Blackfin arch: Enable BF54x PIN/GPIO interrupts

Signed-off-bu: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 385c262..e01bfc7 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -71,7 +71,7 @@
 
 config IRQCHIP_DEMUX_GPIO
 	bool
-	depends on (BF53x || BF561)
+	depends on (BF53x || BF561 || BF54x)
 	default y
 
 source "init/Kconfig"
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 3309238..f59dcee 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -396,11 +396,11 @@
 	/* check the size of the l1 area */
 	l1_length = _etext_l1 - _stext_l1;
 	if (l1_length > L1_CODE_LENGTH)
-		panic("L1 memory overflow\n");
+		panic("L1 code memory overflow\n");
 
 	l1_length = _ebss_l1 - _sdata_l1;
 	if (l1_length > L1_DATA_A_LENGTH)
-		panic("L1 memory overflow\n");
+		panic("L1 data memory overflow\n");
 
 #ifdef BF561_FAMILY
 	_bfin_swrst = bfin_read_SICA_SWRST();
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index b28625e..e78b03d 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -277,6 +277,40 @@
 
 endmenu
 
+comment "Pin Interrupt to Port Assignment"
+menu "Assignment"
+
+config PINTx_REASSIGN
+	bool "Reprogram PINT Assignment"
+	default n
+	help
+	  The interrupt assignment registers controls the pin-to-interrupt
+	  assignment in a byte-wide manner. Each option allows you to select
+	  a set of pins (High/Low Byte) of an specific Port being mapped
+	  to one of the four PIN Interrupts IRQ_PINTx.
+
+	  You shouldn't change any of these unless you know exactly what you're doing.
+	  Please consult the Blackfin BF54x Processor Hardware Reference Manual.
+
+config PINT0_ASSIGN
+	hex "PINT0_ASSIGN"
+	depends on PINTx_REASSIGN
+	default 0x00000101
+config PINT1_ASSIGN
+	hex "PINT1_ASSIGN"
+	depends on PINTx_REASSIGN
+	default 0x01010000
+config PINT2_ASSIGN
+	hex "PINT2_ASSIGN"
+	depends on PINTx_REASSIGN
+	default 0x00000101
+config PINT3_ASSIGN
+	hex "PINT3_ASSIGN"
+	depends on PINTx_REASSIGN
+	default 0x02020303
+
+endmenu
+
 endmenu
 
 endif
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 9f962f9..09373c9 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -88,14 +88,13 @@
 	for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
 		int irqn;
 
-		ivg7_13[ivg].istop = ivg7_13[ivg].ifirst =
-		    &ivg_table[irq_pos];
+		ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
 
 		for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
 			int iar_shift = (irqn & 7) * 4;
 			if (ivg ==
 			    (0xf &
-			     bfin_read32((unsigned long *) SIC_IAR0 +
+			     bfin_read32((unsigned long *)SIC_IAR0 +
 					 (irqn >> 3)) >> iar_shift)) {
 				ivg_table[irq_pos].irqno = IVG7 + irqn;
 				ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
@@ -222,7 +221,7 @@
 };
 
 static void bfin_demux_error_irq(unsigned int int_err_irq,
-				  struct irq_desc *intb_desc)
+				 struct irq_desc *intb_desc)
 {
 	int irq = 0;
 
@@ -286,8 +285,8 @@
 			}
 
 			pr_debug("IRQ %d:"
-				" MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
-				irq);
+				 " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
+				 irq);
 		}
 	} else
 		printk(KERN_ERR
@@ -295,11 +294,10 @@
 		       " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
 		       __FUNCTION__, __FILE__, __LINE__);
 
-
 }
 #endif				/* BF537_GENERIC_ERROR_INT_DEMUX */
 
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x)
 
 static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -377,8 +375,7 @@
 	}
 
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
-	            IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
-	{
+		    IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
 		if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
 			ret = gpio_request(gpionr, NULL);
 			if (ret)
@@ -423,7 +420,6 @@
 	return 0;
 }
 
