Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: revert "save ARCH & CROSS_COMPILE ..."
warn about use of uninstalled kernel headers
kbuild: mkcompile_h: trivial cleanups
kbuild: fix warning when domainname is not available
kbuild: Fix size_append issue for bzip2/lzma kernel
kbuild,scripts: use non-builtin echo for '-e'
kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 570f9bd..05d5cf1 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -123,10 +123,18 @@
sb=n Use alternate superblock at this location.
-quota
-noquota
-grpquota
-usrquota
+quota These options are ignored by the filesystem. They
+noquota are used only by quota tools to recognize volumes
+grpquota where quota should be turned on. See documentation
+usrquota in the quota-tools package for more details
+ (http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type> These options tell filesystem details about quota
+usrjquota=<file> so that quota information can be properly updated
+grpjquota=<file> during journal replay. They replace the above
+ quota options. See documentation in the quota-tools
+ package for more details
+ (http://sourceforge.net/projects/linuxquota).
bh (*) ext3 associates buffer heads to data pages to
nobh (a) cache disk block mapping information
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 75fddb4..4c7f9ae 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -359,6 +359,7 @@
5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
+ volknob Fixes with volume-knob widget 0x24
auto BIOS setup (default)
STAC92HD71B*
diff --git a/MAINTAINERS b/MAINTAINERS
index 69e31aa..ff96884 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -577,6 +577,11 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M: Hubert Feurstein <hubert.feurstein@contec.at>
+S: Maintained
+F: arch/arm/mach-ep93xx/micro9.c
+
ARM/CORGI MACHINE SUPPORT
M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
diff --git a/Makefile b/Makefile
index 8e5aaee..3267915 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 32
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 63a481f..338ff19 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -84,7 +84,7 @@
*p = res | mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
static inline int
@@ -101,7 +101,7 @@
*p = res & ~mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
static inline int
@@ -118,7 +118,7 @@
*p = res ^ mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
#include <asm-generic/bitops/non-atomic.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 467b69e..f838f36 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -45,21 +45,21 @@
__setup("user_debug=", user_debug_setup);
#endif
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
- printk("[<%08lx>] ", where);
- print_symbol("(%s) ", where);
- printk("from [<%08lx>] ", from);
- print_symbol("(%s)\n", from);
+ char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+ sprint_symbol(sym1, where);
+ sprint_symbol(sym2, from);
+ printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif
if (in_exception_text(where))
- dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+ dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
#ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@
/*
* Dump out the contents of some memory nicely...
*/
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+ unsigned long top)
{
- unsigned long p = bottom & ~31;
+ unsigned long first;
mm_segment_t fs;
int i;
@@ -95,33 +96,37 @@
fs = get_fs();
set_fs(KERNEL_DS);
- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+ printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
- for (p = bottom & ~31; p < top;) {
- printk("%04lx: ", p & 0xffff);
+ for (first = bottom & ~31; first < top; first += 32) {
+ unsigned long p;
+ char str[sizeof(" 12345678") * 8 + 1];
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
+ memset(str, ' ', sizeof(str));
+ str[sizeof(str) - 1] = '\0';
- if (p < bottom || p >= top)
- printk(" ");
- else {
- __get_user(val, (unsigned long *)p);
- printk("%08x ", val);
+ for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+ if (p >= bottom && p < top) {
+ unsigned long val;
+ if (__get_user(val, (unsigned long *)p) == 0)
+ sprintf(str + i * 9, " %08lx", val);
+ else
+ sprintf(str + i * 9, " ????????");
}
}
- printk ("\n");
+ printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
}
set_fs(fs);
}
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
{
unsigned long addr = instruction_pointer(regs);
const int thumb = thumb_mode(regs);
const int width = thumb ? 4 : 8;
mm_segment_t fs;
+ char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
int i;
/*
@@ -132,7 +137,6 @@
fs = get_fs();
set_fs(KERNEL_DS);
- printk("Code: ");
for (i = -4; i < 1; i++) {
unsigned int val, bad;
@@ -142,13 +146,14 @@
bad = __get_user(val, &((u32 *)addr)[i]);
if (!bad)
- printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+ p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+ width, val);
else {
- printk("bad PC value.");
+ p += sprintf(p, "bad PC value");
break;
}
}
- printk("\n");
+ printk("%sCode: %s\n", lvl, str);
set_fs(fs);
}
@@ -224,18 +229,19 @@
struct task_struct *tsk = thread->task;
static int die_counter;
- printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+ printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
str, err, ++die_counter);
+ sysfs_printk_last_file();
print_modules();
__show_regs(regs);
- printk("Process %s (pid: %d, stack limit = 0x%p)\n",
- tsk->comm, task_pid_nr(tsk), thread + 1);
+ printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+ TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
if (!user_mode(regs) || in_interrupt()) {
- dump_mem("Stack: ", regs->ARM_sp,
+ dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
THREAD_SIZE + (unsigned long)task_stack_page(tsk));
dump_backtrace(regs, tsk);
- dump_instr(regs);
+ dump_instr(KERN_EMERG, regs);
}
}
@@ -250,13 +256,14 @@
oops_enter();
- console_verbose();
spin_lock_irq(&die_lock);
+ console_verbose();
bust_spinlocks(1);
__die(str, err, thread, regs);
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
+ oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@
if (panic_on_oops)
panic("Fatal exception");
- oops_exit();
do_exit(SIGSEGV);
}
@@ -349,7 +355,7 @@
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
current->comm, task_pid_nr(current), pc);
- dump_instr(regs);
+ dump_instr(KERN_INFO, regs);
}
#endif
@@ -400,7 +406,7 @@
if (user_debug & UDBG_SYSCALL) {
printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
task_pid_nr(current), current->comm, n);
- dump_instr(regs);
+ dump_instr(KERN_ERR, regs);
}
#endif
@@ -579,7 +585,7 @@
if (user_debug & UDBG_SYSCALL) {
printk("[%d] %s: arm syscall %d\n",
task_pid_nr(current), current->comm, no);
- dump_instr(regs);
+ dump_instr("", regs);
if (user_mode(regs)) {
__show_regs(regs);
c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -656,7 +662,7 @@
if (user_debug & UDBG_BADABORT) {
printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
task_pid_nr(current), current->comm, code, instr);
- dump_instr(regs);
+ dump_instr(KERN_ERR, regs);
show_pte(current->mm, addr);
}
#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 4b4f692..e590bbe 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -271,12 +271,12 @@
.handler = bcmring_timer_interrupt,
};
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
{
return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
}
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
{
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
}
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index cdbf93c..38b3706 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -29,7 +29,7 @@
cpu_do_idle();
}
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
{
printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index d7291c6..9167c3d 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -17,13 +17,31 @@
bool "0x00000000 - SDCE3/SyncBoot"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0x00000000
+ first SDRAM bank at 0x00000000.
