| |
| /* |
| * Linux device driver for ADMtek ADM8211 (IEEE 802.11b MAC/BBP) |
| * |
| * Copyright (c) 2003, Jouni Malinen <j@w1.fi> |
| * Copyright (c) 2004-2007, Michael Wu <flamingice@sourmilk.net> |
| * Some parts copyright (c) 2003 by David Young <dyoung@pobox.com> |
| * and used with permission. |
| * |
| * Much thanks to Infineon-ADMtek for their support of this driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. See README and COPYING for |
| * more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/if.h> |
| #include <linux/skbuff.h> |
| #include <linux/etherdevice.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/crc32.h> |
| #include <linux/eeprom_93cx6.h> |
| #include <net/mac80211.h> |
| |
| #include "adm8211.h" |
| |
| MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); |
| MODULE_AUTHOR("Jouni Malinen <j@w1.fi>"); |
| MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211"); |
| MODULE_SUPPORTED_DEVICE("ADM8211"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int tx_ring_size __read_mostly = 16; |
| static unsigned int rx_ring_size __read_mostly = 16; |
| |
| module_param(tx_ring_size, uint, 0); |
| module_param(rx_ring_size, uint, 0); |
| |
| static DEFINE_PCI_DEVICE_TABLE(adm8211_pci_id_table) = { |
| /* ADMtek ADM8211 */ |
| { PCI_DEVICE(0x10B7, 0x6000) }, /* 3Com 3CRSHPW796 */ |
| { PCI_DEVICE(0x1200, 0x8201) }, /* ? */ |
| { PCI_DEVICE(0x1317, 0x8201) }, /* ADM8211A */ |
| { PCI_DEVICE(0x1317, 0x8211) }, /* ADM8211B/C */ |
| { 0 } |
| }; |
| |
| static struct ieee80211_rate adm8211_rates[] = { |
| { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
| { .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */ |
| }; |
| |
| static const struct ieee80211_channel adm8211_channels[] = { |
| { .center_freq = 2412}, |
| { .center_freq = 2417}, |
| { .center_freq = 2422}, |
| { .center_freq = 2427}, |
| { .center_freq = 2432}, |
| { .center_freq = 2437}, |
| { .center_freq = 2442}, |
| { .center_freq = 2447}, |
| { .center_freq = 2452}, |
| { .center_freq = 2457}, |
| { .center_freq = 2462}, |
| { .center_freq = 2467}, |
| { .center_freq = 2472}, |
| { .center_freq = 2484}, |
| }; |
| |
| |
| static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom) |
| { |
| struct adm8211_priv *priv = eeprom->data; |
| u32 reg = ADM8211_CSR_READ(SPR); |
| |
| eeprom->reg_data_in = reg & ADM8211_SPR_SDI; |
| eeprom->reg_data_out = reg & ADM8211_SPR_SDO; |
| eeprom->reg_data_clock = reg & ADM8211_SPR_SCLK; |
| eeprom->reg_chip_select = reg & ADM8211_SPR_SCS; |
| } |
| |
| static void adm8211_eeprom_register_write(struct eeprom_93cx6 *eeprom) |
| { |
| struct adm8211_priv *priv = eeprom->data; |
| u32 reg = 0x4000 | ADM8211_SPR_SRS; |
| |
| if (eeprom->reg_data_in) |
| reg |= ADM8211_SPR_SDI; |
| if (eeprom->reg_data_out) |
| reg |= ADM8211_SPR_SDO; |
| if (eeprom->reg_data_clock) |
| reg |= ADM8211_SPR_SCLK; |
| if (eeprom->reg_chip_select) |
| reg |= ADM8211_SPR_SCS; |
| |
| ADM8211_CSR_WRITE(SPR, reg); |
| ADM8211_CSR_READ(SPR); /* eeprom_delay */ |
| } |
| |
| static int adm8211_read_eeprom(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| unsigned int words, i; |
| struct ieee80211_chan_range chan_range; |
| u16 cr49; |
| struct eeprom_93cx6 eeprom = { |
| .data = priv, |
| .register_read = adm8211_eeprom_register_read, |
| .register_write = adm8211_eeprom_register_write |
| }; |
| |
| if (ADM8211_CSR_READ(CSR_TEST0) & ADM8211_CSR_TEST0_EPTYP) { |
| /* 256 * 16-bit = 512 bytes */ |
| eeprom.width = PCI_EEPROM_WIDTH_93C66; |
| words = 256; |
| } else { |
| /* 64 * 16-bit = 128 bytes */ |
| eeprom.width = PCI_EEPROM_WIDTH_93C46; |
| words = 64; |
| } |
| |
| priv->eeprom_len = words * 2; |
| priv->eeprom = kmalloc(priv->eeprom_len, GFP_KERNEL); |
| if (!priv->eeprom) |
| return -ENOMEM; |
| |
| eeprom_93cx6_multiread(&eeprom, 0, (__le16 *)priv->eeprom, words); |
| |
| cr49 = le16_to_cpu(priv->eeprom->cr49); |
| priv->rf_type = (cr49 >> 3) & 0x7; |
| switch (priv->rf_type) { |
| case ADM8211_TYPE_INTERSIL: |
| case ADM8211_TYPE_RFMD: |
| case ADM8211_TYPE_MARVEL: |
| case ADM8211_TYPE_AIROHA: |
| case ADM8211_TYPE_ADMTEK: |
| break; |
| |
| default: |
| if (priv->pdev->revision < ADM8211_REV_CA) |
| priv->rf_type = ADM8211_TYPE_RFMD; |
| else |
| priv->rf_type = ADM8211_TYPE_AIROHA; |
| |
| printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n", |
| pci_name(priv->pdev), (cr49 >> 3) & 0x7); |
| } |
| |
| priv->bbp_type = cr49 & 0x7; |
| switch (priv->bbp_type) { |
| case ADM8211_TYPE_INTERSIL: |
| case ADM8211_TYPE_RFMD: |
| case ADM8211_TYPE_MARVEL: |
| case ADM8211_TYPE_AIROHA: |
| case ADM8211_TYPE_ADMTEK: |
| break; |
| default: |
| if (priv->pdev->revision < ADM8211_REV_CA) |
| priv->bbp_type = ADM8211_TYPE_RFMD; |
| else |
| priv->bbp_type = ADM8211_TYPE_ADMTEK; |
| |
| printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n", |
| pci_name(priv->pdev), cr49 >> 3); |
| } |
| |
| if (priv->eeprom->country_code >= ARRAY_SIZE(cranges)) { |
| printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n", |
| pci_name(priv->pdev), priv->eeprom->country_code); |
| |
| chan_range = cranges[2]; |
| } else |
| chan_range = cranges[priv->eeprom->country_code]; |
| |
| printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n", |
| pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max); |
| |
| BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels)); |
| |
| memcpy(priv->channels, adm8211_channels, sizeof(priv->channels)); |
| priv->band.channels = priv->channels; |
| priv->band.n_channels = ARRAY_SIZE(adm8211_channels); |
| priv->band.bitrates = adm8211_rates; |
| priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates); |
| |
| for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++) |
| if (i < chan_range.min || i > chan_range.max) |
| priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED; |
| |
| switch (priv->eeprom->specific_bbptype) { |
| case ADM8211_BBP_RFMD3000: |
| case ADM8211_BBP_RFMD3002: |
| case ADM8211_BBP_ADM8011: |
| priv->specific_bbptype = priv->eeprom->specific_bbptype; |
| break; |
| |
| default: |
| if (priv->pdev->revision < ADM8211_REV_CA) |
| priv->specific_bbptype = ADM8211_BBP_RFMD3000; |
| else |
| priv->specific_bbptype = ADM8211_BBP_ADM8011; |
| |
| printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n", |
| pci_name(priv->pdev), priv->eeprom->specific_bbptype); |
| } |
| |
| switch (priv->eeprom->specific_rftype) { |
| case ADM8211_RFMD2948: |
| case ADM8211_RFMD2958: |
| case ADM8211_RFMD2958_RF3000_CONTROL_POWER: |
| case ADM8211_MAX2820: |
| case ADM8211_AL2210L: |
| priv->transceiver_type = priv->eeprom->specific_rftype; |
| break; |
| |
| default: |
| if (priv->pdev->revision == ADM8211_REV_BA) |
| priv->transceiver_type = ADM8211_RFMD2958_RF3000_CONTROL_POWER; |
| else if (priv->pdev->revision == ADM8211_REV_CA) |
| priv->transceiver_type = ADM8211_AL2210L; |
| else if (priv->pdev->revision == ADM8211_REV_AB) |
| priv->transceiver_type = ADM8211_RFMD2948; |
| |
| printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n", |
| pci_name(priv->pdev), priv->eeprom->specific_rftype); |
| |
| break; |
| } |
| |
| printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d " |
| "Transceiver=%d\n", pci_name(priv->pdev), priv->rf_type, |
| priv->bbp_type, priv->specific_bbptype, priv->transceiver_type); |
