpb02_ir_led_max_time(uint32_t max_time) |
| { |
| int ret = 0; |
| |
| pr_info("[%s] led max_time value : %u\n", __func__, max_time); |
| |
| /* set IRLED max timer interrupt clear and enabled */ |
| ret |= s2mpb02_set_bits(global_led_datas[0]->i2c, S2MPB02_REG_FLED_CTRL2, |
| S2MPB02_FLED2_MAX_TIME_CLEAR_MASK, 0x00); |
| ret |= s2mpb02_set_bits(global_led_datas[0]->i2c, S2MPB02_REG_FLED_TIME2, |
| S2MPB02_FLED2_MAX_TIME_EN_MASK, 0x00); |
| if (max_time > 0) { |
| ret |= s2mpb02_set_bits(global_led_datas[0]->i2c, S2MPB02_REG_FLED_TIME2, |
| S2MPB02_FLED2_MAX_TIME_EN_MASK, 0x01); |
| |
| ret |= s2mpb02_set_bits(global_led_datas[0]->i2c, S2MPB02_REG_FLED_IRON2, |
| S2MPB02_FLED2_MAX_TIME_MASK, (u8) max_time - 1); |
| } |
| |
| s2mpb02_led_get_status(global_led_datas[0]); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s2mpb02_ir_led_max_time); |
| #endif |
| |
| #if defined(CONFIG_OF) |
| static int of_s2mpb02_torch_dt(struct s2mpb02_dev *iodev, |
| struct s2mpb02_led_platform_data *pdata) |
| { |
| struct device_node *led_np, *np, *c_np; |
| int ret; |
| u32 temp; |
| u32 irda_off = 0; |
| const char *temp_str; |
| int index; |
| u32 torch_table_enable = 0; |
| |
| led_np = iodev->dev->of_node; |
| if (!led_np) { |
| pr_info("<%s> could not find led sub-node\n", __func__); |
| return -ENODEV; |
| } |
| |
| np = of_find_node_by_name(led_np, "torch"); |
| if (!np) { |
| pr_info("<%s> could not find led sub-node\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| torch1_gpio = of_get_named_gpio(np, "torch1-gpio", 0); |
| if (!gpio_is_valid(torch1_gpio)) { |
| pr_info("%s failed to get a torch1_gpio\n", __func__); |
| } else { |
| gpio_request(torch1_gpio, NULL); |
| gpio_direction_output(torch1_gpio, 0); |
| gpio_free(torch1_gpio); |
| } |
| |
| flash1_gpio = of_get_named_gpio(np, "flash1-gpio", 0); |
| if (!gpio_is_valid(flash1_gpio)) { |
| pr_info("%s failed to get a flash1_gpio\n", __func__); |
| } else { |
| gpio_request(flash1_gpio, NULL); |
| gpio_direction_output(flash1_gpio, 0); |
| gpio_free(flash1_gpio); |
| } |
| |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| torch2_gpio = of_get_named_gpio(np, "torch2-gpio", 0); |
| if (!gpio_is_valid(torch2_gpio)) { |
| pr_info("%s failed to get a torch2_gpio\n", __func__); |
| } else { |
| gpio_request(torch2_gpio, NULL); |
| gpio_direction_output(torch2_gpio, 0); |
| gpio_free(torch2_gpio); |
| } |
| |
| flash2_gpio = of_get_named_gpio(np, "flash2-gpio", 0); |
| if (!gpio_is_valid(flash2_gpio)) { |
| pr_info("%s failed to get a flash2_gpio\n", __func__); |
| } else { |
| gpio_request(flash2_gpio, NULL); |
| gpio_direction_output(flash2_gpio, 0); |
| gpio_free(flash2_gpio); |
| } |
| #endif |
| |
| ret = of_property_read_u32(np, "brightness_torch", &temp); |
| if (ret) { |
| brightness_torch = S2MPB02_TORCH_OUT_I_220MA; |
| pr_info("%s failed to get a torch_current. default 220mA\n", __func__); |
| } else |
| brightness_torch = (enum s2mpb02_torch_current)temp; |
| |
| pdata->num_leds = of_get_child_count(np); |
| |
| for_each_child_of_node(np, c_np) { |
| ret = of_property_read_u32(c_np, "id", &temp); |
| if (ret) { |
| pr_info("%s failed to get a id\n", __func__); |
| } |
| index = temp; |
| pdata->leds[index].id = temp; |
| |
| ret = of_property_read_string(c_np, "ledname", &temp_str); |
| if (ret) { |
| pr_info("%s failed to get a ledname\n", __func__); |
| } |
| pdata->leds[index].name = temp_str; |
| ret = of_property_read_u32(c_np, "brightness", &temp); |
| if (ret) { |
| pr_info("%s failed to get a brightness\n", __func__); |
| } |
| if (temp > S2MPB02_FLASH_TORCH_CURRENT_MAX) { |
| pr_info("%s out of range : brightness\n", __func__); |