config EP93XX_SDCE0_PHYS_OFFSET
bool "0xc0000000 - SDCEO"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xc0000000
+ first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+ bool "0xd0000000 - SDCE1"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+ bool "0xe0000000 - SDCE2"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ bool "0xf0000000 - SDCE3/AsyncBoot"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xf0000000.
endchoice
@@ -112,28 +130,36 @@
bool
config MACH_MICRO9H
- bool "Support Contec Hypercontrol Micro9-H"
+ bool "Support Contec Micro9-High"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-H board.
+ Contec Micro9-High board.
config MACH_MICRO9M
- bool "Support Contec Hypercontrol Micro9-M"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ bool "Support Contec Micro9-Mid"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-M board.
+ Contec Micro9-Mid board.
config MACH_MICRO9L
- bool "Support Contec Hypercontrol Micro9-L"
+ bool "Support Contec Micro9-Lite"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-L board.
+ Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+ bool "Support Contec Micro9-Slim"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-Slim board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
index 27a085a..0ad33f1 100644
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -3,3 +3,12 @@
zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index dda19cd7..1d0f9d8 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,13 +16,16 @@
#include <linux/module.h>
#include <linux/string.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
-#include <mach/hardware.h>
struct clk {
+ struct clk *parent;
unsigned long rate;
int users;
int sw_locked;
@@ -39,40 +42,60 @@
static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
static int set_div_rate(struct clk *clk, unsigned long rate);
+
+static struct clk clk_xtali = {
+ .rate = EP93XX_EXT_CLK_RATE,
+};
static struct clk clk_uart1 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
.get_rate = get_uart_rate,
};
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+ .parent = &clk_xtali,
+};
+static struct clk clk_f = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_h = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_p = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_pll2 = {
+ .parent = &clk_xtali,
+};
static struct clk clk_usb_host = {
+ .parent = &clk_pll2,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
static struct clk clk_keypad = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
.enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
.set_rate = set_keytchclk_rate,
};
static struct clk clk_pwm = {
+ .parent = &clk_xtali,
.rate = EP93XX_EXT_CLK_RATE,
};
@@ -85,50 +108,62 @@
/* DMA Clocks */
static struct clk clk_m2p0 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
};
static struct clk clk_m2p1 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
};
static struct clk clk_m2p2 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
};
static struct clk clk_m2p3 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
};
static struct clk clk_m2p4 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
};
static struct clk clk_m2p5 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
};
static struct clk clk_m2p6 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
};
static struct clk clk_m2p7 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
};
static struct clk clk_m2p8 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
};
static struct clk clk_m2p9 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
};
static struct clk clk_m2m0 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
};
static struct clk clk_m2m1 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
};
@@ -137,6 +172,7 @@
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
+ INIT_CK(NULL, "xtali", &clk_xtali),
INIT_CK("apb:uart1", NULL, &clk_uart1),
INIT_CK("apb:uart2", NULL, &clk_uart2),
INIT_CK("apb:uart3", NULL, &clk_uart3),
@@ -163,48 +199,84 @@
INIT_CK(NULL, "m2m1", &clk_m2m1),
};
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (!clk->users++) {
+ if (clk->parent)
+ __clk_enable(clk->parent);
+
+ if (clk->enable_reg) {
+ u32 v;
+
+ v = __raw_readl(clk->enable_reg);
+ v |= clk->enable_mask;
+ if (clk->sw_locked)
+ ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+ else
+ __raw_writel(v, clk->enable_reg);
+ }
+ }
+}
int clk_enable(struct clk *clk)
{
- if (!clk->users++ && clk->enable_reg) {
- u32 value;
+ unsigned long flags;
- value = __raw_readl(clk->enable_reg);
- value |= clk->enable_mask;
- if (clk->sw_locked)
- ep93xx_syscon_swlocked_write(value, clk->enable_reg);
- else
- __raw_writel(value, clk->enable_reg);
- }
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
+static void __clk_disable(struct clk *clk)
+{
+ if (!--clk->users) {
+ if (clk->enable_reg) {
+ u32 v;
+
+ v = __raw_readl(clk->enable_reg);
+ v &= ~clk->enable_mask;
+ if (clk->sw_locked)
+ ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+ else
+ __raw_writel(v, clk->enable_reg);
+ }
+
+ if (clk->parent)
+ __clk_disable(clk->parent);
+ }
+}
+
void clk_disable(struct clk *clk)
{
- if (!--clk->users && clk->enable_reg) {
- u32 value;
+ unsigned long flags;
- value = __raw_readl(clk->enable_reg);
- value &= ~clk->enable_mask;
- if (clk->sw_locked)
- ep93xx_syscon_swlocked_write(value, clk->enable_reg);
- else
- __raw_writel(value, clk->enable_reg);
- }
+ if (!clk)
+ return;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
static unsigned long get_uart_rate(struct clk *clk)
{
+ unsigned long rate = clk_get_rate(clk->parent);
u32 value;
value = __raw_readl(EP93XX_SYSCON_PWRCNT);
if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
- return EP93XX_EXT_CLK_RATE;
+ return rate;
else
