mac80211/drivers: rewrite the rate control API
So after the previous changes we were still unhappy with how
convoluted the API is and decided to make things simpler for
everybody. This completely changes the rate control API, now
taking into account 802.11n with MCS rates and more control,
most drivers don't support that though.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 9a1e0c5..b96ebfe 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -341,15 +341,14 @@
pci_unmap_single(priv->pdev, info->mapping,
info->skb->len, PCI_DMA_TODEVICE);
- memset(&txi->status, 0, sizeof(txi->status));
+ ieee80211_tx_info_clear_status(txi);
+
skb_pull(skb, sizeof(struct adm8211_tx_hdr));
memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen);
- if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) {
- if (status & TDES0_STATUS_ES)
- txi->status.excessive_retries = 1;
- else
- txi->flags |= IEEE80211_TX_STAT_ACK;
- }
+ if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ !(status & TDES0_STATUS_ES))
+ txi->flags |= IEEE80211_TX_STAT_ACK;
+
ieee80211_tx_status_irqsafe(dev, skb);
info->skb = NULL;
@@ -1691,8 +1690,10 @@
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info);
+ u8 rc_flags;
- short_preamble = !!(txrate->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE);
+ rc_flags = info->control.rates[0].flags;
+ short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
plcp_signal = txrate->bitrate;
hdr = (struct ieee80211_hdr *)skb->data;
@@ -1724,10 +1725,10 @@
if (short_preamble)
txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE);
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS);
- txhdr->retry_limit = info->control.retry_limit;
+ txhdr->retry_limit = info->control.rates[0].count;
adm8211_tx_raw(dev, skb, plcp_signal, hdrlen);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 44401f6..3773d98 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -541,8 +541,8 @@
/* set up multi-rate retry capabilities */
if (sc->ah->ah_version == AR5K_AR5212) {
- hw->max_altrates = 3;
- hw->max_altrate_tries = 11;
+ hw->max_rates = 4;
+ hw->max_rate_tries = 11;
}
/* Finish private driver data initialization */
@@ -1181,7 +1181,7 @@
ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
(sc->power_level * 2),
ieee80211_get_tx_rate(sc->hw, info)->hw_value,
- info->control.retry_limit, keyidx, 0, flags, 0, 0);
+ info->control.rates[0].count, keyidx, 0, flags, 0, 0);
if (ret)
goto err_unmap;
@@ -1193,7 +1193,7 @@
break;
mrr_rate[i] = rate->hw_value;
- mrr_tries[i] = info->control.retries[i].limit;
+ mrr_tries[i] = info->control.rates[i + 1].count;
}
ah->ah_setup_mrr_tx_desc(ah, ds,
@@ -1849,30 +1849,26 @@
pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
PCI_DMA_TODEVICE);
- memset(&info->status, 0, sizeof(info->status));
- info->tx_rate_idx = ath5k_hw_to_driver_rix(sc,
- ts.ts_rate[ts.ts_final_idx]);
- info->status.retry_count = ts.ts_longretry;
-
+ ieee80211_tx_info_clear_status(info);
for (i = 0; i < 4; i++) {
- struct ieee80211_tx_altrate *r =
- &info->status.retries[i];
+ struct ieee80211_tx_rate *r =
+ &info->status.rates[i];
if (ts.ts_rate[i]) {
- r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
- r->limit = ts.ts_retry[i];
+ r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
+ r->count = ts.ts_retry[i];
} else {
- r->rate_idx = -1;
- r->limit = 0;
+ r->idx = -1;
+ r->count = 0;
}
}
- info->status.excessive_retries = 0;
+ /* count the successful attempt as well */
+ info->status.rates[ts.ts_final_idx].count++;
+
if (unlikely(ts.ts_status)) {
sc->ll_stats.dot11ACKFailureCount++;
- if (ts.ts_status & AR5K_TXERR_XRETRY)
- info->status.excessive_retries = 1;
- else if (ts.ts_status & AR5K_TXERR_FILT)
+ if (ts.ts_status & AR5K_TXERR_FILT)
info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
} else {
info->flags |= IEEE80211_TX_STAT_ACK;
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 32acaf7..a7656a3 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -457,12 +457,13 @@
DPRINTF(sc, ATH_DBG_XMIT,
"%s: TX complete: skb: %p\n", __func__, skb);
+ ieee80211_tx_info_clear_status(tx_info);
if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK ||
tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
- /* free driver's private data area of tx_info */
- if (tx_info->driver_data[0] != NULL)
- kfree(tx_info->driver_data[0]);
- tx_info->driver_data[0] = NULL;
+ /* free driver's private data area of tx_info, XXX: HACK! */
+ if (tx_info->control.vif != NULL)
+ kfree(tx_info->control.vif);
+ tx_info->control.vif = NULL;
}
if (tx_status->flags & ATH_TX_BAR) {
@@ -470,17 +471,12 @@
tx_status->flags &= ~ATH_TX_BAR;
}
- if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
- if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- /* Frame was not ACKed, but an ACK was expected */
- tx_info->status.excessive_retries = 1;
- }
- } else {
+ if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) {
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
}
- tx_info->status.retry_count = tx_status->retries;
+ tx_info->status.rates[0].count = tx_status->retries + 1;
ieee80211_tx_status(hw, skb);
if (an)
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 9b25260..6afafed 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -1864,24 +1864,21 @@
hdr = (struct ieee80211_hdr *)skb->data;
fc = hdr->frame_control;
- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+ /* XXX: UGLY HACK!! */
+ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
spin_lock_bh(&sc->node_lock);
an = ath_node_find(sc, hdr->addr1);
spin_unlock_bh(&sc->node_lock);
- if (!an || !priv_sta || !ieee80211_is_data(fc)) {
- if (tx_info->driver_data[0] != NULL) {
- kfree(tx_info->driver_data[0]);
- tx_info->driver_data[0] = NULL;
- }
+ if (tx_info_priv == NULL)
return;
- }
- if (tx_info->driver_data[0] != NULL) {
+
+ if (an && priv_sta && ieee80211_is_data(fc))
ath_rate_tx_complete(sc, an, priv_sta, tx_info_priv);
- kfree(tx_info->driver_data[0]);
- tx_info->driver_data[0] = NULL;
- }
+
+ kfree(tx_info_priv);
+ tx_info->control.vif = NULL;
}
static void ath_tx_aggr_resp(struct ath_softc *sc,
@@ -1927,10 +1924,11 @@
}
}
-static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb, struct rate_selection *sel)
+static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc)
{
+ struct ieee80211_supported_band *sband = txrc->sband;
+ struct sk_buff *skb = txrc->skb;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ath_softc *sc = priv;
struct ieee80211_hw *hw = sc->hw;
@@ -1945,17 +1943,17 @@
DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__);
- /* allocate driver private area of tx_info */
- tx_info->driver_data[0] = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC);
- ASSERT(tx_info->driver_data[0] != NULL);
- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+ /* allocate driver private area of tx_info, XXX: UGLY HACK! */
+ tx_info->control.vif = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC);
+ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
+ ASSERT(tx_info_priv != NULL);
lowest_idx = rate_lowest_index(sband, sta);
tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10;
/* lowest rate for management and multicast/broadcast frames */
if (!ieee80211_is_data(fc) ||
is_multicast_ether_addr(hdr->addr1) || !sta) {
- sel->rate_idx = lowest_idx;
+ tx_info->control.rates[0].idx = lowest_idx;
return;
}
@@ -1966,8 +1964,10 @@
tx_info_priv->rcs,
&is_probe,
false);
+#if 0
if (is_probe)
sel->probe_idx = ath_rc_priv->tx_ratectrl.probe_rate;
+#endif
/* Ratecontrol sometimes returns invalid rate index */
if (tx_info_priv->rcs[0].rix != 0xff)
@@ -1975,7 +1975,7 @@
else
tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix;
- sel->rate_idx = tx_info_priv->rcs[0].rix;
+ tx_info->control.rates[0].idx = tx_info_priv->rcs[0].rix;
/* Check if aggregation has to be enabled for this tid */
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index ba818cc..9fa3954 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -168,7 +168,9 @@
hdr = (struct ieee80211_hdr *)skb->data;
fc = hdr->frame_control;
- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+ /* XXX: HACK! */
+ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) {
txctl->use_minrate = 1;
@@ -288,13 +290,16 @@
if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
txctl->flags |= ATH9K_TXDESC_NOACK;
- if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+
+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
txctl->flags |= ATH9K_TXDESC_RTSENA;
/*
* Setup for rate calculations.
*/
- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+ /* XXX: HACK! */
+ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
rcs = tx_info_priv->rcs;
if (ieee80211_is_data(fc) && !txctl->use_minrate) {
@@ -855,7 +860,9 @@
skb = (struct sk_buff *)bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+
+ /* XXX: HACK! */
+ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
/* update starting sequence number for subsequent ADDBA request */
@@ -1249,8 +1256,9 @@
}
skb = bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
- tx_info_priv = (struct ath_tx_info_priv *)
- tx_info->driver_data[0];
+
+ /* XXX: HACK! */
+ tx_info_priv = (struct ath_tx_info_priv *) tx_info->control.vif;
if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT)
tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 &&
@@ -1431,7 +1439,8 @@
skb = (struct sk_buff *)bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+ /* XXX: HACK! */
+ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
/* Add sub-frame to BAW */
@@ -1466,7 +1475,7 @@
skb = (struct sk_buff *)bf->bf_mpdu;
tx_info = IEEE80211_SKB_CB(skb);
tx_info_priv = (struct ath_tx_info_priv *)
- tx_info->driver_data[0];
+ tx_info->control.vif; /* XXX: HACK! */
memcpy(bf->bf_rcs,
tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
@@ -1927,7 +1936,8 @@
bf->bf_flags = txctl->flags;
bf->bf_keytype = txctl->keytype;
- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
+ /* XXX: HACK! */
+ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
rcs = tx_info_priv->rcs;
bf->bf_rcs[0] = rcs[0];
bf->bf_rcs[1] = rcs[1];
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 098f886..6d65a02 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1387,13 +1387,11 @@
info = IEEE80211_SKB_CB(meta->skb);
- memset(&info->status, 0, sizeof(info->status));
-
/*
* Call back to inform the ieee80211 subsystem about
* the status of the transmission.
*/
- frame_succeed = b43_fill_txstatus_report(info, status);
+ frame_succeed = b43_fill_txstatus_report(dev, info, status);
#ifdef CONFIG_B43_DEBUG
if (frame_succeed)
ring->nr_succeed_tx_packets++;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 9aeeb65..2a599fb 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4555,7 +4555,7 @@
BIT(NL80211_IFTYPE_ADHOC);
hw->queues = b43_modparam_qos ? 4 : 1;
- hw->max_altrates = 1;
+ hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 40159126..1036bef 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -587,9 +587,8 @@
spin_lock(&q->lock); /* IRQs are already disabled. */
info = IEEE80211_SKB_CB(pack->skb);
- memset(&info->status, 0, sizeof(info->status));
- b43_fill_txstatus_report(info, status);
+ b43_fill_txstatus_report(dev, info, status);
total_len = pack->skb->len + b43_txhdr_size(dev);
total_len = roundup(total_len, 4);
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 2fabcf8..adba89b 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -185,7 +185,7 @@
u8 *_txhdr,
const unsigned char *fragment_data,
unsigned int fragment_len,
- const struct ieee80211_tx_info *info,
+ struct ieee80211_tx_info *info,
u16 cookie)
{
struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr;
@@ -202,6 +202,7 @@
u16 phy_ctl = 0;
u8 extra_ft = 0;
struct ieee80211_rate *txrate;
+ struct ieee80211_tx_rate *rates;
memset(txhdr, 0, sizeof(*txhdr));
@@ -291,7 +292,7 @@
phy_ctl |= B43_TXH_PHY_ENC_OFDM;
else
phy_ctl |= B43_TXH_PHY_ENC_CCK;
- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
phy_ctl |= B43_TXH_PHY_SHORTPRMBL;
switch (b43_ieee80211_antenna_sanitize(dev, info->antenna_sel_tx)) {
@@ -314,6 +315,7 @@
B43_WARN_ON(1);
}
+ rates = info->control.rates;
/* MAC control */
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
mac_ctl |= B43_TXH_MAC_ACK;
@@ -324,12 +326,22 @@
mac_ctl |= B43_TXH_MAC_STMSDU;
if (phy->type == B43_PHYTYPE_A)
mac_ctl |= B43_TXH_MAC_5GHZ;
- if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
+
+ /* Overwrite rates[0].count to make the retry calculation
+ * in the tx status easier. need the actual retry limit to
+ * detect whether the fallback rate was used.
