diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
index 17b4a94..d93746c 100644
--- a/Documentation/devicetree/bindings/clock/zynq-7000.txt
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -14,6 +14,7 @@
 Required properties:
  - #clock-cells : Must be 1
  - compatible : "xlnx,ps7-clkc"
+ - reg : SLCR offset and size taken via syscon < 0x100 0x100 >
  - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
 		      (usually 33 MHz oscillators are used for Zynq platforms)
  - clock-output-names : List of strings used to name the clock outputs. Shall be
@@ -87,10 +88,11 @@
  47: dbg_apb
 
 Example:
-	clkc: clkc {
+	clkc: clkc@100 {
 		#clock-cells = <1>;
 		compatible = "xlnx,ps7-clkc";
 		ps-clk-frequency = <33333333>;
+		reg = <0x100 0x100>;
 		clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
 				"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
 				"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 81e5677..602e12e 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -123,30 +123,28 @@
 		} ;
 
 		slcr: slcr@f8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "xlnx,zynq-slcr", "syscon";
 			reg = <0xF8000000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				clkc: clkc {
-					#clock-cells = <1>;
-					compatible = "xlnx,ps7-clkc";
-					ps-clk-frequency = <33333333>;
-					fclk-enable = <0>;
-					clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
-							"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
-							"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
-							"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
-							"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
-							"dma", "usb0_aper", "usb1_aper", "gem0_aper",
-							"gem1_aper", "sdio0_aper", "sdio1_aper",
-							"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
-							"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
-							"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
-							"dbg_trc", "dbg_apb";
-				};
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				ps-clk-frequency = <33333333>;
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
 			};
 		};
 
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 38401cf..93ea19b 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -67,7 +67,7 @@
 {
 	zynq_early_slcr_init();
 
-	zynq_clock_init(zynq_slcr_base);
+	zynq_clock_init();
 	clocksource_of_init();
 }
 
diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 09dd017..03052d6 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -21,34 +21,35 @@
 #include <linux/clk/zynq.h>
 #include <linux/clk-provider.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/io.h>
 
-static void __iomem *zynq_slcr_base_priv;
+static void __iomem *zynq_clkc_base;
 