- return EP93XX_EXT_CLK_RATE / 2;
+ return rate / 2;
}
unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@
return 0;
}
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
- int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+ int *psel, int *esel, int *pdiv, int *div)
{
- unsigned long max_rate, best_rate = 0,
- actual_rate = 0, mclk_rate = 0, rate_err = -1;
+ struct clk *mclk;
+ unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
int i, found = 0, __div = 0, __pdiv = 0;
/* Don't exceed the maximum rate */
max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
- (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+ clk_xtali.rate / 4);
rate = min(rate, max_rate);
/*
@@ -267,11 +339,12 @@
*/
for (i = 0; i < 3; i++) {
if (i == 0)
- mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+ mclk = &clk_xtali;
else if (i == 1)
- mclk_rate = clk_pll1.rate * 2;
- else if (i == 2)
- mclk_rate = clk_pll2.rate * 2;
+ mclk = &clk_pll1;
+ else
+ mclk = &clk_pll2;
+ mclk_rate = mclk->rate * 2;
/* Try each predivider value */
for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@
*div = __div;
*psel = (i == 2);
*esel = (i != 0);
- best_rate = actual_rate;
+ clk->parent = mclk;
+ clk->rate = actual_rate;
rate_err = abs(actual_rate - rate);
found = 1;
}
@@ -294,21 +368,19 @@
}
if (!found)
- return 0;
+ return -EINVAL;
- return best_rate;
+ return 0;
}
static int set_div_rate(struct clk *clk, unsigned long rate)
{
- unsigned long actual_rate;
- int psel = 0, esel = 0, pdiv = 0, div = 0;
+ int err, psel = 0, esel = 0, pdiv = 0, div = 0;
u32 val;
- actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
- if (actual_rate == 0)
- return -EINVAL;
- clk->rate = actual_rate;
+ err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+ if (err)
+ return err;
/* Clear the esel, psel, pdiv and div bits */
val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@
unsigned long long rate;
int i;
- rate = EP93XX_EXT_CLK_RATE;
+ rate = clk_xtali.rate;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
@@ -377,7 +449,7 @@
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
- clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+ clk_pll1.rate = clk_xtali.rate;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
@@ -388,7 +460,7 @@
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
- clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+ clk_pll2.rate = clk_xtali.rate;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f7ebed9..f95dc16 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -550,13 +550,11 @@
platform_device_register(&ep93xx_eth_device);
}
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
- .sda_pin = EP93XX_GPIO_LINE_EEDAT,
- .sda_is_open_drain = 0,
- .scl_pin = EP93XX_GPIO_LINE_EECLK,
- .scl_is_open_drain = 0,
- .udelay = 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
static struct platform_device ep93xx_i2c_device = {
.name = "i2c-gpio",
@@ -564,8 +562,25 @@
.dev.platform_data = &ep93xx_i2c_data,
};
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+ struct i2c_board_info *devices, int num)
{
+ /*
+ * Set the EEPROM interface pin drive type control.
+ * Defines the driver type for the EECLK and EEDAT pins as either
+ * open drain, which will require an external pull-up, or a normal
+ * CMOS driver.
+ */
+ if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+ pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+ if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+ pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+ __raw_writel((data->sda_is_open_drain << 1) |
+ (data->scl_is_open_drain << 0),
+ EP93XX_GPIO_EEDRIVE);
+
+ ep93xx_i2c_data = *data;
i2c_register_board_info(0, devices, num);
platform_device_register(&ep93xx_i2c_device);
}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 73145ae..ca71cf1 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,8 +27,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
@@ -76,13 +78,26 @@
.phy_id = 1,
};
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0, /* default to 100 kHz */
+ .timeout = 0, /* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
{
I2C_BOARD_INFO("isl1208", 0x6f),
},
};
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
{
I2C_BOARD_INFO("ds1337", 0x68),
},
@@ -92,12 +107,14 @@
{
if (machine_is_edb9302a() || machine_is_edb9307a() ||
machine_is_edb9315a()) {
- ep93xx_register_i2c(edb93xxa_i2c_data,
- ARRAY_SIZE(edb93xxa_i2c_data));
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+ edb93xxa_i2c_board_info,
+ ARRAY_SIZE(edb93xxa_i2c_board_info));
} else if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
- ep93xx_register_i2c(edb93xx_i2c_data,
- ARRAY_SIZE(edb93xx_i2c_data));
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+ edb93xx_i2c_board_info,
+ ARRAY_SIZE(edb93xx_i2c_board_info));
}
}
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 0fbf87b..b1f937e 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,25 +52,27 @@
#define EP93XX_AHB_VIRT_BASE 0xfef00000
#define EP93XX_AHB_SIZE 0x00100000
+#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x))
#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
#define EP93XX_APB_PHYS_BASE 0x80800000
#define EP93XX_APB_VIRT_BASE 0xfed00000
#define EP93XX_APB_SIZE 0x00200000
+#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
/* AHB peripherals */
#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-#define EP93XX_RASTER_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
@@ -134,13 +125,13 @@
#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000)
#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
+#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
index 0a1498a..c991b14 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -114,17 +114,9 @@
* B0..B7 (7..15) to irq 72..79, and
* F0..F7 (16..24) to irq 80..87.
