ARM: mx1: don't use deprecated symbol names
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index fc2ddf8..297d172 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,7 +4,6 @@
# Object file lists.
-EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-y += generic.o clock.o devices.o
# Support for CMOS sensor interface
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 6cf2d4a..610b88d 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -596,7 +596,8 @@
clk_enable(&hclk);
clk_enable(&fclk);
- mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
+ mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+ MX1_TIM1_INT);
return 0;
}
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
index 22e866f..13e81e6 100644
--- a/arch/arm/mach-mx1/crm_regs.h
+++ b/arch/arm/mach-mx1/crm_regs.h
@@ -9,8 +9,8 @@
#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
-#define SCM_BASE IO_ADDRESS(SCM_BASE_ADDR)
+#define CCM_BASE MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR)
+#define SCM_BASE MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR)
/* CCM register addresses */
#define CCM_CSCR (CCM_BASE + 0x0)
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index b6be29d..8064f2c 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
@@ -34,20 +35,20 @@
.end = 0x00224010,
.flags = IORESOURCE_MEM,
}, {
- .start = CSI_INT,
- .end = CSI_INT,
+ .start = MX1_CSI_INT,
+ .end = MX1_CSI_INT,
.flags = IORESOURCE_IRQ,
},
};
-static u64 imx_csi_dmamask = 0xffffffffUL;
+static u64 imx_csi_dmamask = DMA_BIT_MASK(32);
struct platform_device imx_csi_device = {
.name = "mx1-camera",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &imx_csi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = imx_csi_resources,
.num_resources = ARRAY_SIZE(imx_csi_resources),
@@ -59,8 +60,8 @@
.end = 0x00217010,
.flags = IORESOURCE_MEM,
}, {
- .start = I2C_INT,
- .end = I2C_INT,
+ .start = MX1_I2C_INT,
+ .end = MX1_I2C_INT,
.flags = IORESOURCE_IRQ,
},
};
@@ -74,21 +75,21 @@
static struct resource imx_uart1_resources[] = {
{
- .start = UART1_BASE_ADDR,
- .end = UART1_BASE_ADDR + 0xD0,
- .flags = IORESOURCE_MEM,
+ .start = MX1_UART1_BASE_ADDR,
+ .end = MX1_UART1_BASE_ADDR + 0xD0,
+ .flags = IORESOURCE_MEM,
}, {
- .start = UART1_MINT_RX,
- .end = UART1_MINT_RX,
- .flags = IORESOURCE_IRQ,
+ .start = MX1_UART1_MINT_RX,
+ .end = MX1_UART1_MINT_RX,
+ .flags = IORESOURCE_IRQ,
}, {
- .start = UART1_MINT_TX,
- .end = UART1_MINT_TX,
- .flags = IORESOURCE_IRQ,
+ .start = MX1_UART1_MINT_TX,
+ .end = MX1_UART1_MINT_TX,
+ .flags = IORESOURCE_IRQ,
}, {
- .start = UART1_MINT_RTS,
- .end = UART1_MINT_RTS,
- .flags = IORESOURCE_IRQ,
+ .start = MX1_UART1_MINT_RTS,
+ .end = MX1_UART1_MINT_RTS,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -101,21 +102,21 @@
static struct resource imx_uart2_resources[] = {
{
- .start = UART2_BASE_ADDR,
- .end = UART2_BASE_ADDR + 0xD0,
- .flags = IORESOURCE_MEM,
+ .start = MX1_UART2_BASE_ADDR,
+ .end = MX1_UART2_BASE_ADDR + 0xD0,
+ .flags = IORESOURCE_MEM,
}, {
- .start = UART2_MINT_RX,
- .end = UART2_MINT_RX,
- .flags = IORESOURCE_IRQ,
+ .start = MX1_UART2_MINT_RX,
+ .end = MX1_UART2_MINT_RX,
+ .flags = IORESOURCE_IRQ,
}, {
- .start = UART2_MINT_TX,
- .end = UART2_MINT_TX,
- .flags = IORESOURCE_IRQ,
+ .start = MX1_UART2_MINT_TX,
+ .end = MX1_UART2_MINT_TX,
+ .flags = IORESOURCE_IRQ,
}, {
- .start = UART2_MINT_RTS,
- .end = UART2_MINT_RTS,
- .flags = IORESOURCE_IRQ,
+ .start = MX1_UART2_MINT_RTS,
+ .end = MX1_UART2_MINT_RTS,
+ .flags = IORESOURCE_IRQ,
},
};
@@ -132,12 +133,12 @@
.end = 0x00204024,
.flags = IORESOURCE_MEM,
}, {
- .start = RTC_INT,
- .end = RTC_INT,
+ .start = MX1_RTC_INT,
+ .end = MX1_RTC_INT,
.flags = IORESOURCE_IRQ,
}, {
- .start = RTC_SAMINT,
- .end = RTC_SAMINT,
+ .start = MX1_RTC_SAMINT,
+ .end = MX1_RTC_SAMINT,
.flags = IORESOURCE_IRQ,
},
};
@@ -155,8 +156,8 @@
.end = 0x00201008,