| |
| return 0; |
| } |
| |
| static inline void adm8211_write_sram(struct ieee80211_hw *dev, |
| u32 addr, u32 data) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| |
| ADM8211_CSR_WRITE(WEPCTL, addr | ADM8211_WEPCTL_TABLE_WR | |
| (priv->pdev->revision < ADM8211_REV_BA ? |
| 0 : ADM8211_WEPCTL_SEL_WEPTABLE )); |
| ADM8211_CSR_READ(WEPCTL); |
| msleep(1); |
| |
| ADM8211_CSR_WRITE(WESK, data); |
| ADM8211_CSR_READ(WESK); |
| msleep(1); |
| } |
| |
| static void adm8211_write_sram_bytes(struct ieee80211_hw *dev, |
| unsigned int addr, u8 *buf, |
| unsigned int len) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg = ADM8211_CSR_READ(WEPCTL); |
| unsigned int i; |
| |
| if (priv->pdev->revision < ADM8211_REV_BA) { |
| for (i = 0; i < len; i += 2) { |
| u16 val = buf[i] | (buf[i + 1] << 8); |
| adm8211_write_sram(dev, addr + i / 2, val); |
| } |
| } else { |
| for (i = 0; i < len; i += 4) { |
| u32 val = (buf[i + 0] << 0 ) | (buf[i + 1] << 8 ) | |
| (buf[i + 2] << 16) | (buf[i + 3] << 24); |
| adm8211_write_sram(dev, addr + i / 4, val); |
| } |
| } |
| |
| ADM8211_CSR_WRITE(WEPCTL, reg); |
| } |
| |
| static void adm8211_clear_sram(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg = ADM8211_CSR_READ(WEPCTL); |
| unsigned int addr; |
| |
| for (addr = 0; addr < ADM8211_SRAM_SIZE; addr++) |
| adm8211_write_sram(dev, addr, 0); |
| |
| ADM8211_CSR_WRITE(WEPCTL, reg); |
| } |
| |
| static int adm8211_get_stats(struct ieee80211_hw *dev, |
| struct ieee80211_low_level_stats *stats) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| |
| memcpy(stats, &priv->stats, sizeof(*stats)); |
| |
| return 0; |
| } |
| |
| static void adm8211_interrupt_tci(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| unsigned int dirty_tx; |
| |
| spin_lock(&priv->lock); |
| |
| for (dirty_tx = priv->dirty_tx; priv->cur_tx - dirty_tx; dirty_tx++) { |
| unsigned int entry = dirty_tx % priv->tx_ring_size; |
| u32 status = le32_to_cpu(priv->tx_ring[entry].status); |
| struct ieee80211_tx_info *txi; |
| struct adm8211_tx_ring_info *info; |
| struct sk_buff *skb; |
| |
| if (status & TDES0_CONTROL_OWN || |
| !(status & TDES0_CONTROL_DONE)) |
| break; |
| |
| info = &priv->tx_buffers[entry]; |
| skb = info->skb; |
| txi = IEEE80211_SKB_CB(skb); |
| |
| /* TODO: check TDES0_STATUS_TUF and TDES0_STATUS_TRO */ |
| |
| pci_unmap_single(priv->pdev, info->mapping, |
| info->skb->len, PCI_DMA_TODEVICE); |
| |
| ieee80211_tx_info_clear_status(txi); |
| |
| skb_pull(skb, sizeof(struct adm8211_tx_hdr)); |
| memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen); |
| if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && |
| !(status & TDES0_STATUS_ES)) |
| txi->flags |= IEEE80211_TX_STAT_ACK; |
| |
| ieee80211_tx_status_irqsafe(dev, skb); |
| |
| info->skb = NULL; |
| } |
| |
| if (priv->cur_tx - dirty_tx < priv->tx_ring_size - 2) |
| ieee80211_wake_queue(dev, 0); |
| |
| priv->dirty_tx = dirty_tx; |
| spin_unlock(&priv->lock); |
| } |
| |
| |
| static void adm8211_interrupt_rci(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| unsigned int entry = priv->cur_rx % priv->rx_ring_size; |
| u32 status; |
| unsigned int pktlen; |
| struct sk_buff *skb, *newskb; |
| unsigned int limit = priv->rx_ring_size; |
| u8 rssi, rate; |
| |
| while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) { |
| if (!limit--) |
| break; |
| |
| status = le32_to_cpu(priv->rx_ring[entry].status); |
| rate = (status & RDES0_STATUS_RXDR) >> 12; |
| rssi = le32_to_cpu(priv->rx_ring[entry].length) & |
| RDES1_STATUS_RSSI; |
| |
| pktlen = status & RDES0_STATUS_FL; |
| if (pktlen > RX_PKT_SIZE) { |
| if (net_ratelimit()) |
| printk(KERN_DEBUG "%s: frame too long (%d)\n", |
| wiphy_name(dev->wiphy), pktlen); |
| pktlen = RX_PKT_SIZE; |
| } |
| |
| if (!priv->soft_rx_crc && status & RDES0_STATUS_ES) { |
| skb = NULL; /* old buffer will be reused */ |
| /* TODO: update RX error stats */ |
| /* TODO: check RDES0_STATUS_CRC*E */ |
| } else if (pktlen < RX_COPY_BREAK) { |
| skb = dev_alloc_skb(pktlen); |
| if (skb) { |
| pci_dma_sync_single_for_cpu( |
| priv->pdev, |
| priv->rx_buffers[entry].mapping, |
| pktlen, PCI_DMA_FROMDEVICE); |
| memcpy(skb_put(skb, pktlen), |
| skb_tail_pointer(priv->rx_buffers[entry].skb), |
| pktlen); |
| pci_dma_sync_single_for_device( |
| priv->pdev, |
| priv->rx_buffers[entry].mapping, |
| RX_PKT_SIZE, PCI_DMA_FROMDEVICE); |
| } |
| } else { |
| newskb = dev_alloc_skb(RX_PKT_SIZE); |
| if (newskb) { |
| skb = priv->rx_buffers[entry].skb; |
| skb_put(skb, pktlen); |
| pci_unmap_single( |
| priv->pdev, |
| priv->rx_buffers[entry].mapping, |
| RX_PKT_SIZE, PCI_DMA_FROMDEVICE); |
| priv->rx_buffers[entry].skb = newskb; |
| priv->rx_buffers[entry].mapping = |
| pci_map_single(priv->pdev, |
| skb_tail_pointer(newskb), |
| RX_PKT_SIZE, |
| PCI_DMA_FROMDEVICE); |
| } else { |
| skb = NULL; |
| /* TODO: update rx dropped stats */ |
| } |
| |
| priv->rx_ring[entry].buffer1 = |
| cpu_to_le32(priv->rx_buffers[entry].mapping); |
| } |
| |
| priv->rx_ring[entry].status = cpu_to_le32(RDES0_STATUS_OWN | |
| RDES0_STATUS_SQL); |
| priv->rx_ring[entry].length = |
| cpu_to_le32(RX_PKT_SIZE | |
| (entry == priv->rx_ring_size - 1 ? |
| RDES1_CONTROL_RER : 0)); |
| |
| if (skb) { |
| struct ieee80211_rx_status rx_status = {0}; |
| |
| if (priv->pdev->revision < ADM8211_REV_CA) |
| rx_status.signal = rssi; |
| else |
| rx_status.signal = 100 - rssi; |
| |
| rx_status.rate_idx = rate; |
| |
| rx_status.freq = adm8211_channels[priv->channel - 1].center_freq; |
| rx_status.band = IEEE80211_BAND_2GHZ; |
| |
| memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); |
| ieee80211_rx_irqsafe(dev, skb); |
| } |
| |
| entry = (++priv->cur_rx) % priv->rx_ring_size; |
| } |
| |
| /* TODO: check LPC and update stats? */ |
| } |
| |
| |
| static irqreturn_t adm8211_interrupt(int irq, void *dev_id) |
| { |
| #define ADM8211_INT(x) \ |
| do { \ |
| if (unlikely(stsr & ADM8211_STSR_ ## x)) \ |
| printk(KERN_DEBUG "%s: " #x "\n", wiphy_name(dev->wiphy)); \ |
| } while (0) |
| |
| struct ieee80211_hw *dev = dev_id; |
| struct adm8211_priv *priv = dev->priv; |
| u32 stsr = ADM8211_CSR_READ(STSR); |
| ADM8211_CSR_WRITE(STSR, stsr); |
| if (stsr == 0xffffffff) |
| return IRQ_HANDLED; |
| |
| if (!(stsr & (ADM8211_STSR_NISS | ADM8211_STSR_AISS))) |
| return IRQ_HANDLED; |
| |
| if (stsr & ADM8211_STSR_RCI) |
| adm8211_interrupt_rci(dev); |
| if (stsr & ADM8211_STSR_TCI) |
| adm8211_interrupt_tci(dev); |
| |
| ADM8211_INT(PCF); |
| ADM8211_INT(BCNTC); |
| ADM8211_INT(GPINT); |
| ADM8211_INT(ATIMTC); |
| ADM8211_INT(TSFTF); |
| ADM8211_INT(TSCZ); |
| ADM8211_INT(SQL); |
| ADM8211_INT(WEPTD); |
| ADM8211_INT(ATIME); |
| ADM8211_INT(TEIS); |
| ADM8211_INT(FBE); |
| ADM8211_INT(REIS); |
| ADM8211_INT(GPTT); |
| ADM8211_INT(RPS); |
| ADM8211_INT(RDU); |
| ADM8211_INT(TUF); |
| ADM8211_INT(TPS); |
| |
| return IRQ_HANDLED; |
| |
| #undef ADM8211_INT |
| } |
| |
| #define WRITE_SYN(name,v_mask,v_shift,a_mask,a_shift,bits,prewrite,postwrite)\ |
| static void adm8211_rf_write_syn_ ## name (struct ieee80211_hw *dev, \ |
| u16 addr, u32 value) { \ |
| struct adm8211_priv *priv = dev->priv; \ |
| unsigned int i; \ |
| u32 reg, bitbuf; \ |
| \ |
| value &= v_mask; \ |
| addr &= a_mask; \ |
| bitbuf = (value << v_shift) | (addr << a_shift); \ |
| \ |
| ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_1); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_IF_SELECT_0); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| \ |
| if (prewrite) { \ |
| ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_WRITE_SYNDATA_0); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| } \ |
| \ |
| for (i = 0; i <= bits; i++) { \ |
| if (bitbuf & (1 << (bits - i))) \ |
| reg = ADM8211_SYNRF_WRITE_SYNDATA_1; \ |
| else \ |
| reg = ADM8211_SYNRF_WRITE_SYNDATA_0; \ |
| \ |
| ADM8211_CSR_WRITE(SYNRF, reg); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| \ |
| ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_1); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_WRITE_CLOCK_0); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| } \ |
| \ |
| if (postwrite == 1) { \ |
| ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_0); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| } \ |
| if (postwrite == 2) { \ |
| ADM8211_CSR_WRITE(SYNRF, reg | ADM8211_SYNRF_IF_SELECT_1); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| } \ |
| \ |
| ADM8211_CSR_WRITE(SYNRF, 0); \ |
| ADM8211_CSR_READ(SYNRF); \ |
| } |
| |
| WRITE_SYN(max2820, 0x00FFF, 0, 0x0F, 12, 15, 1, 1) |
| WRITE_SYN(al2210l, 0xFFFFF, 4, 0x0F, 0, 23, 1, 1) |
| WRITE_SYN(rfmd2958, 0x3FFFF, 0, 0x1F, 18, 23, 0, 1) |
| WRITE_SYN(rfmd2948, 0x0FFFF, 4, 0x0F, 0, 21, 0, 2) |
| |
| #undef WRITE_SYN |
| |
| static int adm8211_write_bbp(struct ieee80211_hw *dev, u8 addr, u8 data) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| unsigned int timeout; |
| u32 reg; |
| |
| timeout = 10; |
| while (timeout > 0) { |
| reg = ADM8211_CSR_READ(BBPCTL); |
| if (!(reg & (ADM8211_BBPCTL_WR | ADM8211_BBPCTL_RD))) |
| break; |
| timeout--; |
| msleep(2); |
| } |
| |
| if (timeout == 0) { |
| printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed" |
| " prewrite (reg=0x%08x)\n", |
| wiphy_name(dev->wiphy), addr, data, reg); |
| return -ETIMEDOUT; |
| } |
| |
| switch (priv->bbp_type) { |
| case ADM8211_TYPE_INTERSIL: |
| reg = ADM8211_BBPCTL_MMISEL; /* three wire interface */ |
| break; |
| case ADM8211_TYPE_RFMD: |
| reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP | |
| (0x01 << 18); |
| break; |
| case ADM8211_TYPE_ADMTEK: |
| reg = (0x20 << 24) | ADM8211_BBPCTL_TXCE | ADM8211_BBPCTL_CCAP | |
| (0x05 << 18); |
| break; |
| } |
| reg |= ADM8211_BBPCTL_WR | (addr << 8) | data; |
| |
| ADM8211_CSR_WRITE(BBPCTL, reg); |
| |
| timeout = 10; |
| while (timeout > 0) { |
| reg = ADM8211_CSR_READ(BBPCTL); |
| if (!(reg & ADM8211_BBPCTL_WR)) |
| break; |
| timeout--; |
| msleep(2); |
| } |
| |
| if (timeout == 0) { |
| ADM8211_CSR_WRITE(BBPCTL, ADM8211_CSR_READ(BBPCTL) & |
| ~ADM8211_BBPCTL_WR); |
| printk(KERN_DEBUG "%s: adm8211_write_bbp(%d,%d) failed" |
| " postwrite (reg=0x%08x)\n", |
| wiphy_name(dev->wiphy), addr, data, reg); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan) |
| { |
| static const u32 adm8211_rfmd2958_reg5[] = |
| {0x22BD, 0x22D2, 0x22E8, 0x22FE, 0x2314, 0x232A, 0x2340, |
| 0x2355, 0x236B, 0x2381, 0x2397, 0x23AD, 0x23C2, 0x23F7}; |
| static const u32 adm8211_rfmd2958_reg6[] = |
| {0x05D17, 0x3A2E8, 0x2E8BA, 0x22E8B, 0x1745D, 0x0BA2E, 0x00000, |
| 0x345D1, 0x28BA2, 0x1D174, 0x11745, 0x05D17, 0x3A2E8, 0x11745}; |
| |
| struct adm8211_priv *priv = dev->priv; |
| u8 ant_power = priv->ant_power > 0x3F ? |
| priv->eeprom->antenna_power[chan - 1] : priv->ant_power; |
| u8 tx_power = priv->tx_power > 0x3F ? |
| priv->eeprom->tx_power[chan - 1] : priv->tx_power; |
| u8 lpf_cutoff = priv->lpf_cutoff == 0xFF ? |
| priv->eeprom->lpf_cutoff[chan - 1] : priv->lpf_cutoff; |
| u8 lnags_thresh = priv->lnags_threshold == 0xFF ? |
| priv->eeprom->lnags_threshold[chan - 1] : priv->lnags_threshold; |
| u32 reg; |
| |
| ADM8211_IDLE(); |
| |
| /* Program synthesizer to new channel */ |
| switch (priv->transceiver_type) { |
| case ADM8211_RFMD2958: |
| case ADM8211_RFMD2958_RF3000_CONTROL_POWER: |
| adm8211_rf_write_syn_rfmd2958(dev, 0x00, 0x04007); |
| adm8211_rf_write_syn_rfmd2958(dev, 0x02, 0x00033); |
| |
| adm8211_rf_write_syn_rfmd2958(dev, 0x05, |
| adm8211_rfmd2958_reg5[chan - 1]); |
| adm8211_rf_write_syn_rfmd2958(dev, 0x06, |
| adm8211_rfmd2958_reg6[chan - 1]); |
| break; |
| |
| case ADM8211_RFMD2948: |
| adm8211_rf_write_syn_rfmd2948(dev, SI4126_MAIN_CONF, |
| SI4126_MAIN_XINDIV2); |
| adm8211_rf_write_syn_rfmd2948(dev, SI4126_POWERDOWN, |
| SI4126_POWERDOWN_PDIB | |
| SI4126_POWERDOWN_PDRB); |
| adm8211_rf_write_syn_rfmd2948(dev, SI4126_PHASE_DET_GAIN, 0); |
| adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_N_DIV, |
| (chan == 14 ? |
| 2110 : (2033 + (chan * 5)))); |
| adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_N_DIV, 1496); |
| adm8211_rf_write_syn_rfmd2948(dev, SI4126_RF2_R_DIV, 44); |
| adm8211_rf_write_syn_rfmd2948(dev, SI4126_IF_R_DIV, 44); |
| break; |
| |
| case ADM8211_MAX2820: |
| adm8211_rf_write_syn_max2820(dev, 0x3, |
| (chan == 14 ? 0x054 : (0x7 + (chan * 5)))); |
| break; |
| |
| case ADM8211_AL2210L: |
| adm8211_rf_write_syn_al2210l(dev, 0x0, |
| (chan == 14 ? 0x229B4 : (0x22967 + (chan * 5)))); |
| break; |
| |
| default: |
| printk(KERN_DEBUG "%s: unsupported transceiver type %d\n", |
| wiphy_name(dev->wiphy), priv->transceiver_type); |
| break; |
| } |
| |
| /* write BBP regs */ |
| if (priv->bbp_type == ADM8211_TYPE_RFMD) { |
| |
| /* SMC 2635W specific? adm8211b doesn't use the 2948 though.. */ |
| /* TODO: remove if SMC 2635W doesn't need this */ |
| if (priv->transceiver_type == ADM8211_RFMD2948) { |
| reg = ADM8211_CSR_READ(GPIO); |
| reg &= 0xfffc0000; |
| reg |= ADM8211_CSR_GPIO_EN0; |
| if (chan != 14) |
| reg |= ADM8211_CSR_GPIO_O0; |
| ADM8211_CSR_WRITE(GPIO, reg); |
| } |
| |
| if (priv->transceiver_type == ADM8211_RFMD2958) { |
| /* set PCNT2 */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x0B, 0x07100); |
| /* set PCNT1 P_DESIRED/MID_BIAS */ |
| reg = le16_to_cpu(priv->eeprom->cr49); |
| reg >>= 13; |
| reg <<= 15; |
| reg |= ant_power << 9; |
| adm8211_rf_write_syn_rfmd2958(dev, 0x0A, reg); |
| /* set TXRX TX_GAIN */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x09, 0x00050 | |
| (priv->pdev->revision < ADM8211_REV_CA ? tx_power : 0)); |
| } else { |
| reg = ADM8211_CSR_READ(PLCPHD); |
| reg &= 0xff00ffff; |
| reg |= tx_power << 18; |
| ADM8211_CSR_WRITE(PLCPHD, reg); |
| } |
| |
| ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF | |
| ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST); |
| ADM8211_CSR_READ(SYNRF); |
| msleep(30); |
| |
| /* RF3000 BBP */ |
| if (priv->transceiver_type != ADM8211_RFMD2958) |
| adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, |
| tx_power<<2); |
| adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, lpf_cutoff); |
| adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, lnags_thresh); |
| adm8211_write_bbp(dev, 0x1c, priv->pdev->revision == ADM8211_REV_BA ? |
| priv->eeprom->cr28 : 0); |
| adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29); |
| |
| ADM8211_CSR_WRITE(SYNRF, 0); |
| |
| /* Nothing to do for ADMtek BBP */ |
| } else if (priv->bbp_type != ADM8211_TYPE_ADMTEK) |
| printk(KERN_DEBUG "%s: unsupported BBP type %d\n", |
| wiphy_name(dev->wiphy), priv->bbp_type); |
| |
| ADM8211_RESTORE(); |
| |
| /* update current channel for adhoc (and maybe AP mode) */ |
