| /****************************************************************************** |
| * |
| * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * James P. Ketrenos <ipw2100-admin@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| *****************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/version.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/skbuff.h> |
| #include <linux/netdevice.h> |
| #include <linux/wireless.h> |
| #include <net/mac80211.h> |
| #include <linux/etherdevice.h> |
| #include <asm/unaligned.h> |
| |
| #include "iwl-eeprom.h" |
| #include "iwl-dev.h" |
| #include "iwl-core.h" |
| #include "iwl-io.h" |
| #include "iwl-helpers.h" |
| #include "iwl-calib.h" |
| |
| /* module parameters */ |
| static struct iwl_mod_params iwl4965_mod_params = { |
| .num_of_queues = IWL49_NUM_QUEUES, |
| .enable_qos = 1, |
| .amsdu_size_8K = 1, |
| .restart_fw = 1, |
| /* the rest are 0 by default */ |
| }; |
| |
| #ifdef CONFIG_IWL4965_HT |
| |
| static const u16 default_tid_to_tx_fifo[] = { |
| IWL_TX_FIFO_AC1, |
| IWL_TX_FIFO_AC0, |
| IWL_TX_FIFO_AC0, |
| IWL_TX_FIFO_AC1, |
| IWL_TX_FIFO_AC2, |
| IWL_TX_FIFO_AC2, |
| IWL_TX_FIFO_AC3, |
| IWL_TX_FIFO_AC3, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_NONE, |
| IWL_TX_FIFO_AC3 |
| }; |
| |
| #endif /*CONFIG_IWL4965_HT */ |
| |
| /* check contents of special bootstrap uCode SRAM */ |
| static int iwl4965_verify_bsm(struct iwl_priv *priv) |
| { |
| __le32 *image = priv->ucode_boot.v_addr; |
| u32 len = priv->ucode_boot.len; |
| u32 reg; |
| u32 val; |
| |
| IWL_DEBUG_INFO("Begin verify bsm\n"); |
| |
| /* verify BSM SRAM contents */ |
| val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG); |
| for (reg = BSM_SRAM_LOWER_BOUND; |
| reg < BSM_SRAM_LOWER_BOUND + len; |
| reg += sizeof(u32), image++) { |
| val = iwl_read_prph(priv, reg); |
| if (val != le32_to_cpu(*image)) { |
| IWL_ERROR("BSM uCode verification failed at " |
| "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", |
| BSM_SRAM_LOWER_BOUND, |
| reg - BSM_SRAM_LOWER_BOUND, len, |
| val, le32_to_cpu(*image)); |
| return -EIO; |
| } |
| } |
| |
| IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n"); |
| |
| return 0; |
| } |
| |
| /** |
| * iwl4965_load_bsm - Load bootstrap instructions |
| * |
| * BSM operation: |
| * |
| * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program |
| * in special SRAM that does not power down during RFKILL. When powering back |
| * up after power-saving sleeps (or during initial uCode load), the BSM loads |
| * the bootstrap program into the on-board processor, and starts it. |
| * |
| * The bootstrap program loads (via DMA) instructions and data for a new |
| * program from host DRAM locations indicated by the host driver in the |
| * BSM_DRAM_* registers. Once the new program is loaded, it starts |
| * automatically. |
| * |
| * When initializing the NIC, the host driver points the BSM to the |
| * "initialize" uCode image. This uCode sets up some internal data, then |
| * notifies host via "initialize alive" that it is complete. |
| * |
| * The host then replaces the BSM_DRAM_* pointer values to point to the |
| * normal runtime uCode instructions and a backup uCode data cache buffer |
| * (filled initially with starting data values for the on-board processor), |
| * then triggers the "initialize" uCode to load and launch the runtime uCode, |
| * which begins normal operation. |
| * |
| * When doing a power-save shutdown, runtime uCode saves data SRAM into |
| * the backup data cache in DRAM before SRAM is powered down. |
| * |
| * When powering back up, the BSM loads the bootstrap program. This reloads |
| * the runtime uCode instructions and the backup data cache into SRAM, |
| * and re-launches the runtime uCode from where it left off. |
| */ |
| static int iwl4965_load_bsm(struct iwl_priv *priv) |
| { |
| __le32 *image = priv->ucode_boot.v_addr; |
| u32 len = priv->ucode_boot.len; |
| dma_addr_t pinst; |
| dma_addr_t pdata; |
| u32 inst_len; |
| u32 data_len; |
| int i; |
| u32 done; |
| u32 reg_offset; |
| int ret; |
| |
| IWL_DEBUG_INFO("Begin load bsm\n"); |
| |
| /* make sure bootstrap program is no larger than BSM's SRAM size */ |
| if (len > IWL_MAX_BSM_SIZE) |
| return -EINVAL; |
| |
| /* Tell bootstrap uCode where to find the "Initialize" uCode |
| * in host DRAM ... host DRAM physical address bits 35:4 for 4965. |
| * NOTE: iwl4965_initialize_alive_start() will replace these values, |
| * after the "initialize" uCode has run, to point to |
| * runtime/protocol instructions and backup data cache. */ |
| pinst = priv->ucode_init.p_addr >> 4; |
| pdata = priv->ucode_init_data.p_addr >> 4; |
| inst_len = priv->ucode_init.len; |
| data_len = priv->ucode_init_data.len; |
| |
| ret = iwl_grab_nic_access(priv); |
| if (ret) |
| return ret; |
| |
| iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); |
| iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); |
| iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); |
| iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); |
| |
| /* Fill BSM memory with bootstrap instructions */ |
| for (reg_offset = BSM_SRAM_LOWER_BOUND; |
| reg_offset < BSM_SRAM_LOWER_BOUND + len; |
| reg_offset += sizeof(u32), image++) |
| _iwl_write_prph(priv, reg_offset, le32_to_cpu(*image)); |
| |
| ret = iwl4965_verify_bsm(priv); |
| if (ret) { |
| iwl_release_nic_access(priv); |
| return ret; |
| } |
| |
| /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ |
| iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); |
| iwl_write_prph(priv, BSM_WR_MEM_DST_REG, RTC_INST_LOWER_BOUND); |
| iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); |
| |
| /* Load bootstrap code into instruction SRAM now, |
| * to prepare to load "initialize" uCode */ |
| iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); |
| |
| /* Wait for load of bootstrap uCode to finish */ |
| for (i = 0; i < 100; i++) { |
| done = iwl_read_prph(priv, BSM_WR_CTRL_REG); |
| if (!(done & BSM_WR_CTRL_REG_BIT_START)) |
| break; |
| udelay(10); |
| } |
| if (i < 100) |
| IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i); |
| else { |
| IWL_ERROR("BSM write did not complete!\n"); |
| return -EIO; |
| } |
| |
| /* Enable future boot loads whenever power management unit triggers it |
| * (e.g. when powering back up after power-save shutdown) */ |
| iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); |
| |
| iwl_release_nic_access(priv); |
| |
| return 0; |
| } |
| |
| /** |
| * iwl4965_set_ucode_ptrs - Set uCode address location |
| * |
| * Tell initialization uCode where to find runtime uCode. |
| * |
| * BSM registers initially contain pointers to initialization uCode. |
| * We need to replace them to load runtime uCode inst and data, |
| * and to save runtime data when powering down. |
| */ |
| static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) |
| { |
| dma_addr_t pinst; |
| dma_addr_t pdata; |
| unsigned long flags; |
| int ret = 0; |
| |
| /* bits 35:4 for 4965 */ |
| pinst = priv->ucode_code.p_addr >> 4; |
| pdata = priv->ucode_data_backup.p_addr >> 4; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| ret = iwl_grab_nic_access(priv); |
| if (ret) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return ret; |
| } |
| |
| /* Tell bootstrap uCode where to find image to load */ |
| iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); |
| iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); |
| iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, |
| priv->ucode_data.len); |
| |
| /* Inst bytecount must be last to set up, bit 31 signals uCode |
| * that all new ptr/size info is in place */ |
| iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, |
| priv->ucode_code.len | BSM_DRAM_INST_LOAD); |
| iwl_release_nic_access(priv); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| IWL_DEBUG_INFO("Runtime uCode pointers are set.\n"); |
| |
| return ret; |
| } |
| |
| /** |
| * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received |
| * |
| * Called after REPLY_ALIVE notification received from "initialize" uCode. |
| * |
| * The 4965 "initialize" ALIVE reply contains calibration data for: |
| * Voltage, temperature, and MIMO tx gain correction, now stored in priv |
| * (3945 does not contain this data). |
| * |
| * Tell "initialize" uCode to go ahead and load the runtime uCode. |
| */ |
| static void iwl4965_init_alive_start(struct iwl_priv *priv) |
| { |
| /* Check alive response for "valid" sign from uCode */ |
| if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { |
| /* We had an error bringing up the hardware, so take it |
| * all the way back down so we can try again */ |
| IWL_DEBUG_INFO("Initialize Alive failed.\n"); |
| goto restart; |
| } |
| |
| /* Bootstrap uCode has loaded initialize uCode ... verify inst image. |
| * This is a paranoid check, because we would not have gotten the |
| * "initialize" alive if code weren't properly loaded. */ |
| if (iwl_verify_ucode(priv)) { |
| /* Runtime instruction load was bad; |
| * take it all the way back down so we can try again */ |
| IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); |
| goto restart; |
| } |
| |
| /* Calculate temperature */ |
| priv->temperature = iwl4965_get_temperature(priv); |
| |
| /* Send pointers to protocol/runtime uCode image ... init code will |
| * load and launch runtime uCode, which will send us another "Alive" |
| * notification. */ |
| IWL_DEBUG_INFO("Initialization Alive received.\n"); |
| if (iwl4965_set_ucode_ptrs(priv)) { |
| /* Runtime instruction load won't happen; |
| * take it all the way back down so we can try again */ |
| IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n"); |
| goto restart; |
| } |
| return; |
| |
| restart: |
| queue_work(priv->workqueue, &priv->restart); |
| } |
| |
| static int is_fat_channel(__le32 rxon_flags) |
| { |
| return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) || |
| (rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK); |
| } |
| |
| int iwl4965_hwrate_to_plcp_idx(u32 rate_n_flags) |
| { |
| int idx = 0; |
| |
| /* 4965 HT rate format */ |
| if (rate_n_flags & RATE_MCS_HT_MSK) { |
| idx = (rate_n_flags & 0xff); |
| |
| if (idx >= IWL_RATE_MIMO2_6M_PLCP) |
| idx = idx - IWL_RATE_MIMO2_6M_PLCP; |
| |
| idx += IWL_FIRST_OFDM_RATE; |
| /* skip 9M not supported in ht*/ |
| if (idx >= IWL_RATE_9M_INDEX) |
| idx += 1; |
| if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) |
| return idx; |
| |
| /* 4965 legacy rate format, search for match in table */ |
| } else { |
| for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) |
| if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) |
| return idx; |
| } |
| |
| return -1; |
| } |
| |
| /** |
| * translate ucode response to mac80211 tx status control values |
| */ |
| void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, |
| struct ieee80211_tx_info *control) |
| { |
| int rate_index; |
| |
| control->antenna_sel_tx = |
| ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); |
| if (rate_n_flags & RATE_MCS_HT_MSK) |
| control->flags |= IEEE80211_TX_CTL_OFDM_HT; |
| if (rate_n_flags & RATE_MCS_GF_MSK) |
| control->flags |= IEEE80211_TX_CTL_GREEN_FIELD; |
| if (rate_n_flags & RATE_MCS_FAT_MSK) |
| control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH; |
| if (rate_n_flags & RATE_MCS_DUP_MSK) |
| control->flags |= IEEE80211_TX_CTL_DUP_DATA; |
| if (rate_n_flags & RATE_MCS_SGI_MSK) |
| control->flags |= IEEE80211_TX_CTL_SHORT_GI; |
| rate_index = iwl4965_hwrate_to_plcp_idx(rate_n_flags); |
| if (control->band == IEEE80211_BAND_5GHZ) |
| rate_index -= IWL_FIRST_OFDM_RATE; |
| control->tx_rate_idx = rate_index; |
| } |
| |
| int iwl4965_hw_rxq_stop(struct iwl_priv *priv) |
| { |
| int rc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| rc = iwl_grab_nic_access(priv); |
| if (rc) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return rc; |
| } |
| |
| /* stop Rx DMA */ |
| iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); |
| rc = iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, |
| (1 << 24), 1000); |
| if (rc < 0) |
| IWL_ERROR("Can't stop Rx DMA.\n"); |
| |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * EEPROM handlers |
| */ |
| |
| static int iwl4965_eeprom_check_version(struct iwl_priv *priv) |
| { |
| u16 eeprom_ver; |
| u16 calib_ver; |
| |
| eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION); |
| |
| calib_ver = iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET); |
| |
| if (eeprom_ver < EEPROM_4965_EEPROM_VERSION || |
| calib_ver < EEPROM_4965_TX_POWER_VERSION) |
| goto err; |
| |
| return 0; |
| err: |
| IWL_ERROR("Unsuported EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n", |
| eeprom_ver, EEPROM_4965_EEPROM_VERSION, |
| calib_ver, EEPROM_4965_TX_POWER_VERSION); |
| return -EINVAL; |
| |
| } |
| int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) |
| { |
| int ret; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| ret = iwl_grab_nic_access(priv); |
| if (ret) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return ret; |
| } |
| |
| if (src == IWL_PWR_SRC_VAUX) { |
| u32 val; |
| ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, |
| &val); |
| |
| if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) { |
| iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, |
| APMG_PS_CTRL_VAL_PWR_SRC_VAUX, |
| ~APMG_PS_CTRL_MSK_PWR_SRC); |
| } |
| } else { |
| iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, |
| APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, |
| ~APMG_PS_CTRL_MSK_PWR_SRC); |
| } |
| |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return ret; |
| } |
| |
| static int iwl4965_disable_tx_fifo(struct iwl_priv *priv) |
| { |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| ret = iwl_grab_nic_access(priv); |
| if (unlikely(ret)) { |
| IWL_ERROR("Tx fifo reset failed"); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return ret; |
| } |