| } |
| pdata->leds[index].brightness = temp; |
| original_brightness[index] = temp; |
| |
| ret = of_property_read_u32(c_np, "timeout", &temp); |
| if (ret) { |
| pr_info("%s failed to get a timeout\n", __func__); |
| } |
| if (temp > S2MPB02_TIMEOUT_MAX) { |
| pr_info("%s out of range : timeout\n", __func__); |
| } |
| pdata->leds[index].timeout = temp; |
| |
| if (index == 1) { |
| ret = of_property_read_u32(c_np, "irda_off", &irda_off); |
| if (ret) { |
| pr_info("%s failed to get a irda_off\n", __func__); |
| } |
| pdata->leds[index].irda_off = irda_off; |
| } |
| |
| ret = of_property_read_u32(c_np, "torch_table_enable", &torch_table_enable); |
| if (ret) { |
| pr_info("%s failed to get a torch_table_enable\n", __func__); |
| } |
| |
| if (torch_table_enable == 1) { |
| pdata->leds[index].torch_table_enable = torch_table_enable; |
| ret = of_property_read_u32_array(c_np, "torch_table", pdata->leds[index].torch_table, TORCH_STEP); |
| } else { |
| pdata->leds[index].torch_table_enable = 0; |
| } |
| } |
| of_node_put(led_np); |
| |
| return 0; |
| } |
| #endif /* CONFIG_OF */ |
| |
| static int s2mpb02_led_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| int i; |
| struct s2mpb02_dev *s2mpb02 = dev_get_drvdata(pdev->dev.parent); |
| #ifndef CONFIG_OF |
| struct s2mpb02_platform_data *s2mpb02_pdata |
| = dev_get_platdata(s2mpb02->dev); |
| #endif |
| struct s2mpb02_led_platform_data *pdata; |
| struct s2mpb02_led_data *led_data; |
| struct s2mpb02_led *data; |
| struct s2mpb02_led_data **led_datas; |
| |
| #ifdef CONFIG_OF |
| pdata = kzalloc(sizeof(struct s2mpb02_led_platform_data), GFP_KERNEL); |
| if (!pdata) { |
| pr_err("%s: failed to allocate driver data\n", __func__); |
| return -ENOMEM; |
| } |
| ret = of_s2mpb02_torch_dt(s2mpb02, pdata); |
| if (ret < 0) { |
| pr_err("s2mpb02-torch : %s not found torch dt! ret[%d]\n", |
| __func__, ret); |
| kfree(pdata); |
| return -1; |
| } |
| #else |
| pdata = s2mpb02_pdata->led_data; |
| if (pdata == NULL) { |
| pr_err("[LED] no platform data for this led is found\n"); |
| return -EFAULT; |
| } |
| #endif |
| led_datas = kzalloc(sizeof(struct s2mpb02_led_data *) |
| * S2MPB02_LED_MAX, GFP_KERNEL); |
| if (unlikely(!led_datas)) { |
| pr_err("[LED] memory allocation error %s", __func__); |
| kfree(pdata); |
| return -ENOMEM; |
| } |
| platform_set_drvdata(pdev, led_datas); |
| |
| pr_info("[LED] %s %d leds\n", __func__, pdata->num_leds); |
| |
| for (i = 0; i != pdata->num_leds; ++i) { |
| pr_info("%s led%d setup ...\n", __func__, i); |
| |
| data = kzalloc(sizeof(struct s2mpb02_led), GFP_KERNEL); |
| if (unlikely(!data)) { |
| pr_err("[LED] memory allocation error %s\n", __func__); |
| ret = -ENOMEM; |
| continue; |
| } |
| |
| memcpy(data, &(pdata->leds[i]), sizeof(struct s2mpb02_led)); |
| |
| led_data = kzalloc(sizeof(struct s2mpb02_led_data), |
| GFP_KERNEL); |
| |
| global_led_datas[i] = led_data; |
| led_datas[i] = led_data; |
| if (unlikely(!led_data)) { |
| pr_err("[LED] memory allocation error %s\n", __func__); |
| ret = -ENOMEM; |
| kfree(data); |
| continue; |
| } |
| |
| led_data->s2mpb02 = s2mpb02; |
| led_data->i2c = s2mpb02->i2c; |
| led_data->data = data; |
| led_data->led.name = data->name; |
| led_data->led.brightness_set = s2mpb02_led_set; |
| led_data->led.brightness = LED_OFF; |
| led_data->brightness = data->brightness; |
| led_data->led.flags = 0; |
| led_data->led.max_brightness = S2MPB02_FLASH_TORCH_CURRENT_MAX; |
| |
| mutex_init(&led_data->lock); |
| spin_lock_init(&led_data->value_lock); |
| INIT_WORK(&led_data->work, s2mpb02_led_work); |
| |
| ret = led_classdev_register(&pdev->dev, &led_data->led); |
