diff --git a/include/sound/wm8955.h b/include/sound/wm8955.h
new file mode 100644
index 0000000..5074ef4
--- /dev/null
+++ b/include/sound/wm8955.h
@@ -0,0 +1,26 @@
+/*
+ * Platform data for WM8955
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __WM8955_PDATA_H__
+#define __WM8955_PDATA_H__
+
+struct wm8955_pdata {
+	/* Configure LOUT2/ROUT2 to drive a speaker */
+	unsigned int out2_speaker:1;
+
+	/* Configure MONOIN+/- in differential mode */
+	unsigned int monoin_diff:1;
+};
+
+#endif
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 691abe7..62ff26a 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -52,6 +52,7 @@
 	select SND_SOC_WM8903 if I2C
 	select SND_SOC_WM8904 if I2C
 	select SND_SOC_WM8940 if I2C
+	select SND_SOC_WM8955 if I2C
 	select SND_SOC_WM8960 if I2C
 	select SND_SOC_WM8961 if I2C
 	select SND_SOC_WM8971 if I2C
@@ -214,6 +215,9 @@
 config SND_SOC_WM8940
         tristate
 
+config SND_SOC_WM8955
+	tristate
+
 config SND_SOC_WM8960
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index c0fd3c8..ea98354 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -39,6 +39,7 @@
 snd-soc-wm8903-objs := wm8903.o
 snd-soc-wm8904-objs := wm8904.o
 snd-soc-wm8940-objs := wm8940.o
+snd-soc-wm8955-objs := wm8955.o
 snd-soc-wm8960-objs := wm8960.o
 snd-soc-wm8961-objs := wm8961.o
 snd-soc-wm8971-objs := wm8971.o
@@ -97,6 +98,7 @@
 obj-$(CONFIG_SND_SOC_WM8903)	+= snd-soc-wm8903.o
 obj-$(CONFIG_SND_SOC_WM8904)	+= snd-soc-wm8904.o
 obj-$(CONFIG_SND_SOC_WM8940)	+= snd-soc-wm8940.o
+obj-$(CONFIG_SND_SOC_WM8955)	+= snd-soc-wm8955.o
 obj-$(CONFIG_SND_SOC_WM8960)	+= snd-soc-wm8960.o
 obj-$(CONFIG_SND_SOC_WM8961)	+= snd-soc-wm8961.o
 obj-$(CONFIG_SND_SOC_WM8971)	+= snd-soc-wm8971.o
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
new file mode 100644
index 0000000..615dab2
--- /dev/null
+++ b/sound/soc/codecs/wm8955.c
@@ -0,0 +1,1151 @@
+/*
+ * wm8955.c  --  WM8955 ALSA SoC Audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/wm8955.h>
+
+#include "wm8955.h"
+
+static struct snd_soc_codec *wm8955_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8955;
+
+#define WM8955_NUM_SUPPLIES 4
+static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = {
+	"DCVDD",
+	"DBVDD",
+	"HPVDD",
+	"AVDD",
+};
+
+/* codec private data */
+struct wm8955_priv {
+	struct snd_soc_codec codec;
+	u16 reg_cache[WM8955_MAX_REGISTER + 1];
+
+	unsigned int mclk_rate;
+
+	int deemph;
+	int fs;
+
+	struct regulator_bulk_data supplies[WM8955_NUM_SUPPLIES];
+
+	struct wm8955_pdata *pdata;
+};
+
+static const u16 wm8955_reg[WM8955_MAX_REGISTER + 1] = {
+	0x0000,     /* R0 */
+	0x0000,     /* R1 */
+	0x0079,     /* R2  - LOUT1 volume */
+	0x0079,     /* R3  - ROUT1 volume */
+	0x0000,     /* R4 */
+	0x0008,     /* R5  - DAC Control */
+	0x0000,     /* R6 */
+	0x000A,     /* R7  - Audio Interface */
+	0x0000,     /* R8  - Sample Rate */
+	0x0000,     /* R9 */
+	0x00FF,     /* R10 - Left DAC volume */
+	0x00FF,     /* R11 - Right DAC volume */
+	0x000F,     /* R12 - Bass control */
+	0x000F,     /* R13 - Treble control */
+	0x0000,     /* R14 */
+	0x0000,     /* R15 - Reset */
+	0x0000,     /* R16 */
+	0x0000,     /* R17 */
+	0x0000,     /* R18 */
+	0x0000,     /* R19 */
+	0x0000,     /* R20 */
+	0x0000,     /* R21 */
+	0x0000,     /* R22 */
+	0x00C1,     /* R23 - Additional control (1) */
+	0x0000,     /* R24 - Additional control (2) */
+	0x0000,     /* R25 - Power Management (1) */
+	0x0000,     /* R26 - Power Management (2) */
+	0x0000,     /* R27 - Additional Control (3) */
+	0x0000,     /* R28 */
+	0x0000,     /* R29 */
+	0x0000,     /* R30 */
+	0x0000,     /* R31 */
+	0x0000,     /* R32 */
+	0x0000,     /* R33 */
+	0x0050,     /* R34 - Left out Mix (1) */
+	0x0050,     /* R35 - Left out Mix (2) */
+	0x0050,     /* R36 - Right out Mix (1) */
+	0x0050,     /* R37 - Right Out Mix (2) */
+	0x0050,     /* R38 - Mono out Mix (1) */
+	0x0050,     /* R39 - Mono out Mix (2) */
+	0x0079,     /* R40 - LOUT2 volume */
+	0x0079,     /* R41 - ROUT2 volume */
+	0x0079,     /* R42 - MONOOUT volume */
+	0x0000,     /* R43 - Clocking / PLL */
+	0x0103,     /* R44 - PLL Control 1 */
+	0x0024,     /* R45 - PLL Control 2 */
+	0x01BA,     /* R46 - PLL Control 3 */
+	0x0000,     /* R47 */
+	0x0000,     /* R48 */
+	0x0000,     /* R49 */
+	0x0000,     /* R50 */
+	0x0000,     /* R51 */
+	0x0000,     /* R52 */
+	0x0000,     /* R53 */
+	0x0000,     /* R54 */
+	0x0000,     /* R55 */
+	0x0000,     /* R56 */
+	0x0000,     /* R57 */
+	0x0000,     /* R58 */
+	0x0000,     /* R59 - PLL Control 4 */
+};
+
+static int wm8955_reset(struct snd_soc_codec *codec)
+{
+	return snd_soc_write(codec, WM8955_RESET, 0);
+}
+
+struct pll_factors {
+	int n;
+	int k;
+	int outdiv;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 22) * 10)
+
+static int wm8995_pll_factors(struct device *dev,
+			      int Fref, int Fout, struct pll_factors *pll)
+{
+	u64 Kpart;
+	unsigned int K, Ndiv, Nmod, target;
+
+	dev_dbg(dev, "Fref=%u Fout=%u\n", Fref, Fout);
+
+	/* The oscilator should run at should be 90-100MHz, and
+	 * there's a divide by 4 plus an optional divide by 2 in the
+	 * output path to generate the system clock.  The clock table
+	 * is sortd so we should always generate a suitable target. */
+	target = Fout * 4;
+	if (target < 90000000) {
+		pll->outdiv = 1;
+		target *= 2;
+	} else {
