[PATCH] mfd: SM501 core driver
This driver provides the core functionality of the SM501, which is a
multi-function chip including two framebuffers, video acceleration, USB,
and many other peripheral blocks.
The driver exports a number of entries for the peripheral drivers to use.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fc3c885..ab6e985 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,6 +2,20 @@
# Multifunction miscellaneous devices
#
+menu "Multifunction device drivers"
+
+config MFD_SM501
+ tristate "Support for Silicon Motion SM501"
+ ---help---
+ This is the core driver for the Silicon Motion SM501 multimedia
+ companion chip. This device is a multifunction device which may
+ provide numerous interfaces including USB host controller USB gadget,
+ Asyncronous Serial ports, Audio functions and a dual display video
+ interface. The device may be connected by PCI or local bus with
+ varying functions enabled.
+
+endmenu
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index adb29b5..5143209 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -2,6 +2,8 @@
# Makefile for multifunction miscellaneous devices
#
+obj-$(CONFIG_MFD_SM501) += sm501.o
+
obj-$(CONFIG_MCP) += mcp-core.o
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
new file mode 100644
index 0000000..5c5a1e2
--- /dev/null
+++ b/drivers/mfd/sm501.c
@@ -0,0 +1,1148 @@
+/* linux/drivers/mfd/sm501.c
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * SM501 MFD driver
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
+#include <asm/io.h>
+
+struct sm501_device {
+ struct list_head list;
+ struct platform_device pdev;
+};
+
+struct sm501_devdata {
+ spinlock_t reg_lock;
+ struct mutex clock_lock;
+ struct list_head devices;
+
+ struct device *dev;
+ struct resource *io_res;
+ struct resource *mem_res;
+ struct resource *regs_claim;
+ struct sm501_platdata *platdata;
+
+ int unit_power[20];
+ unsigned int pdev_id;
+ unsigned int irq;
+ void __iomem *regs;
+};
+
+#define MHZ (1000 * 1000)
+
+#ifdef DEBUG
+static const unsigned int misc_div[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 4,
+ [3] = 8,
+ [4] = 16,
+ [5] = 32,
+ [6] = 64,
+ [7] = 128,
+ [8] = 3,
+ [9] = 6,
+ [10] = 12,
+ [11] = 24,
+ [12] = 48,
+ [13] = 96,
+ [14] = 192,
+ [15] = 384,
+};
+
+static const unsigned int px_div[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 4,
+ [3] = 8,
+ [4] = 16,
+ [5] = 32,
+ [6] = 64,
+ [7] = 128,
+ [8] = 3,
+ [9] = 6,
+ [10] = 12,
+ [11] = 24,
+ [12] = 48,
+ [13] = 96,
+ [14] = 192,
+ [15] = 384,
+ [16] = 5,
+ [17] = 10,
+ [18] = 20,
+ [19] = 40,
+ [20] = 80,
+ [21] = 160,
+ [22] = 320,
+ [23] = 604,
+};
+
+static unsigned long decode_div(unsigned long pll2, unsigned long val,
+ unsigned int lshft, unsigned int selbit,
+ unsigned long mask, const unsigned int *dtab)
+{
+ if (val & selbit)
+ pll2 = 288 * MHZ;
+
+ return pll2 / dtab[(val >> lshft) & mask];
+}
+
+#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
+
+/* sm501_dump_clk
+ *
+ * Print out the current clock configuration for the device
+*/
+
+static void sm501_dump_clk(struct sm501_devdata *sm)
+{
+ unsigned long misct = readl(sm->regs + SM501_MISC_TIMING);
+ unsigned long pm0 = readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
+ unsigned long pm1 = readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
+ unsigned long pmc = readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ unsigned long sdclk0, sdclk1;
+ unsigned long pll2 = 0;
+
+ switch (misct & 0x30) {
+ case 0x00:
+ pll2 = 336 * MHZ;
+ break;
+ case 0x10:
+ pll2 = 288 * MHZ;
+ break;
+ case 0x20:
+ pll2 = 240 * MHZ;
+ break;
+ case 0x30:
+ pll2 = 192 * MHZ;
+ break;
+ }
+
+ sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
+ sdclk0 /= misc_div[((misct >> 8) & 0xf)];
+
+ sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
+ sdclk1 /= misc_div[((misct >> 16) & 0xf)];
+
+ dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
+ misct, pm0, pm1);
+
+ dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
+ fmt_freq(pll2), sdclk0, sdclk1);
+
+ dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
+
+ dev_dbg(sm->dev, "PM0[%c]: "
+ "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
+x "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
+ (pmc & 3 ) == 0 ? '*' : '-',
+ fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31, px_div)),
+ fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15, misc_div)),
+ fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15, misc_div)),
+ fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15, misc_div)));
+
+ dev_dbg(sm->dev, "PM1[%c]: "
+ "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
+ "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
+ (pmc & 3 ) == 1 ? '*' : '-',
+ fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31, px_div)),
+ fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15, misc_div)),
+ fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15, misc_div)),
+ fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15, misc_div)));
+}
+#else
+static void sm501_dump_clk(struct sm501_devdata *sm)
+{
+}
+#endif
+
+/* sm501_sync_regs
+ *
+ * ensure the
+*/
+
+static void sm501_sync_regs(struct sm501_devdata *sm)
+{
+ readl(sm->regs);
+}
+
+/* sm501_misc_control
+ *
+ * alters the misceleneous control parameters
+*/
+
+int sm501_misc_control(struct device *dev,
+ unsigned long set, unsigned long clear)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long misc;
+ unsigned long save;
+ unsigned long to;
+
+ spin_lock_irqsave(&sm->reg_lock, save);
+
+ misc = readl(sm->regs + SM501_MISC_CONTROL);
+ to = (misc & ~clear) | set;
+
+ if (to != misc) {
+ writel(to, sm->regs + SM501_MISC_CONTROL);
+ sm501_sync_regs(sm);
+
+ dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
+ }
+
+ spin_unlock_irqrestore(&sm->reg_lock, save);
+ return to;
+}
+
+EXPORT_SYMBOL_GPL(sm501_misc_control);
+
+/* sm501_modify_reg
+ *
+ * Modify a register in the SM501 which may be shared with other
+ * drivers.
