Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index 91931dc..4aaadc7 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -215,7 +215,7 @@
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index a5f0174..e064bb3 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -147,8 +147,8 @@
if (!otg_mode_host)
mxc_register_device(&otg_udc_device, &otg_device_pdata);
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
- eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+ eukrea_mbimxsd25_baseboard_init();
#endif
}
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index d3af0fd..7a62e74 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -155,7 +155,7 @@
aad = &clk_consumer[(pdr0 >> 16) & 0xf];
if (aad->sel)
- fref = fref * 2 / 3;
+ fref = fref * 3 / 4;
return fref / aad->arm;
}
@@ -164,7 +164,7 @@
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
struct arm_ahb_div *aad;
- unsigned long fref = get_rate_mpll();
+ unsigned long fref = get_rate_arm();
aad = &clk_consumer[(pdr0 >> 16) & 0xf];
@@ -176,16 +176,11 @@
return get_rate_ahb(NULL) >> 1;
}
-static unsigned long get_3_3_div(unsigned long in)
-{
- return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
-}
-
static unsigned long get_rate_uart(struct clk *clk)
{
unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
- unsigned long div = get_3_3_div(pdr4 >> 10);
+ unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
if (pdr3 & (1 << 14))
return get_rate_arm() / div;
@@ -216,7 +211,7 @@
break;
}
- return rate / get_3_3_div(div);
+ return rate / (div + 1);
}
static unsigned long get_rate_mshc(struct clk *clk)
@@ -270,7 +265,7 @@
else
rate = get_rate_ppll();
- return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+ return rate / (((pdr2 >> 16) & 0x3f) + 1);
}
static unsigned long get_rate_otg(struct clk *clk)
@@ -283,25 +278,51 @@
else
rate = get_rate_ppll();
- return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+ return rate / (((pdr4 >> 22) & 0x3f) + 1);
}
static unsigned long get_rate_ipg_per(struct clk *clk)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
- unsigned long div1, div2;
+ unsigned long div;
if (pdr0 & (1 << 26)) {
- div1 = (pdr4 >> 19) & 0x7;
- div2 = (pdr4 >> 16) & 0x7;
- return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+ div = (pdr4 >> 16) & 0x3f;
+ return get_rate_arm() / (div + 1);
} else {
- div1 = (pdr0 >> 12) & 0x7;
- return get_rate_ahb(NULL) / div1;
+ div = (pdr0 >> 12) & 0x7;
+ return get_rate_ahb(NULL) / (div + 1);
}
}
+static unsigned long get_rate_hsp(struct clk *clk)
+{
+ unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+ unsigned long fref = get_rate_mpll();
+
+ if (fref > 400 * 1000 * 1000) {
+ switch (hsp_podf) {
+ case 0:
+ return fref >> 2;
+ case 1:
+ return fref >> 3;
+ case 2:
+ return fref / 3;
+ }
+ } else {
+ switch (hsp_podf) {
+ case 0:
+ case 2:
+ return fref / 3;
+ case 1:
+ return fref / 6;
+ }
+ }
+
+ return 0;
+}
+
static int clk_cgr_enable(struct clk *clk)
{
u32 reg;
@@ -359,7 +380,7 @@
DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_ahb, NULL);
+DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL);
DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL);
DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL);
DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL);
@@ -485,10 +506,10 @@
int __init mx35_clocks_init()
{
- unsigned int ll = 0;
+ unsigned int cgr2 = 3 << 26, cgr3 = 0;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- ll = (3 << 16);
+ cgr2 |= 3 << 16;
#endif
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@@ -499,8 +520,20 @@
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
- __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
- __raw_writel(0, CCM_BASE + CCM_CGR3);
+
+ /*
+ * Check if we came up in internal boot mode. If yes, we need some
+ * extra clocks turned on, otherwise the MX35 boot ROM code will
+ * hang after a watchdog reset.
+ */
+ if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
+ /* Additionally turn on UART1, SCC, and IIM clocks */
+ cgr2 |= 3 << 16 | 3 << 4;
+ cgr3 |= 3 << 2;
+ }
+
+ __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+ __raw_writel(cgr3, CCM_BASE + CCM_CGR3);
mxc_timer_init(&gpt_clk,
MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 1dc5004..f8f15e3 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -216,7 +216,7 @@
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd35_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 9770a6a..2a4f8b7 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -201,8 +201,8 @@
if (!otg_mode_host)
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
- eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+ eukrea_mbimxsd35_baseboard_init();
#endif
}
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 6af69de..57c10a9 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -56,7 +56,7 @@
{
u32 reg;
reg = __raw_readl(clk->enable_reg);
- reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
__raw_writel(reg, clk->enable_reg);
}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0527e65..6785db4 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -43,6 +43,7 @@
config ARCH_MX5
bool "MX5-based"
select CPU_V7
+ select ARM_L1_CACHE_SHIFT_6
help
This enables support for systems based on the Freescale i.MX51 family
diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
index 634e3f4..656acb4 100644
--- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -37,9 +37,9 @@
* mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
*/
-extern void eukrea_mbimx25_baseboard_init(void);
+extern void eukrea_mbimxsd25_baseboard_init(void);
extern void eukrea_mbimx27_baseboard_init(void);
-extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
extern void eukrea_mbimx51_baseboard_init(void);
#endif
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index b3da9aa..3703ab2 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -164,8 +164,9 @@
return -EAGAIN;
for (i = 0; i < 4; i++) {
- v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
- __raw_writel(v, TZIC_WAKEUP0(i));
+ v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
+ wakeup_intr[i];
+ __raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
}
return 0;