spi: use generic gpio calls in spi_s3c24xx_gpio
Change the spi_s3c2410 driver to use the generic gpio calls that are now
available.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 256d183..b3ebc1d 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -19,6 +19,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
@@ -27,7 +28,6 @@
#include <asm/dma.h>
#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
#include <plat/regs-spi.h>
#include <mach/spi.h>
@@ -66,7 +66,7 @@
static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
{
- s3c2410_gpio_setpin(spi->pin_cs, pol);
+ gpio_set_value(spi->pin_cs, pol);
}
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
@@ -248,8 +248,13 @@
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
- if (hw->pdata && hw->pdata->gpio_setup)
- hw->pdata->gpio_setup(hw->pdata, 1);
+ if (hw->pdata) {
+ if (hw->set_cs == s3c24xx_spi_gpiocs)
+ gpio_direction_output(hw->pdata->pin_cs, 1);
+
+ if (hw->pdata->gpio_setup)
+ hw->pdata->gpio_setup(hw->pdata, 1);
+ }
}
static int __init s3c24xx_spi_probe(struct platform_device *pdev)
@@ -343,18 +348,27 @@
goto err_no_clk;
}
- s3c24xx_spi_initialsetup(hw);
-
/* setup any gpio we can */
if (!pdata->set_cs) {
- hw->set_cs = s3c24xx_spi_gpiocs;
+ if (pdata->pin_cs < 0) {
+ dev_err(&pdev->dev, "No chipselect pin\n");
+ goto err_register;
+ }
- s3c2410_gpio_setpin(pdata->pin_cs, 1);
- s3c2410_gpio_cfgpin(pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+ err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "Failed to get gpio for cs\n");
+ goto err_register;
+ }
+
+ hw->set_cs = s3c24xx_spi_gpiocs;
+ gpio_direction_output(pdata->pin_cs, 1);
} else
hw->set_cs = pdata->set_cs;
+ s3c24xx_spi_initialsetup(hw);
+
/* register our spi controller */
err = spi_bitbang_start(&hw->bitbang);
@@ -366,6 +380,9 @@
return 0;
err_register:
+ if (hw->set_cs == s3c24xx_spi_gpiocs)
+ gpio_free(pdata->pin_cs);
+
clk_disable(hw->clk);
clk_put(hw->clk);
@@ -401,6 +418,9 @@
free_irq(hw->irq, hw);
iounmap(hw->regs);
+ if (hw->set_cs == s3c24xx_spi_gpiocs)
+ gpio_free(hw->pdata->pin_cs);
+
release_resource(hw->ioarea);
kfree(hw->ioarea);