*/
-static inline int gpio_to_irq(unsigned gpio)
-{
- if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
- return 64 + gpio;
+#define gpio_to_irq(gpio) \
+ (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq - gpio_to_irq(0);
-}
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
index 925b12e..554064e 100644
--- a/arch/arm/mach-ep93xx/include/mach/memory.h
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -9,6 +9,12 @@
#define PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xf0000000)
#else
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 01a0f08..a3ec33f 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,6 +4,7 @@
#ifndef __ASSEMBLY__
+struct i2c_gpio_platform_data;
struct i2c_board_info;
struct platform_device;
struct ep93xxfb_mach_info;
@@ -33,7 +34,8 @@
}
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+ struct i2c_board_info *devices, int num);
void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 0a313e8..d83b804 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -2,7 +2,9 @@
* linux/arch/arm/mach-ep93xx/micro9.c
*
* Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- * Manfred Gruber <manfred.gruber@contec.at>
+ * Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ * Hubert Feurstein <hubert.feurstein@contec.at>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
#include <asm/mach/arch.h>
-static struct ep93xx_eth_data micro9_eth_data = {
- .phy_id = 0x1f,
-};
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
-static void __init micro9_init(void)
-{
- ep93xx_register_eth(µ9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
- .width = 4,
-};
-
-static struct resource micro9h_flash_resource = {
+static struct resource micro9_flash_resource = {
.start = EP93XX_CS1_PHYS_BASE,
.end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = µ9h_flash_data,
+ .platform_data = µ9_flash_data,
},
.num_resources = 1,
- .resource = µ9h_flash_resource,
+ .resource = µ9_flash_resource,
};
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
{
- platform_device_register(µ9h_flash);
+ micro9_flash_data.width = width;
+
+ platform_device_register(µ9_flash);
}
-static void __init micro9h_init_machine(void)
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+ u32 v;
+
+ /* Detect the bus width of the external flash memory */
+ v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+ if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+ return 4; /* 32-bit */
+ else
+ return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
+{
+ if (machine_is_micro9())
+ __micro9_register_flash(4);
+ else if (machine_is_micro9m() || machine_is_micro9s())
+ __micro9_register_flash(micro9_detect_bootwidth());
+}
+
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+ .phy_id = 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
{
ep93xx_init_devices();
- micro9_init();
- micro9h_init();
+ ep93xx_register_eth(µ9_eth_data, 1);
+ micro9_register_flash();
}
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9h_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
-/*
- * Micro9-M
- */
#ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
- ep93xx_init_devices();
- micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9m_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
-/*
- * Micro9-L
- */
#ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
- ep93xx_init_devices();
- micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9l_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9_init_machine,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 3a8ee22..983cc8c 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -155,7 +155,7 @@
static pxa_freqs_t pxa27x_freqs[] = {
{104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
- {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+ {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 79141f8..965480e 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -238,7 +238,7 @@
};
struct smsc911x_platform_config csb726_lan_config = {
- .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8a5546e..bb7b819 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,6 +25,7 @@
obj-$(CONFIG_SA1100_COLLIE) += collie.o
+obj-$(CONFIG_SA1100_H3100) += h3600.o
obj-$(CONFIG_SA1100_H3600) += h3600.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 8f5c13f..295e25d 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -12,6 +12,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/unwind.h>
#include "proc-macros.S"
@@ -121,11 +122,13 @@
* - the Icache does not read data from the write buffer
*/
ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart )
#ifdef HARVARD_CACHE
bic r0, r0, #CACHE_LINE_SIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D line
+1:
+ USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line
add r0, r0, #CACHE_LINE_SIZE
+2:
cmp r0, r1
blo 1b
#endif
@@ -143,6 +146,19 @@
mov pc, lr
/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+ mov r0, r0, lsr #12
+ mov r0, r0, lsl #12
+ add r0, r0, #4096
+ b 2b
+ UNWIND(.fnend )
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
+/*
* v6_flush_kern_dcache_page(kaddr)
*
* Ensure that the data held in the page kaddr is written back
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index bda0ec3..e1bd975 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -13,6 +13,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/unwind.h>
#include "proc-macros.S"
@@ -153,13 +154,16 @@
* - the Icache does not read data from the write buffer
*/
ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
-1: mcr p15, 0, r0, c7, c11, 1 @ clean D line to the point of unification
+1:
+ USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
dsb
- mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
+ USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
add r0, r0, r2
+2:
cmp r0, r1
blo 1b
mov r0, #0
@@ -167,6 +171,17 @@
dsb
isb
mov pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+ mov r0, r0, lsr #12
+ mov r0, r0, lsl #12
+ add r0, r0, #4096
+ b 2b
+ UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index bc0099d..d0d17b6 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -153,14 +153,11 @@
page = pfn_to_page(pfn);
mapping = page_mapping(page);
- if (mapping) {
#ifndef CONFIG_SMP
- int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
- if (dirty)
- __flush_dcache_page(mapping, page);
+ if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+ __flush_dcache_page(mapping, page);
#endif
-
+ if (mapping) {
if (cache_is_vivt())
make_coherent(mapping, vma, addr, pfn);
else if (vma->vm_flags & VM_EXEC)
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ae0e25f..10e0680 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -292,6 +292,11 @@
* down_read()
*/
might_sleep();
+#ifdef CONFIG_DEBUG_VM
+ if (!user_mode(regs) &&
+ !search_exception_tables(regs->ARM_pc))
+ goto no_context;
+#endif
}
fault = __do_page_fault(mm, addr, fsr, tsk);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 73cae57..30f82fb 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -46,6 +46,8 @@
if (!PageHighMem(page))
return page_address(page);
+ debug_kmap_atomic(type);
+
kmap = kmap_high_get(page);
if (kmap)
return kmap;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 877c492..40940d7 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -483,7 +483,7 @@
/*
* Convert start_pfn/end_pfn to a struct page pointer.
*/
- start_pg = pfn_to_page(start_pfn);
+ start_pg = pfn_to_page(start_pfn - 1) + 1;
end_pg = pfn_to_page(end_pfn);
/*
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 85419bb..d17d482 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1378,8 +1378,8 @@
if (mb < 16)
return 1024*1024;
- /* To 32MB for anything above that */
- return 32*1024*1024;
+ /* To 64MB for anything above that */
+ return 64*1024*1024;
}
#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index d20009b..b2a71dc 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -311,7 +311,7 @@
amd_iommu_shutdown();
}
/* Must execute after PCI subsystem */
-fs_initcall(pci_iommu_init);
+rootfs_initcall(pci_iommu_init);
#ifdef CONFIG_PCI
/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
index aac0985..31e7c91 100644
--- a/drivers/char/genrtc.c
+++ b/drivers/char/genrtc.c
@@ -43,6 +43,7 @@
#define RTC_VERSION "1.07"
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/fcntl.h>
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index e0d0f8b..bc4ab3e 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -74,6 +74,7 @@
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
+#include <linux/sched.h>
#include <linux/sysctl.h>
#include <linux/wait.h>
#include <linux/bcd.h>
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index fd3dced..8c262aaf7 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -36,6 +36,7 @@
*/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/input.h>
#include <linux/pci.h>
#include <linux/init.h>
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index be34d32..7d05c4b 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1066,7 +1066,7 @@
* @type: HID report type (HID_*_REPORT)
* @data: report contents
* @size: size of data parameter
- * @interrupt: called from atomic?
