diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
new file mode 100644
index 0000000..a8993a0
--- /dev/null
+++ b/net/ax25/Kconfig
@@ -0,0 +1,110 @@
+#
+# Amateur Radio protocols and AX.25 device configuration
+#
+# 19971130	Now in an own category to make correct compilation of the
+#		AX.25 stuff easier...
+#		Joerg Reuter DL1BKE <jreuter@yaina.de>
+# 19980129	Moved to net/ax25/Config.in, sourcing device drivers.
+
+menuconfig HAMRADIO
+	depends on NET
+	bool "Amateur Radio support"
+	help
+	  If you want to connect your Linux box to an amateur radio, answer Y
+	  here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
+	  the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about amateur radio.
+
+comment "Packet Radio protocols"
+	depends on HAMRADIO && NET
+
+config AX25
+	tristate "Amateur Radio AX.25 Level 2 protocol"
+	depends on HAMRADIO && NET
+	---help---
+	  This is the protocol used for computer communication over amateur
+	  radio. It is either used by itself for point-to-point links, or to
+	  carry other protocols such as tcp/ip. To use it, you need a device
+	  that connects your Linux box to your amateur radio. You can either
+	  use a low speed TNC (a Terminal Node Controller acts as a kind of
+	  modem connecting your computer's serial port to your radio's
+	  microphone input and speaker output) supporting the KISS protocol or
+	  one of the various SCC cards that are supported by the generic Z8530
+	  or the DMA SCC driver. Another option are the Baycom modem serial
+	  and parallel port hacks or the sound card modem (supported by their
+	  own drivers). If you say Y here, you also have to say Y to one of
+	  those drivers.
+
+	  Information about where to get supporting software for Linux amateur
+	  radio as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. You might also want to
+	  check out the file <file:Documentation/networking/ax25.txt> in the
+	  kernel source. More information about digital amateur radio in
+	  general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ax25.
+
+config AX25_DAMA_SLAVE
+	bool "AX.25 DAMA Slave support"
+	depends on AX25
+	help
+	  DAMA is a mechanism to prevent collisions when doing AX.25
+	  networking. A DAMA server (called "master") accepts incoming traffic
+	  from clients (called "slaves") and redistributes it to other slaves.
+	  If you say Y here, your Linux box will act as a DAMA slave; this is
+	  transparent in that you don't have to do any special DAMA
+	  configuration. (Linux cannot yet act as a DAMA server.) If unsure,
+	  say N.
+
+#	 bool '    AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
+config NETROM
+	tristate "Amateur Radio NET/ROM protocol"
+	depends on AX25
+	---help---
+	  NET/ROM is a network layer protocol on top of AX.25 useful for
+	  routing.
+
+	  A comprehensive listing of all the software for Linux amateur radio
+	  users as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. You also might want to
+	  check out the file <file:Documentation/networking/ax25.txt>. More
+	  information about digital amateur radio in general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called netrom.
+
+config ROSE
+	tristate "Amateur Radio X.25 PLP (Rose)"
+	depends on AX25
+	---help---
+	  The Packet Layer Protocol (PLP) is a way to route packets over X.25
+	  connections in general and amateur radio AX.25 connections in
+	  particular, essentially an alternative to NET/ROM.
+
+	  A comprehensive listing of all the software for Linux amateur radio
+	  users as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  You also might want to
+	  check out the file <file:Documentation/networking/ax25.txt>. More
+	  information about digital amateur radio in general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rose.
+
+
+menu "AX.25 network device drivers"
+	depends on HAMRADIO && NET && AX25!=n
+
+source "drivers/net/hamradio/Kconfig"
+
+endmenu
+