+*/
+
+unsigned long sm501_modify_reg(struct device *dev,
+ unsigned long reg,
+ unsigned long set,
+ unsigned long clear)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long data;
+ unsigned long save;
+
+ spin_lock_irqsave(&sm->reg_lock, save);
+
+ data = readl(sm->regs + reg);
+ data |= set;
+ data &= ~clear;
+
+ writel(data, sm->regs + reg);
+ sm501_sync_regs(sm);
+
+ spin_unlock_irqrestore(&sm->reg_lock, save);
+
+ return data;
+}
+
+EXPORT_SYMBOL_GPL(sm501_modify_reg);
+
+unsigned long sm501_gpio_get(struct device *dev,
+ unsigned long gpio)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long result;
+ unsigned long reg;
+
+ reg = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW;
+ result = readl(sm->regs + reg);
+
+ result >>= (gpio & 31);
+ return result & 1UL;
+}
+
+EXPORT_SYMBOL_GPL(sm501_gpio_get);
+
+void sm501_gpio_set(struct device *dev,
+ unsigned long gpio,
+ unsigned int to,
+ unsigned int dir)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+
+ unsigned long bit = 1 << (gpio & 31);
+ unsigned long base;
+ unsigned long save;
+ unsigned long val;
+
+ base = (gpio > 32) ? SM501_GPIO_DATA_HIGH : SM501_GPIO_DATA_LOW;
+ base += SM501_GPIO;
+
+ spin_lock_irqsave(&sm->reg_lock, save);
+
+ val = readl(sm->regs + base) & ~bit;
+ if (to)
+ val |= bit;
+ writel(val, sm->regs + base);
+
+ val = readl(sm->regs + SM501_GPIO_DDR_LOW) & ~bit;
+ if (dir)
+ val |= bit;
+
+ writel(val, sm->regs + SM501_GPIO_DDR_LOW);
+ sm501_sync_regs(sm);
+
+ spin_unlock_irqrestore(&sm->reg_lock, save);
+
+}
+
+EXPORT_SYMBOL_GPL(sm501_gpio_set);
+
+
+/* sm501_unit_power
+ *
+ * alters the power active gate to set specific units on or off
+ */
+
+int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long mode;
+ unsigned long gate;
+ unsigned long clock;
+
+ mutex_lock(&sm->clock_lock);
+
+ mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ gate = readl(sm->regs + SM501_CURRENT_GATE);
+ clock = readl(sm->regs + SM501_CURRENT_CLOCK);
+
+ mode &= 3; /* get current power mode */
+
+ if (unit > ARRAY_SIZE(sm->unit_power)) {
+ dev_err(dev, "%s: bad unit %d\n", __FUNCTION__, unit);
+ goto already;
+ }
+
+ dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __FUNCTION__, unit,
+ sm->unit_power[unit], to);
+
+ if (to == 0 && sm->unit_power[unit] == 0) {
+ dev_err(sm->dev, "unit %d is already shutdown\n", unit);
+ goto already;
+ }
+
+ sm->unit_power[unit] += to ? 1 : -1;
+ to = sm->unit_power[unit] ? 1 : 0;
+
+ if (to) {
+ if (gate & (1 << unit))
+ goto already;
+ gate |= (1 << unit);
+ } else {
+ if (!(gate & (1 << unit)))
+ goto already;
+ gate &= ~(1 << unit);
+ }
+
+ switch (mode) {
+ case 1:
+ writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+ writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+ mode = 0;
+ break;
+ case 2:
+ case 0:
+ writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+ writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+ mode = 1;
+ break;
+
+ default:
+ return -1;
+ }
+
+ writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+ sm501_sync_regs(sm);
+
+ dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
+ gate, clock, mode);
+
+ msleep(16);
+
+ already:
+ mutex_unlock(&sm->clock_lock);
+ return gate;
+}
+
+EXPORT_SYMBOL_GPL(sm501_unit_power);
+
+
+/* Perform a rounded division. */
+static long sm501fb_round_div(long num, long denom)
+{
+ /* n / d + 1 / 2 = (2n + d) / 2d */
+ return (2 * num + denom) / (2 * denom);
+}
+
+/* clock value structure. */
+struct sm501_clock {
+ unsigned long mclk;
+ int divider;
+ int shift;
+};
+
+/* sm501_select_clock
+ *
+ * selects nearest discrete clock frequency the SM501 can achive
+ * the maximum divisor is 3 or 5
+ */
+static unsigned long sm501_select_clock(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div)
+{
+ unsigned long mclk;
+ int divider;
+ int shift;
+ long diff;
+ long best_diff = 999999999;
+
+ /* Try 288MHz and 336MHz clocks. */
+ for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
+ /* try dividers 1 and 3 for CRT and for panel,
+ try divider 5 for panel only.*/
+
+ for (divider = 1; divider <= max_div; divider += 2) {
+ /* try all 8 shift values.*/
+ for (shift = 0; shift < 8; shift++) {
+ /* Calculate difference to requested clock */
+ diff = sm501fb_round_div(mclk, divider << shift) - freq;
+ if (diff < 0)
+ diff = -diff;
+
+ /* If it is less than the current, use it */
+ if (diff < best_diff) {
+ best_diff = diff;
+
+ clock->mclk = mclk;
+ clock->divider = divider;
+ clock->shift = shift;
+ }
+ }
+ }
+ }
+
+ /* Return best clock. */
+ return clock->mclk / (clock->divider << clock->shift);
+}
+
+/* sm501_set_clock
+ *
+ * set one of the four clock sources to the closest available frequency to
+ * the one specified
+*/
+
+unsigned long sm501_set_clock(struct device *dev,
+ int clksrc,
+ unsigned long req_freq)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
+ unsigned long mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
+ unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
+ unsigned char reg;
+ unsigned long sm501_freq; /* the actual frequency acheived */
+
+ struct sm501_clock to;