| reg = ADM8211_CSR_READ(CAP0); |
| reg &= ~0xF; |
| reg |= chan; |
| ADM8211_CSR_WRITE(CAP0, reg); |
| |
| return 0; |
| } |
| |
| static void adm8211_update_mode(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| |
| ADM8211_IDLE(); |
| |
| priv->soft_rx_crc = 0; |
| switch (priv->mode) { |
| case NL80211_IFTYPE_STATION: |
| priv->nar &= ~(ADM8211_NAR_PR | ADM8211_NAR_EA); |
| priv->nar |= ADM8211_NAR_ST | ADM8211_NAR_SR; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| priv->nar &= ~ADM8211_NAR_PR; |
| priv->nar |= ADM8211_NAR_EA | ADM8211_NAR_ST | ADM8211_NAR_SR; |
| |
| /* don't trust the error bits on rev 0x20 and up in adhoc */ |
| if (priv->pdev->revision >= ADM8211_REV_BA) |
| priv->soft_rx_crc = 1; |
| break; |
| case NL80211_IFTYPE_MONITOR: |
| priv->nar &= ~(ADM8211_NAR_EA | ADM8211_NAR_ST); |
| priv->nar |= ADM8211_NAR_PR | ADM8211_NAR_SR; |
| break; |
| } |
| |
| ADM8211_RESTORE(); |
| } |
| |
| static void adm8211_hw_init_syn(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| |
| switch (priv->transceiver_type) { |
| case ADM8211_RFMD2958: |
| case ADM8211_RFMD2958_RF3000_CONTROL_POWER: |
| /* comments taken from ADMtek vendor driver */ |
| |
| /* Reset RF2958 after power on */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x1F, 0x00000); |
| /* Initialize RF VCO Core Bias to maximum */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x0C, 0x3001F); |
| /* Initialize IF PLL */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x01, 0x29C03); |
| /* Initialize IF PLL Coarse Tuning */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x03, 0x1FF6F); |
| /* Initialize RF PLL */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x04, 0x29403); |
| /* Initialize RF PLL Coarse Tuning */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x07, 0x1456F); |
| /* Initialize TX gain and filter BW (R9) */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x09, |
| (priv->transceiver_type == ADM8211_RFMD2958 ? |
| 0x10050 : 0x00050)); |
| /* Initialize CAL register */ |
| adm8211_rf_write_syn_rfmd2958(dev, 0x08, 0x3FFF8); |
| break; |
| |
| case ADM8211_MAX2820: |
| adm8211_rf_write_syn_max2820(dev, 0x1, 0x01E); |
| adm8211_rf_write_syn_max2820(dev, 0x2, 0x001); |
| adm8211_rf_write_syn_max2820(dev, 0x3, 0x054); |
| adm8211_rf_write_syn_max2820(dev, 0x4, 0x310); |
| adm8211_rf_write_syn_max2820(dev, 0x5, 0x000); |
| break; |
| |
| case ADM8211_AL2210L: |
| adm8211_rf_write_syn_al2210l(dev, 0x0, 0x0196C); |
| adm8211_rf_write_syn_al2210l(dev, 0x1, 0x007CB); |
| adm8211_rf_write_syn_al2210l(dev, 0x2, 0x3582F); |
| adm8211_rf_write_syn_al2210l(dev, 0x3, 0x010A9); |
| adm8211_rf_write_syn_al2210l(dev, 0x4, 0x77280); |
| adm8211_rf_write_syn_al2210l(dev, 0x5, 0x45641); |
| adm8211_rf_write_syn_al2210l(dev, 0x6, 0xEA130); |
| adm8211_rf_write_syn_al2210l(dev, 0x7, 0x80000); |
| adm8211_rf_write_syn_al2210l(dev, 0x8, 0x7850F); |
| adm8211_rf_write_syn_al2210l(dev, 0x9, 0xF900C); |
| adm8211_rf_write_syn_al2210l(dev, 0xA, 0x00000); |
| adm8211_rf_write_syn_al2210l(dev, 0xB, 0x00000); |
| break; |
| |
| case ADM8211_RFMD2948: |
| default: |
| break; |
| } |
| } |
| |
| static int adm8211_hw_init_bbp(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg; |
| |
| /* write addresses */ |
| if (priv->bbp_type == ADM8211_TYPE_INTERSIL) { |
| ADM8211_CSR_WRITE(MMIWA, 0x100E0C0A); |
| ADM8211_CSR_WRITE(MMIRD0, 0x00007C7E); |
| ADM8211_CSR_WRITE(MMIRD1, 0x00100000); |
| } else if (priv->bbp_type == ADM8211_TYPE_RFMD || |
| priv->bbp_type == ADM8211_TYPE_ADMTEK) { |
| /* check specific BBP type */ |
| switch (priv->specific_bbptype) { |
| case ADM8211_BBP_RFMD3000: |
| case ADM8211_BBP_RFMD3002: |
| ADM8211_CSR_WRITE(MMIWA, 0x00009101); |
| ADM8211_CSR_WRITE(MMIRD0, 0x00000301); |
| break; |
| |
| case ADM8211_BBP_ADM8011: |
| ADM8211_CSR_WRITE(MMIWA, 0x00008903); |
| ADM8211_CSR_WRITE(MMIRD0, 0x00001716); |
| |
| reg = ADM8211_CSR_READ(BBPCTL); |
| reg &= ~ADM8211_BBPCTL_TYPE; |
| reg |= 0x5 << 18; |
| ADM8211_CSR_WRITE(BBPCTL, reg); |
| break; |
| } |
| |
| switch (priv->pdev->revision) { |
| case ADM8211_REV_CA: |
| if (priv->transceiver_type == ADM8211_RFMD2958 || |
| priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER || |
| priv->transceiver_type == ADM8211_RFMD2948) |
| ADM8211_CSR_WRITE(SYNCTL, 0x1 << 22); |
| else if (priv->transceiver_type == ADM8211_MAX2820 || |
| priv->transceiver_type == ADM8211_AL2210L) |
| ADM8211_CSR_WRITE(SYNCTL, 0x3 << 22); |
| break; |
| |
| case ADM8211_REV_BA: |
| reg = ADM8211_CSR_READ(MMIRD1); |
| reg &= 0x0000FFFF; |
| reg |= 0x7e100000; |
| ADM8211_CSR_WRITE(MMIRD1, reg); |
| break; |
| |
| case ADM8211_REV_AB: |
| case ADM8211_REV_AF: |
| default: |
| ADM8211_CSR_WRITE(MMIRD1, 0x7e100000); |
| break; |
| } |
| |
| /* For RFMD */ |
| ADM8211_CSR_WRITE(MACTEST, 0x800); |
| } |
| |
| adm8211_hw_init_syn(dev); |
| |
| /* Set RF Power control IF pin to PE1+PHYRST# */ |
| ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_SELRF | |
| ADM8211_SYNRF_PE1 | ADM8211_SYNRF_PHYRST); |
| ADM8211_CSR_READ(SYNRF); |
| msleep(20); |
| |
| /* write BBP regs */ |
| if (priv->bbp_type == ADM8211_TYPE_RFMD) { |
| /* RF3000 BBP */ |
| /* another set: |
| * 11: c8 |
| * 14: 14 |
| * 15: 50 (chan 1..13; chan 14: d0) |
| * 1c: 00 |
| * 1d: 84 |
| */ |
| adm8211_write_bbp(dev, RF3000_CCA_CTRL, 0x80); |
| /* antenna selection: diversity */ |
| adm8211_write_bbp(dev, RF3000_DIVERSITY__RSSI, 0x80); |
| adm8211_write_bbp(dev, RF3000_TX_VAR_GAIN__TX_LEN_EXT, 0x74); |
| adm8211_write_bbp(dev, RF3000_LOW_GAIN_CALIB, 0x38); |
| adm8211_write_bbp(dev, RF3000_HIGH_GAIN_CALIB, 0x40); |
| |
| if (priv->eeprom->major_version < 2) { |
| adm8211_write_bbp(dev, 0x1c, 0x00); |
| adm8211_write_bbp(dev, 0x1d, 0x80); |
| } else { |
| if (priv->pdev->revision == ADM8211_REV_BA) |
| adm8211_write_bbp(dev, 0x1c, priv->eeprom->cr28); |
| else |
| adm8211_write_bbp(dev, 0x1c, 0x00); |
| |
| adm8211_write_bbp(dev, 0x1d, priv->eeprom->cr29); |
| } |
| } else if (priv->bbp_type == ADM8211_TYPE_ADMTEK) { |
| /* reset baseband */ |
| adm8211_write_bbp(dev, 0x00, 0xFF); |
| /* antenna selection: diversity */ |
| adm8211_write_bbp(dev, 0x07, 0x0A); |
| |
| /* TODO: find documentation for this */ |
| switch (priv->transceiver_type) { |
| case ADM8211_RFMD2958: |
| case ADM8211_RFMD2958_RF3000_CONTROL_POWER: |
| adm8211_write_bbp(dev, 0x00, 0x00); |
| adm8211_write_bbp(dev, 0x01, 0x00); |
| adm8211_write_bbp(dev, 0x02, 0x00); |
| adm8211_write_bbp(dev, 0x03, 0x00); |
| adm8211_write_bbp(dev, 0x06, 0x0f); |
| adm8211_write_bbp(dev, 0x09, 0x00); |
| adm8211_write_bbp(dev, 0x0a, 0x00); |
| adm8211_write_bbp(dev, 0x0b, 0x00); |
| adm8211_write_bbp(dev, 0x0c, 0x00); |
| adm8211_write_bbp(dev, 0x0f, 0xAA); |
| adm8211_write_bbp(dev, 0x10, 0x8c); |
| adm8211_write_bbp(dev, 0x11, 0x43); |
| adm8211_write_bbp(dev, 0x18, 0x40); |
| adm8211_write_bbp(dev, 0x20, 0x23); |
| adm8211_write_bbp(dev, 0x21, 0x02); |
| adm8211_write_bbp(dev, 0x22, 0x28); |
| adm8211_write_bbp(dev, 0x23, 0x30); |
| adm8211_write_bbp(dev, 0x24, 0x2d); |
| adm8211_write_bbp(dev, 0x28, 0x35); |
| adm8211_write_bbp(dev, 0x2a, 0x8c); |
| adm8211_write_bbp(dev, 0x2b, 0x81); |
| adm8211_write_bbp(dev, 0x2c, 0x44); |
| adm8211_write_bbp(dev, 0x2d, 0x0A); |
| adm8211_write_bbp(dev, 0x29, 0x40); |