+		pll->outdiv = 0;
+	}
+
+	WARN_ON(target < 90000000 || target > 100000000);
+
+	dev_dbg(dev, "Fvco=%dHz\n", target);
+
+	/* Now, calculate N.K */
+	Ndiv = target / Fref;
+
+	pll->n = Ndiv;
+	Nmod = target % Fref;
+	dev_dbg(dev, "Nmod=%d\n", Nmod);
+
+	/* Calculate fractional part - scale up so we can round. */
+	Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, Fref);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	pll->k = K / 10;
+
+	dev_dbg(dev, "N=%x K=%x OUTDIV=%x\n", pll->n, pll->k, pll->outdiv);
+
+	return 0;
+}
+
+/* Lookup table specifiying SRATE (table 25 in datasheet); some of the
+ * output frequencies have been rounded to the standard frequencies
+ * they are intended to match where the error is slight. */
+static struct {
+	int mclk;
+	int fs;
+	int usb;
+	int sr;
+} clock_cfgs[] = {
+	{ 18432000,  8000, 0,  3, },
+	{ 18432000, 12000, 0,  9, },
+	{ 18432000, 16000, 0, 11, },
+	{ 18432000, 24000, 0, 29, },
+	{ 18432000, 32000, 0, 13, },
+	{ 18432000, 48000, 0,  1, },
+	{ 18432000, 96000, 0, 15, },
+
+	{ 16934400,  8018, 0, 19, },
+	{ 16934400, 11025, 0, 25, },
+	{ 16934400, 22050, 0, 27, },
+	{ 16934400, 44100, 0, 17, },
+	{ 16934400, 88200, 0, 31, },
+
+	{ 12000000,  8000, 1,  2, },
+	{ 12000000, 11025, 1, 25, },
+	{ 12000000, 12000, 1,  8, },
+	{ 12000000, 16000, 1, 10, },
+	{ 12000000, 22050, 1, 27, },
+	{ 12000000, 24000, 1, 28, },
+	{ 12000000, 32000, 1, 12, },
+	{ 12000000, 44100, 1, 17, },
+	{ 12000000, 48000, 1,  0, },
+	{ 12000000, 88200, 1, 31, },
+	{ 12000000, 96000, 1, 14, },
+
+	{ 12288000,  8000, 0,  2, },
+	{ 12288000, 12000, 0,  8, },
+	{ 12288000, 16000, 0, 10, },
+	{ 12288000, 24000, 0, 28, },
+	{ 12288000, 32000, 0, 12, },
+	{ 12288000, 48000, 0,  0, },
+	{ 12288000, 96000, 0, 14, },
+
+	{ 12289600,  8018, 0, 18, },
+	{ 12289600, 11025, 0, 24, },
+	{ 12289600, 22050, 0, 26, },
+	{ 11289600, 44100, 0, 16, },
+	{ 11289600, 88200, 0, 31, },
+};
+
+static int wm8955_configure_clocking(struct snd_soc_codec *codec)
+{
+	struct wm8955_priv *wm8955 = codec->private_data;
+	int i, ret, val;
+	int clocking = 0;
+	int srate = 0;
+	int sr = -1;
+	struct pll_factors pll;
+
+	/* If we're not running a sample rate currently just pick one */
+	if (wm8955->fs == 0)
+		wm8955->fs = 8000;
+
+	/* Can we generate an exact output? */
+	for (i = 0; i < ARRAY_SIZE(clock_cfgs); i++) {
+		if (wm8955->fs != clock_cfgs[i].fs)
+			continue;
+		sr = i;
+
+		if (wm8955->mclk_rate == clock_cfgs[i].mclk)
+			break;
+	}
+
+	/* We should never get here with an unsupported sample rate */
+	if (sr == -1) {
+		dev_err(codec->dev, "Sample rate %dHz unsupported\n",
+			wm8955->fs);
+		WARN_ON(sr == -1);
+		return -EINVAL;
+	}
+
+	if (i == ARRAY_SIZE(clock_cfgs)) {
+		/* If we can't generate the right clock from MCLK then
+		 * we should configure the PLL to supply us with an
+		 * appropriate clock.
+		 */
+		clocking |= WM8955_MCLKSEL;
+
+		/* Use the last divider configuration we saw for the
+		 * sample rate. */
+		ret = wm8995_pll_factors(codec->dev, wm8955->mclk_rate,
+					 clock_cfgs[sr].mclk, &pll);
+		if (ret != 0) {
+			dev_err(codec->dev,
+				"Unable to generate %dHz from %dHz MCLK\n",
+				wm8955->fs, wm8955->mclk_rate);
+			return -EINVAL;
+		}
+
+		snd_soc_update_bits(codec, WM8955_PLL_CONTROL_1,
+				    WM8955_N_MASK | WM8955_K_21_18_MASK,
+				    (pll.n << WM8955_N_SHIFT) |
+				    pll.k >> 18);
+		snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
+				    WM8955_K_17_9_MASK,
+				    (pll.k >> 9) & WM8955_K_17_9_MASK);
+		snd_soc_update_bits(codec, WM8955_PLL_CONTROL_2,
+				    WM8955_K_8_0_MASK,
+				    pll.k & WM8955_K_8_0_MASK);
+		if (pll.k)
+			snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
+					    WM8955_KEN, WM8955_KEN);
+		else
+			snd_soc_update_bits(codec, WM8955_PLL_CONTROL_4,
+					    WM8955_KEN, 0);
+
+		if (pll.outdiv)
+			val = WM8955_PLL_RB | WM8955_PLLOUTDIV2;
+		else
+			val = WM8955_PLL_RB;
+
+		/* Now start the PLL running */
+		snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+				    WM8955_PLL_RB | WM8955_PLLOUTDIV2, val);
+		snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+				    WM8955_PLLEN, WM8955_PLLEN);
+	}
+
+	srate = clock_cfgs[sr].usb | (clock_cfgs[sr].sr << WM8955_SR_SHIFT);
+
+	snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
+			    WM8955_USB | WM8955_SR_MASK, srate);
+	snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+			    WM8955_MCLKSEL, clocking);
+
+	return 0;
+}
+
+static int wm8955_sysclk(struct snd_soc_dapm_widget *w,
+			 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	int ret = 0;
+
+	/* Always disable the clocks - if we're doing reconfiguration this
+	 * avoids misclocking.
+	 */
+	snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+			    WM8955_DIGENB, 0);
+	snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+			    WM8955_PLL_RB | WM8955_PLLEN, 0);
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMD:
+		break;
+	case SND_SOC_DAPM_PRE_PMU:
+		ret = wm8955_configure_clocking(codec);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int deemph_settings[] = { 0, 32000, 44100, 48000 };
+
+static int wm8955_set_deemph(struct snd_soc_codec *codec)
+{
+	struct wm8955_priv *wm8955 = codec->private_data;
+	int val, i, best;
+
+	/* If we're using deemphasis select the nearest available sample
+	 * rate.