+
+ /* find achivable discrete frequency and setup register value
+ * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
+ * has an extra bit for the divider */
+
+ switch (clksrc) {
+ case SM501_CLOCK_P2XCLK:
+ /* This clock is divided in half so to achive the
+ * requested frequency the value must be multiplied by
+ * 2. This clock also has an additional pre divisor */
+
+ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2);
+ reg=to.shift & 0x07;/* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ else if (to.divider == 5)
+ reg |= 0x10; /* /5 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x20; /* which mclk pll is source */
+ break;
+
+ case SM501_CLOCK_V2XCLK:
+ /* This clock is divided in half so to achive the
+ * requested frequency the value must be multiplied by 2. */
+
+ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
+ reg=to.shift & 0x07; /* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x10; /* which mclk pll is source */
+ break;
+
+ case SM501_CLOCK_MCLK:
+ case SM501_CLOCK_M1XCLK:
+ /* These clocks are the same and not further divided */
+
+ sm501_freq = sm501_select_clock( req_freq, &to, 3);
+ reg=to.shift & 0x07; /* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x10; /* which mclk pll is source */
+ break;
+
+ default:
+ return 0; /* this is bad */
+ }
+
+ mutex_lock(&sm->clock_lock);
+
+ mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
+ gate = readl(sm->regs + SM501_CURRENT_GATE);
+ clock = readl(sm->regs + SM501_CURRENT_CLOCK);
+
+ clock = clock & ~(0xFF << clksrc);
+ clock |= reg<<clksrc;
+
+ mode &= 3; /* find current mode */
+
+ switch (mode) {
+ case 1:
+ writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+ writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+ mode = 0;
+ break;
+ case 2:
+ case 0:
+ writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+ writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+ mode = 1;
+ break;
+
+ default:
+ mutex_unlock(&sm->clock_lock);
+ return -1;
+ }
+
+ writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+ sm501_sync_regs(sm);
+
+ dev_info(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
+ gate, clock, mode);
+
+ msleep(16);
+ mutex_unlock(&sm->clock_lock);
+
+ sm501_dump_clk(sm);
+
+ return sm501_freq;
+}
+
+EXPORT_SYMBOL_GPL(sm501_set_clock);
+
+/* sm501_find_clock
+ *
+ * finds the closest available frequency for a given clock
+*/
+
+unsigned long sm501_find_clock(int clksrc,
+ unsigned long req_freq)
+{
+ unsigned long sm501_freq; /* the frequency achiveable by the 501 */
+ struct sm501_clock to;
+
+ switch (clksrc) {
+ case SM501_CLOCK_P2XCLK:
+ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2);
+ break;
+
+ case SM501_CLOCK_V2XCLK:
+ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
+ break;
+
+ case SM501_CLOCK_MCLK:
+ case SM501_CLOCK_M1XCLK:
+ sm501_freq = sm501_select_clock(req_freq, &to, 3);
+ break;
+
+ default:
+ sm501_freq = 0; /* error */
+ }
+
+ return sm501_freq;
+}
+
+EXPORT_SYMBOL_GPL(sm501_find_clock);
+
+static struct sm501_device *to_sm_device(struct platform_device *pdev)
+{
+ return container_of(pdev, struct sm501_device, pdev);
+}
+
+/* sm501_device_release
+ *
+ * A release function for the platform devices we create to allow us to
+ * free any items we allocated
+*/
+
+static void sm501_device_release(struct device *dev)
+{
+ kfree(to_sm_device(to_platform_device(dev)));
+}
+
+/* sm501_create_subdev
+ *
+ * Create a skeleton platform device with resources for passing to a
+ * sub-driver
+*/
+
+static struct platform_device *
+sm501_create_subdev(struct sm501_devdata *sm,
+ char *name, unsigned int res_count)
+{
+ struct sm501_device *smdev;
+
+ smdev = kzalloc(sizeof(struct sm501_device) +
+ sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!smdev)
+ return NULL;
+
+ smdev->pdev.dev.release = sm501_device_release;
+
+ smdev->pdev.name = name;
+ smdev->pdev.id = sm->pdev_id;
+ smdev->pdev.resource = (struct resource *)(smdev+1);
+ smdev->pdev.num_resources = res_count;
+
+ smdev->pdev.dev.parent = sm->dev;
+
+ return &smdev->pdev;
+}
+
+/* sm501_register_device
+ *
+ * Register a platform device created with sm501_create_subdev()
+*/
+
+static int sm501_register_device(struct sm501_devdata *sm,
+ struct platform_device *pdev)
+{
+ struct sm501_device *smdev = to_sm_device(pdev);
+ int ptr;
+ int ret;
+
+ for (ptr = 0; ptr < pdev->num_resources; ptr++) {
+ printk("%s[%d] flags %08lx: %08llx..%08llx\n",
+ pdev->name, ptr,
+ pdev->resource[ptr].flags,
+ (unsigned long long)pdev->resource[ptr].start,
+ (unsigned long long)pdev->resource[ptr].end);
+ }
+
+ ret = platform_device_register(pdev);
+
+ if (ret >= 0) {
+ dev_dbg(sm->dev, "registered %s\n", pdev->name);
+ list_add_tail(&smdev->list, &sm->devices);
+ } else
+ dev_err(sm->dev, "error registering %s (%d)\n",
+ pdev->name, ret);
+
+ return ret;
+}
+
+/* sm501_create_subio
+ *
+ * Fill in an IO resource for a sub device
+*/
+
+static void sm501_create_subio(struct sm501_devdata *sm,
+ struct resource *res,
+ resource_size_t offs,
+ resource_size_t size)
+{
+ res->flags = IORESOURCE_MEM;
