Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (48 commits)
[PATCH] bonding: update version number
[PATCH] git-netdev-all: pc300_tty build fix
[PATCH] Make PC300 WAN driver compile again
[PATCH] Modularize generic HDLC
[PATCH] more s2io __iomem annotations
[PATCH] restore __iomem annotations in e1000
[PATCH] 64bit bugs in s2io
[PATCH] bonding: Fix primary selection error at enslavement time
[PATCH] bonding: Don't mangle LACPDUs
[PATCH] bonding: Validate probe replies in ARP monitor
[PATCH] bonding: Don't release slaves when master is admin down
[PATCH] bonding: Add priv_flag to avoid event mishandling
[PATCH] bonding: Handle large hard_header_len
[PATCH] bonding: Remove unneeded NULL test
[PATCH] bonding: Format fix in seq_printf call
[PATCH] bonding: Convert delay value from s16 to int
[PATCH] bonding: Allow bonding to enslave a 10 Gig adapter
Delete unused drivers/net/gt64240eth.h
[PATCH] skge: fiber support
[PATCH] fix possible NULL ptr deref in forcedeth
...
diff --git a/Documentation/ABI/obsolete/devfs b/Documentation/ABI/removed/devfs
similarity index 72%
rename from Documentation/ABI/obsolete/devfs
rename to Documentation/ABI/removed/devfs
index b8b8739..8195c4e 100644
--- a/Documentation/ABI/obsolete/devfs
+++ b/Documentation/ABI/removed/devfs
@@ -1,13 +1,12 @@
What: devfs
-Date: July 2005
+Date: July 2005 (scheduled), finally removed in kernel v2.6.18
Contact: Greg Kroah-Hartman <gregkh@suse.de>
Description:
devfs has been unmaintained for a number of years, has unfixable
races, contains a naming policy within the kernel that is
against the LSB, and can be replaced by using udev.
- The files fs/devfs/*, include/linux/devfs_fs*.h will be removed,
+ The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
along with the the assorted devfs function calls throughout the
kernel tree.
Users:
-
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
new file mode 100644
index 0000000..d882f80
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-power
@@ -0,0 +1,88 @@
+What: /sys/power/
+Date: August 2006
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power directory will contain files that will
+ provide a unified interface to the power management
+ subsystem.
+
+What: /sys/power/state
+Date: August 2006
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power/state file controls the system power state.
+ Reading from this file returns what states are supported,
+ which is hard-coded to 'standby' (Power-On Suspend), 'mem'
+ (Suspend-to-RAM), and 'disk' (Suspend-to-Disk).
+
+ Writing to this file one of these strings causes the system to
+ transition into that state. Please see the file
+ Documentation/power/states.txt for a description of each of
+ these states.
+
+What: /sys/power/disk
+Date: August 2006
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power/disk file controls the operating mode of the
+ suspend-to-disk mechanism. Reading from this file returns
+ the name of the method by which the system will be put to
+ sleep on the next suspend. There are four methods supported:
+ 'firmware' - means that the memory image will be saved to disk
+ by some firmware, in which case we also assume that the
+ firmware will handle the system suspend.
+ 'platform' - the memory image will be saved by the kernel and
+ the system will be put to sleep by the platform driver (e.g.
+ ACPI or other PM registers).
+ 'shutdown' - the memory image will be saved by the kernel and
+ the system will be powered off.
+ 'reboot' - the memory image will be saved by the kernel and
+ the system will be rebooted.
+
+ The suspend-to-disk method may be chosen by writing to this
+ file one of the accepted strings:
+
+ 'firmware'
+ 'platform'
+ 'shutdown'
+ 'reboot'
+
+ It will only change to 'firmware' or 'platform' if the system
+ supports that.
+
+What: /sys/power/image_size
+Date: August 2006
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power/image_size file controls the size of the image
+ created by the suspend-to-disk mechanism. It can be written a
+ string representing a non-negative integer that will be used
+ as an upper limit of the image size, in bytes. The kernel's
+ suspend-to-disk code will do its best to ensure the image size
+ will not exceed this number. However, if it turns out to be
+ impossible, the kernel will try to suspend anyway using the
+ smallest image possible. In particular, if "0" is written to
+ this file, the suspend image will be as small as possible.
+
+ Reading from this file will display the current image size
+ limit, which is set to 500 MB by default.
+
+What: /sys/power/pm_trace
+Date: August 2006
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power/pm_trace file controls the code which saves the
+ last PM event point in the RTC across reboots, so that you can
+ debug a machine that just hangs during suspend (or more
+ commonly, during resume). Namely, the RTC is only used to save
+ the last PM event point if this file contains '1'. Initially
+ it contains '0' which may be changed to '1' by writing a
+ string representing a nonzero integer into it.
+
+ To use this debugging feature you should attempt to suspend
+ the machine, then reboot it and run
+
+ dmesg -s 1000000 | grep 'hash matches'
+
+ CAUTION: Using it will cause your machine's real-time (CMOS)
+ clock to be set to a random invalid time after a resume.
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index 320af25..3608472 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -43,59 +43,52 @@
<para>A Universal Serial Bus (USB) is used to connect a host,
such as a PC or workstation, to a number of peripheral
- devices. USB uses a tree structure, with the host at the
+ devices. USB uses a tree structure, with the host as the
root (the system's master), hubs as interior nodes, and
- peripheral devices as leaves (and slaves).
+ peripherals as leaves (and slaves).
Modern PCs support several such trees of USB devices, usually
one USB 2.0 tree (480 Mbit/sec each) with
a few USB 1.1 trees (12 Mbit/sec each) that are used when you
connect a USB 1.1 device directly to the machine's "root hub".
</para>
- <para>That master/slave asymmetry was designed in part for
- ease of use. It is not physically possible to assemble
- (legal) USB cables incorrectly: all upstream "to-the-host"
- connectors are the rectangular type, matching the sockets on
- root hubs, and the downstream type are the squarish type
- (or they are built in to the peripheral).
- Software doesn't need to deal with distributed autoconfiguration
- since the pre-designated master node manages all that.
- At the electrical level, bus protocol overhead is reduced by
- eliminating arbitration and moving scheduling into host software.
+ <para>That master/slave asymmetry was designed-in for a number of
+ reasons, one being ease of use. It is not physically possible to
+ assemble (legal) USB cables incorrectly: all upstream "to the host"
+ connectors are the rectangular type (matching the sockets on
+ root hubs), and all downstream connectors are the squarish type
+ (or they are built into the peripheral).
+ Also, the host software doesn't need to deal with distributed
+ auto-configuration since the pre-designated master node manages all that.
+ And finally, at the electrical level, bus protocol overhead is reduced by
+ eliminating arbitration and moving scheduling into the host software.
</para>
- <para>USB 1.0 was announced in January 1996, and was revised
+ <para>USB 1.0 was announced in January 1996 and was revised
as USB 1.1 (with improvements in hub specification and
support for interrupt-out transfers) in September 1998.
- USB 2.0 was released in April 2000, including high speed
- transfers and transaction translating hubs (used for USB 1.1
+ USB 2.0 was released in April 2000, adding high-speed
+ transfers and transaction-translating hubs (used for USB 1.1
and 1.0 backward compatibility).
</para>
- <para>USB support was added to Linux early in the 2.2 kernel series
- shortly before the 2.3 development forked off. Updates
- from 2.3 were regularly folded back into 2.2 releases, bringing
- new features such as <filename>/sbin/hotplug</filename> support,
- more drivers, and more robustness.
- The 2.5 kernel series continued such improvements, and also
- worked on USB 2.0 support,
- higher performance,
- better consistency between host controller drivers,
- API simplification (to make bugs less likely),
- and providing internal "kerneldoc" documentation.
+ <para>Kernel developers added USB support to Linux early in the 2.2 kernel
+ series, shortly before 2.3 development forked. Updates from 2.3 were
+ regularly folded back into 2.2 releases, which improved reliability and
+ brought <filename>/sbin/hotplug</filename> support as well more drivers.
+ Such improvements were continued in the 2.5 kernel series, where they added
+ USB 2.0 support, improved performance, and made the host controller drivers
+ (HCDs) more consistent. They also simplified the API (to make bugs less
+ likely) and added internal "kerneldoc" documentation.
</para>
<para>Linux can run inside USB devices as well as on
the hosts that control the devices.
- Because the Linux 2.x USB support evolved to support mass market
- platforms such as Apple Macintosh or PC-compatible systems,
- it didn't address design concerns for those types of USB systems.
- So it can't be used inside mass-market PDAs, or other peripherals.
- USB device drivers running inside those Linux peripherals
+ But USB device drivers running inside those peripherals
don't do the same things as the ones running inside hosts,
- and so they've been given a different name:
- they're called <emphasis>gadget drivers</emphasis>.
- This document does not present gadget drivers.
+ so they've been given a different name:
+ <emphasis>gadget drivers</emphasis>.
+ This document does not cover gadget drivers.
</para>
</chapter>
@@ -103,17 +96,14 @@
<chapter id="host">
<title>USB Host-Side API Model</title>
- <para>Within the kernel,
- host-side drivers for USB devices talk to the "usbcore" APIs.
- There are two types of public "usbcore" APIs, targetted at two different
- layers of USB driver. Those are
- <emphasis>general purpose</emphasis> drivers, exposed through
- driver frameworks such as block, character, or network devices;
- and drivers that are <emphasis>part of the core</emphasis>,
- which are involved in managing a USB bus.
- Such core drivers include the <emphasis>hub</emphasis> driver,
- which manages trees of USB devices, and several different kinds
- of <emphasis>host controller driver (HCD)</emphasis>,
+ <para>Host-side drivers for USB devices talk to the "usbcore" APIs.
+ There are two. One is intended for
+ <emphasis>general-purpose</emphasis> drivers (exposed through
+ driver frameworks), and the other is for drivers that are
+ <emphasis>part of the core</emphasis>.
+ Such core drivers include the <emphasis>hub</emphasis> driver
+ (which manages trees of USB devices) and several different kinds
+ of <emphasis>host controller drivers</emphasis>,
which control individual busses.
</para>
@@ -122,21 +112,21 @@
<itemizedlist>
- <listitem><para>USB supports four kinds of data transfer
- (control, bulk, interrupt, and isochronous). Two transfer
- types use bandwidth as it's available (control and bulk),
- while the other two types of transfer (interrupt and isochronous)
+ <listitem><para>USB supports four kinds of data transfers
+ (control, bulk, interrupt, and isochronous). Two of them (control
+ and bulk) use bandwidth as it's available,
+ while the other two (interrupt and isochronous)
are scheduled to provide guaranteed bandwidth.
</para></listitem>
<listitem><para>The device description model includes one or more
"configurations" per device, only one of which is active at a time.
- Devices that are capable of high speed operation must also support
- full speed configurations, along with a way to ask about the
- "other speed" configurations that might be used.
+ Devices that are capable of high-speed operation must also support
+ full-speed configurations, along with a way to ask about the
+ "other speed" configurations which might be used.
</para></listitem>
- <listitem><para>Configurations have one or more "interface", each
+ <listitem><para>Configurations have one or more "interfaces", each
of which may have "alternate settings". Interfaces may be
standardized by USB "Class" specifications, or may be specific to
a vendor or device.</para>
@@ -162,7 +152,7 @@
</para></listitem>
<listitem><para>The Linux USB API supports synchronous calls for
- control and bulk messaging.
+ control and bulk messages.
It also supports asynchnous calls for all kinds of data transfer,
using request structures called "URBs" (USB Request Blocks).
</para></listitem>
@@ -463,14 +453,25 @@
file in your Linux kernel sources.
</para>
- <para>Otherwise the main use for this file from programs
- is to poll() it to get notifications of usb devices
- as they're plugged or unplugged.
- To see what changed, you'd need to read the file and
- compare "before" and "after" contents, scan the filesystem,
- or see its hotplug event.
- </para>
+ <para>This file, in combination with the poll() system call, can
+ also be used to detect when devices are added or removed:
+<programlisting>int fd;
+struct pollfd pfd;
+fd = open("/proc/bus/usb/devices", O_RDONLY);
+pfd = { fd, POLLIN, 0 };
+for (;;) {
+ /* The first time through, this call will return immediately. */
+ poll(&pfd, 1, -1);
+
+ /* To see what's changed, compare the file's previous and current
+ contents or scan the filesystem. (Scanning is more precise.) */
+}</programlisting>
+ Note that this behavior is intended to be used for informational
+ and debug purposes. It would be more appropriate to use programs
+ such as udev or HAL to initialize a device or start a user-mode
+ helper program, for instance.
+ </para>
</sect1>
<sect1>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 915ae8c..1d65604 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -358,7 +358,8 @@
quilt trees:
- USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
-
+ - x86-64, partly i386, Andi Kleen <ak@suse.de>
+ ftp.firstfloor.org:/pub/ak/x86_64/quilt/
Bug Reporting
-------------
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 66c725f..addc67b 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -2543,6 +2543,9 @@
64 = /dev/usb/rio500 Diamond Rio 500
65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
+ 67 = /dev/usb/adutux0 1st Ontrak ADU device
+ ...
+ 76 = /dev/usb/adutux10 10th Ontrak ADU device
96 = /dev/usb/hiddev0 1st USB HID device
...
111 = /dev/usb/hiddev15 16th USB HID device
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 552507f..436697c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,21 @@
---------------------------
+What: /sys/devices/.../power/state
+ dev->power.power_state
+ dpm_runtime_{suspend,resume)()
+When: July 2007
+Why: Broken design for runtime control over driver power states, confusing
+ driver-internal runtime power management with: mechanisms to support
+ system-wide sleep state transitions; event codes that distinguish
+ different phases of swsusp "sleep" transitions; and userspace policy
+ inputs. This framework was never widely used, and most attempts to
+ use it were broken. Drivers should instead be exposing domain-specific
+ interfaces either to kernel or to userspace.
+Who: Pavel Machek <pavel@suse.cz>
+
+---------------------------
+
What: RAW driver (CONFIG_RAW_DRIVER)
When: December 2005
Why: declared obsolete since kernel 2.6.3
@@ -55,6 +70,18 @@
---------------------------
+What: sys_sysctl
+When: January 2007
+Why: The same information is available through /proc/sys and that is the
+ interface user space prefers to use. And there do not appear to be
+ any existing user in user space of sys_sysctl. The additional
+ maintenance overhead of keeping a set of binary names gets
+ in the way of doing a good job of maintaining this interface.
+
+Who: Eric Biederman <ebiederm@xmission.com>
+
+---------------------------
+
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
@@ -202,14 +229,6 @@
---------------------------
-What: Support for the MIPS EV96100 evaluation board
-When: September 2006
-Why: Does no longer build since at least November 15, 2003, apparently
- no userbase left.
-Who: Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
What: Support for the Momentum / PMC-Sierra Jaguar ATX evaluation board
When: September 2006
Why: Does no longer build since quite some time, and was never popular,
@@ -294,3 +313,24 @@
It is not clear if anyone is still using it.
Who: Stephen Hemminger <shemminger@osdl.org>
+---------------------------
+
+
+What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When: Oktober 2008
+Why: The stacking of class devices makes these values misleading and
+ inconsistent.
+ Class devices should not carry any of these properties, and bus
+ devices have SUBSYTEM and DRIVER as a replacement.
+Who: Kay Sievers <kay.sievers@suse.de>
+
+---------------------------
+
+What: i2c-isa
+When: December 2006
+Why: i2c-isa is a non-sense and doesn't fit in the device driver
+ model. Drivers relying on it are better implemented as platform
+ drivers.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 99902ae6..7db71d6 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1124,11 +1124,15 @@
NMI switch that most IA32 servers have fires unknown NMI up, for example.
If a system hangs up, try pressing the NMI switch.
-[NOTE]
- This function and oprofile share a NMI callback. Therefore this function
- cannot be enabled when oprofile is activated.
- And NMI watchdog will be disabled when the value in this file is set to
- non-zero.
+nmi_watchdog
+------------
+
+Enables/Disables the NMI watchdog on x86 systems. When the value is non-zero
+the NMI watchdog is enabled and will continuously test all online cpus to
+determine whether or not they are still functioning properly.
+
+Because the NMI watchdog shares registers with oprofile, by disabling the NMI
+watchdog, oprofile may have more registers to utilize.
2.4 /proc/sys/vm - The virtual memory subsystem
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 1677566..2568034 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -7,9 +7,12 @@
* VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
- * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R
+ * VIA Technologies, Inc. VT8231, VT8233, VT8233A
Datasheet: available on request from VIA
+ * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251
+ Datasheet: available on request and under NDA from VIA
+
Authors:
Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -39,6 +42,8 @@
device 1106:8235 (VT8231 function 4)
device 1106:3177 (VT8235)
device 1106:3227 (VT8237R)
+ device 1106:3337 (VT8237A)
+ device 1106:3287 (VT8251)
If none of these show up, you should look in the BIOS for settings like
enable ACPI / SMBus or even USB.
diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub
index d6dcb13..9cc081e 100644
--- a/Documentation/i2c/i2c-stub
+++ b/Documentation/i2c/i2c-stub
@@ -6,9 +6,12 @@
types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, and
(r/w) word data.
+You need to provide a chip address as a module parameter when loading
+this driver, which will then only react to SMBus commands to this address.
+
No hardware is needed nor associated with this module. It will accept write
-quick commands to all addresses; it will respond to the other commands (also
-to all addresses) by reading from or writing to an array in memory. It will
+quick commands to one address; it will respond to the other commands (also
+to one address) by reading from or writing to an array in memory. It will
also spam the kernel logs for every command it handles.
A pointer register with auto-increment is implemented for all byte
@@ -21,6 +24,11 @@
3. load the target sensors chip driver module
4. observe its behavior in the kernel log
+PARAMETERS:
+
+int chip_addr:
+ The SMBus address to emulate a chip at.
+
CAVEATS:
There are independent arrays for byte/data and word/data commands. Depending
@@ -33,6 +41,9 @@
chips) this module will not work well - although it could be extended to
support that pretty easily.
+Only one chip address is supported - although this module could be
+extended to support more.
+
If you spam it hard enough, printk can be lossy. This module really wants
something like relayfs.
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index b7d6abb..e2cbd59 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -421,6 +421,11 @@
The second argument is optional, and if supplied will be used
if first argument is not supported.
+ as-instr
+ as-instr checks if the assembler reports a specific instruction
+ and then outputs either option1 or option2
+ C escapes are supported in the test instruction
+
cc-option
cc-option is used to check if $(CC) supports a given option, and not
supported to use an optional second option.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 766abda..5498324 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -573,8 +573,6 @@
gscd= [HW,CD]
Format: <io>
- gt96100eth= [NET] MIPS GT96100 Advanced Communication Controller
-
gus= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma16>
@@ -1240,7 +1238,11 @@
bootloader. This is currently used on
IXP2000 systems where the bus has to be
configured a certain way for adjunct CPUs.
-
+ noearly [X86] Don't do any early type 1 scanning.
+ This might help on some broken boards which
+ machine check when some devices' config space
+ is read. But various workarounds are disabled
+ and some IOMMU drivers will not work.
pcmv= [HW,PCMCIA] BadgePAD 4
pd. [PARIDE]
@@ -1368,6 +1370,9 @@
Reserves a hole at the top of the kernel virtual
address space.
+ reset_devices [KNL] Force drivers to reset the underlying device
+ during initialization.
+
resume= [SWSUSP]
Specify the partition device for software suspend
diff --git a/Documentation/nommu-mmap.txt b/Documentation/nommu-mmap.txt
index b88ebe4..7714f57 100644
--- a/Documentation/nommu-mmap.txt
+++ b/Documentation/nommu-mmap.txt
@@ -116,6 +116,9 @@
(*) A list of all the mappings on the system is visible through /proc/maps in
no-MMU mode.
+ (*) A list of all the mappings in use by a process is visible through
+ /proc/<pid>/maps in no-MMU mode.
+
(*) Supplying MAP_FIXED or a requesting a particular mapping address will
result in an error.
@@ -125,6 +128,49 @@
error will result if they don't. This is most likely to be encountered
with character device files, pipes, fifos and sockets.
+
+==========================
+INTERPROCESS SHARED MEMORY
+==========================
+
+Both SYSV IPC SHM shared memory and POSIX shared memory is supported in NOMMU
+mode. The former through the usual mechanism, the latter through files created
+on ramfs or tmpfs mounts.
+
+
+=======
+FUTEXES
+=======
+
+Futexes are supported in NOMMU mode if the arch supports them. An error will
+be given if an address passed to the futex system call lies outside the
+mappings made by a process or if the mapping in which the address lies does not
+support futexes (such as an I/O chardev mapping).
+
+
+=============
+NO-MMU MREMAP
+=============
+
+The mremap() function is partially supported. It may change the size of a
+mapping, and may move it[*] if MREMAP_MAYMOVE is specified and if the new size
+of the mapping exceeds the size of the slab object currently occupied by the
+memory to which the mapping refers, or if a smaller slab object could be used.
+
+MREMAP_FIXED is not supported, though it is ignored if there's no change of
+address and the object does not need to be moved.
+
+Shared mappings may not be moved. Shareable mappings may not be moved either,
+even if they are not currently shared.
+
+The mremap() function must be given an exact match for base address and size of
+a previously mapped object. It may not be used to create holes in existing
+mappings, move parts of existing mappings or resize parts of mappings. It must
+act on a complete mapping.
+
+[*] Not currently supported.
+
+
============================================
PROVIDING SHAREABLE CHARACTER DEVICE SUPPORT
============================================
diff --git a/Documentation/pcieaer-howto.txt b/Documentation/pcieaer-howto.txt
new file mode 100644
index 0000000..16c2512
--- /dev/null
+++ b/Documentation/pcieaer-howto.txt
@@ -0,0 +1,253 @@
+ The PCI Express Advanced Error Reporting Driver Guide HOWTO
+ T. Long Nguyen <tom.l.nguyen@intel.com>
+ Yanmin Zhang <yanmin.zhang@intel.com>
+ 07/29/2006
+
+
+1. Overview
+
+1.1 About this guide
+
+This guide describes the basics of the PCI Express Advanced Error
+Reporting (AER) driver and provides information on how to use it, as
+well as how to enable the drivers of endpoint devices to conform with
+PCI Express AER driver.
+
+1.2 Copyright © Intel Corporation 2006.
+
+1.3 What is the PCI Express AER Driver?
+
+PCI Express error signaling can occur on the PCI Express link itself
+or on behalf of transactions initiated on the link. PCI Express
+defines two error reporting paradigms: the baseline capability and
+the Advanced Error Reporting capability. The baseline capability is
+required of all PCI Express components providing a minimum defined
+set of error reporting requirements. Advanced Error Reporting
+capability is implemented with a PCI Express advanced error reporting
+extended capability structure providing more robust error reporting.
+
+The PCI Express AER driver provides the infrastructure to support PCI
+Express Advanced Error Reporting capability. The PCI Express AER
+driver provides three basic functions:
+
+- Gathers the comprehensive error information if errors occurred.
+- Reports error to the users.
+- Performs error recovery actions.
+
+AER driver only attaches root ports which support PCI-Express AER
+capability.
+
+
+2. User Guide
+
+2.1 Include the PCI Express AER Root Driver into the Linux Kernel
+
+The PCI Express AER Root driver is a Root Port service driver attached
+to the PCI Express Port Bus driver. If a user wants to use it, the driver
+has to be compiled. Option CONFIG_PCIEAER supports this capability. It
+depends on CONFIG_PCIEPORTBUS, so pls. set CONFIG_PCIEPORTBUS=y and
+CONFIG_PCIEAER = y.
+
+2.2 Load PCI Express AER Root Driver
+There is a case where a system has AER support in BIOS. Enabling the AER
+Root driver and having AER support in BIOS may result unpredictable
+behavior. To avoid this conflict, a successful load of the AER Root driver
+requires ACPI _OSC support in the BIOS to allow the AER Root driver to
+request for native control of AER. See the PCI FW 3.0 Specification for
+details regarding OSC usage. Currently, lots of firmwares don't provide
+_OSC support while they use PCI Express. To support such firmwares,
+forceload, a parameter of type bool, could enable AER to continue to
+be initiated although firmwares have no _OSC support. To enable the
+walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
+when booting kernel. Note that forceload=n by default.
+
+2.3 AER error output
+When a PCI-E AER error is captured, an error message will be outputed to
+console. If it's a correctable error, it is outputed as a warning.
+Otherwise, it is printed as an error. So users could choose different
+log level to filter out correctable error messages.
+
+Below shows an example.
++------ PCI-Express Device Error -----+
+Error Severity : Uncorrected (Fatal)
+PCIE Bus Error type : Transaction Layer
+Unsupported Request : First
+Requester ID : 0500
+VendorID=8086h, DeviceID=0329h, Bus=05h, Device=00h, Function=00h
+TLB Header:
+04000001 00200a03 05010000 00050100
+
+In the example, 'Requester ID' means the ID of the device who sends
+the error message to root port. Pls. refer to pci express specs for
+other fields.
+
+
+3. Developer Guide
+
+To enable AER aware support requires a software driver to configure
+the AER capability structure within its device and to provide callbacks.
+
+To support AER better, developers need understand how AER does work
+firstly.
+
+PCI Express errors are classified into two types: correctable errors
+and uncorrectable errors. This classification is based on the impacts
+of those errors, which may result in degraded performance or function
+failure.
+
+Correctable errors pose no impacts on the functionality of the
+interface. The PCI Express protocol can recover without any software
+intervention or any loss of data. These errors are detected and
+corrected by hardware. Unlike correctable errors, uncorrectable
+errors impact functionality of the interface. Uncorrectable errors
+can cause a particular transaction or a particular PCI Express link
+to be unreliable. Depending on those error conditions, uncorrectable
+errors are further classified into non-fatal errors and fatal errors.
+Non-fatal errors cause the particular transaction to be unreliable,
+but the PCI Express link itself is fully functional. Fatal errors, on
+the other hand, cause the link to be unreliable.
+
+When AER is enabled, a PCI Express device will automatically send an
+error message to the PCIE root port above it when the device captures
+an error. The Root Port, upon receiving an error reporting message,
+internally processes and logs the error message in its PCI Express
+capability structure. Error information being logged includes storing
+the error reporting agent's requestor ID into the Error Source
+Identification Registers and setting the error bits of the Root Error
+Status Register accordingly. If AER error reporting is enabled in Root
+Error Command Register, the Root Port generates an interrupt if an
+error is detected.
+
+Note that the errors as described above are related to the PCI Express
+hierarchy and links. These errors do not include any device specific
+errors because device specific errors will still get sent directly to
+the device driver.
+
+3.1 Configure the AER capability structure
+
+AER aware drivers of PCI Express component need change the device
+control registers to enable AER. They also could change AER registers,
+including mask and severity registers. Helper function
+pci_enable_pcie_error_reporting could be used to enable AER. See
+section 3.3.
+
+3.2. Provide callbacks
+
+3.2.1 callback reset_link to reset pci express link
+
+This callback is used to reset the pci express physical link when a
+fatal error happens. The root port aer service driver provides a
+default reset_link function, but different upstream ports might
+have different specifications to reset pci express link, so all
+upstream ports should provide their own reset_link functions.
+
+In struct pcie_port_service_driver, a new pointer, reset_link, is
+added.
+
+pci_ers_result_t (*reset_link) (struct pci_dev *dev);
+
+Section 3.2.2.2 provides more detailed info on when to call
+reset_link.
+
+3.2.2 PCI error-recovery callbacks
+
+The PCI Express AER Root driver uses error callbacks to coordinate
+with downstream device drivers associated with a hierarchy in question
+when performing error recovery actions.
+
+Data struct pci_driver has a pointer, err_handler, to point to
+pci_error_handlers who consists of a couple of callback function
+pointers. AER driver follows the rules defined in
+pci-error-recovery.txt except pci express specific parts (e.g.
+reset_link). Pls. refer to pci-error-recovery.txt for detailed
+definitions of the callbacks.
+
+Below sections specify when to call the error callback functions.
+
+3.2.2.1 Correctable errors
+
+Correctable errors pose no impacts on the functionality of
+the interface. The PCI Express protocol can recover without any
+software intervention or any loss of data. These errors do not
+require any recovery actions. The AER driver clears the device's
+correctable error status register accordingly and logs these errors.
+
+3.2.2.2 Non-correctable (non-fatal and fatal) errors
+
+If an error message indicates a non-fatal error, performing link reset
+at upstream is not required. The AER driver calls error_detected(dev,
+pci_channel_io_normal) to all drivers associated within a hierarchy in
+question. for example,
+EndPoint<==>DownstreamPort B<==>UpstreamPort A<==>RootPort.
+If Upstream port A captures an AER error, the hierarchy consists of
+Downstream port B and EndPoint.
+
+A driver may return PCI_ERS_RESULT_CAN_RECOVER,
+PCI_ERS_RESULT_DISCONNECT, or PCI_ERS_RESULT_NEED_RESET, depending on
+whether it can recover or the AER driver calls mmio_enabled as next.
+
+If an error message indicates a fatal error, kernel will broadcast
+error_detected(dev, pci_channel_io_frozen) to all drivers within
+a hierarchy in question. Then, performing link reset at upstream is
+necessary. As different kinds of devices might use different approaches
+to reset link, AER port service driver is required to provide the
+function to reset link. Firstly, kernel looks for if the upstream
+component has an aer driver. If it has, kernel uses the reset_link
+callback of the aer driver. If the upstream component has no aer driver
+and the port is downstream port, we will use the aer driver of the
+root port who reports the AER error. As for upstream ports,
+they should provide their own aer service drivers with reset_link
+function. If error_detected returns PCI_ERS_RESULT_CAN_RECOVER and
+reset_link returns PCI_ERS_RESULT_RECOVERED, the error handling goes
+to mmio_enabled.
+
+3.3 helper functions
+
+3.3.1 int pci_find_aer_capability(struct pci_dev *dev);
+pci_find_aer_capability locates the PCI Express AER capability
+in the device configuration space. If the device doesn't support
+PCI-Express AER, the function returns 0.
+
+3.3.2 int pci_enable_pcie_error_reporting(struct pci_dev *dev);
+pci_enable_pcie_error_reporting enables the device to send error
+messages to root port when an error is detected. Note that devices
+don't enable the error reporting by default, so device drivers need
+call this function to enable it.
+
+3.3.3 int pci_disable_pcie_error_reporting(struct pci_dev *dev);
+pci_disable_pcie_error_reporting disables the device to send error
+messages to root port when an error is detected.
+
+3.3.4 int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
+pci_cleanup_aer_uncorrect_error_status cleanups the uncorrectable
+error status register.
+
+3.4 Frequent Asked Questions
+
+Q: What happens if a PCI Express device driver does not provide an
+error recovery handler (pci_driver->err_handler is equal to NULL)?
+
+A: The devices attached with the driver won't be recovered. If the
+error is fatal, kernel will print out warning messages. Please refer
+to section 3 for more information.
+
+Q: What happens if an upstream port service driver does not provide
+callback reset_link?
+
+A: Fatal error recovery will fail if the errors are reported by the
+upstream ports who are attached by the service driver.
+
+Q: How does this infrastructure deal with driver that is not PCI
+Express aware?
+
+A: This infrastructure calls the error callback functions of the
+driver when an error happens. But if the driver is not aware of
+PCI Express, the device might not report its own errors to root
+port.
+
+Q: What modifications will that driver need to make it compatible
+with the PCI Express AER Root driver?
+
+A: It could call the helper functions to enable AER in devices and
+cleanup uncorrectable status register. Pls. refer to section 3.3.
+
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index fba1e05..d0e79d5 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -1,208 +1,553 @@
+Most of the code in Linux is device drivers, so most of the Linux power
+management code is also driver-specific. Most drivers will do very little;
+others, especially for platforms with small batteries (like cell phones),
+will do a lot.
-Device Power Management
+This writeup gives an overview of how drivers interact with system-wide
+power management goals, emphasizing the models and interfaces that are
+shared by everything that hooks up to the driver model core. Read it as
+background for the domain-specific work you'd do with any specific driver.
-Device power management encompasses two areas - the ability to save
-state and transition a device to a low-power state when the system is
-entering a low-power state; and the ability to transition a device to
-a low-power state while the system is running (and independently of
-any other power management activity).
+Two Models for Device Power Management
+======================================
+Drivers will use one or both of these models to put devices into low-power
+states:
+
+ System Sleep model:
+ Drivers can enter low power states as part of entering system-wide
+ low-power states like "suspend-to-ram", or (mostly for systems with
+ disks) "hibernate" (suspend-to-disk).
+
+ This is something that device, bus, and class drivers collaborate on
+ by implementing various role-specific suspend and resume methods to
+ cleanly power down hardware and software subsystems, then reactivate
+ them without loss of data.
+
+ Some drivers can manage hardware wakeup events, which make the system
+ leave that low-power state. This feature may be disabled using the
+ relevant /sys/devices/.../power/wakeup file; enabling it may cost some
+ power usage, but let the whole system enter low power states more often.
+
+ Runtime Power Management model:
+ Drivers may also enter low power states while the system is running,
+ independently of other power management activity. Upstream drivers
+ will normally not know (or care) if the device is in some low power
+ state when issuing requests; the driver will auto-resume anything
+ that's needed when it gets a request.
+
+ This doesn't have, or need much infrastructure; it's just something you
+ should do when writing your drivers. For example, clk_disable() unused
+ clocks as part of minimizing power drain for currently-unused hardware.
+ Of course, sometimes clusters of drivers will collaborate with each
+ other, which could involve task-specific power management.
+
+There's not a lot to be said about those low power states except that they
+are very system-specific, and often device-specific. Also, that if enough
+drivers put themselves into low power states (at "runtime"), the effect may be
+the same as entering some system-wide low-power state (system sleep) ... and
+that synergies exist, so that several drivers using runtime pm might put the
+system into a state where even deeper power saving options are available.
+
+Most suspended devices will have quiesced all I/O: no more DMA or irqs, no
+more data read or written, and requests from upstream drivers are no longer
+accepted. A given bus or platform may have different requirements though.
+
+Examples of hardware wakeup events include an alarm from a real time clock,
+network wake-on-LAN packets, keyboard or mouse activity, and media insertion
+or removal (for PCMCIA, MMC/SD, USB, and so on).
-Methods
+Interfaces for Entering System Sleep States
+===========================================
+Most of the programming interfaces a device driver needs to know about
+relate to that first model: entering a system-wide low power state,
+rather than just minimizing power consumption by one device.
-The methods to suspend and resume devices reside in struct bus_type:
+
+Bus Driver Methods
+------------------
+The core methods to suspend and resume devices reside in struct bus_type.
+These are mostly of interest to people writing infrastructure for busses
+like PCI or USB, or because they define the primitives that device drivers
+may need to apply in domain-specific ways to their devices:
struct bus_type {
- ...
- int (*suspend)(struct device * dev, pm_message_t state);
- int (*resume)(struct device * dev);
+ ...
+ int (*suspend)(struct device *dev, pm_message_t state);
+ int (*suspend_late)(struct device *dev, pm_message_t state);
+
+ int (*resume_early)(struct device *dev);
+ int (*resume)(struct device *dev);
};
-Each bus driver is responsible implementing these methods, translating
-the call into a bus-specific request and forwarding the call to the
-bus-specific drivers. For example, PCI drivers implement suspend() and
-resume() methods in struct pci_driver. The PCI core is simply
-responsible for translating the pointers to PCI-specific ones and
-calling the low-level driver.
+Bus drivers implement those methods as appropriate for the hardware and
+the drivers using it; PCI works differently from USB, and so on. Not many
+people write bus drivers; most driver code is a "device driver" that
+builds on top of bus-specific framework code.
-This is done to a) ease transition to the new power management methods
-and leverage the existing PM code in various bus drivers; b) allow
-buses to implement generic and default PM routines for devices, and c)
-make the flow of execution obvious to the reader.
+For more information on these driver calls, see the description later;
+they are called in phases for every device, respecting the parent-child
+sequencing in the driver model tree. Note that as this is being written,
+only the suspend() and resume() are widely available; not many bus drivers
+leverage all of those phases, or pass them down to lower driver levels.
-System Power Management
+/sys/devices/.../power/wakeup files
+-----------------------------------
+All devices in the driver model have two flags to control handling of
+wakeup events, which are hardware signals that can force the device and/or
+system out of a low power state. These are initialized by bus or device
+driver code using device_init_wakeup(dev,can_wakeup).
-When the system enters a low-power state, the device tree is walked in
-a depth-first fashion to transition each device into a low-power
-state. The ordering of the device tree is guaranteed by the order in
-which devices get registered - children are never registered before
-their ancestors, and devices are placed at the back of the list when
-registered. By walking the list in reverse order, we are guaranteed to
-suspend devices in the proper order.
+The "can_wakeup" flag just records whether the device (and its driver) can
+physically support wakeup events. When that flag is clear, the sysfs
+"wakeup" file is empty, and device_may_wakeup() returns false.
-Devices are suspended once with interrupts enabled. Drivers are
-expected to stop I/O transactions, save device state, and place the
-device into a low-power state. Drivers may sleep, allocate memory,
-etc. at will.
+For devices that can issue wakeup events, a separate flag controls whether
+that device should try to use its wakeup mechanism. The initial value of
+device_may_wakeup() will be true, so that the device's "wakeup" file holds
+the value "enabled". Userspace can change that to "disabled" so that
+device_may_wakeup() returns false; or change it back to "enabled" (so that
+it returns true again).
-Some devices are broken and will inevitably have problems powering
-down or disabling themselves with interrupts enabled. For these
-special cases, they may return -EAGAIN. This will put the device on a
-list to be taken care of later. When interrupts are disabled, before
-we enter the low-power state, their drivers are called again to put
-their device to sleep.
-On resume, the devices that returned -EAGAIN will be called to power
-themselves back on with interrupts disabled. Once interrupts have been
-re-enabled, the rest of the drivers will be called to resume their
-devices. On resume, a driver is responsible for powering back on each
-device, restoring state, and re-enabling I/O transactions for that
-device.
+EXAMPLE: PCI Device Driver Methods
+-----------------------------------
+PCI framework software calls these methods when the PCI device driver bound
+to a device device has provided them:
+struct pci_driver {
+ ...
+ int (*suspend)(struct pci_device *pdev, pm_message_t state);
+ int (*suspend_late)(struct pci_device *pdev, pm_message_t state);
+
+ int (*resume_early)(struct pci_device *pdev);
+ int (*resume)(struct pci_device *pdev);
+};
+
+Drivers will implement those methods, and call PCI-specific procedures
+like pci_set_power_state(), pci_enable_wake(), pci_save_state(), and
+pci_restore_state() to manage PCI-specific mechanisms. (PCI config space
+could be saved during driver probe, if it weren't for the fact that some
+systems rely on userspace tweaking using setpci.) Devices are suspended
+before their bridges enter low power states, and likewise bridges resume
+before their devices.
+
+
+Upper Layers of Driver Stacks
+-----------------------------
+Device drivers generally have at least two interfaces, and the methods
+sketched above are the ones which apply to the lower level (nearer PCI, USB,
+or other bus hardware). The network and block layers are examples of upper
+level interfaces, as is a character device talking to userspace.
+
+Power management requests normally need to flow through those upper levels,
+which often use domain-oriented requests like "blank that screen". In
+some cases those upper levels will have power management intelligence that
+relates to end-user activity, or other devices that work in cooperation.
+
+When those interfaces are structured using class interfaces, there is a
+standard way to have the upper layer stop issuing requests to a given
+class device (and restart later):
+
+struct class {
+ ...
+ int (*suspend)(struct device *dev, pm_message_t state);
+ int (*resume)(struct device *dev);
+};
+
+Those calls are issued in specific phases of the process by which the
+system enters a low power "suspend" state, or resumes from it.
+
+
+Calling Drivers to Enter System Sleep States
+============================================
+When the system enters a low power state, each device's driver is asked
+to suspend the device by putting it into state compatible with the target
+system state. That's usually some version of "off", but the details are
+system-specific. Also, wakeup-enabled devices will usually stay partly
+functional in order to wake the system.
+
+When the system leaves that low power state, the device's driver is asked
+to resume it. The suspend and resume operations always go together, and
+both are multi-phase operations.
+
+For simple drivers, suspend might quiesce the device using the class code
+and then turn its hardware as "off" as possible with late_suspend. The
+matching resume calls would then completely reinitialize the hardware
+before reactivating its class I/O queues.
+
+More power-aware drivers drivers will use more than one device low power
+state, either at runtime or during system sleep states, and might trigger
+system wakeup events.
+
+
+Call Sequence Guarantees
+------------------------
+To ensure that bridges and similar links needed to talk to a device are
+available when the device is suspended or resumed, the device tree is
+walked in a bottom-up order to suspend devices. A top-down order is
+used to resume those devices.
+
+The ordering of the device tree is defined by the order in which devices
+get registered: a child can never be registered, probed or resumed before
+its parent; and can't be removed or suspended after that parent.
+
+The policy is that the device tree should match hardware bus topology.
+(Or at least the control bus, for devices which use multiple busses.)
+
+
+Suspending Devices
+------------------
+Suspending a given device is done in several phases. Suspending the
+system always includes every phase, executing calls for every device
+before the next phase begins. Not all busses or classes support all
+these callbacks; and not all drivers use all the callbacks.
+
+The phases are seen by driver notifications issued in this order:
+
+ 1 class.suspend(dev, message) is called after tasks are frozen, for
+ devices associated with a class that has such a method. This
+ method may sleep.
+
+ Since I/O activity usually comes from such higher layers, this is
+ a good place to quiesce all drivers of a given type (and keep such
+ code out of those drivers).
+
+ 2 bus.suspend(dev, message) is called next. This method may sleep,
+ and is often morphed into a device driver call with bus-specific
+ parameters and/or rules.
+
+ This call should handle parts of device suspend logic that require
+ sleeping. It probably does work to quiesce the device which hasn't
+ been abstracted into class.suspend() or bus.suspend_late().
+
+ 3 bus.suspend_late(dev, message) is called with IRQs disabled, and
+ with only one CPU active. Until the bus.resume_early() phase
+ completes (see later), IRQs are not enabled again. This method
+ won't be exposed by all busses; for message based busses like USB,
+ I2C, or SPI, device interactions normally require IRQs. This bus
+ call may be morphed into a driver call with bus-specific parameters.
+
+ This call might save low level hardware state that might otherwise
+ be lost in the upcoming low power state, and actually put the
+ device into a low power state ... so that in some cases the device
+ may stay partly usable until this late. This "late" call may also
+ help when coping with hardware that behaves badly.
+
+The pm_message_t parameter is currently used to refine those semantics
+(described later).
+
+At the end of those phases, drivers should normally have stopped all I/O
+transactions (DMA, IRQs), saved enough state that they can re-initialize
+or restore previous state (as needed by the hardware), and placed the
+device into a low-power state. On many platforms they will also use
+clk_disable() to gate off one or more clock sources; sometimes they will
+also switch off power supplies, or reduce voltages. Drivers which have
+runtime PM support may already have performed some or all of the steps
+needed to prepare for the upcoming system sleep state.
+
+When any driver sees that its device_can_wakeup(dev), it should make sure
+to use the relevant hardware signals to trigger a system wakeup event.
+For example, enable_irq_wake() might identify GPIO signals hooked up to
+a switch or other external hardware, and pci_enable_wake() does something
+similar for PCI's PME# signal.
+
+If a driver (or bus, or class) fails it suspend method, the system won't
+enter the desired low power state; it will resume all the devices it's
+suspended so far.
+
+Note that drivers may need to perform different actions based on the target
+system lowpower/sleep state. At this writing, there are only platform
+specific APIs through which drivers could determine those target states.
+
+
+Device Low Power (suspend) States
+---------------------------------
+Device low-power states aren't very standard. One device might only handle
+"on" and "off, while another might support a dozen different versions of
+"on" (how many engines are active?), plus a state that gets back to "on"
+faster than from a full "off".
+
+Some busses define rules about what different suspend states mean. PCI
+gives one example: after the suspend sequence completes, a non-legacy
+PCI device may not perform DMA or issue IRQs, and any wakeup events it
+issues would be issued through the PME# bus signal. Plus, there are
+several PCI-standard device states, some of which are optional.
+
+In contrast, integrated system-on-chip processors often use irqs as the
+wakeup event sources (so drivers would call enable_irq_wake) and might
+be able to treat DMA completion as a wakeup event (sometimes DMA can stay
+active too, it'd only be the CPU and some peripherals that sleep).
+
+Some details here may be platform-specific. Systems may have devices that
+can be fully active in certain sleep states, such as an LCD display that's
+refreshed using DMA while most of the system is sleeping lightly ... and
+its frame buffer might even be updated by a DSP or other non-Linux CPU while
+the Linux control processor stays idle.
+
+Moreover, the specific actions taken may depend on the target system state.
+One target system state might allow a given device to be very operational;
+another might require a hard shut down with re-initialization on resume.
+And two different target systems might use the same device in different
+ways; the aforementioned LCD might be active in one product's "standby",
+but a different product using the same SOC might work differently.
+
+
+Meaning of pm_message_t.event
+-----------------------------
+Parameters to suspend calls include the device affected and a message of
+type pm_message_t, which has one field: the event. If driver does not
+recognize the event code, suspend calls may abort the request and return
+a negative errno. However, most drivers will be fine if they implement
+PM_EVENT_SUSPEND semantics for all messages.
+
+The event codes are used to refine the goal of suspending the device, and
+mostly matter when creating or resuming system memory image snapshots, as
+used with suspend-to-disk:
+
+ PM_EVENT_SUSPEND -- quiesce the driver and put hardware into a low-power
+ state. When used with system sleep states like "suspend-to-RAM" or
+ "standby", the upcoming resume() call will often be able to rely on
+ state kept in hardware, or issue system wakeup events. When used
+ instead with suspend-to-disk, few devices support this capability;
+ most are completely powered off.
+
+ PM_EVENT_FREEZE -- quiesce the driver, but don't necessarily change into
+ any low power mode. A system snapshot is about to be taken, often
+ followed by a call to the driver's resume() method. Neither wakeup
+ events nor DMA are allowed.
+
+ PM_EVENT_PRETHAW -- quiesce the driver, knowing that the upcoming resume()
+ will restore a suspend-to-disk snapshot from a different kernel image.
+ Drivers that are smart enough to look at their hardware state during
+ resume() processing need that state to be correct ... a PRETHAW could
+ be used to invalidate that state (by resetting the device), like a
+ shutdown() invocation would before a kexec() or system halt. Other
+ drivers might handle this the same way as PM_EVENT_FREEZE. Neither
+ wakeup events nor DMA are allowed.
+
+To enter "standby" (ACPI S1) or "Suspend to RAM" (STR, ACPI S3) states, or
+the similarly named APM states, only PM_EVENT_SUSPEND is used; for "Suspend
+to Disk" (STD, hibernate, ACPI S4), all of those event codes are used.
+
+There's also PM_EVENT_ON, a value which never appears as a suspend event
+but is sometimes used to record the "not suspended" device state.
+
+
+Resuming Devices
+----------------
+Resuming is done in multiple phases, much like suspending, with all
+devices processing each phase's calls before the next phase begins.
+
+The phases are seen by driver notifications issued in this order:
+
+ 1 bus.resume_early(dev) is called with IRQs disabled, and with
+ only one CPU active. As with bus.suspend_late(), this method
+ won't be supported on busses that require IRQs in order to
+ interact with devices.
+
+ This reverses the effects of bus.suspend_late().
+
+ 2 bus.resume(dev) is called next. This may be morphed into a device
+ driver call with bus-specific parameters; implementations may sleep.
+
+ This reverses the effects of bus.suspend().
+
+ 3 class.resume(dev) is called for devices associated with a class
+ that has such a method. Implementations may sleep.
+
+ This reverses the effects of class.suspend(), and would usually
+ reactivate the device's I/O queue.
+
+At the end of those phases, drivers should normally be as functional as
+they were before suspending: I/O can be performed using DMA and IRQs, and
+the relevant clocks are gated on. The device need not be "fully on"; it
+might be in a runtime lowpower/suspend state that acts as if it were.
+
+However, the details here may again be platform-specific. For example,
+some systems support multiple "run" states, and the mode in effect at
+the end of resume() might not be the one which preceded suspension.
+That means availability of certain clocks or power supplies changed,
+which could easily affect how a driver works.
+
+
+Drivers need to be able to handle hardware which has been reset since the
+suspend methods were called, for example by complete reinitialization.
+This may be the hardest part, and the one most protected by NDA'd documents
+and chip errata. It's simplest if the hardware state hasn't changed since
+the suspend() was called, but that can't always be guaranteed.
+
+Drivers must also be prepared to notice that the device has been removed
+while the system was powered off, whenever that's physically possible.
+PCMCIA, MMC, USB, Firewire, SCSI, and even IDE are common examples of busses
+where common Linux platforms will see such removal. Details of how drivers
+will notice and handle such removals are currently bus-specific, and often
+involve a separate thread.
+
+
+Note that the bus-specific runtime PM wakeup mechanism can exist, and might
+be defined to share some of the same driver code as for system wakeup. For
+example, a bus-specific device driver's resume() method might be used there,
+so it wouldn't only be called from bus.resume() during system-wide wakeup.
+See bus-specific information about how runtime wakeup events are handled.
+
+
+System Devices
+--------------
System devices follow a slightly different API, which can be found in
include/linux/sysdev.h
drivers/base/sys.c
-System devices will only be suspended with interrupts disabled, and
-after all other devices have been suspended. On resume, they will be
-resumed before any other devices, and also with interrupts disabled.
+System devices will only be suspended with interrupts disabled, and after
+all other devices have been suspended. On resume, they will be resumed
+before any other devices, and also with interrupts disabled.
+
+That is, IRQs are disabled, the suspend_late() phase begins, then the
+sysdev_driver.suspend() phase, and the system enters a sleep state. Then
+the sysdev_driver.resume() phase begins, followed by the resume_early()
+phase, after which IRQs are enabled.
+
+Code to actually enter and exit the system-wide low power state sometimes
+involves hardware details that are only known to the boot firmware, and
+may leave a CPU running software (from SRAM or flash memory) that monitors
+the system and manages its wakeup sequence.
Runtime Power Management
+========================
+Many devices are able to dynamically power down while the system is still
+running. This feature is useful for devices that are not being used, and
+can offer significant power savings on a running system. These devices
+often support a range of runtime power states, which might use names such
+as "off", "sleep", "idle", "active", and so on. Those states will in some
+cases (like PCI) be partially constrained by a bus the device uses, and will
+usually include hardware states that are also used in system sleep states.
-Many devices are able to dynamically power down while the system is
-still running. This feature is useful for devices that are not being
-used, and can offer significant power savings on a running system.
+However, note that if a driver puts a device into a runtime low power state
+and the system then goes into a system-wide sleep state, it normally ought
+to resume into that runtime low power state rather than "full on". Such
+distinctions would be part of the driver-internal state machine for that
+hardware; the whole point of runtime power management is to be sure that
+drivers are decoupled in that way from the state machine governing phases
+of the system-wide power/sleep state transitions.
-In each device's directory, there is a 'power' directory, which
-contains at least a 'state' file. Reading from this file displays what
-power state the device is currently in. Writing to this file initiates
-a transition to the specified power state, which must be a decimal in
-the range 1-3, inclusive; or 0 for 'On'.
-The PM core will call the ->suspend() method in the bus_type object
-that the device belongs to if the specified state is not 0, or
-->resume() if it is.
+Power Saving Techniques
+-----------------------
+Normally runtime power management is handled by the drivers without specific
+userspace or kernel intervention, by device-aware use of techniques like:
-Nothing will happen if the specified state is the same state the
-device is currently in.
+ Using information provided by other system layers
+ - stay deeply "off" except between open() and close()
+ - if transceiver/PHY indicates "nobody connected", stay "off"
+ - application protocols may include power commands or hints
-If the device is already in a low-power state, and the specified state
-is another, but different, low-power state, the ->resume() method will
-first be called to power the device back on, then ->suspend() will be
-called again with the new state.
+ Using fewer CPU cycles
+ - using DMA instead of PIO
+ - removing timers, or making them lower frequency
+ - shortening "hot" code paths
+ - eliminating cache misses
+ - (sometimes) offloading work to device firmware
-The driver is responsible for saving the working state of the device
-and putting it into the low-power state specified. If this was
-successful, it returns 0, and the device's power_state field is
-updated.
+ Reducing other resource costs
+ - gating off unused clocks in software (or hardware)
+ - switching off unused power supplies
+ - eliminating (or delaying/merging) IRQs
+ - tuning DMA to use word and/or burst modes
-The driver must take care to know whether or not it is able to
-properly resume the device, including all step of reinitialization
-necessary. (This is the hardest part, and the one most protected by
-NDA'd documents).
+ Using device-specific low power states
+ - using lower voltages
+ - avoiding needless DMA transfers
-The driver must also take care not to suspend a device that is
-currently in use. It is their responsibility to provide their own
-exclusion mechanisms.
+Read your hardware documentation carefully to see the opportunities that
+may be available. If you can, measure the actual power usage and check
+it against the budget established for your project.
-The runtime power transition happens with interrupts enabled. If a
-device cannot support being powered down with interrupts, it may
-return -EAGAIN (as it would during a system power management
-transition), but it will _not_ be called again, and the transaction
-will fail.
-There is currently no way to know what states a device or driver
-supports a priori. This will change in the future.
+Examples: USB hosts, system timer, system CPU
+----------------------------------------------
+USB host controllers make interesting, if complex, examples. In many cases
+these have no work to do: no USB devices are connected, or all of them are
+in the USB "suspend" state. Linux host controller drivers can then disable
+periodic DMA transfers that would otherwise be a constant power drain on the
+memory subsystem, and enter a suspend state. In power-aware controllers,
+entering that suspend state may disable the clock used with USB signaling,
+saving a certain amount of power.
-pm_message_t meaning
+The controller will be woken from that state (with an IRQ) by changes to the
+signal state on the data lines of a given port, for example by an existing
+peripheral requesting "remote wakeup" or by plugging a new peripheral. The
+same wakeup mechanism usually works from "standby" sleep states, and on some
+systems also from "suspend to RAM" (or even "suspend to disk") states.
+(Except that ACPI may be involved instead of normal IRQs, on some hardware.)
-pm_message_t has two fields. event ("major"), and flags. If driver
-does not know event code, it aborts the request, returning error. Some
-drivers may need to deal with special cases based on the actual type
-of suspend operation being done at the system level. This is why
-there are flags.
+System devices like timers and CPUs may have special roles in the platform
+power management scheme. For example, system timers using a "dynamic tick"
+approach don't just save CPU cycles (by eliminating needless timer IRQs),
+but they may also open the door to using lower power CPU "idle" states that
+cost more than a jiffie to enter and exit. On x86 systems these are states
+like "C3"; note that periodic DMA transfers from a USB host controller will
+also prevent entry to a C3 state, much like a periodic timer IRQ.
-Event codes are:
+That kind of runtime mechanism interaction is common. "System On Chip" (SOC)
+processors often have low power idle modes that can't be entered unless
+certain medium-speed clocks (often 12 or 48 MHz) are gated off. When the
+drivers gate those clocks effectively, then the system idle task may be able
+to use the lower power idle modes and thereby increase battery life.
-ON -- no need to do anything except special cases like broken
-HW.
+If the CPU can have a "cpufreq" driver, there also may be opportunities
+to shift to lower voltage settings and reduce the power cost of executing
+a given number of instructions. (Without voltage adjustment, it's rare
+for cpufreq to save much power; the cost-per-instruction must go down.)
-# NOTIFICATION -- pretty much same as ON?
-FREEZE -- stop DMA and interrupts, and be prepared to reinit HW from
-scratch. That probably means stop accepting upstream requests, the
-actual policy of what to do with them being specific to a given
-driver. It's acceptable for a network driver to just drop packets
-while a block driver is expected to block the queue so no request is
-lost. (Use IDE as an example on how to do that). FREEZE requires no
-power state change, and it's expected for drivers to be able to
-quickly transition back to operating state.
+/sys/devices/.../power/state files
+==================================
+For now you can also test some of this functionality using sysfs.
-SUSPEND -- like FREEZE, but also put hardware into low-power state. If
-there's need to distinguish several levels of sleep, additional flag
-is probably best way to do that.
+ DEPRECATED: USE "power/state" ONLY FOR DRIVER TESTING, AND
+ AVOID USING dev->power.power_state IN DRIVERS.
-Transitions are only from a resumed state to a suspended state, never
-between 2 suspended states. (ON -> FREEZE or ON -> SUSPEND can happen,
-FREEZE -> SUSPEND or SUSPEND -> FREEZE can not).
+ THESE WILL BE REMOVED. IF THE "power/state" FILE GETS REPLACED,
+ IT WILL BECOME SOMETHING COUPLED TO THE BUS OR DRIVER.
-All events are:
+In each device's directory, there is a 'power' directory, which contains
+at least a 'state' file. The value of this field is effectively boolean,
+PM_EVENT_ON or PM_EVENT_SUSPEND.
-[NOTE NOTE NOTE: If you are driver author, you should not care; you
-should only look at event, and ignore flags.]
+ * Reading from this file displays a value corresponding to
+ the power.power_state.event field. All nonzero values are
+ displayed as "2", corresponding to a low power state; zero
+ is displayed as "0", corresponding to normal operation.
-#Prepare for suspend -- userland is still running but we are going to
-#enter suspend state. This gives drivers chance to load firmware from
-#disk and store it in memory, or do other activities taht require
-#operating userland, ability to kmalloc GFP_KERNEL, etc... All of these
-#are forbiden once the suspend dance is started.. event = ON, flags =
-#PREPARE_TO_SUSPEND
+ * Writing to this file initiates a transition using the
+ specified event code number; only '0', '2', and '3' are
+ accepted (without a newline); '2' and '3' are both
+ mapped to PM_EVENT_SUSPEND.
-Apm standby -- prepare for APM event. Quiesce devices to make life
-easier for APM BIOS. event = FREEZE, flags = APM_STANDBY
+On writes, the PM core relies on that recorded event code and the device/bus
+capabilities to determine whether it uses a partial suspend() or resume()
+sequence to change things so that the recorded event corresponds to the
+numeric parameter.
-Apm suspend -- same as APM_STANDBY, but it we should probably avoid
-spinning down disks. event = FREEZE, flags = APM_SUSPEND
+ - If the bus requires the irqs-disabled suspend_late()/resume_early()
+ phases, writes fail because those operations are not supported here.
-System halt, reboot -- quiesce devices to make life easier for BIOS. event
-= FREEZE, flags = SYSTEM_HALT or SYSTEM_REBOOT
+ - If the recorded value is the expected value, nothing is done.
-System shutdown -- at least disks need to be spun down, or data may be
-lost. Quiesce devices, just to make life easier for BIOS. event =
-FREEZE, flags = SYSTEM_SHUTDOWN
+ - If the recorded value is nonzero, the device is partially resumed,
+ using the bus.resume() and/or class.resume() methods.
-Kexec -- turn off DMAs and put hardware into some state where new
-kernel can take over. event = FREEZE, flags = KEXEC
+ - If the target value is nonzero, the device is partially suspended,
+ using the class.suspend() and/or bus.suspend() methods and the
+ PM_EVENT_SUSPEND message.
-Powerdown at end of swsusp -- very similar to SYSTEM_SHUTDOWN, except wake
-may need to be enabled on some devices. This actually has at least 3
-subtypes, system can reboot, enter S4 and enter S5 at the end of
-swsusp. event = FREEZE, flags = SWSUSP and one of SYSTEM_REBOOT,
-SYSTEM_SHUTDOWN, SYSTEM_S4
-
-Suspend to ram -- put devices into low power state. event = SUSPEND,
-flags = SUSPEND_TO_RAM
-
-Freeze for swsusp snapshot -- stop DMA and interrupts. No need to put
-devices into low power mode, but you must be able to reinitialize
-device from scratch in resume method. This has two flavors, its done
-once on suspending kernel, once on resuming kernel. event = FREEZE,
-flags = DURING_SUSPEND or DURING_RESUME
-
-Device detach requested from /sys -- deinitialize device; proably same as
-SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
-= FREEZE, flags = DEV_DETACH.
-
-#These are not really events sent:
-#
-#System fully on -- device is working normally; this is probably never
-#passed to suspend() method... event = ON, flags = 0
-#
-#Ready after resume -- userland is now running, again. Time to free any
-#memory you ate during prepare to suspend... event = ON, flags =
-#READY_AFTER_RESUME
-#
+Drivers have no way to tell whether their suspend() and resume() calls
+have come through the sysfs power/state file or as part of entering a
+system sleep state, except that when accessed through sysfs the normal
+parent/child sequencing rules are ignored. Drivers (such as bus, bridge,
+or hub drivers) which expose child devices may need to enforce those rules
+on their own.
diff --git a/Documentation/sh/new-machine.txt b/Documentation/sh/new-machine.txt
index eb2dd2e..73988e0 100644
--- a/Documentation/sh/new-machine.txt
+++ b/Documentation/sh/new-machine.txt
@@ -41,11 +41,6 @@
|
.. more boards here ...
-It should also be noted that each board is required to have some certain
-headers. At the time of this writing, io.h is the only thing that needs
-to be provided for each board, and can generally just reference generic
-functions (with the exception of isa_port2addr).
-
Next, for companion chips:
.
`-- arch
@@ -104,12 +99,13 @@
Both the Solution Engine and the hp6xx boards are an example of this.
After you have setup your new arch/sh/boards/ directory, remember that you
-also must add a directory in include/asm-sh for headers localized to this
-board. In order to interoperate seamlessly with the build system, it's best
-to have this directory the same as the arch/sh/boards/ directory name,
-though if your board is again part of a family, the build system has ways
-of dealing with this, and you can feel free to name the directory after
-the family member itself.
+should also add a directory in include/asm-sh for headers localized to this
+board (if there are going to be more than one). In order to interoperate
+seamlessly with the build system, it's best to have this directory the same
+as the arch/sh/boards/ directory name, though if your board is again part of
+a family, the build system has ways of dealing with this (via incdir-y
+overloading), and you can feel free to name the directory after the family
+member itself.
There are a few things that each board is required to have, both in the
arch/sh/boards and the include/asm-sh/ heirarchy. In order to better
@@ -122,6 +118,7 @@
* arch/sh/boards/vapor/setup.c - Setup code for imaginary board
*/
#include <linux/init.h>
+#include <asm/rtc.h> /* for board_time_init() */
const char *get_system_type(void)
{
@@ -152,79 +149,57 @@
}
Our new imaginary board will also have to tie into the machvec in order for it
-to be of any use. Currently the machvec is slowly on its way out, but is still
-required for the time being. As such, let us take a look at what needs to be
-done for the machvec assignment.
+to be of any use.
machvec functions fall into a number of categories:
- I/O functions to IO memory (inb etc) and PCI/main memory (readb etc).
- - I/O remapping functions (ioremap etc)
- - some initialisation functions
- - a 'heartbeat' function
- - some miscellaneous flags
+ - I/O mapping functions (ioport_map, ioport_unmap, etc).
+ - a 'heartbeat' function.
+ - PCI and IRQ initialization routines.
+ - Consistent allocators (for boards that need special allocators,
+ particularly for allocating out of some board-specific SRAM for DMA
+ handles).
-The tree can be built in two ways:
- - as a fully generic build. All drivers are linked in, and all functions
- go through the machvec
- - as a machine specific build. In this case only the required drivers
- will be linked in, and some macros may be redefined to not go through
- the machvec where performance is important (in particular IO functions).
+There are machvec functions added and removed over time, so always be sure to
+consult include/asm-sh/machvec.h for the current state of the machvec.
-There are three ways in which IO can be performed:
- - none at all. This is really only useful for the 'unknown' machine type,
- which us designed to run on a machine about which we know nothing, and
- so all all IO instructions do nothing.
- - fully custom. In this case all IO functions go to a machine specific
- set of functions which can do what they like
- - a generic set of functions. These will cope with most situations,
- and rely on a single function, mv_port2addr, which is called through the
- machine vector, and converts an IO address into a memory address, which
- can be read from/written to directly.
+The kernel will automatically wrap in generic routines for undefined function
+pointers in the machvec at boot time, as machvec functions are referenced
+unconditionally throughout most of the tree. Some boards have incredibly
+sparse machvecs (such as the dreamcast and sh03), whereas others must define
+virtually everything (rts7751r2d).
-Thus adding a new machine involves the following steps (I will assume I am
-adding a machine called vapor):
+Adding a new machine is relatively trivial (using vapor as an example):
- - add a new file include/asm-sh/vapor/io.h which contains prototypes for
+If the board-specific definitions are quite minimalistic, as is the case for
+the vast majority of boards, simply having a single board-specific header is
+sufficient.
+
+ - add a new file include/asm-sh/vapor.h which contains prototypes for
any machine specific IO functions prefixed with the machine name, for
example vapor_inb. These will be needed when filling out the machine
vector.
- This is the minimum that is required, however there are ample
- opportunities to optimise this. In particular, by making the prototypes
- inline function definitions, it is possible to inline the function when
- building machine specific versions. Note that the machine vector
- functions will still be needed, so that a module built for a generic
- setup can be loaded.
+ Note that these prototypes are generated automatically by setting
+ __IO_PREFIX to something sensible. A typical example would be:
- - add a new file arch/sh/boards/vapor/mach.c. This contains the definition
- of the machine vector. When building the machine specific version, this
- will be the real machine vector (via an alias), while in the generic
- version is used to initialise the machine vector, and then freed, by
- making it initdata. This should be defined as:
+ #define __IO_PREFIX vapor
+ #include <asm/io_generic.h>
- struct sh_machine_vector mv_vapor __initmv = {
- .mv_name = "vapor",
- }
- ALIAS_MV(vapor)
+ somewhere in the board-specific header. Any boards being ported that still
+ have a legacy io.h should remove it entirely and switch to the new model.
- - finally add a file arch/sh/boards/vapor/io.c, which contains
- definitions of the machine specific io functions.
+ - Add machine vector definitions to the board's setup.c. At a bare minimum,
+ this must be defined as something like:
-A note about initialisation functions. Three initialisation functions are
-provided in the machine vector:
- - mv_arch_init - called very early on from setup_arch
- - mv_init_irq - called from init_IRQ, after the generic SH interrupt
- initialisation
- - mv_init_pci - currently not used
+ struct sh_machine_vector mv_vapor __initmv = {
+ .mv_name = "vapor",
+ };
+ ALIAS_MV(vapor)
-Any other remaining functions which need to be called at start up can be
-added to the list using the __initcalls macro (or module_init if the code
-can be built as a module). Many generic drivers probe to see if the device
-they are targeting is present, however this may not always be appropriate,
-so a flag can be added to the machine vector which will be set on those
-machines which have the hardware in question, reducing the probe to a
-single conditional.
+ - finally add a file arch/sh/boards/vapor/io.c, which contains definitions of
+ the machine specific io functions (if there are enough to warrant it).
3. Hooking into the Build System
================================
@@ -303,4 +278,3 @@
oldconfig (prompting you for any new options since the time of creation),
and start you on your way to having a functional kernel for your new
board.
-
diff --git a/Documentation/sh/register-banks.txt b/Documentation/sh/register-banks.txt
new file mode 100644
index 0000000..a6719f2
--- /dev/null
+++ b/Documentation/sh/register-banks.txt
@@ -0,0 +1,33 @@
+ Notes on register bank usage in the kernel
+ ==========================================
+
+Introduction
+------------
+
+The SH-3 and SH-4 CPU families traditionally include a single partial register
+bank (selected by SR.RB, only r0 ... r7 are banked), whereas other families
+may have more full-featured banking or simply no such capabilities at all.
+
+SR.RB banking
+-------------
+
+In the case of this type of banking, banked registers are mapped directly to
+r0 ... r7 if SR.RB is set to the bank we are interested in, otherwise ldc/stc
+can still be used to reference the banked registers (as r0_bank ... r7_bank)
+when in the context of another bank. The developer must keep the SR.RB value
+in mind when writing code that utilizes these banked registers, for obvious
+reasons. Userspace is also not able to poke at the bank1 values, so these can
+be used rather effectively as scratch registers by the kernel.
+
+Presently the kernel uses several of these registers.
+
+ - r0_bank, r1_bank (referenced as k0 and k1, used for scratch
+ registers when doing exception handling).
+ - r2_bank (used to track the EXPEVT/INTEVT code)
+ - Used by do_IRQ() and friends for doing irq mapping based off
+ of the interrupt exception vector jump table offset
+ - r6_bank (global interrupt mask)
+ - The SR.IMASK interrupt handler makes use of this to set the
+ interrupt priority level (used by local_irq_enable())
+ - r7_bank (current)
+
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 867f4c3..39c68f8 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -98,13 +98,13 @@
error, a failure to respond (often caused by
device disconnect), or some other fault.
--ETIMEDOUT (**) No response packet received within the prescribed
+-ETIME (**) No response packet received within the prescribed
bus turn-around time. This error may instead be
reported as -EPROTO or -EILSEQ.
- Note that the synchronous USB message functions
- also use this code to indicate timeout expired
- before the transfer completed.
+-ETIMEDOUT Synchronous USB message functions use this code
+ to indicate timeout expired before the transfer
+ completed, and no other error was reported by HC.
-EPIPE (**) Endpoint stalled. For non-control endpoints,
reset this status with usb_clear_halt().
@@ -163,6 +163,3 @@
usb_control_msg():
usb_bulk_msg():
-ETIMEDOUT Timeout expired before the transfer completed.
- In the future this code may change to -ETIME,
- whose definition is a closer match to this sort
- of error.
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index 02b0f7b..a2dee6e 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -433,6 +433,11 @@
See http://www.uuhaus.de/linux/palmconnect.html for up-to-date
information on this driver.
+AIRcable USB Dongle Bluetooth driver
+ If there is the cdc_acm driver loaded in the system, you will find that the
+ cdc_acm claims the device before AIRcable can. This is simply corrected
+ by unloading both modules and then loading the aircable module before
+ cdc_acm module
Generic Serial driver
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 6da24e7..4303e0c 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -245,6 +245,13 @@
newfallback: use new unwinder but fall back to old if it gets
stuck (default)
+ call_trace=[old|both|newfallback|new]
+ old: use old inexact backtracer
+ new: use new exact dwarf2 unwinder
+ both: print entries from both
+ newfallback: use new unwinder but fall back to old if it gets
+ stuck (default)
+
Misc
noreplacement Don't replace instructions with more appropriate ones
diff --git a/Documentation/x86_64/kernel-stacks b/Documentation/x86_64/kernel-stacks
new file mode 100644
index 0000000..bddfddd
--- /dev/null
+++ b/Documentation/x86_64/kernel-stacks
@@ -0,0 +1,99 @@
+Most of the text from Keith Owens, hacked by AK
+
+x86_64 page size (PAGE_SIZE) is 4K.
+
+Like all other architectures, x86_64 has a kernel stack for every
+active thread. These thread stacks are THREAD_SIZE (2*PAGE_SIZE) big.
+These stacks contain useful data as long as a thread is alive or a
+zombie. While the thread is in user space the kernel stack is empty
+except for the thread_info structure at the bottom.
+
+In addition to the per thread stacks, there are specialized stacks
+associated with each cpu. These stacks are only used while the kernel
+is in control on that cpu, when a cpu returns to user space the
+specialized stacks contain no useful data. The main cpu stacks is
+
+* Interrupt stack. IRQSTACKSIZE
+
+ Used for external hardware interrupts. If this is the first external
+ hardware interrupt (i.e. not a nested hardware interrupt) then the
+ kernel switches from the current task to the interrupt stack. Like
+ the split thread and interrupt stacks on i386 (with CONFIG_4KSTACKS),
+ this gives more room for kernel interrupt processing without having
+ to increase the size of every per thread stack.
+
+ The interrupt stack is also used when processing a softirq.
+
+Switching to the kernel interrupt stack is done by software based on a
+per CPU interrupt nest counter. This is needed because x86-64 "IST"
+hardware stacks cannot nest without races.
+
+x86_64 also has a feature which is not available on i386, the ability
+to automatically switch to a new stack for designated events such as
+double fault or NMI, which makes it easier to handle these unusual
+events on x86_64. This feature is called the Interrupt Stack Table
+(IST). There can be up to 7 IST entries per cpu. The IST code is an
+index into the Task State Segment (TSS), the IST entries in the TSS
+point to dedicated stacks, each stack can be a different size.
+
+An IST is selected by an non-zero value in the IST field of an
+interrupt-gate descriptor. When an interrupt occurs and the hardware
+loads such a descriptor, the hardware automatically sets the new stack
+pointer based on the IST value, then invokes the interrupt handler. If
+software wants to allow nested IST interrupts then the handler must
+adjust the IST values on entry to and exit from the interrupt handler.
+(this is occasionally done, e.g. for debug exceptions)
+
+Events with different IST codes (i.e. with different stacks) can be
+nested. For example, a debug interrupt can safely be interrupted by an
+NMI. arch/x86_64/kernel/entry.S::paranoidentry adjusts the stack
+pointers on entry to and exit from all IST events, in theory allowing
+IST events with the same code to be nested. However in most cases, the
+stack size allocated to an IST assumes no nesting for the same code.
+If that assumption is ever broken then the stacks will become corrupt.
+
+The currently assigned IST stacks are :-
+
+* STACKFAULT_STACK. EXCEPTION_STKSZ (PAGE_SIZE).
+
+ Used for interrupt 12 - Stack Fault Exception (#SS).
+
+ This allows to recover from invalid stack segments. Rarely
+ happens.
+
+* DOUBLEFAULT_STACK. EXCEPTION_STKSZ (PAGE_SIZE).
+
+ Used for interrupt 8 - Double Fault Exception (#DF).
+
+ Invoked when handling a exception causes another exception. Happens
+ when the kernel is very confused (e.g. kernel stack pointer corrupt)
+ Using a separate stack allows to recover from it well enough in many
+ cases to still output an oops.
+
+* NMI_STACK. EXCEPTION_STKSZ (PAGE_SIZE).
+
+ Used for non-maskable interrupts (NMI).
+
+ NMI can be delivered at any time, including when the kernel is in the
+ middle of switching stacks. Using IST for NMI events avoids making
+ assumptions about the previous state of the kernel stack.
+
+* DEBUG_STACK. DEBUG_STKSZ
+
+ Used for hardware debug interrupts (interrupt 1) and for software
+ debug interrupts (INT3).
+
+ When debugging a kernel, debug interrupts (both hardware and
+ software) can occur at any time. Using IST for these interrupts
+ avoids making assumptions about the previous state of the kernel
+ stack.
+
+* MCE_STACK. EXCEPTION_STKSZ (PAGE_SIZE).
+
+ Used for interrupt 18 - Machine Check Exception (#MC).
+
+ MCE can be delivered at any time, including when the kernel is in the
+ middle of switching stacks. Using IST for MCE events avoids making
+ assumptions about the previous state of the kernel stack.
+
+For more details see the Intel IA32 or AMD AMD64 architecture manuals.
diff --git a/Makefile b/Makefile
index 80dac02..4c6c5e3 100644
--- a/Makefile
+++ b/Makefile
@@ -1385,9 +1385,13 @@
endif #ifeq ($(mixed-targets),1)
PHONY += checkstack kernelrelease kernelversion
+
+# Use $(SUBARCH) here instead of $(ARCH) so that this works for UML.
+# In the UML case, $(SUBARCH) is the name of the underlying
+# architecture, while for all other arches, it is the same as $(ARCH).
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
- $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+ $(PERL) $(src)/scripts/checkstack.pl $(SUBARCH)
kernelrelease:
$(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index cce2657..337c01c 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -284,21 +284,9 @@
/*
* USB Device Controller
*/
-static void corgi_udc_command(int cmd)
-{
- switch(cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- GPSR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- GPCR(CORGI_GPIO_USB_PULLUP) = GPIO_bit(CORGI_GPIO_USB_PULLUP);
- break;
- }
-}
-
static struct pxa2xx_udc_mach_info udc_info __initdata = {
/* no connect GPIO; corgi can't tell connection status */
- .udc_command = corgi_udc_command,
+ .gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
@@ -350,7 +338,6 @@
corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
- pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 9b81532..7e80968 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -26,7 +26,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/usb_otg.h>
+#include <linux/usb/otg.h>
#include <asm/io.h>
#include <asm/irq.h>
diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c
index 5d0523b..7b07305 100644
--- a/arch/avr32/mm/tlb.c
+++ b/arch/avr32/mm/tlb.c
@@ -15,7 +15,8 @@
void show_dtlb_entry(unsigned int index)
{
- unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save, flags;
+ unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
+ unsigned long flags;
local_irq_save(flags);
mmucr_save = sysreg_read(MMUCR);
@@ -305,7 +306,8 @@
static int tlb_show(struct seq_file *tlb, void *v)
{
- unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save, flags;
+ unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
+ unsigned long flags;
unsigned long *index = v;
if (*index == 0)
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 6189b0c..3fd2f25 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -166,7 +166,6 @@
config X86_GENERICARCH
bool "Generic architecture (Summit, bigsmp, ES7000, default)"
- depends on SMP
help
This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
It is intended for a generic binary kernel.
@@ -263,7 +262,7 @@
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
- depends on !SMP && !(X86_VISWS || X86_VOYAGER)
+ depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
help
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
@@ -288,12 +287,12 @@
config X86_LOCAL_APIC
bool
- depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER)
+ depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH
default y
config X86_IO_APIC
bool
- depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER))
+ depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH
default y
config X86_VISWS_APIC
@@ -402,6 +401,7 @@
config MICROCODE
tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ select FW_LOADER
---help---
If you say Y here and also to "/dev file system support" in the
'File systems' section, you will be able to update the microcode on
@@ -417,6 +417,11 @@
To compile this driver as a module, choose M here: the
module will be called microcode.
+config MICROCODE_OLD_INTERFACE
+ bool
+ depends on MICROCODE
+ default y
+
config X86_MSR
tristate "/dev/cpu/*/msr - Model-specific register support"
help
@@ -599,12 +604,10 @@
def_bool y
depends on ARCH_SPARSEMEM_ENABLE
-source "mm/Kconfig"
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
-config HAVE_ARCH_EARLY_PFN_TO_NID
- bool
- default y
- depends on NUMA
+source "mm/Kconfig"
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
@@ -741,8 +744,7 @@
source kernel/Kconfig.hz
config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "kexec system call"
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -763,6 +765,13 @@
depends on HIGHMEM
help
Generate crash dump after being started by kexec.
+ This should be normally only set in special crash dump kernels
+ which are loaded in the main kernel with kexec-tools into
+ a specially reserved region and then later executed after
+ a crash by kdump/kexec. The crash dump kernel must be compiled
+ to a memory address not used by the main kernel or BIOS using
+ PHYSICAL_START.
+ For more details see Documentation/kdump/kdump.txt
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 3e4adb1..7cc0b18 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -46,6 +46,14 @@
# a lot more stack due to the lack of sharing of stacklots:
CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+# do binutils support CFI?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+
+# is .cfi_signal_frame supported too?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+
CFLAGS += $(cflags-y)
# Default subarch .c files
diff --git a/arch/i386/boot/edd.S b/arch/i386/boot/edd.S
index 4b84ea2..3432136 100644
--- a/arch/i386/boot/edd.S
+++ b/arch/i386/boot/edd.S
@@ -15,42 +15,95 @@
#include <asm/setup.h>
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+
+# It is assumed that %ds == INITSEG here
+
movb $0, (EDD_MBR_SIG_NR_BUF)
movb $0, (EDDNR)
-# Check the command line for two options:
+# Check the command line for options:
# edd=of disables EDD completely (edd=off)
# edd=sk skips the MBR test (edd=skipmbr)
+# edd=on re-enables EDD (edd=on)
+
pushl %esi
- cmpl $0, %cs:cmd_line_ptr
- jz done_cl
+ movw $edd_mbr_sig_start, %di # Default to edd=on
+
movl %cs:(cmd_line_ptr), %esi
-# ds:esi has the pointer to the command line now
- movl $(COMMAND_LINE_SIZE-7), %ecx
-# loop through kernel command line one byte at a time
-cl_loop:
- cmpl $EDD_CL_EQUALS, (%si)
+ andl %esi, %esi
+ jz old_cl # Old boot protocol?
+
+# Convert to a real-mode pointer in fs:si
+ movl %esi, %eax
+ shrl $4, %eax
+ movw %ax, %fs
+ andw $0xf, %si
+ jmp have_cl_pointer
+
+# Old-style boot protocol?
+old_cl:
+ push %ds # aka INITSEG
+ pop %fs
+
+ cmpw $0xa33f, (0x20)
+ jne done_cl # No command line at all?
+ movw (0x22), %si # Pointer relative to INITSEG
+
+# fs:si has the pointer to the command line now
+have_cl_pointer:
+
+# Loop through kernel command line one byte at a time. Just in
+# case the loader is buggy and failed to null-terminate the command line
+# terminate if we get close enough to the end of the segment that we
+# cannot fit "edd=XX"...
+cl_atspace:
+ cmpw $-5, %si # Watch for segment wraparound
+ jae done_cl
+ movl %fs:(%si), %eax
+ andb %al, %al # End of line?
+ jz done_cl
+ cmpl $EDD_CL_EQUALS, %eax
jz found_edd_equals
- incl %esi
- loop cl_loop
- jmp done_cl
+ cmpb $0x20, %al # <= space consider whitespace
+ ja cl_skipword
+ incw %si
+ jmp cl_atspace
+
+cl_skipword:
+ cmpw $-5, %si # Watch for segment wraparound
+ jae done_cl
+ movb %fs:(%si), %al # End of string?
+ andb %al, %al
+ jz done_cl
+ cmpb $0x20, %al
+ jbe cl_atspace
+ incw %si
+ jmp cl_skipword
+
found_edd_equals:
# only looking at first two characters after equals
- addl $4, %esi
- cmpw $EDD_CL_OFF, (%si) # edd=of
- jz do_edd_off
- cmpw $EDD_CL_SKIP, (%si) # edd=sk
- jz do_edd_skipmbr
- jmp done_cl
+# late overrides early on the command line, so keep going after finding something
+ movw %fs:4(%si), %ax
+ cmpw $EDD_CL_OFF, %ax # edd=of
+ je do_edd_off
+ cmpw $EDD_CL_SKIP, %ax # edd=sk
+ je do_edd_skipmbr
+ cmpw $EDD_CL_ON, %ax # edd=on
+ je do_edd_on
+ jmp cl_skipword
do_edd_skipmbr:
- popl %esi
- jmp edd_start
+ movw $edd_start, %di
+ jmp cl_skipword
do_edd_off:
- popl %esi
- jmp edd_done
+ movw $edd_done, %di
+ jmp cl_skipword
+do_edd_on:
+ movw $edd_mbr_sig_start, %di
+ jmp cl_skipword
+
done_cl:
popl %esi
-
+ jmpw *%di
# Read the first sector of each BIOS disk device and store the 4-byte signature
edd_mbr_sig_start:
diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
index d2b684c..3aec4538 100644
--- a/arch/i386/boot/setup.S
+++ b/arch/i386/boot/setup.S
@@ -494,12 +494,12 @@
movw %cs, %ax # aka SETUPSEG
subw $DELTA_INITSEG, %ax # aka INITSEG
movw %ax, %ds
- movw $0, (0x1ff) # default is no pointing device
+ movb $0, (0x1ff) # default is no pointing device
int $0x11 # int 0x11: equipment list
testb $0x04, %al # check if mouse installed
jz no_psmouse
- movw $0xAA, (0x1ff) # device present
+ movb $0xAA, (0x1ff) # device present
no_psmouse:
#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index 89ebb7a..1a29bfa 100644
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -1,41 +1,51 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18-git5
+# Tue Sep 26 09:30:47 2006
#
CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -45,11 +55,9 @@
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -60,41 +68,45 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
+CONFIG_STOP_MACHINE=y
#
# Block layer
#
-# CONFIG_LBD is not set
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
-CONFIG_X86_PC=y
+CONFIG_SMP=y
+# CONFIG_X86_PC is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_GENERICARCH=y
# CONFIG_X86_ES7000 is not set
+CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
@@ -102,11 +114,11 @@
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
+CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
-CONFIG_MK7=y
+# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
@@ -117,10 +129,10 @@
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
@@ -131,26 +143,28 @@
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
-# CONFIG_HPET_TIMER is not set
-# CONFIG_SMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
+CONFIG_NR_CPUS=32
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
+CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
-# CONFIG_X86_MCE_P4THERMAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
+CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
+CONFIG_MICROCODE=y
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=y
#
# Firmware Drivers
@@ -158,68 +172,67 @@
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
+# CONFIG_NOHIGHMEM is not set
+CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
+# CONFIG_IRQBALANCE is not set
CONFIG_REGPARM=y
-# CONFIG_SECCOMP is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
+CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ=250
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
-CONFIG_DOUBLEFAULT=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_COMPAT_VDSO=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
-# CONFIG_ACPI_SLEEP is not set
-# CONFIG_ACPI_AC is not set
-# CONFIG_ACPI_BATTERY is not set
-# CONFIG_ACPI_BUTTON is not set
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_PROCESSOR is not set
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BLACKLIST_YEAR=2001
+CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
-# CONFIG_X86_PM_TIMER is not set
+CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
@@ -230,7 +243,41 @@
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=y
+# CONFIG_X86_POWERNOW_K6 is not set
+# CONFIG_X86_POWERNOW_K7 is not set
+CONFIG_X86_POWERNOW_K8=y
+CONFIG_X86_POWERNOW_K8_ACPI=y
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+# CONFIG_X86_SPEEDSTEP_ICH is not set
+# CONFIG_X86_SPEEDSTEP_SMI is not set
+# CONFIG_X86_P4_CLOCKMOD is not set
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+# CONFIG_X86_LONGRUN is not set
+# CONFIG_X86_LONGHAUL is not set
+
+#
+# shared options
+#
+CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
+# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -244,12 +291,13 @@
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY_PROC is not set
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
+CONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -278,93 +326,54 @@
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
+# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=y
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-CONFIG_NETFILTER_XT_MATCH_LIMIT=y
-CONFIG_NETFILTER_XT_MATCH_MAC=y
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=y
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=y
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_SUBTREES is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -389,7 +398,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -402,6 +410,7 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -416,7 +425,9 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -431,13 +442,7 @@
#
# Parallel port support
#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
+# CONFIG_PARPORT is not set
#
# Plug and Play support
@@ -447,8 +452,7 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
+CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -459,8 +463,11 @@
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -476,7 +483,7 @@
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -486,10 +493,10 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
+CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
@@ -500,7 +507,7 @@
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
@@ -511,7 +518,7 @@
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -521,7 +528,7 @@
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
@@ -533,6 +540,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
@@ -541,8 +549,9 @@
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
@@ -553,29 +562,44 @@
# CONFIG_SCSI_LOGGING is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_DEBUG_ENABLE=y
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_RESET_DELAY_MS=4000
+# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -584,11 +608,9 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
@@ -598,22 +620,114 @@
# CONFIG_SCSI_DEBUG is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SVW=y
+CONFIG_ATA_PIIX=y
+# CONFIG_SATA_MV is not set
+CONFIG_SATA_NV=y
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+CONFIG_SATA_VIA=y
+# CONFIG_SATA_VITESSE is not set
+CONFIG_SATA_INTEL_COMBINED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
# Multi-device support (RAID and LVM)
#
-# CONFIG_MD is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
+#
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE1394_SBP2 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394_DV1394 is not set
+CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
@@ -652,46 +766,63 @@
#
# Tulip family network device support
#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
+CONFIG_B44=y
+CONFIG_FORCEDETH=y
+# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
+CONFIG_SKY2=y
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
+CONFIG_TIGON3=y
+CONFIG_BNX2=y
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
@@ -699,6 +830,7 @@
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
@@ -716,14 +848,15 @@
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@@ -745,8 +878,8 @@
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
@@ -776,7 +909,6 @@
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
@@ -788,14 +920,15 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-# CONFIG_SERIAL_8250_ACPI is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -804,14 +937,11 @@
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
#
# IPMI
@@ -822,8 +952,12 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
+CONFIG_HW_RANDOM_GEODE=y
+CONFIG_HW_RANDOM_VIA=y
+# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@@ -833,31 +967,28 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_INTEL is not set
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
-CONFIG_AGP_VIA=y
+# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
-CONFIG_DRM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-CONFIG_DRM_RADEON=y
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
+# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
@@ -868,59 +999,7 @@
#
# I2C support
#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_ISA=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-CONFIG_I2C_VIAPRO=y
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C is not set
#
# SPI support
@@ -931,51 +1010,12 @@
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-CONFIG_SENSORS_IT87=y
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
@@ -983,117 +1023,31 @@
# CONFIG_IBM_ASM is not set
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
-CONFIG_VIDEO_DEV=y
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_W9966 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-CONFIG_VIDEO_SAA7134=y
-# CONFIG_VIDEO_SAA7134_ALSA is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
-CONFIG_VIDEO_TUNER=y
-CONFIG_VIDEO_BUF=y
-CONFIG_VIDEO_IR=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VESA is not set
-CONFIG_VIDEO_SELECT=y
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_VIRTUAL is not set
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
+CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -1104,97 +1058,30 @@
#
# Advanced Linux Sound Architecture
#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_SEQUENCER_OSS is not set
-CONFIG_SND_RTCTIMER=y
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_VIA82XX=y
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND is not set
#
# Open Sound System
#
-# CONFIG_SOUND_PRIME is not set
+CONFIG_SOUND_PRIME=y
+CONFIG_OSS_OBSOLETE_DRIVER=y
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_ES1371 is not set
+CONFIG_SOUND_ICH=y
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_SOUND_OSS is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -1213,17 +1100,19 @@
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1248,21 +1137,17 @@
#
# USB Input Devices
#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
@@ -1277,21 +1162,6 @@
# CONFIG_USB_MICROTEK is not set
#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -1299,12 +1169,11 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
#
# USB port drivers
#
-# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
@@ -1321,10 +1190,12 @@
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
@@ -1344,56 +1215,96 @@
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
#
#
-# EDAC - error detection and reporting (RAS)
+# DMA Devices
#
-# CONFIG_EDAC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
@@ -1404,10 +1315,9 @@
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -1430,13 +1340,26 @@
#
# Network File Systems
#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1445,33 +1368,18 @@
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
@@ -1491,7 +1399,7 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -1510,20 +1418,50 @@
#
# Instrumentation Support
#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_FRAME_POINTER is not set
+CONFIG_UNWIND_INFO=y
+CONFIG_STACK_UNWIND=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_RODATA is not set
+# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
+CONFIG_DOUBLEFAULT=y
#
# Security options
@@ -1537,10 +1475,6 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
# CONFIG_CRC_CCITT is not set
@@ -1548,7 +1482,12 @@
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 5427a84..1a884b6 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -4,7 +4,7 @@
extra-y := head.o init_task.o vmlinux.lds
-obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
+obj-y := process.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o bootflag.o \
quirks.o i8237.o topology.o alternative.o i8253.o tsc.o
@@ -81,4 +81,5 @@
$(call if_changed,syscall)
k8-y += ../../x86_64/kernel/k8.o
+stacktrace-y += ../../x86_64/kernel/stacktrace.o
diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile
index 7e9ac99..7f7be01 100644
--- a/arch/i386/kernel/acpi/Makefile
+++ b/arch/i386/kernel/acpi/Makefile
@@ -1,5 +1,7 @@
obj-$(CONFIG_ACPI) += boot.o
+ifneq ($(CONFIG_PCI),)
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
+endif
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index ee003bc..1aaea6a 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -26,9 +26,12 @@
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/efi.h>
+#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
@@ -36,11 +39,17 @@
#include <asm/io.h>
#include <asm/mpspec.h>
+static int __initdata acpi_force = 0;
+
+#ifdef CONFIG_ACPI
+int acpi_disabled = 0;
+#else
+int acpi_disabled = 1;
+#endif
+EXPORT_SYMBOL(acpi_disabled);
+
#ifdef CONFIG_X86_64
-extern void __init clustered_apic_check(void);
-
-extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
@@ -506,16 +515,76 @@
#ifdef CONFIG_ACPI_HOTPLUG_CPU
int acpi_map_lsapic(acpi_handle handle, int *pcpu)
{
- /* TBD */
- return -EINVAL;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ struct acpi_table_lapic *lapic;
+ cpumask_t tmp_map, new_map;
+ u8 physid;
+ int cpu;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
+ return -EINVAL;
+
+ if (!buffer.length || !buffer.pointer)
+ return -EINVAL;
+
+ obj = buffer.pointer;
+ if (obj->type != ACPI_TYPE_BUFFER ||
+ obj->buffer.length < sizeof(*lapic)) {
+ kfree(buffer.pointer);
+ return -EINVAL;
+ }
+
+ lapic = (struct acpi_table_lapic *)obj->buffer.pointer;
+
+ if ((lapic->header.type != ACPI_MADT_LAPIC) ||
+ (!lapic->flags.enabled)) {
+ kfree(buffer.pointer);
+ return -EINVAL;
+ }
+
+ physid = lapic->id;
+
+ kfree(buffer.pointer);
+ buffer.length = ACPI_ALLOCATE_BUFFER;
+ buffer.pointer = NULL;
+
+ tmp_map = cpu_present_map;
+ mp_register_lapic(physid, lapic->flags.enabled);
+
+ /*
+ * If mp_register_lapic successfully generates a new logical cpu
+ * number, then the following will get us exactly what was mapped
+ */
+ cpus_andnot(new_map, cpu_present_map, tmp_map);
+ if (cpus_empty(new_map)) {
+ printk ("Unable to map lapic to logical cpu number\n");
+ return -EINVAL;
+ }
+
+ cpu = first_cpu(new_map);
+
+ *pcpu = cpu;
+ return 0;
}
EXPORT_SYMBOL(acpi_map_lsapic);
int acpi_unmap_lsapic(int cpu)
{
- /* TBD */
- return -EINVAL;
+ int i;
+
+ for_each_possible_cpu(i) {
+ if (x86_acpiid_to_apicid[i] == x86_cpu_to_apicid[cpu]) {
+ x86_acpiid_to_apicid[i] = -1;
+ break;
+ }
+ }
+ x86_cpu_to_apicid[cpu] = -1;
+ cpu_clear(cpu, cpu_present_map);
+ num_processors--;
+
+ return (0);
}
EXPORT_SYMBOL(acpi_unmap_lsapic);
@@ -579,6 +648,8 @@
static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
{
struct acpi_table_hpet *hpet_tbl;
+ struct resource *hpet_res;
+ resource_size_t res_start;
if (!phys || !size)
return -EINVAL;
@@ -594,12 +665,26 @@
"memory.\n");
return -1;
}
+
+#define HPET_RESOURCE_NAME_SIZE 9
+ hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
+ if (hpet_res) {
+ memset(hpet_res, 0, sizeof(*hpet_res));
+ hpet_res->name = (void *)&hpet_res[1];
+ hpet_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE,
+ "HPET %u", hpet_tbl->number);
+ hpet_res->end = (1 * 1024) - 1;
+ }
+
#ifdef CONFIG_X86_64
vxtime.hpet_address = hpet_tbl->addr.addrl |
((long)hpet_tbl->addr.addrh << 32);
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
hpet_tbl->id, vxtime.hpet_address);
+
+ res_start = vxtime.hpet_address;
#else /* X86 */
{
extern unsigned long hpet_address;
@@ -607,9 +692,17 @@
hpet_address = hpet_tbl->addr.addrl;
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
hpet_tbl->id, hpet_address);
+
+ res_start = hpet_address;
}
#endif /* X86 */
+ if (hpet_res) {
+ hpet_res->start = res_start;
+ hpet_res->end += res_start;
+ insert_resource(&iomem_resource, hpet_res);
+ }
+
return 0;
}
#else
@@ -860,8 +953,6 @@
return;
}
-extern int acpi_force;
-
#ifdef __i386__
static int __init disable_acpi_irq(struct dmi_system_id *d)
@@ -1163,3 +1254,75 @@
return 0;
}
+
+static int __init parse_acpi(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ /* "acpi=off" disables both ACPI table parsing and interpreter */
+ if (strcmp(arg, "off") == 0) {
+ disable_acpi();
+ }
+ /* acpi=force to over-ride black-list */
+ else if (strcmp(arg, "force") == 0) {
+ acpi_force = 1;
+ acpi_ht = 1;
+ acpi_disabled = 0;
+ }
+ /* acpi=strict disables out-of-spec workarounds */
+ else if (strcmp(arg, "strict") == 0) {
+ acpi_strict = 1;
+ }
+ /* Limit ACPI just to boot-time to enable HT */
+ else if (strcmp(arg, "ht") == 0) {
+ if (!acpi_force)
+ disable_acpi();
+ acpi_ht = 1;
+ }
+ /* "acpi=noirq" disables ACPI interrupt routing */
+ else if (strcmp(arg, "noirq") == 0) {
+ acpi_noirq_set();
+ } else {
+ /* Core will printk when we return error. */
+ return -EINVAL;
+ }
+ return 0;
+}
+early_param("acpi", parse_acpi);
+
+/* FIXME: Using pci= for an ACPI parameter is a travesty. */
+static int __init parse_pci(char *arg)
+{
+ if (arg && strcmp(arg, "noacpi") == 0)
+ acpi_disable_pci();
+ return 0;
+}
+early_param("pci", parse_pci);
+
+#ifdef CONFIG_X86_IO_APIC
+static int __init parse_acpi_skip_timer_override(char *arg)
+{
+ acpi_skip_timer_override = 1;
+ return 0;
+}
+early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override);
+#endif /* CONFIG_X86_IO_APIC */
+
+static int __init setup_acpi_sci(char *s)
+{
+ if (!s)
+ return -EINVAL;
+ if (!strcmp(s, "edge"))
+ acpi_sci_flags.trigger = 1;
+ else if (!strcmp(s, "level"))
+ acpi_sci_flags.trigger = 3;
+ else if (!strcmp(s, "high"))
+ acpi_sci_flags.polarity = 1;
+ else if (!strcmp(s, "low"))
+ acpi_sci_flags.polarity = 3;
+ else
+ return -EINVAL;
+ return 0;
+}
+early_param("acpi_sci", setup_acpi_sci);
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
index 1649a17..fe799b1 100644
--- a/arch/i386/kernel/acpi/earlyquirk.c
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -48,7 +48,11 @@
int num, slot, func;
/* Assume the machine supports type 1. If not it will
- always read ffffffff and should not have any side effect. */
+ always read ffffffff and should not have any side effect.
+ Actually a few buggy systems can machine check. Allow the user
+ to disable it by command line option at least -AK */
+ if (!early_pci_allowed())
+ return;
/* Poor man's PCI discovery */
for (num = 0; num < 32; num++) {
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 8c844d0..90faae5 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -52,7 +52,18 @@
/*
* Knob to control our willingness to enable the local APIC.
*/
-int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+
+static inline void lapic_disable(void)
+{
+ enable_local_apic = -1;
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+}
+
+static inline void lapic_enable(void)
+{
+ enable_local_apic = 1;
+}
/*
* Debug level
@@ -586,8 +597,7 @@
printk("No ESR for 82489DX.\n");
}
- if (nmi_watchdog == NMI_LOCAL_APIC)
- setup_apic_nmi_watchdog();
+ setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
@@ -1373,3 +1383,18 @@
return 0;
}
+
+static int __init parse_lapic(char *arg)
+{
+ lapic_enable();
+ return 0;
+}
+early_param("lapic", parse_lapic);
+
+static int __init parse_nolapic(char *arg)
+{
+ lapic_disable();
+ return 0;
+}
+early_param("nolapic", parse_nolapic);
+
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index e6a2d6b..e475809 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -22,7 +22,7 @@
extern void vide(void);
__asm__(".align 4\nvide: ret");
-static void __init init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
{
u32 l, h;
int mbytes = num_physpages >> (20-PAGE_SHIFT);
@@ -246,7 +246,7 @@
num_cache_leaves = 3;
}
-static unsigned int amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
{
/* AMD errata T13 (order #21922) */
if ((c->x86 == 6)) {
@@ -259,7 +259,7 @@
return size;
}
-static struct cpu_dev amd_cpu_dev __initdata = {
+static struct cpu_dev amd_cpu_dev __cpuinitdata = {
.c_vendor = "AMD",
.c_ident = { "AuthenticAMD" },
.c_models = {
@@ -275,7 +275,6 @@
},
},
.c_init = init_amd,
- .c_identify = generic_identify,
.c_size_cache = amd_size_cache,
};
diff --git a/arch/i386/kernel/cpu/centaur.c b/arch/i386/kernel/cpu/centaur.c
index bd75629..8c25047 100644
--- a/arch/i386/kernel/cpu/centaur.c
+++ b/arch/i386/kernel/cpu/centaur.c
@@ -9,7 +9,7 @@
#ifdef CONFIG_X86_OOSTORE
-static u32 __init power2(u32 x)
+static u32 __cpuinit power2(u32 x)
{
u32 s=1;
while(s<=x)
@@ -22,7 +22,7 @@
* Set up an actual MCR
*/
-static void __init centaur_mcr_insert(int reg, u32 base, u32 size, int key)
+static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
{
u32 lo, hi;
@@ -40,7 +40,7 @@
* Shortcut: We know you can't put 4Gig of RAM on a winchip
*/
-static u32 __init ramtop(void) /* 16388 */
+static u32 __cpuinit ramtop(void) /* 16388 */
{
int i;
u32 top = 0;
@@ -91,7 +91,7 @@
* Compute a set of MCR's to give maximum coverage
*/
-static int __init centaur_mcr_compute(int nr, int key)
+static int __cpuinit centaur_mcr_compute(int nr, int key)
{
u32 mem = ramtop();
u32 root = power2(mem);
@@ -166,7 +166,7 @@
return ct;
}
-static void __init centaur_create_optimal_mcr(void)
+static void __cpuinit centaur_create_optimal_mcr(void)
{
int i;
/*
@@ -189,7 +189,7 @@
wrmsr(MSR_IDT_MCR0+i, 0, 0);
}
-static void __init winchip2_create_optimal_mcr(void)
+static void __cpuinit winchip2_create_optimal_mcr(void)
{
u32 lo, hi;
int i;
@@ -227,7 +227,7 @@
* Handle the MCR key on the Winchip 2.
*/
-static void __init winchip2_unprotect_mcr(void)
+static void __cpuinit winchip2_unprotect_mcr(void)
{
u32 lo, hi;
u32 key;
@@ -239,7 +239,7 @@
wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
}
-static void __init winchip2_protect_mcr(void)
+static void __cpuinit winchip2_protect_mcr(void)
{
u32 lo, hi;
@@ -257,7 +257,7 @@
#define RNG_ENABLED (1 << 3)
#define RNG_ENABLE (1 << 6) /* MSR_VIA_RNG */
-static void __init init_c3(struct cpuinfo_x86 *c)
+static void __cpuinit init_c3(struct cpuinfo_x86 *c)
{
u32 lo, hi;
@@ -303,7 +303,7 @@
display_cacheinfo(c);
}
-static void __init init_centaur(struct cpuinfo_x86 *c)
+static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
enum {
ECX8=1<<1,
@@ -442,7 +442,7 @@
}
}
-static unsigned int centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
{
/* VIA C3 CPUs (670-68F) need further shifting. */
if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
@@ -457,7 +457,7 @@
return size;
}
-static struct cpu_dev centaur_cpu_dev __initdata = {
+static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
.c_vendor = "Centaur",
.c_ident = { "CentaurHauls" },
.c_init = init_centaur,
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 70c87de..2799baa 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -36,7 +36,7 @@
extern int disable_pse;
-static void default_init(struct cpuinfo_x86 * c)
+static void __cpuinit default_init(struct cpuinfo_x86 * c)
{
/* Not much we can do here... */
/* Check if at least it has cpuid */
@@ -49,7 +49,7 @@
}
}
-static struct cpu_dev default_cpu = {
+static struct cpu_dev __cpuinitdata default_cpu = {
.c_init = default_init,
.c_vendor = "Unknown",
};
@@ -265,7 +265,7 @@
}
}
-void __cpuinit generic_identify(struct cpuinfo_x86 * c)
+static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
{
u32 tfms, xlvl;
int ebx;
@@ -675,7 +675,7 @@
#endif
/* Clear %fs and %gs. */
- asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
+ asm volatile ("movl %0, %%fs; movl %0, %%gs" : : "r" (0));
/* Clear all 6 debug registers: */
set_debugreg(0, 0);
diff --git a/arch/i386/kernel/cpu/cpu.h b/arch/i386/kernel/cpu/cpu.h
index 5a1d4f1..2f6432c 100644
--- a/arch/i386/kernel/cpu/cpu.h
+++ b/arch/i386/kernel/cpu/cpu.h
@@ -24,7 +24,5 @@
extern int get_model_name(struct cpuinfo_x86 *c);
extern void display_cacheinfo(struct cpuinfo_x86 *c);
-extern void generic_identify(struct cpuinfo_x86 * c);
-
extern void early_intel_workaround(struct cpuinfo_x86 *c);
diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c
index f03b7f9..c0c3b59 100644
--- a/arch/i386/kernel/cpu/cyrix.c
+++ b/arch/i386/kernel/cpu/cyrix.c
@@ -12,7 +12,7 @@
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static void __init do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
unsigned long flags;
@@ -52,25 +52,25 @@
* Actually since bugs.h doesn't even reference this perhaps someone should
* fix the documentation ???
*/
-static unsigned char Cx86_dir0_msb __initdata = 0;
+static unsigned char Cx86_dir0_msb __cpuinitdata = 0;
-static char Cx86_model[][9] __initdata = {
+static char Cx86_model[][9] __cpuinitdata = {
"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
"M II ", "Unknown"
};
-static char Cx486_name[][5] __initdata = {
+static char Cx486_name[][5] __cpuinitdata = {
"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
"SRx2", "DRx2"
};
-static char Cx486S_name[][4] __initdata = {
+static char Cx486S_name[][4] __cpuinitdata = {
"S", "S2", "Se", "S2e"
};
-static char Cx486D_name[][4] __initdata = {
+static char Cx486D_name[][4] __cpuinitdata = {
"DX", "DX2", "?", "?", "?", "DX4"
};
-static char Cx86_cb[] __initdata = "?.5x Core/Bus Clock";
-static char cyrix_model_mult1[] __initdata = "12??43";
-static char cyrix_model_mult2[] __initdata = "12233445";
+static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock";
+static char cyrix_model_mult1[] __cpuinitdata = "12??43";
+static char cyrix_model_mult2[] __cpuinitdata = "12233445";
/*
* Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
@@ -82,7 +82,7 @@
extern void calibrate_delay(void) __init;
-static void __init check_cx686_slop(struct cpuinfo_x86 *c)
+static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
{
unsigned long flags;
@@ -107,7 +107,7 @@
}
-static void __init set_cx86_reorder(void)
+static void __cpuinit set_cx86_reorder(void)
{
u8 ccr3;
@@ -122,7 +122,7 @@
setCx86(CX86_CCR3, ccr3);
}
-static void __init set_cx86_memwb(void)
+static void __cpuinit set_cx86_memwb(void)
{
u32 cr0;
@@ -137,7 +137,7 @@
setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
}
-static void __init set_cx86_inc(void)
+static void __cpuinit set_cx86_inc(void)
{
unsigned char ccr3;
@@ -158,7 +158,7 @@
* Configure later MediaGX and/or Geode processor.
*/
-static void __init geode_configure(void)
+static void __cpuinit geode_configure(void)
{
unsigned long flags;
u8 ccr3, ccr4;
@@ -184,14 +184,14 @@
#ifdef CONFIG_PCI
-static struct pci_device_id __initdata cyrix_55x0[] = {
+static struct pci_device_id __cpuinitdata cyrix_55x0[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
{ PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
{ },
};
#endif
-static void __init init_cyrix(struct cpuinfo_x86 *c)
+static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
char *buf = c->x86_model_id;
@@ -346,7 +346,7 @@
/*
* Handle National Semiconductor branded processors
*/
-static void __init init_nsc(struct cpuinfo_x86 *c)
+static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
{
/* There may be GX1 processors in the wild that are branded
* NSC and not Cyrix.
@@ -394,7 +394,7 @@
return (unsigned char) (test >> 8) == 0x02;
}
-static void cyrix_identify(struct cpuinfo_x86 * c)
+static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c)
{
/* Detect Cyrix with disabled CPUID */
if ( c->x86 == 4 && test_cyrix_52div() ) {
@@ -427,10 +427,9 @@
local_irq_restore(flags);
}
}
- generic_identify(c);
}
-static struct cpu_dev cyrix_cpu_dev __initdata = {
+static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
.c_vendor = "Cyrix",
.c_ident = { "CyrixInstead" },
.c_init = init_cyrix,
@@ -453,11 +452,10 @@
late_initcall(cyrix_exit_cpu);
-static struct cpu_dev nsc_cpu_dev __initdata = {
+static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
.c_vendor = "NSC",
.c_ident = { "Geode by NSC" },
.c_init = init_nsc,
- .c_identify = generic_identify,
};
int __init nsc_init_cpu(void)
diff --git a/arch/i386/kernel/cpu/intel.c b/arch/i386/kernel/cpu/intel.c
index 5a2e270..94a95aa 100644
--- a/arch/i386/kernel/cpu/intel.c
+++ b/arch/i386/kernel/cpu/intel.c
@@ -198,7 +198,7 @@
}
-static unsigned int intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
{
/* Intel PIII Tualatin. This comes in two flavours.
* One has 256kb of cache, the other 512. We have no way
@@ -263,7 +263,6 @@
},
},
.c_init = init_intel,
- .c_identify = generic_identify,
.c_size_cache = intel_size_cache,
};
diff --git a/arch/i386/kernel/cpu/mcheck/Makefile b/arch/i386/kernel/cpu/mcheck/Makefile
index 30808f3..f1ebe1c 100644
--- a/arch/i386/kernel/cpu/mcheck/Makefile
+++ b/arch/i386/kernel/cpu/mcheck/Makefile
@@ -1,2 +1,2 @@
-obj-y = mce.o k7.o p4.o p5.o p6.o winchip.o
+obj-y = mce.o k7.o p4.o p5.o p6.o winchip.o therm_throt.o
obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
index b95f1b3d..504434a 100644
--- a/arch/i386/kernel/cpu/mcheck/p4.c
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -13,6 +13,8 @@
#include <asm/msr.h>
#include <asm/apic.h>
+#include <asm/therm_throt.h>
+
#include "mce.h"
/* as supported by the P4/Xeon family */
@@ -44,25 +46,12 @@
/* P4/Xeon Thermal transition interrupt handler */
static void intel_thermal_interrupt(struct pt_regs *regs)
{
- u32 l, h;
- unsigned int cpu = smp_processor_id();
- static unsigned long next[NR_CPUS];
+ __u64 msr_val;
ack_APIC_irq();
- if (time_after(next[cpu], jiffies))
- return;
-
- next[cpu] = jiffies + HZ*5;
- rdmsr(MSR_IA32_THERM_STATUS, l, h);
- if (l & 0x1) {
- printk(KERN_EMERG "CPU%d: Temperature above threshold\n", cpu);
- printk(KERN_EMERG "CPU%d: Running in modulated clock mode\n",
- cpu);
- add_taint(TAINT_MACHINE_CHECK);
- } else {
- printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
- }
+ rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
+ therm_throt_process(msr_val & 0x1);
}
/* Thermal interrupt handler for this CPU setup */
@@ -122,10 +111,13 @@
rdmsr (MSR_IA32_MISC_ENABLE, l, h);
wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
-
+
l = apic_read (APIC_LVTTHMR);
apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+
+ /* enable thermal throttle processing */
+ atomic_set(&therm_throt_en, 1);
return;
}
#endif /* CONFIG_X86_MCE_P4THERMAL */
diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c
new file mode 100644
index 0000000..4f43047
--- /dev/null
+++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c
@@ -0,0 +1,180 @@
+/*
+ * linux/arch/i386/kerne/cpu/mcheck/therm_throt.c
+ *
+ * Thermal throttle event support code (such as syslog messaging and rate
+ * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
+ * This allows consistent reporting of CPU thermal throttle events.
+ *
+ * Maintains a counter in /sys that keeps track of the number of thermal
+ * events, such that the user knows how bad the thermal problem might be
+ * (since the logging to syslog and mcelog is rate limited).
+ *
+ * Author: Dmitriy Zavin (dmitriyz@google.com)
+ *
+ * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
+ * Inspired by Ross Biro's and Al Borchers' counter code.
+ */
+
+#include <linux/percpu.h>
+#include <linux/sysdev.h>
+#include <linux/cpu.h>
+#include <asm/cpu.h>
+#include <linux/notifier.h>
+#include <asm/therm_throt.h>
+
+/* How long to wait between reporting thermal events */
+#define CHECK_INTERVAL (300 * HZ)
+
+static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
+static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
+atomic_t therm_throt_en = ATOMIC_INIT(0);
+
+#ifdef CONFIG_SYSFS
+#define define_therm_throt_sysdev_one_ro(_name) \
+ static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
+
+#define define_therm_throt_sysdev_show_func(name) \
+static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev, \
+ char *buf) \
+{ \
+ unsigned int cpu = dev->id; \
+ ssize_t ret; \
+ \
+ preempt_disable(); /* CPU hotplug */ \
+ if (cpu_online(cpu)) \
+ ret = sprintf(buf, "%lu\n", \
+ per_cpu(thermal_throttle_##name, cpu)); \
+ else \
+ ret = 0; \
+ preempt_enable(); \
+ \
+ return ret; \
+}
+
+define_therm_throt_sysdev_show_func(count);
+define_therm_throt_sysdev_one_ro(count);
+
+static struct attribute *thermal_throttle_attrs[] = {
+ &attr_count.attr,
+ NULL
+};
+
+static struct attribute_group thermal_throttle_attr_group = {
+ .attrs = thermal_throttle_attrs,
+ .name = "thermal_throttle"
+};
+#endif /* CONFIG_SYSFS */
+
+/***
+ * therm_throt_process - Process thermal throttling event from interrupt
+ * @curr: Whether the condition is current or not (boolean), since the
+ * thermal interrupt normally gets called both when the thermal
+ * event begins and once the event has ended.
+ *
+ * This function is called by the thermal interrupt after the
+ * IRQ has been acknowledged.
+ *
+ * It will take care of rate limiting and printing messages to the syslog.
+ *
+ * Returns: 0 : Event should NOT be further logged, i.e. still in
+ * "timeout" from previous log message.
+ * 1 : Event should be logged further, and a message has been
+ * printed to the syslog.
+ */
+int therm_throt_process(int curr)
+{
+ unsigned int cpu = smp_processor_id();
+ __u64 tmp_jiffs = get_jiffies_64();
+
+ if (curr)
+ __get_cpu_var(thermal_throttle_count)++;
+
+ if (time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+ return 0;
+
+ __get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
+
+ /* if we just entered the thermal event */
+ if (curr) {
+ printk(KERN_CRIT "CPU%d: Temperature above threshold, "
+ "cpu clock throttled (total events = %lu)\n", cpu,
+ __get_cpu_var(thermal_throttle_count));
+
+ add_taint(TAINT_MACHINE_CHECK);
+ } else {
+ printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
+ }
+
+ return 1;
+}
+
+#ifdef CONFIG_SYSFS
+/* Add/Remove thermal_throttle interface for CPU device */
+static __cpuinit int thermal_throttle_add_dev(struct sys_device * sys_dev)
+{
+ sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+ return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static __cpuinit int thermal_throttle_remove_dev(struct sys_device * sys_dev)
+{
+ sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+ return 0;
+}
+
+/* Mutex protecting device creation against CPU hotplug */
+static DEFINE_MUTEX(therm_cpu_lock);
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb,
+ unsigned long action,
+ void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ mutex_lock(&therm_cpu_lock);
+ switch (action) {
+ case CPU_ONLINE:
+ thermal_throttle_add_dev(sys_dev);
+ break;
+ case CPU_DEAD:
+ thermal_throttle_remove_dev(sys_dev);
+ break;
+ }
+ mutex_unlock(&therm_cpu_lock);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block thermal_throttle_cpu_notifier =
+{
+ .notifier_call = thermal_throttle_cpu_callback,
+};
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static __init int thermal_throttle_init_device(void)
+{
+ unsigned int cpu = 0;
+
+ if (!atomic_read(&therm_throt_en))
+ return 0;
+
+ register_hotcpu_notifier(&thermal_throttle_cpu_notifier);
+
+#ifdef CONFIG_HOTPLUG_CPU
+ mutex_lock(&therm_cpu_lock);
+#endif
+ /* connect live CPUs to sysfs */
+ for_each_online_cpu(cpu)
+ thermal_throttle_add_dev(get_cpu_sysdev(cpu));
+#ifdef CONFIG_HOTPLUG_CPU
+ mutex_unlock(&therm_cpu_lock);
+#endif
+
+ return 0;
+}
+
+device_initcall(thermal_throttle_init_device);
+#endif /* CONFIG_SYSFS */
diff --git a/arch/i386/kernel/cpu/nexgen.c b/arch/i386/kernel/cpu/nexgen.c
index ad87fa5..8bf23cc 100644
--- a/arch/i386/kernel/cpu/nexgen.c
+++ b/arch/i386/kernel/cpu/nexgen.c
@@ -10,7 +10,7 @@
* to have CPUID. (Thanks to Herbert Oppmann)
*/
-static int __init deep_magic_nexgen_probe(void)
+static int __cpuinit deep_magic_nexgen_probe(void)
{
int ret;
@@ -27,21 +27,20 @@
return ret;
}
-static void __init init_nexgen(struct cpuinfo_x86 * c)
+static void __cpuinit init_nexgen(struct cpuinfo_x86 * c)
{
c->x86_cache_size = 256; /* A few had 1 MB... */
}
-static void __init nexgen_identify(struct cpuinfo_x86 * c)
+static void __cpuinit nexgen_identify(struct cpuinfo_x86 * c)
{
/* Detect NexGen with old hypercode */
if ( deep_magic_nexgen_probe() ) {
strcpy(c->x86_vendor_id, "NexGenDriven");
}
- generic_identify(c);
}
-static struct cpu_dev nexgen_cpu_dev __initdata = {
+static struct cpu_dev nexgen_cpu_dev __cpuinitdata = {
.c_vendor = "Nexgen",
.c_ident = { "NexGenDriven" },
.c_models = {
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
index f54a152..76aac08 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/i386/kernel/cpu/proc.c
@@ -46,8 +46,8 @@
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
- "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
+ NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
diff --git a/arch/i386/kernel/cpu/rise.c b/arch/i386/kernel/cpu/rise.c
index d08d5a2..9317f74 100644
--- a/arch/i386/kernel/cpu/rise.c
+++ b/arch/i386/kernel/cpu/rise.c
@@ -5,7 +5,7 @@
#include "cpu.h"
-static void __init init_rise(struct cpuinfo_x86 *c)
+static void __cpuinit init_rise(struct cpuinfo_x86 *c)
{
printk("CPU: Rise iDragon");
if (c->x86_model > 2)
@@ -28,7 +28,7 @@
set_bit(X86_FEATURE_CX8, c->x86_capability);
}
-static struct cpu_dev rise_cpu_dev __initdata = {
+static struct cpu_dev rise_cpu_dev __cpuinitdata = {
.c_vendor = "Rise",
.c_ident = { "RiseRiseRise" },
.c_models = {
diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c
index 7214c9b..4056fb7 100644
--- a/arch/i386/kernel/cpu/transmeta.c
+++ b/arch/i386/kernel/cpu/transmeta.c
@@ -5,7 +5,7 @@
#include <asm/msr.h>
#include "cpu.h"
-static void __init init_transmeta(struct cpuinfo_x86 *c)
+static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
{
unsigned int cap_mask, uk, max, dummy;
unsigned int cms_rev1, cms_rev2;
@@ -85,10 +85,9 @@
#endif
}
-static void __init transmeta_identify(struct cpuinfo_x86 * c)
+static void __cpuinit transmeta_identify(struct cpuinfo_x86 * c)
{
u32 xlvl;
- generic_identify(c);
/* Transmeta-defined flags: level 0x80860001 */
xlvl = cpuid_eax(0x80860000);
@@ -98,7 +97,7 @@
}
}
-static struct cpu_dev transmeta_cpu_dev __initdata = {
+static struct cpu_dev transmeta_cpu_dev __cpuinitdata = {
.c_vendor = "Transmeta",
.c_ident = { "GenuineTMx86", "TransmetaCPU" },
.c_init = init_transmeta,
diff --git a/arch/i386/kernel/cpu/umc.c b/arch/i386/kernel/cpu/umc.c
index 2cd988f..1bf3f87 100644
--- a/arch/i386/kernel/cpu/umc.c
+++ b/arch/i386/kernel/cpu/umc.c
@@ -5,12 +5,8 @@
/* UMC chips appear to be only either 386 or 486, so no special init takes place.
*/
-static void __init init_umc(struct cpuinfo_x86 * c)
-{
-}
-
-static struct cpu_dev umc_cpu_dev __initdata = {
+static struct cpu_dev umc_cpu_dev __cpuinitdata = {
.c_vendor = "UMC",
.c_ident = { "UMC UMC UMC" },
.c_models = {
@@ -21,7 +17,6 @@
}
},
},
- .c_init = init_umc,
};
int __init umc_init_cpu(void)
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index 5b96f03..67d297d 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -22,6 +22,8 @@
#include <asm/nmi.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
+#include <asm/kdebug.h>
+
#include <mach_ipi.h>
@@ -93,16 +95,25 @@
#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
static atomic_t waiting_for_crash_ipi;
-static int crash_nmi_callback(struct pt_regs *regs, int cpu)
+static int crash_nmi_callback(struct notifier_block *self,
+ unsigned long val, void *data)
{
+ struct pt_regs *regs;
struct pt_regs fixed_regs;
+ int cpu;
+
+ if (val != DIE_NMI_IPI)
+ return NOTIFY_OK;
+
+ regs = ((struct die_args *)data)->regs;
+ cpu = raw_smp_processor_id();
/* Don't do anything if this handler is invoked on crashing cpu.
* Otherwise, system will completely hang. Crashing cpu can get
* an NMI if system was initially booted with nmi_watchdog parameter.
*/
if (cpu == crashing_cpu)
- return 1;
+ return NOTIFY_STOP;
local_irq_disable();
if (!user_mode_vm(regs)) {
@@ -125,13 +136,18 @@
send_IPI_allbutself(NMI_VECTOR);
}
+static struct notifier_block crash_nmi_nb = {
+ .notifier_call = crash_nmi_callback,
+};
+
static void nmi_shootdown_cpus(void)
{
unsigned long msecs;
atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
/* Would it be better to replace the trap vector here? */
- set_nmi_callback(crash_nmi_callback);
+ if (register_die_notifier(&crash_nmi_nb))
+ return; /* return what? */
/* Ensure the new callback function is set before sending
* out the NMI
*/
diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index 87f9f60..5a63d6f 100644
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -76,8 +76,15 @@
NT_MASK = 0x00004000
VM_MASK = 0x00020000
+/* These are replaces for paravirtualization */
+#define DISABLE_INTERRUPTS cli
+#define ENABLE_INTERRUPTS sti
+#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
+#define INTERRUPT_RETURN iret
+#define GET_CR0_INTO_EAX movl %cr0, %eax
+
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli; TRACE_IRQS_OFF
+#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF
#else
#define preempt_stop
#define resume_kernel restore_nocheck
@@ -176,18 +183,21 @@
#define RING0_INT_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, 3*4;\
/*CFI_OFFSET cs, -2*4;*/\
CFI_OFFSET eip, -3*4
#define RING0_EC_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, 4*4;\
/*CFI_OFFSET cs, -2*4;*/\
CFI_OFFSET eip, -3*4
#define RING0_PTREGS_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, OLDESP-EBX;\
/*CFI_OFFSET cs, CS-OLDESP;*/\
CFI_OFFSET eip, EIP-OLDESP;\
@@ -233,10 +243,11 @@
check_userspace:
movl EFLAGS(%esp), %eax # mix EFLAGS and CS
movb CS(%esp), %al
- testl $(VM_MASK | 3), %eax
- jz resume_kernel
+ andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+ cmpl $USER_RPL, %eax
+ jb resume_kernel # not returning to v8086 or userspace
ENTRY(resume_userspace)
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
@@ -247,7 +258,7 @@
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- cli
+ DISABLE_INTERRUPTS
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
@@ -267,6 +278,7 @@
# sysenter call handler stub
ENTRY(sysenter_entry)
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA esp, 0
CFI_REGISTER esp, ebp
movl TSS_sysenter_esp0(%esp),%esp
@@ -275,7 +287,7 @@
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
- sti
+ ENABLE_INTERRUPTS
pushl $(__USER_DS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ss, 0*/
@@ -320,7 +332,7 @@
jae syscall_badsys
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp)
- cli
+ DISABLE_INTERRUPTS
TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
@@ -330,8 +342,7 @@
movl OLDESP(%esp), %ecx
xorl %ebp,%ebp
TRACE_IRQS_ON
- sti
- sysexit
+ ENABLE_INTERRUPTS_SYSEXIT
CFI_ENDPROC
@@ -356,7 +367,7 @@
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp) # store the return value
syscall_exit:
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -371,8 +382,8 @@
# See comments in process.c:copy_thread() for details.
movb OLDSS(%esp), %ah
movb CS(%esp), %al
- andl $(VM_MASK | (4 << 8) | 3), %eax
- cmpl $((4 << 8) | 3), %eax
+ andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
CFI_REMEMBER_STATE
je ldt_ss # returning to user-space with LDT SS
restore_nocheck:
@@ -381,11 +392,11 @@
RESTORE_REGS
addl $4, %esp
CFI_ADJUST_CFA_OFFSET -4
-1: iret
+1: INTERRUPT_RETURN
.section .fixup,"ax"
iret_exc:
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS
pushl $0 # no error code
pushl $do_iret_error
jmp error_code
@@ -409,7 +420,7 @@
* dosemu and wine happy. */
subl $8, %esp # reserve space for switch16 pointer
CFI_ADJUST_CFA_OFFSET 8
- cli
+ DISABLE_INTERRUPTS
TRACE_IRQS_OFF
movl %esp, %eax
/* Set up the 16bit stack frame with switch32 pointer on top,
@@ -419,7 +430,7 @@
TRACE_IRQS_IRET
RESTORE_REGS
lss 20+4(%esp), %esp # switch to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
@@ -434,7 +445,7 @@
jz work_notifysig
work_resched:
call schedule
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -490,7 +501,7 @@
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
TRACE_IRQS_ON
- sti # could let do_syscall_trace() call
+ ENABLE_INTERRUPTS # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
@@ -591,11 +602,9 @@
/* The include is where all of the SMP etc. interrupts come from */
#include "entry_arch.h"
-ENTRY(divide_error)
- RING0_INT_FRAME
- pushl $0 # no error code
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_divide_error
+KPROBE_ENTRY(page_fault)
+ RING0_EC_FRAME
+ pushl $do_page_fault
CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
@@ -645,6 +654,7 @@
call *%edi
jmp ret_from_exception
CFI_ENDPROC
+KPROBE_END(page_fault)
ENTRY(coprocessor_error)
RING0_INT_FRAME
@@ -669,7 +679,7 @@
pushl $-1 # mark this as an int
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- movl %cr0, %eax
+ GET_CR0_INTO_EAX
testl $0x4, %eax # EM (math emulation bit)
jne device_not_available_emulate
preempt_stop
@@ -702,9 +712,15 @@
jne ok; \
label: \
movl TSS_sysenter_esp0+offset(%esp),%esp; \
+ CFI_DEF_CFA esp, 0; \
+ CFI_UNDEFINED eip; \
pushfl; \
+ CFI_ADJUST_CFA_OFFSET 4; \
pushl $__KERNEL_CS; \
- pushl $sysenter_past_esp
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $sysenter_past_esp; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ CFI_REL_OFFSET eip, 0
KPROBE_ENTRY(debug)
RING0_INT_FRAME
@@ -720,7 +736,8 @@
call do_debug
jmp ret_from_exception
CFI_ENDPROC
- .previous .text
+KPROBE_END(debug)
+
/*
* NMI is doubly nasty. It can happen _while_ we're handling
* a debug fault, and the debug fault hasn't yet been able to
@@ -729,7 +746,7 @@
* check whether we got an NMI on the debug path where the debug
* fault happened on the sysenter path.
*/
-ENTRY(nmi)
+KPROBE_ENTRY(nmi)
RING0_INT_FRAME
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
@@ -754,6 +771,7 @@
cmpl $sysenter_entry,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
+ /* We have a RING0_INT_FRAME here */
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
@@ -764,9 +782,12 @@
CFI_ENDPROC
nmi_stack_fixup:
+ RING0_INT_FRAME
FIX_STACK(12,nmi_stack_correct, 1)
jmp nmi_stack_correct
+
nmi_debug_stack_check:
+ /* We have a RING0_INT_FRAME here */
cmpw $__KERNEL_CS,16(%esp)
jne nmi_stack_correct
cmpl $debug,(%esp)
@@ -777,8 +798,10 @@
jmp nmi_stack_correct
nmi_16bit_stack:
- RING0_INT_FRAME
- /* create the pointer to lss back */
+ /* We have a RING0_INT_FRAME here.
+ *
+ * create the pointer to lss back
+ */
pushl %ss
CFI_ADJUST_CFA_OFFSET 4
pushl %esp
@@ -799,12 +822,13 @@
call do_nmi
RESTORE_REGS
lss 12+4(%esp), %esp # back to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
CFI_ENDPROC
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
.previous
+KPROBE_END(nmi)
KPROBE_ENTRY(int3)
RING0_INT_FRAME
@@ -816,7 +840,7 @@
call do_int3
jmp ret_from_exception
CFI_ENDPROC
- .previous .text
+KPROBE_END(int3)
ENTRY(overflow)
RING0_INT_FRAME
@@ -881,7 +905,7 @@
CFI_ADJUST_CFA_OFFSET 4
jmp error_code
CFI_ENDPROC
- .previous .text
+KPROBE_END(general_protection)
ENTRY(alignment_check)
RING0_EC_FRAME
@@ -890,13 +914,14 @@
jmp error_code
CFI_ENDPROC
-KPROBE_ENTRY(page_fault)
- RING0_EC_FRAME
- pushl $do_page_fault
+ENTRY(divide_error)
+ RING0_INT_FRAME
+ pushl $0 # no error code
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_divide_error
CFI_ADJUST_CFA_OFFSET 4
jmp error_code
CFI_ENDPROC
- .previous .text
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
@@ -949,6 +974,19 @@
ENDPROC(arch_unwind_init_running)
#endif
+ENTRY(kernel_thread_helper)
+ pushl $0 # fake return address for unwinder
+ CFI_STARTPROC
+ movl %edx,%eax
+ push %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ call *%ebx
+ push %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ call do_exit
+ CFI_ENDPROC
+ENDPROC(kernel_thread_helper)
+
.section .rodata,"a"
#include "syscall_table.S"
diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
index a6b8bd8..be9d883 100644
--- a/arch/i386/kernel/head.S
+++ b/arch/i386/kernel/head.S
@@ -371,8 +371,65 @@
addl $8,%edi
dec %ecx
jne rp_sidt
+
+.macro set_early_handler handler,trapno
+ lea \handler,%edx
+ movl $(__KERNEL_CS << 16),%eax
+ movw %dx,%ax
+ movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
+ lea idt_table,%edi
+ movl %eax,8*\trapno(%edi)
+ movl %edx,8*\trapno+4(%edi)
+.endm
+
+ set_early_handler handler=early_divide_err,trapno=0
+ set_early_handler handler=early_illegal_opcode,trapno=6
+ set_early_handler handler=early_protection_fault,trapno=13
+ set_early_handler handler=early_page_fault,trapno=14
+
ret
+early_divide_err:
+ xor %edx,%edx
+ pushl $0 /* fake errcode */
+ jmp early_fault
+
+early_illegal_opcode:
+ movl $6,%edx
+ pushl $0 /* fake errcode */
+ jmp early_fault
+
+early_protection_fault:
+ movl $13,%edx
+ jmp early_fault
+
+early_page_fault:
+ movl $14,%edx
+ jmp early_fault
+
+early_fault:
+ cld
+#ifdef CONFIG_PRINTK
+ movl $(__KERNEL_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ cmpl $2,early_recursion_flag
+ je hlt_loop
+ incl early_recursion_flag
+ movl %cr2,%eax
+ pushl %eax
+ pushl %edx /* trapno */
+ pushl $fault_msg
+#ifdef CONFIG_EARLY_PRINTK
+ call early_printk
+#else
+ call printk
+#endif
+#endif
+hlt_loop:
+ hlt
+ jmp hlt_loop
+
/* This is the default interrupt "handler" :-) */
ALIGN
ignore_int:
@@ -386,6 +443,9 @@
movl $(__KERNEL_DS),%eax
movl %eax,%ds
movl %eax,%es
+ cmpl $2,early_recursion_flag
+ je hlt_loop
+ incl early_recursion_flag
pushl 16(%esp)
pushl 24(%esp)
pushl 32(%esp)
@@ -431,9 +491,16 @@
ready: .byte 0
+early_recursion_flag:
+ .long 0
+
int_msg:
.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
+fault_msg:
+ .ascii "Int %d: CR2 %p err %p EIP %p CS %p flags %p\n"
+ .asciz "Stack: %p %p %p %p %p %p %p %p\n"
+
/*
* The IDT and GDT 'descriptors' are a strange 48-bit object
* only used by the lidt and lgdt instructions. They are not
diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c
index d4756d1..ea5f4e7 100644
--- a/arch/i386/kernel/i8259.c
+++ b/arch/i386/kernel/i8259.c
@@ -45,6 +45,8 @@
#define shutdown_8259A_irq disable_8259A_irq
+static int i8259A_auto_eoi;
+
static void mask_and_ack_8259A(unsigned int);
unsigned int startup_8259A_irq(unsigned int irq)
@@ -253,7 +255,7 @@
static int i8259A_resume(struct sys_device *dev)
{
- init_8259A(0);
+ init_8259A(i8259A_auto_eoi);
restore_ELCR(irq_trigger);
return 0;
}
@@ -301,6 +303,8 @@
{
unsigned long flags;
+ i8259A_auto_eoi = auto_eoi;
+
spin_lock_irqsave(&i8259A_lock, flags);
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 4fb32c5..fd0df75 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -40,6 +40,7 @@
#include <asm/nmi.h>
#include <mach_apic.h>
+#include <mach_apicdef.h>
#include "io_ports.h"
@@ -65,7 +66,7 @@
*/
int nr_ioapic_registers[MAX_IO_APICS];
-int disable_timer_pin_1 __initdata;
+static int disable_timer_pin_1 __initdata;
/*
* Rough estimation of how many shared IRQs there are, can
@@ -93,6 +94,34 @@
#define vector_to_irq(vector) (vector)
#endif
+
+union entry_union {
+ struct { u32 w1, w2; };
+ struct IO_APIC_route_entry entry;
+};
+
+static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
+{
+ union entry_union eu;
+ unsigned long flags;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
+ eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ return eu.entry;
+}
+
+static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+ unsigned long flags;
+ union entry_union eu;
+ eu.entry = e;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+ io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
/*
* The common case is 1:1 IRQ<->pin mappings. Sometimes there are
* shared ISA-space IRQs, so we have to support them. We are super
@@ -200,13 +229,9 @@
static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
{
struct IO_APIC_route_entry entry;
- unsigned long flags;
/* Check delivery_mode to be sure we're not clearing an SMI pin */
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry = ioapic_read_entry(apic, pin);
if (entry.delivery_mode == dest_SMI)
return;
@@ -215,10 +240,7 @@
*/
memset(&entry, 0, sizeof(entry));
entry.mask = 1;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry);
}
static void clear_IO_APIC (void)
@@ -1283,9 +1305,8 @@
if (!apic && (irq < 16))
disable_8259A_irq(irq);
}
+ ioapic_write_entry(apic, pin, entry);
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
set_native_irq_info(irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -1301,7 +1322,6 @@
static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
{
struct IO_APIC_route_entry entry;
- unsigned long flags;
memset(&entry,0,sizeof(entry));
@@ -1331,10 +1351,7 @@
/*
* Add it to the IO-APIC irq-routing table:
*/
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry);
enable_8259A_irq(0);
}
@@ -1444,10 +1461,7 @@
for (i = 0; i <= reg_01.bits.entries; i++) {
struct IO_APIC_route_entry entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
- *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry = ioapic_read_entry(apic, i);
printk(KERN_DEBUG " %02x %03X %02X ",
i,
@@ -1666,10 +1680,7 @@
/* See if any of the pins is in ExtINT mode */
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
struct IO_APIC_route_entry entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry = ioapic_read_entry(apic, pin);
/* If the interrupt line is enabled and in ExtInt mode
@@ -1726,7 +1737,6 @@
*/
if (ioapic_i8259.pin != -1) {
struct IO_APIC_route_entry entry;
- unsigned long flags;
memset(&entry, 0, sizeof(entry));
entry.mask = 0; /* Enabled */
@@ -1743,12 +1753,7 @@
/*
* Add it to the IO-APIC irq-routing table:
*/
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
- *(((int *)&entry)+1));
- io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
- *(((int *)&entry)+0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
}
disconnect_bsp_APIC(ioapic_i8259.pin != -1);
}
@@ -2213,17 +2218,13 @@
int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
unsigned char save_control, save_freq_select;
- unsigned long flags;
pin = find_isa_irq_pin(8, mp_INT);
apic = find_isa_irq_apic(8, mp_INT);
if (pin == -1)
return;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry0 = ioapic_read_entry(apic, pin);
clear_IO_APIC_pin(apic, pin);
memset(&entry1, 0, sizeof(entry1));
@@ -2236,10 +2237,7 @@
entry1.trigger = 0;
entry1.vector = 0;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry1);
save_control = CMOS_READ(RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
@@ -2258,10 +2256,7 @@
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
clear_IO_APIC_pin(apic, pin);
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry0);
}
int timer_uses_ioapic_pin_0;
@@ -2461,17 +2456,12 @@
{
struct IO_APIC_route_entry *entry;
struct sysfs_ioapic_data *data;
- unsigned long flags;
int i;
data = container_of(dev, struct sysfs_ioapic_data, dev);
entry = data->entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
- *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i);
- *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i);
- }
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
+ entry[i] = ioapic_read_entry(dev->id, i);
return 0;
}
@@ -2493,11 +2483,9 @@
reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
io_apic_write(dev->id, 0, reg_00.raw);
}
- for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
- io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1));
- io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0));
- }
spin_unlock_irqrestore(&ioapic_lock, flags);
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i ++)
+ ioapic_write_entry(dev->id, i, entry[i]);
return 0;
}
@@ -2694,9 +2682,8 @@
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
+ ioapic_write_entry(ioapic, pin, entry);
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -2704,3 +2691,25 @@
}
#endif /* CONFIG_ACPI */
+
+static int __init parse_disable_timer_pin_1(char *arg)
+{
+ disable_timer_pin_1 = 1;
+ return 0;
+}
+early_param("disable_timer_pin_1", parse_disable_timer_pin_1);
+
+static int __init parse_enable_timer_pin_1(char *arg)
+{
+ disable_timer_pin_1 = -1;
+ return 0;
+}
+early_param("enable_timer_pin_1", parse_enable_timer_pin_1);
+
+static int __init parse_noapic(char *arg)
+{
+ /* disable IO-APIC */
+ disable_ioapic_setup();
+ return 0;
+}
+early_param("noapic", parse_noapic);
diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c
index 6b1ae6b..91966ba 100644
--- a/arch/i386/kernel/machine_kexec.c
+++ b/arch/i386/kernel/machine_kexec.c
@@ -9,6 +9,7 @@
#include <linux/mm.h>
#include <linux/kexec.h>
#include <linux/delay.h>
+#include <linux/init.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
@@ -20,70 +21,13 @@
#include <asm/system.h>
#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
-
-#define L0_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L1_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L2_ATTR (_PAGE_PRESENT)
-
-#define LEVEL0_SIZE (1UL << 12UL)
-
-#ifndef CONFIG_X86_PAE
-#define LEVEL1_SIZE (1UL << 22UL)
-static u32 pgtable_level1[1024] PAGE_ALIGNED;
-
-static void identity_map_page(unsigned long address)
-{
- unsigned long level1_index, level2_index;
- u32 *pgtable_level2;
-
- /* Find the current page table */
- pgtable_level2 = __va(read_cr3());
-
- /* Find the indexes of the physical address to identity map */
- level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE;
- level2_index = address / LEVEL1_SIZE;
-
- /* Identity map the page table entry */
- pgtable_level1[level1_index] = address | L0_ATTR;
- pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR;
-
- /* Flush the tlb so the new mapping takes effect.
- * Global tlb entries are not flushed but that is not an issue.
- */
- load_cr3(pgtable_level2);
-}
-
-#else
-#define LEVEL1_SIZE (1UL << 21UL)
-#define LEVEL2_SIZE (1UL << 30UL)
-static u64 pgtable_level1[512] PAGE_ALIGNED;
-static u64 pgtable_level2[512] PAGE_ALIGNED;
-
-static void identity_map_page(unsigned long address)
-{
- unsigned long level1_index, level2_index, level3_index;
- u64 *pgtable_level3;
-
- /* Find the current page table */
- pgtable_level3 = __va(read_cr3());
-
- /* Find the indexes of the physical address to identity map */
- level1_index = (address % LEVEL1_SIZE)/LEVEL0_SIZE;
- level2_index = (address % LEVEL2_SIZE)/LEVEL1_SIZE;
- level3_index = address / LEVEL2_SIZE;
-
- /* Identity map the page table entry */
- pgtable_level1[level1_index] = address | L0_ATTR;
- pgtable_level2[level2_index] = __pa(pgtable_level1) | L1_ATTR;
- set_64bit(&pgtable_level3[level3_index],
- __pa(pgtable_level2) | L2_ATTR);
-
- /* Flush the tlb so the new mapping takes effect.
- * Global tlb entries are not flushed but that is not an issue.
- */
- load_cr3(pgtable_level3);
-}
+static u32 kexec_pgd[1024] PAGE_ALIGNED;
+#ifdef CONFIG_X86_PAE
+static u32 kexec_pmd0[1024] PAGE_ALIGNED;
+static u32 kexec_pmd1[1024] PAGE_ALIGNED;
#endif
+static u32 kexec_pte0[1024] PAGE_ALIGNED;
+static u32 kexec_pte1[1024] PAGE_ALIGNED;
static void set_idt(void *newidt, __u16 limit)
{
@@ -127,16 +71,6 @@
#undef __STR
}
-typedef asmlinkage NORET_TYPE void (*relocate_new_kernel_t)(
- unsigned long indirection_page,
- unsigned long reboot_code_buffer,
- unsigned long start_address,
- unsigned int has_pae) ATTRIB_NORET;
-
-extern const unsigned char relocate_new_kernel[];
-extern void relocate_new_kernel_end(void);
-extern const unsigned int relocate_new_kernel_size;
-
/*
* A architecture hook called to validate the
* proposed image and prepare the control pages
@@ -169,25 +103,29 @@
*/
NORET_TYPE void machine_kexec(struct kimage *image)
{
- unsigned long page_list;
- unsigned long reboot_code_buffer;
-
- relocate_new_kernel_t rnk;
+ unsigned long page_list[PAGES_NR];
+ void *control_page;
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
- /* Compute some offsets */
- reboot_code_buffer = page_to_pfn(image->control_code_page)
- << PAGE_SHIFT;
- page_list = image->head;
+ control_page = page_address(image->control_code_page);
+ memcpy(control_page, relocate_kernel, PAGE_SIZE);
- /* Set up an identity mapping for the reboot_code_buffer */
- identity_map_page(reboot_code_buffer);
-
- /* copy it out */
- memcpy((void *)reboot_code_buffer, relocate_new_kernel,
- relocate_new_kernel_size);
+ page_list[PA_CONTROL_PAGE] = __pa(control_page);
+ page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+ page_list[PA_PGD] = __pa(kexec_pgd);
+ page_list[VA_PGD] = (unsigned long)kexec_pgd;
+#ifdef CONFIG_X86_PAE
+ page_list[PA_PMD_0] = __pa(kexec_pmd0);
+ page_list[VA_PMD_0] = (unsigned long)kexec_pmd0;
+ page_list[PA_PMD_1] = __pa(kexec_pmd1);
+ page_list[VA_PMD_1] = (unsigned long)kexec_pmd1;
+#endif
+ page_list[PA_PTE_0] = __pa(kexec_pte0);
+ page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
+ page_list[PA_PTE_1] = __pa(kexec_pte1);
+ page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
/* The segment registers are funny things, they have both a
* visible and an invisible part. Whenever the visible part is
@@ -206,6 +144,28 @@
set_idt(phys_to_virt(0),0);
/* now call it */
- rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer, image->start, cpu_has_pae);
+ relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
+ image->start, cpu_has_pae);
}
+
+/* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never sets it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+static int __init parse_crashkernel(char *arg)
+{
+ unsigned long size, base;
+ size = memparse(arg, &arg);
+ if (*arg == '@') {
+ base = memparse(arg+1, &arg);
+ /* FIXME: Do I want a sanity check
+ * to validate the memory range?
+ */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ return 0;
+}
+early_param("crashkernel", parse_crashkernel);
diff --git a/arch/i386/kernel/mca.c b/arch/i386/kernel/mca.c
index cd5456f..eb57a85 100644
--- a/arch/i386/kernel/mca.c
+++ b/arch/i386/kernel/mca.c
@@ -42,6 +42,7 @@
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mca.h>
+#include <linux/kprobes.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/proc_fs.h>
@@ -414,7 +415,8 @@
/*--------------------------------------------------------------------*/
-static void mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
+static __kprobes void
+mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
{
int slot = mca_dev->slot;
@@ -444,7 +446,7 @@
/*--------------------------------------------------------------------*/
-static int mca_handle_nmi_callback(struct device *dev, void *data)
+static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data)
{
struct mca_device *mca_dev = to_mca_device(dev);
unsigned char pos5;
@@ -462,7 +464,7 @@
return 0;
}
-void mca_handle_nmi(void)
+void __kprobes mca_handle_nmi(void)
{
/* First try - scan the various adapters and see if a specific
* adapter was responsible for the error.
diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c
index 40b44cc..9b94797 100644
--- a/arch/i386/kernel/microcode.c
+++ b/arch/i386/kernel/microcode.c
@@ -2,6 +2,7 @@
* Intel CPU Microcode Update Driver for Linux
*
* Copyright (C) 2000-2004 Tigran Aivazian
+ * 2006 Shaohua Li <shaohua.li@intel.com>
*
* This driver allows to upgrade microcode on Intel processors
* belonging to IA-32 family - PentiumPro, Pentium II,
@@ -82,6 +83,9 @@
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
#include <asm/msr.h>
#include <asm/uaccess.h>
@@ -91,9 +95,6 @@
MODULE_AUTHOR("Tigran Aivazian <tigran@veritas.com>");
MODULE_LICENSE("GPL");
-static int verbose;
-module_param(verbose, int, 0644);
-
#define MICROCODE_VERSION "1.14a"
#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */
@@ -120,55 +121,40 @@
/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
static DEFINE_MUTEX(microcode_mutex);
-static void __user *user_buffer; /* user area microcode data buffer */
-static unsigned int user_buffer_size; /* it's size */
-
-typedef enum mc_error_code {
- MC_SUCCESS = 0,
- MC_IGNORED = 1,
- MC_NOTFOUND = 2,
- MC_MARKED = 3,
- MC_ALLOCATED = 4,
-} mc_error_code_t;
-
static struct ucode_cpu_info {
+ int valid;
unsigned int sig;
- unsigned int pf, orig_pf;
+ unsigned int pf;
unsigned int rev;
- unsigned int cksum;
- mc_error_code_t err;
microcode_t *mc;
} ucode_cpu_info[NR_CPUS];
-
-static int microcode_open (struct inode *unused1, struct file *unused2)
-{
- return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
-}
-static void collect_cpu_info (void *unused)
+static void collect_cpu_info(int cpu_num)
{
- int cpu_num = smp_processor_id();
struct cpuinfo_x86 *c = cpu_data + cpu_num;
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
unsigned int val[2];
- uci->sig = uci->pf = uci->rev = uci->cksum = 0;
- uci->err = MC_NOTFOUND;
+ /* We should bind the task to the CPU */
+ BUG_ON(raw_smp_processor_id() != cpu_num);
+ uci->pf = uci->rev = 0;
uci->mc = NULL;
+ uci->valid = 1;
if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
cpu_has(c, X86_FEATURE_IA64)) {
- printk(KERN_ERR "microcode: CPU%d not a capable Intel processor\n", cpu_num);
+ printk(KERN_ERR "microcode: CPU%d not a capable Intel "
+ "processor\n", cpu_num);
+ uci->valid = 0;
return;
- } else {
- uci->sig = cpuid_eax(0x00000001);
+ }
- if ((c->x86_model >= 5) || (c->x86 > 6)) {
- /* get processor flags from MSR 0x17 */
- rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
- uci->pf = 1 << ((val[1] >> 18) & 7);
- }
- uci->orig_pf = uci->pf;
+ uci->sig = cpuid_eax(0x00000001);
+
+ if ((c->x86_model >= 5) || (c->x86 > 6)) {
+ /* get processor flags from MSR 0x17 */
+ rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+ uci->pf = 1 << ((val[1] >> 18) & 7);
}
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
@@ -180,218 +166,159 @@
uci->sig, uci->pf, uci->rev);
}
-static inline void mark_microcode_update (int cpu_num, microcode_header_t *mc_header, int sig, int pf, int cksum)
+static inline int microcode_update_match(int cpu_num,
+ microcode_header_t *mc_header, int sig, int pf)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
- pr_debug("Microcode Found.\n");
- pr_debug(" Header Revision 0x%x\n", mc_header->hdrver);
- pr_debug(" Loader Revision 0x%x\n", mc_header->ldrver);
- pr_debug(" Revision 0x%x \n", mc_header->rev);
- pr_debug(" Date %x/%x/%x\n",
- ((mc_header->date >> 24 ) & 0xff),
- ((mc_header->date >> 16 ) & 0xff),
- (mc_header->date & 0xFFFF));
- pr_debug(" Signature 0x%x\n", sig);
- pr_debug(" Type 0x%x Family 0x%x Model 0x%x Stepping 0x%x\n",
- ((sig >> 12) & 0x3),
- ((sig >> 8) & 0xf),
- ((sig >> 4) & 0xf),
- ((sig & 0xf)));
- pr_debug(" Processor Flags 0x%x\n", pf);
- pr_debug(" Checksum 0x%x\n", cksum);
+ if (!sigmatch(sig, uci->sig, pf, uci->pf)
+ || mc_header->rev <= uci->rev)
+ return 0;
+ return 1;
+}
- if (mc_header->rev < uci->rev) {
- if (uci->err == MC_NOTFOUND) {
- uci->err = MC_IGNORED;
- uci->cksum = mc_header->rev;
- } else if (uci->err == MC_IGNORED && uci->cksum < mc_header->rev)
- uci->cksum = mc_header->rev;
- } else if (mc_header->rev == uci->rev) {
- if (uci->err < MC_MARKED) {
- /* notify the caller of success on this cpu */
- uci->err = MC_SUCCESS;
+static int microcode_sanity_check(void *mc)
+{
+ microcode_header_t *mc_header = mc;
+ struct extended_sigtable *ext_header = NULL;
+ struct extended_signature *ext_sig;
+ unsigned long total_size, data_size, ext_table_size;
+ int sum, orig_sum, ext_sigcount = 0, i;
+
+ total_size = get_totalsize(mc_header);
+ data_size = get_datasize(mc_header);
+ if (data_size + MC_HEADER_SIZE > total_size) {
+ printk(KERN_ERR "microcode: error! "
+ "Bad data size in microcode data file\n");
+ return -EINVAL;
+ }
+
+ if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+ printk(KERN_ERR "microcode: error! "
+ "Unknown microcode update format\n");
+ return -EINVAL;
+ }
+ ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+ if (ext_table_size) {
+ if ((ext_table_size < EXT_HEADER_SIZE)
+ || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+ printk(KERN_ERR "microcode: error! "
+ "Small exttable size in microcode data file\n");
+ return -EINVAL;
}
- } else if (uci->err != MC_ALLOCATED || mc_header->rev > uci->mc->hdr.rev) {
- pr_debug("microcode: CPU%d found a matching microcode update with "
- " revision 0x%x (current=0x%x)\n", cpu_num, mc_header->rev, uci->rev);
- uci->cksum = cksum;
- uci->pf = pf; /* keep the original mc pf for cksum calculation */
- uci->err = MC_MARKED; /* found the match */
- for_each_online_cpu(cpu_num) {
- if (ucode_cpu_info + cpu_num != uci
- && ucode_cpu_info[cpu_num].mc == uci->mc) {
- uci->mc = NULL;
- break;
- }
+ ext_header = mc + MC_HEADER_SIZE + data_size;
+ if (ext_table_size != exttable_size(ext_header)) {
+ printk(KERN_ERR "microcode: error! "
+ "Bad exttable size in microcode data file\n");
+ return -EFAULT;
}
- if (uci->mc != NULL) {
- vfree(uci->mc);
- uci->mc = NULL;
+ ext_sigcount = ext_header->count;
+ }
+
+ /* check extended table checksum */
+ if (ext_table_size) {
+ int ext_table_sum = 0;
+ int *ext_tablep = (int *)ext_header;
+
+ i = ext_table_size / DWSIZE;
+ while (i--)
+ ext_table_sum += ext_tablep[i];
+ if (ext_table_sum) {
+ printk(KERN_WARNING "microcode: aborting, "
+ "bad extended signature table checksum\n");
+ return -EINVAL;
}
}
- return;
+
+ /* calculate the checksum */
+ orig_sum = 0;
+ i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+ while (i--)
+ orig_sum += ((int *)mc)[i];
+ if (orig_sum) {
+ printk(KERN_ERR "microcode: aborting, bad checksum\n");
+ return -EINVAL;
+ }
+ if (!ext_table_size)
+ return 0;
+ /* check extended signature checksum */
+ for (i = 0; i < ext_sigcount; i++) {
+ ext_sig = (struct extended_signature *)((void *)ext_header
+ + EXT_HEADER_SIZE + EXT_SIGNATURE_SIZE * i);
+ sum = orig_sum
+ - (mc_header->sig + mc_header->pf + mc_header->cksum)
+ + (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+ if (sum) {
+ printk(KERN_ERR "microcode: aborting, bad checksum\n");
+ return -EINVAL;
+ }
+ }
+ return 0;
}
-static int find_matching_ucodes (void)
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ * return < 0 - error
+ */
+static int get_maching_microcode(void *mc, int cpu)
{
- int cursor = 0;
- int error = 0;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ microcode_header_t *mc_header = mc;
+ struct extended_sigtable *ext_header;
+ unsigned long total_size = get_totalsize(mc_header);
+ int ext_sigcount, i;
+ struct extended_signature *ext_sig;
+ void *new_mc;
- while (cursor + MC_HEADER_SIZE < user_buffer_size) {
- microcode_header_t mc_header;
- void *newmc = NULL;
- int i, sum, cpu_num, allocated_flag, total_size, data_size, ext_table_size;
+ if (microcode_update_match(cpu, mc_header,
+ mc_header->sig, mc_header->pf))
+ goto find;
- if (copy_from_user(&mc_header, user_buffer + cursor, MC_HEADER_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- error = -EFAULT;
- goto out;
- }
+ if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+ return 0;
- total_size = get_totalsize(&mc_header);
- if ((cursor + total_size > user_buffer_size) || (total_size < DEFAULT_UCODE_TOTALSIZE)) {
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- error = -EINVAL;
- goto out;
- }
+ ext_header = (struct extended_sigtable *)(mc +
+ get_datasize(mc_header) + MC_HEADER_SIZE);
+ ext_sigcount = ext_header->count;
+ ext_sig = (struct extended_signature *)((void *)ext_header
+ + EXT_HEADER_SIZE);
+ for (i = 0; i < ext_sigcount; i++) {
+ if (microcode_update_match(cpu, mc_header,
+ ext_sig->sig, ext_sig->pf))
+ goto find;
+ ext_sig++;
+ }
+ return 0;
+find:
+ pr_debug("microcode: CPU %d found a matching microcode update with"
+ " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev);
+ new_mc = vmalloc(total_size);
+ if (!new_mc) {
+ printk(KERN_ERR "microcode: error! Can not allocate memory\n");
+ return -ENOMEM;
+ }
- data_size = get_datasize(&mc_header);
- if ((data_size + MC_HEADER_SIZE > total_size) || (data_size < DEFAULT_UCODE_DATASIZE)) {
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- error = -EINVAL;
- goto out;
- }
+ /* free previous update file */
+ vfree(uci->mc);
- if (mc_header.ldrver != 1 || mc_header.hdrver != 1) {
- printk(KERN_ERR "microcode: error! Unknown microcode update format\n");
- error = -EINVAL;
- goto out;
- }
-
- for_each_online_cpu(cpu_num) {
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
- if (sigmatch(mc_header.sig, uci->sig, mc_header.pf, uci->orig_pf))
- mark_microcode_update(cpu_num, &mc_header, mc_header.sig, mc_header.pf, mc_header.cksum);
- }
-
- ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
- if (ext_table_size) {
- struct extended_sigtable ext_header;
- struct extended_signature ext_sig;
- int ext_sigcount;
-
- if ((ext_table_size < EXT_HEADER_SIZE)
- || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- error = -EINVAL;
- goto out;
- }
- if (copy_from_user(&ext_header, user_buffer + cursor
- + MC_HEADER_SIZE + data_size, EXT_HEADER_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- error = -EFAULT;
- goto out;
- }
- if (ext_table_size != exttable_size(&ext_header)) {
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- error = -EFAULT;
- goto out;
- }
-
- ext_sigcount = ext_header.count;
-
- for (i = 0; i < ext_sigcount; i++) {
- if (copy_from_user(&ext_sig, user_buffer + cursor + MC_HEADER_SIZE + data_size + EXT_HEADER_SIZE
- + EXT_SIGNATURE_SIZE * i, EXT_SIGNATURE_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- error = -EFAULT;
- goto out;
- }
- for_each_online_cpu(cpu_num) {
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
- if (sigmatch(ext_sig.sig, uci->sig, ext_sig.pf, uci->orig_pf)) {
- mark_microcode_update(cpu_num, &mc_header, ext_sig.sig, ext_sig.pf, ext_sig.cksum);
- }
- }
- }
- }
- /* now check if any cpu has matched */
- allocated_flag = 0;
- sum = 0;
- for_each_online_cpu(cpu_num) {
- if (ucode_cpu_info[cpu_num].err == MC_MARKED) {
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
- if (!allocated_flag) {
- allocated_flag = 1;
- newmc = vmalloc(total_size);
- if (!newmc) {
- printk(KERN_ERR "microcode: error! Can not allocate memory\n");
- error = -ENOMEM;
- goto out;
- }
- if (copy_from_user(newmc + MC_HEADER_SIZE,
- user_buffer + cursor + MC_HEADER_SIZE,
- total_size - MC_HEADER_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- vfree(newmc);
- error = -EFAULT;
- goto out;
- }
- memcpy(newmc, &mc_header, MC_HEADER_SIZE);
- /* check extended table checksum */
- if (ext_table_size) {
- int ext_table_sum = 0;
- int * ext_tablep = (((void *) newmc) + MC_HEADER_SIZE + data_size);
- i = ext_table_size / DWSIZE;
- while (i--) ext_table_sum += ext_tablep[i];
- if (ext_table_sum) {
- printk(KERN_WARNING "microcode: aborting, bad extended signature table checksum\n");
- vfree(newmc);
- error = -EINVAL;
- goto out;
- }
- }
-
- /* calculate the checksum */
- i = (MC_HEADER_SIZE + data_size) / DWSIZE;
- while (i--) sum += ((int *)newmc)[i];
- sum -= (mc_header.sig + mc_header.pf + mc_header.cksum);
- }
- ucode_cpu_info[cpu_num].mc = newmc;
- ucode_cpu_info[cpu_num].err = MC_ALLOCATED; /* mc updated */
- if (sum + uci->sig + uci->pf + uci->cksum != 0) {
- printk(KERN_ERR "microcode: CPU%d aborting, bad checksum\n", cpu_num);
- error = -EINVAL;
- goto out;
- }
- }
- }
- cursor += total_size; /* goto the next update patch */
- } /* end of while */
-out:
- return error;
+ memcpy(new_mc, mc, total_size);
+ uci->mc = new_mc;
+ return 1;
}
-static void do_update_one (void * unused)
+static void apply_microcode(int cpu)
{
unsigned long flags;
unsigned int val[2];
- int cpu_num = smp_processor_id();
+ int cpu_num = raw_smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
- if (uci->mc == NULL) {
- if (verbose) {
- if (uci->err == MC_SUCCESS)
- printk(KERN_INFO "microcode: CPU%d already at revision 0x%x\n",
- cpu_num, uci->rev);
- else
- printk(KERN_INFO "microcode: No new microcode data for CPU%d\n", cpu_num);
- }
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu_num != cpu);
+
+ if (uci->mc == NULL)
return;
- }
/* serialize access to the physical write to MSR 0x79 */
spin_lock_irqsave(µcode_update_lock, flags);
@@ -408,68 +335,107 @@
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
- /* notify the caller of success on this cpu */
- uci->err = MC_SUCCESS;
spin_unlock_irqrestore(µcode_update_lock, flags);
- printk(KERN_INFO "microcode: CPU%d updated from revision "
+ if (val[1] != uci->mc->hdr.rev) {
+ printk(KERN_ERR "microcode: CPU%d updated from revision "
+ "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]);
+ return;
+ }
+ pr_debug("microcode: CPU%d updated from revision "
"0x%x to 0x%x, date = %08x \n",
cpu_num, uci->rev, val[1], uci->mc->hdr.date);
- return;
+ uci->rev = val[1];
+}
+
+#ifdef CONFIG_MICROCODE_OLD_INTERFACE
+static void __user *user_buffer; /* user area microcode data buffer */
+static unsigned int user_buffer_size; /* it's size */
+
+static long get_next_ucode(void **mc, long offset)
+{
+ microcode_header_t mc_header;
+ unsigned long total_size;
+
+ /* No more data */
+ if (offset >= user_buffer_size)
+ return 0;
+ if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) {
+ printk(KERN_ERR "microcode: error! Can not read user data\n");
+ return -EFAULT;
+ }
+ total_size = get_totalsize(&mc_header);
+ if (offset + total_size > user_buffer_size) {
+ printk(KERN_ERR "microcode: error! Bad total size in microcode "
+ "data file\n");
+ return -EINVAL;
+ }
+ *mc = vmalloc(total_size);
+ if (!*mc)
+ return -ENOMEM;
+ if (copy_from_user(*mc, user_buffer + offset, total_size)) {
+ printk(KERN_ERR "microcode: error! Can not read user data\n");
+ vfree(*mc);
+ return -EFAULT;
+ }
+ return offset + total_size;
}
static int do_microcode_update (void)
{
- int i, error;
+ long cursor = 0;
+ int error = 0;
+ void *new_mc;
+ int cpu;
+ cpumask_t old;
- if (on_each_cpu(collect_cpu_info, NULL, 1, 1) != 0) {
- printk(KERN_ERR "microcode: Error! Could not run on all processors\n");
- error = -EIO;
- goto out;
- }
+ old = current->cpus_allowed;
- if ((error = find_matching_ucodes())) {
- printk(KERN_ERR "microcode: Error in the microcode data\n");
- goto out_free;
- }
+ while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) {
+ error = microcode_sanity_check(new_mc);
+ if (error)
+ goto out;
+ /*
+ * It's possible the data file has multiple matching ucode,
+ * lets keep searching till the latest version
+ */
+ for_each_online_cpu(cpu) {
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- if (on_each_cpu(do_update_one, NULL, 1, 1) != 0) {
- printk(KERN_ERR "microcode: Error! Could not run on all processors\n");
- error = -EIO;
- }
-
-out_free:
- for_each_online_cpu(i) {
- if (ucode_cpu_info[i].mc) {
- int j;
- void *tmp = ucode_cpu_info[i].mc;
- vfree(tmp);
- for_each_online_cpu(j) {
- if (ucode_cpu_info[j].mc == tmp)
- ucode_cpu_info[j].mc = NULL;
- }
+ if (!uci->valid)
+ continue;
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ error = get_maching_microcode(new_mc, cpu);
+ if (error < 0)
+ goto out;
+ if (error == 1)
+ apply_microcode(cpu);
}
- if (ucode_cpu_info[i].err == MC_IGNORED && verbose)
- printk(KERN_WARNING "microcode: CPU%d not 'upgrading' to earlier revision"
- " 0x%x (current=0x%x)\n", i, ucode_cpu_info[i].cksum, ucode_cpu_info[i].rev);
+ vfree(new_mc);
}
out:
+ if (cursor > 0)
+ vfree(new_mc);
+ if (cursor < 0)
+ error = cursor;
+ set_cpus_allowed(current, old);
return error;
}
+static int microcode_open (struct inode *unused1, struct file *unused2)
+{
+ return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+}
+
static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
{
ssize_t ret;
- if (len < DEFAULT_UCODE_TOTALSIZE) {
- printk(KERN_ERR "microcode: not enough data\n");
- return -EINVAL;
- }
-
if ((len >> PAGE_SHIFT) > num_physpages) {
printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages);
return -EINVAL;
}
+ lock_cpu_hotplug();
mutex_lock(µcode_mutex);
user_buffer = (void __user *) buf;
@@ -480,6 +446,7 @@
ret = (ssize_t)len;
mutex_unlock(µcode_mutex);
+ unlock_cpu_hotplug();
return ret;
}
@@ -496,7 +463,7 @@
.fops = µcode_fops,
};
-static int __init microcode_init (void)
+static int __init microcode_dev_init (void)
{
int error;
@@ -508,6 +475,280 @@
return error;
}
+ return 0;
+}
+
+static void __exit microcode_dev_exit (void)
+{
+ misc_deregister(µcode_dev);
+}
+
+MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
+#else
+#define microcode_dev_init() 0
+#define microcode_dev_exit() do { } while(0)
+#endif
+
+static long get_next_ucode_from_buffer(void **mc, void *buf,
+ unsigned long size, long offset)
+{
+ microcode_header_t *mc_header;
+ unsigned long total_size;
+
+ /* No more data */
+ if (offset >= size)
+ return 0;
+ mc_header = (microcode_header_t *)(buf + offset);
+ total_size = get_totalsize(mc_header);
+
+ if (offset + total_size > size) {
+ printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ return -EINVAL;
+ }
+
+ *mc = vmalloc(total_size);
+ if (!*mc) {
+ printk(KERN_ERR "microcode: error! Can not allocate memory\n");
+ return -ENOMEM;
+ }
+ memcpy(*mc, buf + offset, total_size);
+ return offset + total_size;
+}
+
+/* fake device for request_firmware */
+static struct platform_device *microcode_pdev;
+
+static int cpu_request_microcode(int cpu)
+{
+ char name[30];
+ struct cpuinfo_x86 *c = cpu_data + cpu;
+ const struct firmware *firmware;
+ void *buf;
+ unsigned long size;
+ long offset = 0;
+ int error;
+ void *mc;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+ sprintf(name,"intel-ucode/%02x-%02x-%02x",
+ c->x86, c->x86_model, c->x86_mask);
+ error = request_firmware(&firmware, name, µcode_pdev->dev);
+ if (error) {
+ pr_debug("ucode data file %s load failed\n", name);
+ return error;
+ }
+ buf = (void *)firmware->data;
+ size = firmware->size;
+ while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset))
+ > 0) {
+ error = microcode_sanity_check(mc);
+ if (error)
+ break;
+ error = get_maching_microcode(mc, cpu);
+ if (error < 0)
+ break;
+ /*
+ * It's possible the data file has multiple matching ucode,
+ * lets keep searching till the latest version
+ */
+ if (error == 1) {
+ apply_microcode(cpu);
+ error = 0;
+ }
+ vfree(mc);
+ }
+ if (offset > 0)
+ vfree(mc);
+ if (offset < 0)
+ error = offset;
+ release_firmware(firmware);
+
+ return error;
+}
+
+static void microcode_init_cpu(int cpu)
+{
+ cpumask_t old;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ old = current->cpus_allowed;
+
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ mutex_lock(µcode_mutex);
+ collect_cpu_info(cpu);
+ if (uci->valid)
+ cpu_request_microcode(cpu);
+ mutex_unlock(µcode_mutex);
+ set_cpus_allowed(current, old);
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ mutex_lock(µcode_mutex);
+ uci->valid = 0;
+ vfree(uci->mc);
+ uci->mc = NULL;
+ mutex_unlock(µcode_mutex);
+}
+
+static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+ char *end;
+ unsigned long val = simple_strtoul(buf, &end, 0);
+ int err = 0;
+ int cpu = dev->id;
+
+ if (end == buf)
+ return -EINVAL;
+ if (val == 1) {
+ cpumask_t old;
+
+ old = current->cpus_allowed;
+
+ lock_cpu_hotplug();
+ set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+ mutex_lock(µcode_mutex);
+ if (uci->valid)
+ err = cpu_request_microcode(cpu);
+ mutex_unlock(µcode_mutex);
+ unlock_cpu_hotplug();
+ set_cpus_allowed(current, old);
+ }
+ if (err)
+ return err;
+ return sz;
+}
+
+static ssize_t version_show(struct sys_device *dev, char *buf)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+ return sprintf(buf, "0x%x\n", uci->rev);
+}
+
+static ssize_t pf_show(struct sys_device *dev, char *buf)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+ return sprintf(buf, "0x%x\n", uci->pf);
+}
+
+static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
+static SYSDEV_ATTR(version, 0400, version_show, NULL);
+static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
+
+static struct attribute *mc_default_attrs[] = {
+ &attr_reload.attr,
+ &attr_version.attr,
+ &attr_processor_flags.attr,
+ NULL
+};
+
+static struct attribute_group mc_attr_group = {
+ .attrs = mc_default_attrs,
+ .name = "microcode",
+};
+
+static int mc_sysdev_add(struct sys_device *sys_dev)
+{
+ int cpu = sys_dev->id;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ if (!cpu_online(cpu))
+ return 0;
+ pr_debug("Microcode:CPU %d added\n", cpu);
+ memset(uci, 0, sizeof(*uci));
+ sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
+
+ microcode_init_cpu(cpu);
+ return 0;
+}
+
+static int mc_sysdev_remove(struct sys_device *sys_dev)
+{
+ int cpu = sys_dev->id;
+
+ if (!cpu_online(cpu))
+ return 0;
+ pr_debug("Microcode:CPU %d removed\n", cpu);
+ microcode_fini_cpu(cpu);
+ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ return 0;
+}
+
+static int mc_sysdev_resume(struct sys_device *dev)
+{
+ int cpu = dev->id;
+
+ if (!cpu_online(cpu))
+ return 0;
+ pr_debug("Microcode:CPU %d resumed\n", cpu);
+ /* only CPU 0 will apply ucode here */
+ apply_microcode(0);
+ return 0;
+}
+
+static struct sysdev_driver mc_sysdev_driver = {
+ .add = mc_sysdev_add,
+ .remove = mc_sysdev_remove,
+ .resume = mc_sysdev_resume,
+};
+
+#ifdef CONFIG_HOTPLUG_CPU
+static __cpuinit int
+mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_DOWN_FAILED:
+ mc_sysdev_add(sys_dev);
+ break;
+ case CPU_DOWN_PREPARE:
+ mc_sysdev_remove(sys_dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block mc_cpu_notifier = {
+ .notifier_call = mc_cpu_callback,
+};
+#endif
+
+static int __init microcode_init (void)
+{
+ int error;
+
+ error = microcode_dev_init();
+ if (error)
+ return error;
+ microcode_pdev = platform_device_register_simple("microcode", -1,
+ NULL, 0);
+ if (IS_ERR(microcode_pdev)) {
+ microcode_dev_exit();
+ return PTR_ERR(microcode_pdev);
+ }
+
+ lock_cpu_hotplug();
+ error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+ unlock_cpu_hotplug();
+ if (error) {
+ microcode_dev_exit();
+ platform_device_unregister(microcode_pdev);
+ return error;
+ }
+
+ register_hotcpu_notifier(&mc_cpu_notifier);
+
printk(KERN_INFO
"IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@veritas.com>\n");
return 0;
@@ -515,9 +756,16 @@
static void __exit microcode_exit (void)
{
- misc_deregister(µcode_dev);
+ microcode_dev_exit();
+
+ unregister_hotcpu_notifier(&mc_cpu_notifier);
+
+ lock_cpu_hotplug();
+ sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+ unlock_cpu_hotplug();
+
+ platform_device_unregister(microcode_pdev);
}
module_init(microcode_init)
module_exit(microcode_exit)
-MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index a70b5fa..442aaf8 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -30,6 +30,7 @@
#include <asm/io_apic.h>
#include <mach_apic.h>
+#include <mach_apicdef.h>
#include <mach_mpparse.h>
#include <bios_ebda.h>
@@ -68,7 +69,7 @@
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
/* Internal processor count */
-static unsigned int __devinitdata num_processors;
+unsigned int __cpuinitdata num_processors;
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map;
@@ -228,12 +229,14 @@
mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+#if MAX_MP_BUSSES < 256
if (m->mpc_busid >= MAX_MP_BUSSES) {
printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
" is too large, max. supported is %d\n",
m->mpc_busid, str, MAX_MP_BUSSES - 1);
return;
}
+#endif
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
@@ -293,19 +296,6 @@
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
- /*
- * Well it seems all SMP boards in existence
- * use ExtINT/LVT1 == LINT0 and
- * NMI/LVT2 == LINT1 - the following check
- * will show us if this assumptions is false.
- * Until then we do not have to add baggage.
- */
- if ((m->mpc_irqtype == mp_ExtINT) &&
- (m->mpc_destapiclint != 0))
- BUG();
- if ((m->mpc_irqtype == mp_NMI) &&
- (m->mpc_destapiclint != 1))
- BUG();
}
#ifdef CONFIG_X86_NUMAQ
@@ -822,8 +812,7 @@
#ifdef CONFIG_ACPI
-void __init mp_register_lapic_address (
- u64 address)
+void __init mp_register_lapic_address(u64 address)
{
mp_lapic_addr = (unsigned long) address;
@@ -835,13 +824,10 @@
Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
}
-
-void __devinit mp_register_lapic (
- u8 id,
- u8 enabled)
+void __devinit mp_register_lapic (u8 id, u8 enabled)
{
struct mpc_config_processor processor;
- int boot_cpu = 0;
+ int boot_cpu = 0;
if (MAX_APICS - id <= 0) {
printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
@@ -878,11 +864,9 @@
u32 pin_programmed[4];
} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic (
- int gsi)
+static int mp_find_ioapic (int gsi)
{
- int i = 0;
+ int i = 0;
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
@@ -895,15 +879,11 @@
return -1;
}
-
-void __init mp_register_ioapic (
- u8 id,
- u32 address,
- u32 gsi_base)
+void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
{
- int idx = 0;
- int tmpid;
+ int idx = 0;
+ int tmpid;
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@@ -949,16 +929,10 @@
mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
mp_ioapic_routing[idx].gsi_base,
mp_ioapic_routing[idx].gsi_end);
-
- return;
}
-
-void __init mp_override_legacy_irq (
- u8 bus_irq,
- u8 polarity,
- u8 trigger,
- u32 gsi)
+void __init
+mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
struct mpc_config_intsrc intsrc;
int ioapic = -1;
@@ -996,15 +970,13 @@
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
-
- return;
}
void __init mp_config_acpi_legacy_irqs (void)
{
struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
+ int i = 0;
+ int ioapic = -1;
/*
* Fabricate the legacy ISA bus (bus #31).
@@ -1073,12 +1045,12 @@
#define MAX_GSI_NUM 4096
-int mp_register_gsi (u32 gsi, int triggering, int polarity)
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
- static int pci_irq = 16;
+ int ioapic = -1;
+ int ioapic_pin = 0;
+ int idx, bit = 0;
+ static int pci_irq = 16;
/*
* Mapping between Global System Interrups, which
* represent all possible interrupts, and IRQs
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index acb3514..dbda706 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -21,83 +21,174 @@
#include <linux/sysdev.h>
#include <linux/sysctl.h>
#include <linux/percpu.h>
+#include <linux/dmi.h>
+#include <linux/kprobes.h>
#include <asm/smp.h>
#include <asm/nmi.h>
+#include <asm/kdebug.h>
#include <asm/intel_arch_perfmon.h>
#include "mach_traps.h"
-unsigned int nmi_watchdog = NMI_NONE;
-extern int unknown_nmi_panic;
-static unsigned int nmi_hz = HZ;
-static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
-static unsigned int nmi_p4_cccr_val;
-extern void show_registers(struct pt_regs *regs);
-
-/*
- * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
- * - it may be reserved by some other driver, or not
- * - when not reserved by some other driver, it may be used for
- * the NMI watchdog, or not
- *
- * This is maintained separately from nmi_active because the NMI
- * watchdog may also be driven from the I/O APIC timer.
+/* perfctr_nmi_owner tracks the ownership of the perfctr registers:
+ * evtsel_nmi_owner tracks the ownership of the event selection
+ * - different performance counters/ event selection may be reserved for
+ * different subsystems this reservation system just tries to coordinate
+ * things a little
*/
-static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
-static unsigned int lapic_nmi_owner;
-#define LAPIC_NMI_WATCHDOG (1<<0)
-#define LAPIC_NMI_RESERVED (1<<1)
+static DEFINE_PER_CPU(unsigned long, perfctr_nmi_owner);
+static DEFINE_PER_CPU(unsigned long, evntsel_nmi_owner[3]);
+
+/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
+ * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now)
+ */
+#define NMI_MAX_COUNTER_BITS 66
/* nmi_active:
- * +1: the lapic NMI watchdog is active, but can be disabled
- * 0: the lapic NMI watchdog has not been set up, and cannot
+ * >0: the lapic NMI watchdog is active, but can be disabled
+ * <0: the lapic NMI watchdog has not been set up, and cannot
* be enabled
- * -1: the lapic NMI watchdog is disabled, but can be enabled
+ * 0: the lapic NMI watchdog is disabled, but can be enabled
*/
-int nmi_active;
+atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
-#define K7_EVNTSEL_ENABLE (1 << 22)
-#define K7_EVNTSEL_INT (1 << 20)
-#define K7_EVNTSEL_OS (1 << 17)
-#define K7_EVNTSEL_USR (1 << 16)
-#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
-#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
+unsigned int nmi_watchdog = NMI_DEFAULT;
+static unsigned int nmi_hz = HZ;
-#define P6_EVNTSEL0_ENABLE (1 << 22)
-#define P6_EVNTSEL_INT (1 << 20)
-#define P6_EVNTSEL_OS (1 << 17)
-#define P6_EVNTSEL_USR (1 << 16)
-#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79
-#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED
+struct nmi_watchdog_ctlblk {
+ int enabled;
+ u64 check_bit;
+ unsigned int cccr_msr;
+ unsigned int perfctr_msr; /* the MSR to reset in NMI handler */
+ unsigned int evntsel_msr; /* the MSR to select the events to handle */
+};
+static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk);
-#define MSR_P4_MISC_ENABLE 0x1A0
-#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
-#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
-#define MSR_P4_PERFCTR0 0x300
-#define MSR_P4_CCCR0 0x360
-#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
-#define P4_ESCR_OS (1<<3)
-#define P4_ESCR_USR (1<<2)
-#define P4_CCCR_OVF_PMI0 (1<<26)
-#define P4_CCCR_OVF_PMI1 (1<<27)
-#define P4_CCCR_THRESHOLD(N) ((N)<<20)
-#define P4_CCCR_COMPLEMENT (1<<19)
-#define P4_CCCR_COMPARE (1<<18)
-#define P4_CCCR_REQUIRED (3<<16)
-#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
-#define P4_CCCR_ENABLE (1<<12)
-/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
- CRU_ESCR0 (with any non-null event selector) through a complemented
- max threshold. [IA32-Vol3, Section 14.9.9] */
-#define MSR_P4_IQ_COUNTER0 0x30C
-#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
-#define P4_NMI_IQ_CCCR0 \
- (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \
- P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+/* local prototypes */
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
-#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
-#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
+extern void show_registers(struct pt_regs *regs);
+extern int unknown_nmi_panic;
+
+/* converts an msr to an appropriate reservation bit */
+static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
+{
+ /* returns the bit offset of the performance counter register */
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ return (msr - MSR_K7_PERFCTR0);
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ return (msr - MSR_ARCH_PERFMON_PERFCTR0);
+
+ switch (boot_cpu_data.x86) {
+ case 6:
+ return (msr - MSR_P6_PERFCTR0);
+ case 15:
+ return (msr - MSR_P4_BPU_PERFCTR0);
+ }
+ }
+ return 0;
+}
+
+/* converts an msr to an appropriate reservation bit */
+static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
+{
+ /* returns the bit offset of the event selection register */
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ return (msr - MSR_K7_EVNTSEL0);
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ return (msr - MSR_ARCH_PERFMON_EVENTSEL0);
+
+ switch (boot_cpu_data.x86) {
+ case 6:
+ return (msr - MSR_P6_EVNTSEL0);
+ case 15:
+ return (msr - MSR_P4_BSU_ESCR0);
+ }
+ }
+ return 0;
+}
+
+/* checks for a bit availability (hack for oprofile) */
+int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
+{
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+}
+
+/* checks the an msr for availability */
+int avail_to_resrv_perfctr_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_perfctr_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+}
+
+int reserve_perfctr_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_perfctr_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
+ return 1;
+ return 0;
+}
+
+void release_perfctr_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_perfctr_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
+}
+
+int reserve_evntsel_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_evntsel_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]))
+ return 1;
+ return 0;
+}
+
+void release_evntsel_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_evntsel_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]);
+}
+
+static __cpuinit inline int nmi_known_cpu(void)
+{
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6));
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ return 1;
+ else
+ return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6));
+ }
+ return 0;
+}
#ifdef CONFIG_SMP
/* The performance counters used by NMI_LOCAL_APIC don't trigger when
@@ -125,7 +216,18 @@
unsigned int *prev_nmi_count;
int cpu;
- if (nmi_watchdog == NMI_NONE)
+ /* Enable NMI watchdog for newer systems.
+ Actually it should be safe for most systems before 2004 too except
+ for some IBM systems that corrupt registers when NMI happens
+ during SMM. Unfortunately we don't have more exact information
+ on these and use this coarse check. */
+ if (nmi_watchdog == NMI_DEFAULT && dmi_get_year(DMI_BIOS_DATE) >= 2004)
+ nmi_watchdog = NMI_LOCAL_APIC;
+
+ if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT))
+ return 0;
+
+ if (!atomic_read(&nmi_active))
return 0;
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
@@ -149,25 +251,45 @@
if (!cpu_isset(cpu, cpu_callin_map))
continue;
#endif
+ if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled)
+ continue;
if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
- endflag = 1;
printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
cpu,
prev_nmi_count[cpu],
nmi_count(cpu));
- nmi_active = 0;
- lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
- kfree(prev_nmi_count);
- return -1;
+ per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0;
+ atomic_dec(&nmi_active);
}
}
+ if (!atomic_read(&nmi_active)) {
+ kfree(prev_nmi_count);
+ atomic_set(&nmi_active, -1);
+ return -1;
+ }
endflag = 1;
printk("OK.\n");
/* now that we know it works we can reduce NMI frequency to
something more reasonable; makes a difference in some configs */
- if (nmi_watchdog == NMI_LOCAL_APIC)
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
nmi_hz = 1;
+ /*
+ * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter
+ * are writable, with higher bits sign extending from bit 31.
+ * So, we can only program the counter with 31 bit values and
+ * 32nd bit should be 1, for 33.. to be 1.
+ * Find the appropriate nmi_hz
+ */
+ if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 &&
+ ((u64)cpu_khz * 1000) > 0x7fffffffULL) {
+ u64 count = (u64)cpu_khz * 1000;
+ do_div(count, 0x7fffffffUL);
+ nmi_hz = count + 1;
+ }
+ }
kfree(prev_nmi_count);
return 0;
@@ -181,124 +303,70 @@
get_option(&str, &nmi);
- if (nmi >= NMI_INVALID)
+ if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
return 0;
- if (nmi == NMI_NONE)
- nmi_watchdog = nmi;
/*
* If any other x86 CPU has a local APIC, then
* please test the NMI stuff there and send me the
* missing bits. Right now Intel P6/P4 and AMD K7 only.
*/
- if ((nmi == NMI_LOCAL_APIC) &&
- (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
- nmi_watchdog = nmi;
- if ((nmi == NMI_LOCAL_APIC) &&
- (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
- (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
- nmi_watchdog = nmi;
- /*
- * We can enable the IO-APIC watchdog
- * unconditionally.
- */
- if (nmi == NMI_IO_APIC) {
- nmi_active = 1;
- nmi_watchdog = nmi;
- }
+ if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0))
+ return 0; /* no lapic support */
+ nmi_watchdog = nmi;
return 1;
}
__setup("nmi_watchdog=", setup_nmi_watchdog);
-static void disable_intel_arch_watchdog(void);
-
static void disable_lapic_nmi_watchdog(void)
{
- if (nmi_active <= 0)
+ BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
+
+ if (atomic_read(&nmi_active) <= 0)
return;
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_AMD:
- wrmsr(MSR_K7_EVNTSEL0, 0, 0);
- break;
- case X86_VENDOR_INTEL:
- if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
- disable_intel_arch_watchdog();
- break;
- }
- switch (boot_cpu_data.x86) {
- case 6:
- if (boot_cpu_data.x86_model > 0xd)
- break;
- wrmsr(MSR_P6_EVNTSEL0, 0, 0);
- break;
- case 15:
- if (boot_cpu_data.x86_model > 0x4)
- break;
+ on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
- wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
- wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
- break;
- }
- break;
- }
- nmi_active = -1;
- /* tell do_nmi() and others that we're not active any more */
- nmi_watchdog = 0;
+ BUG_ON(atomic_read(&nmi_active) != 0);
}
static void enable_lapic_nmi_watchdog(void)
{
- if (nmi_active < 0) {
- nmi_watchdog = NMI_LOCAL_APIC;
- setup_apic_nmi_watchdog();
- }
-}
+ BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
-int reserve_lapic_nmi(void)
-{
- unsigned int old_owner;
+ /* are we already enabled */
+ if (atomic_read(&nmi_active) != 0)
+ return;
- spin_lock(&lapic_nmi_owner_lock);
- old_owner = lapic_nmi_owner;
- lapic_nmi_owner |= LAPIC_NMI_RESERVED;
- spin_unlock(&lapic_nmi_owner_lock);
- if (old_owner & LAPIC_NMI_RESERVED)
- return -EBUSY;
- if (old_owner & LAPIC_NMI_WATCHDOG)
- disable_lapic_nmi_watchdog();
- return 0;
-}
+ /* are we lapic aware */
+ if (nmi_known_cpu() <= 0)
+ return;
-void release_lapic_nmi(void)
-{
- unsigned int new_owner;
-
- spin_lock(&lapic_nmi_owner_lock);
- new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
- lapic_nmi_owner = new_owner;
- spin_unlock(&lapic_nmi_owner_lock);
- if (new_owner & LAPIC_NMI_WATCHDOG)
- enable_lapic_nmi_watchdog();
+ on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
+ touch_nmi_watchdog();
}
void disable_timer_nmi_watchdog(void)
{
- if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
+ BUG_ON(nmi_watchdog != NMI_IO_APIC);
+
+ if (atomic_read(&nmi_active) <= 0)
return;
- unset_nmi_callback();
- nmi_active = -1;
- nmi_watchdog = NMI_NONE;
+ disable_irq(0);
+ on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
+
+ BUG_ON(atomic_read(&nmi_active) != 0);
}
void enable_timer_nmi_watchdog(void)
{
- if (nmi_active < 0) {
- nmi_watchdog = NMI_IO_APIC;
+ BUG_ON(nmi_watchdog != NMI_IO_APIC);
+
+ if (atomic_read(&nmi_active) == 0) {
touch_nmi_watchdog();
- nmi_active = 1;
+ on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
+ enable_irq(0);
}
}
@@ -308,15 +376,20 @@
static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
{
- nmi_pm_active = nmi_active;
- disable_lapic_nmi_watchdog();
+ /* only CPU0 goes here, other CPUs should be offline */
+ nmi_pm_active = atomic_read(&nmi_active);
+ stop_apic_nmi_watchdog(NULL);
+ BUG_ON(atomic_read(&nmi_active) != 0);
return 0;
}
static int lapic_nmi_resume(struct sys_device *dev)
{
- if (nmi_pm_active > 0)
- enable_lapic_nmi_watchdog();
+ /* only CPU0 goes here, other CPUs should be offline */
+ if (nmi_pm_active > 0) {
+ setup_apic_nmi_watchdog(NULL);
+ touch_nmi_watchdog();
+ }
return 0;
}
@@ -336,7 +409,13 @@
{
int error;
- if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
+ /* should really be a BUG_ON but b/c this is an
+ * init call, it just doesn't work. -dcz
+ */
+ if (nmi_watchdog != NMI_LOCAL_APIC)
+ return 0;
+
+ if ( atomic_read(&nmi_active) < 0 )
return 0;
error = sysdev_class_register(&nmi_sysclass);
@@ -354,138 +433,269 @@
* Original code written by Keith Owens.
*/
-static void clear_msr_range(unsigned int base, unsigned int n)
-{
- unsigned int i;
-
- for(i = 0; i < n; ++i)
- wrmsr(base+i, 0, 0);
-}
-
-static void write_watchdog_counter(const char *descr)
+static void write_watchdog_counter(unsigned int perfctr_msr, const char *descr)
{
u64 count = (u64)cpu_khz * 1000;
do_div(count, nmi_hz);
if(descr)
Dprintk("setting %s to -0x%08Lx\n", descr, count);
- wrmsrl(nmi_perfctr_msr, 0 - count);
+ wrmsrl(perfctr_msr, 0 - count);
}
-static void setup_k7_watchdog(void)
+/* Note that these events don't tick when the CPU idles. This means
+ the frequency varies with CPU load. */
+
+#define K7_EVNTSEL_ENABLE (1 << 22)
+#define K7_EVNTSEL_INT (1 << 20)
+#define K7_EVNTSEL_OS (1 << 17)
+#define K7_EVNTSEL_USR (1 << 16)
+#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
+#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
+
+static int setup_k7_watchdog(void)
{
+ unsigned int perfctr_msr, evntsel_msr;
unsigned int evntsel;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
- nmi_perfctr_msr = MSR_K7_PERFCTR0;
+ perfctr_msr = MSR_K7_PERFCTR0;
+ evntsel_msr = MSR_K7_EVNTSEL0;
+ if (!reserve_perfctr_nmi(perfctr_msr))
+ goto fail;
- clear_msr_range(MSR_K7_EVNTSEL0, 4);
- clear_msr_range(MSR_K7_PERFCTR0, 4);
+ if (!reserve_evntsel_nmi(evntsel_msr))
+ goto fail1;
+
+ wrmsrl(perfctr_msr, 0UL);
evntsel = K7_EVNTSEL_INT
| K7_EVNTSEL_OS
| K7_EVNTSEL_USR
| K7_NMI_EVENT;
- wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
- write_watchdog_counter("K7_PERFCTR0");
+ /* setup the timer */
+ wrmsr(evntsel_msr, evntsel, 0);
+ write_watchdog_counter(perfctr_msr, "K7_PERFCTR0");
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= K7_EVNTSEL_ENABLE;
- wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
+ wrmsr(evntsel_msr, evntsel, 0);
+
+ wd->perfctr_msr = perfctr_msr;
+ wd->evntsel_msr = evntsel_msr;
+ wd->cccr_msr = 0; //unused
+ wd->check_bit = 1ULL<<63;
+ return 1;
+fail1:
+ release_perfctr_nmi(perfctr_msr);
+fail:
+ return 0;
}
-static void setup_p6_watchdog(void)
+static void stop_k7_watchdog(void)
{
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ wrmsr(wd->evntsel_msr, 0, 0);
+
+ release_evntsel_nmi(wd->evntsel_msr);
+ release_perfctr_nmi(wd->perfctr_msr);
+}
+
+#define P6_EVNTSEL0_ENABLE (1 << 22)
+#define P6_EVNTSEL_INT (1 << 20)
+#define P6_EVNTSEL_OS (1 << 17)
+#define P6_EVNTSEL_USR (1 << 16)
+#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79
+#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED
+
+static int setup_p6_watchdog(void)
+{
+ unsigned int perfctr_msr, evntsel_msr;
unsigned int evntsel;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
- nmi_perfctr_msr = MSR_P6_PERFCTR0;
+ perfctr_msr = MSR_P6_PERFCTR0;
+ evntsel_msr = MSR_P6_EVNTSEL0;
+ if (!reserve_perfctr_nmi(perfctr_msr))
+ goto fail;
- clear_msr_range(MSR_P6_EVNTSEL0, 2);
- clear_msr_range(MSR_P6_PERFCTR0, 2);
+ if (!reserve_evntsel_nmi(evntsel_msr))
+ goto fail1;
+
+ wrmsrl(perfctr_msr, 0UL);
evntsel = P6_EVNTSEL_INT
| P6_EVNTSEL_OS
| P6_EVNTSEL_USR
| P6_NMI_EVENT;
- wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
- write_watchdog_counter("P6_PERFCTR0");
+ /* setup the timer */
+ wrmsr(evntsel_msr, evntsel, 0);
+ write_watchdog_counter(perfctr_msr, "P6_PERFCTR0");
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= P6_EVNTSEL0_ENABLE;
- wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
+ wrmsr(evntsel_msr, evntsel, 0);
+
+ wd->perfctr_msr = perfctr_msr;
+ wd->evntsel_msr = evntsel_msr;
+ wd->cccr_msr = 0; //unused
+ wd->check_bit = 1ULL<<39;
+ return 1;
+fail1:
+ release_perfctr_nmi(perfctr_msr);
+fail:
+ return 0;
}
+static void stop_p6_watchdog(void)
+{
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ wrmsr(wd->evntsel_msr, 0, 0);
+
+ release_evntsel_nmi(wd->evntsel_msr);
+ release_perfctr_nmi(wd->perfctr_msr);
+}
+
+/* Note that these events don't tick when the CPU idles. This means
+ the frequency varies with CPU load. */
+
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
+#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
+#define P4_ESCR_OS (1<<3)
+#define P4_ESCR_USR (1<<2)
+#define P4_CCCR_OVF_PMI0 (1<<26)
+#define P4_CCCR_OVF_PMI1 (1<<27)
+#define P4_CCCR_THRESHOLD(N) ((N)<<20)
+#define P4_CCCR_COMPLEMENT (1<<19)
+#define P4_CCCR_COMPARE (1<<18)
+#define P4_CCCR_REQUIRED (3<<16)
+#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
+#define P4_CCCR_ENABLE (1<<12)
+#define P4_CCCR_OVF (1<<31)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+ CRU_ESCR0 (with any non-null event selector) through a complemented
+ max threshold. [IA32-Vol3, Section 14.9.9] */
+
static int setup_p4_watchdog(void)
{
+ unsigned int perfctr_msr, evntsel_msr, cccr_msr;
+ unsigned int evntsel, cccr_val;
unsigned int misc_enable, dummy;
+ unsigned int ht_num;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
- rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
+ rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy);
if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
return 0;
- nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
- nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
#ifdef CONFIG_SMP
- if (smp_num_siblings == 2)
- nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
+ /* detect which hyperthread we are on */
+ if (smp_num_siblings == 2) {
+ unsigned int ebx, apicid;
+
+ ebx = cpuid_ebx(1);
+ apicid = (ebx >> 24) & 0xff;
+ ht_num = apicid & 1;
+ } else
#endif
+ ht_num = 0;
- if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
- clear_msr_range(0x3F1, 2);
- /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
- docs doesn't fully define it, so leave it alone for now. */
- if (boot_cpu_data.x86_model >= 0x3) {
- /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
- clear_msr_range(0x3A0, 26);
- clear_msr_range(0x3BC, 3);
- } else {
- clear_msr_range(0x3A0, 31);
- }
- clear_msr_range(0x3C0, 6);
- clear_msr_range(0x3C8, 6);
- clear_msr_range(0x3E0, 2);
- clear_msr_range(MSR_P4_CCCR0, 18);
- clear_msr_range(MSR_P4_PERFCTR0, 18);
-
- wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
- wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
- write_watchdog_counter("P4_IQ_COUNTER0");
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
- return 1;
-}
-
-static void disable_intel_arch_watchdog(void)
-{
- unsigned ebx;
-
- /*
- * Check whether the Architectural PerfMon supports
- * Unhalted Core Cycles Event or not.
- * NOTE: Corresponding bit = 0 in ebp indicates event present.
+ /* performance counters are shared resources
+ * assign each hyperthread its own set
+ * (re-use the ESCR0 register, seems safe
+ * and keeps the cccr_val the same)
*/
- ebx = cpuid_ebx(10);
- if (!(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
- wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, 0, 0);
+ if (!ht_num) {
+ /* logical cpu 0 */
+ perfctr_msr = MSR_P4_IQ_PERFCTR0;
+ evntsel_msr = MSR_P4_CRU_ESCR0;
+ cccr_msr = MSR_P4_IQ_CCCR0;
+ cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
+ } else {
+ /* logical cpu 1 */
+ perfctr_msr = MSR_P4_IQ_PERFCTR1;
+ evntsel_msr = MSR_P4_CRU_ESCR0;
+ cccr_msr = MSR_P4_IQ_CCCR1;
+ cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
+ }
+
+ if (!reserve_perfctr_nmi(perfctr_msr))
+ goto fail;
+
+ if (!reserve_evntsel_nmi(evntsel_msr))
+ goto fail1;
+
+ evntsel = P4_ESCR_EVENT_SELECT(0x3F)
+ | P4_ESCR_OS
+ | P4_ESCR_USR;
+
+ cccr_val |= P4_CCCR_THRESHOLD(15)
+ | P4_CCCR_COMPLEMENT
+ | P4_CCCR_COMPARE
+ | P4_CCCR_REQUIRED;
+
+ wrmsr(evntsel_msr, evntsel, 0);
+ wrmsr(cccr_msr, cccr_val, 0);
+ write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0");
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ cccr_val |= P4_CCCR_ENABLE;
+ wrmsr(cccr_msr, cccr_val, 0);
+ wd->perfctr_msr = perfctr_msr;
+ wd->evntsel_msr = evntsel_msr;
+ wd->cccr_msr = cccr_msr;
+ wd->check_bit = 1ULL<<39;
+ return 1;
+fail1:
+ release_perfctr_nmi(perfctr_msr);
+fail:
+ return 0;
}
+static void stop_p4_watchdog(void)
+{
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ wrmsr(wd->cccr_msr, 0, 0);
+ wrmsr(wd->evntsel_msr, 0, 0);
+
+ release_evntsel_nmi(wd->evntsel_msr);
+ release_perfctr_nmi(wd->perfctr_msr);
+}
+
+#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
+#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
+
static int setup_intel_arch_watchdog(void)
{
+ unsigned int ebx;
+ union cpuid10_eax eax;
+ unsigned int unused;
+ unsigned int perfctr_msr, evntsel_msr;
unsigned int evntsel;
- unsigned ebx;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
/*
* Check whether the Architectural PerfMon supports
* Unhalted Core Cycles Event or not.
- * NOTE: Corresponding bit = 0 in ebp indicates event present.
+ * NOTE: Corresponding bit = 0 in ebx indicates event present.
*/
- ebx = cpuid_ebx(10);
- if ((ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
- return 0;
+ cpuid(10, &(eax.full), &ebx, &unused, &unused);
+ if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
+ (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
+ goto fail;
- nmi_perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
+ perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
+ evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
- clear_msr_range(MSR_ARCH_PERFMON_EVENTSEL0, 2);
- clear_msr_range(MSR_ARCH_PERFMON_PERFCTR0, 2);
+ if (!reserve_perfctr_nmi(perfctr_msr))
+ goto fail;
+
+ if (!reserve_evntsel_nmi(evntsel_msr))
+ goto fail1;
+
+ wrmsrl(perfctr_msr, 0UL);
evntsel = ARCH_PERFMON_EVENTSEL_INT
| ARCH_PERFMON_EVENTSEL_OS
@@ -493,51 +703,145 @@
| ARCH_PERFMON_NMI_EVENT_SEL
| ARCH_PERFMON_NMI_EVENT_UMASK;
- wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0);
- write_watchdog_counter("INTEL_ARCH_PERFCTR0");
+ /* setup the timer */
+ wrmsr(evntsel_msr, evntsel, 0);
+ write_watchdog_counter(perfctr_msr, "INTEL_ARCH_PERFCTR0");
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
- wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0);
+ wrmsr(evntsel_msr, evntsel, 0);
+
+ wd->perfctr_msr = perfctr_msr;
+ wd->evntsel_msr = evntsel_msr;
+ wd->cccr_msr = 0; //unused
+ wd->check_bit = 1ULL << (eax.split.bit_width - 1);
return 1;
+fail1:
+ release_perfctr_nmi(perfctr_msr);
+fail:
+ return 0;
}
-void setup_apic_nmi_watchdog (void)
+static void stop_intel_arch_watchdog(void)
{
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_AMD:
- if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
- return;
- setup_k7_watchdog();
- break;
- case X86_VENDOR_INTEL:
- if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
- if (!setup_intel_arch_watchdog())
+ unsigned int ebx;
+ union cpuid10_eax eax;
+ unsigned int unused;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ /*
+ * Check whether the Architectural PerfMon supports
+ * Unhalted Core Cycles Event or not.
+ * NOTE: Corresponding bit = 0 in ebx indicates event present.
+ */
+ cpuid(10, &(eax.full), &ebx, &unused, &unused);
+ if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
+ (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
+ return;
+
+ wrmsr(wd->evntsel_msr, 0, 0);
+ release_evntsel_nmi(wd->evntsel_msr);
+ release_perfctr_nmi(wd->perfctr_msr);
+}
+
+void setup_apic_nmi_watchdog (void *unused)
+{
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ /* only support LOCAL and IO APICs for now */
+ if ((nmi_watchdog != NMI_LOCAL_APIC) &&
+ (nmi_watchdog != NMI_IO_APIC))
+ return;
+
+ if (wd->enabled == 1)
+ return;
+
+ /* cheap hack to support suspend/resume */
+ /* if cpu0 is not active neither should the other cpus */
+ if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
+ return;
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
+ return;
+ if (!setup_k7_watchdog())
return;
break;
- }
- switch (boot_cpu_data.x86) {
- case 6:
- if (boot_cpu_data.x86_model > 0xd)
- return;
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+ if (!setup_intel_arch_watchdog())
+ return;
+ break;
+ }
+ switch (boot_cpu_data.x86) {
+ case 6:
+ if (boot_cpu_data.x86_model > 0xd)
+ return;
- setup_p6_watchdog();
- break;
- case 15:
- if (boot_cpu_data.x86_model > 0x4)
- return;
+ if (!setup_p6_watchdog())
+ return;
+ break;
+ case 15:
+ if (boot_cpu_data.x86_model > 0x4)
+ return;
- if (!setup_p4_watchdog())
+ if (!setup_p4_watchdog())
+ return;
+ break;
+ default:
return;
+ }
break;
default:
return;
}
- break;
- default:
- return;
}
- lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
- nmi_active = 1;
+ wd->enabled = 1;
+ atomic_inc(&nmi_active);
+}
+
+void stop_apic_nmi_watchdog(void *unused)
+{
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ /* only support LOCAL and IO APICs for now */
+ if ((nmi_watchdog != NMI_LOCAL_APIC) &&
+ (nmi_watchdog != NMI_IO_APIC))
+ return;
+
+ if (wd->enabled == 0)
+ return;
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ stop_k7_watchdog();
+ break;
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+ stop_intel_arch_watchdog();
+ break;
+ }
+ switch (boot_cpu_data.x86) {
+ case 6:
+ if (boot_cpu_data.x86_model > 0xd)
+ break;
+ stop_p6_watchdog();
+ break;
+ case 15:
+ if (boot_cpu_data.x86_model > 0x4)
+ break;
+ stop_p4_watchdog();
+ break;
+ }
+ break;
+ default:
+ return;
+ }
+ }
+ wd->enabled = 0;
+ atomic_dec(&nmi_active);
}
/*
@@ -579,7 +883,7 @@
extern void die_nmi(struct pt_regs *, const char *msg);
-void nmi_watchdog_tick (struct pt_regs * regs)
+__kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
{
/*
@@ -588,11 +892,23 @@
* smp_processor_id().
*/
unsigned int sum;
+ int touched = 0;
int cpu = smp_processor_id();
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+ u64 dummy;
+ int rc=0;
+
+ /* check for other users first */
+ if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
+ == NOTIFY_STOP) {
+ rc = 1;
+ touched = 1;
+ }
sum = per_cpu(irq_stat, cpu).apic_timer_irqs;
- if (last_irq_sums[cpu] == sum) {
+ /* if the apic timer isn't firing, this cpu isn't doing much */
+ if (!touched && last_irq_sums[cpu] == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
@@ -607,27 +923,59 @@
last_irq_sums[cpu] = sum;
alert_counter[cpu] = 0;
}
- if (nmi_perfctr_msr) {
- if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
- /*
- * P4 quirks:
- * - An overflown perfctr will assert its interrupt
- * until the OVF flag in its CCCR is cleared.
- * - LVTPC is masked on interrupt and must be
- * unmasked by the LVTPC handler.
+ /* see if the nmi watchdog went off */
+ if (wd->enabled) {
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ rdmsrl(wd->perfctr_msr, dummy);
+ if (dummy & wd->check_bit){
+ /* this wasn't a watchdog timer interrupt */
+ goto done;
+ }
+
+ /* only Intel P4 uses the cccr msr */
+ if (wd->cccr_msr != 0) {
+ /*
+ * P4 quirks:
+ * - An overflown perfctr will assert its interrupt
+ * until the OVF flag in its CCCR is cleared.
+ * - LVTPC is masked on interrupt and must be
+ * unmasked by the LVTPC handler.
+ */
+ rdmsrl(wd->cccr_msr, dummy);
+ dummy &= ~P4_CCCR_OVF;
+ wrmsrl(wd->cccr_msr, dummy);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ }
+ else if (wd->perfctr_msr == MSR_P6_PERFCTR0 ||
+ wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
+ /* P6 based Pentium M need to re-unmask
+ * the apic vector but it doesn't hurt
+ * other P6 variant.
+ * ArchPerfom/Core Duo also needs this */
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ }
+ /* start the cycle over again */
+ write_watchdog_counter(wd->perfctr_msr, NULL);
+ rc = 1;
+ } else if (nmi_watchdog == NMI_IO_APIC) {
+ /* don't know how to accurately check for this.
+ * just assume it was a watchdog timer interrupt
+ * This matches the old behaviour.
*/
- wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
+ rc = 1;
}
- else if (nmi_perfctr_msr == MSR_P6_PERFCTR0 ||
- nmi_perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
- /* Only P6 based Pentium M need to re-unmask
- * the apic vector but it doesn't hurt
- * other P6 variant */
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- }
- write_watchdog_counter(NULL);
}
+done:
+ return rc;
+}
+
+int do_nmi_callback(struct pt_regs * regs, int cpu)
+{
+#ifdef CONFIG_SYSCTL
+ if (unknown_nmi_panic)
+ return unknown_nmi_panic_callback(regs, cpu);
+#endif
+ return 0;
}
#ifdef CONFIG_SYSCTL
@@ -637,36 +985,46 @@
unsigned char reason = get_nmi_reason();
char buf[64];
- if (!(reason & 0xc0)) {
- sprintf(buf, "NMI received for unknown reason %02x\n", reason);
- die_nmi(regs, buf);
- }
+ sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+ die_nmi(regs, buf);
return 0;
}
/*
- * proc handler for /proc/sys/kernel/unknown_nmi_panic
+ * proc handler for /proc/sys/kernel/nmi
*/
-int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file,
+int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
void __user *buffer, size_t *length, loff_t *ppos)
{
int old_state;
- old_state = unknown_nmi_panic;
+ nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
+ old_state = nmi_watchdog_enabled;
proc_dointvec(table, write, file, buffer, length, ppos);
- if (!!old_state == !!unknown_nmi_panic)
+ if (!!old_state == !!nmi_watchdog_enabled)
return 0;
- if (unknown_nmi_panic) {
- if (reserve_lapic_nmi() < 0) {
- unknown_nmi_panic = 0;
- return -EBUSY;
- } else {
- set_nmi_callback(unknown_nmi_panic_callback);
- }
+ if (atomic_read(&nmi_active) < 0) {
+ printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
+ return -EIO;
+ }
+
+ if (nmi_watchdog == NMI_DEFAULT) {
+ if (nmi_known_cpu() > 0)
+ nmi_watchdog = NMI_LOCAL_APIC;
+ else
+ nmi_watchdog = NMI_IO_APIC;
+ }
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ if (nmi_watchdog_enabled)
+ enable_lapic_nmi_watchdog();
+ else
+ disable_lapic_nmi_watchdog();
} else {
- release_lapic_nmi();
- unset_nmi_callback();
+ printk( KERN_WARNING
+ "NMI watchdog doesn't know what hardware to touch\n");
+ return -EIO;
}
return 0;
}
@@ -675,7 +1033,11 @@
EXPORT_SYMBOL(nmi_active);
EXPORT_SYMBOL(nmi_watchdog);
-EXPORT_SYMBOL(reserve_lapic_nmi);
-EXPORT_SYMBOL(release_lapic_nmi);
+EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi);
+EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
+EXPORT_SYMBOL(reserve_perfctr_nmi);
+EXPORT_SYMBOL(release_perfctr_nmi);
+EXPORT_SYMBOL(reserve_evntsel_nmi);
+EXPORT_SYMBOL(release_evntsel_nmi);
EXPORT_SYMBOL(disable_timer_nmi_watchdog);
EXPORT_SYMBOL(enable_timer_nmi_watchdog);
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
index 8657c73..8c190ca 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/i386/kernel/process.c
@@ -37,6 +37,7 @@
#include <linux/kallsyms.h>
#include <linux/ptrace.h>
#include <linux/random.h>
+#include <linux/personality.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
@@ -320,15 +321,6 @@
* the "args".
*/
extern void kernel_thread_helper(void);
-__asm__(".section .text\n"
- ".align 4\n"
- "kernel_thread_helper:\n\t"
- "movl %edx,%eax\n\t"
- "pushl %edx\n\t"
- "call *%ebx\n\t"
- "pushl %eax\n\t"
- "call do_exit\n"
- ".previous");
/*
* Create a kernel thread
@@ -346,7 +338,7 @@
regs.xes = __USER_DS;
regs.orig_eax = -1;
regs.eip = (unsigned long) kernel_thread_helper;
- regs.xcs = __KERNEL_CS;
+ regs.xcs = __KERNEL_CS | get_kernel_rpl();
regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2;
/* Ok, create the new process.. */
@@ -905,7 +897,7 @@
unsigned long arch_align_stack(unsigned long sp)
{
- if (randomize_va_space)
+ if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
sp -= get_random_int() % 8192;
return sp & ~0xf;
}
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
index d3db03f..775f50e 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/i386/kernel/ptrace.c
@@ -185,17 +185,17 @@
return addr;
}
-static inline int is_at_popf(struct task_struct *child, struct pt_regs *regs)
+static inline int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
{
int i, copied;
- unsigned char opcode[16];
+ unsigned char opcode[15];
unsigned long addr = convert_eip_to_linear(child, regs);
copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0);
for (i = 0; i < copied; i++) {
switch (opcode[i]) {
- /* popf */
- case 0x9d:
+ /* popf and iret */
+ case 0x9d: case 0xcf:
return 1;
/* opcode and address size prefixes */
case 0x66: case 0x67:
@@ -247,7 +247,7 @@
* don't mark it as being "us" that set it, so that we
* won't clear it by hand later.
*/
- if (is_at_popf(child, regs))
+ if (is_setting_trap_flag(child, regs))
return;
child->ptrace |= PT_DTRACE;
diff --git a/arch/i386/kernel/relocate_kernel.S b/arch/i386/kernel/relocate_kernel.S
index d312616..f151d6f 100644
--- a/arch/i386/kernel/relocate_kernel.S
+++ b/arch/i386/kernel/relocate_kernel.S
@@ -7,16 +7,138 @@
*/
#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/kexec.h>
- /*
- * Must be relocatable PIC code callable as a C function, that once
- * it starts can not use the previous processes stack.
- */
- .globl relocate_new_kernel
+/*
+ * Must be relocatable PIC code callable as a C function
+ */
+
+#define PTR(x) (x << 2)
+#define PAGE_ALIGNED (1 << PAGE_SHIFT)
+#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
+#define PAE_PGD_ATTR 0x01 /* _PAGE_PRESENT */
+
+ .text
+ .align PAGE_ALIGNED
+ .globl relocate_kernel
+relocate_kernel:
+ movl 8(%esp), %ebp /* list of pages */
+
+#ifdef CONFIG_X86_PAE
+ /* map the control page at its virtual address */
+
+ movl PTR(VA_PGD)(%ebp), %edi
+ movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
+ andl $0xc0000000, %eax
+ shrl $27, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_PMD_0)(%ebp), %edx
+ orl $PAE_PGD_ATTR, %edx
+ movl %edx, (%eax)
+
+ movl PTR(VA_PMD_0)(%ebp), %edi
+ movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
+ andl $0x3fe00000, %eax
+ shrl $18, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_PTE_0)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+
+ movl PTR(VA_PTE_0)(%ebp), %edi
+ movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
+ andl $0x001ff000, %eax
+ shrl $9, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+
+ /* identity map the control page at its physical address */
+
+ movl PTR(VA_PGD)(%ebp), %edi
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
+ andl $0xc0000000, %eax
+ shrl $27, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_PMD_1)(%ebp), %edx
+ orl $PAE_PGD_ATTR, %edx
+ movl %edx, (%eax)
+
+ movl PTR(VA_PMD_1)(%ebp), %edi
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
+ andl $0x3fe00000, %eax
+ shrl $18, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_PTE_1)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+
+ movl PTR(VA_PTE_1)(%ebp), %edi
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
+ andl $0x001ff000, %eax
+ shrl $9, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+#else
+ /* map the control page at its virtual address */
+
+ movl PTR(VA_PGD)(%ebp), %edi
+ movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
+ andl $0xffc00000, %eax
+ shrl $20, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_PTE_0)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+
+ movl PTR(VA_PTE_0)(%ebp), %edi
+ movl PTR(VA_CONTROL_PAGE)(%ebp), %eax
+ andl $0x003ff000, %eax
+ shrl $10, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+
+ /* identity map the control page at its physical address */
+
+ movl PTR(VA_PGD)(%ebp), %edi
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
+ andl $0xffc00000, %eax
+ shrl $20, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_PTE_1)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+
+ movl PTR(VA_PTE_1)(%ebp), %edi
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %eax
+ andl $0x003ff000, %eax
+ shrl $10, %eax
+ addl %edi, %eax
+
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %edx
+ orl $PAGE_ATTR, %edx
+ movl %edx, (%eax)
+#endif
+
relocate_new_kernel:
/* read the arguments and say goodbye to the stack */
movl 4(%esp), %ebx /* page_list */
- movl 8(%esp), %ebp /* reboot_code_buffer */
+ movl 8(%esp), %ebp /* list of pages */
movl 12(%esp), %edx /* start address */
movl 16(%esp), %ecx /* cpu_has_pae */
@@ -24,11 +146,26 @@
pushl $0
popfl
- /* set a new stack at the bottom of our page... */
- lea 4096(%ebp), %esp
+ /* get physical address of control page now */
+ /* this is impossible after page table switch */
+ movl PTR(PA_CONTROL_PAGE)(%ebp), %edi
- /* store the parameters back on the stack */
- pushl %edx /* store the start address */
+ /* switch to new set of page tables */
+ movl PTR(PA_PGD)(%ebp), %eax
+ movl %eax, %cr3
+
+ /* setup a new stack at the end of the physical control page */
+ lea 4096(%edi), %esp
+
+ /* jump to identity mapped page */
+ movl %edi, %eax
+ addl $(identity_mapped - relocate_kernel), %eax
+ pushl %eax
+ ret
+
+identity_mapped:
+ /* store the start address on the stack */
+ pushl %edx
/* Set cr0 to a known state:
* 31 0 == Paging disabled
@@ -113,8 +250,3 @@
xorl %edi, %edi
xorl %ebp, %ebp
ret
-relocate_new_kernel_end:
-
- .globl relocate_new_kernel_size
-relocate_new_kernel_size:
- .long relocate_new_kernel_end - relocate_new_kernel
diff --git a/arch/i386/kernel/semaphore.c b/arch/i386/kernel/semaphore.c
deleted file mode 100644
index 98352c3..0000000
--- a/arch/i386/kernel/semaphore.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * i386 semaphore implementation.
- *
- * (C) Copyright 1999 Linus Torvalds
- *
- * Portions Copyright 1999 Red Hat, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
- */
-#include <asm/semaphore.h>
-
-/*
- * The semaphore operations have a special calling sequence that
- * allow us to do a simpler in-line version of them. These routines
- * need to convert that sequence back into the C sequence when
- * there is contention on the semaphore.
- *
- * %eax contains the semaphore pointer on entry. Save the C-clobbered
- * registers (%eax, %edx and %ecx) except %eax whish is either a return
- * value or just clobbered..
- */
-asm(
-".section .sched.text\n"
-".align 4\n"
-".globl __down_failed\n"
-"__down_failed:\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "pushl %ebp\n\t"
- "movl %esp,%ebp\n\t"
-#endif
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __down\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "movl %ebp,%esp\n\t"
- "popl %ebp\n\t"
-#endif
- "ret"
-);
-
-asm(
-".section .sched.text\n"
-".align 4\n"
-".globl __down_failed_interruptible\n"
-"__down_failed_interruptible:\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "pushl %ebp\n\t"
- "movl %esp,%ebp\n\t"
-#endif
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __down_interruptible\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "movl %ebp,%esp\n\t"
- "popl %ebp\n\t"
-#endif
- "ret"
-);
-
-asm(
-".section .sched.text\n"
-".align 4\n"
-".globl __down_failed_trylock\n"
-"__down_failed_trylock:\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "pushl %ebp\n\t"
- "movl %esp,%ebp\n\t"
-#endif
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __down_trylock\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
-#if defined(CONFIG_FRAME_POINTER)
- "movl %ebp,%esp\n\t"
- "popl %ebp\n\t"
-#endif
- "ret"
-);
-
-asm(
-".section .sched.text\n"
-".align 4\n"
-".globl __up_wakeup\n"
-"__up_wakeup:\n\t"
- "pushl %edx\n\t"
- "pushl %ecx\n\t"
- "call __up\n\t"
- "popl %ecx\n\t"
- "popl %edx\n\t"
- "ret"
-);
-
-/*
- * rw spinlock fallbacks
- */
-#if defined(CONFIG_SMP)
-asm(
-".section .sched.text\n"
-".align 4\n"
-".globl __write_lock_failed\n"
-"__write_lock_failed:\n\t"
- LOCK_PREFIX "addl $" RW_LOCK_BIAS_STR ",(%eax)\n"
-"1: rep; nop\n\t"
- "cmpl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
- "jne 1b\n\t"
- LOCK_PREFIX "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
- "jnz __write_lock_failed\n\t"
- "ret"
-);
-
-asm(
-".section .sched.text\n"
-".align 4\n"
-".globl __read_lock_failed\n"
-"__read_lock_failed:\n\t"
- LOCK_PREFIX "incl (%eax)\n"
-"1: rep; nop\n\t"
- "cmpl $1,(%eax)\n\t"
- "js 1b\n\t"
- LOCK_PREFIX "decl (%eax)\n\t"
- "js __read_lock_failed\n\t"
- "ret"
-);
-#endif
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 16d9944..814cdeb 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -90,18 +90,6 @@
unsigned long mmu_cr4_features;
-#ifdef CONFIG_ACPI
- int acpi_disabled = 0;
-#else
- int acpi_disabled = 1;
-#endif
-EXPORT_SYMBOL(acpi_disabled);
-
-#ifdef CONFIG_ACPI
-int __initdata acpi_force = 0;
-extern acpi_interrupt_flags acpi_sci_flags;
-#endif
-
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
#ifdef CONFIG_MCA
@@ -149,7 +137,6 @@
struct e820map e820;
extern void early_cpu_init(void);
-extern void generic_apic_probe(char *);
extern int root_mountflags;
unsigned long saved_videomode;
@@ -701,238 +688,132 @@
}
#endif
-static void __init parse_cmdline_early (char ** cmdline_p)
+static int __initdata user_defined_memmap = 0;
+
+/*
+ * "mem=nopentium" disables the 4MB page tables.
+ * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+ * to <mem>, overriding the bios size.
+ * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+ * <start> to <start>+<mem>, overriding the bios size.
+ *
+ * HPA tells me bootloaders need to parse mem=, so no new
+ * option should be mem= [also see Documentation/i386/boot.txt]
+ */
+static int __init parse_mem(char *arg)
{
- char c = ' ', *to = command_line, *from = saved_command_line;
- int len = 0;
- int userdef = 0;
+ if (!arg)
+ return -EINVAL;
- /* Save unparsed command line copy for /proc/cmdline */
- saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
-
- for (;;) {
- if (c != ' ')
- goto next_char;
- /*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem= [also see Documentation/i386/boot.txt]
+ if (strcmp(arg, "nopentium") == 0) {
+ clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+ disable_pse = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
*/
- if (!memcmp(from, "mem=", 4)) {
- if (to != command_line)
- to--;
- if (!memcmp(from+4, "nopentium", 9)) {
- from += 9+4;
- clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
- disable_pse = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long mem_size;
+ unsigned long long mem_size;
- mem_size = memparse(from+4, &from);
- limit_regions(mem_size);
- userdef=1;
- }
- }
-
- else if (!memcmp(from, "memmap=", 7)) {
- if (to != command_line)
- to--;
- if (!memcmp(from+7, "exactmap", 8)) {
-#ifdef CONFIG_CRASH_DUMP
- /* If we are doing a crash dump, we
- * still need to know the real mem
- * size before original memory map is
- * reset.
- */
- find_max_pfn();
- saved_max_pfn = max_pfn;
-#endif
- from += 8+7;
- e820.nr_map = 0;
- userdef = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long start_at, mem_size;
-
- mem_size = memparse(from+7, &from);
- if (*from == '@') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_RAM);
- } else if (*from == '#') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_ACPI);
- } else if (*from == '$') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_RESERVED);
- } else {
- limit_regions(mem_size);
- userdef=1;
- }
- }
- }
-
- else if (!memcmp(from, "noexec=", 7))
- noexec_setup(from + 7);
-
-
-#ifdef CONFIG_X86_SMP
- /*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
- else if (!memcmp(from, "maxcpus=", 8)) {
- extern unsigned int maxcpus;
-
- maxcpus = simple_strtoul(from + 8, NULL, 0);
- }
-#endif
-
-#ifdef CONFIG_ACPI
- /* "acpi=off" disables both ACPI table parsing and interpreter */
- else if (!memcmp(from, "acpi=off", 8)) {
- disable_acpi();
- }
-
- /* acpi=force to over-ride black-list */
- else if (!memcmp(from, "acpi=force", 10)) {
- acpi_force = 1;
- acpi_ht = 1;
- acpi_disabled = 0;
- }
-
- /* acpi=strict disables out-of-spec workarounds */
- else if (!memcmp(from, "acpi=strict", 11)) {
- acpi_strict = 1;
- }
-
- /* Limit ACPI just to boot-time to enable HT */
- else if (!memcmp(from, "acpi=ht", 7)) {
- if (!acpi_force)
- disable_acpi();
- acpi_ht = 1;
- }
-
- /* "pci=noacpi" disable ACPI IRQ routing and PCI scan */
- else if (!memcmp(from, "pci=noacpi", 10)) {
- acpi_disable_pci();
- }
- /* "acpi=noirq" disables ACPI interrupt routing */
- else if (!memcmp(from, "acpi=noirq", 10)) {
- acpi_noirq_set();
- }
-
- else if (!memcmp(from, "acpi_sci=edge", 13))
- acpi_sci_flags.trigger = 1;
-
- else if (!memcmp(from, "acpi_sci=level", 14))
- acpi_sci_flags.trigger = 3;
-
- else if (!memcmp(from, "acpi_sci=high", 13))
- acpi_sci_flags.polarity = 1;
-
- else if (!memcmp(from, "acpi_sci=low", 12))
- acpi_sci_flags.polarity = 3;
-
-#ifdef CONFIG_X86_IO_APIC
- else if (!memcmp(from, "acpi_skip_timer_override", 24))
- acpi_skip_timer_override = 1;
-
- if (!memcmp(from, "disable_timer_pin_1", 19))
- disable_timer_pin_1 = 1;
- if (!memcmp(from, "enable_timer_pin_1", 18))
- disable_timer_pin_1 = -1;
-
- /* disable IO-APIC */
- else if (!memcmp(from, "noapic", 6))
- disable_ioapic_setup();
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
-
-#ifdef CONFIG_X86_LOCAL_APIC
- /* enable local APIC */
- else if (!memcmp(from, "lapic", 5))
- lapic_enable();
-
- /* disable local APIC */
- else if (!memcmp(from, "nolapic", 6))
- lapic_disable();
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#ifdef CONFIG_KEXEC
- /* crashkernel=size@addr specifies the location to reserve for
- * a crash kernel. By reserving this memory we guarantee
- * that linux never set's it up as a DMA target.
- * Useful for holding code to do something appropriate
- * after a kernel panic.
- */
- else if (!memcmp(from, "crashkernel=", 12)) {
- unsigned long size, base;
- size = memparse(from+12, &from);
- if (*from == '@') {
- base = memparse(from+1, &from);
- /* FIXME: Do I want a sanity check
- * to validate the memory range?
- */
- crashk_res.start = base;
- crashk_res.end = base + size - 1;
- }
- }
-#endif
-#ifdef CONFIG_PROC_VMCORE
- /* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
- else if (!memcmp(from, "elfcorehdr=", 11))
- elfcorehdr_addr = memparse(from+11, &from);
-#endif
-
- /*
- * highmem=size forces highmem to be exactly 'size' bytes.
- * This works even on boxes that have no highmem otherwise.
- * This also works to reduce highmem size on bigger boxes.
- */
- else if (!memcmp(from, "highmem=", 8))
- highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT;
-
- /*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the
- * vmalloc area - the default is 128m.
- */
- else if (!memcmp(from, "vmalloc=", 8))
- __VMALLOC_RESERVE = memparse(from+8, &from);
-
- next_char:
- c = *(from++);
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *(to++) = c;
+ mem_size = memparse(arg, &arg);
+ limit_regions(mem_size);
+ user_defined_memmap = 1;
}
- *to = '\0';
- *cmdline_p = command_line;
- if (userdef) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- print_memory_map("user");
- }
+ return 0;
}
+early_param("mem", parse_mem);
+
+static int __init parse_memmap(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ if (strcmp(arg, "exactmap") == 0) {
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we
+ * still need to know the real mem
+ * size before original memory map is
+ * reset.
+ */
+ find_max_pfn();
+ saved_max_pfn = max_pfn;
+#endif
+ e820.nr_map = 0;
+ user_defined_memmap = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
+ */
+ unsigned long long start_at, mem_size;
+
+ mem_size = memparse(arg, &arg);
+ if (*arg == '@') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, E820_RAM);
+ } else if (*arg == '#') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, E820_ACPI);
+ } else if (*arg == '$') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, E820_RESERVED);
+ } else {
+ limit_regions(mem_size);
+ user_defined_memmap = 1;
+ }
+ }
+ return 0;
+}
+early_param("memmap", parse_memmap);
+
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ elfcorehdr_addr = memparse(arg, &arg);
+ return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif /* CONFIG_PROC_VMCORE */
+
+/*
+ * highmem=size forces highmem to be exactly 'size' bytes.
+ * This works even on boxes that have no highmem otherwise.
+ * This also works to reduce highmem size on bigger boxes.
+ */
+static int __init parse_highmem(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
+ return 0;
+}
+early_param("highmem", parse_highmem);
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the
+ * vmalloc area - the default is 128m.
+ */
+static int __init parse_vmalloc(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ __VMALLOC_RESERVE = memparse(arg, &arg);
+ return 0;
+}
+early_param("vmalloc", parse_vmalloc);
/*
* reservetop=size reserves a hole at the top of the kernel address space which
@@ -1189,6 +1070,14 @@
}
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
+ num_physpages = highend_pfn;
+ high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+ num_physpages = max_low_pfn;
+ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
+#endif
+#ifdef CONFIG_FLATMEM
+ max_mapnr = num_physpages;
#endif
printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
pages_to_mb(max_low_pfn));
@@ -1200,22 +1089,20 @@
void __init zone_sizes_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES] = { 0, };
- unsigned int max_dma, low;
-
- max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
- low = max_low_pfn;
-
- if (low < max_dma)
- zones_size[ZONE_DMA] = low;
- else {
- zones_size[ZONE_DMA] = max_dma;
- zones_size[ZONE_NORMAL] = low - max_dma;
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = highend_pfn - low;
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
+ max_low_pfn,
+ highend_pfn};
+ add_active_range(0, 0, highend_pfn);
+#else
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
+ max_low_pfn};
+ add_active_range(0, 0, max_low_pfn);
#endif
- }
- free_area_init(zones_size);
+
+ free_area_init_nodes(max_zone_pfns);
}
#else
extern unsigned long __init setup_memory(void);
@@ -1518,17 +1405,15 @@
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
- parse_cmdline_early(cmdline_p);
+ parse_early_param();
-#ifdef CONFIG_EARLY_PRINTK
- {
- char *s = strstr(*cmdline_p, "earlyprintk=");
- if (s) {
- setup_early_printk(strchr(s, '=') + 1);
- printk("early console enabled\n");
- }
+ if (user_defined_memmap) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ print_memory_map("user");
}
-#endif
+
+ strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
max_low_pfn = setup_memory();
@@ -1557,7 +1442,7 @@
dmi_scan_machine();
#ifdef CONFIG_X86_GENERICARCH
- generic_apic_probe(*cmdline_p);
+ generic_apic_probe();
#endif
if (efi_enabled)
efi_map_memmap();
@@ -1569,9 +1454,11 @@
acpi_boot_table_init();
#endif
+#ifdef CONFIG_PCI
#ifdef CONFIG_X86_IO_APIC
check_acpi_pci(); /* Checks more than just ACPI actually */
#endif
+#endif
#ifdef CONFIG_ACPI
acpi_boot_init();
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index efe0799..020d873 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -177,6 +177,9 @@
*/
if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
+ if (num_possible_cpus() == 1)
+ goto valid_k7;
+
/* Athlon 660/661 is valid. */
if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1)))
goto valid_k7;
@@ -1376,7 +1379,8 @@
*/
if (cpu == 0)
return -EBUSY;
-
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ stop_apic_nmi_watchdog(NULL);
clear_local_APIC();
/* Allow any queued timer interrupts to get serviced */
local_irq_enable();
@@ -1490,3 +1494,16 @@
/* IPI for generic function call */
set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
}
+
+/*
+ * If the BIOS enumerates physical processors before logical,
+ * maxcpus=N at enumeration-time can be used to disable HT.
+ */
+static int __init parse_maxcpus(char *arg)
+{
+ extern unsigned int maxcpus;
+
+ maxcpus = simple_strtoul(arg, NULL, 0);
+ return 0;
+}
+early_param("maxcpus", parse_maxcpus);
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
index 83db411..3241312 100644
--- a/arch/i386/kernel/srat.c
+++ b/arch/i386/kernel/srat.c
@@ -54,8 +54,6 @@
static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS];
static int num_memory_chunks; /* total number of memory chunks */
-static int zholes_size_init;
-static unsigned long zholes_size[MAX_NUMNODES * MAX_NR_ZONES];
extern void * boot_ioremap(unsigned long, unsigned long);
@@ -135,47 +133,6 @@
"enabled and removable" : "enabled" ) );
}
-/* Take a chunk of pages from page frame cstart to cend and count the number
- * of pages in each zone, returned via zones[].
- */
-static __init void chunk_to_zones(unsigned long cstart, unsigned long cend,
- unsigned long *zones)
-{
- unsigned long max_dma;
- extern unsigned long max_low_pfn;
-
- int z;
- unsigned long rend;
-
- /* FIXME: MAX_DMA_ADDRESS and max_low_pfn are trying to provide
- * similarly scoped information and should be handled in a consistant
- * manner.
- */
- max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
- /* Split the hole into the zones in which it falls. Repeatedly
- * take the segment in which the remaining hole starts, round it
- * to the end of that zone.
- */
- memset(zones, 0, MAX_NR_ZONES * sizeof(long));
- while (cstart < cend) {
- if (cstart < max_dma) {
- z = ZONE_DMA;
- rend = (cend < max_dma)? cend : max_dma;
-
- } else if (cstart < max_low_pfn) {
- z = ZONE_NORMAL;
- rend = (cend < max_low_pfn)? cend : max_low_pfn;
-
- } else {
- z = ZONE_HIGHMEM;
- rend = cend;
- }
- zones[z] += rend - cstart;
- cstart = rend;
- }
-}
-
/*
* The SRAT table always lists ascending addresses, so can always
* assume that the first "start" address that you see is the real
@@ -220,7 +177,6 @@
memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */
memset(node_memory_chunk, 0, sizeof(node_memory_chunk));
- memset(zholes_size, 0, sizeof(zholes_size));
num_memory_chunks = 0;
while (p < end) {
@@ -284,6 +240,7 @@
printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
node_read_chunk(chunk->nid, chunk);
+ add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn);
}
for_each_online_node(nid) {
@@ -392,57 +349,7 @@
return acpi20_parse_srat((struct acpi_table_srat *)header);
}
out_err:
+ remove_all_active_ranges();
printk("failed to get NUMA memory information from SRAT table\n");
return 0;
}
-
-/* For each node run the memory list to determine whether there are
- * any memory holes. For each hole determine which ZONE they fall
- * into.
- *
- * NOTE#1: this requires knowledge of the zone boundries and so
- * _cannot_ be performed before those are calculated in setup_memory.
- *
- * NOTE#2: we rely on the fact that the memory chunks are ordered by
- * start pfn number during setup.
- */
-static void __init get_zholes_init(void)
-{
- int nid;
- int c;
- int first;
- unsigned long end = 0;
-
- for_each_online_node(nid) {
- first = 1;
- for (c = 0; c < num_memory_chunks; c++){
- if (node_memory_chunk[c].nid == nid) {
- if (first) {
- end = node_memory_chunk[c].end_pfn;
- first = 0;
-
- } else {
- /* Record any gap between this chunk
- * and the previous chunk on this node
- * against the zones it spans.
- */
- chunk_to_zones(end,
- node_memory_chunk[c].start_pfn,
- &zholes_size[nid * MAX_NR_ZONES]);
- }
- }
- }
- }
-}
-
-unsigned long * __init get_zholes_size(int nid)
-{
- if (!zholes_size_init) {
- zholes_size_init++;
- get_zholes_init();
- }
- if (nid >= MAX_NUMNODES || !node_online(nid))
- printk("%s: nid = %d is invalid/offline. num_online_nodes = %d",
- __FUNCTION__, nid, num_online_nodes());
- return &zholes_size[nid * MAX_NR_ZONES];
-}
diff --git a/arch/i386/kernel/stacktrace.c b/arch/i386/kernel/stacktrace.c
deleted file mode 100644
index e62a037..0000000
--- a/arch/i386/kernel/stacktrace.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/i386/kernel/stacktrace.c
- *
- * Stack trace management functions
- *
- * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- */
-#include <linux/sched.h>
-#include <linux/stacktrace.h>
-
-static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
-{
- return p > (void *)tinfo &&
- p < (void *)tinfo + THREAD_SIZE - 3;
-}
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer:
- */
-static inline unsigned long
-save_context_stack(struct stack_trace *trace, unsigned int skip,
- struct thread_info *tinfo, unsigned long *stack,
- unsigned long ebp)
-{
- unsigned long addr;
-
-#ifdef CONFIG_FRAME_POINTER
- while (valid_stack_ptr(tinfo, (void *)ebp)) {
- addr = *(unsigned long *)(ebp + 4);
- if (!skip)
- trace->entries[trace->nr_entries++] = addr;
- else
- skip--;
- if (trace->nr_entries >= trace->max_entries)
- break;
- /*
- * break out of recursive entries (such as
- * end_of_stack_stop_unwind_function):
- */
- if (ebp == *(unsigned long *)ebp)
- break;
-
- ebp = *(unsigned long *)ebp;
- }
-#else
- while (valid_stack_ptr(tinfo, stack)) {
- addr = *stack++;
- if (__kernel_text_address(addr)) {
- if (!skip)
- trace->entries[trace->nr_entries++] = addr;
- else
- skip--;
- if (trace->nr_entries >= trace->max_entries)
- break;
- }
- }
-#endif
-
- return ebp;
-}
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer.
- * If all_contexts is set, all contexts (hardirq, softirq and process)
- * are saved. If not set then only the current context is saved.
- */
-void save_stack_trace(struct stack_trace *trace,
- struct task_struct *task, int all_contexts,
- unsigned int skip)
-{
- unsigned long ebp;
- unsigned long *stack = &ebp;
-
- WARN_ON(trace->nr_entries || !trace->max_entries);
-
- if (!task || task == current) {
- /* Grab ebp right from our regs: */
- asm ("movl %%ebp, %0" : "=r" (ebp));
- } else {
- /* ebp is the last reg pushed by switch_to(): */
- ebp = *(unsigned long *) task->thread.esp;
- }
-
- while (1) {
- struct thread_info *context = (struct thread_info *)
- ((unsigned long)stack & (~(THREAD_SIZE - 1)));
-
- ebp = save_context_stack(trace, skip, context, stack, ebp);
- stack = (unsigned long *)context->previous_esp;
- if (!all_contexts || !stack ||
- trace->nr_entries >= trace->max_entries)
- break;
- trace->entries[trace->nr_entries++] = ULONG_MAX;
- if (trace->nr_entries >= trace->max_entries)
- break;
- }
-}
-
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index dd63d47..7e639f7 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -317,3 +317,4 @@
.long sys_tee /* 315 */
.long sys_vmsplice
.long sys_move_pages
+ .long sys_getcpu
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 1302e4a..86944ac 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -130,18 +130,33 @@
int timer_ack;
-#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
unsigned long profile_pc(struct pt_regs *regs)
{
unsigned long pc = instruction_pointer(regs);
- if (!user_mode_vm(regs) && in_lock_functions(pc))
+#ifdef CONFIG_SMP
+ if (!user_mode_vm(regs) && in_lock_functions(pc)) {
+#ifdef CONFIG_FRAME_POINTER
return *(unsigned long *)(regs->ebp + 4);
-
+#else
+ unsigned long *sp;
+ if ((regs->xcs & 3) == 0)
+ sp = (unsigned long *)®s->esp;
+ else
+ sp = (unsigned long *)regs->esp;
+ /* Return address is either directly at stack pointer
+ or above a saved eflags. Eflags has bits 22-31 zero,
+ kernel addresses don't. */
+ if (sp[0] >> 22)
+ return sp[0];
+ if (sp[1] >> 22)
+ return sp[1];
+#endif
+ }
+#endif
return pc;
}
EXPORT_SYMBOL(profile_pc);
-#endif
/*
* This is the same as the above, except we _also_ save the current
diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c
index e2e281d..07d6da3 100644
--- a/arch/i386/kernel/topology.c
+++ b/arch/i386/kernel/topology.c
@@ -28,6 +28,7 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/nodemask.h>
+#include <linux/mmzone.h>
#include <asm/cpu.h>
static struct i386_cpu cpu_devices[NR_CPUS];
@@ -55,34 +56,18 @@
EXPORT_SYMBOL(arch_unregister_cpu);
#endif /*CONFIG_HOTPLUG_CPU*/
-
+static int __init topology_init(void)
+{
+ int i;
#ifdef CONFIG_NUMA
-#include <linux/mmzone.h>
-
-static int __init topology_init(void)
-{
- int i;
-
for_each_online_node(i)
register_one_node(i);
-
- for_each_present_cpu(i)
- arch_register_cpu(i);
- return 0;
-}
-
-#else /* !CONFIG_NUMA */
-
-static int __init topology_init(void)
-{
- int i;
-
- for_each_present_cpu(i)
- arch_register_cpu(i);
- return 0;
-}
-
#endif /* CONFIG_NUMA */
+ for_each_present_cpu(i)
+ arch_register_cpu(i);
+ return 0;
+}
+
subsys_initcall(topology_init);
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 4fcc6690..a13037f 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -28,6 +28,7 @@
#include <linux/kprobes.h>
#include <linux/kexec.h>
#include <linux/unwind.h>
+#include <linux/uaccess.h>
#ifdef CONFIG_EISA
#include <linux/ioport.h>
@@ -40,7 +41,6 @@
#include <asm/processor.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <asm/debugreg.h>
@@ -51,6 +51,7 @@
#include <asm/smp.h>
#include <asm/arch_hooks.h>
#include <asm/kdebug.h>
+#include <asm/stacktrace.h>
#include <linux/module.h>
@@ -118,26 +119,16 @@
p < (void *)tinfo + THREAD_SIZE - 3;
}
-/*
- * Print one address/symbol entries per line.
- */
-static inline void print_addr_and_symbol(unsigned long addr, char *log_lvl)
-{
- printk(" [<%08lx>] ", addr);
-
- print_symbol("%s\n", addr);
-}
-
static inline unsigned long print_context_stack(struct thread_info *tinfo,
unsigned long *stack, unsigned long ebp,
- char *log_lvl)
+ struct stacktrace_ops *ops, void *data)
{
unsigned long addr;
#ifdef CONFIG_FRAME_POINTER
while (valid_stack_ptr(tinfo, (void *)ebp)) {
addr = *(unsigned long *)(ebp + 4);
- print_addr_and_symbol(addr, log_lvl);
+ ops->address(data, addr);
/*
* break out of recursive entries (such as
* end_of_stack_stop_unwind_function):
@@ -150,30 +141,37 @@
while (valid_stack_ptr(tinfo, stack)) {
addr = *stack++;
if (__kernel_text_address(addr))
- print_addr_and_symbol(addr, log_lvl);
+ ops->address(data, addr);
}
#endif
return ebp;
}
+struct ops_and_data {
+ struct stacktrace_ops *ops;
+ void *data;
+};
+
static asmlinkage int
-show_trace_unwind(struct unwind_frame_info *info, void *log_lvl)
+dump_trace_unwind(struct unwind_frame_info *info, void *data)
{
+ struct ops_and_data *oad = (struct ops_and_data *)data;
int n = 0;
while (unwind(info) == 0 && UNW_PC(info)) {
n++;
- print_addr_and_symbol(UNW_PC(info), log_lvl);
+ oad->ops->address(oad->data, UNW_PC(info));
if (arch_unw_user_mode(info))
break;
}
return n;
}
-static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
- unsigned long *stack, char *log_lvl)
+void dump_trace(struct task_struct *task, struct pt_regs *regs,
+ unsigned long *stack,
+ struct stacktrace_ops *ops, void *data)
{
- unsigned long ebp;
+ unsigned long ebp = 0;
if (!task)
task = current;
@@ -181,54 +179,116 @@
if (call_trace >= 0) {
int unw_ret = 0;
struct unwind_frame_info info;
+ struct ops_and_data oad = { .ops = ops, .data = data };
if (regs) {
if (unwind_init_frame_info(&info, task, regs) == 0)
- unw_ret = show_trace_unwind(&info, log_lvl);
+ unw_ret = dump_trace_unwind(&info, &oad);
} else if (task == current)
- unw_ret = unwind_init_running(&info, show_trace_unwind, log_lvl);
+ unw_ret = unwind_init_running(&info, dump_trace_unwind, &oad);
else {
if (unwind_init_blocked(&info, task) == 0)
- unw_ret = show_trace_unwind(&info, log_lvl);
+ unw_ret = dump_trace_unwind(&info, &oad);
}
if (unw_ret > 0) {
if (call_trace == 1 && !arch_unw_user_mode(&info)) {
- print_symbol("DWARF2 unwinder stuck at %s\n",
+ ops->warning_symbol(data, "DWARF2 unwinder stuck at %s\n",
UNW_PC(&info));
if (UNW_SP(&info) >= PAGE_OFFSET) {
- printk("Leftover inexact backtrace:\n");
+ ops->warning(data, "Leftover inexact backtrace:\n");
stack = (void *)UNW_SP(&info);
+ if (!stack)
+ return;
+ ebp = UNW_FP(&info);
} else
- printk("Full inexact backtrace again:\n");
+ ops->warning(data, "Full inexact backtrace again:\n");
} else if (call_trace >= 1)
return;
else
- printk("Full inexact backtrace again:\n");
+ ops->warning(data, "Full inexact backtrace again:\n");
} else
- printk("Inexact backtrace:\n");
+ ops->warning(data, "Inexact backtrace:\n");
+ }
+ if (!stack) {
+ unsigned long dummy;
+ stack = &dummy;
+ if (task && task != current)
+ stack = (unsigned long *)task->thread.esp;
}
- if (task == current) {
- /* Grab ebp right from our regs */
- asm ("movl %%ebp, %0" : "=r" (ebp) : );
- } else {
- /* ebp is the last reg pushed by switch_to */
- ebp = *(unsigned long *) task->thread.esp;
+#ifdef CONFIG_FRAME_POINTER
+ if (!ebp) {
+ if (task == current) {
+ /* Grab ebp right from our regs */
+ asm ("movl %%ebp, %0" : "=r" (ebp) : );
+ } else {
+ /* ebp is the last reg pushed by switch_to */
+ ebp = *(unsigned long *) task->thread.esp;
+ }
}
+#endif
while (1) {
struct thread_info *context;
context = (struct thread_info *)
((unsigned long)stack & (~(THREAD_SIZE - 1)));
- ebp = print_context_stack(context, stack, ebp, log_lvl);
+ ebp = print_context_stack(context, stack, ebp, ops, data);
+ /* Should be after the line below, but somewhere
+ in early boot context comes out corrupted and we
+ can't reference it -AK */
+ if (ops->stack(data, "IRQ") < 0)
+ break;
stack = (unsigned long*)context->previous_esp;
if (!stack)
break;
- printk("%s =======================\n", log_lvl);
}
}
+EXPORT_SYMBOL(dump_trace);
-void show_trace(struct task_struct *task, struct pt_regs *regs, unsigned long * stack)
+static void
+print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+ printk(data);
+ print_symbol(msg, symbol);
+ printk("\n");
+}
+
+static void print_trace_warning(void *data, char *msg)
+{
+ printk("%s%s\n", (char *)data, msg);
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+ return 0;
+}
+
+/*
+ * Print one address/symbol entries per line.
+ */
+static void print_trace_address(void *data, unsigned long addr)
+{
+ printk("%s [<%08lx>] ", (char *)data, addr);
+ print_symbol("%s\n", addr);
+}
+
+static struct stacktrace_ops print_trace_ops = {
+ .warning = print_trace_warning,
+ .warning_symbol = print_trace_warning_symbol,
+ .stack = print_trace_stack,
+ .address = print_trace_address,
+};
+
+static void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+ unsigned long * stack, char *log_lvl)
+{
+ dump_trace(task, regs, stack, &print_trace_ops, log_lvl);
+ printk("%s =======================\n", log_lvl);
+}
+
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+ unsigned long * stack)
{
show_trace_log_lvl(task, regs, stack, "");
}
@@ -291,8 +351,9 @@
ss = regs->xss & 0xffff;
}
print_modules();
- printk(KERN_EMERG "CPU: %d\nEIP: %04x:[<%08lx>] %s VLI\n"
- "EFLAGS: %08lx (%s %.*s) \n",
+ printk(KERN_EMERG "CPU: %d\n"
+ KERN_EMERG "EIP: %04x:[<%08lx>] %s VLI\n"
+ KERN_EMERG "EFLAGS: %08lx (%s %.*s)\n",
smp_processor_id(), 0xffff & regs->xcs, regs->eip,
print_tainted(), regs->eflags, system_utsname.release,
(int)strcspn(system_utsname.version, " "),
@@ -348,7 +409,7 @@
if (eip < PAGE_OFFSET)
return;
- if (__get_user(ud2, (unsigned short __user *)eip))
+ if (probe_kernel_address((unsigned short __user *)eip, ud2))
return;
if (ud2 != 0x0b0f)
return;
@@ -361,7 +422,8 @@
char *file;
char c;
- if (__get_user(line, (unsigned short __user *)(eip + 2)))
+ if (probe_kernel_address((unsigned short __user *)(eip + 2),
+ line))
break;
if (__get_user(file, (char * __user *)(eip + 4)) ||
(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
@@ -634,18 +696,24 @@
}
}
-static void mem_parity_error(unsigned char reason, struct pt_regs * regs)
+static __kprobes void
+mem_parity_error(unsigned char reason, struct pt_regs * regs)
{
- printk(KERN_EMERG "Uhhuh. NMI received. Dazed and confused, but trying "
- "to continue\n");
+ printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on "
+ "CPU %d.\n", reason, smp_processor_id());
printk(KERN_EMERG "You probably have a hardware problem with your RAM "
"chips\n");
+ if (panic_on_unrecovered_nmi)
+ panic("NMI: Not continuing");
+
+ printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
/* Clear and disable the memory parity error line. */
clear_mem_error(reason);
}
-static void io_check_error(unsigned char reason, struct pt_regs * regs)
+static __kprobes void
+io_check_error(unsigned char reason, struct pt_regs * regs)
{
unsigned long i;
@@ -661,7 +729,8 @@
outb(reason, 0x61);
}
-static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+static __kprobes void
+unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
{
#ifdef CONFIG_MCA
/* Might actually be able to figure out what the guilty party
@@ -671,15 +740,18 @@
return;
}
#endif
- printk("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
- reason, smp_processor_id());
- printk("Dazed and confused, but trying to continue\n");
- printk("Do you have a strange power saving mode enabled?\n");
+ printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on "
+ "CPU %d.\n", reason, smp_processor_id());
+ printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
+ if (panic_on_unrecovered_nmi)
+ panic("NMI: Not continuing");
+
+ printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
}
static DEFINE_SPINLOCK(nmi_print_lock);
-void die_nmi (struct pt_regs *regs, const char *msg)
+void __kprobes die_nmi(struct pt_regs *regs, const char *msg)
{
if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) ==
NOTIFY_STOP)
@@ -711,7 +783,7 @@
do_exit(SIGSEGV);
}
-static void default_do_nmi(struct pt_regs * regs)
+static __kprobes void default_do_nmi(struct pt_regs * regs)
{
unsigned char reason = 0;
@@ -728,12 +800,12 @@
* Ok, so this is none of the documented NMI sources,
* so it must be the NMI watchdog.
*/
- if (nmi_watchdog) {
- nmi_watchdog_tick(regs);
+ if (nmi_watchdog_tick(regs, reason))
return;
- }
+ if (!do_nmi_callback(regs, smp_processor_id()))
#endif
- unknown_nmi_error(reason, regs);
+ unknown_nmi_error(reason, regs);
+
return;
}
if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
@@ -749,14 +821,7 @@
reassert_nmi();
}
-static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
-{
- return 0;
-}
-
-static nmi_callback_t nmi_callback = dummy_nmi_callback;
-
-fastcall void do_nmi(struct pt_regs * regs, long error_code)
+fastcall __kprobes void do_nmi(struct pt_regs * regs, long error_code)
{
int cpu;
@@ -766,25 +831,11 @@
++nmi_count(cpu);
- if (!rcu_dereference(nmi_callback)(regs, cpu))
- default_do_nmi(regs);
+ default_do_nmi(regs);
nmi_exit();
}
-void set_nmi_callback(nmi_callback_t callback)
-{
- vmalloc_sync_all();
- rcu_assign_pointer(nmi_callback, callback);
-}
-EXPORT_SYMBOL_GPL(set_nmi_callback);
-
-void unset_nmi_callback(void)
-{
- nmi_callback = dummy_nmi_callback;
-}
-EXPORT_SYMBOL_GPL(unset_nmi_callback);
-
#ifdef CONFIG_KPROBES
fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code)
{
@@ -1124,20 +1175,6 @@
}
#endif
-#define _set_gate(gate_addr,type,dpl,addr,seg) \
-do { \
- int __d0, __d1; \
- __asm__ __volatile__ ("movw %%dx,%%ax\n\t" \
- "movw %4,%%dx\n\t" \
- "movl %%eax,%0\n\t" \
- "movl %%edx,%1" \
- :"=m" (*((long *) (gate_addr))), \
- "=m" (*(1+(long *) (gate_addr))), "=&a" (__d0), "=&d" (__d1) \
- :"i" ((short) (0x8000+(dpl<<13)+(type<<8))), \
- "3" ((char *) (addr)),"2" ((seg) << 16)); \
-} while (0)
-
-
/*
* This needs to use 'idt_table' rather than 'idt', and
* thus use the _nonmapped_ version of the IDT, as the
@@ -1146,7 +1183,7 @@
*/
void set_intr_gate(unsigned int n, void *addr)
{
- _set_gate(idt_table+n,14,0,addr,__KERNEL_CS);
+ _set_gate(n, DESCTYPE_INT, addr, __KERNEL_CS);
}
/*
@@ -1154,22 +1191,22 @@
*/
static inline void set_system_intr_gate(unsigned int n, void *addr)
{
- _set_gate(idt_table+n, 14, 3, addr, __KERNEL_CS);
+ _set_gate(n, DESCTYPE_INT | DESCTYPE_DPL3, addr, __KERNEL_CS);
}
static void __init set_trap_gate(unsigned int n, void *addr)
{
- _set_gate(idt_table+n,15,0,addr,__KERNEL_CS);
+ _set_gate(n, DESCTYPE_TRAP, addr, __KERNEL_CS);
}
static void __init set_system_gate(unsigned int n, void *addr)
{
- _set_gate(idt_table+n,15,3,addr,__KERNEL_CS);
+ _set_gate(n, DESCTYPE_TRAP | DESCTYPE_DPL3, addr, __KERNEL_CS);
}
static void __init set_task_gate(unsigned int n, unsigned int gdt_entry)
{
- _set_gate(idt_table+n,5,0,0,(gdt_entry<<3));
+ _set_gate(n, DESCTYPE_TASK, (void *)0, (gdt_entry<<3));
}
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index 7e0d8da..b8fa0a8 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -192,7 +192,7 @@
EXPORT_SYMBOL(recalibrate_cpu_khz);
-void tsc_init(void)
+void __init tsc_init(void)
{
if (!cpu_has_tsc || tsc_disable)
return;
diff --git a/arch/i386/lib/Makefile b/arch/i386/lib/Makefile
index 914933e..d86a548 100644
--- a/arch/i386/lib/Makefile
+++ b/arch/i386/lib/Makefile
@@ -4,6 +4,6 @@
lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \
- bitops.o
+ bitops.o semaphore.o
lib-$(CONFIG_X86_USE_3DNOW) += mmx.o
diff --git a/arch/i386/lib/semaphore.S b/arch/i386/lib/semaphore.S
new file mode 100644
index 0000000..01f80b5
--- /dev/null
+++ b/arch/i386/lib/semaphore.S
@@ -0,0 +1,217 @@
+/*
+ * i386 semaphore implementation.
+ *
+ * (C) Copyright 1999 Linus Torvalds
+ *
+ * Portions Copyright 1999 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/rwlock.h>
+#include <asm/alternative-asm.i>
+#include <asm/frame.i>
+#include <asm/dwarf2.h>
+
+/*
+ * The semaphore operations have a special calling sequence that
+ * allow us to do a simpler in-line version of them. These routines
+ * need to convert that sequence back into the C sequence when
+ * there is contention on the semaphore.
+ *
+ * %eax contains the semaphore pointer on entry. Save the C-clobbered
+ * registers (%eax, %edx and %ecx) except %eax whish is either a return
+ * value or just clobbered..