+	 */
+	if (wm8955->deemph) {
+		best = 1;
+		for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
+			if (abs(deemph_settings[i] - wm8955->fs) <
+			    abs(deemph_settings[best] - wm8955->fs))
+				best = i;
+		}
+
+		val = best << WM8955_DEEMPH_SHIFT;
+	} else {
+		val = 0;
+	}
+
+	dev_dbg(codec->dev, "Set deemphasis %d\n", val);
+
+	return snd_soc_update_bits(codec, WM8955_DAC_CONTROL,
+				   WM8955_DEEMPH_MASK, val);
+}
+
+static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct wm8955_priv *wm8955 = codec->private_data;
+
+	return wm8955->deemph;
+}
+
+static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct wm8955_priv *wm8955 = codec->private_data;
+	int deemph = ucontrol->value.enumerated.item[0];
+
+	if (deemph > 1)
+		return -EINVAL;
+
+	wm8955->deemph = deemph;
+
+	return wm8955_set_deemph(codec);
+}
+
+static const char *bass_mode_text[] = {
+	"Linear", "Adaptive",
+};
+
+static const struct soc_enum bass_mode =
+	SOC_ENUM_SINGLE(WM8955_BASS_CONTROL, 7, 2, bass_mode_text);
+
+static const char *bass_cutoff_text[] = {
+	"Low", "High"
+};
+
+static const struct soc_enum bass_cutoff =
+	SOC_ENUM_SINGLE(WM8955_BASS_CONTROL, 6, 2, bass_cutoff_text);
+
+static const char *treble_cutoff_text[] = {
+	"High", "Low"
+};
+
+static const struct soc_enum treble_cutoff =
+	SOC_ENUM_SINGLE(WM8955_TREBLE_CONTROL, 6, 2, treble_cutoff_text);
+
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(atten_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
+static const DECLARE_TLV_DB_SCALE(mono_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+static const DECLARE_TLV_DB_SCALE(treble_tlv, -1200, 150, 1);
+
+static const struct snd_kcontrol_new wm8955_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8955_LEFT_DAC_VOLUME,
+		 WM8955_RIGHT_DAC_VOLUME, 0, 255, 0, digital_tlv),
+SOC_SINGLE_TLV("Playback Attenuation Volume", WM8955_DAC_CONTROL, 7, 1, 1,
+	       atten_tlv),
+SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
+		    wm8955_get_deemph, wm8955_put_deemph),
+
+SOC_ENUM("Bass Mode", bass_mode),
+SOC_ENUM("Bass Cutoff", bass_cutoff),
+SOC_SINGLE("Bass Volume", WM8955_BASS_CONTROL, 0, 15, 1),
+
+SOC_ENUM("Treble Cutoff", treble_cutoff),
+SOC_SINGLE_TLV("Treble Volume", WM8955_TREBLE_CONTROL, 0, 14, 1, treble_tlv),
+
+SOC_SINGLE_TLV("Left Bypass Volume", WM8955_LEFT_OUT_MIX_1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Left Mono Volume", WM8955_LEFT_OUT_MIX_2, 4, 7, 1,
+	       bypass_tlv),
+
+SOC_SINGLE_TLV("Right Mono Volume", WM8955_RIGHT_OUT_MIX_1, 4, 7, 1,
+	       bypass_tlv),
+SOC_SINGLE_TLV("Right Bypass Volume", WM8955_RIGHT_OUT_MIX_2, 4, 7, 1,
+	       bypass_tlv),
+
+/* Not a stereo pair so they line up with the DAPM switches */
+SOC_SINGLE_TLV("Mono Left Bypass Volume", WM8955_MONO_OUT_MIX_1, 4, 7, 1,
+	       mono_tlv),
+SOC_SINGLE_TLV("Mono Right Bypass Volume", WM8955_MONO_OUT_MIX_2, 4, 7, 1,
+	       mono_tlv),
+
+SOC_DOUBLE_R_TLV("Headphone Volume", WM8955_LOUT1_VOLUME,
+		 WM8955_ROUT1_VOLUME, 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8955_LOUT1_VOLUME,
+	     WM8955_ROUT1_VOLUME, 7, 1, 0),
+
+SOC_DOUBLE_R_TLV("Speaker Volume", WM8955_LOUT2_VOLUME,
+		 WM8955_ROUT2_VOLUME, 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Speaker ZC Switch", WM8955_LOUT2_VOLUME,
+	     WM8955_ROUT2_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("Mono Volume", WM8955_MONOOUT_VOLUME, 0, 127, 0, out_tlv),
+SOC_SINGLE("Mono ZC Switch", WM8955_MONOOUT_VOLUME, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new lmixer[] = {
+SOC_DAPM_SINGLE("Playback Switch", WM8955_LEFT_OUT_MIX_1, 8, 1, 0),
+SOC_DAPM_SINGLE("Bypass Switch", WM8955_LEFT_OUT_MIX_1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8955_LEFT_OUT_MIX_2, 8, 1, 0),
+SOC_DAPM_SINGLE("Mono Switch", WM8955_LEFT_OUT_MIX_2, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new rmixer[] = {
+SOC_DAPM_SINGLE("Left Playback Switch", WM8955_RIGHT_OUT_MIX_1, 8, 1, 0),
+SOC_DAPM_SINGLE("Mono Switch", WM8955_RIGHT_OUT_MIX_1, 7, 1, 0),
+SOC_DAPM_SINGLE("Playback Switch", WM8955_RIGHT_OUT_MIX_2, 8, 1, 0),
+SOC_DAPM_SINGLE("Bypass Switch", WM8955_RIGHT_OUT_MIX_2, 7, 1, 0),
+};
+
+static const struct snd_kcontrol_new mmixer[] = {
+SOC_DAPM_SINGLE("Left Playback Switch", WM8955_MONO_OUT_MIX_1, 8, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8955_MONO_OUT_MIX_1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8955_MONO_OUT_MIX_2, 8, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8955_MONO_OUT_MIX_2, 7, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8955_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("MONOIN-"),
+SND_SOC_DAPM_INPUT("MONOIN+"),
+SND_SOC_DAPM_INPUT("LINEINR"),
+SND_SOC_DAPM_INPUT("LINEINL"),
+
+SND_SOC_DAPM_PGA("Mono Input", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_SUPPLY("SYSCLK", WM8955_POWER_MANAGEMENT_1, 0, 1, wm8955_sysclk,
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("TSDEN", WM8955_ADDITIONAL_CONTROL_1, 8, 0, NULL, 0),
+
+SND_SOC_DAPM_DAC("DACL", "Playback", WM8955_POWER_MANAGEMENT_2, 8, 0),
+SND_SOC_DAPM_DAC("DACR", "Playback", WM8955_POWER_MANAGEMENT_2, 7, 0),
+
+SND_SOC_DAPM_PGA("LOUT1 PGA", WM8955_POWER_MANAGEMENT_2, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("ROUT1 PGA", WM8955_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA("LOUT2 PGA", WM8955_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
+SND_SOC_DAPM_PGA("ROUT2 PGA", WM8955_POWER_MANAGEMENT_2, 3, 0, NULL, 0),
+SND_SOC_DAPM_PGA("MOUT PGA", WM8955_POWER_MANAGEMENT_2, 2, 0, NULL, 0),
+SND_SOC_DAPM_PGA("OUT3 PGA", WM8955_POWER_MANAGEMENT_2, 1, 0, NULL, 0),
+
+/* The names are chosen to make the control names nice */
+SND_SOC_DAPM_MIXER("Left", SND_SOC_NOPM, 0, 0,
+		   lmixer, ARRAY_SIZE(lmixer)),
+SND_SOC_DAPM_MIXER("Right", SND_SOC_NOPM, 0, 0,
+		   rmixer, ARRAY_SIZE(rmixer)),
+SND_SOC_DAPM_MIXER("Mono", SND_SOC_NOPM, 0, 0,
+		   mmixer, ARRAY_SIZE(mmixer)),
+
+SND_SOC_DAPM_OUTPUT("LOUT1"),
+SND_SOC_DAPM_OUTPUT("ROUT1"),
+SND_SOC_DAPM_OUTPUT("LOUT2"),
+SND_SOC_DAPM_OUTPUT("ROUT2"),
+SND_SOC_DAPM_OUTPUT("MONOOUT"),
+SND_SOC_DAPM_OUTPUT("OUT3"),
+};
+
+static const struct snd_soc_dapm_route wm8955_intercon[] = {
+	{ "DACL", NULL, "SYSCLK" },
+	{ "DACR", NULL, "SYSCLK" },
+
+	{ "Mono Input", NULL, "MONOIN-" },
+	{ "Mono Input", NULL, "MONOIN+" },
+
+	{ "Left", "Playback Switch", "DACL" },
+	{ "Left", "Right Playback Switch", "DACR" },
+	{ "Left", "Bypass Switch", "LINEINL" },
+	{ "Left", "Mono Switch", "Mono Input" },
+
+	{ "Right", "Playback Switch", "DACR" },
+	{ "Right", "Left Playback Switch", "DACL" },
+	{ "Right", "Bypass Switch", "LINEINR" },
+	{ "Right", "Mono Switch", "Mono Input" },
+
+	{ "Mono", "Left Playback Switch", "DACL" },
+	{ "Mono", "Right Playback Switch", "DACR" },
+	{ "Mono", "Left Bypass Switch", "LINEINL" },
+	{ "Mono", "Right Bypass Switch", "LINEINR" },
+
+	{ "LOUT1 PGA", NULL, "Left" },
+	{ "LOUT1", NULL, "TSDEN" },
+	{ "LOUT1", NULL, "LOUT1 PGA" },
+
+	{ "ROUT1 PGA", NULL, "Right" },
+	{ "ROUT1", NULL, "TSDEN" },
+	{ "ROUT1", NULL, "ROUT1 PGA" },
+
+	{ "LOUT2 PGA", NULL, "Left" },
+	{ "LOUT2", NULL, "TSDEN" },
+	{ "LOUT2", NULL, "LOUT2 PGA" },
+
+	{ "ROUT2 PGA", NULL, "Right" },
+	{ "ROUT2", NULL, "TSDEN" },
+	{ "ROUT2", NULL, "ROUT2 PGA" },
+
+	{ "MOUT PGA", NULL, "Mono" },
+	{ "MONOOUT", NULL, "MOUT PGA" },
+
+	/* OUT3 not currently implemented */
+	{ "OUT3", NULL, "OUT3 PGA" },
+};