| adm8211_write_bbp(dev, 0x60, 0x08); |
| adm8211_write_bbp(dev, 0x64, 0x01); |
| break; |
| |
| case ADM8211_MAX2820: |
| adm8211_write_bbp(dev, 0x00, 0x00); |
| adm8211_write_bbp(dev, 0x01, 0x00); |
| adm8211_write_bbp(dev, 0x02, 0x00); |
| adm8211_write_bbp(dev, 0x03, 0x00); |
| adm8211_write_bbp(dev, 0x06, 0x0f); |
| adm8211_write_bbp(dev, 0x09, 0x05); |
| adm8211_write_bbp(dev, 0x0a, 0x02); |
| adm8211_write_bbp(dev, 0x0b, 0x00); |
| adm8211_write_bbp(dev, 0x0c, 0x0f); |
| adm8211_write_bbp(dev, 0x0f, 0x55); |
| adm8211_write_bbp(dev, 0x10, 0x8d); |
| adm8211_write_bbp(dev, 0x11, 0x43); |
| adm8211_write_bbp(dev, 0x18, 0x4a); |
| adm8211_write_bbp(dev, 0x20, 0x20); |
| adm8211_write_bbp(dev, 0x21, 0x02); |
| adm8211_write_bbp(dev, 0x22, 0x23); |
| adm8211_write_bbp(dev, 0x23, 0x30); |
| adm8211_write_bbp(dev, 0x24, 0x2d); |
| adm8211_write_bbp(dev, 0x2a, 0x8c); |
| adm8211_write_bbp(dev, 0x2b, 0x81); |
| adm8211_write_bbp(dev, 0x2c, 0x44); |
| adm8211_write_bbp(dev, 0x29, 0x4a); |
| adm8211_write_bbp(dev, 0x60, 0x2b); |
| adm8211_write_bbp(dev, 0x64, 0x01); |
| break; |
| |
| case ADM8211_AL2210L: |
| adm8211_write_bbp(dev, 0x00, 0x00); |
| adm8211_write_bbp(dev, 0x01, 0x00); |
| adm8211_write_bbp(dev, 0x02, 0x00); |
| adm8211_write_bbp(dev, 0x03, 0x00); |
| adm8211_write_bbp(dev, 0x06, 0x0f); |
| adm8211_write_bbp(dev, 0x07, 0x05); |
| adm8211_write_bbp(dev, 0x08, 0x03); |
| adm8211_write_bbp(dev, 0x09, 0x00); |
| adm8211_write_bbp(dev, 0x0a, 0x00); |
| adm8211_write_bbp(dev, 0x0b, 0x00); |
| adm8211_write_bbp(dev, 0x0c, 0x10); |
| adm8211_write_bbp(dev, 0x0f, 0x55); |
| adm8211_write_bbp(dev, 0x10, 0x8d); |
| adm8211_write_bbp(dev, 0x11, 0x43); |
| adm8211_write_bbp(dev, 0x18, 0x4a); |
| adm8211_write_bbp(dev, 0x20, 0x20); |
| adm8211_write_bbp(dev, 0x21, 0x02); |
| adm8211_write_bbp(dev, 0x22, 0x23); |
| adm8211_write_bbp(dev, 0x23, 0x30); |
| adm8211_write_bbp(dev, 0x24, 0x2d); |
| adm8211_write_bbp(dev, 0x2a, 0xaa); |
| adm8211_write_bbp(dev, 0x2b, 0x81); |
| adm8211_write_bbp(dev, 0x2c, 0x44); |
| adm8211_write_bbp(dev, 0x29, 0xfa); |
| adm8211_write_bbp(dev, 0x60, 0x2d); |
| adm8211_write_bbp(dev, 0x64, 0x01); |
| break; |
| |
| case ADM8211_RFMD2948: |
| break; |
| |
| default: |
| printk(KERN_DEBUG "%s: unsupported transceiver %d\n", |
| wiphy_name(dev->wiphy), priv->transceiver_type); |
| break; |
| } |
| } else |
| printk(KERN_DEBUG "%s: unsupported BBP %d\n", |
| wiphy_name(dev->wiphy), priv->bbp_type); |
| |
| ADM8211_CSR_WRITE(SYNRF, 0); |
| |
| /* Set RF CAL control source to MAC control */ |
| reg = ADM8211_CSR_READ(SYNCTL); |
| reg |= ADM8211_SYNCTL_SELCAL; |
| ADM8211_CSR_WRITE(SYNCTL, reg); |
| |
| return 0; |
| } |
| |
| /* configures hw beacons/probe responses */ |
| static int adm8211_set_rate(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg; |
| int i = 0; |
| u8 rate_buf[12] = {0}; |
| |
| /* write supported rates */ |
| if (priv->pdev->revision != ADM8211_REV_BA) { |
| rate_buf[0] = ARRAY_SIZE(adm8211_rates); |
| for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++) |
| rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80; |
| } else { |
| /* workaround for rev BA specific bug */ |
| rate_buf[0] = 0x04; |
| rate_buf[1] = 0x82; |
| rate_buf[2] = 0x04; |
| rate_buf[3] = 0x0b; |
| rate_buf[4] = 0x16; |
| } |
| |
| adm8211_write_sram_bytes(dev, ADM8211_SRAM_SUPP_RATE, rate_buf, |
| ARRAY_SIZE(adm8211_rates) + 1); |
| |
| reg = ADM8211_CSR_READ(PLCPHD) & 0x00FFFFFF; /* keep bits 0-23 */ |
| reg |= 1 << 15; /* short preamble */ |
| reg |= 110 << 24; |
| ADM8211_CSR_WRITE(PLCPHD, reg); |
| |
| /* MTMLT = 512 TU (max TX MSDU lifetime) |
| * BCNTSIG = plcp_signal (beacon, probe resp, and atim TX rate) |
| * SRTYLIM = 224 (short retry limit, TX header value is default) */ |
| ADM8211_CSR_WRITE(TXLMT, (512 << 16) | (110 << 8) | (224 << 0)); |
| |
| return 0; |
| } |
| |
| static void adm8211_hw_init(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg; |
| u8 cline; |
| |
| reg = ADM8211_CSR_READ(PAR); |
| reg |= ADM8211_PAR_MRLE | ADM8211_PAR_MRME; |
| reg &= ~(ADM8211_PAR_BAR | ADM8211_PAR_CAL); |
| |
| if (!pci_set_mwi(priv->pdev)) { |
| reg |= 0x1 << 24; |
| pci_read_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, &cline); |
| |
| switch (cline) { |
| case 0x8: reg |= (0x1 << 14); |
| break; |
| case 0x16: reg |= (0x2 << 14); |
| break; |
| case 0x32: reg |= (0x3 << 14); |
| break; |
| default: reg |= (0x0 << 14); |
| break; |
| } |
| } |
| |
| ADM8211_CSR_WRITE(PAR, reg); |
| |
| reg = ADM8211_CSR_READ(CSR_TEST1); |
| reg &= ~(0xF << 28); |
| reg |= (1 << 28) | (1 << 31); |
| ADM8211_CSR_WRITE(CSR_TEST1, reg); |
| |
| /* lose link after 4 lost beacons */ |
| reg = (0x04 << 21) | ADM8211_WCSR_TSFTWE | ADM8211_WCSR_LSOE; |
| ADM8211_CSR_WRITE(WCSR, reg); |
| |
| /* Disable APM, enable receive FIFO threshold, and set drain receive |
| * threshold to store-and-forward */ |
| reg = ADM8211_CSR_READ(CMDR); |
| reg &= ~(ADM8211_CMDR_APM | ADM8211_CMDR_DRT); |
| reg |= ADM8211_CMDR_RTE | ADM8211_CMDR_DRT_SF; |
| ADM8211_CSR_WRITE(CMDR, reg); |
| |
| adm8211_set_rate(dev); |
| |
| /* 4-bit values: |
| * PWR1UP = 8 * 2 ms |
| * PWR0PAPE = 8 us or 5 us |
| * PWR1PAPE = 1 us or 3 us |
| * PWR0TRSW = 5 us |
| * PWR1TRSW = 12 us |
| * PWR0PE2 = 13 us |
| * PWR1PE2 = 1 us |
| * PWR0TXPE = 8 or 6 */ |
| if (priv->pdev->revision < ADM8211_REV_CA) |
| ADM8211_CSR_WRITE(TOFS2, 0x8815cd18); |
| else |
| ADM8211_CSR_WRITE(TOFS2, 0x8535cd16); |
| |
| /* Enable store and forward for transmit */ |
| priv->nar = ADM8211_NAR_SF | ADM8211_NAR_PB; |
| ADM8211_CSR_WRITE(NAR, priv->nar); |
| |
| /* Reset RF */ |
| ADM8211_CSR_WRITE(SYNRF, ADM8211_SYNRF_RADIO); |
| ADM8211_CSR_READ(SYNRF); |
| msleep(10); |
| ADM8211_CSR_WRITE(SYNRF, 0); |
| ADM8211_CSR_READ(SYNRF); |
| msleep(5); |
| |
| /* Set CFP Max Duration to 0x10 TU */ |
| reg = ADM8211_CSR_READ(CFPP); |
| reg &= ~(0xffff << 8); |
| reg |= 0x0010 << 8; |
| ADM8211_CSR_WRITE(CFPP, reg); |
| |
| /* USCNT = 0x16 (number of system clocks, 22 MHz, in 1us |
| * TUCNT = 0x3ff - Tu counter 1024 us */ |
| ADM8211_CSR_WRITE(TOFS0, (0x16 << 24) | 0x3ff); |
| |
| /* SLOT=20 us, SIFS=110 cycles of 22 MHz (5 us), |
| * DIFS=50 us, EIFS=100 us */ |
| if (priv->pdev->revision < ADM8211_REV_CA) |
| ADM8211_CSR_WRITE(IFST, (20 << 23) | (110 << 15) | |
| (50 << 9) | 100); |
| else |
| ADM8211_CSR_WRITE(IFST, (20 << 23) | (24 << 15) | |
| (50 << 9) | 100); |
| |
| /* PCNT = 1 (MAC idle time awake/sleep, unit S) |
| * RMRD = 2346 * 8 + 1 us (max RX duration) */ |
| ADM8211_CSR_WRITE(RMD, (1 << 16) | 18769); |
| |
| /* MART=65535 us, MIRT=256 us, TSFTOFST=0 us */ |
| ADM8211_CSR_WRITE(RSPT, 0xffffff00); |
| |
| /* Initialize BBP (and SYN) */ |
| adm8211_hw_init_bbp(dev); |
| |
| /* make sure interrupts are off */ |
| ADM8211_CSR_WRITE(IER, 0); |
| |
| /* ACK interrupts */ |
| ADM8211_CSR_WRITE(STSR, ADM8211_CSR_READ(STSR)); |
| |
| /* Setup WEP (turns it off for now) */ |
| reg = ADM8211_CSR_READ(MACTEST); |
| reg &= ~(7 << 20); |
| ADM8211_CSR_WRITE(MACTEST, reg); |
| |
| reg = ADM8211_CSR_READ(WEPCTL); |
| reg &= ~ADM8211_WEPCTL_WEPENABLE; |
| reg |= ADM8211_WEPCTL_WEPRXBYP; |
| ADM8211_CSR_WRITE(WEPCTL, reg); |
| |
| /* Clear the missed-packet counter. */ |
| ADM8211_CSR_READ(LPC); |
| } |
| |
| static int adm8211_hw_reset(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg, tmp; |