+ res->parent = sm->io_res;
+ res->start = sm->io_res->start + offs;
+ res->end = res->start + size - 1;
+}
+
+/* sm501_create_mem
+ *
+ * Fill in an MEM resource for a sub device
+*/
+
+static void sm501_create_mem(struct sm501_devdata *sm,
+ struct resource *res,
+ resource_size_t *offs,
+ resource_size_t size)
+{
+ *offs -= size; /* adjust memory size */
+
+ res->flags = IORESOURCE_MEM;
+ res->parent = sm->mem_res;
+ res->start = sm->mem_res->start + *offs;
+ res->end = res->start + size - 1;
+}
+
+/* sm501_create_irq
+ *
+ * Fill in an IRQ resource for a sub device
+*/
+
+static void sm501_create_irq(struct sm501_devdata *sm,
+ struct resource *res)
+{
+ res->flags = IORESOURCE_IRQ;
+ res->parent = NULL;
+ res->start = res->end = sm->irq;
+}
+
+static int sm501_register_usbhost(struct sm501_devdata *sm,
+ resource_size_t *mem_avail)
+{
+ struct platform_device *pdev;
+
+ pdev = sm501_create_subdev(sm, "sm501-usb", 3);
+ if (!pdev)
+ return -ENOMEM;
+
+ sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
+ sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
+ sm501_create_irq(sm, &pdev->resource[2]);
+
+ return sm501_register_device(sm, pdev);
+}
+
+static int sm501_register_display(struct sm501_devdata *sm,
+ resource_size_t *mem_avail)
+{
+ struct platform_device *pdev;
+
+ pdev = sm501_create_subdev(sm, "sm501-fb", 4);
+ if (!pdev)
+ return -ENOMEM;
+
+ sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
+ sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
+ sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
+ sm501_create_irq(sm, &pdev->resource[3]);
+
+ return sm501_register_device(sm, pdev);
+}
+
+/* sm501_dbg_regs
+ *
+ * Debug attribute to attach to parent device to show core registers
+*/
+
+static ssize_t sm501_dbg_regs(struct device *dev,
+ struct device_attribute *attr, char *buff)
+{
+ struct sm501_devdata *sm = dev_get_drvdata(dev) ;
+ unsigned int reg;
+ char *ptr = buff;
+ int ret;
+
+ for (reg = 0x00; reg < 0x70; reg += 4) {
+ ret = sprintf(ptr, "%08x = %08x\n",
+ reg, readl(sm->regs + reg));
+ ptr += ret;
+ }
+
+ return ptr - buff;
+}
+
+
+static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL);
+
+/* sm501_init_reg
+ *
+ * Helper function for the init code to setup a register
+*/
+
+static inline void sm501_init_reg(struct sm501_devdata *sm,
+ unsigned long reg,
+ struct sm501_reg_init *r)
+{
+ unsigned long tmp;
+
+ tmp = readl(sm->regs + reg);
+ tmp |= r->set;
+ tmp &= ~r->mask;
+ writel(tmp, sm->regs + reg);
+}
+
+/* sm501_init_regs
+ *
+ * Setup core register values
+*/
+
+static void sm501_init_regs(struct sm501_devdata *sm,
+ struct sm501_initdata *init)
+{
+ sm501_misc_control(sm->dev,
+ init->misc_control.set,
+ init->misc_control.mask);
+
+ sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
+ sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
+ sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
+
+ if (init->mclk) {
+ dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
+ sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
+ }
+
+ if (init->m1xclk) {
+ dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
+ sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
+ }
+}
+
+static unsigned int sm501_mem_local[] = {
+ [0] = 4*1024*1024,
+ [1] = 8*1024*1024,
+ [2] = 16*1024*1024,
+ [3] = 32*1024*1024,
+ [4] = 64*1024*1024,
+ [5] = 2*1024*1024,
+};
+
+/* sm501_init_dev
+ *
+ * Common init code for an SM501
+*/
+
+static int sm501_init_dev(struct sm501_devdata *sm)
+{
+ resource_size_t mem_avail;
+ unsigned long dramctrl;
+ int ret;
+
+ mutex_init(&sm->clock_lock);
+ spin_lock_init(&sm->reg_lock);
+
+ INIT_LIST_HEAD(&sm->devices);
+
+ dramctrl = readl(sm->regs + SM501_DRAM_CONTROL);
+
+ mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
+
+ dev_info(sm->dev, "SM501 At %p: Version %08x, %ld Mb, IRQ %d\n",
+ sm->regs, readl(sm->regs + SM501_DEVICEID),
+ (unsigned long)mem_avail >> 20, sm->irq);
+
+ dev_info(sm->dev, "CurrentGate %08x\n", readl(sm->regs+0x38));
+ dev_info(sm->dev, "CurrentClock %08x\n", readl(sm->regs+0x3c));
+ dev_info(sm->dev, "PowerModeControl %08x\n", readl(sm->regs+0x54));
+
+ ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
+ if (ret)
+ dev_err(sm->dev, "failed to create debug regs file\n");
+
+ sm501_dump_clk(sm);
+
+ /* check to see if we have some device initialisation */
+
+ if (sm->platdata) {
+ struct sm501_platdata *pdata = sm->platdata;
+
+ if (pdata->init) {
+ sm501_init_regs(sm, sm->platdata->init);
+
+ if (pdata->init->devices & SM501_USE_USB_HOST)
+ sm501_register_usbhost(sm, &mem_avail);
+ }
+ }
+
+ /* always create a framebuffer */
+ sm501_register_display(sm, &mem_avail);
+
+ return 0;
+}
+
+static int sm501_plat_probe(struct platform_device *dev)
+{
+ struct sm501_devdata *sm;
+ int err;
+
+ sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
+ if (sm == NULL) {
+ dev_err(&dev->dev, "no memory for device data\n");
+ err = -ENOMEM;
+ goto err1;
+ }
+
+ sm->dev = &dev->dev;
+ sm->pdev_id = dev->id;
+ sm->irq = platform_get_irq(dev, 0);
+ sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ sm->platdata = dev->dev.platform_data;