| |
| iwl_write_prph(priv, IWL49_SCD_TXFACT, 0); |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| static int iwl4965_apm_init(struct iwl_priv *priv) |
| { |
| int ret = 0; |
| |
| iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, |
| CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); |
| |
| /* set "initialization complete" bit to move adapter |
| * D0U* --> D0A* state */ |
| iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); |
| |
| /* wait for clock stabilization */ |
| ret = iwl_poll_bit(priv, CSR_GP_CNTRL, |
| CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, |
| CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); |
| if (ret < 0) { |
| IWL_DEBUG_INFO("Failed to init the card\n"); |
| goto out; |
| } |
| |
| ret = iwl_grab_nic_access(priv); |
| if (ret) |
| goto out; |
| |
| /* enable DMA */ |
| iwl_write_prph(priv, APMG_CLK_CTRL_REG, |
| APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); |
| |
| udelay(20); |
| |
| iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, |
| APMG_PCIDEV_STT_VAL_L1_ACT_DIS); |
| |
| iwl_release_nic_access(priv); |
| out: |
| return ret; |
| } |
| |
| |
| static void iwl4965_nic_config(struct iwl_priv *priv) |
| { |
| unsigned long flags; |
| u32 val; |
| u16 radio_cfg; |
| u8 val_link; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| if ((priv->rev_id & 0x80) == 0x80 && (priv->rev_id & 0x7f) < 8) { |
| pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val); |
| /* Enable No Snoop field */ |
| pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8, |
| val & ~(1 << 11)); |
| } |
| |
| pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link); |
| |
| /* disable L1 entry -- workaround for pre-B1 */ |
| pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02); |
| |
| radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); |
| |
| /* write radio config values to register */ |
| if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX) |
| iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
| EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | |
| EEPROM_RF_CFG_STEP_MSK(radio_cfg) | |
| EEPROM_RF_CFG_DASH_MSK(radio_cfg)); |
| |
| /* set CSR_HW_CONFIG_REG for uCode use */ |
| iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, |
| CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | |
| CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); |
| |
| priv->calib_info = (struct iwl_eeprom_calib_info *) |
| iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| int iwl4965_hw_nic_stop_master(struct iwl_priv *priv) |
| { |
| int rc = 0; |
| u32 reg_val; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| /* set stop master bit */ |
| iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); |
| |
| reg_val = iwl_read32(priv, CSR_GP_CNTRL); |
| |
| if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE == |
| (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE)) |
| IWL_DEBUG_INFO("Card in power save, master is already " |
| "stopped\n"); |
| else { |
| rc = iwl_poll_bit(priv, CSR_RESET, |
| CSR_RESET_REG_FLAG_MASTER_DISABLED, |
| CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); |
| if (rc < 0) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return rc; |
| } |
| } |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| IWL_DEBUG_INFO("stop master\n"); |
| |
| return rc; |
| } |
| |
| /** |
| * iwl4965_hw_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory |
| */ |
| void iwl4965_hw_txq_ctx_stop(struct iwl_priv *priv) |
| { |
| |
| int txq_id; |
| unsigned long flags; |
| |
| /* Stop each Tx DMA channel, and wait for it to be idle */ |
| for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) { |
| spin_lock_irqsave(&priv->lock, flags); |
| if (iwl_grab_nic_access(priv)) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| continue; |
| } |
| |
| iwl_write_direct32(priv, |
| FH_TCSR_CHNL_TX_CONFIG_REG(txq_id), 0x0); |
| iwl_poll_direct_bit(priv, FH_TSSR_TX_STATUS_REG, |
| FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE |
| (txq_id), 200); |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| } |
| |
| /* Deallocate memory for all Tx queues */ |
| iwl_hw_txq_ctx_free(priv); |
| } |
| |
| int iwl4965_hw_nic_reset(struct iwl_priv *priv) |
| { |
| int rc = 0; |
| unsigned long flags; |
| |
| iwl4965_hw_nic_stop_master(priv); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); |
| |
| udelay(10); |
| |
| iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); |
| rc = iwl_poll_bit(priv, CSR_RESET, |
| CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, |
| CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25); |
| |
| udelay(10); |
| |
| rc = iwl_grab_nic_access(priv); |
| if (!rc) { |
| iwl_write_prph(priv, APMG_CLK_EN_REG, |
| APMG_CLK_VAL_DMA_CLK_RQT | |
| APMG_CLK_VAL_BSM_CLK_RQT); |
| |
| udelay(10); |
| |
| iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, |
| APMG_PCIDEV_STT_VAL_L1_ACT_DIS); |
| |
| iwl_release_nic_access(priv); |
| } |
| |
| clear_bit(STATUS_HCMD_ACTIVE, &priv->status); |
| wake_up_interruptible(&priv->wait_command_queue); |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return rc; |
| |
| } |
| |
| #define REG_RECALIB_PERIOD (60) |
| |
| /** |
| * iwl4965_bg_statistics_periodic - Timer callback to queue statistics |
| * |
| * This callback is provided in order to send a statistics request. |
| * |
| * This timer function is continually reset to execute within |
| * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION |
| * was received. We need to ensure we receive the statistics in order |
| * to update the temperature used for calibrating the TXPOWER. |
| */ |
| static void iwl4965_bg_statistics_periodic(unsigned long data) |
| { |
| struct iwl_priv *priv = (struct iwl_priv *)data; |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status)) |
| return; |
| |
| iwl_send_statistics_request(priv, CMD_ASYNC); |
| } |
| |
| void iwl4965_rf_kill_ct_config(struct iwl_priv *priv) |
| { |
| struct iwl4965_ct_kill_config cmd; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, |
| CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| cmd.critical_temperature_R = |
| cpu_to_le32(priv->hw_params.ct_kill_threshold); |
| |
| ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, |
| sizeof(cmd), &cmd); |
| if (ret) |
| IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n"); |
| else |
| IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, " |
| "critical temperature is %d\n", |
| cmd.critical_temperature_R); |
| } |
| |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| |
| /* Reset differential Rx gains in NIC to prepare for chain noise calibration. |
| * Called after every association, but this runs only once! |
| * ... once chain noise is calibrated the first time, it's good forever. */ |
| static void iwl4965_chain_noise_reset(struct iwl_priv *priv) |
| { |
| struct iwl_chain_noise_data *data = &(priv->chain_noise_data); |
| |
| if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) { |
| struct iwl4965_calibration_cmd cmd; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD; |
| cmd.diff_gain_a = 0; |
| cmd.diff_gain_b = 0; |
| cmd.diff_gain_c = 0; |
| if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, |
| sizeof(cmd), &cmd)) |
| IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n"); |
| data->state = IWL_CHAIN_NOISE_ACCUMULATE; |
| IWL_DEBUG_CALIB("Run chain_noise_calibrate\n"); |
| } |
| } |
| |
| static void iwl4965_gain_computation(struct iwl_priv *priv, |
| u32 *average_noise, |
| u16 min_average_noise_antenna_i, |
| u32 min_average_noise) |
| { |
| int i, ret; |
| struct iwl_chain_noise_data *data = &priv->chain_noise_data; |
| |
| data->delta_gain_code[min_average_noise_antenna_i] = 0; |
| |
| for (i = 0; i < NUM_RX_CHAINS; i++) { |
| s32 delta_g = 0; |
| |
| if (!(data->disconn_array[i]) && |
| (data->delta_gain_code[i] == |
| CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) { |
| delta_g = average_noise[i] - min_average_noise; |
| data->delta_gain_code[i] = (u8)((delta_g * 10) / 15); |
| data->delta_gain_code[i] = |
| min(data->delta_gain_code[i], |
| (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); |
| |
| data->delta_gain_code[i] = |
| (data->delta_gain_code[i] | (1 << 2)); |
| } else { |
| data->delta_gain_code[i] = 0; |
| } |
| } |
| IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n", |
| data->delta_gain_code[0], |
| data->delta_gain_code[1], |
| data->delta_gain_code[2]); |
| |
| /* Differential gain gets sent to uCode only once */ |
| if (!data->radio_write) { |
| struct iwl4965_calibration_cmd cmd; |
| data->radio_write = 1; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD; |
| cmd.diff_gain_a = data->delta_gain_code[0]; |
| cmd.diff_gain_b = data->delta_gain_code[1]; |
| cmd.diff_gain_c = data->delta_gain_code[2]; |
| ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, |
| sizeof(cmd), &cmd); |
| if (ret) |
| IWL_DEBUG_CALIB("fail sending cmd " |
| "REPLY_PHY_CALIBRATION_CMD \n"); |
| |
| /* TODO we might want recalculate |
| * rx_chain in rxon cmd */ |
| |
| /* Mark so we run this algo only once! */ |
| data->state = IWL_CHAIN_NOISE_CALIBRATED; |
| } |
| data->chain_noise_a = 0; |
| data->chain_noise_b = 0; |
| data->chain_noise_c = 0; |
| data->chain_signal_a = 0; |
| data->chain_signal_b = 0; |
| data->chain_signal_c = 0; |
| data->beacon_count = 0; |
| } |
| |
| static void iwl4965_bg_sensitivity_work(struct work_struct *work) |
| { |
| struct iwl_priv *priv = container_of(work, struct iwl_priv, |
| sensitivity_work); |
| |
| mutex_lock(&priv->mutex); |
| |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status) || |
| test_bit(STATUS_SCANNING, &priv->status)) { |
| mutex_unlock(&priv->mutex); |
| return; |
| } |
| |
| if (priv->start_calib) { |
| iwl_chain_noise_calibration(priv, &priv->statistics); |
| |
| iwl_sensitivity_calibration(priv, &priv->statistics); |
| } |
| |
| mutex_unlock(&priv->mutex); |
| return; |
| } |
| #endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/ |
| |
| static void iwl4965_bg_txpower_work(struct work_struct *work) |
| { |
| struct iwl_priv *priv = container_of(work, struct iwl_priv, |
| txpower_work); |
| |
| /* If a scan happened to start before we got here |
| * then just return; the statistics notification will |
| * kick off another scheduled work to compensate for |
| * any temperature delta we missed here. */ |
| if (test_bit(STATUS_EXIT_PENDING, &priv->status) || |
| test_bit(STATUS_SCANNING, &priv->status)) |
| return; |
| |
| mutex_lock(&priv->mutex); |
| |
| /* Regardless of if we are assocaited, we must reconfigure the |
| * TX power since frames can be sent on non-radar channels while |
| * not associated */ |
| iwl4965_hw_reg_send_txpower(priv); |
| |
| /* Update last_temperature to keep is_calib_needed from running |
| * when it isn't needed... */ |
| priv->last_temperature = priv->temperature; |
| |
| mutex_unlock(&priv->mutex); |
| } |
| |
| /* |
| * Acquire priv->lock before calling this function ! |
| */ |
| static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index) |
| { |
| iwl_write_direct32(priv, HBUS_TARG_WRPTR, |
| (index & 0xff) | (txq_id << 8)); |
| iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index); |
| } |
| |
| /** |
| * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue |
| * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed |
| * @scd_retry: (1) Indicates queue will be used in aggregation mode |
| * |
| * NOTE: Acquire priv->lock before calling this function ! |
| */ |
| static void iwl4965_tx_queue_set_status(struct iwl_priv *priv, |
| struct iwl_tx_queue *txq, |
| int tx_fifo_id, int scd_retry) |
| { |
| int txq_id = txq->q.id; |
| |
| /* Find out whether to activate Tx queue */ |
| int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0; |
| |
| /* Set up and activate */ |
| iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id), |
| (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | |
| (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) | |
| (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) | |
| (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | |
| IWL49_SCD_QUEUE_STTS_REG_MSK); |
| |
| txq->sched_retry = scd_retry; |
| |
| IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n", |
| active ? "Activate" : "Deactivate", |
| scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); |
| } |
| |
| static const u16 default_queue_to_tx_fifo[] = { |
| IWL_TX_FIFO_AC3, |
| IWL_TX_FIFO_AC2, |
| IWL_TX_FIFO_AC1, |
| IWL_TX_FIFO_AC0, |
| IWL49_CMD_FIFO_NUM, |
| IWL_TX_FIFO_HCCA_1, |
| IWL_TX_FIFO_HCCA_2 |
| }; |
| |
| int iwl4965_alive_notify(struct iwl_priv *priv) |
| { |
| u32 a; |
| int i = 0; |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| memset(&(priv->sensitivity_data), 0, |
| sizeof(struct iwl_sensitivity_data)); |
| memset(&(priv->chain_noise_data), 0, |
| sizeof(struct iwl_chain_noise_data)); |
| for (i = 0; i < NUM_RX_CHAINS; i++) |
| priv->chain_noise_data.delta_gain_code[i] = |
| CHAIN_NOISE_DELTA_GAIN_INIT_VAL; |
| #endif /* CONFIG_IWL4965_RUN_TIME_CALIB*/ |
| ret = iwl_grab_nic_access(priv); |
| if (ret) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return ret; |
| } |
| |
| /* Clear 4965's internal Tx Scheduler data base */ |
| priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR); |
| a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET; |
| for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) |
| iwl_write_targ_mem(priv, a, 0); |
| for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) |
| iwl_write_targ_mem(priv, a, 0); |
| for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4) |
| iwl_write_targ_mem(priv, a, 0); |
| |
| /* Tel 4965 where to find Tx byte count tables */ |
| iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR, |
| (priv->shared_phys + |
| offsetof(struct iwl4965_shared, queues_byte_cnt_tbls)) >> 10); |
| |
| /* Disable chain mode for all queues */ |
| iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0); |
| |
| /* Initialize each Tx queue (including the command queue) */ |
| for (i = 0; i < priv->hw_params.max_txq_num; i++) { |
| |
| /* TFD circular buffer read/write indexes */ |
| iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0); |
| iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8)); |
| |
| /* Max Tx Window size for Scheduler-ACK mode */ |
| iwl_write_targ_mem(priv, priv->scd_base_addr + |
| IWL49_SCD_CONTEXT_QUEUE_OFFSET(i), |
| (SCD_WIN_SIZE << |
| IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & |
| IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); |
| |
| /* Frame limit */ |
| iwl_write_targ_mem(priv, priv->scd_base_addr + |
| IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) + |
| sizeof(u32), |
| (SCD_FRAME_LIMIT << |
| IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & |
| IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); |
| |
| } |
| iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK, |
| (1 << priv->hw_params.max_txq_num) - 1); |
| |
| /* Activate all Tx DMA/FIFO channels */ |
| iwl_write_prph(priv, IWL49_SCD_TXFACT, |
| SCD_TXFACT_REG_TXFIFO_MASK(0, 7)); |
| |
| iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0); |
| |
| /* Map each Tx/cmd queue to its corresponding fifo */ |
| for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { |
| int ac = default_queue_to_tx_fifo[i]; |
| iwl_txq_ctx_activate(priv, i); |
| iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0); |
| } |
| |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| /* Ask for statistics now, the uCode will send statistics notification |
| * periodically after association */ |
| iwl_send_statistics_request(priv, CMD_ASYNC); |
| return ret; |
| } |
| |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| static struct iwl_sensitivity_ranges iwl4965_sensitivity = { |
| .min_nrg_cck = 97, |
| .max_nrg_cck = 0, |
| |
| .auto_corr_min_ofdm = 85, |
| .auto_corr_min_ofdm_mrc = 170, |
| .auto_corr_min_ofdm_x1 = 105, |
| .auto_corr_min_ofdm_mrc_x1 = 220, |
| |
| .auto_corr_max_ofdm = 120, |
| .auto_corr_max_ofdm_mrc = 210, |
| .auto_corr_max_ofdm_x1 = 140, |
| .auto_corr_max_ofdm_mrc_x1 = 270, |
| |
| .auto_corr_min_cck = 125, |
| .auto_corr_max_cck = 200, |
| .auto_corr_min_cck_mrc = 200, |
| .auto_corr_max_cck_mrc = 400, |
| |
| .nrg_th_cck = 100, |
| .nrg_th_ofdm = 100, |
| }; |
| #endif |
| |
| /** |
| * iwl4965_hw_set_hw_params |
| * |
| * Called when initializing driver |
| */ |
| int iwl4965_hw_set_hw_params(struct iwl_priv *priv) |
| { |
| |
| if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) || |
| (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) { |
| IWL_ERROR("invalid queues_num, should be between %d and %d\n", |
| IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES); |
| return -EINVAL; |
| } |
| |
| priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues; |
| priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto; |
| priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; |
| priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; |
| if (priv->cfg->mod_params->amsdu_size_8K) |
| priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K; |
| else |
| priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K; |
| priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256; |
| priv->hw_params.max_stations = IWL4965_STATION_COUNT; |
| priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID; |
| |
| priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE; |
| priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE; |
| priv->hw_params.max_bsm_size = BSM_SRAM_SIZE; |
| priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ); |
| |
| priv->hw_params.tx_chains_num = 2; |
| priv->hw_params.rx_chains_num = 2; |
| priv->hw_params.valid_tx_ant = ANT_A | ANT_B; |
| priv->hw_params.valid_rx_ant = ANT_A | ANT_B; |
| priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD); |
| |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| priv->hw_params.sens = &iwl4965_sensitivity; |
| #endif |
| |
| return 0; |
| } |
| |
| /* set card power command */ |
| static int iwl4965_set_power(struct iwl_priv *priv, |
| void *cmd) |
| { |
| int ret = 0; |
| |
| ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD, |
| sizeof(struct iwl4965_powertable_cmd), |
| cmd, NULL); |
| return ret; |
| } |
| int iwl4965_hw_reg_set_txpower(struct iwl_priv *priv, s8 power) |
| { |
| IWL_ERROR("TODO: Implement iwl4965_hw_reg_set_txpower!\n"); |
| return -EINVAL; |
| } |
| |
| static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res) |
| { |
| s32 sign = 1; |
| |
| if (num < 0) { |
| sign = -sign; |
| num = -num; |
| } |
| if (denom < 0) { |
| sign = -sign; |
| denom = -denom; |
| } |
| *res = 1; |
| *res = ((num * 2 + denom) / (denom * 2)) * sign; |
| |
| return 1; |
| } |
| |
| /** |
| * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower |
| * |
| * Determines power supply voltage compensation for txpower calculations. |
| * Returns number of 1/2-dB steps to subtract from gain table index, |
| * to compensate for difference between power supply voltage during |
| * factory measurements, vs. current power supply voltage. |
| * |
| * Voltage indication is higher for lower voltage. |
| * Lower voltage requires more gain (lower gain table index). |
| */ |
| static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage, |
| s32 current_voltage) |
| { |
| s32 comp = 0; |
| |
| if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) || |
| (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage)) |
| return 0; |
| |
| iwl4965_math_div_round(current_voltage - eeprom_voltage, |
| TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp); |
| |
| if (current_voltage > eeprom_voltage) |
| comp *= 2; |
| if ((comp < -2) || (comp > 2)) |
| comp = 0; |
| |
| return comp; |
| } |
| |
| static const struct iwl_channel_info * |
| iwl4965_get_channel_txpower_info(struct iwl_priv *priv, |
| enum ieee80211_band band, u16 channel) |
| { |
| const struct iwl_channel_info *ch_info; |
| |
| ch_info = iwl_get_channel_info(priv, band, channel); |
| |
| if (!is_channel_valid(ch_info)) |
| return NULL; |
| |
| return ch_info; |
| } |
| |
| static s32 iwl4965_get_tx_atten_grp(u16 channel) |
| { |
| if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH && |
| channel <= CALIB_IWL_TX_ATTEN_GR5_LCH) |
| return CALIB_CH_GROUP_5; |
| |
| if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH && |
| channel <= CALIB_IWL_TX_ATTEN_GR1_LCH) |
| return CALIB_CH_GROUP_1; |
| |
| if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH && |
| channel <= CALIB_IWL_TX_ATTEN_GR2_LCH) |
| return CALIB_CH_GROUP_2; |
| |
| if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH && |
| channel <= CALIB_IWL_TX_ATTEN_GR3_LCH) |
| return CALIB_CH_GROUP_3; |
| |
| if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH && |
| channel <= CALIB_IWL_TX_ATTEN_GR4_LCH) |
| return CALIB_CH_GROUP_4; |
| |
| IWL_ERROR("Can't find txatten group for channel %d.\n", channel); |
| return -1; |
| } |
| |
| static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel) |
| { |
| s32 b = -1; |
| |
| for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) { |
| if (priv->calib_info->band_info[b].ch_from == 0) |
| continue; |
| |
| if ((channel >= priv->calib_info->band_info[b].ch_from) |
| && (channel <= priv->calib_info->band_info[b].ch_to)) |
| break; |
| } |
| |
| return b; |
| } |
| |
| static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) |
| { |
| s32 val; |
| |
| if (x2 == x1) |
| return y1; |
| else { |
| iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val); |
| return val + y2; |
| } |
| } |
| |
| /** |
| * iwl4965_interpolate_chan - Interpolate factory measurements for one channel |
| * |
| * Interpolates factory measurements from the two sample channels within a |
| * sub-band, to apply to channel of interest. Interpolation is proportional to |
| * differences in channel frequencies, which is proportional to differences |
| * in channel number. |
| */ |
| static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, |
| struct iwl_eeprom_calib_ch_info *chan_info) |
| { |
| s32 s = -1; |
| u32 c; |
| u32 m; |
| const struct iwl_eeprom_calib_measure *m1; |
| const struct iwl_eeprom_calib_measure *m2; |
| struct iwl_eeprom_calib_measure *omeas; |
| u32 ch_i1; |
| u32 ch_i2; |
| |
| s = iwl4965_get_sub_band(priv, channel); |
| if (s >= EEPROM_TX_POWER_BANDS) { |
| IWL_ERROR("Tx Power can not find channel %d ", channel); |
| return -1; |
| } |
| |
| ch_i1 = priv->calib_info->band_info[s].ch1.ch_num; |
| ch_i2 = priv->calib_info->band_info[s].ch2.ch_num; |
| chan_info->ch_num = (u8) channel; |
| |
| IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n", |
| channel, s, ch_i1, ch_i2); |
| |
| for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) { |
| for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) { |
| m1 = &(priv->calib_info->band_info[s].ch1. |
| measurements[c][m]); |
| m2 = &(priv->calib_info->band_info[s].ch2. |
| measurements[c][m]); |
| omeas = &(chan_info->measurements[c][m]); |
| |
| omeas->actual_pow = |
| (u8) iwl4965_interpolate_value(channel, ch_i1, |
| m1->actual_pow, |
| ch_i2, |
| m2->actual_pow); |
| omeas->gain_idx = |
| (u8) iwl4965_interpolate_value(channel, ch_i1, |
| m1->gain_idx, ch_i2, |
| m2->gain_idx); |
| omeas->temperature = |
| (u8) iwl4965_interpolate_value(channel, ch_i1, |
| m1->temperature, |
| ch_i2, |
| m2->temperature); |
| omeas->pa_det = |
| (s8) iwl4965_interpolate_value(channel, ch_i1, |
| m1->pa_det, ch_i2, |
| m2->pa_det); |
| |
| IWL_DEBUG_TXPOWER |
| ("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m, |
| m1->actual_pow, m2->actual_pow, omeas->actual_pow); |
| IWL_DEBUG_TXPOWER |
| ("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m, |
| m1->gain_idx, m2->gain_idx, omeas->gain_idx); |
| IWL_DEBUG_TXPOWER |
| ("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m, |
| m1->pa_det, m2->pa_det, omeas->pa_det); |
| IWL_DEBUG_TXPOWER |
| ("chain %d meas %d T1=%d T2=%d T=%d\n", c, m, |
| m1->temperature, m2->temperature, |
| omeas->temperature); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* bit-rate-dependent table to prevent Tx distortion, in half-dB units, |
| * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */ |
| static s32 back_off_table[] = { |
| 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */ |
| 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */ |
| 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */ |
| 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */ |
| 10 /* CCK */ |
| }; |
| |
| /* Thermal compensation values for txpower for various frequency ranges ... |
| * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */ |
| static struct iwl4965_txpower_comp_entry { |
| s32 degrees_per_05db_a; |
| s32 degrees_per_05db_a_denom; |
| } tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = { |
| {9, 2}, /* group 0 5.2, ch 34-43 */ |
| {4, 1}, /* group 1 5.2, ch 44-70 */ |
| {4, 1}, /* group 2 5.2, ch 71-124 */ |
| {4, 1}, /* group 3 5.2, ch 125-200 */ |
| {3, 1} /* group 4 2.4, ch all */ |
| }; |
| |
| static s32 get_min_power_index(s32 rate_power_index, u32 band) |
| { |
| if (!band) { |
| if ((rate_power_index & 7) <= 4) |
| return MIN_TX_GAIN_INDEX_52GHZ_EXT; |
| } |
| return MIN_TX_GAIN_INDEX; |
| } |
| |
| struct gain_entry { |
| u8 dsp; |
| u8 radio; |
| }; |
| |
| static const struct gain_entry gain_table[2][108] = { |
| /* 5.2GHz power gain index table */ |
| { |
| {123, 0x3F}, /* highest txpower */ |
| {117, 0x3F}, |
| {110, 0x3F}, |
| {104, 0x3F}, |
| {98, 0x3F}, |
| {110, 0x3E}, |
| {104, 0x3E}, |
| {98, 0x3E}, |
| {110, 0x3D}, |
| {104, 0x3D}, |
| {98, 0x3D}, |
| {110, 0x3C}, |
| {104, 0x3C}, |
| {98, 0x3C}, |
| {110, 0x3B}, |
| {104, 0x3B}, |
| {98, 0x3B}, |
| {110, 0x3A}, |
| {104, 0x3A}, |
| {98, 0x3A}, |
| {110, 0x39}, |
| {104, 0x39}, |
| {98, 0x39}, |
| {110, 0x38}, |
| {104, 0x38}, |
| {98, 0x38}, |
| {110, 0x37}, |
| {104, 0x37}, |
| {98, 0x37}, |
| {110, 0x36}, |
| {104, 0x36}, |
| {98, 0x36}, |
| {110, 0x35}, |
| {104, 0x35}, |
| {98, 0x35}, |
| {110, 0x34}, |
| {104, 0x34}, |
| {98, 0x34}, |
| {110, 0x33}, |
| {104, 0x33}, |
| {98, 0x33}, |
| {110, 0x32}, |
| {104, 0x32}, |
| {98, 0x32}, |
| {110, 0x31}, |
| {104, 0x31}, |
| {98, 0x31}, |
| {110, 0x30}, |
| {104, 0x30}, |
| {98, 0x30}, |
| {110, 0x25}, |
| {104, 0x25}, |
| {98, 0x25}, |
| {110, 0x24}, |
| {104, 0x24}, |
| {98, 0x24}, |
| {110, 0x23}, |
| {104, 0x23}, |
| {98, 0x23}, |
| {110, 0x22}, |
| {104, 0x18}, |
| {98, 0x18}, |
| {110, 0x17}, |
| {104, 0x17}, |
| {98, 0x17}, |
| {110, 0x16}, |
| {104, 0x16}, |
| {98, 0x16}, |
| {110, 0x15}, |
| {104, 0x15}, |
| {98, 0x15}, |
| {110, 0x14}, |
| {104, 0x14}, |
| {98, 0x14}, |
| {110, 0x13}, |
| {104, 0x13}, |
| {98, 0x13}, |
| {110, 0x12}, |
| {104, 0x08}, |
| {98, 0x08}, |
| {110, 0x07}, |
| {104, 0x07}, |
| {98, 0x07}, |
| {110, 0x06}, |
| {104, 0x06}, |
| {98, 0x06}, |
| {110, 0x05}, |
| {104, 0x05}, |
| {98, 0x05}, |
| {110, 0x04}, |
| {104, 0x04}, |
| {98, 0x04}, |
| {110, 0x03}, |
| {104, 0x03}, |
| {98, 0x03}, |
| {110, 0x02}, |
| {104, 0x02}, |
| {98, 0x02}, |
| {110, 0x01}, |
| {104, 0x01}, |
| {98, 0x01}, |
| {110, 0x00}, |
| {104, 0x00}, |
| {98, 0x00}, |
| {93, 0x00}, |
| {88, 0x00}, |
| {83, 0x00}, |
| {78, 0x00}, |
| }, |
| /* 2.4GHz power gain index table */ |
| { |
| {110, 0x3f}, /* highest txpower */ |
| {104, 0x3f}, |
| {98, 0x3f}, |
| {110, 0x3e}, |
| {104, 0x3e}, |
| {98, 0x3e}, |
| {110, 0x3d}, |
| {104, 0x3d}, |
| {98, 0x3d}, |
| {110, 0x3c}, |
| {104, 0x3c}, |
| {98, 0x3c}, |
| {110, 0x3b}, |
| {104, 0x3b}, |
| {98, 0x3b}, |
| {110, 0x3a}, |
| {104, 0x3a}, |
| {98, 0x3a}, |
| {110, 0x39}, |
| {104, 0x39}, |
| {98, 0x39}, |
| {110, 0x38}, |
| {104, 0x38}, |
| {98, 0x38}, |
| {110, 0x37}, |
| {104, 0x37}, |
| {98, 0x37}, |
| {110, 0x36}, |
| {104, 0x36}, |
| {98, 0x36}, |
| {110, 0x35}, |
