diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index bf0cee6..099f46c 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -748,6 +748,18 @@
 
 	pci_pm_set_unknown_state(pci_dev);
 
+	/*
+	 * Some BIOSes from ASUS have a bug: If a USB EHCI host controller's
+	 * PCI COMMAND register isn't 0, the BIOS assumes that the controller
+	 * hasn't been quiesced and tries to turn it off.  If the controller
+	 * is already in D3, this can hang or cause memory corruption.
+	 *
+	 * Since the value of the COMMAND register doesn't matter once the
+	 * device has been suspended, we can safely set it to 0 here.
+	 */
+	if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+		pci_write_config_word(pci_dev, PCI_COMMAND, 0);
+
 	return 0;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 77cb54a..447e834 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1744,11 +1744,6 @@
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
-	/* Some devices mustn't be in D3 during system sleep */
-	if (target_state == PCI_D3hot &&
-			(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
-		return 0;
-
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
 	error = pci_set_power_state(dev, target_state);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 194b243a..2a75216 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2929,32 +2929,6 @@
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
 
-/*
- * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
- * ASUS motherboards will cause memory corruption or a system crash
- * if they are in D3 while the system is put into S3 sleep.
- */
-static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
-{
-	const char *sys_info;
-	static const char good_Asus_board[] = "P8Z68-V";
-
-	if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
-		return;
-	if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
-		return;
-	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
-	if (sys_info && memcmp(sys_info, good_Asus_board,
-			sizeof(good_Asus_board) - 1) == 0)
-		return;
-
-	dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
-	dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
-	device_set_wakeup_capable(&dev->dev, false);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
-
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 8fd398d..ee46927 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -500,6 +500,8 @@
 			goto retry;
 		}
 		if (!desc->reslength) { /* zero length read */
+			dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
+			clear_bit(WDM_READ, &desc->flags);
 			spin_unlock_irq(&desc->iuspin);
 			goto retry;
 		}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 25a7422..8fb4849 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2324,12 +2324,16 @@
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm);
 
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
 {
 	return hub_is_superspeed(hub->hdev) &&
-		(portstatus & USB_PORT_STAT_LINK_STATE) ==
-		USB_SS_PORT_LS_SS_INACTIVE;
+		(((portstatus & USB_PORT_STAT_LINK_STATE) ==
+		  USB_SS_PORT_LS_SS_INACTIVE) ||
+		 ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+		  USB_SS_PORT_LS_COMP_MOD)) ;
 }
 
 static int hub_port_wait_reset(struct usb_hub *hub, int port1,
@@ -2365,7 +2369,7 @@
 			 *
 			 * See https://bugzilla.kernel.org/show_bug.cgi?id=41752
 			 */
-			if (hub_port_inactive(hub, portstatus)) {
+			if (hub_port_warm_reset_required(hub, portstatus)) {
 				int ret;
 
 				if ((portchange & USB_PORT_STAT_C_CONNECTION))
@@ -4408,9 +4412,7 @@
 			/* Warm reset a USB3 protocol port if it's in
 			 * SS.Inactive state.
 			 */
-			if (hub_is_superspeed(hub->hdev) &&
-				(portstatus & USB_PORT_STAT_LINK_STATE)
-					== USB_SS_PORT_LS_SS_INACTIVE) {
+			if (hub_port_warm_reset_required(hub, portstatus)) {
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
 				hub_port_reset(hub, i, NULL,
 						HUB_BH_RESET_TIME, true);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 2732ef6..7b01094 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -462,6 +462,42 @@
 	}
 }
 
