/*
 * Copyright (C) 2010 Trusted Logic S.A.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */
/******************************************************************************
 *
 *  The original Work has been changed by NXP Semiconductors.
 *
 *  Copyright (C) 2013-2019 NXP Semiconductors
 *   *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 ******************************************************************************/

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/miscdevice.h>
#include <linux/spinlock.h>
#include <asm/siginfo.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/sched/signal.h>
#include <linux/workqueue.h>
/* HiKey Compilation fix */
#define HiKey_620_COMPILATION_FIX 1
#ifndef HiKey_620_COMPILATION_FIX
#include <linux/wakelock.h>
#endif

#include <linux/timer.h>
#include <linux/clk.h>
#include "pn553.h"
//#ifdef OPLUS_FEATURE_NFC_CONSOFT
//Zhengzhou@CONNECTIVITY.NFC.BASIC,2674926, 2019/12/16,
//Add for : ST NXP chip common software
#include <soc/oppo/oppo_nfc.h>
//#endif /* OPLUS_FEATURE_NFC_CONSOFT */

#define NEXUS5x    0
#define HWINFO     0
#if NEXUS5x
#undef ISO_RST
#else
#define ISO_RST
#endif
#define DRAGON_NFC 1
#define SIG_NFC 44
#define MAX_BUFFER_SIZE 512
#define MAX_SECURE_SESSIONS 1
#define MSG_PROP_GID         0x4F
#define ESE_CLD_RST_OID      0x1E
#define ESE_CLD_RST_RSP_SIZE 0x04

//#ifdef VENDOR_EDIT
//wenjie.Liu@CN.NFC.Basic.CardEmulation.1790271, 2019/01/10,
//Add for :when phone is in sleep,wakeup AP
#define WAKEUP_SRC_TIMEOUT    (2000)
//#endif /* VENDOR_EDIT */

//#ifdef VENDOR_EDIT
//wenjie.Liu@CN.NFC.Basic.Hardware.1966808, 2019/04/17,
//Add for :control warnning print
#define DEBUG_GPIO_SWITCH 1
//#endif /* VENDOR_EDIT */

//#ifdef VENDOR_EDIT
//Weiwei.Deng@CN.NFC.Basic.Hardware,1908341, 2019/04/01,
//Add for : NFC_BAT_SCL(GPIO40) Electric leakage
#define MAX_RETRY_COUNT         3
#define NCI_RESET_CMD_LEN       4
#define NCI_INIT_CMD_LEN        3
#define NCI_RESET_RSP_LEN       6
#define NCI_INIT_RSP_LEN        28
#define NCI_GET_FW_CMD_LEN      8
#define NCI_GET_FW_RSP_LEN      14
//#endif /* VENDOR_EDIT */

//#ifdef VENDOR_EDIT
//Zhou.Zheng@CN.NFC.Basic.Hardware,2689816, 2019/12/18,
//Rewmove for : remove VEN_ALWAYS_ON
/* VEN is kept ON all the time if you define the macro VEN_ALWAYS_ON.
Used for SN100 usecases */
//#define VEN_ALWAYS_ON
/* Macro added to disable SVDD power toggling */
/* #define JCOP_4X_VALIDATION */
//#endif /* VENDOR_EDIT */

struct pn544_dev    {
    wait_queue_head_t   read_wq;
    struct mutex        read_mutex;
    //#ifdef VENDOR_EDIT
    //yukun.wang@CN.NFC.Basic.Hardware.1924483, 2019/04/03,
    //Add for: Add mutex to prevent re-init of dwp_onoff_sema
    struct mutex        dwp_mutex;
    //#endif /* VENDOR_EDIT */
    struct i2c_client   *client;
    struct miscdevice   pn544_device;
    unsigned int        ven_gpio;
    unsigned int        firm_gpio;
    unsigned int        irq_gpio;
    unsigned int        clkreq_gpio;
    unsigned int        ese_pwr_gpio; /* gpio used by SPI to provide power to p61 via NFCC */
#ifdef ISO_RST
    unsigned int        iso_rst_gpio; /* ISO-RST pin gpio*/
#endif
    struct mutex        p61_state_mutex; /* used to make p61_current_state flag secure */
    p61_access_state_t  p61_current_state; /* stores the current P61 state */
    bool                nfc_ven_enabled; /* stores the VEN pin state powered by Nfc */
    bool                spi_ven_enabled; /* stores the VEN pin state powered by Spi */
    //#ifndef VENDOR_EDIT
    //Zhou.Zheng@CN.NFC.Basic.CardEmulation.2331068, 2019/11/12,
    //Modify for :when phone is in sleep,wakeup AP
    //bool              irq_enabled;
    //#else
    volatile bool       irq_enabled;
    /* NFC_IRQ wake-up state */
    unsigned int        count_irq;
    bool                irq_wake_up;
    //#endif /* VENDOR_EDIT */
    spinlock_t          irq_enabled_lock;
    long                nfc_service_pid; /*used to signal the nfc the nfc service */
    chip_pwr_scheme_t   chip_pwr_scheme;
    unsigned int        secure_timer_cnt;
    struct workqueue_struct *pSecureTimerCbWq;
    struct work_struct wq_task;
  /* Bit value  Status           Remark
   * b0 : 1  -> NFC_ON           Driver Open should set the flag
   *      0     NFC_OFF          Driver release should reset this flag
   * b1 : 1  -> FWDNLD           If FWDNLD is going on.
   *      0     Normal operation
   * b2 : 1 -> ese_cold_reset sequence has been triggered from the SPI driver
   *      0 -> ese_cold_reset cmd has been written by the NFC HAL
   * bits b3 to b7 : Reserved for the future use.
   * NOTE: Driver probe function should reset b0-b2 flags.
   *       The value of b3-b7 flags is undetermined.
   * */
    volatile uint8_t    state_flags;
};
/* HiKey Compilation fix */
#ifndef HiKey_620_COMPILATION_FIX
struct wake_lock nfc_wake_lock;
#if HWINFO
struct hw_type_info hw_info;
#endif
static bool  sIsWakeLocked = false;
#endif
static struct pn544_dev *pn544_dev;
static struct semaphore ese_access_sema;
static struct semaphore svdd_sync_onoff_sema;
static struct completion dwp_onoff_sema;
static struct completion ese_cold_reset_sema;
static int8_t ese_cold_reset_rsp[ESE_CLD_RST_RSP_SIZE];
static struct timer_list secure_timer;
static void release_ese_lock(p61_access_state_t  p61_current_state);
int get_ese_lock(p61_access_state_t  p61_current_state, int timeout);
static long set_jcop_download_state(unsigned long arg);
static long start_seccure_timer(unsigned long timer_value);
static long secure_timer_operation(struct pn544_dev *pn544_dev, unsigned long arg);
#if HWINFO
static void check_hw_info(void);
#endif
#define SECURE_TIMER_WORK_QUEUE "SecTimerCbWq"

//#ifndef VENDOR_EDIT
//Zhou.Zheng@CN.NFC.Basic.CardEmulation.2331068, 2019/11/12,
//Add for :when phone is in sleep,wakeup AP
static void pn544_enable_irq(struct pn544_dev *pn544_dev) {
    unsigned long flags;
    spin_lock_irqsave(&pn544_dev->irq_enabled_lock, flags);
    if(!pn544_dev->irq_enabled) {
        pr_info("%s: enable irq", __func__);
        pn544_dev->irq_enabled = true;
        enable_irq(pn544_dev->client->irq);
    }
    spin_unlock_irqrestore(&pn544_dev->irq_enabled_lock, flags);
}
//#endif /* VENDOR_EDIT */

static void pn544_disable_irq(struct pn544_dev *pn544_dev)
{
    unsigned long flags;

    spin_lock_irqsave(&pn544_dev->irq_enabled_lock, flags);
    if (pn544_dev->irq_enabled) {
        disable_irq_nosync(pn544_dev->client->irq);
        //#ifndef VENDOR_EDIT
        //wenjie.Liu@CN.NFC.Basic.CardEmulation.1790271, 2019/01/10,
        //Remove for :when phone is in sleep,wakeup AP
        //disable_irq_wake(pn544_dev->client->irq);
        //#endif /* VENDOR_EDIT */
        pn544_dev->irq_enabled = false;
    }
    spin_unlock_irqrestore(&pn544_dev->irq_enabled_lock, flags);
}

static int pn544_dev_release(struct inode *inode, struct file *filp) {
    pn544_dev->state_flags = 0x00;
    if (pn544_dev->firm_gpio)
        gpio_set_value(pn544_dev->firm_gpio, 0);
    pr_info(KERN_ALERT "Exit %s: NFC driver release  nfc hal  \n", __func__);
    return 0;
}
static irqreturn_t pn544_dev_irq_handler(int irq, void *dev_id)
{
    struct pn544_dev *pn544_dev = dev_id;

    //#ifdef VENDOR_EDIT
    //wenjie.Liu@CN.NFC.Basic.CardEmulation.1790271, 2019/01/10,
    //Add for :when phone is in sleep,wakeup AP
    unsigned long flags;
    if (device_may_wakeup(&pn544_dev->client->dev))
    {
        pm_wakeup_event(&pn544_dev->client->dev, WAKEUP_SRC_TIMEOUT);
    }
    //#endif /* VENDOR_EDIT */
    pn544_disable_irq(pn544_dev);

    //#ifdef VENDOR_EDIT
    //Weiwei.Deng@CN.NFC.Basic.CardEmulation.1790271, 2019/02/02,
    //Add for :when phone is in sleep,wakeup AP
    spin_lock_irqsave(&pn544_dev->irq_enabled_lock, flags);
    pn544_dev->count_irq++;
    spin_unlock_irqrestore(&pn544_dev->irq_enabled_lock, flags);
    //#endif /* VENDOR_EDIT */
    /* HiKey Compilation fix */
    #ifndef HiKey_620_COMPILATION_FIX
    if (sIsWakeLocked == false)
    {
        wake_lock(&nfc_wake_lock);
        sIsWakeLocked = true;
    } else {
            pr_debug("%s already wake locked!\n", __func__);
    }
    #endif
    /* Wake up waiting readers */
    wake_up(&pn544_dev->read_wq);
    //#ifdef VENDOR_EDIT
    //Weiwei.Deng@CN.NFC.Basic.CardEmulation.1790271, 2019/02/02,
    //Add for :when phone is in sleep,wakeup AP
    printk("%s : IRQ trigger!\n", __func__);
    //#endif /* VENDOR_EDIT */

    return IRQ_HANDLED;
}

static void rcv_ese_cldrst_status(void)
{
    int ret = -1;
    char tmp[MAX_BUFFER_SIZE];
    size_t rcount = (size_t)ese_cold_reset_rsp[2];
    /* Read data: No need to wait for the interrupt */
    ret = i2c_master_recv(pn544_dev->client, tmp, rcount);
    if(ret == rcount){
        ese_cold_reset_rsp[3] = tmp[0];
        pr_info("%s NxpNciR : len = 4 > %02X%02X%02X%02X\n", __func__,ese_cold_reset_rsp[0],
                ese_cold_reset_rsp[1],ese_cold_reset_rsp[2],ese_cold_reset_rsp[3]);
    }else{
        pr_err("%s : Failed to receive payload of the cold_rst_cmd\n",__func__);
        ese_cold_reset_rsp[3] = -EIO;
    }
    if(pn544_dev->state_flags &(P544_FLAG_NFC_ON)){
        complete(&ese_cold_reset_sema);
    }
}

static ssize_t pn544_dev_read(struct file *filp, char __user *buf,
        size_t count, loff_t *offset)
{
    struct pn544_dev *pn544_dev = filp->private_data;
    char tmp[MAX_BUFFER_SIZE];
    int ret;

    if (count > MAX_BUFFER_SIZE)
        count = MAX_BUFFER_SIZE;