+ */
+ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) {
+ rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count;
mac_ctl |= B43_TXH_MAC_LONGFRAME;
+ } else {
+ rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count;
+ }
/* Generate the RTS or CTS-to-self frame */
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
+ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) {
unsigned int len;
struct ieee80211_hdr *hdr;
int rts_rate, rts_rate_fb;
@@ -344,7 +356,7 @@
rts_rate_fb = b43_calc_fallback_rate(rts_rate);
rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb);
- if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
struct ieee80211_cts *cts;
if (b43_is_old_txhdr_format(dev)) {
@@ -687,10 +699,18 @@
/* Fill out the mac80211 TXstatus report based on the b43-specific
* txstatus report data. This returns a boolean whether the frame was
* successfully transmitted. */
-bool b43_fill_txstatus_report(struct ieee80211_tx_info *report,
+bool b43_fill_txstatus_report(struct b43_wldev *dev,
+ struct ieee80211_tx_info *report,
const struct b43_txstatus *status)
{
bool frame_success = 1;
+ int retry_limit;
+
+ /* preserve the confiured retry limit before clearing the status
+ * The xmit function has overwritten the rc's value with the actual
+ * retry limit done by the hardware */
+ retry_limit = report->status.rates[0].count;
+ ieee80211_tx_info_clear_status(report);
if (status->acked) {
/* The frame was ACKed. */
@@ -700,14 +720,32 @@
if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) {
/* ...but we expected an ACK. */
frame_success = 0;
- report->status.excessive_retries = 1;
}
}
if (status->frame_count == 0) {
/* The frame was not transmitted at all. */
- report->status.retry_count = 0;
- } else
- report->status.retry_count = status->frame_count - 1;
+ report->status.rates[0].count = 0;
+ } else if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) {
+ /*
+ * If the short retries (RTS, not data frame) have exceeded
+ * the limit, the hw will not have tried the selected rate,
+ * but will have used the fallback rate instead.
+ * Don't let the rate control count attempts for the selected
+ * rate in this case, otherwise the statistics will be off.
+ */
+ report->status.rates[0].count = 0;
+ report->status.rates[1].count = status->frame_count;
+ } else {
+ if (status->frame_count > retry_limit) {
+ report->status.rates[0].count = retry_limit;
+ report->status.rates[1].count = status->frame_count -
+ retry_limit;
+
+ } else {
+ report->status.rates[0].count = status->frame_count;
+ report->status.rates[1].idx = -1;
+ }
+ }
return frame_success;
}
diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h
index 0215faf..4fb2a19 100644
--- a/drivers/net/wireless/b43/xmit.h
+++ b/drivers/net/wireless/b43/xmit.h
@@ -178,7 +178,7 @@
u8 * txhdr,
const unsigned char *fragment_data,
unsigned int fragment_len,
- const struct ieee80211_tx_info *txctl, u16 cookie);
+ struct ieee80211_tx_info *txctl, u16 cookie);
/* Transmit Status */
struct b43_txstatus {
@@ -294,7 +294,8 @@
void b43_handle_txstatus(struct b43_wldev *dev,
const struct b43_txstatus *status);
-bool b43_fill_txstatus_report(struct ieee80211_tx_info *report,
+bool b43_fill_txstatus_report(struct b43_wldev *dev,
+ struct ieee80211_tx_info *report,
const struct b43_txstatus *status);
void b43_tx_suspend(struct b43_wldev *dev);
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index fb6819e..308c264 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -1411,6 +1411,7 @@
struct b43legacy_dmaring *ring;
struct b43legacy_dmadesc_generic *desc;
struct b43legacy_dmadesc_meta *meta;
+ int retry_limit;
int slot;
ring = parse_cookie(dev, status->cookie, &slot);
@@ -1437,25 +1438,42 @@
struct ieee80211_tx_info *info;
BUG_ON(!meta->skb);
info = IEEE80211_SKB_CB(meta->skb);
+
+ /* preserve the confiured retry limit before clearing the status
+ * The xmit function has overwritten the rc's value with the actual
+ * retry limit done by the hardware */
+ retry_limit = info->status.rates[0].count;
+ ieee80211_tx_info_clear_status(info);
+
+ if (status->acked)
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) {
+ /*
+ * If the short retries (RTS, not data frame) have exceeded
+ * the limit, the hw will not have tried the selected rate,
+ * but will have used the fallback rate instead.
+ * Don't let the rate control count attempts for the selected
+ * rate in this case, otherwise the statistics will be off.
+ */
+ info->status.rates[0].count = 0;
+ info->status.rates[1].count = status->frame_count;
+ } else {
+ if (status->frame_count > retry_limit) {
+ info->status.rates[0].count = retry_limit;
+ info->status.rates[1].count = status->frame_count -
+ retry_limit;
+
+ } else {
+ info->status.rates[0].count = status->frame_count;
+ info->status.rates[1].idx = -1;
+ }
+ }
+
/* Call back to inform the ieee80211 subsystem about the
* status of the transmission.
* Some fields of txstat are already filled in dma_tx().
*/
-
- memset(&info->status, 0, sizeof(info->status));
-
- if (status->acked) {
- info->flags |= IEEE80211_TX_STAT_ACK;
- } else {
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
- info->status.excessive_retries = 1;
- }
- if (status->frame_count == 0) {
- /* The frame was not transmitted at all. */
- info->status.retry_count = 0;
- } else
- info->status.retry_count = status->frame_count
- - 1;
ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb);
/* skb is freed by ieee80211_tx_status_irqsafe() */
meta->skb = NULL;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 78e4636..9edbdf9 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3682,7 +3682,7 @@
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_ADHOC);
hw->queues = 1; /* FIXME: hardware has more queues */
- hw->max_altrates = 1;
+ hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c
index a86c764..746d536 100644
--- a/drivers/net/wireless/b43legacy/pio.c
+++ b/drivers/net/wireless/b43legacy/pio.c
@@ -491,6 +491,7 @@
struct b43legacy_pioqueue *queue;
struct b43legacy_pio_txpacket *packet;
struct ieee80211_tx_info *info;
+ int retry_limit;
queue = parse_cookie(dev, status->cookie, &packet);
B43legacy_WARN_ON(!queue);
@@ -503,11 +504,37 @@
sizeof(struct b43legacy_txhdr_fw3));
info = IEEE80211_SKB_CB(packet->skb);
- memset(&info->status, 0, sizeof(info->status));
+
+ /* preserve the confiured retry limit before clearing the status
+ * The xmit function has overwritten the rc's value with the actual
+ * retry limit done by the hardware */
+ retry_limit = info->status.rates[0].count;
+ ieee80211_tx_info_clear_status(info);
if (status->acked)
info->flags |= IEEE80211_TX_STAT_ACK;
- info->status.retry_count = status->frame_count - 1;
+
+ if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) {
+ /*
+ * If the short retries (RTS, not data frame) have exceeded
+ * the limit, the hw will not have tried the selected rate,
+ * but will have used the fallback rate instead.
+ * Don't let the rate control count attempts for the selected
+ * rate in this case, otherwise the statistics will be off.
+ */
+ info->status.rates[0].count = 0;
+ info->status.rates[1].count = status->frame_count;
+ } else {
+ if (status->frame_count > retry_limit) {
+ info->status.rates[0].count = retry_limit;
+ info->status.rates[1].count = status->frame_count -
+ retry_limit;
+
+ } else {
+ info->status.rates[0].count = status->frame_count;
+ info->status.rates[1].idx = -1;
+ }
+ }
ieee80211_tx_status_irqsafe(dev->wl->hw, packet->skb);
packet->skb = NULL;
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 65e8337..12fca99 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -188,7 +188,7 @@
struct b43legacy_txhdr_fw3 *txhdr,
const unsigned char *fragment_data,
unsigned int fragment_len,
- const struct ieee80211_tx_info *info,
+ struct ieee80211_tx_info *info,
u16 cookie)
{
const struct ieee80211_hdr *wlhdr;
@@ -201,6 +201,7 @@
u32 mac_ctl = 0;
u16 phy_ctl = 0;
struct ieee80211_rate *tx_rate;
+ struct ieee80211_tx_rate *rates;
wlhdr = (const struct ieee80211_hdr *)fragment_data;
@@ -274,7 +275,7 @@
/* PHY TX Control word */
if (rate_ofdm)
phy_ctl |= B43legacy_TX4_PHY_OFDM;
- if (dev->short_preamble)
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL;
switch (info->antenna_sel_tx) {
case 0:
@@ -291,6 +292,7 @@
}
/* MAC control */
+ rates = info->control.rates;
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
mac_ctl |= B43legacy_TX4_MAC_ACK;
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
@@ -299,12 +301,22 @@
mac_ctl |= B43legacy_TX4_MAC_STMSDU;
if (rate_fb_ofdm)
mac_ctl |= B43legacy_TX4_MAC_FALLBACKOFDM;
- if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
+
+ /* Overwrite rates[0].count to make the retry calculation
+ * in the tx status easier. need the actual retry limit to
+ * detect whether the fallback rate was used.
+ */
+ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) {
+ rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count;
mac_ctl |= B43legacy_TX4_MAC_LONGFRAME;
+ } else {
+ rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count;
+ }
/* Generate the RTS or CTS-to-self frame */
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
+ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) {
unsigned int len;
struct ieee80211_hdr *hdr;
int rts_rate;
@@ -319,7 +331,7 @@
if (rts_rate_fb_ofdm)
mac_ctl |= B43legacy_TX4_MAC_CTSFALLBACKOFDM;
- if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
ieee80211_ctstoself_get(dev->wl->hw,
info->control.vif,
fragment_data,
@@ -362,7 +374,7 @@
u8 *txhdr,
const unsigned char *fragment_data,
unsigned int fragment_len,
- const struct ieee80211_tx_info *info,
+ struct ieee80211_tx_info *info,
u16 cookie)
{
return generate_txhdr_fw3(dev, (struct b43legacy_txhdr_fw3 *)txhdr,
diff --git a/drivers/net/wireless/b43legacy/xmit.h b/drivers/net/wireless/b43legacy/xmit.h
index e56777e0f..62e09d0 100644
--- a/drivers/net/wireless/b43legacy/xmit.h
+++ b/drivers/net/wireless/b43legacy/xmit.h
@@ -80,7 +80,7 @@
u8 *txhdr,
const unsigned char *fragment_data,
unsigned int fragment_len,
- const struct ieee80211_tx_info *info,
+ struct ieee80211_tx_info *info,
u16 cookie);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index c25daec..f440ed0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -422,34 +422,6 @@
}
-/*
- * get ieee prev rate from rate scale table.