+
+ if (sm->irq < 0) {
+ dev_err(&dev->dev, "failed to get irq resource\n");
+ err = sm->irq;
+ goto err_res;
+ }
+
+ if (sm->io_res == NULL || sm->mem_res == NULL) {
+ dev_err(&dev->dev, "failed to get IO resource\n");
+ err = -ENOENT;
+ goto err_res;
+ }
+
+ sm->regs_claim = request_mem_region(sm->io_res->start,
+ 0x100, "sm501");
+
+ if (sm->regs_claim == NULL) {
+ dev_err(&dev->dev, "cannot claim registers\n");
+ err= -EBUSY;
+ goto err_res;
+ }
+
+ platform_set_drvdata(dev, sm);
+
+ sm->regs = ioremap(sm->io_res->start,
+ (sm->io_res->end - sm->io_res->start) - 1);
+
+ if (sm->regs == NULL) {
+ dev_err(&dev->dev, "cannot remap registers\n");
+ err = -EIO;
+ goto err_claim;
+ }
+
+ return sm501_init_dev(sm);
+
+ err_claim:
+ release_resource(sm->regs_claim);
+ kfree(sm->regs_claim);
+ err_res:
+ kfree(sm);
+ err1:
+ return err;
+
+}
+
+/* Initialisation data for PCI devices */
+
+static struct sm501_initdata sm501_pci_initdata = {
+ .gpio_high = {
+ .set = 0x3F000000, /* 24bit panel */
+ .mask = 0x0,
+ },
+ .misc_timing = {
+ .set = 0x010100, /* SDRAM timing */
+ .mask = 0x1F1F00,
+ },
+ .misc_control = {
+ .set = SM501_MISC_PNL_24BIT,
+ .mask = 0,
+ },
+
+ .devices = SM501_USE_ALL,
+ .mclk = 100 * MHZ,
+ .m1xclk = 160 * MHZ,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
+ .flags = (SM501FB_FLAG_USE_INIT_MODE |
+ SM501FB_FLAG_USE_HWCURSOR |
+ SM501FB_FLAG_USE_HWACCEL |
+ SM501FB_FLAG_DISABLE_AT_EXIT),
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+ .fb_route = SM501_FB_OWN,
+ .fb_crt = &sm501_pdata_fbsub,
+ .fb_pnl = &sm501_pdata_fbsub,
+};
+
+static struct sm501_platdata sm501_pci_platdata = {
+ .init = &sm501_pci_initdata,
+ .fb = &sm501_fb_pdata,
+};
+
+static int sm501_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct sm501_devdata *sm;
+ int err;
+
+ sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
+ if (sm == NULL) {
+ dev_err(&dev->dev, "no memory for device data\n");
+ err = -ENOMEM;
+ goto err1;
+ }
+
+ /* set a default set of platform data */
+ dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
+
+ /* set a hopefully unique id for our child platform devices */
+ sm->pdev_id = 32 + dev->devfn;
+
+ pci_set_drvdata(dev, sm);
+
+ err = pci_enable_device(dev);
+ if (err) {
+ dev_err(&dev->dev, "cannot enable device\n");
+ goto err2;
+ }
+
+ sm->dev = &dev->dev;
+ sm->irq = dev->irq;
+
+#ifdef __BIG_ENDIAN
+ /* if the system is big-endian, we most probably have a
+ * translation in the IO layer making the PCI bus little endian
+ * so make the framebuffer swapped pixels */
+
+ sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
+#endif
+
+ /* check our resources */
+
+ if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
+ dev_err(&dev->dev, "region #0 is not memory?\n");
+ err = -EINVAL;
+ goto err3;
+ }
+
+ if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
+ dev_err(&dev->dev, "region #1 is not memory?\n");
+ err = -EINVAL;
+ goto err3;
+ }
+
+ /* make our resources ready for sharing */
+
+ sm->io_res = &dev->resource[1];
+ sm->mem_res = &dev->resource[0];
+
+ sm->regs_claim = request_mem_region(sm->io_res->start,
+ 0x100, "sm501");
+ if (sm->regs_claim == NULL) {
+ dev_err(&dev->dev, "cannot claim registers\n");
+ err= -EBUSY;
+ goto err3;
+ }
+
+ sm->regs = ioremap(pci_resource_start(dev, 1),
+ pci_resource_len(dev, 1));
+
+ if (sm->regs == NULL) {
+ dev_err(&dev->dev, "cannot remap registers\n");
+ err = -EIO;
+ goto err4;
+ }
+
+ sm501_init_dev(sm);
+ return 0;
+
+ err4:
+ release_resource(sm->regs_claim);
+ kfree(sm->regs_claim);
+ err3:
+ pci_disable_device(dev);
+ err2:
+ pci_set_drvdata(dev, NULL);
+ kfree(sm);
+ err1:
+ return err;
+}
+
+static void sm501_remove_sub(struct sm501_devdata *sm,
+ struct sm501_device *smdev)
+{
+ list_del(&smdev->list);
+ platform_device_unregister(&smdev->pdev);
+}
+
+static void sm501_dev_remove(struct sm501_devdata *sm)
+{
+ struct sm501_device *smdev, *tmp;
+
+ list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
+ sm501_remove_sub(sm, smdev);
+
+ device_remove_file(sm->dev, &dev_attr_dbg_regs);
+}
+
+static void sm501_pci_remove(struct pci_dev *dev)
+{
+ struct sm501_devdata *sm = pci_get_drvdata(dev);
+
+ sm501_dev_remove(sm);
+ iounmap(sm->regs);
+
+ release_resource(sm->regs_claim);
+ kfree(sm->regs_claim);
+
+ pci_set_drvdata(dev, NULL);
+ pci_disable_device(dev);
+}
+
+static int sm501_plat_remove(struct platform_device *dev)
+{
+ struct sm501_devdata *sm = platform_get_drvdata(dev);
+
+ sm501_dev_remove(sm);
+ iounmap(sm->regs);
+
+ release_resource(sm->regs_claim);
+ kfree(sm->regs_claim);
+
+ return 0;
+}
+
+static struct pci_device_id sm501_pci_tbl[] = {
+ { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
+
+static struct pci_driver sm501_pci_drv = {
+ .name = "sm501",
+ .id_table = sm501_pci_tbl,
+ .probe = sm501_pci_probe,
+ .remove = sm501_pci_remove,
+};
+
+static struct platform_driver sm501_plat_drv = {
+ .driver = {
+ .name = "sm501",
+ .owner = THIS_MODULE,
+ },
+ .probe = sm501_plat_probe,
+ .remove = sm501_plat_remove,
+};
+
+static int __init sm501_base_init(void)
