diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment
index d145ccc..c7c7a11 100644
--- a/Documentation/arm/mem_alignment
+++ b/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 9b22bd1..eac7df9 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 077e903..fafcd47 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 2917ce4..2704819 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond
diff --git a/MAINTAINERS b/MAINTAINERS
index 24741de..09ed704 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1527,10 +1527,10 @@
 S:	Maintained
 
 ECRYPT FILE SYSTEM
-P:	Mike Halcrow, Phillip Hellewell
-M:	mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L:	ecryptfs-devel@lists.sourceforge.net
-W:	http://ecryptfs.sourceforge.net/
+P:	Tyler Hicks, Dustin Kirkland
+M:	tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L:	ecryptfs-devel@lists.launchpad.net
+W:	https://launchpad.net/ecryptfs
 S:	Supported
 
 EDAC-CORE
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 47ccec9..ef12794 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -630,7 +630,7 @@
 		return -ENOMEM;
 
 	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (!sachip->clk) {
+	if (IS_ERR(sachip->clk)) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
 	}
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index c74f766..23af3c9 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -115,6 +115,8 @@
 EXPORT_SYMBOL(__strncpy_from_user);
 
 #ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);
 EXPORT_SYMBOL(__clear_user);
@@ -181,8 +183,6 @@
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
-EXPORT_SYMBOL(copy_page);
-
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57e6874..79abc4d 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -18,6 +18,7 @@
 #include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 7b8842c..31e6a7b 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -12,9 +12,8 @@
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
  */
 extern int init_gpio_reset(int gpio, int output);
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 2df8d9f..22c9530 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
index f92306b..8d513a8 100644
--- a/arch/ia64/hp/sim/Kconfig
+++ b/arch/ia64/hp/sim/Kconfig
@@ -4,6 +4,7 @@
 
 config HP_SIMETH
 	bool "Simulated Ethernet "
+	depends on NET
 
 config HP_SIMSERIAL
 	bool "Simulated serial driver support"
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index d108715..5c33bc1 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -486,13 +486,13 @@
 	tlbsx	0,r3
 	mfspr	r4,SPRN_MAS1		/* check valid */
 	andis.	r3,r4,MAS1_VALID@h
-	beqlr
+	beq	1f
 	rlwinm	r4,r4,0,1,31
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 	msync
 	isync
-	wrtee	r10
+1:	wrtee	r10
 	blr
 #endif /* CONFIG_FSL_BOOKE */
 
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 29b2941..45907c1 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -556,6 +556,7 @@
 		be = blk->start + blk->size;
 		if (s >= bs && e <= be)
 			break;
+		blk = NULL;
 	}
 
 	if (blk == NULL)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 80119b3..5c9cbfc 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -55,6 +55,8 @@
 
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	def_bool y
+	depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
+				!SH_7751_SYSTEMH && !HD64461)
 
 config GENERIC_IRQ_PROBE
 	def_bool y
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index 25f531d..40e60fc 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -824,32 +824,36 @@
 			toshiba_acpi_exit();
 			return -ENOMEM;
 		}
-	}
 
-	/* Register input device for kill switch */
-	toshiba_acpi.poll_dev = input_allocate_polled_device();
-	if (!toshiba_acpi.poll_dev) {
-		printk(MY_ERR "unable to allocate kill-switch input device\n");
-		toshiba_acpi_exit();
-		return -ENOMEM;
-	}
-	toshiba_acpi.poll_dev->private = &toshiba_acpi;
-	toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
-	toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+		/* Register input device for kill switch */
+		toshiba_acpi.poll_dev = input_allocate_polled_device();
+		if (!toshiba_acpi.poll_dev) {
+			printk(MY_ERR
+			       "unable to allocate kill-switch input device\n");
+			toshiba_acpi_exit();
+			return -ENOMEM;
+		}
+		toshiba_acpi.poll_dev->private = &toshiba_acpi;
+		toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+		toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
 
-	toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
-	toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
-	toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
-	set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
-	set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
-	input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
-	input_sync(toshiba_acpi.poll_dev->input);
+		toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+		toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+		/* Toshiba USB ID */
+		toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+		set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+		set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+		input_report_switch(toshiba_acpi.poll_dev->input,
+				    SW_RFKILL_ALL, TRUE);
+		input_sync(toshiba_acpi.poll_dev->input);
 