+ */
+ .section .sched.text
+ENTRY(__down_failed)
+ CFI_STARTPROC
+ FRAME
+ pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx,0
+ pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ call __down
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ecx
+ popl %edx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE edx
+ ENDFRAME
+ ret
+ CFI_ENDPROC
+ END(__down_failed)
+
+ENTRY(__down_failed_interruptible)
+ CFI_STARTPROC
+ FRAME
+ pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx,0
+ pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ call __down_interruptible
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ecx
+ popl %edx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE edx
+ ENDFRAME
+ ret
+ CFI_ENDPROC
+ END(__down_failed_interruptible)
+
+ENTRY(__down_failed_trylock)
+ CFI_STARTPROC
+ FRAME
+ pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx,0
+ pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ call __down_trylock
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ecx
+ popl %edx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE edx
+ ENDFRAME
+ ret
+ CFI_ENDPROC
+ END(__down_failed_trylock)
+
+ENTRY(__up_wakeup)
+ CFI_STARTPROC
+ FRAME
+ pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx,0
+ pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ call __up
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ecx
+ popl %edx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE edx
+ ENDFRAME
+ ret
+ CFI_ENDPROC
+ END(__up_wakeup)
+
+/*
+ * rw spinlock fallbacks
+ */
+#ifdef CONFIG_SMP
+ENTRY(__write_lock_failed)
+ CFI_STARTPROC simple
+ FRAME
+2: LOCK_PREFIX
+ addl $ RW_LOCK_BIAS,(%eax)
+1: rep; nop
+ cmpl $ RW_LOCK_BIAS,(%eax)
+ jne 1b
+ LOCK_PREFIX
+ subl $ RW_LOCK_BIAS,(%eax)
+ jnz 2b
+ ENDFRAME
+ ret
+ CFI_ENDPROC
+ END(__write_lock_failed)
+
+ENTRY(__read_lock_failed)
+ CFI_STARTPROC
+ FRAME
+2: LOCK_PREFIX
+ incl (%eax)
+1: rep; nop
+ cmpl $1,(%eax)
+ js 1b
+ LOCK_PREFIX
+ decl (%eax)
+ js 2b
+ ENDFRAME
+ ret
+ CFI_ENDPROC
+ END(__read_lock_failed)
+
+#endif
+
+/* Fix up special calling conventions */
+ENTRY(call_rwsem_down_read_failed)
+ CFI_STARTPROC
+ push %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ push %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx,0
+ call rwsem_down_read_failed
+ pop %edx
+ CFI_ADJUST_CFA_OFFSET -4
+ pop %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ ret
+ CFI_ENDPROC
+ END(call_rwsem_down_read_failed)
+
+ENTRY(call_rwsem_down_write_failed)
+ CFI_STARTPROC
+ push %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ calll rwsem_down_write_failed
+ pop %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ ret
+ CFI_ENDPROC
+ END(call_rwsem_down_write_failed)
+
+ENTRY(call_rwsem_wake)
+ CFI_STARTPROC
+ decw %dx /* do nothing if still outstanding active readers */
+ jnz 1f
+ push %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ call rwsem_wake
+ pop %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+1: ret
+ CFI_ENDPROC
+ END(call_rwsem_wake)
+
+/* Fix up special calling conventions */
+ENTRY(call_rwsem_downgrade_wake)
+ CFI_STARTPROC
+ push %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx,0
+ push %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx,0
+ call rwsem_downgrade_wake
+ pop %edx
+ CFI_ADJUST_CFA_OFFSET -4
+ pop %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ ret
+ CFI_ENDPROC
+ END(call_rwsem_downgrade_wake)
+
diff --git a/arch/i386/mach-generic/bigsmp.c b/arch/i386/mach-generic/bigsmp.c
index ef7a6e6..33d9f93 100644
--- a/arch/i386/mach-generic/bigsmp.c
+++ b/arch/i386/mach-generic/bigsmp.c
@@ -5,6 +5,7 @@
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
+#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
diff --git a/arch/i386/mach-generic/es7000.c b/arch/i386/mach-generic/es7000.c
index 845cdd0..aa144d8 100644
--- a/arch/i386/mach-generic/es7000.c
+++ b/arch/i386/mach-generic/es7000.c
@@ -4,6 +4,7 @@
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
+#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c
index bcd1bcf..94b1fd9 100644
--- a/arch/i386/mach-generic/probe.c
+++ b/arch/i386/mach-generic/probe.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
+#include <linux/errno.h>
#include <asm/fixmap.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
@@ -29,7 +30,24 @@
NULL,
};
-static int cmdline_apic;
+static int cmdline_apic __initdata;
+static int __init parse_apic(char *arg)
+{
+ int i;
+
+ if (!arg)
+ return -EINVAL;
+
+ for (i = 0; apic_probe[i]; i++) {
+ if (!strcmp(apic_probe[i]->name, arg)) {
+ genapic = apic_probe[i];
+ cmdline_apic = 1;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+early_param("apic", parse_apic);
void __init generic_bigsmp_probe(void)
{
@@ -48,40 +66,20 @@
}
}
-void __init generic_apic_probe(char *command_line)
+void __init generic_apic_probe(void)
{
- char *s;
- int i;
- int changed = 0;
-
- s = strstr(command_line, "apic=");
- if (s && (s == command_line || isspace(s[-1]))) {
- char *p = strchr(s, ' '), old;
- if (!p)
- p = strchr(s, '\0');
- old = *p;
- *p = 0;
- for (i = 0; !changed && apic_probe[i]; i++) {
- if (!strcmp(apic_probe[i]->name, s+5)) {
- changed = 1;
+ if (!cmdline_apic) {
+ int i;
+ for (i = 0; apic_probe[i]; i++) {
+ if (apic_probe[i]->probe()) {
genapic = apic_probe[i];
+ break;
}
}
- if (!changed)
- printk(KERN_ERR "Unknown genapic `%s' specified.\n", s);
- *p = old;
- cmdline_apic = changed;
- }
- for (i = 0; !changed && apic_probe[i]; i++) {
- if (apic_probe[i]->probe()) {
- changed = 1;
- genapic = apic_probe[i];
- }
+ /* Not visible without early console */
+ if (!apic_probe[i])
+ panic("Didn't find an APIC driver");
}
- /* Not visible without early console */
- if (!changed)
- panic("Didn't find an APIC driver");
-
printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
}
@@ -119,7 +117,9 @@
return 0;
}
+#ifdef CONFIG_SMP
int hard_smp_processor_id(void)
{
return genapic->get_apic_id(*(unsigned long *)(APIC_BASE+APIC_ID));
}
+#endif
diff --git a/arch/i386/mach-generic/summit.c b/arch/i386/mach-generic/summit.c
index b73501d..f7e5d66 100644
--- a/arch/i386/mach-generic/summit.c
+++ b/arch/i386/mach-generic/summit.c
@@ -4,6 +4,7 @@
#define APIC_DEFINITION 1
#include <linux/threads.h>
#include <linux/cpumask.h>
+#include <asm/smp.h>
#include <asm/mpspec.h>
#include <asm/genapic.h>
#include <asm/fixmap.h>
diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c
index fb5d8b7..51e3739 100644
--- a/arch/i386/mm/discontig.c
+++ b/arch/i386/mm/discontig.c
@@ -157,21 +157,6 @@
BUG();
}
-/* Find the owning node for a pfn. */
-int early_pfn_to_nid(unsigned long pfn)
-{
- int nid;
-
- for_each_node(nid) {
- if (node_end_pfn[nid] == 0)
- break;
- if (node_start_pfn[nid] <= pfn && node_end_pfn[nid] >= pfn)
- return nid;
- }
-
- return 0;
-}
-
/*
* Allocate memory for the pg_data_t for this node via a crude pre-bootmem
* method. For node zero take this from the bottom of memory, for
@@ -227,6 +212,8 @@
unsigned long pfn;
for_each_online_node(nid) {
+ unsigned old_end_pfn = node_end_pfn[nid];
+
/*
* The acpi/srat node info can show hot-add memroy zones
* where memory could be added but not currently present.
@@ -276,6 +263,7 @@
node_end_pfn[nid] -= size;
node_remap_start_pfn[nid] = node_end_pfn[nid];
+ shrink_active_range(nid, old_end_pfn, node_end_pfn[nid]);
}
printk("Reserving total of %ld pages for numa KVA remap\n",
reserve_pages);
@@ -322,6 +310,11 @@
highstart_pfn = system_max_low_pfn;
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
+ num_physpages = highend_pfn;
+ high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+ num_physpages = system_max_low_pfn;
+ high_memory = (void *) __va(system_max_low_pfn * PAGE_SIZE - 1) + 1;
#endif
printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
pages_to_mb(system_max_low_pfn));
@@ -364,45 +357,22 @@
void __init zone_sizes_init(void)
{
int nid;
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
+ max_low_pfn,
+ highend_pfn
+ };
-
- for_each_online_node(nid) {
- unsigned long zones_size[MAX_NR_ZONES] = {0, };
- unsigned long *zholes_size;
- unsigned int max_dma;
-
- unsigned long low = max_low_pfn;
- unsigned long start = node_start_pfn[nid];
- unsigned long high = node_end_pfn[nid];
-
- max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
- if (node_has_online_mem(nid)){
- if (start > low) {
-#ifdef CONFIG_HIGHMEM
- BUG_ON(start > high);
- zones_size[ZONE_HIGHMEM] = high - start;
-#endif
- } else {
- if (low < max_dma)
- zones_size[ZONE_DMA] = low;
- else {
- BUG_ON(max_dma > low);
- BUG_ON(low > high);
- zones_size[ZONE_DMA] = max_dma;
- zones_size[ZONE_NORMAL] = low - max_dma;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = high - low;
-#endif
- }
- }
+ /* If SRAT has not registered memory, register it now */
+ if (find_max_pfn_with_active_regions() == 0) {
+ for_each_online_node(nid) {
+ if (node_has_online_mem(nid))
+ add_active_range(nid, node_start_pfn[nid],
+ node_end_pfn[nid]);
}
-
- zholes_size = get_zholes_size(nid);
-
- free_area_init_node(nid, NODE_DATA(nid), zones_size, start,
- zholes_size);
}
+
+ free_area_init_nodes(max_zone_pfns);
return;
}
diff --git a/arch/i386/mm/extable.c b/arch/i386/mm/extable.c
index de03c54..0ce4f22 100644
--- a/arch/i386/mm/extable.c
+++ b/arch/i386/mm/extable.c
@@ -11,7 +11,7 @@
const struct exception_table_entry *fixup;
#ifdef CONFIG_PNPBIOS
- if (unlikely((regs->xcs & ~15) == (GDT_ENTRY_PNPBIOS_BASE << 3)))
+ if (unlikely(SEGMENT_IS_PNP_CODE(regs->xcs)))
{
extern u32 pnp_bios_fault_eip, pnp_bios_fault_esp;
extern u32 pnp_bios_is_utter_crap;
diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c
index f727946..5e17a3f 100644
--- a/arch/i386/mm/fault.c
+++ b/arch/i386/mm/fault.c
@@ -27,21 +27,24 @@
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/kdebug.h>
+#include <asm/segment.h>
extern void die(const char *,struct pt_regs *,long);
-#ifdef CONFIG_KPROBES
-ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
+static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
+
int register_page_fault_notifier(struct notifier_block *nb)
{
vmalloc_sync_all();
return atomic_notifier_chain_register(¬ify_page_fault_chain, nb);
}
+EXPORT_SYMBOL_GPL(register_page_fault_notifier);
int unregister_page_fault_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb);
}
+EXPORT_SYMBOL_GPL(unregister_page_fault_notifier);
static inline int notify_page_fault(enum die_val val, const char *str,
struct pt_regs *regs, long err, int trap, int sig)
@@ -55,14 +58,6 @@
};
return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args);
}
-#else
-static inline int notify_page_fault(enum die_val val, const char *str,
- struct pt_regs *regs, long err, int trap, int sig)
-{
- return NOTIFY_DONE;
-}
-#endif
-
/*
* Unlock any spinlocks which will prevent us from getting the
@@ -119,10 +114,10 @@
}
/* The standard kernel/user address space limit. */
- *eip_limit = (seg & 3) ? USER_DS.seg : KERNEL_DS.seg;
+ *eip_limit = user_mode(regs) ? USER_DS.seg : KERNEL_DS.seg;
/* By far the most common cases. */
- if (likely(seg == __USER_CS || seg == __KERNEL_CS))
+ if (likely(SEGMENT_IS_FLAT_CODE(seg)))
return eip;
/* Check the segment exists, is within the current LDT/GDT size,
@@ -436,11 +431,7 @@
write = 0;
switch (error_code & 3) {
default: /* 3: write, present */
-#ifdef TEST_VERIFY_AREA
- if (regs->cs == KERNEL_CS)
- printk("WP fault at %08lx\n", regs->eip);
-#endif
- /* fall through */
+ /* fall through */
case 2: /* write, not present */
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c
index b6eb4dc..ba44000 100644
--- a/arch/i386/mm/highmem.c
+++ b/arch/i386/mm/highmem.c
@@ -54,7 +54,7 @@
unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
- if (vaddr < FIXADDR_START) { // FIXME
+ if (vaddr >= PAGE_OFFSET && vaddr < (unsigned long)high_memory) {
dec_preempt_count();
preempt_check_resched();
return;
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index efd0bcd..4a5a914 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -435,16 +435,22 @@
* on Enable
* off Disable
*/
-void __init noexec_setup(const char *str)
+static int __init noexec_setup(char *str)
{
- if (!strncmp(str, "on",2) && cpu_has_nx) {
- __supported_pte_mask |= _PAGE_NX;
- disable_nx = 0;
- } else if (!strncmp(str,"off",3)) {
+ if (!str || !strcmp(str, "on")) {
+ if (cpu_has_nx) {
+ __supported_pte_mask |= _PAGE_NX;
+ disable_nx = 0;
+ }
+ } else if (!strcmp(str,"off")) {
disable_nx = 1;
__supported_pte_mask &= ~_PAGE_NX;
- }
+ } else
+ return -EINVAL;
+
+ return 0;
}
+early_param("noexec", noexec_setup);
int nx_enabled = 0;
#ifdef CONFIG_X86_PAE
@@ -552,18 +558,6 @@
}
}
-static void __init set_max_mapnr_init(void)
-{
-#ifdef CONFIG_HIGHMEM
- num_physpages = highend_pfn;
-#else
- num_physpages = max_low_pfn;
-#endif
-#ifdef CONFIG_FLATMEM
- max_mapnr = num_physpages;
-#endif
-}
-
static struct kcore_list kcore_mem, kcore_vmalloc;
void __init mem_init(void)
@@ -590,14 +584,6 @@
}
#endif
- set_max_mapnr_init();
-
-#ifdef CONFIG_HIGHMEM
- high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
-#else
- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
-#endif
-
/* this will put all low memory onto the freelists */
totalram_pages += free_all_bootmem();
diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c
index 5f8dc8a..3700eef 100644
--- a/arch/i386/oprofile/nmi_int.c
+++ b/arch/i386/oprofile/nmi_int.c
@@ -17,14 +17,15 @@
#include <asm/nmi.h>
#include <asm/msr.h>
#include <asm/apic.h>
+#include <asm/kdebug.h>
#include "op_counter.h"
#include "op_x86_model.h"
-
+
static struct op_x86_model_spec const * model;
static struct op_msrs cpu_msrs[NR_CPUS];
static unsigned long saved_lvtpc[NR_CPUS];
-
+
static int nmi_start(void);
static void nmi_stop(void);
@@ -82,13 +83,24 @@
#define exit_driverfs() do { } while (0)
#endif /* CONFIG_PM */
-
-static int nmi_callback(struct pt_regs * regs, int cpu)
+static int profile_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
{
- return model->check_ctrs(regs, &cpu_msrs[cpu]);
+ struct die_args *args = (struct die_args *)data;
+ int ret = NOTIFY_DONE;
+ int cpu = smp_processor_id();
+
+ switch(val) {
+ case DIE_NMI:
+ if (model->check_ctrs(args->regs, &cpu_msrs[cpu]))
+ ret = NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return ret;
}
-
-
+
static void nmi_cpu_save_registers(struct op_msrs * msrs)
{
unsigned int const nr_ctrs = model->num_counters;
@@ -98,15 +110,19 @@
unsigned int i;
for (i = 0; i < nr_ctrs; ++i) {
- rdmsr(counters[i].addr,
- counters[i].saved.low,
- counters[i].saved.high);
+ if (counters[i].addr){
+ rdmsr(counters[i].addr,
+ counters[i].saved.low,
+ counters[i].saved.high);
+ }
}
for (i = 0; i < nr_ctrls; ++i) {
- rdmsr(controls[i].addr,
- controls[i].saved.low,
- controls[i].saved.high);
+ if (controls[i].addr){
+ rdmsr(controls[i].addr,
+ controls[i].saved.low,
+ controls[i].saved.high);
+ }
}
}
@@ -170,27 +186,29 @@
apic_write(APIC_LVTPC, APIC_DM_NMI);
}
+static struct notifier_block profile_exceptions_nb = {
+ .notifier_call = profile_exceptions_notify,
+ .next = NULL,
+ .priority = 0
+};
static int nmi_setup(void)
{
+ int err=0;
+
if (!allocate_msrs())
return -ENOMEM;
- /* We walk a thin line between law and rape here.
- * We need to be careful to install our NMI handler
- * without actually triggering any NMIs as this will
- * break the core code horrifically.
- */
- if (reserve_lapic_nmi() < 0) {
+ if ((err = register_die_notifier(&profile_exceptions_nb))){
free_msrs();
- return -EBUSY;
+ return err;
}
+
/* We need to serialize save and setup for HT because the subset
* of msrs are distinct for save and setup operations
*/
on_each_cpu(nmi_save_registers, NULL, 0, 1);
on_each_cpu(nmi_cpu_setup, NULL, 0, 1);
- set_nmi_callback(nmi_callback);
nmi_enabled = 1;
return 0;
}
@@ -205,15 +223,19 @@
unsigned int i;
for (i = 0; i < nr_ctrls; ++i) {
- wrmsr(controls[i].addr,
- controls[i].saved.low,
- controls[i].saved.high);
+ if (controls[i].addr){
+ wrmsr(controls[i].addr,
+ controls[i].saved.low,
+ controls[i].saved.high);
+ }
}
for (i = 0; i < nr_ctrs; ++i) {
- wrmsr(counters[i].addr,
- counters[i].saved.low,
- counters[i].saved.high);
+ if (counters[i].addr){
+ wrmsr(counters[i].addr,
+ counters[i].saved.low,
+ counters[i].saved.high);
+ }
}
}
@@ -234,6 +256,7 @@
apic_write(APIC_LVTPC, saved_lvtpc[cpu]);
apic_write(APIC_LVTERR, v);
nmi_restore_registers(msrs);
+ model->shutdown(msrs);
}
@@ -241,8 +264,7 @@
{
nmi_enabled = 0;
on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1);
- unset_nmi_callback();
- release_lapic_nmi();
+ unregister_die_notifier(&profile_exceptions_nb);
free_msrs();
}
@@ -284,6 +306,14 @@
struct dentry * dir;
char buf[4];
+ /* quick little hack to _not_ expose a counter if it is not
+ * available for use. This should protect userspace app.
+ * NOTE: assumes 1:1 mapping here (that counters are organized
+ * sequentially in their struct assignment).
+ */
+ if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i)))
+ continue;
+
snprintf(buf, sizeof(buf), "%d", i);
dir = oprofilefs_mkdir(sb, root, buf);
oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
diff --git a/arch/i386/oprofile/nmi_timer_int.c b/arch/i386/oprofile/nmi_timer_int.c
index 930a112..abf0ba5 100644
--- a/arch/i386/oprofile/nmi_timer_int.c
+++ b/arch/i386/oprofile/nmi_timer_int.c
@@ -17,34 +17,49 @@
#include <asm/nmi.h>
#include <asm/apic.h>
#include <asm/ptrace.h>
+#include <asm/kdebug.h>
-static int nmi_timer_callback(struct pt_regs * regs, int cpu)
+static int profile_timer_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
{
- oprofile_add_sample(regs, 0);
- return 1;
+ struct die_args *args = (struct die_args *)data;
+ int ret = NOTIFY_DONE;
+
+ switch(val) {
+ case DIE_NMI:
+ oprofile_add_sample(args->regs, 0);
+ ret = NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return ret;
}
+static struct notifier_block profile_timer_exceptions_nb = {
+ .notifier_call = profile_timer_exceptions_notify,
+ .next = NULL,
+ .priority = 0
+};
+
static int timer_start(void)
{
- disable_timer_nmi_watchdog();
- set_nmi_callback(nmi_timer_callback);
+ if (register_die_notifier(&profile_timer_exceptions_nb))
+ return 1;
return 0;
}
static void timer_stop(void)
{
- enable_timer_nmi_watchdog();
- unset_nmi_callback();
+ unregister_die_notifier(&profile_timer_exceptions_nb);
synchronize_sched(); /* Allow already-started NMIs to complete. */
}
int __init op_nmi_timer_init(struct oprofile_operations * ops)
{
- extern int nmi_active;
-
- if (nmi_active <= 0)
+ if ((nmi_watchdog != NMI_IO_APIC) || (atomic_read(&nmi_active) <= 0))
return -ENODEV;
ops->start = timer_start;
diff --git a/arch/i386/oprofile/op_model_athlon.c b/arch/i386/oprofile/op_model_athlon.c
index 693bdea..3057a19 100644
--- a/arch/i386/oprofile/op_model_athlon.c
+++ b/arch/i386/oprofile/op_model_athlon.c
@@ -21,10 +21,12 @@
#define NUM_COUNTERS 4
#define NUM_CONTROLS 4
+#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1);} while (0)
#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
#define CTRL_READ(l,h,msrs,c) do {rdmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
@@ -40,15 +42,21 @@
static void athlon_fill_in_addresses(struct op_msrs * const msrs)
{
- msrs->counters[0].addr = MSR_K7_PERFCTR0;
- msrs->counters[1].addr = MSR_K7_PERFCTR1;
- msrs->counters[2].addr = MSR_K7_PERFCTR2;
- msrs->counters[3].addr = MSR_K7_PERFCTR3;
+ int i;
- msrs->controls[0].addr = MSR_K7_EVNTSEL0;
- msrs->controls[1].addr = MSR_K7_EVNTSEL1;
- msrs->controls[2].addr = MSR_K7_EVNTSEL2;
- msrs->controls[3].addr = MSR_K7_EVNTSEL3;
+ for (i=0; i < NUM_COUNTERS; i++) {
+ if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+ msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
+ else
+ msrs->counters[i].addr = 0;
+ }
+
+ for (i=0; i < NUM_CONTROLS; i++) {
+ if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
+ msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
+ else
+ msrs->controls[i].addr = 0;
+ }
}
@@ -59,19 +67,23 @@
/* clear all counters */
for (i = 0 ; i < NUM_CONTROLS; ++i) {
+ if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ continue;
CTRL_READ(low, high, msrs, i);
CTRL_CLEAR(low);
CTRL_WRITE(low, high, msrs, i);
}
-
+
/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (unlikely(!CTR_IS_RESERVED(msrs,i)))
+ continue;
CTR_WRITE(1, msrs, i);
}
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if (counter_config[i].enabled) {
+ if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) {
reset_value[i] = counter_config[i].count;
CTR_WRITE(counter_config[i].count, msrs, i);
@@ -98,6 +110,8 @@
int i;
for (i = 0 ; i < NUM_COUNTERS; ++i) {
+ if (!reset_value[i])
+ continue;
CTR_READ(low, high, msrs, i);
if (CTR_OVERFLOWED(low)) {
oprofile_add_sample(regs, i);
@@ -132,12 +146,27 @@
/* Subtle: stop on all counters to avoid race with
* setting our pm callback */
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+ if (!reset_value[i])
+ continue;
CTRL_READ(low, high, msrs, i);
CTRL_SET_INACTIVE(low);
CTRL_WRITE(low, high, msrs, i);
}
}
+static void athlon_shutdown(struct op_msrs const * const msrs)
+{
+ int i;
+
+ for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+ if (CTR_IS_RESERVED(msrs,i))
+ release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+ }
+ for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+ if (CTRL_IS_RESERVED(msrs,i))
+ release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+ }
+}
struct op_x86_model_spec const op_athlon_spec = {
.num_counters = NUM_COUNTERS,
@@ -146,5 +175,6 @@
.setup_ctrs = &athlon_setup_ctrs,
.check_ctrs = &athlon_check_ctrs,
.start = &athlon_start,
- .stop = &athlon_stop
+ .stop = &athlon_stop,
+ .shutdown = &athlon_shutdown
};
diff --git a/arch/i386/oprofile/op_model_p4.c b/arch/i386/oprofile/op_model_p4.c
index 7c61d35..4792592 100644
--- a/arch/i386/oprofile/op_model_p4.c
+++ b/arch/i386/oprofile/op_model_p4.c
@@ -32,7 +32,7 @@
#define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2)
static unsigned int num_counters = NUM_COUNTERS_NON_HT;
-
+static unsigned int num_controls = NUM_CONTROLS_NON_HT;
/* this has to be checked dynamically since the
hyper-threadedness of a chip is discovered at
@@ -40,8 +40,10 @@
static inline void setup_num_counters(void)
{
#ifdef CONFIG_SMP
- if (smp_num_siblings == 2)
+ if (smp_num_siblings == 2){
num_counters = NUM_COUNTERS_HT2;
+ num_controls = NUM_CONTROLS_HT2;
+ }
#endif
}
@@ -97,15 +99,6 @@
#define NUM_UNUSED_CCCRS NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT
-/* All cccr we don't use. */
-static int p4_unused_cccr[NUM_UNUSED_CCCRS] = {
- MSR_P4_BPU_CCCR1, MSR_P4_BPU_CCCR3,
- MSR_P4_MS_CCCR1, MSR_P4_MS_CCCR3,
- MSR_P4_FLAME_CCCR1, MSR_P4_FLAME_CCCR3,
- MSR_P4_IQ_CCCR0, MSR_P4_IQ_CCCR1,
- MSR_P4_IQ_CCCR2, MSR_P4_IQ_CCCR3
-};
-
/* p4 event codes in libop/op_event.h are indices into this table. */
static struct p4_event_binding p4_events[NUM_EVENTS] = {
@@ -372,6 +365,8 @@
#define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
#define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
+#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
#define CTR_READ(l,h,i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h));} while (0)
#define CTR_WRITE(l,i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1);} while (0)
#define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
@@ -401,29 +396,34 @@
static void p4_fill_in_addresses(struct op_msrs * const msrs)
{
unsigned int i;
- unsigned int addr, stag;
+ unsigned int addr, cccraddr, stag;
setup_num_counters();
stag = get_stagger();
- /* the counter registers we pay attention to */
+ /* initialize some registers */
for (i = 0; i < num_counters; ++i) {
- msrs->counters[i].addr =
- p4_counters[VIRT_CTR(stag, i)].counter_address;
+ msrs->counters[i].addr = 0;
}
-
- /* FIXME: bad feeling, we don't save the 10 counters we don't use. */
-
- /* 18 CCCR registers */
- for (i = 0, addr = MSR_P4_BPU_CCCR0 + stag;
- addr <= MSR_P4_IQ_CCCR5; ++i, addr += addr_increment()) {
- msrs->controls[i].addr = addr;
+ for (i = 0; i < num_controls; ++i) {
+ msrs->controls[i].addr = 0;
}
+ /* the counter & cccr registers we pay attention to */
+ for (i = 0; i < num_counters; ++i) {
+ addr = p4_counters[VIRT_CTR(stag, i)].counter_address;
+ cccraddr = p4_counters[VIRT_CTR(stag, i)].cccr_address;
+ if (reserve_perfctr_nmi(addr)){
+ msrs->counters[i].addr = addr;
+ msrs->controls[i].addr = cccraddr;
+ }
+ }
+
/* 43 ESCR registers in three or four discontiguous group */
for (addr = MSR_P4_BSU_ESCR0 + stag;
addr < MSR_P4_IQ_ESCR0; ++i, addr += addr_increment()) {
- msrs->controls[i].addr = addr;
+ if (reserve_evntsel_nmi(addr))
+ msrs->controls[i].addr = addr;
}
/* no IQ_ESCR0/1 on some models, we save a seconde time BSU_ESCR0/1
@@ -431,47 +431,57 @@
if (boot_cpu_data.x86_model >= 0x3) {
for (addr = MSR_P4_BSU_ESCR0 + stag;
addr <= MSR_P4_BSU_ESCR1; ++i, addr += addr_increment()) {
- msrs->controls[i].addr = addr;
+ if (reserve_evntsel_nmi(addr))
+ msrs->controls[i].addr = addr;
}
} else {
for (addr = MSR_P4_IQ_ESCR0 + stag;
addr <= MSR_P4_IQ_ESCR1; ++i, addr += addr_increment()) {
- msrs->controls[i].addr = addr;
+ if (reserve_evntsel_nmi(addr))
+ msrs->controls[i].addr = addr;
}
}
for (addr = MSR_P4_RAT_ESCR0 + stag;
addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) {
- msrs->controls[i].addr = addr;
+ if (reserve_evntsel_nmi(addr))
+ msrs->controls[i].addr = addr;
}
for (addr = MSR_P4_MS_ESCR0 + stag;
addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) {
- msrs->controls[i].addr = addr;
+ if (reserve_evntsel_nmi(addr))
+ msrs->controls[i].addr = addr;
}
for (addr = MSR_P4_IX_ESCR0 + stag;
addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) {
- msrs->controls[i].addr = addr;
+ if (reserve_evntsel_nmi(addr))
+ msrs->controls[i].addr = addr;
}
/* there are 2 remaining non-contiguously located ESCRs */
if (num_counters == NUM_COUNTERS_NON_HT) {
/* standard non-HT CPUs handle both remaining ESCRs*/
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
+ if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5))
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
+ if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4))
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
} else if (stag == 0) {
/* HT CPUs give the first remainder to the even thread, as
the 32nd control register */
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
+ if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR4))
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR4;
} else {
/* and two copies of the second to the odd thread,
for the 22st and 23nd control registers */
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
- msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
+ if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5)) {
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
+ msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
+ }
}
}
@@ -544,7 +554,6 @@
{
unsigned int i;
unsigned int low, high;
- unsigned int addr;
unsigned int stag;
stag = get_stagger();
@@ -557,59 +566,24 @@
/* clear the cccrs we will use */
for (i = 0 ; i < num_counters ; i++) {
+ if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ continue;
rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
CCCR_CLEAR(low);
CCCR_SET_REQUIRED_BITS(low);
wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
}
- /* clear cccrs outside our concern */
- for (i = stag ; i < NUM_UNUSED_CCCRS ; i += addr_increment()) {
- rdmsr(p4_unused_cccr[i], low, high);
- CCCR_CLEAR(low);
- CCCR_SET_REQUIRED_BITS(low);
- wrmsr(p4_unused_cccr[i], low, high);
- }
-
/* clear all escrs (including those outside our concern) */
- for (addr = MSR_P4_BSU_ESCR0 + stag;
- addr < MSR_P4_IQ_ESCR0; addr += addr_increment()) {
- wrmsr(addr, 0, 0);
+ for (i = num_counters; i < num_controls; i++) {
+ if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ continue;
+ wrmsr(msrs->controls[i].addr, 0, 0);
}
- /* On older models clear also MSR_P4_IQ_ESCR0/1 */
- if (boot_cpu_data.x86_model < 0x3) {
- wrmsr(MSR_P4_IQ_ESCR0, 0, 0);
- wrmsr(MSR_P4_IQ_ESCR1, 0, 0);
- }
-
- for (addr = MSR_P4_RAT_ESCR0 + stag;
- addr <= MSR_P4_SSU_ESCR0; ++i, addr += addr_increment()) {
- wrmsr(addr, 0, 0);
- }
-
- for (addr = MSR_P4_MS_ESCR0 + stag;
- addr <= MSR_P4_TC_ESCR1; addr += addr_increment()){
- wrmsr(addr, 0, 0);
- }
-
- for (addr = MSR_P4_IX_ESCR0 + stag;
- addr <= MSR_P4_CRU_ESCR3; addr += addr_increment()){
- wrmsr(addr, 0, 0);
- }
-
- if (num_counters == NUM_COUNTERS_NON_HT) {
- wrmsr(MSR_P4_CRU_ESCR4, 0, 0);
- wrmsr(MSR_P4_CRU_ESCR5, 0, 0);
- } else if (stag == 0) {
- wrmsr(MSR_P4_CRU_ESCR4, 0, 0);
- } else {
- wrmsr(MSR_P4_CRU_ESCR5, 0, 0);
- }
-
/* setup all counters */
for (i = 0 ; i < num_counters ; ++i) {
- if (counter_config[i].enabled) {
+ if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs,i))) {
reset_value[i] = counter_config[i].count;
pmc_setup_one_p4_counter(i);
CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i));
@@ -696,12 +670,32 @@
stag = get_stagger();
for (i = 0; i < num_counters; ++i) {
+ if (!reset_value[i])
+ continue;
CCCR_READ(low, high, VIRT_CTR(stag, i));
CCCR_SET_DISABLE(low);
CCCR_WRITE(low, high, VIRT_CTR(stag, i));
}
}
+static void p4_shutdown(struct op_msrs const * const msrs)
+{
+ int i;
+
+ for (i = 0 ; i < num_counters ; ++i) {
+ if (CTR_IS_RESERVED(msrs,i))
+ release_perfctr_nmi(msrs->counters[i].addr);
+ }
+ /* some of the control registers are specially reserved in
+ * conjunction with the counter registers (hence the starting offset).
+ * This saves a few bits.
+ */
+ for (i = num_counters ; i < num_controls ; ++i) {
+ if (CTRL_IS_RESERVED(msrs,i))
+ release_evntsel_nmi(msrs->controls[i].addr);
+ }
+}
+
#ifdef CONFIG_SMP
struct op_x86_model_spec const op_p4_ht2_spec = {
@@ -711,7 +705,8 @@
.setup_ctrs = &p4_setup_ctrs,
.check_ctrs = &p4_check_ctrs,
.start = &p4_start,
- .stop = &p4_stop
+ .stop = &p4_stop,
+ .shutdown = &p4_shutdown
};
#endif
@@ -722,5 +717,6 @@
.setup_ctrs = &p4_setup_ctrs,
.check_ctrs = &p4_check_ctrs,
.start = &p4_start,
- .stop = &p4_stop
+ .stop = &p4_stop,
+ .shutdown = &p4_shutdown
};
diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c
index 5c3ab4b..f88e05b 100644
--- a/arch/i386/oprofile/op_model_ppro.c
+++ b/arch/i386/oprofile/op_model_ppro.c
@@ -22,10 +22,12 @@
#define NUM_COUNTERS 2
#define NUM_CONTROLS 2
+#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), -1);} while (0)
#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
#define CTRL_READ(l,h,msrs,c) do {rdmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
#define CTRL_WRITE(l,h,msrs,c) do {wrmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
@@ -41,11 +43,21 @@
static void ppro_fill_in_addresses(struct op_msrs * const msrs)
{
- msrs->counters[0].addr = MSR_P6_PERFCTR0;
- msrs->counters[1].addr = MSR_P6_PERFCTR1;
+ int i;
+
+ for (i=0; i < NUM_COUNTERS; i++) {
+ if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
+ msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
+ else
+ msrs->counters[i].addr = 0;
+ }
- msrs->controls[0].addr = MSR_P6_EVNTSEL0;
- msrs->controls[1].addr = MSR_P6_EVNTSEL1;
+ for (i=0; i < NUM_CONTROLS; i++) {
+ if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
+ msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
+ else
+ msrs->controls[i].addr = 0;
+ }
}
@@ -56,6 +68,8 @@
/* clear all counters */
for (i = 0 ; i < NUM_CONTROLS; ++i) {
+ if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ continue;
CTRL_READ(low, high, msrs, i);
CTRL_CLEAR(low);
CTRL_WRITE(low, high, msrs, i);
@@ -63,12 +77,14 @@
/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (unlikely(!CTR_IS_RESERVED(msrs,i)))
+ continue;
CTR_WRITE(1, msrs, i);
}
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if (counter_config[i].enabled) {
+ if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) {
reset_value[i] = counter_config[i].count;
CTR_WRITE(counter_config[i].count, msrs, i);
@@ -81,6 +97,8 @@
CTRL_SET_UM(low, counter_config[i].unit_mask);
CTRL_SET_EVENT(low, counter_config[i].event);
CTRL_WRITE(low, high, msrs, i);
+ } else {
+ reset_value[i] = 0;
}
}
}
@@ -93,6 +111,8 @@
int i;
for (i = 0 ; i < NUM_COUNTERS; ++i) {
+ if (!reset_value[i])
+ continue;
CTR_READ(low, high, msrs, i);
if (CTR_OVERFLOWED(low)) {
oprofile_add_sample(regs, i);
@@ -118,18 +138,38 @@
static void ppro_start(struct op_msrs const * const msrs)
{
unsigned int low,high;
- CTRL_READ(low, high, msrs, 0);
- CTRL_SET_ACTIVE(low);
- CTRL_WRITE(low, high, msrs, 0);
+
+ if (reset_value[0]) {
+ CTRL_READ(low, high, msrs, 0);
+ CTRL_SET_ACTIVE(low);
+ CTRL_WRITE(low, high, msrs, 0);
+ }
}
static void ppro_stop(struct op_msrs const * const msrs)
{
unsigned int low,high;
- CTRL_READ(low, high, msrs, 0);
- CTRL_SET_INACTIVE(low);
- CTRL_WRITE(low, high, msrs, 0);
+
+ if (reset_value[0]) {
+ CTRL_READ(low, high, msrs, 0);
+ CTRL_SET_INACTIVE(low);
+ CTRL_WRITE(low, high, msrs, 0);
+ }
+}
+
+static void ppro_shutdown(struct op_msrs const * const msrs)
+{
+ int i;
+
+ for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+ if (CTR_IS_RESERVED(msrs,i))
+ release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
+ }
+ for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+ if (CTRL_IS_RESERVED(msrs,i))
+ release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
+ }
}
@@ -140,5 +180,6 @@
.setup_ctrs = &ppro_setup_ctrs,
.check_ctrs = &ppro_check_ctrs,
.start = &ppro_start,
- .stop = &ppro_stop
+ .stop = &ppro_stop,
+ .shutdown = &ppro_shutdown
};
diff --git a/arch/i386/oprofile/op_x86_model.h b/arch/i386/oprofile/op_x86_model.h
index 123b7e9..abb1aa9 100644
--- a/arch/i386/oprofile/op_x86_model.h
+++ b/arch/i386/oprofile/op_x86_model.h
@@ -40,6 +40,7 @@
struct op_msrs const * const msrs);
void (*start)(struct op_msrs const * const msrs);
void (*stop)(struct op_msrs const * const msrs);
+ void (*shutdown)(struct op_msrs const * const msrs);
};
extern struct op_x86_model_spec const op_ppro_spec;
diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile
index 62ad75c..1594d2f 100644
--- a/arch/i386/pci/Makefile
+++ b/arch/i386/pci/Makefile
@@ -11,4 +11,4 @@
pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
-obj-y += $(pci-y) common.o
+obj-y += $(pci-y) common.o early.o
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 0a362e3..68bce194 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -242,6 +242,10 @@
acpi_noirq_set();
return NULL;
}
+ else if (!strcmp(str, "noearly")) {
+ pci_probe |= PCI_PROBE_NOEARLY;
+ return NULL;
+ }
#ifndef CONFIG_X86_VISWS
else if (!strcmp(str, "usepirqmask")) {
pci_probe |= PCI_USE_PIRQ_MASK;
diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c
index 5d81fb5..5acf0b4 100644
--- a/arch/i386/pci/direct.c
+++ b/arch/i386/pci/direct.c
@@ -254,7 +254,16 @@
return works;
}
-void __init pci_direct_init(void)
+void __init pci_direct_init(int type)
+{
+ printk(KERN_INFO "PCI: Using configuration type %d\n", type);
+ if (type == 1)
+ raw_pci_ops = &pci_direct_conf1;
+ else
+ raw_pci_ops = &pci_direct_conf2;
+}
+
+int __init pci_direct_probe(void)
{
struct resource *region, *region2;
@@ -264,19 +273,16 @@
if (!region)
goto type2;
- if (pci_check_type1()) {
- printk(KERN_INFO "PCI: Using configuration type 1\n");
- raw_pci_ops = &pci_direct_conf1;
- return;
- }
+ if (pci_check_type1())
+ return 1;
release_resource(region);
type2:
if ((pci_probe & PCI_PROBE_CONF2) == 0)
- return;
+ return 0;
region = request_region(0xCF8, 4, "PCI conf2");
if (!region)
- return;
+ return 0;
region2 = request_region(0xC000, 0x1000, "PCI conf2");
if (!region2)
goto fail2;
@@ -284,10 +290,11 @@
if (pci_check_type2()) {
printk(KERN_INFO "PCI: Using configuration type 2\n");
raw_pci_ops = &pci_direct_conf2;
- return;
+ return 2;
}
release_resource(region2);
fail2:
release_resource(region);
+ return 0;
}
diff --git a/arch/i386/pci/early.c b/arch/i386/pci/early.c
new file mode 100644
index 0000000..713d6c8
--- /dev/null
+++ b/arch/i386/pci/early.c
@@ -0,0 +1,52 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include <asm/io.h>
+#include "pci.h"
+
+/* Direct PCI access. This is used for PCI accesses in early boot before
+ the PCI subsystem works. */
+
+#define PDprintk(x...)
+
+u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
+{
+ u32 v;
+ outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+ v = inl(0xcfc);
+ if (v != 0xffffffff)
+ PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
+ return v;
+}
+
+u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
+{
+ u8 v;
+ outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+ v = inb(0xcfc + (offset&3));
+ PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
+ return v;
+}
+
+u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
+{
+ u16 v;
+ outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+ v = inw(0xcfc + (offset&2));
+ PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
+ return v;
+}
+
+void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
+ u32 val)
+{
+ PDprintk("%x writing to %x: %x\n", slot, offset, val);
+ outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+ outl(val, 0xcfc);
+}
+
+int early_pci_allowed(void)
+{
+ return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
+ PCI_PROBE_CONF1;
+}
diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c
index 51087a9..d028e1b 100644
--- a/arch/i386/pci/init.c
+++ b/arch/i386/pci/init.c
@@ -6,8 +6,13 @@
in the right sequence from here. */
static __init int pci_access_init(void)
{
+ int type = 0;
+
+#ifdef CONFIG_PCI_DIRECT
+ type = pci_direct_probe();
+#endif
#ifdef CONFIG_PCI_MMCONFIG
- pci_mmcfg_init();
+ pci_mmcfg_init(type);
#endif
if (raw_pci_ops)
return 0;
@@ -21,7 +26,7 @@
* fails.
*/
#ifdef CONFIG_PCI_DIRECT
- pci_direct_init();
+ pci_direct_init(type);
#endif
return 0;
}
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 972180f..05be8db 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -151,6 +151,38 @@
.write = pci_mmcfg_write,
};
+
+static __init void pci_mmcfg_insert_resources(void)
+{
+#define PCI_MMCFG_RESOURCE_NAME_LEN 19
+ int i;
+ struct resource *res;
+ char *names;
+ unsigned num_buses;
+
+ res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
+ pci_mmcfg_config_num, GFP_KERNEL);
+
+ if (!res) {
+ printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
+ return;
+ }
+
+ names = (void *)&res[pci_mmcfg_config_num];
+ for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
+ num_buses = pci_mmcfg_config[i].end_bus_number -
+ pci_mmcfg_config[i].start_bus_number + 1;
+ res->name = names;
+ snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
+ pci_mmcfg_config[i].pci_segment_group_number);
+ res->start = pci_mmcfg_config[i].base_address;
+ res->end = res->start + (num_buses << 20) - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ insert_resource(&iomem_resource, res);
+ names += PCI_MMCFG_RESOURCE_NAME_LEN;
+ }
+}
+
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
@@ -187,7 +219,9 @@
}
}
-void __init pci_mmcfg_init(void)
+
+
+void __init pci_mmcfg_init(int type)
{
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
@@ -198,7 +232,9 @@
(pci_mmcfg_config[0].base_address == 0))
return;
- if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
+ /* Only do this check when type 1 works. If it doesn't work
+ assume we run on a Mac and always use MCFG */
+ if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
@@ -212,4 +248,5 @@
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
unreachable_devices();
+ pci_mmcfg_insert_resources();
}
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index bf4e793..1814f74 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -17,6 +17,7 @@
#define PCI_PROBE_CONF2 0x0004
#define PCI_PROBE_MMCONF 0x0008
#define PCI_PROBE_MASK 0x000f
+#define PCI_PROBE_NOEARLY 0x0010
#define PCI_NO_SORT 0x0100
#define PCI_BIOS_SORT 0x0200
@@ -81,7 +82,9 @@
extern int pci_conf1_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value);
-extern void pci_direct_init(void);
+extern int pci_direct_probe(void);
+extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
-extern void pci_mmcfg_init(void);
+extern void pci_mmcfg_init(int type);
extern void pcibios_sort(void);
+
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index f521f2f..0b7f701 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -356,6 +356,9 @@
MAX_NUMNODES will be 2^(This value).
If in doubt, use the default.
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
# VIRTUAL_MEM_MAP has been retained for historical reasons.
config VIRTUAL_MEM_MAP
@@ -420,6 +423,14 @@
config SGI_SN
def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
+config IA64_ESI
+ bool "ESI (Extensible SAL Interface) support"
+ help
+ If you say Y here, support is built into the kernel to
+ make ESI calls. ESI calls are used to support vendor-specific
+ firmware extensions, such as the ability to inject memory-errors
+ for test-purposes. If you're unsure, say N.
+
source "drivers/sn/Kconfig"
source "drivers/firmware/Kconfig"
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 6aa3c51..bddbd22 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1942,7 +1942,7 @@
unsigned int __unused[4];
};
-#ifdef CONFIG_SYSCTL
+#ifdef CONFIG_SYSCTL_SYSCALL
asmlinkage long
sys32_sysctl (struct sysctl32 __user *args)
{
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index ad8215a..3149749 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -32,6 +32,11 @@
obj-$(CONFIG_AUDIT) += audit.o
mca_recovery-y += mca_drv.o mca_drv_asm.o
+obj-$(CONFIG_IA64_ESI) += esi.o
+ifneq ($(CONFIG_IA64_ESI),)
+obj-y += esi_stub.o # must be in kernel proper
+endif
+
# The gate DSO image is built using a special linker script.
targets += gate.so gate-syms.o
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index fef0657..12701cf 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1605,8 +1605,8 @@
data8 sys_ni_syscall // 1295 reserved for ppoll
data8 sys_unshare
data8 sys_splice
- data8 sys_ni_syscall // reserved for set_robust_list
- data8 sys_ni_syscall // reserved for get_robust_list
+ data8 sys_set_robust_list
+ data8 sys_get_robust_list
data8 sys_sync_file_range // 1300
data8 sys_tee
data8 sys_vmsplice
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
new file mode 100644
index 0000000..ebf4e98
--- /dev/null
+++ b/arch/ia64/kernel/esi.c
@@ -0,0 +1,205 @@
+/*
+ * Extensible SAL Interface (ESI) support routines.
+ *
+ * Copyright (C) 2006 Hewlett-Packard Co
+ * Alex Williamson <alex.williamson@hp.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/esi.h>
+#include <asm/sal.h>
+
+MODULE_AUTHOR("Alex Williamson <alex.williamson@hp.com>");
+MODULE_DESCRIPTION("Extensible SAL Interface (ESI) support");
+MODULE_LICENSE("GPL");
+
+#define MODULE_NAME "esi"
+
+#define ESI_TABLE_GUID \
+ EFI_GUID(0x43EA58DC, 0xCF28, 0x4b06, 0xB3, \
+ 0x91, 0xB7, 0x50, 0x59, 0x34, 0x2B, 0xD4)
+
+enum esi_systab_entry_type {
+ ESI_DESC_ENTRY_POINT = 0
+};
+
+/*
+ * Entry type: Size:
+ * 0 48
+ */
+#define ESI_DESC_SIZE(type) "\060"[(unsigned) (type)]
+
+typedef struct ia64_esi_desc_entry_point {
+ u8 type;
+ u8 reserved1[15];
+ u64 esi_proc;
+ u64 gp;
+ efi_guid_t guid;
+} ia64_esi_desc_entry_point_t;
+
+struct pdesc {
+ void *addr;
+ void *gp;
+};
+
+static struct ia64_sal_systab *esi_systab;
+
+static int __init esi_init (void)
+{
+ efi_config_table_t *config_tables;
+ struct ia64_sal_systab *systab;
+ unsigned long esi = 0;
+ char *p;
+ int i;
+
+ config_tables = __va(efi.systab->tables);
+
+ for (i = 0; i < (int) efi.systab->nr_tables; ++i) {
+ if (efi_guidcmp(config_tables[i].guid, ESI_TABLE_GUID) == 0) {
+ esi = config_tables[i].table;
+ break;
+ }
+ }
+
+ if (!esi)
+ return -ENODEV;;
+
+ systab = __va(esi);
+
+ if (strncmp(systab->signature, "ESIT", 4) != 0) {
+ printk(KERN_ERR "bad signature in ESI system table!");
+ return -ENODEV;
+ }
+
+ p = (char *) (systab + 1);
+ for (i = 0; i < systab->entry_count; i++) {
+ /*
+ * The first byte of each entry type contains the type
+ * descriptor.
+ */
+ switch (*p) {
+ case ESI_DESC_ENTRY_POINT:
+ break;
+ default:
+ printk(KERN_WARNING "Unkown table type %d found in "
+ "ESI table, ignoring rest of table\n", *p);
+ return -ENODEV;
+ }
+
+ p += ESI_DESC_SIZE(*p);
+ }
+
+ esi_systab = systab;
+ return 0;
+}
+
+
+int ia64_esi_call (efi_guid_t guid, struct ia64_sal_retval *isrvp,
+ enum esi_proc_type proc_type, u64 func,
+ u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6,
+ u64 arg7)
+{
+ struct ia64_fpreg fr[6];
+ unsigned long flags = 0;
+ int i;
+ char *p;
+
+ if (!esi_systab)
+ return -1;
+
+ p = (char *) (esi_systab + 1);
+ for (i = 0; i < esi_systab->entry_count; i++) {
+ if (*p == ESI_DESC_ENTRY_POINT) {
+ ia64_esi_desc_entry_point_t *esi = (void *)p;
+ if (!efi_guidcmp(guid, esi->guid)) {
+ ia64_sal_handler esi_proc;
+ struct pdesc pdesc;
+
+ pdesc.addr = __va(esi->esi_proc);
+ pdesc.gp = __va(esi->gp);
+
+ esi_proc = (ia64_sal_handler) &pdesc;
+
+ ia64_save_scratch_fpregs(fr);
+ if (proc_type == ESI_PROC_SERIALIZED)
+ spin_lock_irqsave(&sal_lock, flags);
+ else if (proc_type == ESI_PROC_MP_SAFE)
+ local_irq_save(flags);
+ else
+ preempt_disable();
+ *isrvp = (*esi_proc)(func, arg1, arg2, arg3,
+ arg4, arg5, arg6, arg7);
+ if (proc_type == ESI_PROC_SERIALIZED)
+ spin_unlock_irqrestore(&sal_lock,
+ flags);
+ else if (proc_type == ESI_PROC_MP_SAFE)
+ local_irq_restore(flags);
+ else
+ preempt_enable();
+ ia64_load_scratch_fpregs(fr);
+ return 0;
+ }
+ }
+ p += ESI_DESC_SIZE(*p);
+ }
+ return -1;
+}
+EXPORT_SYMBOL_GPL(ia64_esi_call);
+
+int ia64_esi_call_phys (efi_guid_t guid, struct ia64_sal_retval *isrvp,
+ u64 func, u64 arg1, u64 arg2, u64 arg3, u64 arg4,
+ u64 arg5, u64 arg6, u64 arg7)
+{
+ struct ia64_fpreg fr[6];
+ unsigned long flags;
+ u64 esi_params[8];
+ char *p;
+ int i;
+
+ if (!esi_systab)
+ return -1;
+
+ p = (char *) (esi_systab + 1);
+ for (i = 0; i < esi_systab->entry_count; i++) {
+ if (*p == ESI_DESC_ENTRY_POINT) {
+ ia64_esi_desc_entry_point_t *esi = (void *)p;
+ if (!efi_guidcmp(guid, esi->guid)) {
+ ia64_sal_handler esi_proc;
+ struct pdesc pdesc;
+
+ pdesc.addr = (void *)esi->esi_proc;
+ pdesc.gp = (void *)esi->gp;
+
+ esi_proc = (ia64_sal_handler) &pdesc;
+
+ esi_params[0] = func;
+ esi_params[1] = arg1;
+ esi_params[2] = arg2;
+ esi_params[3] = arg3;
+ esi_params[4] = arg4;
+ esi_params[5] = arg5;
+ esi_params[6] = arg6;
+ esi_params[7] = arg7;
+ ia64_save_scratch_fpregs(fr);
+ spin_lock_irqsave(&sal_lock, flags);
+ *isrvp = esi_call_phys(esi_proc, esi_params);
+ spin_unlock_irqrestore(&sal_lock, flags);
+ ia64_load_scratch_fpregs(fr);
+ return 0;
+ }
+ }
+ p += ESI_DESC_SIZE(*p);
+ }
+ return -1;
+}
+EXPORT_SYMBOL_GPL(ia64_esi_call_phys);
+
+static void __exit esi_exit (void)
+{
+}
+
+module_init(esi_init);
+module_exit(esi_exit); /* makes module removable... */
diff --git a/arch/ia64/kernel/esi_stub.S b/arch/ia64/kernel/esi_stub.S
new file mode 100644
index 0000000..6b3d6c1
--- /dev/null
+++ b/arch/ia64/kernel/esi_stub.S
@@ -0,0 +1,96 @@
+/*
+ * ESI call stub.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ * Alex Williamson <alex.williamson@hp.com>
+ *
+ * Based on EFI call stub by David Mosberger. The stub is virtually
+ * identical to the one for EFI phys-mode calls, except that ESI
+ * calls may have up to 8 arguments, so they get passed to this routine
+ * through memory.
+ *
+ * This stub allows us to make ESI calls in physical mode with interrupts
+ * turned off. ESI calls may not support calling from virtual mode.
+ *
+ * Google for "Extensible SAL specification" for a document describing the
+ * ESI standard.
+ */
+
+/*
+ * PSR settings as per SAL spec (Chapter 8 in the "IA-64 System
+ * Abstraction Layer Specification", revision 2.6e). Note that
+ * psr.dfl and psr.dfh MUST be cleared, despite what this manual says.
+ * Otherwise, SAL dies whenever it's trying to do an IA-32 BIOS call
+ * (the br.ia instruction fails unless psr.dfl and psr.dfh are
+ * cleared). Fortunately, SAL promises not to touch the floating
+ * point regs, so at least we don't have to save f2-f127.
+ */
+#define PSR_BITS_TO_CLEAR \
+ (IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_RT | \
+ IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED | \
+ IA64_PSR_DFL | IA64_PSR_DFH)
+
+#define PSR_BITS_TO_SET \
+ (IA64_PSR_BN)
+
+#include <asm/processor.h>
+#include <asm/asmmacro.h>
+
+/*
+ * Inputs:
+ * in0 = address of function descriptor of ESI routine to call
+ * in1 = address of array of ESI parameters
+ *
+ * Outputs:
+ * r8 = result returned by called function
+ */
+GLOBAL_ENTRY(esi_call_phys)
+ .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2)
+ alloc loc1=ar.pfs,2,7,8,0
+ ld8 r2=[in0],8 // load ESI function's entry point
+ mov loc0=rp
+ .body
+ ;;
+ ld8 out0=[in1],8 // ESI params loaded from array
+ ;; // passing all as inputs doesn't work
+ ld8 out1=[in1],8
+ ;;
+ ld8 out2=[in1],8
+ ;;
+ ld8 out3=[in1],8
+ ;;
+ ld8 out4=[in1],8
+ ;;
+ ld8 out5=[in1],8
+ ;;
+ ld8 out6=[in1],8
+ ;;
+ ld8 out7=[in1]
+ mov loc2=gp // save global pointer
+ mov loc4=ar.rsc // save RSE configuration
+ mov ar.rsc=0 // put RSE in enforced lazy, LE mode
+ ;;
+ ld8 gp=[in0] // load ESI function's global pointer
+ movl r16=PSR_BITS_TO_CLEAR
+ mov loc3=psr // save processor status word
+ movl r17=PSR_BITS_TO_SET
+ ;;
+ or loc3=loc3,r17
+ mov b6=r2
+ ;;
+ andcm r16=loc3,r16 // get psr with IT, DT, and RT bits cleared
+ br.call.sptk.many rp=ia64_switch_mode_phys
+.ret0: mov loc5=r19 // old ar.bsp
+ mov loc6=r20 // old sp
+ br.call.sptk.many rp=b6 // call the ESI function
+.ret1: mov ar.rsc=0 // put RSE in enforced lazy, LE mode
+ mov r16=loc3 // save virtual mode psr
+ mov r19=loc5 // save virtual mode bspstore
+ mov r20=loc6 // save virtual mode sp
+ br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode
+.ret2: mov ar.rsc=loc4 // restore RSE configuration
+ mov ar.pfs=loc1
+ mov rp=loc0
+ mov gp=loc2
+ br.ret.sptk.many rp
+END(esi_call_phys)
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 3ead20f..879c181 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -105,5 +105,9 @@
# endif
#endif
+#if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
+extern void esi_call_phys (void);
+EXPORT_SYMBOL_GPL(esi_call_phys);
+#endif
extern char ia64_ivt[];
EXPORT_SYMBOL(ia64_ivt);
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 781960f..169ec3a 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -136,10 +136,8 @@
static int __kprobes unsupported_inst(uint template, uint slot,
uint major_opcode,
unsigned long kprobe_inst,
- struct kprobe *p)
+ unsigned long addr)
{
- unsigned long addr = (unsigned long)p->addr;
-
if (bundle_encoding[template][slot] == I) {
switch (major_opcode) {
case 0x0: //I_UNIT_MISC_OPCODE:
@@ -217,7 +215,7 @@
struct kprobe *p)
{
unsigned long break_inst = BREAK_INST;
- bundle_t *bundle = &p->ainsn.insn.bundle;
+ bundle_t *bundle = &p->opcode.bundle;
/*
* Copy the original kprobe_inst qualifying predicate(qp)
@@ -423,11 +421,9 @@
unsigned long *kprobe_addr = (unsigned long *)(addr & ~0xFULL);
unsigned long kprobe_inst=0;
unsigned int slot = addr & 0xf, template, major_opcode = 0;
- bundle_t *bundle = &p->ainsn.insn.bundle;
+ bundle_t *bundle;
- memcpy(&p->opcode.bundle, kprobe_addr, sizeof(bundle_t));
- memcpy(&p->ainsn.insn.bundle, kprobe_addr, sizeof(bundle_t));
-
+ bundle = &((kprobe_opcode_t *)kprobe_addr)->bundle;
template = bundle->quad0.template;
if(valid_kprobe_addr(template, slot, addr))
@@ -440,30 +436,30 @@
/* Get kprobe_inst and major_opcode from the bundle */
get_kprobe_inst(bundle, slot, &kprobe_inst, &major_opcode);
- if (unsupported_inst(template, slot, major_opcode, kprobe_inst, p))
+ if (unsupported_inst(template, slot, major_opcode, kprobe_inst, addr))
return -EINVAL;
+
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+ memcpy(&p->opcode, kprobe_addr, sizeof(kprobe_opcode_t));
+ memcpy(p->ainsn.insn, kprobe_addr, sizeof(kprobe_opcode_t));
+
prepare_break_inst(template, slot, major_opcode, kprobe_inst, p);
return 0;
}
-void __kprobes flush_insn_slot(struct kprobe *p)
-{
- unsigned long arm_addr;
-
- arm_addr = ((unsigned long)&p->opcode.bundle) & ~0xFULL;
- flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t));
-}
-
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
unsigned long addr = (unsigned long)p->addr;
unsigned long arm_addr = addr & ~0xFULL;
- flush_insn_slot(p);
- memcpy((char *)arm_addr, &p->ainsn.insn.bundle, sizeof(bundle_t));
- flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t));
+ flush_icache_range((unsigned long)p->ainsn.insn,
+ (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
+ memcpy((char *)arm_addr, &p->opcode, sizeof(kprobe_opcode_t));
+ flush_icache_range(arm_addr, arm_addr + sizeof(kprobe_opcode_t));
}
void __kprobes arch_disarm_kprobe(struct kprobe *p)
@@ -471,11 +467,18 @@
unsigned long addr = (unsigned long)p->addr;
unsigned long arm_addr = addr & ~0xFULL;
- /* p->opcode contains the original unaltered bundle */
- memcpy((char *) arm_addr, (char *) &p->opcode.bundle, sizeof(bundle_t));
- flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t));
+ /* p->ainsn.insn contains the original unaltered kprobe_opcode_t */
+ memcpy((char *) arm_addr, (char *) p->ainsn.insn,
+ sizeof(kprobe_opcode_t));
+ flush_icache_range(arm_addr, arm_addr + sizeof(kprobe_opcode_t));
}
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ mutex_lock(&kprobe_mutex);
+ free_insn_slot(p->ainsn.insn);
+ mutex_unlock(&kprobe_mutex);
+}
/*
* We are resuming execution after a single step fault, so the pt_regs
* structure reflects the register state after we executed the instruction
@@ -486,12 +489,12 @@
*/
static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
{
- unsigned long bundle_addr = ((unsigned long) (&p->opcode.bundle)) & ~0xFULL;
+ unsigned long bundle_addr = (unsigned long) (&p->ainsn.insn->bundle);
unsigned long resume_addr = (unsigned long)p->addr & ~0xFULL;
unsigned long template;
int slot = ((unsigned long)p->addr & 0xf);
- template = p->opcode.bundle.quad0.template;
+ template = p->ainsn.insn->bundle.quad0.template;
if (slot == 1 && bundle_encoding[template][1] == L)
slot = 2;
@@ -553,7 +556,7 @@
static void __kprobes prepare_ss(struct kprobe *p, struct pt_regs *regs)
{
- unsigned long bundle_addr = (unsigned long) &p->opcode.bundle;
+ unsigned long bundle_addr = (unsigned long) &p->ainsn.insn->bundle;
unsigned long slot = (unsigned long)p->addr & 0xf;
/* single step inline if break instruction */
@@ -768,6 +771,12 @@
*/
if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
return 1;
+ /*
+ * In case the user-specified fault handler returned
+ * zero, try to fix up.
+ */
+ if (ia64_done_with_exception(regs))
+ return 1;
/*
* Let ia64_do_page_fault() fix it.
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 2fbe453..bfbd898 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -54,6 +54,9 @@
*
* 2005-10-07 Keith Owens <kaos@sgi.com>
* Add notify_die() hooks.
+ *
+ * 2006-09-15 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+ * Add printing support for MCA/INIT.
*/
#include <linux/types.h>
#include <linux/init.h>
@@ -136,11 +139,175 @@
static int mca_init __initdata;
+/*
+ * limited & delayed printing support for MCA/INIT handler
+ */
+
+#define mprintk(fmt...) ia64_mca_printk(fmt)
+
+#define MLOGBUF_SIZE (512+256*NR_CPUS)
+#define MLOGBUF_MSGMAX 256
+static char mlogbuf[MLOGBUF_SIZE];
+static DEFINE_SPINLOCK(mlogbuf_wlock); /* mca context only */
+static DEFINE_SPINLOCK(mlogbuf_rlock); /* normal context only */
+static unsigned long mlogbuf_start;
+static unsigned long mlogbuf_end;
+static unsigned int mlogbuf_finished = 0;
+static unsigned long mlogbuf_timestamp = 0;
+
+static int loglevel_save = -1;
+#define BREAK_LOGLEVEL(__console_loglevel) \
+ oops_in_progress = 1; \
+ if (loglevel_save < 0) \
+ loglevel_save = __console_loglevel; \
+ __console_loglevel = 15;
+
+#define RESTORE_LOGLEVEL(__console_loglevel) \
+ if (loglevel_save >= 0) { \
+ __console_loglevel = loglevel_save; \
+ loglevel_save = -1; \
+ } \
+ mlogbuf_finished = 0; \
+ oops_in_progress = 0;
+
+/*
+ * Push messages into buffer, print them later if not urgent.
+ */
+void ia64_mca_printk(const char *fmt, ...)
+{
+ va_list args;
+ int printed_len;
+ char temp_buf[MLOGBUF_MSGMAX];
+ char *p;
+
+ va_start(args, fmt);
+ printed_len = vscnprintf(temp_buf, sizeof(temp_buf), fmt, args);
+ va_end(args);
+
+ /* Copy the output into mlogbuf */
+ if (oops_in_progress) {
+ /* mlogbuf was abandoned, use printk directly instead. */
+ printk(temp_buf);
+ } else {
+ spin_lock(&mlogbuf_wlock);
+ for (p = temp_buf; *p; p++) {
+ unsigned long next = (mlogbuf_end + 1) % MLOGBUF_SIZE;
+ if (next != mlogbuf_start) {
+ mlogbuf[mlogbuf_end] = *p;
+ mlogbuf_end = next;
+ } else {
+ /* buffer full */
+ break;
+ }
+ }
+ mlogbuf[mlogbuf_end] = '\0';
+ spin_unlock(&mlogbuf_wlock);
+ }
+}
+EXPORT_SYMBOL(ia64_mca_printk);
+
+/*
+ * Print buffered messages.
+ * NOTE: call this after returning normal context. (ex. from salinfod)
+ */
+void ia64_mlogbuf_dump(void)
+{
+ char temp_buf[MLOGBUF_MSGMAX];
+ char *p;
+ unsigned long index;
+ unsigned long flags;
+ unsigned int printed_len;
+
+ /* Get output from mlogbuf */
+ while (mlogbuf_start != mlogbuf_end) {
+ temp_buf[0] = '\0';
+ p = temp_buf;
+ printed_len = 0;
+
+ spin_lock_irqsave(&mlogbuf_rlock, flags);
+
+ index = mlogbuf_start;
+ while (index != mlogbuf_end) {
+ *p = mlogbuf[index];
+ index = (index + 1) % MLOGBUF_SIZE;
+ if (!*p)
+ break;
+ p++;
+ if (++printed_len >= MLOGBUF_MSGMAX - 1)
+ break;
+ }
+ *p = '\0';
+ if (temp_buf[0])
+ printk(temp_buf);
+ mlogbuf_start = index;
+
+ mlogbuf_timestamp = 0;
+ spin_unlock_irqrestore(&mlogbuf_rlock, flags);
+ }
+}
+EXPORT_SYMBOL(ia64_mlogbuf_dump);
+
+/*
+ * Call this if system is going to down or if immediate flushing messages to
+ * console is required. (ex. recovery was failed, crash dump is going to be
+ * invoked, long-wait rendezvous etc.)
+ * NOTE: this should be called from monarch.
+ */
+static void ia64_mlogbuf_finish(int wait)
+{
+ BREAK_LOGLEVEL(console_loglevel);
+
+ spin_lock_init(&mlogbuf_rlock);
+ ia64_mlogbuf_dump();
+ printk(KERN_EMERG "mlogbuf_finish: printing switched to urgent mode, "
+ "MCA/INIT might be dodgy or fail.\n");
+
+ if (!wait)
+ return;
+
+ /* wait for console */
+ printk("Delaying for 5 seconds...\n");
+ udelay(5*1000000);
+
+ mlogbuf_finished = 1;
+}
+EXPORT_SYMBOL(ia64_mlogbuf_finish);
+
+/*
+ * Print buffered messages from INIT context.
+ */
+static void ia64_mlogbuf_dump_from_init(void)
+{
+ if (mlogbuf_finished)
+ return;
+
+ if (mlogbuf_timestamp && (mlogbuf_timestamp + 30*HZ > jiffies)) {
+ printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT "
+ " and the system seems to be messed up.\n");
+ ia64_mlogbuf_finish(0);
+ return;
+ }
+
+ if (!spin_trylock(&mlogbuf_rlock)) {
+ printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT. "
+ "Generated messages other than stack dump will be "
+ "buffered to mlogbuf and will be printed later.\n");
+ printk(KERN_ERR "INIT: If messages would not printed after "
+ "this INIT, wait 30sec and assert INIT again.\n");
+ if (!mlogbuf_timestamp)
+ mlogbuf_timestamp = jiffies;
+ return;
+ }
+ spin_unlock(&mlogbuf_rlock);
+ ia64_mlogbuf_dump();
+}
static void inline
ia64_mca_spin(const char *func)
{
- printk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func);
+ if (monarch_cpu == smp_processor_id())
+ ia64_mlogbuf_finish(0);
+ mprintk(KERN_EMERG "%s: spinning here, not returning to SAL\n", func);
while (1)
cpu_relax();
}
@@ -344,9 +511,6 @@
/* SAL spec states this should run w/ interrupts enabled */
local_irq_enable();
- /* Get the CPE error record and log it */
- ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
-
spin_lock(&cpe_history_lock);
if (!cpe_poll_enabled && cpe_vector >= 0) {
@@ -375,7 +539,7 @@
mod_timer(&cpe_poll_timer, jiffies + MIN_CPE_POLL_INTERVAL);
/* lock already released, get out now */
- return IRQ_HANDLED;
+ goto out;
} else {
cpe_history[index++] = now;
if (index == CPE_HISTORY_LENGTH)
@@ -383,6 +547,10 @@
}
}
spin_unlock(&cpe_history_lock);
+out:
+ /* Get the CPE error record and log it */
+ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CPE);
+
return IRQ_HANDLED;
}
@@ -988,18 +1156,22 @@
}
if (!missing)
goto all_in;
- printk(KERN_INFO "OS %s slave did not rendezvous on cpu", type);
+ /*
+ * Maybe slave(s) dead. Print buffered messages immediately.
+ */
+ ia64_mlogbuf_finish(0);
+ mprintk(KERN_INFO "OS %s slave did not rendezvous on cpu", type);
for_each_online_cpu(c) {
if (c == monarch)
continue;
if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE)
- printk(" %d", c);
+ mprintk(" %d", c);
}
- printk("\n");
+ mprintk("\n");
return;
all_in:
- printk(KERN_INFO "All OS %s slaves have reached rendezvous\n", type);
+ mprintk(KERN_INFO "All OS %s slaves have reached rendezvous\n", type);
return;
}
@@ -1027,10 +1199,8 @@
struct ia64_mca_notify_die nd =
{ .sos = sos, .monarch_cpu = &monarch_cpu };
- oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */
- console_loglevel = 15; /* make sure printks make it to console */
- printk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d monarch=%ld\n",
- sos->proc_state_param, cpu, sos->monarch);
+ mprintk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d "
+ "monarch=%ld\n", sos->proc_state_param, cpu, sos->monarch);
previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA");
monarch_cpu = cpu;
@@ -1066,6 +1236,9 @@
rh->severity = sal_log_severity_corrected;
ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA);
sos->os_status = IA64_MCA_CORRECTED;
+ } else {
+ /* Dump buffered message to console */
+ ia64_mlogbuf_finish(1);
}
if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover)
== NOTIFY_STOP)
@@ -1106,9 +1279,6 @@
/* SAL spec states this should run w/ interrupts enabled */
local_irq_enable();
- /* Get the CMC error record and log it */
- ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
-
spin_lock(&cmc_history_lock);
if (!cmc_polling_enabled) {
int i, count = 1; /* we know 1 happened now */
@@ -1141,7 +1311,7 @@
mod_timer(&cmc_poll_timer, jiffies + CMC_POLL_INTERVAL);
/* lock already released, get out now */
- return IRQ_HANDLED;
+ goto out;
} else {
cmc_history[index++] = now;
if (index == CMC_HISTORY_LENGTH)
@@ -1149,6 +1319,10 @@
}
}
spin_unlock(&cmc_history_lock);
+out:
+ /* Get the CMC error record and log it */
+ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
+
return IRQ_HANDLED;
}
@@ -1305,6 +1479,15 @@
struct task_struct *g, *t;
if (val != DIE_INIT_MONARCH_PROCESS)
return NOTIFY_DONE;
+
+ /*
+ * FIXME: mlogbuf will brim over with INIT stack dumps.
+ * To enable show_stack from INIT, we use oops_in_progress which should
+ * be used in real oops. This would cause something wrong after INIT.
+ */
+ BREAK_LOGLEVEL(console_loglevel);
+ ia64_mlogbuf_dump_from_init();
+
printk(KERN_ERR "Processes interrupted by INIT -");
for_each_online_cpu(c) {
struct ia64_sal_os_state *s;
@@ -1326,6 +1509,8 @@
} while_each_thread (g, t);
read_unlock(&tasklist_lock);
}
+ /* FIXME: This will not restore zapped printk locks. */
+ RESTORE_LOGLEVEL(console_loglevel);
return NOTIFY_DONE;
}
@@ -1357,12 +1542,9 @@
struct ia64_mca_notify_die nd =
{ .sos = sos, .monarch_cpu = &monarch_cpu };
- oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */
- console_loglevel = 15; /* make sure printks make it to console */
-
(void) notify_die(DIE_INIT_ENTER, "INIT", regs, (long)&nd, 0, 0);
- printk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n",
+ mprintk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n",
sos->proc_state_param, cpu, sos->monarch);
salinfo_log_wakeup(SAL_INFO_TYPE_INIT, NULL, 0, 0);
@@ -1375,7 +1557,7 @@
* fix their proms and get their customers updated.
*/
if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) {
- printk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n",
+ mprintk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n",
__FUNCTION__, cpu);
atomic_dec(&slaves);
sos->monarch = 1;
@@ -1387,7 +1569,7 @@
* fix their proms and get their customers updated.
*/
if (sos->monarch && atomic_add_return(1, &monarchs) > 1) {
- printk(KERN_WARNING "%s: Demoting cpu %d to slave.\n",
+ mprintk(KERN_WARNING "%s: Demoting cpu %d to slave.\n",
__FUNCTION__, cpu);
atomic_dec(&monarchs);
sos->monarch = 0;
@@ -1408,7 +1590,7 @@
if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
- printk("Slave on cpu %d returning to normal service.\n", cpu);
+ mprintk("Slave on cpu %d returning to normal service.\n", cpu);
set_curr_task(cpu, previous_current);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
atomic_dec(&slaves);
@@ -1426,7 +1608,7 @@
* same serial line, the user will need some time to switch out of the BMC before
* the dump begins.
*/
- printk("Delaying for 5 seconds...\n");
+ mprintk("Delaying for 5 seconds...\n");
udelay(5*1000000);
ia64_wait_for_slaves(cpu, "INIT");
/* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through
@@ -1439,7 +1621,7 @@
if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
- printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu);
+ mprintk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu);
atomic_dec(&monarchs);
set_curr_task(cpu, previous_current);
monarch_cpu = -1;
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 9604749..c6b607c 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -1025,18 +1025,13 @@
ia64_set_kernel_registers:
add temp3=MCA_SP_OFFSET, r3
- add temp4=MCA_SOS_OFFSET+SOS(OS_GP), r3
mov b0=r2 // save return address
GET_IA64_MCA_DATA(temp1)
;;
- add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp
add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack
add r13=temp1, r3 // set current to start of MCA/INIT stack
add r20=temp1, r3 // physical start of MCA/INIT stack
;;
- ld8 r1=[temp4] // OS GP from SAL OS state
- ;;
- DATA_PA_TO_VA(r1,temp1)
DATA_PA_TO_VA(r12,temp2)
DATA_PA_TO_VA(r13,temp3)
;;
@@ -1067,6 +1062,10 @@
mov cr.itir=r18
mov cr.ifa=r13
mov r20=IA64_TR_CURRENT_STACK
+
+ movl r17=FPSR_DEFAULT
+ ;;
+ mov.m ar.fpsr=r17 // set ar.fpsr to kernel default value
;;
itr.d dtr[r20]=r21
;;
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 8db6e0c..a45009d 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -79,14 +79,30 @@
fatal_mca(const char *fmt, ...)
{
va_list args;
+ char buf[256];
va_start(args, fmt);
- vprintk(fmt, args);
+ vsnprintf(buf, sizeof(buf), fmt, args);
va_end(args);
+ ia64_mca_printk(KERN_ALERT "MCA: %s\n", buf);
return MCA_NOT_RECOVERED;
}
+static int
+mca_recovered(const char *fmt, ...)
+{
+ va_list args;
+ char buf[256];
+
+ va_start(args, fmt);
+ vsnprintf(buf, sizeof(buf), fmt, args);
+ va_end(args);
+ ia64_mca_printk(KERN_INFO "MCA: %s\n", buf);
+
+ return MCA_RECOVERED;
+}
+
/**
* mca_page_isolate - isolate a poisoned page in order not to use it later
* @paddr: poisoned memory location
@@ -140,6 +156,7 @@
void
mca_handler_bh(unsigned long paddr, void *iip, unsigned long ipsr)
{
+ ia64_mlogbuf_dump();
printk(KERN_ERR "OS_MCA: process [cpu %d, pid: %d, uid: %d, "
"iip: %p, psr: 0x%lx,paddr: 0x%lx](%s) encounters MCA.\n",
raw_smp_processor_id(), current->pid, current->uid,
@@ -440,7 +457,7 @@
/* Is target address valid? */
if (!pbci->tv)
- return fatal_mca(KERN_ALERT "MCA: target address not valid\n");
+ return fatal_mca("target address not valid");
/*
* cpu read or memory-mapped io read
@@ -458,7 +475,7 @@
/* Is minstate valid? */
if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate))
- return fatal_mca(KERN_ALERT "MCA: minstate not valid\n");
+ return fatal_mca("minstate not valid");
psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr);
psr2 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_xpsr);
@@ -492,13 +509,14 @@
psr2->bn = 1;
psr2->i = 0;
- return MCA_RECOVERED;
+ return mca_recovered("user memory corruption. "
+ "kill affected process - recovered.");
}
}
- return fatal_mca(KERN_ALERT "MCA: kernel context not recovered,"
- " iip 0x%lx\n", pmsa->pmsa_iip);
+ return fatal_mca("kernel context not recovered, iip 0x%lx\n",
+ pmsa->pmsa_iip);
}
/**
@@ -584,13 +602,13 @@
* The machine check is corrected.
*/
if (psp->cm == 1)
- return MCA_RECOVERED;
+ return mca_recovered("machine check is already corrected.");
/*
* The error was not contained. Software must be reset.
*/
if (psp->us || psp->ci == 0)
- return fatal_mca(KERN_ALERT "MCA: error not contained\n");
+ return fatal_mca("error not contained");
/*
* The cache check and bus check bits have four possible states
@@ -601,22 +619,22 @@
* 1 1 Memory error, attempt recovery
*/
if (psp->bc == 0 || pbci == NULL)
- return fatal_mca(KERN_ALERT "MCA: No bus check\n");
+ return fatal_mca("No bus check");
/*
* Sorry, we cannot handle so many.
*/
if (peidx_bus_check_num(peidx) > 1)
- return fatal_mca(KERN_ALERT "MCA: Too many bus checks\n");
+ return fatal_mca("Too many bus checks");
/*
* Well, here is only one bus error.
*/
if (pbci->ib)
- return fatal_mca(KERN_ALERT "MCA: Internal Bus error\n");
+ return fatal_mca("Internal Bus error");
if (pbci->cc)
- return fatal_mca(KERN_ALERT "MCA: Cache-cache error\n");
+ return fatal_mca("Cache-cache error");
if (pbci->eb && pbci->bsi > 0)
- return fatal_mca(KERN_ALERT "MCA: External bus check fatal status\n");
+ return fatal_mca("External bus check fatal status");
/*
* This is a local MCA and estimated as recoverble external bus error.
@@ -628,7 +646,7 @@
/*
* On account of strange SAL error record, we cannot recover.
*/
- return fatal_mca(KERN_ALERT "MCA: Strange SAL record\n");
+ return fatal_mca("Strange SAL record");
}
/**
@@ -657,10 +675,10 @@
/* Now, OS can recover when there is one processor error section */
if (n_proc_err > 1)
- return fatal_mca(KERN_ALERT "MCA: Too Many Errors\n");
+ return fatal_mca("Too Many Errors");
else if (n_proc_err == 0)
- /* Weird SAL record ... We need not to recover */
- return fatal_mca(KERN_ALERT "MCA: Weird SAL record\n");
+ /* Weird SAL record ... We can't do anything */
+ return fatal_mca("Weird SAL record");
/* Make index of processor error section */
mca_make_peidx((sal_log_processor_info_t*)
@@ -671,7 +689,7 @@
/* Check whether MCA is global or not */
if (is_mca_global(&peidx, &pbci, sos))
- return fatal_mca(KERN_ALERT "MCA: global MCA\n");
+ return fatal_mca("global MCA");
/* Try to recover a processor error */
return recover_from_processor_error(platform_err, &slidx, &peidx,
diff --git a/arch/ia64/kernel/mca_drv.h b/arch/ia64/kernel/mca_drv.h
index 31a2e52..c85e943 100644
--- a/arch/ia64/kernel/mca_drv.h
+++ b/arch/ia64/kernel/mca_drv.h
@@ -118,3 +118,7 @@
extern const struct mca_table_entry *search_mca_tables (unsigned long addr);
extern int mca_recover_range(unsigned long);
+extern void ia64_mca_printk(const char * fmt, ...)
+ __attribute__ ((format (printf, 1, 2)));
+extern void ia64_mlogbuf_dump(void);
+
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 7bb7696..281004f 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -63,6 +63,9 @@
#define PFM_INVALID_ACTIVATION (~0UL)
+#define PFM_NUM_PMC_REGS 64 /* PMC save area for ctxsw */
+#define PFM_NUM_PMD_REGS 64 /* PMD save area for ctxsw */
+
/*
* depth of message queue
*/
@@ -297,14 +300,17 @@
unsigned long ctx_reload_pmcs[4]; /* bitmask of force reload PMC on ctxsw in */
unsigned long ctx_used_monitors[4]; /* bitmask of monitor PMC being used */
- unsigned long ctx_pmcs[IA64_NUM_PMC_REGS]; /* saved copies of PMC values */
+ unsigned long ctx_pmcs[PFM_NUM_PMC_REGS]; /* saved copies of PMC values */
unsigned int ctx_used_ibrs[1]; /* bitmask of used IBR (speedup ctxsw in) */
unsigned int ctx_used_dbrs[1]; /* bitmask of used DBR (speedup ctxsw in) */
unsigned long ctx_dbrs[IA64_NUM_DBG_REGS]; /* DBR values (cache) when not loaded */
unsigned long ctx_ibrs[IA64_NUM_DBG_REGS]; /* IBR values (cache) when not loaded */
- pfm_counter_t ctx_pmds[IA64_NUM_PMD_REGS]; /* software state for PMDS */
+ pfm_counter_t ctx_pmds[PFM_NUM_PMD_REGS]; /* software state for PMDS */
+
+ unsigned long th_pmcs[PFM_NUM_PMC_REGS]; /* PMC thread save state */
+ unsigned long th_pmds[PFM_NUM_PMD_REGS]; /* PMD thread save state */
u64 ctx_saved_psr_up; /* only contains psr.up value */
@@ -868,7 +874,6 @@
pfm_mask_monitoring(struct task_struct *task)
{
pfm_context_t *ctx = PFM_GET_CTX(task);
- struct thread_struct *th = &task->thread;
unsigned long mask, val, ovfl_mask;
int i;
@@ -889,7 +894,7 @@
* So in both cases, the live register contains the owner's
* state. We can ONLY touch the PMU registers and NOT the PSR.
*
- * As a consequence to this call, the thread->pmds[] array
+ * As a consequence to this call, the ctx->th_pmds[] array
* contains stale information which must be ignored
* when context is reloaded AND monitoring is active (see
* pfm_restart).
@@ -924,9 +929,9 @@
mask = ctx->ctx_used_monitors[0] >> PMU_FIRST_COUNTER;
for(i= PMU_FIRST_COUNTER; mask; i++, mask>>=1) {
if ((mask & 0x1) == 0UL) continue;
- ia64_set_pmc(i, th->pmcs[i] & ~0xfUL);
- th->pmcs[i] &= ~0xfUL;
- DPRINT_ovfl(("pmc[%d]=0x%lx\n", i, th->pmcs[i]));
+ ia64_set_pmc(i, ctx->th_pmcs[i] & ~0xfUL);
+ ctx->th_pmcs[i] &= ~0xfUL;
+ DPRINT_ovfl(("pmc[%d]=0x%lx\n", i, ctx->th_pmcs[i]));
}
/*
* make all of this visible
@@ -943,7 +948,6 @@
pfm_restore_monitoring(struct task_struct *task)
{
pfm_context_t *ctx = PFM_GET_CTX(task);
- struct thread_struct *th = &task->thread;
unsigned long mask, ovfl_mask;
unsigned long psr, val;
int i, is_system;
@@ -1009,9 +1013,9 @@
mask = ctx->ctx_used_monitors[0] >> PMU_FIRST_COUNTER;
for(i= PMU_FIRST_COUNTER; mask; i++, mask>>=1) {
if ((mask & 0x1) == 0UL) continue;
- th->pmcs[i] = ctx->ctx_pmcs[i];
- ia64_set_pmc(i, th->pmcs[i]);
- DPRINT(("[%d] pmc[%d]=0x%lx\n", task->pid, i, th->pmcs[i]));
+ ctx->th_pmcs[i] = ctx->ctx_pmcs[i];
+ ia64_set_pmc(i, ctx->th_pmcs[i]);
+ DPRINT(("[%d] pmc[%d]=0x%lx\n", task->pid, i, ctx->th_pmcs[i]));
}
ia64_srlz_d();
@@ -1070,7 +1074,6 @@
static inline void
pfm_copy_pmds(struct task_struct *task, pfm_context_t *ctx)
{
- struct thread_struct *thread = &task->thread;
unsigned long ovfl_val = pmu_conf->ovfl_val;
unsigned long mask = ctx->ctx_all_pmds[0];
unsigned long val;
@@ -1092,11 +1095,11 @@
ctx->ctx_pmds[i].val = val & ~ovfl_val;
val &= ovfl_val;
}
- thread->pmds[i] = val;
+ ctx->th_pmds[i] = val;
DPRINT(("pmd[%d]=0x%lx soft_val=0x%lx\n",
i,
- thread->pmds[i],
+ ctx->th_pmds[i],
ctx->ctx_pmds[i].val));
}
}
@@ -1107,7 +1110,6 @@
static inline void
pfm_copy_pmcs(struct task_struct *task, pfm_context_t *ctx)
{
- struct thread_struct *thread = &task->thread;
unsigned long mask = ctx->ctx_all_pmcs[0];
int i;
@@ -1115,8 +1117,8 @@
for (i=0; mask; i++, mask>>=1) {
/* masking 0 with ovfl_val yields 0 */
- thread->pmcs[i] = ctx->ctx_pmcs[i];
- DPRINT(("pmc[%d]=0x%lx\n", i, thread->pmcs[i]));
+ ctx->th_pmcs[i] = ctx->ctx_pmcs[i];
+ DPRINT(("pmc[%d]=0x%lx\n", i, ctx->th_pmcs[i]));
}
}
@@ -2860,7 +2862,6 @@
static int
pfm_write_pmcs(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
{
- struct thread_struct *thread = NULL;
struct task_struct *task;
pfarg_reg_t *req = (pfarg_reg_t *)arg;
unsigned long value, pmc_pm;
@@ -2881,7 +2882,6 @@
if (state == PFM_CTX_ZOMBIE) return -EINVAL;
if (is_loaded) {
- thread = &task->thread;
/*
* In system wide and when the context is loaded, access can only happen
* when the caller is running on the CPU being monitored by the session.
@@ -3036,7 +3036,7 @@
*
* The value in ctx_pmcs[] can only be changed in pfm_write_pmcs().
*
- * The value in thread->pmcs[] may be modified on overflow, i.e., when
+ * The value in th_pmcs[] may be modified on overflow, i.e., when
* monitoring needs to be stopped.
*/
if (is_monitor) CTX_USED_MONITOR(ctx, 1UL << cnum);
@@ -3050,7 +3050,7 @@
/*
* write thread state
*/
- if (is_system == 0) thread->pmcs[cnum] = value;
+ if (is_system == 0) ctx->th_pmcs[cnum] = value;
/*
* write hardware register if we can
@@ -3102,7 +3102,6 @@
static int
pfm_write_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
{
- struct thread_struct *thread = NULL;
struct task_struct *task;
pfarg_reg_t *req = (pfarg_reg_t *)arg;
unsigned long value, hw_value, ovfl_mask;
@@ -3126,7 +3125,6 @@
* the owner of the local PMU.
*/
if (likely(is_loaded)) {
- thread = &task->thread;
/*
* In system wide and when the context is loaded, access can only happen
* when the caller is running on the CPU being monitored by the session.
@@ -3234,7 +3232,7 @@
/*
* write thread state
*/
- if (is_system == 0) thread->pmds[cnum] = hw_value;
+ if (is_system == 0) ctx->th_pmds[cnum] = hw_value;
/*
* write hardware register if we can
@@ -3300,7 +3298,6 @@
static int
pfm_read_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
{
- struct thread_struct *thread = NULL;
struct task_struct *task;
unsigned long val = 0UL, lval, ovfl_mask, sval;
pfarg_reg_t *req = (pfarg_reg_t *)arg;
@@ -3324,7 +3321,6 @@
if (state == PFM_CTX_ZOMBIE) return -EINVAL;
if (likely(is_loaded)) {
- thread = &task->thread;
/*
* In system wide and when the context is loaded, access can only happen
* when the caller is running on the CPU being monitored by the session.
@@ -3386,7 +3382,7 @@
* if context is zombie, then task does not exist anymore.
* In this case, we use the full value saved in the context (pfm_flush_regs()).
*/
- val = is_loaded ? thread->pmds[cnum] : 0UL;
+ val = is_loaded ? ctx->th_pmds[cnum] : 0UL;
}
rd_func = pmu_conf->pmd_desc[cnum].read_check;
@@ -4355,8 +4351,8 @@
pfm_copy_pmds(task, ctx);
pfm_copy_pmcs(task, ctx);
- pmcs_source = thread->pmcs;
- pmds_source = thread->pmds;
+ pmcs_source = ctx->th_pmcs;
+ pmds_source = ctx->th_pmds;
/*
* always the case for system-wide
@@ -5865,14 +5861,12 @@
pfm_save_regs(struct task_struct *task)
{
pfm_context_t *ctx;
- struct thread_struct *t;
unsigned long flags;
u64 psr;
ctx = PFM_GET_CTX(task);
if (ctx == NULL) return;
- t = &task->thread;
/*
* we always come here with interrupts ALREADY disabled by
@@ -5930,19 +5924,19 @@
* guarantee we will be schedule at that same
* CPU again.
*/
- pfm_save_pmds(t->pmds, ctx->ctx_used_pmds[0]);
+ pfm_save_pmds(ctx->th_pmds, ctx->ctx_used_pmds[0]);
/*
* save pmc0 ia64_srlz_d() done in pfm_save_pmds()
* we will need it on the restore path to check
* for pending overflow.
*/
- t->pmcs[0] = ia64_get_pmc(0);
+ ctx->th_pmcs[0] = ia64_get_pmc(0);
/*
* unfreeze PMU if had pending overflows
*/
- if (t->pmcs[0] & ~0x1UL) pfm_unfreeze_pmu();
+ if (ctx->th_pmcs[0] & ~0x1UL) pfm_unfreeze_pmu();
/*
* finally, allow context access.
@@ -5987,7 +5981,6 @@
pfm_lazy_save_regs (struct task_struct *task)
{
pfm_context_t *ctx;
- struct thread_struct *t;
unsigned long flags;
{ u64 psr = pfm_get_psr();
@@ -5995,7 +5988,6 @@
}
ctx = PFM_GET_CTX(task);
- t = &task->thread;
/*
* we need to mask PMU overflow here to
@@ -6020,19 +6012,19 @@
/*
* save all the pmds we use
*/
- pfm_save_pmds(t->pmds, ctx->ctx_used_pmds[0]);
+ pfm_save_pmds(ctx->th_pmds, ctx->ctx_used_pmds[0]);
/*
* save pmc0 ia64_srlz_d() done in pfm_save_pmds()
* it is needed to check for pended overflow
* on the restore path
*/
- t->pmcs[0] = ia64_get_pmc(0);
+ ctx->th_pmcs[0] = ia64_get_pmc(0);
/*
* unfreeze PMU if had pending overflows
*/
- if (t->pmcs[0] & ~0x1UL) pfm_unfreeze_pmu();
+ if (ctx->th_pmcs[0] & ~0x1UL) pfm_unfreeze_pmu();
/*
* now get can unmask PMU interrupts, they will
@@ -6051,7 +6043,6 @@
pfm_load_regs (struct task_struct *task)
{
pfm_context_t *ctx;
- struct thread_struct *t;
unsigned long pmc_mask = 0UL, pmd_mask = 0UL;
unsigned long flags;
u64 psr, psr_up;
@@ -6062,11 +6053,10 @@
BUG_ON(GET_PMU_OWNER());
- t = &task->thread;
/*
* possible on unload
*/
- if (unlikely((t->flags & IA64_THREAD_PM_VALID) == 0)) return;
+ if (unlikely((task->thread.flags & IA64_THREAD_PM_VALID) == 0)) return;
/*
* we always come here with interrupts ALREADY disabled by
@@ -6148,21 +6138,21 @@
*
* XXX: optimize here
*/
- if (pmd_mask) pfm_restore_pmds(t->pmds, pmd_mask);
- if (pmc_mask) pfm_restore_pmcs(t->pmcs, pmc_mask);
+ if (pmd_mask) pfm_restore_pmds(ctx->th_pmds, pmd_mask);
+ if (pmc_mask) pfm_restore_pmcs(ctx->th_pmcs, pmc_mask);
/*
* check for pending overflow at the time the state
* was saved.
*/
- if (unlikely(PMC0_HAS_OVFL(t->pmcs[0]))) {
+ if (unlikely(PMC0_HAS_OVFL(ctx->th_pmcs[0]))) {
/*
* reload pmc0 with the overflow information
* On McKinley PMU, this will trigger a PMU interrupt
*/
- ia64_set_pmc(0, t->pmcs[0]);
+ ia64_set_pmc(0, ctx->th_pmcs[0]);
ia64_srlz_d();
- t->pmcs[0] = 0UL;
+ ctx->th_pmcs[0] = 0UL;
/*
* will replay the PMU interrupt
@@ -6215,7 +6205,6 @@
void
pfm_load_regs (struct task_struct *task)
{
- struct thread_struct *t;
pfm_context_t *ctx;
struct task_struct *owner;
unsigned long pmd_mask, pmc_mask;
@@ -6224,7 +6213,6 @@
owner = GET_PMU_OWNER();
ctx = PFM_GET_CTX(task);
- t = &task->thread;
psr = pfm_get_psr();
BUG_ON(psr & (IA64_PSR_UP|IA64_PSR_PP));
@@ -6287,22 +6275,22 @@
*/
pmc_mask = ctx->ctx_all_pmcs[0];
- pfm_restore_pmds(t->pmds, pmd_mask);
- pfm_restore_pmcs(t->pmcs, pmc_mask);
+ pfm_restore_pmds(ctx->th_pmds, pmd_mask);
+ pfm_restore_pmcs(ctx->th_pmcs, pmc_mask);
/*
* check for pending overflow at the time the state
* was saved.
*/
- if (unlikely(PMC0_HAS_OVFL(t->pmcs[0]))) {
+ if (unlikely(PMC0_HAS_OVFL(ctx->th_pmcs[0]))) {
/*
* reload pmc0 with the overflow information
* On McKinley PMU, this will trigger a PMU interrupt
*/
- ia64_set_pmc(0, t->pmcs[0]);
+ ia64_set_pmc(0, ctx->th_pmcs[0]);
ia64_srlz_d();
- t->pmcs[0] = 0UL;
+ ctx->th_pmcs[0] = 0UL;
/*
* will replay the PMU interrupt
@@ -6377,11 +6365,11 @@
*/
pfm_unfreeze_pmu();
} else {
- pmc0 = task->thread.pmcs[0];
+ pmc0 = ctx->th_pmcs[0];
/*
* clear whatever overflow status bits there were
*/
- task->thread.pmcs[0] = 0;
+ ctx->th_pmcs[0] = 0;
}
ovfl_val = pmu_conf->ovfl_val;
/*
@@ -6402,7 +6390,7 @@
/*
* can access PMU always true in system wide mode
*/
- val = pmd_val = can_access_pmu ? ia64_get_pmd(i) : task->thread.pmds[i];
+ val = pmd_val = can_access_pmu ? ia64_get_pmd(i) : ctx->th_pmds[i];
if (PMD_IS_COUNTING(i)) {
DPRINT(("[%d] pmd[%d] ctx_pmd=0x%lx hw_pmd=0x%lx\n",
@@ -6434,7 +6422,7 @@
DPRINT(("[%d] ctx_pmd[%d]=0x%lx pmd_val=0x%lx\n", task->pid, i, val, pmd_val));
- if (is_self) task->thread.pmds[i] = pmd_val;
+ if (is_self) ctx->th_pmds[i] = pmd_val;
ctx->ctx_pmds[i].val = val;
}
@@ -6678,7 +6666,7 @@
ffz(pmu_conf->ovfl_val));
/* sanity check */
- if (pmu_conf->num_pmds >= IA64_NUM_PMD_REGS || pmu_conf->num_pmcs >= IA64_NUM_PMC_REGS) {
+ if (pmu_conf->num_pmds >= PFM_NUM_PMD_REGS || pmu_conf->num_pmcs >= PFM_NUM_PMC_REGS) {
printk(KERN_ERR "perfmon: not enough pmc/pmd, perfmon disabled\n");
pmu_conf = NULL;
return -1;
@@ -6753,7 +6741,6 @@
dump_pmu_state(const char *from)
{
struct task_struct *task;
- struct thread_struct *t;
struct pt_regs *regs;
pfm_context_t *ctx;
unsigned long psr, dcr, info, flags;
@@ -6798,16 +6785,14 @@
ia64_psr(regs)->up = 0;
ia64_psr(regs)->pp = 0;
- t = ¤t->thread;
-
for (i=1; PMC_IS_LAST(i) == 0; i++) {
if (PMC_IS_IMPL(i) == 0) continue;
- printk("->CPU%d pmc[%d]=0x%lx thread_pmc[%d]=0x%lx\n", this_cpu, i, ia64_get_pmc(i), i, t->pmcs[i]);
+ printk("->CPU%d pmc[%d]=0x%lx thread_pmc[%d]=0x%lx\n", this_cpu, i, ia64_get_pmc(i), i, ctx->th_pmcs[i]);
}
for (i=1; PMD_IS_LAST(i) == 0; i++) {
if (PMD_IS_IMPL(i) == 0) continue;
- printk("->CPU%d pmd[%d]=0x%lx thread_pmd[%d]=0x%lx\n", this_cpu, i, ia64_get_pmd(i), i, t->pmds[i]);
+ printk("->CPU%d pmd[%d]=0x%lx thread_pmd[%d]=0x%lx\n", this_cpu, i, ia64_get_pmd(i), i, ctx->th_pmds[i]);
}
if (ctx) {
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 9065f0f..e63b8ca 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -266,6 +266,7 @@
/* Check for outstanding MCA/INIT records every minute (arbitrary) */
#define SALINFO_TIMER_DELAY (60*HZ)
static struct timer_list salinfo_timer;
+extern void ia64_mlogbuf_dump(void);
static void
salinfo_timeout_check(struct salinfo_data *data)
@@ -283,6 +284,7 @@
static void
salinfo_timeout (unsigned long arg)
{
+ ia64_mlogbuf_dump();
salinfo_timeout_check(salinfo_data + SAL_INFO_TYPE_MCA);
salinfo_timeout_check(salinfo_data + SAL_INFO_TYPE_INIT);
salinfo_timer.expires = jiffies + SALINFO_TIMER_DELAY;
@@ -332,6 +334,8 @@
if (cpu == -1)
goto retry;
+ ia64_mlogbuf_dump();
+
/* for next read, start checking at next CPU */
data->cpu_check = cpu;
if (++data->cpu_check == NR_CPUS)
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 7ad0d9c..84f93c0 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -509,7 +509,7 @@
{ 1UL << 1, "spontaneous deferral"},
{ 1UL << 2, "16-byte atomic ops" }
};
- char family[32], features[128], *cp, sep;
+ char features[128], *cp, sep;
struct cpuinfo_ia64 *c = v;
unsigned long mask;
unsigned long proc_freq;
@@ -517,12 +517,6 @@
mask = c->features;
- switch (c->family) {
- case 0x07: memcpy(family, "Itanium", 8); break;
- case 0x1f: memcpy(family, "Itanium 2", 10); break;
- default: sprintf(family, "%u", c->family); break;
- }
-
/* build the feature string: */
memcpy(features, " standard", 10);
cp = features;
@@ -553,8 +547,9 @@
"processor : %d\n"
"vendor : %s\n"
"arch : IA-64\n"
- "family : %s\n"
+ "family : %u\n"
"model : %u\n"
+ "model name : %s\n"
"revision : %u\n"
"archrev : %u\n"
"features :%s\n" /* don't change this---it _is_ right! */
@@ -563,7 +558,8 @@
"cpu MHz : %lu.%06lu\n"
"itc MHz : %lu.%06lu\n"
"BogoMIPS : %lu.%02lu\n",
- cpunum, c->vendor, family, c->model, c->revision, c->archrev,
+ cpunum, c->vendor, c->family, c->model,
+ c->model_name, c->revision, c->archrev,
features, c->ppn, c->number,
proc_freq / 1000, proc_freq % 1000,
c->itc_freq / 1000000, c->itc_freq % 1000000,
@@ -611,6 +607,31 @@
.show = show_cpuinfo
};
+static char brandname[128];
+
+static char * __cpuinit
+get_model_name(__u8 family, __u8 model)
+{
+ char brand[128];
+
+ if (ia64_pal_get_brand_info(brand)) {
+ if (family == 0x7)
+ memcpy(brand, "Merced", 7);
+ else if (family == 0x1f) switch (model) {
+ case 0: memcpy(brand, "McKinley", 9); break;
+ case 1: memcpy(brand, "Madison", 8); break;
+ case 2: memcpy(brand, "Madison up to 9M cache", 23); break;
+ } else
+ memcpy(brand, "Unknown", 8);
+ }
+ if (brandname[0] == '\0')
+ return strcpy(brandname, brand);
+ else if (strcmp(brandname, brand) == 0)
+ return brandname;
+ else
+ return kstrdup(brand, GFP_KERNEL);
+}
+
static void __cpuinit
identify_cpu (struct cpuinfo_ia64 *c)
{
@@ -640,7 +661,6 @@
pal_status_t status;
unsigned long impl_va_msb = 50, phys_addr_size = 44; /* Itanium defaults */
int i;
-
for (i = 0; i < 5; ++i)
cpuid.bits[i] = ia64_get_cpuid(i);
@@ -663,6 +683,7 @@
c->family = cpuid.field.family;
c->archrev = cpuid.field.archrev;
c->features = cpuid.field.features;
+ c->model_name = get_model_name(c->family, c->model);
status = ia64_pal_vm_summary(&vm1, &vm2);
if (status == PAL_STATUS_SUCCESS) {
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 6203ed4..f7d7f56 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -879,3 +879,27 @@
c->core_id = info.log1_cid;
c->thread_id = info.log1_tid;
}
+
+/*
+ * returns non zero, if multi-threading is enabled
+ * on at least one physical package. Due to hotplug cpu
+ * and (maxcpus=), all threads may not necessarily be enabled
+ * even though the processor supports multi-threading.
+ */
+int is_multithreading_enabled(void)
+{
+ int i, j;
+
+ for_each_present_cpu(i) {
+ for_each_present_cpu(j) {
+ if (j == i)
+ continue;
+ if ((cpu_data(j)->socket_id == cpu_data(i)->socket_id)) {
+ if (cpu_data(j)->core_id == cpu_data(i)->core_id)
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(is_multithreading_enabled);
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index 05bdf7a..5629b45 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -36,10 +36,8 @@
*/
if (!can_cpei_retarget() && is_cpu_cpei_target(num))
sysfs_cpus[num].cpu.no_control = 1;
-#ifdef CONFIG_NUMA
map_cpu_to_node(num, node_cpuid[num].nid);
#endif
-#endif
return register_cpu(&sysfs_cpus[num].cpu, num);
}
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 5b0d5f6..b3b2e38 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -184,7 +184,9 @@
*(.data.gate)
__stop_gate_section = .;
}
- . = ALIGN(PAGE_SIZE); /* make sure the gate page doesn't expose kernel data */
+ . = ALIGN(PAGE_SIZE); /* make sure the gate page doesn't expose
+ * kernel data
+ */
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET)
{ *(.data.read_mostly) }
@@ -202,7 +204,9 @@
*(.data.percpu)
__per_cpu_end = .;
}
- . = __phys_per_cpu_start + PERCPU_PAGE_SIZE; /* ensure percpu data fits into percpu page size */
+ . = __phys_per_cpu_start + PERCPU_PAGE_SIZE; /* ensure percpu data fits
+ * into percpu page size
+ */
data : { } :data
.data : AT(ADDR(.data) - LOAD_OFFSET)
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index e004143..daf977f 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -26,7 +26,6 @@
#include <asm/mca.h>
#ifdef CONFIG_VIRTUAL_MEM_MAP
-static unsigned long num_dma_physpages;
static unsigned long max_gap;
#endif
@@ -41,10 +40,11 @@
int i, total = 0, reserved = 0;
int shared = 0, cached = 0;
- printk("Mem-info:\n");
+ printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ printk(KERN_INFO "Free swap: %6ldkB\n",
+ nr_swap_pages<<(PAGE_SHIFT-10));
i = max_mapnr;
for (i = 0; i < max_mapnr; i++) {
if (!pfn_valid(i)) {
@@ -63,12 +63,12 @@
else if (page_count(mem_map + i))
shared += page_count(mem_map + i) - 1;
}
- printk("%d pages of RAM\n", total);
- printk("%d reserved pages\n", reserved);
- printk("%d pages shared\n", shared);
- printk("%d pages swap cached\n", cached);
- printk("%ld pages in page table cache\n",
- pgtable_quicklist_total_size());
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+ printk(KERN_INFO "%ld pages in page table cache\n",
+ pgtable_quicklist_total_size());
}
/* physical address where the bootmem map is located */
@@ -218,18 +218,6 @@
return 0;
}
-#ifdef CONFIG_VIRTUAL_MEM_MAP
-static int
-count_dma_pages (u64 start, u64 end, void *arg)
-{
- unsigned long *count = arg;
-
- if (start < MAX_DMA_ADDRESS)
- *count += (min(end, MAX_DMA_ADDRESS) - start) >> PAGE_SHIFT;
- return 0;
-}
-#endif
-
/*
* Set up the page tables.
*/
@@ -238,45 +226,22 @@
paging_init (void)
{
unsigned long max_dma;
- unsigned long zones_size[MAX_NR_ZONES];
-#ifdef CONFIG_VIRTUAL_MEM_MAP
- unsigned long zholes_size[MAX_NR_ZONES];
-#endif
-
- /* initialize mem_map[] */
-
- memset(zones_size, 0, sizeof(zones_size));
+ unsigned long nid = 0;
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
num_physpages = 0;
efi_memmap_walk(count_pages, &num_physpages);
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = max_dma;
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_VIRTUAL_MEM_MAP
- memset(zholes_size, 0, sizeof(zholes_size));
-
- num_dma_physpages = 0;
- efi_memmap_walk(count_dma_pages, &num_dma_physpages);
-
- if (max_low_pfn < max_dma) {
- zones_size[ZONE_DMA] = max_low_pfn;
- zholes_size[ZONE_DMA] = max_low_pfn - num_dma_physpages;
- } else {
- zones_size[ZONE_DMA] = max_dma;
- zholes_size[ZONE_DMA] = max_dma - num_dma_physpages;
- if (num_physpages > num_dma_physpages) {
- zones_size[ZONE_NORMAL] = max_low_pfn - max_dma;
- zholes_size[ZONE_NORMAL] =
- ((max_low_pfn - max_dma) -
- (num_physpages - num_dma_physpages));
- }
- }
-
+ efi_memmap_walk(register_active_ranges, &nid);
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
- free_area_init_node(0, NODE_DATA(0), zones_size, 0,
- zholes_size);
+ free_area_init_nodes(max_zone_pfns);
} else {
unsigned long map_size;
@@ -288,20 +253,19 @@
vmem_map = (struct page *) vmalloc_end;
efi_memmap_walk(create_mem_map_page_table, NULL);
- NODE_DATA(0)->node_mem_map = vmem_map;
- free_area_init_node(0, NODE_DATA(0), zones_size,
- 0, zholes_size);
+ /*
+ * alloc_node_mem_map makes an adjustment for mem_map
+ * which isn't compatible with vmem_map.
+ */
+ NODE_DATA(0)->node_mem_map = vmem_map +
+ find_min_pfn_with_active_regions();
+ free_area_init_nodes(max_zone_pfns);
printk("Virtual mem_map starts at 0x%p\n", mem_map);
}
#else /* !CONFIG_VIRTUAL_MEM_MAP */
- if (max_low_pfn < max_dma)
- zones_size[ZONE_DMA] = max_low_pfn;
- else {
- zones_size[ZONE_DMA] = max_dma;
- zones_size[ZONE_NORMAL] = max_low_pfn - max_dma;
- }
- free_area_init(zones_size);
+ add_active_range(0, 0, max_low_pfn);
+ free_area_init_nodes(max_zone_pfns);
#endif /* !CONFIG_VIRTUAL_MEM_MAP */
zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
}
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index d260bff..d497b6b 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -547,15 +547,16 @@
unsigned long total_present = 0;
pg_data_t *pgdat;
- printk("Mem-info:\n");
+ printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ printk(KERN_INFO "Free swap: %6ldkB\n",
+ nr_swap_pages<<(PAGE_SHIFT-10));
+ printk(KERN_INFO "Node memory in pages:\n");
for_each_online_pgdat(pgdat) {
unsigned long present;
unsigned long flags;
int shared = 0, cached = 0, reserved = 0;
- printk("Node ID: %d\n", pgdat->node_id);
pgdat_resize_lock(pgdat, &flags);
present = pgdat->node_present_pages;
for(i = 0; i < pgdat->node_spanned_pages; i++) {
@@ -579,18 +580,17 @@
total_reserved += reserved;
total_cached += cached;
total_shared += shared;
- printk("\t%ld pages of RAM\n", present);
- printk("\t%d reserved pages\n", reserved);
- printk("\t%d pages shared\n", shared);
- printk("\t%d pages swap cached\n", cached);
+ printk(KERN_INFO "Node %4d: RAM: %11ld, rsvd: %8d, "
+ "shrd: %10d, swpd: %10d\n", pgdat->node_id,
+ present, reserved, shared, cached);
}
- printk("%ld pages of RAM\n", total_present);
- printk("%d reserved pages\n", total_reserved);
- printk("%d pages shared\n", total_shared);
- printk("%d pages swap cached\n", total_cached);
- printk("Total of %ld pages in page table cache\n",
- pgtable_quicklist_total_size());
- printk("%d free buffer pages\n", nr_free_buffer_pages());
+ printk(KERN_INFO "%ld pages of RAM\n", total_present);
+ printk(KERN_INFO "%d reserved pages\n", total_reserved);
+ printk(KERN_INFO "%d pages shared\n", total_shared);
+ printk(KERN_INFO "%d pages swap cached\n", total_cached);
+ printk(KERN_INFO "Total of %ld pages in page table cache\n",
+ pgtable_quicklist_total_size());
+ printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages());
}
/**
@@ -654,6 +654,7 @@
{
unsigned long end = start + len;
+ add_active_range(node, start >> PAGE_SHIFT, end >> PAGE_SHIFT);
mem_data[node].num_physpages += len >> PAGE_SHIFT;
if (start <= __pa(MAX_DMA_ADDRESS))
mem_data[node].num_dma_physpages +=
@@ -678,10 +679,10 @@
void __init paging_init(void)
{
unsigned long max_dma;
- unsigned long zones_size[MAX_NR_ZONES];
- unsigned long zholes_size[MAX_NR_ZONES];
unsigned long pfn_offset = 0;
+ unsigned long max_pfn = 0;
int node;
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
@@ -698,47 +699,20 @@
#endif
for_each_online_node(node) {
- memset(zones_size, 0, sizeof(zones_size));
- memset(zholes_size, 0, sizeof(zholes_size));
-
num_physpages += mem_data[node].num_physpages;
-
- if (mem_data[node].min_pfn >= max_dma) {
- /* All of this node's memory is above ZONE_DMA */
- zones_size[ZONE_NORMAL] = mem_data[node].max_pfn -
- mem_data[node].min_pfn;
- zholes_size[ZONE_NORMAL] = mem_data[node].max_pfn -
- mem_data[node].min_pfn -
- mem_data[node].num_physpages;
- } else if (mem_data[node].max_pfn < max_dma) {
- /* All of this node's memory is in ZONE_DMA */
- zones_size[ZONE_DMA] = mem_data[node].max_pfn -
- mem_data[node].min_pfn;
- zholes_size[ZONE_DMA] = mem_data[node].max_pfn -
- mem_data[node].min_pfn -
- mem_data[node].num_dma_physpages;
- } else {
- /* This node has memory in both zones */
- zones_size[ZONE_DMA] = max_dma -
- mem_data[node].min_pfn;
- zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] -
- mem_data[node].num_dma_physpages;
- zones_size[ZONE_NORMAL] = mem_data[node].max_pfn -
- max_dma;
- zholes_size[ZONE_NORMAL] = zones_size[ZONE_NORMAL] -
- (mem_data[node].num_physpages -
- mem_data[node].num_dma_physpages);
- }
-
pfn_offset = mem_data[node].min_pfn;
#ifdef CONFIG_VIRTUAL_MEM_MAP
NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
#endif
- free_area_init_node(node, NODE_DATA(node), zones_size,
- pfn_offset, zholes_size);
+ if (mem_data[node].max_pfn > max_pfn)
+ max_pfn = mem_data[node].max_pfn;
}
+ max_zone_pfns[ZONE_DMA] = max_dma;
+ max_zone_pfns[ZONE_NORMAL] = max_pfn;
+ free_area_init_nodes(max_zone_pfns);
+
zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
}
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 30617cc..ff87a5c 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -593,6 +593,18 @@
last_end = end;
return 0;
}
+
+int __init
+register_active_ranges(u64 start, u64 end, void *nid)
+{
+ BUG_ON(nid == NULL);
+ BUG_ON(*(unsigned long *)nid >= MAX_NUMNODES);
+
+ add_active_range(*(unsigned long *)nid,
+ __pa(start) >> PAGE_SHIFT,
+ __pa(end) >> PAGE_SHIFT);
+ return 0;
+}
#endif /* CONFIG_VIRTUAL_MEM_MAP */
static int __init
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 60b45e7..15c7c67 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -562,7 +562,8 @@
void
pcibios_disable_device (struct pci_dev *dev)
{
- acpi_pci_irq_disable(dev);
+ if (dev->is_enabled)
+ acpi_pci_irq_disable(dev);
}
void
diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c
index 27dee45..7f73ad4 100644
--- a/arch/ia64/sn/kernel/bte.c
+++ b/arch/ia64/sn/kernel/bte.c
@@ -277,8 +277,7 @@
}
/* temporary buffer used during unaligned transfers */
- bteBlock_unaligned = kmalloc(len + 3 * L1_CACHE_BYTES,
- GFP_KERNEL | GFP_DMA);
+ bteBlock_unaligned = kmalloc(len + 3 * L1_CACHE_BYTES, GFP_KERNEL);
if (bteBlock_unaligned == NULL) {
return BTEFAIL_NOTAVAIL;
}
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 330f6ab..30750c5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -126,7 +126,7 @@
select IRQ_CPU
select IRQ_CPU_RM7K
select IRQ_CPU_RM9K
- select SERIAL_RM9000
+ select MIPS_RM9122
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
@@ -203,26 +203,6 @@
<http://www.marvell.com/>. Say Y here if you wish to build a
kernel for this platform.
-config MIPS_EV96100
- bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select MIPS_GT96100
- select RM7000_CPU_SCACHE
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_R5000
- select SYS_HAS_CPU_RM7000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_BIG_ENDIAN
- help
- This is an evaluation board based on the Galileo GT-96100 LAN/WAN
- communications controllers containing a MIPS R5000 compatible core
- running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
- here if you wish to build a kernel for this platform.
-
config MIPS_IVR
bool "Globespan IVR board"
select DMA_NONCOHERENT
@@ -974,6 +954,12 @@
bool
select HAS_TXX9_SERIAL
+config MIPS_RM9122
+ bool
+ select SERIAL_RM9000
+ select GPI_RM9000
+ select WDT_RM9000
+
config PCI_MARVELL
bool
@@ -1024,6 +1010,15 @@
depends on MARKEINS
default y
+config SERIAL_RM9000
+ bool
+
+config GPI_RM9000
+ bool
+
+config WDT_RM9000
+ bool
+
#
# Unfortunately not all GT64120 systems run the chip at the same clock.
# As the user for the clock rate and try to minimize the available options.
@@ -1054,10 +1049,6 @@
depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
default n
-config MIPS_GT96100
- bool
- select MIPS_GT64120
-
config IT8172_CIR
bool
depends on MIPS_ITE8172 || MIPS_IVR
@@ -1527,6 +1518,7 @@
select CPU_MIPSR2_SRS
select MIPS_MT
select SMP
+ select SYS_SUPPORTS_SMP
help
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
@@ -1538,6 +1530,7 @@
select CPU_MIPSR2_SRS
select MIPS_MT
select SMP
+ select SYS_SUPPORTS_SMP
help
This is a kernel model which is also known a VSMP or lately
has been marketesed into SMVP.
@@ -1649,9 +1642,7 @@
default y
config IRQ_PER_CPU
- depends on SMP
bool
- default y
#
# - Highmem only makes sense for the 32-bit kernel.
@@ -1719,6 +1710,7 @@
config SMP
bool "Multi-Processing support"
depends on SYS_SUPPORTS_SMP
+ select IRQ_PER_CPU
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d333ce4..e521826 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -280,13 +280,6 @@
load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000
#
-# Galileo EV96100 Board
-#
-core-$(CONFIG_MIPS_EV96100) += arch/mips/galileo-boards/ev96100/
-cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100
-load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000
-
-#
# Wind River PPMC Board (4KC + GT64120)
#
core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/
@@ -330,6 +323,7 @@
# MIPS SEAD board
#
core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/
+cflags-$(CONFIG_MIPS_SEAD) += -Iinclude/asm-mips/mach-mips
load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
#
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
index 4c7d763..51d62bd 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -6,4 +6,3 @@
# Makefile for the Alchemy Semiconductor Db1x00 board.
lib-y := init.o board_setup.o irqmap.o
-obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
deleted file mode 100644
index 0942dcf..0000000
--- a/arch/mips/au1000/db1x00/mirage_ts.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/mips/au1000/db1x00/mirage_ts.c
- *
- * BRIEF MODULE DESCRIPTION
- * Glue between Mirage board-specific touchscreen pieces
- * and generic Wolfson Codec touchscreen support.
- *
- * Based on pb1100_ts.c used in Hydrogen II.
- *
- * Copyright (c) 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/wait.h>
-
-#include <asm/segment.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/delay.h>
-#include <asm/au1000.h>
-
-/*
- * Imported interface to Wolfson Codec driver.
- */
-extern void *wm97xx_ts_get_handle(int which);
-extern int wm97xx_ts_ready(void* ts_handle);
-extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans);
-extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg);
-extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val);
-extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure);
-extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z);
-
-int wm97xx_comodule_present = 1;
-
-
-#define TS_NAME "mirage_ts"
-
-#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
-#define DPRINTK(format, arg...) printk("%s: " format "\n", __FUNCTION__ , ## arg)
-
-
-#define PEN_DOWN_IRQ AU1000_GPIO_7
-
-static struct task_struct *ts_task = 0;
-static DECLARE_COMPLETION(ts_complete);
-static DECLARE_WAIT_QUEUE_HEAD(pendown_wait);
-
-#ifdef CONFIG_WM97XX_FIVEWIRETS
-static int release_pressure = 1;
-#else
-static int release_pressure = 50;
-#endif
-
-typedef struct {
- long x;
- long y;
-} DOWN_EVENT;
-
-#define SAMPLE_RATE 50 /* samples per second */
-#define PEN_DEBOUNCE 5 /* samples for settling - fn of SAMPLE_RATE */
-#define PEN_UP_TIMEOUT 10 /* in seconds */
-#define PEN_UP_SETTLE 5 /* samples per second */
-
-static struct {
- int xscale;
- int xtrans;
- int yscale;
- int ytrans;
-} mirage_ts_cal =
-{
-#if 0
- .xscale = 84,
- .xtrans = -157,
- .yscale = 66,
- .ytrans = -150,
-#else
- .xscale = 84,
- .xtrans = -150,
- .yscale = 66,
- .ytrans = -146,
-#endif
-};
-
-
-static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs)
-{
-//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD));
- wake_up(&pendown_wait);
-}
-
-static int ts_thread(void *id)
-{
- static int pen_was_down = 0;
- static DOWN_EVENT pen_xy;
- long x, y, z;
- void *ts; /* handle */
- struct task_struct *tsk = current;
- int timeout = HZ / SAMPLE_RATE;
-
- ts_task = tsk;
-
- daemonize();
- tsk->tty = NULL;
- tsk->policy = SCHED_FIFO;
- tsk->rt_priority = 1;
- strcpy(tsk->comm, "touchscreen");
-
- /* only want to receive SIGKILL */
- spin_lock_irq(&tsk->sigmask_lock);
- siginitsetinv(&tsk->blocked, sigmask(SIGKILL));
- recalc_sigpending(tsk);
- spin_unlock_irq(&tsk->sigmask_lock);
-
- /* get handle for codec */
- ts = wm97xx_ts_get_handle(0);
-
- /* proceed only after everybody is ready */
- wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4);
-
- /* board-specific calibration */
- wm97xx_ts_set_cal(ts,
- mirage_ts_cal.xscale,
- mirage_ts_cal.xtrans,
- mirage_ts_cal.yscale,
- mirage_ts_cal.ytrans);
-
- /* route Wolfson pendown interrupts to our GPIO */
- au_sync();
- wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008);
- au_sync();
- wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008);
- au_sync();
- wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008);
- au_sync();
-
- for (;;) {
- interruptible_sleep_on_timeout(&pendown_wait, timeout);
- disable_irq(PEN_DOWN_IRQ);
- if (signal_pending(tsk)) {
- break;
- }
-
- /* read codec */
- if (!wm97xx_ts_read_data(ts, &x, &y, &z))
- z = 0; /* treat no-data and pen-up the same */
-
- if (signal_pending(tsk)) {
- break;
- }
-
- if (z >= release_pressure) {
- y = ~y; /* top to bottom */
- if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX
- /* bounce ? */
- x = pen_xy.x;
- y = pen_xy.y;
- --pen_was_down;
- } else if (pen_was_down <= 1) {
- pen_xy.x = x;
- pen_xy.y = y;
- if (pen_was_down)
- wm97xx_ts_send_data(ts, x, y, z);
- pen_was_down = PEN_DEBOUNCE;
- }
- //wm97xx_ts_send_data(ts, x, y, z);
- timeout = HZ / SAMPLE_RATE;
- } else {
- if (pen_was_down) {
- if (--pen_was_down)
- z = release_pressure;
- else //THXXX
- wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z);
- }
- /* The pendown signal takes some time to settle after
- * reading the pen pressure so wait a little
- * before enabling the pen.
- */
- if (! pen_was_down) {
-// interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE);
- timeout = HZ * PEN_UP_TIMEOUT;
- }
- }
- enable_irq(PEN_DOWN_IRQ);
- }
- enable_irq(PEN_DOWN_IRQ);
- ts_task = NULL;
- complete(&ts_complete);
- return 0;
-}
-
-static int __init ts_mirage_init(void)
-{
- int ret;
-
- /* pen down signal is connected to GPIO 7 */
-
- ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL);
- if (ret) {
- err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret);
- return ret;
- }
-
- lock_kernel();
- ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES);
- if (ret < 0) {
- unlock_kernel();
- return ret;
- }
- unlock_kernel();
-
- info("Mirage touchscreen IRQ initialized.");
-
- return 0;
-}
-
-static void __exit ts_mirage_exit(void)
-{
- if (ts_task) {
- send_sig(SIGKILL, ts_task, 1);
- wait_for_completion(&ts_complete);
- }
-
- free_irq(PEN_DOWN_IRQ, NULL);
-}
-
-module_init(ts_mirage_init);
-module_exit(ts_mirage_exit);
-
diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c
index bbb4ea4..cc1ce77 100644
--- a/arch/mips/basler/excite/excite_device.c
+++ b/arch/mips/basler/excite/excite_device.c
@@ -68,7 +68,7 @@
static struct resource
- excite_ctr_resource = {
+ excite_ctr_resource __attribute__((unused)) = {
.name = "GPI counters",
.start = 0,
.end = 5,
@@ -77,7 +77,7 @@
.sibling = NULL,
.child = NULL
},
- excite_gpislice_resource = {
+ excite_gpislice_resource __attribute__((unused)) = {
.name = "GPI slices",
.start = 0,
.end = 1,
@@ -86,7 +86,7 @@
.sibling = NULL,
.child = NULL
},
- excite_mdio_channel_resource = {
+ excite_mdio_channel_resource __attribute__((unused)) = {
.name = "MDIO channels",
.start = 0,
.end = 1,
@@ -95,7 +95,7 @@
.sibling = NULL,
.child = NULL
},
- excite_fifomem_resource = {
+ excite_fifomem_resource __attribute__((unused)) = {
.name = "FIFO memory",
.start = 0,
.end = 767,
@@ -104,7 +104,7 @@
.sibling = NULL,
.child = NULL
},
- excite_scram_resource = {
+ excite_scram_resource __attribute__((unused)) = {
.name = "Scratch RAM",
.start = EXCITE_PHYS_SCRAM,
.end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
@@ -113,7 +113,7 @@
.sibling = NULL,
.child = NULL
},
- excite_fpga_resource = {
+ excite_fpga_resource __attribute__((unused)) = {
.name = "System FPGA",
.start = EXCITE_PHYS_FPGA,
.end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
@@ -122,7 +122,7 @@
.sibling = NULL,
.child = NULL
},
- excite_nand_resource = {
+ excite_nand_resource __attribute__((unused)) = {
.name = "NAND flash control",
.start = EXCITE_PHYS_NAND,
.end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
@@ -131,7 +131,7 @@
.sibling = NULL,
.child = NULL
},
- excite_titan_resource = {
+ excite_titan_resource __attribute__((unused)) = {
.name = "TITAN registers",
.start = EXCITE_PHYS_TITAN,
.end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 5427406..d370528 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -1193,7 +1192,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 887fd95..e12a475 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index a01344f..bfade9a 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index c956824..4baf2ff 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -25,7 +25,6 @@
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -828,7 +827,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index c2f33d3..93cca15 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 8c44d16..ffd9925 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index c13768e..63eac5e 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 8aea73f..25a095f 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 90ccb73..dda469c 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index b598cf0..fcd3dd1 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 597150b..8683e0d 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index fa2996b..4ace61c 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul 6 10:04:02 2006
+# Linux kernel version: 2.6.18-rc2
+# Tue Jul 25 23:15:03 2006
#
CONFIG_MIPS=y
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -227,7 +226,6 @@
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
@@ -254,7 +252,6 @@
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -284,6 +281,7 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -643,6 +641,7 @@
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -650,7 +649,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M"
+CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
#
# Security options
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index 375b2ac..5847c91 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index b0afc11..bc4c4f1 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
CONFIG_MIPS_EV64120=y
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig
deleted file mode 100644
index 0bdc10f..0000000
--- a/arch/mips/configs/ev96100_defconfig
+++ /dev/null
@@ -1,850 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul 6 10:04:05 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-CONFIG_MIPS_EV96100=y
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_GT64120=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_GT96100=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-CONFIG_CPU_RM7000=y
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MIPS_GT96100ETH=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 045ebd0..eb87cbb 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -26,7 +26,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index ef16d1f..cc9b24e 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -1013,7 +1012,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 4bf1ee7..50092ba 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -900,7 +899,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index f83dc09..dec2ba6 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
index a91d72a..37f9dd7 100644
--- a/arch/mips/configs/it8172_defconfig
+++ b/arch/mips/configs/it8172_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
CONFIG_MIPS_ITE8172=y
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
index cebc672..18874a4 100644
--- a/arch/mips/configs/ivr_defconfig
+++ b/arch/mips/configs/ivr_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
CONFIG_MIPS_IVR=y
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 5d9eb11..9f1e304 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -731,7 +730,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index be45a90..fded3f7 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index 64dc9f4..320b8cd 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -905,7 +904,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 2690baf..0ba1ef5 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -1230,7 +1229,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index c298979..adbeead 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 938b38a..79fd544 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul 6 10:04:15 2006
+# Linux kernel version: 2.6.18-rc2
+# Tue Jul 25 23:16:46 2006
#
CONFIG_MIPS=y
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -71,7 +70,6 @@
CONFIG_VICTOR_MPC30X=y
# CONFIG_ZAO_CAPCELLA is not set
CONFIG_PCI_VR41XX=y
-CONFIG_VRC4173=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -168,6 +166,7 @@
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
@@ -841,7 +840,7 @@
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
@@ -982,7 +981,6 @@
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -1007,6 +1005,7 @@
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1014,7 +1013,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="mem=32M console=ttyVR0,19200"
+CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
#
# Security options
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index ec5758f..4d87da2 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index 0d33d87..a7ac2b0 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -774,7 +773,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index 4b99910..853e7bb 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -723,7 +722,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index 827b344..8524efa 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -777,7 +776,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 9ed60fe..1a16e92 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 6774254b..9ea8ede 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 1afe5bf..c4a1589 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index ac616c8..1cbf270 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
index a8eb51b..bec30b1 100644
--- a/arch/mips/configs/pnx8550-v2pci_defconfig
+++ b/arch/mips/configs/pnx8550-v2pci_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index 6a63a11..f5f799e 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -687,7 +686,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index 6779f44..2f56502 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index b7826d3..4fee90b 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -1442,7 +1441,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 625c1c6..9041f09 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index 4401b60..02abb2f 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 2ba4e25..ca3d0c4 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index fc8a407..4e2009a 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index effcb63..535a813 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 4891d02..3a3ef20 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul 6 10:04:21 2006
+# Linux kernel version: 2.6.18-rc2
+# Tue Jul 25 23:13:04 2006
#
CONFIG_MIPS=y
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -166,6 +165,7 @@
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
@@ -379,6 +379,7 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -855,7 +856,6 @@
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@@ -880,6 +880,7 @@
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -887,7 +888,7 @@
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_FS is not set
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M"
+CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
#
# Security options
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 3e4b16b..e6b1dea 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 3a68d8a..06a072b 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index fff6fcc..cc9b24e 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-rc1
-# Thu Jul 6 09:49:33 2006
+# Thu Jul 6 10:04:10 2006
#
CONFIG_MIPS=y
@@ -25,7 +25,6 @@
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MACH_JAZZ is not set
@@ -1013,7 +1012,7 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
diff --git a/arch/mips/galileo-boards/ev96100/Makefile b/arch/mips/galileo-boards/ev96100/Makefile
deleted file mode 100644
index cd868ec..0000000
--- a/arch/mips/galileo-boards/ev96100/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
-#
-# Makefile for the Galileo EV96100 board.
-#
-
-obj-y += init.o irq.o puts.o reset.o time.o setup.o
diff --git a/arch/mips/galileo-boards/ev96100/init.c b/arch/mips/galileo-boards/ev96100/init.c
deleted file mode 100644
index a01fe9b..0000000
--- a/arch/mips/galileo-boards/ev96100/init.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/generic/generic.c
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/gt64120.h>
-
-
-/* Environment variable */
-
-typedef struct {
- char *name;
- char *val;
-} t_env_var;
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-
-int init_debug = 0;
-
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
-unsigned long __init prom_free_prom_memory(void)
-{
- return 0;
-}
-
-void __init prom_init_cmdline(void)
-{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
-
- cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
- strcpy(cp, prom_argv[actr]);
- cp += strlen(prom_argv[actr]);
- *cp++ = ' ';
- actr++;
- }
- if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
- --cp;
- *cp = '\0';
-}
-
-char *prom_getenv(char *envname)
-{
- /*
- * Return a pointer to the given environment variable.
- */
-
- t_env_var *env = (t_env_var *) prom_envp;
- int i;
-
- i = strlen(envname);
-
- while (env->name) {
- if (strncmp(envname, env->name, i) == 0) {
- return (env->val);
- }
- env++;
- }
- return (NULL);
-}
-
-static inline unsigned char str2hexnum(unsigned char c)
-{
- if (c >= '0' && c <= '9')
- return c - '0';
- if (c >= 'a' && c <= 'f')
- return c - 'a' + 10;
- return 0; /* foo */
-}
-
-static inline void str2eaddr(unsigned char *ea, unsigned char *str)
-{
- int i;
-
- for (i = 0; i < 6; i++) {
- unsigned char num;
-
- if ((*str == '.') || (*str == ':'))
- str++;
- num = str2hexnum(*str++) << 4;
- num |= (str2hexnum(*str++));
- ea[i] = num;
- }
-}
-
-int get_ethernet_addr(char *ethernet_addr)
-{
- char *ethaddr_str;
-
- ethaddr_str = prom_getenv("ethaddr");
- if (!ethaddr_str) {
- printk("ethaddr not set in boot prom\n");
- return -1;
- }
- str2eaddr(ethernet_addr, ethaddr_str);
-
- if (init_debug > 1) {
- int i;
- printk("get_ethernet_addr: ");
- for (i = 0; i < 5; i++)
- printk("%02x:",
- (unsigned char) *(ethernet_addr + i));
- printk("%02x\n", *(ethernet_addr + i));
- }
-
- return 0;
-}
-
-const char *get_system_type(void)
-{
- return "Galileo EV96100";
-}
-
-void __init prom_init(void)
-{
- volatile unsigned char *uart;
- char ppbuf[8];
-
- prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
-
- mips_machgroup = MACH_GROUP_GALILEO;
- mips_machtype = MACH_EV96100;
-
- prom_init_cmdline();
-
- /* 32 MB upgradable */
- add_memory_region(0, 32 << 20, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c
deleted file mode 100644
index ee5d672..0000000
--- a/arch/mips/galileo-boards/ev96100/irq.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/atlas/atlas_int.c.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <asm/irq_cpu.h>
-
-static inline unsigned int ffz8(unsigned int word)
-{
- unsigned long k;
-
- k = 7;
- if (word & 0x0fUL) { k -= 4; word <<= 4; }
- if (word & 0x30UL) { k -= 2; word <<= 2; }
- if (word & 0x40UL) { k -= 1; }
-
- return k;
-}
-
-extern void mips_timer_interrupt(struct pt_regs *regs);
-
-asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs)
-{
- do_IRQ(ffz8(pending >> 8), regs);
-}
-
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
-{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
- if (pending & CAUSEF_IP7)
- mips_timer_interrupt(regs);
- else if (pending)
- ev96100_cpu_irq(pending, regs);
- else
- spurious_interrupt(regs);
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init(0);
-}
diff --git a/arch/mips/galileo-boards/ev96100/puts.c b/arch/mips/galileo-boards/ev96100/puts.c
deleted file mode 100644
index 49dc6d1..0000000
--- a/arch/mips/galileo-boards/ev96100/puts.c
+++ /dev/null
@@ -1,138 +0,0 @@
-
-/*
- * Debug routines which directly access the uart.
- */
-
-#include <linux/types.h>
-#include <asm/gt64120.h>
-
-
-//#define SERIAL_BASE EV96100_UART0_REGS_BASE
-#define SERIAL_BASE 0xBD000020
-#define NS16550_BASE SERIAL_BASE
-
-#define SERA_CMD 0x0D
-#define SERA_DATA 0x08
-//#define SERB_CMD 0x05
-#define SERB_CMD 20
-#define SERB_DATA 0x00
-#define TX_BUSY 0x20
-
-#define TIMEOUT 0xffff
-#undef SLOW_DOWN
-
-static const char digits[16] = "0123456789abcdef";
-static volatile unsigned char *const com1 = (unsigned char *) SERIAL_BASE;
-
-
-#ifdef SLOW_DOWN
-static inline void slow_down()
-{
- int k;
- for (k = 0; k < 10000; k++);
-}
-#else
-#define slow_down()
-#endif
-
-void putch(const unsigned char c)
-{
- unsigned char ch;
- int i = 0;
-
- do {
- ch = com1[SERB_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SERB_DATA] = c;
-}
-
-void putchar(const unsigned char c)
-{
- unsigned char ch;
- int i = 0;
-
- do {
- ch = com1[SERB_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SERB_DATA] = c;
-}
-
-void puts(unsigned char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
- do {
- ch = com1[SERB_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SERB_DATA] = *cp++;
- }
- putch('\r');
- putch('\n');
-}
-
-void fputs(unsigned char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
-
- do {
- ch = com1[SERB_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SERB_DATA] = *cp++;
- }
-}
-
-
-void put64(uint64_t ul)
-{
- int cnt;
- unsigned ch;
-
- cnt = 16; /* 16 nibbles in a 64 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char) (ul >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
-
-void put32(unsigned u)
-{
- int cnt;
- unsigned ch;
-
- cnt = 8; /* 8 nibbles in a 32 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char) (u >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
diff --git a/arch/mips/galileo-boards/ev96100/reset.c b/arch/mips/galileo-boards/ev96100/reset.c
deleted file mode 100644
index 5ef9b7f..0000000
--- a/arch/mips/galileo-boards/ev96100/reset.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Galileo EV96100 reset routines.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/generic/reset.c
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/gt64120.h>
-
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
-static void mips_machine_restart(char *command)
-{
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
- while (1);
-}
-
-static void mips_machine_halt(void)
-{
- printk(KERN_NOTICE "You can safely turn off the power\n");
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-void mips_reboot_setup(void)
-{
- _machine_restart = mips_machine_restart;
- _machine_halt = mips_machine_halt;
-}
diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c
deleted file mode 100644
index 639ad55..0000000
--- a/arch/mips/galileo-boards/ev96100/setup.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Galileo EV96100 setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/atlas/atlas_setup.c.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/pci.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/gt64120.h>
-#include <asm/galileo-boards/ev96100int.h>
-
-
-extern char *__init prom_getcmdline(void);
-
-extern void mips_reboot_setup(void);
-
-unsigned char mac_0_1[12];
-
-void __init plat_mem_setup(void)
-{
- unsigned int config = read_c0_config();
- unsigned int status = read_c0_status();
- unsigned int info = read_c0_info();
- u32 tmp;
-
- char *argptr;
-
- clear_c0_status(ST0_FR);
-
- if (config & 0x8)
- printk("Secondary cache is enabled\n");
- else
- printk("Secondary cache is disabled\n");
-
- if (status & (1 << 27))
- printk("User-mode cache ops enabled\n");
- else
- printk("User-mode cache ops disabled\n");
-
- printk("CP0 info reg: %x\n", (unsigned) info);
- if (info & (1 << 28))
- printk("burst mode Scache RAMS\n");
- else
- printk("pipelined Scache RAMS\n");
-
- if (info & 0x1)
- printk("Atomic Enable is set\n");
-
- argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_CONSOLE
- if (strstr(argptr, "console=") == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-
- mips_reboot_setup();
-
- set_io_port_base(KSEG1);
- ioport_resource.start = GT_PCI_IO_BASE;
- ioport_resource.end = GT_PCI_IO_BASE + 0x01ffffff;
-
-#ifdef CONFIG_BLK_DEV_INITRD
- ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
-#endif
-
-
- /*
- * Setup GT controller master bit so we can do config cycles
- */
-
- /* Clear cause register bits */
- GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
- GT_INTRCAUSE_TARABORT0_BIT));
- /* Setup address */
- GT_WRITE(GT_PCI0_CFGADDR_OFS,
- (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) |
- (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
- ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) |
- GT_PCI0_CFGADDR_CONFIGEN_BIT);
-
- udelay(2);
- tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
-
- tmp |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
- GT_WRITE(GT_PCI0_CFGADDR_OFS,
- (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) |
- (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
- ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) |
- GT_PCI0_CFGADDR_CONFIGEN_BIT);
- udelay(2);
- GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp);
-
- /* Setup address */
- GT_WRITE(GT_PCI0_CFGADDR_OFS,
- (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) |
- (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
- ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) |
- GT_PCI0_CFGADDR_CONFIGEN_BIT);
-
- udelay(2);
- tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
-}
-
-unsigned short get_gt_devid(void)
-{
- u32 gt_devid;
-
- /* Figure out if this is a gt96100 or gt96100A */
- GT_WRITE(GT_PCI0_CFGADDR_OFS,
- (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) |
- (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
- ((PCI_VENDOR_ID / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) |
- GT_PCI0_CFGADDR_CONFIGEN_BIT);
-
- udelay(4);
- gt_devid = GT_READ(GT_PCI0_CFGDATA_OFS);
-
- return gt_devid >> 16;
-}
diff --git a/arch/mips/galileo-boards/ev96100/time.c b/arch/mips/galileo-boards/ev96100/time.c
deleted file mode 100644
index 8cbe842..0000000
--- a/arch/mips/galileo-boards/ev96100/time.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Galileo EV96100 rtc routines.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/atlas/atlas_rtc.c.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/timex.h>
-
-#include <asm/mipsregs.h>
-#include <asm/ptrace.h>
-#include <asm/time.h>
-
-
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-
-extern volatile unsigned long wall_jiffies;
-unsigned long missed_heart_beats = 0;
-
-static unsigned long r4k_offset; /* Amount to increment compare reg each time */
-static unsigned long r4k_cur; /* What counter should be at next timer irq */
-
-static inline void ack_r4ktimer(unsigned long newval)
-{
- write_c0_compare(newval);
-}
-
-/*
- * There are a lot of conceptually broken versions of the MIPS timer interrupt
- * handler floating around. This one is rather different, but the algorithm
- * is probably more robust.
- */
-void mips_timer_interrupt(struct pt_regs *regs)
-{
- int irq = 7; /* FIX ME */
-
- if (r4k_offset == 0) {
- goto null;
- }
-
- do {
- kstat_this_cpu.irqs[irq]++;
- do_timer(regs);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(regs));
-#endif
- r4k_cur += r4k_offset;
- ack_r4ktimer(r4k_cur);
-
- } while (((unsigned long)read_c0_count()
- - r4k_cur) < 0x7fffffff);
- return;
-
-null:
- ack_r4ktimer(0);
-}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index aa2caa6..9fbf843 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -38,15 +38,40 @@
static void r39xx_wait(void)
{
- unsigned long cfg = read_c0_conf();
- write_c0_conf(cfg | TX39_CONF_HALT);
+ local_irq_disable();
+ if (!need_resched())
+ write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
+ local_irq_enable();
}
+/*
+ * There is a race when WAIT instruction executed with interrupt
+ * enabled.
+ * But it is implementation-dependent wheter the pipelie restarts when
+ * a non-enabled interrupt is requested.
+ */
static void r4k_wait(void)
{
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
+ __asm__(" .set mips3 \n"
+ " wait \n"
+ " .set mips0 \n");
+}
+
+/*
+ * This variant is preferable as it allows testing need_resched and going to
+ * sleep depending on the outcome atomically. Unfortunately the "It is
+ * implementation-dependent whether the pipeline restarts when a non-enabled
+ * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
+ * using this version a gamble.
+ */
+static void r4k_wait_irqoff(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ __asm__(" .set mips3 \n"
+ " wait \n"
+ " .set mips0 \n");
+ local_irq_enable();
}
/* The Au1xxx wait is available only if using 32khz counter or
@@ -56,17 +81,17 @@
static void au1k_wait(void)
{
/* using the wait instruction makes CP0 counter unusable */
- __asm__(".set mips3\n\t"
- "cache 0x14, 0(%0)\n\t"
- "cache 0x14, 32(%0)\n\t"
- "sync\n\t"
- "nop\n\t"
- "wait\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- ".set mips0\n\t"
+ __asm__(" .set mips3 \n"
+ " cache 0x14, 0(%0) \n"
+ " cache 0x14, 32(%0) \n"
+ " sync \n"
+ " nop \n"
+ " wait \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " .set mips0 \n"
: : "r" (au1k_wait));
}
@@ -111,7 +136,6 @@
case CPU_NEVADA:
case CPU_RM7000:
case CPU_RM9000:
- case CPU_TX49XX:
case CPU_4KC:
case CPU_4KEC:
case CPU_4KSC:
@@ -125,6 +149,10 @@
cpu_wait = r4k_wait;
printk(" available.\n");
break;
+ case CPU_TX49XX:
+ cpu_wait = r4k_wait_irqoff;
+ printk(" available.\n");
+ break;
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index 676e868..2132485 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -17,6 +17,7 @@
#include <asm/ptrace.h>
#include <asm/uaccess.h>
+#include <asm/unistd.h>
#undef DEBUG_SIG
@@ -172,11 +173,12 @@
return ret;
}
-asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
+void do_irix_signal(struct pt_regs *regs)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
+ sigset_t *oldset;
/*
* We want the common case to go fast, which is why we may in certain
@@ -184,19 +186,28 @@
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
- if (try_to_freeze())
- goto no_signal;
-
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0)
- return handle_signal(signr, &info, &ka, oldset, regs);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
-no_signal:
+ return;
+ }
+
/*
* Who's code doesn't conform to the restartable syscall convention
* dies here!!! The li instruction, a single machine instruction,
@@ -208,8 +219,22 @@
regs->regs[2] == ERESTARTNOINTR) {
regs->cp0_epc -= 8;
}
+ if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
+ regs->regs[2] = __NR_restart_syscall;
+ regs->regs[7] = regs->regs[26];
+ regs->cp0_epc -= 4;
+ }
+ regs->regs[0] = 0; /* Don't deal with this again. */
}
- return 0;
+
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
asmlinkage void
@@ -298,6 +323,9 @@
int _unused0[2];
};
+#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility:
+ set only the low 32 bit of the sigset. */
+
#ifdef DEBUG_SIG
static inline void dump_sigact_irix5(struct sigact_irix5 *p)
{
@@ -413,7 +441,7 @@
asmlinkage int irix_sigsuspend(struct pt_regs *regs)
{
- sigset_t saveset, newset;
+ sigset_t newset;
sigset_t __user *uset;
uset = (sigset_t __user *) regs->regs[4];
@@ -422,18 +450,15 @@
sigdelsetmask(&newset, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
current->blocked = newset;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs->regs[2] = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_irix_signal(&saveset, regs))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
/* hate hate hate... */
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 450ac59..43b1162 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -991,7 +991,7 @@
unsigned int __unused[4];
};
-#ifdef CONFIG_SYSCTL
+#ifdef CONFIG_SYSCTL_SYSCALL
asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
{
@@ -1032,7 +1032,7 @@
return error;
}
-#endif /* CONFIG_SYSCTL */
+#endif /* CONFIG_SYSCTL_SYSCALL */
asmlinkage long sys32_newuname(struct new_utsname __user * name)
{
@@ -1296,9 +1296,3 @@
return do_fork(clone_flags, newsp, ®s, 0,
parent_tidptr, child_tidptr);
}
-
-extern asmlinkage void sys_set_thread_area(u32 addr);
-asmlinkage void sys32_set_thread_area(u32 addr)
-{
- sys_set_thread_area(AA(addr));
-}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 7ab67f7..2613a0d 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -273,104 +273,107 @@
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
}
-static struct mips_frame_info {
- void *func;
- unsigned long func_size;
- int frame_size;
- int pc_offset;
-} *schedule_frame, mfinfo[64];
-static int mfinfo_num;
+/*
+ *
+ */
+struct mips_frame_info {
+ void *func;
+ unsigned long func_size;
+ int frame_size;
+ int pc_offset;
+};
-static int __init get_frame_info(struct mips_frame_info *info)
+static inline int is_ra_save_ins(union mips_instruction *ip)
{
- int i;
- void *func = info->func;
- union mips_instruction *ip = (union mips_instruction *)func;
- info->pc_offset = -1;
- info->frame_size = 0;
- for (i = 0; i < 128; i++, ip++) {
- /* if jal, jalr, jr, stop. */
- if (ip->j_format.opcode == jal_op ||
- (ip->r_format.opcode == spec_op &&
- (ip->r_format.func == jalr_op ||
- ip->r_format.func == jr_op)))
- break;
+ /* sw / sd $ra, offset($sp) */
+ return (ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op) &&
+ ip->i_format.rs == 29 &&
+ ip->i_format.rt == 31;
+}
- if (info->func_size && i >= info->func_size / 4)
- break;
- if (
-#ifdef CONFIG_32BIT
- ip->i_format.opcode == addiu_op &&
-#endif
-#ifdef CONFIG_64BIT
- ip->i_format.opcode == daddiu_op &&
-#endif
- ip->i_format.rs == 29 &&
- ip->i_format.rt == 29) {
- /* addiu/daddiu sp,sp,-imm */
- if (info->frame_size)
- continue;
- info->frame_size = - ip->i_format.simmediate;
- }
+static inline int is_jal_jalr_jr_ins(union mips_instruction *ip)
+{
+ if (ip->j_format.opcode == jal_op)
+ return 1;
+ if (ip->r_format.opcode != spec_op)
+ return 0;
+ return ip->r_format.func == jalr_op || ip->r_format.func == jr_op;
+}
- if (
-#ifdef CONFIG_32BIT
- ip->i_format.opcode == sw_op &&
-#endif
-#ifdef CONFIG_64BIT
- ip->i_format.opcode == sd_op &&
-#endif
- ip->i_format.rs == 29 &&
- ip->i_format.rt == 31) {
- /* sw / sd $ra, offset($sp) */
- if (info->pc_offset != -1)
- continue;
- info->pc_offset =
- ip->i_format.simmediate / sizeof(long);
- }
- }
- if (info->pc_offset == -1 || info->frame_size == 0) {
- if (func == schedule)
- printk("Can't analyze prologue code at %p\n", func);
- info->pc_offset = -1;
- info->frame_size = 0;
- }
-
+static inline int is_sp_move_ins(union mips_instruction *ip)
+{
+ /* addiu/daddiu sp,sp,-imm */
+ if (ip->i_format.rs != 29 || ip->i_format.rt != 29)
+ return 0;
+ if (ip->i_format.opcode == addiu_op || ip->i_format.opcode == daddiu_op)
+ return 1;
return 0;
}
+static int get_frame_info(struct mips_frame_info *info)
+{
+ union mips_instruction *ip = info->func;
+ unsigned max_insns = info->func_size / sizeof(union mips_instruction);
+ unsigned i;
+
+ info->pc_offset = -1;
+ info->frame_size = 0;
+
+ if (!ip)
+ goto err;
+
+ if (max_insns == 0)
+ max_insns = 128U; /* unknown function size */
+ max_insns = min(128U, max_insns);
+
+ for (i = 0; i < max_insns; i++, ip++) {
+
+ if (is_jal_jalr_jr_ins(ip))
+ break;
+ if (!info->frame_size) {
+ if (is_sp_move_ins(ip))
+ info->frame_size = - ip->i_format.simmediate;
+ continue;
+ }
+ if (info->pc_offset == -1 && is_ra_save_ins(ip)) {
+ info->pc_offset =
+ ip->i_format.simmediate / sizeof(long);
+ break;
+ }
+ }
+ if (info->frame_size && info->pc_offset >= 0) /* nested */
+ return 0;
+ if (info->pc_offset < 0) /* leaf */
+ return 1;
+ /* prologue seems boggus... */
+err:
+ return -1;
+}
+
+static struct mips_frame_info schedule_mfi __read_mostly;
+
static int __init frame_info_init(void)
{
- int i;
+ unsigned long size = 0;
#ifdef CONFIG_KALLSYMS
+ unsigned long ofs;
char *modname;
char namebuf[KSYM_NAME_LEN + 1];
- unsigned long start, size, ofs;
- extern char __sched_text_start[], __sched_text_end[];
- extern char __lock_text_start[], __lock_text_end[];
- start = (unsigned long)__sched_text_start;
- for (i = 0; i < ARRAY_SIZE(mfinfo); i++) {
- if (start == (unsigned long)schedule)
- schedule_frame = &mfinfo[i];
- if (!kallsyms_lookup(start, &size, &ofs, &modname, namebuf))
- break;
- mfinfo[i].func = (void *)(start + ofs);
- mfinfo[i].func_size = size;
- start += size - ofs;
- if (start >= (unsigned long)__lock_text_end)
- break;
- if (start == (unsigned long)__sched_text_end)
- start = (unsigned long)__lock_text_start;
- }
-#else
- mfinfo[0].func = schedule;
- schedule_frame = &mfinfo[0];
+ kallsyms_lookup((unsigned long)schedule, &size, &ofs, &modname, namebuf);
#endif
- for (i = 0; i < ARRAY_SIZE(mfinfo) && mfinfo[i].func; i++)
- get_frame_info(&mfinfo[i]);
+ schedule_mfi.func = schedule;
+ schedule_mfi.func_size = size;
- mfinfo_num = i;
+ get_frame_info(&schedule_mfi);
+
+ /*
+ * Without schedule() frame info, result given by
+ * thread_saved_pc() and get_wchan() are not reliable.
+ */
+ if (schedule_mfi.pc_offset < 0)
+ printk("Can't analyze schedule() prologue at %p\n", schedule);
+
return 0;
}
@@ -386,54 +389,86 @@
/* New born processes are a special case */
if (t->reg31 == (unsigned long) ret_from_fork)
return t->reg31;
-
- if (!schedule_frame || schedule_frame->pc_offset < 0)
+ if (schedule_mfi.pc_offset < 0)
return 0;
- return ((unsigned long *)t->reg29)[schedule_frame->pc_offset];
+ return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset];
}
-/* get_wchan - a maintenance nightmare^W^Wpain in the ass ... */
-unsigned long get_wchan(struct task_struct *p)
+
+#ifdef CONFIG_KALLSYMS
+/* used by show_backtrace() */
+unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
+ unsigned long pc, unsigned long ra)
{
unsigned long stack_page;
- unsigned long pc;
-#ifdef CONFIG_KALLSYMS
- unsigned long frame;
-#endif
+ struct mips_frame_info info;
+ char *modname;
+ char namebuf[KSYM_NAME_LEN + 1];
+ unsigned long size, ofs;
+ int leaf;
- if (!p || p == current || p->state == TASK_RUNNING)
+ stack_page = (unsigned long)task_stack_page(task);
+ if (!stack_page)
return 0;
- stack_page = (unsigned long)task_stack_page(p);
- if (!stack_page || !mfinfo_num)
+ if (!kallsyms_lookup(pc, &size, &ofs, &modname, namebuf))
+ return 0;
+ /*
+ * Return ra if an exception occured at the first instruction
+ */
+ if (unlikely(ofs == 0))
+ return ra;
+
+ info.func = (void *)(pc - ofs);
+ info.func_size = ofs; /* analyze from start to ofs */
+ leaf = get_frame_info(&info);
+ if (leaf < 0)
return 0;
- pc = thread_saved_pc(p);
-#ifdef CONFIG_KALLSYMS
- if (!in_sched_functions(pc))
- return pc;
+ if (*sp < stack_page ||
+ *sp + info.frame_size > stack_page + THREAD_SIZE - 32)
+ return 0;
- frame = p->thread.reg29 + schedule_frame->frame_size;
- do {
- int i;
+ if (leaf)
+ /*
+ * For some extreme cases, get_frame_info() can
+ * consider wrongly a nested function as a leaf
+ * one. In that cases avoid to return always the
+ * same value.
+ */
+ pc = pc != ra ? ra : 0;
+ else
+ pc = ((unsigned long *)(*sp))[info.pc_offset];
- if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32)
- return 0;
-
- for (i = mfinfo_num - 1; i >= 0; i--) {
- if (pc >= (unsigned long) mfinfo[i].func)
- break;
- }
- if (i < 0)
- break;
-
- pc = ((unsigned long *)frame)[mfinfo[i].pc_offset];
- if (!mfinfo[i].frame_size)
- break;
- frame += mfinfo[i].frame_size;
- } while (in_sched_functions(pc));
+ *sp += info.frame_size;
+ return __kernel_text_address(pc) ? pc : 0;
+}
#endif
+/*
+ * get_wchan - a maintenance nightmare^W^Wpain in the ass ...
+ */
+unsigned long get_wchan(struct task_struct *task)
+{
+ unsigned long pc = 0;
+#ifdef CONFIG_KALLSYMS
+ unsigned long sp;
+#endif
+
+ if (!task || task == current || task->state == TASK_RUNNING)
+ goto out;
+ if (!task_stack_page(task))
+ goto out;
+
+ pc = thread_saved_pc(task);
+
+#ifdef CONFIG_KALLSYMS
+ sp = task->thread.reg29 + schedule_mfi.frame_size;
+
+ while (in_sched_functions(pc))
+ pc = unwind_stack(task, &sp, pc, 0);
+#endif
+
+out:
return pc;
}
-
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index ba1bcd8..e717851 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -662,6 +662,8 @@
sys sys_tee 4
sys sys_vmsplice 4
sys sys_move_pages 6
+ sys sys_set_robust_list 2
+ sys sys_get_robust_list 3
.endm
/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 939e172d..4c22d0b 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -466,3 +466,5 @@
PTR sys_tee /* 5265 */
PTR sys_vmsplice
PTR sys_move_pages
+ PTR sys_set_robust_list
+ PTR sys_get_robust_list
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 98abbc5..f25c2a2 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -247,7 +247,7 @@
PTR sys_capset
PTR sys32_rt_sigpending /* 6125 */
PTR compat_sys_rt_sigtimedwait
- PTR sys_rt_sigqueueinfo
+ PTR sys32_rt_sigqueueinfo
PTR sysn32_rt_sigsuspend
PTR sys32_sigaltstack
PTR compat_sys_utime /* 6130 */
@@ -390,5 +390,7 @@
PTR sys_splice
PTR sys_sync_file_range
PTR sys_tee
- PTR sys_vmsplice /* 6271 */
+ PTR sys_vmsplice /* 6270 */
PTR sys_move_pages
+ PTR compat_sys_set_robust_list
+ PTR compat_sys_get_robust_list
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 505c9ee..288ee4a 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -498,7 +498,7 @@
PTR sys_mknodat /* 4290 */
PTR sys_fchownat
PTR compat_sys_futimesat
- PTR compat_sys_newfstatat
+ PTR sys_newfstatat
PTR sys_unlinkat
PTR sys_renameat /* 4295 */
PTR sys_linkat
@@ -514,4 +514,6 @@
PTR sys_tee
PTR sys_vmsplice
PTR compat_sys_move_pages
+ PTR compat_sys_set_robust_list
+ PTR compat_sys_get_robust_list /* 4310 */
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 8c2b596..fdbb508 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -10,29 +10,15 @@
* Copyright (C) 1999 Silicon Graphics, Inc.
* Copyright (C) 2000 2001, 2002 Maciej W. Rozycki
*/
-#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/string.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/utsname.h>
-#include <linux/a.out.h>
#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/initrd.h>
-#include <linux/major.h>
-#include <linux/kdev_t.h>
#include <linux/root_dev.h>
#include <linux/highmem.h>
#include <linux/console.h>
-#include <linux/mmzone.h>
#include <linux/pfn.h>
#include <asm/addrspace.h>
@@ -96,6 +82,12 @@
int x = boot_mem_map.nr_map;
struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+ /* Sanity check */
+ if (start + size < start) {
+ printk("Trying to add an invalid memory region, skipped\n");
+ return;
+ }
+
/*
* Try to merge with previous entry if any. This is far less than
* perfect but is sufficient for most real world cases.
@@ -143,167 +135,132 @@
}
}
-static inline void parse_cmdline_early(void)
+/*
+ * Manage initrd
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int __init rd_start_early(char *p)
{
- char c = ' ', *to = command_line, *from = saved_command_line;
- unsigned long start_at, mem_size;
- int len = 0;
- int usermem = 0;
-
- printk("Determined physical RAM map:\n");
- print_memory_map();
-
- for (;;) {
- /*
- * "mem=XXX[kKmM]" defines a memory region from
- * 0 to <XXX>, overriding the determined size.
- * "mem=XXX[KkmM]@YYY[KkmM]" defines a memory region from
- * <YYY> to <YYY>+<XXX>, overriding the determined size.
- */
- if (c == ' ' && !memcmp(from, "mem=", 4)) {
- if (to != command_line)
- to--;
- /*
- * If a user specifies memory size, we
- * blow away any automatically generated
- * size.
- */
- if (usermem == 0) {
- boot_mem_map.nr_map = 0;
- usermem = 1;
- }
- mem_size = memparse(from + 4, &from);
- if (*from == '@')
- start_at = memparse(from + 1, &from);
- else
- start_at = 0;
- add_memory_region(start_at, mem_size, BOOT_MEM_RAM);
- }
- c = *(from++);
- if (!c)
- break;
- if (CL_SIZE <= ++len)
- break;
- *(to++) = c;
- }
- *to = '\0';
-
- if (usermem) {
- printk("User-defined physical RAM map:\n");
- print_memory_map();
- }
-}
-
-static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_end)
-{
- /*
- * "rd_start=0xNNNNNNNN" defines the memory address of an initrd
- * "rd_size=0xNN" it's size
- */
- unsigned long start = 0;
- unsigned long size = 0;
- unsigned long end;
- char cmd_line[CL_SIZE];
- char *start_str;
- char *size_str;
- char *tmp;
-
- strcpy(cmd_line, command_line);
- *command_line = 0;
- tmp = cmd_line;
- /* Ignore "rd_start=" strings in other parameters. */
- start_str = strstr(cmd_line, "rd_start=");
- if (start_str && start_str != cmd_line && *(start_str - 1) != ' ')
- start_str = strstr(start_str, " rd_start=");
- while (start_str) {
- if (start_str != cmd_line)
- strncat(command_line, tmp, start_str - tmp);
- start = memparse(start_str + 9, &start_str);
- tmp = start_str + 1;
- start_str = strstr(start_str, " rd_start=");
- }
- if (*tmp)
- strcat(command_line, tmp);
-
- strcpy(cmd_line, command_line);
- *command_line = 0;
- tmp = cmd_line;
- /* Ignore "rd_size" strings in other parameters. */
- size_str = strstr(cmd_line, "rd_size=");
- if (size_str && size_str != cmd_line && *(size_str - 1) != ' ')
- size_str = strstr(size_str, " rd_size=");
- while (size_str) {
- if (size_str != cmd_line)
- strncat(command_line, tmp, size_str - tmp);
- size = memparse(size_str + 8, &size_str);
- tmp = size_str + 1;
- size_str = strstr(size_str, " rd_size=");
- }
- if (*tmp)
- strcat(command_line, tmp);
+ unsigned long start = memparse(p, &p);
#ifdef CONFIG_64BIT
/* HACK: Guess if the sign extension was forgotten */
if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
start |= 0xffffffff00000000UL;
#endif
+ initrd_start = start;
+ initrd_end += start;
- end = start + size;
- if (start && end) {
- *rd_start = start;
- *rd_end = end;
- return 1;
- }
return 0;
}
+early_param("rd_start", rd_start_early);
-#define MAXMEM HIGHMEM_START
-#define MAXMEM_PFN PFN_DOWN(MAXMEM)
-
-static inline void bootmem_init(void)
+static int __init rd_size_early(char *p)
{
- unsigned long start_pfn;
- unsigned long reserved_end = (unsigned long)&_end;
-#ifndef CONFIG_SGI_IP27
- unsigned long first_usable_pfn;
- unsigned long bootmap_size;
- int i;
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
- int initrd_reserve_bootmem = 0;
+ initrd_end += memparse(p, &p);
- /* Board specific code should have set up initrd_start and initrd_end */
- ROOT_DEV = Root_RAM0;
- if (parse_rd_cmdline(&initrd_start, &initrd_end)) {
- reserved_end = max(reserved_end, initrd_end);
- initrd_reserve_bootmem = 1;
- } else {
- unsigned long tmp;
- u32 *initrd_header;
+ return 0;
+}
+early_param("rd_size", rd_size_early);
- tmp = ((reserved_end + PAGE_SIZE-1) & PAGE_MASK) - sizeof(u32) * 2;
- if (tmp < reserved_end)
- tmp += PAGE_SIZE;
- initrd_header = (u32 *)tmp;
- if (initrd_header[0] == 0x494E5244) {
- initrd_start = (unsigned long)&initrd_header[2];
- initrd_end = initrd_start + initrd_header[1];
- reserved_end = max(reserved_end, initrd_end);
- initrd_reserve_bootmem = 1;
- }
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
+static unsigned long __init init_initrd(void)
+{
+ unsigned long tmp, end, size;
+ u32 *initrd_header;
+
+ ROOT_DEV = Root_RAM0;
/*
- * Partially used pages are not usable - thus
- * we are rounding upwards.
+ * Board specific code or command line parser should have
+ * already set up initrd_start and initrd_end. In these cases
+ * perfom sanity checks and use them if all looks good.
*/
- start_pfn = PFN_UP(CPHYSADDR(reserved_end));
+ size = initrd_end - initrd_start;
+ if (initrd_end == 0 || size == 0) {
+ initrd_start = 0;
+ initrd_end = 0;
+ } else
+ return initrd_end;
-#ifndef CONFIG_SGI_IP27
- /* Find the highest page frame number we have available. */
- max_pfn = 0;
- first_usable_pfn = -1UL;
+ end = (unsigned long)&_end;
+ tmp = PAGE_ALIGN(end) - sizeof(u32) * 2;
+ if (tmp < end)
+ tmp += PAGE_SIZE;
+
+ initrd_header = (u32 *)tmp;
+ if (initrd_header[0] == 0x494E5244) {
+ initrd_start = (unsigned long)&initrd_header[2];
+ initrd_end = initrd_start + initrd_header[1];
+ }
+ return initrd_end;
+}
+
+static void __init finalize_initrd(void)
+{
+ unsigned long size = initrd_end - initrd_start;
+
+ if (size == 0) {
+ printk(KERN_INFO "Initrd not found or empty");
+ goto disable;
+ }
+ if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
+ printk("Initrd extends beyond end of memory");
+ goto disable;
+ }
+
+ reserve_bootmem(CPHYSADDR(initrd_start), size);
+ initrd_below_start_ok = 1;
+
+ printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
+ initrd_start, size);
+ return;
+disable:
+ printk(" - disabling initrd\n");
+ initrd_start = 0;
+ initrd_end = 0;
+}
+
+#else /* !CONFIG_BLK_DEV_INITRD */
+
+#define init_initrd() 0
+#define finalize_initrd() do {} while (0)
+
+#endif
+
+/*
+ * Initialize the bootmem allocator. It also setup initrd related data
+ * if needed.
+ */
+#ifdef CONFIG_SGI_IP27
+
+static void __init bootmem_init(void)
+{
+ init_initrd();
+ finalize_initrd();
+}
+
+#else /* !CONFIG_SGI_IP27 */
+
+static void __init bootmem_init(void)
+{
+ unsigned long reserved_end;
+ unsigned long highest = 0;
+ unsigned long mapstart = -1UL;
+ unsigned long bootmap_size;
+ int i;
+
+ /*
+ * Init any data related to initrd. It's a nop if INITRD is
+ * not selected. Once that done we can determine the low bound
+ * of usable memory.
+ */
+ reserved_end = init_initrd();
+ reserved_end = PFN_UP(CPHYSADDR(max(reserved_end, (unsigned long)&_end)));
+
+ /*
+ * Find the highest page frame number we have available.
+ */
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
@@ -312,56 +269,38 @@
start = PFN_UP(boot_mem_map.map[i].addr);
end = PFN_DOWN(boot_mem_map.map[i].addr
- + boot_mem_map.map[i].size);
+ + boot_mem_map.map[i].size);
- if (start >= end)
+ if (end > highest)
+ highest = end;
+ if (end <= reserved_end)
continue;
- if (end > max_pfn)
- max_pfn = end;
- if (start < first_usable_pfn) {
- if (start > start_pfn) {
- first_usable_pfn = start;
- } else if (end > start_pfn) {
- first_usable_pfn = start_pfn;
- }
- }
+ if (start >= mapstart)
+ continue;
+ mapstart = max(reserved_end, start);
}
/*
* Determine low and high memory ranges
*/
- max_low_pfn = max_pfn;
- if (max_low_pfn > MAXMEM_PFN) {
- max_low_pfn = MAXMEM_PFN;
-#ifndef CONFIG_HIGHMEM
- /* Maximum memory usable is what is directly addressable */
- printk(KERN_WARNING "Warning only %ldMB will be used.\n",
- MAXMEM >> 20);
- printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-#endif
- }
-
+ if (highest > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
- /*
- * Crude, we really should make a better attempt at detecting
- * highstart_pfn
- */
- highstart_pfn = highend_pfn = max_pfn;
- if (max_pfn > MAXMEM_PFN) {
- highstart_pfn = MAXMEM_PFN;
- printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
- (highend_pfn - highstart_pfn) >> (20 - PAGE_SHIFT));
- }
+ highstart_pfn = PFN_DOWN(HIGHMEM_START);
+ highend_pfn = highest;
#endif
+ highest = PFN_DOWN(HIGHMEM_START);
+ }
- /* Initialize the boot-time allocator with low memory only. */
- bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
+ /*
+ * Initialize the boot-time allocator with low memory only.
+ */
+ bootmap_size = init_bootmem(mapstart, highest);
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
- unsigned long curr_pfn, last_pfn, size;
+ unsigned long start, end, size;
/*
* Reserve usable memory.
@@ -369,85 +308,50 @@
if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
continue;
- /*
- * We are rounding up the start address of usable memory:
- */
- curr_pfn = PFN_UP(boot_mem_map.map[i].addr);
- if (curr_pfn >= max_low_pfn)
- continue;
- if (curr_pfn < start_pfn)
- curr_pfn = start_pfn;
-
- /*
- * ... and at the end of the usable range downwards:
- */
- last_pfn = PFN_DOWN(boot_mem_map.map[i].addr
+ start = PFN_UP(boot_mem_map.map[i].addr);
+ end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
-
- if (last_pfn > max_low_pfn)
- last_pfn = max_low_pfn;
+ /*
+ * We are rounding up the start address of usable memory
+ * and at the end of the usable range downwards.
+ */
+ if (start >= max_low_pfn)
+ continue;
+ if (start < reserved_end)
+ start = reserved_end;
+ if (end > max_low_pfn)
+ end = max_low_pfn;
/*
- * Only register lowmem part of lowmem segment with bootmem.
+ * ... finally, is the area going away?
*/
- size = last_pfn - curr_pfn;
- if (curr_pfn > PFN_DOWN(HIGHMEM_START))
+ if (end <= start)
continue;
- if (curr_pfn + size - 1 > PFN_DOWN(HIGHMEM_START))
- size = PFN_DOWN(HIGHMEM_START) - curr_pfn;
- if (!size)
- continue;
-
- /*
- * ... finally, did all the rounding and playing
- * around just make the area go away?
- */
- if (last_pfn <= curr_pfn)
- continue;
+ size = end - start;
/* Register lowmem ranges */
- free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
- memory_present(0, curr_pfn, curr_pfn + size - 1);
+ free_bootmem(PFN_PHYS(start), size << PAGE_SHIFT);
+ memory_present(0, start, end);
}
- /* Reserve the bootmap memory. */
- reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
-#endif /* CONFIG_SGI_IP27 */
+ /*
+ * Reserve the bootmap memory.
+ */
+ reserve_bootmem(PFN_PHYS(mapstart), bootmap_size);
-#ifdef CONFIG_BLK_DEV_INITRD
- initrd_below_start_ok = 1;
- if (initrd_start) {
- unsigned long initrd_size = ((unsigned char *)initrd_end) -
- ((unsigned char *)initrd_start);
- const int width = sizeof(long) * 2;
-
- printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
- (void *)initrd_start, initrd_size);
-
- if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
- printk("initrd extends beyond end of memory "
- "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
- width,
- (unsigned long long) CPHYSADDR(initrd_end),
- width,
- (unsigned long long) PFN_PHYS(max_low_pfn));
- initrd_start = initrd_end = 0;
- initrd_reserve_bootmem = 0;
- }
-
- if (initrd_reserve_bootmem)
- reserve_bootmem(CPHYSADDR(initrd_start), initrd_size);
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
+ /*
+ * Reserve initrd memory if needed.
+ */
+ finalize_initrd();
}
+#endif /* CONFIG_SGI_IP27 */
+
/*
* arch_mem_init - initialize memory managment subsystem
*
* o plat_mem_setup() detects the memory configuration and will record detected
* memory areas using add_memory_region.
- * o parse_cmdline_early() parses the command line for mem= options which,
- * iff detected, will override the results of the automatic detection.
*
* At this stage the memory configuration of the system is known to the
* kernel but generic memory managment system is still entirely uninitialized.
@@ -465,25 +369,59 @@
* initialization hook for anything else was introduced.
*/
-extern void plat_mem_setup(void);
+static int usermem __initdata = 0;
+
+static int __init early_parse_mem(char *p)
+{
+ unsigned long start, size;
+
+ /*
+ * If a user specifies memory size, we
+ * blow away any automatically generated
+ * size.
+ */
+ if (usermem == 0) {
+ boot_mem_map.nr_map = 0;
+ usermem = 1;
+ }
+ start = 0;
+ size = memparse(p, &p);
+ if (*p == '@')
+ start = memparse(p + 1, &p);
+
+ add_memory_region(start, size, BOOT_MEM_RAM);
+ return 0;
+}
+early_param("mem", early_parse_mem);
static void __init arch_mem_init(char **cmdline_p)
{
+ extern void plat_mem_setup(void);
+
/* call board setup routine */
plat_mem_setup();
+ printk("Determined physical RAM map:\n");
+ print_memory_map();
+
strlcpy(command_line, arcs_cmdline, sizeof(command_line));
strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
- parse_cmdline_early();
+ parse_early_param();
+
+ if (usermem) {
+ printk("User-defined physical RAM map:\n");
+ print_memory_map();
+ }
+
bootmem_init();
sparse_init();
paging_init();
}
-static inline void resource_init(void)
+static void __init resource_init(void)
{
int i;
@@ -504,10 +442,10 @@
start = boot_mem_map.map[i].addr;
end = boot_mem_map.map[i].addr + boot_mem_map.map[i].size - 1;
- if (start >= MAXMEM)
+ if (start >= HIGHMEM_START)
continue;
- if (end >= MAXMEM)
- end = MAXMEM - 1;
+ if (end >= HIGHMEM_START)
+ end = HIGHMEM_START - 1;
res = alloc_bootmem(sizeof(struct resource));
switch (boot_mem_map.map[i].type) {
@@ -536,9 +474,6 @@
}
}
-#undef MAXMEM
-#undef MAXMEM_PFN
-
void __init setup_arch(char **cmdline_p)
{
cpu_probe();
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 6b4d9be..b9d358e 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -424,15 +424,11 @@
if (!user_mode(regs))
return;
- if (try_to_freeze())
- goto no_signal;
-
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
-
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
@@ -446,9 +442,10 @@
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
+
+ return;
}
-no_signal:
/*
* Who's code doesn't conform to the restartable syscall convention
* dies here!!! The li instruction, a single machine instruction,
@@ -466,6 +463,7 @@
regs->regs[7] = regs->regs[26];
regs->cp0_epc -= 4;
}
+ regs->regs[0] = 0; /* Don't deal with this again. */
}
/*
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index f32a229..c86a5dd 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -815,9 +815,6 @@
if (!user_mode(regs))
return;
- if (try_to_freeze())
- goto no_signal;
-
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
@@ -836,9 +833,10 @@
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
+
+ return;
}
-no_signal:
/*
* Who's code doesn't conform to the restartable syscall convention
* dies here!!! The li instruction, a single machine instruction,
@@ -856,6 +854,7 @@
regs->regs[7] = regs->regs[26];
regs->cp0_epc -= 4;
}
+ regs->regs[0] = 0; /* Don't deal with this again. */
}
/*
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 93429a4..766253c 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -203,7 +203,7 @@
write_vpe_c0_config( read_c0_config());
/* make sure there are no software interrupts pending */
- write_vpe_c0_cause(read_vpe_c0_cause() & ~(C_SW1|C_SW0));
+ write_vpe_c0_cause(0);
/* Propagate Config7 */
write_vpe_c0_config7(read_c0_config7());
diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S
index 4cc3dea..76cb31d 100644
--- a/arch/mips/kernel/smtc-asm.S
+++ b/arch/mips/kernel/smtc-asm.S
@@ -8,7 +8,7 @@
#include <asm/regdef.h>
#include <asm/asmmacro.h>
#include <asm/stackframe.h>
-#include <asm/stackframe.h>
+#include <asm/irqflags.h>
/*
* "Software Interrupt" linkage.
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 0721314..9951240 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -263,7 +263,7 @@
return error;
}
-void sys_set_thread_area(unsigned long addr)
+asmlinkage int sys_set_thread_area(unsigned long addr)
{
struct thread_info *ti = task_thread_info(current);
@@ -271,6 +271,8 @@
/* If some future MIPS implementation has this register in hardware,
* we will need to update it here (and in context switches). */
+
+ return 0;
}
asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 954a198..e51d8fd 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -20,6 +20,7 @@
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
#include <linux/bootmem.h>
+#include <linux/interrupt.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
@@ -72,28 +73,68 @@
void (*board_ejtag_handler_setup)(void);
void (*board_bind_eic_interrupt)(int irq, int regset);
-/*
- * These constant is for searching for possible module text segments.
- * MODULE_RANGE is a guess of how much space is likely to be vmalloced.
- */
-#define MODULE_RANGE (8*1024*1024)
+
+static void show_raw_backtrace(unsigned long reg29)
+{
+ unsigned long *sp = (unsigned long *)reg29;
+ unsigned long addr;
+
+ printk("Call Trace:");
+#ifdef CONFIG_KALLSYMS
+ printk("\n");
+#endif
+ while (!kstack_end(sp)) {
+ addr = *sp++;
+ if (__kernel_text_address(addr))
+ print_ip_sym(addr);
+ }
+ printk("\n");
+}
+
+#ifdef CONFIG_KALLSYMS
+static int raw_show_trace;
+static int __init set_raw_show_trace(char *str)
+{
+ raw_show_trace = 1;
+ return 1;
+}
+__setup("raw_show_trace", set_raw_show_trace);
+
+extern unsigned long unwind_stack(struct task_struct *task, unsigned long *sp,
+ unsigned long pc, unsigned long ra);
+
+static void show_backtrace(struct task_struct *task, struct pt_regs *regs)
+{
+ unsigned long sp = regs->regs[29];
+ unsigned long ra = regs->regs[31];
+ unsigned long pc = regs->cp0_epc;
+
+ if (raw_show_trace || !__kernel_text_address(pc)) {
+ show_raw_backtrace(sp);
+ return;
+ }
+ printk("Call Trace:\n");
+ do {
+ print_ip_sym(pc);
+ pc = unwind_stack(task, &sp, pc, ra);
+ ra = 0;
+ } while (pc);
+ printk("\n");
+}
+#else
+#define show_backtrace(task, r) show_raw_backtrace((r)->regs[29]);
+#endif
/*
* This routine abuses get_user()/put_user() to reference pointers
* with at least a bit of error checking ...
*/
-void show_stack(struct task_struct *task, unsigned long *sp)
+static void show_stacktrace(struct task_struct *task, struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
long stackdata;
int i;
-
- if (!sp) {
- if (task && task != current)
- sp = (unsigned long *) task->thread.reg29;
- else
- sp = (unsigned long *) &sp;
- }
+ unsigned long *sp = (unsigned long *)regs->regs[29];
printk("Stack :");
i = 0;
@@ -114,32 +155,48 @@
i++;
}
printk("\n");
+ show_backtrace(task, regs);
}
-void show_trace(struct task_struct *task, unsigned long *stack)
+static __always_inline void prepare_frametrace(struct pt_regs *regs)
{
- const int field = 2 * sizeof(unsigned long);
- unsigned long addr;
-
- if (!stack) {
- if (task && task != current)
- stack = (unsigned long *) task->thread.reg29;
- else
- stack = (unsigned long *) &stack;
- }
-
- printk("Call Trace:");
-#ifdef CONFIG_KALLSYMS
- printk("\n");
+ __asm__ __volatile__(
+ ".set push\n\t"
+ ".set noat\n\t"
+#ifdef CONFIG_64BIT
+ "1: dla $1, 1b\n\t"
+ "sd $1, %0\n\t"
+ "sd $29, %1\n\t"
+ "sd $31, %2\n\t"
+#else
+ "1: la $1, 1b\n\t"
+ "sw $1, %0\n\t"
+ "sw $29, %1\n\t"
+ "sw $31, %2\n\t"
#endif
- while (!kstack_end(stack)) {
- addr = *stack++;
- if (__kernel_text_address(addr)) {
- printk(" [<%0*lx>] ", field, addr);
- print_symbol("%s\n", addr);
+ ".set pop\n\t"
+ : "=m" (regs->cp0_epc),
+ "=m" (regs->regs[29]), "=m" (regs->regs[31])
+ : : "memory");
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+ struct pt_regs regs;
+ if (sp) {
+ regs.regs[29] = (unsigned long)sp;
+ regs.regs[31] = 0;
+ regs.cp0_epc = 0;
+ } else {
+ if (task && task != current) {
+ regs.regs[29] = task->thread.reg29;
+ regs.regs[31] = 0;
+ regs.cp0_epc = task->thread.reg31;
+ } else {
+ prepare_frametrace(®s);
}
}
- printk("\n");
+ show_stacktrace(task, ®s);
}
/*
@@ -147,9 +204,15 @@
*/
void dump_stack(void)
{
- unsigned long stack;
+ struct pt_regs regs;
- show_trace(current, &stack);
+ /*
+ * Remove any garbage that may be in regs (specially func
+ * addresses) to avoid show_raw_backtrace() to report them
+ */
+ memset(®s, 0, sizeof(regs));
+ prepare_frametrace(®s);
+ show_backtrace(current, ®s);
}
EXPORT_SYMBOL(dump_stack);
@@ -268,8 +331,7 @@
print_modules();
printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n",
current->comm, current->pid, current_thread_info(), current);
- show_stack(current, (long *) regs->regs[29]);
- show_trace(current, (long *) regs->regs[29]);
+ show_stacktrace(current, regs);
show_code((unsigned int *) regs->cp0_epc);
printk("\n");
}
@@ -292,6 +354,16 @@
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
spin_unlock_irq(&die_lock);
+
+ if (in_interrupt())
+ panic("Fatal exception in interrupt");
+
+ if (panic_on_oops) {
+ printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+ ssleep(5);
+ panic("Fatal exception");
+ }
+
do_exit(SIGSEGV);
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 9ee0ec2..51ddd21 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -768,10 +768,16 @@
*/
write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor);
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
+
+ back_to_back_c0_hazard();
+
/* Set up the XTC bit in vpeconf0 to point at our tc */
write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
| (t->index << VPECONF0_XTC_SHIFT));
+ back_to_back_c0_hazard();
+
/* enable this VPE */
write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index fb25e03..a020a3c 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -1,6 +1,8 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2000, 2006 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
@@ -25,17 +27,20 @@
*/
#include <linux/compiler.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
-#include <asm/irq.h>
+#include <asm/gdb-stub.h>
#include <asm/io.h>
+#include <asm/irq_cpu.h>
+#include <asm/msc01_ic.h>
+
#include <asm/mips-boards/atlas.h>
#include <asm/mips-boards/atlasint.h>
-#include <asm/gdb-stub.h>
-
+#include <asm/mips-boards/generic.h>
static struct atlas_ictrl_regs *atlas_hw0_icregs;
@@ -47,13 +52,13 @@
void disable_atlas_irq(unsigned int irq_nr)
{
- atlas_hw0_icregs->intrsten = (1 << (irq_nr-ATLASINT_BASE));
+ atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
iob();
}
void enable_atlas_irq(unsigned int irq_nr)
{
- atlas_hw0_icregs->intseten = (1 << (irq_nr-ATLASINT_BASE));
+ atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
iob();
}
@@ -107,7 +112,7 @@
if (unlikely(int_status == 0))
return;
- irq = ATLASINT_BASE + ls1bit32(int_status);
+ irq = ATLAS_INT_BASE + ls1bit32(int_status);
DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
@@ -161,15 +166,14 @@
}
/*
- * IRQs on the Atlas board look basically (barring software IRQs which we
- * don't use at all and all external interrupt sources are combined together
- * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ * IRQs on the Atlas board look basically like (all external interrupt
+ * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
*
- * MIPS IRQ Source
+ * MIPS IRQ Source
* -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
+ * 0 Software 0 (reschedule IPI on MT)
+ * 1 Software 1 (remote call IPI on MT)
+ * 2 Combined Atlas hardware interrupt (hw0)
* 3 Hardware (ignored)
* 4 Hardware (ignored)
* 5 Hardware (ignored)
@@ -179,7 +183,7 @@
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
+ * Lowest ---- Software 0
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
@@ -193,17 +197,19 @@
if (irq == MIPSCPU_INT_ATLAS)
atlas_hw0_irqdispatch(regs);
- else if (irq > 0)
+ else if (irq >= 0)
do_IRQ(MIPSCPU_INT_BASE + irq, regs);
else
spurious_interrupt(regs);
}
-void __init arch_init_irq(void)
+static inline void init_atlas_irqs (int base)
{
int i;
- atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *));
+ atlas_hw0_icregs = (struct atlas_ictrl_regs *)
+ ioremap(ATLAS_ICTRL_REGS_BASE,
+ sizeof(struct atlas_ictrl_regs *));
/*
* Mask out all interrupt by writing "1" to all bit position in
@@ -211,7 +217,7 @@
*/
atlas_hw0_icregs->intrsten = 0xffffffff;
- for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) {
+ for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
@@ -219,3 +225,62 @@
spin_lock_init(&irq_desc[i].lock);
}
}
+
+static struct irqaction atlasirq = {
+ .handler = no_action,
+ .name = "Atlas cascade"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+ {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap) / sizeof(*msc_irqmap);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+ {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_ATLAS, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0},
+ {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
+ {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap) / sizeof(*msc_eicirqmap);
+
+void __init arch_init_irq(void)
+{
+ init_atlas_irqs(ATLAS_INT_BASE);
+
+ if (!cpu_has_veic)
+ mips_cpu_irq_init(MIPSCPU_INT_BASE);
+
+ switch(mips_revision_corid) {
+ case MIPS_REVISION_CORID_CORE_MSC:
+ case MIPS_REVISION_CORID_CORE_FPGA2:
+ case MIPS_REVISION_CORID_CORE_FPGA3:
+ case MIPS_REVISION_CORID_CORE_24K:
+ case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+ if (cpu_has_veic)
+ init_msc_irqs (MSC01E_INT_BASE,
+ msc_eicirqmap, msc_nr_eicirqs);
+ else
+ init_msc_irqs (MSC01C_INT_BASE,
+ msc_irqmap, msc_nr_irqs);
+ }
+
+
+ if (cpu_has_veic) {
+ set_vi_handler (MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
+ setup_irq (MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
+ } else if (cpu_has_vint) {
+ set_vi_handler (MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
+#ifdef CONFIG_MIPS_MT_SMTC
+ setup_irq_smtc (MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS,
+ &atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
+#else /* Not SMTC */
+ setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
+#endif /* CONFIG_MIPS_MT_SMTC */
+ } else
+ setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
+}
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
index 9871a91..0c6b0ce 100644
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ b/arch/mips/mips-boards/atlas/atlas_setup.c
@@ -77,7 +77,7 @@
#else
s.iobase = ATLAS_UART_REGS_BASE+3;
#endif
- s.irq = ATLASINT_UART;
+ s.irq = ATLAS_INT_UART;
s.uartclk = ATLAS_BASE_BAUD * 16;
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
s.iotype = UPIO_PORT;
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 557bf96..8d15861 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -41,8 +41,13 @@
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
+
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#endif
+#ifdef CONFIG_MIPS_MALTA
#include <asm/mips-boards/maltaint.h>
-#include <asm/mc146818-time.h>
+#endif
unsigned long cpu_khz;
@@ -92,10 +97,9 @@
irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
int cpu = smp_processor_id();
- int r2 = cpu_has_mips_r2;
#ifdef CONFIG_MIPS_MT_SMTC
- /*
+ /*
* In an SMTC system, one Count/Compare set exists per VPE.
* Which TC within a VPE gets the interrupt is essentially
* random - we only know that it shouldn't be one with
@@ -108,29 +112,46 @@
* the general MIPS timer_interrupt routine.
*/
+ int vpflags;
+
/*
- * DVPE is necessary so long as cross-VPE interrupts
- * are done via read-modify-write of Cause register.
+ * We could be here due to timer interrupt,
+ * perf counter overflow, or both.
*/
- int vpflags = dvpe();
- write_c0_compare (read_c0_count() - 1);
- clear_c0_cause(CPUCTR_IMASKBIT);
- evpe(vpflags);
+ if (read_c0_cause() & (1 << 26))
+ perf_irq(regs);
- if (cpu_data[cpu].vpe_id == 0) {
- timer_interrupt(irq, dev_id, regs);
- scroll_display_message();
- } else
- write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
- smtc_timer_broadcast(cpu_data[cpu].vpe_id);
-
- if (cpu != 0)
+ if (read_c0_cause() & (1 << 30)) {
+ /* If timer interrupt, make it de-assert */
+ write_c0_compare (read_c0_count() - 1);
/*
- * Other CPUs should do profiling and process accounting
+ * DVPE is necessary so long as cross-VPE interrupts
+ * are done via read-modify-write of Cause register.
*/
- local_timer_interrupt(irq, dev_id, regs);
-
+ vpflags = dvpe();
+ clear_c0_cause(CPUCTR_IMASKBIT);
+ evpe(vpflags);
+ /*
+ * There are things we only want to do once per tick
+ * in an "MP" system. One TC of each VPE will take
+ * the actual timer interrupt. The others will get
+ * timer broadcast IPIs. We use whoever it is that takes
+ * the tick on VPE 0 to run the full timer_interrupt().
+ */
+ if (cpu_data[cpu].vpe_id == 0) {
+ timer_interrupt(irq, NULL, regs);
+ smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+ scroll_display_message();
+ } else {
+ write_c0_compare(read_c0_count() +
+ (mips_hpt_frequency/HZ));
+ local_timer_interrupt(irq, dev_id, regs);
+ smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+ }
+ }
#else /* CONFIG_MIPS_MT_SMTC */
+ int r2 = cpu_has_mips_r2;
+
if (cpu == 0) {
/*
* CPU 0 handles the global timer interrupt job and process
@@ -161,9 +182,8 @@
*/
local_timer_interrupt(irq, dev_id, regs);
}
-#endif /* CONFIG_MIPS_MT_SMTC */
-
out:
+#endif /* CONFIG_MIPS_MT_SMTC */
return IRQ_HANDLED;
}
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index bb041a2..e1f35ef 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -335,7 +335,7 @@
flush_cache_mm = r3k_flush_cache_mm;
flush_cache_range = r3k_flush_cache_range;
flush_cache_page = r3k_flush_cache_page;
- flush_icache_page = r3k_flush_icache_page;
+ __flush_icache_page = r3k_flush_icache_page;
flush_icache_range = r3k_flush_icache_range;
flush_cache_sigtramp = r3k_flush_cache_sigtramp;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 069803f..0b2da53 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -89,7 +89,7 @@
blast_dcache32_page(addr);
}
-static inline void r4k_blast_dcache_page_setup(void)
+static void __init r4k_blast_dcache_page_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
@@ -103,7 +103,7 @@
static void (* r4k_blast_dcache_page_indexed)(unsigned long addr);
-static inline void r4k_blast_dcache_page_indexed_setup(void)
+static void __init r4k_blast_dcache_page_indexed_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
@@ -117,7 +117,7 @@
static void (* r4k_blast_dcache)(void);
-static inline void r4k_blast_dcache_setup(void)
+static void __init r4k_blast_dcache_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
@@ -202,7 +202,7 @@
static void (* r4k_blast_icache_page)(unsigned long addr);
-static inline void r4k_blast_icache_page_setup(void)
+static void __init r4k_blast_icache_page_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
@@ -219,7 +219,7 @@
static void (* r4k_blast_icache_page_indexed)(unsigned long addr);
-static inline void r4k_blast_icache_page_indexed_setup(void)
+static void __init r4k_blast_icache_page_indexed_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
@@ -243,7 +243,7 @@
static void (* r4k_blast_icache)(void);
-static inline void r4k_blast_icache_setup(void)
+static void __init r4k_blast_icache_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
@@ -264,7 +264,7 @@
static void (* r4k_blast_scache_page)(unsigned long addr);
-static inline void r4k_blast_scache_page_setup(void)
+static void __init r4k_blast_scache_page_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
@@ -282,7 +282,7 @@
static void (* r4k_blast_scache_page_indexed)(unsigned long addr);
-static inline void r4k_blast_scache_page_indexed_setup(void)
+static void __init r4k_blast_scache_page_indexed_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
@@ -300,7 +300,7 @@
static void (* r4k_blast_scache)(void);
-static inline void r4k_blast_scache_setup(void)
+static void __init r4k_blast_scache_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
@@ -475,7 +475,7 @@
}
}
if (exec) {
- if (cpu_has_vtag_icache) {
+ if (cpu_has_vtag_icache && mm == current->active_mm) {
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0)
@@ -599,7 +599,7 @@
* We're not sure of the virtual address(es) involved here, so
* we have to flush the entire I-cache.
*/
- if (cpu_has_vtag_icache) {
+ if (cpu_has_vtag_icache && vma->vm_mm == current->active_mm) {
int cpu = smp_processor_id();
if (cpu_context(cpu, vma->vm_mm) != 0)
@@ -1221,7 +1221,7 @@
}
}
-static inline void coherency_setup(void)
+static void __init coherency_setup(void)
{
change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
@@ -1242,7 +1242,7 @@
clear_c0_config(CONF_CU);
break;
/*
- * We need to catch the ealry Alchemy SOCs with
+ * We need to catch the early Alchemy SOCs with
* the write-only co_config.od bit and set it back to one...
*/
case CPU_AU1000: /* rev. DA, HA, HB */
@@ -1291,7 +1291,7 @@
__flush_cache_all = r4k___flush_cache_all;
flush_cache_mm = r4k_flush_cache_mm;
flush_cache_page = r4k_flush_cache_page;
- flush_icache_page = r4k_flush_icache_page;
+ __flush_icache_page = r4k_flush_icache_page;
flush_cache_range = r4k_flush_cache_range;
flush_cache_sigtramp = r4k_flush_cache_sigtramp;
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index 2d71efb..16bad7c 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -155,6 +155,26 @@
}
/*
+ * Invalidate a range of the icache. The addresses are virtual, and
+ * the cache is virtually indexed and tagged. However, we don't
+ * necessarily have the right ASID context, so use index ops instead
+ * of hit ops.
+ */
+static inline void __sb1_flush_icache_range(unsigned long start,
+ unsigned long end)
+{
+ start &= ~(icache_line_size - 1);
+ end = (end + icache_line_size - 1) & ~(icache_line_size - 1);
+
+ while (start != end) {
+ cache_set_op(Index_Invalidate_I, start & icache_index_mask);
+ start += icache_line_size;
+ }
+ mispredict();
+ sync();
+}
+
+/*
* Flush the icache for a given physical page. Need to writeback the
* dcache first, then invalidate the icache. If the page isn't
* executable, nothing is required.
@@ -173,8 +193,11 @@
/*
* Bumping the ASID is probably cheaper than the flush ...
*/
- if (cpu_context(cpu, vma->vm_mm) != 0)
- drop_mmu_context(vma->vm_mm, cpu);
+ if (vma->vm_mm == current->active_mm) {
+ if (cpu_context(cpu, vma->vm_mm) != 0)
+ drop_mmu_context(vma->vm_mm, cpu);
+ } else
+ __sb1_flush_icache_range(addr, addr + PAGE_SIZE);
}
#ifdef CONFIG_SMP
@@ -210,26 +233,6 @@
__attribute__((alias("local_sb1_flush_cache_page")));
#endif
-/*
- * Invalidate a range of the icache. The addresses are virtual, and
- * the cache is virtually indexed and tagged. However, we don't
- * necessarily have the right ASID context, so use index ops instead
- * of hit ops.
- */
-static inline void __sb1_flush_icache_range(unsigned long start,
- unsigned long end)
-{
- start &= ~(icache_line_size - 1);
- end = (end + icache_line_size - 1) & ~(icache_line_size - 1);
-
- while (start != end) {
- cache_set_op(Index_Invalidate_I, start & icache_index_mask);
- start += icache_line_size;
- }
- mispredict();
- sync();
-}
-
/*
* Invalidate all caches on this CPU
@@ -326,9 +329,12 @@
* If there's a context, bump the ASID (cheaper than a flush,
* since we don't know VAs!)
*/
- if (cpu_context(cpu, vma->vm_mm) != 0) {
- drop_mmu_context(vma->vm_mm, cpu);
- }
+ if (vma->vm_mm == current->active_mm) {
+ if (cpu_context(cpu, vma->vm_mm) != 0)
+ drop_mmu_context(vma->vm_mm, cpu);
+ } else
+ __sb1_flush_icache_range(start, start + PAGE_SIZE);
+
}
#ifdef CONFIG_SMP
@@ -520,7 +526,7 @@
/* These routines are for Icache coherence with the Dcache */
flush_icache_range = sb1_flush_icache_range;
- flush_icache_page = sb1_flush_icache_page;
+ __flush_icache_page = sb1_flush_icache_page;
flush_icache_all = __sb1_flush_icache_all; /* local only */
/* This implies an Icache flush too, so can't be nop'ed */
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 5dfc9b1..932a09d 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -382,7 +382,7 @@
flush_cache_mm = (void *) tx39h_flush_icache_all;
flush_cache_range = (void *) tx39h_flush_icache_all;
flush_cache_page = (void *) tx39h_flush_icache_all;
- flush_icache_page = (void *) tx39h_flush_icache_all;
+ __flush_icache_page = (void *) tx39h_flush_icache_all;
flush_icache_range = (void *) tx39h_flush_icache_all;
flush_cache_sigtramp = (void *) tx39h_flush_icache_all;
@@ -408,7 +408,7 @@
flush_cache_mm = tx39_flush_cache_mm;
flush_cache_range = tx39_flush_cache_range;
flush_cache_page = tx39_flush_cache_page;
- flush_icache_page = tx39_flush_icache_page;
+ __flush_icache_page = tx39_flush_icache_page;
flush_icache_range = tx39_flush_icache_range;
flush_cache_sigtramp = tx39_flush_cache_sigtramp;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index ddd3a2d..40c8b02 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -25,7 +25,7 @@
void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
unsigned long pfn);
void (*flush_icache_range)(unsigned long start, unsigned long end);
-void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
+void (*__flush_icache_page)(struct vm_area_struct *vma, struct page *page);
/* MIPS specific cache operations */
void (*flush_cache_sigtramp)(unsigned long addr);
@@ -70,6 +70,8 @@
struct address_space *mapping = page_mapping(page);
unsigned long addr;
+ if (PageHighMem(page))
+ return;
if (mapping && !mapping_mapped(mapping)) {
SetPageDcacheDirty(page);
return;
@@ -91,16 +93,16 @@
{
struct page *page;
unsigned long pfn, addr;
+ int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc;
pfn = pte_pfn(pte);
- if (pfn_valid(pfn) && (page = pfn_to_page(pfn), page_mapping(page)) &&
- Page_dcache_dirty(page)) {
- if (pages_do_alias((unsigned long)page_address(page),
- address & PAGE_MASK)) {
- addr = (unsigned long) page_address(page);
+ if (unlikely(!pfn_valid(pfn)))
+ return;
+ page = pfn_to_page(pfn);
+ if (page_mapping(page) && Page_dcache_dirty(page)) {
+ addr = (unsigned long) page_address(page);
+ if (exec || pages_do_alias(addr, address & PAGE_MASK))
flush_data_cache_page(addr);
- }
-
ClearPageDcacheDirty(page);
}
}
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index e3a6172..a4f8c45 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -89,7 +89,7 @@
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
} else {
- if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
goto bad_area;
}
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 2cde1b7..2e0e21e 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -26,11 +26,6 @@
*/
#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
-/* CP0 hazard avoidance. */
-#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
- "nop; nop; nop; nop; nop; nop;\n\t" \
- ".set reorder\n\t")
-
/* Atomicity and interruptability */
#ifdef CONFIG_MIPS_MT_SMTC
@@ -126,7 +121,7 @@
start += (PAGE_SIZE << 1);
mtc0_tlbw_hazard();
tlb_probe();
- BARRIER;
+ tlb_probe_hazard();
idx = read_c0_index();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
@@ -168,7 +163,7 @@
start += (PAGE_SIZE << 1);
mtc0_tlbw_hazard();
tlb_probe();
- BARRIER;
+ tlb_probe_hazard();
idx = read_c0_index();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
@@ -202,7 +197,7 @@
write_c0_entryhi(page | newpid);
mtc0_tlbw_hazard();
tlb_probe();
- BARRIER;
+ tlb_probe_hazard();
idx = read_c0_index();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
@@ -235,7 +230,7 @@
write_c0_entryhi(page);
mtc0_tlbw_hazard();
tlb_probe();
- BARRIER;
+ tlb_probe_hazard();
idx = read_c0_index();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
@@ -279,7 +274,7 @@
pgdp = pgd_offset(vma->vm_mm, address);
mtc0_tlbw_hazard();
tlb_probe();
- BARRIER;
+ tlb_probe_hazard();
pudp = pud_offset(pgdp, address);
pmdp = pmd_offset(pudp, address);
idx = read_c0_index();
@@ -320,7 +315,7 @@
pgdp = pgd_offset(vma->vm_mm, address);
mtc0_tlbw_hazard();
tlb_probe();
- BARRIER;
+ tlb_probe_hazard();
pmdp = pmd_offset(pgdp, address);
idx = read_c0_index();
ptep = pte_offset_map(pmdp, address);
@@ -351,7 +346,7 @@
wired = read_c0_wired();
write_c0_wired(wired + 1);
write_c0_index(wired);
- BARRIER;
+ tlbw_use_hazard(); /* What is the hazard here? */
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
write_c0_entrylo0(entrylo0);
@@ -361,7 +356,7 @@
tlbw_use_hazard();
write_c0_entryhi(old_ctx);
- BARRIER;
+ tlbw_use_hazard(); /* What is the hazard here? */
write_c0_pagemask(old_pagemask);
local_flush_tlb_all();
EXIT_CRITICAL(flags);
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 35d5927..edefa97 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -11,7 +11,6 @@
obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o
obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o
-obj-$(CONFIG_MIPS_GT96100) += ops-gt96100.o
obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
@@ -28,8 +27,7 @@
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
-obj-$(CONFIG_MIPS_EV96100) += fixup-ev64120.o
-obj-$(CONFIG_MIPS_EV96100) += fixup-ev96100.o pci-ev96100.o
+obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o
obj-$(CONFIG_MIPS_ITE8172) += fixup-ite8172g.o
obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
index 439510a..c6cd6e9 100644
--- a/arch/mips/pci/fixup-atlas.c
+++ b/arch/mips/pci/fixup-atlas.c
@@ -21,16 +21,16 @@
#include <asm/mips-boards/atlasint.h>
-#define PCIA ATLASINT_PCIA
-#define PCIB ATLASINT_PCIB
-#define PCIC ATLASINT_PCIC
-#define PCID ATLASINT_PCID
-#define INTA ATLASINT_INTA
-#define INTB ATLASINT_INTB
-#define ETH ATLASINT_ETH
-#define INTC ATLASINT_INTC
-#define SCSI ATLASINT_SCSI
-#define INTD ATLASINT_INTD
+#define PCIA ATLAS_INT_PCIA
+#define PCIB ATLAS_INT_PCIB
+#define PCIC ATLAS_INT_PCIC
+#define PCID ATLAS_INT_PCID
+#define INTA ATLAS_INT_INTA
+#define INTB ATLAS_INT_INTB
+#define ETH ATLAS_INT_ETH
+#define INTC ATLAS_INT_INTC
+#define SCSI ATLAS_INT_SCSI
+#define INTD ATLAS_INT_INTD
static char irq_tab[][5] __initdata = {
/* INTA INTB INTC INTD */
diff --git a/arch/mips/pci/fixup-ev96100.c b/arch/mips/pci/fixup-ev96100.c
deleted file mode 100644
index e2bc977..0000000
--- a/arch/mips/pci/fixup-ev96100.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * EV96100 Board specific pci fixups.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-static char irq_tab_ev96100[][5] __initdata = {
- [8] = { 0, 5, 5, 5, 5 },
- [9] = { 0, 2, 2, 2, 2 }
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- return irq_tab_ev96100[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 0c0c1e65..8ae4648 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -110,7 +110,7 @@
if (first_cfg) {
/* reserve a wired entry for pci config accesses */
first_cfg = 0;
- pci_cfg_vm = get_vm_area(0x2000, 0);
+ pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
if (!pci_cfg_vm)
panic (KERN_ERR "PCI unable to get vm area\n");
pci_cfg_wired_entry = read_c0_wired();
diff --git a/arch/mips/pci/ops-gt96100.c b/arch/mips/pci/ops-gt96100.c
deleted file mode 100644
index 9e4ea66..0000000
--- a/arch/mips/pci/ops-gt96100.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Galileo EV96100 board specific pci support.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/generic/pci.c
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/delay.h>
-#include <asm/gt64120.h>
-#include <asm/galileo-boards/ev96100.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-static int static gt96100_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
-{
- unsigned char bus = bus->number;
- u32 intr;
-
- /*
- * Because of a bug in the galileo (for slot 31).
- */
- if (bus == 0 && devfn >= PCI_DEVFN(31, 0))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /* Clear cause register bits */
- GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
- GT_INTRCAUSE_TARABORT0_BIT));
-
- /* Setup address */
- GT_WRITE(GT_PCI0_CFGADDR_OFS,
- (bus << GT_PCI0_CFGADDR_BUSNUM_SHF) |
- (devfn << GT_PCI0_CFGADDR_FUNCTNUM_SHF) |
- ((where / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) |
- GT_PCI0_CFGADDR_CONFIGEN_BIT);
- udelay(2);
-
-
- if (access_type == PCI_ACCESS_WRITE) {
- if (devfn != 0)
- *data = le32_to_cpu(*data);
- GT_WRITE(GT_PCI0_CFGDATA_OFS, *data);
- } else {
- *data = GT_READ(GT_PCI0_CFGDATA_OFS);
- if (devfn != 0)
- *data = le32_to_cpu(*data);
- }
-
- udelay(2);
-
- /* Check for master or target abort */
- intr = GT_READ(GT_INTRCAUSE_OFS);
-
- if (intr & (GT_INTRCAUSE_MASABORT0_BIT | GT_INTRCAUSE_TARABORT0_BIT)) {
- /* Error occured */
-
- /* Clear bits */
- GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT |
- GT_INTRCAUSE_TARABORT0_BIT));
- return -1;
- }
- return 0;
-}
-
-/*
- * We can't address 8 and 16 bit words directly. Instead we have to
- * read/write a 32bit word and mask/modify the data we actually want.
- */
-static int gt96100_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
-{
- u32 data = 0;
-
- if (gt96100_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
-
- case 2:
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- break;
-
- case 4:
- *val = data;
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int gt96100_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
-
- switch (size) {
- case 1:
- if (gt96100_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (gt96100_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-
- case 2:
- if (gt96100_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (gt96100_config_access(PCI_ACCESS_WRITE, dev, where, &data))
- return -1;
-
-
- return PCIBIOS_SUCCESSFUL;
-
- case 4:
- if (gt96100_config_access(PCI_ACCESS_WRITE, dev, where, &val))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
- }
-}
-
-struct pci_ops gt96100_pci_ops = {
- .read = gt96100_pcibios_read,
- .write = gt96100_pcibios_write
-};
diff --git a/arch/mips/pci/pci-ev96100.c b/arch/mips/pci/pci-ev96100.c
deleted file mode 100644
index f9457ea..0000000
--- a/arch/mips/pci/pci-ev96100.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-static struct resource pci_io_resource = {
- .name = "io pci IO space",
- .start = 0x10000000,
- .end = 0x11ffffff,
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .name = "ext pci memory space",
- .start = 0x12000000,
- .end = 0x13ffffff,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops gt96100_pci_ops;
-
-struct pci_controller ev96100_controller = {
- .pci_ops = >96100_pci_ops,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-static void ev96100_pci_init(void)
-{
- register_pci_controller(&ev96100_controller);
-}
-
-arch_initcall(ev96100_pci_init);
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 80eb9af..405ce01 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -16,8 +16,6 @@
#include <asm/sn/intr.h>
#include <asm/sn/sn0/hub.h>
-extern unsigned int allocate_irqno(void);
-
/*
* Max #PCI busses we can handle; ie, max #PCI bridges.
*/
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index ed325f0..a0222fa 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -469,21 +469,6 @@
#endif /* CONFIG_KGDB */
-static inline int dclz(unsigned long long x)
-{
- int lz;
-
- __asm__ (
- " .set push \n"
- " .set mips64 \n"
- " dclz %0, %1 \n"
- " .set pop \n"
- : "=r" (lz)
- : "r" (x));
-
- return lz;
-}
-
extern void bcm1480_timer_interrupt(struct pt_regs *regs);
extern void bcm1480_mailbox_interrupt(struct pt_regs *regs);
extern void bcm1480_kgdb_interrupt(struct pt_regs *regs);
@@ -536,9 +521,9 @@
if (mask_h) {
if (mask_h ^ 1)
- do_IRQ(63 - dclz(mask_h), regs);
+ do_IRQ(fls64(mask_h) - 1, regs);
else
- do_IRQ(127 - dclz(mask_l), regs);
+ do_IRQ(63 + fls64(mask_l), regs);
}
}
}
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 1de71ad..a451b4c 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -419,21 +419,6 @@
#endif /* CONFIG_KGDB */
-static inline int dclz(unsigned long long x)
-{
- int lz;
-
- __asm__ (
- " .set push \n"
- " .set mips64 \n"
- " dclz %0, %1 \n"
- " .set pop \n"
- : "=r" (lz)
- : "r" (x));
-
- return lz;
-}
-
extern void sb1250_timer_interrupt(struct pt_regs *regs);
extern void sb1250_mailbox_interrupt(struct pt_regs *regs);
extern void sb1250_kgdb_interrupt(struct pt_regs *regs);
@@ -490,6 +475,6 @@
mask = __raw_readq(IOADDR(A_IMR_REGISTER(smp_processor_id(),
R_IMR_INTERRUPT_STATUS_BASE)));
if (mask)
- do_IRQ(63 - dclz(mask), regs);
+ do_IRQ(fls64(mask) - 1, regs);
}
}
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index de1ef2f..a0dd1b0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -731,11 +731,10 @@
def_bool y
depends on SMP && PPC_PSERIES
-source "mm/Kconfig"
-
-config HAVE_ARCH_EARLY_PFN_TO_NID
+config ARCH_POPULATES_NODE_MAP
def_bool y
- depends on NEED_MULTIPLE_NODES
+
+source "mm/Kconfig"
config ARCH_MEMORY_PROBE
def_bool y
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 2e29286..5e391fc 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -740,7 +740,7 @@
return sys_umask((int)mask);
}
-#ifdef CONFIG_SYSCTL
+#ifdef CONFIG_SYSCTL_SYSCALL
struct __sysctl_args32 {
u32 name;
int nlen;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index eebd8b8..16fe027 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -256,20 +256,22 @@
boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
+ /* Add active regions with valid PFNs */
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ unsigned long start_pfn, end_pfn;
+ start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ add_active_range(0, start_pfn, end_pfn);
+ }
+
/* Add all physical memory to the bootmem map, mark each area
* present.
*/
- for (i = 0; i < lmb.memory.cnt; i++) {
- unsigned long base = lmb.memory.region[i].base;
- unsigned long size = lmb_size_bytes(&lmb.memory, i);
#ifdef CONFIG_HIGHMEM
- if (base >= total_lowmem)
- continue;
- if (base + size > total_lowmem)
- size = total_lowmem - base;
+ free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
+#else
+ free_bootmem_with_active_regions(0, max_pfn);
#endif
- free_bootmem(base, size);
- }
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++)
@@ -277,9 +279,8 @@
lmb_size_bytes(&lmb.reserved, i));
/* XXX need to clip this if using highmem? */
- for (i = 0; i < lmb.memory.cnt; i++)
- memory_present(0, lmb_start_pfn(&lmb.memory, i),
- lmb_end_pfn(&lmb.memory, i));
+ sparse_memory_present_with_active_regions(0);
+
init_bootmem_done = 1;
}
@@ -288,10 +289,9 @@
*/
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES];
- unsigned long zholes_size[MAX_NR_ZONES];
unsigned long total_ram = lmb_phys_mem_size();
unsigned long top_of_ram = lmb_end_of_DRAM();
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
#ifdef CONFIG_HIGHMEM
map_page(PKMAP_BASE, 0, 0); /* XXX gross */
@@ -307,26 +307,13 @@
top_of_ram, total_ram);
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
- /*
- * All pages are DMA-able so we put them all in the DMA zone.
- */
- memset(zones_size, 0, sizeof(zones_size));
- memset(zholes_size, 0, sizeof(zholes_size));
-
- zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
- zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
-
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
- zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
- zholes_size[ZONE_HIGHMEM] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+ max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[1] = top_of_ram >> PAGE_SHIFT;
#else
- zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
- zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-
- free_area_init_node(0, NODE_DATA(0), zones_size,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
+ max_zone_pfns[0] = top_of_ram >> PAGE_SHIFT;
+#endif
+ free_area_init_nodes(max_zone_pfns);
}
#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 6c0f1c7..43c2720 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -39,96 +39,6 @@
static int min_common_depth;
static int n_mem_addr_cells, n_mem_size_cells;
-/*
- * We need somewhere to store start/end/node for each region until we have
- * allocated the real node_data structures.
- */
-#define MAX_REGIONS (MAX_LMB_REGIONS*2)
-static struct {
- unsigned long start_pfn;
- unsigned long end_pfn;
- int nid;
-} init_node_data[MAX_REGIONS] __initdata;
-
-int __init early_pfn_to_nid(unsigned long pfn)
-{
- unsigned int i;
-
- for (i = 0; init_node_data[i].end_pfn; i++) {
- unsigned long start_pfn = init_node_data[i].start_pfn;
- unsigned long end_pfn = init_node_data[i].end_pfn;
-
- if ((start_pfn <= pfn) && (pfn < end_pfn))
- return init_node_data[i].nid;
- }
-
- return -1;
-}
-
-void __init add_region(unsigned int nid, unsigned long start_pfn,
- unsigned long pages)
-{
- unsigned int i;
-
- dbg("add_region nid %d start_pfn 0x%lx pages 0x%lx\n",
- nid, start_pfn, pages);
-
- for (i = 0; init_node_data[i].end_pfn; i++) {
- if (init_node_data[i].nid != nid)
- continue;
- if (init_node_data[i].end_pfn == start_pfn) {
- init_node_data[i].end_pfn += pages;
- return;
- }
- if (init_node_data[i].start_pfn == (start_pfn + pages)) {
- init_node_data[i].start_pfn -= pages;
- return;
- }
- }
-
- /*
- * Leave last entry NULL so we dont iterate off the end (we use
- * entry.end_pfn to terminate the walk).
- */
- if (i >= (MAX_REGIONS - 1)) {
- printk(KERN_ERR "WARNING: too many memory regions in "
- "numa code, truncating\n");
- return;
- }
-
- init_node_data[i].start_pfn = start_pfn;
- init_node_data[i].end_pfn = start_pfn + pages;
- init_node_data[i].nid = nid;
-}
-
-/* We assume init_node_data has no overlapping regions */
-void __init get_region(unsigned int nid, unsigned long *start_pfn,
- unsigned long *end_pfn, unsigned long *pages_present)
-{
- unsigned int i;
-
- *start_pfn = -1UL;
- *end_pfn = *pages_present = 0;
-
- for (i = 0; init_node_data[i].end_pfn; i++) {
- if (init_node_data[i].nid != nid)
- continue;
-
- *pages_present += init_node_data[i].end_pfn -
- init_node_data[i].start_pfn;
-
- if (init_node_data[i].start_pfn < *start_pfn)
- *start_pfn = init_node_data[i].start_pfn;
-
- if (init_node_data[i].end_pfn > *end_pfn)
- *end_pfn = init_node_data[i].end_pfn;
- }
-
- /* We didnt find a matching region, return start/end as 0 */
- if (*start_pfn == -1UL)
- *start_pfn = 0;
-}
-
static void __cpuinit map_cpu_to_node(int cpu, int node)
{
numa_cpu_lookup_table[cpu] = node;
@@ -468,8 +378,8 @@
continue;
}
- add_region(nid, start >> PAGE_SHIFT,
- size >> PAGE_SHIFT);
+ add_active_range(nid, start >> PAGE_SHIFT,
+ (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
if (--ranges)
goto new_range;
@@ -482,6 +392,7 @@
{
unsigned long top_of_ram = lmb_end_of_DRAM();
unsigned long total_ram = lmb_phys_mem_size();
+ unsigned long start_pfn, end_pfn;
unsigned int i;
printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
@@ -489,9 +400,11 @@
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
- for (i = 0; i < lmb.memory.cnt; ++i)
- add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT,
- lmb_size_pages(&lmb.memory, i));
+ for (i = 0; i < lmb.memory.cnt; ++i) {
+ start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
+ end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+ add_active_range(0, start_pfn, end_pfn);
+ }
node_set_online(0);
}
@@ -630,11 +543,11 @@
(void *)(unsigned long)boot_cpuid);
for_each_online_node(nid) {
- unsigned long start_pfn, end_pfn, pages_present;
+ unsigned long start_pfn, end_pfn;
unsigned long bootmem_paddr;
unsigned long bootmap_pages;
- get_region(nid, &start_pfn, &end_pfn, &pages_present);
+ get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
/* Allocate the node structure node local if possible */
NODE_DATA(nid) = careful_allocation(nid,
@@ -667,19 +580,7 @@
init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
start_pfn, end_pfn);
- /* Add free regions on this node */
- for (i = 0; init_node_data[i].end_pfn; i++) {
- unsigned long start, end;
-
- if (init_node_data[i].nid != nid)
- continue;
-
- start = init_node_data[i].start_pfn << PAGE_SHIFT;
- end = init_node_data[i].end_pfn << PAGE_SHIFT;
-
- dbg("free_bootmem %lx %lx\n", start, end - start);
- free_bootmem_node(NODE_DATA(nid), start, end - start);
- }
+ free_bootmem_with_active_regions(nid, end_pfn);
/* Mark reserved regions on this node */
for (i = 0; i < lmb.reserved.cnt; i++) {
@@ -710,44 +611,16 @@
}
}
- /* Add regions into sparsemem */
- for (i = 0; init_node_data[i].end_pfn; i++) {
- unsigned long start, end;
-
- if (init_node_data[i].nid != nid)
- continue;
-
- start = init_node_data[i].start_pfn;
- end = init_node_data[i].end_pfn;
-
- memory_present(nid, start, end);
- }
+ sparse_memory_present_with_active_regions(nid);
}
}
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES];
- unsigned long zholes_size[MAX_NR_ZONES];
- int nid;
-
- memset(zones_size, 0, sizeof(zones_size));
- memset(zholes_size, 0, sizeof(zholes_size));
-
- for_each_online_node(nid) {
- unsigned long start_pfn, end_pfn, pages_present;
-
- get_region(nid, &start_pfn, &end_pfn, &pages_present);
-
- zones_size[ZONE_DMA] = end_pfn - start_pfn;
- zholes_size[ZONE_DMA] = zones_size[ZONE_DMA] - pages_present;
-
- dbg("free_area_init node %d %lx %lx (hole: %lx)\n", nid,
- zones_size[ZONE_DMA], start_pfn, zholes_size[ZONE_DMA]);
-
- free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn,
- zholes_size);
- }
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {
+ lmb_end_of_DRAM() >> PAGE_SHIFT
+ };
+ free_area_init_nodes(max_zone_pfns);
}
static int __init early_numa(char *p)
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 7b45728..3950ddc 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -82,7 +82,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
out:
@@ -120,7 +119,7 @@
ret = 0;
inode->i_op = &spufs_file_iops;
inode->i_fop = fops;
- inode->u.generic_ip = SPUFS_I(inode)->i_ctx = get_spu_context(ctx);
+ inode->i_private = SPUFS_I(inode)->i_ctx = get_spu_context(ctx);
d_add(dentry, inode);
out:
return ret;
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index 641e651..446e17d 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -85,7 +85,7 @@
rc = seq_open(file, &hcall_inst_seq_ops);
seq = file->private_data;
- seq->private = file->f_dentry->d_inode->u.generic_ip;
+ seq->private = file->f_dentry->d_inode->i_private;
return rc;
}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index b604926..723972b 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -339,7 +339,7 @@
for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0;
pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) {
u8 id = readb(devbase + pos + PCI_CAP_LIST_ID);
- if (id == PCI_CAP_ID_HT_IRQCONF) {
+ if (id == PCI_CAP_ID_HT) {
id = readb(devbase + pos + 3);
if (id == 0x80)
break;
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 8fa10cf..fdd9e7b 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -953,6 +953,9 @@
config HIGHMEM
bool "High memory support"
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
source kernel/Kconfig.hz
source kernel/Kconfig.preempt
source "mm/Kconfig"
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index 523392d..4102000 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -358,8 +358,8 @@
*/
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES], i;
-
+ unsigned long start_pfn, end_pfn;
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
#ifdef CONFIG_HIGHMEM
map_page(PKMAP_BASE, 0, 0); /* XXX gross */
pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
@@ -369,19 +369,18 @@
(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
kmap_prot = PAGE_KERNEL;
#endif /* CONFIG_HIGHMEM */
-
- /*
- * All pages are DMA-able so we put them all in the DMA zone.
- */
- zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
- for (i = 1; i < MAX_NR_ZONES; i++)
- zones_size[i] = 0;
+ /* All pages are DMA-able so we put them all in the DMA zone. */
+ start_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
+ end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
+ add_active_range(0, start_pfn, end_pfn);
#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
+ max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[1] = total_memory >> PAGE_SHIFT;
+#else
+ max_zone_pfns[0] = total_memory >> PAGE_SHIFT;
#endif /* CONFIG_HIGHMEM */
-
- free_area_init(zones_size);
+ free_area_init_nodes(max_zone_pfns);
}
void __init mem_init(void)
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index bdade5f..813fc21 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -91,7 +91,6 @@
ret->i_mode = mode;
ret->i_uid = hypfs_info->uid;
ret->i_gid = hypfs_info->gid;
- ret->i_blksize = PAGE_CACHE_SIZE;
ret->i_blocks = 0;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
if (mode & S_IFDIR)
@@ -104,13 +103,13 @@
static void hypfs_drop_inode(struct inode *inode)
{
- kfree(inode->u.generic_ip);
+ kfree(inode->i_private);
generic_delete_inode(inode);
}
static int hypfs_open(struct inode *inode, struct file *filp)
{
- char *data = filp->f_dentry->d_inode->u.generic_ip;
+ char *data = filp->f_dentry->d_inode->i_private;
struct hypfs_sb_info *fs_info;
if (filp->f_mode & FMODE_WRITE) {
@@ -352,7 +351,7 @@
parent->d_inode->i_nlink++;
} else
BUG();
- inode->u.generic_ip = data;
+ inode->i_private = data;
d_instantiate(dentry, inode);
dget(dentry);
return dentry;
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 785c9f7..91b2884 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -708,7 +708,7 @@
return ret;
}
-#ifdef CONFIG_SYSCTL
+#ifdef CONFIG_SYSCTL_SYSCALL
struct __sysctl_args32 {
u32 name;
int nlen;
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 7ba2092..43f3d0c 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -603,7 +603,7 @@
debug_info_t *debug_info, *debug_info_snapshot;
down(&debug_lock);
- debug_info = (struct debug_info*)file->f_dentry->d_inode->u.generic_ip;
+ debug_info = file->f_dentry->d_inode->i_private;
/* find debug view */
for (i = 0; i < DEBUG_MAX_VIEWS; i++) {
if (!debug_info->views[i])
diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c
index de83f38..d9428a0 100644
--- a/arch/s390/kernel/stacktrace.c
+++ b/arch/s390/kernel/stacktrace.c
@@ -59,9 +59,7 @@
}
}
-void save_stack_trace(struct stack_trace *trace,
- struct task_struct *task, int all_contexts,
- unsigned int skip)
+void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
{
register unsigned long sp asm ("15");
unsigned long orig_sp;
@@ -69,22 +67,23 @@
sp &= PSW_ADDR_INSN;
orig_sp = sp;
- sp = save_context_stack(trace, &skip, sp,
+ sp = save_context_stack(trace, &trace->skip, sp,
S390_lowcore.panic_stack - PAGE_SIZE,
S390_lowcore.panic_stack);
- if ((sp != orig_sp) && !all_contexts)
+ if ((sp != orig_sp) && !trace->all_contexts)
return;
- sp = save_context_stack(trace, &skip, sp,
+ sp = save_context_stack(trace, &trace->skip, sp,
S390_lowcore.async_stack - ASYNC_SIZE,
S390_lowcore.async_stack);
- if ((sp != orig_sp) && !all_contexts)
+ if ((sp != orig_sp) && !trace->all_contexts)
return;
if (task)
- save_context_stack(trace, &skip, sp,
+ save_context_stack(trace, &trace->skip, sp,
(unsigned long) task_stack_page(task),
(unsigned long) task_stack_page(task) + THREAD_SIZE);
else
- save_context_stack(trace, &skip, sp, S390_lowcore.thread_info,
+ save_context_stack(trace, &trace->skip, sp,
+ S390_lowcore.thread_info,
S390_lowcore.thread_info + THREAD_SIZE);
return;
}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1a0db1d..1cc5c9b 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,6 +8,7 @@
config SUPERH
bool
default y
+ select EMBEDDED
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
@@ -51,18 +52,23 @@
menu "System type"
+config SOLUTION_ENGINE
+ bool
+
choice
prompt "SuperH system type"
default SH_UNKNOWN
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
+ select SOLUTION_ENGINE
help
Select SolutionEngine if configuring for a Hitachi SH7709
or SH7750 evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
+ select SOLUTION_ENGINE
select CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
@@ -70,17 +76,27 @@
config SH_7300_SOLUTION_ENGINE
bool "SolutionEngine7300"
+ select SOLUTION_ENGINE
select CPU_SUBTYPE_SH7300
help
- Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V)
- evaluation board.
+ Select 7300 SolutionEngine if configuring for a Hitachi
+ SH7300(SH-Mobile V) evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+ bool "SolutionEngine7343"
+ select SOLUTION_ENGINE
+ select CPU_SUBTYPE_SH7343
+ help
+ Select 7343 SolutionEngine if configuring for a Hitachi
+ SH7343 (SH-Mobile 3AS) evaluation board.
config SH_73180_SOLUTION_ENGINE
bool "SolutionEngine73180"
- select CPU_SUBTYPE_SH73180
- help
- Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3)
- evaluation board.
+ select SOLUTION_ENGINE
+ select CPU_SUBTYPE_SH73180
+ help
+ Select 73180 SolutionEngine if configuring for a Hitachi
+ SH73180(SH-Mobile 3) evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
@@ -89,12 +105,6 @@
Select SystemH if you are configuring for a Renesas SystemH
7751R evaluation board.
-config SH_STB1_HARP
- bool "STB1_Harp"
-
-config SH_STB1_OVERDRIVE
- bool "STB1_Overdrive"
-
config SH_HP6XX
bool "HP6XX"
help
@@ -102,19 +112,6 @@
More information (hardware only) at
<http://www.hp.com/jornada/>.
-config SH_CQREEK
- bool "CqREEK"
- help
- Select CqREEK if configuring for a CqREEK SH7708 or SH7750.
- More information at
- <http://sources.redhat.com/ecos/hardware.html#SuperH>.
-
-config SH_DMIDA
- bool "DMIDA"
- help
- Select DMIDA if configuring for a DataMyte 4000 Industrial
- Digital Assistant. More information at <http://www.dmida.com/>.
-
config SH_EC3104
bool "EC3104"
help
@@ -136,25 +133,9 @@
<http://www.m17n.org/linux-sh/dreamcast/>. There is a
Dreamcast project is at <http://linuxdc.sourceforge.net/>.
-config SH_CAT68701
- bool "CAT68701"
-
config SH_BIGSUR
bool "BigSur"
-config SH_SH2000
- bool "SH2000"
- select CPU_SUBTYPE_SH7709
- help
- SH-2000 is a single-board computer based around SH7709A chip
- intended for embedded applications.
- It has an Ethernet interface (CS8900A), direct connected
- Compact Flash socket, three serial ports and PC-104 bus.
- More information at <http://sh2000.sh-linux.org>.
-
-config SH_ADX
- bool "ADX"
-
config SH_MPC1211
bool "Interface MPC1211"
help
@@ -184,6 +165,13 @@
Select HS7751RVOIP if configuring for a Renesas Technology
Sales VoIP board.
+config SH_7710VOIPGW
+ bool "SH7710-VOIP-GW"
+ select CPU_SUBTYPE_SH7710
+ help
+ Select this option to build a kernel for the SH7710 based
+ VOIP GW.
+
config SH_RTS7751R2D
bool "RTS7751R2D"
select CPU_SUBTYPE_SH7751R
@@ -222,6 +210,12 @@
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
+config SH_SHMIN
+ bool "SHMIN"
+ select CPU_SUBTYPE_SH7706
+ help
+ Select SHMIN if configureing for the SHMIN board
+
config SH_UNKNOWN
bool "BareCPU"
help
@@ -238,35 +232,9 @@
source "arch/sh/mm/Kconfig"
-config MEMORY_START
- hex "Physical memory start address"
- default "0x08000000"
- ---help---
- Computers built with Hitachi SuperH processors always
- map the ROM starting at address zero. But the processor
- does not specify the range that RAM takes.
-
- The physical memory (RAM) start address will be automatically
- set to 08000000. Other platforms, such as the Solution Engine
- boards typically map RAM at 0C000000.
-
- Tweak this only when porting to a new machine which does not
- already have a defconfig. Changing it from the known correct
- value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
- hex "Physical memory size"
- default "0x00400000"
- help
- This sets the default memory size assumed by your SH kernel. It can
- be overridden as normal by the 'mem=' argument on the kernel command
- line. If unsure, consult your board specifications or just leave it
- as 0x00400000 which was the default value before this became
- configurable.
-
config CF_ENABLER
bool "Compact Flash Enabler support"
- depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03
+ depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03
---help---
Compact Flash is a small, removable mass storage device introduced
in 1994 originally as a PCMCIA device. If you say `Y' here, you
@@ -294,7 +262,7 @@
- "Area5" if CompactFlash is connected to Area 5 (0x14000000)
- "Area6" if it is connected to Area 6 (0x18000000)
- "Area6" will work for most boards. For ADX, select "Area5".
+ "Area6" will work for most boards.
config CF_AREA6
bool "Area6"
@@ -316,19 +284,6 @@
endian byte order. These modes require different kernels. Say Y if
your machine is little endian, N if it's a big endian machine.
-# The SH7750 RTC module is disabled in the Dreamcast
-config SH_RTC
- bool
- depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && \
- !SH_73180_SOLUTION_ENGINE && !SH_LANDISK && \
- !SH_R7780RP
- default y
- help
- Selecting this option will allow the Linux kernel to emulate
- PC's RTC.
-
- If unsure, say N.
-
config SH_FPU
bool "FPU support"
depends on !CPU_SH3
@@ -339,14 +294,22 @@
This option must be set in order to enable the FPU.
+config SH_FPU_EMU
+ bool "FPU emulation support"
+ depends on !SH_FPU && EXPERIMENTAL
+ default n
+ help
+ Selecting this option will enable support for software FPU emulation.
+ Most SH-3 users will want to say Y here, whereas most SH-4 users will
+ want to say N.
+
config SH_DSP
bool "DSP support"
- depends on !CPU_SH4
- default y
+ default y if SH4AL_DSP || !CPU_SH4
+ default n
help
Selecting this option will enable support for SH processors that
- have DSP units (ie, SH2-DSP and SH3-DSP). It is safe to say Y here
- by default, as the existance of the DSP will be probed at runtime.
+ have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
This option must be set in order to enable the DSP.
@@ -373,6 +336,9 @@
config CPU_HAS_PINT_IRQ
bool
+config CPU_HAS_MASKREG_IRQ
+ bool
+
config CPU_HAS_INTC2_IRQ
bool
@@ -400,16 +366,19 @@
endmenu
-#source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-#source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
default "60000000" if CPU_SUBTYPE_SH7751
- default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7760
- default "27000000" if CPU_SUBTYPE_SH73180
+ default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
+ CPU_SUBTYPE_SH7760
+ default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
default "66000000" if CPU_SUBTYPE_SH4_202
help
This option is used to specify the peripheral clock frequency.
@@ -440,10 +409,8 @@
config HEARTBEAT
bool "Heartbeat LED"
- depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || \
- SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || \
- SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || \
- SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || \
+ depends on SH_MPC1211 || SH_SH03 || \
+ SH_BIGSUR || SOLUTION_ENGINE || \
SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
help
Use the power-on LED on your machine as a load meter. The exact
@@ -459,6 +426,8 @@
menu "Kernel features"
+source kernel/Kconfig.hz
+
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on EXPERIMENTAL
@@ -476,10 +445,6 @@
support. As of this writing the exact hardware interface is
strongly in flux, so no good recommendation can be made.
-config PREEMPT
- bool "Preemptible Kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
-
config SMP
bool "Symmetric multi-processing support"
---help---
@@ -515,6 +480,8 @@
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
+source "kernel/Kconfig.preempt"
+
config CPU_HAS_SR_RB
bool "CPU has SR.RB"
depends on CPU_SH3 || CPU_SH4
@@ -636,6 +603,16 @@
endmenu
+menu "Power management options (EXPERIMENTAL)"
+depends on EXPERIMENTAL
+
+source kernel/power/Kconfig
+
+config APM
+ bool "Advanced Power Management Emulation"
+ depends on PM
+endmenu
+
source "net/Kconfig"
source "drivers/Kconfig"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8fb31ab..48479e0 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -30,8 +30,35 @@
when the kernel may crash or hang before the serial console is
initialised. If unsure, say N.
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+ help
+ This option will cause messages to be printed if free stack space
+ drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+config 4KSTACKS
+ bool "Use 4Kb for kernel stacks instead of 8Kb"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the kernel will use a 4Kb stacksize for the
+ kernel stack attached to each process/thread. This facilitates
+ running more threads on a system and also reduces the pressure
+ on the VM subsystem for higher order allocations. This option
+ will also use IRQ stacks to compensate for the reduced stackspace.
+
config KGDB
bool "Include KGDB kernel debugger"
+ select FRAME_POINTER
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
@@ -112,13 +139,4 @@
endmenu
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- default y if KGDB
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
-
endmenu
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index e467a45..26d62ff 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -18,11 +18,13 @@
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml
isa-y := any
+isa-$(CONFIG_SH_DSP) := sh
isa-$(CONFIG_CPU_SH2) := sh2
+isa-$(CONFIG_CPU_SH2A) := sh2a
isa-$(CONFIG_CPU_SH3) := sh3
isa-$(CONFIG_CPU_SH4) := sh4
isa-$(CONFIG_CPU_SH4A) := sh4a
-isa-$(CONFIG_CPU_SH2A) := sh2a
+isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al
isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
@@ -30,9 +32,11 @@
isa-y := $(isa-y)-nommu
endif
+ifndef CONFIG_SH_DSP
ifndef CONFIG_SH_FPU
isa-y := $(isa-y)-nofpu
endif
+endif
cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
@@ -79,24 +83,19 @@
LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
core-y += arch/sh/kernel/ arch/sh/mm/
+core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
# Boards
machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x
machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751
machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300
+machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343
machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180
-machdir-$(CONFIG_SH_STB1_HARP) := harp
-machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive
machdir-$(CONFIG_SH_HP6XX) := hp6xx
-machdir-$(CONFIG_SH_CQREEK) := cqreek
-machdir-$(CONFIG_SH_DMIDA) := dmida
machdir-$(CONFIG_SH_EC3104) := ec3104
machdir-$(CONFIG_SH_SATURN) := saturn
machdir-$(CONFIG_SH_DREAMCAST) := dreamcast
-machdir-$(CONFIG_SH_CAT68701) := cat68701
machdir-$(CONFIG_SH_BIGSUR) := bigsur
-machdir-$(CONFIG_SH_SH2000) := sh2000
-machdir-$(CONFIG_SH_ADX) := adx
machdir-$(CONFIG_SH_MPC1211) := mpc1211
machdir-$(CONFIG_SH_SH03) := sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear
@@ -104,16 +103,16 @@
machdir-$(CONFIG_SH_RTS7751R2D) := renesas/rts7751r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) := renesas/systemh
machdir-$(CONFIG_SH_EDOSK7705) := renesas/edosk7705
+machdir-$(CONFIG_SH_R7780RP) := renesas/r7780rp
+machdir-$(CONFIG_SH_7710VOIPGW) := renesas/sh7710voipgw
machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev
+machdir-$(CONFIG_SH_LANDISK) := landisk
+machdir-$(CONFIG_SH_TITAN) := titan
+machdir-$(CONFIG_SH_SHMIN) := shmin
machdir-$(CONFIG_SH_UNKNOWN) := unknown
incdir-y := $(notdir $(machdir-y))
-
-incdir-$(CONFIG_SH_SOLUTION_ENGINE) := se
-incdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se7751
-incdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se7300
-incdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se73180
-incdir-$(CONFIG_SH_HP600) := hp6xx
+incdir-$(CONFIG_SH_HP6XX) := hp6xx
ifneq ($(machdir-y),)
core-y += arch/sh/boards/$(machdir-y)/
@@ -137,17 +136,14 @@
CPPFLAGS_vmlinux.lds := -traditional
-ifneq ($(KBUILD_SRC),)
incdir-prefix := $(srctree)/include/asm-sh/
-else
-incdir-prefix :=
-endif
# Update machine arch and proc symlinks if something which affects
# them changed. We use .arch and .mach to indicate when they were
# updated last, otherwise make uses the target directory mtime.
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/auto.conf
+include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
+ include/config/auto.conf FORCE
@echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
@@ -157,7 +153,8 @@
# don't, just reference the parent directory so the semantics are
# kept roughly the same.
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/auto.conf
+include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
+ include/config/auto.conf FORCE
@echo -n ' SYMLINK include/asm-sh/mach -> '
$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
$(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \
@@ -170,7 +167,7 @@
fi
@touch $@
-archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
+archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools
PHONY += maketools FORCE
maketools: include/linux/version.h FORCE
@@ -191,4 +188,3 @@
define archhelp
@echo ' zImage - Compressed kernel image (arch/sh/boot/zImage)'
endef
-
diff --git a/arch/sh/boards/adx/Makefile b/arch/sh/boards/adx/Makefile
deleted file mode 100644
index 5b1c531..0000000
--- a/arch/sh/boards/adx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for ADX boards
-#
-
-obj-y := setup.o irq.o irq_maskreq.o
-
diff --git a/arch/sh/boards/adx/irq.c b/arch/sh/boards/adx/irq.c
deleted file mode 100644
index c6ca409..0000000
--- a/arch/sh/boards/adx/irq.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/sh/boards/adx/irq.c
- *
- * Copyright (C) 2001 A&D Co., Ltd.
- *
- * I/O routine and setup routines for A&D ADX Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/irq.h>
-
-void init_adx_IRQ(void)
-{
- int i;
-
-/* printk("init_adx_IRQ()\n");*/
- /* setup irq_mask_register */
- irq_mask_register = (unsigned short *)0xa6000008;
-
- /* cover all external interrupt area by maskreg_irq_type
- * (Actually, irq15 doesn't exist)
- */
- for (i = 0; i < 16; i++) {
- make_maskreg_irq(i);
- disable_irq(i);
- }
-}
diff --git a/arch/sh/boards/adx/setup.c b/arch/sh/boards/adx/setup.c
deleted file mode 100644
index 4938d95..0000000
--- a/arch/sh/boards/adx/setup.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/arch/sh/board/adx/setup.c
- *
- * Copyright (C) 2001 A&D Co., Ltd.
- *
- * I/O routine and setup routines for A&D ADX Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/machvec.h>
-#include <linux/module.h>
-
-extern void init_adx_IRQ(void);
-extern void *cf_io_base;
-
-const char *get_system_type(void)
-{
- return "A&D ADX";
-}
-
-unsigned long adx_isa_port2addr(unsigned long offset)
-{
- /* CompactFlash (IDE) */
- if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset == 0x3f6)) {
- return (unsigned long)cf_io_base + offset;
- }
-
- /* eth0 */
- if ((offset >= 0x300) && (offset <= 0x30f)) {
- return 0xa5000000 + offset; /* COMM BOARD (AREA1) */
- }
-
- return offset + 0xb0000000; /* IOBUS (AREA 4)*/
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_adx __initmv = {
- .mv_nr_irqs = 48,
- .mv_isa_port2addr = adx_isa_port2addr,
- .mv_init_irq = init_adx_IRQ,
-};
-ALIAS_MV(adx)
-
-int __init platform_setup(void)
-{
- /* Nothing to see here .. */
- return 0;
-}
-
diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c
index ac946a2..1ab04da 100644
--- a/arch/sh/boards/bigsur/irq.c
+++ b/arch/sh/boards/bigsur/irq.c
@@ -19,6 +19,7 @@
* IRQ functions for a Hitachi Big Sur Evaluation Board.
*
*/
+#undef DEBUG
#include <linux/sched.h>
#include <linux/module.h>
@@ -41,10 +42,8 @@
#undef BIGSUR_DEBUG
#ifdef BIGSUR_DEBUG
-#define DPRINTK(args...) printk(args)
#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args)
#else
-#define DPRINTK(args...)
#define DIPRINTK(n, args...)
#endif /* BIGSUR_DEBUG */
@@ -60,45 +59,39 @@
/* Level 1 IRQ routines */
static void disable_bigsur_l1irq(unsigned int irq)
{
- unsigned long flags;
unsigned char mask;
unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) );
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
- DPRINTK("Disable L1 IRQ %d\n", irq);
+ pr_debug("Disable L1 IRQ %d\n", irq);
DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
- local_irq_save(flags);
/* Disable IRQ - set mask bit */
mask = inb(mask_port) | bit;
outb(mask, mask_port);
- local_irq_restore(flags);
return;
}
- DPRINTK("disable_bigsur_l1irq: Invalid IRQ %d\n", irq);
+ pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq);
}
static void enable_bigsur_l1irq(unsigned int irq)
{
- unsigned long flags;
unsigned char mask;
unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) );
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
- DPRINTK("Enable L1 IRQ %d\n", irq);
+ pr_debug("Enable L1 IRQ %d\n", irq);
DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
- local_irq_save(flags);
/* Enable L1 IRQ - clear mask bit */
mask = inb(mask_port) & ~bit;
outb(mask, mask_port);
- local_irq_restore(flags);
return;
}
- DPRINTK("enable_bigsur_l1irq: Invalid IRQ %d\n", irq);
+ pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq);
}
@@ -126,51 +119,45 @@
/* Level 2 IRQ routines */
static void disable_bigsur_l2irq(unsigned int irq)
{
- unsigned long flags;
unsigned char mask;
unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
- if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
- DPRINTK("Disable L2 IRQ %d\n", irq);
+ if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
+ pr_debug("Disable L2 IRQ %d\n", irq);
DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
- local_irq_save(flags);
/* Disable L2 IRQ - set mask bit */
mask = inb(mask_port) | bit;
outb(mask, mask_port);
- local_irq_restore(flags);
return;
}
- DPRINTK("disable_bigsur_l2irq: Invalid IRQ %d\n", irq);
+ pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq);
}
static void enable_bigsur_l2irq(unsigned int irq)
{
- unsigned long flags;
unsigned char mask;
unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
- if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
- DPRINTK("Enable L2 IRQ %d\n", irq);
+ if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
+ pr_debug("Enable L2 IRQ %d\n", irq);
DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
- local_irq_save(flags);
/* Enable L2 IRQ - clear mask bit */
mask = inb(mask_port) & ~bit;
outb(mask, mask_port);
- local_irq_restore(flags);
return;
}
- DPRINTK("enable_bigsur_l2irq: Invalid IRQ %d\n", irq);
+ pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq);
}
static void mask_and_ack_bigsur(unsigned int irq)
{
- DPRINTK("mask_and_ack_bigsur IRQ %d\n", irq);
+ pr_debug("mask_and_ack_bigsur IRQ %d\n", irq);
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
disable_bigsur_l1irq(irq);
else
@@ -179,7 +166,7 @@
static void end_bigsur_irq(unsigned int irq)
{
- DPRINTK("end_bigsur_irq IRQ %d\n", irq);
+ pr_debug("end_bigsur_irq IRQ %d\n", irq);
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
enable_bigsur_l1irq(irq);
@@ -193,7 +180,7 @@
u8 mask;
u32 reg;
- DPRINTK("startup_bigsur_irq IRQ %d\n", irq);
+ pr_debug("startup_bigsur_irq IRQ %d\n", irq);
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
/* Enable the L1 IRQ */
@@ -218,7 +205,7 @@
static void shutdown_bigsur_irq(unsigned int irq)
{
- DPRINTK("shutdown_bigsur_irq IRQ %d\n", irq);
+ pr_debug("shutdown_bigsur_irq IRQ %d\n", irq);
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
disable_bigsur_l1irq(irq);
else
@@ -260,7 +247,7 @@
disable_bigsur_l1irq(irq);
return;
}
- DPRINTK("make_bigsur_l1isr: bad irq, %d\n", irq);
+ pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq);
return;
}
@@ -277,7 +264,7 @@
disable_bigsur_l2irq(irq);
return;
}
- DPRINTK("make_bigsur_l2isr: bad irq, %d\n", irq);
+ pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq);
return;
}
diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c
index dfeede9..9711c20 100644
--- a/arch/sh/boards/bigsur/setup.c
+++ b/arch/sh/boards/bigsur/setup.c
@@ -41,31 +41,7 @@
// Big Sur Init Routines
/*===========================================================*/
-const char *get_system_type(void)
-{
- return "Big Sur";
-}
-
-/*
- * The Machine Vector
- */
-extern void heartbeat_bigsur(void);
-extern void init_bigsur_IRQ(void);
-
-struct sh_machine_vector mv_bigsur __initmv = {
- .mv_nr_irqs = NR_IRQS, // Defined in <asm/irq.h>
-
- .mv_isa_port2addr = bigsur_isa_port2addr,
- .mv_irq_demux = bigsur_irq_demux,
-
- .mv_init_irq = init_bigsur_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_bigsur,
-#endif
-};
-ALIAS_MV(bigsur)
-
-int __init platform_setup(void)
+static void __init bigsur_setup(char **cmdline_p)
{
/* Mask all 2nd level IRQ's */
outb(-1,BIGSUR_IMR0);
@@ -89,7 +65,24 @@
outw(1, BIGSUR_ETHR+0xe);
/* set the IO port to BIGSUR_ETHER_IOPORT */
outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2);
-
- return 0;
}
+/*
+ * The Machine Vector
+ */
+extern void heartbeat_bigsur(void);
+extern void init_bigsur_IRQ(void);
+
+struct sh_machine_vector mv_bigsur __initmv = {
+ .mv_name = "Big Sur",
+ .mv_setup = bigsur_setup,
+
+ .mv_isa_port2addr = bigsur_isa_port2addr,
+ .mv_irq_demux = bigsur_irq_demux,
+
+ .mv_init_irq = init_bigsur_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_bigsur,
+#endif
+};
+ALIAS_MV(bigsur)
diff --git a/arch/sh/boards/cat68701/Makefile b/arch/sh/boards/cat68701/Makefile
deleted file mode 100644
index 52c1de0..0000000
--- a/arch/sh/boards/cat68701/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the CAT-68701 specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
-
diff --git a/arch/sh/boards/cat68701/irq.c b/arch/sh/boards/cat68701/irq.c
deleted file mode 100644
index f9a6d18..0000000
--- a/arch/sh/boards/cat68701/irq.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/arch/sh/boards/cat68701/irq.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * 2001 Yutaro Ebihara
- *
- * Setup routines for A-ONE Corp CAT-68701 SH7708 Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/irq.h>
-
-int cat68701_irq_demux(int irq)
-{
- if(irq==13) return 14;
- if(irq==7) return 10;
- return irq;
-}
-
-void init_cat68701_IRQ()
-{
- make_imask_irq(10);
- make_imask_irq(14);
-}
diff --git a/arch/sh/boards/cat68701/setup.c b/arch/sh/boards/cat68701/setup.c
deleted file mode 100644
index 90e5175..0000000
--- a/arch/sh/boards/cat68701/setup.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * linux/arch/sh/boards/cat68701/setup.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- * 2001 Yutaro Ebihara
- *
- * Setup routines for A-ONE Corp CAT-68701 SH7708 Board
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/io.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-
-const char *get_system_type(void)
-{
- return "CAT-68701";
-}
-
-#ifdef CONFIG_HEARTBEAT
-void heartbeat_cat68701()
-{
- static unsigned int cnt = 0, period = 0 , bit = 0;
- cnt += 1;
- if (cnt < period) {
- return;
- }
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if(bit){ bit=0; }else{ bit=1; }
- outw(bit<<15,0x3fe);
-}
-#endif /* CONFIG_HEARTBEAT */
-
-unsigned long cat68701_isa_port2addr(unsigned long offset)
-{
- /* CompactFlash (IDE) */
- if (((offset >= 0x1f0) && (offset <= 0x1f7)) || (offset==0x3f6))
- return 0xba000000 + offset;
-
- /* INPUT PORT */
- if ((offset >= 0x3fc) && (offset <= 0x3fd))
- return 0xb4007000 + offset;
-
- /* OUTPUT PORT */
- if ((offset >= 0x3fe) && (offset <= 0x3ff))
- return 0xb4007400 + offset;
-
- return offset + 0xb4000000; /* other I/O (EREA 5)*/
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_cat68701 __initmv = {
- .mv_nr_irqs = 32,
- .mv_isa_port2addr = cat68701_isa_port2addr,
- .mv_irq_demux = cat68701_irq_demux,
-
- .mv_init_irq = init_cat68701_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_cat68701,
-#endif
-};
-ALIAS_MV(cat68701)
-
-int __init platform_setup(void)
-{
- /* dummy read erea5 (CS8900A) */
-}
-
diff --git a/arch/sh/boards/cqreek/Makefile b/arch/sh/boards/cqreek/Makefile
deleted file mode 100644
index 1a788a8..0000000
--- a/arch/sh/boards/cqreek/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the CqREEK specific parts of the kernel
-#
-
-obj-y := setup.o irq.o
-
diff --git a/arch/sh/boards/cqreek/irq.c b/arch/sh/boards/cqreek/irq.c
deleted file mode 100644
index 2955adc..0000000
--- a/arch/sh/boards/cqreek/irq.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* $Id: irq.c,v 1.1.2.4 2002/11/04 20:33:56 lethal Exp $
- *
- * arch/sh/boards/cqreek/irq.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- *
- * CqREEK IDE/ISA Bridge Support.
- *
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-
-#include <asm/cqreek/cqreek.h>
-#include <asm/io.h>
-#include <asm/io_generic.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/rtc.h>
-
-struct cqreek_irq_data {
- unsigned short mask_port; /* Port of Interrupt Mask Register */
- unsigned short stat_port; /* Port of Interrupt Status Register */
- unsigned short bit; /* Value of the bit */
-};
-static struct cqreek_irq_data cqreek_irq_data[NR_IRQS];
-
-static void disable_cqreek_irq(unsigned int irq)
-{
- unsigned long flags;
- unsigned short mask;
- unsigned short mask_port = cqreek_irq_data[irq].mask_port;
- unsigned short bit = cqreek_irq_data[irq].bit;
-
- local_irq_save(flags);
- /* Disable IRQ */
- mask = inw(mask_port) & ~bit;
- outw_p(mask, mask_port);
- local_irq_restore(flags);
-}
-
-static void enable_cqreek_irq(unsigned int irq)
-{
- unsigned long flags;
- unsigned short mask;
- unsigned short mask_port = cqreek_irq_data[irq].mask_port;
- unsigned short bit = cqreek_irq_data[irq].bit;
-
- local_irq_save(flags);
- /* Enable IRQ */
- mask = inw(mask_port) | bit;
- outw_p(mask, mask_port);
- local_irq_restore(flags);
-}
-
-static void mask_and_ack_cqreek(unsigned int irq)
-{
- unsigned short stat_port = cqreek_irq_data[irq].stat_port;
- unsigned short bit = cqreek_irq_data[irq].bit;
-
- disable_cqreek_irq(irq);
- /* Clear IRQ (it might be edge IRQ) */
- inw(stat_port);
- outw_p(bit, stat_port);
-}
-
-static void end_cqreek_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_cqreek_irq(irq);
-}
-
-static unsigned int startup_cqreek_irq(unsigned int irq)
-{
- enable_cqreek_irq(irq);
- return 0;
-}
-
-static void shutdown_cqreek_irq(unsigned int irq)
-{
- disable_cqreek_irq(irq);
-}
-
-static struct hw_interrupt_type cqreek_irq_type = {
- .typename = "CqREEK-IRQ",
- .startup = startup_cqreek_irq,
- .shutdown = shutdown_cqreek_irq,
- .enable = enable_cqreek_irq,
- .disable = disable_cqreek_irq,
- .ack = mask_and_ack_cqreek,
- .end = end_cqreek_irq
-};
-
-int cqreek_has_ide, cqreek_has_isa;
-
-/* XXX: This is just for test for my NE2000 ISA board
- What we really need is virtualized IRQ and demultiplexer like HP600 port */
-void __init init_cqreek_IRQ(void)
-{
- if (cqreek_has_ide) {
- cqreek_irq_data[14].mask_port = BRIDGE_IDE_INTR_MASK;
- cqreek_irq_data[14].stat_port = BRIDGE_IDE_INTR_STAT;
- cqreek_irq_data[14].bit = 1;
-
- irq_desc[14].chip = &cqreek_irq_type;
- irq_desc[14].status = IRQ_DISABLED;
- irq_desc[14].action = 0;
- irq_desc[14].depth = 1;
-
- disable_cqreek_irq(14);
- }
-
- if (cqreek_has_isa) {
- cqreek_irq_data[10].mask_port = BRIDGE_ISA_INTR_MASK;
- cqreek_irq_data[10].stat_port = BRIDGE_ISA_INTR_STAT;
- cqreek_irq_data[10].bit = (1 << 10);
-
- /* XXX: Err... we may need demultiplexer for ISA irq... */
- irq_desc[10].chip = &cqreek_irq_type;
- irq_desc[10].status = IRQ_DISABLED;
- irq_desc[10].action = 0;
- irq_desc[10].depth = 1;
-
- disable_cqreek_irq(10);
- }
-}
-
diff --git a/arch/sh/boards/cqreek/setup.c b/arch/sh/boards/cqreek/setup.c
deleted file mode 100644
index eff4ed9..0000000
--- a/arch/sh/boards/cqreek/setup.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* $Id: setup.c,v 1.5 2003/08/04 01:51:58 lethal Exp $
- *
- * arch/sh/kernel/setup_cqreek.c
- *
- * Copyright (C) 2000 Niibe Yutaka
- *
- * CqREEK IDE/ISA Bridge Support.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach/cqreek.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/io_generic.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-
-#define IDE_OFFSET 0xA4000000UL
-#define ISA_OFFSET 0xA4A00000UL
-
-const char *get_system_type(void)
-{
- return "CqREEK";
-}
-
-static unsigned long cqreek_port2addr(unsigned long port)
-{
- if (0x0000<=port && port<=0x0040)
- return IDE_OFFSET + port;
- if ((0x01f0<=port && port<=0x01f7) || port == 0x03f6)
- return IDE_OFFSET + port;
-
- return ISA_OFFSET + port;
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_cqreek __initmv = {
-#if defined(CONFIG_CPU_SH4)
- .mv_nr_irqs = 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
- .mv_nr_irqs = 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
- .mv_nr_irqs = 61,
-#endif
-
- .mv_init_irq = init_cqreek_IRQ,
-
- .mv_isa_port2addr = cqreek_port2addr,
-};
-ALIAS_MV(cqreek)
-
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
-{
- int i;
-/* udelay is not available at setup time yet... */
-#define DELAY() do {for (i=0; i<10000; i++) ctrl_inw(0xa0000000);} while(0)
-
- if ((inw (BRIDGE_FEATURE) & 1)) { /* We have IDE interface */
- outw_p(0, BRIDGE_IDE_INTR_LVL);
- outw_p(0, BRIDGE_IDE_INTR_MASK);
-
- outw_p(0, BRIDGE_IDE_CTRL);
- DELAY();
-
- outw_p(0x8000, BRIDGE_IDE_CTRL);
- DELAY();
-
- outw_p(0xffff, BRIDGE_IDE_INTR_STAT); /* Clear interrupt status */
- outw_p(0x0f-14, BRIDGE_IDE_INTR_LVL); /* Use 14 IPR */
- outw_p(1, BRIDGE_IDE_INTR_MASK); /* Enable interrupt */
- cqreek_has_ide=1;
- }
-
- if ((inw (BRIDGE_FEATURE) & 2)) { /* We have ISA interface */
- outw_p(0, BRIDGE_ISA_INTR_LVL);
- outw_p(0, BRIDGE_ISA_INTR_MASK);
-
- outw_p(0, BRIDGE_ISA_CTRL);
- DELAY();
- outw_p(0x8000, BRIDGE_ISA_CTRL);
- DELAY();
-
- outw_p(0xffff, BRIDGE_ISA_INTR_STAT); /* Clear interrupt status */
- outw_p(0x0f-10, BRIDGE_ISA_INTR_LVL); /* Use 10 IPR */
- outw_p(0xfff8, BRIDGE_ISA_INTR_MASK); /* Enable interrupt */
- cqreek_has_isa=1;
- }
-
- printk(KERN_INFO "CqREEK Setup (IDE=%d, ISA=%d)...done\n", cqreek_has_ide, cqreek_has_isa);
-}
-
diff --git a/arch/sh/boards/dmida/Makefile b/arch/sh/boards/dmida/Makefile
deleted file mode 100644
index 75999aa..0000000
--- a/arch/sh/boards/dmida/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the DataMyte Industrial Digital Assistant(tm) specific parts
-# of the kernel
-#
-
-obj-y := mach.o
-
diff --git a/arch/sh/boards/dmida/mach.c b/arch/sh/boards/dmida/mach.c
deleted file mode 100644
index d03a25f9..0000000
--- a/arch/sh/boards/dmida/mach.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/arch/sh/boards/dmida/mach.c
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- *
- * Derived from mach_hp600.c, which bore the message:
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the DataMyte Industrial Digital Assistant(tm).
- * See http://www.dmida.com
- *
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/irq.h>
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_dmida __initmv = {
- .mv_nr_irqs = HD64465_IRQ_BASE+HD64465_IRQ_NUM,
-
- .mv_inb = hd64465_inb,
- .mv_inw = hd64465_inw,
- .mv_inl = hd64465_inl,
- .mv_outb = hd64465_outb,
- .mv_outw = hd64465_outw,
- .mv_outl = hd64465_outl,
-
- .mv_inb_p = hd64465_inb_p,
- .mv_inw_p = hd64465_inw,
- .mv_inl_p = hd64465_inl,
- .mv_outb_p = hd64465_outb_p,
- .mv_outw_p = hd64465_outw,
- .mv_outl_p = hd64465_outl,
-
- .mv_insb = hd64465_insb,
- .mv_insw = hd64465_insw,
- .mv_insl = hd64465_insl,
- .mv_outsb = hd64465_outsb,
- .mv_outsw = hd64465_outsw,
- .mv_outsl = hd64465_outsl,
-
- .mv_irq_demux = hd64465_irq_demux,
-};
-ALIAS_MV(dmida)
-
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
index b10a6b1..5bf01f8 100644
--- a/arch/sh/boards/dreamcast/irq.c
+++ b/arch/sh/boards/dreamcast/irq.c
@@ -10,7 +10,6 @@
*/
#include <linux/irq.h>
-
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dreamcast/sysasic.h>
@@ -26,10 +25,10 @@
event.
There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event
- types can be found in include/asm-sh/dc_sysasic.h. There are three groups
- of EMRs that parallel the ESRs. Each EMR group corresponds to an IRQ, so
- 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928 triggers
- IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
+ types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
+ groups of EMRs that parallel the ESRs. Each EMR group corresponds to an
+ IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
+ triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
In the kernel, these events are mapped to virtual IRQs so that drivers can
respond to them as they would a normal interrupt. In order to keep this
@@ -57,29 +56,23 @@
/* Disable the hardware event by masking its bit in its EMR */
static inline void disable_systemasic_irq(unsigned int irq)
{
- unsigned long flags;
__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
__u32 mask;
- local_irq_save(flags);
mask = inl(emr);
mask &= ~(1 << EVENT_BIT(irq));
outl(mask, emr);
- local_irq_restore(flags);
}
/* Enable the hardware event by setting its bit in its EMR */
static inline void enable_systemasic_irq(unsigned int irq)
{
- unsigned long flags;
__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
__u32 mask;
- local_irq_save(flags);
mask = inl(emr);
mask |= (1 << EVENT_BIT(irq));
outl(mask, emr);
- local_irq_restore(flags);
}
/* Acknowledge a hardware event by writing its bit back to its ESR */
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c
index 379de16..b3a876a 100644
--- a/arch/sh/boards/dreamcast/rtc.c
+++ b/arch/sh/boards/dreamcast/rtc.c
@@ -1,4 +1,5 @@
-/* arch/sh/kernel/rtc-aica.c
+/*
+ * arch/sh/boards/dreamcast/rtc.c
*
* Dreamcast AICA RTC routines.
