mac80211: adding 802.11n configuration flows
This patch configures the 802.11n mode of operation
internally in ieee80211_conf structure and in the low-level
driver as well (through op conf_ht).
It does not include AP configuration flows.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 1d553d7..87830c0 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -1437,6 +1437,19 @@
}
sta->supp_rates = rates;
+ if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
+ local->ops->conf_ht) {
+ struct ieee80211_ht_bss_info bss_info;
+
+ ieee80211_ht_cap_ie_to_ht_info(
+ (struct ieee80211_ht_cap *)
+ elems.ht_cap_elem, &sta->ht_info);
+ ieee80211_ht_addt_info_ie_to_ht_bss_info(
+ (struct ieee80211_ht_addt_info *)
+ elems.ht_info_elem, &bss_info);
+ ieee80211_hw_config_ht(local, 1, &sta->ht_info, &bss_info);
+ }
+
rate_control_rate_init(sta, local);
if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
@@ -1859,6 +1872,8 @@
struct ieee80211_if_sta *ifsta;
size_t baselen;
struct ieee802_11_elems elems;
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf = &local->hw.conf;
ieee80211_rx_bss_info(dev, mgmt, len, rx_status, 1);
@@ -1881,6 +1896,23 @@
if (elems.erp_info && elems.erp_info_len >= 1)
ieee80211_handle_erp_ie(dev, elems.erp_info[0]);
+ if (elems.ht_cap_elem && elems.ht_info_elem &&
+ elems.wmm_param && local->ops->conf_ht &&
+ conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+ struct ieee80211_ht_bss_info bss_info;
+
+ ieee80211_ht_addt_info_ie_to_ht_bss_info(
+ (struct ieee80211_ht_addt_info *)
+ elems.ht_info_elem, &bss_info);
+ /* check if AP changed bss inforamation */
+ if ((conf->ht_bss_conf.primary_channel !=
+ bss_info.primary_channel) ||
+ (conf->ht_bss_conf.bss_cap != bss_info.bss_cap) ||
+ (conf->ht_bss_conf.bss_op_mode != bss_info.bss_op_mode))
+ ieee80211_hw_config_ht(local, 1, &conf->ht_conf,
+ &bss_info);
+ }
+
if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
elems.wmm_param_len);