    //pr_debug("%s : reading   %zu bytes.\n", __func__, count);

    mutex_lock(&pn544_dev->read_mutex);

    if (!gpio_get_value(pn544_dev->irq_gpio)) {
        if (filp->f_flags & O_NONBLOCK) {
            ret = -EAGAIN;
            goto fail;
        }

        while (1) {
            //#ifndef VENDOR_EDIT
            //Zhou.Zheng@CN.NFC.Basic.CardEmulation.2331068, 2019/11/12,
            //Modify for :when phone is in sleep,wakeup AP
            //pn544_dev->irq_enabled = true;
            //enable_irq(pn544_dev->client->irq);
            //enable_irq_wake(pn544_dev->client->irq);
            //#else
            pn544_enable_irq(pn544_dev);
            //#endif /* VENDOR_EDIT */
            ret = wait_event_interruptible(
                    pn544_dev->read_wq,
                    !pn544_dev->irq_enabled);

            //#ifndef VENDOR_EDIT
            //Zhou.Zheng@CN.NFC.Basic.CardEmulation.2331068, 2019/11/12,
            //Remove for :when phone is in sleep,wakeup AP
            //pn544_disable_irq(pn544_dev);
            //#endif /* VENDOR_EDIT */

            if (ret)
                goto fail;
            if(pn544_dev->state_flags & P544_FLAG_NFC_VEN_RESET) {
                pr_warning("%s: releasing read  \n", __func__);
                pn544_dev->state_flags &= ~P544_FLAG_NFC_VEN_RESET;
                ret =  -EL3RST;
                goto fail;
            }

            //#ifndef VENDOR_EDIT
            //Zhou.Zheng@CN.NFC.Basic.CardEmulation.2331068, 2019/11/12,
            //Add for :when phone is in sleep,wakeup AP
            pn544_disable_irq(pn544_dev);
            //#endif /* VENDOR_EDIT */

            if (gpio_get_value(pn544_dev->irq_gpio))
                break;

            pr_warning("%s: spurious interrupt detected\n", __func__);
        }
    }

    /* Read data */
    ret = i2c_master_recv(pn544_dev->client, tmp, count);
    #ifndef HiKey_620_COMPILATION_FIX
    /* HiKey Compilation fix */
    if (sIsWakeLocked == true) {
        wake_unlock(&nfc_wake_lock);
        sIsWakeLocked = false;
    }
    #endif

    /* if the received response for COLD_RESET_COMMAND
     * Consume it in driver*/
    if((pn544_dev->state_flags & P544_FLAG_ESE_COLD_RESET_FROM_DRIVER) &&
            MSG_PROP_GID == tmp[0] && ESE_CLD_RST_OID == tmp[1]){
        memset(&ese_cold_reset_rsp, 0, sizeof(ese_cold_reset_rsp));
        memcpy(ese_cold_reset_rsp, tmp, 3);
        rcv_ese_cldrst_status();
        mutex_unlock(&pn544_dev->read_mutex);
        return 0;
    }
    mutex_unlock(&pn544_dev->read_mutex);

    /* pn544 seems to be slow in handling I2C read requests
     * so add 1ms delay after recv operation */
#if !NEXUS5x
    udelay(1000);
#endif

    if (ret < 0) {
        pr_err("%s:%d i2c_master_recv returned %d\n", __func__, __LINE__, ret);
        return ret;
    }
    if (ret > count) {
        pr_err("%s: received too many bytes from i2c (%d)\n",
                __func__, ret);
        return -EIO;
    }
    if (copy_to_user(buf, tmp, ret)) {
        pr_warning("%s : failed to copy to user space\n", __func__);
        return -EFAULT;
    }
    return ret;

    fail:
    mutex_unlock(&pn544_dev->read_mutex);
    return ret;
}

static ssize_t pn544_dev_write(struct file *filp, const char __user *buf,
        size_t count, loff_t *offset)
{
    struct pn544_dev  *pn544_dev;
    char tmp[MAX_BUFFER_SIZE];
    int ret;

    pn544_dev = filp->private_data;

    if (count > MAX_BUFFER_SIZE)
        count = MAX_BUFFER_SIZE;

    if (copy_from_user(tmp, buf, count)) {
        pr_err("%s : failed to copy from user space\n", __func__);
        return -EFAULT;
    }

    pr_debug("%s:%d try to writing %zu bytes.\n", __func__, __LINE__, count);
    /* Write data */
    ret = i2c_master_send(pn544_dev->client, tmp, count);
    if (ret != count) {
        pr_err("%s:%d i2c_master_send returned %d \n", __func__, __LINE__, ret);
        ret = -EIO;
    }
    /* pn544 seems to be slow in handling I2C write requests
     * so add 1ms delay after I2C send oparation */
    udelay(1000);

    return ret;
}

static void p61_update_access_state(struct pn544_dev *pn544_dev, p61_access_state_t current_state, bool set)
{
    pr_info("%s: Enter current_state = %x\n", __func__, pn544_dev->p61_current_state);
    if (current_state)
    {
        if(set){
            if(pn544_dev->p61_current_state == P61_STATE_IDLE)
                pn544_dev->p61_current_state = P61_STATE_INVALID;
            pn544_dev->p61_current_state |= current_state;
        }
        else{
            pn544_dev->p61_current_state ^= current_state;
            if(!pn544_dev->p61_current_state)
                pn544_dev->p61_current_state = P61_STATE_IDLE;
        }
    }
    pr_info("%s: Exit current_state = %x\n", __func__, pn544_dev->p61_current_state);
}

static void p61_get_access_state(struct pn544_dev *pn544_dev, p61_access_state_t *current_state)
{

    if (current_state == NULL) {
        //*current_state = P61_STATE_INVALID;
        pr_err("%s : invalid state of p61_access_state_t current state  \n", __func__);
    } else {
        *current_state = pn544_dev->p61_current_state;
    }
}
static void p61_access_lock(struct pn544_dev *pn544_dev)
{
    mutex_lock(&pn544_dev->p61_state_mutex);
}
static void p61_access_unlock(struct pn544_dev *pn544_dev)
{
    mutex_unlock(&pn544_dev->p61_state_mutex);
}

long p61_cold_reset(void)
{
    long ret = 0;
    unsigned int loop=0x03;
    struct file filp;
    int timeout = 2000; /* 2s timeout :NCI cmd timeout*/
    unsigned long tempJ = msecs_to_jiffies(timeout);
    uint8_t cmd_ese_cold_reset[] = {0x2F, 0x1E, 0x00};
    filp.private_data = pn544_dev;
    pr_info("%s: Enter", __func__);

    if(pn544_dev->state_flags & P544_FLAG_FW_DNLD){
      /* If FW DNLD, Operation is not permitted */
      pr_err("%s : Operation is not permitted during fwdnld\n", __func__);
      return -EPERM;
    }
    /* pn544_dev_read() should return the rsp if JNI has requested the cold reset*/
    pn544_dev->state_flags |= (P544_FLAG_ESE_COLD_RESET_FROM_DRIVER);
    init_completion(&ese_cold_reset_sema);
    /* write command to I2C line*/
    do{
        ret = i2c_master_send(pn544_dev->client, cmd_ese_cold_reset, sizeof(cmd_ese_cold_reset));
        if (ret == sizeof(cmd_ese_cold_reset)) {
            break;
        }
        loop--;
        usleep_range(5000, 6000);
    }while(loop);
    if(!loop && (ret != sizeof(cmd_ese_cold_reset)) ){
        pr_err("%s:%d i2c_master_send returned %ld\n", __func__, __LINE__, ret);
        pn544_dev->state_flags &= ~(P544_FLAG_ESE_COLD_RESET_FROM_DRIVER);
        return -EIO;
    }

    pr_info("%s: NxpNciX: %ld > %02X%02X%02X \n", __func__, ret,cmd_ese_cold_reset[0],
            cmd_ese_cold_reset[1],cmd_ese_cold_reset[2]);
    ret = 0x00;
    if(pn544_dev->state_flags & P544_FLAG_NFC_ON)/* NFC_ON */
    {
       /* Read is pending from the NFC service which will complete the ese_cold_reset_sema */
       if(wait_for_completion_timeout(&ese_cold_reset_sema, tempJ) == 0){
          pr_err("%s: Timeout", __func__);
          ese_cold_reset_rsp[3] = -EAGAIN; // Failure case
       }
    }else { /* NFC_OFF */
     /* call the pn544_dev_read() */
      filp.f_flags &= ~O_NONBLOCK;
      ret = pn544_dev_read(&filp, NULL,3, 0);
    }
    if(0x00 == ret) /* success case */
        ret = ese_cold_reset_rsp[3];
    pn544_dev->state_flags &= ~(P544_FLAG_ESE_COLD_RESET_FROM_DRIVER);
    /* Return the status to the SPI Driver */
    pr_info("%s: exit, Status:%ld", __func__,ret);
    return ret;
}
EXPORT_SYMBOL(p61_cold_reset);

static int signal_handler(p61_access_state_t state, long nfc_pid)
{
    struct siginfo sinfo;
    pid_t pid;
    struct task_struct *task;
    int sigret = 0, ret = 0;
    pr_info("%s: Enter\n", __func__);

    if(nfc_pid == 0)
    {
        pr_info("nfc_pid is clear don't call signal_handler.\n");
    }
    else
    {
        memset(&sinfo, 0, sizeof(struct siginfo));
        sinfo.si_signo = SIG_NFC;
        sinfo.si_code = SI_QUEUE;
        sinfo.si_int = state;
        pid = nfc_pid;

