ARM: mmp: support sparse irq
Add sparse IRQ support in ARCH_MMP.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 95ad5f9..6cae277 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -510,6 +510,7 @@
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
+ select SPARSE_IRQ
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index f04bae6..4681bed 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -16,6 +16,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -239,6 +240,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = IRQ_BOARD_START,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
@@ -248,6 +250,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = IRQ_BOARD_START,
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index e4312d2..c558425 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -16,6 +16,7 @@
#include <linux/smc91x.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -25,6 +26,8 @@
#include "common.h"
+#define FLINT_NR_IRQS (IRQ_BOARD_START + 48)
+
static unsigned long flint_pin_config[] __initdata = {
/* UART1 */
GPIO45_UART1_RXD,
@@ -116,6 +119,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = FLINT_NR_IRQS,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = flint_init,
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index b379cde..a09d328 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -222,10 +222,8 @@
#define IRQ_GPIO_NUM 192
#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
-/* Board IRQ - 64 by default, increase if not enough */
#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM)
-#define IRQ_BOARD_END (IRQ_BOARD_START + 64)
-#define NR_IRQS (IRQ_BOARD_END)
+#define NR_IRQS (IRQ_BOARD_START)
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 80c3e7a..940ee03 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -18,16 +18,18 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-mmp2.h>
#include <mach/mmp2.h>
-#include <mach/irqs.h>
#include "common.h"
+#define JASPER_NR_IRQS (IRQ_BOARD_START + 48)
+
static unsigned long jasper_pin_config[] __initdata = {
/* UART1 */
GPIO29_UART1_RXD,
@@ -137,6 +139,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = JASPER_NR_IRQS,
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = jasper_init,
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ee65e05..5457113 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -14,6 +14,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -24,6 +25,8 @@
#include "common.h"
+#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 24)
+
static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
GPIO47_UART2_RXD,
@@ -125,6 +128,7 @@
.phys_io = APB_PHYS_BASE,
.io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc,
.map_io = mmp_map_io,
+ .nr_irqs = TTCDKB_NR_IRQS,
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = ttc_dkb_init,