-	ret = input_register_polled_device(toshiba_acpi.poll_dev);
-	if (ret) {
-		printk(MY_ERR "unable to register kill-switch input device\n");
-		toshiba_acpi_exit();
-		return ret;
+		ret = input_register_polled_device(toshiba_acpi.poll_dev);
+		if (ret) {
+			printk(MY_ERR
+			       "unable to register kill-switch input device\n");
+			toshiba_acpi_exit();
+			return ret;
+		}
 	}
 
 	return 0;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5e2eb74..bc6695e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4050,17 +4050,70 @@
 	{ "ST3160023AS",	"3.42",		ATA_HORKAGE_NONCQ },
 
 	/* Seagate NCQ + FLUSH CACHE firmware bug */
-	{ "ST31500341AS",	"9JU138",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD15",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"9FZ136",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD16",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"9FZ164",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD17",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"9FZ134",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD18",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"9FZ182",	ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD19",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"9FZ162",	ATA_HORKAGE_NONCQ |
+
+	{ "ST31000333AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST31000333AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640623AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640623AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3640323AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3640323AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320813AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320813AS",	"SD19",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+
+	{ "ST3320613AS",	"SD15",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD16",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD17",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD18",		ATA_HORKAGE_NONCQ |
+						ATA_HORKAGE_FIRMWARE_WARN },
+	{ "ST3320613AS",	"SD19",		ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a098ba8..e0c4f05 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -183,7 +183,9 @@
 			mask &= ~(0xF8 << ATA_SHIFT_UDMA);
 		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
 			mask &= ~(0xF0 << ATA_SHIFT_UDMA);
-	}
+	} else if (adev->class == ATA_DEV_ATAPI)
+		mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
 	return ata_bmdma_mode_filter(adev, mask);
 }
 
@@ -211,11 +213,15 @@
 
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
-	u8 ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
 
+	/*
+	 * Each channel of pata_hpt366 occupies separate PCI function
+	 * as the primary channel and bit1 indicates the cable type.
+	 */
 	pci_read_config_byte(pdev, 0x5A, &ata66);
-	if (ata66 & (1 << ap->port_no))
+	if (ata66 & 2)
 		return ATA_CBL_PATA40;
 	return ATA_CBL_PATA80;
 }
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
index aa7f796..05d8977 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.c
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index 8b0252b..d4f419e 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
index 776b505..02225eb 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.c
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index 62bda45..4c9dd9a 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2007-2008 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d161319..f40ab69 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
  *     (c) Copyright 2007-2008 Xilinx Inc.
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 24d0d9b..8cca119 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -21,9 +21,6 @@
  *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  *     FOR A PARTICULAR PURPOSE.
  *
- *     Xilinx products are not intended for use in life support appliances,
- *     devices, or systems. Use in such applications is expressly prohibited.
- *
  *     (c) Copyright 2003-2007 Xilinx Inc.
  *     All rights reserved.
  *
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 228f757..3fcf78e 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -365,6 +365,7 @@
 		pmsg = &msgs[tptr];
 		if (pmsg->flags & I2C_M_RD)
 			ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+				(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
 				!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
 				1 * HZ);
 		else
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 1fac4e2..b7434d2 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -56,6 +56,7 @@
 struct s3c24xx_i2c {
 	spinlock_t		lock;
 	wait_queue_head_t	wait;
+	unsigned int		suspended:1;
 
 	struct i2c_msg		*msg;
 	unsigned int		msg_num;
@@ -507,7 +508,7 @@
 	unsigned long timeout;
 	int ret;
 
-	if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+	if (i2c->suspended)
 		return -EIO;
 
 	ret = s3c24xx_i2c_set_master(i2c);
@@ -986,17 +987,26 @@
 }
 
 #ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+				    pm_message_t msg)
+{
+	struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+	i2c->suspended = 1;
+	return 0;
+}
+
 static int s3c24xx_i2c_resume(struct platform_device *dev)
 {
 	struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
 
-	if (i2c != NULL)
-		s3c24xx_i2c_init(i2c);
+	i2c->suspended = 0;
+	s3c24xx_i2c_init(i2c);
 
 	return 0;
 }
 
 #else
+#define s3c24xx_i2c_suspend_late NULL
 #define s3c24xx_i2c_resume NULL
 #endif
 
@@ -1005,6 +1015,7 @@
 static struct platform_driver s3c2410_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
+	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
@@ -1015,6 +1026,7 @@
 static struct platform_driver s3c2440_i2c_driver = {
 	.probe		= s3c24xx_i2c_probe,
 	.remove		= s3c24xx_i2c_remove,
+	.suspend_late	= s3c24xx_i2c_suspend_late,
 	.resume		= s3c24xx_i2c_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index d333ae2..79ef5fd 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -115,8 +115,14 @@
 	return error;
 }
 