-
 static struct irq_chip bfin_gpio_irqchip = {
 	.ack = bfin_gpio_ack_irq,
 	.mask = bfin_gpio_mask_irq,
@@ -435,7 +431,7 @@
 };
 
 static void bfin_demux_gpio_irq(unsigned int intb_irq,
-				 struct irq_desc *intb_desc)
+				struct irq_desc *intb_desc)
 {
 	u16 i;
 
@@ -443,8 +439,7 @@
 		int irq = IRQ_PF0 + i;
 		int flag_d = get_gpiop_data(i);
 		int mask =
-			flag_d & (gpio_enabled[gpio_bank(i)] &
-			      get_gpiop_maska(i));
+		    flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i));
 
 		while (mask) {
 			if (mask & 1) {
@@ -457,6 +452,255 @@
 	}
 }
 
+#else				/* CONFIG_IRQCHIP_DEMUX_GPIO */
+
+#define NR_PINT_SYS_IRQS	4
+#define NR_PINT_BITS		32
+#define NR_PINTS		160
+#define IRQ_NOT_AVAIL		0xFF
+
+#define PINT_2_BANK(x)		((x) >> 5)
+#define PINT_2_BIT(x)		((x) & 0x1F)
+#define PINT_BIT(x)		(1 << (PINT_2_BIT(x)))
+
+static unsigned char irq2pint_lut[NR_PINTS];
+static unsigned short pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
+
+struct pin_int_t {
+	unsigned int mask_set;
+	unsigned int mask_clear;
+	unsigned int request;
+	unsigned int assign;
+	unsigned int edge_set;
+	unsigned int edge_clear;
+	unsigned int invert_set;
+	unsigned int invert_clear;
+	unsigned int pinstate;
+	unsigned int latch;
+};
+
+static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
+	(struct pin_int_t *)PINT0_MASK_SET,
+	(struct pin_int_t *)PINT1_MASK_SET,
+	(struct pin_int_t *)PINT2_MASK_SET,
+	(struct pin_int_t *)PINT3_MASK_SET,
+};
+
+unsigned short get_irq_base(u8 bank, u8 bmap)
+{
+
+	u16 irq_base;
+
+	if (bank < 2) {		/*PA-PB */
+		irq_base = IRQ_PA0 + bmap * 16;
+	} else {		/*PC-PJ */
+		irq_base = IRQ_PC0 + bmap * 16;
+	}
+
+	return irq_base;
+
+}
+
+	/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
+void init_pint_lut(void)
+{
+	u16 bank, bit, irq_base, bit_pos;
+	u32 pint_assign;
+	u8 bmap;
+
+	memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
+
+	for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
+
+		pint_assign = pint[bank]->assign;
+
+		for (bit = 0; bit < NR_PINT_BITS; bit++) {
+
+			bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
+
+			irq_base = get_irq_base(bank, bmap);
+
+			irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
+			bit_pos = bit + bank * NR_PINT_BITS;
+
+			pint2irq_lut[bit_pos] = irq_base;
+			irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
+
+		}
+
+	}
+
+}
+
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+static void bfin_gpio_ack_irq(unsigned int irq)
+{
+	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+	pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val);
+	SSYNC();
+}
+
+static void bfin_gpio_mask_ack_irq(unsigned int irq)
+{
+	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+	pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val);
+	pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
+	SSYNC();
+}
+
+static void bfin_gpio_mask_irq(unsigned int irq)
+{
+	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+	pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
+	SSYNC();
+}
+
+static void bfin_gpio_unmask_irq(unsigned int irq)
+{
+	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+	pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val);
+	pint[PINT_2_BANK(pint_val)]->mask_set = PINT_BIT(pint_val);
+	SSYNC();
+}
+
+static unsigned int bfin_gpio_irq_startup(unsigned int irq)
+{
+	unsigned int ret;
+	u16 gpionr = irq - IRQ_PA0;
+	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+	if (pint_val == IRQ_NOT_AVAIL)
+		return -ENODEV;
+
+	if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+		ret = gpio_request(gpionr, NULL);