*
@@ -10,15 +11,12 @@
*/
#include <linux/time.h>
-
+#include <asm/rtc.h>
#include <asm/io.h>
-extern void (*rtc_get_time)(struct timespec *);
-extern int (*rtc_set_time)(const time_t);
-
/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
- seconds to get the standard Unix Epoch when getting the time, and add 20
- years when setting the time. */
+ seconds) to get the standard Unix Epoch when getting the time, and add
+ 20 years when setting the time. */
#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
@@ -32,7 +30,8 @@
*
* Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
*/
-void aica_rtc_gettimeofday(struct timespec *ts) {
+void aica_rtc_gettimeofday(struct timespec *ts)
+{
unsigned long val1, val2;
do {
@@ -55,7 +54,8 @@
*
* Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
*/
-int aica_rtc_settimeofday(const time_t secs) {
+int aica_rtc_settimeofday(const time_t secs)
+{
unsigned long val1, val2;
unsigned long adj = secs + TWENTY_YEARS;
@@ -75,7 +75,7 @@
void aica_time_init(void)
{
- rtc_get_time = aica_rtc_gettimeofday;
- rtc_set_time = aica_rtc_settimeofday;
+ rtc_sh_get_time = aica_rtc_gettimeofday;
+ rtc_sh_set_time = aica_rtc_settimeofday;
}
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
index 0027b80..f13017e 100644
--- a/arch/sh/boards/dreamcast/setup.c
+++ b/arch/sh/boards/dreamcast/setup.c
@@ -22,41 +22,21 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/device.h>
-
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/rtc.h>
#include <asm/machvec.h>
-#include <asm/machvec_init.h>
#include <asm/mach/sysasic.h>
extern struct hw_interrupt_type systemasic_int;
-/* XXX: Move this into it's proper header. */
-extern void (*board_time_init)(void);
extern void aica_time_init(void);
extern int gapspci_init(void);
extern int systemasic_irq_demux(int);
-void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, int);
+void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
int dreamcast_consistent_free(struct device *, size_t, void *, dma_addr_t);
-const char *get_system_type(void)
-{
- return "Sega Dreamcast";
-}
-
-struct sh_machine_vector mv_dreamcast __initmv = {
- .mv_nr_irqs = NR_IRQS,
-
- .mv_irq_demux = systemasic_irq_demux,
-
-#ifdef CONFIG_PCI
- .mv_consistent_alloc = dreamcast_consistent_alloc,
- .mv_consistent_free = dreamcast_consistent_free,
-#endif
-};
-ALIAS_MV(dreamcast)
-
-int __init platform_setup(void)
+static void __init dreamcast_setup(char **cmdline_p)
{
int i;
@@ -78,6 +58,16 @@
if (gapspci_init() < 0)
printk(KERN_WARNING "GAPSPCI was not detected.\n");
#endif
-
- return 0;
}
+
+struct sh_machine_vector mv_dreamcast __initmv = {
+ .mv_name = "Sega Dreamcast",
+ .mv_setup = dreamcast_setup,
+ .mv_irq_demux = systemasic_irq_demux,
+
+#ifdef CONFIG_PCI
+ .mv_consistent_alloc = dreamcast_consistent_alloc,
+ .mv_consistent_free = dreamcast_consistent_free,
+#endif
+};
+ALIAS_MV(dreamcast)
diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c
index 4b3ef16..902bc97 100644
--- a/arch/sh/boards/ec3104/setup.c
+++ b/arch/sh/boards/ec3104/setup.c
@@ -21,22 +21,36 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
-
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/machvec.h>
#include <asm/mach/ec3104.h>
-const char *get_system_type(void)
+static void __init ec3104_setup(char **cmdline_p)
{
- return "EC3104";
+ char str[8];
+ int i;
+
+ for (i=0; i<8; i++)
+ str[i] = ctrl_readb(EC3104_BASE + i);
+
+ for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
+ irq_desc[i].handler = &ec3104_int;
+
+ printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
+ str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
+
+ /* mask all interrupts. this should have been done by the boot
+ * loader for us but we want to be sure ... */
+ ctrl_writel(0xffffffff, EC3104_IMR);
}
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_ec3104 __initmv = {
+ .mv_name = "EC3104",
+ .mv_setup = ec3104_setup,
.mv_nr_irqs = 96,
.mv_inb = ec3104_inb,
@@ -48,31 +62,4 @@
.mv_irq_demux = ec3104_irq_demux,
};
-
ALIAS_MV(ec3104)
-
-int __init platform_setup(void)
-{
- char str[8];
- int i;
-
- if (0)
- return 0;
-
- for (i=0; i<8; i++)
- str[i] = ctrl_readb(EC3104_BASE + i);
-
- for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
- irq_desc[i].chip = &ec3104_int;
-
- printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
- str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
-
-
- /* mask all interrupts. this should have been done by the boot
- * loader for us but we want to be sure ... */
- ctrl_writel(0xffffffff, EC3104_IMR);
-
- return 0;
-}
-
diff --git a/arch/sh/boards/harp/Makefile b/arch/sh/boards/harp/Makefile
deleted file mode 100644
index eb753d3..0000000
--- a/arch/sh/boards/harp/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for STMicroelectronics board specific parts of the kernel
-#
-
-obj-y := irq.o setup.o mach.o led.o
-
-obj-$(CONFIG_PCI) += pcidma.o
-
diff --git a/arch/sh/boards/harp/irq.c b/arch/sh/boards/harp/irq.c
deleted file mode 100644
index 96bb41c..0000000
--- a/arch/sh/boards/harp/irq.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Looks after interrupts on the HARP board.
- *
- * Bases on the IPR irq system
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/harp/harp.h>
-
-
-#define NUM_EXTERNAL_IRQS 16
-
-// Early versions of the STB1 Overdrive required this nasty frig
-//#define INVERT_INTMASK_WRITES
-
-static void enable_harp_irq(unsigned int irq);
-static void disable_harp_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_harp_irq disable_harp_irq
-
-static void mask_and_ack_harp(unsigned int);
-static void end_harp_irq(unsigned int irq);
-
-static unsigned int startup_harp_irq(unsigned int irq)
-{
- enable_harp_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type harp_irq_type = {
- .typename = "Harp-IRQ",
- .startup = startup_harp_irq,
- .shutdown = shutdown_harp_irq,
- .enable = enable_harp_irq,
- .disable = disable_harp_irq,
- .ack = mask_and_ack_harp,
- .end = end_harp_irq
-};
-
-static void disable_harp_irq(unsigned int irq)
-{
- unsigned val, flags;
- unsigned maskReg;
- unsigned mask;
- int pri;
-
- if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
- return;
-
- pri = 15 - irq;
-
- if (pri < 8) {
- maskReg = EPLD_INTMASK0;
- } else {
- maskReg = EPLD_INTMASK1;
- pri -= 8;
- }
-
- local_irq_save(flags);
- mask = ctrl_inl(maskReg);
- mask &= (~(1 << pri));
-#if defined(INVERT_INTMASK_WRITES)
- mask ^= 0xff;
-#endif
- ctrl_outl(mask, maskReg);
- local_irq_restore(flags);
-}
-
-static void enable_harp_irq(unsigned int irq)
-{
- unsigned flags;
- unsigned maskReg;
- unsigned mask;
- int pri;
-
- if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
- return;
-
- pri = 15 - irq;
-
- if (pri < 8) {
- maskReg = EPLD_INTMASK0;
- } else {
- maskReg = EPLD_INTMASK1;
- pri -= 8;
- }
-
- local_irq_save(flags);
- mask = ctrl_inl(maskReg);
-
-
- mask |= (1 << pri);
-
-#if defined(INVERT_INTMASK_WRITES)
- mask ^= 0xff;
-#endif
- ctrl_outl(mask, maskReg);
-
- local_irq_restore(flags);
-}
-
-/* This functions sets the desired irq handler to be an overdrive type */
-static void __init make_harp_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &harp_irq_type;
- disable_harp_irq(irq);
-}
-
-static void mask_and_ack_harp(unsigned int irq)
-{
- disable_harp_irq(irq);
-}
-
-static void end_harp_irq(unsigned int irq)
-{
- enable_harp_irq(irq);
-}
-
-void __init init_harp_irq(void)
-{
- int i;
-
-#if !defined(INVERT_INTMASK_WRITES)
- // On the harp these are set to enable an interrupt
- ctrl_outl(0x00, EPLD_INTMASK0);
- ctrl_outl(0x00, EPLD_INTMASK1);
-#else
- // On the Overdrive the data is inverted before being stored in the reg
- ctrl_outl(0xff, EPLD_INTMASK0);
- ctrl_outl(0xff, EPLD_INTMASK1);
-#endif
-
- for (i = 0; i < NUM_EXTERNAL_IRQS; i++) {
- make_harp_irq(i);
- }
-}
diff --git a/arch/sh/boards/harp/led.c b/arch/sh/boards/harp/led.c
deleted file mode 100644
index aeb7b39..0000000
--- a/arch/sh/boards/harp/led.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/arch/sh/stboards/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains ST40STB1 HARP and compatible code.
- */
-
-#include <asm/io.h>
-#include <asm/harp/harp.h>
-
-/* Harp: Flash LD10 (front pannel) connected to EPLD (IC8) */
-/* Overdrive: Flash LD1 (front panel) connected to EPLD (IC4) */
-/* Works for HARP and overdrive */
-static void mach_led(int position, int value)
-{
- if (value) {
- ctrl_outl(EPLD_LED_ON, EPLD_LED);
- } else {
- ctrl_outl(EPLD_LED_OFF, EPLD_LED);
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void heartbeat_harp(void)
-{
- static unsigned cnt = 0, period = 0, dist = 0;
-
- if (cnt == 0 || cnt == dist)
- mach_led( -1, 1);
- else if (cnt == 7 || cnt == dist+7)
- mach_led( -1, 0);
-
- if (++cnt > period) {
- cnt = 0;
- /* The hyperbolic function below modifies the heartbeat period
- * length in dependency of the current (5min) load. It goes
- * through the points f(0)=126, f(1)=86, f(5)=51,
- * f(inf)->30. */
- period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
- dist = period / 4;
- }
-}
-#endif
diff --git a/arch/sh/boards/harp/mach.c b/arch/sh/boards/harp/mach.c
deleted file mode 100644
index a946dd1..0000000
--- a/arch/sh/boards/harp/mach.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/sh/boards/harp/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the STMicroelectronics STB1 HARP and compatible boards
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-#include <asm/hd64465/io.h>
-#include <asm/hd64465/hd64465.h>
-
-void setup_harp(void);
-void init_harp_irq(void);
-void heartbeat_harp(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_harp __initmv = {
- .mv_nr_irqs = 89 + HD64465_IRQ_NUM,
-
- .mv_inb = hd64465_inb,
- .mv_inw = hd64465_inw,
- .mv_inl = hd64465_inl,
- .mv_outb = hd64465_outb,
- .mv_outw = hd64465_outw,
- .mv_outl = hd64465_outl,
-
- .mv_inb_p = hd64465_inb_p,
- .mv_inw_p = hd64465_inw,
- .mv_inl_p = hd64465_inl,
- .mv_outb_p = hd64465_outb_p,
- .mv_outw_p = hd64465_outw,
- .mv_outl_p = hd64465_outl,
-
- .mv_insb = hd64465_insb,
- .mv_insw = hd64465_insw,
- .mv_insl = hd64465_insl,
- .mv_outsb = hd64465_outsb,
- .mv_outsw = hd64465_outsw,
- .mv_outsl = hd64465_outsl,
-
- .mv_isa_port2addr = hd64465_isa_port2addr,
-
-#ifdef CONFIG_PCI
- .mv_init_irq = init_harp_irq,
-#endif
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_harp,
-#endif
-};
-
-ALIAS_MV(harp)
diff --git a/arch/sh/boards/harp/pcidma.c b/arch/sh/boards/harp/pcidma.c
deleted file mode 100644
index 4753113..0000000
--- a/arch/sh/boards/harp/pcidma.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Dynamic DMA mapping support.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-
-void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t * dma_handle)
-{
- void *ret;
- int gfp = GFP_ATOMIC;
-
- ret = (void *) __get_free_pages(gfp, get_order(size));
-
- if (ret != NULL) {
- /* Is it neccessary to do the memset? */
- memset(ret, 0, size);
- *dma_handle = virt_to_bus(ret);
- }
- /* We must flush the cache before we pass it on to the device */
- flush_cache_all();
- return P2SEGADDR(ret);
-}
-
-void pci_free_consistent(struct pci_dev *hwdev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- unsigned long p1addr=P1SEGADDR((unsigned long)vaddr);
-
- free_pages(p1addr, get_order(size));
-}
diff --git a/arch/sh/boards/harp/setup.c b/arch/sh/boards/harp/setup.c
deleted file mode 100644
index 886e450..0000000
--- a/arch/sh/boards/harp/setup.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * arch/sh/stboard/setup.c
- *
- * Copyright (C) 2001 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * STMicroelectronics ST40STB1 HARP and compatible support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/harp/harp.h>
-
-const char *get_system_type(void)
-{
- return "STB1 Harp";
-}
-
-/*
- * Initialize the board
- */
-int __init platform_setup(void)
-{
-#ifdef CONFIG_SH_STB1_HARP
- unsigned long ic8_version, ic36_version;
-
- ic8_version = ctrl_inl(EPLD_REVID2);
- ic36_version = ctrl_inl(EPLD_REVID1);
-
- printk("STMicroelectronics STB1 HARP initialisaton\n");
- printk("EPLD versions: IC8: %d.%02d, IC36: %d.%02d\n",
- (ic8_version >> 4) & 0xf, ic8_version & 0xf,
- (ic36_version >> 4) & 0xf, ic36_version & 0xf);
-#elif defined(CONFIG_SH_STB1_OVERDRIVE)
- unsigned long version;
-
- version = ctrl_inl(EPLD_REVID);
-
- printk("STMicroelectronics STB1 Overdrive initialisaton\n");
- printk("EPLD version: %d.%02d\n",
- (version >> 4) & 0xf, version & 0xf);
-#else
-#error Undefined machine
-#endif
-
- /* Currently all STB1 chips have problems with the sleep instruction,
- * so disable it here.
- */
- disable_hlt();
-
- return 0;
-}
-
-/*
- * pcibios_map_platform_irq
- *
- * This is board specific and returns the IRQ for a given PCI device.
- * It is used by the PCI code (arch/sh/kernel/st40_pci*)
- *
- */
-
-#define HARP_PCI_IRQ 1
-#define HARP_BRIDGE_IRQ 2
-#define OVERDRIVE_SLOT0_IRQ 0
-
-
-int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- switch (slot) {
-#ifdef CONFIG_SH_STB1_HARP
- case 2: /*This is the PCI slot on the */
- return HARP_PCI_IRQ;
- case 1: /* this is the bridge */
- return HARP_BRIDGE_IRQ;
-#elif defined(CONFIG_SH_STB1_OVERDRIVE)
- case 1:
- case 2:
- case 3:
- return slot - 1;
-#else
-#error Unknown board
-#endif
- default:
- return -1;
- }
-}
-
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile
index 927fe0a..ff1b7f5 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/hp6xx/Makefile
@@ -2,5 +2,6 @@
# Makefile for the HP6xx specific parts of the kernel
#
-obj-y := mach.o setup.o
-
+obj-y := setup.o
+obj-$(CONFIG_PM) += pm.o pm_wakeup.o
+obj-$(CONFIG_APM) += hp6xx_apm.o
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c
new file mode 100644
index 0000000..ad0e712
--- /dev/null
+++ b/arch/sh/boards/hp6xx/hp6xx_apm.c
@@ -0,0 +1,123 @@
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/apm_bios.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/apm.h>
+#include <asm/adc.h>
+#include <asm/hp6xx/hp6xx.h>
+
+#define SH7709_PGDR 0xa400012c
+
+#define APM_CRITICAL 10
+#define APM_LOW 30
+
+#define HP680_BATTERY_MAX 875
+#define HP680_BATTERY_MIN 600
+#define HP680_BATTERY_AC_ON 900
+
+#define MODNAME "hp6x0_apm"
+
+static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length)
+{
+ u8 pgdr;
+ char *p;
+ int battery_status;
+ int battery_flag;
+ int ac_line_status;
+ int time_units = APM_BATTERY_LIFE_UNKNOWN;
+
+ int battery = adc_single(ADC_CHANNEL_BATTERY);
+ int backup = adc_single(ADC_CHANNEL_BACKUP);
+ int charging = adc_single(ADC_CHANNEL_CHARGE);
+ int percentage;
+
+ percentage = 100 * (battery - HP680_BATTERY_MIN) /
+ (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
+
+ ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
+ APM_AC_ONLINE : APM_AC_OFFLINE;
+
+ p = buf;
+
+ pgdr = ctrl_inb(SH7709_PGDR);
+ if (pgdr & PGDR_MAIN_BATTERY_OUT) {
+ battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
+ battery_flag = 0x80;
+ percentage = -1;
+ } else if (charging < 8 ) {
+ battery_status = APM_BATTERY_STATUS_CHARGING;
+ battery_flag = 0x08;
+ ac_line_status = 0xff;
+ } else if (percentage <= APM_CRITICAL) {
+ battery_status = APM_BATTERY_STATUS_CRITICAL;
+ battery_flag = 0x04;
+ } else if (percentage <= APM_LOW) {
+ battery_status = APM_BATTERY_STATUS_LOW;
+ battery_flag = 0x02;
+ } else {
+ battery_status = APM_BATTERY_STATUS_HIGH;
+ battery_flag = 0x01;
+ }
+
+ p += sprintf(p, "1.0 1.2 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
+ APM_32_BIT_SUPPORT,
+ ac_line_status,
+ battery_status,
+ battery_flag,
+ percentage,
+ time_units,
+ "min");
+ p += sprintf(p, "bat=%d backup=%d charge=%d\n",
+ battery, backup, charging);
+
+ return p - buf;
+}
+
+static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+ if (!apm_suspended)
+ apm_queue_event(APM_USER_SUSPEND);
+
+ return IRQ_HANDLED;
+}
+
+static int __init hp6x0_apm_init(void)
+{
+ int ret;
+
+ ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
+ SA_INTERRUPT, MODNAME, 0);
+ if (unlikely(ret < 0)) {
+ printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
+ HP680_BTN_IRQ);
+ return ret;
+ }
+
+ apm_get_info = hp6x0_apm_get_info;
+
+ return ret;
+}
+
+static void __exit hp6x0_apm_exit(void)
+{
+ free_irq(HP680_BTN_IRQ, 0);
+ apm_get_info = 0;
+}
+
+module_init(hp6x0_apm_init);
+module_exit(hp6x0_apm_exit);
+
+MODULE_AUTHOR("Adriy Skulysh");
+MODULE_DESCRIPTION("hp6xx Advanced Power Management");
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c
new file mode 100644
index 0000000..0e501bc
--- /dev/null
+++ b/arch/sh/boards/hp6xx/pm.c
@@ -0,0 +1,88 @@
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/hp6xx/hp6xx.h>
+#include <asm/cpu/dac.h>
+#include <asm/pm.h>
+
+#define STBCR 0xffffff82
+#define STBCR2 0xffffff88
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+ u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+ u8 scr;
+ u16 hd64461_stbcr;
+#endif
+
+ if (state != PM_SUSPEND_MEM)
+ return -EINVAL;
+
+#ifdef CONFIG_HD64461_ENABLER
+ outb(0, HD64461_PCC1CSCIER);
+
+ scr = inb(HD64461_PCC1SCR);
+ scr |= HD64461_PCCSCR_VCC1;
+ outb(scr, HD64461_PCC1SCR);
+
+ hd64461_stbcr = inw(HD64461_STBCR);
+ hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+ outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+ ctrl_outb(0x1f, DACR);
+
+ stbcr = ctrl_inb(STBCR);
+ ctrl_outb(0x01, STBCR);
+
+ stbcr2 = ctrl_inb(STBCR2);
+ ctrl_outb(0x7f , STBCR2);
+
+ outw(0xf07f, HD64461_SCPUCR);
+
+ pm_enter();
+
+ outw(0, HD64461_SCPUCR);
+ ctrl_outb(stbcr, STBCR);
+ ctrl_outb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+ hd64461_stbcr = inw(HD64461_STBCR);
+ hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+ outw(hd64461_stbcr, HD64461_STBCR);
+
+ outb(0x4c, HD64461_PCC1CSCIER);
+ outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+ return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops hp6x0_pm_ops = {
+ .pm_disk_mode = PM_DISK_FIRMWARE,
+ .enter = hp6x0_pm_enter,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+ pm_set_ops(&hp6x0_pm_ops);
+ return 0;
+}
+
+late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S
new file mode 100644
index 0000000..45e9bf0
--- /dev/null
+++ b/arch/sh/boards/hp6xx/pm_wakeup.S
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/cpu/mmu_context.h>
+
+#define k0 r0
+#define k1 r1
+#define k2 r2
+#define k3 r3
+#define k4 r4
+
+/*
+ * Kernel mode register usage:
+ * k0 scratch
+ * k1 scratch
+ * k2 scratch (Exception code)
+ * k3 scratch (Return address)
+ * k4 scratch
+ * k5 reserved
+ * k6 Global Interrupt Mask (0--15 << 4)
+ * k7 CURRENT_THREAD_INFO (pointer to current thread info)
+ */
+
+ENTRY(wakeup_start)
+! clear STBY bit
+ mov #-126, k2
+ and #127, k0
+ mov.b k0, @k2
+! enable refresh
+ mov.l 5f, k1
+ mov.w 6f, k0
+ mov.w k0, @k1
+! jump to handler
+ mov.l 2f, k2
+ mov.l 3f, k3
+ mov.l @k2, k2
+
+ mov.l 4f, k1
+ jmp @k1
+ nop
+
+ .align 2
+1: .long EXPEVT
+2: .long INTEVT
+3: .long ret_from_irq
+4: .long handle_exception
+5: .long 0xffffff68
+6: .word 0x0524
+
+ENTRY(wakeup_end)
+ nop
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index 71f3156..60ab17a 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -8,22 +8,22 @@
*
* Setup code for an HP680 (internal peripherials only)
*/
-
+#include <linux/types.h>
#include <linux/init.h>
-#include <asm/io.h>
#include <asm/hd64461.h>
+#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/hp6xx/hp6xx.h>
#include <asm/cpu/dac.h>
-const char *get_system_type(void)
-{
- return "HP6xx";
-}
+#define SCPCR 0xa4000116
+#define SCPDR 0xa4000136
-int __init platform_setup(void)
+static void __init hp6xx_setup(char **cmdline_p)
{
u8 v8;
u16 v;
+
v = inw(HD64461_STBCR);
v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
@@ -50,5 +50,51 @@
v8 &= ~DACR_DAE;
ctrl_outb(v8,DACR);
- return 0;
+ v8 = ctrl_inb(SCPDR);
+ v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+ v8 &= ~SCPDR_TS_SCAN_ENABLE;
+ ctrl_outb(v8, SCPDR);
+
+ v = ctrl_inw(SCPCR);
+ v &= ~SCPCR_TS_MASK;
+ v |= SCPCR_TS_ENABLE;
+ ctrl_outw(v, SCPCR);
}
+
+/*
+ * XXX: This is stupid, we should have a generic machine vector for the cchips
+ * and just wrap the platform setup code in to this, as it's the only thing
+ * that ends up being different.
+ */
+struct sh_machine_vector mv_hp6xx __initmv = {
+ .mv_name = "hp6xx",
+ .mv_setup = hp6xx_setup,
+ .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
+
+ .mv_inb = hd64461_inb,
+ .mv_inw = hd64461_inw,
+ .mv_inl = hd64461_inl,
+ .mv_outb = hd64461_outb,
+ .mv_outw = hd64461_outw,
+ .mv_outl = hd64461_outl,
+
+ .mv_inb_p = hd64461_inb_p,
+ .mv_inw_p = hd64461_inw,
+ .mv_inl_p = hd64461_inl,
+ .mv_outb_p = hd64461_outb_p,
+ .mv_outw_p = hd64461_outw,
+ .mv_outl_p = hd64461_outl,
+
+ .mv_insb = hd64461_insb,
+ .mv_insw = hd64461_insw,
+ .mv_insl = hd64461_insl,
+ .mv_outsb = hd64461_outsb,
+ .mv_outsw = hd64461_outsw,
+ .mv_outsl = hd64461_outsl,
+
+ .mv_readw = hd64461_readw,
+ .mv_writew = hd64461_writew,
+
+ .mv_irq_demux = hd64461_irq_demux,
+};
+ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile
new file mode 100644
index 0000000..89e4beb
--- /dev/null
+++ b/arch/sh/boards/landisk/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
+#
+
+obj-y := setup.o io.o irq.o rtc.o landisk_pwb.o
diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c
new file mode 100644
index 0000000..92498b4
--- /dev/null
+++ b/arch/sh/boards/landisk/io.c
@@ -0,0 +1,250 @@
+/*
+ * arch/sh/boards/landisk/io.c
+ *
+ * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for I-O Data Device, Inc. LANDISK.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_landisk.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+/*
+ * modifed by kogiidena
+ * 2005.03.03
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+extern void *area5_io_base; /* Area 5 I/O Base address */
+extern void *area6_io_base; /* Area 6 I/O Base address */
+
+static inline unsigned long port2adr(unsigned int port)
+{
+ if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+ if (port == 0x3f6)
+ return ((unsigned long)area5_io_base + 0x2c);
+ else
+ return ((unsigned long)area5_io_base + PA_PIDE_OFFSET +
+ ((port - 0x1f0) << 1));
+ else if ((0x170 <= port && port < 0x178) || port == 0x376)
+ if (port == 0x376)
+ return ((unsigned long)area6_io_base + 0x2c);
+ else
+ return ((unsigned long)area6_io_base + PA_SIDE_OFFSET +
+ ((port - 0x170) << 1));
+ else
+ maybebadio((unsigned long)port);
+
+ return port;
+}
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used w/o translation for
+ * compatibility.
+ */
+u8 landisk_inb(unsigned long port)
+{
+ if (PXSEG(port))
+ return ctrl_inb(port);
+ else if (is_pci_ioaddr(port))
+ return ctrl_inb(pci_ioaddr(port));
+
+ return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 landisk_inb_p(unsigned long port)
+{
+ u8 v;
+
+ if (PXSEG(port))
+ v = ctrl_inb(port);
+ else if (is_pci_ioaddr(port))
+ v = ctrl_inb(pci_ioaddr(port));
+ else
+ v = ctrl_inw(port2adr(port)) & 0xff;
+
+ ctrl_delay();
+
+ return v;
+}
+
+u16 landisk_inw(unsigned long port)
+{
+ if (PXSEG(port))
+ return ctrl_inw(port);
+ else if (is_pci_ioaddr(port))
+ return ctrl_inw(pci_ioaddr(port));
+ else
+ maybebadio(port);
+
+ return 0;
+}
+
+u32 landisk_inl(unsigned long port)
+{
+ if (PXSEG(port))
+ return ctrl_inl(port);
+ else if (is_pci_ioaddr(port))
+ return ctrl_inl(pci_ioaddr(port));
+ else
+ maybebadio(port);
+
+ return 0;
+}
+
+void landisk_outb(u8 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outb(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outb(value, pci_ioaddr(port));
+ else
+ ctrl_outw(value, port2adr(port));
+}
+
+void landisk_outb_p(u8 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outb(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outb(value, pci_ioaddr(port));
+ else
+ ctrl_outw(value, port2adr(port));
+ ctrl_delay();
+}
+
+void landisk_outw(u16 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outw(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outw(value, pci_ioaddr(port));
+ else
+ maybebadio(port);
+}
+
+void landisk_outl(u32 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outl(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outl(value, pci_ioaddr(port));
+ else
+ maybebadio(port);
+}
+
+void landisk_insb(unsigned long port, void *dst, unsigned long count)
+{
+ volatile u16 *p;
+ u8 *buf = dst;
+
+ if (PXSEG(port)) {
+ while (count--)
+ *buf++ = *(volatile u8 *)port;
+ } else if (is_pci_ioaddr(port)) {
+ volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+ while (count--)
+ *buf++ = *bp;
+ } else {
+ p = (volatile u16 *)port2adr(port);
+ while (count--)
+ *buf++ = *p & 0xff;
+ }
+}
+
+void landisk_insw(unsigned long port, void *dst, unsigned long count)
+{
+ volatile u16 *p;
+ u16 *buf = dst;
+
+ if (PXSEG(port))
+ p = (volatile u16 *)port;
+ else if (is_pci_ioaddr(port))
+ p = (volatile u16 *)pci_ioaddr(port);
+ else
+ p = (volatile u16 *)port2adr(port);
+ while (count--)
+ *buf++ = *p;
+}
+
+void landisk_insl(unsigned long port, void *dst, unsigned long count)
+{
+ u32 *buf = dst;
+
+ if (is_pci_ioaddr(port)) {
+ volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+ while (count--)
+ *buf++ = *p;
+ } else
+ maybebadio(port);
+}
+
+void landisk_outsb(unsigned long port, const void *src, unsigned long count)
+{
+ volatile u16 *p;
+ const u8 *buf = src;
+
+ if (PXSEG(port))
+ while (count--)
+ ctrl_outb(*buf++, port);
+ else if (is_pci_ioaddr(port)) {
+ volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+ while (count--)
+ *bp = *buf++;
+ } else {
+ p = (volatile u16 *)port2adr(port);
+ while (count--)
+ *p = *buf++;
+ }
+}
+
+void landisk_outsw(unsigned long port, const void *src, unsigned long count)
+{
+ volatile u16 *p;
+ const u16 *buf = src;
+
+ if (PXSEG(port))
+ p = (volatile u16 *)port;
+ else if (is_pci_ioaddr(port))
+ p = (volatile u16 *)pci_ioaddr(port);
+ else
+ p = (volatile u16 *)port2adr(port);
+
+ while (count--)
+ *p = *buf++;
+}
+
+void landisk_outsl(unsigned long port, const void *src, unsigned long count)
+{
+ const u32 *buf = src;
+
+ if (is_pci_ioaddr(port)) {
+ volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+ while (count--)
+ *p = *buf++;
+ } else
+ maybebadio(port);
+}
+
+void __iomem *landisk_ioport_map(unsigned long port, unsigned int size)
+{
+ if (PXSEG(port))
+ return (void __iomem *)port;
+ else if (is_pci_ioaddr(port))
+ return (void __iomem *)pci_ioaddr(port);
+
+ return (void __iomem *)port2adr(port);
+}
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
new file mode 100644
index 0000000..a006d64
--- /dev/null
+++ b/arch/sh/boards/landisk/irq.c
@@ -0,0 +1,99 @@
+/*
+ * arch/sh/boards/landisk/irq.c
+ *
+ * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for I-O Data Device, Inc. LANDISK.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_landisk.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+/*
+ * modified by kogiidena
+ * 2005.03.03
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/landisk/iodata_landisk.h>
+
+static void enable_landisk_irq(unsigned int irq);
+static void disable_landisk_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_landisk_irq disable_landisk_irq
+
+static void ack_landisk_irq(unsigned int irq);
+static void end_landisk_irq(unsigned int irq);
+
+static unsigned int startup_landisk_irq(unsigned int irq)
+{
+ enable_landisk_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void disable_landisk_irq(unsigned int irq)
+{
+ unsigned char val;
+ unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+
+ /* Set the priority in IPR to 0 */
+ val = ctrl_inb(PA_IMASK);
+ val &= mask;
+ ctrl_outb(val, PA_IMASK);
+}
+
+static void enable_landisk_irq(unsigned int irq)
+{
+ unsigned char val;
+ unsigned char value = (0x01 << (irq - 5));
+
+ /* Set priority in IPR back to original value */
+ val = ctrl_inb(PA_IMASK);
+ val |= value;
+ ctrl_outb(val, PA_IMASK);
+}
+
+static void ack_landisk_irq(unsigned int irq)
+{
+ disable_landisk_irq(irq);
+}
+
+static void end_landisk_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ enable_landisk_irq(irq);
+}
+
+static struct hw_interrupt_type landisk_irq_type = {
+ .typename = "LANDISK IRQ",
+ .startup = startup_landisk_irq,
+ .shutdown = shutdown_landisk_irq,
+ .enable = enable_landisk_irq,
+ .disable = disable_landisk_irq,
+ .ack = ack_landisk_irq,
+ .end = end_landisk_irq
+};
+
+static void make_landisk_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &landisk_irq_type;
+ disable_landisk_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+ int i;
+
+ for (i = 5; i < 14; i++)
+ make_landisk_irq(i);
+}
diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c
new file mode 100644
index 0000000..e75cb57
--- /dev/null
+++ b/arch/sh/boards/landisk/landisk_pwb.c
@@ -0,0 +1,348 @@
+/*
+ * arch/sh/boards/landisk/landisk_pwb.c -- driver for the Power control switch.
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ *
+ * LED control drive function added by kogiidena
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/major.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/landisk/iodata_landisk.h>
+
+#define SHUTDOWN_BTN_MINOR 1 /* Shutdown button device minor no. */
+#define LED_MINOR 21 /* LED minor no. */
+#define BTN_MINOR 22 /* BUTTON minor no. */
+#define GIO_MINOR 40 /* GIO minor no. */
+
+static int openCnt;
+static int openCntLED;
+static int openCntGio;
+static int openCntBtn;
+static int landisk_btn;
+static int landisk_btnctrlpid;
+/*
+ * Functions prototypes
+ */
+
+static int gio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+ unsigned long arg);
+
+static int swdrv_open(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ filp->private_data = (void *)minor;
+
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ if (openCnt > 0) {
+ return -EALREADY;
+ } else {
+ openCnt++;
+ return 0;
+ }
+ } else if (minor == LED_MINOR) {
+ if (openCntLED > 0) {
+ return -EALREADY;
+ } else {
+ openCntLED++;
+ return 0;
+ }
+ } else if (minor == BTN_MINOR) {
+ if (openCntBtn > 0) {
+ return -EALREADY;
+ } else {
+ openCntBtn++;
+ return 0;
+ }
+ } else if (minor == GIO_MINOR) {
+ if (openCntGio > 0) {
+ return -EALREADY;
+ } else {
+ openCntGio++;
+ return 0;
+ }
+ }
+ return -ENOENT;
+
+}
+
+static int swdrv_close(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = MINOR(inode->i_rdev);
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ openCnt--;
+ } else if (minor == LED_MINOR) {
+ openCntLED--;
+ } else if (minor == BTN_MINOR) {
+ openCntBtn--;
+ } else if (minor == GIO_MINOR) {
+ openCntGio--;
+ }
+ return 0;
+}
+
+static int swdrv_read(struct file *filp, char *buff, size_t count,
+ loff_t * ppos)
+{
+ int minor;
+ minor = (int)(filp->private_data);
+
+ if (!access_ok(VERIFY_WRITE, (void *)buff, count))
+ return -EFAULT;
+
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ if (landisk_btn & 0x10) {
+ put_user(1, buff);
+ return 1;
+ } else {
+ return 0;
+ }
+ }
+ return 0;
+}
+
+static int swdrv_write(struct file *filp, const char *buff, size_t count,
+ loff_t * ppos)
+{
+ int minor;
+ minor = (int)(filp->private_data);
+
+ if (minor == SHUTDOWN_BTN_MINOR) {
+ return count;
+ }
+ return count;
+}
+
+static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS)));
+ disable_irq(IRQ_BUTTON);
+ disable_irq(IRQ_POWER);
+ ctrl_outb(0x00, PA_PWRINT_CLR);
+
+ if (landisk_btnctrlpid != 0) {
+ kill_proc(landisk_btnctrlpid, SIGUSR1, 1);
+ landisk_btnctrlpid = 0;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct file_operations swdrv_fops = {
+ .read = swdrv_read, /* read */
+ .write = swdrv_write, /* write */
+ .open = swdrv_open, /* open */
+ .release = swdrv_close, /* release */
+ .ioctl = gio_ioctl, /* ioctl */
+
+};
+
+static char banner[] __initdata =
+ KERN_INFO "LANDISK and USL-5P Button, LED and GIO driver initialized\n";
+
+int __init swdrv_init(void)
+{
+ int error;
+
+ printk("%s", banner);
+
+ openCnt = 0;
+ openCntLED = 0;
+ openCntBtn = 0;
+ openCntGio = 0;
+ landisk_btn = 0;
+ landisk_btnctrlpid = 0;
+
+ if ((error = register_chrdev(SHUTDOWN_BTN_MAJOR, "swdrv", &swdrv_fops))) {
+ printk(KERN_ERR
+ "Button, LED and GIO driver:Couldn't register driver, error=%d\n",
+ error);
+ return 1;
+ }
+
+ if (request_irq(IRQ_POWER, sw_interrupt, 0, "SHUTDOWNSWITCH", NULL)) {
+ printk(KERN_ERR "Unable to get IRQ 11.\n");
+ return 1;
+ }
+ if (request_irq(IRQ_BUTTON, sw_interrupt, 0, "USL-5P BUTTON", NULL)) {
+ printk(KERN_ERR "Unable to get IRQ 12.\n");
+ return 1;
+ }
+ ctrl_outb(0x00, PA_PWRINT_CLR);
+
+ return 0;
+}
+
+module_init(swdrv_init);
+
+/*
+ * gio driver
+ *
+ */
+
+#include <asm/landisk/gio.h>
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ int minor;
+ unsigned int data, mask;
+ static unsigned int addr = 0;
+
+ minor = (int)(filp->private_data);
+
+ /* access control */
+ if (minor == GIO_MINOR) {
+ ;
+ } else if (minor == LED_MINOR) {
+ if (((cmd & 0x0ff) >= 9) && ((cmd & 0x0ff) < 20)) {
+ ;
+ } else {
+ return -EINVAL;
+ }
+ } else if (minor == BTN_MINOR) {
+ if (((cmd & 0x0ff) >= 20) && ((cmd & 0x0ff) < 30)) {
+ ;
+ } else {
+ return -EINVAL;
+ }
+ } else {
+ return -EINVAL;
+ }
+
+ if (cmd & 0x01) { /* write */
+ if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+ return -EFAULT;
+ }
+ }
+
+ switch (cmd) {
+ case GIODRV_IOCSGIOSETADDR: /* addres set */
+ addr = data;
+ break;
+
+ case GIODRV_IOCSGIODATA1: /* write byte */
+ ctrl_outb((unsigned char)(0x0ff & data), addr);
+ break;
+
+ case GIODRV_IOCSGIODATA2: /* write word */
+ if (addr & 0x01) {
+ return -EFAULT;
+ }
+ ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+ break;
+
+ case GIODRV_IOCSGIODATA4: /* write long */
+ if (addr & 0x03) {
+ return -EFAULT;
+ }
+ ctrl_outl(data, addr);
+ break;
+
+ case GIODRV_IOCGGIODATA1: /* read byte */
+ data = ctrl_inb(addr);
+ break;
+
+ case GIODRV_IOCGGIODATA2: /* read word */
+ if (addr & 0x01) {
+ return -EFAULT;
+ }
+ data = ctrl_inw(addr);
+ break;
+
+ case GIODRV_IOCGGIODATA4: /* read long */
+ if (addr & 0x03) {
+ return -EFAULT;
+ }
+ data = ctrl_inl(addr);
+ break;
+ case GIODRV_IOCSGIO_LED: /* write */
+ mask = ((data & 0x00ffffff) << 8)
+ | ((data & 0x0000ffff) << 16)
+ | ((data & 0x000000ff) << 24);
+ landisk_ledparam = data & (~mask);
+ if (landisk_arch == 0) { /* arch == landisk */
+ landisk_ledparam &= 0x03030303;
+ mask = (~(landisk_ledparam >> 22)) & 0x000c;
+ landisk_ledparam |= mask;
+ } else { /* arch == usl-5p */
+ mask = (landisk_ledparam >> 24) & 0x0001;
+ landisk_ledparam |= mask;
+ landisk_ledparam &= 0x007f7f7f;
+ }
+ landisk_ledparam |= 0x80;
+ break;
+ case GIODRV_IOCGGIO_LED: /* read */
+ data = landisk_ledparam;
+ if (landisk_arch == 0) { /* arch == landisk */
+ data &= 0x03030303;
+ } else { /* arch == usl-5p */
+ ;
+ }
+ data &= (~0x080);
+ break;
+ case GIODRV_IOCSGIO_BUZZER: /* write */
+ landisk_buzzerparam = data;
+ landisk_ledparam |= 0x80;
+ break;
+ case GIODRV_IOCGGIO_LANDISK: /* read */
+ data = landisk_arch & 0x01;
+ break;
+ case GIODRV_IOCGGIO_BTN: /* read */
+ data = (0x0ff & ctrl_inb(PA_PWRINT_CLR));
+ data <<= 8;
+ data |= (0x0ff & ctrl_inb(PA_IMASK));
+ data <<= 8;
+ data |= (0x0ff & landisk_btn);
+ data <<= 8;
+ data |= (0x0ff & (~ctrl_inb(PA_STATUS)));
+ break;
+ case GIODRV_IOCSGIO_BTNPID: /* write */
+ landisk_btnctrlpid = data;
+ landisk_btn = 0;
+ if (irq_desc[IRQ_BUTTON].depth) {
+ enable_irq(IRQ_BUTTON);
+ }
+ if (irq_desc[IRQ_POWER].depth) {
+ enable_irq(IRQ_POWER);
+ }
+ break;
+ case GIODRV_IOCGGIO_BTNPID: /* read */
+ data = landisk_btnctrlpid;
+ break;
+ default:
+ return -EFAULT;
+ break;
+ }
+
+ if ((cmd & 0x01) == 0) { /* read */
+ if (copy_to_user((int *)arg, &data, sizeof(int))) {
+ return -EFAULT;
+ }
+ }
+ return 0;
+}
diff --git a/arch/sh/boards/landisk/rtc.c b/arch/sh/boards/landisk/rtc.c
new file mode 100644
index 0000000..35ba726
--- /dev/null
+++ b/arch/sh/boards/landisk/rtc.c
@@ -0,0 +1,93 @@
+/*
+ * arch/sh/boards/landisk/rtc.c -- RTC support
+ *
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ */
+/*
+ * modifed by kogiidena
+ * 2005.09.16
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/bcd.h>
+#include <asm/rtc.h>
+
+extern spinlock_t rtc_lock;
+
+extern void
+rs5c313_set_cmos_time(unsigned int BCD_yr, unsigned int BCD_mon,
+ unsigned int BCD_day, unsigned int BCD_hr,
+ unsigned int BCD_min, unsigned int BCD_sec);
+
+extern unsigned long
+rs5c313_get_cmos_time(unsigned int *BCD_yr, unsigned int *BCD_mon,
+ unsigned int *BCD_day, unsigned int *BCD_hr,
+ unsigned int *BCD_min, unsigned int *BCD_sec);
+
+void landisk_rtc_gettimeofday(struct timespec *tv)
+{
+ unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ tv->tv_sec = rs5c313_get_cmos_time
+ (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
+ tv->tv_nsec = 0;
+ spin_unlock_irqrestore(&rtc_lock, flags);
+}
+
+int landisk_rtc_settimeofday(const time_t secs)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+ unsigned long flags;
+ unsigned long nowtime = secs;
+ unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+
+ rs5c313_get_cmos_time
+ (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
+ cmos_minutes = BCD_min;
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ rs5c313_set_cmos_time(BCD_yr, BCD_mon, BCD_day, BCD_hr,
+ real_minutes, real_seconds);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_time: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ return retval;
+}
+
+void landisk_time_init(void)
+{
+ rtc_sh_get_time = landisk_rtc_gettimeofday;
+ rtc_sh_set_time = landisk_rtc_settimeofday;
+}
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
new file mode 100644
index 0000000..127b9e0
--- /dev/null
+++ b/arch/sh/boards/landisk/setup.c
@@ -0,0 +1,177 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Modified for LANDISK by
+ * Atom Create Engineering Co., Ltd. 2002.
+ *
+ * modifed by kogiidena
+ * 2005.09.16
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/io.h>
+
+void landisk_time_init(void);
+void init_landisk_IRQ(void);
+
+int landisk_ledparam;
+int landisk_buzzerparam;
+int landisk_arch;
+
+/* cycle the led's in the clasic knightrider/sun pattern */
+static void heartbeat_landisk(void)
+{
+ static unsigned int cnt = 0, blink = 0x00, period = 25;
+ volatile u8 *p = (volatile u8 *)PA_LED;
+ char data;
+
+ if ((landisk_ledparam & 0x080) == 0)
+ return;
+
+ cnt += 1;
+
+ if (cnt < period)
+ return;
+
+ cnt = 0;
+ blink++;
+
+ data = (blink & 0x01) ? (landisk_ledparam >> 16) : 0;
+ data |= (blink & 0x02) ? (landisk_ledparam >> 8) : 0;
+ data |= landisk_ledparam;
+
+ /* buzzer */
+ if (landisk_buzzerparam & 0x1) {
+ data |= 0x80;
+ } else {
+ data &= 0x7f;
+ }
+ *p = data;
+
+ if (((landisk_ledparam & 0x007f7f00) == 0) &&
+ (landisk_buzzerparam == 0))
+ landisk_ledparam &= (~0x0080);
+
+ landisk_buzzerparam >>= 1;
+}
+
+static void landisk_power_off(void)
+{
+ ctrl_outb(0x01, PA_SHUTDOWN);
+}
+
+static void check_usl5p(void)
+{
+ volatile u8 *p = (volatile u8 *)PA_LED;
+ u8 tmp1, tmp2;
+
+ tmp1 = *p;
+ *p = 0x40;
+ tmp2 = *p;
+ *p = tmp1;
+
+ landisk_arch = (tmp2 == 0x40);
+ if (landisk_arch == 1) {
+ /* arch == usl-5p */
+ landisk_ledparam = 0x00000380;
+ landisk_ledparam |= (tmp1 & 0x07c);
+ } else {
+ /* arch == landisk */
+ landisk_ledparam = 0x02000180;
+ landisk_ledparam |= 0x04;
+ }
+}
+
+void *area5_io_base;
+void *area6_io_base;
+
+static int __init landisk_cf_init(void)
+{
+ pgprot_t prot;
+ unsigned long paddrbase, psize;
+
+ /* open I/O area window */
+ paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+ psize = PAGE_SIZE;
+ prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+ area5_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ if (!area5_io_base) {
+ printk("allocate_cf_area : can't open CF I/O window!\n");
+ return -ENOMEM;
+ }
+
+ paddrbase = virt_to_phys((void *)PA_AREA6_IO);
+ psize = PAGE_SIZE;
+ prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
+ area6_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ if (!area6_io_base) {
+ printk("allocate_cf_area : can't open HDD I/O window!\n");
+ return -ENOMEM;
+ }
+
+ printk(KERN_INFO "Allocate Area5/6 success.\n");
+
+ /* XXX : do we need attribute and common-memory area also? */
+
+ return 0;
+}
+
+static void __init landisk_setup(char **cmdline_p)
+{
+ device_initcall(landisk_cf_init);
+
+ landisk_buzzerparam = 0;
+ check_usl5p();
+
+ printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+
+ board_time_init = landisk_time_init;
+ pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_landisk __initmv = {
+ .mv_name = "LANDISK",
+ .mv_setup = landisk_setup,
+ .mv_nr_irqs = 72,
+ .mv_inb = landisk_inb,
+ .mv_inw = landisk_inw,
+ .mv_inl = landisk_inl,
+ .mv_outb = landisk_outb,
+ .mv_outw = landisk_outw,
+ .mv_outl = landisk_outl,
+ .mv_inb_p = landisk_inb_p,
+ .mv_inw_p = landisk_inw,
+ .mv_inl_p = landisk_inl,
+ .mv_outb_p = landisk_outb_p,
+ .mv_outw_p = landisk_outw,
+ .mv_outl_p = landisk_outl,
+ .mv_insb = landisk_insb,
+ .mv_insw = landisk_insw,
+ .mv_insl = landisk_insl,
+ .mv_outsb = landisk_outsb,
+ .mv_outsw = landisk_outsw,
+ .mv_outsl = landisk_outsl,
+ .mv_ioport_map = landisk_ioport_map,
+ .mv_init_irq = init_landisk_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_landisk,
+#endif
+};
+ALIAS_MV(landisk)
diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c
index a76c655..03b123a 100644
--- a/arch/sh/boards/mpc1211/rtc.c
+++ b/arch/sh/boards/mpc1211/rtc.c
@@ -130,7 +130,7 @@
void mpc1211_time_init(void)
{
- rtc_get_time = mpc1211_rtc_gettimeofday;
- rtc_set_time = mpc1211_rtc_settimeofday;
+ rtc_sh_get_time = mpc1211_rtc_gettimeofday;
+ rtc_sh_set_time = mpc1211_rtc_settimeofday;
}
diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c
index 2bfb221..8eb5d43 100644
--- a/arch/sh/boards/mpc1211/setup.c
+++ b/arch/sh/boards/mpc1211/setup.c
@@ -10,14 +10,12 @@
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/interrupt.h>
-
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mpc1211/mpc1211.h>
#include <asm/mpc1211/pci.h>
#include <asm/mpc1211/m1543c.h>
-
/* ALI15X3 SMBus address offsets */
#define SMBHSTSTS (0 + 0x3100)
#define SMBHSTCNT (1 + 0x3100)
@@ -50,11 +48,6 @@
#define ALI15X3_STS_TERM 0x80 /* terminated by abort */
#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */
-const char *get_system_type(void)
-{
- return "Interface MPC-1211(CTP/PCI/MPC-SH02)";
-}
-
static void __init pci_write_config(unsigned long busNo,
unsigned long devNo,
unsigned long fncNo,
@@ -80,9 +73,6 @@
static void disable_mpc1211_irq(unsigned int irq)
{
- unsigned long flags;
-
- save_and_cli(flags);
if( irq < 8) {
m_irq_mask |= (1 << irq);
outb(m_irq_mask,I8259_M_MR);
@@ -90,16 +80,11 @@
s_irq_mask |= (1 << (irq - 8));
outb(s_irq_mask,I8259_S_MR);
}
- restore_flags(flags);
}
static void enable_mpc1211_irq(unsigned int irq)
{
- unsigned long flags;
-
- save_and_cli(flags);
-
if( irq < 8) {
m_irq_mask &= ~(1 << irq);
outb(m_irq_mask,I8259_M_MR);
@@ -107,7 +92,6 @@
s_irq_mask &= ~(1 << (irq - 8));
outb(s_irq_mask,I8259_S_MR);
}
- restore_flags(flags);
}
static inline int mpc1211_irq_real(unsigned int irq)
@@ -131,10 +115,6 @@
static void mask_and_ack_mpc1211(unsigned int irq)
{
- unsigned long flags;
-
- save_and_cli(flags);
-
if(irq < 8) {
if(m_irq_mask & (1<<irq)){
if(!mpc1211_irq_real(irq)){
@@ -162,7 +142,6 @@
outb(0x60+(irq-8),I8259_S_CR); /* EOI */
outb(0x60+2,I8259_M_CR);
}
- restore_flags(flags);
}
static void end_mpc1211_irq(unsigned int irq)
@@ -219,7 +198,7 @@
return irq;
}
-void __init init_mpc1211_IRQ(void)
+static void __init init_mpc1211_IRQ(void)
{
int i;
/*
@@ -255,23 +234,12 @@
}
}
-/*
- Initialize the board
-*/
-
-
-static void delay (void)
-{
- volatile unsigned short tmp;
- tmp = *(volatile unsigned short *) 0xa0000000;
-}
-
-static void delay1000 (void)
+static void delay1000(void)
{
int i;
for (i=0; i<1000; i++)
- delay ();
+ ctrl_delay();
}
static int put_smb_blk(unsigned char *p, int address, int command, int no)
@@ -314,26 +282,10 @@
return 0;
}
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_mpc1211 __initmv = {
- .mv_nr_irqs = 48,
- .mv_irq_demux = mpc1211_irq_demux,
- .mv_init_irq = init_mpc1211_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_mpc1211,
-#endif
-};
-
-ALIAS_MV(mpc1211)
-
/* arch/sh/boards/mpc1211/rtc.c */
void mpc1211_time_init(void);
-int __init platform_setup(void)
+static void __init mpc1211_setup(char **cmdline_p)
{
unsigned char spd_buf[128];
@@ -357,3 +309,18 @@
return 0;
}
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_mpc1211 __initmv = {
+ .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
+ .mv_setup = mpc1211_setup,
+ .mv_nr_irqs = 48,
+ .mv_irq_demux = mpc1211_irq_demux,
+ .mv_init_irq = init_mpc1211_IRQ,
+
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_mpc1211,
+#endif
+};
+ALIAS_MV(mpc1211)
diff --git a/arch/sh/boards/overdrive/Makefile b/arch/sh/boards/overdrive/Makefile
deleted file mode 100644
index 245f03b..0000000
--- a/arch/sh/boards/overdrive/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the STMicroelectronics Overdrive specific parts of the kernel
-#
-
-obj-y := mach.o setup.o io.o irq.o led.o
-
-obj-$(CONFIG_PCI) += fpga.o galileo.o pcidma.o
-
diff --git a/arch/sh/boards/overdrive/fpga.c b/arch/sh/boards/overdrive/fpga.c
deleted file mode 100644
index 956c239..0000000
--- a/arch/sh/boards/overdrive/fpga.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file handles programming up the Altera Flex10K that interfaces to
- * the Galileo, and does the PS/2 keyboard and mouse
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-
-#include <asm/overdriver/gt64111.h>
-#include <asm/overdrive/overdrive.h>
-#include <asm/overdrive/fpga.h>
-
-#define FPGA_NotConfigHigh() (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT
-#define FPGA_NotConfigLow() (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK
-
-/* I need to find out what (if any) the real delay factor here is */
-/* The delay is definately not critical */
-#define long_delay() {int i;for(i=0;i<10000;i++);}
-#define short_delay() {int i;for(i=0;i<100;i++);}
-
-static void __init program_overdrive_fpga(const unsigned char *fpgacode,
- int size)
-{
- int timeout = 0;
- int i, j;
- unsigned char b;
- static volatile unsigned char *FPGA_ControlReg =
- (volatile unsigned char *) (OVERDRIVE_CTRL);
- static volatile unsigned char *FPGA_ProgramReg =
- (volatile unsigned char *) (FPGA_DCLK_ADDRESS);
-
- printk("FPGA: Commencing FPGA Programming\n");
-
- /* The PCI reset but MUST be low when programming the FPGA !!! */
- b = (*FPGA_ControlReg) & RESET_PCI_MASK;
-
- (*FPGA_ControlReg) = b;
-
- /* Prepare FPGA to program */
-
- FPGA_NotConfigHigh();
- long_delay();
-
- FPGA_NotConfigLow();
- short_delay();
-
- while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) {
- printk("FPGA: Waiting for NotStatus to go Low ... \n");
- }
-
- FPGA_NotConfigHigh();
-
- /* Wait for FPGA "ready to be programmed" signal */
- printk("FPGA: Waiting for NotStatus to go high (FPGA ready)... \n");
-
- for (timeout = 0;
- (((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0)
- && (timeout < FPGA_TIMEOUT)); timeout++);
-
- /* Check if timeout condition occured - i.e. an error */
-
- if (timeout == FPGA_TIMEOUT) {
- printk
- ("FPGA: Failed to program - Timeout waiting for notSTATUS to go high\n");
- return;
- }
-
- printk("FPGA: Copying data to FPGA ... %d bytes\n", size);
-
- /* Copy array to FPGA - bit at a time */
-
- for (i = 0; i < size; i++) {
- volatile unsigned w = 0;
-
- for (j = 0; j < 8; j++) {
- *FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01;
- short_delay();
- }
- if ((i & 0x3ff) == 0) {
- printk(".");
- }
- }
-
- /* Waiting for CONFDONE to go high - means the program is complete */
-
- for (timeout = 0;
- (((*FPGA_ProgramReg & FPGA_CONFDONE) == 0)
- && (timeout < FPGA_TIMEOUT)); timeout++) {
-
- *FPGA_ProgramReg = 0x0;
- long_delay();
- }
-
- if (timeout == FPGA_TIMEOUT) {
- printk
- ("FPGA: Failed to program - Timeout waiting for CONFDONE to go high\n");
- return;
- } else { /* Clock another 10 times - gets the device into a working state */
- for (i = 0; i < 10; i++) {
- *FPGA_ProgramReg = 0x0;
- short_delay();
- }
- }
-
- printk("FPGA: Programming complete\n");
-}
-
-
-static const unsigned char __init fpgacode[] = {
-#include "./overdrive.ttf" /* Code from maxplus2 compiler */
- , 0, 0
-};
-
-
-int __init init_overdrive_fpga(void)
-{
- program_overdrive_fpga(fpgacode, sizeof(fpgacode));
-
- return 0;
-}
diff --git a/arch/sh/boards/overdrive/galileo.c b/arch/sh/boards/overdrive/galileo.c
deleted file mode 100644
index 29e4897..0000000
--- a/arch/sh/boards/overdrive/galileo.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains the PCI routines required for the Galileo GT6411
- * PCI bridge as used on the Orion and Overdrive boards.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-
-#include <asm/overdrive/overdrive.h>
-#include <asm/overdrive/gt64111.h>
-
-
-/* After boot, we shift the Galileo registers so that they appear
- * in BANK6, along with IO space. This means we can have one contingous
- * lump of PCI address space without these registers appearing in the
- * middle of them
- */
-
-#define GT64111_BASE_ADDRESS 0xbb000000
-#define GT64111_IO_BASE_ADDRESS 0x1000
-/* The GT64111 registers appear at this address to the SH4 after reset */
-#define RESET_GT64111_BASE_ADDRESS 0xb4000000
-
-/* Macros used to access the Galileo registers */
-#define RESET_GT64111_REG(x) (RESET_GT64111_BASE_ADDRESS+x)
-#define GT64111_REG(x) (GT64111_BASE_ADDRESS+x)
-
-#define RESET_GT_WRITE(x,v) writel((v),RESET_GT64111_REG(x))
-
-#define RESET_GT_READ(x) readl(RESET_GT64111_REG(x))
-
-#define GT_WRITE(x,v) writel((v),GT64111_REG(x))
-#define GT_WRITE_BYTE(x,v) writeb((v),GT64111_REG(x))
-#define GT_WRITE_SHORT(x,v) writew((v),GT64111_REG(x))
-
-#define GT_READ(x) readl(GT64111_REG(x))
-#define GT_READ_BYTE(x) readb(GT64111_REG(x))
-#define GT_READ_SHORT(x) readw(GT64111_REG(x))
-
-
-/* Where the various SH banks start at */
-#define SH_BANK4_ADR 0xb0000000
-#define SH_BANK5_ADR 0xb4000000
-#define SH_BANK6_ADR 0xb8000000
-
-/* Masks out everything but lines 28,27,26 */
-#define BANK_SELECT_MASK 0x1c000000
-
-#define SH4_TO_BANK(x) ( (x) & BANK_SELECT_MASK)
-
-/*
- * Masks used for address conversaion. Bank 6 is used for IO and
- * has all the address bits zeroed by the FPGA. Special case this
- */
-#define MEMORY_BANK_MASK 0x1fffffff
-#define IO_BANK_MASK 0x03ffffff
-
-/* Mark bank 6 as the bank used for IO. You can change this in the FPGA code
- * if you want
- */
-#define IO_BANK_ADR PCI_GTIO_BASE
-
-/* Will select the correct mask to apply depending on the SH$ address */
-#define SELECT_BANK_MASK(x) \
- ( (SH4_TO_BANK(x)==SH4_TO_BANK(IO_BANK_ADR)) ? IO_BANK_MASK : MEMORY_BANK_MASK)
-
-/* Converts between PCI space and P2 region */
-#define SH4_TO_PCI(x) ((x)&SELECT_BANK_MASK(x))
-
-/* Various macros for figuring out what to stick in the Galileo registers.
- * You *really* don't want to figure this stuff out by hand, you always get
- * it wrong
- */
-#define GT_MEM_LO_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7ff)
-#define GT_MEM_HI_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7f)
-#define GT_MEM_SUB_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>20)&0xff)
-
-#define PROGRAM_HI_LO(block,a,s) \
- GT_WRITE(block##_LO_DEC_ADR,GT_MEM_LO_ADR(a));\
- GT_WRITE(block##_HI_DEC_ADR,GT_MEM_HI_ADR(a+s-1))
-
-#define PROGRAM_SUB_HI_LO(block,a,s) \
- GT_WRITE(block##_LO_DEC_ADR,GT_MEM_SUB_ADR(a));\
- GT_WRITE(block##_HI_DEC_ADR,GT_MEM_SUB_ADR(a+s-1))
-
-/* We need to set the size, and the offset register */
-
-#define GT_BAR_MASK(x) ((x)&~0xfff)
-
-/* Macro to set up the BAR in the Galileo. Essentially used for the DRAM */
-#define PROGRAM_GT_BAR(block,a,s) \
- GT_WRITE(PCI_##block##_BANK_SIZE,GT_BAR_MASK((s-1)));\
- write_config_to_galileo(PCI_CONFIG_##block##_BASE_ADR,\
- GT_BAR_MASK(a))
-
-#define DISABLE_GT_BAR(block) \
- GT_WRITE(PCI_##block##_BANK_SIZE,0),\
- GT_CONFIG_WRITE(PCI_CONFIG_##block##_BASE_ADR,\
- 0x80000000)
-
-/* Macros to disable things we are not going to use */
-#define DISABLE_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0x7ff);\
- GT_WRITE(x##_HI_DEC_ADR,0x00)
-
-#define DISABLE_SUB_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0xff);\
- GT_WRITE(x##_HI_DEC_ADR,0x00)
-
-static void __init reset_pci(void)
-{
- /* Set RESET_PCI bit high */
- writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL);
- udelay(250);
-
- /* Set RESET_PCI bit low */
- writeb(readb(OVERDRIVE_CTRL) & RESET_PCI_MASK, OVERDRIVE_CTRL);
- udelay(250);
-
- writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL);
- udelay(250);
-}
-
-static int write_config_to_galileo(int where, u32 val);
-#define GT_CONFIG_WRITE(where,val) write_config_to_galileo(where,val)
-
-#define ENABLE_PCI_DRAM
-
-
-#ifdef TEST_DRAM
-/* Test function to check out if the PCI DRAM is working OK */
-static int /* __init */ test_dram(unsigned *base, unsigned size)
-{
- unsigned *p = base;
- unsigned *end = (unsigned *) (((unsigned) base) + size);
- unsigned w;
-
- for (p = base; p < end; p++) {
- *p = 0xffffffff;
- if (*p != 0xffffffff) {
- printk("AAARGH -write failed!!! at %p is %x\n", p,
- *p);
- return 0;
- }
- *p = 0x0;
- if (*p != 0x0) {
- printk("AAARGH -write failed!!!\n");
- return 0;
- }
- }
-
- for (p = base; p < end; p++) {
- *p = (unsigned) p;
- if (*p != (unsigned) p) {
- printk("Failed at 0x%p, actually is 0x%x\n", p,
- *p);
- return 0;
- }
- }
-
- for (p = base; p < end; p++) {
- w = ((unsigned) p & 0xffff0000);
- *p = w | (w >> 16);
- }
-
- for (p = base; p < end; p++) {
- w = ((unsigned) p & 0xffff0000);
- w |= (w >> 16);
- if (*p != w) {
- printk
- ("Failed at 0x%p, should be 0x%x actually is 0x%x\n",
- p, w, *p);
- return 0;
- }
- }
-
- return 1;
-}
-#endif
-
-
-/* Function to set up and initialise the galileo. This sets up the BARS,
- * maps the DRAM into the address space etc,etc
- */
-int __init galileo_init(void)
-{
- reset_pci();
-
- /* Now shift the galileo regs into this block */
- RESET_GT_WRITE(INTERNAL_SPACE_DEC,
- GT_MEM_LO_ADR(GT64111_BASE_ADDRESS));
-
- /* Should have a sanity check here, that you can read back at the new
- * address what you just wrote
- */
-
- /* Disable decode for all regions */
- DISABLE_DECODE(RAS10);
- DISABLE_DECODE(RAS32);
- DISABLE_DECODE(CS20);
- DISABLE_DECODE(CS3);
- DISABLE_DECODE(PCI_IO);
- DISABLE_DECODE(PCI_MEM0);
- DISABLE_DECODE(PCI_MEM1);
-
- /* Disable all BARS */
- GT_WRITE(BAR_ENABLE_ADR, 0x1ff);
- DISABLE_GT_BAR(RAS10);
- DISABLE_GT_BAR(RAS32);
- DISABLE_GT_BAR(CS20);
- DISABLE_GT_BAR(CS3);
-
- /* Tell the BAR where the IO registers now are */
- GT_CONFIG_WRITE(PCI_CONFIG_INT_REG_IO_ADR,GT_BAR_MASK(
- (GT64111_IO_BASE_ADDRESS &
- IO_BANK_MASK)));
- /* set up a 112 Mb decode */
- PROGRAM_HI_LO(PCI_MEM0, SH_BANK4_ADR, 112 * 1024 * 1024);
-
- /* Set up a 32 MB io space decode */
- PROGRAM_HI_LO(PCI_IO, IO_BANK_ADR, 32 * 1024 * 1024);
-
-#ifdef ENABLE_PCI_DRAM
- /* Program up the DRAM configuration - there is DRAM only in bank 0 */
- /* Now set up the DRAM decode */
- PROGRAM_HI_LO(RAS10, PCI_DRAM_BASE, PCI_DRAM_SIZE);
- /* And the sub decode */
- PROGRAM_SUB_HI_LO(RAS0, PCI_DRAM_BASE, PCI_DRAM_SIZE);
-
- DISABLE_SUB_DECODE(RAS1);
-
- /* Set refresh rate */
- GT_WRITE(DRAM_BANK0_PARMS, 0x3f);
- GT_WRITE(DRAM_CFG, 0x100);
-
- /* we have to lob off the top bits rememeber!! */
- PROGRAM_GT_BAR(RAS10, SH4_TO_PCI(PCI_DRAM_BASE), PCI_DRAM_SIZE);
-
-#endif
-
- /* We are only interested in decoding RAS10 and the Galileo's internal
- * registers (as IO) on the PCI bus
- */
-#ifdef ENABLE_PCI_DRAM
- GT_WRITE(BAR_ENABLE_ADR, (~((1 << 8) | (1 << 3))) & 0x1ff);
-#else
- GT_WRITE(BAR_ENABLE_ADR, (~(1 << 3)) & 0x1ff);
-#endif
-
- /* Change the class code to host bridge, it actually powers up
- * as a memory controller
- */
- GT_CONFIG_WRITE(8, 0x06000011);
-
- /* Allow the galileo to master the PCI bus */
- GT_CONFIG_WRITE(PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- PCI_COMMAND_IO);
-
-
-#if 0
- printk("Testing PCI DRAM - ");
- if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) {
- printk("Passed\n");
- }else {
- printk("FAILED\n");
- }
-#endif
- return 0;
-
-}
-
-
-#define SET_CONFIG_BITS(bus,devfn,where)\
- ((1<<31) | ((bus) << 16) | ((devfn) << 8) | ((where) & ~3))
-
-#define CONFIG_CMD(dev, where) SET_CONFIG_BITS((dev)->bus->number,(dev)->devfn,where)
-
-/* This write to the galileo config registers, unlike the functions below, can
- * be used before the PCI subsystem has started up
- */
-static int __init write_config_to_galileo(int where, u32 val)
-{
- GT_WRITE(PCI_CFG_ADR, SET_CONFIG_BITS(0, 0, where));
-
- GT_WRITE(PCI_CFG_DATA, val);
- return 0;
-}
-
-/* We exclude the galileo and slot 31, the galileo because I don't know how to stop
- * the setup code shagging up the setup I have done on it, and 31 because the whole
- * thing locks up if you try to access that slot (which doesn't exist of course anyway
- */
-
-#define EXCLUDED_DEV(dev) ((dev->bus->number==0) && ((PCI_SLOT(dev->devfn)==0) || (PCI_SLOT(dev->devfn) == 31)))
-
-static int galileo_read_config_byte(struct pci_dev *dev, int where,
- u8 * val)
-{
-
-
- /* I suspect this doesn't work because this drives a special cycle ? */
- if (EXCLUDED_DEV(dev)) {
- *val = 0xff;
- return PCIBIOS_SUCCESSFUL;
- }
- /* Start the config cycle */
- GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
- /* Read back the result */
- *val = GT_READ_BYTE(PCI_CFG_DATA + (where & 3));
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int galileo_read_config_word(struct pci_dev *dev, int where,
- u16 * val)
-{
-
- if (EXCLUDED_DEV(dev)) {
- *val = 0xffff;
- return PCIBIOS_SUCCESSFUL;
- }
-
- GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
- *val = GT_READ_SHORT(PCI_CFG_DATA + (where & 2));
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int galileo_read_config_dword(struct pci_dev *dev, int where,
- u32 * val)
-{
- if (EXCLUDED_DEV(dev)) {
- *val = 0xffffffff;
- return PCIBIOS_SUCCESSFUL;
- }
-
- GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
- *val = GT_READ(PCI_CFG_DATA);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int galileo_write_config_byte(struct pci_dev *dev, int where,
- u8 val)
-{
- GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-
- GT_WRITE_BYTE(PCI_CFG_DATA + (where & 3), val);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int galileo_write_config_word(struct pci_dev *dev, int where,
- u16 val)
-{
- GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-
- GT_WRITE_SHORT(PCI_CFG_DATA + (where & 2), val);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int galileo_write_config_dword(struct pci_dev *dev, int where,
- u32 val)
-{
- GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where));
-
- GT_WRITE(PCI_CFG_DATA, val);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_config_ops = {
- galileo_read_config_byte,
- galileo_read_config_word,
- galileo_read_config_dword,
- galileo_write_config_byte,
- galileo_write_config_word,
- galileo_write_config_dword
-};
-
-
-/* Everything hangs off this */
-static struct pci_bus *pci_root_bus;
-
-
-static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
-{
- return PCI_SLOT(dev->devfn);
-}
-
-static int __init map_od_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- /* Slot 1: Galileo
- * Slot 2: PCI Slot 1
- * Slot 3: PCI Slot 2
- * Slot 4: ESS
- */
- switch (slot) {
- case 2:
- return OVERDRIVE_PCI_IRQ1;
- case 3:
- /* Note this assumes you have a hacked card in slot 2 */
- return OVERDRIVE_PCI_IRQ2;
- case 4:
- return OVERDRIVE_ESS_IRQ;
- default:
- /* printk("PCI: Unexpected IRQ mapping request for slot %d\n", slot); */
- return -1;
- }
-}
-
-
-
-void __init
-pcibios_fixup_pbus_ranges(struct pci_bus *bus, struct pbus_set_ranges_data *ranges)
-{
- ranges->io_start -= bus->resource[0]->start;
- ranges->io_end -= bus->resource[0]->start;
- ranges->mem_start -= bus->resource[1]->start;
- ranges->mem_end -= bus->resource[1]->start;
-}
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- printk("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-void __init pcibios_init(void)
-{
- static struct resource galio,galmem;
-
- /* Allocate the registers used by the Galileo */
- galio.flags = IORESOURCE_IO;
- galio.name = "Galileo GT64011";
- galmem.flags = IORESOURCE_MEM|IORESOURCE_PREFETCH;
- galmem.name = "Galileo GT64011 DRAM";
-
- allocate_resource(&ioport_resource, &galio, 256,
- GT64111_IO_BASE_ADDRESS,GT64111_IO_BASE_ADDRESS+256, 256, NULL, NULL);
- allocate_resource(&iomem_resource, &galmem,PCI_DRAM_SIZE,
- PHYSADDR(PCI_DRAM_BASE), PHYSADDR(PCI_DRAM_BASE)+PCI_DRAM_SIZE,
- PCI_DRAM_SIZE, NULL, NULL);
-
- /* ok, do the scan man */
- pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
-
- pci_assign_unassigned_resources();
- pci_fixup_irqs(no_swizzle, map_od_irq);
-
-#ifdef TEST_DRAM
- printk("Testing PCI DRAM - ");
- if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) {
- printk("Passed\n");
- }else {
- printk("FAILED\n");
- }
-#endif
-
-}
-
-char * __init pcibios_setup(char *str)
-{
- return str;
-}
-
-
-
-int pcibios_enable_device(struct pci_dev *dev)
-{
-
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for (idx = 0; idx < 6; idx++) {
- r = dev->resource + idx;
- if (!r->start && r->end) {
- printk(KERN_ERR
- "PCI: Device %s not available because"
- " of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (cmd != old_cmd) {
- printk("PCI: enabling device %s (%04x -> %04x)\n",
- pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-
-}
-
-/* We should do some optimisation work here I think. Ok for now though */
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-
-}
-
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size)
-{
-}
-
-void __init pcibios_update_resource(struct pci_dev *dev, struct resource *root,
- struct resource *res, int resource)
-{
-
- unsigned long where, size;
- u32 reg;
-
-
- printk("PCI: Assigning %3s %08lx to %s\n",
- res->flags & IORESOURCE_IO ? "IO" : "MEM",
- res->start, dev->name);
-
- where = PCI_BASE_ADDRESS_0 + resource * 4;
- size = res->end - res->start;
-
- pci_read_config_dword(dev, where, ®);
- reg = (reg & size) | (((u32) (res->start - root->start)) & ~size);
- pci_write_config_dword(dev, where, reg);
-}
-
-
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
-{
- printk("PCI: Assigning IRQ %02d to %s\n", irq, dev->name);
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as certain crappy BIOSes forget to set it properly.
- */
-unsigned int pcibios_max_latency = 255;
-
-void pcibios_set_master(struct pci_dev *dev)
-{
- u8 lat;
- pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
- if (lat < 16)
- lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
- else if (lat > pcibios_max_latency)
- lat = pcibios_max_latency;
- else
- return;
- printk("PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
diff --git a/arch/sh/boards/overdrive/io.c b/arch/sh/boards/overdrive/io.c
deleted file mode 100644
index 4671b6b..0000000
--- a/arch/sh/boards/overdrive/io.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains the I/O routines for use on the overdrive board
- *
- */
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/addrspace.h>
-
-#include <asm/overdrive/overdrive.h>
-
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the SuperH architecture, we just read/write the
- * memory location directly.
- */
-
-#define dprintk(x...)
-
-/* Translates an IO address to where it is mapped in memory */
-
-#define io_addr(x) (((unsigned)(x))|PCI_GTIO_BASE)
-
-unsigned char od_inb(unsigned long port)
-{
-dprintk("od_inb(%x)\n", port);
- return readb(io_addr(port)) & 0xff;
-}
-
-
-unsigned short od_inw(unsigned long port)
-{
-dprintk("od_inw(%x)\n", port);
- return readw(io_addr(port)) & 0xffff;
-}
-
-unsigned int od_inl(unsigned long port)
-{
-dprintk("od_inl(%x)\n", port);
- return readl(io_addr(port));
-}
-
-void od_outb(unsigned char value, unsigned long port)
-{
-dprintk("od_outb(%x, %x)\n", value, port);
- writeb(value, io_addr(port));
-}
-
-void od_outw(unsigned short value, unsigned long port)
-{
-dprintk("od_outw(%x, %x)\n", value, port);
- writew(value, io_addr(port));
-}
-
-void od_outl(unsigned int value, unsigned long port)
-{
-dprintk("od_outl(%x, %x)\n", value, port);
- writel(value, io_addr(port));
-}
-
-/* This is horrible at the moment - needs more work to do something sensible */
-#define IO_DELAY() udelay(10)
-
-#define OUT_DELAY(x,type) \
-void od_out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();}
-
-#define IN_DELAY(x,type) \
-unsigned type od_in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;}
-
-
-OUT_DELAY(b,char)
-OUT_DELAY(w,short)
-OUT_DELAY(l,int)
-
-IN_DELAY(b,char)
-IN_DELAY(w,short)
-IN_DELAY(l,int)
-
-
-/* Now for the string version of these functions */
-void od_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- int i;
- unsigned char *p = (unsigned char *) addr;
-
- for (i = 0; i < count; i++, p++) {
- outb(*p, port);
- }
-}
-
-
-void od_insb(unsigned long port, void *addr, unsigned long count)
-{
- int i;
- unsigned char *p = (unsigned char *) addr;
-
- for (i = 0; i < count; i++, p++) {
- *p = inb(port);
- }
-}
-
-/* For the 16 and 32 bit string functions, we have to worry about alignment.
- * The SH does not do unaligned accesses, so we have to read as bytes and
- * then write as a word or dword.
- * This can be optimised a lot more, especially in the case where the data
- * is aligned
- */
-
-void od_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- int i;
- unsigned short tmp;
- unsigned char *p = (unsigned char *) addr;
-
- for (i = 0; i < count; i++, p += 2) {
- tmp = (*p) | ((*(p + 1)) << 8);
- outw(tmp, port);
- }
-}
-
-
-void od_insw(unsigned long port, void *addr, unsigned long count)
-{
- int i;
- unsigned short tmp;
- unsigned char *p = (unsigned char *) addr;
-
- for (i = 0; i < count; i++, p += 2) {
- tmp = inw(port);
- p[0] = tmp & 0xff;
- p[1] = (tmp >> 8) & 0xff;
- }
-}
-
-
-void od_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- int i;
- unsigned tmp;
- unsigned char *p = (unsigned char *) addr;
-
- for (i = 0; i < count; i++, p += 4) {
- tmp = (*p) | ((*(p + 1)) << 8) | ((*(p + 2)) << 16) |
- ((*(p + 3)) << 24);
- outl(tmp, port);
- }
-}
-
-
-void od_insl(unsigned long port, void *addr, unsigned long count)
-{
- int i;
- unsigned tmp;
- unsigned char *p = (unsigned char *) addr;
-
- for (i = 0; i < count; i++, p += 4) {
- tmp = inl(port);
- p[0] = tmp & 0xff;
- p[1] = (tmp >> 8) & 0xff;
- p[2] = (tmp >> 16) & 0xff;
- p[3] = (tmp >> 24) & 0xff;
-
- }
-}
diff --git a/arch/sh/boards/overdrive/irq.c b/arch/sh/boards/overdrive/irq.c
deleted file mode 100644
index 5d730c7..0000000
--- a/arch/sh/boards/overdrive/irq.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Looks after interrupts on the overdrive board.
- *
- * Bases on the IPR irq system
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <asm/overdrive/overdrive.h>
-
-struct od_data {
- int overdrive_irq;
- int irq_mask;
-};
-
-#define NUM_EXTERNAL_IRQS 16
-#define EXTERNAL_IRQ_NOT_IN_USE (-1)
-#define EXTERNAL_IRQ_NOT_ASSIGNED (-1)
-
-/*
- * This table is used to determine what to program into the FPGA's CT register
- * for the specified Linux IRQ.
- *
- * The irq_mask gives the interrupt number from the PCI board (PCI_Int(6:0))
- * but is one greater than that because the because the FPGA treats 0
- * as disabled, a value of 1 asserts PCI_Int0, and so on.
- *
- * The overdrive_irq specifies which of the eight interrupt sources generates
- * that interrupt, and but is multiplied by four to give the bit offset into
- * the CT register.
- *
- * The seven interrupts levels (SH4 IRL's) we have available here is hardwired
- * by the EPLD. The assignments here of which PCI interrupt generates each
- * level is arbitary.
- */
-static struct od_data od_data_table[NUM_EXTERNAL_IRQS] = {
- /* overdrive_irq , irq_mask */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 0 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, 7}, /* 1 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, 6}, /* 2 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 3 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, 5}, /* 4 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 5 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 6 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, 4}, /* 7 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 8 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 9 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, 3}, /* 10 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, 2}, /* 11 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 12 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, 1}, /* 13 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE}, /* 14 */
- {EXTERNAL_IRQ_NOT_ASSIGNED, EXTERNAL_IRQ_NOT_IN_USE} /* 15 */
-};
-
-static void set_od_data(int overdrive_irq, int irq)
-{
- if (irq >= NUM_EXTERNAL_IRQS || irq < 0)
- return;
- od_data_table[irq].overdrive_irq = overdrive_irq << 2;
-}
-
-static void enable_od_irq(unsigned int irq);
-void disable_od_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_od_irq disable_od_irq
-
-static void mask_and_ack_od(unsigned int);
-static void end_od_irq(unsigned int irq);
-
-static unsigned int startup_od_irq(unsigned int irq)
-{
- enable_od_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type od_irq_type = {
- .typename = "Overdrive-IRQ",
- .startup = startup_od_irq,
- .shutdown = shutdown_od_irq,
- .enable = enable_od_irq,
- .disable = disable_od_irq,
- .ack = mask_and_ack_od,
- .end = end_od_irq
-};
-
-static void disable_od_irq(unsigned int irq)
-{
- unsigned val, flags;
- int overdrive_irq;
- unsigned mask;
-
- /* Not a valid interrupt */
- if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
- return;
-
- /* Is is necessary to use a cli here? Would a spinlock not be
- * mroe efficient?
- */
- local_irq_save(flags);
- overdrive_irq = od_data_table[irq].overdrive_irq;
- if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) {
- mask = ~(0x7 << overdrive_irq);
- val = ctrl_inl(OVERDRIVE_INT_CT);
- val &= mask;
- ctrl_outl(val, OVERDRIVE_INT_CT);
- }
- local_irq_restore(flags);
-}
-
-static void enable_od_irq(unsigned int irq)
-{
- unsigned val, flags;
- int overdrive_irq;
- unsigned mask;
-
- /* Not a valid interrupt */
- if (irq < 0 || irq >= NUM_EXTERNAL_IRQS)
- return;
-
- /* Set priority in OD back to original value */
- local_irq_save(flags);
- /* This one is not in use currently */
- overdrive_irq = od_data_table[irq].overdrive_irq;
- if (overdrive_irq != EXTERNAL_IRQ_NOT_ASSIGNED) {
- val = ctrl_inl(OVERDRIVE_INT_CT);
- mask = ~(0x7 << overdrive_irq);
- val &= mask;
- mask = od_data_table[irq].irq_mask << overdrive_irq;
- val |= mask;
- ctrl_outl(val, OVERDRIVE_INT_CT);
- }
- local_irq_restore(flags);
-}
-
-
-
-/* this functions sets the desired irq handler to be an overdrive type */
-static void __init make_od_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &od_irq_type;
- disable_od_irq(irq);
-}
-
-
-static void mask_and_ack_od(unsigned int irq)
-{
- disable_od_irq(irq);
-}
-
-static void end_od_irq(unsigned int irq)
-{
- enable_od_irq(irq);
-}
-
-void __init init_overdrive_irq(void)
-{
- int i;
-
- /* Disable all interrupts */
- ctrl_outl(0, OVERDRIVE_INT_CT);
-
- /* Update interrupt pin mode to use encoded interrupts */
- i = ctrl_inw(INTC_ICR);
- i &= ~INTC_ICR_IRLM;
- ctrl_outw(i, INTC_ICR);
-
- for (i = 0; i < NUM_EXTERNAL_IRQS; i++) {
- if (od_data_table[i].irq_mask != EXTERNAL_IRQ_NOT_IN_USE) {
- make_od_irq(i);
- } else if (i != 15) { // Cannot use imask on level 15
- make_imask_irq(i);
- }
- }
-
- /* Set up the interrupts */
- set_od_data(OVERDRIVE_PCI_INTA, OVERDRIVE_PCI_IRQ1);
- set_od_data(OVERDRIVE_PCI_INTB, OVERDRIVE_PCI_IRQ2);
- set_od_data(OVERDRIVE_AUDIO_INT, OVERDRIVE_ESS_IRQ);
-}
diff --git a/arch/sh/boards/overdrive/led.c b/arch/sh/boards/overdrive/led.c
deleted file mode 100644
index 860d7f2..0000000
--- a/arch/sh/boards/overdrive/led.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * linux/arch/sh/overdrive/led.c
- *
- * Copyright (C) 1999 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains an Overdrive specific LED feature.
- */
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/overdrive/overdrive.h>
-
-static void mach_led(int position, int value)
-{
- unsigned long flags;
- unsigned long reg;
-
- local_irq_save(flags);
-
- reg = readl(OVERDRIVE_CTRL);
- if (value) {
- reg |= (1<<3);
- } else {
- reg &= ~(1<<3);
- }
- writel(reg, OVERDRIVE_CTRL);
-
- local_irq_restore(flags);
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void heartbeat_od(void)
-{
- static unsigned cnt = 0, period = 0, dist = 0;
-
- if (cnt == 0 || cnt == dist)
- mach_led( -1, 1);
- else if (cnt == 7 || cnt == dist+7)
- mach_led( -1, 0);
-
- if (++cnt > period) {
- cnt = 0;
- /* The hyperbolic function below modifies the heartbeat period
- * length in dependency of the current (5min) load. It goes
- * through the points f(0)=126, f(1)=86, f(5)=51,
- * f(inf)->30. */
- period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
- dist = period / 4;
- }
-}
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/overdrive/mach.c b/arch/sh/boards/overdrive/mach.c
deleted file mode 100644
index 2834a03..0000000
--- a/arch/sh/boards/overdrive/mach.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/sh/overdrive/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the STMicroelectronics Overdrive
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io_unknown.h>
-#include <asm/io_generic.h>
-#include <asm/overdrive/io.h>
-
-void heartbeat_od(void);
-void init_overdrive_irq(void);
-void galileo_pcibios_init(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_od __initmv = {
- .mv_nr_irqs = 48,
-
- .mv_inb = od_inb,
- .mv_inw = od_inw,
- .mv_inl = od_inl,
- .mv_outb = od_outb,
- .mv_outw = od_outw,
- .mv_outl = od_outl,
-
- .mv_inb_p = od_inb_p,
- .mv_inw_p = od_inw_p,
- .mv_inl_p = od_inl_p,
- .mv_outb_p = od_outb_p,
- .mv_outw_p = od_outw_p,
- .mv_outl_p = od_outl_p,
-
- .mv_insb = od_insb,
- .mv_insw = od_insw,
- .mv_insl = od_insl,
- .mv_outsb = od_outsb,
- .mv_outsw = od_outsw,
- .mv_outsl = od_outsl,
-
-#ifdef CONFIG_PCI
- .mv_init_irq = init_overdrive_irq,
-#endif
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_od,
-#endif
-};
-
-ALIAS_MV(od)
diff --git a/arch/sh/boards/overdrive/pcidma.c b/arch/sh/boards/overdrive/pcidma.c
deleted file mode 100644
index 1c9bfed..0000000
--- a/arch/sh/boards/overdrive/pcidma.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Dynamic DMA mapping support.
- *
- * On the overdrive, we can only DMA from memory behind the PCI bus!
- * this means that all DMA'able memory must come from there.
- * this restriction will not apply to later boards.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-
-void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t * dma_handle)
-{
- void *ret;
- int gfp = GFP_ATOMIC;
-
- printk("BUG: pci_alloc_consistent() called - not yet supported\n");
- /* We ALWAYS need DMA memory on the overdrive hardware,
- * due to it's extreme weirdness
- * Need to flush the cache here as well, since the memory
- * can still be seen through the cache!
- */
- gfp |= GFP_DMA;
- ret = (void *) __get_free_pages(gfp, get_order(size));
-
- if (ret != NULL) {
- memset(ret, 0, size);
- *dma_handle = virt_to_bus(ret);
- }
- return ret;
-}
-
-void pci_free_consistent(struct pci_dev *hwdev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- free_pages((unsigned long) vaddr, get_order(size));
-}
diff --git a/arch/sh/boards/overdrive/setup.c b/arch/sh/boards/overdrive/setup.c
deleted file mode 100644
index a3a7744..0000000
--- a/arch/sh/boards/overdrive/setup.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/sh/overdrive/setup.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * STMicroelectronics Overdrive Support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#include <asm/overdrive/overdrive.h>
-#include <asm/overdrive/fpga.h>
-
-const char *get_system_type(void)
-{
- return "SH7750 Overdrive";
-}
-
-/*
- * Initialize the board
- */
-int __init platform_setup(void)
-{
-#ifdef CONFIG_PCI
- init_overdrive_fpga();
- galileo_init();
-#endif
-
- /* Enable RS232 receive buffers */
- writel(0x1e, OVERDRIVE_CTRL);
-}
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/renesas/edosk7705/Makefile
index 7fccbf2..14bdd53 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/renesas/edosk7705/Makefile
@@ -1,10 +1,6 @@
#
# Makefile for the EDOSK7705 specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
obj-y := setup.o io.o
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/renesas/edosk7705/setup.c
index ba143fa..ec5be01 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/renesas/edosk7705/setup.c
@@ -8,19 +8,21 @@
* Modified for edosk7705 development
* board by S. Dunn, 2003.
*/
-
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/machvec_init.h>
#include <asm/edosk7705/io.h>
-static void init_edosk7705(void);
+static void __init sh_edosk7705_init_irq(void)
+{
+ /* This is the Ethernet interrupt */
+ make_imask_irq(0x09);
+}
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_edosk7705 __initmv = {
+ .mv_name = "EDOSK7705",
.mv_nr_irqs = 80,
.mv_inb = sh_edosk7705_inb,
@@ -37,23 +39,6 @@
.mv_outsl = sh_edosk7705_outsl,
.mv_isa_port2addr = sh_edosk7705_isa_port2addr,
- .mv_init_irq = init_edosk7705,
+ .mv_init_irq = sh_edosk7705_init_irq,
};
ALIAS_MV(edosk7705)
-
-static void __init init_edosk7705(void)
-{
- /* This is the Ethernet interrupt */
- make_imask_irq(0x09);
-}
-
-const char *get_system_type(void)
-{
- return "EDOSK7705";
-}
-
-void __init platform_setup(void)
-{
- /* Nothing .. */
-}
-
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Kconfig b/arch/sh/boards/renesas/hs7751rvoip/Kconfig
new file mode 100644
index 0000000..1743be4
--- /dev/null
+++ b/arch/sh/boards/renesas/hs7751rvoip/Kconfig
@@ -0,0 +1,12 @@
+if SH_HS7751RVOIP
+
+menu "HS7751RVoIP options"
+
+config HS7751RVOIP_CODEC
+ bool "Support VoIP Codec section"
+ help
+ Selecting this option will support CODEC section.
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile
index e8b4109..e626377 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/Makefile
+++ b/arch/sh/boards/renesas/hs7751rvoip/Makefile
@@ -1,12 +1,8 @@
#
# Makefile for the HS7751RVoIP specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-obj-y := mach.o setup.o io.o irq.o led.o
+obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c
index 3a1abfa..9ea1136 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/io.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/io.c
@@ -10,21 +10,16 @@
* placeholder code from io_hs7751rvoip.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/hs7751rvoip/hs7751rvoip.h>
#include <asm/addrspace.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-extern void *area5_io8_base; /* Area 5 8bit I/O Base address */
extern void *area6_io8_base; /* Area 6 8bit I/O Base address */
extern void *area5_io16_base; /* Area 5 16bit I/O Base address */
-extern void *area6_io16_base; /* Area 6 16bit I/O Base address */
/*
* The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC)
@@ -33,25 +28,8 @@
* like the other Solution Engine boards.
*/
-#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-#if defined(CONFIG_HS7751RVOIP_CODEC)
#define CODEC_IO_BASE 0x1000
-#endif
-
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
+#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE))
static inline unsigned long port2adr(unsigned int port)
{
@@ -59,9 +37,10 @@
if (port == 0x3f6)
return ((unsigned long)area5_io16_base + 0x0c);
else
- return ((unsigned long)area5_io16_base + 0x800 + ((port-0x1f0) << 1));
+ return ((unsigned long)area5_io16_base + 0x800 +
+ ((port-0x1f0) << 1));
else
- maybebadio(port2adr, (unsigned long)port);
+ maybebadio((unsigned long)port);
return port;
}
@@ -78,25 +57,10 @@
}
#if defined(CONFIG_HS7751RVOIP_CODEC)
-static inline int
-codec_port(unsigned long port)
-{
- if (CODEC_IO_BASE <= port && port < (CODEC_IO_BASE+0x20))
- return 1;
- else
- return 0;
-}
-#endif
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
- ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
+#define codec_port(port) \
+ ((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20)))
#else
-#define CHECK_SH7751_PCIIO(port) (0)
+#define codec_port(port) (0)
#endif
/*
@@ -109,15 +73,13 @@
unsigned char hs7751rvoip_inb(unsigned long port)
{
if (PXSEG(port))
- return *(volatile unsigned char *)port;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+ return ctrl_inb(port);
else if (codec_port(port))
- return *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE));
-#endif
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- return *(volatile unsigned char *)PCI_IOMAP(port);
+ return ctrl_inb(CODEC_IOMAP(port));
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return ctrl_inb(pci_ioaddr(port));
else
- return (*(volatile unsigned short *)port2adr(port) & 0xff);
+ return ctrl_inw(port2adr(port)) & 0xff;
}
unsigned char hs7751rvoip_inb_p(unsigned long port)
@@ -125,38 +87,36 @@
unsigned char v;
if (PXSEG(port))
- v = *(volatile unsigned char *)port;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+ v = ctrl_inb(port);
else if (codec_port(port))
- v = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE));
-#endif
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- v = *(volatile unsigned char *)PCI_IOMAP(port);
+ v = ctrl_inb(CODEC_IOMAP(port));
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ v = ctrl_inb(pci_ioaddr(port));
else
- v = (*(volatile unsigned short *)port2adr(port) & 0xff);
- delay();
+ v = ctrl_inw(port2adr(port)) & 0xff;
+ ctrl_delay();
return v;
}
unsigned short hs7751rvoip_inw(unsigned long port)
{
if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- return *(volatile unsigned short *)PCI_IOMAP(port);
+ return ctrl_inw(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return ctrl_inw(pci_ioaddr(port));
else
- maybebadio(inw, port);
+ maybebadio(port);
return 0;
}
unsigned int hs7751rvoip_inl(unsigned long port)
{
if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- return *(volatile unsigned long *)PCI_IOMAP(port);
+ return ctrl_inl(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return ctrl_inl(pci_ioaddr(port));
else
- maybebadio(inl, port);
+ maybebadio(port);
return 0;
}
@@ -164,146 +124,160 @@
{
if (PXSEG(port))
- *(volatile unsigned char *)port = value;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+ ctrl_outb(value, port);
else if (codec_port(port))
- *(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value;
-#endif
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *(unsigned char *)PCI_IOMAP(port) = value;
+ ctrl_outb(value, CODEC_IOMAP(port));
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outb(value, pci_ioaddr(port));
else
- *(volatile unsigned short *)port2adr(port) = value;
+ ctrl_outb(value, port2adr(port));
}
void hs7751rvoip_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
- *(volatile unsigned char *)port = value;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+ ctrl_outb(value, port);
else if (codec_port(port))
- *(volatile unsigned cjar *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = value;
-#endif
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *(unsigned char *)PCI_IOMAP(port) = value;
+ ctrl_outb(value, CODEC_IOMAP(port));
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outb(value, pci_ioaddr(port));
else
- *(volatile unsigned short *)port2adr(port) = value;
- delay();
+ ctrl_outw(value, port2adr(port));
+
+ ctrl_delay();
}
void hs7751rvoip_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *(unsigned short *)PCI_IOMAP(port) = value;
+ ctrl_outw(value, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outw(value, pci_ioaddr(port));
else
- maybebadio(outw, port);
+ maybebadio(port);
}
void hs7751rvoip_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *((unsigned long *)PCI_IOMAP(port)) = value;
+ ctrl_outl(value, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outl(value, pci_ioaddr(port));
else
- maybebadio(outl, port);
+ maybebadio(port);
}
void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count)
{
+ u8 *buf = addr;
+
if (PXSEG(port))
- while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)port;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+ while (count--)
+ *buf++ = ctrl_inb(port);
else if (codec_port(port))
- while (count--) *((unsigned char *) addr)++ = *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE));
-#endif
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- volatile __u8 *bp = (__u8 *)PCI_IOMAP(port);
+ while (count--)
+ *buf++ = ctrl_inb(CODEC_IOMAP(port));
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
- while (count--) *((volatile unsigned char *) addr)++ = *bp;
+ while (count--)
+ *buf++ = *bp;
} else {
- volatile __u16 *p = (volatile unsigned short *)port2adr(port);
+ volatile u16 *p = (volatile u16 *)port2adr(port);
- while (count--) *((unsigned char *) addr)++ = *p & 0xff;
+ while (count--)
+ *buf++ = *p & 0xff;
}
}
void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count)
{
- volatile __u16 *p;
+ volatile u16 *p;
+ u16 *buf = addr;
if (PXSEG(port))
- p = (volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- p = (volatile unsigned short *)PCI_IOMAP(port);
+ p = (volatile u16 *)port;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ p = (volatile u16 *)pci_ioaddr(port);
else
- p = (volatile unsigned short *)port2adr(port);
- while (count--) *((__u16 *) addr)++ = *p;
+ p = (volatile u16 *)port2adr(port);
+ while (count--)
+ *buf++ = *p;
}
void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count)
{
- if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
- while (count--) *((__u32 *) addr)++ = *p;
+ if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+ u32 *buf = addr;
+
+ while (count--)
+ *buf++ = *p;
} else
- maybebadio(insl, port);
+ maybebadio(port);
}
void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count)
{
+ const u8 *buf = addr;
+
if (PXSEG(port))
- while (count--) *(volatile unsigned char *)port = *((unsigned char *) addr)++;
-#if defined(CONFIG_HS7751RVOIP_CODEC)
+ while (count--)
+ ctrl_outb(*buf++, port);
else if (codec_port(port))
- while (count--) *(volatile unsigned char *)((unsigned long)area6_io8_base+(port-CODEC_IO_BASE)) = *((unsigned char *) addr)++;
-#endif
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- volatile __u8 *bp = (__u8 *)PCI_IOMAP(port);
+ while (count--)
+ ctrl_outb(*buf++, CODEC_IOMAP(port));
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
- while (count--) *bp = *((volatile unsigned char *) addr)++;
+ while (count--)
+ *bp = *buf++;
} else {
- volatile __u16 *p = (volatile unsigned short *)port2adr(port);
+ volatile u16 *p = (volatile u16 *)port2adr(port);
- while (count--) *p = *((unsigned char *) addr)++;
+ while (count--)
+ *p = *buf++;
}
}
void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count)
{
- volatile __u16 *p;
+ volatile u16 *p;
+ const u16 *buf = addr;
if (PXSEG(port))
- p = (volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- p = (volatile unsigned short *)PCI_IOMAP(port);
+ p = (volatile u16 *)port;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ p = (volatile u16 *)pci_ioaddr(port);
else
- p = (volatile unsigned short *)port2adr(port);
- while (count--) *p = *((__u16 *) addr)++;
+ p = (volatile u16 *)port2adr(port);
+
+ while (count--)
+ *p = *buf++;
}
void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count)
{
- if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
+ const u32 *buf = addr;
- while (count--) *p = *((__u32 *) addr)++;
+ if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+ while (count--)
+ *p = *buf++;
} else
- maybebadio(outsl, port);
+ maybebadio(port);
}
-void *hs7751rvoip_ioremap(unsigned long offset, unsigned long size)
+void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size)
{
- if (offset >= 0xfd000000)
- return (void *)offset;
- else
- return (void *)P2SEGADDR(offset);
-}
-EXPORT_SYMBOL(hs7751rvoip_ioremap);
+ if (PXSEG(port))
+ return (void __iomem *)port;
+ else if (unlikely(codec_port(port) && (size == 1)))
+ return (void __iomem *)CODEC_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return (void __iomem *)pci_ioaddr(port);
-unsigned long hs7751rvoip_isa_port2addr(unsigned long offset)
-{
- return port2adr(offset);
+ return (void __iomem *)port2adr(port);
}
diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c
index 705b7dd..c617b18 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/irq.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c
@@ -35,30 +35,24 @@
static void disable_hs7751rvoip_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short val;
unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
/* Set the priority in IPR to 0 */
- local_irq_save(flags);
val = ctrl_inw(IRLCNTR3);
val &= mask;
ctrl_outw(val, IRLCNTR3);
- local_irq_restore(flags);
}
static void enable_hs7751rvoip_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short val;
unsigned short value = (0x0001 << mask_pos[irq]);
/* Set priority in IPR back to original value */
- local_irq_save(flags);
val = ctrl_inw(IRLCNTR3);
val |= value;
ctrl_outw(val, IRLCNTR3);
- local_irq_restore(flags);
}
static void ack_hs7751rvoip_irq(unsigned int irq)
diff --git a/arch/sh/boards/renesas/hs7751rvoip/led.c b/arch/sh/boards/renesas/hs7751rvoip/led.c
deleted file mode 100644
index b6608ff..0000000
--- a/arch/sh/boards/renesas/hs7751rvoip/led.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/arch/sh/kernel/setup_hs7751rvoip.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Renesas Technology Sales HS7751RVoIP Support.
- *
- * Modified for HS7751RVoIP by
- * Atom Create Engineering Co., Ltd. 2002.
- * Lineo uSolutions, Inc. 2003.
- */
-
-#include <asm/io.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-
-extern unsigned int debug_counter;
-
-void debug_led_disp(void)
-{
- unsigned short value;
-
- value = (unsigned char)debug_counter++;
- ctrl_outb((0xf0|value), PA_OUTPORTR);
- if (value == 0x0f)
- debug_counter = 0;
-}
diff --git a/arch/sh/boards/renesas/hs7751rvoip/mach.c b/arch/sh/boards/renesas/hs7751rvoip/mach.c
deleted file mode 100644
index caf967f..0000000
--- a/arch/sh/boards/renesas/hs7751rvoip/mach.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_hs7751rvoip.c
- *
- * Minor tweak of mach_se.c file to reference hs7751rvoip-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Renesas Technology sales HS7751RVoIP
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/irq.h>
-#include <asm/hs7751rvoip/io.h>
-
-extern void init_hs7751rvoip_IRQ(void);
-extern void *hs7751rvoip_ioremap(unsigned long, unsigned long);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_hs7751rvoip __initmv = {
- .mv_nr_irqs = 72,
-
- .mv_inb = hs7751rvoip_inb,
- .mv_inw = hs7751rvoip_inw,
- .mv_inl = hs7751rvoip_inl,
- .mv_outb = hs7751rvoip_outb,
- .mv_outw = hs7751rvoip_outw,
- .mv_outl = hs7751rvoip_outl,
-
- .mv_inb_p = hs7751rvoip_inb_p,
- .mv_inw_p = hs7751rvoip_inw,
- .mv_inl_p = hs7751rvoip_inl,
- .mv_outb_p = hs7751rvoip_outb_p,
- .mv_outw_p = hs7751rvoip_outw,
- .mv_outl_p = hs7751rvoip_outl,
-
- .mv_insb = hs7751rvoip_insb,
- .mv_insw = hs7751rvoip_insw,
- .mv_insl = hs7751rvoip_insl,
- .mv_outsb = hs7751rvoip_outsb,
- .mv_outsw = hs7751rvoip_outsw,
- .mv_outsl = hs7751rvoip_outsl,
-
- .mv_ioremap = hs7751rvoip_ioremap,
- .mv_isa_port2addr = hs7751rvoip_isa_port2addr,
- .mv_init_irq = init_hs7751rvoip_IRQ,
-};
-ALIAS_MV(hs7751rvoip)
diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c
index 29fb5ff..0414c15 100644
--- a/arch/sh/boards/renesas/hs7751rvoip/setup.c
+++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c
@@ -1,44 +1,38 @@
/*
- * linux/arch/sh/kernel/setup_hs7751rvoip.c
+ * Renesas Technology Sales HS7751RVoIP Support.
*
* Copyright (C) 2000 Kazumoto Kojima
*
- * Renesas Technology Sales HS7751RVoIP Support.
- *
* Modified for HS7751RVoIP by
* Atom Create Engineering Co., Ltd. 2002.
* Lineo uSolutions, Inc. 2003.
*/
-
#include <linux/init.h>
#include <linux/irq.h>
-
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
-
#include <linux/mm.h>
#include <linux/vmalloc.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+#include <asm/hs7751rvoip/hs7751rvoip.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+#include <asm/irq.h>
-/* defined in mm/ioremap.c */
-extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
-
-unsigned int debug_counter;
-
-const char *get_system_type(void)
+static void __init hs7751rvoip_init_irq(void)
{
- return "HS7751RVoIP";
+#if defined(CONFIG_HS7751RVOIP_CODEC)
+ make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+ make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+#endif
+
+ init_hs7751rvoip_IRQ();
}
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
+static void hs7751rvoip_power_off(void)
{
- printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
- ctrl_outb(0xf0, PA_OUTPORTR);
- debug_counter = 0;
+ ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR);
}
void *area5_io8_base;
@@ -46,16 +40,15 @@
void *area5_io16_base;
void *area6_io16_base;
-int __init cf_init(void)
+static int __init hs7751rvoip_cf_init(void)
{
pgprot_t prot;
- unsigned long paddrbase, psize;
+ unsigned long paddrbase;
/* open I/O area window */
paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800));
- psize = PAGE_SIZE;
prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16);
- area5_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area5_io16_base) {
printk("allocate_cf_area : can't open CF I/O window!\n");
return -ENOMEM;
@@ -64,19 +57,18 @@
/* XXX : do we need attribute and common-memory area also? */
paddrbase = virt_to_phys((void *)PA_AREA6_IO);
- psize = PAGE_SIZE;
#if defined(CONFIG_HS7751RVOIP_CODEC)
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8);
#else
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8);
#endif
- area6_io8_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area6_io8_base) {
printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n");
return -ENOMEM;
}
prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
- area6_io16_base = p3_ioremap(paddrbase, psize, prot.pgprot);
+ area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
if (!area6_io16_base) {
printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n");
return -ENOMEM;
@@ -85,4 +77,46 @@
return 0;
}
-__initcall (cf_init);
+/*
+ * Initialize the board
+ */
+static void __init hs7751rvoip_setup(char **cmdline_p)
+{
+ device_initcall(hs7751rvoip_cf_init);
+
+ ctrl_outb(0xf0, PA_OUTPORTR);
+ pm_power_off = hs7751rvoip_power_off;
+
+ printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n");
+}
+
+struct sh_machine_vector mv_hs7751rvoip __initmv = {
+ .mv_name = "HS7751RVoIP",
+ .mv_setup = hs7751rvoip_setup,
+ .mv_nr_irqs = 72,
+
+ .mv_inb = hs7751rvoip_inb,
+ .mv_inw = hs7751rvoip_inw,
+ .mv_inl = hs7751rvoip_inl,
+ .mv_outb = hs7751rvoip_outb,
+ .mv_outw = hs7751rvoip_outw,
+ .mv_outl = hs7751rvoip_outl,
+
+ .mv_inb_p = hs7751rvoip_inb_p,
+ .mv_inw_p = hs7751rvoip_inw,
+ .mv_inl_p = hs7751rvoip_inl,
+ .mv_outb_p = hs7751rvoip_outb_p,
+ .mv_outw_p = hs7751rvoip_outw,
+ .mv_outl_p = hs7751rvoip_outl,
+
+ .mv_insb = hs7751rvoip_insb,
+ .mv_insw = hs7751rvoip_insw,
+ .mv_insl = hs7751rvoip_insl,
+ .mv_outsb = hs7751rvoip_outsb,
+ .mv_outsw = hs7751rvoip_outsw,
+ .mv_outsl = hs7751rvoip_outsl,
+
+ .mv_init_irq = hs7751rvoip_init_irq,
+ .mv_ioport_map = hs7751rvoip_ioport_map,
+};
+ALIAS_MV(hs7751rvoip)
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
new file mode 100644
index 0000000..c26d981
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -0,0 +1,14 @@
+if SH_R7780RP
+
+menu "R7780RP options"
+
+config SH_R7780MP
+ bool "R7780MP board support"
+ default y
+ help
+ Selecting this option will enable support for the mass-production
+ version of the R7780RP. If in doubt, say Y.
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
new file mode 100644
index 0000000..f1776d0
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the R7780RP-1 specific parts of the kernel
+#
+
+obj-y := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c
new file mode 100644
index 0000000..db92d6e
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/io.c
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Renesas Solutions Highlander R7780RP-1
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_r7780rp.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+static inline unsigned long port2adr(unsigned int port)
+{
+ if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+ if (port == 0x3f6)
+ return (PA_AREA5_IO + 0x80c);
+ else
+ return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1));
+ else
+ maybebadio((unsigned long)port);
+
+ return port;
+}
+
+static inline unsigned long port88796l(unsigned int port, int flag)
+{
+ unsigned long addr;
+
+ if (flag)
+ addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1);
+ else
+ addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000;
+
+ return addr;
+}
+
+/* The 7780 R7780RP-1 seems to have everything hooked */
+/* up pretty normally (nothing on high-bytes only...) so this */
+/* shouldn't be needed */
+static inline int shifted_port(unsigned long port)
+{
+ /* For IDE registers, value is not shifted */
+ if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+ return 0;
+ else
+ return 1;
+}
+
+#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
+#define CHECK_AX88796L_PORT(port) \
+ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
+#else
+#define CHECK_AX88796L_PORT(port) (0)
+#endif
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used w/o translation for
+ * compatibility.
+ */
+u8 r7780rp_inb(unsigned long port)
+{
+ if (CHECK_AX88796L_PORT(port))
+ return ctrl_inw(port88796l(port, 0)) & 0xff;
+ else if (PXSEG(port))
+ return ctrl_inb(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return ctrl_inb(pci_ioaddr(port));
+
+ return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 r7780rp_inb_p(unsigned long port)
+{
+ u8 v;
+
+ if (CHECK_AX88796L_PORT(port))
+ v = ctrl_inw(port88796l(port, 0)) & 0xff;
+ else if (PXSEG(port))
+ v = ctrl_inb(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ v = ctrl_inb(pci_ioaddr(port));
+ else
+ v = ctrl_inw(port2adr(port)) & 0xff;
+
+ ctrl_delay();
+
+ return v;
+}
+
+u16 r7780rp_inw(unsigned long port)
+{
+ if (CHECK_AX88796L_PORT(port))
+ maybebadio(port);
+ else if (PXSEG(port))
+ return ctrl_inw(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return ctrl_inw(pci_ioaddr(port));
+ else
+ maybebadio(port);
+
+ return 0;
+}
+
+u32 r7780rp_inl(unsigned long port)
+{
+ if (CHECK_AX88796L_PORT(port))
+ maybebadio(port);
+ else if (PXSEG(port))
+ return ctrl_inl(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return ctrl_inl(pci_ioaddr(port));
+ else
+ maybebadio(port);
+
+ return 0;
+}
+
+void r7780rp_outb(u8 value, unsigned long port)
+{
+ if (CHECK_AX88796L_PORT(port))
+ ctrl_outw(value, port88796l(port, 0));
+ else if (PXSEG(port))
+ ctrl_outb(value, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outb(value, pci_ioaddr(port));
+ else
+ ctrl_outw(value, port2adr(port));
+}
+
+void r7780rp_outb_p(u8 value, unsigned long port)
+{
+ if (CHECK_AX88796L_PORT(port))
+ ctrl_outw(value, port88796l(port, 0));
+ else if (PXSEG(port))
+ ctrl_outb(value, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outb(value, pci_ioaddr(port));
+ else
+ ctrl_outw(value, port2adr(port));
+
+ ctrl_delay();
+}
+
+void r7780rp_outw(u16 value, unsigned long port)
+{
+ if (CHECK_AX88796L_PORT(port))
+ maybebadio(port);
+ else if (PXSEG(port))
+ ctrl_outw(value, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outw(value, pci_ioaddr(port));
+ else
+ maybebadio(port);
+}
+
+void r7780rp_outl(u32 value, unsigned long port)
+{
+ if (CHECK_AX88796L_PORT(port))
+ maybebadio(port);
+ else if (PXSEG(port))
+ ctrl_outl(value, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ ctrl_outl(value, pci_ioaddr(port));
+ else
+ maybebadio(port);
+}
+
+void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
+{
+ volatile u16 *p;
+ u8 *buf = dst;
+
+ if (CHECK_AX88796L_PORT(port)) {
+ p = (volatile u16 *)port88796l(port, 0);
+ while (count--)
+ *buf++ = *p & 0xff;
+ } else if (PXSEG(port)) {
+ while (count--)
+ *buf++ = *(volatile u8 *)port;
+ } else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+ while (count--)
+ *buf++ = *bp;
+ } else {
+ p = (volatile u16 *)port2adr(port);
+ while (count--)
+ *buf++ = *p & 0xff;
+ }
+}
+
+void r7780rp_insw(unsigned long port, void *dst, unsigned long count)
+{
+ volatile u16 *p;
+ u16 *buf = dst;
+
+ if (CHECK_AX88796L_PORT(port))
+ p = (volatile u16 *)port88796l(port, 1);
+ else if (PXSEG(port))
+ p = (volatile u16 *)port;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ p = (volatile u16 *)pci_ioaddr(port);
+ else
+ p = (volatile u16 *)port2adr(port);
+
+ while (count--)
+ *buf++ = *p;
+}
+
+void r7780rp_insl(unsigned long port, void *dst, unsigned long count)
+{
+ u32 *buf = dst;
+
+ if (CHECK_AX88796L_PORT(port))
+ maybebadio(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+ while (count--)
+ *buf++ = *p;
+ } else
+ maybebadio(port);
+}
+
+void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
+{
+ volatile u16 *p;
+ const u8 *buf = src;
+
+ if (CHECK_AX88796L_PORT(port)) {
+ p = (volatile u16 *)port88796l(port, 0);
+ while (count--)
+ *p = *buf++;
+ } else if (PXSEG(port))
+ while (count--)
+ ctrl_outb(*buf++, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
+
+ while (count--)
+ *bp = *buf++;
+ } else {
+ p = (volatile u16 *)port2adr(port);
+ while (count--)
+ *p = *buf++;
+ }
+}
+
+void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
+{
+ volatile u16 *p;
+ const u16 *buf = src;
+
+ if (CHECK_AX88796L_PORT(port))
+ p = (volatile u16 *)port88796l(port, 1);
+ else if (PXSEG(port))
+ p = (volatile u16 *)port;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ p = (volatile u16 *)pci_ioaddr(port);
+ else
+ p = (volatile u16 *)port2adr(port);
+
+ while (count--)
+ *p = *buf++;
+}
+
+void r7780rp_outsl(unsigned long port, const void *src, unsigned long count)
+{
+ const u32 *buf = src;
+
+ if (CHECK_AX88796L_PORT(port))
+ maybebadio(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+
+ while (count--)
+ *p = *buf++;
+ } else
+ maybebadio(port);
+}
+
+void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size)
+{
+ if (CHECK_AX88796L_PORT(port))
+ return (void __iomem *)port88796l(port, size > 1);
+ else if (PXSEG(port))
+ return (void __iomem *)port;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return (void __iomem *)pci_ioaddr(port);
+
+ return (void __iomem *)port2adr(port);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
new file mode 100644
index 0000000..61d5e5d
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq.c
@@ -0,0 +1,117 @@
+/*
+ * linux/arch/sh/boards/renesas/r7780rp/irq.c
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ *
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Modified for R7780RP-1 by
+ * Atom Create Engineering Co., Ltd. 2002.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/r7780rp/r7780rp.h>
+
+#ifdef CONFIG_SH_R7780MP
+static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
+#else
+static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
+#endif
+
+static void enable_r7780rp_irq(unsigned int irq);
+static void disable_r7780rp_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_r7780rp_irq disable_r7780rp_irq
+
+static void ack_r7780rp_irq(unsigned int irq);
+static void end_r7780rp_irq(unsigned int irq);
+
+static unsigned int startup_r7780rp_irq(unsigned int irq)
+{
+ enable_r7780rp_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void disable_r7780rp_irq(unsigned int irq)
+{
+ unsigned short val;
+ unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
+
+ /* Set the priority in IPR to 0 */
+ val = ctrl_inw(IRLCNTR1);
+ val &= mask;
+ ctrl_outw(val, IRLCNTR1);
+}
+
+static void enable_r7780rp_irq(unsigned int irq)
+{
+ unsigned short val;
+ unsigned short value = (0x0001 << mask_pos[irq]);
+
+ /* Set priority in IPR back to original value */
+ val = ctrl_inw(IRLCNTR1);
+ val |= value;
+ ctrl_outw(val, IRLCNTR1);
+}
+
+static void ack_r7780rp_irq(unsigned int irq)
+{
+ disable_r7780rp_irq(irq);
+}
+
+static void end_r7780rp_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_r7780rp_irq(irq);
+}
+
+static struct hw_interrupt_type r7780rp_irq_type = {
+ .typename = "R7780RP-IRQ",
+ .startup = startup_r7780rp_irq,
+ .shutdown = shutdown_r7780rp_irq,
+ .enable = enable_r7780rp_irq,
+ .disable = disable_r7780rp_irq,
+ .ack = ack_r7780rp_irq,
+ .end = end_r7780rp_irq,
+};
+
+static void make_r7780rp_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &r7780rp_irq_type;
+ disable_r7780rp_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_r7780rp_IRQ(void)
+{
+ int i;
+
+ /* IRL0=PCI Slot #A
+ * IRL1=PCI Slot #B
+ * IRL2=PCI Slot #C
+ * IRL3=PCI Slot #D
+ * IRL4=CF Card
+ * IRL5=CF Card Insert
+ * IRL6=M66596
+ * IRL7=SD Card
+ * IRL8=Touch Panel
+ * IRL9=SCI
+ * IRL10=Serial
+ * IRL11=Extention #A
+ * IRL11=Extention #B
+ * IRL12=Debug LAN
+ * IRL13=Push Switch
+ * IRL14=ZiggBee IO
+ */
+
+ for (i=0; i<15; i++)
+ make_r7780rp_irq(i);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c
new file mode 100644
index 0000000..9f02766
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/led.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) Atom Create Engineering Co., Ltd.
+ *
+ * May be copied or modified under the terms of GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+#include <asm/r7780rp/r7780rp.h>
+
+/* Cycle the LED's in the clasic Knightriger/Sun pattern */
+void heartbeat_r7780rp(void)
+{
+ static unsigned int cnt = 0, period = 0;
+ volatile unsigned short *p = (volatile unsigned short *)PA_OBLED;
+ static unsigned bit = 0, up = 1;
+ unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7};
+
+ cnt += 1;
+ if (cnt < period)
+ return;
+
+ cnt = 0;
+
+ /* Go through the points (roughly!):
+ * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
+ */
+ period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
+
+ *p = 1 << bit_pos[bit];
+ if (up)
+ if (bit == 7) {
+ bit--;
+ up = 0;
+ } else
+ bit++;
+ else if (bit == 0)
+ up = 1;
+ else
+ bit--;
+}
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
new file mode 100644
index 0000000..b941aa0
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -0,0 +1,163 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/setup.c
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005, 2006 Paul Mundt
+ *
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+extern void heartbeat_r7780rp(void);
+extern void init_r7780rp_IRQ(void);
+
+static struct resource m66596_usb_host_resources[] = {
+ [0] = {
+ .start = 0xa4800000,
+ .end = 0xa4ffffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 6, /* irq number */
+ .end = 6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m66596_usb_host_device = {
+ .name = "m66596-hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* don't use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(m66596_usb_host_resources),
+ .resource = m66596_usb_host_resources,
+};
+
+static struct platform_device *r7780rp_devices[] __initdata = {
+ &m66596_usb_host_device,
+};
+
+static int __init r7780rp_devices_setup(void)
+{
+ return platform_add_devices(r7780rp_devices,
+ ARRAY_SIZE(r7780rp_devices));
+}
+
+/*
+ * Platform specific clocks
+ */
+static void ivdr_clk_enable(struct clk *clk)
+{
+ ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << 8), PA_IVDRCTL);
+}
+
+static void ivdr_clk_disable(struct clk *clk)
+{
+ ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << 8), PA_IVDRCTL);
+}
+
+static struct clk_ops ivdr_clk_ops = {
+ .enable = ivdr_clk_enable,
+ .disable = ivdr_clk_disable,
+};
+
+static struct clk ivdr_clk = {
+ .name = "ivdr_clk",
+ .ops = &ivdr_clk_ops,
+};
+
+static struct clk *r7780rp_clocks[] = {
+ &ivdr_clk,
+};
+
+static void r7780rp_power_off(void)
+{
+#ifdef CONFIG_SH_R7780MP
+ ctrl_outw(0x0001, PA_POFF);
+#endif
+}
+
+/*
+ * Initialize the board
+ */
+static void __init r7780rp_setup(char **cmdline_p)
+{
+ u16 ver = ctrl_inw(PA_VERREG);
+ int i;
+
+ device_initcall(r7780rp_devices_setup);
+
+ printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
+
+ printk(KERN_INFO "Board version: %d (revision %d), "
+ "FPGA version: %d (revision %d)\n",
+ (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+ (ver >> 4) & 0xf, ver & 0xf);
+
+ /*
+ * Enable the important clocks right away..
+ */
+ for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
+ struct clk *clk = r7780rp_clocks[i];
+
+ clk_register(clk);
+ clk_enable(clk);
+ }
+
+ ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
+#ifndef CONFIG_SH_R7780MP
+ ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
+#endif
+ ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL); /* Si13112 */
+
+ pm_power_off = r7780rp_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_r7780rp __initmv = {
+ .mv_name = "Highlander R7780RP-1",
+ .mv_setup = r7780rp_setup,
+
+ .mv_nr_irqs = 109,
+
+ .mv_inb = r7780rp_inb,
+ .mv_inw = r7780rp_inw,
+ .mv_inl = r7780rp_inl,
+ .mv_outb = r7780rp_outb,
+ .mv_outw = r7780rp_outw,
+ .mv_outl = r7780rp_outl,
+
+ .mv_inb_p = r7780rp_inb_p,
+ .mv_inw_p = r7780rp_inw,
+ .mv_inl_p = r7780rp_inl,
+ .mv_outb_p = r7780rp_outb_p,
+ .mv_outw_p = r7780rp_outw,
+ .mv_outl_p = r7780rp_outl,
+
+ .mv_insb = r7780rp_insb,
+ .mv_insw = r7780rp_insw,
+ .mv_insl = r7780rp_insl,
+ .mv_outsb = r7780rp_outsb,
+ .mv_outsw = r7780rp_outsw,
+ .mv_outsl = r7780rp_outsl,
+
+ .mv_ioport_map = r7780rp_ioport_map,
+ .mv_init_irq = init_r7780rp_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_r7780rp,
+#endif
+};
+ALIAS_MV(r7780rp)
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/renesas/rts7751r2d/Kconfig
new file mode 100644
index 0000000..7780d1fb
--- /dev/null
+++ b/arch/sh/boards/renesas/rts7751r2d/Kconfig
@@ -0,0 +1,12 @@
+if SH_RTS7751R2D
+
+menu "RTS7751R2D options"
+
+config RTS7751R2D_REV11
+ bool "RTS7751R2D Rev. 1.1 board support"
+ help
+ Selecting this option will support version rev. 1.1.
+endmenu
+
+endif
+
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile
index daa5333..686fc9e 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/renesas/rts7751r2d/Makefile
@@ -1,10 +1,6 @@
#
# Makefile for the RTS7751R2D specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-obj-y := mach.o setup.o io.o irq.o led.o
-
+obj-y := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c
index 123abbb..135aa0b 100644
--- a/arch/sh/boards/renesas/rts7751r2d/io.c
+++ b/arch/sh/boards/renesas/rts7751r2d/io.c
@@ -1,6 +1,4 @@
/*
- * linux/arch/sh/kernel/io_rts7751r2d.c
- *
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
@@ -10,16 +8,12 @@
* placeholder code from io_rts7751r2d.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/addrspace.h>
-
-#include <linux/module.h>
#include <linux/pci.h>
-#include "../../../drivers/pci/pci-sh7751.h"
+#include <asm/rts7751r2d/rts7751r2d.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
/*
* The 7751R RTS7751R2D uses the built-in PCI controller (PCIC)
@@ -28,22 +22,6 @@
* like the other Solution Engine boards.
*/
-#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
static inline unsigned long port2adr(unsigned int port)
{
if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
@@ -52,7 +30,7 @@
else
return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1));
else
- maybebadio(port2adr, (unsigned long)port);
+ maybebadio((unsigned long)port);
return port;
}
@@ -81,17 +59,6 @@
return 1;
}
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
- ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
#define CHECK_AX88796L_PORT(port) \
((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
@@ -112,8 +79,8 @@
return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
else if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- return *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*(volatile unsigned short *)port2adr(port) & 0xff);
}
@@ -126,11 +93,12 @@
v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
else if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- v = *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*(volatile unsigned short *)port2adr(port) & 0xff);
- delay();
+
+ ctrl_delay();
return v;
}
@@ -138,13 +106,13 @@
unsigned short rts7751r2d_inw(unsigned long port)
{
if (CHECK_AX88796L_PORT(port))
- maybebadio(inw, port);
+ maybebadio(port);
else if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- return *(volatile unsigned short *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return *(volatile unsigned short *)pci_ioaddr(port);
else
- maybebadio(inw, port);
+ maybebadio(port);
return 0;
}
@@ -152,13 +120,13 @@
unsigned int rts7751r2d_inl(unsigned long port)
{
if (CHECK_AX88796L_PORT(port))
- maybebadio(inl, port);
+ maybebadio(port);
else if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- return *(volatile unsigned long *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ return *(volatile unsigned long *)pci_ioaddr(port);
else
- maybebadio(inl, port);
+ maybebadio(port);
return 0;
}
@@ -169,8 +137,8 @@
*((volatile unsigned short *)port88796l(port, 0)) = value;
else if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *(volatile unsigned char *)PCI_IOMAP(port) = value;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ *(volatile unsigned char *)pci_ioaddr(port) = value;
else
*(volatile unsigned short *)port2adr(port) = value;
}
@@ -181,144 +149,153 @@
*((volatile unsigned short *)port88796l(port, 0)) = value;
else if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *(volatile unsigned char *)PCI_IOMAP(port) = value;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ *(volatile unsigned char *)pci_ioaddr(port) = value;
else
*(volatile unsigned short *)port2adr(port) = value;
- delay();
+
+ ctrl_delay();
}
void rts7751r2d_outw(unsigned short value, unsigned long port)
{
if (CHECK_AX88796L_PORT(port))
- maybebadio(outw, port);
+ maybebadio(port);
else if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *(volatile unsigned short *)PCI_IOMAP(port) = value;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ *(volatile unsigned short *)pci_ioaddr(port) = value;
else
- maybebadio(outw, port);
+ maybebadio(port);
}
void rts7751r2d_outl(unsigned int value, unsigned long port)
{
if (CHECK_AX88796L_PORT(port))
- maybebadio(outl, port);
+ maybebadio(port);
else if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- *(volatile unsigned long *)PCI_IOMAP(port) = value;
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ *(volatile unsigned long *)pci_ioaddr(port) = value;
else
- maybebadio(outl, port);
+ maybebadio(port);
}
void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count)
{
+ unsigned long a = (unsigned long)addr;
volatile __u8 *bp;
volatile __u16 *p;
- unsigned char *s = addr;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile unsigned short *)port88796l(port, 0);
- while (count--) *s++ = *p & 0xff;
+ while (count--)
+ ctrl_outb(*p & 0xff, a++);
} else if (PXSEG(port))
- while (count--) *s++ = *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- bp = (__u8 *)PCI_IOMAP(port);
- while (count--) *s++ = *bp;
+ while (count--)
+ ctrl_outb(ctrl_inb(port), a++);
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ bp = (__u8 *)pci_ioaddr(port);
+ while (count--)
+ ctrl_outb(*bp, a++);
} else {
p = (volatile unsigned short *)port2adr(port);
- while (count--) *s++ = *p & 0xff;
+ while (count--)
+ ctrl_outb(*p & 0xff, a++);
}
}
void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count)
{
+ unsigned long a = (unsigned long)addr;
volatile __u16 *p;
- __u16 *s = addr;
if (CHECK_AX88796L_PORT(port))
p = (volatile unsigned short *)port88796l(port, 1);
else if (PXSEG(port))
p = (volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- p = (volatile unsigned short *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ p = (volatile unsigned short *)pci_ioaddr(port);
else
p = (volatile unsigned short *)port2adr(port);
- while (count--) *s++ = *p;
+ while (count--)
+ ctrl_outw(*p, a++);
}
void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count)
{
if (CHECK_AX88796L_PORT(port))
- maybebadio(insl, port);
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
- __u32 *s = addr;
+ maybebadio(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ unsigned long a = (unsigned long)addr;
- while (count--) *s++ = *p;
+ while (count--) {
+ ctrl_outl(ctrl_inl(pci_ioaddr(port)), a);
+ a += 4;
+ }
} else
- maybebadio(insl, port);
+ maybebadio(port);
}
void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count)
{
+ unsigned long a = (unsigned long)addr;
volatile __u8 *bp;
volatile __u16 *p;
- const __u8 *s = addr;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile unsigned short *)port88796l(port, 0);
- while (count--) *p = *s++;
+ while (count--)
+ *p = ctrl_inb(a++);
} else if (PXSEG(port))
- while (count--) *(volatile unsigned char *)port = *s++;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- bp = (__u8 *)PCI_IOMAP(port);
- while (count--) *bp = *s++;
+ while (count--)
+ ctrl_outb(a++, port);
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ bp = (__u8 *)pci_ioaddr(port);
+ while (count--)
+ *bp = ctrl_inb(a++);
} else {
p = (volatile unsigned short *)port2adr(port);
- while (count--) *p = *s++;
+ while (count--)
+ *p = ctrl_inb(a++);
}
}
void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count)
{
+ unsigned long a = (unsigned long)addr;
volatile __u16 *p;
- const __u16 *s = addr;
if (CHECK_AX88796L_PORT(port))
p = (volatile unsigned short *)port88796l(port, 1);
else if (PXSEG(port))
p = (volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port))
- p = (volatile unsigned short *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port))
+ p = (volatile unsigned short *)pci_ioaddr(port);
else
p = (volatile unsigned short *)port2adr(port);
- while (count--) *p = *s++;
+
+ while (count--) {
+ ctrl_outw(*p, a);
+ a += 2;
+ }
}
void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count)
{
if (CHECK_AX88796L_PORT(port))
- maybebadio(outsl, port);
- else if (CHECK_SH7751_PCIIO(port) || shifted_port(port)) {
- volatile __u32 *p = (__u32 *)PCI_IOMAP(port);
- const __u32 *s = addr;
+ maybebadio(port);
+ else if (is_pci_ioaddr(port) || shifted_port(port)) {
+ unsigned long a = (unsigned long)addr;
- while (count--) *p = *s++;
+ while (count--) {
+ ctrl_outl(ctrl_inl(a), pci_ioaddr(port));
+ a += 4;
+ }
} else
- maybebadio(outsl, port);
+ maybebadio(port);
}
-void *rts7751r2d_ioremap(unsigned long offset, unsigned long size)
-{
- if (offset >= 0xfd000000)
- return (void *)offset;
- else
- return (void *)P2SEGADDR(offset);
-}
-EXPORT_SYMBOL(rts7751r2d_ioremap);
-
unsigned long rts7751r2d_isa_port2addr(unsigned long offset)
{
return port2adr(offset);
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c
index 1545354..c915e7a 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/renesas/rts7751r2d/irq.c
@@ -41,30 +41,24 @@
static void disable_rts7751r2d_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short val;
unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
/* Set the priority in IPR to 0 */
- local_irq_save(flags);
val = ctrl_inw(IRLCNTR1);
val &= mask;
ctrl_outw(val, IRLCNTR1);
- local_irq_restore(flags);
}
static void enable_rts7751r2d_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short val;
unsigned short value = (0x0001 << mask_pos[irq]);
/* Set priority in IPR back to original value */
- local_irq_save(flags);
val = ctrl_inw(IRLCNTR1);
val |= value;
ctrl_outw(val, IRLCNTR1);
- local_irq_restore(flags);
}
int rts7751r2d_irq_demux(int irq)
diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c
index 4d16de7..e14a13d 100644
--- a/arch/sh/boards/renesas/rts7751r2d/led.c
+++ b/arch/sh/boards/renesas/rts7751r2d/led.c
@@ -12,8 +12,6 @@
#include <asm/io.h>
#include <asm/rts7751r2d/rts7751r2d.h>
-extern unsigned int debug_counter;
-
#ifdef CONFIG_HEARTBEAT
#include <linux/sched.h>
@@ -55,12 +53,3 @@
ctrl_outw(value, PA_OUTPORT);
}
-void debug_led_disp(void)
-{
- unsigned short value;
-
- value = (unsigned short)debug_counter++;
- rts7751r2d_led(value);
- if (value == 0xff)
- debug_counter = 0;
-}
diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c
deleted file mode 100644
index 5ed9e97..0000000
--- a/arch/sh/boards/renesas/rts7751r2d/mach.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_rts7751r2d.c
- *
- * Minor tweak of mach_se.c file to reference rts7751r2d-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Renesas Technology sales RTS7751R2D
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/irq.h>
-#include <asm/rts7751r2d/io.h>
-
-extern void heartbeat_rts7751r2d(void);
-extern void init_rts7751r2d_IRQ(void);
-extern void *rts7751r2d_ioremap(unsigned long, unsigned long);
-extern int rts7751r2d_irq_demux(int irq);
-
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
-extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_rts7751r2d __initmv = {
- .mv_nr_irqs = 72,
-
- .mv_inb = rts7751r2d_inb,
- .mv_inw = rts7751r2d_inw,
- .mv_inl = rts7751r2d_inl,
- .mv_outb = rts7751r2d_outb,
- .mv_outw = rts7751r2d_outw,
- .mv_outl = rts7751r2d_outl,
-
- .mv_inb_p = rts7751r2d_inb_p,
- .mv_inw_p = rts7751r2d_inw,
- .mv_inl_p = rts7751r2d_inl,
- .mv_outb_p = rts7751r2d_outb_p,
- .mv_outw_p = rts7751r2d_outw,
- .mv_outl_p = rts7751r2d_outl,
-
- .mv_insb = rts7751r2d_insb,
- .mv_insw = rts7751r2d_insw,
- .mv_insl = rts7751r2d_insl,
- .mv_outsb = rts7751r2d_outsb,
- .mv_outsw = rts7751r2d_outsw,
- .mv_outsl = rts7751r2d_outsl,
-
- .mv_ioremap = rts7751r2d_ioremap,
- .mv_isa_port2addr = rts7751r2d_isa_port2addr,
- .mv_init_irq = init_rts7751r2d_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_rts7751r2d,
-#endif
- .mv_irq_demux = rts7751r2d_irq_demux,
-
-#ifdef CONFIG_USB_OHCI_HCD
- .mv_consistent_alloc = voyagergx_consistent_alloc,
- .mv_consistent_free = voyagergx_consistent_free,
-#endif
-};
-ALIAS_MV(rts7751r2d)
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 2587fd1..20597a6 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -1,31 +1,142 @@
/*
- * linux/arch/sh/kernel/setup_rts7751r2d.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
* Renesas Technology Sales RTS7751R2D Support.
*
- * Modified for RTS7751R2D by
- * Atom Create Engineering Co., Ltd. 2002.
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2004 - 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-
#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
#include <asm/io.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
+#include <asm/machvec.h>
+#include <asm/mach/rts7751r2d.h>
+#include <asm/voyagergx.h>
-unsigned int debug_counter;
+extern void heartbeat_rts7751r2d(void);
+extern void init_rts7751r2d_IRQ(void);
+extern int rts7751r2d_irq_demux(int irq);
-const char *get_system_type(void)
+extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
+extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
+
+static struct plat_serial8250_port uart_platform_data[] = {
+ {
+ .membase = (void *)VOYAGER_UART_BASE,
+ .mapbase = VOYAGER_UART_BASE,
+ .iotype = UPIO_MEM,
+ .irq = VOYAGER_UART0_IRQ,
+ .flags = UPF_BOOT_AUTOCONF,
+ .regshift = 2,
+ .uartclk = (9600 * 16),
+ }, {
+ .flags = 0,
+ },
+};
+
+static void __init voyagergx_serial_init(void)
{
- return "RTS7751R2D";
+ unsigned long val;
+
+ /*
+ * GPIO Control
+ */
+ val = inl(GPIO_MUX_HIGH);
+ val |= 0x00001fe0;
+ outl(val, GPIO_MUX_HIGH);
+
+ /*
+ * Power Mode Gate
+ */
+ val = inl(POWER_MODE0_GATE);
+ val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1);
+ outl(val, POWER_MODE0_GATE);
+
+ val = inl(POWER_MODE1_GATE);
+ val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1);
+ outl(val, POWER_MODE1_GATE);
+}
+
+static struct platform_device uart_device = {
+ .name = "serial8250",
+ .id = -1,
+ .dev = {
+ .platform_data = uart_platform_data,
+ },
+};
+
+static struct platform_device *rts7751r2d_devices[] __initdata = {
+ &uart_device,
+};
+
+static int __init rts7751r2d_devices_setup(void)
+{
+ return platform_add_devices(rts7751r2d_devices,
+ ARRAY_SIZE(rts7751r2d_devices));
+}
+
+static void rts7751r2d_power_off(void)
+{
+ ctrl_outw(0x0001, PA_POWOFF);
}
/*
* Initialize the board
*/
-void __init platform_setup(void)
+static void __init rts7751r2d_setup(char **cmdline_p)
{
- printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
+ device_initcall(rts7751r2d_devices_setup);
+
ctrl_outw(0x0000, PA_OUTPORT);
- debug_counter = 0;
+ pm_power_off = rts7751r2d_power_off;
+
+ voyagergx_serial_init();
+
+ printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_rts7751r2d __initmv = {
+ .mv_name = "RTS7751R2D",
+ .mv_setup = rts7751r2d_setup,
+ .mv_nr_irqs = 72,
+
+ .mv_inb = rts7751r2d_inb,
+ .mv_inw = rts7751r2d_inw,
+ .mv_inl = rts7751r2d_inl,
+ .mv_outb = rts7751r2d_outb,
+ .mv_outw = rts7751r2d_outw,
+ .mv_outl = rts7751r2d_outl,
+
+ .mv_inb_p = rts7751r2d_inb_p,
+ .mv_inw_p = rts7751r2d_inw,
+ .mv_inl_p = rts7751r2d_inl,
+ .mv_outb_p = rts7751r2d_outb_p,
+ .mv_outw_p = rts7751r2d_outw,
+ .mv_outl_p = rts7751r2d_outl,
+
+ .mv_insb = rts7751r2d_insb,
+ .mv_insw = rts7751r2d_insw,
+ .mv_insl = rts7751r2d_insl,
+ .mv_outsb = rts7751r2d_outsb,
+ .mv_outsw = rts7751r2d_outsw,
+ .mv_outsl = rts7751r2d_outsl,
+
+ .mv_init_irq = init_rts7751r2d_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_rts7751r2d,
+#endif
+ .mv_irq_demux = rts7751r2d_irq_demux,
+
+#ifdef CONFIG_USB_SM501
+ .mv_consistent_alloc = voyagergx_consistent_alloc,
+ .mv_consistent_free = voyagergx_consistent_free,
+#endif
+};
+ALIAS_MV(rts7751r2d)
diff --git a/arch/sh/boards/renesas/sh7710voipgw/Makefile b/arch/sh/boards/renesas/sh7710voipgw/Makefile
new file mode 100644
index 0000000..7703756
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7710voipgw/Makefile
@@ -0,0 +1 @@
+obj-y := setup.o
diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c
new file mode 100644
index 0000000..e57e7af
--- /dev/null
+++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c
@@ -0,0 +1,109 @@
+/*
+ * Renesas Technology SH7710 VoIP Gateway
+ *
+ * Copyright (C) 2006 Ranjit Deshpande
+ * Kenati Technologies Inc.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <asm/machvec.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Initialize IRQ setting
+ */
+static void __init sh7710voipgw_init_irq(void)
+{
+ /* Disable all interrupts in IPR registers */
+ ctrl_outw(0x0, INTC_IPRA);
+ ctrl_outw(0x0, INTC_IPRB);
+ ctrl_outw(0x0, INTC_IPRC);
+ ctrl_outw(0x0, INTC_IPRD);
+ ctrl_outw(0x0, INTC_IPRE);
+ ctrl_outw(0x0, INTC_IPRF);
+ ctrl_outw(0x0, INTC_IPRG);
+ ctrl_outw(0x0, INTC_IPRH);
+ ctrl_outw(0x0, INTC_IPRI);
+
+ /* Ack all interrupt sources in the IRR0 register */
+ ctrl_outb(0x3f, INTC_IRR0);
+
+ /* Use IRQ0 - IRQ3 as active low interrupt lines i.e. disable
+ * IRL mode.
+ */
+ ctrl_outw(0x2aa, INTC_ICR1);
+
+ /* Now make IPR interrupts */
+ make_ipr_irq(TIMER2_IRQ, TIMER2_IPR_ADDR,
+ TIMER2_IPR_POS, TIMER2_PRIORITY);
+ make_ipr_irq(WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY);
+
+ /* SCIF0 */
+ make_ipr_irq(SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+ SCIF0_PRIORITY);
+ make_ipr_irq(SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+ SCIF0_PRIORITY);
+ make_ipr_irq(SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+ SCIF0_PRIORITY);
+ make_ipr_irq(SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
+ SCIF0_PRIORITY);
+
+ /* DMAC-1 */
+ make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+ make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+ make_ipr_irq(DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+ make_ipr_irq(DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+
+ /* DMAC-2 */
+ make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+ make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+
+ /* IPSEC */
+ make_ipr_irq(IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY);
+
+ /* EDMAC */
+ make_ipr_irq(EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS,
+ EDMAC0_PRIORITY);
+ make_ipr_irq(EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS,
+ EDMAC1_PRIORITY);
+ make_ipr_irq(EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS,
+ EDMAC2_PRIORITY);
+
+ /* SIOF0 */
+ make_ipr_irq(SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+ SIOF0_PRIORITY);
+ make_ipr_irq(SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+ SIOF0_PRIORITY);
+ make_ipr_irq(SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+ SIOF0_PRIORITY);
+ make_ipr_irq(SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
+ SIOF0_PRIORITY);
+
+ /* SIOF1 */
+ make_ipr_irq(SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+ SIOF1_PRIORITY);
+ make_ipr_irq(SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+ SIOF1_PRIORITY);
+ make_ipr_irq(SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+ SIOF1_PRIORITY);
+ make_ipr_irq(SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
+ SIOF1_PRIORITY);
+
+ /* SLIC IRQ's */
+ make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
+ make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh7710voipgw __initmv = {
+ .mv_name = "SH7710 VoIP Gateway",
+ .mv_nr_irqs = 104,
+ .mv_init_irq = sh7710voipgw_init_irq,
+};
+ALIAS_MV(sh7710voipgw)
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/renesas/systemh/io.c
index cf97901..cde6e5d 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/renesas/systemh/io.c
@@ -5,66 +5,25 @@
* Based largely on io_se.c.
*
* I/O routine for Hitachi 7751 Systemh.
- *
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
-#include <asm/systemh/7751systemh.h>
+#include <linux/pci.h>
+#include <asm/systemh7751.h>
#include <asm/addrspace.h>
#include <asm/io.h>
-#include <linux/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
-
-/*
- * The 7751 SystemH Engine uses the built-in PCI controller (PCIC)
- * of the 7751 processor, and has a SuperIO accessible on its memory
- * bus.
- */
-
-#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
of smc lan chip*/
-
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
static inline volatile __u16 *
port2adr(unsigned int port)
{
if (port >= 0x2000)
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#if 0
- else
- return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-#endif
- maybebadio(name,(unsigned long)port);
+ maybebadio((unsigned long)port);
return (volatile __u16*)port;
}
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
- ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -76,8 +35,8 @@
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
return *(volatile unsigned char *)ETHER_IOMAP(port);
else
@@ -90,13 +49,13 @@
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- v = *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ v = *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
v = *(volatile unsigned char *)ETHER_IOMAP(port);
else
v = (*port2adr(port))&0xff;
- delay();
+ ctrl_delay();
return v;
}
@@ -104,14 +63,14 @@
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned short *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
return *(volatile unsigned int *)ETHER_IOMAP(port);
else
- maybebadio(inw, port);
+ maybebadio(port);
return 0;
}
@@ -119,14 +78,14 @@
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned int *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
return *(volatile unsigned int *)ETHER_IOMAP(port);
else
- maybebadio(inl, port);
+ maybebadio(port);
return 0;
}
@@ -135,8 +94,8 @@
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
@@ -147,37 +106,37 @@
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
*(port2adr(port)) = value;
- delay();
+ ctrl_delay();
}
void sh7751systemh_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned short *)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else if (port <= 0x3F1)
*(volatile unsigned short *)ETHER_IOMAP(port) = value;
else
- maybebadio(outw, port);
+ maybebadio(port);
}
void sh7751systemh_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned long*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned long*)pci_ioaddr(port)) = value;
else
- maybebadio(outl, port);
+ maybebadio(port);
}
void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
@@ -194,7 +153,7 @@
void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
{
- maybebadio(insl, port);
+ maybebadio(port);
}
void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
@@ -211,73 +170,5 @@
void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
{
- maybebadio(outsw, port);
-}
-
-/* For read/write calls, just copy generic (pass-thru); PCIMBR is */
-/* already set up. For a larger memory space, these would need to */
-/* reset PCIMBR as needed on a per-call basis... */
-
-unsigned char sh7751systemh_readb(unsigned long addr)
-{
- return *(volatile unsigned char*)addr;
-}
-
-unsigned short sh7751systemh_readw(unsigned long addr)
-{
- return *(volatile unsigned short*)addr;
-}
-
-unsigned int sh7751systemh_readl(unsigned long addr)
-{
- return *(volatile unsigned long*)addr;
-}
-
-void sh7751systemh_writeb(unsigned char b, unsigned long addr)
-{
- *(volatile unsigned char*)addr = b;
-}
-
-void sh7751systemh_writew(unsigned short b, unsigned long addr)
-{
- *(volatile unsigned short*)addr = b;
-}
-
-void sh7751systemh_writel(unsigned int b, unsigned long addr)
-{
- *(volatile unsigned long*)addr = b;
-}
-
-
-
-/* Map ISA bus address to the real address. Only for PCMCIA. */
-
-/* ISA page descriptor. */
-static __u32 sh_isa_memmap[256];
-
-#if 0
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
- int idx;
-
- if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
- return -1;
-
- idx = start >> 12;
- sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
- printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
- start, length, offset, idx, sh_isa_memmap[idx]);
- return 0;
-}
-#endif
-
-unsigned long
-sh7751systemh_isa_port2addr(unsigned long offset)
-{
- int idx;
-
- idx = (offset >> 12) & 0xff;
- offset &= 0xfff;
- return sh_isa_memmap[idx] + offset;
+ maybebadio(port);
}
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c
index 8372d96..8d016da 100644
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ b/arch/sh/boards/renesas/systemh/irq.c
@@ -15,7 +15,7 @@
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/mach/7751systemh.h>
+#include <asm/systemh7751.h>
#include <asm/smc37c93x.h>
/* address of external interrupt mask register
@@ -57,12 +57,9 @@
static void disable_systemh_irq(unsigned int irq)
{
if (systemh_irq_mask_register) {
- unsigned long flags;
unsigned long val, mask = 0x01 << 1;
/* Clear the "irq"th bit in the mask and set it in the request */
- local_irq_save(flags);
-
val = ctrl_inl((unsigned long)systemh_irq_mask_register);
val &= ~mask;
ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
@@ -70,23 +67,18 @@
val = ctrl_inl((unsigned long)systemh_irq_request_register);
val |= mask;
ctrl_outl(val, (unsigned long)systemh_irq_request_register);
-
- local_irq_restore(flags);
}
}
static void enable_systemh_irq(unsigned int irq)
{
if (systemh_irq_mask_register) {
- unsigned long flags;
unsigned long val, mask = 0x01 << 1;
/* Set "irq"th bit in the mask register */
- local_irq_save(flags);
val = ctrl_inl((unsigned long)systemh_irq_mask_register);
val |= mask;
ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
- local_irq_restore(flags);
}
}
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/renesas/systemh/setup.c
index 826fa3d..a8467bf 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/renesas/systemh/setup.c
@@ -15,28 +15,21 @@
* for more details.
*/
#include <linux/init.h>
-#include <asm/mach/7751systemh.h>
-#include <asm/mach/io.h>
#include <asm/machvec.h>
+#include <asm/systemh7751.h>
extern void make_systemh_irq(unsigned int irq);
-const char *get_system_type(void)
-{
- return "7751 SystemH";
-}
-
/*
* Initialize IRQ setting
*/
-void __init init_7751systemh_IRQ(void)
+static void __init sh7751systemh_init_irq(void)
{
-/* make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); LAN */
-/* make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-4); */
make_systemh_irq(0xb); /* Ethernet interrupt */
}
struct sh_machine_vector mv_7751systemh __initmv = {
+ .mv_name = "7751 SystemH",
.mv_nr_irqs = 72,
.mv_inb = sh7751systemh_inb,
@@ -60,21 +53,6 @@
.mv_outsw = sh7751systemh_outsw,
.mv_outsl = sh7751systemh_outsl,
- .mv_readb = sh7751systemh_readb,
- .mv_readw = sh7751systemh_readw,
- .mv_readl = sh7751systemh_readl,
- .mv_writeb = sh7751systemh_writeb,
- .mv_writew = sh7751systemh_writew,
- .mv_writel = sh7751systemh_writel,
-
- .mv_isa_port2addr = sh7751systemh_isa_port2addr,
-
- .mv_init_irq = init_7751systemh_IRQ,
+ .mv_init_irq = sh7751system_init_irq,
};
ALIAS_MV(7751systemh)
-
-int __init platform_setup(void)
-{
- return 0;
-}
-
diff --git a/arch/sh/boards/saturn/setup.c b/arch/sh/boards/saturn/setup.c
index bea6c572..a3a37c9 100644
--- a/arch/sh/boards/saturn/setup.c
+++ b/arch/sh/boards/saturn/setup.c
@@ -9,22 +9,17 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mach/io.h>
extern int saturn_irq_demux(int irq_nr);
-const char *get_system_type(void)
-{
- return "Sega Saturn";
-}
-
/*
* The Machine Vector
*/
struct sh_machine_vector mv_saturn __initmv = {
+ .mv_name = "Sega Saturn",
.mv_nr_irqs = 80, /* Fix this later */
.mv_isa_port2addr = saturn_isa_port2addr,
@@ -33,11 +28,4 @@
.mv_ioremap = saturn_ioremap,
.mv_iounmap = saturn_iounmap,
};
-
ALIAS_MV(saturn)
-
-int __init platform_setup(void)
-{
- return 0;
-}
-
diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c
index f449a94..8a03d7a 100644
--- a/arch/sh/boards/se/7300/io.c
+++ b/arch/sh/boards/se/7300/io.c
@@ -9,8 +9,8 @@
*/
#include <linux/kernel.h>
-#include <asm/mach/se7300.h>
#include <asm/io.h>
+#include <asm/se7300.h>
#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
@@ -99,6 +99,7 @@
badio(inw, port);
}
+#ifdef CONFIG_SMC91X
/* MSTLANEX01 LAN at 0xb400:0000 */
static struct iop laniop = {
.start = 0x300,
@@ -110,6 +111,7 @@
.outb = simple_outb,
.outw = simple_outw,
};
+#endif
/* NE2000 pc card NIC */
static struct iop neiop = {
@@ -123,6 +125,7 @@
.outw = simple_outw,
};
+#ifdef CONFIG_IDE
/* CF in CF slot */
static struct iop cfiop = {
.base = 0xb0600000,
@@ -132,12 +135,13 @@
.outb = pcc_outb,
.outw = simple_outw,
};
+#endif
static __inline__ struct iop *
port2iop(unsigned long port)
{
if (0) ;
-#if defined(CONFIG_SMC91111)
+#if defined(CONFIG_SMC91X)
else if (laniop.check(&laniop, port))
return &laniop;
#endif
diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c
index 216a78d..ad1034f 100644
--- a/arch/sh/boards/se/7300/irq.c
+++ b/arch/sh/boards/se/7300/irq.c
@@ -11,7 +11,7 @@
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/mach/se7300.h>
+#include <asm/se7300.h>
/*
* Initialize IRQ setting
diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c
index ad51f0a..4d03bb7 100644
--- a/arch/sh/boards/se/7300/led.c
+++ b/arch/sh/boards/se/7300/led.c
@@ -12,24 +12,10 @@
*/
#include <linux/sched.h>
-#include <asm/mach/se7300.h>
-
-static void
-mach_led(int position, int value)
-{
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-
- if (value) {
- *p |= (1 << 8);
- } else {
- *p &= ~(1 << 8);
- }
-}
-
+#include <asm/se7300.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void
-heartbeat_7300se(void)
+void heartbeat_7300se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short *p = (volatile unsigned short *) PA_LED;
diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c
index ebcd98d..6f082a72 100644
--- a/arch/sh/boards/se/7300/setup.c
+++ b/arch/sh/boards/se/7300/setup.c
@@ -9,23 +9,16 @@
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/mach/io.h>
+#include <asm/se7300.h>
void heartbeat_7300se(void);
void init_7300se_IRQ(void);
-const char *
-get_system_type(void)
-{
- return "SolutionEngine 7300";
-}
-
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_7300se __initmv = {
+ .mv_name = "SolutionEngine 7300",
.mv_nr_irqs = 109,
.mv_inb = sh7300se_inb,
.mv_inw = sh7300se_inw,
@@ -53,13 +46,4 @@
.mv_heartbeat = heartbeat_7300se,
#endif
};
-
ALIAS_MV(7300se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c
index 755df5a..7271557 100644
--- a/arch/sh/boards/se/73180/io.c
+++ b/arch/sh/boards/se/73180/io.c
@@ -99,6 +99,7 @@
badio(inw, port);
}
+#ifdef CONFIG_SMC91X
/* MSTLANEX01 LAN at 0xb400:0000 */
static struct iop laniop = {
.start = 0x300,
@@ -110,6 +111,7 @@
.outb = simple_outb,
.outw = simple_outw,
};
+#endif
/* NE2000 pc card NIC */
static struct iop neiop = {
@@ -123,6 +125,7 @@
.outw = simple_outw,
};
+#ifdef CONFIG_IDE
/* CF in CF slot */
static struct iop cfiop = {
.base = 0xb0600000,
@@ -132,12 +135,13 @@
.outb = pcc_outb,
.outw = simple_outw,
};
+#endif
static __inline__ struct iop *
port2iop(unsigned long port)
{
if (0) ;
-#if defined(CONFIG_SMC91111)
+#if defined(CONFIG_SMC91X)
else if (laniop.check(&laniop, port))
return &laniop;
#endif
diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c
index 4344d0e..2c62b8e 100644
--- a/arch/sh/boards/se/73180/irq.c
+++ b/arch/sh/boards/se/73180/irq.c
@@ -7,7 +7,6 @@
* Modified for SH-Mobile SolutionEngine 73180 Support
* by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
*
- *
*/
#include <linux/init.h>
@@ -17,14 +16,6 @@
#include <asm/mach/se73180.h>
static int
-intreq2irq(int i)
-{
- if (i == 5)
- return 10;
- return 32 + 7 - i;
-}
-
-static int
irq2intreq(int irq)
{
if (irq == 10)
diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c
index 610439f..4b72e9a 100644
--- a/arch/sh/boards/se/73180/led.c
+++ b/arch/sh/boards/se/73180/led.c
@@ -14,21 +14,8 @@
#include <linux/sched.h>
#include <asm/mach/se73180.h>
-static void
-mach_led(int position, int value)
-{
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-
- if (value) {
- *p |= (1 << LED_SHIFT);
- } else {
- *p &= ~(1 << LED_SHIFT);
- }
-}
-
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void
-heartbeat_73180se(void)
+void heartbeat_73180se(void)
{
static unsigned int cnt = 0, period = 0;
volatile unsigned short *p = (volatile unsigned short *) PA_LED;
diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c
index cdb7b5f..b38ef50 100644
--- a/arch/sh/boards/se/73180/setup.c
+++ b/arch/sh/boards/se/73180/setup.c
@@ -11,23 +11,17 @@
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/mach/io.h>
+#include <asm/se73180.h>
+#include <asm/irq.h>
void heartbeat_73180se(void);
void init_73180se_IRQ(void);
-const char *
-get_system_type(void)
-{
- return "SolutionEngine 73180";
-}
-
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_73180se __initmv = {
+ .mv_name = "SolutionEngine 73180",
.mv_nr_irqs = 108,
.mv_inb = sh73180se_inb,
.mv_inw = sh73180se_inw,
@@ -51,17 +45,9 @@
.mv_outsl = sh73180se_outsl,
.mv_init_irq = init_73180se_IRQ,
+ .mv_irq_demux = shmse_irq_demux,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_73180se,
#endif
};
-
ALIAS_MV(73180se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile
new file mode 100644
index 0000000..4291069
--- /dev/null
+++ b/arch/sh/boards/se/7343/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the 7343 SolutionEngine specific parts of the kernel
+#
+
+obj-y := setup.o io.o irq.o
+
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c
new file mode 100644
index 0000000..646661a
--- /dev/null
+++ b/arch/sh/boards/se/7343/io.c
@@ -0,0 +1,275 @@
+/*
+ * arch/sh/boards/se/7343/io.c
+ *
+ * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/mach/se7343.h>
+
+#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
+
+struct iop {
+ unsigned long start, end;
+ unsigned long base;
+ struct iop *(*check) (struct iop * p, unsigned long port);
+ unsigned char (*inb) (struct iop * p, unsigned long port);
+ unsigned short (*inw) (struct iop * p, unsigned long port);
+ void (*outb) (struct iop * p, unsigned char value, unsigned long port);
+ void (*outw) (struct iop * p, unsigned short value, unsigned long port);
+};
+
+struct iop *
+simple_check(struct iop *p, unsigned long port)
+{
+ static int count;
+
+ if (count < 100)
+ count++;
+
+ port &= 0xFFFF;
+
+ if ((p->start <= port) && (port <= p->end))
+ return p;
+ else
+ badio(check, port);
+}
+
+struct iop *
+ide_check(struct iop *p, unsigned long port)
+{
+ if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
+ return p;
+ return NULL;
+}
+
+unsigned char
+simple_inb(struct iop *p, unsigned long port)
+{
+ return *(unsigned char *) (p->base + port);
+}
+
+unsigned short
+simple_inw(struct iop *p, unsigned long port)
+{
+ return *(unsigned short *) (p->base + port);
+}
+
+void
+simple_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+ *(unsigned char *) (p->base + port) = value;
+}
+
+void
+simple_outw(struct iop *p, unsigned short value, unsigned long port)
+{
+ *(unsigned short *) (p->base + port) = value;
+}
+
+unsigned char
+pcc_inb(struct iop *p, unsigned long port)
+{
+ unsigned long addr = p->base + port + 0x40000;
+ unsigned long v;
+
+ if (port & 1)
+ addr += 0x00400000;
+ v = *(volatile unsigned char *) addr;
+ return v;
+}
+
+void
+pcc_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+ unsigned long addr = p->base + port + 0x40000;
+
+ if (port & 1)
+ addr += 0x00400000;
+ *(volatile unsigned char *) addr = value;
+}
+
+unsigned char
+bad_inb(struct iop *p, unsigned long port)
+{
+ badio(inb, port);
+}
+
+void
+bad_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+ badio(inw, port);
+}
+
+#ifdef CONFIG_SMC91X
+/* MSTLANEX01 LAN at 0xb400:0000 */
+static struct iop laniop = {
+ .start = 0x00,
+ .end = 0x0F,
+ .base = 0x04000000,
+ .check = simple_check,
+ .inb = simple_inb,
+ .inw = simple_inw,
+ .outb = simple_outb,
+ .outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_NE2000
+/* NE2000 pc card NIC */
+static struct iop neiop = {
+ .start = 0x280,
+ .end = 0x29f,
+ .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */
+ .check = simple_check,
+ .inb = pcc_inb,
+ .inw = simple_inw,
+ .outb = pcc_outb,
+ .outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_IDE
+/* CF in CF slot */
+static struct iop cfiop = {
+ .base = 0xb0600000,
+ .check = ide_check,
+ .inb = pcc_inb,
+ .inw = simple_inw,
+ .outb = pcc_outb,
+ .outw = simple_outw,
+};
+#endif
+
+static __inline__ struct iop *
+port2iop(unsigned long port)
+{
+ if (0) ;
+#if defined(CONFIG_SMC91X)
+ else if (laniop.check(&laniop, port))
+ return &laniop;
+#endif
+#if defined(CONFIG_NE2000)
+ else if (neiop.check(&neiop, port))
+ return &neiop;
+#endif
+#if defined(CONFIG_IDE)
+ else if (cfiop.check(&cfiop, port))
+ return &cfiop;
+#endif
+ else
+ return NULL;
+}
+
+static inline void
+delay(void)
+{
+ ctrl_inw(0xac000000);
+ ctrl_inw(0xac000000);
+}
+
+unsigned char
+sh7343se_inb(unsigned long port)
+{
+ struct iop *p = port2iop(port);
+ return (p->inb) (p, port);
+}
+
+unsigned char
+sh7343se_inb_p(unsigned long port)
+{
+ unsigned char v = sh7343se_inb(port);
+ delay();
+ return v;
+}
+
+unsigned short
+sh7343se_inw(unsigned long port)
+{
+ struct iop *p = port2iop(port);
+ return (p->inw) (p, port);
+}
+
+unsigned int
+sh7343se_inl(unsigned long port)
+{
+ badio(inl, port);
+}
+
+void
+sh7343se_outb(unsigned char value, unsigned long port)
+{
+ struct iop *p = port2iop(port);
+ (p->outb) (p, value, port);
+}
+
+void
+sh7343se_outb_p(unsigned char value, unsigned long port)
+{
+ sh7343se_outb(value, port);
+ delay();
+}
+
+void
+sh7343se_outw(unsigned short value, unsigned long port)
+{
+ struct iop *p = port2iop(port);
+ (p->outw) (p, value, port);
+}
+
+void
+sh7343se_outl(unsigned int value, unsigned long port)
+{
+ badio(outl, port);
+}
+
+void
+sh7343se_insb(unsigned long port, void *addr, unsigned long count)
+{
+ unsigned char *a = addr;
+ struct iop *p = port2iop(port);
+ while (count--)
+ *a++ = (p->inb) (p, port);
+}
+
+void
+sh7343se_insw(unsigned long port, void *addr, unsigned long count)
+{
+ unsigned short *a = addr;
+ struct iop *p = port2iop(port);
+ while (count--)
+ *a++ = (p->inw) (p, port);
+}
+
+void
+sh7343se_insl(unsigned long port, void *addr, unsigned long count)
+{
+ badio(insl, port);
+}
+
+void
+sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+ unsigned char *a = (unsigned char *) addr;
+ struct iop *p = port2iop(port);
+ while (count--)
+ (p->outb) (p, *a++, port);
+}
+
+void
+sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+ unsigned short *a = (unsigned short *) addr;
+ struct iop *p = port2iop(port);
+ while (count--)
+ (p->outw) (p, *a++, port);
+}
+
+void
+sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+ badio(outsw, port);
+}
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
new file mode 100644
index 0000000..b41e3d4
--- /dev/null
+++ b/arch/sh/boards/se/7343/irq.c
@@ -0,0 +1,193 @@
+/*
+ * arch/sh/boards/se/7343/irq.c
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/mach/se7343.h>
+
+static void
+disable_intreq_irq(unsigned int irq)
+{
+ int bit = irq - OFFCHIP_IRQ_BASE;
+ u16 val;
+
+ val = ctrl_inw(PA_CPLD_IMSK);
+ val |= 1 << bit;
+ ctrl_outw(val, PA_CPLD_IMSK);
+}
+
+static void
+enable_intreq_irq(unsigned int irq)
+{
+ int bit = irq - OFFCHIP_IRQ_BASE;
+ u16 val;
+
+ val = ctrl_inw(PA_CPLD_IMSK);
+ val &= ~(1 << bit);
+ ctrl_outw(val, PA_CPLD_IMSK);
+}
+
+static void
+mask_and_ack_intreq_irq(unsigned int irq)
+{
+ disable_intreq_irq(irq);
+}
+
+static unsigned int
+startup_intreq_irq(unsigned int irq)
+{
+ enable_intreq_irq(irq);
+ return 0;
+}
+
+static void
+shutdown_intreq_irq(unsigned int irq)
+{
+ disable_intreq_irq(irq);
+}
+
+static void
+end_intreq_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ enable_intreq_irq(irq);
+}
+
+static struct hw_interrupt_type intreq_irq_type = {
+ .typename = "FPGA-IRQ",
+ .startup = startup_intreq_irq,
+ .shutdown = shutdown_intreq_irq,
+ .enable = enable_intreq_irq,
+ .disable = disable_intreq_irq,
+ .ack = mask_and_ack_intreq_irq,
+ .end = end_intreq_irq
+};
+
+static void
+make_intreq_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &intreq_irq_type;
+ disable_intreq_irq(irq);
+}
+
+int
+shmse_irq_demux(int irq)
+{
+ int bit;
+ volatile u16 val;
+
+ if (irq == IRQ5_IRQ) {
+ /* Read status Register */
+ val = ctrl_inw(PA_CPLD_ST);
+ bit = ffs(val);
+ if (bit != 0)
+ return OFFCHIP_IRQ_BASE + bit - 1;
+ }
+ return irq;
+}
+
+/* IRQ5 is multiplexed between the following sources:
+ * 1. PC Card socket
+ * 2. Extension slot
+ * 3. USB Controller
+ * 4. Serial Controller
+ *
+ * We configure IRQ5 as a cascade IRQ.
+ */
+static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade",
+ NULL, NULL};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init
+init_7343se_IRQ(void)
+{
+ /* Setup Multiplexed interrupts */
+ ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active
+ * low.
+ */
+ /* Mask all CPLD controller interrupts */
+ ctrl_outw(0x0fff, PA_CPLD_IMSK);
+
+ /* PC Card interrupts */
+ make_intreq_irq(PC_IRQ0);
+ make_intreq_irq(PC_IRQ1);
+ make_intreq_irq(PC_IRQ2);
+ make_intreq_irq(PC_IRQ3);
+
+ /* Extension Slot Interrupts */
+ make_intreq_irq(EXT_IRQ0);
+ make_intreq_irq(EXT_IRQ1);
+ make_intreq_irq(EXT_IRQ2);
+ make_intreq_irq(EXT_IRQ3);
+
+ /* USB Controller interrupts */
+ make_intreq_irq(USB_IRQ0);
+ make_intreq_irq(USB_IRQ1);
+
+ /* Serial Controller interrupts */
+ make_intreq_irq(UART_IRQ0);
+ make_intreq_irq(UART_IRQ1);
+
+ /* Setup all external interrupts to be active low */
+ ctrl_outw(0xaaaa, INTC_ICR1);
+
+ make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY);
+ setup_irq(IRQ5_IRQ, &irq5);
+ /* Set port control to use IRQ5 */
+ *(u16 *)0xA4050108 &= ~0xc;
+
+ make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
+ make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8);
+
+ ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */
+
+ make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+ make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+ make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+ make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
+ make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+ make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
+
+ /* I2C block */
+ make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
+ make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
+ IIC0_PRIORITY);
+ make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
+ IIC0_PRIORITY);
+ make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
+
+ make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
+ make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
+ IIC1_PRIORITY);
+ make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
+ IIC1_PRIORITY);
+ make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
+
+ /* SIOF */
+ make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
+
+ /* SIU */
+ make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY);
+
+ /* VIO interrupt */
+ make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+ make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+ make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+
+ /*MFI interrupt*/
+
+ make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY);
+
+ /* LCD controller */
+ make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY);
+ ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
+}
diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c
new file mode 100644
index 0000000..6a439cf
--- /dev/null
+++ b/arch/sh/boards/se/7343/led.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/boards/se/7343/led.c
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/mach/se7343.h>
+
+/* Cycle the LED's in the clasic Knightrider/Sun pattern */
+void heartbeat_7343se(void)
+{
+ static unsigned int cnt = 0, period = 0;
+ volatile unsigned short *p = (volatile unsigned short *) PA_LED;
+ static unsigned bit = 0, up = 1;
+
+ cnt += 1;
+ if (cnt < period) {
+ return;
+ }
+
+ cnt = 0;
+
+ /* Go through the points (roughly!):
+ * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
+ */
+ period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
+
+ if (up) {
+ if (bit == 7) {
+ bit--;
+ up = 0;
+ } else {
+ bit++;
+ }
+ } else {
+ if (bit == 0) {
+ bit++;
+ up = 1;
+ } else {
+ bit--;
+ }
+ }
+ *p = 1 << (bit + LED_SHIFT);
+
+}
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
new file mode 100644
index 0000000..7873222
--- /dev/null
+++ b/arch/sh/boards/se/7343/setup.c
@@ -0,0 +1,84 @@
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/mach/se7343.h>
+#include <asm/irq.h>
+
+void heartbeat_7343se(void);
+void init_7343se_IRQ(void);
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = 0x10000000,
+ .end = 0x1000000F,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /*
+ * shared with other devices via externel
+ * interrupt controller in FPGA...
+ */
+ .start = EXT_IRQ2,
+ .end = EXT_IRQ2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device *smc91x_platform_devices[] __initdata = {
+ &smc91x_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+ return platform_add_devices(smc91x_platform_devices,
+ ARRAY_SIZE(smc91x_platform_devices));
+}
+
+static void __init sh7343se_setup(char **cmdline_p)
+{
+ device_initcall(sh7343se_devices_setup);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_7343se __initmv = {
+ .mv_name = "SolutionEngine 7343",
+ .mv_setup = sh7343se_setup,
+ .mv_nr_irqs = 108,
+ .mv_inb = sh7343se_inb,
+ .mv_inw = sh7343se_inw,
+ .mv_inl = sh7343se_inl,
+ .mv_outb = sh7343se_outb,
+ .mv_outw = sh7343se_outw,
+ .mv_outl = sh7343se_outl,
+
+ .mv_inb_p = sh7343se_inb_p,
+ .mv_inw_p = sh7343se_inw,
+ .mv_inl_p = sh7343se_inl,
+ .mv_outb_p = sh7343se_outb_p,
+ .mv_outw_p = sh7343se_outw,
+ .mv_outl_p = sh7343se_outl,
+
+ .mv_insb = sh7343se_insb,
+ .mv_insw = sh7343se_insw,
+ .mv_insl = sh7343se_insl,
+ .mv_outsb = sh7343se_outsb,
+ .mv_outsw = sh7343se_outsw,
+ .mv_outsl = sh7343se_outsl,
+
+ .mv_init_irq = init_7343se_IRQ,
+ .mv_irq_demux = shmse_irq_demux,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_7343se,
+#endif
+};
+ALIAS_MV(7343se)
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile
index be89a73..9a5035f 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/se/770x/Makefile
@@ -2,5 +2,5 @@
# Makefile for the 770x SolutionEngine specific parts of the kernel
#
-obj-y := mach.o setup.o io.o irq.o led.o
-
+obj-y := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
index 9a39ee9..9941949 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/se/770x/io.c
@@ -1,4 +1,4 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
+/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
*
* linux/arch/sh/kernel/io_se.c
*
@@ -11,7 +11,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/se/se.h>
+#include <asm/se.h>
/* SH pcmcia io window base, start and end. */
int sh_pcic_io_wbase = 0xb8400000;
@@ -20,11 +20,6 @@
int sh_pcic_io_type;
int sh_pcic_io_dummy;
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
/* MS7750 requires special versions of in*, out* routines, since
PC-like io ports are located at upper half byte of 16-bit word which
can be accessed only with 16-bit wide. */
@@ -52,10 +47,6 @@
return 1;
}
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
unsigned char se_inb(unsigned long port)
{
if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
@@ -76,7 +67,7 @@
v = (*port2adr(port) >> 8);
else
v = (*port2adr(port))&0xff;
- delay();
+ ctrl_delay();
return v;
}
@@ -86,13 +77,13 @@
(sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
return *port2adr(port);
else
- maybebadio(inw, port);
+ maybebadio(port);
return 0;
}
unsigned int se_inl(unsigned long port)
{
- maybebadio(inl, port);
+ maybebadio(port);
return 0;
}
@@ -114,7 +105,7 @@
*(port2adr(port)) = value << 8;
else
*(port2adr(port)) = value;
- delay();
+ ctrl_delay();
}
void se_outw(unsigned short value, unsigned long port)
@@ -123,12 +114,12 @@
(sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
*port2adr(port) = value;
else
- maybebadio(outw, port);
+ maybebadio(port);
}
void se_outl(unsigned int value, unsigned long port)
{
- maybebadio(outl, port);
+ maybebadio(port);
}
void se_insb(unsigned long port, void *addr, unsigned long count)
@@ -159,7 +150,7 @@
void se_insl(unsigned long port, void *addr, unsigned long count)
{
- maybebadio(insl, port);
+ maybebadio(port);
}
void se_outsb(unsigned long port, const void *addr, unsigned long count)
@@ -190,37 +181,5 @@
void se_outsl(unsigned long port, const void *addr, unsigned long count)
{
- maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA. */
-
-/* ISA page descriptor. */
-static __u32 sh_isa_memmap[256];
-
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
- int idx;
-
- if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
- return -1;
-
- idx = start >> 12;
- sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-#if 0
- printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
- start, length, offset, idx, sh_isa_memmap[idx]);
-#endif
- return 0;
-}
-
-unsigned long
-se_isa_port2addr(unsigned long offset)
-{
- int idx;
-
- idx = (offset >> 12) & 0xff;
- offset &= 0xfff;
- return sh_isa_memmap[idx] + offset;
+ maybebadio(port);
}
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
index 3e55871..cff6700 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/se/770x/irq.c
@@ -11,7 +11,7 @@
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se/se.h>
+#include <asm/se.h>
/*
* Initialize IRQ setting
diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c
index 3cddbda..daf7b1e 100644
--- a/arch/sh/boards/se/770x/led.c
+++ b/arch/sh/boards/se/770x/led.c
@@ -9,22 +9,8 @@
* This file contains Solution Engine specific LED code.
*/
-#include <asm/se/se.h>
-
-static void mach_led(int position, int value)
-{
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
- if (value) {
- *p |= (1<<8);
- } else {
- *p &= ~(1<<8);
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-
#include <linux/sched.h>
+#include <asm/se.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_se(void)
@@ -64,4 +50,3 @@
*p = 1<<(bit+8);
}
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/770x/mach.c b/arch/sh/boards/se/770x/mach.c
deleted file mode 100644
index 6ec07bd..0000000
--- a/arch/sh/boards/se/770x/mach.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_se.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi SolutionEngine
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/se/io.h>
-
-void heartbeat_se(void);
-void setup_se(void);
-void init_se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_se __initmv = {
-#if defined(CONFIG_CPU_SH4)
- .mv_nr_irqs = 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
- .mv_nr_irqs = 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
- .mv_nr_irqs = 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
- .mv_nr_irqs = 86,
-#endif
-
- .mv_inb = se_inb,
- .mv_inw = se_inw,
- .mv_inl = se_inl,
- .mv_outb = se_outb,
- .mv_outw = se_outw,
- .mv_outl = se_outl,
-
- .mv_inb_p = se_inb_p,
- .mv_inw_p = se_inw,
- .mv_inl_p = se_inl,
- .mv_outb_p = se_outb_p,
- .mv_outw_p = se_outw,
- .mv_outl_p = se_outl,
-
- .mv_insb = se_insb,
- .mv_insw = se_insw,
- .mv_insl = se_insl,
- .mv_outsb = se_outsb,
- .mv_outsw = se_outsw,
- .mv_outsl = se_outsl,
-
- .mv_isa_port2addr = se_isa_port2addr,
-
- .mv_init_irq = init_se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_se,
-#endif
-};
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 7d1a071..f3f82b7 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -7,15 +7,17 @@
* Hitachi SolutionEngine Support.
*
*/
-
#include <linux/init.h>
#include <linux/irq.h>
-
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/se/se.h>
-#include <asm/se/smc37c93x.h>
+#include <asm/se.h>
+#include <asm/smc37c93x.h>
+#include <asm/machvec.h>
+
+void heartbeat_se(void);
+void init_se_IRQ(void);
/*
* Configure the Super I/O chip
@@ -26,7 +28,8 @@
outb_p(data, DATA_PORT);
}
-static void __init init_smsc(void)
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
{
outb_p(CONFIG_ENTER, CONFIG_PORT);
outb_p(CONFIG_ENTER, CONFIG_PORT);
@@ -69,16 +72,46 @@
outb_p(CONFIG_EXIT, CONFIG_PORT);
}
-const char *get_system_type(void)
-{
- return "SolutionEngine";
-}
-
/*
- * Initialize the board
+ * The Machine Vector
*/
-void __init platform_setup(void)
-{
- init_smsc();
- /* XXX: RTC setting comes here */
-}
+struct sh_machine_vector mv_se __initmv = {
+ .mv_name = "SolutionEngine",
+ .mv_setup = smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+ .mv_nr_irqs = 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+ .mv_nr_irqs = 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+ .mv_nr_irqs = 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+ .mv_nr_irqs = 86,
+#endif
+
+ .mv_inb = se_inb,
+ .mv_inw = se_inw,
+ .mv_inl = se_inl,
+ .mv_outb = se_outb,
+ .mv_outw = se_outw,
+ .mv_outl = se_outl,
+
+ .mv_inb_p = se_inb_p,
+ .mv_inw_p = se_inw,
+ .mv_inl_p = se_inl,
+ .mv_outb_p = se_outb_p,
+ .mv_outw_p = se_outw,
+ .mv_outl_p = se_outl,
+
+ .mv_insb = se_insb,
+ .mv_insw = se_insw,
+ .mv_insl = se_insl,
+ .mv_outsb = se_outsb,
+ .mv_outsw = se_outsw,
+ .mv_outsl = se_outsl,
+
+ .mv_init_irq = init_se_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_se,
+#endif
+};
+ALIAS_MV(se)
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile
index ce7ca24..188900c 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/se/7751/Makefile
@@ -2,7 +2,7 @@
# Makefile for the 7751 SolutionEngine specific parts of the kernel
#
-obj-y := mach.o setup.o io.o irq.o led.o
+obj-y := setup.o io.o irq.o
obj-$(CONFIG_PCI) += pci.o
-
+obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
index 99041b2..e8d846c 100644
--- a/arch/sh/boards/se/7751/io.c
+++ b/arch/sh/boards/se/7751/io.c
@@ -1,6 +1,4 @@
-/*
- * linux/arch/sh/kernel/io_7751se.c
- *
+/*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
@@ -10,96 +8,21 @@
* placeholder code from io_se.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/pci.h>
#include <asm/io.h>
-#include <asm/se7751/se7751.h>
+#include <asm/se7751.h>
#include <asm/addrspace.h>
-#include <linux/pci.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#if 0
-/******************************************************************
- * Variables from io_se.c, related to PCMCIA (not PCI); we're not
- * compiling them in, and have removed references from functions
- * which follow. [Many checked for IO ports in the range bounded
- * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset.
- * As start/stop are uninitialized, only port 0x0 would match?]
- * When used, remember to adjust names to avoid clash with io_se?
- *****************************************************************/
-/* SH pcmcia io window base, start and end. */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-/*************************************************************/
-#endif
-
-/*
- * The 7751 Solution Engine uses the built-in PCI controller (PCIC)
- * of the 7751 processor, and has a SuperIO accessible via the PCI.
- * The board also includes a PCMCIA controller on its memory bus,
- * like the other Solution Engine boards.
- */
-
-#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
+static inline volatile u16 *port2adr(unsigned int port)
{
if (port >= 0x2000)
return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#if 0
- else
- return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-#endif
- maybebadio(name,(unsigned long)port);
+ maybebadio((unsigned long)port);
return (volatile __u16*)port;
}
-#if 0
-/* The 7751 Solution Engine seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int
-shifted_port(unsigned long port)
-{
- /* For IDE registers, value is not shifted */
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- return 0;
- else
- return 1;
-}
-#endif
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
- ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -111,10 +34,10 @@
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned char *)pci_ioaddr(port);
else
- return (*port2adr(port))&0xff;
+ return (*port2adr(port)) & 0xff;
}
unsigned char sh7751se_inb_p(unsigned long port)
@@ -123,11 +46,11 @@
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- v = *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ v = *(volatile unsigned char *)pci_ioaddr(port);
else
- v = (*port2adr(port))&0xff;
- delay();
+ v = (*port2adr(port)) & 0xff;
+ ctrl_delay();
return v;
}
@@ -135,12 +58,12 @@
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned short *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
- maybebadio(inw, port);
+ maybebadio(port);
return 0;
}
@@ -148,12 +71,12 @@
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned int *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
- maybebadio(inl, port);
+ maybebadio(port);
return 0;
}
@@ -162,8 +85,8 @@
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
@@ -172,73 +95,41 @@
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
- delay();
+ ctrl_delay();
}
void sh7751se_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned short *)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
- maybebadio(outw, port);
+ maybebadio(port);
}
void sh7751se_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned long*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned long*)pci_ioaddr(port)) = value;
else
- maybebadio(outl, port);
+ maybebadio(port);
}
void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
{
- maybebadio(insl, port);
+ maybebadio(port);
}
void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
{
- maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA. */
-
-/* ISA page descriptor. */
-static __u32 sh_isa_memmap[256];
-
-#if 0
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
- int idx;
-
- if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
- return -1;
-
- idx = start >> 12;
- sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
- printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
- start, length, offset, idx, sh_isa_memmap[idx]);
- return 0;
-}
-#endif
-
-unsigned long
-sh7751se_isa_port2addr(unsigned long offset)
-{
- int idx;
-
- idx = (offset >> 12) & 0xff;
- offset &= 0xfff;
- return sh_isa_memmap[idx] + offset;
+ maybebadio(port);
}
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
index bf6c023..c607b0a 100644
--- a/arch/sh/boards/se/7751/irq.c
+++ b/arch/sh/boards/se/7751/irq.c
@@ -12,7 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/irq.h>
-#include <asm/se7751/se7751.h>
+#include <asm/se7751.h>
/*
* Initialize IRQ setting
diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c
index a878726..ff0355d 100644
--- a/arch/sh/boards/se/7751/led.c
+++ b/arch/sh/boards/se/7751/led.c
@@ -8,23 +8,8 @@
*
* This file contains Solution Engine specific LED code.
*/
-
-#include <asm/se7751/se7751.h>
-
-static void mach_led(int position, int value)
-{
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
- if (value) {
- *p |= (1<<8);
- } else {
- *p &= ~(1<<8);
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-
#include <linux/sched.h>
+#include <asm/se7751.h>
/* Cycle the LED's in the clasic Knightrider/Sun pattern */
void heartbeat_7751se(void)
@@ -64,4 +49,3 @@
*p = 1<<(bit+8);
}
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c
deleted file mode 100644
index 62d8d3e..0000000
--- a/arch/sh/boards/se/7751/mach.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_7751se.c
- *
- * Minor tweak of mach_se.c file to reference 7751se-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi 7751 SolutionEngine
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/se7751/io.h>
-
-void heartbeat_7751se(void);
-void init_7751se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_7751se __initmv = {
- .mv_nr_irqs = 72,
-
- .mv_inb = sh7751se_inb,
- .mv_inw = sh7751se_inw,
- .mv_inl = sh7751se_inl,
- .mv_outb = sh7751se_outb,
- .mv_outw = sh7751se_outw,
- .mv_outl = sh7751se_outl,
-
- .mv_inb_p = sh7751se_inb_p,
- .mv_inw_p = sh7751se_inw,
- .mv_inl_p = sh7751se_inl,
- .mv_outb_p = sh7751se_outb_p,
- .mv_outw_p = sh7751se_outw,
- .mv_outl_p = sh7751se_outl,
-
- .mv_insl = sh7751se_insl,
- .mv_outsl = sh7751se_outsl,
-
- .mv_isa_port2addr = sh7751se_isa_port2addr,
-
- .mv_init_irq = init_7751se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_7751se,
-#endif
-};
-ALIAS_MV(7751se)
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index 48dc5ae..73e8263 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -1,4 +1,4 @@
-/*
+/*
* linux/arch/sh/kernel/setup_7751se.c
*
* Copyright (C) 2000 Kazumoto Kojima
@@ -11,78 +11,15 @@
#include <linux/init.h>
#include <linux/irq.h>
-
-#include <linux/hdreg.h>
#include <linux/ide.h>
#include <asm/io.h>
-#include <asm/se7751/se7751.h>
+#include <asm/se7751.h>
+
+void heartbeat_7751se(void);
+void init_7751se_IRQ(void);
#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
-#endif
-
-/*
- * Configure the Super I/O chip
- */
-#if 0
-/* Leftover code from regular Solution Engine, for reference. */
-/* The SH7751 Solution Engine has a different SuperIO. */
-static void __init smsc_config(int index, int data)
-{
- outb_p(index, INDEX_PORT);
- outb_p(data, DATA_PORT);
-}
-
-static void __init init_smsc(void)
-{
- outb_p(CONFIG_ENTER, CONFIG_PORT);
- outb_p(CONFIG_ENTER, CONFIG_PORT);
-
- /* FDC */
- smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
- /* IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_IDE1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */
-
- /* AUXIO (GPIO): to use IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
- smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
- smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
- /* COM1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x03);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
- /* COM2 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x02);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
- /* RTC */
- smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
- /* XXX: PARPORT, KBD, and MOUSE will come here... */
- outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-#endif
-
-const char *get_system_type(void)
-{
- return "7751 SolutionEngine";
-}
-
-#ifdef CONFIG_SH_KGDB
static int kgdb_uart_setup(void);
static struct kgdb_sermap kgdb_uart_sermap =
{ "ttyS", 0, kgdb_uart_setup, NULL };
@@ -91,7 +28,7 @@
/*
* Initialize the board
*/
-void __init platform_setup(void)
+static void __init sh7751se_setup(char **cmdline_p)
{
/* Call init_smsc() replacement to set up SuperIO. */
/* XXX: RTC setting comes here */
@@ -225,3 +162,37 @@
return 0;
}
#endif /* CONFIG_SH_KGDB */
+
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_7751se __initmv = {
+ .mv_name = "7751 SolutionEngine",
+ .mv_setup = sh7751se_setup,
+ .mv_nr_irqs = 72,
+
+ .mv_inb = sh7751se_inb,
+ .mv_inw = sh7751se_inw,
+ .mv_inl = sh7751se_inl,
+ .mv_outb = sh7751se_outb,
+ .mv_outw = sh7751se_outw,
+ .mv_outl = sh7751se_outl,
+
+ .mv_inb_p = sh7751se_inb_p,
+ .mv_inw_p = sh7751se_inw,
+ .mv_inl_p = sh7751se_inl,
+ .mv_outb_p = sh7751se_outb_p,
+ .mv_outw_p = sh7751se_outw,
+ .mv_outl_p = sh7751se_outl,
+
+ .mv_insl = sh7751se_insl,
+ .mv_outsl = sh7751se_outsl,
+
+ .mv_init_irq = init_7751se_IRQ,
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = heartbeat_7751se,
+#endif
+};
+ALIAS_MV(7751se)
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/sh03/rtc.c
index d609863..0a9266b 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/sh03/rtc.c
@@ -10,9 +10,10 @@
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/bcd.h>
-#include <asm/io.h>
#include <linux/rtc.h>
#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
#define RTC_BASE 0xb0000000
#define RTC_SEC1 (RTC_BASE + 0)
@@ -34,8 +35,6 @@
#define RTC_BUSY 1
#define RTC_STOP 2
-extern void (*rtc_get_time)(struct timespec *);
-extern int (*rtc_set_time)(const time_t);
extern spinlock_t rtc_lock;
unsigned long get_cmos_time(void)
@@ -128,6 +127,6 @@
void sh03_time_init(void)
{
- rtc_get_time = sh03_rtc_gettimeofday;
- rtc_set_time = sh03_rtc_settimeofday;
+ rtc_sh_get_time = sh03_rtc_gettimeofday;
+ rtc_sh_set_time = sh03_rtc_settimeofday;
}
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
index 60290f8..6c31058 100644
--- a/arch/sh/boards/sh03/setup.c
+++ b/arch/sh/boards/sh03/setup.c
@@ -7,22 +7,13 @@
#include <linux/init.h>
#include <linux/irq.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
#include <asm/io.h>
+#include <asm/rtc.h>
#include <asm/sh03/io.h>
#include <asm/sh03/sh03.h>
#include <asm/addrspace.h>
-#include "../../drivers/pci/pci-sh7751.h"
-extern void (*board_time_init)(void);
-
-const char *get_system_type(void)
-{
- return "Interface CTP/PCI-SH03)";
-}
-
-void init_sh03_IRQ(void)
+static void __init init_sh03_IRQ(void)
{
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
@@ -34,38 +25,34 @@
extern void *cf_io_base;
-unsigned long sh03_isa_port2addr(unsigned long port)
+static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
{
if (PXSEG(port))
- return port;
+ return (void __iomem *)port;
/* CompactFlash (IDE) */
- if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6)) {
- return (unsigned long)cf_io_base + port;
- }
- return port + SH7751_PCI_IO_BASE;
+ if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
+ return (void __iomem *)((unsigned long)cf_io_base + port);
+
+ return (void __iomem *)(port + PCI_IO_BASE);
}
-/*
- * The Machine Vector
- */
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+ board_time_init = sh03_time_init;
+}
struct sh_machine_vector mv_sh03 __initmv = {
+ .mv_name = "Interface (CTP/PCI-SH03)",
+ .mv_setup = sh03_setup,
.mv_nr_irqs = 48,
- .mv_isa_port2addr = sh03_isa_port2addr,
+ .mv_ioport_map = sh03_ioport_map,
.mv_init_irq = init_sh03_IRQ,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = heartbeat_sh03,
#endif
};
-
ALIAS_MV(sh03)
-
-/* arch/sh/boards/sh03/rtc.c */
-void sh03_time_init(void);
-
-int __init platform_setup(void)
-{
- board_time_init = sh03_time_init;
- return 0;
-}
diff --git a/arch/sh/boards/sh2000/Makefile b/arch/sh/boards/sh2000/Makefile
deleted file mode 100644
index 05d390c..0000000
--- a/arch/sh/boards/sh2000/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the SH2000 specific parts of the kernel
-#
-
-obj-y := setup.o
-
diff --git a/arch/sh/boards/sh2000/setup.c b/arch/sh/boards/sh2000/setup.c
deleted file mode 100644
index 2fe6a11..0000000
--- a/arch/sh/boards/sh2000/setup.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/sh/kernel/setup_sh2000.c
- *
- * Copyright (C) 2001 SUGIOKA Tochinobu
- *
- * SH-2000 Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mach/sh2000.h>
-
-#define CF_CIS_BASE 0xb4200000
-
-#define PORT_PECR 0xa4000108
-#define PORT_PHCR 0xa400010E
-#define PORT_ICR1 0xa4000010
-#define PORT_IRR0 0xa4000004
-
-#define IDE_OFFSET 0xb6200000
-#define NIC_OFFSET 0xb6000000
-#define EXTBUS_OFFSET 0xba000000
-
-
-const char *get_system_type(void)
-{
- return "sh2000";
-}
-
-static unsigned long sh2000_isa_port2addr(unsigned long offset)
-{
- if((offset & ~7) == 0x1f0 || offset == 0x3f6)
- return IDE_OFFSET + offset;
- else if((offset & ~0x1f) == 0x300)
- return NIC_OFFSET + offset;
- return EXTBUS_OFFSET + offset;
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_sh2000 __initmv = {
- .mv_nr_irqs = 80,
- .mv_isa_port2addr = sh2000_isa_port2addr,
-};
-ALIAS_MV(sh2000)
-
-/*
- * Initialize the board
- */
-int __init platform_setup(void)
-{
- /* XXX: RTC setting comes here */
-
- /* These should be done by BIOS/IPL ... */
- /* Enable nCE2A, nCE2B output */
- ctrl_outw(ctrl_inw(PORT_PECR) & ~0xf00, PORT_PECR);
- /* Enable the Compact Flash card, and set the level interrupt */
- ctrl_outw(0x0042, CF_CIS_BASE+0x0200);
- /* Enable interrupt */
- ctrl_outw(ctrl_inw(PORT_PHCR) & ~0x03f3, PORT_PHCR);
- ctrl_outw(1, PORT_ICR1);
- ctrl_outw(ctrl_inw(PORT_IRR0) & ~0xff3f, PORT_IRR0);
- printk(KERN_INFO "SH-2000 Setup...done\n");
- return 0;
-}
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
new file mode 100644
index 0000000..3190cc7
--- /dev/null
+++ b/arch/sh/boards/shmin/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the SHMIN board.
+#
+
+obj-y := setup.o
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c
new file mode 100644
index 0000000..2f0c197
--- /dev/null
+++ b/arch/sh/boards/shmin/setup.c
@@ -0,0 +1,41 @@
+/*
+ * arch/sh/boards/shmin/setup.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII
+ *
+ * SHMIN Support.
+ */
+#include <linux/init.h>
+#include <asm/machvec.h>
+#include <asm/shmin/shmin.h>
+#include <asm/clock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#define PFC_PHCR 0xa400010e
+
+static void __init init_shmin_irq(void)
+{
+ ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
+ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
+}
+
+static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
+{
+ static int dummy;
+
+ if ((port & ~0x1f) == SHMIN_NE_BASE)
+ return (void __iomem *)(SHMIN_IO_BASE + port);
+
+ dummy = 0;
+
+ return &dummy;
+
+}
+
+struct sh_machine_vector mv_shmin __initmv = {
+ .mv_name = "SHMIN",
+ .mv_init_irq = init_shmin_irq,
+ .mv_ioport_map = shmin_ioport_map,
+};
+ALIAS_MV(shmin)
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c
index e2eb78f..0f48242 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/snapgear/io.c
@@ -1,6 +1,4 @@
-/*
- * linux/arch/sh/kernel/io_7751se.c
- *
+/*
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
@@ -11,67 +9,22 @@
* placeholder code from io_se.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/addrspace.h>
-#include <asm/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
-
#ifdef CONFIG_SH_SECUREEDGE5410
unsigned short secureedge5410_ioport;
#endif
-/*
- * The SnapGear uses the built-in PCI controller (PCIC)
- * of the 7751 processor
- */
-
-#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
-
-
-#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
-
static inline volatile __u16 *port2adr(unsigned int port)
{
-#if 0
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#endif
- maybebadio(name,(unsigned long)port);
+ maybebadio((unsigned long)port);
return (volatile __u16*)port;
}
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
- ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -79,148 +32,106 @@
* should be way beyond the window, and is used w/o translation for
* compatibility.
*/
-
unsigned char snapgear_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned char *)pci_ioaddr(port);
else
- return (*port2adr(port))&0xff;
+ return (*port2adr(port)) & 0xff;
}
-
unsigned char snapgear_inb_p(unsigned long port)
{
unsigned char v;
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- v = *(volatile unsigned char *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ v = *(volatile unsigned char *)pci_ioaddr(port);
else
- v = (*port2adr(port))&0xff;
- delay();
+ v = (*port2adr(port))&0xff;
+ ctrl_delay();
return v;
}
-
unsigned short snapgear_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned short *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
- maybebadio(inw, port);
+ maybebadio(port);
return 0;
}
-
unsigned int snapgear_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned int *)PCI_IOMAP(port);
+ else if (is_pci_ioaddr(port))
+ return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
- maybebadio(inl, port);
+ maybebadio(port);
return 0;
}
-
void snapgear_outb(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
-
void snapgear_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
- delay();
+ ctrl_delay();
}
-
void snapgear_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned short *)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
- maybebadio(outw, port);
+ maybebadio(port);
}
-
void snapgear_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned long*)PCI_IOMAP(port)) = value;
+ else if (is_pci_ioaddr(port))
+ *((unsigned long*)pci_ioaddr(port)) = value;
else
- maybebadio(outl, port);
+ maybebadio(port);
}
void snapgear_insl(unsigned long port, void *addr, unsigned long count)
{
- maybebadio(insl, port);
+ maybebadio(port);
}
void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
{
- maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA. */
-
-
-/* ISA page descriptor. */
-static __u32 sh_isa_memmap[256];
-
-
-#if 0
-static int sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
- int idx;
-
- if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
- return -1;
-
- idx = start >> 12;
- sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-#if 0
- printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
- start, length, offset, idx, sh_isa_memmap[idx]);
-#endif
- return 0;
-}
-#endif
-
-unsigned long snapgear_isa_port2addr(unsigned long offset)
-{
- int idx;
-
- idx = (offset >> 12) & 0xff;
- offset &= 0xfff;
- return sh_isa_memmap[idx] + offset;
+ maybebadio(port);
}
diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c
index b71e009..1659fdd 100644
--- a/arch/sh/boards/snapgear/rtc.c
+++ b/arch/sh/boards/snapgear/rtc.c
@@ -17,14 +17,9 @@
#include <linux/time.h>
#include <linux/rtc.h>
#include <linux/mc146818rtc.h>
-
#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/mc146818rtc.h>
-/****************************************************************************/
-
-static int use_ds1302 = 0;
+static int use_ds1302;
/****************************************************************************/
/*
@@ -82,10 +77,6 @@
unsigned int val;
unsigned long flags;
-#if 0
- printk("SnapGear RTC: ds1302_readbyte(addr=%x)\n", addr);
-#endif
-
local_irq_save(flags);
set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
@@ -104,10 +95,6 @@
{
unsigned long flags;
-#if 0
- printk("SnapGear RTC: ds1302_writebyte(addr=%x)\n", addr);
-#endif
-
local_irq_save(flags);
set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK);
set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK));
@@ -168,11 +155,8 @@
}
if (use_ds1302) {
- rtc_get_time = snapgear_rtc_gettimeofday;
- rtc_set_time = snapgear_rtc_settimeofday;
- } else {
- rtc_get_time = sh_rtc_gettimeofday;
- rtc_set_time = sh_rtc_settimeofday;
+ rtc_sh_get_time = snapgear_rtc_gettimeofday;
+ rtc_sh_set_time = snapgear_rtc_settimeofday;
}
printk("SnapGear RTC: using %s rtc.\n", use_ds1302 ? "ds1302" : "internal");
@@ -187,10 +171,8 @@
{
unsigned int sec, min, hr, day, mon, yr;
- if (!use_ds1302) {
- sh_rtc_gettimeofday(ts);
+ if (!use_ds1302)
return;
- }
sec = bcd2int(ds1302_readbyte(RTC_ADDR_SEC));
min = bcd2int(ds1302_readbyte(RTC_ADDR_MIN));
@@ -231,7 +213,7 @@
unsigned long nowtime;
if (!use_ds1302)
- return sh_rtc_settimeofday(secs);
+ return 0;
/*
* This is called direct from the kernel timer handling code.
@@ -240,10 +222,6 @@
nowtime = secs;
-#if 1
- printk("SnapGear RTC: snapgear_rtc_settimeofday(nowtime=%ld)\n", nowtime);
-#endif
-
/* STOP RTC */
ds1302_writebyte(RTC_ADDR_SEC, ds1302_readbyte(RTC_ADDR_SEC) | 0x80);
@@ -329,5 +307,3 @@
default: break;
}
}
-
-/****************************************************************************/
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
index f1f7c70..f5e98c5 100644
--- a/arch/sh/boards/snapgear/setup.c
+++ b/arch/sh/boards/snapgear/setup.c
@@ -1,5 +1,4 @@
-/****************************************************************************/
-/*
+/*
* linux/arch/sh/boards/snapgear/setup.c
*
* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
@@ -12,8 +11,6 @@
* Modified for 7751 Solution Engine by
* Ian da Silva and Jeremy Siegel, 2001.
*/
-/****************************************************************************/
-
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
@@ -21,14 +18,13 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/sched.h>
-
#include <asm/machvec.h>
-#include <asm/mach/io.h>
+#include <asm/snapgear.h>
#include <asm/irq.h>
#include <asm/io.h>
+#include <asm/rtc.h>
#include <asm/cpu/timer.h>
-extern void (*board_time_init)(void);
extern void secureedge5410_rtc_init(void);
extern void pcibios_init(void);
@@ -85,101 +81,20 @@
make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
}
-/****************************************************************************/
/*
- * Fast poll interrupt simulator.
+ * Initialize the board
*/
-
-/*
- * Leave all of the fast timer/fast poll stuff commented out for now, since
- * it's not clear whether it actually works or not. Since it wasn't being used
- * at all in 2.4, we'll assume it's not sane for 2.6 either.. -- PFM
- */
-#if 0
-#define FAST_POLL 1000
-//#define FAST_POLL_INTR
-
-#define FASTTIMER_IRQ 17
-#define FASTTIMER_IPR_ADDR INTC_IPRA
-#define FASTTIMER_IPR_POS 2
-#define FASTTIMER_PRIORITY 3
-
-#ifdef FAST_POLL_INTR
-#define TMU1_TCR_INIT 0x0020
-#else
-#define TMU1_TCR_INIT 0
-#endif
-#define TMU_TSTR_INIT 1
-#define TMU1_TCR_CALIB 0x0000
-
-
-#ifdef FAST_POLL_INTR
-static void fast_timer_irq(int irq, void *dev_instance, struct pt_regs *regs)
+static void __init snapgear_setup(char **cmdline_p)
{
- unsigned long timer_status;
- timer_status = ctrl_inw(TMU1_TCR);
- timer_status &= ~0x100;
- ctrl_outw(timer_status, TMU1_TCR);
-}
-#endif
-
-/*
- * return the current ticks on the fast timer
- */
-
-unsigned long fast_timer_count(void)
-{
- return(ctrl_inl(TMU1_TCNT));
-}
-
-/*
- * setup a fast timer for profiling etc etc
- */
-
-static void setup_fast_timer()
-{
- unsigned long interval;
-
-#ifdef FAST_POLL_INTR
- interval = (current_cpu_data.module_clock/4 + FAST_POLL/2) / FAST_POLL;
-
- make_ipr_irq(FASTTIMER_IRQ, FASTTIMER_IPR_ADDR, FASTTIMER_IPR_POS,
- FASTTIMER_PRIORITY);
-
- printk("SnapGear: %dHz fast timer on IRQ %d\n",FAST_POLL,FASTTIMER_IRQ);
-
- if (request_irq(FASTTIMER_IRQ, fast_timer_irq, 0, "SnapGear fast timer",
- NULL) != 0)
- printk("%s(%d): request_irq() failed?\n", __FILE__, __LINE__);
-#else
- printk("SnapGear: fast timer running\n",FAST_POLL,FASTTIMER_IRQ);
- interval = 0xffffffff;
-#endif
-
- ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x2, TMU_TSTR); /* disable timer 1 */
- ctrl_outw(TMU1_TCR_INIT, TMU1_TCR);
- ctrl_outl(interval, TMU1_TCOR);
- ctrl_outl(interval, TMU1_TCNT);
- ctrl_outb(ctrl_inb(TMU_TSTR) | 0x2, TMU_TSTR); /* enable timer 1 */
-
- printk("Timer count 1 = 0x%x\n", fast_timer_count());
- udelay(1000);
- printk("Timer count 2 = 0x%x\n", fast_timer_count());
-}
-#endif
-
-/****************************************************************************/
-
-const char *get_system_type(void)
-{
- return "SnapGear SecureEdge5410";
+ board_time_init = secureedge5410_rtc_init;
}
/*
* The Machine Vector
*/
-
struct sh_machine_vector mv_snapgear __initmv = {
+ .mv_name = "SnapGear SecureEdge5410",
+ .mv_setup = snapgear_setup,
.mv_nr_irqs = 72,
.mv_inb = snapgear_inb,
@@ -196,20 +111,6 @@
.mv_outw_p = snapgear_outw,
.mv_outl_p = snapgear_outl,
- .mv_isa_port2addr = snapgear_isa_port2addr,
-
.mv_init_irq = init_snapgear_IRQ,
};
ALIAS_MV(snapgear)
-
-/*
- * Initialize the board
- */
-
-int __init platform_setup(void)
-{
- board_time_init = secureedge5410_rtc_init;
-
- return 0;
-}
-
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c
index 236398f..8c64baa 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/superh/microdev/irq.c
@@ -11,14 +11,12 @@
#include <linux/init.h>
#include <linux/irq.h>
-
#include <asm/system.h>
#include <asm/io.h>
#include <asm/microdev.h>
#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
-
static const struct {
unsigned char fpgaIrq;
unsigned char mapped;
@@ -93,53 +91,42 @@
static void disable_microdev_irq(unsigned int irq)
{
- unsigned int flags;
unsigned int fpgaIrq;
- if (irq >= NUM_EXTERNAL_IRQS) return;
- if (!fpgaIrqTable[irq].mapped) return;
+ if (irq >= NUM_EXTERNAL_IRQS)
+ return;
+ if (!fpgaIrqTable[irq].mapped)
+ return;
fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
- /* disable interrupts */
- local_irq_save(flags);
-
- /* disable interupts on the FPGA INTC register */
+ /* disable interupts on the FPGA INTC register */
ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-
- /* restore interrupts */
- local_irq_restore(flags);
}
static void enable_microdev_irq(unsigned int irq)
{
unsigned long priorityReg, priorities, pri;
- unsigned int flags;
unsigned int fpgaIrq;
-
- if (irq >= NUM_EXTERNAL_IRQS) return;
- if (!fpgaIrqTable[irq].mapped) return;
+ if (unlikely(irq >= NUM_EXTERNAL_IRQS))
+ return;
+ if (unlikely(!fpgaIrqTable[irq].mapped))
+ return;
pri = 15 - irq;
fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
- /* disable interrupts */
- local_irq_save(flags);
-
- /* set priority for the interrupt */
+ /* set priority for the interrupt */
priorities = ctrl_inl(priorityReg);
priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
ctrl_outl(priorities, priorityReg);
- /* enable interupts on the FPGA INTC register */
+ /* enable interupts on the FPGA INTC register */
ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-
- /* restore interrupts */
- local_irq_restore(flags);
}
/* This functions sets the desired irq handler to be a MicroDev type */
@@ -158,9 +145,7 @@
static void end_microdev_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- {
enable_microdev_irq(irq);
- }
}
extern void __init init_microdev_irq(void)
@@ -171,9 +156,7 @@
ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
- {
make_microdev_irq(i);
- }
}
extern void microdev_print_fpga_intc_status(void)
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
index 61b402a..031c814 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/superh/microdev/setup.c
@@ -10,7 +10,6 @@
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*/
-
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
@@ -21,41 +20,6 @@
extern void microdev_heartbeat(void);
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_sh4202_microdev __initmv = {
- .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
-
- .mv_inb = microdev_inb,
- .mv_inw = microdev_inw,
- .mv_inl = microdev_inl,
- .mv_outb = microdev_outb,
- .mv_outw = microdev_outw,
- .mv_outl = microdev_outl,
-
- .mv_inb_p = microdev_inb_p,
- .mv_inw_p = microdev_inw_p,
- .mv_inl_p = microdev_inl_p,
- .mv_outb_p = microdev_outb_p,
- .mv_outw_p = microdev_outw_p,
- .mv_outl_p = microdev_outl_p,
-
- .mv_insb = microdev_insb,
- .mv_insw = microdev_insw,
- .mv_insl = microdev_insl,
- .mv_outsb = microdev_outsb,
- .mv_outsw = microdev_outsw,
- .mv_outsl = microdev_outsl,
-
- .mv_init_irq = init_microdev_irq,
-
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = microdev_heartbeat,
-#endif
-};
-ALIAS_MV(sh4202_microdev)
/****************************************************************************/
@@ -113,11 +77,6 @@
/* assume a Keyboard Controller is present */
int microdev_kbd_controller_present = 1;
-const char *get_system_type(void)
-{
- return "SH4-202 MicroDev";
-}
-
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x300,
@@ -291,25 +250,9 @@
return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
}
-__initcall(microdev_devices_setup);
-
-void __init platform_setup(void)
-{
- int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
- const int fpgaRevision = *fpgaRevisionRegister;
- int * const CacheControlRegister = (int*)CCR;
-
- printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
- get_system_type(), fpgaRevision, *CacheControlRegister);
-}
-
-
-/****************************************************************************/
-
-
- /*
- * Setup for the SMSC FDC37C93xAPM
- */
+/*
+ * Setup for the SMSC FDC37C93xAPM
+ */
static int __init smsc_superio_setup(void)
{
@@ -412,8 +355,52 @@
return 0;
}
+static void __init microdev_setup(char **cmdline_p)
+{
+ int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
+ const int fpgaRevision = *fpgaRevisionRegister;
+ int * const CacheControlRegister = (int*)CCR;
-/* This is grotty, but, because kernel is always referenced on the link line
- * before any devices, this is safe.
+ device_initcall(microdev_devices_setup);
+ device_initcall(smsc_superio_setup);
+
+ printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
+ get_system_type(), fpgaRevision, *CacheControlRegister);
+}
+
+/*
+ * The Machine Vector
*/
-__initcall(smsc_superio_setup);
+struct sh_machine_vector mv_sh4202_microdev __initmv = {
+ .mv_name = "SH4-202 MicroDev",
+ .mv_setup = microdev_setup,
+ .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
+
+ .mv_inb = microdev_inb,
+ .mv_inw = microdev_inw,
+ .mv_inl = microdev_inl,
+ .mv_outb = microdev_outb,
+ .mv_outw = microdev_outw,
+ .mv_outl = microdev_outl,
+
+ .mv_inb_p = microdev_inb_p,
+ .mv_inw_p = microdev_inw_p,
+ .mv_inl_p = microdev_inl_p,
+ .mv_outb_p = microdev_outb_p,
+ .mv_outw_p = microdev_outw_p,
+ .mv_outl_p = microdev_outl_p,
+
+ .mv_insb = microdev_insb,
+ .mv_insw = microdev_insw,
+ .mv_insl = microdev_insl,
+ .mv_outsb = microdev_outsb,
+ .mv_outsw = microdev_outsw,
+ .mv_outsl = microdev_outsl,
+
+ .mv_init_irq = init_microdev_irq,
+
+#ifdef CONFIG_HEARTBEAT
+ .mv_heartbeat = microdev_heartbeat,
+#endif
+};
+ALIAS_MV(sh4202_microdev)
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/titan/Makefile
new file mode 100644
index 0000000..08d7537
--- /dev/null
+++ b/arch/sh/boards/titan/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Nimble Microsystems TITAN specific parts of the kernel
+#
+
+obj-y := setup.o io.o
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/titan/io.c
new file mode 100644
index 0000000..4730c1d
--- /dev/null
+++ b/arch/sh/boards/titan/io.c
@@ -0,0 +1,126 @@
+/*
+ * I/O routines for Titan
+ */
+#include <linux/pci.h>
+#include <asm/machvec.h>
+#include <asm/addrspace.h>
+#include <asm/titan.h>
+#include <asm/io.h>
+
+static inline unsigned int port2adr(unsigned int port)
+{
+ maybebadio((unsigned long)port);
+ return port;
+}
+
+u8 titan_inb(unsigned long port)
+{
+ if (PXSEG(port))
+ return ctrl_inb(port);
+ else if (is_pci_ioaddr(port))
+ return ctrl_inb(pci_ioaddr(port));
+ return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 titan_inb_p(unsigned long port)
+{
+ u8 v;
+
+ if (PXSEG(port))
+ v = ctrl_inb(port);
+ else if (is_pci_ioaddr(port))
+ v = ctrl_inb(pci_ioaddr(port));
+ else
+ v = ctrl_inw(port2adr(port)) & 0xff;
+ ctrl_delay();
+ return v;
+}
+
+u16 titan_inw(unsigned long port)
+{
+ if (PXSEG(port))
+ return ctrl_inw(port);
+ else if (is_pci_ioaddr(port))
+ return ctrl_inw(pci_ioaddr(port));
+ else if (port >= 0x2000)
+ return ctrl_inw(port2adr(port));
+ else
+ maybebadio(port);
+ return 0;
+}
+
+u32 titan_inl(unsigned long port)
+{
+ if (PXSEG(port))
+ return ctrl_inl(port);
+ else if (is_pci_ioaddr(port))
+ return ctrl_inl(pci_ioaddr(port));
+ else if (port >= 0x2000)
+ return ctrl_inw(port2adr(port));
+ else
+ maybebadio(port);
+ return 0;
+}
+
+void titan_outb(u8 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outb(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outb(value, pci_ioaddr(port));
+ else
+ ctrl_outw(value, port2adr(port));
+}
+
+void titan_outb_p(u8 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outb(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outb(value, pci_ioaddr(port));
+ else
+ ctrl_outw(value, port2adr(port));
+ ctrl_delay();
+}
+
+void titan_outw(u16 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outw(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outw(value, pci_ioaddr(port));
+ else if (port >= 0x2000)
+ ctrl_outw(value, port2adr(port));
+ else
+ maybebadio(port);
+}
+
+void titan_outl(u32 value, unsigned long port)
+{
+ if (PXSEG(port))
+ ctrl_outl(value, port);
+ else if (is_pci_ioaddr(port))
+ ctrl_outl(value, pci_ioaddr(port));
+ else
+ maybebadio(port);
+}
+
+void titan_insl(unsigned long port, void *dst, unsigned long count)
+{
+ maybebadio(port);
+}
+
+void titan_outsl(unsigned long port, const void *src, unsigned long count)
+{
+ maybebadio(port);
+}
+
+void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
+{
+ if (PXSEG(port) || is_pci_memaddr(port))
+ return (void __iomem *)port;
+ else if (is_pci_ioaddr(port))
+ return (void __iomem *)pci_ioaddr(port);
+
+ return (void __iomem *)port2adr(port);
+}
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
new file mode 100644
index 0000000..52b66d8
--- /dev/null
+++ b/arch/sh/boards/titan/setup.c
@@ -0,0 +1,48 @@
+/*
+ * Setup for Titan
+ */
+
+#include <linux/init.h>
+#include <asm/irq.h>
+#include <asm/titan.h>
+#include <asm/io.h>
+
+extern void __init pcibios_init_platform(void);
+
+static void __init init_titan_irq(void)
+{
+ /* enable individual interrupt mode for externals */
+ ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+
+ make_ipr_irq( TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); /* PCIRQ0 */
+ make_ipr_irq( TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); /* PCIRQ1 */
+ make_ipr_irq( TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); /* PCIRQ2 */
+ make_ipr_irq( TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */
+}
+
+struct sh_machine_vector mv_titan __initmv = {
+ .mv_name = "Titan",
+
+ .mv_inb = titan_inb,
+ .mv_inw = titan_inw,
+ .mv_inl = titan_inl,
+ .mv_outb = titan_outb,
+ .mv_outw = titan_outw,
+ .mv_outl = titan_outl,
+
+ .mv_inb_p = titan_inb_p,
+ .mv_inw_p = titan_inw,
+ .mv_inl_p = titan_inl,
+ .mv_outb_p = titan_outb_p,
+ .mv_outw_p = titan_outw,
+ .mv_outl_p = titan_outl,
+
+ .mv_insl = titan_insl,
+ .mv_outsl = titan_outsl,
+
+ .mv_ioport_map = titan_ioport_map,
+
+ .mv_init_irq = init_titan_irq,
+ .mv_init_pci = pcibios_init_platform,
+};
+ALIAS_MV(titan)
diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c
index c5e4ed1..1c94137 100644
--- a/arch/sh/boards/unknown/setup.c
+++ b/arch/sh/boards/unknown/setup.c
@@ -14,19 +14,8 @@
*/
#include <linux/init.h>
#include <asm/machvec.h>
-#include <asm/irq.h>
struct sh_machine_vector mv_unknown __initmv = {
- .mv_nr_irqs = NR_IRQS,
+ .mv_name = "Unknown",
};
ALIAS_MV(unknown)
-
-const char *get_system_type(void)
-{
- return "Unknown";
-}
-
-void __init platform_setup(void)
-{
-}
-
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 75a6876..e5f4437 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -18,13 +18,20 @@
# Assign dummy values if these 2 variables are not defined,
# in order to suppress error message.
#
+CONFIG_PAGE_OFFSET ?= 0x80000000
CONFIG_MEMORY_START ?= 0x0c000000
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
-IMAGE_OFFSET := $(shell printf "0x%8x" $$[0x80000000+$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)])
+
+IMAGE_OFFSET := $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET) + \
+ $(CONFIG_MEMORY_START) + \
+ $(CONFIG_BOOT_LINK_OFFSET)])
+
+LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
$(call if_changed,ld)
@:
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index 155d139..0582ca8 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -65,6 +65,11 @@
Do not change this unless you know what you are doing.
+config HD64461_IOBASE
+ hex "HD64461 start address"
+ depends on HD64461
+ default "0xb0000000"
+
config HD64461_ENABLER
bool "HD64461 PCMCIA enabler"
depends on HD64461
@@ -73,7 +78,6 @@
via the HD64461 companion chip.
Otherwise, say N.
-
config HD64465_IOBASE
hex "HD64465 start address"
depends on HD64465
diff --git a/arch/sh/cchips/hd6446x/hd64461/io.c b/arch/sh/cchips/hd6446x/hd64461/io.c
index ac30626..7909a1b 100644
--- a/arch/sh/cchips/hd6446x/hd64461/io.c
+++ b/arch/sh/cchips/hd6446x/hd64461/io.c
@@ -1,11 +1,10 @@
/*
- * $Id: io.c,v 1.6 2004/03/16 00:07:50 lethal Exp $
* Copyright (C) 2000 YAEGASHI Takeshi
* Typical I/O routines for HD64461 system.
*/
#include <asm/io.h>
-#include <asm/hd64461/hd64461.h>
+#include <asm/hd64461.h>
#define MEM_BASE (CONFIG_HD64461_IOBASE - HD64461_STBCR)
@@ -54,11 +53,6 @@
return 0xa0000000 + (port & 0x1fffffff);
}
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
unsigned char hd64461_inb(unsigned long port)
{
return *(volatile unsigned char*)PORT2ADDR(port);
@@ -67,7 +61,7 @@
unsigned char hd64461_inb_p(unsigned long port)
{
unsigned long v = *(volatile unsigned char*)PORT2ADDR(port);
- delay();
+ ctrl_delay();
return v;
}
@@ -89,7 +83,7 @@
void hd64461_outb_p(unsigned char b, unsigned long port)
{
*(volatile unsigned char*)PORT2ADDR(port) = b;
- delay();
+ ctrl_delay();
}
void hd64461_outw(unsigned short b, unsigned long port)
@@ -144,13 +138,13 @@
while(count--) *addr=*buf++;
}
-unsigned short hd64461_readw(unsigned long addr)
+unsigned short hd64461_readw(void __iomem *addr)
{
- return *(volatile unsigned short*)(MEM_BASE+addr);
+ return ctrl_inw(MEM_BASE+(unsigned long __force)addr);
}
-void hd64461_writew(unsigned short b, unsigned long addr)
+void hd64461_writew(unsigned short b, void __iomem *addr)
{
- *(volatile unsigned short*)(MEM_BASE+addr) = b;
+ ctrl_outw(b, MEM_BASE+(unsigned long __force)addr);
}
diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c
index ad12601..38f1e81 100644
--- a/arch/sh/cchips/hd6446x/hd64461/setup.c
+++ b/arch/sh/cchips/hd6446x/hd64461/setup.c
@@ -11,36 +11,28 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>
-
#include <asm/io.h>
#include <asm/irq.h>
-
-#include <asm/hd64461/hd64461.h>
+#include <asm/hd64461.h>
static void disable_hd64461_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64461_IRQBASE);
- local_irq_save(flags);
nimr = inw(HD64461_NIMR);
nimr |= mask;
outw(nimr, HD64461_NIMR);
- local_irq_restore(flags);
}
static void enable_hd64461_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64461_IRQBASE);
- local_irq_save(flags);
nimr = inw(HD64461_NIMR);
nimr &= ~mask;
outw(nimr, HD64461_NIMR);
- local_irq_restore(flags);
}
static void mask_and_ack_hd64461(unsigned int irq)
diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c
index d2b2851..30573d3 100644
--- a/arch/sh/cchips/hd6446x/hd64465/setup.c
+++ b/arch/sh/cchips/hd6446x/hd64465/setup.c
@@ -25,31 +25,25 @@
static void disable_hd64465_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
- local_irq_save(flags);
nimr = inw(HD64465_REG_NIMR);
nimr |= mask;
outw(nimr, HD64465_REG_NIMR);
- local_irq_restore(flags);
}
static void enable_hd64465_irq(unsigned int irq)
{
- unsigned long flags;
unsigned short nimr;
unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
- local_irq_save(flags);
nimr = inw(HD64465_REG_NIMR);
nimr &= ~mask;
outw(nimr, HD64465_REG_NIMR);
- local_irq_restore(flags);
}
diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c
index 0dc1fb8..392c8b1 100644
--- a/arch/sh/cchips/voyagergx/irq.c
+++ b/arch/sh/cchips/voyagergx/irq.c
@@ -32,37 +32,30 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/rts7751r2d/voyagergx_reg.h>
+#include <asm/voyagergx.h>
static void disable_voyagergx_irq(unsigned int irq)
{
- unsigned long flags, val;
- unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
+ unsigned long val;
+ unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
- local_irq_save(flags);
val = inl(VOYAGER_INT_MASK);
val &= ~mask;
outl(val, VOYAGER_INT_MASK);
- local_irq_restore(flags);
}
-
static void enable_voyagergx_irq(unsigned int irq)
{
- unsigned long flags, val;
- unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
+ unsigned long val;
+ unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
- local_irq_save(flags);
val = inl(VOYAGER_INT_MASK);
val |= mask;
outl(val, VOYAGER_INT_MASK);
- local_irq_restore(flags);
}
-
static void mask_and_ack_voyagergx(unsigned int irq)
{
disable_voyagergx_irq(irq);
@@ -95,7 +88,8 @@
.end = end_voyagergx_irq,
};
-static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t voyagergx_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
{
printk(KERN_INFO
"VoyagerGX: spurious interrupt, status: 0x%x\n",
@@ -103,9 +97,6 @@
return IRQ_HANDLED;
}
-
-/*====================================================*/
-
static struct {
int (*func)(int, void *);
void *dev;
diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c
index 139ca88..66b2fed 100644
--- a/arch/sh/cchips/voyagergx/setup.c
+++ b/arch/sh/cchips/voyagergx/setup.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/rts7751r2d/voyagergx_reg.h>
+#include <asm/voyagergx.h>
static int __init setup_voyagergx(void)
{
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
new file mode 100644
index 0000000..6b43316
--- /dev/null
+++ b/arch/sh/configs/landisk_defconfig
@@ -0,0 +1,1373 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.13-sh
+# Sun Sep 11 13:00:46 2005
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+CONFIG_HEARTBEAT=y
+
+#
+# Kernel features
+#
+CONFIG_KEXEC=y
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+CONFIG_PCI_LEGACY_PROC=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+# CONFIG_IP_NF_MATCH_CONNBYTES is not set
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_OFFBOARD=y
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_IDEDMA_ONLYDISK=y
+CONFIG_BLK_DEV_AEC62XX=y
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_IDE_SH=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NE2000 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_RS5C313_RTC=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FONT_8x16=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_OBSOLETE_OSS_USB_DRIVER=y
+CONFIG_USB_AUDIO=m
+# CONFIG_USB_BLUETOOTH_TTY is not set
+CONFIG_USB_MIDI=m
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_PWC=m
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_UFS_FS=m
+CONFIG_UFS_FS_WRITE=y
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_FRAME_POINTER is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig
new file mode 100644
index 0000000..d597fc5
--- /dev/null
+++ b/arch/sh/configs/r7780rp_defconfig
@@ -0,0 +1,1099 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.15-sh
+# Sat Jan 7 19:47:53 2006
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R77703DRP is not set
+CONFIG_SH_R7780RP=y
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_32BIT=y
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=32000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=6
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_KEXEC is not set
+CONFIG_PREEMPT=y
+# CONFIG_SMP is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/hda1"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDE_SATA=y
+CONFIG_BLK_DEV_IDEDISK=m
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=m
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_AEC62XX=m
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=m
+# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=m
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_IDE_SH=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=m
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NE2000=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=m
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+CONFIG_PRISM54=m
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/sh/configs/se73180_defconfig b/arch/sh/configs/se73180_defconfig
index d217e44..fe19feb 100644
--- a/arch/sh/configs/se73180_defconfig
+++ b/arch/sh/configs/se73180_defconfig
@@ -78,6 +78,7 @@
# CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set
# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
# CONFIG_SH_UNKNOWN is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
new file mode 100644
index 0000000..948e507
--- /dev/null
+++ b/arch/sh/configs/se7343_defconfig
@@ -0,0 +1,997 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Aug 7 20:14:44 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+CONFIG_SH_7343_SOLUTION_ENGINE=y
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_32BIT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=27000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+CONFIG_HEARTBEAT=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SOLUTIONENGINE is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+CONFIG_I2C_SH7343=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Encoders and Decoders
+#
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_MIXER_OSS is not set
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SuperH devices
+#
+CONFIG_SH7343_SIU=m
+CONFIG_AK4537_CODEC=y
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
new file mode 100644
index 0000000..ec9a3034
--- /dev/null
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -0,0 +1,913 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Aug 7 17:07:06 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+CONFIG_SH_7710VOIPGW=y
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH3=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+CONFIG_CPU_SUBTYPE_SH7710=y
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=32768000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=y
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=y
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_U32=y
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_SOLUTIONENGINE is not set
+CONFIG_MTD_SH7710VOIPGW=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_NE2000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+CONFIG_PHONE=y
+# CONFIG_PHONE_IXJ is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
new file mode 100644
index 0000000..382b3bd
--- /dev/null
+++ b/arch/sh/configs/shmin_defconfig
@@ -0,0 +1,827 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Wed Aug 2 01:45:03 2006
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PTRACE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_UID16 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SHMEM is not set
+# CONFIG_SLAB is not set
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+CONFIG_SLOB=y
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7709_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_SHMIN=y
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH3=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+CONFIG_CPU_SUBTYPE_SH7706=y
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ=32000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_KEXEC is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00210000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xa0000000
+CONFIG_MTD_PHYSMAP_LEN=0x80000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_NE2000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_SYSFS is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNWIND_INFO is not set
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
new file mode 100644
index 0000000..1db2904
--- /dev/null
+++ b/arch/sh/configs/titan_defconfig
@@ -0,0 +1,1367 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-sh
+# Wed Nov 9 00:35:56 2005
+#
+CONFIG_SUPERH=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+CONFIG_SH_TITAN=y
+# CONFIG_SH_STB1_HARP is not set
+# CONFIG_SH_STB1_OVERDRIVE is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_CQREEK is not set
+# CONFIG_SH_DMIDA is not set
+# CONFIG_SH_EC3104 is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_CAT68701 is not set
+# CONFIG_SH_BIGSUR is not set
+# CONFIG_SH_SH2000 is not set
+# CONFIG_SH_ADX is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_MEMORY_START=0x08030000
+CONFIG_MEMORY_SIZE=0x7fd0000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SH_RTC=y
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=30000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=8
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Kernel features
+#
+# CONFIG_KEXEC is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x009e0000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+CONFIG_PCI_LEGACY_PROC=y
+#CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_ROUTE_FWMARK is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+CONFIG_IP_ROUTE_MULTIPATH_RR=m
+CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
+CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
+CONFIG_IP_ROUTE_MULTIPATH_DRR=m
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_NETBIOS_NS=m
+CONFIG_IP_NF_TFTP=m
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_PHYSDEV is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_NET_CLS_IND=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+CONFIG_BLK_SSFDC=y
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=m
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+CONFIG_CASSINI=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NE2000 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_8129 is not set
+CONFIG_8139_OLD_RX_RESET=y
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+CONFIG_PRISM54=m
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 0f15216..defc13c 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -11,6 +11,8 @@
config NR_ONCHIP_DMA_CHANNELS
depends on SH_DMA
int "Number of on-chip DMAC channels"
+ default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
+ default "12" if CPU_SUBTYPE_SH7780
default "4"
help
This allows you to specify the number of channels that the on-chip
@@ -52,4 +54,3 @@
are dual-address capable.
endmenu
-
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0f866f8..9cb0709 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -3,7 +3,7 @@
*
* G2 bus DMA support
*
- * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2003 - 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -13,7 +13,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-
+#include <asm/cacheflush.h>
#include <asm/mach/sysasic.h>
#include <asm/mach/dma.h>
#include <asm/dma.h>
@@ -47,17 +47,31 @@
static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa05f7800;
+#define g2_bytes_remaining(i) \
+ ((g2_dma->channel[i].size - \
+ g2_dma->status[i].size) & 0x0fffffff)
+
static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- /* FIXME: Do some meaningful completion work here.. */
- return IRQ_HANDLED;
-}
+ int i;
-static struct irqaction g2_dma_irq = {
- .name = "g2 DMA handler",
- .handler = g2_dma_interrupt,
- .flags = IRQF_DISABLED,
-};
+ for (i = 0; i < G2_NR_DMA_CHANNELS; i++) {
+ if (g2_dma->status[i].status & 0x20000000) {
+ unsigned int bytes = g2_bytes_remaining(i);
+
+ if (likely(bytes == 0)) {
+ struct dma_info *info = dev_id;
+ struct dma_channel *chan = info->channels + i;
+
+ wake_up(&chan->wait_queue);
+
+ return IRQ_HANDLED;
+ }
+ }
+ }
+
+ return IRQ_NONE;
+}
static int g2_enable_dma(struct dma_channel *chan)
{
@@ -135,8 +149,14 @@
return 0;
}
+static int g2_get_residue(struct dma_channel *chan)
+{
+ return g2_bytes_remaining(chan->chan);
+}
+
static struct dma_ops g2_dma_ops = {
.xfer = g2_xfer_dma,
+ .get_residue = g2_get_residue,
};
static struct dma_info g2_dma_info = {
@@ -148,13 +168,22 @@
static int __init g2_dma_init(void)
{
- setup_irq(HW_EVENT_G2_DMA, &g2_dma_irq);
+ int ret;
+
+ ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+ "g2 DMA handler", &g2_dma_info);
+ if (unlikely(ret))
+ return -EINVAL;
/* Magic */
g2_dma->wait_state = 27;
g2_dma->magic = 0x4659404f;
- return register_dmac(&g2_dma_info);
+ ret = register_dmac(&g2_dma_info);
+ if (unlikely(ret != 0))
+ free_irq(HW_EVENT_G2_DMA, 0);
+
+ return ret;
}
static void __exit g2_dma_exit(void)
@@ -169,4 +198,3 @@
MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
MODULE_DESCRIPTION("G2 bus DMA driver");
MODULE_LICENSE("GPL");
-
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 30a580a..3b0b0f6 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -18,8 +18,8 @@
#include <asm/dma.h>
#include <asm/io.h>
-static unsigned int xfer_complete = 0;
-static int count = 0;
+static unsigned int xfer_complete;
+static int count;
static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -107,4 +107,3 @@
MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
MODULE_DESCRIPTION("NEC PowerVR 2 DMA driver");
MODULE_LICENSE("GPL");
-
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index e028a2d..cbbe8bc 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -11,14 +11,10 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/dreamcast/dma.h>
-#include <asm/signal.h>
-#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/io.h>
#include "dma-sh.h"
@@ -84,18 +80,23 @@
static int sh_dmac_request_dma(struct dma_channel *chan)
{
- char name[32];
+ if (unlikely(!chan->flags & DMA_TEI_CAPABLE))
+ return 0;
- snprintf(name, sizeof(name), "DMAC Transfer End (Channel %d)",
+ chan->name = kzalloc(32, GFP_KERNEL);
+ if (unlikely(chan->name == NULL))
+ return -ENOMEM;
+ snprintf(chan->name, 32, "DMAC Transfer End (Channel %d)",
chan->chan);
return request_irq(get_dmte_irq(chan->chan), dma_tei,
- IRQF_DISABLED, name, chan);
+ IRQF_DISABLED, chan->name, chan);
}
static void sh_dmac_free_dma(struct dma_channel *chan)
{
free_irq(get_dmte_irq(chan->chan), chan);
+ kfree(chan->name);
}
static void
@@ -259,7 +260,7 @@
#ifdef CONFIG_CPU_SH4
make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
- if (i < 0)
+ if (unlikely(i < 0))
return i;
#endif
@@ -274,7 +275,7 @@
* been set.
*/
i = dmaor_reset();
- if (i < 0)
+ if (unlikely(i != 0))
return i;
return register_dmac(info);
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 365bc16..9e00cb8 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -6,7 +6,8 @@
obj-$(CONFIG_PCI_AUTO) += pci-auto.o
obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += pci-st40.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
dma-dreamcast.o
@@ -14,3 +15,6 @@
obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o
obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o
obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o
+obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o
+obj-$(CONFIG_SH_TITAN) += ops-titan.o
+obj-$(CONFIG_SH_LANDISK) += ops-landisk.o
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index 63b1c6f..c0af5f7 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -4,7 +4,7 @@
* PCI fixups for the Sega Dreamcast
*
* Copyright (C) 2001, 2002 M. R. Brown
- * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2002, 2003, 2006 Paul Mundt
*
* This file originally bore the message (with enclosed-$):
* Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
@@ -45,36 +45,16 @@
printk("PCI: Failed resource fixup\n");
}
}
-
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, gapspci_fixup_resources);
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
- /*
- * We don't have any sub bus to fix up, and this is a rather
- * stupid place to put general device fixups. Don't do it.
- * Use the pcibios_fixups table or suffer the consequences.
+ /*
+ * The interrupt routing semantics here are quite trivial.
+ *
+ * We basically only support one interrupt, so we only bother
+ * updating a device's interrupt line with this single shared
+ * interrupt. Keeps routing quite simple, doesn't it?
*/
+ return GAPSPCI_IRQ;
}
-
-void __init pcibios_fixup_irqs(void)
-{
- struct pci_dev *dev = 0;
-
- for_each_pci_dev(dev) {
- /*
- * The interrupt routing semantics here are quite trivial.
- *
- * We basically only support one interrupt, so we only bother
- * updating a device's interrupt line with this single shared
- * interrupt. Keeps routing quite simple, doesn't it?
- */
- printk(KERN_NOTICE "PCI: Fixing up IRQ routing for device %s\n",
- pci_name(dev));
-
- dev->irq = GAPSPCI_IRQ;
-
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
-}
-
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
new file mode 100644
index 0000000..3e321df
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -0,0 +1,45 @@
+/*
+ * arch/sh/drivers/pci/fixups-r7780rp.c
+ *
+ * Highlander R7780RP-1 PCI fixups
+ *
+ * Copyright (C) 2003 Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+#include <asm/io.h>
+
+int pci_fixup_pcic(void)
+{
+ pci_write_reg(0x000043ff, SH4_PCIINTM);
+ pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+ pci_write_reg(0xfbb00047, SH7780_PCICMD);
+ pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+ pci_write_reg(0x00011912, SH7780_PCISVID);
+ pci_write_reg(0x08000000, SH7780_PCICSCR0);
+ pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+ pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+ pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+ pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+ pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+ pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+ pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+ /* Set IOBR for windows containing area specified in pci.h */
+ pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+ SH7780_PCIIOBR);
+ pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR);
+
+ return 0;
+}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 0c590fc..e72ceb5 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -10,8 +10,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#include "pci-sh7751.h"
-#include <asm/io.h>
+#include "pci-sh4.h"
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
@@ -22,22 +21,23 @@
bcr1 = inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- outl(bcr1, PCI_REG(SH7751_PCIBCR1));
+ pci_write_reg(bcr1, SH4_PCIBCR1);
/* Enable all interrupts, so we known what to fix */
- outl(0x0000c3ff, PCI_REG(SH7751_PCIINTM));
- outl(0x0000380f, PCI_REG(SH7751_PCIAINTM));
+ pci_write_reg(0x0000c3ff, SH4_PCIINTM);
+ pci_write_reg(0x0000380f, SH4_PCIAINTM);
- outl(0xfb900047, PCI_REG(SH7751_PCICONF1));
- outl(0xab000001, PCI_REG(SH7751_PCICONF4));
+ pci_write_reg(0xfb900047, SH7751_PCICONF1);
+ pci_write_reg(0xab000001, SH7751_PCICONF4);
mcr = inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- outl(mcr, PCI_REG(SH7751_PCIMCR));
+ pci_write_reg(mcr, SH4_PCIMCR);
- outl(0x0c000000, PCI_REG(SH7751_PCICONF5));
- outl(0xd0000000, PCI_REG(SH7751_PCICONF6));
- outl(0x0c000000, PCI_REG(SH7751_PCILAR0));
- outl(0x00000000, PCI_REG(SH7751_PCILAR1));
+ pci_write_reg(0x0c000000, SH7751_PCICONF5);
+ pci_write_reg(0xd0000000, SH7751_PCICONF6);
+ pci_write_reg(0x0c000000, SH4_PCILAR0);
+ pci_write_reg(0x00000000, SH4_PCILAR1);
+
return 0;
}
diff --git a/arch/sh/drivers/pci/fixups-sh03.c b/arch/sh/drivers/pci/fixups-sh03.c
index 57ac26c..2e8a18b 100644
--- a/arch/sh/drivers/pci/fixups-sh03.c
+++ b/arch/sh/drivers/pci/fixups-sh03.c
@@ -3,11 +3,7 @@
#include <linux/types.h>
#include <linux/pci.h>
-/*
- * IRQ functions
- */
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin, struct pci_dev *dev)
+int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
@@ -17,8 +13,9 @@
case 8: return 5; /* eth1 */
case 6: return 2; /* PCI bridge */
default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return 2;
+ printk(KERN_ERR "PCI: Bad IRQ mapping request "
+ "for slot %d\n", slot);
+ return 2;
}
} else {
switch (pin) {
@@ -32,30 +29,3 @@
}
return irq;
}
-
-static u8 __init sh03_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
- /* no swizzling */
- return PCI_SLOT(dev->devfn);
-}
-
-static int sh03_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
- irq = pcibios_map_platform_irq(slot, pin, dev);
- if( irq < 0 ) {
- pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
- return irq;
- }
-
- pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
- return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
- pci_fixup_irqs(sh03_no_swizzle, sh03_pci_lookup_irq);
-}
diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c
index ae82c6c..5da501b 100644
--- a/arch/sh/drivers/pci/ops-bigsur.c
+++ b/arch/sh/drivers/pci/ops-bigsur.c
@@ -10,15 +10,12 @@
*
* PCI initialization for the Hitachi Big Sur Evaluation Board
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
-#include <linux/delay.h>
#include <linux/pci.h>
-
#include <asm/io.h>
-#include "pci-sh7751.h"
+#include "pci-sh4.h"
#include <asm/bigsur/bigsur.h>
#define BIGSUR_PCI_IO 0x4000
@@ -41,11 +38,11 @@
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+ { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ 0, }
};
-static struct sh7751_pci_address_map sh7751_pci_map = {
+static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS3_BASE_ADDR,
.size = BIGSUR_LSR0_SIZE,
@@ -58,7 +55,7 @@
};
/*
- * Initialize the Big Sur PCI interface
+ * Initialize the Big Sur PCI interface
* Setup hardware to be Central Funtion
* Copy the BSR regs to the PCI interface
* Setup PCI windows into local RAM
@@ -68,15 +65,15 @@
return sh7751_pcic_init(&sh7751_pci_map);
}
-int pcibios_map_platform_irq(u8 slot, u8 pin)
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
- /*
+ /*
* The Big Sur can be used in a CPCI chassis, but the SH7751 PCI
* interface is on the wrong end of the board so that it can also
* support a V320 CPI interface chip... Therefor the IRQ mapping is
* somewhat use dependent... I'l assume a linear map for now, i.e.
* INTA=slot0,pin0... INTD=slot3,pin0...
- */
+ */
int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE;
PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n",
@@ -84,4 +81,3 @@
return irq;
}
-
diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c
new file mode 100644
index 0000000..ada301c
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-landisk.c
@@ -0,0 +1,68 @@
+/*
+ * arch/sh/drivers/pci/ops-landisk.c
+ *
+ * PCI initialization for the I-O DATA Device, Inc. LANDISK board
+ *
+ * Copyright (C) 2006 kogiidena
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static struct resource sh7751_io_resource = {
+ .name = "SH7751 IO",
+ .start = 0x4000,
+ .end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7751 mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+ {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff},
+ {NULL, NULL, NULL, 0, 0},
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+ .window0 = {
+ .base = SH7751_CS3_BASE_ADDR,
+ .size = (64 << 20), /* 64MB */
+ },
+
+ .flags = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+ return sh7751_pcic_init(&sh7751_pci_map);
+}
+
+int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ /*
+ * slot0: pin1-4 = irq5,6,7,8
+ * slot1: pin1-4 = irq6,7,8,5
+ * slot2: pin1-4 = irq7,8,5,6
+ * slot3: pin1-4 = irq8,5,6,7
+ */
+ int irq = ((slot + pin - 1) & 0x3) + 5;
+
+ if ((slot | (pin - 1)) > 0x3) {
+ printk("PCI: Bad IRQ mapping request for slot %d pin %c\n",
+ slot, pin - 1 + 'A');
+ return -1;
+ }
+ return irq;
+}
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
new file mode 100644
index 0000000..554d5ed
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -0,0 +1,75 @@
+/*
+ * Author: Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 0: return IRQ_PCISLOT1; /* PCI Interrupt #1 */
+ case 1: return IRQ_PCISLOT2; /* PCI Interrupt #2 */
+ case 2: return IRQ_PCISLOT3; /* PCI Interrupt #3 */
+ case 3: return IRQ_PCISLOT4; /* PCI Interrupt E4 */
+ default:
+ printk(KERN_ERR "PCI: Bad IRQ mapping "
+ "request for slot %d, func %d\n", slot, pin-1);
+ return -1;
+ }
+}
+
+static struct resource sh7780_io_resource = {
+ .name = "SH7780_IO",
+ .start = 0x2000,
+ .end = 0x2000 + SH7780_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7780_mem_resource = {
+ .name = "SH7780_mem",
+ .start = SH7780_PCI_MEMORY_BASE,
+ .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+extern struct pci_ops sh7780_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+ { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
+ { NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7780_pci_map = {
+ .window0 = {
+ .base = SH7780_CS2_BASE_ADDR,
+ .size = 0x04000000,
+ },
+
+ .window1 = {
+ .base = SH7780_CS3_BASE_ADDR,
+ .size = 0x04000000,
+ },
+
+ .flags = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+ return sh7780_pcic_init(&sh7780_pci_map);
+}
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
index 83171d1..88f44e2 100644
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ b/arch/sh/drivers/pci/ops-rts7751r2d.c
@@ -17,12 +17,11 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/module.h>
-
-#include <asm/io.h>
-#include "pci-sh7751.h"
#include <asm/rts7751r2d/rts7751r2d.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
switch (slot) {
case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */
@@ -52,12 +51,12 @@
extern struct pci_ops sh7751_pci_ops;
struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+ { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ NULL, NULL, NULL, 0, 0 },
};
EXPORT_SYMBOL(board_pci_channels);
-static struct sh7751_pci_address_map sh7751_pci_map = {
+static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS3_BASE_ADDR,
.size = 0x04000000,
@@ -68,7 +67,7 @@
.size = 0x00000000, /* Unused */
},
- .flags = SH7751_PCIC_NO_RESET,
+ .flags = SH4_PCIC_NO_RESET,
};
int __init pcibios_init_platform(void)
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
new file mode 100644
index 0000000..2d437100
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -0,0 +1,164 @@
+/*
+ * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
+ *
+ * Copyright (C) 2002 - 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
+
+/*
+ * Direct access to PCI hardware...
+ */
+#define CONFIG_CMD(bus, devfn, where) \
+ P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3))
+
+static DEFINE_SPINLOCK(sh4_pci_lock);
+
+/*
+ * Functions for accessing PCI configuration space with type 1 accesses
+ */
+static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ unsigned long flags;
+ u32 data;
+
+ /*
+ * PCIPDR may only be accessed as 32 bit words,
+ * so we must do byte alignment by hand
+ */
+ spin_lock_irqsave(&sh4_pci_lock, flags);
+ pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+ data = pci_read_reg(SH4_PCIPDR);
+ spin_unlock_irqrestore(&sh4_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ break;
+ case 2:
+ *val = (data >> ((where & 2) << 3)) & 0xffff;
+ break;
+ case 4:
+ *val = data;
+ break;
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * Since SH4 only does 32bit access we'll have to do a read,
+ * mask,write operation.
+ * We'll allow an odd byte offset, though it should be illegal.
+ */
+static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ unsigned long flags;
+ int shift;
+ u32 data;
+
+ spin_lock_irqsave(&sh4_pci_lock, flags);
+ pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+ data = pci_read_reg(SH4_PCIPDR);
+ spin_unlock_irqrestore(&sh4_pci_lock, flags);
+
+ switch (size) {
+ case 1:
+ shift = (where & 3) << 3;
+ data &= ~(0xff << shift);
+ data |= ((val & 0xff) << shift);
+ break;
+ case 2:
+ shift = (where & 2) << 3;
+ data &= ~(0xffff << shift);
+ data |= ((val & 0xffff) << shift);
+ break;
+ case 4:
+ data = val;
+ break;
+ default:
+ return PCIBIOS_FUNC_NOT_SUPPORTED;
+ }
+
+ pci_write_reg(data, SH4_PCIPDR);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops sh4_pci_ops = {
+ .read = sh4_pci_read,
+ .write = sh4_pci_write,
+};
+
+/*
+ * Not really related to pci_ops, but it's common and not worth shoving
+ * somewhere else for now..
+ */
+static unsigned int pci_probe = PCI_PROBE_CONF1;
+
+int __init sh4_pci_check_direct(void)
+{
+ /*
+ * Check if configuration works.
+ */
+ if (pci_probe & PCI_PROBE_CONF1) {
+ unsigned int tmp = pci_read_reg(SH4_PCIPAR);
+
+ pci_write_reg(P1SEG, SH4_PCIPAR);
+
+ if (pci_read_reg(SH4_PCIPAR) == P1SEG) {
+ pci_write_reg(tmp, SH4_PCIPAR);
+ printk(KERN_INFO "PCI: Using configuration type 1\n");
+ request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
+
+ return 0;
+ }
+
+ pci_write_reg(tmp, SH4_PCIPAR);
+ }
+
+ pr_debug("PCI: pci_check_direct failed\n");
+ return -EINVAL;
+}
+
+/* Handle generic fixups */
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * PCI IDE controllers use non-standard I/O port decoding, respect it.
+ */
+ if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
+ for(i = 0; i < 4; i++) {
+ struct resource *r = &d->resource[i];
+
+ if ((r->start & ~0x80) == 0x374) {
+ r->start |= 2;
+ r->end = r->start;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+char * __init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+ }
+
+ return str;
+}
diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c
index 3cbd14d..53dd893 100644
--- a/arch/sh/drivers/pci/ops-snapgear.c
+++ b/arch/sh/drivers/pci/ops-snapgear.c
@@ -2,7 +2,7 @@
* arch/sh/drivers/pci/ops-snapgear.c
*
* Author: David McCullough <davidm@snapgear.com>
- *
+ *
* Ported to new API by Paul Mundt <lethal@linux-sh.org>
*
* Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
@@ -12,15 +12,11 @@
*
* PCI initialization for the SnapGear boards
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
-#include <linux/delay.h>
#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "pci-sh7751.h"
+#include "pci-sh4.h"
#define SNAPGEAR_PCI_IO 0x4000
#define SNAPGEAR_PCI_MEM 0xfd000000
@@ -43,14 +39,12 @@
.flags = IORESOURCE_MEM,
};
-extern struct pci_ops sh7751_pci_ops;
-
struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+ { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
{ 0, }
};
-static struct sh7751_pci_address_map sh7751_pci_map = {
+static struct sh4_pci_address_map sh7751_pci_map = {
.window0 = {
.base = SH7751_CS2_BASE_ADDR,
.size = SNAPGEAR_LSR0_SIZE,
@@ -61,11 +55,11 @@
.size = SNAPGEAR_LSR1_SIZE,
},
- .flags = SH7751_PCIC_NO_RESET,
+ .flags = SH4_PCIC_NO_RESET,
};
/*
- * Initialize the SnapGear PCI interface
+ * Initialize the SnapGear PCI interface
* Setup hardware to be Central Funtion
* Copy the BSR regs to the PCI interface
* Setup PCI windows into local RAM
@@ -75,7 +69,7 @@
return sh7751_pcic_init(&sh7751_pci_map);
}
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
int irq = -1;
@@ -98,4 +92,3 @@
{
/* Nothing to fixup .. */
}
-
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c
new file mode 100644
index 0000000..c6097bc
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-titan.c
@@ -0,0 +1,83 @@
+/*
+ * arch/sh/drivers/pci/ops-titan.c
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Modified from ops-snapgear.c written by David McCullough
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the Titan boards
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/titan.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ int irq = -1;
+
+ switch (slot) {
+ case 0: irq = TITAN_IRQ_WAN; break; /* eth0 (WAN) */
+ case 1: irq = TITAN_IRQ_LAN; break; /* eth1 (LAN) */
+ case 2: irq = TITAN_IRQ_MPCIA; break; /* mPCI A */
+ case 3: irq = TITAN_IRQ_MPCIB; break; /* mPCI B */
+ case 4: irq = TITAN_IRQ_USB; break; /* USB */
+ default:
+ printk(KERN_INFO "PCI: Bad IRQ mapping "
+ "request for slot %d\n", slot);
+ return -1;
+ }
+
+ printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
+ slot, pin - 1 + 'A', irq);
+
+ return irq;
+}
+
+static struct resource sh7751_io_resource = {
+ .name = "SH7751_IO",
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7751_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+ { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+ { NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+ .window0 = {
+ .base = SH7751_CS2_BASE_ADDR,
+ .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */
+ },
+
+ .window1 = {
+ .base = SH7751_CS2_BASE_ADDR,
+ .size = SH7751_MEM_REGION_SIZE*2,
+ },
+
+ .flags = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+ return sh7751_pcic_init(&sh7751_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index 4cef4d1..ecf1634 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -45,11 +45,11 @@
#include <linux/types.h>
#include <linux/pci.h>
-#undef DEBUG
-#ifdef DEBUG
+#define DEBUG
+#ifdef DEBUG
#define DBG(x...) printk(x)
#else
-#define DBG(x...)
+#define DBG(x...)
#endif
/*
@@ -102,7 +102,7 @@
static u32 pciauto_lower_memspc;
static u32 pciauto_upper_memspc;
-static void __init
+static void __init
pciauto_setup_bars(struct pci_channel *hose,
int top_bus,
int current_bus,
@@ -116,7 +116,6 @@
int found_mem64 = 0;
for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
u32 bar_addr;
/* Read the old BAR value */
@@ -125,7 +124,6 @@
pci_devfn,
bar,
&bar_addr);
-#endif
/* Tickle the BAR and get the response */
early_write_config_dword(hose, top_bus,
@@ -140,8 +138,7 @@
bar,
&bar_response);
-#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
- /*
+ /*
* Write the old BAR value back out, only update the BAR
* if we implicitly want resources to be updated, which
* is done by the generic code further down. -- PFM.
@@ -151,7 +148,6 @@
pci_devfn,
bar,
bar_addr);
-#endif
/* If BAR is not implemented go to the next BAR */
if (!bar_response)
@@ -177,7 +173,7 @@
PCI_BASE_ADDRESS_MEM_TYPE_64)
found_mem64 = 1;
- addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
+ addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
upper_limit = &pciauto_upper_memspc;
lower_limit = &pciauto_lower_memspc;
DBG(" Mem");
@@ -193,22 +189,22 @@
if ((bar_value + bar_size) > *upper_limit) {
if (bar_response & PCI_BASE_ADDRESS_SPACE) {
if (io_resource_inuse->child) {
- io_resource_inuse =
+ io_resource_inuse =
io_resource_inuse->child;
- pciauto_lower_iospc =
+ pciauto_lower_iospc =
io_resource_inuse->start;
- pciauto_upper_iospc =
+ pciauto_upper_iospc =
io_resource_inuse->end + 1;
goto retry;
}
} else {
if (mem_resource_inuse->child) {
- mem_resource_inuse =
+ mem_resource_inuse =
mem_resource_inuse->child;
- pciauto_lower_memspc =
+ pciauto_lower_memspc =
mem_resource_inuse->start;
- pciauto_upper_memspc =
+ pciauto_upper_memspc =
mem_resource_inuse->end + 1;
goto retry;
}
@@ -230,7 +226,7 @@
* If we are a 64-bit decoder then increment to the
* upper 32 bits of the bar and force it to locate
* in the lower 4GB of memory.
- */
+ */
if (found_mem64) {
bar += 4;
early_write_config_dword(hose, top_bus,
@@ -362,7 +358,6 @@
{
u32 temp;
-#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D)
/*
* [jsun] we always bump up baselines a little, so that if there
* nothing behind P2P bridge, we don't wind up overlapping IO/MEM
@@ -370,7 +365,6 @@
*/
pciauto_lower_memspc += 1;
pciauto_lower_iospc += 1;
-#endif
/*
* Configure subordinate bus number. The PCI subsystem
@@ -396,11 +390,6 @@
* configured by this routine to happily live behind a
* P2P bridge in a system.
*/
-#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D)
- pciauto_lower_memspc += 0x00400000;
- pciauto_lower_iospc += 0x00004000;
-#endif
-
/* Align memory and I/O to 4KB and 4 byte boundaries. */
pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
& ~(0x1000 - 1);
@@ -433,12 +422,12 @@
int devfn_stop = 0xff;
sub_bus = current_bus;
-
+
if (hose->first_devfn)
devfn_start = hose->first_devfn;
if (hose->last_devfn)
devfn_stop = hose->last_devfn;
-
+
for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
if (PCI_FUNC(pci_devfn) && !found_multi)
@@ -471,9 +460,6 @@
if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
DBG(" Bridge: primary=%.2x, secondary=%.2x\n",
current_bus, sub_bus + 1);
-#if defined(CONFIG_SH_HS7751RVOIP) || defined(CONFIG_SH_RTS7751R2D)
- pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_1);
-#endif
pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
pci_devfn, sub_bus);
DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
@@ -490,10 +476,10 @@
DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
/* Place CardBus Socket/ExCA registers */
pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
-
+
pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
current_bus, pci_devfn, sub_bus);
-
+
DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
sub_bus + 1,
pciauto_lower_iospc, pciauto_lower_memspc);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
new file mode 100644
index 0000000..5a61d60
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -0,0 +1,180 @@
+#ifndef __PCI_SH4_H
+#define __PCI_SH4_H
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#include "pci-sh7780.h"
+#else
+#include "pci-sh7751.h"
+#endif
+
+#include <asm/io.h>
+
+/* startup values */
+#define PCI_PROBE_BIOS 1
+#define PCI_PROBE_CONF1 2
+#define PCI_PROBE_CONF2 4
+#define PCI_NO_SORT 0x100
+#define PCI_BIOS_SORT 0x200
+#define PCI_NO_CHECKS 0x400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+#define SH4_PCICR 0x100 /* PCI Control Register */
+ #define SH4_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
+ #define SH4_PCICR_FTO 0x00000400 /* TRDY/IRDY Enable */
+ #define SH4_PCICR_TRSB 0x00000200 /* Target Read Single */
+ #define SH4_PCICR_BSWP 0x00000100 /* Target Byte Swap */
+ #define SH4_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
+ #define SH4_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
+ #define SH4_PCICR_MD 0x00000030 /* MD9 and MD10 status */
+ #define SH4_PCICR_SERR 0x00000008 /* SERR output assert */
+ #define SH4_PCICR_INTA 0x00000004 /* INTA output assert */
+ #define SH4_PCICR_PRST 0x00000002 /* PCI Reset Assert */
+ #define SH4_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
+#define SH4_PCILSR0 0x104 /* PCI Local Space Register0 */
+#define SH4_PCILSR1 0x108 /* PCI Local Space Register1 */
+#define SH4_PCILAR0 0x10C /* PCI Local Addr Register1 */
+#define SH4_PCILAR1 0x110 /* PCI Local Addr Register1 */
+#define SH4_PCIINT 0x114 /* PCI Interrupt Register */
+ #define SH4_PCIINT_MLCK 0x00008000 /* Master Lock Error */
+ #define SH4_PCIINT_TABT 0x00004000 /* Target Abort Error */
+ #define SH4_PCIINT_TRET 0x00000200 /* Target Retry Error */
+ #define SH4_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
+ #define SH4_PCIINT_PRTY 0x00000080 /* Address Parity Error */
+ #define SH4_PCIINT_SERR 0x00000040 /* SERR Detection Error */
+ #define SH4_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
+ #define SH4_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Err Det. */
+ #define SH4_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
+ #define SH4_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
+ #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
+ #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
+#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
+#define SH4_PCIALR 0x11C /* Error Address Register */
+#define SH4_PCICLR 0x120 /* Error Command/Data */
+ #define SH4_PCICLR_MPIO 0x80000000
+ #define SH4_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
+ #define SH4_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
+ #define SH4_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
+ #define SH4_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
+ #define SH4_PCICLR_TGT 0x04000000 /* Target Transfer Error */
+ #define SH4_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
+#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
+ #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
+ #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
+ #define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
+ #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
+ #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
+ #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
+ #define SH4_PCIAINT_WDPE 0x00000001 /* Write Data Parity Error */
+#define SH4_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
+#define SH4_PCIBMLR 0x138 /* Error Bus Master Register */
+ #define SH4_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
+ #define SH4_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
+ #define SH4_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
+ #define SH4_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
+ #define SH4_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
+#define SH4_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
+ #define SH4_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
+#define SH4_PCIDPA0 0x180 /* DMA0 Transfer Addr. */
+#define SH4_PCIDLA0 0x184 /* DMA0 Local Addr. */
+#define SH4_PCIDTC0 0x188 /* DMA0 Transfer Cnt. */
+#define SH4_PCIDCR0 0x18C /* DMA0 Control Register */
+ #define SH4_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
+ #define SH4_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
+ #define SH4_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
+ #define SH4_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
+ #define SH4_PCIDCR_LHLD 0x00000020 /* Local Address Control */
+ #define SH4_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
+ #define SH4_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
+ #define SH4_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
+ #define SH4_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
+ #define SH4_PCIDCR_STRT 0x00000001 /* DMA Start */
+#define SH4_PCIDPA1 0x190 /* DMA1 Transfer Addr. */
+#define SH4_PCIDLA1 0x194 /* DMA1 Local Addr. */
+#define SH4_PCIDTC1 0x198 /* DMA1 Transfer Cnt. */
+#define SH4_PCIDCR1 0x19C /* DMA1 Control Register */
+#define SH4_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. */
+#define SH4_PCIDLA2 0x1A4 /* DMA2 Local Addr. */
+#define SH4_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. */
+#define SH4_PCIDCR2 0x1AC /* DMA2 Control Register */
+#define SH4_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. */
+#define SH4_PCIDLA3 0x1B4 /* DMA3 Local Addr. */
+#define SH4_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. */
+#define SH4_PCIDCR3 0x1BC /* DMA3 Control Register */
+#define SH4_PCIPAR 0x1C0 /* PIO Address Register */
+ #define SH4_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
+ #define SH4_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
+ #define SH4_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
+ #define SH4_PCIPAR_REGAD 0x000000FC /* Register Address Number */
+#define SH4_PCIMBR 0x1C4 /* Memory Base Address */
+ #define SH4_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
+ #define SH4_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
+#define SH4_PCIIOBR 0x1C8 /* I/O Base Address Register */
+ #define SH4_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
+ #define SH4_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
+#define SH4_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
+ #define SH4_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
+ #define SH4_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
+#define SH4_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
+#define SH4_PCICLKR 0x1D4 /* Clock Ctrl. Register */
+ #define SH4_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
+ #define SH4_PCICLKR_BCSTP 0x00000001 /* BCLK Clock Stop */
+/* For definitions of BCR, MCR see ... */
+#define SH4_PCIBCR1 0x1E0 /* Memory BCR1 Register */
+ #define SH4_PCIMBR0 SH4_PCIBCR1
+#define SH4_PCIBCR2 0x1E4 /* Memory BCR2 Register */
+ #define SH4_PCIMBMR0 SH4_PCIBCR2
+#define SH4_PCIWCR1 0x1E8 /* Wait Control 1 Register */
+#define SH4_PCIWCR2 0x1EC /* Wait Control 2 Register */
+#define SH4_PCIWCR3 0x1F0 /* Wait Control 3 Register */
+ #define SH4_PCIMBR2 SH4_PCIWCR3
+#define SH4_PCIMCR 0x1F4 /* Memory Control Register */
+#define SH4_PCIBCR3 0x1f8 /* Memory BCR3 Register */
+#define SH4_PCIPCTR 0x200 /* Port Control Register */
+ #define SH4_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
+ #define SH4_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
+ #define SH4_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
+ #define SH4_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
+ #define SH4_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
+ #define SH4_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
+ #define SH4_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
+ #define SH4_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
+ #define SH4_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
+#define SH4_PCIPDTR 0x204 /* Port Data Register */
+ #define SH4_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
+ #define SH4_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
+ #define SH4_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
+ #define SH4_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
+ #define SH4_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
+ #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
+#define SH4_PCIPDR 0x220 /* Port IO Data Register */
+
+/* Flags */
+#define SH4_PCIC_NO_RESET 0x0001
+
+/* arch/sh/kernel/drivers/pci/ops-sh4.c */
+extern struct pci_ops sh4_pci_ops;
+int sh4_pci_check_direct(void);
+int pci_fixup_pcic(void);
+
+struct sh4_pci_address_space {
+ unsigned long base;
+ unsigned long size;
+};
+
+struct sh4_pci_address_map {
+ struct sh4_pci_address_space window0;
+ struct sh4_pci_address_space window1;
+ unsigned long flags;
+};
+
+static inline void pci_write_reg(unsigned long val, unsigned long reg)
+{
+ outl(val, PCI_REG(reg));
+}
+
+static inline unsigned long pci_read_reg(unsigned long reg)
+{
+ return inl(PCI_REG(reg));
+}
+#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 682f3da..dbe8378 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -15,180 +15,14 @@
#undef DEBUG
-#include <linux/types.h>
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
+#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/irq.h>
#include <linux/delay.h>
-
-#include <asm/machvec.h>
+#include "pci-sh4.h"
+#include <asm/addrspace.h>
#include <asm/io.h>
-#include "pci-sh7751.h"
-
-static unsigned int pci_probe = PCI_PROBE_CONF1;
-extern int pci_fixup_pcic(void);
-
-void pcibios_fixup_irqs(void) __attribute__ ((weak));
-
-/*
- * Direct access to PCI hardware...