        task = pid_task(find_vpid(pid), PIDTYPE_PID);
        if(task)
        {
            pr_info("%s.\n", task->comm);
            sigret = force_sig_info(SIG_NFC, &sinfo, task);
            if(sigret < 0){
                pr_info("send_sig_info failed..... sigret %d.\n", sigret);
                ret = -1;
                //msleep(60);
            }
        }
        else{
             pr_info("finding task from PID failed\r\n");
             ret = -1;
        }
    }
    pr_info("%s: Exit ret = %d\n", __func__, ret);
    return ret;
}
static void svdd_sync_onoff(long nfc_service_pid, p61_access_state_t origin)
{
    int timeout = 100; //100 ms timeout
    unsigned long tempJ = msecs_to_jiffies(timeout);
    pr_info("%s: Enter nfc_service_pid: %ld\n", __func__, nfc_service_pid);
    if(nfc_service_pid)
    {
        if (0 == signal_handler(origin, nfc_service_pid))
        {
            sema_init(&svdd_sync_onoff_sema, 0);
            pr_info("Waiting for svdd protection response");
            if(down_timeout(&svdd_sync_onoff_sema, tempJ) != 0)
            {
                pr_info("svdd wait protection: Timeout");
            }
            pr_info("svdd wait protection : released");
        }
    }
}
static int release_svdd_wait(void)
{
    pr_info("%s: Enter \n", __func__);
    up(&svdd_sync_onoff_sema);
    return 0;
}

static void dwp_OnOff(long nfc_service_pid, p61_access_state_t origin)
{
    int timeout = 100; //100 ms timeout
    unsigned long tempJ = msecs_to_jiffies(timeout);
    if(nfc_service_pid)
    {
        if (0 == signal_handler(origin, nfc_service_pid))
        {
            init_completion(&dwp_onoff_sema);
            if(wait_for_completion_timeout(&dwp_onoff_sema, tempJ) != 0)
            {
                pr_info("Dwp On/off wait protection: Timeout");
            }
            pr_info("Dwp On/Off wait protection : released");
        }
    }
}
static int release_dwpOnOff_wait(void)
{
    pr_info("%s: Enter \n", __func__);
    complete(&dwp_onoff_sema);
    return 0;
}

//#ifdef VENDOR_EDIT
//Weiwei.Deng@CN.NFC.Basic.CardEmulation.1790271, 2019/02/02,
//Add for :when phone is in sleep,wakeup AP
static void pn544_init_stat(struct pn544_dev *pn544_dev)
{
    pn544_dev->count_irq = 0;
}
//#endif /* VENDOR_EDIT */
static int pn544_dev_open(struct inode *inode, struct file *filp)
{
    struct pn544_dev *pn544_dev = container_of(filp->private_data,
            struct pn544_dev,
            pn544_device);

    filp->private_data = pn544_dev;
    //#ifdef VENDOR_EDIT
    //Weiwei.Deng@CN.NFC.Basic.CardEmulation.1790271, 2019/02/02,
    //Add for :when phone is in sleep,wakeup AP
    pn544_init_stat(pn544_dev);
    //#endif /* VENDOR_EDIT */
    pn544_dev->state_flags |= (P544_FLAG_NFC_ON);
    pr_debug("%s : %d,%d\n", __func__, imajor(inode), iminor(inode));

    return 0;
}

static int set_nfc_pid(unsigned long arg)
{
    pr_info("%s : The NFC Service PID is %ld\n", __func__, arg);
    pn544_dev->nfc_service_pid = arg;
    return 0;
}

long  pn544_dev_ioctl(struct file *filp, unsigned int cmd,
        unsigned long arg)
{
    /* Free pass autobahn area, not protected. Use it carefullly. START */
    switch(cmd)
    {
        case P544_GET_ESE_ACCESS:
            return get_ese_lock(P61_STATE_WIRED, arg);
        break;
        case P544_REL_SVDD_WAIT:
            return release_svdd_wait();
        break;
        case P544_SET_NFC_SERVICE_PID:
            return set_nfc_pid(arg);
        break;
        case P544_REL_DWPONOFF_WAIT:
            return release_dwpOnOff_wait();
        break;
        default:
        break;
    }
    /* Free pass autobahn area, not protected. Use it carefullly. END */

    p61_access_lock(pn544_dev);
    switch (cmd) {
    case PN544_SET_PWR:
    {
        p61_access_state_t current_state = P61_STATE_INVALID;
        p61_get_access_state(pn544_dev, &current_state);
        if (arg == 2) {
            if (current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO) && (pn544_dev->chip_pwr_scheme != PN80T_EXT_PMU_SCHEME))
            {
                /* NFCC fw/download should not be allowed if p61 is used
                 * by SPI
                 */
                pr_info("%s NFCC should not be allowed to reset/FW download \n", __func__);
                p61_access_unlock(pn544_dev);
                return -EBUSY; /* Device or resource busy */
            }
            pn544_dev->nfc_ven_enabled = true;
            if ((pn544_dev->spi_ven_enabled == false && !(pn544_dev->secure_timer_cnt))
            || (pn544_dev->chip_pwr_scheme == PN80T_EXT_PMU_SCHEME))
            {
                /* power on with firmware download (requires hw reset)
                 */
                pr_info("%s power on with firmware\n", __func__);
                gpio_set_value(pn544_dev->ven_gpio, 1);
                msleep(10);
                if (pn544_dev->firm_gpio) {
                    p61_update_access_state(pn544_dev, P61_STATE_DWNLD, true);
                    gpio_set_value(pn544_dev->firm_gpio, 1);
                }

                msleep(10);
                gpio_set_value(pn544_dev->ven_gpio, 0);
                msleep(10);
                gpio_set_value(pn544_dev->ven_gpio, 1);
                msleep(10);
            }
        } else if (arg == 1) {
            /* power on */
            if (pn544_dev->firm_gpio) {
                if ((current_state & (P61_STATE_WIRED|P61_STATE_SPI|P61_STATE_SPI_PRIO))== 0){
                    p61_update_access_state(pn544_dev, P61_STATE_IDLE, true);
                }
                if(current_state & P61_STATE_DWNLD){
                    p61_update_access_state(pn544_dev, P61_STATE_DWNLD, false);
                }
                gpio_set_value(pn544_dev->firm_gpio, 0);
            }

            pn544_dev->nfc_ven_enabled = true;
            #ifndef VEN_ALWAYS_ON
            if (pn544_dev->spi_ven_enabled == false || (pn544_dev->chip_pwr_scheme == PN80T_EXT_PMU_SCHEME)) {
                gpio_set_value(pn544_dev->ven_gpio, 1);
            }
            #endif
        } else if (arg == 0) {
            /* power off */
            if (pn544_dev->firm_gpio) {
                if ((current_state & (P61_STATE_WIRED|P61_STATE_SPI|P61_STATE_SPI_PRIO))== 0){
                    p61_update_access_state(pn544_dev, P61_STATE_IDLE, true);
                }
                gpio_set_value(pn544_dev->firm_gpio, 0);
            }

            pn544_dev->nfc_ven_enabled = false;
            /* Don't change Ven state if spi made it high */
            #ifndef VEN_ALWAYS_ON
            if ((pn544_dev->spi_ven_enabled == false && !(pn544_dev->secure_timer_cnt))
            || (pn544_dev->chip_pwr_scheme == PN80T_EXT_PMU_SCHEME)) {
                gpio_set_value(pn544_dev->ven_gpio, 0);
            }
            #endif
            /* HiKey Compilation fix */
            #ifndef HiKey_620_COMPILATION_FIX
            if (sIsWakeLocked == true) {
                wake_unlock(&nfc_wake_lock);
                sIsWakeLocked = false;
            }
            #endif
        } else if (arg == 3) {
            /*NFC Service called ISO-RST*/
            p61_access_state_t current_state = P61_STATE_INVALID;
            p61_get_access_state(pn544_dev, &current_state);
            if(current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) {
                p61_access_unlock(pn544_dev);
                return -EPERM; /* Operation not permitted */
            }
            if(current_state & P61_STATE_WIRED) {
                p61_update_access_state(pn544_dev, P61_STATE_WIRED, false);
            }
#ifdef ISO_RST
            gpio_set_value(pn544_dev->iso_rst_gpio, 0);
            msleep(50);
            gpio_set_value(pn544_dev->iso_rst_gpio, 1);
            msleep(50);
            pr_info("%s ISO RESET from DWP DONE\n", __func__);
#endif
        } else if (arg == 4) {
            pr_info("%s FW dwldioctl called from NFC \n", __func__);
            /*NFC Service called FW dwnld*/
            if (pn544_dev->firm_gpio) {
                p61_update_access_state(pn544_dev, P61_STATE_DWNLD, true);
                gpio_set_value(pn544_dev->firm_gpio, 1);
                pn544_dev->state_flags |= (P544_FLAG_FW_DNLD);
                msleep(10);
            }
        } else if (arg == 5) {
            pn544_dev->state_flags |= P544_FLAG_NFC_VEN_RESET;
            pn544_disable_irq(pn544_dev);
            wake_up(&pn544_dev->read_wq);
            msleep(10);
            gpio_set_value(pn544_dev->ven_gpio, 0);
            msleep(10);
            gpio_set_value(pn544_dev->ven_gpio, 1);
            msleep(10);
            pr_info("%s VEN reset DONE >>>>>>>\n", __func__);
        }  else if (arg == 6) {
            if (pn544_dev->firm_gpio) {
                gpio_set_value(pn544_dev->firm_gpio, 0);
                pn544_dev->state_flags &= ~(P544_FLAG_FW_DNLD);
            }
            pr_info("%s FW GPIO set to 0x00 >>>>>>>\n", __func__);
        }else {
            pr_err("%s bad arg %lu\n", __func__, arg);
            /* changed the p61 state to idle*/
            p61_access_unlock(pn544_dev);
            return -EINVAL;
        }
    }
    break;
    case P61_SET_SPI_PWR:
    {
        p61_access_state_t current_state = P61_STATE_INVALID;
        p61_get_access_state(pn544_dev, &current_state);
        if (arg == 1) {
            pr_info("%s : PN61_SET_SPI_PWR - power on ese\n", __func__);
            if ((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0)
            {
                p61_update_access_state(pn544_dev, P61_STATE_SPI, true);
                /*To handle triple mode protection signal
                NFC service when SPI session started*/
                if (!(current_state & P61_STATE_JCP_DWNLD)){
                    if(pn544_dev->nfc_service_pid){
                        pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                        /*signal_handler(P61_STATE_SPI, pn544_dev->nfc_service_pid);*/
                        //#ifndef VENDOR_EDIT
                        //yukun.wang@CN.NFC.Basic.Hardware.1924483, 2019/04/03,
                        //Modify for: Add mutex to prevent re-init of dwp_onoff_sema
                        /*
                        dwp_OnOff(pn544_dev->nfc_service_pid, P61_STATE_SPI);
                        */
                        //#else
                        mutex_lock(&pn544_dev->dwp_mutex);
                        dwp_OnOff(pn544_dev->nfc_service_pid, P61_STATE_SPI);
                        mutex_unlock(&pn544_dev->dwp_mutex);
                        //#endif /* VENDOR_EDIT */
                    }
                    else{
                        pr_info(" invalid nfc service pid....signalling failed%s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                    }
                }
                pn544_dev->spi_ven_enabled = true;

                if(pn544_dev->chip_pwr_scheme == PN80T_EXT_PMU_SCHEME)
                    break;
                #ifndef VEN_ALWAYS_ON
                if (pn544_dev->nfc_ven_enabled == false)
                {
                    /* provide power to NFCC if, NFC service not provided */
                    gpio_set_value(pn544_dev->ven_gpio, 1);
                    msleep(10);
                }
                #endif
                /* pull the gpio to high once NFCC is power on*/
                gpio_set_value(pn544_dev->ese_pwr_gpio, 1);