+#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
+
 static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
 {
+	/* Freecom FireWire Hard Drive firmware bug */
+	if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
+		return 0;
+
 	return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
 }
 
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 523b971..d115a6d3 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1893,12 +1893,17 @@
 		ctrl |= E1000_CTRL_PHY_RST;
 	}
 	ret_val = e1000_acquire_swflag_ich8lan(hw);
+	/* Whether or not the swflag was acquired, we need to reset the part */
 	hw_dbg(hw, "Issuing a global reset to ich8lan");
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
-	/* release the swflag because it is not reset by hardware reset */
-	e1000_release_swflag_ich8lan(hw);
+	if (!ret_val) {
+		/* release the swflag because it is not reset by
+		 * hardware reset
+		 */
+		e1000_release_swflag_ich8lan(hw);
+	}
 
 	ret_val = e1000e_get_auto_rd_done(hw);
 	if (ret_val) {
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 1349e41..fed7eba 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1142,6 +1142,70 @@
 	return NETDEV_TX_OK;
 }
 
+static void gem_pcs_reset(struct gem *gp)
+{
+	int limit;
+	u32 val;
+
+	/* Reset PCS unit. */
+	val = readl(gp->regs + PCS_MIICTRL);
+	val |= PCS_MIICTRL_RST;
+	writel(val, gp->regs + PCS_MIICTRL);
+
+	limit = 32;
+	while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+		udelay(100);
+		if (limit-- <= 0)
+			break;
+	}
+	if (limit <= 0)
+		printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+		       gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+	u32 val;
+
+	/* Make sure PCS is disabled while changing advertisement
+	 * configuration.
+	 */
+	val = readl(gp->regs + PCS_CFG);
+	val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+	writel(val, gp->regs + PCS_CFG);
+
+	/* Advertise all capabilities except assymetric
+	 * pause.
+	 */
+	val = readl(gp->regs + PCS_MIIADV);
+	val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+		PCS_MIIADV_SP | PCS_MIIADV_AP);
+	writel(val, gp->regs + PCS_MIIADV);
+
+	/* Enable and restart auto-negotiation, disable wrapback/loopback,
+	 * and re-enable PCS.
+	 */
+	val = readl(gp->regs + PCS_MIICTRL);
+	val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+	val &= ~PCS_MIICTRL_WB;
+	writel(val, gp->regs + PCS_MIICTRL);
+
+	val = readl(gp->regs + PCS_CFG);
+	val |= PCS_CFG_ENABLE;
+	writel(val, gp->regs + PCS_CFG);
+
+	/* Make sure serialink loopback is off.  The meaning
+	 * of this bit is logically inverted based upon whether
+	 * you are in Serialink or SERDES mode.
+	 */
+	val = readl(gp->regs + PCS_SCTRL);
+	if (gp->phy_type == phy_serialink)
+		val &= ~PCS_SCTRL_LOOP;
+	else
+		val |= PCS_SCTRL_LOOP;
+	writel(val, gp->regs + PCS_SCTRL);
+}
+
 #define STOP_TRIES 32
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1168,6 +1232,9 @@
 
 	if (limit <= 0)
 		printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+	if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+		gem_pcs_reinit_adv(gp);
 }
 
 /* Must be invoked under gp->lock and gp->tx_lock. */
@@ -1324,7 +1391,7 @@
 	    	   gp->phy_type == phy_serdes) {
 		u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
 
-		if (pcs_lpa & PCS_MIIADV_FD)
+		if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
 			full_duplex = 1;
 		speed = SPEED_1000;
 	}
@@ -1488,6 +1555,9 @@
 			val = readl(gp->regs + PCS_MIISTAT);
 