| {104, 0x35}, |
| {98, 0x35}, |
| {110, 0x34}, |
| {104, 0x34}, |
| {98, 0x34}, |
| {110, 0x33}, |
| {104, 0x33}, |
| {98, 0x33}, |
| {110, 0x32}, |
| {104, 0x32}, |
| {98, 0x32}, |
| {110, 0x31}, |
| {104, 0x31}, |
| {98, 0x31}, |
| {110, 0x30}, |
| {104, 0x30}, |
| {98, 0x30}, |
| {110, 0x6}, |
| {104, 0x6}, |
| {98, 0x6}, |
| {110, 0x5}, |
| {104, 0x5}, |
| {98, 0x5}, |
| {110, 0x4}, |
| {104, 0x4}, |
| {98, 0x4}, |
| {110, 0x3}, |
| {104, 0x3}, |
| {98, 0x3}, |
| {110, 0x2}, |
| {104, 0x2}, |
| {98, 0x2}, |
| {110, 0x1}, |
| {104, 0x1}, |
| {98, 0x1}, |
| {110, 0x0}, |
| {104, 0x0}, |
| {98, 0x0}, |
| {97, 0}, |
| {96, 0}, |
| {95, 0}, |
| {94, 0}, |
| {93, 0}, |
| {92, 0}, |
| {91, 0}, |
| {90, 0}, |
| {89, 0}, |
| {88, 0}, |
| {87, 0}, |
| {86, 0}, |
| {85, 0}, |
| {84, 0}, |
| {83, 0}, |
| {82, 0}, |
| {81, 0}, |
| {80, 0}, |
| {79, 0}, |
| {78, 0}, |
| {77, 0}, |
| {76, 0}, |
| {75, 0}, |
| {74, 0}, |
| {73, 0}, |
| {72, 0}, |
| {71, 0}, |
| {70, 0}, |
| {69, 0}, |
| {68, 0}, |
| {67, 0}, |
| {66, 0}, |
| {65, 0}, |
| {64, 0}, |
| {63, 0}, |
| {62, 0}, |
| {61, 0}, |
| {60, 0}, |
| {59, 0}, |
| } |
| }; |
| |
| static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, |
| u8 is_fat, u8 ctrl_chan_high, |
| struct iwl4965_tx_power_db *tx_power_tbl) |
| { |
| u8 saturation_power; |
| s32 target_power; |
| s32 user_target_power; |
| s32 power_limit; |
| s32 current_temp; |
| s32 reg_limit; |
| s32 current_regulatory; |
| s32 txatten_grp = CALIB_CH_GROUP_MAX; |
| int i; |
| int c; |
| const struct iwl_channel_info *ch_info = NULL; |
| struct iwl_eeprom_calib_ch_info ch_eeprom_info; |
| const struct iwl_eeprom_calib_measure *measurement; |
| s16 voltage; |
| s32 init_voltage; |
| s32 voltage_compensation; |
| s32 degrees_per_05db_num; |
| s32 degrees_per_05db_denom; |
| s32 factory_temp; |
| s32 temperature_comp[2]; |
| s32 factory_gain_index[2]; |
| s32 factory_actual_pwr[2]; |
| s32 power_index; |
| |
| /* Sanity check requested level (dBm) */ |
| if (priv->user_txpower_limit < IWL_TX_POWER_TARGET_POWER_MIN) { |
| IWL_WARNING("Requested user TXPOWER %d below limit.\n", |
| priv->user_txpower_limit); |
| return -EINVAL; |
| } |
| if (priv->user_txpower_limit > IWL_TX_POWER_TARGET_POWER_MAX) { |
| IWL_WARNING("Requested user TXPOWER %d above limit.\n", |
| priv->user_txpower_limit); |
| return -EINVAL; |
| } |
| |
| /* user_txpower_limit is in dBm, convert to half-dBm (half-dB units |
| * are used for indexing into txpower table) */ |
| user_target_power = 2 * priv->user_txpower_limit; |
| |
| /* Get current (RXON) channel, band, width */ |
| ch_info = |
| iwl4965_get_channel_txpower_info(priv, priv->band, channel); |
| |
| IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band, |
| is_fat); |
| |
| if (!ch_info) |
| return -EINVAL; |
| |
| /* get txatten group, used to select 1) thermal txpower adjustment |
| * and 2) mimo txpower balance between Tx chains. */ |
| txatten_grp = iwl4965_get_tx_atten_grp(channel); |
| if (txatten_grp < 0) |
| return -EINVAL; |
| |
| IWL_DEBUG_TXPOWER("channel %d belongs to txatten group %d\n", |
| channel, txatten_grp); |
| |
| if (is_fat) { |
| if (ctrl_chan_high) |
| channel -= 2; |
| else |
| channel += 2; |
| } |
| |
| /* hardware txpower limits ... |
| * saturation (clipping distortion) txpowers are in half-dBm */ |
| if (band) |
| saturation_power = priv->calib_info->saturation_power24; |
| else |
| saturation_power = priv->calib_info->saturation_power52; |
| |
| if (saturation_power < IWL_TX_POWER_SATURATION_MIN || |
| saturation_power > IWL_TX_POWER_SATURATION_MAX) { |
| if (band) |
| saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24; |
| else |
| saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52; |
| } |
| |
| /* regulatory txpower limits ... reg_limit values are in half-dBm, |
| * max_power_avg values are in dBm, convert * 2 */ |
| if (is_fat) |
| reg_limit = ch_info->fat_max_power_avg * 2; |
| else |
| reg_limit = ch_info->max_power_avg * 2; |
| |
| if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) || |
| (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) { |
| if (band) |
| reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24; |
| else |
| reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52; |
| } |
| |
| /* Interpolate txpower calibration values for this channel, |
| * based on factory calibration tests on spaced channels. */ |
| iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); |
| |
| /* calculate tx gain adjustment based on power supply voltage */ |
| voltage = priv->calib_info->voltage; |
| init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); |
| voltage_compensation = |
| iwl4965_get_voltage_compensation(voltage, init_voltage); |
| |
| IWL_DEBUG_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n", |
| init_voltage, |
| voltage, voltage_compensation); |
| |
| /* get current temperature (Celsius) */ |
| current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN); |
| current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX); |
| current_temp = KELVIN_TO_CELSIUS(current_temp); |
| |
| /* select thermal txpower adjustment params, based on channel group |
| * (same frequency group used for mimo txatten adjustment) */ |
| degrees_per_05db_num = |
| tx_power_cmp_tble[txatten_grp].degrees_per_05db_a; |
| degrees_per_05db_denom = |
| tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom; |
| |
| /* get per-chain txpower values from factory measurements */ |
| for (c = 0; c < 2; c++) { |
| measurement = &ch_eeprom_info.measurements[c][1]; |
| |
| /* txgain adjustment (in half-dB steps) based on difference |
| * between factory and current temperature */ |
| factory_temp = measurement->temperature; |
| iwl4965_math_div_round((current_temp - factory_temp) * |
| degrees_per_05db_denom, |
| degrees_per_05db_num, |
| &temperature_comp[c]); |
| |
| factory_gain_index[c] = measurement->gain_idx; |
| factory_actual_pwr[c] = measurement->actual_pow; |
| |
| IWL_DEBUG_TXPOWER("chain = %d\n", c); |
| IWL_DEBUG_TXPOWER("fctry tmp %d, " |
| "curr tmp %d, comp %d steps\n", |
| factory_temp, current_temp, |
| temperature_comp[c]); |
| |
| IWL_DEBUG_TXPOWER("fctry idx %d, fctry pwr %d\n", |
| factory_gain_index[c], |
| factory_actual_pwr[c]); |
| } |
| |
| /* for each of 33 bit-rates (including 1 for CCK) */ |
| for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) { |
| u8 is_mimo_rate; |
| union iwl4965_tx_power_dual_stream tx_power; |
| |
| /* for mimo, reduce each chain's txpower by half |
| * (3dB, 6 steps), so total output power is regulatory |
| * compliant. */ |
| if (i & 0x8) { |
| current_regulatory = reg_limit - |
| IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION; |
| is_mimo_rate = 1; |
| } else { |
| current_regulatory = reg_limit; |
| is_mimo_rate = 0; |
| } |
| |
| /* find txpower limit, either hardware or regulatory */ |
| power_limit = saturation_power - back_off_table[i]; |
| if (power_limit > current_regulatory) |
| power_limit = current_regulatory; |
| |
| /* reduce user's txpower request if necessary |
| * for this rate on this channel */ |
| target_power = user_target_power; |
| if (target_power > power_limit) |
| target_power = power_limit; |
| |
| IWL_DEBUG_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n", |
| i, saturation_power - back_off_table[i], |
| current_regulatory, user_target_power, |
| target_power); |
| |
| /* for each of 2 Tx chains (radio transmitters) */ |
| for (c = 0; c < 2; c++) { |
| s32 atten_value; |
| |
| if (is_mimo_rate) |
| atten_value = |
| (s32)le32_to_cpu(priv->card_alive_init. |
| tx_atten[txatten_grp][c]); |
| else |
| atten_value = 0; |
| |
| /* calculate index; higher index means lower txpower */ |
| power_index = (u8) (factory_gain_index[c] - |
| (target_power - |
| factory_actual_pwr[c]) - |
| temperature_comp[c] - |
| voltage_compensation + |
| atten_value); |
| |
| /* IWL_DEBUG_TXPOWER("calculated txpower index %d\n", |
| power_index); */ |
| |
| if (power_index < get_min_power_index(i, band)) |
| power_index = get_min_power_index(i, band); |
| |
| /* adjust 5 GHz index to support negative indexes */ |
| if (!band) |
| power_index += 9; |
| |
| /* CCK, rate 32, reduce txpower for CCK */ |
| if (i == POWER_TABLE_CCK_ENTRY) |
| power_index += |
| IWL_TX_POWER_CCK_COMPENSATION_C_STEP; |
| |
| /* stay within the table! */ |
| if (power_index > 107) { |
| IWL_WARNING("txpower index %d > 107\n", |
| power_index); |
| power_index = 107; |
| } |
| if (power_index < 0) { |
| IWL_WARNING("txpower index %d < 0\n", |
| power_index); |
| power_index = 0; |
| } |
| |
| /* fill txpower command for this rate/chain */ |
| tx_power.s.radio_tx_gain[c] = |
| gain_table[band][power_index].radio; |
| tx_power.s.dsp_predis_atten[c] = |
| gain_table[band][power_index].dsp; |
| |
| IWL_DEBUG_TXPOWER("chain %d mimo %d index %d " |
| "gain 0x%02x dsp %d\n", |
| c, atten_value, power_index, |
| tx_power.s.radio_tx_gain[c], |
| tx_power.s.dsp_predis_atten[c]); |
| }/* for each chain */ |
| |
| tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); |
| |
| }/* for each rate */ |
| |
| return 0; |
| } |
| |
| /** |
| * iwl4965_hw_reg_send_txpower - Configure the TXPOWER level user limit |
| * |
| * Uses the active RXON for channel, band, and characteristics (fat, high) |
| * The power limit is taken from priv->user_txpower_limit. |
| */ |
| int iwl4965_hw_reg_send_txpower(struct iwl_priv *priv) |
| { |
| struct iwl4965_txpowertable_cmd cmd = { 0 }; |
| int ret; |
| u8 band = 0; |
| u8 is_fat = 0; |
| u8 ctrl_chan_high = 0; |
| |
| if (test_bit(STATUS_SCANNING, &priv->status)) { |
| /* If this gets hit a lot, switch it to a BUG() and catch |
| * the stack trace to find out who is calling this during |
| * a scan. */ |
| IWL_WARNING("TX Power requested while scanning!\n"); |
| return -EAGAIN; |
| } |
| |
| band = priv->band == IEEE80211_BAND_2GHZ; |
| |
| is_fat = is_fat_channel(priv->active_rxon.flags); |
| |
| if (is_fat && |
| (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) |
| ctrl_chan_high = 1; |
| |
| cmd.band = band; |
| cmd.channel = priv->active_rxon.channel; |
| |
| ret = iwl4965_fill_txpower_tbl(priv, band, |
| le16_to_cpu(priv->active_rxon.channel), |
| is_fat, ctrl_chan_high, &cmd.tx_power); |
| if (ret) |
| goto out; |
| |
| ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd); |
| |
| out: |
| return ret; |
| } |
| |
| static int iwl4965_send_rxon_assoc(struct iwl_priv *priv) |
| { |
| int ret = 0; |
| struct iwl4965_rxon_assoc_cmd rxon_assoc; |
| const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon; |
| const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon; |
| |
| if ((rxon1->flags == rxon2->flags) && |
| (rxon1->filter_flags == rxon2->filter_flags) && |
| (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && |
| (rxon1->ofdm_ht_single_stream_basic_rates == |
| rxon2->ofdm_ht_single_stream_basic_rates) && |
| (rxon1->ofdm_ht_dual_stream_basic_rates == |
| rxon2->ofdm_ht_dual_stream_basic_rates) && |
| (rxon1->rx_chain == rxon2->rx_chain) && |
| (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { |
| IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n"); |
| return 0; |
| } |
| |
| rxon_assoc.flags = priv->staging_rxon.flags; |
| rxon_assoc.filter_flags = priv->staging_rxon.filter_flags; |
| rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates; |
| rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates; |
| rxon_assoc.reserved = 0; |
| rxon_assoc.ofdm_ht_single_stream_basic_rates = |
| priv->staging_rxon.ofdm_ht_single_stream_basic_rates; |
| rxon_assoc.ofdm_ht_dual_stream_basic_rates = |
| priv->staging_rxon.ofdm_ht_dual_stream_basic_rates; |
| rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain; |
| |
| ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC, |
| sizeof(rxon_assoc), &rxon_assoc, NULL); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| |
| int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel) |
| { |
| int rc; |
| u8 band = 0; |
| u8 is_fat = 0; |
| u8 ctrl_chan_high = 0; |
| struct iwl4965_channel_switch_cmd cmd = { 0 }; |
| const struct iwl_channel_info *ch_info; |
| |
| band = priv->band == IEEE80211_BAND_2GHZ; |
| |
| ch_info = iwl_get_channel_info(priv, priv->band, channel); |
| |
| is_fat = is_fat_channel(priv->staging_rxon.flags); |
| |
| if (is_fat && |
| (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) |
| ctrl_chan_high = 1; |
| |
| cmd.band = band; |
| cmd.expect_beacon = 0; |
| cmd.channel = cpu_to_le16(channel); |
| cmd.rxon_flags = priv->active_rxon.flags; |
| cmd.rxon_filter_flags = priv->active_rxon.filter_flags; |
| cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); |
| if (ch_info) |
| cmd.expect_beacon = is_channel_radar(ch_info); |
| else |
| cmd.expect_beacon = 1; |
| |
| rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat, |
| ctrl_chan_high, &cmd.tx_power); |
| if (rc) { |
| IWL_DEBUG_11H("error:%d fill txpower_tbl\n", rc); |
| return rc; |
| } |
| |
| rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); |
| return rc; |
| } |
| |
| static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv) |
| { |
| struct iwl4965_shared *s = priv->shared_virt; |
| return le32_to_cpu(s->rb_closed) & 0xFFF; |
| } |
| |
| int iwl4965_hw_get_temperature(struct iwl_priv *priv) |
| { |
| return priv->temperature; |
| } |
| |
| unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, |
| struct iwl_frame *frame, u8 rate) |
| { |
| struct iwl4965_tx_beacon_cmd *tx_beacon_cmd; |
| unsigned int frame_size; |
| |
| tx_beacon_cmd = &frame->u.beacon; |
| memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); |
| |
| tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; |
| tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; |
| |
| frame_size = iwl4965_fill_beacon_frame(priv, |
| tx_beacon_cmd->frame, |
| iwl_bcast_addr, |
| sizeof(frame->u) - sizeof(*tx_beacon_cmd)); |
| |
| BUG_ON(frame_size > MAX_MPDU_SIZE); |
| tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); |
| |
| if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) |
| tx_beacon_cmd->tx.rate_n_flags = |
| iwl4965_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); |
| else |
| tx_beacon_cmd->tx.rate_n_flags = |
| iwl4965_hw_set_rate_n_flags(rate, 0); |
| |
| tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | |
| TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK); |
| return (sizeof(*tx_beacon_cmd) + frame_size); |
| } |
| |
| static int iwl4965_alloc_shared_mem(struct iwl_priv *priv) |
| { |
| priv->shared_virt = pci_alloc_consistent(priv->pci_dev, |
| sizeof(struct iwl4965_shared), |
| &priv->shared_phys); |
| if (!priv->shared_virt) |
| return -ENOMEM; |
| |
| memset(priv->shared_virt, 0, sizeof(struct iwl4965_shared)); |
| |
| priv->rb_closed_offset = offsetof(struct iwl4965_shared, rb_closed); |
| |
| return 0; |
| } |
| |
| static void iwl4965_free_shared_mem(struct iwl_priv *priv) |
| { |
| if (priv->shared_virt) |
| pci_free_consistent(priv->pci_dev, |
| sizeof(struct iwl4965_shared), |
| priv->shared_virt, |
| priv->shared_phys); |
| } |
| |
| /** |
| * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array |
| */ |
| static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, |
| struct iwl_tx_queue *txq, |
| u16 byte_cnt) |
| { |
| int len; |
| int txq_id = txq->q.id; |
| struct iwl4965_shared *shared_data = priv->shared_virt; |
| |
| len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; |
| |
| /* Set up byte count within first 256 entries */ |
| IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. |
| tfd_offset[txq->q.write_ptr], byte_cnt, len); |
| |
| /* If within first 64 entries, duplicate at end */ |
| if (txq->q.write_ptr < IWL49_MAX_WIN_SIZE) |
| IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id]. |
| tfd_offset[IWL49_QUEUE_SIZE + txq->q.write_ptr], |
| byte_cnt, len); |
| } |
| |
| /** |
| * sign_extend - Sign extend a value using specified bit as sign-bit |
| * |
| * Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1 |
| * and bit0..2 is 001b which when sign extended to 1111111111111001b is -7. |
| * |
| * @param oper value to sign extend |
| * @param index 0 based bit index (0<=index<32) to sign bit |
| */ |
| static s32 sign_extend(u32 oper, int index) |
| { |
| u8 shift = 31 - index; |
| |
| return (s32)(oper << shift) >> shift; |
| } |
| |
| /** |
| * iwl4965_get_temperature - return the calibrated temperature (in Kelvin) |
| * @statistics: Provides the temperature reading from the uCode |
| * |
| * A return of <0 indicates bogus data in the statistics |
| */ |
| int iwl4965_get_temperature(const struct iwl_priv *priv) |
| { |
| s32 temperature; |
| s32 vt; |
| s32 R1, R2, R3; |
| u32 R4; |
| |
| if (test_bit(STATUS_TEMPERATURE, &priv->status) && |
| (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) { |
| IWL_DEBUG_TEMP("Running FAT temperature calibration\n"); |
| R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]); |
| R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]); |
| R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]); |
| R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]); |
| } else { |
| IWL_DEBUG_TEMP("Running temperature calibration\n"); |
| R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]); |
| R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]); |
| R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]); |
| R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]); |
| } |
| |
| /* |
| * Temperature is only 23 bits, so sign extend out to 32. |
| * |
| * NOTE If we haven't received a statistics notification yet |
| * with an updated temperature, use R4 provided to us in the |
| * "initialize" ALIVE response. |
| */ |
| if (!test_bit(STATUS_TEMPERATURE, &priv->status)) |
| vt = sign_extend(R4, 23); |
| else |
| vt = sign_extend( |
| le32_to_cpu(priv->statistics.general.temperature), 23); |
| |
| IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", |
| R1, R2, R3, vt); |
| |
| if (R3 == R1) { |
| IWL_ERROR("Calibration conflict R1 == R3\n"); |
| return -1; |
| } |
| |
| /* Calculate temperature in degrees Kelvin, adjust by 97%. |
| * Add offset to center the adjustment around 0 degrees Centigrade. */ |
| temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2); |
| temperature /= (R3 - R1); |
| temperature = (temperature * 97) / 100 + |
| TEMPERATURE_CALIB_KELVIN_OFFSET; |
| |
| IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n", temperature, |
| KELVIN_TO_CELSIUS(temperature)); |
| |
| return temperature; |
| } |
| |
| /* Adjust Txpower only if temperature variance is greater than threshold. */ |
| #define IWL_TEMPERATURE_THRESHOLD 3 |
| |
| /** |
| * iwl4965_is_temp_calib_needed - determines if new calibration is needed |
| * |
| * If the temperature changed has changed sufficiently, then a recalibration |
| * is needed. |
| * |
| * Assumes caller will replace priv->last_temperature once calibration |
| * executed. |
| */ |
| static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv) |
| { |
| int temp_diff; |
| |
| if (!test_bit(STATUS_STATISTICS, &priv->status)) { |
| IWL_DEBUG_TEMP("Temperature not updated -- no statistics.\n"); |
| return 0; |
| } |
| |
| temp_diff = priv->temperature - priv->last_temperature; |
| |
| /* get absolute value */ |
| if (temp_diff < 0) { |
| IWL_DEBUG_POWER("Getting cooler, delta %d, \n", temp_diff); |
| temp_diff = -temp_diff; |
| } else if (temp_diff == 0) |
| IWL_DEBUG_POWER("Same temp, \n"); |
| else |
| IWL_DEBUG_POWER("Getting warmer, delta %d, \n", temp_diff); |
| |
| if (temp_diff < IWL_TEMPERATURE_THRESHOLD) { |
| IWL_DEBUG_POWER("Thermal txpower calib not needed\n"); |
| return 0; |
| } |
| |
| IWL_DEBUG_POWER("Thermal txpower calib needed\n"); |
| |
| return 1; |
| } |
| |
| /* Calculate noise level, based on measurements during network silence just |
| * before arriving beacon. This measurement can be done only if we know |
| * exactly when to expect beacons, therefore only when we're associated. */ |
| static void iwl4965_rx_calc_noise(struct iwl_priv *priv) |
| { |
| struct statistics_rx_non_phy *rx_info |
| = &(priv->statistics.rx.general); |
| int num_active_rx = 0; |
| int total_silence = 0; |
| int bcn_silence_a = |
| le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; |
| int bcn_silence_b = |
| le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; |
| int bcn_silence_c = |
| le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; |
| |
| if (bcn_silence_a) { |
| total_silence += bcn_silence_a; |
| num_active_rx++; |
| } |
| if (bcn_silence_b) { |
| total_silence += bcn_silence_b; |
| num_active_rx++; |
| } |
| if (bcn_silence_c) { |
| total_silence += bcn_silence_c; |
| num_active_rx++; |
| } |
| |
| /* Average among active antennas */ |
| if (num_active_rx) |
| priv->last_rx_noise = (total_silence / num_active_rx) - 107; |
| else |
| priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; |
| |
| IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", |
| bcn_silence_a, bcn_silence_b, bcn_silence_c, |
| priv->last_rx_noise); |
| } |
| |
| void iwl4965_hw_rx_statistics(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| int change; |
| s32 temp; |
| |
| IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n", |
| (int)sizeof(priv->statistics), pkt->len); |
| |
| change = ((priv->statistics.general.temperature != |
| pkt->u.stats.general.temperature) || |
| ((priv->statistics.flag & |
| STATISTICS_REPLY_FLG_FAT_MODE_MSK) != |
| (pkt->u.stats.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK))); |
| |
| memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics)); |
| |
| set_bit(STATUS_STATISTICS, &priv->status); |
| |
| /* Reschedule the statistics timer to occur in |
| * REG_RECALIB_PERIOD seconds to ensure we get a |
| * thermal update even if the uCode doesn't give |
| * us one */ |
| mod_timer(&priv->statistics_periodic, jiffies + |
| msecs_to_jiffies(REG_RECALIB_PERIOD * 1000)); |
| |
| if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && |
| (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { |
| iwl4965_rx_calc_noise(priv); |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| queue_work(priv->workqueue, &priv->sensitivity_work); |
| #endif |
| } |
| |
| iwl_leds_background(priv); |
| |
| /* If the hardware hasn't reported a change in |
| * temperature then don't bother computing a |
| * calibrated temperature value */ |
| if (!change) |
| return; |
| |
| temp = iwl4965_get_temperature(priv); |
| if (temp < 0) |
| return; |
| |
| if (priv->temperature != temp) { |
| if (priv->temperature) |
| IWL_DEBUG_TEMP("Temperature changed " |
| "from %dC to %dC\n", |
| KELVIN_TO_CELSIUS(priv->temperature), |
| KELVIN_TO_CELSIUS(temp)); |
| else |
| IWL_DEBUG_TEMP("Temperature " |
| "initialized to %dC\n", |
| KELVIN_TO_CELSIUS(temp)); |
| } |
| |
| priv->temperature = temp; |
| set_bit(STATUS_TEMPERATURE, &priv->status); |
| |
| if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && |
| iwl4965_is_temp_calib_needed(priv)) |
| queue_work(priv->workqueue, &priv->txpower_work); |
| } |
| |
| static void iwl4965_add_radiotap(struct iwl_priv *priv, |
| struct sk_buff *skb, |
| struct iwl4965_rx_phy_res *rx_start, |
| struct ieee80211_rx_status *stats, |
| u32 ampdu_status) |
| { |
| s8 signal = stats->signal; |
| s8 noise = 0; |
| int rate = stats->rate_idx; |
| u64 tsf = stats->mactime; |
| __le16 antenna; |
| __le16 phy_flags_hw = rx_start->phy_flags; |
| struct iwl4965_rt_rx_hdr { |
| struct ieee80211_radiotap_header rt_hdr; |
| __le64 rt_tsf; /* TSF */ |
| u8 rt_flags; /* radiotap packet flags */ |
| u8 rt_rate; /* rate in 500kb/s */ |
| __le16 rt_channelMHz; /* channel in MHz */ |
| __le16 rt_chbitmask; /* channel bitfield */ |
| s8 rt_dbmsignal; /* signal in dBm, kluged to signed */ |
| s8 rt_dbmnoise; |
| u8 rt_antenna; /* antenna number */ |
| } __attribute__ ((packed)) *iwl4965_rt; |
| |
| /* TODO: We won't have enough headroom for HT frames. Fix it later. */ |
| if (skb_headroom(skb) < sizeof(*iwl4965_rt)) { |
| if (net_ratelimit()) |
| printk(KERN_ERR "not enough headroom [%d] for " |
| "radiotap head [%zd]\n", |
| skb_headroom(skb), sizeof(*iwl4965_rt)); |
| return; |
| } |
| |
| /* put radiotap header in front of 802.11 header and data */ |
| iwl4965_rt = (void *)skb_push(skb, sizeof(*iwl4965_rt)); |
| |
| /* initialise radiotap header */ |
| iwl4965_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; |
| iwl4965_rt->rt_hdr.it_pad = 0; |
| |
| /* total header + data */ |
| put_unaligned(cpu_to_le16(sizeof(*iwl4965_rt)), |
| &iwl4965_rt->rt_hdr.it_len); |
| |
| /* Indicate all the fields we add to the radiotap header */ |
| put_unaligned(cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) | |
| (1 << IEEE80211_RADIOTAP_FLAGS) | |
| (1 << IEEE80211_RADIOTAP_RATE) | |
| (1 << IEEE80211_RADIOTAP_CHANNEL) | |
| (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | |
| (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | |
| (1 << IEEE80211_RADIOTAP_ANTENNA)), |
| &iwl4965_rt->rt_hdr.it_present); |
| |
| /* Zero the flags, we'll add to them as we go */ |
| iwl4965_rt->rt_flags = 0; |
| |
| put_unaligned(cpu_to_le64(tsf), &iwl4965_rt->rt_tsf); |
| |
| iwl4965_rt->rt_dbmsignal = signal; |
| iwl4965_rt->rt_dbmnoise = noise; |
| |
| /* Convert the channel frequency and set the flags */ |
| put_unaligned(cpu_to_le16(stats->freq), &iwl4965_rt->rt_channelMHz); |
| if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) |
| put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | |
| IEEE80211_CHAN_5GHZ), |
| &iwl4965_rt->rt_chbitmask); |
| else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) |
| put_unaligned(cpu_to_le16(IEEE80211_CHAN_CCK | |
| IEEE80211_CHAN_2GHZ), |
| &iwl4965_rt->rt_chbitmask); |
| else /* 802.11g */ |
| put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | |
| IEEE80211_CHAN_2GHZ), |
| &iwl4965_rt->rt_chbitmask); |
| |
| if (rate == -1) |
| iwl4965_rt->rt_rate = 0; |
| else |
| iwl4965_rt->rt_rate = iwl_rates[rate].ieee; |
| |
| /* |
| * "antenna number" |
| * |
| * It seems that the antenna field in the phy flags value |
| * is actually a bitfield. This is undefined by radiotap, |
| * it wants an actual antenna number but I always get "7" |
| * for most legacy frames I receive indicating that the |
| * same frame was received on all three RX chains. |
| * |
| * I think this field should be removed in favour of a |
| * new 802.11n radiotap field "RX chains" that is defined |
| * as a bitmask. |
| */ |
| antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; |
| iwl4965_rt->rt_antenna = le16_to_cpu(antenna) >> 4; |
| |
| /* set the preamble flag if appropriate */ |
| if (phy_flags_hw & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) |
| iwl4965_rt->rt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; |
| |
| stats->flag |= RX_FLAG_RADIOTAP; |
| } |
| |
| static void iwl_update_rx_stats(struct iwl_priv *priv, u16 fc, u16 len) |
| { |
| /* 0 - mgmt, 1 - cnt, 2 - data */ |
| int idx = (fc & IEEE80211_FCTL_FTYPE) >> 2; |
| priv->rx_stats[idx].cnt++; |
| priv->rx_stats[idx].bytes += len; |
| } |
| |
| /* |
| * returns non-zero if packet should be dropped |
| */ |
| static int iwl4965_set_decrypted_flag(struct iwl_priv *priv, |
| struct ieee80211_hdr *hdr, |
| u32 decrypt_res, |
| struct ieee80211_rx_status *stats) |
| { |
| u16 fc = le16_to_cpu(hdr->frame_control); |
| |
| if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK) |
| return 0; |
| |
| if (!(fc & IEEE80211_FCTL_PROTECTED)) |
| return 0; |
| |
| IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res); |
| switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { |
| case RX_RES_STATUS_SEC_TYPE_TKIP: |
| /* The uCode has got a bad phase 1 Key, pushes the packet. |
| * Decryption will be done in SW. */ |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_BAD_KEY_TTAK) |
| break; |
| |