                /* Delay (10ms) after SVDD_PWR_ON to allow JCOP to bootup (5ms jcop boot time + 5ms guard time) */
                usleep_range(10000, 12000);

            } else {
                pr_info("%s : PN61_SET_SPI_PWR -  power on ese failed \n", __func__);
                p61_access_unlock(pn544_dev);
                return -EBUSY; /* Device or resource busy */
            }
        } else if (arg == 0) {
            pr_info("%s : PN61_SET_SPI_PWR - power off ese\n", __func__);
            if(current_state & P61_STATE_SPI_PRIO){
                p61_update_access_state(pn544_dev, P61_STATE_SPI_PRIO, false);
                if (!(current_state & P61_STATE_JCP_DWNLD))
                {
                    if(pn544_dev->nfc_service_pid){
                        pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                        if(!(current_state & P61_STATE_WIRED))
                        {
                            svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START |
                                                     P61_STATE_SPI_PRIO_END);
                        }else {
                            signal_handler(P61_STATE_SPI_PRIO_END, pn544_dev->nfc_service_pid);
                        }
                    }
                    else{
                        pr_info(" invalid nfc service pid....signalling failed%s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                    }
                } else if (!(current_state & P61_STATE_WIRED)) {
                    svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START);
                }
                pn544_dev->spi_ven_enabled = false;

                if(pn544_dev->chip_pwr_scheme == PN80T_EXT_PMU_SCHEME)
                    break;

                /* if secure timer is running, Delay the SPI close by 25ms after sending End of Apdu to enable eSE go into DPD
                    gracefully (20ms after EOS + 5ms DPD settlement time) */
                if(pn544_dev->secure_timer_cnt)
                    usleep_range(25000, 30000);

                if (!(current_state & P61_STATE_WIRED) && !(pn544_dev->secure_timer_cnt))
                {
#ifndef JCOP_4X_VALIDATION
                    gpio_set_value(pn544_dev->ese_pwr_gpio, 0);
                    /* Delay (2.5ms) after SVDD_PWR_OFF for the shutdown settlement time */
                    usleep_range(2500, 3000);
#endif
                    svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_END);
                }
#ifndef JCOP_4X_VALIDATION
                #ifndef VEN_ALWAYS_ON
                if ((pn544_dev->nfc_ven_enabled == false) && !(pn544_dev->secure_timer_cnt)) {
                     gpio_set_value(pn544_dev->ven_gpio, 0);
                     msleep(10);
                }
                #endif
#endif
              }else if(current_state & P61_STATE_SPI){
                  p61_update_access_state(pn544_dev, P61_STATE_SPI, false);
                  if (!(current_state & P61_STATE_WIRED) &&
                      (pn544_dev->chip_pwr_scheme != PN80T_EXT_PMU_SCHEME) &&
                      !(current_state & P61_STATE_JCP_DWNLD))
                  {
                      if(pn544_dev->nfc_service_pid){
                          pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                          svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START | P61_STATE_SPI_END);
                       }
                       else{
                           pr_info(" invalid nfc service pid....signalling failed%s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                       }
                       /* if secure timer is running, Delay the SPI close by 25ms after sending End of Apdu to enable eSE go into DPD
                            gracefully (20ms after EOS + 5ms DPD settlement time) */
                       if(pn544_dev->secure_timer_cnt)
                            usleep_range(25000, 30000);

                      if (!(pn544_dev->secure_timer_cnt)) {
#ifndef JCOP_4X_VALIDATION
                          gpio_set_value(pn544_dev->ese_pwr_gpio, 0);
                          /* Delay (2.5ms) after SVDD_PWR_OFF for the shutdown settlement time */
                          usleep_range(2500, 3000);
#endif
                          svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_END);
                       }
                  }
                  /*If JCOP3.2 or 3.3 for handling triple mode
                  protection signal NFC service */
                  else
                  {
                      if (!(current_state & P61_STATE_JCP_DWNLD))
                      {
                          if(pn544_dev->nfc_service_pid){
                              pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                              if(pn544_dev->chip_pwr_scheme == PN80T_LEGACY_PWR_SCHEME)
                              {
                                  svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START | P61_STATE_SPI_END);
                              } else {
                                  signal_handler(P61_STATE_SPI_END, pn544_dev->nfc_service_pid);
                              }
                           }
                           else{
                               pr_info(" invalid nfc service pid....signalling failed%s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                           }
                      } else if (pn544_dev->chip_pwr_scheme == PN80T_LEGACY_PWR_SCHEME) {
                          svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START);
                      }
                      if(pn544_dev->chip_pwr_scheme == PN80T_LEGACY_PWR_SCHEME)
                      {
#ifndef JCOP_4X_VALIDATION
                          gpio_set_value(pn544_dev->ese_pwr_gpio, 0);
#endif
                          svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_END);
                          pr_info("PN80T legacy ese_pwr_gpio off %s", __func__);
                      }
                  }
                  pn544_dev->spi_ven_enabled = false;
#ifndef VEN_ALWAYS_ON
                  if (pn544_dev->nfc_ven_enabled == false && (pn544_dev->chip_pwr_scheme != PN80T_EXT_PMU_SCHEME)
                       && !(pn544_dev->secure_timer_cnt)) {
                      gpio_set_value(pn544_dev->ven_gpio, 0);
                      msleep(10);
                  }
#endif
            } else {
                pr_err("%s : PN61_SET_SPI_PWR - failed, current_state = %x \n",
                        __func__, pn544_dev->p61_current_state);
                p61_access_unlock(pn544_dev);
                return -EPERM; /* Operation not permitted */
            }
        }else if (arg == 2) {
            pr_info("%s : PN61_SET_SPI_PWR - reset\n", __func__);
            if (current_state & (P61_STATE_IDLE|P61_STATE_SPI|P61_STATE_SPI_PRIO)) {
                if (pn544_dev->spi_ven_enabled == false)
                {
                    pn544_dev->spi_ven_enabled = true;
                    #ifndef VEN_ALWAYS_ON
                    if ((pn544_dev->nfc_ven_enabled == false) && (pn544_dev->chip_pwr_scheme != PN80T_EXT_PMU_SCHEME)) {
                        /* provide power to NFCC if, NFC service not provided */
                        gpio_set_value(pn544_dev->ven_gpio, 1);
                        msleep(10);
                    }
                    #endif
                }
                if(pn544_dev->chip_pwr_scheme != PN80T_EXT_PMU_SCHEME  && !(pn544_dev->secure_timer_cnt))
                {
                    svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START);
#ifndef JCOP_4X_VALIDATION
                    gpio_set_value(pn544_dev->ese_pwr_gpio, 0);
#endif
                    svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_END);
                    msleep(10);
                    if(!gpio_get_value(pn544_dev->ese_pwr_gpio))
                        gpio_set_value(pn544_dev->ese_pwr_gpio, 1);
                    msleep(10);
                }
            } else {
                pr_info("%s : PN61_SET_SPI_PWR - reset  failed \n", __func__);
                p61_access_unlock(pn544_dev);
                return -EBUSY; /* Device or resource busy */
            }
        }else if (arg == 3) {
            pr_info("%s : PN61_SET_SPI_PWR - Prio Session Start power on ese\n", __func__);
            if ((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0) {
                p61_update_access_state(pn544_dev, P61_STATE_SPI_PRIO, true);
                if (current_state & P61_STATE_WIRED){
                    if(pn544_dev->nfc_service_pid){
                        pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                        /*signal_handler(P61_STATE_SPI_PRIO, pn544_dev->nfc_service_pid);*/
                        dwp_OnOff(pn544_dev->nfc_service_pid, P61_STATE_SPI_PRIO);
                    }
                    else{
                        pr_info(" invalid nfc service pid....signalling failed%s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                    }
                }
                pn544_dev->spi_ven_enabled = true;
                if(pn544_dev->chip_pwr_scheme != PN80T_EXT_PMU_SCHEME)
                {
                    #ifndef VEN_ALWAYS_ON
                    if (pn544_dev->nfc_ven_enabled == false) {
                        /* provide power to NFCC if, NFC service not provided */
                        gpio_set_value(pn544_dev->ven_gpio, 1);
                        msleep(10);
                    }
                    #endif
                    /* pull the gpio to high once NFCC is power on*/
                    gpio_set_value(pn544_dev->ese_pwr_gpio, 1);

                    /* Delay (10ms) after SVDD_PWR_ON to allow JCOP to bootup (5ms jcop boot time + 5ms guard time) */
                    usleep_range(10000, 12000);
                }
            }else {
                pr_info("%s : Prio Session Start power on ese failed \n", __func__);
                p61_access_unlock(pn544_dev);
                return -EBUSY; /* Device or resource busy */
            }
        }else if (arg == 4) {
            if (current_state & P61_STATE_SPI_PRIO)
            {
                pr_info("%s : PN61_SET_SPI_PWR - Prio Session Ending...\n", __func__);
                p61_update_access_state(pn544_dev, P61_STATE_SPI_PRIO, false);
                /*after SPI prio timeout, the state is changing from SPI prio to SPI */
                p61_update_access_state(pn544_dev, P61_STATE_SPI, true);
                if (current_state & P61_STATE_WIRED)
                {
                    if(pn544_dev->nfc_service_pid){
                        pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                        signal_handler(P61_STATE_SPI_PRIO_END, pn544_dev->nfc_service_pid);
                    }
                    else{
                        pr_info(" invalid nfc service pid....signalling failed%s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                    }
               }
            }
            else
            {
                pr_info("%s : PN61_SET_SPI_PWR -  Prio Session End failed \n", __func__);
                p61_access_unlock(pn544_dev);
                return -EBADRQC; /* Device or resource busy */
            }
        } else if(arg == 5){
            release_ese_lock(P61_STATE_SPI);
        } else if (arg == 6) {
            /*SPI Service called ISO-RST*/
            p61_access_state_t current_state = P61_STATE_INVALID;
            p61_get_access_state(pn544_dev, &current_state);
            if(current_state & P61_STATE_WIRED) {
                p61_access_unlock(pn544_dev);
                return -EPERM; /* Operation not permitted */
            }
            if(current_state & P61_STATE_SPI) {
                p61_update_access_state(pn544_dev, P61_STATE_SPI, false);
            }else if(current_state & P61_STATE_SPI_PRIO) {
                p61_update_access_state(pn544_dev, P61_STATE_SPI_PRIO, false);
            }
#ifdef ISO_RST
            gpio_set_value(pn544_dev->iso_rst_gpio, 0);
            msleep(50);
            gpio_set_value(pn544_dev->iso_rst_gpio, 1);
            msleep(50);
            pr_info("%s ISO RESET from SPI DONE\n", __func__);
#endif
        }
        else {
            pr_info("%s bad ese pwr arg %lu\n", __func__, arg);
            p61_access_unlock(pn544_dev);
            return -EBADRQC; /* Invalid request code */
        }
    }
    break;