+{
+ platform_driver_register(&sm501_plat_drv);
+ return pci_module_init(&sm501_pci_drv);
+}
+
+static void __exit sm501_base_exit(void)
+{
+ platform_driver_unregister(&sm501_plat_drv);
+ pci_unregister_driver(&sm501_pci_drv);
+}
+
+module_init(sm501_base_init);
+module_exit(sm501_base_exit);
+
+MODULE_DESCRIPTION("SM501 Core Driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/sm501-regs.h b/include/linux/sm501-regs.h
new file mode 100644
index 0000000..cc9be4a
--- /dev/null
+++ b/include/linux/sm501-regs.h
@@ -0,0 +1,357 @@
+/* sm501-regs.h
+ *
+ * Copyright 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Silicon Motion SM501 register definitions
+*/
+
+/* System Configuration area */
+/* System config base */
+#define SM501_SYS_CONFIG (0x000000)
+
+/* config 1 */
+#define SM501_SYSTEM_CONTROL (0x000000)
+#define SM501_MISC_CONTROL (0x000004)
+
+#define SM501_MISC_BUS_SH (0x0)
+#define SM501_MISC_BUS_PCI (0x1)
+#define SM501_MISC_BUS_XSCALE (0x2)
+#define SM501_MISC_BUS_NEC (0x6)
+#define SM501_MISC_BUS_MASK (0x7)
+
+#define SM501_MISC_VR_62MB (1<<3)
+#define SM501_MISC_CDR_RESET (1<<7)
+#define SM501_MISC_USB_LB (1<<8)
+#define SM501_MISC_USB_SLAVE (1<<9)
+#define SM501_MISC_BL_1 (1<<10)
+#define SM501_MISC_MC (1<<11)
+#define SM501_MISC_DAC_POWER (1<<12)
+#define SM501_MISC_IRQ_INVERT (1<<16)
+#define SM501_MISC_SH (1<<17)
+
+#define SM501_MISC_HOLD_EMPTY (0<<18)
+#define SM501_MISC_HOLD_8 (1<<18)
+#define SM501_MISC_HOLD_16 (2<<18)
+#define SM501_MISC_HOLD_24 (3<<18)
+#define SM501_MISC_HOLD_32 (4<<18)
+#define SM501_MISC_HOLD_MASK (7<<18)
+
+#define SM501_MISC_FREQ_12 (1<<24)
+#define SM501_MISC_PNL_24BIT (1<<25)
+#define SM501_MISC_8051_LE (1<<26)
+
+
+
+#define SM501_GPIO31_0_CONTROL (0x000008)
+#define SM501_GPIO63_32_CONTROL (0x00000C)
+#define SM501_DRAM_CONTROL (0x000010)
+
+/* command list */
+#define SM501_ARBTRTN_CONTROL (0x000014)
+
+/* command list */
+#define SM501_COMMAND_LIST_STATUS (0x000024)
+
+/* interrupt debug */
+#define SM501_RAW_IRQ_STATUS (0x000028)
+#define SM501_RAW_IRQ_CLEAR (0x000028)
+#define SM501_IRQ_STATUS (0x00002C)
+#define SM501_IRQ_MASK (0x000030)
+#define SM501_DEBUG_CONTROL (0x000034)
+
+/* power management */
+#define SM501_CURRENT_GATE (0x000038)
+#define SM501_CURRENT_CLOCK (0x00003C)
+#define SM501_POWER_MODE_0_GATE (0x000040)
+#define SM501_POWER_MODE_0_CLOCK (0x000044)
+#define SM501_POWER_MODE_1_GATE (0x000048)
+#define SM501_POWER_MODE_1_CLOCK (0x00004C)
+#define SM501_SLEEP_MODE_GATE (0x000050)
+#define SM501_POWER_MODE_CONTROL (0x000054)
+
+/* power gates for units within the 501 */
+#define SM501_GATE_HOST (0)
+#define SM501_GATE_MEMORY (1)
+#define SM501_GATE_DISPLAY (2)
+#define SM501_GATE_2D_ENGINE (3)
+#define SM501_GATE_CSC (4)
+#define SM501_GATE_ZVPORT (5)
+#define SM501_GATE_GPIO (6)
+#define SM501_GATE_UART0 (7)
+#define SM501_GATE_UART1 (8)
+#define SM501_GATE_SSP (10)
+#define SM501_GATE_USB_HOST (11)
+#define SM501_GATE_USB_GADGET (12)
+#define SM501_GATE_UCONTROLLER (17)
+#define SM501_GATE_AC97 (18)
+
+/* panel clock */
+#define SM501_CLOCK_P2XCLK (24)
+/* crt clock */
+#define SM501_CLOCK_V2XCLK (16)
+/* main clock */
+#define SM501_CLOCK_MCLK (8)
+/* SDRAM controller clock */
+#define SM501_CLOCK_M1XCLK (0)
+
+/* config 2 */
+#define SM501_PCI_MASTER_BASE (0x000058)
+#define SM501_ENDIAN_CONTROL (0x00005C)
+#define SM501_DEVICEID (0x000060)
+/* 0x050100A0 */
+
+#define SM501_PLLCLOCK_COUNT (0x000064)
+#define SM501_MISC_TIMING (0x000068)
+#define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
+
+/* GPIO base */
+#define SM501_GPIO (0x010000)
+#define SM501_GPIO_DATA_LOW (0x00)
+#define SM501_GPIO_DATA_HIGH (0x04)
+#define SM501_GPIO_DDR_LOW (0x08)
+#define SM501_GPIO_DDR_HIGH (0x0C)
+#define SM501_GPIO_IRQ_SETUP (0x10)
+#define SM501_GPIO_IRQ_STATUS (0x14)
+#define SM501_GPIO_IRQ_RESET (0x14)
+
+/* I2C controller base */
+#define SM501_I2C (0x010040)
+#define SM501_I2C_BYTE_COUNT (0x00)
+#define SM501_I2C_CONTROL (0x01)
+#define SM501_I2C_STATUS (0x02)
+#define SM501_I2C_RESET (0x02)
+#define SM501_I2C_SLAVE_ADDRESS (0x03)
+#define SM501_I2C_DATA (0x04)
+
+/* SSP base */
+#define SM501_SSP (0x020000)
+
+/* Uart 0 base */
+#define SM501_UART0 (0x030000)
+
+/* Uart 1 base */
+#define SM501_UART1 (0x030020)
+
+/* USB host port base */
+#define SM501_USB_HOST (0x040000)
+
+/* USB slave/gadget base */
+#define SM501_USB_GADGET (0x060000)
+
+/* USB slave/gadget data port base */
+#define SM501_USB_GADGET_DATA (0x070000)
+
+/* Display contoller/video engine base */
+#define SM501_DC (0x080000)
+
+/* common defines for the SM501 address registers */
+#define SM501_ADDR_FLIP (1<<31)
+#define SM501_ADDR_EXT (1<<27)
+#define SM501_ADDR_CS1 (1<<26)
+#define SM501_ADDR_MASK (0x3f << 26)
+
+#define SM501_FIFO_MASK (0x3 << 16)
+#define SM501_FIFO_1 (0x0 << 16)
+#define SM501_FIFO_3 (0x1 << 16)
+#define SM501_FIFO_7 (0x2 << 16)
+#define SM501_FIFO_11 (0x3 << 16)
+
+/* common registers for panel and the crt */
+#define SM501_OFF_DC_H_TOT (0x000)
+#define SM501_OFF_DC_V_TOT (0x008)
+#define SM501_OFF_DC_H_SYNC (0x004)
+#define SM501_OFF_DC_V_SYNC (0x00C)