| case RX_RES_STATUS_SEC_TYPE_WEP: |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_BAD_ICV_MIC) { |
| /* bad ICV, the packet is destroyed since the |
| * decryption is inplace, drop it */ |
| IWL_DEBUG_RX("Packet destroyed\n"); |
| return -1; |
| } |
| case RX_RES_STATUS_SEC_TYPE_CCMP: |
| if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == |
| RX_RES_STATUS_DECRYPT_OK) { |
| IWL_DEBUG_RX("hw decrypt successfully!!!\n"); |
| stats->flag |= RX_FLAG_DECRYPTED; |
| } |
| break; |
| |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| static u32 iwl4965_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) |
| { |
| u32 decrypt_out = 0; |
| |
| if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == |
| RX_RES_STATUS_STATION_FOUND) |
| decrypt_out |= (RX_RES_STATUS_STATION_FOUND | |
| RX_RES_STATUS_NO_STATION_INFO_MISMATCH); |
| |
| decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); |
| |
| /* packet was not encrypted */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_NONE) |
| return decrypt_out; |
| |
| /* packet was encrypted with unknown alg */ |
| if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == |
| RX_RES_STATUS_SEC_TYPE_ERR) |
| return decrypt_out; |
| |
| /* decryption was not done in HW */ |
| if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != |
| RX_MPDU_RES_STATUS_DEC_DONE_MSK) |
| return decrypt_out; |
| |
| switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { |
| |
| case RX_RES_STATUS_SEC_TYPE_CCMP: |
| /* alg is CCM: check MIC only */ |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) |
| /* Bad MIC */ |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| |
| break; |
| |
| case RX_RES_STATUS_SEC_TYPE_TKIP: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { |
| /* Bad TTAK */ |
| decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; |
| break; |
| } |
| /* fall through if TTAK OK */ |
| default: |
| if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) |
| decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; |
| else |
| decrypt_out |= RX_RES_STATUS_DECRYPT_OK; |
| break; |
| }; |
| |
| IWL_DEBUG_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", |
| decrypt_in, decrypt_out); |
| |
| return decrypt_out; |
| } |
| |
| static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data, |
| int include_phy, |
| struct iwl_rx_mem_buffer *rxb, |
| struct ieee80211_rx_status *stats) |
| { |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| struct iwl4965_rx_phy_res *rx_start = (include_phy) ? |
| (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL; |
| struct ieee80211_hdr *hdr; |
| u16 len; |
| __le32 *rx_end; |
| unsigned int skblen; |
| u32 ampdu_status; |
| u32 ampdu_status_legacy; |
| |
| if (!include_phy && priv->last_phy_res[0]) |
| rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; |
| |
| if (!rx_start) { |
| IWL_ERROR("MPDU frame without a PHY data\n"); |
| return; |
| } |
| if (include_phy) { |
| hdr = (struct ieee80211_hdr *)((u8 *) & rx_start[1] + |
| rx_start->cfg_phy_cnt); |
| |
| len = le16_to_cpu(rx_start->byte_count); |
| |
| rx_end = (__le32 *) ((u8 *) & pkt->u.raw[0] + |
| sizeof(struct iwl4965_rx_phy_res) + |
| rx_start->cfg_phy_cnt + len); |
| |
| } else { |
| struct iwl4965_rx_mpdu_res_start *amsdu = |
| (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; |
| |
| hdr = (struct ieee80211_hdr *)(pkt->u.raw + |
| sizeof(struct iwl4965_rx_mpdu_res_start)); |
| len = le16_to_cpu(amsdu->byte_count); |
| rx_start->byte_count = amsdu->byte_count; |
| rx_end = (__le32 *) (((u8 *) hdr) + len); |
| } |
| /* In monitor mode allow 802.11 ACk frames (10 bytes) */ |
| if (len > priv->hw_params.max_pkt_size || |
| len < ((priv->iw_mode == IEEE80211_IF_TYPE_MNTR) ? 10 : 16)) { |
| IWL_WARNING("byte count out of range [16,4K] : %d\n", len); |
| return; |
| } |
| |
| ampdu_status = le32_to_cpu(*rx_end); |
| skblen = ((u8 *) rx_end - (u8 *) & pkt->u.raw[0]) + sizeof(u32); |
| |
| if (!include_phy) { |
| /* New status scheme, need to translate */ |
| ampdu_status_legacy = ampdu_status; |
| ampdu_status = iwl4965_translate_rx_status(priv, ampdu_status); |
| } |
| |
| /* start from MAC */ |
| skb_reserve(rxb->skb, (void *)hdr - (void *)pkt); |
| skb_put(rxb->skb, len); /* end where data ends */ |
| |
| /* We only process data packets if the interface is open */ |
| if (unlikely(!priv->is_open)) { |
| IWL_DEBUG_DROP_LIMIT |
| ("Dropping packet while interface is not open.\n"); |
| return; |
| } |
| |
| stats->flag = 0; |
| hdr = (struct ieee80211_hdr *)rxb->skb->data; |
| |
| /* in case of HW accelerated crypto and bad decryption, drop */ |
| if (!priv->hw_params.sw_crypto && |
| iwl4965_set_decrypted_flag(priv, hdr, ampdu_status, stats)) |
| return; |
| |
| if (priv->add_radiotap) |
| iwl4965_add_radiotap(priv, rxb->skb, rx_start, stats, ampdu_status); |
| |
| iwl_update_rx_stats(priv, le16_to_cpu(hdr->frame_control), len); |
| ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); |
| priv->alloc_rxb_skb--; |
| rxb->skb = NULL; |
| } |
| |
| /* Calc max signal level (dBm) among 3 possible receivers */ |
| static int iwl4965_calc_rssi(struct iwl_priv *priv, |
| struct iwl4965_rx_phy_res *rx_resp) |
| { |
| /* data from PHY/DSP regarding signal strength, etc., |
| * contents are always there, not configurable by host. */ |
| struct iwl4965_rx_non_cfg_phy *ncphy = |
| (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy; |
| u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK) |
| >> IWL_AGC_DB_POS; |
| |
| u32 valid_antennae = |
| (le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK) |
| >> RX_PHY_FLAGS_ANTENNAE_OFFSET; |
| u8 max_rssi = 0; |
| u32 i; |
| |
| /* Find max rssi among 3 possible receivers. |
| * These values are measured by the digital signal processor (DSP). |
| * They should stay fairly constant even as the signal strength varies, |
| * if the radio's automatic gain control (AGC) is working right. |
| * AGC value (see below) will provide the "interesting" info. */ |
| for (i = 0; i < 3; i++) |
| if (valid_antennae & (1 << i)) |
| max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); |
| |
| IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", |
| ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], |
| max_rssi, agc); |
| |
| /* dBm = max_rssi dB - agc dB - constant. |
| * Higher AGC (higher radio gain) means lower signal. */ |
| return (max_rssi - agc - IWL_RSSI_OFFSET); |
| } |
| |
| static void iwl4965_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK; |
| priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; |
| priv->stations[sta_id].sta.sta.modify_mask = 0; |
| priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); |
| } |
| |
| static void iwl4965_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr) |
| { |
| /* FIXME: need locking over ps_status ??? */ |
| u8 sta_id = iwl_find_station(priv, addr); |
| |
| if (sta_id != IWL_INVALID_STATION) { |
| u8 sta_awake = priv->stations[sta_id]. |
| ps_status == STA_PS_STATUS_WAKE; |
| |
| if (sta_awake && ps_bit) |
| priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP; |
| else if (!sta_awake && !ps_bit) { |
| iwl4965_sta_modify_ps_wake(priv, sta_id); |
| priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE; |
| } |
| } |
| } |
| #ifdef CONFIG_IWLWIFI_DEBUG |
| |
| /** |
| * iwl4965_dbg_report_frame - dump frame to syslog during debug sessions |
| * |
| * You may hack this function to show different aspects of received frames, |
| * including selective frame dumps. |
| * group100 parameter selects whether to show 1 out of 100 good frames. |
| * |
| * TODO: This was originally written for 3945, need to audit for |
| * proper operation with 4965. |
| */ |
| static void iwl4965_dbg_report_frame(struct iwl_priv *priv, |
| struct iwl_rx_packet *pkt, |
| struct ieee80211_hdr *header, int group100) |
| { |
| u32 to_us; |
| u32 print_summary = 0; |
| u32 print_dump = 0; /* set to 1 to dump all frames' contents */ |
| u32 hundred = 0; |
| u32 dataframe = 0; |
| u16 fc; |
| u16 seq_ctl; |
| u16 channel; |
| u16 phy_flags; |
| int rate_sym; |
| u16 length; |
| u16 status; |
| u16 bcn_tmr; |
| u32 tsf_low; |
| u64 tsf; |
| u8 rssi; |
| u8 agc; |
| u16 sig_avg; |
| u16 noise_diff; |
| struct iwl4965_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); |
| struct iwl4965_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); |
| struct iwl4965_rx_frame_end *rx_end = IWL_RX_END(pkt); |
| u8 *data = IWL_RX_DATA(pkt); |
| |
| if (likely(!(priv->debug_level & IWL_DL_RX))) |
| return; |
| |
| /* MAC header */ |
| fc = le16_to_cpu(header->frame_control); |
| seq_ctl = le16_to_cpu(header->seq_ctrl); |
| |
| /* metadata */ |
| channel = le16_to_cpu(rx_hdr->channel); |
| phy_flags = le16_to_cpu(rx_hdr->phy_flags); |
| rate_sym = rx_hdr->rate; |
| length = le16_to_cpu(rx_hdr->len); |
| |
| /* end-of-frame status and timestamp */ |
| status = le32_to_cpu(rx_end->status); |
| bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp); |
| tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff; |
| tsf = le64_to_cpu(rx_end->timestamp); |
| |
| /* signal statistics */ |
| rssi = rx_stats->rssi; |
| agc = rx_stats->agc; |
| sig_avg = le16_to_cpu(rx_stats->sig_avg); |
| noise_diff = le16_to_cpu(rx_stats->noise_diff); |
| |
| to_us = !compare_ether_addr(header->addr1, priv->mac_addr); |
| |
| /* if data frame is to us and all is good, |
| * (optionally) print summary for only 1 out of every 100 */ |
| if (to_us && (fc & ~IEEE80211_FCTL_PROTECTED) == |
| (IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) { |
| dataframe = 1; |
| if (!group100) |
| print_summary = 1; /* print each frame */ |
| else if (priv->framecnt_to_us < 100) { |
| priv->framecnt_to_us++; |
| print_summary = 0; |
| } else { |
| priv->framecnt_to_us = 0; |
| print_summary = 1; |
| hundred = 1; |
| } |
| } else { |
| /* print summary for all other frames */ |
| print_summary = 1; |
| } |
| |
| if (print_summary) { |
| char *title; |
| int rate_idx; |
| u32 bitrate; |
| |
| if (hundred) |
| title = "100Frames"; |
| else if (fc & IEEE80211_FCTL_RETRY) |
| title = "Retry"; |
| else if (ieee80211_is_assoc_response(fc)) |
| title = "AscRsp"; |
| else if (ieee80211_is_reassoc_response(fc)) |
| title = "RasRsp"; |
| else if (ieee80211_is_probe_response(fc)) { |
| title = "PrbRsp"; |
| print_dump = 1; /* dump frame contents */ |
| } else if (ieee80211_is_beacon(fc)) { |
| title = "Beacon"; |
| print_dump = 1; /* dump frame contents */ |
| } else if (ieee80211_is_atim(fc)) |
| title = "ATIM"; |
| else if (ieee80211_is_auth(fc)) |
| title = "Auth"; |
| else if (ieee80211_is_deauth(fc)) |
| title = "DeAuth"; |
| else if (ieee80211_is_disassoc(fc)) |
| title = "DisAssoc"; |
| else |
| title = "Frame"; |
| |
| rate_idx = iwl4965_hwrate_to_plcp_idx(rate_sym); |
| if (unlikely(rate_idx == -1)) |
| bitrate = 0; |
| else |
| bitrate = iwl_rates[rate_idx].ieee / 2; |
| |
| /* print frame summary. |
| * MAC addresses show just the last byte (for brevity), |
| * but you can hack it to show more, if you'd like to. */ |
| if (dataframe) |
| IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " |
| "len=%u, rssi=%d, chnl=%d, rate=%u, \n", |
| title, fc, header->addr1[5], |
| length, rssi, channel, bitrate); |
| else { |
| /* src/dst addresses assume managed mode */ |
| IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, " |
| "src=0x%02x, rssi=%u, tim=%lu usec, " |
| "phy=0x%02x, chnl=%d\n", |
| title, fc, header->addr1[5], |
| header->addr3[5], rssi, |
| tsf_low - priv->scan_start_tsf, |
| phy_flags, channel); |
| } |
| } |
| if (print_dump) |
| iwl_print_hex_dump(priv, IWL_DL_RX, data, length); |
| } |
| #else |
| static inline void iwl4965_dbg_report_frame(struct iwl_priv *priv, |
| struct iwl_rx_packet *pkt, |
| struct ieee80211_hdr *header, |
| int group100) |
| { |
| } |
| #endif |
| |
| |
| |
| /* Called for REPLY_RX (legacy ABG frames), or |
| * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ |
| static void iwl4965_rx_reply_rx(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct ieee80211_hdr *header; |
| struct ieee80211_rx_status rx_status; |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| /* Use phy data (Rx signal strength, etc.) contained within |
| * this rx packet for legacy frames, |
| * or phy data cached from REPLY_RX_PHY_CMD for HT frames. */ |
| int include_phy = (pkt->hdr.cmd == REPLY_RX); |
| struct iwl4965_rx_phy_res *rx_start = (include_phy) ? |
| (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : |
| (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; |
| __le32 *rx_end; |
| unsigned int len = 0; |
| u16 fc; |
| u8 network_packet; |
| |
| rx_status.mactime = le64_to_cpu(rx_start->timestamp); |
| rx_status.freq = |
| ieee80211_channel_to_frequency(le16_to_cpu(rx_start->channel)); |
| rx_status.band = (rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? |
| IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; |
| rx_status.rate_idx = |
| iwl4965_hwrate_to_plcp_idx(le32_to_cpu(rx_start->rate_n_flags)); |
| if (rx_status.band == IEEE80211_BAND_5GHZ) |
| rx_status.rate_idx -= IWL_FIRST_OFDM_RATE; |
| |
| rx_status.antenna = 0; |
| rx_status.flag = 0; |
| |
| if ((unlikely(rx_start->cfg_phy_cnt > 20))) { |
| IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n", |
| rx_start->cfg_phy_cnt); |
| return; |
| } |
| |
| if (!include_phy) { |
| if (priv->last_phy_res[0]) |
| rx_start = (struct iwl4965_rx_phy_res *) |
| &priv->last_phy_res[1]; |
| else |
| rx_start = NULL; |
| } |
| |
| if (!rx_start) { |
| IWL_ERROR("MPDU frame without a PHY data\n"); |
| return; |
| } |
| |
| if (include_phy) { |
| header = (struct ieee80211_hdr *)((u8 *) & rx_start[1] |
| + rx_start->cfg_phy_cnt); |
| |
| len = le16_to_cpu(rx_start->byte_count); |
| rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt + |
| sizeof(struct iwl4965_rx_phy_res) + len); |
| } else { |
| struct iwl4965_rx_mpdu_res_start *amsdu = |
| (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; |
| |