+ * @interrupt: distinguish between interrupt and control transfers
*
* This is data entry for lower layers.
*/
diff --git a/drivers/hid/hid-twinhan.c b/drivers/hid/hid-twinhan.c
index b05f602..c40afc5 100644
--- a/drivers/hid/hid-twinhan.c
+++ b/drivers/hid/hid-twinhan.c
@@ -132,12 +132,12 @@
.input_mapping = twinhan_input_mapping,
};
-static int twinhan_init(void)
+static int __init twinhan_init(void)
{
return hid_register_driver(&twinhan_driver);
}
-static void twinhan_exit(void)
+static void __exit twinhan_exit(void)
{
hid_unregister_driver(&twinhan_driver);
}
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index ba05275..cdd1369 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -48,10 +48,9 @@
char *report;
DECLARE_WAITQUEUE(wait, current);
+ mutex_lock(&list->read_mutex);
+
while (ret == 0) {
-
- mutex_lock(&list->read_mutex);
-
if (list->head == list->tail) {
add_wait_queue(&list->hidraw->wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index e424cf6..e832e97 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -480,7 +480,6 @@
add_children(struct twl4030_platform_data *pdata, unsigned long features)
{
struct device *child;
- struct device *usb_transceiver = NULL;
if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
child = add_child(3, "twl4030_bci",
@@ -532,16 +531,61 @@
}
if (twl_has_usb() && pdata->usb) {
+
+ static struct regulator_consumer_supply usb1v5 = {
+ .supply = "usb1v5",
+ };
+ static struct regulator_consumer_supply usb1v8 = {
+ .supply = "usb1v8",
+ };
+ static struct regulator_consumer_supply usb3v1 = {
+ .supply = "usb3v1",
+ };
+
+ /* First add the regulators so that they can be used by transceiver */
+ if (twl_has_regulator()) {
+ /* this is a template that gets copied */
+ struct regulator_init_data usb_fixed = {
+ .constraints.valid_modes_mask =
+ REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .constraints.valid_ops_mask =
+ REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ };
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V5,
+ &usb_fixed, &usb1v5, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V8,
+ &usb_fixed, &usb1v8, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB3V1,
+ &usb_fixed, &usb3v1, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ }
+
child = add_child(0, "twl4030_usb",
pdata->usb, sizeof(*pdata->usb),
true,
/* irq0 = USB_PRES, irq1 = USB */
pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+
if (IS_ERR(child))
return PTR_ERR(child);
/* we need to connect regulators to this transceiver */
- usb_transceiver = child;
+ if (twl_has_regulator() && child) {
+ usb1v5.dev = child;
+ usb1v8.dev = child;
+ usb3v1.dev = child;
+ }
}
if (twl_has_watchdog()) {
@@ -580,47 +624,6 @@
return PTR_ERR(child);
}
- if (twl_has_regulator() && usb_transceiver) {
- static struct regulator_consumer_supply usb1v5 = {
- .supply = "usb1v5",
- };
- static struct regulator_consumer_supply usb1v8 = {
- .supply = "usb1v8",
- };
- static struct regulator_consumer_supply usb3v1 = {
- .supply = "usb3v1",
- };
-
- /* this is a template that gets copied */
- struct regulator_init_data usb_fixed = {
- .constraints.valid_modes_mask =
- REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .constraints.valid_ops_mask =
- REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- };
-
- usb1v5.dev = usb_transceiver;
- usb1v8.dev = usb_transceiver;
- usb3v1.dev = usb_transceiver;
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
- &usb1v5, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed,
- &usb1v8, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed,
- &usb3v1, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
/* maybe add LDOs that are omitted on cost-reduced parts */
if (twl_has_regulator() && !(features & TPS_SUBSET)) {
child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 5e0b152..b00d673 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -693,7 +693,7 @@
if (gpio_is_valid(gpio_ro)) {
ret = gpio_request(gpio_ro, "mmc card read only");
if (ret) {
- dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power);
+ dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
goto err_gpio_ro;
}
gpio_direction_input(gpio_ro);
@@ -701,7 +701,7 @@
if (gpio_is_valid(gpio_cd)) {
ret = gpio_request(gpio_cd, "mmc card detect");
if (ret) {
- dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power);
+ dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
goto err_gpio_cd;
}
gpio_direction_input(gpio_cd);
diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c
index 9693b0f..0bd898c 100644
--- a/drivers/net/wan/c101.c
+++ b/drivers/net/wan/c101.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index 83da596..58c6681 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index a52f29c..f1340fa 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index 14bbaa1..22b02c6 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -354,6 +354,7 @@
struct acpi_dmar_hardware_unit *drhd;
struct acpi_dmar_reserved_memory *rmrr;
struct acpi_dmar_atsr *atsr;
+ struct acpi_dmar_rhsa *rhsa;
switch (header->type) {
case ACPI_DMAR_TYPE_HARDWARE_UNIT:
@@ -375,6 +376,12 @@
atsr = container_of(header, struct acpi_dmar_atsr, header);
printk(KERN_INFO PREFIX "ATSR flags: %#x\n", atsr->flags);
break;
+ case ACPI_DMAR_HARDWARE_AFFINITY:
+ rhsa = container_of(header, struct acpi_dmar_rhsa, header);
+ printk(KERN_INFO PREFIX "RHSA base: %#016Lx proximity domain: %#x\n",
+ (unsigned long long)rhsa->base_address,
+ rhsa->proximity_domain);
+ break;
}
}
@@ -459,9 +466,13 @@
ret = dmar_parse_one_atsr(entry_header);
#endif
break;
+ case ACPI_DMAR_HARDWARE_AFFINITY:
+ /* We don't do anything with RHSA (yet?) */
+ break;
default:
printk(KERN_WARNING PREFIX
- "Unknown DMAR structure type\n");
+ "Unknown DMAR structure type %d\n",
+ entry_header->type);
ret = 0; /* for forward compatibility */
break;
}
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 5383600..9c6a9fd 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -32,6 +32,7 @@
#include <asm/io.h> /* for read? and write? functions */