- * for A and B mode we need to overright prev
- * value
- */
-static int rs_adjust_next_rate(struct iwl3945_priv *priv, int rate)
-{
- int next_rate = iwl3945_get_prev_ieee_rate(rate);
-
- switch (priv->band) {
- case IEEE80211_BAND_5GHZ:
- if (rate == IWL_RATE_12M_INDEX)
- next_rate = IWL_RATE_9M_INDEX;
- else if (rate == IWL_RATE_6M_INDEX)
- next_rate = IWL_RATE_6M_INDEX;
- break;
-/* XXX cannot be invoked in current mac80211 so not a regression
- case MODE_IEEE80211B:
- if (rate == IWL_RATE_11M_INDEX_TABLE)
- next_rate = IWL_RATE_5M_INDEX_TABLE;
- break;
- */
- default:
- break;
- }
-
- return next_rate;
-}
/**
* rs_tx_status - Update rate control values based on Tx results
*
@@ -460,17 +432,21 @@
struct ieee80211_sta *sta, void *priv_sta,
struct sk_buff *skb)
{
- u8 retries, current_count;
+ u8 retries = 0, current_count;
int scale_rate_index, first_index, last_index;
unsigned long flags;
struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_rate;
struct iwl3945_rs_sta *rs_sta = priv_sta;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ int i;
IWL_DEBUG_RATE("enter\n");
- retries = info->status.retry_count;
- first_index = sband->bitrates[info->tx_rate_idx].hw_value;
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
+ retries += info->status.rates[i].count;
+ retries--;
+
+ first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
if ((first_index < 0) || (first_index >= IWL_RATE_COUNT)) {
IWL_DEBUG_RATE("leave: Rate out of bounds: %d\n", first_index);
return;
@@ -502,7 +478,7 @@
last_index = scale_rate_index;
} else {
current_count = priv->retry_rate;
- last_index = rs_adjust_next_rate(priv,
+ last_index = iwl3945_rs_next_rate(priv,
scale_rate_index);
}
@@ -518,7 +494,7 @@
if (retries)
scale_rate_index =
- rs_adjust_next_rate(priv, scale_rate_index);
+ iwl3945_rs_next_rate(priv, scale_rate_index);
}
@@ -630,10 +606,11 @@
* rate table and must reference the driver allocated rate table
*
*/
-static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb, struct rate_selection *sel)
+static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
+ void *priv_sta, struct ieee80211_tx_rate_control *txrc)
{
+ struct ieee80211_supported_band *sband = txrc->sband;
+ struct sk_buff *skb = txrc->skb;
u8 low = IWL_RATE_INVALID;
u8 high = IWL_RATE_INVALID;
u16 high_low;
@@ -649,6 +626,7 @@
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
u16 fc, rate_mask;
struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
IWL_DEBUG_RATE("enter\n");
@@ -659,7 +637,7 @@
is_multicast_ether_addr(hdr->addr1) ||
!sta || !priv_sta) {
IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
- sel->rate_idx = rate_lowest_index(sband, sta);
+ info->control.rates[0].idx = rate_lowest_index(sband, sta);
return;
}
@@ -792,9 +770,10 @@
rs_sta->last_txrate_idx = index;
if (sband->band == IEEE80211_BAND_5GHZ)
- sel->rate_idx = rs_sta->last_txrate_idx - IWL_FIRST_OFDM_RATE;
+ info->control.rates[0].idx = rs_sta->last_txrate_idx -
+ IWL_FIRST_OFDM_RATE;
else
- sel->rate_idx = rs_sta->last_txrate_idx;
+ info->control.rates[0].idx = rs_sta->last_txrate_idx;
IWL_DEBUG_RATE("leave: %d\n", index);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 8a00245..7afafb6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -261,6 +261,35 @@
}
#endif
+/*
+ * get ieee prev rate from rate scale table.
+ * for A and B mode we need to overright prev
+ * value
+ */
+int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate)
+{
+ int next_rate = iwl3945_get_prev_ieee_rate(rate);
+
+ switch (priv->band) {
+ case IEEE80211_BAND_5GHZ:
+ if (rate == IWL_RATE_12M_INDEX)
+ next_rate = IWL_RATE_9M_INDEX;
+ else if (rate == IWL_RATE_6M_INDEX)
+ next_rate = IWL_RATE_6M_INDEX;
+ break;
+/* XXX cannot be invoked in current mac80211 so not a regression
+ case MODE_IEEE80211B:
+ if (rate == IWL_RATE_11M_INDEX_TABLE)
+ next_rate = IWL_RATE_5M_INDEX_TABLE;
+ break;
+ */
+ default:
+ break;
+ }
+
+ return next_rate;
+}
+
/**
* iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
@@ -308,6 +337,7 @@
struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
u32 status = le32_to_cpu(tx_resp->status);
int rate_idx;
+ int fail, i;
if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) {
IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
@@ -318,9 +348,36 @@
}
info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
- memset(&info->status, 0, sizeof(info->status));
+ ieee80211_tx_info_clear_status(info);
- info->status.retry_count = tx_resp->failure_frame;
+ /* Fill the MRR chain with some info about on-chip retransmissions */
+ rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
+ if (info->band == IEEE80211_BAND_5GHZ)
+ rate_idx -= IWL_FIRST_OFDM_RATE;
+
+ fail = tx_resp->failure_frame;
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ int next = iwl3945_rs_next_rate(priv, rate_idx);
+
+ info->status.rates[i].idx = rate_idx;
+
+ /*
+ * Put remaining into the last count as best approximation
+ * of saying exactly what the hardware would have done...
+ */
+ if ((rate_idx == next) || (i == IEEE80211_TX_MAX_RATES - 1)) {
+ info->status.rates[i].count = fail;
+ break;
+ }
+
+ info->status.rates[i].count = priv->retry_rate;
+ fail -= priv->retry_rate;
+ rate_idx = next;
+ if (fail <= 0)
+ break;
+ }
+ info->status.rates[i].count++; /* add final attempt */
+
/* tx_status->rts_retry_count = tx_resp->failure_rts; */
info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
IEEE80211_TX_STAT_ACK : 0;
@@ -329,10 +386,6 @@
txq_id, iwl3945_get_tx_fail_reason(status), status,
tx_resp->rate, tx_resp->failure_frame);
- rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
- if (info->band == IEEE80211_BAND_5GHZ)
- rate_idx -= IWL_FIRST_OFDM_RATE;
- info->tx_rate_idx = rate_idx;
IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
iwl3945_tx_queue_reclaim(priv, txq_id, index);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index bdd3247..592c595 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -954,6 +954,8 @@
extern const struct iwl3945_channel_info *iwl3945_get_channel_info(
const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel);
+extern int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate);
+
/* Requires full declaration of iwl3945_priv before including */
#include "iwl-3945-io.h"
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 9838de5..222c2baa9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -619,10 +619,10 @@
static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
__le32 *tx_flags)
{
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
*tx_flags |= TX_CMD_FLG_RTS_MSK;
*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
*tx_flags |= TX_CMD_FLG_CTS_MSK;
}
@@ -2070,7 +2070,7 @@
agg->frame_count, agg->start_idx, idx);
info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
- info->status.retry_count = tx_resp->failure_frame;
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags &= ~IEEE80211_TX_CTL_AMPDU;
info->flags |= iwl_is_tx_success(status)?
IEEE80211_TX_STAT_ACK : 0;
@@ -2227,7 +2227,7 @@
iwl_txq_check_empty(priv, sta_id, tid, txq_id);
}
} else {
- info->status.retry_count = tx_resp->failure_frame;
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags |=
iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0;
iwl_hwrate_to_tx_control(priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 56a3f0c..d5282fa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -390,8 +390,8 @@
static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
__le32 *tx_flags)
{
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
+ if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
*tx_flags |= TX_CMD_FLG_RTS_CTS_MSK;
else
*tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK;
@@ -1154,7 +1154,7 @@
agg->frame_count, agg->start_idx, idx);
info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
- info->status.retry_count = tx_resp->failure_frame;
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags &= ~IEEE80211_TX_CTL_AMPDU;
info->flags |= iwl_is_tx_success(status)?
IEEE80211_TX_STAT_ACK : 0;
@@ -1307,7 +1307,7 @@
iwl_txq_check_empty(priv, sta_id, tid, txq_id);
}
} else {
- info->status.retry_count = tx_resp->failure_frame;
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags =
iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0;
iwl_hwrate_to_tx_control(priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index e10e0ca..f685e5d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -798,7 +798,7 @@
!(info->flags & IEEE80211_TX_STAT_AMPDU))
return;
- retries = info->status.retry_count;
+ retries = info->status.rates[0].count - 1;
if (retries > 15)
retries = 15;
@@ -830,20 +830,15 @@
if (priv->band == IEEE80211_BAND_5GHZ)
rs_index -= IWL_FIRST_OFDM_RATE;
- if ((info->tx_rate_idx < 0) ||
- (tbl_type.is_SGI ^
- !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) ||
- (tbl_type.is_fat ^
- !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) ||
- (tbl_type.is_dup ^
- !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) ||
- (tbl_type.ant_type ^ info->antenna_sel_tx) ||
- (!!(tx_rate & RATE_MCS_HT_MSK) ^
- !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) ||
- (!!(tx_rate & RATE_MCS_GF_MSK) ^
- !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) ||
+ if ((info->status.rates[0].idx < 0) ||
+ (tbl_type.is_SGI != !!(info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)) ||
+ (tbl_type.is_fat != !!(info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
+ (tbl_type.is_dup != !!(info->status.rates[0].flags & IEEE80211_TX_RC_DUP_DATA)) ||
+ (tbl_type.ant_type != info->antenna_sel_tx) ||
+ (!!(tx_rate & RATE_MCS_HT_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) ||
+ (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
(hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
- hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) {
+ hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) {
IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
goto out;
}
@@ -2098,15 +2093,17 @@
return;
}
-static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb, struct rate_selection *sel)
+static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc)
{
int i;
+ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_supported_band *sband = txrc->sband;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
struct ieee80211_conf *conf = &priv->hw->conf;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
__le16 fc;
struct iwl_lq_sta *lq_sta;
@@ -2117,7 +2114,7 @@
fc = hdr->frame_control;
if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
!sta || !priv_sta) {
- sel->rate_idx = rate_lowest_index(sband, sta);
+ info->control.rates[0].idx = rate_lowest_index(sband, sta);
return;
}
@@ -2143,13 +2140,13 @@
}
if ((i < 0) || (i > IWL_RATE_COUNT)) {
- sel->rate_idx = rate_lowest_index(sband, sta);
+ info->control.rates[0].idx = rate_lowest_index(sband, sta);
return;
}
if (sband->band == IEEE80211_BAND_5GHZ)
i -= IWL_FIRST_OFDM_RATE;
- sel->rate_idx = i;
+ info->control.rates[0].idx = i;
}
static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 10f5a0a..2c4162e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -88,26 +88,27 @@
* translate ucode response to mac80211 tx status control values
*/
void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
- struct ieee80211_tx_info *control)
+ struct ieee80211_tx_info *info)
{
int rate_index;
+ struct ieee80211_tx_rate *r = &info->control.rates[0];
- control->antenna_sel_tx =
+ info->antenna_sel_tx =
((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
if (rate_n_flags & RATE_MCS_HT_MSK)
- control->flags |= IEEE80211_TX_CTL_OFDM_HT;
+ r->flags |= IEEE80211_TX_RC_MCS;
if (rate_n_flags & RATE_MCS_GF_MSK)
- control->flags |= IEEE80211_TX_CTL_GREEN_FIELD;
+ r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
if (rate_n_flags & RATE_MCS_FAT_MSK)
- control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH;
+ r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
if (rate_n_flags & RATE_MCS_DUP_MSK)
- control->flags |= IEEE80211_TX_CTL_DUP_DATA;
+ r->flags |= IEEE80211_TX_RC_DUP_DATA;
if (rate_n_flags & RATE_MCS_SGI_MSK)
- control->flags |= IEEE80211_TX_CTL_SHORT_GI;
+ r->flags |= IEEE80211_TX_RC_SHORT_GI;
rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
- if (control->band == IEEE80211_BAND_5GHZ)
+ if (info->band == IEEE80211_BAND_5GHZ)
rate_index -= IWL_FIRST_OFDM_RATE;
- control->tx_rate_idx = rate_index;
+ r->idx = rate_index;
}
EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index b1464c7..2cd33b4 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2395,6 +2395,7 @@
{
__le16 fc = hdr->frame_control;
__le32 tx_flags = cmd->cmd.tx.tx_flags;
+ u8 rc_flags = info->control.rates[0].flags;
cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
@@ -2421,10 +2422,10 @@
tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
}
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
tx_flags |= TX_CMD_FLG_RTS_MSK;
tx_flags &= ~TX_CMD_FLG_CTS_MSK;
- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
tx_flags &= ~TX_CMD_FLG_RTS_MSK;
tx_flags |= TX_CMD_FLG_CTS_MSK;
}
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 241ddcf..d1fc305 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -592,14 +592,14 @@
void lbtf_send_tx_feedback(struct lbtf_private *priv, u8 retrycnt, u8 fail)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);
- memset(&info->status, 0, sizeof(info->status));
+
+ ieee80211_tx_info_clear_status(info);
/*
* Commented out, otherwise we never go beyond 1Mbit/s using mac80211
* default pid rc algorithm.