    case P61_GET_PWR_STATUS:
    {
        p61_access_state_t current_state = P61_STATE_INVALID;
        p61_get_access_state(pn544_dev, &current_state);
        pr_info("%s: P61_GET_PWR_STATUS  = %x",__func__, current_state);
        put_user(current_state, (int __user *)arg);
    }
    break;

    case PN544_SET_DWNLD_STATUS:
    {
        long ret;
        ret = set_jcop_download_state(arg);
        if(ret < 0)
        {
            p61_access_unlock(pn544_dev);
            return ret;
        }
    }
    break;

    case P61_SET_WIRED_ACCESS:
    {
        p61_access_state_t current_state = P61_STATE_INVALID;
        p61_get_access_state(pn544_dev, &current_state);
        if (arg == 1)
        {
            if (current_state)
            {
                pr_info("%s : P61_SET_WIRED_ACCESS - enabling\n", __func__);
                p61_update_access_state(pn544_dev, P61_STATE_WIRED, true);
                if (current_state & P61_STATE_SPI_PRIO)
                {
                    if(pn544_dev->nfc_service_pid){
                        pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                        signal_handler(P61_STATE_SPI_PRIO, pn544_dev->nfc_service_pid);
                    }
                    else{
                        pr_info(" invalid nfc service pid....signalling failed%s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                    }
                }
                if((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0 && (pn544_dev->chip_pwr_scheme == PN67T_PWR_SCHEME))
                    gpio_set_value(pn544_dev->ese_pwr_gpio, 1);
            } else {
                pr_info("%s : P61_SET_WIRED_ACCESS -  enabling failed \n", __func__);
                p61_access_unlock(pn544_dev);
                return -EBUSY; /* Device or resource busy */
            }
        } else if (arg == 0) {
            pr_info("%s : P61_SET_WIRED_ACCESS - disabling \n", __func__);
            if (current_state & P61_STATE_WIRED){
                p61_update_access_state(pn544_dev, P61_STATE_WIRED, false);
                if((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0 && (pn544_dev->chip_pwr_scheme == PN67T_PWR_SCHEME))
                {
                    svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START);
                    gpio_set_value(pn544_dev->ese_pwr_gpio, 0);
                    svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_END);
                }
            } else {
                pr_err("%s : P61_SET_WIRED_ACCESS - failed, current_state = %x \n",
                        __func__, pn544_dev->p61_current_state);
                p61_access_unlock(pn544_dev);
                return -EPERM; /* Operation not permitted */
            }
        }
        else if(arg == 2)
        {
             pr_info("%s : P61_ESE_GPIO_LOW  \n", __func__);
             if(pn544_dev->chip_pwr_scheme == PN67T_PWR_SCHEME)
             {
                 svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_START);
                 gpio_set_value(pn544_dev->ese_pwr_gpio, 0);
                 svdd_sync_onoff(pn544_dev->nfc_service_pid, P61_STATE_SPI_SVDD_SYNC_END);
             }
        }
        else if(arg == 3)
        {
            pr_info("%s : P61_ESE_GPIO_HIGH  \n", __func__);
            if(pn544_dev->chip_pwr_scheme == PN67T_PWR_SCHEME)
            gpio_set_value(pn544_dev->ese_pwr_gpio, 1);
        }
        else if(arg == 4)
        {
            release_ese_lock(P61_STATE_WIRED);
        }
        else {
             pr_info("%s P61_SET_WIRED_ACCESS - bad arg %lu\n", __func__, arg);
             p61_access_unlock(pn544_dev);
             return -EBADRQC; /* Invalid request code */
        }
    }
    break;
    case P544_SET_POWER_SCHEME:
    {
        if(arg == PN67T_PWR_SCHEME)
        {
            pn544_dev->chip_pwr_scheme = PN67T_PWR_SCHEME;
            pr_info("%s : The power scheme is set to PN67T legacy \n", __func__);
        }
        else if(arg == PN80T_LEGACY_PWR_SCHEME)
        {
            pn544_dev->chip_pwr_scheme = PN80T_LEGACY_PWR_SCHEME;
            pr_info("%s : The power scheme is set to PN80T_LEGACY_PWR_SCHEME,\n", __func__);
        }
        else if(arg == PN80T_EXT_PMU_SCHEME)
        {
            pn544_dev->chip_pwr_scheme = PN80T_EXT_PMU_SCHEME;
            pr_info("%s : The power scheme is set to PN80T_EXT_PMU_SCHEME,\n", __func__);
        }
        else
        {
            pr_info("%s : The power scheme is invalid,\n", __func__);
        }
    }
    break;
    case P544_SECURE_TIMER_SESSION:
    {
       secure_timer_operation(pn544_dev, arg);
    }
    break;
    default:
        pr_err("%s bad ioctl %u\n", __func__, cmd);
        p61_access_unlock(pn544_dev);
        return -EINVAL;
    }
    p61_access_unlock(pn544_dev);
    return 0;
}
EXPORT_SYMBOL(pn544_dev_ioctl);

static void secure_timer_workqueue(struct work_struct *Wq)
{
  p61_access_state_t current_state = P61_STATE_INVALID;
  printk( KERN_INFO "secure_timer_callback: called (%lu).\n", jiffies);
  /* Locking the critical section: ESE_PWR_OFF to allow eSE to shutdown peacefully :: START */
  get_ese_lock(P61_STATE_WIRED, MAX_ESE_ACCESS_TIME_OUT_MS);
  p61_update_access_state(pn544_dev, P61_STATE_SECURE_MODE, false);
  p61_get_access_state(pn544_dev, &current_state);

  if((current_state & (P61_STATE_SPI|P61_STATE_SPI_PRIO)) == 0)
  {
      printk( KERN_INFO "secure_timer_callback: make se_pwer_gpio low, state = %d", current_state);
      gpio_set_value(pn544_dev->ese_pwr_gpio, 0);
      /* Delay (2.5ms) after SVDD_PWR_OFF for the shutdown settlement time */
      usleep_range(2500, 3000);
      #ifndef VEN_ALWAYS_ON
      if(pn544_dev->nfc_service_pid == 0x00)
      {
          gpio_set_value(pn544_dev->ven_gpio, 0);
          printk( KERN_INFO "secure_timer_callback :make ven_gpio low, state = %d", current_state);
      }
      #endif
  }
  pn544_dev->secure_timer_cnt = 0;
  /* Locking the critical section: ESE_PWR_OFF to allow eSE to shutdown peacefully :: END */
  release_ese_lock(P61_STATE_WIRED);
  return;
}

static void secure_timer_callback( struct timer_list *t )
{
    /* Flush and push the timer callback event to the bottom half(work queue)
    to be executed later, at a safer time */
    flush_workqueue(pn544_dev->pSecureTimerCbWq);
    queue_work(pn544_dev->pSecureTimerCbWq, &pn544_dev->wq_task);
    return;
}

static long start_seccure_timer(unsigned long timer_value)
{
    long ret = -EINVAL;
    pr_info("start_seccure_timer: enter\n");
    /* Delete the timer if timer pending */
    if(timer_pending(&secure_timer) == 1)
    {
        pr_info("start_seccure_timer: delete pending timer \n");
        /* delete timer if already pending */
        del_timer(&secure_timer);
    }
    /* Start the timer if timer value is non-zero */
    if(timer_value)
    {
        //init_timer(&secure_timer);
        //setup_timer( &secure_timer, secure_timer_callback, 0 );
		timer_setup(&secure_timer, secure_timer_callback, 0);

        pr_info("start_seccure_timer: timeout %lums (%lu)\n",timer_value, jiffies );
        ret = mod_timer( &secure_timer, jiffies + msecs_to_jiffies(timer_value));
        if (ret)
            pr_info("start_seccure_timer: Error in mod_timer\n");
    }
    return ret;
}

static long secure_timer_operation(struct pn544_dev *pn544_dev, unsigned long arg)
{
    long ret = -EINVAL;
    unsigned long timer_value =  arg;

    printk( KERN_INFO "secure_timer_operation, %d\n",pn544_dev->chip_pwr_scheme);
    if(pn544_dev->chip_pwr_scheme == PN80T_LEGACY_PWR_SCHEME)
    {
        ret = start_seccure_timer(timer_value);
        if(!ret)
        {
            pn544_dev->secure_timer_cnt  = 1;
            p61_update_access_state(pn544_dev, P61_STATE_SECURE_MODE, true);
        }
        else
        {
            pn544_dev->secure_timer_cnt  = 0;
            p61_update_access_state(pn544_dev, P61_STATE_SECURE_MODE, false);
            pr_info("%s :Secure timer reset \n", __func__);
        }
    }
    else
    {
        pr_info("%s :Secure timer session not applicable  \n", __func__);
    }
    return ret;
}

static long set_jcop_download_state(unsigned long arg)
{
        p61_access_state_t current_state = P61_STATE_INVALID;
        long ret = 0;
        p61_get_access_state(pn544_dev, &current_state);
        pr_info("%s:Enter PN544_SET_DWNLD_STATUS:JCOP Dwnld state arg = %ld",__func__, arg);
        if(arg == JCP_DWNLD_INIT)
        {
            if(pn544_dev->nfc_service_pid)
            {
                pr_info("nfc service pid %s   ---- %ld", __func__, pn544_dev->nfc_service_pid);
                signal_handler((p61_access_state_t)JCP_DWNLD_INIT, pn544_dev->nfc_service_pid);
            }
            else
            {
                if (current_state & P61_STATE_JCP_DWNLD)
                {
                    ret = -EINVAL;
                }
                else
                {
                    p61_update_access_state(pn544_dev, P61_STATE_JCP_DWNLD, true);
                }
            }
        }
        else if (arg == JCP_DWNLD_START)
        {
            if (current_state & P61_STATE_JCP_DWNLD)
            {
                ret = -EINVAL;
            }
            else
            {
                p61_update_access_state(pn544_dev, P61_STATE_JCP_DWNLD, true);
            }
        }
        else if (arg == JCP_SPI_DWNLD_COMPLETE)
        {
            if(pn544_dev->nfc_service_pid)
            {
                signal_handler((p61_access_state_t)JCP_DWP_DWNLD_COMPLETE, pn544_dev->nfc_service_pid);
            }
            p61_update_access_state(pn544_dev, P61_STATE_JCP_DWNLD, false);
        }
        else if (arg == JCP_DWP_DWNLD_COMPLETE)
        {
            p61_update_access_state(pn544_dev, P61_STATE_JCP_DWNLD, false);
        }
        else
        {
            pr_info("%s bad ese pwr arg %lu\n", __func__, arg);
            p61_access_unlock(pn544_dev);
            return -EBADRQC; /* Invalid request code */
        }
        pr_info("%s: PN544_SET_DWNLD_STATUS  = %x",__func__, current_state);