| header = (void *)(pkt->u.raw + |
| sizeof(struct iwl4965_rx_mpdu_res_start)); |
| len = le16_to_cpu(amsdu->byte_count); |
| rx_end = (__le32 *) (pkt->u.raw + |
| sizeof(struct iwl4965_rx_mpdu_res_start) + len); |
| } |
| |
| if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) || |
| !(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) { |
| IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", |
| le32_to_cpu(*rx_end)); |
| return; |
| } |
| |
| priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp); |
| |
| /* Find max signal strength (dBm) among 3 antenna/receiver chains */ |
| rx_status.signal = iwl4965_calc_rssi(priv, rx_start); |
| |
| /* Meaningful noise values are available only from beacon statistics, |
| * which are gathered only when associated, and indicate noise |
| * only for the associated network channel ... |
| * Ignore these noise values while scanning (other channels) */ |
| if (iwl_is_associated(priv) && |
| !test_bit(STATUS_SCANNING, &priv->status)) { |
| rx_status.noise = priv->last_rx_noise; |
| rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal, |
| rx_status.noise); |
| } else { |
| rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE; |
| rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal, 0); |
| } |
| |
| /* Reset beacon noise level if not associated. */ |
| if (!iwl_is_associated(priv)) |
| priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; |
| |
| /* Set "1" to report good data frames in groups of 100 */ |
| /* FIXME: need to optimze the call: */ |
| iwl4965_dbg_report_frame(priv, pkt, header, 1); |
| |
| IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n", |
| rx_status.signal, rx_status.noise, rx_status.signal, |
| (unsigned long long)rx_status.mactime); |
| |
| |
| if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { |
| iwl4965_handle_data_packet(priv, 1, include_phy, |
| rxb, &rx_status); |
| return; |
| } |
| |
| network_packet = iwl4965_is_network_packet(priv, header); |
| if (network_packet) { |
| priv->last_rx_rssi = rx_status.signal; |
| priv->last_beacon_time = priv->ucode_beacon_time; |
| priv->last_tsf = le64_to_cpu(rx_start->timestamp); |
| } |
| |
| fc = le16_to_cpu(header->frame_control); |
| switch (fc & IEEE80211_FCTL_FTYPE) { |
| case IEEE80211_FTYPE_MGMT: |
| if (priv->iw_mode == IEEE80211_IF_TYPE_AP) |
| iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, |
| header->addr2); |
| iwl4965_handle_data_packet(priv, 0, include_phy, rxb, &rx_status); |
| break; |
| |
| case IEEE80211_FTYPE_CTL: |
| #ifdef CONFIG_IWL4965_HT |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_BACK_REQ: |
| IWL_DEBUG_HT("IEEE80211_STYPE_BACK_REQ arrived\n"); |
| iwl4965_handle_data_packet(priv, 0, include_phy, |
| rxb, &rx_status); |
| break; |
| default: |
| break; |
| } |
| #endif |
| break; |
| |
| case IEEE80211_FTYPE_DATA: { |
| DECLARE_MAC_BUF(mac1); |
| DECLARE_MAC_BUF(mac2); |
| DECLARE_MAC_BUF(mac3); |
| |
| if (priv->iw_mode == IEEE80211_IF_TYPE_AP) |
| iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM, |
| header->addr2); |
| |
| if (unlikely(!network_packet)) |
| IWL_DEBUG_DROP("Dropping (non network): " |
| "%s, %s, %s\n", |
| print_mac(mac1, header->addr1), |
| print_mac(mac2, header->addr2), |
| print_mac(mac3, header->addr3)); |
| else if (unlikely(iwl4965_is_duplicate_packet(priv, header))) |
| IWL_DEBUG_DROP("Dropping (dup): %s, %s, %s\n", |
| print_mac(mac1, header->addr1), |
| print_mac(mac2, header->addr2), |
| print_mac(mac3, header->addr3)); |
| else |
| iwl4965_handle_data_packet(priv, 1, include_phy, rxb, |
| &rx_status); |
| break; |
| } |
| default: |
| break; |
| |
| } |
| } |
| |
| /* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). |
| * This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ |
| static void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| priv->last_phy_res[0] = 1; |
| memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]), |
| sizeof(struct iwl4965_rx_phy_res)); |
| } |
| static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| |
| { |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| struct iwl4965_missed_beacon_notif *missed_beacon; |
| |
| missed_beacon = &pkt->u.missed_beacon; |
| if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) { |
| IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", |
| le32_to_cpu(missed_beacon->consequtive_missed_beacons), |
| le32_to_cpu(missed_beacon->total_missed_becons), |
| le32_to_cpu(missed_beacon->num_recvd_beacons), |
| le32_to_cpu(missed_beacon->num_expected_beacons)); |
| if (!test_bit(STATUS_SCANNING, &priv->status)) |
| iwl_init_sensitivity(priv); |
| } |
| #endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/ |
| } |
| #ifdef CONFIG_IWL4965_HT |
| |
| /** |
| * iwl4965_sta_modify_enable_tid_tx - Enable Tx for this TID in station table |
| */ |
| static void iwl4965_sta_modify_enable_tid_tx(struct iwl_priv *priv, |
| int sta_id, int tid) |
| { |
| unsigned long flags; |
| |
| /* Remove "disable" flag, to enable Tx for this TID */ |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; |
| priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); |
| priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); |
| } |
| |
| /** |
| * iwl4965_tx_status_reply_compressed_ba - Update tx status from block-ack |
| * |
| * Go through block-ack's bitmap of ACK'd frames, update driver's record of |
| * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. |
| */ |
| static int iwl4965_tx_status_reply_compressed_ba(struct iwl_priv *priv, |
| struct iwl_ht_agg *agg, |
| struct iwl4965_compressed_ba_resp* |
| ba_resp) |
| |
| { |
| int i, sh, ack; |
| u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); |
| u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); |
| u64 bitmap; |
| int successes = 0; |
| struct ieee80211_tx_info *info; |
| |
| if (unlikely(!agg->wait_for_ba)) { |
| IWL_ERROR("Received BA when not expected\n"); |
| return -EINVAL; |
| } |
| |
| /* Mark that the expected block-ack response arrived */ |
| agg->wait_for_ba = 0; |
| IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); |
| |
| /* Calculate shift to align block-ack bits with our Tx window bits */ |
| sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl>>4); |
| if (sh < 0) /* tbw something is wrong with indices */ |
| sh += 0x100; |
| |
| /* don't use 64-bit values for now */ |
| bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; |
| |
| if (agg->frame_count > (64 - sh)) { |
| IWL_DEBUG_TX_REPLY("more frames than bitmap size"); |
| return -1; |
| } |
| |
| /* check for success or failure according to the |
| * transmitted bitmap and block-ack bitmap */ |
| bitmap &= agg->bitmap; |
| |
| /* For each frame attempted in aggregation, |
| * update driver's record of tx frame's status. */ |
| for (i = 0; i < agg->frame_count ; i++) { |
| ack = bitmap & (1 << i); |
| successes += !!ack; |
| IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", |
| ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff, |
| agg->start_idx + i); |
| } |
| |
| info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb[0]); |
| memset(&info->status, 0, sizeof(info->status)); |
| info->flags = IEEE80211_TX_STAT_ACK; |
| info->flags |= IEEE80211_TX_STAT_AMPDU; |
| info->status.ampdu_ack_map = successes; |
| info->status.ampdu_ack_len = agg->frame_count; |
| iwl4965_hwrate_to_tx_control(priv, agg->rate_n_flags, info); |
| |
| IWL_DEBUG_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); |
| |
| return 0; |
| } |
| |
| /** |
| * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration |
| */ |
| static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv, |
| u16 txq_id) |
| { |
| /* Simply stop the queue, but don't change any configuration; |
| * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ |
| iwl_write_prph(priv, |
| IWL49_SCD_QUEUE_STATUS_BITS(txq_id), |
| (0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)| |
| (1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); |
| } |
| |
| /** |
| * txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID |
| * priv->lock must be held by the caller |
| */ |
| static int iwl4965_tx_queue_agg_disable(struct iwl_priv *priv, u16 txq_id, |
| u16 ssn_idx, u8 tx_fifo) |
| { |
| int ret = 0; |
| |
| if (IWL_BACK_QUEUE_FIRST_ID > txq_id) { |
| IWL_WARNING("queue number too small: %d, must be > %d\n", |
| txq_id, IWL_BACK_QUEUE_FIRST_ID); |
| return -EINVAL; |
| } |
| |
| ret = iwl_grab_nic_access(priv); |
| if (ret) |
| return ret; |
| |
| iwl4965_tx_queue_stop_scheduler(priv, txq_id); |
| |
| iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); |
| |
| priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); |
| priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); |
| /* supposes that ssn_idx is valid (!= 0xFFF) */ |
| iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx); |
| |
| iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); |
| iwl_txq_ctx_deactivate(priv, txq_id); |
| iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0); |
| |
| iwl_release_nic_access(priv); |
| |
| return 0; |
| } |
| |
| int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, |
| u8 tid, int txq_id) |
| { |
| struct iwl_queue *q = &priv->txq[txq_id].q; |
| u8 *addr = priv->stations[sta_id].sta.sta.addr; |
| struct iwl_tid_data *tid_data = &priv->stations[sta_id].tid[tid]; |
| |
| switch (priv->stations[sta_id].tid[tid].agg.state) { |
| case IWL_EMPTYING_HW_QUEUE_DELBA: |
| /* We are reclaiming the last packet of the */ |
| /* aggregated HW queue */ |
| if (txq_id == tid_data->agg.txq_id && |
| q->read_ptr == q->write_ptr) { |
| u16 ssn = SEQ_TO_SN(tid_data->seq_number); |
| int tx_fifo = default_tid_to_tx_fifo[tid]; |
| IWL_DEBUG_HT("HW queue empty: continue DELBA flow\n"); |
| iwl4965_tx_queue_agg_disable(priv, txq_id, |
| ssn, tx_fifo); |
| tid_data->agg.state = IWL_AGG_OFF; |
| ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, addr, tid); |
| } |
| break; |
| case IWL_EMPTYING_HW_QUEUE_ADDBA: |
| /* We are reclaiming the last packet of the queue */ |
| if (tid_data->tfds_in_queue == 0) { |
| IWL_DEBUG_HT("HW queue empty: continue ADDBA flow\n"); |
| tid_data->agg.state = IWL_AGG_ON; |
| ieee80211_start_tx_ba_cb_irqsafe(priv->hw, addr, tid); |
| } |
| break; |
| } |
| return 0; |
| } |
| |
| /** |
| * iwl4965_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA |
| * |
| * Handles block-acknowledge notification from device, which reports success |
| * of frames sent via aggregation. |
| */ |
| static void iwl4965_rx_reply_compressed_ba(struct iwl_priv *priv, |
| struct iwl_rx_mem_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; |
| struct iwl4965_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; |
| int index; |
| struct iwl_tx_queue *txq = NULL; |
| struct iwl_ht_agg *agg; |
| DECLARE_MAC_BUF(mac); |
| |
| /* "flow" corresponds to Tx queue */ |
| u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); |
| |
| /* "ssn" is start of block-ack Tx window, corresponds to index |
| * (in Tx queue's circular buffer) of first TFD/frame in window */ |
| u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); |
| |
| if (scd_flow >= priv->hw_params.max_txq_num) { |
| IWL_ERROR("BUG_ON scd_flow is bigger than number of queues"); |
| return; |
| } |
| |
| txq = &priv->txq[scd_flow]; |
| agg = &priv->stations[ba_resp->sta_id].tid[ba_resp->tid].agg; |
| |
| /* Find index just before block-ack window */ |
| index = iwl_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); |
| |
| /* TODO: Need to get this copy more safely - now good for debug */ |
| |
| IWL_DEBUG_TX_REPLY("REPLY_COMPRESSED_BA [%d]Received from %s, " |
| "sta_id = %d\n", |
| agg->wait_for_ba, |
| print_mac(mac, (u8*) &ba_resp->sta_addr_lo32), |
| ba_resp->sta_id); |
| IWL_DEBUG_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx, scd_flow = " |
| "%d, scd_ssn = %d\n", |
| ba_resp->tid, |
| ba_resp->seq_ctl, |
| (unsigned long long)le64_to_cpu(ba_resp->bitmap), |
| ba_resp->scd_flow, |
| ba_resp->scd_ssn); |
| IWL_DEBUG_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx \n", |
| agg->start_idx, |
| (unsigned long long)agg->bitmap); |
| |
| /* Update driver's record of ACK vs. not for each frame in window */ |
| iwl4965_tx_status_reply_compressed_ba(priv, agg, ba_resp); |
| |
| /* Release all TFDs before the SSN, i.e. all TFDs in front of |
| * block-ack window (we assume that they've been successfully |
| * transmitted ... if not, it's too late anyway). */ |
| if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { |
| /* calculate mac80211 ampdu sw queue to wake */ |
| int ampdu_q = |
| scd_flow - IWL_BACK_QUEUE_FIRST_ID + priv->hw->queues; |
| int freed = iwl4965_tx_queue_reclaim(priv, scd_flow, index); |
| priv->stations[ba_resp->sta_id]. |
| tid[ba_resp->tid].tfds_in_queue -= freed; |
| if (iwl_queue_space(&txq->q) > txq->q.low_mark && |
| priv->mac80211_registered && |
| agg->state != IWL_EMPTYING_HW_QUEUE_DELBA) |
| ieee80211_wake_queue(priv->hw, ampdu_q); |
| iwl4965_check_empty_hw_queue(priv, ba_resp->sta_id, |
| ba_resp->tid, scd_flow); |
| } |
| } |
| |
| /** |
| * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue |
| */ |
| static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid, |
| u16 txq_id) |
| { |
| u32 tbl_dw_addr; |
| u32 tbl_dw; |
| u16 scd_q2ratid; |
| |
| scd_q2ratid = ra_tid & IWL49_SCD_QUEUE_RA_TID_MAP_RATID_MSK; |
| |
| tbl_dw_addr = priv->scd_base_addr + |
| IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); |
| |
| tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr); |
| |
| if (txq_id & 0x1) |
| tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); |
| else |
| tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); |
| |
| iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue |
| * |
| * NOTE: txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID, |
| * i.e. it must be one of the higher queues used for aggregation |
| */ |