#include <linux/delay.h> /* for delays */
#include <linux/mutex.h>
+#include <linux/sched.h> /* for signal_pending() */
#define MY_NAME "cpqphp"
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 855dd7c..b1e97e6 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -48,6 +48,7 @@
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
+#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
#define IOAPIC_RANGE_START (0xfee00000)
#define IOAPIC_RANGE_END (0xfeefffff)
@@ -94,6 +95,7 @@
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
+static void __init check_tylersburg_isoch(void);
static int rwbf_quirk;
/*
@@ -1934,6 +1936,9 @@
}
static int iommu_identity_mapping;
+#define IDENTMAP_ALL 1
+#define IDENTMAP_GFX 2
+#define IDENTMAP_AZALIA 4
static int iommu_domain_identity_map(struct dmar_domain *domain,
unsigned long long start,
@@ -2151,8 +2156,14 @@
static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
{
- if (iommu_identity_mapping == 2)
- return IS_GFX_DEVICE(pdev);
+ if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev))
+ return 1;
+
+ if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
+ return 1;
+
+ if (!(iommu_identity_mapping & IDENTMAP_ALL))
+ return 0;
/*
* We want to start off with all devices in the 1:1 domain, and
@@ -2332,11 +2343,14 @@
}
if (iommu_pass_through)
- iommu_identity_mapping = 1;
+ iommu_identity_mapping |= IDENTMAP_ALL;
+
#ifdef CONFIG_DMAR_BROKEN_GFX_WA
- else
- iommu_identity_mapping = 2;
+ iommu_identity_mapping |= IDENTMAP_GFX;
#endif
+
+ check_tylersburg_isoch();
+
/*
* If pass through is not set or not enabled, setup context entries for
* identity mappings for rmrr, gfx, and isa and may fall back to static
@@ -3670,3 +3684,61 @@
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+
+/* On Tylersburg chipsets, some BIOSes have been known to enable the
+ ISOCH DMAR unit for the Azalia sound device, but not give it any
+ TLB entries, which causes it to deadlock. Check for that. We do
+ this in a function called from init_dmars(), instead of in a PCI
+ quirk, because we don't want to print the obnoxious "BIOS broken"
+ message if VT-d is actually disabled.
+*/
+static void __init check_tylersburg_isoch(void)
+{
+ struct pci_dev *pdev;
+ uint32_t vtisochctrl;
+
+ /* If there's no Azalia in the system anyway, forget it. */
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL);
+ if (!pdev)
+ return;
+ pci_dev_put(pdev);
+
+ /* System Management Registers. Might be hidden, in which case
+ we can't do the sanity check. But that's OK, because the
+ known-broken BIOSes _don't_ actually hide it, so far. */
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL);
+ if (!pdev)
+ return;
+
+ if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) {
+ pci_dev_put(pdev);
+ return;
+ }
+
+ pci_dev_put(pdev);
+
+ /* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */
+ if (vtisochctrl & 1)
+ return;
+
+ /* Drop all bits other than the number of TLB entries */
+ vtisochctrl &= 0x1c;
+
+ /* If we have the recommended number of TLB entries (16), fine. */
+ if (vtisochctrl == 0x10)
+ return;
+
+ /* Zero TLB entries? You get to ride the short bus to school. */
+ if (!vtisochctrl) {
+ WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n"
+ "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR),
+ dmi_get_system_info(DMI_BIOS_VERSION),
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+ iommu_identity_mapping |= IDENTMAP_AZALIA;
+ return;
+ }
+
+ printk(KERN_WARNING "DMAR: Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n",
+ vtisochctrl);
+}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6edecff..4e4c295 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -513,7 +513,11 @@
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(PCI_PM_D2_DELAY);
- dev->current_state = state;
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ if (dev->current_state != state && printk_ratelimit())
+ dev_info(&dev->dev, "Refused to change power state, "
+ "currently in D%d\n", dev->current_state);
/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
* INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
@@ -2542,10 +2546,10 @@
/**
* pci_set_vga_state - set VGA decode state on device and parents if requested
- * @dev the PCI device
- * @decode - true = enable decoding, false = disable decoding
- * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge - traverse ancestors and change bridges
+ * @dev: the PCI device
+ * @decode: true = enable decoding, false = disable decoding
+ * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
+ * @change_bridge: traverse ancestors and change bridges
*/
int pci_set_vga_state(struct pci_dev *dev, bool decode,
unsigned int command_bits, bool change_bridge)
@@ -2719,17 +2723,6 @@
return 1;
}
-static int __devinit pci_init(void)
-{
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- pci_fixup_device(pci_fixup_final, dev);
- }
-
- return 0;
-}
-
static int __init pci_setup(char *str)
{
while (str) {
@@ -2767,8 +2760,6 @@
}
early_param("pci", pci_setup);
-device_initcall(pci_init);
-
EXPORT_SYMBOL(pci_reenable_device);
EXPORT_SYMBOL(pci_enable_device_io);
EXPORT_SYMBOL(pci_enable_device_mem);
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index d49ecc9..40c3cc5 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -53,7 +53,7 @@
static struct pcie_port_service_driver aerdriver = {
.name = "aer",
- .port_type = PCIE_ANY_PORT,
+ .port_type = PCIE_RC_PORT,
.service = PCIE_PORT_SERVICE_AER,
.probe = aer_probe,
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 6df5c98..f635e47 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -30,7 +30,6 @@
MODULE_LICENSE("GPL");
/* global data */
-static const char device_name[] = "pcieport-driver";
static int pcie_portdrv_restore_config(struct pci_dev *dev)
{
@@ -262,7 +261,7 @@
};
static struct pci_driver pcie_portdriver = {
- .name = (char *)device_name,
+ .name = "pcieport",
.id_table = &port_pci_ids[0],
.probe = pcie_portdrv_probe,
