diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 66a315e..328774b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -351,7 +351,7 @@
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on PPC_BOOK3S && EXPERIMENTAL
+	depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 27db893..9d3bd4c 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -519,7 +519,7 @@
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
@@ -532,7 +532,7 @@
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
 }
@@ -543,10 +543,10 @@
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
-	eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
+	/* serial clocks need fixup based on int/ext */
+	eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
 }
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
new file mode 100644
index 0000000..abcd0ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/icon.dts
@@ -0,0 +1,447 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "mosaixtech,icon";
+	compatible = "mosaixtech,icon";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+
+				SysACE_CompactFlash: sysace@1,0 {
+					compatible = "xlnx,sysace";
+					interrupt-parent = <&UIC2>;
+					interrupts = <24 0x4>;
+					reg = <0x00000001 0x00000000 0x10000>;
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                rtc@68 {
+                                        compatible = "stm,m41t00";
+                                        reg = <0x68>;
+                                };
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 8cf2c0c..7c3be5e 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -44,6 +44,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4173af3..0f52624 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -20,10 +20,8 @@
 	aliases {
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
-/*
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
-*/
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
@@ -254,7 +252,6 @@
 			};
 		};
 
-/* eTSEC 3/4 are currently broken
 		enet2: ethernet@26000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -310,7 +307,6 @@
 				};
 			};
 		};
- */
 
 		serial0: serial@4500 {
 			cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 5bd1011..3375c2a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -215,6 +215,18 @@
 			clock-frequency = <0>;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x80>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8572-guts";
 			reg = <0xe0000 0x1000>;
@@ -243,8 +255,7 @@
 			protected-sources = <
 			31 32 33 37 38 39       /* enet2 enet3 */
 			76 77 78 79 26 42	/* dma2 pci2 serial*/
-			0xe0 0xe1 0xe2 0xe3     /* msi */
-			0xe4 0xe5 0xe6 0xe7
+			0xe4 0xe5 0xe6 0xe7	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 0efc345..e7b477f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -154,12 +154,8 @@
 		msi@41600 {
 			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
 			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
+			msi-available-ranges = <0x80 0x80>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
 				0xe4 0
 				0xe5 0
 				0xe6 0
@@ -190,6 +186,7 @@
 			0x1 0x2 0x3 0x4         /* pci slot */
 			0x9 0xa 0xb 0xc         /* usb */
 			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
+			0xe0 0xe1 0xe2 0xe3	/* msi */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
new file mode 100644
index 0000000..7fad2df2
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -0,0 +1,698 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc@ffe00000 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1021-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1021-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1021-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		 mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				reg = <0x4>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@B2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1021-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1",
+				     "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1021-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1021-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9
+*/
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe@ffe80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <63 2 60 2>; //high:47 low:44
+			interrupt-parent = <&mpic>;
+		};
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <5>;
+			reg = <0x2400 0x200>;
+			interrupts = <40>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x6000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+				"fsl,cpm-muram-data";
+				reg = <0x0 0x6000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
index d2af32e..81636c0 100644
--- a/arch/powerpc/boot/dts/redwood.dts
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -234,10 +234,132 @@
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
+		};
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pciex@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
 	};
+
 	chosen {
 		linux,stdout-path = "/plb/opb/serial@ef600200";
 	};
diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig
new file mode 100644
index 0000000..277f88c
--- /dev/null
+++ b/arch/powerpc/configs/44x/icon_defconfig
@@ -0,0 +1,1451 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc7
+# Fri May 21 17:40:22 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_ICON=y
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_440SPe=y
+CONFIG_STDBINUTILS=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_BOOTCOUNT is not set
+# CONFIG_DISPLAY_PDSP1880 is not set
+# CONFIG_MUCMC52_IO is not set
+# CONFIG_UC101_IO is not set
+# CONFIG_SRAM is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e3cba4e..b0b2113 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -70,6 +70,7 @@
 extern int machine_check_generic(struct pt_regs *regs);
 extern int machine_check_4xx(struct pt_regs *regs);
 extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500mc(struct pt_regs *regs);
 extern int machine_check_e500(struct pt_regs *regs);
 extern int machine_check_e200(struct pt_regs *regs);
 extern int machine_check_47x(struct pt_regs *regs);
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index a6ca6da..2a9cd74 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -2,6 +2,18 @@
 #define _ASM_POWERPC_KEXEC_H
 #ifdef __KERNEL__
 
+#ifdef CONFIG_FSL_BOOKE
+
+/*
+ * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
+ * and therefore we can only deal with memory within this range
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
+#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
+#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
+
+#else
+
 /*
  * Maximum page that is mapped directly into kernel memory.
  * XXX: Since we copy virt we can use any page we allocate
@@ -21,6 +33,7 @@
 /* TASK_SIZE, probably left over from use_mm ?? */
 #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 #endif
+#endif
 
 #define KEXEC_CONTROL_PAGE_SIZE 4096
 
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 5304a37..2360317 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -4,6 +4,12 @@
  * are not true Book E PowerPCs, they borrowed a number of features
  * before Book E was finalized, and are included here as well.  Unfortunatly,
  * they sometimes used different locations than true Book E CPUs did.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  */
 #ifdef __KERNEL__
 #ifndef __ASM_POWERPC_REG_BOOKE_H__
@@ -88,6 +94,7 @@
 #define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
 #define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
 #define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
+#define SPRN_MCARU	0x239	/* Machine Check Address Register Upper */
 #define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
 #define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
 #define SPRN_MCSR	0x23C	/* Machine Check Status Register */
@@ -196,8 +203,11 @@
 #define PPC47x_MCSR_IPR	0x00400000 /* Imprecise Machine Check Exception */
 