 		if ((val & PCS_MIISTAT_LS) != 0) {
+			if (gp->lstate == link_up)
+				goto restart;
+
 			gp->lstate = link_up;
 			netif_carrier_on(gp->dev);
 			(void)gem_set_link_modes(gp);
@@ -1708,61 +1778,8 @@
 		if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
 			gp->phy_mii.def->ops->init(&gp->phy_mii);
 	} else {
-		u32 val;
-		int limit;
-
-		/* Reset PCS unit. */
-		val = readl(gp->regs + PCS_MIICTRL);
-		val |= PCS_MIICTRL_RST;
-		writel(val, gp->regs + PCS_MIICTRL);
-
-		limit = 32;
-		while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
-			udelay(100);
-			if (limit-- <= 0)
-				break;
-		}
-		if (limit <= 0)
-			printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
-			       gp->dev->name);
-
-		/* Make sure PCS is disabled while changing advertisement
-		 * configuration.
-		 */
-		val = readl(gp->regs + PCS_CFG);
-		val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
-		writel(val, gp->regs + PCS_CFG);
-
-		/* Advertise all capabilities except assymetric
-		 * pause.
-		 */
-		val = readl(gp->regs + PCS_MIIADV);
-		val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
-			PCS_MIIADV_SP | PCS_MIIADV_AP);
-		writel(val, gp->regs + PCS_MIIADV);
-
-		/* Enable and restart auto-negotiation, disable wrapback/loopback,
-		 * and re-enable PCS.
-		 */
-		val = readl(gp->regs + PCS_MIICTRL);
-		val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
-		val &= ~PCS_MIICTRL_WB;
-		writel(val, gp->regs + PCS_MIICTRL);
-
-		val = readl(gp->regs + PCS_CFG);
-		val |= PCS_CFG_ENABLE;
-		writel(val, gp->regs + PCS_CFG);
-
-		/* Make sure serialink loopback is off.  The meaning
-		 * of this bit is logically inverted based upon whether
-		 * you are in Serialink or SERDES mode.
-		 */
-		val = readl(gp->regs + PCS_SCTRL);
-		if (gp->phy_type == phy_serialink)
-			val &= ~PCS_SCTRL_LOOP;
-		else
-			val |= PCS_SCTRL_LOOP;
-		writel(val, gp->regs + PCS_SCTRL);
+		gem_pcs_reset(gp);
+		gem_pcs_reinit_adv(gp);
 	}
 
 	/* Default aneg parameters */
@@ -2680,6 +2697,21 @@
 		cmd->speed = 0;
 		cmd->duplex = cmd->port = cmd->phy_address =
 			cmd->transceiver = cmd->autoneg = 0;
+
+		/* serdes means usually a Fibre connector, with most fixed */
+		if (gp->phy_type == phy_serdes) {
+			cmd->port = PORT_FIBRE;
+			cmd->supported = (SUPPORTED_1000baseT_Half |
+				SUPPORTED_1000baseT_Full |
+				SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+				SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+			cmd->advertising = cmd->supported;
+			cmd->transceiver = XCVR_INTERNAL;
+			if (gp->lstate == link_up)
+				cmd->speed = SPEED_1000;
+			cmd->duplex = DUPLEX_FULL;
+			cmd->autoneg = 1;
+		}
 	}
 	cmd->maxtxpkt = cmd->maxrxpkt = 0;
 
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index bb733886..b59d411 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -334,6 +334,6 @@
 module_init(bfin_cf_init);
 module_exit(bfin_cf_exit);
 
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index d1812d3..63f0de2 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -827,7 +827,7 @@
 
 	maple_queue_cache =
 	    kmem_cache_create("maple_queue_cache", 0x400, 0,
-			      SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL);
+			      SLAB_HWCACHE_ALIGN, NULL);
 
 	if (!maple_queue_cache)
 		goto cleanup_bothirqs;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index c95b286..5d457c9 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -22,6 +22,8 @@
 	  If in doubt, say N here.
 
 
+if STAGING
+
 config STAGING_EXCLUDE_BUILD
 	bool "Exclude Staging drivers from being built" if STAGING
 	default y
@@ -62,3 +64,4 @@
 source "drivers/staging/poch/Kconfig"
 
 endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 8e74657..43a863c 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -51,6 +51,7 @@
 	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
 	{ 0, } /* terminating entry */
 };
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 
 /*
  * This structure is the capabilities for the device
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3d7793d..8c08130 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -279,7 +279,9 @@
 	 * altsetting means creating new endpoint device entries).
 	 * When either of these happens, defer the Set-Interface.
 	 */
-	if (!error && intf->dev.power.status == DPM_ON)
+	if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+		;	/* Already in altsetting 0 so skip Set-Interface */
+	else if (!error && intf->dev.power.status == DPM_ON)
 		usb_set_interface(udev, intf->altsetting[0].
 				desc.bInterfaceNumber, 0);
 	else
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 428b599..3a8bb53 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -651,6 +651,8 @@
 				fs_in_desc.bEndpointAddress;
 		hs_out_desc.bEndpointAddress =
 				fs_out_desc.bEndpointAddress;
+		hs_notify_desc.bEndpointAddress =
+				fs_notify_desc.bEndpointAddress;
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@
 				f->hs_descriptors, &hs_in_desc);
 		rndis->hs.out = usb_find_endpoint(eth_hs_function,
 				f->hs_descriptors, &hs_out_desc);
+		rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+				f->hs_descriptors, &hs_notify_desc);
 	}
 
 	rndis->port.open = rndis_open;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aad1359..fb6f293 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992..373ee09 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
 