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 6099fac..a790b17 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -670,6 +670,25 @@
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
+/*
+ * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
+ * Disable fast back-to-back on the secondary bus segment
+ */
+static void __devinit quirk_xio2000a(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+ u16 command;
+
+ dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
+ "secondary bus fast back-to-back transfers disabled\n");
+ list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (command & PCI_COMMAND_FAST_BACK)
+ pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
+ quirk_xio2000a);
#ifdef CONFIG_X86_IO_APIC
@@ -2572,6 +2591,19 @@
}
pci_do_fixups(dev, start, end);
}
+
+static int __init pci_apply_final_quirks(void)
+{
+ struct pci_dev *dev = NULL;
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ pci_fixup_device(pci_fixup_final, dev);
+ }
+
+ return 0;
+}
+
+fs_initcall_sync(pci_apply_final_quirks);
#else
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
#endif
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index cb1a027..0959430 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -299,8 +299,17 @@
r = bus->resource[i];
if (r == &ioport_resource || r == &iomem_resource)
continue;
- if (r && (r->flags & type_mask) == type && !r->parent)
- return r;
+ if (r && (r->flags & type_mask) == type) {
+ if (!r->parent)
+ return r;
+ /*
+ * if there is no child under that, we should release
+ * and use it. don't need to reset it, pbus_size_* will
+ * set it again
+ */
+ if (!r->child && !release_resource(r))
+ return r;
+ }
}
return NULL;
}
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 706f82d..c54526b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -205,43 +205,6 @@
return ret;
}
-#if 0
-int pci_assign_resource_fixed(struct pci_dev *dev, int resno)
-{
- struct pci_bus *bus = dev->bus;
- struct resource *res = dev->resource + resno;
- unsigned int type_mask;
- int i, ret = -EBUSY;
-
- type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *r = bus->resource[i];
- if (!r)
- continue;
-
- /* type_mask must match */
- if ((res->flags ^ r->flags) & type_mask)
- continue;
-
- ret = request_resource(r, res);
-
- if (ret == 0)
- break;
- }
-
- if (ret) {
- dev_err(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
- resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
- } else if (resno < PCI_BRIDGE_RESOURCES) {
- pci_update_resource(dev, resno);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(pci_assign_resource_fixed);
-#endif
-
/* Sort resources by alignment */
void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
{
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 1689bda..dcc7244 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1270,6 +1270,9 @@
BUG_ON(!kernel_locked());
+ if (!state)
+ return;
+
uport = state->uart_port;
port = &state->port;
@@ -1316,9 +1319,9 @@
*/
if (port->flags & ASYNC_INITIALIZED) {
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&uport->lock, flags);
uport->ops->stop_rx(uport);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&uport->lock, flags);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 958a3ff..ff5bbb9 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -1826,7 +1826,7 @@
* ST Micro derivative, this has 32bit wide
* and 32 locations deep TX/RX FIFO
*/
- .id = 0x00108022,
+ .id = 0x01080022,
.mask = 0xffffffff,
.data = &vendor_st,
},
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 23cf3bd..83b5f9c 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -475,4 +475,4 @@
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 760e727..b84abd8 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -9,7 +9,7 @@
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
depends on (USB || USB_GADGET)
- depends on !SUPERH
+ depends on (ARM || BLACKFIN)
select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
select NOP_USB_XCEIV if MACH_OMAP3EVM
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 72743d3..7a520a8 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -2321,7 +2321,18 @@
if (!sbh)
return error;
- es->s_wtime = cpu_to_le32(get_seconds());
+ /*
+ * If the file system is mounted read-only, don't update the
+ * superblock write time. This avoids updating the superblock
+ * write time when we are mounting the root file system
+ * read/only but we need to replay the journal; at that point,
+ * for people who are east of GMT and who make their clock
+ * tick in localtime for Windows bug-for-bug compatibility,
+ * the clock is set in the future, and this will cause e2fsck
+ * to complain and force a full file system check.
+ */
+ if (!(sb->s_flags & MS_RDONLY))
+ es->s_wtime = cpu_to_le32(get_seconds());
es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb));
es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
BUFFER_TRACE(sbh, "marking dirty");
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 6dabf6f..a2c18ac 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1848,8 +1848,8 @@
data->timeo != (10U * nfss->client->cl_timeout->to_initval / HZ) ||
data->nfs_server.port != nfss->port ||
data->nfs_server.addrlen != nfss->nfs_client->cl_addrlen ||
- !rpc_cmp_addr(&data->nfs_server.address,
- &nfss->nfs_client->cl_addr))
+ !rpc_cmp_addr((struct sockaddr *)&data->nfs_server.address,
+ (struct sockaddr *)&nfss->nfs_client->cl_addr))
return -EINVAL;
return 0;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index da1fda8..f490e7a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -776,6 +776,7 @@
#define PCI_DEVICE_ID_TI_X515 0x8036
#define PCI_DEVICE_ID_TI_XX12 0x8039
#define PCI_DEVICE_ID_TI_XX12_FM 0x803b
+#define PCI_DEVICE_ID_TI_XIO2000A 0x8231
#define PCI_DEVICE_ID_TI_1130 0xac12
#define PCI_DEVICE_ID_TI_1031 0xac13
#define PCI_DEVICE_ID_TI_1131 0xac15
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index dc78272..1f0f821 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -937,6 +937,7 @@
struct snd_ac97 *ac97;