| int timeout = 100; |
| |
| /* Power-on issue */ |
| /* TODO: check if this is necessary */ |
| ADM8211_CSR_WRITE(FRCTL, 0); |
| |
| /* Reset the chip */ |
| tmp = ADM8211_CSR_READ(PAR); |
| ADM8211_CSR_WRITE(PAR, ADM8211_PAR_SWR); |
| |
| while ((ADM8211_CSR_READ(PAR) & ADM8211_PAR_SWR) && timeout--) |
| msleep(50); |
| |
| if (timeout <= 0) |
| return -ETIMEDOUT; |
| |
| ADM8211_CSR_WRITE(PAR, tmp); |
| |
| if (priv->pdev->revision == ADM8211_REV_BA && |
| (priv->transceiver_type == ADM8211_RFMD2958_RF3000_CONTROL_POWER || |
| priv->transceiver_type == ADM8211_RFMD2958)) { |
| reg = ADM8211_CSR_READ(CSR_TEST1); |
| reg |= (1 << 4) | (1 << 5); |
| ADM8211_CSR_WRITE(CSR_TEST1, reg); |
| } else if (priv->pdev->revision == ADM8211_REV_CA) { |
| reg = ADM8211_CSR_READ(CSR_TEST1); |
| reg &= ~((1 << 4) | (1 << 5)); |
| ADM8211_CSR_WRITE(CSR_TEST1, reg); |
| } |
| |
| ADM8211_CSR_WRITE(FRCTL, 0); |
| |
| reg = ADM8211_CSR_READ(CSR_TEST0); |
| reg |= ADM8211_CSR_TEST0_EPRLD; /* EEPROM Recall */ |
| ADM8211_CSR_WRITE(CSR_TEST0, reg); |
| |
| adm8211_clear_sram(dev); |
| |
| return 0; |
| } |
| |
| static u64 adm8211_get_tsft(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 tsftl; |
| u64 tsft; |
| |
| tsftl = ADM8211_CSR_READ(TSFTL); |
| tsft = ADM8211_CSR_READ(TSFTH); |
| tsft <<= 32; |
| tsft |= tsftl; |
| |
| return tsft; |
| } |
| |
| static void adm8211_set_interval(struct ieee80211_hw *dev, |
| unsigned short bi, unsigned short li) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg; |
| |
| /* BP (beacon interval) = data->beacon_interval |
| * LI (listen interval) = data->listen_interval (in beacon intervals) */ |
| reg = (bi << 16) | li; |
| ADM8211_CSR_WRITE(BPLI, reg); |
| } |
| |
| static void adm8211_set_bssid(struct ieee80211_hw *dev, const u8 *bssid) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| u32 reg; |
| |
| ADM8211_CSR_WRITE(BSSID0, le32_to_cpu(*(__le32 *)bssid)); |
| reg = ADM8211_CSR_READ(ABDA1); |
| reg &= 0x0000ffff; |
| reg |= (bssid[4] << 16) | (bssid[5] << 24); |
| ADM8211_CSR_WRITE(ABDA1, reg); |
| } |
| |
| static int adm8211_config(struct ieee80211_hw *dev, u32 changed) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| struct ieee80211_conf *conf = &dev->conf; |
| int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); |
| |
| if (channel != priv->channel) { |
| priv->channel = channel; |
| adm8211_rf_set_channel(dev, priv->channel); |
| } |
| |
| return 0; |
| } |
| |
| static void adm8211_bss_info_changed(struct ieee80211_hw *dev, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *conf, |
| u32 changes) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| |
| if (!(changes & BSS_CHANGED_BSSID)) |
| return; |
| |
| if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) { |
| adm8211_set_bssid(dev, conf->bssid); |
| memcpy(priv->bssid, conf->bssid, ETH_ALEN); |
| } |
| } |
| |
| static u64 adm8211_prepare_multicast(struct ieee80211_hw *hw, |
| struct netdev_hw_addr_list *mc_list) |
| { |
| unsigned int bit_nr; |
| u32 mc_filter[2]; |
| struct netdev_hw_addr *ha; |
| |
| mc_filter[1] = mc_filter[0] = 0; |
| |
| netdev_hw_addr_list_for_each(ha, mc_list) { |
| bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; |
| |
| bit_nr &= 0x3F; |
| mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); |
| } |
| |
| return mc_filter[0] | ((u64)(mc_filter[1]) << 32); |
| } |
| |
| static void adm8211_configure_filter(struct ieee80211_hw *dev, |
| unsigned int changed_flags, |
| unsigned int *total_flags, |
| u64 multicast) |
| { |
| static const u8 bcast[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; |
| struct adm8211_priv *priv = dev->priv; |
| unsigned int new_flags; |
| u32 mc_filter[2]; |
| |
| mc_filter[0] = multicast; |
| mc_filter[1] = multicast >> 32; |
| |
| new_flags = 0; |
| |
| if (*total_flags & FIF_PROMISC_IN_BSS) { |
| new_flags |= FIF_PROMISC_IN_BSS; |
| priv->nar |= ADM8211_NAR_PR; |
| priv->nar &= ~ADM8211_NAR_MM; |
| mc_filter[1] = mc_filter[0] = ~0; |
| } else if (*total_flags & FIF_ALLMULTI || multicast == ~(0ULL)) { |
| new_flags |= FIF_ALLMULTI; |
| priv->nar &= ~ADM8211_NAR_PR; |
| priv->nar |= ADM8211_NAR_MM; |
| mc_filter[1] = mc_filter[0] = ~0; |
| } else { |
| priv->nar &= ~(ADM8211_NAR_MM | ADM8211_NAR_PR); |
| } |
| |
| ADM8211_IDLE_RX(); |
| |
| ADM8211_CSR_WRITE(MAR0, mc_filter[0]); |
| ADM8211_CSR_WRITE(MAR1, mc_filter[1]); |
| ADM8211_CSR_READ(NAR); |
| |
| if (priv->nar & ADM8211_NAR_PR) |
| dev->flags |= IEEE80211_HW_RX_INCLUDES_FCS; |
| else |
| dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; |
| |
| if (*total_flags & FIF_BCN_PRBRESP_PROMISC) |
| adm8211_set_bssid(dev, bcast); |
| else |
| adm8211_set_bssid(dev, priv->bssid); |
| |
| ADM8211_RESTORE(); |
| |
| *total_flags = new_flags; |
| } |
| |
| static int adm8211_add_interface(struct ieee80211_hw *dev, |
| struct ieee80211_vif *vif) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| if (priv->mode != NL80211_IFTYPE_MONITOR) |
| return -EOPNOTSUPP; |
| |
| switch (vif->type) { |
| case NL80211_IFTYPE_STATION: |
| priv->mode = vif->type; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| ADM8211_IDLE(); |
| |
| ADM8211_CSR_WRITE(PAR0, le32_to_cpu(*(__le32 *)vif->addr)); |
| ADM8211_CSR_WRITE(PAR1, le16_to_cpu(*(__le16 *)(vif->addr + 4))); |
| |
| adm8211_update_mode(dev); |
| |
| ADM8211_RESTORE(); |
| |
| return 0; |
| } |
| |
| static void adm8211_remove_interface(struct ieee80211_hw *dev, |
| struct ieee80211_vif *vif) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| priv->mode = NL80211_IFTYPE_MONITOR; |
| } |
| |
| static int adm8211_init_rings(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| struct adm8211_desc *desc = NULL; |
| struct adm8211_rx_ring_info *rx_info; |
| struct adm8211_tx_ring_info *tx_info; |
| unsigned int i; |
| |
| for (i = 0; i < priv->rx_ring_size; i++) { |
| desc = &priv->rx_ring[i]; |
| desc->status = 0; |
| desc->length = cpu_to_le32(RX_PKT_SIZE); |
| priv->rx_buffers[i].skb = NULL; |
| } |
| /* Mark the end of RX ring; hw returns to base address after this |
| * descriptor */ |
| desc->length |= cpu_to_le32(RDES1_CONTROL_RER); |
| |
| for (i = 0; i < priv->rx_ring_size; i++) { |
| desc = &priv->rx_ring[i]; |
| rx_info = &priv->rx_buffers[i]; |
| |
| rx_info->skb = dev_alloc_skb(RX_PKT_SIZE); |
| if (rx_info->skb == NULL) |
| break; |
| rx_info->mapping = pci_map_single(priv->pdev, |
| skb_tail_pointer(rx_info->skb), |
| RX_PKT_SIZE, |
| PCI_DMA_FROMDEVICE); |
| desc->buffer1 = cpu_to_le32(rx_info->mapping); |
| desc->status = cpu_to_le32(RDES0_STATUS_OWN | RDES0_STATUS_SQL); |
| } |
| |
| /* Setup TX ring. TX buffers descriptors will be filled in as needed */ |
| for (i = 0; i < priv->tx_ring_size; i++) { |
| desc = &priv->tx_ring[i]; |
| tx_info = &priv->tx_buffers[i]; |
| |
| tx_info->skb = NULL; |
| tx_info->mapping = 0; |
| desc->status = 0; |
| } |
| desc->length = cpu_to_le32(TDES1_CONTROL_TER); |
| |
| priv->cur_rx = priv->cur_tx = priv->dirty_tx = 0; |
| ADM8211_CSR_WRITE(RDB, priv->rx_ring_dma); |
| ADM8211_CSR_WRITE(TDBD, priv->tx_ring_dma); |
| |
| return 0; |
| } |
| |
| static void adm8211_free_rings(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| unsigned int i; |
| |
| for (i = 0; i < priv->rx_ring_size; i++) { |
| if (!priv->rx_buffers[i].skb) |