| if (unlikely(ret)) { |
| pr_err("unable to register LED\n"); |
| cancel_work_sync(&led_data->work); |
| mutex_destroy(&led_data->lock); |
| kfree(data); |
| kfree(led_data); |
| led_datas[i] = NULL; |
| global_led_datas[i] = NULL; |
| ret = -EFAULT; |
| continue; |
| } |
| |
| ret = s2mpb02_led_setup(led_data); |
| /* To prevent faint LED light, enable active discharge */ |
| ret |= s2mpb02_update_reg(led_data->i2c, S2MPB02_REG_FLED_IRD2, |
| 0x02, 0x02); |
| if (unlikely(ret)) { |
| pr_err("unable to register LED\n"); |
| cancel_work_sync(&led_data->work); |
| mutex_destroy(&led_data->lock); |
| led_classdev_unregister(&led_data->led); |
| kfree(data); |
| kfree(led_data); |
| led_datas[i] = NULL; |
| global_led_datas[i] = NULL; |
| ret = -EFAULT; |
| } |
| } |
| |
| #ifdef CONFIG_OF |
| kfree(pdata); |
| #endif |
| |
| camera_flash_dev = device_create(camera_class, NULL, 3, NULL, "flash"); |
| |
| if (IS_ERR(camera_flash_dev)) { |
| pr_err("<%s> Failed to create device(flash)!\n", __func__); |
| } else { |
| if (device_create_file(camera_flash_dev, &dev_attr_rear_flash) < 0) { |
| pr_err("<%s> failed to create device file, %s\n", |
| __func__ ,dev_attr_rear_flash.attr.name); |
| } |
| |
| #ifdef CONFIG_LEDS_IRIS_IRLED_CERTIFICATE_SUPPORT |
| if (device_create_file(camera_flash_dev, |
| &dev_attr_irled_torch) < 0) { |
| pr_err("<%s> failed to create device file, %s\n", |
| __func__ , dev_attr_irled_torch.attr.name); |
| } |
| #endif |
| |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| if(device_create_file(camera_flash_dev, &dev_attr_rear_flash2) < 0) { |
| pr_err("<%s> failed to create device file, %s\n", |
| __func__ ,dev_attr_rear_flash2.attr.name); |
| } |
| #endif |
| } |
| |
| pr_err("<%s> end\n", __func__); |
| return ret; |
| } |
| |
| static int s2mpb02_led_remove(struct platform_device *pdev) |
| { |
| struct s2mpb02_led_data **led_datas = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i != S2MPB02_LED_MAX; ++i) { |
| if (led_datas[i] == NULL) |
| continue; |
| |
| cancel_work_sync(&led_datas[i]->work); |
| mutex_destroy(&led_datas[i]->lock); |
| led_classdev_unregister(&led_datas[i]->led); |
| kfree(led_datas[i]->data); |
| kfree(led_datas[i]); |
| led_datas[i] = NULL; |
| global_led_datas[i] = NULL; |
| } |
| kfree(led_datas); |
| |
| if (camera_flash_dev) { |
| device_remove_file(camera_flash_dev, &dev_attr_rear_flash); |
| #ifdef CONFIG_LEDS_S2MPB02_MULTI_TORCH_REAR2 |
| device_remove_file(camera_flash_dev, &dev_attr_rear_flash2); |
| #endif |
| #ifdef CONFIG_LEDS_IRIS_IRLED_CERTIFICATE_SUPPORT |
| device_remove_file(camera_flash_dev, &dev_attr_irled_torch); |
| #endif |
| } |
| |
| if (camera_class && camera_flash_dev) { |
| device_destroy(camera_class, camera_flash_dev->devt); |
| } |
| |
| return 0; |
| } |
| |
| static void s2mpb02_led_shutdown(struct device *dev) |
| { |
| global_led_datas[S2MPB02_TORCH_LED_1]->data->brightness = LED_OFF; |
| led_set(global_led_datas[S2MPB02_TORCH_LED_1], S2MPB02_LED_TURN_WAY_I2C); |
| } |
| |
| static struct platform_driver s2mpb02_led_driver = { |
| .probe = s2mpb02_led_probe, |
| .remove = s2mpb02_led_remove, |
| .driver = { |
| .name = "s2mpb02-led", |
| .owner = THIS_MODULE, |
| .shutdown = s2mpb02_led_shutdown, |
| }, |
| }; |
| |
| static int __init s2mpb02_led_init(void) |
| { |
| return platform_driver_register(&s2mpb02_led_driver); |
| } |
| module_init(s2mpb02_led_init); |
| |
| static void __exit s2mpb02_led_exit(void) |
| { |
| platform_driver_unregister(&s2mpb02_led_driver); |
| } |
| module_exit(s2mpb02_led_exit); |
| |
| MODULE_DESCRIPTION("S2MPB02 LED driver"); |
| MODULE_LICENSE("GPL"); |
| |