*
* info->status.retry_count = MRVL_DEFAULT_RETRIES - retrycnt;
*/
- info->status.excessive_retries = fail ? 1 : 0;
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && !fail)
info->flags |= IEEE80211_TX_STAT_ACK;
skb_pull(priv->tx_skb, sizeof(struct txpd));
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index e2aeef8..c576523 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -209,7 +209,7 @@
/* TODO: set mactime */
rx_status.freq = data->channel->center_freq;
rx_status.band = data->channel->band;
- rx_status.rate_idx = info->tx_rate_idx;
+ rx_status.rate_idx = info->control.rates[0].idx;
/* TODO: simulate signal strength (and optional packet drop) */
/* Copy skb to all enabled radios that are on the current frequency */
@@ -269,13 +269,9 @@
if (txi->control.sta)
hwsim_check_sta_magic(txi->control.sta);
- memset(&txi->status, 0, sizeof(txi->status));
- if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) {
- if (ack)
- txi->flags |= IEEE80211_TX_STAT_ACK;
- else
- txi->status.excessive_retries = 1;
- }
+ ieee80211_tx_info_clear_status(txi);
+ if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && ack)
+ txi->flags |= IEEE80211_TX_STAT_ACK;
ieee80211_tx_status_irqsafe(hw, skb);
return NETDEV_TX_OK;
}
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 81a9756..65be5ec 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -548,7 +548,7 @@
spin_lock_irqsave(&priv->tx_queue.lock, flags);
while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
- range = (void *)info->driver_data;
+ range = (void *)info->rate_driver_data;
if (range->start_addr == addr) {
struct p54_control_hdr *entry_hdr;
struct p54_tx_control_allocdata *entry_data;
@@ -559,7 +559,7 @@
struct memrecord *mr;
ni = IEEE80211_SKB_CB(entry->next);
- mr = (struct memrecord *)ni->driver_data;
+ mr = (struct memrecord *)ni->rate_driver_data;
freed = mr->start_addr - last_addr;
} else
freed = priv->rx_end - last_addr;
@@ -568,7 +568,7 @@
__skb_unlink(entry, &priv->tx_queue);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
- memset(&info->status, 0, sizeof(info->status));
+ ieee80211_tx_info_clear_status(info);
entry_hdr = (struct p54_control_hdr *) entry->data;
entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
@@ -578,10 +578,8 @@
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
if (!(payload->status & 0x01))
info->flags |= IEEE80211_TX_STAT_ACK;
- else
- info->status.excessive_retries = 1;
}
- info->status.retry_count = payload->retries - 1;
+ info->status.rates[0].count = payload->retries;
info->status.ack_signal = p54_rssi_to_dbm(dev,
le16_to_cpu(payload->ack_rssi));
skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
@@ -699,7 +697,7 @@
while (left--) {
u32 hole_size;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
- struct memrecord *range = (void *)info->driver_data;
+ struct memrecord *range = (void *)info->rate_driver_data;
hole_size = range->start_addr - last_addr;
if (!target_skb && hole_size >= len) {
target_skb = entry->prev;
@@ -715,7 +713,7 @@
largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
if (!skb_queue_empty(&priv->tx_queue)) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(target_skb);
- struct memrecord *range = (void *)info->driver_data;
+ struct memrecord *range = (void *)info->rate_driver_data;
target_addr = range->end_addr;
}
} else
@@ -723,7 +721,7 @@
if (skb) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct memrecord *range = (void *)info->driver_data;
+ struct memrecord *range = (void *)info->rate_driver_data;
range->start_addr = target_addr;
range->end_addr = target_addr + len;
__skb_queue_after(&priv->tx_queue, target_skb, skb);
@@ -806,6 +804,7 @@
size_t padding, len;
u8 rate;
u8 cts_rate = 0x20;
+ u8 rc_flags;
current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4];
if (unlikely(current_queue->len > current_queue->limit))
@@ -828,18 +827,19 @@
hdr->magic1 = cpu_to_le16(0x0010);
hdr->len = cpu_to_le16(len);
hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
- hdr->retry1 = hdr->retry2 = info->control.retry_limit;
+ hdr->retry1 = hdr->retry2 = info->control.rates[0].count;
/* TODO: add support for alternate retry TX rates */
rate = ieee80211_get_tx_rate(dev, info)->hw_value;
- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) {
+ rc_flags = info->control.rates[0].flags;
+ if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) {
rate |= 0x10;
cts_rate |= 0x10;
}
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
rate |= 0x40;
cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
rate |= 0x20;
cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 697806cf..e1feab8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -498,7 +498,9 @@
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
+ u8 rate_idx, rate_flags;
/*
* Unmap the skb.
@@ -528,14 +530,18 @@
rt2x00dev->link.qual.tx_failed +=
test_bit(TXDONE_FAILURE, &txdesc->flags);
+ rate_idx = skbdesc->tx_rate_idx;
+ rate_flags = skbdesc->tx_rate_flags;
+
/*
* Initialize TX status
*/
memset(&tx_info->status, 0, sizeof(tx_info->status));
tx_info->status.ack_signal = 0;
- tx_info->status.excessive_retries =
- test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags);
- tx_info->status.retry_count = txdesc->retry;
+ tx_info->status.rates[0].idx = rate_idx;
+ tx_info->status.rates[0].flags = rate_flags;
+ tx_info->status.rates[0].count = txdesc->retry + 1;
+ tx_info->status.rates[1].idx = -1; /* terminate */
if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
@@ -544,7 +550,7 @@
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
}
- if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
+ if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 9311833..b32d59e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -39,7 +39,7 @@
unsigned int data_length;
int retval = 0;
- if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
data_length = sizeof(struct ieee80211_cts);
else
data_length = sizeof(struct ieee80211_rts);
@@ -64,11 +64,11 @@
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
- rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
- rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
+ rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS;
+ rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT;
rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
- if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
rts_info->flags |= IEEE80211_TX_CTL_NO_ACK;
else
rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
@@ -84,7 +84,7 @@
data_length += rt2x00crypto_tx_overhead(tx_info);
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
- if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
frag_skb->data, data_length, tx_info,
(struct ieee80211_cts *)(skb->data));
@@ -146,8 +146,8 @@
* inside the hardware.
*/
frame_control = le16_to_cpu(ieee80211hdr->frame_control);
- if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
- IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
+ if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
+ IEEE80211_TX_RC_USE_CTS_PROTECT)) &&
!rt2x00dev->ops->hw->set_rts_threshold) {
if (rt2x00queue_available(queue) <= 1)
goto exit_fail;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 451d410..070786e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -230,8 +230,15 @@
/*
* Determine retry information.
*/
- txdesc->retry_limit = tx_info->control.retry_limit;
- if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
+ txdesc->retry_limit = tx_info->control.rates[0].count - 1;
+ /*
+ * XXX: If at this point we knew whether the HW is going to use
+ * the RETRY_MODE bit or the retry_limit (currently all
+ * use the RETRY_MODE bit) we could do something like b43
+ * does, set the RETRY_MODE bit when the RC algorithm is
+ * requesting more than the long retry limit.
+ */
+ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
__set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags);
/*
@@ -371,10 +378,12 @@
int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
{
+ struct ieee80211_tx_info *tx_info;
struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
struct txentry_desc txdesc;
struct skb_frame_desc *skbdesc;
unsigned int iv_len = 0;
+ u8 rate_idx, rate_flags;
if (unlikely(rt2x00queue_full(queue)))
return -EINVAL;
@@ -399,13 +408,18 @@
iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;
/*
- * All information is retreived from the skb->cb array,
+ * All information is retrieved from the skb->cb array,
* now we should claim ownership of the driver part of that
- * array.
+ * array, preserving the bitrate index and flags.
*/
+ tx_info = IEEE80211_SKB_CB(skb);
+ rate_idx = tx_info->control.rates[0].idx;
+ rate_flags = tx_info->control.rates[0].flags;
skbdesc = get_skb_frame_desc(entry->skb);
memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->entry = entry;
+ skbdesc->tx_rate_idx = rate_idx;
+ skbdesc->tx_rate_flags = rate_flags;
/*
* When hardware encryption is supported, and this frame
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 9dbf04f..4d3c724 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -104,6 +104,8 @@
*
* @flags: Frame flags, see &enum skb_frame_desc_flags.
* @desc_len: Length of the frame descriptor.
+ * @tx_rate_idx: the index of the TX rate, used for TX status reporting
+ * @tx_rate_flags: the TX rate flags, used for TX status reporting
* @desc: Pointer to descriptor part of the frame.
* Note that this pointer could point to something outside
* of the scope of the skb->data pointer.
@@ -113,9 +115,12 @@
* @entry: The entry to which this sk buffer belongs.
*/
struct skb_frame_desc {
- unsigned int flags;
+ u8 flags;
- unsigned int desc_len;
+ u8 desc_len;
+ u8 tx_rate_idx;
+ u8 tx_rate_flags;
+
void *desc;
__le32 iv;
diff --git a/drivers/net/wireless/rtl8180_dev.c b/drivers/net/wireless/rtl8180_dev.c
index e8d2239..6c226c0 100644
--- a/drivers/net/wireless/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl8180_dev.c
@@ -182,15 +182,13 @@
skb->len, PCI_DMA_TODEVICE);
info = IEEE80211_SKB_CB(skb);
- memset(&info->status, 0, sizeof(info->status));
+ ieee80211_tx_info_clear_status(info);
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- if (flags & RTL818X_TX_DESC_FLAG_TX_OK)
- info->flags |= IEEE80211_TX_STAT_ACK;
- else
- info->status.excessive_retries = 1;
- }
- info->status.retry_count = flags & 0xFF;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (flags & RTL818X_TX_DESC_FLAG_TX_OK))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ info->status.rates[0].count = (flags & 0xFF) + 1;
ieee80211_tx_status_irqsafe(dev, skb);
if (ring->entries - skb_queue_len(&ring->queue) == 2)
@@ -243,6 +241,7 @@
unsigned int idx, prio;
dma_addr_t mapping;
u32 tx_flags;
+ u8 rc_flags;
u16 plcp_len = 0;
__le16 rts_duration = 0;
@@ -261,15 +260,16 @@
tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
RTL818X_TX_DESC_FLAG_NO_ENC;
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
+ rc_flags = info->control.rates[0].flags;
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
tx_flags |= RTL818X_TX_DESC_FLAG_CTS;
tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
}
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
info);
@@ -292,9 +292,9 @@
entry->plcp_len = cpu_to_le16(plcp_len);
entry->tx_buf = cpu_to_le32(mapping);
entry->frame_len = cpu_to_le32(skb->len);
- entry->flags2 = info->control.retries[0].rate_idx >= 0 ?
+ entry->flags2 = info->control.rates[1].idx >= 0 ?
ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
- entry->retry_limit = info->control.retry_limit;
+ entry->retry_limit = info->control.rates[0].count;
entry->flags = cpu_to_le32(tx_flags);
__skb_queue_tail(&ring->queue, skb);
if (ring->entries - skb_queue_len(&ring->queue) < 2)
@@ -855,7 +855,7 @@
priv = dev->priv;
priv->pdev = pdev;
- dev->max_altrates = 1;
+ dev->max_rates = 2;
SET_IEEE80211_DEV(dev, &pdev->dev);
pci_set_drvdata(pdev, dev);
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index cd839bc..6260ed8 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -160,13 +160,13 @@
{
struct sk_buff *skb = (struct sk_buff *)urb->context;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_hw *hw = info->driver_data[0];
+ struct ieee80211_hw *hw = info->rate_driver_data[0];
struct rtl8187_priv *priv = hw->priv;
- usb_free_urb(info->driver_data[1]);
+ usb_free_urb(info->rate_driver_data[1]);
skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
sizeof(struct rtl8187_tx_hdr));
- memset(&info->status, 0, sizeof(info->status));
+ ieee80211_tx_info_clear_status(info);
info->flags |= IEEE80211_TX_STAT_ACK;
ieee80211_tx_status_irqsafe(hw, skb);
}
@@ -194,12 +194,12 @@
flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
flags |= RTL818X_TX_DESC_FLAG_RTS;
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
rts_dur = ieee80211_rts_duration(dev, priv->vif,
skb->len, info);
- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
+ } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
flags |= RTL818X_TX_DESC_FLAG_CTS;
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
}
@@ -210,7 +210,7 @@
hdr->flags = cpu_to_le32(flags);
hdr->len = 0;
hdr->rts_duration = rts_dur;
- hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
+ hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
buf = hdr;
ep = 2;
@@ -228,7 +228,7 @@
memset(hdr, 0, sizeof(*hdr));
hdr->flags = cpu_to_le32(flags);
hdr->rts_duration = rts_dur;
- hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
+ hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
hdr->tx_duration =
ieee80211_generic_frame_duration(dev, priv->vif,
skb->len, txrate);
@@ -240,8 +240,8 @@
ep = epmap[skb_get_queue_mapping(skb)];
}
- info->driver_data[0] = dev;
- info->driver_data[1] = urb;
+ info->rate_driver_data[0] = dev;
+ info->rate_driver_data[1] = urb;
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
buf, skb->len, rtl8187_tx_cb, skb);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6c3e218..2f0802b 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -296,15 +296,14 @@
* If no status information has been requested, the skb is freed.