.flags = IORESOURCE_MEM,
}, {
- .start = WDT_INT,
- .end = WDT_INT,
+ .start = MX1_WDT_INT,
+ .end = MX1_WDT_INT,
.flags = IORESOURCE_IRQ,
},
};
@@ -174,32 +175,32 @@
.end = 0x00212148,
.flags = IORESOURCE_MEM,
}, {
- .start = USBD_INT0,
- .end = USBD_INT0,
+ .start = MX1_USBD_INT0,
+ .end = MX1_USBD_INT0,
.flags = IORESOURCE_IRQ,
}, {
- .start = USBD_INT1,
- .end = USBD_INT1,
+ .start = MX1_USBD_INT1,
+ .end = MX1_USBD_INT1,
.flags = IORESOURCE_IRQ,
}, {
- .start = USBD_INT2,
- .end = USBD_INT2,
+ .start = MX1_USBD_INT2,
+ .end = MX1_USBD_INT2,
.flags = IORESOURCE_IRQ,
}, {
- .start = USBD_INT3,
- .end = USBD_INT3,
+ .start = MX1_USBD_INT3,
+ .end = MX1_USBD_INT3,
.flags = IORESOURCE_IRQ,
}, {
- .start = USBD_INT4,
- .end = USBD_INT4,
+ .start = MX1_USBD_INT4,
+ .end = MX1_USBD_INT4,
.flags = IORESOURCE_IRQ,
}, {
- .start = USBD_INT5,
- .end = USBD_INT5,
+ .start = MX1_USBD_INT5,
+ .end = MX1_USBD_INT5,
.flags = IORESOURCE_IRQ,
}, {
- .start = USBD_INT6,
- .end = USBD_INT6,
+ .start = MX1_USBD_INT6,
+ .end = MX1_USBD_INT6,
.flags = IORESOURCE_IRQ,
},
};
@@ -215,23 +216,23 @@
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
- .irq = GPIO_INT_PORTA,
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+ .irq = MX1_GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
- .irq = GPIO_INT_PORTB,
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+ .irq = MX1_GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
- .irq = GPIO_INT_PORTC,
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+ .irq = MX1_GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
- .irq = GPIO_INT_PORTD,
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+ .irq = MX1_GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7f9fc10..5a745d9 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -31,23 +31,22 @@
static struct map_desc imx_io_desc[] __initdata = {
{
- .virtual = IMX_IO_BASE,
- .pfn = __phys_to_pfn(IMX_IO_PHYS),
- .length = IMX_IO_SIZE,
- .type = MT_DEVICE
+ .virtual = MX1_IO_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
+ .length = MX1_IO_SIZE,
+ .type = MT_DEVICE
}
};
void __init mx1_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX1);
- mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
+ mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
void __init mx1_init_irq(void)
{
- mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+ mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
}
-
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c
index 51f3cfd..27c8222 100644
--- a/arch/arm/mach-mx1/mach-mx1ads.c
+++ b/arch/arm/mach-mx1/mach-mx1ads.c
@@ -75,8 +75,8 @@
};
static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + SZ_32M - 1,
+ .start = MX1_CS0_PHYS,
+ .end = MX1_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
@@ -145,8 +145,8 @@
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .phys_io = MX1_IO_BASE_ADDR,
+ .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
@@ -155,8 +155,8 @@
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .phys_io = MX1_IO_BASE_ADDR,
+ .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
index 7587a7a..7c6bbe8 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -31,8 +31,8 @@
* This scb9328 has a 32MiB flash
*/
static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+ .start = MX1_CS0_PHYS,
+ .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
.flags = IORESOURCE_MEM,
};
@@ -70,13 +70,13 @@
static struct resource dm9000x_resources[] = {
{
.name = "address area",
- .start = IMX_CS5_PHYS,
- .end = IMX_CS5_PHYS + 1,
+ .start = MX1_CS5_PHYS,
+ .end = MX1_CS5_PHYS + 1,
.flags = IORESOURCE_MEM, /* address access */
}, {
.name = "data area",
- .start = IMX_CS5_PHYS + 4,
- .end = IMX_CS5_PHYS + 5,
+ .start = MX1_CS5_PHYS + 4,
+ .end = MX1_CS5_PHYS + 5,
.flags = IORESOURCE_MEM, /* data access */
}, {
.start = IRQ_GPIOC(3),