| continue; |
| |
| pci_unmap_single( |
| priv->pdev, |
| priv->rx_buffers[i].mapping, |
| RX_PKT_SIZE, PCI_DMA_FROMDEVICE); |
| |
| dev_kfree_skb(priv->rx_buffers[i].skb); |
| } |
| |
| for (i = 0; i < priv->tx_ring_size; i++) { |
| if (!priv->tx_buffers[i].skb) |
| continue; |
| |
| pci_unmap_single(priv->pdev, |
| priv->tx_buffers[i].mapping, |
| priv->tx_buffers[i].skb->len, |
| PCI_DMA_TODEVICE); |
| |
| dev_kfree_skb(priv->tx_buffers[i].skb); |
| } |
| } |
| |
| static int adm8211_start(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| int retval; |
| |
| /* Power up MAC and RF chips */ |
| retval = adm8211_hw_reset(dev); |
| if (retval) { |
| printk(KERN_ERR "%s: hardware reset failed\n", |
| wiphy_name(dev->wiphy)); |
| goto fail; |
| } |
| |
| retval = adm8211_init_rings(dev); |
| if (retval) { |
| printk(KERN_ERR "%s: failed to initialize rings\n", |
| wiphy_name(dev->wiphy)); |
| goto fail; |
| } |
| |
| /* Init hardware */ |
| adm8211_hw_init(dev); |
| adm8211_rf_set_channel(dev, priv->channel); |
| |
| retval = request_irq(priv->pdev->irq, adm8211_interrupt, |
| IRQF_SHARED, "adm8211", dev); |
| if (retval) { |
| printk(KERN_ERR "%s: failed to register IRQ handler\n", |
| wiphy_name(dev->wiphy)); |
| goto fail; |
| } |
| |
| ADM8211_CSR_WRITE(IER, ADM8211_IER_NIE | ADM8211_IER_AIE | |
| ADM8211_IER_RCIE | ADM8211_IER_TCIE | |
| ADM8211_IER_TDUIE | ADM8211_IER_GPTIE); |
| priv->mode = NL80211_IFTYPE_MONITOR; |
| adm8211_update_mode(dev); |
| ADM8211_CSR_WRITE(RDR, 0); |
| |
| adm8211_set_interval(dev, 100, 10); |
| return 0; |
| |
| fail: |
| return retval; |
| } |
| |
| static void adm8211_stop(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| |
| priv->mode = NL80211_IFTYPE_UNSPECIFIED; |
| priv->nar = 0; |
| ADM8211_CSR_WRITE(NAR, 0); |
| ADM8211_CSR_WRITE(IER, 0); |
| ADM8211_CSR_READ(NAR); |
| |
| free_irq(priv->pdev->irq, dev); |
| |
| adm8211_free_rings(dev); |
| } |
| |
| static void adm8211_calc_durations(int *dur, int *plcp, size_t payload_len, int len, |
| int plcp_signal, int short_preamble) |
| { |
| /* Alternative calculation from NetBSD: */ |
| |
| /* IEEE 802.11b durations for DSSS PHY in microseconds */ |
| #define IEEE80211_DUR_DS_LONG_PREAMBLE 144 |
| #define IEEE80211_DUR_DS_SHORT_PREAMBLE 72 |
| #define IEEE80211_DUR_DS_FAST_PLCPHDR 24 |
| #define IEEE80211_DUR_DS_SLOW_PLCPHDR 48 |
| #define IEEE80211_DUR_DS_SLOW_ACK 112 |
| #define IEEE80211_DUR_DS_FAST_ACK 56 |
| #define IEEE80211_DUR_DS_SLOW_CTS 112 |
| #define IEEE80211_DUR_DS_FAST_CTS 56 |
| #define IEEE80211_DUR_DS_SLOT 20 |
| #define IEEE80211_DUR_DS_SIFS 10 |
| |
| int remainder; |
| |
| *dur = (80 * (24 + payload_len) + plcp_signal - 1) |
| / plcp_signal; |
| |
| if (plcp_signal <= PLCP_SIGNAL_2M) |
| /* 1-2Mbps WLAN: send ACK/CTS at 1Mbps */ |
| *dur += 3 * (IEEE80211_DUR_DS_SIFS + |
| IEEE80211_DUR_DS_SHORT_PREAMBLE + |
| IEEE80211_DUR_DS_FAST_PLCPHDR) + |
| IEEE80211_DUR_DS_SLOW_CTS + IEEE80211_DUR_DS_SLOW_ACK; |
| else |
| /* 5-11Mbps WLAN: send ACK/CTS at 2Mbps */ |
| *dur += 3 * (IEEE80211_DUR_DS_SIFS + |
| IEEE80211_DUR_DS_SHORT_PREAMBLE + |
| IEEE80211_DUR_DS_FAST_PLCPHDR) + |
| IEEE80211_DUR_DS_FAST_CTS + IEEE80211_DUR_DS_FAST_ACK; |
| |
| /* lengthen duration if long preamble */ |
| if (!short_preamble) |
| *dur += 3 * (IEEE80211_DUR_DS_LONG_PREAMBLE - |
| IEEE80211_DUR_DS_SHORT_PREAMBLE) + |
| 3 * (IEEE80211_DUR_DS_SLOW_PLCPHDR - |
| IEEE80211_DUR_DS_FAST_PLCPHDR); |
| |
| |
| *plcp = (80 * len) / plcp_signal; |
| remainder = (80 * len) % plcp_signal; |
| if (plcp_signal == PLCP_SIGNAL_11M && |
| remainder <= 30 && remainder > 0) |
| *plcp = (*plcp | 0x8000) + 1; |
| else if (remainder) |
| (*plcp)++; |
| } |
| |
| /* Transmit skb w/adm8211_tx_hdr (802.11 header created by hardware) */ |
| static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb, |
| u16 plcp_signal, |
| size_t hdrlen) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| unsigned long flags; |
| dma_addr_t mapping; |
| unsigned int entry; |
| u32 flag; |
| |
| mapping = pci_map_single(priv->pdev, skb->data, skb->len, |
| PCI_DMA_TODEVICE); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size / 2) |
| flag = TDES1_CONTROL_IC | TDES1_CONTROL_LS | TDES1_CONTROL_FS; |
| else |
| flag = TDES1_CONTROL_LS | TDES1_CONTROL_FS; |
| |
| if (priv->cur_tx - priv->dirty_tx == priv->tx_ring_size - 2) |
| ieee80211_stop_queue(dev, 0); |
| |
| entry = priv->cur_tx % priv->tx_ring_size; |
| |
| priv->tx_buffers[entry].skb = skb; |
| priv->tx_buffers[entry].mapping = mapping; |
| priv->tx_buffers[entry].hdrlen = hdrlen; |
| priv->tx_ring[entry].buffer1 = cpu_to_le32(mapping); |
| |
| if (entry == priv->tx_ring_size - 1) |
| flag |= TDES1_CONTROL_TER; |
| priv->tx_ring[entry].length = cpu_to_le32(flag | skb->len); |
| |
| /* Set TX rate (SIGNAL field in PLCP PPDU format) */ |
| flag = TDES0_CONTROL_OWN | (plcp_signal << 20) | 8 /* ? */; |
| priv->tx_ring[entry].status = cpu_to_le32(flag); |
| |
| priv->cur_tx++; |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* Trigger transmit poll */ |
| ADM8211_CSR_WRITE(TDR, 0); |
| } |
| |
| /* Put adm8211_tx_hdr on skb and transmit */ |
| static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) |
| { |
| struct adm8211_tx_hdr *txhdr; |
| size_t payload_len, hdrlen; |
| int plcp, dur, len, plcp_signal, short_preamble; |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info); |
| u8 rc_flags; |
| |
| rc_flags = info->control.rates[0].flags; |
| short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE); |
| plcp_signal = txrate->bitrate; |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); |
| memcpy(skb->cb, skb->data, hdrlen); |
| hdr = (struct ieee80211_hdr *)skb->cb; |
| skb_pull(skb, hdrlen); |
| payload_len = skb->len; |
| |
| txhdr = (struct adm8211_tx_hdr *) skb_push(skb, sizeof(*txhdr)); |
| memset(txhdr, 0, sizeof(*txhdr)); |
| memcpy(txhdr->da, ieee80211_get_DA(hdr), ETH_ALEN); |
| txhdr->signal = plcp_signal; |
| txhdr->frame_body_size = cpu_to_le16(payload_len); |
| txhdr->frame_control = hdr->frame_control; |
| |
| len = hdrlen + payload_len + FCS_LEN; |
| |
| txhdr->frag = cpu_to_le16(0x0FFF); |
| adm8211_calc_durations(&dur, &plcp, payload_len, |
| len, plcp_signal, short_preamble); |
| txhdr->plcp_frag_head_len = cpu_to_le16(plcp); |
| txhdr->plcp_frag_tail_len = cpu_to_le16(plcp); |
| txhdr->dur_frag_head = cpu_to_le16(dur); |
| txhdr->dur_frag_tail = cpu_to_le16(dur); |
| |
| txhdr->header_control = cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER); |
| |
| if (short_preamble) |
| txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE); |
| |
| if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) |
| txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS); |
| |
| txhdr->retry_limit = info->control.rates[0].count; |
| |
| adm8211_tx_raw(dev, skb, plcp_signal, hdrlen); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static int adm8211_alloc_rings(struct ieee80211_hw *dev) |
| { |
| struct adm8211_priv *priv = dev->priv; |
| unsigned int ring_size; |
| |
| priv->rx_buffers = kmalloc(sizeof(*priv->rx_buffers) * priv->rx_ring_size + |
| sizeof(*priv->tx_buffers) * priv->tx_ring_size, GFP_KERNEL); |
| if (!priv->rx_buffers) |
| return -ENOMEM; |
| |
| priv->tx_buffers = (void *)priv->rx_buffers + |