 #ifdef CONFIG_E500
+/* All e500 */
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+
+/* e500v1/v2 */
 #define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
 #define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
 #define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
@@ -209,12 +219,20 @@
 #define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
 #define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
 
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
-			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
-			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
-			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+/* e500mc */
+#define MCSR_DCPERR_MC	0x20000000UL /* D-Cache Parity Error */
+#define MCSR_L2MMU_MHIT	0x04000000UL /* Hit on multiple TLB entries */
+#define MCSR_NMI	0x00100000UL /* Non-Maskable Interrupt */
+#define MCSR_MAV	0x00080000UL /* MCAR address valid */
+#define MCSR_MEA	0x00040000UL /* MCAR is effective address */
+#define MCSR_IF		0x00010000UL /* Instruction Fetch */
+#define MCSR_LD		0x00008000UL /* Load */
+#define MCSR_ST		0x00004000UL /* Store */
+#define MCSR_LDG	0x00002000UL /* Guarded Load */
+#define MCSR_TLBSYNC	0x00000002UL /* Multiple tlbsyncs detected */
+#define MCSR_BSL2_ERR	0x00000001UL /* Backside L2 cache error */
 #endif
+
 #ifdef CONFIG_E200
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
@@ -225,11 +243,6 @@
 #define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
 #define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
 					store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
-			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
-			MCSR_BUS_WRERR)
 #endif
 
 /* Bit definitions for the DBSR. */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 8773263..58d0572 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -57,8 +57,12 @@
 obj-$(CONFIG_E500)		+= idle_e500.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o \
-				   swsusp_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
+ifeq ($(CONFIG_FSL_BOOKE),y)
+obj-$(CONFIG_HIBERNATION)	+= swsusp_booke.o
+else
+obj-$(CONFIG_HIBERNATION)	+= swsusp_$(CONFIG_WORD_SIZE).o
+endif
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 9556be9..87aa0f3 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1840,7 +1840,7 @@
 		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
-		.machine_check		= machine_check_e500,
+		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
 	},
 	{	/* default match */
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 8c066d6..b46f2e0 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -163,6 +163,7 @@
 }
 
 /* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#ifdef CONFIG_PPC_STD_MMU_64
 static void crash_kexec_wait_realmode(int cpu)
 {
 	unsigned int msecs;
@@ -187,6 +188,7 @@
 	}
 	mb();
 }
+#endif
 
 /*
  * This function will be called by secondary cpus or by kexec cpu
@@ -445,7 +447,9 @@
 	crash_kexec_prepare_cpus(crashing_cpu);
 	cpu_set(crashing_cpu, cpus_in_crash);
 	crash_kexec_stop_spus();
+#ifdef CONFIG_PPC_STD_MMU_64
 	crash_kexec_wait_realmode(crashing_cpu);
+#endif
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 0);
 }
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
new file mode 100644
index 0000000..beb4d78
--- /dev/null
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -0,0 +1,237 @@
+
+/* 1. Find the index of the entry we're executing in */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7, SPRN_PID0
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	match_TLB			/* skip if NPIDS != 3 */
+
+	mfspr	r7,SPRN_PID1
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7, SPRN_PID2
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* Fall through, we had to match */
+
+match_TLB:
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+	mfspr	r9,SPRN_TLB1CFG
+	andi.	r9,r9,0xfff
+	li	r6,0				/* Set Entry counter to 0 */
+1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r3,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r9				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate TLB0 */
+	li	r6,0x04
+	tlbivax 0,r6
+	TLBSYNC
+	/* Invalidate TLB1 */
+	li	r6,0x0c
+	tlbivax 0,r6
+	TLBSYNC
+
+/* 3. Setup a temp mapping and jump to it */
+	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
+	addi	r5, r5, 0x1
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+
+	/* grab and fixup the RPN */
+	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
+	rlwinm	r6,r6,25,27,31
+	li	r8,-1
+	addi	r6,r6,10
+	slw	r6,r8,r6	/* convert to mask */
+
+	bl	1f		/* Find our address */
+1:	mflr	r7
+
+	mfspr	r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r23,SPRN_MAS7
+#endif
+	and	r8,r6,r8
+	subfic	r9,r6,-4096
+	and	r9,r9,r7
+
+	or	r25,r8,r9
+	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+	/* Just modify the entry ID and EPN for the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
+	slwi	r6,r6,12
+	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS2
+	li	r7,0		/* temp EPN = 0 */
+	rlwimi	r7,r6,0,20,31
+	mtspr	SPRN_MAS2,r7
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+	xori	r6,r4,1
+	slwi	r6,r6,5		/* setup new context with other address space */
+	bl	1f		/* Find our address */
+1:	mflr	r9
+	rlwimi	r7,r9,0,20,31
+	addi	r7,r7,(2f - 1b)
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r6
+	rfi
+2:
+/* 4. Clear out PIDs & Search info */
+	li	r6,0
+	mtspr   SPRN_MAS6,r6
+	mtspr	SPRN_PID0,r6
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	2f				/* skip if NPIDS != 3 */
+
+	mtspr	SPRN_PID1,r6
+	mtspr	SPRN_PID2,r6
+
+/* 5. Invalidate mapping we started in */
+2:
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r6,SPRN_MAS1
+	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP	MAS2_M
+#else
+#define M_IF_SMP	0
+#endif
+
+#if defined(ENTRY_MAPPING_BOOT_SETUP)
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+	mtspr	SPRN_MAS0,r6
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
+	mtspr	SPRN_MAS1,r6
+	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
+	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
+	mtspr	SPRN_MAS2,r6
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+	lis	r6,(KERNELBASE & ~0xfff)@h
+	ori	r6,r6,(KERNELBASE & ~0xfff)@l
+
+#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
+/*
+ * 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
+ * mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
+ * will cover the first 2GiB of memory.
+ */
+
+	lis r10, (MAS1_VALID|MAS1_IPROT)@h
+	ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
+	li  r11, 0
+	li  r0, 8
+	mtctr   r0
+
+next_tlb_setup:
+	addi	r0, r11, 3
+	rlwinm  r0, r0, 16, 4, 15  // Compute esel
+	rlwinm  r9, r11, 28, 0, 3   // Compute [ER]PN
+	oris    r0, r0, (MAS0_TLBSEL(1))@h
+	mtspr   SPRN_MAS0,r0
+	mtspr   SPRN_MAS1,r10
+	mtspr   SPRN_MAS2,r9
+	ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr   SPRN_MAS3,r9
+	tlbwe
+	addi    r11, r11, 1
+	bdnz+   next_tlb_setup
+
+/* 7. Jump to our 1:1 mapping */
+	li	r6, 0
+
+#else
+	#error You need to specify the mapping or not use this at all.
+#endif
+
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	bl	1f			/* Find our address */
+1:	mflr	r9
+	rlwimi	r6,r9,0,20,31
+	addi	r6,r6,(2f - 1b)
+	add	r6, r6, r25
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r8,SPRN_MAS1
+	rlwinm	r8,r8,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r8
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index edd4a57..4faeba2 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -94,204 +94,10 @@
  */
 
