V4L/DVB (6619): Use MTS firmware for the HVR-900
The HVR-900 requires the MTS version of the xc3028 firmware in order
to get any sound. The below patch selects this firmware variant on
HVR-900 cards, as well as splitting the HVR-950 into its own entry
(since I don't know if it uses the MTS variant and it will have to be
split off eventually anyway).
Signed-off-by: Aidan Thornton <makosoft@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index f809834..94b53bd 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -8,9 +8,10 @@
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]
- 10 -> Hauppauge WinTV HVR 900/950 (em2880)
+ 10 -> Hauppauge WinTV HVR 900 (em2880)
11 -> Terratec Hybrid XS (em2880)
12 -> Kworld PVR TV 2800 RF (em2820/em2840)
13 -> Terratec Prodigy XS (em2880)
14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
15 -> V-Gear PocketTV (em2800)
+ 16 -> Hauppauge WinTV HVR 950 (em2880)
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index fd64058..c40b9d9 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -149,7 +149,29 @@
}},
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
- .name = "Hauppauge WinTV HVR 900/950",
+ .name = "Hauppauge WinTV HVR 900",
+ .vchannels = 3,
+ .tda9887_conf = TDA9887_PRESENT,
+ .tuner_type = TUNER_XC2028,
+ .has_tuner = 1,
+ .xc2028_type = XC2028_FIRM_MTS,
+ .decoder = EM28XX_TVP5150,
+ .input = {{
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = 0,
+ },{
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = TVP5150_COMPOSITE1,
+ .amux = 1,
+ },{
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = TVP5150_SVIDEO,
+ .amux = 1,
+ }},
+ },
+ [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
+ .name = "Hauppauge WinTV HVR 950",
.vchannels = 3,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
@@ -376,7 +398,7 @@
{ USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
- { USB_DEVICE(0x2040, 0x6513), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
+ { USB_DEVICE(0x2040, 0x6513), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0047), .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
{ },
@@ -404,6 +426,7 @@
switch(dev->model){
case EM2880_BOARD_TERRATEC_PRODIGY_XS:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_TERRATEC_HYBRID_XS:
/* reset through GPIO? */
em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1);
@@ -453,6 +476,7 @@
ctl.fname = XC2028_DEFAULT_FIRMWARE;
ctl.max_len = 64;
+ ctl.type = em28xx_boards[dev->model].xc2028_type;
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
@@ -574,6 +598,7 @@
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
{
struct tveeprom tv;
#ifdef CONFIG_MODULES
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 8d04586..db82b51 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -48,6 +48,7 @@
#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13
#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14
#define EM2800_BOARD_VGEAR_POCKETTV 15
+#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 16
#define UNSET -1
@@ -177,6 +178,7 @@
unsigned int has_msp34xx:1;
enum em28xx_decoder decoder;
+ int xc2028_type;
struct em28xx_input input[MAX_EM28XX_INPUT];
};