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+	u32 pls = status_reg & PORT_PLS_MASK;
+
+	/* resume state is a xHCI internal state.
+	 * Do not report it to usb core.
+	 */
+	if (pls == XDEV_RESUME)
+		return;
+
+	/* When the CAS bit is set then warm reset
+	 * should be performed on port
+	 */
+	if (status_reg & PORT_CAS) {
+		/* The CAS bit can be set while the port is
+		 * in any link state.
+		 * Only roothubs have CAS bit, so we
+		 * pretend to be in compliance mode
+		 * unless we're already in compliance
+		 * or the inactive state.
+		 */
+		if (pls != USB_SS_PORT_LS_COMP_MOD &&
+		    pls != USB_SS_PORT_LS_SS_INACTIVE) {
+			pls = USB_SS_PORT_LS_COMP_MOD;
+		}
+		/* Return also connection bit -
+		 * hub state machine resets port
+		 * when this bit is set.
+		 */
+		pls |= USB_PORT_STAT_CONNECTION;
+	}
+	/* update status field */
+	*status |= pls;
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		u16 wIndex, char *buf, u16 wLength)
 {
@@ -606,13 +642,9 @@
 			else
 				status |= USB_PORT_STAT_POWER;
 		}
-		/* Port Link State */
+		/* Update Port Link State for super speed ports*/
 		if (hcd->speed == HCD_USB3) {
-			/* resume state is a xHCI internal state.
-			 * Do not report it to usb core.
-			 */
-			if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
-				status |= (temp & PORT_PLS_MASK);
+			xhci_hub_report_link_state(&status, temp);
 		}
 		if (bus_state->port_c_suspend & (1 << wIndex))
 			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 23b4aef..8275645 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -885,6 +885,17 @@
 	num_trbs_free_temp = ep_ring->num_trbs_free;
 	dequeue_temp = ep_ring->dequeue;
 
+	/* If we get two back-to-back stalls, and the first stalled transfer
+	 * ends just before a link TRB, the dequeue pointer will be left on
+	 * the link TRB by the code in the while loop.  So we have to update
+	 * the dequeue pointer one segment further, or we'll jump off
+	 * the segment into la-la-land.
+	 */
+	if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+		ep_ring->deq_seg = ep_ring->deq_seg->next;
+		ep_ring->dequeue = ep_ring->deq_seg->trbs;
+	}
+
 	while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
 		/* We have more usable TRBs */
 		ep_ring->num_trbs_free++;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index de3d6e3..55c0785 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -341,7 +341,11 @@
 #define PORT_PLC	(1 << 22)
 /* port configure error change - port failed to configure its link partner */
 #define PORT_CEC	(1 << 23)
-/* bit 24 reserved */
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS	(1 << 24)
 /* wake on connect (enable) */
 #define PORT_WKCONN_E	(1 << 25)
 /* wake on disconnect (enable) */
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 81423f7..d47eb06 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -222,14 +222,6 @@
 	metro_priv->throttled = 0;
 	spin_unlock_irqrestore(&metro_priv->lock, flags);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Clear the urb pipe. */
 	usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index adf8ce7..417ab1b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -497,6 +497,15 @@
 
 /* MediaTek products */
 #define MEDIATEK_VENDOR_ID			0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM		0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM		0x00a5
+#define MEDIATEK_PRODUCT_DC_5COM		0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM		0x7101
+#define MEDIATEK_PRODUCT_7208_2COM		0x7102
+#define MEDIATEK_PRODUCT_FP_1COM		0x0003
+#define MEDIATEK_PRODUCT_FP_2COM		0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM		0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM		0x0033
 
 /* Cellient products */
 #define CELLIENT_VENDOR_ID			0x2692
@@ -554,6 +563,10 @@
 	.reserved = BIT(1),
 };
 
+static const struct option_blacklist_info net_intf2_blacklist = {
+	.reserved = BIT(2),
+};
+
 static const struct option_blacklist_info net_intf3_blacklist = {
 	.reserved = BIT(3),
 };
@@ -1099,6 +1112,8 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf2_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
 	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
@@ -1240,6 +1255,17 @@
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
 	{ } /* Terminating entry */
 };
diff --git a/include/linux/pci.h b/include/linux/pci.h
index fefb4e1..d8c379d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -176,8 +176,6 @@
 	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 	/* Provide indication device is assigned by a Virtual Machine Manager */
 	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
-	/* Device causes system crash if in D3 during S3 sleep */
-	PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
 };
 
 enum pci_irq_reroute_variant {