*/
static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
- u32 flags, int ackssi, bool success)
+ int ackssi, bool success)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- memset(&info->status, 0, sizeof(info->status));
+ ieee80211_tx_info_clear_status(info);
- if (!success)
- info->status.excessive_retries = 1;
- info->flags |= flags;
+ if (success)
+ info->flags |= IEEE80211_TX_STAT_ACK;
info->status.ack_signal = ackssi;
ieee80211_tx_status_irqsafe(hw, skb);
}
@@ -326,7 +325,7 @@
if (skb == NULL)
return;
- tx_status(hw, skb, 0, 0, 0);
+ tx_status(hw, skb, 0, 0);
}
/**
@@ -342,12 +341,12 @@
void zd_mac_tx_to_dev(struct sk_buff *skb, int error)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_hw *hw = info->driver_data[0];
+ struct ieee80211_hw *hw = info->rate_driver_data[0];
skb_pull(skb, sizeof(struct zd_ctrlset));
if (unlikely(error ||
(info->flags & IEEE80211_TX_CTL_NO_ACK))) {
- tx_status(hw, skb, 0, 0, !error);
+ tx_status(hw, skb, 0, !error);
} else {
struct sk_buff_head *q =
&zd_hw_mac(hw)->ack_wait_queue;
@@ -406,7 +405,8 @@
}
static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
- struct ieee80211_hdr *header, u32 flags)
+ struct ieee80211_hdr *header,
+ struct ieee80211_tx_info *info)
{
/*
* CONTROL TODO:
@@ -417,7 +417,7 @@
cs->control = 0;
/* First fragment */
- if (flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
cs->control |= ZD_CS_NEED_RANDOM_BACKOFF;
/* Multicast */
@@ -428,10 +428,10 @@
if (ieee80211_is_pspoll(header->frame_control))
cs->control |= ZD_CS_PS_POLL_FRAME;
- if (flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
cs->control |= ZD_CS_RTS;
- if (flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
cs->control |= ZD_CS_SELF_CTS;
/* FIXME: Management frame? */
@@ -517,12 +517,12 @@
txrate = ieee80211_get_tx_rate(mac->hw, info);
cs->modulation = txrate->hw_value;
- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
cs->modulation = txrate->hw_value_short;
cs->tx_length = cpu_to_le16(frag_len);
- cs_set_control(mac, cs, hdr, info->flags);
+ cs_set_control(mac, cs, hdr, info);
packet_length = frag_len + sizeof(struct zd_ctrlset) + 10;
ZD_ASSERT(packet_length <= 0xffff);
@@ -577,7 +577,7 @@
if (r)
return r;
- info->driver_data[0] = hw;
+ info->rate_driver_data[0] = hw;
r = zd_usb_tx(&mac->chip.usb, skb);
if (r)
@@ -618,7 +618,7 @@
if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1)))
{
__skb_unlink(skb, q);
- tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1);
+ tx_status(hw, skb, stats->signal, 1);
goto out;
}
}
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index a60ae86..d7a2f52 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -907,7 +907,7 @@
* it might be freed by zd_mac_tx_to_dev or mac80211)
*/
info = IEEE80211_SKB_CB(skb);
- usb = &zd_hw_mac(info->driver_data[0])->chip.usb;
+ usb = &zd_hw_mac(info->rate_driver_data[0])->chip.usb;
zd_mac_tx_to_dev(skb, urb->status);
free_tx_urb(usb, urb);
tx_dec_submitted_urbs(usb);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9801afb..3741c0a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -214,29 +214,24 @@
* These flags are used with the @flags member of &ieee80211_tx_info.
*
* @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
- * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
- * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
- * for combined 802.11g / 802.11b networks)
+ * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
+ * number to this frame, taking care of not overwriting the fragment
+ * number and increasing the sequence number only when the
+ * IEEE80211_TX_CTL_FIRST_FRAGMENT flag is set. mac80211 will properly
+ * assign sequence numbers to QoS-data frames but cannot do so correctly
+ * for non-QoS-data and management frames because beacons need them from
+ * that counter as well and mac80211 cannot guarantee proper sequencing.
+ * If this flag is set, the driver should instruct the hardware to
+ * assign a sequence number to the frame or assign one itself. Cf. IEEE
+ * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
+ * beacons and always be clear for frames without a sequence number field.
* @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack
- * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD
* @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination
* station
- * @IEEE80211_TX_CTL_REQUEUE: TBD
* @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame
- * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
- * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
- * through set_retry_limit configured long retry value
* @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
* @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
- * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
- * of streams when this flag is on can be extracted from antenna_sel_tx,
- * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n
- * antennas marked use MIMO_n.
- * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame
- * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width
- * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels
- * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval
- * @IEEE80211_TX_CTL_INJECTED: TBD
+ * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211.
* @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted
* because the destination STA was in powersave mode.
* @IEEE80211_TX_STAT_ACK: Frame was acknowledged
@@ -244,62 +239,70 @@
* is for the whole aggregation.
* @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
* so consider using block ack request (BAR).
- * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
- * number to this frame, taking care of not overwriting the fragment
- * number and increasing the sequence number only when the
- * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly
- * assign sequence numbers to QoS-data frames but cannot do so correctly
- * for non-QoS-data and management frames because beacons need them from
- * that counter as well and mac80211 cannot guarantee proper sequencing.
- * If this flag is set, the driver should instruct the hardware to
- * assign a sequence number to the frame or assign one itself. Cf. IEEE
- * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
- * beacons always be clear for frames without a sequence number field.
+ * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
+ * set by rate control algorithms to indicate probe rate, will
+ * be cleared for fragmented frames (except on the last fragment)
+ * @IEEE80211_TX_CTL_REQUEUE: REMOVE THIS
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0),
- IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2),
- IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3),
- IEEE80211_TX_CTL_NO_ACK = BIT(4),
- IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5),
- IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6),
- IEEE80211_TX_CTL_REQUEUE = BIT(7),
- IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8),
- IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9),
- IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10),
- IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12),
- IEEE80211_TX_CTL_AMPDU = BIT(13),
- IEEE80211_TX_CTL_OFDM_HT = BIT(14),
- IEEE80211_TX_CTL_GREEN_FIELD = BIT(15),
- IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16),
- IEEE80211_TX_CTL_DUP_DATA = BIT(17),
- IEEE80211_TX_CTL_SHORT_GI = BIT(18),
- IEEE80211_TX_CTL_INJECTED = BIT(19),
- IEEE80211_TX_STAT_TX_FILTERED = BIT(20),
- IEEE80211_TX_STAT_ACK = BIT(21),
- IEEE80211_TX_STAT_AMPDU = BIT(22),
- IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23),
- IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24),
+ IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1),
+ IEEE80211_TX_CTL_NO_ACK = BIT(2),
+ IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3),
+ IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4),
+ IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5),
+ IEEE80211_TX_CTL_AMPDU = BIT(6),
+ IEEE80211_TX_CTL_INJECTED = BIT(7),
+ IEEE80211_TX_STAT_TX_FILTERED = BIT(8),
+ IEEE80211_TX_STAT_ACK = BIT(9),
+ IEEE80211_TX_STAT_AMPDU = BIT(10),
+ IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
+ IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
+
+ /* XXX: remove this */
+ IEEE80211_TX_CTL_REQUEUE = BIT(13),
+};
+
+enum mac80211_rate_control_flags {
+ IEEE80211_TX_RC_USE_RTS_CTS = BIT(0),
+ IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1),
+ IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
+
+ /* rate index is an MCS rate number instead of an index */
+ IEEE80211_TX_RC_MCS = BIT(3),
+ IEEE80211_TX_RC_GREEN_FIELD = BIT(4),
+ IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5),
+ IEEE80211_TX_RC_DUP_DATA = BIT(6),
+ IEEE80211_TX_RC_SHORT_GI = BIT(7),
};
-#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \
- (sizeof(((struct sk_buff *)0)->cb) - 8)
-#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \
- (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *))
+/* there are 40 bytes if you don't need the rateset to be kept */
+#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE 40
-/* maximum number of alternate rate retry stages */
-#define IEEE80211_TX_MAX_ALTRATE 3
+/* if you do need the rateset, then you have less space */
+#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
+
+/* maximum number of rate stages */
+#define IEEE80211_TX_MAX_RATES 5
/**
- * struct ieee80211_tx_altrate - alternate rate selection/status
+ * struct ieee80211_tx_rate - rate selection/status
*
- * @rate_idx: rate index to attempt to send with
+ * @idx: rate index to attempt to send with
+ * @flags: rate control flags (&enum mac80211_rate_control_flags)
* @limit: number of retries before fallback
+ *
+ * A value of -1 for @idx indicates an invalid rate and, if used
+ * in an array of retry rates, that no more rates should be tried.
+ *
+ * When used for transmit status reporting, the driver should
+ * always report the rate along with the flags it used.
*/
-struct ieee80211_tx_altrate {
- s8 rate_idx;
- u8 limit;
+struct ieee80211_tx_rate {
+ s8 idx;
+ u8 count;
+ u8 flags;
};
/**
@@ -314,15 +317,12 @@
* it may be NULL.
*
* @flags: transmit info flags, defined above
- * @band: TBD
- * @tx_rate_idx: TBD
+ * @band: the band to transmit on (use for checking for races)
* @antenna_sel_tx: antenna to use, 0 for automatic diversity
* @control: union for control data
* @status: union for status data
* @driver_data: array of driver_data pointers
* @retry_count: number of retries
- * @excessive_retries: set to 1 if the frame was retried many times
- * but not acknowledged
* @ampdu_ack_len: number of aggregated frames.
* relevant only if IEEE80211_TX_STATUS_AMPDU was set.
* @ampdu_ack_map: block ack bit map for the aggregation.
@@ -333,31 +333,43 @@
/* common information */
u32 flags;
u8 band;
- s8 tx_rate_idx;
+
u8 antenna_sel_tx;
- /* 1 byte hole */
+ /* 2 byte hole */
union {
struct {
+ union {
+ /* rate control */
+ struct {
+ struct ieee80211_tx_rate rates[
+ IEEE80211_TX_MAX_RATES];
+ s8 rts_cts_rate_idx;
+ };
+ /* only needed before rate control */
+ unsigned long jiffies;
+ };
/* NB: vif can be NULL for injected frames */
struct ieee80211_vif *vif;
struct ieee80211_key_conf *hw_key;
struct ieee80211_sta *sta;
- unsigned long jiffies;
- s8 rts_cts_rate_idx;
- u8 retry_limit;
- struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE];
} control;
struct {
+ struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
+ u8 ampdu_ack_len;
u64 ampdu_ack_map;
int ack_signal;
- struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1];
- u8 retry_count;
- bool excessive_retries;
- u8 ampdu_ack_len;
+ /* 8 bytes free */
} status;
- void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS];
+ struct {
+ struct ieee80211_tx_rate driver_rates[
+ IEEE80211_TX_MAX_RATES];
+ void *rate_driver_data[
+ IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
+ };
+ void *driver_data[
+ IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)];
};
};
@@ -366,6 +378,41 @@
return (struct ieee80211_tx_info *)skb->cb;
}
+/**
+ * ieee80211_tx_info_clear_status - clear TX status
+ *
+ * @info: The &struct ieee80211_tx_info to be cleared.
+ *
+ * When the driver passes an skb back to mac80211, it must report
+ * a number of things in TX status. This function clears everything
+ * in the TX status but the rate control information (it does clear
+ * the count since you need to fill that in anyway).
+ *
+ * NOTE: You can only use this function if you do NOT use
+ * info->driver_data! Use info->rate_driver_data
+ * instead if you need only the less space that allows.
+ */
+static inline void
+ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
+{
+ int i;
+
+ BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
+ offsetof(struct ieee80211_tx_info, control.rates));
+ BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
+ offsetof(struct ieee80211_tx_info, driver_rates));
+ BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) != 8);
+ /* clear the rate counts */
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
+ info->status.rates[i].count = 0;
+
+ BUILD_BUG_ON(
+ offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+ memset(&info->status.ampdu_ack_len, 0,
+ sizeof(struct ieee80211_tx_info) -
+ offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+}
+
/**
* enum mac80211_rx_flags - receive flags
@@ -869,8 +916,8 @@
* @sta_data_size: size (in bytes) of the drv_priv data area
* within &struct ieee80211_sta.