+
+#define SM501_DC_PANEL_CONTROL (0x000)
+
+#define SM501_DC_PANEL_CONTROL_FPEN (1<<27)
+#define SM501_DC_PANEL_CONTROL_BIAS (1<<26)
+#define SM501_DC_PANEL_CONTROL_DATA (1<<25)
+#define SM501_DC_PANEL_CONTROL_VDD (1<<24)
+#define SM501_DC_PANEL_CONTROL_DP (1<<23)
+
+#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21)
+
+#define SM501_DC_PANEL_CONTROL_DE (1<<20)
+
+#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
+
+#define SM501_DC_PANEL_CONTROL_CP (1<<14)
+#define SM501_DC_PANEL_CONTROL_VSP (1<<13)
+#define SM501_DC_PANEL_CONTROL_HSP (1<<12)
+#define SM501_DC_PANEL_CONTROL_CK (1<<9)
+#define SM501_DC_PANEL_CONTROL_TE (1<<8)
+#define SM501_DC_PANEL_CONTROL_VPD (1<<7)
+#define SM501_DC_PANEL_CONTROL_VP (1<<6)
+#define SM501_DC_PANEL_CONTROL_HPD (1<<5)
+#define SM501_DC_PANEL_CONTROL_HP (1<<4)
+#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3)
+#define SM501_DC_PANEL_CONTROL_EN (1<<2)
+
+#define SM501_DC_PANEL_CONTROL_8BPP (0<<0)
+#define SM501_DC_PANEL_CONTROL_16BPP (1<<0)
+#define SM501_DC_PANEL_CONTROL_32BPP (2<<0)
+
+
+#define SM501_DC_PANEL_PANNING_CONTROL (0x004)
+#define SM501_DC_PANEL_COLOR_KEY (0x008)
+#define SM501_DC_PANEL_FB_ADDR (0x00C)
+#define SM501_DC_PANEL_FB_OFFSET (0x010)
+#define SM501_DC_PANEL_FB_WIDTH (0x014)
+#define SM501_DC_PANEL_FB_HEIGHT (0x018)
+#define SM501_DC_PANEL_TL_LOC (0x01C)
+#define SM501_DC_PANEL_BR_LOC (0x020)
+#define SM501_DC_PANEL_H_TOT (0x024)
+#define SM501_DC_PANEL_H_SYNC (0x028)
+#define SM501_DC_PANEL_V_TOT (0x02C)
+#define SM501_DC_PANEL_V_SYNC (0x030)
+#define SM501_DC_PANEL_CUR_LINE (0x034)
+
+#define SM501_DC_VIDEO_CONTROL (0x040)
+#define SM501_DC_VIDEO_FB0_ADDR (0x044)
+#define SM501_DC_VIDEO_FB_WIDTH (0x048)
+#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C)
+#define SM501_DC_VIDEO_TL_LOC (0x050)
+#define SM501_DC_VIDEO_BR_LOC (0x054)
+#define SM501_DC_VIDEO_SCALE (0x058)
+#define SM501_DC_VIDEO_INIT_SCALE (0x05C)
+#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060)
+#define SM501_DC_VIDEO_FB1_ADDR (0x064)
+#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068)
+
+#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080)
+#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084)
+#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088)
+#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C)
+#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090)
+#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094)
+#define SM501_DC_VIDEO_ALPHA_SCALE (0x098)
+#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C)
+#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0)
+#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4)
+
+#define SM501_DC_PANEL_HWC_BASE (0x0F0)
+#define SM501_DC_PANEL_HWC_ADDR (0x0F0)
+#define SM501_DC_PANEL_HWC_LOC (0x0F4)
+#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8)
+#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC)
+
+#define SM501_HWC_EN (1<<31)
+
+#define SM501_OFF_HWC_ADDR (0x00)
+#define SM501_OFF_HWC_LOC (0x04)
+#define SM501_OFF_HWC_COLOR_1_2 (0x08)
+#define SM501_OFF_HWC_COLOR_3 (0x0C)
+
+#define SM501_DC_ALPHA_CONTROL (0x100)
+#define SM501_DC_ALPHA_FB_ADDR (0x104)
+#define SM501_DC_ALPHA_FB_OFFSET (0x108)
+#define SM501_DC_ALPHA_TL_LOC (0x10C)
+#define SM501_DC_ALPHA_BR_LOC (0x110)
+#define SM501_DC_ALPHA_CHROMA_KEY (0x114)
+#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118)
+
+#define SM501_DC_CRT_CONTROL (0x200)
+
+#define SM501_DC_CRT_CONTROL_TVP (1<<15)
+#define SM501_DC_CRT_CONTROL_CP (1<<14)
+#define SM501_DC_CRT_CONTROL_VSP (1<<13)
+#define SM501_DC_CRT_CONTROL_HSP (1<<12)
+#define SM501_DC_CRT_CONTROL_VS (1<<11)
+#define SM501_DC_CRT_CONTROL_BLANK (1<<10)
+#define SM501_DC_CRT_CONTROL_SEL (1<<9)
+#define SM501_DC_CRT_CONTROL_TE (1<<8)
+#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
+#define SM501_DC_CRT_CONTROL_GAMMA (1<<3)
+#define SM501_DC_CRT_CONTROL_ENABLE (1<<2)
+
+#define SM501_DC_CRT_CONTROL_8BPP (0<<0)
+#define SM501_DC_CRT_CONTROL_16BPP (1<<0)
+#define SM501_DC_CRT_CONTROL_32BPP (2<<0)
+
+#define SM501_DC_CRT_FB_ADDR (0x204)
+#define SM501_DC_CRT_FB_OFFSET (0x208)
+#define SM501_DC_CRT_H_TOT (0x20C)
+#define SM501_DC_CRT_H_SYNC (0x210)
+#define SM501_DC_CRT_V_TOT (0x214)
+#define SM501_DC_CRT_V_SYNC (0x218)
+#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C)
+#define SM501_DC_CRT_CUR_LINE (0x220)
+#define SM501_DC_CRT_MONITOR_DETECT (0x224)
+
+#define SM501_DC_CRT_HWC_BASE (0x230)
+#define SM501_DC_CRT_HWC_ADDR (0x230)
+#define SM501_DC_CRT_HWC_LOC (0x234)
+#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238)
+#define SM501_DC_CRT_HWC_COLOR_3 (0x23C)
+
+#define SM501_DC_PANEL_PALETTE (0x400)
+
+#define SM501_DC_VIDEO_PALETTE (0x800)
+
+#define SM501_DC_CRT_PALETTE (0xC00)
+
+/* Zoom Video port base */
+#define SM501_ZVPORT (0x090000)
+
+/* AC97/I2S base */
+#define SM501_AC97 (0x0A0000)
+
+/* 8051 micro controller base */
+#define SM501_UCONTROLLER (0x0B0000)
+
+/* 8051 micro controller SRAM base */
+#define SM501_UCONTROLLER_SRAM (0x0C0000)
+
+/* DMA base */
+#define SM501_DMA (0x0D0000)
+
+/* 2d engine base */