- */
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int sh7751_pci_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned long flags;
- u32 data;
-
- /*
- * PCIPDR may only be accessed as 32 bit words,
- * so we must do byte alignment by hand
- */
- local_irq_save(flags);
- outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR));
- data = inl(PCI_REG(SH7751_PCIPDR));
- local_irq_restore(flags);
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xff;
- break;
- case 2:
- *val = (data >> ((where & 2) << 3)) & 0xffff;
- break;
- case 4:
- *val = data;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * Since SH7751 only does 32bit access we'll have to do a read,
- * mask,write operation.
- * We'll allow an odd byte offset, though it should be illegal.
- */
-static int sh7751_pci_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- unsigned long flags;
- int shift;
- u32 data;
-
- local_irq_save(flags);
- outl(CONFIG_CMD(bus,devfn,where), PCI_REG(SH7751_PCIPAR));
- data = inl(PCI_REG(SH7751_PCIPDR));
- local_irq_restore(flags);
-
- switch (size) {
- case 1:
- shift = (where & 3) << 3;
- data &= ~(0xff << shift);
- data |= ((val & 0xff) << shift);
- break;
- case 2:
- shift = (where & 2) << 3;
- data &= ~(0xffff << shift);
- data |= ((val & 0xffff) << shift);
- break;
- case 4:
- data = val;
- break;
- default:
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- outl(data, PCI_REG(SH7751_PCIPDR));
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-struct pci_ops sh7751_pci_ops = {
- .read = sh7751_pci_read,
- .write = sh7751_pci_write,
-};
-
-static int __init pci_check_direct(void)
-{
- unsigned int tmp, id;
-
- /* check for SH7751/SH7751R hardware */
- id = inl(SH7751_PCIREG_BASE+SH7751_PCICONF0);
- if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
- id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
- pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
- return -ENODEV;
- }
-
- /*
- * Check if configuration works.
- */
- if (pci_probe & PCI_PROBE_CONF1) {
- tmp = inl (PCI_REG(SH7751_PCIPAR));
- outl (0x80000000, PCI_REG(SH7751_PCIPAR));
- if (inl (PCI_REG(SH7751_PCIPAR)) == 0x80000000) {
- outl (tmp, PCI_REG(SH7751_PCIPAR));
- printk(KERN_INFO "PCI: Using configuration type 1\n");
- request_region(PCI_REG(SH7751_PCIPAR), 8, "PCI conf1");
- return 0;
- }
- outl (tmp, PCI_REG(SH7751_PCIPAR));
- }
-
- pr_debug("PCI: pci_check_direct failed\n");
- return -EINVAL;
-}
-
-/***************************************************************************************/
-
-/*
- * Handle bus scanning and fixups ....
- */
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-/*
- * Called after each bus is probed, but before its children
- * are examined.
- */
-
-void __init pcibios_fixup_bus(struct pci_bus *b)
-{
- pci_read_bridge_bases(b);
-}
/*
* Initialization. Try all known PCI access methods. Note that we support
@@ -196,25 +30,29 @@
* to access config space.
*
* Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the machine vectors (sh_mv.mv_pci_init()) if it
- * exitst and via the platform defined function pcibios_init_platform().
- * See pci_bigsur.c for implementation;
- *
- * The BIOS version of the pci functions is not yet implemented but it is left
- * in for completeness. Currently an error will be genereated at compile time.
+ * space mapping) will be called via the platform defined function
+ * pcibios_init_platform().
*/
-
static int __init sh7751_pci_init(void)
{
+ unsigned int id;
int ret;
pr_debug("PCI: Starting intialization.\n");
- if ((ret = pci_check_direct()) != 0)
+
+ /* check for SH7751/SH7751R hardware */
+ id = pci_read_reg(SH7751_PCICONF0);
+ if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+ id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+ pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
+ return -ENODEV;
+ }
+
+ if ((ret = sh4_pci_check_direct()) != 0)
return ret;
return pcibios_init_platform();
}
-
subsys_initcall(sh7751_pci_init);
static int __init __area_sdram_check(unsigned int area)
@@ -223,26 +61,26 @@
word = inl(SH7751_BCR1);
/* check BCR for SDRAM in area */
- if(((word >> area) & 1) == 0) {
+ if (((word >> area) & 1) == 0) {
printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
area, word);
return 0;
}
- outl(word, PCI_REG(SH7751_PCIBCR1));
+ pci_write_reg(word, SH4_PCIBCR1);
word = (u16)inw(SH7751_BCR2);
/* check BCR2 for 32bit SDRAM interface*/
- if(((word >> (area << 1)) & 0x3) != 0x3) {
+ if (((word >> (area << 1)) & 0x3) != 0x3) {
printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
area, word);
return 0;
}
- outl(word, PCI_REG(SH7751_PCIBCR2));
+ pci_write_reg(word, SH4_PCIBCR2);
return 1;
}
-int __init sh7751_pcic_init(struct sh7751_pci_address_map *map)
+int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
{
u32 reg;
u32 word;
@@ -251,39 +89,39 @@
reg = inl(SH7751_BCR1);
reg |= 0x80000;
outl(reg, SH7751_BCR1);
-
+
/* Turn the clocks back on (not done in reset)*/
- outl(0, PCI_REG(SH7751_PCICLKR));
+ pci_write_reg(0, SH4_PCICLKR);
/* Clear Powerdown IRQ's (not done in reset) */
- word = SH7751_PCIPINT_D3 | SH7751_PCIPINT_D0;
- outl(word, PCI_REG(SH7751_PCIPINT));
+ word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
+ pci_write_reg(word, SH4_PCIPINT);
/*
* This code is unused for some boards as it is done in the
* bootloader and doing it here means the MAC addresses loaded
* by the bootloader get lost.
*/
- if (!(map->flags & SH7751_PCIC_NO_RESET)) {
+ if (!(map->flags & SH4_PCIC_NO_RESET)) {
/* toggle PCI reset pin */
- word = SH7751_PCICR_PREFIX | SH7751_PCICR_PRST;
- outl(word,PCI_REG(SH7751_PCICR));
+ word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
+ pci_write_reg(word, SH4_PCICR);
/* Wait for a long time... not 1 sec. but long enough */
mdelay(100);
- word = SH7751_PCICR_PREFIX;
- outl(word,PCI_REG(SH7751_PCICR));
+ word = SH4_PCICR_PREFIX;
+ pci_write_reg(word, SH4_PCICR);
}
-
+
/* set the command/status bits to:
* Wait Cycle Control + Parity Enable + Bus Master +
* Mem space enable
*/
word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
- outl(word, PCI_REG(SH7751_PCICONF1));
+ pci_write_reg(word, SH7751_PCICONF1);
/* define this host as the host bridge */
- word = SH7751_PCI_HOST_BRIDGE << 24;
- outl(word, PCI_REG(SH7751_PCICONF2));
+ word = PCI_BASE_CLASS_BRIDGE << 24;
+ pci_write_reg(word, SH7751_PCICONF2);
/* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
@@ -291,46 +129,49 @@
* Window1 = map->window1.size @ cached area base = SDRAM
*/
word = map->window0.size - 1;
- outl(word, PCI_REG(SH7751_PCILSR0));
+ pci_write_reg(word, SH4_PCILSR0);
word = map->window1.size - 1;
- outl(word, PCI_REG(SH7751_PCILSR1));
+ pci_write_reg(word, SH4_PCILSR1);
/* Set the values on window 0 PCI config registers */
word = P2SEGADDR(map->window0.base);
- outl(word, PCI_REG(SH7751_PCILAR0));
- outl(word, PCI_REG(SH7751_PCICONF5));
+ pci_write_reg(word, SH4_PCILAR0);
+ pci_write_reg(word, SH7751_PCICONF5);
/* Set the values on window 1 PCI config registers */
word = PHYSADDR(map->window1.base);
- outl(word, PCI_REG(SH7751_PCILAR1));
- outl(word, PCI_REG(SH7751_PCICONF6));
+ pci_write_reg(word, SH4_PCILAR1);
+ pci_write_reg(word, SH7751_PCICONF6);
- /* Set the local 16MB PCI memory space window to
+ /* Set the local 16MB PCI memory space window to
* the lowest PCI mapped address
*/
- word = PCIBIOS_MIN_MEM & SH7751_PCIMBR_MASK;
- PCIDBG(2,"PCI: Setting upper bits of Memory window to 0x%x\n", word);
- outl(word , PCI_REG(SH7751_PCIMBR));
+ word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK;
+ pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
+ pci_write_reg(word , SH4_PCIMBR);
/* Map IO space into PCI IO window
* The IO window is 64K-PCIBIOS_MIN_IO in size
- * IO addresses will be translated to the
+ * IO addresses will be translated to the
* PCI IO window base address
*/
- PCIDBG(3,"PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO,
- (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO);
+ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
+ PCIBIOS_MIN_IO, (64 << 10),
+ SH4_PCI_IO_BASE + PCIBIOS_MIN_IO);
- /*
+ /*
* XXX: For now, leave this board-specific. In the event we have other
* boards that need to do similar work, this can be wrapped.
*/
#ifdef CONFIG_SH_BIGSUR
- bigsur_port_map(PCIBIOS_MIN_IO, (64*1024), SH7751_PCI_IO_BASE+PCIBIOS_MIN_IO,0);
+ bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10),
+ SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0);
#endif
- /* Make sure the MSB's of IO window are set to access PCI space correctly */
- word = PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK;
- PCIDBG(2,"PCI: Setting upper bits of IO window to 0x%x\n", word);
- outl(word, PCI_REG(SH7751_PCIIOBR));
-
+ /* Make sure the MSB's of IO window are set to access PCI space
+ * correctly */
+ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;
+ pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
+ pci_write_reg(word, SH4_PCIIOBR);
+
/* Set PCI WCRx, BCRx's, copy from BSC locations */
/* check BCR for SDRAM in specified area */
@@ -349,13 +190,13 @@
/* configure the wait control registers */
word = inl(SH7751_WCR1);
- outl(word, PCI_REG(SH7751_PCIWCR1));
+ pci_write_reg(word, SH4_PCIWCR1);
word = inl(SH7751_WCR2);
- outl(word, PCI_REG(SH7751_PCIWCR2));
+ pci_write_reg(word, SH4_PCIWCR2);
word = inl(SH7751_WCR3);
- outl(word, PCI_REG(SH7751_PCIWCR3));
+ pci_write_reg(word, SH4_PCIWCR3);
word = inl(SH7751_MCR);
- outl(word, PCI_REG(SH7751_PCIMCR));
+ pci_write_reg(word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..
* TODO: add support for the internal error interrupts and
@@ -368,49 +209,8 @@
/* SH7751 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
- word = SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN | SH7751_PCICR_ARBM;
- outl(word,PCI_REG(SH7751_PCICR));
+ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
+ pci_write_reg(word, SH4_PCICR);
return 1;
}
-
-char * __init pcibios_setup(char *str)
-{
- if (!strcmp(str, "off")) {
- pci_probe = 0;
- return NULL;
- }
-
- return str;
-}
-
-/*
- * IRQ functions
- */
-static u8 __init sh7751_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
- /* no swizzling */
- return PCI_SLOT(dev->devfn);
-}
-
-static int sh7751_pci_lookup_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
- irq = pcibios_map_platform_irq(slot,pin);
- if( irq < 0 ) {
- pr_debug("PCI: Error mapping IRQ on device %s\n", pci_name(dev));
- return irq;
- }
-
- pr_debug("Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
- return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
- pci_fixup_irqs(sh7751_no_swizzle, sh7751_pci_lookup_irq);
-}
-
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 1fee5ca..68e3cb5 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -3,7 +3,7 @@
*
* Dustin McIntire (dustin@sensoria.com) (c) 2001
* Paul Mundt (lethal@linux-sh.org) (c) 2003
- *
+ *
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
@@ -12,28 +12,6 @@
#ifndef _PCI_SH7751_H_
#define _PCI_SH7751_H_
-#include <linux/pci.h>
-
-/* set debug level 4=verbose...1=terse */
-//#define DEBUG_PCI 3
-#undef DEBUG_PCI
-
-#ifdef DEBUG_PCI
-#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
-#else
-#define PCIDBG(n, x...)
-#endif
-
-/* startup values */
-#define PCI_PROBE_BIOS 1
-#define PCI_PROBE_CONF1 2
-#define PCI_PROBE_CONF2 4
-#define PCI_NO_SORT 0x100
-#define PCI_BIOS_SORT 0x200
-#define PCI_NO_CHECKS 0x400
-#define PCI_ASSIGN_ROMS 0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-
/* Platform Specific Values */
#define SH7751_VENDOR_ID 0x1054
#define SH7751_DEVICE_ID 0x3505
@@ -128,131 +106,6 @@
#define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */
#define SH7751_PCICONF17_PWST 0x00000003 /* Power State */
/* SH7715 Internal PCI Registers */
-#define SH7751_PCICR 0x100 /* PCI Control Register */
- #define SH7751_PCICR_PREFIX 0xA5000000 /* CR prefix for write */
- #define SH7751_PCICR_TRSB 0x00000200 /* Target Read Single */
- #define SH7751_PCICR_BSWP 0x00000100 /* Target Byte Swap */
- #define SH7751_PCICR_PLUP 0x00000080 /* Enable PCI Pullup */
- #define SH7751_PCICR_ARBM 0x00000040 /* PCI Arbitration Mode */
- #define SH7751_PCICR_MD 0x00000030 /* MD9 and MD10 status */
- #define SH7751_PCICR_SERR 0x00000008 /* SERR output assert */
- #define SH7751_PCICR_INTA 0x00000004 /* INTA output assert */
- #define SH7751_PCICR_PRST 0x00000002 /* PCI Reset Assert */
- #define SH7751_PCICR_CFIN 0x00000001 /* Central Fun. Init Done */
-#define SH7751_PCILSR0 0x104 /* PCI Local Space Register0 */
-#define SH7751_PCILSR1 0x108 /* PCI Local Space Register1 */
-#define SH7751_PCILAR0 0x10C /* PCI Local Address Register1 */
-#define SH7751_PCILAR1 0x110 /* PCI Local Address Register1 */
-#define SH7751_PCIINT 0x114 /* PCI Interrupt Register */
- #define SH7751_PCIINT_MLCK 0x00008000 /* Master Lock Error */
- #define SH7751_PCIINT_TABT 0x00004000 /* Target Abort Error */
- #define SH7751_PCIINT_TRET 0x00000200 /* Target Retry Error */
- #define SH7751_PCIINT_MFDE 0x00000100 /* Master Func. Disable Error */
- #define SH7751_PCIINT_PRTY 0x00000080 /* Address Parity Error */
- #define SH7751_PCIINT_SERR 0x00000040 /* SERR Detection Error */
- #define SH7751_PCIINT_TWDP 0x00000020 /* Tgt. Write Parity Error */
- #define SH7751_PCIINT_TRDP 0x00000010 /* Tgt. Read Parity Error Det. */
- #define SH7751_PCIINT_MTABT 0x00000008 /* Master-Tgt. Abort Error */
- #define SH7751_PCIINT_MMABT 0x00000004 /* Master-Master Abort Error */
- #define SH7751_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
- #define SH7751_PCIINT_MRPD 0x00000002 /* Master Read PERR Detect */
-#define SH7751_PCIINTM 0x118 /* PCI Interrupt Mask Register */
-#define SH7751_PCIALR 0x11C /* Error Address Register */
-#define SH7751_PCICLR 0x120 /* Error Command/Data Register */
- #define SH7751_PCICLR_MPIO 0x80000000 /* Error Command/Data Register */
- #define SH7751_PCICLR_MDMA0 0x40000000 /* DMA0 Transfer Error */
- #define SH7751_PCICLR_MDMA1 0x20000000 /* DMA1 Transfer Error */
- #define SH7751_PCICLR_MDMA2 0x10000000 /* DMA2 Transfer Error */
- #define SH7751_PCICLR_MDMA3 0x08000000 /* DMA3 Transfer Error */
- #define SH7751_PCICLR_TGT 0x04000000 /* Target Transfer Error */
- #define SH7751_PCICLR_CMDL 0x0000000F /* PCI Command at Error */
-#define SH7751_PCIAINT 0x130 /* Arbiter Interrupt Register */
- #define SH7751_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
- #define SH7751_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
- #define SH7751_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
- #define SH7751_PCIAINT_TABT 0x00000008 /* Target Abort */
- #define SH7751_PCIAINT_MABT 0x00000004 /* Master Abort */
- #define SH7751_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */
- #define SH7751_PCIAINT_WDPE 0x00000002 /* Write Data Parity Error */
-#define SH7751_PCIAINTM 0x134 /* Arbiter Int. Mask Register */
-#define SH7751_PCIBMLR 0x138 /* Error Bus Master Register */
- #define SH7751_PCIBMLR_REQ4 0x00000010 /* REQ4 bus master at error */
- #define SH7751_PCIBMLR_REQ3 0x00000008 /* REQ3 bus master at error */
- #define SH7751_PCIBMLR_REQ2 0x00000004 /* REQ2 bus master at error */
- #define SH7751_PCIBMLR_REQ1 0x00000002 /* REQ1 bus master at error */
- #define SH7751_PCIBMLR_REQ0 0x00000001 /* REQ0 bus master at error */
-#define SH7751_PCIDMABT 0x140 /* DMA Transfer Arb. Register */
- #define SH7751_PCIDMABT_RRBN 0x00000001 /* DMA Arbitor Round-Robin */
-#define SH7751_PCIDPA0 0x180 /* DMA0 Transfer Addr. Register */
-#define SH7751_PCIDLA0 0x184 /* DMA0 Local Addr. Register */
-#define SH7751_PCIDTC0 0x188 /* DMA0 Transfer Cnt. Register */
-#define SH7751_PCIDCR0 0x18C /* DMA0 Control Register */
- #define SH7751_PCIDCR_ALGN 0x00000600 /* DMA Alignment Mode */
- #define SH7751_PCIDCR_MAST 0x00000100 /* DMA Termination Type */
- #define SH7751_PCIDCR_INTM 0x00000080 /* DMA Interrupt Done Mask*/
- #define SH7751_PCIDCR_INTS 0x00000040 /* DMA Interrupt Done Status */
- #define SH7751_PCIDCR_LHLD 0x00000020 /* Local Address Control */
- #define SH7751_PCIDCR_PHLD 0x00000010 /* PCI Address Control*/
- #define SH7751_PCIDCR_IOSEL 0x00000008 /* PCI Address Space Type */
- #define SH7751_PCIDCR_DIR 0x00000004 /* DMA Transfer Direction */
- #define SH7751_PCIDCR_STOP 0x00000002 /* Force DMA Stop */
- #define SH7751_PCIDCR_STRT 0x00000001 /* DMA Start */
-#define SH7751_PCIDPA1 0x190 /* DMA1 Transfer Addr. Register */
-#define SH7751_PCIDLA1 0x194 /* DMA1 Local Addr. Register */
-#define SH7751_PCIDTC1 0x198 /* DMA1 Transfer Cnt. Register */
-#define SH7751_PCIDCR1 0x19C /* DMA1 Control Register */
-#define SH7751_PCIDPA2 0x1A0 /* DMA2 Transfer Addr. Register */
-#define SH7751_PCIDLA2 0x1A4 /* DMA2 Local Addr. Register */
-#define SH7751_PCIDTC2 0x1A8 /* DMA2 Transfer Cnt. Register */
-#define SH7751_PCIDCR2 0x1AC /* DMA2 Control Register */
-#define SH7751_PCIDPA3 0x1B0 /* DMA3 Transfer Addr. Register */
-#define SH7751_PCIDLA3 0x1B4 /* DMA3 Local Addr. Register */
-#define SH7751_PCIDTC3 0x1B8 /* DMA3 Transfer Cnt. Register */
-#define SH7751_PCIDCR3 0x1BC /* DMA3 Control Register */
-#define SH7751_PCIPAR 0x1C0 /* PIO Address Register */
- #define SH7751_PCIPAR_CFGEN 0x80000000 /* Configuration Enable */
- #define SH7751_PCIPAR_BUSNO 0x00FF0000 /* Config. Bus Number */
- #define SH7751_PCIPAR_DEVNO 0x0000FF00 /* Config. Device Number */
- #define SH7751_PCIPAR_REGAD 0x000000FC /* Register Address Number */
-#define SH7751_PCIMBR 0x1C4 /* Memory Base Address Register */
- #define SH7751_PCIMBR_MASK 0xFF000000 /* Memory Space Mask */
- #define SH7751_PCIMBR_LOCK 0x00000001 /* Lock Memory Space */
-#define SH7751_PCIIOBR 0x1C8 /* I/O Base Address Register */
- #define SH7751_PCIIOBR_MASK 0xFFFC0000 /* IO Space Mask */
- #define SH7751_PCIIOBR_LOCK 0x00000001 /* Lock IO Space */
-#define SH7751_PCIPINT 0x1CC /* Power Mgmnt Int. Register */
- #define SH7751_PCIPINT_D3 0x00000002 /* D3 Pwr Mgmt. Interrupt */
- #define SH7751_PCIPINT_D0 0x00000001 /* D0 Pwr Mgmt. Interrupt */
-#define SH7751_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */
-#define SH7751_PCICLKR 0x1D4 /* Clock Ctrl. Register */
- #define SH7751_PCICLKR_PCSTP 0x00000002 /* PCI Clock Stop */
- #define SH7751_PCICLKR_BCSTP 0x00000002 /* BCLK Clock Stop */
-/* For definitions of BCR, MCR see ... */
-#define SH7751_PCIBCR1 0x1E0 /* Memory BCR1 Register */
-#define SH7751_PCIBCR2 0x1E4 /* Memory BCR2 Register */
-#define SH7751_PCIWCR1 0x1E8 /* Wait Control 1 Register */
-#define SH7751_PCIWCR2 0x1EC /* Wait Control 2 Register */
-#define SH7751_PCIWCR3 0x1F0 /* Wait Control 3 Register */
-#define SH7751_PCIMCR 0x1F4 /* Memory Control Register */
-#define SH7751_PCIBCR3 0x1f8 /* Memory BCR3 Register */
-#define SH7751_PCIPCTR 0x200 /* Port Control Register */
- #define SH7751_PCIPCTR_P2EN 0x000400000 /* Port 2 Enable */
- #define SH7751_PCIPCTR_P1EN 0x000200000 /* Port 1 Enable */
- #define SH7751_PCIPCTR_P0EN 0x000100000 /* Port 0 Enable */
- #define SH7751_PCIPCTR_P2UP 0x000000020 /* Port2 Pull Up Enable */
- #define SH7751_PCIPCTR_P2IO 0x000000010 /* Port2 Output Enable */
- #define SH7751_PCIPCTR_P1UP 0x000000008 /* Port1 Pull Up Enable */
- #define SH7751_PCIPCTR_P1IO 0x000000004 /* Port1 Output Enable */
- #define SH7751_PCIPCTR_P0UP 0x000000002 /* Port0 Pull Up Enable */
- #define SH7751_PCIPCTR_P0IO 0x000000001 /* Port0 Output Enable */
-#define SH7751_PCIPDTR 0x204 /* Port Data Register */
- #define SH7751_PCIPDTR_PB5 0x000000020 /* Port 5 Enable */
- #define SH7751_PCIPDTR_PB4 0x000000010 /* Port 4 Enable */
- #define SH7751_PCIPDTR_PB3 0x000000008 /* Port 3 Enable */
- #define SH7751_PCIPDTR_PB2 0x000000004 /* Port 2 Enable */
- #define SH7751_PCIPDTR_PB1 0x000000002 /* Port 1 Enable */
- #define SH7751_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
-#define SH7751_PCIPDR 0x220 /* Port IO Data Register */
/* Memory Control Registers */
#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */
@@ -274,30 +127,9 @@
#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-/* General PCI values */
-#define SH7751_PCI_HOST_BRIDGE 0x6
-
-/* Flags */
-#define SH7751_PCIC_NO_RESET 0x0001
-
-/* External functions defined per platform i.e. Big Sur, SE... (these could be routed
- * through the machine vectors... */
-extern int pcibios_init_platform(void);
-extern int pcibios_map_platform_irq(u8 slot, u8 pin);
-
-struct sh7751_pci_address_space {
- unsigned long base;
- unsigned long size;
-};
-
-struct sh7751_pci_address_map {
- struct sh7751_pci_address_space window0;
- struct sh7751_pci_address_space window1;
- unsigned long flags;
-};
+struct sh4_pci_address_map;
/* arch/sh/drivers/pci/pci-sh7751.c */
-extern int sh7751_pcic_init(struct sh7751_pci_address_map *map);
+int sh7751_pcic_init(struct sh4_pci_address_map *map);
#endif /* _PCI_SH7751_H_ */
-
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
new file mode 100644
index 0000000..bd3064a
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -0,0 +1,139 @@
+/*
+ * Low-Level PCI Support for the SH7780
+ *
+ * Dustin McIntire (dustin@sensoria.com)
+ * Derived from arch/i386/kernel/pci-*.c which bore the message:
+ * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ *
+ * Ported to the new API by Paul Mundt <lethal@linux-sh.org>
+ * With cleanup by Paul van Gool <pvangool@mimotech.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include "pci-sh4.h"
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space.
+ *
+ * Note that the platform specific initialization (BSC registers, and memory
+ * space mapping) will be called via the platform defined function
+ * pcibios_init_platform().
+ */
+static int __init sh7780_pci_init(void)
+{
+ unsigned int id;
+ int ret;
+
+ pr_debug("PCI: Starting intialization.\n");
+
+ outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
+
+ /* check for SH7780/SH7780R hardware */
+ id = pci_read_reg(SH7780_PCIVID);
+ if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
+ (id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
+ printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
+ return -ENODEV;
+ }
+
+ /* Setup the INTC */
+ ctrl_outl(0x00200000, INTC_ICR0); /* INTC SH-4 Mode */
+ ctrl_outl(0x00078000, INTC_INT2MSKCR); /* enable PCIINTA - PCIINTD */
+ ctrl_outl(0x40000000, INTC_INTMSK1); /* disable IRL4-7 Interrupt */
+ ctrl_outl(0x0000fffe, INTC_INTMSK2); /* disable IRL4-7 Interrupt */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1); /* enable IRL0-3 Interrupt */
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); /* enable IRL0-3 Interrupt */
+
+ if ((ret = sh4_pci_check_direct()) != 0)
+ return ret;
+
+ return pcibios_init_platform();
+}
+core_initcall(sh7780_pci_init);
+
+int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
+{
+ u32 word;
+
+ /*
+ * This code is unused for some boards as it is done in the
+ * bootloader and doing it here means the MAC addresses loaded
+ * by the bootloader get lost.
+ */
+ if (!(map->flags & SH4_PCIC_NO_RESET)) {
+ /* toggle PCI reset pin */
+ word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
+ pci_write_reg(word, SH4_PCICR);
+ /* Wait for a long time... not 1 sec. but long enough */
+ mdelay(100);
+ word = SH4_PCICR_PREFIX;
+ pci_write_reg(word, SH4_PCICR);
+ }
+
+ /* set the command/status bits to:
+ * Wait Cycle Control + Parity Enable + Bus Master +
+ * Mem space enable
+ */
+ pci_write_reg(0x00000046, SH7780_PCICMD);
+
+ /* define this host as the host bridge */
+ word = PCI_BASE_CLASS_BRIDGE << 24;
+ pci_write_reg(word, SH7780_PCIRID);
+
+ /* Set IO and Mem windows to local address
+ * Make PCI and local address the same for easy 1 to 1 mapping
+ * Window0 = map->window0.size @ non-cached area base = SDRAM
+ * Window1 = map->window1.size @ cached area base = SDRAM
+ */
+ word = ((map->window0.size - 1) & 0x1ff00001) | 0x01;
+ pci_write_reg(0x07f00001, SH4_PCILSR0);
+ word = ((map->window1.size - 1) & 0x1ff00001) | 0x01;
+ pci_write_reg(0x00000001, SH4_PCILSR1);
+ /* Set the values on window 0 PCI config registers */
+ word = P2SEGADDR(map->window0.base);
+ pci_write_reg(0xa8000000, SH4_PCILAR0);
+ pci_write_reg(0x08000000, SH7780_PCIMBAR0);
+ /* Set the values on window 1 PCI config registers */
+ word = P2SEGADDR(map->window1.base);
+ pci_write_reg(0x00000000, SH4_PCILAR1);
+ pci_write_reg(0x00000000, SH7780_PCIMBAR1);
+
+ /* Map IO space into PCI IO window
+ * The IO window is 64K-PCIBIOS_MIN_IO in size
+ * IO addresses will be translated to the
+ * PCI IO window base address
+ */
+ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
+ PCIBIOS_MIN_IO, (64 << 10),
+ SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
+
+ /* NOTE: I'm ignoring the PCI error IRQs for now..
+ * TODO: add support for the internal error interrupts and
+ * DMA interrupts...
+ */
+
+#ifdef CONFIG_SH_R7780RP
+ pci_fixup_pcic();
+#endif
+
+ /* SH7780 init done, set central function init complete */
+ /* use round robin mode to stop a device starving/overruning */
+ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
+ pci_write_reg(word, SH4_PCICR);
+
+ return 1;
+}
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
new file mode 100644
index 0000000..f02d218
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -0,0 +1,94 @@
+/*
+ * Low-Level PCI Support for SH7780 targets
+ *
+ * Dustin McIntire (dustin@sensoria.com) (c) 2001
+ * Paul Mundt (lethal@linux-sh.org) (c) 2003
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ */
+
+#ifndef _PCI_SH7780_H_
+#define _PCI_SH7780_H_
+
+/* Platform Specific Values */
+#define SH7780_VENDOR_ID 0x1912
+#define SH7780_DEVICE_ID 0x0002
+#define SH7781_DEVICE_ID 0x0001
+
+/* SH7780 Control Registers */
+#define SH7780_PCI_VCR0 0xFE000000
+#define SH7780_PCI_VCR1 0xFE000004
+#define SH7780_PCI_VCR2 0xFE000008
+
+/* SH7780 Specific Values */
+#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
+#define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */
+
+#define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */
+#define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
+
+#define SH7780_PCI_IO_BASE 0xFE400000 /* IO space base address */
+#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
+
+#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
+#define PCI_REG(n) (SH7780_PCIREG_BASE+n)
+
+/* SH7780 PCI Config Registers */
+#define SH7780_PCIVID 0x000 /* Vendor ID */
+#define SH7780_PCIDID 0x002 /* Device ID */
+#define SH7780_PCICMD 0x004 /* Command */
+#define SH7780_PCISTATUS 0x006 /* Status */
+#define SH7780_PCIRID 0x008 /* Revision ID */
+#define SH7780_PCIPIF 0x009 /* Program Interface */
+#define SH7780_PCISUB 0x00a /* Sub class code */
+#define SH7780_PCIBCC 0x00b /* Base class code */
+#define SH7780_PCICLS 0x00c /* Cache line size */
+#define SH7780_PCILTM 0x00d /* latency timer */
+#define SH7780_PCIHDR 0x00e /* Header type */
+#define SH7780_PCIBIST 0x00f /* BIST */
+#define SH7780_PCIIBAR 0x010 /* IO Base address */
+#define SH7780_PCIMBAR0 0x014 /* Memory base address0 */
+#define SH7780_PCIMBAR1 0x018 /* Memory base address1 */
+#define SH7780_PCISVID 0x02c /* Sub system vendor ID */
+#define SH7780_PCISID 0x02e /* Sub system ID */
+#define SH7780_PCICP 0x034
+#define SH7780_PCIINTLINE 0x03c /* Interrupt line */
+#define SH7780_PCIINTPIN 0x03d /* Interrupt pin */
+#define SH7780_PCIMINGNT 0x03e /* Minumum grand */
+#define SH7780_PCIMAXLAT 0x03f /* Maxmum latency */
+#define SH7780_PCICID 0x040
+#define SH7780_PCINIP 0x041
+#define SH7780_PCIPMC 0x042
+#define SH7780_PCIPMCSR 0x044
+#define SH7780_PCIPMCSR_BSE 0x046
+#define SH7780_PCICDD 0x047
+
+#define SH7780_PCIMBR0 0x1E0
+#define SH7780_PCIMBMR0 0x1E4
+#define SH7780_PCIMBR2 0x1F0
+#define SH7780_PCIMBMR2 0x1F4
+#define SH7780_PCIIOBR 0x1F8
+#define SH7780_PCIIOBMR 0x1FC
+#define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */
+#define SH7780_PCICSCR1 0x214 /* Cache Snoop2 Cnt. Register */
+#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
+#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
+
+/* General Memory Config Addresses */
+#define SH7780_CS0_BASE_ADDR 0x0
+#define SH7780_MEM_REGION_SIZE 0x04000000
+#define SH7780_CS1_BASE_ADDR (SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS2_BASE_ADDR (SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS3_BASE_ADDR (SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS4_BASE_ADDR (SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+
+struct sh4_pci_address_map;
+
+/* arch/sh/drivers/pci/pci-sh7780.c */
+int sh7780_pcic_init(struct sh4_pci_address_map *map);
+
+#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
index 7c81b8b..4ab5ea6 100644
--- a/arch/sh/drivers/pci/pci-st40.c
+++ b/arch/sh/drivers/pci/pci-st40.c
@@ -70,12 +70,6 @@
static void pci_set_rbar_region(unsigned int region, unsigned long localAddr,
unsigned long pciOffset, unsigned long regionSize);
-/*
- * The pcibios_map_platform_irq function is defined in the appropriate
- * board specific code and referenced here
- */
-extern int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
-
static __init void SetPCIPLL(void)
{
{
@@ -422,13 +416,6 @@
/* Everything hangs off this */
static struct pci_bus *pci_root_bus;
-
-static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
-{
- return PCI_SLOT(dev->devfn);
-}
-
-
static int __init pcibios_init(void)
{
extern unsigned long memory_start, memory_end;
@@ -465,17 +452,11 @@
/* ok, do the scan man */
pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL);
pci_assign_unassigned_resources();
- pci_fixup_irqs(no_swizzle, pcibios_map_platform_irq);
return 0;
}
-
subsys_initcall(pcibios_init);
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-}
-
/*
* Publish a region of local address space over the PCI bus
* to other devices.
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 3d546ba..d439336 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -1,21 +1,45 @@
-/* arch/sh/kernel/pci.c
- * $Id: pci.c,v 1.1 2003/08/24 19:15:45 lethal Exp $
+/*
+ * arch/sh/drivers/pci/pci.c
*
* Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org>
- *
- *
+ * Copyright (c) 2004 - 2006 Paul Mundt <lethal@linux-sh.org>
+ *
* These functions are collected here to reduce duplication of common
* code amongst the many platform-specific PCI support code files.
- *
+ *
* These routines require the following board-specific routines:
* void pcibios_fixup_irqs();
*
* See include/asm-sh/pci.h for more information.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <asm/io.h>
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+static u8 __init simple_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ u8 pin = *pinp;
+
+ while (dev->bus->parent) {
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ }
+ *pinp = pin;
+
+ /* The slot is the slot of the last bridge. */
+ return PCI_SLOT(dev->devfn);
+}
static int __init pcibios_init(void)
{
@@ -26,26 +50,32 @@
#ifdef CONFIG_PCI_AUTO
/* assign resources */
busno = 0;
- for (p = board_pci_channels; p->pci_ops != NULL; p++) {
+ for (p = board_pci_channels; p->pci_ops != NULL; p++)
busno = pciauto_assign_resources(busno, p) + 1;
- }
#endif
/* scan the buses */
busno = 0;
- for (p= board_pci_channels; p->pci_ops != NULL; p++) {
+ for (p = board_pci_channels; p->pci_ops != NULL; p++) {
bus = pci_scan_bus(busno, p->pci_ops, p);
- busno = bus->subordinate+1;
+ busno = bus->subordinate + 1;
}
- /* board-specific fixups */
- pcibios_fixup_irqs();
+ pci_fixup_irqs(simple_swizzle, pcibios_map_platform_irq);
return 0;
}
-
subsys_initcall(pcibios_init);
+/*
+ * Called after each bus is probed, but before its children
+ * are examined.
+ */
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+ pci_read_bridge_bases(bus);
+}
+
void
pcibios_update_resource(struct pci_dev *dev, struct resource *root,
struct resource *res, int resource)
@@ -61,13 +91,17 @@
new |= PCI_ROM_ADDRESS_ENABLE;
reg = dev->rom_base_reg;
} else {
- /* Somebody might have asked allocation of a non-standard resource */
+ /*
+ * Somebody might have asked allocation of a non-standard
+ * resource
+ */
return;
}
-
+
pci_write_config_dword(dev, reg, new);
pci_read_config_dword(dev, reg, &check);
- if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
+ if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
+ PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
printk(KERN_ERR "PCI: Error while updating region "
"%s/%d (%08x != %08x)\n", pci_name(dev), resource,
new, check);
@@ -145,7 +179,8 @@
lat = pcibios_max_latency;
else
return;
- printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
+ printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n",
+ pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
@@ -153,3 +188,39 @@
{
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (unlikely(!len || !start))
+ return NULL;
+ if (maxlen && len > maxlen)
+ len = maxlen;
+
+ /*
+ * Presently the IORESOURCE_MEM case is a bit special, most
+ * SH7751 style PCI controllers have PCI memory at a fixed
+ * location in the address space where no remapping is desired
+ * (typically at 0xfd000000, but is_pci_memaddr() will know
+ * best). With the IORESOURCE_MEM case more care has to be taken
+ * to inhibit page table mapping for legacy cores, but this is
+ * punted off to __ioremap().
+ * -- PFM.
+ */
+ if (flags & IORESOURCE_IO)
+ return ioport_map(start, len);
+ if (flags & IORESOURCE_MEM)
+ return ioremap(start, len);
+
+ return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ iounmap(addr);
+}
+EXPORT_SYMBOL(pci_iounmap);
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index f05cd96..5da88a4 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -6,9 +6,10 @@
obj-y := process.o signal.o entry.o traps.o irq.o \
ptrace.o setup.o time.o sys_sh.o semaphore.o \
- io.o io_generic.o sh_ksyms.o
+ io.o io_generic.o sh_ksyms.o syscalls.o
obj-y += cpu/ timers/
+obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_CF_ENABLER) += cf-enabler.o
@@ -18,3 +19,5 @@
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_APM) += apm.o
+obj-$(CONFIG_PM) += pm.o
diff --git a/arch/sh/kernel/apm.c b/arch/sh/kernel/apm.c
new file mode 100644
index 0000000..871e7d6
--- /dev/null
+++ b/arch/sh/kernel/apm.c
@@ -0,0 +1,539 @@
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * based on ARM APM driver by
+ * Jamey Hicks <jamey@crl.dec.com>
+ *
+ * adapted from the APM BIOS driver for Linux by
+ * Stephen Rothwell (sfr@linuxcare.com)
+ *
+ * APM 1.2 Reference:
+ * Intel Corporation, Microsoft Corporation. Advanced Power Management
+ * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
+ *
+ * [This document is available from Microsoft at:
+ * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/miscdevice.h>
+#include <linux/apm_bios.h>
+#include <linux/pm.h>
+#include <linux/pm_legacy.h>
+#include <asm/apm.h>
+
+#define MODNAME "apm"
+
+/*
+ * The apm_bios device is one of the misc char devices.
+ * This is its minor number.
+ */
+#define APM_MINOR_DEV 134
+
+/*
+ * Maximum number of events stored
+ */
+#define APM_MAX_EVENTS 16
+
+struct apm_queue {
+ unsigned int event_head;
+ unsigned int event_tail;
+ apm_event_t events[APM_MAX_EVENTS];
+};
+
+/*
+ * The per-file APM data
+ */
+struct apm_user {
+ struct list_head list;
+
+ unsigned int suser: 1;
+ unsigned int writer: 1;
+ unsigned int reader: 1;
+
+ int suspend_result;
+ unsigned int suspend_state;
+#define SUSPEND_NONE 0 /* no suspend pending */
+#define SUSPEND_PENDING 1 /* suspend pending read */
+#define SUSPEND_READ 2 /* suspend read, pending ack */
+#define SUSPEND_ACKED 3 /* suspend acked */
+#define SUSPEND_DONE 4 /* suspend completed */
+
+ struct apm_queue queue;
+};
+
+/*
+ * Local variables
+ */
+static int suspends_pending;
+
+static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
+static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
+
+/*
+ * This is a list of everyone who has opened /dev/apm_bios
+ */
+static DECLARE_RWSEM(user_list_lock);
+static LIST_HEAD(apm_user_list);
+
+/*
+ * kapmd info. kapmd provides us a process context to handle
+ * "APM" events within - specifically necessary if we're going
+ * to be suspending the system.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
+static DECLARE_COMPLETION(kapmd_exit);
+static DEFINE_SPINLOCK(kapmd_queue_lock);
+static struct apm_queue kapmd_queue;
+
+int apm_suspended;
+EXPORT_SYMBOL(apm_suspended);
+
+/* Platform-specific apm_read_proc(). */
+int (*apm_get_info)(char *buf, char **start, off_t fpos, int length);
+EXPORT_SYMBOL(apm_get_info);
+
+/*
+ * APM event queue management.
+ */
+static inline int queue_empty(struct apm_queue *q)
+{
+ return q->event_head == q->event_tail;
+}
+
+static inline apm_event_t queue_get_event(struct apm_queue *q)
+{
+ q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+ return q->events[q->event_tail];
+}
+
+static void queue_add_event(struct apm_queue *q, apm_event_t event)
+{
+ q->event_head = (q->event_head + 1) % APM_MAX_EVENTS;
+ if (q->event_head == q->event_tail) {
+ static int notified;
+
+ if (notified++ == 0)
+ printk(KERN_ERR "apm: an event queue overflowed\n");
+
+ q->event_tail = (q->event_tail + 1) % APM_MAX_EVENTS;
+ }
+ q->events[q->event_head] = event;
+}
+
+static void queue_event_one_user(struct apm_user *as, apm_event_t event)
+{
+ if (as->suser && as->writer) {
+ switch (event) {
+ case APM_SYS_SUSPEND:
+ case APM_USER_SUSPEND:
+ /*
+ * If this user already has a suspend pending,
+ * don't queue another one.
+ */
+ if (as->suspend_state != SUSPEND_NONE)
+ return;
+
+ as->suspend_state = SUSPEND_PENDING;
+ suspends_pending++;
+ break;
+ }
+ }
+ queue_add_event(&as->queue, event);
+}
+
+static void queue_event(apm_event_t event, struct apm_user *sender)
+{
+ struct apm_user *as;
+
+ down_read(&user_list_lock);
+
+ list_for_each_entry(as, &apm_user_list, list)
+ if (as != sender && as->reader)
+ queue_event_one_user(as, event);
+
+ up_read(&user_list_lock);
+ wake_up_interruptible(&apm_waitqueue);
+}
+
+/**
+ * apm_queue_event - queue an APM event for kapmd
+ * @event: APM event
+ *
+ * Queue an APM event for kapmd to process and ultimately take the
+ * appropriate action. Only a subset of events are handled:
+ * %APM_LOW_BATTERY
+ * %APM_POWER_STATUS_CHANGE
+ * %APM_USER_SUSPEND
+ * %APM_SYS_SUSPEND
+ * %APM_CRITICAL_SUSPEND
+ */
+void apm_queue_event(apm_event_t event)
+{
+ spin_lock_irq(&kapmd_queue_lock);
+ queue_add_event(&kapmd_queue, event);
+ spin_unlock_irq(&kapmd_queue_lock);
+
+ wake_up_interruptible(&kapmd_wait);
+}
+EXPORT_SYMBOL(apm_queue_event);
+
+static void apm_suspend(void)
+{
+ struct apm_user *as;
+ int err;
+
+ apm_suspended = 1;
+ err = pm_suspend(PM_SUSPEND_MEM);
+
+ /*
+ * Anyone on the APM queues will think we're still suspended.
+ * Send a message so everyone knows we're now awake again.
+ */
+ queue_event(APM_NORMAL_RESUME, NULL);
+
+ /*
+ * Finally, wake up anyone who is sleeping on the suspend.
+ */
+ down_read(&user_list_lock);
+ list_for_each_entry(as, &apm_user_list, list) {
+ as->suspend_result = err;
+ as->suspend_state = SUSPEND_DONE;
+ }
+ up_read(&user_list_lock);
+
+ wake_up(&apm_suspend_waitqueue);
+ apm_suspended = 0;
+}
+
+static ssize_t apm_read(struct file *fp, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct apm_user *as = fp->private_data;
+ apm_event_t event;
+ int i = count, ret = 0;
+
+ if (count < sizeof(apm_event_t))
+ return -EINVAL;
+
+ if (queue_empty(&as->queue) && fp->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ wait_event_interruptible(apm_waitqueue, !queue_empty(&as->queue));
+
+ while ((i >= sizeof(event)) && !queue_empty(&as->queue)) {
+ event = queue_get_event(&as->queue);
+
+ ret = -EFAULT;
+ if (copy_to_user(buf, &event, sizeof(event)))
+ break;
+
+ if (event == APM_SYS_SUSPEND || event == APM_USER_SUSPEND)
+ as->suspend_state = SUSPEND_READ;
+
+ buf += sizeof(event);
+ i -= sizeof(event);
+ }
+
+ if (i < count)
+ ret = count - i;
+
+ return ret;
+}
+
+static unsigned int apm_poll(struct file *fp, poll_table * wait)
+{
+ struct apm_user *as = fp->private_data;
+
+ poll_wait(fp, &apm_waitqueue, wait);
+ return queue_empty(&as->queue) ? 0 : POLLIN | POLLRDNORM;
+}
+
+/*
+ * apm_ioctl - handle APM ioctl
+ *
+ * APM_IOC_SUSPEND
+ * This IOCTL is overloaded, and performs two functions. It is used to:
+ * - initiate a suspend
+ * - acknowledge a suspend read from /dev/apm_bios.
+ * Only when everyone who has opened /dev/apm_bios with write permission
+ * has acknowledge does the actual suspend happen.
+ */
+static int
+apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg)
+{
+ struct apm_user *as = filp->private_data;
+ unsigned long flags;
+ int err = -EINVAL;
+
+ if (!as->suser || !as->writer)
+ return -EPERM;
+
+ switch (cmd) {
+ case APM_IOC_SUSPEND:
+ as->suspend_result = -EINTR;
+
+ if (as->suspend_state == SUSPEND_READ) {
+ /*
+ * If we read a suspend command from /dev/apm_bios,
+ * then the corresponding APM_IOC_SUSPEND ioctl is
+ * interpreted as an acknowledge.
+ */
+ as->suspend_state = SUSPEND_ACKED;
+ suspends_pending--;
+ } else {
+ /*
+ * Otherwise it is a request to suspend the system.
+ * Queue an event for all readers, and expect an
+ * acknowledge from all writers who haven't already
+ * acknowledged.
+ */
+ queue_event(APM_USER_SUSPEND, as);
+ }
+
+ /*
+ * If there are no further acknowledges required, suspend
+ * the system.
+ */
+ if (suspends_pending == 0)
+ apm_suspend();
+
+ /*
+ * Wait for the suspend/resume to complete. If there are
+ * pending acknowledges, we wait here for them.
+ *
+ * Note that we need to ensure that the PM subsystem does
+ * not kick us out of the wait when it suspends the threads.
+ */
+ flags = current->flags;
+ current->flags |= PF_NOFREEZE;
+
+ /*
+ * Note: do not allow a thread which is acking the suspend
+ * to escape until the resume is complete.
+ */
+ if (as->suspend_state == SUSPEND_ACKED)
+ wait_event(apm_suspend_waitqueue,
+ as->suspend_state == SUSPEND_DONE);
+ else
+ wait_event_interruptible(apm_suspend_waitqueue,
+ as->suspend_state == SUSPEND_DONE);
+
+ current->flags = flags;
+ err = as->suspend_result;
+ as->suspend_state = SUSPEND_NONE;
+ break;
+ }
+
+ return err;
+}
+
+static int apm_release(struct inode * inode, struct file * filp)
+{
+ struct apm_user *as = filp->private_data;
+ filp->private_data = NULL;
+
+ down_write(&user_list_lock);
+ list_del(&as->list);
+ up_write(&user_list_lock);
+
+ /*
+ * We are now unhooked from the chain. As far as new
+ * events are concerned, we no longer exist. However, we
+ * need to balance suspends_pending, which means the
+ * possibility of sleeping.
+ */
+ if (as->suspend_state != SUSPEND_NONE) {
+ suspends_pending -= 1;
+ if (suspends_pending == 0)
+ apm_suspend();
+ }
+
+ kfree(as);
+ return 0;
+}
+
+static int apm_open(struct inode * inode, struct file * filp)
+{
+ struct apm_user *as;
+
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
+ if (as) {
+ /*
+ * XXX - this is a tiny bit broken, when we consider BSD
+ * process accounting. If the device is opened by root, we
+ * instantly flag that we used superuser privs. Who knows,
+ * we might close the device immediately without doing a
+ * privileged operation -- cevans
+ */
+ as->suser = capable(CAP_SYS_ADMIN);
+ as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE;
+ as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ;
+
+ down_write(&user_list_lock);
+ list_add(&as->list, &apm_user_list);
+ up_write(&user_list_lock);
+
+ filp->private_data = as;
+ }
+
+ return as ? 0 : -ENOMEM;
+}
+
+static struct file_operations apm_bios_fops = {
+ .owner = THIS_MODULE,
+ .read = apm_read,
+ .poll = apm_poll,
+ .ioctl = apm_ioctl,
+ .open = apm_open,
+ .release = apm_release,
+};
+
+static struct miscdevice apm_device = {
+ .minor = APM_MINOR_DEV,
+ .name = "apm_bios",
+ .fops = &apm_bios_fops
+};
+
+
+#ifdef CONFIG_PROC_FS
+/*
+ * Arguments, with symbols from linux/apm_bios.h.
+ *
+ * 0) Linux driver version (this will change if format changes)
+ * 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
+ * 2) APM flags from APM Installation Check (0x00):
+ * bit 0: APM_16_BIT_SUPPORT
+ * bit 1: APM_32_BIT_SUPPORT
+ * bit 2: APM_IDLE_SLOWS_CLOCK
+ * bit 3: APM_BIOS_DISABLED
+ * bit 4: APM_BIOS_DISENGAGED
+ * 3) AC line status
+ * 0x00: Off-line
+ * 0x01: On-line
+ * 0x02: On backup power (BIOS >= 1.1 only)
+ * 0xff: Unknown
+ * 4) Battery status
+ * 0x00: High
+ * 0x01: Low
+ * 0x02: Critical
+ * 0x03: Charging
+ * 0x04: Selected battery not present (BIOS >= 1.2 only)
+ * 0xff: Unknown
+ * 5) Battery flag
+ * bit 0: High
+ * bit 1: Low
+ * bit 2: Critical
+ * bit 3: Charging
+ * bit 7: No system battery
+ * 0xff: Unknown
+ * 6) Remaining battery life (percentage of charge):
+ * 0-100: valid
+ * -1: Unknown
+ * 7) Remaining battery life (time units):
+ * Number of remaining minutes or seconds
+ * -1: Unknown
+ * 8) min = minutes; sec = seconds
+ */
+static int apm_read_proc(char *buf, char **start, off_t fpos, int length)
+{
+ if (likely(apm_get_info))
+ return apm_get_info(buf, start, fpos, length);
+
+ return -EINVAL;
+}
+#endif
+
+static int kapmd(void *arg)
+{
+ daemonize("kapmd");
+ current->flags |= PF_NOFREEZE;
+
+ do {
+ apm_event_t event;
+
+ wait_event_interruptible(kapmd_wait,
+ !queue_empty(&kapmd_queue) || !pm_active);
+
+ if (!pm_active)
+ break;
+
+ spin_lock_irq(&kapmd_queue_lock);
+ event = 0;
+ if (!queue_empty(&kapmd_queue))
+ event = queue_get_event(&kapmd_queue);
+ spin_unlock_irq(&kapmd_queue_lock);
+
+ switch (event) {
+ case 0:
+ break;
+
+ case APM_LOW_BATTERY:
+ case APM_POWER_STATUS_CHANGE:
+ queue_event(event, NULL);
+ break;
+
+ case APM_USER_SUSPEND:
+ case APM_SYS_SUSPEND:
+ queue_event(event, NULL);
+ if (suspends_pending == 0)
+ apm_suspend();
+ break;
+
+ case APM_CRITICAL_SUSPEND:
+ apm_suspend();
+ break;
+ }
+ } while (1);
+
+ complete_and_exit(&kapmd_exit, 0);
+}
+
+static int __init apm_init(void)
+{
+ int ret;
+
+ pm_active = 1;
+
+ ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
+ if (unlikely(ret < 0)) {
+ pm_active = 0;
+ return ret;
+ }
+
+ create_proc_info_entry("apm", 0, NULL, apm_read_proc);
+
+ ret = misc_register(&apm_device);
+ if (unlikely(ret != 0)) {
+ remove_proc_entry("apm", NULL);
+
+ pm_active = 0;
+ wake_up(&kapmd_wait);
+ wait_for_completion(&kapmd_exit);
+ }
+
+ return ret;
+}
+
+static void __exit apm_exit(void)
+{
+ misc_deregister(&apm_device);
+ remove_proc_entry("apm", NULL);
+
+ pm_active = 0;
+ wake_up(&kapmd_wait);
+ wait_for_completion(&kapmd_exit);
+}
+
+module_init(apm_init);
+module_exit(apm_exit);
+
+MODULE_AUTHOR("Stephen Rothwell, Andriy Skulysh");
+MODULE_DESCRIPTION("Advanced Power Management");
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index f1f9ab8..3e5fa1e 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -10,7 +10,8 @@
*/
#include <linux/init.h>
-
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -32,8 +33,6 @@
/* SH4 can't access PCMCIA interface through P2 area.
* we must remap it with appropreate attribute bit of the page set.
* this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
#if defined(CONFIG_CF_AREA6)
#define slot_no 0
@@ -41,9 +40,6 @@
#define slot_no 1
#endif
-/* defined in mm/ioremap.c */
-extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags);
-
/* use this pointer to access to directly connected compact flash io area*/
void *cf_io_base;
@@ -62,7 +58,7 @@
return -ENOMEM;
}
/* printk("p3_ioremap(paddr=0x%08lx, psize=0x%08lx, prot=0x%08lx)=0x%08lx\n",
- paddrbase, psize, prot.pgprot, cf_io_base);*/
+ paddrbase, psize, prot.pgprot, cf_io_base);*/
/* XXX : do we need attribute and common-memory area also? */
@@ -87,7 +83,7 @@
}
#if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se/se.h>
+#include <asm/se.h>
/*
* SolutionEngine
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 59d5b74..fb5dac0 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -8,6 +8,5 @@
obj-$(CONFIG_CPU_SH3) += sh3/
obj-$(CONFIG_CPU_SH4) += sh4/
-obj-$(CONFIG_SH_RTC) += rtc.o
obj-$(CONFIG_UBC_WAKEUP) += ubc.o
obj-$(CONFIG_SH_ADC) += adc.o
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 97fa37f..51ec64c 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -1,7 +1,7 @@
/*
* arch/sh/kernel/cpu/clock.c - SuperH clock framework
*
- * Copyright (C) 2005 Paul Mundt
+ * Copyright (C) 2005, 2006 Paul Mundt
*
* This clock framework is derived from the OMAP version by:
*
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/kref.h>
#include <linux/seq_file.h>
@@ -24,7 +25,7 @@
static LIST_HEAD(clock_list);
static DEFINE_SPINLOCK(clock_lock);
-static DECLARE_MUTEX(clock_list_sem);
+static DEFINE_MUTEX(clock_list_sem);
/*
* Each subtype is expected to define the init routines for these clocks,
@@ -140,21 +141,21 @@
int clk_register(struct clk *clk)
{
- down(&clock_list_sem);
+ mutex_lock(&clock_list_sem);
list_add(&clk->node, &clock_list);
kref_init(&clk->kref);
- up(&clock_list_sem);
+ mutex_unlock(&clock_list_sem);
return 0;
}
void clk_unregister(struct clk *clk)
{
- down(&clock_list_sem);
+ mutex_lock(&clock_list_sem);
list_del(&clk->node);
- up(&clock_list_sem);
+ mutex_unlock(&clock_list_sem);
}
inline unsigned long clk_get_rate(struct clk *clk)
@@ -198,14 +199,14 @@
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
- down(&clock_list_sem);
+ mutex_lock(&clock_list_sem);
list_for_each_entry(p, &clock_list, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clock_list_sem);
+ mutex_unlock(&clock_list_sem);
return clk;
}
@@ -225,7 +226,7 @@
{
int i, ret = 0;
- BUG_ON(unlikely(!master_clk.rate));
+ BUG_ON(!master_clk.rate);
for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
struct clk *clk = onchip_clocks[i];
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 868e68b..bfb90eb 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -4,6 +4,7 @@
* CPU init code
*
* Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2003 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -13,6 +14,7 @@
#include <linux/kernel.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
+#include <asm/page.h>
#include <asm/system.h>
#include <asm/cacheflush.h>
#include <asm/cache.h>
@@ -51,7 +53,15 @@
ccr = ctrl_inl(CCR);
/*
- * If the cache is already enabled .. flush it.
+ * At this point we don't know whether the cache is enabled or not - a
+ * bootloader may have enabled it. There are at least 2 things that
+ * could be dirty in the cache at this point:
+ * 1. kernel command line set up by boot loader
+ * 2. spilled registers from the prolog of this function
+ * => before re-initialising the cache, we must do a purge of the whole
+ * cache out to memory for safety. As long as nothing is spilled
+ * during the loop to lines that have already been done, this is safe.
+ * - RPC
*/
if (ccr & CCR_CACHE_ENABLE) {
unsigned long ways, waysize, addrstart;
@@ -98,6 +108,8 @@
/* Force EMODE if possible */
if (cpu_data->dcache.ways > 1)
flags |= CCR_CACHE_EMODE;
+ else
+ flags &= ~CCR_CACHE_EMODE;
#endif
#ifdef CONFIG_SH_WRITETHROUGH
@@ -112,6 +124,9 @@
/* Turn on OCRAM -- halve the OC */
flags |= CCR_CACHE_ORA;
cpu_data->dcache.sets >>= 1;
+
+ cpu_data->dcache.way_size = cpu_data->dcache.sets *
+ cpu_data->dcache.linesz;
#endif
ctrl_outl(flags, CCR);
@@ -184,6 +199,10 @@
/* Init the cache */
cache_init();
+ shm_align_mask = max_t(unsigned long,
+ cpu_data->dcache.way_size - 1,
+ PAGE_SIZE - 1);
+
/* Disable the FPU */
if (fpu_disabled) {
printk("FPU Disabled\n");
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index e3cccea..1c034c2 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -3,5 +3,6 @@
#
obj-y += ipr.o imask.o
-obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
-obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
+obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
+obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o
+obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index 30064bf..e30e4b7 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -241,9 +241,9 @@
/* 110-111 reserved/unused */
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
{ TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
-#ifdef CONFIG_SH_RTC
- { RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
-#endif
+ { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
+ { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY },
+ { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY },
{ SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
{ SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
{ SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 0f54594..f785822 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -57,31 +57,27 @@
static void disable_ipr_irq(unsigned int irq)
{
- unsigned long val, flags;
+ unsigned long val;
unsigned int addr = ipr_data[irq].addr;
unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift);
/* Set the priority in IPR to 0 */
- local_irq_save(flags);
val = ctrl_inw(addr);
val &= mask;
ctrl_outw(val, addr);
- local_irq_restore(flags);
}
static void enable_ipr_irq(unsigned int irq)
{
- unsigned long val, flags;
+ unsigned long val;
unsigned int addr = ipr_data[irq].addr;
int priority = ipr_data[irq].priority;
unsigned short value = (priority << ipr_data[irq].shift);
/* Set priority in IPR back to original value */
- local_irq_save(flags);
val = ctrl_inw(addr);
val |= value;
ctrl_outw(val, addr);
- local_irq_restore(flags);
}
static void mask_and_ack_ipr(unsigned int irq)
@@ -89,6 +85,7 @@
disable_ipr_irq(irq);
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
/* This is needed when we use edge triggered setting */
/* XXX: Is it really needed? */
@@ -123,7 +120,7 @@
#ifndef CONFIG_CPU_SUBTYPE_SH7780
make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
-#if defined(CONFIG_SH_RTC)
+#ifdef RTC_IRQ
make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
#endif
@@ -162,6 +159,7 @@
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
/*
* Initialize the Interrupt Controller (INTC)
@@ -192,6 +190,8 @@
/* Perform the machine specific initialisation */
if (sh_mv.mv_init_irq != NULL)
sh_mv.mv_init_irq();
+
+ irq_ctx_init(smp_processor_id());
}
#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
diff --git a/arch/sh/boards/adx/irq_maskreg.c b/arch/sh/kernel/cpu/irq/maskreg.c
similarity index 63%
rename from arch/sh/boards/adx/irq_maskreg.c
rename to arch/sh/kernel/cpu/irq/maskreg.c
index 4b2abe5..492db31 100644
--- a/arch/sh/boards/adx/irq_maskreg.c
+++ b/arch/sh/kernel/cpu/irq/maskreg.c
@@ -1,30 +1,23 @@
/*
- * linux/arch/sh/kernel/irq_maskreg.c
+ * Interrupt handling for Simple external interrupt mask register
*
* Copyright (C) 2001 A&D Co., Ltd. <http://www.aandd.co.jp>
*
- * This file may be copied or modified under the terms of the GNU
- * General Public License. See linux/COPYING for more information.
- *
- * Interrupt handling for Simple external interrupt mask register
- *
* This is for the machine which have single 16 bit register
* for masking external IRQ individually.
- * Each bit of the register is for masking each interrupt.
+ * Each bit of the register is for masking each interrupt.
+ *
+ * This file may be copied or modified under the terms of the GNU
+ * General Public License. See linux/COPYING for more information.
*/
-
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
-
#include <asm/system.h>
#include <asm/io.h>
-#include <asm/machvec.h>
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-unsigned short *irq_mask_register = 0;
+/* address of external interrupt mask register */
+unsigned long irq_mask_register;
/* forward declaration */
static unsigned int startup_maskreg_irq(unsigned int irq);
@@ -36,7 +29,7 @@
/* hw_interrupt_type */
static struct hw_interrupt_type maskreg_irq_type = {
- .typename = " Mask Register",
+ .typename = "Mask Register",
.startup = startup_maskreg_irq,
.shutdown = shutdown_maskreg_irq,
.enable = enable_maskreg_irq,
@@ -47,7 +40,7 @@
/* actual implementatin */
static unsigned int startup_maskreg_irq(unsigned int irq)
-{
+{
enable_maskreg_irq(irq);
return 0; /* never anything pending */
}
@@ -59,32 +52,26 @@
static void disable_maskreg_irq(unsigned int irq)
{
- if (irq_mask_register) {
- unsigned long flags;
- unsigned short val, mask = 0x01 << irq;
+ unsigned short val, mask = 0x01 << irq;
- /* Set "irq"th bit */
- local_irq_save(flags);
- val = ctrl_inw((unsigned long)irq_mask_register);
- val |= mask;
- ctrl_outw(val, (unsigned long)irq_mask_register);
- local_irq_restore(flags);
- }
+ BUG_ON(!irq_mask_register);
+
+ /* Set "irq"th bit */
+ val = ctrl_inw(irq_mask_register);
+ val |= mask;
+ ctrl_outw(val, irq_mask_register);
}
static void enable_maskreg_irq(unsigned int irq)
{
- if (irq_mask_register) {
- unsigned long flags;
- unsigned short val, mask = ~(0x01 << irq);
+ unsigned short val, mask = ~(0x01 << irq);
- /* Clear "irq"th bit */
- local_irq_save(flags);
- val = ctrl_inw((unsigned long)irq_mask_register);
- val &= mask;
- ctrl_outw(val, (unsigned long)irq_mask_register);
- local_irq_restore(flags);
- }
+ BUG_ON(!irq_mask_register);
+
+ /* Clear "irq"th bit */
+ val = ctrl_inw(irq_mask_register);
+ val &= mask;
+ ctrl_outw(val, irq_mask_register);
}
static void mask_and_ack_maskreg(unsigned int irq)
@@ -101,6 +88,6 @@
void make_maskreg_irq(unsigned int irq)
{
disable_irq_nosync(irq);
- irq_desc[irq].chip = &maskreg_irq_type;
+ irq_desc[irq].handler = &maskreg_irq_type;
disable_maskreg_irq(irq);
}
diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c
index 80cd810..17f47b3 100644
--- a/arch/sh/kernel/cpu/irq/pint.c
+++ b/arch/sh/kernel/cpu/irq/pint.c
@@ -48,26 +48,22 @@
static void disable_pint_irq(unsigned int irq)
{
- unsigned long val, flags;
+ unsigned long val;
- local_irq_save(flags);
val = ctrl_inw(INTC_INTER);
val &= ~(1 << (irq - PINT_IRQ_BASE));
ctrl_outw(val, INTC_INTER); /* disable PINTn */
portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
- local_irq_restore(flags);
}
static void enable_pint_irq(unsigned int irq)
{
- unsigned long val, flags;
+ unsigned long val;
- local_irq_save(flags);
val = ctrl_inw(INTC_INTER);
val |= 1 << (irq - PINT_IRQ_BASE);
ctrl_outw(val, INTC_INTER); /* enable PINTn */
portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
- local_irq_restore(flags);
}
static void mask_and_ack_pint(unsigned int irq)
diff --git a/arch/sh/kernel/cpu/rtc.c b/arch/sh/kernel/cpu/rtc.c
deleted file mode 100644
index 4304cf7..0000000
--- a/arch/sh/kernel/cpu/rtc.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc.c -- SH3 / SH4 on-chip RTC support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-
-void sh_rtc_gettimeofday(struct timespec *ts)
-{
- unsigned int sec128, sec, sec2, min, hr, wk, day, mon, yr, yr100, cf_bit;
- unsigned long flags;
-
- again:
- do {
- local_irq_save(flags);
- ctrl_outb(0, RCR1); /* Clear CF-bit */
- sec128 = ctrl_inb(R64CNT);
- sec = ctrl_inb(RSECCNT);
- min = ctrl_inb(RMINCNT);
- hr = ctrl_inb(RHRCNT);
- wk = ctrl_inb(RWKCNT);
- day = ctrl_inb(RDAYCNT);
- mon = ctrl_inb(RMONCNT);
-#if defined(CONFIG_CPU_SH4)
- yr = ctrl_inw(RYRCNT);
- yr100 = (yr >> 8);
- yr &= 0xff;
-#else
- yr = ctrl_inb(RYRCNT);
- yr100 = (yr == 0x99) ? 0x19 : 0x20;
-#endif
- sec2 = ctrl_inb(R64CNT);
- cf_bit = ctrl_inb(RCR1) & RCR1_CF;
- local_irq_restore(flags);
- } while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0);
-
- BCD_TO_BIN(yr100);
- BCD_TO_BIN(yr);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(day);
- BCD_TO_BIN(hr);
- BCD_TO_BIN(min);
- BCD_TO_BIN(sec);
-
- if (yr > 99 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
- hr > 23 || min > 59 || sec > 59) {
- printk(KERN_ERR
- "SH RTC: invalid value, resetting to 1 Jan 2000\n");
- local_irq_save(flags);
- ctrl_outb(RCR2_RESET, RCR2); /* Reset & Stop */
- ctrl_outb(0, RSECCNT);
- ctrl_outb(0, RMINCNT);
- ctrl_outb(0, RHRCNT);
- ctrl_outb(6, RWKCNT);
- ctrl_outb(1, RDAYCNT);
- ctrl_outb(1, RMONCNT);
-#if defined(CONFIG_CPU_SH4)
- ctrl_outw(0x2000, RYRCNT);
-#else
- ctrl_outb(0, RYRCNT);
-#endif
- ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start */
- goto again;
- }
-
-#if RTC_BIT_INVERTED != 0
- if ((sec128 & RTC_BIT_INVERTED))
- sec--;
-#endif
-
- ts->tv_sec = mktime(yr100 * 100 + yr, mon, day, hr, min, sec);
- ts->tv_nsec = ((sec128 * 1000000) / 128) * 1000;
-}
-
-/*
- * Changed to only care about tv_sec, and not the full timespec struct
- * (i.e. tv_nsec). It can easily be switched to timespec for future cpus
- * that support setting usec or nsec RTC values.
- */
-int sh_rtc_settimeofday(const time_t secs)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
- unsigned long flags;
-
- local_irq_save(flags);
- ctrl_outb(RCR2_RESET, RCR2); /* Reset pre-scaler & stop RTC */
-
- cmos_minutes = ctrl_inb(RMINCNT);
- BCD_TO_BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = secs % 60;
- real_minutes = secs / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
- ctrl_outb(real_seconds, RSECCNT);
- ctrl_outb(real_minutes, RMINCNT);
- } else {
- printk(KERN_WARNING
- "set_rtc_time: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- ctrl_outb(RCR2_RTCEN|RCR2_START, RCR2); /* Start RTC */
- local_irq_restore(flags);
-
- return retval;
-}
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index b54dbb9..58d3815 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -4,10 +4,21 @@
obj-y := ex.o probe.o
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o
+
+# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH3) := clock-sh3.o
clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o
clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7300.o
obj-y += $(clock-y)
-
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7706.c b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
new file mode 100644
index 0000000..0cf96f9
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7706.c
@@ -0,0 +1,84 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7706.c
+ *
+ * SH7706 support for the clock framework
+ *
+ * Copyright (C) 2006 Takashi YOSHII
+ *
+ * Based on arch/sh/kernel/cpu/sh3/clock-sh7709.c
+ * Copyright (C) 2005 Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
+static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
+static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate *= pfc_divisors[idx];
+}
+
+static struct clk_ops sh7706_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7706_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
+
+ clk->rate = clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct clk_ops sh7706_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7706_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7706_clk_ops[] = {
+ &sh7706_master_clk_ops,
+ &sh7706_module_clk_ops,
+ &sh7706_bus_clk_ops,
+ &sh7706_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7706_clk_ops))
+ *ops = sh7706_clk_ops[idx];
+}
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index cc04e9e..44daf44 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -84,8 +84,12 @@
.long do_IRQ ! rovi
.long do_IRQ
.long do_IRQ /* 5E0 */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710)
.long do_IRQ ! 32 IRQ irq0 /* 600 */
.long do_IRQ ! 33 irq1
.long do_IRQ ! 34 irq2
@@ -147,6 +151,51 @@
.long do_IRQ ! 62 PCC pcc0i
.long do_IRQ ! 63 pcc1i /* 9E0 */
#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+ .long exception_none ! 61 /* 9A0 */
+ .long exception_none ! 62
+ .long exception_none ! 63
+ .long exception_none ! 64 /* A00 */
+ .long exception_none ! 65
+ .long exception_none ! 66
+ .long exception_none ! 67
+ .long exception_none ! 68
+ .long exception_none ! 69
+ .long exception_none ! 70
+ .long exception_none ! 71
+ .long exception_none ! 72 /* B00 */
+ .long exception_none ! 73
+ .long exception_none ! 74
+ .long exception_none ! 75
+ .long do_IRQ ! 76 DMAC2 dei4 /* B80 */
+ .long do_IRQ ! 77 DMAC2 dei5
+ .long exception_none ! 78
+ .long do_IRQ ! 79 IPSEC ipseci /* BE0 */
+ .long do_IRQ ! 80 EDMAC eint0 /* C00 */
+ .long do_IRQ ! 81 EDMAC eint1
+ .long do_IRQ ! 82 EDMAC eint2
+ .long exception_none ! 83 /* C60 */
+ .long exception_none ! 84
+ .long exception_none ! 85
+ .long exception_none ! 86
+ .long exception_none ! 87
+ .long exception_none ! 88 /* D00 */
+ .long exception_none ! 89
+ .long exception_none ! 90
+ .long exception_none ! 91
+ .long exception_none ! 92
+ .long exception_none ! 93
+ .long exception_none ! 94
+ .long exception_none ! 95
+ .long do_IRQ ! 96 SIOF eri0 /* E00 */
+ .long do_IRQ ! 97 txi0
+ .long do_IRQ ! 98 rxi0
+ .long do_IRQ ! 99 cci0
+ .long do_IRQ ! 100 eri1 /* E80 */
+ .long do_IRQ ! 101 txi1
+ .long do_IRQ ! 102 rxi2
+ .long do_IRQ ! 103 cci3
+#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7300)
.long do_IRQ ! 64
.long do_IRQ ! 65
@@ -195,4 +244,3 @@
.long do_IRQ ! 108
#endif
#endif
-
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index 5cdc886..e670988 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -72,6 +72,12 @@
cpu_data->dcache.sets = 256;
cpu_data->type = CPU_SH7729;
+#if defined(CONFIG_CPU_SUBTYPE_SH7706)
+ cpu_data->type = CPU_SH7706;
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+ cpu_data->type = CPU_SH7710;
+#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
cpu_data->type = CPU_SH7705;
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7300.c b/arch/sh/kernel/cpu/sh3/setup-sh7300.c
new file mode 100644
index 0000000..ab4d204
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7300.c
@@ -0,0 +1,43 @@
+/*
+ * SH7300 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xa4430000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCI,
+ .irqs = { 80, 80, 80, 80 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7300_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7300_devices_setup(void)
+{
+ return platform_add_devices(sh7300_devices,
+ ARRAY_SIZE(sh7300_devices));
+}
+__initcall(sh7300_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
new file mode 100644
index 0000000..a8e41c5
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -0,0 +1,48 @@
+/*
+ * SH7705 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xa4400000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 52, 53, 55, 54 },
+ }, {
+ .mapbase = 0xa4410000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 56, 57, 59, 58 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7705_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7705_devices_setup(void)
+{
+ return platform_add_devices(sh7705_devices,
+ ARRAY_SIZE(sh7705_devices));
+}
+__initcall(sh7705_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7708.c b/arch/sh/kernel/cpu/sh3/setup-sh7708.c
new file mode 100644
index 0000000..f933723
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7708.c
@@ -0,0 +1,43 @@
+/*
+ * SH7708 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xfffffe80,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCI,
+ .irqs = { 23, 24, 25, 0 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7708_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7708_devices_setup(void)
+{
+ return platform_add_devices(sh7708_devices,
+ ARRAY_SIZE(sh7708_devices));
+}
+__initcall(sh7708_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
new file mode 100644
index 0000000..ff43ef2
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
@@ -0,0 +1,53 @@
+/*
+ * SH7707/SH7709 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xfffffe80,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCI,
+ .irqs = { 23, 24, 25, 0 },
+ }, {
+ .mapbase = 0xa4000150,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 56, 57, 59, 58 },
+ }, {
+ .mapbase = 0xa4000140,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_IRDA,
+ .irqs = { 52, 53, 55, 54 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7709_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7709_devices_setup(void)
+{
+ return platform_add_devices(sh7709_devices,
+ ARRAY_SIZE(sh7709_devices));
+}
+__initcall(sh7709_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
new file mode 100644
index 0000000..895f99e
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -0,0 +1,43 @@
+/*
+ * SH7710 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xa4400000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 52, 53, 55, 54 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7710_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7710_devices_setup(void)
+{
+ return platform_add_devices(sh7710_devices,
+ ARRAY_SIZE(sh7710_devices));
+}
+__initcall(sh7710_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 3d5cafc..8dbf389 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -7,6 +7,16 @@
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
+# CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7751) += setup-sh7750.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7760) += setup-sh7760.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
+obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
+obj-$(CONFIG_CPU_SUBTYPE_SH4_202) += setup-sh4-202.o
+
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH4) := clock-sh4.o
clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
diff --git a/arch/sh/kernel/cpu/sh4/ex.S b/arch/sh/kernel/cpu/sh4/ex.S
index 26a27df..7146893 100644
--- a/arch/sh/kernel/cpu/sh4/ex.S
+++ b/arch/sh/kernel/cpu/sh4/ex.S
@@ -72,6 +72,7 @@
.long do_IRQ ! 1110
.long exception_error
! Internal hardware
+#ifndef CONFIG_CPU_SUBTYPE_SH7780
.long do_IRQ ! TMU0 tuni0 /* 400 */
.long do_IRQ ! TMU1 tuni1
.long do_IRQ ! TMU2 tuni2
@@ -122,6 +123,13 @@
.long do_IRQ ! 45 dmte5
.long do_IRQ ! 46 dmte6
.long do_IRQ ! 47 dmte7 /* 7E0 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
+ .long do_IRQ ! 44 IIC1 ali /* 780 */
+ .long do_IRQ ! 45 tacki
+ .long do_IRQ ! 46 waiti
+ .long do_IRQ ! 47 dtei /* 7E0 */
+ .long do_IRQ ! 48 DMAC dei0 /* 800 */
+ .long do_IRQ ! 49 dei1 /* 820 */
#else
.long exception_error ! 44 /* 780 */
.long exception_error ! 45
@@ -131,7 +139,8 @@
#if defined(CONFIG_SH_FPU)
.long do_fpu_state_restore ! 48 /* 800 */
.long do_fpu_state_restore ! 49 /* 820 */
-#else
+#elif !defined(CONFIG_CPU_SUBTYPE_SH7343) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH73180)
.long exception_error
.long exception_error
#endif
@@ -224,7 +233,7 @@
.long exception_error
.long do_IRQ ! ADC adi
.long do_IRQ ! CMT cmti /* FA0 */
-#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7343)
.long do_IRQ ! 50 0x840
.long do_IRQ ! 51 0x860
.long do_IRQ ! 52 0x880
@@ -379,5 +388,168 @@
.long exception_error ! 141 0x13a0
.long exception_error ! 142 0x13c0
.long exception_error ! 143 0x13e0
+#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
+ .long do_IRQ ! 50 0x840
+ .long do_IRQ ! 51 0x860
+ .long do_IRQ ! 52 0x880
+ .long do_IRQ ! 53 0x8a0
+ .long do_IRQ ! 54 0x8c0
+ .long do_IRQ ! 55 0x8e0
+ .long do_IRQ ! 56 0x900
+ .long do_IRQ ! 57 0x920
+ .long do_IRQ ! 58 0x940
+ .long do_IRQ ! 59 0x960
+ .long do_IRQ ! 60 0x980
+ .long do_IRQ ! 61 0x9a0
+ .long do_IRQ ! 62 0x9c0
+ .long do_IRQ ! 63 0x9e0
+ .long do_IRQ ! 64 0xa00
+ .long do_IRQ ! 65 0xa20
+ .long do_IRQ ! 66 0xa4d
+ .long do_IRQ ! 67 0xa60
+ .long do_IRQ ! 68 0xa80
+ .long do_IRQ ! 69 0xaa0
+ .long do_IRQ ! 70 0xac0
+ .long do_IRQ ! 71 0xae0
+ .long do_IRQ ! 72 0xb00
+ .long do_IRQ ! 73 0xb20
+ .long do_IRQ ! 74 0xb40
+ .long do_IRQ ! 75 0xb60
+ .long do_IRQ ! 76 0xb80
+ .long do_IRQ ! 77 0xba0
+ .long do_IRQ ! 78 0xbc0
+ .long do_IRQ ! 79 0xbe0
+ .long do_IRQ ! 80 0xc00
+ .long do_IRQ ! 81 0xc20
+ .long do_IRQ ! 82 0xc40
+ .long do_IRQ ! 83 0xc60
+ .long do_IRQ ! 84 0xc80
+ .long do_IRQ ! 85 0xca0
+ .long do_IRQ ! 86 0xcc0
+ .long do_IRQ ! 87 0xce0
+ .long do_IRQ ! 88 0xd00
+ .long do_IRQ ! 89 0xd20
+ .long do_IRQ ! 90 0xd40
+ .long do_IRQ ! 91 0xd60
+ .long do_IRQ ! 92 0xd80
+ .long do_IRQ ! 93 0xda0
+ .long do_IRQ ! 94 0xdc0
+ .long do_IRQ ! 95 0xde0
+ .long do_IRQ ! 96 0xe00
+ .long do_IRQ ! 97 0xe20
+ .long do_IRQ ! 98 0xe40
+ .long do_IRQ ! 99 0xe60
+ .long do_IRQ ! 100 0xe80
+ .long do_IRQ ! 101 0xea0
+ .long do_IRQ ! 102 0xec0
+ .long do_IRQ ! 103 0xee0
+ .long do_IRQ ! 104 0xf00
+ .long do_IRQ ! 105 0xf20
+ .long do_IRQ ! 106 0xf40
+ .long do_IRQ ! 107 0xf60
+ .long do_IRQ ! 108 0xf80
+#endif
+#else
+ .long exception_error /* 400 */
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! RTC ati
+ .long do_IRQ ! pri
+ .long do_IRQ ! cui
+ .long exception_error
+ .long exception_error /* 500 */
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! WDT iti /* 560 */
+ .long do_IRQ ! TMU-ch0
+ .long do_IRQ ! TMU-ch1
+ .long do_IRQ ! TMU-ch2
+ .long do_IRQ ! ticpi2 /* 5E0 */
+ .long do_IRQ ! 32 Hitachi UDI /* 600 */
+ .long exception_error
+ .long do_IRQ ! 34 DMAC dmte0
+ .long do_IRQ ! 35 dmte1
+ .long do_IRQ ! 36 dmte2
+ .long do_IRQ ! 37 dmte3
+ .long do_IRQ ! 38 dmae
+ .long exception_error ! 39 /* 6E0 */
+ .long do_IRQ ! 40 SCIF-ch0 eri /* 700 */
+ .long do_IRQ ! 41 rxi
+ .long do_IRQ ! 42 bri
+ .long do_IRQ ! 43 txi
+ .long do_IRQ ! 44 DMAC dmte4 /* 780 */
+ .long do_IRQ ! 45 dmte5
+ .long do_IRQ ! 46 dmte6
+ .long do_IRQ ! 47 dmte7 /* 7E0 */
+#if defined(CONFIG_SH_FPU)
+ .long do_fpu_state_restore ! 48 /* 800 */
+ .long do_fpu_state_restore ! 49 /* 820 */
+#else
+ .long exception_error
+ .long exception_error
+#endif
+ .long exception_error /* 840 */
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! 56 CMT /* 900 */
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! 60 HAC
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! PCI serr /* A00 */
+ .long do_IRQ ! INTA
+ .long do_IRQ ! INTB
+ .long do_IRQ ! INTC
+ .long do_IRQ ! INTD
+ .long do_IRQ ! err
+ .long do_IRQ ! pwd3
+ .long do_IRQ ! pwd2
+ .long do_IRQ ! pwd1 /* B00 */
+ .long do_IRQ ! pwd0
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! SCIF-ch1 eri /* B80 */
+ .long do_IRQ ! rxi
+ .long do_IRQ ! bri
+ .long do_IRQ ! txi
+ .long do_IRQ ! SIOF /* C00 */
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! HSPI /* C80 */
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! MMCIF fatat /* D00 */
+ .long do_IRQ ! tran
+ .long do_IRQ ! err
+ .long do_IRQ ! frdy
+ .long do_IRQ ! DMAC dmint8 /* D80 */
+ .long do_IRQ ! dmint9
+ .long do_IRQ ! dmint10
+ .long do_IRQ ! dmint11
+ .long do_IRQ ! TMU-ch3 /* E00 */
+ .long do_IRQ ! TMU-ch4
+ .long do_IRQ ! TMU-ch5
+ .long exception_error
+ .long do_IRQ ! SSI
+ .long exception_error
+ .long exception_error
+ .long exception_error
+ .long do_IRQ ! FLCTL flste /* F00 */
+ .long do_IRQ ! fltend
+ .long do_IRQ ! fltrq0
+ .long do_IRQ ! fltrq1
+ .long do_IRQ ! GPIO gpioi0 /* F80 */
+ .long do_IRQ ! gpioi1
+ .long do_IRQ ! gpioi2
+ .long do_IRQ ! gpioi3
#endif
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 42427b7..c294de1 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -3,7 +3,7 @@
*
* CPU Subtype Probing for SH-4.
*
- * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2001 - 2006 Paul Mundt
* Copyright (C) 2003 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -29,7 +29,7 @@
[9] = (1 << 16)
};
- pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffff;
+ pvr = (ctrl_inl(CCN_PVR) >> 8) & 0xffffff;
prr = (ctrl_inl(CCN_PRR) >> 4) & 0xff;
cvr = (ctrl_inl(CCN_CVR));
@@ -38,7 +38,6 @@
*/
cpu_data->icache.way_incr = (1 << 13);
cpu_data->icache.entry_shift = 5;
- cpu_data->icache.entry_mask = 0x1fe0;
cpu_data->icache.sets = 256;
cpu_data->icache.ways = 1;
cpu_data->icache.linesz = L1_CACHE_BYTES;
@@ -48,13 +47,29 @@
*/
cpu_data->dcache.way_incr = (1 << 14);
cpu_data->dcache.entry_shift = 5;
- cpu_data->dcache.entry_mask = 0x3fe0;
cpu_data->dcache.sets = 512;
cpu_data->dcache.ways = 1;
cpu_data->dcache.linesz = L1_CACHE_BYTES;
- /* Set the FPU flag, virtually all SH-4's have one */
- cpu_data->flags |= CPU_HAS_FPU;
+ /*
+ * Setup some generic flags we can probe
+ * (L2 and DSP detection only work on SH-4A)
+ */
+ if (((pvr >> 16) & 0xff) == 0x10) {
+ if ((cvr & 0x02000000) == 0)
+ cpu_data->flags |= CPU_HAS_L2_CACHE;
+ if ((cvr & 0x10000000) == 0)
+ cpu_data->flags |= CPU_HAS_DSP;
+
+ cpu_data->flags |= CPU_HAS_LLSC;
+ }
+
+ /* FPU detection works for everyone */
+ if ((cvr & 0x20000000) == 1)
+ cpu_data->flags |= CPU_HAS_FPU;
+
+ /* Mask off the upper chip ID */
+ pvr &= 0xffff;
/*
* Probe the underlying processor version/revision and
@@ -63,56 +78,101 @@
switch (pvr) {
case 0x205:
cpu_data->type = CPU_SH7750;
- cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER;
+ cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
+ CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
break;
case 0x206:
cpu_data->type = CPU_SH7750S;
- cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_PERF_COUNTER;
+ cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
+ CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA;
break;
case 0x1100:
cpu_data->type = CPU_SH7751;
+ cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
break;
case 0x2000:
cpu_data->type = CPU_SH73180;
cpu_data->icache.ways = 4;
cpu_data->dcache.ways = 4;
- cpu_data->flags &= ~CPU_HAS_FPU;
+ cpu_data->flags |= CPU_HAS_LLSC;
+ break;
+ case 0x2001:
+ case 0x2004:
+ cpu_data->type = CPU_SH7770;
+ cpu_data->icache.ways = 4;
+ cpu_data->dcache.ways = 4;
+
+ cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_LLSC;
+ break;
+ case 0x2006:
+ case 0x200A:
+ if (prr == 0x61)
+ cpu_data->type = CPU_SH7781;
+ else
+ cpu_data->type = CPU_SH7780;
+
+ cpu_data->icache.ways = 4;
+ cpu_data->dcache.ways = 4;
+
+ cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ CPU_HAS_LLSC;
+ break;
+ case 0x3000:
+ case 0x3003:
+ cpu_data->type = CPU_SH7343;
+ cpu_data->icache.ways = 4;
+ cpu_data->dcache.ways = 4;
+ cpu_data->flags |= CPU_HAS_LLSC;
break;
case 0x8000:
cpu_data->type = CPU_ST40RA;
+ cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
break;
case 0x8100:
cpu_data->type = CPU_ST40GX1;
+ cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
break;
case 0x700:
cpu_data->type = CPU_SH4_501;
cpu_data->icache.ways = 2;
cpu_data->dcache.ways = 2;
-
- /* No FPU on the SH4-500 series.. */
- cpu_data->flags &= ~CPU_HAS_FPU;
+ cpu_data->flags |= CPU_HAS_PTEA;
break;
case 0x600:
cpu_data->type = CPU_SH4_202;
cpu_data->icache.ways = 2;
cpu_data->dcache.ways = 2;
+ cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
break;
case 0x500 ... 0x501:
switch (prr) {
- case 0x10: cpu_data->type = CPU_SH7750R; break;
- case 0x11: cpu_data->type = CPU_SH7751R; break;
- case 0x50: cpu_data->type = CPU_SH7760; break;
+ case 0x10:
+ cpu_data->type = CPU_SH7750R;
+ break;
+ case 0x11:
+ cpu_data->type = CPU_SH7751R;
+ break;
+ case 0x50 ... 0x5f:
+ cpu_data->type = CPU_SH7760;
+ break;
}
cpu_data->icache.ways = 2;
cpu_data->dcache.ways = 2;
+ cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA;
+
break;
default:
cpu_data->type = CPU_SH_NONE;
break;
}
+#ifdef CONFIG_SH_DIRECT_MAPPED
+ cpu_data->icache.ways = 1;
+ cpu_data->dcache.ways = 1;
+#endif
+
/*
* On anything that's not a direct-mapped cache, look to the CVR
* for I/D-cache specifics.
@@ -121,18 +181,56 @@
size = sizes[(cvr >> 20) & 0xf];
cpu_data->icache.way_incr = (size >> 1);
cpu_data->icache.sets = (size >> 6);
- cpu_data->icache.entry_mask =
- (cpu_data->icache.way_incr - (1 << 5));
+
}
+ /* Setup the rest of the I-cache info */
+ cpu_data->icache.entry_mask = cpu_data->icache.way_incr -
+ cpu_data->icache.linesz;
+
+ cpu_data->icache.way_size = cpu_data->icache.sets *
+ cpu_data->icache.linesz;
+
+ /* And the rest of the D-cache */
if (cpu_data->dcache.ways > 1) {
size = sizes[(cvr >> 16) & 0xf];
cpu_data->dcache.way_incr = (size >> 1);
cpu_data->dcache.sets = (size >> 6);
- cpu_data->dcache.entry_mask =
- (cpu_data->dcache.way_incr - (1 << 5));
+ }
+
+ cpu_data->dcache.entry_mask = cpu_data->dcache.way_incr -
+ cpu_data->dcache.linesz;
+
+ cpu_data->dcache.way_size = cpu_data->dcache.sets *
+ cpu_data->dcache.linesz;
+
+ /*
+ * Setup the L2 cache desc
+ *
+ * SH-4A's have an optional PIPT L2.
+ */
+ if (cpu_data->flags & CPU_HAS_L2_CACHE) {
+ /*
+ * Size calculation is much more sensible
+ * than it is for the L1.
+ *
+ * Sizes are 128KB, 258KB, 512KB, and 1MB.
+ */
+ size = (cvr & 0xf) << 17;
+
+ BUG_ON(!size);
+
+ cpu_data->scache.way_incr = (1 << 16);
+ cpu_data->scache.entry_shift = 5;
+ cpu_data->scache.ways = 4;
+ cpu_data->scache.linesz = L1_CACHE_BYTES;
+ cpu_data->scache.entry_mask =
+ (cpu_data->scache.way_incr - cpu_data->scache.linesz);
+ cpu_data->scache.sets = size /
+ (cpu_data->scache.linesz * cpu_data->scache.ways);
+ cpu_data->scache.way_size =
+ (cpu_data->scache.sets * cpu_data->scache.linesz);
}
return 0;
}
-
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
new file mode 100644
index 0000000..6e4e965
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -0,0 +1,43 @@
+/*
+ * SH4-202 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 40, 41, 43, 42 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh4202_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh4202_devices_setup(void)
+{
+ return platform_add_devices(sh4202_devices,
+ ARRAY_SIZE(sh4202_devices));
+}
+__initcall(sh4202_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh73180.c b/arch/sh/kernel/cpu/sh4/setup-sh73180.c
new file mode 100644
index 0000000..cc9ea1e
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh73180.c
@@ -0,0 +1,43 @@
+/*
+ * SH73180 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 81, 83, 82 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh73180_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh73180_devices_setup(void)
+{
+ return platform_add_devices(sh73180_devices,
+ ARRAY_SIZE(sh73180_devices));
+}
+__initcall(sh73180_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7343.c b/arch/sh/kernel/cpu/sh4/setup-sh7343.c
new file mode 100644
index 0000000..91d61cf
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7343.c
@@ -0,0 +1,43 @@
+/*
+ * SH7343 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 81, 83, 82 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7343_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7343_devices_setup(void)
+{
+ return platform_add_devices(sh7343_devices,
+ ARRAY_SIZE(sh7343_devices));
+}
+__initcall(sh7343_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
new file mode 100644
index 0000000..50812d5
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -0,0 +1,48 @@
+/*
+ * SH7750/SH7751 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCI,
+ .irqs = { 23, 24, 25, 0 },
+ }, {
+ .mapbase = 0xffe80000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 40, 41, 43, 42 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7750_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7750_devices_setup(void)
+{
+ return platform_add_devices(sh7750_devices,
+ ARRAY_SIZE(sh7750_devices));
+}
+__initcall(sh7750_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
new file mode 100644
index 0000000..97f1c9a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -0,0 +1,53 @@
+/*
+ * SH7760 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xfe600000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 52, 53, 55, 54 },
+ }, {
+ .mapbase = 0xfe610000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 72, 73, 75, 74 },
+ }, {
+ .mapbase = 0xfe620000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 76, 77, 79, 78 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7760_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7760_devices_setup(void)
+{
+ return platform_add_devices(sh7760_devices,
+ ARRAY_SIZE(sh7760_devices));
+}
+__initcall(sh7760_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7770.c b/arch/sh/kernel/cpu/sh4/setup-sh7770.c
new file mode 100644
index 0000000..6a04cc5
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7770.c
@@ -0,0 +1,53 @@
+/*
+ * SH7770 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xff923000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 61, 61, 61, 61 },
+ }, {
+ .mapbase = 0xff924000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 62, 62, 62, 62 },
+ }, {
+ .mapbase = 0xff925000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 63, 63, 63, 63 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7770_devices[] __initdata = {
+ &sci_device,
+};
+
+static int __init sh7770_devices_setup(void)
+{
+ return platform_add_devices(sh7770_devices,
+ ARRAY_SIZE(sh7770_devices));
+}
+__initcall(sh7770_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c
new file mode 100644
index 0000000..72493f2
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c
@@ -0,0 +1,79 @@
+/*
+ * SH7780 Setup
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xffe80000,
+ .end = 0xffe80000 + 0x58 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = 23,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 40, 41, 43, 42 },
+ }, {
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 76, 77, 79, 78 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh7780_devices[] __initdata = {
+ &rtc_device,
+ &sci_device,
+};
+
+static int __init sh7780_devices_setup(void)
+{
+ return platform_add_devices(sh7780_devices,
+ ARRAY_SIZE(sh7780_devices));
+}
+__initcall(sh7780_devices_setup);
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index b09805f..7bcc73f 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -1,49 +1,52 @@
/*
- * arch/sh/kernel/cpu/sq.c
+ * arch/sh/kernel/cpu/sh4/sq.c
*
* General management API for SH-4 integrated Store Queues
*
- * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2001 - 2006 Paul Mundt
* Copyright (C) 2001, 2002 M. R. Brown
*
- * Some of this code has been adopted directly from the old arch/sh/mm/sq.c
- * hack that was part of the LinuxDC project. For all intents and purposes,
- * this is a completely new interface that really doesn't have much in common
- * with the old zone-based approach at all. In fact, it's only listed here for
- * general completeness.
- *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/bitmap.h>
+#include <linux/sysdev.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
#include <linux/vmalloc.h>
-
+#include <linux/mm.h>
#include <asm/io.h>
#include <asm/page.h>
-#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
#include <asm/cpu/sq.h>
-static LIST_HEAD(sq_mapping_list);
-static DEFINE_SPINLOCK(sq_mapping_lock);
+struct sq_mapping;
-/**
- * sq_flush - Flush (prefetch) the store queue cache
- * @addr: the store queue address to flush
- *
- * Executes a prefetch instruction on the specified store queue cache,
- * so that the cached data is written to physical memory.
- */
-inline void sq_flush(void *addr)
-{
- __asm__ __volatile__ ("pref @%0" : : "r" (addr) : "memory");
-}
+struct sq_mapping {
+ const char *name;
+
+ unsigned long sq_addr;
+ unsigned long addr;
+ unsigned int size;
+
+ struct sq_mapping *next;
+};
+
+static struct sq_mapping *sq_mapping_list;
+static DEFINE_SPINLOCK(sq_mapping_lock);
+static kmem_cache_t *sq_cache;
+static unsigned long *sq_bitmap;
+
+#define store_queue_barrier() \
+do { \
+ (void)ctrl_inl(P4SEG_STORE_QUE); \
+ ctrl_outl(0, P4SEG_STORE_QUE + 0); \
+ ctrl_outl(0, P4SEG_STORE_QUE + 8); \
+} while (0);
/**
* sq_flush_range - Flush (prefetch) a specific SQ range
@@ -56,152 +59,73 @@
void sq_flush_range(unsigned long start, unsigned int len)
{
volatile unsigned long *sq = (unsigned long *)start;
- unsigned long dummy;
/* Flush the queues */
for (len >>= 5; len--; sq += 8)
- sq_flush((void *)sq);
+ prefetchw((void *)sq);
/* Wait for completion */
- dummy = ctrl_inl(P4SEG_STORE_QUE);
-
- ctrl_outl(0, P4SEG_STORE_QUE + 0);
- ctrl_outl(0, P4SEG_STORE_QUE + 8);
+ store_queue_barrier();
}
-static struct sq_mapping *__sq_alloc_mapping(unsigned long virt, unsigned long phys, unsigned long size, const char *name)
+static inline void sq_mapping_list_add(struct sq_mapping *map)
{
- struct sq_mapping *map;
+ struct sq_mapping **p, *tmp;
- if (virt + size > SQ_ADDRMAX)
- return ERR_PTR(-ENOSPC);
+ spin_lock_irq(&sq_mapping_lock);
- map = kmalloc(sizeof(struct sq_mapping), GFP_KERNEL);
- if (!map)
- return ERR_PTR(-ENOMEM);
+ p = &sq_mapping_list;
+ while ((tmp = *p) != NULL)
+ p = &tmp->next;
- INIT_LIST_HEAD(&map->list);
+ map->next = tmp;
+ *p = map;
- map->sq_addr = virt;
- map->addr = phys;
- map->size = size + 1;
- map->name = name;
-
- list_add(&map->list, &sq_mapping_list);
-
- return map;
+ spin_unlock_irq(&sq_mapping_lock);
}
-static unsigned long __sq_get_next_addr(void)
+static inline void sq_mapping_list_del(struct sq_mapping *map)
{
- if (!list_empty(&sq_mapping_list)) {
- struct list_head *pos, *tmp;
+ struct sq_mapping **p, *tmp;
- /*
- * Read one off the list head, as it will have the highest
- * mapped allocation. Set the next one up right above it.
- *
- * This is somewhat sub-optimal, as we don't look at
- * gaps between allocations or anything lower then the
- * highest-level allocation.
- *
- * However, in the interest of performance and the general
- * lack of desire to do constant list rebalancing, we don't
- * worry about it.
- */
- list_for_each_safe(pos, tmp, &sq_mapping_list) {
- struct sq_mapping *entry;
+ spin_lock_irq(&sq_mapping_lock);
- entry = list_entry(pos, typeof(*entry), list);
-
- return entry->sq_addr + entry->size;
+ for (p = &sq_mapping_list; (tmp = *p); p = &tmp->next)
+ if (tmp == map) {
+ *p = tmp->next;
+ break;
}
- }
- return P4SEG_STORE_QUE;
+ spin_unlock_irq(&sq_mapping_lock);
}
-/**
- * __sq_remap - Perform a translation from the SQ to a phys addr
- * @map: sq mapping containing phys and store queue addresses.
- *
- * Maps the store queue address specified in the mapping to the physical
- * address specified in the mapping.
- */
-static struct sq_mapping *__sq_remap(struct sq_mapping *map)
+static int __sq_remap(struct sq_mapping *map, unsigned long flags)
{
- unsigned long flags, pteh, ptel;
+#if defined(CONFIG_MMU)
struct vm_struct *vma;
- pgprot_t pgprot;
+ vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX);
+ if (!vma)
+ return -ENOMEM;
+
+ vma->phys_addr = map->addr;
+
+ if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr,
+ map->size, flags)) {
+ vunmap(vma->addr);
+ return -EAGAIN;
+ }
+#else
/*
* Without an MMU (or with it turned off), this is much more
* straightforward, as we can just load up each queue's QACR with
* the physical address appropriately masked.
*/
-
ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR0);
ctrl_outl(((map->addr >> 26) << 2) & 0x1c, SQ_QACR1);
+#endif
-#ifdef CONFIG_MMU
- /*
- * With an MMU on the other hand, things are slightly more involved.
- * Namely, we have to have a direct mapping between the SQ addr and
- * the associated physical address in the UTLB by way of setting up
- * a virt<->phys translation by hand. We do this by simply specifying
- * the SQ addr in UTLB.VPN and the associated physical address in
- * UTLB.PPN.
- *
- * Notably, even though this is a special case translation, and some
- * of the configuration bits are meaningless, we're still required
- * to have a valid ASID context in PTEH.
- *
- * We could also probably get by without explicitly setting PTEA, but
- * we do it here just for good measure.
- */
- spin_lock_irqsave(&sq_mapping_lock, flags);
-
- pteh = map->sq_addr;
- ctrl_outl((pteh & MMU_VPN_MASK) | get_asid(), MMU_PTEH);
-
- ptel = map->addr & PAGE_MASK;
- ctrl_outl(((ptel >> 28) & 0xe) | (ptel & 0x1), MMU_PTEA);
-
- pgprot = pgprot_noncached(PAGE_KERNEL);
-
- ptel &= _PAGE_FLAGS_HARDWARE_MASK;
- ptel |= pgprot_val(pgprot);
- ctrl_outl(ptel, MMU_PTEL);
-
- __asm__ __volatile__ ("ldtlb" : : : "memory");
-
- spin_unlock_irqrestore(&sq_mapping_lock, flags);
-
- /*
- * Next, we need to map ourselves in the kernel page table, so that
- * future accesses after a TLB flush will be handled when we take a
- * page fault.
- *
- * Theoretically we could just do this directly and not worry about
- * setting up the translation by hand ahead of time, but for the
- * cases where we want a one-shot SQ mapping followed by a quick
- * writeout before we hit the TLB flush, we do it anyways. This way
- * we at least save ourselves the initial page fault overhead.
- */
- vma = __get_vm_area(map->size, VM_ALLOC, map->sq_addr, SQ_ADDRMAX);
- if (!vma)
- return ERR_PTR(-ENOMEM);
-
- vma->phys_addr = map->addr;
-
- if (remap_area_pages((unsigned long)vma->addr, vma->phys_addr,
- map->size, pgprot_val(pgprot))) {
- vunmap(vma->addr);
- return NULL;
- }
-#endif /* CONFIG_MMU */
-
- return map;
+ return 0;
}
/**
@@ -209,42 +133,65 @@
* @phys: Physical address of mapping.
* @size: Length of mapping.
* @name: User invoking mapping.
+ * @flags: Protection flags.
*
* Remaps the physical address @phys through the next available store queue
* address of @size length. @name is logged at boot time as well as through
- * the procfs interface.
- *
- * A pre-allocated and filled sq_mapping pointer is returned, and must be
- * cleaned up with a call to sq_unmap() when the user is done with the
- * mapping.
+ * the sysfs interface.
*/
-struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name)
+unsigned long sq_remap(unsigned long phys, unsigned int size,
+ const char *name, unsigned long flags)
{
struct sq_mapping *map;
- unsigned long virt, end;
+ unsigned long end;
unsigned int psz;
+ int ret, page;
/* Don't allow wraparound or zero size */
end = phys + size - 1;
- if (!size || end < phys)
- return NULL;
+ if (unlikely(!size || end < phys))
+ return -EINVAL;
/* Don't allow anyone to remap normal memory.. */
- if (phys < virt_to_phys(high_memory))
- return NULL;
+ if (unlikely(phys < virt_to_phys(high_memory)))
+ return -EINVAL;
phys &= PAGE_MASK;
+ size = PAGE_ALIGN(end + 1) - phys;
- size = PAGE_ALIGN(end + 1) - phys;
- virt = __sq_get_next_addr();
- psz = (size + (PAGE_SIZE - 1)) / PAGE_SIZE;
- map = __sq_alloc_mapping(virt, phys, size, name);
+ map = kmem_cache_alloc(sq_cache, GFP_KERNEL);
+ if (unlikely(!map))
+ return -ENOMEM;
- printk("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n",
- map->name ? map->name : "???",
- psz, psz == 1 ? " " : "s",
- map->sq_addr, map->addr);
+ map->addr = phys;
+ map->size = size;
+ map->name = name;
- return __sq_remap(map);
+ page = bitmap_find_free_region(sq_bitmap, 0x04000000,
+ get_order(map->size));
+ if (unlikely(page < 0)) {
+ ret = -ENOSPC;
+ goto out;
+ }
+
+ map->sq_addr = P4SEG_STORE_QUE + (page << PAGE_SHIFT);
+
+ ret = __sq_remap(map, flags);
+ if (unlikely(ret != 0))
+ goto out;
+
+ psz = (size + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+ pr_info("sqremap: %15s [%4d page%s] va 0x%08lx pa 0x%08lx\n",
+ likely(map->name) ? map->name : "???",
+ psz, psz == 1 ? " " : "s",
+ map->sq_addr, map->addr);
+
+ sq_mapping_list_add(map);
+
+ return map->sq_addr;
+
+out:
+ kmem_cache_free(sq_cache, map);
+ return ret;
}
/**
@@ -255,188 +202,198 @@
* sq_remap(). Also frees up the pte that was previously inserted into
* the kernel page table and discards the UTLB translation.
*/
-void sq_unmap(struct sq_mapping *map)
+void sq_unmap(unsigned long vaddr)
{
- if (map->sq_addr > (unsigned long)high_memory)
- vfree((void *)(map->sq_addr & PAGE_MASK));
+ struct sq_mapping **p, *map;
+ struct vm_struct *vma;
+ int page;
- list_del(&map->list);
- kfree(map);
-}
+ for (p = &sq_mapping_list; (map = *p); p = &map->next)
+ if (map->sq_addr == vaddr)
+ break;
-/**
- * sq_clear - Clear a store queue range
- * @addr: Address to start clearing from.
- * @len: Length to clear.
- *
- * A quick zero-fill implementation for clearing out memory that has been
- * remapped through the store queues.
- */
-void sq_clear(unsigned long addr, unsigned int len)
-{
- int i;
-
- /* Clear out both queues linearly */
- for (i = 0; i < 8; i++) {
- ctrl_outl(0, addr + i + 0);
- ctrl_outl(0, addr + i + 8);
+ if (unlikely(!map)) {
+ printk("%s: bad store queue address 0x%08lx\n",
+ __FUNCTION__, vaddr);
+ return;
}
- sq_flush_range(addr, len);
-}
+ page = (map->sq_addr - P4SEG_STORE_QUE) >> PAGE_SHIFT;
+ bitmap_release_region(sq_bitmap, page, get_order(map->size));
-/**
- * sq_vma_unmap - Unmap a VMA range
- * @area: VMA containing range.
- * @addr: Start of range.
- * @len: Length of range.
- *
- * Searches the sq_mapping_list for a mapping matching the sq addr @addr,
- * and subsequently frees up the entry. Further cleanup is done by generic
- * code.
- */
-static void sq_vma_unmap(struct vm_area_struct *area,
- unsigned long addr, size_t len)
-{
- struct list_head *pos, *tmp;
-
- list_for_each_safe(pos, tmp, &sq_mapping_list) {
- struct sq_mapping *entry;
-
- entry = list_entry(pos, typeof(*entry), list);
-
- if (entry->sq_addr == addr) {
- /*
- * We could probably get away without doing the tlb flush
- * here, as generic code should take care of most of this
- * when unmapping the rest of the VMA range for us. Leave
- * it in for added sanity for the time being..
- */
- __flush_tlb_page(get_asid(), entry->sq_addr & PAGE_MASK);
-
- list_del(&entry->list);
- kfree(entry);
-
- return;
- }
+#ifdef CONFIG_MMU
+ vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
+ if (!vma) {
+ printk(KERN_ERR "%s: bad address 0x%08lx\n",
+ __FUNCTION__, map->sq_addr);
+ return;
}
+#endif
+
+ sq_mapping_list_del(map);
+
+ kmem_cache_free(sq_cache, map);
}
-/**
- * sq_vma_sync - Sync a VMA range
- * @area: VMA containing range.
- * @start: Start of range.
- * @len: Length of range.
- * @flags: Additional flags.
+/*
+ * Needlessly complex sysfs interface. Unfortunately it doesn't seem like
+ * there is any other easy way to add things on a per-cpu basis without
+ * putting the directory entries somewhere stupid and having to create
+ * links in sysfs by hand back in to the per-cpu directories.
*
- * Synchronizes an sq mapped range by flushing the store queue cache for
- * the duration of the mapping.
- *
- * Used internally for user mappings, which must use msync() to prefetch
- * the store queue cache.
+ * Some day we may want to have an additional abstraction per store
+ * queue, but considering the kobject hell we already have to deal with,
+ * it's simply not worth the trouble.
*/
-static int sq_vma_sync(struct vm_area_struct *area,
- unsigned long start, size_t len, unsigned int flags)
-{
- sq_flush_range(start, len);
+static struct kobject *sq_kobject[NR_CPUS];
- return 0;
-}
-
-static struct vm_operations_struct sq_vma_ops = {
- .unmap = sq_vma_unmap,
- .sync = sq_vma_sync,
+struct sq_sysfs_attr {
+ struct attribute attr;
+ ssize_t (*show)(char *buf);
+ ssize_t (*store)(const char *buf, size_t count);
};
-/**
- * sq_mmap - mmap() for /dev/cpu/sq
- * @file: unused.
- * @vma: VMA to remap.
- *
- * Remap the specified vma @vma through the store queues, and setup associated
- * information for the new mapping. Also build up the page tables for the new
- * area.
- */
-static int sq_mmap(struct file *file, struct vm_area_struct *vma)
+#define to_sq_sysfs_attr(attr) container_of(attr, struct sq_sysfs_attr, attr)
+
+static ssize_t sq_sysfs_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
{
- unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
- unsigned long size = vma->vm_end - vma->vm_start;
- struct sq_mapping *map;
+ struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
- /*
- * We're not interested in any arbitrary virtual address that has
- * been stuck in the VMA, as we already know what addresses we
- * want. Save off the size, and reposition the VMA to begin at
- * the next available sq address.
- */
- vma->vm_start = __sq_get_next_addr();
- vma->vm_end = vma->vm_start + size;
+ if (likely(sattr->show))
+ return sattr->show(buf);
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
- vma->vm_flags |= VM_IO | VM_RESERVED;
-
- map = __sq_alloc_mapping(vma->vm_start, offset, size, "Userspace");
-
- if (io_remap_pfn_range(vma, map->sq_addr, map->addr >> PAGE_SHIFT,
- size, vma->vm_page_prot))
- return -EAGAIN;
-
- vma->vm_ops = &sq_vma_ops;
-
- return 0;
+ return -EIO;
}
-#ifdef CONFIG_PROC_FS
-static int sq_mapping_read_proc(char *buf, char **start, off_t off,
- int len, int *eof, void *data)
+static ssize_t sq_sysfs_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t count)
{
- struct list_head *pos;
+ struct sq_sysfs_attr *sattr = to_sq_sysfs_attr(attr);
+
+ if (likely(sattr->store))
+ return sattr->store(buf, count);
+
+ return -EIO;
+}
+
+static ssize_t mapping_show(char *buf)
+{
+ struct sq_mapping **list, *entry;
char *p = buf;
- list_for_each_prev(pos, &sq_mapping_list) {
- struct sq_mapping *entry;
-
- entry = list_entry(pos, typeof(*entry), list);
-
- p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n", entry->sq_addr,
- entry->sq_addr + entry->size - 1, entry->addr,
- entry->name);
- }
+ for (list = &sq_mapping_list; (entry = *list); list = &entry->next)
+ p += sprintf(p, "%08lx-%08lx [%08lx]: %s\n",
+ entry->sq_addr, entry->sq_addr + entry->size,
+ entry->addr, entry->name);
return p - buf;
}
-#endif
-static struct file_operations sq_fops = {
- .owner = THIS_MODULE,
- .mmap = sq_mmap,
+static ssize_t mapping_store(const char *buf, size_t count)
+{
+ unsigned long base = 0, len = 0;
+
+ sscanf(buf, "%lx %lx", &base, &len);
+ if (!base)
+ return -EIO;
+
+ if (likely(len)) {
+ int ret = sq_remap(base, len, "Userspace",
+ pgprot_val(PAGE_SHARED));
+ if (ret < 0)
+ return ret;
+ } else
+ sq_unmap(base);
+
+ return count;
+}
+
+static struct sq_sysfs_attr mapping_attr =
+ __ATTR(mapping, 0644, mapping_show, mapping_store);
+
+static struct attribute *sq_sysfs_attrs[] = {
+ &mapping_attr.attr,
+ NULL,
};
-static struct miscdevice sq_dev = {
- .minor = STORE_QUEUE_MINOR,
- .name = "sq",
- .fops = &sq_fops,
+static struct sysfs_ops sq_sysfs_ops = {
+ .show = sq_sysfs_show,
+ .store = sq_sysfs_store,
+};
+
+static struct kobj_type ktype_percpu_entry = {
+ .sysfs_ops = &sq_sysfs_ops,
+ .default_attrs = sq_sysfs_attrs,
+};
+
+static int __devinit sq_sysdev_add(struct sys_device *sysdev)
+{
+ unsigned int cpu = sysdev->id;
+ struct kobject *kobj;
+
+ sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL);
+ if (unlikely(!sq_kobject[cpu]))
+ return -ENOMEM;
+
+ kobj = sq_kobject[cpu];
+ kobj->parent = &sysdev->kobj;
+ kobject_set_name(kobj, "%s", "sq");
+ kobj->ktype = &ktype_percpu_entry;
+
+ return kobject_register(kobj);
+}
+
+static int __devexit sq_sysdev_remove(struct sys_device *sysdev)
+{
+ unsigned int cpu = sysdev->id;
+ struct kobject *kobj = sq_kobject[cpu];
+
+ kobject_unregister(kobj);
+ return 0;
+}
+
+static struct sysdev_driver sq_sysdev_driver = {
+ .add = sq_sysdev_add,
+ .remove = __devexit_p(sq_sysdev_remove),
};
static int __init sq_api_init(void)
{
- int ret;
+ unsigned int nr_pages = 0x04000000 >> PAGE_SHIFT;
+ unsigned int size = (nr_pages + (BITS_PER_LONG - 1)) / BITS_PER_LONG;
+ int ret = -ENOMEM;
+
printk(KERN_NOTICE "sq: Registering store queue API.\n");
- create_proc_read_entry("sq_mapping", 0, 0, sq_mapping_read_proc, 0);
+ sq_cache = kmem_cache_create("store_queue_cache",
+ sizeof(struct sq_mapping), 0, 0,
+ NULL, NULL);
+ if (unlikely(!sq_cache))
+ return ret;
- ret = misc_register(&sq_dev);
- if (ret)
- remove_proc_entry("sq_mapping", NULL);
+ sq_bitmap = kzalloc(size, GFP_KERNEL);
+ if (unlikely(!sq_bitmap))
+ goto out;
+
+ ret = sysdev_driver_register(&cpu_sysdev_class, &sq_sysdev_driver);
+ if (unlikely(ret != 0))
+ goto out;
+
+ return 0;
+
+out:
+ kfree(sq_bitmap);
+ kmem_cache_destroy(sq_cache);
return ret;
}
static void __exit sq_api_exit(void)
{
- misc_deregister(&sq_dev);
- remove_proc_entry("sq_mapping", NULL);
+ sysdev_driver_unregister(&cpu_sysdev_class, &sq_sysdev_driver);
+ kfree(sq_bitmap);
+ kmem_cache_destroy(sq_cache);
}
module_init(sq_api_init);
@@ -445,11 +402,7 @@
MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>");
MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues");
MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(STORE_QUEUE_MINOR);
EXPORT_SYMBOL(sq_remap);
EXPORT_SYMBOL(sq_unmap);
-EXPORT_SYMBOL(sq_clear);
-EXPORT_SYMBOL(sq_flush);
EXPORT_SYMBOL(sq_flush_range);
-
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 1378db3..a000227 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 1999, 2000 Niibe Yutaka
* Copyright (C) 2002 M. R. Brown
- * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004 - 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -49,7 +49,7 @@
return 0;
}
-static struct console early_console = {
+static struct console bios_console = {
.name = "bios",
.write = sh_console_write,
.setup = sh_console_setup,
@@ -59,34 +59,43 @@
#endif
#ifdef CONFIG_EARLY_SCIF_CONSOLE
+#include <linux/serial_core.h>
+#include "../../../drivers/serial/sh-sci.h"
+
+#ifdef CONFIG_CPU_SH4
#define SCIF_REG 0xffe80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH72060)
+#define SCIF_REG 0xfffe9800
+#else
+#error "Undefined SCIF for this subtype"
+#endif
+
+static struct uart_port scif_port = {
+ .mapbase = SCIF_REG,
+ .membase = (char __iomem *)SCIF_REG,
+};
static void scif_sercon_putc(int c)
{
- while (!(ctrl_inw(SCIF_REG + 0x10) & 0x20)) ;
+ while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16))
+ ;
- ctrl_outb(c, SCIF_REG + 12);
- ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0x9f), SCIF_REG + 0x10);
+ sci_out(&scif_port, SCxTDR, c);
+ sci_in(&scif_port, SCxSR);
+ sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40));
+
+ while ((sci_in(&scif_port, SCxSR) & 0x40) == 0);
+ ;
if (c == '\n')
scif_sercon_putc('\r');
}
-static void scif_sercon_flush(void)
-{
- ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10);
-
- while (!(ctrl_inw(SCIF_REG + 0x10) & 0x40)) ;
-
- ctrl_outw((ctrl_inw(SCIF_REG + 0x10) & 0xbf), SCIF_REG + 0x10);
-}
-
-static void scif_sercon_write(struct console *con, const char *s, unsigned count)
+static void scif_sercon_write(struct console *con, const char *s,
+ unsigned count)
{
while (count-- > 0)
scif_sercon_putc(*s++);
-
- scif_sercon_flush();
}
static int __init scif_sercon_setup(struct console *con, char *options)
@@ -96,7 +105,7 @@
return 0;
}
-static struct console early_console = {
+static struct console scif_console = {
.name = "sercon",
.write = scif_sercon_write,
.setup = scif_sercon_setup,
@@ -104,7 +113,7 @@
.index = -1,
};
-void scif_sercon_init(int baud)
+static void scif_sercon_init(int baud)
{
ctrl_outw(0, SCIF_REG + 8);
ctrl_outw(0, SCIF_REG);
@@ -122,16 +131,61 @@
}
#endif
-void __init enable_early_printk(void)
-{
-#ifdef CONFIG_EARLY_SCIF_CONSOLE
- scif_sercon_init(115200);
+/*
+ * Setup a default console, if more than one is compiled in, rely on the
+ * earlyprintk= parsing to give priority.
+ */
+static struct console *early_console =
+#ifdef CONFIG_SH_STANDARD_BIOS
+ &bios_console
+#elif defined(CONFIG_EARLY_SCIF_CONSOLE)
+ &scif_console
+#else
+ NULL
#endif
- register_console(&early_console);
-}
+ ;
-void disable_early_printk(void)
+static int __initdata keep_early;
+
+int __init setup_early_printk(char *opt)
{
- unregister_console(&early_console);
-}
+ char *space;
+ char buf[256];
+ strlcpy(buf, opt, sizeof(buf));
+ space = strchr(buf, ' ');
+ if (space)
+ *space = 0;
+
+ if (strstr(buf, "keep"))
+ keep_early = 1;
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+ if (!strncmp(buf, "bios", 4))
+ early_console = &bios_console;
+#endif
+#if defined(CONFIG_EARLY_SCIF_CONSOLE)
+ if (!strncmp(buf, "serial", 6)) {
+ early_console = &scif_console;
+
+#ifdef CONFIG_CPU_SH4
+ scif_sercon_init(115200);
+#endif
+ }
+#endif
+
+ if (likely(early_console))
+ register_console(early_console);
+
+ return 1;
+}
+__setup("earlyprintk=", setup_early_printk);
+
+void __init disable_early_printk(void)
+{
+ if (!keep_early) {
+ printk("disabling early console\n");
+ unregister_console(early_console);
+ } else
+ printk("keeping early console\n");
+}
diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S
index 7dfd2ba..fe82218 100644
--- a/arch/sh/kernel/entry.S
+++ b/arch/sh/kernel/entry.S
@@ -18,24 +18,6 @@
#include <asm/cpu/mmu_context.h>
#include <asm/unistd.h>
-#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
-#define sys_nfsservctl sys_ni_syscall
-#endif
-
-#if !defined(CONFIG_MMU)
-#define sys_madvise sys_ni_syscall
-#define sys_readahead sys_ni_syscall
-#define sys_mprotect sys_ni_syscall
-#define sys_msync sys_ni_syscall
-#define sys_mlock sys_ni_syscall
-#define sys_munlock sys_ni_syscall
-#define sys_mlockall sys_ni_syscall
-#define sys_munlockall sys_ni_syscall
-#define sys_mremap sys_ni_syscall
-#define sys_mincore sys_ni_syscall
-#define sys_remap_file_pages sys_ni_syscall
-#endif
-
! NOTE:
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
! to be jumped is too far, but it causes illegal slot exception.
@@ -326,7 +308,7 @@
.align 2
ret_from_exception:
preempt_stop()
-ret_from_irq:
+ENTRY(ret_from_irq)
!
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
@@ -389,11 +371,12 @@
! r8: current_thread_info
! t: result of "tst #_TIF_NEED_RESCHED, r0"
bf/s work_resched
- tst #_TIF_SIGPENDING, r0
+ tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
work_notifysig:
bt/s restore_all
mov r15, r4
- mov #0, r5
+ mov r12, r5 ! set arg1(save_r0)
+ mov r0, r6
mov.l 2f, r1
mova restore_all, r0
jmp @r1
@@ -431,7 +414,7 @@
.align 2
1: .long schedule
-2: .long do_signal
+2: .long do_notify_resume
.align 2
syscall_exit_work:
@@ -552,6 +535,7 @@
mov.l @r9, r8
jsr @r8 ! jump to specific syscall handler
nop
+ mov.l @(OFF_R0,r15), r12 ! save r0
mov.l r0, @(OFF_R0,r15) ! save the return value
!
syscall_exit:
@@ -644,7 +628,7 @@
!
#if defined(CONFIG_KGDB_NMI)
! Clear in_nmi
- mov.l 4f, k0
+ mov.l 6f, k0
mov #0, k1
mov.b k1, @k0
#endif
@@ -722,7 +706,7 @@
!
!
.align 2
-handle_exception:
+ENTRY(handle_exception)
! Using k0, k1 for scratch registers (r0_bank1, r1_bank),
! save all registers onto stack.
!
@@ -732,8 +716,8 @@
bt/s 1f ! It's a kernel to kernel transition.
mov r15, k0 ! save original stack to k0
/* User space to kernel */
- mov #0x20, k1
- shll8 k1 ! k1 := 8192 (== THREAD_SIZE)
+ mov #(THREAD_SIZE >> 8), k1
+ shll8 k1 ! k1 := THREAD_SIZE
add current, k1
mov k1, r15 ! change to kernel stack
!
@@ -838,300 +822,3 @@
rts
nop
- .data
-ENTRY(sys_call_table)
- .long sys_ni_syscall /* 0 - old "setup()" system call*/
- .long sys_exit
- .long sys_fork
- .long sys_read
- .long sys_write
- .long sys_open /* 5 */
- .long sys_close
- .long sys_waitpid
- .long sys_creat
- .long sys_link
- .long sys_unlink /* 10 */
- .long sys_execve
- .long sys_chdir
- .long sys_time
- .long sys_mknod
- .long sys_chmod /* 15 */
- .long sys_lchown16
- .long sys_ni_syscall /* old break syscall holder */
- .long sys_stat
- .long sys_lseek
- .long sys_getpid /* 20 */
- .long sys_mount
- .long sys_oldumount
- .long sys_setuid16
- .long sys_getuid16
- .long sys_stime /* 25 */
- .long sys_ptrace
- .long sys_alarm
- .long sys_fstat
- .long sys_pause
- .long sys_utime /* 30 */
- .long sys_ni_syscall /* old stty syscall holder */
- .long sys_ni_syscall /* old gtty syscall holder */
- .long sys_access
- .long sys_nice
- .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
- .long sys_sync
- .long sys_kill
- .long sys_rename
- .long sys_mkdir
- .long sys_rmdir /* 40 */
- .long sys_dup
- .long sys_pipe
- .long sys_times
- .long sys_ni_syscall /* old prof syscall holder */
- .long sys_brk /* 45 */
- .long sys_setgid16
- .long sys_getgid16
- .long sys_signal
- .long sys_geteuid16
- .long sys_getegid16 /* 50 */
- .long sys_acct
- .long sys_umount /* recycled never used phys() */
- .long sys_ni_syscall /* old lock syscall holder */
- .long sys_ioctl
- .long sys_fcntl /* 55 */
- .long sys_ni_syscall /* old mpx syscall holder */
- .long sys_setpgid
- .long sys_ni_syscall /* old ulimit syscall holder */
- .long sys_ni_syscall /* sys_olduname */
- .long sys_umask /* 60 */
- .long sys_chroot
- .long sys_ustat
- .long sys_dup2
- .long sys_getppid
- .long sys_getpgrp /* 65 */
- .long sys_setsid
- .long sys_sigaction
- .long sys_sgetmask
- .long sys_ssetmask
- .long sys_setreuid16 /* 70 */
- .long sys_setregid16
- .long sys_sigsuspend
- .long sys_sigpending
- .long sys_sethostname
- .long sys_setrlimit /* 75 */
- .long sys_old_getrlimit
- .long sys_getrusage
- .long sys_gettimeofday
- .long sys_settimeofday
- .long sys_getgroups16 /* 80 */
- .long sys_setgroups16
- .long sys_ni_syscall /* sys_oldselect */
- .long sys_symlink
- .long sys_lstat
- .long sys_readlink /* 85 */
- .long sys_uselib
- .long sys_swapon
- .long sys_reboot
- .long old_readdir
- .long old_mmap /* 90 */
- .long sys_munmap
- .long sys_truncate
- .long sys_ftruncate
- .long sys_fchmod
- .long sys_fchown16 /* 95 */
- .long sys_getpriority
- .long sys_setpriority
- .long sys_ni_syscall /* old profil syscall holder */
- .long sys_statfs
- .long sys_fstatfs /* 100 */
- .long sys_ni_syscall /* ioperm */
- .long sys_socketcall
- .long sys_syslog
- .long sys_setitimer
- .long sys_getitimer /* 105 */
- .long sys_newstat
- .long sys_newlstat
- .long sys_newfstat
- .long sys_uname
- .long sys_ni_syscall /* 110 */ /* iopl */
- .long sys_vhangup
- .long sys_ni_syscall /* idle */
- .long sys_ni_syscall /* vm86old */
- .long sys_wait4
- .long sys_swapoff /* 115 */
- .long sys_sysinfo
- .long sys_ipc
- .long sys_fsync
- .long sys_sigreturn
- .long sys_clone /* 120 */
- .long sys_setdomainname
- .long sys_newuname
- .long sys_ni_syscall /* sys_modify_ldt */
- .long sys_adjtimex
- .long sys_mprotect /* 125 */
- .long sys_sigprocmask
- .long sys_ni_syscall /* old "create_module" */
- .long sys_init_module
- .long sys_delete_module
- .long sys_ni_syscall /* 130: old "get_kernel_syms" */
- .long sys_quotactl
- .long sys_getpgid
- .long sys_fchdir
- .long sys_bdflush
- .long sys_sysfs /* 135 */
- .long sys_personality
- .long sys_ni_syscall /* for afs_syscall */
- .long sys_setfsuid16
- .long sys_setfsgid16
- .long sys_llseek /* 140 */
- .long sys_getdents
- .long sys_select
- .long sys_flock
- .long sys_msync
- .long sys_readv /* 145 */
- .long sys_writev
- .long sys_getsid
- .long sys_fdatasync
- .long sys_sysctl
- .long sys_mlock /* 150 */
- .long sys_munlock
- .long sys_mlockall
- .long sys_munlockall
- .long sys_sched_setparam
- .long sys_sched_getparam /* 155 */
- .long sys_sched_setscheduler
- .long sys_sched_getscheduler
- .long sys_sched_yield
- .long sys_sched_get_priority_max
- .long sys_sched_get_priority_min /* 160 */
- .long sys_sched_rr_get_interval
- .long sys_nanosleep
- .long sys_mremap
- .long sys_setresuid16
- .long sys_getresuid16 /* 165 */
- .long sys_ni_syscall /* vm86 */
- .long sys_ni_syscall /* old "query_module" */
- .long sys_poll
- .long sys_nfsservctl
- .long sys_setresgid16 /* 170 */
- .long sys_getresgid16
- .long sys_prctl
- .long sys_rt_sigreturn
- .long sys_rt_sigaction
- .long sys_rt_sigprocmask /* 175 */
- .long sys_rt_sigpending
- .long sys_rt_sigtimedwait
- .long sys_rt_sigqueueinfo
- .long sys_rt_sigsuspend
- .long sys_pread_wrapper /* 180 */
- .long sys_pwrite_wrapper
- .long sys_chown16
- .long sys_getcwd
- .long sys_capget
- .long sys_capset /* 185 */
- .long sys_sigaltstack
- .long sys_sendfile
- .long sys_ni_syscall /* streams1 */
- .long sys_ni_syscall /* streams2 */
- .long sys_vfork /* 190 */
- .long sys_getrlimit
- .long sys_mmap2
- .long sys_truncate64
- .long sys_ftruncate64
- .long sys_stat64 /* 195 */
- .long sys_lstat64
- .long sys_fstat64
- .long sys_lchown
- .long sys_getuid
- .long sys_getgid /* 200 */
- .long sys_geteuid
- .long sys_getegid
- .long sys_setreuid
- .long sys_setregid
- .long sys_getgroups /* 205 */
- .long sys_setgroups
- .long sys_fchown
- .long sys_setresuid
- .long sys_getresuid
- .long sys_setresgid /* 210 */
- .long sys_getresgid
- .long sys_chown
- .long sys_setuid
- .long sys_setgid
- .long sys_setfsuid /* 215 */
- .long sys_setfsgid
- .long sys_pivot_root
- .long sys_mincore
- .long sys_madvise
- .long sys_getdents64 /* 220 */
- .long sys_fcntl64
- .long sys_ni_syscall /* reserved for TUX */
- .long sys_ni_syscall /* Reserved for Security */
- .long sys_gettid
- .long sys_readahead /* 225 */
- .long sys_setxattr
- .long sys_lsetxattr
- .long sys_fsetxattr
- .long sys_getxattr
- .long sys_lgetxattr /* 230 */
- .long sys_fgetxattr
- .long sys_listxattr
- .long sys_llistxattr
- .long sys_flistxattr
- .long sys_removexattr /* 235 */
- .long sys_lremovexattr
- .long sys_fremovexattr
- .long sys_tkill
- .long sys_sendfile64
- .long sys_futex /* 240 */
- .long sys_sched_setaffinity
- .long sys_sched_getaffinity
- .long sys_ni_syscall
- .long sys_ni_syscall
- .long sys_io_setup /* 245 */
- .long sys_io_destroy
- .long sys_io_getevents
- .long sys_io_submit
- .long sys_io_cancel
- .long sys_fadvise64 /* 250 */
- .long sys_ni_syscall
- .long sys_exit_group
- .long sys_lookup_dcookie
- .long sys_epoll_create
- .long sys_epoll_ctl /* 255 */
- .long sys_epoll_wait
- .long sys_remap_file_pages
- .long sys_set_tid_address
- .long sys_timer_create
- .long sys_timer_settime /* 260 */
- .long sys_timer_gettime
- .long sys_timer_getoverrun
- .long sys_timer_delete
- .long sys_clock_settime
- .long sys_clock_gettime /* 265 */
- .long sys_clock_getres
- .long sys_clock_nanosleep
- .long sys_statfs64
- .long sys_fstatfs64
- .long sys_tgkill /* 270 */
- .long sys_utimes
- .long sys_fadvise64_64_wrapper
- .long sys_ni_syscall /* Reserved for vserver */
- .long sys_ni_syscall /* Reserved for mbind */
- .long sys_ni_syscall /* 275 - get_mempolicy */
- .long sys_ni_syscall /* set_mempolicy */
- .long sys_mq_open
- .long sys_mq_unlink
- .long sys_mq_timedsend
- .long sys_mq_timedreceive /* 280 */
- .long sys_mq_notify
- .long sys_mq_getsetattr
- .long sys_ni_syscall /* Reserved for kexec */
- .long sys_waitid
- .long sys_add_key /* 285 */
- .long sys_request_key
- .long sys_keyctl
- .long sys_ioprio_set
- .long sys_ioprio_get
- .long sys_inotify_init /* 290 */
- .long sys_inotify_add_watch
- .long sys_inotify_rm_watch
-
-/* End of entry.S */
diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S
index 9b9e6ef..f5f53d1 100644
--- a/arch/sh/kernel/head.S
+++ b/arch/sh/kernel/head.S
@@ -11,6 +11,18 @@
* Head.S contains the SH exception handlers and startup code.
*/
#include <linux/linkage.h>
+#include <asm/thread_info.h>
+
+#ifdef CONFIG_CPU_SH4A
+#define SYNCO() synco
+
+#define PREFI(label, reg) \
+ mov.l label, reg; \
+ prefi @reg
+#else
+#define SYNCO()
+#define PREFI(label, reg)
+#endif
.section .empty_zero_page, "aw"
ENTRY(empty_zero_page)
@@ -42,18 +54,25 @@
! Initialize global interrupt mask
mov #0, r0
ldc r0, r6_bank
+
+ /*
+ * Prefetch if possible to reduce cache miss penalty.
+ *
+ * We do this early on for SH-4A as a micro-optimization,
+ * as later on we will have speculative execution enabled
+ * and this will become less of an issue.
+ */
+ PREFI(5f, r0)
+ PREFI(6f, r0)
+
!
mov.l 2f, r0
mov r0, r15 ! Set initial r15 (stack pointer)
- mov #0x20, r1 !
- shll8 r1 ! r1 = 8192
+ mov #(THREAD_SIZE >> 8), r1
+ shll8 r1 ! r1 = THREAD_SIZE
sub r1, r0 !
ldc r0, r7_bank ! ... and initial thread_info
- !
- ! Additional CPU initialization
- mov.l 6f, r0
- jsr @r0
- nop
+
! Clear BSS area
mov.l 3f, r1
add #4, r1
@@ -62,6 +81,14 @@
9: cmp/hs r2, r1
bf/s 9b ! while (r1 < r2)
mov.l r0,@-r2
+
+ ! Additional CPU initialization
+ mov.l 6f, r0
+ jsr @r0
+ nop
+
+ SYNCO() ! Wait for pending instructions..
+
! Start kernel
mov.l 5f, r0
jmp @r0
@@ -69,7 +96,7 @@
.balign 4
1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF
-2: .long stack
+2: .long init_thread_union+THREAD_SIZE
3: .long __bss_start
4: .long _end
5: .long start_kernel
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 71c9fde..501fe03 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -61,6 +61,73 @@
}
EXPORT_SYMBOL(memset_io);
+void __raw_readsl(unsigned long addr, void *datap, int len)
+{
+ u32 *data;
+
+ for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--)
+ *data++ = ctrl_inl(addr);
+
+ if (likely(len >= (0x20 >> 2))) {
+ int tmp2, tmp3, tmp4, tmp5, tmp6;
+
+ __asm__ __volatile__(
+ "1: \n\t"
+ "mov.l @%7, r0 \n\t"
+ "mov.l @%7, %2 \n\t"
+#ifdef CONFIG_CPU_SH4
+ "movca.l r0, @%0 \n\t"
+#else
+ "mov.l r0, @%0 \n\t"
+#endif
+ "mov.l @%7, %3 \n\t"
+ "mov.l @%7, %4 \n\t"
+ "mov.l @%7, %5 \n\t"
+ "mov.l @%7, %6 \n\t"
+ "mov.l @%7, r7 \n\t"
+ "mov.l @%7, r0 \n\t"
+ "mov.l %2, @(0x04,%0) \n\t"
+ "mov #0x20>>2, %2 \n\t"
+ "mov.l %3, @(0x08,%0) \n\t"
+ "sub %2, %1 \n\t"
+ "mov.l %4, @(0x0c,%0) \n\t"
+ "cmp/hi %1, %2 ! T if 32 > len \n\t"
+ "mov.l %5, @(0x10,%0) \n\t"
+ "mov.l %6, @(0x14,%0) \n\t"
+ "mov.l r7, @(0x18,%0) \n\t"
+ "mov.l r0, @(0x1c,%0) \n\t"
+ "bf.s 1b \n\t"
+ " add #0x20, %0 \n\t"
+ : "=&r" (data), "=&r" (len),
+ "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
+ "=&r" (tmp5), "=&r" (tmp6)
+ : "r"(addr), "0" (data), "1" (len)
+ : "r0", "r7", "t", "memory");
+ }
+
+ for (; len != 0; len--)
+ *data++ = ctrl_inl(addr);
+}
+EXPORT_SYMBOL(__raw_readsl);
+
+void __raw_writesl(unsigned long addr, const void *data, int len)
+{
+ if (likely(len != 0)) {
+ int tmp1;
+
+ __asm__ __volatile__ (
+ "1: \n\t"
+ "mov.l @%0+, %1 \n\t"
+ "dt %3 \n\t"
+ "bf.s 1b \n\t"
+ " mov.l %1, @%4 \n\t"
+ : "=&r" (data), "=&r" (tmp1)
+ : "0" (data), "r" (len), "r"(addr)
+ : "t", "memory");
+ }
+}
+EXPORT_SYMBOL(__raw_writesl);
+
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
return sh_mv.mv_ioport_map(port, nr);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index c2e07f7..c7ebd6a 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -1,5 +1,4 @@
-/* $Id: irq.c,v 1.20 2004/01/13 05:52:11 kkojima Exp $
- *
+/*
* linux/arch/sh/kernel/irq.c
*
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
@@ -7,13 +6,15 @@
*
* SuperH version: Copyright (C) 1999 Niibe Yutaka
*/
-
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
#include <asm/irq.h>
#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/thread_info.h>
#include <asm/cpu/mmu_context.h>
/*
@@ -60,15 +61,46 @@
}
#endif
+#ifdef CONFIG_4KSTACKS
+/*
+ * per-CPU IRQ handling contexts (thread information and stack)
+ */
+union irq_ctx {
+ struct thread_info tinfo;
+ u32 stack[THREAD_SIZE/sizeof(u32)];
+};
+
+static union irq_ctx *hardirq_ctx[NR_CPUS];
+static union irq_ctx *softirq_ctx[NR_CPUS];
+#endif
asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs regs)
{
int irq = r4;
+#ifdef CONFIG_4KSTACKS
+ union irq_ctx *curctx, *irqctx;
+#endif
irq_enter();
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+ /* Debugging check for stack overflow: is there less than 1KB free? */
+ {
+ long sp;
+
+ __asm__ __volatile__ ("and r15, %0" :
+ "=r" (sp) : "0" (THREAD_SIZE - 1));
+
+ if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+ printk("do_IRQ: stack overflow: %ld\n",
+ sp - sizeof(struct thread_info));
+ dump_stack();
+ }
+ }
+#endif
+
#ifdef CONFIG_CPU_HAS_INTEVT
__asm__ __volatile__ (
#ifdef CONFIG_CPU_HAS_SR_RB
@@ -87,7 +119,135 @@
#endif
irq = irq_demux(irq);
- __do_IRQ(irq, ®s);
+
+#ifdef CONFIG_4KSTACKS
+ curctx = (union irq_ctx *)current_thread_info();
+ irqctx = hardirq_ctx[smp_processor_id()];
+
+ /*
+ * this is where we switch to the IRQ stack. However, if we are
+ * already using the IRQ stack (because we interrupted a hardirq
+ * handler) we can't do that and just have to keep using the
+ * current stack (which is the irq stack already after all)
+ */
+ if (curctx != irqctx) {
+ u32 *isp;
+
+ isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
+ irqctx->tinfo.task = curctx->tinfo.task;
+ irqctx->tinfo.previous_sp = current_stack_pointer;
+
+ __asm__ __volatile__ (
+ "mov %0, r4 \n"
+ "mov %1, r5 \n"
+ "mov r15, r9 \n"
+ "jsr @%2 \n"
+ /* swith to the irq stack */
+ " mov %3, r15 \n"
+ /* restore the stack (ring zero) */
+ "mov r9, r15 \n"
+ : /* no outputs */
+ : "r" (irq), "r" (®s), "r" (__do_IRQ), "r" (isp)
+ /* XXX: A somewhat excessive clobber list? -PFM */
+ : "memory", "r0", "r1", "r2", "r3", "r4",
+ "r5", "r6", "r7", "r8", "t", "pr"
+ );
+ } else
+#endif
+ __do_IRQ(irq, ®s);
+
irq_exit();
+
return 1;
}
+
+#ifdef CONFIG_4KSTACKS
+/*
+ * These should really be __section__(".bss.page_aligned") as well, but
+ * gcc's 3.0 and earlier don't handle that correctly.
+ */
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__aligned__(THREAD_SIZE)));
+
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__aligned__(THREAD_SIZE)));
+
+/*
+ * allocate per-cpu stacks for hardirq and for softirq processing
+ */
+void irq_ctx_init(int cpu)
+{
+ union irq_ctx *irqctx;
+
+ if (hardirq_ctx[cpu])
+ return;
+
+ irqctx = (union irq_ctx *)&hardirq_stack[cpu * THREAD_SIZE];
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+
+ hardirq_ctx[cpu] = irqctx;
+
+ irqctx = (union irq_ctx *)&softirq_stack[cpu * THREAD_SIZE];
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+
+ softirq_ctx[cpu] = irqctx;
+
+ printk("CPU %u irqstacks, hard=%p soft=%p\n",
+ cpu, hardirq_ctx[cpu], softirq_ctx[cpu]);
+}
+
+void irq_ctx_exit(int cpu)
+{
+ hardirq_ctx[cpu] = NULL;
+}
+
+extern asmlinkage void __do_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+ unsigned long flags;
+ struct thread_info *curctx;
+ union irq_ctx *irqctx;
+ u32 *isp;
+
+ if (in_interrupt())
+ return;
+
+ local_irq_save(flags);
+
+ if (local_softirq_pending()) {
+ curctx = current_thread_info();
+ irqctx = softirq_ctx[smp_processor_id()];
+ irqctx->tinfo.task = curctx->task;
+ irqctx->tinfo.previous_sp = current_stack_pointer;
+
+ /* build the stack frame on the softirq stack */
+ isp = (u32 *)((char *)irqctx + sizeof(*irqctx));
+
+ __asm__ __volatile__ (
+ "mov r15, r9 \n"
+ "jsr @%0 \n"
+ /* switch to the softirq stack */
+ " mov %1, r15 \n"
+ /* restore the thread stack */
+ "mov r9, r15 \n"
+ : /* no outputs */
+ : "r" (__do_softirq), "r" (isp)
+ /* XXX: A somewhat excessive clobber list? -PFM */
+ : "memory", "r0", "r1", "r2", "r3", "r4",
+ "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr"
+ );
+ }
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(do_softirq);
+#endif
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index 42638b9..9c6315f 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -101,16 +101,17 @@
#include <linux/linkage.h>
#include <linux/init.h>
+#ifdef CONFIG_SH_KGDB_CONSOLE
+#include <linux/console.h>
+#endif
+
#include <asm/system.h>
#include <asm/current.h>
#include <asm/signal.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
#include <asm/kgdb.h>
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
-#include <linux/console.h>
-#endif
+#include <asm/io.h>
/* Function pointers for linkage */
kgdb_debug_hook_t *kgdb_debug_hook;
@@ -240,7 +241,6 @@
/* Misc static */
static int stepped_address;
static short stepped_opcode;
-static const char hexchars[] = "0123456789abcdef";
static char in_buffer[BUFMAX];
static char out_buffer[OUTBUFMAX];
@@ -253,29 +253,6 @@
#define BUF_THREAD_ID_SIZE 16
#endif
-/* Return addr as a real volatile address */
-static inline unsigned int ctrl_inl(const unsigned long addr)
-{
- return *(volatile unsigned long *) addr;
-}
-
-/* Correctly set *addr using volatile */
-static inline void ctrl_outl(const unsigned int b, unsigned long addr)
-{
- *(volatile unsigned long *) addr = b;
-}
-
-/* Get high hex bits */
-static char highhex(const int x)
-{
- return hexchars[(x >> 4) & 0xf];
-}
-
-/* Get low hex bits */
-static char lowhex(const int x)
-{
- return hexchars[x & 0xf];
-}
/* Convert ch to hex */
static int hex(const char ch)
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 6bcd8d9..08587cd 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -29,12 +29,6 @@
extern const unsigned int relocate_new_kernel_size;
extern void *gdb_vbr_vector;
-/*
- * Provide a dummy crash_notes definition while crash dump arrives to ppc.
- * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
- */
-void *crash_notes = NULL;
-
void machine_shutdown(void)
{
}
diff --git a/arch/sh/kernel/pm.c b/arch/sh/kernel/pm.c
new file mode 100644
index 0000000..10ab62c
--- /dev/null
+++ b/arch/sh/kernel/pm.c
@@ -0,0 +1,88 @@
+/*
+ * Generic Power Management Routine
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/suspend.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+#include <asm/watchdog.h>
+#include <asm/pm.h>
+
+#define INTR_OFFSET 0x600
+
+#define STBCR 0xffffff82
+#define STBCR2 0xffffff88
+
+#define STBCR_STBY 0x80
+#define STBCR_MSTP2 0x04
+
+#define MCR 0xffffff68
+#define RTCNT 0xffffff70
+
+#define MCR_RMODE 2
+#define MCR_RFSH 4
+
+void pm_enter(void)
+{
+ u8 stbcr, csr;
+ u16 frqcr, mcr;
+ u32 vbr_new, vbr_old;
+
+ set_bl_bit();
+
+ /* set wdt */
+ csr = sh_wdt_read_csr();
+ csr &= ~WTCSR_TME;
+ csr |= WTCSR_CKS_4096;
+ sh_wdt_write_csr(csr);
+ csr = sh_wdt_read_csr();
+ sh_wdt_write_cnt(0);
+
+ /* disable PLL1 */
+ frqcr = ctrl_inw(FRQCR);
+ frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+ ctrl_outw(frqcr, FRQCR);
+
+ /* enable standby */
+ stbcr = ctrl_inb(STBCR);
+ ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+ /* set self-refresh */
+ mcr = ctrl_inw(MCR);
+ ctrl_outw(mcr & ~MCR_RFSH, MCR);
+
+ /* set interrupt handler */
+ asm volatile("stc vbr, %0" : "=r" (vbr_old));
+ vbr_new = get_zeroed_page(GFP_ATOMIC);
+ udelay(50);
+ memcpy((void*)(vbr_new + INTR_OFFSET),
+ &wakeup_start, &wakeup_end - &wakeup_start);
+ asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+ ctrl_outw(0, RTCNT);
+ ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+ cpu_sleep();
+
+ asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+ free_page(vbr_new);
+
+ /* enable PLL1 */
+ frqcr = ctrl_inw(FRQCR);
+ frqcr |= FRQCR_PSTBY;
+ ctrl_outw(frqcr, FRQCR);
+ udelay(50);
+ frqcr |= FRQCR_PLLEN;
+ ctrl_outw(frqcr, FRQCR);
+
+ ctrl_outb(stbcr, STBCR);
+
+ clear_bl_bit();
+}
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index f203131..0b1d5dd 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -81,16 +81,6 @@
void machine_restart(char * __unused)
{
-
-#ifdef CONFIG_KEXEC
- struct kimage *image;
- image = xchg(&kexec_image, 0);
- if (image) {
- machine_shutdown();
- machine_kexec(image);
- }
-#endif
-
/* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
asm volatile("ldc %0, sr\n\t"
"mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
@@ -263,6 +253,7 @@
unsigned long unused,
struct task_struct *p, struct pt_regs *regs)
{
+ struct thread_info *ti = task_thread_info(p);
struct pt_regs *childregs;
#if defined(CONFIG_SH_FPU)
struct task_struct *tsk = current;
@@ -277,8 +268,10 @@
if (user_mode(regs)) {
childregs->regs[15] = usp;
+ ti->addr_limit = USER_DS;
} else {
childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE;
+ ti->addr_limit = KERNEL_DS;
}
if (clone_flags & CLONE_SETTLS) {
childregs->gbr = childregs->regs[0];
@@ -299,13 +292,15 @@
{
ctrl_outl(pc, UBC_BARA);
+#ifdef CONFIG_MMU
/* We don't have any ASID settings for the SH-2! */
if (cpu_data->type != CPU_SH7604)
ctrl_outb(asid, UBC_BASRA);
+#endif
ctrl_outl(0, UBC_BAMRA);
- if (cpu_data->type == CPU_SH7729) {
+ if (cpu_data->type == CPU_SH7729 || cpu_data->type == CPU_SH7710) {
ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
} else {
@@ -344,6 +339,7 @@
}
#endif
+#ifdef CONFIG_MMU
/*
* Restore the kernel mode register
* k7 (r7_bank1)
@@ -351,19 +347,21 @@
asm volatile("ldc %0, r7_bank"
: /* no output */
: "r" (task_thread_info(next)));
+#endif
-#ifdef CONFIG_MMU
/* If no tasks are using the UBC, we're done */
if (ubc_usercnt == 0)
/* If no tasks are using the UBC, we're done */;
else if (next->thread.ubc_pc && next->mm) {
- ubc_set_tracing(next->mm->context & MMU_CONTEXT_ASID_MASK,
- next->thread.ubc_pc);
+ int asid = 0;
+#ifdef CONFIG_MMU
+ asid |= next->mm->context.id & MMU_CONTEXT_ASID_MASK;
+#endif
+ ubc_set_tracing(asid, next->thread.ubc_pc);
} else {
ctrl_outw(0, UBC_BBRA);
ctrl_outw(0, UBC_BBRB);
}
-#endif
return prev;
}
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index f7eebbd..04ca13a0 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -224,7 +224,6 @@
case PTRACE_SETDSPREGS: {
unsigned long dp;
- int i;
ret = -EIO;
dp = ((unsigned long) child) + THREAD_SIZE -
diff --git a/arch/sh/kernel/semaphore.c b/arch/sh/kernel/semaphore.c
index a3c24dc..184119e 100644
--- a/arch/sh/kernel/semaphore.c
+++ b/arch/sh/kernel/semaphore.c
@@ -14,7 +14,7 @@
#include <asm/semaphore.h>
#include <asm/semaphore-helper.h>
-spinlock_t semaphore_wake_lock;
+DEFINE_SPINLOCK(semaphore_wake_lock);
/*
* Semaphores are implemented using a two-way counter:
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index e75189c..5f58733 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -43,27 +43,14 @@
* The bigger value means no problem.
*/
struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, };
+#ifdef CONFIG_VT
struct screen_info screen_info;
+#endif
#if defined(CONFIG_SH_UNKNOWN)
struct sh_machine_vector sh_mv;
#endif
-/* We need this to satisfy some external references. */
-struct screen_info screen_info = {
- 0, 25, /* orig-x, orig-y */
- 0, /* unused */
- 0, /* orig-video-page */
- 0, /* orig-video-mode */
- 80, /* orig-video-cols */
- 0,0,0, /* ega_ax, ega_bx, ega_cx */
- 25, /* orig-video-lines */
- 0, /* orig-video-isVGA */
- 16 /* orig-video-points */
-};
-
-extern void platform_setup(void);
-extern char *get_system_type(void);
extern int root_mountflags;
#define MV_NAME_SIZE 32
@@ -90,29 +77,8 @@
static char command_line[COMMAND_LINE_SIZE] = { 0, };
-struct resource standard_io_resources[] = {
- { "dma1", 0x00, 0x1f },
- { "pic1", 0x20, 0x3f },
- { "timer", 0x40, 0x5f },
- { "keyboard", 0x60, 0x6f },
- { "dma page reg", 0x80, 0x8f },
- { "pic2", 0xa0, 0xbf },
- { "dma2", 0xc0, 0xdf },
- { "fpu", 0xf0, 0xff }
-};
-
-#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
-
-/* System RAM - interrupted by the 640kB-1M hole */
-#define code_resource (ram_resources[3])
-#define data_resource (ram_resources[4])
-static struct resource ram_resources[] = {
- { "System RAM", 0x000000, 0x09ffff, IORESOURCE_BUSY },
- { "System RAM", 0x100000, 0x100000, IORESOURCE_BUSY },
- { "Video RAM area", 0x0a0000, 0x0bffff },
- { "Kernel code", 0x100000, 0 },
- { "Kernel data", 0, 0 }
-};
+static struct resource code_resource = { .name = "Kernel code", };
+static struct resource data_resource = { .name = "Kernel data", };
unsigned long memory_start, memory_end;
@@ -145,6 +111,24 @@
memory_end = memory_start + mem_size;
}
}
+
+#ifdef CONFIG_EARLY_PRINTK
+ if (c == ' ' && !memcmp(from, "earlyprintk=", 12)) {
+ char *ep_end;
+
+ if (to != command_line)
+ to--;
+
+ from += 12;
+ ep_end = strchr(from, ' ');
+
+ setup_early_printk(from);
+ printk("early console enabled\n");
+
+ from = ep_end;
+ }
+#endif
+
if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
char* mv_end;
char* mv_comma;
@@ -237,6 +221,9 @@
__set_io_port_base(mv_io_base);
#endif
+ if (!sh_mv.mv_nr_irqs)
+ sh_mv.mv_nr_irqs = NR_IRQS;
+
return 0;
}
@@ -245,11 +232,6 @@
unsigned long bootmap_size;
unsigned long start_pfn, max_pfn, max_low_pfn;
-#ifdef CONFIG_EARLY_PRINTK
- extern void enable_early_printk(void);
-
- enable_early_printk();
-#endif
#ifdef CONFIG_CMDLINE_BOOL
strcpy(COMMAND_LINE, CONFIG_CMDLINE);
#endif
@@ -368,14 +350,14 @@
#endif
/* Perform the machine specific initialisation */
- platform_setup();
+ if (likely(sh_mv.mv_setup))
+ sh_mv.mv_setup(cmdline_p);
paging_init();
}
struct sh_machine_vector* __init get_mv_byname(const char* name)
{
- extern int strcasecmp(const char *, const char *);
extern long __machvec_start, __machvec_end;
struct sh_machine_vector *all_vecs =
(struct sh_machine_vector *)&__machvec_start;
@@ -410,25 +392,18 @@
subsys_initcall(topology_init);
static const char *cpu_name[] = {
- [CPU_SH7604] = "SH7604",
- [CPU_SH7705] = "SH7705",
- [CPU_SH7708] = "SH7708",
- [CPU_SH7729] = "SH7729",
- [CPU_SH7300] = "SH7300",
- [CPU_SH7750] = "SH7750",
- [CPU_SH7750S] = "SH7750S",
- [CPU_SH7750R] = "SH7750R",
- [CPU_SH7751] = "SH7751",
- [CPU_SH7751R] = "SH7751R",
- [CPU_SH7760] = "SH7760",
- [CPU_SH73180] = "SH73180",
- [CPU_ST40RA] = "ST40RA",
- [CPU_ST40GX1] = "ST40GX1",
- [CPU_SH4_202] = "SH4-202",
- [CPU_SH4_501] = "SH4-501",
- [CPU_SH7770] = "SH7770",
- [CPU_SH7780] = "SH7780",
- [CPU_SH7781] = "SH7781",
+ [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300",
+ [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
+ [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
+ [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
+ [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750",
+ [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R",
+ [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R",
+ [CPU_SH7760] = "SH7760", [CPU_SH73180] = "SH73180",
+ [CPU_ST40RA] = "ST40RA", [CPU_ST40GX1] = "ST40GX1",
+ [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501",
+ [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780",
+ [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343",
[CPU_SH_NONE] = "Unknown"
};
@@ -438,8 +413,10 @@
}
#ifdef CONFIG_PROC_FS
+/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
static const char *cpu_flags[] = {
- "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", "ptea", NULL
+ "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
+ "ptea", "llsc", "l2", NULL
};
static void show_cpuflags(struct seq_file *m)
@@ -460,7 +437,8 @@
seq_printf(m, "\n");
}
-static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_info info)
+static void show_cacheinfo(struct seq_file *m, const char *type,
+ struct cache_info info)
{
unsigned int cache_size;
@@ -493,7 +471,7 @@
* unified cache on the SH-2 and SH-3, as well as the harvard
* style cache on the SH-4.
*/
- if (test_bit(SH_CACHE_COMBINED, &(boot_cpu_data.icache.flags))) {
+ if (boot_cpu_data.icache.flags & SH_CACHE_COMBINED) {
seq_printf(m, "unified\n");
show_cacheinfo(m, "cache", boot_cpu_data.icache);
} else {
@@ -502,6 +480,10 @@
show_cacheinfo(m, "dcache", boot_cpu_data.dcache);
}
+ /* Optional secondary cache */
+ if (boot_cpu_data.flags & CPU_HAS_L2_CACHE)
+ show_cacheinfo(m, "scache", boot_cpu_data.scache);
+
seq_printf(m, "bogomips\t: %lu.%02lu\n",
boot_cpu_data.loops_per_jiffy/(500000/HZ),
(boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100);
@@ -617,4 +599,3 @@
}
__setup("kgdb=", kgdb_parse_options);
#endif /* CONFIG_SH_KGDB */
-
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index 245ed8f..d3cbfa2 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -27,21 +27,11 @@
/* platform dependent support */
EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(iounmap);
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
-EXPORT_SYMBOL(probe_irq_mask);
EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(disable_irq_nosync);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(no_irq_type);
-EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
/* PCI exports */
#ifdef CONFIG_PCI
@@ -52,13 +42,8 @@
/* mem exports */
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memcpy_fromio);
-EXPORT_SYMBOL(memcpy_toio);
EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memset_io);
EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(boot_cpu_data);
@@ -94,7 +79,9 @@
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
DECLARE_EXPORT(__movstrSI12_i4);
+#endif
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
/* needed by some modules */
EXPORT_SYMBOL(flush_cache_all);
EXPORT_SYMBOL(flush_cache_range);
@@ -102,11 +89,9 @@
EXPORT_SYMBOL(__flush_purge_region);
#endif
-#if defined(CONFIG_SH7705_CACHE_32KB)
-EXPORT_SYMBOL(flush_cache_all);
-EXPORT_SYMBOL(flush_cache_range);
-EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(__flush_purge_region);
+#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \
+ defined(CONFIG_SH7705_CACHE_32KB))
+EXPORT_SYMBOL(clear_user_page);
#endif
EXPORT_SYMBOL(flush_tlb_page);
@@ -116,7 +101,12 @@
EXPORT_SYMBOL(synchronize_irq);
#endif
+#ifdef CONFIG_PM
+EXPORT_SYMBOL(pm_suspend);
+#endif
+
EXPORT_SYMBOL(csum_partial);
+#ifdef CONFIG_IPV6
EXPORT_SYMBOL(csum_ipv6_magic);
-EXPORT_SYMBOL(consistent_sync);
+#endif
EXPORT_SYMBOL(clear_page);
diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index b475c4d..5213f5b 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -8,7 +8,6 @@
* SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima
*
*/
-
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
@@ -21,6 +20,7 @@
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/tty.h>
+#include <linux/elf.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
@@ -29,12 +29,8 @@
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
-#define DEBUG_SIG 0
-
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
@@ -43,51 +39,17 @@
unsigned long r5, unsigned long r6, unsigned long r7,
struct pt_regs regs)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(¤t->blocked, mask);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs.regs[0] = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(®s, &saveset))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
- unsigned long r6, unsigned long r7,
- struct pt_regs regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs.regs[0] = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(®s, &saveset))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
asmlinkage int
@@ -348,7 +310,12 @@
return (void __user *)((sp - frame_size) & -8ul);
}
-static void setup_frame(int sig, struct k_sigaction *ka,
+/* These symbols are defined with the addresses in the vsyscall page.
+ See vsyscall-trapa.S. */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
+static int setup_frame(int sig, struct k_sigaction *ka,
sigset_t *set, struct pt_regs *regs)
{
struct sigframe __user *frame;
@@ -368,15 +335,18 @@
err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
- if (_NSIG_WORDS > 1) {
+ if (_NSIG_WORDS > 1)
err |= __copy_to_user(frame->extramask, &set->sig[1],
sizeof(frame->extramask));
- }
/* Set up to return from userspace. If provided, use a stub
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->pr = (unsigned long) ka->sa.sa_restorer;
+#ifdef CONFIG_VSYSCALL
+ } else if (likely(current->mm->context.vdso)) {
+ regs->pr = VDSO_SYM(&__kernel_sigreturn);
+#endif
} else {
/* Generate return code (system call to sigreturn) */
err |= __put_user(MOVW(7), &frame->retcode[0]);
@@ -402,21 +372,22 @@
set_fs(USER_DS);
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
+ pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
+ current->comm, current->pid, frame, regs->pc, regs->pr);
flush_cache_sigtramp(regs->pr);
+
if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
- return;
+
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
@@ -452,6 +423,10 @@
already in userspace. */
if (ka->sa.sa_flags & SA_RESTORER) {
regs->pr = (unsigned long) ka->sa.sa_restorer;
+#ifdef CONFIG_VSYSCALL
+ } else if (likely(current->mm->context.vdso)) {
+ regs->pr = VDSO_SYM(&__kernel_rt_sigreturn);
+#endif
} else {
/* Generate return code (system call to rt_sigreturn) */
err |= __put_user(MOVW(7), &frame->retcode[0]);
@@ -477,28 +452,31 @@
set_fs(USER_DS);
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
- current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
+ pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
+ current->comm, current->pid, frame, regs->pc, regs->pr);
flush_cache_sigtramp(regs->pr);
+
if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
- return;
+
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
}
/*
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *oldset, struct pt_regs *regs)
{
+ int ret;
+
/* Are we from a system call? */
if (regs->tra >= 0) {
/* If so, check system call restarting.. */
@@ -539,19 +517,23 @@
/* Set up the stack frame */
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame(sig, ka, info, oldset, regs);
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
else
- setup_frame(sig, ka, oldset, regs);
+ ret = setup_frame(sig, ka, oldset, regs);
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ if (ret == 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked,sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+
+ return ret;
}
/*
@@ -563,11 +545,12 @@
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+static void do_signal(struct pt_regs *regs, unsigned int save_r0)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
+ sigset_t *oldset;
/*
* We want the common case to go fast, which
@@ -576,19 +559,27 @@
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
if (try_to_freeze())
goto no_signal;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
- handle_signal(signr, &ka, &info, oldset, regs);
- return 1;
+ if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
}
no_signal:
@@ -597,10 +588,27 @@
/* Restart the system call - no handlers present */
if (regs->regs[0] == -ERESTARTNOHAND ||
regs->regs[0] == -ERESTARTSYS ||
- regs->regs[0] == -ERESTARTNOINTR ||
- regs->regs[0] == -ERESTART_RESTARTBLOCK) {
+ regs->regs[0] == -ERESTARTNOINTR) {
+ regs->regs[0] = save_r0;
regs->pc -= 2;
+ } else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
+ regs->pc -= 2;
+ regs->regs[3] = __NR_restart_syscall;
}
}
- return 0;
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
+ __u32 thread_info_flags)
+{
+ /* deal with pending signal delivery */
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ do_signal(regs, save_r0);
}
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 917b2f3..b68ff70 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -21,7 +21,8 @@
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/utsname.h>
-
+#include <linux/module.h>
+#include <asm/cacheflush.h>
#include <asm/uaccess.h>
#include <asm/ipc.h>
@@ -44,11 +45,16 @@
return error;
}
-#if defined(HAVE_ARCH_UNMAPPED_AREA)
+unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */
+
+EXPORT_SYMBOL(shm_align_mask);
+
/*
- * To avoid cache alias, we map the shard page with same color.
+ * To avoid cache aliases, we map the shared page with same color.
*/
-#define COLOUR_ALIGN(addr) (((addr)+SHMLBA-1)&~(SHMLBA-1))
+#define COLOUR_ALIGN(addr, pgoff) \
+ ((((addr) + shm_align_mask) & ~shm_align_mask) + \
+ (((pgoff) << PAGE_SHIFT) & shm_align_mask))
unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
@@ -56,43 +62,52 @@
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long start_addr;
+ int do_colour_align;
if (flags & MAP_FIXED) {
/* We do not accept a shared mapping if it would violate
* cache aliasing constraints.
*/
- if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1)))
+ if ((flags & MAP_SHARED) && (addr & shm_align_mask))
return -EINVAL;
return addr;
}
- if (len > TASK_SIZE)
+ if (unlikely(len > TASK_SIZE))
return -ENOMEM;
+ do_colour_align = 0;
+ if (filp || (flags & MAP_SHARED))
+ do_colour_align = 1;
+
if (addr) {
- if (flags & MAP_PRIVATE)
- addr = PAGE_ALIGN(addr);
+ if (do_colour_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
else
- addr = COLOUR_ALIGN(addr);
+ addr = PAGE_ALIGN(addr);
+
vma = find_vma(mm, addr);
if (TASK_SIZE - len >= addr &&
(!vma || addr + len <= vma->vm_start))
return addr;
}
- if (len <= mm->cached_hole_size) {
+
+ if (len > mm->cached_hole_size) {
+ start_addr = addr = mm->free_area_cache;
+ } else {
mm->cached_hole_size = 0;
- mm->free_area_cache = TASK_UNMAPPED_BASE;
+ start_addr = addr = TASK_UNMAPPED_BASE;
}
- if (flags & MAP_PRIVATE)
- addr = PAGE_ALIGN(mm->free_area_cache);
- else
- addr = COLOUR_ALIGN(mm->free_area_cache);
- start_addr = addr;
full_search:
+ if (do_colour_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(mm->free_area_cache);
+
for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
/* At this point: (!vma || addr < vma->vm_end). */
- if (TASK_SIZE - len < addr) {
+ if (unlikely(TASK_SIZE - len < addr)) {
/*
* Start a new search - just in case we missed
* some holes.
@@ -104,7 +119,7 @@
}
return -ENOMEM;
}
- if (!vma || addr + len <= vma->vm_start) {
+ if (likely(!vma || addr + len <= vma->vm_start)) {
/*
* Remember the place where we stopped the search:
*/
@@ -115,11 +130,10 @@
mm->cached_hole_size = vma->vm_start - addr;
addr = vma->vm_end;
- if (!(flags & MAP_PRIVATE))
- addr = COLOUR_ALIGN(addr);
+ if (do_colour_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
}
}
-#endif
static inline long
do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S
new file mode 100644
index 0000000..768334e
--- /dev/null
+++ b/arch/sh/kernel/syscalls.S
@@ -0,0 +1,353 @@
+/*
+ * arch/sh/kernel/syscalls.S
+ *
+ * System call table for SuperH
+ *
+ * Copyright (C) 1999, 2000, 2002 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+
+#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
+#define sys_nfsservctl sys_ni_syscall
+#endif
+
+#if !defined(CONFIG_MMU)
+#define sys_madvise sys_ni_syscall
+#define sys_readahead sys_ni_syscall
+#define sys_mprotect sys_ni_syscall
+#define sys_msync sys_ni_syscall
+#define sys_mlock sys_ni_syscall
+#define sys_munlock sys_ni_syscall
+#define sys_mlockall sys_ni_syscall
+#define sys_munlockall sys_ni_syscall
+#define sys_mremap sys_ni_syscall
+#define sys_mincore sys_ni_syscall
+#define sys_remap_file_pages sys_ni_syscall
+#endif
+
+ .data
+ENTRY(sys_call_table)
+ .long sys_restart_syscall /* 0 - old "setup()" system call*/
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* sys_olduname */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long sys_ni_syscall /* sys_oldselect */
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_uname
+ .long sys_ni_syscall /* 110 */ /* iopl */
+ .long sys_vhangup
+ .long sys_ni_syscall /* idle */
+ .long sys_ni_syscall /* vm86old */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* sys_modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* vm86 */
+ .long sys_ni_syscall /* old "query_module" */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread_wrapper /* 180 */
+ .long sys_pwrite_wrapper
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall /* Reserved for Security */
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64_wrapper
+ .long sys_ni_syscall /* Reserved for vserver */
+ .long sys_ni_syscall /* Reserved for mbind */
+ .long sys_ni_syscall /* 275 - get_mempolicy */
+ .long sys_ni_syscall /* set_mempolicy */
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_kexec_load
+ .long sys_waitid
+ .long sys_ni_syscall /* 285 */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+ .long sys_ioprio_set
+ .long sys_ioprio_get /* 290 */
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages
+ .long sys_openat /* 295 */
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_futimesat
+ .long sys_fstatat64 /* 300 */
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat /* 305 */
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_pselect6
+ .long sys_ppoll
+ .long sys_unshare /* 310 */
+ .long sys_set_robust_list
+ .long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range
+ .long sys_tee /* 315 */
+ .long sys_vmsplice
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index a1589f8..149d971 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -3,13 +3,12 @@
*
* Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004, 2005 Paul Mundt
+ * Copyright (C) 2002 - 2006 Paul Mundt
* Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
*
* Some code taken from i386 version.
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*/
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -26,15 +25,20 @@
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
-/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want
- * these routines anywhere... */
-#ifdef CONFIG_SH_RTC
-void (*rtc_get_time)(struct timespec *) = sh_rtc_gettimeofday;
-int (*rtc_set_time)(const time_t) = sh_rtc_settimeofday;
-#else
-void (*rtc_get_time)(struct timespec *);
-int (*rtc_set_time)(const time_t);
-#endif
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+ tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+ tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+ return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
/*
* Scheduler clock - returns current time in nanosec units.
@@ -70,7 +74,6 @@
tv->tv_sec = sec;
tv->tv_usec = usec;
}
-
EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
@@ -103,7 +106,6 @@
return 0;
}
-
EXPORT_SYMBOL(do_settimeofday);
/* last time the RTC clock got updated */
@@ -135,7 +137,7 @@
xtime.tv_sec > last_rtc_update + 660 &&
(xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
(xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
- if (rtc_set_time(xtime.tv_sec) == 0)
+ if (rtc_sh_set_time(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
/* do it again in 60s */
@@ -143,8 +145,33 @@
}
}
+#ifdef CONFIG_PM
+int timer_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+ sys_timer->ops->stop();
+
+ return 0;
+}
+
+int timer_resume(struct sys_device *dev)
+{
+ struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+ sys_timer->ops->start();
+
+ return 0;
+}
+#else
+#define timer_suspend NULL
+#define timer_resume NULL
+#endif
+
static struct sysdev_class timer_sysclass = {
set_kset_name("timer"),
+ .suspend = timer_suspend,
+ .resume = timer_resume,
};
static int __init timer_init_sysfs(void)
@@ -156,7 +183,6 @@
sys_timer->dev.cls = &timer_sysclass;
return sysdev_register(&sys_timer->dev);
}
-
device_initcall(timer_init_sysfs);
void (*board_time_init)(void);
@@ -168,15 +194,9 @@
clk_init();
- if (rtc_get_time) {
- rtc_get_time(&xtime);
- } else {
- xtime.tv_sec = mktime(2000, 1, 1, 0, 0, 0);
- xtime.tv_nsec = 0;
- }
-
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ rtc_sh_get_time(&xtime);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
/*
* Find the timer to use as the system timer, it will be
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index d4212ad..205816f 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -132,17 +132,17 @@
ctrl_outl(0xffffffff, TMU0_TCOR);
ctrl_outl(0xffffffff, TMU0_TCNT);
- rtc_get_time(&ts2);
+ rtc_sh_get_time(&ts2);
do {
- rtc_get_time(&ts1);
+ rtc_sh_get_time(&ts1);
} while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
/* actually start the timer */
ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
do {
- rtc_get_time(&ts2);
+ rtc_sh_get_time(&ts2);
} while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
freq = 0xffffffff - ctrl_inl(TMU0_TCNT);
@@ -188,6 +188,18 @@
.ops = &tmu_clk_ops,
};
+static int tmu_timer_start(void)
+{
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+ return 0;
+}
+
+static int tmu_timer_stop(void)
+{
+ ctrl_outb(0, TMU_TSTR);
+ return 0;
+}
+
static int tmu_timer_init(void)
{
unsigned long interval;
@@ -197,7 +209,7 @@
tmu0_clk.parent = clk_get("module_clk");
/* Start TMU0 */
- ctrl_outb(0, TMU_TSTR);
+ tmu_timer_stop();
#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
@@ -211,13 +223,15 @@
ctrl_outl(interval, TMU0_TCOR);
ctrl_outl(interval, TMU0_TCNT);
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+ tmu_timer_start();
return 0;
}
struct sys_timer_ops tmu_timer_ops = {
.init = tmu_timer_init,
+ .start = tmu_timer_start,
+ .stop = tmu_timer_stop,
.get_frequency = tmu_timer_get_frequency,
.get_offset = tmu_timer_get_offset,
};
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index d9db118..c2c597e 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -36,40 +36,15 @@
#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
-#define CHK_REMOTE_DEBUG(regs) \
-{ \
- if ((kgdb_debug_hook != (kgdb_debug_hook_t *) NULL) && (!user_mode(regs))) \
- { \
- (*kgdb_debug_hook)(regs); \
- } \
+#define CHK_REMOTE_DEBUG(regs) \
+{ \
+ if (kgdb_debug_hook && !user_mode(regs))\
+ (*kgdb_debug_hook)(regs); \
}
#else
#define CHK_REMOTE_DEBUG(regs)
#endif
-#define DO_ERROR(trapnr, signr, str, name, tsk) \
-asmlinkage void do_##name(unsigned long r4, unsigned long r5, \
- unsigned long r6, unsigned long r7, \
- struct pt_regs regs) \
-{ \
- unsigned long error_code; \
- \
- /* Check if it's a DSP instruction */ \
- if (is_dsp_inst(®s)) { \
- /* Enable DSP mode, and restart instruction. */ \
- regs.sr |= SR_DSP; \
- return; \
- } \
- \
- asm volatile("stc r2_bank, %0": "=r" (error_code)); \
- local_irq_enable(); \
- tsk->thread.error_code = error_code; \
- tsk->thread.trap_no = trapnr; \
- CHK_REMOTE_DEBUG(®s); \
- force_sig(signr, tsk); \
- die_if_no_fixup(str,®s,error_code); \
-}
-
#ifdef CONFIG_CPU_SH2
#define TRAP_RESERVED_INST 4
#define TRAP_ILLEGAL_SLOT_INST 6
@@ -86,7 +61,7 @@
#define VMALLOC_OFFSET (8*1024*1024)
#define MODULE_RANGE (8*1024*1024)
-spinlock_t die_lock;
+DEFINE_SPINLOCK(die_lock);
void die(const char * str, struct pt_regs * regs, long err)
{
@@ -575,8 +550,117 @@
#define is_dsp_inst(regs) (0)
#endif /* CONFIG_SH_DSP */
-DO_ERROR(TRAP_RESERVED_INST, SIGILL, "reserved instruction", reserved_inst, current)
-DO_ERROR(TRAP_ILLEGAL_SLOT_INST, SIGILL, "illegal slot instruction", illegal_slot_inst, current)
+extern int do_fpu_inst(unsigned short, struct pt_regs*);
+
+asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs regs)
+{
+ unsigned long error_code;
+ struct task_struct *tsk = current;
+
+#ifdef CONFIG_SH_FPU_EMU
+ unsigned short inst;
+ int err;
+
+ get_user(inst, (unsigned short*)regs.pc);
+
+ err = do_fpu_inst(inst, ®s);
+ if (!err) {
+ regs.pc += 2;
+ return;
+ }
+ /* not a FPU inst. */
+#endif
+
+#ifdef CONFIG_SH_DSP
+ /* Check if it's a DSP instruction */
+ if (is_dsp_inst(®s)) {
+ /* Enable DSP mode, and restart instruction. */
+ regs.sr |= SR_DSP;
+ return;
+ }
+#endif
+
+ asm volatile("stc r2_bank, %0": "=r" (error_code));
+ local_irq_enable();
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = TRAP_RESERVED_INST;
+ CHK_REMOTE_DEBUG(®s);
+ force_sig(SIGILL, tsk);
+ die_if_no_fixup("reserved instruction", ®s, error_code);
+}
+
+#ifdef CONFIG_SH_FPU_EMU
+static int emulate_branch(unsigned short inst, struct pt_regs* regs)
+{
+ /*
+ * bfs: 8fxx: PC+=d*2+4;
+ * bts: 8dxx: PC+=d*2+4;
+ * bra: axxx: PC+=D*2+4;
+ * bsr: bxxx: PC+=D*2+4 after PR=PC+4;
+ * braf:0x23: PC+=Rn*2+4;
+ * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4;
+ * jmp: 4x2b: PC=Rn;
+ * jsr: 4x0b: PC=Rn after PR=PC+4;
+ * rts: 000b: PC=PR;
+ */
+ if ((inst & 0xfd00) == 0x8d00) {
+ regs->pc += SH_PC_8BIT_OFFSET(inst);
+ return 0;
+ }
+
+ if ((inst & 0xe000) == 0xa000) {
+ regs->pc += SH_PC_12BIT_OFFSET(inst);
+ return 0;
+ }
+
+ if ((inst & 0xf0df) == 0x0003) {
+ regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4;
+ return 0;
+ }
+
+ if ((inst & 0xf0df) == 0x400b) {
+ regs->pc = regs->regs[(inst & 0x0f00) >> 8];
+ return 0;
+ }
+
+ if ((inst & 0xffff) == 0x000b) {
+ regs->pc = regs->pr;
+ return 0;
+ }
+
+ return 1;
+}
+#endif
+
+asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs regs)
+{
+ unsigned long error_code;
+ struct task_struct *tsk = current;
+#ifdef CONFIG_SH_FPU_EMU
+ unsigned short inst;
+
+ get_user(inst, (unsigned short *)regs.pc + 1);
+ if (!do_fpu_inst(inst, ®s)) {
+ get_user(inst, (unsigned short *)regs.pc);
+ if (!emulate_branch(inst, ®s))
+ return;
+ /* fault in branch.*/
+ }
+ /* not a FPU inst. */
+#endif
+
+ asm volatile("stc r2_bank, %0": "=r" (error_code));
+ local_irq_enable();
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = TRAP_RESERVED_INST;
+ CHK_REMOTE_DEBUG(®s);
+ force_sig(SIGILL, tsk);
+ die_if_no_fixup("illegal slot instruction", ®s, error_code);
+}
asmlinkage void do_exception_error(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
@@ -634,14 +718,16 @@
exception_handling_table[TRAP_ILLEGAL_SLOT_INST]
= (void *)do_illegal_slot_inst;
-#ifdef CONFIG_CPU_SH4
- if (!(cpu_data->flags & CPU_HAS_FPU)) {
- /* For SH-4 lacking an FPU, treat floating point instructions
- as reserved. */
- /* entry 64 corresponds to EXPEVT=0x800 */
- exception_handling_table[64] = (void *)do_reserved_inst;
- exception_handling_table[65] = (void *)do_illegal_slot_inst;
- }
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \
+ defined(CONFIG_SH_FPU_EMU)
+ /*
+ * For SH-4 lacking an FPU, treat floating point instructions as
+ * reserved. They'll be handled in the math-emu case, or faulted on
+ * otherwise.
+ */
+ /* entry 64 corresponds to EXPEVT=0x800 */
+ exception_handling_table[64] = (void *)do_reserved_inst;
+ exception_handling_table[65] = (void *)do_illegal_slot_inst;
#endif
/* Setup VBR for boot cpu */
@@ -655,20 +741,12 @@
unsigned long module_end = VMALLOC_END;
int i = 1;
- if (tsk && !sp) {
+ if (!tsk)
+ tsk = current;
+ if (tsk == current)
+ sp = (unsigned long *)current_stack_pointer;
+ else
sp = (unsigned long *)tsk->thread.sp;
- }
-
- if (!sp) {
- __asm__ __volatile__ (
- "mov r15, %0\n\t"
- "stc r7_bank, %1\n\t"
- : "=r" (module_start),
- "=r" (module_end)
- );
-
- sp = (unsigned long *)module_start;
- }
stack = sp;
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 95fdd91..5eb9309 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -2,6 +2,7 @@
* ld script to make SuperH Linux kernel
* Written by Niibe Yutaka
*/
+#include <asm/thread_info.h>
#include <asm-generic/vmlinux.lds.h>
#ifdef CONFIG_CPU_LITTLE_ENDIAN
@@ -13,7 +14,7 @@
ENTRY(_start)
SECTIONS
{
- . = 0x80000000 + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
+ . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
_text = .; /* Text and read-only data */
text = .; /* Text and read-only data */
.empty_zero_page : {
@@ -40,16 +41,16 @@
*(.data)
/* Align the initial ramdisk image (INITRD) on page boundaries. */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__rd_start = .;
*(.initrd)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__rd_end = .;
CONSTRUCTORS
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.data.page_aligned : { *(.data.idt) }
. = ALIGN(32);
@@ -60,12 +61,10 @@
_edata = .; /* End of data section */
- . = ALIGN(8192); /* init_task */
+ . = ALIGN(THREAD_SIZE); /* init_task */
.data.init_task : { *(.data.init_task) }
- /* stack */
- .stack : { stack = .; _stack = .; }
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
_sinittext = .;
.init.text : { *(.init.text) }
@@ -96,7 +95,7 @@
__machvec_start = .;
.init.machvec : { *(.init.machvec) }
__machvec_end = .;
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
. = ALIGN(4);
diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile
new file mode 100644
index 0000000..4bbce1c
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/Makefile
@@ -0,0 +1,36 @@
+obj-y += vsyscall.o vsyscall-syscall.o
+
+$(obj)/vsyscall-syscall.o: \
+ $(foreach F,trapa,$(obj)/vsyscall-$F.so)
+
+# Teach kbuild about targets
+targets += $(foreach F,trapa,vsyscall-$F.o vsyscall-$F.so)
+targets += vsyscall-note.o vsyscall.lds
+
+# The DSO images are built using a special linker script
+quiet_cmd_syscall = SYSCALL $@
+ cmd_syscall = $(CC) -nostdlib $(SYSCFLAGS_$(@F)) \
+ -Wl,-T,$(filter-out FORCE,$^) -o $@
+
+export CPPFLAGS_vsyscall.lds += -P -C -Ush
+
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
+ $(call ld-option, -Wl$(comma)--hash-style=sysv)
+
+SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags)
+
+$(obj)/vsyscall-trapa.so: \
+$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
+ $(call if_changed,syscall)
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO. With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vsyscall-syms.o
+$(obj)/built-in.o: $(obj)/vsyscall-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o
+
+SYSCFLAGS_vsyscall-syms.o = -r
+$(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
+ $(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE
+ $(call if_changed,syscall)
diff --git a/arch/sh/kernel/vsyscall/vsyscall-note.S b/arch/sh/kernel/vsyscall/vsyscall-note.S
new file mode 100644
index 0000000..d4b5be4
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-note.S
@@ -0,0 +1,25 @@
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+
+#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type) \
+ .section name, flags; \
+ .balign 4; \
+ .long 1f - 0f; /* name length */ \
+ .long 3f - 2f; /* data length */ \
+ .long type; /* note type */ \
+0: .asciz vendor; /* vendor name */ \
+1: .balign 4; \
+2:
+
+#define ASM_ELF_NOTE_END \
+3: .balign 4; /* pad out section */ \
+ .previous
+
+ ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
+ .long LINUX_VERSION_CODE
+ ASM_ELF_NOTE_END
diff --git a/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
new file mode 100644
index 0000000..555a64f
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-sigreturn.S
@@ -0,0 +1,39 @@
+#include <asm/unistd.h>
+
+ .text
+ .balign 32
+ .globl __kernel_sigreturn
+ .type __kernel_sigreturn,@function
+__kernel_sigreturn:
+.LSTART_sigreturn:
+ mov.w 1f, r3
+ trapa #0x10
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+
+1: .short __NR_sigreturn
+.LEND_sigreturn:
+ .size __kernel_sigreturn,.-.LSTART_sigreturn
+
+ .balign 32
+ .globl __kernel_rt_sigreturn
+ .type __kernel_rt_sigreturn,@function
+__kernel_rt_sigreturn:
+.LSTART_rt_sigreturn:
+ mov.w 1f, r3
+ trapa #0x10
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+ or r0, r0
+
+1: .short __NR_rt_sigreturn
+.LEND_rt_sigreturn:
+ .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
+
+ .section .eh_frame,"a",@progbits
+ .previous
diff --git a/arch/sh/kernel/vsyscall/vsyscall-syscall.S b/arch/sh/kernel/vsyscall/vsyscall-syscall.S
new file mode 100644
index 0000000..c2ac7f0
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-syscall.S
@@ -0,0 +1,10 @@
+#include <linux/init.h>
+
+__INITDATA
+
+ .globl vsyscall_trapa_start, vsyscall_trapa_end
+vsyscall_trapa_start:
+ .incbin "arch/sh/kernel/vsyscall/vsyscall-trapa.so"
+vsyscall_trapa_end:
+
+__FINIT
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
new file mode 100644
index 0000000..3b6eb34
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
@@ -0,0 +1,42 @@
+ .text
+ .globl __kernel_vsyscall
+ .type __kernel_vsyscall,@function
+__kernel_vsyscall:
+.LSTART_vsyscall:
+ /* XXX: We'll have to do something here once we opt to use the vDSO
+ * page for something other than the signal trampoline.. as well as
+ * fill out .eh_frame -- PFM. */
+.LEND_vsyscall:
+ .size __kernel_vsyscall,.-.LSTART_vsyscall
+ .previous
+
+ .section .eh_frame,"a",@progbits
+.LCIE:
+ .ualong .LCIE_end - .LCIE_start
+.LCIE_start:
+ .ualong 0 /* CIE ID */
+ .byte 0x1 /* Version number */
+ .string "zRS" /* NUL-terminated augmentation string */
+ .uleb128 0x1 /* Code alignment factor */
+ .sleb128 -4 /* Data alignment factor */
+ .byte 0x11 /* Return address register column */
+ /* Augmentation length and data (none) */
+ .byte 0xc /* DW_CFA_def_cfa */
+ .uleb128 0xf /* r15 */
+ .uleb128 0x0 /* offset 0 */
+
+ .align 2
+.LCIE_end:
+
+ .ualong .LFDE_end-.LFDE_start /* Length FDE */
+.LFDE_start:
+ .ualong .LCIE /* CIE pointer */
+ .ualong .LSTART_vsyscall-. /* start address */
+ .ualong .LEND_vsyscall-.LSTART_vsyscall
+ .uleb128 0
+ .align 2
+.LFDE_end:
+ .previous
+
+/* Get the common code for the sigreturn entry points */
+#include "vsyscall-sigreturn.S"
diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c
new file mode 100644
index 0000000..075d6cc
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall.c
@@ -0,0 +1,150 @@
+/*
+ * arch/sh/kernel/vsyscall.c
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * vDSO randomization
+ * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/elf.h>
+
+/*
+ * Should the kernel map a VDSO page into processes and pass its
+ * address down to glibc upon exec()?
+ */
+unsigned int __read_mostly vdso_enabled = 1;
+EXPORT_SYMBOL_GPL(vdso_enabled);
+
+static int __init vdso_setup(char *s)
+{
+ vdso_enabled = simple_strtoul(s, NULL, 0);
+ return 1;
+}
+__setup("vdso=", vdso_setup);
+
+/*
+ * These symbols are defined by vsyscall.o to mark the bounds
+ * of the ELF DSO images included therein.
+ */
+extern const char vsyscall_trapa_start, vsyscall_trapa_end;
+static void *syscall_page;
+
+int __init vsyscall_init(void)
+{
+ syscall_page = (void *)get_zeroed_page(GFP_ATOMIC);
+
+ /*
+ * XXX: Map this page to a fixmap entry if we get around
+ * to adding the page to ELF core dumps
+ */
+
+ memcpy(syscall_page,
+ &vsyscall_trapa_start,
+ &vsyscall_trapa_end - &vsyscall_trapa_start);
+
+ return 0;
+}
+
+static struct page *syscall_vma_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ unsigned long offset = address - vma->vm_start;
+ struct page *page;
+
+ if (address < vma->vm_start || address > vma->vm_end)
+ return NOPAGE_SIGBUS;
+
+ page = virt_to_page(syscall_page + offset);
+
+ get_page(page);
+
+ return page;
+}
+
+/* Prevent VMA merging */
+static void syscall_vma_close(struct vm_area_struct *vma)
+{
+}
+
+static struct vm_operations_struct syscall_vm_ops = {
+ .nopage = syscall_vma_nopage,
+ .close = syscall_vma_close,
+};
+
+/* Setup a VMA at program startup for the vsyscall page */
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int executable_stack)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ unsigned long addr;
+ int ret;
+
+ down_write(&mm->mmap_sem);
+ addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+ if (IS_ERR_VALUE(addr)) {
+ ret = addr;
+ goto up_fail;
+ }
+
+ vma = kmem_cache_zalloc(vm_area_cachep, SLAB_KERNEL);
+ if (!vma) {
+ ret = -ENOMEM;
+ goto up_fail;
+ }
+
+ vma->vm_start = addr;
+ vma->vm_end = addr + PAGE_SIZE;
+ /* MAYWRITE to allow gdb to COW and set breakpoints */
+ vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE;
+ vma->vm_flags |= mm->def_flags;
+ vma->vm_page_prot = protection_map[vma->vm_flags & 7];
+ vma->vm_ops = &syscall_vm_ops;
+ vma->vm_mm = mm;
+
+ ret = insert_vm_struct(mm, vma);
+ if (unlikely(ret)) {
+ kmem_cache_free(vm_area_cachep, vma);
+ goto up_fail;
+ }
+
+ current->mm->context.vdso = (void *)addr;
+
+ mm->total_vm++;
+up_fail:
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+ return "[vdso]";
+
+ return NULL;
+}
+
+struct vm_area_struct *get_gate_vma(struct task_struct *task)
+{
+ return NULL;
+}
+
+int in_gate_area(struct task_struct *task, unsigned long address)
+{
+ return 0;
+}
+
+int in_gate_area_no_task(unsigned long address)
+{
+ return 0;
+}
diff --git a/arch/sh/kernel/vsyscall/vsyscall.lds.S b/arch/sh/kernel/vsyscall/vsyscall.lds.S
new file mode 100644
index 0000000..b13c3d4
--- /dev/null
+++ b/arch/sh/kernel/vsyscall/vsyscall.lds.S
@@ -0,0 +1,74 @@
+/*
+ * Linker script for vsyscall DSO. The vsyscall page is an ELF shared
+ * object prelinked to its virtual address, and with only one read-only
+ * segment (that fits in one page). This script controls its layout.
+ */
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+#else
+OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
+#endif
+OUTPUT_ARCH(sh)
+
+/* The ELF entry point can be used to set the AT_SYSINFO value. */
+ENTRY(__kernel_vsyscall);
+
+SECTIONS
+{
+ . = SIZEOF_HEADERS;
+
+ .hash : { *(.hash) } :text
+ .gnu.hash : { *(.gnu.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .gnu.version : { *(.gnu.version) }
+ .gnu.version_d : { *(.gnu.version_d) }
+ .gnu.version_r : { *(.gnu.version_r) }
+
+ /* This linker script is used both with -r and with -shared.
+ For the layouts to match, we need to skip more than enough
+ space for the dynamic symbol table et al. If this amount
+ is insufficient, ld -shared will barf. Just increase it here. */
+ . = 0x400;
+
+ .text : { *(.text) } :text =0x90909090
+ .note : { *(.note.*) } :text :note
+ .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr
+ .eh_frame : { KEEP (*(.eh_frame)) } :text
+ .dynamic : { *(.dynamic) } :text :dynamic
+ .useless : {
+ *(.got.plt) *(.got)
+ *(.data .data.* .gnu.linkonce.d.*)
+ *(.dynbss)
+ *(.bss .bss.* .gnu.linkonce.b.*)
+ } :text
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+ text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
+ dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+ note PT_NOTE FLAGS(4); /* PF_R */
+ eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+ LINUX_2.6 {
+ global:
+ __kernel_vsyscall;
+ __kernel_sigreturn;
+ __kernel_rt_sigreturn;
+
+ local: *;
+ };
+}
diff --git a/arch/sh/lib/checksum.S b/arch/sh/lib/checksum.S
index 7c50dfe..cbdd0d4 100644
--- a/arch/sh/lib/checksum.S
+++ b/arch/sh/lib/checksum.S
@@ -202,8 +202,9 @@
cmp/pz r6 ! Jump if we had at least two bytes.
bt/s 1f
clrt
+ add #2,r6 ! r6 was < 2. Deal with it.
bra 4f
- add #2,r6 ! r6 was < 2. Deal with it.
+ mov r6,r2
3: ! Handle different src and dest alignments.
! This is not common, so simple byte by byte copy will do.
diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
index db6b736..560bc17 100644
--- a/arch/sh/lib/memcpy-sh4.S
+++ b/arch/sh/lib/memcpy-sh4.S
@@ -727,8 +727,8 @@
mov.l @(0x04,r5), r11 ! 18 LS (latency=2)
xtrct r9, r8 ! 48 EX
- mov.w @(0x02,r5), r12 ! 18 LS (latency=2)
- xtrct r10, r9 ! 48 EX
+ mov.l @(0x00,r5), r12 ! 18 LS (latency=2)
+ xtrct r10, r9 ! 48 EX
movca.l r0,@r1 ! 40 LS (latency=3-7)
add #-0x1c, r1 ! 50 EX
diff --git a/arch/sh/lib/memset.S b/arch/sh/lib/memset.S
index 9567009..af91fe2 100644
--- a/arch/sh/lib/memset.S
+++ b/arch/sh/lib/memset.S
@@ -29,6 +29,7 @@
bf/s 1b
mov.b r5,@-r4
2: ! make VVVV
+ extu.b r5,r5
swap.b r5,r0 ! V0
or r0,r5 ! VV
swap.w r5,r0 ! VV00
diff --git a/arch/sh/math-emu/Makefile b/arch/sh/math-emu/Makefile
new file mode 100644
index 0000000..638b342c
--- /dev/null
+++ b/arch/sh/math-emu/Makefile
@@ -0,0 +1 @@
+obj-y := math.o
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
new file mode 100644
index 0000000..26b6046
--- /dev/null
+++ b/arch/sh/math-emu/math.c
@@ -0,0 +1,624 @@
+/*
+ * arch/sh/math-emu/math.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII <takasi-y@ops.dti.ne.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "sfp-util.h"
+#include <math-emu/soft-fp.h>
+#include <math-emu/single.h>
+#include <math-emu/double.h>
+
+#define FPUL (fregs->fpul)
+#define FPSCR (fregs->fpscr)
+#define FPSCR_RM (FPSCR&3)
+#define FPSCR_DN ((FPSCR>>18)&1)
+#define FPSCR_PR ((FPSCR>>19)&1)
+#define FPSCR_SZ ((FPSCR>>20)&1)
+#define FPSCR_FR ((FPSCR>>21)&1)
+#define FPSCR_MASK 0x003fffffUL
+
+#define BANK(n) (n^(FPSCR_FR?16:0))
+#define FR ((unsigned long*)(fregs->fp_regs))
+#define FR0 (FR[BANK(0)])
+#define FRn (FR[BANK(n)])
+#define FRm (FR[BANK(m)])
+#define DR ((unsigned long long*)(fregs->fp_regs))
+#define DRn (DR[BANK(n)/2])
+#define DRm (DR[BANK(m)/2])
+
+#define XREG(n) (n^16)
+#define XFn (FR[BANK(XREG(n))])
+#define XFm (FR[BANK(XREG(m))])
+#define XDn (DR[BANK(XREG(n))/2])
+#define XDm (DR[BANK(XREG(m))/2])
+
+#define R0 (regs->regs[0])
+#define Rn (regs->regs[n])
+#define Rm (regs->regs[m])
+
+#define WRITE(d,a) ({if(put_user(d, (typeof (d)*)a)) return -EFAULT;})
+#define READ(d,a) ({if(get_user(d, (typeof (d)*)a)) return -EFAULT;})
+
+#define PACK_S(r,f) FP_PACK_SP(&r,f)
+#define UNPACK_S(f,r) FP_UNPACK_SP(f,&r)
+#define PACK_D(r,f) \
+ {u32 t[2]; FP_PACK_DP(t,f); ((u32*)&r)[0]=t[1]; ((u32*)&r)[1]=t[0];}
+#define UNPACK_D(f,r) \
+ {u32 t[2]; t[0]=((u32*)&r)[1]; t[1]=((u32*)&r)[0]; FP_UNPACK_DP(f,t);}
+
+// 2 args instructions.
+#define BOTH_PRmn(op,x) \
+ FP_DECL_EX; if(FPSCR_PR) op(D,x,DRm,DRn); else op(S,x,FRm,FRn);
+
+#define CMP_X(SZ,R,M,N) do{ \
+ FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
+ UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+ FP_CMP_##SZ(R, Fn, Fm, 2); }while(0)
+#define EQ_X(SZ,R,M,N) do{ \
+ FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); \
+ UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+ FP_CMP_EQ_##SZ(R, Fn, Fm); }while(0)
+#define CMP(OP) ({ int r; BOTH_PRmn(OP##_X,r); r; })
+
+static int
+fcmp_gt(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ if (CMP(CMP) > 0)
+ regs->sr |= 1;
+ else
+ regs->sr &= ~1;
+
+ return 0;
+}
+
+static int
+fcmp_eq(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ if (CMP(CMP /*EQ*/) == 0)
+ regs->sr |= 1;
+ else
+ regs->sr &= ~1;
+ return 0;
+}
+
+#define ARITH_X(SZ,OP,M,N) do{ \
+ FP_DECL_##SZ(Fm); FP_DECL_##SZ(Fn); FP_DECL_##SZ(Fr); \
+ UNPACK_##SZ(Fm, M); UNPACK_##SZ(Fn, N); \
+ FP_##OP##_##SZ(Fr, Fn, Fm); \
+ PACK_##SZ(N, Fr); }while(0)
+
+static int
+fadd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ BOTH_PRmn(ARITH_X, ADD);
+ return 0;
+}
+
+static int
+fsub(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ BOTH_PRmn(ARITH_X, SUB);
+ return 0;
+}
+
+static int
+fmul(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ BOTH_PRmn(ARITH_X, MUL);
+ return 0;
+}
+
+static int
+fdiv(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ BOTH_PRmn(ARITH_X, DIV);
+ return 0;
+}
+
+static int
+fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ FP_DECL_EX;
+ FP_DECL_S(Fr);
+ FP_DECL_S(Ft);
+ FP_DECL_S(F0);
+ FP_DECL_S(Fm);
+ FP_DECL_S(Fn);
+ UNPACK_S(F0, FR0);
+ UNPACK_S(Fm, FRm);
+ UNPACK_S(Fn, FRn);
+ FP_MUL_S(Ft, Fm, F0);
+ FP_ADD_S(Fr, Fn, Ft);
+ PACK_S(FRn, Fr);
+ return 0;
+}
+
+// to process fmov's extention (odd n for DR access XD).
+#define FMOV_EXT(x) if(x&1) x+=16-1
+
+static int
+fmov_idx_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+ int n)
+{
+ if (FPSCR_SZ) {
+ FMOV_EXT(n);
+ READ(FRn, Rm + R0 + 4);
+ n++;
+ READ(FRn, Rm + R0);
+ } else {
+ READ(FRn, Rm + R0);
+ }
+
+ return 0;
+}
+
+static int
+fmov_mem_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+ int n)
+{
+ if (FPSCR_SZ) {
+ FMOV_EXT(n);
+ READ(FRn, Rm + 4);
+ n++;
+ READ(FRn, Rm);
+ } else {
+ READ(FRn, Rm);
+ }
+
+ return 0;
+}
+
+static int
+fmov_inc_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+ int n)
+{
+ if (FPSCR_SZ) {
+ FMOV_EXT(n);
+ READ(FRn, Rm + 4);
+ n++;
+ READ(FRn, Rm);
+ Rm += 8;
+ } else {
+ READ(FRn, Rm);
+ Rm += 4;
+ }
+
+ return 0;
+}
+
+static int
+fmov_reg_idx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+ int n)
+{
+ if (FPSCR_SZ) {
+ FMOV_EXT(m);
+ WRITE(FRm, Rn + R0 + 4);
+ m++;
+ WRITE(FRm, Rn + R0);
+ } else {
+ WRITE(FRm, Rn + R0);
+ }
+
+ return 0;
+}
+
+static int
+fmov_reg_mem(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+ int n)
+{
+ if (FPSCR_SZ) {
+ FMOV_EXT(m);
+ WRITE(FRm, Rn + 4);
+ m++;
+ WRITE(FRm, Rn);
+ } else {
+ WRITE(FRm, Rn);
+ }
+
+ return 0;
+}
+
+static int
+fmov_reg_dec(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+ int n)
+{
+ if (FPSCR_SZ) {
+ FMOV_EXT(m);
+ Rn -= 8;
+ WRITE(FRm, Rn + 4);
+ m++;
+ WRITE(FRm, Rn);
+ } else {
+ Rn -= 4;
+ WRITE(FRm, Rn);
+ }
+
+ return 0;
+}
+
+static int
+fmov_reg_reg(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m,
+ int n)
+{
+ if (FPSCR_SZ) {
+ FMOV_EXT(m);
+ FMOV_EXT(n);
+ DRn = DRm;
+ } else {
+ FRn = FRm;
+ }
+
+ return 0;
+}
+
+static int
+fnop_mn(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n)
+{
+ return -EINVAL;
+}
+
+// 1 arg instructions.
+#define NOTYETn(i) static int i(struct sh_fpu_soft_struct *fregs, int n) \
+ { printk( #i " not yet done.\n"); return 0; }
+
+NOTYETn(ftrv)
+NOTYETn(fsqrt)
+NOTYETn(fipr)
+NOTYETn(fsca)
+NOTYETn(fsrra)
+
+#define EMU_FLOAT_X(SZ,N) do { \
+ FP_DECL_##SZ(Fn); \
+ FP_FROM_INT_##SZ(Fn, FPUL, 32, int); \
+ PACK_##SZ(N, Fn); }while(0)
+static int ffloat(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FP_DECL_EX;
+
+ if (FPSCR_PR)
+ EMU_FLOAT_X(D, DRn);
+ else
+ EMU_FLOAT_X(S, FRn);
+
+ return 0;
+}
+
+#define EMU_FTRC_X(SZ,N) do { \
+ FP_DECL_##SZ(Fn); \
+ UNPACK_##SZ(Fn, N); \
+ FP_TO_INT_##SZ(FPUL, Fn, 32, 1); }while(0)
+static int ftrc(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FP_DECL_EX;
+
+ if (FPSCR_PR)
+ EMU_FTRC_X(D, DRn);
+ else
+ EMU_FTRC_X(S, FRn);
+
+ return 0;
+}
+
+static int fcnvsd(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FP_DECL_EX;
+ FP_DECL_S(Fn);
+ FP_DECL_D(Fr);
+ UNPACK_S(Fn, FPUL);
+ FP_CONV(D, S, 2, 1, Fr, Fn);
+ PACK_D(DRn, Fr);
+ return 0;
+}
+
+static int fcnvds(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FP_DECL_EX;
+ FP_DECL_D(Fn);
+ FP_DECL_S(Fr);
+ UNPACK_D(Fn, DRn);
+ FP_CONV(S, D, 1, 2, Fr, Fn);
+ PACK_S(FPUL, Fr);
+ return 0;
+}
+
+static int fxchg(struct sh_fpu_soft_struct *fregs, int flag)
+{
+ FPSCR ^= flag;
+ return 0;
+}
+
+static int fsts(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FRn = FPUL;
+ return 0;
+}
+
+static int flds(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FPUL = FRn;
+ return 0;
+}
+
+static int fneg(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FRn ^= (1 << (_FP_W_TYPE_SIZE - 1));
+ return 0;
+}
+
+static int fabs(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FRn &= ~(1 << (_FP_W_TYPE_SIZE - 1));
+ return 0;
+}
+
+static int fld0(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FRn = 0;
+ return 0;
+}
+
+static int fld1(struct sh_fpu_soft_struct *fregs, int n)
+{
+ FRn = (_FP_EXPBIAS_S << (_FP_FRACBITS_S - 1));
+ return 0;
+}
+
+static int fnop_n(struct sh_fpu_soft_struct *fregs, int n)
+{
+ return -EINVAL;
+}
+
+/// Instruction decoders.
+
+static int id_fxfd(struct sh_fpu_soft_struct *, int);
+static int id_fnxd(struct sh_fpu_soft_struct *, struct pt_regs *, int, int);
+
+static int (*fnxd[])(struct sh_fpu_soft_struct *, int) = {
+ fsts, flds, ffloat, ftrc, fneg, fabs, fsqrt, fsrra,
+ fld0, fld1, fcnvsd, fcnvds, fnop_n, fnop_n, fipr, id_fxfd
+};
+
+static int (*fnmx[])(struct sh_fpu_soft_struct *, struct pt_regs *, int, int) = {
+ fadd, fsub, fmul, fdiv, fcmp_eq, fcmp_gt, fmov_idx_reg, fmov_reg_idx,
+ fmov_mem_reg, fmov_inc_reg, fmov_reg_mem, fmov_reg_dec,
+ fmov_reg_reg, id_fnxd, fmac, fnop_mn};
+
+static int id_fxfd(struct sh_fpu_soft_struct *fregs, int x)
+{
+ const int flag[] = { FPSCR_SZ, FPSCR_PR, FPSCR_FR, 0 };
+ switch (x & 3) {
+ case 3:
+ fxchg(fregs, flag[x >> 2]);
+ break;
+ case 1:
+ ftrv(fregs, x - 1);
+ break;
+ default:
+ fsca(fregs, x);
+ }
+ return 0;
+}
+
+static int
+id_fnxd(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int x, int n)
+{
+ return (fnxd[x])(fregs, n);
+}
+
+static int
+id_fnmx(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
+{
+ int n = (code >> 8) & 0xf, m = (code >> 4) & 0xf, x = code & 0xf;
+ return (fnmx[x])(fregs, regs, m, n);
+}
+
+static int
+id_sys(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, u16 code)
+{
+ int n = ((code >> 8) & 0xf);
+ unsigned long *reg = (code & 0x0010) ? &FPUL : &FPSCR;
+
+ switch (code & 0xf0ff) {
+ case 0x005a:
+ case 0x006a:
+ Rn = *reg;
+ break;
+ case 0x405a:
+ case 0x406a:
+ *reg = Rn;
+ break;
+ case 0x4052:
+ case 0x4062:
+ Rn -= 4;
+ WRITE(*reg, Rn);
+ break;
+ case 0x4056:
+ case 0x4066:
+ READ(*reg, Rn);
+ Rn += 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_regs *regs)
+{
+ if ((code & 0xf000) == 0xf000)
+ return id_fnmx(fregs, regs, code);
+ else
+ return id_sys(fregs, regs, code);
+}
+
+/**
+ * denormal_to_double - Given denormalized float number,
+ * store double float
+ *
+ * @fpu: Pointer to sh_fpu_hard structure
+ * @n: Index to FP register
+ */
+static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n)
+{
+ unsigned long du, dl;
+ unsigned long x = fpu->fpul;
+ int exp = 1023 - 126;
+
+ if (x != 0 && (x & 0x7f800000) == 0) {
+ du = (x & 0x80000000);
+ while ((x & 0x00800000) == 0) {
+ x <<= 1;
+ exp--;
+ }
+ x &= 0x007fffff;
+ du |= (exp << 20) | (x >> 3);
+ dl = x << 29;
+
+ fpu->fp_regs[n] = du;
+ fpu->fp_regs[n+1] = dl;
+ }
+}
+
+/**
+ * ieee_fpe_handler - Handle denormalized number exception
+ *
+ * @regs: Pointer to register structure
+ *
+ * Returns 1 when it's handled (should not cause exception).
+ */
+static int ieee_fpe_handler(struct pt_regs *regs)
+{
+ unsigned short insn = *(unsigned short *)regs->pc;
+ unsigned short finsn;
+ unsigned long nextpc;
+ int nib[4] = {
+ (insn >> 12) & 0xf,
+ (insn >> 8) & 0xf,
+ (insn >> 4) & 0xf,
+ insn & 0xf};
+
+ if (nib[0] == 0xb ||
+ (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
+ regs->pr = regs->pc + 4;
+
+ if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
+ nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
+ finsn = *(unsigned short *) (regs->pc + 2);
+ } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
+ if (regs->sr & 1)
+ nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+ else
+ nextpc = regs->pc + 4;
+ finsn = *(unsigned short *) (regs->pc + 2);
+ } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
+ if (regs->sr & 1)
+ nextpc = regs->pc + 4;
+ else
+ nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
+ finsn = *(unsigned short *) (regs->pc + 2);
+ } else if (nib[0] == 0x4 && nib[3] == 0xb &&
+ (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
+ nextpc = regs->regs[nib[1]];
+ finsn = *(unsigned short *) (regs->pc + 2);
+ } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
+ (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
+ nextpc = regs->pc + 4 + regs->regs[nib[1]];
+ finsn = *(unsigned short *) (regs->pc + 2);
+ } else if (insn == 0x000b) { /* rts */
+ nextpc = regs->pr;
+ finsn = *(unsigned short *) (regs->pc + 2);
+ } else {
+ nextpc = regs->pc + 2;
+ finsn = insn;
+ }
+
+ if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
+ struct task_struct *tsk = current;
+
+ if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) {
+ /* FPU error */
+ denormal_to_double (&tsk->thread.fpu.hard,
+ (finsn >> 8) & 0xf);
+ tsk->thread.fpu.hard.fpscr &=
+ ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
+ set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ } else {
+ tsk->thread.trap_no = 11;
+ tsk->thread.error_code = 0;
+ force_sig(SIGFPE, tsk);
+ }
+
+ regs->pc = nextpc;
+ return 1;
+ }
+
+ return 0;
+}
+
+asmlinkage void do_fpu_error(unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs regs)
+{
+ struct task_struct *tsk = current;
+
+ if (ieee_fpe_handler (®s))
+ return;
+
+ regs.pc += 2;
+ tsk->thread.trap_no = 11;
+ tsk->thread.error_code = 0;
+ force_sig(SIGFPE, tsk);
+}
+
+/**
+ * fpu_init - Initialize FPU registers
+ * @fpu: Pointer to software emulated FPU registers.
+ */
+static void fpu_init(struct sh_fpu_soft_struct *fpu)
+{
+ int i;
+
+ fpu->fpscr = FPSCR_INIT;
+ fpu->fpul = 0;
+
+ for (i = 0; i < 16; i++) {
+ fpu->fp_regs[i] = 0;
+ fpu->xfp_regs[i]= 0;
+ }
+}
+
+/**
+ * do_fpu_inst - Handle reserved instructions for FPU emulation
+ * @inst: instruction code.
+ * @regs: registers on stack.
+ */
+int do_fpu_inst(unsigned short inst, struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+ struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft);
+
+ if (!test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+ /* initialize once. */
+ fpu_init(fpu);
+ set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ }
+
+ return fpu_emulate(inst, fpu, regs);
+}
diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h
new file mode 100644
index 0000000..8ae1bd3
--- /dev/null
+++ b/arch/sh/math-emu/sfp-util.h
@@ -0,0 +1,72 @@
+/*
+ * These are copied from glibc/stdlib/longlong.h
+ */
+
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ do { \
+ UWtype __x; \
+ __x = (al) + (bl); \
+ (sh) = (ah) + (bh) + (__x < (al)); \
+ (sl) = __x; \
+ } while (0)
+
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ do { \
+ UWtype __x; \
+ __x = (al) - (bl); \
+ (sh) = (ah) - (bh) - (__x > (al)); \
+ (sl) = __x; \
+ } while (0)
+
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \
+ : "=r" ((u32)(w1)), "=r" ((u32)(w0)) \
+ : "r" ((u32)(u)), "r" ((u32)(v)) \
+ : "macl", "mach")
+
+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { \
+ UWtype __d1, __d0, __q1, __q0; \
+ UWtype __r1, __r0, __m; \
+ __d1 = __ll_highpart (d); \
+ __d0 = __ll_lowpart (d); \
+ \
+ __r1 = (n1) % __d1; \
+ __q1 = (n1) / __d1; \
+ __m = (UWtype) __q1 * __d0; \
+ __r1 = __r1 * __ll_B | __ll_highpart (n0); \
+ if (__r1 < __m) \
+ { \
+ __q1--, __r1 += (d); \
+ if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
+ if (__r1 < __m) \
+ __q1--, __r1 += (d); \
+ } \
+ __r1 -= __m; \
+ \
+ __r0 = __r1 % __d1; \
+ __q0 = __r1 / __d1; \
+ __m = (UWtype) __q0 * __d0; \
+ __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
+ if (__r0 < __m) \
+ { \
+ __q0--, __r0 += (d); \
+ if (__r0 >= (d)) \
+ if (__r0 < __m) \
+ __q0--, __r0 += (d); \
+ } \
+ __r0 -= __m; \
+ \
+ (q) = (UWtype) __q1 * __ll_B | __q0; \
+ (r) = __r0; \
+ } while (0)
+
+#define abort() return 0
+
+#define __BYTE_ORDER __LITTLE_ENDIAN
+
+
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index fb586b1..9dd6064 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -20,7 +20,10 @@
config CPU_SH4A
bool
select CPU_SH4
- select CPU_HAS_INTC2_IRQ
+
+config CPU_SH4AL_DSP
+ bool
+ select CPU_SH4A
config CPU_SUBTYPE_ST40
bool
@@ -48,6 +51,12 @@
select CPU_SH3
select CPU_HAS_PINT_IRQ
+config CPU_SUBTYPE_SH7706
+ bool "Support SH7706 processor"
+ select CPU_SH3
+ help
+ Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
+
config CPU_SUBTYPE_SH7707
bool "Support SH7707 processor"
select CPU_SH3
@@ -69,6 +78,12 @@
help
Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
+config CPU_SUBTYPE_SH7710
+ bool "Support SH7710 processor"
+ select CPU_SH3
+ help
+ Select SH7710 if you have a SH3-DSP SH7710 CPU.
+
comment "SH-4 Processor Support"
config CPU_SUBTYPE_SH7750
@@ -133,10 +148,6 @@
comment "SH-4A Processor Support"
-config CPU_SUBTYPE_SH73180
- bool "Support SH73180 processor"
- select CPU_SH4A
-
config CPU_SUBTYPE_SH7770
bool "Support SH7770 processor"
select CPU_SH4A
@@ -144,6 +155,17 @@
config CPU_SUBTYPE_SH7780
bool "Support SH7780 processor"
select CPU_SH4A
+ select CPU_HAS_INTC2_IRQ
+
+comment "SH4AL-DSP Processor Support"
+
+config CPU_SUBTYPE_SH73180
+ bool "Support SH73180 processor"
+ select CPU_SH4AL_DSP
+
+config CPU_SUBTYPE_SH7343
+ bool "Support SH7343 processor"
+ select CPU_SH4AL_DSP
endmenu
@@ -161,15 +183,59 @@
turning this off will boot the kernel on these machines with the
MMU implicitly switched off.
+config PAGE_OFFSET
+ hex
+ default "0x80000000" if MMU
+ default "0x00000000"
+
+config MEMORY_START
+ hex "Physical memory start address"
+ default "0x08000000"
+ ---help---
+ Computers built with Hitachi SuperH processors always
+ map the ROM starting at address zero. But the processor
+ does not specify the range that RAM takes.
+
+ The physical memory (RAM) start address will be automatically
+ set to 08000000. Other platforms, such as the Solution Engine
+ boards typically map RAM at 0C000000.
+
+ Tweak this only when porting to a new machine which does not
+ already have a defconfig. Changing it from the known correct
+ value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+ hex "Physical memory size"
+ default "0x00400000"
+ help
+ This sets the default memory size assumed by your SH kernel. It can
+ be overridden as normal by the 'mem=' argument on the kernel command
+ line. If unsure, consult your board specifications or just leave it
+ as 0x00400000 which was the default value before this became
+ configurable.
+
config 32BIT
bool "Support 32-bit physical addressing through PMB"
- depends on CPU_SH4A
+ depends on CPU_SH4A && MMU
default y
help
If you say Y here, physical addressing will be extended to
32-bits through the SH-4A PMB. If this is not set, legacy
29-bit physical addressing will be used.
+config VSYSCALL
+ bool "Support vsyscall page"
+ depends on MMU
+ default y
+ help
+ This will enable support for the kernel mapping a vDSO page
+ in process space, and subsequently handing down the entry point
+ to the libc through the ELF auxiliary vector.
+
+ From the kernel side this is used for the signal trampoline.
+ For systems with an MMU that can afford to give up a page,
+ (the default value) say Y.
+
choice
prompt "HugeTLB page size"
depends on HUGETLB_PAGE && CPU_SH4 && MMU
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 9489a14..3ffd7f6 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -6,20 +6,26 @@
obj-$(CONFIG_CPU_SH2) += cache-sh2.o
obj-$(CONFIG_CPU_SH3) += cache-sh3.o
-obj-$(CONFIG_CPU_SH4) += cache-sh4.o pg-sh4.o
+obj-$(CONFIG_CPU_SH4) += cache-sh4.o
obj-$(CONFIG_DMA_PAGE_OPS) += pg-dma.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
mmu-y := fault-nommu.o tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o
+mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \
+ ioremap.o
obj-y += $(mmu-y)
+ifdef CONFIG_DEBUG_FS
+obj-$(CONFIG_CPU_SH4) += cache-debugfs.o
+endif
+
ifdef CONFIG_MMU
-obj-$(CONFIG_CPU_SH3) += tlb-sh3.o
-obj-$(CONFIG_CPU_SH4) += tlb-sh4.o ioremap.o
+obj-$(CONFIG_CPU_SH3) += tlb-sh3.o
+obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o
obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
endif
-obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
+obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o
+obj-$(CONFIG_32BIT) += pmb.o
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
new file mode 100644
index 0000000..a22d914
--- /dev/null
+++ b/arch/sh/mm/cache-debugfs.c
@@ -0,0 +1,147 @@
+/*
+ * debugfs ops for the L1 cache
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/cache.h>
+#include <asm/io.h>
+
+enum cache_type {
+ CACHE_TYPE_ICACHE,
+ CACHE_TYPE_DCACHE,
+ CACHE_TYPE_UNIFIED,
+};
+
+static int cache_seq_show(struct seq_file *file, void *iter)
+{
+ unsigned int cache_type = (unsigned int)file->private;
+ struct cache_info *cache;
+ unsigned int waysize, way, cache_size;
+ unsigned long ccr, base;
+ static unsigned long addrstart = 0;
+
+ /*
+ * Go uncached immediately so we don't skew the results any
+ * more than we already are..
+ */
+ jump_to_P2();
+
+ ccr = ctrl_inl(CCR);
+ if ((ccr & CCR_CACHE_ENABLE) == 0) {
+ back_to_P1();
+
+ seq_printf(file, "disabled\n");
+ return 0;
+ }
+
+ if (cache_type == CACHE_TYPE_DCACHE) {
+ base = CACHE_OC_ADDRESS_ARRAY;
+ cache = &cpu_data->dcache;
+ } else {
+ base = CACHE_IC_ADDRESS_ARRAY;
+ cache = &cpu_data->icache;
+ }
+
+ /*
+ * Due to the amount of data written out (depending on the cache size),
+ * we may be iterated over multiple times. In this case, keep track of
+ * the entry position in addrstart, and rewind it when we've hit the
+ * end of the cache.
+ *
+ * Likewise, the same code is used for multiple caches, so care must
+ * be taken for bouncing addrstart back and forth so the appropriate
+ * cache is hit.
+ */
+ cache_size = cache->ways * cache->sets * cache->linesz;
+ if (((addrstart & 0xff000000) != base) ||
+ (addrstart & 0x00ffffff) > cache_size)
+ addrstart = base;
+
+ waysize = cache->sets;
+
+ /*
+ * If the OC is already in RAM mode, we only have
+ * half of the entries to consider..
+ */
+ if ((ccr & CCR_CACHE_ORA) && cache_type == CACHE_TYPE_DCACHE)
+ waysize >>= 1;
+
+ waysize <<= cache->entry_shift;
+
+ for (way = 0; way < cache->ways; way++) {
+ unsigned long addr;
+ unsigned int line;
+
+ seq_printf(file, "-----------------------------------------\n");
+ seq_printf(file, "Way %d\n", way);
+ seq_printf(file, "-----------------------------------------\n");
+
+ for (addr = addrstart, line = 0;
+ addr < addrstart + waysize;
+ addr += cache->linesz, line++) {
+ unsigned long data = ctrl_inl(addr);
+
+ /* Check the V bit, ignore invalid cachelines */
+ if ((data & 1) == 0)
+ continue;
+
+ /* U: Dirty, cache tag is 10 bits up */
+ seq_printf(file, "%3d: %c 0x%lx\n",
+ line, data & 2 ? 'U' : ' ',
+ data & 0x1ffffc00);
+ }
+
+ addrstart += cache->way_incr;
+ }
+
+ back_to_P1();
+
+ return 0;
+}
+
+static int cache_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, cache_seq_show, inode->u.generic_ip);
+}
+
+static struct file_operations cache_debugfs_fops = {
+ .owner = THIS_MODULE,
+ .open = cache_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __init cache_debugfs_init(void)
+{
+ struct dentry *dcache_dentry, *icache_dentry;
+
+ dcache_dentry = debugfs_create_file("dcache", S_IRUSR, NULL,
+ (unsigned int *)CACHE_TYPE_DCACHE,
+ &cache_debugfs_fops);
+ if (IS_ERR(dcache_dentry))
+ return PTR_ERR(dcache_dentry);
+
+ icache_dentry = debugfs_create_file("icache", S_IRUSR, NULL,
+ (unsigned int *)CACHE_TYPE_ICACHE,
+ &cache_debugfs_fops);
+ if (IS_ERR(icache_dentry)) {
+ debugfs_remove(dcache_dentry);
+ return PTR_ERR(icache_dentry);
+ }
+
+ return 0;
+}
+module_init(cache_debugfs_init);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 524cea5..e48cc22 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -2,49 +2,120 @@
* arch/sh/mm/cache-sh4.c
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2001, 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2001 - 2006 Paul Mundt
* Copyright (C) 2003 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-
#include <linux/init.h>
-#include <linux/mman.h>
#include <linux/mm.h>
-#include <linux/threads.h>
#include <asm/addrspace.h>
-#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/io.h>
-#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
-extern void __flush_cache_4096_all(unsigned long start);
-static void __flush_cache_4096_all_ex(unsigned long start);
-extern void __flush_dcache_all(void);
-static void __flush_dcache_all_ex(void);
+/*
+ * The maximum number of pages we support up to when doing ranged dcache
+ * flushing. Anything exceeding this will simply flush the dcache in its
+ * entirety.
+ */
+#define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */
+
+static void __flush_dcache_segment_1way(unsigned long start,
+ unsigned long extent);
+static void __flush_dcache_segment_2way(unsigned long start,
+ unsigned long extent);
+static void __flush_dcache_segment_4way(unsigned long start,
+ unsigned long extent);
+
+static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+ unsigned long exec_offset);
+
+/*
+ * This is initialised here to ensure that it is not placed in the BSS. If
+ * that were to happen, note that cache_init gets called before the BSS is
+ * cleared, so this would get nulled out which would be hopeless.
+ */
+static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
+ (void (*)(unsigned long, unsigned long))0xdeadbeef;
+
+static void compute_alias(struct cache_info *c)
+{
+ c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
+ c->n_aliases = (c->alias_mask >> PAGE_SHIFT) + 1;
+}
+
+static void __init emit_cache_params(void)
+{
+ printk("PVR=%08x CVR=%08x PRR=%08x\n",
+ ctrl_inl(CCN_PVR),
+ ctrl_inl(CCN_CVR),
+ ctrl_inl(CCN_PRR));
+ printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+ cpu_data->icache.ways,
+ cpu_data->icache.sets,
+ cpu_data->icache.way_incr);
+ printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+ cpu_data->icache.entry_mask,
+ cpu_data->icache.alias_mask,
+ cpu_data->icache.n_aliases);
+ printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+ cpu_data->dcache.ways,
+ cpu_data->dcache.sets,
+ cpu_data->dcache.way_incr);
+ printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+ cpu_data->dcache.entry_mask,
+ cpu_data->dcache.alias_mask,
+ cpu_data->dcache.n_aliases);
+
+ if (!__flush_dcache_segment_fn)
+ panic("unknown number of cache ways\n");
+}
/*
* SH-4 has virtually indexed and physically tagged cache.
*/
-struct semaphore p3map_sem[4];
+/* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */
+#define MAX_P3_SEMAPHORES 16
+
+struct semaphore p3map_sem[MAX_P3_SEMAPHORES];
void __init p3_cache_init(void)
{
- if (remap_area_pages(P3SEG, 0, PAGE_SIZE*4, _PAGE_CACHABLE))
+ int i;
+
+ compute_alias(&cpu_data->icache);
+ compute_alias(&cpu_data->dcache);
+
+ switch (cpu_data->dcache.ways) {
+ case 1:
+ __flush_dcache_segment_fn = __flush_dcache_segment_1way;
+ break;
+ case 2:
+ __flush_dcache_segment_fn = __flush_dcache_segment_2way;
+ break;
+ case 4:
+ __flush_dcache_segment_fn = __flush_dcache_segment_4way;
+ break;
+ default:
+ __flush_dcache_segment_fn = NULL;
+ break;
+ }
+
+ emit_cache_params();
+
+ if (remap_area_pages(P3SEG, 0, PAGE_SIZE * 4, _PAGE_CACHABLE))
panic("%s failed.", __FUNCTION__);
- sema_init (&p3map_sem[0], 1);
- sema_init (&p3map_sem[1], 1);
- sema_init (&p3map_sem[2], 1);
- sema_init (&p3map_sem[3], 1);
+ for (i = 0; i < cpu_data->dcache.n_aliases; i++)
+ sema_init(&p3map_sem[i], 1);
}
/*
@@ -89,7 +160,6 @@
}
}
-
/*
* No write back please
*/
@@ -108,40 +178,6 @@
}
}
-static void __flush_dcache_all_ex(void)
-{
- unsigned long addr, end_addr, entry_offset;
-
- end_addr = CACHE_OC_ADDRESS_ARRAY + (cpu_data->dcache.sets << cpu_data->dcache.entry_shift) * cpu_data->dcache.ways;
- entry_offset = 1 << cpu_data->dcache.entry_shift;
- for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; addr += entry_offset) {
- ctrl_outl(0, addr);
- }
-}
-
-static void __flush_cache_4096_all_ex(unsigned long start)
-{
- unsigned long addr, entry_offset;
- int i;
-
- entry_offset = 1 << cpu_data->dcache.entry_shift;
- for (i = 0; i < cpu_data->dcache.ways; i++, start += cpu_data->dcache.way_incr) {
- for (addr = CACHE_OC_ADDRESS_ARRAY + start;
- addr < CACHE_OC_ADDRESS_ARRAY + 4096 + start;
- addr += entry_offset) {
- ctrl_outl(0, addr);
- }
- }
-}
-
-void flush_cache_4096_all(unsigned long start)
-{
- if (cpu_data->dcache.ways == 1)
- __flush_cache_4096_all(start);
- else
- __flush_cache_4096_all_ex(start);
-}
-
/*
* Write back the range of D-cache, and purge the I-cache.
*
@@ -153,14 +189,14 @@
}
/*
- * Write back the D-cache and purge the I-cache for signal trampoline.
+ * Write back the D-cache and purge the I-cache for signal trampoline.
* .. which happens to be the same behavior as flush_icache_range().
* So, we simply flush out a line.
*/
void flush_cache_sigtramp(unsigned long addr)
{
unsigned long v, index;
- unsigned long flags;
+ unsigned long flags;
int i;
v = addr & ~(L1_CACHE_BYTES-1);
@@ -172,30 +208,33 @@
local_irq_save(flags);
jump_to_P2();
- for(i = 0; i < cpu_data->icache.ways; i++, index += cpu_data->icache.way_incr)
+
+ for (i = 0; i < cpu_data->icache.ways;
+ i++, index += cpu_data->icache.way_incr)
ctrl_outl(0, index); /* Clear out Valid-bit */
+
back_to_P1();
+ wmb();
local_irq_restore(flags);
}
static inline void flush_cache_4096(unsigned long start,
unsigned long phys)
{
- unsigned long flags;
- extern void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long exec_offset);
+ unsigned long flags, exec_offset = 0;
/*
- * SH7751, SH7751R, and ST40 have no restriction to handle cache.
- * (While SH7750 must do that at P2 area.)
+ * All types of SH-4 require PC to be in P2 to operate on the I-cache.
+ * Some types of SH-4 require PC to be in P2 to operate on the D-cache.
*/
- if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG)
- || start < CACHE_OC_ADDRESS_ARRAY) {
- local_irq_save(flags);
- __flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0x20000000);
- local_irq_restore(flags);
- } else {
- __flush_cache_4096(start | SH_CACHE_ASSOC, P1SEGADDR(phys), 0);
- }
+ if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) ||
+ (start < CACHE_OC_ADDRESS_ARRAY))
+ exec_offset = 0x20000000;
+
+ local_irq_save(flags);
+ __flush_cache_4096(start | SH_CACHE_ASSOC,
+ P1SEGADDR(phys), exec_offset);
+ local_irq_restore(flags);
}
/*
@@ -206,15 +245,19 @@
{
if (test_bit(PG_mapped, &page->flags)) {
unsigned long phys = PHYSADDR(page_address(page));
+ unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
+ int i, n;
/* Loop all the D-cache */
- flush_cache_4096(CACHE_OC_ADDRESS_ARRAY, phys);
- flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x1000, phys);
- flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x2000, phys);
- flush_cache_4096(CACHE_OC_ADDRESS_ARRAY | 0x3000, phys);
+ n = cpu_data->dcache.n_aliases;
+ for (i = 0; i < n; i++, addr += PAGE_SIZE)
+ flush_cache_4096(addr, phys);
}
+
+ wmb();
}
+/* TODO: Selective icache invalidation through IC address array.. */
static inline void flush_icache_all(void)
{
unsigned long flags, ccr;
@@ -227,34 +270,142 @@
ccr |= CCR_CACHE_ICI;
ctrl_outl(ccr, CCR);
+ /*
+ * back_to_P1() will take care of the barrier for us, don't add
+ * another one!
+ */
+
back_to_P1();
local_irq_restore(flags);
}
+void flush_dcache_all(void)
+{
+ (*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size);
+ wmb();
+}
+
void flush_cache_all(void)
{
- if (cpu_data->dcache.ways == 1)
- __flush_dcache_all();
- else
- __flush_dcache_all_ex();
+ flush_dcache_all();
flush_icache_all();
}
+static void __flush_cache_mm(struct mm_struct *mm, unsigned long start,
+ unsigned long end)
+{
+ unsigned long d = 0, p = start & PAGE_MASK;
+ unsigned long alias_mask = cpu_data->dcache.alias_mask;
+ unsigned long n_aliases = cpu_data->dcache.n_aliases;
+ unsigned long select_bit;
+ unsigned long all_aliases_mask;
+ unsigned long addr_offset;
+ pgd_t *dir;
+ pmd_t *pmd;
+ pud_t *pud;
+ pte_t *pte;
+ int i;
+
+ dir = pgd_offset(mm, p);
+ pud = pud_offset(dir, p);
+ pmd = pmd_offset(pud, p);
+ end = PAGE_ALIGN(end);
+
+ all_aliases_mask = (1 << n_aliases) - 1;
+
+ do {
+ if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) {
+ p &= PMD_MASK;
+ p += PMD_SIZE;
+ pmd++;
+
+ continue;
+ }
+
+ pte = pte_offset_kernel(pmd, p);
+
+ do {
+ unsigned long phys;
+ pte_t entry = *pte;
+
+ if (!(pte_val(entry) & _PAGE_PRESENT)) {
+ pte++;
+ p += PAGE_SIZE;
+ continue;
+ }
+
+ phys = pte_val(entry) & PTE_PHYS_MASK;
+
+ if ((p ^ phys) & alias_mask) {
+ d |= 1 << ((p & alias_mask) >> PAGE_SHIFT);
+ d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT);
+
+ if (d == all_aliases_mask)
+ goto loop_exit;
+ }
+
+ pte++;
+ p += PAGE_SIZE;
+ } while (p < end && ((unsigned long)pte & ~PAGE_MASK));
+ pmd++;
+ } while (p < end);
+
+loop_exit:
+ addr_offset = 0;
+ select_bit = 1;
+
+ for (i = 0; i < n_aliases; i++) {
+ if (d & select_bit) {
+ (*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE);
+ wmb();
+ }
+
+ select_bit <<= 1;
+ addr_offset += PAGE_SIZE;
+ }
+}
+
+/*
+ * Note : (RPC) since the caches are physically tagged, the only point
+ * of flush_cache_mm for SH-4 is to get rid of aliases from the
+ * D-cache. The assumption elsewhere, e.g. flush_cache_range, is that
+ * lines can stay resident so long as the virtual address they were
+ * accessed with (hence cache set) is in accord with the physical
+ * address (i.e. tag). It's no different here. So I reckon we don't
+ * need to flush the I-cache, since aliases don't matter for that. We
+ * should try that.
+ *
+ * Caller takes mm->mmap_sem.
+ */
void flush_cache_mm(struct mm_struct *mm)
{
- /* Is there any good way? */
- /* XXX: possibly call flush_cache_range for each vm area */
- /*
- * FIXME: Really, the optimal solution here would be able to flush out
- * individual lines created by the specified context, but this isn't
- * feasible for a number of architectures (such as MIPS, and some
- * SPARC) .. is this possible for SuperH?
- *
- * In the meantime, we'll just flush all of the caches.. this
- * seems to be the simplest way to avoid at least a few wasted
- * cache flushes. -Lethal
+ /*
+ * If cache is only 4k-per-way, there are never any 'aliases'. Since
+ * the cache is physically tagged, the data can just be left in there.
*/
- flush_cache_all();
+ if (cpu_data->dcache.n_aliases == 0)
+ return;
+
+ /*
+ * Don't bother groveling around the dcache for the VMA ranges
+ * if there are too many PTEs to make it worthwhile.
+ */
+ if (mm->nr_ptes >= MAX_DCACHE_PAGES)
+ flush_dcache_all();
+ else {
+ struct vm_area_struct *vma;
+
+ /*
+ * In this case there are reasonably sized ranges to flush,
+ * iterate through the VMA list and take care of any aliases.
+ */
+ for (vma = mm->mmap; vma; vma = vma->vm_next)
+ __flush_cache_mm(mm, vma->vm_start, vma->vm_end);
+ }
+
+ /* Only touch the icache if one of the VMAs has VM_EXEC set. */
+ if (mm->exec_vm)
+ flush_icache_all();
}
/*
@@ -263,27 +414,40 @@
* ADDR: Virtual Address (U0 address)
* PFN: Physical page number
*/
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn)
+void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn)
{
unsigned long phys = pfn << PAGE_SHIFT;
+ unsigned int alias_mask;
+
+ alias_mask = cpu_data->dcache.alias_mask;
/* We only need to flush D-cache when we have alias */
- if ((address^phys) & CACHE_ALIAS) {
+ if ((address^phys) & alias_mask) {
/* Loop 4K of the D-cache */
flush_cache_4096(
- CACHE_OC_ADDRESS_ARRAY | (address & CACHE_ALIAS),
+ CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
phys);
/* Loop another 4K of the D-cache */
flush_cache_4096(
- CACHE_OC_ADDRESS_ARRAY | (phys & CACHE_ALIAS),
+ CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
phys);
}
- if (vma->vm_flags & VM_EXEC)
- /* Loop 4K (half) of the I-cache */
+ alias_mask = cpu_data->icache.alias_mask;
+ if (vma->vm_flags & VM_EXEC) {
+ /*
+ * Evict entries from the portion of the cache from which code
+ * may have been executed at this address (virtual). There's
+ * no need to evict from the portion corresponding to the
+ * physical address as for the D-cache, because we know the
+ * kernel has never executed the code through its identity
+ * translation.
+ */
flush_cache_4096(
- CACHE_IC_ADDRESS_ARRAY | (address & 0x1000),
+ CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
phys);
+ }
}
/*
@@ -298,52 +462,31 @@
void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
{
- unsigned long p = start & PAGE_MASK;
- pgd_t *dir;
- pmd_t *pmd;
- pte_t *pte;
- pte_t entry;
- unsigned long phys;
- unsigned long d = 0;
+ /*
+ * If cache is only 4k-per-way, there are never any 'aliases'. Since
+ * the cache is physically tagged, the data can just be left in there.
+ */
+ if (cpu_data->dcache.n_aliases == 0)
+ return;
- dir = pgd_offset(vma->vm_mm, p);
- pmd = pmd_offset(dir, p);
+ /*
+ * Don't bother with the lookup and alias check if we have a
+ * wide range to cover, just blow away the dcache in its
+ * entirety instead. -- PFM.
+ */
+ if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES)
+ flush_dcache_all();
+ else
+ __flush_cache_mm(vma->vm_mm, start, end);
- do {
- if (pmd_none(*pmd) || pmd_bad(*pmd)) {
- p &= ~((1 << PMD_SHIFT) -1);
- p += (1 << PMD_SHIFT);
- pmd++;
- continue;
- }
- pte = pte_offset_kernel(pmd, p);
- do {
- entry = *pte;
- if ((pte_val(entry) & _PAGE_PRESENT)) {
- phys = pte_val(entry)&PTE_PHYS_MASK;
- if ((p^phys) & CACHE_ALIAS) {
- d |= 1 << ((p & CACHE_ALIAS)>>12);
- d |= 1 << ((phys & CACHE_ALIAS)>>12);
- if (d == 0x0f)
- goto loop_exit;
- }
- }
- pte++;
- p += PAGE_SIZE;
- } while (p < end && ((unsigned long)pte & ~PAGE_MASK));
- pmd++;
- } while (p < end);
- loop_exit:
- if (d & 1)
- flush_cache_4096_all(0);
- if (d & 2)
- flush_cache_4096_all(0x1000);
- if (d & 4)
- flush_cache_4096_all(0x2000);
- if (d & 8)
- flush_cache_4096_all(0x3000);
- if (vma->vm_flags & VM_EXEC)
+ if (vma->vm_flags & VM_EXEC) {
+ /*
+ * TODO: Is this required??? Need to look at how I-cache
+ * coherency is assured when new programs are loaded to see if
+ * this matters.
+ */
flush_icache_all();
+ }
}
/*
@@ -357,5 +500,273 @@
struct page *page, unsigned long addr, int len)
{
flush_cache_page(vma, addr, page_to_pfn(page));
+ mb();
}
+/**
+ * __flush_cache_4096
+ *
+ * @addr: address in memory mapped cache array
+ * @phys: P1 address to flush (has to match tags if addr has 'A' bit
+ * set i.e. associative write)
+ * @exec_offset: set to 0x20000000 if flush has to be executed from P2
+ * region else 0x0
+ *
+ * The offset into the cache array implied by 'addr' selects the
+ * 'colour' of the virtual address range that will be flushed. The
+ * operation (purge/write-back) is selected by the lower 2 bits of
+ * 'phys'.
+ */
+static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+ unsigned long exec_offset)
+{
+ int way_count;
+ unsigned long base_addr = addr;
+ struct cache_info *dcache;
+ unsigned long way_incr;
+ unsigned long a, ea, p;
+ unsigned long temp_pc;
+
+ dcache = &cpu_data->dcache;
+ /* Write this way for better assembly. */
+ way_count = dcache->ways;
+ way_incr = dcache->way_incr;
+
+ /*
+ * Apply exec_offset (i.e. branch to P2 if required.).
+ *
+ * FIXME:
+ *
+ * If I write "=r" for the (temp_pc), it puts this in r6 hence
+ * trashing exec_offset before it's been added on - why? Hence
+ * "=&r" as a 'workaround'
+ */
+ asm volatile("mov.l 1f, %0\n\t"
+ "add %1, %0\n\t"
+ "jmp @%0\n\t"
+ "nop\n\t"
+ ".balign 4\n\t"
+ "1: .long 2f\n\t"
+ "2:\n" : "=&r" (temp_pc) : "r" (exec_offset));
+
+ /*
+ * We know there will be >=1 iteration, so write as do-while to avoid
+ * pointless nead-of-loop check for 0 iterations.
+ */
+ do {
+ ea = base_addr + PAGE_SIZE;
+ a = base_addr;
+ p = phys;
+
+ do {
+ *(volatile unsigned long *)a = p;
+ /*
+ * Next line: intentionally not p+32, saves an add, p
+ * will do since only the cache tag bits need to
+ * match.
+ */
+ *(volatile unsigned long *)(a+32) = p;
+ a += 64;
+ p += 64;
+ } while (a < ea);
+
+ base_addr += way_incr;
+ } while (--way_count != 0);
+}
+
+/*
+ * Break the 1, 2 and 4 way variants of this out into separate functions to
+ * avoid nearly all the overhead of having the conditional stuff in the function
+ * bodies (+ the 1 and 2 way cases avoid saving any registers too).
+ */
+static void __flush_dcache_segment_1way(unsigned long start,
+ unsigned long extent_per_way)
+{
+ unsigned long orig_sr, sr_with_bl;
+ unsigned long base_addr;
+ unsigned long way_incr, linesz, way_size;
+ struct cache_info *dcache;
+ register unsigned long a0, a0e;
+
+ asm volatile("stc sr, %0" : "=r" (orig_sr));
+ sr_with_bl = orig_sr | (1<<28);
+ base_addr = ((unsigned long)&empty_zero_page[0]);
+
+ /*
+ * The previous code aligned base_addr to 16k, i.e. the way_size of all
+ * existing SH-4 D-caches. Whilst I don't see a need to have this
+ * aligned to any better than the cache line size (which it will be
+ * anyway by construction), let's align it to at least the way_size of
+ * any existing or conceivable SH-4 D-cache. -- RPC
+ */
+ base_addr = ((base_addr >> 16) << 16);
+ base_addr |= start;
+
+ dcache = &cpu_data->dcache;
+ linesz = dcache->linesz;
+ way_incr = dcache->way_incr;
+ way_size = dcache->way_size;
+
+ a0 = base_addr;
+ a0e = base_addr + extent_per_way;
+ do {
+ asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
+ asm volatile("movca.l r0, @%0\n\t"
+ "ocbi @%0" : : "r" (a0));
+ a0 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "ocbi @%0" : : "r" (a0));
+ a0 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "ocbi @%0" : : "r" (a0));
+ a0 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "ocbi @%0" : : "r" (a0));
+ asm volatile("ldc %0, sr" : : "r" (orig_sr));
+ a0 += linesz;
+ } while (a0 < a0e);
+}
+
+static void __flush_dcache_segment_2way(unsigned long start,
+ unsigned long extent_per_way)
+{
+ unsigned long orig_sr, sr_with_bl;
+ unsigned long base_addr;
+ unsigned long way_incr, linesz, way_size;
+ struct cache_info *dcache;
+ register unsigned long a0, a1, a0e;
+
+ asm volatile("stc sr, %0" : "=r" (orig_sr));
+ sr_with_bl = orig_sr | (1<<28);
+ base_addr = ((unsigned long)&empty_zero_page[0]);
+
+ /* See comment under 1-way above */
+ base_addr = ((base_addr >> 16) << 16);
+ base_addr |= start;
+
+ dcache = &cpu_data->dcache;
+ linesz = dcache->linesz;
+ way_incr = dcache->way_incr;
+ way_size = dcache->way_size;
+
+ a0 = base_addr;
+ a1 = a0 + way_incr;
+ a0e = base_addr + extent_per_way;
+ do {
+ asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1" : :
+ "r" (a0), "r" (a1));
+ a0 += linesz;
+ a1 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1" : :
+ "r" (a0), "r" (a1));
+ a0 += linesz;
+ a1 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1" : :
+ "r" (a0), "r" (a1));
+ a0 += linesz;
+ a1 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1" : :
+ "r" (a0), "r" (a1));
+ asm volatile("ldc %0, sr" : : "r" (orig_sr));
+ a0 += linesz;
+ a1 += linesz;
+ } while (a0 < a0e);
+}
+
+static void __flush_dcache_segment_4way(unsigned long start,
+ unsigned long extent_per_way)
+{
+ unsigned long orig_sr, sr_with_bl;
+ unsigned long base_addr;
+ unsigned long way_incr, linesz, way_size;
+ struct cache_info *dcache;
+ register unsigned long a0, a1, a2, a3, a0e;
+
+ asm volatile("stc sr, %0" : "=r" (orig_sr));
+ sr_with_bl = orig_sr | (1<<28);
+ base_addr = ((unsigned long)&empty_zero_page[0]);
+
+ /* See comment under 1-way above */
+ base_addr = ((base_addr >> 16) << 16);
+ base_addr |= start;
+
+ dcache = &cpu_data->dcache;
+ linesz = dcache->linesz;
+ way_incr = dcache->way_incr;
+ way_size = dcache->way_size;
+
+ a0 = base_addr;
+ a1 = a0 + way_incr;
+ a2 = a1 + way_incr;
+ a3 = a2 + way_incr;
+ a0e = base_addr + extent_per_way;
+ do {
+ asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "movca.l r0, @%2\n\t"
+ "movca.l r0, @%3\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1\n\t"
+ "ocbi @%2\n\t"
+ "ocbi @%3\n\t" : :
+ "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+ a0 += linesz;
+ a1 += linesz;
+ a2 += linesz;
+ a3 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "movca.l r0, @%2\n\t"
+ "movca.l r0, @%3\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1\n\t"
+ "ocbi @%2\n\t"
+ "ocbi @%3\n\t" : :
+ "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+ a0 += linesz;
+ a1 += linesz;
+ a2 += linesz;
+ a3 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "movca.l r0, @%2\n\t"
+ "movca.l r0, @%3\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1\n\t"
+ "ocbi @%2\n\t"
+ "ocbi @%3\n\t" : :
+ "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+ a0 += linesz;
+ a1 += linesz;
+ a2 += linesz;
+ a3 += linesz;
+ asm volatile("movca.l r0, @%0\n\t"
+ "movca.l r0, @%1\n\t"
+ "movca.l r0, @%2\n\t"
+ "movca.l r0, @%3\n\t"
+ "ocbi @%0\n\t"
+ "ocbi @%1\n\t"
+ "ocbi @%2\n\t"
+ "ocbi @%3\n\t" : :
+ "r" (a0), "r" (a1), "r" (a2), "r" (a3));
+ asm volatile("ldc %0, sr" : : "r" (orig_sr));
+ a0 += linesz;
+ a1 += linesz;
+ a2 += linesz;
+ a3 += linesz;
+ } while (a0 < a0e);
+}
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index bf94eed..045abdf 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -9,7 +9,6 @@
* for more details.
*
*/
-
#include <linux/init.h>
#include <linux/mman.h>
#include <linux/mm.h>
@@ -25,14 +24,10 @@
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
-/* The 32KB cache on the SH7705 suffers from the same synonym problem
- * as SH4 CPUs */
-
-#define __pte_offset(address) \
- ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
- __pte_offset(address))
-
+/*
+ * The 32KB cache on the SH7705 suffers from the same synonym problem
+ * as SH4 CPUs
+ */
static inline void cache_wback_all(void)
{
unsigned long ways, waysize, addrstart;
@@ -73,7 +68,6 @@
__flush_wback_region((void *)start, end - start);
}
-
/*
* Writeback&Invalidate the D-cache of the page
*/
@@ -128,7 +122,6 @@
local_irq_restore(flags);
}
-
/*
* Write back & invalidate the D-cache of the page.
* (To avoid "alias" issues)
@@ -186,7 +179,8 @@
*
* ADDRESS: Virtual Address (U0 address)
*/
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long pfn)
+void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
+ unsigned long pfn)
{
__flush_dcache_page(pfn << PAGE_SHIFT);
}
@@ -203,4 +197,3 @@
{
__flush_purge_region(page_address(page), PAGE_SIZE);
}
-
diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S
index 08acead..7b96425 100644
--- a/arch/sh/mm/clear_page.S
+++ b/arch/sh/mm/clear_page.S
@@ -193,102 +193,5 @@
nop
.L4096: .word 4096
-ENTRY(__flush_cache_4096)
- mov.l 1f,r3
- add r6,r3
- mov r4,r0
- mov #64,r2
- shll r2
- mov #64,r6
- jmp @r3
- mov #96,r7
- .align 2
-1: .long 2f
-2:
- .rept 32
- mov.l r5,@r0
- mov.l r5,@(32,r0)
- mov.l r5,@(r0,r6)
- mov.l r5,@(r0,r7)
- add r2,r5
- add r2,r0
- .endr
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- rts
- nop
-
-ENTRY(__flush_dcache_all)
- mov.l 2f,r0
- mov.l 3f,r4
- and r0,r4 ! r4 = (unsigned long)&empty_zero_page[0] & ~0xffffc000
- stc sr,r1 ! save SR
- mov.l 4f,r2
- or r1,r2
- mov #32,r3
- shll2 r3
-1:
- ldc r2,sr ! set BL bit
- movca.l r0,@r4
- ocbi @r4
- add #32,r4
- movca.l r0,@r4
- ocbi @r4
- add #32,r4
- movca.l r0,@r4
- ocbi @r4
- add #32,r4
- movca.l r0,@r4
- ocbi @r4
- ldc r1,sr ! restore SR
- dt r3
- bf/s 1b
- add #32,r4
-
- rts
- nop
- .align 2
-2: .long 0xffffc000
-3: .long empty_zero_page
-4: .long 0x10000000 ! BL bit
-
-/* __flush_cache_4096_all(unsigned long addr) */
-ENTRY(__flush_cache_4096_all)
- mov.l 2f,r0
- mov.l 3f,r2
- and r0,r2
- or r2,r4 ! r4 = addr | (unsigned long)&empty_zero_page[0] & ~0x3fff
- stc sr,r1 ! save SR
- mov.l 4f,r2
- or r1,r2
- mov #32,r3
-1:
- ldc r2,sr ! set BL bit
- movca.l r0,@r4
- ocbi @r4
- add #32,r4
- movca.l r0,@r4
- ocbi @r4
- add #32,r4
- movca.l r0,@r4
- ocbi @r4
- add #32,r4
- movca.l r0,@r4
- ocbi @r4
- ldc r1,sr ! restore SR
- dt r3
- bf/s 1b
- add #32,r4
-
- rts
- nop
- .align 2
-2: .long 0xffffc000
-3: .long empty_zero_page
-4: .long 0x10000000 ! BL bit
#endif
+
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index ee73e30..c81e6b6 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -9,6 +9,8 @@
*/
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/addrspace.h>
#include <asm/io.h>
void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle)
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index 775f86c..c69fd60 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -1,33 +1,22 @@
-/* $Id: fault.c,v 1.14 2004/01/13 05:52:11 kkojima Exp $
+/*
+ * Page fault handler for SH with an MMU.
*
- * linux/arch/sh/mm/fault.c
* Copyright (C) 1999 Niibe Yutaka
* Copyright (C) 2003 Paul Mundt
*
* Based on linux/arch/i386/mm/fault.c:
* Copyright (C) 1995 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
+#include <linux/hardirq.h>
+#include <linux/kprobes.h>
#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
#include <asm/kgdb.h>
extern void die(const char *,struct pt_regs *,long);
@@ -187,18 +176,30 @@
goto no_context;
}
+#ifdef CONFIG_SH_STORE_QUEUES
/*
- * Called with interrupt disabled.
+ * This is a special case for the SH-4 store queues, as pages for this
+ * space still need to be faulted in before it's possible to flush the
+ * store queue cache for writeout to the remapped region.
*/
-asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
- unsigned long address)
+#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000)
+#else
+#define P3_ADDR_MAX P4SEG
+#endif
+
+/*
+ * Called with interrupts disabled.
+ */
+asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
+ unsigned long writeaccess,
+ unsigned long address)
{
- unsigned long addrmax = P4SEG;
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
pte_t entry;
- struct mm_struct *mm;
+ struct mm_struct *mm = current->mm;
spinlock_t *ptl;
int ret = 1;
@@ -207,31 +208,37 @@
kgdb_bus_err_hook();
#endif
-#ifdef CONFIG_SH_STORE_QUEUES
- addrmax = P4SEG_STORE_QUE + 0x04000000;
-#endif
-
- if (address >= P3SEG && address < addrmax) {
+ /*
+ * We don't take page faults for P1, P2, and parts of P4, these
+ * are always mapped, whether it be due to legacy behaviour in
+ * 29-bit mode, or due to PMB configuration in 32-bit mode.
+ */
+ if (address >= P3SEG && address < P3_ADDR_MAX) {
pgd = pgd_offset_k(address);
mm = NULL;
- } else if (address >= TASK_SIZE)
- return 1;
- else if (!(mm = current->mm))
- return 1;
- else
- pgd = pgd_offset(mm, address);
+ } else {
+ if (unlikely(address >= TASK_SIZE || !mm))
+ return 1;
- pmd = pmd_offset(pgd, address);
+ pgd = pgd_offset(mm, address);
+ }
+
+ pud = pud_offset(pgd, address);
+ if (pud_none_or_clear_bad(pud))
+ return 1;
+ pmd = pmd_offset(pud, address);
if (pmd_none_or_clear_bad(pmd))
return 1;
+
if (mm)
pte = pte_offset_map_lock(mm, pmd, address, &ptl);
else
pte = pte_offset_kernel(pmd, address);
entry = *pte;
- if (pte_none(entry) || pte_not_present(entry)
- || (writeaccess && !pte_write(entry)))
+ if (unlikely(pte_none(entry) || pte_not_present(entry)))
+ goto unlock;
+ if (unlikely(writeaccess && !pte_write(entry)))
goto unlock;
if (writeaccess)
@@ -243,13 +250,7 @@
* ITLB is not affected by "ldtlb" instruction.
* So, we need to flush the entry by ourselves.
*/
-
- {
- unsigned long flags;
- local_irq_save(flags);
- __flush_tlb_page(get_asid(), address&PAGE_MASK);
- local_irq_restore(flags);
- }
+ __flush_tlb_page(get_asid(), address & PAGE_MASK);
#endif
set_pte(pte, entry);
@@ -260,121 +261,3 @@
pte_unmap_unlock(pte, ptl);
return ret;
}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
- if (vma->vm_mm && vma->vm_mm->context != NO_CONTEXT) {
- unsigned long flags;
- unsigned long asid;
- unsigned long saved_asid = MMU_NO_ASID;
-
- asid = vma->vm_mm->context & MMU_CONTEXT_ASID_MASK;
- page &= PAGE_MASK;
-
- local_irq_save(flags);
- if (vma->vm_mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- __flush_tlb_page(asid, page);
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- local_irq_restore(flags);
- }
-}
-
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- struct mm_struct *mm = vma->vm_mm;
-
- if (mm->context != NO_CONTEXT) {
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- mm->context = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm);
- } else {
- unsigned long asid = mm->context&MMU_CONTEXT_ASID_MASK;
- unsigned long saved_asid = MMU_NO_ASID;
-
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- if (mm != current->mm) {
- saved_asid = get_asid();
- set_asid(asid);
- }
- while (start < end) {
- __flush_tlb_page(asid, start);
- start += PAGE_SIZE;
- }
- if (saved_asid != MMU_NO_ASID)
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
- }
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
- unsigned long flags;
- int size;
-
- local_irq_save(flags);
- size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
- flush_tlb_all();
- } else {
- unsigned long asid = init_mm.context&MMU_CONTEXT_ASID_MASK;
- unsigned long saved_asid = get_asid();
-
- start &= PAGE_MASK;
- end += (PAGE_SIZE - 1);
- end &= PAGE_MASK;
- set_asid(asid);
- while (start < end) {
- __flush_tlb_page(asid, start);
- start += PAGE_SIZE;
- }
- set_asid(saved_asid);
- }
- local_irq_restore(flags);
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
- /* Invalidate all TLB of this process. */
- /* Instead of invalidating each TLB, we get new MMU context. */
- if (mm->context != NO_CONTEXT) {
- unsigned long flags;
-
- local_irq_save(flags);
- mm->context = NO_CONTEXT;
- if (mm == current->mm)
- activate_context(mm);
- local_irq_restore(flags);
- }
-}
-
-void flush_tlb_all(void)
-{
- unsigned long flags, status;
-
- /*
- * Flush all the TLB.
- *
- * Write to the MMU control register's bit:
- * TF-bit for SH-3, TI-bit for SH-4.
- * It's same position, bit #2.
