serial: pch_uart: add console poll support
Implement console poll for pch_uart, this could enable KGDBoC when
on pch-uart console.
Signed-off-by: Liang Li <liang.li@windriver.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 7a6c989..21a7e17 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1493,29 +1493,6 @@
return 0;
}
-static struct uart_ops pch_uart_ops = {
- .tx_empty = pch_uart_tx_empty,
- .set_mctrl = pch_uart_set_mctrl,
- .get_mctrl = pch_uart_get_mctrl,
- .stop_tx = pch_uart_stop_tx,
- .start_tx = pch_uart_start_tx,
- .stop_rx = pch_uart_stop_rx,
- .enable_ms = pch_uart_enable_ms,
- .break_ctl = pch_uart_break_ctl,
- .startup = pch_uart_startup,
- .shutdown = pch_uart_shutdown,
- .set_termios = pch_uart_set_termios,
-/* .pm = pch_uart_pm, Not supported yet */
-/* .set_wake = pch_uart_set_wake, Not supported yet */
- .type = pch_uart_type,
- .release_port = pch_uart_release_port,
- .request_port = pch_uart_request_port,
- .config_port = pch_uart_config_port,
- .verify_port = pch_uart_verify_port
-};
-
-#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
-
/*
* Wait for transmitter & holding register to empty
*/
@@ -1547,6 +1524,84 @@
}
}
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for communicate via uart while
+ * in an interrupt or debug context.
+ */
+static int pch_uart_get_poll_char(struct uart_port *port)
+{
+ struct eg20t_port *priv =
+ container_of(port, struct eg20t_port, port);
+ u8 lsr = ioread8(priv->membase + UART_LSR);
+
+ if (!(lsr & UART_LSR_DR))
+ return NO_POLL_CHAR;
+
+ return ioread8(priv->membase + PCH_UART_RBR);
+}
+
+
+static void pch_uart_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ier;
+ struct eg20t_port *priv =
+ container_of(port, struct eg20t_port, port);
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = ioread8(priv->membase + UART_IER);
+ pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
+
+ wait_for_xmitr(priv, UART_LSR_THRE);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ iowrite8(c, priv->membase + PCH_UART_THR);
+ if (c == 10) {
+ wait_for_xmitr(priv, UART_LSR_THRE);
+ iowrite8(13, priv->membase + PCH_UART_THR);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(priv, BOTH_EMPTY);
+ iowrite8(ier, priv->membase + UART_IER);
+}
+#endif /* CONFIG_CONSOLE_POLL */
+
+static struct uart_ops pch_uart_ops = {
+ .tx_empty = pch_uart_tx_empty,
+ .set_mctrl = pch_uart_set_mctrl,
+ .get_mctrl = pch_uart_get_mctrl,
+ .stop_tx = pch_uart_stop_tx,
+ .start_tx = pch_uart_start_tx,
+ .stop_rx = pch_uart_stop_rx,
+ .enable_ms = pch_uart_enable_ms,
+ .break_ctl = pch_uart_break_ctl,
+ .startup = pch_uart_startup,
+ .shutdown = pch_uart_shutdown,
+ .set_termios = pch_uart_set_termios,
+/* .pm = pch_uart_pm, Not supported yet */
+/* .set_wake = pch_uart_set_wake, Not supported yet */
+ .type = pch_uart_type,
+ .release_port = pch_uart_release_port,
+ .request_port = pch_uart_request_port,
+ .config_port = pch_uart_config_port,
+ .verify_port = pch_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = pch_uart_get_poll_char,
+ .poll_put_char = pch_uart_put_poll_char,
+#endif
+};
+
+#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
+
static void pch_console_putchar(struct uart_port *port, int ch)
{
struct eg20t_port *priv =
@@ -1655,7 +1710,7 @@
#define PCH_CONSOLE (&pch_console)
#else
#define PCH_CONSOLE NULL
-#endif
+#endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */
static struct uart_driver pch_uart_driver = {
.owner = THIS_MODULE,