+
+static int wm8955_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_add_controls(codec, wm8955_snd_controls,
+			     ARRAY_SIZE(wm8955_snd_controls));
+
+	snd_soc_dapm_new_controls(codec, wm8955_dapm_widgets,
+				  ARRAY_SIZE(wm8955_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, wm8955_intercon,
+				ARRAY_SIZE(wm8955_intercon));
+
+	return 0;
+}
+
+static int wm8955_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8955_priv *wm8955 = codec->private_data;
+	int ret;
+	int wl;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		wl = 0;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		wl = 0x4;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		wl = 0x8;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		wl = 0xc;
+		break;
+	default:
+		return -EINVAL;
+	}
+	snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
+			    WM8955_WL_MASK, wl);
+
+	wm8955->fs = params_rate(params);
+	wm8955_set_deemph(codec);
+
+	/* If the chip is clocked then disable the clocks and force a
+	 * reconfiguration, otherwise DAPM will power up the
+	 * clocks for us later. */
+	ret = snd_soc_read(codec, WM8955_POWER_MANAGEMENT_1);
+	if (ret < 0)
+		return ret;
+	if (ret & WM8955_DIGENB) {
+		snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+				    WM8955_DIGENB, 0);
+		snd_soc_update_bits(codec, WM8955_CLOCKING_PLL,
+				    WM8955_PLL_RB | WM8955_PLLEN, 0);
+
+		wm8955_configure_clocking(codec);
+	}
+
+	return 0;
+}
+
+
+static int wm8955_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+			     unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8955_priv *priv = codec->private_data;
+	int div;
+
+	switch (clk_id) {
+	case WM8955_CLK_MCLK:
+		if (freq > 15000000) {
+			priv->mclk_rate = freq /= 2;
+			div = WM8955_MCLKDIV2;
+		} else {
+			priv->mclk_rate = freq;
+			div = 0;
+		}
+
+		snd_soc_update_bits(codec, WM8955_SAMPLE_RATE,
+				    WM8955_MCLKDIV2, div);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
+
+	return 0;
+}
+
+static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 aif = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		aif |= WM8955_MS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_B:
+		aif |= WM8955_LRP;
+	case SND_SOC_DAIFMT_DSP_A:
+		aif |= 0x3;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif |= 0x2;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aif |= 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif |= WM8955_BCLKINV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif |= WM8955_BCLKINV | WM8955_LRP;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif |= WM8955_BCLKINV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif |= WM8955_LRP;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_update_bits(codec, WM8955_AUDIO_INTERFACE,
+			    WM8955_MS | WM8955_FORMAT_MASK | WM8955_BCLKINV |
+			    WM8955_LRP, aif);
+
+	return 0;
+}
+
+
+static int wm8955_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	int val;
+
+	if (mute)
+		val = WM8955_DACMU;
+	else
+		val = 0;
+
+	snd_soc_update_bits(codec, WM8955_DAC_CONTROL, WM8955_DACMU, val);
+
+	return 0;
+}
+
+static int wm8955_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	struct wm8955_priv *wm8955 = codec->private_data;
+	int ret, i;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* VMID resistance 2*50k */
+		snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+				    WM8955_VMIDSEL_MASK,
+				    0x1 << WM8955_VMIDSEL_SHIFT);
+
+		/* Default bias current */
+		snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
+				    WM8955_VSEL_MASK,
+				    0x2 << WM8955_VSEL_SHIFT);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
+						    wm8955->supplies);
+			if (ret != 0) {
+				dev_err(codec->dev,
+					"Failed to enable supplies: %d\n",
+					ret);
+				return ret;
+			}
+
+			/* Sync back cached values if they're
+			 * different from the hardware default.
+			 */
+			for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
+				if (i == WM8955_RESET)
+					continue;
+
+				if (wm8955->reg_cache[i] == wm8955_reg[i])
+					continue;
+
+				snd_soc_write(codec, i, wm8955->reg_cache[i]);
+			}
+
+			/* Enable VREF and VMID */
+			snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+					    WM8955_VREF |
+					    WM8955_VMIDSEL_MASK,
+					    WM8955_VREF |
+					    0x3 << WM8955_VREF_SHIFT);
+
+			/* Let VMID ramp */
+			msleep(500);
+
+			/* High resistance VROI to maintain outputs */
+			snd_soc_update_bits(codec,
+					    WM8955_ADDITIONAL_CONTROL_3,
+					    WM8955_VROI, WM8955_VROI);
+		}
+
+		/* Maintain VMID with 2*250k */
+		snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+				    WM8955_VMIDSEL_MASK,
+				    0x2 << WM8955_VMIDSEL_SHIFT);
+
+		/* Minimum bias current */
+		snd_soc_update_bits(codec, WM8955_ADDITIONAL_CONTROL_1,
+				    WM8955_VSEL_MASK, 0);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Low resistance VROI to help discharge */
+		snd_soc_update_bits(codec,
+				    WM8955_ADDITIONAL_CONTROL_3,
+				    WM8955_VROI, 0);
+
+		/* Turn off VMID and VREF */
+		snd_soc_update_bits(codec, WM8955_POWER_MANAGEMENT_1,
+				    WM8955_VREF |
+				    WM8955_VMIDSEL_MASK, 0);
+
+		regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies),
+				       wm8955->supplies);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define WM8955_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8955_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8955_dai_ops = {
+	.set_sysclk = wm8955_set_sysclk,
+	.set_fmt = wm8955_set_fmt,
+	.hw_params = wm8955_hw_params,
+	.digital_mute = wm8955_digital_mute,
+};
+
+struct snd_soc_dai wm8955_dai = {
+	.name = "WM8955",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = WM8955_RATES,
+		.formats = WM8955_FORMATS,
+	},
+	.ops = &wm8955_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8955_dai);
+
+#ifdef CONFIG_PM
+static int wm8955_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8955_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+static int wm8955_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	wm8955_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+}
+#else
+#define wm8955_suspend NULL
+#define wm8955_resume NULL
+#endif
+
+static int wm8955_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8955_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8955_codec;
+	codec = wm8955_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	wm8955_add_widgets(codec);
+
+	return ret;
+
+pcm_err:
+	return ret;
+}
+
+static int wm8955_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8955 = {
+	.probe = 	wm8955_probe,
+	.remove = 	wm8955_remove,
+	.suspend = 	wm8955_suspend,
+	.resume =	wm8955_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8955);
+
+static int wm8955_register(struct wm8955_priv *wm8955,
+			   enum snd_soc_control_type control)
+{
+	int ret;
+	struct snd_soc_codec *codec = &wm8955->codec;
+	int i;
+
+	if (wm8955_codec) {
+		dev_err(codec->dev, "Another WM8955 is registered\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8955;
+	codec->name = "WM8955";
+	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8955_set_bias_level;
+	codec->dai = &wm8955_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = WM8955_MAX_REGISTER;
+	codec->reg_cache = &wm8955->reg_cache;
+
+	memcpy(codec->reg_cache, wm8955_reg, sizeof(wm8955_reg));
+