 _ENTRY(__early_start)
-/* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
-invstr:	mflr	r6				/* Make it accessible */
-	mfmsr	r7
-	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
-	mfspr	r7, SPRN_PID0
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
 
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	match_TLB			/* skip if NPIDS != 3 */
-
-	mfspr	r7,SPRN_PID1
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-	mfspr	r7, SPRN_PID2
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* Fall through, we had to match */
-
-match_TLB:
-	mfspr	r7,SPRN_MAS0
-	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
-
-	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
-	oris	r7,r7,MAS1_IPROT@h
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-
-/* 2. Invalidate all entries except the entry we're executing in */
-	mfspr	r9,SPRN_TLB1CFG
-	andi.	r9,r9,0xfff
-	li	r6,0				/* Set Entry counter to 0 */
-1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r7,SPRN_MAS1
-	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
-	cmpw	r3,r6
-	beq	skpinv				/* Dont update the current execution TLB */
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-	isync
-skpinv:	addi	r6,r6,1				/* Increment */
-	cmpw	r6,r9				/* Are we done? */
-	bne	1b				/* If not, repeat */
-
-	/* Invalidate TLB0 */
-	li	r6,0x04
-	tlbivax 0,r6
-	TLBSYNC
-	/* Invalidate TLB1 */
-	li	r6,0x0c
-	tlbivax 0,r6
-	TLBSYNC
-
-/* 3. Setup a temp mapping and jump to it */
-	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
-	addi	r5, r5, 0x1
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-
-	/* grab and fixup the RPN */
-	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
-	rlwinm	r6,r6,25,27,31
-	li	r8,-1
-	addi	r6,r6,10
-	slw	r6,r8,r6	/* convert to mask */
-
-	bl	1f		/* Find our address */
-1:	mflr	r7
-
-	mfspr	r8,SPRN_MAS3
-#ifdef CONFIG_PHYS_64BIT
-	mfspr	r23,SPRN_MAS7
-#endif
-	and	r8,r6,r8
-	subfic	r9,r6,-4096
-	and	r9,r9,r7
-
-	or	r25,r8,r9
-	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
-
-	/* Just modify the entry ID and EPN for the temp mapping */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
-	slwi	r6,r6,12
-	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
-	mtspr	SPRN_MAS1,r6
-	mfspr	r6,SPRN_MAS2
-	li	r7,0		/* temp EPN = 0 */
-	rlwimi	r7,r6,0,20,31
-	mtspr	SPRN_MAS2,r7
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-	xori	r6,r4,1
-	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
-1:	mflr	r9
-	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,(2f - 1b)
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r6
-	rfi
-2:
-/* 4. Clear out PIDs & Search info */
-	li	r6,0
-	mtspr   SPRN_MAS6,r6
-	mtspr	SPRN_PID0,r6
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	2f				/* skip if NPIDS != 3 */
-
-	mtspr	SPRN_PID1,r6
-	mtspr	SPRN_PID2,r6
-
-/* 5. Invalidate mapping we started in */
-2:
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r6,SPRN_MAS1
-	rlwinm	r6,r6,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r6
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
-
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP	MAS2_M
-#else
-#define M_IF_SMP	0
-#endif
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
-	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
-	mtspr	SPRN_MAS0,r6
-	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
-	mtspr	SPRN_MAS1,r6
-	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
-	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
-	mtspr	SPRN_MAS2,r6
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
-	lis	r6,(KERNELBASE & ~0xfff)@h
-	ori	r6,r6,(KERNELBASE & ~0xfff)@l
-	lis	r7,MSR_KERNEL@h
-	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
-1:	mflr	r9
-	rlwimi	r6,r9,0,20,31
-	addi	r6,r6,(2f - 1b)
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r7
-	rfi				/* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
-2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r8,SPRN_MAS1
-	rlwinm	r8,r8,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r8
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
+#define ENTRY_MAPPING_BOOT_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_BOOT_SETUP
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 8043d1b..dc66d52 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -711,6 +711,22 @@
 	/* r4 = reboot_code_buffer */
 	/* r5 = start_address      */
 
