| /* |
| * |
| * Intel Management Engine Interface (Intel MEI) Linux driver |
| * Copyright (c) 2003-2012, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/fs.h> |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/pci.h> |
| #include <linux/poll.h> |
| #include <linux/ioctl.h> |
| #include <linux/cdev.h> |
| #include <linux/sched.h> |
| #include <linux/uuid.h> |
| #include <linux/compat.h> |
| #include <linux/jiffies.h> |
| #include <linux/interrupt.h> |
| |
| #include <linux/pm_domain.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <linux/mei.h> |
| |
| #include "mei_dev.h" |
| #include "client.h" |
| #include "hw-me-regs.h" |
| #include "hw-me.h" |
| |
| /* mei_pci_tbl - PCI Device ID Table */ |
| static const struct pci_device_id mei_me_pci_tbl[] = { |
| {MEI_PCI_DEVICE(MEI_DEV_ID_82946GZ, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_82G35, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_82Q965, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_82G965, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_82GM965, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_82GME965, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82Q35, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82G33, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82Q33, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82X38, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_3200, MEI_ME_ICH_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_6, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_7, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_8, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_9, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_10, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_1, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_2, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_3, MEI_ME_ICH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_4, MEI_ME_ICH_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_1, MEI_ME_ICH10_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_2, MEI_ME_ICH10_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_3, MEI_ME_ICH10_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_4, MEI_ME_ICH10_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, MEI_ME_PCH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, MEI_ME_PCH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_CPT_1, MEI_ME_PCH_CPT_PBG_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_PBG_1, MEI_ME_PCH_CPT_PBG_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, MEI_ME_PCH8_SPS_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, MEI_ME_PCH8_SPS_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_LP, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_HR, MEI_ME_PCH8_SPS_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP_2, MEI_ME_PCH8_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_SPT, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, MEI_ME_PCH8_SPS_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, MEI_ME_PCH8_SPS_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_LBG, MEI_ME_PCH8_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, MEI_ME_PCH8_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_GLK, MEI_ME_PCH8_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)}, |
| |
| {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_4, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)}, |
| {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)}, |
| |
| /* required last entry */ |
| {0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, mei_me_pci_tbl); |
| |
| #ifdef CONFIG_PM |
| static inline void mei_me_set_pm_domain(struct mei_device *dev); |
| static inline void mei_me_unset_pm_domain(struct mei_device *dev); |
| #else |
| static inline void mei_me_set_pm_domain(struct mei_device *dev) {} |
| static inline void mei_me_unset_pm_domain(struct mei_device *dev) {} |
| #endif /* CONFIG_PM */ |
| |
| /** |
| * mei_me_quirk_probe - probe for devices that doesn't valid ME interface |
| * |
| * @pdev: PCI device structure |
| * @cfg: per generation config |
| * |
| * Return: true if ME Interface is valid, false otherwise |
| */ |
| static bool mei_me_quirk_probe(struct pci_dev *pdev, |
| const struct mei_cfg *cfg) |
| { |
| if (cfg->quirk_probe && cfg->quirk_probe(pdev)) { |
| dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * mei_me_probe - Device Initialization Routine |
| * |
| * @pdev: PCI device structure |
| * @ent: entry in kcs_pci_tbl |
| * |
| * Return: 0 on success, <0 on failure. |
| */ |
| static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| const struct mei_cfg *cfg; |
| struct mei_device *dev; |
| struct mei_me_hw *hw; |
| unsigned int irqflags; |
| int err; |
| |
| cfg = mei_me_get_cfg(ent->driver_data); |
| if (!cfg) |
| return -ENODEV; |
| |
| if (!mei_me_quirk_probe(pdev, cfg)) |
| return -ENODEV; |
| |
| /* enable pci dev */ |
| err = pcim_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to enable pci device.\n"); |
| goto end; |
| } |
| /* set PCI host mastering */ |
| pci_set_master(pdev); |
| /* pci request regions and mapping IO device memory for mei driver */ |
| err = pcim_iomap_regions(pdev, BIT(0), KBUILD_MODNAME); |
| if (err) { |
| dev_err(&pdev->dev, "failed to get pci regions.\n"); |
| goto end; |
| } |
| |
| if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) || |
| dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { |
| |
| err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| err = dma_set_coherent_mask(&pdev->dev, |
| DMA_BIT_MASK(32)); |
| } |
| if (err) { |
| dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); |
| goto end; |
| } |
| |
| /* allocates and initializes the mei dev structure */ |
| dev = mei_me_dev_init(pdev, cfg); |
| if (!dev) { |
| err = -ENOMEM; |
| goto end; |
| } |
| hw = to_me_hw(dev); |
| hw->mem_addr = pcim_iomap_table(pdev)[0]; |
| |
| pci_enable_msi(pdev); |
| |
| /* request and enable interrupt */ |
| irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED; |
| |
| err = request_threaded_irq(pdev->irq, |
| mei_me_irq_quick_handler, |
| mei_me_irq_thread_handler, |
| irqflags, KBUILD_MODNAME, dev); |
| if (err) { |
| dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n", |
| pdev->irq); |
| goto end; |
| } |
| |
| if (mei_start(dev)) { |
| dev_err(&pdev->dev, "init hw failure.\n"); |
| err = -ENODEV; |
| goto release_irq; |
| } |
| |
| pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_ME_RPM_TIMEOUT); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| |
| err = mei_register(dev, &pdev->dev); |
| if (err) |
| goto stop; |
| |
| pci_set_drvdata(pdev, dev); |
| |
| /* |
| * MEI requires to resume from runtime suspend mode |
| * in order to perform link reset flow upon system suspend. |
| */ |
| pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME; |
| |
| /* |
| * ME maps runtime suspend/resume to D0i states, |
| * hence we need to go around native PCI runtime service which |
| * eventually brings the device into D3cold/hot state, |
| * but the mei device cannot wake up from D3 unlike from D0i3. |
| * To get around the PCI device native runtime pm, |
| * ME uses runtime pm domain handlers which take precedence |
| * over the driver's pm handlers. |
| */ |
| mei_me_set_pm_domain(dev); |
| |
| if (mei_pg_is_enabled(dev)) { |
| pm_runtime_put_noidle(&pdev->dev); |
| if (hw->d0i3_supported) |
| pm_runtime_allow(&pdev->dev); |
| } |
| |
| dev_dbg(&pdev->dev, "initialization successful.\n"); |
| |
| return 0; |
| |
| stop: |
| mei_stop(dev); |
| release_irq: |
| mei_cancel_work(dev); |
| mei_disable_interrupts(dev); |
| free_irq(pdev->irq, dev); |
| end: |
| dev_err(&pdev->dev, "initialization failed.\n"); |
| return err; |
| } |
| |
| /** |
| * mei_me_shutdown - Device Removal Routine |
| * |
| * @pdev: PCI device structure |
| * |
| * mei_me_shutdown is called from the reboot notifier |
| * it's a simplified version of remove so we go down |
| * faster. |
| */ |
| static void mei_me_shutdown(struct pci_dev *pdev) |
| { |
| struct mei_device *dev; |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return; |
| |
| dev_dbg(&pdev->dev, "shutdown\n"); |
| mei_stop(dev); |
| |
| mei_me_unset_pm_domain(dev); |
| |
| mei_disable_interrupts(dev); |
| free_irq(pdev->irq, dev); |
| } |
| |
| /** |
| * mei_me_remove - Device Removal Routine |
| * |
| * @pdev: PCI device structure |
| * |
| * mei_me_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. |
| */ |
| static void mei_me_remove(struct pci_dev *pdev) |
| { |
| struct mei_device *dev; |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return; |
| |
| if (mei_pg_is_enabled(dev)) |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| dev_dbg(&pdev->dev, "stop\n"); |
