pcmcia: use pcmcia_loop_config in net pcmcia drivers
Use the config loop helper in (some) net pcmcia drivers.
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2d4c4ad..7a9eeca 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -512,58 +512,53 @@
}
}
+static int pcnet_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ void *priv_data)
+{
+ int *has_shmem = priv_data;
+ int i;
+ cistpl_io_t *io = &cfg->io;
+
+ if (cfg->index == 0 || cfg->io.nwin == 0)
+ return -EINVAL;
+
+ p_dev->conf.ConfigIndex = cfg->index;
+
+ /* For multifunction cards, by convention, we configure the
+ network function with window 0, and serial with window 1 */
+ if (io->nwin > 1) {
+ i = (io->win[1].len > io->win[0].len);
+ p_dev->io.BasePort2 = io->win[1-i].base;
+ p_dev->io.NumPorts2 = io->win[1-i].len;
+ } else {
+ i = p_dev->io.NumPorts2 = 0;
+ }
+
+ *has_shmem = ((cfg->mem.nwin == 1) &&
+ (cfg->mem.win[0].len >= 0x4000));
+ p_dev->io.BasePort1 = io->win[i].base;
+ p_dev->io.NumPorts1 = io->win[i].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ return try_io_port(p_dev);
+
+ return 0;
+}
+
static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
+ int last_ret, last_fn, start_pg, stop_pg, cm_offset;
int has_shmem = 0;
- u_short buf[64];
hw_info_t *local_hw_info;
DECLARE_MAC_BUF(mac);
DEBUG(0, "pcnet_config(0x%p)\n", link);
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (last_ret == CS_SUCCESS) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_io_t *io = &(parse.cftable_entry.io);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
- cfg->index == 0 || cfg->io.nwin == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- link->io.BasePort2 = io->win[1-i].base;
- link->io.NumPorts2 = io->win[1-i].len;
- } else {
- i = link->io.NumPorts2 = 0;
- }
- has_shmem = ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000));
- link->io.BasePort1 = io->win[i].base;
- link->io.NumPorts1 = io->win[i].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
- last_ret = try_io_port(link);
- if (last_ret == CS_SUCCESS) break;
- }
- next_entry:
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
- if (last_ret != CS_SUCCESS) {
+ last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
+ if (last_ret) {
cs_error(link, RequestIO, last_ret);
goto failed;
}