[PATCH] ARM: 2806/1: OMAP update 5/11: Move board files into mach-omap1 directory
Patch from Tony Lindgren
This patch by Paul Mundt and other OMAP developers
moves OMAP1 board files into mach-omap1 directory.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
new file mode 100644
index 0000000..02c7e33
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h2.c
+ *
+ * Board specific inits for OMAP-1610 H2
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * H2 specific changes and cleanup
+ * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+extern int omap_gpio_init(void);
+
+static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition h2_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data h2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = h2_partitions,
+ .nr_parts = ARRAY_SIZE(h2_partitions),
+};
+
+static struct resource h2_flash_resource = {
+ .start = OMAP_CS2B_PHYS,
+ .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device h2_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &h2_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &h2_flash_resource,
+};
+
+static struct resource h2_smc91x_resources[] = {
+ [0] = {
+ .start = OMAP1610_ETHR_START, /* Physical */
+ .end = OMAP1610_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(0),
+ .end = OMAP_GPIO_IRQ(0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device h2_smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(h2_smc91x_resources),
+ .resource = h2_smc91x_resources,
+};
+
+static struct platform_device *h2_devices[] __initdata = {
+ &h2_flash_device,
+ &h2_smc91x_device,
+};
+
+static void __init h2_init_smc91x(void)
+{
+ if ((omap_request_gpio(0)) < 0) {
+ printk("Error requesting gpio 0 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE);
+}
+
+void h2_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ h2_init_smc91x();
+}
+
+static struct omap_usb_config h2_usb_config __initdata = {
+ /* usb1 has a Mini-AB port and external isp1301 transceiver */
+ .otg = 2,
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
+ // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
+ .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
+#endif
+
+ .pins[1] = 3,
+};
+
+static struct omap_mmc_config h2_mmc_config __initdata = {
+ .mmc_blocks = 1,
+ .mmc1_power_pin = -1, /* tps65010 gpio3 */
+ .mmc1_switch_pin = OMAP_MPUIO(1),
+};
+
+static struct omap_board_config_kernel h2_config[] = {
+ { OMAP_TAG_USB, &h2_usb_config },
+ { OMAP_TAG_MMC, &h2_mmc_config },
+};
+
+static void __init h2_init(void)
+{
+ platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
+ omap_board_config = h2_config;
+ omap_board_config_size = ARRAY_SIZE(h2_config);
+}
+
+static void __init h2_map_io(void)
+{
+ omap_map_io();
+ omap_serial_init(h2_serial_ports);
+}
+
+MACHINE_START(OMAP_H2, "TI-H2")
+ /* Maintainer: Imre Deak <imre.deak@nokia.com> */
+ .phys_ram = 0x10000000,
+ .phys_io = 0xfff00000,
+ .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
+ .boot_params = 0x10000100,
+ .map_io = h2_map_io,
+ .init_irq = h2_init_irq,
+ .init_machine = h2_init,
+ .timer = &omap_timer,
+MACHINE_END