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 491c885..1aed584 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,8 @@
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a3bd039..54974f4 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -110,3 +110,11 @@
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID	0x05ad
 #define YCCABLE_PRODUCT_ID	0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID	0x5372
+#define SUPERIAL_PRODUCT_ID	0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID		0x03f0
+#define HP_LD220_PRODUCT_ID	0x3524
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 31c42d1..01d0c70 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,56 +16,6 @@
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- * 	exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- * 	exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*}		# delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- * 	s=$1
- * 	shift
- * 	for i
- * 	do
- * 		if [[ $s -eq $i ]]
- * 		then
- * 			return 0
- * 		fi
- * 	done
- * 	return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- * 	echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
  */
 
 #include <linux/kernel.h>
@@ -457,9 +407,10 @@
 		goto free_tdev;
 	}
 
-	/* the second configuration must be set (in sysfs by hotplug script) */
+	/* the second configuration must be set */
 	if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
-		status = -ENODEV;
+		status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+		status = status ? status : -ENODEV;
 		goto free_tdev;
 	}
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e61f2bf..bfcc1fe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,8 +167,22 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0060, 0x0551, 0x0551,
+		"Nokia",
+		"3500c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV(  0x0421, 0x0063, 0x0001, 0x0601,
+		"Nokia",
+		"Nokia 3109c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0701,
 		"Nokia",
 		"5310",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 2af8626..6d51696 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -3983,7 +3983,8 @@
 
 		node->flags = le16_to_cpu(pSMBr->DFSFlags);
 		if (is_unicode) {
-			__le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+			__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
+						GFP_KERNEL);
 			cifsConvertToUCS((__le16 *) tmp, searchName,
 					PATH_MAX, nls_codepage, remap);
 			node->path_consumed = hostlen_fromUCS(tmp,
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 5f180cf..5e0c0d0 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -86,7 +86,8 @@
 #define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask)			\
 	OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
 
-#define OCFS2_FEATURE_COMPAT_SUPP	OCFS2_FEATURE_COMPAT_BACKUP_SB
+#define OCFS2_FEATURE_COMPAT_SUPP	(OCFS2_FEATURE_COMPAT_BACKUP_SB	\
+					 | OCFS2_FEATURE_COMPAT_JBD2_SB)
 #define OCFS2_FEATURE_INCOMPAT_SUPP	(OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \
 					 | OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \
 					 | OCFS2_FEATURE_INCOMPAT_INLINE_DATA \
@@ -153,6 +154,11 @@
 #define OCFS2_FEATURE_COMPAT_BACKUP_SB		0x0001
 
 /*
+ * The filesystem will correctly handle journal feature bits.
+ */
+#define OCFS2_FEATURE_COMPAT_JBD2_SB		0x0002
+
+/*
  * Unwritten extents support.
  */
 #define OCFS2_FEATURE_RO_COMPAT_UNWRITTEN	0x0001
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 054e2ef..74d7367 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -2645,9 +2645,9 @@
 				return ret;
 			}
 
-			i = xs->here - old_xh->xh_entries;
-			xs->here = &xs->header->xh_entries[i];
 		}
+		i = xs->here - old_xh->xh_entries;
+		xs->here = &xs->header->xh_entries[i];
 	}
 
 	return ret;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 9d77b1d..e26f549 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -319,6 +319,7 @@
 {
 	NAPI_STATE_SCHED,	/* Poll is scheduled */
 	NAPI_STATE_DISABLE,	/* Disable pending */
+	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 };
 
 extern void __napi_schedule(struct napi_struct *n);
@@ -1497,6 +1498,12 @@
 {
 	unsigned long flags;
 
+	/*
+	 * don't let napi dequeue from the cpu poll list
+	 * just in case its running on a different cpu
+	 */
+	if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
+		return;
 	local_irq_save(flags);
 	__netif_rx_complete(dev, napi);
 	local_irq_restore(flags);
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 3f9a600..6e7ba16 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -146,6 +146,8 @@
 })
 #define smp_call_function_mask(mask, func, info, wait) \
 			(up_smp_call_function(func, info))
+#define smp_call_function_many(mask, func, info, wait) \
+			(up_smp_call_function(func, info))
 static inline void init_call_single_data(void)
 {
 }
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 73a2f4e..9b42bae 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -158,8 +158,12 @@
  * (rarely) accepted by SET_DESCRIPTOR.
  *
  * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire".  Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
  */
 