+#ifdef CONFIG_FSL_BOOKE
+
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+#define ENTRY_MAPPING_KEXEC_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_KEXEC_SETUP
+
+	mr      r3, r29
+	mr      r4, r30
+	mr      r5, r31
+
+	li	r0, 0
+#else
 	li	r0, 0
 
 	/*
@@ -727,6 +743,7 @@
 	rfi
 
 1:
+#endif
 	/* from this point address translation is turned off */
 	/* and interrupts are disabled */
 
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index bc9f39d..3b4dcc8 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -101,7 +101,7 @@
 EXPORT_SYMBOL(start_thread);
 EXPORT_SYMBOL(kernel_thread);
 
-#ifndef CONFIG_BOOKE
+#ifdef CONFIG_PPC_FPU
 EXPORT_SYMBOL_GPL(cvt_df);
 EXPORT_SYMBOL_GPL(cvt_fd);
 #endif
diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S
new file mode 100644
index 0000000..11a3930
--- /dev/null
+++ b/arch/powerpc/kernel/swsusp_booke.S
@@ -0,0 +1,193 @@
+/*
+ * Based on swsusp_32.S, modified for FSL BookE by
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Copyright (c) 2009-2010 MontaVista Software, LLC.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_SP		0
+#define SL_PC		4
+#define SL_MSR		8
+#define SL_TCR		0xc
+#define SL_SPRG0	0x10
+#define SL_SPRG1	0x14
+#define SL_SPRG2	0x18
+#define SL_SPRG3	0x1c
+#define SL_SPRG4	0x20
+#define SL_SPRG5	0x24
+#define SL_SPRG6	0x28
+#define SL_SPRG7	0x2c
+#define SL_TBU		0x30
+#define SL_TBL		0x34
+#define SL_R2		0x38
+#define SL_CR		0x3c
+#define SL_LR		0x40
+#define SL_R12		0x44	/* r12 to r31 */
+#define SL_SIZE		(SL_R12 + 80)
+
+	.section .data
+	.align	5
+
+_GLOBAL(swsusp_save_area)
+	.space	SL_SIZE
+
+
+	.section .text
+	.align	5
+
+_GLOBAL(swsusp_arch_suspend)
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	mflr	r0
+	stw	r0,SL_LR(r11)
+	mfcr	r0
+	stw	r0,SL_CR(r11)
+	stw	r1,SL_SP(r11)
+	stw	r2,SL_R2(r11)
+	stmw	r12,SL_R12(r11)
+
+	/* Save MSR & TCR */
+	mfmsr	r4
+	stw	r4,SL_MSR(r11)
+	mfspr	r4,SPRN_TCR
+	stw	r4,SL_TCR(r11)
+
+	/* Get a stable timebase and save it */
+1:	mfspr	r4,SPRN_TBRU
+	stw	r4,SL_TBU(r11)
+	mfspr	r5,SPRN_TBRL
+	stw	r5,SL_TBL(r11)
+	mfspr	r3,SPRN_TBRU
+	cmpw	r3,r4
+	bne	1b
+
+	/* Save SPRGs */
+	mfsprg	r4,0
+	stw	r4,SL_SPRG0(r11)
+	mfsprg	r4,1
+	stw	r4,SL_SPRG1(r11)
+	mfsprg	r4,2
+	stw	r4,SL_SPRG2(r11)
+	mfsprg	r4,3
+	stw	r4,SL_SPRG3(r11)
+	mfsprg	r4,4
+	stw	r4,SL_SPRG4(r11)
+	mfsprg	r4,5
+	stw	r4,SL_SPRG5(r11)
+	mfsprg	r4,6
+	stw	r4,SL_SPRG6(r11)
+	mfsprg	r4,7
+	stw	r4,SL_SPRG7(r11)
+
+	/* Call the low level suspend stuff (we should probably have made
+	 * a stackframe...
+	 */
+	bl	swsusp_save
+
+	/* Restore LR from the save area */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	blr
+
+_GLOBAL(swsusp_arch_resume)
+	sync
+
+	/* Load ptr the list of pages to copy in r3 */
+	lis	r11,(restore_pblist)@h
+	ori	r11,r11,restore_pblist@l
+	lwz	r3,0(r11)
+
+	/* Copy the pages. This is a very basic implementation, to
+	 * be replaced by something more cache efficient */
+1:
+	li	r0,256
+	mtctr	r0
+	lwz	r5,pbe_address(r3)	/* source */
+	lwz	r6,pbe_orig_address(r3)	/* destination */
+2:
+	lwz	r8,0(r5)
+	lwz	r9,4(r5)
+	lwz	r10,8(r5)
+	lwz	r11,12(r5)
+	addi	r5,r5,16
+	stw	r8,0(r6)
+	stw	r9,4(r6)
+	stw	r10,8(r6)
+	stw	r11,12(r6)
+	addi	r6,r6,16
+	bdnz	2b
+	lwz	r3,pbe_next(r3)
+	cmpwi	0,r3,0
+	bne	1b
+
+	bl flush_dcache_L1
+	bl flush_instruction_cache
+
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	lwz	r4,SL_SPRG0(r11)
+	mtsprg	0,r4
+	lwz	r4,SL_SPRG1(r11)
+	mtsprg	1,r4
+	lwz	r4,SL_SPRG2(r11)
+	mtsprg	2,r4
+	lwz	r4,SL_SPRG3(r11)
+	mtsprg	3,r4
+	lwz	r4,SL_SPRG4(r11)
+	mtsprg	4,r4
+	lwz	r4,SL_SPRG5(r11)
+	mtsprg	5,r4
+	lwz	r4,SL_SPRG6(r11)
+	mtsprg	6,r4
+	lwz	r4,SL_SPRG7(r11)
+	mtsprg	7,r4
+
+	/* restore the MSR */
+	lwz	r3,SL_MSR(r11)
+	mtmsr	r3
+
+	/* Restore TB */
+	li	r3,0
+	mtspr	SPRN_TBWL,r3
+	lwz	r3,SL_TBU(r11)
+	lwz	r4,SL_TBL(r11)
+	mtspr	SPRN_TBWU,r3