- */
- local_irq_save(flags);
- status = ctrl_inl(MMUCR);
- status |= 0x04;
- ctrl_outl(status, MMUCR);
- local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 2a85bc1..329059d 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -26,63 +26,43 @@
pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte = NULL;
pgd = pgd_offset(mm, addr);
if (pgd) {
- pmd = pmd_alloc(mm, pgd, addr);
- if (pmd)
- pte = pte_alloc_map(mm, pmd, addr);
+ pud = pud_alloc(mm, pgd, addr);
+ if (pud) {
+ pmd = pmd_alloc(mm, pud, addr);
+ if (pmd)
+ pte = pte_alloc_map(mm, pmd, addr);
+ }
}
+
return pte;
}
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte = NULL;
pgd = pgd_offset(mm, addr);
if (pgd) {
- pmd = pmd_offset(pgd, addr);
- if (pmd)
- pte = pte_offset_map(pmd, addr);
+ pud = pud_offset(pgd, addr);
+ if (pud) {
+ pmd = pmd_offset(pud, addr);
+ if (pmd)
+ pte = pte_offset_map(pmd, addr);
+ }
}
+
return pte;
}
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t entry)
-{
- int i;
-
- for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
- set_pte_at(mm, addr, ptep, entry);
- ptep++;
- addr += PAGE_SIZE;
- pte_val(entry) += PAGE_SIZE;
- }
-}
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- pte_t entry;
- int i;
-
- entry = *ptep;
-
- for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
- pte_clear(mm, addr, ptep);
- addr += PAGE_SIZE;
- ptep++;
- }
-
- return entry;
-}
-
struct page *follow_huge_addr(struct mm_struct *mm,
unsigned long address, int write)
{
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 8ea27ca..7154d1c 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -24,7 +24,7 @@
#include <linux/highmem.h>
#include <linux/bootmem.h>
#include <linux/pagemap.h>
-
+#include <linux/proc_fs.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -80,6 +80,7 @@
static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
{
pgd_t *pgd;
+ pud_t *pud;
pmd_t *pmd;
pte_t *pte;
@@ -89,7 +90,17 @@
return;
}
- pmd = pmd_offset(pgd, addr);
+ pud = pud_offset(pgd, addr);
+ if (pud_none(*pud)) {
+ pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC);
+ set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER));
+ if (pmd != pmd_offset(pud, 0)) {
+ pud_ERROR(*pud);
+ return;
+ }
+ }
+
+ pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd)) {
pte = (pte_t *)get_zeroed_page(GFP_ATOMIC);
set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER));
@@ -212,6 +223,8 @@
free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
}
+static struct kcore_list kcore_mem, kcore_vmalloc;
+
void __init mem_init(void)
{
extern unsigned long empty_zero_page[1024];
@@ -237,8 +250,13 @@
* Setup wrappers for copy/clear_page(), these will get overridden
* later in the boot process if a better method is available.
*/
+#ifdef CONFIG_MMU
copy_page = copy_page_slow;
clear_page = clear_page_slow;
+#else
+ copy_page = copy_page_nommu;
+ clear_page = clear_page_nommu;
+#endif
/* this will put all low memory onto the freelists */
totalram_pages += free_all_bootmem_node(NODE_DATA(0));
@@ -254,7 +272,12 @@
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
- printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
+ kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+ kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
+ VMALLOC_END - VMALLOC_START);
+
+ printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
+ "%dk reserved, %dk data, %dk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
max_mapnr << (PAGE_SHIFT-10),
codesize >> 10,
@@ -263,6 +286,9 @@
initsize >> 10);
p3_cache_init();
+
+ /* Initialize the vDSO */
+ vsyscall_init();
}
void free_initmem(void)
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
index 96fa4a9..a9fe80c 100644
--- a/arch/sh/mm/ioremap.c
+++ b/arch/sh/mm/ioremap.c
@@ -15,6 +15,7 @@
#include <linux/vmalloc.h>
#include <linux/module.h>
#include <linux/mm.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
@@ -135,6 +136,20 @@
return (void __iomem *)phys_to_virt(phys_addr);
/*
+ * If we're on an SH7751 or SH7780 PCI controller, PCI memory is
+ * mapped at the end of the address space (typically 0xfd000000)
+ * in a non-translatable area, so mapping through page tables for
+ * this area is not only pointless, but also fundamentally
+ * broken. Just return the physical address instead.
+ *
+ * For boards that map a small PCI memory aperture somewhere in
+ * P1/P2 space, ioremap() will already do the right thing,
+ * and we'll never get this far.
+ */
+ if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr))
+ return (void __iomem *)phys_addr;
+
+ /*
* Don't allow anybody to remap normal RAM that we're using..
*/
if (phys_addr < virt_to_phys(high_memory))
@@ -192,7 +207,7 @@
unsigned long vaddr = (unsigned long __force)addr;
struct vm_struct *p;
- if (PXSEG(vaddr) < P3SEG)
+ if (PXSEG(vaddr) < P3SEG || is_pci_memaddr(vaddr))
return;
#ifdef CONFIG_32BIT
diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c
index 8f9165a..d15221b 100644
--- a/arch/sh/mm/pg-nommu.c
+++ b/arch/sh/mm/pg-nommu.c
@@ -14,23 +14,24 @@
#include <linux/string.h>
#include <asm/page.h>
-static void copy_page_nommu(void *to, void *from)
+void copy_page_nommu(void *to, void *from)
{
memcpy(to, from, PAGE_SIZE);
}
-static void clear_page_nommu(void *to)
+void clear_page_nommu(void *to)
{
memset(to, 0, PAGE_SIZE);
}
-static int __init pg_nommu_init(void)
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
{
- copy_page = copy_page_nommu;
- clear_page = clear_page_nommu;
-
+ memcpy(to, from, n);
return 0;
}
-subsys_initcall(pg_nommu_init);
-
+__kernel_size_t __clear_user(void *to, __kernel_size_t n)
+{
+ memset(to, 0, n);
+ return 0;
+}
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index c776b60..07371ed 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -2,7 +2,7 @@
* arch/sh/mm/pg-sh4.c
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2002 - 2005 Paul Mundt
*
* Released under the terms of the GNU GPL v2.0.
*/
@@ -23,6 +23,8 @@
extern struct semaphore p3map_sem[];
+#define CACHE_ALIAS (cpu_data->dcache.alias_mask)
+
/*
* clear_user_page
* @to: P1 address
@@ -35,14 +37,15 @@
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
clear_page(to);
else {
- pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
+ pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
_PAGE_RW | _PAGE_CACHABLE |
- _PAGE_DIRTY | _PAGE_ACCESSED |
+ _PAGE_DIRTY | _PAGE_ACCESSED |
_PAGE_HW_SHARED | _PAGE_FLAGS_HARD);
unsigned long phys_addr = PHYSADDR(to);
unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
- pgd_t *dir = pgd_offset_k(p3_addr);
- pmd_t *pmd = pmd_offset(dir, p3_addr);
+ pgd_t *pgd = pgd_offset_k(p3_addr);
+ pud_t *pud = pud_offset(pgd, p3_addr);
+ pmd_t *pmd = pmd_offset(pud, p3_addr);
pte_t *pte = pte_offset_kernel(pmd, p3_addr);
pte_t entry;
unsigned long flags;
@@ -67,21 +70,22 @@
* @address: U0 address to be mapped
* @page: page (virt_to_page(to))
*/
-void copy_user_page(void *to, void *from, unsigned long address,
+void copy_user_page(void *to, void *from, unsigned long address,
struct page *page)
{
__set_bit(PG_mapped, &page->flags);
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
copy_page(to, from);
else {
- pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
+ pgprot_t pgprot = __pgprot(_PAGE_PRESENT |
_PAGE_RW | _PAGE_CACHABLE |
- _PAGE_DIRTY | _PAGE_ACCESSED |
+ _PAGE_DIRTY | _PAGE_ACCESSED |
_PAGE_HW_SHARED | _PAGE_FLAGS_HARD);
unsigned long phys_addr = PHYSADDR(to);
unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS);
- pgd_t *dir = pgd_offset_k(p3_addr);
- pmd_t *pmd = pmd_offset(dir, p3_addr);
+ pgd_t *pgd = pgd_offset_k(p3_addr);
+ pud_t *pud = pud_offset(pgd, p3_addr);
+ pmd_t *pmd = pmd_offset(pud, p3_addr);
pte_t *pte = pte_offset_kernel(pmd, p3_addr);
pte_t entry;
unsigned long flags;
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
new file mode 100644
index 0000000..92e7453
--- /dev/null
+++ b/arch/sh/mm/pmb.c
@@ -0,0 +1,400 @@
+/*
+ * arch/sh/mm/pmb.c
+ *
+ * Privileged Space Mapping Buffer (PMB) Support.
+ *
+ * Copyright (C) 2005, 2006 Paul Mundt
+ *
+ * P1/P2 Section mapping definitions from map32.h, which was:
+ *
+ * Copyright 2003 (c) Lineo Solutions,Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+
+#define NR_PMB_ENTRIES 16
+
+static kmem_cache_t *pmb_cache;
+static unsigned long pmb_map;
+
+static struct pmb_entry pmb_init_map[] = {
+ /* vpn ppn flags (ub/sz/c/wt) */
+
+ /* P1 Section Mappings */
+ { 0x80000000, 0x00000000, PMB_SZ_64M | PMB_C, },
+ { 0x84000000, 0x04000000, PMB_SZ_64M | PMB_C, },
+ { 0x88000000, 0x08000000, PMB_SZ_128M | PMB_C, },
+ { 0x90000000, 0x10000000, PMB_SZ_64M | PMB_C, },
+ { 0x94000000, 0x14000000, PMB_SZ_64M | PMB_C, },
+ { 0x98000000, 0x18000000, PMB_SZ_64M | PMB_C, },
+
+ /* P2 Section Mappings */
+ { 0xa0000000, 0x00000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
+ { 0xa4000000, 0x04000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
+ { 0xa8000000, 0x08000000, PMB_UB | PMB_SZ_128M | PMB_WT, },
+ { 0xb0000000, 0x10000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
+ { 0xb4000000, 0x14000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
+ { 0xb8000000, 0x18000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
+};
+
+static inline unsigned long mk_pmb_entry(unsigned int entry)
+{
+ return (entry & PMB_E_MASK) << PMB_E_SHIFT;
+}
+
+static inline unsigned long mk_pmb_addr(unsigned int entry)
+{
+ return mk_pmb_entry(entry) | PMB_ADDR;
+}
+
+static inline unsigned long mk_pmb_data(unsigned int entry)
+{
+ return mk_pmb_entry(entry) | PMB_DATA;
+}
+
+struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+ unsigned long flags)
+{
+ struct pmb_entry *pmbe;
+
+ pmbe = kmem_cache_alloc(pmb_cache, GFP_KERNEL);
+ if (!pmbe)
+ return ERR_PTR(-ENOMEM);
+
+ pmbe->vpn = vpn;
+ pmbe->ppn = ppn;
+ pmbe->flags = flags;
+
+ return pmbe;
+}
+
+void pmb_free(struct pmb_entry *pmbe)
+{
+ kmem_cache_free(pmb_cache, pmbe);
+}
+
+/*
+ * Must be in P2 for __set_pmb_entry()
+ */
+int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+ unsigned long flags, int *entry)
+{
+ unsigned int pos = *entry;
+
+ if (unlikely(pos == PMB_NO_ENTRY))
+ pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
+
+repeat:
+ if (unlikely(pos > NR_PMB_ENTRIES))
+ return -ENOSPC;
+
+ if (test_and_set_bit(pos, &pmb_map)) {
+ pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
+ goto repeat;
+ }
+
+ ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
+
+#ifdef CONFIG_SH_WRITETHROUGH
+ /*
+ * When we are in 32-bit address extended mode, CCR.CB becomes
+ * invalid, so care must be taken to manually adjust cacheable
+ * translations.
+ */
+ if (likely(flags & PMB_C))
+ flags |= PMB_WT;
+#endif
+
+ ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos));
+
+ *entry = pos;
+
+ return 0;
+}
+
+int set_pmb_entry(struct pmb_entry *pmbe)
+{
+ int ret;
+
+ jump_to_P2();
+ ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry);
+ back_to_P1();
+
+ return ret;
+}
+
+void clear_pmb_entry(struct pmb_entry *pmbe)
+{
+ unsigned int entry = pmbe->entry;
+ unsigned long addr;
+
+ /*
+ * Don't allow clearing of wired init entries, P1 or P2 access
+ * without a corresponding mapping in the PMB will lead to reset
+ * by the TLB.
+ */
+ if (unlikely(entry < ARRAY_SIZE(pmb_init_map) ||
+ entry >= NR_PMB_ENTRIES))
+ return;
+
+ jump_to_P2();
+
+ /* Clear V-bit */
+ addr = mk_pmb_addr(entry);
+ ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
+
+ addr = mk_pmb_data(entry);
+ ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
+
+ back_to_P1();
+
+ clear_bit(entry, &pmb_map);
+}
+
+static DEFINE_SPINLOCK(pmb_list_lock);
+static struct pmb_entry *pmb_list;
+
+static inline void pmb_list_add(struct pmb_entry *pmbe)
+{
+ struct pmb_entry **p, *tmp;
+
+ p = &pmb_list;
+ while ((tmp = *p) != NULL)
+ p = &tmp->next;
+
+ pmbe->next = tmp;
+ *p = pmbe;
+}
+
+static inline void pmb_list_del(struct pmb_entry *pmbe)
+{
+ struct pmb_entry **p, *tmp;
+
+ for (p = &pmb_list; (tmp = *p); p = &tmp->next)
+ if (tmp == pmbe) {
+ *p = tmp->next;
+ return;
+ }
+}
+
+static struct {
+ unsigned long size;
+ int flag;
+} pmb_sizes[] = {
+ { .size = 0x20000000, .flag = PMB_SZ_512M, },
+ { .size = 0x08000000, .flag = PMB_SZ_128M, },
+ { .size = 0x04000000, .flag = PMB_SZ_64M, },
+ { .size = 0x01000000, .flag = PMB_SZ_16M, },
+};
+
+long pmb_remap(unsigned long vaddr, unsigned long phys,
+ unsigned long size, unsigned long flags)
+{
+ struct pmb_entry *pmbp;
+ unsigned long wanted;
+ int pmb_flags, i;
+
+ /* Convert typical pgprot value to the PMB equivalent */
+ if (flags & _PAGE_CACHABLE) {
+ if (flags & _PAGE_WT)
+ pmb_flags = PMB_WT;
+ else
+ pmb_flags = PMB_C;
+ } else
+ pmb_flags = PMB_WT | PMB_UB;
+
+ pmbp = NULL;
+ wanted = size;
+
+again:
+ for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
+ struct pmb_entry *pmbe;
+ int ret;
+
+ if (size < pmb_sizes[i].size)
+ continue;
+
+ pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
+ if (IS_ERR(pmbe))
+ return PTR_ERR(pmbe);
+
+ ret = set_pmb_entry(pmbe);
+ if (ret != 0) {
+ pmb_free(pmbe);
+ return -EBUSY;
+ }
+
+ phys += pmb_sizes[i].size;
+ vaddr += pmb_sizes[i].size;
+ size -= pmb_sizes[i].size;
+
+ /*
+ * Link adjacent entries that span multiple PMB entries
+ * for easier tear-down.
+ */
+ if (likely(pmbp))
+ pmbp->link = pmbe;
+
+ pmbp = pmbe;
+ }
+
+ if (size >= 0x1000000)
+ goto again;
+
+ return wanted - size;
+}
+
+void pmb_unmap(unsigned long addr)
+{
+ struct pmb_entry **p, *pmbe;
+
+ for (p = &pmb_list; (pmbe = *p); p = &pmbe->next)
+ if (pmbe->vpn == addr)
+ break;
+
+ if (unlikely(!pmbe))
+ return;
+
+ WARN_ON(!test_bit(pmbe->entry, &pmb_map));
+
+ do {
+ struct pmb_entry *pmblink = pmbe;
+
+ clear_pmb_entry(pmbe);
+ pmbe = pmblink->link;
+
+ pmb_free(pmblink);
+ } while (pmbe);
+}
+
+static void pmb_cache_ctor(void *pmb, kmem_cache_t *cachep, unsigned long flags)
+{
+ struct pmb_entry *pmbe = pmb;
+
+ memset(pmb, 0, sizeof(struct pmb_entry));
+
+ spin_lock_irq(&pmb_list_lock);
+
+ pmbe->entry = PMB_NO_ENTRY;
+ pmb_list_add(pmbe);
+
+ spin_unlock_irq(&pmb_list_lock);
+}
+
+static void pmb_cache_dtor(void *pmb, kmem_cache_t *cachep, unsigned long flags)
+{
+ spin_lock_irq(&pmb_list_lock);
+ pmb_list_del(pmb);
+ spin_unlock_irq(&pmb_list_lock);
+}
+
+static int __init pmb_init(void)
+{
+ unsigned int nr_entries = ARRAY_SIZE(pmb_init_map);
+ unsigned int entry;
+
+ BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES));
+
+ pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry),
+ 0, 0, pmb_cache_ctor, pmb_cache_dtor);
+ BUG_ON(!pmb_cache);
+
+ jump_to_P2();
+
+ /*
+ * Ordering is important, P2 must be mapped in the PMB before we
+ * can set PMB.SE, and P1 must be mapped before we jump back to
+ * P1 space.
+ */
+ for (entry = 0; entry < nr_entries; entry++) {
+ struct pmb_entry *pmbe = pmb_init_map + entry;
+
+ __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &entry);
+ }
+
+ ctrl_outl(0, PMB_IRMCR);
+
+ /* PMB.SE and UB[7] */
+ ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR);
+
+ back_to_P1();
+
+ return 0;
+}
+arch_initcall(pmb_init);
+
+static int pmb_seq_show(struct seq_file *file, void *iter)
+{
+ int i;
+
+ seq_printf(file, "V: Valid, C: Cacheable, WT: Write-Through\n"
+ "CB: Copy-Back, B: Buffered, UB: Unbuffered\n");
+ seq_printf(file, "ety vpn ppn size flags\n");
+
+ for (i = 0; i < NR_PMB_ENTRIES; i++) {
+ unsigned long addr, data;
+ unsigned int size;
+ char *sz_str = NULL;
+
+ addr = ctrl_inl(mk_pmb_addr(i));
+ data = ctrl_inl(mk_pmb_data(i));
+
+ size = data & PMB_SZ_MASK;
+ sz_str = (size == PMB_SZ_16M) ? " 16MB":
+ (size == PMB_SZ_64M) ? " 64MB":
+ (size == PMB_SZ_128M) ? "128MB":
+ "512MB";
+
+ /* 02: V 0x88 0x08 128MB C CB B */
+ seq_printf(file, "%02d: %c 0x%02lx 0x%02lx %s %c %s %s\n",
+ i, ((addr & PMB_V) && (data & PMB_V)) ? 'V' : ' ',
+ (addr >> 24) & 0xff, (data >> 24) & 0xff,
+ sz_str, (data & PMB_C) ? 'C' : ' ',
+ (data & PMB_WT) ? "WT" : "CB",
+ (data & PMB_UB) ? "UB" : " B");
+ }
+
+ return 0;
+}
+
+static int pmb_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmb_seq_show, NULL);
+}
+
+static struct file_operations pmb_debugfs_fops = {
+ .owner = THIS_MODULE,
+ .open = pmb_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __init pmb_debugfs_init(void)
+{
+ struct dentry *dentry;
+
+ dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO,
+ NULL, NULL, &pmb_debugfs_fops);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+
+ return 0;
+}
+postcore_initcall(pmb_debugfs_init);
diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c
new file mode 100644
index 0000000..73ec7f6
--- /dev/null
+++ b/arch/sh/mm/tlb-flush.c
@@ -0,0 +1,134 @@
+/*
+ * TLB flushing operations for SH with an MMU.
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+ if (vma->vm_mm && vma->vm_mm->context.id != NO_CONTEXT) {
+ unsigned long flags;
+ unsigned long asid;
+ unsigned long saved_asid = MMU_NO_ASID;
+
+ asid = vma->vm_mm->context.id & MMU_CONTEXT_ASID_MASK;
+ page &= PAGE_MASK;
+
+ local_irq_save(flags);
+ if (vma->vm_mm != current->mm) {
+ saved_asid = get_asid();
+ set_asid(asid);
+ }
+ __flush_tlb_page(asid, page);
+ if (saved_asid != MMU_NO_ASID)
+ set_asid(saved_asid);
+ local_irq_restore(flags);
+ }
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ struct mm_struct *mm = vma->vm_mm;
+
+ if (mm->context.id != NO_CONTEXT) {
+ unsigned long flags;
+ int size;
+
+ local_irq_save(flags);
+ size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+ if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
+ mm->context.id = NO_CONTEXT;
+ if (mm == current->mm)
+ activate_context(mm);
+ } else {
+ unsigned long asid;
+ unsigned long saved_asid = MMU_NO_ASID;
+
+ asid = mm->context.id & MMU_CONTEXT_ASID_MASK;
+ start &= PAGE_MASK;
+ end += (PAGE_SIZE - 1);
+ end &= PAGE_MASK;
+ if (mm != current->mm) {
+ saved_asid = get_asid();
+ set_asid(asid);
+ }
+ while (start < end) {
+ __flush_tlb_page(asid, start);
+ start += PAGE_SIZE;
+ }
+ if (saved_asid != MMU_NO_ASID)
+ set_asid(saved_asid);
+ }
+ local_irq_restore(flags);
+ }
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ unsigned long flags;
+ int size;
+
+ local_irq_save(flags);
+ size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+ if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */
+ flush_tlb_all();
+ } else {
+ unsigned long asid;
+ unsigned long saved_asid = get_asid();
+
+ asid = init_mm.context.id & MMU_CONTEXT_ASID_MASK;
+ start &= PAGE_MASK;
+ end += (PAGE_SIZE - 1);
+ end &= PAGE_MASK;
+ set_asid(asid);
+ while (start < end) {
+ __flush_tlb_page(asid, start);
+ start += PAGE_SIZE;
+ }
+ set_asid(saved_asid);
+ }
+ local_irq_restore(flags);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ /* Invalidate all TLB of this process. */
+ /* Instead of invalidating each TLB, we get new MMU context. */
+ if (mm->context.id != NO_CONTEXT) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ mm->context.id = NO_CONTEXT;
+ if (mm == current->mm)
+ activate_context(mm);
+ local_irq_restore(flags);
+ }
+}
+
+void flush_tlb_all(void)
+{
+ unsigned long flags, status;
+
+ /*
+ * Flush all the TLB.
+ *
+ * Write to the MMU control register's bit:
+ * TF-bit for SH-3, TI-bit for SH-4.
+ * It's same position, bit #2.
+ */
+ local_irq_save(flags);
+ status = ctrl_inl(MMUCR);
+ status |= 0x04;
+ ctrl_outl(status, MMUCR);
+ ctrl_barrier();
+ local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index 115b1b6..812b2d5 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -36,7 +36,6 @@
unsigned long vpn;
struct page *page;
unsigned long pfn;
- unsigned long ptea;
/* Ptrace may call this routine. */
if (vma && current->active_mm != vma->vm_mm)
@@ -59,10 +58,11 @@
ctrl_outl(vpn, MMU_PTEH);
pteval = pte_val(pte);
+
/* Set PTEA register */
- /* TODO: make this look less hacky */
- ptea = ((pteval >> 28) & 0xe) | (pteval & 0x1);
- ctrl_outl(ptea, MMU_PTEA);
+ if (cpu_data->flags & CPU_HAS_PTEA)
+ /* TODO: make this look less hacky */
+ ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
/* Set PTEL register */
pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
index 686738d..1f25d9b 100644
--- a/arch/sh/oprofile/Makefile
+++ b/arch/sh/oprofile/Makefile
@@ -7,7 +7,11 @@
timer_int.o )
profdrvr-y := op_model_null.o
+
+# SH7750-style performance counters exist across 7750/7750S and 7091.
+profdrvr-$(CONFIG_CPU_SUBTYPE_SH7750S) := op_model_sh7750.o
profdrvr-$(CONFIG_CPU_SUBTYPE_SH7750) := op_model_sh7750.o
+profdrvr-$(CONFIG_CPU_SUBTYPE_SH7091) := op_model_sh7750.o
oprofile-y := $(DRIVER_OBJS) $(profdrvr-y)
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 182fe90..ac57638 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -8,16 +8,15 @@
SE SH_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7300SE SH_7300_SOLUTION_ENGINE
+7343SE SH_7343_SOLUTION_ENGINE
73180SE SH_73180_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
HD64461 HD64461
HD64465 HD64465
-SH2000 SH_SH2000
SATURN SH_SATURN
DREAMCAST SH_DREAMCAST
BIGSUR SH_BIGSUR
-ADX SH_ADX
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
HS7751RVOIP SH_HS7751RVOIP
@@ -25,4 +24,9 @@
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV
SH03 SH_SH03
-
+LANDISK SH_LANDISK
+R7780RP SH_R7780RP
+R7780MP SH_R7780MP
+TITAN SH_TITAN
+SHMIN SH_SHMIN
+7710VOIPGW SH_7710VOIPGW
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 51cf602..0fbdaa5 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
-# Sat Sep 23 18:32:19 2006
+# Tue Sep 26 23:09:35 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@@ -141,6 +141,7 @@
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
@@ -194,21 +195,9 @@
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-CONFIG_TCP_CONG_ADVANCED=y
-
-#
-# TCP congestion control
-#
-CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
@@ -247,6 +236,7 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
+# CONFIG_NET_DCCPPROBE is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -401,6 +391,7 @@
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
@@ -422,12 +413,13 @@
# CONFIG_SCSI_LOGGING is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
@@ -440,16 +432,18 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -462,6 +456,11 @@
# CONFIG_SCSI_SUNESP is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
@@ -575,6 +574,7 @@
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
@@ -1006,6 +1006,7 @@
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
@@ -1353,6 +1354,7 @@
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index c88ae23..69444f2 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -1016,7 +1016,7 @@
asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
{
-#ifndef CONFIG_SYSCTL
+#ifndef CONFIG_SYSCTL_SYSCALL
return -ENOSYS;
#else
struct __sysctl_args32 tmp;
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index dcba4e6..09cb7fc 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -920,8 +920,7 @@
if (sparc_ramdisk_image || sparc_ramdisk_image64) {
unsigned long ramdisk_image = sparc_ramdisk_image ?
sparc_ramdisk_image : sparc_ramdisk_image64;
- if (ramdisk_image >= (unsigned long)_end - 2 * PAGE_SIZE)
- ramdisk_image -= KERNBASE;
+ ramdisk_image -= KERNBASE;
initrd_start = ramdisk_image + phys_base;
initrd_end = initrd_start + sparc_ramdisk_size;
if (initrd_end > end_of_phys_memory) {
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
index 9558a7c..11154b6 100644
--- a/arch/um/Makefile-x86_64
+++ b/arch/um/Makefile-x86_64
@@ -4,10 +4,13 @@
core-y += arch/um/sys-x86_64/
START := 0x60000000
+_extra_flags_ = -fno-builtin -m64 -mcmodel=kernel
+
#We #undef __x86_64__ for kernelspace, not for userspace where
#it's needed for headers to work!
-CFLAGS += -U__$(SUBARCH)__ -fno-builtin -m64
-USER_CFLAGS += -fno-builtin -m64
+CFLAGS += -U__$(SUBARCH)__ $(_extra_flags_)
+USER_CFLAGS += $(_extra_flags_)
+
CHECKFLAGS += -m64
AFLAGS += -m64
LDFLAGS += -m elf_x86_64
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index e82764f..3576b3c 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -110,7 +110,7 @@
"UML\n");
}
-static struct chan_ops not_configged_ops = {
+static const struct chan_ops not_configged_ops = {
.init = not_configged_init,
.open = not_configged_open,
.close = not_configged_close,
@@ -373,7 +373,7 @@
}
int console_open_chan(struct line *line, struct console *co,
- struct chan_opts *opts)
+ const struct chan_opts *opts)
{
int err;
@@ -494,10 +494,10 @@
struct chan_type {
char *key;
- struct chan_ops *ops;
+ const struct chan_ops *ops;
};
-static struct chan_type chan_table[] = {
+static const struct chan_type chan_table[] = {
{ "fd", &fd_ops },
#ifdef CONFIG_NULL_CHAN
@@ -534,10 +534,10 @@
};
static struct chan *parse_chan(struct line *line, char *str, int device,
- struct chan_opts *opts)
+ const struct chan_opts *opts)
{
- struct chan_type *entry;
- struct chan_ops *ops;
+ const struct chan_type *entry;
+ const struct chan_ops *ops;
struct chan *chan;
void *data;
int i;
@@ -582,7 +582,7 @@
}
int parse_chan_pair(char *str, struct line *line, int device,
- struct chan_opts *opts)
+ const struct chan_opts *opts)
{
struct list_head *chans = &line->chan_list;
struct chan *new, *chan;
diff --git a/arch/um/drivers/daemon.h b/arch/um/drivers/daemon.h
index 7326c42..3bc3cf6 100644
--- a/arch/um/drivers/daemon.h
+++ b/arch/um/drivers/daemon.h
@@ -18,7 +18,7 @@
void *dev;
};
-extern struct net_user_info daemon_user_info;
+extern const struct net_user_info daemon_user_info;
extern int daemon_user_write(int fd, void *buf, int len,
struct daemon_data *pri);
diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c
index 53d09ed..8243869 100644
--- a/arch/um/drivers/daemon_kern.c
+++ b/arch/um/drivers/daemon_kern.c
@@ -57,7 +57,7 @@
(struct daemon_data *) &lp->user));
}
-static struct net_kern_info daemon_kern_info = {
+static const struct net_kern_info daemon_kern_info = {
.init = daemon_init,
.protocol = eth_protocol,
.read = daemon_read,
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index c944265..77954ea 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -182,7 +182,7 @@
return(mtu);
}
-struct net_user_info daemon_user_info = {
+const struct net_user_info daemon_user_info = {
.init = daemon_user_init,
.open = daemon_open,
.close = NULL,
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index c41f75e..108b7da 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -20,7 +20,7 @@
char str[sizeof("1234567890\0")];
};
-static void *fd_init(char *str, int device, struct chan_opts *opts)
+static void *fd_init(char *str, int device, const struct chan_opts *opts)
{
struct fd_chan *data;
char *end;
@@ -77,7 +77,7 @@
}
}
-struct chan_ops fd_ops = {
+const struct chan_ops fd_ops = {
.type = "fd",
.init = fd_init,
.open = fd_open,
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index 37232f9..d247ef4 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -280,7 +280,7 @@
/* kernel module operations */
-static struct file_operations hostaudio_fops = {
+static const struct file_operations hostaudio_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = hostaudio_read,
@@ -292,7 +292,7 @@
.release = hostaudio_release,
};
-static struct file_operations hostmixer_fops = {
+static const struct file_operations hostmixer_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.ioctl = hostmixer_ioctl_mixdev,
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index ebebaab..563ce76 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -251,7 +251,7 @@
/* nothing */
}
-static struct {
+static const struct {
int cmd;
char *level;
char *name;
@@ -405,7 +405,7 @@
int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
{
- struct line_driver *driver = line->driver;
+ const struct line_driver *driver = line->driver;
int err = 0, flags = IRQF_DISABLED | IRQF_SHARED | IRQF_SAMPLE_RANDOM;
if (input)
@@ -558,7 +558,7 @@
}
int line_config(struct line *lines, unsigned int num, char *str,
- struct chan_opts *opts)
+ const struct chan_opts *opts)
{
struct line *line;
char *new;
diff --git a/arch/um/drivers/mcast.h b/arch/um/drivers/mcast.h
index a2c6db2..bc56af9 100644
--- a/arch/um/drivers/mcast.h
+++ b/arch/um/drivers/mcast.h
@@ -13,7 +13,7 @@
void *dev;
};
-extern struct net_user_info mcast_user_info;
+extern const struct net_user_info mcast_user_info;
extern int mcast_user_write(int fd, void *buf, int len,
struct mcast_data *pri);
diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c
index 3a7af18..c090fbd 100644
--- a/arch/um/drivers/mcast_kern.c
+++ b/arch/um/drivers/mcast_kern.c
@@ -61,7 +61,7 @@
(struct mcast_data *) &lp->user);
}
-static struct net_kern_info mcast_kern_info = {
+static const struct net_kern_info mcast_kern_info = {
.init = mcast_init,
.protocol = eth_protocol,
.read = mcast_read,
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index afe85bf..4d2bd39 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -152,7 +152,7 @@
return(mtu);
}
-struct net_user_info mcast_user_info = {
+const struct net_user_info mcast_user_info = {
.init = mcast_user_init,
.open = mcast_open,
.close = mcast_close,
diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c
index 022f67b..9a3b5da 100644
--- a/arch/um/drivers/mmapper_kern.c
+++ b/arch/um/drivers/mmapper_kern.c
@@ -85,7 +85,7 @@
return 0;
}
-static struct file_operations mmapper_fops = {
+static const struct file_operations mmapper_fops = {
.owner = THIS_MODULE,
.read = mmapper_read,
.write = mmapper_write,
@@ -95,7 +95,7 @@
.release = mmapper_release,
};
-static struct miscdevice mmapper_dev = {
+static const struct miscdevice mmapper_dev = {
.minor = MISC_DYNAMIC_MINOR,
.name = "mmapper",
.fops = &mmapper_fops
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 4a7966b..664c2e2 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -114,8 +114,6 @@
struct uml_net_private *lp = dev->priv;
int err;
- spin_lock(&lp->lock);
-
if(lp->fd >= 0){
err = -ENXIO;
goto out;
@@ -149,8 +147,6 @@
*/
while((err = uml_net_rx(dev)) > 0) ;
- spin_unlock(&lp->lock);
-
spin_lock(&opened_lock);
list_add(&lp->list, &opened);
spin_unlock(&opened_lock);
@@ -160,7 +156,6 @@
if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user);
lp->fd = -1;
out:
- spin_unlock(&lp->lock);
return err;
}
@@ -169,15 +164,12 @@
struct uml_net_private *lp = dev->priv;
netif_stop_queue(dev);
- spin_lock(&lp->lock);
free_irq(dev->irq, dev);
if(lp->close != NULL)
(*lp->close)(lp->fd, &lp->user);
lp->fd = -1;
- spin_unlock(&lp->lock);
-
spin_lock(&opened_lock);
list_del(&lp->list);
spin_unlock(&opened_lock);
@@ -246,9 +238,9 @@
struct uml_net_private *lp = dev->priv;
struct sockaddr *hwaddr = addr;
- spin_lock(&lp->lock);
+ spin_lock_irq(&lp->lock);
set_ether_mac(dev, hwaddr->sa_data);
- spin_unlock(&lp->lock);
+ spin_unlock_irq(&lp->lock);
return(0);
}
@@ -258,7 +250,7 @@
struct uml_net_private *lp = dev->priv;
int err = 0;
- spin_lock(&lp->lock);
+ spin_lock_irq(&lp->lock);
new_mtu = (*lp->set_mtu)(new_mtu, &lp->user);
if(new_mtu < 0){
@@ -269,7 +261,7 @@
dev->mtu = new_mtu;
out:
- spin_unlock(&lp->lock);
+ spin_unlock_irq(&lp->lock);
return err;
}
@@ -569,12 +561,13 @@
int n, err;
err = eth_parse(str, &n, &str);
- if(err) return(1);
+ if(err)
+ return 1;
- new = alloc_bootmem(sizeof(new));
+ new = alloc_bootmem(sizeof(*new));
if (new == NULL){
printk("eth_init : alloc_bootmem failed\n");
- return(1);
+ return 1;
}
INIT_LIST_HEAD(&new->list);
@@ -582,7 +575,7 @@
new->init = str;
list_add_tail(&new->list, ð_cmd_line);
- return(1);
+ return 1;
}
__setup("eth", eth_setup);
diff --git a/arch/um/drivers/null.c b/arch/um/drivers/null.c
index 14cc5f7..3683ed4 100644
--- a/arch/um/drivers/null.c
+++ b/arch/um/drivers/null.c
@@ -10,7 +10,7 @@
static int null_chan;
-static void *null_init(char *str, int device, struct chan_opts *opts)
+static void *null_init(char *str, int device, const struct chan_opts *opts)
{
return(&null_chan);
}
@@ -31,7 +31,7 @@
{
}
-struct chan_ops null_ops = {
+const struct chan_ops null_ops = {
.type = "null",
.init = null_init,
.open = null_open,
diff --git a/arch/um/drivers/pcap_kern.c b/arch/um/drivers/pcap_kern.c
index 4c767c7..6e1ef85 100644
--- a/arch/um/drivers/pcap_kern.c
+++ b/arch/um/drivers/pcap_kern.c
@@ -46,7 +46,7 @@
return(-EPERM);
}
-static struct net_kern_info pcap_kern_info = {
+static const struct net_kern_info pcap_kern_info = {
.init = pcap_init,
.protocol = eth_protocol,
.read = pcap_read,
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index edfcb29..2ef641d 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -120,7 +120,7 @@
return(hdata.len);
}
-struct net_user_info pcap_user_info = {
+const struct net_user_info pcap_user_info = {
.init = pcap_user_init,
.open = pcap_open,
.close = NULL,
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index c43e8bb..f2e8fc4 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -27,7 +27,7 @@
char dev[sizeof("32768\0")];
};
-static void *port_init(char *str, int device, struct chan_opts *opts)
+static void *port_init(char *str, int device, const struct chan_opts *opts)
{
struct port_chan *data;
void *kern_data;
@@ -100,7 +100,7 @@
os_close_file(fd);
}
-struct chan_ops port_ops = {
+const struct chan_ops port_ops = {
.type = "port",
.init = port_init,
.open = port_open,
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 1c555c3..abec620 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -22,7 +22,7 @@
char dev_name[sizeof("/dev/pts/0123456\0")];
};
-static void *pty_chan_init(char *str, int device, struct chan_opts *opts)
+static void *pty_chan_init(char *str, int device, const struct chan_opts *opts)
{
struct pty_chan *data;
@@ -118,7 +118,7 @@
return(fd);
}
-struct chan_ops pty_ops = {
+const struct chan_ops pty_ops = {
.type = "pty",
.init = pty_chan_init,
.open = pty_open,
@@ -131,7 +131,7 @@
.winch = 0,
};
-struct chan_ops pts_ops = {
+const struct chan_ops pts_ops = {
.type = "pts",
.init = pty_chan_init,
.open = pts_open,
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index ba471f5..ae99094 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -68,7 +68,7 @@
return ret;
}
-static struct file_operations rng_chrdev_ops = {
+static const struct file_operations rng_chrdev_ops = {
.owner = THIS_MODULE,
.open = rng_dev_open,
.read = rng_dev_read,
diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h
index bb0dab4..c64f8c6 100644
--- a/arch/um/drivers/slip.h
+++ b/arch/um/drivers/slip.h
@@ -12,7 +12,7 @@
struct slip_proto slip;
};
-extern struct net_user_info slip_user_info;
+extern const struct net_user_info slip_user_info;
extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri);
extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri);
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 163ee0d..ccea2d7 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -61,7 +61,7 @@
(struct slip_data *) &lp->user));
}
-struct net_kern_info slip_kern_info = {
+const struct net_kern_info slip_kern_info = {
.init = slip_init,
.protocol = slip_protocol,
.read = slip_read,
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 89fbec1..8460285 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -241,7 +241,7 @@
close_addr(addr, netmask, pri->name);
}
-struct net_user_info slip_user_info = {
+const struct net_user_info slip_user_info = {
.init = slip_user_init,
.open = slip_open,
.close = slip_close,
diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h
index 6cf88ab..89ccf83 100644
--- a/arch/um/drivers/slirp.h
+++ b/arch/um/drivers/slirp.h
@@ -24,7 +24,7 @@
struct slip_proto slip;
};
-extern struct net_user_info slirp_user_info;
+extern const struct net_user_info slirp_user_info;
extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri);
extern int slirp_user_write(int fd, void *buf, int len,
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index 95e50c9..ae322e1 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -64,7 +64,7 @@
(struct slirp_data *) &lp->user));
}
-struct net_kern_info slirp_kern_info = {
+const struct net_kern_info slirp_kern_info = {
.init = slirp_init,
.protocol = slirp_protocol,
.read = slirp_read,
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index 33c5f6e..ce5e85d 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -126,7 +126,7 @@
return(mtu);
}
-struct net_user_info slirp_user_info = {
+const struct net_user_info slirp_user_info = {
.init = slirp_user_init,
.open = slirp_open,
.close = slirp_close,
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index 6dafd6f..6f13e7c 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -23,7 +23,7 @@
#include "irq_user.h"
#include "mconsole_kern.h"
-static int ssl_version = 1;
+static const int ssl_version = 1;
/* Referenced only by tty_driver below - presumably it's locked correctly
* by the tty driver.
@@ -123,7 +123,7 @@
}
#endif
-static struct tty_operations ssl_ops = {
+static const struct tty_operations ssl_ops = {
.open = ssl_open,
.close = line_close,
.write = line_write,
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 856f568..5e44adb 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -110,7 +110,7 @@
static int con_init_done = 0;
-static struct tty_operations console_ops = {
+static const struct tty_operations console_ops = {
.open = con_open,
.close = line_close,
.write = line_write,
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index 9f70edf..11de3ac 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -18,7 +18,7 @@
struct termios tt;
};
-static void *tty_chan_init(char *str, int device, struct chan_opts *opts)
+static void *tty_chan_init(char *str, int device, const struct chan_opts *opts)
{
struct tty_chan *data;
@@ -62,7 +62,7 @@
return fd;
}
-struct chan_ops tty_ops = {
+const struct chan_ops tty_ops = {
.type = "tty",
.init = tty_chan_init,
.open = tty_open,
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index aaa63666..386f8b9 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -31,7 +31,7 @@
};
/* Not static because it's called directly by the tt mode gdb code */
-void *xterm_init(char *str, int device, struct chan_opts *opts)
+void *xterm_init(char *str, int device, const struct chan_opts *opts)
{
struct xterm_chan *data;
@@ -194,7 +194,7 @@
free(d);
}
-struct chan_ops xterm_ops = {
+const struct chan_ops xterm_ops = {
.type = "xterm",
.init = xterm_init,
.open = xterm_open,
diff --git a/arch/um/include/chan_kern.h b/arch/um/include/chan_kern.h
index 1bb5e9d..572d286 100644
--- a/arch/um/include/chan_kern.h
+++ b/arch/um/include/chan_kern.h
@@ -23,21 +23,21 @@
unsigned int opened:1;
unsigned int enabled:1;
int fd;
- struct chan_ops *ops;
+ const struct chan_ops *ops;
void *data;
};
extern void chan_interrupt(struct list_head *chans, struct work_struct *task,
struct tty_struct *tty, int irq);
extern int parse_chan_pair(char *str, struct line *line, int device,
- struct chan_opts *opts);
+ const struct chan_opts *opts);
extern int open_chan(struct list_head *chans);
extern int write_chan(struct list_head *chans, const char *buf, int len,
int write_irq);
extern int console_write_chan(struct list_head *chans, const char *buf,
int len);
extern int console_open_chan(struct line *line, struct console *co,
- struct chan_opts *opts);
+ const struct chan_opts *opts);
extern void deactivate_chan(struct list_head *chans, int irq);
extern void reactivate_chan(struct list_head *chans, int irq);
extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty);
diff --git a/arch/um/include/chan_user.h b/arch/um/include/chan_user.h
index 659bb3c..a795547 100644
--- a/arch/um/include/chan_user.h
+++ b/arch/um/include/chan_user.h
@@ -20,7 +20,7 @@
struct chan_ops {
char *type;
- void *(*init)(char *, int, struct chan_opts *);
+ void *(*init)(char *, int, const struct chan_opts *);
int (*open)(int, int, int, void *, char **);
void (*close)(int, void *);
int (*read)(int, char *, void *);
@@ -31,8 +31,8 @@
int winch;
};
-extern struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops, tty_ops,
- xterm_ops;
+extern const struct chan_ops fd_ops, null_ops, port_ops, pts_ops, pty_ops,
+ tty_ops, xterm_ops;
extern void generic_close(int fd, void *unused);
extern int generic_read(int fd, char *c_out, void *unused);
diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h
index 89e1dc8..59cfa9e 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@@ -21,7 +21,7 @@
kern_hndl timer_handler;
};
-extern struct kern_handlers handlinfo_kern;
+extern const struct kern_handlers handlinfo_kern;
extern int ncpus;
extern char *linux_prog;
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 27bf2f6..642c9a0 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -52,7 +52,7 @@
int sigio;
struct work_struct task;
- struct line_driver *driver;
+ const struct line_driver *driver;
int have_irq;
};
@@ -99,7 +99,7 @@
extern void close_lines(struct line *lines, int nlines);
extern int line_config(struct line *lines, unsigned int sizeof_lines,
- char *str, struct chan_opts *opts);
+ char *str, const struct chan_opts *opts);
extern int line_id(char **str, int *start_out, int *end_out);
extern int line_remove(struct line *lines, unsigned int sizeof_lines, int n);
extern int line_get_config(char *dev, struct line *lines,
diff --git a/arch/um/include/net_kern.h b/arch/um/include/net_kern.h
index f7de6df..769fba4 100644
--- a/arch/um/include/net_kern.h
+++ b/arch/um/include/net_kern.h
@@ -54,8 +54,8 @@
struct list_head list;
char *name;
int (*setup)(char *, char **, void *);
- struct net_user_info *user;
- struct net_kern_info *kern;
+ const struct net_user_info *user;
+ const struct net_kern_info *kern;
int private_size;
int setup_size;
};
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 24fb6d8..120ca21 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -14,6 +14,7 @@
#include "skas/mm_id.h"
#include "irq_user.h"
#include "sysdep/tls.h"
+#include "sysdep/archsetjmp.h"
#define OS_TYPE_FILE 1
#define OS_TYPE_DIR 2
@@ -198,7 +199,9 @@
extern int os_getpid(void);
extern int os_getpgrp(void);
+#ifdef UML_CONFIG_MODE_TT
extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
+#endif
extern void init_new_thread_signals(void);
extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr);
@@ -216,7 +219,6 @@
*/
extern void forward_ipi(int fd, int pid);
extern void kill_child_dead(int pid);
-extern void stop(void);
extern int wait_for_stop(int pid, int sig, int cont_type, void *relay);
extern int protect_memory(unsigned long addr, unsigned long len,
int r, int w, int x, int must_succeed);
@@ -307,12 +309,9 @@
extern void userspace(union uml_pt_regs *regs);
extern void map_stub_pages(int fd, unsigned long code,
unsigned long data, unsigned long stack);
-extern void new_thread(void *stack, void **switch_buf_ptr,
- void **fork_buf_ptr, void (*handler)(int));
-extern void thread_wait(void *sw, void *fb);
-extern void switch_threads(void *me, void *next);
-extern int start_idle_thread(void *stack, void *switch_buf_ptr,
- void **fork_buf_ptr);
+extern void new_thread(void *stack, jmp_buf *buf, void (*handler)(void));
+extern void switch_threads(jmp_buf *me, jmp_buf *you);
+extern int start_idle_thread(void *stack, jmp_buf *switch_buf);
extern void initial_thread_cb_skas(void (*proc)(void *),
void *arg);
extern void halt_skas(void);
diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h
index 853b26f..e88926b 100644
--- a/arch/um/include/skas/skas.h
+++ b/arch/um/include/skas/skas.h
@@ -14,8 +14,7 @@
extern int skas_needs_stub;
extern int user_thread(unsigned long stack, int flags);
-extern void new_thread_proc(void *stack, void (*handler)(int sig));
-extern void new_thread_handler(int sig);
+extern void new_thread_handler(void);
extern void handle_syscall(union uml_pt_regs *regs);
extern int new_mm(unsigned long stack);
extern void get_skas_faultinfo(int pid, struct faultinfo * fi);
diff --git a/arch/um/include/sysdep-i386/archsetjmp.h b/arch/um/include/sysdep-i386/archsetjmp.h
index ea1ba3d..11bafab 100644
--- a/arch/um/include/sysdep-i386/archsetjmp.h
+++ b/arch/um/include/sysdep-i386/archsetjmp.h
@@ -16,4 +16,7 @@
typedef struct __jmp_buf jmp_buf[1];
+#define JB_IP __eip
+#define JB_SP __esp
+
#endif /* _SETJMP_H */
diff --git a/arch/um/include/sysdep-x86_64/archsetjmp.h b/arch/um/include/sysdep-x86_64/archsetjmp.h
index 454fc60..9a5e1a6 100644
--- a/arch/um/include/sysdep-x86_64/archsetjmp.h
+++ b/arch/um/include/sysdep-x86_64/archsetjmp.h
@@ -18,4 +18,7 @@
typedef struct __jmp_buf jmp_buf[1];
+#define JB_IP __rip
+#define JB_SP __rsp
+
#endif /* _SETJMP_H */
diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
index 8d353f0..617bb9ef 100644
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ b/arch/um/include/sysdep-x86_64/ptrace.h
@@ -50,6 +50,21 @@
#define HOST_FS 25
#define HOST_GS 26
+/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these
+ * are already defined for kernel code, but not for userspace code.
+ */
+#ifndef FS_BASE
+/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
+ * which is what x86_64 ptrace actually uses.
+ */
+#define FS_BASE (HOST_FS_BASE * sizeof(long))
+#define GS_BASE (HOST_GS_BASE * sizeof(long))
+#define DS (HOST_DS * sizeof(long))
+#define ES (HOST_ES * sizeof(long))
+#define FS (HOST_FS * sizeof(long))
+#define GS (HOST_GS * sizeof(long))
+#endif
+
#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
#define REGS_DS(r) ((r)[HOST_DS])
@@ -89,9 +104,12 @@
#endif
#ifdef UML_CONFIG_MODE_SKAS
struct skas_regs {
- /* XXX */
- unsigned long regs[27];
- unsigned long fp[65];
+ /* x86_64 ptrace uses sizeof(user_regs_struct) as its register
+ * file size, while i386 uses FRAME_SIZE. Therefore, we need
+ * to use UM_FRAME_SIZE here instead of HOST_FRAME_SIZE.
+ */
+ unsigned long regs[UM_FRAME_SIZE];
+ unsigned long fp[HOST_FP_SIZE];
struct faultinfo faultinfo;
long syscall;
int is_user;
@@ -120,11 +138,16 @@
#define UPT_R14(r) __CHOOSE_MODE(SC_R14(UPT_SC(r)), REGS_R14((r)->skas.regs))
#define UPT_R15(r) __CHOOSE_MODE(SC_R15(UPT_SC(r)), REGS_R15((r)->skas.regs))
#define UPT_CS(r) __CHOOSE_MODE(SC_CS(UPT_SC(r)), REGS_CS((r)->skas.regs))
+#define UPT_FS_BASE(r) \
+ __CHOOSE_MODE(SC_FS_BASE(UPT_SC(r)), REGS_FS_BASE((r)->skas.regs))
#define UPT_FS(r) __CHOOSE_MODE(SC_FS(UPT_SC(r)), REGS_FS((r)->skas.regs))
+#define UPT_GS_BASE(r) \
+ __CHOOSE_MODE(SC_GS_BASE(UPT_SC(r)), REGS_GS_BASE((r)->skas.regs))
#define UPT_GS(r) __CHOOSE_MODE(SC_GS(UPT_SC(r)), REGS_GS((r)->skas.regs))
#define UPT_DS(r) __CHOOSE_MODE(SC_DS(UPT_SC(r)), REGS_DS((r)->skas.regs))
#define UPT_ES(r) __CHOOSE_MODE(SC_ES(UPT_SC(r)), REGS_ES((r)->skas.regs))
#define UPT_CS(r) __CHOOSE_MODE(SC_CS(UPT_SC(r)), REGS_CS((r)->skas.regs))
+#define UPT_SS(r) __CHOOSE_MODE(SC_SS(UPT_SC(r)), REGS_SS((r)->skas.regs))
#define UPT_ORIG_RAX(r) \
__CHOOSE_MODE((r)->tt.orig_rax, REGS_ORIG_RAX((r)->skas.regs))
@@ -183,6 +206,13 @@
case RBP: val = UPT_RBP(regs); break; \
case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
case CS: val = UPT_CS(regs); break; \
+ case SS: val = UPT_SS(regs); break; \
+ case FS_BASE: val = UPT_FS_BASE(regs); break; \
+ case GS_BASE: val = UPT_GS_BASE(regs); break; \
+ case DS: val = UPT_DS(regs); break; \
+ case ES: val = UPT_ES(regs); break; \
+ case FS : val = UPT_FS (regs); break; \
+ case GS: val = UPT_GS(regs); break; \
case EFLAGS: val = UPT_EFLAGS(regs); break; \
default : \
panic("Bad register in UPT_REG : %d\n", reg); \
@@ -214,6 +244,13 @@
case RBP: UPT_RBP(regs) = __upt_val; break; \
case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
case CS: UPT_CS(regs) = __upt_val; break; \
+ case SS: UPT_SS(regs) = __upt_val; break; \
+ case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break; \
+ case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break; \
+ case DS: UPT_DS(regs) = __upt_val; break; \
+ case ES: UPT_ES(regs) = __upt_val; break; \
+ case FS: UPT_FS(regs) = __upt_val; break; \
+ case GS: UPT_GS(regs) = __upt_val; break; \
case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
default : \
panic("Bad register in UPT_SET : %d\n", reg); \
diff --git a/arch/um/include/sysdep-x86_64/sc.h b/arch/um/include/sysdep-x86_64/sc.h
index a160d9f..8aee45b 100644
--- a/arch/um/include/sysdep-x86_64/sc.h
+++ b/arch/um/include/sysdep-x86_64/sc.h
@@ -35,11 +35,11 @@
#define SC_GS(sc) SC_OFFSET(sc, SC_GS)
#define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS)
#define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK)
+#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
#if 0
#define SC_ORIG_RAX(sc) SC_OFFSET(sc, SC_ORIG_RAX)
#define SC_DS(sc) SC_OFFSET(sc, SC_DS)
#define SC_ES(sc) SC_OFFSET(sc, SC_ES)
-#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
#endif
#endif
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index a2d9306..6fa63a2 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -7,7 +7,7 @@
clean-files :=
obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \
- physmem.o process_kern.o ptrace.o reboot.o resource.o sigio.o \
+ physmem.o process.o ptrace.o reboot.o resource.o sigio.o \
signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o uaccess.o \
um_arch.o umid.o
diff --git a/arch/um/kernel/gmon_syms.c b/arch/um/kernel/gmon_syms.c
index 2c86e7f..13aa115 100644
--- a/arch/um/kernel/gmon_syms.c
+++ b/arch/um/kernel/gmon_syms.c
@@ -5,7 +5,7 @@
#include "linux/module.h"
-extern void __bb_init_func(void *);
+extern void __bb_init_func(void *) __attribute__((weak));
EXPORT_SYMBOL(__bb_init_func);
/* This is defined (and referred to in profiling stub code) only by some GCC
@@ -21,14 +21,3 @@
extern void __gcov_merge_add(void *) __attribute__((weak));
EXPORT_SYMBOL(__gcov_merge_add);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index c97045d..f030e44 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -21,7 +21,6 @@
#include "mem_user.h"
#include "os.h"
-EXPORT_SYMBOL(stop);
EXPORT_SYMBOL(uml_physmem);
EXPORT_SYMBOL(set_signals);
EXPORT_SYMBOL(get_signals);
@@ -41,12 +40,14 @@
EXPORT_SYMBOL(find_iomem);
#ifdef CONFIG_MODE_TT
+EXPORT_SYMBOL(stop);
EXPORT_SYMBOL(strncpy_from_user_tt);
EXPORT_SYMBOL(copy_from_user_tt);
EXPORT_SYMBOL(copy_to_user_tt);
#endif
#ifdef CONFIG_MODE_SKAS
+EXPORT_SYMBOL(strnlen_user_skas);
EXPORT_SYMBOL(strncpy_from_user_skas);
EXPORT_SYMBOL(copy_to_user_skas);
EXPORT_SYMBOL(copy_from_user_skas);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 93121c6..c95855b 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -226,7 +226,8 @@
for(i = 0; i < ARRAY_SIZE(zones_size); i++)
zones_size[i] = 0;
- zones_size[ZONE_DMA] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT);
+ zones_size[ZONE_NORMAL] = (end_iomem >> PAGE_SHIFT) -
+ (uml_physmem >> PAGE_SHIFT);
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = highmem >> PAGE_SHIFT;
#endif
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process.c
similarity index 96%
rename from arch/um/kernel/process_kern.c
rename to arch/um/kernel/process.c
index 537895d..fe6c64a 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process.c
@@ -1,10 +1,9 @@
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Copyright 2003 PathScale, Inc.
* Licensed under the GPL
*/
-#include "linux/config.h"
#include "linux/kernel.h"
#include "linux/sched.h"
#include "linux/interrupt.h"
@@ -113,11 +112,11 @@
void *_switch_to(void *prev, void *next, void *last)
{
- struct task_struct *from = prev;
- struct task_struct *to= next;
+ struct task_struct *from = prev;
+ struct task_struct *to= next;
- to->thread.prev_sched = from;
- set_current(to);
+ to->thread.prev_sched = from;
+ set_current(to);
do {
current->thread.saved_task = NULL ;
@@ -128,7 +127,7 @@
prev= current;
} while(current->thread.saved_task);
- return(current->thread.prev_sched);
+ return(current->thread.prev_sched);
}
@@ -142,19 +141,19 @@
{
CHOOSE_MODE(release_thread_tt(task), release_thread_skas(task));
}
-
+
void exit_thread(void)
{
unprotect_stack((unsigned long) current_thread);
}
-
+
void *get_current(void)
{
return(current);
}
int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
- unsigned long stack_top, struct task_struct * p,
+ unsigned long stack_top, struct task_struct * p,
struct pt_regs *regs)
{
int ret;
@@ -183,11 +182,11 @@
int save_kmalloc_ok = kmalloc_ok;
kmalloc_ok = 0;
- CHOOSE_MODE_PROC(initial_thread_cb_tt, initial_thread_cb_skas, proc,
+ CHOOSE_MODE_PROC(initial_thread_cb_tt, initial_thread_cb_skas, proc,
arg);
kmalloc_ok = save_kmalloc_ok;
}
-
+
unsigned long stack_sp(unsigned long page)
{
return(page + PAGE_SIZE - sizeof(void *));
@@ -211,7 +210,7 @@
*/
if(need_resched())
schedule();
-
+
idle_sleep(10);
}
}
@@ -226,7 +225,7 @@
return(PAGE_SIZE);
}
-void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
+void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
pte_t *pte_out)
{
pgd_t *pgd;
@@ -235,7 +234,7 @@
pte_t *pte;
pte_t ptent;
- if(task->mm == NULL)
+ if(task->mm == NULL)
return(ERR_PTR(-EINVAL));
pgd = pgd_offset(task->mm, addr);
if(!pgd_present(*pgd))
@@ -246,7 +245,7 @@
return(ERR_PTR(-EINVAL));
pmd = pmd_offset(pud, addr);
- if(!pmd_present(*pmd))
+ if(!pmd_present(*pmd))
return(ERR_PTR(-EINVAL));
pte = pte_offset_kernel(pmd, addr);
@@ -271,7 +270,7 @@
void force_sigbus(void)
{
- printk(KERN_ERR "Killing pid %d because of a lack of memory\n",
+ printk(KERN_ERR "Killing pid %d because of a lack of memory\n",
current->pid);
lock_kernel();
sigaddset(¤t->pending.signal, SIGBUS);
diff --git a/arch/um/kernel/skas/Makefile b/arch/um/kernel/skas/Makefile
index ea3a8e4..3e3fa7e 100644
--- a/arch/um/kernel/skas/Makefile
+++ b/arch/um/kernel/skas/Makefile
@@ -3,8 +3,7 @@
# Licensed under the GPL
#
-obj-y := clone.o exec_kern.o mem.o mmu.o process_kern.o \
- syscall.o tlb.o uaccess.o
+obj-y := clone.o exec.o mem.o mmu.o process.o syscall.o tlb.o uaccess.o
# clone.o is in the stub, so it can't be built with profiling
# GCC hardened also auto-enables -fpic, but we need %ebx so it can't work ->
diff --git a/arch/um/kernel/skas/exec.c b/arch/um/kernel/skas/exec.c
new file mode 100644
index 0000000..54b7959
--- /dev/null
+++ b/arch/um/kernel/skas/exec.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/kernel.h"
+#include "asm/current.h"
+#include "asm/page.h"
+#include "asm/signal.h"
+#include "asm/ptrace.h"
+#include "asm/uaccess.h"
+#include "asm/mmu_context.h"
+#include "tlb.h"
+#include "skas.h"
+#include "um_mmu.h"
+#include "os.h"
+
+void flush_thread_skas(void)
+{
+ force_flush_all();
+ switch_mm_skas(¤t->mm->context.skas.id);
+}
+
+void start_thread_skas(struct pt_regs *regs, unsigned long eip,
+ unsigned long esp)
+{
+ set_fs(USER_DS);
+ PT_REGS_IP(regs) = eip;
+ PT_REGS_SP(regs) = esp;
+}
diff --git a/arch/um/kernel/skas/exec_kern.c b/arch/um/kernel/skas/exec_kern.c
deleted file mode 100644
index 77ed7bb..0000000
--- a/arch/um/kernel/skas/exec_kern.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include "linux/kernel.h"
-#include "asm/current.h"
-#include "asm/page.h"
-#include "asm/signal.h"
-#include "asm/ptrace.h"
-#include "asm/uaccess.h"
-#include "asm/mmu_context.h"
-#include "tlb.h"
-#include "skas.h"
-#include "um_mmu.h"
-#include "os.h"
-
-void flush_thread_skas(void)
-{
- force_flush_all();
- switch_mm_skas(¤t->mm->context.skas.id);
-}
-
-void start_thread_skas(struct pt_regs *regs, unsigned long eip,
- unsigned long esp)
-{
- set_fs(USER_DS);
- PT_REGS_IP(regs) = eip;
- PT_REGS_SP(regs) = esp;
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/skas/process.c b/arch/um/kernel/skas/process.c
new file mode 100644
index 0000000..ae4fa71
--- /dev/null
+++ b/arch/um/kernel/skas/process.c
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/sched.h"
+#include "linux/slab.h"
+#include "linux/ptrace.h"
+#include "linux/proc_fs.h"
+#include "linux/file.h"
+#include "linux/errno.h"
+#include "linux/init.h"
+#include "asm/uaccess.h"
+#include "asm/atomic.h"
+#include "kern_util.h"
+#include "skas.h"
+#include "os.h"
+#include "user_util.h"
+#include "tlb.h"
+#include "kern.h"
+#include "mode.h"
+#include "registers.h"
+
+void switch_to_skas(void *prev, void *next)
+{
+ struct task_struct *from, *to;
+
+ from = prev;
+ to = next;
+
+ /* XXX need to check runqueues[cpu].idle */
+ if(current->pid == 0)
+ switch_timers(0);
+
+ switch_threads(&from->thread.mode.skas.switch_buf,
+ &to->thread.mode.skas.switch_buf);
+
+ arch_switch_to_skas(current->thread.prev_sched, current);
+
+ if(current->pid == 0)
+ switch_timers(1);
+}
+
+extern void schedule_tail(struct task_struct *prev);
+
+/* This is called magically, by its address being stuffed in a jmp_buf
+ * and being longjmp-d to.
+ */
+void new_thread_handler(void)
+{
+ int (*fn)(void *), n;
+ void *arg;
+
+ if(current->thread.prev_sched != NULL)
+ schedule_tail(current->thread.prev_sched);
+ current->thread.prev_sched = NULL;
+
+ fn = current->thread.request.u.thread.proc;
+ arg = current->thread.request.u.thread.arg;
+
+ /* The return value is 1 if the kernel thread execs a process,
+ * 0 if it just exits
+ */
+ n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf);
+ if(n == 1){
+ /* Handle any immediate reschedules or signals */
+ interrupt_end();
+ userspace(¤t->thread.regs.regs);
+ }
+ else do_exit(0);
+}
+
+void release_thread_skas(struct task_struct *task)
+{
+}
+
+/* Called magically, see new_thread_handler above */
+void fork_handler(void)
+{
+ force_flush_all();
+ if(current->thread.prev_sched == NULL)
+ panic("blech");
+
+ schedule_tail(current->thread.prev_sched);
+
+ /* XXX: if interrupt_end() calls schedule, this call to
+ * arch_switch_to_skas isn't needed. We could want to apply this to
+ * improve performance. -bb */
+ arch_switch_to_skas(current->thread.prev_sched, current);
+
+ current->thread.prev_sched = NULL;
+
+/* Handle any immediate reschedules or signals */
+ interrupt_end();
+
+ userspace(¤t->thread.regs.regs);
+}
+
+int copy_thread_skas(int nr, unsigned long clone_flags, unsigned long sp,
+ unsigned long stack_top, struct task_struct * p,
+ struct pt_regs *regs)
+{
+ void (*handler)(void);
+
+ if(current->thread.forking){
+ memcpy(&p->thread.regs.regs.skas, ®s->regs.skas,
+ sizeof(p->thread.regs.regs.skas));
+ REGS_SET_SYSCALL_RETURN(p->thread.regs.regs.skas.regs, 0);
+ if(sp != 0) REGS_SP(p->thread.regs.regs.skas.regs) = sp;
+
+ handler = fork_handler;
+
+ arch_copy_thread(¤t->thread.arch, &p->thread.arch);
+ }
+ else {
+ init_thread_registers(&p->thread.regs.regs);
+ p->thread.request.u.thread = current->thread.request.u.thread;
+ handler = new_thread_handler;
+ }
+
+ new_thread(task_stack_page(p), &p->thread.mode.skas.switch_buf,
+ handler);
+ return(0);
+}
+
+int new_mm(unsigned long stack)
+{
+ int fd;
+
+ fd = os_open_file("/proc/mm", of_cloexec(of_write(OPENFLAGS())), 0);
+ if(fd < 0)
+ return(fd);
+
+ if(skas_needs_stub)
+ map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack);
+
+ return(fd);
+}
+
+void init_idle_skas(void)
+{
+ cpu_tasks[current_thread->cpu].pid = os_getpid();
+ default_idle();
+}
+
+extern void start_kernel(void);
+
+static int start_kernel_proc(void *unused)
+{
+ int pid;
+
+ block_signals();
+ pid = os_getpid();
+
+ cpu_tasks[0].pid = pid;
+ cpu_tasks[0].task = current;
+#ifdef CONFIG_SMP
+ cpu_online_map = cpumask_of_cpu(0);
+#endif
+ start_kernel();
+ return(0);
+}
+
+extern int userspace_pid[];
+
+int start_uml_skas(void)
+{
+ if(proc_mm)
+ userspace_pid[0] = start_userspace(0);
+
+ init_new_thread_signals();
+
+ init_task.thread.request.u.thread.proc = start_kernel_proc;
+ init_task.thread.request.u.thread.arg = NULL;
+ return(start_idle_thread(task_stack_page(&init_task),
+ &init_task.thread.mode.skas.switch_buf));
+}
+
+int external_pid_skas(struct task_struct *task)
+{
+#warning Need to look up userspace_pid by cpu
+ return(userspace_pid[0]);
+}
+
+int thread_pid_skas(struct task_struct *task)
+{
+#warning Need to look up userspace_pid by cpu
+ return(userspace_pid[0]);
+}
+
+void kill_off_processes_skas(void)
+{
+ if(proc_mm)
+#warning need to loop over userspace_pids in kill_off_processes_skas
+ os_kill_ptraced_process(userspace_pid[0], 1);
+ else {
+ struct task_struct *p;
+ int pid, me;
+
+ me = os_getpid();
+ for_each_process(p){
+ if(p->mm == NULL)
+ continue;
+
+ pid = p->mm->context.skas.id.u.pid;
+ os_kill_ptraced_process(pid, 1);
+ }
+ }
+}
+
+unsigned long current_stub_stack(void)
+{
+ if(current->mm == NULL)
+ return(0);
+
+ return(current->mm->context.skas.id.stack);
+}
diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c
index 55caeec..0f3d5d0 100644
--- a/arch/um/kernel/skas/process_kern.c
+++ b/arch/um/kernel/skas/process_kern.c
@@ -1,227 +1,484 @@
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright 2003 PathScale, Inc.
* Licensed under the GPL
*/
+#include "linux/config.h"
+#include "linux/kernel.h"
#include "linux/sched.h"
+#include "linux/interrupt.h"
+#include "linux/string.h"
+#include "linux/mm.h"
#include "linux/slab.h"
-#include "linux/ptrace.h"
-#include "linux/proc_fs.h"
-#include "linux/file.h"
-#include "linux/errno.h"
+#include "linux/utsname.h"
+#include "linux/fs.h"
+#include "linux/utime.h"
+#include "linux/smp_lock.h"
+#include "linux/module.h"
#include "linux/init.h"
+#include "linux/capability.h"
+#include "linux/vmalloc.h"
+#include "linux/spinlock.h"
+#include "linux/proc_fs.h"
+#include "linux/ptrace.h"
+#include "linux/random.h"
+#include "linux/personality.h"
+#include "asm/unistd.h"
+#include "asm/mman.h"
+#include "asm/segment.h"
+#include "asm/stat.h"
+#include "asm/pgtable.h"
+#include "asm/processor.h"
+#include "asm/tlbflush.h"
#include "asm/uaccess.h"
-#include "asm/atomic.h"
-#include "kern_util.h"
-#include "skas.h"
-#include "os.h"
+#include "asm/user.h"
#include "user_util.h"
-#include "tlb.h"
+#include "kern_util.h"
#include "kern.h"
+#include "signal_kern.h"
+#include "init.h"
+#include "irq_user.h"
+#include "mem_user.h"
+#include "tlb.h"
+#include "frame_kern.h"
+#include "sigcontext.h"
+#include "os.h"
#include "mode.h"
-#include "registers.h"
+#include "mode_kern.h"
+#include "choose-mode.h"
-void switch_to_skas(void *prev, void *next)
+/* This is a per-cpu array. A processor only modifies its entry and it only
+ * cares about its entry, so it's OK if another processor is modifying its
+ * entry.
+ */
+struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } };
+
+int external_pid(void *t)
{
- struct task_struct *from, *to;
+ struct task_struct *task = t ? t : current;
- from = prev;
- to = next;
-
- /* XXX need to check runqueues[cpu].idle */
- if(current->pid == 0)
- switch_timers(0);
-
- switch_threads(&from->thread.mode.skas.switch_buf,
- to->thread.mode.skas.switch_buf);
-
- arch_switch_to_skas(current->thread.prev_sched, current);
-
- if(current->pid == 0)
- switch_timers(1);
+ return(CHOOSE_MODE_PROC(external_pid_tt, external_pid_skas, task));
}
-extern void schedule_tail(struct task_struct *prev);
-
-void new_thread_handler(int sig)
+int pid_to_processor_id(int pid)
{
- int (*fn)(void *), n;
- void *arg;
+ int i;
- fn = current->thread.request.u.thread.proc;
- arg = current->thread.request.u.thread.arg;
- os_usr1_signal(1);
- thread_wait(¤t->thread.mode.skas.switch_buf,
- current->thread.mode.skas.fork_buf);
-
- if(current->thread.prev_sched != NULL)
- schedule_tail(current->thread.prev_sched);
- current->thread.prev_sched = NULL;
-
- /* The return value is 1 if the kernel thread execs a process,
- * 0 if it just exits
- */
- n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf);
- if(n == 1){
- /* Handle any immediate reschedules or signals */
- interrupt_end();
- userspace(¤t->thread.regs.regs);
+ for(i = 0; i < ncpus; i++){
+ if(cpu_tasks[i].pid == pid) return(i);
}
- else do_exit(0);
+ return(-1);
}
-void new_thread_proc(void *stack, void (*handler)(int sig))
+void free_stack(unsigned long stack, int order)
{
- init_new_thread_stack(stack, handler);
- os_usr1_process(os_getpid());
+ free_pages(stack, order);
}
-void release_thread_skas(struct task_struct *task)
+unsigned long alloc_stack(int order, int atomic)
{
+ unsigned long page;
+ gfp_t flags = GFP_KERNEL;
+
+ if (atomic)
+ flags = GFP_ATOMIC;
+ page = __get_free_pages(flags, order);
+ if(page == 0)
+ return(0);
+ stack_protections(page);
+ return(page);
}
-void fork_handler(int sig)
-{
- os_usr1_signal(1);
- thread_wait(¤t->thread.mode.skas.switch_buf,
- current->thread.mode.skas.fork_buf);
-
- force_flush_all();
- if(current->thread.prev_sched == NULL)
- panic("blech");
-
- schedule_tail(current->thread.prev_sched);
-
- /* XXX: if interrupt_end() calls schedule, this call to
- * arch_switch_to_skas isn't needed. We could want to apply this to
- * improve performance. -bb */
- arch_switch_to_skas(current->thread.prev_sched, current);
-
- current->thread.prev_sched = NULL;
-
-/* Handle any immediate reschedules or signals */
- interrupt_end();
-
- userspace(¤t->thread.regs.regs);
-}
-
-int copy_thread_skas(int nr, unsigned long clone_flags, unsigned long sp,
- unsigned long stack_top, struct task_struct * p,
- struct pt_regs *regs)
-{
- void (*handler)(int);
-
- if(current->thread.forking){
- memcpy(&p->thread.regs.regs.skas, ®s->regs.skas,
- sizeof(p->thread.regs.regs.skas));
- REGS_SET_SYSCALL_RETURN(p->thread.regs.regs.skas.regs, 0);
- if(sp != 0) REGS_SP(p->thread.regs.regs.skas.regs) = sp;
-
- handler = fork_handler;
-
- arch_copy_thread(¤t->thread.arch, &p->thread.arch);
- }
- else {
- init_thread_registers(&p->thread.regs.regs);
- p->thread.request.u.thread = current->thread.request.u.thread;
- handler = new_thread_handler;
- }
-
- new_thread(task_stack_page(p), &p->thread.mode.skas.switch_buf,
- &p->thread.mode.skas.fork_buf, handler);
- return(0);
-}
-
-int new_mm(unsigned long stack)
-{
- int fd;
-
- fd = os_open_file("/proc/mm", of_cloexec(of_write(OPENFLAGS())), 0);
- if(fd < 0)
- return(fd);
-
- if(skas_needs_stub)
- map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack);
-
- return(fd);
-}
-
-void init_idle_skas(void)
-{
- cpu_tasks[current_thread->cpu].pid = os_getpid();
- default_idle();
-}
-
-extern void start_kernel(void);
-
-static int start_kernel_proc(void *unused)
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
int pid;
- block_signals();
- pid = os_getpid();
-
- cpu_tasks[0].pid = pid;
- cpu_tasks[0].task = current;
-#ifdef CONFIG_SMP
- cpu_online_map = cpumask_of_cpu(0);
-#endif
- start_kernel();
- return(0);
+ current->thread.request.u.thread.proc = fn;
+ current->thread.request.u.thread.arg = arg;
+ pid = do_fork(CLONE_VM | CLONE_UNTRACED | flags, 0,
+ ¤t->thread.regs, 0, NULL, NULL);
+ if(pid < 0)
+ panic("do_fork failed in kernel_thread, errno = %d", pid);
+ return(pid);
}
-extern int userspace_pid[];
-
-int start_uml_skas(void)
+void set_current(void *t)
{
- if(proc_mm)
- userspace_pid[0] = start_userspace(0);
+ struct task_struct *task = t;
- init_new_thread_signals();
-
- init_task.thread.request.u.thread.proc = start_kernel_proc;
- init_task.thread.request.u.thread.arg = NULL;
- return(start_idle_thread(task_stack_page(&init_task),
- &init_task.thread.mode.skas.switch_buf,
- &init_task.thread.mode.skas.fork_buf));
+ cpu_tasks[task_thread_info(task)->cpu] = ((struct cpu_task)
+ { external_pid(task), task });
}
-int external_pid_skas(struct task_struct *task)
+void *_switch_to(void *prev, void *next, void *last)
{
-#warning Need to look up userspace_pid by cpu
- return(userspace_pid[0]);
+ struct task_struct *from = prev;
+ struct task_struct *to= next;
+
+ to->thread.prev_sched = from;
+ set_current(to);
+
+ do {
+ current->thread.saved_task = NULL ;
+ CHOOSE_MODE_PROC(switch_to_tt, switch_to_skas, prev, next);
+ if(current->thread.saved_task)
+ show_regs(&(current->thread.regs));
+ next= current->thread.saved_task;
+ prev= current;
+ } while(current->thread.saved_task);
+
+ return(current->thread.prev_sched);
+
}
-int thread_pid_skas(struct task_struct *task)
+void interrupt_end(void)
{
-#warning Need to look up userspace_pid by cpu
- return(userspace_pid[0]);
+ if(need_resched()) schedule();
+ if(test_tsk_thread_flag(current, TIF_SIGPENDING)) do_signal();
}
-void kill_off_processes_skas(void)
+void release_thread(struct task_struct *task)
{
- if(proc_mm)
-#warning need to loop over userspace_pids in kill_off_processes_skas
- os_kill_ptraced_process(userspace_pid[0], 1);
- else {
- struct task_struct *p;
- int pid, me;
+ CHOOSE_MODE(release_thread_tt(task), release_thread_skas(task));
+}
- me = os_getpid();
- for_each_process(p){
- if(p->mm == NULL)
- continue;
+void exit_thread(void)
+{
+ unprotect_stack((unsigned long) current_thread);
+}
- pid = p->mm->context.skas.id.u.pid;
- os_kill_ptraced_process(pid, 1);
- }
+void *get_current(void)
+{
+ return(current);
+}
+
+int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
+ unsigned long stack_top, struct task_struct * p,
+ struct pt_regs *regs)
+{
+ int ret;
+
+ p->thread = (struct thread_struct) INIT_THREAD;
+ ret = CHOOSE_MODE_PROC(copy_thread_tt, copy_thread_skas, nr,
+ clone_flags, sp, stack_top, p, regs);
+
+ if (ret || !current->thread.forking)
+ goto out;
+
+ clear_flushed_tls(p);
+
+ /*
+ * Set a new TLS for the child thread?
+ */
+ if (clone_flags & CLONE_SETTLS)
+ ret = arch_copy_tls(p);
+
+out:
+ return ret;
+}
+
+void initial_thread_cb(void (*proc)(void *), void *arg)
+{
+ int save_kmalloc_ok = kmalloc_ok;
+
+ kmalloc_ok = 0;
+ CHOOSE_MODE_PROC(initial_thread_cb_tt, initial_thread_cb_skas, proc,
+ arg);
+ kmalloc_ok = save_kmalloc_ok;
+}
+
+unsigned long stack_sp(unsigned long page)
+{
+ return(page + PAGE_SIZE - sizeof(void *));
+}
+
+int current_pid(void)
+{
+ return(current->pid);
+}
+
+void default_idle(void)
+{
+ CHOOSE_MODE(uml_idle_timer(), (void) 0);
+
+ while(1){
+ /* endless idle loop with no priority at all */
+
+ /*
+ * although we are an idle CPU, we do not want to
+ * get into the scheduler unnecessarily.
+ */
+ if(need_resched())
+ schedule();
+
+ idle_sleep(10);
}
}
-unsigned long current_stub_stack(void)
+void cpu_idle(void)
{
- if(current->mm == NULL)
+ CHOOSE_MODE(init_idle_tt(), init_idle_skas());
+}
+
+int page_size(void)
+{
+ return(PAGE_SIZE);
+}
+
+void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
+ pte_t *pte_out)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ pte_t ptent;
+
+ if(task->mm == NULL)
+ return(ERR_PTR(-EINVAL));
+ pgd = pgd_offset(task->mm, addr);
+ if(!pgd_present(*pgd))
+ return(ERR_PTR(-EINVAL));
+
+ pud = pud_offset(pgd, addr);
+ if(!pud_present(*pud))
+ return(ERR_PTR(-EINVAL));
+
+ pmd = pmd_offset(pud, addr);
+ if(!pmd_present(*pmd))
+ return(ERR_PTR(-EINVAL));
+
+ pte = pte_offset_kernel(pmd, addr);
+ ptent = *pte;
+ if(!pte_present(ptent))
+ return(ERR_PTR(-EINVAL));
+
+ if(pte_out != NULL)
+ *pte_out = ptent;
+ return((void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK));
+}
+
+char *current_cmd(void)
+{
+#if defined(CONFIG_SMP) || defined(CONFIG_HIGHMEM)
+ return("(Unknown)");
+#else
+ void *addr = um_virt_to_phys(current, current->mm->arg_start, NULL);
+ return IS_ERR(addr) ? "(Unknown)": __va((unsigned long) addr);
+#endif
+}
+
+void force_sigbus(void)
+{
+ printk(KERN_ERR "Killing pid %d because of a lack of memory\n",
+ current->pid);
+ lock_kernel();
+ sigaddset(¤t->pending.signal, SIGBUS);
+ recalc_sigpending();
+ current->flags |= PF_SIGNALED;
+ do_exit(SIGBUS | 0x80);
+}
+
+void dump_thread(struct pt_regs *regs, struct user *u)
+{
+}
+
+void enable_hlt(void)
+{
+ panic("enable_hlt");
+}
+
+EXPORT_SYMBOL(enable_hlt);
+
+void disable_hlt(void)
+{
+ panic("disable_hlt");
+}
+
+EXPORT_SYMBOL(disable_hlt);
+
+void *um_kmalloc(int size)
+{
+ return kmalloc(size, GFP_KERNEL);
+}
+
+void *um_kmalloc_atomic(int size)
+{
+ return kmalloc(size, GFP_ATOMIC);
+}
+
+void *um_vmalloc(int size)
+{
+ return vmalloc(size);
+}
+
+void *um_vmalloc_atomic(int size)
+{
+ return __vmalloc(size, GFP_ATOMIC | __GFP_HIGHMEM, PAGE_KERNEL);
+}
+
+int __cant_sleep(void) {
+ return in_atomic() || irqs_disabled() || in_interrupt();
+ /* Is in_interrupt() really needed? */
+}
+
+unsigned long get_fault_addr(void)
+{
+ return((unsigned long) current->thread.fault_addr);
+}
+
+EXPORT_SYMBOL(get_fault_addr);
+
+void not_implemented(void)
+{
+ printk(KERN_DEBUG "Something isn't implemented in here\n");
+}
+
+EXPORT_SYMBOL(not_implemented);
+
+int user_context(unsigned long sp)
+{
+ unsigned long stack;
+
+ stack = sp & (PAGE_MASK << CONFIG_KERNEL_STACK_ORDER);
+ return(stack != (unsigned long) current_thread);
+}
+
+extern exitcall_t __uml_exitcall_begin, __uml_exitcall_end;
+
+void do_uml_exitcalls(void)
+{
+ exitcall_t *call;
+
+ call = &__uml_exitcall_end;
+ while (--call >= &__uml_exitcall_begin)
+ (*call)();
+}
+
+char *uml_strdup(char *string)
+{
+ return kstrdup(string, GFP_KERNEL);
+}
+
+int copy_to_user_proc(void __user *to, void *from, int size)
+{
+ return(copy_to_user(to, from, size));
+}
+
+int copy_from_user_proc(void *to, void __user *from, int size)
+{
+ return(copy_from_user(to, from, size));
+}
+
+int clear_user_proc(void __user *buf, int size)
+{
+ return(clear_user(buf, size));
+}
+
+int strlen_user_proc(char __user *str)
+{
+ return(strlen_user(str));
+}
+
+int smp_sigio_handler(void)
+{
+#ifdef CONFIG_SMP
+ int cpu = current_thread->cpu;
+ IPI_handler(cpu);
+ if(cpu != 0)
+ return(1);
+#endif
+ return(0);
+}
+
+int cpu(void)
+{
+ return(current_thread->cpu);
+}
+
+static atomic_t using_sysemu = ATOMIC_INIT(0);
+int sysemu_supported;
+
+void set_using_sysemu(int value)
+{
+ if (value > sysemu_supported)
+ return;
+ atomic_set(&using_sysemu, value);
+}
+
+int get_using_sysemu(void)
+{
+ return atomic_read(&using_sysemu);
+}
+
+static int proc_read_sysemu(char *buf, char **start, off_t offset, int size,int *eof, void *data)
+{
+ if (snprintf(buf, size, "%d\n", get_using_sysemu()) < size) /*No overflow*/
+ *eof = 1;
+
+ return strlen(buf);
+}
+
+static int proc_write_sysemu(struct file *file,const char __user *buf, unsigned long count,void *data)
+{
+ char tmp[2];
+
+ if (copy_from_user(tmp, buf, 1))
+ return -EFAULT;
+
+ if (tmp[0] >= '0' && tmp[0] <= '2')
+ set_using_sysemu(tmp[0] - '0');
+ return count; /*We use the first char, but pretend to write everything*/
+}
+
+int __init make_proc_sysemu(void)
+{
+ struct proc_dir_entry *ent;
+ if (!sysemu_supported)
+ return 0;
+
+ ent = create_proc_entry("sysemu", 0600, &proc_root);
+
+ if (ent == NULL)
+ {
+ printk(KERN_WARNING "Failed to register /proc/sysemu\n");
+ return(0);
+ }
+
+ ent->read_proc = proc_read_sysemu;
+ ent->write_proc = proc_write_sysemu;
+
+ return 0;
+}
+
+late_initcall(make_proc_sysemu);
+
+int singlestepping(void * t)
+{
+ struct task_struct *task = t ? t : current;
+
+ if ( ! (task->ptrace & PT_DTRACE) )
return(0);
- return(current->mm->context.skas.id.stack);
+ if (task->thread.singlestep_syscall)
+ return(1);
+
+ return 2;
}
+
+/*
+ * Only x86 and x86_64 have an arch_align_stack().
+ * All other arches have "#define arch_align_stack(x) (x)"
+ * in their asm/system.h
+ * As this is included in UML from asm-um/system-generic.h,
+ * we can use it to behave as the subarch does.
+ */
+#ifndef arch_align_stack
+unsigned long arch_align_stack(unsigned long sp)
+{
+ if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+ sp -= get_random_int() % 8192;
+ return sp & ~0xf;
+}
+#endif
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 2454bbd..820affb 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -95,7 +95,7 @@
do_timer(regs);
- nsecs = get_time() + local_offset;
+ nsecs = get_time();
xtime.tv_sec = nsecs / NSEC_PER_SEC;
xtime.tv_nsec = nsecs - xtime.tv_sec * NSEC_PER_SEC;
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index e5eeaf2..61a23ff 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -140,14 +140,6 @@
segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
}
-struct kern_handlers handlinfo_kern = {
- .relay_signal = relay_signal,
- .winch = winch,
- .bus_handler = relay_signal,
- .page_fault = segv_handler,
- .sigio_handler = sigio_handler,
- .timer_handler = timer_handler
-};
/*
* We give a *copy* of the faultinfo in the regs to segv.
* This must be done, since nesting SEGVs could overwrite
@@ -253,6 +245,15 @@
do_IRQ(WINCH_IRQ, regs);
}
+const struct kern_handlers handlinfo_kern = {
+ .relay_signal = relay_signal,
+ .winch = winch,
+ .bus_handler = bus_handler,
+ .page_fault = segv_handler,
+ .sigio_handler = sigio_handler,
+ .timer_handler = timer_handler
+};
+
void trap_init(void)
{
}
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 7896cf9..5500571 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -106,7 +106,7 @@
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index f4bfc4c..b418392 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -4,15 +4,19 @@
#
obj-y = aio.o elf_aux.o file.o helper.o irq.o main.o mem.o process.o sigio.o \
- signal.o start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o tls.o \
+ signal.o start_up.o time.o trap.o tty.o uaccess.o umid.o tls.o \
user_syms.o util.o drivers/ sys-$(SUBARCH)/
obj-$(CONFIG_MODE_SKAS) += skas/
+
+obj-$(CONFIG_MODE_TT) += tt.o
+user-objs-$(CONFIG_MODE_TT) += tt.o
+
obj-$(CONFIG_TTY_LOG) += tty_log.o
user-objs-$(CONFIG_TTY_LOG) += tty_log.o
USER_OBJS := $(user-objs-y) aio.o elf_aux.o file.o helper.o irq.o main.o mem.o \
- process.o sigio.o signal.o start_up.o time.o trap.o tt.o tty.o tls.o \
+ process.o sigio.o signal.o start_up.o time.o trap.o tty.o tls.o \
uaccess.o umid.o util.o
CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH)
diff --git a/arch/um/os-Linux/drivers/etap.h b/arch/um/os-Linux/drivers/etap.h
index b84f6c4..57ecdaf 100644
--- a/arch/um/os-Linux/drivers/etap.h
+++ b/arch/um/os-Linux/drivers/etap.h
@@ -13,7 +13,7 @@
void *dev;
};
-extern struct net_user_info ethertap_user_info;
+extern const struct net_user_info ethertap_user_info;
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
diff --git a/arch/um/os-Linux/drivers/ethertap_kern.c b/arch/um/os-Linux/drivers/ethertap_kern.c
index 768606b..16385e2 100644
--- a/arch/um/os-Linux/drivers/ethertap_kern.c
+++ b/arch/um/os-Linux/drivers/ethertap_kern.c
@@ -65,7 +65,7 @@
return(net_send(fd, (*skb)->data, (*skb)->len));
}
-struct net_kern_info ethertap_kern_info = {
+const struct net_kern_info ethertap_kern_info = {
.init = etap_init,
.protocol = eth_protocol,
.read = etap_read,
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index 8f49507..f559bdf7 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -216,7 +216,7 @@
etap_close_addr(addr, netmask, &pri->control_fd);
}
-struct net_user_info ethertap_user_info = {
+const struct net_user_info ethertap_user_info = {
.init = etap_user_init,
.open = etap_open,
.close = etap_close,
diff --git a/arch/um/os-Linux/drivers/tuntap.h b/arch/um/os-Linux/drivers/tuntap.h
index 25d4a28..d3e8d3a 100644
--- a/arch/um/os-Linux/drivers/tuntap.h
+++ b/arch/um/os-Linux/drivers/tuntap.h
@@ -16,7 +16,7 @@
void *dev;
};
-extern struct net_user_info tuntap_user_info;
+extern const struct net_user_info tuntap_user_info;
#endif
diff --git a/arch/um/os-Linux/drivers/tuntap_kern.c b/arch/um/os-Linux/drivers/tuntap_kern.c
index 190009a..0edbac6 100644
--- a/arch/um/os-Linux/drivers/tuntap_kern.c
+++ b/arch/um/os-Linux/drivers/tuntap_kern.c
@@ -53,7 +53,7 @@
return(net_write(fd, (*skb)->data, (*skb)->len));
}
-struct net_kern_info tuntap_kern_info = {
+const struct net_kern_info tuntap_kern_info = {
.init = tuntap_init,
.protocol = eth_protocol,
.read = tuntap_read,
diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c
index 87c3aa0..e846b23 100644
--- a/arch/um/os-Linux/drivers/tuntap_user.c
+++ b/arch/um/os-Linux/drivers/tuntap_user.c
@@ -205,7 +205,7 @@
return(mtu);
}
-struct net_user_info tuntap_user_info = {
+const struct net_user_info tuntap_user_info = {
.init = tuntap_user_init,
.open = tuntap_open,
.close = tuntap_close,
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 42e3d1ed..cb9ab54 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -444,56 +444,22 @@
}
}
-void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
- void (*handler)(int))
+void new_thread(void *stack, jmp_buf *buf, void (*handler)(void))
{
- unsigned long flags;
- jmp_buf switch_buf, fork_buf;
-
- *switch_buf_ptr = &switch_buf;
- *fork_buf_ptr = &fork_buf;
-
- /* Somewhat subtle - siglongjmp restores the signal mask before doing
- * the longjmp. This means that when jumping from one stack to another
- * when the target stack has interrupts enabled, an interrupt may occur
- * on the source stack. This is bad when starting up a process because
- * it's not supposed to get timer ticks until it has been scheduled.
- * So, we disable interrupts around the sigsetjmp to ensure that
- * they can't happen until we get back here where they are safe.
- */
- flags = get_signals();
- block_signals();
- if(UML_SETJMP(&fork_buf) == 0)
- new_thread_proc(stack, handler);
-
- remove_sigstack();
-
- set_signals(flags);
+ (*buf)[0].JB_IP = (unsigned long) handler;
+ (*buf)[0].JB_SP = (unsigned long) stack +
+ (PAGE_SIZE << UML_CONFIG_KERNEL_STACK_ORDER) - sizeof(void *);
}
#define INIT_JMP_NEW_THREAD 0
-#define INIT_JMP_REMOVE_SIGSTACK 1
-#define INIT_JMP_CALLBACK 2
-#define INIT_JMP_HALT 3
-#define INIT_JMP_REBOOT 4
+#define INIT_JMP_CALLBACK 1
+#define INIT_JMP_HALT 2
+#define INIT_JMP_REBOOT 3
-void thread_wait(void *sw, void *fb)
+void switch_threads(jmp_buf *me, jmp_buf *you)
{
- jmp_buf buf, **switch_buf = sw, *fork_buf;
-
- *switch_buf = &buf;
- fork_buf = fb;
- if(UML_SETJMP(&buf) == 0)
- UML_LONGJMP(fork_buf, INIT_JMP_REMOVE_SIGSTACK);
-}
-
-void switch_threads(void *me, void *next)
-{
- jmp_buf my_buf, **me_ptr = me, *next_buf = next;
-
- *me_ptr = &my_buf;
- if(UML_SETJMP(&my_buf) == 0)
- UML_LONGJMP(next_buf, 1);
+ if(UML_SETJMP(me) == 0)
+ UML_LONGJMP(you, 1);
}
static jmp_buf initial_jmpbuf;
@@ -503,23 +469,21 @@
static void *cb_arg;
static jmp_buf *cb_back;
-int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
+int start_idle_thread(void *stack, jmp_buf *switch_buf)
{
- jmp_buf **switch_buf = switch_buf_ptr;
int n;
set_handler(SIGWINCH, (__sighandler_t) sig_handler,
SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGALRM,
SIGVTALRM, -1);
- *fork_buf_ptr = &initial_jmpbuf;
n = UML_SETJMP(&initial_jmpbuf);
switch(n){
case INIT_JMP_NEW_THREAD:
- new_thread_proc((void *) stack, new_thread_handler);
- break;
- case INIT_JMP_REMOVE_SIGSTACK:
- remove_sigstack();
+ (*switch_buf)[0].JB_IP = (unsigned long) new_thread_handler;
+ (*switch_buf)[0].JB_SP = (unsigned long) stack +
+ (PAGE_SIZE << UML_CONFIG_KERNEL_STACK_ORDER) -
+ sizeof(void *);
break;
case INIT_JMP_CALLBACK:
(*cb_proc)(cb_arg);
@@ -534,7 +498,7 @@
default:
panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
}
- UML_LONGJMP(*switch_buf, 1);
+ UML_LONGJMP(switch_buf, 1);
}
void initial_thread_cb_skas(void (*proc)(void *), void *arg)
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 59cc702..0e32adf 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_MODE_SKAS) += stub.o stub_segv.o
-subarch-obj-y = lib/bitops.o kernel/semaphore.o
+subarch-obj-y = lib/bitops.o lib/semaphore.o
subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem.o
subarch-obj-$(CONFIG_MODULES) += kernel/module.o
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 581ce9a..32ae137 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -85,6 +85,9 @@
bool
default y
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
config DMI
bool
default y
@@ -109,6 +112,7 @@
config X86_VSMP
bool "Support for ScaleMP vSMP"
+ depends on PCI
help
Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
supposed to run on these EM64T-based machines. Only choose this option
@@ -167,6 +171,7 @@
config MICROCODE
tristate "/dev/cpu/microcode - Intel CPU microcode support"
+ select FW_LOADER
---help---
If you say Y here the 'File systems' section, you will be
able to update the microcode on Intel processors. You will
@@ -182,6 +187,11 @@
If you use modprobe or kmod you may also want to add the line
'alias char-major-10-184 microcode' to your /etc/modules.conf file.
+config MICROCODE_OLD_INTERFACE
+ bool
+ depends on MICROCODE
+ default y
+
config X86_MSR
tristate "/dev/cpu/*/msr - Model-specific register support"
help
@@ -295,7 +305,7 @@
config K8_NUMA
bool "Old style AMD Opteron NUMA detection"
- depends on NUMA
+ depends on NUMA && PCI
default y
help
Enable K8 NUMA node topology detection. You should say Y here if
@@ -425,7 +435,6 @@
config CALGARY_IOMMU
bool "IBM Calgary IOMMU support"
- default y
select SWIOTLB
depends on PCI && EXPERIMENTAL
help
@@ -472,8 +481,7 @@
the DRAM Error Threshold.
config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "kexec system call"
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -492,7 +500,14 @@
bool "kernel crash dumps (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
- Generate crash dump after being started by kexec.
+ Generate crash dump after being started by kexec.
+ This should be normally only set in special crash dump kernels
+ which are loaded in the main kernel with kexec-tools into
+ a specially reserved region and then later executed after
+ a crash by kdump/kexec. The crash dump kernel must be compiled
+ to a memory address not used by the main kernel or BIOS using
+ PHYSICAL_START.
+ For more details see Documentation/kdump/kdump.txt
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
@@ -530,6 +545,30 @@
If unsure, say Y. Only embedded should say N here.
+config CC_STACKPROTECTOR
+ bool "Enable -fstack-protector buffer overflow detection (EXPRIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ This option turns on the -fstack-protector GCC feature. This
+ feature puts, at the beginning of critical functions, a canary
+ value on the stack just before the return address, and validates
+ the value just before actually returning. Stack based buffer
+ overflows (that need to overwrite this return address) now also
+ overwrite the canary, which gets detected and the attack is then
+ neutralized via a kernel panic.
+
+ This feature requires gcc version 4.2 or above, or a distribution
+ gcc with the feature backported. Older versions are automatically
+ detected and for those versions, this configuration option is ignored.
+
+config CC_STACKPROTECTOR_ALL
+ bool "Use stack-protector for all functions"
+ depends on CC_STACKPROTECTOR
+ help
+ Normally, GCC only inserts the canary value protection for
+ functions that use large-ish on-stack buffers. By enabling
+ this option, GCC will be asked to do this for ALL functions.
+
source kernel/Kconfig.hz
config REORDER
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 431bb4b..1c0f18d 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -54,6 +54,16 @@
cflags-y += $(call cc-option,-funit-at-a-time)
# prevent gcc from generating any FP code by mistake
cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
+# do binutils support CFI?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+
+# is .cfi_signal_frame supported too?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
+
+cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector )
+cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector-all )
CFLAGS += $(cflags-y)
CFLAGS_KERNEL += $(cflags-kernel-y)
diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile
index f89d96f..e70fa6e 100644
--- a/arch/x86_64/boot/compressed/Makefile
+++ b/arch/x86_64/boot/compressed/Makefile
@@ -7,7 +7,8 @@
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-EXTRA_AFLAGS := -traditional -m32
+EXTRA_AFLAGS := -traditional
+AFLAGS := $(subst -m64,-m32,$(AFLAGS))
# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
# -m32
diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S
index a50b631..c3bfd22 100644
--- a/arch/x86_64/boot/setup.S
+++ b/arch/x86_64/boot/setup.S
@@ -526,12 +526,12 @@
movw %cs, %ax # aka SETUPSEG
subw $DELTA_INITSEG, %ax # aka INITSEG
movw %ax, %ds
- movw $0, (0x1ff) # default is no pointing device
+ movb $0, (0x1ff) # default is no pointing device
int $0x11 # int 0x11: equipment list
testb $0x04, %al # check if mouse installed
jz no_psmouse
- movw $0xAA, (0x1ff) # device present
+ movb $0xAA, (0x1ff) # device present
no_psmouse:
#include "../../i386/boot/edd.S"
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 5fb9707..647610e 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc4
-# Thu Aug 24 21:05:55 2006
+# Linux kernel version: 2.6.18-git5
+# Tue Sep 26 09:30:47 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
@@ -19,6 +19,7 @@
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -38,16 +39,16 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -56,12 +57,12 @@
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -160,6 +161,7 @@
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -307,18 +309,23 @@
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_SUBTREES is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -345,7 +352,6 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -487,6 +493,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
@@ -508,12 +515,13 @@
# CONFIG_SCSI_LOGGING is not set
#
-# SCSI Transport Attributes
+# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
@@ -532,29 +540,14 @@
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
-CONFIG_SCSI_SATA=y
-CONFIG_SCSI_SATA_AHCI=y
-CONFIG_SCSI_SATA_SVW=y
-CONFIG_SCSI_ATA_PIIX=y
-# CONFIG_SCSI_SATA_MV is not set
-CONFIG_SCSI_SATA_NV=y
-# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-CONFIG_SCSI_SATA_SIL=y
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-CONFIG_SCSI_SATA_VIA=y
-# CONFIG_SCSI_SATA_VITESSE is not set
-CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -563,6 +556,7 @@
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -573,6 +567,62 @@
# CONFIG_SCSI_DEBUG is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SVW=y
+CONFIG_ATA_PIIX=y
+# CONFIG_SATA_MV is not set
+CONFIG_SATA_NV=y
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+CONFIG_SATA_VIA=y
+# CONFIG_SATA_VITESSE is not set
+CONFIG_SATA_INTEL_COMBINED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+
+#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
@@ -678,6 +728,7 @@
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=y
CONFIG_FORCEDETH=y
+# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
@@ -714,6 +765,7 @@
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
+# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
@@ -1036,6 +1088,7 @@
# Open Sound System
#
CONFIG_SOUND_PRIME=y
+CONFIG_OSS_OBSOLETE_DRIVER=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
@@ -1046,7 +1099,6 @@
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
#
# USB support
@@ -1203,7 +1255,6 @@
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
-# CONFIG_IPATH_CORE is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1449,10 +1500,6 @@
# CONFIG_CRYPTO is not set
#
-# Hardware crypto devices
-#
-
-#
# Library routines
#
# CONFIG_CRC_CCITT is not set
diff --git a/arch/x86_64/ia32/ia32_aout.c b/arch/x86_64/ia32/ia32_aout.c
index 3bf58af..396d3c1 100644
--- a/arch/x86_64/ia32/ia32_aout.c
+++ b/arch/x86_64/ia32/ia32_aout.c
@@ -333,7 +333,8 @@
return error;
}
- error = bprm->file->f_op->read(bprm->file, (char *)text_addr,
+ error = bprm->file->f_op->read(bprm->file,
+ (char __user *)text_addr,
ex.a_text+ex.a_data, &pos);
if ((signed long)error < 0) {
send_sig(SIGKILL, current, 0);
@@ -366,7 +367,8 @@
down_write(¤t->mm->mmap_sem);
do_brk(N_TXTADDR(ex), ex.a_text+ex.a_data);
up_write(¤t->mm->mmap_sem);
- bprm->file->f_op->read(bprm->file,(char *)N_TXTADDR(ex),
+ bprm->file->f_op->read(bprm->file,
+ (char __user *)N_TXTADDR(ex),
ex.a_text+ex.a_data, &pos);
flush_icache_range((unsigned long) N_TXTADDR(ex),
(unsigned long) N_TXTADDR(ex) +
@@ -477,7 +479,7 @@
do_brk(start_addr, ex.a_text + ex.a_data + ex.a_bss);
up_write(¤t->mm->mmap_sem);
- file->f_op->read(file, (char *)start_addr,
+ file->f_op->read(file, (char __user *)start_addr,
ex.a_text + ex.a_data, &pos);
flush_icache_range((unsigned long) start_addr,
(unsigned long) start_addr + ex.a_text + ex.a_data);
diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c
index 25e5ca2..a6ba995 100644
--- a/arch/x86_64/ia32/ia32_signal.c
+++ b/arch/x86_64/ia32/ia32_signal.c
@@ -113,25 +113,19 @@
}
asmlinkage long
-sys32_sigsuspend(int history0, int history1, old_sigset_t mask,
- struct pt_regs *regs)
+sys32_sigsuspend(int history0, int history1, old_sigset_t mask)
{
- sigset_t saveset;
-
mask &= _BLOCKABLE;
spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
+ current->saved_sigmask = current->blocked;
siginitset(¤t->blocked, mask);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- regs->rax = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
}
asmlinkage long
@@ -437,15 +431,7 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
- {
- struct exec_domain *ed = current_thread_info()->exec_domain;
- err |= __put_user((ed
- && ed->signal_invmap
- && sig < 32
- ? ed->signal_invmap[sig]
- : sig),
- &frame->sig);
- }
+ err |= __put_user(sig, &frame->sig);
if (err)
goto give_sigsegv;
@@ -492,6 +478,11 @@
regs->rsp = (unsigned long) frame;
regs->rip = (unsigned long) ka->sa.sa_handler;
+ /* Make -mregparm=3 work */
+ regs->rax = sig;
+ regs->rdx = 0;
+ regs->rcx = 0;
+
asm volatile("movl %0,%%ds" :: "r" (__USER32_DS));
asm volatile("movl %0,%%es" :: "r" (__USER32_DS));
@@ -499,20 +490,20 @@
regs->ss = __USER32_DS;
set_fs(USER_DS);
- regs->eflags &= ~TF_MASK;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
+ regs->eflags &= ~TF_MASK;
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
#if DEBUG_SIG
printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
current->comm, current->pid, frame, regs->rip, frame->pretcode);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
- return 0;
+ return -EFAULT;
}
int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
@@ -595,18 +586,18 @@
regs->ss = __USER32_DS;
set_fs(USER_DS);
- regs->eflags &= ~TF_MASK;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
+ regs->eflags &= ~TF_MASK;
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
#if DEBUG_SIG
printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
current->comm, current->pid, frame, regs->rip, frame->pretcode);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
- return 0;
+ return -EFAULT;
}
diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S
index 5d4a7d1..b4aa875 100644
--- a/arch/x86_64/ia32/ia32entry.S
+++ b/arch/x86_64/ia32/ia32entry.S
@@ -71,6 +71,7 @@
*/
ENTRY(ia32_sysenter_target)
CFI_STARTPROC32 simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,0
CFI_REGISTER rsp,rbp
swapgs
@@ -186,6 +187,7 @@
*/
ENTRY(ia32_cstar_target)
CFI_STARTPROC32 simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,PDA_STACKOFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
@@ -293,6 +295,7 @@
ENTRY(ia32_syscall)
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-RIP
/*CFI_REL_OFFSET ss,SS-RIP*/
CFI_REL_OFFSET rsp,RSP-RIP
@@ -370,6 +373,7 @@
popq %r11
CFI_ENDPROC
CFI_STARTPROC32 simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-ARGOFFSET
CFI_REL_OFFSET rax,RAX-ARGOFFSET
CFI_REL_OFFSET rcx,RCX-ARGOFFSET
@@ -703,8 +707,8 @@
.quad sys_readlinkat /* 305 */
.quad sys_fchmodat
.quad sys_faccessat
- .quad quiet_ni_syscall /* pselect6 for now */
- .quad quiet_ni_syscall /* ppoll for now */
+ .quad compat_sys_pselect6
+ .quad compat_sys_ppoll
.quad sys_unshare /* 310 */
.quad compat_sys_set_robust_list
.quad compat_sys_get_robust_list
@@ -713,4 +717,5 @@
.quad sys_tee
.quad compat_sys_vmsplice
.quad compat_sys_move_pages
+ .quad sys_getcpu
ia32_syscall_end:
diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86_64/ia32/ptrace32.c
index 659c072..d18198e 100644
--- a/arch/x86_64/ia32/ptrace32.c
+++ b/arch/x86_64/ia32/ptrace32.c
@@ -117,6 +117,10 @@
if ((0x5454 >> ((val >> (16 + 4*i)) & 0xf)) & 1)
return -EIO;
child->thread.debugreg7 = val;
+ if (val)
+ set_tsk_thread_flag(child, TIF_DEBUG);
+ else
+ clear_tsk_thread_flag(child, TIF_DEBUG);
break;
default:
@@ -371,8 +375,10 @@
ret = -EIO;
if (!access_ok(VERIFY_READ, u, sizeof(*u)))
break;
- /* no checking to be bug-to-bug compatible with i386 */
- __copy_from_user(&child->thread.i387.fxsave, u, sizeof(*u));
+ /* no checking to be bug-to-bug compatible with i386. */
+ /* but silence warning */
+ if (__copy_from_user(&child->thread.i387.fxsave, u, sizeof(*u)))
+ ;
set_stopped_child_used_math(child);
child->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
ret = 0;
diff --git a/arch/x86_64/ia32/sys_ia32.c b/arch/x86_64/ia32/sys_ia32.c
index 9c13099..f280d36 100644
--- a/arch/x86_64/ia32/sys_ia32.c
+++ b/arch/x86_64/ia32/sys_ia32.c
@@ -60,6 +60,7 @@
#include <linux/highuid.h>
#include <linux/vmalloc.h>
#include <linux/fsnotify.h>
+#include <linux/sysctl.h>
#include <asm/mman.h>
#include <asm/types.h>
#include <asm/uaccess.h>
@@ -389,7 +390,9 @@
}
}
set_fs (KERNEL_DS);
- ret = sys_rt_sigprocmask(how, set ? &s : NULL, oset ? &s : NULL,
+ ret = sys_rt_sigprocmask(how,
+ set ? (sigset_t __user *)&s : NULL,
+ oset ? (sigset_t __user *)&s : NULL,
sigsetsize);
set_fs (old_fs);
if (ret) return ret;
@@ -541,7 +544,7 @@
int bitcount = 0;
set_fs (KERNEL_DS);
- ret = sys_sysinfo(&s);
+ ret = sys_sysinfo((struct sysinfo __user *)&s);
set_fs (old_fs);
/* Check to see if any memory value is too large for 32-bit and scale
@@ -589,7 +592,7 @@
mm_segment_t old_fs = get_fs ();
set_fs (KERNEL_DS);
- ret = sys_sched_rr_get_interval(pid, &t);
+ ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t);
set_fs (old_fs);
if (put_compat_timespec(&t, interval))
return -EFAULT;
@@ -605,7 +608,7 @@
mm_segment_t old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_rt_sigpending(&s, sigsetsize);
+ ret = sys_rt_sigpending((sigset_t __user *)&s, sigsetsize);
set_fs (old_fs);
if (!ret) {
switch (_NSIG_WORDS) {
@@ -630,7 +633,7 @@
if (copy_siginfo_from_user32(&info, uinfo))
return -EFAULT;
set_fs (KERNEL_DS);
- ret = sys_rt_sigqueueinfo(pid, sig, &info);
+ ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *)&info);
set_fs (old_fs);
return ret;
}
@@ -645,7 +648,7 @@
}
-#ifdef CONFIG_SYSCTL
+#ifdef CONFIG_SYSCTL_SYSCALL
struct sysctl_ia32 {
unsigned int name;
int nlen;
@@ -666,9 +669,6 @@
size_t oldlen;
int __user *namep;
long ret;
- extern int do_sysctl(int *name, int nlen, void *oldval, size_t *oldlenp,
- void *newval, size_t newlen);
-
if (copy_from_user(&a32, args32, sizeof (a32)))
return -EFAULT;
@@ -692,7 +692,8 @@
set_fs(KERNEL_DS);
lock_kernel();
- ret = do_sysctl(namep, a32.nlen, oldvalp, &oldlen, newvalp, (size_t) a32.newlen);
+ ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *)&oldlen,
+ newvalp, (size_t) a32.newlen);
unlock_kernel();
set_fs(old_fs);
@@ -743,7 +744,8 @@
return -EFAULT;
set_fs(KERNEL_DS);
- ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count);
+ ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL,
+ count);
set_fs(old_fs);
if (offset && put_user(of, offset))
@@ -778,7 +780,7 @@
asmlinkage long sys32_olduname(struct oldold_utsname __user * name)
{
- int error;
+ int err;
if (!name)
return -EFAULT;
@@ -787,27 +789,31 @@
down_read(&uts_sem);
- error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
- __put_user(0,name->sysname+__OLD_UTS_LEN);
- __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
- __put_user(0,name->nodename+__OLD_UTS_LEN);
- __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
- __put_user(0,name->release+__OLD_UTS_LEN);
- __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
- __put_user(0,name->version+__OLD_UTS_LEN);
+ err = __copy_to_user(&name->sysname,&system_utsname.sysname,
+ __OLD_UTS_LEN);
+ err |= __put_user(0,name->sysname+__OLD_UTS_LEN);
+ err |= __copy_to_user(&name->nodename,&system_utsname.nodename,
+ __OLD_UTS_LEN);
+ err |= __put_user(0,name->nodename+__OLD_UTS_LEN);
+ err |= __copy_to_user(&name->release,&system_utsname.release,
+ __OLD_UTS_LEN);
+ err |= __put_user(0,name->release+__OLD_UTS_LEN);
+ err |= __copy_to_user(&name->version,&system_utsname.version,
+ __OLD_UTS_LEN);
+ err |= __put_user(0,name->version+__OLD_UTS_LEN);
{
char *arch = "x86_64";
if (personality(current->personality) == PER_LINUX32)
arch = "i686";
- __copy_to_user(&name->machine,arch,strlen(arch)+1);
+ err |= __copy_to_user(&name->machine,arch,strlen(arch)+1);
}
up_read(&uts_sem);
- error = error ? -EFAULT : 0;
+ err = err ? -EFAULT : 0;
- return error;
+ return err;
}
long sys32_uname(struct old_utsname __user * name)
@@ -831,7 +837,7 @@
seg = get_fs();
set_fs(KERNEL_DS);
- ret = sys_ustat(dev,&u);
+ ret = sys_ustat(dev, (struct ustat __user *)&u);
set_fs(seg);
if (ret >= 0) {
if (!access_ok(VERIFY_WRITE,u32p,sizeof(struct ustat32)) ||
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index b5aaeaf..3c7cbff 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -11,7 +11,7 @@
pci-dma.o pci-nommu.o alternative.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
-obj-$(CONFIG_X86_MCE) += mce.o
+obj-$(CONFIG_X86_MCE) += mce.o therm_throt.o
obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o
obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o
obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/
@@ -20,8 +20,8 @@
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o
-obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
-obj-$(CONFIG_X86_IO_APIC) += io_apic.o mpparse.o \
+obj-y += apic.o nmi.o
+obj-y += io_apic.o mpparse.o \
genapic.o genapic_cluster.o genapic_flat.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
@@ -39,12 +39,14 @@
obj-$(CONFIG_AUDIT) += audit.o
obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_PCI) += early-quirks.o
obj-y += topology.o
obj-y += intel_cacheinfo.o
CFLAGS_vsyscall.o := $(PROFILING) -g0
+therm_throt-y += ../../i386/kernel/cpu/mcheck/therm_throt.o
bootflag-y += ../../i386/kernel/bootflag.o
cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o
topology-y += ../../i386/kernel/topology.o
@@ -54,4 +56,3 @@
i8237-y += ../../i386/kernel/i8237.o
msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o
alternative-y += ../../i386/kernel/alternative.o
-
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index 58af8e7..b487396 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -17,6 +17,7 @@
#include <linux/pci_ids.h>
#include <linux/pci.h>
#include <linux/bitops.h>
+#include <linux/ioport.h>
#include <asm/e820.h>
#include <asm/io.h>
#include <asm/proto.h>
@@ -33,6 +34,18 @@
int fix_aperture __initdata = 1;
+static struct resource gart_resource = {
+ .name = "GART",
+ .flags = IORESOURCE_MEM,
+};
+
+static void __init insert_aperture_resource(u32 aper_base, u32 aper_size)
+{
+ gart_resource.start = aper_base;
+ gart_resource.end = aper_base + aper_size - 1;
+ insert_resource(&iomem_resource, &gart_resource);
+}
+
/* This code runs before the PCI subsystem is initialized, so just
access the northbridge directly. */
@@ -48,7 +61,7 @@
/*
* Aperture has to be naturally aligned. This means an 2GB aperture won't
- * have much chances to find a place in the lower 4GB of memory.
+ * have much chance of finding a place in the lower 4GB of memory.
* Unfortunately we cannot move it up because that would make the
* IOMMU useless.
*/
@@ -62,6 +75,7 @@
}
printk("Mapping aperture over %d KB of RAM @ %lx\n",
aper_size >> 10, __pa(p));
+ insert_aperture_resource((u32)__pa(p), aper_size);
return (u32)__pa(p);
}
@@ -198,7 +212,7 @@
u64 aper_base, last_aper_base = 0;
int valid_agp = 0;
- if (iommu_aperture_disabled || !fix_aperture)
+ if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed())
return;
printk("Checking aperture...\n");
@@ -233,8 +247,13 @@
last_aper_base = aper_base;
}
- if (!fix && !fallback_aper_force)
+ if (!fix && !fallback_aper_force) {
+ if (last_aper_base) {
+ unsigned long n = (32 * 1024 * 1024) << last_aper_order;
+ insert_aperture_resource((u32)last_aper_base, n);
+ }
return;
+ }
if (!fallback_aper_force)
aper_alloc = search_agp_bridge(&aper_order, &valid_agp);
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 2b8cef0..135ff25 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -25,6 +25,7 @@
#include <linux/kernel_stat.h>
#include <linux/sysdev.h>
#include <linux/module.h>
+#include <linux/ioport.h>
#include <asm/atomic.h>
#include <asm/smp.h>
@@ -36,13 +37,20 @@
#include <asm/idle.h>
#include <asm/proto.h>
#include <asm/timex.h>
+#include <asm/apic.h>
+int apic_mapped;
int apic_verbosity;
int apic_runs_main_timer;
int apic_calibrate_pmtmr __initdata;
int disable_apic_timer __initdata;
+static struct resource lapic_resource = {
+ .name = "Local APIC",
+ .flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
/*
* cpu_mask that denotes the CPUs that needs timer interrupt coming in as
* IPIs in place of local APIC timers
@@ -136,72 +144,40 @@
apic_read(APIC_ESR);
}
-void __init connect_bsp_APIC(void)
-{
- if (pic_mode) {
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
- /*
- * PIC mode, enable APIC mode in the IMCR, i.e.
- * connect BSP's local APIC to INT and NMI lines.
- */
- apic_printk(APIC_VERBOSE, "leaving PIC mode, enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
- }
-}
-
void disconnect_bsp_APIC(int virt_wire_setup)
{
- if (pic_mode) {
- /*
- * Put the board back into PIC mode (has an effect
- * only on certain older boards). Note that APIC
- * interrupts, including IPIs, won't work beyond
- * this point! The only exception are INIT IPIs.
- */
- apic_printk(APIC_QUIET, "disabling APIC mode, entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
+ /* Go back to Virtual Wire compatibility mode */
+ unsigned long value;
+
+ /* For the spurious interrupt use vector F, and enable it */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ value |= APIC_SPIV_APIC_ENABLED;
+ value |= 0xf;
+ apic_write(APIC_SPIV, value);
+
+ if (!virt_wire_setup) {
+ /* For LVT0 make it edge triggered, active high, external and enabled */
+ value = apic_read(APIC_LVT0);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+ APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+ apic_write(APIC_LVT0, value);
+ } else {
+ /* Disable LVT0 */
+ apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
- else {
- /* Go back to Virtual Wire compatibility mode */
- unsigned long value;
- /* For the spurious interrupt use vector F, and enable it */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
- value |= 0xf;
- apic_write(APIC_SPIV, value);
-
- if (!virt_wire_setup) {
- /* For LVT0 make it edge triggered, active high, external and enabled */
- value = apic_read(APIC_LVT0);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write(APIC_LVT0, value);
- }
- else {
- /* Disable LVT0 */
- apic_write(APIC_LVT0, APIC_LVT_MASKED);
- }
-
- /* For LVT1 make it edge triggered, active high, nmi and enabled */
- value = apic_read(APIC_LVT1);
- value &= ~(
- APIC_MODE_MASK | APIC_SEND_PENDING |
+ /* For LVT1 make it edge triggered, active high, nmi and enabled */
+ value = apic_read(APIC_LVT1);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write(APIC_LVT1, value);
- }
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+ apic_write(APIC_LVT1, value);
}
void disable_local_APIC(void)
@@ -297,8 +273,6 @@
| APIC_DM_INIT);
}
-extern void __error_in_apic_c (void);
-
/*
* An initial setup of the virtual wire mode.
*/
@@ -345,8 +319,7 @@
value = apic_read(APIC_LVR);
- if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f)
- __error_in_apic_c();
+ BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
/*
* Double-check whether this APIC is really registered.
@@ -399,32 +372,8 @@
*/
value |= APIC_SPIV_APIC_ENABLED;
- /*
- * Some unknown Intel IO/APIC (or APIC) errata is biting us with
- * certain networking cards. If high frequency interrupts are
- * happening on a particular IOAPIC pin, plus the IOAPIC routing
- * entry is masked/unmasked at a high rate as well then sooner or
- * later IOAPIC line gets 'stuck', no more interrupts are received
- * from the device. If focus CPU is disabled then the hang goes
- * away, oh well :-(
- *
- * [ This bug can be reproduced easily with a level-triggered
- * PCI Ne2000 networking cards and PII/PIII processors, dual
- * BX chipset. ]
- */
- /*
- * Actually disabling the focus CPU check just makes the hang less
- * frequent as it makes the interrupt distributon model be more
- * like LRU than MRU (the short-term load is more even across CPUs).
- * See also the comment in end_level_ioapic_irq(). --macro
- */
-#if 1
- /* Enable focus processor (bit==0) */
- value &= ~APIC_SPIV_FOCUS_DISABLED;
-#else
- /* Disable focus processor (bit==1) */
- value |= APIC_SPIV_FOCUS_DISABLED;
-#endif
+ /* We always use processor focus */
+
/*
* Set spurious IRQ vector
*/
@@ -442,7 +391,7 @@
* TODO: set up through-local-APIC from through-I/O-APIC? --macro
*/
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
- if (!smp_processor_id() && (pic_mode || !value)) {
+ if (!smp_processor_id() && !value) {
value = APIC_DM_EXTINT;
apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id());
} else {
@@ -479,8 +428,7 @@
}
nmi_watchdog_default();
- if (nmi_watchdog == NMI_LOCAL_APIC)
- setup_apic_nmi_watchdog();
+ setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
@@ -527,8 +475,7 @@
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
- local_save_flags(flags);
- local_irq_disable();
+ local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
return 0;
@@ -606,18 +553,24 @@
static int __init apic_set_verbosity(char *str)
{
+ if (str == NULL) {
+ skip_ioapic_setup = 0;
+ ioapic_force = 1;
+ return 0;
+ }
if (strcmp("debug", str) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
- else
+ else {
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug", str);
+ " use apic=verbose or apic=debug\n", str);
+ return -EINVAL;
+ }
- return 1;
+ return 0;
}
-
-__setup("apic=", apic_set_verbosity);
+early_param("apic", apic_set_verbosity);
/*
* Detect and enable local APICs on non-SMP boards.
@@ -638,6 +591,40 @@
return 0;
}
+#ifdef CONFIG_X86_IO_APIC
+static struct resource * __init ioapic_setup_resources(void)
+{
+#define IOAPIC_RESOURCE_NAME_SIZE 11
+ unsigned long n;
+ struct resource *res;
+ char *mem;
+ int i;
+
+ if (nr_ioapics <= 0)
+ return NULL;
+
+ n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
+ n *= nr_ioapics;
+
+ res = alloc_bootmem(n);
+
+ if (!res)
+ return NULL;
+
+ memset(res, 0, n);
+ mem = (void *)&res[nr_ioapics];
+
+ for (i = 0; i < nr_ioapics; i++) {
+ res[i].name = mem;
+ res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i);
+ mem += IOAPIC_RESOURCE_NAME_SIZE;
+ }
+
+ return res;
+}
+#endif
+
void __init init_apic_mappings(void)
{
unsigned long apic_phys;
@@ -654,19 +641,26 @@
apic_phys = mp_lapic_addr;
set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+ apic_mapped = 1;
apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys);
+ /* Put local APIC into the resource map. */
+ lapic_resource.start = apic_phys;
+ lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+ insert_resource(&iomem_resource, &lapic_resource);
+
/*
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-#ifdef CONFIG_X86_IO_APIC
{
unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
int i;
+ struct resource *ioapic_res;
+ ioapic_res = ioapic_setup_resources();
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
ioapic_phys = mp_ioapics[i].mpc_apicaddr;
@@ -678,9 +672,15 @@
apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n",
__fix_to_virt(idx), ioapic_phys);
idx++;
+
+ if (ioapic_res) {
+ ioapic_res->start = ioapic_phys;
+ ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+ insert_resource(&iomem_resource, ioapic_res);
+ ioapic_res++;
+ }
}
}
-#endif
}
/*
@@ -951,7 +951,7 @@
* We take the 'long' return path, and there every subsystem
* grabs the appropriate locks (kernel lock/ irq lock).
*
- * we might want to decouple profiling from the 'long path',
+ * We might want to decouple profiling from the 'long path',
* and do the profiling totally in assembly.
*
* Currently this isn't too much of an issue (performance wise),
@@ -1123,19 +1123,15 @@
verify_local_APIC();
- connect_bsp_APIC();
-
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id));
setup_local_APIC();
-#ifdef CONFIG_X86_IO_APIC
if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
+ setup_IO_APIC();
else
nr_ioapics = 0;
-#endif
setup_boot_APIC_clock();
check_nmi_watchdog();
return 0;
@@ -1144,14 +1140,17 @@
static __init int setup_disableapic(char *str)
{
disable_apic = 1;
- return 1;
-}
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ return 0;
+}
+early_param("disableapic", setup_disableapic);
+/* same as disableapic, for compatibility */
static __init int setup_nolapic(char *str)
{
- disable_apic = 1;
- return 1;
+ return setup_disableapic(str);
}
+early_param("nolapic", setup_nolapic);
static __init int setup_noapictimer(char *str)
{
@@ -1184,11 +1183,5 @@
}
__setup("apicpmtimer", setup_apicpmtimer);
-/* dummy parsing: see setup.c */
-
-__setup("disableapic", setup_disableapic);
-__setup("nolapic", setup_nolapic); /* same as disableapic, for compatibility */
-
__setup("noapictimer", setup_noapictimer);
-/* no "lapic" flag - we only use the lapic when the BIOS tells us so. */
diff --git a/arch/x86_64/kernel/crash.c b/arch/x86_64/kernel/crash.c
index d8d5750..3525f88 100644
--- a/arch/x86_64/kernel/crash.c
+++ b/arch/x86_64/kernel/crash.c
@@ -23,6 +23,7 @@
#include <asm/nmi.h>
#include <asm/hw_irq.h>
#include <asm/mach_apic.h>
+#include <asm/kdebug.h>
/* This keeps a track of which one is crashing cpu. */
static int crashing_cpu;
@@ -68,7 +69,7 @@
* for the data I pass, and I need tags
* on the data to indicate what information I have
* squirrelled away. ELF notes happen to provide
- * all of that that no need to invent something new.
+ * all of that, no need to invent something new.
*/
buf = (u32*)per_cpu_ptr(crash_notes, cpu);
@@ -95,15 +96,25 @@
#ifdef CONFIG_SMP
static atomic_t waiting_for_crash_ipi;
-static int crash_nmi_callback(struct pt_regs *regs, int cpu)
+static int crash_nmi_callback(struct notifier_block *self,
+ unsigned long val, void *data)
{
+ struct pt_regs *regs;
+ int cpu;
+
+ if (val != DIE_NMI_IPI)
+ return NOTIFY_OK;
+
+ regs = ((struct die_args *)data)->regs;
+ cpu = raw_smp_processor_id();
+
/*
* Don't do anything if this handler is invoked on crashing cpu.
* Otherwise, system will completely hang. Crashing cpu can get
* an NMI if system was initially booted with nmi_watchdog parameter.
*/
if (cpu == crashing_cpu)
- return 1;
+ return NOTIFY_STOP;
local_irq_disable();
crash_save_this_cpu(regs, cpu);
@@ -127,12 +138,17 @@
* cpu hotplug shouldn't matter.
*/
+static struct notifier_block crash_nmi_nb = {
+ .notifier_call = crash_nmi_callback,
+};
+
static void nmi_shootdown_cpus(void)
{
unsigned long msecs;
atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
- set_nmi_callback(crash_nmi_callback);
+ if (register_die_notifier(&crash_nmi_nb))
+ return; /* return what? */
/*
* Ensure the new callback function is set before sending
@@ -178,9 +194,7 @@
if(cpu_has_apic)
disable_local_APIC();
-#if defined(CONFIG_X86_IO_APIC)
disable_IO_APIC();
-#endif
crash_save_self(regs);
}
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index 708a3cd..b3f0908 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -25,6 +25,8 @@
#include <asm/bootsetup.h>
#include <asm/sections.h>
+struct e820map e820 __initdata;
+
/*
* PFN of last memory page.
*/
@@ -41,7 +43,7 @@
/*
* Last pfn which the user wants to use.
*/
-unsigned long end_user_pfn = MAXMEM>>PAGE_SHIFT;
+static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT;
extern struct resource code_resource, data_resource;
@@ -70,12 +72,7 @@
return 1;
}
#endif
- /* kernel code + 640k memory hole (later should not be needed, but
- be paranoid for now) */
- if (last >= 640*1024 && addr < 1024*1024) {
- *addrp = 1024*1024;
- return 1;
- }
+ /* kernel code */
if (last >= __pa_symbol(&_text) && last < __pa_symbol(&_end)) {
*addrp = __pa_symbol(&_end);
return 1;
@@ -165,59 +162,14 @@
return -1UL;
}
-/*
- * Free bootmem based on the e820 table for a node.
- */
-void __init e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned long end)
-{
- int i;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- unsigned long last, addr;
-
- if (ei->type != E820_RAM ||
- ei->addr+ei->size <= start ||
- ei->addr >= end)
- continue;
-
- addr = round_up(ei->addr, PAGE_SIZE);
- if (addr < start)
- addr = start;
-
- last = round_down(ei->addr + ei->size, PAGE_SIZE);
- if (last >= end)
- last = end;
-
- if (last > addr && last-addr >= PAGE_SIZE)
- free_bootmem_node(pgdat, addr, last-addr);
- }
-}
-
/*
* Find the highest page frame number we have available
*/
unsigned long __init e820_end_of_ram(void)
{
- int i;
unsigned long end_pfn = 0;
+ end_pfn = find_max_pfn_with_active_regions();
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- unsigned long start, end;
-
- start = round_up(ei->addr, PAGE_SIZE);
- end = round_down(ei->addr + ei->size, PAGE_SIZE);
- if (start >= end)
- continue;
- if (ei->type == E820_RAM) {
- if (end > end_pfn<<PAGE_SHIFT)
- end_pfn = end>>PAGE_SHIFT;
- } else {
- if (end > end_pfn_map<<PAGE_SHIFT)
- end_pfn_map = end>>PAGE_SHIFT;
- }
- }
-
if (end_pfn > end_pfn_map)
end_pfn_map = end_pfn;
if (end_pfn_map > MAXMEM>>PAGE_SHIFT)
@@ -227,43 +179,10 @@
if (end_pfn > end_pfn_map)
end_pfn = end_pfn_map;
+ printk("end_pfn_map = %lu\n", end_pfn_map);
return end_pfn;
}
-/*
- * Compute how much memory is missing in a range.
- * Unlike the other functions in this file the arguments are in page numbers.
- */
-unsigned long __init
-e820_hole_size(unsigned long start_pfn, unsigned long end_pfn)
-{
- unsigned long ram = 0;
- unsigned long start = start_pfn << PAGE_SHIFT;
- unsigned long end = end_pfn << PAGE_SHIFT;
- int i;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- unsigned long last, addr;
-
- if (ei->type != E820_RAM ||
- ei->addr+ei->size <= start ||
- ei->addr >= end)
- continue;
-
- addr = round_up(ei->addr, PAGE_SIZE);
- if (addr < start)
- addr = start;
-
- last = round_down(ei->addr + ei->size, PAGE_SIZE);
- if (last >= end)
- last = end;
-
- if (last > addr)
- ram += last - addr;
- }
- return ((end - start) - ram) >> PAGE_SHIFT;
-}
-
/*
* Mark e820 reserved areas as busy for the resource manager.
*/
@@ -345,6 +264,49 @@
}
}
+/* Walk the e820 map and register active regions within a node */
+void __init
+e820_register_active_regions(int nid, unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ int i;
+ unsigned long ei_startpfn, ei_endpfn;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT;
+ ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE)
+ >> PAGE_SHIFT;
+
+ /* Skip map entries smaller than a page */
+ if (ei_startpfn > ei_endpfn)
+ continue;
+
+ /* Check if end_pfn_map should be updated */
+ if (ei->type != E820_RAM && ei_endpfn > end_pfn_map)
+ end_pfn_map = ei_endpfn;
+
+ /* Skip if map is outside the node */
+ if (ei->type != E820_RAM ||
+ ei_endpfn <= start_pfn ||
+ ei_startpfn >= end_pfn)
+ continue;
+
+ /* Check for overlaps */
+ if (ei_startpfn < start_pfn)
+ ei_startpfn = start_pfn;
+ if (ei_endpfn > end_pfn)
+ ei_endpfn = end_pfn;
+
+ /* Obey end_user_pfn to save on memmap */
+ if (ei_startpfn >= end_user_pfn)
+ continue;
+ if (ei_endpfn > end_user_pfn)
+ ei_endpfn = end_user_pfn;
+
+ add_active_range(nid, ei_startpfn, ei_endpfn);
+ }
+}
+
/*
* Add a memory region to the kernel e820 map.
*/
@@ -565,13 +527,6 @@
* If we're lucky and live on a modern system, the setup code
* will have given us a memory map that we can use to properly
* set up memory. If we aren't, we'll fake a memory map.
- *
- * We check to see that the memory map contains at least 2 elements
- * before we'll use it, because the detection code in setup.S may
- * not be perfect and most every PC known to man has two memory
- * regions: one from 0 to 640k, and one from 1mb up. (The IBM
- * thinkpad 560x, for example, does not cooperate with the memory
- * detection code.)
*/
static int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
{
@@ -589,34 +544,19 @@
if (start > end)
return -1;
- /*
- * Some BIOSes claim RAM in the 640k - 1M region.
- * Not right. Fix it up.
- *
- * This should be removed on Hammer which is supposed to not
- * have non e820 covered ISA mappings there, but I had some strange
- * problems so it stays for now. -AK
- */
- if (type == E820_RAM) {
- if (start < 0x100000ULL && end > 0xA0000ULL) {
- if (start < 0xA0000ULL)
- add_memory_region(start, 0xA0000ULL-start, type);
- if (end <= 0x100000ULL)
- continue;
- start = 0x100000ULL;
- size = end - start;
- }
- }
-
add_memory_region(start, size, type);
} while (biosmap++,--nr_map);
return 0;
}
+void early_panic(char *msg)
+{
+ early_printk(msg);
+ panic(msg);
+}
+
void __init setup_memory_region(void)
{
- char *who = "BIOS-e820";
-
/*
* Try to copy the BIOS-supplied E820-map.
*
@@ -624,51 +564,70 @@
* the next section from 1mb->appropriate_mem_k
*/
sanitize_e820_map(E820_MAP, &E820_MAP_NR);
- if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
- unsigned long mem_size;
-
- /* compare results from other methods and take the greater */
- if (ALT_MEM_K < EXT_MEM_K) {
- mem_size = EXT_MEM_K;
- who = "BIOS-88";
- } else {
- mem_size = ALT_MEM_K;
- who = "BIOS-e801";
- }
-
- e820.nr_map = 0;
- add_memory_region(0, LOWMEMSIZE(), E820_RAM);
- add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
- }
+ if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0)
+ early_panic("Cannot find a valid memory map");
printk(KERN_INFO "BIOS-provided physical RAM map:\n");
- e820_print_map(who);
+ e820_print_map("BIOS-e820");
}
-void __init parse_memopt(char *p, char **from)
-{
- end_user_pfn = memparse(p, from);
- end_user_pfn >>= PAGE_SHIFT;
-}
-
-void __init parse_memmapopt(char *p, char **from)
+static int __init parse_memopt(char *p)
{
+ if (!p)
+ return -EINVAL;
+ end_user_pfn = memparse(p, &p);
+ end_user_pfn >>= PAGE_SHIFT;
+ return 0;
+}
+early_param("mem", parse_memopt);
+
+static int userdef __initdata;
+
+static int __init parse_memmap_opt(char *p)
+{
+ char *oldp;
unsigned long long start_at, mem_size;
- mem_size = memparse(p, from);
- p = *from;
+ if (!strcmp(p, "exactmap")) {
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we
+ * still need to know the real mem
+ * size before original memory map is
+ * reset.
+ */
+ saved_max_pfn = e820_end_of_ram();
+#endif
+ end_pfn_map = 0;
+ e820.nr_map = 0;
+ userdef = 1;
+ return 0;
+ }
+
+ oldp = p;
+ mem_size = memparse(p, &p);
+ if (p == oldp)
+ return -EINVAL;
if (*p == '@') {
- start_at = memparse(p+1, from);
+ start_at = memparse(p+1, &p);
add_memory_region(start_at, mem_size, E820_RAM);
} else if (*p == '#') {
- start_at = memparse(p+1, from);
+ start_at = memparse(p+1, &p);
add_memory_region(start_at, mem_size, E820_ACPI);
} else if (*p == '$') {
- start_at = memparse(p+1, from);
+ start_at = memparse(p+1, &p);
add_memory_region(start_at, mem_size, E820_RESERVED);
} else {
end_user_pfn = (mem_size >> PAGE_SHIFT);
}
- p = *from;
+ return *p == '\0' ? 0 : -EINVAL;
+}
+early_param("memmap", parse_memmap_opt);
+
+void finish_e820_parsing(void)
+{
+ if (userdef) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ e820_print_map("user");
+ }
}
unsigned long pci_mem_start = 0xaeedbabe;
diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c
new file mode 100644
index 0000000..208e38a
--- /dev/null
+++ b/arch/x86_64/kernel/early-quirks.c
@@ -0,0 +1,122 @@
+/* Various workarounds for chipset bugs.
+ This code runs very early and can't use the regular PCI subsystem
+ The entries are keyed to PCI bridges which usually identify chipsets
+ uniquely.
+ This is only for whole classes of chipsets with specific problems which
+ need early invasive action (e.g. before the timers are initialized).
+ Most PCI device specific workarounds can be done later and should be
+ in standard PCI quirks
+ Mainboard specific bugs should be handled by DMI entries.
+ CPU specific bugs in setup.c */
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/pci_ids.h>
+#include <asm/pci-direct.h>
+#include <asm/proto.h>
+#include <asm/dma.h>
+
+static void via_bugs(void)
+{
+#ifdef CONFIG_IOMMU
+ if ((end_pfn > MAX_DMA32_PFN || force_iommu) &&
+ !iommu_aperture_allowed) {
+ printk(KERN_INFO
+ "Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed\n");
+ iommu_aperture_disabled = 1;
+ }
+#endif
+}
+
+#ifdef CONFIG_ACPI
+
+static int nvidia_hpet_detected __initdata;
+
+static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+{
+ nvidia_hpet_detected = 1;
+ return 0;
+}
+#endif
+
+static void nvidia_bugs(void)
+{
+#ifdef CONFIG_ACPI
+ /*
+ * All timer overrides on Nvidia are
+ * wrong unless HPET is enabled.
+ */
+ nvidia_hpet_detected = 0;
+ acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+ if (nvidia_hpet_detected == 0) {
+ acpi_skip_timer_override = 1;
+ printk(KERN_INFO "Nvidia board "
+ "detected. Ignoring ACPI "
+ "timer override.\n");
+ }
+#endif
+ /* RED-PEN skip them on mptables too? */
+
+}
+
+static void ati_bugs(void)
+{
+#if 1 /* for testing */
+ printk("ATI board detected\n");
+#endif
+ /* No bugs right now */
+}
+
+struct chipset {
+ u16 vendor;
+ void (*f)(void);
+};
+
+static struct chipset early_qrk[] = {
+ { PCI_VENDOR_ID_NVIDIA, nvidia_bugs },
+ { PCI_VENDOR_ID_VIA, via_bugs },
+ { PCI_VENDOR_ID_ATI, ati_bugs },
+ {}
+};
+
+void __init early_quirks(void)
+{
+ int num, slot, func;
+
+ if (!early_pci_allowed())
+ return;
+
+ /* Poor man's PCI discovery */
+ for (num = 0; num < 32; num++) {
+ for (slot = 0; slot < 32; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 class;
+ u32 vendor;
+ u8 type;
+ int i;
+ class = read_pci_config(num,slot,func,
+ PCI_CLASS_REVISION);
+ if (class == 0xffffffff)
+ break;
+
+ if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ vendor = read_pci_config(num, slot, func,
+ PCI_VENDOR_ID);
+ vendor &= 0xffff;
+
+ for (i = 0; early_qrk[i].f; i++)
+ if (early_qrk[i].vendor == vendor) {
+ early_qrk[i].f();
+ return;
+ }
+
+ type = read_pci_config_byte(num, slot, func,
+ PCI_HEADER_TYPE);
+ if (!(type & 0x80))
+ break;
+ }
+ }
+ }
+}
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c
index 140051e..e22ecd5 100644
--- a/arch/x86_64/kernel/early_printk.c
+++ b/arch/x86_64/kernel/early_printk.c
@@ -215,20 +215,16 @@
static int __initdata keep_early;
-int __init setup_early_printk(char *opt)
+static int __init setup_early_printk(char *buf)
{
- char *space;
- char buf[256];
+ if (!buf)
+ return 0;
if (early_console_initialized)
- return 1;
+ return 0;
+ early_console_initialized = 1;
- strlcpy(buf,opt,sizeof(buf));
- space = strchr(buf, ' ');
- if (space)
- *space = 0;
-
- if (strstr(buf,"keep"))
+ if (!strcmp(buf,"keep"))
keep_early = 1;
if (!strncmp(buf, "serial", 6)) {
@@ -248,11 +244,12 @@
early_console = &simnow_console;
keep_early = 1;
}
- early_console_initialized = 1;
register_console(early_console);
return 0;
}
+early_param("earlyprintk", setup_early_printk);
+
void __init disable_early_printk(void)
{
if (!early_console_initialized || !early_console)
@@ -266,4 +263,3 @@
}
}
-__setup("earlyprintk=", setup_early_printk);
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index aa8d893..2802524 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -4,8 +4,6 @@
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
- *
- * $Id$
*/
/*
@@ -22,15 +20,25 @@
* at the top of the kernel process stack.
* - partial stack frame: partially saved registers upto R11.
* - full stack frame: Like partial stack frame, but all register saved.
- *
- * TODO:
- * - schedule it carefully for the final hardware.
+ *
+ * Some macro usage:
+ * - CFI macros are used to generate dwarf2 unwind information for better
+ * backtraces. They don't change any code.
+ * - SAVE_ALL/RESTORE_ALL - Save/restore all registers
+ * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify.
+ * There are unfortunately lots of special cases where some registers
+ * not touched. The macro is a big mess that should be cleaned up.
+ * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS.
+ * Gives a full stack frame.
+ * - ENTRY/END Define functions in the symbol table.
+ * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack
+ * frame that is otherwise undefined after a SYSCALL
+ * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
+ * - errorentry/paranoidentry/zeroentry - Define exception entry points.
*/
-#define ASSEMBLY 1
#include <linux/linkage.h>
#include <asm/segment.h>
-#include <asm/smp.h>
#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/dwarf2.h>
@@ -115,6 +123,7 @@
.macro CFI_DEFAULT_STACK start=1
.if \start
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8
.else
CFI_DEF_CFA_OFFSET SS+8
@@ -146,6 +155,10 @@
/* rdi: prev */
ENTRY(ret_from_fork)
CFI_DEFAULT_STACK
+ push kernel_eflags(%rip)
+ CFI_ADJUST_CFA_OFFSET 4
+ popf # reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET -4
call schedule_tail
GET_THREAD_INFO(%rcx)
testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
@@ -199,6 +212,7 @@
ENTRY(system_call)
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,PDA_STACKOFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
@@ -316,6 +330,7 @@
*/
ENTRY(int_ret_from_sys_call)
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-ARGOFFSET
/*CFI_REL_OFFSET ss,SS-ARGOFFSET*/
CFI_REL_OFFSET rsp,RSP-ARGOFFSET
@@ -476,6 +491,7 @@
*/
.macro _frame ref
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-\ref
/*CFI_REL_OFFSET ss,SS-\ref*/
CFI_REL_OFFSET rsp,RSP-\ref
@@ -511,7 +527,12 @@
testl $3,CS(%rdi)
je 1f
swapgs
-1: incl %gs:pda_irqcount # RED-PEN should check preempt count
+ /* irqcount is used to check if a CPU is already on an interrupt
+ stack or not. While this is essentially redundant with preempt_count
+ it is a little cheaper to use a separate counter in the PDA
+ (short of moving irq_enter into assembly, which would be too
+ much work) */
+1: incl %gs:pda_irqcount
cmoveq %gs:pda_irqstackptr,%rsp
push %rbp # backlink for old unwinder
/*
@@ -619,8 +640,7 @@
#ifdef CONFIG_PREEMPT
/* Returning to kernel space. Check if we need preemption */
/* rcx: threadinfo. interrupts off. */
- .p2align
-retint_kernel:
+ENTRY(retint_kernel)
cmpl $0,threadinfo_preempt_count(%rcx)
jnz retint_restore_args
bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
@@ -679,7 +699,6 @@
END(call_function_interrupt)
#endif
-#ifdef CONFIG_X86_LOCAL_APIC
ENTRY(apic_timer_interrupt)
apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
END(apic_timer_interrupt)
@@ -691,7 +710,6 @@
ENTRY(spurious_interrupt)
apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
END(spurious_interrupt)
-#endif
/*
* Exception entry points.
@@ -768,7 +786,9 @@
testl $3,CS(%rsp)
jnz paranoid_userspace\trace
paranoid_swapgs\trace:
+ .if \trace
TRACE_IRQS_IRETQ 0
+ .endif
swapgs
paranoid_restore\trace:
RESTORE_ALL 8
@@ -814,7 +834,7 @@
* Exception entry point. This expects an error code/orig_rax on the stack
* and the exception handler in %rax.
*/
-ENTRY(error_entry)
+KPROBE_ENTRY(error_entry)
_frame RDI
/* rdi slot contains rax, oldrax contains error code */
cld
@@ -898,7 +918,7 @@
cmpq $gs_change,RIP(%rsp)
je error_swapgs
jmp error_sti
-END(error_entry)
+KPROBE_END(error_entry)
/* Reload gs selector with exception handling */
/* edi: new selector */
@@ -1020,8 +1040,7 @@
KPROBE_ENTRY(page_fault)
errorentry do_page_fault
-END(page_fault)
- .previous .text
+KPROBE_END(page_fault)
ENTRY(coprocessor_error)
zeroentry do_coprocessor_error
@@ -1042,8 +1061,7 @@
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_debug, DEBUG_STACK
paranoidexit
-END(debug)
- .previous .text
+KPROBE_END(debug)
/* runs on exception stack */
KPROBE_ENTRY(nmi)
@@ -1057,8 +1075,7 @@
jmp paranoid_exit1
CFI_ENDPROC
#endif
-END(nmi)
- .previous .text
+KPROBE_END(nmi)
KPROBE_ENTRY(int3)
INTR_FRAME
@@ -1067,8 +1084,7 @@
paranoidentry do_int3, DEBUG_STACK
jmp paranoid_exit1
CFI_ENDPROC
-END(int3)
- .previous .text
+KPROBE_END(int3)
ENTRY(overflow)
zeroentry do_overflow
@@ -1116,8 +1132,7 @@
KPROBE_ENTRY(general_protection)
errorentry do_general_protection
-END(general_protection)
- .previous .text
+KPROBE_END(general_protection)
ENTRY(alignment_check)
errorentry do_alignment_check
diff --git a/arch/x86_64/kernel/genapic_cluster.c b/arch/x86_64/kernel/genapic_cluster.c
index 3020917..cdb90e6 100644
--- a/arch/x86_64/kernel/genapic_cluster.c
+++ b/arch/x86_64/kernel/genapic_cluster.c
@@ -118,7 +118,6 @@
.name = "clustered",
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
- .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED,
.target_cpus = cluster_target_cpus,
.apic_id_registered = cluster_apic_id_registered,
.init_apic_ldr = cluster_init_apic_ldr,
diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c
index eb86d37..50ad153 100644
--- a/arch/x86_64/kernel/genapic_flat.c
+++ b/arch/x86_64/kernel/genapic_flat.c
@@ -49,8 +49,7 @@
unsigned long cfg;
unsigned long flags;
- local_save_flags(flags);
- local_irq_disable();
+ local_irq_save(flags);
/*
* Wait for idle.
@@ -121,7 +120,6 @@
.name = "flat",
.int_delivery_mode = dest_LowestPrio,
.int_dest_mode = (APIC_DEST_LOGICAL != 0),
- .int_delivery_dest = APIC_DEST_LOGICAL | APIC_DM_LOWEST,
.target_cpus = flat_target_cpus,
.apic_id_registered = flat_apic_id_registered,
.init_apic_ldr = flat_init_apic_ldr,
@@ -180,7 +178,6 @@
.name = "physical flat",
.int_delivery_mode = dest_Fixed,
.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
- .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED,
.target_cpus = physflat_target_cpus,
.apic_id_registered = flat_apic_id_registered,
.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index c9739ca..1e6f808 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -5,8 +5,6 @@
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
* Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
* Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
- *
- * $Id: head.S,v 1.49 2002/03/19 17:39:25 ak Exp $
*/
@@ -187,12 +185,15 @@
/* Finally jump to run C code and to be on real kernel address
* Since we are running on identity-mapped space we have to jump
- * to the full 64bit address , this is only possible as indirect
- * jump
+ * to the full 64bit address, this is only possible as indirect
+ * jump. In addition we need to ensure %cs is set so we make this
+ * a far return.
*/
movq initial_code(%rip),%rax
- pushq $0 # fake return address
- jmp *%rax
+ pushq $0 # fake return address to stop unwinder
+ pushq $__KERNEL_CS # set correct cs
+ pushq %rax # target address in negative space
+ lretq
/* SMP bootup changes these two */
.align 8
@@ -371,7 +372,7 @@
.quad 0,0 /* TSS */
.quad 0,0 /* LDT */
.quad 0,0,0 /* three TLS descriptors */
- .quad 0 /* unused */
+ .quad 0x0000f40000000000 /* node/CPU stored in limit */
gdt_end:
/* asm/segment.h:GDT_ENTRIES must match this */
/* This should be a multiple of the cache line size */
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c
index 36647ce..9561eb3 100644
--- a/arch/x86_64/kernel/head64.c
+++ b/arch/x86_64/kernel/head64.c
@@ -45,38 +45,16 @@
new_data = *(int *) (x86_boot_params + NEW_CL_POINTER);
if (!new_data) {
if (OLD_CL_MAGIC != * (u16 *) OLD_CL_MAGIC_ADDR) {
- printk("so old bootloader that it does not support commandline?!\n");
return;
}
new_data = OLD_CL_BASE_ADDR + * (u16 *) OLD_CL_OFFSET;
- printk("old bootloader convention, maybe loadlin?\n");
}
command_line = (char *) ((u64)(new_data));
memcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
- printk("Bootdata ok (command line is %s)\n", saved_command_line);
-}
-
-static void __init setup_boot_cpu_data(void)
-{
- unsigned int dummy, eax;
-
- /* get vendor info */
- cpuid(0, (unsigned int *)&boot_cpu_data.cpuid_level,
- (unsigned int *)&boot_cpu_data.x86_vendor_id[0],
- (unsigned int *)&boot_cpu_data.x86_vendor_id[8],
- (unsigned int *)&boot_cpu_data.x86_vendor_id[4]);
-
- /* get cpu type */
- cpuid(1, &eax, &dummy, &dummy,
- (unsigned int *) &boot_cpu_data.x86_capability);
- boot_cpu_data.x86 = (eax >> 8) & 0xf;
- boot_cpu_data.x86_model = (eax >> 4) & 0xf;
- boot_cpu_data.x86_mask = eax & 0xf;
}
void __init x86_64_start_kernel(char * real_mode_data)
{
- char *s;
int i;
for (i = 0; i < 256; i++)
@@ -84,10 +62,7 @@
asm volatile("lidt %0" :: "m" (idt_descr));
clear_bss();
- /*
- * This must be called really, really early:
- */
- lockdep_init();
+ early_printk("Kernel alive\n");
/*
* switch to init_level4_pgt from boot_level4_pgt
@@ -103,22 +78,5 @@
#ifdef CONFIG_SMP
cpu_set(0, cpu_online_map);
#endif
- s = strstr(saved_command_line, "earlyprintk=");
- if (s != NULL)
- setup_early_printk(strchr(s, '=') + 1);
-#ifdef CONFIG_NUMA
- s = strstr(saved_command_line, "numa=");
- if (s != NULL)
- numa_setup(s+5);
-#endif
-#ifdef CONFIG_X86_IO_APIC
- if (strstr(saved_command_line, "disableapic"))
- disable_apic = 1;
-#endif
- /* You need early console to see that */
- if (__pa_symbol(&_end) >= KERNEL_TEXT_SIZE)
- panic("Kernel too big for kernel mapping\n");
-
- setup_boot_cpu_data();
start_kernel();
}
diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c
index 0434b1f..2dd51f3 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86_64/kernel/i8259.c
@@ -55,7 +55,6 @@
*/
BUILD_16_IRQS(0x0)
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* The IO-APIC gives us many more interrupt sources. Most of these
* are unused but an SMP system is supposed to have enough memory ...
@@ -75,8 +74,6 @@
BUILD_15_IRQS(0xe)
#endif
-#endif
-
#undef BUILD_16_IRQS
#undef BUILD_15_IRQS
#undef BI
@@ -100,7 +97,6 @@
void (*interrupt[NR_IRQS])(void) = {
IRQLIST_16(0x0),
-#ifdef CONFIG_X86_IO_APIC
IRQLIST_16(0x1), IRQLIST_16(0x2), IRQLIST_16(0x3),
IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
@@ -110,7 +106,6 @@
, IRQLIST_15(0xe)
#endif
-#endif
};
#undef IRQ
@@ -128,6 +123,8 @@
DEFINE_SPINLOCK(i8259A_lock);
+static int i8259A_auto_eoi;
+
static void end_8259A_irq (unsigned int irq)
{
if (irq > 256) {
@@ -341,6 +338,8 @@
{
unsigned long flags;
+ i8259A_auto_eoi = auto_eoi;
+
spin_lock_irqsave(&i8259A_lock, flags);
outb(0xff, 0x21); /* mask all of 8259A-1 */
@@ -399,7 +398,7 @@
static int i8259A_resume(struct sys_device *dev)
{
- init_8259A(0);
+ init_8259A(i8259A_auto_eoi);
restore_ELCR(irq_trigger);
return 0;
}
@@ -453,9 +452,7 @@
{
int i;
-#ifdef CONFIG_X86_LOCAL_APIC
init_bsp_APIC();
-#endif
init_8259A(0);
for (i = 0; i < NR_IRQS; i++) {
@@ -581,14 +578,12 @@
set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-#ifdef CONFIG_X86_LOCAL_APIC
/* self generated IPI for local APIC timer */
set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI vectors for APIC spurious and error interrupts */
set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-#endif
/*
* Set the clock to HZ Hz, we already have a valid
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 924a4a3..0491019 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -48,7 +48,7 @@
static int no_timer_check;
-int disable_timer_pin_1 __initdata;
+static int disable_timer_pin_1 __initdata;
int timer_over_8254 __initdata = 0;
@@ -111,6 +111,33 @@
FINAL; \
}
+union entry_union {
+ struct { u32 w1, w2; };
+ struct IO_APIC_route_entry entry;
+};
+
+static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
+{
+ union entry_union eu;
+ unsigned long flags;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
+ eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ return eu.entry;
+}
+
+static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+ unsigned long flags;
+ union entry_union eu;
+ eu.entry = e;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+ io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
#ifdef CONFIG_SMP
static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
{
@@ -196,13 +223,9 @@
static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
{
struct IO_APIC_route_entry entry;
- unsigned long flags;
/* Check delivery_mode to be sure we're not clearing an SMI pin */
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry = ioapic_read_entry(apic, pin);
if (entry.delivery_mode == dest_SMI)
return;
/*
@@ -210,10 +233,7 @@
*/
memset(&entry, 0, sizeof(entry));
entry.mask = 1;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry);
}
static void clear_IO_APIC (void)
@@ -225,14 +245,6 @@
clear_IO_APIC_pin(apic, pin);
}
-/*
- * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
- * specific CPU-side IRQs.
- */
-
-#define MAX_PIRQS 8
-static int pirq_entries [MAX_PIRQS];
-static int pirqs_enabled;
int skip_ioapic_setup;
int ioapic_force;
@@ -241,18 +253,17 @@
static int __init disable_ioapic_setup(char *str)
{
skip_ioapic_setup = 1;
- return 1;
+ return 0;
}
+early_param("noapic", disable_ioapic_setup);
-static int __init enable_ioapic_setup(char *str)
+/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
+static int __init disable_timer_pin_setup(char *arg)
{
- ioapic_force = 1;
- skip_ioapic_setup = 0;
+ disable_timer_pin_1 = 1;
return 1;
}
-
-__setup("noapic", disable_ioapic_setup);
-__setup("apic", enable_ioapic_setup);
+__setup("disable_timer_pin_1", disable_timer_pin_setup);
static int __init setup_disable_8254_timer(char *s)
{
@@ -268,135 +279,6 @@
__setup("disable_8254_timer", setup_disable_8254_timer);
__setup("enable_8254_timer", setup_enable_8254_timer);
-#include <asm/pci-direct.h>
-#include <linux/pci_ids.h>
-#include <linux/pci.h>
-
-
-#ifdef CONFIG_ACPI
-
-static int nvidia_hpet_detected __initdata;
-
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
-{
- nvidia_hpet_detected = 1;
- return 0;
-}
-#endif
-
-/* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC
- off. Check for an Nvidia or VIA PCI bridge and turn it off.
- Use pci direct infrastructure because this runs before the PCI subsystem.
-
- Can be overwritten with "apic"
-
- And another hack to disable the IOMMU on VIA chipsets.
-
- ... and others. Really should move this somewhere else.
-
- Kludge-O-Rama. */
-void __init check_ioapic(void)
-{
- int num,slot,func;
- /* Poor man's PCI discovery */
- for (num = 0; num < 32; num++) {
- for (slot = 0; slot < 32; slot++) {
- for (func = 0; func < 8; func++) {
- u32 class;
- u32 vendor;
- u8 type;
- class = read_pci_config(num,slot,func,
- PCI_CLASS_REVISION);
- if (class == 0xffffffff)
- break;
-
- if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
- continue;
-
- vendor = read_pci_config(num, slot, func,
- PCI_VENDOR_ID);
- vendor &= 0xffff;
- switch (vendor) {
- case PCI_VENDOR_ID_VIA:
-#ifdef CONFIG_IOMMU
- if ((end_pfn > MAX_DMA32_PFN ||
- force_iommu) &&
- !iommu_aperture_allowed) {
- printk(KERN_INFO
- "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n");
- iommu_aperture_disabled = 1;
- }
-#endif
- return;
- case PCI_VENDOR_ID_NVIDIA:
-#ifdef CONFIG_ACPI
- /*
- * All timer overrides on Nvidia are
- * wrong unless HPET is enabled.
- */
- nvidia_hpet_detected = 0;
- acpi_table_parse(ACPI_HPET,
- nvidia_hpet_check);
- if (nvidia_hpet_detected == 0) {
- acpi_skip_timer_override = 1;
- printk(KERN_INFO "Nvidia board "
- "detected. Ignoring ACPI "
- "timer override.\n");
- }
-#endif
- /* RED-PEN skip them on mptables too? */
- return;
-
- /* This should be actually default, but
- for 2.6.16 let's do it for ATI only where
- it's really needed. */
- case PCI_VENDOR_ID_ATI:
- if (timer_over_8254 == 1) {
- timer_over_8254 = 0;
- printk(KERN_INFO
- "ATI board detected. Disabling timer routing over 8254.\n");
- }
- return;
- }
-
-
- /* No multi-function device? */
- type = read_pci_config_byte(num,slot,func,
- PCI_HEADER_TYPE);
- if (!(type & 0x80))
- break;
- }
- }
- }
-}
-
-static int __init ioapic_pirq_setup(char *str)
-{
- int i, max;
- int ints[MAX_PIRQS+1];
-
- get_options(str, ARRAY_SIZE(ints), ints);
-
- for (i = 0; i < MAX_PIRQS; i++)
- pirq_entries[i] = -1;
-
- pirqs_enabled = 1;
- apic_printk(APIC_VERBOSE, "PIRQ redirection, working around broken MP-BIOS.\n");
- max = MAX_PIRQS;
- if (ints[0] < MAX_PIRQS)
- max = ints[0];
-
- for (i = 0; i < max; i++) {
- apic_printk(APIC_VERBOSE, "... PIRQ%d -> IRQ %d\n", i, ints[i+1]);
- /*
- * PIRQs are mapped upside down, usually.
- */
- pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
- }
- return 1;
-}
-
-__setup("pirq=", ioapic_pirq_setup);
/*
* Find the IRQ entry number of a certain pin.
@@ -425,9 +307,7 @@
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].mpc_srcbus;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA) &&
+ if (test_bit(lbus, mp_bus_not_pci) &&
(mp_irqs[i].mpc_irqtype == type) &&
(mp_irqs[i].mpc_srcbusirq == irq))
@@ -443,9 +323,7 @@
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].mpc_srcbus;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA) &&
+ if (test_bit(lbus, mp_bus_not_pci) &&
(mp_irqs[i].mpc_irqtype == type) &&
(mp_irqs[i].mpc_srcbusirq == irq))
break;
@@ -485,7 +363,7 @@
mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
break;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
+ if (!test_bit(lbus, mp_bus_not_pci) &&
!mp_irqs[i].mpc_irqtype &&
(bus == lbus) &&
(slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
@@ -508,27 +386,6 @@
return best_guess;
}
-/*
- * EISA Edge/Level control register, ELCR
- */
-static int EISA_ELCR(unsigned int irq)
-{
- if (irq < 16) {
- unsigned int port = 0x4d0 + (irq >> 3);
- return (inb(port) >> (irq & 7)) & 1;
- }
- apic_printk(APIC_VERBOSE, "Broken MPtable reports ISA irq %d\n", irq);
- return 0;
-}
-
-/* EISA interrupts are always polarity zero and can be edge or level
- * trigger depending on the ELCR value. If an interrupt is listed as
- * EISA conforming in the MP table, that means its trigger type must
- * be read in from the ELCR */
-
-#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
-#define default_EISA_polarity(idx) (0)
-
/* ISA interrupts are always polarity zero edge triggered,
* when listed as conforming in the MP table. */
@@ -541,12 +398,6 @@
#define default_PCI_trigger(idx) (1)
#define default_PCI_polarity(idx) (1)
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx) (1)
-#define default_MCA_polarity(idx) (0)
-
static int __init MPBIOS_polarity(int idx)
{
int bus = mp_irqs[idx].mpc_srcbus;
@@ -558,38 +409,11 @@
switch (mp_irqs[idx].mpc_irqflag & 3)
{
case 0: /* conforms, ie. bus-type dependent polarity */
- {
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- {
- polarity = default_ISA_polarity(idx);
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- polarity = default_EISA_polarity(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- polarity = default_PCI_polarity(idx);
- break;
- }
- case MP_BUS_MCA: /* MCA pin */
- {
- polarity = default_MCA_polarity(idx);
- break;
- }
- default:
- {
- printk(KERN_WARNING "broken BIOS!!\n");
- polarity = 1;
- break;
- }
- }
+ if (test_bit(bus, mp_bus_not_pci))
+ polarity = default_ISA_polarity(idx);
+ else
+ polarity = default_PCI_polarity(idx);
break;
- }
case 1: /* high active */
{
polarity = 0;
@@ -627,38 +451,11 @@
switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
{
case 0: /* conforms, ie. bus-type dependent */
- {
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- {
- trigger = default_ISA_trigger(idx);
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- trigger = default_EISA_trigger(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- trigger = default_PCI_trigger(idx);
- break;
- }
- case MP_BUS_MCA: /* MCA pin */
- {
- trigger = default_MCA_trigger(idx);
- break;
- }
- default:
- {
- printk(KERN_WARNING "broken BIOS!!\n");
- trigger = 1;
- break;
- }
- }
+ if (test_bit(bus, mp_bus_not_pci))
+ trigger = default_ISA_trigger(idx);
+ else
+ trigger = default_PCI_trigger(idx);
break;
- }
case 1: /* edge */
{
trigger = 0;
@@ -764,49 +561,17 @@
if (mp_irqs[idx].mpc_dstirq != pin)
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- case MP_BUS_EISA:
- case MP_BUS_MCA:
- {
- irq = mp_irqs[idx].mpc_srcbusirq;
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- /*
- * PCI IRQs are mapped in order
- */
- i = irq = 0;
- while (i < apic)
- irq += nr_ioapic_registers[i++];
- irq += pin;
- irq = gsi_irq_sharing(irq);
- break;
- }
- default:
- {
- printk(KERN_ERR "unknown bus type %d.\n",bus);
- irq = 0;
- break;
- }
- }
- BUG_ON(irq >= NR_IRQS);
-
- /*
- * PCI IRQ command line redirection. Yes, limits are hardcoded.
- */
- if ((pin >= 16) && (pin <= 23)) {
- if (pirq_entries[pin-16] != -1) {
- if (!pirq_entries[pin-16]) {
- apic_printk(APIC_VERBOSE, "disabling PIRQ%d\n", pin-16);
- } else {
- irq = pirq_entries[pin-16];
- apic_printk(APIC_VERBOSE, "using PIRQ%d -> IRQ %d\n",
- pin-16, irq);
- }
- }
+ if (test_bit(bus, mp_bus_not_pci)) {
+ irq = mp_irqs[idx].mpc_srcbusirq;
+ } else {
+ /*
+ * PCI IRQs are mapped in order
+ */
+ i = irq = 0;
+ while (i < apic)
+ irq += nr_ioapic_registers[i++];
+ irq += pin;
+ irq = gsi_irq_sharing(irq);
}
BUG_ON(irq >= NR_IRQS);
return irq;
@@ -943,9 +708,9 @@
if (!apic && (irq < 16))
disable_8259A_irq(irq);
}
+ ioapic_write_entry(apic, pin, entry);
+
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
set_native_irq_info(irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
@@ -1083,10 +848,7 @@
for (i = 0; i <= reg_01.bits.entries; i++) {
struct IO_APIC_route_entry entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2);
- *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry = ioapic_read_entry(apic, i);
printk(KERN_DEBUG " %02x %03X %02X ",
i,
@@ -1281,9 +1043,6 @@
irq_2_pin[i].pin = -1;
irq_2_pin[i].next = 0;
}
- if (!pirqs_enabled)
- for (i = 0; i < MAX_PIRQS; i++)
- pirq_entries[i] = -1;
/*
* The number of IO-APIC IRQ registers (== #pins):
@@ -1299,11 +1058,7 @@
/* See if any of the pins is in ExtINT mode */
for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
struct IO_APIC_route_entry entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
+ entry = ioapic_read_entry(apic, pin);
/* If the interrupt line is enabled and in ExtInt mode
* I have found the pin where the i8259 is connected.
@@ -1355,7 +1110,6 @@
*/
if (ioapic_i8259.pin != -1) {
struct IO_APIC_route_entry entry;
- unsigned long flags;
memset(&entry, 0, sizeof(entry));
entry.mask = 0; /* Enabled */
@@ -1372,84 +1126,13 @@
/*
* Add it to the IO-APIC irq-routing table:
*/
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
- *(((int *)&entry)+1));
- io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
- *(((int *)&entry)+0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
}
disconnect_bsp_APIC(ioapic_i8259.pin != -1);
}
/*
- * function to set the IO-APIC physical IDs based on the
- * values stored in the MPC table.
- *
- * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
- */
-
-static void __init setup_ioapic_ids_from_mpc (void)
-{
- union IO_APIC_reg_00 reg_00;
- int apic;
- int i;
- unsigned char old_id;
- unsigned long flags;
-
- /*
- * Set the IOAPIC ID to the value stored in the MPC table.
- */
- for (apic = 0; apic < nr_ioapics; apic++) {
-
- /* Read the register 0 value */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- old_id = mp_ioapics[apic].mpc_apicid;
-
-
- printk(KERN_INFO "Using IO-APIC %d\n", mp_ioapics[apic].mpc_apicid);
-
-
- /*
- * We need to adjust the IRQ routing table
- * if the ID changed.
- */
- if (old_id != mp_ioapics[apic].mpc_apicid)
- for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_dstapic == old_id)
- mp_irqs[i].mpc_dstapic
- = mp_ioapics[apic].mpc_apicid;
-
- /*
- * Read the right value from the MPC table and
- * write it into the ID register.
- */
- apic_printk(APIC_VERBOSE,KERN_INFO "...changing IO-APIC physical APIC ID to %d ...",
- mp_ioapics[apic].mpc_apicid);
-
- reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0, reg_00.raw);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- /*
- * Sanity check
- */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
- if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
- printk("could not set ID!\n");
- else
- apic_printk(APIC_VERBOSE," ok.\n");
- }
-}
-
-/*
* There is a nasty bug in some older SMP boards, their mptable lies
* about the timer IRQ. We do the following to work around the situation:
*
@@ -1964,11 +1647,6 @@
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
- /*
- * Set up the IO-APIC IRQ routing table.
- */
- if (!acpi_ioapic)
- setup_ioapic_ids_from_mpc();
sync_Arb_IDs();
setup_IO_APIC_irqs();
init_IO_APIC_traps();
@@ -1987,17 +1665,12 @@
{
struct IO_APIC_route_entry *entry;
struct sysfs_ioapic_data *data;
- unsigned long flags;
int i;
data = container_of(dev, struct sysfs_ioapic_data, dev);
entry = data->entry;
- spin_lock_irqsave(&ioapic_lock, flags);
- for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
- *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i);
- *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i);
- }
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
+ *entry = ioapic_read_entry(dev->id, i);
return 0;
}
@@ -2019,11 +1692,9 @@
reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
io_apic_write(dev->id, 0, reg_00.raw);
}
- for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) {
- io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1));
- io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0));
- }
spin_unlock_irqrestore(&ioapic_lock, flags);
+ for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
+ ioapic_write_entry(dev->id, i, entry[i]);
return 0;
}
@@ -2077,19 +1748,6 @@
#define IO_APIC_MAX_ID 0xFE
-int __init io_apic_get_version (int ioapic)
-{
- union IO_APIC_reg_01 reg_01;
- unsigned long flags;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_01.raw = io_apic_read(ioapic, 1);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- return reg_01.bits.version;
-}
-
-
int __init io_apic_get_redir_entries (int ioapic)
{
union IO_APIC_reg_01 reg_01;
@@ -2148,10 +1806,10 @@
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
+ ioapic_write_entry(ioapic, pin, entry);
+
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
- set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
+ set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
return 0;
diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86_64/kernel/ioport.c
index b816149..fe063d3 100644
--- a/arch/x86_64/kernel/ioport.c
+++ b/arch/x86_64/kernel/ioport.c
@@ -56,6 +56,7 @@
memset(bitmap, 0xff, IO_BITMAP_BYTES);
t->io_bitmap_ptr = bitmap;
+ set_thread_flag(TIF_IO_BITMAP);
}
/*
diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c
index 5221a53..b3677e6 100644
--- a/arch/x86_64/kernel/irq.c
+++ b/arch/x86_64/kernel/irq.c
@@ -20,11 +20,6 @@
#include <asm/idle.h>
atomic_t irq_err_count;
-#ifdef CONFIG_X86_IO_APIC
-#ifdef APIC_MISMATCH_DEBUG
-atomic_t irq_mis_count;
-#endif
-#endif
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/*
@@ -92,18 +87,11 @@
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count);
seq_putc(p, '\n');
-#ifdef CONFIG_X86_LOCAL_APIC
seq_printf(p, "LOC: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs);
seq_putc(p, '\n');
-#endif
seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-#ifdef CONFIG_X86_IO_APIC
-#ifdef APIC_MISMATCH_DEBUG
- seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
-#endif
-#endif
}
return 0;
}
diff --git a/arch/x86_64/kernel/machine_kexec.c b/arch/x86_64/kernel/machine_kexec.c
index 106076b..0497e3b 100644
--- a/arch/x86_64/kernel/machine_kexec.c
+++ b/arch/x86_64/kernel/machine_kexec.c
@@ -15,6 +15,15 @@
#include <asm/mmu_context.h>
#include <asm/io.h>
+#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
+static u64 kexec_pgd[512] PAGE_ALIGNED;
+static u64 kexec_pud0[512] PAGE_ALIGNED;
+static u64 kexec_pmd0[512] PAGE_ALIGNED;
+static u64 kexec_pte0[512] PAGE_ALIGNED;
+static u64 kexec_pud1[512] PAGE_ALIGNED;
+static u64 kexec_pmd1[512] PAGE_ALIGNED;
+static u64 kexec_pte1[512] PAGE_ALIGNED;
+
static void init_level2_page(pmd_t *level2p, unsigned long addr)
{
unsigned long end_addr;
@@ -144,32 +153,19 @@
);
}
-typedef NORET_TYPE void (*relocate_new_kernel_t)(unsigned long indirection_page,
- unsigned long control_code_buffer,
- unsigned long start_address,
- unsigned long pgtable) ATTRIB_NORET;
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned long relocate_new_kernel_size;
-
int machine_kexec_prepare(struct kimage *image)
{
- unsigned long start_pgtable, control_code_buffer;
+ unsigned long start_pgtable;
int result;
/* Calculate the offsets */
start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
- control_code_buffer = start_pgtable + PAGE_SIZE;
/* Setup the identity mapped 64bit page table */
result = init_pgtable(image, start_pgtable);
if (result)
return result;
- /* Place the code in the reboot code buffer */
- memcpy(__va(control_code_buffer), relocate_new_kernel,
- relocate_new_kernel_size);
-
return 0;
}
@@ -184,28 +180,34 @@
*/
NORET_TYPE void machine_kexec(struct kimage *image)
{
- unsigned long page_list;
- unsigned long control_code_buffer;
- unsigned long start_pgtable;
- relocate_new_kernel_t rnk;
+ unsigned long page_list[PAGES_NR];
+ void *control_page;
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
- /* Calculate the offsets */
- page_list = image->head;
- start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
- control_code_buffer = start_pgtable + PAGE_SIZE;
+ control_page = page_address(image->control_code_page) + PAGE_SIZE;
+ memcpy(control_page, relocate_kernel, PAGE_SIZE);
- /* Set the low half of the page table to my identity mapped
- * page table for kexec. Leave the high half pointing at the
- * kernel pages. Don't bother to flush the global pages
- * as that will happen when I fully switch to my identity mapped
- * page table anyway.
- */
- memcpy(__va(read_cr3()), __va(start_pgtable), PAGE_SIZE/2);
- __flush_tlb();
+ page_list[PA_CONTROL_PAGE] = __pa(control_page);
+ page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+ page_list[PA_PGD] = __pa(kexec_pgd);
+ page_list[VA_PGD] = (unsigned long)kexec_pgd;
+ page_list[PA_PUD_0] = __pa(kexec_pud0);
+ page_list[VA_PUD_0] = (unsigned long)kexec_pud0;
+ page_list[PA_PMD_0] = __pa(kexec_pmd0);
+ page_list[VA_PMD_0] = (unsigned long)kexec_pmd0;
+ page_list[PA_PTE_0] = __pa(kexec_pte0);
+ page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
+ page_list[PA_PUD_1] = __pa(kexec_pud1);
+ page_list[VA_PUD_1] = (unsigned long)kexec_pud1;
+ page_list[PA_PMD_1] = __pa(kexec_pmd1);
+ page_list[VA_PMD_1] = (unsigned long)kexec_pmd1;
+ page_list[PA_PTE_1] = __pa(kexec_pte1);
+ page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
+ page_list[PA_TABLE_PAGE] =
+ (unsigned long)__pa(page_address(image->control_code_page));
/* The segment registers are funny things, they have both a
* visible and an invisible part. Whenever the visible part is
@@ -222,7 +224,36 @@
*/
set_gdt(phys_to_virt(0),0);
set_idt(phys_to_virt(0),0);
+
/* now call it */
- rnk = (relocate_new_kernel_t) control_code_buffer;
- (*rnk)(page_list, control_code_buffer, image->start, start_pgtable);
+ relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
+ image->start);
}
+
+/* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never set's it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+static int __init setup_crashkernel(char *arg)
+{
+ unsigned long size, base;
+ char *p;
+ if (!arg)
+ return -EINVAL;
+ size = memparse(arg, &p);
+ if (arg == p)
+ return -EINVAL;
+ if (*p == '@') {
+ base = memparse(p+1, &p);
+ /* FIXME: Do I want a sanity check to validate the
+ * memory range? Yes you do, but it's too early for
+ * e820 -AK */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ return 0;
+}
+early_param("crashkernel", setup_crashkernel);
+
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 4e017fb..bbea888 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -182,7 +182,7 @@
goto out2;
memset(&m, 0, sizeof(struct mce));
- m.cpu = safe_smp_processor_id();
+ m.cpu = smp_processor_id();
rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
if (!(m.mcgstatus & MCG_STATUS_RIPV))
kill_it = 1;
@@ -274,6 +274,33 @@
atomic_dec(&mce_entry);
}
+#ifdef CONFIG_X86_MCE_INTEL
+/***
+ * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
+ * @cpu: The CPU on which the event occured.
+ * @status: Event status information
+ *
+ * This function should be called by the thermal interrupt after the
+ * event has been processed and the decision was made to log the event
+ * further.
+ *
+ * The status parameter will be saved to the 'status' field of 'struct mce'
+ * and historically has been the register value of the
+ * MSR_IA32_THERMAL_STATUS (Intel) msr.
+ */
+void mce_log_therm_throt_event(unsigned int cpu, __u64 status)
+{
+ struct mce m;
+
+ memset(&m, 0, sizeof(m));
+ m.cpu = cpu;
+ m.bank = MCE_THERMAL_BANK;
+ m.status = status;
+ rdtscll(m.tsc);
+ mce_log(&m);
+}
+#endif /* CONFIG_X86_MCE_INTEL */
+
/*
* Periodic polling timer for "silent" machine check errors.
*/
diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86_64/kernel/mce_intel.c
index 8f533d2..6551505 100644
--- a/arch/x86_64/kernel/mce_intel.c
+++ b/arch/x86_64/kernel/mce_intel.c
@@ -11,36 +11,21 @@
#include <asm/mce.h>
#include <asm/hw_irq.h>
#include <asm/idle.h>
-
-static DEFINE_PER_CPU(unsigned long, next_check);
+#include <asm/therm_throt.h>
asmlinkage void smp_thermal_interrupt(void)
{
- struct mce m;
+ __u64 msr_val;
ack_APIC_irq();
exit_idle();
irq_enter();
- if (time_before(jiffies, __get_cpu_var(next_check)))
- goto done;
- __get_cpu_var(next_check) = jiffies + HZ*300;
- memset(&m, 0, sizeof(m));
- m.cpu = smp_processor_id();
- m.bank = MCE_THERMAL_BANK;
- rdtscll(m.tsc);
- rdmsrl(MSR_IA32_THERM_STATUS, m.status);
- if (m.status & 0x1) {
- printk(KERN_EMERG
- "CPU%d: Temperature above threshold, cpu clock throttled\n", m.cpu);
- add_taint(TAINT_MACHINE_CHECK);
- } else {
- printk(KERN_EMERG "CPU%d: Temperature/speed normal\n", m.cpu);
- }
+ rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
+ if (therm_throt_process(msr_val & 1))
+ mce_log_therm_throt_event(smp_processor_id(), msr_val);
- mce_log(&m);
-done:
irq_exit();
}
@@ -92,6 +77,9 @@
apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
cpu, tm2 ? "TM2" : "TM1");
+
+ /* enable thermal throttle processing */
+ atomic_set(&therm_throt_en, 1);
return;
}
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index a1ab419..20e88f4 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -41,8 +41,7 @@
* Various Linux-internal data structures created from the
* MP-table.
*/
-unsigned char apic_version [MAX_APICS];
-unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
static int mp_current_pci_id = 0;
@@ -56,7 +55,6 @@
int mp_irq_entries;
int nr_ioapics;
-int pic_mode;
unsigned long mp_lapic_addr = 0;
@@ -71,19 +69,6 @@
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
-/* ACPI MADT entry parsing functions */
-#ifdef CONFIG_ACPI
-extern struct acpi_boot_flags acpi_boot;
-#ifdef CONFIG_X86_LOCAL_APIC
-extern int acpi_parse_lapic (acpi_table_entry_header *header);
-extern int acpi_parse_lapic_addr_ovr (acpi_table_entry_header *header);
-extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header);
-#endif /*CONFIG_X86_LOCAL_APIC*/
-#ifdef CONFIG_X86_IO_APIC
-extern int acpi_parse_ioapic (acpi_table_entry_header *header);
-#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI*/
-
u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
@@ -108,24 +93,20 @@
static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
{
int cpu;
- unsigned char ver;
cpumask_t tmp_map;
+ char *bootup_cpu = "";
if (!(m->mpc_cpuflag & CPU_ENABLED)) {
disabled_cpus++;
return;
}
-
- printk(KERN_INFO "Processor #%d %d:%d APIC version %d\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK)>>8,
- (m->mpc_cpufeature & CPU_MODEL_MASK)>>4,
- m->mpc_apicver);
-
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- Dprintk(" Bootup CPU\n");
+ bootup_cpu = " (Bootup-CPU)";
boot_cpu_id = m->mpc_apicid;
}
+
+ printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
+
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
" Processor ignored.\n", NR_CPUS);
@@ -136,24 +117,7 @@
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
-#if MAX_APICS < 255
- if ((int)m->mpc_apicid > MAX_APICS) {
- printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->mpc_apicid, MAX_APICS);
- return;
- }
-#endif
- ver = m->mpc_apicver;
-
physid_set(m->mpc_apicid, phys_cpu_present_map);
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid);
- ver = 0x10;
- }
- apic_version[m->mpc_apicid] = ver;
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
/*
* bios_cpu_apicid is required to have processors listed
@@ -178,15 +142,11 @@
Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
if (strncmp(str, "ISA", 3) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
- } else if (strncmp(str, "EISA", 4) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
+ set_bit(m->mpc_busid, mp_bus_not_pci);
} else if (strncmp(str, "PCI", 3) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+ clear_bit(m->mpc_busid, mp_bus_not_pci);
mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
mp_current_pci_id++;
- } else if (strncmp(str, "MCA", 3) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
} else {
printk(KERN_ERR "Unknown bustype %s\n", str);
}
@@ -197,8 +157,8 @@
if (!(m->mpc_flags & MPC_APIC_USABLE))
return;
- printk("I/O APIC #%d Version %d at 0x%X.\n",
- m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
+ printk("I/O APIC #%d at 0x%X.\n",
+ m->mpc_apicid, m->mpc_apicaddr);
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "Max # of I/O APICs (%d) exceeded (found %d).\n",
MAX_IO_APICS, nr_ioapics);
@@ -232,19 +192,6 @@
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
- /*
- * Well it seems all SMP boards in existence
- * use ExtINT/LVT1 == LINT0 and
- * NMI/LVT2 == LINT1 - the following check
- * will show us if this assumptions is false.
- * Until then we do not have to add baggage.
- */
- if ((m->mpc_irqtype == mp_ExtINT) &&
- (m->mpc_destapiclint != 0))
- BUG();
- if ((m->mpc_irqtype == mp_NMI) &&
- (m->mpc_destapiclint != 1))
- BUG();
}
/*
@@ -258,7 +205,7 @@
unsigned char *mpt=((unsigned char *)mpc)+count;
if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
- printk("SMP mptable: bad signature [%c%c%c%c]!\n",
+ printk("MPTABLE: bad signature [%c%c%c%c]!\n",
mpc->mpc_signature[0],
mpc->mpc_signature[1],
mpc->mpc_signature[2],
@@ -266,31 +213,31 @@
return 0;
}
if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
- printk("SMP mptable: checksum error!\n");
+ printk("MPTABLE: checksum error!\n");
return 0;
}
if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
- printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
+ printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
mpc->mpc_spec);
return 0;
}
if (!mpc->mpc_lapic) {
- printk(KERN_ERR "SMP mptable: null local APIC address!\n");
+ printk(KERN_ERR "MPTABLE: null local APIC address!\n");
return 0;
}
memcpy(str,mpc->mpc_oem,8);
- str[8]=0;
- printk(KERN_INFO "OEM ID: %s ",str);
+ str[8] = 0;
+ printk(KERN_INFO "MPTABLE: OEM ID: %s ",str);
memcpy(str,mpc->mpc_productid,12);
- str[12]=0;
- printk("Product ID: %s ",str);
+ str[12] = 0;
+ printk("MPTABLE: Product ID: %s ",str);
- printk("APIC at: 0x%X\n",mpc->mpc_lapic);
+ printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic);
/* save the local APIC address, it might be non-default */
if (!acpi_lapic)
- mp_lapic_addr = mpc->mpc_lapic;
+ mp_lapic_addr = mpc->mpc_lapic;
/*
* Now process the configuration blocks.
@@ -302,7 +249,7 @@
struct mpc_config_processor *m=
(struct mpc_config_processor *)mpt;
if (!acpi_lapic)
- MP_processor_info(m);
+ MP_processor_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
@@ -321,8 +268,8 @@
struct mpc_config_ioapic *m=
(struct mpc_config_ioapic *)mpt;
MP_ioapic_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
break;
}
case MP_INTSRC:
@@ -331,8 +278,8 @@
(struct mpc_config_intsrc *)mpt;
MP_intsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
break;
}
case MP_LINTSRC:
@@ -340,15 +287,15 @@
struct mpc_config_lintsrc *m=
(struct mpc_config_lintsrc *)mpt;
MP_lintsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
break;
}
}
}
clustered_apic_check();
if (!num_processors)
- printk(KERN_ERR "SMP mptable: no processors registered!\n");
+ printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
}
@@ -444,13 +391,10 @@
* 2 CPUs, numbered 0 & 1.
*/
processor.mpc_type = MP_PROCESSOR;
- /* Either an integrated APIC or a discrete 82489DX. */
- processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ processor.mpc_apicver = 0;
processor.mpc_cpuflag = CPU_ENABLED;
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) |
- boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_cpufeature = 0;
+ processor.mpc_featureflag = 0;
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
for (i = 0; i < 2; i++) {
@@ -469,14 +413,6 @@
case 5:
memcpy(bus.mpc_bustype, "ISA ", 6);
break;
- case 2:
- case 6:
- case 3:
- memcpy(bus.mpc_bustype, "EISA ", 6);
- break;
- case 4:
- case 7:
- memcpy(bus.mpc_bustype, "MCA ", 6);
}
MP_bus_info(&bus);
if (mpc_default_type > 4) {
@@ -487,7 +423,7 @@
ioapic.mpc_type = MP_IOAPIC;
ioapic.mpc_apicid = 2;
- ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ ioapic.mpc_apicver = 0;
ioapic.mpc_flags = MPC_APIC_USABLE;
ioapic.mpc_apicaddr = 0xFEC00000;
MP_ioapic_info(&ioapic);
@@ -530,13 +466,6 @@
printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
- if (mpf->mpf_feature2 & (1<<7)) {
- printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
- pic_mode = 1;
- } else {
- printk(KERN_INFO " Virtual Wire compatibility mode.\n");
- pic_mode = 0;
- }
/*
* Now see if we need to read further.
@@ -616,7 +545,7 @@
return 0;
}
-void __init find_intel_smp (void)
+void __init find_smp_config(void)
{
unsigned int address;
@@ -633,9 +562,7 @@
smp_scan_config(0xF0000,0x10000))
return;
/*
- * If it is an SMP machine we should know now, unless the
- * configuration is in an EISA/MCA bus machine with an
- * extended bios data area.
+ * If it is an SMP machine we should know now.
*
* there is a real-mode segmented pointer pointing to the
* 4K EBDA area at 0x40E, calculate and scan it here.
@@ -656,69 +583,41 @@
printk(KERN_INFO "No mptable found.\n");
}
-/*
- * - Intel MP Configuration Table
- */
-void __init find_smp_config (void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
- find_intel_smp();
-#endif
-}
-
-
/* --------------------------------------------------------------------------
ACPI-based MP Configuration
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI
-void __init mp_register_lapic_address (
- u64 address)
+void __init mp_register_lapic_address(u64 address)
{
mp_lapic_addr = (unsigned long) address;
-
set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-
if (boot_cpu_id == -1U)
boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-
- Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
}
-
-void __cpuinit mp_register_lapic (
- u8 id,
- u8 enabled)
+void __cpuinit mp_register_lapic (u8 id, u8 enabled)
{
struct mpc_config_processor processor;
int boot_cpu = 0;
- if (id >= MAX_APICS) {
- printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
- id, MAX_APICS);
- return;
- }
-
- if (id == boot_cpu_physical_apicid)
+ if (id == boot_cpu_id)
boot_cpu = 1;
processor.mpc_type = MP_PROCESSOR;
processor.mpc_apicid = id;
- processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
+ processor.mpc_apicver = 0;
processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_cpufeature = 0;
+ processor.mpc_featureflag = 0;
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
MP_processor_info(&processor);
}
-#ifdef CONFIG_X86_IO_APIC
-
#define MP_ISA_BUS 0
#define MP_MAX_IOAPIC_PIN 127
@@ -729,11 +628,9 @@
u32 pin_programmed[4];
} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic (
- int gsi)
+static int mp_find_ioapic(int gsi)
{
- int i = 0;
+ int i = 0;
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
@@ -743,17 +640,12 @@
}
printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-
return -1;
}
-
-void __init mp_register_ioapic (
- u8 id,
- u32 address,
- u32 gsi_base)
+void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
{
- int idx = 0;
+ int idx = 0;
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@@ -774,7 +666,7 @@
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
mp_ioapics[idx].mpc_apicid = id;
- mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
+ mp_ioapics[idx].mpc_apicver = 0;
/*
* Build basic IRQ lookup table to facilitate gsi->io_apic lookups
@@ -785,21 +677,15 @@
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
+ mp_ioapics[idx].mpc_apicaddr,
mp_ioapic_routing[idx].gsi_start,
mp_ioapic_routing[idx].gsi_end);
-
- return;
}
-
-void __init mp_override_legacy_irq (
- u8 bus_irq,
- u8 polarity,
- u8 trigger,
- u32 gsi)
+void __init
+mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
struct mpc_config_intsrc intsrc;
int ioapic = -1;
@@ -837,22 +723,18 @@
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
-
- return;
}
-
-void __init mp_config_acpi_legacy_irqs (void)
+void __init mp_config_acpi_legacy_irqs(void)
{
struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
+ int i = 0;
+ int ioapic = -1;
/*
* Fabricate the legacy ISA bus (bus #31).
*/
- mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+ set_bit(MP_ISA_BUS, mp_bus_not_pci);
/*
* Locate the IOAPIC that manages the ISA IRQs (0-15).
@@ -905,24 +787,22 @@
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
}
-
- return;
}
#define MAX_GSI_NUM 4096
int mp_register_gsi(u32 gsi, int triggering, int polarity)
{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
- static int pci_irq = 16;
+ int ioapic = -1;
+ int ioapic_pin = 0;
+ int idx, bit = 0;
+ static int pci_irq = 16;
/*
* Mapping between Global System Interrupts, which
* represent all possible interrupts, to the IRQs
* assigned to actual devices.
*/
- static int gsi_to_irq[MAX_GSI_NUM];
+ static int gsi_to_irq[MAX_GSI_NUM];
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -996,6 +876,4 @@
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
return gsi;
}
-
-#endif /*CONFIG_X86_IO_APIC*/
#endif /*CONFIG_ACPI*/
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 5baa0c7..4d6fb04 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -28,71 +28,138 @@
#include <asm/mce.h>
#include <asm/intel_arch_perfmon.h>
-/*
- * lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
- * - it may be reserved by some other driver, or not
- * - when not reserved by some other driver, it may be used for
- * the NMI watchdog, or not
- *
- * This is maintained separately from nmi_active because the NMI
- * watchdog may also be driven from the I/O APIC timer.
+/* perfctr_nmi_owner tracks the ownership of the perfctr registers:
+ * evtsel_nmi_owner tracks the ownership of the event selection
+ * - different performance counters/ event selection may be reserved for
+ * different subsystems this reservation system just tries to coordinate
+ * things a little
*/
-static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
-static unsigned int lapic_nmi_owner;
-#define LAPIC_NMI_WATCHDOG (1<<0)
-#define LAPIC_NMI_RESERVED (1<<1)
+static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner);
+static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[2]);
+
+/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
+ * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now)
+ */
+#define NMI_MAX_COUNTER_BITS 66
/* nmi_active:
- * +1: the lapic NMI watchdog is active, but can be disabled
- * 0: the lapic NMI watchdog has not been set up, and cannot
+ * >0: the lapic NMI watchdog is active, but can be disabled
+ * <0: the lapic NMI watchdog has not been set up, and cannot
* be enabled
- * -1: the lapic NMI watchdog is disabled, but can be enabled
+ * 0: the lapic NMI watchdog is disabled, but can be enabled
*/
-int nmi_active; /* oprofile uses this */
+atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
int panic_on_timeout;
unsigned int nmi_watchdog = NMI_DEFAULT;
static unsigned int nmi_hz = HZ;
-static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
-static unsigned int nmi_p4_cccr_val;
-/* Note that these events don't tick when the CPU idles. This means
- the frequency varies with CPU load. */
+struct nmi_watchdog_ctlblk {
+ int enabled;
+ u64 check_bit;
+ unsigned int cccr_msr;
+ unsigned int perfctr_msr; /* the MSR to reset in NMI handler */
+ unsigned int evntsel_msr; /* the MSR to select the events to handle */
+};
+static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk);
-#define K7_EVNTSEL_ENABLE (1 << 22)
-#define K7_EVNTSEL_INT (1 << 20)
-#define K7_EVNTSEL_OS (1 << 17)
-#define K7_EVNTSEL_USR (1 << 16)
-#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
-#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
+/* local prototypes */
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
-#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
-#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
+/* converts an msr to an appropriate reservation bit */
+static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
+{
+ /* returns the bit offset of the performance counter register */
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ return (msr - MSR_K7_PERFCTR0);
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ return (msr - MSR_ARCH_PERFMON_PERFCTR0);
+ else
+ return (msr - MSR_P4_BPU_PERFCTR0);
+ }
+ return 0;
+}
-#define MSR_P4_MISC_ENABLE 0x1A0
-#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
-#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
-#define MSR_P4_PERFCTR0 0x300
-#define MSR_P4_CCCR0 0x360
-#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
-#define P4_ESCR_OS (1<<3)
-#define P4_ESCR_USR (1<<2)
-#define P4_CCCR_OVF_PMI0 (1<<26)
-#define P4_CCCR_OVF_PMI1 (1<<27)
-#define P4_CCCR_THRESHOLD(N) ((N)<<20)
-#define P4_CCCR_COMPLEMENT (1<<19)
-#define P4_CCCR_COMPARE (1<<18)
-#define P4_CCCR_REQUIRED (3<<16)
-#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
-#define P4_CCCR_ENABLE (1<<12)
-/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
- CRU_ESCR0 (with any non-null event selector) through a complemented
- max threshold. [IA32-Vol3, Section 14.9.9] */
-#define MSR_P4_IQ_COUNTER0 0x30C
-#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
-#define P4_NMI_IQ_CCCR0 \
- (P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \
- P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
+/* converts an msr to an appropriate reservation bit */
+static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
+{
+ /* returns the bit offset of the event selection register */
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ return (msr - MSR_K7_EVNTSEL0);
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+ return (msr - MSR_ARCH_PERFMON_EVENTSEL0);
+ else
+ return (msr - MSR_P4_BSU_ESCR0);
+ }
+ return 0;
+}
+
+/* checks for a bit availability (hack for oprofile) */
+int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
+{
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+}
+
+/* checks the an msr for availability */
+int avail_to_resrv_perfctr_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_perfctr_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+}
+
+int reserve_perfctr_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_perfctr_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
+ return 1;
+ return 0;
+}
+
+void release_perfctr_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_perfctr_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
+}
+
+int reserve_evntsel_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_evntsel_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)))
+ return 1;
+ return 0;
+}
+
+void release_evntsel_nmi(unsigned int msr)
+{
+ unsigned int counter;
+
+ counter = nmi_evntsel_msr_to_bit(msr);
+ BUG_ON(counter > NMI_MAX_COUNTER_BITS);
+
+ clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner));
+}
static __cpuinit inline int nmi_known_cpu(void)
{
@@ -109,7 +176,7 @@
}
/* Run after command line and cpu_init init, but before all other checks */
-void __cpuinit nmi_watchdog_default(void)
+void nmi_watchdog_default(void)
{
if (nmi_watchdog != NMI_DEFAULT)
return;
@@ -145,6 +212,12 @@
int *counts;
int cpu;
+ if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT))
+ return 0;
+
+ if (!atomic_read(&nmi_active))
+ return 0;
+
counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!counts)
return -1;
@@ -162,26 +235,43 @@
mdelay((10*1000)/nmi_hz); // wait 10 ticks
for_each_online_cpu(cpu) {
+ if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled)
+ continue;
if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
- endflag = 1;
printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
cpu,
counts[cpu],
cpu_pda(cpu)->__nmi_count);
- nmi_active = 0;
- lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
- nmi_perfctr_msr = 0;
- kfree(counts);
- return -1;
+ per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0;
+ atomic_dec(&nmi_active);
}
}
+ if (!atomic_read(&nmi_active)) {
+ kfree(counts);
+ atomic_set(&nmi_active, -1);
+ return -1;
+ }
endflag = 1;
printk("OK.\n");
/* now that we know it works we can reduce NMI frequency to
something more reasonable; makes a difference in some configs */
- if (nmi_watchdog == NMI_LOCAL_APIC)
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
nmi_hz = 1;
+ /*
+ * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter
+ * are writable, with higher bits sign extending from bit 31.
+ * So, we can only program the counter with 31 bit values and
+ * 32nd bit should be 1, for 33.. to be 1.
+ * Find the appropriate nmi_hz
+ */
+ if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 &&
+ ((u64)cpu_khz * 1000) > 0x7fffffffULL) {
+ nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1;
+ }
+ }
kfree(counts);
return 0;
@@ -201,91 +291,65 @@
get_option(&str, &nmi);
- if (nmi >= NMI_INVALID)
+ if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
return 0;
+
+ if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0))
+ return 0; /* no lapic support */
nmi_watchdog = nmi;
return 1;
}
__setup("nmi_watchdog=", setup_nmi_watchdog);
-static void disable_intel_arch_watchdog(void);
-
static void disable_lapic_nmi_watchdog(void)
{
- if (nmi_active <= 0)
+ BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
+
+ if (atomic_read(&nmi_active) <= 0)
return;
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_AMD:
- wrmsr(MSR_K7_EVNTSEL0, 0, 0);
- break;
- case X86_VENDOR_INTEL:
- if (boot_cpu_data.x86 == 15) {
- wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
- wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
- } else if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
- disable_intel_arch_watchdog();
- }
- break;
- }
- nmi_active = -1;
- /* tell do_nmi() and others that we're not active any more */
- nmi_watchdog = 0;
+
+ on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
+
+ BUG_ON(atomic_read(&nmi_active) != 0);
}
static void enable_lapic_nmi_watchdog(void)
{
- if (nmi_active < 0) {
- nmi_watchdog = NMI_LOCAL_APIC;
- touch_nmi_watchdog();
- setup_apic_nmi_watchdog();
- }
-}
+ BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
-int reserve_lapic_nmi(void)
-{
- unsigned int old_owner;
+ /* are we already enabled */
+ if (atomic_read(&nmi_active) != 0)
+ return;
- spin_lock(&lapic_nmi_owner_lock);
- old_owner = lapic_nmi_owner;
- lapic_nmi_owner |= LAPIC_NMI_RESERVED;
- spin_unlock(&lapic_nmi_owner_lock);
- if (old_owner & LAPIC_NMI_RESERVED)
- return -EBUSY;
- if (old_owner & LAPIC_NMI_WATCHDOG)
- disable_lapic_nmi_watchdog();
- return 0;
-}
+ /* are we lapic aware */
+ if (nmi_known_cpu() <= 0)
+ return;
-void release_lapic_nmi(void)
-{
- unsigned int new_owner;
-
- spin_lock(&lapic_nmi_owner_lock);
- new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
- lapic_nmi_owner = new_owner;
- spin_unlock(&lapic_nmi_owner_lock);
- if (new_owner & LAPIC_NMI_WATCHDOG)
- enable_lapic_nmi_watchdog();
+ on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
+ touch_nmi_watchdog();
}
void disable_timer_nmi_watchdog(void)
{
- if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
+ BUG_ON(nmi_watchdog != NMI_IO_APIC);
+
+ if (atomic_read(&nmi_active) <= 0)
return;
disable_irq(0);
- unset_nmi_callback();
- nmi_active = -1;
- nmi_watchdog = NMI_NONE;
+ on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
+
+ BUG_ON(atomic_read(&nmi_active) != 0);
}
void enable_timer_nmi_watchdog(void)
{
- if (nmi_active < 0) {
- nmi_watchdog = NMI_IO_APIC;
+ BUG_ON(nmi_watchdog != NMI_IO_APIC);
+
+ if (atomic_read(&nmi_active) == 0) {
touch_nmi_watchdog();
- nmi_active = 1;
+ on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
enable_irq(0);
}
}
@@ -296,15 +360,20 @@
static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
{
- nmi_pm_active = nmi_active;
- disable_lapic_nmi_watchdog();
+ /* only CPU0 goes here, other CPUs should be offline */
+ nmi_pm_active = atomic_read(&nmi_active);
+ stop_apic_nmi_watchdog(NULL);
+ BUG_ON(atomic_read(&nmi_active) != 0);
return 0;
}
static int lapic_nmi_resume(struct sys_device *dev)
{
- if (nmi_pm_active > 0)
- enable_lapic_nmi_watchdog();
+ /* only CPU0 goes here, other CPUs should be offline */
+ if (nmi_pm_active > 0) {
+ setup_apic_nmi_watchdog(NULL);
+ touch_nmi_watchdog();
+ }
return 0;
}
@@ -323,7 +392,13 @@
{
int error;
- if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
+ /* should really be a BUG_ON but b/c this is an
+ * init call, it just doesn't work. -dcz
+ */
+ if (nmi_watchdog != NMI_LOCAL_APIC)
+ return 0;
+
+ if ( atomic_read(&nmi_active) < 0 )
return 0;
error = sysdev_class_register(&nmi_sysclass);
@@ -341,74 +416,209 @@
* Original code written by Keith Owens.
*/
-static void clear_msr_range(unsigned int base, unsigned int n)
-{
- unsigned int i;
+/* Note that these events don't tick when the CPU idles. This means
+ the frequency varies with CPU load. */
- for(i = 0; i < n; ++i)
- wrmsr(base+i, 0, 0);
-}
+#define K7_EVNTSEL_ENABLE (1 << 22)
+#define K7_EVNTSEL_INT (1 << 20)
+#define K7_EVNTSEL_OS (1 << 17)
+#define K7_EVNTSEL_USR (1 << 16)
+#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
+#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
-static void setup_k7_watchdog(void)
+static int setup_k7_watchdog(void)
{
- int i;
+ unsigned int perfctr_msr, evntsel_msr;
unsigned int evntsel;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
- nmi_perfctr_msr = MSR_K7_PERFCTR0;
+ perfctr_msr = MSR_K7_PERFCTR0;
+ evntsel_msr = MSR_K7_EVNTSEL0;
+ if (!reserve_perfctr_nmi(perfctr_msr))
+ goto fail;
- for(i = 0; i < 4; ++i) {
- /* Simulator may not support it */
- if (checking_wrmsrl(MSR_K7_EVNTSEL0+i, 0UL)) {
- nmi_perfctr_msr = 0;
- return;
- }
- wrmsrl(MSR_K7_PERFCTR0+i, 0UL);
- }
+ if (!reserve_evntsel_nmi(evntsel_msr))
+ goto fail1;
+
+ /* Simulator may not support it */
+ if (checking_wrmsrl(evntsel_msr, 0UL))
+ goto fail2;
+ wrmsrl(perfctr_msr, 0UL);
evntsel = K7_EVNTSEL_INT
| K7_EVNTSEL_OS
| K7_EVNTSEL_USR
| K7_NMI_EVENT;
- wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
- wrmsrl(MSR_K7_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz));
+ /* setup the timer */
+ wrmsr(evntsel_msr, evntsel, 0);
+ wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= K7_EVNTSEL_ENABLE;
- wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
+ wrmsr(evntsel_msr, evntsel, 0);
+
+ wd->perfctr_msr = perfctr_msr;
+ wd->evntsel_msr = evntsel_msr;
+ wd->cccr_msr = 0; //unused
+ wd->check_bit = 1ULL<<63;
+ return 1;
+fail2:
+ release_evntsel_nmi(evntsel_msr);
+fail1:
+ release_perfctr_nmi(perfctr_msr);
+fail:
+ return 0;
}
-static void disable_intel_arch_watchdog(void)
+static void stop_k7_watchdog(void)
{
- unsigned ebx;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
- /*
- * Check whether the Architectural PerfMon supports
- * Unhalted Core Cycles Event or not.
- * NOTE: Corresponding bit = 0 in ebp indicates event present.
- */
- ebx = cpuid_ebx(10);
- if (!(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
- wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, 0, 0);
+ wrmsr(wd->evntsel_msr, 0, 0);
+
+ release_evntsel_nmi(wd->evntsel_msr);
+ release_perfctr_nmi(wd->perfctr_msr);
}
+/* Note that these events don't tick when the CPU idles. This means
+ the frequency varies with CPU load. */
+
+#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
+#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
+#define P4_ESCR_OS (1<<3)
+#define P4_ESCR_USR (1<<2)
+#define P4_CCCR_OVF_PMI0 (1<<26)
+#define P4_CCCR_OVF_PMI1 (1<<27)
+#define P4_CCCR_THRESHOLD(N) ((N)<<20)
+#define P4_CCCR_COMPLEMENT (1<<19)
+#define P4_CCCR_COMPARE (1<<18)
+#define P4_CCCR_REQUIRED (3<<16)
+#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
+#define P4_CCCR_ENABLE (1<<12)
+#define P4_CCCR_OVF (1<<31)
+/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
+ CRU_ESCR0 (with any non-null event selector) through a complemented
+ max threshold. [IA32-Vol3, Section 14.9.9] */
+
+static int setup_p4_watchdog(void)
+{
+ unsigned int perfctr_msr, evntsel_msr, cccr_msr;
+ unsigned int evntsel, cccr_val;
+ unsigned int misc_enable, dummy;
+ unsigned int ht_num;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy);
+ if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
+ return 0;
+
+#ifdef CONFIG_SMP
+ /* detect which hyperthread we are on */
+ if (smp_num_siblings == 2) {
+ unsigned int ebx, apicid;
+
+ ebx = cpuid_ebx(1);
+ apicid = (ebx >> 24) & 0xff;
+ ht_num = apicid & 1;
+ } else
+#endif
+ ht_num = 0;
+
+ /* performance counters are shared resources
+ * assign each hyperthread its own set
+ * (re-use the ESCR0 register, seems safe
+ * and keeps the cccr_val the same)
+ */
+ if (!ht_num) {
+ /* logical cpu 0 */
+ perfctr_msr = MSR_P4_IQ_PERFCTR0;
+ evntsel_msr = MSR_P4_CRU_ESCR0;
+ cccr_msr = MSR_P4_IQ_CCCR0;
+ cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
+ } else {
+ /* logical cpu 1 */
+ perfctr_msr = MSR_P4_IQ_PERFCTR1;
+ evntsel_msr = MSR_P4_CRU_ESCR0;
+ cccr_msr = MSR_P4_IQ_CCCR1;
+ cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
+ }
+
+ if (!reserve_perfctr_nmi(perfctr_msr))
+ goto fail;
+
+ if (!reserve_evntsel_nmi(evntsel_msr))
+ goto fail1;
+
+ evntsel = P4_ESCR_EVENT_SELECT(0x3F)
+ | P4_ESCR_OS
+ | P4_ESCR_USR;
+
+ cccr_val |= P4_CCCR_THRESHOLD(15)
+ | P4_CCCR_COMPLEMENT
+ | P4_CCCR_COMPARE
+ | P4_CCCR_REQUIRED;
+
+ wrmsr(evntsel_msr, evntsel, 0);
+ wrmsr(cccr_msr, cccr_val, 0);
+ wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ cccr_val |= P4_CCCR_ENABLE;
+ wrmsr(cccr_msr, cccr_val, 0);
+
+ wd->perfctr_msr = perfctr_msr;
+ wd->evntsel_msr = evntsel_msr;
+ wd->cccr_msr = cccr_msr;
+ wd->check_bit = 1ULL<<39;
+ return 1;
+fail1:
+ release_perfctr_nmi(perfctr_msr);
+fail:
+ return 0;
+}
+
+static void stop_p4_watchdog(void)
+{
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ wrmsr(wd->cccr_msr, 0, 0);
+ wrmsr(wd->evntsel_msr, 0, 0);
+
+ release_evntsel_nmi(wd->evntsel_msr);
+ release_perfctr_nmi(wd->perfctr_msr);
+}
+
+#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
+#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
+
static int setup_intel_arch_watchdog(void)
{
+ unsigned int ebx;
+ union cpuid10_eax eax;
+ unsigned int unused;
+ unsigned int perfctr_msr, evntsel_msr;
unsigned int evntsel;
- unsigned ebx;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
/*
* Check whether the Architectural PerfMon supports
* Unhalted Core Cycles Event or not.
- * NOTE: Corresponding bit = 0 in ebp indicates event present.
+ * NOTE: Corresponding bit = 0 in ebx indicates event present.
*/
- ebx = cpuid_ebx(10);
- if ((ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
- return 0;
+ cpuid(10, &(eax.full), &ebx, &unused, &unused);
+ if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
+ (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
+ goto fail;
- nmi_perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
+ perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
+ evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
- clear_msr_range(MSR_ARCH_PERFMON_EVENTSEL0, 2);
- clear_msr_range(MSR_ARCH_PERFMON_PERFCTR0, 2);
+ if (!reserve_perfctr_nmi(perfctr_msr))
+ goto fail;
+
+ if (!reserve_evntsel_nmi(evntsel_msr))
+ goto fail1;
+
+ wrmsrl(perfctr_msr, 0UL);
evntsel = ARCH_PERFMON_EVENTSEL_INT
| ARCH_PERFMON_EVENTSEL_OS
@@ -416,84 +626,122 @@
| ARCH_PERFMON_NMI_EVENT_SEL
| ARCH_PERFMON_NMI_EVENT_UMASK;
- wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0);
- wrmsrl(MSR_ARCH_PERFMON_PERFCTR0, -((u64)cpu_khz * 1000 / nmi_hz));
+ /* setup the timer */
+ wrmsr(evntsel_msr, evntsel, 0);
+ wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
+
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
- wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0);
+ wrmsr(evntsel_msr, evntsel, 0);
+
+ wd->perfctr_msr = perfctr_msr;
+ wd->evntsel_msr = evntsel_msr;
+ wd->cccr_msr = 0; //unused
+ wd->check_bit = 1ULL << (eax.split.bit_width - 1);
return 1;
+fail1:
+ release_perfctr_nmi(perfctr_msr);
+fail:
+ return 0;
}
-
-static int setup_p4_watchdog(void)
+static void stop_intel_arch_watchdog(void)
{
- unsigned int misc_enable, dummy;
+ unsigned int ebx;
+ union cpuid10_eax eax;
+ unsigned int unused;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
- rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
- if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
- return 0;
+ /*
+ * Check whether the Architectural PerfMon supports
+ * Unhalted Core Cycles Event or not.
+ * NOTE: Corresponding bit = 0 in ebx indicates event present.
+ */
+ cpuid(10, &(eax.full), &ebx, &unused, &unused);
+ if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
+ (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
+ return;
- nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
- nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
-#ifdef CONFIG_SMP
- if (smp_num_siblings == 2)
- nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
-#endif
+ wrmsr(wd->evntsel_msr, 0, 0);
- if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
- clear_msr_range(0x3F1, 2);
- /* MSR 0x3F0 seems to have a default value of 0xFC00, but current
- docs doesn't fully define it, so leave it alone for now. */
- if (boot_cpu_data.x86_model >= 0x3) {
- /* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
- clear_msr_range(0x3A0, 26);
- clear_msr_range(0x3BC, 3);
- } else {
- clear_msr_range(0x3A0, 31);
- }
- clear_msr_range(0x3C0, 6);
- clear_msr_range(0x3C8, 6);
- clear_msr_range(0x3E0, 2);
- clear_msr_range(MSR_P4_CCCR0, 18);
- clear_msr_range(MSR_P4_PERFCTR0, 18);
-
- wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
- wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
- Dprintk("setting P4_IQ_COUNTER0 to 0x%08lx\n", -(cpu_khz * 1000UL / nmi_hz));
- wrmsrl(MSR_P4_IQ_COUNTER0, -((u64)cpu_khz * 1000 / nmi_hz));
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
- return 1;
+ release_evntsel_nmi(wd->evntsel_msr);
+ release_perfctr_nmi(wd->perfctr_msr);
}
-void setup_apic_nmi_watchdog(void)
+void setup_apic_nmi_watchdog(void *unused)
{
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_AMD:
- if (boot_cpu_data.x86 != 15)
- return;
- if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
- return;
- setup_k7_watchdog();
- break;
- case X86_VENDOR_INTEL:
- if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
- if (!setup_intel_arch_watchdog())
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ /* only support LOCAL and IO APICs for now */
+ if ((nmi_watchdog != NMI_LOCAL_APIC) &&
+ (nmi_watchdog != NMI_IO_APIC))
+ return;
+
+ if (wd->enabled == 1)
+ return;
+
+ /* cheap hack to support suspend/resume */
+ /* if cpu0 is not active neither should the other cpus */
+ if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
+ return;
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
return;
- } else if (boot_cpu_data.x86 == 15) {
+ if (!setup_k7_watchdog())
+ return;
+ break;
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+ if (!setup_intel_arch_watchdog())
+ return;
+ break;
+ }
if (!setup_p4_watchdog())
return;
- } else {
+ break;
+ default:
return;
}
-
- break;
-
- default:
- return;
}
- lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
- nmi_active = 1;
+ wd->enabled = 1;
+ atomic_inc(&nmi_active);
+}
+
+void stop_apic_nmi_watchdog(void *unused)
+{
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+
+ /* only support LOCAL and IO APICs for now */
+ if ((nmi_watchdog != NMI_LOCAL_APIC) &&
+ (nmi_watchdog != NMI_IO_APIC))
+ return;
+
+ if (wd->enabled == 0)
+ return;
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
+ return;
+ stop_k7_watchdog();
+ break;
+ case X86_VENDOR_INTEL:
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+ stop_intel_arch_watchdog();
+ break;
+ }
+ stop_p4_watchdog();
+ break;
+ default:
+ return;
+ }
+ }
+ wd->enabled = 0;
+ atomic_dec(&nmi_active);
}
/*
@@ -526,93 +774,109 @@
touch_softlockup_watchdog();
}
-void __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
+int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
{
int sum;
int touched = 0;
+ struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
+ u64 dummy;
+ int rc=0;
+
+ /* check for other users first */
+ if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
+ == NOTIFY_STOP) {
+ rc = 1;
+ touched = 1;
+ }
sum = read_pda(apic_timer_irqs);
if (__get_cpu_var(nmi_touch)) {
__get_cpu_var(nmi_touch) = 0;
touched = 1;
}
+
#ifdef CONFIG_X86_MCE
/* Could check oops_in_progress here too, but it's safer
not too */
if (atomic_read(&mce_entry) > 0)
touched = 1;
#endif
+ /* if the apic timer isn't firing, this cpu isn't doing much */
if (!touched && __get_cpu_var(last_irq_sum) == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
local_inc(&__get_cpu_var(alert_counter));
- if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) {
- if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
- == NOTIFY_STOP) {
- local_set(&__get_cpu_var(alert_counter), 0);
- return;
- }
- die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs);
- }
+ if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
+ die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
+ panic_on_timeout);
} else {
__get_cpu_var(last_irq_sum) = sum;
local_set(&__get_cpu_var(alert_counter), 0);
}
- if (nmi_perfctr_msr) {
- if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
- /*
- * P4 quirks:
- * - An overflown perfctr will assert its interrupt
- * until the OVF flag in its CCCR is cleared.
- * - LVTPC is masked on interrupt and must be
- * unmasked by the LVTPC handler.
- */
- wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- } else if (nmi_perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
- /*
- * For Intel based architectural perfmon
- * - LVTPC is masked on interrupt and must be
- * unmasked by the LVTPC handler.
+
+ /* see if the nmi watchdog went off */
+ if (wd->enabled) {
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ rdmsrl(wd->perfctr_msr, dummy);
+ if (dummy & wd->check_bit){
+ /* this wasn't a watchdog timer interrupt */
+ goto done;
+ }
+
+ /* only Intel uses the cccr msr */
+ if (wd->cccr_msr != 0) {
+ /*
+ * P4 quirks:
+ * - An overflown perfctr will assert its interrupt
+ * until the OVF flag in its CCCR is cleared.
+ * - LVTPC is masked on interrupt and must be
+ * unmasked by the LVTPC handler.
+ */
+ rdmsrl(wd->cccr_msr, dummy);
+ dummy &= ~P4_CCCR_OVF;
+ wrmsrl(wd->cccr_msr, dummy);
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
+ /*
+ * ArchPerfom/Core Duo needs to re-unmask
+ * the apic vector
+ */
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ }
+ /* start the cycle over again */
+ wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
+ rc = 1;
+ } else if (nmi_watchdog == NMI_IO_APIC) {
+ /* don't know how to accurately check for this.
+ * just assume it was a watchdog timer interrupt
+ * This matches the old behaviour.
*/
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- }
- wrmsrl(nmi_perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
+ rc = 1;
+ } else
+ printk(KERN_WARNING "Unknown enabled NMI hardware?!\n");
}
+done:
+ return rc;
}
-static __kprobes int dummy_nmi_callback(struct pt_regs * regs, int cpu)
-{
- return 0;
-}
-
-static nmi_callback_t nmi_callback = dummy_nmi_callback;
-
asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
{
- int cpu = safe_smp_processor_id();
-
nmi_enter();
add_pda(__nmi_count,1);
- if (!rcu_dereference(nmi_callback)(regs, cpu))
- default_do_nmi(regs);
+ default_do_nmi(regs);
nmi_exit();
}
-void set_nmi_callback(nmi_callback_t callback)
+int do_nmi_callback(struct pt_regs * regs, int cpu)
{
- vmalloc_sync_all();
- rcu_assign_pointer(nmi_callback, callback);
+#ifdef CONFIG_SYSCTL
+ if (unknown_nmi_panic)
+ return unknown_nmi_panic_callback(regs, cpu);
+#endif
+ return 0;
}
-EXPORT_SYMBOL_GPL(set_nmi_callback);
-
-void unset_nmi_callback(void)
-{
- nmi_callback = dummy_nmi_callback;
-}
-EXPORT_SYMBOL_GPL(unset_nmi_callback);
#ifdef CONFIG_SYSCTL
@@ -621,36 +885,42 @@
unsigned char reason = get_nmi_reason();
char buf[64];
- if (!(reason & 0xc0)) {
- sprintf(buf, "NMI received for unknown reason %02x\n", reason);
- die_nmi(buf,regs);
- }
+ sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+ die_nmi(buf, regs, 1); /* Always panic here */
return 0;
}
/*
- * proc handler for /proc/sys/kernel/unknown_nmi_panic
+ * proc handler for /proc/sys/kernel/nmi
*/
-int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file,
+int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
void __user *buffer, size_t *length, loff_t *ppos)
{
int old_state;
- old_state = unknown_nmi_panic;
+ nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
+ old_state = nmi_watchdog_enabled;
proc_dointvec(table, write, file, buffer, length, ppos);
- if (!!old_state == !!unknown_nmi_panic)
+ if (!!old_state == !!nmi_watchdog_enabled)
return 0;
- if (unknown_nmi_panic) {
- if (reserve_lapic_nmi() < 0) {
- unknown_nmi_panic = 0;
- return -EBUSY;
- } else {
- set_nmi_callback(unknown_nmi_panic_callback);
- }
+ if (atomic_read(&nmi_active) < 0) {
+ printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
+ return -EIO;
+ }
+
+ /* if nmi_watchdog is not set yet, then set it */
+ nmi_watchdog_default();
+
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ if (nmi_watchdog_enabled)
+ enable_lapic_nmi_watchdog();
+ else
+ disable_lapic_nmi_watchdog();
} else {
- release_lapic_nmi();
- unset_nmi_callback();
+ printk( KERN_WARNING
+ "NMI watchdog doesn't know what hardware to touch\n");
+ return -EIO;
}
return 0;
}
@@ -659,8 +929,12 @@
EXPORT_SYMBOL(nmi_active);
EXPORT_SYMBOL(nmi_watchdog);
-EXPORT_SYMBOL(reserve_lapic_nmi);
-EXPORT_SYMBOL(release_lapic_nmi);
+EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi);
+EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
+EXPORT_SYMBOL(reserve_perfctr_nmi);
+EXPORT_SYMBOL(release_perfctr_nmi);
+EXPORT_SYMBOL(reserve_evntsel_nmi);
+EXPORT_SYMBOL(release_evntsel_nmi);
EXPORT_SYMBOL(disable_timer_nmi_watchdog);
EXPORT_SYMBOL(enable_timer_nmi_watchdog);
EXPORT_SYMBOL(touch_nmi_watchdog);
diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c
index 146924b..cfb09b0 100644
--- a/arch/x86_64/kernel/pci-calgary.c
+++ b/arch/x86_64/kernel/pci-calgary.c
@@ -86,7 +86,8 @@
#define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */
#define MAX_NUM_CHASSIS 8 /* max number of chassis */
-#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2) /* max dev->bus->number */
+/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
+#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
#define PHBS_PER_CALGARY 4
/* register offsets in Calgary's internal register space */
@@ -111,31 +112,49 @@
0xB000 /* PHB3 */
};
-static char bus_to_phb[MAX_PHB_BUS_NUM];
-void* tce_table_kva[MAX_PHB_BUS_NUM];
unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED;
static int translate_empty_slots __read_mostly = 0;
static int calgary_detected __read_mostly = 0;
-/*
- * the bitmap of PHBs the user requested that we disable
- * translation on.
- */
-static DECLARE_BITMAP(translation_disabled, MAX_PHB_BUS_NUM);
+struct calgary_bus_info {
+ void *tce_space;
+ unsigned char translation_disabled;
+ signed char phbid;
+};
+
+static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
static void tce_cache_blast(struct iommu_table *tbl);
/* enable this to stress test the chip's TCE cache */
#ifdef CONFIG_IOMMU_DEBUG
-static inline void tce_cache_blast_stress(struct iommu_table *tbl)
+int debugging __read_mostly = 1;
+
+static inline unsigned long verify_bit_range(unsigned long* bitmap,
+ int expected, unsigned long start, unsigned long end)
{
- tce_cache_blast(tbl);
+ unsigned long idx = start;
+
+ BUG_ON(start >= end);
+
+ while (idx < end) {
+ if (!!test_bit(idx, bitmap) != expected)
+ return idx;
+ ++idx;
+ }
+
+ /* all bits have the expected value */
+ return ~0UL;
}
-#else
-static inline void tce_cache_blast_stress(struct iommu_table *tbl)
+#else /* debugging is disabled */
+int debugging __read_mostly = 0;
+
+static inline unsigned long verify_bit_range(unsigned long* bitmap,
+ int expected, unsigned long start, unsigned long end)
{
+ return ~0UL;
}
-#endif /* BLAST_TCE_CACHE_ON_UNMAP */
+#endif /* CONFIG_IOMMU_DEBUG */
static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen)
{
@@ -149,7 +168,7 @@
static inline int translate_phb(struct pci_dev* dev)
{
- int disabled = test_bit(dev->bus->number, translation_disabled);
+ int disabled = bus_info[dev->bus->number].translation_disabled;
return !disabled;
}
@@ -158,6 +177,7 @@
{
unsigned long index;
unsigned long end;
+ unsigned long badbit;
index = start_addr >> PAGE_SHIFT;
@@ -169,14 +189,15 @@
if (end > tbl->it_size) /* don't go off the table */
end = tbl->it_size;
- while (index < end) {
- if (test_bit(index, tbl->it_map))
+ badbit = verify_bit_range(tbl->it_map, 0, index, end);
+ if (badbit != ~0UL) {
+ if (printk_ratelimit())
printk(KERN_ERR "Calgary: entry already allocated at "
"0x%lx tbl %p dma 0x%lx npages %u\n",
- index, tbl, start_addr, npages);
- ++index;
+ badbit, tbl, start_addr, npages);
}
- set_bit_string(tbl->it_map, start_addr >> PAGE_SHIFT, npages);
+
+ set_bit_string(tbl->it_map, index, npages);
}
static unsigned long iommu_range_alloc(struct iommu_table *tbl,
@@ -243,7 +264,7 @@
unsigned int npages)
{
unsigned long entry;
- unsigned long i;
+ unsigned long badbit;
entry = dma_addr >> PAGE_SHIFT;
@@ -251,16 +272,15 @@
tce_free(tbl, entry, npages);
- for (i = 0; i < npages; ++i) {
- if (!test_bit(entry + i, tbl->it_map))
+ badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages);
+ if (badbit != ~0UL) {
+ if (printk_ratelimit())
printk(KERN_ERR "Calgary: bit is off at 0x%lx "
"tbl %p dma 0x%Lx entry 0x%lx npages %u\n",
- entry + i, tbl, dma_addr, entry, npages);
+ badbit, tbl, dma_addr, entry, npages);
}
__clear_bit_string(tbl->it_map, entry, npages);
-
- tce_cache_blast_stress(tbl);
}
static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
@@ -454,7 +474,7 @@
static inline int busno_to_phbid(unsigned char num)
{
- return bus_to_phb[num];
+ return bus_info[num].phbid;
}
static inline unsigned long split_queue_offset(unsigned char num)
@@ -631,6 +651,10 @@
if (ret)
return ret;
+ tbl = dev->sysdata;
+ tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
+ tce_free(tbl, 0, tbl->it_size);
+
calgary_reserve_regions(dev);
/* set TARs for each PHB */
@@ -654,11 +678,12 @@
return 0;
}
-static void __init calgary_free_tar(struct pci_dev *dev)
+static void __init calgary_free_bus(struct pci_dev *dev)
{
u64 val64;
struct iommu_table *tbl = dev->sysdata;
void __iomem *target;
+ unsigned int bitmapsz;
target = calgary_reg(tbl->bbar, tar_offset(dev->bus->number));
val64 = be64_to_cpu(readq(target));
@@ -666,8 +691,15 @@
writeq(cpu_to_be64(val64), target);
readq(target); /* flush */
+ bitmapsz = tbl->it_size / BITS_PER_BYTE;
+ free_pages((unsigned long)tbl->it_map, get_order(bitmapsz));
+ tbl->it_map = NULL;
+
kfree(tbl);
dev->sysdata = NULL;
+
+ /* Can't free bootmem allocated memory after system is up :-( */
+ bus_info[dev->bus->number].tce_space = NULL;
}
static void calgary_watchdog(unsigned long data)
@@ -772,12 +804,11 @@
return address;
}
-static int __init calgary_init_one_nontraslated(struct pci_dev *dev)
+static void __init calgary_init_one_nontraslated(struct pci_dev *dev)
{
+ pci_dev_get(dev);
dev->sysdata = NULL;
dev->bus->self = dev;
-
- return 0;
}
static int __init calgary_init_one(struct pci_dev *dev)
@@ -798,6 +829,7 @@
if (ret)
goto iounmap;
+ pci_dev_get(dev);
dev->bus->self = dev;
calgary_enable_translation(dev);
@@ -824,10 +856,9 @@
calgary_init_one_nontraslated(dev);
continue;
}
- if (!tce_table_kva[dev->bus->number] && !translate_empty_slots) {
- pci_dev_put(dev);
+ if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots)
continue;
- }
+
ret = calgary_init_one(dev);
if (ret)
goto error;
@@ -840,15 +871,18 @@
dev = pci_find_device_reverse(PCI_VENDOR_ID_IBM,
PCI_DEVICE_ID_IBM_CALGARY,
dev);
+ if (!dev)
+ break;
if (!translate_phb(dev)) {
pci_dev_put(dev);
continue;
}
- if (!tce_table_kva[dev->bus->number] && !translate_empty_slots)
+ if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots)
continue;
+
calgary_disable_translation(dev);
- calgary_free_tar(dev);
- pci_dev_put(dev);
+ calgary_free_bus(dev);
+ pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
}
return ret;
@@ -890,13 +924,15 @@
if (swiotlb || no_iommu || iommu_detected)
return;
+ if (!early_pci_allowed())
+ return;
+
specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
int dev;
-
- tce_table_kva[bus] = NULL;
- bus_to_phb[bus] = -1;
+ struct calgary_bus_info *info = &bus_info[bus];
+ info->phbid = -1;
if (read_pci_config(bus, 0, 0, 0) != PCI_VENDOR_DEVICE_ID_CALGARY)
continue;
@@ -907,12 +943,9 @@
*/
phb = (phb + 1) % PHBS_PER_CALGARY;
- if (test_bit(bus, translation_disabled)) {
- printk(KERN_INFO "Calgary: translation is disabled for "
- "PHB 0x%x\n", bus);
- /* skip this phb, don't allocate a tbl for it */
+ if (info->translation_disabled)
continue;
- }
+
/*
* Scan the slots of the PCI bus to see if there is a device present.
* The parent bus will be the zero-ith device, so start at 1.
@@ -923,8 +956,8 @@
tbl = alloc_tce_table();
if (!tbl)
goto cleanup;
- tce_table_kva[bus] = tbl;
- bus_to_phb[bus] = phb;
+ info->tce_space = tbl;
+ info->phbid = phb;
calgary_found = 1;
break;
}
@@ -934,15 +967,20 @@
if (calgary_found) {
iommu_detected = 1;
calgary_detected = 1;
- printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected. "
- "TCE table spec is %d.\n", specified_table_size);
+ printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n");
+ printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
+ "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
+ debugging ? "enabled" : "disabled");
}
return;
cleanup:
- for (--bus; bus >= 0; --bus)
- if (tce_table_kva[bus])
- free_tce_table(tce_table_kva[bus]);
+ for (--bus; bus >= 0; --bus) {
+ struct calgary_bus_info *info = &bus_info[bus];
+
+ if (info->tce_space)
+ free_tce_table(info->tce_space);
+ }
}
int __init calgary_iommu_init(void)
@@ -1016,7 +1054,7 @@
if (bridge < MAX_PHB_BUS_NUM) {
printk(KERN_INFO "Calgary: disabling "
"translation for PHB 0x%x\n", bridge);
- set_bit(bridge, translation_disabled);
+ bus_info[bridge].translation_disabled = 1;
}
}
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index 9c44f4f..4dcb671 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -236,6 +236,9 @@
{
iommu_merge = 1;
+ if (!p)
+ return -EINVAL;
+
while (*p) {
if (!strncmp(p,"off",3))
no_iommu = 1;
@@ -278,9 +281,9 @@
if (*p == ',')
++p;
}
- return 1;
+ return 0;
}
-__setup("iommu=", iommu_setup);
+early_param("iommu", iommu_setup);
void __init pci_iommu_alloc(void)
{
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index 6d3e61b..16261a8 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -239,8 +239,6 @@
{
unsigned long phys_mem, bus;
- BUG_ON(dir == DMA_NONE);
-
if (!dev)
dev = &fallback_dev;
@@ -383,7 +381,6 @@
unsigned long pages = 0;
int need = 0, nextneed;
- BUG_ON(dir == DMA_NONE);
if (nents == 0)
return 0;
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index aad7609..df09ab0 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -59,7 +59,6 @@
{
int i;
- BUG_ON(direction == DMA_NONE);
for (i = 0; i < nents; i++ ) {
struct scatterlist *s = &sg[i];
BUG_ON(!s->page);
diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c
index bb6745d..458006a 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86_64/kernel/process.c
@@ -80,25 +80,25 @@
}
EXPORT_SYMBOL(idle_notifier_unregister);
-enum idle_state { CPU_IDLE, CPU_NOT_IDLE };
-static DEFINE_PER_CPU(enum idle_state, idle_state) = CPU_NOT_IDLE;
-
void enter_idle(void)
{
- __get_cpu_var(idle_state) = CPU_IDLE;
+ write_pda(isidle, 1);
atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL);
}
static void __exit_idle(void)
{
- __get_cpu_var(idle_state) = CPU_NOT_IDLE;
+ if (read_pda(isidle) == 0)
+ return;
+ write_pda(isidle, 0);
atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL);
}
/* Called from interrupts to signify idle end */
void exit_idle(void)
{
- if (current->pid | read_pda(irqcount))
+ /* idle loop has pid 0 */
+ if (current->pid)
return;
__exit_idle();
}
@@ -220,6 +220,9 @@
play_dead();
enter_idle();
idle();
+ /* In many cases the interrupt that ended idle
+ has already called exit_idle. But some idle
+ loops can be woken up without interrupt. */
__exit_idle();
}
@@ -350,6 +353,7 @@
kfree(t->io_bitmap_ptr);
t->io_bitmap_ptr = NULL;
+ clear_thread_flag(TIF_IO_BITMAP);
/*
* Careful, clear this in the TSS too:
*/
@@ -369,6 +373,7 @@
if (t->flags & _TIF_IA32)
current_thread_info()->status |= TS_COMPAT;
}
+ t->flags &= ~_TIF_DEBUG;
tsk->thread.debugreg0 = 0;
tsk->thread.debugreg1 = 0;
@@ -461,7 +466,7 @@
asm("mov %%es,%0" : "=m" (p->thread.es));
asm("mov %%ds,%0" : "=m" (p->thread.ds));
- if (unlikely(me->thread.io_bitmap_ptr != NULL)) {
+ if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
if (!p->thread.io_bitmap_ptr) {
p->thread.io_bitmap_max = 0;
@@ -469,6 +474,7 @@
}
memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr,
IO_BITMAP_BYTES);
+ set_tsk_thread_flag(p, TIF_IO_BITMAP);
}
/*
@@ -498,6 +504,40 @@
*/
#define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r)
+static inline void __switch_to_xtra(struct task_struct *prev_p,
+ struct task_struct *next_p,
+ struct tss_struct *tss)
+{
+ struct thread_struct *prev, *next;
+
+ prev = &prev_p->thread,
+ next = &next_p->thread;
+
+ if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
+ loaddebug(next, 0);
+ loaddebug(next, 1);
+ loaddebug(next, 2);
+ loaddebug(next, 3);
+ /* no 4 and 5 */
+ loaddebug(next, 6);
+ loaddebug(next, 7);
+ }
+
+ if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
+ /*
+ * Copy the relevant range of the IO bitmap.
+ * Normally this is 128 bytes or less:
+ */
+ memcpy(tss->io_bitmap, next->io_bitmap_ptr,
+ max(prev->io_bitmap_max, next->io_bitmap_max));
+ } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) {
+ /*
+ * Clear any possible leftover bits:
+ */
+ memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
+ }
+}
+
/*
* switch_to(x,y) should switch tasks from x to y.
*
@@ -515,6 +555,10 @@
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
+ /* we're going to use this soon, after a few expensive things */
+ if (next_p->fpu_counter>5)
+ prefetch(&next->i387.fxsave);
+
/*
* Reload esp0, LDT and the page table pointer:
*/
@@ -583,41 +627,29 @@
And the AMD workaround requires it to be after DS reload. */
unlazy_fpu(prev_p);
write_pda(kernelstack,
- task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
+ (unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
+#ifdef CONFIG_CC_STACKPROTECTOR
+ write_pda(stack_canary, next_p->stack_canary);
+ /*
+ * Build time only check to make sure the stack_canary is at
+ * offset 40 in the pda; this is a gcc ABI requirement
+ */
+ BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40);
+#endif
/*
- * Now maybe reload the debug registers
+ * Now maybe reload the debug registers and handle I/O bitmaps
*/
- if (unlikely(next->debugreg7)) {
- loaddebug(next, 0);
- loaddebug(next, 1);
- loaddebug(next, 2);
- loaddebug(next, 3);
- /* no 4 and 5 */
- loaddebug(next, 6);
- loaddebug(next, 7);
- }
+ if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW))
+ || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP))
+ __switch_to_xtra(prev_p, next_p, tss);
-
- /*
- * Handle the IO bitmap
- */
- if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr)) {
- if (next->io_bitmap_ptr)
- /*
- * Copy the relevant range of the IO bitmap.
- * Normally this is 128 bytes or less:
- */
- memcpy(tss->io_bitmap, next->io_bitmap_ptr,
- max(prev->io_bitmap_max, next->io_bitmap_max));
- else {
- /*
- * Clear any possible leftover bits:
- */
- memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
- }
- }
-
+ /* If the task has used fpu the last 5 timeslices, just do a full
+ * restore of the math state immediately to avoid the trap; the
+ * chances of needing FPU soon are obviously high now
+ */
+ if (next_p->fpu_counter>5)
+ math_state_restore();
return prev_p;
}
@@ -834,7 +866,7 @@
unsigned long arch_align_stack(unsigned long sp)
{
- if (randomize_va_space)
+ if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
sp -= get_random_int() % 8192;
return sp & ~0xf;
}
diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c
index 2d50024..addc14a 100644
--- a/arch/x86_64/kernel/ptrace.c
+++ b/arch/x86_64/kernel/ptrace.c
@@ -116,17 +116,17 @@
return addr;
}
-static int is_at_popf(struct task_struct *child, struct pt_regs *regs)
+static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
{
int i, copied;
- unsigned char opcode[16];
+ unsigned char opcode[15];
unsigned long addr = convert_rip_to_linear(child, regs);
copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0);
for (i = 0; i < copied; i++) {
switch (opcode[i]) {
- /* popf */
- case 0x9d:
+ /* popf and iret */
+ case 0x9d: case 0xcf:
return 1;
/* CHECKME: 64 65 */
@@ -138,14 +138,17 @@
case 0x26: case 0x2e:
case 0x36: case 0x3e:
case 0x64: case 0x65:
- case 0xf0: case 0xf2: case 0xf3:
+ case 0xf2: case 0xf3:
continue;
- /* REX prefixes */
case 0x40 ... 0x4f:
+ if (regs->cs != __USER_CS)
+ /* 32-bit mode: register increment */
+ return 0;
+ /* 64-bit mode: REX prefix */
continue;
- /* CHECKME: f0, f2, f3 */
+ /* CHECKME: f2, f3 */
/*
* pushf: NOTE! We should probably not let
@@ -186,10 +189,8 @@
* ..but if TF is changed by the instruction we will trace,
* don't mark it as being "us" that set it, so that we
* won't clear it by hand later.
- *
- * AK: this is not enough, LAHF and IRET can change TF in user space too.
*/
- if (is_at_popf(child, regs))
+ if (is_setting_trap_flag(child, regs))
return;
child->ptrace |= PT_DTRACE;
@@ -420,9 +421,13 @@
if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
break;
if (i == 4) {
- child->thread.debugreg7 = data;
+ child->thread.debugreg7 = data;
+ if (data)
+ set_tsk_thread_flag(child, TIF_DEBUG);
+ else
+ clear_tsk_thread_flag(child, TIF_DEBUG);
ret = 0;
- }
+ }
break;
}
break;
diff --git a/arch/x86_64/kernel/relocate_kernel.S b/arch/x86_64/kernel/relocate_kernel.S
index d24fa9b..14e9587 100644
--- a/arch/x86_64/kernel/relocate_kernel.S
+++ b/arch/x86_64/kernel/relocate_kernel.S
@@ -7,31 +7,169 @@
*/
#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/kexec.h>
- /*
- * Must be relocatable PIC code callable as a C function, that once
- * it starts can not use the previous processes stack.
- */
- .globl relocate_new_kernel
+/*
+ * Must be relocatable PIC code callable as a C function
+ */
+
+#define PTR(x) (x << 3)
+#define PAGE_ALIGNED (1 << PAGE_SHIFT)
+#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
+
+ .text
+ .align PAGE_ALIGNED
.code64
-relocate_new_kernel:
- /* %rdi page_list
- * %rsi reboot_code_buffer
+ .globl relocate_kernel
+relocate_kernel:
+ /* %rdi indirection_page
+ * %rsi page_list
* %rdx start address
- * %rcx page_table
- * %r8 arg5
- * %r9 arg6
+ */
+
+ /* map the control page at its virtual address */
+
+ movq $0x0000ff8000000000, %r10 /* mask */
+ mov $(39 - 3), %cl /* bits to shift */
+ movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PGD)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_PUD_0)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+ shrq $9, %r10
+ sub $9, %cl
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PUD_0)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_PMD_0)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+ shrq $9, %r10
+ sub $9, %cl
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PMD_0)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_PTE_0)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+ shrq $9, %r10
+ sub $9, %cl
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PTE_0)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+ /* identity map the control page at its physical address */
+
+ movq $0x0000ff8000000000, %r10 /* mask */
+ mov $(39 - 3), %cl /* bits to shift */
+ movq PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PGD)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_PUD_1)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+ shrq $9, %r10
+ sub $9, %cl
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PUD_1)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_PMD_1)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+ shrq $9, %r10
+ sub $9, %cl
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PMD_1)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_PTE_1)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+ shrq $9, %r10
+ sub $9, %cl
+
+ movq %r11, %r9
+ andq %r10, %r9
+ shrq %cl, %r9
+
+ movq PTR(VA_PTE_1)(%rsi), %r8
+ addq %r8, %r9
+ movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
+ orq $PAGE_ATTR, %r8
+ movq %r8, (%r9)
+
+relocate_new_kernel:
+ /* %rdi indirection_page
+ * %rsi page_list
+ * %rdx start address
*/
/* zero out flags, and disable interrupts */
pushq $0
popfq
- /* set a new stack at the bottom of our page... */
- lea 4096(%rsi), %rsp
+ /* get physical address of control page now */
+ /* this is impossible after page table switch */
+ movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
- /* store the parameters back on the stack */
- pushq %rdx /* store the start address */
+ /* get physical address of page table now too */
+ movq PTR(PA_TABLE_PAGE)(%rsi), %rcx
+
+ /* switch to new set of page tables */
+ movq PTR(PA_PGD)(%rsi), %r9
+ movq %r9, %cr3
+
+ /* setup a new stack at the end of the physical control page */
+ lea 4096(%r8), %rsp
+
+ /* jump to identity mapped page */
+ addq $(identity_mapped - relocate_kernel), %r8
+ pushq %r8
+ ret
+
+identity_mapped:
+ /* store the start address on the stack */
+ pushq %rdx
/* Set cr0 to a known state:
* 31 1 == Paging enabled
@@ -136,8 +274,3 @@
xorq %r15, %r15
ret
-relocate_new_kernel_end:
-
- .globl relocate_new_kernel_size
-relocate_new_kernel_size:
- .quad relocate_new_kernel_end - relocate_new_kernel
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 4b39f0d..0b00bb2 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -74,16 +74,6 @@
unsigned long mmu_cr4_features;
-int acpi_disabled;
-EXPORT_SYMBOL(acpi_disabled);
-#ifdef CONFIG_ACPI
-extern int __initdata acpi_ht;
-extern acpi_interrupt_flags acpi_sci_flags;
-int __initdata acpi_force = 0;
-#endif
-
-int acpi_numa __initdata;
-
/* Boot loader ID as an integer, for the benefit of proc_dointvec */
int bootloader_type;
@@ -107,7 +97,6 @@
struct edid_info edid_info;
EXPORT_SYMBOL_GPL(edid_info);
-struct e820map e820;
extern int root_mountflags;
@@ -276,184 +265,21 @@
}
}
-/* Check for full argument with no trailing characters */
-static int fullarg(char *p, char *arg)
-{
- int l = strlen(arg);
- return !memcmp(p, arg, l) && (p[l] == 0 || isspace(p[l]));
-}
-
-static __init void parse_cmdline_early (char ** cmdline_p)
-{
- char c = ' ', *to = command_line, *from = COMMAND_LINE;
- int len = 0;
- int userdef = 0;
-
- for (;;) {
- if (c != ' ')
- goto next_char;
-
-#ifdef CONFIG_SMP
- /*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
- else if (!memcmp(from, "maxcpus=", 8)) {
- extern unsigned int maxcpus;
-
- maxcpus = simple_strtoul(from + 8, NULL, 0);
- }
-#endif
-#ifdef CONFIG_ACPI
- /* "acpi=off" disables both ACPI table parsing and interpreter init */
- if (fullarg(from,"acpi=off"))
- disable_acpi();
-
- if (fullarg(from, "acpi=force")) {
- /* add later when we do DMI horrors: */
- acpi_force = 1;
- acpi_disabled = 0;
- }
-
- /* acpi=ht just means: do ACPI MADT parsing
- at bootup, but don't enable the full ACPI interpreter */
- if (fullarg(from, "acpi=ht")) {
- if (!acpi_force)
- disable_acpi();
- acpi_ht = 1;
- }
- else if (fullarg(from, "pci=noacpi"))
- acpi_disable_pci();
- else if (fullarg(from, "acpi=noirq"))
- acpi_noirq_set();
-
- else if (fullarg(from, "acpi_sci=edge"))
- acpi_sci_flags.trigger = 1;
- else if (fullarg(from, "acpi_sci=level"))
- acpi_sci_flags.trigger = 3;
- else if (fullarg(from, "acpi_sci=high"))
- acpi_sci_flags.polarity = 1;
- else if (fullarg(from, "acpi_sci=low"))
- acpi_sci_flags.polarity = 3;
-
- /* acpi=strict disables out-of-spec workarounds */
- else if (fullarg(from, "acpi=strict")) {
- acpi_strict = 1;
- }
-#ifdef CONFIG_X86_IO_APIC
- else if (fullarg(from, "acpi_skip_timer_override"))
- acpi_skip_timer_override = 1;
-#endif
-#endif
-
- if (fullarg(from, "disable_timer_pin_1"))
- disable_timer_pin_1 = 1;
- if (fullarg(from, "enable_timer_pin_1"))
- disable_timer_pin_1 = -1;
-
- if (fullarg(from, "nolapic") || fullarg(from, "disableapic")) {
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- disable_apic = 1;
- }
-
- if (fullarg(from, "noapic"))
- skip_ioapic_setup = 1;
-
- if (fullarg(from,"apic")) {
- skip_ioapic_setup = 0;
- ioapic_force = 1;
- }
-
- if (!memcmp(from, "mem=", 4))
- parse_memopt(from+4, &from);
-
- if (!memcmp(from, "memmap=", 7)) {
- /* exactmap option is for used defined memory */
- if (!memcmp(from+7, "exactmap", 8)) {
-#ifdef CONFIG_CRASH_DUMP
- /* If we are doing a crash dump, we
- * still need to know the real mem
- * size before original memory map is
- * reset.
- */
- saved_max_pfn = e820_end_of_ram();
-#endif
- from += 8+7;
- end_pfn_map = 0;
- e820.nr_map = 0;
- userdef = 1;
- }
- else {
- parse_memmapopt(from+7, &from);
- userdef = 1;
- }
- }
-
-#ifdef CONFIG_NUMA
- if (!memcmp(from, "numa=", 5))
- numa_setup(from+5);
-#endif
-
- if (!memcmp(from,"iommu=",6)) {
- iommu_setup(from+6);
- }
-
- if (fullarg(from,"oops=panic"))
- panic_on_oops = 1;
-
- if (!memcmp(from, "noexec=", 7))
- nonx_setup(from + 7);
-
-#ifdef CONFIG_KEXEC
- /* crashkernel=size@addr specifies the location to reserve for
- * a crash kernel. By reserving this memory we guarantee
- * that linux never set's it up as a DMA target.
- * Useful for holding code to do something appropriate
- * after a kernel panic.
- */
- else if (!memcmp(from, "crashkernel=", 12)) {
- unsigned long size, base;
- size = memparse(from+12, &from);
- if (*from == '@') {
- base = memparse(from+1, &from);
- /* FIXME: Do I want a sanity check
- * to validate the memory range?
- */
- crashk_res.start = base;
- crashk_res.end = base + size - 1;
- }
- }
-#endif
-
#ifdef CONFIG_PROC_VMCORE
- /* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
- else if(!memcmp(from, "elfcorehdr=", 11))
- elfcorehdr_addr = memparse(from+11, &from);
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
- else if (!memcmp(from, "additional_cpus=", 16))
- setup_additional_cpus(from+16);
-#endif
-
- next_char:
- c = *(from++);
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *(to++) = c;
- }
- if (userdef) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- e820_print_map("user");
- }
- *to = '\0';
- *cmdline_p = command_line;
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel. This option will be passed
+ * by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+ char *end;
+ if (!arg)
+ return -EINVAL;
+ elfcorehdr_addr = memparse(arg, &end);
+ return end > arg ? 0 : -EINVAL;
}
+early_param("elfcorehdr", setup_elfcorehdr);
+#endif
#ifndef CONFIG_NUMA
static void __init
@@ -466,7 +292,8 @@
if (bootmap == -1L)
panic("Cannot find bootmem map of size %ld\n",bootmap_size);
bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
- e820_bootmem_free(NODE_DATA(0), 0, end_pfn << PAGE_SHIFT);
+ e820_register_active_regions(0, start_pfn, end_pfn);
+ free_bootmem_with_active_regions(0, end_pfn);
reserve_bootmem(bootmap, bootmap_size);
}
#endif
@@ -521,6 +348,8 @@
void __init setup_arch(char **cmdline_p)
{
+ printk(KERN_INFO "Command line: %s\n", saved_command_line);
+
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
screen_info = SCREEN_INFO;
edid_info = EDID_INFO;
@@ -547,16 +376,22 @@
data_resource.start = virt_to_phys(&_etext);
data_resource.end = virt_to_phys(&_edata)-1;
- parse_cmdline_early(cmdline_p);
-
early_identify_cpu(&boot_cpu_data);
+ strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE);
+ *cmdline_p = command_line;
+
+ parse_early_param();
+
+ finish_e820_parsing();
+
+ e820_register_active_regions(0, 0, -1UL);
/*
* partially used pages are not usable - thus
* we are rounding upwards:
*/
end_pfn = e820_end_of_ram();
- num_physpages = end_pfn; /* for pfn_valid */
+ num_physpages = end_pfn;
check_efer();
@@ -576,6 +411,14 @@
acpi_boot_table_init();
#endif
+ /* How many end-of-memory variables you have, grandma! */
+ max_low_pfn = end_pfn;
+ max_pfn = end_pfn;
+ high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1;
+
+ /* Remove active ranges so rediscovery with NUMA-awareness happens */
+ remove_all_active_ranges();
+
#ifdef CONFIG_ACPI_NUMA
/*
* Parse SRAT to discover nodes.
@@ -625,12 +468,10 @@
*/
acpi_reserve_bootmem();
#endif
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* Find and reserve possible boot-time SMP configuration:
*/
find_smp_config();
-#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (end_pfn << PAGE_SHIFT)) {
@@ -657,7 +498,9 @@
paging_init();
- check_ioapic();
+#ifdef CONFIG_PCI
+ early_quirks();
+#endif
/*
* set this early, so we dont allocate cpu0
@@ -674,14 +517,12 @@
init_cpu_to_node();
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* get boot-time SMP configuration:
*/
if (smp_found_config)
get_smp_config();
init_apic_mappings();
-#endif
/*
* Request address space for all standard RAM and ROM resources
@@ -839,7 +680,7 @@
#endif
}
-static void __init init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit init_amd(struct cpuinfo_x86 *c)
{
unsigned level;
@@ -895,6 +736,12 @@
/* Fix cpuid4 emulation for more */
num_cache_leaves = 3;
+
+ /* When there is only one core no need to synchronize RDTSC */
+ if (num_possible_cpus() == 1)
+ set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
+ else
+ clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
}
static void __cpuinit detect_ht(struct cpuinfo_x86 *c)
@@ -976,8 +823,7 @@
node = first_node(node_online_map);
numa_set_node(cpu, node);
- if (acpi_numa > 0)
- printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
+ printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
#endif
}
@@ -1011,6 +857,8 @@
if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
(c->x86 == 0x6 && c->x86_model >= 0x0e))
set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+ if (c->x86 == 6)
+ set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
c->x86_max_cores = intel_num_cpu_cores(c);
@@ -1229,8 +1077,8 @@
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
- "tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
+ NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index 417de56..8c4b80f 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -24,7 +24,7 @@
#include <asm/proto.h>
#include <asm/sections.h>
-char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,};
+char x86_boot_params[BOOT_PARAM_SIZE] __initdata;
cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
@@ -46,8 +46,10 @@
on Enable(default)
off Disable
*/
-int __init nonx_setup(char *str)
+static int __init nonx_setup(char *str)
{
+ if (!str)
+ return -EINVAL;
if (!strncmp(str, "on", 2)) {
__supported_pte_mask |= _PAGE_NX;
do_not_nx = 0;
@@ -55,9 +57,9 @@
do_not_nx = 1;
__supported_pte_mask &= ~_PAGE_NX;
}
- return 1;
+ return 0;
}
-__setup("noexec=", nonx_setup); /* parsed early actually */
+early_param("noexec", nonx_setup);
int force_personality32 = 0;
@@ -93,12 +95,9 @@
#endif
/* Copy section for each CPU (we discard the original) */
- size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
-#ifdef CONFIG_MODULES
- if (size < PERCPU_ENOUGH_ROOM)
- size = PERCPU_ENOUGH_ROOM;
-#endif
+ size = PERCPU_ENOUGH_ROOM;
+ printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size);
for_each_cpu_mask (i, cpu_possible_map) {
char *ptr;
@@ -122,7 +121,10 @@
/* Setup up data that may be needed in __get_free_pages early */
asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0));
+ /* Memory clobbers used to order PDA accessed */
+ mb();
wrmsrl(MSR_GS_BASE, pda);
+ mb();
pda->cpunumber = cpu;
pda->irqcount = -1;
@@ -178,6 +180,8 @@
}
}
+unsigned long kernel_eflags;
+
/*
* cpu_init() initializes state that is per-CPU. Some data is already
* initialized (naturally) in the bootstrap process, such as the GDT
@@ -235,28 +239,17 @@
* set up and load the per-CPU TSS
*/
for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ static const unsigned int order[N_EXCEPTION_STACKS] = {
+ [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+ [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+ };
if (cpu) {
- static const unsigned int order[N_EXCEPTION_STACKS] = {
- [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
- [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
- };
-
estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
if (!estacks)
panic("Cannot allocate exception stack %ld %d\n",
v, cpu);
}
- switch (v + 1) {
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
- case DEBUG_STACK:
- cpu_pda(cpu)->debugstack = (unsigned long)estacks;
- estacks += DEBUG_STKSZ;
- break;
-#endif
- default:
- estacks += EXCEPTION_STKSZ;
- break;
- }
+ estacks += PAGE_SIZE << order[v];
orig_ist->ist[v] = t->ist[v] = (unsigned long)estacks;
}
@@ -290,4 +283,6 @@
set_debugreg(0UL, 7);
fpu_init();
+
+ raw_local_save_flags(kernel_eflags);
}
diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c
index 2816117..49ec324 100644
--- a/arch/x86_64/kernel/signal.c
+++ b/arch/x86_64/kernel/signal.c
@@ -38,37 +38,6 @@
sigset_t *set, struct pt_regs * regs);
asmlinkage long
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-#ifdef DEBUG_SIG
- printk("rt_sigsuspend savset(%lx) newset(%lx) regs(%p) rip(%lx)\n",
- saveset, newset, regs, regs->rip);
-#endif
- regs->rax = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
-}
-
-asmlinkage long
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs)
{
@@ -308,11 +277,6 @@
#endif
/* Set up registers for signal handler */
- {
- struct exec_domain *ed = current_thread_info()->exec_domain;
- if (unlikely(ed && ed->signal_invmap && sig < 32))
- sig = ed->signal_invmap[sig];
- }
regs->rdi = sig;
/* In case the signal handler was declared without prototypes */
regs->rax = 0;
@@ -341,11 +305,11 @@
current->comm, current->pid, frame, regs->rip, frame->pretcode);
#endif
- return 1;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
- return 0;
+ return -EFAULT;
}
/*
@@ -408,7 +372,7 @@
#endif
ret = setup_rt_frame(sig, ka, info, oldset, regs);
- if (ret) {
+ if (ret == 0) {
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
@@ -425,11 +389,12 @@
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+static void do_signal(struct pt_regs *regs)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
+ sigset_t *oldset;
/*
* We want the common case to go fast, which
@@ -438,9 +403,11 @@
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -454,30 +421,46 @@
set_debugreg(current->thread.debugreg7, 7);
/* Whee! Actually deliver the signal. */
- return handle_signal(signr, &info, &ka, oldset, regs);
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+ return;
}
/* Did we come from a system call? */
if ((long)regs->orig_rax >= 0) {
/* Restart the system call - no handlers present */
long res = regs->rax;
- if (res == -ERESTARTNOHAND ||
- res == -ERESTARTSYS ||
- res == -ERESTARTNOINTR) {
+ switch (res) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
regs->rax = regs->orig_rax;
regs->rip -= 2;
- }
- if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) {
+ break;
+ case -ERESTART_RESTARTBLOCK:
regs->rax = test_thread_flag(TIF_IA32) ?
__NR_ia32_restart_syscall :
__NR_restart_syscall;
regs->rip -= 2;
+ break;
}
}
- return 0;
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ back. */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
-void do_notify_resume(struct pt_regs *regs, sigset_t *oldset, __u32 thread_info_flags)
+void
+do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
{
#ifdef DEBUG_SIG
printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%lx pending:%lx\n",
@@ -491,8 +474,8 @@
}
/* deal with pending signal delivery */
- if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(regs,oldset);
+ if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK))
+ do_signal(regs);
}
void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
index 06af6ca..4f67697 100644
--- a/arch/x86_64/kernel/smp.c
+++ b/arch/x86_64/kernel/smp.c
@@ -522,26 +522,3 @@
}
}
-int safe_smp_processor_id(void)
-{
- unsigned apicid, i;
-
- if (disable_apic)
- return 0;
-
- apicid = hard_smp_processor_id();
- if (apicid < NR_CPUS && x86_cpu_to_apicid[apicid] == apicid)
- return apicid;
-
- for (i = 0; i < NR_CPUS; ++i) {
- if (x86_cpu_to_apicid[i] == apicid)
- return i;
- }
-
- /* No entries in x86_cpu_to_apicid? Either no MPS|ACPI,
- * or called too early. Either way, we must be CPU 0. */
- if (x86_cpu_to_apicid[0] == BAD_APICID)
- return 0;
-
- return 0; /* Should not happen */
-}
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 3ae9ffd..7b7a687 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -1091,7 +1091,6 @@
/*
* Switch from PIC to APIC mode.
*/
- connect_bsp_APIC();
setup_local_APIC();
if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) {
@@ -1176,12 +1175,9 @@
void __init smp_cpus_done(unsigned int max_cpus)
{
smp_cleanup_boot();
-
-#ifdef CONFIG_X86_IO_APIC
setup_ioapic_dest();
-#endif
-
check_nmi_watchdog();
+ time_init_gtod();
}
#ifdef CONFIG_HOTPLUG_CPU
@@ -1234,6 +1230,8 @@
if (cpu == 0)
return -EBUSY;
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ stop_apic_nmi_watchdog(NULL);
clear_local_APIC();
/*
@@ -1273,11 +1271,11 @@
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
-__init int setup_additional_cpus(char *s)
+static __init int setup_additional_cpus(char *s)
{
- return get_option(&s, &additional_cpus);
+ return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
}
-__setup("additional_cpus=", setup_additional_cpus);
+early_param("additional_cpus", setup_additional_cpus);
#else /* ... !CONFIG_HOTPLUG_CPU */
diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c
index 32cf55e..6026b31 100644
--- a/arch/x86_64/kernel/stacktrace.c
+++ b/arch/x86_64/kernel/stacktrace.c
@@ -7,215 +7,49 @@
*/
#include <linux/sched.h>
#include <linux/stacktrace.h>
+#include <linux/module.h>
+#include <asm/stacktrace.h>
-#include <asm/smp.h>
-
-static inline int
-in_range(unsigned long start, unsigned long addr, unsigned long end)
+static void save_stack_warning(void *data, char *msg)
{
- return addr >= start && addr <= end;
}
-static unsigned long
-get_stack_end(struct task_struct *task, unsigned long stack)
+static void
+save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
{
- unsigned long stack_start, stack_end, flags;
- int i, cpu;
-
- /*
- * The most common case is that we are in the task stack:
- */
- stack_start = (unsigned long)task->thread_info;
- stack_end = stack_start + THREAD_SIZE;
-
- if (in_range(stack_start, stack, stack_end))
- return stack_end;
-
- /*
- * We are in an interrupt if irqstackptr is set:
- */
- raw_local_irq_save(flags);
- cpu = safe_smp_processor_id();
- stack_end = (unsigned long)cpu_pda(cpu)->irqstackptr;
-
- if (stack_end) {
- stack_start = stack_end & ~(IRQSTACKSIZE-1);
- if (in_range(stack_start, stack, stack_end))
- goto out_restore;
- /*
- * We get here if we are in an IRQ context but we
- * are also in an exception stack.