*
- * @max_altrates: maximum number of alternate rate retry stages
- * @max_altrate_tries: maximum number of tries for each stage
+ * @max_rates: maximum number of alternate rate retry stages
+ * @max_rate_tries: maximum number of tries for each stage
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
@@ -887,8 +934,8 @@
u16 ampdu_queues;
u16 max_listen_interval;
s8 max_signal;
- u8 max_altrates;
- u8 max_altrate_tries;
+ u8 max_rates;
+ u8 max_rate_tries;
};
/**
@@ -927,9 +974,9 @@
ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
const struct ieee80211_tx_info *c)
{
- if (WARN_ON(c->tx_rate_idx < 0))
+ if (WARN_ON(c->control.rates[0].idx < 0))
return NULL;
- return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx];
+ return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx];
}
static inline struct ieee80211_rate *
@@ -945,9 +992,9 @@
ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
const struct ieee80211_tx_info *c, int idx)
{
- if (c->control.retries[idx].rate_idx < 0)
+ if (c->control.rates[idx + 1].idx < 0)
return NULL;
- return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx];
+ return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx];
}
/**
@@ -1840,17 +1887,30 @@
/* Rate control API */
+
/**
- * struct rate_selection - rate information for/from rate control algorithms
+ * struct ieee80211_tx_rate_control - rate control information for/from RC algo
*
- * @rate_idx: selected transmission rate index
- * @nonerp_idx: Non-ERP rate to use instead if ERP cannot be used
- * @probe_idx: rate for probing (or -1)
- * @max_rate_idx: maximum rate index that can be used, this is
- * input to the algorithm and will be enforced
+ * @hw: The hardware the algorithm is invoked for.
+ * @sband: The band this frame is being transmitted on.
+ * @bss_conf: the current BSS configuration
+ * @reported_rate: The rate control algorithm can fill this in to indicate
+ * which rate should be reported to userspace as the current rate and
+ * used for rate calculations in the mesh network.
+ * @rts: whether RTS will be used for this frame because it is longer than the
+ * RTS threshold
+ * @short_preamble: whether mac80211 will request short-preamble transmission
+ * if the selected rate supports it
+ * @max_rate_idx: user-requested maximum rate (not MCS for now)
*/
-struct rate_selection {
- s8 rate_idx, nonerp_idx, probe_idx, max_rate_idx;
+struct ieee80211_tx_rate_control {
+ struct ieee80211_hw *hw;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_bss_conf *bss_conf;
+ struct sk_buff *skb;
+ struct ieee80211_tx_rate reported_rate;
+ bool rts, short_preamble;
+ u8 max_rate_idx;
};
struct rate_control_ops {
@@ -1869,10 +1929,8 @@
void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta,
struct sk_buff *skb);
- void (*get_rate)(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb,
- struct rate_selection *sel);
+ void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc);
void (*add_sta_debugfs)(void *priv, void *priv_sta,
struct dentry *dir);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6f8756d..fe4efdd 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -142,7 +142,6 @@
#define IEEE80211_TX_FRAGMENTED BIT(0)
#define IEEE80211_TX_UNICAST BIT(1)
#define IEEE80211_TX_PS_BUFFERED BIT(2)
-#define IEEE80211_TX_PROBE_LAST_FRAG BIT(3)
struct ieee80211_tx_data {
struct sk_buff *skb;
@@ -153,11 +152,6 @@
struct ieee80211_key *key;
struct ieee80211_channel *channel;
- s8 rate_idx;
- /* use this rate (if set) for last fragment; rate can
- * be set to lower rate for the first fragments, e.g.,
- * when using CTS protection with IEEE 802.11g. */
- s8 last_frag_rate_idx;
/* Extra fragments (in addition to the first fragment
* in skb) */
@@ -203,9 +197,7 @@
struct ieee80211_tx_stored_packet {
struct sk_buff *skb;
struct sk_buff **extra_frag;
- s8 last_frag_rate_idx;
int num_extra_frag;
- bool last_frag_rate_ctrl_probe;
};
struct beacon_data {
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index ffff549..88c1975 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -41,6 +41,8 @@
*/
struct ieee80211_tx_status_rtap_hdr {
struct ieee80211_radiotap_header hdr;
+ u8 rate;
+ u8 padding_for_rate;
__le16 tx_flags;
u8 data_retries;
} __attribute__ ((packed));
@@ -465,13 +467,28 @@
struct ieee80211_sub_if_data *sdata;
struct net_device *prev_dev = NULL;
struct sta_info *sta;
+ int retry_count = -1, i;
+
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ /* the HW cannot have attempted that rate */
+ if (i >= hw->max_rates) {
+ info->status.rates[i].idx = -1;
+ info->status.rates[i].count = 0;
+ }
+
+ retry_count += info->status.rates[i].count;
+ }
+ if (retry_count < 0)
+ retry_count = 0;
rcu_read_lock();
+ sband = local->hw.wiphy->bands[info->band];
+
sta = sta_info_get(local, hdr->addr1);
if (sta) {
- if (info->status.excessive_retries &&
+ if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
test_sta_flags(sta, WLAN_STA_PS)) {
/*
* The STA is in power save mode, so assume
@@ -502,12 +519,11 @@
rcu_read_unlock();
return;
} else {
- if (info->status.excessive_retries)
+ if (!(info->flags & IEEE80211_TX_STAT_ACK))
sta->tx_retry_failed++;
- sta->tx_retry_count += info->status.retry_count;
+ sta->tx_retry_count += retry_count;
}
- sband = local->hw.wiphy->bands[info->band];
rate_control_tx_status(local, sband, sta, skb);
}
@@ -528,9 +544,9 @@
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
local->dot11MulticastTransmittedFrameCount++;
- if (info->status.retry_count > 0)
+ if (retry_count > 0)
local->dot11RetryCount++;
- if (info->status.retry_count > 1)
+ if (retry_count > 1)
local->dot11MultipleRetryCount++;
}
@@ -574,19 +590,30 @@
rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
rthdr->hdr.it_present =
cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
- (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
+ (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
+ (1 << IEEE80211_RADIOTAP_RATE));
if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) &&
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
+ /*
+ * XXX: Once radiotap gets the bitmap reset thing the vendor
+ * extensions proposal contains, we can actually report
+ * the whole set of tries we did.
+ */
+ if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+ (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
- else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+ else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
+ if (info->status.rates[0].idx >= 0 &&
+ !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
+ rthdr->rate = sband->bitrates[
+ info->status.rates[0].idx].bitrate / 5;
- rthdr->data_retries = info->status.retry_count;
+ /* for now report the total retry_count */
+ rthdr->data_retries = retry_count;
/* XXX: is this sufficient for BPF? */
skb_set_mac_header(skb, 0);
@@ -671,8 +698,9 @@
BUG_ON(!ops->configure_filter);
local->ops = ops;
- local->hw.queues = 1; /* default */
-
+ /* set up some defaults */
+ local->hw.queues = 1;
+ local->hw.max_rates = 1;
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
local->hw.conf.long_frame_max_tx_count = 4;
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 501c783..e8d573d 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -218,12 +218,16 @@
if (sta->fail_avg >= 100)
return MAX_METRIC;
+
+ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
+ return MAX_METRIC;
+
err = (sta->fail_avg << ARITH_SHIFT) / 100;
/* bitrate is in units of 100 Kbps, while we need rate in units of
* 1Mbps. This will be corrected on tx_time computation.
*/
- rate = sband->bitrates[sta->last_txrate_idx].bitrate;
+ rate = sband->bitrates[sta->last_tx_rate.idx].bitrate;
tx_time = (device_constant + 10 * test_frame_len / rate);
estimated_retx = ((1 << (2 * ARITH_SHIFT)) / (s_unit - err));
result = (tx_time * estimated_retx) >> (2 * ARITH_SHIFT) ;
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 5d78672..3fa7ab2 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -199,48 +199,44 @@
}
void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_supported_band *sband,
- struct sta_info *sta, struct sk_buff *skb,
- struct rate_selection *sel)
+ struct sta_info *sta,
+ struct ieee80211_tx_rate_control *txrc)
{
struct rate_control_ref *ref = sdata->local->rate_ctrl;
void *priv_sta = NULL;
struct ieee80211_sta *ista = NULL;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
int i;
- sel->rate_idx = -1;
- sel->nonerp_idx = -1;
- sel->probe_idx = -1;
- sel->max_rate_idx = sdata->max_ratectrl_rateidx;
-
if (sta) {
ista = &sta->sta;
priv_sta = sta->rate_ctrl_priv;
}
- if (sta && sdata->force_unicast_rateidx > -1)
- sel->rate_idx = sdata->force_unicast_rateidx;
- else
- ref->ops->get_rate(ref->priv, sband, ista, priv_sta, skb, sel);
-
- if (sdata->max_ratectrl_rateidx > -1 &&
- sel->rate_idx > sdata->max_ratectrl_rateidx)
- sel->rate_idx = sdata->max_ratectrl_rateidx;
-
- BUG_ON(sel->rate_idx < 0);
-
- /* Select a non-ERP backup rate. */
- if (sel->nonerp_idx < 0) {
- for (i = 0; i < sband->n_bitrates; i++) {
- struct ieee80211_rate *rate = &sband->bitrates[i];
- if (sband->bitrates[sel->rate_idx].bitrate < rate->bitrate)
- break;
-
- if (rate_supported(ista, sband->band, i) &&
- !(rate->flags & IEEE80211_RATE_ERP_G))
- sel->nonerp_idx = i;
- }
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ info->control.rates[i].idx = -1;
+ info->control.rates[i].flags = 0;
+ info->control.rates[i].count = 1;
}
+
+ if (sta && sdata->force_unicast_rateidx > -1)
+ info->control.rates[0].idx = sdata->force_unicast_rateidx;
+ else
+ ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
+
+ /*
+ * try to enforce the maximum rate the user wanted
+ */
+ if (sdata->max_ratectrl_rateidx > -1)
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS)
+ continue;
+ info->control.rates[i].idx =
+ min_t(s8, info->control.rates[i].idx,
+ sdata->max_ratectrl_rateidx);
+ }
+
+ BUG_ON(info->control.rates[0].idx < 0);
}
struct rate_control_ref *rate_control_get(struct rate_control_ref *ref)
diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index d0092f8..7c25edf 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -31,9 +31,8 @@
struct rate_control_ref *rate_control_alloc(const char *name,
struct ieee80211_local *local);
void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_supported_band *sband,
- struct sta_info *sta, struct sk_buff *skb,
- struct rate_selection *sel);
+ struct sta_info *sta,
+ struct ieee80211_tx_rate_control *txrc);
struct rate_control_ref *rate_control_get(struct rate_control_ref *ref);
void rate_control_put(struct rate_control_ref *ref);
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index f6d69da..759ddd8 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -169,30 +169,20 @@
{
struct minstrel_sta_info *mi = priv_sta;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_tx_altrate *ar = info->status.retries;
- struct minstrel_priv *mp = priv;
- int i, ndx, tries;
- int success = 0;
+ struct ieee80211_tx_rate *ar = info->status.rates;
+ int i, ndx;
+ int success;
- if (!info->status.excessive_retries)
- success = 1;
+ success = !!(info->flags & IEEE80211_TX_STAT_ACK);
- if (!mp->has_mrr || (ar[0].rate_idx < 0)) {
- ndx = rix_to_ndx(mi, info->tx_rate_idx);
- tries = info->status.retry_count + 1;
- mi->r[ndx].success += success;
- mi->r[ndx].attempts += tries;
- return;
- }
-
- for (i = 0; i < 4; i++) {
- if (ar[i].rate_idx < 0)
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ if (ar[i].idx < 0)
break;
- ndx = rix_to_ndx(mi, ar[i].rate_idx);
- mi->r[ndx].attempts += ar[i].limit + 1;
+ ndx = rix_to_ndx(mi, ar[i].idx);
+ mi->r[ndx].attempts += ar[i].count;
- if ((i != 3) && (ar[i + 1].rate_idx < 0))