+	mtspr	SPRN_TBWL,r4
+
+	/* Restore TCR and clear any pending bits in TSR. */
+	lwz	r4,SL_TCR(r11)
+	mtspr	SPRN_TCR,r4
+	lis	r4, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h
+	mtspr	SPRN_TSR,r4
+
+	/* Kick decrementer */
+	li	r0,1
+	mtdec	r0
+
+	/* Restore the callee-saved registers and return */
+	lwz	r0,SL_CR(r11)
+	mtcr	r0
+	lwz	r2,SL_R2(r11)
+	lmw	r12,SL_R12(r11)
+	lwz	r1,SL_SP(r11)
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	li	r3,0
+	blr
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 3031fc7..25fc339 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *  Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -305,7 +306,7 @@
 #ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
 #else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR) & MCSR_MASK)
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
 #endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
@@ -421,6 +422,91 @@
 	return 0;
 }
 #elif defined(CONFIG_E500)
+int machine_check_e500mc(struct pt_regs *regs)
+{
+	unsigned long mcsr = mfspr(SPRN_MCSR);
+	unsigned long reason = mcsr;
+	int recoverable = 1;
+
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from MCSR=%lx): ", reason);
+
+	if (reason & MCSR_MCP)
+		printk("Machine Check Signal\n");
+
+	if (reason & MCSR_ICPERR) {
+		printk("Instruction Cache Parity Error\n");
+
+		/*
+		 * This is recoverable by invalidating the i-cache.
+		 */
+		mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI);
+		while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI)
+			;
+
+		/*
+		 * This will generally be accompanied by an instruction
+		 * fetch error report -- only treat MCSR_IF as fatal
+		 * if it wasn't due to an L1 parity error.
+		 */
+		reason &= ~MCSR_IF;
+	}
+
+	if (reason & MCSR_DCPERR_MC) {
+		printk("Data Cache Parity Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_L2MMU_MHIT) {
+		printk("Hit on multiple TLB entries\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_NMI)
+		printk("Non-maskable interrupt\n");
+
+	if (reason & MCSR_IF) {
+		printk("Instruction Fetch Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LD) {
+		printk("Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_ST) {
+		printk("Store Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LDG) {
+		printk("Guarded Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_TLBSYNC)
+		printk("Simultaneous tlbsync operations\n");
+
+	if (reason & MCSR_BSL2_ERR) {
+		printk("Level 2 Cache Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_MAV) {
+		u64 addr;
+
+		addr = mfspr(SPRN_MCAR);
+		addr |= (u64)mfspr(SPRN_MCARU) << 32;
+
+		printk("Machine Check %s Address: %#llx\n",
+		       reason & MCSR_MEA ? "Effective" : "Physical", addr);
+	}
+
+	mtspr(SPRN_MCSR, mcsr);
+	return mfspr(SPRN_MCSR) == 0 && recoverable;
+}
+
 int machine_check_e500(struct pt_regs *regs)
 {
 	unsigned long reason = get_mc_reason(regs);
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index eeba0a7..69d668c 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -171,6 +171,17 @@
 	help
 	  This option enables support for the IBM ISS simulation environment
 
+config ICON
+	bool "Icon"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 440SPe
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index e8c23cc..5f7a29d 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -61,7 +61,8 @@
 	"amcc,redwood",
 	"amcc,sequoia",
 	"amcc,taishan",
-	"amcc,yosemite"
+	"amcc,yosemite",
+	"mosaixtech,icon"
 };
 
 static int __init ppc44x_probe(void)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index f0684c8..8fe87fc 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
  *
@@ -154,6 +154,10 @@
  * Setup the architecture
  *
  */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+
 static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
@@ -194,6 +198,10 @@
 	}
 #endif
 