int ret;
+ writel(0, aaci->base + AC97_POWERDOWN);
/*
* Assert AACIRESET for 2us
*/
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 24585c6..4e2b925 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -808,6 +808,8 @@
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1002, 0x0001, GENERIC),
/* Leadtek Winfast tv 2000xp delux */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC),
+ /* Pinnacle PCTV */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x11bd, 0x0012, GENERIC),
/* Voodoo TV 200 */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC),
/* Askey Computer Corp. MagicTView'99 */
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index c8435c9..9fb6027 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -29,6 +29,9 @@
#include "hda_codec.h"
#include "hda_local.h"
+/* define below to restrict the supported rates and formats */
+/* #define LIMITED_RATE_FMT_SUPPORT */
+
struct nvhdmi_spec {
struct hda_multi_out multiout;
@@ -60,6 +63,22 @@
{} /* terminator */
};
+#ifdef LIMITED_RATE_FMT_SUPPORT
+/* support only the safe format and rate */
+#define SUPPORTED_RATES SNDRV_PCM_RATE_48000
+#define SUPPORTED_MAXBPS 16
+#define SUPPORTED_FORMATS SNDRV_PCM_FMTBIT_S16_LE
+#else
+/* support all rates and formats */
+#define SUPPORTED_RATES \
+ (SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
+ SNDRV_PCM_RATE_192000)
+#define SUPPORTED_MAXBPS 24
+#define SUPPORTED_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+#endif
+
/*
* Controls
*/
@@ -258,9 +277,9 @@
.channels_min = 2,
.channels_max = 8,
.nid = Nv_Master_Convert_nid,
- .rates = SNDRV_PCM_RATE_48000,
- .maxbps = 16,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SUPPORTED_RATES,
+ .maxbps = SUPPORTED_MAXBPS,
+ .formats = SUPPORTED_FORMATS,
.ops = {
.open = nvhdmi_dig_playback_pcm_open,
.close = nvhdmi_dig_playback_pcm_close_8ch,
@@ -273,9 +292,9 @@
.channels_min = 2,
.channels_max = 2,
.nid = Nv_Master_Convert_nid,
- .rates = SNDRV_PCM_RATE_48000,
- .maxbps = 16,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SUPPORTED_RATES,
+ .maxbps = SUPPORTED_MAXBPS,
+ .formats = SUPPORTED_FORMATS,
.ops = {
.open = nvhdmi_dig_playback_pcm_open,
.close = nvhdmi_dig_playback_pcm_close_2ch,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 470fd74..c08ca66 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -275,7 +275,7 @@
struct snd_kcontrol_new *cap_mixer; /* capture mixer */
unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */
- const struct hda_verb *init_verbs[5]; /* initialization verbs
+ const struct hda_verb *init_verbs[10]; /* initialization verbs
* don't forget NULL
* termination!
*/
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index a9b2682..66c0876 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -158,6 +158,7 @@
STAC_D965_5ST_NO_FP,
STAC_DELL_3ST,
STAC_DELL_BIOS,
+ STAC_927X_VOLKNOB,
STAC_927X_MODELS
};
@@ -907,6 +908,16 @@
{}
};
+static struct hda_verb dell_3st_core_init[] = {
+ /* don't set delta bit */
+ {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+ /* unmute node 0x1b */
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* select node 0x03 as DAC */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {}
+};
+
static struct hda_verb stac927x_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
@@ -915,6 +926,14 @@
{}
};
+static struct hda_verb stac927x_volknob_core_init[] = {
+ /* don't set delta bit */
+ {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+ /* enable analog pc beep path */
+ {0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5},
+ {}
+};
+
static struct hda_verb stac9205_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
@@ -1999,6 +2018,7 @@
[STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs,
[STAC_DELL_3ST] = dell_3st_pin_configs,
[STAC_DELL_BIOS] = NULL,
+ [STAC_927X_VOLKNOB] = NULL,
};
static const char *stac927x_models[STAC_927X_MODELS] = {
@@ -2010,6 +2030,7 @@
[STAC_D965_5ST_NO_FP] = "5stack-no-fp",
[STAC_DELL_3ST] = "dell-3stack",
[STAC_DELL_BIOS] = "dell-bios",
+ [STAC_927X_VOLKNOB] = "volknob",
};
static struct snd_pci_quirk stac927x_cfg_tbl[] = {
@@ -2045,6 +2066,8 @@
"Intel D965", STAC_D965_5ST),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
"Intel D965", STAC_D965_5ST),
+ /* volume-knob fixes */
+ SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
{} /* terminator */
};
@@ -5612,10 +5635,14 @@
spec->dmic_nids = stac927x_dmic_nids;
spec->num_dmics = STAC927X_NUM_DMICS;
- spec->init = d965_core_init;
+ spec->init = dell_3st_core_init;
spec->dmux_nids = stac927x_dmux_nids;
spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
break;
+ case STAC_927X_VOLKNOB:
+ spec->num_dmics = 0;
+ spec->init = stac927x_volknob_core_init;
+ break;
default:
spec->num_dmics = 0;
spec->init = stac927x_core_init;
diff --git a/sound/pci/ice1712/amp.c b/sound/pci/ice1712/amp.c
index 3756430..6da21a2 100644
--- a/sound/pci/ice1712/amp.c
+++ b/sound/pci/ice1712/amp.c
@@ -52,11 +52,13 @@
/* only use basic functionality for now */
- ice->num_total_dacs = 2; /* only PSDOUT0 is connected */
+ /* VT1616 6ch codec connected to PSDOUT0 using packed mode */
+ ice->num_total_dacs = 6;
ice->num_total_adcs = 2;
- /* Chaintech AV-710 has another codecs, which need initialization */
- /* initialize WM8728 codec */
+ /* Chaintech AV-710 has another WM8728 codec connected to PSDOUT4
+ (shared with the SPDIF output). Mixer control for this codec
+ is not yet supported. */
if (ice->eeprom.subvendor == VT1724_SUBDEVICE_AV710) {
for (i = 0; i < ARRAY_SIZE(wm_inits); i += 2)
wm_put(ice, wm_inits[i], wm_inits[i+1]);
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 76b717d..10fc92c 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -648,7 +648,7 @@
(inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
/* running? we cannot change the rate now... */
spin_unlock_irqrestore(&ice->reg_lock, flags);
- return -EBUSY;
+ return ((rate == ice->cur_rate) && !force) ? 0 : -EBUSY;
}
if (!force && is_pro_rate_locked(ice)) {
spin_unlock_irqrestore(&ice->reg_lock, flags);