| /* |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| #include <dt-bindings/clock/rk3036-cru.h> |
| #include <dt-bindings/soc/rockchip,boot-mode.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| compatible = "rockchip,rk3036"; |
| |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| mshc0 = &emmc; |
| mshc1 = &sdmmc; |
| mshc2 = &sdio; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| spi = &spi; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "rockchip,rk3036-smp"; |
| |
| cpu0: cpu@f00 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf00>; |
| resets = <&cru SRST_CORE0>; |
| operating-points = < |
| /* KHz uV */ |
| 816000 1000000 |
| >; |
| clock-latency = <40000>; |
| clocks = <&cru ARMCLK>; |
| }; |
| |
| cpu1: cpu@f01 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0xf01>; |
| resets = <&cru SRST_CORE1>; |
| }; |
| }; |
| |
| amba { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pdma: pdma@20078000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x20078000 0x4000>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| arm,pl330-broken-no-flushp; |
| clocks = <&cru ACLK_DMAC2>; |
| clock-names = "apb_pclk"; |
| }; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>; |
| }; |
| |
| display-subsystem { |
| compatible = "rockchip,display-subsystem"; |
| ports = <&vop_out>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| arm,cpu-registers-not-fw-configured; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| clock-frequency = <24000000>; |
| }; |
| |
| xin24m: oscillator { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xin24m"; |
| #clock-cells = <0>; |
| }; |
| |
| bus_intmem@10080000 { |
| compatible = "mmio-sram"; |
| reg = <0x10080000 0x2000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x10080000 0x2000>; |
| |
| smp-sram@0 { |
| compatible = "rockchip,rk3066-smp-sram"; |
| reg = <0x00 0x10>; |
| }; |
| }; |
| |
| vop: vop@10118000 { |
| compatible = "rockchip,rk3036-vop"; |
| reg = <0x10118000 0x19c>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>; |
| clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; |
| resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>; |
| reset-names = "axi", "ahb", "dclk"; |
| iommus = <&vop_mmu>; |
| status = "disabled"; |
| |
| vop_out: port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| vop_out_hdmi: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&hdmi_in_vop>; |
| }; |
| }; |
| }; |
| |
| vop_mmu: iommu@10118300 { |
| compatible = "rockchip,iommu"; |
| reg = <0x10118300 0x100>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "vop_mmu"; |
| #iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@10139000 { |
| compatible = "arm,gic-400"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| |
| reg = <0x10139000 0x1000>, |
| <0x1013a000 0x2000>, |
| <0x1013c000 0x2000>, |
| <0x1013e000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| usb_otg: usb@10180000 { |
| compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", |
| "snps,dwc2"; |
| reg = <0x10180000 0x40000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_OTG0>; |
| clock-names = "otg"; |
| dr_mode = "otg"; |
| g-np-tx-fifo-size = <16>; |
| g-rx-fifo-size = <275>; |
| g-tx-fifo-size = <256 128 128 64 64 32>; |
| status = "disabled"; |
| }; |
| |
| usb_host: usb@101c0000 { |
| compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", |
| "snps,dwc2"; |
| reg = <0x101c0000 0x40000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru HCLK_OTG1>; |
| clock-names = "otg"; |
| dr_mode = "host"; |
| status = "disabled"; |
| }; |
| |
| emac: ethernet@10200000 { |
| compatible = "rockchip,rk3036-emac", "snps,arc-emac"; |
| reg = <0x10200000 0x4000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| rockchip,grf = <&grf>; |
| clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; |
| clock-names = "hclk", "macref", "macclk"; |
| /* |
| * Fix the emac parent clock is DPLL instead of APLL. |
| * since that will cause some unstable things if the cpufreq |
| * is working. (e.g: the accurate 50MHz what mac_ref need) |
| */ |
| assigned-clocks = <&cru SCLK_MACPLL>; |
| assigned-clock-parents = <&cru PLL_DPLL>; |
| max-speed = <100>; |
| phy-mode = "rmii"; |
| status = "disabled"; |
| }; |
| |
| sdmmc: dwmmc@10214000 { |
| compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x10214000 0x4000>; |
| clock-frequency = <37500000>; |
| max-frequency = <37500000>; |
| clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x100>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&cru SRST_MMC0>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| sdio: dwmmc@10218000 { |
| compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x10218000 0x4000>; |
| max-frequency = <37500000>; |
| clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, |
| <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; |
| fifo-depth = <0x100>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&cru SRST_SDIO>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| emmc: dwmmc@1021c000 { |
| compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| reg = <0x1021c000 0x4000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| bus-width = <8>; |
| cap-mmc-highspeed; |
| clock-frequency = <37500000>; |
| max-frequency = <37500000>; |
| clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, |
| <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; |