- */
- }
-
- /*
- * Iterate over all exception stacks, and figure out whether
- * 'stack' is in one of them:
- */
- for (i = 0; i < N_EXCEPTION_STACKS; i++) {
- /*
- * set 'end' to the end of the exception stack.
- */
- stack_end = per_cpu(init_tss, cpu).ist[i];
- stack_start = stack_end - EXCEPTION_STKSZ;
-
- /*
- * Is 'stack' above this exception frame's end?
- * If yes then skip to the next frame.
- */
- if (stack >= stack_end)
- continue;
- /*
- * Is 'stack' above this exception frame's start address?
- * If yes then we found the right frame.
- */
- if (stack >= stack_start)
- goto out_restore;
-
- /*
- * If this is a debug stack, and if it has a larger size than
- * the usual exception stacks, then 'stack' might still
- * be within the lower portion of the debug stack:
- */
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
- if (i == DEBUG_STACK - 1 && stack >= stack_end - DEBUG_STKSZ) {
- /*
- * Black magic. A large debug stack is composed of
- * multiple exception stack entries, which we
- * iterate through now. Dont look:
- */
- do {
- stack_end -= EXCEPTION_STKSZ;
- stack_start -= EXCEPTION_STKSZ;
- } while (stack < stack_start);
-
- goto out_restore;
- }
-#endif
- }
- /*
- * Ok, 'stack' is not pointing to any of the system stacks.
- */
- stack_end = 0;
-
-out_restore:
- raw_local_irq_restore(flags);
-
- return stack_end;
}
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer:
- */
-static inline unsigned long
-save_context_stack(struct stack_trace *trace, unsigned int skip,
- unsigned long stack, unsigned long stack_end)
+static int save_stack_stack(void *data, char *name)
{
- unsigned long addr;
-
-#ifdef CONFIG_FRAME_POINTER
- unsigned long prev_stack = 0;
-
- while (in_range(prev_stack, stack, stack_end)) {
- pr_debug("stack: %p\n", (void *)stack);
- addr = (unsigned long)(((unsigned long *)stack)[1]);
- pr_debug("addr: %p\n", (void *)addr);
- if (!skip)
- trace->entries[trace->nr_entries++] = addr-1;
- else
- skip--;
- if (trace->nr_entries >= trace->max_entries)
- break;
- if (!addr)
- return 0;
- /*
- * Stack frames must go forwards (otherwise a loop could
- * happen if the stackframe is corrupted), so we move
- * prev_stack forwards:
- */
- prev_stack = stack;
- stack = (unsigned long)(((unsigned long *)stack)[0]);
- }
- pr_debug("invalid: %p\n", (void *)stack);
-#else
- while (stack < stack_end) {
- addr = ((unsigned long *)stack)[0];
- stack += sizeof(long);
- if (__kernel_text_address(addr)) {
- if (!skip)
- trace->entries[trace->nr_entries++] = addr-1;
- else
- skip--;
- if (trace->nr_entries >= trace->max_entries)
- break;
- }
- }
-#endif
- return stack;
+ struct stack_trace *trace = (struct stack_trace *)data;
+ return trace->all_contexts ? 0 : -1;
}
-#define MAX_STACKS 10
+static void save_stack_address(void *data, unsigned long addr)
+{
+ struct stack_trace *trace = (struct stack_trace *)data;
+ if (trace->skip > 0) {
+ trace->skip--;
+ return;
+ }
+ if (trace->nr_entries < trace->max_entries - 1)
+ trace->entries[trace->nr_entries++] = addr;
+}
+
+static struct stacktrace_ops save_stack_ops = {
+ .warning = save_stack_warning,
+ .warning_symbol = save_stack_warning_symbol,
+ .stack = save_stack_stack,
+ .address = save_stack_address,
+};
/*
* Save stack-backtrace addresses into a stack_trace buffer.
- * If all_contexts is set, all contexts (hardirq, softirq and process)
- * are saved. If not set then only the current context is saved.
*/
-void save_stack_trace(struct stack_trace *trace,
- struct task_struct *task, int all_contexts,
- unsigned int skip)
+void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
{
- unsigned long stack = (unsigned long)&stack;
- int i, nr_stacks = 0, stacks_done[MAX_STACKS];
-
- WARN_ON(trace->nr_entries || !trace->max_entries);
-
- if (!task)
- task = current;
-
- pr_debug("task: %p, ti: %p\n", task, task->thread_info);
-
- if (!task || task == current) {
- /* Grab rbp right from our regs: */
- asm ("mov %%rbp, %0" : "=r" (stack));
- pr_debug("rbp: %p\n", (void *)stack);
- } else {
- /* rbp is the last reg pushed by switch_to(): */
- stack = task->thread.rsp;
- pr_debug("other task rsp: %p\n", (void *)stack);
- stack = (unsigned long)(((unsigned long *)stack)[0]);
- pr_debug("other task rbp: %p\n", (void *)stack);
- }
-
- while (1) {
- unsigned long stack_end = get_stack_end(task, stack);
-
- pr_debug("stack: %p\n", (void *)stack);
- pr_debug("stack end: %p\n", (void *)stack_end);
-
- /*
- * Invalid stack addres?
- */
- if (!stack_end)
- return;
- /*
- * Were we in this stack already? (recursion)
- */
- for (i = 0; i < nr_stacks; i++)
- if (stacks_done[i] == stack_end)
- return;
- stacks_done[nr_stacks] = stack_end;
-
- stack = save_context_stack(trace, skip, stack, stack_end);
- if (!all_contexts || !stack ||
- trace->nr_entries >= trace->max_entries)
- return;
- trace->entries[trace->nr_entries++] = ULONG_MAX;
- if (trace->nr_entries >= trace->max_entries)
- return;
- if (++nr_stacks >= MAX_STACKS)
- return;
- }
+ dump_trace(task, NULL, NULL, &save_stack_ops, trace);
+ trace->entries[trace->nr_entries++] = ULONG_MAX;
}
+EXPORT_SYMBOL(save_stack_trace);
diff --git a/arch/x86_64/kernel/tce.c b/arch/x86_64/kernel/tce.c
index 5530dda..cbabfdf 100644
--- a/arch/x86_64/kernel/tce.c
+++ b/arch/x86_64/kernel/tce.c
@@ -1,4 +1,6 @@
/*
+ * This file manages the translation entries for the IBM Calgary IOMMU.
+ *
* Derived from arch/powerpc/platforms/pseries/iommu.c
*
* Copyright (C) IBM Corporation, 2006
@@ -104,14 +106,6 @@
/* set the tce table size - measured in entries */
tbl->it_size = table_size_to_number_of_entries(specified_table_size);
- tbl->it_base = (unsigned long)tce_table_kva[dev->bus->number];
- if (!tbl->it_base) {
- printk(KERN_ERR "Calgary: iommu_table_setparms: "
- "no table allocated?!\n");
- ret = -ENOMEM;
- goto done;
- }
-
/*
* number of bytes needed for the bitmap size in number of
* entries; we need one bit per entry
@@ -160,8 +154,6 @@
if (ret)
goto free_tbl;
- tce_free(tbl, 0, tbl->it_size);
-
tbl->bbar = bbar;
/*
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 7700e6c..1c255ee 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -24,6 +24,8 @@
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/bcd.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
#include <linux/kallsyms.h>
#include <linux/acpi.h>
#ifdef CONFIG_ACPI
@@ -39,9 +41,7 @@
#include <asm/sections.h>
#include <linux/cpufreq.h>
#include <linux/hpet.h>
-#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/apic.h>
-#endif
#ifdef CONFIG_CPU_FREQ
static void cpufreq_delayed_get(void);
@@ -49,7 +49,7 @@
extern void i8254_timer_resume(void);
extern int using_apic_timer;
-static char *time_init_gtod(void);
+static char *timename = NULL;
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
@@ -187,20 +187,15 @@
{
unsigned long pc = instruction_pointer(regs);
- /* Assume the lock function has either no stack frame or only a single
- word. This checks if the address on the stack looks like a kernel
- text address.
- There is a small window for false hits, but in that case the tick
- is just accounted to the spinlock function.
- Better would be to write these functions in assembler again
- and check exactly. */
+ /* Assume the lock function has either no stack frame or a copy
+ of eflags from PUSHF
+ Eflags always has bits 22 and up cleared unlike kernel addresses. */
if (!user_mode(regs) && in_lock_functions(pc)) {
- char *v = *(char **)regs->rsp;
- if ((v >= _stext && v <= _etext) ||
- (v >= _sinittext && v <= _einittext) ||
- (v >= (char *)MODULES_VADDR && v <= (char *)MODULES_END))
- return (unsigned long)v;
- return ((unsigned long *)regs->rsp)[1];
+ unsigned long *sp = (unsigned long *)regs->rsp;
+ if (sp[0] >> 22)
+ return sp[0];
+ if (sp[1] >> 22)
+ return sp[1];
}
return pc;
}
@@ -281,6 +276,7 @@
* Note: This function is required to return accurate
* time even in the absence of multiple timer ticks.
*/
+static inline unsigned long long cycles_2_ns(unsigned long long cyc);
unsigned long long monotonic_clock(void)
{
unsigned long seq;
@@ -305,8 +301,7 @@
base = monotonic_base;
} while (read_seqretry(&xtime_lock, seq));
this_offset = get_cycles_sync();
- /* FIXME: 1000 or 1000000? */
- offset = (this_offset - last_offset)*1000 / cpu_khz;
+ offset = cycles_2_ns(this_offset - last_offset);
}
return base + offset;
}
@@ -410,8 +405,7 @@
offset %= USEC_PER_TICK;
}
- /* FIXME: 1000 or 1000000? */
- monotonic_base += (tsc - vxtime.last_tsc) * 1000000 / cpu_khz;
+ monotonic_base += cycles_2_ns(tsc - vxtime.last_tsc);
vxtime.last_tsc = tsc - vxtime.quot * delay / vxtime.tsc_quot;
@@ -441,12 +435,8 @@
* have to call the local interrupt handler.
*/
-#ifndef CONFIG_X86_LOCAL_APIC
- profile_tick(CPU_PROFILING, regs);
-#else
if (!using_apic_timer)
smp_local_timer_interrupt(regs);
-#endif
/*
* If we have an externally synchronized Linux clock, then update CMOS clock
@@ -470,10 +460,8 @@
if (apic_runs_main_timer > 1)
return IRQ_HANDLED;
main_timer_handler(regs);
-#ifdef CONFIG_X86_LOCAL_APIC
if (using_apic_timer)
smp_send_timer_broadcast_ipi();
-#endif
return IRQ_HANDLED;
}
@@ -893,11 +881,17 @@
timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL
};
+static int __cpuinit
+time_cpu_notifier(struct notifier_block *nb, unsigned long action, void *hcpu)
+{
+ unsigned cpu = (unsigned long) hcpu;
+ if (action == CPU_ONLINE)
+ vsyscall_set_cpu(cpu);
+ return NOTIFY_DONE;
+}
+
void __init time_init(void)
{
- char *timename;
- char *gtod;
-
if (nohpet)
vxtime.hpet_address = 0;
@@ -931,18 +925,17 @@
}
vxtime.mode = VXTIME_TSC;
- gtod = time_init_gtod();
-
- printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
- vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
- printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
- cpu_khz / 1000, cpu_khz % 1000);
vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz;
vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz;
vxtime.last_tsc = get_cycles_sync();
- setup_irq(0, &irq0);
-
set_cyc2ns_scale(cpu_khz);
+ setup_irq(0, &irq0);
+ hotcpu_notifier(time_cpu_notifier, 0);
+ time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id());
+
+#ifndef CONFIG_SMP
+ time_init_gtod();
+#endif
}
/*
@@ -973,12 +966,18 @@
/*
* Decide what mode gettimeofday should use.
*/
-__init static char *time_init_gtod(void)
+void time_init_gtod(void)
{
char *timetype;
if (unsynchronized_tsc())
notsc = 1;
+
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
+ vgetcpu_mode = VGETCPU_RDTSCP;
+ else
+ vgetcpu_mode = VGETCPU_LSL;
+
if (vxtime.hpet_address && notsc) {
timetype = hpet_use_timer ? "HPET" : "PIT/HPET";
if (hpet_use_timer)
@@ -1001,7 +1000,16 @@
timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}
- return timetype;
+
+ printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
+ vxtime_hz / 1000000, vxtime_hz % 1000000, timename, timetype);
+ printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
+ cpu_khz / 1000, cpu_khz % 1000);
+ vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz;
+ vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz;
+ vxtime.last_tsc = get_cycles_sync();
+
+ set_cyc2ns_scale(cpu_khz);
}
__setup("report_lost_ticks", time_setup);
@@ -1031,8 +1039,16 @@
unsigned long flags;
unsigned long sec;
unsigned long ctime = get_cmos_time();
- unsigned long sleep_length = (ctime - sleep_start) * HZ;
+ long sleep_length = (ctime - sleep_start) * HZ;
+ if (sleep_length < 0) {
+ printk(KERN_WARNING "Time skew detected in timer resume!\n");
+ /* The time after the resume must not be earlier than the time
+ * before the suspend or some nasty things will happen
+ */
+ sleep_length = 0;
+ ctime = sleep_start;
+ }
if (vxtime.hpet_address)
hpet_reenable();
else
diff --git a/arch/x86_64/kernel/trampoline.S b/arch/x86_64/kernel/trampoline.S
index 23a03eb9..c79b99a 100644
--- a/arch/x86_64/kernel/trampoline.S
+++ b/arch/x86_64/kernel/trampoline.S
@@ -64,7 +64,7 @@
.word 0, 0 # idt base = 0L
gdt_48:
- .short __KERNEL32_CS + 7 # gdt limit
+ .short GDT_ENTRIES*8 - 1 # gdt limit
.long cpu_gdt_table-__START_KERNEL_map
.globl trampoline_end
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index b124977..01f2a8d 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -45,6 +45,7 @@
#include <asm/pda.h>
#include <asm/proto.h>
#include <asm/nmi.h>
+#include <asm/stacktrace.h>
asmlinkage void divide_error(void);
asmlinkage void debug(void);
@@ -142,7 +143,7 @@
#endif
static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
- unsigned *usedp, const char **idp)
+ unsigned *usedp, char **idp)
{
static char ids[][8] = {
[DEBUG_STACK - 1] = "#DB",
@@ -161,26 +162,7 @@
* 'stack' is in one of them:
*/
for (k = 0; k < N_EXCEPTION_STACKS; k++) {
- unsigned long end;
-
- /*
- * set 'end' to the end of the exception stack.
- */
- switch (k + 1) {
- /*
- * TODO: this block is not needed i think, because
- * setup64.c:cpu_init() sets up t->ist[DEBUG_STACK]
- * properly too.
- */
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
- case DEBUG_STACK:
- end = cpu_pda(cpu)->debugstack + DEBUG_STKSZ;
- break;
-#endif
- default:
- end = per_cpu(orig_ist, cpu).ist[k];
- break;
- }
+ unsigned long end = per_cpu(orig_ist, cpu).ist[k];
/*
* Is 'stack' above this exception frame's end?
* If yes then skip to the next frame.
@@ -234,13 +216,19 @@
return NULL;
}
-static int show_trace_unwind(struct unwind_frame_info *info, void *context)
+struct ops_and_data {
+ struct stacktrace_ops *ops;
+ void *data;
+};
+
+static int dump_trace_unwind(struct unwind_frame_info *info, void *context)
{
+ struct ops_and_data *oad = (struct ops_and_data *)context;
int n = 0;
while (unwind(info) == 0 && UNW_PC(info)) {
n++;
- printk_address(UNW_PC(info));
+ oad->ops->address(oad->data, UNW_PC(info));
if (arch_unw_user_mode(info))
break;
}
@@ -254,45 +242,53 @@
* severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
*/
-void show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * stack)
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * stack,
+ struct stacktrace_ops *ops, void *data)
{
- const unsigned cpu = safe_smp_processor_id();
+ const unsigned cpu = smp_processor_id();
unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr;
unsigned used = 0;
- printk("\nCall Trace:\n");
-
if (!tsk)
tsk = current;
if (call_trace >= 0) {
int unw_ret = 0;
struct unwind_frame_info info;
+ struct ops_and_data oad = { .ops = ops, .data = data };
if (regs) {
if (unwind_init_frame_info(&info, tsk, regs) == 0)
- unw_ret = show_trace_unwind(&info, NULL);
+ unw_ret = dump_trace_unwind(&info, &oad);
} else if (tsk == current)
- unw_ret = unwind_init_running(&info, show_trace_unwind, NULL);
+ unw_ret = unwind_init_running(&info, dump_trace_unwind, &oad);
else {
if (unwind_init_blocked(&info, tsk) == 0)
- unw_ret = show_trace_unwind(&info, NULL);
+ unw_ret = dump_trace_unwind(&info, &oad);
}
if (unw_ret > 0) {
if (call_trace == 1 && !arch_unw_user_mode(&info)) {
- print_symbol("DWARF2 unwinder stuck at %s\n",
+ ops->warning_symbol(data, "DWARF2 unwinder stuck at %s\n",
UNW_PC(&info));
if ((long)UNW_SP(&info) < 0) {
- printk("Leftover inexact backtrace:\n");
+ ops->warning(data, "Leftover inexact backtrace:\n");
stack = (unsigned long *)UNW_SP(&info);
+ if (!stack)
+ return;
} else
- printk("Full inexact backtrace again:\n");
+ ops->warning(data, "Full inexact backtrace again:\n");
} else if (call_trace >= 1)
return;
else
- printk("Full inexact backtrace again:\n");
+ ops->warning(data, "Full inexact backtrace again:\n");
} else
- printk("Inexact backtrace:\n");
+ ops->warning(data, "Inexact backtrace:\n");
+ }
+ if (!stack) {
+ unsigned long dummy;
+ stack = &dummy;
+ if (tsk && tsk != current)
+ stack = (unsigned long *)tsk->thread.rsp;
}
/*
@@ -303,7 +299,9 @@
#define HANDLE_STACK(cond) \
do while (cond) { \
unsigned long addr = *stack++; \
- if (kernel_text_address(addr)) { \
+ if (oops_in_progress ? \
+ __kernel_text_address(addr) : \
+ kernel_text_address(addr)) { \
/* \
* If the address is either in the text segment of the \
* kernel, or in the region which contains vmalloc'ed \
@@ -312,7 +310,7 @@
* down the cause of the crash will be able to figure \
* out the call path that was taken. \
*/ \
- printk_address(addr); \
+ ops->address(data, addr); \
} \
} while (0)
@@ -321,16 +319,17 @@
* current stack address. If the stacks consist of nested
* exceptions
*/
- for ( ; ; ) {
- const char *id;
+ for (;;) {
+ char *id;
unsigned long *estack_end;
estack_end = in_exception_stack(cpu, (unsigned long)stack,
&used, &id);
if (estack_end) {
- printk(" <%s>", id);
+ if (ops->stack(data, id) < 0)
+ break;
HANDLE_STACK (stack < estack_end);
- printk(" <EOE>");
+ ops->stack(data, "<EOE>");
/*
* We link to the next stack via the
* second-to-last pointer (index -2 to end) in the
@@ -345,7 +344,8 @@
(IRQSTACKSIZE - 64) / sizeof(*irqstack);
if (stack >= irqstack && stack < irqstack_end) {
- printk(" <IRQ>");
+ if (ops->stack(data, "IRQ") < 0)
+ break;
HANDLE_STACK (stack < irqstack_end);
/*
* We link to the next stack (which would be
@@ -354,7 +354,7 @@
*/
stack = (unsigned long *) (irqstack_end[-1]);
irqstack_end = NULL;
- printk(" <EOI>");
+ ops->stack(data, "EOI");
continue;
}
}
@@ -362,19 +362,57 @@
}
/*
- * This prints the process stack:
+ * This handles the process stack:
*/
HANDLE_STACK (((long) stack & (THREAD_SIZE-1)) != 0);
#undef HANDLE_STACK
+}
+EXPORT_SYMBOL(dump_trace);
+static void
+print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+ print_symbol(msg, symbol);
printk("\n");
}
-static void _show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long * rsp)
+static void print_trace_warning(void *data, char *msg)
+{
+ printk("%s\n", msg);
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+ printk(" <%s> ", name);
+ return 0;
+}
+
+static void print_trace_address(void *data, unsigned long addr)
+{
+ printk_address(addr);
+}
+
+static struct stacktrace_ops print_trace_ops = {
+ .warning = print_trace_warning,
+ .warning_symbol = print_trace_warning_symbol,
+ .stack = print_trace_stack,
+ .address = print_trace_address,
+};
+
+void
+show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack)
+{
+ printk("\nCall Trace:\n");
+ dump_trace(tsk, regs, stack, &print_trace_ops, NULL);
+ printk("\n");
+}
+
+static void
+_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *rsp)
{
unsigned long *stack;
int i;
- const int cpu = safe_smp_processor_id();
+ const int cpu = smp_processor_id();
unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr);
unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
@@ -428,7 +466,7 @@
int i;
int in_kernel = !user_mode(regs);
unsigned long rsp;
- const int cpu = safe_smp_processor_id();
+ const int cpu = smp_processor_id();
struct task_struct *cur = cpu_pda(cpu)->pcurrent;
rsp = regs->rsp;
@@ -503,9 +541,11 @@
unsigned __kprobes long oops_begin(void)
{
- int cpu = safe_smp_processor_id();
+ int cpu = smp_processor_id();
unsigned long flags;
+ oops_enter();
+
/* racy, but better than risking deadlock. */
local_irq_save(flags);
if (!spin_trylock(&die_lock)) {
@@ -534,6 +574,7 @@
spin_unlock_irqrestore(&die_lock, flags);
if (panic_on_oops)
panic("Fatal exception");
+ oops_exit();
}
void __kprobes __die(const char * str, struct pt_regs * regs, long err)
@@ -570,7 +611,7 @@
do_exit(SIGSEGV);
}
-void __kprobes die_nmi(char *str, struct pt_regs *regs)
+void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
{
unsigned long flags = oops_begin();
@@ -578,13 +619,12 @@
* We are in trouble anyway, lets at least try
* to get a message out.
*/
- printk(str, safe_smp_processor_id());
+ printk(str, smp_processor_id());
show_registers(regs);
if (kexec_should_crash(current))
crash_kexec(regs);
- if (panic_on_timeout || panic_on_oops)
- panic("nmi watchdog");
- printk("console shuts up ...\n");
+ if (do_panic || panic_on_oops)
+ panic("Non maskable interrupt");
oops_end(flags);
nmi_exit();
local_irq_enable();
@@ -730,8 +770,15 @@
static __kprobes void
mem_parity_error(unsigned char reason, struct pt_regs * regs)
{
- printk("Uhhuh. NMI received. Dazed and confused, but trying to continue\n");
- printk("You probably have a hardware problem with your RAM chips\n");
+ printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
+ reason);
+ printk(KERN_EMERG "You probably have a hardware problem with your "
+ "RAM chips\n");
+
+ if (panic_on_unrecovered_nmi)
+ panic("NMI: Not continuing");
+
+ printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
/* Clear and disable the memory parity error line. */
reason = (reason & 0xf) | 4;
@@ -754,9 +801,15 @@
static __kprobes void
unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
-{ printk("Uhhuh. NMI received for unknown reason %02x.\n", reason);
- printk("Dazed and confused, but trying to continue\n");
- printk("Do you have a strange power saving mode enabled?\n");
+{
+ printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
+ reason);
+ printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
+
+ if (panic_on_unrecovered_nmi)
+ panic("NMI: Not continuing");
+
+ printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
}
/* Runs on IST stack. This code must keep interrupts off all the time.
@@ -776,17 +829,15 @@
if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
== NOTIFY_STOP)
return;
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* Ok, so this is none of the documented NMI sources,
* so it must be the NMI watchdog.
*/
- if (nmi_watchdog > 0) {
- nmi_watchdog_tick(regs,reason);
+ if (nmi_watchdog_tick(regs,reason))
return;
- }
-#endif
- unknown_nmi_error(reason, regs);
+ if (!do_nmi_callback(regs,cpu))
+ unknown_nmi_error(reason, regs);
+
return;
}
if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
@@ -1071,6 +1122,7 @@
init_fpu(me);
restore_fpu_checking(&me->thread.i387.fxsave);
task_thread_info(me)->status |= TS_USEDFPU;
+ me->fpu_counter++;
}
void __init trap_init(void)
@@ -1109,24 +1161,30 @@
}
-/* Actual parsing is done early in setup.c. */
-static int __init oops_dummy(char *s)
+static int __init oops_setup(char *s)
{
- panic_on_oops = 1;
- return 1;
+ if (!s)
+ return -EINVAL;
+ if (!strcmp(s, "panic"))
+ panic_on_oops = 1;
+ return 0;
}
-__setup("oops=", oops_dummy);
+early_param("oops", oops_setup);
static int __init kstack_setup(char *s)
{
+ if (!s)
+ return -EINVAL;
kstack_depth_to_print = simple_strtoul(s,NULL,0);
- return 1;
+ return 0;
}
-__setup("kstack=", kstack_setup);
+early_param("kstack", kstack_setup);
#ifdef CONFIG_STACK_UNWIND
static int __init call_trace_setup(char *s)
{
+ if (!s)
+ return -EINVAL;
if (strcmp(s, "old") == 0)
call_trace = -1;
else if (strcmp(s, "both") == 0)
@@ -1135,7 +1193,7 @@
call_trace = 1;
else if (strcmp(s, "new") == 0)
call_trace = 2;
- return 1;
+ return 0;
}
-__setup("call_trace=", call_trace_setup);
+early_param("call_trace", call_trace_setup);
#endif
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
index 7c4de31..d0564f1 100644
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ b/arch/x86_64/kernel/vmlinux.lds.S
@@ -13,6 +13,12 @@
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
jiffies_64 = jiffies;
+PHDRS {
+ text PT_LOAD FLAGS(5); /* R_E */
+ data PT_LOAD FLAGS(7); /* RWE */
+ user PT_LOAD FLAGS(7); /* RWE */
+ note PT_NOTE FLAGS(4); /* R__ */
+}
SECTIONS
{
. = __START_KERNEL;
@@ -31,7 +37,7 @@
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
- } = 0x9090
+ } :text = 0x9090
/* out-of-line lock text */
.text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) }
@@ -57,7 +63,7 @@
.data : AT(ADDR(.data) - LOAD_OFFSET) {
*(.data)
CONSTRUCTORS
- }
+ } :data
_edata = .; /* End of data section */
@@ -89,7 +95,7 @@
#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
. = VSYSCALL_ADDR;
- .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) }
+ .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user
__vsyscall_0 = VSYSCALL_VIRT_ADDR;
. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
@@ -99,6 +105,9 @@
.vxtime : AT(VLOAD(.vxtime)) { *(.vxtime) }
vxtime = VVIRT(.vxtime);
+ .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
+ vgetcpu_mode = VVIRT(.vgetcpu_mode);
+
.wall_jiffies : AT(VLOAD(.wall_jiffies)) { *(.wall_jiffies) }
wall_jiffies = VVIRT(.wall_jiffies);
@@ -132,7 +141,7 @@
. = ALIGN(8192); /* init_task */
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
- }
+ } :data
. = ALIGN(4096);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
@@ -207,14 +216,12 @@
__initramfs_start = .;
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) }
__initramfs_end = .;
- /* temporary here to work around NR_CPUS. If you see this comment in 2.6.17+
- complain */
- . = ALIGN(4096);
- __init_end = .;
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
__per_cpu_start = .;
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) }
__per_cpu_end = .;
+ . = ALIGN(4096);
+ __init_end = .;
. = ALIGN(4096);
__nosave_begin = .;
diff --git a/arch/x86_64/kernel/vsmp.c b/arch/x86_64/kernel/vsmp.c
index 92f70c7..044e852 100644
--- a/arch/x86_64/kernel/vsmp.c
+++ b/arch/x86_64/kernel/vsmp.c
@@ -20,6 +20,9 @@
void *address;
unsigned int cap, ctl;
+ if (!early_pci_allowed())
+ return 0;
+
/* Check if we are running on a ScaleMP vSMP box */
if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) != PCI_VENDOR_ID_SCALEMP) ||
(read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) != PCI_DEVICE_ID_SCALEMP_VSMP_CTL))
diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c
index f603037..ac48c38 100644
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -26,6 +26,7 @@
#include <linux/seqlock.h>
#include <linux/jiffies.h>
#include <linux/sysctl.h>
+#include <linux/getcpu.h>
#include <asm/vsyscall.h>
#include <asm/pgtable.h>
@@ -33,11 +34,15 @@
#include <asm/fixmap.h>
#include <asm/errno.h>
#include <asm/io.h>
+#include <asm/segment.h>
+#include <asm/desc.h>
+#include <asm/topology.h>
#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr)))
int __sysctl_vsyscall __section_sysctl_vsyscall = 1;
seqlock_t __xtime_lock __section_xtime_lock = SEQLOCK_UNLOCKED;
+int __vgetcpu_mode __section_vgetcpu_mode;
#include <asm/unistd.h>
@@ -72,7 +77,8 @@
__vxtime.tsc_quot) >> 32;
/* See comment in x86_64 do_gettimeofday. */
} else {
- usec += ((readl((void *)fix_to_virt(VSYSCALL_HPET) + 0xf0) -
+ usec += ((readl((void __iomem *)
+ fix_to_virt(VSYSCALL_HPET) + 0xf0) -
__vxtime.last) * __vxtime.quot) >> 32;
}
} while (read_seqretry(&__xtime_lock, sequence));
@@ -127,9 +133,46 @@
return __xtime.tv_sec;
}
-long __vsyscall(2) venosys_0(void)
+/* Fast way to get current CPU and node.
+ This helps to do per node and per CPU caches in user space.
+ The result is not guaranteed without CPU affinity, but usually
+ works out because the scheduler tries to keep a thread on the same
+ CPU.
+
+ tcache must point to a two element sized long array.
+ All arguments can be NULL. */
+long __vsyscall(2)
+vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache)
{
- return -ENOSYS;
+ unsigned int dummy, p;
+ unsigned long j = 0;
+
+ /* Fast cache - only recompute value once per jiffies and avoid
+ relatively costly rdtscp/cpuid otherwise.
+ This works because the scheduler usually keeps the process
+ on the same CPU and this syscall doesn't guarantee its
+ results anyways.
+ We do this here because otherwise user space would do it on
+ its own in a likely inferior way (no access to jiffies).
+ If you don't like it pass NULL. */
+ if (tcache && tcache->t0 == (j = __jiffies)) {
+ p = tcache->t1;
+ } else if (__vgetcpu_mode == VGETCPU_RDTSCP) {
+ /* Load per CPU data from RDTSCP */
+ rdtscp(dummy, dummy, p);
+ } else {
+ /* Load per CPU data from GDT */
+ asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
+ }
+ if (tcache) {
+ tcache->t0 = j;
+ tcache->t1 = p;
+ }
+ if (cpu)
+ *cpu = p & 0xfff;
+ if (node)
+ *node = p >> 12;
+ return 0;
}
long __vsyscall(3) venosys_1(void)
@@ -149,7 +192,8 @@
void __user *buffer, size_t *lenp, loff_t *ppos)
{
extern u16 vsysc1, vsysc2;
- u16 *map1, *map2;
+ u16 __iomem *map1;
+ u16 __iomem *map2;
int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
if (!write)
return ret;
@@ -164,11 +208,11 @@
goto out;
}
if (!sysctl_vsyscall) {
- *map1 = SYSCALL;
- *map2 = SYSCALL;
+ writew(SYSCALL, map1);
+ writew(SYSCALL, map2);
} else {
- *map1 = NOP2;
- *map2 = NOP2;
+ writew(NOP2, map1);
+ writew(NOP2, map2);
}
iounmap(map2);
out:
@@ -200,6 +244,43 @@
#endif
+static void __cpuinit write_rdtscp_cb(void *info)
+{
+ write_rdtscp_aux((unsigned long)info);
+}
+
+void __cpuinit vsyscall_set_cpu(int cpu)
+{
+ unsigned long *d;
+ unsigned long node = 0;
+#ifdef CONFIG_NUMA
+ node = cpu_to_node[cpu];
+#endif
+ if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) {
+ void *info = (void *)((node << 12) | cpu);
+ /* Can happen on preemptive kernel */
+ if (get_cpu() == cpu)
+ write_rdtscp_cb(info);
+#ifdef CONFIG_SMP
+ else {
+ /* the notifier is unfortunately not executed on the
+ target CPU */
+ smp_call_function_single(cpu,write_rdtscp_cb,info,0,1);
+ }
+#endif
+ put_cpu();
+ }
+
+ /* Store cpu number in limit so that it can be loaded quickly
+ in user space in vgetcpu.
+ 12 bits for the CPU and 8 bits for the node. */
+ d = (unsigned long *)(cpu_gdt(cpu) + GDT_ENTRY_PER_CPU);
+ *d = 0x0f40000000000ULL;
+ *d |= cpu;
+ *d |= (node & 0xf) << 12;
+ *d |= (node >> 4) << 48;
+}
+
static void __init map_vsyscall(void)
{
extern char __vsyscall_0;
@@ -214,6 +295,7 @@
VSYSCALL_ADDR(__NR_vgettimeofday)));
BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime));
BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)));
+ BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu));
map_vsyscall();
#ifdef CONFIG_SYSCTL
register_sysctl_table(kernel_root_table2, 0);
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index 370952c..c3454af 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -29,6 +29,7 @@
EXPORT_SYMBOL(copy_user_generic);
EXPORT_SYMBOL(copy_from_user);
EXPORT_SYMBOL(copy_to_user);
+EXPORT_SYMBOL(__copy_from_user_inatomic);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile
index ccef6ae..b78d417 100644
--- a/arch/x86_64/lib/Makefile
+++ b/arch/x86_64/lib/Makefile
@@ -9,4 +9,4 @@
lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
usercopy.o getuser.o putuser.o \
thunk.o clear_page.o copy_page.o bitstr.o bitops.o
-lib-y += memcpy.o memmove.o memset.o copy_user.o
+lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o
diff --git a/arch/x86_64/lib/clear_page.S b/arch/x86_64/lib/clear_page.S
index 1f81b79..9a10a78 100644
--- a/arch/x86_64/lib/clear_page.S
+++ b/arch/x86_64/lib/clear_page.S
@@ -1,10 +1,22 @@
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
/*
* Zero a page.
* rdi page
*/
- .globl clear_page
- .p2align 4
-clear_page:
+ ALIGN
+clear_page_c:
+ CFI_STARTPROC
+ movl $4096/8,%ecx
+ xorl %eax,%eax
+ rep stosq
+ ret
+ CFI_ENDPROC
+ENDPROC(clear_page)
+
+ENTRY(clear_page)
+ CFI_STARTPROC
xorl %eax,%eax
movl $4096/64,%ecx
.p2align 4
@@ -23,28 +35,25 @@
jnz .Lloop
nop
ret
-clear_page_end:
+ CFI_ENDPROC
+.Lclear_page_end:
+ENDPROC(clear_page)
/* Some CPUs run faster using the string instructions.
It is also a lot simpler. Use this when possible */
#include <asm/cpufeature.h>
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (clear_page_c - clear_page) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad clear_page
- .quad clear_page_c
- .byte X86_FEATURE_REP_GOOD
- .byte clear_page_end-clear_page
- .byte clear_page_c_end-clear_page_c
- .previous
-
- .section .altinstr_replacement,"ax"
-clear_page_c:
- movl $4096/8,%ecx
- xorl %eax,%eax
- rep
- stosq
- ret
-clear_page_c_end:
+ .quad clear_page
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lclear_page_end - clear_page
+ .byte 2b - 1b
.previous
diff --git a/arch/x86_64/lib/copy_page.S b/arch/x86_64/lib/copy_page.S
index 8fa19d9..0ebb03b 100644
--- a/arch/x86_64/lib/copy_page.S
+++ b/arch/x86_64/lib/copy_page.S
@@ -1,17 +1,33 @@
/* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
+ ALIGN
+copy_page_c:
+ CFI_STARTPROC
+ movl $4096/8,%ecx
+ rep movsq
+ ret
+ CFI_ENDPROC
+ENDPROC(copy_page_c)
+
/* Don't use streaming store because it's better when the target
ends up in cache. */
/* Could vary the prefetch distance based on SMP/UP */
- .globl copy_page
- .p2align 4
-copy_page:
+ENTRY(copy_page)
+ CFI_STARTPROC
subq $3*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 3*8
movq %rbx,(%rsp)
+ CFI_REL_OFFSET rbx, 0
movq %r12,1*8(%rsp)
+ CFI_REL_OFFSET r12, 1*8
movq %r13,2*8(%rsp)
+ CFI_REL_OFFSET r13, 2*8
movl $(4096/64)-5,%ecx
.p2align 4
@@ -72,30 +88,33 @@
jnz .Loop2
movq (%rsp),%rbx
+ CFI_RESTORE rbx
movq 1*8(%rsp),%r12
+ CFI_RESTORE r12
movq 2*8(%rsp),%r13
+ CFI_RESTORE r13
addq $3*8,%rsp
+ CFI_ADJUST_CFA_OFFSET -3*8
ret
+.Lcopy_page_end:
+ CFI_ENDPROC
+ENDPROC(copy_page)
/* Some CPUs run faster using the string copy instructions.
It is also a lot simpler. Use this when possible */
#include <asm/cpufeature.h>
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (copy_page_c - copy_page) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad copy_page
- .quad copy_page_c
- .byte X86_FEATURE_REP_GOOD
- .byte copy_page_c_end-copy_page_c
- .byte copy_page_c_end-copy_page_c
- .previous
-
- .section .altinstr_replacement,"ax"
-copy_page_c:
- movl $4096/8,%ecx
- rep
- movsq
- ret
-copy_page_c_end:
+ .quad copy_page
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lcopy_page_end - copy_page
+ .byte 2b - 1b
.previous
diff --git a/arch/x86_64/lib/copy_user.S b/arch/x86_64/lib/copy_user.S
index f64569b..70bebd3 100644
--- a/arch/x86_64/lib/copy_user.S
+++ b/arch/x86_64/lib/copy_user.S
@@ -4,56 +4,78 @@
* Functions to copy from and to user space.
*/
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
#define FIX_ALIGNMENT 1
- #include <asm/current.h>
- #include <asm/asm-offsets.h>
- #include <asm/thread_info.h>
- #include <asm/cpufeature.h>
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/cpufeature.h>
+
+ .macro ALTERNATIVE_JUMP feature,orig,alt
+0:
+ .byte 0xe9 /* 32bit jump */
+ .long \orig-1f /* by default jump to orig */
+1:
+ .section .altinstr_replacement,"ax"
+2: .byte 0xe9 /* near jump with 32bit immediate */
+ .long \alt-1b /* offset */ /* or alternatively to alt */
+ .previous
+ .section .altinstructions,"a"
+ .align 8
+ .quad 0b
+ .quad 2b
+ .byte \feature /* when feature is set */
+ .byte 5
+ .byte 5
+ .previous
+ .endm
/* Standard copy_to_user with segment limit checking */
- .globl copy_to_user
- .p2align 4
-copy_to_user:
+ENTRY(copy_to_user)
+ CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rdi,%rcx
addq %rdx,%rcx
jc bad_to_user
cmpq threadinfo_addr_limit(%rax),%rcx
jae bad_to_user
-2:
- .byte 0xe9 /* 32bit jump */
- .long .Lcug-1f
-1:
+ xorl %eax,%eax /* clear zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
- .section .altinstr_replacement,"ax"
-3: .byte 0xe9 /* replacement jmp with 8 bit immediate */
- .long copy_user_generic_c-1b /* offset */
- .previous
- .section .altinstructions,"a"
- .align 8
- .quad 2b
- .quad 3b
- .byte X86_FEATURE_REP_GOOD
- .byte 5
- .byte 5
- .previous
+ENTRY(copy_user_generic)
+ CFI_STARTPROC
+ movl $1,%ecx /* set zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
+
+ENTRY(__copy_from_user_inatomic)
+ CFI_STARTPROC
+ xorl %ecx,%ecx /* clear zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
/* Standard copy_from_user with segment limit checking */
- .globl copy_from_user
- .p2align 4
-copy_from_user:
+ENTRY(copy_from_user)
+ CFI_STARTPROC
GET_THREAD_INFO(%rax)
movq %rsi,%rcx
addq %rdx,%rcx
jc bad_from_user
cmpq threadinfo_addr_limit(%rax),%rcx
jae bad_from_user
- /* FALL THROUGH to copy_user_generic */
+ movl $1,%ecx /* set zero flag */
+ ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
+ CFI_ENDPROC
+ENDPROC(copy_from_user)
.section .fixup,"ax"
/* must zero dest */
bad_from_user:
+ CFI_STARTPROC
movl %edx,%ecx
xorl %eax,%eax
rep
@@ -61,40 +83,32 @@
bad_to_user:
movl %edx,%eax
ret
+ CFI_ENDPROC
+END(bad_from_user)
.previous
/*
- * copy_user_generic - memory copy with exception handling.
+ * copy_user_generic_unrolled - memory copy with exception handling.
+ * This version is for CPUs like P4 that don't have efficient micro code for rep movsq
*
* Input:
* rdi destination
* rsi source
* rdx count
+ * ecx zero flag -- if true zero destination on error
*
* Output:
* eax uncopied bytes or 0 if successful.
*/
- .globl copy_user_generic
- .p2align 4
-copy_user_generic:
- .byte 0x66,0x66,0x90 /* 5 byte nop for replacement jump */
- .byte 0x66,0x90
-1:
- .section .altinstr_replacement,"ax"
-2: .byte 0xe9 /* near jump with 32bit immediate */
- .long copy_user_generic_c-1b /* offset */
- .previous
- .section .altinstructions,"a"
- .align 8
- .quad copy_user_generic
- .quad 2b
- .byte X86_FEATURE_REP_GOOD
- .byte 5
- .byte 5
- .previous
-.Lcug:
+ENTRY(copy_user_generic_unrolled)
+ CFI_STARTPROC
pushq %rbx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbx, 0
+ pushq %rcx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rcx, 0
xorl %eax,%eax /*zero for the exception handler */
#ifdef FIX_ALIGNMENT
@@ -168,9 +182,16 @@
decl %ecx
jnz .Lloop_1
+ CFI_REMEMBER_STATE
.Lende:
+ popq %rcx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rcx
popq %rbx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rbx
ret
+ CFI_RESTORE_STATE
#ifdef FIX_ALIGNMENT
/* align destination */
@@ -252,6 +273,8 @@
addl %ecx,%edx
/* edx: bytes to zero, rdi: dest, eax:zero */
.Lzero_rest:
+ cmpl $0,(%rsp)
+ jz .Le_zero
movq %rdx,%rcx
.Le_byte:
xorl %eax,%eax
@@ -261,6 +284,9 @@
.Le_zero:
movq %rdx,%rax
jmp .Lende
+ CFI_ENDPROC
+ENDPROC(copy_user_generic)
+
/* Some CPUs run faster using the string copy instructions.
This is also a lot simpler. Use them when possible.
@@ -270,6 +296,7 @@
/* rdi destination
* rsi source
* rdx count
+ * ecx zero flag
*
* Output:
* eax uncopied bytes or 0 if successfull.
@@ -280,22 +307,48 @@
* And more would be dangerous because both Intel and AMD have
* errata with rep movsq > 4GB. If someone feels the need to fix
* this please consider this.
- */
-copy_user_generic_c:
+ */
+ENTRY(copy_user_generic_string)
+ CFI_STARTPROC
+ movl %ecx,%r8d /* save zero flag */
movl %edx,%ecx
shrl $3,%ecx
andl $7,%edx
+ jz 10f
1: rep
movsq
movl %edx,%ecx
2: rep
movsb
-4: movl %ecx,%eax
+9: movl %ecx,%eax
ret
-3: lea (%rdx,%rcx,8),%rax
+
+ /* multiple of 8 byte */
+10: rep
+ movsq
+ xor %eax,%eax
ret
+ /* exception handling */
+3: lea (%rdx,%rcx,8),%rax /* exception on quad loop */
+ jmp 6f
+5: movl %ecx,%eax /* exception on byte loop */
+ /* eax: left over bytes */
+6: testl %r8d,%r8d /* zero flag set? */
+ jz 7f
+ movl %eax,%ecx /* initialize x86 loop counter */
+ push %rax
+ xorl %eax,%eax
+8: rep
+ stosb /* zero the rest */
+11: pop %rax
+7: ret
+ CFI_ENDPROC
+END(copy_user_generic_c)
+
.section __ex_table,"a"
.quad 1b,3b
- .quad 2b,4b
+ .quad 2b,5b
+ .quad 8b,11b
+ .quad 10b,3b
.previous
diff --git a/arch/x86_64/lib/csum-copy.S b/arch/x86_64/lib/csum-copy.S
index 72fd55e..f0dba36 100644
--- a/arch/x86_64/lib/csum-copy.S
+++ b/arch/x86_64/lib/csum-copy.S
@@ -5,8 +5,9 @@
* License. See the file COPYING in the main directory of this archive
* for more details. No warranty for anything given at all.
*/
- #include <linux/linkage.h>
- #include <asm/errno.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/errno.h>
/*
* Checksum copy with exception handling.
@@ -53,19 +54,24 @@
.endm
- .globl csum_partial_copy_generic
- .p2align 4
-csum_partial_copy_generic:
+ENTRY(csum_partial_copy_generic)
+ CFI_STARTPROC
cmpl $3*64,%edx
jle .Lignore
.Lignore:
subq $7*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 7*8
movq %rbx,2*8(%rsp)
+ CFI_REL_OFFSET rbx, 2*8
movq %r12,3*8(%rsp)
+ CFI_REL_OFFSET r12, 3*8
movq %r14,4*8(%rsp)
+ CFI_REL_OFFSET r14, 4*8
movq %r13,5*8(%rsp)
+ CFI_REL_OFFSET r13, 5*8
movq %rbp,6*8(%rsp)
+ CFI_REL_OFFSET rbp, 6*8
movq %r8,(%rsp)
movq %r9,1*8(%rsp)
@@ -208,14 +214,22 @@
addl %ebx,%eax
adcl %r9d,%eax /* carry */
+ CFI_REMEMBER_STATE
.Lende:
movq 2*8(%rsp),%rbx
+ CFI_RESTORE rbx
movq 3*8(%rsp),%r12
+ CFI_RESTORE r12
movq 4*8(%rsp),%r14
+ CFI_RESTORE r14
movq 5*8(%rsp),%r13
+ CFI_RESTORE r13
movq 6*8(%rsp),%rbp
+ CFI_RESTORE rbp
addq $7*8,%rsp
+ CFI_ADJUST_CFA_OFFSET -7*8
ret
+ CFI_RESTORE_STATE
/* Exception handlers. Very simple, zeroing is done in the wrappers */
.Lbad_source:
@@ -231,3 +245,5 @@
jz .Lende
movl $-EFAULT,(%rax)
jmp .Lende
+ CFI_ENDPROC
+ENDPROC(csum_partial_copy_generic)
diff --git a/arch/x86_64/lib/getuser.S b/arch/x86_64/lib/getuser.S
index 3844d5e..5448876 100644
--- a/arch/x86_64/lib/getuser.S
+++ b/arch/x86_64/lib/getuser.S
@@ -27,25 +27,26 @@
*/
#include <linux/linkage.h>
+#include <asm/dwarf2.h>
#include <asm/page.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
.text
- .p2align 4
-.globl __get_user_1
-__get_user_1:
+ENTRY(__get_user_1)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
cmpq threadinfo_addr_limit(%r8),%rcx
jae bad_get_user
1: movzb (%rcx),%edx
xorl %eax,%eax
ret
+ CFI_ENDPROC
+ENDPROC(__get_user_1)
- .p2align 4
-.globl __get_user_2
-__get_user_2:
+ENTRY(__get_user_2)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $1,%rcx
jc 20f
@@ -57,10 +58,11 @@
ret
20: decq %rcx
jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_2)
- .p2align 4
-.globl __get_user_4
-__get_user_4:
+ENTRY(__get_user_4)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $3,%rcx
jc 30f
@@ -72,10 +74,11 @@
ret
30: subq $3,%rcx
jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_4)
- .p2align 4
-.globl __get_user_8
-__get_user_8:
+ENTRY(__get_user_8)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $7,%rcx
jc 40f
@@ -87,11 +90,16 @@
ret
40: subq $7,%rcx
jmp bad_get_user
+ CFI_ENDPROC
+ENDPROC(__get_user_8)
bad_get_user:
+ CFI_STARTPROC
xorl %edx,%edx
movq $(-EFAULT),%rax
ret
+ CFI_ENDPROC
+END(bad_get_user)
.section __ex_table,"a"
.quad 1b,bad_get_user
diff --git a/arch/x86_64/lib/iomap_copy.S b/arch/x86_64/lib/iomap_copy.S
index 8bbade5..05a95e7 100644
--- a/arch/x86_64/lib/iomap_copy.S
+++ b/arch/x86_64/lib/iomap_copy.S
@@ -15,12 +15,16 @@
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
/*
* override generic version in lib/iomap_copy.c
*/
- .globl __iowrite32_copy
- .p2align 4
-__iowrite32_copy:
+ENTRY(__iowrite32_copy)
+ CFI_STARTPROC
movl %edx,%ecx
rep movsd
ret
+ CFI_ENDPROC
+ENDPROC(__iowrite32_copy)
diff --git a/arch/x86_64/lib/memcpy.S b/arch/x86_64/lib/memcpy.S
index 5554948..967b22f 100644
--- a/arch/x86_64/lib/memcpy.S
+++ b/arch/x86_64/lib/memcpy.S
@@ -1,6 +1,10 @@
/* Copyright 2002 Andi Kleen */
- #include <asm/cpufeature.h>
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+#include <asm/cpufeature.h>
+
/*
* memcpy - Copy a memory block.
*
@@ -13,12 +17,26 @@
* rax original destination
*/
- .globl __memcpy
- .globl memcpy
- .p2align 4
-__memcpy:
-memcpy:
+ ALIGN
+memcpy_c:
+ CFI_STARTPROC
+ movq %rdi,%rax
+ movl %edx,%ecx
+ shrl $3,%ecx
+ andl $7,%edx
+ rep movsq
+ movl %edx,%ecx
+ rep movsb
+ ret
+ CFI_ENDPROC
+ENDPROC(memcpy_c)
+
+ENTRY(__memcpy)
+ENTRY(memcpy)
+ CFI_STARTPROC
pushq %rbx
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbx, 0
movq %rdi,%rax
movl %edx,%ecx
@@ -86,36 +104,27 @@
.Lende:
popq %rbx
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_RESTORE rbx
ret
.Lfinal:
+ CFI_ENDPROC
+ENDPROC(memcpy)
+ENDPROC(__memcpy)
/* Some CPUs run faster using the string copy instructions.
It is also a lot simpler. Use this when possible */
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad memcpy
- .quad memcpy_c
- .byte X86_FEATURE_REP_GOOD
- .byte .Lfinal-memcpy
- .byte memcpy_c_end-memcpy_c
- .previous
-
- .section .altinstr_replacement,"ax"
- /* rdi destination
- * rsi source
- * rdx count
- */
-memcpy_c:
- movq %rdi,%rax
- movl %edx,%ecx
- shrl $3,%ecx
- andl $7,%edx
- rep
- movsq
- movl %edx,%ecx
- rep
- movsb
- ret
-memcpy_c_end:
+ .quad memcpy
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lfinal - memcpy
+ .byte 2b - 1b
.previous
diff --git a/arch/x86_64/lib/memset.S b/arch/x86_64/lib/memset.S
index ad397f2..09ed1f6 100644
--- a/arch/x86_64/lib/memset.S
+++ b/arch/x86_64/lib/memset.S
@@ -1,4 +1,9 @@
/* Copyright 2002 Andi Kleen, SuSE Labs */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/dwarf2.h>
+
/*
* ISO C memset - set a memory block to a byte value.
*
@@ -8,11 +13,29 @@
*
* rax original destination
*/
- .globl __memset
- .globl memset
- .p2align 4
-memset:
-__memset:
+ ALIGN
+memset_c:
+ CFI_STARTPROC
+ movq %rdi,%r9
+ movl %edx,%r8d
+ andl $7,%r8d
+ movl %edx,%ecx
+ shrl $3,%ecx
+ /* expand byte value */
+ movzbl %sil,%esi
+ movabs $0x0101010101010101,%rax
+ mulq %rsi /* with rax, clobbers rdx */
+ rep stosq
+ movl %r8d,%ecx
+ rep stosb
+ movq %r9,%rax
+ ret
+ CFI_ENDPROC
+ENDPROC(memset_c)
+
+ENTRY(memset)
+ENTRY(__memset)
+ CFI_STARTPROC
movq %rdi,%r10
movq %rdx,%r11
@@ -25,6 +48,7 @@
movl %edi,%r9d
andl $7,%r9d
jnz .Lbad_alignment
+ CFI_REMEMBER_STATE
.Lafter_bad_alignment:
movl %r11d,%ecx
@@ -75,6 +99,7 @@
movq %r10,%rax
ret
+ CFI_RESTORE_STATE
.Lbad_alignment:
cmpq $7,%r11
jbe .Lhandle_7
@@ -84,42 +109,26 @@
addq %r8,%rdi
subq %r8,%r11
jmp .Lafter_bad_alignment
+.Lfinal:
+ CFI_ENDPROC
+ENDPROC(memset)
+ENDPROC(__memset)
/* Some CPUs run faster using the string instructions.
It is also a lot simpler. Use this when possible */
#include <asm/cpufeature.h>
+ .section .altinstr_replacement,"ax"
+1: .byte 0xeb /* jmp <disp8> */
+ .byte (memset_c - memset) - (2f - 1b) /* offset */
+2:
+ .previous
.section .altinstructions,"a"
.align 8
- .quad memset
- .quad memset_c
- .byte X86_FEATURE_REP_GOOD
- .byte memset_c_end-memset_c
- .byte memset_c_end-memset_c
- .previous
-
- .section .altinstr_replacement,"ax"
- /* rdi destination
- * rsi value
- * rdx count
- */
-memset_c:
- movq %rdi,%r9
- movl %edx,%r8d
- andl $7,%r8d
- movl %edx,%ecx
- shrl $3,%ecx
- /* expand byte value */
- movzbl %sil,%esi
- movabs $0x0101010101010101,%rax
- mulq %rsi /* with rax, clobbers rdx */
- rep
- stosq
- movl %r8d,%ecx
- rep
- stosb
- movq %r9,%rax
- ret
-memset_c_end:
+ .quad memset
+ .quad 1b
+ .byte X86_FEATURE_REP_GOOD
+ .byte .Lfinal - memset
+ .byte 2b - 1b
.previous
diff --git a/arch/x86_64/lib/putuser.S b/arch/x86_64/lib/putuser.S
index 7f55939..4989f5a 100644
--- a/arch/x86_64/lib/putuser.S
+++ b/arch/x86_64/lib/putuser.S
@@ -25,25 +25,26 @@
*/
#include <linux/linkage.h>
+#include <asm/dwarf2.h>
#include <asm/page.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
.text
- .p2align 4
-.globl __put_user_1
-__put_user_1:
+ENTRY(__put_user_1)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
cmpq threadinfo_addr_limit(%r8),%rcx
jae bad_put_user
1: movb %dl,(%rcx)
xorl %eax,%eax
ret
+ CFI_ENDPROC
+ENDPROC(__put_user_1)
- .p2align 4
-.globl __put_user_2
-__put_user_2:
+ENTRY(__put_user_2)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $1,%rcx
jc 20f
@@ -55,10 +56,11 @@
ret
20: decq %rcx
jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_2)
- .p2align 4
-.globl __put_user_4
-__put_user_4:
+ENTRY(__put_user_4)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $3,%rcx
jc 30f
@@ -70,10 +72,11 @@
ret
30: subq $3,%rcx
jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_4)
- .p2align 4
-.globl __put_user_8
-__put_user_8:
+ENTRY(__put_user_8)
+ CFI_STARTPROC
GET_THREAD_INFO(%r8)
addq $7,%rcx
jc 40f
@@ -85,10 +88,15 @@
ret
40: subq $7,%rcx
jmp bad_put_user
+ CFI_ENDPROC
+ENDPROC(__put_user_8)
bad_put_user:
+ CFI_STARTPROC
movq $(-EFAULT),%rax
ret
+ CFI_ENDPROC
+END(bad_put_user)
.section __ex_table,"a"
.quad 1b,bad_put_user
diff --git a/arch/x86_64/lib/rwlock.S b/arch/x86_64/lib/rwlock.S
new file mode 100644
index 0000000..0cde1f8
--- /dev/null
+++ b/arch/x86_64/lib/rwlock.S
@@ -0,0 +1,38 @@
+/* Slow paths of read/write spinlocks. */
+
+#include <linux/linkage.h>
+#include <asm/rwlock.h>
+#include <asm/alternative-asm.i>
+#include <asm/dwarf2.h>
+
+/* rdi: pointer to rwlock_t */
+ENTRY(__write_lock_failed)
+ CFI_STARTPROC
+ LOCK_PREFIX
+ addl $RW_LOCK_BIAS,(%rdi)
+1: rep
+ nop
+ cmpl $RW_LOCK_BIAS,(%rdi)
+ jne 1b
+ LOCK_PREFIX
+ subl $RW_LOCK_BIAS,(%rdi)
+ jnz __write_lock_failed
+ ret
+ CFI_ENDPROC
+END(__write_lock_failed)
+
+/* rdi: pointer to rwlock_t */
+ENTRY(__read_lock_failed)
+ CFI_STARTPROC
+ LOCK_PREFIX
+ incl (%rdi)
+1: rep
+ nop
+ cmpl $1,(%rdi)
+ js 1b
+ LOCK_PREFIX
+ decl (%rdi)
+ js __read_lock_failed
+ ret
+ CFI_ENDPROC
+END(__read_lock_failed)
diff --git a/arch/x86_64/lib/thunk.S b/arch/x86_64/lib/thunk.S
index 332ea5d..0025535 100644
--- a/arch/x86_64/lib/thunk.S
+++ b/arch/x86_64/lib/thunk.S
@@ -1,10 +1,9 @@
- /*
- * Save registers before calling assembly functions. This avoids
- * disturbance of register allocation in some inline assembly constructs.
- * Copyright 2001,2002 by Andi Kleen, SuSE Labs.
- * Subject to the GNU public license, v.2. No warranty of any kind.
- * $Id: thunk.S,v 1.2 2002/03/13 20:06:58 ak Exp $
- */
+/*
+ * Save registers before calling assembly functions. This avoids
+ * disturbance of register allocation in some inline assembly constructs.
+ * Copyright 2001,2002 by Andi Kleen, SuSE Labs.
+ * Subject to the GNU public license, v.2. No warranty of any kind.
+ */
#include <linux/config.h>
#include <linux/linkage.h>
@@ -67,33 +66,3 @@
RESTORE_ARGS 1
ret
CFI_ENDPROC
-
-#ifdef CONFIG_SMP
-/* Support for read/write spinlocks. */
- .text
-/* rax: pointer to rwlock_t */
-ENTRY(__write_lock_failed)
- lock
- addl $RW_LOCK_BIAS,(%rax)
-1: rep
- nop
- cmpl $RW_LOCK_BIAS,(%rax)
- jne 1b
- lock
- subl $RW_LOCK_BIAS,(%rax)
- jnz __write_lock_failed
- ret
-
-/* rax: pointer to rwlock_t */
-ENTRY(__read_lock_failed)
- lock
- incl (%rax)
-1: rep
- nop
- cmpl $1,(%rax)
- js 1b
- lock
- decl (%rax)
- js __read_lock_failed
- ret
-#endif
diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c
index 4198798..1a17b07 100644
--- a/arch/x86_64/mm/fault.c
+++ b/arch/x86_64/mm/fault.c
@@ -40,8 +40,7 @@
#define PF_RSVD (1<<3)
#define PF_INSTR (1<<4)
-#ifdef CONFIG_KPROBES
-ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
+static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
/* Hook to register for page fault notifications */
int register_page_fault_notifier(struct notifier_block *nb)
@@ -49,11 +48,13 @@
vmalloc_sync_all();
return atomic_notifier_chain_register(¬ify_page_fault_chain, nb);
}
+EXPORT_SYMBOL_GPL(register_page_fault_notifier);
int unregister_page_fault_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb);
}
+EXPORT_SYMBOL_GPL(unregister_page_fault_notifier);
static inline int notify_page_fault(enum die_val val, const char *str,
struct pt_regs *regs, long err, int trap, int sig)
@@ -67,13 +68,6 @@
};
return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args);
}
-#else
-static inline int notify_page_fault(enum die_val val, const char *str,
- struct pt_regs *regs, long err, int trap, int sig)
-{
- return NOTIFY_DONE;
-}
-#endif
void bust_spinlocks(int yes)
{
@@ -102,7 +96,7 @@
static noinline int is_prefetch(struct pt_regs *regs, unsigned long addr,
unsigned long error_code)
{
- unsigned char *instr;
+ unsigned char __user *instr;
int scan_more = 1;
int prefetch = 0;
unsigned char *max_instr;
@@ -111,7 +105,7 @@
if (error_code & PF_INSTR)
return 0;
- instr = (unsigned char *)convert_rip_to_linear(current, regs);
+ instr = (unsigned char __user *)convert_rip_to_linear(current, regs);
max_instr = instr + 15;
if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
@@ -122,7 +116,7 @@
unsigned char instr_hi;
unsigned char instr_lo;
- if (__get_user(opcode, instr))
+ if (__get_user(opcode, (char __user *)instr))
break;
instr_hi = opcode & 0xf0;
@@ -160,7 +154,7 @@
case 0x00:
/* Prefetch instruction is 0x0F0D or 0x0F18 */
scan_more = 0;
- if (__get_user(opcode, instr))
+ if (__get_user(opcode, (char __user *)instr))
break;
prefetch = (instr_lo == 0xF) &&
(opcode == 0x0D || opcode == 0x18);
@@ -176,7 +170,7 @@
static int bad_address(void *p)
{
unsigned long dummy;
- return __get_user(dummy, (unsigned long *)p);
+ return __get_user(dummy, (unsigned long __user *)p);
}
void dump_pagetable(unsigned long address)
diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index 52fd42c..3e16fe0 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -229,7 +229,6 @@
/* actually usually some more */
if (size >= LARGE_PAGE_SIZE) {
- printk("SMBIOS area too long %lu\n", size);
return NULL;
}
set_pmd(temp_mappings[0].pmd, __pmd(map | _KERNPG_TABLE | _PAGE_PSE));
@@ -250,12 +249,13 @@
}
static void __meminit
-phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end)
+phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
{
- int i;
+ int i = pmd_index(address);
- for (i = 0; i < PTRS_PER_PMD; pmd++, i++, address += PMD_SIZE) {
+ for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) {
unsigned long entry;
+ pmd_t *pmd = pmd_page + pmd_index(address);
if (address >= end) {
if (!after_bootmem)
@@ -263,6 +263,10 @@
set_pmd(pmd, __pmd(0));
break;
}
+
+ if (pmd_val(*pmd))
+ continue;
+
entry = _PAGE_NX|_PAGE_PSE|_KERNPG_TABLE|_PAGE_GLOBAL|address;
entry &= __supported_pte_mask;
set_pmd(pmd, __pmd(entry));
@@ -272,45 +276,41 @@
static void __meminit
phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end)
{
- pmd_t *pmd = pmd_offset(pud, (unsigned long)__va(address));
-
- if (pmd_none(*pmd)) {
- spin_lock(&init_mm.page_table_lock);
- phys_pmd_init(pmd, address, end);
- spin_unlock(&init_mm.page_table_lock);
- __flush_tlb_all();
- }
+ pmd_t *pmd = pmd_offset(pud,0);
+ spin_lock(&init_mm.page_table_lock);
+ phys_pmd_init(pmd, address, end);
+ spin_unlock(&init_mm.page_table_lock);
+ __flush_tlb_all();
}
-static void __meminit phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+static void __meminit phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
{
- long i = pud_index(address);
+ int i = pud_index(addr);
- pud = pud + i;
- if (after_bootmem && pud_val(*pud)) {
- phys_pmd_update(pud, address, end);
- return;
- }
-
- for (; i < PTRS_PER_PUD; pud++, i++) {
+ for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE ) {
int map;
- unsigned long paddr, pmd_phys;
+ unsigned long pmd_phys;
+ pud_t *pud = pud_page + pud_index(addr);
pmd_t *pmd;
- paddr = (address & PGDIR_MASK) + i*PUD_SIZE;
- if (paddr >= end)
+ if (addr >= end)
break;
- if (!after_bootmem && !e820_any_mapped(paddr, paddr+PUD_SIZE, 0)) {
+ if (!after_bootmem && !e820_any_mapped(addr,addr+PUD_SIZE,0)) {
set_pud(pud, __pud(0));
continue;
}
+ if (pud_val(*pud)) {
+ phys_pmd_update(pud, addr, end);
+ continue;
+ }
+
pmd = alloc_low_page(&map, &pmd_phys);
spin_lock(&init_mm.page_table_lock);
set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
- phys_pmd_init(pmd, paddr, end);
+ phys_pmd_init(pmd, addr, end);
spin_unlock(&init_mm.page_table_lock);
unmap_low_page(map);
}
@@ -403,69 +403,15 @@
__flush_tlb_all();
}
-/* Compute zone sizes for the DMA and DMA32 zones in a node. */
-__init void
-size_zones(unsigned long *z, unsigned long *h,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- int i;
- unsigned long w;
-
- for (i = 0; i < MAX_NR_ZONES; i++)
- z[i] = 0;
-
- if (start_pfn < MAX_DMA_PFN)
- z[ZONE_DMA] = MAX_DMA_PFN - start_pfn;
- if (start_pfn < MAX_DMA32_PFN) {
- unsigned long dma32_pfn = MAX_DMA32_PFN;
- if (dma32_pfn > end_pfn)
- dma32_pfn = end_pfn;
- z[ZONE_DMA32] = dma32_pfn - start_pfn;
- }
- z[ZONE_NORMAL] = end_pfn - start_pfn;
-
- /* Remove lower zones from higher ones. */
- w = 0;
- for (i = 0; i < MAX_NR_ZONES; i++) {
- if (z[i])
- z[i] -= w;
- w += z[i];
- }
-
- /* Compute holes */
- w = start_pfn;
- for (i = 0; i < MAX_NR_ZONES; i++) {
- unsigned long s = w;
- w += z[i];
- h[i] = e820_hole_size(s, w);
- }
-
- /* Add the space pace needed for mem_map to the holes too. */
- for (i = 0; i < MAX_NR_ZONES; i++)
- h[i] += (z[i] * sizeof(struct page)) / PAGE_SIZE;
-
- /* The 16MB DMA zone has the kernel and other misc mappings.
- Account them too */
- if (h[ZONE_DMA]) {
- h[ZONE_DMA] += dma_reserve;
- if (h[ZONE_DMA] >= z[ZONE_DMA]) {
- printk(KERN_WARNING
- "Kernel too large and filling up ZONE_DMA?\n");
- h[ZONE_DMA] = z[ZONE_DMA];
- }
- }
-}
-
#ifndef CONFIG_NUMA
void __init paging_init(void)
{
- unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES];
-
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = {MAX_DMA_PFN,
+ MAX_DMA32_PFN,
+ end_pfn};
memory_present(0, 0, end_pfn);
sparse_init();
- size_zones(zones, holes, 0, end_pfn);
- free_area_init_node(0, NODE_DATA(0), zones,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
+ free_area_init_nodes(max_zone_pfns);
}
#endif
@@ -597,12 +543,6 @@
pci_iommu_alloc();
- /* How many end-of-memory variables you have, grandma! */
- max_low_pfn = end_pfn;
- max_pfn = end_pfn;
- num_physpages = end_pfn;
- high_memory = (void *) __va(end_pfn * PAGE_SIZE);
-
/* clear the zero-page */
memset(empty_zero_page, 0, PAGE_SIZE);
@@ -614,7 +554,8 @@
#else
totalram_pages = free_all_bootmem();
#endif
- reservedpages = end_pfn - totalram_pages - e820_hole_size(0, end_pfn);
+ reservedpages = end_pfn - totalram_pages -
+ absent_pages_in_range(0, end_pfn);
after_bootmem = 1;
@@ -714,8 +655,10 @@
#else
reserve_bootmem(phys, len);
#endif
- if (phys+len <= MAX_DMA_PFN*PAGE_SIZE)
+ if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
dma_reserve += len / PAGE_SIZE;
+ set_dma_reserve(dma_reserve);
+ }
}
int kern_addr_valid(unsigned long addr)
diff --git a/arch/x86_64/mm/k8topology.c b/arch/x86_64/mm/k8topology.c
index 7c45c2d..b5b8dba 100644
--- a/arch/x86_64/mm/k8topology.c
+++ b/arch/x86_64/mm/k8topology.c
@@ -54,6 +54,9 @@
nodes_clear(nodes_parsed);
+ if (!early_pci_allowed())
+ return -1;
+
nb = find_northbridge();
if (nb < 0)
return nb;
@@ -146,6 +149,9 @@
nodes[nodeid].start = base;
nodes[nodeid].end = limit;
+ e820_register_active_regions(nodeid,
+ nodes[nodeid].start >> PAGE_SHIFT,
+ nodes[nodeid].end >> PAGE_SHIFT);
prevbase = base;
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index b2fac14..829a008b 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -161,7 +161,7 @@
bootmap_start >> PAGE_SHIFT,
start_pfn, end_pfn);
- e820_bootmem_free(NODE_DATA(nodeid), start, end);
+ free_bootmem_with_active_regions(nodeid, end);
reserve_bootmem_node(NODE_DATA(nodeid), nodedata_phys, pgdat_size);
reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start, bootmap_pages<<PAGE_SHIFT);
@@ -175,13 +175,11 @@
void __init setup_node_zones(int nodeid)
{
unsigned long start_pfn, end_pfn, memmapsize, limit;
- unsigned long zones[MAX_NR_ZONES];
- unsigned long holes[MAX_NR_ZONES];
start_pfn = node_start_pfn(nodeid);
end_pfn = node_end_pfn(nodeid);
- Dprintk(KERN_INFO "Setting up node %d %lx-%lx\n",
+ Dprintk(KERN_INFO "Setting up memmap for node %d %lx-%lx\n",
nodeid, start_pfn, end_pfn);
/* Try to allocate mem_map at end to not fill up precious <4GB
@@ -195,10 +193,6 @@
round_down(limit - memmapsize, PAGE_SIZE),
limit);
#endif
-
- size_zones(zones, holes, start_pfn, end_pfn);
- free_area_init_node(nodeid, NODE_DATA(nodeid), zones,
- start_pfn, holes);
}
void __init numa_init_array(void)
@@ -225,7 +219,7 @@
int numa_fake __initdata = 0;
/* Numa emulation */
-static int numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
+static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
{
int i;
struct bootnode nodes[MAX_NUMNODES];
@@ -259,8 +253,11 @@
printk(KERN_ERR "No NUMA hash function found. Emulation disabled.\n");
return -1;
}
- for_each_online_node(i)
+ for_each_online_node(i) {
+ e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
+ nodes[i].end >> PAGE_SHIFT);
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
+ }
numa_init_array();
return 0;
}
@@ -299,6 +296,7 @@
for (i = 0; i < NR_CPUS; i++)
numa_set_node(i, 0);
node_to_cpumask[0] = cpumask_of_cpu(0);
+ e820_register_active_regions(0, start_pfn, end_pfn);
setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT);
}
@@ -340,17 +338,23 @@
void __init paging_init(void)
{
int i;
+ unsigned long max_zone_pfns[MAX_NR_ZONES] = { MAX_DMA_PFN,
+ MAX_DMA32_PFN,
+ end_pfn};
arch_sparse_init();
for_each_online_node(i) {
setup_node_zones(i);
}
+
+ free_area_init_nodes(max_zone_pfns);
}
-/* [numa=off] */
-__init int numa_setup(char *opt)
+static __init int numa_setup(char *opt)
{
+ if (!opt)
+ return -EINVAL;
if (!strncmp(opt,"off",3))
numa_off = 1;
#ifdef CONFIG_NUMA_EMU
@@ -366,9 +370,11 @@
if (!strncmp(opt,"hotadd=", 7))
hotadd_percent = simple_strtoul(opt+7, NULL, 10);
#endif
- return 1;
+ return 0;
}
+early_param("numa", numa_setup);
+
/*
* Setup early cpu_to_node.
*
diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c
index 2685b1f..3e231d76 100644
--- a/arch/x86_64/mm/pageattr.c
+++ b/arch/x86_64/mm/pageattr.c
@@ -108,8 +108,8 @@
BUG_ON(pud_none(*pud));
pmd = pmd_offset(pud, address);
BUG_ON(pmd_val(*pmd) & _PAGE_PSE);
- pgprot_val(ref_prot) |= _PAGE_PSE;
large_pte = mk_pte_phys(__pa(address) & LARGE_PAGE_MASK, ref_prot);
+ large_pte = pte_mkhuge(large_pte);
set_pte((pte_t *)pmd, large_pte);
}
@@ -119,32 +119,28 @@
{
pte_t *kpte;
struct page *kpte_page;
- unsigned kpte_flags;
pgprot_t ref_prot2;
kpte = lookup_address(address);
if (!kpte) return 0;
kpte_page = virt_to_page(((unsigned long)kpte) & PAGE_MASK);
- kpte_flags = pte_val(*kpte);
if (pgprot_val(prot) != pgprot_val(ref_prot)) {
- if ((kpte_flags & _PAGE_PSE) == 0) {
+ if (!pte_huge(*kpte)) {
set_pte(kpte, pfn_pte(pfn, prot));
} else {
/*
* split_large_page will take the reference for this
* change_page_attr on the split page.
*/
-
struct page *split;
- ref_prot2 = __pgprot(pgprot_val(pte_pgprot(*lookup_address(address))) & ~(1<<_PAGE_BIT_PSE));
-
+ ref_prot2 = pte_pgprot(pte_clrhuge(*kpte));
split = split_large_page(address, prot, ref_prot2);
if (!split)
return -ENOMEM;
- set_pte(kpte,mk_pte(split, ref_prot2));
+ set_pte(kpte, mk_pte(split, ref_prot2));
kpte_page = split;
- }
+ }
page_private(kpte_page)++;
- } else if ((kpte_flags & _PAGE_PSE) == 0) {
+ } else if (!pte_huge(*kpte)) {
set_pte(kpte, pfn_pte(pfn, ref_prot));
BUG_ON(page_private(kpte_page) == 0);
page_private(kpte_page)--;
@@ -190,10 +186,12 @@
* lowmem */
if (__pa(address) < KERNEL_TEXT_SIZE) {
unsigned long addr2;
- pgprot_t prot2 = prot;
+ pgprot_t prot2;
addr2 = __START_KERNEL_map + __pa(address);
- pgprot_val(prot2) &= ~_PAGE_NX;
- err = __change_page_attr(addr2, pfn, prot2, PAGE_KERNEL_EXEC);
+ /* Make sure the kernel mappings stay executable */
+ prot2 = pte_pgprot(pte_mkexec(pfn_pte(0, prot)));
+ err = __change_page_attr(addr2, pfn, prot2,
+ PAGE_KERNEL_EXEC);
}
}
up_write(&init_mm.mmap_sem);
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 502fce6..f8c04d6 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -21,6 +21,8 @@
#include <asm/numa.h>
#include <asm/e820.h>
+int acpi_numa __initdata;
+
#if (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \
defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) \
&& !defined(CONFIG_MEMORY_HOTPLUG)
@@ -91,6 +93,7 @@
apicid_to_node[i] = NUMA_NO_NODE;
for (i = 0; i < MAX_NUMNODES; i++)
nodes_add[i].start = nodes[i].end = 0;
+ remove_all_active_ranges();
}
static __init inline int srat_disabled(void)
@@ -173,7 +176,7 @@
if (mem < 0)
return 0;
- allowed = (end_pfn - e820_hole_size(0, end_pfn)) * PAGE_SIZE;
+ allowed = (end_pfn - absent_pages_in_range(0, end_pfn)) * PAGE_SIZE;
allowed = (allowed / 100) * hotadd_percent;
if (allocated + mem > allowed) {
unsigned long range;
@@ -223,8 +226,10 @@
}
/* This check might be a bit too strict, but I'm keeping it for now. */
- if (e820_hole_size(s_pfn, e_pfn) != e_pfn - s_pfn) {
- printk(KERN_ERR "SRAT: Hotplug area has existing memory\n");
+ if (absent_pages_in_range(s_pfn, e_pfn) != e_pfn - s_pfn) {
+ printk(KERN_ERR
+ "SRAT: Hotplug area %lu -> %lu has existing memory\n",
+ s_pfn, e_pfn);
return -1;
}
@@ -317,6 +322,10 @@
printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
nd->start, nd->end);
+ e820_register_active_regions(node, nd->start >> PAGE_SHIFT,
+ nd->end >> PAGE_SHIFT);
+ push_node_boundaries(node, nd->start >> PAGE_SHIFT,
+ nd->end >> PAGE_SHIFT);
#ifdef RESERVE_HOTADD
if (ma->flags.hot_pluggable && reserve_hotadd(node, start, end) < 0) {
@@ -341,13 +350,13 @@
unsigned long s = nodes[i].start >> PAGE_SHIFT;
unsigned long e = nodes[i].end >> PAGE_SHIFT;
pxmram += e - s;
- pxmram -= e820_hole_size(s, e);
+ pxmram -= absent_pages_in_range(s, e);
pxmram -= nodes_add[i].end - nodes_add[i].start;
if ((long)pxmram < 0)
pxmram = 0;
}
- e820ram = end_pfn - e820_hole_size(0, end_pfn);
+ e820ram = end_pfn - absent_pages_in_range(0, end_pfn);
/* We seem to lose 3 pages somewhere. Allow a bit of slack. */
if ((long)(e820ram - pxmram) >= 1*1024*1024) {
printk(KERN_ERR
diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile
index a3f6ad5..1eb18f4 100644
--- a/arch/x86_64/pci/Makefile
+++ b/arch/x86_64/pci/Makefile
@@ -9,7 +9,7 @@
obj-$(CONFIG_PCI_DIRECT)+= direct.o
obj-y += fixup.o init.o
obj-$(CONFIG_ACPI) += acpi.o
-obj-y += legacy.o irq.o common.o
+obj-y += legacy.o irq.o common.o early.o
# mmconfig has a 64bit special
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o
@@ -23,3 +23,4 @@
fixup-y += ../../i386/pci/fixup.o
i386-y += ../../i386/pci/i386.o
init-y += ../../i386/pci/init.o
+early-y += ../../i386/pci/early.o
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index 3c55c76..7732f42 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -156,15 +156,45 @@
addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
if (addr == NULL|| readl(addr) != val1) {
set_bit(i + 32*k, fallback_slots);
- printk(KERN_NOTICE
- "PCI: No mmconfig possible on device %x:%x\n",
- k, i);
+ printk(KERN_NOTICE "PCI: No mmconfig possible"
+ " on device %02x:%02x\n", k, i);
}
}
}
}
-void __init pci_mmcfg_init(void)
+static __init void pci_mmcfg_insert_resources(void)
+{
+#define PCI_MMCFG_RESOURCE_NAME_LEN 19
+ int i;
+ struct resource *res;
+ char *names;
+ unsigned num_buses;
+
+ res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
+ pci_mmcfg_config_num, GFP_KERNEL);
+
+ if (!res) {
+ printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
+ return;
+ }
+
+ names = (void *)&res[pci_mmcfg_config_num];
+ for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
+ num_buses = pci_mmcfg_config[i].end_bus_number -
+ pci_mmcfg_config[i].start_bus_number + 1;
+ res->name = names;
+ snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
+ pci_mmcfg_config[i].pci_segment_group_number);
+ res->start = pci_mmcfg_config[i].base_address;
+ res->end = res->start + (num_buses << 20) - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ insert_resource(&iomem_resource, res);
+ names += PCI_MMCFG_RESOURCE_NAME_LEN;
+ }
+}
+
+void __init pci_mmcfg_init(int type)
{
int i;
@@ -177,7 +207,9 @@
(pci_mmcfg_config[0].base_address == 0))
return;
- if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
+ /* Only do this check when type 1 works. If it doesn't work
+ assume we run on a Mac and always use MCFG */
+ if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
@@ -186,7 +218,6 @@
return;
}
- /* RED-PEN i386 doesn't do _nocache right now */
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
printk("PCI: Can not allocate memory for mmconfig structures\n");
@@ -205,6 +236,7 @@
}
unreachable_devices();
+ pci_mmcfg_insert_resources();
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
diff --git a/block/blktrace.c b/block/blktrace.c
index 265f7a8..2b4ef2b 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -217,7 +217,7 @@
static int blk_dropped_open(struct inode *inode, struct file *filp)
{
- filp->private_data = inode->u.generic_ip;
+ filp->private_data = inode->i_private;
return 0;
}
diff --git a/drivers/acorn/char/i2c.c b/drivers/acorn/char/i2c.c
index c26c08b..bdb9c8b 100644
--- a/drivers/acorn/char/i2c.c
+++ b/drivers/acorn/char/i2c.c
@@ -308,7 +308,6 @@
.getsda = ioc_getsda,
.getscl = ioc_getscl,
.udelay = 80,
- .mdelay = 80,
.timeout = 100
};
diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c
index 6809c28..6342e61 100644
--- a/drivers/acpi/i2c_ec.c
+++ b/drivers/acpi/i2c_ec.c
@@ -293,7 +293,7 @@
I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC);
}
-static struct i2c_algorithm acpi_ec_smbus_algorithm = {
+static const struct i2c_algorithm acpi_ec_smbus_algorithm = {
.smbus_xfer = acpi_ec_smb_access,
.functionality = acpi_ec_smb_func,
};
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 507f051..20beea7 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1079,7 +1079,7 @@
acpi_status acpi_os_delete_cache(acpi_cache_t * cache)
{
- (void)kmem_cache_destroy(cache);
+ kmem_cache_destroy(cache);
return (AE_OK);
}
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 99837d9..3f4aa0c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -311,7 +311,7 @@
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ depends on ISA && EXPERIMENTAL
help
This option enables support for ISA/VLB bus legacy PATA
ports and allows them to be accessed via the new ATA layer.
@@ -400,6 +400,7 @@
config PATA_QDI
tristate "QDI VLB PATA support"
+ depends on ISA
help
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 1d1c30a..377425e 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -143,7 +143,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ffa111e..5719704 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -643,11 +643,9 @@
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
- ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
- ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 753b015..b4abd68 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5453,6 +5453,11 @@
int rc;
DPRINTK("ENTER\n");
+
+ if (ent->irq == 0) {
+ dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n");
+ return 0;
+ }
/* alloc a container for our list of ATA ports (buses) */
host = kzalloc(sizeof(struct ata_host) +
(ent->n_ports * sizeof(void *)), GFP_KERNEL);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 3fa80f0..02b2b27 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1515,7 +1515,11 @@
if (prereset) {
rc = prereset(ap);
if (rc) {
- ata_port_printk(ap, KERN_ERR,
+ if (rc == -ENOENT) {
+ ata_port_printk(ap, KERN_DEBUG, "port disabled. ignoring.\n");
+ ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
+ } else
+ ata_port_printk(ap, KERN_ERR,
"prereset failed (errno=%d)\n", rc);
return rc;
}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 688bb55..08b3a40 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -881,7 +881,7 @@
probe_ent->private_data = port[0]->private_data;
if (port_mask & ATA_PORT_PRIMARY) {
- probe_ent->irq = 14;
+ probe_ent->irq = ATA_PRIMARY_IRQ;
probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
probe_ent->port[0].altstatus_addr =
probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
@@ -896,9 +896,9 @@
if (port_mask & ATA_PORT_SECONDARY) {
if (probe_ent->irq)
- probe_ent->irq2 = 15;
+ probe_ent->irq2 = ATA_SECONDARY_IRQ;
else
- probe_ent->irq = 15;
+ probe_ent->irq = ATA_SECONDARY_IRQ;
probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
probe_ent->port[1].altstatus_addr =
probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 8448ee6..87af3b5 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -369,7 +369,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -410,7 +410,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -448,7 +448,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -485,7 +485,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 3293cf9..599ee26 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
/**
* timing_setup - shared timing computation and load
@@ -137,11 +137,8 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 ata66;
- if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
+ return -ENOENT;
pci_read_config_byte(pdev, 0x42, &ata66);
if (ata66 & bitmask[ap->port_no])
@@ -167,11 +164,9 @@
{ 0x40, 1, 0x01, 0x01 }
};
- if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
+ return -ENOENT;
+
/* No host side cable detection */
ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap);
@@ -262,12 +257,8 @@
u8 ata66;
u16 udma;
- if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
-
+ if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
+ return -ENOENT;
pci_read_config_byte(pdev, 0x52, &ata66);
if (ata66 & bitmask[ap->port_no])
@@ -368,7 +359,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -402,7 +393,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -436,7 +427,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -470,7 +461,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -504,7 +495,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -538,7 +529,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index d6ef3bf..c4ccb75 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.2"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -47,11 +47,9 @@
{ 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
};
- if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -90,11 +88,9 @@
u8 tmp;
/* Odd numbered device ids are the units with enable bits (the -R cards) */
- if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+ return -ENOENT;
+
pci_read_config_byte(pdev, 0x49, &tmp);
if (tmp & (1 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
@@ -344,7 +340,7 @@
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -379,8 +375,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 3f78a1e..6c2269b 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
enum {
ATIIXP_IDE_PIO_TIMING = 0x40,
@@ -41,11 +41,9 @@
{ 0x48, 1, 0x08, 0x00 }
};
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap);
}
@@ -244,7 +242,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index abf1bb7..e92b0ef 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -301,7 +301,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -335,7 +335,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -369,7 +369,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 792ce48..a6c6ceb 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -193,8 +193,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index f3d8a3b..7bba4d95 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -207,7 +207,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = cs5530_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 69d6b42..d64fcdc 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -211,7 +211,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index fd55474..dfa5ac5 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -162,7 +162,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index c30bc18..95cd1ca 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_efar"
-#define DRV_VERSION "0.4.1"
+#define DRV_VERSION "0.4.2"
/**
* efar_pre_reset - check for 40/80 pin
@@ -42,11 +42,9 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 tmp;
- if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
+ return -ENOENT;
+
pci_read_config_byte(pdev, 0x47, &tmp);
if (tmp & (2 >> ap->port_no))
ap->cbl = ATA_CBL_PATA40;
@@ -263,8 +261,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 94bb1df..cf656ec 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -360,7 +360,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 532a792..10318c0 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -793,7 +793,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -832,7 +832,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -872,7 +872,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -912,7 +912,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 06c8db0..5c5d4f6 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -372,7 +372,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = hpt3x2n_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 1527701..1f084ab 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -145,7 +145,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 73948c8..640b8b0 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -52,7 +52,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index af39097..82a46ff 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -703,7 +703,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = it821x_smart_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -739,7 +739,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = it821x_passthru_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 6832a64..be3a866 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -51,7 +51,7 @@
/* Check if our port is enabled */
pci_read_config_dword(pdev, 0x40, &control);
if ((control & port_mask) == 0)
- return 0;
+ return -ENOENT;
/* There are two basic mappings. One has the two SATA ports merged
as master/slave and the secondary as PATA, the other has only the
@@ -164,8 +164,7 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- /* Timeout handling. Special recovery hooks here */
- .eng_timeout = ata_eng_timeout,
+ /* IRQ-related hooks */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index ad37c22..10231ef 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -161,7 +161,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer_noirq,
.irq_handler = ata_interrupt,
@@ -186,7 +186,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer_noirq,
.irq_handler = ata_interrupt,
@@ -296,7 +296,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = pdc_data_xfer_vlb,
.irq_handler = ata_interrupt,
@@ -348,7 +348,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */
.irq_handler = ata_interrupt,
@@ -411,7 +411,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */
.irq_handler = ata_interrupt,
@@ -529,7 +529,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -659,7 +659,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = opti82c46x_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1958c4e..3c65393 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -18,7 +18,7 @@
* The driver conciously keeps this logic internally to avoid pushing quirky
* PATA history into the clean libata layer.
*
- * Thinkpad specific note: If you boot an MPIIX using thinkpad with a PCMCIA
+ * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
* hard disk present this driver will not detect it. This is not a bug. In this
* configuration the secondary port of the MPIIX is disabled and the addresses
* are decoded by the PCMCIA bridge and therefore are for a generic IDE driver
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.1"
+#define DRV_VERSION "0.7.2"
enum {
IDETIM = 0x6C, /* IDE control register */
@@ -54,11 +54,8 @@
{ 0x6F, 1, 0x80, 0x80 }
};
- if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &mpiix_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 16cb254..76eb9c9 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -90,8 +90,7 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- /* Timeout handling. Special recovery hooks here */
- .eng_timeout = ata_eng_timeout,
+ /* IRQ-related hooks */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 93d6646..2005a95 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -45,11 +45,8 @@
{ 0x47, 1, 0x08, 0x08 }
};
- if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -179,7 +176,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ns87410_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 04c618a..31a285c 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_oldpiix"
-#define DRV_VERSION "0.5.1"
+#define DRV_VERSION "0.5.2"
/**
* oldpiix_pre_reset - probe begin
@@ -42,11 +42,8 @@
{ 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
};
- if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index c3d0132..57fe21f 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.2.5"
enum {
READ_REG = 0, /* index of Read cycle timing register */
@@ -59,11 +59,9 @@
{ 0x40, 1, 0x08, 0x00 }
};
- if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -229,7 +227,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 177a455..7296a20 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
enum {
READ_REG = 0, /* index of Read cycle timing register */
@@ -59,11 +59,9 @@
0x40, 1, 0x08, 0x00
};
- if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
+ return -ENOENT;
+
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -388,7 +386,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -423,7 +421,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 62b25cd..cb501e1 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -87,7 +87,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer_noirq,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 31ab9c8..bd4ed67 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -36,7 +36,7 @@
#include <asm/io.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.74-ac3"
+#define DRV_VERSION "0.74-ac5"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
@@ -311,10 +311,8 @@
static int pdc2027x_prereset(struct ata_port *ap)
{
/* Check whether port enabled */
- if (!pdc2027x_port_enabled(ap)) {
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pdc2027x_port_enabled(ap))
+ return -ENOENT;
pdc2027x_cbl_detect(ap);
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 35cfdf0a..7977f47 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -184,7 +184,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = qdi_data_xfer,
.irq_handler = ata_interrupt,
@@ -212,7 +212,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = qdi_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 277f841..c20bcf4 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -255,8 +255,6 @@
.qc_issue = radisys_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 3c6d84f..eccc6fd 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -112,7 +112,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.freeze = ata_bmdma_freeze,
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 4166c1a..107e6cd 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -217,7 +217,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = sc1200_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index af45611..a5c8d7e 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.3.6"
+#define DRV_VERSION "0.3.7"
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
@@ -128,7 +128,7 @@
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
- { PCI_DEVICE_ID_SERVERWORKS_OSB4, PCI_ANY_ID, osb4_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable },
{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
@@ -352,10 +352,12 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
@@ -385,10 +387,12 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 8f7db96..c8b2e26 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -251,7 +251,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 2e555168..17791e2 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -34,7 +34,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_sis"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.4"
struct sis_chipset {
u16 device; /* PCI host ID */
@@ -74,11 +74,9 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u16 tmp;
- if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
+ return -ENOENT;
+
/* The top bit of this register is the cable detect bit */
pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
if (tmp & 0x8000)
@@ -575,8 +573,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -610,8 +606,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -646,8 +640,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -681,8 +673,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -716,8 +706,6 @@
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_pio_data_xfer,
- .eng_timeout = ata_eng_timeout,
-
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index f849978..5b762ac 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -19,7 +19,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
enum {
/*
@@ -49,11 +49,8 @@
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- dev_printk(KERN_INFO, &pdev->dev, "port disabled. ignoring.\n");
- return 0;
- }
+ if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -264,7 +261,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 36f7887..a954ed9 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -46,13 +46,13 @@
#define DRV_VERSION "0.2.5"
/**
- * triflex_probe_init - probe begin
+ * triflex_prereset - probe begin
* @ap: ATA port
*
* Set up cable type and use generic probe init
*/
-static int triflex_probe_init(struct ata_port *ap)
+static int triflex_prereset(struct ata_port *ap)
{
static const struct pci_bits triflex_enable_bits[] = {
{ 0x80, 1, 0x01, 0x01 },
@@ -61,11 +61,8 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
+ return -ENOENT;
ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -74,7 +71,7 @@
static void triflex_error_handler(struct ata_port *ap)
{
- ata_bmdma_drive_eh(ap, triflex_probe_init, ata_std_softreset, NULL, ata_std_postreset);
+ ata_bmdma_drive_eh(ap, triflex_prereset, ata_std_softreset, NULL, ata_std_postreset);
}
/**
@@ -221,7 +218,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 1b2ff13..7b5dd23 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -60,7 +60,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.1.13"
+#define DRV_VERSION "0.1.14"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -155,11 +155,8 @@
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) {
- ata_port_disable(ap);
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return 0;
- }
+ if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
+ return -ENOENT;
}
if ((config->flags & VIA_UDMA) >= VIA_UDMA_66)
@@ -325,7 +322,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer,
.irq_handler = ata_interrupt,
@@ -360,7 +357,7 @@
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+
.data_xfer = ata_pio_data_xfer_noirq,
.irq_handler = ata_interrupt,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index fdce6e0..c01496d 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -463,6 +463,7 @@
.qc_prep = mv_qc_prep_iie,
.qc_issue = mv_qc_issue,
+ .data_xfer = ata_mmio_data_xfer,
.eng_timeout = mv_eng_timeout,
diff --git a/drivers/base/base.h b/drivers/base/base.h
index c3b8dc9..d26644a 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -16,7 +16,7 @@
extern int attribute_container_init(void);
extern int bus_add_device(struct device * dev);
-extern void bus_attach_device(struct device * dev);
+extern int bus_attach_device(struct device * dev);
extern void bus_remove_device(struct device * dev);
extern struct bus_type *get_bus(struct bus_type * bus);
extern void put_bus(struct bus_type * bus);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 2e954d0..12173d1 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -371,12 +371,20 @@
if (bus) {
pr_debug("bus %s: add device %s\n", bus->name, dev->bus_id);
error = device_add_attrs(bus, dev);
- if (!error) {
- sysfs_create_link(&bus->devices.kobj, &dev->kobj, dev->bus_id);
- sysfs_create_link(&dev->kobj, &dev->bus->subsys.kset.kobj, "subsystem");
- sysfs_create_link(&dev->kobj, &dev->bus->subsys.kset.kobj, "bus");
- }
+ if (error)
+ goto out;
+ error = sysfs_create_link(&bus->devices.kobj,
+ &dev->kobj, dev->bus_id);
+ if (error)
+ goto out;
+ error = sysfs_create_link(&dev->kobj,
+ &dev->bus->subsys.kset.kobj, "subsystem");
+ if (error)
+ goto out;
+ error = sysfs_create_link(&dev->kobj,
+ &dev->bus->subsys.kset.kobj, "bus");
}
+out:
return error;
}
@@ -384,16 +392,24 @@
* bus_attach_device - add device to bus
* @dev: device tried to attach to a driver
*
+ * - Add device to bus's list of devices.
* - Try to attach to driver.
*/
-void bus_attach_device(struct device * dev)
+int bus_attach_device(struct device * dev)
{
- struct bus_type * bus = dev->bus;
+ struct bus_type *bus = dev->bus;
+ int ret = 0;
if (bus) {
- device_attach(dev);
- klist_add_tail(&dev->knode_bus, &bus->klist_devices);
+ dev->is_registered = 1;
+ ret = device_attach(dev);
+ if (ret >= 0) {
+ klist_add_tail(&dev->knode_bus, &bus->klist_devices);
+ ret = 0;
+ } else
+ dev->is_registered = 0;
}
+ return ret;
}
/**
@@ -412,7 +428,8 @@
sysfs_remove_link(&dev->kobj, "bus");
sysfs_remove_link(&dev->bus->devices.kobj, dev->bus_id);
device_remove_attrs(dev->bus, dev);
- klist_remove(&dev->knode_bus);
+ dev->is_registered = 0;
+ klist_del(&dev->knode_bus);
pr_debug("bus %s: remove device %s\n", dev->bus->name, dev->bus_id);
device_release_driver(dev);
put_bus(dev->bus);
@@ -455,10 +472,17 @@
* Thanks to drivers making their tables __devinit, we can't allow manual
* bind and unbind from userspace unless CONFIG_HOTPLUG is enabled.
*/
-static void add_bind_files(struct device_driver *drv)
+static int __must_check add_bind_files(struct device_driver *drv)
{
- driver_create_file(drv, &driver_attr_unbind);
- driver_create_file(drv, &driver_attr_bind);
+ int ret;
+
+ ret = driver_create_file(drv, &driver_attr_unbind);
+ if (ret == 0) {
+ ret = driver_create_file(drv, &driver_attr_bind);
+ if (ret)
+ driver_remove_file(drv, &driver_attr_unbind);
+ }
+ return ret;
}
static void remove_bind_files(struct device_driver *drv)
@@ -467,7 +491,7 @@
driver_remove_file(drv, &driver_attr_unbind);
}
#else
-static inline void add_bind_files(struct device_driver *drv) {}
+static inline int add_bind_files(struct device_driver *drv) { return 0; }
static inline void remove_bind_files(struct device_driver *drv) {}
#endif
@@ -476,7 +500,7 @@
* @drv: driver.
*
*/
-int bus_add_driver(struct device_driver * drv)
+int bus_add_driver(struct device_driver *drv)
{
struct bus_type * bus = get_bus(drv->bus);
int error = 0;
@@ -484,27 +508,39 @@
if (bus) {
pr_debug("bus %s: add driver %s\n", bus->name, drv->name);
error = kobject_set_name(&drv->kobj, "%s", drv->name);
- if (error) {
- put_bus(bus);
- return error;
- }
+ if (error)
+ goto out_put_bus;
drv->kobj.kset = &bus->drivers;
- if ((error = kobject_register(&drv->kobj))) {
- put_bus(bus);
- return error;
- }
+ if ((error = kobject_register(&drv->kobj)))
+ goto out_put_bus;
- driver_attach(drv);
+ error = driver_attach(drv);
+ if (error)
+ goto out_unregister;
klist_add_tail(&drv->knode_bus, &bus->klist_drivers);
module_add_driver(drv->owner, drv);
- driver_add_attrs(bus, drv);
- add_bind_files(drv);
+ error = driver_add_attrs(bus, drv);
+ if (error) {
+ /* How the hell do we get out of this pickle? Give up */
+ printk(KERN_ERR "%s: driver_add_attrs(%s) failed\n",
+ __FUNCTION__, drv->name);
+ }
+ error = add_bind_files(drv);
+ if (error) {
+ /* Ditto */
+ printk(KERN_ERR "%s: add_bind_files(%s) failed\n",
+ __FUNCTION__, drv->name);
+ }
}
return error;
+out_unregister:
+ kobject_unregister(&drv->kobj);
+out_put_bus:
+ put_bus(bus);
+ return error;
}
-
/**
* bus_remove_driver - delete driver from bus's knowledge.
* @drv: driver.
@@ -530,16 +566,21 @@
/* Helper for bus_rescan_devices's iter */
-static int bus_rescan_devices_helper(struct device *dev, void *data)
+static int __must_check bus_rescan_devices_helper(struct device *dev,
+ void *data)
{
+ int ret = 0;
+
if (!dev->driver) {
if (dev->parent) /* Needed for USB */
down(&dev->parent->sem);
- device_attach(dev);
+ ret = device_attach(dev);
if (dev->parent)
up(&dev->parent->sem);
+ if (ret > 0)
+ ret = 0;
}
- return 0;
+ return ret < 0 ? ret : 0;
}
/**
@@ -550,9 +591,9 @@
* attached and rescan it against existing drivers to see if it matches
* any by calling device_attach() for the unbound devices.
*/
-void bus_rescan_devices(struct bus_type * bus)
+int bus_rescan_devices(struct bus_type * bus)
{
- bus_for_each_dev(bus, NULL, NULL, bus_rescan_devices_helper);
+ return bus_for_each_dev(bus, NULL, NULL, bus_rescan_devices_helper);
}
/**
@@ -564,7 +605,7 @@
* to use if probing criteria changed during a devices lifetime and
* driver attachment should change accordingly.
*/
-void device_reprobe(struct device *dev)
+int device_reprobe(struct device *dev)
{
if (dev->driver) {
if (dev->parent) /* Needed for USB */
@@ -573,14 +614,14 @@
if (dev->parent)
up(&dev->parent->sem);
}
-
- bus_rescan_devices_helper(dev, NULL);
+ return bus_rescan_devices_helper(dev, NULL);
}
EXPORT_SYMBOL_GPL(device_reprobe);
-struct bus_type * get_bus(struct bus_type * bus)
+struct bus_type *get_bus(struct bus_type *bus)
{
- return bus ? container_of(subsys_get(&bus->subsys), struct bus_type, subsys) : NULL;
+ return bus ? container_of(subsys_get(&bus->subsys),
+ struct bus_type, subsys) : NULL;
}
void put_bus(struct bus_type * bus)
@@ -655,22 +696,6 @@
put_device(dev);
}
-static void klist_drivers_get(struct klist_node *n)
-{
- struct device_driver *drv = container_of(n, struct device_driver,
- knode_bus);
-
- get_driver(drv);
-}
-
-static void klist_drivers_put(struct klist_node *n)
-{
- struct device_driver *drv = container_of(n, struct device_driver,
- knode_bus);
-
- put_driver(drv);
-}
-
/**
* bus_register - register a bus with the system.
* @bus: bus.
@@ -706,7 +731,7 @@
goto bus_drivers_fail;
klist_init(&bus->klist_devices, klist_devices_get, klist_devices_put);
- klist_init(&bus->klist_drivers, klist_drivers_get, klist_drivers_put);
+ klist_init(&bus->klist_drivers, NULL, NULL);
bus_add_attrs(bus);
pr_debug("bus type '%s' registered\n", bus->name);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index de89083..b06b0e2 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -19,6 +19,8 @@
#include <linux/slab.h>
#include "base.h"
+extern struct subsystem devices_subsys;
+
#define to_class_attr(_attr) container_of(_attr, struct class_attribute, attr)
#define to_class(obj) container_of(obj, struct class, subsys.kset.kobj)
@@ -197,7 +199,7 @@
* Note, the pointer created here is to be destroyed when finished by
* making a call to class_destroy().
*/
-struct class *class_create(struct module *owner, char *name)
+struct class *class_create(struct module *owner, const char *name)
{
struct class *cls;
int retval;
@@ -361,7 +363,7 @@
pr_debug("%s - name = %s\n", __FUNCTION__, class_dev->class_id);
if (class_dev->dev) {
- /* add physical device, backing this device */
+ /* add device, backing this class device (deprecated) */
struct device *dev = class_dev->dev;
char *path = kobject_get_path(&dev->kobj, GFP_KERNEL);
@@ -679,7 +681,8 @@
struct class_device *class_device_create(struct class *cls,
struct class_device *parent,
dev_t devt,
- struct device *device, char *fmt, ...)
+ struct device *device,
+ const char *fmt, ...)
{
va_list args;
struct class_device *class_dev = NULL;
@@ -839,6 +842,7 @@
{
struct class *parent;
struct class_device *class_dev;
+ struct device *dev;
if (!class_intf || !class_intf->class)
return -ENODEV;
@@ -853,6 +857,10 @@
list_for_each_entry(class_dev, &parent->children, node)
class_intf->add(class_dev, class_intf);
}
+ if (class_intf->add_dev) {
+ list_for_each_entry(dev, &parent->devices, node)
+ class_intf->add_dev(dev, class_intf);
+ }
up(&parent->sem);
return 0;
@@ -862,6 +870,7 @@
{
struct class * parent = class_intf->class;
struct class_device *class_dev;
+ struct device *dev;
if (!parent)
return;
@@ -872,12 +881,31 @@
list_for_each_entry(class_dev, &parent->children, node)
class_intf->remove(class_dev, class_intf);
}
+ if (class_intf->remove_dev) {
+ list_for_each_entry(dev, &parent->devices, node)
+ class_intf->remove_dev(dev, class_intf);
+ }
up(&parent->sem);
class_put(parent);
}
+int virtual_device_parent(struct device *dev)
+{
+ if (!dev->class)
+ return -ENODEV;
+ if (!dev->class->virtual_dir) {
+ static struct kobject *virtual_dir = NULL;
+
+ if (!virtual_dir)
+ virtual_dir = kobject_add_dir(&devices_subsys.kset.kobj, "virtual");
+ dev->class->virtual_dir = kobject_add_dir(virtual_dir, dev->class->name);
+ }
+
+ dev->kobj.parent = dev->class->virtual_dir;
+ return 0;
+}
int __init classes_init(void)
{
diff --git a/drivers/base/core.c b/drivers/base/core.c
index be6b5bc..b224bb4 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -3,6 +3,8 @@
*
* Copyright (c) 2002-3 Patrick Mochel
* Copyright (c) 2002-3 Open Source Development Labs
+ * Copyright (c) 2006 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (c) 2006 Novell, Inc.
*
* This file is released under the GPLv2
*
@@ -92,6 +94,8 @@
if (dev->release)
dev->release(dev);
+ else if (dev->class && dev->class->dev_release)
+ dev->class->dev_release(dev);
else {
printk(KERN_ERR "Device '%s' does not have a release() function, "
"it is broken and must be fixed.\n",
@@ -149,17 +153,21 @@
"MINOR=%u", MINOR(dev->devt));
}
- /* add bus name of physical device */
+ /* add bus name (same as SUBSYSTEM, deprecated) */
if (dev->bus)
add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
"PHYSDEVBUS=%s", dev->bus->name);
- /* add driver name of physical device */
- if (dev->driver)
+ /* add driver name (PHYSDEV* values are deprecated)*/
+ if (dev->driver) {
+ add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "DRIVER=%s", dev->driver->name);
add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
"PHYSDEVDRIVER=%s", dev->driver->name);
+ }
/* terminate, set to next free slot, shrink available space */
envp[i] = NULL;
@@ -177,6 +185,15 @@
}
}
+ if (dev->class && dev->class->dev_uevent) {
+ /* have the class specific function add its stuff */
+ retval = dev->class->dev_uevent(dev, envp, num_envp, buffer, buffer_size);
+ if (retval) {
+ pr_debug("%s - dev_uevent() returned %d\n",
+ __FUNCTION__, retval);
+ }
+ }
+
return retval;
}
@@ -193,6 +210,72 @@
return count;
}
+static int device_add_groups(struct device *dev)
+{
+ int i;
+ int error = 0;
+
+ if (dev->groups) {
+ for (i = 0; dev->groups[i]; i++) {
+ error = sysfs_create_group(&dev->kobj, dev->groups[i]);
+ if (error) {
+ while (--i >= 0)
+ sysfs_remove_group(&dev->kobj, dev->groups[i]);
+ goto out;
+ }
+ }
+ }
+out:
+ return error;
+}
+
+static void device_remove_groups(struct device *dev)
+{
+ int i;
+ if (dev->groups) {
+ for (i = 0; dev->groups[i]; i++) {
+ sysfs_remove_group(&dev->kobj, dev->groups[i]);
+ }
+ }
+}
+
+static int device_add_attrs(struct device *dev)
+{
+ struct class *class = dev->class;
+ int error = 0;
+ int i;
+
+ if (!class)
+ return 0;
+
+ if (class->dev_attrs) {
+ for (i = 0; attr_name(class->dev_attrs[i]); i++) {
+ error = device_create_file(dev, &class->dev_attrs[i]);
+ if (error)
+ break;
+ }
+ }
+ if (error)
+ while (--i >= 0)
+ device_remove_file(dev, &class->dev_attrs[i]);
+ return error;
+}
+
+static void device_remove_attrs(struct device *dev)
+{
+ struct class *class = dev->class;
+ int i;
+
+ if (!class)
+ return;
+
+ if (class->dev_attrs) {
+ for (i = 0; attr_name(class->dev_attrs[i]); i++)
+ device_remove_file(dev, &class->dev_attrs[i]);
+ }
+}
+
+
static ssize_t show_dev(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -236,6 +319,32 @@
}
}
+/**
+ * device_create_bin_file - create sysfs binary attribute file for device.
+ * @dev: device.
+ * @attr: device binary attribute descriptor.
+ */
+int device_create_bin_file(struct device *dev, struct bin_attribute *attr)
+{
+ int error = -EINVAL;
+ if (dev)
+ error = sysfs_create_bin_file(&dev->kobj, attr);
+ return error;
+}
+EXPORT_SYMBOL_GPL(device_create_bin_file);
+
+/**
+ * device_remove_bin_file - remove sysfs binary attribute file
+ * @dev: device.
+ * @attr: device binary attribute descriptor.
+ */
+void device_remove_bin_file(struct device *dev, struct bin_attribute *attr)
+{
+ if (dev)
+ sysfs_remove_bin_file(&dev->kobj, attr);
+}
+EXPORT_SYMBOL_GPL(device_remove_bin_file);
+
static void klist_children_get(struct klist_node *n)
{
struct device *dev = container_of(n, struct device, knode_parent);
@@ -289,12 +398,20 @@
{
struct device *parent = NULL;
char *class_name = NULL;
+ struct class_interface *class_intf;
int error = -EINVAL;
dev = get_device(dev);
if (!dev || !strlen(dev->bus_id))
goto Error;
+ /* if this is a class device, and has no parent, create one */
+ if ((dev->class) && (dev->parent == NULL)) {
+ error = virtual_device_parent(dev);
+ if (error)
+ goto Error;
+ }
+
parent = get_device(dev->parent);
pr_debug("DEV: registering device: ID = '%s'\n", dev->bus_id);
@@ -307,6 +424,10 @@
if ((error = kobject_add(&dev->kobj)))
goto Error;
+ /* notify platform of device entry */
+ if (platform_notify)
+ platform_notify(dev);
+
dev->uevent_attr.attr.name = "uevent";
dev->uevent_attr.attr.mode = S_IWUSR;
if (dev->driver)
@@ -340,12 +461,17 @@
"subsystem");
sysfs_create_link(&dev->class->subsys.kset.kobj, &dev->kobj,
dev->bus_id);
-
- sysfs_create_link(&dev->kobj, &dev->parent->kobj, "device");
- class_name = make_class_name(dev->class->name, &dev->kobj);
- sysfs_create_link(&dev->parent->kobj, &dev->kobj, class_name);
+ if (parent) {
+ sysfs_create_link(&dev->kobj, &dev->parent->kobj, "device");
+ class_name = make_class_name(dev->class->name, &dev->kobj);
+ sysfs_create_link(&dev->parent->kobj, &dev->kobj, class_name);
+ }
}
+ if ((error = device_add_attrs(dev)))
+ goto AttrsError;
+ if ((error = device_add_groups(dev)))
+ goto GroupError;
if ((error = device_pm_add(dev)))
goto PMError;
if ((error = bus_add_device(dev)))
@@ -356,15 +482,16 @@
klist_add_tail(&dev->knode_parent, &parent->klist_children);
if (dev->class) {
- /* tie the class to the device */
down(&dev->class->sem);
+ /* tie the class to the device */
list_add_tail(&dev->node, &dev->class->devices);
+
+ /* notify any interfaces that the device is here */
+ list_for_each_entry(class_intf, &dev->class->interfaces, node)
+ if (class_intf->add_dev)
+ class_intf->add_dev(dev, class_intf);
up(&dev->class->sem);
}
-
- /* notify platform of device entry */
- if (platform_notify)
- platform_notify(dev);
Done:
kfree(class_name);
put_device(dev);
@@ -372,6 +499,10 @@
BusError:
device_pm_remove(dev);
PMError:
+ device_remove_groups(dev);
+ GroupError:
+ device_remove_attrs(dev);
+ AttrsError:
if (dev->devt_attr) {
device_remove_file(dev, dev->devt_attr);
kfree(dev->devt_attr);
@@ -449,6 +580,7 @@
{
struct device * parent = dev->parent;
char *class_name = NULL;
+ struct class_interface *class_intf;
if (parent)
klist_del(&dev->knode_parent);
@@ -458,14 +590,23 @@
sysfs_remove_link(&dev->kobj, "subsystem");
sysfs_remove_link(&dev->class->subsys.kset.kobj, dev->bus_id);
class_name = make_class_name(dev->class->name, &dev->kobj);
- sysfs_remove_link(&dev->kobj, "device");
- sysfs_remove_link(&dev->parent->kobj, class_name);
+ if (parent) {
+ sysfs_remove_link(&dev->kobj, "device");
+ sysfs_remove_link(&dev->parent->kobj, class_name);
+ }
kfree(class_name);
down(&dev->class->sem);
+ /* notify any interfaces that the device is now gone */
+ list_for_each_entry(class_intf, &dev->class->interfaces, node)
+ if (class_intf->remove_dev)
+ class_intf->remove_dev(dev, class_intf);
+ /* remove the device from the class list */
list_del_init(&dev->node);
up(&dev->class->sem);
}
device_remove_file(dev, &dev->uevent_attr);
+ device_remove_groups(dev);
+ device_remove_attrs(dev);
/* Notify the platform of the removal, in case they
* need to do anything...
@@ -579,7 +720,7 @@
* been created with a call to class_create().
*/
struct device *device_create(struct class *class, struct device *parent,
- dev_t devt, char *fmt, ...)
+ dev_t devt, const char *fmt, ...)
{
va_list args;
struct device *dev = NULL;
@@ -587,10 +728,6 @@
if (class == NULL || IS_ERR(class))
goto error;
- if (parent == NULL) {
- printk(KERN_WARNING "%s does not work yet for NULL parents\n", __FUNCTION__);
- goto error;
- }
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
@@ -644,3 +781,58 @@
device_unregister(dev);
}
EXPORT_SYMBOL_GPL(device_destroy);
+
+/**
+ * device_rename - renames a device
+ * @dev: the pointer to the struct device to be renamed
+ * @new_name: the new name of the device
+ */
+int device_rename(struct device *dev, char *new_name)
+{
+ char *old_class_name = NULL;
+ char *new_class_name = NULL;
+ char *old_symlink_name = NULL;
+ int error;
+
+ dev = get_device(dev);
+ if (!dev)
+ return -EINVAL;
+
+ pr_debug("DEVICE: renaming '%s' to '%s'\n", dev->bus_id, new_name);
+
+ if ((dev->class) && (dev->parent))
+ old_class_name = make_class_name(dev->class->name, &dev->kobj);
+
+ if (dev->class) {
+ old_symlink_name = kmalloc(BUS_ID_SIZE, GFP_KERNEL);
+ if (!old_symlink_name)
+ return -ENOMEM;
+ strlcpy(old_symlink_name, dev->bus_id, BUS_ID_SIZE);
+ }
+
+ strlcpy(dev->bus_id, new_name, BUS_ID_SIZE);
+
+ error = kobject_rename(&dev->kobj, new_name);
+
+ if (old_class_name) {
+ new_class_name = make_class_name(dev->class->name, &dev->kobj);
+ if (new_class_name) {
+ sysfs_create_link(&dev->parent->kobj, &dev->kobj,
+ new_class_name);
+ sysfs_remove_link(&dev->parent->kobj, old_class_name);
+ }
+ }
+ if (dev->class) {
+ sysfs_remove_link(&dev->class->subsys.kset.kobj,
+ old_symlink_name);
+ sysfs_create_link(&dev->class->subsys.kset.kobj, &dev->kobj,
+ dev->bus_id);
+ }
+ put_device(dev);
+
+ kfree(old_class_name);
+ kfree(new_class_name);
+ kfree(old_symlink_name);
+
+ return error;
+}
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 889c711..b5f43c3 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -17,6 +17,7 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/kthread.h>
#include "base.h"
#include "power/power.h"
@@ -38,66 +39,73 @@
*
* This function must be called with @dev->sem held.
*/
-void device_bind_driver(struct device * dev)
+int device_bind_driver(struct device *dev)
{
- if (klist_node_attached(&dev->knode_driver))
- return;
+ int ret;
+
+ if (klist_node_attached(&dev->knode_driver)) {
+ printk(KERN_WARNING "%s: device %s already bound\n",
+ __FUNCTION__, kobject_name(&dev->kobj));
+ return 0;
+ }
pr_debug("bound device '%s' to driver '%s'\n",
dev->bus_id, dev->driver->name);
klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices);
- sysfs_create_link(&dev->driver->kobj, &dev->kobj,
+ ret = sysfs_create_link(&dev->driver->kobj, &dev->kobj,
kobject_name(&dev->kobj));
- sysfs_create_link(&dev->kobj, &dev->driver->kobj, "driver");
+ if (ret == 0) {
+ ret = sysfs_create_link(&dev->kobj, &dev->driver->kobj,
+ "driver");
+ if (ret)
+ sysfs_remove_link(&dev->driver->kobj,
+ kobject_name(&dev->kobj));
+ }
+ return ret;
}
-/**
- * driver_probe_device - attempt to bind device & driver.
- * @drv: driver.
- * @dev: device.
- *
- * First, we call the bus's match function, if one present, which
- * should compare the device IDs the driver supports with the
- * device IDs of the device. Note we don't do this ourselves
- * because we don't know the format of the ID structures, nor what
- * is to be considered a match and what is not.
- *
- * This function returns 1 if a match is found, an error if one
- * occurs (that is not -ENODEV or -ENXIO), and 0 otherwise.
- *
- * This function must be called with @dev->sem held. When called
- * for a USB interface, @dev->parent->sem must be held as well.
- */
-int driver_probe_device(struct device_driver * drv, struct device * dev)
+struct stupid_thread_structure {
+ struct device_driver *drv;
+ struct device *dev;
+};
+
+static atomic_t probe_count = ATOMIC_INIT(0);
+static int really_probe(void *void_data)
{
+ struct stupid_thread_structure *data = void_data;
+ struct device_driver *drv = data->drv;
+ struct device *dev = data->dev;
int ret = 0;
- if (drv->bus->match && !drv->bus->match(dev, drv))
- goto Done;
+ atomic_inc(&probe_count);
+ pr_debug("%s: Probing driver %s with device %s\n",
+ drv->bus->name, drv->name, dev->bus_id);
- pr_debug("%s: Matched Device %s with Driver %s\n",
- drv->bus->name, dev->bus_id, drv->name);
dev->driver = drv;
if (dev->bus->probe) {
ret = dev->bus->probe(dev);
if (ret) {
dev->driver = NULL;
- goto ProbeFailed;
+ goto probe_failed;
}
} else if (drv->probe) {
ret = drv->probe(dev);
if (ret) {
dev->driver = NULL;
- goto ProbeFailed;
+ goto probe_failed;
}
}
- device_bind_driver(dev);
+ if (device_bind_driver(dev)) {
+ printk(KERN_ERR "%s: device_bind_driver(%s) failed\n",
+ __FUNCTION__, dev->bus_id);
+ /* How does undo a ->probe? We're screwed. */
+ }
ret = 1;
pr_debug("%s: Bound Device %s to Driver %s\n",
drv->bus->name, dev->bus_id, drv->name);
- goto Done;
+ goto done;
- ProbeFailed:
+probe_failed:
if (ret == -ENODEV || ret == -ENXIO) {
/* Driver matched, but didn't support device
* or device not found.
@@ -110,7 +118,71 @@
"%s: probe of %s failed with error %d\n",
drv->name, dev->bus_id, ret);
}
- Done:
+done:
+ kfree(data);
+ atomic_dec(&probe_count);
+ return ret;
+}
+
+/**
+ * driver_probe_done
+ * Determine if the probe sequence is finished or not.
+ *
+ * Should somehow figure out how to use a semaphore, not an atomic variable...
+ */
+int driver_probe_done(void)
+{
+ pr_debug("%s: probe_count = %d\n", __FUNCTION__,
+ atomic_read(&probe_count));
+ if (atomic_read(&probe_count))
+ return -EBUSY;
+ return 0;
+}
+
+/**
+ * driver_probe_device - attempt to bind device & driver together
+ * @drv: driver to bind a device to
+ * @dev: device to try to bind to the driver
+ *
+ * First, we call the bus's match function, if one present, which should
+ * compare the device IDs the driver supports with the device IDs of the
+ * device. Note we don't do this ourselves because we don't know the
+ * format of the ID structures, nor what is to be considered a match and
+ * what is not.
+ *
+ * This function returns 1 if a match is found, an error if one occurs
+ * (that is not -ENODEV or -ENXIO), and 0 otherwise.
+ *
+ * This function must be called with @dev->sem held. When called for a
+ * USB interface, @dev->parent->sem must be held as well.
+ */
+int driver_probe_device(struct device_driver * drv, struct device * dev)
+{
+ struct stupid_thread_structure *data;
+ struct task_struct *probe_task;
+ int ret = 0;
+
+ if (!device_is_registered(dev))
+ return -ENODEV;
+ if (drv->bus->match && !drv->bus->match(dev, drv))
+ goto done;
+
+ pr_debug("%s: Matched Device %s with Driver %s\n",
+ drv->bus->name, dev->bus_id, drv->name);
+
+ data = kmalloc(sizeof(*data), GFP_KERNEL);
+ data->drv = drv;
+ data->dev = dev;
+
+ if (drv->multithread_probe) {
+ probe_task = kthread_run(really_probe, data,
+ "probe-%s", dev->bus_id);
+ if (IS_ERR(probe_task))
+ ret = PTR_ERR(probe_task);
+ } else
+ ret = really_probe(data);
+
+done:
return ret;
}
@@ -139,8 +211,9 @@
down(&dev->sem);
if (dev->driver) {
- device_bind_driver(dev);
- ret = 1;
+ ret = device_bind_driver(dev);
+ if (ret == 0)
+ ret = 1;
} else
ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
up(&dev->sem);
@@ -182,9 +255,9 @@
* returns 0 and the @dev->driver is set, we've found a
* compatible pair.
*/
-void driver_attach(struct device_driver * drv)
+int driver_attach(struct device_driver * drv)
{
- bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
+ return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
}
/**
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 562600d..1214cbd 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -142,20 +142,6 @@
kobject_put(&drv->kobj);
}
-static void klist_devices_get(struct klist_node *n)
-{
- struct device *dev = container_of(n, struct device, knode_driver);
-
- get_device(dev);
-}
-
-static void klist_devices_put(struct klist_node *n)
-{
- struct device *dev = container_of(n, struct device, knode_driver);
-
- put_device(dev);
-}
-
/**
* driver_register - register driver with bus
* @drv: driver to register
@@ -175,7 +161,7 @@
(drv->bus->shutdown && drv->shutdown)) {
printk(KERN_WARNING "Driver '%s' needs updating - please use bus_type methods\n", drv->name);
}
- klist_init(&drv->klist_devices, klist_devices_get, klist_devices_put);
+ klist_init(&drv->klist_devices, NULL, NULL);
init_completion(&drv->unloaded);
return bus_add_driver(drv);
}
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 5d6c011..77bf882 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -602,7 +602,7 @@
class_unregister(&firmware_class);
}
-module_init(firmware_class_init);
+fs_initcall(firmware_class_init);
module_exit(firmware_class_exit);
EXPORT_SYMBOL(release_firmware);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 2b8755d..940ce41 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -505,12 +505,36 @@
return (strncmp(pdev->name, drv->name, BUS_ID_SIZE) == 0);
}
-static int platform_suspend(struct device * dev, pm_message_t state)
+static int platform_suspend(struct device *dev, pm_message_t mesg)
{
int ret = 0;
if (dev->driver && dev->driver->suspend)
- ret = dev->driver->suspend(dev, state);
+ ret = dev->driver->suspend(dev, mesg);
+
+ return ret;
+}
+
+static int platform_suspend_late(struct device *dev, pm_message_t mesg)
+{
+ struct platform_driver *drv = to_platform_driver(dev->driver);
+ struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+ int ret = 0;
+
+ if (dev->driver && drv->suspend_late)
+ ret = drv->suspend_late(pdev, mesg);
+
+ return ret;
+}
+
+static int platform_resume_early(struct device *dev)
+{
+ struct platform_driver *drv = to_platform_driver(dev->driver);
+ struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+ int ret = 0;
+
+ if (dev->driver && drv->resume_early)
+ ret = drv->resume_early(pdev);
return ret;
}
@@ -531,6 +555,8 @@
.match = platform_match,
.uevent = platform_uevent,
.suspend = platform_suspend,
+ .suspend_late = platform_suspend_late,
+ .resume_early = platform_resume_early,
.resume = platform_resume,
};
EXPORT_SYMBOL_GPL(platform_bus_type);
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index 826093e..020be36 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -38,13 +38,35 @@
dev_dbg(dev,"resuming\n");
error = dev->bus->resume(dev);
}
+ if (dev->class && dev->class->resume) {
+ dev_dbg(dev,"class resume\n");
+ error = dev->class->resume(dev);
+ }
up(&dev->sem);
TRACE_RESUME(error);
return error;
}
+static int resume_device_early(struct device * dev)
+{
+ int error = 0;
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);
+ if (dev->bus && dev->bus->resume_early) {
+ dev_dbg(dev,"EARLY resume\n");
+ error = dev->bus->resume_early(dev);
+ }
+ TRACE_RESUME(error);
+ return error;
+}
+
+/*
+ * Resume the devices that have either not gone through
+ * the late suspend, or that did go through it but also
+ * went through the early resume
+ */
void dpm_resume(void)
{
down(&dpm_list_sem);
@@ -74,6 +96,7 @@
void device_resume(void)
{
+ might_sleep();
down(&dpm_sem);
dpm_resume();
up(&dpm_sem);
@@ -83,12 +106,12 @@
/**
- * device_power_up_irq - Power on some devices.
+ * dpm_power_up - Power on some devices.
*
* Walk the dpm_off_irq list and power each device up. This
* is used for devices that required they be powered down with
- * interrupts disabled. As devices are powered on, they are moved to
- * the dpm_suspended list.
+ * interrupts disabled. As devices are powered on, they are moved
+ * to the dpm_active list.
*
* Interrupts must be disabled when calling this.
*/
@@ -99,16 +122,14 @@
struct list_head * entry = dpm_off_irq.next;
struct device * dev = to_device(entry);
- get_device(dev);
- list_move_tail(entry, &dpm_active);
- resume_device(dev);
- put_device(dev);
+ list_move_tail(entry, &dpm_off);
+ resume_device_early(dev);
}
}
/**
- * device_pm_power_up - Turn on all devices that need special attention.
+ * device_power_up - Turn on all devices that need special attention.
*
* Power on system devices then devices that required we shut them down
* with interrupts disabled.
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index 69509e0..ece136b 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -34,6 +34,7 @@
switch (event) {
case PM_EVENT_SUSPEND: return "suspend";
case PM_EVENT_FREEZE: return "freeze";
+ case PM_EVENT_PRETHAW: return "prethaw";
default: return "(unknown suspend event)";
}
}
@@ -65,7 +66,19 @@
dev->power.prev_state = dev->power.power_state;
- if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
+ if (dev->class && dev->class->suspend && !dev->power.power_state.event) {
+ dev_dbg(dev, "class %s%s\n",
+ suspend_verb(state.event),
+ ((state.event == PM_EVENT_SUSPEND)
+ && device_may_wakeup(dev))
+ ? ", may wakeup"
+ : ""
+ );
+ error = dev->class->suspend(dev, state);
+ suspend_report_result(dev->class->suspend, error);
+ }
+
+ if (!error && dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
dev_dbg(dev, "%s%s\n",
suspend_verb(state.event),
((state.event == PM_EVENT_SUSPEND)
@@ -81,15 +94,42 @@
}
+/*
+ * This is called with interrupts off, only a single CPU
+ * running. We can't do down() on a semaphore (and we don't
+ * need the protection)
+ */
+static int suspend_device_late(struct device *dev, pm_message_t state)
+{
+ int error = 0;
+
+ if (dev->bus && dev->bus->suspend_late && !dev->power.power_state.event) {
+ dev_dbg(dev, "LATE %s%s\n",
+ suspend_verb(state.event),
+ ((state.event == PM_EVENT_SUSPEND)
+ && device_may_wakeup(dev))
+ ? ", may wakeup"
+ : ""
+ );
+ error = dev->bus->suspend_late(dev, state);
+ suspend_report_result(dev->bus->suspend_late, error);
+ }
+ return error;
+}
+
/**
* device_suspend - Save state and stop all devices in system.
* @state: Power state to put each device in.
*
* Walk the dpm_active list, call ->suspend() for each device, and move
- * it to dpm_off.
- * Check the return value for each. If it returns 0, then we move the
- * the device to the dpm_off list. If it returns -EAGAIN, we move it to
- * the dpm_off_irq list. If we get a different error, try and back out.
+ * it to the dpm_off list.
+ *
+ * (For historical reasons, if it returns -EAGAIN, that used to mean
+ * that the device would be called again with interrupts disabled.
+ * These days, we use the "suspend_late()" callback for that, so we
+ * print a warning and consider it an error).
+ *
+ * If we get a different error, try and back out.
*
* If we hit a failure with any of the devices, call device_resume()
* above to bring the suspended devices back to life.
@@ -100,6 +140,7 @@
{
int error = 0;
+ might_sleep();
down(&dpm_sem);
down(&dpm_list_sem);
while (!list_empty(&dpm_active) && error == 0) {
@@ -115,39 +156,27 @@
/* Check if the device got removed */
if (!list_empty(&dev->power.entry)) {
- /* Move it to the dpm_off or dpm_off_irq list */
+ /* Move it to the dpm_off list */
if (!error)
list_move(&dev->power.entry, &dpm_off);
- else if (error == -EAGAIN) {
- list_move(&dev->power.entry, &dpm_off_irq);
- error = 0;
- }
}
if (error)
printk(KERN_ERR "Could not suspend device %s: "
- "error %d\n", kobject_name(&dev->kobj), error);
+ "error %d%s\n",
+ kobject_name(&dev->kobj), error,
+ error == -EAGAIN ? " (please convert to suspend_late)" : "");
put_device(dev);
}
up(&dpm_list_sem);
- if (error) {
- /* we failed... before resuming, bring back devices from
- * dpm_off_irq list back to main dpm_off list, we do want
- * to call resume() on them, in case they partially suspended
- * despite returning -EAGAIN
- */
- while (!list_empty(&dpm_off_irq)) {
- struct list_head * entry = dpm_off_irq.next;
- list_move(entry, &dpm_off);
- }
+ if (error)
dpm_resume();
- }
+
up(&dpm_sem);
return error;
}
EXPORT_SYMBOL_GPL(device_suspend);
-
/**
* device_power_down - Shut down special devices.
* @state: Power state to enter.
@@ -162,14 +191,17 @@
int error = 0;
struct device * dev;
- list_for_each_entry_reverse(dev, &dpm_off_irq, power.entry) {
- if ((error = suspend_device(dev, state)))
- break;
+ while (!list_empty(&dpm_off)) {
+ struct list_head * entry = dpm_off.prev;
+
+ dev = to_device(entry);
+ error = suspend_device_late(dev, state);
+ if (error)
+ goto Error;
+ list_move(&dev->power.entry, &dpm_off_irq);
}
- if (error)
- goto Error;
- if ((error = sysdev_suspend(state)))
- goto Error;
+
+ error = sysdev_suspend(state);
Done:
return error;
Error:
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 40d7242..2d47517 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -7,22 +7,29 @@
#include "power.h"
+#ifdef CONFIG_PM_SYSFS_DEPRECATED
+
/**
* state - Control current power state of device
*
* show() returns the current power state of the device. '0' indicates
- * the device is on. Other values (1-3) indicate the device is in a low
+ * the device is on. Other values (2) indicate the device is in some low
* power state.
*
- * store() sets the current power state, which is an integer value
- * between 0-3. If the device is on ('0'), and the value written is
- * greater than 0, then the device is placed directly into the low-power
- * state (via its driver's ->suspend() method).
- * If the device is currently in a low-power state, and the value is 0,
- * the device is powered back on (via the ->resume() method).
- * If the device is in a low-power state, and a different low-power state
- * is requested, the device is first resumed, then suspended into the new
- * low-power state.
+ * store() sets the current power state, which is an integer valued
+ * 0, 2, or 3. Devices with bus.suspend_late(), or bus.resume_early()
+ * methods fail this operation; those methods couldn't be called.
+ * Otherwise,
+ *
+ * - If the recorded dev->power.power_state.event matches the
+ * target value, nothing is done.
+ * - If the recorded event code is nonzero, the device is reactivated
+ * by calling bus.resume() and/or class.resume().
+ * - If the target value is nonzero, the device is suspended by
+ * calling class.suspend() and/or bus.suspend() with event code
+ * PM_EVENT_SUSPEND.
+ *
+ * This mechanism is DEPRECATED and should only be used for testing.
*/
static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf)
@@ -38,6 +45,10 @@
pm_message_t state;
int error = -EINVAL;
+ /* disallow incomplete suspend sequences */
+ if (dev->bus && (dev->bus->suspend_late || dev->bus->resume_early))
+ return error;
+
state.event = PM_EVENT_SUSPEND;
/* Older apps expected to write "3" here - confused with PCI D3 */
if ((n == 1) && !strcmp(buf, "3"))
@@ -57,6 +68,8 @@
static DEVICE_ATTR(state, 0644, state_show, state_store);
+#endif /* CONFIG_PM_SYSFS_DEPRECATED */
+
/*
* wakeup - Report/change current wakeup option for device
*
@@ -130,7 +143,9 @@
static struct attribute * power_attrs[] = {
+#ifdef CONFIG_PM_SYSFS_DEPRECATED
&dev_attr_state.attr,
+#endif
&dev_attr_wakeup.attr,
NULL,
};
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 7b3b94d..c774121 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -662,7 +662,8 @@
mapping_set_gfp_mask(old_file->f_mapping, lo->old_gfp_mask);
lo->lo_backing_file = file;
- lo->lo_blocksize = mapping->host->i_blksize;
+ lo->lo_blocksize = S_ISBLK(mapping->host->i_mode) ?
+ mapping->host->i_bdev->bd_block_size : PAGE_SIZE;
lo->old_gfp_mask = mapping_gfp_mask(mapping);
mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS));
complete(&p->wait);
@@ -794,7 +795,9 @@
if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write)
lo_flags |= LO_FLAGS_READ_ONLY;
- lo_blocksize = inode->i_blksize;
+ lo_blocksize = S_ISBLK(inode->i_mode) ?
+ inode->i_bdev->bd_block_size : PAGE_SIZE;
+
error = 0;
} else {
goto out_putf;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index d62b49f..45a8f40 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -358,7 +358,7 @@
static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
struct ub_scsi_cmd *cmd, struct ub_request *urq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, int uptodate);
+static void ub_end_rq(struct request *rq, unsigned int status);
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
struct ub_request *urq, struct ub_scsi_cmd *cmd);
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -639,9 +639,15 @@
struct ub_request *urq;
int n_elem;
- if (atomic_read(&sc->poison) || lun->changed) {
+ if (atomic_read(&sc->poison)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, 0);
+ ub_end_rq(rq, DID_NO_CONNECT << 16);
+ return 0;
+ }
+
+ if (lun->changed && !blk_pc_request(rq)) {
+ blkdev_dequeue_request(rq);
+ ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
return 0;
}
@@ -693,7 +699,7 @@
drop:
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, 0);
+ ub_end_rq(rq, DID_ERROR << 16);
return 0;
}
@@ -761,47 +767,53 @@
struct ub_lun *lun = cmd->lun;
struct ub_request *urq = cmd->back;
struct request *rq;
- int uptodate;
+ unsigned int scsi_status;
rq = urq->rq;
if (cmd->error == 0) {
- uptodate = 1;
-
if (blk_pc_request(rq)) {
if (cmd->act_len >= rq->data_len)
rq->data_len = 0;
else
rq->data_len -= cmd->act_len;
}
+ scsi_status = 0;
} else {
- uptodate = 0;
-
if (blk_pc_request(rq)) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
memcpy(rq->sense, sc->top_sense, UB_SENSE_SIZE);
rq->sense_len = UB_SENSE_SIZE;
if (sc->top_sense[0] != 0)
- rq->errors = SAM_STAT_CHECK_CONDITION;
+ scsi_status = SAM_STAT_CHECK_CONDITION;
else
- rq->errors = DID_ERROR << 16;
+ scsi_status = DID_ERROR << 16;
} else {
if (cmd->error == -EIO) {
if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
return;
}
+ scsi_status = SAM_STAT_CHECK_CONDITION;
}
}
urq->rq = NULL;
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, uptodate);
+ ub_end_rq(rq, scsi_status);
blk_start_queue(lun->disk->queue);
}
-static void ub_end_rq(struct request *rq, int uptodate)
+static void ub_end_rq(struct request *rq, unsigned int scsi_status)
{
+ int uptodate;
+
+ if (scsi_status == 0) {
+ uptodate = 1;
+ } else {
+ uptodate = 0;
+ rq->errors = scsi_status;
+ }
end_that_request_first(rq, uptodate, rq->hard_nr_sectors);
end_that_request_last(rq, uptodate);
}
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 52ea94b..1b21c3a 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -439,6 +439,14 @@
If you have an SGI Altix with an attached SABrick
say Y or M here, otherwise say N.
+config MSPEC
+ tristate "Memory special operations driver"
+ depends on IA64
+ help
+ If you have an ia64 and you want to enable memory special
+ operations support (formerly known as fetchop), say Y here,
+ otherwise say N.
+
source "drivers/serial/Kconfig"
config UNIX98_PTYS
@@ -739,7 +747,7 @@
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM
+ depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 8c6dfc62..b583d0c 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -47,6 +47,7 @@
obj-$(CONFIG_HVC_DRIVER) += hvc_console.o
obj-$(CONFIG_RAW_DRIVER) += raw.o
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
+obj-$(CONFIG_MSPEC) += mspec.o
obj-$(CONFIG_MMTIMER) += mmtimer.o
obj-$(CONFIG_VIOCONS) += viocons.o
obj-$(CONFIG_VIOTAPE) += viotape.o
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 8afba33..58b0eb5 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -868,8 +868,8 @@
do_div(temp, period);
hpetp->hp_tick_freq = temp; /* ticks per second */
- printk(KERN_INFO "hpet%d: at MMIO 0x%lx (virtual 0x%p), IRQ%s",
- hpetp->hp_which, hdp->hd_phys_address, hdp->hd_address,
+ printk(KERN_INFO "hpet%d: at MMIO 0x%lx, IRQ%s",
+ hpetp->hp_which, hdp->hd_phys_address,
hpetp->hp_ntimer > 1 ? "s" : "");
for (i = 0; i < hpetp->hp_ntimer; i++)
printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 917b204..4ac70ec 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -238,6 +238,32 @@
}
#endif
+#ifndef CONFIG_MMU
+static unsigned long get_unmapped_area_mem(struct file *file,
+ unsigned long addr,
+ unsigned long len,
+ unsigned long pgoff,
+ unsigned long flags)
+{
+ if (!valid_mmap_phys_addr_range(pgoff, len))
+ return (unsigned long) -EINVAL;
+ return pgoff;
+}
+
+/* can't do an in-place private mapping if there's no MMU */
+static inline int private_mapping_ok(struct vm_area_struct *vma)
+{
+ return vma->vm_flags & VM_MAYSHARE;
+}
+#else
+#define get_unmapped_area_mem NULL
+
+static inline int private_mapping_ok(struct vm_area_struct *vma)
+{
+ return 1;
+}
+#endif
+
static int mmap_mem(struct file * file, struct vm_area_struct * vma)
{
size_t size = vma->vm_end - vma->vm_start;
@@ -245,6 +271,9 @@
if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
return -EINVAL;
+ if (!private_mapping_ok(vma))
+ return -ENOSYS;
+
vma->vm_page_prot = phys_mem_access_prot(file, vma->vm_pgoff,
size,
vma->vm_page_prot);
@@ -782,6 +811,7 @@
.write = write_mem,
.mmap = mmap_mem,
.open = open_mem,
+ .get_unmapped_area = get_unmapped_area_mem,
};
static const struct file_operations kmem_fops = {
@@ -790,6 +820,7 @@
.write = write_kmem,
.mmap = mmap_kmem,
.open = open_kmem,
+ .get_unmapped_area = get_unmapped_area_mem,
};
static const struct file_operations null_fops = {
@@ -815,6 +846,10 @@
.mmap = mmap_zero,
};
+/*
+ * capabilities for /dev/zero
+ * - permits private mappings, "copies" are taken of the source of zeros
+ */
static struct backing_dev_info zero_bdi = {
.capabilities = BDI_CAP_MAP_COPY,
};
@@ -862,9 +897,13 @@
switch (iminor(inode)) {
case 1:
filp->f_op = &mem_fops;
+ filp->f_mapping->backing_dev_info =
+ &directly_mappable_cdev_bdi;
break;
case 2:
filp->f_op = &kmem_fops;
+ filp->f_mapping->backing_dev_info =
+ &directly_mappable_cdev_bdi;
break;
case 3:
filp->f_op = &null_fops;
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
new file mode 100644
index 0000000..5426b1e
--- /dev/null
+++ b/drivers/char/mspec.c
@@ -0,0 +1,421 @@
+/*
+ * Copyright (C) 2001-2006 Silicon Graphics, Inc. All rights
+ * reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+/*
+ * SN Platform Special Memory (mspec) Support
+ *
+ * This driver exports the SN special memory (mspec) facility to user
+ * processes.
+ * There are three types of memory made available thru this driver:
+ * fetchops, uncached and cached.
+ *
+ * Fetchops are atomic memory operations that are implemented in the
+ * memory controller on SGI SN hardware.
+ *
+ * Uncached are used for memory write combining feature of the ia64
+ * cpu.
+ *
+ * Cached are used for areas of memory that are used as cached addresses
+ * on our partition and used as uncached addresses from other partitions.
+ * Due to a design constraint of the SN2 Shub, you can not have processors
+ * on the same FSB perform both a cached and uncached reference to the
+ * same cache line. These special memory cached regions prevent the
+ * kernel from ever dropping in a TLB entry and therefore prevent the
+ * processor from ever speculating a cache line from this page.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/numa.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/atomic.h>
+#include <asm/tlbflush.h>
+#include <asm/uncached.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/mspec.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/io.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/shubio.h>
+
+
+#define FETCHOP_ID "SGI Fetchop,"
+#define CACHED_ID "Cached,"
+#define UNCACHED_ID "Uncached"
+#define REVISION "4.0"
+#define MSPEC_BASENAME "mspec"
+
+/*
+ * Page types allocated by the device.
+ */
+enum {
+ MSPEC_FETCHOP = 1,
+ MSPEC_CACHED,
+ MSPEC_UNCACHED
+};
+
+static int is_sn2;
+
+/*
+ * One of these structures is allocated when an mspec region is mmaped. The
+ * structure is pointed to by the vma->vm_private_data field in the vma struct.
+ * This structure is used to record the addresses of the mspec pages.
+ */
+struct vma_data {
+ atomic_t refcnt; /* Number of vmas sharing the data. */
+ spinlock_t lock; /* Serialize access to the vma. */
+ int count; /* Number of pages allocated. */
+ int type; /* Type of pages allocated. */
+ unsigned long maddr[0]; /* Array of MSPEC addresses. */
+};
+
+/* used on shub2 to clear FOP cache in the HUB */
+static unsigned long scratch_page[MAX_NUMNODES];
+#define SH2_AMO_CACHE_ENTRIES 4
+
+static inline int
+mspec_zero_block(unsigned long addr, int len)
+{
+ int status;
+
+ if (is_sn2) {
+ if (is_shub2()) {
+ int nid;
+ void *p;
+ int i;
+
+ nid = nasid_to_cnodeid(get_node_number(__pa(addr)));
+ p = (void *)TO_AMO(scratch_page[nid]);
+
+ for (i=0; i < SH2_AMO_CACHE_ENTRIES; i++) {
+ FETCHOP_LOAD_OP(p, FETCHOP_LOAD);
+ p += FETCHOP_VAR_SIZE;
+ }
+ }
+
+ status = bte_copy(0, addr & ~__IA64_UNCACHED_OFFSET, len,
+ BTE_WACQUIRE | BTE_ZERO_FILL, NULL);
+ } else {
+ memset((char *) addr, 0, len);
+ status = 0;
+ }
+ return status;
+}
+
+/*
+ * mspec_open
+ *
+ * Called when a device mapping is created by a means other than mmap
+ * (via fork, etc.). Increments the reference count on the underlying
+ * mspec data so it is not freed prematurely.
+ */
+static void
+mspec_open(struct vm_area_struct *vma)
+{
+ struct vma_data *vdata;
+
+ vdata = vma->vm_private_data;
+ atomic_inc(&vdata->refcnt);
+}
+
+/*
+ * mspec_close
+ *
+ * Called when unmapping a device mapping. Frees all mspec pages
+ * belonging to the vma.
+ */
+static void
+mspec_close(struct vm_area_struct *vma)
+{
+ struct vma_data *vdata;
+ int i, pages, result, vdata_size;
+
+ vdata = vma->vm_private_data;
+ if (!atomic_dec_and_test(&vdata->refcnt))
+ return;
+
+ pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+ vdata_size = sizeof(struct vma_data) + pages * sizeof(long);
+ for (i = 0; i < pages; i++) {
+ if (vdata->maddr[i] == 0)
+ continue;
+ /*
+ * Clear the page before sticking it back
+ * into the pool.
+ */
+ result = mspec_zero_block(vdata->maddr[i], PAGE_SIZE);
+ if (!result)
+ uncached_free_page(vdata->maddr[i]);
+ else
+ printk(KERN_WARNING "mspec_close(): "
+ "failed to zero page %i\n",
+ result);
+ }
+
+ if (vdata_size <= PAGE_SIZE)
+ kfree(vdata);
+ else
+ vfree(vdata);
+}
+
+
+/*
+ * mspec_nopfn
+ *
+ * Creates a mspec page and maps it to user space.
+ */
+static unsigned long
+mspec_nopfn(struct vm_area_struct *vma, unsigned long address)
+{
+ unsigned long paddr, maddr;
+ unsigned long pfn;
+ int index;
+ struct vma_data *vdata = vma->vm_private_data;
+
+ index = (address - vma->vm_start) >> PAGE_SHIFT;
+ maddr = (volatile unsigned long) vdata->maddr[index];
+ if (maddr == 0) {
+ maddr = uncached_alloc_page(numa_node_id());
+ if (maddr == 0)
+ return NOPFN_OOM;
+
+ spin_lock(&vdata->lock);
+ if (vdata->maddr[index] == 0) {
+ vdata->count++;
+ vdata->maddr[index] = maddr;
+ } else {
+ uncached_free_page(maddr);
+ maddr = vdata->maddr[index];
+ }
+ spin_unlock(&vdata->lock);
+ }
+
+ if (vdata->type == MSPEC_FETCHOP)
+ paddr = TO_AMO(maddr);
+ else
+ paddr = __pa(TO_CAC(maddr));
+
+ pfn = paddr >> PAGE_SHIFT;
+
+ return pfn;
+}
+
+static struct vm_operations_struct mspec_vm_ops = {
+ .open = mspec_open,
+ .close = mspec_close,
+ .nopfn = mspec_nopfn
+};
+
+/*
+ * mspec_mmap
+ *
+ * Called when mmaping the device. Initializes the vma with a fault handler
+ * and private data structure necessary to allocate, track, and free the
+ * underlying pages.
+ */
+static int
+mspec_mmap(struct file *file, struct vm_area_struct *vma, int type)
+{
+ struct vma_data *vdata;
+ int pages, vdata_size;
+
+ if (vma->vm_pgoff != 0)
+ return -EINVAL;
+
+ if ((vma->vm_flags & VM_SHARED) == 0)
+ return -EINVAL;
+
+ if ((vma->vm_flags & VM_WRITE) == 0)
+ return -EPERM;
+
+ pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+ vdata_size = sizeof(struct vma_data) + pages * sizeof(long);
+ if (vdata_size <= PAGE_SIZE)
+ vdata = kmalloc(vdata_size, GFP_KERNEL);
+ else
+ vdata = vmalloc(vdata_size);
+ if (!vdata)
+ return -ENOMEM;
+ memset(vdata, 0, vdata_size);
+
+ vdata->type = type;
+ spin_lock_init(&vdata->lock);
+ vdata->refcnt = ATOMIC_INIT(1);
+ vma->vm_private_data = vdata;
+
+ vma->vm_flags |= (VM_IO | VM_LOCKED | VM_RESERVED | VM_PFNMAP);
+ if (vdata->type == MSPEC_FETCHOP || vdata->type == MSPEC_UNCACHED)
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ vma->vm_ops = &mspec_vm_ops;
+
+ return 0;
+}
+
+static int
+fetchop_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ return mspec_mmap(file, vma, MSPEC_FETCHOP);
+}
+
+static int
+cached_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ return mspec_mmap(file, vma, MSPEC_CACHED);
+}
+
+static int
+uncached_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ return mspec_mmap(file, vma, MSPEC_UNCACHED);
+}
+
+static struct file_operations fetchop_fops = {
+ .owner = THIS_MODULE,
+ .mmap = fetchop_mmap
+};
+
+static struct miscdevice fetchop_miscdev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "sgi_fetchop",
+ .fops = &fetchop_fops
+};
+
+static struct file_operations cached_fops = {
+ .owner = THIS_MODULE,
+ .mmap = cached_mmap
+};
+
+static struct miscdevice cached_miscdev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "mspec_cached",
+ .fops = &cached_fops
+};
+
+static struct file_operations uncached_fops = {
+ .owner = THIS_MODULE,
+ .mmap = uncached_mmap
+};
+
+static struct miscdevice uncached_miscdev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "mspec_uncached",
+ .fops = &uncached_fops
+};
+
+/*
+ * mspec_init
+ *
+ * Called at boot time to initialize the mspec facility.
+ */
+static int __init
+mspec_init(void)
+{
+ int ret;
+ int nid;
+
+ /*
+ * The fetchop device only works on SN2 hardware, uncached and cached
+ * memory drivers should both be valid on all ia64 hardware
+ */
+ if (ia64_platform_is("sn2")) {
+ is_sn2 = 1;
+ if (is_shub2()) {
+ ret = -ENOMEM;
+ for_each_online_node(nid) {
+ int actual_nid;
+ int nasid;
+ unsigned long phys;
+
+ scratch_page[nid] = uncached_alloc_page(nid);
+ if (scratch_page[nid] == 0)
+ goto free_scratch_pages;
+ phys = __pa(scratch_page[nid]);
+ nasid = get_node_number(phys);
+ actual_nid = nasid_to_cnodeid(nasid);
+ if (actual_nid != nid)
+ goto free_scratch_pages;
+ }
+ }
+
+ ret = misc_register(&fetchop_miscdev);
+ if (ret) {
+ printk(KERN_ERR
+ "%s: failed to register device %i\n",
+ FETCHOP_ID, ret);
+ goto free_scratch_pages;
+ }
+ }
+ ret = misc_register(&cached_miscdev);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to register device %i\n",
+ CACHED_ID, ret);
+ if (is_sn2)
+ misc_deregister(&fetchop_miscdev);
+ goto free_scratch_pages;
+ }
+ ret = misc_register(&uncached_miscdev);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to register device %i\n",
+ UNCACHED_ID, ret);
+ misc_deregister(&cached_miscdev);
+ if (is_sn2)
+ misc_deregister(&fetchop_miscdev);
+ goto free_scratch_pages;
+ }
+
+ printk(KERN_INFO "%s %s initialized devices: %s %s %s\n",
+ MSPEC_BASENAME, REVISION, is_sn2 ? FETCHOP_ID : "",
+ CACHED_ID, UNCACHED_ID);
+
+ return 0;
+
+ free_scratch_pages:
+ for_each_node(nid) {
+ if (scratch_page[nid] != 0)
+ uncached_free_page(scratch_page[nid]);
+ }
+ return ret;
+}
+
+static void __exit
+mspec_exit(void)
+{
+ int nid;
+
+ misc_deregister(&uncached_miscdev);
+ misc_deregister(&cached_miscdev);
+ if (is_sn2) {
+ misc_deregister(&fetchop_miscdev);
+
+ for_each_node(nid) {
+ if (scratch_page[nid] != 0)
+ uncached_free_page(scratch_page[nid]);
+ }
+ }
+}
+
+module_init(mspec_init);
+module_exit(mspec_exit);
+
+MODULE_AUTHOR("Silicon Graphics, Inc. <linux-altix@sgi.com>");
+MODULE_DESCRIPTION("Driver for SGI SN special memory operations");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index fff89c2..f114d7b 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -510,6 +510,14 @@
To compile this driver as a module, choose M here: the
module will be called shwdt.
+config SH_WDT_MMAP
+ bool "Allow mmap of SH WDT"
+ default n
+ depends on SH_WDT
+ help
+ If you say Y here, user applications will be able to mmap the
+ WDT/CPG registers.
+#
# SPARC64 Architecture
config WATCHDOG_CP1XXX
diff --git a/drivers/char/watchdog/shwdt.c b/drivers/char/watchdog/shwdt.c
index 1355038..e5b8c64 100644
--- a/drivers/char/watchdog/shwdt.c
+++ b/drivers/char/watchdog/shwdt.c
@@ -27,7 +27,7 @@
#include <linux/notifier.h>
#include <linux/ioport.h>
#include <linux/fs.h>
-
+#include <linux/mm.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/watchdog.h>
@@ -125,7 +125,6 @@
/**
* sh_wdt_stop - Stop the Watchdog
- *
* Stops the watchdog.
*/
static void sh_wdt_stop(void)
@@ -141,22 +140,20 @@
/**
* sh_wdt_keepalive - Keep the Userspace Watchdog Alive
- *
* The Userspace watchdog got a KeepAlive: schedule the next heartbeat.
*/
-static void sh_wdt_keepalive(void)
+static inline void sh_wdt_keepalive(void)
{
next_heartbeat = jiffies + (heartbeat * HZ);
}
/**
* sh_wdt_set_heartbeat - Set the Userspace Watchdog heartbeat
- *
* Set the Userspace Watchdog heartbeat
*/
static int sh_wdt_set_heartbeat(int t)
{
- if ((t < 1) || (t > 3600)) /* arbitrary upper limit */
+ if (unlikely((t < 1) || (t > 3600))) /* arbitrary upper limit */
return -EINVAL;
heartbeat = t;
@@ -165,7 +162,6 @@
/**
* sh_wdt_ping - Ping the Watchdog
- *
* @data: Unused
*
* Clears overflow bit, resets timer counter.
@@ -182,14 +178,13 @@
sh_wdt_write_cnt(0);
mod_timer(&timer, next_ping_period(clock_division_ratio));
- } else {
- printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
- }
+ } else
+ printk(KERN_WARNING PFX "Heartbeat lost! Will not ping "
+ "the watchdog\n");
}
/**
* sh_wdt_open - Open the Device
- *
* @inode: inode of device
* @file: file handle of device
*
@@ -209,7 +204,6 @@
/**
* sh_wdt_close - Close the Device
- *
* @inode: inode of device
* @file: file handle of device
*
@@ -220,7 +214,8 @@
if (shwdt_expect_close == 42) {
sh_wdt_stop();
} else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ printk(KERN_CRIT PFX "Unexpected close, not "
+ "stopping watchdog!\n");
sh_wdt_keepalive();
}
@@ -232,7 +227,6 @@
/**
* sh_wdt_write - Write to Device
- *
* @file: file handle of device
* @buf: buffer to write
* @count: length of buffer
@@ -264,8 +258,56 @@
}
/**
- * sh_wdt_ioctl - Query Device
+ * sh_wdt_mmap - map WDT/CPG registers into userspace
+ * @file: file structure for the device
+ * @vma: VMA to map the registers into
*
+ * A simple mmap() implementation for the corner cases where the counter
+ * needs to be mapped in userspace directly. Due to the relatively small
+ * size of the area, neighbouring registers not necessarily tied to the
+ * CPG will also be accessible through the register page, so this remains
+ * configurable for users that really know what they're doing.
+ *
+ * Additionaly, the register page maps in the CPG register base relative
+ * to the nearest page-aligned boundary, which requires that userspace do
+ * the appropriate CPU subtype math for calculating the page offset for
+ * the counter value.
+ */
+static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ int ret = -ENOSYS;
+
+#ifdef CONFIG_SH_WDT_MMAP
+ unsigned long addr;
+
+ /* Only support the simple cases where we map in a register page. */
+ if (((vma->vm_end - vma->vm_start) != PAGE_SIZE) || vma->vm_pgoff)
+ return -EINVAL;
+
+ /*
+ * Pick WTCNT as the start, it's usually the first register after the
+ * FRQCR, and neither one are generally page-aligned out of the box.
+ */
+ addr = WTCNT & ~(PAGE_SIZE - 1);
+
+ vma->vm_flags |= VM_IO;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
+ PAGE_SIZE, vma->vm_page_prot)) {
+ printk(KERN_ERR PFX "%s: io_remap_pfn_range failed\n",
+ __FUNCTION__);
+ return -EAGAIN;
+ }
+
+ ret = 0;
+#endif
+
+ return ret;
+}
+
+/**
+ * sh_wdt_ioctl - Query Device
* @inode: inode of device
* @file: file handle of device
* @cmd: watchdog command
@@ -326,7 +368,6 @@
/**
* sh_wdt_notify_sys - Notifier Handler
- *
* @this: notifier block
* @code: notifier event
* @unused: unused
@@ -337,9 +378,8 @@
static int sh_wdt_notify_sys(struct notifier_block *this,
unsigned long code, void *unused)
{
- if (code == SYS_DOWN || code == SYS_HALT) {
+ if (code == SYS_DOWN || code == SYS_HALT)
sh_wdt_stop();
- }
return NOTIFY_DONE;
}
@@ -351,10 +391,12 @@
.ioctl = sh_wdt_ioctl,
.open = sh_wdt_open,
.release = sh_wdt_close,
+ .mmap = sh_wdt_mmap,
};
static struct watchdog_info sh_wdt_info = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = "SH WDT",
};
@@ -371,7 +413,6 @@
/**
* sh_wdt_init - Initialize module
- *
* Registers the device and notifier handler. Actual device
* initialization is handled by sh_wdt_open().
*/
@@ -381,15 +422,15 @@
if ((clock_division_ratio < 0x5) || (clock_division_ratio > 0x7)) {
clock_division_ratio = WTCSR_CKS_4096;
- printk(KERN_INFO PFX "clock_division_ratio value must be 0x5<=x<=0x7, using %d\n",
- clock_division_ratio);
+ printk(KERN_INFO PFX "clock_division_ratio value must "
+ "be 0x5<=x<=0x7, using %d\n", clock_division_ratio);
}
- if (sh_wdt_set_heartbeat(heartbeat))
- {
+ rc = sh_wdt_set_heartbeat(heartbeat);
+ if (unlikely(rc)) {
heartbeat = WATCHDOG_HEARTBEAT;
- printk(KERN_INFO PFX "heartbeat value must be 1<=x<=3600, using %d\n",
- heartbeat);
+ printk(KERN_INFO PFX "heartbeat value must "
+ "be 1<=x<=3600, using %d\n", heartbeat);
}
init_timer(&timer);
@@ -397,15 +438,16 @@
timer.data = 0;
rc = register_reboot_notifier(&sh_wdt_notifier);
- if (rc) {
- printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n", rc);
+ if (unlikely(rc)) {
+ printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n",
+ rc);
return rc;
}
rc = misc_register(&sh_wdt_miscdev);
- if (rc) {
- printk(KERN_ERR PFX "Can't register miscdev on minor=%d (err=%d)\n",
- sh_wdt_miscdev.minor, rc);
+ if (unlikely(rc)) {
+ printk(KERN_ERR PFX "Can't register miscdev on "
+ "minor=%d (err=%d)\n", sh_wdt_miscdev.minor, rc);
unregister_reboot_notifier(&sh_wdt_notifier);
return rc;
}
@@ -418,7 +460,6 @@
/**
* sh_wdt_exit - Deinitialize module
- *
* Unregisters the device and notifier handler. Actual device
* deinitialization is handled by sh_wdt_close().
*/
@@ -434,14 +475,13 @@
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
module_param(clock_division_ratio, int, 0);
-MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). Defaults to 0x7.");
+MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<=heartbeat<=3600, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
module_init(sh_wdt_init);
module_exit(sh_wdt_exit);
-
diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c
index 6078e2f..3a365e1 100644
--- a/drivers/eisa/eisa-bus.c
+++ b/drivers/eisa/eisa-bus.c
@@ -128,9 +128,23 @@
return 0;
}
+static int eisa_bus_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct eisa_device *edev = to_eisa_device(dev);
+ int i = 0;
+ int length = 0;
+
+ add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
+ "MODALIAS=" EISA_DEVICE_MODALIAS_FMT, edev->id.sig);
+ envp[i] = NULL;
+ return 0;
+}
+
struct bus_type eisa_bus_type = {
.name = "eisa",
.match = eisa_bus_match,
+ .uevent = eisa_bus_uevent,
};
int eisa_driver_register (struct eisa_driver *edrv)
@@ -160,6 +174,14 @@
static DEVICE_ATTR(enabled, S_IRUGO, eisa_show_state, NULL);
+static ssize_t eisa_show_modalias (struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct eisa_device *edev = to_eisa_device (dev);
+ return sprintf (buf, EISA_DEVICE_MODALIAS_FMT "\n", edev->id.sig);
+}
+
+static DEVICE_ATTR(modalias, S_IRUGO, eisa_show_modalias, NULL);
+
static int __init eisa_init_device (struct eisa_root_device *root,
struct eisa_device *edev,
int slot)
@@ -209,6 +231,7 @@
device_create_file (&edev->dev, &dev_attr_signature);
device_create_file (&edev->dev, &dev_attr_enabled);
+ device_create_file (&edev->dev, &dev_attr_modalias);
return 0;
}
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 06df92b..b0ee574 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -243,6 +243,7 @@
static struct i2c_driver it87_isa_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "it87-isa",
},
.attach_adapter = it87_isa_attach_adapter,
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index a6ce7ab..fa1715b 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -175,6 +175,7 @@
static struct i2c_driver lm78_isa_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "lm78-isa",
},
.attach_adapter = lm78_isa_attach_adapter,
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index ae05e48..236f9f2 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -238,6 +238,7 @@
static struct i2c_driver pc87360_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "pc87360",
},
.attach_adapter = pc87360_detect,
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 063f71c..3783af4 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -200,6 +200,7 @@
static struct i2c_driver sis5595_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "sis5595",
},
.attach_adapter = sis5595_detect,
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index b608618..a858693 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -228,6 +228,7 @@
static struct i2c_driver smsc47b397_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "smsc47b397",
},
.attach_adapter = smsc47b397_detect,
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 825e8f7..6c81b84 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -128,6 +128,7 @@
static struct i2c_driver smsc47m1_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "smsc47m1",
},
.attach_adapter = smsc47m1_detect,
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 166298f..95ae056 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -574,6 +574,7 @@
smbus_driver and isa_driver, and clients could be of either kind */
static struct i2c_driver via686a_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "via686a",
},
.attach_adapter = via686a_detect,
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 686f3de..236ccf0 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -587,6 +587,7 @@
static struct i2c_driver vt8231_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "vt8231",
},
.attach_adapter = vt8231_detect,
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 40301bc..b21d6b9 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -903,6 +903,7 @@
static struct i2c_driver w83627ehf_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "w83627ehf",
},
.attach_adapter = w83627ehf_detect,
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 79368d5..30295028 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -339,6 +339,7 @@
static struct i2c_driver w83627hf_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "w83627hf",
},
.attach_adapter = w83627hf_detect,
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 7be469e..95221b1 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -288,6 +288,7 @@
static struct i2c_driver w83781d_isa_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = "w83781d-isa",
},
.attach_adapter = w83781d_isa_attach_adapter,
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 24383af..11935f6 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -1,5 +1,5 @@
#
-# Character device configuration
+# I2C subsystem configuration
#
menu "I2C support"
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 3040801..c034820 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -53,12 +53,6 @@
tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
-config I2C_ALGO_SIBYTE
- tristate "SiByte SMBus interface"
- depends on SIBYTE_SB1xxx_SOC && I2C
- help
- Supports the SiByte SOC on-chip I2C interfaces (2 channels).
-
config I2C_ALGO_SGI
tristate "I2C SGI interfaces"
depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 867fe1f..208be04 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -6,7 +6,6 @@
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o
obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
-obj-$(CONFIG_I2C_ALGO_SIBYTE) += i2c-algo-sibyte.o
obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o
ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index ab230c0..21c36bf 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -76,17 +76,15 @@
* Raise scl line, and do checking for delays. This is necessary for slower
* devices.
*/
-static inline int sclhi(struct i2c_algo_bit_data *adap)
+static int sclhi(struct i2c_algo_bit_data *adap)
{
unsigned long start;
setscl(adap,1);
/* Not all adapters have scl sense line... */
- if (adap->getscl == NULL ) {
- udelay(adap->udelay);
- return 0;
- }
+ if (!adap->getscl)
+ goto done;
start=jiffies;
while (! getscl(adap) ) {
@@ -101,6 +99,8 @@
cond_resched();
}
DEBSTAT(printk(KERN_DEBUG "needed %ld jiffies\n", jiffies-start));
+
+done:
udelay(adap->udelay);
return 0;
}
@@ -121,7 +121,6 @@
DEBPROTO(printk(" Sr "));
setsda(adap,1);
sclhi(adap);
- udelay(adap->udelay);
sdalo(adap);
scllo(adap);
@@ -306,7 +305,7 @@
* 0 chip did not answer
* -x transmission error
*/
-static inline int try_address(struct i2c_adapter *i2c_adap,
+static int try_address(struct i2c_adapter *i2c_adap,
unsigned char addr, int retries)
{
struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
@@ -354,15 +353,11 @@
return (retval<0)? retval : -EFAULT;
/* got a better one ?? */
}
-#if 0
- /* from asm/delay.h */
- __delay(adap->mdelay * (loops_per_sec / 1000) );
-#endif
}
return wrcount;
}
-static inline int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
{
int inval;
int rdcount=0; /* counts bytes read */
@@ -412,7 +407,7 @@
* -x an error occurred (like: -EREMOTEIO if the device did not answer, or
* -ETIMEDOUT, for example if the lines are stuck...)
*/
-static inline int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
+static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
{
unsigned short flags = msg->flags;
unsigned short nak_ok = msg->flags & I2C_M_IGNORE_NAK;
@@ -517,7 +512,7 @@
/* -----exported algorithm data: ------------------------------------- */
-static struct i2c_algorithm i2c_bit_algo = {
+static const struct i2c_algorithm i2c_bit_algo = {
.master_xfer = bit_xfer,
.functionality = bit_func,
};
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index b88a6fc..9081c9f 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -355,7 +355,7 @@
return 0;
}
-static struct i2c_algorithm pca_algo = {
+static const struct i2c_algorithm pca_algo = {
.master_xfer = pca_xfer,
.functionality = pca_func,
};
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 5b24930..3b20033 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -458,7 +458,7 @@
/* -----exported algorithm data: ------------------------------------- */
-static struct i2c_algorithm pcf_algo = {
+static const struct i2c_algorithm pcf_algo = {
.master_xfer = pcf_xfer,
.functionality = pcf_func,
};
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
index 932c4fa..490d999 100644
--- a/drivers/i2c/algos/i2c-algo-sgi.c
+++ b/drivers/i2c/algos/i2c-algo-sgi.c
@@ -157,7 +157,7 @@
return I2C_FUNC_SMBUS_EMUL;
}
-static struct i2c_algorithm sgi_algo = {
+static const struct i2c_algorithm sgi_algo = {
.master_xfer = sgi_xfer,
.functionality = sgi_func,
};
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
deleted file mode 100644
index 32d41c6..0000000
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-sibyte.c i2c driver algorithms for bit-shift adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 2001,2002,2003 Broadcom Corporation
- Copyright (C) 1995-2000 Simon G. Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl>. */
-
-/* Ported for SiByte SOCs by Broadcom Corporation. */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_smbus.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-sibyte.h>
-
-/* ----- global defines ----------------------------------------------- */
-#define SMB_CSR(a,r) ((long)(a->reg_base + r))
-
-/* ----- global variables --------------------------------------------- */
-
-/* module parameters:
- */
-static int bit_scan; /* have a look at what's hanging 'round */
-
-
-static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data * data)
-{
- struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
- int data_bytes = 0;
- int error;
-
- while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- switch (size) {
- case I2C_SMBUS_QUICK:
- csr_out32((V_SMB_ADDR(addr) | (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
- V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
- break;
- case I2C_SMBUS_BYTE:
- if (read_write == I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 1;
- } else {
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- case I2C_SMBUS_BYTE_DATA:
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- if (read_write == I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 1;
- } else {
- csr_out32(V_SMB_LB(data->byte), SMB_CSR(adap, R_SMB_DATA));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- case I2C_SMBUS_WORD_DATA:
- csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
- if (read_write == I2C_SMBUS_READ) {
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
- SMB_CSR(adap, R_SMB_START));
- data_bytes = 2;
- } else {
- csr_out32(V_SMB_LB(data->word & 0xff), SMB_CSR(adap, R_SMB_DATA));
- csr_out32(V_SMB_MB(data->word >> 8), SMB_CSR(adap, R_SMB_DATA));
- csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
- SMB_CSR(adap, R_SMB_START));
- }
- break;
- default:
- return -1; /* XXXKW better error code? */
- }
-
- while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
- if (error & M_SMB_ERROR) {
- /* Clear error bit by writing a 1 */
- csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
- return -1; /* XXXKW better error code? */
- }
-
- if (data_bytes == 1)
- data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
- if (data_bytes == 2)
- data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
-
- return 0;
-}
-
-static int algo_control(struct i2c_adapter *adapter,
- unsigned int cmd, unsigned long arg)
-{
- return 0;
-}
-
-static u32 bit_func(struct i2c_adapter *adap)
-{
- return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
-}
-
-
-/* -----exported algorithm data: ------------------------------------- */
-
-static struct i2c_algorithm i2c_sibyte_algo = {
- .smbus_xfer = smbus_xfer,
- .algo_control = algo_control, /* ioctl */
- .functionality = bit_func,
-};
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
-{
- int i;
- struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
-
- /* register new adapter to i2c module... */
- i2c_adap->algo = &i2c_sibyte_algo;
-
- /* Set the frequency to 100 kHz */
- csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
- csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
-
- /* scan bus */
- if (bit_scan) {
- union i2c_smbus_data data;
- int rc;
- printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
- i2c_adap->name);
- for (i = 0x00; i < 0x7f; i++) {
- /* XXXKW is this a realistic probe? */
- rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
- I2C_SMBUS_BYTE_DATA, &data);
- if (!rc) {
- printk("(%02x)",i);
- } else
- printk(".");
- }
- printk("\n");
- }
-
- return i2c_add_adapter(i2c_adap);
-}
-
-
-int i2c_sibyte_del_bus(struct i2c_adapter *adap)
-{
- int res;
-
- if ((res = i2c_del_adapter(adap)) < 0)
- return res;
-
- return 0;
-}
-
-int __init i2c_algo_sibyte_init (void)
-{
- printk("i2c-algo-sibyte.o: i2c SiByte algorithm module\n");
- return 0;
-}
-
-
-EXPORT_SYMBOL(i2c_sibyte_add_bus);
-EXPORT_SYMBOL(i2c_sibyte_del_bus);
-
-#ifdef MODULE
-MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
-MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-module_param(bit_scan, int, 0);
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
- return i2c_algo_sibyte_init();
-}
-
-void cleanup_module(void)
-{
-}
-#endif
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 884320e..9e56c39 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -75,11 +75,11 @@
will be called i2c-amd8111.
config I2C_AU1550
- tristate "Au1550 SMBus interface"
- depends on I2C && SOC_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on I2C && (SOC_AU1550 || SOC_AU1200)
help
If you say yes to this option, support will be included for the
- Au1550 SMBus interface.
+ Au1550 and Au1200 SMBus interface.
This driver can also be built as a module. If so, the module
will be called i2c-au1550.
@@ -287,6 +287,16 @@
This driver can also be built as a module. If so, the module
will be called i2c-ocores.
+config I2C_OMAP
+ tristate "OMAP I2C adapter"
+ depends on I2C && ARCH_OMAP
+ default y if MACH_OMAP_H3 || MACH_OMAP_OSK
+ help
+ If you say yes to this option, support will be included for the
+ I2C interface on the Texas Instruments OMAP1/2 family of processors.
+ Like OMAP1510/1610/1710/5912 and OMAP242x.
+ For details see http://www.ti.com/omap.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on I2C && PARPORT
@@ -482,19 +492,19 @@
will be called i2c-via.
config I2C_VIAPRO
- tristate "VIA 82C596/82C686/823x"
+ tristate "VIA 82C596/82C686/82xx"
depends on I2C && PCI
help
If you say yes to this option, support will be included for the VIA
- 82C596/82C686/823x I2C interfaces. Specifically, the following
+ 82C596/82C686/82xx I2C interfaces. Specifically, the following
chipsets are supported:
- 82C596A/B
- 82C686A/B
- 8231
- 8233
- 8233A
- 8235
- 8237
+ VT82C596A/B
+ VT82C686A/B
+ VT8231
+ VT8233/A
+ VT8235
+ VT8237R/A
+ VT8251
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index ac56df5..493c872 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -24,6 +24,7 @@
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
+obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index d3ef46a..e75d339 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -468,7 +468,7 @@
I2C_FUNC_SMBUS_BLOCK_DATA;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = ali1535_access,
.functionality = ali1535_func,
};
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index e6f6320..33fbb47 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -367,7 +367,7 @@
release_region(ali1563_smba,ALI1563_SMB_IOSIZE);
}
-static struct i2c_algorithm ali1563_algorithm = {
+static const struct i2c_algorithm ali1563_algorithm = {
.smbus_xfer = ali1563_access,
.functionality = ali1563_func,
};
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 7a5c094..3f11b6e 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -463,7 +463,7 @@
I2C_FUNC_SMBUS_BLOCK_DATA;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = ali15x3_access,
.functionality = ali15x3_func,
};
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 1750ded..2d21afd 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -294,7 +294,7 @@
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = amd756_access,
.functionality = amd756_func,
};
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index e5ef560..0fbc718 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -316,7 +316,7 @@
I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = amd8111_access,
.functionality = amd8111_func,
};
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index d06edce..d7e7c35 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -34,8 +34,7 @@
#include <linux/errno.h>
#include <linux/i2c.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
#include "i2c-au1550.h"
@@ -118,13 +117,19 @@
/* Reset the FIFOs, clear events.
*/
- sp->psc_smbpcr = PSC_SMBPCR_DC;
+ stat = sp->psc_smbstat;
sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
au_sync();
- do {
- stat = sp->psc_smbpcr;
+
+ if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
+ sp->psc_smbpcr = PSC_SMBPCR_DC;
au_sync();
- } while ((stat & PSC_SMBPCR_DC) != 0);
+ do {
+ stat = sp->psc_smbpcr;
+ au_sync();
+ } while ((stat & PSC_SMBPCR_DC) != 0);
+ udelay(50);
+ }
/* Write out the i2c chip address and specify operation
*/
@@ -279,10 +284,10 @@
static u32
au1550_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C;
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
-static struct i2c_algorithm au1550_algo = {
+static const struct i2c_algorithm au1550_algo = {
.master_xfer = au1550_xfer,
.functionality = au1550_func,
};
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 59f8308..caa8e5c 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -196,7 +196,6 @@
.getclock = pcf_isa_getclock,
.waitforpin = pcf_isa_waitforpin,
.udelay = 10,
- .mdelay = 10,
.timeout = 100,
};
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index e0cb3b0..457d48a 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -99,7 +99,6 @@
.getsda = hydra_bit_getsda,
.getscl = hydra_bit_getscl,
.udelay = 5,
- .mdelay = 5,
.timeout = HZ
};
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 7be1d0a..bbb2fbe 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -434,7 +434,7 @@
| (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0);
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = i801_access,
.functionality = i801_func,
};
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
index 748be30..b66fb6b 100644
--- a/drivers/i2c/busses/i2c-i810.c
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -166,7 +166,6 @@
.getsda = bit_i810i2c_getsda,
.getscl = bit_i810i2c_getscl,
.udelay = CYCLE_DELAY,
- .mdelay = CYCLE_DELAY,
.timeout = TIMEOUT,
};
@@ -182,7 +181,6 @@
.getsda = bit_i810ddc_getsda,
.getscl = bit_i810ddc_getscl,
.udelay = CYCLE_DELAY,
- .mdelay = CYCLE_DELAY,
.timeout = TIMEOUT,
};
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 0599bbd..5bccb5d 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -625,7 +625,7 @@
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
}
-static struct i2c_algorithm iic_algo = {
+static const struct i2c_algorithm iic_algo = {
.master_xfer = iic_xfer,
.functionality = iic_func
};
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 48c5693..8e41315 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -401,7 +401,7 @@
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
-static struct i2c_algorithm iop3xx_i2c_algo = {
+static const struct i2c_algorithm iop3xx_i2c_algo = {
.master_xfer = iop3xx_i2c_master_xfer,
.algo_control = iop3xx_i2c_algo_control,
.functionality = iop3xx_i2c_func,
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index c3e1d3e8..4380653 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -43,7 +43,7 @@
static u32 isa_func(struct i2c_adapter *adapter);
/* This is the actual algorithm we define */
-static struct i2c_algorithm isa_algorithm = {
+static const struct i2c_algorithm isa_algorithm = {
.functionality = isa_func,
};
@@ -89,9 +89,14 @@
dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->driver.name);
/* Now look for clients */
- driver->attach_adapter(&isa_adapter);
-
- return 0;
+ res = driver->attach_adapter(&isa_adapter);
+ if (res) {
+ dev_err(&isa_adapter.dev,
+ "Driver %s failed to attach adapter, unregistering\n",
+ driver->driver.name);
+ driver_unregister(&driver->driver);
+ }
+ return res;
}
int i2c_isa_del_driver(struct i2c_driver *driver)
@@ -125,6 +130,8 @@
static int __init i2c_isa_init(void)
{
+ int err;
+
mutex_init(&isa_adapter.clist_lock);
INIT_LIST_HEAD(&isa_adapter.clients);
@@ -133,8 +140,16 @@
sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr);
isa_adapter.dev.driver = &i2c_adapter_driver;
isa_adapter.dev.release = &i2c_adapter_dev_release;
- device_register(&isa_adapter.dev);
- device_create_file(&isa_adapter.dev, &dev_attr_name);
+ err = device_register(&isa_adapter.dev);
+ if (err) {
+ printk(KERN_ERR "i2c-isa: Failed to register device\n");
+ goto exit;
+ }
+ err = device_create_file(&isa_adapter.dev, &dev_attr_name);
+ if (err) {
+ printk(KERN_ERR "i2c-isa: Failed to create name file\n");
+ goto exit_unregister;
+ }
/* Add this adapter to the i2c_adapter class */
memset(&isa_adapter.class_dev, 0x00, sizeof(struct class_device));
@@ -142,11 +157,24 @@
isa_adapter.class_dev.class = &i2c_adapter_class;
strlcpy(isa_adapter.class_dev.class_id, isa_adapter.dev.bus_id,
BUS_ID_SIZE);
- class_device_register(&isa_adapter.class_dev);
+ err = class_device_register(&isa_adapter.class_dev);
+ if (err) {
+ printk(KERN_ERR "i2c-isa: Failed to register class device\n");
+ goto exit_remove_name;
+ }
dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name);
return 0;
+
+exit_remove_name:
+ device_remove_file(&isa_adapter.dev, &dev_attr_name);
+exit_unregister:
+ init_completion(&isa_adapter.dev_released); /* Needed? */
+ device_unregister(&isa_adapter.dev);
+ wait_for_completion(&isa_adapter.dev_released);
+exit:
+ return err;
}
static void __exit i2c_isa_exit(void)
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index cd6f45d..dd3f4cd 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -114,7 +114,6 @@
drv_data->algo_data.getsda = ixp2000_bit_getsda;
drv_data->algo_data.getscl = ixp2000_bit_getscl;
drv_data->algo_data.udelay = 6;
- drv_data->algo_data.mdelay = 6;
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP2000,
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index 2ed0711..ab57325 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -122,7 +122,6 @@
drv_data->algo_data.getsda = ixp4xx_bit_getsda;
drv_data->algo_data.getscl = ixp4xx_bit_getscl;
drv_data->algo_data.udelay = 10;
- drv_data->algo_data.mdelay = 10;
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP4XX;
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 377ab40..155a986 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -272,7 +272,7 @@
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
-static struct i2c_algorithm mpc_algo = {
+static const struct i2c_algorithm mpc_algo = {
.master_xfer = mpc_xfer,
.functionality = mpc_functionality,
};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index ac5cde1..eacbaf7 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -431,7 +431,7 @@
return num;
}
-static struct i2c_algorithm mv64xxx_i2c_algo = {
+static const struct i2c_algorithm mv64xxx_i2c_algo = {
.master_xfer = mv64xxx_i2c_xfer,
.functionality = mv64xxx_i2c_functionality,
};
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 604b49e..e0292e4 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -109,7 +109,7 @@
static u32 nforce2_func(struct i2c_adapter *adapter);
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = nforce2_access,
.functionality = nforce2_func,
};
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 5928240..952a28d 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -199,7 +199,7 @@
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
-static struct i2c_algorithm ocores_algorithm = {
+static const struct i2c_algorithm ocores_algorithm = {
.master_xfer = ocores_xfer,
.functionality = ocores_func,
};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
new file mode 100644
index 0000000..81d87d2
--- /dev/null
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -0,0 +1,676 @@
+/*
+ * TI OMAP I2C master mode driver
+ *
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * Updated to work with multiple I2C interfaces on 24xx by
+ * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
+ * Copyright (C) 2005 Nokia Corporation
+ *
+ * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+/* timeout waiting for the controller to respond */
+#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
+
+#define OMAP_I2C_REV_REG 0x00
+#define OMAP_I2C_IE_REG 0x04
+#define OMAP_I2C_STAT_REG 0x08
+#define OMAP_I2C_IV_REG 0x0c
+#define OMAP_I2C_SYSS_REG 0x10
+#define OMAP_I2C_BUF_REG 0x14
+#define OMAP_I2C_CNT_REG 0x18
+#define OMAP_I2C_DATA_REG 0x1c
+#define OMAP_I2C_SYSC_REG 0x20
+#define OMAP_I2C_CON_REG 0x24
+#define OMAP_I2C_OA_REG 0x28
+#define OMAP_I2C_SA_REG 0x2c
+#define OMAP_I2C_PSC_REG 0x30
+#define OMAP_I2C_SCLL_REG 0x34
+#define OMAP_I2C_SCLH_REG 0x38
+#define OMAP_I2C_SYSTEST_REG 0x3c
+
+/* I2C Interrupt Enable Register (OMAP_I2C_IE): */
+#define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */
+#define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */
+#define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */
+#define OMAP_I2C_IE_NACK (1 << 1) /* No ack interrupt enable */
+#define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */
+
+/* I2C Status Register (OMAP_I2C_STAT): */
+#define OMAP_I2C_STAT_SBD (1 << 15) /* Single byte data */
+#define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */
+#define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */
+#define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
+#define OMAP_I2C_STAT_AAS (1 << 9) /* Address as slave */
+#define OMAP_I2C_STAT_AD0 (1 << 8) /* Address zero */
+#define OMAP_I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
+#define OMAP_I2C_STAT_RRDY (1 << 3) /* Receive data ready */
+#define OMAP_I2C_STAT_ARDY (1 << 2) /* Register access ready */
+#define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */
+#define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */
+
+/* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
+#define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */
+#define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */
+
+/* I2C Configuration Register (OMAP_I2C_CON): */
+#define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */
+#define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */
+#define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */
+#define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */
+#define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */
+#define OMAP_I2C_CON_XA (1 << 8) /* Expand address */
+#define OMAP_I2C_CON_RM (1 << 2) /* Repeat mode (master only) */
+#define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */
+#define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */
+
+/* I2C System Test Register (OMAP_I2C_SYSTEST): */
+#ifdef DEBUG
+#define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
+#define OMAP_I2C_SYSTEST_FREE (1 << 14) /* Free running mode */
+#define OMAP_I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
+#define OMAP_I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
+#define OMAP_I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense in */
+#define OMAP_I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive out */
+#define OMAP_I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense in */
+#define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */
+#endif
+
+/* I2C System Status register (OMAP_I2C_SYSS): */
+#define OMAP_I2C_SYSS_RDONE (1 << 0) /* Reset Done */
+
+/* I2C System Configuration Register (OMAP_I2C_SYSC): */
+#define OMAP_I2C_SYSC_SRST (1 << 1) /* Soft Reset */
+
+/* REVISIT: Use platform_data instead of module parameters */
+/* Fast Mode = 400 kHz, Standard = 100 kHz */
+static int clock = 100; /* Default: 100 kHz */
+module_param(clock, int, 0);
+MODULE_PARM_DESC(clock, "Set I2C clock in kHz: 400=fast mode (default == 100)");
+
+struct omap_i2c_dev {
+ struct device *dev;
+ void __iomem *base; /* virtual */
+ int irq;
+ struct clk *iclk; /* Interface clock */
+ struct clk *fclk; /* Functional clock */
+ struct completion cmd_complete;
+ struct resource *ioarea;
+ u16 cmd_err;
+ u8 *buf;
+ size_t buf_len;
+ struct i2c_adapter adapter;
+ unsigned rev1:1;
+};
+
+static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
+ int reg, u16 val)
+{
+ __raw_writew(val, i2c_dev->base + reg);
+}
+
+static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
+{
+ return __raw_readw(i2c_dev->base + reg);
+}
+
+static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
+{
+ if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+ dev->iclk = clk_get(dev->dev, "i2c_ick");
+ if (IS_ERR(dev->iclk)) {
+ dev->iclk = NULL;
+ return -ENODEV;
+ }
+ }
+
+ dev->fclk = clk_get(dev->dev, "i2c_fck");
+ if (IS_ERR(dev->fclk)) {
+ if (dev->iclk != NULL) {
+ clk_put(dev->iclk);
+ dev->iclk = NULL;
+ }
+ dev->fclk = NULL;
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
+{
+ clk_put(dev->fclk);
+ dev->fclk = NULL;
+ if (dev->iclk != NULL) {
+ clk_put(dev->iclk);
+ dev->iclk = NULL;
+ }
+}
+
+static void omap_i2c_enable_clocks(struct omap_i2c_dev *dev)
+{
+ if (dev->iclk != NULL)
+ clk_enable(dev->iclk);
+ clk_enable(dev->fclk);
+}
+
+static void omap_i2c_disable_clocks(struct omap_i2c_dev *dev)
+{
+ if (dev->iclk != NULL)
+ clk_disable(dev->iclk);
+ clk_disable(dev->fclk);
+}
+
+static int omap_i2c_init(struct omap_i2c_dev *dev)
+{
+ u16 psc = 0;
+ unsigned long fclk_rate = 12000000;
+ unsigned long timeout;
+
+ if (!dev->rev1) {
+ omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
+ /* For some reason we need to set the EN bit before the
+ * reset done bit gets set. */
+ timeout = jiffies + OMAP_I2C_TIMEOUT;
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+ while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
+ OMAP_I2C_SYSS_RDONE)) {
+ if (time_after(jiffies, timeout)) {
+ dev_warn(dev->dev, "timeout waiting"
+ "for controller reset\n");
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ }
+ }
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+
+ if (cpu_class_is_omap1()) {
+ struct clk *armxor_ck;
+
+ armxor_ck = clk_get(NULL, "armxor_ck");
+ if (IS_ERR(armxor_ck))
+ dev_warn(dev->dev, "Could not get armxor_ck\n");
+ else {
+ fclk_rate = clk_get_rate(armxor_ck);
+ clk_put(armxor_ck);
+ }
+ /* TRM for 5912 says the I2C clock must be prescaled to be
+ * between 7 - 12 MHz. The XOR input clock is typically
+ * 12, 13 or 19.2 MHz. So we should have code that produces:
+ *
+ * XOR MHz Divider Prescaler
+ * 12 1 0
+ * 13 2 1
+ * 19.2 2 1
+ */
+ if (fclk_rate > 16000000)
+ psc = (fclk_rate + 8000000) / 12000000;
+ }
+
+ /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
+ omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
+
+ /* Program desired operating rate */
+ fclk_rate /= (psc + 1) * 1000;
+ if (psc > 2)
+ psc = 2;
+
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG,
+ fclk_rate / (clock * 2) - 7 + psc);
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG,
+ fclk_rate / (clock * 2) - 7 + psc);
+
+ /* Take the I2C module out of reset: */
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+
+ /* Enable interrupts */
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
+ (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+ OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
+ OMAP_I2C_IE_AL));
+ return 0;
+}
+
+/*
+ * Waiting on Bus Busy
+ */
+static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + OMAP_I2C_TIMEOUT;
+ while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
+ if (time_after(jiffies, timeout)) {
+ dev_warn(dev->dev, "timeout waiting for bus ready\n");
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ }
+
+ return 0;
+}
+
+/*
+ * Low level master read/write transaction.
+ */
+static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
+ struct i2c_msg *msg, int stop)
+{
+ struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+ int r;
+ u16 w;
+
+ dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
+ msg->addr, msg->len, msg->flags, stop);
+
+ if (msg->len == 0)
+ return -EINVAL;
+
+ omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr);
+
+ /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
+ dev->buf = msg->buf;
+ dev->buf_len = msg->len;
+
+ omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
+
+ init_completion(&dev->cmd_complete);
+ dev->cmd_err = 0;
+
+ w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
+ if (msg->flags & I2C_M_TEN)
+ w |= OMAP_I2C_CON_XA;
+ if (!(msg->flags & I2C_M_RD))
+ w |= OMAP_I2C_CON_TRX;
+ if (stop)
+ w |= OMAP_I2C_CON_STP;
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
+
+ r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
+ OMAP_I2C_TIMEOUT);
+ dev->buf_len = 0;
+ if (r < 0)
+ return r;
+ if (r == 0) {
+ dev_err(dev->dev, "controller timed out\n");
+ omap_i2c_init(dev);
+ return -ETIMEDOUT;
+ }
+
+ if (likely(!dev->cmd_err))
+ return 0;
+
+ /* We have an error */
+ if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
+ OMAP_I2C_STAT_XUDF)) {
+ omap_i2c_init(dev);
+ return -EIO;
+ }
+
+ if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
+ if (msg->flags & I2C_M_IGNORE_NAK)
+ return 0;
+ if (stop) {
+ w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
+ w |= OMAP_I2C_CON_STP;
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
+ }
+ return -EREMOTEIO;
+ }
+ return -EIO;
+}
+
+
+/*
+ * Prepare controller for a transaction and call omap_i2c_xfer_msg
+ * to do the work during IRQ processing.
+ */
+static int
+omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+ struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+ int i;
+ int r;
+
+ omap_i2c_enable_clocks(dev);
+
+ /* REVISIT: initialize and use adap->retries. This is an optional
+ * feature */
+ if ((r = omap_i2c_wait_for_bb(dev)) < 0)
+ goto out;
+
+ for (i = 0; i < num; i++) {
+ r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
+ if (r != 0)
+ break;
+ }
+
+ if (r == 0)
+ r = num;
+out:
+ omap_i2c_disable_clocks(dev);
+ return r;
+}
+
+static u32
+omap_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static inline void
+omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err)
+{
+ dev->cmd_err |= err;
+ complete(&dev->cmd_complete);
+}
+
+static inline void
+omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
+{
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
+}
+
+static irqreturn_t
+omap_i2c_rev1_isr(int this_irq, void *dev_id, struct pt_regs *regs)
+{
+ struct omap_i2c_dev *dev = dev_id;
+ u16 iv, w;
+
+ iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
+ switch (iv) {
+ case 0x00: /* None */
+ break;
+ case 0x01: /* Arbitration lost */
+ dev_err(dev->dev, "Arbitration lost\n");
+ omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
+ break;
+ case 0x02: /* No acknowledgement */
+ omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
+ break;
+ case 0x03: /* Register access ready */
+ omap_i2c_complete_cmd(dev, 0);
+ break;
+ case 0x04: /* Receive data ready */
+ if (dev->buf_len) {
+ w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
+ *dev->buf++ = w;
+ dev->buf_len--;
+ if (dev->buf_len) {
+ *dev->buf++ = w >> 8;
+ dev->buf_len--;
+ }
+ } else
+ dev_err(dev->dev, "RRDY IRQ while no data requested\n");
+ break;
+ case 0x05: /* Transmit data ready */
+ if (dev->buf_len) {
+ w = *dev->buf++;
+ dev->buf_len--;
+ if (dev->buf_len) {
+ w |= *dev->buf++ << 8;
+ dev->buf_len--;
+ }
+ omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
+ } else
+ dev_err(dev->dev, "XRDY IRQ while no data to send\n");
+ break;
+ default:
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+omap_i2c_isr(int this_irq, void *dev_id, struct pt_regs *regs)
+{
+ struct omap_i2c_dev *dev = dev_id;
+ u16 bits;
+ u16 stat, w;
+ int count = 0;
+
+ bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+ while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
+ dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
+ if (count++ == 100) {
+ dev_warn(dev->dev, "Too much work in one IRQ\n");
+ break;
+ }
+
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
+
+ if (stat & OMAP_I2C_STAT_ARDY) {
+ omap_i2c_complete_cmd(dev, 0);
+ continue;
+ }
+ if (stat & OMAP_I2C_STAT_RRDY) {
+ w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
+ if (dev->buf_len) {
+ *dev->buf++ = w;
+ dev->buf_len--;
+ if (dev->buf_len) {
+ *dev->buf++ = w >> 8;
+ dev->buf_len--;
+ }
+ } else
+ dev_err(dev->dev, "RRDY IRQ while no data"
+ "requested\n");
+ omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY);
+ continue;
+ }
+ if (stat & OMAP_I2C_STAT_XRDY) {
+ w = 0;
+ if (dev->buf_len) {
+ w = *dev->buf++;
+ dev->buf_len--;
+ if (dev->buf_len) {
+ w |= *dev->buf++ << 8;
+ dev->buf_len--;
+ }
+ } else
+ dev_err(dev->dev, "XRDY IRQ while no"
+ "data to send\n");
+ omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
+ omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY);
+ continue;
+ }
+ if (stat & OMAP_I2C_STAT_ROVR) {
+ dev_err(dev->dev, "Receive overrun\n");
+ dev->cmd_err |= OMAP_I2C_STAT_ROVR;
+ }
+ if (stat & OMAP_I2C_STAT_XUDF) {
+ dev_err(dev->dev, "Transmit overflow\n");
+ dev->cmd_err |= OMAP_I2C_STAT_XUDF;
+ }
+ if (stat & OMAP_I2C_STAT_NACK) {
+ omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
+ OMAP_I2C_CON_STP);
+ }
+ if (stat & OMAP_I2C_STAT_AL) {
+ dev_err(dev->dev, "Arbitration lost\n");
+ omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
+ }
+ }
+
+ return count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static const struct i2c_algorithm omap_i2c_algo = {
+ .master_xfer = omap_i2c_xfer,
+ .functionality = omap_i2c_func,
+};
+
+static int
+omap_i2c_probe(struct platform_device *pdev)
+{
+ struct omap_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ struct resource *mem, *irq, *ioarea;
+ int r;
+
+ /* NOTE: driver uses the static register mapping */
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ return -ENODEV;
+ }
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -ENODEV;
+ }
+
+ ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "I2C region already claimed\n");
+ return -EBUSY;
+ }
+
+ if (clock > 200)
+ clock = 400; /* Fast mode */
+ else
+ clock = 100; /* Standard mode */
+
+ dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+ dev->dev = &pdev->dev;
+ dev->irq = irq->start;
+ dev->base = (void __iomem *) IO_ADDRESS(mem->start);
+ platform_set_drvdata(pdev, dev);
+
+ if ((r = omap_i2c_get_clocks(dev)) != 0)
+ goto err_free_mem;
+
+ omap_i2c_enable_clocks(dev);
+
+ if (cpu_is_omap15xx())
+ dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
+
+ /* reset ASAP, clearing any IRQs */
+ omap_i2c_init(dev);
+
+ r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
+ 0, pdev->name, dev);
+
+ if (r) {
+ dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
+ goto err_unuse_clocks;
+ }
+ r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
+ dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
+ pdev->id, r >> 4, r & 0xf, clock);
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_HWMON;
+ strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
+ adap->algo = &omap_i2c_algo;
+ adap->dev.parent = &pdev->dev;
+
+ /* i2c device drivers may be active on return from add_adapter() */
+ r = i2c_add_adapter(adap);
+ if (r) {
+ dev_err(dev->dev, "failure adding adapter\n");
+ goto err_free_irq;
+ }
+
+ omap_i2c_disable_clocks(dev);
+
+ return 0;
+
+err_free_irq:
+ free_irq(dev->irq, dev);
+err_unuse_clocks:
+ omap_i2c_disable_clocks(dev);
+ omap_i2c_put_clocks(dev);
+err_free_mem:
+ platform_set_drvdata(pdev, NULL);
+ kfree(dev);
+err_release_region:
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+ release_mem_region(mem->start, (mem->end - mem->start) + 1);
+
+ return r;
+}
+
+static int
+omap_i2c_remove(struct platform_device *pdev)
+{
+ struct omap_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct resource *mem;
+
+ platform_set_drvdata(pdev, NULL);
+
+ free_irq(dev->irq, dev);
+ i2c_del_adapter(&dev->adapter);
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+ omap_i2c_put_clocks(dev);
+ kfree(dev);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ return 0;
+}
+
+static struct platform_driver omap_i2c_driver = {
+ .probe = omap_i2c_probe,
+ .remove = omap_i2c_remove,
+ .driver = {
+ .name = "i2c_omap",
+ .owner = THIS_MODULE,
+ },
+};
+
+/* I2C may be needed to bring up other drivers */
+static int __init
+omap_i2c_init_driver(void)
+{
+ return platform_driver_register(&omap_i2c_driver);
+}
+subsys_initcall(omap_i2c_init_driver);
+
+static void __exit omap_i2c_exit_driver(void)
+{
+ platform_driver_unregister(&omap_i2c_driver);
+}
+module_exit(omap_i2c_exit_driver);
+
+MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
+MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index e09ebbb..5eb2bd2 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -103,7 +103,6 @@
.getsda = parport_getsda,
.getscl = parport_getscl,
.udelay = 50,
- .mdelay = 50,
.timeout = HZ,
};
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 934bd55..48a8294 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -138,7 +138,6 @@
.getsda = parport_getsda,
.getscl = parport_getscl,
.udelay = 60,
- .mdelay = 60,
.timeout = HZ,
};
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 8f2f65b..30c7a1b 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -376,7 +376,7 @@
I2C_FUNC_SMBUS_BLOCK_DATA;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = piix4_access,
.functionality = piix4_func,
};
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index d658d91..a508cb9 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -175,7 +175,7 @@
}
/* For now, we only handle smbus */
-static struct i2c_algorithm i2c_powermac_algorithm = {
+static const struct i2c_algorithm i2c_powermac_algorithm = {
.smbus_xfer = i2c_powermac_smbus_xfer,
.master_xfer = i2c_powermac_master_xfer,
.functionality = i2c_powermac_func,
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
index 9479525..7745e21 100644
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -180,7 +180,6 @@
p->algo.getsda = bit_s3via_getsda;
p->algo.getscl = bit_s3via_getscl;
p->algo.udelay = CYCLE_DELAY;
- p->algo.mdelay = CYCLE_DELAY;
p->algo.timeout = TIMEOUT;
p->algo.data = p;
p->mmvga = mmvga;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index ee114b4..cd4ad98 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -926,7 +926,7 @@
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
-static struct i2c_algorithm i2c_pxa_algorithm = {
+static const struct i2c_algorithm i2c_pxa_algorithm = {
.master_xfer = i2c_pxa_xfer,
.functionality = i2c_pxa_functionality,
};
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5d2950e..9ebe429 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -566,7 +566,7 @@
/* i2c bus registration info */
-static struct i2c_algorithm s3c24xx_i2c_algorithm = {
+static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
.master_xfer = s3c24xx_i2c_xfer,
.functionality = s3c24xx_i2c_func,
};
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index 0c85182..209f47e 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -140,7 +140,6 @@
.getsda = bit_savi2c_getsda,
.getscl = bit_savi2c_getscl,
.udelay = CYCLE_DELAY,
- .mdelay = CYCLE_DELAY,
.timeout = TIMEOUT
};
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index fa503ed..8f2b1f0 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -1,6 +1,7 @@
/*
* Copyright (C) 2004 Steven J. Hill
* Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 1995-2000 Simon G. Vogl
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -17,11 +18,162 @@
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/i2c-algo-sibyte.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <asm/io.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_smbus.h>
+
+struct i2c_algo_sibyte_data {
+ void *data; /* private data */
+ int bus; /* which bus */
+ void *reg_base; /* CSR base */
+};
+
+/* ----- global defines ----------------------------------------------- */
+#define SMB_CSR(a,r) ((long)(a->reg_base + r))
+
+/* ----- global variables --------------------------------------------- */
+
+/* module parameters:
+ */
+static int bit_scan; /* have a look at what's hanging 'round */
+module_param(bit_scan, int, 0);
+MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
+
+
+static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data * data)
+{
+ struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+ int data_bytes = 0;
+ int error;
+
+ while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ csr_out32((V_SMB_ADDR(addr) |
+ (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
+ V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
+ break;
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 1;
+ } else {
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ if (read_write == I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 1;
+ } else {
+ csr_out32(V_SMB_LB(data->byte),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+ if (read_write == I2C_SMBUS_READ) {
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ data_bytes = 2;
+ } else {
+ csr_out32(V_SMB_LB(data->word & 0xff),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32(V_SMB_MB(data->word >> 8),
+ SMB_CSR(adap, R_SMB_DATA));
+ csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(adap, R_SMB_START));
+ }
+ break;
+ default:
+ return -1; /* XXXKW better error code? */
+ }
+
+ while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
+ if (error & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
+ return -1; /* XXXKW better error code? */
+ }
+
+ if (data_bytes == 1)
+ data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
+ if (data_bytes == 2)
+ data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
+
+ return 0;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+ return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
+}
+
+
+/* -----exported algorithm data: ------------------------------------- */
+
+static const struct i2c_algorithm i2c_sibyte_algo = {
+ .smbus_xfer = smbus_xfer,
+ .functionality = bit_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+{
+ int i;
+ struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+
+ /* register new adapter to i2c module... */
+ i2c_adap->algo = &i2c_sibyte_algo;
+
+ /* Set the frequency to 100 kHz */
+ csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
+ csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
+
+ /* scan bus */
+ if (bit_scan) {
+ union i2c_smbus_data data;
+ int rc;
+ printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
+ i2c_adap->name);
+ for (i = 0x00; i < 0x7f; i++) {
+ /* XXXKW is this a realistic probe? */
+ rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &data);
+ if (!rc) {
+ printk("(%02x)",i);
+ } else
+ printk(".");
+ }
+ printk("\n");
+ }
+
+ return i2c_add_adapter(i2c_adap);
+}
+
+
static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
{ NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
{ NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
@@ -58,13 +210,13 @@
static void __exit i2c_sibyte_exit(void)
{
- i2c_sibyte_del_bus(&sibyte_board_adapter[0]);
- i2c_sibyte_del_bus(&sibyte_board_adapter[1]);
+ i2c_del_bus(&sibyte_board_adapter[0]);
+ i2c_del_bus(&sibyte_board_adapter[1]);
}
module_init(i2c_sibyte_init);
module_exit(i2c_sibyte_exit);
-MODULE_AUTHOR("Kip Walker <kwalker@broadcom.com>, Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Kip Walker (Broadcom Corp.), Steven J. Hill <sjhill@realitydiluted.com>");
MODULE_DESCRIPTION("SMBus adapter routines for SiByte boards");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index b57ab74d..38bbfd8 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -358,7 +358,7 @@
I2C_FUNC_SMBUS_PROC_CALL;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = sis5595_access,
.functionality = sis5595_func,
};
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index acb75e2..dec0baf 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -450,7 +450,7 @@
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = sis630_access,
.functionality = sis630_func,
};
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 1a73c05..7fd07fb 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -242,7 +242,7 @@
I2C_FUNC_SMBUS_PROC_CALL;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = sis96x_access,
.functionality = sis96x_func,
};
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index 73f481e..a54adc5 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -27,6 +27,10 @@
#include <linux/errno.h>
#include <linux/i2c.h>
+static unsigned short chip_addr;
+module_param(chip_addr, ushort, S_IRUGO);
+MODULE_PARM_DESC(chip_addr, "Chip address (between 0x03 and 0x77)\n");
+
static u8 stub_pointer;
static u8 stub_bytes[256];
static u16 stub_words[256];
@@ -37,6 +41,9 @@
{
s32 ret;
+ if (addr != chip_addr)
+ return -ENODEV;
+
switch (size) {
case I2C_SMBUS_QUICK:
@@ -108,7 +115,7 @@
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.functionality = stub_func,
.smbus_xfer = stub_xfer,
};
@@ -122,7 +129,17 @@
static int __init i2c_stub_init(void)
{
- printk(KERN_INFO "i2c-stub loaded\n");
+ if (!chip_addr) {
+ printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
+ return -ENODEV;
+ }
+ if (chip_addr < 0x03 || chip_addr > 0x77) {
+ printk(KERN_ERR "i2c-stub: Invalid chip address 0x%02x\n",
+ chip_addr);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n", chip_addr);
return i2c_add_adapter(&stub_adapter);
}
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 484bbac..910e200 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -81,7 +81,6 @@
.getsda = bit_via_getsda,
.getscl = bit_via_getscl,
.udelay = 5,
- .mdelay = 5,
.timeout = HZ
};
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 47e52bf..efc6bbf 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -34,6 +34,8 @@
VT8233A 0x3147 yes?
VT8235 0x3177 yes
VT8237R 0x3227 yes
+ VT8237A 0x3337 yes
+ VT8251 0x3287 yes
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -297,7 +299,7 @@
return func;
}
-static struct i2c_algorithm smbus_algorithm = {
+static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = vt596_access,
.functionality = vt596_func,
};
@@ -381,7 +383,9 @@
dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
switch (pdev->device) {
+ case PCI_DEVICE_ID_VIA_8251:
case PCI_DEVICE_ID_VIA_8237:
+ case PCI_DEVICE_ID_VIA_8237A:
case PCI_DEVICE_ID_VIA_8235:
case PCI_DEVICE_ID_VIA_8233A:
case PCI_DEVICE_ID_VIA_8233_0:
@@ -432,8 +436,12 @@
.driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237),
.driver_data = SMBBA3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A),
+ .driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4),
.driver_data = SMBBA1 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251),
+ .driver_data = SMBBA3 },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index b675773..6c8d251 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -160,7 +160,6 @@
.getsda = bit_vooi2c_getsda,
.getscl = bit_vooi2c_getscl,
.udelay = CYCLE_DELAY,
- .mdelay = CYCLE_DELAY,
.timeout = TIMEOUT
};
@@ -177,7 +176,6 @@
.getsda = bit_vooddc_getsda,
.getscl = bit_vooddc_getscl,
.udelay = CYCLE_DELAY,
- .mdelay = CYCLE_DELAY,
.timeout = TIMEOUT
};
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index eae9e81..32aab0d 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -383,7 +383,7 @@
}
/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm scx200_acb_algorithm = {
+static const struct i2c_algorithm scx200_acb_algorithm = {
.smbus_xfer = scx200_acb_smbus_xfer,
.functionality = scx200_acb_func,
};
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index cb3ef5a..8b65a5c 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -71,12 +71,12 @@
*/
static struct i2c_algo_bit_data scx200_i2c_data = {
- NULL,
- scx200_i2c_setsda,
- scx200_i2c_setscl,
- scx200_i2c_getsda,
- scx200_i2c_getscl,
- 10, 10, 100, /* waits, timeout */
+ .setsda = scx200_i2c_setsda,
+ .setscl = scx200_i2c_setscl,
+ .getsda = scx200_i2c_getsda,
+ .getscl = scx200_i2c_getscl,
+ .udelay = 10,
+ .timeout = 100,
};
static struct i2c_adapter scx200_i2c_ops = {
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index 13c1082..cec3a0c 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -209,10 +209,14 @@
}
/* create the sysfs eeprom file */
- sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr);
+ err = sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr);
+ if (err)
+ goto exit_detach;
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_kfree:
kfree(data);
exit:
@@ -223,6 +227,8 @@
{
int err;
+ sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
+
err = i2c_detach_client(client);
if (err)
return err;
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index f92505b..182f049 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -30,7 +30,7 @@
#include <linux/usb_ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb.h>
-#include <linux/usb_otg.h>
+#include <linux/usb/otg.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 88d2dde..76645c1 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -199,8 +199,7 @@
mutex_init(&data->update_lock);
/* Init fake client data */
- /* set the client data to the i2c_client so that it will get freed */
- i2c_set_clientdata(fake_client, fake_client);
+ i2c_set_clientdata(fake_client, NULL);
fake_client->addr = address | 1;
fake_client->adapter = adapter;
fake_client->driver = &max6875_driver;
@@ -214,13 +213,17 @@
goto exit_kfree2;
if ((err = i2c_attach_client(fake_client)) != 0)
- goto exit_detach;
+ goto exit_detach1;
- sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr);
+ err = sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr);
+ if (err)
+ goto exit_detach2;
return 0;
-exit_detach:
+exit_detach2:
+ i2c_detach_client(fake_client);
+exit_detach1:
i2c_detach_client(real_client);
exit_kfree2:
kfree(fake_client);
@@ -229,14 +232,24 @@
return err;
}
+/* Will be called for both the real client and the fake client */
static int max6875_detach_client(struct i2c_client *client)
{
int err;
+ struct max6875_data *data = i2c_get_clientdata(client);
+
+ /* data is NULL for the fake client */
+ if (data)
+ sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr);
err = i2c_detach_client(client);
if (err)
return err;
- kfree(i2c_get_clientdata(client));
+
+ if (data) /* real client */
+ kfree(data);
+ else /* fake client */
+ kfree(client);
return 0;
}
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index cb22280..f43c4e7 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -148,11 +148,16 @@
if ((err = i2c_attach_client(new_client)))
goto exit_kfree;
- /* Register sysfs hooks (don't care about failure) */
- sysfs_create_group(&new_client->dev.kobj, &pca9539_defattr_group);
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&new_client->dev.kobj,
+ &pca9539_defattr_group);
+ if (err)
+ goto exit_detach;
return 0;
+exit_detach:
+ i2c_detach_client(new_client);
exit_kfree:
kfree(data);
exit:
@@ -163,6 +168,8 @@
{
int err;
+ sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
+
if ((err = i2c_detach_client(client)))
return err;
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index c3e6449..32b2542 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -105,6 +105,16 @@
static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
+static struct attribute *pcf8574_attributes[] = {
+ &dev_attr_read.attr,
+ &dev_attr_write.attr,
+ NULL
+};
+
+static const struct attribute_group pcf8574_attr_group = {
+ .attrs = pcf8574_attributes,
+};
+
/*
* Real code
*/
@@ -166,13 +176,13 @@
pcf8574_init_client(new_client);
/* Register sysfs hooks */
- device_create_file(&new_client->dev, &dev_attr_read);
- device_create_file(&new_client->dev, &dev_attr_write);
+ err = sysfs_create_group(&new_client->dev.kobj, &pcf8574_attr_group);
+ if (err)
+ goto exit_detach;
return 0;
-/* OK, this is not exactly good programming practice, usually. But it is
- very code-efficient in this case. */
-
+ exit_detach:
+ i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -183,6 +193,8 @@
{
int err;
+ sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
+
if ((err = i2c_detach_client(client)))
return err;
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index 925a6b3..4dc3637 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -158,6 +158,28 @@
static DEVICE_ATTR(out0_enable, S_IWUSR | S_IRUGO,
show_out0_enable, set_out0_enable);
+static struct attribute *pcf8591_attributes[] = {
+ &dev_attr_out0_enable.attr,
+ &dev_attr_out0_output.attr,
+ &dev_attr_in0_input.attr,
+ &dev_attr_in1_input.attr,
+ NULL
+};
+
+static const struct attribute_group pcf8591_attr_group = {
+ .attrs = pcf8591_attributes,
+};
+
+static struct attribute *pcf8591_attributes_opt[] = {
+ &dev_attr_in2_input.attr,
+ &dev_attr_in3_input.attr,
+ NULL
+};
+
+static const struct attribute_group pcf8591_attr_group_opt = {
+ .attrs = pcf8591_attributes_opt,
+};
+
/*
* Real code
*/
@@ -211,24 +233,31 @@
pcf8591_init_client(new_client);
/* Register sysfs hooks */
- device_create_file(&new_client->dev, &dev_attr_out0_enable);
- device_create_file(&new_client->dev, &dev_attr_out0_output);
- device_create_file(&new_client->dev, &dev_attr_in0_input);
- device_create_file(&new_client->dev, &dev_attr_in1_input);
+ err = sysfs_create_group(&new_client->dev.kobj, &pcf8591_attr_group);
+ if (err)
+ goto exit_detach;
/* Register input2 if not in "two differential inputs" mode */
- if (input_mode != 3 )
- device_create_file(&new_client->dev, &dev_attr_in2_input);
-
- /* Register input3 only in "four single ended inputs" mode */
- if (input_mode == 0)
- device_create_file(&new_client->dev, &dev_attr_in3_input);
-
- return 0;
-
- /* OK, this is not exactly good programming practice, usually. But it is
- very code-efficient in this case. */
+ if (input_mode != 3) {
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_in2_input)))
+ goto exit_sysfs_remove;
+ }
+ /* Register input3 only in "four single ended inputs" mode */
+ if (input_mode == 0) {
+ if ((err = device_create_file(&new_client->dev,
+ &dev_attr_in3_input)))
+ goto exit_sysfs_remove;
+ }
+
+ return 0;
+
+exit_sysfs_remove:
+ sysfs_remove_group(&new_client->dev.kobj, &pcf8591_attr_group_opt);
+ sysfs_remove_group(&new_client->dev.kobj, &pcf8591_attr_group);
+exit_detach:
+ i2c_detach_client(new_client);
exit_kfree:
kfree(data);
exit:
@@ -239,6 +268,9 @@
{
int err;
+ sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt);
+ sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group);
+
if ((err = i2c_detach_client(client)))
return err;
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 0be6fd6..6a75782 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -305,7 +305,7 @@
static int dbg_tps_open(struct inode *inode, struct file *file)
{
- return single_open(file, dbg_show, inode->u.generic_ip);
+ return single_open(file, dbg_show, inode->i_private);
}
static struct file_operations debug_fops = {
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 9cb277d..01233f0 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -183,15 +183,21 @@
sprintf(adap->dev.bus_id, "i2c-%d", adap->nr);
adap->dev.driver = &i2c_adapter_driver;
adap->dev.release = &i2c_adapter_dev_release;
- device_register(&adap->dev);
- device_create_file(&adap->dev, &dev_attr_name);
+ res = device_register(&adap->dev);
+ if (res)
+ goto out_list;
+ res = device_create_file(&adap->dev, &dev_attr_name);
+ if (res)
+ goto out_unregister;
/* Add this adapter to the i2c_adapter class */
memset(&adap->class_dev, 0x00, sizeof(struct class_device));
adap->class_dev.dev = &adap->dev;
adap->class_dev.class = &i2c_adapter_class;
strlcpy(adap->class_dev.class_id, adap->dev.bus_id, BUS_ID_SIZE);
- class_device_register(&adap->class_dev);
+ res = class_device_register(&adap->class_dev);
+ if (res)
+ goto out_remove_name;
dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
@@ -206,6 +212,17 @@
out_unlock:
mutex_unlock(&core_lists);
return res;
+
+out_remove_name:
+ device_remove_file(&adap->dev, &dev_attr_name);
+out_unregister:
+ init_completion(&adap->dev_released); /* Needed? */
+ device_unregister(&adap->dev);
+ wait_for_completion(&adap->dev_released);
+out_list:
+ list_del(&adap->list);
+ idr_remove(&i2c_adapter_idr, adap->nr);
+ goto out_unlock;
}
@@ -394,14 +411,14 @@
int i2c_attach_client(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
+ int res = 0;
mutex_lock(&adapter->clist_lock);
if (__i2c_check_addr(client->adapter, client->addr)) {
- mutex_unlock(&adapter->clist_lock);
- return -EBUSY;
+ res = -EBUSY;
+ goto out_unlock;
}
list_add_tail(&client->list,&adapter->clients);
- mutex_unlock(&adapter->clist_lock);
if (adapter->client_register) {
if (adapter->client_register(client)) {
@@ -422,10 +439,26 @@
"%d-%04x", i2c_adapter_id(adapter), client->addr);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
client->name, client->dev.bus_id);
- device_register(&client->dev);
- device_create_file(&client->dev, &dev_attr_client_name);
-
- return 0;
+ res = device_register(&client->dev);
+ if (res)
+ goto out_list;
+ res = device_create_file(&client->dev, &dev_attr_client_name);
+ if (res)
+ goto out_unregister;
+
+out_unlock:
+ mutex_unlock(&adapter->clist_lock);
+ return res;
+
+out_unregister:
+ init_completion(&client->released); /* Needed? */
+ device_unregister(&client->dev);
+ wait_for_completion(&client->released);
+out_list:
+ list_del(&client->list);
+ dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x "
+ "(%d)\n", client->name, client->addr, res);
+ goto out_unlock;
}
@@ -674,11 +707,16 @@
/* Finally call the custom detection function */
err = found_proc(adapter, addr, kind);
-
/* -ENODEV can be returned if there is a chip at the given address
but it isn't supported by this chip driver. We catch it here as
this isn't an error. */
- return (err == -ENODEV) ? 0 : err;
+ if (err == -ENODEV)
+ err = 0;
+
+ if (err)
+ dev_warn(&adapter->dev, "Client creation failed at 0x%x (%d)\n",
+ addr, err);
+ return err;
}
int i2c_probe(struct i2c_adapter *adapter,
@@ -868,7 +906,7 @@
I2C_SMBUS_READ,0,I2C_SMBUS_BYTE, &data))
return -1;
else
- return 0x0FF & data.byte;
+ return data.byte;
}
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
@@ -884,7 +922,7 @@
I2C_SMBUS_READ,command, I2C_SMBUS_BYTE_DATA,&data))
return -1;
else
- return 0x0FF & data.byte;
+ return data.byte;
}
s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
@@ -903,7 +941,7 @@
I2C_SMBUS_READ,command, I2C_SMBUS_WORD_DATA, &data))
return -1;
else
- return 0x0FFFF & data.word;
+ return data.word;
}
s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
@@ -1006,7 +1044,7 @@
else {
msg[0].len=3;
msgbuf0[1] = data->word & 0xff;
- msgbuf0[2] = (data->word >> 8) & 0xff;
+ msgbuf0[2] = data->word >> 8;
}
break;
case I2C_SMBUS_PROC_CALL:
@@ -1015,7 +1053,7 @@
msg[0].len = 3;
msg[1].len = 2;
msgbuf0[1] = data->word & 0xff;
- msgbuf0[2] = (data->word >> 8) & 0xff;
+ msgbuf0[2] = data->word >> 8;
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 58ccddd..3f86903 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -32,43 +32,35 @@
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/init.h>
+#include <linux/list.h>
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
-#include <linux/platform_device.h>
#include <asm/uaccess.h>
-static struct i2c_client i2cdev_client_template;
+static struct i2c_driver i2cdev_driver;
struct i2c_dev {
- int minor;
+ struct list_head list;
struct i2c_adapter *adap;
struct class_device *class_dev;
};
-#define to_i2c_dev(d) container_of(d, struct i2c_dev, class_dev)
#define I2C_MINORS 256
-static struct i2c_dev *i2c_dev_array[I2C_MINORS];
-static DEFINE_SPINLOCK(i2c_dev_array_lock);
+static LIST_HEAD(i2c_dev_list);
+static DEFINE_SPINLOCK(i2c_dev_list_lock);
static struct i2c_dev *i2c_dev_get_by_minor(unsigned index)
{
struct i2c_dev *i2c_dev;
- spin_lock(&i2c_dev_array_lock);
- i2c_dev = i2c_dev_array[index];
- spin_unlock(&i2c_dev_array_lock);
- return i2c_dev;
-}
-
-static struct i2c_dev *i2c_dev_get_by_adapter(struct i2c_adapter *adap)
-{
- struct i2c_dev *i2c_dev = NULL;
-
- spin_lock(&i2c_dev_array_lock);
- if ((i2c_dev_array[adap->nr]) &&
- (i2c_dev_array[adap->nr]->adap == adap))
- i2c_dev = i2c_dev_array[adap->nr];
- spin_unlock(&i2c_dev_array_lock);
+ spin_lock(&i2c_dev_list_lock);
+ list_for_each_entry(i2c_dev, &i2c_dev_list, list) {
+ if (i2c_dev->adap->nr == index)
+ goto found;
+ }
+ i2c_dev = NULL;
+found:
+ spin_unlock(&i2c_dev_list_lock);
return i2c_dev;
}
@@ -76,30 +68,28 @@
{
struct i2c_dev *i2c_dev;
+ if (adap->nr >= I2C_MINORS) {
+ printk(KERN_ERR "i2c-dev: Out of device minors (%d)\n",
+ adap->nr);
+ return ERR_PTR(-ENODEV);
+ }
+
i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL);
if (!i2c_dev)
return ERR_PTR(-ENOMEM);
+ i2c_dev->adap = adap;
- spin_lock(&i2c_dev_array_lock);
- if (i2c_dev_array[adap->nr]) {
- spin_unlock(&i2c_dev_array_lock);
- dev_err(&adap->dev, "i2c-dev already has a device assigned to this adapter\n");
- goto error;
- }
- i2c_dev->minor = adap->nr;
- i2c_dev_array[adap->nr] = i2c_dev;
- spin_unlock(&i2c_dev_array_lock);
+ spin_lock(&i2c_dev_list_lock);
+ list_add_tail(&i2c_dev->list, &i2c_dev_list);
+ spin_unlock(&i2c_dev_list_lock);
return i2c_dev;
-error:
- kfree(i2c_dev);
- return ERR_PTR(-ENODEV);
}
static void return_i2c_dev(struct i2c_dev *i2c_dev)
{
- spin_lock(&i2c_dev_array_lock);
- i2c_dev_array[i2c_dev->minor] = NULL;
- spin_unlock(&i2c_dev_array_lock);
+ spin_lock(&i2c_dev_list_lock);
+ list_del(&i2c_dev->list);
+ spin_unlock(&i2c_dev_list_lock);
}
static ssize_t show_adapter_name(struct class_device *class_dev, char *buf)
@@ -375,12 +365,13 @@
if (!adap)
return -ENODEV;
- client = kmalloc(sizeof(*client), GFP_KERNEL);
+ client = kzalloc(sizeof(*client), GFP_KERNEL);
if (!client) {
i2c_put_adapter(adap);
return -ENOMEM;
}
- memcpy(client, &i2cdev_client_template, sizeof(*client));
+ snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr);
+ client->driver = &i2cdev_driver;
/* registered with adapter, passed as client to user */
client->adapter = adap;
@@ -415,41 +406,47 @@
static int i2cdev_attach_adapter(struct i2c_adapter *adap)
{
struct i2c_dev *i2c_dev;
- struct device *dev;
+ int res;
i2c_dev = get_free_i2c_dev(adap);
if (IS_ERR(i2c_dev))
return PTR_ERR(i2c_dev);
- pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
- adap->name, i2c_dev->minor);
-
/* register this i2c device with the driver core */
- i2c_dev->adap = adap;
- dev = &adap->dev;
i2c_dev->class_dev = class_device_create(i2c_dev_class, NULL,
- MKDEV(I2C_MAJOR, i2c_dev->minor),
- dev, "i2c-%d", i2c_dev->minor);
- if (!i2c_dev->class_dev)
+ MKDEV(I2C_MAJOR, adap->nr),
+ &adap->dev, "i2c-%d",
+ adap->nr);
+ if (!i2c_dev->class_dev) {
+ res = -ENODEV;
goto error;
- class_device_create_file(i2c_dev->class_dev, &class_device_attr_name);
+ }
+ res = class_device_create_file(i2c_dev->class_dev, &class_device_attr_name);
+ if (res)
+ goto error_destroy;
+
+ pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
+ adap->name, adap->nr);
return 0;
+error_destroy:
+ class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
error:
return_i2c_dev(i2c_dev);
kfree(i2c_dev);
- return -ENODEV;
+ return res;
}
static int i2cdev_detach_adapter(struct i2c_adapter *adap)
{
struct i2c_dev *i2c_dev;
- i2c_dev = i2c_dev_get_by_adapter(adap);
- if (!i2c_dev)
- return -ENODEV;
+ i2c_dev = i2c_dev_get_by_minor(adap->nr);
+ if (!i2c_dev) /* attach_adapter must have failed */
+ return 0;
+ class_device_remove_file(i2c_dev->class_dev, &class_device_attr_name);
return_i2c_dev(i2c_dev);
- class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, i2c_dev->minor));
+ class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
kfree(i2c_dev);
pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
@@ -471,12 +468,6 @@
.detach_client = i2cdev_detach_client,
};
-static struct i2c_client i2cdev_client_template = {
- .name = "I2C /dev entry",
- .addr = -1,
- .driver = &i2cdev_driver,
-};
-
static int __init i2c_dev_init(void)
{
int res;
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index defd4b4..9c8468d 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1207,7 +1207,7 @@
EXPORT_SYMBOL(system_bus_clock);
-static int generic_ide_suspend(struct device *dev, pm_message_t state)
+static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
ide_drive_t *drive = dev->driver_data;
struct request rq;
@@ -1221,7 +1221,9 @@
rq.special = &args;
rq.end_io_data = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
- rqpm.pm_state = state.event;
+ if (mesg.event == PM_EVENT_PRETHAW)
+ mesg.event = PM_EVENT_FREEZE;
+ rqpm.pm_state = mesg.event;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 996c694..31ad79f 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1369,15 +1369,16 @@
}
static int
-pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t state)
+pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
{
ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
int rc = 0;
- if (state.event != mdev->ofdev.dev.power.power_state.event && state.event >= PM_EVENT_SUSPEND) {
+ if (mesg.event != mdev->ofdev.dev.power.power_state.event
+ && mesg.event == PM_EVENT_SUSPEND) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
- mdev->ofdev.dev.power.power_state = state;
+ mdev->ofdev.dev.power.power_state = mesg;
}
return rc;
@@ -1473,15 +1474,16 @@
}
static int
-pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev);
int rc = 0;
- if (state.event != pdev->dev.power.power_state.event && state.event >= 2) {
+ if (mesg.event != pdev->dev.power.power_state.event
+ && mesg.event == PM_EVENT_SUSPEND) {
rc = pmac_ide_do_suspend(hwif);
if (rc == 0)
- pdev->dev.power.power_state = state;
+ pdev->dev.power.power_state = mesg;
}
return rc;
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index e6f4123..b4f146f2 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -137,7 +137,6 @@
.getsda = bit_getsda,
.getscl = bit_getscl,
.udelay = 5,
- .mdelay = 5,
.timeout = 100,
};
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 082f03c..493f4c6 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -2987,10 +2987,7 @@
static void __exit ib_mad_cleanup_module(void)
{
ib_unregister_client(&mad_client);
-
- if (kmem_cache_destroy(ib_mad_cache)) {
- printk(KERN_DEBUG PFX "Failed to destroy ib_mad cache\n");
- }
+ kmem_cache_destroy(ib_mad_cache);
}
module_init(ib_mad_init_module);
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index a5eb30a..c8a8af0 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -61,10 +61,9 @@
inode->i_mode = mode;
inode->i_uid = 0;
inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->u.generic_ip = data;
+ inode->i_private = data;
if ((mode & S_IFMT) == S_IFDIR) {
inode->i_op = &simple_dir_inode_operations;
inode->i_nlink++;
@@ -119,7 +118,7 @@
u16 i;
struct ipath_devdata *dd;
- dd = file->f_dentry->d_inode->u.generic_ip;
+ dd = file->f_dentry->d_inode->i_private;
for (i = 0; i < NUM_COUNTERS; i++)
counters[i] = ipath_snap_cntr(dd, i);
@@ -139,7 +138,7 @@
struct ipath_devdata *dd;
u64 guid;
- dd = file->f_dentry->d_inode->u.generic_ip;
+ dd = file->f_dentry->d_inode->i_private;
guid = be64_to_cpu(dd->ipath_guid);
@@ -178,7 +177,7 @@
u32 tmp, tmp2;
struct ipath_devdata *dd;
- dd = file->f_dentry->d_inode->u.generic_ip;
+ dd = file->f_dentry->d_inode->i_private;
/* so we only initialize non-zero fields. */
memset(portinfo, 0, sizeof portinfo);
@@ -325,7 +324,7 @@
goto bail;
}
- dd = file->f_dentry->d_inode->u.generic_ip;
+ dd = file->f_dentry->d_inode->i_private;
if (ipath_eeprom_read(dd, pos, tmp, count)) {
ipath_dev_err(dd, "failed to read from flash\n");
ret = -ENXIO;
@@ -381,7 +380,7 @@
goto bail_tmp;
}
- dd = file->f_dentry->d_inode->u.generic_ip;
+ dd = file->f_dentry->d_inode->i_private;
if (ipath_eeprom_write(dd, pos, tmp, count)) {
ret = -ENXIO;
ipath_dev_err(dd, "failed to write to flash\n");
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index bf2455a..5c9b509 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -742,7 +742,6 @@
return 0;
}
-#define HT_CAPABILITY_ID 0x08 /* HT capabilities not defined in kernel */
#define HT_INTR_DISC_CONFIG 0x80 /* HT interrupt and discovery cap */
#define HT_INTR_REG_INDEX 2 /* intconfig requires indirect accesses */
@@ -973,7 +972,7 @@
* do this early, before we ever enable errors or hardware errors,
* mostly to avoid causing the chip to enter freeze mode.
*/
- pos = pci_find_capability(pdev, HT_CAPABILITY_ID);
+ pos = pci_find_capability(pdev, PCI_CAP_ID_HT);
if (!pos) {
ipath_dev_err(dd, "Couldn't find HyperTransport "
"capability; no interrupts\n");
@@ -996,7 +995,7 @@
else if (cap_type == HT_INTR_DISC_CONFIG)
ihandler = set_int_handler(dd, pdev, pos);
} while ((pos = pci_find_next_capability(pdev, pos,
- HT_CAPABILITY_ID)));
+ PCI_CAP_ID_HT)));
if (!ihandler) {
ipath_dev_err(dd, "Couldn't find interrupt handler in "
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_fs.c b/drivers/infiniband/ulp/ipoib/ipoib_fs.c
index 5dde380..f1cb836 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_fs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_fs.c
@@ -141,7 +141,7 @@
return ret;
seq = file->private_data;
- seq->private = inode->u.generic_ip;
+ seq->private = inode->i_private;
return 0;
}
@@ -247,7 +247,7 @@
return ret;
seq = file->private_data;
- seq->private = inode->u.generic_ip;
+ seq->private = inode->i_private;
return 0;
}
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index fa97e0f..ee6c2f4 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -15,7 +15,6 @@
#define HP680_TS_ABS_Y_MIN 80
#define HP680_TS_ABS_Y_MAX 910
-#define SCPCR 0xa4000116
#define PHDR 0xa400012e
#define SCPDR 0xa4000136
@@ -77,19 +76,6 @@
static int __init hp680_ts_init(void)
{
- u8 scpdr;
- u16 scpcr;
-
- scpdr = ctrl_inb(SCPDR);
- scpdr |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
- scpdr &= ~SCPDR_TS_SCAN_ENABLE;
- ctrl_outb(scpdr, SCPDR);
-
- scpcr = ctrl_inw(SCPCR);
- scpcr &= ~SCPCR_TS_MASK;
- scpcr |= SCPCR_TS_ENABLE;
- ctrl_outw(scpcr, SCPCR);
-
hp680_ts_dev = input_allocate_device();
if (!hp680_ts_dev)
return -ENOMEM;
diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index 9ea6bd0..2dd1b57 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -104,7 +104,6 @@
inode->i_ino = 1;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
inode->i_blocks = 0;
- inode->i_blksize = 1024;
inode->i_uid = inode->i_gid = 0;
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
inode->i_op = &simple_dir_inode_operations;
@@ -149,7 +148,6 @@
if (!inode)
return;
inode->i_ino = number+2;
- inode->i_blksize = 1024;
inode->i_uid = config.setuid ? config.uid : current->fsuid;
inode->i_gid = config.setgid ? config.gid : current->fsgid;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 3845def..5cfbe6a 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -192,7 +192,7 @@
return "bit stuffing error, timeout, or unknown USB error";
case -EILSEQ:
return "CRC mismatch, timeout, or unknown USB error";
- case -ETIMEDOUT:
+ case -ETIME:
return "timed out";
case -EPIPE:
return "endpoint stalled";
diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h
index ec52c1a..6349367 100644
--- a/drivers/isdn/hisax/hfc_usb.h
+++ b/drivers/isdn/hisax/hfc_usb.h
@@ -137,11 +137,11 @@
{-ENXIO, "URB already queued"},
{-EFBIG, "Too much ISO frames requested"},
{-ENOSR, "Buffer error (overrun)"},
- {-EPIPE, "Specified endpoint is stalled (device not responding)"},
+ {-EPIPE, "Specified endpoint is stalled"},
{-EOVERFLOW, "Babble (bad cable?)"},
{-EPROTO, "Bit-stuff error (bad cable?)"},
- {-EILSEQ, "CRC/Timeout"},
- {-ETIMEDOUT, "NAK (device does not respond)"},
+ {-EILSEQ, "CRC or missing token"},
+ {-ETIME, "Device did not respond"},
{-ESHUTDOWN, "Device unplugged"},
{-1, NULL}
};
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 001c71b..410fa6d 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -981,7 +981,7 @@
if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return -ERESTARTSYS;
- if (state.event > PM_EVENT_ON) {
+ if (1) {
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
cinergyt2_suspend_rc(cinergyt2);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
index 9002f35..88b2837 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c
@@ -80,7 +80,6 @@
switch (urb->status) {
case 0: /* success */
- case -ETIMEDOUT: /* NAK */
break;
case -ECONNRESET: /* kill */
case -ENOENT:
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 6c1cb77..c9d66354 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -215,7 +215,7 @@
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- case -ETIMEDOUT:
+ case -ETIME:
/* this urb is dead, cleanup */
dprintk("%s:urb shutting down with status: %d\n",
__FUNCTION__, urb->status);
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 4b562b3..0dfbcc8 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -100,7 +100,6 @@
.getsda = bttv_bit_getsda,
.getscl = bttv_bit_getscl,
.udelay = 16,
- .mdelay = 10,
.timeout = 200,
};
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index 7066380..7bea347 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -155,7 +155,6 @@
.getsda = cx8800_bit_getsda,
.getscl = cx8800_bit_getscl,
.udelay = 16,
- .mdelay = 10,
.timeout = 200,
};
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index 751a754..2b4f197 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -100,7 +100,6 @@
.getsda = vp3054_bit_getsda,
.getscl = vp3054_bit_getscl,
.udelay = 16,
- .mdelay = 10,
.timeout = 200,
};
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 1b07a61..5d8cd28 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -301,10 +301,11 @@
static struct symbolic_list urb_errlist[] = {
{ -ENOSR, "Buffer error (overrun)" },
{ -EPIPE, "Stalled (device not responding)" },
- { -EOVERFLOW, "Babble (bad cable?)" },
+ { -EOVERFLOW, "Babble (device sends too much data)" },
{ -EPROTO, "Bit-stuff error (bad cable?)" },
- { -EILSEQ, "CRC/Timeout" },
- { -ETIMEDOUT, "NAK (device does not respond)" },
+ { -EILSEQ, "CRC/Timeout (bad cable?)" },
+ { -ETIME, "Device does not respond to token" },
+ { -ETIMEDOUT, "Device does not respond to command" },
{ -1, NULL }
};
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index d470394..53c4b57 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -711,7 +711,7 @@
case -EOVERFLOW: errmsg = "Babble (bad cable?)"; break;
case -EPROTO: errmsg = "Bit-stuff error (bad cable?)"; break;
case -EILSEQ: errmsg = "CRC/Timeout (could be anything)"; break;
- case -ETIMEDOUT: errmsg = "NAK (device does not respond)"; break;
+ case -ETIME: errmsg = "Device does not respond"; break;
}
PWC_DEBUG_FLOW("pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg);
/* Give up after a number of contiguous errors on the USB bus.
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 20f211b..2912326 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -586,15 +586,14 @@
{ -EFBIG, "Too much ISO frames requested" },
{ -ENOSR, "Buffer error (overrun)" },
{ -EPIPE, "Specified endpoint is stalled (device not responding)"},
- { -EOVERFLOW, "Babble (bad cable?)" },
+ { -EOVERFLOW, "Babble (too much data)" },
{ -EPROTO, "Bit-stuff error (bad cable?)" },
{ -EILSEQ, "CRC/Timeout" },
- { -ETIMEDOUT, "NAK (device does not respond)" },
+ { -ETIME, "Device does not respond to token" },
+ { -ETIMEDOUT, "Device does not respond to command" },
{ -1, NULL }
};
-
-
/****************************************************************************
* Memory management functions *
****************************************************************************/
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index f2249ed..29f59c3 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -820,7 +820,6 @@
.getsda = zoran_i2c_getsda,
.getscl = zoran_i2c_getscl,
.udelay = 10,
- .mdelay = 0,
.timeout = 100,
};
diff --git a/drivers/misc/ibmasm/ibmasmfs.c b/drivers/misc/ibmasm/ibmasmfs.c
index 4a35caf..b99dc50 100644
--- a/drivers/misc/ibmasm/ibmasmfs.c
+++ b/drivers/misc/ibmasm/ibmasmfs.c
@@ -147,7 +147,6 @@
if (ret) {
ret->i_mode = mode;
ret->i_uid = ret->i_gid = 0;
- ret->i_blksize = PAGE_CACHE_SIZE;
ret->i_blocks = 0;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
}
@@ -175,7 +174,7 @@
}
inode->i_fop = fops;
- inode->u.generic_ip = data;
+ inode->i_private = data;
d_add(dentry, inode);
return dentry;
@@ -244,7 +243,7 @@
{
struct ibmasmfs_command_data *command_data;
- if (!inode->u.generic_ip)
+ if (!inode->i_private)
return -ENODEV;
command_data = kmalloc(sizeof(struct ibmasmfs_command_data), GFP_KERNEL);
@@ -252,7 +251,7 @@
return -ENOMEM;
command_data->command = NULL;
- command_data->sp = inode->u.generic_ip;
+ command_data->sp = inode->i_private;
file->private_data = command_data;
return 0;
}
@@ -351,10 +350,10 @@
struct ibmasmfs_event_data *event_data;
struct service_processor *sp;
- if (!inode->u.generic_ip)
+ if (!inode->i_private)
return -ENODEV;
- sp = inode->u.generic_ip;
+ sp = inode->i_private;
event_data = kmalloc(sizeof(struct ibmasmfs_event_data), GFP_KERNEL);
if (!event_data)
@@ -439,14 +438,14 @@
{
struct ibmasmfs_heartbeat_data *rhbeat;
- if (!inode->u.generic_ip)
+ if (!inode->i_private)
return -ENODEV;
rhbeat = kmalloc(sizeof(struct ibmasmfs_heartbeat_data), GFP_KERNEL);
if (!rhbeat)
return -ENOMEM;
- rhbeat->sp = (struct service_processor *)inode->u.generic_ip;
+ rhbeat->sp = inode->i_private;
rhbeat->active = 0;
ibmasm_init_reverse_heartbeat(rhbeat->sp, &rhbeat->heartbeat);
file->private_data = rhbeat;
@@ -508,7 +507,7 @@
static int remote_settings_file_open(struct inode *inode, struct file *file)
{
- file->private_data = inode->u.generic_ip;
+ file->private_data = inode->i_private;
return 0;
}
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 59c3392..b936373 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -225,6 +225,7 @@
{ "TCM5095" },
{ "" }
};
+MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
static int el3_eisa_probe (struct device *device);
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index af301f0..df42e28 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -851,6 +851,7 @@
{ "TCM5970", CH_3C597 },
{ "" }
};
+MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids);
static int vortex_eisa_probe(struct device *device);
static int vortex_eisa_remove(struct device *device);
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 2a0d538..383cef1 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -671,10 +671,8 @@
* Jean II */
done = 1;
break;
- case -ECONNABORTED: /* -103 */
- case -ECONNRESET: /* -104 */
- case -ETIMEDOUT: /* -110 */
- case -ENOENT: /* -2 (urb unlinked by us) */
+ case -ECONNRESET:
+ case -ENOENT: /* urb unlinked by us */
default: /* ??? - Play safe */
urb->status = 0;
netif_wake_queue(self->netdev);
@@ -712,10 +710,8 @@
* Jean II */
done = 1;
break;
- case -ECONNABORTED: /* -103 */
- case -ECONNRESET: /* -104 */
- case -ETIMEDOUT: /* -110 */
- case -ENOENT: /* -2 (urb unlinked by us) */
+ case -ECONNRESET:
+ case -ENOENT: /* urb unlinked by us */
default: /* ??? - Play safe */
if(skb != NULL) {
dev_kfree_skb_any(skb);
@@ -845,14 +841,14 @@
self->stats.rx_crc_errors++;
/* Also precursor to a hot-unplug on UHCI. */
/* Fallthrough... */
- case -ECONNRESET: /* -104 */
+ case -ECONNRESET:
/* Random error, if I remember correctly */
/* uhci_cleanup_unlink() is going to kill the Rx
* URB just after we return. No problem, at this
* point the URB will be idle ;-) - Jean II */
- case -ESHUTDOWN: /* -108 */
+ case -ESHUTDOWN:
/* That's usually a hot-unplug. Submit will fail... */
- case -ETIMEDOUT: /* -110 */
+ case -ETIME:
/* Usually precursor to a hot-unplug on OHCI. */
default:
self->stats.rx_errors++;
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index a82a4ba..c37f0bc 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -58,7 +58,7 @@
/* PDE() introduced in 2.5.4 */
#ifdef CONFIG_PROC_FS
-#define PDE(inode) ((inode)->u.generic_ip)
+#define PDE(inode) ((inode)->i_private)
#endif
/* irda crc16 calculation exported in 2.5.42 */
diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
index 0fa8e4d..d663289 100644
--- a/drivers/net/ne3210.c
+++ b/drivers/net/ne3210.c
@@ -343,6 +343,7 @@
{ "NVL1801" },
{ "" },
};
+MODULE_DEVICE_TABLE(eisa, ne3210_ids);
static struct eisa_driver ne3210_eisa_driver = {
.id_table = ne3210_ids,
diff --git a/drivers/net/stnic.c b/drivers/net/stnic.c
index 3fd7a4f..e6f9042 100644
--- a/drivers/net/stnic.c
+++ b/drivers/net/stnic.c
@@ -19,7 +19,7 @@
#include <asm/system.h>
#include <asm/io.h>
-#include <asm/se/se.h>
+#include <asm/se.h>
#include <asm/machvec.h>
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index e661d0a9..fb5fa7d 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -2114,6 +2114,7 @@
{ "DEC4250", 0 }, /* 0 is the board name index... */
{ "" }
};
+MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
static struct eisa_driver de4x5_eisa_driver = {
.id_table = de4x5_eisa_ids,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
index 923275e..b9df06a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
@@ -54,7 +54,7 @@
static int open_file_generic(struct inode *inode, struct file *file)
{
- file->private_data = inode->u.generic_ip;
+ file->private_data = inode->i_private;
return 0;
}
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index a44dda9..80af9a9 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -119,7 +119,7 @@
switch(urb->status) {
case -EILSEQ:
case -ENODEV:
- case -ETIMEDOUT:
+ case -ETIME:
case -ENOENT:
case -EPIPE:
case -EOVERFLOW:
@@ -201,7 +201,7 @@
switch(urb->status) {
case -EILSEQ:
case -ENODEV:
- case -ETIMEDOUT:
+ case -ETIME:
case -ENOENT:
case -EPIPE:
case -EOVERFLOW:
diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c
index 71c2da2..5756401 100644
--- a/drivers/oprofile/oprofilefs.c
+++ b/drivers/oprofile/oprofilefs.c
@@ -31,7 +31,6 @@
inode->i_mode = mode;
inode->i_uid = 0;
inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
}
@@ -110,8 +109,8 @@
static int default_open(struct inode * inode, struct file * filp)
{
- if (inode->u.generic_ip)
- filp->private_data = inode->u.generic_ip;
+ if (inode->i_private)
+ filp->private_data = inode->i_private;
return 0;
}
@@ -158,7 +157,7 @@
if (!d)
return -EFAULT;
- d->d_inode->u.generic_ip = val;
+ d->d_inode->i_private = val;
return 0;
}
@@ -171,7 +170,7 @@
if (!d)
return -EFAULT;
- d->d_inode->u.generic_ip = val;
+ d->d_inode->i_private = val;
return 0;
}
@@ -197,7 +196,7 @@
if (!d)
return -EFAULT;
- d->d_inode->u.generic_ip = val;
+ d->d_inode->i_private = val;
return 0;
}
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 4d762fc..c27e782 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -17,6 +17,31 @@
If you don't know what to do here, say N.
+config PCI_MULTITHREAD_PROBE
+ bool "PCI Multi-threaded probe (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ help
+ Say Y here if you want the PCI core to spawn a new thread for
+ every PCI device that is probed. This can cause a huge
+ speedup in boot times on multiprocessor machines, and even a
+ smaller speedup on single processor machines.
+
+ But it can also cause lots of bad things to happen. A number
+ of PCI drivers can not properly handle running in this way,
+ some will just not work properly at all, while others might
+ decide to blow up power supplies with a huge load all at once,
+ so use this option at your own risk.
+
+ It is very unwise to use this option if you are not using a
+ boot process that can handle devices being created in any
+ order. A program that can create persistant block and network
+ device names (like udev) is a good idea if you wish to use
+ this option.
+
+ Again, use this option at your own risk, you have been warned!
+
+ When in doubt, say N.
+
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 5f7db9d..aadaa3c 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -77,9 +77,12 @@
* This adds a single pci device to the global
* device list and adds sysfs and procfs entries
*/
-void __devinit pci_bus_add_device(struct pci_dev *dev)
+int __devinit pci_bus_add_device(struct pci_dev *dev)
{
- device_add(&dev->dev);
+ int retval;
+ retval = device_add(&dev->dev);
+ if (retval)
+ return retval;
down_write(&pci_bus_sem);
list_add_tail(&dev->global_list, &pci_devices);
@@ -87,6 +90,7 @@
pci_proc_attach_device(dev);
pci_create_sysfs_dev_files(dev);
+ return 0;
}
/**
@@ -104,6 +108,7 @@
void __devinit pci_bus_add_devices(struct pci_bus *bus)
{
struct pci_dev *dev;
+ int retval;
list_for_each_entry(dev, &bus->devices, bus_list) {
/*
@@ -112,7 +117,9 @@
*/
if (!list_empty(&dev->global_list))
continue;
- pci_bus_add_device(dev);
+ retval = pci_bus_add_device(dev);
+ if (retval)
+ dev_err(&dev->dev, "Error adding device, continuing\n");
}
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -129,10 +136,13 @@
list_add_tail(&dev->subordinate->node,
&dev->bus->children);
up_write(&pci_bus_sem);
- }
+ }
pci_bus_add_devices(dev->subordinate);
-
- sysfs_create_link(&dev->subordinate->class_dev.kobj, &dev->dev.kobj, "bridge");
+ retval = sysfs_create_link(&dev->subordinate->class_dev.kobj,
+ &dev->dev.kobj, "bridge");
+ if (retval)
+ dev_err(&dev->dev, "Error creating sysfs "
+ "bridge symlink, continuing...\n");
}
}
}
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index be104ec..7fff07e 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -150,6 +150,11 @@
struct module *owner;
};
+struct acpiphp_ioapic {
+ struct pci_dev *dev;
+ u32 gsi_base;
+ struct list_head list;
+};
/* PCI bus bridge HID */
#define ACPI_PCI_HOST_HID "PNP0A03"
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index ae67a8f..83e8e44 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -53,6 +53,8 @@
#include "acpiphp.h"
static LIST_HEAD(bridge_list);
+static LIST_HEAD(ioapic_list);
+static DEFINE_SPINLOCK(ioapic_list_lock);
#define MY_NAME "acpiphp_glue"
@@ -797,6 +799,7 @@
struct pci_dev *pdev;
u32 gsi_base;
u64 phys_addr;
+ struct acpiphp_ioapic *ioapic;
/* Evaluate _STA if present */
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
@@ -811,41 +814,107 @@
if (get_gsi_base(handle, &gsi_base))
return AE_OK;
+ ioapic = kmalloc(sizeof(*ioapic), GFP_KERNEL);
+ if (!ioapic)
+ return AE_NO_MEMORY;
+
pdev = get_apic_pci_info(handle);
if (!pdev)
- return AE_OK;
+ goto exit_kfree;
- if (pci_enable_device(pdev)) {
- pci_dev_put(pdev);
- return AE_OK;
- }
+ if (pci_enable_device(pdev))
+ goto exit_pci_dev_put;
pci_set_master(pdev);
- if (pci_request_region(pdev, 0, "I/O APIC(acpiphp)")) {
- pci_disable_device(pdev);
- pci_dev_put(pdev);
- return AE_OK;
- }
+ if (pci_request_region(pdev, 0, "I/O APIC(acpiphp)"))
+ goto exit_pci_disable_device;
phys_addr = pci_resource_start(pdev, 0);
- if (acpi_register_ioapic(handle, phys_addr, gsi_base)) {
- pci_release_region(pdev, 0);
- pci_disable_device(pdev);
- pci_dev_put(pdev);
+ if (acpi_register_ioapic(handle, phys_addr, gsi_base))
+ goto exit_pci_release_region;
+
+ ioapic->gsi_base = gsi_base;
+ ioapic->dev = pdev;
+ spin_lock(&ioapic_list_lock);
+ list_add_tail(&ioapic->list, &ioapic_list);
+ spin_unlock(&ioapic_list_lock);
+
+ return AE_OK;
+
+ exit_pci_release_region:
+ pci_release_region(pdev, 0);
+ exit_pci_disable_device:
+ pci_disable_device(pdev);
+ exit_pci_dev_put:
+ pci_dev_put(pdev);
+ exit_kfree:
+ kfree(ioapic);
+
+ return AE_OK;
+}
+
+static acpi_status
+ioapic_remove(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ acpi_status status;
+ unsigned long sta;
+ acpi_handle tmp;
+ u32 gsi_base;
+ struct acpiphp_ioapic *pos, *n, *ioapic = NULL;
+
+ /* Evaluate _STA if present */
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+ if (ACPI_SUCCESS(status) && sta != ACPI_STA_ALL)
+ return AE_CTRL_DEPTH;
+
+ /* Scan only PCI bus scope */
+ status = acpi_get_handle(handle, "_HID", &tmp);
+ if (ACPI_SUCCESS(status))
+ return AE_CTRL_DEPTH;
+
+ if (get_gsi_base(handle, &gsi_base))
return AE_OK;
+
+ acpi_unregister_ioapic(handle, gsi_base);
+
+ spin_lock(&ioapic_list_lock);
+ list_for_each_entry_safe(pos, n, &ioapic_list, list) {
+ if (pos->gsi_base != gsi_base)
+ continue;
+ ioapic = pos;
+ list_del(&ioapic->list);
+ break;
}
+ spin_unlock(&ioapic_list_lock);
+
+ if (!ioapic)
+ return AE_OK;
+
+ pci_release_region(ioapic->dev, 0);
+ pci_disable_device(ioapic->dev);
+ pci_dev_put(ioapic->dev);
+ kfree(ioapic);
return AE_OK;
}
static int acpiphp_configure_ioapics(acpi_handle handle)
{
+ ioapic_add(handle, 0, NULL, NULL);
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
ACPI_UINT32_MAX, ioapic_add, NULL, NULL);
return 0;
}
+static int acpiphp_unconfigure_ioapics(acpi_handle handle)
+{
+ ioapic_remove(handle, 0, NULL, NULL);
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+ ACPI_UINT32_MAX, ioapic_remove, NULL, NULL);
+ return 0;
+}
+
static int power_on_slot(struct acpiphp_slot *slot)
{
acpi_status status;
@@ -997,7 +1066,7 @@
* @handle: handle to acpi namespace
*
*/
-int acpiphp_bus_trim(acpi_handle handle)
+static int acpiphp_bus_trim(acpi_handle handle)
{
struct acpi_device *device;
int retval;
@@ -1074,10 +1143,11 @@
pci_bus_assign_resources(bus);
acpiphp_sanitize_bus(bus);
+ acpiphp_set_hpp_values(slot->bridge->handle, bus);
+ list_for_each_entry(func, &slot->funcs, sibling)
+ acpiphp_configure_ioapics(func->handle);
pci_enable_bridges(bus);
pci_bus_add_devices(bus);
- acpiphp_set_hpp_values(slot->bridge->handle, bus);
- acpiphp_configure_ioapics(slot->bridge->handle);
/* associate pci_dev to our representation */
list_for_each (l, &slot->funcs) {
@@ -1103,6 +1173,16 @@
return retval;
}
+static void disable_bridges(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ if (dev->subordinate) {
+ disable_bridges(dev->subordinate);
+ pci_disable_device(dev);
+ }
+ }
+}
/**
* disable_device - disable a slot
@@ -1127,6 +1207,19 @@
func->bridge = NULL;
}
+ if (func->pci_dev) {
+ pci_stop_bus_device(func->pci_dev);
+ if (func->pci_dev->subordinate) {
+ disable_bridges(func->pci_dev->subordinate);
+ pci_disable_device(func->pci_dev);
+ }
+ }
+ }
+
+ list_for_each (l, &slot->funcs) {
+ func = list_entry(l, struct acpiphp_func, sibling);
+
+ acpiphp_unconfigure_ioapics(func->handle);
acpiphp_bus_trim(func->handle);
/* try to remove anyway.
* acpiphp_bus_add might have been failed */
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index 317457d..d0a07d9 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -487,9 +487,7 @@
if (ACPI_FAILURE(status))
err("%s: Notification handler removal failed\n", __FUNCTION__);
/* remove the /sys entries */
- if (sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr))
- err("%s: removal of sysfs file apci_table failed\n",
- __FUNCTION__);
+ sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr);
}
module_init(ibm_acpiphp_init);
diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c
index 8b3da00..5bab666 100644
--- a/drivers/pci/hotplug/cpqphp_sysfs.c
+++ b/drivers/pci/hotplug/cpqphp_sysfs.c
@@ -140,7 +140,7 @@
static int open(struct inode *inode, struct file *file)
{
- struct controller *ctrl = inode->u.generic_ip;
+ struct controller *ctrl = inode->i_private;
struct ctrl_dbg *dbg;
int retval = -ENOMEM;
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index dd2b762..05a4f0f 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -176,7 +176,9 @@
struct pci_bus *bus = temp->bus;
struct pci_dev *dev;
int func;
+ int retval;
u8 hdr_type;
+
if (!pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type)) {
temp->hdr_type = hdr_type & 0x7f;
if (!pci_find_slot(bus->number, temp->devfn)) {
@@ -185,8 +187,12 @@
dbg("New device on %s function %x:%x\n",
bus->name, temp->devfn >> 3,
temp->devfn & 7);
- pci_bus_add_device(dev);
- add_slot(dev);
+ retval = pci_bus_add_device(dev);
+ if (retval)
+ dev_err(&dev->dev, "error adding "
+ "device, continuing.\n");
+ else
+ add_slot(dev);
}
}
/* multifunction device? */
@@ -205,8 +211,12 @@
dbg("New device on %s function %x:%x\n",
bus->name, temp->devfn >> 3,
temp->devfn & 7);
- pci_bus_add_device(dev);
- add_slot(dev);
+ retval = pci_bus_add_device(dev);
+ if (retval)
+ dev_err(&dev->dev, "error adding "
+ "device, continuing.\n");
+ else
+ add_slot(dev);
}
}
}
diff --git a/drivers/pci/hotplug/pci_hotplug.h b/drivers/pci/hotplug/pci_hotplug.h
index e929b7c..772523d 100644
--- a/drivers/pci/hotplug/pci_hotplug.h
+++ b/drivers/pci/hotplug/pci_hotplug.h
@@ -172,8 +172,8 @@
extern int pci_hp_register (struct hotplug_slot *slot);
extern int pci_hp_deregister (struct hotplug_slot *slot);
-extern int pci_hp_change_slot_info (struct hotplug_slot *slot,
- struct hotplug_slot_info *info);
+extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
+ struct hotplug_slot_info *info);
extern struct subsystem pci_hotplug_slots_subsys;
/* PCI Setting Record (Type 0) */
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index b7b378d..e2823ea 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -482,31 +482,95 @@
static int fs_add_slot (struct hotplug_slot *slot)
{
- if (has_power_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_power.attr);
+ int retval = 0;
- if (has_attention_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
+ if (has_power_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_power.attr);
+ if (retval)
+ goto exit_power;
+ }
- if (has_latch_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
+ if (has_attention_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_attention.attr);
+ if (retval)
+ goto exit_attention;
+ }
- if (has_adapter_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
+ if (has_latch_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_latch.attr);
+ if (retval)
+ goto exit_latch;
+ }
- if (has_address_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_address.attr);
+ if (has_adapter_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_presence.attr);
+ if (retval)
+ goto exit_adapter;
+ }
- if (has_max_bus_speed_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
+ if (has_address_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_address.attr);
+ if (retval)
+ goto exit_address;
+ }
+ if (has_max_bus_speed_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_max_bus_speed.attr);
+ if (retval)
+ goto exit_max_speed;
+ }
+
+ if (has_cur_bus_speed_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_cur_bus_speed.attr);
+ if (retval)
+ goto exit_cur_speed;
+ }
+
+ if (has_test_file(slot) == 0) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_test.attr);
+ if (retval)
+ goto exit_test;
+ }
+
+ goto exit;
+
+exit_test:
if (has_cur_bus_speed_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
+ sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
- if (has_test_file(slot) == 0)
- sysfs_create_file(&slot->kobj, &hotplug_slot_attr_test.attr);
+exit_cur_speed:
+ if (has_max_bus_speed_file(slot) == 0)
+ sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
- return 0;
+exit_max_speed:
+ if (has_address_file(slot) == 0)
+ sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_address.attr);
+
+exit_address:
+ if (has_adapter_file(slot) == 0)
+ sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
+
+exit_adapter:
+ if (has_latch_file(slot) == 0)
+ sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
+
+exit_latch:
+ if (has_attention_file(slot) == 0)
+ sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
+
+exit_attention:
+ if (has_power_file(slot) == 0)
+ sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
+exit_power:
+exit:
+ return retval;
}
static void fs_remove_slot (struct hotplug_slot *slot)
@@ -626,8 +690,11 @@
*
* Returns 0 if successful, anything else for an error.