    return ret;
}

int get_ese_lock(p61_access_state_t  p61_current_state, int timeout)
{
    unsigned long tempJ = msecs_to_jiffies(timeout);
    if(down_timeout(&ese_access_sema, tempJ) != 0)
    {
        printk("get_ese_lock: timeout p61_current_state = %d\n", p61_current_state);
        return -EBUSY;
    }
    return 0;
}
EXPORT_SYMBOL(get_ese_lock);

static void release_ese_lock(p61_access_state_t  p61_current_state)
{
    up(&ese_access_sema);
}


static const struct file_operations pn544_dev_fops = {
        .owner  = THIS_MODULE,
        .llseek = no_llseek,
        .read   = pn544_dev_read,
        .write  = pn544_dev_write,
        .open   = pn544_dev_open,
        .release = pn544_dev_release,
        .unlocked_ioctl  = pn544_dev_ioctl,
};
#if DRAGON_NFC
static int pn544_parse_dt(struct device *dev,
    struct pn544_i2c_platform_data *data)
{
    struct device_node *np = dev->of_node;
    int errorno = 0;

   pr_info("%s:%d Enter", __func__, __LINE__);
#if !NEXUS5x
        data->irq_gpio = of_get_named_gpio(np, "nxp,pn544-irq", 0);
        if ((!gpio_is_valid(data->irq_gpio)))
        {
            pr_info("%s:%d debug", __func__, __LINE__);
            return -EINVAL;
        }

        data->ven_gpio = of_get_named_gpio(np, "nxp,pn544-ven", 0);
        if ((!gpio_is_valid(data->ven_gpio)))
        {
            pr_info("%s:%d debug", __func__, __LINE__);
            return -EINVAL;
        }

        data->firm_gpio = of_get_named_gpio(np, "nxp,pn544-fw-dwnld", 0);
        if ((!gpio_is_valid(data->firm_gpio)))
        {
            pr_info("%s:%d debug", __func__, __LINE__);
            return -EINVAL;
        }
        data->ese_pwr_gpio = of_get_named_gpio(np, "nxp,pn544-ese-pwr", 0);
        if ((!gpio_is_valid(data->ese_pwr_gpio)))
        {
            pr_info("%s:%d debug", __func__, __LINE__);
        //    return -EINVAL;
        }
        data->iso_rst_gpio = of_get_named_gpio(np, "nxp,pn544-iso-pwr-rst", 0);
        if ((!gpio_is_valid(data->iso_rst_gpio)))
        {
            pr_info("%s:%d debug", __func__, __LINE__);
          //  return -EINVAL;
        }
#else
        data->ven_gpio = of_get_named_gpio_flags(np,
                                        "nxp,gpio_ven", 0, NULL);
        data->firm_gpio = of_get_named_gpio_flags(np,
                                        "nxp,gpio_mode", 0, NULL);
        data->irq_gpio = of_get_named_gpio_flags(np,
                                        "nxp,gpio_irq", 0, NULL);
#endif
    //#ifdef VENDOR_EDIT
    //wenjie.Liu@CN.NFC.Basic.Hardware.1966808, 2019/04/17,
    //Add for :control warnning print
    #if DEBUG_GPIO_SWITCH
    pr_info("%s:%d  irq:%d, ven:%d, firm:%d, %d, %d error:%d\n", __func__, __LINE__,
        data->irq_gpio, data->ven_gpio, data->firm_gpio, data->iso_rst_gpio,
        data->ese_pwr_gpio, errorno);
    #endif
    //#endif VENDOR_EDI

    return errorno;
}
#endif


//#ifdef VENDOR_EDIT
//Weiwei.Deng@CN.NFC.Basic.Hardware,1908341, 2019/04/01,
//Add for : NFC_BAT_SCL(GPIO40) Electric leakage
/**
 * nqx_standby_write()
 * @buf: pointer to data buffer
 * @len:  # of bytes need to transfer
 *
 * write data buffer over I2C and retry
 * if NFCC is in stand by mode
 *
 * Return: # of bytes written or -ve value in case of error
 */
/*
static int nqx_standby_write(struct pn544_dev *nqx_dev,
				const unsigned char *buf, size_t len)
{
    int ret = -EINVAL;
    int retry_cnt;

    for (retry_cnt = 1; retry_cnt <= MAX_RETRY_COUNT; retry_cnt++) {
        ret = i2c_master_send(nqx_dev->client, buf, len);
        if (ret < 0) {
            pr_err("%s: write failed, Maybe in Standby Mode - Retry(%d)\n",__func__, retry_cnt);
            usleep_range(1000, 1100);
        } else if (ret == len) {
            break;
        }
    }
    return ret;
}
*/
/* Check for availability of NQ_ NFC controller hardware */
static int nfcc_hw_check(struct i2c_client *client, struct pn544_dev *nqx_dev)
{
    int ret = 0;
#ifndef VENDOR_EDIT
    //Weiwei.Deng@CN.NFC.Basic.Hardware.1209105, 2019/04/25,
    //Modify for : send get firmware version
    int gpio_retry_count = 0;
    unsigned int enable_gpio = nqx_dev->ven_gpio;
    char *nci_reset_cmd = NULL;
    char *nci_init_cmd = NULL;
    char *nci_init_rsp = NULL;
    char *nci_reset_rsp = NULL;

    pr_info("%s:%d Enter", __func__, __LINE__);
    nci_reset_cmd = kzalloc(NCI_RESET_CMD_LEN + 1, GFP_DMA | GFP_KERNEL);
    if (!nci_reset_cmd) {
        ret = -ENOMEM;
        goto done;
    }

    pr_info("%s:%d Enter", __func__, __LINE__);
    nci_reset_rsp = kzalloc(NCI_RESET_RSP_LEN + 1,  GFP_DMA | GFP_KERNEL);
    if (!nci_reset_rsp) {
        ret = -ENOMEM;
        goto done;
    }

    nci_init_cmd = kzalloc(NCI_INIT_CMD_LEN + 1,  GFP_DMA | GFP_KERNEL);
    if (!nci_init_cmd) {
        ret = -ENOMEM;
        goto done;
    }

    nci_init_rsp = kzalloc(NCI_INIT_RSP_LEN + 1,  GFP_DMA | GFP_KERNEL);
    if (!nci_init_rsp) {
        ret = -ENOMEM;
        goto done;
    }

reset_enable_gpio:
    /* making sure that the NFCC starts in a clean state. */
    gpio_set_value(enable_gpio, 0);/* ULPM: Disable */
    /* hardware dependent delay */
    usleep_range(10000, 10100);
    gpio_set_value(enable_gpio, 1);/* HPD : Enable*/
    /* hardware dependent delay */
    usleep_range(10000, 10100);

    nci_reset_cmd[0] = 0x20;
    nci_reset_cmd[1] = 0x00;
    nci_reset_cmd[2] = 0x01;
    nci_reset_cmd[3] = 0x00;
    /* send NCI CORE RESET CMD with Keep Config parameters */
    pr_info("%s:%d Enter", __func__, __LINE__);
    ret = i2c_master_send(client, nci_reset_cmd, NCI_RESET_CMD_LEN);
    if (ret < 0) {
        pr_err("%s: - i2c_master_send core reset Error\n", __func__);
    }
    /* hardware dependent delay */
    msleep(30);

    pr_info("%s:%d Enter", __func__, __LINE__);
    /* Read Response of RESET command */
    ret = i2c_master_recv(client, nci_reset_rsp, NCI_RESET_RSP_LEN);
    if (ret < 0) {
        pr_err("%s: - i2c_master_recv Error\n", __func__);
        gpio_retry_count = gpio_retry_count + 1;
        if (gpio_retry_count < MAX_RETRY_COUNT)
            goto reset_enable_gpio;
        goto err_nfcc_hw_check;
    }
    nci_init_cmd[0] = 0x20;
    nci_init_cmd[1] = 0x01;
    nci_init_cmd[2] = 0x00;

    pr_info("%s:%d Enter", __func__, __LINE__);
    ret = nqx_standby_write(nqx_dev, nci_init_cmd, NCI_INIT_CMD_LEN);
    if (ret < 0) {
        pr_err("%s: - i2c_master_send failed for Core INIT\n", __func__);
        goto err_nfcc_core_init_fail;
    }
    /* hardware dependent delay */
    msleep(30);
    /* Read Response of INIT command */
    ret = i2c_master_recv(client, nci_init_rsp, NCI_INIT_RSP_LEN);
    if (ret < 0) {
        pr_err("%s: - i2c_master_recv Error\n", __func__);
        goto err_nfcc_core_init_fail;
    }
    gpio_set_value(enable_gpio, 0);
    goto done;

err_nfcc_core_init_fail:
    pr_err("%s: err_nfcc_core_init_fail\n",__func__);

err_nfcc_hw_check:
    ret = -ENXIO;
    pr_err("%s: - NFCC HW not available\n", __func__);

done:
    kfree(nci_reset_rsp);
    kfree(nci_init_rsp);
    kfree(nci_init_cmd);
    kfree(nci_reset_cmd);
#else
    unsigned int enable_gpio = nqx_dev->ven_gpio;
    unsigned int firm_gpio = nqx_dev->firm_gpio;
    char *nci_get_fw_cmd = NULL;
    char *nci_get_fw_rsp = NULL;

    pr_info("%s:%d Enter", __func__, __LINE__);
    nci_get_fw_cmd = kzalloc(NCI_GET_FW_CMD_LEN + 1, GFP_DMA | GFP_KERNEL);
    if (!nci_get_fw_cmd) {
        ret = -ENOMEM;
        goto done;
    }

    nci_get_fw_rsp = kzalloc(NCI_GET_FW_RSP_LEN + 1,  GFP_DMA | GFP_KERNEL);
    if (!nci_get_fw_rsp) {
        ret = -ENOMEM;
        goto done;
    }