-#define SLCR_ARMPLL_CTRL		(zynq_slcr_base_priv + 0x100)
-#define SLCR_DDRPLL_CTRL		(zynq_slcr_base_priv + 0x104)
-#define SLCR_IOPLL_CTRL			(zynq_slcr_base_priv + 0x108)
-#define SLCR_PLL_STATUS			(zynq_slcr_base_priv + 0x10c)
-#define SLCR_ARM_CLK_CTRL		(zynq_slcr_base_priv + 0x120)
-#define SLCR_DDR_CLK_CTRL		(zynq_slcr_base_priv + 0x124)
-#define SLCR_DCI_CLK_CTRL		(zynq_slcr_base_priv + 0x128)
-#define SLCR_APER_CLK_CTRL		(zynq_slcr_base_priv + 0x12c)
-#define SLCR_GEM0_CLK_CTRL		(zynq_slcr_base_priv + 0x140)
-#define SLCR_GEM1_CLK_CTRL		(zynq_slcr_base_priv + 0x144)
-#define SLCR_SMC_CLK_CTRL		(zynq_slcr_base_priv + 0x148)
-#define SLCR_LQSPI_CLK_CTRL		(zynq_slcr_base_priv + 0x14c)
-#define SLCR_SDIO_CLK_CTRL		(zynq_slcr_base_priv + 0x150)
-#define SLCR_UART_CLK_CTRL		(zynq_slcr_base_priv + 0x154)
-#define SLCR_SPI_CLK_CTRL		(zynq_slcr_base_priv + 0x158)
-#define SLCR_CAN_CLK_CTRL		(zynq_slcr_base_priv + 0x15c)
-#define SLCR_CAN_MIOCLK_CTRL		(zynq_slcr_base_priv + 0x160)
-#define SLCR_DBG_CLK_CTRL		(zynq_slcr_base_priv + 0x164)
-#define SLCR_PCAP_CLK_CTRL		(zynq_slcr_base_priv + 0x168)
-#define SLCR_FPGA0_CLK_CTRL		(zynq_slcr_base_priv + 0x170)
-#define SLCR_621_TRUE			(zynq_slcr_base_priv + 0x1c4)
-#define SLCR_SWDT_CLK_SEL		(zynq_slcr_base_priv + 0x304)
+#define SLCR_ARMPLL_CTRL		(zynq_clkc_base + 0x00)
+#define SLCR_DDRPLL_CTRL		(zynq_clkc_base + 0x04)
+#define SLCR_IOPLL_CTRL			(zynq_clkc_base + 0x08)
+#define SLCR_PLL_STATUS			(zynq_clkc_base + 0x0c)
+#define SLCR_ARM_CLK_CTRL		(zynq_clkc_base + 0x20)
+#define SLCR_DDR_CLK_CTRL		(zynq_clkc_base + 0x24)
+#define SLCR_DCI_CLK_CTRL		(zynq_clkc_base + 0x28)
+#define SLCR_APER_CLK_CTRL		(zynq_clkc_base + 0x2c)
+#define SLCR_GEM0_CLK_CTRL		(zynq_clkc_base + 0x40)
+#define SLCR_GEM1_CLK_CTRL		(zynq_clkc_base + 0x44)
+#define SLCR_SMC_CLK_CTRL		(zynq_clkc_base + 0x48)
+#define SLCR_LQSPI_CLK_CTRL		(zynq_clkc_base + 0x4c)
+#define SLCR_SDIO_CLK_CTRL		(zynq_clkc_base + 0x50)
+#define SLCR_UART_CLK_CTRL		(zynq_clkc_base + 0x54)
+#define SLCR_SPI_CLK_CTRL		(zynq_clkc_base + 0x58)
+#define SLCR_CAN_CLK_CTRL		(zynq_clkc_base + 0x5c)
+#define SLCR_CAN_MIOCLK_CTRL		(zynq_clkc_base + 0x60)
+#define SLCR_DBG_CLK_CTRL		(zynq_clkc_base + 0x64)
+#define SLCR_PCAP_CLK_CTRL		(zynq_clkc_base + 0x68)
+#define SLCR_FPGA0_CLK_CTRL		(zynq_clkc_base + 0x70)
+#define SLCR_621_TRUE			(zynq_clkc_base + 0xc4)
+#define SLCR_SWDT_CLK_SEL		(zynq_clkc_base + 0x204)
 
 #define NUM_MIO_PINS	54
 
@@ -569,8 +570,44 @@
 
 CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup);
 
-void __init zynq_clock_init(void __iomem *slcr_base)
+void __init zynq_clock_init(void)
 {
-	zynq_slcr_base_priv = slcr_base;
+	struct device_node *np;
+	struct device_node *slcr;
+	struct resource res;
+
+	np = of_find_compatible_node(NULL, NULL, "xlnx,ps7-clkc");
+	if (!np) {
+		pr_err("%s: clkc node not found\n", __func__);
+		goto np_err;
+	}
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("%s: failed to get resource\n", np->name);
+		goto np_err;
+	}
+
+	slcr = of_get_parent(np);
+
+	if (slcr->data) {
+		zynq_clkc_base = (__force void __iomem *)slcr->data + res.start;
+	} else {
+		pr_err("%s: Unable to get I/O memory\n", np->name);
+		of_node_put(slcr);
+		goto np_err;
+	}
+
+	pr_info("%s: clkc starts at %p\n", __func__, zynq_clkc_base);
+
+	of_node_put(slcr);
+	of_node_put(np);
+
 	of_clk_init(NULL);
+
+	return;
+
+np_err:
+	of_node_put(np);
+	BUG();
+	return;
 }
diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h
index e062d31..7a5633b 100644
--- a/include/linux/clk/zynq.h
+++ b/include/linux/clk/zynq.h
@@ -22,7 +22,7 @@
 
 #include <linux/spinlock.h>
 
-void zynq_clock_init(void __iomem *slcr);
+void zynq_clock_init(void);
 
 struct clk *clk_register_zynq_pll(const char *name, const char *parent,
 		void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index,