*/
-int pci_hp_change_slot_info (struct hotplug_slot *slot, struct hotplug_slot_info *info)
+int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot,
+ struct hotplug_slot_info *info)
{
+ int retval;
+
if ((slot == NULL) || (info == NULL))
return -ENODEV;
@@ -636,32 +703,60 @@
* for the files referring to the fields that have now changed.
*/
if ((has_power_file(slot) == 0) &&
- (slot->info->power_status != info->power_status))
- sysfs_update_file(&slot->kobj, &hotplug_slot_attr_power.attr);
+ (slot->info->power_status != info->power_status)) {
+ retval = sysfs_update_file(&slot->kobj,
+ &hotplug_slot_attr_power.attr);
+ if (retval)
+ return retval;
+ }
if ((has_attention_file(slot) == 0) &&
- (slot->info->attention_status != info->attention_status))
- sysfs_update_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
+ (slot->info->attention_status != info->attention_status)) {
+ retval = sysfs_update_file(&slot->kobj,
+ &hotplug_slot_attr_attention.attr);
+ if (retval)
+ return retval;
+ }
if ((has_latch_file(slot) == 0) &&
- (slot->info->latch_status != info->latch_status))
- sysfs_update_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
+ (slot->info->latch_status != info->latch_status)) {
+ retval = sysfs_update_file(&slot->kobj,
+ &hotplug_slot_attr_latch.attr);
+ if (retval)
+ return retval;
+ }
if ((has_adapter_file(slot) == 0) &&
- (slot->info->adapter_status != info->adapter_status))
- sysfs_update_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
+ (slot->info->adapter_status != info->adapter_status)) {
+ retval = sysfs_update_file(&slot->kobj,
+ &hotplug_slot_attr_presence.attr);
+ if (retval)
+ return retval;
+ }
if ((has_address_file(slot) == 0) &&
- (slot->info->address != info->address))
- sysfs_update_file(&slot->kobj, &hotplug_slot_attr_address.attr);
+ (slot->info->address != info->address)) {
+ retval = sysfs_update_file(&slot->kobj,
+ &hotplug_slot_attr_address.attr);
+ if (retval)
+ return retval;
+ }
if ((has_max_bus_speed_file(slot) == 0) &&
- (slot->info->max_bus_speed != info->max_bus_speed))
- sysfs_update_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
+ (slot->info->max_bus_speed != info->max_bus_speed)) {
+ retval = sysfs_update_file(&slot->kobj,
+ &hotplug_slot_attr_max_bus_speed.attr);
+ if (retval)
+ return retval;
+ }
if ((has_cur_bus_speed_file(slot) == 0) &&
- (slot->info->cur_bus_speed != info->cur_bus_speed))
- sysfs_update_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
+ (slot->info->cur_bus_speed != info->cur_bus_speed)) {
+ retval = sysfs_update_file(&slot->kobj,
+ &hotplug_slot_attr_cur_bus_speed.attr);
+ if (retval)
+ return retval;
+ }
memcpy (slot->info, info, sizeof (struct hotplug_slot_info));
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 33d1987..41290a1 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -762,14 +762,14 @@
if (rc || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
mutex_unlock(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
if (MRL_SENS(p_slot->ctrl->ctrlcap)) {
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
mutex_unlock(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
}
@@ -778,7 +778,7 @@
if (rc || getstatus) {
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
mutex_unlock(&p_slot->ctrl->crit_sect);
- return 1;
+ return -EINVAL;
}
}
mutex_unlock(&p_slot->ctrl->crit_sect);
@@ -813,7 +813,7 @@
if (ret || !getstatus) {
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
mutex_unlock(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
}
@@ -822,7 +822,7 @@
if (ret || getstatus) {
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
mutex_unlock(&p_slot->ctrl->crit_sect);
- return 1;
+ return -ENODEV;
}
}
@@ -831,7 +831,7 @@
if (ret || !getstatus) {
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
mutex_unlock(&p_slot->ctrl->crit_sect);
- return 1;
+ return -EINVAL;
}
}
diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c
index 8ad4466..2b9e10e 100644
--- a/drivers/pci/hotplug/pcihp_skeleton.c
+++ b/drivers/pci/hotplug/pcihp_skeleton.c
@@ -1,5 +1,5 @@
/*
- * PCI Hot Plug Controller Skeleton Driver - 0.2
+ * PCI Hot Plug Controller Skeleton Driver - 0.3
*
* Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001,2003 IBM Corp.
@@ -21,7 +21,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * This driver is to be used as a skeleton driver to be show how to interface
+ * This driver is to be used as a skeleton driver to show how to interface
* with the pci hotplug core easily.
*
* Send feedback to <greg@kroah.com>
@@ -58,8 +58,6 @@
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
-
-
/* local variables */
static int debug;
static int num_slots;
@@ -109,7 +107,6 @@
return retval;
}
-
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
@@ -342,7 +339,7 @@
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
/*
* Do specific initialization stuff for your driver here
- * Like initializing your controller hardware (if any) and
+ * like initializing your controller hardware (if any) and
* determining the number of slots you have in the system
* right now.
*/
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 7208b95..c7103ac 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -173,7 +173,7 @@
#define msg_button_cancel "PCI slot #%s - action canceled due to button press.\n"
/* sysfs functions for the hotplug controller info */
-extern void shpchp_create_ctrl_files (struct controller *ctrl);
+extern int __must_check shpchp_create_ctrl_files(struct controller *ctrl);
extern int shpchp_sysfs_enable_slot(struct slot *slot);
extern int shpchp_sysfs_disable_slot(struct slot *slot);
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index a14e7de..235c18a 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -449,10 +449,14 @@
ctrl->speed = PCI_SPEED_33MHz;
}
- shpchp_create_ctrl_files(ctrl);
+ rc = shpchp_create_ctrl_files(ctrl);
+ if (rc)
+ goto err_cleanup_slots;
return 0;
+err_cleanup_slots:
+ cleanup_slots(ctrl);
err_out_release_ctlr:
ctrl->hpc_ops->release_ctlr(ctrl);
err_out_free_ctrl:
diff --git a/drivers/pci/hotplug/shpchp_sysfs.c b/drivers/pci/hotplug/shpchp_sysfs.c
index 620e113..29fa9d2 100644
--- a/drivers/pci/hotplug/shpchp_sysfs.c
+++ b/drivers/pci/hotplug/shpchp_sysfs.c
@@ -91,9 +91,9 @@
}
static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL);
-void shpchp_create_ctrl_files (struct controller *ctrl)
+int __must_check shpchp_create_ctrl_files (struct controller *ctrl)
{
- device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl);
+ return device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl);
}
void shpchp_remove_ctrl_files(struct controller *ctrl)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a83c1f5..27a0574 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -45,16 +45,10 @@
return 0;
}
-static void msi_cache_ctor(void *p, kmem_cache_t *cache, unsigned long flags)
-{
- memset(p, 0, sizeof(struct msi_desc));
-}
-
static int msi_cache_init(void)
{
- msi_cachep = kmem_cache_create("msi_cache",
- sizeof(struct msi_desc),
- 0, SLAB_HWCACHE_ALIGN, msi_cache_ctor, NULL);
+ msi_cachep = kmem_cache_create("msi_cache", sizeof(struct msi_desc),
+ 0, SLAB_HWCACHE_ALIGN, NULL, NULL);
if (!msi_cachep)
return -ENOMEM;
@@ -402,11 +396,10 @@
{
struct msi_desc *entry;
- entry = kmem_cache_alloc(msi_cachep, SLAB_KERNEL);
+ entry = kmem_cache_zalloc(msi_cachep, GFP_KERNEL);
if (!entry)
return NULL;
- memset(entry, 0, sizeof(struct msi_desc));
entry->link.tail = entry->link.head = 0; /* single message */
entry->dev = NULL;
@@ -901,6 +894,33 @@
}
/**
+ * pci_msi_supported - check whether MSI may be enabled on device
+ * @dev: pointer to the pci_dev data structure of MSI device function
+ *
+ * MSI must be globally enabled and supported by the device and its root
+ * bus. But, the root bus is not easy to find since some architectures
+ * have virtual busses on top of the PCI hierarchy (for instance the
+ * hypertransport bus), while the actual bus where MSI must be supported
+ * is below. So we test the MSI flag on all parent busses and assume
+ * that no quirk will ever set the NO_MSI flag on a non-root bus.
+ **/
+static
+int pci_msi_supported(struct pci_dev * dev)
+{
+ struct pci_bus *bus;
+
+ if (!pci_msi_enable || !dev || dev->no_msi)
+ return -EINVAL;
+
+ /* check MSI flags of all parent busses */
+ for (bus = dev->bus; bus; bus = bus->parent)
+ if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
* pci_enable_msi - configure device's MSI capability structure
* @dev: pointer to the pci_dev data structure of MSI device function
*
@@ -912,19 +932,11 @@
**/
int pci_enable_msi(struct pci_dev* dev)
{
- struct pci_bus *bus;
- int pos, temp, status = -EINVAL;
+ int pos, temp, status;
u16 control;
- if (!pci_msi_enable || !dev)
- return status;
-
- if (dev->no_msi)
- return status;
-
- for (bus = dev->bus; bus; bus = bus->parent)
- if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)
- return -EINVAL;
+ if (pci_msi_supported(dev) < 0)
+ return -EINVAL;
temp = dev->irq;
@@ -1134,22 +1146,14 @@
**/
int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
{
- struct pci_bus *bus;
int status, pos, nr_entries, free_vectors;
int i, j, temp;
u16 control;
unsigned long flags;
- if (!pci_msi_enable || !dev || !entries)
+ if (!entries || pci_msi_supported(dev) < 0)
return -EINVAL;
- if (dev->no_msi)
- return -EINVAL;
-
- for (bus = dev->bus; bus; bus = bus->parent)
- if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)
- return -EINVAL;
-
status = msi_init();
if (status < 0)
return status;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 474e9cd..b1c0c70 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -17,6 +17,16 @@
* Registration of PCI drivers and handling of hot-pluggable devices.
*/
+/* multithreaded probe logic */
+static int pci_multithread_probe =
+#ifdef CONFIG_PCI_MULTITHREAD_PROBE
+ 1;
+#else
+ 0;
+#endif
+__module_param_call("", pci_multithread_probe, param_set_bool, param_get_bool, &pci_multithread_probe, 0644);
+
+
/*
* Dynamic device IDs are disabled for !CONFIG_HOTPLUG
*/
@@ -46,6 +56,7 @@
subdevice=PCI_ANY_ID, class=0, class_mask=0;
unsigned long driver_data=0;
int fields=0;
+ int retval = 0;
fields = sscanf(buf, "%x %x %x %x %x %x %lux",
&vendor, &device, &subvendor, &subdevice,
@@ -72,10 +83,12 @@
spin_unlock(&pdrv->dynids.lock);
if (get_driver(&pdrv->driver)) {
- driver_attach(&pdrv->driver);
+ retval = driver_attach(&pdrv->driver);
put_driver(&pdrv->driver);
}
+ if (retval)
+ return retval;
return count;
}
static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
@@ -279,6 +292,18 @@
return i;
}
+static int pci_device_suspend_late(struct device * dev, pm_message_t state)
+{
+ struct pci_dev * pci_dev = to_pci_dev(dev);
+ struct pci_driver * drv = pci_dev->driver;
+ int i = 0;
+
+ if (drv && drv->suspend_late) {
+ i = drv->suspend_late(pci_dev, state);
+ suspend_report_result(drv->suspend_late, i);
+ }
+ return i;
+}
/*
* Default resume method for devices that have no driver provided resume,
@@ -313,6 +338,17 @@
return error;
}
+static int pci_device_resume_early(struct device * dev)
+{
+ int error = 0;
+ struct pci_dev * pci_dev = to_pci_dev(dev);
+ struct pci_driver * drv = pci_dev->driver;
+
+ if (drv && drv->resume_early)
+ error = drv->resume_early(pci_dev);
+ return error;
+}
+
static void pci_device_shutdown(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -386,6 +422,11 @@
drv->driver.owner = owner;
drv->driver.kobj.ktype = &pci_driver_kobj_type;
+ if (pci_multithread_probe)
+ drv->driver.multithread_probe = pci_multithread_probe;
+ else
+ drv->driver.multithread_probe = drv->multithread_probe;
+
spin_lock_init(&drv->dynids.lock);
INIT_LIST_HEAD(&drv->dynids.list);
@@ -509,8 +550,10 @@
.probe = pci_device_probe,
.remove = pci_device_remove,
.suspend = pci_device_suspend,
- .shutdown = pci_device_shutdown,
+ .suspend_late = pci_device_suspend_late,
+ .resume_early = pci_device_resume_early,
.resume = pci_device_resume,
+ .shutdown = pci_device_shutdown,
.dev_attrs = pci_dev_attrs,
};
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index fdefa7d..a1d2e97 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -117,6 +117,7 @@
const char *buf, size_t count)
{
struct pci_dev *pdev = to_pci_dev(dev);
+ int retval = 0;
/* this can crash the machine when done on the "wrong" device */
if (!capable(CAP_SYS_ADMIN))
@@ -126,11 +127,53 @@
pci_disable_device(pdev);
if (*buf == '1')
- pci_enable_device(pdev);
+ retval = pci_enable_device(pdev);
+ if (retval)
+ return retval;
return count;
}
+static ssize_t
+msi_bus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ if (!pdev->subordinate)
+ return 0;
+
+ return sprintf (buf, "%u\n",
+ !(pdev->subordinate->bus_flags & PCI_BUS_FLAGS_NO_MSI));
+}
+
+static ssize_t
+msi_bus_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ /* bad things may happen if the no_msi flag is changed
+ * while some drivers are loaded */
+ if (!capable(CAP_SYS_ADMIN))
+ return count;
+
+ if (!pdev->subordinate)
+ return count;
+
+ if (*buf == '0') {
+ pdev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ dev_warn(&pdev->dev, "forced subordinate bus to not support MSI,"
+ " bad things could happen.\n");
+ }
+
+ if (*buf == '1') {
+ pdev->subordinate->bus_flags &= ~PCI_BUS_FLAGS_NO_MSI;
+ dev_warn(&pdev->dev, "forced subordinate bus to support MSI,"
+ " bad things could happen.\n");
+ }
+
+ return count;
+}
struct device_attribute pci_dev_attrs[] = {
__ATTR_RO(resource),
@@ -145,6 +188,7 @@
__ATTR(enable, 0600, is_enabled_show, is_enabled_store),
__ATTR(broken_parity_status,(S_IRUGO|S_IWUSR),
broken_parity_status_show,broken_parity_status_store),
+ __ATTR(msi_bus, 0644, msi_bus_show, msi_bus_store),
__ATTR_NULL,
};
@@ -385,15 +429,38 @@
}
/**
+ * pci_remove_resource_files - cleanup resource files
+ * @dev: dev to cleanup
+ *
+ * If we created resource files for @dev, remove them from sysfs and
+ * free their resources.
+ */
+static void
+pci_remove_resource_files(struct pci_dev *pdev)
+{
+ int i;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+ struct bin_attribute *res_attr;
+
+ res_attr = pdev->res_attr[i];
+ if (res_attr) {
+ sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+ kfree(res_attr);
+ }
+ }
+}
+
+/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
*
* Walk the resources in @dev creating files for each resource available.
*/
-static void
-pci_create_resource_files(struct pci_dev *pdev)
+static int pci_create_resource_files(struct pci_dev *pdev)
{
int i;
+ int retval;
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
@@ -416,35 +483,19 @@
res_attr->size = pci_resource_len(pdev, i);
res_attr->mmap = pci_mmap_resource;
res_attr->private = &pdev->resource[i];
- sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ if (retval) {
+ pci_remove_resource_files(pdev);
+ return retval;
+ }
+ } else {
+ return -ENOMEM;
}
}
-}
-
-/**
- * pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
- *
- * If we created resource files for @dev, remove them from sysfs and
- * free their resources.
- */
-static void
-pci_remove_resource_files(struct pci_dev *pdev)
-{
- int i;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- struct bin_attribute *res_attr;
-
- res_attr = pdev->res_attr[i];
- if (res_attr) {
- sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
- kfree(res_attr);
- }
- }
+ return 0;
}
#else /* !HAVE_PCI_MMAP */
-static inline void pci_create_resource_files(struct pci_dev *dev) { return; }
+static inline int pci_create_resource_files(struct pci_dev *dev) { return 0; }
static inline void pci_remove_resource_files(struct pci_dev *dev) { return; }
#endif /* HAVE_PCI_MMAP */
@@ -529,22 +580,27 @@
.write = pci_write_config,
};
-int pci_create_sysfs_dev_files (struct pci_dev *pdev)
+int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
{
+ struct bin_attribute *rom_attr = NULL;
+ int retval;
+
if (!sysfs_initialized)
return -EACCES;
if (pdev->cfg_size < 4096)
- sysfs_create_bin_file(&pdev->dev.kobj, &pci_config_attr);
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pci_config_attr);
else
- sysfs_create_bin_file(&pdev->dev.kobj, &pcie_config_attr);
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pcie_config_attr);
+ if (retval)
+ goto err;
- pci_create_resource_files(pdev);
+ retval = pci_create_resource_files(pdev);
+ if (retval)
+ goto err_bin_file;
/* If the device has a ROM, try to expose it in sysfs. */
if (pci_resource_len(pdev, PCI_ROM_RESOURCE)) {
- struct bin_attribute *rom_attr;
-
rom_attr = kzalloc(sizeof(*rom_attr), GFP_ATOMIC);
if (rom_attr) {
pdev->rom_attr = rom_attr;
@@ -554,13 +610,28 @@
rom_attr->attr.owner = THIS_MODULE;
rom_attr->read = pci_read_rom;
rom_attr->write = pci_write_rom;
- sysfs_create_bin_file(&pdev->dev.kobj, rom_attr);
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, rom_attr);
+ if (retval)
+ goto err_rom;
+ } else {
+ retval = -ENOMEM;
+ goto err_bin_file;
}
}
/* add platform-specific attributes */
pcibios_add_platform_entries(pdev);
-
+
return 0;
+
+err_rom:
+ kfree(rom_attr);
+err_bin_file:
+ if (pdev->cfg_size < 4096)
+ sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr);
+ else
+ sysfs_remove_bin_file(&pdev->dev.kobj, &pcie_config_attr);
+err:
+ return retval;
}
/**
@@ -589,10 +660,14 @@
static int __init pci_sysfs_init(void)
{
struct pci_dev *pdev = NULL;
-
+ int retval;
+
sysfs_initialized = 1;
- for_each_pci_dev(pdev)
- pci_create_sysfs_dev_files(pdev);
+ for_each_pci_dev(pdev) {
+ retval = pci_create_sysfs_dev_files(pdev);
+ if (retval)
+ return retval;
+ }
return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 9f79dd6..a544997 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -432,10 +432,12 @@
case PM_EVENT_ON:
return PCI_D0;
case PM_EVENT_FREEZE:
+ case PM_EVENT_PRETHAW:
+ /* REVISIT both freeze and pre-thaw "should" use D0 */
case PM_EVENT_SUSPEND:
return PCI_D3hot;
default:
- printk("They asked me for state %d\n", state.event);
+ printk("Unrecognized suspend event %d\n", state.event);
BUG();
}
return PCI_D0;
@@ -443,6 +445,51 @@
EXPORT_SYMBOL(pci_choose_state);
+static int pci_save_pcie_state(struct pci_dev *dev)
+{
+ int pos, i = 0;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pos <= 0)
+ return 0;
+
+ save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 4, GFP_KERNEL);
+ if (!save_state) {
+ dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+ return -ENOMEM;
+ }
+ cap = (u16 *)&save_state->data[0];
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ pci_add_saved_cap(dev, save_state);
+ return 0;
+}
+
+static void pci_restore_pcie_state(struct pci_dev *dev)
+{
+ int i = 0, pos;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!save_state || pos <= 0)
+ return;
+ cap = (u16 *)&save_state->data[0];
+
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ pci_remove_saved_cap(save_state);
+ kfree(save_state);
+}
+
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
@@ -458,6 +505,8 @@
return i;
if ((i = pci_save_msix_state(dev)) != 0)
return i;
+ if ((i = pci_save_pcie_state(dev)) != 0)
+ return i;
return 0;
}
@@ -471,6 +520,9 @@
int i;
int val;
+ /* PCI Express register must be restored first */
+ pci_restore_pcie_state(dev);
+
/*
* The Base Address register should be programmed before the command
* register(s)
@@ -953,13 +1005,12 @@
}
str = k;
}
- return 1;
+ return 0;
}
+early_param("pci", pci_setup);
device_initcall(pci_init);
-__setup("pci=", pci_setup);
-
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
/* FIXME: Some boxes have multiple ISA bridges! */
struct pci_dev *isa_bridge;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 08d58fc..6bf327d 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -42,7 +42,7 @@
/* Lock for read/write access to pci device and bus lists */
extern struct rw_semaphore pci_bus_sem;
-#ifdef CONFIG_X86_IO_APIC
+#ifdef CONFIG_PCI_MSI
extern int pci_msi_quirk;
#else
#define pci_msi_quirk 0
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 1012db8..0ad92a8 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -34,3 +34,4 @@
When in doubt, say N.
+source "drivers/pci/pcie/aer/Kconfig"
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 984fa87..e00fb99 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -5,3 +5,6 @@
pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
+
+# Build PCI Express AER if needed
+obj-$(CONFIG_PCIEAER) += aer/
diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
new file mode 100644
index 0000000..3f37a60
--- /dev/null
+++ b/drivers/pci/pcie/aer/Kconfig
@@ -0,0 +1,12 @@
+#
+# PCI Express Root Port Device AER Configuration
+#
+
+config PCIEAER
+ boolean "Root Port Advanced Error Reporting support"
+ depends on PCIEPORTBUS && ACPI
+ default y
+ help
+ This enables PCI Express Root Port Advanced Error Reporting
+ (AER) driver support. Error reporting messages sent to Root
+ Port will be handled by PCI Express AER driver.
diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile
new file mode 100644
index 0000000..15a4f40
--- /dev/null
+++ b/drivers/pci/pcie/aer/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for PCI-Express Root Port Advanced Error Reporting Driver
+#
+
+obj-$(CONFIG_PCIEAER) += aerdriver.o
+
+aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o
+
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
new file mode 100644
index 0000000..0d4ac02
--- /dev/null
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -0,0 +1,346 @@
+/*
+ * drivers/pci/pcie/aer/aerdrv.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file implements the AER root port service driver. The driver will
+ * register an irq handler. When root port triggers an AER interrupt, the irq
+ * handler will collect root port status and schedule a work.
+ *
+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pcieport_if.h>
+
+#include "aerdrv.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_AUTHOR "tom.l.nguyen@intel.com"
+#define DRIVER_DESC "Root Port Advanced Error Reporting Driver"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static int __devinit aer_probe (struct pcie_device *dev,
+ const struct pcie_port_service_id *id );
+static void aer_remove(struct pcie_device *dev);
+static int aer_suspend(struct pcie_device *dev, pm_message_t state)
+{return 0;}
+static int aer_resume(struct pcie_device *dev) {return 0;}
+static pci_ers_result_t aer_error_detected(struct pci_dev *dev,
+ enum pci_channel_state error);
+static void aer_error_resume(struct pci_dev *dev);
+static pci_ers_result_t aer_root_reset(struct pci_dev *dev);
+
+/*
+ * PCI Express bus's AER Root service driver data structure
+ */
+static struct pcie_port_service_id aer_id[] = {
+ {
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .port_type = PCIE_RC_PORT,
+ .service_type = PCIE_PORT_SERVICE_AER,
+ },
+ { /* end: all zeroes */ }
+};
+
+static struct pci_error_handlers aer_error_handlers = {
+ .error_detected = aer_error_detected,
+ .resume = aer_error_resume,
+};
+
+static struct pcie_port_service_driver aerdrv = {
+ .name = "aer",
+ .id_table = &aer_id[0],
+
+ .probe = aer_probe,
+ .remove = aer_remove,
+
+ .suspend = aer_suspend,
+ .resume = aer_resume,
+
+ .err_handler = &aer_error_handlers,
+
+ .reset_link = aer_root_reset,
+};
+
+/**
+ * aer_irq - Root Port's ISR
+ * @irq: IRQ assigned to Root Port
+ * @context: pointer to Root Port data structure
+ * @r: pointer struct pt_regs
+ *
+ * Invoked when Root Port detects AER messages.
+ **/
+static irqreturn_t aer_irq(int irq, void *context, struct pt_regs * r)
+{
+ unsigned int status, id;
+ struct pcie_device *pdev = (struct pcie_device *)context;
+ struct aer_rpc *rpc = get_service_data(pdev);
+ int next_prod_idx;
+ unsigned long flags;
+ int pos;
+
+ pos = pci_find_aer_capability(pdev->port);
+ /*
+ * Must lock access to Root Error Status Reg, Root Error ID Reg,
+ * and Root error producer/consumer index
+ */
+ spin_lock_irqsave(&rpc->e_lock, flags);
+
+ /* Read error status */
+ pci_read_config_dword(pdev->port, pos + PCI_ERR_ROOT_STATUS, &status);
+ if (!(status & ROOT_ERR_STATUS_MASKS)) {
+ spin_unlock_irqrestore(&rpc->e_lock, flags);
+ return IRQ_NONE;
+ }
+
+ /* Read error source and clear error status */
+ pci_read_config_dword(pdev->port, pos + PCI_ERR_ROOT_COR_SRC, &id);
+ pci_write_config_dword(pdev->port, pos + PCI_ERR_ROOT_STATUS, status);
+
+ /* Store error source for later DPC handler */
+ next_prod_idx = rpc->prod_idx + 1;
+ if (next_prod_idx == AER_ERROR_SOURCES_MAX)
+ next_prod_idx = 0;
+ if (next_prod_idx == rpc->cons_idx) {
+ /*
+ * Error Storm Condition - possibly the same error occurred.
+ * Drop the error.
+ */
+ spin_unlock_irqrestore(&rpc->e_lock, flags);
+ return IRQ_HANDLED;
+ }
+ rpc->e_sources[rpc->prod_idx].status = status;
+ rpc->e_sources[rpc->prod_idx].id = id;
+ rpc->prod_idx = next_prod_idx;
+ spin_unlock_irqrestore(&rpc->e_lock, flags);
+
+ /* Invoke DPC handler */
+ schedule_work(&rpc->dpc_handler);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * aer_alloc_rpc - allocate Root Port data structure
+ * @dev: pointer to the pcie_dev data structure
+ *
+ * Invoked when Root Port's AER service is loaded.
+ **/
+static struct aer_rpc* aer_alloc_rpc(struct pcie_device *dev)
+{
+ struct aer_rpc *rpc;
+
+ if (!(rpc = (struct aer_rpc *)kmalloc(sizeof(struct aer_rpc),
+ GFP_KERNEL)))
+ return NULL;
+
+ memset(rpc, 0, sizeof(struct aer_rpc));
+ /*
+ * Initialize Root lock access, e_lock, to Root Error Status Reg,
+ * Root Error ID Reg, and Root error producer/consumer index.
+ */
+ rpc->e_lock = SPIN_LOCK_UNLOCKED;
+
+ rpc->rpd = dev;
+ INIT_WORK(&rpc->dpc_handler, aer_isr, (void *)dev);
+ rpc->prod_idx = rpc->cons_idx = 0;
+ mutex_init(&rpc->rpc_mutex);
+ init_waitqueue_head(&rpc->wait_release);
+
+ /* Use PCIE bus function to store rpc into PCIE device */
+ set_service_data(dev, rpc);
+
+ return rpc;
+}
+
+/**
+ * aer_remove - clean up resources
+ * @dev: pointer to the pcie_dev data structure
+ *
+ * Invoked when PCI Express bus unloads or AER probe fails.
+ **/
+static void aer_remove(struct pcie_device *dev)
+{
+ struct aer_rpc *rpc = get_service_data(dev);
+
+ if (rpc) {
+ /* If register interrupt service, it must be free. */
+ if (rpc->isr)
+ free_irq(dev->irq, dev);
+
+ wait_event(rpc->wait_release, rpc->prod_idx == rpc->cons_idx);
+
+ aer_delete_rootport(rpc);
+ set_service_data(dev, NULL);
+ }
+}
+
+/**
+ * aer_probe - initialize resources
+ * @dev: pointer to the pcie_dev data structure
+ * @id: pointer to the service id data structure
+ *
+ * Invoked when PCI Express bus loads AER service driver.
+ **/
+static int __devinit aer_probe (struct pcie_device *dev,
+ const struct pcie_port_service_id *id )
+{
+ int status;
+ struct aer_rpc *rpc;
+ struct device *device = &dev->device;
+
+ /* Init */
+ if ((status = aer_init(dev)))
+ return status;
+
+ /* Alloc rpc data structure */
+ if (!(rpc = aer_alloc_rpc(dev))) {
+ printk(KERN_DEBUG "%s: Alloc rpc fails on PCIE device[%s]\n",
+ __FUNCTION__, device->bus_id);
+ aer_remove(dev);
+ return -ENOMEM;
+ }
+
+ /* Request IRQ ISR */
+ if ((status = request_irq(dev->irq, aer_irq, SA_SHIRQ, "aerdrv",
+ dev))) {
+ printk(KERN_DEBUG "%s: Request ISR fails on PCIE device[%s]\n",
+ __FUNCTION__, device->bus_id);
+ aer_remove(dev);
+ return status;
+ }
+
+ rpc->isr = 1;
+
+ aer_enable_rootport(rpc);
+
+ return status;
+}
+
+/**
+ * aer_root_reset - reset link on Root Port
+ * @dev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver when performing link reset at Root Port.
+ **/
+static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
+{
+ u16 p2p_ctrl;
+ u32 status;
+ int pos;
+
+ pos = pci_find_aer_capability(dev);
+
+ /* Disable Root's interrupt in response to error messages */
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, 0);
+
+ /* Assert Secondary Bus Reset */
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
+ p2p_ctrl |= PCI_CB_BRIDGE_CTL_CB_RESET;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
+
+ /* De-assert Secondary Bus Reset */
+ p2p_ctrl &= ~PCI_CB_BRIDGE_CTL_CB_RESET;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
+
+ /*
+ * System software must wait for at least 100ms from the end
+ * of a reset of one or more device before it is permitted
+ * to issue Configuration Requests to those devices.
+ */
+ msleep(200);
+ printk(KERN_DEBUG "Complete link reset at Root[%s]\n", dev->dev.bus_id);
+
+ /* Enable Root Port's interrupt in response to error messages */
+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, status);
+ pci_write_config_dword(dev,
+ pos + PCI_ERR_ROOT_COMMAND,
+ ROOT_PORT_INTR_ON_MESG_MASK);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * aer_error_detected - update severity status
+ * @dev: pointer to Root Port's pci_dev data structure
+ * @error: error severity being notified by port bus
+ *
+ * Invoked by Port Bus driver during error recovery.
+ **/
+static pci_ers_result_t aer_error_detected(struct pci_dev *dev,
+ enum pci_channel_state error)
+{
+ /* Root Port has no impact. Always recovers. */
+ return PCI_ERS_RESULT_CAN_RECOVER;
+}
+
+/**
+ * aer_error_resume - clean up corresponding error status bits
+ * @dev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver during nonfatal recovery.
+ **/
+static void aer_error_resume(struct pci_dev *dev)
+{
+ int pos;
+ u32 status, mask;
+ u16 reg16;
+
+ /* Clean up Root device status */
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, ®16);
+ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, reg16);
+
+ /* Clean AER Root Error Status */
+ pos = pci_find_aer_capability(dev);
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
+ if (dev->error_state == pci_channel_io_normal)
+ status &= ~mask; /* Clear corresponding nonfatal bits */
+ else
+ status &= mask; /* Clear corresponding fatal bits */
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
+}
+
+/**
+ * aer_service_init - register AER root service driver
+ *
+ * Invoked when AER root service driver is loaded.
+ **/
+static int __init aer_service_init(void)
+{
+ return pcie_port_service_register(&aerdrv);
+}
+
+/**
+ * aer_service_exit - unregister AER root service driver
+ *
+ * Invoked when AER root service driver is unloaded.
+ **/
+static void __exit aer_service_exit(void)
+{
+ pcie_port_service_unregister(&aerdrv);
+}
+
+module_init(aer_service_init);
+module_exit(aer_service_exit);
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
new file mode 100644
index 0000000..daf0cad
--- /dev/null
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ */
+
+#ifndef _AERDRV_H_
+#define _AERDRV_H_
+
+#include <linux/pcieport_if.h>
+#include <linux/aer.h>
+
+#define AER_NONFATAL 0
+#define AER_FATAL 1
+#define AER_CORRECTABLE 2
+#define AER_UNCORRECTABLE 4
+#define AER_ERROR_MASK 0x001fffff
+#define AER_ERROR(d) (d & AER_ERROR_MASK)
+
+#define OSC_METHOD_RUN_SUCCESS 0
+#define OSC_METHOD_NOT_SUPPORTED 1
+#define OSC_METHOD_RUN_FAILURE 2
+
+/* Root Error Status Register Bits */
+#define ROOT_ERR_STATUS_MASKS 0x0f
+
+#define SYSTEM_ERROR_INTR_ON_MESG_MASK (PCI_EXP_RTCTL_SECEE| \
+ PCI_EXP_RTCTL_SENFEE| \
+ PCI_EXP_RTCTL_SEFEE)
+#define ROOT_PORT_INTR_ON_MESG_MASK (PCI_ERR_ROOT_CMD_COR_EN| \
+ PCI_ERR_ROOT_CMD_NONFATAL_EN| \
+ PCI_ERR_ROOT_CMD_FATAL_EN)
+#define ERR_COR_ID(d) (d & 0xffff)
+#define ERR_UNCOR_ID(d) (d >> 16)
+
+#define AER_SUCCESS 0
+#define AER_UNSUCCESS 1
+#define AER_ERROR_SOURCES_MAX 100
+
+#define AER_LOG_TLP_MASKS (PCI_ERR_UNC_POISON_TLP| \
+ PCI_ERR_UNC_ECRC| \
+ PCI_ERR_UNC_UNSUP| \
+ PCI_ERR_UNC_COMP_ABORT| \
+ PCI_ERR_UNC_UNX_COMP| \
+ PCI_ERR_UNC_MALF_TLP)
+
+/* AER Error Info Flags */
+#define AER_TLP_HEADER_VALID_FLAG 0x00000001
+#define AER_MULTI_ERROR_VALID_FLAG 0x00000002
+
+#define ERR_CORRECTABLE_ERROR_MASK 0x000031c1
+#define ERR_UNCORRECTABLE_ERROR_MASK 0x001ff010
+
+struct header_log_regs {
+ unsigned int dw0;
+ unsigned int dw1;
+ unsigned int dw2;
+ unsigned int dw3;
+};
+
+struct aer_err_info {
+ int severity; /* 0:NONFATAL | 1:FATAL | 2:COR */
+ int flags;
+ unsigned int status; /* COR/UNCOR Error Status */
+ struct header_log_regs tlp; /* TLP Header */
+};
+
+struct aer_err_source {
+ unsigned int status;
+ unsigned int id;
+};
+
+struct aer_rpc {
+ struct pcie_device *rpd; /* Root Port device */
+ struct work_struct dpc_handler;
+ struct aer_err_source e_sources[AER_ERROR_SOURCES_MAX];
+ unsigned short prod_idx; /* Error Producer Index */
+ unsigned short cons_idx; /* Error Consumer Index */
+ int isr;
+ spinlock_t e_lock; /*
+ * Lock access to Error Status/ID Regs
+ * and error producer/consumer index
+ */
+ struct mutex rpc_mutex; /*
+ * only one thread could do
+ * recovery on the same
+ * root port hierachy
+ */
+ wait_queue_head_t wait_release;
+};
+
+struct aer_broadcast_data {
+ enum pci_channel_state state;
+ enum pci_ers_result result;
+};
+
+static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
+ enum pci_ers_result new)
+{
+ switch (orig) {
+ case PCI_ERS_RESULT_CAN_RECOVER:
+ case PCI_ERS_RESULT_RECOVERED:
+ orig = new;
+ break;
+ case PCI_ERS_RESULT_DISCONNECT:
+ if (new == PCI_ERS_RESULT_NEED_RESET)
+ orig = new;
+ break;
+ default:
+ break;
+ }
+
+ return orig;
+}
+
+extern struct bus_type pcie_port_bus_type;
+extern void aer_enable_rootport(struct aer_rpc *rpc);
+extern void aer_delete_rootport(struct aer_rpc *rpc);
+extern int aer_init(struct pcie_device *dev);
+extern void aer_isr(void *context);
+extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
+extern int aer_osc_setup(struct pci_dev *dev);
+
+#endif //_AERDRV_H_
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
new file mode 100644
index 0000000..fa68e89
--- /dev/null
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -0,0 +1,68 @@
+/*
+ * Access ACPI _OSC method
+ *
+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/delay.h>
+#include "aerdrv.h"
+
+/**
+ * aer_osc_setup - run ACPI _OSC method
+ *
+ * Return:
+ * Zero if success. Nonzero for otherwise.
+ *
+ * Invoked when PCIE bus loads AER service driver. To avoid conflict with
+ * BIOS AER support requires BIOS to yield AER control to OS native driver.
+ **/
+int aer_osc_setup(struct pci_dev *dev)
+{
+ int retval = OSC_METHOD_RUN_SUCCESS;
+ acpi_status status;
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+ struct pci_dev *pdev = dev;
+ struct pci_bus *parent;
+
+ while (!handle) {
+ if (!pdev || !pdev->bus->parent)
+ break;
+ parent = pdev->bus->parent;
+ if (!parent->self)
+ /* Parent must be a host bridge */
+ handle = acpi_get_pci_rootbridge_handle(
+ pci_domain_nr(parent),
+ parent->number);
+ else
+ handle = DEVICE_ACPI_HANDLE(
+ &(parent->self->dev));
+ pdev = parent->self;
+ }
+
+ if (!handle)
+ return OSC_METHOD_NOT_SUPPORTED;
+
+ pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
+ status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_SUPPORT)
+ retval = OSC_METHOD_NOT_SUPPORTED;
+ else
+ retval = OSC_METHOD_RUN_FAILURE;
+ }
+
+ return retval;
+}
+
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
new file mode 100644
index 0000000..1c7e660
--- /dev/null
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -0,0 +1,758 @@
+/*
+ * drivers/pci/pcie/aer/aerdrv_core.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file implements the core part of PCI-Express AER. When an pci-express
+ * error is delivered, an error message will be collected and printed to
+ * console, then, an error recovery procedure will be executed by following
+ * the pci error recovery rules.
+ *
+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/delay.h>
+#include "aerdrv.h"
+
+static int forceload;
+module_param(forceload, bool, 0);
+
+#define PCI_CFG_SPACE_SIZE (0x100)
+int pci_find_aer_capability(struct pci_dev *dev)
+{
+ int pos;
+ u32 reg32 = 0;
+
+ /* Check if it's a pci-express device */
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return 0;
+
+ /* Check if it supports pci-express AER */
+ pos = PCI_CFG_SPACE_SIZE;
+ while (pos) {
+ if (pci_read_config_dword(dev, pos, ®32))
+ return 0;
+
+ /* some broken boards return ~0 */
+ if (reg32 == 0xffffffff)
+ return 0;
+
+ if (PCI_EXT_CAP_ID(reg32) == PCI_EXT_CAP_ID_ERR)
+ break;
+
+ pos = reg32 >> 20;
+ }
+
+ return pos;
+}
+
+int pci_enable_pcie_error_reporting(struct pci_dev *dev)
+{
+ u16 reg16 = 0;
+ int pos;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return -EIO;
+
+ pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, ®16);
+ reg16 = reg16 |
+ PCI_EXP_DEVCTL_CERE |
+ PCI_EXP_DEVCTL_NFERE |
+ PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_URRE;
+ pci_write_config_word(dev, pos+PCI_EXP_DEVCTL,
+ reg16);
+ return 0;
+}
+
+int pci_disable_pcie_error_reporting(struct pci_dev *dev)
+{
+ u16 reg16 = 0;
+ int pos;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return -EIO;
+
+ pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, ®16);
+ reg16 = reg16 & ~(PCI_EXP_DEVCTL_CERE |
+ PCI_EXP_DEVCTL_NFERE |
+ PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_URRE);
+ pci_write_config_word(dev, pos+PCI_EXP_DEVCTL,
+ reg16);
+ return 0;
+}
+
+int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
+{
+ int pos;
+ u32 status, mask;
+
+ pos = pci_find_aer_capability(dev);
+ if (!pos)
+ return -EIO;
+
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
+ if (dev->error_state == pci_channel_io_normal)
+ status &= ~mask; /* Clear corresponding nonfatal bits */
+ else
+ status &= mask; /* Clear corresponding fatal bits */
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
+
+ return 0;
+}
+
+static int find_device_iter(struct device *device, void *data)
+{
+ struct pci_dev *dev;
+ u16 id = *(unsigned long *)data;
+ u8 secondary, subordinate, d_bus = id >> 8;
+
+ if (device->bus == &pci_bus_type) {
+ dev = to_pci_dev(device);
+ if (id == ((dev->bus->number << 8) | dev->devfn)) {
+ /*
+ * Device ID match
+ */
+ *(unsigned long*)data = (unsigned long)device;
+ return 1;
+ }
+
+ /*
+ * If device is P2P, check if it is an upstream?
+ */
+ if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) {
+ pci_read_config_byte(dev, PCI_SECONDARY_BUS,
+ &secondary);
+ pci_read_config_byte(dev, PCI_SUBORDINATE_BUS,
+ &subordinate);
+ if (d_bus >= secondary && d_bus <= subordinate) {
+ *(unsigned long*)data = (unsigned long)device;
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * find_source_device - search through device hierarchy for source device
+ * @p_dev: pointer to Root Port pci_dev data structure
+ * @id: device ID of agent who sends an error message to this Root Port
+ *
+ * Invoked when error is detected at the Root Port.
+ **/
+static struct device* find_source_device(struct pci_dev *parent, u16 id)
+{
+ struct pci_dev *dev = parent;
+ struct device *device;
+ unsigned long device_addr;
+ int status;
+
+ /* Is Root Port an agent that sends error message? */
+ if (id == ((dev->bus->number << 8) | dev->devfn))
+ return &dev->dev;
+
+ do {
+ device_addr = id;
+ if ((status = device_for_each_child(&dev->dev,
+ &device_addr, find_device_iter))) {
+ device = (struct device*)device_addr;
+ dev = to_pci_dev(device);
+ if (id == ((dev->bus->number << 8) | dev->devfn))
+ return device;
+ }
+ }while (status);
+
+ return NULL;
+}
+
+static void report_error_detected(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+ result_data = (struct aer_broadcast_data *) data;
+
+ dev->error_state = result_data->state;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->error_detected) {
+ if (result_data->state == pci_channel_io_frozen &&
+ !(dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) {
+ /*
+ * In case of fatal recovery, if one of down-
+ * stream device has no driver. We might be
+ * unable to recover because a later insmod
+ * of a driver for this device is unaware of
+ * its hw state.
+ */
+ printk(KERN_DEBUG "Device ID[%s] has %s\n",
+ dev->dev.bus_id, (dev->driver) ?
+ "no AER-aware driver" : "no driver");
+ }
+ return;
+ }
+
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->error_detected(dev, result_data->state);
+ result_data->result = merge_result(result_data->result, vote);
+ return;
+}
+
+static void report_mmio_enabled(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+ result_data = (struct aer_broadcast_data *) data;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->mmio_enabled)
+ return;
+
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->mmio_enabled(dev);
+ result_data->result = merge_result(result_data->result, vote);
+ return;
+}
+
+static void report_slot_reset(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+ result_data = (struct aer_broadcast_data *) data;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->slot_reset)
+ return;
+
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->slot_reset(dev);
+ result_data->result = merge_result(result_data->result, vote);
+ return;
+}
+
+static void report_resume(struct pci_dev *dev, void *data)
+{
+ struct pci_error_handlers *err_handler;
+
+ dev->error_state = pci_channel_io_normal;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->slot_reset)
+ return;
+
+ err_handler = dev->driver->err_handler;
+ err_handler->resume(dev);
+ return;
+}
+
+/**
+ * broadcast_error_message - handle message broadcast to downstream drivers
+ * @device: pointer to from where in a hierarchy message is broadcasted down
+ * @api: callback to be broadcasted
+ * @state: error state
+ *
+ * Invoked during error recovery process. Once being invoked, the content
+ * of error severity will be broadcasted to all downstream drivers in a
+ * hierarchy in question.
+ **/
+static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
+ enum pci_channel_state state,
+ char *error_mesg,
+ void (*cb)(struct pci_dev *, void *))
+{
+ struct aer_broadcast_data result_data;
+
+ printk(KERN_DEBUG "Broadcast %s message\n", error_mesg);
+ result_data.state = state;
+ if (cb == report_error_detected)
+ result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
+ else
+ result_data.result = PCI_ERS_RESULT_RECOVERED;
+
+ if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * If the error is reported by a bridge, we think this error
+ * is related to the downstream link of the bridge, so we
+ * do error recovery on all subordinates of the bridge instead
+ * of the bridge and clear the error status of the bridge.
+ */
+ if (cb == report_error_detected)
+ dev->error_state = state;
+ pci_walk_bus(dev->subordinate, cb, &result_data);
+ if (cb == report_resume) {
+ pci_cleanup_aer_uncorrect_error_status(dev);
+ dev->error_state = pci_channel_io_normal;
+ }
+ }
+ else {
+ /*
+ * If the error is reported by an end point, we think this
+ * error is related to the upstream link of the end point.
+ */
+ pci_walk_bus(dev->bus, cb, &result_data);
+ }
+
+ return result_data.result;
+}
+
+struct find_aer_service_data {
+ struct pcie_port_service_driver *aer_driver;
+ int is_downstream;
+};
+
+static int find_aer_service_iter(struct device *device, void *data)
+{
+ struct device_driver *driver;
+ struct pcie_port_service_driver *service_driver;
+ struct pcie_device *pcie_dev;
+ struct find_aer_service_data *result;
+
+ result = (struct find_aer_service_data *) data;
+
+ if (device->bus == &pcie_port_bus_type) {
+ pcie_dev = to_pcie_device(device);
+ if (pcie_dev->id.port_type == PCIE_SW_DOWNSTREAM_PORT)
+ result->is_downstream = 1;
+
+ driver = device->driver;
+ if (driver) {
+ service_driver = to_service_driver(driver);
+ if (service_driver->id_table->service_type ==
+ PCIE_PORT_SERVICE_AER) {
+ result->aer_driver = service_driver;
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void find_aer_service(struct pci_dev *dev,
+ struct find_aer_service_data *data)
+{
+ int retval;
+ retval = device_for_each_child(&dev->dev, data, find_aer_service_iter);
+}
+
+static pci_ers_result_t reset_link(struct pcie_device *aerdev,
+ struct pci_dev *dev)
+{
+ struct pci_dev *udev;
+ pci_ers_result_t status;
+ struct find_aer_service_data data;
+
+ if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)
+ udev = dev;
+ else
+ udev= dev->bus->self;
+
+ data.is_downstream = 0;
+ data.aer_driver = NULL;
+ find_aer_service(udev, &data);
+
+ /*
+ * Use the aer driver of the error agent firstly.
+ * If it hasn't the aer driver, use the root port's
+ */
+ if (!data.aer_driver || !data.aer_driver->reset_link) {
+ if (data.is_downstream &&
+ aerdev->device.driver &&
+ to_service_driver(aerdev->device.driver)->reset_link) {
+ data.aer_driver =
+ to_service_driver(aerdev->device.driver);
+ } else {
+ printk(KERN_DEBUG "No link-reset support to Device ID"
+ "[%s]\n",
+ dev->dev.bus_id);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ }
+
+ status = data.aer_driver->reset_link(udev);
+ if (status != PCI_ERS_RESULT_RECOVERED) {
+ printk(KERN_DEBUG "Link reset at upstream Device ID"
+ "[%s] failed\n",
+ udev->dev.bus_id);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return status;
+}
+
+/**
+ * do_recovery - handle nonfatal/fatal error recovery process
+ * @aerdev: pointer to a pcie_device data structure of root port
+ * @dev: pointer to a pci_dev data structure of agent detecting an error
+ * @severity: error severity type
+ *
+ * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
+ * error detected message to all downstream drivers within a hierarchy in
+ * question and return the returned code.
+ **/
+static pci_ers_result_t do_recovery(struct pcie_device *aerdev,
+ struct pci_dev *dev,
+ int severity)
+{
+ pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
+ enum pci_channel_state state;
+
+ if (severity == AER_FATAL)
+ state = pci_channel_io_frozen;
+ else
+ state = pci_channel_io_normal;
+
+ status = broadcast_error_message(dev,
+ state,
+ "error_detected",
+ report_error_detected);
+
+ if (severity == AER_FATAL) {
+ result = reset_link(aerdev, dev);
+ if (result != PCI_ERS_RESULT_RECOVERED) {
+ /* TODO: Should panic here? */
+ return result;
+ }
+ }
+
+ if (status == PCI_ERS_RESULT_CAN_RECOVER)
+ status = broadcast_error_message(dev,
+ state,
+ "mmio_enabled",
+ report_mmio_enabled);
+
+ if (status == PCI_ERS_RESULT_NEED_RESET) {
+ /*
+ * TODO: Should call platform-specific
+ * functions to reset slot before calling
+ * drivers' slot_reset callbacks?
+ */
+ status = broadcast_error_message(dev,
+ state,
+ "slot_reset",
+ report_slot_reset);
+ }
+
+ if (status == PCI_ERS_RESULT_RECOVERED)
+ broadcast_error_message(dev,
+ state,
+ "resume",
+ report_resume);
+
+ return status;
+}
+
+/**
+ * handle_error_source - handle logging error into an event log
+ * @aerdev: pointer to pcie_device data structure of the root port
+ * @dev: pointer to pci_dev data structure of error source device
+ * @info: comprehensive error information
+ *
+ * Invoked when an error being detected by Root Port.
+ **/
+static void handle_error_source(struct pcie_device * aerdev,
+ struct pci_dev *dev,
+ struct aer_err_info info)
+{
+ pci_ers_result_t status = 0;
+ int pos;
+
+ if (info.severity == AER_CORRECTABLE) {
+ /*
+ * Correctable error does not need software intevention.
+ * No need to go through error recovery process.
+ */
+ pos = pci_find_aer_capability(dev);
+ if (pos)
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS,
+ info.status);
+ } else {
+ status = do_recovery(aerdev, dev, info.severity);
+ if (status == PCI_ERS_RESULT_RECOVERED) {
+ printk(KERN_DEBUG "AER driver successfully recovered\n");
+ } else {
+ /* TODO: Should kernel panic here? */
+ printk(KERN_DEBUG "AER driver didn't recover\n");
+ }
+ }
+}
+
+/**
+ * aer_enable_rootport - enable Root Port's interrupts when receiving messages
+ * @rpc: pointer to a Root Port data structure
+ *
+ * Invoked when PCIE bus loads AER service driver.
+ **/
+void aer_enable_rootport(struct aer_rpc *rpc)
+{
+ struct pci_dev *pdev = rpc->rpd->port;
+ int pos, aer_pos;
+ u16 reg16;
+ u32 reg32;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ /* Clear PCIE Capability's Device Status */
+ pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16);
+ pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16);
+
+ /* Disable system error generation in response to error messages */
+ pci_read_config_word(pdev, pos + PCI_EXP_RTCTL, ®16);
+ reg16 &= ~(SYSTEM_ERROR_INTR_ON_MESG_MASK);
+ pci_write_config_word(pdev, pos + PCI_EXP_RTCTL, reg16);
+
+ aer_pos = pci_find_aer_capability(pdev);
+ /* Clear error status */
+ pci_read_config_dword(pdev, aer_pos + PCI_ERR_ROOT_STATUS, ®32);
+ pci_write_config_dword(pdev, aer_pos + PCI_ERR_ROOT_STATUS, reg32);
+ pci_read_config_dword(pdev, aer_pos + PCI_ERR_COR_STATUS, ®32);
+ pci_write_config_dword(pdev, aer_pos + PCI_ERR_COR_STATUS, reg32);
+ pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, ®32);
+ pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
+
+ /* Enable Root Port device reporting error itself */
+ pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, ®16);
+ reg16 = reg16 |
+ PCI_EXP_DEVCTL_CERE |
+ PCI_EXP_DEVCTL_NFERE |
+ PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_URRE;
+ pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL,
+ reg16);
+
+ /* Enable Root Port's interrupt in response to error messages */
+ pci_write_config_dword(pdev,
+ aer_pos + PCI_ERR_ROOT_COMMAND,
+ ROOT_PORT_INTR_ON_MESG_MASK);
+}
+
+/**
+ * disable_root_aer - disable Root Port's interrupts when receiving messages
+ * @rpc: pointer to a Root Port data structure
+ *
+ * Invoked when PCIE bus unloads AER service driver.
+ **/
+static void disable_root_aer(struct aer_rpc *rpc)
+{
+ struct pci_dev *pdev = rpc->rpd->port;
+ u32 reg32;
+ int pos;
+
+ pos = pci_find_aer_capability(pdev);
+ /* Disable Root's interrupt in response to error messages */
+ pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);
+
+ /* Clear Root's error status reg */
+ pci_read_config_dword(pdev, pos + PCI_ERR_ROOT_STATUS, ®32);
+ pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_STATUS, reg32);
+}
+
+/**
+ * get_e_source - retrieve an error source
+ * @rpc: pointer to the root port which holds an error
+ *
+ * Invoked by DPC handler to consume an error.
+ **/
+static struct aer_err_source* get_e_source(struct aer_rpc *rpc)
+{
+ struct aer_err_source *e_source;
+ unsigned long flags;
+
+ /* Lock access to Root error producer/consumer index */
+ spin_lock_irqsave(&rpc->e_lock, flags);
+ if (rpc->prod_idx == rpc->cons_idx) {
+ spin_unlock_irqrestore(&rpc->e_lock, flags);
+ return NULL;
+ }
+ e_source = &rpc->e_sources[rpc->cons_idx];
+ rpc->cons_idx++;
+ if (rpc->cons_idx == AER_ERROR_SOURCES_MAX)
+ rpc->cons_idx = 0;
+ spin_unlock_irqrestore(&rpc->e_lock, flags);
+
+ return e_source;
+}
+
+static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
+{
+ int pos;
+
+ pos = pci_find_aer_capability(dev);
+
+ /* The device might not support AER */
+ if (!pos)
+ return AER_SUCCESS;
+
+ if (info->severity == AER_CORRECTABLE) {
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS,
+ &info->status);
+ if (!(info->status & ERR_CORRECTABLE_ERROR_MASK))
+ return AER_UNSUCCESS;
+ } else if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE ||
+ info->severity == AER_NONFATAL) {
+
+ /* Link is still healthy for IO reads */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+ &info->status);
+ if (!(info->status & ERR_UNCORRECTABLE_ERROR_MASK))
+ return AER_UNSUCCESS;
+
+ if (info->status & AER_LOG_TLP_MASKS) {
+ info->flags |= AER_TLP_HEADER_VALID_FLAG;
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_HEADER_LOG, &info->tlp.dw0);
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_HEADER_LOG + 4, &info->tlp.dw1);
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_HEADER_LOG + 8, &info->tlp.dw2);
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_HEADER_LOG + 12, &info->tlp.dw3);
+ }
+ }
+
+ return AER_SUCCESS;
+}
+
+/**
+ * aer_isr_one_error - consume an error detected by root port
+ * @p_device: pointer to error root port service device
+ * @e_src: pointer to an error source
+ **/
+static void aer_isr_one_error(struct pcie_device *p_device,
+ struct aer_err_source *e_src)
+{
+ struct device *s_device;
+ struct aer_err_info e_info = {0, 0, 0,};
+ int i;
+ u16 id;
+
+ /*
+ * There is a possibility that both correctable error and
+ * uncorrectable error being logged. Report correctable error first.
+ */
+ for (i = 1; i & ROOT_ERR_STATUS_MASKS ; i <<= 2) {
+ if (i > 4)
+ break;
+ if (!(e_src->status & i))
+ continue;
+
+ /* Init comprehensive error information */
+ if (i & PCI_ERR_ROOT_COR_RCV) {
+ id = ERR_COR_ID(e_src->id);
+ e_info.severity = AER_CORRECTABLE;
+ } else {
+ id = ERR_UNCOR_ID(e_src->id);
+ e_info.severity = ((e_src->status >> 6) & 1);
+ }
+ if (e_src->status &
+ (PCI_ERR_ROOT_MULTI_COR_RCV |
+ PCI_ERR_ROOT_MULTI_UNCOR_RCV))
+ e_info.flags |= AER_MULTI_ERROR_VALID_FLAG;
+ if (!(s_device = find_source_device(p_device->port, id))) {
+ printk(KERN_DEBUG "%s->can't find device of ID%04x\n",
+ __FUNCTION__, id);
+ continue;
+ }
+ if (get_device_error_info(to_pci_dev(s_device), &e_info) ==
+ AER_SUCCESS) {
+ aer_print_error(to_pci_dev(s_device), &e_info);
+ handle_error_source(p_device,
+ to_pci_dev(s_device),
+ e_info);
+ }
+ }
+}
+
+/**
+ * aer_isr - consume errors detected by root port
+ * @context: pointer to a private data of pcie device
+ *
+ * Invoked, as DPC, when root port records new detected error
+ **/
+void aer_isr(void *context)
+{
+ struct pcie_device *p_device = (struct pcie_device *) context;
+ struct aer_rpc *rpc = get_service_data(p_device);
+ struct aer_err_source *e_src;
+
+ mutex_lock(&rpc->rpc_mutex);
+ e_src = get_e_source(rpc);
+ while (e_src) {
+ aer_isr_one_error(p_device, e_src);
+ e_src = get_e_source(rpc);
+ }
+ mutex_unlock(&rpc->rpc_mutex);
+
+ wake_up(&rpc->wait_release);
+}
+
+/**
+ * aer_delete_rootport - disable root port aer and delete service data
+ * @rpc: pointer to a root port device being deleted
+ *
+ * Invoked when AER service unloaded on a specific Root Port
+ **/
+void aer_delete_rootport(struct aer_rpc *rpc)
+{
+ /* Disable root port AER itself */
+ disable_root_aer(rpc);
+
+ kfree(rpc);
+}
+
+/**
+ * aer_init - provide AER initialization
+ * @dev: pointer to AER pcie device
+ *
+ * Invoked when AER service driver is loaded.
+ **/
+int aer_init(struct pcie_device *dev)
+{
+ int status;
+
+ /* Run _OSC Method */
+ status = aer_osc_setup(dev->port);
+
+ if(status != OSC_METHOD_RUN_SUCCESS) {
+ printk(KERN_DEBUG "%s: AER service init fails - %s\n",
+ __FUNCTION__,
+ (status == OSC_METHOD_NOT_SUPPORTED) ?
+ "No ACPI _OSC support" : "Run ACPI _OSC fails");
+
+ if (!forceload)
+ return status;
+ }
+
+ return AER_SUCCESS;
+}
+
+EXPORT_SYMBOL_GPL(pci_find_aer_capability);
+EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);
+EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
+EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
+
diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c
new file mode 100644
index 0000000..3933d4f3
--- /dev/null
+++ b/drivers/pci/pcie/aer/aerdrv_errprint.c
@@ -0,0 +1,248 @@
+/*
+ * drivers/pci/pcie/aer/aerdrv_errprint.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Format error messages and print them to console.
+ *
+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/suspend.h>
+
+#include "aerdrv.h"
+
+#define AER_AGENT_RECEIVER 0
+#define AER_AGENT_REQUESTER 1
+#define AER_AGENT_COMPLETER 2
+#define AER_AGENT_TRANSMITTER 3
+
+#define AER_AGENT_REQUESTER_MASK (PCI_ERR_UNC_COMP_TIME| \
+ PCI_ERR_UNC_UNSUP)
+
+#define AER_AGENT_COMPLETER_MASK PCI_ERR_UNC_COMP_ABORT
+
+#define AER_AGENT_TRANSMITTER_MASK(t, e) (e & (PCI_ERR_COR_REP_ROLL| \
+ ((t == AER_CORRECTABLE) ? PCI_ERR_COR_REP_TIMER: 0)))
+
+#define AER_GET_AGENT(t, e) \
+ ((e & AER_AGENT_COMPLETER_MASK) ? AER_AGENT_COMPLETER : \
+ (e & AER_AGENT_REQUESTER_MASK) ? AER_AGENT_REQUESTER : \
+ (AER_AGENT_TRANSMITTER_MASK(t, e)) ? AER_AGENT_TRANSMITTER : \
+ AER_AGENT_RECEIVER)
+
+#define AER_PHYSICAL_LAYER_ERROR_MASK PCI_ERR_COR_RCVR
+#define AER_DATA_LINK_LAYER_ERROR_MASK(t, e) \
+ (PCI_ERR_UNC_DLP| \
+ PCI_ERR_COR_BAD_TLP| \
+ PCI_ERR_COR_BAD_DLLP| \
+ PCI_ERR_COR_REP_ROLL| \
+ ((t == AER_CORRECTABLE) ? \
+ PCI_ERR_COR_REP_TIMER: 0))
+
+#define AER_PHYSICAL_LAYER_ERROR 0
+#define AER_DATA_LINK_LAYER_ERROR 1
+#define AER_TRANSACTION_LAYER_ERROR 2
+
+#define AER_GET_LAYER_ERROR(t, e) \
+ ((e & AER_PHYSICAL_LAYER_ERROR_MASK) ? \
+ AER_PHYSICAL_LAYER_ERROR : \
+ (e & AER_DATA_LINK_LAYER_ERROR_MASK(t, e)) ? \
+ AER_DATA_LINK_LAYER_ERROR : \
+ AER_TRANSACTION_LAYER_ERROR)
+
+/*
+ * AER error strings
+ */
+static char* aer_error_severity_string[] = {
+ "Uncorrected (Non-Fatal)",
+ "Uncorrected (Fatal)",
+ "Corrected"
+};
+
+static char* aer_error_layer[] = {
+ "Physical Layer",
+ "Data Link Layer",
+ "Transaction Layer"
+};
+static char* aer_correctable_error_string[] = {
+ "Receiver Error ", /* Bit Position 0 */
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "Bad TLP ", /* Bit Position 6 */
+ "Bad DLLP ", /* Bit Position 7 */
+ "RELAY_NUM Rollover ", /* Bit Position 8 */
+ NULL,
+ NULL,
+ NULL,
+ "Replay Timer Timeout ", /* Bit Position 12 */
+ "Advisory Non-Fatal ", /* Bit Position 13 */
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+};
+
+static char* aer_uncorrectable_error_string[] = {
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "Data Link Protocol ", /* Bit Position 4 */
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "Poisoned TLP ", /* Bit Position 12 */
+ "Flow Control Protocol ", /* Bit Position 13 */
+ "Completion Timeout ", /* Bit Position 14 */
+ "Completer Abort ", /* Bit Position 15 */
+ "Unexpected Completion ", /* Bit Position 16 */
+ "Receiver Overflow ", /* Bit Position 17 */
+ "Malformed TLP ", /* Bit Position 18 */
+ "ECRC ", /* Bit Position 19 */
+ "Unsupported Request ", /* Bit Position 20 */
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+};
+
+static char* aer_agent_string[] = {
+ "Receiver ID",
+ "Requester ID",
+ "Completer ID",
+ "Transmitter ID"
+};
+
+static char * aer_get_error_source_name(int severity,
+ unsigned int status,
+ char errmsg_buff[])
+{
+ int i;
+ char * errmsg = NULL;
+
+ for (i = 0; i < 32; i++) {
+ if (!(status & (1 << i)))
+ continue;
+
+ if (severity == AER_CORRECTABLE)
+ errmsg = aer_correctable_error_string[i];
+ else
+ errmsg = aer_uncorrectable_error_string[i];
+
+ if (!errmsg) {
+ sprintf(errmsg_buff, "Unknown Error Bit %2d ", i);
+ errmsg = errmsg_buff;
+ }
+
+ break;
+ }
+
+ return errmsg;
+}
+
+static DEFINE_SPINLOCK(logbuf_lock);
+static char errmsg_buff[100];
+void aer_print_error(struct pci_dev *dev, struct aer_err_info *info)
+{
+ char * errmsg;
+ int err_layer, agent;
+ char * loglevel;
+
+ if (info->severity == AER_CORRECTABLE)
+ loglevel = KERN_WARNING;
+ else
+ loglevel = KERN_ERR;
+
+ printk("%s+------ PCI-Express Device Error ------+\n", loglevel);
+ printk("%sError Severity\t\t: %s\n", loglevel,
+ aer_error_severity_string[info->severity]);
+
+ if ( info->status == 0) {
+ printk("%sPCIE Bus Error type\t: (Unaccessible)\n", loglevel);
+ printk("%sUnaccessible Received\t: %s\n", loglevel,
+ info->flags & AER_MULTI_ERROR_VALID_FLAG ?
+ "Multiple" : "First");
+ printk("%sUnregistered Agent ID\t: %04x\n", loglevel,
+ (dev->bus->number << 8) | dev->devfn);
+ } else {
+ err_layer = AER_GET_LAYER_ERROR(info->severity, info->status);
+ printk("%sPCIE Bus Error type\t: %s\n", loglevel,
+ aer_error_layer[err_layer]);
+
+ spin_lock(&logbuf_lock);
+ errmsg = aer_get_error_source_name(info->severity,
+ info->status,
+ errmsg_buff);
+ printk("%s%s\t: %s\n", loglevel, errmsg,
+ info->flags & AER_MULTI_ERROR_VALID_FLAG ?
+ "Multiple" : "First");
+ spin_unlock(&logbuf_lock);
+
+ agent = AER_GET_AGENT(info->severity, info->status);
+ printk("%s%s\t\t: %04x\n", loglevel,
+ aer_agent_string[agent],
+ (dev->bus->number << 8) | dev->devfn);
+
+ printk("%sVendorID=%04xh, DeviceID=%04xh,"
+ " Bus=%02xh, Device=%02xh, Function=%02xh\n",
+ loglevel,
+ dev->vendor,
+ dev->device,
+ dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ PCI_FUNC(dev->devfn));
+
+ if (info->flags & AER_TLP_HEADER_VALID_FLAG) {
+ unsigned char *tlp = (unsigned char *) &info->tlp;
+ printk("%sTLB Header:\n", loglevel);
+ printk("%s%02x%02x%02x%02x %02x%02x%02x%02x"
+ " %02x%02x%02x%02x %02x%02x%02x%02x\n",
+ loglevel,
+ *(tlp + 3), *(tlp + 2), *(tlp + 1), *tlp,
+ *(tlp + 7), *(tlp + 6), *(tlp + 5), *(tlp + 4),
+ *(tlp + 11), *(tlp + 10), *(tlp + 9),
+ *(tlp + 8), *(tlp + 15), *(tlp + 14),
+ *(tlp + 13), *(tlp + 12));
+ }
+ }
+}
+
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 1d317d2..67fcd17 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -39,7 +39,7 @@
extern int pcie_port_device_resume(struct pci_dev *dev);
#endif
extern void pcie_port_device_remove(struct pci_dev *dev);
-extern void pcie_port_bus_register(void);
+extern int pcie_port_bus_register(void);
extern void pcie_port_bus_unregister(void);
#endif /* _PORTDRV_H_ */
diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c
index 3e84b50..3f09768 100644
--- a/drivers/pci/pcie/portdrv_bus.c
+++ b/drivers/pci/pcie/portdrv_bus.c
@@ -24,6 +24,7 @@
.suspend = pcie_port_bus_suspend,
.resume = pcie_port_bus_resume,
};
+EXPORT_SYMBOL_GPL(pcie_port_bus_type);
static int pcie_port_bus_match(struct device *dev, struct device_driver *drv)
{
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 55c6622..bd6615b 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -6,6 +6,7 @@
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
*/
+#include <linux/compiler.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -339,8 +340,7 @@
int pcie_port_device_suspend(struct pci_dev *dev, pm_message_t state)
{
- device_for_each_child(&dev->dev, &state, suspend_iter);
- return 0;
+ return device_for_each_child(&dev->dev, &state, suspend_iter);
}
static int resume_iter(struct device *dev, void *data)
@@ -358,8 +358,7 @@
int pcie_port_device_resume(struct pci_dev *dev)
{
- device_for_each_child(&dev->dev, NULL, resume_iter);
- return 0;
+ return device_for_each_child(&dev->dev, NULL, resume_iter);
}
#endif
@@ -402,9 +401,9 @@
pci_disable_msi(dev);
}
-void pcie_port_bus_register(void)
+int __must_check pcie_port_bus_register(void)
{
- bus_register(&pcie_port_bus_type);
+ return bus_register(&pcie_port_bus_type);
}
void pcie_port_bus_unregister(void)
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 478d0d2..037690e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -14,8 +14,10 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pcieport_if.h>
+#include <linux/aer.h>
#include "portdrv.h"
+#include "aer/aerdrv.h"
/*
* Version Information
@@ -30,6 +32,43 @@
/* global data */
static const char device_name[] = "pcieport-driver";
+static int pcie_portdrv_save_config(struct pci_dev *dev)
+{
+ return pci_save_state(dev);
+}
+
+#ifdef CONFIG_PM
+static int pcie_portdrv_restore_config(struct pci_dev *dev)
+{
+ int retval;
+
+ pci_restore_state(dev);
+ retval = pci_enable_device(dev);
+ if (retval)
+ return retval;
+ pci_set_master(dev);
+ return 0;
+}
+
+static int pcie_portdrv_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ int ret = pcie_port_device_suspend(dev, state);
+
+ if (!ret)
+ ret = pcie_portdrv_save_config(dev);
+ return ret;
+}
+
+static int pcie_portdrv_resume(struct pci_dev *dev)
+{
+ pcie_portdrv_restore_config(dev);
+ return pcie_port_device_resume(dev);
+}
+#else
+#define pcie_portdrv_suspend NULL
+#define pcie_portdrv_resume NULL
+#endif
+
/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
@@ -61,6 +100,10 @@
return -ENOMEM;
}
+ pcie_portdrv_save_config(dev);
+
+ pci_enable_pcie_error_reporting(dev);
+
return 0;
}
@@ -70,39 +113,151 @@
kfree(pci_get_drvdata(dev));
}
-#ifdef CONFIG_PM
-static int pcie_portdrv_save_config(struct pci_dev *dev)
+static int error_detected_iter(struct device *device, void *data)
{
- return pci_save_state(dev);
-}
+ struct pcie_device *pcie_device;
+ struct pcie_port_service_driver *driver;
+ struct aer_broadcast_data *result_data;
+ pci_ers_result_t status;
-static int pcie_portdrv_restore_config(struct pci_dev *dev)
-{
- int retval;
+ result_data = (struct aer_broadcast_data *) data;
- pci_restore_state(dev);
- retval = pci_enable_device(dev);
- if (retval)
- return retval;
- pci_set_master(dev);
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ driver = to_service_driver(device->driver);
+ if (!driver ||
+ !driver->err_handler ||
+ !driver->err_handler->error_detected)
+ return 0;
+
+ pcie_device = to_pcie_device(device);
+
+ /* Forward error detected message to service drivers */
+ status = driver->err_handler->error_detected(
+ pcie_device->port,
+ result_data->state);
+ result_data->result =
+ merge_result(result_data->result, status);
+ }
+
return 0;
}
-static int pcie_portdrv_suspend (struct pci_dev *dev, pm_message_t state)
+static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
+ enum pci_channel_state error)
{
- int ret = pcie_port_device_suspend(dev, state);
+ struct aer_broadcast_data result_data =
+ {error, PCI_ERS_RESULT_CAN_RECOVER};
+ int retval;
- if (!ret)
- ret = pcie_portdrv_save_config(dev);
- return ret;
+ /* can not fail */
+ retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter);
+
+ return result_data.result;
}
-static int pcie_portdrv_resume (struct pci_dev *dev)
+static int mmio_enabled_iter(struct device *device, void *data)
{
- pcie_portdrv_restore_config(dev);
- return pcie_port_device_resume(dev);
+ struct pcie_device *pcie_device;
+ struct pcie_port_service_driver *driver;
+ pci_ers_result_t status, *result;
+
+ result = (pci_ers_result_t *) data;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ driver = to_service_driver(device->driver);
+ if (driver &&
+ driver->err_handler &&
+ driver->err_handler->mmio_enabled) {
+ pcie_device = to_pcie_device(device);
+
+ /* Forward error message to service drivers */
+ status = driver->err_handler->mmio_enabled(
+ pcie_device->port);
+ *result = merge_result(*result, status);
+ }
+ }
+
+ return 0;
}
-#endif
+
+static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev)
+{
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+ int retval;
+
+ /* get true return value from &status */
+ retval = device_for_each_child(&dev->dev, &status, mmio_enabled_iter);
+ return status;
+}
+
+static int slot_reset_iter(struct device *device, void *data)
+{
+ struct pcie_device *pcie_device;
+ struct pcie_port_service_driver *driver;
+ pci_ers_result_t status, *result;
+
+ result = (pci_ers_result_t *) data;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ driver = to_service_driver(device->driver);
+ if (driver &&
+ driver->err_handler &&
+ driver->err_handler->slot_reset) {
+ pcie_device = to_pcie_device(device);
+
+ /* Forward error message to service drivers */
+ status = driver->err_handler->slot_reset(
+ pcie_device->port);
+ *result = merge_result(*result, status);
+ }
+ }
+
+ return 0;
+}
+
+static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
+{
+ pci_ers_result_t status;
+ int retval;
+
+ /* If fatal, restore cfg space for possible link reset at upstream */
+ if (dev->error_state == pci_channel_io_frozen) {
+ pcie_portdrv_restore_config(dev);
+ pci_enable_pcie_error_reporting(dev);
+ }
+
+ /* get true return value from &status */
+ retval = device_for_each_child(&dev->dev, &status, slot_reset_iter);
+
+ return status;
+}
+
+static int resume_iter(struct device *device, void *data)
+{
+ struct pcie_device *pcie_device;
+ struct pcie_port_service_driver *driver;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ driver = to_service_driver(device->driver);
+ if (driver &&
+ driver->err_handler &&
+ driver->err_handler->resume) {
+ pcie_device = to_pcie_device(device);
+
+ /* Forward error message to service drivers */
+ driver->err_handler->resume(pcie_device->port);
+ }
+ }
+
+ return 0;
+}
+
+static void pcie_portdrv_err_resume(struct pci_dev *dev)
+{
+ int retval;
+ /* nothing to do with error value, if it ever happens */
+ retval = device_for_each_child(&dev->dev, NULL, resume_iter);
+}
/*
* LINUX Device Driver Model
@@ -114,6 +269,13 @@
};
MODULE_DEVICE_TABLE(pci, port_pci_ids);
+static struct pci_error_handlers pcie_portdrv_err_handler = {
+ .error_detected = pcie_portdrv_error_detected,
+ .mmio_enabled = pcie_portdrv_mmio_enabled,
+ .slot_reset = pcie_portdrv_slot_reset,
+ .resume = pcie_portdrv_err_resume,
+};
+
static struct pci_driver pcie_portdrv = {
.name = (char *)device_name,
.id_table = &port_pci_ids[0],
@@ -121,20 +283,25 @@
.probe = pcie_portdrv_probe,
.remove = pcie_portdrv_remove,
-#ifdef CONFIG_PM
.suspend = pcie_portdrv_suspend,
.resume = pcie_portdrv_resume,
-#endif /* PM */
+
+ .err_handler = &pcie_portdrv_err_handler,
};
static int __init pcie_portdrv_init(void)
{
- int retval = 0;
+ int retval;
- pcie_port_bus_register();
+ retval = pcie_port_bus_register();
+ if (retval) {
+ printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval);
+ goto out;
+ }
retval = pci_register_driver(&pcie_portdrv);
if (retval)
pcie_port_bus_unregister();
+ out:
return retval;
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index c5a58d1..a3b0a5e 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -339,6 +339,7 @@
{
struct pci_bus *child;
int i;
+ int retval;
/*
* Allocate a new bus, and inherit stuff from the parent..
@@ -356,8 +357,13 @@
child->class_dev.class = &pcibus_class;
sprintf(child->class_dev.class_id, "%04x:%02x", pci_domain_nr(child), busnr);
- class_device_register(&child->class_dev);
- class_device_create_file(&child->class_dev, &class_device_attr_cpuaffinity);
+ retval = class_device_register(&child->class_dev);
+ if (retval)
+ goto error_register;
+ retval = class_device_create_file(&child->class_dev,
+ &class_device_attr_cpuaffinity);
+ if (retval)
+ goto error_file_create;
/*
* Set up the primary, secondary and subordinate
@@ -375,6 +381,12 @@
bridge->subordinate = child;
return child;
+
+error_file_create:
+ class_device_unregister(&child->class_dev);
+error_register:
+ kfree(child);
+ return NULL;
}
struct pci_bus * __devinit pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index def78a2..08cd86a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -577,8 +577,6 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw );
-int pci_msi_quirk;
-
#define AMD8131_revA0 0x01
#define AMD8131_revB0 0x11
#define AMD8131_MISC 0x40
@@ -587,12 +585,6 @@
{
unsigned char revid, tmp;
- if (dev->subordinate) {
- printk(KERN_WARNING "PCI: MSI quirk detected. "
- "PCI_BUS_FLAGS_NO_MSI set for subordinate bus.\n");
- dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
- }
-
if (nr_ioapics == 0)
return;
@@ -605,13 +597,6 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
-
-static void __init quirk_svw_msi(struct pci_dev *dev)
-{
- pci_msi_quirk = 1;
- printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi );
#endif /* CONFIG_X86_IO_APIC */
@@ -1690,6 +1675,95 @@
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap);
+#ifdef CONFIG_PCI_MSI
+/* To disable MSI globally */
+int pci_msi_quirk;
+
+/* The Serverworks PCI-X chipset does not support MSI. We cannot easily rely
+ * on setting PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
+ * some other busses controlled by the chipset even if Linux is not aware of it.
+ * Instead of setting the flag on all busses in the machine, simply disable MSI
+ * globally.
+ */
+static void __init quirk_svw_msi(struct pci_dev *dev)
+{
+ pci_msi_quirk = 1;
+ printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi);
+
+/* Disable MSI on chipsets that are known to not support it */
+static void __devinit quirk_disable_msi(struct pci_dev *dev)
+{
+ if (dev->subordinate) {
+ printk(KERN_WARNING "PCI: MSI quirk detected. "
+ "PCI_BUS_FLAGS_NO_MSI set for %s subordinate bus.\n",
+ pci_name(dev));
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
+
+/* Go through the list of Hypertransport capabilities and
+ * return 1 if a HT MSI capability is found and enabled */
+static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
+{
+ u8 pos;
+ int ttl;
+ for (pos = pci_find_capability(dev, PCI_CAP_ID_HT), ttl = 48;
+ pos && ttl;
+ pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT), ttl--) {
+ u32 cap_hdr;
+ /* MSI mapping section according to Hypertransport spec */
+ if (pci_read_config_dword(dev, pos, &cap_hdr) == 0
+ && (cap_hdr & 0xf8000000) == 0xa8000000 /* MSI mapping */) {
+ printk(KERN_INFO "PCI: Found HT MSI mapping on %s with capability %s\n",
+ pci_name(dev), cap_hdr & 0x10000 ? "enabled" : "disabled");
+ return (cap_hdr & 0x10000) != 0; /* MSI mapping cap enabled */
+ }
+ }
+ return 0;
+}
+
+/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */
+static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)
+{
+ if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
+ printk(KERN_WARNING "PCI: MSI quirk detected. "
+ "MSI disabled on chipset %s.\n",
+ pci_name(dev));
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
+ quirk_msi_ht_cap);
+
+/* The nVidia CK804 chipset may have 2 HT MSI mappings.
+ * MSI are supported if the MSI capability set in any of these mappings.
+ */
+static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+
+ if (!dev->subordinate)
+ return;
+
+ /* check HT MSI cap on this chipset and the root one.
+ * a single one having MSI is enough to be sure that MSI are supported.
+ */
+ pdev = pci_find_slot(dev->bus->number, 0);
+ if (dev->subordinate && !msi_ht_cap_enabled(dev)
+ && !msi_ht_cap_enabled(pdev)) {
+ printk(KERN_WARNING "PCI: MSI quirk detected. "
+ "MSI disabled on chipset %s.\n",
+ pci_name(dev));
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_msi_ht_cap);
+#endif /* CONFIG_PCI_MSI */
+
EXPORT_SYMBOL(pcie_mch_quirk);
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pci_fixup_device);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 99ffbd4..430281b 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -16,8 +16,11 @@
}
}
-static void pci_destroy_dev(struct pci_dev *dev)
+static void pci_stop_dev(struct pci_dev *dev)
{
+ if (!dev->global_list.next)
+ return;
+
if (!list_empty(&dev->global_list)) {
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
@@ -27,6 +30,11 @@
dev->global_list.next = dev->global_list.prev = NULL;
up_write(&pci_bus_sem);
}
+}
+
+static void pci_destroy_dev(struct pci_dev *dev)
+{
+ pci_stop_dev(dev);
/* Remove the device from the device lists, and prevent any further
* list accesses from this device */
@@ -119,5 +127,32 @@
}
}
+static void pci_stop_bus_devices(struct pci_bus *bus)
+{
+ struct list_head *l, *n;
+
+ list_for_each_safe(l, n, &bus->devices) {
+ struct pci_dev *dev = pci_dev_b(l);
+ pci_stop_bus_device(dev);
+ }
+}
+
+/**
+ * pci_stop_bus_device - stop a PCI device and any children
+ * @dev: the device to stop
+ *
+ * Stop a PCI device (detach the driver, remove from the global list
+ * and so on). This also stop any subordinate buses and children in a
+ * depth-first manner.
+ */
+void pci_stop_bus_device(struct pci_dev *dev)
+{
+ if (dev->subordinate)
+ pci_stop_bus_devices(dev->subordinate);
+
+ pci_stop_dev(dev);
+}
+
EXPORT_SYMBOL(pci_remove_bus_device);
EXPORT_SYMBOL(pci_remove_behind_bridge);
+EXPORT_SYMBOL_GPL(pci_stop_bus_device);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 47c1071..5440491 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -55,12 +55,19 @@
list_for_each_entry(dev, &bus->devices, bus_list) {
u16 class = dev->class >> 8;
- /* Don't touch classless devices or host bridges or ioapics. */
+ /* Don't touch classless devices or host bridges. */
if (class == PCI_CLASS_NOT_DEFINED ||
- class == PCI_CLASS_BRIDGE_HOST ||
- class == PCI_CLASS_SYSTEM_PIC)
+ class == PCI_CLASS_BRIDGE_HOST)
continue;
+ /* Don't touch ioapics if it has the assigned resources. */
+ if (class == PCI_CLASS_SYSTEM_PIC) {
+ res = &dev->resource[0];
+ if (res[0].start || res[1].start || res[2].start ||
+ res[3].start || res[4].start || res[5].start)
+ continue;
+ }
+
pdev_sort_resources(dev, &head);
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 7ff1d88..33a7b72 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -238,6 +238,16 @@
To compile this driver as a module, choose M here: the
module will be called rtc-sa1100.
+config RTC_DRV_SH
+ tristate "SuperH On-Chip RTC"
+ depends on RTC_CLASS && SUPERH
+ help
+ Say Y here to enable support for the on-chip RTC found in
+ most SuperH processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-sh.
+
config RTC_DRV_VR41XX
tristate "NEC VR41XX"
depends on RTC_CLASS && CPU_VR41XX
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index bbcfb09..e72d467 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -31,3 +31,4 @@
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_AT91) += rtc-at91.o
+obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
new file mode 100644
index 0000000..d2ce0c8
--- /dev/null
+++ b/drivers/rtc/rtc-sh.c
@@ -0,0 +1,467 @@
+/*
+ * SuperH On-Chip RTC Support
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * Based on the old arch/sh/kernel/cpu/rtc.c by:
+ *
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_CPU_SH3
+#define rtc_reg_size sizeof(u16)
+#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */
+#elif defined(CONFIG_CPU_SH4)
+#define rtc_reg_size sizeof(u32)
+#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */
+#endif
+
+#define RTC_REG(r) ((r) * rtc_reg_size)
+
+#define R64CNT RTC_REG(0)
+#define RSECCNT RTC_REG(1)
+#define RMINCNT RTC_REG(2)
+#define RHRCNT RTC_REG(3)
+#define RWKCNT RTC_REG(4)
+#define RDAYCNT RTC_REG(5)
+#define RMONCNT RTC_REG(6)
+#define RYRCNT RTC_REG(7)
+#define RSECAR RTC_REG(8)
+#define RMINAR RTC_REG(9)
+#define RHRAR RTC_REG(10)
+#define RWKAR RTC_REG(11)
+#define RDAYAR RTC_REG(12)
+#define RMONAR RTC_REG(13)
+#define RCR1 RTC_REG(14)
+#define RCR2 RTC_REG(15)
+
+/* RCR1 Bits */
+#define RCR1_CF 0x80 /* Carry Flag */
+#define RCR1_CIE 0x10 /* Carry Interrupt Enable */
+#define RCR1_AIE 0x08 /* Alarm Interrupt Enable */
+#define RCR1_AF 0x01 /* Alarm Flag */
+
+/* RCR2 Bits */
+#define RCR2_PEF 0x80 /* PEriodic interrupt Flag */
+#define RCR2_PESMASK 0x70 /* Periodic interrupt Set */
+#define RCR2_RTCEN 0x08 /* ENable RTC */
+#define RCR2_ADJ 0x04 /* ADJustment (30-second) */
+#define RCR2_RESET 0x02 /* Reset bit */
+#define RCR2_START 0x01 /* Start bit */
+
+struct sh_rtc {
+ void __iomem *regbase;
+ unsigned long regsize;
+ struct resource *res;
+ unsigned int alarm_irq, periodic_irq, carry_irq;
+ struct rtc_device *rtc_dev;
+ spinlock_t lock;
+};
+
+static irqreturn_t sh_rtc_interrupt(int irq, void *id, struct pt_regs *regs)
+{
+ struct platform_device *pdev = id;
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
+ unsigned int tmp, events = 0;
+
+ spin_lock(&rtc->lock);
+
+ tmp = readb(rtc->regbase + RCR1);
+
+ if (tmp & RCR1_AF)
+ events |= RTC_AF | RTC_IRQF;
+
+ tmp &= ~(RCR1_CF | RCR1_AF);
+
+ writeb(tmp, rtc->regbase + RCR1);
+
+ rtc_update_irq(&rtc->rtc_dev->class_dev, 1, events);
+
+ spin_unlock(&rtc->lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sh_rtc_periodic(int irq, void *id, struct pt_regs *regs)
+{
+ struct sh_rtc *rtc = dev_get_drvdata(id);
+
+ spin_lock(&rtc->lock);
+
+ rtc_update_irq(&rtc->rtc_dev->class_dev, 1, RTC_PF | RTC_IRQF);
+
+ spin_unlock(&rtc->lock);
+
+ return IRQ_HANDLED;
+}
+
+static inline void sh_rtc_setpie(struct device *dev, unsigned int enable)
+{
+ struct sh_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int tmp;
+
+ spin_lock_irq(&rtc->lock);
+
+ tmp = readb(rtc->regbase + RCR2);
+
+ if (enable) {
+ tmp &= ~RCR2_PESMASK;
+ tmp |= RCR2_PEF | (2 << 4);
+ } else
+ tmp &= ~(RCR2_PESMASK | RCR2_PEF);
+
+ writeb(tmp, rtc->regbase + RCR2);
+
+ spin_unlock_irq(&rtc->lock);
+}
+
+static inline void sh_rtc_setaie(struct device *dev, unsigned int enable)
+{
+ struct sh_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int tmp;
+
+ spin_lock_irq(&rtc->lock);
+
+ tmp = readb(rtc->regbase + RCR1);
+
+ if (enable)
+ tmp |= RCR1_AIE;
+ else
+ tmp &= ~RCR1_AIE;
+
+ writeb(tmp, rtc->regbase + RCR1);
+
+ spin_unlock_irq(&rtc->lock);
+}
+
+static int sh_rtc_open(struct device *dev)
+{
+ struct sh_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int tmp;
+ int ret;
+
+ tmp = readb(rtc->regbase + RCR1);
+ tmp &= ~RCR1_CF;
+ tmp |= RCR1_CIE;
+ writeb(tmp, rtc->regbase + RCR1);
+
+ ret = request_irq(rtc->periodic_irq, sh_rtc_periodic, SA_INTERRUPT,
+ "sh-rtc period", dev);
+ if (unlikely(ret)) {
+ dev_err(dev, "request period IRQ failed with %d, IRQ %d\n",
+ ret, rtc->periodic_irq);
+ return ret;
+ }
+
+ ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, SA_INTERRUPT,
+ "sh-rtc carry", dev);
+ if (unlikely(ret)) {
+ dev_err(dev, "request carry IRQ failed with %d, IRQ %d\n",
+ ret, rtc->carry_irq);
+ free_irq(rtc->periodic_irq, dev);
+ goto err_bad_carry;
+ }
+
+ ret = request_irq(rtc->alarm_irq, sh_rtc_interrupt, SA_INTERRUPT,
+ "sh-rtc alarm", dev);
+ if (unlikely(ret)) {
+ dev_err(dev, "request alarm IRQ failed with %d, IRQ %d\n",
+ ret, rtc->alarm_irq);
+ goto err_bad_alarm;
+ }
+
+ return 0;
+
+err_bad_alarm:
+ free_irq(rtc->carry_irq, dev);
+err_bad_carry:
+ free_irq(rtc->periodic_irq, dev);
+
+ return ret;
+}
+
+static void sh_rtc_release(struct device *dev)
+{
+ struct sh_rtc *rtc = dev_get_drvdata(dev);
+
+ sh_rtc_setpie(dev, 0);
+
+ free_irq(rtc->periodic_irq, dev);
+ free_irq(rtc->carry_irq, dev);
+ free_irq(rtc->alarm_irq, dev);
+}
+
+static int sh_rtc_proc(struct device *dev, struct seq_file *seq)
+{
+ struct sh_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int tmp;
+
+ tmp = readb(rtc->regbase + RCR1);
+ seq_printf(seq, "alarm_IRQ\t: %s\n",
+ (tmp & RCR1_AIE) ? "yes" : "no");
+ seq_printf(seq, "carry_IRQ\t: %s\n",
+ (tmp & RCR1_CIE) ? "yes" : "no");
+
+ tmp = readb(rtc->regbase + RCR2);
+ seq_printf(seq, "periodic_IRQ\t: %s\n",
+ (tmp & RCR2_PEF) ? "yes" : "no");
+
+ return 0;
+}
+
+static int sh_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+ unsigned int ret = -ENOIOCTLCMD;
+
+ switch (cmd) {
+ case RTC_PIE_OFF:
+ case RTC_PIE_ON:
+ sh_rtc_setpie(dev, cmd == RTC_PIE_ON);
+ ret = 0;
+ break;
+ case RTC_AIE_OFF:
+ case RTC_AIE_ON:
+ sh_rtc_setaie(dev, cmd == RTC_AIE_ON);
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
+
+static int sh_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
+ unsigned int sec128, sec2, yr, yr100, cf_bit;
+
+ do {
+ unsigned int tmp;
+
+ spin_lock_irq(&rtc->lock);
+
+ tmp = readb(rtc->regbase + RCR1);
+ tmp &= ~RCR1_CF; /* Clear CF-bit */
+ tmp |= RCR1_CIE;
+ writeb(tmp, rtc->regbase + RCR1);
+
+ sec128 = readb(rtc->regbase + R64CNT);
+
+ tm->tm_sec = BCD2BIN(readb(rtc->regbase + RSECCNT));
+ tm->tm_min = BCD2BIN(readb(rtc->regbase + RMINCNT));
+ tm->tm_hour = BCD2BIN(readb(rtc->regbase + RHRCNT));
+ tm->tm_wday = BCD2BIN(readb(rtc->regbase + RWKCNT));
+ tm->tm_mday = BCD2BIN(readb(rtc->regbase + RDAYCNT));
+ tm->tm_mon = BCD2BIN(readb(rtc->regbase + RMONCNT));
+
+#if defined(CONFIG_CPU_SH4)
+ yr = readw(rtc->regbase + RYRCNT);
+ yr100 = BCD2BIN(yr >> 8);
+ yr &= 0xff;
+#else
+ yr = readb(rtc->regbase + RYRCNT);
+ yr100 = BCD2BIN((yr == 0x99) ? 0x19 : 0x20);
+#endif
+
+ tm->tm_year = (yr100 * 100 + BCD2BIN(yr)) - 1900;
+
+ sec2 = readb(rtc->regbase + R64CNT);
+ cf_bit = readb(rtc->regbase + RCR1) & RCR1_CF;
+
+ spin_unlock_irq(&rtc->lock);
+ } while (cf_bit != 0 || ((sec128 ^ sec2) & RTC_BIT_INVERTED) != 0);
+
+#if RTC_BIT_INVERTED != 0
+ if ((sec128 & RTC_BIT_INVERTED))
+ tm->tm_sec--;
+#endif
+
+ dev_dbg(&dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ if (rtc_valid_tm(tm) < 0)
+ dev_err(dev, "invalid date\n");
+
+ return 0;
+}
+
+static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
+ unsigned int tmp;
+ int year;
+
+ spin_lock_irq(&rtc->lock);
+
+ /* Reset pre-scaler & stop RTC */
+ tmp = readb(rtc->regbase + RCR2);
+ tmp |= RCR2_RESET;
+ writeb(tmp, rtc->regbase + RCR2);
+
+ writeb(BIN2BCD(tm->tm_sec), rtc->regbase + RSECCNT);
+ writeb(BIN2BCD(tm->tm_min), rtc->regbase + RMINCNT);
+ writeb(BIN2BCD(tm->tm_hour), rtc->regbase + RHRCNT);
+ writeb(BIN2BCD(tm->tm_wday), rtc->regbase + RWKCNT);
+ writeb(BIN2BCD(tm->tm_mday), rtc->regbase + RDAYCNT);
+ writeb(BIN2BCD(tm->tm_mon), rtc->regbase + RMONCNT);
+
+#ifdef CONFIG_CPU_SH3
+ year = tm->tm_year % 100;
+ writeb(BIN2BCD(year), rtc->regbase + RYRCNT);
+#else
+ year = (BIN2BCD((tm->tm_year + 1900) / 100) << 8) |
+ BIN2BCD(tm->tm_year % 100);
+ writew(year, rtc->regbase + RYRCNT);
+#endif
+
+ /* Start RTC */
+ tmp = readb(rtc->regbase + RCR2);
+ tmp &= ~RCR2_RESET;
+ tmp |= RCR2_RTCEN | RCR2_START;
+ writeb(tmp, rtc->regbase + RCR2);
+
+ spin_unlock_irq(&rtc->lock);
+
+ return 0;
+}
+
+static struct rtc_class_ops sh_rtc_ops = {
+ .open = sh_rtc_open,
+ .release = sh_rtc_release,
+ .ioctl = sh_rtc_ioctl,
+ .read_time = sh_rtc_read_time,
+ .set_time = sh_rtc_set_time,
+ .proc = sh_rtc_proc,
+};
+
+static int __devinit sh_rtc_probe(struct platform_device *pdev)
+{
+ struct sh_rtc *rtc;
+ struct resource *res;
+ int ret = -ENOENT;
+
+ rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
+ if (unlikely(!rtc))
+ return -ENOMEM;
+
+ spin_lock_init(&rtc->lock);
+
+ rtc->periodic_irq = platform_get_irq(pdev, 0);
+ if (unlikely(rtc->periodic_irq < 0)) {
+ dev_err(&pdev->dev, "No IRQ for period\n");
+ goto err_badres;
+ }
+
+ rtc->carry_irq = platform_get_irq(pdev, 1);
+ if (unlikely(rtc->carry_irq < 0)) {
+ dev_err(&pdev->dev, "No IRQ for carry\n");
+ goto err_badres;
+ }
+
+ rtc->alarm_irq = platform_get_irq(pdev, 2);
+ if (unlikely(rtc->alarm_irq < 0)) {
+ dev_err(&pdev->dev, "No IRQ for alarm\n");
+ goto err_badres;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (unlikely(res == NULL)) {
+ dev_err(&pdev->dev, "No IO resource\n");
+ goto err_badres;
+ }
+
+ rtc->regsize = res->end - res->start + 1;
+
+ rtc->res = request_mem_region(res->start, rtc->regsize, pdev->name);
+ if (unlikely(!rtc->res)) {
+ ret = -EBUSY;
+ goto err_badres;
+ }
+
+ rtc->regbase = (void __iomem *)rtc->res->start;
+ if (unlikely(!rtc->regbase)) {
+ ret = -EINVAL;
+ goto err_badmap;
+ }
+
+ rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
+ &sh_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err_badmap;
+ }
+
+ platform_set_drvdata(pdev, rtc);
+
+ return 0;
+
+err_badmap:
+ release_resource(rtc->res);
+err_badres:
+ kfree(rtc);
+
+ return ret;
+}
+
+static int __devexit sh_rtc_remove(struct platform_device *pdev)
+{
+ struct sh_rtc *rtc = platform_get_drvdata(pdev);
+
+ if (likely(rtc->rtc_dev))
+ rtc_device_unregister(rtc->rtc_dev);
+
+ sh_rtc_setpie(&pdev->dev, 0);
+ sh_rtc_setaie(&pdev->dev, 0);
+
+ release_resource(rtc->res);
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(rtc);
+
+ return 0;
+}
+static struct platform_driver sh_rtc_platform_driver = {
+ .driver = {
+ .name = "sh-rtc",
+ .owner = THIS_MODULE,
+ },
+ .probe = sh_rtc_probe,
+ .remove = __devexit_p(sh_rtc_remove),
+};
+
+static int __init sh_rtc_init(void)
+{
+ return platform_driver_register(&sh_rtc_platform_driver);
+}
+
+static void __exit sh_rtc_exit(void)
+{
+ platform_driver_unregister(&sh_rtc_platform_driver);
+}
+
+module_init(sh_rtc_init);
+module_exit(sh_rtc_exit);
+
+MODULE_DESCRIPTION("SuperH on-chip RTC driver");
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index 0e4a7eb..6b35ed8 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -681,6 +681,7 @@
{ "ADP0400" }, /* 1744 */
{ "" }
};
+MODULE_DEVICE_TABLE(eisa, aha1740_ids);
static struct eisa_driver aha1740_driver = {
.id_table = aha1740_ids,
diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c
index 867cbe2..1ac1197 100644
--- a/drivers/scsi/aic7xxx/aic7770_osm.c
+++ b/drivers/scsi/aic7xxx/aic7770_osm.c
@@ -132,7 +132,8 @@
{ "ADP7770", 5 }, /* AIC7770 generic */
{ "" }
};
-
+MODULE_DEVICE_TABLE(eisa, aic7770_ids);
+
static struct eisa_driver aic7770_driver = {
.id_table = aic7770_ids,
.driver = {
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 592b52a..683fc7a 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1756,16 +1756,23 @@
pmac_call_feature(PMAC_FTR_MESH_ENABLE, macio_get_of_node(ms->mdev), 0, 0);
msleep(10);
}
-}
+}
#ifdef CONFIG_PM
-static int mesh_suspend(struct macio_dev *mdev, pm_message_t state)
+static int mesh_suspend(struct macio_dev *mdev, pm_message_t mesg)
{
struct mesh_state *ms = (struct mesh_state *)macio_get_drvdata(mdev);
unsigned long flags;
- if (state.event == mdev->ofdev.dev.power.power_state.event || state.event < 2)
+ switch (mesg.event) {
+ case PM_EVENT_SUSPEND:
+ case PM_EVENT_FREEZE:
+ break;
+ default:
+ return 0;
+ }
+ if (mesg.event == mdev->ofdev.dev.power.power_state.event)
return 0;
scsi_block_requests(ms->host);
@@ -1780,7 +1787,7 @@
disable_irq(ms->meshintr);
set_mesh_power(ms, 0);
- mdev->ofdev.dev.power.power_state = state;
+ mdev->ofdev.dev.power.power_state = mesg;
return 0;
}
diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c
index b27e854..551bacc 100644
--- a/drivers/scsi/sim710.c
+++ b/drivers/scsi/sim710.c
@@ -282,6 +282,7 @@
{ "HWP0C80" },
{ "" }
};
+MODULE_DEVICE_TABLE(eisa, sim710_eisa_ids);
static __init int
sim710_eisa_probe(struct device *dev)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 5b48ac2..261eaa4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -642,12 +642,17 @@
select SERIAL_CORE_CONSOLE
config SERIAL_SH_SCI
- tristate "SH SCI(F) serial port support"
+ tristate "SuperH SCI(F) serial port support"
depends on SUPERH || H8300
select SERIAL_CORE
+config SERIAL_SH_SCI_NR_UARTS
+ int "Maximum number of SCI(F) serial ports"
+ depends on SERIAL_SH_SCI
+ default "2"
+
config SERIAL_SH_SCI_CONSOLE
- bool "Support for console on SH SCI(F)"
+ bool "Support for console on SuperH SCI(F)"
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index cbede06..f336ba6 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -3,7 +3,7 @@
*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 - 2006 Paul Mundt
*
* based off of the old drivers/char/sh-sci.c by:
*
@@ -20,10 +20,9 @@
#undef DEBUG
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
@@ -32,34 +31,25 @@
#include <linux/major.h>
#include <linux/string.h>
#include <linux/sysrq.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/console.h>
-#include <linux/bitops.h>
-#include <linux/generic_serial.h>
+#include <linux/platform_device.h>
#ifdef CONFIG_CPU_FREQ
#include <linux/notifier.h>
#include <linux/cpufreq.h>
#endif
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
#include <asm/clock.h>
+#include <asm/sh_bios.h>
+#include <asm/kgdb.h>
#endif
-#ifdef CONFIG_SH_STANDARD_BIOS
-#include <asm/sh_bios.h>
-#endif
+#include <asm/sci.h>
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -67,36 +57,51 @@
#include "sh-sci.h"
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
+struct sci_port {
+ struct uart_port port;
-static int kgdb_get_char(struct sci_port *port);
-static void kgdb_put_char(struct sci_port *port, char c);
-static void kgdb_handle_error(struct sci_port *port);
+ /* Port type */
+ unsigned int type;
+
+ /* Port IRQs: ERI, RXI, TXI, BRI (optional) */
+ unsigned int irqs[SCIx_NR_IRQS];
+
+ /* Port pin configuration */
+ void (*init_pins)(struct uart_port *port,
+ unsigned int cflag);
+
+ /* Port enable callback */
+ void (*enable)(struct uart_port *port);
+
+ /* Port disable callback */
+ void (*disable)(struct uart_port *port);
+
+ /* Break timer */
+ struct timer_list break_timer;
+ int break_flag;
+};
+
+#ifdef CONFIG_SH_KGDB
static struct sci_port *kgdb_sci_port;
-#endif /* CONFIG_SH_KGDB */
+#endif
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static struct sci_port *serial_console_port = 0;
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+static struct sci_port *serial_console_port;
+#endif
/* Function prototypes */
static void sci_stop_tx(struct uart_port *port);
-static void sci_start_tx(struct uart_port *port);
-static void sci_start_rx(struct uart_port *port, unsigned int tty_start);
-static void sci_stop_rx(struct uart_port *port);
-static int sci_request_irq(struct sci_port *port);
-static void sci_free_irq(struct sci_port *port);
-static struct sci_port sci_ports[];
+#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
+
+static struct sci_port sci_ports[SCI_NPORTS];
static struct uart_driver sci_uart_driver;
-#define SCI_NPORTS sci_uart_driver.nr
-
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
-
-static void handle_error(struct uart_port *port)
-{ /* Clear error flags */
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
+ defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+static inline void handle_error(struct uart_port *port)
+{
+ /* Clear error flags */
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
}
@@ -106,8 +111,8 @@
unsigned short status;
int c;
- local_irq_save(flags);
- do {
+ spin_lock_irqsave(&port->lock, flags);
+ do {
status = sci_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
handle_error(port);
@@ -117,38 +122,19 @@
c = sci_in(port, SCxRDR);
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
return c;
}
-
-/* Taken from sh-stub.c of GDB 4.18 */
-static const char hexchars[] = "0123456789abcdef";
-
-static __inline__ char highhex(int x)
-{
- return hexchars[(x >> 4) & 0xf];
-}
-
-static __inline__ char lowhex(int x)
-{
- return hexchars[x & 0xf];
-}
-
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
-/*
- * Send the packet in buffer. The host gets one chance to read it.
- * This routine does not wait for a positive acknowledge.
- */
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
static void put_char(struct uart_port *port, char c)
{
unsigned long flags;
unsigned short status;
- local_irq_save(flags);
+ spin_lock_irqsave(&port->lock, flags);
do {
status = sci_in(port, SCxSR);
@@ -158,9 +144,11 @@
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
}
+#endif
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static void put_string(struct sci_port *sci_port, const char *buffer, int count)
{
struct uart_port *port = &sci_port->port;
@@ -213,96 +201,28 @@
}
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-
#ifdef CONFIG_SH_KGDB
-
-/* Is the SCI ready, ie is there a char waiting? */
-static int kgdb_is_char_ready(struct sci_port *port)
-{
- unsigned short status = sci_in(port, SCxSR);
-
- if (status & (SCxSR_ERRORS(port) | SCxSR_BRK(port)))
- kgdb_handle_error(port);
-
- return (status & SCxSR_RDxF(port));
-}
-
-/* Write a char */
-static void kgdb_put_char(struct sci_port *port, char c)
-{
- unsigned short status;
-
- do
- status = sci_in(port, SCxSR);
- while (!(status & SCxSR_TDxE(port)));
-
- sci_out(port, SCxTDR, c);
- sci_in(port, SCxSR); /* Dummy read */
- sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
-}
-
-/* Get a char if there is one, else ret -1 */
-static int kgdb_get_char(struct sci_port *port)
+static int kgdb_sci_getchar(void)
{
int c;
- if (kgdb_is_char_ready(port) == 0)
- c = -1;
- else {
- c = sci_in(port, SCxRDR);
- sci_in(port, SCxSR); /* Dummy read */
- sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
- }
-
- return c;
-}
-
-/* Called from kgdbstub.c to get a character, i.e. is blocking */
-static int kgdb_sci_getchar(void)
-{
- volatile int c;
-
/* Keep trying to read a character, this could be neater */
- while ((c = kgdb_get_char(kgdb_sci_port)) < 0);
+ while ((c = get_char(kgdb_sci_port)) < 0)
+ cpu_relax();
return c;
}
-/* Called from kgdbstub.c to put a character, just a wrapper */
-static void kgdb_sci_putchar(int c)
+static inline void kgdb_sci_putchar(int c)
{
-
- kgdb_put_char(kgdb_sci_port, c);
+ put_char(kgdb_sci_port, c);
}
-
-/* Clear any errors on the SCI */
-static void kgdb_handle_error(struct sci_port *port)
-{
- sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Clear error flags */
-}
-
-/* Breakpoint if there's a break sent on the serial port */
-static void kgdb_break_interrupt(int irq, void *ptr, struct pt_regs *regs)
-{
- struct sci_port *port = ptr;
- unsigned short status = sci_in(port, SCxSR);
-
- if (status & SCxSR_BRK(port)) {
-
- /* Break into the debugger if a break is detected */
- BREAKPOINT();
-
- /* Clear */
- sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
- }
-}
-
#endif /* CONFIG_SH_KGDB */
#if defined(__H8300S__)
enum { sci_disable, sci_enable };
-static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl)
+static void h8300_sci_config(struct uart_port* port, unsigned int ctrl)
{
volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
int ch = (port->mapbase - SMR0) >> 3;
@@ -314,32 +234,66 @@
*mstpcrl &= ~mask;
}
}
+
+static inline void h8300_sci_enable(struct uart_port *port)
+{
+ h8300_sci_config(port, sci_enable);
+}
+
+static inline void h8300_sci_disable(struct uart_port *port)
+{
+ h8300_sci_config(port, sci_disable);
+}
#endif
-#if defined(SCI_ONLY) || defined(SCI_AND_SCIF)
-#if defined(__H8300H__) || defined(__H8300S__)
+#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \
+ defined(__H8300H__) || defined(__H8300S__)
static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
{
int ch = (port->mapbase - SMR0) >> 3;
/* set DDR regs */
- H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].rx,H8300_GPIO_INPUT);
- H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].tx,H8300_GPIO_OUTPUT);
+ H8300_GPIO_DDR(h8300_sci_pins[ch].port,
+ h8300_sci_pins[ch].rx,
+ H8300_GPIO_INPUT);
+ H8300_GPIO_DDR(h8300_sci_pins[ch].port,
+ h8300_sci_pins[ch].tx,
+ H8300_GPIO_OUTPUT);
+
/* tx mark output*/
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
}
+#else
+#define sci_init_pins_sci NULL
#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+
+ if (cflag & CRTSCTS)
+ fcr_val |= SCFCR_MCE;
+
+ sci_out(port, SCFCR, fcr_val);
+}
+#else
+#define sci_init_pins_irda NULL
+#endif
+
+#ifdef SCI_ONLY
+#define sci_init_pins_scif NULL
#endif
#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710)
/* SH7300 doesn't use RTS/CTS */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
sci_out(port, SCFCR, 0);
}
#elif defined(CONFIG_CPU_SH3)
-/* For SH7705, SH7707, SH7709, SH7709A, SH7729 */
+/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
@@ -366,20 +320,7 @@
sci_out(port, SCFCR, fcr_val);
}
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
-{
- unsigned int fcr_val = 0;
-
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
-
- sci_out(port, SCFCR, fcr_val);
-}
-#endif
#else
-
/* For SH7750 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
@@ -388,7 +329,9 @@
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
} else {
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#ifdef CONFIG_CPU_SUBTYPE_SH7343
+ /* Nothing */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
@@ -396,10 +339,41 @@
}
sci_out(port, SCFCR, fcr_val);
}
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+static inline int scif_txroom(struct uart_port *port)
+{
+ return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
+}
+
+static inline int scif_rxroom(struct uart_port *port)
+{
+ return sci_in(port, SCRFDR) & 0x7f;
+}
+#else
+static inline int scif_txroom(struct uart_port *port)
+{
+ return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+}
+
+static inline int scif_rxroom(struct uart_port *port)
+{
+ return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+}
#endif
#endif /* SCIF_ONLY || SCI_AND_SCIF */
+static inline int sci_txroom(struct uart_port *port)
+{
+ return ((sci_in(port, SCxSR) & SCI_TDRE) != 0);
+}
+
+static inline int sci_rxroom(struct uart_port *port)
+{
+ return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0);
+}
+
/* ********************************************************************** *
* the interrupt related routines *
* ********************************************************************** */
@@ -408,14 +382,12 @@
{
struct circ_buf *xmit = &port->info->xmit;
unsigned int stopped = uart_tx_stopped(port);
- unsigned long flags;
unsigned short status;
unsigned short ctrl;
- int count, txroom;
+ int count;
status = sci_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
- local_irq_save(flags);
ctrl = sci_in(port, SCSCR);
if (uart_circ_empty(xmit)) {
ctrl &= ~SCI_CTRL_FLAGS_TIE;
@@ -423,25 +395,15 @@
ctrl |= SCI_CTRL_FLAGS_TIE;
}
sci_out(port, SCSCR, ctrl);
- local_irq_restore(flags);
return;
}
-#if !defined(SCI_ONLY)
- if (port->type == PORT_SCIF) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
- txroom = SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
-#else
- txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+#ifndef SCI_ONLY
+ if (port->type == PORT_SCIF)
+ count = scif_txroom(port);
+ else
#endif
- } else {
- txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
- }
-#else
- txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
-#endif
-
- count = txroom;
+ count = sci_txroom(port);
do {
unsigned char c;
@@ -468,7 +430,6 @@
if (uart_circ_empty(xmit)) {
sci_stop_tx(port);
} else {
- local_irq_save(flags);
ctrl = sci_in(port, SCSCR);
#if !defined(SCI_ONLY)
@@ -480,7 +441,6 @@
ctrl |= SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
- local_irq_restore(flags);
}
}
@@ -490,6 +450,7 @@
static inline void sci_receive_chars(struct uart_port *port,
struct pt_regs *regs)
{
+ struct sci_port *sci_port = (struct sci_port *)port;
struct tty_struct *tty = port->info->tty;
int i, count, copied = 0;
unsigned short status;
@@ -501,18 +462,11 @@
while (1) {
#if !defined(SCI_ONLY)
- if (port->type == PORT_SCIF) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
- count = sci_in(port, SCRFDR) & 0x7f;
-#else
- count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+ if (port->type == PORT_SCIF)
+ count = scif_rxroom(port);
+ else
#endif
- } else {
- count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
- }
-#else
- count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
-#endif
+ count = sci_rxroom(port);
/* Don't copy more bytes than there is room for in the buffer */
count = tty_buffer_request_room(tty, count);
@@ -523,11 +477,10 @@
if (port->type == PORT_SCI) {
char c = sci_in(port, SCxRDR);
- if(((struct sci_port *)port)->break_flag
- || uart_handle_sysrq_char(port, c, regs)) {
+ if (uart_handle_sysrq_char(port, c, regs) || sci_port->break_flag)
count = 0;
- } else {
- tty_insert_flip_char(tty, c, TTY_NORMAL);
+ else {
+ tty_insert_flip_char(tty, c, TTY_NORMAL);
}
} else {
for (i=0; i<count; i++) {
@@ -535,15 +488,17 @@
status = sci_in(port, SCxSR);
#if defined(CONFIG_CPU_SH3)
/* Skip "chars" during break */
- if (((struct sci_port *)port)->break_flag) {
+ if (sci_port->break_flag) {
if ((c == 0) &&
(status & SCxSR_FER(port))) {
count--; i--;
continue;
}
+
/* Nonzero => end-of-break */
pr_debug("scif: debounce<%02x>\n", c);
- ((struct sci_port *)port)->break_flag = 0;
+ sci_port->break_flag = 0;
+
if (STEPFN(c)) {
count--; i--;
continue;
@@ -600,15 +555,17 @@
/* Ensure that two consecutive samples find the break over. */
static void sci_break_timer(unsigned long data)
{
- struct sci_port * port = (struct sci_port *)data;
- if(sci_rxd_in(&port->port) == 0) {
+ struct sci_port *port = (struct sci_port *)data;
+
+ if (sci_rxd_in(&port->port) == 0) {
port->break_flag = 1;
- sci_schedule_break_timer(port);
- } else if(port->break_flag == 1){
+ sci_schedule_break_timer(port);
+ } else if (port->break_flag == 1) {
/* break is over. */
port->break_flag = 2;
- sci_schedule_break_timer(port);
- } else port->break_flag = 0;
+ sci_schedule_break_timer(port);
+ } else
+ port->break_flag = 0;
}
static inline int sci_handle_errors(struct uart_port *port)
@@ -617,40 +574,41 @@
unsigned short status = sci_in(port, SCxSR);
struct tty_struct *tty = port->info->tty;
- if (status&SCxSR_ORER(port)) {
+ if (status & SCxSR_ORER(port)) {
/* overrun error */
- if(tty_insert_flip_char(tty, 0, TTY_OVERRUN))
+ if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
copied++;
pr_debug("sci: overrun error\n");
}
- if (status&SCxSR_FER(port)) {
+ if (status & SCxSR_FER(port)) {
if (sci_rxd_in(port) == 0) {
/* Notify of BREAK */
- struct sci_port * sci_port = (struct sci_port *)port;
- if(!sci_port->break_flag) {
- sci_port->break_flag = 1;
- sci_schedule_break_timer((struct sci_port *)port);
+ struct sci_port *sci_port = (struct sci_port *)port;
+
+ if (!sci_port->break_flag) {
+ sci_port->break_flag = 1;
+ sci_schedule_break_timer(sci_port);
+
/* Do sysrq handling. */
- if(uart_handle_break(port))
+ if (uart_handle_break(port))
return 0;
pr_debug("sci: BREAK detected\n");
- if(tty_insert_flip_char(tty, 0, TTY_BREAK))
+ if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
}
- }
- else {
+ } else {
/* frame error */
- if(tty_insert_flip_char(tty, 0, TTY_FRAME))
+ if (tty_insert_flip_char(tty, 0, TTY_FRAME))
copied++;
pr_debug("sci: frame error\n");
}
}
- if (status&SCxSR_PER(port)) {
- if(tty_insert_flip_char(tty, 0, TTY_PARITY))
- copied++;
+ if (status & SCxSR_PER(port)) {
/* parity error */
+ if (tty_insert_flip_char(tty, 0, TTY_PARITY))
+ copied++;
pr_debug("sci: parity error\n");
}
@@ -673,7 +631,7 @@
s->break_flag = 1;
#endif
/* Notify of BREAK */
- if(tty_insert_flip_char(tty, 0, TTY_BREAK))
+ if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
pr_debug("sci: BREAK detected\n");
}
@@ -682,7 +640,7 @@
/* XXX: Handle SCIF overrun error */
if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
sci_out(port, SCLSR, 0);
- if(tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
+ if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
copied++;
pr_debug("sci: overrun error\n");
}
@@ -691,13 +649,12 @@
if (copied)
tty_flip_buffer_push(tty);
+
return copied;
}
-static irqreturn_t sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs)
+static irqreturn_t sci_rx_interrupt(int irq, void *port, struct pt_regs *regs)
{
- struct uart_port *port = ptr;
-
/* I think sci_receive_chars has to be called irrespective
* of whether the I_IXOFF is set, otherwise, how is the interrupt
* to be disabled?
@@ -711,7 +668,9 @@
{
struct uart_port *port = ptr;
+ spin_lock_irq(&port->lock);
sci_transmit_chars(port);
+ spin_unlock_irq(&port->lock);
return IRQ_HANDLED;
}
@@ -755,6 +714,12 @@
/* Handle BREAKs */
sci_handle_breaks(port);
+
+#ifdef CONFIG_SH_KGDB
+ /* Break into the debugger if a break is detected */
+ BREAKPOINT();
+#endif
+
sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
return IRQ_HANDLED;
@@ -769,16 +734,16 @@
scr_status = sci_in(port,SCSCR);
/* Tx Interrupt */
- if ((ssr_status&0x0020) && (scr_status&0x0080))
+ if ((ssr_status & 0x0020) && (scr_status & 0x0080))
sci_tx_interrupt(irq, ptr, regs);
/* Rx Interrupt */
- if ((ssr_status&0x0002) && (scr_status&0x0040))
+ if ((ssr_status & 0x0002) && (scr_status & 0x0040))
sci_rx_interrupt(irq, ptr, regs);
/* Error Interrupt */
- if ((ssr_status&0x0080) && (scr_status&0x0400))
+ if ((ssr_status & 0x0080) && (scr_status & 0x0400))
sci_er_interrupt(irq, ptr, regs);
/* Break Interrupt */
- if ((ssr_status&0x0010) && (scr_status&0x0200))
+ if ((ssr_status & 0x0010) && (scr_status & 0x0200))
sci_br_interrupt(irq, ptr, regs);
return IRQ_HANDLED;
@@ -789,7 +754,8 @@
* Here we define a transistion notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
*/
-static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p)
+static int sci_notifier(struct notifier_block *self,
+ unsigned long phase, void *p)
{
struct cpufreq_freqs *freqs = p;
int i;
@@ -816,8 +782,9 @@
clk_put(clk);
}
- printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
- __FUNCTION__, freqs->cpu, freqs->old, freqs->new);
+ printk(KERN_INFO "%s: got a postchange notification "
+ "for cpu %d (old %d, new %d)\n",
+ __FUNCTION__, freqs->cpu, freqs->old, freqs->new);
}
return NOTIFY_OK;
@@ -841,8 +808,9 @@
printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
return -ENODEV;
}
- if (request_irq(port->irqs[0], sci_mpxed_interrupt, IRQF_DISABLED,
- "sci", port)) {
+
+ if (request_irq(port->irqs[0], sci_mpxed_interrupt,
+ SA_INTERRUPT, "sci", port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
}
@@ -850,8 +818,8 @@
for (i = 0; i < ARRAY_SIZE(handlers); i++) {
if (!port->irqs[i])
continue;
- if (request_irq(port->irqs[i], handlers[i], IRQF_DISABLED,
- desc[i], port)) {
+ if (request_irq(port->irqs[i], handlers[i],
+ SA_INTERRUPT, desc[i], port)) {
printk(KERN_ERR "sci: Cannot allocate irq.\n");
return -ENODEV;
}
@@ -903,50 +871,42 @@
static void sci_start_tx(struct uart_port *port)
{
- struct sci_port *s = &sci_ports[port->line];
+ unsigned short ctrl;
- disable_irq(s->irqs[SCIx_TXI_IRQ]);
- sci_transmit_chars(port);
- enable_irq(s->irqs[SCIx_TXI_IRQ]);
+ /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = sci_in(port, SCSCR);
+ ctrl |= SCI_CTRL_FLAGS_TIE;
+ sci_out(port, SCSCR, ctrl);
}
static void sci_stop_tx(struct uart_port *port)
{
- unsigned long flags;
unsigned short ctrl;
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
- local_irq_save(flags);
ctrl = sci_in(port, SCSCR);
ctrl &= ~SCI_CTRL_FLAGS_TIE;
sci_out(port, SCSCR, ctrl);
- local_irq_restore(flags);
}
static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
{
- unsigned long flags;
unsigned short ctrl;
/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
- local_irq_save(flags);
ctrl = sci_in(port, SCSCR);
ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
sci_out(port, SCSCR, ctrl);
- local_irq_restore(flags);
}
static void sci_stop_rx(struct uart_port *port)
{
- unsigned long flags;
unsigned short ctrl;
/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
- local_irq_save(flags);
ctrl = sci_in(port, SCSCR);
ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
sci_out(port, SCSCR, ctrl);
- local_irq_restore(flags);
}
static void sci_enable_ms(struct uart_port *port)
@@ -963,9 +923,8 @@
{
struct sci_port *s = &sci_ports[port->line];
-#if defined(__H8300S__)
- h8300_sci_enable(port, sci_enable);
-#endif
+ if (s->enable)
+ s->enable(port);
sci_request_irq(s);
sci_start_tx(port);
@@ -982,9 +941,8 @@
sci_stop_tx(port);
sci_free_irq(s);
-#if defined(__H8300S__)
- h8300_sci_enable(port, sci_disable);
-#endif
+ if (s->disable)
+ s->disable(port);
}
static void sci_set_termios(struct uart_port *port, struct termios *termios,
@@ -997,34 +955,6 @@
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- spin_lock_irqsave(&port->lock, flags);
-
- do {
- status = sci_in(port, SCxSR);
- } while (!(status & SCxSR_TEND(port)));
-
- sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
-
-#if !defined(SCI_ONLY)
- if (port->type == PORT_SCIF) {
- sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
- }
-#endif
-
- smr_val = sci_in(port, SCSMR) & 3;
- if ((termios->c_cflag & CSIZE) == CS7)
- smr_val |= 0x40;
- if (termios->c_cflag & PARENB)
- smr_val |= 0x20;
- if (termios->c_cflag & PARODD)
- smr_val |= 0x30;
- if (termios->c_cflag & CSTOPB)
- smr_val |= 0x08;
-
- uart_update_timeout(port, termios->c_cflag, baud);
-
- sci_out(port, SCSMR, smr_val);
-
switch (baud) {
case 0:
t = -1;
@@ -1042,6 +972,33 @@
break;
}
+ spin_lock_irqsave(&port->lock, flags);
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF)
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+#endif
+
+ smr_val = sci_in(port, SCSMR) & 3;
+ if ((termios->c_cflag & CSIZE) == CS7)
+ smr_val |= 0x40;
+ if (termios->c_cflag & PARENB)
+ smr_val |= 0x20;
+ if (termios->c_cflag & PARODD)
+ smr_val |= 0x30;
+ if (termios->c_cflag & CSTOPB)
+ smr_val |= 0x08;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ sci_out(port, SCSMR, smr_val);
+
if (t > 0) {
if(t >= 256) {
sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
@@ -1092,11 +1049,23 @@
port->type = s->type;
+ switch (port->type) {
+ case PORT_SCI:
+ s->init_pins = sci_init_pins_sci;
+ break;
+ case PORT_SCIF:
+ s->init_pins = sci_init_pins_scif;
+ break;
+ case PORT_IRDA:
+ s->init_pins = sci_init_pins_irda;
+ break;
+ }
+
#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
if (port->mapbase == 0)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
- port->membase = (void *)port->mapbase;
+ port->membase = (void __iomem *)port->mapbase;
#endif
}
@@ -1132,412 +1101,61 @@
.verify_port = sci_verify_port,
};
-static struct sci_port sci_ports[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7708)
- {
- .port = {
- .membase = (void *)0xfffffe80,
- .mapbase = 0xfffffe80,
- .iotype = UPIO_MEM,
- .irq = 25,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCI,
- .irqs = SCI_IRQS,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
- {
- .port = {
- .membase = (void *)SCIF0,
- .mapbase = SCIF0,
- .iotype = UPIO_MEM,
- .irq = 55,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH3_IRDA_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)SCIF2,
- .mapbase = SCIF2,
- .iotype = UPIO_MEM,
- .irq = 59,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCIF,
- .irqs = SH3_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
- {
- .port = {
- .membase = (void *)0xfffffe80,
- .mapbase = 0xfffffe80,
- .iotype = UPIO_MEM,
- .irq = 25,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCI,
- .irqs = SCI_IRQS,
- },
- {
- .port = {
- .membase = (void *)0xa4000150,
- .mapbase = 0xa4000150,
- .iotype = UPIO_MEM,
- .irq = 59,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCIF,
- .irqs = SH3_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)0xa4000140,
- .mapbase = 0xa4000140,
- .iotype = UPIO_MEM,
- .irq = 55,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- },
- .type = PORT_IRDA,
- .irqs = SH3_IRDA_IRQS,
- .init_pins = sci_init_pins_irda,
- }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
- {
- .port = {
- .membase = (void *)0xA4430000,
- .mapbase = 0xA4430000,
- .iotype = UPIO_MEM,
- .irq = 25,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH7300_SCIF0_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
- {
- .port = {
- .membase = (void *)0xffe00000,
- .mapbase = 0xffe00000,
- .iotype = UPIO_MEM,
- .irq = 25,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH73180_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
- {
- .port = {
- .membase = (void *)0xffe80000,
- .mapbase = 0xffe80000,
- .iotype = UPIO_MEM,
- .irq = 43,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH4_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
- {
- .port = {
- .membase = (void *)0xffe00000,
- .mapbase = 0xffe00000,
- .iotype = UPIO_MEM,
- .irq = 25,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCI,
- .irqs = SCI_IRQS,
- },
- {
- .port = {
- .membase = (void *)0xffe80000,
- .mapbase = 0xffe80000,
- .iotype = UPIO_MEM,
- .irq = 43,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCIF,
- .irqs = SH4_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .port = {
- .membase = (void *)0xfe600000,
- .mapbase = 0xfe600000,
- .iotype = UPIO_MEM,
- .irq = 55,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH7760_SCIF0_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)0xfe610000,
- .mapbase = 0xfe610000,
- .iotype = UPIO_MEM,
- .irq = 75,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCIF,
- .irqs = SH7760_SCIF1_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)0xfe620000,
- .mapbase = 0xfe620000,
- .iotype = UPIO_MEM,
- .irq = 79,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- },
- .type = PORT_SCIF,
- .irqs = SH7760_SCIF2_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
- {
- .port = {
- .membase = (void *)0xffe00000,
- .mapbase = 0xffe00000,
- .iotype = UPIO_MEM,
- .irq = 26,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = STB1_SCIF1_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)0xffe80000,
- .mapbase = 0xffe80000,
- .iotype = UPIO_MEM,
- .irq = 43,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCIF,
- .irqs = SH4_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
- {
- .port = {
- .iotype = UPIO_MEM,
- .irq = 42,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH5_SCIF_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
- {
- .port = {
- .membase = (void *)0x00ffffb0,
- .mapbase = 0x00ffffb0,
- .iotype = UPIO_MEM,
- .irq = 54,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCI,
- .irqs = H8300H_SCI_IRQS0,
- .init_pins = sci_init_pins_sci,
- },
- {
- .port = {
- .membase = (void *)0x00ffffb8,
- .mapbase = 0x00ffffb8,
- .iotype = UPIO_MEM,
- .irq = 58,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCI,
- .irqs = H8300H_SCI_IRQS1,
- .init_pins = sci_init_pins_sci,
- },
- {
- .port = {
- .membase = (void *)0x00ffffc0,
- .mapbase = 0x00ffffc0,
- .iotype = UPIO_MEM,
- .irq = 62,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- },
- .type = PORT_SCI,
- .irqs = H8300H_SCI_IRQS2,
- .init_pins = sci_init_pins_sci,
- },
-#elif defined(CONFIG_H8S2678)
- {
- .port = {
- .membase = (void *)0x00ffff78,
- .mapbase = 0x00ffff78,
- .iotype = UPIO_MEM,
- .irq = 90,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCI,
- .irqs = H8S_SCI_IRQS0,
- .init_pins = sci_init_pins_sci,
- },
- {
- .port = {
- .membase = (void *)0x00ffff80,
- .mapbase = 0x00ffff80,
- .iotype = UPIO_MEM,
- .irq = 94,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCI,
- .irqs = H8S_SCI_IRQS1,
- .init_pins = sci_init_pins_sci,
- },
- {
- .port = {
- .membase = (void *)0x00ffff88,
- .mapbase = 0x00ffff88,
- .iotype = UPIO_MEM,
- .irq = 98,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- },
- .type = PORT_SCI,
- .irqs = H8S_SCI_IRQS2,
- .init_pins = sci_init_pins_sci,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
- {
- .port = {
- .membase = (void *)0xff923000,
- .mapbase = 0xff923000,
- .iotype = UPIO_MEM,
- .irq = 61,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH7770_SCIF0_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)0xff924000,
- .mapbase = 0xff924000,
- .iotype = UPIO_MEM,
- .irq = 62,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCIF,
- .irqs = SH7770_SCIF1_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)0xff925000,
- .mapbase = 0xff925000,
- .iotype = UPIO_MEM,
- .irq = 63,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- },
- .type = PORT_SCIF,
- .irqs = SH7770_SCIF2_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .port = {
- .membase = (void *)0xffe00000,
- .mapbase = 0xffe00000,
- .iotype = UPIO_MEM,
- .irq = 43,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- .type = PORT_SCIF,
- .irqs = SH7780_SCIF0_IRQS,
- .init_pins = sci_init_pins_scif,
- },
- {
- .port = {
- .membase = (void *)0xffe10000,
- .mapbase = 0xffe10000,
- .iotype = UPIO_MEM,
- .irq = 79,
- .ops = &sci_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- .type = PORT_SCIF,
- .irqs = SH7780_SCIF1_IRQS,
- .init_pins = sci_init_pins_scif,
- },
-#else
-#error "CPU subtype not defined"
+static void __init sci_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+
+ first = 0;
+
+ for (i = 0; i < SCI_NPORTS; i++) {
+ sci_ports[i].port.ops = &sci_uart_ops;
+ sci_ports[i].port.iotype = UPIO_MEM;
+ sci_ports[i].port.line = i;
+ sci_ports[i].port.fifosize = 1;
+
+#if defined(__H8300H__) || defined(__H8300S__)
+#ifdef __H8300S__
+ sci_ports[i].enable = h8300_sci_enable;
+ sci_ports[i].disable = h8300_sci_disable;
#endif
-};
+ sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
+#elif defined(CONFIG_SUPERH64)
+ sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16;
+#else
+ /*
+ * XXX: We should use a proper SCI/SCIF clock
+ */
+ {
+ struct clk *clk = clk_get("module_clk");
+ sci_ports[i].port.uartclk = clk_get_rate(clk) * 16;
+ clk_put(clk);
+ }
+#endif
+
+ sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
+ sci_ports[i].break_timer.function = sci_break_timer;
+
+ init_timer(&sci_ports[i].break_timer);
+ }
+}
+
+int __init early_sci_setup(struct uart_port *port)
+{
+ if (unlikely(port->line > SCI_NPORTS))
+ return -ENODEV;
+
+ sci_init_ports();
+
+ sci_ports[port->line].port.membase = port->membase;
+ sci_ports[port->line].port.mapbase = port->mapbase;
+ sci_ports[port->line].port.type = port->type;
+
+ return 0;
+}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
/*
@@ -1559,34 +1177,38 @@
int flow = 'n';
int ret;
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= SCI_NPORTS)
+ co->index = 0;
+
serial_console_port = &sci_ports[co->index];
port = &serial_console_port->port;
- port->type = serial_console_port->type;
-
-#ifdef CONFIG_SUPERH64
- /* This is especially needed on sh64 to remap the SCIF */
- sci_config_port(port, 0);
-#endif
/*
- * We need to set the initial uartclk here, since otherwise it will
- * only ever be setup at sci_init() time.
+ * Also need to check port->type, we don't actually have any
+ * UPIO_PORT ports, but uart_report_port() handily misreports
+ * it anyways if we don't have a port available by the time this is
+ * called.
*/
-#if defined(__H8300H__) || defined(__H8300S__)
- port->uartclk = CONFIG_CPU_CLOCK;
+ if (!port->type)
+ return -ENODEV;
+ if (!port->membase || !port->mapbase)
+ return -ENODEV;
-#if defined(__H8300S__)
- h8300_sci_enable(port, sci_enable);
-#endif
-#elif defined(CONFIG_SUPERH64)
- port->uartclk = current_cpu_data.module_clock * 16;
-#else
- {
- struct clk *clk = clk_get("module_clk");
- port->uartclk = clk_get_rate(clk) * 16;
- clk_put(clk);
- }
-#endif
+ spin_lock_init(&port->lock);
+
+ port->type = serial_console_port->type;
+
+ if (port->flags & UPF_IOREMAP)
+ sci_config_port(port, 0);
+
+ if (serial_console_port->enable)
+ serial_console_port->enable(port);
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1604,17 +1226,17 @@
.device = uart_console_device,
.write = serial_console_write,
.setup = serial_console_setup,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER,
.index = -1,
.data = &sci_uart_driver,
};
static int __init sci_console_init(void)
{
+ sci_init_ports();
register_console(&serial_console);
return 0;
}
-
console_initcall(sci_console_init);
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
@@ -1649,6 +1271,8 @@
int parity = 'n';
int flow = 'n';
+ spin_lock_init(&port->lock);
+
if (co->index != kgdb_portnum)
co->index = kgdb_portnum;
@@ -1677,10 +1301,10 @@
/* Register the KGDB console so we get messages (d'oh!) */
static int __init kgdb_console_init(void)
{
+ sci_init_ports();
register_console(&kgdb_console);
return 0;
}
-
console_initcall(kgdb_console_init);
#endif /* CONFIG_SH_KGDB_CONSOLE */
@@ -1701,60 +1325,132 @@
.dev_name = "ttySC",
.major = SCI_MAJOR,
.minor = SCI_MINOR_START,
+ .nr = SCI_NPORTS,
.cons = SCI_CONSOLE,
};
-static int __init sci_init(void)
+/*
+ * Register a set of serial devices attached to a platform device. The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need
+ * remapping (such as sh64) should also set UPF_IOREMAP.
+ */
+static int __devinit sci_probe(struct platform_device *dev)
{
- int chan, ret;
+ struct plat_sci_port *p = dev->dev.platform_data;
+ int i;
- printk("%s", banner);
+ for (i = 0; p && p->flags != 0 && i < SCI_NPORTS; p++, i++) {
+ struct sci_port *sciport = &sci_ports[i];
- sci_uart_driver.nr = ARRAY_SIZE(sci_ports);
+ sciport->port.mapbase = p->mapbase;
- ret = uart_register_driver(&sci_uart_driver);
- if (ret == 0) {
- for (chan = 0; chan < SCI_NPORTS; chan++) {
- struct sci_port *sciport = &sci_ports[chan];
+ /*
+ * For the simple (and majority of) cases where we don't need
+ * to do any remapping, just cast the cookie directly.
+ */
+ if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP))
+ p->membase = (void __iomem *)p->mapbase;
-#if defined(__H8300H__) || defined(__H8300S__)
- sciport->port.uartclk = CONFIG_CPU_CLOCK;
-#elif defined(CONFIG_SUPERH64)
- sciport->port.uartclk = current_cpu_data.module_clock * 16;
-#else
- struct clk *clk = clk_get("module_clk");
- sciport->port.uartclk = clk_get_rate(clk) * 16;
- clk_put(clk);
-#endif
- uart_add_one_port(&sci_uart_driver, &sciport->port);
- sciport->break_timer.data = (unsigned long)sciport;
- sciport->break_timer.function = sci_break_timer;
- init_timer(&sciport->break_timer);
- }
+ sciport->port.membase = p->membase;
+
+ sciport->port.irq = p->irqs[SCIx_TXI_IRQ];
+ sciport->port.flags = p->flags;
+ sciport->port.dev = &dev->dev;
+
+ sciport->type = sciport->port.type = p->type;
+
+ memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
+
+ uart_add_one_port(&sci_uart_driver, &sciport->port);
}
#ifdef CONFIG_CPU_FREQ
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
- printk("sci: CPU frequency notifier registered\n");
+ dev_info(&dev->dev, "sci: CPU frequency notifier registered\n");
#endif
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_gdb_detach();
#endif
+ return 0;
+}
+
+static int __devexit sci_remove(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < SCI_NPORTS; i++)
+ uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
+
+ return 0;
+}
+
+static int sci_suspend(struct platform_device *dev, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i < SCI_NPORTS; i++) {
+ struct sci_port *p = &sci_ports[i];
+
+ if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
+ uart_suspend_port(&sci_uart_driver, &p->port);
+ }
+
+ return 0;
+}
+
+static int sci_resume(struct platform_device *dev)
+{
+ int i;
+
+ for (i = 0; i < SCI_NPORTS; i++) {
+ struct sci_port *p = &sci_ports[i];
+
+ if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
+ uart_resume_port(&sci_uart_driver, &p->port);
+ }
+
+ return 0;
+}
+
+static struct platform_driver sci_driver = {
+ .probe = sci_probe,
+ .remove = __devexit_p(sci_remove),
+ .suspend = sci_suspend,
+ .resume = sci_resume,
+ .driver = {
+ .name = "sh-sci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init sci_init(void)
+{
+ int ret;
+
+ printk(banner);
+
+ sci_init_ports();
+
+ ret = uart_register_driver(&sci_uart_driver);
+ if (likely(ret == 0)) {
+ ret = platform_driver_register(&sci_driver);
+ if (unlikely(ret))
+ uart_unregister_driver(&sci_uart_driver);
+ }
+
return ret;
}
static void __exit sci_exit(void)
{
- int chan;
-
- for (chan = 0; chan < SCI_NPORTS; chan++)
- uart_remove_one_port(&sci_uart_driver, &sci_ports[chan].port);
-
+ platform_driver_unregister(&sci_driver);
uart_unregister_driver(&sci_uart_driver);
}
module_init(sci_init);
module_exit(sci_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index ab320fa..28643c4 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -10,7 +10,9 @@
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
*/
+#include <linux/config.h>
#include <linux/serial_core.h>
+#include <asm/io.h>
#if defined(__H8300H__) || defined(__H8300S__)
#include <asm/gpio.h>
@@ -22,40 +24,13 @@
#endif
#endif
-/* Offsets into the sci_port->irqs array */
-#define SCIx_ERI_IRQ 0
-#define SCIx_RXI_IRQ 1
-#define SCIx_TXI_IRQ 2
-
-/* ERI, RXI, TXI, BRI */
-#define SCI_IRQS { 23, 24, 25, 0 }
-#define SH3_SCIF_IRQS { 56, 57, 59, 58 }
-#define SH3_IRDA_IRQS { 52, 53, 55, 54 }
-#define SH4_SCIF_IRQS { 40, 41, 43, 42 }
-#define STB1_SCIF1_IRQS {23, 24, 26, 25 }
-#define SH7760_SCIF0_IRQS { 52, 53, 55, 54 }
-#define SH7760_SCIF1_IRQS { 72, 73, 75, 74 }
-#define SH7760_SCIF2_IRQS { 76, 77, 79, 78 }
-#define SH7300_SCIF0_IRQS {80, 80, 80, 80 }
-#define SH73180_SCIF_IRQS {80, 81, 83, 82 }
-#define H8300H_SCI_IRQS0 {52, 53, 54, 0 }
-#define H8300H_SCI_IRQS1 {56, 57, 58, 0 }
-#define H8300H_SCI_IRQS2 {60, 61, 62, 0 }
-#define H8S_SCI_IRQS0 {88, 89, 90, 0 }
-#define H8S_SCI_IRQS1 {92, 93, 94, 0 }
-#define H8S_SCI_IRQS2 {96, 97, 98, 0 }
-#define SH5_SCIF_IRQS {39, 40, 42, 0 }
-#define SH7770_SCIF0_IRQS {61, 61, 61, 61 }
-#define SH7770_SCIF1_IRQS {62, 62, 62, 62 }
-#define SH7770_SCIF2_IRQS {63, 63, 63, 63 }
-#define SH7780_SCIF0_IRQS {40, 41, 43, 42 }
-#define SH7780_SCIF1_IRQS {76, 77, 79, 78 }
-
#if defined(CONFIG_CPU_SUBTYPE_SH7708)
# define SCSPTR 0xffffff7c /* 8 bit */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCI_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706)
# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
@@ -99,12 +74,23 @@
# define SCPDR 0xA4050136 /* 16 bit SCIF */
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
+# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
# define SCPDR 0xA4050138 /* 16 bit SCIF */
# define SCSPTR2 SCPDR
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
+# define SCSPTR0 0xffe00010 /* 16 bit SCIF */
+# define SCSPTR1 0xffe10010 /* 16 bit SCIF */
+# define SCSPTR2 0xffe20010 /* 16 bit SCIF */
+# define SCSPTR3 0xffe30010 /* 16 bit SCIF */
+# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
+# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -145,7 +131,7 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
-# define SCIF_OPER 0x0001 /* Overrun error bit */
+# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#else
@@ -273,15 +259,6 @@
*/
#define SCI_EVENT_WRITE_WAKEUP 0
-struct sci_port {
- struct uart_port port;
- int type;
- unsigned char irqs[4]; /* ERI, RXI, TXI, BRI */
- void (*init_pins)(struct uart_port *port, unsigned int cflag);
- int break_flag;
- struct timer_list break_timer;
-};
-
#define SCI_IN(size, offset) \
unsigned int addr = port->mapbase + (offset); \
if ((size) == 8) { \
@@ -336,7 +313,9 @@
}
#ifdef CONFIG_CPU_SH3
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -362,7 +341,9 @@
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
SCIF_FNS(SCSCR, 0x08, 16)
@@ -447,7 +428,9 @@
return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xfffffe80)
@@ -467,6 +450,13 @@
return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == SCSPTR0)
+ return ctrl_inw(SCSPTR0 + 0x10) & 0x01 ? 1 : 0;
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH4_202)
@@ -504,6 +494,19 @@
{
return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7343)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffe10000)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffe20000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffe30000)
+ return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
static inline int sci_rxd_in(struct uart_port *port)
{
@@ -587,4 +590,3 @@
#else /* Generic SH */
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif
-
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 0050431..f9b1719 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -25,6 +25,7 @@
default y if PXA27x
default y if ARCH_EP93XX
default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
+ default y if ARCH_PNX4008
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 4710eb0..97d57cf 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
+obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_ETRAX_USB_HOST) += host/
obj-$(CONFIG_USB_OHCI_AT91) += host/
@@ -23,6 +24,7 @@
obj-$(CONFIG_USB_STORAGE) += storage/
obj-$(CONFIG_USB) += storage/
+obj-$(CONFIG_USB_ACECAD) += input/
obj-$(CONFIG_USB_AIPTEK) += input/
obj-$(CONFIG_USB_ATI_REMOTE) += input/
obj-$(CONFIG_USB_HID) += input/
@@ -31,8 +33,8 @@
obj-$(CONFIG_USB_MOUSE) += input/
obj-$(CONFIG_USB_MTOUCH) += input/
obj-$(CONFIG_USB_POWERMATE) += input/
+obj-$(CONFIG_USB_TRANCEVIBRATOR)+= input/
obj-$(CONFIG_USB_WACOM) += input/
-obj-$(CONFIG_USB_ACECAD) += input/
obj-$(CONFIG_USB_XPAD) += input/
obj-$(CONFIG_USB_CATC) += net/
@@ -47,22 +49,24 @@
obj-$(CONFIG_USB_SERIAL) += serial/
+obj-$(CONFIG_USB_ADUTUX) += misc/
+obj-$(CONFIG_USB_APPLEDISPLAY) += misc/
obj-$(CONFIG_USB_AUERSWALD) += misc/
obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
obj-$(CONFIG_USB_CYTHERM) += misc/
obj-$(CONFIG_USB_EMI26) += misc/
obj-$(CONFIG_USB_EMI62) += misc/
+obj-$(CONFIG_USB_FTDI_ELAN) += misc/
obj-$(CONFIG_USB_IDMOUSE) += misc/
obj-$(CONFIG_USB_LCD) += misc/
obj-$(CONFIG_USB_LD) += misc/
obj-$(CONFIG_USB_LED) += misc/
obj-$(CONFIG_USB_LEGOTOWER) += misc/
+obj-$(CONFIG_USB_PHIDGETSERVO) += misc/
obj-$(CONFIG_USB_RIO500) += misc/
+obj-$(CONFIG_USB_SISUSBVGA) += misc/
obj-$(CONFIG_USB_TEST) += misc/
obj-$(CONFIG_USB_USS720) += misc/
-obj-$(CONFIG_USB_PHIDGETSERVO) += misc/
-obj-$(CONFIG_USB_SISUSBVGA) += misc/
-obj-$(CONFIG_USB_APPLEDISPLAY) += misc/
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b38990a..465961a26 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1621,26 +1621,32 @@
return ret;
}
-static void create_fs_entries(struct uea_softc *sc, struct usb_interface *intf)
+static struct attribute *attrs[] = {
+ &dev_attr_stat_status.attr,
+ &dev_attr_stat_mflags.attr,
+ &dev_attr_stat_human_status.attr,
+ &dev_attr_stat_delin.attr,
+ &dev_attr_stat_vidcpe.attr,
+ &dev_attr_stat_usrate.attr,
+ &dev_attr_stat_dsrate.attr,
+ &dev_attr_stat_usattenuation.attr,
+ &dev_attr_stat_dsattenuation.attr,
+ &dev_attr_stat_usmargin.attr,
+ &dev_attr_stat_dsmargin.attr,
+ &dev_attr_stat_txflow.attr,
+ &dev_attr_stat_rxflow.attr,
+ &dev_attr_stat_uscorr.attr,
+ &dev_attr_stat_dscorr.attr,
+ &dev_attr_stat_usunc.attr,
+ &dev_attr_stat_dsunc.attr,
+};
+static struct attribute_group attr_grp = {
+ .attrs = attrs,
+};
+
+static int create_fs_entries(struct usb_interface *intf)
{
- /* sysfs interface */
- device_create_file(&intf->dev, &dev_attr_stat_status);
- device_create_file(&intf->dev, &dev_attr_stat_mflags);
- device_create_file(&intf->dev, &dev_attr_stat_human_status);
- device_create_file(&intf->dev, &dev_attr_stat_delin);
- device_create_file(&intf->dev, &dev_attr_stat_vidcpe);
- device_create_file(&intf->dev, &dev_attr_stat_usrate);
- device_create_file(&intf->dev, &dev_attr_stat_dsrate);
- device_create_file(&intf->dev, &dev_attr_stat_usattenuation);
- device_create_file(&intf->dev, &dev_attr_stat_dsattenuation);
- device_create_file(&intf->dev, &dev_attr_stat_usmargin);
- device_create_file(&intf->dev, &dev_attr_stat_dsmargin);
- device_create_file(&intf->dev, &dev_attr_stat_txflow);
- device_create_file(&intf->dev, &dev_attr_stat_rxflow);
- device_create_file(&intf->dev, &dev_attr_stat_uscorr);
- device_create_file(&intf->dev, &dev_attr_stat_dscorr);
- device_create_file(&intf->dev, &dev_attr_stat_usunc);
- device_create_file(&intf->dev, &dev_attr_stat_dsunc);
+ return sysfs_create_group(&intf->dev.kobj, &attr_grp);
}
static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
@@ -1708,37 +1714,25 @@
return ret;
}
- create_fs_entries(sc, intf);
+ ret = create_fs_entries(intf);
+ if (ret) {
+ uea_stop(sc);
+ kfree(sc);
+ return ret;
+ }
return 0;
}
-static void destroy_fs_entries(struct uea_softc *sc, struct usb_interface *intf)
+static void destroy_fs_entries(struct usb_interface *intf)
{
- /* sysfs interface */
- device_remove_file(&intf->dev, &dev_attr_stat_status);
- device_remove_file(&intf->dev, &dev_attr_stat_mflags);
- device_remove_file(&intf->dev, &dev_attr_stat_human_status);
- device_remove_file(&intf->dev, &dev_attr_stat_delin);
- device_remove_file(&intf->dev, &dev_attr_stat_vidcpe);
- device_remove_file(&intf->dev, &dev_attr_stat_usrate);
- device_remove_file(&intf->dev, &dev_attr_stat_dsrate);
- device_remove_file(&intf->dev, &dev_attr_stat_usattenuation);
- device_remove_file(&intf->dev, &dev_attr_stat_dsattenuation);
- device_remove_file(&intf->dev, &dev_attr_stat_usmargin);
- device_remove_file(&intf->dev, &dev_attr_stat_dsmargin);
- device_remove_file(&intf->dev, &dev_attr_stat_txflow);
- device_remove_file(&intf->dev, &dev_attr_stat_rxflow);
- device_remove_file(&intf->dev, &dev_attr_stat_uscorr);
- device_remove_file(&intf->dev, &dev_attr_stat_dscorr);
- device_remove_file(&intf->dev, &dev_attr_stat_usunc);
- device_remove_file(&intf->dev, &dev_attr_stat_dsunc);
+ sysfs_remove_group(&intf->dev.kobj, &attr_grp);
}
static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
{
struct uea_softc *sc = usbatm->driver_data;
- destroy_fs_entries(sc, intf);
+ destroy_fs_entries(intf);
uea_stop(sc);
kfree(sc);
}
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 48dee4b8..9cac11c 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -813,7 +813,7 @@
return 0;
}
-static struct file_operations usblp_fops = {
+static const struct file_operations usblp_fops = {
.owner = THIS_MODULE,
.read = usblp_read,
.write = usblp_write,
@@ -927,7 +927,9 @@
/* Retrieve and store the device ID string. */
usblp_cache_device_id_string(usblp);
- device_create_file(&intf->dev, &dev_attr_ieee1284_id);
+ retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id);
+ if (retval)
+ goto abort_intfdata;
#ifdef DEBUG
usblp_check_status(usblp, 0);
@@ -1021,18 +1023,13 @@
for (e = 0; e < ifd->desc.bNumEndpoints; e++) {
epd = &ifd->endpoint[e].desc;
- if ((epd->bmAttributes&USB_ENDPOINT_XFERTYPE_MASK)!=
- USB_ENDPOINT_XFER_BULK)
- continue;
-
- if (!(epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK)) {
+ if (usb_endpoint_is_bulk_out(epd))
if (!epwrite)
epwrite = epd;
- } else {
+ if (usb_endpoint_is_bulk_in(epd))
if (!epread)
epread = epd;
- }
}
/* Ignore buggy hardware without the right endpoints. */
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index ec51092..34e9bac 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -4,7 +4,7 @@
usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \
config.o file.o buffer.o sysfs.o endpoint.o \
- devio.o notify.o
+ devio.o notify.o generic.o
ifeq ($(CONFIG_PCI),y)
usbcore-objs += hcd-pci.o
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index f4f4ef0..840442a 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -104,7 +104,7 @@
dma_addr_t *dma
)
{
- struct usb_hcd *hcd = bus->hcpriv;
+ struct usb_hcd *hcd = bus_to_hcd(bus);
int i;
/* some USB hosts just use PIO */
@@ -127,7 +127,7 @@
dma_addr_t dma
)
{
- struct usb_hcd *hcd = bus->hcpriv;
+ struct usb_hcd *hcd = bus_to_hcd(bus);
int i;
if (!addr)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 4c9e63e..bfb3731 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -475,7 +475,9 @@
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s\n", cfgno, "start");
- goto err;
+ dev_err(ddev, "chopping to %d config(s)\n", cfgno);
+ dev->descriptor.bNumConfigurations = cfgno;
+ break;
} else if (result < 4) {
dev_err(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno,
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index c0f3734..3538c2f 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -593,7 +593,7 @@
/* Kernel lock for "lastev" protection */
static unsigned int usb_device_poll(struct file *file, struct poll_table_struct *wait)
{
- struct usb_device_status *st = (struct usb_device_status *)file->private_data;
+ struct usb_device_status *st = file->private_data;
unsigned int mask = 0;
lock_kernel();
@@ -603,7 +603,7 @@
unlock_kernel();
return POLLIN;
}
-
+
/* we may have dropped BKL - need to check for having lost the race */
if (file->private_data) {
kfree(st);
@@ -667,7 +667,7 @@
return ret;
}
-struct file_operations usbfs_devices_fops = {
+const struct file_operations usbfs_devices_fops = {
.llseek = usb_device_lseek,
.read = usb_device_read,
.poll = usb_device_poll,
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 218621b..a94c63b 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -59,6 +59,9 @@
#define USB_DEVICE_MAX USB_MAXBUS * 128
static struct class *usb_device_class;
+/* Mutual exclusion for removal, open, and release */
+DEFINE_MUTEX(usbfs_mutex);
+
struct async {
struct list_head asynclist;
struct dev_state *ps;
@@ -87,9 +90,10 @@
#define MAX_USBFS_BUFFER_SIZE 16384
-static inline int connected (struct usb_device *dev)
+static inline int connected (struct dev_state *ps)
{
- return dev->state != USB_STATE_NOTATTACHED;
+ return (!list_empty(&ps->list) &&
+ ps->dev->state != USB_STATE_NOTATTACHED);
}
static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig)
@@ -118,7 +122,7 @@
static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
{
- struct dev_state *ps = (struct dev_state *)file->private_data;
+ struct dev_state *ps = file->private_data;
struct usb_device *dev = ps->dev;
ssize_t ret = 0;
unsigned len;
@@ -127,7 +131,7 @@
pos = *ppos;
usb_lock_device(dev);
- if (!connected(dev)) {
+ if (!connected(ps)) {
ret = -ENODEV;
goto err;
} else if (pos < 0) {
@@ -301,7 +305,7 @@
static void async_completed(struct urb *urb, struct pt_regs *regs)
{
- struct async *as = (struct async *)urb->context;
+ struct async *as = urb->context;
struct dev_state *ps = as->ps;
struct siginfo sinfo;
@@ -541,25 +545,25 @@
struct dev_state *ps;
int ret;
- /*
- * no locking necessary here, as chrdev_open has the kernel lock
- * (still acquire the kernel lock for safety)
- */
+ /* Protect against simultaneous removal or release */
+ mutex_lock(&usbfs_mutex);
+
ret = -ENOMEM;
if (!(ps = kmalloc(sizeof(struct dev_state), GFP_KERNEL)))
- goto out_nolock;
+ goto out;
- lock_kernel();
ret = -ENOENT;
/* check if we are called from a real node or usbfs */
if (imajor(inode) == USB_DEVICE_MAJOR)
dev = usbdev_lookup_minor(iminor(inode));
if (!dev)
- dev = inode->u.generic_ip;
- if (!dev) {
- kfree(ps);
+ dev = inode->i_private;
+ if (!dev)
goto out;
- }
+ ret = usb_autoresume_device(dev, 1);
+ if (ret)
+ goto out;
+
usb_get_dev(dev);
ret = 0;
ps->dev = dev;
@@ -579,30 +583,36 @@
list_add_tail(&ps->list, &dev->filelist);
file->private_data = ps;
out:
- unlock_kernel();
- out_nolock:
- return ret;
+ if (ret)
+ kfree(ps);
+ mutex_unlock(&usbfs_mutex);
+ return ret;
}
static int usbdev_release(struct inode *inode, struct file *file)
{
- struct dev_state *ps = (struct dev_state *)file->private_data;
+ struct dev_state *ps = file->private_data;
struct usb_device *dev = ps->dev;
unsigned int ifnum;
usb_lock_device(dev);
+
+ /* Protect against simultaneous open */
+ mutex_lock(&usbfs_mutex);
list_del_init(&ps->list);
+ mutex_unlock(&usbfs_mutex);
+
for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed);
ifnum++) {
if (test_bit(ifnum, &ps->ifclaimed))
releaseintf(ps, ifnum);
}
destroy_all_async(ps);
+ usb_autosuspend_device(dev, 1);
usb_unlock_device(dev);
usb_put_dev(dev);
- ps->dev = NULL;
kfree(ps);
- return 0;
+ return 0;
}
static int proc_control(struct dev_state *ps, void __user *arg)
@@ -1322,7 +1332,7 @@
}
}
- if (!connected(ps->dev)) {
+ if (!connected(ps)) {
kfree(buf);
return -ENODEV;
}
@@ -1349,7 +1359,7 @@
/* let kernel drivers try to (re)bind to the interface */
case USBDEVFS_CONNECT:
usb_unlock_device(ps->dev);
- bus_rescan_devices(intf->dev.bus);
+ retval = bus_rescan_devices(intf->dev.bus);
usb_lock_device(ps->dev);
break;
@@ -1413,7 +1423,7 @@
*/
static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
- struct dev_state *ps = (struct dev_state *)file->private_data;
+ struct dev_state *ps = file->private_data;
struct usb_device *dev = ps->dev;
void __user *p = (void __user *)arg;
int ret = -ENOTTY;
@@ -1421,7 +1431,7 @@
if (!(file->f_mode & FMODE_WRITE))
return -EPERM;
usb_lock_device(dev);
- if (!connected(dev)) {
+ if (!connected(ps)) {
usb_unlock_device(dev);
return -ENODEV;
}
@@ -1556,18 +1566,18 @@
/* No kernel lock - fine */
static unsigned int usbdev_poll(struct file *file, struct poll_table_struct *wait)
{
- struct dev_state *ps = (struct dev_state *)file->private_data;
- unsigned int mask = 0;
+ struct dev_state *ps = file->private_data;
+ unsigned int mask = 0;
poll_wait(file, &ps->wait, wait);
if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed))
mask |= POLLOUT | POLLWRNORM;
- if (!connected(ps->dev))
+ if (!connected(ps))
mask |= POLLERR | POLLHUP;
return mask;
}
-struct file_operations usbfs_device_file_operations = {
+const struct file_operations usbfs_device_file_operations = {
.llseek = usbdev_lseek,
.read = usbdev_read,
.poll = usbdev_poll,
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ec89065..b104632 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -17,7 +17,8 @@
*
* NOTE! This is not actually a driver at all, rather this is
* just a collection of helper routines that implement the
- * generic USB things that the real drivers can use..
+ * matching, probing, releasing, suspending and resuming for
+ * real drivers.
*
*/
@@ -34,38 +35,6 @@
struct usb_device_id id;
};
-
-static int generic_probe(struct device *dev)
-{
- return 0;
-}
-static int generic_remove(struct device *dev)
-{
- struct usb_device *udev = to_usb_device(dev);
-
- /* if this is only an unbind, not a physical disconnect, then
- * unconfigure the device */
- if (udev->state == USB_STATE_CONFIGURED)
- usb_set_configuration(udev, 0);
-
- /* in case the call failed or the device was suspended */
- if (udev->state >= USB_STATE_CONFIGURED)
- usb_disable_device(udev, 0);
- return 0;
-}
-
-struct device_driver usb_generic_driver = {
- .owner = THIS_MODULE,
- .name = "usb",
- .bus = &usb_bus_type,
- .probe = generic_probe,
- .remove = generic_remove,
-};
-
-/* Fun hack to determine if the struct device is a
- * usb device or a usb interface. */
-int usb_generic_driver_data;
-
#ifdef CONFIG_HOTPLUG
/*
@@ -80,6 +49,7 @@
u32 idVendor = 0;
u32 idProduct = 0;
int fields = 0;
+ int retval = 0;
fields = sscanf(buf, "%x %x", &idVendor, &idProduct);
if (fields < 2)
@@ -99,10 +69,12 @@
spin_unlock(&usb_drv->dynids.lock);
if (get_driver(driver)) {
- driver_attach(driver);
+ retval = driver_attach(driver);
put_driver(driver);
}
+ if (retval)
+ return retval;
return count;
}
static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
@@ -115,7 +87,7 @@
goto exit;
if (usb_drv->probe != NULL)
- error = sysfs_create_file(&usb_drv->driver.kobj,
+ error = sysfs_create_file(&usb_drv->drvwrap.driver.kobj,
&driver_attr_new_id.attr);
exit:
return error;
@@ -127,7 +99,7 @@
return;
if (usb_drv->probe != NULL)
- sysfs_remove_file(&usb_drv->driver.kobj,
+ sysfs_remove_file(&usb_drv->drvwrap.driver.kobj,
&driver_attr_new_id.attr);
}
@@ -174,21 +146,57 @@
}
-/* called from driver core with usb_bus_type.subsys writelock */
+/* called from driver core with dev locked */
+static int usb_probe_device(struct device *dev)
+{
+ struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
+ struct usb_device *udev;
+ int error = -ENODEV;
+
+ dev_dbg(dev, "%s\n", __FUNCTION__);
+
+ if (!is_usb_device(dev)) /* Sanity check */
+ return error;
+
+ udev = to_usb_device(dev);
+
+ /* TODO: Add real matching code */
+
+ /* The device should always appear to be in use
+ * unless the driver suports autosuspend.
+ */
+ udev->pm_usage_cnt = !(udriver->supports_autosuspend);
+
+ error = udriver->probe(udev);
+ return error;
+}
+
+/* called from driver core with dev locked */
+static int usb_unbind_device(struct device *dev)
+{
+ struct usb_device_driver *udriver = to_usb_device_driver(dev->driver);
+
+ udriver->disconnect(to_usb_device(dev));
+ return 0;
+}
+
+
+/* called from driver core with dev locked */
static int usb_probe_interface(struct device *dev)
{
- struct usb_interface * intf = to_usb_interface(dev);
- struct usb_driver * driver = to_usb_driver(dev->driver);
+ struct usb_driver *driver = to_usb_driver(dev->driver);
+ struct usb_interface *intf;
+ struct usb_device *udev;
const struct usb_device_id *id;
int error = -ENODEV;
dev_dbg(dev, "%s\n", __FUNCTION__);
- if (!driver->probe)
+ if (is_usb_device(dev)) /* Sanity check */
return error;
- /* FIXME we'd much prefer to just resume it ... */
- if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED)
- return -EHOSTUNREACH;
+
+ intf = to_usb_interface(dev);
+ udev = interface_to_usbdev(intf);
id = usb_match_id(intf, driver->id_table);
if (!id)
@@ -196,48 +204,165 @@
if (id) {
dev_dbg(dev, "%s - got id\n", __FUNCTION__);
+ error = usb_autoresume_device(udev, 1);
+ if (error)
+ return error;
+
/* Interface "power state" doesn't correspond to any hardware
* state whatsoever. We use it to record when it's bound to
* a driver that may start I/0: it's not frozen/quiesced.
*/
mark_active(intf);
intf->condition = USB_INTERFACE_BINDING;
+
+ /* The interface should always appear to be in use
+ * unless the driver suports autosuspend.
+ */
+ intf->pm_usage_cnt = !(driver->supports_autosuspend);
+
error = driver->probe(intf, id);
if (error) {
mark_quiesced(intf);
+ intf->needs_remote_wakeup = 0;
intf->condition = USB_INTERFACE_UNBOUND;
} else
intf->condition = USB_INTERFACE_BOUND;
+
+ usb_autosuspend_device(udev, 1);
}
return error;
}
-/* called from driver core with usb_bus_type.subsys writelock */
+/* called from driver core with dev locked */
static int usb_unbind_interface(struct device *dev)
{
+ struct usb_driver *driver = to_usb_driver(dev->driver);
struct usb_interface *intf = to_usb_interface(dev);
- struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+ struct usb_device *udev;
+ int error;
intf->condition = USB_INTERFACE_UNBINDING;
+ /* Autoresume for set_interface call below */
+ udev = interface_to_usbdev(intf);
+ error = usb_autoresume_device(udev, 1);
+
/* release all urbs for this interface */
usb_disable_interface(interface_to_usbdev(intf), intf);
- if (driver && driver->disconnect)
- driver->disconnect(intf);
+ driver->disconnect(intf);
/* reset other interface state */
usb_set_interface(interface_to_usbdev(intf),
intf->altsetting[0].desc.bInterfaceNumber,
0);
usb_set_intfdata(intf, NULL);
+
intf->condition = USB_INTERFACE_UNBOUND;
mark_quiesced(intf);
+ intf->needs_remote_wakeup = 0;
+
+ if (!error)
+ usb_autosuspend_device(udev, 1);
return 0;
}
+/**
+ * usb_driver_claim_interface - bind a driver to an interface
+ * @driver: the driver to be bound
+ * @iface: the interface to which it will be bound; must be in the
+ * usb device's active configuration
+ * @priv: driver data associated with that interface
+ *
+ * This is used by usb device drivers that need to claim more than one
+ * interface on a device when probing (audio and acm are current examples).
+ * No device driver should directly modify internal usb_interface or
+ * usb_device structure members.
+ *
+ * Few drivers should need to use this routine, since the most natural
+ * way to bind to an interface is to return the private data from
+ * the driver's probe() method.
+ *
+ * Callers must own the device lock and the driver model's usb_bus_type.subsys
+ * writelock. So driver probe() entries don't need extra locking,
+ * but other call contexts may need to explicitly claim those locks.
+ */
+int usb_driver_claim_interface(struct usb_driver *driver,
+ struct usb_interface *iface, void* priv)
+{
+ struct device *dev = &iface->dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
+ int retval = 0;
+
+ if (dev->driver)
+ return -EBUSY;
+
+ dev->driver = &driver->drvwrap.driver;
+ usb_set_intfdata(iface, priv);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ iface->condition = USB_INTERFACE_BOUND;
+ mark_active(iface);
+ iface->pm_usage_cnt = !(driver->supports_autosuspend);
+ mutex_unlock(&udev->pm_mutex);
+
+ /* if interface was already added, bind now; else let
+ * the future device_add() bind it, bypassing probe()
+ */
+ if (device_is_registered(dev))
+ retval = device_bind_driver(dev);
+
+ return retval;
+}
+EXPORT_SYMBOL(usb_driver_claim_interface);
+
+/**
+ * usb_driver_release_interface - unbind a driver from an interface
+ * @driver: the driver to be unbound
+ * @iface: the interface from which it will be unbound
+ *
+ * This can be used by drivers to release an interface without waiting
+ * for their disconnect() methods to be called. In typical cases this
+ * also causes the driver disconnect() method to be called.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ * Callers must own the device lock and the driver model's usb_bus_type.subsys
+ * writelock. So driver disconnect() entries don't need extra locking,
+ * but other call contexts may need to explicitly claim those locks.
+ */
+void usb_driver_release_interface(struct usb_driver *driver,
+ struct usb_interface *iface)
+{
+ struct device *dev = &iface->dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
+
+ /* this should never happen, don't release something that's not ours */
+ if (!dev->driver || dev->driver != &driver->drvwrap.driver)
+ return;
+
+ /* don't release from within disconnect() */
+ if (iface->condition != USB_INTERFACE_BOUND)
+ return;
+
+ /* don't release if the interface hasn't been added yet */
+ if (device_is_registered(dev)) {
+ iface->condition = USB_INTERFACE_UNBINDING;
+ device_release_driver(dev);
+ }
+
+ dev->driver = NULL;
+ usb_set_intfdata(iface, NULL);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ iface->condition = USB_INTERFACE_UNBOUND;
+ mark_quiesced(iface);
+ iface->needs_remote_wakeup = 0;
+ mutex_unlock(&udev->pm_mutex);
+}
+EXPORT_SYMBOL(usb_driver_release_interface);
+
/* returns 0 if no match, 1 if match */
static int usb_match_one_id(struct usb_interface *interface,
const struct usb_device_id *id)
@@ -381,35 +506,223 @@
int usb_device_match(struct device *dev, struct device_driver *drv)
{
- struct usb_interface *intf;
- struct usb_driver *usb_drv;
- const struct usb_device_id *id;
+ /* devices and interfaces are handled separately */
+ if (is_usb_device(dev)) {
- /* check for generic driver, which we don't match any device with */
- if (drv == &usb_generic_driver)
- return 0;
+ /* interface drivers never match devices */
+ if (!is_usb_device_driver(drv))
+ return 0;
- intf = to_usb_interface(dev);
- usb_drv = to_usb_driver(drv);
-
- id = usb_match_id(intf, usb_drv->id_table);
- if (id)
+ /* TODO: Add real matching code */
return 1;
- id = usb_match_dynamic_id(intf, usb_drv);
- if (id)
- return 1;
+ } else {
+ struct usb_interface *intf;
+ struct usb_driver *usb_drv;
+ const struct usb_device_id *id;
+
+ /* device drivers never match interfaces */
+ if (is_usb_device_driver(drv))
+ return 0;
+
+ intf = to_usb_interface(dev);
+ usb_drv = to_usb_driver(drv);
+
+ id = usb_match_id(intf, usb_drv->id_table);
+ if (id)
+ return 1;
+
+ id = usb_match_dynamic_id(intf, usb_drv);
+ if (id)
+ return 1;
+ }
+
return 0;
}
+#ifdef CONFIG_HOTPLUG
+
+/*
+ * This sends an uevent to userspace, typically helping to load driver
+ * or other modules, configure the device, and more. Drivers can provide
+ * a MODULE_DEVICE_TABLE to help with module loading subtasks.
+ *
+ * We're called either from khubd (the typical case) or from root hub
+ * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle
+ * delays in event delivery. Use sysfs (and DEVPATH) to make sure the
+ * device (and this configuration!) are still present.
+ */
+static int usb_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct usb_interface *intf;
+ struct usb_device *usb_dev;
+ struct usb_host_interface *alt;
+ int i = 0;
+ int length = 0;
+
+ if (!dev)
+ return -ENODEV;
+
+ /* driver is often null here; dev_dbg() would oops */
+ pr_debug ("usb %s: uevent\n", dev->bus_id);
+
+ if (is_usb_device(dev)) {
+ usb_dev = to_usb_device(dev);
+ alt = NULL;
+ } else {
+ intf = to_usb_interface(dev);
+ usb_dev = interface_to_usbdev(intf);
+ alt = intf->cur_altsetting;
+ }
+
+ if (usb_dev->devnum < 0) {
+ pr_debug ("usb %s: already deleted?\n", dev->bus_id);
+ return -ENODEV;
+ }
+ if (!usb_dev->bus) {
+ pr_debug ("usb %s: bus removed?\n", dev->bus_id);
+ return -ENODEV;
+ }
+
+#ifdef CONFIG_USB_DEVICEFS
+ /* If this is available, userspace programs can directly read
+ * all the device descriptors we don't tell them about. Or
+ * even act as usermode drivers.
+ *
+ * FIXME reduce hardwired intelligence here
+ */
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "DEVICE=/proc/bus/usb/%03d/%03d",
+ usb_dev->bus->busnum, usb_dev->devnum))
+ return -ENOMEM;
+#endif
+
+ /* per-device configurations are common */
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "PRODUCT=%x/%x/%x",
+ le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct),
+ le16_to_cpu(usb_dev->descriptor.bcdDevice)))
+ return -ENOMEM;
+
+ /* class-based driver binding models */
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "TYPE=%d/%d/%d",
+ usb_dev->descriptor.bDeviceClass,
+ usb_dev->descriptor.bDeviceSubClass,
+ usb_dev->descriptor.bDeviceProtocol))
+ return -ENOMEM;
+
+ if (!is_usb_device(dev)) {
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "INTERFACE=%d/%d/%d",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct),
+ le16_to_cpu(usb_dev->descriptor.bcdDevice),
+ usb_dev->descriptor.bDeviceClass,
+ usb_dev->descriptor.bDeviceSubClass,
+ usb_dev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
+ }
+
+ envp[i] = NULL;
+
+ return 0;
+}
+
+#else
+
+static int usb_uevent(struct device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_HOTPLUG */
+
/**
- * usb_register_driver - register a USB driver
- * @new_driver: USB operations for the driver
+ * usb_register_device_driver - register a USB device (not interface) driver
+ * @new_udriver: USB operations for the device driver
* @owner: module owner of this driver.
*
- * Registers a USB driver with the USB core. The list of unattached
- * interfaces will be rescanned whenever a new driver is added, allowing
- * the new driver to attach to any recognized devices.
+ * Registers a USB device driver with the USB core. The list of
+ * unattached devices will be rescanned whenever a new driver is
+ * added, allowing the new driver to attach to any recognized devices.
+ * Returns a negative error code on failure and 0 on success.
+ */
+int usb_register_device_driver(struct usb_device_driver *new_udriver,
+ struct module *owner)
+{
+ int retval = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ new_udriver->drvwrap.for_devices = 1;
+ new_udriver->drvwrap.driver.name = (char *) new_udriver->name;
+ new_udriver->drvwrap.driver.bus = &usb_bus_type;
+ new_udriver->drvwrap.driver.probe = usb_probe_device;
+ new_udriver->drvwrap.driver.remove = usb_unbind_device;
+ new_udriver->drvwrap.driver.owner = owner;
+
+ retval = driver_register(&new_udriver->drvwrap.driver);
+
+ if (!retval) {
+ pr_info("%s: registered new device driver %s\n",
+ usbcore_name, new_udriver->name);
+ usbfs_update_special();
+ } else {
+ printk(KERN_ERR "%s: error %d registering device "
+ " driver %s\n",
+ usbcore_name, retval, new_udriver->name);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(usb_register_device_driver);
+
+/**
+ * usb_deregister_device_driver - unregister a USB device (not interface) driver
+ * @udriver: USB operations of the device driver to unregister
+ * Context: must be able to sleep
+ *
+ * Unlinks the specified driver from the internal USB driver list.
+ */
+void usb_deregister_device_driver(struct usb_device_driver *udriver)
+{
+ pr_info("%s: deregistering device driver %s\n",
+ usbcore_name, udriver->name);
+
+ driver_unregister(&udriver->drvwrap.driver);
+ usbfs_update_special();
+}
+EXPORT_SYMBOL_GPL(usb_deregister_device_driver);
+
+/**
+ * usb_register_driver - register a USB interface driver
+ * @new_driver: USB operations for the interface driver
+ * @owner: module owner of this driver.
+ *
+ * Registers a USB interface driver with the USB core. The list of
+ * unattached interfaces will be rescanned whenever a new driver is
+ * added, allowing the new driver to attach to any recognized interfaces.
* Returns a negative error code on failure and 0 on success.
*
* NOTE: if you want your driver to use the USB major number, you must call
@@ -423,23 +736,25 @@
if (usb_disabled())
return -ENODEV;
- new_driver->driver.name = (char *)new_driver->name;
- new_driver->driver.bus = &usb_bus_type;
- new_driver->driver.probe = usb_probe_interface;
- new_driver->driver.remove = usb_unbind_interface;
- new_driver->driver.owner = owner;
+ new_driver->drvwrap.for_devices = 0;
+ new_driver->drvwrap.driver.name = (char *) new_driver->name;
+ new_driver->drvwrap.driver.bus = &usb_bus_type;
+ new_driver->drvwrap.driver.probe = usb_probe_interface;
+ new_driver->drvwrap.driver.remove = usb_unbind_interface;
+ new_driver->drvwrap.driver.owner = owner;
spin_lock_init(&new_driver->dynids.lock);
INIT_LIST_HEAD(&new_driver->dynids.list);
- retval = driver_register(&new_driver->driver);
+ retval = driver_register(&new_driver->drvwrap.driver);
if (!retval) {
- pr_info("%s: registered new driver %s\n",
+ pr_info("%s: registered new interface driver %s\n",
usbcore_name, new_driver->name);
usbfs_update_special();
usb_create_newid_file(new_driver);
} else {
- printk(KERN_ERR "%s: error %d registering driver %s\n",
+ printk(KERN_ERR "%s: error %d registering interface "
+ " driver %s\n",
usbcore_name, retval, new_driver->name);
}
@@ -448,8 +763,8 @@
EXPORT_SYMBOL_GPL_FUTURE(usb_register_driver);
/**
- * usb_deregister - unregister a USB driver
- * @driver: USB operations of the driver to unregister
+ * usb_deregister - unregister a USB interface driver
+ * @driver: USB operations of the interface driver to unregister
* Context: must be able to sleep
*
* Unlinks the specified driver from the internal USB driver list.
@@ -460,12 +775,554 @@
*/
void usb_deregister(struct usb_driver *driver)
{
- pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name);
+ pr_info("%s: deregistering interface driver %s\n",
+ usbcore_name, driver->name);
usb_remove_newid_file(driver);
usb_free_dynids(driver);
- driver_unregister(&driver->driver);
+ driver_unregister(&driver->drvwrap.driver);
usbfs_update_special();
}
EXPORT_SYMBOL_GPL_FUTURE(usb_deregister);
+
+#ifdef CONFIG_PM
+
+/* Caller has locked udev->pm_mutex */
+static int suspend_device(struct usb_device *udev, pm_message_t msg)
+{
+ struct usb_device_driver *udriver;
+ int status = 0;
+
+ if (udev->state == USB_STATE_NOTATTACHED ||
+ udev->state == USB_STATE_SUSPENDED)
+ goto done;
+
+ /* For devices that don't have a driver, we do a standard suspend. */
+ if (udev->dev.driver == NULL) {
+ udev->do_remote_wakeup = 0;
+ status = usb_port_suspend(udev);
+ goto done;
+ }
+
+ udriver = to_usb_device_driver(udev->dev.driver);
+ status = udriver->suspend(udev, msg);
+
+done:
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ if (status == 0)
+ udev->dev.power.power_state.event = msg.event;
+ return status;
+}
+
+/* Caller has locked udev->pm_mutex */
+static int resume_device(struct usb_device *udev)
+{
+ struct usb_device_driver *udriver;
+ int status = 0;
+
+ if (udev->state == USB_STATE_NOTATTACHED ||
+ udev->state != USB_STATE_SUSPENDED)
+ goto done;
+
+ /* Can't resume it if it doesn't have a driver. */
+ if (udev->dev.driver == NULL) {
+ status = -ENOTCONN;
+ goto done;
+ }
+
+ udriver = to_usb_device_driver(udev->dev.driver);
+ status = udriver->resume(udev);
+
+done:
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ if (status == 0)
+ udev->dev.power.power_state.event = PM_EVENT_ON;
+ return status;
+}
+
+/* Caller has locked intf's usb_device's pm_mutex */
+static int suspend_interface(struct usb_interface *intf, pm_message_t msg)
+{
+ struct usb_driver *driver;
+ int status = 0;
+
+ /* with no hardware, USB interfaces only use FREEZE and ON states */
+ if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
+ !is_active(intf))
+ goto done;
+
+ if (intf->condition == USB_INTERFACE_UNBOUND) /* This can't happen */
+ goto done;
+ driver = to_usb_driver(intf->dev.driver);
+
+ if (driver->suspend && driver->resume) {
+ status = driver->suspend(intf, msg);
+ if (status == 0)
+ mark_quiesced(intf);
+ else if (!interface_to_usbdev(intf)->auto_pm)
+ dev_err(&intf->dev, "%s error %d\n",
+ "suspend", status);
+ } else {
+ // FIXME else if there's no suspend method, disconnect...
+ // Not possible if auto_pm is set...
+ dev_warn(&intf->dev, "no suspend for driver %s?\n",
+ driver->name);
+ mark_quiesced(intf);
+ }
+
+done:
+ // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
+ if (status == 0)
+ intf->dev.power.power_state.event = msg.event;
+ return status;
+}
+
+/* Caller has locked intf's usb_device's pm_mutex */
+static int resume_interface(struct usb_interface *intf)
+{
+ struct usb_driver *driver;
+ int status = 0;
+
+ if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
+ is_active(intf))
+ goto done;
+
+ /* Don't let autoresume interfere with unbinding */
+ if (intf->condition == USB_INTERFACE_UNBINDING)
+ goto done;
+
+ /* Can't resume it if it doesn't have a driver. */
+ if (intf->condition == USB_INTERFACE_UNBOUND) {
+ status = -ENOTCONN;
+ goto done;
+ }
+ driver = to_usb_driver(intf->dev.driver);
+
+ if (driver->resume) {
+ status = driver->resume(intf);
+ if (status)
+ dev_err(&intf->dev, "%s error %d\n",
+ "resume", status);
+ else
+ mark_active(intf);
+ } else {
+ dev_warn(&intf->dev, "no resume for driver %s?\n",
+ driver->name);
+ mark_active(intf);
+ }
+
+done:
+ // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
+ if (status == 0)
+ intf->dev.power.power_state.event = PM_EVENT_ON;
+ return status;
+}
+
+/**
+ * usb_suspend_both - suspend a USB device and its interfaces
+ * @udev: the usb_device to suspend
+ * @msg: Power Management message describing this state transition
+ *
+ * This is the central routine for suspending USB devices. It calls the
+ * suspend methods for all the interface drivers in @udev and then calls
+ * the suspend method for @udev itself. If an error occurs at any stage,
+ * all the interfaces which were suspended are resumed so that they remain
+ * in the same state as the device.
+ *
+ * If an autosuspend is in progress (@udev->auto_pm is set), the routine
+ * checks first to make sure that neither the device itself or any of its
+ * active interfaces is in use (pm_usage_cnt is greater than 0). If they
+ * are, the autosuspend fails.
+ *
+ * If the suspend succeeds, the routine recursively queues an autosuspend
+ * request for @udev's parent device, thereby propagating the change up
+ * the device tree. If all of the parent's children are now suspended,
+ * the parent will autosuspend in turn.
+ *
+ * The suspend method calls are subject to mutual exclusion under control
+ * of @udev's pm_mutex. Many of these calls are also under the protection
+ * of @udev's device lock (including all requests originating outside the
+ * USB subsystem), but autosuspend requests generated by a child device or
+ * interface driver may not be. Usbcore will insure that the method calls
+ * do not arrive during bind, unbind, or reset operations. However, drivers
+ * must be prepared to handle suspend calls arriving at unpredictable times.
+ * The only way to block such calls is to do an autoresume (preventing
+ * autosuspends) while holding @udev's device lock (preventing outside
+ * suspends).
+ *
+ * The caller must hold @udev->pm_mutex.
+ *
+ * This routine can run only in process context.
+ */
+int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
+{
+ int status = 0;
+ int i = 0;
+ struct usb_interface *intf;
+ struct usb_device *parent = udev->parent;
+
+ cancel_delayed_work(&udev->autosuspend);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return 0;
+ if (udev->state == USB_STATE_SUSPENDED)
+ return 0;
+
+ udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+
+ /* For autosuspend, fail fast if anything is in use.
+ * Also fail if any interfaces require remote wakeup but it
+ * isn't available. */
+ if (udev->auto_pm) {
+ if (udev->pm_usage_cnt > 0)
+ return -EBUSY;
+ if (udev->actconfig) {
+ for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ if (!is_active(intf))
+ continue;
+ if (intf->pm_usage_cnt > 0)
+ return -EBUSY;
+ if (intf->needs_remote_wakeup &&
+ !udev->do_remote_wakeup) {
+ dev_dbg(&udev->dev,
+ "remote wakeup needed for autosuspend\n");
+ return -EOPNOTSUPP;
+ }
+ }
+ i = 0;
+ }
+ }
+
+ /* Suspend all the interfaces and then udev itself */
+ if (udev->actconfig) {
+ for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ status = suspend_interface(intf, msg);
+ if (status != 0)
+ break;
+ }
+ }
+ if (status == 0)
+ status = suspend_device(udev, msg);
+
+ /* If the suspend failed, resume interfaces that did get suspended */
+ if (status != 0) {
+ while (--i >= 0) {
+ intf = udev->actconfig->interface[i];
+ resume_interface(intf);
+ }
+
+ /* If the suspend succeeded, propagate it up the tree */
+ } else if (parent)
+ usb_autosuspend_device(parent, 0);
+
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ return status;
+}
+
+/**
+ * usb_resume_both - resume a USB device and its interfaces
+ * @udev: the usb_device to resume
+ *
+ * This is the central routine for resuming USB devices. It calls the
+ * the resume method for @udev and then calls the resume methods for all
+ * the interface drivers in @udev.
+ *
+ * Before starting the resume, the routine calls itself recursively for
+ * the parent device of @udev, thereby propagating the change up the device
+ * tree and assuring that @udev will be able to resume. If the parent is
+ * unable to resume successfully, the routine fails.
+ *
+ * The resume method calls are subject to mutual exclusion under control
+ * of @udev's pm_mutex. Many of these calls are also under the protection
+ * of @udev's device lock (including all requests originating outside the
+ * USB subsystem), but autoresume requests generated by a child device or
+ * interface driver may not be. Usbcore will insure that the method calls
+ * do not arrive during bind, unbind, or reset operations. However, drivers
+ * must be prepared to handle resume calls arriving at unpredictable times.
+ * The only way to block such calls is to do an autoresume (preventing
+ * other autoresumes) while holding @udev's device lock (preventing outside
+ * resumes).
+ *
+ * The caller must hold @udev->pm_mutex.
+ *
+ * This routine can run only in process context.
+ */
+int usb_resume_both(struct usb_device *udev)
+{
+ int status = 0;
+ int i;
+ struct usb_interface *intf;
+ struct usb_device *parent = udev->parent;
+
+ cancel_delayed_work(&udev->autosuspend);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return -ENODEV;
+
+ /* Propagate the resume up the tree, if necessary */
+ if (udev->state == USB_STATE_SUSPENDED) {
+ if (parent) {
+ mutex_lock_nested(&parent->pm_mutex, parent->level);
+ parent->auto_pm = 1;
+ status = usb_resume_both(parent);
+ } else {
+
+ /* We can't progagate beyond the USB subsystem,
+ * so if a root hub's controller is suspended
+ * then we're stuck. */
+ if (udev->dev.parent->power.power_state.event !=
+ PM_EVENT_ON)
+ status = -EHOSTUNREACH;
+ }
+ if (status == 0)
+ status = resume_device(udev);
+ if (parent)
+ mutex_unlock(&parent->pm_mutex);
+ } else {
+
+ /* Needed only for setting udev->dev.power.power_state.event
+ * and for possible debugging message. */
+ status = resume_device(udev);
+ }
+
+ /* Now the parent won't suspend until we are finished */
+
+ if (status == 0 && udev->actconfig) {
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ resume_interface(intf);
+ }
+ }
+
+ // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ return status;
+}
+
+#ifdef CONFIG_USB_SUSPEND
+
+/**
+ * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
+ * @udev - the usb_device to autosuspend
+ * @dec_usage_cnt - flag to decrement @udev's PM-usage counter
+ *
+ * This routine should be called when a core subsystem is finished using
+ * @udev and wants to allow it to autosuspend. Examples would be when
+ * @udev's device file in usbfs is closed or after a configuration change.
+ *
+ * @dec_usage_cnt should be 1 if the subsystem previously incremented
+ * @udev's usage counter (such as by passing 1 to usb_autoresume_device);
+ * otherwise it should be 0.
+ *
+ * If the usage counter for @udev or any of its active interfaces is greater
+ * than 0, the autosuspend request will not be queued. (If an interface
+ * driver does not support autosuspend then its usage counter is permanently
+ * positive.) Likewise, if an interface driver requires remote-wakeup
+ * capability during autosuspend but remote wakeup is disabled, the
+ * autosuspend will fail.
+ *
+ * Often the caller will hold @udev's device lock, but this is not
+ * necessary.
+ *
+ * This routine can run only in process context.
+ */
+void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt)
+{
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->pm_usage_cnt -= dec_usage_cnt;
+ if (udev->pm_usage_cnt <= 0)
+ schedule_delayed_work(&udev->autosuspend,
+ USB_AUTOSUSPEND_DELAY);
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&udev->dev, "%s: cnt %d\n",
+ // __FUNCTION__, udev->pm_usage_cnt);
+}
+
+/**
+ * usb_autoresume_device - immediately autoresume a USB device and its interfaces
+ * @udev - the usb_device to autoresume
+ * @inc_usage_cnt - flag to increment @udev's PM-usage counter
+ *
+ * This routine should be called when a core subsystem wants to use @udev
+ * and needs to guarantee that it is not suspended. In addition, the
+ * caller can prevent @udev from being autosuspended subsequently. (Note
+ * that this will not prevent suspend events originating in the PM core.)
+ * Examples would be when @udev's device file in usbfs is opened (autosuspend
+ * should be prevented until the file is closed) or when a remote-wakeup
+ * request is received (later autosuspends should not be prevented).
+ *
+ * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent
+ * autosuspends. This prevention will persist until the usage counter is
+ * decremented again (such as by passing 1 to usb_autosuspend_device).
+ * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged.
+ * Regardless, if the autoresume fails then the usage counter is not
+ * incremented.
+ *
+ * Often the caller will hold @udev's device lock, but this is not
+ * necessary (and attempting it might cause deadlock).
+ *
+ * This routine can run only in process context.
+ */
+int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt)
+{
+ int status;
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->pm_usage_cnt += inc_usage_cnt;
+ udev->auto_pm = 1;
+ status = usb_resume_both(udev);
+ if (status != 0)
+ udev->pm_usage_cnt -= inc_usage_cnt;
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&udev->dev, "%s: status %d cnt %d\n",
+ // __FUNCTION__, status, udev->pm_usage_cnt);
+ return status;
+}
+
+/**
+ * usb_autopm_put_interface - decrement a USB interface's PM-usage counter
+ * @intf - the usb_interface whose counter should be decremented
+ *
+ * This routine should be called by an interface driver when it is
+ * finished using @intf and wants to allow it to autosuspend. A typical
+ * example would be a character-device driver when its device file is
+ * closed.
+ *
+ * The routine decrements @intf's usage counter. When the counter reaches
+ * 0, a delayed autosuspend request for @intf's device is queued. When
+ * the delay expires, if @intf->pm_usage_cnt is still <= 0 along with all
+ * the other usage counters for the sibling interfaces and @intf's
+ * usb_device, the device and all its interfaces will be autosuspended.
+ *
+ * Note that @intf->pm_usage_cnt is owned by the interface driver. The
+ * core will not change its value other than the increment and decrement
+ * in usb_autopm_get_interface and usb_autopm_put_interface. The driver
+ * may use this simple counter-oriented discipline or may set the value
+ * any way it likes.
+ *
+ * If the driver has set @intf->needs_remote_wakeup then autosuspend will
+ * take place only if the device's remote-wakeup facility is enabled.
+ *
+ * Suspend method calls queued by this routine can arrive at any time
+ * while @intf is resumed and its usage counter is equal to 0. They are
+ * not protected by the usb_device's lock but only by its pm_mutex.
+ * Drivers must provide their own synchronization.
+ *
+ * This routine can run only in process context.
+ */
+void usb_autopm_put_interface(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ if (intf->condition != USB_INTERFACE_UNBOUND) {
+ if (--intf->pm_usage_cnt <= 0)
+ schedule_delayed_work(&udev->autosuspend,
+ USB_AUTOSUSPEND_DELAY);
+ }
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&intf->dev, "%s: cnt %d\n",
+ // __FUNCTION__, intf->pm_usage_cnt);
+}
+EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
+
+/**
+ * usb_autopm_get_interface - increment a USB interface's PM-usage counter
+ * @intf - the usb_interface whose counter should be incremented
+ *
+ * This routine should be called by an interface driver when it wants to
+ * use @intf and needs to guarantee that it is not suspended. In addition,
+ * the routine prevents @intf from being autosuspended subsequently. (Note
+ * that this will not prevent suspend events originating in the PM core.)
+ * This prevention will persist until usb_autopm_put_interface() is called
+ * or @intf is unbound. A typical example would be a character-device
+ * driver when its device file is opened.
+ *
+ * The routine increments @intf's usage counter. So long as the counter
+ * is greater than 0, autosuspend will not be allowed for @intf or its
+ * usb_device. When the driver is finished using @intf it should call
+ * usb_autopm_put_interface() to decrement the usage counter and queue
+ * a delayed autosuspend request (if the counter is <= 0).
+ *
+ * Note that @intf->pm_usage_cnt is owned by the interface driver. The
+ * core will not change its value other than the increment and decrement
+ * in usb_autopm_get_interface and usb_autopm_put_interface. The driver
+ * may use this simple counter-oriented discipline or may set the value
+ * any way it likes.
+ *
+ * Resume method calls generated by this routine can arrive at any time
+ * while @intf is suspended. They are not protected by the usb_device's
+ * lock but only by its pm_mutex. Drivers must provide their own
+ * synchronization.
+ *
+ * This routine can run only in process context.
+ */
+int usb_autopm_get_interface(struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ int status;
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ if (intf->condition == USB_INTERFACE_UNBOUND)
+ status = -ENODEV;
+ else {
+ ++intf->pm_usage_cnt;
+ udev->auto_pm = 1;
+ status = usb_resume_both(udev);
+ if (status != 0)
+ --intf->pm_usage_cnt;
+ }
+ mutex_unlock(&udev->pm_mutex);
+ // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
+ // __FUNCTION__, status, intf->pm_usage_cnt);
+ return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
+
+#endif /* CONFIG_USB_SUSPEND */
+
+static int usb_suspend(struct device *dev, pm_message_t message)
+{
+ int status;
+
+ if (is_usb_device(dev)) {
+ struct usb_device *udev = to_usb_device(dev);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->auto_pm = 0;
+ status = usb_suspend_both(udev, message);
+ mutex_unlock(&udev->pm_mutex);
+ } else
+ status = 0;
+ return status;
+}
+
+static int usb_resume(struct device *dev)
+{
+ int status;
+
+ if (is_usb_device(dev)) {
+ struct usb_device *udev = to_usb_device(dev);
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->auto_pm = 0;
+ status = usb_resume_both(udev);
+ mutex_unlock(&udev->pm_mutex);
+
+ /* Rebind drivers that had no suspend method? */
+ } else
+ status = 0;
+ return status;
+}
+
+#endif /* CONFIG_PM */
+
+struct bus_type usb_bus_type = {
+ .name = "usb",
+ .match = usb_device_match,
+ .uevent = usb_uevent,
+#ifdef CONFIG_PM
+ .suspend = usb_suspend,
+ .resume = usb_resume,
+#endif
+};
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 247b5a4..3ebb901 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -207,9 +207,9 @@
kfree(ep_dev);
}
-void usb_create_ep_files(struct device *parent,
- struct usb_host_endpoint *endpoint,
- struct usb_device *udev)
+int usb_create_ep_files(struct device *parent,
+ struct usb_host_endpoint *endpoint,
+ struct usb_device *udev)
{
char name[8];
struct ep_device *ep_dev;
@@ -242,19 +242,33 @@
retval = device_register(&ep_dev->dev);
if (retval)
goto error;
- sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
+ retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
+ if (retval)
+ goto error_group;
endpoint->ep_dev = ep_dev;
/* create the symlink to the old-style "ep_XX" directory */
sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
- sysfs_create_link(&parent->kobj, &endpoint->ep_dev->dev.kobj, name);
-
+ retval = sysfs_create_link(&parent->kobj,
+ &endpoint->ep_dev->dev.kobj, name);
+ if (retval)
+ goto error_link;
exit:
- return;
+ return retval;
+
+error_link:
+ sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
+
+error_group:
+ device_unregister(&ep_dev->dev);
+ endpoint->ep_dev = NULL;
+ destroy_endpoint_class();
+ return retval;
error:
kfree(ep_dev);
- return;
+ destroy_endpoint_class();
+ return retval;
}
void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 8de4f8c..c376c65 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -55,7 +55,7 @@
return err;
}
-static struct file_operations usb_fops = {
+static const struct file_operations usb_fops = {
.owner = THIS_MODULE,
.open = usb_open,
};
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
new file mode 100644
index 0000000..16332cc
--- /dev/null
+++ b/drivers/usb/core/generic.c
@@ -0,0 +1,208 @@
+/*
+ * drivers/usb/generic.c - generic driver for USB devices (not interfaces)
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * based on drivers/usb/usb.c which had the following copyrights:
+ * (C) Copyright Linus Torvalds 1999
+ * (C) Copyright Johannes Erdfelt 1999-2001
+ * (C) Copyright Andreas Gal 1999
+ * (C) Copyright Gregory P. Smith 1999
+ * (C) Copyright Deti Fliegl 1999 (new USB architecture)
+ * (C) Copyright Randy Dunlap 2000
+ * (C) Copyright David Brownell 2000-2004
+ * (C) Copyright Yggdrasil Computing, Inc. 2000
+ * (usb_device_id matching changes by Adam J. Richter)
+ * (C) Copyright Greg Kroah-Hartman 2002-2003
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/usb.h>
+#include "usb.h"
+
+static inline const char *plural(int n)
+{
+ return (n == 1 ? "" : "s");
+}
+
+static int choose_configuration(struct usb_device *udev)
+{
+ int i;
+ int num_configs;
+ int insufficient_power = 0;
+ struct usb_host_config *c, *best;
+
+ best = NULL;
+ c = udev->config;
+ num_configs = udev->descriptor.bNumConfigurations;
+ for (i = 0; i < num_configs; (i++, c++)) {
+ struct usb_interface_descriptor *desc = NULL;
+
+ /* It's possible that a config has no interfaces! */
+ if (c->desc.bNumInterfaces > 0)
+ desc = &c->intf_cache[0]->altsetting->desc;
+
+ /*
+ * HP's USB bus-powered keyboard has only one configuration
+ * and it claims to be self-powered; other devices may have
+ * similar errors in their descriptors. If the next test
+ * were allowed to execute, such configurations would always
+ * be rejected and the devices would not work as expected.
+ * In the meantime, we run the risk of selecting a config
+ * that requires external power at a time when that power
+ * isn't available. It seems to be the lesser of two evils.
+ *
+ * Bugzilla #6448 reports a device that appears to crash
+ * when it receives a GET_DEVICE_STATUS request! We don't
+ * have any other way to tell whether a device is self-powered,
+ * but since we don't use that information anywhere but here,
+ * the call has been removed.
+ *
+ * Maybe the GET_DEVICE_STATUS call and the test below can
+ * be reinstated when device firmwares become more reliable.
+ * Don't hold your breath.
+ */
+#if 0
+ /* Rule out self-powered configs for a bus-powered device */
+ if (bus_powered && (c->desc.bmAttributes &
+ USB_CONFIG_ATT_SELFPOWER))
+ continue;
+#endif
+
+ /*
+ * The next test may not be as effective as it should be.
+ * Some hubs have errors in their descriptor, claiming
+ * to be self-powered when they are really bus-powered.
+ * We will overestimate the amount of current such hubs
+ * make available for each port.
+ *
+ * This is a fairly benign sort of failure. It won't
+ * cause us to reject configurations that we should have
+ * accepted.
+ */
+
+ /* Rule out configs that draw too much bus current */
+ if (c->desc.bMaxPower * 2 > udev->bus_mA) {
+ insufficient_power++;
+ continue;
+ }
+
+ /* If the first config's first interface is COMM/2/0xff
+ * (MSFT RNDIS), rule it out unless Linux has host-side
+ * RNDIS support. */
+ if (i == 0 && desc
+ && desc->bInterfaceClass == USB_CLASS_COMM
+ && desc->bInterfaceSubClass == 2
+ && desc->bInterfaceProtocol == 0xff) {
+#ifndef CONFIG_USB_NET_RNDIS_HOST
+ continue;
+#else
+ best = c;
+#endif
+ }
+
+ /* From the remaining configs, choose the first one whose
+ * first interface is for a non-vendor-specific class.
+ * Reason: Linux is more likely to have a class driver
+ * than a vendor-specific driver. */
+ else if (udev->descriptor.bDeviceClass !=
+ USB_CLASS_VENDOR_SPEC &&
+ (!desc || desc->bInterfaceClass !=
+ USB_CLASS_VENDOR_SPEC)) {
+ best = c;
+ break;
+ }
+
+ /* If all the remaining configs are vendor-specific,
+ * choose the first one. */
+ else if (!best)
+ best = c;
+ }
+
+ if (insufficient_power > 0)
+ dev_info(&udev->dev, "rejected %d configuration%s "
+ "due to insufficient available bus power\n",
+ insufficient_power, plural(insufficient_power));
+
+ if (best) {
+ i = best->desc.bConfigurationValue;
+ dev_info(&udev->dev,
+ "configuration #%d chosen from %d choice%s\n",
+ i, num_configs, plural(num_configs));
+ } else {
+ i = -1;
+ dev_warn(&udev->dev,
+ "no configuration chosen from %d choice%s\n",
+ num_configs, plural(num_configs));
+ }
+ return i;
+}
+
+static int generic_probe(struct usb_device *udev)
+{
+ int err, c;
+
+ /* put device-specific files into sysfs */
+ usb_create_sysfs_dev_files(udev);
+
+ /* Choose and set the configuration. This registers the interfaces
+ * with the driver core and lets interface drivers bind to them.
+ */
+ c = choose_configuration(udev);
+ if (c >= 0) {
+ err = usb_set_configuration(udev, c);
+ if (err) {
+ dev_err(&udev->dev, "can't set config #%d, error %d\n",
+ c, err);
+ /* This need not be fatal. The user can try to
+ * set other configurations. */
+ }
+ }
+
+ /* USB device state == configured ... usable */
+ usb_notify_add_device(udev);
+
+ return 0;
+}
+
+static void generic_disconnect(struct usb_device *udev)
+{
+ usb_notify_remove_device(udev);
+
+ /* if this is only an unbind, not a physical disconnect, then
+ * unconfigure the device */
+ if (udev->actconfig)
+ usb_set_configuration(udev, 0);
+
+ usb_remove_sysfs_dev_files(udev);
+}
+
+#ifdef CONFIG_PM
+
+static int generic_suspend(struct usb_device *udev, pm_message_t msg)
+{
+ /* USB devices enter SUSPEND state through their hubs, but can be
+ * marked for FREEZE as soon as their children are already idled.
+ * But those semantics are useless, so we equate the two (sigh).
+ */
+ return usb_port_suspend(udev);
+}
+
+static int generic_resume(struct usb_device *udev)
+{
+ return usb_port_resume(udev);
+}
+
+#endif /* CONFIG_PM */
+
+struct usb_device_driver usb_generic_driver = {
+ .name = "usb",
+ .probe = generic_probe,
+ .disconnect = generic_disconnect,
+#ifdef CONFIG_PM
+ .suspend = generic_suspend,
+ .resume = generic_resume,
+#endif
+ .supports_autosuspend = 1,
+};
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 5078fb3..edf4300 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -281,7 +281,7 @@
(void) usb_hcd_pci_resume (dev);
}
- } else {
+ } else if (hcd->state != HC_STATE_HALT) {
dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n",
hcd->state);
WARN_ON(1);
@@ -413,4 +413,20 @@
#endif /* CONFIG_PM */
+/**
+ * usb_hcd_pci_shutdown - shutdown host controller
+ * @dev: USB Host Controller being shutdown
+ */
+void usb_hcd_pci_shutdown (struct pci_dev *dev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = pci_get_drvdata(dev);
+ if (!hcd)
+ return;
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL (usb_hcd_pci_shutdown);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fb4d058..e86f629 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -36,6 +36,7 @@
#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
+#include <linux/platform_device.h>
#include <linux/usb.h>
@@ -632,31 +633,20 @@
/*-------------------------------------------------------------------------*/
-/* Asynchronous unlinks of root-hub control URBs are legal, but they
- * don't do anything. Status URB unlinks must be made in process context
- * with interrupts enabled.
+/* Unlinks of root-hub control URBs are legal, but they don't do anything
+ * since these URBs always execute synchronously.
*/
static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
{
+ unsigned long flags;
+
if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */
- if (in_interrupt())
- return 0; /* nothing to do */
-
- spin_lock_irq(&urb->lock); /* from usb_kill_urb */
- ++urb->reject;
- spin_unlock_irq(&urb->lock);
-
- wait_event(usb_kill_urb_queue,
- atomic_read(&urb->use_count) == 0);
-
- spin_lock_irq(&urb->lock);
- --urb->reject;
- spin_unlock_irq(&urb->lock);
+ ; /* Do nothing */
} else { /* Status URB */
if (!hcd->uses_new_polling)
- del_timer_sync (&hcd->rh_timer);
- local_irq_disable ();
+ del_timer (&hcd->rh_timer);
+ local_irq_save (flags);
spin_lock (&hcd_root_hub_lock);
if (urb == hcd->status_urb) {
hcd->status_urb = NULL;
@@ -666,7 +656,7 @@
spin_unlock (&hcd_root_hub_lock);
if (urb)
usb_hcd_giveback_urb (hcd, urb, NULL);
- local_irq_enable ();
+ local_irq_restore (flags);
}
return 0;
@@ -674,31 +664,6 @@
/*-------------------------------------------------------------------------*/
-/* exported only within usbcore */
-struct usb_bus *usb_bus_get(struct usb_bus *bus)
-{
- if (bus)
- kref_get(&bus->kref);
- return bus;
-}
-
-static void usb_host_release(struct kref *kref)
-{
- struct usb_bus *bus = container_of(kref, struct usb_bus, kref);
-
- if (bus->release)
- bus->release(bus);
-}
-
-/* exported only within usbcore */
-void usb_bus_put(struct usb_bus *bus)
-{
- if (bus)
- kref_put(&bus->kref, usb_host_release);
-}
-
-/*-------------------------------------------------------------------------*/
-
static struct class *usb_host_class;
int usb_host_init(void)
@@ -730,39 +695,12 @@
bus->devnum_next = 1;
bus->root_hub = NULL;
- bus->hcpriv = NULL;
bus->busnum = -1;
bus->bandwidth_allocated = 0;
bus->bandwidth_int_reqs = 0;
bus->bandwidth_isoc_reqs = 0;
INIT_LIST_HEAD (&bus->bus_list);
-
- kref_init(&bus->kref);
-}
-
-/**
- * usb_alloc_bus - creates a new USB host controller structure
- * @op: pointer to a struct usb_operations that this bus structure should use
- * Context: !in_interrupt()
- *
- * Creates a USB host controller bus structure with the specified
- * usb_operations and initializes all the necessary internal objects.
- *
- * If no memory is available, NULL is returned.
- *
- * The caller should call usb_put_bus() when it is finished with the structure.
- */
-struct usb_bus *usb_alloc_bus (struct usb_operations *op)
-{
- struct usb_bus *bus;
-
- bus = kzalloc (sizeof *bus, GFP_KERNEL);
- if (!bus)
- return NULL;
- usb_bus_init (bus);
- bus->op = op;
- return bus;
}
/*-------------------------------------------------------------------------*/
@@ -1112,10 +1050,10 @@
* expects usb_submit_urb() to have sanity checked and conditioned all
* inputs in the urb
*/
-static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
{
int status;
- struct usb_hcd *hcd = urb->dev->bus->hcpriv;
+ struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
struct usb_host_endpoint *ep;
unsigned long flags;
@@ -1186,7 +1124,7 @@
/* lower level hcd code should use *_dma exclusively,
* unless it uses pio or talks to another transport.
*/
- if (hcd->self.controller->dma_mask) {
+ if (hcd->self.uses_dma) {
if (usb_pipecontrol (urb->pipe)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
urb->setup_dma = dma_map_single (
@@ -1221,9 +1159,10 @@
/*-------------------------------------------------------------------------*/
/* called in any context */
-static int hcd_get_frame_number (struct usb_device *udev)
+int usb_hcd_get_frame_number (struct usb_device *udev)
{
- struct usb_hcd *hcd = (struct usb_hcd *)udev->bus->hcpriv;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
if (!HC_IS_RUNNING (hcd->state))
return -ESHUTDOWN;
return hcd->driver->get_frame_number (hcd);
@@ -1263,7 +1202,7 @@
* caller guarantees urb won't be recycled till both unlink()
* and the urb's completion function return
*/
-static int hcd_unlink_urb (struct urb *urb, int status)
+int usb_hcd_unlink_urb (struct urb *urb, int status)
{
struct usb_host_endpoint *ep;
struct usb_hcd *hcd = NULL;
@@ -1296,7 +1235,7 @@
spin_lock (&hcd_data_lock);
sys = &urb->dev->dev;
- hcd = urb->dev->bus->hcpriv;
+ hcd = bus_to_hcd(urb->dev->bus);
if (hcd == NULL) {
retval = -ENODEV;
goto done;
@@ -1354,41 +1293,33 @@
/*-------------------------------------------------------------------------*/
/* disables the endpoint: cancels any pending urbs, then synchronizes with
- * the hcd to make sure all endpoint state is gone from hardware. use for
+ * the hcd to make sure all endpoint state is gone from hardware, and then
+ * waits until the endpoint's queue is completely drained. use for
* set_configuration, set_interface, driver removal, physical disconnect.
*
* example: a qh stored in ep->hcpriv, holding state related to endpoint
* type, maxpacket size, toggle, halt status, and scheduling.
*/
-static void
-hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep)
+void usb_hcd_endpoint_disable (struct usb_device *udev,
+ struct usb_host_endpoint *ep)
{
struct usb_hcd *hcd;
struct urb *urb;
- hcd = udev->bus->hcpriv;
+ hcd = bus_to_hcd(udev->bus);
WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT &&
udev->state != USB_STATE_NOTATTACHED);
local_irq_disable ();
- /* FIXME move most of this into message.c as part of its
- * endpoint disable logic
- */
-
/* ep is already gone from udev->ep_{in,out}[]; no more submits */
rescan:
spin_lock (&hcd_data_lock);
list_for_each_entry (urb, &ep->urb_list, urb_list) {
int tmp;
- /* another cpu may be in hcd, spinning on hcd_data_lock
- * to giveback() this urb. the races here should be
- * small, but a full fix needs a new "can't submit"
- * urb state.
- * FIXME urb->reject should allow that...
- */
+ /* the urb may already have been unlinked */
if (urb->status != -EINPROGRESS)
continue;
usb_get_urb (urb);
@@ -1430,6 +1361,30 @@
might_sleep ();
if (hcd->driver->endpoint_disable)
hcd->driver->endpoint_disable (hcd, ep);
+
+ /* Wait until the endpoint queue is completely empty. Most HCDs
+ * will have done this already in their endpoint_disable method,
+ * but some might not. And there could be root-hub control URBs
+ * still pending since they aren't affected by the HCDs'
+ * endpoint_disable methods.
+ */
+ while (!list_empty (&ep->urb_list)) {
+ spin_lock_irq (&hcd_data_lock);
+
+ /* The list may have changed while we acquired the spinlock */
+ urb = NULL;
+ if (!list_empty (&ep->urb_list)) {
+ urb = list_entry (ep->urb_list.prev, struct urb,
+ urb_list);
+ usb_get_urb (urb);
+ }
+ spin_unlock_irq (&hcd_data_lock);
+
+ if (urb) {
+ usb_kill_urb (urb);
+ usb_put_urb (urb);
+ }
+ }
}
/*-------------------------------------------------------------------------*/
@@ -1476,50 +1431,6 @@
return status;
}
-/*
- * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports
- * @hcd: host controller for this root hub
- *
- * This call arranges that usb_hcd_resume_root_hub() is safe to call later;
- * that the HCD's root hub polling is deactivated; and that the root's hub
- * driver is suspended. HCDs may call this to autosuspend when their root
- * hub's downstream ports are all inactive: unpowered, disconnected,
- * disabled, or suspended.
- *
- * The HCD will autoresume on device connect change detection (using SRP
- * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling
- * from any ports that are suspended (if that is enabled). In most cases,
- * overcurrent signaling (on powered ports) will also start autoresume.
- *
- * Always called with IRQs blocked.
- */
-void usb_hcd_suspend_root_hub (struct usb_hcd *hcd)
-{
- struct urb *urb;
-
- spin_lock (&hcd_root_hub_lock);
- usb_suspend_root_hub (hcd->self.root_hub);
-
- /* force status urb to complete/unlink while suspended */
- if (hcd->status_urb) {
- urb = hcd->status_urb;
- urb->status = -ECONNRESET;
- urb->hcpriv = NULL;
- urb->actual_length = 0;
-
- del_timer (&hcd->rh_timer);
- hcd->poll_pending = 0;
- hcd->status_urb = NULL;
- } else
- urb = NULL;
- spin_unlock (&hcd_root_hub_lock);
- hcd->state = HC_STATE_SUSPENDED;
-
- if (urb)
- usb_hcd_giveback_urb (hcd, urb, NULL);
-}
-EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub);
-
/**
* usb_hcd_resume_root_hub - called by HCD to resume its root hub
* @hcd: host controller for this root hub
@@ -1583,20 +1494,6 @@
/*-------------------------------------------------------------------------*/
-/*
- * usb_hcd_operations - adapts usb_bus framework to HCD framework (bus glue)
- */
-static struct usb_operations usb_hcd_operations = {
- .get_frame_number = hcd_get_frame_number,
- .submit_urb = hcd_submit_urb,
- .unlink_urb = hcd_unlink_urb,
- .buffer_alloc = hcd_buffer_alloc,
- .buffer_free = hcd_buffer_free,
- .disable = hcd_endpoint_disable,
-};
-
-/*-------------------------------------------------------------------------*/
-
/**
* usb_hcd_giveback_urb - return URB from HCD to device driver
* @hcd: host controller returning the URB
@@ -1617,8 +1514,9 @@
at_root_hub = (urb->dev == hcd->self.root_hub);
urb_unlink (urb);
- /* lower level hcd code should use *_dma exclusively */
- if (hcd->self.controller->dma_mask && !at_root_hub) {
+ /* lower level hcd code should use *_dma exclusively if the
+ * host controller does DMA */
+ if (hcd->self.uses_dma && !at_root_hub) {
if (usb_pipecontrol (urb->pipe)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
dma_unmap_single (hcd->self.controller, urb->setup_dma,
@@ -1704,14 +1602,6 @@
/*-------------------------------------------------------------------------*/
-static void hcd_release (struct usb_bus *bus)
-{
- struct usb_hcd *hcd;
-
- hcd = container_of(bus, struct usb_hcd, self);
- kfree(hcd);
-}
-
/**
* usb_create_hcd - create and initialize an HCD structure
* @driver: HC driver that will use this hcd
@@ -1736,13 +1626,12 @@
return NULL;
}
dev_set_drvdata(dev, hcd);
+ kref_init(&hcd->kref);
usb_bus_init(&hcd->self);
- hcd->self.op = &usb_hcd_operations;
- hcd->self.hcpriv = hcd;
- hcd->self.release = &hcd_release;
hcd->self.controller = dev;
hcd->self.bus_name = bus_name;
+ hcd->self.uses_dma = (dev->dma_mask != NULL);
init_timer(&hcd->rh_timer);
hcd->rh_timer.function = rh_timer_func;
@@ -1756,10 +1645,25 @@
}
EXPORT_SYMBOL (usb_create_hcd);
+static void hcd_release (struct kref *kref)
+{
+ struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
+
+ kfree(hcd);
+}
+
+struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
+{
+ if (hcd)
+ kref_get (&hcd->kref);
+ return hcd;
+}
+EXPORT_SYMBOL (usb_get_hcd);
+
void usb_put_hcd (struct usb_hcd *hcd)
{
- dev_set_drvdata(hcd->self.controller, NULL);
- usb_bus_put(&hcd->self);
+ if (hcd)
+ kref_put (&hcd->kref, hcd_release);
}
EXPORT_SYMBOL (usb_put_hcd);
@@ -1915,6 +1819,16 @@
}
EXPORT_SYMBOL (usb_remove_hcd);
+void
+usb_hcd_platform_shutdown(struct platform_device* dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL (usb_hcd_platform_shutdown);
+
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_USB_MON)
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 7022aaf..676877c 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -55,12 +55,13 @@
/*-------------------------------------------------------------------------*/
-struct usb_hcd { /* usb_bus.hcpriv points to this */
+struct usb_hcd {
/*
* housekeeping
*/
struct usb_bus self; /* hcd is-a bus */
+ struct kref kref; /* reference counter */
const char *product_desc; /* product/vendor string */
char irq_descr[24]; /* driver + bus # */
@@ -85,6 +86,7 @@
unsigned uses_new_polling:1;
unsigned poll_rh:1; /* poll for rh status? */
unsigned poll_pending:1; /* status has changed? */
+ unsigned wireless:1; /* Wireless USB HCD */
int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
@@ -128,8 +130,10 @@
return &hcd->self;
}
-
-// urb.hcpriv is really hardware-specific
+static inline struct usb_hcd *bus_to_hcd (struct usb_bus *bus)
+{
+ return container_of(bus, struct usb_hcd, self);
+}
struct hcd_timeout { /* timeouts we allocate */
struct list_head timeout_list;
@@ -138,28 +142,6 @@
/*-------------------------------------------------------------------------*/
-/*
- * FIXME usb_operations should vanish or become hc_driver,
- * when usb_bus and usb_hcd become the same thing.
- */
-
-struct usb_operations {
- int (*get_frame_number) (struct usb_device *usb_dev);
- int (*submit_urb) (struct urb *urb, gfp_t mem_flags);
- int (*unlink_urb) (struct urb *urb, int status);
-
- /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
- void *(*buffer_alloc)(struct usb_bus *bus, size_t size,
- gfp_t mem_flags,
- dma_addr_t *dma);
- void (*buffer_free)(struct usb_bus *bus, size_t size,
- void *addr, dma_addr_t dma);
-
- void (*disable)(struct usb_device *udev,
- struct usb_host_endpoint *ep);
-};
-
-/* each driver provides one of these, and hardware init support */
struct pt_regs;
@@ -192,6 +174,9 @@
/* cleanly make HCD stop writing memory and doing I/O */
void (*stop) (struct usb_hcd *hcd);
+ /* shutdown HCD */
+ void (*shutdown) (struct usb_hcd *hcd);
+
/* return current frame number */
int (*get_frame_number) (struct usb_hcd *hcd);
@@ -218,15 +203,25 @@
/* Needed only if port-change IRQs are level-triggered */
};
-extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs);
+extern int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags);
+extern int usb_hcd_unlink_urb (struct urb *urb, int status);
+extern void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb,
+ struct pt_regs *regs);
+extern void usb_hcd_endpoint_disable (struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern int usb_hcd_get_frame_number (struct usb_device *udev);
extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
struct device *dev, char *bus_name);
+extern struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd);
extern void usb_put_hcd (struct usb_hcd *hcd);
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
+struct platform_device;
+extern void usb_hcd_platform_shutdown(struct platform_device* dev);
+
#ifdef CONFIG_PCI
struct pci_dev;
struct pci_device_id;
@@ -239,6 +234,8 @@
extern int usb_hcd_pci_resume (struct pci_dev *dev);
#endif /* CONFIG_PM */
+extern void usb_hcd_pci_shutdown (struct pci_dev *dev);
+
#endif /* CONFIG_PCI */
/* pci-ish (pdev null is ok) buffer alloc/mapping support */
@@ -352,8 +349,6 @@
/*-------------------------------------------------------------------------*/
-extern struct usb_bus *usb_alloc_bus (struct usb_operations *);
-
extern void usb_set_device_state(struct usb_device *udev,
enum usb_device_state new_state);
@@ -365,9 +360,6 @@
extern struct mutex usb_bus_list_lock;
extern wait_queue_head_t usb_kill_urb_queue;
-extern struct usb_bus *usb_bus_get (struct usb_bus *bus);
-extern void usb_bus_put (struct usb_bus *bus);
-
extern void usb_enable_root_hub_irq (struct usb_bus *bus);
extern int usb_find_interface_driver (struct usb_device *dev,
@@ -376,17 +368,11 @@
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
#ifdef CONFIG_PM
-extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd);
extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
extern void usb_root_hub_lost_power (struct usb_device *rhdev);
extern int hcd_bus_suspend (struct usb_bus *bus);
extern int hcd_bus_resume (struct usb_bus *bus);
#else
-static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd)
-{
- return;
-}
-
static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
{
return;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 26c8cb5..2a8cb3c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -293,7 +293,7 @@
/* completion function, fires on port status changes and various faults */
static void hub_irq(struct urb *urb, struct pt_regs *regs)
{
- struct usb_hub *hub = (struct usb_hub *)urb->context;
+ struct usb_hub *hub = urb->context;
int status;
int i;
unsigned long bits;
@@ -311,7 +311,7 @@
goto resubmit;
hub->error = urb->status;
/* FALL THROUGH */
-
+
/* let khubd handle things */
case 0: /* we got data: port status changed */
bits = 0;
@@ -452,18 +452,14 @@
msleep(max(pgood_delay, (unsigned) 100));
}
-static inline void __hub_quiesce(struct usb_hub *hub)
+static void hub_quiesce(struct usb_hub *hub)
{
/* (nonblocking) khubd and related activity won't re-trigger */
hub->quiescing = 1;
hub->activating = 0;
hub->resume_root_hub = 0;
-}
-static void hub_quiesce(struct usb_hub *hub)
-{
/* (blocking) stop khubd and related activity */
- __hub_quiesce(hub);
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
@@ -868,13 +864,8 @@
endpoint = &desc->endpoint[0].desc;
- /* Output endpoint? Curiouser and curiouser.. */
- if (!(endpoint->bEndpointAddress & USB_DIR_IN))
- goto descriptor_error;
-
- /* If it's not an interrupt endpoint, we'd better punt! */
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT)
+ /* If it's not an interrupt in endpoint, we'd better punt! */
+ if (!usb_endpoint_is_int_in(endpoint))
goto descriptor_error;
/* We found a hub */
@@ -1022,26 +1013,29 @@
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
else if (new_state != USB_STATE_NOTATTACHED) {
- udev->state = new_state;
/* root hub wakeup capabilities are managed out-of-band
* and may involve silicon errata ... ignore them here.
*/
if (udev->parent) {
- if (new_state == USB_STATE_CONFIGURED)
+ if (udev->state == USB_STATE_SUSPENDED
+ || new_state == USB_STATE_SUSPENDED)
+ ; /* No change to wakeup settings */
+ else if (new_state == USB_STATE_CONFIGURED)
device_init_wakeup(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
- else if (new_state != USB_STATE_SUSPENDED)
+ else
device_init_wakeup(&udev->dev, 0);
}
+ udev->state = new_state;
} else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM
/**
* usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
@@ -1059,6 +1053,12 @@
unsigned long flags;
dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
+
+ /* Make sure no potential wakeup events get lost,
+ * by forcing the root hub to be resumed.
+ */
+ rhdev->dev.power.prev_state.event = PM_EVENT_ON;
+
spin_lock_irqsave(&device_state_lock, flags);
hub = hdev_to_hub(rhdev);
for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
@@ -1072,7 +1072,7 @@
}
EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
-#endif
+#endif /* CONFIG_PM */
static void choose_address(struct usb_device *udev)
{
@@ -1148,144 +1148,28 @@
* cleaning up all state associated with the current configuration
* so that the hardware is now fully quiesced.
*/
+ dev_dbg (&udev->dev, "unregistering device\n");
usb_disable_device(udev, 0);
- usb_notify_remove_device(udev);
+ usb_unlock_device(udev);
- /* Free the device number, remove the /proc/bus/usb entry and
- * the sysfs attributes, and delete the parent's children[]
+ /* Unregister the device. The device driver is responsible
+ * for removing the device files from usbfs and sysfs and for
+ * de-configuring the device.
+ */
+ device_del(&udev->dev);
+
+ /* Free the device number and delete the parent's children[]
* (or root_hub) pointer.
*/
- dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
- usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
spin_lock_irq(&device_state_lock);
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
- usb_unlock_device(udev);
-
- device_unregister(&udev->dev);
-}
-
-static inline const char *plural(int n)
-{
- return (n == 1 ? "" : "s");
-}
-
-static int choose_configuration(struct usb_device *udev)
-{
- int i;
- int num_configs;
- int insufficient_power = 0;
- struct usb_host_config *c, *best;
-
- best = NULL;
- c = udev->config;
- num_configs = udev->descriptor.bNumConfigurations;
- for (i = 0; i < num_configs; (i++, c++)) {
- struct usb_interface_descriptor *desc = NULL;
-
- /* It's possible that a config has no interfaces! */
- if (c->desc.bNumInterfaces > 0)
- desc = &c->intf_cache[0]->altsetting->desc;
-
- /*
- * HP's USB bus-powered keyboard has only one configuration
- * and it claims to be self-powered; other devices may have
- * similar errors in their descriptors. If the next test
- * were allowed to execute, such configurations would always
- * be rejected and the devices would not work as expected.
- * In the meantime, we run the risk of selecting a config
- * that requires external power at a time when that power
- * isn't available. It seems to be the lesser of two evils.
- *
- * Bugzilla #6448 reports a device that appears to crash
- * when it receives a GET_DEVICE_STATUS request! We don't
- * have any other way to tell whether a device is self-powered,
- * but since we don't use that information anywhere but here,
- * the call has been removed.
- *
- * Maybe the GET_DEVICE_STATUS call and the test below can
- * be reinstated when device firmwares become more reliable.
- * Don't hold your breath.
- */
-#if 0
- /* Rule out self-powered configs for a bus-powered device */
- if (bus_powered && (c->desc.bmAttributes &
- USB_CONFIG_ATT_SELFPOWER))
- continue;
-#endif
-
- /*
- * The next test may not be as effective as it should be.
- * Some hubs have errors in their descriptor, claiming
- * to be self-powered when they are really bus-powered.
- * We will overestimate the amount of current such hubs
- * make available for each port.
- *
- * This is a fairly benign sort of failure. It won't
- * cause us to reject configurations that we should have
- * accepted.
- */
-
- /* Rule out configs that draw too much bus current */
- if (c->desc.bMaxPower * 2 > udev->bus_mA) {
- insufficient_power++;
- continue;
- }
-
- /* If the first config's first interface is COMM/2/0xff
- * (MSFT RNDIS), rule it out unless Linux has host-side
- * RNDIS support. */
- if (i == 0 && desc
- && desc->bInterfaceClass == USB_CLASS_COMM
- && desc->bInterfaceSubClass == 2
- && desc->bInterfaceProtocol == 0xff) {
-#ifndef CONFIG_USB_NET_RNDIS_HOST
- continue;
-#else
- best = c;
-#endif
- }
-
- /* From the remaining configs, choose the first one whose
- * first interface is for a non-vendor-specific class.
- * Reason: Linux is more likely to have a class driver
- * than a vendor-specific driver. */
- else if (udev->descriptor.bDeviceClass !=
- USB_CLASS_VENDOR_SPEC &&
- (!desc || desc->bInterfaceClass !=
- USB_CLASS_VENDOR_SPEC)) {
- best = c;
- break;
- }
-
- /* If all the remaining configs are vendor-specific,
- * choose the first one. */
- else if (!best)
- best = c;
- }
-
- if (insufficient_power > 0)
- dev_info(&udev->dev, "rejected %d configuration%s "
- "due to insufficient available bus power\n",
- insufficient_power, plural(insufficient_power));
-
- if (best) {
- i = best->desc.bConfigurationValue;
- dev_info(&udev->dev,
- "configuration #%d chosen from %d choice%s\n",
- i, num_configs, plural(num_configs));
- } else {
- i = -1;
- dev_warn(&udev->dev,
- "no configuration chosen from %d choice%s\n",
- num_configs, plural(num_configs));
- }
- return i;
+ put_device(&udev->dev);
}
#ifdef DEBUG
@@ -1328,7 +1212,6 @@
int usb_new_device(struct usb_device *udev)
{
int err;
- int c;
err = usb_get_configuration(udev);
if (err < 0) {
@@ -1371,8 +1254,7 @@
USB_DT_OTG, (void **) &desc) == 0) {
if (desc->bmAttributes & USB_OTG_HNP) {
unsigned port1 = udev->portnum;
- struct usb_device *root = udev->parent;
-
+
dev_info(&udev->dev,
"Dual-Role OTG device on %sHNP port\n",
(port1 == bus->otg_port)
@@ -1407,9 +1289,9 @@
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_suspend_device(struct usb_device *,
+ static int __usb_port_suspend(struct usb_device *,
int port1);
- err = __usb_suspend_device(udev, udev->bus->otg_port);
+ err = __usb_port_suspend(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
@@ -1418,34 +1300,15 @@
}
#endif
- /* put device-specific files into sysfs */
+ /* Register the device. The device driver is responsible
+ * for adding the device files to usbfs and sysfs and for
+ * configuring the device.
+ */
err = device_add (&udev->dev);
if (err) {
dev_err(&udev->dev, "can't device_add, error %d\n", err);
goto fail;
}
- usb_create_sysfs_dev_files (udev);
-
- usb_lock_device(udev);
-
- /* choose and set the configuration. that registers the interfaces
- * with the driver core, and lets usb device drivers bind to them.
- */
- c = choose_configuration(udev);
- if (c >= 0) {
- err = usb_set_configuration(udev, c);
- if (err) {
- dev_err(&udev->dev, "can't set config #%d, error %d\n",
- c, err);
- /* This need not be fatal. The user can try to
- * set other configurations. */
- }
- }
-
- /* USB device state == configured ... usable */
- usb_notify_add_device(udev);
-
- usb_unlock_device(udev);
return 0;
@@ -1472,6 +1335,18 @@
return ret;
}
+
+/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
+static unsigned hub_is_wusb(struct usb_hub *hub)
+{
+ struct usb_hcd *hcd;
+ if (hub->hdev->parent != NULL) /* not a root hub? */
+ return 0;
+ hcd = container_of(hub->hdev->bus, struct usb_hcd, self);
+ return hcd->wireless;
+}
+
+
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
@@ -1512,7 +1387,9 @@
/* if we`ve finished resetting, then break out of the loop */
if (!(portstatus & USB_PORT_STAT_RESET) &&
(portstatus & USB_PORT_STAT_ENABLE)) {
- if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+ if (hub_is_wusb(hub))
+ udev->speed = USB_SPEED_VARIABLE;
+ else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
udev->speed = USB_SPEED_LOW;
@@ -1607,6 +1484,7 @@
kick_khubd(hub);
}
+#ifdef CONFIG_PM
#ifdef CONFIG_USB_SUSPEND
@@ -1633,7 +1511,7 @@
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
- if (device_may_wakeup(&udev->dev)) {
+ if (udev->do_remote_wakeup) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
@@ -1659,7 +1537,8 @@
USB_CTRL_SET_TIMEOUT);
} else {
/* device has up to 10 msec to fully suspend */
- dev_dbg(&udev->dev, "usb suspend\n");
+ dev_dbg(&udev->dev, "usb %ssuspend\n",
+ udev->auto_pm ? "auto-" : "");
usb_set_device_state(udev, USB_STATE_SUSPENDED);
msleep(10);
}
@@ -1684,7 +1563,7 @@
* the root hub for their bus goes into global suspend ... so we don't
* (falsely) update the device power state to say it suspended.
*/
-static int __usb_suspend_device (struct usb_device *udev, int port1)
+static int __usb_port_suspend (struct usb_device *udev, int port1)
{
int status = 0;
@@ -1692,49 +1571,29 @@
if (port1 < 0)
return port1;
- if (udev->state == USB_STATE_SUSPENDED
- || udev->state == USB_STATE_NOTATTACHED) {
- return 0;
- }
-
- /* all interfaces must already be suspended */
- if (udev->actconfig) {
- int i;
-
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *intf;
-
- intf = udev->actconfig->interface[i];
- if (is_active(intf)) {
- dev_dbg(&intf->dev, "nyet suspended\n");
- return -EBUSY;
- }
- }
- }
-
- /* we only change a device's upstream USB link.
- * root hubs have no upstream USB link.
+ /* we change the device's upstream USB link,
+ * but root hubs have no upstream USB link.
*/
if (udev->parent)
status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
udev);
-
- if (status == 0)
- udev->dev.power.power_state = PMSG_SUSPEND;
+ else {
+ dev_dbg(&udev->dev, "usb %ssuspend\n",
+ udev->auto_pm ? "auto-" : "");
+ usb_set_device_state(udev, USB_STATE_SUSPENDED);
+ }
return status;
}
-#endif
-
/*
- * usb_suspend_device - suspend a usb device
+ * usb_port_suspend - suspend a usb device's upstream port
* @udev: device that's no longer in active use
* Context: must be able to sleep; device not locked; pm locks held
*
* Suspends a USB device that isn't in active use, conserving power.
* Devices may wake out of a suspend, if anything important happens,
* using the remote wakeup mechanism. They may also be taken out of
- * suspend by the host, using usb_resume_device(). It's also routine
+ * suspend by the host, using usb_port_resume(). It's also routine
* to disconnect devices while they are suspended.
*
* This only affects the USB hardware for a device; its interfaces
@@ -1746,17 +1605,9 @@
*
* Returns 0 on success, else negative errno.
*/
-int usb_suspend_device(struct usb_device *udev)
+int usb_port_suspend(struct usb_device *udev)
{
-#ifdef CONFIG_USB_SUSPEND
- if (udev->state == USB_STATE_NOTATTACHED)
- return -ENODEV;
- return __usb_suspend_device(udev, udev->portnum);
-#else
- /* NOTE: udev->state unchanged, it's not lying ... */
- udev->dev.power.power_state = PMSG_SUSPEND;
- return 0;
-#endif
+ return __usb_port_suspend(udev, udev->portnum);
}
/*
@@ -1767,7 +1618,7 @@
* resume (by host) or remote wakeup (by device) ... now see what changed
* in the tree that's rooted at this device.
*/
-static int finish_device_resume(struct usb_device *udev)
+static int finish_port_resume(struct usb_device *udev)
{
int status;
u16 devstatus;
@@ -1783,7 +1634,6 @@
usb_set_device_state(udev, udev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
- udev->dev.power.power_state = PMSG_ON;
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
@@ -1798,9 +1648,6 @@
"gone after usb resume? status %d\n",
status);
else if (udev->actconfig) {
- unsigned i;
- int (*resume)(struct device *);
-
le16_to_cpus(&devstatus);
if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
&& udev->parent) {
@@ -1811,24 +1658,9 @@
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
- if (status) {
+ if (status)
dev_dbg(&udev->dev, "disable remote "
"wakeup, status %d\n", status);
- status = 0;
- }
- }
-
- /* resume interface drivers; if this is a hub, it
- * may have a child resume event to deal with soon
- */
- resume = udev->dev.bus->resume;
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct device *dev =
- &udev->actconfig->interface[i]->dev;
-
- down(&dev->sem);
- (void) resume(dev);
- up(&dev->sem);
}
status = 0;
@@ -1839,8 +1671,6 @@
return status;
}
-#ifdef CONFIG_USB_SUSPEND
-
static int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
@@ -1848,6 +1678,8 @@
// dev_dbg(hub->intfdev, "resume port %d\n", port1);
+ set_bit(port1, hub->busy_bits);
+
/* see 7.1.7.7; affects power usage, but not budgeting */
status = clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
@@ -1861,7 +1693,8 @@
/* drive resume for at least 20 msec */
if (udev)
- dev_dbg(&udev->dev, "RESUME\n");
+ dev_dbg(&udev->dev, "usb %sresume\n",
+ udev->auto_pm ? "auto-" : "");
msleep(25);
#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
@@ -1891,19 +1724,21 @@
/* TRSMRCY = 10 msec */
msleep(10);
if (udev)
- status = finish_device_resume(udev);
+ status = finish_port_resume(udev);
}
}
if (status < 0)
hub_port_logical_disconnect(hub, port1);
+ clear_bit(port1, hub->busy_bits);
+ if (!hub->hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hub->hdev->bus);
+
return status;
}
-#endif
-
/*
- * usb_resume_device - re-activate a suspended usb device
+ * usb_port_resume - re-activate a suspended usb device's upstream port
* @udev: device to re-activate
* Context: must be able to sleep; device not locked; pm locks held
*
@@ -1915,36 +1750,24 @@
*
* Returns 0 on success, else negative errno.
*/
-int usb_resume_device(struct usb_device *udev)
+int usb_port_resume(struct usb_device *udev)
{
int status;
- if (udev->state == USB_STATE_NOTATTACHED)
- return -ENODEV;
-
- /* selective resume of one downstream hub-to-device port */
+ /* we change the device's upstream USB link,
+ * but root hubs have no upstream USB link.
+ */
if (udev->parent) {
-#ifdef CONFIG_USB_SUSPEND
- if (udev->state == USB_STATE_SUSPENDED) {
- // NOTE swsusp may bork us, device state being wrong...
- // NOTE this fails if parent is also suspended...
- status = hub_port_resume(hdev_to_hub(udev->parent),
- udev->portnum, udev);
- } else
-#endif
- status = 0;
- } else
- status = finish_device_resume(udev);
- if (status < 0)
- dev_dbg(&udev->dev, "can't resume, status %d\n",
- status);
-
- /* rebind drivers that had no suspend() */
- if (status == 0) {
- usb_unlock_device(udev);
- bus_rescan_devices(&usb_bus_type);
- usb_lock_device(udev);
+ // NOTE this fails if parent is also suspended...
+ status = hub_port_resume(hdev_to_hub(udev->parent),
+ udev->portnum, udev);
+ } else {
+ dev_dbg(&udev->dev, "usb %sresume\n",
+ udev->auto_pm ? "auto-" : "");
+ status = finish_port_resume(udev);
}
+ if (status < 0)
+ dev_dbg(&udev->dev, "can't resume, status %d\n", status);
return status;
}
@@ -1952,23 +1775,60 @@
{
int status = 0;
-#ifdef CONFIG_USB_SUSPEND
+ /* All this just to avoid sending a port-resume message
+ * to the parent hub! */
- /* don't repeat RESUME sequence if this device
- * was already woken up by some other task
- */
usb_lock_device(udev);
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
if (udev->state == USB_STATE_SUSPENDED) {
- dev_dbg(&udev->dev, "RESUME (wakeup)\n");
+ dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
/* TRSMRCY = 10 msec */
msleep(10);
- status = finish_device_resume(udev);
+ status = finish_port_resume(udev);
+ if (status == 0)
+ udev->dev.power.power_state.event = PM_EVENT_ON;
}
+ mutex_unlock(&udev->pm_mutex);
+
+ if (status == 0)
+ usb_autoresume_device(udev, 0);
usb_unlock_device(udev);
-#endif
return status;
}
+#else /* CONFIG_USB_SUSPEND */
+
+/* When CONFIG_USB_SUSPEND isn't set, we never suspend or resume any ports. */
+
+int usb_port_suspend(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int
+finish_port_resume(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int
+hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
+{
+ return 0;
+}
+
+int usb_port_resume(struct usb_device *udev)
+{
+ return 0;
+}
+
+static inline int remote_wakeup(struct usb_device *udev)
+{
+ return 0;
+}
+
+#endif
+
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
@@ -1980,13 +1840,17 @@
struct usb_device *udev;
udev = hdev->children [port1-1];
- if (udev && (udev->dev.power.power_state.event
- == PM_EVENT_ON
+ if (udev && msg.event == PM_EVENT_SUSPEND &&
#ifdef CONFIG_USB_SUSPEND
- || udev->state != USB_STATE_SUSPENDED
+ udev->state != USB_STATE_SUSPENDED
+#else
+ udev->dev.power.power_state.event
+ == PM_EVENT_ON
#endif
- )) {
- dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ ) {
+ if (!hdev->auto_pm)
+ dev_dbg(&intf->dev, "port %d nyet suspended\n",
+ port1);
return -EBUSY;
}
}
@@ -2035,66 +1899,22 @@
}
}
+ /* tell khubd to look for changes on this hub */
hub_activate(hub);
-
- /* REVISIT: this recursion probably shouldn't exist. Remove
- * this code sometime, after retesting with different root and
- * external hubs.
- */
-#ifdef CONFIG_USB_SUSPEND
- {
- unsigned port1;
-
- for (port1 = 1; port1 <= hdev->maxchild; port1++) {
- struct usb_device *udev;
- u16 portstat, portchange;
-
- udev = hdev->children [port1-1];
- status = hub_port_status(hub, port1, &portstat, &portchange);
- if (status == 0) {
- if (portchange & USB_PORT_STAT_C_SUSPEND) {
- clear_port_feature(hdev, port1,
- USB_PORT_FEAT_C_SUSPEND);
- portchange &= ~USB_PORT_STAT_C_SUSPEND;
- }
-
- /* let khubd handle disconnects etc */
- if (portchange)
- continue;
- }
-
- if (!udev || status < 0)
- continue;
- usb_lock_device(udev);
- if (portstat & USB_PORT_STAT_SUSPEND)
- status = hub_port_resume(hub, port1, udev);
- else {
- status = finish_device_resume(udev);
- if (status < 0) {
- dev_dbg(&intf->dev, "resume port %d --> %d\n",
- port1, status);
- hub_port_logical_disconnect(hub, port1);
- }
- }
- usb_unlock_device(udev);
- }
- }
-#endif
return 0;
}
-void usb_suspend_root_hub(struct usb_device *hdev)
-{
- struct usb_hub *hub = hdev_to_hub(hdev);
+#else /* CONFIG_PM */
- /* This also makes any led blinker stop retriggering. We're called
- * from irq, so the blinker might still be scheduled. Caller promises
- * that the root hub status URB will be canceled.
- */
- __hub_quiesce(hub);
- mark_quiesced(to_usb_interface(hub->intfdev));
+static inline int remote_wakeup(struct usb_device *udev)
+{
+ return 0;
}
+#define hub_suspend NULL
+#define hub_resume NULL
+#endif
+
void usb_resume_root_hub(struct usb_device *hdev)
{
struct usb_hub *hub = hdev_to_hub(hdev);
@@ -2214,6 +2034,7 @@
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
+ char *speed, *type;
/* root hub ports have a slightly longer reset period
* (from USB 2.0 spec, section 7.1.7.5)
@@ -2246,8 +2067,13 @@
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
+ * For Wireless USB devices, ep0 max packet is always 512 (tho
+ * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
+ case USB_SPEED_VARIABLE: /* fixed at 512 */
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+ break;
case USB_SPEED_HIGH: /* fixed at 64 */
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
@@ -2265,17 +2091,21 @@
goto fail;
}
+ type = "";
+ switch (udev->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ case USB_SPEED_VARIABLE:
+ speed = "variable";
+ type = "Wireless ";
+ break;
+ default: speed = "?"; break;
+ }
dev_info (&udev->dev,
- "%s %s speed USB device using %s and address %d\n",
- (udev->config) ? "reset" : "new",
- ({ char *speed; switch (udev->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }; speed;}),
- udev->bus->controller->driver->name,
- udev->devnum);
+ "%s %s speed %sUSB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new", speed, type,
+ udev->bus->controller->driver->name, udev->devnum);
/* Set up TT records, if needed */
if (hdev->tt) {
@@ -2317,6 +2147,8 @@
* down tremendously by NAKing the unexpectedly
* early status stage. Also, retry on all errors;
* some devices are flakey.
+ * 255 is for WUSB devices, we actually need to use 512.
+ * WUSB1.0[4.8.1].
*/
for (j = 0; j < 3; ++j) {
buf->bMaxPacketSize0 = 0;
@@ -2326,7 +2158,7 @@
buf, GET_DESCRIPTOR_BUFSIZE,
(i ? USB_CTRL_GET_TIMEOUT : 1000));
switch (buf->bMaxPacketSize0) {
- case 8: case 16: case 32: case 64:
+ case 8: case 16: case 32: case 64: case 255:
if (buf->bDescriptorType ==
USB_DT_DEVICE) {
r = 0;
@@ -2400,7 +2232,8 @@
if (retval)
goto fail;
- i = udev->descriptor.bMaxPacketSize0;
+ i = udev->descriptor.bMaxPacketSize0 == 0xff?
+ 512 : udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
@@ -2585,6 +2418,7 @@
usb_set_device_state(udev, USB_STATE_POWERED);
udev->speed = USB_SPEED_UNKNOWN;
udev->bus_mA = hub->mA_per_port;
+ udev->level = hdev->level + 1;
/* set the address */
choose_address(udev);
@@ -2736,17 +2570,6 @@
usb_get_intf(intf);
spin_unlock_irq(&hub_event_lock);
- /* Is this is a root hub wanting to reactivate the downstream
- * ports? If so, be sure the interface resumes even if its
- * stub "device" node was never suspended.
- */
- if (i) {
- dpm_runtime_resume(&hdev->dev);
- dpm_runtime_resume(&intf->dev);
- usb_put_intf(intf);
- continue;
- }
-
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
if (locktree(hdev) < 0) {
@@ -2763,6 +2586,13 @@
goto loop;
}
+ /* Is this is a root hub wanting to reactivate the downstream
+ * ports? If so, be sure the interface resumes even if its
+ * stub "device" node was never suspended.
+ */
+ if (i)
+ usb_autoresume_device(hdev, 0);
+
/* If this is an inactive or suspended hub, do nothing */
if (hub->quiescing)
goto loop;
@@ -2900,7 +2730,7 @@
/* If this is a root hub, tell the HCD it's okay to
* re-enable port-change interrupts now. */
- if (!hdev->parent)
+ if (!hdev->parent && !hub->busy_bits[0])
usb_enable_root_hub_irq(hdev->bus);
loop:
@@ -3075,6 +2905,9 @@
break;
}
clear_bit(port1, parent_hub->busy_bits);
+ if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+ usb_enable_root_hub_irq(parent_hdev->bus);
+
if (ret < 0)
goto re_enumerate;
@@ -3128,6 +2961,7 @@
hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
}
+EXPORT_SYMBOL(usb_reset_device);
/**
* usb_reset_composite_device - warn interface drivers and perform a USB port reset
@@ -3163,6 +2997,9 @@
return -EINVAL;
}
+ /* Prevent autosuspend during the reset */
+ usb_autoresume_device(udev, 1);
+
if (iface && iface->condition != USB_INTERFACE_BINDING)
iface = NULL;
@@ -3204,5 +3041,7 @@
}
}
+ usb_autosuspend_device(udev, 1);
return ret;
}
+EXPORT_SYMBOL(usb_reset_composite_device);
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 29d5f45..0f8e82a 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -212,7 +212,8 @@
unsigned long event_bits[1]; /* status change bitmask */
unsigned long change_bits[1]; /* ports with logical connect
status change */
- unsigned long busy_bits[1]; /* ports being reset */
+ unsigned long busy_bits[1]; /* ports being reset or
+ resumed */
#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
#error event_bits[] is too short!
#endif
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 3182c22..df3d152 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -44,7 +44,7 @@
#include "hcd.h"
static struct super_operations usbfs_ops;
-static struct file_operations default_file_operations;
+static const struct file_operations default_file_operations;
static struct vfsmount *usbfs_mount;
static int usbfs_mount_count; /* = 0 */
static int ignore_mount = 0;
@@ -249,7 +249,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
switch (mode & S_IFMT) {
@@ -402,13 +401,13 @@
static int default_open (struct inode *inode, struct file *file)
{
- if (inode->u.generic_ip)
- file->private_data = inode->u.generic_ip;
+ if (inode->i_private)
+ file->private_data = inode->i_private;
return 0;
}
-static struct file_operations default_file_operations = {
+static const struct file_operations default_file_operations = {
.read = default_read_file,
.write = default_write_file,
.open = default_open,
@@ -495,7 +494,7 @@
static struct dentry *fs_create_file (const char *name, mode_t mode,
struct dentry *parent, void *data,
- struct file_operations *fops,
+ const struct file_operations *fops,
uid_t uid, gid_t gid)
{
struct dentry *dentry;
@@ -509,7 +508,7 @@
} else {
if (dentry->d_inode) {
if (data)
- dentry->d_inode->u.generic_ip = data;
+ dentry->d_inode->i_private = data;
if (fops)
dentry->d_inode->i_fop = fops;
dentry->d_inode->i_uid = uid;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 4cc8d3e..85b1cd1 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -23,59 +23,44 @@
}
-static void timeout_kill(unsigned long data)
-{
- struct urb *urb = (struct urb *) data;
-
- usb_unlink_urb(urb);
-}
-
-// Starts urb and waits for completion or timeout
-// note that this call is NOT interruptible, while
-// many device driver i/o requests should be interruptible
-static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
+/*
+ * Starts urb and waits for completion or timeout. Note that this call
+ * is NOT interruptible. Many device driver i/o requests should be
+ * interruptible and therefore these drivers should implement their
+ * own interruptible routines.
+ */
+static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length)
{
- struct completion done;
- struct timer_list timer;
- int status;
+ struct completion done;
+ unsigned long expire;
+ int status;
init_completion(&done);
urb->context = &done;
urb->actual_length = 0;
status = usb_submit_urb(urb, GFP_NOIO);
+ if (unlikely(status))
+ goto out;
- if (status == 0) {
- if (timeout > 0) {
- init_timer(&timer);
- timer.expires = jiffies + msecs_to_jiffies(timeout);
- timer.data = (unsigned long)urb;
- timer.function = timeout_kill;
- /* grr. timeout _should_ include submit delays. */
- add_timer(&timer);
- }
- wait_for_completion(&done);
+ expire = timeout ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT;
+ if (!wait_for_completion_timeout(&done, expire)) {
+
+ dev_dbg(&urb->dev->dev,
+ "%s timed out on ep%d%s len=%d/%d\n",
+ current->comm,
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out",
+ urb->actual_length,
+ urb->transfer_buffer_length);
+
+ usb_kill_urb(urb);
+ status = urb->status == -ENOENT ? -ETIMEDOUT : urb->status;
+ } else
status = urb->status;
- /* note: HCDs return ETIMEDOUT for other reasons too */
- if (status == -ECONNRESET) {
- dev_dbg(&urb->dev->dev,
- "%s timed out on ep%d%s len=%d/%d\n",
- current->comm,
- usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out",
- urb->actual_length,
- urb->transfer_buffer_length
- );
- if (urb->actual_length > 0)
- status = 0;
- else
- status = -ETIMEDOUT;
- }
- if (timeout > 0)
- del_timer_sync(&timer);
- }
-
+out:
if (actual_length)
*actual_length = urb->actual_length;
+
usb_free_urb(urb);
return status;
}
@@ -263,7 +248,7 @@
static void sg_complete (struct urb *urb, struct pt_regs *regs)
{
- struct usb_sg_request *io = (struct usb_sg_request *) urb->context;
+ struct usb_sg_request *io = urb->context;
spin_lock (&io->lock);
@@ -999,8 +984,8 @@
ep = dev->ep_in[epnum];
dev->ep_in[epnum] = NULL;
}
- if (ep && dev->bus && dev->bus->op && dev->bus->op->disable)
- dev->bus->op->disable(dev, ep);
+ if (ep && dev->bus)
+ usb_hcd_endpoint_disable(dev, ep);
}
/**
@@ -1381,9 +1366,6 @@
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
- if (dev->state == USB_STATE_SUSPENDED)
- return -EHOSTUNREACH;
-
/* Allocate memory for new interfaces before doing anything else,
* so that if we run out then nothing will have changed. */
n = nintf = 0;
@@ -1418,6 +1400,11 @@
configuration, -i);
}
+ /* Wake up the device so we can send it the Set-Config request */
+ ret = usb_autoresume_device(dev, 1);
+ if (ret)
+ goto free_interfaces;
+
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
@@ -1437,6 +1424,7 @@
dev->actconfig = cp;
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
+ usb_autosuspend_device(dev, 1);
goto free_interfaces;
}
usb_set_device_state(dev, USB_STATE_CONFIGURED);
@@ -1505,9 +1493,69 @@
usb_create_sysfs_intf_files (intf);
}
+ usb_autosuspend_device(dev, 1);
return 0;
}
+struct set_config_request {
+ struct usb_device *udev;
+ int config;
+ struct work_struct work;
+};
+
+/* Worker routine for usb_driver_set_configuration() */
+static void driver_set_config_work(void *_req)
+{
+ struct set_config_request *req = _req;
+
+ usb_lock_device(req->udev);
+ usb_set_configuration(req->udev, req->config);
+ usb_unlock_device(req->udev);
+ usb_put_dev(req->udev);
+ kfree(req);
+}
+
+/**
+ * usb_driver_set_configuration - Provide a way for drivers to change device configurations
+ * @udev: the device whose configuration is being updated
+ * @config: the configuration being chosen.
+ * Context: In process context, must be able to sleep
+ *
+ * Device interface drivers are not allowed to change device configurations.
+ * This is because changing configurations will destroy the interface the
+ * driver is bound to and create new ones; it would be like a floppy-disk
+ * driver telling the computer to replace the floppy-disk drive with a
+ * tape drive!
+ *
+ * Still, in certain specialized circumstances the need may arise. This
+ * routine gets around the normal restrictions by using a work thread to
+ * submit the change-config request.
+ *
+ * Returns 0 if the request was succesfully queued, error code otherwise.
+ * The caller has no way to know whether the queued request will eventually
+ * succeed.
+ */
+int usb_driver_set_configuration(struct usb_device *udev, int config)
+{
+ struct set_config_request *req;
+
+ req = kmalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+ req->udev = udev;
+ req->config = config;
+ INIT_WORK(&req->work, driver_set_config_work, req);
+
+ usb_get_dev(udev);
+ if (!schedule_work(&req->work)) {
+ usb_put_dev(udev);
+ kfree(req);
+ return -EINVAL;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_driver_set_configuration);
+
// synchronous request completion model
EXPORT_SYMBOL(usb_control_msg);
EXPORT_SYMBOL(usb_bulk_msg);
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
index b042676..6b36897 100644
--- a/drivers/usb/core/notify.c
+++ b/drivers/usb/core/notify.c
@@ -50,8 +50,11 @@
void usb_notify_remove_device(struct usb_device *udev)
{
+ /* Protect against simultaneous usbfs open */
+ mutex_lock(&usbfs_mutex);
blocking_notifier_call_chain(&usb_notifier_list,
USB_DEVICE_REMOVE, udev);
+ mutex_unlock(&usbfs_mutex);
}
void usb_notify_add_bus(struct usb_bus *ubus)
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index dec973a..55d8f57 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -60,7 +60,7 @@
set_bConfigurationValue (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct usb_device *udev = udev = to_usb_device (dev);
+ struct usb_device *udev = to_usb_device (dev);
int config, value;
if (sscanf (buf, "%u", &config) != 1 || config > 255)
@@ -186,6 +186,7 @@
static struct attribute *dev_attrs[] = {
/* current configuration's attributes */
+ &dev_attr_configuration.attr,
&dev_attr_bNumInterfaces.attr,
&dev_attr_bConfigurationValue.attr,
&dev_attr_bmAttributes.attr,
@@ -209,20 +210,40 @@
.attrs = dev_attrs,
};
-void usb_create_sysfs_dev_files (struct usb_device *udev)
+int usb_create_sysfs_dev_files(struct usb_device *udev)
{
struct device *dev = &udev->dev;
+ int retval;
- sysfs_create_group(&dev->kobj, &dev_attr_grp);
+ retval = sysfs_create_group(&dev->kobj, &dev_attr_grp);
+ if (retval)
+ return retval;
- if (udev->manufacturer)
- device_create_file (dev, &dev_attr_manufacturer);
- if (udev->product)
- device_create_file (dev, &dev_attr_product);
- if (udev->serial)
- device_create_file (dev, &dev_attr_serial);
- device_create_file (dev, &dev_attr_configuration);
- usb_create_ep_files(dev, &udev->ep0, udev);
+ if (udev->manufacturer) {
+ retval = device_create_file (dev, &dev_attr_manufacturer);
+ if (retval)
+ goto error;
+ }
+ if (udev->product) {
+ retval = device_create_file (dev, &dev_attr_product);
+ if (retval)
+ goto error;
+ }
+ if (udev->serial) {
+ retval = device_create_file (dev, &dev_attr_serial);
+ if (retval)
+ goto error;
+ }
+ retval = usb_create_ep_files(dev, &udev->ep0, udev);
+ if (retval)
+ goto error;
+ return 0;
+error:
+ usb_remove_ep_files(&udev->ep0);
+ device_remove_file(dev, &dev_attr_manufacturer);
+ device_remove_file(dev, &dev_attr_product);
+ device_remove_file(dev, &dev_attr_serial);
+ return retval;
}
void usb_remove_sysfs_dev_files (struct usb_device *udev)
@@ -238,7 +259,6 @@
device_remove_file(dev, &dev_attr_product);
if (udev->serial)
device_remove_file(dev, &dev_attr_serial);
- device_remove_file (dev, &dev_attr_configuration);
}
/* Interface fields */
@@ -340,18 +360,28 @@
usb_remove_ep_files(&iface_desc->endpoint[i]);
}
-void usb_create_sysfs_intf_files (struct usb_interface *intf)
+int usb_create_sysfs_intf_files(struct usb_interface *intf)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_host_interface *alt = intf->cur_altsetting;
+ int retval;
- sysfs_create_group(&intf->dev.kobj, &intf_attr_grp);
+ retval = sysfs_create_group(&intf->dev.kobj, &intf_attr_grp);
+ if (retval)
+ goto error;
if (alt->string == NULL)
alt->string = usb_cache_string(udev, alt->desc.iInterface);
if (alt->string)
- device_create_file(&intf->dev, &dev_attr_interface);
+ retval = device_create_file(&intf->dev, &dev_attr_interface);
usb_create_intf_ep_files(intf, udev);
+ return 0;
+error:
+ if (alt->string)
+ device_remove_file(&intf->dev, &dev_attr_interface);
+ sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp);
+ usb_remove_intf_ep_files(intf);
+ return retval;
}
void usb_remove_sysfs_intf_files (struct usb_interface *intf)
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 9864988..9801d08e 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -57,7 +57,7 @@
{
struct urb *urb;
- urb = (struct urb *)kmalloc(sizeof(struct urb) +
+ urb = kmalloc(sizeof(struct urb) +
iso_packets * sizeof(struct usb_iso_packet_descriptor),
mem_flags);
if (!urb) {
@@ -221,7 +221,6 @@
{
int pipe, temp, max;
struct usb_device *dev;
- struct usb_operations *op;
int is_out;
if (!urb || urb->hcpriv || !urb->complete)
@@ -233,8 +232,6 @@
if (dev->bus->controller->power.power_state.event != PM_EVENT_ON
|| dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
- if (!(op = dev->bus->op) || !op->submit_urb)
- return -ENODEV;
urb->status = -EINPROGRESS;
urb->actual_length = 0;
@@ -376,7 +373,7 @@
urb->interval = temp;
}
- return op->submit_urb (urb, mem_flags);
+ return usb_hcd_submit_urb (urb, mem_flags);
}
/*-------------------------------------------------------------------*/
@@ -440,9 +437,9 @@
{
if (!urb)
return -EINVAL;
- if (!(urb->dev && urb->dev->bus && urb->dev->bus->op))
+ if (!(urb->dev && urb->dev->bus))
return -ENODEV;
- return urb->dev->bus->op->unlink_urb(urb, -ECONNRESET);
+ return usb_hcd_unlink_urb(urb, -ECONNRESET);
}
/**
@@ -468,13 +465,13 @@
void usb_kill_urb(struct urb *urb)
{
might_sleep();
- if (!(urb && urb->dev && urb->dev->bus && urb->dev->bus->op))
+ if (!(urb && urb->dev && urb->dev->bus))
return;
spin_lock_irq(&urb->lock);
++urb->reject;
spin_unlock_irq(&urb->lock);
- urb->dev->bus->op->unlink_urb(urb, -ENOENT);
+ usb_hcd_unlink_urb(urb, -ENOENT);
wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
spin_lock_irq(&urb->lock);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 184c246..60ef4ef 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -67,7 +67,8 @@
* Don't call this function unless you are bound to one of the interfaces
* on this device or you have locked the device!