+	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+		goto err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(wm8955->supplies); i++)
+		wm8955->supplies[i].supply = wm8955_supply_names[i];
+
+	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8955->supplies),
+				 wm8955->supplies);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+		goto err;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(wm8955->supplies),
+				    wm8955->supplies);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+		goto err_get;
+	}
+
+	ret = wm8955_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
+		goto err_enable;
+	}
+
+	wm8955_dai.dev = codec->dev;
+
+	/* Change some default settings - latch VU and enable ZC */
+	wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
+	wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
+	wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
+	wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
+	wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
+	wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
+	wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+
+	/* Also enable adaptive bass boost by default */
+	wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+
+	/* Set platform data values */
+	if (wm8955->pdata) {
+		if (wm8955->pdata->out2_speaker)
+			wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
+				|= WM8955_ROUT2INV;
+
+		if (wm8955->pdata->monoin_diff)
+			wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
+				|= WM8955_DMEN;
+	}
+
+	wm8955_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Bias level configuration will have done an extra enable */
+	regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+
+	wm8955_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8955_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	return 0;
+
+err_enable:
+	regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+err_get:
+	regulator_bulk_free(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+err:
+	kfree(wm8955);
+	return ret;
+}
+
+static void wm8955_unregister(struct wm8955_priv *wm8955)
+{
+	wm8955_set_bias_level(&wm8955->codec, SND_SOC_BIAS_OFF);
+	regulator_bulk_free(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
+	snd_soc_unregister_dai(&wm8955_dai);
+	snd_soc_unregister_codec(&wm8955->codec);
+	kfree(wm8955);
+	wm8955_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8955_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm8955_priv *wm8955;
+	struct snd_soc_codec *codec;
+
+	wm8955 = kzalloc(sizeof(struct wm8955_priv), GFP_KERNEL);
+	if (wm8955 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8955->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8955);
+	codec->control_data = i2c;
+	wm8955->pdata = i2c->dev.platform_data;
+
+	codec->dev = &i2c->dev;
+
+	return wm8955_register(wm8955, SND_SOC_I2C);
+}
+
+static __devexit int wm8955_i2c_remove(struct i2c_client *client)
+{
+	struct wm8955_priv *wm8955 = i2c_get_clientdata(client);
+	wm8955_unregister(wm8955);
+	return 0;
+}
+
+static const struct i2c_device_id wm8955_i2c_id[] = {
+	{ "wm8955", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8955_i2c_id);
+
+static struct i2c_driver wm8955_i2c_driver = {
+	.driver = {
+		.name = "wm8955",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm8955_i2c_probe,
+	.remove =   __devexit_p(wm8955_i2c_remove),
+	.id_table = wm8955_i2c_id,
+};
+#endif
+
+static int __init wm8955_modinit(void)
+{
+	int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8955_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8955 I2C driver: %d\n",
+		       ret);
+	}
+#endif
+	return 0;
+}
+module_init(wm8955_modinit);
+
+static void __exit wm8955_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8955_i2c_driver);
+#endif
+}
+module_exit(wm8955_exit);
+
+MODULE_DESCRIPTION("ASoC WM8955 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8955.h b/sound/soc/codecs/wm8955.h
new file mode 100644
index 0000000..ae349c8
--- /dev/null
+++ b/sound/soc/codecs/wm8955.h
@@ -0,0 +1,489 @@
+/*
+ * wm8955.h  --  WM8904 ASoC driver
+ *
+ * Copyright 2009 Wolfson Microelectronics, plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8955_H
+#define _WM8955_H
+
+#define WM8955_CLK_MCLK 1
+
+extern struct snd_soc_dai wm8955_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8955;
+
+/*
+ * Register values.
+ */
+#define WM8955_LOUT1_VOLUME                     0x02
+#define WM8955_ROUT1_VOLUME                     0x03
+#define WM8955_DAC_CONTROL                      0x05
+#define WM8955_AUDIO_INTERFACE                  0x07
+#define WM8955_SAMPLE_RATE                      0x08
+#define WM8955_LEFT_DAC_VOLUME                  0x0A
+#define WM8955_RIGHT_DAC_VOLUME                 0x0B
+#define WM8955_BASS_CONTROL                     0x0C
+#define WM8955_TREBLE_CONTROL                   0x0D
+#define WM8955_RESET                            0x0F
+#define WM8955_ADDITIONAL_CONTROL_1             0x17
+#define WM8955_ADDITIONAL_CONTROL_2             0x18
+#define WM8955_POWER_MANAGEMENT_1               0x19
+#define WM8955_POWER_MANAGEMENT_2               0x1A
+#define WM8955_ADDITIONAL_CONTROL_3             0x1B
+#define WM8955_LEFT_OUT_MIX_1                   0x22
+#define WM8955_LEFT_OUT_MIX_2                   0x23
+#define WM8955_RIGHT_OUT_MIX_1                  0x24
+#define WM8955_RIGHT_OUT_MIX_2                  0x25
+#define WM8955_MONO_OUT_MIX_1                   0x26
+#define WM8955_MONO_OUT_MIX_2                   0x27
+#define WM8955_LOUT2_VOLUME                     0x28
+#define WM8955_ROUT2_VOLUME                     0x29
+#define WM8955_MONOOUT_VOLUME                   0x2A
+#define WM8955_CLOCKING_PLL                     0x2B
+#define WM8955_PLL_CONTROL_1                    0x2C
+#define WM8955_PLL_CONTROL_2                    0x2D
+#define WM8955_PLL_CONTROL_3                    0x2E
+#define WM8955_PLL_CONTROL_4                    0x3B
+
+#define WM8955_REGISTER_COUNT                   29
+#define WM8955_MAX_REGISTER                     0x3B
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R2 (0x02) - LOUT1 volume
+ */
+#define WM8955_LO1VU                            0x0100  /* LO1VU */
+#define WM8955_LO1VU_MASK                       0x0100  /* LO1VU */
+#define WM8955_LO1VU_SHIFT                           8  /* LO1VU */
+#define WM8955_LO1VU_WIDTH                           1  /* LO1VU */
+#define WM8955_LO1ZC                            0x0080  /* LO1ZC */
+#define WM8955_LO1ZC_MASK                       0x0080  /* LO1ZC */
+#define WM8955_LO1ZC_SHIFT                           7  /* LO1ZC */
+#define WM8955_LO1ZC_WIDTH                           1  /* LO1ZC */
+#define WM8955_LOUTVOL_MASK                     0x007F  /* LOUTVOL - [6:0] */
+#define WM8955_LOUTVOL_SHIFT                         0  /* LOUTVOL - [6:0] */
+#define WM8955_LOUTVOL_WIDTH                         7  /* LOUTVOL - [6:0] */
+
+/*
+ * R3 (0x03) - ROUT1 volume
+ */
+#define WM8955_RO1VU                            0x0100  /* RO1VU */
+#define WM8955_RO1VU_MASK                       0x0100  /* RO1VU */
+#define WM8955_RO1VU_SHIFT                           8  /* RO1VU */
+#define WM8955_RO1VU_WIDTH                           1  /* RO1VU */
+#define WM8955_RO1ZC                            0x0080  /* RO1ZC */
+#define WM8955_RO1ZC_MASK                       0x0080  /* RO1ZC */
+#define WM8955_RO1ZC_SHIFT                           7  /* RO1ZC */