+		if (ret)
+			return ret;
+	}
+
+	gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+	bfin_gpio_unmask_irq(irq);
+
+	return ret;
+}
+
+static void bfin_gpio_irq_shutdown(unsigned int irq)
+{
+	bfin_gpio_mask_irq(irq);
+	gpio_free(irq - IRQ_PA0);
+	gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0);
+}
+
+static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+	unsigned int ret;
+	u16 gpionr = irq - IRQ_PA0;
+	u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+	if (pint_val == IRQ_NOT_AVAIL)
+		return -ENODEV;
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* only probe unenabled GPIO interrupt lines */
+		if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+			return 0;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+		    IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+		if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+			ret = gpio_request(gpionr, NULL);
+			if (ret)
+				return ret;
+		}
+
+		gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+	} else {
+		gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+		return 0;
+	}
+
+	gpio_direction_input(gpionr);
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+		pint[PINT_2_BANK(pint_val)]->edge_set = PINT_BIT(pint_val);
+	} else {
+		pint[PINT_2_BANK(pint_val)]->edge_clear = PINT_BIT(pint_val);
+	}
+
+	if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+		pint[PINT_2_BANK(pint_val)]->invert_set = PINT_BIT(pint_val);	/* low or falling edge denoted by one */
+	else
+		pint[PINT_2_BANK(pint_val)]->invert_set = PINT_BIT(pint_val);	/* high or rising edge denoted by zero */
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		pint[PINT_2_BANK(pint_val)]->invert_set = PINT_BIT(pint_val);
+	else
+		pint[PINT_2_BANK(pint_val)]->invert_set = PINT_BIT(pint_val);
+
+	SSYNC();
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		set_irq_handler(irq, handle_edge_irq);
+	else
+		set_irq_handler(irq, handle_level_irq);
+
+	return 0;
+}
+
+static struct irq_chip bfin_gpio_irqchip = {
+	.ack = bfin_gpio_ack_irq,
+	.mask = bfin_gpio_mask_irq,
+	.mask_ack = bfin_gpio_mask_ack_irq,
+	.unmask = bfin_gpio_unmask_irq,
+	.set_type = bfin_gpio_irq_type,
+	.startup = bfin_gpio_irq_startup,
+	.shutdown = bfin_gpio_irq_shutdown
+};
+
+static void bfin_demux_gpio_irq(unsigned int intb_irq,
+				struct irq_desc *intb_desc)
+{
+	u8 bank, pint_val;
+	u32 request, irq;
+
+	switch (intb_irq) {
+	case IRQ_PINT0:
+		bank = 0;
+		break;
+	case IRQ_PINT2:
+		bank = 2;
+		break;
+	case IRQ_PINT3:
+		bank = 3;
+		break;
+	case IRQ_PINT1:
+		bank = 1;
+		break;
+	}
+
+	pint_val = bank * NR_PINT_BITS;
+
+	request = pint[bank]->request;
+
+	while (request) {
+		if (request & 1) {
+			irq = pint2irq_lut[pint_val];
+			struct irq_desc *desc = irq_desc + irq;
+			desc->handle_irq(irq, desc);
+		}
+		pint_val++;
+		request >>= 1;
+	}
+
+}
 #endif				/* CONFIG_IRQCHIP_DEMUX_GPIO */
 
 /*
@@ -502,7 +746,18 @@
 	bfin_write_EVT15(evt_system_call);
 	CSYNC();
 
-	for (irq = 0; irq < SYS_IRQS; irq++) {
+#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
+#ifdef CONFIG_PINTx_REASSIGN
+	pint[0]->assign = CONFIG_PINT0_ASSIGN;
+	pint[1]->assign = CONFIG_PINT1_ASSIGN;
+	pint[2]->assign = CONFIG_PINT2_ASSIGN;
+	pint[3]->assign = CONFIG_PINT3_ASSIGN;
+#endif
+	/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
+	init_pint_lut();
+#endif
+
+	for (irq = 0; irq <= SYS_IRQS; irq++) {
 		if (irq <= IRQ_CORETMR)
 			set_irq_chip(irq, &bfin_core_irqchip);
 		else
@@ -511,20 +766,42 @@
 		if (irq != IRQ_GENERIC_ERROR) {
 #endif
 
