V4L/DVB (6856): zl10353: improve tuning parameters and update register map

Some more I2C traces and a experimentation with register values on
both the ZL10353 and MT352 mean that I can now guess at what more
of the ZL10353 registers do.

Guess at the registers' names (based on the equivalent names in MT352)
and update set_parameters/get_parameters with the new knowledge.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
index e874ec8..276e3b6 100644
--- a/drivers/media/dvb/frontends/zl10353.c
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -36,6 +36,8 @@
 	struct dvb_frontend frontend;
 
 	struct zl10353_config config;
+
+	enum fe_bandwidth bandwidth;
 };
 
 static int debug;
@@ -195,27 +197,156 @@
 {
 	struct zl10353_state *state = fe->demodulator_priv;
 	u16 nominal_rate, input_freq;
-	u8 pllbuf[6] = { 0x67 };
+	u8 pllbuf[6] = { 0x67 }, acq_ctl = 0;
+	u16 tps = 0;
+	struct dvb_ofdm_parameters *op = &param->u.ofdm;
 
-	/* These settings set "auto-everything" and start the FSM. */
-	zl10353_single_write(fe, 0x55, 0x80);
+	zl10353_single_write(fe, RESET, 0x80);
 	udelay(200);
 	zl10353_single_write(fe, 0xEA, 0x01);
 	udelay(200);
 	zl10353_single_write(fe, 0xEA, 0x00);
 
-	zl10353_single_write(fe, 0x56, 0x28);
-	zl10353_single_write(fe, 0x89, 0x20);
-	zl10353_single_write(fe, 0x5E, 0x00);
+	zl10353_single_write(fe, AGC_TARGET, 0x28);
 
-	zl10353_calc_nominal_rate(fe, param->u.ofdm.bandwidth, &nominal_rate);
+	if (op->transmission_mode != TRANSMISSION_MODE_AUTO)
+		acq_ctl |= (1 << 0);
+	if (op->guard_interval != GUARD_INTERVAL_AUTO)
+		acq_ctl |= (1 << 1);
+	zl10353_single_write(fe, ACQ_CTL, acq_ctl);
+
+	switch (op->bandwidth) {
+	case BANDWIDTH_6_MHZ:
+		/* These are extrapolated from the 7 and 8MHz values */
+		zl10353_single_write(fe, MCLK_RATIO, 0x97);
+		zl10353_single_write(fe, 0x64, 0x34);
+		break;
+	case BANDWIDTH_7_MHZ:
+		zl10353_single_write(fe, MCLK_RATIO, 0x86);
+		zl10353_single_write(fe, 0x64, 0x35);
+		break;
+	case BANDWIDTH_8_MHZ:
+	default:
+		zl10353_single_write(fe, MCLK_RATIO, 0x75);
+		zl10353_single_write(fe, 0x64, 0x36);
+	}
+
+	zl10353_calc_nominal_rate(fe, op->bandwidth, &nominal_rate);
 	zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate));
 	zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate));
+	state->bandwidth = op->bandwidth;
 
 	zl10353_calc_input_freq(fe, &input_freq);
 	zl10353_single_write(fe, INPUT_FREQ_1, msb(input_freq));
 	zl10353_single_write(fe, INPUT_FREQ_0, lsb(input_freq));
 
+	/* Hint at TPS settings */
+	switch (op->code_rate_HP) {
+	case FEC_2_3:
+		tps |= (1 << 7);
+		break;
+	case FEC_3_4:
+		tps |= (2 << 7);
+		break;
+	case FEC_5_6:
+		tps |= (3 << 7);
+		break;
+	case FEC_7_8:
+		tps |= (4 << 7);
+		break;
+	case FEC_1_2:
+	case FEC_AUTO:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (op->code_rate_LP) {
+	case FEC_2_3:
+		tps |= (1 << 4);
+		break;
+	case FEC_3_4:
+		tps |= (2 << 4);
+		break;
+	case FEC_5_6:
+		tps |= (3 << 4);
+		break;
+	case FEC_7_8:
+		tps |= (4 << 4);
+		break;
+	case FEC_1_2:
+	case FEC_AUTO:
+		break;
+	case FEC_NONE:
+		if (op->hierarchy_information == HIERARCHY_AUTO ||
+		    op->hierarchy_information == HIERARCHY_NONE)
+			break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (op->constellation) {
+	case QPSK:
+		break;
+	case QAM_AUTO:
+	case QAM_16:
+		tps |= (1 << 13);
+		break;
+	case QAM_64:
+		tps |= (2 << 13);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (op->transmission_mode) {
+	case TRANSMISSION_MODE_2K:
+	case TRANSMISSION_MODE_AUTO:
+		break;
+	case TRANSMISSION_MODE_8K:
+		tps |= (1 << 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (op->guard_interval) {
+	case GUARD_INTERVAL_1_32:
+	case GUARD_INTERVAL_AUTO:
+		break;
+	case GUARD_INTERVAL_1_16:
+		tps |= (1 << 2);
+		break;
+	case GUARD_INTERVAL_1_8:
+		tps |= (2 << 2);
+		break;
+	case GUARD_INTERVAL_1_4:
+		tps |= (3 << 2);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (op->hierarchy_information) {
+	case HIERARCHY_AUTO:
+	case HIERARCHY_NONE:
+		break;
+	case HIERARCHY_1:
+		tps |= (1 << 10);
+		break;
+	case HIERARCHY_2:
+		tps |= (2 << 10);
+		break;
+	case HIERARCHY_4:
+		tps |= (3 << 10);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	zl10353_single_write(fe, TPS_GIVEN_1, msb(tps));
+	zl10353_single_write(fe, TPS_GIVEN_0, lsb(tps));
+
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
 