 /*
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fe00b3b..8185a0f 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -702,7 +702,7 @@
 	 * any child cgroups exist. This is theoretically supportable
 	 * but involves complex error handling, so it's being left until
 	 * later */
-	if (!list_empty(&cgrp->children))
+	if (root->number_of_cgroups > 1)
 		return -EBUSY;
 
 	/* Process each subsystem */
diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c
index d83660f..8e30295 100644
--- a/lib/dynamic_printk.c
+++ b/lib/dynamic_printk.c
@@ -135,7 +135,7 @@
 	nr_entries--;
 out:
 	up(&debug_list_mutex);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
 
@@ -289,7 +289,7 @@
 					dynamic_enabled = DYNAMIC_ENABLED_SOME;
 					err = 0;
 					printk(KERN_DEBUG
-					       "debugging enabled for module %s",
+					       "debugging enabled for module %s\n",
 					       elem->name);
 				} else if (!value && (elem->enable == 1)) {
 					elem->enable = 0;
@@ -309,7 +309,7 @@
 					err = 0;
 					printk(KERN_DEBUG
 					       "debugging disabled for module "
-					       "%s", elem->name);
+					       "%s\n", elem->name);
 				}
 			}
 		}
diff --git a/mm/migrate.c b/mm/migrate.c
index d8f0766..037b096 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -998,7 +998,7 @@
 		unsigned long addr = (unsigned long)(*pages);
 		struct vm_area_struct *vma;
 		struct page *page;
-		int err;
+		int err = -EFAULT;
 
 		vma = find_vma(mm, addr);
 		if (!vma)
diff --git a/mm/slob.c b/mm/slob.c
index cb675d1..bf7e8fc 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -535,7 +535,7 @@
 	struct kmem_cache *c;
 
 	c = slob_alloc(sizeof(struct kmem_cache),
-		flags, ARCH_KMALLOC_MINALIGN, -1);
+		GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
 
 	if (c) {
 		c->name = name;
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 6c7af39..dadac62 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -133,9 +133,11 @@
 
 	npinfo->rx_flags |= NETPOLL_RX_DROP;
 	atomic_inc(&trapped);
+	set_bit(NAPI_STATE_NPSVC, &napi->state);
 
 	work = napi->poll(napi, budget);
 
+	clear_bit(NAPI_STATE_NPSVC, &napi->state);
 	atomic_dec(&trapped);
 	npinfo->rx_flags &= ~NETPOLL_RX_DROP;
 
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index bea54a6..8d489e7 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -61,7 +61,7 @@
 static struct xt_table nat_table = {
 	.name		= "nat",
 	.valid_hooks	= NAT_VALID_HOOKS,
-	.lock		= __RW_LOCK_UNLOCKED(__nat_table.lock),
+	.lock		= __RW_LOCK_UNLOCKED(nat_table.lock),
 	.me		= THIS_MODULE,
 	.af		= AF_INET,
 };
diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c
index 7cd2226..a453aac 100644
--- a/net/ipv4/tcp_vegas.c
+++ b/net/ipv4/tcp_vegas.c
@@ -40,18 +40,14 @@
 
 #include "tcp_vegas.h"
 
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-static int alpha = 2<<V_PARAM_SHIFT;
-static int beta  = 4<<V_PARAM_SHIFT;
-static int gamma = 1<<V_PARAM_SHIFT;
+static int alpha = 2;
+static int beta  = 4;
+static int gamma = 1;
 
 module_param(alpha, int, 0644);
-MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(alpha, "lower bound of packets in network");
 module_param(beta, int, 0644);
-MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(beta, "upper bound of packets in network");
 module_param(gamma, int, 0644);
 MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)");
 
@@ -172,49 +168,13 @@
 		return;
 	}
 
-	/* The key players are v_beg_snd_una and v_beg_snd_nxt.
-	 *
-	 * These are so named because they represent the approximate values
-	 * of snd_una and snd_nxt at the beginning of the current RTT. More
-	 * precisely, they represent the amount of data sent during the RTT.
-	 * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
-	 * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
-	 * bytes of data have been ACKed during the course of the RTT, giving
-	 * an "actual" rate of:
-	 *
-	 *     (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
-	 *
-	 * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
-	 * because delayed ACKs can cover more than one segment, so they
-	 * don't line up nicely with the boundaries of RTTs.
-	 *
-	 * Another unfortunate fact of life is that delayed ACKs delay the
-	 * advance of the left edge of our send window, so that the number
-	 * of bytes we send in an RTT is often less than our cwnd will allow.
-	 * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
-	 */
-
 	if (after(ack, vegas->beg_snd_nxt)) {
 		/* Do the Vegas once-per-RTT cwnd adjustment. */
-		u32 old_wnd, old_snd_cwnd;
-
-
-		/* Here old_wnd is essentially the window of data that was
-		 * sent during the previous RTT, and has all
-		 * been acknowledged in the course of the RTT that ended
-		 * with the ACK we just received. Likewise, old_snd_cwnd
-		 * is the cwnd during the previous RTT.
-		 */
-		old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
-			tp->mss_cache;
-		old_snd_cwnd = vegas->beg_snd_cwnd;
 