+			switch (irq) {
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
-			if ((irq != IRQ_PROG_INTA) /*PORT F & G MASK_A Interrupt*/
-# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
-				&& (irq != IRQ_MAC_RX) /*PORT H MASK_A Interrupt*/
-# endif
-			    ) {
-#endif
-				set_irq_handler(irq, handle_simple_irq);
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
-			} else {
+#ifndef CONFIG_BF54x
+			case IRQ_PROG_INTA:
 				set_irq_chained_handler(irq,
 							bfin_demux_gpio_irq);
-			}
+				break;
+#if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+			case IRQ_MAC_RX:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
 #endif
+#else
+			case IRQ_PINT0:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
+			case IRQ_PINT1:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
+			case IRQ_PINT2:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
+			case IRQ_PINT3:
+				set_irq_chained_handler(irq,
+							bfin_demux_gpio_irq);
+				break;
+#endif				/*CONFIG_BF54x */
+#endif
+			default:
+				set_irq_handler(irq, handle_simple_irq);
+				break;
+			}
 
 #ifdef BF537_GENERIC_ERROR_INT_DEMUX
 		} else {
@@ -540,7 +817,11 @@
 #endif
 
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#ifndef CONFIG_BF54x
 	for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
+#else
+	for (irq = IRQ_PA0; irq < NR_IRQS; irq++) {
+#endif
 		set_irq_chip(irq, &bfin_gpio_irqchip);
 		/* if configured as edge, then will be changed to do_edge_IRQ */
 		set_irq_handler(irq, handle_level_irq);
@@ -553,8 +834,7 @@
 	bfin_write_ILAT(ilat);
 	CSYNC();
 
-	printk(KERN_INFO
-	       "Configuring Blackfin Priority Driven Interrupts\n");
+	printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
 	/* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
 	 * local_irq_enable()
 	 */
@@ -565,14 +845,13 @@
 	/* Enable interrupts IVG7-15 */
 	irq_flags = irq_flags | IMASK_IVG15 |
 	    IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
-	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 |
-	    IMASK_IVGHW;
+	    IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
 
 	return 0;
 }
 
 #ifdef CONFIG_DO_IRQ_L1
-void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text));
 #endif
 
 void do_irq(int vec, struct pt_regs *fp)
@@ -595,7 +874,7 @@
 				atomic_inc(&num_spurious);
 				return;
 			}
-			if (sic_status[(ivg->irqno - IVG7)/32] & ivg->isrflag)
+			if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
 				break;
 		}
 #else
diff --git a/include/asm-blackfin/hardirq.h b/include/asm-blackfin/hardirq.h
index 0cab0d3..b6b19f1 100644
--- a/include/asm-blackfin/hardirq.h
+++ b/include/asm-blackfin/hardirq.h
@@ -28,7 +28,11 @@
  * SOFTIRQ_MASK: 0x00ff0000
  */
 
+#if NR_IRQS > 256
+#define HARDIRQ_BITS	9
+#else
 #define HARDIRQ_BITS	8
+#endif
 
 #ifdef NR_IRQS
 # if (1 << HARDIRQ_BITS) < NR_IRQS
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index 93f5db0..58c87f0 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -1,6 +1,6 @@
 /*
  * file:	include/asm-blackfin/mach-bf548/irq.h
- * based on:	include/asm-blackfin/mach-bf537/irq.h 
+ * based on:	include/asm-blackfin/mach-bf537/irq.h
  * author:	Roy Huang (roy.huang@analog.com)
  *
  * created:
@@ -190,7 +190,7 @@
 #define IRQ_PB12	BFIN_PB_IRQ(12)
 #define IRQ_PB13	BFIN_PB_IRQ(13)
 #define IRQ_PB14	BFIN_PB_IRQ(14)
-#define IRQ_PB15	BFIN_PB_IRQ(15)
+#define IRQ_PB15	BFIN_PB_IRQ(15)		/* N/A */
 