+ if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
mi->r[ndx].success += success;
}
@@ -210,9 +200,9 @@
{
unsigned int retry = mr->adjusted_retry_count;
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
retry = max(2U, min(mr->retry_count_rtscts, retry));
- else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+ else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
retry = max(2U, min(mr->retry_count_cts, retry));
return retry;
}
@@ -234,14 +224,15 @@
}
void
-minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb, struct rate_selection *sel)
+minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
+ void *priv_sta, struct ieee80211_tx_rate_control *txrc)
{
+ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_supported_band *sband = txrc->sband;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct minstrel_sta_info *mi = priv_sta;
struct minstrel_priv *mp = priv;
- struct ieee80211_tx_altrate *ar = info->control.retries;
+ struct ieee80211_tx_rate *ar = info->control.rates;
unsigned int ndx, sample_ndx = 0;
bool mrr;
bool sample_slower = false;
@@ -251,16 +242,12 @@
int sample_rate;
if (!sta || !mi || use_low_rate(skb)) {
- sel->rate_idx = rate_lowest_index(sband, sta);
+ ar[0].idx = rate_lowest_index(sband, sta);
+ ar[0].count = mp->max_retry;
return;
}
- mrr = mp->has_mrr;
-
- /* mac80211 does not allow mrr for RTS/CTS */
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
- mrr = false;
+ mrr = mp->has_mrr && !txrc->rts && !txrc->bss_conf->use_cts_prot;
if (time_after(jiffies, mi->stats_update + (mp->update_interval *
HZ) / 1000))
@@ -315,13 +302,12 @@
mi->sample_deferred++;
}
}
- sel->rate_idx = mi->r[ndx].rix;
- info->control.retry_limit = minstrel_get_retry_count(&mi->r[ndx], info);
+ ar[0].idx = mi->r[ndx].rix;
+ ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info);
if (!mrr) {
- ar[0].rate_idx = mi->lowest_rix;
- ar[0].limit = mp->max_retry;
- ar[1].rate_idx = -1;
+ ar[1].idx = mi->lowest_rix;
+ ar[1].count = mp->max_retry;
return;
}
@@ -336,9 +322,9 @@
}
mrr_ndx[1] = mi->max_prob_rate;
mrr_ndx[2] = 0;
- for (i = 0; i < 3; i++) {
- ar[i].rate_idx = mi->r[mrr_ndx[i]].rix;
- ar[i].limit = mi->r[mrr_ndx[i]].adjusted_retry_count;
+ for (i = 1; i < 4; i++) {
+ ar[i].idx = mi->r[mrr_ndx[i - 1]].rix;
+ ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count;
}
}
@@ -532,13 +518,13 @@
/* maximum time that the hw is allowed to stay in one MRR segment */
mp->segment_size = 6000;
- if (hw->max_altrate_tries > 0)
- mp->max_retry = hw->max_altrate_tries;
+ if (hw->max_rate_tries > 0)
+ mp->max_retry = hw->max_rate_tries;
else
/* safe default, does not necessarily have to match hw properties */
mp->max_retry = 7;
- if (hw->max_altrates >= 3)
+ if (hw->max_rates >= 4)
mp->has_mrr = true;
mp->hw = hw;
diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h
index ce099ea..1a873f0 100644
--- a/net/mac80211/rc80211_pid.h
+++ b/net/mac80211/rc80211_pid.h
@@ -61,6 +61,7 @@
union rc_pid_event_data {
/* RC_PID_EVENT_TX_STATUS */
struct {
+ u32 flags;
struct ieee80211_tx_info tx_status;
};
/* RC_PID_EVENT_TYPE_RATE_CHANGE */
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 86eb374..92caecf 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -241,7 +241,7 @@
/* Ignore all frames that were sent with a different rate than the rate
* we currently advise mac80211 to use. */
- if (info->tx_rate_idx != spinfo->txrate_idx)
+ if (info->status.rates[0].idx != spinfo->txrate_idx)
return;
spinfo->tx_num_xmit++;
@@ -253,10 +253,10 @@
/* We count frames that totally failed to be transmitted as two bad
* frames, those that made it out but had some retries as one good and
* one bad frame. */
- if (info->status.excessive_retries) {
+ if (!(info->flags & IEEE80211_TX_STAT_ACK)) {
spinfo->tx_num_failed += 2;
spinfo->tx_num_xmit++;
- } else if (info->status.retry_count) {
+ } else if (info->status.rates[0].count) {
spinfo->tx_num_failed++;
spinfo->tx_num_xmit++;
}
@@ -270,23 +270,32 @@
}
static void
-rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta,
- struct sk_buff *skb,
- struct rate_selection *sel)
+rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta,
+ void *priv_sta,
+ struct ieee80211_tx_rate_control *txrc)
{
+ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_supported_band *sband = txrc->sband;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct rc_pid_sta_info *spinfo = priv_sta;
int rateidx;
u16 fc;
+ if (txrc->rts)
+ info->control.rates[0].count =
+ txrc->hw->conf.long_frame_max_tx_count;
+ else
+ info->control.rates[0].count =
+ txrc->hw->conf.short_frame_max_tx_count;
+
/* Send management frames and broadcast/multicast data using lowest
* rate. */
fc = le16_to_cpu(hdr->frame_control);
if (!sta || !spinfo ||
(fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
is_multicast_ether_addr(hdr->addr1)) {
- sel->rate_idx = rate_lowest_index(sband, sta);
+ info->control.rates[0].idx = rate_lowest_index(sband, sta);
return;
}
@@ -295,7 +304,7 @@
if (rateidx >= sband->n_bitrates)
rateidx = sband->n_bitrates - 1;
- sel->rate_idx = rateidx;
+ info->control.rates[0].idx = rateidx;
#ifdef CONFIG_MAC80211_DEBUGFS
rate_control_pid_event_tx_rate(&spinfo->events,
diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c
index 8121d3b..a08a9b5 100644
--- a/net/mac80211/rc80211_pid_debugfs.c
+++ b/net/mac80211/rc80211_pid_debugfs.c
@@ -43,6 +43,7 @@
{
union rc_pid_event_data evd;
+ evd.flags = stat->flags;
memcpy(&evd.tx_status, stat, sizeof(struct ieee80211_tx_info));
rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_STATUS, &evd);
}
@@ -167,8 +168,8 @@
switch (ev->type) {
case RC_PID_EVENT_TYPE_TX_STATUS:
p += snprintf(pb + p, length - p, "tx_status %u %u",
- ev->data.tx_status.status.excessive_retries,
- ev->data.tx_status.status.retry_count);
+ !(ev->data.flags & IEEE80211_TX_STAT_ACK),
+ ev->data.tx_status.status.rates[0].idx);
break;
case RC_PID_EVENT_TYPE_RATE_CHANGE:
p += snprintf(pb + p, length - p, "rate_change %d %d",
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 168a39a..4ac372a 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -196,7 +196,7 @@
* @tx_packets: number of RX/TX MSDUs
* @tx_bytes: TBD
* @tx_fragments: number of transmitted MPDUs
- * @last_txrate_idx: Index of the last used transmit rate
+ * @last_txrate: description of the last used transmit rate
* @tid_seq: TBD
* @ampdu_mlme: TBD
* @timer_to_tid: identity mapping to ID timers
@@ -267,7 +267,7 @@
unsigned long tx_packets;
unsigned long tx_bytes;
unsigned long tx_fragments;
- unsigned int last_txrate_idx;
+ struct ieee80211_tx_rate last_tx_rate;
u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
/*
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 6f3e4be..21951ba 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -46,13 +46,20 @@
struct ieee80211_local *local = tx->local;
struct ieee80211_supported_band *sband;
struct ieee80211_hdr *hdr;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+
+ /* assume HW handles this */
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
+ return 0;
+
+ /* uh huh? */
+ if (WARN_ON_ONCE(info->control.rates[0].idx < 0))
+ return 0;
sband = local->hw.wiphy->bands[tx->channel->band];
- txrate = &sband->bitrates[tx->rate_idx];
+ txrate = &sband->bitrates[info->control.rates[0].idx];
- erp = 0;
- if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
- erp = txrate->flags & IEEE80211_RATE_ERP_G;
+ erp = txrate->flags & IEEE80211_RATE_ERP_G;
/*
* data and mgmt (except PS Poll):
@@ -437,47 +444,145 @@
static ieee80211_tx_result debug_noinline
ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
{
- struct rate_selection rsel;
- struct ieee80211_supported_band *sband;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+ struct ieee80211_hdr *hdr = (void *)tx->skb->data;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_rate *rate;
+ int i, len;
+ bool inval = false, rts = false, short_preamble = false;
+ struct ieee80211_tx_rate_control txrc;
+
+ memset(&txrc, 0, sizeof(txrc));
sband = tx->local->hw.wiphy->bands[tx->channel->band];
- if (likely(tx->rate_idx < 0)) {
- rate_control_get_rate(tx->sdata, sband, tx->sta,
- tx->skb, &rsel);
- if (tx->sta)
- tx->sta->last_txrate_idx = rsel.rate_idx;
- tx->rate_idx = rsel.rate_idx;
- if (unlikely(rsel.probe_idx >= 0)) {
- info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
- tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
- info->control.retries[0].rate_idx = tx->rate_idx;
- info->control.retries[0].limit = tx->local->hw.max_altrate_tries;
- tx->rate_idx = rsel.probe_idx;
- } else if (info->control.retries[0].limit == 0)
- info->control.retries[0].rate_idx = -1;
+ len = min_t(int, tx->skb->len + FCS_LEN,
+ tx->local->fragmentation_threshold);
- if (unlikely(tx->rate_idx < 0))
- return TX_DROP;
- } else
- info->control.retries[0].rate_idx = -1;
+ /* set up the tx rate control struct we give the RC algo */
+ txrc.hw = local_to_hw(tx->local);
+ txrc.sband = sband;
+ txrc.bss_conf = &tx->sdata->vif.bss_conf;
+ txrc.skb = tx->skb;
+ txrc.reported_rate.idx = -1;
+ txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx;
- if (tx->sdata->vif.bss_conf.use_cts_prot &&
- (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) {
- tx->last_frag_rate_idx = tx->rate_idx;
- if (rsel.probe_idx >= 0)
- tx->flags &= ~IEEE80211_TX_PROBE_LAST_FRAG;
- else
- tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
- tx->rate_idx = rsel.nonerp_idx;
- info->tx_rate_idx = rsel.nonerp_idx;
- info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
- } else {
- tx->last_frag_rate_idx = tx->rate_idx;
- info->tx_rate_idx = tx->rate_idx;
+ /* set up RTS protection if desired */
+ if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD &&
+ len > tx->local->rts_threshold) {
+ txrc.rts = rts = true;
}
- info->tx_rate_idx = tx->rate_idx;
+
+ /*
+ * Use short preamble if the BSS can handle it, but not for
+ * management frames unless we know the receiver can handle
+ * that -- the management frame might be to a station that
+ * just wants a probe response.
+ */
+ if (tx->sdata->vif.bss_conf.use_short_preamble &&
+ (ieee80211_is_data(hdr->frame_control) ||
+ (tx->sta && test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))))
+ txrc.short_preamble = short_preamble = true;
+
+
+ rate_control_get_rate(tx->sdata, tx->sta, &txrc);
+
+ if (unlikely(info->control.rates[0].idx < 0))
+ return TX_DROP;
+
+ if (txrc.reported_rate.idx < 0)
+ txrc.reported_rate = info->control.rates[0];
+
+ if (tx->sta)
+ tx->sta->last_tx_rate = txrc.reported_rate;
+
+ if (unlikely(!info->control.rates[0].count))
+ info->control.rates[0].count = 1;
+
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ /*
+ * XXX: verify the rate is in the basic rateset
+ */
+ return TX_CONTINUE;
+ }
+
+ /*
+ * set up the RTS/CTS rate as the fastest basic rate
+ * that is not faster than the data rate
+ *
+ * XXX: Should this check all retry rates?
+ */
+ if (!(info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) {
+ s8 baserate = 0;
+
+ rate = &sband->bitrates[info->control.rates[0].idx];
+
+ for (i = 0; i < sband->n_bitrates; i++) {
+ /* must be a basic rate */
+ if (!(tx->sdata->vif.bss_conf.basic_rates & BIT(i)))
+ continue;
+ /* must not be faster than the data rate */
+ if (sband->bitrates[i].bitrate > rate->bitrate)
+ continue;
+ /* maximum */
+ if (sband->bitrates[baserate].bitrate <
+ sband->bitrates[i].bitrate)
+ baserate = i;
+ }
+
+ info->control.rts_cts_rate_idx = baserate;
+ }
+
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ /*
+ * make sure there's no valid rate following
+ * an invalid one, just in case drivers don't
+ * take the API seriously to stop at -1.