+#define SM501_2D_ENGINE (0x100000)
+#define SM501_2D_SOURCE (0x00)
+#define SM501_2D_DESTINATION (0x04)
+#define SM501_2D_DIMENSION (0x08)
+#define SM501_2D_CONTROL (0x0C)
+#define SM501_2D_PITCH (0x10)
+#define SM501_2D_FOREGROUND (0x14)
+#define SM501_2D_BACKGROUND (0x18)
+#define SM501_2D_STRETCH (0x1C)
+#define SM501_2D_COLOR_COMPARE (0x20)
+#define SM501_2D_COLOR_COMPARE_MASK (0x24)
+#define SM501_2D_MASK (0x28)
+#define SM501_2D_CLIP_TL (0x2C)
+#define SM501_2D_CLIP_BR (0x30)
+#define SM501_2D_MONO_PATTERN_LOW (0x34)
+#define SM501_2D_MONO_PATTERN_HIGH (0x38)
+#define SM501_2D_WINDOW_WIDTH (0x3C)
+#define SM501_2D_SOURCE_BASE (0x40)
+#define SM501_2D_DESTINATION_BASE (0x44)
+#define SM501_2D_ALPHA (0x48)
+#define SM501_2D_WRAP (0x4C)
+#define SM501_2D_STATUS (0x50)
+
+#define SM501_CSC_Y_SOURCE_BASE (0xC8)
+#define SM501_CSC_CONSTANTS (0xCC)
+#define SM501_CSC_Y_SOURCE_X (0xD0)
+#define SM501_CSC_Y_SOURCE_Y (0xD4)
+#define SM501_CSC_U_SOURCE_BASE (0xD8)
+#define SM501_CSC_V_SOURCE_BASE (0xDC)
+#define SM501_CSC_SOURCE_DIMENSION (0xE0)
+#define SM501_CSC_SOURCE_PITCH (0xE4)
+#define SM501_CSC_DESTINATION (0xE8)
+#define SM501_CSC_DESTINATION_DIMENSION (0xEC)
+#define SM501_CSC_DESTINATION_PITCH (0xF0)
+#define SM501_CSC_SCALE_FACTOR (0xF4)
+#define SM501_CSC_DESTINATION_BASE (0xF8)
+#define SM501_CSC_CONTROL (0xFC)
+
+/* 2d engine data port base */
+#define SM501_2D_ENGINE_DATA (0x110000)
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
new file mode 100644
index 0000000..9e3aaad
--- /dev/null
+++ b/include/linux/sm501.h
@@ -0,0 +1,170 @@
+/* include/linux/sm501.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+extern int sm501_unit_power(struct device *dev,
+ unsigned int unit, unsigned int to);
+
+extern unsigned long sm501_set_clock(struct device *dev,
+ int clksrc, unsigned long freq);
+
+extern unsigned long sm501_find_clock(int clksrc, unsigned long req_freq);
+
+/* sm501_misc_control
+ *
+ * Modify the SM501's MISC_CONTROL register
+*/
+
+extern int sm501_misc_control(struct device *dev,
+ unsigned long set, unsigned long clear);
+
+/* sm501_modify_reg
+ *
+ * Modify a register in the SM501 which may be shared with other
+ * drivers.
+*/
+
+extern unsigned long sm501_modify_reg(struct device *dev,
+ unsigned long reg,
+ unsigned long set,
+ unsigned long clear);
+
+/* sm501_gpio_set
+ *
+ * set the state of the given GPIO line
+*/
+
+extern void sm501_gpio_set(struct device *dev,
+ unsigned long gpio,
+ unsigned int to,
+ unsigned int dir);
+
+/* sm501_gpio_get
+ *
+ * get the state of the given GPIO line
+*/
+
+extern unsigned long sm501_gpio_get(struct device *dev,
+ unsigned long gpio);
+
+
+/* Platform data definitions */
+
+#define SM501FB_FLAG_USE_INIT_MODE (1<<0)
+#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1)
+#define SM501FB_FLAG_USE_HWCURSOR (1<<2)
+#define SM501FB_FLAG_USE_HWACCEL (1<<3)
+
+struct sm501_platdata_fbsub {
+ struct fb_videomode *def_mode;
+ unsigned int def_bpp;
+ unsigned long max_mem;
+ unsigned int flags;
+};
+
+enum sm501_fb_routing {
+ SM501_FB_OWN = 0, /* CRT=>CRT, Panel=>Panel */
+ SM501_FB_CRT_PANEL = 1, /* Panel=>CRT, Panel=>Panel */
+};
+
+/* sm501_platdata_fb flag field bit definitions */
+
+#define SM501_FBPD_SWAP_FB_ENDIAN (1<<0) /* need to endian swap */
+
+/* sm501_platdata_fb
+ *
+ * configuration data for the framebuffer driver
+*/
+
+struct sm501_platdata_fb {
+ enum sm501_fb_routing fb_route;
+ unsigned int flags;
+ struct sm501_platdata_fbsub *fb_crt;
+ struct sm501_platdata_fbsub *fb_pnl;
+};
+
+/* gpio i2c */
+
+struct sm501_platdata_gpio_i2c {
+ unsigned int pin_sda;
+ unsigned int pin_scl;
+};
+
+/* sm501_initdata
+ *
+ * use for initialising values that may not have been setup
+ * before the driver is loaded.
+*/
+
+struct sm501_reg_init {
+ unsigned long set;
+ unsigned long mask;
+};
+
+#define SM501_USE_USB_HOST (1<<0)
+#define SM501_USE_USB_SLAVE (1<<1)
+#define SM501_USE_SSP0 (1<<2)
+#define SM501_USE_SSP1 (1<<3)
+#define SM501_USE_UART0 (1<<4)
+#define SM501_USE_UART1 (1<<5)
+#define SM501_USE_FBACCEL (1<<6)
+#define SM501_USE_AC97 (1<<7)
+#define SM501_USE_I2S (1<<8)
+
+#define SM501_USE_ALL (0xffffffff)
+
+struct sm501_initdata {
+ struct sm501_reg_init gpio_low;
+ struct sm501_reg_init gpio_high;
+ struct sm501_reg_init misc_timing;
+ struct sm501_reg_init misc_control;
+
+ unsigned long devices;
+ unsigned long mclk; /* non-zero to modify */
+ unsigned long m1xclk; /* non-zero to modify */
+};
+
+/* sm501_init_gpio
+ *
+ * default gpio settings
+*/
+
+struct sm501_init_gpio {
+ struct sm501_reg_init gpio_data_low;
+ struct sm501_reg_init gpio_data_high;
+ struct sm501_reg_init gpio_ddr_low;
+ struct sm501_reg_init gpio_ddr_high;
+};
+
+/* sm501_platdata
+ *
+ * This is passed with the platform device to allow the board
+ * to control the behaviour of the SM501 driver(s) which attach
+ * to the device.
+ *
+*/
+
+struct sm501_platdata {
+ struct sm501_initdata *init;
+ struct sm501_init_gpio *init_gpiop;
+ struct sm501_platdata_fb *fb;
+
+ struct sm501_platdata_gpio_i2c *gpio_i2c;
+ unsigned int gpio_i2c_nr;
+};