 #define BFIN_PC_IRQ(x)	((x) + IRQ_PB15 + 1)
 #define IRQ_PC0		BFIN_PC_IRQ(0)
@@ -207,8 +207,8 @@
 #define IRQ_PC11	BFIN_PC_IRQ(11)
 #define IRQ_PC12	BFIN_PC_IRQ(12)
 #define IRQ_PC13	BFIN_PC_IRQ(13)
-#define IRQ_PC14	BFIN_PC_IRQ(14)
-#define IRQ_PC15	BFIN_PC_IRQ(15)
+#define IRQ_PC14	BFIN_PC_IRQ(14)		/* N/A */
+#define IRQ_PC15	BFIN_PC_IRQ(15)		/* N/A */
 
 #define BFIN_PD_IRQ(x)	((x) + IRQ_PC15 + 1)
 #define IRQ_PD0		BFIN_PD_IRQ(0)
@@ -246,9 +246,100 @@
 #define IRQ_PE14	BFIN_PE_IRQ(14)
 #define IRQ_PE15	BFIN_PE_IRQ(15)
 
+#define BFIN_PF_IRQ(x)	((x) + IRQ_PE15 + 1)
+#define IRQ_PF0		BFIN_PF_IRQ(0)
+#define IRQ_PF1		BFIN_PF_IRQ(1)
+#define IRQ_PF2		BFIN_PF_IRQ(2)
+#define IRQ_PF3		BFIN_PF_IRQ(3)
+#define IRQ_PF4		BFIN_PF_IRQ(4)
+#define IRQ_PF5		BFIN_PF_IRQ(5)
+#define IRQ_PF6		BFIN_PF_IRQ(6)
+#define IRQ_PF7		BFIN_PF_IRQ(7)
+#define IRQ_PF8		BFIN_PF_IRQ(8)
+#define IRQ_PF9		BFIN_PF_IRQ(9)
+#define IRQ_PF10	BFIN_PF_IRQ(10)
+#define IRQ_PF11	BFIN_PF_IRQ(11)
+#define IRQ_PF12	BFIN_PF_IRQ(12)
+#define IRQ_PF13	BFIN_PF_IRQ(13)
+#define IRQ_PF14	BFIN_PF_IRQ(14)
+#define IRQ_PF15	BFIN_PF_IRQ(15)
+
+#define BFIN_PG_IRQ(x)	((x) + IRQ_PF15 + 1)
+#define IRQ_PG0		BFIN_PG_IRQ(0)
+#define IRQ_PG1		BFIN_PG_IRQ(1)
+#define IRQ_PG2		BFIN_PG_IRQ(2)
+#define IRQ_PG3		BFIN_PG_IRQ(3)
+#define IRQ_PG4		BFIN_PG_IRQ(4)
+#define IRQ_PG5		BFIN_PG_IRQ(5)
+#define IRQ_PG6		BFIN_PG_IRQ(6)
+#define IRQ_PG7		BFIN_PG_IRQ(7)
+#define IRQ_PG8		BFIN_PG_IRQ(8)
+#define IRQ_PG9		BFIN_PG_IRQ(9)
+#define IRQ_PG10	BFIN_PG_IRQ(10)
+#define IRQ_PG11	BFIN_PG_IRQ(11)
+#define IRQ_PG12	BFIN_PG_IRQ(12)
+#define IRQ_PG13	BFIN_PG_IRQ(13)
+#define IRQ_PG14	BFIN_PG_IRQ(14)
+#define IRQ_PG15	BFIN_PG_IRQ(15)
+
+#define BFIN_PH_IRQ(x)	((x) + IRQ_PG15 + 1)
+#define IRQ_PH0		BFIN_PH_IRQ(0)
+#define IRQ_PH1		BFIN_PH_IRQ(1)
+#define IRQ_PH2		BFIN_PH_IRQ(2)