+ */
+ if (inval) {
+ info->control.rates[i].idx = -1;
+ continue;
+ }
+ if (info->control.rates[i].idx < 0) {
+ inval = true;
+ continue;
+ }
+
+ /*
+ * For now assume MCS is already set up correctly, this
+ * needs to be fixed.
+ */
+ if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) {
+ WARN_ON(info->control.rates[i].idx > 76);
+ continue;
+ }
+
+ /* set up RTS protection if desired */
+ if (rts)
+ info->control.rates[i].flags |=
+ IEEE80211_TX_RC_USE_RTS_CTS;
+
+ /* RC is busted */
+ if (WARN_ON(info->control.rates[i].idx >=
+ sband->n_bitrates)) {
+ info->control.rates[i].idx = -1;
+ continue;
+ }
+
+ rate = &sband->bitrates[info->control.rates[i].idx];
+
+ /* set up short preamble */
+ if (short_preamble &&
+ rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)
+ info->control.rates[i].flags |=
+ IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
+
+ /* set up G protection */
+ if (!rts && tx->sdata->vif.bss_conf.use_cts_prot &&
+ rate->flags & IEEE80211_RATE_ERP_G)
+ info->control.rates[i].flags |=
+ IEEE80211_TX_RC_USE_CTS_PROTECT;
+ }
return TX_CONTINUE;
}
@@ -485,91 +590,7 @@
static ieee80211_tx_result debug_noinline
ieee80211_tx_h_misc(struct ieee80211_tx_data *tx)
{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
- struct ieee80211_supported_band *sband;
-
- sband = tx->local->hw.wiphy->bands[tx->channel->band];
-
- if (tx->sta)
- info->control.sta = &tx->sta->sta;
-
- if (!info->control.retry_limit) {
- if (!is_multicast_ether_addr(hdr->addr1)) {
- int len = min_t(int, tx->skb->len + FCS_LEN,
- tx->local->fragmentation_threshold);
- if (len > tx->local->rts_threshold
- && tx->local->rts_threshold <
- IEEE80211_MAX_RTS_THRESHOLD) {
- info->flags |= IEEE80211_TX_CTL_USE_RTS_CTS;
- info->flags |=
- IEEE80211_TX_CTL_LONG_RETRY_LIMIT;
- info->control.retry_limit =
- tx->local->hw.conf.long_frame_max_tx_count - 1;
- } else {
- info->control.retry_limit =
- tx->local->hw.conf.short_frame_max_tx_count - 1;
- }
- } else {
- info->control.retry_limit = 1;
- }
- }
-
- if (tx->flags & IEEE80211_TX_FRAGMENTED) {
- /* Do not use multiple retry rates when sending fragmented
- * frames.
- * TODO: The last fragment could still use multiple retry
- * rates. */
- info->control.retries[0].rate_idx = -1;
- }
-
- /* Use CTS protection for unicast frames sent using extended rates if
- * there are associated non-ERP stations and RTS/CTS is not configured
- * for the frame. */
- if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) &&
- (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) &&
- (tx->flags & IEEE80211_TX_UNICAST) &&
- tx->sdata->vif.bss_conf.use_cts_prot &&
- !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS))
- info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT;
-
- /* Transmit data frames using short preambles if the driver supports
- * short preambles at the selected rate and short preambles are
- * available on the network at the current point in time. */
- if (ieee80211_is_data(hdr->frame_control) &&
- (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) &&
- tx->sdata->vif.bss_conf.use_short_preamble &&
- (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) {
- info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
- }
-
- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
- struct ieee80211_rate *rate;
- s8 baserate = -1;
- int idx;
-
- /* Do not use multiple retry rates when using RTS/CTS */
- info->control.retries[0].rate_idx = -1;
-
- /* Use min(data rate, max base rate) as CTS/RTS rate */
- rate = &sband->bitrates[tx->rate_idx];
-
- for (idx = 0; idx < sband->n_bitrates; idx++) {
- if (sband->bitrates[idx].bitrate > rate->bitrate)
- continue;
- if (tx->sdata->vif.bss_conf.basic_rates & BIT(idx) &&
- (baserate < 0 ||
- (sband->bitrates[baserate].bitrate
- < sband->bitrates[idx].bitrate)))
- baserate = idx;
- }
-
- if (baserate >= 0)
- info->control.rts_cts_rate_idx = baserate;
- else
- info->control.rts_cts_rate_idx = 0;
- }
if (tx->sta)
info->control.sta = &tx->sta->sta;
@@ -678,6 +699,7 @@
left = payload_len - per_fragm;
for (i = 0; i < num_fragm - 1; i++) {
struct ieee80211_hdr *fhdr;
+ struct ieee80211_tx_info *info;
size_t copylen;
if (left <= 0)
@@ -692,20 +714,45 @@
IEEE80211_ENCRYPT_TAILROOM);
if (!frag)
goto fail;
+
/* Make sure that all fragments use the same priority so
* that they end up using the same TX queue */
frag->priority = first->priority;
+
skb_reserve(frag, tx->local->tx_headroom +
IEEE80211_ENCRYPT_HEADROOM);
+
+ /* copy TX information */
+ info = IEEE80211_SKB_CB(frag);
+ memcpy(info, first->cb, sizeof(frag->cb));
+
+ /* copy/fill in 802.11 header */
fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen);
memcpy(fhdr, first->data, hdrlen);
- if (i == num_fragm - 2)
- fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS);
fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG));
+
+ if (i == num_fragm - 2) {
+ /* clear MOREFRAGS bit for the last fragment */
+ fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS);
+ } else {
+ /*
+ * No multi-rate retries for fragmented frames, that
+ * would completely throw off the NAV at other STAs.
+ */
+ info->control.rates[1].idx = -1;
+ info->control.rates[2].idx = -1;
+ info->control.rates[3].idx = -1;
+ info->control.rates[4].idx = -1;
+ BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5);
+ info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
+ }
+
+ /* copy data */
copylen = left > per_fragm ? per_fragm : left;
memcpy(skb_put(frag, copylen), pos, copylen);
- memcpy(frag->cb, first->cb, sizeof(frag->cb));
+
skb_copy_queue_mapping(frag, first);
+
frag->do_not_encrypt = first->do_not_encrypt;
pos += copylen;
@@ -765,12 +812,10 @@
tx->extra_frag[0]->len);
for (i = 0; i < tx->num_extra_frag; i++) {
- if (i + 1 < tx->num_extra_frag) {
+ if (i + 1 < tx->num_extra_frag)
next_len = tx->extra_frag[i + 1]->len;
- } else {
+ else
next_len = 0;
- tx->rate_idx = tx->last_frag_rate_idx;
- }
hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data;
hdr->duration_id = ieee80211_duration(tx, 0, next_len);
@@ -823,7 +868,6 @@
(struct ieee80211_radiotap_header *) skb->data;
struct ieee80211_supported_band *sband;
int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len);
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
sband = tx->local->hw.wiphy->bands[tx->channel->band];
@@ -837,8 +881,6 @@
*/
while (!ret) {
- int i, target_rate;
-
ret = ieee80211_radiotap_iterator_next(&iterator);
if (ret)
@@ -852,38 +894,6 @@
* get_unaligned((type *)iterator.this_arg) to dereference
* iterator.this_arg for type "type" safely on all arches.
*/
- case IEEE80211_RADIOTAP_RATE:
- /*
- * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps
- * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps
- */
- target_rate = (*iterator.this_arg) * 5;
- for (i = 0; i < sband->n_bitrates; i++) {
- struct ieee80211_rate *r;
-
- r = &sband->bitrates[i];
-
- if (r->bitrate == target_rate) {
- tx->rate_idx = i;
- break;
- }
- }
- break;
-
- case IEEE80211_RADIOTAP_ANTENNA:
- /*
- * radiotap uses 0 for 1st ant, mac80211 is 1 for
- * 1st ant
- */
- info->antenna_sel_tx = (*iterator.this_arg) + 1;
- break;
-
-#if 0
- case IEEE80211_RADIOTAP_DBM_TX_POWER:
- control->power_level = *iterator.this_arg;
- break;
-#endif
-
case IEEE80211_RADIOTAP_FLAGS:
if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) {
/*
@@ -949,8 +959,6 @@
tx->local = local;
tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev);
tx->channel = local->hw.conf.channel;
- tx->rate_idx = -1;
- tx->last_frag_rate_idx = -1;
/*
* Set this flag (used below to indicate "automatic fragmentation"),
* it will be cleared/left by radiotap as desired.
@@ -1051,23 +1059,11 @@
if (!tx->extra_frag[i])
continue;
info = IEEE80211_SKB_CB(tx->extra_frag[i]);
- info->flags &= ~(IEEE80211_TX_CTL_USE_RTS_CTS |
- IEEE80211_TX_CTL_USE_CTS_PROTECT |
- IEEE80211_TX_CTL_CLEAR_PS_FILT |
+ info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT |
IEEE80211_TX_CTL_FIRST_FRAGMENT);
if (netif_subqueue_stopped(local->mdev,
tx->extra_frag[i]))
return IEEE80211_TX_FRAG_AGAIN;
- if (i == tx->num_extra_frag) {
- info->tx_rate_idx = tx->last_frag_rate_idx;
-
- if (tx->flags & IEEE80211_TX_PROBE_LAST_FRAG)
- info->flags |=
- IEEE80211_TX_CTL_RATE_CTRL_PROBE;
- else
- info->flags &=
- ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
- }
ret = local->ops->tx(local_to_hw(local),
tx->extra_frag[i]);
@@ -1204,9 +1200,6 @@
store->skb = skb;
store->extra_frag = tx.extra_frag;
store->num_extra_frag = tx.num_extra_frag;
- store->last_frag_rate_idx = tx.last_frag_rate_idx;
- store->last_frag_rate_ctrl_probe =
- !!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG);
}
out:
rcu_read_unlock();
@@ -1763,10 +1756,7 @@
store = &local->pending_packet[i];
tx.extra_frag = store->extra_frag;
tx.num_extra_frag = store->num_extra_frag;
- tx.last_frag_rate_idx = store->last_frag_rate_idx;
tx.flags = 0;
- if (store->last_frag_rate_ctrl_probe)
- tx.flags |= IEEE80211_TX_PROBE_LAST_FRAG;
ret = __ieee80211_tx(local, store->skb, &tx);
if (ret) {
if (ret == IEEE80211_TX_FRAG_AGAIN)
@@ -1854,7 +1844,6 @@
struct ieee80211_sub_if_data *sdata = NULL;
struct ieee80211_if_ap *ap = NULL;
struct ieee80211_if_sta *ifsta = NULL;
- struct rate_selection rsel;
struct beacon_data *beacon;
struct ieee80211_supported_band *sband;
enum ieee80211_band band = local->hw.conf.channel->band;
@@ -1958,32 +1947,23 @@
skb->do_not_encrypt = 1;
info->band = band;
- rate_control_get_rate(sdata, sband, NULL, skb, &rsel);
-
- if (unlikely(rsel.rate_idx < 0)) {
- if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: ieee80211_beacon_get: "
- "no rate found\n",
- wiphy_name(local->hw.wiphy));
- }
- dev_kfree_skb_any(skb);
- skb = NULL;
- goto out;
- }
+ /*
+ * XXX: For now, always use the lowest rate
+ */
+ info->control.rates[0].idx = 0;
+ info->control.rates[0].count = 1;
+ info->control.rates[1].idx = -1;
+ info->control.rates[2].idx = -1;
+ info->control.rates[3].idx = -1;
+ info->control.rates[4].idx = -1;
+ BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 5);
info->control.vif = vif;
- info->tx_rate_idx = rsel.rate_idx;
info->flags |= IEEE80211_TX_CTL_NO_ACK;
info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
- if (sdata->vif.bss_conf.use_short_preamble &&
- sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
- info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
-
- info->control.retry_limit = 1;
-
-out:
+ out:
rcu_read_unlock();
return skb;
}
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index f7e442f..31d2e74 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -636,8 +636,8 @@
sta = sta_info_get(local, sdata->u.sta.bssid);
- if (sta && sta->last_txrate_idx < sband->n_bitrates)
- rate->value = sband->bitrates[sta->last_txrate_idx].bitrate;
+ if (sta && !(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS))
+ rate->value = sband->bitrates[sta->last_tx_rate.idx].bitrate;
else
rate->value = 0;