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -271,9 +279,49 @@
 						BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 			}
 
+		} else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST     (0x1 << 5)
+			/* Reset Micrel PHY */
+			clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+			setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 		}
+
 		iounmap(bcsr_regs);
 	}
+
+	if (machine_is(p1021_mds)) {
+#define MPC85xx_PMUXCR_OFFSET           0x60
+#define MPC85xx_PMUXCR_QE0              0x00008000
+#define MPC85xx_PMUXCR_QE3              0x00001000
+#define MPC85xx_PMUXCR_QE9              0x00000040
+#define MPC85xx_PMUXCR_QE12             0x00000008
+		static __be32 __iomem *pmuxcr;
+
+		np = of_find_node_by_name(NULL, "global-utilities");
+
+		if (np) {
+			pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+			if (!pmuxcr)
+				printk(KERN_EMERG "Error: Alternate function"
+					" signal multiplex control register not"
+					" mapped!\n");
+			else
+			/* P1021 has pins muxed for QE and other functions. To
+			 * enable QE UEC mode, we need to set bit QE0 for UCC1
+			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			 * and QE12 for QE MII management singals in PMUXCR
+			 * register.
+			 */
+				setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+						  MPC85xx_PMUXCR_QE3 |
+						  MPC85xx_PMUXCR_QE9 |
+						  MPC85xx_PMUXCR_QE12);
+
+			of_node_put(np);
+		}
+
+	}
 #endif	/* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_SWIOTLB
@@ -330,6 +378,16 @@
 	{},
 };
 
+static struct of_device_id p1021_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -342,11 +400,22 @@
 
 	return 0;
 }
+
+static int __init p1021_publish_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, p1021_ids, NULL);
+
+	return 0;
+}
+
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_device_initcall(p1021_mds, p1021_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -366,7 +435,7 @@
 
 	mpic = mpic_alloc(np, r.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
-			MPIC_BROKEN_FRR_NIRQS,
+			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
@@ -380,7 +449,11 @@
 		if (!np)
 			return;
 	}
-	qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+	if (machine_is(p1021_mds))
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+	else
+		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
 	of_node_put(np);
 #endif				/* CONFIG_QUICC_ENGINE */
 }
@@ -426,3 +499,26 @@
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init p1021_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
+
+}
+
+define_machine(p1021_mds) {
+	.name		= "P1021 MDS",
+	.probe		= p1021_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
+
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index a7be144..0f5bee9 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc.
  *
  * Author: Tony Li <tony.li@freescale.com>
  *	   Jason Jin <Jason.jin@freescale.com>
@@ -22,14 +22,20 @@
 #include <asm/prom.h>
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
+#include <asm/mpic.h>
 #include "fsl_msi.h"
 
+LIST_HEAD(msi_head);
+
 struct fsl_msi_feature {
 	u32 fsl_pic_ip;
 	u32 msiir_offset;
 };
 
-static struct fsl_msi *fsl_msi;
+struct fsl_msi_cascade_data {
+	struct fsl_msi *msi_data;
+	int index;
+};
 
 static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
 {
@@ -54,10 +60,12 @@
 static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
 				irq_hw_number_t hw)
 {
+	struct fsl_msi *msi_data = h->host_data;
 	struct irq_chip *chip = &fsl_msi_chip;
 
 	irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
 
+	set_irq_chip_data(virq, msi_data);
 	set_irq_chip_and_handler(virq, chip, handle_edge_irq);
 
 	return 0;
@@ -96,11 +104,12 @@
 static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct msi_desc *entry;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
 		if (entry->irq == NO_IRQ)
 			continue;
+		msi_data = get_irq_data(entry->irq);
 		set_irq_msi(entry->irq, NULL);
 		msi_bitmap_free_hwirqs(&msi_data->bitmap,
 				       virq_to_hw(entry->irq), 1);
@@ -111,9 +120,10 @@
 }
 
 static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
-				  struct msi_msg *msg)
+				struct msi_msg *msg,
+				struct fsl_msi *fsl_msi_data)
 {
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data = fsl_msi_data;
 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
 	u32 base = 0;
 
@@ -130,14 +140,19 @@
 
 static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
-	int rc, hwirq;
+	int rc, hwirq = -ENOMEM;
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+		list_for_each_entry(msi_data, &msi_head, list) {
+			hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
+			if (hwirq >= 0)
+				break;
+		}
+
 		if (hwirq < 0) {
 			rc = hwirq;
 			pr_debug("%s: fail allocating msi interrupt\n",
@@ -154,25 +169,31 @@
 			rc = -ENOSPC;
 			goto out_free;
 		}
+		set_irq_data(virq, msi_data);
 		set_irq_msi(virq, entry);
 
-		fsl_compose_msi_msg(pdev, hwirq, &msg);
+		fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data);
 		write_msi_msg(virq, &msg);
 	}
 	return 0;
 
 out_free:
+	/* free by the caller of this function */
 	return rc;
 }
 
 static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq;
-	struct fsl_msi *msi_data = fsl_msi;
+	struct fsl_msi *msi_data;
 	int msir_index = -1;
 	u32 msir_value = 0;
 	u32 intr_index;
 	u32 have_shift = 0;
+	struct fsl_msi_cascade_data *cascade_data;
+
+	cascade_data = (struct fsl_msi_cascade_data *)get_irq_data(irq);
+	msi_data = cascade_data->msi_data;
 
 	raw_spin_lock(&desc->lock);
 	if ((msi_data->feature &  FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
@@ -187,13 +208,13 @@
 	if (unlikely(desc->status & IRQ_INPROGRESS))
 		goto unlock;
 
