V4L/DVB (7471): SkyStar2: preparing support for the rev2.8
Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index ffcbc76..8193d88 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -10,6 +10,8 @@
select DVB_BCM3510 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select DVB_ISL6421 if !DVB_FE_CUSTOMISE
+ select DVB_CX24123 if !DVB_FE_CUSTOMISE
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 46d6f5d..6759c3a 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -19,6 +19,11 @@
#include "dvb-pll.h"
#include "tuner-simple.h"
+#include "cx24123.h"
+#include "cx24113.h"
+
+#include "isl6421.h"
+
/* lnb control */
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
@@ -476,11 +481,54 @@
// .pll_set = alps_tdee4_stv0297_pll_set,
};
+
+static struct cx24123_config skystar2_rev2_8_cx24123_config = {
+ .demod_address = 0x55,
+ .dont_use_pll = 1,
+ .agc_callback = cx24113_agc_callback,
+};
+
+static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
+ .i2c_addr = 0x54,
+ .xtal_khz = 10111,
+};
+
/* try to figure out the frontend, each card/box can have on of the following list */
int flexcop_frontend_init(struct flexcop_device *fc)
{
struct dvb_frontend_ops *ops;
struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
+ struct i2c_adapter *i2c_tuner;
+
+ /* try the sky v2.8 (cx24123, isl6421) */
+ fc->fe = dvb_attach(cx24123_attach,
+ &skystar2_rev2_8_cx24123_config, i2c);
+ if (fc->fe != NULL) {
+ i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
+ if (i2c_tuner != NULL) {
+ if (dvb_attach(cx24113_attach, fc->fe,
+ &skystar2_rev2_8_cx24113_config,
+ i2c_tuner) == NULL)
+ err("CX24113 could NOT be attached");
+ else
+ info("CX24113 successfully attached");
+ }
+
+ fc->dev_type = FC_SKY_REV28;
+
+ fc->fc_i2c_adap[2].no_base_addr = 1;
+ if (dvb_attach(isl6421_attach, fc->fe,
+ &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
+ err("ISL6421 could NOT be attached");
+ else
+ info("ISL6421 successfully attached");
+
+ /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
+ * IR-receiver (PIC16F818) - but the card has no input for
+ * that ??? */
+
+ goto fe_found;
+ }
/* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c
index 167583b..93d20e5 100644
--- a/drivers/media/dvb/b2c2/flexcop-misc.c
+++ b/drivers/media/dvb/b2c2/flexcop-misc.c
@@ -52,6 +52,8 @@
"Sky2PC/SkyStar 2 DVB-S (old version)",
"Cable2PC/CableStar 2 DVB-C",
"Air2PC/AirStar 2 ATSC 3rd generation (HD5000)",
+ "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
+ "Sky2PC/SkyStar 2 DVB-S rev 2.8",
};
static const char *flexcop_bus_names[] = {
diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h
index 491f9bd..7599fcc 100644
--- a/drivers/media/dvb/b2c2/flexcop-reg.h
+++ b/drivers/media/dvb/b2c2/flexcop-reg.h
@@ -25,6 +25,8 @@
FC_SKY_OLD,
FC_CABLE,
FC_AIR_ATSC3,
+ FC_SKY_REV27,
+ FC_SKY_REV28,
} flexcop_device_type_t;
typedef enum {
diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb/frontends/cx24113.h
new file mode 100644
index 0000000..5ab3dd1
--- /dev/null
+++ b/drivers/media/dvb/frontends/cx24113.h
@@ -0,0 +1,48 @@
+/*
+ * Driver for Conexant CX24113/CX24128 Tuner (Satelite)
+ *
+ * Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef CX24113_H
+#define CX24113_H
+
+struct dvb_frontend;
+
+struct cx24113_config {
+ u8 i2c_addr; /* 0x14 or 0x54 */
+
+ u32 xtal_khz;
+};
+
+/* TODO: #if defined(CONFIG_DVB_TUNER_CX24113) || \
+ * (defined(CONFIG_DVB_TUNER_CX24113_MODULE) && defined(MODULE)) */
+
+static inline struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
+ const struct cx24113_config *config, struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+
+static inline void cx24113_agc_callback(struct dvb_frontend *fe)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+}
+
+#endif /* CX24113_H */