@@ -244,12 +375,97 @@
 	else
 		zl10353_single_write(fe, TUNER_GO, 0x01);
 
-	udelay(250);
-	zl10353_single_write(fe, 0xE4, 0x00);
-	zl10353_single_write(fe, 0xE5, 0x2A);
-	zl10353_single_write(fe, 0xE9, 0x02);
-	zl10353_single_write(fe, 0xE7, 0x40);
-	zl10353_single_write(fe, 0xE8, 0x10);
+	return 0;
+}
+
+static int zl10353_get_parameters(struct dvb_frontend *fe,
+				  struct dvb_frontend_parameters *param)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+	struct dvb_ofdm_parameters *op = &param->u.ofdm;
+	int s6, s9;
+	u16 tps;
+	static const u8 tps_fec_to_api[8] = {
+		FEC_1_2,
+		FEC_2_3,
+		FEC_3_4,
+		FEC_5_6,
+		FEC_7_8,
+		FEC_AUTO,
+		FEC_AUTO,
+		FEC_AUTO
+	};
+
+	s6 = zl10353_read_register(state, STATUS_6);
+	s9 = zl10353_read_register(state, STATUS_9);
+	if (s6 < 0 || s9 < 0)
+		return -EREMOTEIO;
+	if ((s6 & (1 << 5)) == 0 || (s9 & (1 << 4)) == 0)
+		return -EINVAL;	/* no FE or TPS lock */
+
+	tps = zl10353_read_register(state, TPS_RECEIVED_1) << 8 |
+	      zl10353_read_register(state, TPS_RECEIVED_0);
+
+	op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
+	op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
+
+	switch ((tps >> 13) & 3) {
+	case 0:
+		op->constellation = QPSK;
+		break;
+	case 1:
+		op->constellation = QAM_16;
+		break;
+	case 2:
+		op->constellation = QAM_64;
+		break;
+	default:
+		op->constellation = QAM_AUTO;
+		break;
+	}
+
+	op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K :
+					       TRANSMISSION_MODE_2K;
+
+	switch ((tps >> 2) & 3) {
+	case 0:
+		op->guard_interval = GUARD_INTERVAL_1_32;
+		break;
+	case 1:
+		op->guard_interval = GUARD_INTERVAL_1_16;
+		break;
+	case 2:
+		op->guard_interval = GUARD_INTERVAL_1_8;
+		break;
+	case 3:
+		op->guard_interval = GUARD_INTERVAL_1_4;
+		break;
+	default:
+		op->guard_interval = GUARD_INTERVAL_AUTO;
+		break;
+	}
+
+	switch ((tps >> 10) & 7) {
+	case 0:
+		op->hierarchy_information = HIERARCHY_NONE;
+		break;
+	case 1:
+		op->hierarchy_information = HIERARCHY_1;
+		break;
+	case 2:
+		op->hierarchy_information = HIERARCHY_2;
+		break;
+	case 3:
+		op->hierarchy_information = HIERARCHY_4;
+		break;
+	default:
+		op->hierarchy_information = HIERARCHY_AUTO;
+		break;
+	}
+
+	param->frequency = 0;
+	op->bandwidth = state->bandwidth;
+	param->inversion = INVERSION_AUTO;
 
 	return 0;
 }
@@ -438,6 +654,7 @@
 	.write = zl10353_write,
 
 	.set_frontend = zl10353_set_parameters,
+	.get_frontend = zl10353_get_parameters,
 	.get_tune_settings = zl10353_get_tune_settings,
 
 	.read_status = zl10353_read_status,