+#define WM8955_RO1ZC_WIDTH                           1  /* RO1ZC */
+#define WM8955_ROUTVOL_MASK                     0x007F  /* ROUTVOL - [6:0] */
+#define WM8955_ROUTVOL_SHIFT                         0  /* ROUTVOL - [6:0] */
+#define WM8955_ROUTVOL_WIDTH                         7  /* ROUTVOL - [6:0] */
+
+/*
+ * R5 (0x05) - DAC Control
+ */
+#define WM8955_DAT                              0x0080  /* DAT */
+#define WM8955_DAT_MASK                         0x0080  /* DAT */
+#define WM8955_DAT_SHIFT                             7  /* DAT */
+#define WM8955_DAT_WIDTH                             1  /* DAT */
+#define WM8955_DACMU                            0x0008  /* DACMU */
+#define WM8955_DACMU_MASK                       0x0008  /* DACMU */
+#define WM8955_DACMU_SHIFT                           3  /* DACMU */
+#define WM8955_DACMU_WIDTH                           1  /* DACMU */
+#define WM8955_DEEMPH_MASK                      0x0006  /* DEEMPH - [2:1] */
+#define WM8955_DEEMPH_SHIFT                          1  /* DEEMPH - [2:1] */
+#define WM8955_DEEMPH_WIDTH                          2  /* DEEMPH - [2:1] */
+
+/*
+ * R7 (0x07) - Audio Interface
+ */
+#define WM8955_BCLKINV                          0x0080  /* BCLKINV */
+#define WM8955_BCLKINV_MASK                     0x0080  /* BCLKINV */
+#define WM8955_BCLKINV_SHIFT                         7  /* BCLKINV */
+#define WM8955_BCLKINV_WIDTH                         1  /* BCLKINV */
+#define WM8955_MS                               0x0040  /* MS */
+#define WM8955_MS_MASK                          0x0040  /* MS */
+#define WM8955_MS_SHIFT                              6  /* MS */
+#define WM8955_MS_WIDTH                              1  /* MS */
+#define WM8955_LRSWAP                           0x0020  /* LRSWAP */
+#define WM8955_LRSWAP_MASK                      0x0020  /* LRSWAP */
+#define WM8955_LRSWAP_SHIFT                          5  /* LRSWAP */
+#define WM8955_LRSWAP_WIDTH                          1  /* LRSWAP */
+#define WM8955_LRP                              0x0010  /* LRP */
+#define WM8955_LRP_MASK                         0x0010  /* LRP */
+#define WM8955_LRP_SHIFT                             4  /* LRP */
+#define WM8955_LRP_WIDTH                             1  /* LRP */
+#define WM8955_WL_MASK                          0x000C  /* WL - [3:2] */
+#define WM8955_WL_SHIFT                              2  /* WL - [3:2] */
+#define WM8955_WL_WIDTH                              2  /* WL - [3:2] */
+#define WM8955_FORMAT_MASK                      0x0003  /* FORMAT - [1:0] */
+#define WM8955_FORMAT_SHIFT                          0  /* FORMAT - [1:0] */
+#define WM8955_FORMAT_WIDTH                          2  /* FORMAT - [1:0] */
+
+/*
+ * R8 (0x08) - Sample Rate
+ */
+#define WM8955_BCLKDIV2                         0x0080  /* BCLKDIV2 */
+#define WM8955_BCLKDIV2_MASK                    0x0080  /* BCLKDIV2 */
+#define WM8955_BCLKDIV2_SHIFT                        7  /* BCLKDIV2 */
+#define WM8955_BCLKDIV2_WIDTH                        1  /* BCLKDIV2 */
+#define WM8955_MCLKDIV2                         0x0040  /* MCLKDIV2 */
+#define WM8955_MCLKDIV2_MASK                    0x0040  /* MCLKDIV2 */
+#define WM8955_MCLKDIV2_SHIFT                        6  /* MCLKDIV2 */
+#define WM8955_MCLKDIV2_WIDTH                        1  /* MCLKDIV2 */
+#define WM8955_SR_MASK                          0x003E  /* SR - [5:1] */
+#define WM8955_SR_SHIFT                              1  /* SR - [5:1] */
+#define WM8955_SR_WIDTH                              5  /* SR - [5:1] */
+#define WM8955_USB                              0x0001  /* USB */
+#define WM8955_USB_MASK                         0x0001  /* USB */
+#define WM8955_USB_SHIFT                             0  /* USB */
+#define WM8955_USB_WIDTH                             1  /* USB */
+
+/*
+ * R10 (0x0A) - Left DAC volume
+ */
+#define WM8955_LDVU                             0x0100  /* LDVU */
+#define WM8955_LDVU_MASK                        0x0100  /* LDVU */
+#define WM8955_LDVU_SHIFT                            8  /* LDVU */
+#define WM8955_LDVU_WIDTH                            1  /* LDVU */
+#define WM8955_LDACVOL_MASK                     0x00FF  /* LDACVOL - [7:0] */
+#define WM8955_LDACVOL_SHIFT                         0  /* LDACVOL - [7:0] */
+#define WM8955_LDACVOL_WIDTH                         8  /* LDACVOL - [7:0] */
+
+/*
+ * R11 (0x0B) - Right DAC volume
+ */
+#define WM8955_RDVU                             0x0100  /* RDVU */
+#define WM8955_RDVU_MASK                        0x0100  /* RDVU */
+#define WM8955_RDVU_SHIFT                            8  /* RDVU */
+#define WM8955_RDVU_WIDTH                            1  /* RDVU */
+#define WM8955_RDACVOL_MASK                     0x00FF  /* RDACVOL - [7:0] */
+#define WM8955_RDACVOL_SHIFT                         0  /* RDACVOL - [7:0] */
+#define WM8955_RDACVOL_WIDTH                         8  /* RDACVOL - [7:0] */
+
+/*
+ * R12 (0x0C) - Bass control
+ */
+#define WM8955_BB                               0x0080  /* BB */
+#define WM8955_BB_MASK                          0x0080  /* BB */
+#define WM8955_BB_SHIFT                              7  /* BB */
+#define WM8955_BB_WIDTH                              1  /* BB */
+#define WM8955_BC                               0x0040  /* BC */
+#define WM8955_BC_MASK                          0x0040  /* BC */
+#define WM8955_BC_SHIFT                              6  /* BC */
+#define WM8955_BC_WIDTH                              1  /* BC */
+#define WM8955_BASS_MASK                        0x000F  /* BASS - [3:0] */
+#define WM8955_BASS_SHIFT                            0  /* BASS - [3:0] */
+#define WM8955_BASS_WIDTH                            4  /* BASS - [3:0] */
+
+/*
+ * R13 (0x0D) - Treble control
+ */
+#define WM8955_TC                               0x0040  /* TC */
+#define WM8955_TC_MASK                          0x0040  /* TC */
+#define WM8955_TC_SHIFT                              6  /* TC */
+#define WM8955_TC_WIDTH                              1  /* TC */
+#define WM8955_TRBL_MASK                        0x000F  /* TRBL - [3:0] */
+#define WM8955_TRBL_SHIFT                            0  /* TRBL - [3:0] */
+#define WM8955_TRBL_WIDTH                            4  /* TRBL - [3:0] */
+
+/*
+ * R15 (0x0F) - Reset
+ */
+#define WM8955_RESET_MASK                       0x01FF  /* RESET - [8:0] */
+#define WM8955_RESET_SHIFT                           0  /* RESET - [8:0] */
+#define WM8955_RESET_WIDTH                           9  /* RESET - [8:0] */
+
+/*
+ * R23 (0x17) - Additional control (1)
+ */
+#define WM8955_TSDEN                            0x0100  /* TSDEN */
+#define WM8955_TSDEN_MASK                       0x0100  /* TSDEN */
+#define WM8955_TSDEN_SHIFT                           8  /* TSDEN */
+#define WM8955_TSDEN_WIDTH                           1  /* TSDEN */
+#define WM8955_VSEL_MASK                        0x00C0  /* VSEL - [7:6] */
+#define WM8955_VSEL_SHIFT                            6  /* VSEL - [7:6] */
+#define WM8955_VSEL_WIDTH                            2  /* VSEL - [7:6] */
+#define WM8955_DMONOMIX_MASK                    0x0030  /* DMONOMIX - [5:4] */
+#define WM8955_DMONOMIX_SHIFT                        4  /* DMONOMIX - [5:4] */
+#define WM8955_DMONOMIX_WIDTH                        2  /* DMONOMIX - [5:4] */
+#define WM8955_DACINV                           0x0002  /* DACINV */