+#define IRQ_PH3		BFIN_PH_IRQ(3)
+#define IRQ_PH4		BFIN_PH_IRQ(4)
+#define IRQ_PH5		BFIN_PH_IRQ(5)
+#define IRQ_PH6		BFIN_PH_IRQ(6)
+#define IRQ_PH7		BFIN_PH_IRQ(7)
+#define IRQ_PH8		BFIN_PH_IRQ(8)
+#define IRQ_PH9		BFIN_PH_IRQ(9)
+#define IRQ_PH10	BFIN_PH_IRQ(10)
+#define IRQ_PH11	BFIN_PH_IRQ(11)
+#define IRQ_PH12	BFIN_PH_IRQ(12)
+#define IRQ_PH13	BFIN_PH_IRQ(13)
+#define IRQ_PH14	BFIN_PH_IRQ(14)		/* N/A */
+#define IRQ_PH15	BFIN_PH_IRQ(15)		/* N/A */
+
+#define BFIN_PI_IRQ(x)	((x) + IRQ_PH15 + 1)
+#define IRQ_PI0		BFIN_PI_IRQ(0)
+#define IRQ_PI1		BFIN_PI_IRQ(1)
+#define IRQ_PI2		BFIN_PI_IRQ(2)
+#define IRQ_PI3		BFIN_PI_IRQ(3)
+#define IRQ_PI4		BFIN_PI_IRQ(4)
+#define IRQ_PI5		BFIN_PI_IRQ(5)
+#define IRQ_PI6		BFIN_PI_IRQ(6)
+#define IRQ_PI7		BFIN_PI_IRQ(7)
+#define IRQ_PI8		BFIN_PI_IRQ(8)
+#define IRQ_PI9		BFIN_PI_IRQ(9)
+#define IRQ_PI10	BFIN_PI_IRQ(10)
+#define IRQ_PI11	BFIN_PI_IRQ(11)
+#define IRQ_PI12	BFIN_PI_IRQ(12)
+#define IRQ_PI13	BFIN_PI_IRQ(13)
+#define IRQ_PI14	BFIN_PI_IRQ(14)
+#define IRQ_PI15	BFIN_PI_IRQ(15)
+
+#if 0
+#define BFIN_PJ_IRQ(x)	((x) + IRQ_PI15 + 1)
+#define IRQ_PJ0		BFIN_PJ_IRQ(0)
+#define IRQ_PJ1		BFIN_PJ_IRQ(1)
+#define IRQ_PJ2		BFIN_PJ_IRQ(2)
+#define IRQ_PJ3		BFIN_PJ_IRQ(3)
+#define IRQ_PJ4		BFIN_PJ_IRQ(4)
+#define IRQ_PJ5		BFIN_PJ_IRQ(5)
+#define IRQ_PJ6		BFIN_PJ_IRQ(6)
+#define IRQ_PJ7		BFIN_PJ_IRQ(7)
+#define IRQ_PJ8		BFIN_PJ_IRQ(8)
+#define IRQ_PJ9		BFIN_PJ_IRQ(9)
+#define IRQ_PJ10	BFIN_PJ_IRQ(10)
+#define IRQ_PJ11	BFIN_PJ_IRQ(11)
+#define IRQ_PJ12	BFIN_PJ_IRQ(12)
+#define IRQ_PJ13	BFIN_PJ_IRQ(13)
+#define IRQ_PJ14	BFIN_PJ_IRQ(14)		/* N/A */
+#define IRQ_PJ15	BFIN_PJ_IRQ(15)		/* N/A */
+#endif
 
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
-#define NR_IRQS     (IRQ_PE15+1)
+#define NR_IRQS     (IRQ_PI15+1)
 #else
 #define NR_IRQS     (SYS_IRQS+1)
 #endif