| sizeof(*priv->rx_buffers) * priv->rx_ring_size; |
| |
| /* Allocate TX/RX descriptors */ |
| ring_size = sizeof(struct adm8211_desc) * priv->rx_ring_size + |
| sizeof(struct adm8211_desc) * priv->tx_ring_size; |
| priv->rx_ring = pci_alloc_consistent(priv->pdev, ring_size, |
| &priv->rx_ring_dma); |
| |
| if (!priv->rx_ring) { |
| kfree(priv->rx_buffers); |
| priv->rx_buffers = NULL; |
| priv->tx_buffers = NULL; |
| return -ENOMEM; |
| } |
| |
| priv->tx_ring = (struct adm8211_desc *)(priv->rx_ring + |
| priv->rx_ring_size); |
| priv->tx_ring_dma = priv->rx_ring_dma + |
| sizeof(struct adm8211_desc) * priv->rx_ring_size; |
| |
| return 0; |
| } |
| |
| static const struct ieee80211_ops adm8211_ops = { |
| .tx = adm8211_tx, |
| .start = adm8211_start, |
| .stop = adm8211_stop, |
| .add_interface = adm8211_add_interface, |
| .remove_interface = adm8211_remove_interface, |
| .config = adm8211_config, |
| .bss_info_changed = adm8211_bss_info_changed, |
| .prepare_multicast = adm8211_prepare_multicast, |
| .configure_filter = adm8211_configure_filter, |
| .get_stats = adm8211_get_stats, |
| .get_tsf = adm8211_get_tsft |
| }; |
| |
| static int __devinit adm8211_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct ieee80211_hw *dev; |
| struct adm8211_priv *priv; |
| unsigned long mem_addr, mem_len; |
| unsigned int io_addr, io_len; |
| int err; |
| u32 reg; |
| u8 perm_addr[ETH_ALEN]; |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n", |
| pci_name(pdev)); |
| return err; |
| } |
| |
| io_addr = pci_resource_start(pdev, 0); |
| io_len = pci_resource_len(pdev, 0); |
| mem_addr = pci_resource_start(pdev, 1); |
| mem_len = pci_resource_len(pdev, 1); |
| if (io_len < 256 || mem_len < 1024) { |
| printk(KERN_ERR "%s (adm8211): Too short PCI resources\n", |
| pci_name(pdev)); |
| goto err_disable_pdev; |
| } |
| |
| |
| /* check signature */ |
| pci_read_config_dword(pdev, 0x80 /* CR32 */, ®); |
| if (reg != ADM8211_SIG1 && reg != ADM8211_SIG2) { |
| printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n", |
| pci_name(pdev), reg); |
| goto err_disable_pdev; |
| } |
| |
| err = pci_request_regions(pdev, "adm8211"); |
| if (err) { |
| printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n", |
| pci_name(pdev)); |
| return err; /* someone else grabbed it? don't disable it */ |
| } |
| |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) || |
| pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| printk(KERN_ERR "%s (adm8211): No suitable DMA available\n", |
| pci_name(pdev)); |
| goto err_free_reg; |
| } |
| |
| pci_set_master(pdev); |
| |
| dev = ieee80211_alloc_hw(sizeof(*priv), &adm8211_ops); |
| if (!dev) { |
| printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n", |
| pci_name(pdev)); |
| err = -ENOMEM; |
| goto err_free_reg; |
| } |
| priv = dev->priv; |
| priv->pdev = pdev; |
| |
| spin_lock_init(&priv->lock); |
| |
| SET_IEEE80211_DEV(dev, &pdev->dev); |
| |
| pci_set_drvdata(pdev, dev); |
| |
| priv->map = pci_iomap(pdev, 1, mem_len); |
| if (!priv->map) |
| priv->map = pci_iomap(pdev, 0, io_len); |
| |
| if (!priv->map) { |
| printk(KERN_ERR "%s (adm8211): Cannot map device memory\n", |
| pci_name(pdev)); |
| goto err_free_dev; |
| } |
| |
| priv->rx_ring_size = rx_ring_size; |
| priv->tx_ring_size = tx_ring_size; |
| |
| if (adm8211_alloc_rings(dev)) { |
| printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n", |
| pci_name(pdev)); |
| goto err_iounmap; |
| } |
| |
| *(__le32 *)perm_addr = cpu_to_le32(ADM8211_CSR_READ(PAR0)); |
| *(__le16 *)&perm_addr[4] = |
| cpu_to_le16(ADM8211_CSR_READ(PAR1) & 0xFFFF); |
| |
| if (!is_valid_ether_addr(perm_addr)) { |
| printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n", |
| pci_name(pdev)); |
| random_ether_addr(perm_addr); |
| } |
| SET_IEEE80211_PERM_ADDR(dev, perm_addr); |
| |
| dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr); |
| /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */ |
| dev->flags = IEEE80211_HW_SIGNAL_UNSPEC; |
| dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); |
| |
| dev->channel_change_time = 1000; |
| dev->max_signal = 100; /* FIXME: find better value */ |
| |
| dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */ |
| |
| priv->retry_limit = 3; |
| priv->ant_power = 0x40; |
| priv->tx_power = 0x40; |
| priv->lpf_cutoff = 0xFF; |
| priv->lnags_threshold = 0xFF; |
| priv->mode = NL80211_IFTYPE_UNSPECIFIED; |
| |
| /* Power-on issue. EEPROM won't read correctly without */ |
| if (pdev->revision >= ADM8211_REV_BA) { |
| ADM8211_CSR_WRITE(FRCTL, 0); |
| ADM8211_CSR_READ(FRCTL); |
| ADM8211_CSR_WRITE(FRCTL, 1); |
| ADM8211_CSR_READ(FRCTL); |
| msleep(100); |
| } |
| |
| err = adm8211_read_eeprom(dev); |
| if (err) { |
| printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n", |
| pci_name(pdev)); |
| goto err_free_desc; |
| } |
| |
| priv->channel = 1; |
| |
| dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; |
| |
| err = ieee80211_register_hw(dev); |
| if (err) { |
| printk(KERN_ERR "%s (adm8211): Cannot register device\n", |
| pci_name(pdev)); |
| goto err_free_desc; |
| } |
| |
| printk(KERN_INFO "%s: hwaddr %pM, Rev 0x%02x\n", |
| wiphy_name(dev->wiphy), dev->wiphy->perm_addr, |
| pdev->revision); |
| |
| return 0; |
| |
| err_free_desc: |
| pci_free_consistent(pdev, |
| sizeof(struct adm8211_desc) * priv->rx_ring_size + |
| sizeof(struct adm8211_desc) * priv->tx_ring_size, |
| priv->rx_ring, priv->rx_ring_dma); |
| kfree(priv->rx_buffers); |
| |
| err_iounmap: |
| pci_iounmap(pdev, priv->map); |
| |
| err_free_dev: |
| pci_set_drvdata(pdev, NULL); |
| ieee80211_free_hw(dev); |
| |
| err_free_reg: |
| pci_release_regions(pdev); |
| |
| err_disable_pdev: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| |
| static void __devexit adm8211_remove(struct pci_dev *pdev) |
| { |
| struct ieee80211_hw *dev = pci_get_drvdata(pdev); |
| struct adm8211_priv *priv; |
| |
| if (!dev) |
| return; |
| |
| ieee80211_unregister_hw(dev); |
| |
| priv = dev->priv; |
| |
| pci_free_consistent(pdev, |
| sizeof(struct adm8211_desc) * priv->rx_ring_size + |
| sizeof(struct adm8211_desc) * priv->tx_ring_size, |
| priv->rx_ring, priv->rx_ring_dma); |
| |
| kfree(priv->rx_buffers); |
| kfree(priv->eeprom); |
| pci_iounmap(pdev, priv->map); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| ieee80211_free_hw(dev); |
| } |
| |
| |
| #ifdef CONFIG_PM |
| static int adm8211_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| pci_save_state(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| return 0; |
| } |
| |
| static int adm8211_resume(struct pci_dev *pdev) |
| { |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| |
| MODULE_DEVICE_TABLE(pci, adm8211_pci_id_table); |
| |
| /* TODO: implement enable_wake */ |
| static struct pci_driver adm8211_driver = { |
| .name = "adm8211", |
| .id_table = adm8211_pci_id_table, |
| .probe = adm8211_probe, |
| .remove = __devexit_p(adm8211_remove), |
| #ifdef CONFIG_PM |
| .suspend = adm8211_suspend, |
| .resume = adm8211_resume, |
| #endif /* CONFIG_PM */ |
| }; |
| |
| |
| |
| static int __init adm8211_init(void) |
| { |
| return pci_register_driver(&adm8211_driver); |
| } |
| |
| |
| static void __exit adm8211_exit(void) |
| { |
| pci_unregister_driver(&adm8211_driver); |
| } |
| |
| |
| module_init(adm8211_init); |
| module_exit(adm8211_exit); |