 		/* Save the extent of the current window so we can use this
 		 * at the end of the next RTT.
 		 */
-		vegas->beg_snd_una  = vegas->beg_snd_nxt;
 		vegas->beg_snd_nxt  = tp->snd_nxt;
-		vegas->beg_snd_cwnd = tp->snd_cwnd;
 
 		/* We do the Vegas calculations only if we got enough RTT
 		 * samples that we can be reasonably sure that we got
@@ -252,22 +212,14 @@
 			 *
 			 * This is:
 			 *     (actual rate in segments) * baseRTT
-			 * We keep it as a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary point.
 			 */
-			target_cwnd = ((u64)old_wnd * vegas->baseRTT);
-			target_cwnd <<= V_PARAM_SHIFT;
-			do_div(target_cwnd, rtt);
+			target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt;
 
 			/* Calculate the difference between the window we had,
 			 * and the window we would like to have. This quantity
 			 * is the "Diff" from the Arizona Vegas papers.
-			 *
-			 * Again, this is a fixed point number with
-			 * V_PARAM_SHIFT bits to the right of the binary
-			 * point.
 			 */
-			diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
+			diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
 
 			if (diff > gamma && tp->snd_ssthresh > 2 ) {
 				/* Going too fast. Time to slow down
@@ -282,16 +234,13 @@
 				 * truncation robs us of full link
 				 * utilization.
 				 */
-				tp->snd_cwnd = min(tp->snd_cwnd,
-						   ((u32)target_cwnd >>
-						    V_PARAM_SHIFT)+1);
+				tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
 
 			} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
 				/* Slow start.  */
 				tcp_slow_start(tp);
 			} else {
 				/* Congestion avoidance. */
-				u32 next_snd_cwnd;
 
 				/* Figure out where we would like cwnd
 				 * to be.
@@ -300,26 +249,17 @@
 					/* The old window was too fast, so
 					 * we slow down.
 					 */
-					next_snd_cwnd = old_snd_cwnd - 1;
+					tp->snd_cwnd--;
 				} else if (diff < alpha) {
 					/* We don't have enough extra packets
 					 * in the network, so speed up.
 					 */
-					next_snd_cwnd = old_snd_cwnd + 1;
+					tp->snd_cwnd++;
 				} else {
 					/* Sending just as fast as we
 					 * should be.
 					 */
-					next_snd_cwnd = old_snd_cwnd;
 				}
-
-				/* Adjust cwnd upward or downward, toward the
-				 * desired value.
-				 */
-				if (next_snd_cwnd > tp->snd_cwnd)
-					tp->snd_cwnd++;
-				else if (next_snd_cwnd < tp->snd_cwnd)
-					tp->snd_cwnd--;
 			}
 
 			if (tp->snd_cwnd < 2)
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 1724383..d0f54d1 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -912,8 +912,13 @@
 		   is invalid, but ndisc specs say nothing
 		   about it. It could be misconfiguration, or
 		   an smart proxy agent tries to help us :-)
+
+		   We should not print the error if NA has been
+		   received from loopback - it is just our own
+		   unsolicited advertisement.
 		 */
-		ND_PRINTK1(KERN_WARNING
+		if (skb->pkt_type != PACKET_LOOPBACK)
+			ND_PRINTK1(KERN_WARNING
 			   "ICMPv6 NA: someone advertises our address on %s!\n",
 			   ifp->idev->dev->name);
 		in6_ifa_put(ifp);
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 90c8506..8c03080 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -562,7 +562,6 @@
 				      const struct in_addr *mask,
 				      struct netlbl_audit *audit_info)
 {
-	int ret_val = 0;
 	struct netlbl_af4list *list_entry;
 	struct netlbl_unlhsh_addr4 *entry;
 	struct audit_buffer *audit_buf;
@@ -577,7 +576,7 @@
 	if (list_entry != NULL)
 		entry = netlbl_unlhsh_addr4_entry(list_entry);
 	else
-		ret_val = -ENOENT;
+		entry = NULL;
 
 	audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
 					      audit_info);
@@ -588,19 +587,21 @@
 					  addr->s_addr, mask->s_addr);
 		if (dev != NULL)
 			dev_put(dev);
-		if (entry && security_secid_to_secctx(entry->secid,
-						      &secctx,
-						      &secctx_len) == 0) {
+		if (entry != NULL &&
+		    security_secid_to_secctx(entry->secid,
+					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
 		}
-		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
 	}
 