    gpio_set_value(firm_gpio, 1);
    /* hardware dependent delay */
    usleep_range(10000, 10100);
    /* making sure that the NFCC starts in a clean state. */
    gpio_set_value(enable_gpio, 0);/* ULPM: Disable */
    /* hardware dependent delay */
    usleep_range(10000, 10100);
    gpio_set_value(enable_gpio, 1);/* HPD : Enable*/
    /* hardware dependent delay */
    usleep_range(10000, 10100);

    nci_get_fw_cmd[0] = 0x00;
    nci_get_fw_cmd[1] = 0x04;
    nci_get_fw_cmd[2] = 0xF1;
    nci_get_fw_cmd[3] = 0x00;
    nci_get_fw_cmd[4] = 0x00;
    nci_get_fw_cmd[5] = 0x00;
    nci_get_fw_cmd[6] = 0x6E;
    nci_get_fw_cmd[7] = 0xEF;

    pr_info("%s:%d Enter", __func__, __LINE__);
    /*send get FW Version CMD */
    ret = i2c_master_send(client, nci_get_fw_cmd, NCI_GET_FW_CMD_LEN);
    if (ret < 0) {
        pr_err("%s: - i2c_master_send get fw version Error\n", __func__);
        goto err_nfcc_hw_check;
    }
    pr_err("%s: raw_fw_get_version success----\n", __func__);
    /* hardware dependent delay */
    msleep(30);

    pr_info("%s:%d Enter i2c_master_recv", __func__, __LINE__);
    /* Read Response of FW Version CMD */
    ret = i2c_master_recv(client, nci_get_fw_rsp, NCI_GET_FW_RSP_LEN);
	
	pr_err("%s:%d FW: %02x.%02x.%02x",__func__, __LINE__, nci_get_fw_rsp[4],nci_get_fw_rsp[7], nci_get_fw_rsp[6]);
    if (ret < 0) {
        pr_err("%s: - i2c_master_recv get fw version Error\n", __func__);
        goto err_nfcc_hw_check;
    }
    gpio_set_value(firm_gpio, 0);
    gpio_set_value(enable_gpio, 0);
    ret = 0;

    pr_info("%s:%d goto done", __func__, __LINE__);
    goto done;

err_nfcc_hw_check:
    ret = -ENXIO;
    pr_err("%s: - NFCC HW not available\n", __func__);

done:
    kfree(nci_get_fw_rsp);
    kfree(nci_get_fw_cmd);
#endif /* VENDOR_EDIT */

    return ret;
}
//#endif /* VENDOR_EDIT */

static int pn544_probe(struct i2c_client *client,
        const struct i2c_device_id *id)
{
    int ret = 0;
    struct pn544_i2c_platform_data *platform_data;
    struct device_node *node = NULL;
    //struct pn544_dev *pn544_dev;

    dev_err(&client->dev,
                "nfc-nci probe: start\n");

    //#ifdef OPLUS_FEATURE_NFC_CONSOFT
    //Zhengzhou@CONNECTIVITY.NFC.BASIC,2674926, 2019/12/16,
    //Add for : ST NXP chip common software
    CHECK_NFC_CHIP(SN100T);
    //#endif /* OPLUS_FEATURE_NFC_CONSOFT */

#if !DRAGON_NFC
    platform_data = client->dev.platform_data;
#else
    node = client->dev.of_node;

    if (node) {
        platform_data = devm_kzalloc(&client->dev,
            sizeof(struct pn544_i2c_platform_data), GFP_KERNEL);
        if (!platform_data) {
            dev_err(&client->dev,
                "nfc-nci probe: Failed to allocate memory\n");
            return -ENOMEM;
        }
        ret = pn544_parse_dt(&client->dev, platform_data);
        if (ret)
        {
            pr_info("%s pn544_parse_dt failed", __func__);
        }
        client->irq = gpio_to_irq(platform_data->irq_gpio);
        if (client->irq < 0)
        {
            pr_info("%s gpio to irq failed", __func__);
        }
    } else {
        platform_data = client->dev.platform_data;
    }
#endif
    if (platform_data == NULL) {
        pr_err("%s : nfc probe fail\n", __func__);
        return  -ENODEV;
    }

    if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
        pr_err("%s : need I2C_FUNC_I2C\n", __func__);
        return  -ENODEV;
    }
#if !DRAGON_NFC
    ret = gpio_request(platform_data->irq_gpio, "nfc_int");
    if (ret)
        return  -ENODEV;
    ret = gpio_request(platform_data->ven_gpio, "nfc_ven");
    if (ret)
        goto err_ven;
    ret = gpio_request(platform_data->ese_pwr_gpio, "nfc_ese_pwr");
    if (ret)
        goto err_ese_pwr;
    if (platform_data->firm_gpio) {
        ret = gpio_request(platform_data->firm_gpio, "nfc_firm");
        if (ret)
            goto err_firm;
    }
#ifdef ISO_RST
    if(platform_data->iso_rst_gpio) {
        ret = gpio_request(platform_data->iso_rst_gpio, "nfc_iso_rst");
        if (ret)
            goto err_iso_rst;
    }
#endif
#endif
    pn544_dev = kzalloc(sizeof(*pn544_dev), GFP_KERNEL);
    if (pn544_dev == NULL) {
        dev_err(&client->dev,
                "failed to allocate memory for module data\n");
        ret = -ENOMEM;
        goto err_exit;
    }

    pn544_dev->irq_gpio = platform_data->irq_gpio;
    pn544_dev->ven_gpio  = platform_data->ven_gpio;
    pn544_dev->firm_gpio  = platform_data->firm_gpio;
    pn544_dev->ese_pwr_gpio  = platform_data->ese_pwr_gpio;
#ifdef ISO_RST
    pn544_dev->iso_rst_gpio = platform_data->iso_rst_gpio;
#endif
    pn544_dev->p61_current_state = P61_STATE_IDLE;
    pn544_dev->nfc_ven_enabled = false;
    pn544_dev->spi_ven_enabled = false;
    pn544_dev->chip_pwr_scheme = PN67T_PWR_SCHEME;
    pn544_dev->client   = client;
    pn544_dev->secure_timer_cnt = 0;

    pn544_dev->state_flags = 0x00;
    ret = gpio_direction_input(pn544_dev->irq_gpio);
    if (ret < 0) {
        pr_err("%s :not able to set irq_gpio as input\n", __func__);
        goto err_ven;
    }
    #ifndef VEN_ALWAYS_ON
    ret = gpio_direction_output(pn544_dev->ven_gpio, 0);
    if (ret < 0) {
        pr_err("%s : not able to set ven_gpio as output\n", __func__);
        goto err_firm;
    }
    #else
    ret = gpio_direction_output(pn544_dev->ven_gpio, 1);
    if (ret < 0) {
        pr_err("%s : not able to set ven_gpio as output\n", __func__);
        goto err_firm;
    }
    #endif
    ret = gpio_direction_output(pn544_dev->ese_pwr_gpio, 0);
    if (ret < 0) {
        pr_err("%s : not able to set ese_pwr gpio as output\n", __func__);
        goto err_ese_pwr;
    }
    if (platform_data->firm_gpio) {
        ret = gpio_direction_output(pn544_dev->firm_gpio, 0);
        if (ret < 0) {
            pr_err("%s : not able to set firm_gpio as output\n",
                    __func__);
            goto err_exit;
        }
    }
#ifdef ISO_RST
    ret = gpio_direction_output(pn544_dev->iso_rst_gpio, 0);
    if (ret < 0) {
        pr_err("%s : not able to set iso rst gpio as output\n", __func__);
        goto err_iso_rst;
    }
#endif
    /* init mutex and queues */
    init_waitqueue_head(&pn544_dev->read_wq);
    mutex_init(&pn544_dev->read_mutex);
    //#ifdef VENDOR_EDIT
    //yukun.wang@CN.NFC.Basic.Hardware.1924483, 2019/04/03,
    //Add for: Add mutex to prevent re-init of dwp_onoff_sema
    mutex_init(&pn544_dev->dwp_mutex);
    //#endif /* VENDOR_EDIT */
    sema_init(&ese_access_sema, 1);
    mutex_init(&pn544_dev->p61_state_mutex);
    spin_lock_init(&pn544_dev->irq_enabled_lock);
    pn544_dev->pSecureTimerCbWq = create_workqueue(SECURE_TIMER_WORK_QUEUE);
    INIT_WORK(&pn544_dev->wq_task, secure_timer_workqueue);
    pn544_dev->pn544_device.minor = MISC_DYNAMIC_MINOR;
    pn544_dev->pn544_device.name = "nq-nci";
    pn544_dev->pn544_device.fops = &pn544_dev_fops;

    ret = misc_register(&pn544_dev->pn544_device);
    if (ret) {
        pr_err("%s : misc_register failed\n", __FILE__);
        goto err_misc_register;
    }
    /* HiKey Compilation fix */
    #ifndef HiKey_620_COMPILATION_FIX
    wake_lock_init(&nfc_wake_lock, WAKE_LOCK_SUSPEND, "NFCWAKE");
    #endif
#ifdef ISO_RST
    /* Setting ISO RESET pin high to power ESE during init */
    gpio_set_value(pn544_dev->iso_rst_gpio, 1);
#endif
    /* request irq.  the irq is set whenever the chip has data available
     * for reading.  it is cleared when all data has been read.
     */
    //#ifdef VENDOR_EDIT
    //wenjie.Liu@CN.NFC.Basic.Hardware.1966808, 2019/04/17,
    //Add for :control warnning print
    #if DEBUG_GPIO_SWITCH
    pr_info("%s : requesting IRQ %d\n", __func__, client->irq);
    #endif
    //#endif VENDOR_EDIT
    pn544_dev->irq_enabled = true;
    pr_info("%s:%d debugxxx", __func__, __LINE__);
    ret = request_irq(client->irq, pn544_dev_irq_handler,
            IRQF_TRIGGER_HIGH, client->name, pn544_dev);
    if (ret) {
        dev_err(&client->dev, "request_irq failed\n");
        goto err_request_irq_failed;
    }
    enable_irq_wake(pn544_dev->client->irq);
    pr_info("%s:%d debugxxx", __func__, __LINE__);
//#ifdef VENDOR_EDIT
//wenjie.Liu@CN.NFC.Basic.CardEmulation.1790271, 2019/01/10,
//Add for :when phone is in sleep,wakeup AP
    device_init_wakeup(&client->dev, true);
    device_set_wakeup_capable(&client->dev, true);
//#endif /* VENDOR_EDIT */
    pn544_disable_irq(pn544_dev);
    i2c_set_clientdata(client, pn544_dev);
    //#ifdef VENDOR_EDIT
    //Weiwei.Deng@CN.NFC.Basic.Hardware,1908341, 2019/04/01,
    //Add for : NFC_BAT_SCL(GPIO40) Electric leakage
    /*
     * To be efficient we need to test whether nfcc hardware is physically
     * present before attempting further hardware initialisation.
     *
     */
    pr_info("%s:%d debugxxx", __func__, __LINE__);
    ret = nfcc_hw_check(client, pn544_dev);
    if (ret < 0) {
        pr_err("%s: - nfcc_hw_check fail \n", __func__);
        /* make sure NFCC is not enabled */
        gpio_set_value(pn544_dev->firm_gpio, 0);
        gpio_set_value(pn544_dev->ven_gpio, 0);
        /* We don't think there is hardware switch NFC OFF */
        //#ifdef VENDOR_EDIT
        //Weiwei.Deng@CN.NFC.Basic.Hardware,1983368, 2019/04/26,
        //Del for : do not del the nfc node if nfcc_hw_check fail
        //goto err_request_irq_failed;
        //#endif /* VENDOR_EDIT */
    }
    //#endif /* VENDOR_EDIT */
#ifdef VEN_ALWAYS_ON
    msleep(5); /* VBAT--> VDDIO(HIGH) + Guardtime of min 5ms --> VEN(HIGH) */
    /* VEN toggle(reset) to proceed */
    gpio_set_value(pn544_dev->ven_gpio, 0);
    msleep(5);
    gpio_set_value(pn544_dev->ven_gpio, 1);
#endif