| static int iwl4965_tx_queue_agg_enable(struct iwl_priv *priv, int txq_id, |
| int tx_fifo, int sta_id, int tid, |
| u16 ssn_idx) |
| { |
| unsigned long flags; |
| int rc; |
| u16 ra_tid; |
| |
| if (IWL_BACK_QUEUE_FIRST_ID > txq_id) |
| IWL_WARNING("queue number too small: %d, must be > %d\n", |
| txq_id, IWL_BACK_QUEUE_FIRST_ID); |
| |
| ra_tid = BUILD_RAxTID(sta_id, tid); |
| |
| /* Modify device's station table to Tx this TID */ |
| iwl4965_sta_modify_enable_tid_tx(priv, sta_id, tid); |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| rc = iwl_grab_nic_access(priv); |
| if (rc) { |
| spin_unlock_irqrestore(&priv->lock, flags); |
| return rc; |
| } |
| |
| /* Stop this Tx queue before configuring it */ |
| iwl4965_tx_queue_stop_scheduler(priv, txq_id); |
| |
| /* Map receiver-address / traffic-ID to this queue */ |
| iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id); |
| |
| /* Set this queue as a chain-building queue */ |
| iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); |
| |
| /* Place first TFD at index corresponding to start sequence number. |
| * Assumes that ssn_idx is valid (!= 0xFFF) */ |
| priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); |
| priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); |
| iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx); |
| |
| /* Set up Tx window size and frame limit for this queue */ |
| iwl_write_targ_mem(priv, |
| priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), |
| (SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & |
| IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); |
| |
| iwl_write_targ_mem(priv, priv->scd_base_addr + |
| IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), |
| (SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) |
| & IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); |
| |
| iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id)); |
| |
| /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ |
| iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1); |
| |
| iwl_release_nic_access(priv); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_IWL4965_HT */ |
| |
| |
| #ifdef CONFIG_IWL4965_HT |
| static int iwl4965_rx_agg_start(struct iwl_priv *priv, |
| const u8 *addr, int tid, u16 ssn) |
| { |
| unsigned long flags; |
| int sta_id; |
| |
| sta_id = iwl_find_station(priv, addr); |
| if (sta_id == IWL_INVALID_STATION) |
| return -ENXIO; |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| priv->stations[sta_id].sta.station_flags_msk = 0; |
| priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; |
| priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; |
| priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); |
| priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, |
| CMD_ASYNC); |
| } |
| |
| static int iwl4965_rx_agg_stop(struct iwl_priv *priv, |
| const u8 *addr, int tid) |
| { |
| unsigned long flags; |
| int sta_id; |
| |
| sta_id = iwl_find_station(priv, addr); |
| if (sta_id == IWL_INVALID_STATION) |
| return -ENXIO; |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| priv->stations[sta_id].sta.station_flags_msk = 0; |
| priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; |
| priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; |
| priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, |
| CMD_ASYNC); |
| } |
| |
| /* |
| * Find first available (lowest unused) Tx Queue, mark it "active". |
| * Called only when finding queue for aggregation. |
| * Should never return anything < 7, because they should already |
| * be in use as EDCA AC (0-3), Command (4), HCCA (5, 6). |
| */ |
| static int iwl4965_txq_ctx_activate_free(struct iwl_priv *priv) |
| { |
| int txq_id; |
| |
| for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) |
| if (!test_and_set_bit(txq_id, &priv->txq_ctx_active_msk)) |
| return txq_id; |
| return -1; |
| } |
| |
| static int iwl4965_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra, |
| u16 tid, u16 *start_seq_num) |
| { |
| struct iwl_priv *priv = hw->priv; |
| int sta_id; |
| int tx_fifo; |
| int txq_id; |
| int ssn = -1; |
| int ret = 0; |
| unsigned long flags; |
| struct iwl_tid_data *tid_data; |
| DECLARE_MAC_BUF(mac); |
| |
| if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo))) |
| tx_fifo = default_tid_to_tx_fifo[tid]; |
| else |
| return -EINVAL; |
| |
| IWL_WARNING("%s on ra = %s tid = %d\n", |
| __func__, print_mac(mac, ra), tid); |
| |
| sta_id = iwl_find_station(priv, ra); |
| if (sta_id == IWL_INVALID_STATION) |
| return -ENXIO; |
| |
| if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) { |
| IWL_ERROR("Start AGG when state is not IWL_AGG_OFF !\n"); |
| return -ENXIO; |
| } |
| |
| txq_id = iwl4965_txq_ctx_activate_free(priv); |
| if (txq_id == -1) |
| return -ENXIO; |
| |
| spin_lock_irqsave(&priv->sta_lock, flags); |
| tid_data = &priv->stations[sta_id].tid[tid]; |
| ssn = SEQ_TO_SN(tid_data->seq_number); |
| tid_data->agg.txq_id = txq_id; |
| spin_unlock_irqrestore(&priv->sta_lock, flags); |
| |
| *start_seq_num = ssn; |
| ret = iwl4965_tx_queue_agg_enable(priv, txq_id, tx_fifo, |
| sta_id, tid, ssn); |
| if (ret) |
| return ret; |
| |
| ret = 0; |
| if (tid_data->tfds_in_queue == 0) { |
| printk(KERN_ERR "HW queue is empty\n"); |
| tid_data->agg.state = IWL_AGG_ON; |
| ieee80211_start_tx_ba_cb_irqsafe(hw, ra, tid); |
| } else { |
| IWL_DEBUG_HT("HW queue is NOT empty: %d packets in HW queue\n", |
| tid_data->tfds_in_queue); |
| tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA; |
| } |
| return ret; |
| } |
| |
| static int iwl4965_tx_agg_stop(struct ieee80211_hw *hw, const u8 *ra, u16 tid) |
| { |
| struct iwl_priv *priv = hw->priv; |
| int tx_fifo_id, txq_id, sta_id, ssn = -1; |
| struct iwl_tid_data *tid_data; |
| int ret, write_ptr, read_ptr; |
| unsigned long flags; |
| DECLARE_MAC_BUF(mac); |
| |
| if (!ra) { |
| IWL_ERROR("ra = NULL\n"); |
| return -EINVAL; |
| } |
| |
| if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo))) |
| tx_fifo_id = default_tid_to_tx_fifo[tid]; |
| else |
| return -EINVAL; |
| |
| sta_id = iwl_find_station(priv, ra); |
| |
| if (sta_id == IWL_INVALID_STATION) |
| return -ENXIO; |
| |
| if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) |
| IWL_WARNING("Stopping AGG while state not IWL_AGG_ON\n"); |
| |
| tid_data = &priv->stations[sta_id].tid[tid]; |
| ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; |
| txq_id = tid_data->agg.txq_id; |
| write_ptr = priv->txq[txq_id].q.write_ptr; |
| read_ptr = priv->txq[txq_id].q.read_ptr; |
| |
| /* The queue is not empty */ |
| if (write_ptr != read_ptr) { |
| IWL_DEBUG_HT("Stopping a non empty AGG HW QUEUE\n"); |
| priv->stations[sta_id].tid[tid].agg.state = |
| IWL_EMPTYING_HW_QUEUE_DELBA; |
| return 0; |
| } |
| |
| IWL_DEBUG_HT("HW queue is empty\n"); |
| priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| ret = iwl4965_tx_queue_agg_disable(priv, txq_id, ssn, tx_fifo_id); |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| if (ret) |
| return ret; |
| |
| ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid); |
| |
| return 0; |
| } |
| |
| int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, |
| enum ieee80211_ampdu_mlme_action action, |
| const u8 *addr, u16 tid, u16 *ssn) |
| { |
| struct iwl_priv *priv = hw->priv; |
| DECLARE_MAC_BUF(mac); |
| |
| IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", |
| print_mac(mac, addr), tid); |
| |
| switch (action) { |
| case IEEE80211_AMPDU_RX_START: |
| IWL_DEBUG_HT("start Rx\n"); |
| return iwl4965_rx_agg_start(priv, addr, tid, *ssn); |
| case IEEE80211_AMPDU_RX_STOP: |
| IWL_DEBUG_HT("stop Rx\n"); |
| return iwl4965_rx_agg_stop(priv, addr, tid); |
| case IEEE80211_AMPDU_TX_START: |
| IWL_DEBUG_HT("start Tx\n"); |
| return iwl4965_tx_agg_start(hw, addr, tid, ssn); |
| case IEEE80211_AMPDU_TX_STOP: |
| IWL_DEBUG_HT("stop Tx\n"); |
| return iwl4965_tx_agg_stop(hw, addr, tid); |
| default: |
| IWL_DEBUG_HT("unknown\n"); |
| return -EINVAL; |
| break; |
| } |
| return 0; |
| } |
| #endif /* CONFIG_IWL4965_HT */ |
| |
| |
| static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len) |
| { |
| switch (cmd_id) { |
| case REPLY_RXON: |
| return (u16) sizeof(struct iwl4965_rxon_cmd); |
| default: |
| return len; |
| } |
| } |
| |
| static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data) |
| { |
| struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data; |
| addsta->mode = cmd->mode; |
| memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); |
| memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); |
| addsta->station_flags = cmd->station_flags; |
| addsta->station_flags_msk = cmd->station_flags_msk; |
| addsta->tid_disable_tx = cmd->tid_disable_tx; |
| addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; |
| addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; |
| addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; |
| addsta->reserved1 = __constant_cpu_to_le16(0); |
| addsta->reserved2 = __constant_cpu_to_le32(0); |
| |
| return (u16)sizeof(struct iwl4965_addsta_cmd); |
| } |
| /* Set up 4965-specific Rx frame reply handlers */ |
| static void iwl4965_rx_handler_setup(struct iwl_priv *priv) |
| { |
| /* Legacy Rx frames */ |
| priv->rx_handlers[REPLY_RX] = iwl4965_rx_reply_rx; |
| |
| /* High-throughput (HT) Rx frames */ |
| priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy; |
| priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx; |
| |
| priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] = |
| iwl4965_rx_missed_beacon_notif; |
| |
| #ifdef CONFIG_IWL4965_HT |
| priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl4965_rx_reply_compressed_ba; |
| #endif /* CONFIG_IWL4965_HT */ |
| } |
| |
| void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv) |
| { |
| INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work); |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| INIT_WORK(&priv->sensitivity_work, iwl4965_bg_sensitivity_work); |
| #endif |
| init_timer(&priv->statistics_periodic); |
| priv->statistics_periodic.data = (unsigned long)priv; |
| priv->statistics_periodic.function = iwl4965_bg_statistics_periodic; |
| } |
| |
| void iwl4965_hw_cancel_deferred_work(struct iwl_priv *priv) |
| { |
| del_timer_sync(&priv->statistics_periodic); |
| |
| cancel_delayed_work(&priv->init_alive_start); |
| } |
| |
| |
| static struct iwl_hcmd_ops iwl4965_hcmd = { |
| .rxon_assoc = iwl4965_send_rxon_assoc, |
| }; |
| |
| static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { |
| .get_hcmd_size = iwl4965_get_hcmd_size, |
| .build_addsta_hcmd = iwl4965_build_addsta_hcmd, |
| #ifdef CONFIG_IWL4965_RUN_TIME_CALIB |
| .chain_noise_reset = iwl4965_chain_noise_reset, |
| .gain_computation = iwl4965_gain_computation, |
| #endif |
| }; |
| |
| static struct iwl_lib_ops iwl4965_lib = { |
| .set_hw_params = iwl4965_hw_set_hw_params, |
| .alloc_shared_mem = iwl4965_alloc_shared_mem, |
| .free_shared_mem = iwl4965_free_shared_mem, |
| .shared_mem_rx_idx = iwl4965_shared_mem_rx_idx, |
| .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl, |
| .disable_tx_fifo = iwl4965_disable_tx_fifo, |
| .rx_handler_setup = iwl4965_rx_handler_setup, |
| .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, |
| .alive_notify = iwl4965_alive_notify, |
| .init_alive_start = iwl4965_init_alive_start, |
| .load_ucode = iwl4965_load_bsm, |
| .apm_ops = { |
| .init = iwl4965_apm_init, |
| .config = iwl4965_nic_config, |
| .set_pwr_src = iwl4965_set_pwr_src, |
| }, |
| .eeprom_ops = { |
| .regulatory_bands = { |
| EEPROM_REGULATORY_BAND_1_CHANNELS, |
| EEPROM_REGULATORY_BAND_2_CHANNELS, |
| EEPROM_REGULATORY_BAND_3_CHANNELS, |
| EEPROM_REGULATORY_BAND_4_CHANNELS, |
| EEPROM_REGULATORY_BAND_5_CHANNELS, |
| EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS, |
| EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS |
| }, |
| .verify_signature = iwlcore_eeprom_verify_signature, |
| .acquire_semaphore = iwlcore_eeprom_acquire_semaphore, |
| .release_semaphore = iwlcore_eeprom_release_semaphore, |
| .check_version = iwl4965_eeprom_check_version, |
| .query_addr = iwlcore_eeprom_query_addr, |
| }, |
| .radio_kill_sw = iwl4965_radio_kill_sw, |
| .set_power = iwl4965_set_power, |
| .update_chain_flags = iwl4965_update_chain_flags, |
| }; |
| |
| static struct iwl_ops iwl4965_ops = { |
| .lib = &iwl4965_lib, |
| .hcmd = &iwl4965_hcmd, |
| .utils = &iwl4965_hcmd_utils, |
| }; |
| |
| struct iwl_cfg iwl4965_agn_cfg = { |
| .name = "4965AGN", |
| .fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode", |
| .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, |
| .eeprom_size = IWL4965_EEPROM_IMG_SIZE, |
| .ops = &iwl4965_ops, |
| .mod_params = &iwl4965_mod_params, |
| }; |
| |
| module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444); |
| MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); |
| module_param_named(disable, iwl4965_mod_params.disable, int, 0444); |
| MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); |
| module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444); |
| MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n"); |
| module_param_named(debug, iwl4965_mod_params.debug, int, 0444); |
| MODULE_PARM_DESC(debug, "debug output mask"); |
| module_param_named( |
| disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444); |
| MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)"); |
| |
| module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444); |
| MODULE_PARM_DESC(queues_num, "number of hw queues."); |
| |
| /* QoS */ |
| module_param_named(qos_enable, iwl4965_mod_params.enable_qos, int, 0444); |
| MODULE_PARM_DESC(qos_enable, "enable all QoS functionality"); |
| module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444); |
| MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); |
| module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444); |
| MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error"); |