| mei_stop(dev); |
| |
| mei_me_unset_pm_domain(dev); |
| |
| mei_disable_interrupts(dev); |
| |
| free_irq(pdev->irq, dev); |
| |
| mei_deregister(dev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int mei_me_pci_suspend(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev = pci_get_drvdata(pdev); |
| |
| if (!dev) |
| return -ENODEV; |
| |
| dev_dbg(&pdev->dev, "suspend\n"); |
| |
| mei_stop(dev); |
| |
| mei_disable_interrupts(dev); |
| |
| free_irq(pdev->irq, dev); |
| pci_disable_msi(pdev); |
| |
| return 0; |
| } |
| |
| static int mei_me_pci_resume(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| unsigned int irqflags; |
| int err; |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| |
| pci_enable_msi(pdev); |
| |
| irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED; |
| |
| /* request and enable interrupt */ |
| err = request_threaded_irq(pdev->irq, |
| mei_me_irq_quick_handler, |
| mei_me_irq_thread_handler, |
| irqflags, KBUILD_MODNAME, dev); |
| |
| if (err) { |
| dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", |
| pdev->irq); |
| return err; |
| } |
| |
| err = mei_restart(dev); |
| if (err) |
| return err; |
| |
| /* Start timer if stopped in suspend */ |
| schedule_delayed_work(&dev->timer_work, HZ); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_PM |
| static int mei_me_pm_runtime_idle(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| |
| dev_dbg(&pdev->dev, "rpm: me: runtime_idle\n"); |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| if (mei_write_is_idle(dev)) |
| pm_runtime_autosuspend(device); |
| |
| return -EBUSY; |
| } |
| |
| static int mei_me_pm_runtime_suspend(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "rpm: me: runtime suspend\n"); |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| |
| mutex_lock(&dev->device_lock); |
| |
| if (mei_write_is_idle(dev)) |
| ret = mei_me_pg_enter_sync(dev); |
| else |
| ret = -EAGAIN; |
| |
| mutex_unlock(&dev->device_lock); |
| |
| dev_dbg(&pdev->dev, "rpm: me: runtime suspend ret=%d\n", ret); |
| |
| if (ret && ret != -EAGAIN) |
| schedule_work(&dev->reset_work); |
| |
| return ret; |
| } |
| |
| static int mei_me_pm_runtime_resume(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "rpm: me: runtime resume\n"); |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| |
| mutex_lock(&dev->device_lock); |
| |
| ret = mei_me_pg_exit_sync(dev); |
| |
| mutex_unlock(&dev->device_lock); |
| |
| dev_dbg(&pdev->dev, "rpm: me: runtime resume ret = %d\n", ret); |
| |
| if (ret) |
| schedule_work(&dev->reset_work); |
| |
| return ret; |
| } |
| |
| /** |
| * mei_me_set_pm_domain - fill and set pm domain structure for device |
| * |
| * @dev: mei_device |
| */ |
| static inline void mei_me_set_pm_domain(struct mei_device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev->dev); |
| |
| if (pdev->dev.bus && pdev->dev.bus->pm) { |
| dev->pg_domain.ops = *pdev->dev.bus->pm; |
| |
| dev->pg_domain.ops.runtime_suspend = mei_me_pm_runtime_suspend; |
| dev->pg_domain.ops.runtime_resume = mei_me_pm_runtime_resume; |
| dev->pg_domain.ops.runtime_idle = mei_me_pm_runtime_idle; |
| |
| dev_pm_domain_set(&pdev->dev, &dev->pg_domain); |
| } |
| } |
| |
| /** |
| * mei_me_unset_pm_domain - clean pm domain structure for device |
| * |
| * @dev: mei_device |
| */ |
| static inline void mei_me_unset_pm_domain(struct mei_device *dev) |
| { |
| /* stop using pm callbacks if any */ |
| dev_pm_domain_set(dev->dev, NULL); |
| } |
| |
| static const struct dev_pm_ops mei_me_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(mei_me_pci_suspend, |
| mei_me_pci_resume) |
| SET_RUNTIME_PM_OPS( |
| mei_me_pm_runtime_suspend, |
| mei_me_pm_runtime_resume, |
| mei_me_pm_runtime_idle) |
| }; |
| |
| #define MEI_ME_PM_OPS (&mei_me_pm_ops) |
| #else |
| #define MEI_ME_PM_OPS NULL |
| #endif /* CONFIG_PM */ |
| /* |
| * PCI driver structure |
| */ |
| static struct pci_driver mei_me_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = mei_me_pci_tbl, |
| .probe = mei_me_probe, |
| .remove = mei_me_remove, |
| .shutdown = mei_me_shutdown, |
| .driver.pm = MEI_ME_PM_OPS, |
| .driver.probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }; |
| |
| module_pci_driver(mei_me_driver); |
| |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_DESCRIPTION("Intel(R) Management Engine Interface"); |
| MODULE_LICENSE("GPL v2"); |