#if HWINFO
    /*
     * This function is used only if
     * hardware info is required during probe*/
    check_hw_info();
#endif

    pr_info("%s:%d probe scuessfully", __func__, __LINE__);
    return 0;

    err_request_irq_failed:
    misc_deregister(&pn544_dev->pn544_device);
    err_misc_register:
    mutex_destroy(&pn544_dev->read_mutex);
    //#ifdef VENDOR_EDIT
    //yukun.wang@CN.NFC.Basic.Hardware.1924483, 2019/04/03,
    //Add for: Add mutex to prevent re-init of dwp_onoff_sema
    mutex_destroy(&pn544_dev->dwp_mutex);
    //#endif /* VENDOR_EDIT */
    mutex_destroy(&pn544_dev->p61_state_mutex);
    //#ifdef VENDOR_EDIT
    //Zhou.Zheng@CN.NFC.Basic.Hardware.2331068, 2019/11/14,
    //Remove for: Coverity check 81487, do not kfree(pn544_dev) here, free it before return
    //kfree(pn544_dev);
    //#endif /* VENDOR_EDIT */
    err_exit:
    if (pn544_dev->firm_gpio)
        gpio_free(platform_data->firm_gpio);
    err_firm:
    gpio_free(platform_data->ese_pwr_gpio);
    err_ese_pwr:
    gpio_free(platform_data->ven_gpio);
    err_ven:
    gpio_free(platform_data->irq_gpio);
#ifdef ISO_RST
    err_iso_rst:
    gpio_free(platform_data->iso_rst_gpio);
#endif
    //#ifdef VENDOR_EDIT
    //Zhou.Zheng@CN.NFC.Basic.Hardware.2331068, 2019/11/14,
    //Remove for: Coverity check 81487, do not kfree(pn544_dev) here, free it before return
    kfree(pn544_dev);
    //#endif /* VENDOR_EDIT */
    return ret;
}

static int pn544_remove(struct i2c_client *client)
{
    struct pn544_dev *pn544_dev;

    pn544_dev = i2c_get_clientdata(client);
    free_irq(client->irq, pn544_dev);
    misc_deregister(&pn544_dev->pn544_device);
    mutex_destroy(&pn544_dev->read_mutex);
    mutex_destroy(&pn544_dev->p61_state_mutex);
    //#ifdef VENDOR_EDIT
    //yukun.wang@CN.NFC.Basic.Hardware.1924483, 2019/04/03,
    //Add for: Add mutex to prevent re-init of dwp_onoff_sema
    mutex_destroy(&pn544_dev->dwp_mutex);
    //#endif /* VENDOR_EDIT */
    gpio_free(pn544_dev->irq_gpio);
    gpio_free(pn544_dev->ven_gpio);
    gpio_free(pn544_dev->ese_pwr_gpio);
    destroy_workqueue(pn544_dev->pSecureTimerCbWq);
#ifdef ISO_RST
    gpio_free(pn544_dev->iso_rst_gpio);
#endif
    pn544_dev->p61_current_state = P61_STATE_INVALID;
    pn544_dev->nfc_ven_enabled = false;
    pn544_dev->spi_ven_enabled = false;

    if (pn544_dev->firm_gpio)
        gpio_free(pn544_dev->firm_gpio);
    kfree(pn544_dev);

    return 0;
}

//#ifdef VENDOR_EDIT
//wenjie.Liu@CN.NFC.Basic.CardEmulation.1790271, 2019/01/10,
//Add for :when phone is in sleep,wakeup AP
static int pn544_suspend(struct device *device)
{
    struct i2c_client *client = to_i2c_client(device);
    pn544_dev = i2c_get_clientdata(client);

    if (pn544_dev->nfc_ven_enabled && gpio_get_value(pn544_dev->irq_gpio)) {
        pm_wakeup_event(&pn544_dev->client->dev, WAKEUP_SRC_TIMEOUT);
        return -1;
    }

    return 0;
}

static int pn544_resume(struct device *device)
{
    return 0;
}

static const struct dev_pm_ops nfc_pm_ops = {
    SET_SYSTEM_SLEEP_PM_OPS(pn544_suspend, pn544_resume)
};
//#endif /* VENDOR_EDIT */
static const struct i2c_device_id pn544_id[] = {
#if NEXUS5x
        { "pn548", 0 },
#else
        { "pn544", 0 },
#endif
        { }
};
#if DRAGON_NFC
static struct of_device_id pn544_i2c_dt_match[] = {
    {
#if NEXUS5x
        .compatible = "nxp,pn548",
#else
        .compatible = "nxp,pn544",
#endif
    },
    {}
};
#endif
static struct i2c_driver pn544_driver = {
        .id_table   = pn544_id,
        .probe      = pn544_probe,
        .remove     = pn544_remove,
        .driver     = {
                .owner = THIS_MODULE,
#if NEXUS5x
                .name  = "pn548",
#else
                .name  = "pn544",
#endif
#if DRAGON_NFC
                .of_match_table = pn544_i2c_dt_match,
#endif
                //#ifdef VENDOR_EDIT
                //wenjie.Liu@CN.NFC.Basic.CardEmulation.1790271, 2019/01/10,
                //Add for :when phone is in sleep,wakeup AP
                .pm = &nfc_pm_ops,
                //#endif /* VENDOR_EDIT */
        },
};
#if HWINFO
/******************************************************************************
 * Function         check_hw_info
 *
 * Description      This function is called during pn544_probe to retrieve
 *                  HW info.
 *                  Useful get HW information in case of previous FW download is
 *                  interrupted and core reset is not allowed.
 *                  This function checks if core reset  is allowed, if not
 *                  sets DWNLD_REQ(firm_gpio) , ven reset and sends firmware
 *                  get version command.
 *                  In response HW information will be received.
 *
 * Returns          None
 *
 ******************************************************************************/
static void check_hw_info() {
    char read_data[20];
    int ret, get_version_len = 8, retry_count = 0;
    static uint8_t cmd_reset_nci[] = {0x20, 0x00, 0x01, 0x00};
    char get_version_cmd[] =
    {0x00, 0x04, 0xF1, 0x00, 0x00, 0x00, 0x6E, 0xEF};

    pr_info("%s :Enter\n", __func__);

    /*
     * Ven Reset  before sending core Reset
     * This is to check core reset is allowed or not.
     * If not allowed then previous FW download is interrupted in between
     * */
    pr_info("%s :Ven Reset \n", __func__);
    gpio_set_value(pn544_dev->ven_gpio, 1);
    msleep(10);
    gpio_set_value(pn544_dev->ven_gpio, 0);
    msleep(10);
    gpio_set_value(pn544_dev->ven_gpio, 1);
    msleep(10);
    ret = i2c_master_send(pn544_dev->client, cmd_reset_nci, 4);

    if (ret == 4) {
        pr_info("%s : core reset write success\n", __func__);
    } else {

        /*
         * Core reset  failed.
         * set the DWNLD_REQ , do ven reset
         * send firmware download info command
         * */
        pr_err("%s : write failed\n", __func__);
        pr_info("%s power on with firmware\n", __func__);
        gpio_set_value(pn544_dev->ven_gpio, 1);
        msleep(10);
        if (pn544_dev->firm_gpio) {
            p61_update_access_state(pn544_dev, P61_STATE_DWNLD, true);
            gpio_set_value(pn544_dev->firm_gpio, 1);
        }
        msleep(10);
        gpio_set_value(pn544_dev->ven_gpio, 0);
        msleep(10);
        gpio_set_value(pn544_dev->ven_gpio, 1);
        msleep(10);
        ret = i2c_master_send(pn544_dev->client, get_version_cmd, get_version_len);
        if (ret != get_version_len) {
            ret = -EIO;
            pr_err("%s : write_failed \n", __func__);
        }
        else {
            pr_info("%s :data sent\n", __func__);
        }

        ret = 0;

        while (retry_count < 10) {

            /*
             * Wait for read interrupt
             * If spurious interrupt is received retry again
             * */
            pn544_dev->irq_enabled = true;
            enable_irq(pn544_dev->client->irq);
            //#ifndef VENDOR_EDIT
            //wenjie.Liu@CN.NFC.Basic.CardEmulation.1790271, 2019/01/10,
            //Remove for :when phone is in sleep,wakeup AP
            //enable_irq_wake(pn544_dev->client->irq);
            //endif VENDOR_EDIT
            ret = wait_event_interruptible(
                    pn544_dev->read_wq,
                    !pn544_dev->irq_enabled);

            pn544_disable_irq(pn544_dev);

            if (gpio_get_value(pn544_dev->irq_gpio))
                break;

            pr_warning("%s: spurious interrupt detected\n", __func__);
            retry_count ++;
        }

        if(ret) {
            return;
        }

        /*
         * Read response data and copy into hw_type_info
         * */
        ret = i2c_master_recv(pn544_dev->client, read_data, 14);

        if(ret) {
            memcpy(hw_info.data, read_data, ret);
            hw_info.len = ret;
            pr_info("%s :data received len  : %d\n", __func__,hw_info.len);
        }
        else {
            pr_err("%s :Read Failed\n", __func__);
        }
    }
}
#endif
/*
 * module load/unload record keeping
 */

static int __init pn544_dev_init(void)
{
    pr_err("Loading pn544 driver\n");
    return i2c_add_driver(&pn544_driver);
}
module_init(pn544_dev_init);

static void __exit pn544_dev_exit(void)
{
    pr_err("Unloading pn544 driver\n");
    i2c_del_driver(&pn544_driver);
}
module_exit(pn544_dev_exit);

MODULE_AUTHOR("Sylvain Fonteneau");
MODULE_DESCRIPTION("NFC PN544 driver");
MODULE_LICENSE("GPL");