-	if (ret_val == 0)
-		call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
-	return ret_val;
+	if (entry == NULL)
+		return -ENOENT;
+
+	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+	return 0;
 }
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -624,7 +625,6 @@
 				      const struct in6_addr *mask,
 				      struct netlbl_audit *audit_info)
 {
-	int ret_val = 0;
 	struct netlbl_af6list *list_entry;
 	struct netlbl_unlhsh_addr6 *entry;
 	struct audit_buffer *audit_buf;
@@ -638,7 +638,7 @@
 	if (list_entry != NULL)
 		entry = netlbl_unlhsh_addr6_entry(list_entry);
 	else
-		ret_val = -ENOENT;
+		entry = NULL;
 
 	audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
 					      audit_info);
@@ -649,19 +649,21 @@
 					  addr, mask);
 		if (dev != NULL)
 			dev_put(dev);
-		if (entry && security_secid_to_secctx(entry->secid,
-						      &secctx,
-						      &secctx_len) == 0) {
+		if (entry != NULL &&
+		    security_secid_to_secctx(entry->secid,
+					     &secctx, &secctx_len) == 0) {
 			audit_log_format(audit_buf, " sec_obj=%s", secctx);
 			security_release_secctx(secctx, secctx_len);
 		}
-		audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+		audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
 		audit_log_end(audit_buf);
 	}
 
-	if (ret_val == 0)
-		call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
-	return ret_val;
+	if (entry == NULL)
+		return -ENOENT;
+
+	call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+	return 0;
 }
 #endif /* IPv6 */
 
diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c
index 9978afb..803eeef 100644
--- a/net/phonet/pep-gprs.c
+++ b/net/phonet/pep-gprs.c
@@ -155,12 +155,13 @@
 static void gprs_write_space(struct sock *sk)
 {
 	struct gprs_dev *dev = sk->sk_user_data;
+	struct net_device *net = dev->net;
 	unsigned credits = pep_writeable(sk);
 
 	spin_lock_bh(&dev->tx_lock);
 	dev->tx_max = credits;
-	if (credits > skb_queue_len(&dev->tx_queue))
-		netif_wake_queue(dev->net);
+	if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net))
+		netif_wake_queue(net);
 	spin_unlock_bh(&dev->tx_lock);
 }
 
@@ -168,6 +169,23 @@
  * Network device callbacks
  */
 
+static int gprs_open(struct net_device *dev)
+{
+	struct gprs_dev *gp = netdev_priv(dev);
+
+	gprs_write_space(gp->sk);
+	return 0;
+}
+
+static int gprs_close(struct net_device *dev)
+{
+	struct gprs_dev *gp = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	flush_work(&gp->tx_work);
+	return 0;
+}
+
 static int gprs_xmit(struct sk_buff *skb, struct net_device *net)
 {
 	struct gprs_dev *dev = netdev_priv(net);
@@ -254,6 +272,8 @@
 	net->tx_queue_len	= 10;
 
 	net->destructor		= free_netdev;
+	net->open		= gprs_open;
+	net->stop		= gprs_close;
 	net->hard_start_xmit	= gprs_xmit; /* mandatory */
 	net->change_mtu		= gprs_set_mtu;
 	net->get_stats		= gprs_get_stats;
@@ -318,7 +338,6 @@
 	dev->sk = sk;
 
 	printk(KERN_DEBUG"%s: attached\n", net->name);
-	gprs_write_space(sk); /* kick off TX */
 	return net->ifindex;
 
 out_rel:
@@ -341,7 +360,5 @@
 
 	printk(KERN_DEBUG"%s: detached\n", net->name);
 	unregister_netdev(net);
-	flush_scheduled_work();
 	sock_put(sk);
-	skb_queue_purge(&dev->tx_queue);
 }
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index a119599..98402f0 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -46,9 +46,6 @@
 	 layering other disciplines.  It does not need to do bandwidth
 	 control either since that can be handled by using token
 	 bucket or other rate control.
-
-	 The simulator is limited by the Linux timer resolution
-	 and will create packet bursts on the HZ boundary (1ms).
 */
 
 struct netem_sched_data {