ARM: integrator: define clocks in the device trees
This adds the clock definitions to the Integrator/CP
and Integrator/AP device trees.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index e6be931..b10e635 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -18,6 +18,28 @@
bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
};
+ /* 24 MHz chrystal on the core module */
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The UART clock is 14.74 MHz divided by an ICS525 */
+ uartclk: uartclk@14.74M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ };
+
syscon {
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
@@ -28,14 +50,17 @@
timer0: timer@13000000 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
timer1: timer@13000100 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
timer2: timer@13000200 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
pic: pic@14000000 {
@@ -92,26 +117,36 @@
rtc: rtc@15000000 {
compatible = "arm,pl030", "arm,primecell";
arm,primecell-periphid = <0x00041030>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart0: uart@16000000 {
compatible = "arm,pl010", "arm,primecell";
arm,primecell-periphid = <0x00041010>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart1: uart@17000000 {
compatible = "arm,pl010", "arm,primecell";
arm,primecell-periphid = <0x00041010>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
kmi0: kmi@18000000 {
compatible = "arm,pl050", "arm,primecell";
arm,primecell-periphid = <0x00041050>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi1: kmi@19000000 {
compatible = "arm,pl050", "arm,primecell";
arm,primecell-periphid = <0x00041050>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
};
};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index a21c17d..d43f15b 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -13,25 +13,107 @@
bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
};
+ /*
+ * The Integrator/CP overall clocking architecture can be found in
+ * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+ * appear to illustrate the layout used in most configurations.
+ */
+
+ /* The codec chrystal operates at 24.576 MHz */
+ xtal_codec: xtal24.576@24.576M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ /* The chrystal is divided by 2 by the codec for the AACI bit clock */
+ aaci_bitclk: aaci_bitclk@12.288M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&xtal_codec>;
+ };
+
+ /* This is a 25MHz chrystal on the base board */
+ xtal25mhz: xtal25mhz@25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+ uartclk: uartclk@14.74M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ };
+
+ /* Actually sysclk I think */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ core-module@10000000 {
+ /* 24 MHz chrystal on the core module */
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ /*
+ * External oscillator on the core module, usually used
+ * to drive video circuitry. Driven from the 24MHz clock.
+ */
+ auxosc: cm_aux_osc@25M {
+ #clock-cells = <0>;
+ compatible = "arm,integrator-cm-auxosc";
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+ kmiclk: kmiclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <3>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The timer clock is the 24 MHz oscillator divided to 1MHz */
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
syscon {
compatible = "arm,integrator-cp-syscon";
reg = <0xcb000000 0x100>;
};
timer0: timer@13000000 {
- /* TIMER0 runs @ 25MHz */
+ /* TIMER0 runs directly on the 25MHz chrystal */
compatible = "arm,integrator-cp-timer";
- status = "disabled";
+ clocks = <&xtal25mhz>;
};
timer1: timer@13000100 {
/* TIMER1 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
};
timer2: timer@13000200 {
/* TIMER2 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
};
pic: pic@14000000 {
@@ -74,22 +156,32 @@
*/
rtc@15000000 {
compatible = "arm,pl031", "arm,primecell";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart@16000000 {
compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart@17000000 {
compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
kmi@18000000 {
compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@19000000 {
compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
/*
@@ -100,18 +192,24 @@
reg = <0x1c000000 0x1000>;
interrupts = <23 24>;
max-frequency = <515633>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
};
aaci@1d000000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x1d000000 0x1000>;
interrupts = <25>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
clcd@c0000000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xC0000000 0x1000>;
interrupts = <22>;
+ clocks = <&auxosc>, <&pclk>;
+ clock-names = "clcd", "apb_pclk";
};
};
};