-	msir_index = (int)desc->handler_data;
+	msir_index = cascade_data->index;
 
 	if (msir_index >= NR_MSI_REG)
 		cascade_irq = NO_IRQ;
 
 	desc->status |= IRQ_INPROGRESS;
-	switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+	switch (msi_data->feature & FSL_PIC_IP_MASK) {
 	case FSL_PIC_IP_MPIC:
 		msir_value = fsl_msi_read(msi_data->msi_regs,
 			msir_index * 0x10);
@@ -229,6 +250,30 @@
 	raw_spin_unlock(&desc->lock);
 }
 
+static int fsl_of_msi_remove(struct of_device *ofdev)
+{
+	struct fsl_msi *msi = ofdev->dev.platform_data;
+	int virq, i;
+	struct fsl_msi_cascade_data *cascade_data;
+
+	if (msi->list.prev != NULL)
+		list_del(&msi->list);
+	for (i = 0; i < NR_MSI_REG; i++) {
+		virq = msi->msi_virqs[i];
+		if (virq != NO_IRQ) {
+			cascade_data = get_irq_data(virq);
+			kfree(cascade_data);
+			irq_dispose_mapping(virq);
+		}
+	}
+	if (msi->bitmap.bitmap)
+		msi_bitmap_free(&msi->bitmap);
+	iounmap(msi->msi_regs);
+	kfree(msi);
+
+	return 0;
+}
+
 static int __devinit fsl_of_msi_probe(struct of_device *dev,
 				const struct of_device_id *match)
 {
@@ -239,15 +284,18 @@
 	int virt_msir;
 	const u32 *p;
 	struct fsl_msi_feature *features = match->data;
+	struct fsl_msi_cascade_data *cascade_data = NULL;
+	int len;
+	u32 offset;
 
 	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
 
 	msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
 	if (!msi) {
 		dev_err(&dev->dev, "No memory for MSI structure\n");
-		err = -ENOMEM;
-		goto error_out;
+		return -ENOMEM;
 	}
+	dev->dev.platform_data = msi;
 
 	msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR,
 				      NR_MSI_IRQS, &fsl_msi_host_ops, 0);
@@ -298,27 +346,47 @@
 		err = -EINVAL;
 		goto error_out;
 	}
+	offset = 0;
+	p = of_get_property(dev->node, "msi-available-ranges", &len);
+	if (p)
+		offset = *p / IRQS_PER_MSI_REG;
 
 	count /= sizeof(u32);
-	for (i = 0; i < count / 2; i++) {
-		if (i > NR_MSI_REG)
-			break;
+	for (i = 0; i < min(count / 2, NR_MSI_REG); i++) {
 		virt_msir = irq_of_parse_and_map(dev->dev.of_node, i);
 		if (virt_msir != NO_IRQ) {
-			set_irq_data(virt_msir, (void *)i);
+			cascade_data = kzalloc(
+					sizeof(struct fsl_msi_cascade_data),
+					GFP_KERNEL);
+			if (!cascade_data) {
+				dev_err(&dev->dev,
+					"No memory for MSI cascade data\n");
+				err = -ENOMEM;
+				goto error_out;
+			}
+			msi->msi_virqs[i] = virt_msir;
+			cascade_data->index = i + offset;
+			cascade_data->msi_data = msi;
+			set_irq_data(virt_msir, (void *)cascade_data);
 			set_irq_chained_handler(virt_msir, fsl_msi_cascade);
 		}
 	}
 
-	fsl_msi = msi;
+	list_add_tail(&msi->list, &msi_head);
 
-	WARN_ON(ppc_md.setup_msi_irqs);
-	ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
-	ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
-	ppc_md.msi_check_device = fsl_msi_check_device;
+	/* The multiple setting ppc_md.setup_msi_irqs will not harm things */
+	if (!ppc_md.setup_msi_irqs) {
+		ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+		ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+		ppc_md.msi_check_device = fsl_msi_check_device;
+	} else if (ppc_md.setup_msi_irqs != fsl_setup_msi_irqs) {
+		dev_err(&dev->dev, "Different MSI driver already installed!\n");
+		err = -ENODEV;
+		goto error_out;
+	}
 	return 0;
 error_out:
-	kfree(msi);
+	fsl_of_msi_remove(dev);
 	return err;
 }
 
@@ -351,6 +419,7 @@
 		.of_match_table = fsl_of_msi_ids,
 	},
 	.probe = fsl_of_msi_probe,
+	.remove = fsl_of_msi_remove,
 };
 
 static __init int fsl_of_msi_init(void)
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 331c7e7..624580c 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -32,8 +32,11 @@
 	u32 msi_addr_hi;
 	void __iomem *msi_regs;
 	u32 feature;
+	int msi_virqs[NR_MSI_REG];
 
 	struct msi_bitmap bitmap;
+
+	struct list_head list;          /* support multiple MSI banks */
 };
 
 #endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 106d767..156aa7d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -974,6 +974,123 @@
 	.setup_utl	= ppc460ex_pciex_init_utl,
 };
 
