ARM: OMAP1: Misc clean-up
This patch cleans up omap1 files to sync up with linux-omap tree:
- Remove omap-generic MMC config as it should be defined in board-*.c files
instead of using board-generic.c
- New style I2C board_info from David Brownell <dbrownell@users.sourceforge.net>
- Init section fixes from Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 00b7623..070345e 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,6 +37,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
+#include <asm/arch/gpio-switch.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/nand.h>
@@ -47,8 +48,6 @@
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
-extern int omap_gpio_init(void);
-
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -341,22 +340,6 @@
&h2_mcbsp1_device,
};
-#ifdef CONFIG_I2C_BOARDINFO
-static struct i2c_board_info __initdata h2_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("tps65010", 0x48),
- .type = "tps65010",
- .irq = OMAP_GPIO_IRQ(58),
- },
- /* TODO when driver support is ready:
- * - isp1301 OTG transceiver
- * - optional ov9640 camera sensor at 0x30
- * - pcf9754 for aGPS control
- * - ... etc
- */
-};
-#endif
-
static void __init h2_init_smc91x(void)
{
if ((omap_request_gpio(0)) < 0) {
@@ -365,6 +348,14 @@
}
}
+static struct i2c_board_info __initdata h2_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("isp1301_omap", 0x2d),
+ .type = "isp1301_omap",
+ .irq = OMAP_GPIO_IRQ(2),
+ },
+};
+
static void __init h2_init_irq(void)
{
omap1_init_common_hw();
@@ -461,11 +452,6 @@
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
h2_mmc_init();
-
- /* irq for tps65010 chip */
- omap_cfg_reg(W4_GPIO58);
- if (gpio_request(58, "tps65010") == 0)
- gpio_direction_input(58);
}
static void __init h2_map_io(void)
@@ -473,22 +459,6 @@
omap1_map_common_io();
}
-#ifdef CONFIG_TPS65010
-static int __init h2_tps_init(void)
-{
- if (!machine_is_omap_h2())
- return 0;
-
- /* gpio3 for SD, gpio4 for VDD_DSP */
- /* FIXME send power to DSP iff it's configured */
-
- /* Enable LOW_PWR */
- tps65010_set_low_pwr(ON);
- return 0;
-}
-fs_initcall(h2_tps_init);
-#endif
-
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
.phys_io = 0xfff00000,