V4L/DVB (7645): Add support for the Hauppauge HVR-1200
This adds support for DVB-T mode only, analog mode is not supported.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 0924e6e..3e9e999 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -5,3 +5,4 @@
4 -> DViCO FusionHDTV5 Express [18ac:d500]
5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797]
6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717]
+ 7 -> Hauppauge WinTV-HVR1200 [0070:71d1]
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 1fd326f..ca5fbce 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -8,6 +8,7 @@
select VIDEO_TVEEPROM
select VIDEO_IR
select VIDEOBUF_DVB
+ select VIDEO_CX25840
select DVB_TUNER_MT2131 if !DVB_FE_CUSTOMISE
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
@@ -16,6 +17,7 @@
select TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
select DVB_TDA18271 if !DVB_FE_CUSTOMIZE
select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
+ select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Conexant 23885 based
TV cards.
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 77cd452..8cb32f3 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -130,6 +130,10 @@
.name = "Hauppauge WinTV-HVR1500",
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
+ .name = "Hauppauge WinTV-HVR1200",
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -181,6 +185,10 @@
.subvendor = 0x0070,
.subdevice = 0x7717,
.card = CX23885_BOARD_HAUPPAUGE_HVR1500,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x71d1,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1200,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -314,6 +322,17 @@
cx_set(GP0_IO, 0x00040004);
mdelay(20);
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
+ /* GPIO-0 tda10048 demodulator reset */
+ /* GPIO-2 tda18271 tuner reset */
+
+ /* Put the parts into reset and back */
+ cx_set(GP0_IO, 0x00050000);
+ mdelay(20);
+ cx_clear(GP0_IO, 0x00000005);
+ mdelay(20);
+ cx_set(GP0_IO, 0x00050005);
+ break;
}
}
@@ -324,6 +343,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
/* FIXME: Implement me */
break;
}
@@ -353,6 +373,7 @@
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
@@ -369,6 +390,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 1a720ab..18cd90c 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -36,6 +36,7 @@
#include "tda18271.h"
#include "lgdt330x.h"
#include "xc5000.h"
+#include "tda10048.h"
#include "dvb-pll.h"
#include "tuner-xc2028.h"
#include "tuner-xc2028-types.h"
@@ -107,6 +108,13 @@
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
+static struct tda10048_config hauppauge_hvr1200_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON
+};
+
static struct s5h1409_config hauppauge_ezqam_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
@@ -178,6 +186,10 @@
.gate = TDA18271_GATE_ANALOG,
};
+static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+ .gate = TDA18271_GATE_ANALOG,
+};
+
static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
{
struct cx23885_tsport *port = ptr;
@@ -317,6 +329,20 @@
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
+ i2c_bus = &dev->i2c_bus[0];
+ port->dvb.frontend = dvb_attach(tda10048_attach,
+ &hauppauge_hvr1200_config,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, port->dvb.frontend,
+ &dev->i2c_bus[1].i2c_adap, 0x42,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, port->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_hvr1200_tuner_config);
+ }
+ break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index 8773a1f..85f9d5e 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -353,6 +353,7 @@
};
static char *i2c_devs[128] = {
+ [0x10 >> 1] = "tda10048",
[ 0x1c >> 1 ] = "lgdt3303",
[ 0x86 >> 1 ] = "tda9887",
[ 0x32 >> 1 ] = "cx24227",
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 7cb2179..5bbfe6f 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -59,6 +59,7 @@
#define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4
#define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5
#define CX23885_BOARD_HAUPPAUGE_HVR1500 6
+#define CX23885_BOARD_HAUPPAUGE_HVR1200 7
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\