+#define WM8955_DACINV_MASK                      0x0002  /* DACINV */
+#define WM8955_DACINV_SHIFT                          1  /* DACINV */
+#define WM8955_DACINV_WIDTH                          1  /* DACINV */
+#define WM8955_TOEN                             0x0001  /* TOEN */
+#define WM8955_TOEN_MASK                        0x0001  /* TOEN */
+#define WM8955_TOEN_SHIFT                            0  /* TOEN */
+#define WM8955_TOEN_WIDTH                            1  /* TOEN */
+
+/*
+ * R24 (0x18) - Additional control (2)
+ */
+#define WM8955_OUT3SW_MASK                      0x0180  /* OUT3SW - [8:7] */
+#define WM8955_OUT3SW_SHIFT                          7  /* OUT3SW - [8:7] */
+#define WM8955_OUT3SW_WIDTH                          2  /* OUT3SW - [8:7] */
+#define WM8955_ROUT2INV                         0x0010  /* ROUT2INV */
+#define WM8955_ROUT2INV_MASK                    0x0010  /* ROUT2INV */
+#define WM8955_ROUT2INV_SHIFT                        4  /* ROUT2INV */
+#define WM8955_ROUT2INV_WIDTH                        1  /* ROUT2INV */
+#define WM8955_DACOSR                           0x0001  /* DACOSR */
+#define WM8955_DACOSR_MASK                      0x0001  /* DACOSR */
+#define WM8955_DACOSR_SHIFT                          0  /* DACOSR */
+#define WM8955_DACOSR_WIDTH                          1  /* DACOSR */
+
+/*
+ * R25 (0x19) - Power Management (1)
+ */
+#define WM8955_VMIDSEL_MASK                     0x0180  /* VMIDSEL - [8:7] */
+#define WM8955_VMIDSEL_SHIFT                         7  /* VMIDSEL - [8:7] */
+#define WM8955_VMIDSEL_WIDTH                         2  /* VMIDSEL - [8:7] */
+#define WM8955_VREF                             0x0040  /* VREF */
+#define WM8955_VREF_MASK                        0x0040  /* VREF */
+#define WM8955_VREF_SHIFT                            6  /* VREF */
+#define WM8955_VREF_WIDTH                            1  /* VREF */
+#define WM8955_DIGENB                           0x0001  /* DIGENB */
+#define WM8955_DIGENB_MASK                      0x0001  /* DIGENB */
+#define WM8955_DIGENB_SHIFT                          0  /* DIGENB */
+#define WM8955_DIGENB_WIDTH                          1  /* DIGENB */
+
+/*
+ * R26 (0x1A) - Power Management (2)
+ */
+#define WM8955_DACL                             0x0100  /* DACL */
+#define WM8955_DACL_MASK                        0x0100  /* DACL */
+#define WM8955_DACL_SHIFT                            8  /* DACL */
+#define WM8955_DACL_WIDTH                            1  /* DACL */
+#define WM8955_DACR                             0x0080  /* DACR */
+#define WM8955_DACR_MASK                        0x0080  /* DACR */
+#define WM8955_DACR_SHIFT                            7  /* DACR */
+#define WM8955_DACR_WIDTH                            1  /* DACR */
+#define WM8955_LOUT1                            0x0040  /* LOUT1 */
+#define WM8955_LOUT1_MASK                       0x0040  /* LOUT1 */
+#define WM8955_LOUT1_SHIFT                           6  /* LOUT1 */
+#define WM8955_LOUT1_WIDTH                           1  /* LOUT1 */
+#define WM8955_ROUT1                            0x0020  /* ROUT1 */
+#define WM8955_ROUT1_MASK                       0x0020  /* ROUT1 */
+#define WM8955_ROUT1_SHIFT                           5  /* ROUT1 */
+#define WM8955_ROUT1_WIDTH                           1  /* ROUT1 */
+#define WM8955_LOUT2                            0x0010  /* LOUT2 */
+#define WM8955_LOUT2_MASK                       0x0010  /* LOUT2 */
+#define WM8955_LOUT2_SHIFT                           4  /* LOUT2 */
+#define WM8955_LOUT2_WIDTH                           1  /* LOUT2 */
+#define WM8955_ROUT2                            0x0008  /* ROUT2 */
+#define WM8955_ROUT2_MASK                       0x0008  /* ROUT2 */
+#define WM8955_ROUT2_SHIFT                           3  /* ROUT2 */
+#define WM8955_ROUT2_WIDTH                           1  /* ROUT2 */
+#define WM8955_MONO                             0x0004  /* MONO */
+#define WM8955_MONO_MASK                        0x0004  /* MONO */
+#define WM8955_MONO_SHIFT                            2  /* MONO */
+#define WM8955_MONO_WIDTH                            1  /* MONO */
+#define WM8955_OUT3                             0x0002  /* OUT3 */
+#define WM8955_OUT3_MASK                        0x0002  /* OUT3 */
+#define WM8955_OUT3_SHIFT                            1  /* OUT3 */
+#define WM8955_OUT3_WIDTH                            1  /* OUT3 */
+
+/*
+ * R27 (0x1B) - Additional Control (3)
+ */
+#define WM8955_VROI                             0x0040  /* VROI */
+#define WM8955_VROI_MASK                        0x0040  /* VROI */
+#define WM8955_VROI_SHIFT                            6  /* VROI */
+#define WM8955_VROI_WIDTH                            1  /* VROI */
+
+/*
+ * R34 (0x22) - Left out Mix (1)
+ */
+#define WM8955_LD2LO                            0x0100  /* LD2LO */
+#define WM8955_LD2LO_MASK                       0x0100  /* LD2LO */
+#define WM8955_LD2LO_SHIFT                           8  /* LD2LO */
+#define WM8955_LD2LO_WIDTH                           1  /* LD2LO */
+#define WM8955_LI2LO                            0x0080  /* LI2LO */
+#define WM8955_LI2LO_MASK                       0x0080  /* LI2LO */
+#define WM8955_LI2LO_SHIFT                           7  /* LI2LO */
+#define WM8955_LI2LO_WIDTH                           1  /* LI2LO */
+#define WM8955_LI2LOVOL_MASK                    0x0070  /* LI2LOVOL - [6:4] */
+#define WM8955_LI2LOVOL_SHIFT                        4  /* LI2LOVOL - [6:4] */
+#define WM8955_LI2LOVOL_WIDTH                        3  /* LI2LOVOL - [6:4] */
+
+/*
+ * R35 (0x23) - Left out Mix (2)
+ */
+#define WM8955_RD2LO                            0x0100  /* RD2LO */
+#define WM8955_RD2LO_MASK                       0x0100  /* RD2LO */
+#define WM8955_RD2LO_SHIFT                           8  /* RD2LO */
+#define WM8955_RD2LO_WIDTH                           1  /* RD2LO */
+#define WM8955_RI2LO                            0x0080  /* RI2LO */
+#define WM8955_RI2LO_MASK                       0x0080  /* RI2LO */
+#define WM8955_RI2LO_SHIFT                           7  /* RI2LO */
+#define WM8955_RI2LO_WIDTH                           1  /* RI2LO */
+#define WM8955_RI2LOVOL_MASK                    0x0070  /* RI2LOVOL - [6:4] */
+#define WM8955_RI2LOVOL_SHIFT                        4  /* RI2LOVOL - [6:4] */
+#define WM8955_RI2LOVOL_WIDTH                        3  /* RI2LOVOL - [6:4] */
+
+/*
+ * R36 (0x24) - Right out Mix (1)
+ */
+#define WM8955_LD2RO                            0x0100  /* LD2RO */
+#define WM8955_LD2RO_MASK                       0x0100  /* LD2RO */
+#define WM8955_LD2RO_SHIFT                           8  /* LD2RO */
+#define WM8955_LD2RO_WIDTH                           1  /* LD2RO */
+#define WM8955_LI2RO                            0x0080  /* LI2RO */
+#define WM8955_LI2RO_MASK                       0x0080  /* LI2RO */
+#define WM8955_LI2RO_SHIFT                           7  /* LI2RO */
+#define WM8955_LI2RO_WIDTH                           1  /* LI2RO */
+#define WM8955_LI2ROVOL_MASK                    0x0070  /* LI2ROVOL - [6:4] */
+#define WM8955_LI2ROVOL_SHIFT                        4  /* LI2ROVOL - [6:4] */
+#define WM8955_LI2ROVOL_WIDTH                        3  /* LI2ROVOL - [6:4] */
+
+/*
+ * R37 (0x25) - Right Out Mix (2)
+ */
+#define WM8955_RD2RO                            0x0100  /* RD2RO */
+#define WM8955_RD2RO_MASK                       0x0100  /* RD2RO */