+static int __init ppc460sx_pciex_core_init(struct device_node *np)
+{
+	/* HSS drive amplitude */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211);
+
+	/* HSS TX pre-emphasis */
+	mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987);
+
+	mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987);
+	mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987);
+
+	/* HSS TX calibration control */
+	mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222);
+	mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000);
+	mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000);
+
+	/* HSS TX slew control */
+	mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF);
+	mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
+	mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
+
+	udelay(100);
+
+	/* De-assert PLLRESET */
+	dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0);
+
+	/* Reset DL, UTL, GPL before configuration */
+	mtdcri(SDR0, PESDR0_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR1_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+	mtdcri(SDR0, PESDR2_460SX_RCSSET,
+			PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU);
+
+	udelay(100);
+
+	/*
+	 * If bifurcation is not enabled, u-boot would have disabled the
+	 * third PCIe port
+	 */
+	if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) ==
+				0x00000001)) {
+		printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
+		printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
+		return 3;
+	}
+
+	printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
+	return 2;
+}
+
+static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+
+	if (port->endpoint)
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0x01000000, 0);
+	else
+		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
+				0, 0x01000000);
+
+	/*Gen-1*/
+	mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
+
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
+			PESDRx_RCSSET_RSTPYN);
+
+	port->has_ibpre = 1;
+
+	return 0;
+}
+
+static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	/* Max 128 Bytes */
+	out_be32 (port->utl_base + PEUTL_PBBSZ,   0x00000000);
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+	.core_init	= ppc460sx_pciex_core_init,
+	.port_init_hw	= ppc460sx_pciex_init_port_hw,
+	.setup_utl	= ppc460sx_pciex_init_utl,
+};
+
 #endif /* CONFIG_44x */
 
 #ifdef CONFIG_40x
@@ -1089,6 +1206,8 @@
 	}
 	if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
 		ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
+	if (of_device_is_compatible(np, "ibm,plb-pciex-460sx"))
+		ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops;
 #endif /* CONFIG_44x    */
 #ifdef CONFIG_40x
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index d04e40b..56d9e5d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -324,6 +324,64 @@
 #define PESDR0_460EX_IHS2		0x036D
 
 /*
+ * 460SX addtional DCRs
+ */
+#define PESDRn_460SX_RCEI		0x02
+
+#define PESDR0_460SX_HSSL0DAMP		0x320
+#define PESDR0_460SX_HSSL1DAMP		0x321
+#define PESDR0_460SX_HSSL2DAMP		0x322
+#define PESDR0_460SX_HSSL3DAMP		0x323
+#define PESDR0_460SX_HSSL4DAMP		0x324
+#define PESDR0_460SX_HSSL5DAMP		0x325
+#define PESDR0_460SX_HSSL6DAMP		0x326
+#define PESDR0_460SX_HSSL7DAMP		0x327
+
+#define PESDR1_460SX_HSSL0DAMP		0x354
+#define PESDR1_460SX_HSSL1DAMP		0x355
+#define PESDR1_460SX_HSSL2DAMP		0x356
+#define PESDR1_460SX_HSSL3DAMP		0x357
+
+#define PESDR2_460SX_HSSL0DAMP		0x384
+#define PESDR2_460SX_HSSL1DAMP		0x385
+#define PESDR2_460SX_HSSL2DAMP		0x386
+#define PESDR2_460SX_HSSL3DAMP		0x387
+
+#define PESDR0_460SX_HSSL0COEFA		0x328
+#define PESDR0_460SX_HSSL1COEFA		0x329
+#define PESDR0_460SX_HSSL2COEFA		0x32A
+#define PESDR0_460SX_HSSL3COEFA		0x32B
+#define PESDR0_460SX_HSSL4COEFA		0x32C
+#define PESDR0_460SX_HSSL5COEFA		0x32D
+#define PESDR0_460SX_HSSL6COEFA		0x32E
+#define PESDR0_460SX_HSSL7COEFA		0x32F
+
+#define PESDR1_460SX_HSSL0COEFA		0x358
+#define PESDR1_460SX_HSSL1COEFA		0x359
+#define PESDR1_460SX_HSSL2COEFA		0x35A
+#define PESDR1_460SX_HSSL3COEFA		0x35B
+
+#define PESDR2_460SX_HSSL0COEFA		0x388
+#define PESDR2_460SX_HSSL1COEFA		0x389
+#define PESDR2_460SX_HSSL2COEFA		0x38A
+#define PESDR2_460SX_HSSL3COEFA		0x38B
+
+#define PESDR0_460SX_HSSL1CALDRV	0x339
+#define PESDR1_460SX_HSSL1CALDRV	0x361
+#define PESDR2_460SX_HSSL1CALDRV	0x391
+
+#define PESDR0_460SX_HSSSLEW		0x338
+#define PESDR1_460SX_HSSSLEW		0x360
+#define PESDR2_460SX_HSSSLEW		0x390
+
+#define PESDR0_460SX_HSSCTLSET		0x31E
+#define PESDR1_460SX_HSSCTLSET		0x352
+#define PESDR2_460SX_HSSCTLSET		0x382
+
+#define PESDR0_460SX_RCSSET		0x304
+#define PESDR1_460SX_RCSSET		0x344
+#define PESDR2_460SX_RCSSET		0x374
+/*
  * Of the above, some are common offsets from the base
  */
 #define PESDRn_UTLSET1			0x00