| default-sample-phase = <158>; |
| disable-wp; |
| dmas = <&pdma 12>; |
| dma-names = "rx-tx"; |
| fifo-depth = <0x100>; |
| mmc-ddr-1_8v; |
| non-removable; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| resets = <&cru SRST_EMMC>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| i2s: i2s@10220000 { |
| compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x10220000 0x4000>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; |
| dmas = <&pdma 0>, <&pdma 1>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s_bus>; |
| status = "disabled"; |
| }; |
| |
| cru: clock-controller@20000000 { |
| compatible = "rockchip,rk3036-cru"; |
| reg = <0x20000000 0x1000>; |
| rockchip,grf = <&grf>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| assigned-clocks = <&cru PLL_GPLL>; |
| assigned-clock-rates = <594000000>; |
| }; |
| |
| grf: syscon@20008000 { |
| compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd"; |
| reg = <0x20008000 0x1000>; |
| |
| reboot-mode { |
| compatible = "syscon-reboot-mode"; |
| offset = <0x1d8>; |
| mode-normal = <BOOT_NORMAL>; |
| mode-recovery = <BOOT_RECOVERY>; |
| mode-bootloader = <BOOT_FASTBOOT>; |
| mode-loader = <BOOT_BL_DOWNLOAD>; |
| }; |
| }; |
| |
| acodec: acodec-ana@20030000 { |
| compatible = "rk3036-codec"; |
| reg = <0x20030000 0x4000>; |
| rockchip,grf = <&grf>; |
| clock-names = "acodec_pclk"; |
| clocks = <&cru PCLK_ACODEC>; |
| status = "disabled"; |
| }; |
| |
| hdmi: hdmi@20034000 { |
| compatible = "rockchip,rk3036-inno-hdmi"; |
| reg = <0x20034000 0x4000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_HDMI>; |
| clock-names = "pclk"; |
| rockchip,grf = <&grf>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_ctl>; |
| status = "disabled"; |
| |
| hdmi_in: port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| hdmi_in_vop: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&vop_out_hdmi>; |
| }; |
| }; |
| }; |
| |
| timer: timer@20044000 { |
| compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; |
| reg = <0x20044000 0x20>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&xin24m>, <&cru PCLK_TIMER>; |
| clock-names = "timer", "pclk"; |
| }; |
| |
| pwm0: pwm@20050000 { |
| compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| reg = <0x20050000 0x10>; |
| #pwm-cells = <3>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm0_pin>; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@20050010 { |
| compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| reg = <0x20050010 0x10>; |
| #pwm-cells = <3>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm1_pin>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@20050020 { |
| compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| reg = <0x20050020 0x10>; |
| #pwm-cells = <3>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm2_pin>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@20050030 { |
| compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| reg = <0x20050030 0x10>; |
| #pwm-cells = <2>; |
| clocks = <&cru PCLK_PWM>; |
| clock-names = "pwm"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm3_pin>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@20056000 { |
| compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x20056000 0x1000>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_xfer>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@2005a000 { |
| compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x2005a000 0x1000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_xfer>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@20060000 { |
| compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; |
| reg = <0x20060000 0x100>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@20064000 { |
| compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; |
| reg = <0x20064000 0x100>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_xfer>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@20068000 { |
| compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; |
| reg = <0x20068000 0x100>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clock-frequency = <24000000>; |
| clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_xfer>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@20072000 { |
| compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; |
| reg = <0x20072000 0x1000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-names = "i2c"; |
| clocks = <&cru PCLK_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_xfer>; |
| status = "disabled"; |
| }; |
| |
| spi: spi@20074000 { |
| compatible = "rockchip,rockchip-spi"; |
| reg = <0x20074000 0x1000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>; |
| clock-names = "apb-pclk","spi_pclk"; |
| dmas = <&pdma 8>, <&pdma 9>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "rockchip,rk3036-pinctrl"; |
| rockchip,grf = <&grf>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gpio0: gpio0@2007c000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x2007c000 0x100>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio1@20080000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20080000 0x100>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO1>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio2@20084000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x20084000 0x100>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cru PCLK_GPIO2>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pcfg_pull_default: pcfg_pull_default { |