+#define WM8955_RD2RO_SHIFT                           8  /* RD2RO */
+#define WM8955_RD2RO_WIDTH                           1  /* RD2RO */
+#define WM8955_RI2RO                            0x0080  /* RI2RO */
+#define WM8955_RI2RO_MASK                       0x0080  /* RI2RO */
+#define WM8955_RI2RO_SHIFT                           7  /* RI2RO */
+#define WM8955_RI2RO_WIDTH                           1  /* RI2RO */
+#define WM8955_RI2ROVOL_MASK                    0x0070  /* RI2ROVOL - [6:4] */
+#define WM8955_RI2ROVOL_SHIFT                        4  /* RI2ROVOL - [6:4] */
+#define WM8955_RI2ROVOL_WIDTH                        3  /* RI2ROVOL - [6:4] */
+
+/*
+ * R38 (0x26) - Mono out Mix (1)
+ */
+#define WM8955_LD2MO                            0x0100  /* LD2MO */
+#define WM8955_LD2MO_MASK                       0x0100  /* LD2MO */
+#define WM8955_LD2MO_SHIFT                           8  /* LD2MO */
+#define WM8955_LD2MO_WIDTH                           1  /* LD2MO */
+#define WM8955_LI2MO                            0x0080  /* LI2MO */
+#define WM8955_LI2MO_MASK                       0x0080  /* LI2MO */
+#define WM8955_LI2MO_SHIFT                           7  /* LI2MO */
+#define WM8955_LI2MO_WIDTH                           1  /* LI2MO */
+#define WM8955_LI2MOVOL_MASK                    0x0070  /* LI2MOVOL - [6:4] */
+#define WM8955_LI2MOVOL_SHIFT                        4  /* LI2MOVOL - [6:4] */
+#define WM8955_LI2MOVOL_WIDTH                        3  /* LI2MOVOL - [6:4] */
+#define WM8955_DMEN                             0x0001  /* DMEN */
+#define WM8955_DMEN_MASK                        0x0001  /* DMEN */
+#define WM8955_DMEN_SHIFT                            0  /* DMEN */
+#define WM8955_DMEN_WIDTH                            1  /* DMEN */
+
+/*
+ * R39 (0x27) - Mono out Mix (2)
+ */
+#define WM8955_RD2MO                            0x0100  /* RD2MO */
+#define WM8955_RD2MO_MASK                       0x0100  /* RD2MO */
+#define WM8955_RD2MO_SHIFT                           8  /* RD2MO */
+#define WM8955_RD2MO_WIDTH                           1  /* RD2MO */
+#define WM8955_RI2MO                            0x0080  /* RI2MO */
+#define WM8955_RI2MO_MASK                       0x0080  /* RI2MO */
+#define WM8955_RI2MO_SHIFT                           7  /* RI2MO */
+#define WM8955_RI2MO_WIDTH                           1  /* RI2MO */
+#define WM8955_RI2MOVOL_MASK                    0x0070  /* RI2MOVOL - [6:4] */
+#define WM8955_RI2MOVOL_SHIFT                        4  /* RI2MOVOL - [6:4] */
+#define WM8955_RI2MOVOL_WIDTH                        3  /* RI2MOVOL - [6:4] */
+
+/*
+ * R40 (0x28) - LOUT2 volume
+ */
+#define WM8955_LO2VU                            0x0100  /* LO2VU */
+#define WM8955_LO2VU_MASK                       0x0100  /* LO2VU */
+#define WM8955_LO2VU_SHIFT                           8  /* LO2VU */
+#define WM8955_LO2VU_WIDTH                           1  /* LO2VU */
+#define WM8955_LO2ZC                            0x0080  /* LO2ZC */
+#define WM8955_LO2ZC_MASK                       0x0080  /* LO2ZC */
+#define WM8955_LO2ZC_SHIFT                           7  /* LO2ZC */
+#define WM8955_LO2ZC_WIDTH                           1  /* LO2ZC */
+#define WM8955_LOUT2VOL_MASK                    0x007F  /* LOUT2VOL - [6:0] */
+#define WM8955_LOUT2VOL_SHIFT                        0  /* LOUT2VOL - [6:0] */
+#define WM8955_LOUT2VOL_WIDTH                        7  /* LOUT2VOL - [6:0] */
+
+/*
+ * R41 (0x29) - ROUT2 volume
+ */
+#define WM8955_RO2VU                            0x0100  /* RO2VU */
+#define WM8955_RO2VU_MASK                       0x0100  /* RO2VU */
+#define WM8955_RO2VU_SHIFT                           8  /* RO2VU */
+#define WM8955_RO2VU_WIDTH                           1  /* RO2VU */
+#define WM8955_RO2ZC                            0x0080  /* RO2ZC */
+#define WM8955_RO2ZC_MASK                       0x0080  /* RO2ZC */
+#define WM8955_RO2ZC_SHIFT                           7  /* RO2ZC */
+#define WM8955_RO2ZC_WIDTH                           1  /* RO2ZC */
+#define WM8955_ROUT2VOL_MASK                    0x007F  /* ROUT2VOL - [6:0] */
+#define WM8955_ROUT2VOL_SHIFT                        0  /* ROUT2VOL - [6:0] */
+#define WM8955_ROUT2VOL_WIDTH                        7  /* ROUT2VOL - [6:0] */
+
+/*
+ * R42 (0x2A) - MONOOUT volume
+ */
+#define WM8955_MOZC                             0x0080  /* MOZC */
+#define WM8955_MOZC_MASK                        0x0080  /* MOZC */
+#define WM8955_MOZC_SHIFT                            7  /* MOZC */
+#define WM8955_MOZC_WIDTH                            1  /* MOZC */
+#define WM8955_MOUTVOL_MASK                     0x007F  /* MOUTVOL - [6:0] */
+#define WM8955_MOUTVOL_SHIFT                         0  /* MOUTVOL - [6:0] */
+#define WM8955_MOUTVOL_WIDTH                         7  /* MOUTVOL - [6:0] */
+
+/*
+ * R43 (0x2B) - Clocking / PLL
+ */
+#define WM8955_MCLKSEL                          0x0100  /* MCLKSEL */
+#define WM8955_MCLKSEL_MASK                     0x0100  /* MCLKSEL */
+#define WM8955_MCLKSEL_SHIFT                         8  /* MCLKSEL */
+#define WM8955_MCLKSEL_WIDTH                         1  /* MCLKSEL */
+#define WM8955_PLLOUTDIV2                       0x0020  /* PLLOUTDIV2 */
+#define WM8955_PLLOUTDIV2_MASK                  0x0020  /* PLLOUTDIV2 */
+#define WM8955_PLLOUTDIV2_SHIFT                      5  /* PLLOUTDIV2 */
+#define WM8955_PLLOUTDIV2_WIDTH                      1  /* PLLOUTDIV2 */
+#define WM8955_PLL_RB                           0x0010  /* PLL_RB */
+#define WM8955_PLL_RB_MASK                      0x0010  /* PLL_RB */
+#define WM8955_PLL_RB_SHIFT                          4  /* PLL_RB */
+#define WM8955_PLL_RB_WIDTH                          1  /* PLL_RB */
+#define WM8955_PLLEN                            0x0008  /* PLLEN */
+#define WM8955_PLLEN_MASK                       0x0008  /* PLLEN */
+#define WM8955_PLLEN_SHIFT                           3  /* PLLEN */
+#define WM8955_PLLEN_WIDTH                           1  /* PLLEN */
+
+/*
+ * R44 (0x2C) - PLL Control 1
+ */
+#define WM8955_N_MASK                           0x01E0  /* N - [8:5] */
+#define WM8955_N_SHIFT                               5  /* N - [8:5] */
+#define WM8955_N_WIDTH                               4  /* N - [8:5] */
+#define WM8955_K_21_18_MASK                     0x000F  /* K(21:18) - [3:0] */
+#define WM8955_K_21_18_SHIFT                         0  /* K(21:18) - [3:0] */
+#define WM8955_K_21_18_WIDTH                         4  /* K(21:18) - [3:0] */
+
+/*
+ * R45 (0x2D) - PLL Control 2
+ */
+#define WM8955_K_17_9_MASK                      0x01FF  /* K(17:9) - [8:0] */
+#define WM8955_K_17_9_SHIFT                          0  /* K(17:9) - [8:0] */
+#define WM8955_K_17_9_WIDTH                          9  /* K(17:9) - [8:0] */
+
+/*
+ * R46 (0x2E) - PLL Control 3
+ */
+#define WM8955_K_8_0_MASK                       0x01FF  /* K(8:0) - [8:0] */
+#define WM8955_K_8_0_SHIFT                           0  /* K(8:0) - [8:0] */
+#define WM8955_K_8_0_WIDTH                           9  /* K(8:0) - [8:0] */
+
+/*
+ * R59 (0x3B) - PLL Control 4
+ */
+#define WM8955_KEN                              0x0080  /* KEN */
+#define WM8955_KEN_MASK                         0x0080  /* KEN */
+#define WM8955_KEN_SHIFT                             7  /* KEN */
+#define WM8955_KEN_WIDTH                             1  /* KEN */
+
+#endif