| bias-pull-pin-default; |
| }; |
| |
| pcfg_pull_none: pcfg-pull-none { |
| bias-disable; |
| }; |
| |
| pwm0 { |
| pwm0_pin: pwm0-pin { |
| rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm1 { |
| pwm1_pin: pwm1-pin { |
| rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm2 { |
| pwm2_pin: pwm2-pin { |
| rockchip,pins = <0 1 2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm3 { |
| pwm3_pin: pwm3-pin { |
| rockchip,pins = <0 27 1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| sdmmc { |
| sdmmc_clk: sdmmc-clk { |
| rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| sdmmc_cmd: sdmmc-cmd { |
| rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sdmmc_cd: sdmmc-cd { |
| rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sdmmc_bus1: sdmmc-bus1 { |
| rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sdmmc_bus4: sdmmc-bus4 { |
| rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>, |
| <1 19 RK_FUNC_1 &pcfg_pull_default>, |
| <1 20 RK_FUNC_1 &pcfg_pull_default>, |
| <1 21 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| sdio { |
| sdio_bus1: sdio-bus1 { |
| rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sdio_bus4: sdio-bus4 { |
| rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>, |
| <0 12 RK_FUNC_1 &pcfg_pull_default>, |
| <0 13 RK_FUNC_1 &pcfg_pull_default>, |
| <0 14 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sdio_cmd: sdio-cmd { |
| rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| sdio_clk: sdio-clk { |
| rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| emmc { |
| /* |
| * We run eMMC at max speed; bump up drive strength. |
| * We also have external pulls, so disable the internal ones. |
| */ |
| emmc_clk: emmc-clk { |
| rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| emmc_cmd: emmc-cmd { |
| rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| |
| emmc_bus8: emmc-bus8 { |
| rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>, |
| <1 25 RK_FUNC_2 &pcfg_pull_default>, |
| <1 26 RK_FUNC_2 &pcfg_pull_default>, |
| <1 27 RK_FUNC_2 &pcfg_pull_default>, |
| <1 28 RK_FUNC_2 &pcfg_pull_default>, |
| <1 29 RK_FUNC_2 &pcfg_pull_default>, |
| <1 30 RK_FUNC_2 &pcfg_pull_default>, |
| <1 31 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| }; |
| |
| emac { |
| emac_xfer: emac-xfer { |
| rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */ |
| <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */ |
| <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */ |
| <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */ |
| <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */ |
| <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */ |
| <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */ |
| <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */ |
| }; |
| |
| emac_mdio: emac-mdio { |
| rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */ |
| <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */ |
| }; |
| }; |
| |
| i2c0 { |
| i2c0_xfer: i2c0-xfer { |
| rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, |
| <0 1 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c1 { |
| i2c1_xfer: i2c1-xfer { |
| rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, |
| <0 3 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c2 { |
| i2c2_xfer: i2c2-xfer { |
| rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, |
| <2 21 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2s { |
| i2s_bus: i2s-bus { |
| rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>, |
| <1 1 RK_FUNC_1 &pcfg_pull_default>, |
| <1 2 RK_FUNC_1 &pcfg_pull_default>, |
| <1 3 RK_FUNC_1 &pcfg_pull_default>, |
| <1 4 RK_FUNC_1 &pcfg_pull_default>, |
| <1 5 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| }; |
| |
| hdmi { |
| hdmi_ctl: hdmi-ctl { |
| rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>, |
| <1 9 RK_FUNC_1 &pcfg_pull_none>, |
| <1 10 RK_FUNC_1 &pcfg_pull_none>, |
| <1 11 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart0 { |
| uart0_xfer: uart0-xfer { |
| rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>, |
| <0 17 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart0_cts: uart0-cts { |
| rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>; |
| }; |
| |
| uart0_rts: uart0-rts { |
| rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart1 { |
| uart1_xfer: uart1-xfer { |
| rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>, |
| <2 23 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| /* no rts / cts for uart1 */ |
| }; |
| |
| uart2 { |
| uart2_xfer: uart2-xfer { |
| rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>, |
| <1 19 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| /* no rts / cts for uart2 */ |
| }; |
| |
| spi { |
| spi_txd:spi-txd { |
| rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; |
| }; |
| |
| spi_rxd:spi-rxd { |
| rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>; |
| }; |
| |
| spi_clk:spi-clk { |
| rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>; |
| }; |
| |
| spi_cs0:spi-cs0 { |
| rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>; |
| |
| }; |
| |
| spi_cs1:spi-cs1 { |
| rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>; |
| |
| }; |
| }; |
| }; |
| }; |