*/
-struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum)
+struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
+ unsigned ifnum)
{
struct usb_host_config *config = dev->actconfig;
int i;
@@ -100,8 +101,8 @@
* Don't call this function unless you are bound to the intf interface
* or you have locked the device!
*/
-struct usb_host_interface *usb_altnum_to_altsetting(struct usb_interface *intf,
- unsigned int altnum)
+struct usb_host_interface *usb_altnum_to_altsetting(const struct usb_interface *intf,
+ unsigned int altnum)
{
int i;
@@ -112,87 +113,6 @@
return NULL;
}
-/**
- * usb_driver_claim_interface - bind a driver to an interface
- * @driver: the driver to be bound
- * @iface: the interface to which it will be bound; must be in the
- * usb device's active configuration
- * @priv: driver data associated with that interface
- *
- * This is used by usb device drivers that need to claim more than one
- * interface on a device when probing (audio and acm are current examples).
- * No device driver should directly modify internal usb_interface or
- * usb_device structure members.
- *
- * Few drivers should need to use this routine, since the most natural
- * way to bind to an interface is to return the private data from
- * the driver's probe() method.
- *
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver probe() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
- */
-int usb_driver_claim_interface(struct usb_driver *driver,
- struct usb_interface *iface, void* priv)
-{
- struct device *dev = &iface->dev;
-
- if (dev->driver)
- return -EBUSY;
-
- dev->driver = &driver->driver;
- usb_set_intfdata(iface, priv);
- iface->condition = USB_INTERFACE_BOUND;
- mark_active(iface);
-
- /* if interface was already added, bind now; else let
- * the future device_add() bind it, bypassing probe()
- */
- if (device_is_registered(dev))
- device_bind_driver(dev);
-
- return 0;
-}
-
-/**
- * usb_driver_release_interface - unbind a driver from an interface
- * @driver: the driver to be unbound
- * @iface: the interface from which it will be unbound
- *
- * This can be used by drivers to release an interface without waiting
- * for their disconnect() methods to be called. In typical cases this
- * also causes the driver disconnect() method to be called.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver disconnect() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
- */
-void usb_driver_release_interface(struct usb_driver *driver,
- struct usb_interface *iface)
-{
- struct device *dev = &iface->dev;
-
- /* this should never happen, don't release something that's not ours */
- if (!dev->driver || dev->driver != &driver->driver)
- return;
-
- /* don't release from within disconnect() */
- if (iface->condition != USB_INTERFACE_BOUND)
- return;
-
- /* don't release if the interface hasn't been added yet */
- if (device_is_registered(dev)) {
- iface->condition = USB_INTERFACE_UNBINDING;
- device_release_driver(dev);
- }
-
- dev->driver = NULL;
- usb_set_intfdata(iface, NULL);
- iface->condition = USB_INTERFACE_UNBOUND;
- mark_quiesced(iface);
-}
-
struct find_interface_arg {
int minor;
struct usb_interface *interface;
@@ -204,7 +124,7 @@
struct usb_interface *intf;
/* can't look at usb devices, only interfaces */
- if (dev->driver == &usb_generic_driver)
+ if (is_usb_device(dev))
return 0;
intf = to_usb_interface(dev);
@@ -227,127 +147,16 @@
struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
{
struct find_interface_arg argb;
+ int retval;
argb.minor = minor;
argb.interface = NULL;
- driver_for_each_device(&drv->driver, NULL, &argb, __find_interface);
+ /* eat the error, it will be in argb.interface */
+ retval = driver_for_each_device(&drv->drvwrap.driver, NULL, &argb,
+ __find_interface);
return argb.interface;
}
-#ifdef CONFIG_HOTPLUG
-
-/*
- * This sends an uevent to userspace, typically helping to load driver
- * or other modules, configure the device, and more. Drivers can provide
- * a MODULE_DEVICE_TABLE to help with module loading subtasks.
- *
- * We're called either from khubd (the typical case) or from root hub
- * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle
- * delays in event delivery. Use sysfs (and DEVPATH) to make sure the
- * device (and this configuration!) are still present.
- */
-static int usb_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
-{
- struct usb_interface *intf;
- struct usb_device *usb_dev;
- struct usb_host_interface *alt;
- int i = 0;
- int length = 0;
-
- if (!dev)
- return -ENODEV;
-
- /* driver is often null here; dev_dbg() would oops */
- pr_debug ("usb %s: uevent\n", dev->bus_id);
-
- /* Must check driver_data here, as on remove driver is always NULL */
- if ((dev->driver == &usb_generic_driver) ||
- (dev->driver_data == &usb_generic_driver_data))
- return 0;
-
- intf = to_usb_interface(dev);
- usb_dev = interface_to_usbdev (intf);
- alt = intf->cur_altsetting;
-
- if (usb_dev->devnum < 0) {
- pr_debug ("usb %s: already deleted?\n", dev->bus_id);
- return -ENODEV;
- }
- if (!usb_dev->bus) {
- pr_debug ("usb %s: bus removed?\n", dev->bus_id);
- return -ENODEV;
- }
-
-#ifdef CONFIG_USB_DEVICEFS
- /* If this is available, userspace programs can directly read
- * all the device descriptors we don't tell them about. Or
- * even act as usermode drivers.
- *
- * FIXME reduce hardwired intelligence here
- */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "DEVICE=/proc/bus/usb/%03d/%03d",
- usb_dev->bus->busnum, usb_dev->devnum))
- return -ENOMEM;
-#endif
-
- /* per-device configurations are common */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "PRODUCT=%x/%x/%x",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice)))
- return -ENOMEM;
-
- /* class-based driver binding models */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "TYPE=%d/%d/%d",
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- envp[i] = NULL;
-
- return 0;
-}
-
-#else
-
-static int usb_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
-{
- return -ENODEV;
-}
-
-#endif /* CONFIG_HOTPLUG */
-
/**
* usb_release_dev - free a usb device structure when all users of it are finished.
* @dev: device that's been disconnected
@@ -361,14 +170,33 @@
udev = to_usb_device(dev);
+#ifdef CONFIG_PM
+ cancel_delayed_work(&udev->autosuspend);
+ flush_scheduled_work();
+#endif
usb_destroy_configuration(udev);
- usb_bus_put(udev->bus);
+ usb_put_hcd(bus_to_hcd(udev->bus));
kfree(udev->product);
kfree(udev->manufacturer);
kfree(udev->serial);
kfree(udev);
}
+#ifdef CONFIG_PM
+
+/* usb_autosuspend_work - callback routine to autosuspend a USB device */
+static void usb_autosuspend_work(void *_udev)
+{
+ struct usb_device *udev = _udev;
+
+ mutex_lock_nested(&udev->pm_mutex, udev->level);
+ udev->auto_pm = 1;
+ usb_suspend_both(udev, PMSG_SUSPEND);
+ mutex_unlock(&udev->pm_mutex);
+}
+
+#endif
+
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
* @parent: hub to which device is connected; null to allocate a root hub
@@ -390,8 +218,7 @@
if (!dev)
return NULL;
- bus = usb_bus_get(bus);
- if (!bus) {
+ if (!usb_get_hcd(bus_to_hcd(bus))) {
kfree(dev);
return NULL;
}
@@ -399,11 +226,12 @@
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.dma_mask = bus->controller->dma_mask;
- dev->dev.driver_data = &usb_generic_driver_data;
- dev->dev.driver = &usb_generic_driver;
dev->dev.release = usb_release_dev;
dev->state = USB_STATE_ATTACHED;
+ /* This magic assignment distinguishes devices from interfaces */
+ dev->dev.platform_data = &usb_generic_driver;
+
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
@@ -444,6 +272,10 @@
dev->parent = parent;
INIT_LIST_HEAD(&dev->filelist);
+#ifdef CONFIG_PM
+ mutex_init(&dev->pm_mutex);
+ INIT_WORK(&dev->autosuspend, usb_autosuspend_work, dev);
+#endif
return dev;
}
@@ -549,7 +381,7 @@
* case the driver already owns the device lock.)
*/
int usb_lock_device_for_reset(struct usb_device *udev,
- struct usb_interface *iface)
+ const struct usb_interface *iface)
{
unsigned long jiffies_expire = jiffies + HZ;
@@ -672,7 +504,139 @@
*/
int usb_get_current_frame_number(struct usb_device *dev)
{
- return dev->bus->op->get_frame_number (dev);
+ return usb_hcd_get_frame_number (dev);
+}
+
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
}
/*-------------------------------------------------------------------*/
@@ -737,9 +701,9 @@
dma_addr_t *dma
)
{
- if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_alloc)
+ if (!dev || !dev->bus)
return NULL;
- return dev->bus->op->buffer_alloc (dev->bus, size, mem_flags, dma);
+ return hcd_buffer_alloc (dev->bus, size, mem_flags, dma);
}
/**
@@ -760,9 +724,11 @@
dma_addr_t dma
)
{
- if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_free)
- return;
- dev->bus->op->buffer_free (dev->bus, size, addr, dma);
+ if (!dev || !dev->bus)
+ return;
+ if (!addr)
+ return;
+ hcd_buffer_free (dev->bus, size, addr, dma);
}
/**
@@ -911,8 +877,8 @@
*
* Reverse the effect of this call with usb_buffer_unmap_sg().
*/
-int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int nents)
+int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int nents)
{
struct usb_bus *bus;
struct device *controller;
@@ -946,8 +912,8 @@
* Use this when you are re-using a scatterlist's data buffers for
* another USB request.
*/
-void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents)
+void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
struct device *controller;
@@ -972,8 +938,8 @@
*
* Reverses the effect of usb_buffer_map_sg().
*/
-void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents)
+void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
struct device *controller;
@@ -988,116 +954,6 @@
usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
-static int verify_suspended(struct device *dev, void *unused)
-{
- if (dev->driver == NULL)
- return 0;
- return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0;
-}
-
-static int usb_generic_suspend(struct device *dev, pm_message_t message)
-{
- struct usb_interface *intf;
- struct usb_driver *driver;
- int status;
-
- /* USB devices enter SUSPEND state through their hubs, but can be
- * marked for FREEZE as soon as their children are already idled.
- * But those semantics are useless, so we equate the two (sigh).
- */
- if (dev->driver == &usb_generic_driver) {
- if (dev->power.power_state.event == message.event)
- return 0;
- /* we need to rule out bogus requests through sysfs */
- status = device_for_each_child(dev, NULL, verify_suspended);
- if (status)
- return status;
- return usb_suspend_device (to_usb_device(dev));
- }
-
- if ((dev->driver == NULL) ||
- (dev->driver_data == &usb_generic_driver_data))
- return 0;
-
- intf = to_usb_interface(dev);
- driver = to_usb_driver(dev->driver);
-
- /* with no hardware, USB interfaces only use FREEZE and ON states */
- if (!is_active(intf))
- return 0;
-
- if (driver->suspend && driver->resume) {
- status = driver->suspend(intf, message);
- if (status)
- dev_err(dev, "%s error %d\n", "suspend", status);
- else
- mark_quiesced(intf);
- } else {
- // FIXME else if there's no suspend method, disconnect...
- dev_warn(dev, "no suspend for driver %s?\n", driver->name);
- mark_quiesced(intf);
- status = 0;
- }
- return status;
-}
-
-static int usb_generic_resume(struct device *dev)
-{
- struct usb_interface *intf;
- struct usb_driver *driver;
- struct usb_device *udev;
- int status;
-
- if (dev->power.power_state.event == PM_EVENT_ON)
- return 0;
-
- /* mark things as "on" immediately, no matter what errors crop up */
- dev->power.power_state.event = PM_EVENT_ON;
-
- /* devices resume through their hubs */
- if (dev->driver == &usb_generic_driver) {
- udev = to_usb_device(dev);
- if (udev->state == USB_STATE_NOTATTACHED)
- return 0;
- return usb_resume_device (to_usb_device(dev));
- }
-
- if ((dev->driver == NULL) ||
- (dev->driver_data == &usb_generic_driver_data)) {
- dev->power.power_state.event = PM_EVENT_FREEZE;
- return 0;
- }
-
- intf = to_usb_interface(dev);
- driver = to_usb_driver(dev->driver);
-
- udev = interface_to_usbdev(intf);
- if (udev->state == USB_STATE_NOTATTACHED)
- return 0;
-
- /* if driver was suspended, it has a resume method;
- * however, sysfs can wrongly mark things as suspended
- * (on the "no suspend method" FIXME path above)
- */
- if (driver->resume) {
- status = driver->resume(intf);
- if (status) {
- dev_err(dev, "%s error %d\n", "resume", status);
- mark_quiesced(intf);
- }
- } else
- dev_warn(dev, "no resume for driver %s?\n", driver->name);
- return 0;
-}
-
-struct bus_type usb_bus_type = {
- .name = "usb",
- .match = usb_device_match,
- .uevent = usb_uevent,
- .suspend = usb_generic_suspend,
- .resume = usb_generic_resume,
-};
-
/* format to disable USB on kernel command line is: nousb */
__module_param_call("", nousb, param_set_bool, param_get_bool, &nousb, 0444);
@@ -1141,7 +997,7 @@
retval = usb_hub_init();
if (retval)
goto hub_init_failed;
- retval = driver_register(&usb_generic_driver);
+ retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE);
if (!retval)
goto out;
@@ -1171,7 +1027,7 @@
if (nousb)
return;
- driver_unregister(&usb_generic_driver);
+ usb_deregister_device_driver(&usb_generic_driver);
usb_major_cleanup();
usbfs_cleanup();
usb_deregister(&usbfs_driver);
@@ -1201,20 +1057,27 @@
EXPORT_SYMBOL(usb_lock_device_for_reset);
-EXPORT_SYMBOL(usb_driver_claim_interface);
-EXPORT_SYMBOL(usb_driver_release_interface);
EXPORT_SYMBOL(usb_find_interface);
EXPORT_SYMBOL(usb_ifnum_to_if);
EXPORT_SYMBOL(usb_altnum_to_altsetting);
-EXPORT_SYMBOL(usb_reset_device);
-EXPORT_SYMBOL(usb_reset_composite_device);
-
EXPORT_SYMBOL(__usb_get_extra_descriptor);
EXPORT_SYMBOL(usb_find_device);
EXPORT_SYMBOL(usb_get_current_frame_number);
+EXPORT_SYMBOL_GPL(usb_endpoint_dir_in);
+EXPORT_SYMBOL_GPL(usb_endpoint_dir_out);
+EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk);
+EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int);
+EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc);
+EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in);
+EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out);
+EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in);
+EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out);
+EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in);
+EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out);
+
EXPORT_SYMBOL (usb_buffer_alloc);
EXPORT_SYMBOL (usb_buffer_free);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 49f6923..0c09ecc 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -1,10 +1,10 @@
/* Functions local to drivers/usb/core/ */
-extern void usb_create_sysfs_dev_files (struct usb_device *dev);
+extern int usb_create_sysfs_dev_files (struct usb_device *dev);
extern void usb_remove_sysfs_dev_files (struct usb_device *dev);
-extern void usb_create_sysfs_intf_files (struct usb_interface *intf);
+extern int usb_create_sysfs_intf_files (struct usb_interface *intf);
extern void usb_remove_sysfs_intf_files (struct usb_interface *intf);
-extern void usb_create_ep_files(struct device *parent, struct usb_host_endpoint *endpoint,
+extern int usb_create_ep_files(struct device *parent, struct usb_host_endpoint *endpoint,
struct usb_device *udev);
extern void usb_remove_ep_files(struct usb_host_endpoint *endpoint);
@@ -20,7 +20,6 @@
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern void usb_kick_khubd(struct usb_device *dev);
-extern void usb_suspend_root_hub(struct usb_device *hdev);
extern void usb_resume_root_hub(struct usb_device *dev);
extern int usb_hub_init(void);
@@ -30,28 +29,74 @@
extern int usb_host_init(void);
extern void usb_host_cleanup(void);
-extern int usb_suspend_device(struct usb_device *dev);
-extern int usb_resume_device(struct usb_device *dev);
+#ifdef CONFIG_PM
-extern struct device_driver usb_generic_driver;
-extern int usb_generic_driver_data;
-extern int usb_device_match(struct device *dev, struct device_driver *drv);
+extern int usb_suspend_both(struct usb_device *udev, pm_message_t msg);
+extern int usb_resume_both(struct usb_device *udev);
+extern int usb_port_suspend(struct usb_device *dev);
+extern int usb_port_resume(struct usb_device *dev);
+
+#else
+
+#define usb_suspend_both(udev, msg) 0
+static inline int usb_resume_both(struct usb_device *udev)
+{
+ return 0;
+}
+#define usb_port_suspend(dev) 0
+#define usb_port_resume(dev) 0
+
+#endif
+
+#ifdef CONFIG_USB_SUSPEND
+
+#define USB_AUTOSUSPEND_DELAY (HZ*2)
+
+extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt);
+extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt);
+
+#else
+
+#define usb_autosuspend_device(udev, dec_busy_cnt) do {} while (0)
+#define usb_autoresume_device(udev, inc_busy_cnt) 0
+
+#endif
+
+extern struct bus_type usb_bus_type;
+extern struct usb_device_driver usb_generic_driver;
+
+/* Here's how we tell apart devices and interfaces. Luckily there's
+ * no such thing as a platform USB device, so we can steal the use
+ * of the platform_data field. */
+
+static inline int is_usb_device(const struct device *dev)
+{
+ return dev->platform_data == &usb_generic_driver;
+}
+
+/* Do the same for device drivers and interface drivers. */
+
+static inline int is_usb_device_driver(struct device_driver *drv)
+{
+ return container_of(drv, struct usbdrv_wrap, driver)->
+ for_devices;
+}
/* Interfaces and their "power state" are owned by usbcore */
static inline void mark_active(struct usb_interface *f)
{
- f->dev.power.power_state.event = PM_EVENT_ON;
+ f->is_active = 1;
}
static inline void mark_quiesced(struct usb_interface *f)
{
- f->dev.power.power_state.event = PM_EVENT_FREEZE;
+ f->is_active = 0;
}
-static inline int is_active(struct usb_interface *f)
+static inline int is_active(const struct usb_interface *f)
{
- return f->dev.power.power_state.event == PM_EVENT_ON;
+ return f->is_active;
}
@@ -59,9 +104,10 @@
extern const char *usbcore_name;
/* usbfs stuff */
+extern struct mutex usbfs_mutex;
extern struct usb_driver usbfs_driver;
-extern struct file_operations usbfs_devices_fops;
-extern struct file_operations usbfs_device_file_operations;
+extern const struct file_operations usbfs_devices_fops;
+extern const struct file_operations usbfs_device_file_operations;
extern void usbfs_conn_disc_event(void);
extern int usbdev_init(void);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 1a32d96..8e5dd6f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -26,7 +26,7 @@
you need a low level bus controller driver, and some software
talking to it. Peripheral controllers are often discrete silicon,
or are integrated with the CPU in a microcontroller. The more
- familiar host side controllers have names like like "EHCI", "OHCI",
+ familiar host side controllers have names like "EHCI", "OHCI",
or "UHCI", and are usually integrated into southbridges on PC
motherboards.
@@ -404,6 +404,20 @@
which includes instructions and a "driver info file" needed to
make MS-Windows work with this driver.
+config USB_MIDI_GADGET
+ tristate "MIDI Gadget (EXPERIMENTAL)"
+ depends on SND && EXPERIMENTAL
+ select SND_RAWMIDI
+ help
+ The MIDI Gadget acts as a USB Audio device, with one MIDI
+ input and one MIDI output. These MIDI jacks appear as
+ a sound "card" in the ALSA sound system. Other MIDI
+ connections can then be made on the gadget system, using
+ ALSA's aconnect utility etc.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_midi".
+
# put drivers that need isochronous transfer support (for audio
# or video class gadget drivers), or specific hardware, here.
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 5a28e613..e71e086 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -15,6 +15,7 @@
g_zero-objs := zero.o usbstring.o config.o epautoconf.o
g_ether-objs := ether.o usbstring.o config.o epautoconf.o
g_serial-objs := serial.o usbstring.o config.o epautoconf.o
+g_midi-objs := gmidi.o usbstring.o config.o epautoconf.o
gadgetfs-objs := inode.o
g_file_storage-objs := file_storage.o usbstring.o config.o \
epautoconf.o
@@ -28,4 +29,5 @@
obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
+obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index cfebca0..d00958a 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -247,7 +247,7 @@
return single_open(file, proc_udc_show, PDE(inode)->data);
}
-static struct file_operations proc_ops = {
+static const struct file_operations proc_ops = {
.open = proc_udc_open,
.read = seq_read,
.llseek = seq_lseek,
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 7d1c22c..fdab97a 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -889,11 +889,9 @@
static void
dummy_gadget_release (struct device *dev)
{
-#if 0 /* usb_bus_put isn't EXPORTed! */
struct dummy *dum = gadget_dev_to_dummy (dev);
- usb_bus_put (&dummy_to_hcd (dum)->self);
-#endif
+ usb_put_hcd (dummy_to_hcd (dum));
}
static int dummy_udc_probe (struct platform_device *pdev)
@@ -915,9 +913,7 @@
if (rc < 0)
return rc;
-#if 0 /* usb_bus_get isn't EXPORTed! */
- usb_bus_get (&dummy_to_hcd (dum)->self);
-#endif
+ usb_get_hcd (dummy_to_hcd (dum));
platform_set_drvdata (pdev, dum);
device_create_file (&dum->gadget.dev, &dev_attr_function);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 30299c6..366dc0a 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -262,7 +262,7 @@
#define DEV_CONFIG_CDC
#endif
-#ifdef CONFIG_USB_GADGET_MUSBHDRC
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
#define DEV_CONFIG_CDC
#endif
@@ -2014,7 +2014,7 @@
static int rndis_control_ack (struct net_device *net)
{
struct eth_dev *dev = netdev_priv(net);
- u32 length;
+ int length;
struct usb_request *resp = dev->stat_req;
/* in case RNDIS calls this after disconnect */
@@ -2230,6 +2230,9 @@
if (gadget_is_pxa (gadget)) {
/* pxa doesn't support altsettings */
cdc = 0;
+ } else if (gadget_is_musbhdrc(gadget)) {
+ /* reduce tx dma overhead by avoiding special cases */
+ zlp = 0;
} else if (gadget_is_sh(gadget)) {
/* sh doesn't support multiple interfaces or configs */
cdc = 0;
@@ -2564,7 +2567,7 @@
.function = (char *) driver_desc,
.bind = eth_bind,
- .unbind = __exit_p(eth_unbind),
+ .unbind = eth_unbind,
.setup = eth_setup,
.disconnect = eth_disconnect,
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
new file mode 100644
index 0000000..b68cecd
--- /dev/null
+++ b/drivers/usb/gadget/gmidi.c
@@ -0,0 +1,1337 @@
+/*
+ * gmidi.c -- USB MIDI Gadget Driver
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This code is based in part on:
+ *
+ * Gadget Zero driver, Copyright (C) 2003-2004 David Brownell.
+ * USB Audio driver, Copyright (C) 2002 by Takashi Iwai.
+ * USB MIDI driver, Copyright (C) 2002-2005 Clemens Ladisch.
+ *
+ * Refer to the USB Device Class Definition for MIDI Devices:
+ * http://www.usb.org/developers/devclass_docs/midi10.pdf
+ */
+
+#define DEBUG 1
+// #define VERBOSE
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/midi.h>
+
+#include "gadget_chips.h"
+
+MODULE_AUTHOR("Ben Williamson");
+MODULE_LICENSE("GPL v2");
+
+#define DRIVER_VERSION "25 Jul 2006"
+
+static const char shortname[] = "g_midi";
+static const char longname[] = "MIDI Gadget";
+
+static int index = SNDRV_DEFAULT_IDX1;
+static char *id = SNDRV_DEFAULT_STR1;
+
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
+
+/* Some systems will want different product identifers published in the
+ * device descriptor, either numbers or strings or both. These string
+ * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+static ushort idVendor;
+module_param(idVendor, ushort, S_IRUGO);
+MODULE_PARM_DESC(idVendor, "USB Vendor ID");
+
+static ushort idProduct;
+module_param(idProduct, ushort, S_IRUGO);
+MODULE_PARM_DESC(idProduct, "USB Product ID");
+
+static ushort bcdDevice;
+module_param(bcdDevice, ushort, S_IRUGO);
+MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
+
+static char *iManufacturer;
+module_param(iManufacturer, charp, S_IRUGO);
+MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
+
+static char *iProduct;
+module_param(iProduct, charp, S_IRUGO);
+MODULE_PARM_DESC(iProduct, "USB Product string");
+
+static char *iSerialNumber;
+module_param(iSerialNumber, charp, S_IRUGO);
+MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
+
+/*
+ * this version autoconfigures as much as possible,
+ * which is reasonable for most "bulk-only" drivers.
+ */
+static const char *EP_IN_NAME;
+static const char *EP_OUT_NAME;
+
+
+/* big enough to hold our biggest descriptor */
+#define USB_BUFSIZ 256
+
+
+/* This is a gadget, and the IN/OUT naming is from the host's perspective.
+ USB -> OUT endpoint -> rawmidi
+ USB <- IN endpoint <- rawmidi */
+struct gmidi_in_port {
+ struct gmidi_device* dev;
+ int active;
+ uint8_t cable; /* cable number << 4 */
+ uint8_t state;
+#define STATE_UNKNOWN 0
+#define STATE_1PARAM 1
+#define STATE_2PARAM_1 2
+#define STATE_2PARAM_2 3
+#define STATE_SYSEX_0 4
+#define STATE_SYSEX_1 5
+#define STATE_SYSEX_2 6
+ uint8_t data[2];
+};
+
+struct gmidi_device {
+ spinlock_t lock;
+ struct usb_gadget *gadget;
+ struct usb_request *req; /* for control responses */
+ u8 config;
+ struct usb_ep *in_ep, *out_ep;
+ struct snd_card *card;
+ struct snd_rawmidi *rmidi;
+ struct snd_rawmidi_substream *in_substream;
+ struct snd_rawmidi_substream *out_substream;
+
+ /* For the moment we only support one port in
+ each direction, but in_port is kept as a
+ separate struct so we can have more later. */
+ struct gmidi_in_port in_port;
+ unsigned long out_triggered;
+ struct tasklet_struct tasklet;
+};
+
+static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req);
+
+
+#define xprintk(d,level,fmt,args...) \
+ dev_printk(level , &(d)->gadget->dev , fmt , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
+
+static unsigned buflen = 256;
+static unsigned qlen = 32;
+
+module_param(buflen, uint, S_IRUGO);
+module_param(qlen, uint, S_IRUGO);
+
+
+/* Thanks to Grey Innovation for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+#define DRIVER_VENDOR_NUM 0x17b3 /* Grey Innovation */
+#define DRIVER_PRODUCT_NUM 0x0004 /* Linux-USB "MIDI Gadget" */
+
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full)
+ * configuration descriptors are built on demand.
+ */
+
+#define STRING_MANUFACTURER 25
+#define STRING_PRODUCT 42
+#define STRING_SERIAL 101
+#define STRING_MIDI_GADGET 250
+
+/* We only have the one configuration, it's number 1. */
+#define GMIDI_CONFIG 1
+
+/* We have two interfaces- AudioControl and MIDIStreaming */
+#define GMIDI_AC_INTERFACE 0
+#define GMIDI_MS_INTERFACE 1
+#define GMIDI_NUM_INTERFACES 2
+
+DECLARE_USB_AC_HEADER_DESCRIPTOR(1);
+DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
+DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1);
+
+/* B.1 Device Descriptor */
+static struct usb_device_descriptor device_desc = {
+ .bLength = USB_DT_DEVICE_SIZE,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
+ .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
+ .iManufacturer = STRING_MANUFACTURER,
+ .iProduct = STRING_PRODUCT,
+ .bNumConfigurations = 1,
+};
+
+/* B.2 Configuration Descriptor */
+static struct usb_config_descriptor config_desc = {
+ .bLength = USB_DT_CONFIG_SIZE,
+ .bDescriptorType = USB_DT_CONFIG,
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = GMIDI_NUM_INTERFACES,
+ .bConfigurationValue = GMIDI_CONFIG,
+ .iConfiguration = STRING_MIDI_GADGET,
+ /*
+ * FIXME: When embedding this driver in a device,
+ * these need to be set to reflect the actual
+ * power properties of the device. Is it selfpowered?
+ */
+ .bmAttributes = USB_CONFIG_ATT_ONE,
+ .bMaxPower = 1,
+};
+
+/* B.3.1 Standard AC Interface Descriptor */
+static const struct usb_interface_descriptor ac_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GMIDI_AC_INTERFACE,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+ .iInterface = STRING_MIDI_GADGET,
+};
+
+/* B.3.2 Class-Specific AC Interface Descriptor */
+static const struct usb_ac_header_descriptor_1 ac_header_desc = {
+ .bLength = USB_DT_AC_HEADER_SIZE(1),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = USB_MS_HEADER,
+ .bcdADC = __constant_cpu_to_le16(0x0100),
+ .wTotalLength = USB_DT_AC_HEADER_SIZE(1),
+ .bInCollection = 1,
+ .baInterfaceNr = {
+ [0] = GMIDI_MS_INTERFACE,
+ }
+};
+
+/* B.4.1 Standard MS Interface Descriptor */
+static const struct usb_interface_descriptor ms_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GMIDI_MS_INTERFACE,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING,
+ .iInterface = STRING_MIDI_GADGET,
+};
+
+/* B.4.2 Class-Specific MS Interface Descriptor */
+static const struct usb_ms_header_descriptor ms_header_desc = {
+ .bLength = USB_DT_MS_HEADER_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = USB_MS_HEADER,
+ .bcdMSC = __constant_cpu_to_le16(0x0100),
+ .wTotalLength = USB_DT_MS_HEADER_SIZE
+ + 2*USB_DT_MIDI_IN_SIZE
+ + 2*USB_DT_MIDI_OUT_SIZE(1),
+};
+
+#define JACK_IN_EMB 1
+#define JACK_IN_EXT 2
+#define JACK_OUT_EMB 3
+#define JACK_OUT_EXT 4
+
+/* B.4.3 MIDI IN Jack Descriptors */
+static const struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
+ .bLength = USB_DT_MIDI_IN_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = USB_MS_MIDI_IN_JACK,
+ .bJackType = USB_MS_EMBEDDED,
+ .bJackID = JACK_IN_EMB,
+};
+
+static const struct usb_midi_in_jack_descriptor jack_in_ext_desc = {
+ .bLength = USB_DT_MIDI_IN_SIZE,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = USB_MS_MIDI_IN_JACK,
+ .bJackType = USB_MS_EXTERNAL,
+ .bJackID = JACK_IN_EXT,
+};
+
+/* B.4.4 MIDI OUT Jack Descriptors */
+static const struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc = {
+ .bLength = USB_DT_MIDI_OUT_SIZE(1),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK,
+ .bJackType = USB_MS_EMBEDDED,
+ .bJackID = JACK_OUT_EMB,
+ .bNrInputPins = 1,
+ .pins = {
+ [0] = {
+ .baSourceID = JACK_IN_EXT,
+ .baSourcePin = 1,
+ }
+ }
+};
+
+static const struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc = {
+ .bLength = USB_DT_MIDI_OUT_SIZE(1),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK,
+ .bJackType = USB_MS_EXTERNAL,
+ .bJackID = JACK_OUT_EXT,
+ .bNrInputPins = 1,
+ .pins = {
+ [0] = {
+ .baSourceID = JACK_IN_EMB,
+ .baSourcePin = 1,
+ }
+ }
+};
+
+/* B.5.1 Standard Bulk OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_out_desc = {
+ .bLength = USB_DT_ENDPOINT_AUDIO_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+/* B.5.2 Class-specific MS Bulk OUT Endpoint Descriptor */
+static const struct usb_ms_endpoint_descriptor_1 ms_out_desc = {
+ .bLength = USB_DT_MS_ENDPOINT_SIZE(1),
+ .bDescriptorType = USB_DT_CS_ENDPOINT,
+ .bDescriptorSubtype = USB_MS_GENERAL,
+ .bNumEmbMIDIJack = 1,
+ .baAssocJackID = {
+ [0] = JACK_IN_EMB,
+ }
+};
+
+/* B.6.1 Standard Bulk IN Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_in_desc = {
+ .bLength = USB_DT_ENDPOINT_AUDIO_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+/* B.6.2 Class-specific MS Bulk IN Endpoint Descriptor */
+static const struct usb_ms_endpoint_descriptor_1 ms_in_desc = {
+ .bLength = USB_DT_MS_ENDPOINT_SIZE(1),
+ .bDescriptorType = USB_DT_CS_ENDPOINT,
+ .bDescriptorSubtype = USB_MS_GENERAL,
+ .bNumEmbMIDIJack = 1,
+ .baAssocJackID = {
+ [0] = JACK_OUT_EMB,
+ }
+};
+
+static const struct usb_descriptor_header *gmidi_function [] = {
+ (struct usb_descriptor_header *)&ac_interface_desc,
+ (struct usb_descriptor_header *)&ac_header_desc,
+ (struct usb_descriptor_header *)&ms_interface_desc,
+
+ (struct usb_descriptor_header *)&ms_header_desc,
+ (struct usb_descriptor_header *)&jack_in_emb_desc,
+ (struct usb_descriptor_header *)&jack_in_ext_desc,
+ (struct usb_descriptor_header *)&jack_out_emb_desc,
+ (struct usb_descriptor_header *)&jack_out_ext_desc,
+ /* If you add more jacks, update ms_header_desc.wTotalLength */
+
+ (struct usb_descriptor_header *)&bulk_out_desc,
+ (struct usb_descriptor_header *)&ms_out_desc,
+ (struct usb_descriptor_header *)&bulk_in_desc,
+ (struct usb_descriptor_header *)&ms_in_desc,
+ NULL,
+};
+
+static char manufacturer[50];
+static char product_desc[40] = "MIDI Gadget";
+static char serial_number[20];
+
+/* static strings, in UTF-8 */
+static struct usb_string strings [] = {
+ { STRING_MANUFACTURER, manufacturer, },
+ { STRING_PRODUCT, product_desc, },
+ { STRING_SERIAL, serial_number, },
+ { STRING_MIDI_GADGET, longname, },
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab = {
+ .language = 0x0409, /* en-us */
+ .strings = strings,
+};
+
+static int config_buf(struct usb_gadget *gadget,
+ u8 *buf, u8 type, unsigned index)
+{
+ int len;
+
+ /* only one configuration */
+ if (index != 0) {
+ return -EINVAL;
+ }
+ len = usb_gadget_config_buf(&config_desc,
+ buf, USB_BUFSIZ, gmidi_function);
+ if (len < 0) {
+ return len;
+ }
+ ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
+ return len;
+}
+
+static struct usb_request* alloc_ep_req(struct usb_ep *ep, unsigned length)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (req) {
+ req->length = length;
+ req->buf = kmalloc(length, GFP_ATOMIC);
+ if (!req->buf) {
+ usb_ep_free_request(ep, req);
+ req = NULL;
+ }
+ }
+ return req;
+}
+
+static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+{
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+}
+
+static const uint8_t gmidi_cin_length[] = {
+ 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
+};
+
+/*
+ * Receives a chunk of MIDI data.
+ */
+static void gmidi_read_data(struct usb_ep *ep, int cable,
+ uint8_t* data, int length)
+{
+ struct gmidi_device *dev = ep->driver_data;
+ /* cable is ignored, because for now we only have one. */
+
+ if (!dev->out_substream) {
+ /* Nobody is listening - throw it on the floor. */
+ return;
+ }
+ if (!test_bit(dev->out_substream->number, &dev->out_triggered)) {
+ return;
+ }
+ snd_rawmidi_receive(dev->out_substream, data, length);
+}
+
+static void gmidi_handle_out_data(struct usb_ep *ep, struct usb_request *req)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+
+ for (i = 0; i + 3 < req->actual; i += 4) {
+ if (buf[i] != 0) {
+ int cable = buf[i] >> 4;
+ int length = gmidi_cin_length[buf[i] & 0x0f];
+ gmidi_read_data(ep, cable, &buf[i + 1], length);
+ }
+ }
+}
+
+static void gmidi_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct gmidi_device *dev = ep->driver_data;
+ int status = req->status;
+
+ switch (status) {
+ case 0: /* normal completion */
+ if (ep == dev->out_ep) {
+ /* we received stuff.
+ req is queued again, below */
+ gmidi_handle_out_data(ep, req);
+ } else if (ep == dev->in_ep) {
+ /* our transmit completed.
+ see if there's more to go.
+ gmidi_transmit eats req, don't queue it again. */
+ gmidi_transmit(dev, req);
+ return;
+ }
+ break;
+
+ /* this endpoint is normally active while we're configured */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
+ req->actual, req->length);
+ if (ep == dev->out_ep) {
+ gmidi_handle_out_data(ep, req);
+ }
+ free_ep_req(ep, req);
+ return;
+
+ case -EOVERFLOW: /* buffer overrun on read means that
+ * we didn't provide a big enough
+ * buffer.
+ */
+ default:
+ DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+ break;
+ case -EREMOTEIO: /* short read */
+ break;
+ }
+
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (status) {
+ ERROR(dev, "kill %s: resubmit %d bytes --> %d\n",
+ ep->name, req->length, status);
+ usb_ep_set_halt(ep);
+ /* FIXME recover later ... somehow */
+ }
+}
+
+static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags)
+{
+ int err = 0;
+ struct usb_request *req;
+ struct usb_ep* ep;
+ unsigned i;
+
+ err = usb_ep_enable(dev->in_ep, &bulk_in_desc);
+ if (err) {
+ ERROR(dev, "can't start %s: %d\n", dev->in_ep->name, err);
+ goto fail;
+ }
+ dev->in_ep->driver_data = dev;
+
+ err = usb_ep_enable(dev->out_ep, &bulk_out_desc);
+ if (err) {
+ ERROR(dev, "can't start %s: %d\n", dev->out_ep->name, err);
+ goto fail;
+ }
+ dev->out_ep->driver_data = dev;
+
+ /* allocate a bunch of read buffers and queue them all at once. */
+ ep = dev->out_ep;
+ for (i = 0; i < qlen && err == 0; i++) {
+ req = alloc_ep_req(ep, buflen);
+ if (req) {
+ req->complete = gmidi_complete;
+ err = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (err) {
+ DBG(dev, "%s queue req: %d\n", ep->name, err);
+ }
+ } else {
+ err = -ENOMEM;
+ }
+ }
+fail:
+ /* caller is responsible for cleanup on error */
+ return err;
+}
+
+
+static void gmidi_reset_config(struct gmidi_device *dev)
+{
+ if (dev->config == 0) {
+ return;
+ }
+
+ DBG(dev, "reset config\n");
+
+ /* just disable endpoints, forcing completion of pending i/o.
+ * all our completion handlers free their requests in this case.
+ */
+ usb_ep_disable(dev->in_ep);
+ usb_ep_disable(dev->out_ep);
+ dev->config = 0;
+}
+
+/* change our operational config. this code must agree with the code
+ * that returns config descriptors, and altsetting code.
+ *
+ * it's also responsible for power management interactions. some
+ * configurations might not work with our current power sources.
+ *
+ * note that some device controller hardware will constrain what this
+ * code can do, perhaps by disallowing more than one configuration or
+ * by limiting configuration choices (like the pxa2xx).
+ */
+static int
+gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
+{
+ int result = 0;
+ struct usb_gadget *gadget = dev->gadget;
+
+#if 0
+ /* FIXME */
+ /* Hacking this bit out fixes a bug where on receipt of two
+ USB_REQ_SET_CONFIGURATION messages, we end up with no
+ buffered OUT requests waiting for data. This is clearly
+ hiding a bug elsewhere, because if the config didn't
+ change then we really shouldn't do anything. */
+ /* Having said that, when we do "change" from config 1
+ to config 1, we at least gmidi_reset_config() which
+ clears out any requests on endpoints, so it's not like
+ we leak or anything. */
+ if (number == dev->config) {
+ return 0;
+ }
+#endif
+
+ if (gadget_is_sa1100(gadget) && dev->config) {
+ /* tx fifo is full, but we can't clear it...*/
+ INFO(dev, "can't change configurations\n");
+ return -ESPIPE;
+ }
+ gmidi_reset_config(dev);
+
+ switch (number) {
+ case GMIDI_CONFIG:
+ result = set_gmidi_config(dev, gfp_flags);
+ break;
+ default:
+ result = -EINVAL;
+ /* FALL THROUGH */
+ case 0:
+ return result;
+ }
+
+ if (!result && (!dev->in_ep || !dev->out_ep)) {
+ result = -ENODEV;
+ }
+ if (result) {
+ gmidi_reset_config(dev);
+ } else {
+ char *speed;
+
+ switch (gadget->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ default: speed = "?"; break;
+ }
+
+ dev->config = number;
+ INFO(dev, "%s speed\n", speed);
+ }
+ return result;
+}
+
+
+static void gmidi_setup_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length) {
+ DBG((struct gmidi_device *) ep->driver_data,
+ "setup complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+ }
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's
+ * not handled lower down, in hardware or the hardware driver (like
+ * device and endpoint feature flags, and their status). It's all
+ * housekeeping for the gadget function we're implementing. Most of
+ * the work is in config-specific setup.
+ */
+static int gmidi_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct gmidi_device *dev = get_gadget_data(gadget);
+ struct usb_request *req = dev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* usually this stores reply data in the pre-allocated ep0 buffer,
+ * but config change events will reconfigure hardware.
+ */
+ req->zero = 0;
+ switch (ctrl->bRequest) {
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN) {
+ goto unknown;
+ }
+ switch (w_value >> 8) {
+
+ case USB_DT_DEVICE:
+ value = min(w_length, (u16) sizeof(device_desc));
+ memcpy(req->buf, &device_desc, value);
+ break;
+ case USB_DT_CONFIG:
+ value = config_buf(gadget, req->buf,
+ w_value >> 8,
+ w_value & 0xff);
+ if (value >= 0) {
+ value = min(w_length, (u16)value);
+ }
+ break;
+
+ case USB_DT_STRING:
+ /* wIndex == language code.
+ * this driver only handles one language, you can
+ * add string tables for other languages, using
+ * any UTF-8 characters
+ */
+ value = usb_gadget_get_string(&stringtab,
+ w_value & 0xff, req->buf);
+ if (value >= 0) {
+ value = min(w_length, (u16)value);
+ }
+ break;
+ }
+ break;
+
+ /* currently two configs, two speeds */
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0) {
+ goto unknown;
+ }
+ if (gadget->a_hnp_support) {
+ DBG(dev, "HNP available\n");
+ } else if (gadget->a_alt_hnp_support) {
+ DBG(dev, "HNP needs a different root port\n");
+ } else {
+ VDBG(dev, "HNP inactive\n");
+ }
+ spin_lock(&dev->lock);
+ value = gmidi_set_config(dev, w_value, GFP_ATOMIC);
+ spin_unlock(&dev->lock);
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != USB_DIR_IN) {
+ goto unknown;
+ }
+ *(u8 *)req->buf = dev->config;
+ value = min(w_length, (u16)1);
+ break;
+
+ /* until we add altsetting support, or other interfaces,
+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
+ * and already killed pending endpoint I/O.
+ */
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != USB_RECIP_INTERFACE) {
+ goto unknown;
+ }
+ spin_lock(&dev->lock);
+ if (dev->config && w_index < GMIDI_NUM_INTERFACES
+ && w_value == 0)
+ {
+ u8 config = dev->config;
+
+ /* resets interface configuration, forgets about
+ * previous transaction state (queued bufs, etc)
+ * and re-inits endpoint state (toggle etc)
+ * no response queued, just zero status == success.
+ * if we had more than one interface we couldn't
+ * use this "reset the config" shortcut.
+ */
+ gmidi_reset_config(dev);
+ gmidi_set_config(dev, config, GFP_ATOMIC);
+ value = 0;
+ }
+ spin_unlock(&dev->lock);
+ break;
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) {
+ goto unknown;
+ }
+ if (!dev->config) {
+ break;
+ }
+ if (w_index >= GMIDI_NUM_INTERFACES) {
+ value = -EDOM;
+ break;
+ }
+ *(u8 *)req->buf = 0;
+ value = min(w_length, (u16)1);
+ break;
+
+ default:
+unknown:
+ VDBG(dev, "unknown control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer before status phase? */
+ if (value >= 0) {
+ req->length = value;
+ req->zero = value < w_length;
+ value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0) {
+ DBG(dev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ gmidi_setup_complete(gadget->ep0, req);
+ }
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static void gmidi_disconnect(struct usb_gadget *gadget)
+{
+ struct gmidi_device *dev = get_gadget_data(gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ gmidi_reset_config(dev);
+
+ /* a more significant application might have some non-usb
+ * activities to quiesce here, saving resources like power
+ * or pushing the notification up a network stack.
+ */
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ /* next we may get setup() calls to enumerate new connections;
+ * or an unbind() during shutdown (including removing module).
+ */
+}
+
+static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget)
+{
+ struct gmidi_device *dev = get_gadget_data(gadget);
+ struct snd_card* card;
+
+ DBG(dev, "unbind\n");
+
+ card = dev->card;
+ dev->card = NULL;
+ if (card) {
+ snd_card_free(card);
+ }
+
+ /* we've already been disconnected ... no i/o is active */
+ if (dev->req) {
+ dev->req->length = USB_BUFSIZ;
+ free_ep_req(gadget->ep0, dev->req);
+ }
+ kfree(dev);
+ set_gadget_data(gadget, NULL);
+}
+
+static int gmidi_snd_free(struct snd_device *device)
+{
+ return 0;
+}
+
+static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0,
+ uint8_t p1, uint8_t p2, uint8_t p3)
+{
+ unsigned length = req->length;
+
+ uint8_t* buf = (uint8_t*)req->buf + length;
+ buf[0] = p0;
+ buf[1] = p1;
+ buf[2] = p2;
+ buf[3] = p3;
+ req->length = length + 4;
+}
+
+/*
+ * Converts MIDI commands to USB MIDI packets.
+ */
+static void gmidi_transmit_byte(struct usb_request* req,
+ struct gmidi_in_port* port, uint8_t b)
+{
+ uint8_t p0 = port->cable;
+
+ if (b >= 0xf8) {
+ gmidi_transmit_packet(req, p0 | 0x0f, b, 0, 0);
+ } else if (b >= 0xf0) {
+ switch (b) {
+ case 0xf0:
+ port->data[0] = b;
+ port->state = STATE_SYSEX_1;
+ break;
+ case 0xf1:
+ case 0xf3:
+ port->data[0] = b;
+ port->state = STATE_1PARAM;
+ break;
+ case 0xf2:
+ port->data[0] = b;
+ port->state = STATE_2PARAM_1;
+ break;
+ case 0xf4:
+ case 0xf5:
+ port->state = STATE_UNKNOWN;
+ break;
+ case 0xf6:
+ gmidi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0);
+ port->state = STATE_UNKNOWN;
+ break;
+ case 0xf7:
+ switch (port->state) {
+ case STATE_SYSEX_0:
+ gmidi_transmit_packet(req,
+ p0 | 0x05, 0xf7, 0, 0);
+ break;
+ case STATE_SYSEX_1:
+ gmidi_transmit_packet(req,
+ p0 | 0x06, port->data[0], 0xf7, 0);
+ break;
+ case STATE_SYSEX_2:
+ gmidi_transmit_packet(req,
+ p0 | 0x07, port->data[0],
+ port->data[1], 0xf7);
+ break;
+ }
+ port->state = STATE_UNKNOWN;
+ break;
+ }
+ } else if (b >= 0x80) {
+ port->data[0] = b;
+ if (b >= 0xc0 && b <= 0xdf)
+ port->state = STATE_1PARAM;
+ else
+ port->state = STATE_2PARAM_1;
+ } else { /* b < 0x80 */
+ switch (port->state) {
+ case STATE_1PARAM:
+ if (port->data[0] < 0xf0) {
+ p0 |= port->data[0] >> 4;
+ } else {
+ p0 |= 0x02;
+ port->state = STATE_UNKNOWN;
+ }
+ gmidi_transmit_packet(req, p0, port->data[0], b, 0);
+ break;
+ case STATE_2PARAM_1:
+ port->data[1] = b;
+ port->state = STATE_2PARAM_2;
+ break;
+ case STATE_2PARAM_2:
+ if (port->data[0] < 0xf0) {
+ p0 |= port->data[0] >> 4;
+ port->state = STATE_2PARAM_1;
+ } else {
+ p0 |= 0x03;
+ port->state = STATE_UNKNOWN;
+ }
+ gmidi_transmit_packet(req,
+ p0, port->data[0], port->data[1], b);
+ break;
+ case STATE_SYSEX_0:
+ port->data[0] = b;
+ port->state = STATE_SYSEX_1;
+ break;
+ case STATE_SYSEX_1:
+ port->data[1] = b;
+ port->state = STATE_SYSEX_2;
+ break;
+ case STATE_SYSEX_2:
+ gmidi_transmit_packet(req,
+ p0 | 0x04, port->data[0], port->data[1], b);
+ port->state = STATE_SYSEX_0;
+ break;
+ }
+ }
+}
+
+static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req)
+{
+ struct usb_ep* ep = dev->in_ep;
+ struct gmidi_in_port* port = &dev->in_port;
+
+ if (!ep) {
+ return;
+ }
+ if (!req) {
+ req = alloc_ep_req(ep, buflen);
+ }
+ if (!req) {
+ ERROR(dev, "gmidi_transmit: alloc_ep_request failed\n");
+ return;
+ }
+ req->length = 0;
+ req->complete = gmidi_complete;
+
+ if (port->active) {
+ while (req->length + 3 < buflen) {
+ uint8_t b;
+ if (snd_rawmidi_transmit(dev->in_substream, &b, 1)
+ != 1)
+ {
+ port->active = 0;
+ break;
+ }
+ gmidi_transmit_byte(req, port, b);
+ }
+ }
+ if (req->length > 0) {
+ usb_ep_queue(ep, req, GFP_ATOMIC);
+ } else {
+ free_ep_req(ep, req);
+ }
+}
+
+static void gmidi_in_tasklet(unsigned long data)
+{
+ struct gmidi_device* dev = (struct gmidi_device*)data;
+
+ gmidi_transmit(dev, NULL);
+}
+
+static int gmidi_in_open(struct snd_rawmidi_substream *substream)
+{
+ struct gmidi_device* dev = substream->rmidi->private_data;
+
+ VDBG(dev, "gmidi_in_open\n");
+ dev->in_substream = substream;
+ dev->in_port.state = STATE_UNKNOWN;
+ return 0;
+}
+
+static int gmidi_in_close(struct snd_rawmidi_substream *substream)
+{
+ VDBG(dev, "gmidi_in_close\n");
+ return 0;
+}
+
+static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+ struct gmidi_device* dev = substream->rmidi->private_data;
+
+ VDBG(dev, "gmidi_in_trigger %d\n", up);
+ dev->in_port.active = up;
+ if (up) {
+ tasklet_hi_schedule(&dev->tasklet);
+ }
+}
+
+static int gmidi_out_open(struct snd_rawmidi_substream *substream)
+{
+ struct gmidi_device* dev = substream->rmidi->private_data;
+
+ VDBG(dev, "gmidi_out_open\n");
+ dev->out_substream = substream;
+ return 0;
+}
+
+static int gmidi_out_close(struct snd_rawmidi_substream *substream)
+{
+ VDBG(dev, "gmidi_out_close\n");
+ return 0;
+}
+
+static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+ struct gmidi_device* dev = substream->rmidi->private_data;
+
+ VDBG(dev, "gmidi_out_trigger %d\n", up);
+ if (up) {
+ set_bit(substream->number, &dev->out_triggered);
+ } else {
+ clear_bit(substream->number, &dev->out_triggered);
+ }
+}
+
+static struct snd_rawmidi_ops gmidi_in_ops = {
+ .open = gmidi_in_open,
+ .close = gmidi_in_close,
+ .trigger = gmidi_in_trigger,
+};
+
+static struct snd_rawmidi_ops gmidi_out_ops = {
+ .open = gmidi_out_open,
+ .close = gmidi_out_close,
+ .trigger = gmidi_out_trigger
+};
+
+/* register as a sound "card" */
+static int gmidi_register_card(struct gmidi_device *dev)
+{
+ struct snd_card *card;
+ struct snd_rawmidi *rmidi;
+ int err;
+ int out_ports = 1;
+ int in_ports = 1;
+ static struct snd_device_ops ops = {
+ .dev_free = gmidi_snd_free,
+ };
+
+ card = snd_card_new(index, id, THIS_MODULE, 0);
+ if (!card) {
+ ERROR(dev, "snd_card_new failed\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+ dev->card = card;
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, dev, &ops);
+ if (err < 0) {
+ ERROR(dev, "snd_device_new failed: error %d\n", err);
+ goto fail;
+ }
+
+ strcpy(card->driver, longname);
+ strcpy(card->longname, longname);
+ strcpy(card->shortname, shortname);
+
+ /* Set up rawmidi */
+ dev->in_port.dev = dev;
+ dev->in_port.active = 0;
+ snd_component_add(card, "MIDI");
+ err = snd_rawmidi_new(card, "USB MIDI Gadget", 0,
+ out_ports, in_ports, &rmidi);
+ if (err < 0) {
+ ERROR(dev, "snd_rawmidi_new failed: error %d\n", err);
+ goto fail;
+ }
+ dev->rmidi = rmidi;
+ strcpy(rmidi->name, card->shortname);
+ rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
+ SNDRV_RAWMIDI_INFO_INPUT |
+ SNDRV_RAWMIDI_INFO_DUPLEX;
+ rmidi->private_data = dev;
+
+ /* Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT.
+ It's an upside-down world being a gadget. */
+ snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops);
+ snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops);
+
+ snd_card_set_dev(card, &dev->gadget->dev);
+
+ /* register it - we're ready to go */
+ err = snd_card_register(card);
+ if (err < 0) {
+ ERROR(dev, "snd_card_register failed\n");
+ goto fail;
+ }
+
+ VDBG(dev, "gmidi_register_card finished ok\n");
+ return 0;
+
+fail:
+ if (dev->card) {
+ snd_card_free(dev->card);
+ dev->card = NULL;
+ }
+ return err;
+}
+
+/*
+ * Creates an output endpoint, and initializes output ports.
+ */
+static int __devinit gmidi_bind(struct usb_gadget *gadget)
+{
+ struct gmidi_device *dev;
+ struct usb_ep *in_ep, *out_ep;
+ int gcnum, err = 0;
+
+ /* support optional vendor/distro customization */
+ if (idVendor) {
+ if (!idProduct) {
+ printk(KERN_ERR "idVendor needs idProduct!\n");
+ return -ENODEV;
+ }
+ device_desc.idVendor = cpu_to_le16(idVendor);
+ device_desc.idProduct = cpu_to_le16(idProduct);
+ if (bcdDevice) {
+ device_desc.bcdDevice = cpu_to_le16(bcdDevice);
+ }
+ }
+ if (iManufacturer) {
+ strlcpy(manufacturer, iManufacturer, sizeof(manufacturer));
+ } else {
+ snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
+ system_utsname.sysname, system_utsname.release,
+ gadget->name);
+ }
+ if (iProduct) {
+ strlcpy(product_desc, iProduct, sizeof(product_desc));
+ }
+ if (iSerialNumber) {
+ device_desc.iSerialNumber = STRING_SERIAL,
+ strlcpy(serial_number, iSerialNumber, sizeof(serial_number));
+ }
+
+ /* Bulk-only drivers like this one SHOULD be able to
+ * autoconfigure on any sane usb controller driver,
+ * but there may also be important quirks to address.
+ */
+ usb_ep_autoconfig_reset(gadget);
+ in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc);
+ if (!in_ep) {
+autoconf_fail:
+ printk(KERN_ERR "%s: can't autoconfigure on %s\n",
+ shortname, gadget->name);
+ return -ENODEV;
+ }
+ EP_IN_NAME = in_ep->name;
+ in_ep->driver_data = in_ep; /* claim */
+
+ out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc);
+ if (!out_ep) {
+ goto autoconf_fail;
+ }
+ EP_OUT_NAME = out_ep->name;
+ out_ep->driver_data = out_ep; /* claim */
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum >= 0) {
+ device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+ } else {
+ /* gmidi is so simple (no altsettings) that
+ * it SHOULD NOT have problems with bulk-capable hardware.
+ * so warn about unrecognized controllers, don't panic.
+ */
+ printk(KERN_WARNING "%s: controller '%s' not recognized\n",
+ shortname, gadget->name);
+ device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
+ }
+
+
+ /* ok, we made sense of the hardware ... */
+ dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
+ if (!dev) {
+ return -ENOMEM;
+ }
+ spin_lock_init(&dev->lock);
+ dev->gadget = gadget;
+ dev->in_ep = in_ep;
+ dev->out_ep = out_ep;
+ set_gadget_data(gadget, dev);
+ tasklet_init(&dev->tasklet, gmidi_in_tasklet, (unsigned long)dev);
+
+ /* preallocate control response and buffer */
+ dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+ if (!dev->req) {
+ err = -ENOMEM;
+ goto fail;
+ }
+ dev->req->buf = usb_ep_alloc_buffer(gadget->ep0, USB_BUFSIZ,
+ &dev->req->dma, GFP_KERNEL);
+ if (!dev->req->buf) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ dev->req->complete = gmidi_setup_complete;
+
+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+ gadget->ep0->driver_data = dev;
+
+ INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
+ INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
+ EP_OUT_NAME, EP_IN_NAME);
+
+ /* register as an ALSA sound card */
+ err = gmidi_register_card(dev);
+ if (err < 0) {
+ goto fail;
+ }
+
+ VDBG(dev, "gmidi_bind finished ok\n");
+ return 0;
+
+fail:
+ gmidi_unbind(gadget);
+ return err;
+}
+
+
+static void gmidi_suspend(struct usb_gadget *gadget)
+{
+ struct gmidi_device *dev = get_gadget_data(gadget);
+
+ if (gadget->speed == USB_SPEED_UNKNOWN) {
+ return;
+ }
+
+ DBG(dev, "suspend\n");
+}
+
+static void gmidi_resume(struct usb_gadget *gadget)
+{
+ struct gmidi_device *dev = get_gadget_data(gadget);
+
+ DBG(dev, "resume\n");
+}
+
+
+static struct usb_gadget_driver gmidi_driver = {
+ .speed = USB_SPEED_FULL,
+ .function = (char *)longname,
+ .bind = gmidi_bind,
+ .unbind = __exit_p(gmidi_unbind),
+
+ .setup = gmidi_setup,
+ .disconnect = gmidi_disconnect,
+
+ .suspend = gmidi_suspend,
+ .resume = gmidi_resume,
+
+ .driver = {
+ .name = (char *)shortname,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gmidi_init(void)
+{
+ return usb_gadget_register_driver(&gmidi_driver);
+}
+module_init(gmidi_init);
+
+static void __exit gmidi_cleanup(void)
+{
+ usb_gadget_unregister_driver(&gmidi_driver);
+}
+module_exit(gmidi_cleanup);
+
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 3bdc5e3..4655522 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -32,6 +32,7 @@
#include <linux/compiler.h>
#include <asm/uaccess.h>
#include <linux/slab.h>
+#include <linux/poll.h>
#include <linux/device.h>
#include <linux/moduleparam.h>
@@ -222,7 +223,6 @@
/* needs no more cleanup */
BUG_ON (!list_empty (&data->epfiles));
BUG_ON (waitqueue_active (&data->wait));
- BUG_ON (down_trylock (&data->lock) != 0);
kfree (data);
}
@@ -477,6 +477,10 @@
ep_release (struct inode *inode, struct file *fd)
{
struct ep_data *data = fd->private_data;
+ int value;
+
+ if ((value = down_interruptible(&data->lock)) < 0)
+ return value;
/* clean up if this can be reopened */
if (data->state != STATE_EP_UNBOUND) {
@@ -485,6 +489,7 @@
data->hs_desc.bDescriptorType = 0;
usb_ep_disable(data->ep);
}
+ up (&data->lock);
put_ep (data);
return 0;
}
@@ -709,7 +714,7 @@
/*----------------------------------------------------------------------*/
/* used after endpoint configuration */
-static struct file_operations ep_io_operations = {
+static const struct file_operations ep_io_operations = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -741,7 +746,7 @@
struct ep_data *data = fd->private_data;
struct usb_ep *ep;
u32 tag;
- int value;
+ int value, length = len;
if ((value = down_interruptible (&data->lock)) < 0)
return value;
@@ -792,7 +797,6 @@
goto fail0;
}
}
- value = len;
spin_lock_irq (&data->dev->lock);
if (data->dev->state == STATE_DEV_UNBOUND) {
@@ -822,8 +826,10 @@
data->name);
data->state = STATE_EP_DEFER_ENABLE;
}
- if (value == 0)
+ if (value == 0) {
fd->f_op = &ep_io_operations;
+ value = length;
+ }
gone:
spin_unlock_irq (&data->dev->lock);
if (value < 0) {
@@ -844,7 +850,7 @@
static int
ep_open (struct inode *inode, struct file *fd)
{
- struct ep_data *data = inode->u.generic_ip;
+ struct ep_data *data = inode->i_private;
int value = -EBUSY;
if (down_interruptible (&data->lock) != 0)
@@ -867,7 +873,7 @@
}
/* used before endpoint configuration */
-static struct file_operations ep_config_operations = {
+static const struct file_operations ep_config_operations = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -1009,7 +1015,7 @@
else {
len = min (len, (size_t)dev->req->actual);
// FIXME don't call this with the spinlock held ...
- if (copy_to_user (buf, &dev->req->buf, len))
+ if (copy_to_user (buf, dev->req->buf, len))
retval = -EFAULT;
clean_req (dev->gadget->ep0, dev->req);
/* NOTE userspace can't yet choose to stall */
@@ -1229,6 +1235,35 @@
return 0;
}
+static unsigned int
+ep0_poll (struct file *fd, poll_table *wait)
+{
+ struct dev_data *dev = fd->private_data;
+ int mask = 0;
+
+ poll_wait(fd, &dev->wait, wait);
+
+ spin_lock_irq (&dev->lock);
+
+ /* report fd mode change before acting on it */
+ if (dev->setup_abort) {
+ dev->setup_abort = 0;
+ mask = POLLHUP;
+ goto out;
+ }
+
+ if (dev->state == STATE_SETUP) {
+ if (dev->setup_in || dev->setup_can_stall)
+ mask = POLLOUT;
+ } else {
+ if (dev->ev_next != 0)
+ mask = POLLIN;
+ }
+out:
+ spin_unlock_irq(&dev->lock);
+ return mask;
+}
+
static int dev_ioctl (struct inode *inode, struct file *fd,
unsigned code, unsigned long value)
{
@@ -1241,14 +1276,14 @@
}
/* used after device configuration */
-static struct file_operations ep0_io_operations = {
+static const struct file_operations ep0_io_operations = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = ep0_read,
.write = ep0_write,
.fasync = ep0_fasync,
- // .poll = ep0_poll,
+ .poll = ep0_poll,
.ioctl = dev_ioctl,
.release = dev_release,
};
@@ -1696,16 +1731,17 @@
{
struct dev_data *dev = get_gadget_data (gadget);
+ spin_lock (&dev->lock);
if (dev->state == STATE_UNCONNECTED) {
DBG (dev, "already unconnected\n");
- return;
+ goto exit;
}
dev->state = STATE_UNCONNECTED;
INFO (dev, "disconnected\n");
- spin_lock (&dev->lock);
next_event (dev, GADGETFS_DISCONNECT);
ep0_readable (dev);
+exit:
spin_unlock (&dev->lock);
}
@@ -1909,7 +1945,7 @@
static int
dev_open (struct inode *inode, struct file *fd)
{
- struct dev_data *dev = inode->u.generic_ip;
+ struct dev_data *dev = inode->i_private;
int value = -EBUSY;
if (dev->state == STATE_DEV_DISABLED) {
@@ -1922,7 +1958,7 @@
return value;
}
-static struct file_operations dev_init_operations = {
+static const struct file_operations dev_init_operations = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -1966,11 +2002,10 @@
inode->i_mode = mode;
inode->i_uid = default_uid;
inode->i_gid = default_gid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime
= CURRENT_TIME;
- inode->u.generic_ip = data;
+ inode->i_private = data;
inode->i_fop = fops;
}
return inode;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 0924323..3bda37f 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2,7 +2,7 @@
* Driver for the PLX NET2280 USB device controller.
* Specs and errata are available from <http://www.plxtech.com>.
*
- * PLX Technology Inc. (formerly NetChip Technology) supported the
+ * PLX Technology Inc. (formerly NetChip Technology) supported the
* development of this driver.
*
*
@@ -26,7 +26,8 @@
* Copyright (C) 2003 David Brownell
* Copyright (C) 2003-2005 PLX Technology, Inc.
*
- * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility
+ * with 2282 chip
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -85,7 +86,7 @@
static const char driver_desc [] = DRIVER_DESC;
static const char ep0name [] = "ep0";
-static const char *ep_name [] = {
+static const char *const ep_name [] = {
ep0name,
"ep-a", "ep-b", "ep-c", "ep-d",
"ep-e", "ep-f",
@@ -225,7 +226,9 @@
if (!ep->is_in)
writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
else if (dev->pdev->device != 0x2280) {
- /* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */
+ /* Added for 2282, Don't use nak packets on an in endpoint,
+ * this was ignored on 2280
+ */
writel ((1 << CLEAR_NAK_OUT_PACKETS)
| (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
}
@@ -288,7 +291,7 @@
return -ETIMEDOUT;
}
-static struct usb_ep_ops net2280_ep_ops;
+static const struct usb_ep_ops net2280_ep_ops;
static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
{
@@ -449,34 +452,15 @@
/*-------------------------------------------------------------------------*/
-#undef USE_KMALLOC
-
-/* many common platforms have dma-coherent caches, which means that it's
- * safe to use kmalloc() memory for all i/o buffers without using any
- * cache flushing calls. (unless you're trying to share cache lines
- * between dma and non-dma activities, which is a slow idea in any case.)
+/*
+ * dma-coherent memory allocation (for dma-capable endpoints)
*
- * other platforms need more care, with 2.5 having a moderately general
- * solution (which falls down for allocations smaller than one page)
- * that improves significantly on the 2.4 PCI allocators by removing
- * the restriction that memory never be freed in_interrupt().
+ * NOTE: the dma_*_coherent() API calls suck. Most implementations are
+ * (a) page-oriented, so small buffers lose big; and (b) asymmetric with
+ * respect to calls with irqs disabled: alloc is safe, free is not.
+ * We currently work around (b), but not (a).
*/
-#if defined(CONFIG_X86)
-#define USE_KMALLOC
-#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
-#define USE_KMALLOC
-
-#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT)
-#define USE_KMALLOC
-
-/* FIXME there are other cases, including an x86-64 one ... */
-#endif
-
-/* allocating buffers this way eliminates dma mapping overhead, which
- * on some platforms will mean eliminating a per-io buffer copy. with
- * some kinds of system caches, further tweaks may still be needed.
- */
static void *
net2280_alloc_buffer (
struct usb_ep *_ep,
@@ -493,43 +477,71 @@
return NULL;
*dma = DMA_ADDR_INVALID;
-#if defined(USE_KMALLOC)
- retval = kmalloc(bytes, gfp_flags);
- if (retval)
- *dma = virt_to_phys(retval);
-#else
- if (ep->dma) {
- /* the main problem with this call is that it wastes memory
- * on typical 1/N page allocations: it allocates 1-N pages.
- */
-#warning Using dma_alloc_coherent even with buffers smaller than a page.
+ if (ep->dma)
retval = dma_alloc_coherent(&ep->dev->pdev->dev,
bytes, dma, gfp_flags);
- } else
+ else
retval = kmalloc(bytes, gfp_flags);
-#endif
return retval;
}
+static DEFINE_SPINLOCK(buflock);
+static LIST_HEAD(buffers);
+
+struct free_record {
+ struct list_head list;
+ struct device *dev;
+ unsigned bytes;
+ dma_addr_t dma;
+};
+
+static void do_free(unsigned long ignored)
+{
+ spin_lock_irq(&buflock);
+ while (!list_empty(&buffers)) {
+ struct free_record *buf;
+
+ buf = list_entry(buffers.next, struct free_record, list);
+ list_del(&buf->list);
+ spin_unlock_irq(&buflock);
+
+ dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma);
+
+ spin_lock_irq(&buflock);
+ }
+ spin_unlock_irq(&buflock);
+}
+
+static DECLARE_TASKLET(deferred_free, do_free, 0);
+
static void
net2280_free_buffer (
struct usb_ep *_ep,
- void *buf,
+ void *address,
dma_addr_t dma,
unsigned bytes
) {
/* free memory into the right allocator */
-#ifndef USE_KMALLOC
if (dma != DMA_ADDR_INVALID) {
struct net2280_ep *ep;
+ struct free_record *buf = address;
+ unsigned long flags;
ep = container_of(_ep, struct net2280_ep, ep);
if (!_ep)
return;
- dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ buf->dev = &ep->dev->pdev->dev;
+ buf->bytes = bytes;
+ buf->dma = dma;
+
+ spin_lock_irqsave(&buflock, flags);
+ list_add_tail(&buf->list, &buffers);
+ tasklet_schedule(&deferred_free);
+ spin_unlock_irqrestore(&buflock, flags);
} else
-#endif
- kfree (buf);
+ kfree (address);
}
/*-------------------------------------------------------------------------*/
@@ -737,7 +749,8 @@
*/
if (ep->is_in)
dmacount |= (1 << DMA_DIRECTION);
- if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)
+ if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0)
+ || ep->dev->pdev->device != 0x2280)
dmacount |= (1 << END_OF_CHAIN);
req->valid = valid;
@@ -812,7 +825,7 @@
/* previous OUT packet might have been short */
if (!ep->is_in && ((tmp = readl (&ep->regs->ep_stat))
- & (1 << NAK_OUT_PACKETS)) != 0) {
+ & (1 << NAK_OUT_PACKETS)) != 0) {
writel ((1 << SHORT_PACKET_TRANSFERRED_INTERRUPT),
&ep->regs->ep_stat);
@@ -1373,7 +1386,7 @@
(void) readl (&ep->regs->ep_rsp);
}
-static struct usb_ep_ops net2280_ep_ops = {
+static const struct usb_ep_ops net2280_ep_ops = {
.enable = net2280_enable,
.disable = net2280_disable,
@@ -1631,7 +1644,7 @@
}
/* Indexed Registers */
- // none yet
+ // none yet
/* Statistics */
t = scnprintf (next, size, "\nirqs: ");
@@ -1691,11 +1704,11 @@
({ char *val;
switch (d->bmAttributes & 0x03) {
case USB_ENDPOINT_XFER_BULK:
- val = "bulk"; break;
+ val = "bulk"; break;
case USB_ENDPOINT_XFER_INT:
- val = "intr"; break;
+ val = "intr"; break;
default:
- val = "iso"; break;
+ val = "iso"; break;
}; val; }),
le16_to_cpu (d->wMaxPacketSize) & 0x1fff,
ep->dma ? "dma" : "pio", ep->fifo_size
@@ -1808,8 +1821,8 @@
* net2280_set_fifo_mode - change allocation of fifo buffers
* @gadget: access to the net2280 device that will be updated
* @mode: 0 for default, four 1kB buffers (ep-a through ep-d);
- * 1 for two 2kB buffers (ep-a and ep-b only);
- * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c).
+ * 1 for two 2kB buffers (ep-a and ep-b only);
+ * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c).
*
* returns zero on success, else negative errno. when this succeeds,
* the contents of gadget->ep_list may have changed.
@@ -2241,7 +2254,8 @@
req->td->dmacount = 0;
t = readl (&ep->regs->ep_avail);
dma_done (ep, req, count,
- (ep->out_overflow || t) ? -EOVERFLOW : 0);
+ (ep->out_overflow || t)
+ ? -EOVERFLOW : 0);
}
/* also flush to prevent erratum 0106 trouble */
@@ -2411,7 +2425,7 @@
, &ep->regs->ep_stat);
u.raw [0] = readl (&dev->usb->setup0123);
u.raw [1] = readl (&dev->usb->setup4567);
-
+
cpu_to_le32s (&u.raw [0]);
cpu_to_le32s (&u.raw [1]);
@@ -2578,14 +2592,16 @@
/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
* Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
- * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
+ * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
* only indicates a change in the reset state).
*/
if (stat & tmp) {
writel (tmp, &dev->regs->irqstat1);
- if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) &&
- ((readl (&dev->usb->usbstat) & mask) == 0))
- || ((readl (&dev->usb->usbctl) & (1 << VBUS_PIN)) == 0)
+ if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT))
+ && ((readl (&dev->usb->usbstat) & mask)
+ == 0))
+ || ((readl (&dev->usb->usbctl)
+ & (1 << VBUS_PIN)) == 0)
) && ( dev->gadget.speed != USB_SPEED_UNKNOWN)) {
DEBUG (dev, "disconnect %s\n",
dev->driver->driver.name);
@@ -2852,7 +2868,7 @@
/* now all the pci goodies ... */
if (pci_enable_device (pdev) < 0) {
- retval = -ENODEV;
+ retval = -ENODEV;
goto done;
}
dev->enabled = 1;
@@ -2870,6 +2886,10 @@
}
dev->region = 1;
+ /* FIXME provide firmware download interface to put
+ * 8051 code into the chip, e.g. to turn on PCI PM.
+ */
+
base = ioremap_nocache (resource, len);
if (base == NULL) {
DEBUG (dev, "can't map memory\n");
@@ -2984,16 +3004,16 @@
/*-------------------------------------------------------------------------*/
-static struct pci_device_id pci_ids [] = { {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
+static const struct pci_device_id pci_ids [] = { {
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
.vendor = 0x17cc,
.device = 0x2280,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
}, {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
.vendor = 0x17cc,
.device = 0x2282,
.subvendor = PCI_ANY_ID,
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 2de9748..0a64504 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -40,7 +40,7 @@
#include <linux/platform_device.h>
#include <linux/usb_ch9.h>
#include <linux/usb_gadget.h>
-#include <linux/usb_otg.h>
+#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <asm/byteorder.h>
@@ -2437,7 +2437,7 @@
return single_open(file, proc_udc_show, NULL);
}
-static struct file_operations proc_ops = {
+static const struct file_operations proc_ops = {
.open = proc_udc_open,
.read = seq_read,
.llseek = seq_lseek,
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index fff027d..f1adcf8 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -150,6 +150,39 @@
static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
static void nuke (struct pxa2xx_ep *, int status);
+/* one GPIO should be used to detect VBUS from the host */
+static int is_vbus_present(void)
+{
+ struct pxa2xx_udc_mach_info *mach = the_controller->mach;
+
+ if (mach->gpio_vbus)
+ return pxa_gpio_get(mach->gpio_vbus);
+ if (mach->udc_is_connected)
+ return mach->udc_is_connected();
+ return 1;
+}
+
+/* one GPIO should control a D+ pullup, so host sees this device (or not) */
+static void pullup_off(void)
+{
+ struct pxa2xx_udc_mach_info *mach = the_controller->mach;
+
+ if (mach->gpio_pullup)
+ pxa_gpio_set(mach->gpio_pullup, 0);
+ else if (mach->udc_command)
+ mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+static void pullup_on(void)
+{
+ struct pxa2xx_udc_mach_info *mach = the_controller->mach;
+
+ if (mach->gpio_pullup)
+ pxa_gpio_set(mach->gpio_pullup, 1);
+ else if (mach->udc_command)
+ mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
static void pio_irq_enable(int bEndpointAddress)
{
bEndpointAddress &= 0xf;
@@ -1721,6 +1754,16 @@
#endif
+static irqreturn_t
+udc_vbus_irq(int irq, void *_dev, struct pt_regs *r)
+{
+ struct pxa2xx_udc *dev = _dev;
+ int vbus = pxa_gpio_get(dev->mach->gpio_vbus);
+
+ pxa2xx_udc_vbus_session(&dev->gadget, vbus);
+ return IRQ_HANDLED;
+}
+
/*-------------------------------------------------------------------------*/
@@ -2438,7 +2481,7 @@
static int __init pxa2xx_udc_probe(struct platform_device *pdev)
{
struct pxa2xx_udc *dev = &memory;
- int retval, out_dma = 1;
+ int retval, out_dma = 1, vbus_irq;
u32 chiprev;
/* insist on Intel/ARM/XScale */
@@ -2502,6 +2545,16 @@
/* other non-static parts of init */
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
+ if (dev->mach->gpio_vbus) {
+ vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR);
+ pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR)
+ | GPIO_IN);
+ set_irq_type(vbus_irq, IRQT_BOTHEDGE);
+ } else
+ vbus_irq = 0;
+ if (dev->mach->gpio_pullup)
+ pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR)
+ | GPIO_OUT | GPIO_DFLT_LOW);
init_timer(&dev->timer);
dev->timer.function = udc_watchdog;
@@ -2557,8 +2610,19 @@
HEX_DISPLAY(dev->stats.irqs);
LUB_DISC_BLNK_LED &= 0xff;
#endif
- }
+ } else
#endif
+ if (vbus_irq) {
+ retval = request_irq(vbus_irq, udc_vbus_irq,
+ SA_INTERRUPT | SA_SAMPLE_RANDOM,
+ driver_name, dev);
+ if (retval != 0) {
+ printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+ driver_name, vbus_irq, retval);
+ free_irq(IRQ_USB, dev);
+ return -EBUSY;
+ }
+ }
create_proc_files();
return 0;
@@ -2587,6 +2651,8 @@
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
+ if (dev->mach->gpio_vbus)
+ free_irq(IRQ_GPIO(dev->mach->gpio_vbus), dev);
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
return 0;
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index 19a883f..8e598c8 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -177,27 +177,19 @@
static struct pxa2xx_udc *the_controller;
-/* one GPIO should be used to detect VBUS from the host */
-static inline int is_vbus_present(void)
+static inline int pxa_gpio_get(unsigned gpio)
{
- if (!the_controller->mach->udc_is_connected)
- return 1;
- return the_controller->mach->udc_is_connected();
+ return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
}
-/* one GPIO should control a D+ pullup, so host sees this device (or not) */
-static inline void pullup_off(void)
+static inline void pxa_gpio_set(unsigned gpio, int is_on)
{
- if (!the_controller->mach->udc_command)
- return;
- the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
-}
+ int mask = GPIO_bit(gpio);
-static inline void pullup_on(void)
-{
- if (!the_controller->mach->udc_command)
- return;
- the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+ if (is_on)
+ GPSR(gpio) = mask;
+ else
+ GPCR(gpio) = mask;
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index e762aa1..b893e31 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1120,12 +1120,15 @@
gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
list_del(&req_entry->re_entry);
req->length = len;
+ spin_unlock_irqrestore(&dev->dev_lock, flags);
if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
printk(KERN_ERR
"gs_send: cannot queue read request, ret=%d\n",
ret);
+ spin_lock_irqsave(&dev->dev_lock, flags);
break;
}
+ spin_lock_irqsave(&dev->dev_lock, flags);
} else {
break;
}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b93d71d..cf10cbc 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -83,6 +83,7 @@
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+ select I2C if ARCH_PNX4008
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
@@ -141,6 +142,34 @@
To compile this driver as a module, choose M here: the
module will be called uhci-hcd.
+config USB_U132_HCD
+ tristate "Elan U132 Adapter Host Controller"
+ depends on USB && USB_FTDI_ELAN
+ default M
+ help
+ The U132 adapter is a USB to CardBus adapter specifically designed
+ for PC cards that contain an OHCI host controller. Typical PC cards
+ are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
+ adapter will *NOT* work with PC cards that do not contain an OHCI
+ controller.
+
+ For those PC cards that contain multiple OHCI controllers only ther
+ first one is used.
+
+ The driver consists of two modules, the "ftdi-elan" module is a
+ USB client driver that interfaces to the FTDI chip within ELAN's
+ USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
+ controller driver that talks to the OHCI controller within the
+ CardBus cards that are inserted in the U132 adapter.
+
+ This driver has been tested with a CardBus OHCI USB adapter, and
+ worked with a USB PEN Drive inserted into the first USB port of
+ the PCCARD. A rather pointless thing to do, but useful for testing.
+
+ It is safe to say M here.
+
+ See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
+
config USB_SL811_HCD
tristate "SL811HS HCD support"
depends on USB
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e3020f4b..a2e58c8 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -14,4 +14,5 @@
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
+obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 26ed757..5d1b12a 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -200,6 +200,7 @@
.reset = ehci_init,
.start = ehci_run,
.stop = ehci_stop,
+ .shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -268,6 +269,7 @@
static struct platform_driver ehci_hcd_au1xxx_driver = {
.probe = ehci_hcd_au1xxx_drv_probe,
.remove = ehci_hcd_au1xxx_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ehci_hcd_au1xxx_drv_suspend, */
/*.resume = ehci_hcd_au1xxx_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 65ac9fe..23b95b2 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2001-2002 by David Brownell
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -65,7 +65,7 @@
for (i = 0; i < HCS_N_PORTS (params); i++) {
// FIXME MIPS won't readb() ...
byte = readb (&ehci->caps->portroute[(i>>1)]);
- sprintf(tmp, "%d ",
+ sprintf(tmp, "%d ",
((i & 0x1) ? ((byte)&0xf) : ((byte>>4)&0xf)));
strcat(buf, tmp);
}
@@ -141,12 +141,12 @@
}
static void __attribute__((__unused__))
-dbg_itd (const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd)
+dbg_itd (const char *label, struct ehci_hcd *ehci, struct ehci_itd *itd)
{
ehci_dbg (ehci, "%s [%d] itd %p, next %08x, urb %p\n",
label, itd->frame, itd, le32_to_cpu(itd->hw_next), itd->urb);
ehci_dbg (ehci,
- " trans: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+ " trans: %08x %08x %08x %08x %08x %08x %08x %08x\n",
le32_to_cpu(itd->hw_transaction[0]),
le32_to_cpu(itd->hw_transaction[1]),
le32_to_cpu(itd->hw_transaction[2]),
@@ -156,7 +156,7 @@
le32_to_cpu(itd->hw_transaction[6]),
le32_to_cpu(itd->hw_transaction[7]));
ehci_dbg (ehci,
- " buf: %08x %08x %08x %08x %08x %08x %08x\n",
+ " buf: %08x %08x %08x %08x %08x %08x %08x\n",
le32_to_cpu(itd->hw_bufp[0]),
le32_to_cpu(itd->hw_bufp[1]),
le32_to_cpu(itd->hw_bufp[2]),
@@ -171,12 +171,12 @@
}
static void __attribute__((__unused__))
-dbg_sitd (const char *label, struct ehci_hcd *ehci, struct ehci_sitd *sitd)
+dbg_sitd (const char *label, struct ehci_hcd *ehci, struct ehci_sitd *sitd)
{
ehci_dbg (ehci, "%s [%d] sitd %p, next %08x, urb %p\n",
label, sitd->frame, sitd, le32_to_cpu(sitd->hw_next), sitd->urb);
ehci_dbg (ehci,
- " addr %08x sched %04x result %08x buf %08x %08x\n",
+ " addr %08x sched %04x result %08x buf %08x %08x\n",
le32_to_cpu(sitd->hw_fullspeed_ep),
le32_to_cpu(sitd->hw_uframe),
le32_to_cpu(sitd->hw_results),
@@ -451,7 +451,7 @@
*buf = 0;
bus = class_get_devdata(class_dev);
- hcd = bus->hcpriv;
+ hcd = bus_to_hcd(bus);
ehci = hcd_to_ehci (hcd);
next = buf;
size = PAGE_SIZE;
@@ -497,7 +497,7 @@
seen_count = 0;
bus = class_get_devdata(class_dev);
- hcd = bus->hcpriv;
+ hcd = bus_to_hcd(bus);
ehci = hcd_to_ehci (hcd);
next = buf;
size = PAGE_SIZE;
@@ -634,7 +634,7 @@
static char label [] = "";
bus = class_get_devdata(class_dev);
- hcd = bus->hcpriv;
+ hcd = bus_to_hcd(bus);
ehci = hcd_to_ehci (hcd);
next = buf;
size = PAGE_SIZE;
@@ -754,9 +754,7 @@
}
if (ehci->reclaim) {
- temp = scnprintf (next, size, "reclaim qh %p%s\n",
- ehci->reclaim,
- ehci->reclaim_ready ? " ready" : "");
+ temp = scnprintf (next, size, "reclaim qh %p\n", ehci->reclaim);
size -= temp;
next += temp;
}
@@ -785,10 +783,11 @@
static inline void create_debug_files (struct ehci_hcd *ehci)
{
struct class_device *cldev = ehci_to_hcd(ehci)->self.class_dev;
+ int retval;
- class_device_create_file(cldev, &class_device_attr_async);
- class_device_create_file(cldev, &class_device_attr_periodic);
- class_device_create_file(cldev, &class_device_attr_registers);
+ retval = class_device_create_file(cldev, &class_device_attr_async);
+ retval = class_device_create_file(cldev, &class_device_attr_periodic);
+ retval = class_device_create_file(cldev, &class_device_attr_registers);
}
static inline void remove_debug_files (struct ehci_hcd *ehci)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index d030516..1a915e9 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -285,6 +285,7 @@
.resume = ehci_bus_resume,
#endif
.stop = ehci_stop,
+ .shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -329,6 +330,7 @@
static struct platform_driver ehci_fsl_driver = {
.probe = ehci_fsl_drv_probe,
.remove = ehci_fsl_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "fsl-ehci",
},
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d63177a..5ac9185 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2000-2004 by David Brownell
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -70,7 +70,7 @@
* 2002-08-06 Handling for bulk and interrupt transfers is mostly shared;
* only scheduling is different, no arbitrary limitations.
* 2002-07-25 Sanity check PCI reads, mostly for better cardbus support,
- * clean up HC run state handshaking.
+ * clean up HC run state handshaking.
* 2002-05-24 Preliminary FS/LS interrupts, using scheduling shortcuts
* 2002-05-11 Clear TT errors for FS/LS ctrl/bulk. Fill in some other
* missing pieces: enabling 64bit dma, handoff from BIOS/SMM.
@@ -111,7 +111,7 @@
#define EHCI_TUNE_MULT_TT 1
#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */
-#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */
+#define EHCI_IAA_MSECS 10 /* arbitrary */
#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */
@@ -254,6 +254,7 @@
/*-------------------------------------------------------------------------*/
+static void end_unlink_async (struct ehci_hcd *ehci, struct pt_regs *regs);
static void ehci_work(struct ehci_hcd *ehci, struct pt_regs *regs);
#include "ehci-hub.c"
@@ -263,6 +264,29 @@
/*-------------------------------------------------------------------------*/
+static void ehci_iaa_watchdog (unsigned long param)
+{
+ struct ehci_hcd *ehci = (struct ehci_hcd *) param;
+ unsigned long flags;
+ u32 status;
+
+ spin_lock_irqsave (&ehci->lock, flags);
+ WARN_ON(!ehci->reclaim);
+
+ /* lost IAA irqs wedge things badly; seen first with a vt8235 */
+ if (ehci->reclaim) {
+ status = readl (&ehci->regs->status);
+ if (status & STS_IAA) {
+ ehci_vdbg (ehci, "lost IAA\n");
+ COUNT (ehci->stats.lost_iaa);
+ writel (STS_IAA, &ehci->regs->status);
+ end_unlink_async (ehci, NULL);
+ }
+ }
+
+ spin_unlock_irqrestore (&ehci->lock, flags);
+}
+
static void ehci_watchdog (unsigned long param)
{
struct ehci_hcd *ehci = (struct ehci_hcd *) param;
@@ -270,21 +294,9 @@
spin_lock_irqsave (&ehci->lock, flags);
- /* lost IAA irqs wedge things badly; seen with a vt8235 */
- if (ehci->reclaim) {
- u32 status = readl (&ehci->regs->status);
-
- if (status & STS_IAA) {
- ehci_vdbg (ehci, "lost IAA\n");
- COUNT (ehci->stats.lost_iaa);
- writel (STS_IAA, &ehci->regs->status);
- ehci->reclaim_ready = 1;
- }
- }
-
- /* stop async processing after it's idled a bit */
+ /* stop async processing after it's idled a bit */
if (test_bit (TIMER_ASYNC_OFF, &ehci->actions))
- start_unlink_async (ehci, ehci->async);
+ start_unlink_async (ehci, ehci->async);
/* ehci could run by timer, without IRQs ... */
ehci_work (ehci, NULL);
@@ -292,21 +304,20 @@
spin_unlock_irqrestore (&ehci->lock, flags);
}
-/* Reboot notifiers kick in for silicon on any bus (not just pci, etc).
+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
* This forcibly disables dma and IRQs, helping kexec and other cases
* where the next system software may expect clean state.
*/
-static int
-ehci_reboot (struct notifier_block *self, unsigned long code, void *null)
+static void
+ehci_shutdown (struct usb_hcd *hcd)
{
- struct ehci_hcd *ehci;
+ struct ehci_hcd *ehci;
- ehci = container_of (self, struct ehci_hcd, reboot_notifier);
+ ehci = hcd_to_ehci (hcd);
(void) ehci_halt (ehci);
/* make BIOS/etc use companion controller during reboot */
writel (0, &ehci->regs->configured_flag);
- return 0;
}
static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
@@ -334,8 +345,6 @@
static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
{
timer_action_done (ehci, TIMER_IO_WATCHDOG);
- if (ehci->reclaim_ready)
- end_unlink_async (ehci, regs);
/* another CPU may drop ehci->lock during a schedule scan while
* it reports urb completions. this flag guards against bogus
@@ -370,6 +379,7 @@
/* no more interrupts ... */
del_timer_sync (&ehci->watchdog);
+ del_timer_sync (&ehci->iaa_watchdog);
spin_lock_irq(&ehci->lock);
if (HC_IS_RUNNING (hcd->state))
@@ -381,7 +391,6 @@
/* let companion controllers work when we aren't */
writel (0, &ehci->regs->configured_flag);
- unregister_reboot_notifier (&ehci->reboot_notifier);
remove_debug_files (ehci);
@@ -417,6 +426,10 @@
ehci->watchdog.function = ehci_watchdog;
ehci->watchdog.data = (unsigned long) ehci;
+ init_timer(&ehci->iaa_watchdog);
+ ehci->iaa_watchdog.function = ehci_iaa_watchdog;
+ ehci->iaa_watchdog.data = (unsigned long) ehci;
+
/*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
@@ -427,13 +440,12 @@
/* controllers may cache some of the periodic schedule ... */
hcc_params = readl(&ehci->caps->hcc_params);
- if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
+ if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
ehci->i_thresh = 8;
else // N microframes cached
ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
ehci->reclaim = NULL;
- ehci->reclaim_ready = 0;
ehci->next_uframe = -1;
/*
@@ -483,9 +495,6 @@
}
ehci->command = temp;
- ehci->reboot_notifier.notifier_call = ehci_reboot;
- register_reboot_notifier(&ehci->reboot_notifier);
-
return 0;
}
@@ -499,7 +508,6 @@
/* EHCI spec section 4.1 */
if ((retval = ehci_reset(ehci)) != 0) {
- unregister_reboot_notifier(&ehci->reboot_notifier);
ehci_mem_cleanup(ehci);
return retval;
}
@@ -611,7 +619,7 @@
/* complete the unlinking of some qh [4.15.2.3] */
if (status & STS_IAA) {
COUNT (ehci->stats.reclaim);
- ehci->reclaim_ready = 1;
+ end_unlink_async (ehci, regs);
bh = 1;
}
@@ -715,10 +723,14 @@
static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
{
- /* if we need to use IAA and it's busy, defer */
- if (qh->qh_state == QH_STATE_LINKED
- && ehci->reclaim
- && HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) {
+ // BUG_ON(qh->qh_state != QH_STATE_LINKED);
+
+ /* failfast */
+ if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+ end_unlink_async (ehci, NULL);
+
+ /* defer till later if busy */
+ else if (ehci->reclaim) {
struct ehci_qh *last;
for (last = ehci->reclaim;
@@ -728,12 +740,8 @@
qh->qh_state = QH_STATE_UNLINK_WAIT;
last->reclaim = qh;
- /* bypass IAA if the hc can't care */
- } else if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && ehci->reclaim)
- end_unlink_async (ehci, NULL);
-
- /* something else might have unlinked the qh by now */
- if (qh->qh_state == QH_STATE_LINKED)
+ /* start IAA cycle */
+ } else
start_unlink_async (ehci, qh);
}
@@ -755,7 +763,19 @@
qh = (struct ehci_qh *) urb->hcpriv;
if (!qh)
break;
- unlink_async (ehci, qh);
+ switch (qh->qh_state) {
+ case QH_STATE_LINKED:
+ case QH_STATE_COMPLETING:
+ unlink_async (ehci, qh);
+ break;
+ case QH_STATE_UNLINK:
+ case QH_STATE_UNLINK_WAIT:
+ /* already started */
+ break;
+ case QH_STATE_IDLE:
+ WARN_ON(1);
+ break;
+ }
break;
case PIPE_INTERRUPT:
@@ -847,6 +867,7 @@
unlink_async (ehci, qh);
/* FALL THROUGH */
case QH_STATE_UNLINK: /* wait for hw to finish? */
+ case QH_STATE_UNLINK_WAIT:
idle_timeout:
spin_unlock_irqrestore (&ehci->lock, flags);
schedule_timeout_uninterruptible(1);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index d03e3ca..b2ee13c 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2001-2004 by David Brownell
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -48,7 +48,7 @@
}
ehci->command = readl (&ehci->regs->command);
if (ehci->reclaim)
- ehci->reclaim_ready = 1;
+ end_unlink_async (ehci, NULL);
ehci_work(ehci, NULL);
/* suspend any active/unsuspended ports, maybe allow wakeup */
@@ -103,10 +103,10 @@
/* re-init operational registers in case we lost power */
if (readl (&ehci->regs->intr_enable) == 0) {
- /* at least some APM implementations will try to deliver
+ /* at least some APM implementations will try to deliver
* IRQs right away, so delay them until we're ready.
- */
- intr_enable = 1;
+ */
+ intr_enable = 1;
writel (0, &ehci->regs->segment);
writel (ehci->periodic_dma, &ehci->regs->frame_list);
writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
@@ -232,7 +232,7 @@
buf [1] = 0;
retval++;
}
-
+
/* no hub change reports (bit 0) for now (power, ...) */
/* port N changes (bit N)? */
@@ -304,7 +304,7 @@
/*-------------------------------------------------------------------------*/
-#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
+#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
static int ehci_hub_control (
struct usb_hcd *hcd,
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 766061e..a8ba2e1 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2001 by David Brownell
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -25,7 +25,7 @@
* - data used only by the HCD ... kmalloc is fine
* - async and periodic schedules, shared by HC and HCD ... these
* need to use dma_pool or dma_alloc_coherent
- * - driver buffers, read/written by HC ... single shot DMA mapped
+ * - driver buffers, read/written by HC ... single shot DMA mapped
*
* There's also PCI "register" data, which is memory mapped.
* No memory seen by this driver is pageable.
@@ -119,7 +119,7 @@
/*-------------------------------------------------------------------------*/
-/* The queue heads and transfer descriptors are managed from pools tied
+/* The queue heads and transfer descriptors are managed from pools tied
* to each of the "per device" structures.
* This is the initialisation and cleanup code.
*/
@@ -165,7 +165,7 @@
int i;
/* QTDs for control/bulk/intr transfers */
- ehci->qtd_pool = dma_pool_create ("ehci_qtd",
+ ehci->qtd_pool = dma_pool_create ("ehci_qtd",
ehci_to_hcd(ehci)->self.controller,
sizeof (struct ehci_qtd),
32 /* byte alignment (for hw parts) */,
@@ -175,7 +175,7 @@
}
/* QHs for control/bulk/intr transfers */
- ehci->qh_pool = dma_pool_create ("ehci_qh",
+ ehci->qh_pool = dma_pool_create ("ehci_qh",
ehci_to_hcd(ehci)->self.controller,
sizeof (struct ehci_qh),
32 /* byte alignment (for hw parts) */,
@@ -189,7 +189,7 @@
}
/* ITD for high speed ISO transfers */
- ehci->itd_pool = dma_pool_create ("ehci_itd",
+ ehci->itd_pool = dma_pool_create ("ehci_itd",
ehci_to_hcd(ehci)->self.controller,
sizeof (struct ehci_itd),
32 /* byte alignment (for hw parts) */,
@@ -199,7 +199,7 @@
}
/* SITD for full/low speed split ISO transfers */
- ehci->sitd_pool = dma_pool_create ("ehci_sitd",
+ ehci->sitd_pool = dma_pool_create ("ehci_sitd",
ehci_to_hcd(ehci)->self.controller,
sizeof (struct ehci_sitd),
32 /* byte alignment (for hw parts) */,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index cadffac..08d0472 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -238,6 +238,12 @@
writel (0, &ehci->regs->intr_enable);
(void)readl(&ehci->regs->intr_enable);
+ /* make sure snapshot being resumed re-enumerates everything */
+ if (message.event == PM_EVENT_PRETHAW) {
+ ehci_halt(ehci);
+ ehci_reset(ehci);
+ }
+
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
bail:
spin_unlock_irqrestore (&ehci->lock, flags);
@@ -297,7 +303,7 @@
/* emptying the schedule aborts any urbs */
spin_lock_irq(&ehci->lock);
if (ehci->reclaim)
- ehci->reclaim_ready = 1;
+ end_unlink_async (ehci, NULL);
ehci_work(ehci, NULL);
spin_unlock_irq(&ehci->lock);
@@ -332,6 +338,7 @@
.resume = ehci_pci_resume,
#endif
.stop = ehci_stop,
+ .shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -378,4 +385,5 @@
.suspend = usb_hcd_pci_suspend,
.resume = usb_hcd_pci_resume,
#endif
+ .shutdown = usb_hcd_pci_shutdown,
};
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index e469221..7fc25b6 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2001-2004 by David Brownell
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -31,7 +31,7 @@
* ISO traffic uses "ISO TD" (itd, and sitd) records, and (along with
* interrupts) needs careful scheduling. Performance improvements can be
* an ongoing challenge. That's in "ehci-sched.c".
- *
+ *
* USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs,
* or otherwise through transaction translators (TTs) in USB 2.0 hubs using
* (b) special fields in qh entries or (c) split iso entries. TTs will
@@ -199,7 +199,7 @@
&& ((token & QTD_STS_MMF) != 0
|| QTD_CERR(token) == 0)
&& (!ehci_is_TDI(ehci)
- || urb->dev->tt->hub !=
+ || urb->dev->tt->hub !=
ehci_to_hcd(ehci)->self.root_hub)) {
#ifdef DEBUG
struct usb_device *tt = urb->dev->tt->hub;
@@ -364,7 +364,7 @@
*/
if (likely (urb->status == -EINPROGRESS))
continue;
-
+
/* issue status after short control reads */
if (unlikely (do_status != 0)
&& QTD_PID (token) == 0 /* OUT */) {
@@ -388,7 +388,7 @@
wmb ();
}
}
-
+
/* remove it from the queue */
spin_lock (&urb->lock);
qtd_copy_status (ehci, urb, qtd->length, token);
@@ -518,7 +518,7 @@
/* for zero length DATA stages, STATUS is always IN */
if (len == 0)
token |= (1 /* "in" */ << 8);
- }
+ }
/*
* data transfer stage: buffer setup
@@ -759,7 +759,7 @@
}
break;
default:
- dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed);
+ dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed);
done:
qh_put (qh);
return NULL;
@@ -967,17 +967,16 @@
struct ehci_qh *qh = ehci->reclaim;
struct ehci_qh *next;
- timer_action_done (ehci, TIMER_IAA_WATCHDOG);
+ iaa_watchdog_done (ehci);
// qh->hw_next = cpu_to_le32 (qh->qh_dma);
qh->qh_state = QH_STATE_IDLE;
qh->qh_next.qh = NULL;
- qh_put (qh); // refcount from reclaim
+ qh_put (qh); // refcount from reclaim
/* other unlink(s) may be pending (in QH_STATE_UNLINK_WAIT) */
next = qh->reclaim;
ehci->reclaim = next;
- ehci->reclaim_ready = 0;
qh->reclaim = NULL;
qh_completions (ehci, qh, regs);
@@ -1031,7 +1030,7 @@
timer_action_done (ehci, TIMER_ASYNC_OFF);
}
return;
- }
+ }
qh->qh_state = QH_STATE_UNLINK;
ehci->reclaim = qh = qh_get (qh);
@@ -1046,17 +1045,16 @@
if (unlikely (ehci_to_hcd(ehci)->state == HC_STATE_HALT)) {
/* if (unlikely (qh->reclaim != 0))
- * this will recurse, probably not much
+ * this will recurse, probably not much
*/
end_unlink_async (ehci, NULL);
return;
}
- ehci->reclaim_ready = 0;
cmd |= CMD_IAAD;
writel (cmd, &ehci->regs->command);
(void) readl (&ehci->regs->command);
- timer_action (ehci, TIMER_IAA_WATCHDOG);
+ iaa_watchdog_start (ehci);
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 4859900..e5e9c65 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2001-2004 by David Brownell
* Copyright (c) 2003 Michal Sojka, for high-speed iso transfers
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -613,7 +613,7 @@
/*-------------------------------------------------------------------------*/
static int check_period (
- struct ehci_hcd *ehci,
+ struct ehci_hcd *ehci,
unsigned frame,
unsigned uframe,
unsigned period,
@@ -629,7 +629,7 @@
/*
* 80% periodic == 100 usec/uframe available
- * convert "usecs we need" to "max already claimed"
+ * convert "usecs we need" to "max already claimed"
*/
usecs = 100 - usecs;
@@ -659,14 +659,14 @@
}
static int check_intr_schedule (
- struct ehci_hcd *ehci,
+ struct ehci_hcd *ehci,
unsigned frame,
unsigned uframe,
const struct ehci_qh *qh,
__le32 *c_maskp
)
{
- int retval = -ENOSPC;
+ int retval = -ENOSPC;
u8 mask = 0;
if (qh->c_usecs && uframe >= 6) /* FSTN territory? */
@@ -701,7 +701,7 @@
/* Make sure this tt's buffer is also available for CSPLITs.
* We pessimize a bit; probably the typical full speed case
* doesn't need the second CSPLIT.
- *
+ *
* NOTE: both SPLIT and CSPLIT could be checked in just
* one smart pass...
*/
@@ -728,7 +728,7 @@
*/
static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
{
- int status;
+ int status;
unsigned uframe;
__le32 c_mask;
unsigned frame; /* 0..(qh->period - 1), or NO_FRAME */
@@ -784,7 +784,7 @@
ehci_dbg (ehci, "reused qh %p schedule\n", qh);
/* stuff into the periodic schedule */
- status = qh_link_periodic (ehci, qh);
+ status = qh_link_periodic (ehci, qh);
done:
return status;
}
@@ -1681,7 +1681,7 @@
status = -ESHUTDOWN;
else
status = iso_stream_schedule (ehci, urb, stream);
- if (likely (status == 0))
+ if (likely (status == 0))
itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
spin_unlock_irqrestore (&ehci->lock, flags);
@@ -1738,7 +1738,7 @@
if (packet->buf1 != (buf & ~(u64)0x0fff))
packet->cross = 1;
- /* OUT uses multiple start-splits */
+ /* OUT uses multiple start-splits */
if (stream->bEndpointAddress & USB_DIR_IN)
continue;
length = (length + 187) / 188;
@@ -1925,7 +1925,7 @@
/*-------------------------------------------------------------------------*/
#define SITD_ERRS (SITD_STS_ERR | SITD_STS_DBE | SITD_STS_BABBLE \
- | SITD_STS_XACT | SITD_STS_MMF)
+ | SITD_STS_XACT | SITD_STS_MMF)
static unsigned
sitd_complete (
@@ -2043,7 +2043,7 @@
status = -ESHUTDOWN;
else
status = iso_stream_schedule (ehci, urb, stream);
- if (status == 0)
+ if (status == 0)
sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
spin_unlock_irqrestore (&ehci->lock, flags);
@@ -2226,5 +2226,5 @@
now_uframe++;
now_uframe %= mod;
}
- }
+ }
}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 679c1cd..6aac39f 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2001-2002 by David Brownell
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -58,7 +58,6 @@
/* async schedule support */
struct ehci_qh *async;
struct ehci_qh *reclaim;
- unsigned reclaim_ready : 1;
unsigned scanning : 1;
/* periodic schedule support */
@@ -81,8 +80,8 @@
struct dma_pool *itd_pool; /* itd per iso urb */
struct dma_pool *sitd_pool; /* sitd per split iso urb */
+ struct timer_list iaa_watchdog;
struct timer_list watchdog;
- struct notifier_block reboot_notifier;
unsigned long actions;
unsigned stamp;
unsigned long next_statechange;
@@ -104,7 +103,7 @@
#endif
};
-/* convert between an HCD pointer and the corresponding EHCI_HCD */
+/* convert between an HCD pointer and the corresponding EHCI_HCD */
static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
{
return (struct ehci_hcd *) (hcd->hcd_priv);
@@ -115,9 +114,21 @@
}
+static inline void
+iaa_watchdog_start (struct ehci_hcd *ehci)
+{
+ WARN_ON(timer_pending(&ehci->iaa_watchdog));
+ mod_timer (&ehci->iaa_watchdog,
+ jiffies + msecs_to_jiffies(EHCI_IAA_MSECS));
+}
+
+static inline void iaa_watchdog_done (struct ehci_hcd *ehci)
+{
+ del_timer (&ehci->iaa_watchdog);
+}
+
enum ehci_timer_action {
TIMER_IO_WATCHDOG,
- TIMER_IAA_WATCHDOG,
TIMER_ASYNC_SHRINK,
TIMER_ASYNC_OFF,
};
@@ -135,9 +146,6 @@
unsigned long t;
switch (action) {
- case TIMER_IAA_WATCHDOG:
- t = EHCI_IAA_JIFFIES;
- break;
case TIMER_IO_WATCHDOG:
t = EHCI_IO_JIFFIES;
break;
@@ -154,8 +162,7 @@
// async queue SHRINK often precedes IAA. while it's ready
// to go OFF neither can matter, and afterwards the IO
// watchdog stops unless there's still periodic traffic.
- if (action != TIMER_IAA_WATCHDOG
- && t > ehci->watchdog.expires
+ if (time_before_eq(t, ehci->watchdog.expires)
&& timer_pending (&ehci->watchdog))
return;
mod_timer (&ehci->watchdog, t);
@@ -179,8 +186,8 @@
#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
-#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
u32 hcc_params; /* HCCPARAMS - offset 0x8 */
@@ -205,7 +212,7 @@
#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
#define CMD_ASE (1<<5) /* async schedule enable */
-#define CMD_PSE (1<<4) /* periodic schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
/* 3:2 is periodic frame list size */
#define CMD_RESET (1<<1) /* reset HC not bus */
#define CMD_RUN (1<<0) /* start/stop HC */
@@ -231,9 +238,9 @@
/* FRINDEX: offset 0x0C */
u32 frame_index; /* current microframe number */
/* CTRLDSSEGMENT: offset 0x10 */
- u32 segment; /* address bits 63:32 if needed */
+ u32 segment; /* address bits 63:32 if needed */
/* PERIODICLISTBASE: offset 0x14 */
- u32 frame_list; /* points to periodic list */
+ u32 frame_list; /* points to periodic list */
/* ASYNCLISTADDR: offset 0x18 */
u32 async_next; /* address of next async queue head */
@@ -302,7 +309,7 @@
/*
* EHCI Specification 0.95 Section 3.5
- * QTD: describe data transfer components (buffer, direction, ...)
+ * QTD: describe data transfer components (buffer, direction, ...)
* See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
*
* These are associated only with "QH" (Queue Head) structures,
@@ -312,7 +319,7 @@
/* first part defined by EHCI spec */
__le32 hw_next; /* see EHCI 3.5.1 */
__le32 hw_alt_next; /* see EHCI 3.5.2 */
- __le32 hw_token; /* see EHCI 3.5.3 */
+ __le32 hw_token; /* see EHCI 3.5.3 */
#define QTD_TOGGLE (1 << 31) /* data toggle */
#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
#define QTD_IOC (1 << 15) /* interrupt on complete */
@@ -349,8 +356,8 @@
/* values for that type tag */
#define Q_TYPE_ITD __constant_cpu_to_le32 (0 << 1)
#define Q_TYPE_QH __constant_cpu_to_le32 (1 << 1)
-#define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1)
-#define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1)
+#define Q_TYPE_SITD __constant_cpu_to_le32 (2 << 1)
+#define Q_TYPE_FSTN __constant_cpu_to_le32 (3 << 1)
/* next async queue entry, or pointer to interrupt/periodic QH */
#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
@@ -367,7 +374,7 @@
* For entries in the async schedule, the type tag always says "qh".
*/
union ehci_shadow {
- struct ehci_qh *qh; /* Q_TYPE_QH */
+ struct ehci_qh *qh; /* Q_TYPE_QH */
struct ehci_itd *itd; /* Q_TYPE_ITD */
struct ehci_sitd *sitd; /* Q_TYPE_SITD */
struct ehci_fstn *fstn; /* Q_TYPE_FSTN */
@@ -397,7 +404,7 @@
#define QH_HUBPORT 0x3f800000
#define QH_MULT 0xc0000000
__le32 hw_current; /* qtd list - see EHCI 3.6.4 */
-
+
/* qtd overlay (hardware parts of a struct ehci_qtd) */
__le32 hw_qtd_next;
__le32 hw_alt_next;
@@ -472,7 +479,7 @@
struct list_head td_list; /* queued itds/sitds */
struct list_head free_list; /* list of unused itds/sitds */
struct usb_device *udev;
- struct usb_host_endpoint *ep;
+ struct usb_host_endpoint *ep;
/* output of (re)scheduling */
unsigned long start; /* jiffies */
@@ -492,8 +499,8 @@
unsigned bandwidth;
/* This is used to initialize iTD's hw_bufp fields */
- __le32 buf0;
- __le32 buf1;
+ __le32 buf0;
+ __le32 buf1;
__le32 buf2;
/* this is used to initialize sITD's tt info */
@@ -521,7 +528,7 @@
#define ITD_ACTIVE __constant_cpu_to_le32(EHCI_ISOC_ACTIVE)
- __le32 hw_bufp [7]; /* see EHCI 3.3.3 */
+ __le32 hw_bufp [7]; /* see EHCI 3.3.3 */
__le32 hw_bufp_hi [7]; /* Appendix B */
/* the rest is HCD-private */
@@ -542,7 +549,7 @@
/*-------------------------------------------------------------------------*/
/*
- * EHCI Specification 0.95 Section 3.4
+ * EHCI Specification 0.95 Section 3.4
* siTD, aka split-transaction isochronous Transfer Descriptor
* ... describe full speed iso xfers through TT in hubs
* see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 5147ed4..a72e041 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1204,10 +1204,10 @@
static int isp116x_open_seq(struct inode *inode, struct file *file)
{
- return single_open(file, isp116x_show_dbg, inode->u.generic_ip);
+ return single_open(file, isp116x_show_dbg, inode->i_private);
}
-static struct file_operations isp116x_debug_fops = {
+static const struct file_operations isp116x_debug_fops = {
.open = isp116x_open_seq,
.read = seq_read,
.llseek = seq_lseek,
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index a1b7c38..b91e2ed 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -233,7 +233,7 @@
/* Bit Stuff */ -EPROTO,
/* Data Togg */ -EILSEQ,
/* Stall */ -EPIPE,
- /* DevNotResp */ -ETIMEDOUT,
+ /* DevNotResp */ -ETIME,
/* PIDCheck */ -EPROTO,
/* UnExpPID */ -EPROTO,
/* DataOver */ -EOVERFLOW,
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 85cc059..b466581 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -193,7 +193,7 @@
if ((ret = ohci_init(ohci)) < 0)
return ret;
- root->maxchild = board->ports;
+ ohci->num_ports = board->ports;
if ((ret = ohci_run(ohci)) < 0) {
err("can't start %s", hcd->self.bus_name);
@@ -221,6 +221,7 @@
*/
.start = ohci_at91_start,
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -239,7 +240,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -296,6 +297,7 @@
if (!clocked) {
clk_enable(iclk);
clk_enable(fclk);
+ clocked = 1;
}
return 0;
@@ -310,6 +312,7 @@
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
.remove = ohci_hcd_at91_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,
.driver = {
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index f7a975d..24e23c5 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -268,11 +268,8 @@
* basic lifecycle operations
*/
.start = ohci_au1xxx_start,
-#ifdef CONFIG_PM
- /* suspend: ohci_au1xxx_suspend, -- tbd */
- /* resume: ohci_au1xxx_resume, -- tbd */
-#endif /*CONFIG_PM*/
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -291,6 +288,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -338,6 +336,7 @@
static struct platform_driver ohci_hcd_au1xxx_driver = {
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_au1xxx_drv_suspend, */
/*.resume = ohci_hcd_au1xxx_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 7bfffcb..8293c1d 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -477,7 +477,7 @@
unsigned long flags;
bus = class_get_devdata(class_dev);
- hcd = bus->hcpriv;
+ hcd = bus_to_hcd(bus);
ohci = hcd_to_ohci(hcd);
/* display control and bulk lists together, for simplicity */
@@ -510,7 +510,7 @@
seen_count = 0;
bus = class_get_devdata(class_dev);
- hcd = bus->hcpriv;
+ hcd = bus_to_hcd(bus);
ohci = hcd_to_ohci(hcd);
next = buf;
size = PAGE_SIZE;
@@ -607,7 +607,7 @@
u32 rdata;
bus = class_get_devdata(class_dev);
- hcd = bus->hcpriv;
+ hcd = bus_to_hcd(bus);
ohci = hcd_to_ohci(hcd);
regs = ohci->regs;
next = buf;
@@ -667,6 +667,11 @@
size -= temp;
next += temp;
+ temp = scnprintf (next, size, "hub poll timer %s\n",
+ ohci_to_hcd(ohci)->poll_rh ? "ON" : "off");
+ size -= temp;
+ next += temp;
+
/* roothub */
ohci_dump_roothub (ohci, 1, &next, &size);
@@ -680,10 +685,11 @@
static inline void create_debug_files (struct ohci_hcd *ohci)
{
struct class_device *cldev = ohci_to_hcd(ohci)->self.class_dev;
+ int retval;
- class_device_create_file(cldev, &class_device_attr_async);
- class_device_create_file(cldev, &class_device_attr_periodic);
- class_device_create_file(cldev, &class_device_attr_registers);
+ retval = class_device_create_file(cldev, &class_device_attr_async);
+ retval = class_device_create_file(cldev, &class_device_attr_periodic);
+ retval = class_device_create_file(cldev, &class_device_attr_registers);
ohci_dbg (ohci, "created debug files\n");
}
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 6531c4d..1bf5e7a 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -128,12 +128,14 @@
.flags = HCD_USB11 | HCD_MEMORY,
.start = ohci_ep93xx_start,
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -202,6 +204,7 @@
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_hcd_ep93xx_drv_suspend,
.resume = ohci_hcd_ep93xx_drv_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 94d8cf4..1027aa0 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -88,7 +88,7 @@
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/usb.h>
-#include <linux/usb_otg.h>
+#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/reboot.h>
@@ -101,7 +101,7 @@
#include "../core/hcd.h"
-#define DRIVER_VERSION "2005 April 22"
+#define DRIVER_VERSION "2006 August 04"
#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
@@ -110,9 +110,10 @@
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
#define OHCI_INTR_INIT \
- (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH)
+ (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
+ | OHCI_INTR_RD | OHCI_INTR_WDH)
#ifdef __hppa__
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
@@ -128,12 +129,13 @@
static const char hcd_name [] = "ohci_hcd";
+#define STATECHANGE_DELAY msecs_to_jiffies(300)
+
#include "ohci.h"
static void ohci_dump (struct ohci_hcd *ohci, int verbose);
static int ohci_init (struct ohci_hcd *ohci);
static void ohci_stop (struct usb_hcd *hcd);
-static int ohci_reboot (struct notifier_block *, unsigned long , void *);
#include "ohci-hub.c"
#include "ohci-dbg.c"
@@ -416,21 +418,20 @@
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
}
-/* reboot notifier forcibly disables IRQs and DMA, helping kexec and
+/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
* other cases where the next software may expect clean state from the
* "firmware". this is bus-neutral, unlike shutdown() methods.
*/
-static int
-ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
+static void
+ohci_shutdown (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci;
- ohci = container_of (block, struct ohci_hcd, reboot_notifier);
+ ohci = hcd_to_ohci (hcd);
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
ohci_usb_reset (ohci);
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
- return 0;
}
/*-------------------------------------------------------------------------*
@@ -446,7 +447,6 @@
disable (ohci);
ohci->regs = hcd->regs;
- ohci->next_statechange = jiffies;
/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
* was never needed for most non-PCI systems ... remove the code?
@@ -502,7 +502,6 @@
if ((ret = ohci_mem_init (ohci)) < 0)
ohci_stop (hcd);
else {
- register_reboot_notifier (&ohci->reboot_notifier);
create_debug_files (ohci);
}
@@ -637,10 +636,14 @@
return -EOVERFLOW;
}
- /* start controller operations */
+ /* use rhsc irqs after khubd is fully initialized */
+ hcd->poll_rh = 1;
+ hcd->uses_new_polling = 1;
+
+ /* start controller operations */
ohci->hc_control &= OHCI_CTRL_RWC;
- ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+ ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
hcd->state = HC_STATE_RUNNING;
/* wake on ConnectStatusChange, matching external hubs */
@@ -648,7 +651,7 @@
/* Choose the interrupts we care about now, others later on demand */
mask = OHCI_INTR_INIT;
- ohci_writel (ohci, mask, &ohci->regs->intrstatus);
+ ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
ohci_writel (ohci, mask, &ohci->regs->intrenable);
/* handle root hub init quirks ... */
@@ -672,6 +675,7 @@
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
spin_unlock_irq (&ohci->lock);
// POTPGT delay is bits 24-31, in 2 ms units.
@@ -709,7 +713,23 @@
/* interrupt for some other device? */
} else if ((ints &= ohci_readl (ohci, ®s->intrenable)) == 0) {
return IRQ_NOTMINE;
- }
+ }
+
+ /* NOTE: vendors didn't always make the same implementation
+ * choices for RHSC. Sometimes it triggers on an edge (like
+ * setting and maybe clearing a port status change bit); and
+ * it's level-triggered on other silicon, active until khubd
+ * clears all active port status change bits. Poll by timer
+ * til it's fully debounced and the difference won't matter.
+ */
+ if (ints & OHCI_INTR_RHSC) {
+ ohci_vdbg (ohci, "rhsc\n");
+ ohci_writel (ohci, OHCI_INTR_RHSC, ®s->intrdisable);
+ hcd->poll_rh = 1;
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+ ohci_writel (ohci, OHCI_INTR_RHSC, ®s->intrstatus);
+ usb_hcd_poll_rh_status(hcd);
+ }
if (ints & OHCI_INTR_UE) {
disable (ohci);
@@ -775,9 +795,10 @@
ohci_usb_reset (ohci);
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
+ free_irq(hcd->irq, hcd);
+ hcd->irq = -1;
+
remove_debug_files (ohci);
- unregister_reboot_notifier (&ohci->reboot_notifier);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
dma_free_coherent (hcd->self.controller,
@@ -917,6 +938,10 @@
#include "ohci-at91.c"
#endif
+#ifdef CONFIG_ARCH_PNX4008
+#include "ohci-pnx4008.c"
+#endif
+
#if !(defined(CONFIG_PCI) \
|| defined(CONFIG_SA1111) \
|| defined(CONFIG_ARCH_S3C2410) \
@@ -928,6 +953,7 @@
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
|| defined (CONFIG_ARCH_AT91SAM9261) \
+ || defined (CONFIG_ARCH_PNX4008) \
)
#error "missing bus glue for ohci-hcd"
#endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 5b0a23f..0b89933 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,6 +36,14 @@
/*-------------------------------------------------------------------------*/
+/* hcd->hub_irq_enable() */
+static void ohci_rhsc_enable (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+}
+
#ifdef CONFIG_PM
#define OHCI_SCHED_ENABLES \
@@ -123,10 +131,10 @@
/* no resumes until devices finish suspending */
ohci->next_statechange = jiffies + msecs_to_jiffies (5);
+ /* no timer polling */
+ hcd->poll_rh = 0;
+
done:
- /* external suspend vs self autosuspend ... same effect */
- if (status == 0)
- usb_hcd_suspend_root_hub(hcd);
spin_unlock_irqrestore (&ohci->lock, flags);
return status;
}
@@ -256,8 +264,8 @@
/* TRSMRCY */
msleep (10);
- /* keep it alive for ~5x suspend + resume costs */
- ohci->next_statechange = jiffies + msecs_to_jiffies (250);
+ /* keep it alive for more than ~5x suspend + resume costs */
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
/* maybe turn schedules back on */
enables = 0;
@@ -302,9 +310,10 @@
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int i, changed = 0, length = 1;
- int can_suspend = device_may_wakeup(&hcd->self.root_hub->dev);
+ int can_suspend;
unsigned long flags;
+ can_suspend = device_may_wakeup(&hcd->self.root_hub->dev);
spin_lock_irqsave (&ohci->lock, flags);
/* handle autosuspended root: finish resuming before
@@ -339,6 +348,10 @@
for (i = 0; i < ohci->num_ports; i++) {
u32 status = roothub_portstatus (ohci, i);
+ /* can't autosuspend with active ports */
+ if ((status & RH_PS_PES) && !(status & RH_PS_PSS))
+ can_suspend = 0;
+
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
changed = 1;
@@ -348,32 +361,41 @@
buf [1] |= 1 << (i - 7);
continue;
}
-
- /* can suspend if no ports are enabled; or if all all
- * enabled ports are suspended AND remote wakeup is on.
- */
- if (!(status & RH_PS_CCS))
- continue;
- if ((status & RH_PS_PSS) && can_suspend)
- continue;
- can_suspend = 0;
}
-done:
- spin_unlock_irqrestore (&ohci->lock, flags);
-#ifdef CONFIG_PM
- /* save power by suspending idle root hubs;
- * INTR_RD wakes us when there's work
+ /* after root hub changes, stop polling after debouncing
+ * for a while and maybe kicking in autosuspend
*/
- if (can_suspend
- && !changed
+ if (changed) {
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+ can_suspend = 0;
+ } else if (time_before (jiffies, ohci->next_statechange)) {
+ can_suspend = 0;
+ } else {
+#ifdef CONFIG_PM
+ can_suspend = can_suspend
&& !ohci->ed_rm_list
&& ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES)
& ohci->hc_control)
- == OHCI_USB_OPER
- && time_after (jiffies, ohci->next_statechange)
- && usb_trylock_device (hcd->self.root_hub) == 0
- ) {
+ == OHCI_USB_OPER;
+#endif
+ if (hcd->uses_new_polling) {
+ hcd->poll_rh = 0;
+ /* use INTR_RHSC iff INTR_RD won't apply */
+ if (!can_suspend)
+ ohci_writel (ohci, OHCI_INTR_RHSC,
+ &ohci->regs->intrenable);
+ }
+ }
+
+done:
+ spin_unlock_irqrestore (&ohci->lock, flags);
+
+#ifdef CONFIG_PM
+ /* save power by autosuspending idle root hubs;
+ * INTR_RD wakes us when there's work
+ */
+ if (can_suspend && usb_trylock_device (hcd->self.root_hub) == 0) {
ohci_vdbg (ohci, "autosuspend\n");
(void) ohci_bus_suspend (hcd);
usb_unlock_device (hcd->self.root_hub);
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 5602da9..e121d97 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -173,11 +173,8 @@
* basic lifecycle operations
*/
.start = ohci_lh7a404_start,
-#ifdef CONFIG_PM
- /* suspend: ohci_lh7a404_suspend, -- tbd */
- /* resume: ohci_lh7a404_resume, -- tbd */
-#endif /*CONFIG_PM*/
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -196,6 +193,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -244,6 +242,7 @@
static struct platform_driver ohci_hcd_lh7a404_driver = {
.probe = ohci_hcd_lh7a404_drv_probe,
.remove = ohci_hcd_lh7a404_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_lh7a404_drv_suspend, */
/*.resume = ohci_hcd_lh7a404_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index bfbe328..d976614 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -28,7 +28,6 @@
ohci->next_statechange = jiffies;
spin_lock_init (&ohci->lock);
INIT_LIST_HEAD (&ohci->pending);
- ohci->reboot_notifier.notifier_call = ohci_reboot;
}
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index c4c4bab..9c02177 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -4,7 +4,7 @@
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2005 David Brownell
* (C) Copyright 2002 Hewlett-Packard Company
- *
+ *
* OMAP Bus Glue
*
* Modified for OMAP by Tony Lindgren <tony@atomide.com>
@@ -66,15 +66,20 @@
extern int ocpi_enable(void);
static struct clk *usb_host_ck;
+static struct clk *usb_dc_ck;
+static int host_enabled;
+static int host_initialized;
static void omap_ohci_clock_power(int on)
{
if (on) {
+ clk_enable(usb_dc_ck);
clk_enable(usb_host_ck);
/* guesstimate for T5 == 1x 32K clock + APLL lock time */
udelay(100);
} else {
clk_disable(usb_host_ck);
+ clk_disable(usb_dc_ck);
}
}
@@ -87,14 +92,14 @@
if (on) {
if (machine_is_omap_innovator() && cpu_is_omap1510())
fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
- | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+ | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, LOW);
} else {
if (machine_is_omap_innovator() && cpu_is_omap1510())
fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
- & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+ & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, HIGH);
@@ -103,6 +108,7 @@
return 0;
}
+#ifdef CONFIG_ARCH_OMAP15XX
/*
* OMAP-1510 specific Local Bus clock on/off
*/
@@ -121,8 +127,8 @@
/*
* OMAP-1510 specific Local Bus initialization
* NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- * See also arch/mach-omap/memory.h for __virt_to_dma() and
- * __dma_to_virt() which need to match with the physical
+ * See also arch/mach-omap/memory.h for __virt_to_dma() and
+ * __dma_to_virt() which need to match with the physical
* Local Bus address below.
*/
static int omap_1510_local_bus_init(void)
@@ -130,7 +136,7 @@
unsigned int tlb;
unsigned long lbaddr, physaddr;
- omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+ omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
OMAP1510_LB_CLOCK_DIV);
/* Configure the Local Bus MMU table */
@@ -138,7 +144,7 @@
lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
physaddr = tlb * 0x00100000 + PHYS_OFFSET;
omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
- omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+ omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
OMAP1510_LB_MMU_CAM_L);
omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
@@ -152,6 +158,10 @@
return 0;
}
+#else
+#define omap_1510_local_bus_power(x) {}
+#define omap_1510_local_bus_init() {}
+#endif
#ifdef CONFIG_USB_OTG
@@ -173,13 +183,14 @@
/*-------------------------------------------------------------------------*/
-static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev)
+static int ohci_omap_init(struct usb_hcd *hcd)
{
- struct omap_usb_config *config = pdev->dev.platform_data;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct omap_usb_config *config = hcd->self.controller->platform_data;
int need_transceiver = (config->otg != 0);
int ret;
- dev_dbg(&pdev->dev, "starting USB Controller\n");
+ dev_dbg(hcd->self.controller, "starting USB Controller\n");
if (config->otg) {
ohci_to_hcd(ohci)->self.otg_port = config->otg;
@@ -200,7 +211,7 @@
if (ohci->transceiver) {
int status = otg_set_host(ohci->transceiver,
&ohci_to_hcd(ohci)->self);
- dev_dbg(&pdev->dev, "init %s transceiver, status %d\n",
+ dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
ohci->transceiver->label, status);
if (status) {
if (ohci->transceiver)
@@ -208,7 +219,7 @@
return status;
}
} else {
- dev_err(&pdev->dev, "can't find transceiver\n");
+ dev_err(hcd->self.controller, "can't find transceiver\n");
return -ENODEV;
}
}
@@ -247,6 +258,10 @@
}
ohci_writel(ohci, rh, &ohci->regs->roothub.a);
distrust_firmware = 0;
+ } else if (machine_is_nokia770()) {
+ /* We require a self-powered hub, which should have
+ * plenty of power. */
+ ohci_to_hcd(ohci)->power_budget = 0;
}
/* FIXME khubd hub requests should manage power switching */
@@ -260,21 +275,15 @@
return 0;
}
-static void omap_stop_hc(struct platform_device *pdev)
+static void ohci_omap_stop(struct usb_hcd *hcd)
{
- dev_dbg(&pdev->dev, "stopping USB Controller\n");
+ dev_dbg(hcd->self.controller, "stopping USB Controller\n");
omap_ohci_clock_power(0);
}
/*-------------------------------------------------------------------------*/
-void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *);
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
/**
* usb_hcd_omap_probe - initialize OMAP-based HCDs
* Context: !in_interrupt()
@@ -283,7 +292,7 @@
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
-int usb_hcd_omap_probe (const struct hc_driver *driver,
+static int usb_hcd_omap_probe (const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval, irq;
@@ -291,12 +300,12 @@
struct ohci_hcd *ohci;
if (pdev->num_resources != 2) {
- printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
+ printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
pdev->num_resources);
return -ENODEV;
}
- if (pdev->resource[0].flags != IORESOURCE_MEM
+ if (pdev->resource[0].flags != IORESOURCE_MEM
|| pdev->resource[1].flags != IORESOURCE_IRQ) {
printk(KERN_ERR "hcd probe: invalid resource type\n");
return -ENODEV;
@@ -306,6 +315,17 @@
if (IS_ERR(usb_host_ck))
return PTR_ERR(usb_host_ck);
+ if (!cpu_is_omap1510())
+ usb_dc_ck = clk_get(0, "usb_dc_ck");
+ else
+ usb_dc_ck = clk_get(0, "lb_ck");
+
+ if (IS_ERR(usb_dc_ck)) {
+ clk_put(usb_host_ck);
+ return PTR_ERR(usb_dc_ck);
+ }
+
+
hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id);
if (!hcd) {
retval = -ENOMEM;
@@ -325,9 +345,8 @@
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
- retval = omap_start_hc(ohci, pdev);
- if (retval < 0)
- goto err2;
+ host_initialized = 0;
+ host_enabled = 1;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -335,15 +354,21 @@
goto err2;
}
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
- if (retval == 0)
- return retval;
+ if (retval)
+ goto err2;
- omap_stop_hc(pdev);
+ host_initialized = 1;
+
+ if (!host_enabled)
+ omap_ohci_clock_power(0);
+
+ return 0;
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
err0:
+ clk_put(usb_dc_ck);
clk_put(usb_host_ck);
return retval;
}
@@ -359,31 +384,41 @@
* Reverses the effect of usb_hcd_omap_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
- *
*/
-void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
+static inline void
+usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
usb_remove_hcd(hcd);
+ if (ohci->transceiver) {
+ (void) otg_set_host(ohci->transceiver, 0);
+ put_device(ohci->transceiver->dev);
+ }
if (machine_is_omap_osk())
omap_free_gpio(9);
- omap_stop_hc(pdev);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
+ clk_put(usb_dc_ck);
clk_put(usb_host_ck);
}
/*-------------------------------------------------------------------------*/
-static int __devinit
+static int
ohci_omap_start (struct usb_hcd *hcd)
{
struct omap_usb_config *config;
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
+ if (!host_enabled)
+ return 0;
config = hcd->self.controller->platform_data;
- if (config->otg || config->rwc)
+ if (config->otg || config->rwc) {
+ ohci->hc_control = OHCI_CTRL_RWC;
writel(OHCI_CTRL_RWC, &ohci->regs->control);
+ }
if ((ret = ohci_run (ohci)) < 0) {
dev_err(hcd->self.controller, "can't start\n");
@@ -409,8 +444,10 @@
/*
* basic lifecycle operations
*/
+ .reset = ohci_omap_init,
.start = ohci_omap_start,
- .stop = ohci_stop,
+ .stop = ohci_omap_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -429,6 +466,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -446,13 +484,8 @@
static int ohci_hcd_omap_drv_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
usb_hcd_omap_remove(hcd, dev);
- if (ohci->transceiver) {
- (void) otg_set_host(ohci->transceiver, 0);
- put_device(ohci->transceiver->dev);
- }
platform_set_drvdata(dev, NULL);
return 0;
@@ -472,7 +505,7 @@
omap_ohci_clock_power(0);
ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
- dev->power.power_state = PMSG_SUSPEND;
+ dev->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
@@ -485,8 +518,8 @@
ohci->next_statechange = jiffies;
omap_ohci_clock_power(1);
- dev->power.power_state = PMSG_ON;
- usb_hcd_resume_root_hub(dev_get_drvdata(dev));
+ dev->dev.power.power_state = PMSG_ON;
+ usb_hcd_resume_root_hub(platform_get_drvdata(dev));
return 0;
}
@@ -500,6 +533,7 @@
static struct platform_driver ohci_hcd_omap_driver = {
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_omap_suspend,
.resume = ohci_omap_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index b268537..3732db7 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -135,6 +135,11 @@
}
ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
(void)ohci_readl(ohci, &ohci->regs->intrdisable);
+
+ /* make sure snapshot being resumed re-enumerates everything */
+ if (message.event == PM_EVENT_PRETHAW)
+ ohci_usb_reset(ohci);
+
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
bail:
spin_unlock_irqrestore (&ohci->lock, flags);
@@ -171,11 +176,14 @@
*/
.reset = ohci_pci_reset,
.start = ohci_pci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
#ifdef CONFIG_PM
+ /* these suspend/resume entries are for upstream PCI glue ONLY */
.suspend = ohci_pci_suspend,
.resume = ohci_pci_resume,
#endif
- .stop = ohci_stop,
/*
* managing i/o requests and associated device resources
@@ -194,6 +202,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -224,6 +233,8 @@
.suspend = usb_hcd_pci_suspend,
.resume = usb_hcd_pci_resume,
#endif
+
+ .shutdown = usb_hcd_pci_shutdown,
};
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
new file mode 100644
index 0000000..82cb22f
--- /dev/null
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -0,0 +1,476 @@
+/*
+ * drivers/usb/host/ohci-pnx4008.c
+ *
+ * driver for Philips PNX4008 USB Host
+ *
+ * Authors: Dmitry Chigirev <source@mvista.com>
+ * Vitaly Wool <vitalywool@gmail.com>
+ *
+ * register initialization is based on code examples provided by Philips
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * NOTE: This driver does not have suspend/resume functionality
+ * This driver is intended for engineering development purposes only
+ *
+ * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/platform.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/gpio.h>
+
+#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+
+/* USB_CTRL bit defines */
+#define USB_SLAVE_HCLK_EN (1 << 24)
+#define USB_HOST_NEED_CLK_EN (1 << 21)
+
+#define USB_OTG_CLK_CTRL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4)
+#define USB_OTG_CLK_STAT IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8)
+
+/* USB_OTG_CLK_CTRL bit defines */
+#define AHB_M_CLOCK_ON (1 << 4)
+#define OTG_CLOCK_ON (1 << 3)
+#define I2C_CLOCK_ON (1 << 2)
+#define DEV_CLOCK_ON (1 << 1)
+#define HOST_CLOCK_ON (1 << 0)
+
+#define USB_OTG_STAT_CONTROL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110)
+
+/* USB_OTG_STAT_CONTROL bit defines */
+#define TRANSPARENT_I2C_EN (1 << 7)
+#define HOST_EN (1 << 0)
+
+/* ISP1301 USB transceiver I2C registers */
+#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
+
+#define MC1_SPEED_REG (1 << 0)
+#define MC1_SUSPEND_REG (1 << 1)
+#define MC1_DAT_SE0 (1 << 2)
+#define MC1_TRANSPARENT (1 << 3)
+#define MC1_BDIS_ACON_EN (1 << 4)
+#define MC1_OE_INT_EN (1 << 5)
+#define MC1_UART_EN (1 << 6)
+#define MC1_MASK 0x7f
+
+#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
+
+#define MC2_GLOBAL_PWR_DN (1 << 0)
+#define MC2_SPD_SUSP_CTRL (1 << 1)
+#define MC2_BI_DI (1 << 2)
+#define MC2_TRANSP_BDIR0 (1 << 3)
+#define MC2_TRANSP_BDIR1 (1 << 4)
+#define MC2_AUDIO_EN (1 << 5)
+#define MC2_PSW_EN (1 << 6)
+#define MC2_EN2V7 (1 << 7)
+
+#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
+# define OTG1_DP_PULLUP (1 << 0)
+# define OTG1_DM_PULLUP (1 << 1)
+# define OTG1_DP_PULLDOWN (1 << 2)
+# define OTG1_DM_PULLDOWN (1 << 3)
+# define OTG1_ID_PULLDOWN (1 << 4)
+# define OTG1_VBUS_DRV (1 << 5)
+# define OTG1_VBUS_DISCHRG (1 << 6)
+# define OTG1_VBUS_CHRG (1 << 7)
+#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */
+# define OTG_B_SESS_END (1 << 6)
+# define OTG_B_SESS_VLD (1 << 7)
+
+#define ISP1301_I2C_ADDR 0x2C
+
+#define ISP1301_I2C_MODE_CONTROL_1 0x4
+#define ISP1301_I2C_MODE_CONTROL_2 0x12
+#define ISP1301_I2C_OTG_CONTROL_1 0x6
+#define ISP1301_I2C_OTG_CONTROL_2 0x10
+#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
+#define ISP1301_I2C_INTERRUPT_LATCH 0xA
+#define ISP1301_I2C_INTERRUPT_FALLING 0xC
+#define ISP1301_I2C_INTERRUPT_RISING 0xE
+#define ISP1301_I2C_REG_CLEAR_ADDR 1
+
+struct i2c_driver isp1301_driver;
+struct i2c_client *isp1301_i2c_client;
+
+extern int usb_disabled(void);
+extern int ocpi_enable(void);
+
+static struct clk *usb_clk;
+
+static int isp1301_probe(struct i2c_adapter *adap);
+static int isp1301_detach(struct i2c_client *client);
+static int isp1301_command(struct i2c_client *client, unsigned int cmd,
+ void *arg);
+
+static unsigned short normal_i2c[] =
+ { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
+static unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END };
+
+static struct i2c_client_address_data addr_data = {
+ .normal_i2c = normal_i2c,
+ .probe = dummy_i2c_addrlist,
+ .ignore = dummy_i2c_addrlist,
+};
+
+struct i2c_driver isp1301_driver = {
+ .id = I2C_DRIVERID_I2CDEV, /* Fake Id */
+ .class = I2C_CLASS_HWMON,
+ .attach_adapter = isp1301_probe,
+ .detach_client = isp1301_detach,
+ .command = isp1301_command
+};
+
+static int isp1301_attach(struct i2c_adapter *adap, int addr, int kind)
+{
+ struct i2c_client *c;
+
+ c = (struct i2c_client *)kzalloc(sizeof(*c), SLAB_KERNEL);
+
+ if (!c)
+ return -ENOMEM;
+
+ strcpy(c->name, "isp1301");
+ c->flags = 0;
+ c->addr = addr;
+ c->adapter = adap;
+ c->driver = &isp1301_driver;
+
+ isp1301_i2c_client = c;
+
+ return i2c_attach_client(c);
+}
+
+static int isp1301_probe(struct i2c_adapter *adap)
+{
+ return i2c_probe(adap, &addr_data, isp1301_attach);
+}
+
+static int isp1301_detach(struct i2c_client *client)
+{
+ i2c_detach_client(client);
+ kfree(isp1301_i2c_client);
+ return 0;
+}
+
+/* No commands defined */
+static int isp1301_command(struct i2c_client *client, unsigned int cmd,
+ void *arg)
+{
+ return 0;
+}
+
+static void i2c_write(u8 buf, u8 subaddr)
+{
+ char tmpbuf[2];
+
+ tmpbuf[0] = subaddr; /*register number */
+ tmpbuf[1] = buf; /*register data */
+ i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2);
+}
+
+static void isp1301_configure(void)
+{
+ /* PNX4008 only supports DAT_SE0 USB mode */
+ /* PNX4008 R2A requires setting the MAX603 to output 3.6V */
+ /* Power up externel charge-pump */
+
+ i2c_write(MC1_DAT_SE0 | MC1_SPEED_REG, ISP1301_I2C_MODE_CONTROL_1);
+ i2c_write(~(MC1_DAT_SE0 | MC1_SPEED_REG),
+ ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
+ i2c_write(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL,
+ ISP1301_I2C_MODE_CONTROL_2);
+ i2c_write(~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL),
+ ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR);
+ i2c_write(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN,
+ ISP1301_I2C_OTG_CONTROL_1);
+ i2c_write(~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN),
+ ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
+ i2c_write(0xFF,
+ ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR);
+ i2c_write(0xFF,
+ ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR);
+ i2c_write(0xFF,
+ ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR);
+
+}
+
+static inline void isp1301_vbus_on(void)
+{
+ i2c_write(OTG1_VBUS_DRV, ISP1301_I2C_OTG_CONTROL_1);
+}
+
+static inline void isp1301_vbus_off(void)
+{
+ i2c_write(OTG1_VBUS_DRV,
+ ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
+}
+
+static void pnx4008_start_hc(void)
+{
+ unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
+ __raw_writel(tmp, USB_OTG_STAT_CONTROL);
+ isp1301_vbus_on();
+}
+
+static void pnx4008_stop_hc(void)
+{
+ unsigned long tmp;
+ isp1301_vbus_off();
+ tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
+ __raw_writel(tmp, USB_OTG_STAT_CONTROL);
+}
+
+static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ if ((ret = ohci_init(ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run(ohci)) < 0) {
+ dev_err(hcd->self.controller, "can't start\n");
+ ohci_stop(hcd);
+ return ret;
+ }
+ return 0;
+}
+
+static const struct hc_driver ohci_pnx4008_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "pnx4008 OHCI",
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+ /*
+ * basic lifecycle operations
+ */
+ .start = ohci_pnx4008_start,
+ .stop = ohci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+
+ .start_port_reset = ohci_start_port_reset,
+};
+
+#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
+
+static void pnx4008_set_usb_bits(void)
+{
+ start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
+ start_int_ack(SE_USB_OTG_ATX_INT_N);
+ start_int_umask(SE_USB_OTG_ATX_INT_N);
+
+ start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
+ start_int_ack(SE_USB_OTG_TIMER_INT);
+ start_int_umask(SE_USB_OTG_TIMER_INT);
+
+ start_int_set_rising_edge(SE_USB_I2C_INT);
+ start_int_ack(SE_USB_I2C_INT);
+ start_int_umask(SE_USB_I2C_INT);
+
+ start_int_set_rising_edge(SE_USB_INT);
+ start_int_ack(SE_USB_INT);
+ start_int_umask(SE_USB_INT);
+
+ start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
+ start_int_ack(SE_USB_NEED_CLK_INT);
+ start_int_umask(SE_USB_NEED_CLK_INT);
+
+ start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
+ start_int_ack(SE_USB_AHB_NEED_CLK_INT);
+ start_int_umask(SE_USB_AHB_NEED_CLK_INT);
+}
+
+static void pnx4008_unset_usb_bits(void)
+{
+ start_int_mask(SE_USB_OTG_ATX_INT_N);
+ start_int_mask(SE_USB_OTG_TIMER_INT);
+ start_int_mask(SE_USB_I2C_INT);
+ start_int_mask(SE_USB_INT);
+ start_int_mask(SE_USB_NEED_CLK_INT);
+ start_int_mask(SE_USB_AHB_NEED_CLK_INT);
+}
+
+static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = 0;
+ struct ohci_hcd *ohci;
+ const struct hc_driver *driver = &ohci_pnx4008_hc_driver;
+
+ int ret = 0, irq;
+
+ dev_dbg(&pdev->dev, "%s: " DRIVER_INFO " (pnx4008)\n", hcd_name);
+ if (usb_disabled()) {
+ err("USB is disabled");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (pdev->num_resources != 2
+ || pdev->resource[0].flags != IORESOURCE_MEM
+ || pdev->resource[1].flags != IORESOURCE_IRQ) {
+ err("Invalid resource configuration");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Enable AHB slave USB clock, needed for further USB clock control */
+ __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
+
+ ret = i2c_add_driver(&isp1301_driver);
+ if (ret < 0) {
+ err("failed to connect I2C to ISP1301 USB Transceiver");
+ goto out;
+ }
+
+ isp1301_configure();
+
+ /* Enable USB PLL */
+ usb_clk = clk_get(&pdev->dev, "ck_pll5");
+ if (IS_ERR(usb_clk)) {
+ err("failed to acquire USB PLL");
+ ret = PTR_ERR(usb_clk);
+ goto out1;
+ }
+
+ ret = clk_enable(usb_clk);
+ if (ret < 0) {
+ err("failed to start USB PLL");
+ goto out2;
+ }
+
+ ret = clk_set_rate(usb_clk, 48000);
+ if (ret < 0) {
+ err("failed to set USB clock rate");
+ goto out3;
+ }
+
+ __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
+
+ /* Set to enable all needed USB clocks */
+ __raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL);
+
+ while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
+ USB_CLOCK_MASK) ;
+
+ hcd = usb_create_hcd (driver, &pdev->dev, pdev->dev.bus_id);
+ if (!hcd) {
+ err("Failed to allocate HC buffer");
+ ret = -ENOMEM;
+ goto out3;
+ }
+
+ /* Set all USB bits in the Start Enable register */
+ pnx4008_set_usb_bits();
+
+ hcd->rsrc_start = pdev->resource[0].start;
+ hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ dev_dbg(&pdev->dev, "request_mem_region failed\n");
+ ret = -ENOMEM;
+ goto out4;
+ }
+ hcd->regs = (void __iomem *)pdev->resource[0].start;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = -ENXIO;
+ goto out4;
+ }
+
+ hcd->self.hcpriv = (void *)hcd;
+
+ pnx4008_start_hc();
+ platform_set_drvdata(pdev, hcd);
+ ohci = hcd_to_ohci(hcd);
+ ohci_hcd_init(ohci);
+
+ dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
+ ret = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ if (ret == 0)
+ return ret;
+
+ pnx4008_stop_hc();
+out4:
+ pnx4008_unset_usb_bits();
+ usb_put_hcd(hcd);
+out3:
+ clk_disable(usb_clk);
+out2:
+ clk_put(usb_clk);
+out1:
+ i2c_del_driver(&isp1301_driver);
+out:
+ return ret;
+}
+
+static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ pnx4008_stop_hc();
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+ pnx4008_unset_usb_bits();
+ clk_disable(usb_clk);
+ clk_put(usb_clk);
+ i2c_del_driver(&isp1301_driver);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver usb_hcd_pnx4008_driver = {
+ .driver = {
+ .name = "usb-ohci",
+ },
+ .probe = usb_hcd_pnx4008_probe,
+ .remove = usb_hcd_pnx4008_remove,
+};
+
+static int __init usb_hcd_pnx4008_init(void)
+{
+ return platform_driver_register(&usb_hcd_pnx4008_driver);
+}
+
+static void __exit usb_hcd_pnx4008_cleanup(void)
+{
+ return platform_driver_unregister(&usb_hcd_pnx4008_driver);
+}
+
+module_init(usb_hcd_pnx4008_init);
+module_exit(usb_hcd_pnx4008_cleanup);
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 9fe56ff..d9d1ae2 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -148,6 +148,7 @@
*/
.start = ohci_ppc_soc_start,
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -166,6 +167,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -195,6 +197,7 @@
static struct platform_driver ohci_hcd_ppc_soc_driver = {
.probe = ohci_hcd_ppc_soc_drv_probe,
.remove = ohci_hcd_ppc_soc_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
/*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
/*.resume = ohci_hcd_ppc_soc_drv_resume,*/
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 6f559e1..e176b04 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -270,6 +270,7 @@
*/
.start = ohci_pxa27x_start,
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -288,6 +289,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -357,6 +359,7 @@
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_hcd_pxa27x_drv_suspend,
.resume = ohci_hcd_pxa27x_drv_resume,
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index d2fc696..59e4364 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -370,7 +370,7 @@
goto err_mem;
}
- usb_clk = clk_get(&dev->dev, "upll");
+ usb_clk = clk_get(&dev->dev, "usb-bus-host");
if (IS_ERR(usb_clk)) {
dev_err(&dev->dev, "cannot get usb-host clock\n");
retval = -ENOENT;
@@ -447,6 +447,7 @@
*/
.start = ohci_s3c2410_start,
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -465,6 +466,7 @@
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -490,6 +492,7 @@
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = ohci_hcd_s3c2410_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
/*.suspend = ohci_hcd_s3c2410_drv_suspend, */
/*.resume = ohci_hcd_s3c2410_drv_resume, */
.driver = {
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index ce3de10..71371de 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -212,10 +212,6 @@
* basic lifecycle operations
*/
.start = ohci_sa1111_start,
-#ifdef CONFIG_PM
- /* suspend: ohci_sa1111_suspend, -- tbd */
- /* resume: ohci_sa1111_resume, -- tbd */
-#endif
.stop = ohci_stop,
/*
@@ -235,6 +231,7 @@
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index caacf14..93fdc3c 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -159,7 +159,7 @@
/* Bit Stuff */ -EPROTO,
/* Data Togg */ -EILSEQ,
/* Stall */ -EPIPE,
- /* DevNotResp */ -ETIMEDOUT,
+ /* DevNotResp */ -ETIME,
/* PIDCheck */ -EPROTO,
/* UnExpPID */ -EPROTO,
/* DataOver */ -EOVERFLOW,
@@ -389,8 +389,6 @@
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
- struct notifier_block reboot_notifier;
-
unsigned long flags; /* for HC bugs */
#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index fa34092..3a586aa 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -597,7 +597,7 @@
/* error? retry, until "3 strikes" */
} else if (++ep->error_count >= 3) {
if (status & SL11H_STATMASK_TMOUT)
- urbstat = -ETIMEDOUT;
+ urbstat = -ETIME;
else if (status & SL11H_STATMASK_OVF)
urbstat = -EOVERFLOW;
else
@@ -1517,7 +1517,7 @@
return single_open(file, proc_sl811h_show, PDE(inode)->data);
}
-static struct file_operations proc_ops = {
+static const struct file_operations proc_ops = {
.open = proc_sl811h_open,
.read = seq_read,
.llseek = seq_lseek,
@@ -1783,10 +1783,15 @@
struct sl811 *sl811 = hcd_to_sl811(hcd);
int retval = 0;
- if (state.event == PM_EVENT_FREEZE)
+ switch (state.event) {
+ case PM_EVENT_FREEZE:
retval = sl811h_bus_suspend(hcd);
- else if (state.event == PM_EVENT_SUSPEND)
+ break;
+ case PM_EVENT_SUSPEND:
+ case PM_EVENT_PRETHAW: /* explicitly discard hw state */
port_power(sl811, 0);
+ break;
+ }
if (retval == 0)
dev->dev.power.power_state = state;
return retval;
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
new file mode 100644
index 0000000..cb2e2a6
--- /dev/null
+++ b/drivers/usb/host/u132-hcd.c
@@ -0,0 +1,3295 @@
+/*
+* Host Controller Driver for the Elan Digital Systems U132 adapter
+*
+* Copyright(C) 2006 Elan Digital Systems Limited
+* http://www.elandigitalsystems.com
+*
+* Author and Maintainer - Tony Olech - Elan Digital Systems
+* tony.olech@elandigitalsystems.com
+*
+* This program is free software;you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation, version 2.
+*
+*
+* This driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
+* based on various USB host drivers in the 2.6.15 linux kernel
+* with constant reference to the 3rd Edition of Linux Device Drivers
+* published by O'Reilly
+*
+* The U132 adapter is a USB to CardBus adapter specifically designed
+* for PC cards that contain an OHCI host controller. Typical PC cards
+* are the Orange Mobile 3G Option GlobeTrotter Fusion card.
+*
+* The U132 adapter will *NOT *work with PC cards that do not contain
+* an OHCI controller. A simple way to test whether a PC card has an
+* OHCI controller as an interface is to insert the PC card directly
+* into a laptop(or desktop) with a CardBus slot and if "lspci" shows
+* a new USB controller and "lsusb -v" shows a new OHCI Host Controller
+* then there is a good chance that the U132 adapter will support the
+* PC card.(you also need the specific client driver for the PC card)
+*
+* Please inform the Author and Maintainer about any PC cards that
+* contain OHCI Host Controller and work when directly connected to
+* an embedded CardBus slot but do not work when they are connected
+* via an ELAN U132 adapter.
+*
+*/
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/pci_ids.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include "../core/hcd.h"
+#include "ohci.h"
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
+ OHCI_INTR_WDH)
+MODULE_AUTHOR("Tony Olech - Elan Digital Systems Limited");
+MODULE_DESCRIPTION("U132 USB Host Controller Driver");
+MODULE_LICENSE("GPL");
+#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
+INT_MODULE_PARM(testing, 0);
+/* Some boards misreport power switching/overcurrent*/
+static int distrust_firmware = 1;
+module_param(distrust_firmware, bool, 0);
+MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
+ "t setup");
+DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
+/*
+* u132_module_lock exists to protect access to global variables
+*
+*/
+static struct semaphore u132_module_lock;
+static int u132_exiting = 0;
+static int u132_instances = 0;
+static struct list_head u132_static_list;
+/*
+* end of the global variables protected by u132_module_lock
+*/
+static struct workqueue_struct *workqueue;
+#define MAX_U132_PORTS 7
+#define MAX_U132_ADDRS 128
+#define MAX_U132_UDEVS 4
+#define MAX_U132_ENDPS 100
+#define MAX_U132_RINGS 4
+static const char *cc_to_text[16] = {
+ "No Error ",
+ "CRC Error ",
+ "Bit Stuff ",
+ "Data Togg ",
+ "Stall ",
+ "DevNotResp ",
+ "PIDCheck ",
+ "UnExpPID ",
+ "DataOver ",
+ "DataUnder ",
+ "(for hw) ",
+ "(for hw) ",
+ "BufferOver ",
+ "BuffUnder ",
+ "(for HCD) ",
+ "(for HCD) "
+};
+struct u132_port {
+ struct u132 *u132;
+ int reset;
+ int enable;
+ int power;
+ int Status;
+};
+struct u132_addr {
+ u8 address;
+};
+struct u132_udev {
+ struct kref kref;
+ struct usb_device *usb_device;
+ u8 enumeration;
+ u8 udev_number;
+ u8 usb_addr;
+ u8 portnumber;
+ u8 endp_number_in[16];
+ u8 endp_number_out[16];
+};
+#define ENDP_QUEUE_SHIFT 3
+#define ENDP_QUEUE_SIZE (1<<ENDP_QUEUE_SHIFT)
+#define ENDP_QUEUE_MASK (ENDP_QUEUE_SIZE-1)
+struct u132_urbq {
+ struct list_head urb_more;
+ struct urb *urb;
+};
+struct u132_spin {
+ spinlock_t slock;
+};
+struct u132_endp {
+ struct kref kref;
+ u8 udev_number;
+ u8 endp_number;
+ u8 usb_addr;
+ u8 usb_endp;
+ struct u132 *u132;
+ struct list_head endp_ring;
+ struct u132_ring *ring;
+ unsigned toggle_bits:2;
+ unsigned active:1;
+ unsigned delayed:1;
+ unsigned input:1;
+ unsigned output:1;
+ unsigned pipetype:2;
+ unsigned dequeueing:1;
+ unsigned edset_flush:1;
+ unsigned spare_bits:14;
+ unsigned long jiffies;
+ struct usb_host_endpoint *hep;
+ struct u132_spin queue_lock;
+ u16 queue_size;
+ u16 queue_last;
+ u16 queue_next;
+ struct urb *urb_list[ENDP_QUEUE_SIZE];
+ struct list_head urb_more;
+ struct work_struct scheduler;
+};
+struct u132_ring {
+ unsigned in_use:1;
+ unsigned length:7;
+ u8 number;
+ struct u132 *u132;
+ struct u132_endp *curr_endp;
+ struct work_struct scheduler;
+};
+#define OHCI_QUIRK_AMD756 0x01
+#define OHCI_QUIRK_SUPERIO 0x02
+#define OHCI_QUIRK_INITRESET 0x04
+#define OHCI_BIG_ENDIAN 0x08
+#define OHCI_QUIRK_ZFMICRO 0x10
+struct u132 {
+ struct kref kref;
+ struct list_head u132_list;
+ struct semaphore sw_lock;
+ struct semaphore scheduler_lock;
+ struct u132_platform_data *board;
+ struct platform_device *platform_dev;
+ struct u132_ring ring[MAX_U132_RINGS];
+ int sequence_num;
+ int going;
+ int power;
+ int reset;
+ int num_ports;
+ u32 hc_control;
+ u32 hc_fminterval;
+ u32 hc_roothub_status;
+ u32 hc_roothub_a;
+ u32 hc_roothub_portstatus[MAX_ROOT_PORTS];
+ int flags;
+ unsigned long next_statechange;
+ struct work_struct monitor;
+ int num_endpoints;
+ struct u132_addr addr[MAX_U132_ADDRS];
+ struct u132_udev udev[MAX_U132_UDEVS];
+ struct u132_port port[MAX_U132_PORTS];
+ struct u132_endp *endp[MAX_U132_ENDPS];
+};
+int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data);
+int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs,
+ u8 width, u32 *data);
+int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs,
+ u8 width, u32 data);
+/*
+* these can not be inlines because we need the structure offset!!
+* Does anyone have a better way?????
+*/
+#define u132_read_pcimem(u132, member, data) \
+ usb_ftdi_elan_read_pcimem(u132->platform_dev, offsetof(struct \
+ ohci_regs, member), 0, data);
+#define u132_write_pcimem(u132, member, data) \
+ usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
+ ohci_regs, member), 0, data);
+#define u132_write_pcimem_byte(u132, member, data) \
+ usb_ftdi_elan_write_pcimem(u132->platform_dev, offsetof(struct \
+ ohci_regs, member), 0x0e, data);
+static inline struct u132 *udev_to_u132(struct u132_udev *udev)
+{
+ u8 udev_number = udev->udev_number;
+ return container_of(udev, struct u132, udev[udev_number]);
+}
+
+static inline struct u132 *hcd_to_u132(struct usb_hcd *hcd)
+{
+ return (struct u132 *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *u132_to_hcd(struct u132 *u132)
+{
+ return container_of((void *)u132, struct usb_hcd, hcd_priv);
+}
+
+static inline void u132_disable(struct u132 *u132)
+{
+ u132_to_hcd(u132)->state = HC_STATE_HALT;
+}
+
+
+#define kref_to_u132(d) container_of(d, struct u132, kref)
+#define kref_to_u132_endp(d) container_of(d, struct u132_endp, kref)
+#define kref_to_u132_udev(d) container_of(d, struct u132_udev, kref)
+#include "../misc/usb_u132.h"
+static const char hcd_name[] = "u132_hcd";
+#define PORT_C_MASK ((USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE | \
+ USB_PORT_STAT_C_SUSPEND | USB_PORT_STAT_C_OVERCURRENT | \
+ USB_PORT_STAT_C_RESET) << 16)
+static void u132_hcd_delete(struct kref *kref)
+{
+ struct u132 *u132 = kref_to_u132(kref);
+ struct platform_device *pdev = u132->platform_dev;
+ struct usb_hcd *hcd = u132_to_hcd(u132);
+ u132->going += 1;
+ down(&u132_module_lock);
+ list_del_init(&u132->u132_list);
+ u132_instances -= 1;
+ up(&u132_module_lock);
+ dev_warn(&u132->platform_dev->dev, "FREEING the hcd=%p and thus the u13"
+ "2=%p going=%d pdev=%p\n", hcd, u132, u132->going, pdev);
+ usb_put_hcd(hcd);
+}
+
+static inline void u132_u132_put_kref(struct u132 *u132)
+{
+ kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static inline void u132_u132_init_kref(struct u132 *u132)
+{
+ kref_init(&u132->kref);
+}
+
+static void u132_udev_delete(struct kref *kref)
+{
+ struct u132_udev *udev = kref_to_u132_udev(kref);
+ udev->udev_number = 0;
+ udev->usb_device = NULL;
+ udev->usb_addr = 0;
+ udev->enumeration = 0;
+}
+
+static inline void u132_udev_put_kref(struct u132 *u132, struct u132_udev *udev)
+{
+ kref_put(&udev->kref, u132_udev_delete);
+}
+
+static inline void u132_udev_get_kref(struct u132 *u132, struct u132_udev *udev)
+{
+ kref_get(&udev->kref);
+}
+
+static inline void u132_udev_init_kref(struct u132 *u132,
+ struct u132_udev *udev)
+{
+ kref_init(&udev->kref);
+}
+
+static inline void u132_ring_put_kref(struct u132 *u132, struct u132_ring *ring)
+{
+ kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static void u132_ring_requeue_work(struct u132 *u132, struct u132_ring *ring,
+ unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(workqueue, &ring->scheduler, delta))
+ return;
+ } else if (queue_work(workqueue, &ring->scheduler))
+ return;
+ kref_put(&u132->kref, u132_hcd_delete);
+ return;
+}
+
+static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring,
+ unsigned int delta)
+{
+ kref_get(&u132->kref);
+ u132_ring_requeue_work(u132, ring, delta);
+ return;
+}
+
+static void u132_ring_cancel_work(struct u132 *u132, struct u132_ring *ring)
+{
+ if (cancel_delayed_work(&ring->scheduler)) {
+ kref_put(&u132->kref, u132_hcd_delete);
+ }
+}
+
+static void u132_endp_delete(struct kref *kref)
+{
+ struct u132_endp *endp = kref_to_u132_endp(kref);
+ struct u132 *u132 = endp->u132;
+ u8 usb_addr = endp->usb_addr;
+ u8 usb_endp = endp->usb_endp;
+ u8 address = u132->addr[usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ u8 endp_number = endp->endp_number;
+ struct usb_host_endpoint *hep = endp->hep;
+ struct u132_ring *ring = endp->ring;
+ struct list_head *head = &endp->endp_ring;
+ ring->length -= 1;
+ if (endp == ring->curr_endp) {
+ if (list_empty(head)) {
+ ring->curr_endp = NULL;
+ list_del(head);
+ } else {
+ struct u132_endp *next_endp = list_entry(head->next,
+ struct u132_endp, endp_ring);
+ ring->curr_endp = next_endp;
+ list_del(head);
+ }} else
+ list_del(head);
+ if (endp->input) {
+ udev->endp_number_in[usb_endp] = 0;
+ u132_udev_put_kref(u132, udev);
+ }
+ if (endp->output) {
+ udev->endp_number_out[usb_endp] = 0;
+ u132_udev_put_kref(u132, udev);
+ }
+ u132->endp[endp_number - 1] = NULL;
+ hep->hcpriv = NULL;
+ kfree(endp);
+ u132_u132_put_kref(u132);
+}
+
+static inline void u132_endp_put_kref(struct u132 *u132, struct u132_endp *endp)
+{
+ kref_put(&endp->kref, u132_endp_delete);
+}
+
+static inline void u132_endp_get_kref(struct u132 *u132, struct u132_endp *endp)
+{
+ kref_get(&endp->kref);
+}
+
+static inline void u132_endp_init_kref(struct u132 *u132,
+ struct u132_endp *endp)
+{
+ kref_init(&endp->kref);
+ kref_get(&u132->kref);
+}
+
+static void u132_endp_queue_work(struct u132 *u132, struct u132_endp *endp,
+ unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(workqueue, &endp->scheduler, delta))
+ kref_get(&endp->kref);
+ } else if (queue_work(workqueue, &endp->scheduler))
+ kref_get(&endp->kref);
+ return;
+}
+
+static void u132_endp_cancel_work(struct u132 *u132, struct u132_endp *endp)
+{
+ if (cancel_delayed_work(&endp->scheduler))
+ kref_put(&endp->kref, u132_endp_delete);
+}
+
+static inline void u132_monitor_put_kref(struct u132 *u132)
+{
+ kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static void u132_monitor_queue_work(struct u132 *u132, unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(workqueue, &u132->monitor, delta)) {
+ kref_get(&u132->kref);
+ }
+ } else if (queue_work(workqueue, &u132->monitor))
+ kref_get(&u132->kref);
+ return;
+}
+
+static void u132_monitor_requeue_work(struct u132 *u132, unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(workqueue, &u132->monitor, delta))
+ return;
+ } else if (queue_work(workqueue, &u132->monitor))
+ return;
+ kref_put(&u132->kref, u132_hcd_delete);
+ return;
+}
+
+static void u132_monitor_cancel_work(struct u132 *u132)
+{
+ if (cancel_delayed_work(&u132->monitor))
+ kref_put(&u132->kref, u132_hcd_delete);
+}
+
+static int read_roothub_info(struct u132 *u132)
+{
+ u32 revision;
+ int retval;
+ retval = u132_read_pcimem(u132, revision, &revision);
+ if (retval) {
+ dev_err(&u132->platform_dev->dev, "error %d accessing device co"
+ "ntrol\n", retval);
+ return retval;
+ } else if ((revision & 0xFF) == 0x10) {
+ } else if ((revision & 0xFF) == 0x11) {
+ } else {
+ dev_err(&u132->platform_dev->dev, "device revision is not valid"
+ " %08X\n", revision);
+ return -ENODEV;
+ }
+ retval = u132_read_pcimem(u132, control, &u132->hc_control);
+ if (retval) {
+ dev_err(&u132->platform_dev->dev, "error %d accessing device co"
+ "ntrol\n", retval);
+ return retval;
+ }
+ retval = u132_read_pcimem(u132, roothub.status,
+ &u132->hc_roothub_status);
+ if (retval) {
+ dev_err(&u132->platform_dev->dev, "error %d accessing device re"
+ "g roothub.status\n", retval);
+ return retval;
+ }
+ retval = u132_read_pcimem(u132, roothub.a, &u132->hc_roothub_a);
+ if (retval) {
+ dev_err(&u132->platform_dev->dev, "error %d accessing device re"
+ "g roothub.a\n", retval);
+ return retval;
+ }
+ {
+ int I = u132->num_ports;
+ int i = 0;
+ while (I-- > 0) {
+ retval = u132_read_pcimem(u132, roothub.portstatus[i],
+ &u132->hc_roothub_portstatus[i]);
+ if (retval) {
+ dev_err(&u132->platform_dev->dev, "error %d acc"
+ "essing device roothub.portstatus[%d]\n"
+ , retval, i);
+ return retval;
+ } else
+ i += 1;
+ }
+ }
+ return 0;
+}
+
+static void u132_hcd_monitor_work(void *data)
+{
+ struct u132 *u132 = data;
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ u132_monitor_put_kref(u132);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ u132_monitor_put_kref(u132);
+ return;
+ } else {
+ int retval;
+ down(&u132->sw_lock);
+ retval = read_roothub_info(u132);
+ if (retval) {
+ struct usb_hcd *hcd = u132_to_hcd(u132);
+ u132_disable(u132);
+ u132->going = 1;
+ up(&u132->sw_lock);
+ usb_hc_died(hcd);
+ ftdi_elan_gone_away(u132->platform_dev);
+ u132_monitor_put_kref(u132);
+ return;
+ } else {
+ u132_monitor_requeue_work(u132, 500);
+ up(&u132->sw_lock);
+ return;
+ }
+ }
+}
+
+static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp,
+ struct urb *urb, int status)
+{
+ struct u132_ring *ring;
+ unsigned long irqs;
+ struct usb_hcd *hcd = u132_to_hcd(u132);
+ urb->error_count = 0;
+ urb->status = status;
+ urb->hcpriv = NULL;
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ endp->queue_next += 1;
+ if (ENDP_QUEUE_SIZE > --endp->queue_size) {
+ endp->active = 0;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ } else {
+ struct list_head *next = endp->urb_more.next;
+ struct u132_urbq *urbq = list_entry(next, struct u132_urbq,
+ urb_more);
+ list_del(next);
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] =
+ urbq->urb;
+ endp->active = 0;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ kfree(urbq);
+ } down(&u132->scheduler_lock);
+ ring = endp->ring;
+ ring->in_use = 0;
+ u132_ring_cancel_work(u132, ring);
+ u132_ring_queue_work(u132, ring, 0);
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ usb_hcd_giveback_urb(hcd, urb, NULL);
+ return;
+}
+
+static void u132_hcd_forget_urb(struct u132 *u132, struct u132_endp *endp,
+ struct urb *urb, int status)
+{
+ u132_endp_put_kref(u132, endp);
+}
+
+static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp,
+ struct urb *urb, int status)
+{
+ unsigned long irqs;
+ struct usb_hcd *hcd = u132_to_hcd(u132);
+ urb->error_count = 0;
+ urb->status = status;
+ urb->hcpriv = NULL;
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ endp->queue_next += 1;
+ if (ENDP_QUEUE_SIZE > --endp->queue_size) {
+ endp->active = 0;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ } else {
+ struct list_head *next = endp->urb_more.next;
+ struct u132_urbq *urbq = list_entry(next, struct u132_urbq,
+ urb_more);
+ list_del(next);
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] =
+ urbq->urb;
+ endp->active = 0;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ kfree(urbq);
+ } usb_hcd_giveback_urb(hcd, urb, NULL);
+ return;
+}
+
+static inline int edset_input(struct u132 *u132, struct u132_ring *ring,
+ struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ return usb_ftdi_elan_edset_input(u132->platform_dev, ring->number, endp,
+ urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+static inline int edset_setup(struct u132 *u132, struct u132_ring *ring,
+ struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ return usb_ftdi_elan_edset_setup(u132->platform_dev, ring->number, endp,
+ urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+static inline int edset_single(struct u132 *u132, struct u132_ring *ring,
+ struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ return usb_ftdi_elan_edset_single(u132->platform_dev, ring->number,
+ endp, urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+static inline int edset_output(struct u132 *u132, struct u132_ring *ring,
+ struct u132_endp *endp, struct urb *urb, u8 address, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ return usb_ftdi_elan_edset_output(u132->platform_dev, ring->number,
+ endp, urb, address, endp->usb_endp, toggle_bits, callback);
+}
+
+
+/*
+* must not LOCK sw_lock
+*
+*/
+static void u132_hcd_interrupt_recv(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ struct u132_ring *ring = endp->ring;
+ u8 *u = urb->transfer_buffer + urb->actual_length;
+ u8 *b = buf;
+ int L = len;
+ while (L-- > 0) {
+ *u++ = *b++;
+ }
+ urb->actual_length += len;
+ if ((condition_code == TD_CC_NOERROR) &&
+ (urb->transfer_buffer_length > urb->actual_length)) {
+ endp->toggle_bits = toggle_bits;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+ 1 & toggle_bits);
+ if (urb->actual_length > 0) {
+ int retval;
+ up(&u132->scheduler_lock);
+ retval = edset_single(u132, ring, endp, urb,
+ address, endp->toggle_bits,
+ u132_hcd_interrupt_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb,
+ retval);
+ } else {
+ ring->in_use = 0;
+ endp->active = 0;
+ endp->jiffies = jiffies +
+ msecs_to_jiffies(urb->interval);
+ u132_ring_cancel_work(u132, ring);
+ u132_ring_queue_work(u132, ring, 0);
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ }
+ return;
+ } else if ((condition_code == TD_DATAUNDERRUN) &&
+ ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)) {
+ endp->toggle_bits = toggle_bits;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+ 1 & toggle_bits);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ } else {
+ if (condition_code == TD_CC_NOERROR) {
+ endp->toggle_bits = toggle_bits;
+ usb_settoggle(udev->usb_device, endp->usb_endp,
+ 0, 1 & toggle_bits);
+ } else if (condition_code == TD_CC_STALL) {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, endp->usb_endp,
+ 0, 0);
+ } else {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, endp->usb_endp,
+ 0, 0);
+ dev_err(&u132->platform_dev->dev, "urb=%p givin"
+ "g back INTERRUPT %s\n", urb,
+ cc_to_text[condition_code]);
+ }
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb,
+ cc_to_error[condition_code]);
+ return;
+ }
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_bulk_output_sent(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ struct u132_ring *ring = endp->ring;
+ urb->actual_length += len;
+ endp->toggle_bits = toggle_bits;
+ if (urb->transfer_buffer_length > urb->actual_length) {
+ int retval;
+ up(&u132->scheduler_lock);
+ retval = edset_output(u132, ring, endp, urb, address,
+ endp->toggle_bits, u132_hcd_bulk_output_sent);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else {
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ }
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_bulk_input_recv(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ struct u132_ring *ring = endp->ring;
+ u8 *u = urb->transfer_buffer + urb->actual_length;
+ u8 *b = buf;
+ int L = len;
+ while (L-- > 0) {
+ *u++ = *b++;
+ }
+ urb->actual_length += len;
+ if ((condition_code == TD_CC_NOERROR) &&
+ (urb->transfer_buffer_length > urb->actual_length)) {
+ int retval;
+ endp->toggle_bits = toggle_bits;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+ 1 & toggle_bits);
+ up(&u132->scheduler_lock);
+ retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+ ring->number, endp, urb, address,
+ endp->usb_endp, endp->toggle_bits,
+ u132_hcd_bulk_input_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else if (condition_code == TD_CC_NOERROR) {
+ endp->toggle_bits = toggle_bits;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+ 1 & toggle_bits);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb,
+ cc_to_error[condition_code]);
+ return;
+ } else if ((condition_code == TD_DATAUNDERRUN) &&
+ ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)) {
+ endp->toggle_bits = toggle_bits;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+ 1 & toggle_bits);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ } else if (condition_code == TD_DATAUNDERRUN) {
+ endp->toggle_bits = toggle_bits;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0,
+ 1 & toggle_bits);
+ dev_warn(&u132->platform_dev->dev, "urb=%p(SHORT NOT OK"
+ ") giving back BULK IN %s\n", urb,
+ cc_to_text[condition_code]);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ } else if (condition_code == TD_CC_STALL) {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0, 0);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb,
+ cc_to_error[condition_code]);
+ return;
+ } else {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, endp->usb_endp, 0, 0);
+ dev_err(&u132->platform_dev->dev, "urb=%p giving back B"
+ "ULK IN code=%d %s\n", urb, condition_code,
+ cc_to_text[condition_code]);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb,
+ cc_to_error[condition_code]);
+ return;
+ }
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_configure_empty_sent(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_configure_input_recv(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ struct u132_ring *ring = endp->ring;
+ u8 *u = urb->transfer_buffer;
+ u8 *b = buf;
+ int L = len;
+ while (L-- > 0) {
+ *u++ = *b++;
+ }
+ urb->actual_length = len;
+ if ((condition_code == TD_CC_NOERROR) || ((condition_code ==
+ TD_DATAUNDERRUN) && ((urb->transfer_flags &
+ URB_SHORT_NOT_OK) == 0))) {
+ int retval;
+ up(&u132->scheduler_lock);
+ retval = usb_ftdi_elan_edset_empty(u132->platform_dev,
+ ring->number, endp, urb, address,
+ endp->usb_endp, 0x3,
+ u132_hcd_configure_empty_sent);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else if (condition_code == TD_CC_STALL) {
+ up(&u132->scheduler_lock);
+ dev_warn(&u132->platform_dev->dev, "giving back SETUP I"
+ "NPUT STALL urb %p\n", urb);
+ u132_hcd_giveback_urb(u132, endp, urb,
+ cc_to_error[condition_code]);
+ return;
+ } else {
+ up(&u132->scheduler_lock);
+ dev_err(&u132->platform_dev->dev, "giving back SETUP IN"
+ "PUT %s urb %p\n", cc_to_text[condition_code],
+ urb);
+ u132_hcd_giveback_urb(u132, endp, urb,
+ cc_to_error[condition_code]);
+ return;
+ }
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_configure_empty_recv(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_configure_setup_sent(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ if (usb_pipein(urb->pipe)) {
+ int retval;
+ struct u132_ring *ring = endp->ring;
+ up(&u132->scheduler_lock);
+ retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+ ring->number, endp, urb, address,
+ endp->usb_endp, 0,
+ u132_hcd_configure_input_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else {
+ int retval;
+ struct u132_ring *ring = endp->ring;
+ up(&u132->scheduler_lock);
+ retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+ ring->number, endp, urb, address,
+ endp->usb_endp, 0,
+ u132_hcd_configure_empty_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ }
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_enumeration_empty_recv(void *data, struct urb *urb,
+ u8 *buf, int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ u132->addr[0].address = 0;
+ endp->usb_addr = udev->usb_addr;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_enumeration_address_sent(void *data, struct urb *urb,
+ u8 *buf, int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ int retval;
+ struct u132_ring *ring = endp->ring;
+ up(&u132->scheduler_lock);
+ retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+ ring->number, endp, urb, 0, endp->usb_endp, 0,
+ u132_hcd_enumeration_empty_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_initial_empty_sent(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, 0);
+ return;
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_initial_input_recv(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ int retval;
+ struct u132_ring *ring = endp->ring;
+ u8 *u = urb->transfer_buffer;
+ u8 *b = buf;
+ int L = len;
+ while (L-- > 0) {
+ *u++ = *b++;
+ }
+ urb->actual_length = len;
+ up(&u132->scheduler_lock);
+ retval = usb_ftdi_elan_edset_empty(u132->platform_dev,
+ ring->number, endp, urb, address, endp->usb_endp, 0x3,
+ u132_hcd_initial_empty_sent);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_initial_setup_sent(void *data, struct urb *urb, u8 *buf,
+ int len, int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual, int non_null)
+{
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ u8 address = u132->addr[endp->usb_addr].address;
+ down(&u132->scheduler_lock);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ up(&u132->scheduler_lock);
+ u132_hcd_forget_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (endp->dequeueing) {
+ endp->dequeueing = 0;
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -EINTR);
+ return;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, -ENODEV);
+ return;
+ } else if (urb->status == -EINPROGRESS) {
+ int retval;
+ struct u132_ring *ring = endp->ring;
+ up(&u132->scheduler_lock);
+ retval = usb_ftdi_elan_edset_input(u132->platform_dev,
+ ring->number, endp, urb, address, endp->usb_endp, 0,
+ u132_hcd_initial_input_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else {
+ dev_err(&u132->platform_dev->dev, "CALLBACK called urb=%p statu"
+ "s=%d\n", urb, urb->status);
+ up(&u132->scheduler_lock);
+ u132_hcd_giveback_urb(u132, endp, urb, urb->status);
+ return;
+ }
+}
+
+static void u132_hcd_ring_work_scheduler(void *data);
+static void u132_hcd_endp_work_scheduler(void *data);
+/*
+* this work function is only executed from the work queue
+*
+*/
+static void u132_hcd_ring_work_scheduler(void *data)
+{
+ struct u132_ring *ring = data;
+ struct u132 *u132 = ring->u132;
+ down(&u132->scheduler_lock);
+ if (ring->in_use) {
+ up(&u132->scheduler_lock);
+ u132_ring_put_kref(u132, ring);
+ return;
+ } else if (ring->curr_endp) {
+ struct u132_endp *last_endp = ring->curr_endp;
+ struct list_head *scan;
+ struct list_head *head = &last_endp->endp_ring;
+ unsigned long wakeup = 0;
+ list_for_each(scan, head) {
+ struct u132_endp *endp = list_entry(scan,
+ struct u132_endp, endp_ring);
+ if (endp->queue_next == endp->queue_last) {
+ } else if ((endp->delayed == 0)
+ || time_after_eq(jiffies, endp->jiffies)) {
+ ring->curr_endp = endp;
+ u132_endp_cancel_work(u132, last_endp);
+ u132_endp_queue_work(u132, last_endp, 0);
+ up(&u132->scheduler_lock);
+ u132_ring_put_kref(u132, ring);
+ return;
+ } else {
+ unsigned long delta = endp->jiffies - jiffies;
+ if (delta > wakeup)
+ wakeup = delta;
+ }
+ }
+ if (last_endp->queue_next == last_endp->queue_last) {
+ } else if ((last_endp->delayed == 0) || time_after_eq(jiffies,
+ last_endp->jiffies)) {
+ u132_endp_cancel_work(u132, last_endp);
+ u132_endp_queue_work(u132, last_endp, 0);
+ up(&u132->scheduler_lock);
+ u132_ring_put_kref(u132, ring);
+ return;
+ } else {
+ unsigned long delta = last_endp->jiffies - jiffies;
+ if (delta > wakeup)
+ wakeup = delta;
+ }
+ if (wakeup > 0) {
+ u132_ring_requeue_work(u132, ring, wakeup);
+ up(&u132->scheduler_lock);
+ return;
+ } else {
+ up(&u132->scheduler_lock);
+ u132_ring_put_kref(u132, ring);
+ return;
+ }
+ } else {
+ up(&u132->scheduler_lock);
+ u132_ring_put_kref(u132, ring);
+ return;
+ }
+}
+
+static void u132_hcd_endp_work_scheduler(void *data)
+{
+ struct u132_ring *ring;
+ struct u132_endp *endp = data;
+ struct u132 *u132 = endp->u132;
+ down(&u132->scheduler_lock);
+ ring = endp->ring;
+ if (endp->edset_flush) {
+ endp->edset_flush = 0;
+ if (endp->dequeueing)
+ usb_ftdi_elan_edset_flush(u132->platform_dev,
+ ring->number, endp);
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else if (endp->active) {
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else if (ring->in_use) {
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else if (endp->queue_next == endp->queue_last) {
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else if (endp->pipetype == PIPE_INTERRUPT) {
+ u8 address = u132->addr[endp->usb_addr].address;
+ if (ring->in_use) {
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else {
+ int retval;
+ struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+ endp->queue_next];
+ endp->active = 1;
+ ring->curr_endp = endp;
+ ring->in_use = 1;
+ up(&u132->scheduler_lock);
+ retval = edset_single(u132, ring, endp, urb, address,
+ endp->toggle_bits, u132_hcd_interrupt_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ }
+ } else if (endp->pipetype == PIPE_CONTROL) {
+ u8 address = u132->addr[endp->usb_addr].address;
+ if (ring->in_use) {
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else if (address == 0) {
+ int retval;
+ struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+ endp->queue_next];
+ endp->active = 1;
+ ring->curr_endp = endp;
+ ring->in_use = 1;
+ up(&u132->scheduler_lock);
+ retval = edset_setup(u132, ring, endp, urb, address,
+ 0x2, u132_hcd_initial_setup_sent);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else if (endp->usb_addr == 0) {
+ int retval;
+ struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+ endp->queue_next];
+ endp->active = 1;
+ ring->curr_endp = endp;
+ ring->in_use = 1;
+ up(&u132->scheduler_lock);
+ retval = edset_setup(u132, ring, endp, urb, 0, 0x2,
+ u132_hcd_enumeration_address_sent);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ } else {
+ int retval;
+ u8 address = u132->addr[endp->usb_addr].address;
+ struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
+ endp->queue_next];
+ endp->active = 1;
+ ring->curr_endp = endp;
+ ring->in_use = 1;
+ up(&u132->scheduler_lock);
+ retval = edset_setup(u132, ring, endp, urb, address,
+ 0x2, u132_hcd_configure_setup_sent);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb, retval);
+ return;
+ }
+ } else {
+ if (endp->input) {
+ u8 address = u132->addr[endp->usb_addr].address;
+ if (ring->in_use) {
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else {
+ int retval;
+ struct urb *urb = endp->urb_list[
+ ENDP_QUEUE_MASK & endp->queue_next];
+ endp->active = 1;
+ ring->curr_endp = endp;
+ ring->in_use = 1;
+ up(&u132->scheduler_lock);
+ retval = edset_input(u132, ring, endp, urb,
+ address, endp->toggle_bits,
+ u132_hcd_bulk_input_recv);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb,
+ retval);
+ return;
+ }
+ } else { /* output pipe */
+ u8 address = u132->addr[endp->usb_addr].address;
+ if (ring->in_use) {
+ up(&u132->scheduler_lock);
+ u132_endp_put_kref(u132, endp);
+ return;
+ } else {
+ int retval;
+ struct urb *urb = endp->urb_list[
+ ENDP_QUEUE_MASK & endp->queue_next];
+ endp->active = 1;
+ ring->curr_endp = endp;
+ ring->in_use = 1;
+ up(&u132->scheduler_lock);
+ retval = edset_output(u132, ring, endp, urb,
+ address, endp->toggle_bits,
+ u132_hcd_bulk_output_sent);
+ if (retval == 0) {
+ } else
+ u132_hcd_giveback_urb(u132, endp, urb,
+ retval);
+ return;
+ }
+ }
+ }
+}
+
+static void port_power(struct u132 *u132, int pn, int is_on)
+{
+ u132->port[pn].power = is_on;
+}
+
+static void u132_power(struct u132 *u132, int is_on)
+{
+ struct usb_hcd *hcd = u132_to_hcd(u132)
+ ; /* hub is inactive unless the port is powered */
+ if (is_on) {
+ if (u132->power)
+ return;
+ u132->power = 1;
+ hcd->self.controller->power.power_state = PMSG_ON;
+ } else {
+ u132->power = 0;
+ hcd->state = HC_STATE_HALT;
+ hcd->self.controller->power.power_state = PMSG_SUSPEND;
+ }
+}
+
+static int u132_periodic_reinit(struct u132 *u132)
+{
+ int retval;
+ u32 fi = u132->hc_fminterval & 0x03fff;
+ u32 fit;
+ u32 fminterval;
+ retval = u132_read_pcimem(u132, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ fit = fminterval & FIT;
+ retval = u132_write_pcimem(u132, fminterval,
+ (fit ^ FIT) | u132->hc_fminterval);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem(u132, periodicstart,
+ ((9 *fi) / 10) & 0x3fff);
+ if (retval)
+ return retval;
+ return 0;
+}
+
+static char *hcfs2string(int state)
+{
+ switch (state) {
+ case OHCI_USB_RESET:
+ return "reset";
+ case OHCI_USB_RESUME:
+ return "resume";
+ case OHCI_USB_OPER:
+ return "operational";
+ case OHCI_USB_SUSPEND:
+ return "suspend";
+ }
+ return "?";
+}
+
+static int u132_usb_reset(struct u132 *u132)
+{
+ int retval;
+ retval = u132_read_pcimem(u132, control, &u132->hc_control);
+ if (retval)
+ return retval;
+ u132->hc_control &= OHCI_CTRL_RWC;
+ retval = u132_write_pcimem(u132, control, u132->hc_control);
+ if (retval)
+ return retval;
+ return 0;
+}
+
+static int u132_init(struct u132 *u132)
+{
+ int retval;
+ u32 control;
+ u132_disable(u132);
+ u132->next_statechange =
+ jiffies; /* SMM owns the HC? not for long! */ {
+ u32 control;
+ retval = u132_read_pcimem(u132, control, &control);
+ if (retval)
+ return retval;
+ if (control & OHCI_CTRL_IR) {
+ u32 temp = 50;
+ retval = u132_write_pcimem(u132, intrenable,
+ OHCI_INTR_OC);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem_byte(u132, cmdstatus,
+ OHCI_OCR);
+ if (retval)
+ return retval;
+ check:{
+ retval = u132_read_pcimem(u132, control,
+ &control);
+ if (retval)
+ return retval;
+ }
+ if (control & OHCI_CTRL_IR) {
+ msleep(10);
+ if (--temp == 0) {
+ dev_err(&u132->platform_dev->dev, "USB "
+ "HC takeover failed!(BIOS/SMM b"
+ "ug) control=%08X\n", control);
+ return -EBUSY;
+ }
+ goto check;
+ }
+ u132_usb_reset(u132);
+ }
+ }
+ retval = u132_write_pcimem(u132, intrdisable, OHCI_INTR_MIE);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, control, &control);
+ if (retval)
+ return retval;
+ if (u132->num_ports == 0) {
+ u32 rh_a = -1;
+ retval = u132_read_pcimem(u132, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ u132->num_ports = rh_a & RH_A_NDP;
+ retval = read_roothub_info(u132);
+ if (retval)
+ return retval;
+ }
+ if (u132->num_ports > MAX_U132_PORTS) {
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+/* Start an OHCI controller, set the BUS operational
+* resets USB and controller
+* enable interrupts
+*/
+static int u132_run(struct u132 *u132)
+{
+ int retval;
+ u32 control;
+ u32 status;
+ u32 fminterval;
+ u32 periodicstart;
+ u32 cmdstatus;
+ u32 roothub_a;
+ int mask = OHCI_INTR_INIT;
+ int first = u132->hc_fminterval == 0;
+ int sleep_time = 0;
+ int reset_timeout = 30; /* ... allow extra time */
+ u132_disable(u132);
+ if (first) {
+ u32 temp;
+ retval = u132_read_pcimem(u132, fminterval, &temp);
+ if (retval)
+ return retval;
+ u132->hc_fminterval = temp & 0x3fff;
+ if (u132->hc_fminterval != FI) {
+ }
+ u132->hc_fminterval |= FSMP(u132->hc_fminterval) << 16;
+ }
+ retval = u132_read_pcimem(u132, control, &u132->hc_control);
+ if (retval)
+ return retval;
+ dev_info(&u132->platform_dev->dev, "resetting from state '%s', control "
+ "= %08X\n", hcfs2string(u132->hc_control & OHCI_CTRL_HCFS),
+ u132->hc_control);
+ switch (u132->hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ sleep_time = 0;
+ break;
+ case OHCI_USB_SUSPEND:
+ case OHCI_USB_RESUME:
+ u132->hc_control &= OHCI_CTRL_RWC;
+ u132->hc_control |= OHCI_USB_RESUME;
+ sleep_time = 10;
+ break;
+ default:
+ u132->hc_control &= OHCI_CTRL_RWC;
+ u132->hc_control |= OHCI_USB_RESET;
+ sleep_time = 50;
+ break;
+ }
+ retval = u132_write_pcimem(u132, control, u132->hc_control);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, control, &control);
+ if (retval)
+ return retval;
+ msleep(sleep_time);
+ retval = u132_read_pcimem(u132, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ if (!(roothub_a & RH_A_NPS)) {
+ int temp; /* power down each port */
+ for (temp = 0; temp < u132->num_ports; temp++) {
+ retval = u132_write_pcimem(u132,
+ roothub.portstatus[temp], RH_PS_LSDA);
+ if (retval)
+ return retval;
+ }
+ }
+ retval = u132_read_pcimem(u132, control, &control);
+ if (retval)
+ return retval;
+ retry:retval = u132_read_pcimem(u132, cmdstatus, &status);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_HCR);
+ if (retval)
+ return retval;
+ extra:{
+ retval = u132_read_pcimem(u132, cmdstatus, &status);
+ if (retval)
+ return retval;
+ if (0 != (status & OHCI_HCR)) {
+ if (--reset_timeout == 0) {
+ dev_err(&u132->platform_dev->dev, "USB HC reset"
+ " timed out!\n");
+ return -ENODEV;
+ } else {
+ msleep(5);
+ goto extra;
+ }
+ }
+ }
+ if (u132->flags & OHCI_QUIRK_INITRESET) {
+ retval = u132_write_pcimem(u132, control, u132->hc_control);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, control, &control);
+ if (retval)
+ return retval;
+ }
+ retval = u132_write_pcimem(u132, ed_controlhead, 0x00000000);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem(u132, ed_bulkhead, 0x11000000);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem(u132, hcca, 0x00000000);
+ if (retval)
+ return retval;
+ retval = u132_periodic_reinit(u132);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, fminterval, &fminterval);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, periodicstart, &periodicstart);
+ if (retval)
+ return retval;
+ if (0 == (fminterval & 0x3fff0000) || 0 == periodicstart) {
+ if (!(u132->flags & OHCI_QUIRK_INITRESET)) {
+ u132->flags |= OHCI_QUIRK_INITRESET;
+ goto retry;
+ } else
+ dev_err(&u132->platform_dev->dev, "init err(%08x %04x)"
+ "\n", fminterval, periodicstart);
+ } /* start controller operations */
+ u132->hc_control &= OHCI_CTRL_RWC;
+ u132->hc_control |= OHCI_CONTROL_INIT | OHCI_CTRL_BLE | OHCI_USB_OPER;
+ retval = u132_write_pcimem(u132, control, u132->hc_control);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem_byte(u132, cmdstatus, OHCI_BLF);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, cmdstatus, &cmdstatus);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, control, &control);
+ if (retval)
+ return retval;
+ u132_to_hcd(u132)->state = HC_STATE_RUNNING;
+ retval = u132_write_pcimem(u132, roothub.status, RH_HS_DRWE);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem(u132, intrstatus, mask);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem(u132, intrdisable,
+ OHCI_INTR_MIE | OHCI_INTR_OC | OHCI_INTR_RHSC | OHCI_INTR_FNO |
+ OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_SF | OHCI_INTR_WDH |
+ OHCI_INTR_SO);
+ if (retval)
+ return retval; /* handle root hub init quirks ... */
+ retval = u132_read_pcimem(u132, roothub.a, &roothub_a);
+ if (retval)
+ return retval;
+ roothub_a &= ~(RH_A_PSM | RH_A_OCPM);
+ if (u132->flags & OHCI_QUIRK_SUPERIO) {
+ roothub_a |= RH_A_NOCP;
+ roothub_a &= ~(RH_A_POTPGT | RH_A_NPS);
+ retval = u132_write_pcimem(u132, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ } else if ((u132->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
+ roothub_a |= RH_A_NPS;
+ retval = u132_write_pcimem(u132, roothub.a, roothub_a);
+ if (retval)
+ return retval;
+ }
+ retval = u132_write_pcimem(u132, roothub.status, RH_HS_LPSC);
+ if (retval)
+ return retval;
+ retval = u132_write_pcimem(u132, roothub.b,
+ (roothub_a & RH_A_NPS) ? 0 : RH_B_PPCM);
+ if (retval)
+ return retval;
+ retval = u132_read_pcimem(u132, control, &control);
+ if (retval)
+ return retval;
+ mdelay((roothub_a >> 23) & 0x1fe);
+ u132_to_hcd(u132)->state = HC_STATE_RUNNING;
+ return 0;
+}
+
+static void u132_hcd_stop(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
+ "ed\n", hcd);
+ } else {
+ down(&u132->sw_lock);
+ msleep(100);
+ u132_power(u132, 0);
+ up(&u132->sw_lock);
+ }
+}
+
+static int u132_hcd_start(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else if (hcd->self.controller) {
+ int retval;
+ struct platform_device *pdev =
+ to_platform_device(hcd->self.controller);
+ u16 vendor = ((struct u132_platform_data *)
+ (pdev->dev.platform_data))->vendor;
+ u16 device = ((struct u132_platform_data *)
+ (pdev->dev.platform_data))->device;
+ down(&u132->sw_lock);
+ msleep(10);
+ if (vendor == PCI_VENDOR_ID_AMD && device == 0x740c) {
+ u132->flags = OHCI_QUIRK_AMD756;
+ } else if (vendor == PCI_VENDOR_ID_OPTI && device == 0xc861) {
+ dev_err(&u132->platform_dev->dev, "WARNING: OPTi workar"
+ "ounds unavailable\n");
+ } else if (vendor == PCI_VENDOR_ID_COMPAQ && device == 0xa0f8)
+ u132->flags |= OHCI_QUIRK_ZFMICRO;
+ retval = u132_run(u132);
+ if (retval) {
+ u132_disable(u132);
+ u132->going = 1;
+ }
+ msleep(100);
+ up(&u132->sw_lock);
+ return retval;
+ } else {
+ dev_err(&u132->platform_dev->dev, "platform_device missing\n");
+ return -ENODEV;
+ }
+}
+
+static int u132_hcd_reset(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else {
+ int retval;
+ down(&u132->sw_lock);
+ retval = u132_init(u132);
+ if (retval) {
+ u132_disable(u132);
+ u132->going = 1;
+ }
+ up(&u132->sw_lock);
+ return retval;
+ }
+}
+
+static int create_endpoint_and_queue_int(struct u132 *u132,
+ struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb,
+ struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
+ gfp_t mem_flags)
+{
+ struct u132_ring *ring;
+ unsigned long irqs;
+ u8 endp_number = ++u132->num_endpoints;
+ struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
+ kmalloc(sizeof(struct u132_endp), mem_flags);
+ if (!endp) {
+ return -ENOMEM;
+ }
+ INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp);
+ spin_lock_init(&endp->queue_lock.slock);
+ INIT_LIST_HEAD(&endp->urb_more);
+ ring = endp->ring = &u132->ring[0];
+ if (ring->curr_endp) {
+ list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring);
+ } else {
+ INIT_LIST_HEAD(&endp->endp_ring);
+ ring->curr_endp = endp;
+ }
+ ring->length += 1;
+ endp->dequeueing = 0;
+ endp->edset_flush = 0;
+ endp->active = 0;
+ endp->delayed = 0;
+ endp->endp_number = endp_number;
+ endp->u132 = u132;
+ endp->hep = hep;
+ endp->pipetype = usb_pipetype(urb->pipe);
+ u132_endp_init_kref(u132, endp);
+ if (usb_pipein(urb->pipe)) {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, usb_endp, 0, 0);
+ endp->input = 1;
+ endp->output = 0;
+ udev->endp_number_in[usb_endp] = endp_number;
+ u132_udev_get_kref(u132, udev);
+ } else {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, usb_endp, 1, 0);
+ endp->input = 0;
+ endp->output = 1;
+ udev->endp_number_out[usb_endp] = endp_number;
+ u132_udev_get_kref(u132, udev);
+ }
+ urb->hcpriv = u132;
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ endp->delayed = 1;
+ endp->jiffies = jiffies + msecs_to_jiffies(urb->interval);
+ endp->udev_number = address;
+ endp->usb_addr = usb_addr;
+ endp->usb_endp = usb_endp;
+ endp->queue_size = 1;
+ endp->queue_last = 0;
+ endp->queue_next = 0;
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ u132_endp_queue_work(u132, endp, msecs_to_jiffies(urb->interval));
+ return 0;
+}
+
+static int queue_int_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
+ struct usb_host_endpoint *hep, struct urb *urb,
+ struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
+ u8 usb_endp, u8 address)
+{
+ urb->hcpriv = u132;
+ endp->delayed = 1;
+ endp->jiffies = jiffies + msecs_to_jiffies(urb->interval);
+ if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+ } else {
+ struct u132_urbq *urbq = kmalloc(sizeof(struct u132_urbq),
+ GFP_ATOMIC);
+ if (urbq == NULL) {
+ endp->queue_size -= 1;
+ return -ENOMEM;
+ } else {
+ list_add_tail(&urbq->urb_more, &endp->urb_more);
+ urbq->urb = urb;
+ }
+ }
+ return 0;
+}
+
+static int create_endpoint_and_queue_bulk(struct u132 *u132,
+ struct u132_udev *udev, struct usb_host_endpoint *hep, struct urb *urb,
+ struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp, u8 address,
+ gfp_t mem_flags)
+{
+ int ring_number;
+ struct u132_ring *ring;
+ unsigned long irqs;
+ u8 endp_number = ++u132->num_endpoints;
+ struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
+ kmalloc(sizeof(struct u132_endp), mem_flags);
+ if (!endp) {
+ return -ENOMEM;
+ }
+ INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp);
+ spin_lock_init(&endp->queue_lock.slock);
+ INIT_LIST_HEAD(&endp->urb_more);
+ endp->dequeueing = 0;
+ endp->edset_flush = 0;
+ endp->active = 0;
+ endp->delayed = 0;
+ endp->endp_number = endp_number;
+ endp->u132 = u132;
+ endp->hep = hep;
+ endp->pipetype = usb_pipetype(urb->pipe);
+ u132_endp_init_kref(u132, endp);
+ if (usb_pipein(urb->pipe)) {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, usb_endp, 0, 0);
+ ring_number = 3;
+ endp->input = 1;
+ endp->output = 0;
+ udev->endp_number_in[usb_endp] = endp_number;
+ u132_udev_get_kref(u132, udev);
+ } else {
+ endp->toggle_bits = 0x2;
+ usb_settoggle(udev->usb_device, usb_endp, 1, 0);
+ ring_number = 2;
+ endp->input = 0;
+ endp->output = 1;
+ udev->endp_number_out[usb_endp] = endp_number;
+ u132_udev_get_kref(u132, udev);
+ }
+ ring = endp->ring = &u132->ring[ring_number - 1];
+ if (ring->curr_endp) {
+ list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring);
+ } else {
+ INIT_LIST_HEAD(&endp->endp_ring);
+ ring->curr_endp = endp;
+ }
+ ring->length += 1;
+ urb->hcpriv = u132;
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ endp->udev_number = address;
+ endp->usb_addr = usb_addr;
+ endp->usb_endp = usb_endp;
+ endp->queue_size = 1;
+ endp->queue_last = 0;
+ endp->queue_next = 0;
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ u132_endp_queue_work(u132, endp, 0);
+ return 0;
+}
+
+static int queue_bulk_on_old_endpoint(struct u132 *u132, struct u132_udev *udev,
+ struct usb_host_endpoint *hep, struct urb *urb,
+ struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
+ u8 usb_endp, u8 address)
+{
+ urb->hcpriv = u132;
+ if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+ } else {
+ struct u132_urbq *urbq = kmalloc(sizeof(struct u132_urbq),
+ GFP_ATOMIC);
+ if (urbq == NULL) {
+ endp->queue_size -= 1;
+ return -ENOMEM;
+ } else {
+ list_add_tail(&urbq->urb_more, &endp->urb_more);
+ urbq->urb = urb;
+ }
+ }
+ return 0;
+}
+
+static int create_endpoint_and_queue_control(struct u132 *u132,
+ struct usb_host_endpoint *hep, struct urb *urb,
+ struct usb_device *usb_dev, u8 usb_addr, u8 usb_endp,
+ gfp_t mem_flags)
+{
+ struct u132_ring *ring;
+ u8 endp_number = ++u132->num_endpoints;
+ struct u132_endp *endp = hep->hcpriv = u132->endp[endp_number - 1] =
+ kmalloc(sizeof(struct u132_endp), mem_flags);
+ if (!endp) {
+ return -ENOMEM;
+ }
+ INIT_WORK(&endp->scheduler, u132_hcd_endp_work_scheduler, (void *)endp);
+ spin_lock_init(&endp->queue_lock.slock);
+ INIT_LIST_HEAD(&endp->urb_more);
+ ring = endp->ring = &u132->ring[0];
+ if (ring->curr_endp) {
+ list_add_tail(&endp->endp_ring, &ring->curr_endp->endp_ring);
+ } else {
+ INIT_LIST_HEAD(&endp->endp_ring);
+ ring->curr_endp = endp;
+ }
+ ring->length += 1;
+ endp->dequeueing = 0;
+ endp->edset_flush = 0;
+ endp->active = 0;
+ endp->delayed = 0;
+ endp->endp_number = endp_number;
+ endp->u132 = u132;
+ endp->hep = hep;
+ u132_endp_init_kref(u132, endp);
+ u132_endp_get_kref(u132, endp);
+ if (usb_addr == 0) {
+ unsigned long irqs;
+ u8 address = u132->addr[usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ endp->udev_number = address;
+ endp->usb_addr = usb_addr;
+ endp->usb_endp = usb_endp;
+ endp->input = 1;
+ endp->output = 1;
+ endp->pipetype = usb_pipetype(urb->pipe);
+ u132_udev_init_kref(u132, udev);
+ u132_udev_get_kref(u132, udev);
+ udev->endp_number_in[usb_endp] = endp_number;
+ udev->endp_number_out[usb_endp] = endp_number;
+ urb->hcpriv = u132;
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ endp->queue_size = 1;
+ endp->queue_last = 0;
+ endp->queue_next = 0;
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ u132_endp_queue_work(u132, endp, 0);
+ return 0;
+ } else { /*(usb_addr > 0) */
+ unsigned long irqs;
+ u8 address = u132->addr[usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ endp->udev_number = address;
+ endp->usb_addr = usb_addr;
+ endp->usb_endp = usb_endp;
+ endp->input = 1;
+ endp->output = 1;
+ endp->pipetype = usb_pipetype(urb->pipe);
+ u132_udev_get_kref(u132, udev);
+ udev->enumeration = 2;
+ udev->endp_number_in[usb_endp] = endp_number;
+ udev->endp_number_out[usb_endp] = endp_number;
+ urb->hcpriv = u132;
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ endp->queue_size = 1;
+ endp->queue_last = 0;
+ endp->queue_next = 0;
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] = urb;
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ u132_endp_queue_work(u132, endp, 0);
+ return 0;
+ }
+}
+
+static int queue_control_on_old_endpoint(struct u132 *u132,
+ struct usb_host_endpoint *hep, struct urb *urb,
+ struct usb_device *usb_dev, struct u132_endp *endp, u8 usb_addr,
+ u8 usb_endp)
+{
+ if (usb_addr == 0) {
+ if (usb_pipein(urb->pipe)) {
+ urb->hcpriv = u132;
+ if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+ endp->urb_list[ENDP_QUEUE_MASK &
+ endp->queue_last++] = urb;
+ } else {
+ struct u132_urbq *urbq =
+ kmalloc(sizeof(struct u132_urbq),
+ GFP_ATOMIC);
+ if (urbq == NULL) {
+ endp->queue_size -= 1;
+ return -ENOMEM;
+ } else {
+ list_add_tail(&urbq->urb_more,
+ &endp->urb_more);
+ urbq->urb = urb;
+ }
+ }
+ return 0;
+ } else { /* usb_pipeout(urb->pipe) */
+ struct u132_addr *addr = &u132->addr[usb_dev->devnum];
+ int I = MAX_U132_UDEVS;
+ int i = 0;
+ while (--I > 0) {
+ struct u132_udev *udev = &u132->udev[++i];
+ if (udev->usb_device) {
+ continue;
+ } else {
+ udev->enumeration = 1;
+ u132->addr[0].address = i;
+ endp->udev_number = i;
+ udev->udev_number = i;
+ udev->usb_addr = usb_dev->devnum;
+ u132_udev_init_kref(u132, udev);
+ udev->endp_number_in[usb_endp] =
+ endp->endp_number;
+ u132_udev_get_kref(u132, udev);
+ udev->endp_number_out[usb_endp] =
+ endp->endp_number;
+ udev->usb_device = usb_dev;
+ ((u8 *) (urb->setup_packet))[2] =
+ addr->address = i;
+ u132_udev_get_kref(u132, udev);
+ break;
+ }
+ }
+ if (I == 0) {
+ dev_err(&u132->platform_dev->dev, "run out of d"
+ "evice space\n");
+ return -EINVAL;
+ }
+ urb->hcpriv = u132;
+ if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+ endp->urb_list[ENDP_QUEUE_MASK &
+ endp->queue_last++] = urb;
+ } else {
+ struct u132_urbq *urbq =
+ kmalloc(sizeof(struct u132_urbq),
+ GFP_ATOMIC);
+ if (urbq == NULL) {
+ endp->queue_size -= 1;
+ return -ENOMEM;
+ } else {
+ list_add_tail(&urbq->urb_more,
+ &endp->urb_more);
+ urbq->urb = urb;
+ }
+ }
+ return 0;
+ }
+ } else { /*(usb_addr > 0) */
+ u8 address = u132->addr[usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ urb->hcpriv = u132;
+ if (udev->enumeration == 2) {
+ } else
+ udev->enumeration = 2;
+ if (endp->queue_size++ < ENDP_QUEUE_SIZE) {
+ endp->urb_list[ENDP_QUEUE_MASK & endp->queue_last++] =
+ urb;
+ } else {
+ struct u132_urbq *urbq =
+ kmalloc(sizeof(struct u132_urbq), GFP_ATOMIC);
+ if (urbq == NULL) {
+ endp->queue_size -= 1;
+ return -ENOMEM;
+ } else {
+ list_add_tail(&urbq->urb_more, &endp->urb_more);
+ urbq->urb = urb;
+ }
+ }
+ return 0;
+ }
+}
+
+static int u132_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep,
+ struct urb *urb, gfp_t mem_flags)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (irqs_disabled()) {
+ if (__GFP_WAIT & mem_flags) {
+ printk(KERN_ERR "invalid context for function that migh"
+ "t sleep\n");
+ return -EINVAL;
+ }
+ }
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed urb="
+ "%p status=%d\n", urb, urb->status);
+ return -ESHUTDOWN;
+ } else {
+ u8 usb_addr = usb_pipedevice(urb->pipe);
+ u8 usb_endp = usb_pipeendpoint(urb->pipe);
+ struct usb_device *usb_dev = urb->dev;
+ if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
+ u8 address = u132->addr[usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ struct u132_endp *endp = hep->hcpriv;
+ urb->actual_length = 0;
+ if (endp) {
+ unsigned long irqs;
+ int retval;
+ spin_lock_irqsave(&endp->queue_lock.slock,
+ irqs);
+ retval = queue_int_on_old_endpoint(u132, udev,
+ hep, urb, usb_dev, endp, usb_addr,
+ usb_endp, address);
+ spin_unlock_irqrestore(&endp->queue_lock.slock,
+ irqs);
+ if (retval) {
+ return retval;
+ } else {
+ u132_endp_queue_work(u132, endp,
+ msecs_to_jiffies(urb->interval))
+ ;
+ return 0;
+ }
+ } else if (u132->num_endpoints == MAX_U132_ENDPS) {
+ return -EINVAL;
+ } else { /*(endp == NULL) */
+ return create_endpoint_and_queue_int(u132, udev,
+ hep, urb, usb_dev, usb_addr, usb_endp,
+ address, mem_flags);
+ }
+ } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ dev_err(&u132->platform_dev->dev, "the hardware does no"
+ "t support PIPE_ISOCHRONOUS\n");
+ return -EINVAL;
+ } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
+ u8 address = u132->addr[usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ struct u132_endp *endp = hep->hcpriv;
+ urb->actual_length = 0;
+ if (endp) {
+ unsigned long irqs;
+ int retval;
+ spin_lock_irqsave(&endp->queue_lock.slock,
+ irqs);
+ retval = queue_bulk_on_old_endpoint(u132, udev,
+ hep, urb, usb_dev, endp, usb_addr,
+ usb_endp, address);
+ spin_unlock_irqrestore(&endp->queue_lock.slock,
+ irqs);
+ if (retval) {
+ return retval;
+ } else {
+ u132_endp_queue_work(u132, endp, 0);
+ return 0;
+ }
+ } else if (u132->num_endpoints == MAX_U132_ENDPS) {
+ return -EINVAL;
+ } else
+ return create_endpoint_and_queue_bulk(u132,
+ udev, hep, urb, usb_dev, usb_addr,
+ usb_endp, address, mem_flags);
+ } else {
+ struct u132_endp *endp = hep->hcpriv;
+ u16 urb_size = 8;
+ u8 *b = urb->setup_packet;
+ int i = 0;
+ char data[30 *3 + 4];
+ char *d = data;
+ int m = (sizeof(data) - 1) / 3;
+ int l = 0;
+ data[0] = 0;
+ while (urb_size-- > 0) {
+ if (i > m) {
+ } else if (i++ < m) {
+ int w = sprintf(d, " %02X", *b++);
+ d += w;
+ l += w;
+ } else
+ d += sprintf(d, " ..");
+ }
+ if (endp) {
+ unsigned long irqs;
+ int retval;
+ spin_lock_irqsave(&endp->queue_lock.slock,
+ irqs);
+ retval = queue_control_on_old_endpoint(u132,
+ hep, urb, usb_dev, endp, usb_addr,
+ usb_endp);
+ spin_unlock_irqrestore(&endp->queue_lock.slock,
+ irqs);
+ if (retval) {
+ return retval;
+ } else {
+ u132_endp_queue_work(u132, endp, 0);
+ return 0;
+ }
+ } else if (u132->num_endpoints == MAX_U132_ENDPS) {
+ return -EINVAL;
+ } else
+ return create_endpoint_and_queue_control(u132,
+ hep, urb, usb_dev, usb_addr, usb_endp,
+ mem_flags);
+ }
+ }
+}
+
+static int dequeue_from_overflow_chain(struct u132 *u132,
+ struct u132_endp *endp, struct urb *urb)
+{
+ struct list_head *scan;
+ struct list_head *head = &endp->urb_more;
+ list_for_each(scan, head) {
+ struct u132_urbq *urbq = list_entry(scan, struct u132_urbq,
+ urb_more);
+ if (urbq->urb == urb) {
+ struct usb_hcd *hcd = u132_to_hcd(u132);
+ list_del(scan);
+ endp->queue_size -= 1;
+ urb->error_count = 0;
+ urb->hcpriv = NULL;
+ usb_hcd_giveback_urb(hcd, urb, NULL);
+ return 0;
+ } else
+ continue;
+ }
+ dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]=%p ring"
+ "[%d] %c%c usb_endp=%d usb_addr=%d size=%d next=%04X last=%04X"
+ "\n", urb, endp->endp_number, endp, endp->ring->number,
+ endp->input ? 'I' : ' ', endp->output ? 'O' : ' ',
+ endp->usb_endp, endp->usb_addr, endp->queue_size,
+ endp->queue_next, endp->queue_last);
+ return -EINVAL;
+}
+
+static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp,
+ struct urb *urb)
+{
+ unsigned long irqs;
+ spin_lock_irqsave(&endp->queue_lock.slock, irqs);
+ if (endp->queue_size == 0) {
+ dev_err(&u132->platform_dev->dev, "urb=%p not found in endp[%d]"
+ "=%p ring[%d] %c%c usb_endp=%d usb_addr=%d\n", urb,
+ endp->endp_number, endp, endp->ring->number,
+ endp->input ? 'I' : ' ', endp->output ? 'O' : ' ',
+ endp->usb_endp, endp->usb_addr);
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ return -EINVAL;
+ }
+ if (urb == endp->urb_list[ENDP_QUEUE_MASK & endp->queue_next]) {
+ if (endp->active) {
+ endp->dequeueing = 1;
+ endp->edset_flush = 1;
+ u132_endp_queue_work(u132, endp, 0);
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ urb->hcpriv = NULL;
+ return 0;
+ } else {
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ u132_hcd_abandon_urb(u132, endp, urb, urb->status);
+ return 0;
+ }
+ } else {
+ u16 queue_list = 0;
+ u16 queue_size = endp->queue_size;
+ u16 queue_scan = endp->queue_next;
+ struct urb **urb_slot = NULL;
+ while (++queue_list < ENDP_QUEUE_SIZE && --queue_size > 0) {
+ if (urb == endp->urb_list[ENDP_QUEUE_MASK &
+ ++queue_scan]) {
+ urb_slot = &endp->urb_list[ENDP_QUEUE_MASK &
+ queue_scan];
+ break;
+ } else
+ continue;
+ }
+ while (++queue_list < ENDP_QUEUE_SIZE && --queue_size > 0) {
+ *urb_slot = endp->urb_list[ENDP_QUEUE_MASK &
+ ++queue_scan];
+ urb_slot = &endp->urb_list[ENDP_QUEUE_MASK &
+ queue_scan];
+ }
+ if (urb_slot) {
+ struct usb_hcd *hcd = u132_to_hcd(u132);
+ endp->queue_size -= 1;
+ if (list_empty(&endp->urb_more)) {
+ spin_unlock_irqrestore(&endp->queue_lock.slock,
+ irqs);
+ } else {
+ struct list_head *next = endp->urb_more.next;
+ struct u132_urbq *urbq = list_entry(next,
+ struct u132_urbq, urb_more);
+ list_del(next);
+ *urb_slot = urbq->urb;
+ spin_unlock_irqrestore(&endp->queue_lock.slock,
+ irqs);
+ kfree(urbq);
+ } urb->error_count = 0;
+ urb->hcpriv = NULL;
+ usb_hcd_giveback_urb(hcd, urb, NULL);
+ return 0;
+ } else if (list_empty(&endp->urb_more)) {
+ dev_err(&u132->platform_dev->dev, "urb=%p not found in "
+ "endp[%d]=%p ring[%d] %c%c usb_endp=%d usb_addr"
+ "=%d size=%d next=%04X last=%04X\n", urb,
+ endp->endp_number, endp, endp->ring->number,
+ endp->input ? 'I' : ' ',
+ endp->output ? 'O' : ' ', endp->usb_endp,
+ endp->usb_addr, endp->queue_size,
+ endp->queue_next, endp->queue_last);
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ return -EINVAL;
+ } else {
+ int retval = dequeue_from_overflow_chain(u132, endp,
+ urb);
+ spin_unlock_irqrestore(&endp->queue_lock.slock, irqs);
+ return retval;
+ }
+ }
+}
+
+static int u132_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 2) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else {
+ u8 usb_addr = usb_pipedevice(urb->pipe);
+ u8 usb_endp = usb_pipeendpoint(urb->pipe);
+ u8 address = u132->addr[usb_addr].address;
+ struct u132_udev *udev = &u132->udev[address];
+ if (usb_pipein(urb->pipe)) {
+ u8 endp_number = udev->endp_number_in[usb_endp];
+ struct u132_endp *endp = u132->endp[endp_number - 1];
+ return u132_endp_urb_dequeue(u132, endp, urb);
+ } else {
+ u8 endp_number = udev->endp_number_out[usb_endp];
+ struct u132_endp *endp = u132->endp[endp_number - 1];
+ return u132_endp_urb_dequeue(u132, endp, urb);
+ }
+ }
+}
+
+static void u132_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *hep)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 2) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ } else {
+ struct u132_endp *endp = hep->hcpriv;
+ if (endp)
+ u132_endp_put_kref(u132, endp);
+ }
+}
+
+static int u132_get_frame(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else {
+ int frame = 0;
+ dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n");
+ msleep(100);
+ return frame;
+ }
+}
+
+static int u132_roothub_descriptor(struct u132 *u132,
+ struct usb_hub_descriptor *desc)
+{
+ int retval;
+ u16 temp;
+ u32 rh_a = -1;
+ u32 rh_b = -1;
+ retval = u132_read_pcimem(u132, roothub.a, &rh_a);
+ if (retval)
+ return retval;
+ desc->bDescriptorType = 0x29;
+ desc->bPwrOn2PwrGood = (rh_a & RH_A_POTPGT) >> 24;
+ desc->bHubContrCurrent = 0;
+ desc->bNbrPorts = u132->num_ports;
+ temp = 1 + (u132->num_ports / 8);
+ desc->bDescLength = 7 + 2 *temp;
+ temp = 0;
+ if (rh_a & RH_A_NPS)
+ temp |= 0x0002;
+ if (rh_a & RH_A_PSM)
+ temp |= 0x0001;
+ if (rh_a & RH_A_NOCP) {
+ temp |= 0x0010;
+ } else if (rh_a & RH_A_OCPM)
+ temp |= 0x0008;
+ desc->wHubCharacteristics = cpu_to_le16(temp);
+ retval = u132_read_pcimem(u132, roothub.b, &rh_b);
+ if (retval)
+ return retval;
+ memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
+ desc->bitmap[0] = rh_b & RH_B_DR;
+ if (u132->num_ports > 7) {
+ desc->bitmap[1] = (rh_b & RH_B_DR) >> 8;
+ desc->bitmap[2] = 0xff;
+ } else
+ desc->bitmap[1] = 0xff;
+ return 0;
+}
+
+static int u132_roothub_status(struct u132 *u132, __le32 *desc)
+{
+ u32 rh_status = -1;
+ int ret_status = u132_read_pcimem(u132, roothub.status, &rh_status);
+ *desc = cpu_to_le32(rh_status);
+ return ret_status;
+}
+
+static int u132_roothub_portstatus(struct u132 *u132, __le32 *desc, u16 wIndex)
+{
+ if (wIndex == 0 || wIndex > u132->num_ports) {
+ return -EINVAL;
+ } else {
+ int port = wIndex - 1;
+ u32 rh_portstatus = -1;
+ int ret_portstatus = u132_read_pcimem(u132,
+ roothub.portstatus[port], &rh_portstatus);
+ *desc = cpu_to_le32(rh_portstatus);
+ if (*(u16 *) (desc + 2)) {
+ dev_info(&u132->platform_dev->dev, "Port %d Status Chan"
+ "ge = %08X\n", port, *desc);
+ }
+ return ret_portstatus;
+ }
+}
+
+
+/* this timer value might be vendor-specific ... */
+#define PORT_RESET_HW_MSEC 10
+#define PORT_RESET_MSEC 10
+/* wrap-aware logic morphed from <linux/jiffies.h> */
+#define tick_before(t1, t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
+static int u132_roothub_portreset(struct u132 *u132, int port_index)
+{
+ int retval;
+ u32 fmnumber;
+ u16 now;
+ u16 reset_done;
+ retval = u132_read_pcimem(u132, fmnumber, &fmnumber);
+ if (retval)
+ return retval;
+ now = fmnumber;
+ reset_done = now + PORT_RESET_MSEC;
+ do {
+ u32 portstat;
+ do {
+ retval = u132_read_pcimem(u132,
+ roothub.portstatus[port_index], &portstat);
+ if (retval)
+ return retval;
+ if (RH_PS_PRS & portstat) {
+ continue;
+ } else
+ break;
+ } while (tick_before(now, reset_done));
+ if (RH_PS_PRS & portstat)
+ return -ENODEV;
+ if (RH_PS_CCS & portstat) {
+ if (RH_PS_PRSC & portstat) {
+ retval = u132_write_pcimem(u132,
+ roothub.portstatus[port_index],
+ RH_PS_PRSC);
+ if (retval)
+ return retval;
+ }
+ } else
+ break; /* start the next reset,
+ sleep till it's probably done */
+ retval = u132_write_pcimem(u132, roothub.portstatus[port_index],
+ RH_PS_PRS);
+ if (retval)
+ return retval;
+ msleep(PORT_RESET_HW_MSEC);
+ retval = u132_read_pcimem(u132, fmnumber, &fmnumber);
+ if (retval)
+ return retval;
+ now = fmnumber;
+ } while (tick_before(now, reset_done));
+ return 0;
+}
+
+static int u132_roothub_setportfeature(struct u132 *u132, u16 wValue,
+ u16 wIndex)
+{
+ if (wIndex == 0 || wIndex > u132->num_ports) {
+ return -EINVAL;
+ } else {
+ int retval;
+ int port_index = wIndex - 1;
+ struct u132_port *port = &u132->port[port_index];
+ port->Status &= ~(1 << wValue);
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ retval = u132_write_pcimem(u132,
+ roothub.portstatus[port_index], RH_PS_PSS);
+ if (retval)
+ return retval;
+ return 0;
+ case USB_PORT_FEAT_POWER:
+ retval = u132_write_pcimem(u132,
+ roothub.portstatus[port_index], RH_PS_PPS);
+ if (retval)
+ return retval;
+ return 0;
+ case USB_PORT_FEAT_RESET:
+ retval = u132_roothub_portreset(u132, port_index);
+ if (retval)
+ return retval;
+ return 0;
+ default:
+ return -EPIPE;
+ }
+ }
+}
+
+static int u132_roothub_clearportfeature(struct u132 *u132, u16 wValue,
+ u16 wIndex)
+{
+ if (wIndex == 0 || wIndex > u132->num_ports) {
+ return -EINVAL;
+ } else {
+ int port_index = wIndex - 1;
+ u32 temp;
+ int retval;
+ struct u132_port *port = &u132->port[port_index];
+ port->Status &= ~(1 << wValue);
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ temp = RH_PS_CCS;
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ temp = RH_PS_PESC;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ temp = RH_PS_POCI;
+ if ((u132->hc_control & OHCI_CTRL_HCFS)
+ != OHCI_USB_OPER) {
+ dev_err(&u132->platform_dev->dev, "TODO resume_"
+ "root_hub\n");
+ }
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ temp = RH_PS_PSSC;
+ break;
+ case USB_PORT_FEAT_POWER:
+ temp = RH_PS_LSDA;
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ temp = RH_PS_CSC;
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ temp = RH_PS_OCIC;
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ temp = RH_PS_PRSC;
+ break;
+ default:
+ return -EPIPE;
+ }
+ retval = u132_write_pcimem(u132, roothub.portstatus[port_index],
+ temp);
+ if (retval)
+ return retval;
+ return 0;
+ }
+}
+
+
+/* the virtual root hub timer IRQ checks for hub status*/
+static int u132_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device hcd=%p has been remov"
+ "ed %d\n", hcd, u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device hcd=%p is being remov"
+ "ed\n", hcd);
+ dump_stack();
+ return -ESHUTDOWN;
+ } else {
+ int i, changed = 0, length = 1;
+ if (u132->flags & OHCI_QUIRK_AMD756) {
+ if ((u132->hc_roothub_a & RH_A_NDP) > MAX_ROOT_PORTS) {
+ dev_err(&u132->platform_dev->dev, "bogus NDP, r"
+ "ereads as NDP=%d\n",
+ u132->hc_roothub_a & RH_A_NDP);
+ goto done;
+ }
+ }
+ if (u132->hc_roothub_status & (RH_HS_LPSC | RH_HS_OCIC)) {
+ buf[0] = changed = 1;
+ } else
+ buf[0] = 0;
+ if (u132->num_ports > 7) {
+ buf[1] = 0;
+ length++;
+ }
+ for (i = 0; i < u132->num_ports; i++) {
+ if (u132->hc_roothub_portstatus[i] & (RH_PS_CSC |
+ RH_PS_PESC | RH_PS_PSSC | RH_PS_OCIC |
+ RH_PS_PRSC)) {
+ changed = 1;
+ if (i < 7) {
+ buf[0] |= 1 << (i + 1);
+ } else
+ buf[1] |= 1 << (i - 7);
+ continue;
+ }
+ if (!(u132->hc_roothub_portstatus[i] & RH_PS_CCS)) {
+ continue;
+ }
+ if ((u132->hc_roothub_portstatus[i] & RH_PS_PSS)) {
+ continue;
+ }
+ }
+ done:return changed ? length : 0;
+ }
+}
+
+static int u132_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else {
+ int retval = 0;
+ down(&u132->sw_lock);
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto stall;
+ }
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto stall;
+ }
+ break;
+ case ClearPortFeature:{
+ retval = u132_roothub_clearportfeature(u132,
+ wValue, wIndex);
+ if (retval)
+ goto error;
+ break;
+ }
+ case GetHubDescriptor:{
+ retval = u132_roothub_descriptor(u132,
+ (struct usb_hub_descriptor *)buf);
+ if (retval)
+ goto error;
+ break;
+ }
+ case GetHubStatus:{
+ retval = u132_roothub_status(u132,
+ (__le32 *) buf);
+ if (retval)
+ goto error;
+ break;
+ }
+ case GetPortStatus:{
+ retval = u132_roothub_portstatus(u132,
+ (__le32 *) buf, wIndex);
+ if (retval)
+ goto error;
+ break;
+ }
+ case SetPortFeature:{
+ retval = u132_roothub_setportfeature(u132,
+ wValue, wIndex);
+ if (retval)
+ goto error;
+ break;
+ }
+ default:
+ goto stall;
+ error:u132_disable(u132);
+ u132->going = 1;
+ break;
+ stall:retval = -EPIPE;
+ break;
+ }
+ up(&u132->sw_lock);
+ return retval;
+ }
+}
+
+static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else
+ return 0;
+}
+
+static void u132_hub_irq_enable(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ } else if (u132->going > 0)
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+}
+
+
+#ifdef CONFIG_PM
+static int u132_hcd_suspend(struct usb_hcd *hcd, pm_message_t message)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else
+ return 0;
+}
+
+static int u132_hcd_resume(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else
+ return 0;
+}
+
+static int u132_bus_suspend(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else
+ return 0;
+}
+
+static int u132_bus_resume(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else
+ return 0;
+}
+
+#else
+#define u132_hcd_suspend NULL
+#define u132_hcd_resume NULL
+#define u132_bus_suspend NULL
+#define u132_bus_resume NULL
+#endif
+static struct hc_driver u132_hc_driver = {
+ .description = hcd_name,
+ .hcd_priv_size = sizeof(struct u132),
+ .irq = NULL,
+ .flags = HCD_USB11 | HCD_MEMORY,
+ .reset = u132_hcd_reset,
+ .start = u132_hcd_start,
+ .suspend = u132_hcd_suspend,
+ .resume = u132_hcd_resume,
+ .stop = u132_hcd_stop,
+ .urb_enqueue = u132_urb_enqueue,
+ .urb_dequeue = u132_urb_dequeue,
+ .endpoint_disable = u132_endpoint_disable,
+ .get_frame_number = u132_get_frame,
+ .hub_status_data = u132_hub_status_data,
+ .hub_control = u132_hub_control,
+ .bus_suspend = u132_bus_suspend,
+ .bus_resume = u132_bus_resume,
+ .start_port_reset = u132_start_port_reset,
+ .hub_irq_enable = u132_hub_irq_enable,
+};
+
+/*
+* This function may be called by the USB core whilst the "usb_all_devices_rwsem"
+* is held for writing, thus this module must not call usb_remove_hcd()
+* synchronously - but instead should immediately stop activity to the
+* device and ansynchronously call usb_remove_hcd()
+*/
+static int __devexit u132_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ if (hcd) {
+ struct u132 *u132 = hcd_to_u132(hcd);
+ dump_stack();
+ if (u132->going++ > 1) {
+ return -ENODEV;
+ } else {
+ int rings = MAX_U132_RINGS;
+ int endps = MAX_U132_ENDPS;
+ msleep(100);
+ down(&u132->sw_lock);
+ u132_monitor_cancel_work(u132);
+ while (rings-- > 0) {
+ struct u132_ring *ring = &u132->ring[rings];
+ u132_ring_cancel_work(u132, ring);
+ } while (endps-- > 0) {
+ struct u132_endp *endp = u132->endp[endps];
+ if (endp)
+ u132_endp_cancel_work(u132, endp);
+ }
+ u132->going += 1;
+ printk(KERN_INFO "removing device u132.%d\n",
+ u132->sequence_num);
+ up(&u132->sw_lock);
+ usb_remove_hcd(hcd);
+ u132_u132_put_kref(u132);
+ return 0;
+ }
+ } else
+ return 0;
+}
+
+static void u132_initialise(struct u132 *u132, struct platform_device *pdev)
+{
+ int rings = MAX_U132_RINGS;
+ int ports = MAX_U132_PORTS;
+ int addrs = MAX_U132_ADDRS;
+ int udevs = MAX_U132_UDEVS;
+ int endps = MAX_U132_ENDPS;
+ u132->board = pdev->dev.platform_data;
+ u132->platform_dev = pdev;
+ u132->power = 0;
+ u132->reset = 0;
+ init_MUTEX(&u132->sw_lock);
+ init_MUTEX(&u132->scheduler_lock);
+ while (rings-- > 0) {
+ struct u132_ring *ring = &u132->ring[rings];
+ ring->u132 = u132;
+ ring->number = rings + 1;
+ ring->length = 0;
+ ring->curr_endp = NULL;
+ INIT_WORK(&ring->scheduler, u132_hcd_ring_work_scheduler,
+ (void *)ring);
+ } down(&u132->sw_lock);
+ INIT_WORK(&u132->monitor, u132_hcd_monitor_work, (void *)u132);
+ while (ports-- > 0) {
+ struct u132_port *port = &u132->port[ports];
+ port->u132 = u132;
+ port->reset = 0;
+ port->enable = 0;
+ port->power = 0;
+ port->Status = 0;
+ } while (addrs-- > 0) {
+ struct u132_addr *addr = &u132->addr[addrs];
+ addr->address = 0;
+ } while (udevs-- > 0) {
+ struct u132_udev *udev = &u132->udev[udevs];
+ int i = ARRAY_SIZE(udev->endp_number_in);
+ int o = ARRAY_SIZE(udev->endp_number_out);
+ udev->usb_device = NULL;
+ udev->udev_number = 0;
+ udev->usb_addr = 0;
+ udev->portnumber = 0;
+ while (i-- > 0) {
+ udev->endp_number_in[i] = 0;
+ }
+ while (o-- > 0) {
+ udev->endp_number_out[o] = 0;
+ }
+ }
+ while (endps-- > 0) {
+ u132->endp[endps] = NULL;
+ }
+ up(&u132->sw_lock);
+ return;
+}
+
+static int __devinit u132_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ msleep(100);
+ if (u132_exiting > 0) {
+ return -ENODEV;
+ } /* refuse to confuse usbcore */
+ if (pdev->dev.dma_mask) {
+ return -EINVAL;
+ }
+ hcd = usb_create_hcd(&u132_hc_driver, &pdev->dev, pdev->dev.bus_id);
+ if (!hcd) {
+ printk(KERN_ERR "failed to create the usb hcd struct for U132\n"
+ );
+ ftdi_elan_gone_away(pdev);
+ return -ENOMEM;
+ } else {
+ int retval = 0;
+ struct u132 *u132 = hcd_to_u132(hcd);
+ hcd->rsrc_start = 0;
+ down(&u132_module_lock);
+ list_add_tail(&u132->u132_list, &u132_static_list);
+ u132->sequence_num = ++u132_instances;
+ up(&u132_module_lock);
+ u132_u132_init_kref(u132);
+ u132_initialise(u132, pdev);
+ hcd->product_desc = "ELAN U132 Host Controller";
+ retval = usb_add_hcd(hcd, 0, 0);
+ if (retval != 0) {
+ dev_err(&u132->platform_dev->dev, "init error %d\n",
+ retval);
+ u132_u132_put_kref(u132);
+ return retval;
+ } else {
+ u132_monitor_queue_work(u132, 100);
+ return 0;
+ }
+ }
+}
+
+
+#ifdef CONFIG_PM
+/* for this device there's no useful distinction between the controller
+* and its root hub, except that the root hub only gets direct PM calls
+* when CONFIG_USB_SUSPEND is enabled.
+*/
+static int u132_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else {
+ int retval = 0;
+ if (state.event == PM_EVENT_FREEZE) {
+ retval = u132_bus_suspend(hcd);
+ } else if (state.event == PM_EVENT_SUSPEND) {
+ int ports = MAX_U132_PORTS;
+ while (ports-- > 0) {
+ port_power(u132, ports, 0);
+ }
+ }
+ if (retval == 0)
+ pdev->dev.power.power_state = state;
+ return retval;
+ }
+}
+
+static int u132_resume(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ return -ENODEV;
+ } else if (u132->going > 0) {
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+ return -ESHUTDOWN;
+ } else {
+ int retval = 0;
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ int ports = MAX_U132_PORTS;
+ while (ports-- > 0) {
+ port_power(u132, ports, 1);
+ }
+ retval = 0;
+ } else {
+ pdev->dev.power.power_state = PMSG_ON;
+ retval = u132_bus_resume(hcd);
+ }
+ return retval;
+ }
+}
+
+#else
+#define u132_suspend NULL
+#define u132_resume NULL
+#endif
+/*
+* this driver is loaded explicitely by ftdi_u132
+*
+* the platform_driver struct is static because it is per type of module
+*/
+static struct platform_driver u132_platform_driver = {
+ .probe = u132_probe,
+ .remove = __devexit_p(u132_remove),
+ .suspend = u132_suspend,
+ .resume = u132_resume,
+ .driver = {
+ .name = (char *)hcd_name,
+ .owner = THIS_MODULE,
+ },
+};
+static int __init u132_hcd_init(void)
+{
+ int retval;
+ INIT_LIST_HEAD(&u132_static_list);
+ u132_instances = 0;
+ u132_exiting = 0;
+ init_MUTEX(&u132_module_lock);
+ if (usb_disabled())
+ return -ENODEV;
+ printk(KERN_INFO "driver %s built at %s on %s\n", hcd_name, __TIME__,
+ __DATE__);
+ workqueue = create_singlethread_workqueue("u132");
+ retval = platform_driver_register(&u132_platform_driver);
+ return retval;
+}
+
+
+module_init(u132_hcd_init);
+static void __exit u132_hcd_exit(void)
+{
+ struct u132 *u132;
+ struct u132 *temp;
+ down(&u132_module_lock);
+ u132_exiting += 1;
+ up(&u132_module_lock);
+ list_for_each_entry_safe(u132, temp, &u132_static_list, u132_list) {
+ platform_device_unregister(u132->platform_dev);
+ } platform_driver_unregister(&u132_platform_driver);
+ printk(KERN_INFO "u132-hcd driver deregistered\n");
+ wait_event(u132_hcd_wait, u132_instances == 0);
+ flush_workqueue(workqueue);
+ destroy_workqueue(workqueue);
+}
+
+
+module_exit(u132_hcd_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index dc286a4..e345f15 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -16,7 +16,7 @@
#include "uhci-hcd.h"
-#define uhci_debug_operations (* (struct file_operations *) NULL)
+#define uhci_debug_operations (* (const struct file_operations *) NULL)
static struct dentry *uhci_debugfs_root;
#ifdef DEBUG
@@ -428,7 +428,7 @@
static int uhci_debug_open(struct inode *inode, struct file *file)
{
- struct uhci_hcd *uhci = inode->u.generic_ip;
+ struct uhci_hcd *uhci = inode->i_private;
struct uhci_debug *up;
int ret = -ENOMEM;
unsigned long flags;
@@ -500,7 +500,7 @@
}
#undef uhci_debug_operations
-static struct file_operations uhci_debug_operations = {
+static const struct file_operations uhci_debug_operations = {
.owner = THIS_MODULE,
.open = uhci_debug_open,
.llseek = uhci_debug_lseek,
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4151f61..eb4eab9 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -734,6 +734,10 @@
/* FIXME: Enable non-PME# remote wakeup? */
+ /* make sure snapshot being resumed re-enumerates everything */
+ if (message.event == PM_EVENT_PRETHAW)
+ uhci_hc_died(uhci);
+
done_okay:
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
done:
@@ -909,8 +913,7 @@
return 0;
init_failed:
- if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_privs were freed!");
+ kmem_cache_destroy(uhci_up_cachep);
up_failed:
debugfs_remove(uhci_debugfs_root);
@@ -926,10 +929,7 @@
static void __exit uhci_hcd_cleanup(void)
{
pci_unregister_driver(&uhci_pci_driver);
-
- if (kmem_cache_destroy(uhci_up_cachep))
- warn("not all urb_privs were freed!");
-
+ kmem_cache_destroy(uhci_up_cachep);
debugfs_remove(uhci_debugfs_root);
kfree(errbuf);
}
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index c545ef9..16fb72e 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -84,6 +84,7 @@
unsigned long port_addr)
{
int status;
+ int i;
if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
@@ -92,9 +93,14 @@
/* The controller won't actually turn off the RD bit until
* it has had a chance to send a low-speed EOP sequence,
- * which takes 3 bit times (= 2 microseconds). We'll delay
- * slightly longer for good luck. */
- udelay(4);
+ * which is supposed to take 3 bit times (= 2 microseconds).
+ * Experiments show that some controllers take longer, so
+ * we'll poll for completion. */
+ for (i = 0; i < 10; ++i) {
+ if (!(inw(port_addr) & USBPORTSC_RD))
+ break;
+ udelay(1);
+ }
}
clear_bit(port, &uhci->resuming_ports);
}
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 08daf40..ca6305c 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -424,7 +424,7 @@
***************************************************************************/
static struct usb_driver mdc800_usb_driver;
-static struct file_operations mdc800_device_ops;
+static const struct file_operations mdc800_device_ops;
static struct usb_class_driver mdc800_class = {
.name = "mdc800%d",
.fops = &mdc800_device_ops,
@@ -941,7 +941,7 @@
****************************************************************************/
/* File Operations of this drivers */
-static struct file_operations mdc800_device_ops =
+static const struct file_operations mdc800_device_ops =
{
.owner = THIS_MODULE,
.read = mdc800_device_read,
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 650103b..a102a58 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -205,10 +205,12 @@
depends on USB && INPUT
---help---
USB Touchscreen driver for:
- - eGalax Touchkit USB
+ - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
- PanJit TouchSet USB
- - 3M MicroTouch USB
+ - 3M MicroTouch USB (EX II series)
- ITM
+ - some other eTurboTouch
+ - Gunze AHL61
Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
@@ -218,7 +220,7 @@
config USB_TOUCHSCREEN_EGALAX
default y
- bool "eGalax device support" if EMBEDDED
+ bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
depends on USB_TOUCHSCREEN
config USB_TOUCHSCREEN_PANJIT
@@ -228,7 +230,7 @@
config USB_TOUCHSCREEN_3M
default y
- bool "3M/Microtouch device support" if EMBEDDED
+ bool "3M/Microtouch EX II series device support" if EMBEDDED
depends on USB_TOUCHSCREEN
config USB_TOUCHSCREEN_ITM
@@ -236,6 +238,16 @@
bool "ITM device support" if EMBEDDED
depends on USB_TOUCHSCREEN
+config USB_TOUCHSCREEN_ETURBO
+ default y
+ bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
+
+config USB_TOUCHSCREEN_GUNZE
+ default y
+ bool "Gunze AHL61 device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
+
config USB_YEALINK
tristate "Yealink usb-p1k voip phone"
depends on USB && INPUT && EXPERIMENTAL
@@ -326,3 +338,13 @@
To compile this driver as a module, choose M here: the
module will be called appletouch.
+
+config USB_TRANCEVIBRATOR
+ tristate "PlayStation 2 Trance Vibrator driver support"
+ depends on USB
+ help
+ Say Y here if you want to connect a PlayStation 2 Trance Vibrator
+ device to your computer's USB port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called trancevibrator.
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index 7641145..48551be 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -3,6 +3,7 @@
#
# Multipart objects.
+wacom-objs := wacom_sys.o wacom_wac.o
usbhid-objs := hid-core.o
# Optional parts of multipart objects.
@@ -44,6 +45,7 @@
obj-$(CONFIG_USB_YEALINK) += yealink.o
obj-$(CONFIG_USB_XPAD) += xpad.o
obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
+obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o
ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
index 18c10e1..d83603b 100644
--- a/drivers/usb/input/acecad.c
+++ b/drivers/usb/input/acecad.c
@@ -141,10 +141,7 @@
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
- return -ENODEV;
-
- if ((endpoint->bmAttributes & 3) != 3)
+ if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c
index 044faa0..0aa9cc2 100644
--- a/drivers/usb/input/appletouch.c
+++ b/drivers/usb/input/appletouch.c
@@ -436,10 +436,7 @@
iface_desc = iface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
endpoint = &iface_desc->endpoint[i].desc;
- if (!int_in_endpointAddr &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
+ if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
/* we found an interrupt in endpoint */
int_in_endpointAddr = endpoint->bEndpointAddress;
break;
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index 3719fcb..3558d7e 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -732,12 +732,8 @@
endpoint_in = &iface_host->endpoint[0].desc;
endpoint_out = &iface_host->endpoint[1].desc;
- if (!(endpoint_in->bEndpointAddress & USB_DIR_IN)) {
- err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__);
- return -ENODEV;
- }
- if ((endpoint_in->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) {
- err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__);
+ if (!usb_endpoint_is_int_in(endpoint_in)) {
+ err("%s: Unexpected endpoint_in\n", __FUNCTION__);
return -ENODEV;
}
if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 3305fb6..2a3e9e9b 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1023,7 +1023,8 @@
return;
case -EILSEQ: /* protocol error or unplug */
case -EPROTO: /* protocol error or unplug */
- case -ETIMEDOUT: /* NAK */
+ case -ETIME: /* protocol error or unplug */
+ case -ETIMEDOUT: /* Should never happen, but... */
clear_bit(HID_IN_RUNNING, &hid->iofl);
hid_io_error(hid);
return;
@@ -1535,13 +1536,17 @@
#define USB_VENDOR_ID_GLAB 0x06c2
#define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038
#define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039
-#define USB_DEVICE_ID_8_8_8_IF_KIT 0x0045
#define USB_DEVICE_ID_0_0_4_IF_KIT 0x0040
+#define USB_DEVICE_ID_0_16_16_IF_KIT 0x0044
+#define USB_DEVICE_ID_8_8_8_IF_KIT 0x0045
+#define USB_DEVICE_ID_0_8_7_IF_KIT 0x0051
#define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053
+#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
+#define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201
#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
#define USB_VENDOR_ID_WISEGROUP_LTD 0x6677
@@ -1591,6 +1596,10 @@
#define USB_VENDOR_ID_YEALINK 0x6993
#define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K 0xb001
+
+#define USB_VENDOR_ID_ALCOR 0x058f
+#define USB_DEVICE_ID_ALCOR_USBRS232 0x9720
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
@@ -1608,6 +1617,7 @@
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24, HID_QUIRK_IGNORE },
@@ -1620,9 +1630,12 @@
{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_8_8_8_IF_KIT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_0_4_IF_KIT, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_16_16_IF_KIT, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_8_8_8_IF_KIT, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
@@ -1690,7 +1703,11 @@
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 20, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 30, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 108, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 118, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
@@ -1701,6 +1718,7 @@
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index f6b839c..a2b419d 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -722,7 +722,7 @@
return -EINVAL;
}
-static struct file_operations hiddev_fops = {
+static const struct file_operations hiddev_fops = {
.owner = THIS_MODULE,
.read = hiddev_read,
.write = hiddev_write,
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
index 86acb5f..61966d7 100644
--- a/drivers/usb/input/itmtouch.c
+++ b/drivers/usb/input/itmtouch.c
@@ -87,7 +87,7 @@
case 0:
/* success */
break;
- case -ETIMEDOUT:
+ case -ETIME:
/* this urb is timing out */
dbg("%s - urb timed out - was the device unplugged?",
__FUNCTION__);
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index 4723b31..a903595 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -420,8 +420,7 @@
for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
endpoint = &iface->endpoint[i].desc;
- if ((endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+ if (usb_endpoint_is_int_in(endpoint)) {
/* we found our interrupt in endpoint */
return endpoint;
}
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index a9ccda8..5dce951 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -107,7 +107,7 @@
case 0:
/* success */
break;
- case -ETIMEDOUT:
+ case -ETIME:
/* this urb is timing out */
dbg("%s - urb timed out - was the device unplugged?",
__FUNCTION__);
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index b3c0d0c..f0f8db6 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -313,9 +313,7 @@
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
- return -EIO;
- if ((endpoint->bmAttributes & 3) != 3)
+ if (!usb_endpoint_is_int_in(endpoint))
return -EIO;
usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 0149043..30b9f82 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -201,7 +201,7 @@
case 0:
/* success */
break;
- case -ETIMEDOUT:
+ case -ETIME:
/* this urb is timing out */
dbg("%s - urb timed out - was the device unplugged?",
__FUNCTION__);
diff --git a/drivers/usb/input/trancevibrator.c b/drivers/usb/input/trancevibrator.c
new file mode 100644
index 0000000..33cd91d
--- /dev/null
+++ b/drivers/usb/input/trancevibrator.c
@@ -0,0 +1,159 @@
+/*
+ * PlayStation 2 Trance Vibrator driver
+ *
+ * Copyright (C) 2006 Sam Hocevar <sam@zoy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Standard include files */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v1.1"
+#define DRIVER_AUTHOR "Sam Hocevar, sam@zoy.org"
+#define DRIVER_DESC "PlayStation 2 Trance Vibrator driver"
+
+#define TRANCEVIBRATOR_VENDOR_ID 0x0b49 /* ASCII Corporation */
+#define TRANCEVIBRATOR_PRODUCT_ID 0x064f /* Trance Vibrator */
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(TRANCEVIBRATOR_VENDOR_ID, TRANCEVIBRATOR_PRODUCT_ID) },
+ { },
+};
+MODULE_DEVICE_TABLE (usb, id_table);
+
+/* Driver-local specific stuff */
+struct trancevibrator {
+ struct usb_device *udev;
+ unsigned int speed;
+};
+
+static ssize_t show_speed(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct trancevibrator *tv = usb_get_intfdata(intf);
+
+ return sprintf(buf, "%d\n", tv->speed);
+}
+
+static ssize_t set_speed(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct trancevibrator *tv = usb_get_intfdata(intf);
+ int temp, retval;
+
+ temp = simple_strtoul(buf, NULL, 10);
+ if (temp > 255)
+ temp = 255;
+ else if (temp < 0)
+ temp = 0;
+ tv->speed = temp;
+
+ dev_dbg(&tv->udev->dev, "speed = %d\n", tv->speed);
+
+ /* Set speed */
+ retval = usb_control_msg(tv->udev, usb_sndctrlpipe(tv->udev, 0),
+ 0x01, /* vendor request: set speed */
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ tv->speed, /* speed value */
+ 0, NULL, 0, USB_CTRL_GET_TIMEOUT);
+ if (retval) {
+ dev_dbg(&tv->udev->dev, "retval = %d\n", retval);
+ return retval;
+ }
+ return count;
+}
+
+static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+
+static int tv_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct trancevibrator *dev;
+ int retval;
+
+ dev = kzalloc(sizeof(struct trancevibrator), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&interface->dev, "Out of memory\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ dev->udev = usb_get_dev(udev);
+ usb_set_intfdata(interface, dev);
+ retval = device_create_file(&interface->dev, &dev_attr_speed);
+ if (retval)
+ goto error_create_file;
+
+ return 0;
+
+error_create_file:
+ usb_put_dev(udev);
+ usb_set_intfdata(interface, NULL);
+error:
+ kfree(dev);
+ return retval;
+}
+
+static void tv_disconnect(struct usb_interface *interface)
+{
+ struct trancevibrator *dev;
+
+ dev = usb_get_intfdata (interface);
+ usb_set_intfdata(interface, NULL);
+ device_remove_file(&interface->dev, &dev_attr_speed);
+ usb_put_dev(dev->udev);
+ kfree(dev);
+}
+
+/* USB subsystem object */
+static struct usb_driver tv_driver = {
+ .name = "trancevibrator",
+ .probe = tv_probe,
+ .disconnect = tv_disconnect,
+ .id_table = id_table,
+};
+
+static int __init tv_init(void)
+{
+ int retval = usb_register(&tv_driver);
+ if (retval) {
+ err("usb_register failed. Error number %d", retval);
+ return retval;
+ }
+
+ info(DRIVER_VERSION ":" DRIVER_DESC);
+ return 0;
+}
+
+static void __exit tv_exit(void)
+{
+ usb_deregister(&tv_driver);
+}
+
+module_init (tv_init);
+module_exit (tv_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index 446935b..0fb792b 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -218,7 +218,7 @@
static struct usb_device_id usb_mouse_id_table [] = {
{ USB_INTERFACE_INFO(3, 1, 2) },
- { } /* Terminating entry */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, usb_mouse_id_table);
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index a338bf4..4640d10 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -2,9 +2,12 @@
* usbtouchscreen.c
* Driver for USB Touchscreens, supporting those devices:
* - eGalax Touchkit
- * - 3M/Microtouch
+ * includes eTurboTouch CT-410/510/700
+ * - 3M/Microtouch EX II series
* - ITM
* - PanJit TouchSet
+ * - eTurboTouch
+ * - Gunze AHL61
*
* Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -42,7 +45,7 @@
#include <linux/usb/input.h>
-#define DRIVER_VERSION "v0.3"
+#define DRIVER_VERSION "v0.4"
#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
#define DRIVER_DESC "USB Touchscreen Driver"
@@ -60,6 +63,7 @@
int flags;
void (*process_pkt) (struct usbtouch_usb *usbtouch, struct pt_regs *regs, unsigned char *pkt, int len);
+ int (*get_pkt_len) (unsigned char *pkt, int len);
int (*read_data) (unsigned char *pkt, int *x, int *y, int *touch, int *press);
int (*init) (struct usbtouch_usb *usbtouch);
};
@@ -81,8 +85,16 @@
char phys[64];
};
-static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
- struct pt_regs *regs, unsigned char *pkt, int len);
+
+#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO)
+#define MULTI_PACKET
+#endif
+
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+ struct pt_regs *regs,
+ unsigned char *pkt, int len);
+#endif
/* device types */
enum {
@@ -91,14 +103,19 @@
DEVTYPE_PANJIT,
DEVTYPE_3M,
DEVTYPE_ITM,
+ DEVTYPE_ETURBO,
+ DEVTYPE_GUNZE,
};
static struct usb_device_id usbtouch_devices[] = {
#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
{USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
#endif
#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
@@ -116,6 +133,14 @@
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+ {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+ {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
+#endif
+
{}
};
@@ -140,82 +165,23 @@
*touch = pkt[0] & 0x01;
return 1;
-
}
-static int egalax_get_pkt_len(unsigned char *buf)
+static int egalax_get_pkt_len(unsigned char *buf, int len)
{
switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
case EGALAX_PKT_TYPE_REPT:
return 5;
case EGALAX_PKT_TYPE_DIAG:
+ if (len < 2)
+ return -1;
+
return buf[1] + 2;
}
return 0;
}
-
-static void egalax_process(struct usbtouch_usb *usbtouch, struct pt_regs *regs,
- unsigned char *pkt, int len)
-{
- unsigned char *buffer;
- int pkt_len, buf_len, pos;
-
- /* if the buffer contains data, append */
- if (unlikely(usbtouch->buf_len)) {
- int tmp;
-
- /* if only 1 byte in buffer, add another one to get length */
- if (usbtouch->buf_len == 1)
- usbtouch->buffer[1] = pkt[0];
-
- pkt_len = egalax_get_pkt_len(usbtouch->buffer);
-
- /* unknown packet: drop everything */
- if (!pkt_len)
- return;
-
- /* append, process */
- tmp = pkt_len - usbtouch->buf_len;
- memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
- usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len);
-
- buffer = pkt + tmp;
- buf_len = len - tmp;
- } else {
- buffer = pkt;
- buf_len = len;
- }
-
- /* only one byte left in buffer */
- if (unlikely(buf_len == 1)) {
- usbtouch->buffer[0] = buffer[0];
- usbtouch->buf_len = 1;
- return;
- }
-
- /* loop over the buffer */
- pos = 0;
- while (pos < buf_len) {
- /* get packet len */
- pkt_len = egalax_get_pkt_len(buffer + pos);
-
- /* unknown packet: drop everything */
- if (unlikely(!pkt_len))
- return;
-
- /* full packet: process */
- if (likely(pkt_len <= buf_len)) {
- usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len);
- } else {
- /* incomplete packet: save in buffer */
- memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
- usbtouch->buf_len = buf_len - pos;
- }
- pos += pkt_len;
- }
-}
#endif
@@ -254,7 +220,7 @@
static int mtouch_init(struct usbtouch_usb *usbtouch)
{
- int ret;
+ int ret, i;
ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
MTOUCHUSB_RESET,
@@ -264,15 +230,20 @@
__FUNCTION__, ret);
if (ret < 0)
return ret;
+ msleep(150);
- ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
- MTOUCHUSB_ASYNC_REPORT,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
- dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
- __FUNCTION__, ret);
- if (ret < 0)
- return ret;
+ for (i = 0; i < 3; i++) {
+ ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ MTOUCHUSB_ASYNC_REPORT,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
+ __FUNCTION__, ret);
+ if (ret >= 0)
+ break;
+ if (ret != -EPIPE)
+ return ret;
+ }
return 0;
}
@@ -296,6 +267,54 @@
/*****************************************************************************
+ * eTurboTouch part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ unsigned int shift;
+
+ /* packets should start with sync */
+ if (!(pkt[0] & 0x80))
+ return 0;
+
+ shift = (6 - (pkt[0] & 0x03));
+ *x = ((pkt[3] << 7) | pkt[4]) >> shift;
+ *y = ((pkt[1] << 7) | pkt[2]) >> shift;
+ *touch = (pkt[0] & 0x10) ? 1 : 0;
+
+ return 1;
+}
+
+static int eturbo_get_pkt_len(unsigned char *buf, int len)
+{
+ if (buf[0] & 0x80)
+ return 5;
+ if (buf[0] == 0x01)
+ return 3;
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * Gunze part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
+ return 0;
+
+ *x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+ *y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ *touch = pkt[0] & 0x20;
+
+ return 1;
+}
+#endif
+
+/*****************************************************************************
* the different device descriptors
*/
static struct usbtouch_device_info usbtouch_dev_info[] = {
@@ -307,7 +326,8 @@
.max_yc = 0x07ff,
.rept_size = 16,
.flags = USBTOUCH_FLG_BUFFER,
- .process_pkt = egalax_process,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = egalax_get_pkt_len,
.read_data = egalax_read_data,
},
#endif
@@ -346,6 +366,31 @@
.read_data = itm_read_data,
},
#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+ [DEVTYPE_ETURBO] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 8,
+ .flags = USBTOUCH_FLG_BUFFER,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = eturbo_get_pkt_len,
+ .read_data = eturbo_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+ [DEVTYPE_GUNZE] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 4,
+ .read_data = gunze_read_data,
+ },
+#endif
};
@@ -377,6 +422,83 @@
}
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+ struct pt_regs *regs,
+ unsigned char *pkt, int len)
+{
+ unsigned char *buffer;
+ int pkt_len, pos, buf_len, tmp;
+
+ /* process buffer */
+ if (unlikely(usbtouch->buf_len)) {
+ /* try to get size */
+ pkt_len = usbtouch->type->get_pkt_len(
+ usbtouch->buffer, usbtouch->buf_len);
+
+ /* drop? */
+ if (unlikely(!pkt_len))
+ goto out_flush_buf;
+
+ /* need to append -pkt_len bytes before able to get size */
+ if (unlikely(pkt_len < 0)) {
+ int append = -pkt_len;
+ if (unlikely(append > len))
+ append = len;
+ if (usbtouch->buf_len + append >= usbtouch->type->rept_size)
+ goto out_flush_buf;
+ memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);
+ usbtouch->buf_len += append;
+
+ pkt_len = usbtouch->type->get_pkt_len(
+ usbtouch->buffer, usbtouch->buf_len);
+ if (pkt_len < 0)
+ return;
+ }
+
+ /* append */
+ tmp = pkt_len - usbtouch->buf_len;
+ if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
+ goto out_flush_buf;
+ memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+ usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len);
+
+ buffer = pkt + tmp;
+ buf_len = len - tmp;
+ } else {
+ buffer = pkt;
+ buf_len = len;
+ }
+
+ /* loop over the received packet, process */
+ pos = 0;
+ while (pos < buf_len) {
+ /* get packet len */
+ pkt_len = usbtouch->type->get_pkt_len(buffer + pos, len);
+
+ /* unknown packet: drop everything */
+ if (unlikely(!pkt_len))
+ goto out_flush_buf;
+
+ /* full packet: process */
+ if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
+ usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len);
+ } else {
+ /* incomplete packet: save in buffer */
+ memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+ usbtouch->buf_len = buf_len - pos;
+ return;
+ }
+ pos += pkt_len;
+ }
+
+out_flush_buf:
+ usbtouch->buf_len = 0;
+ return;
+}
+#endif
+
+
static void usbtouch_irq(struct urb *urb, struct pt_regs *regs)
{
struct usbtouch_usb *usbtouch = urb->context;
@@ -386,7 +508,7 @@
case 0:
/* success */
break;
- case -ETIMEDOUT:
+ case -ETIME:
/* this urb is timing out */
dbg("%s - urb timed out - was the device unplugged?",
__FUNCTION__);
@@ -452,7 +574,7 @@
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
struct usbtouch_device_info *type;
- int err;
+ int err = -ENOMEM;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
@@ -526,6 +648,7 @@
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
+ usbtouch->irq->dev = usbtouch->udev;
usbtouch->irq->transfer_dma = usbtouch->data_dma;
usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -553,7 +676,7 @@
out_free:
input_free_device(input_dev);
kfree(usbtouch);
- return -ENOMEM;
+ return err;
}
static void usbtouch_disconnect(struct usb_interface *intf)
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
deleted file mode 100644
index 369461a..0000000
--- a/drivers/usb/input/wacom.c
+++ /dev/null
@@ -1,1003 +0,0 @@
-/*
- * USB Wacom Graphire and Wacom Intuos tablet support
- *
- * Copyright (c) 2000-2004 Vojtech Pavlik <vojtech@ucw.cz>
- * Copyright (c) 2000 Andreas Bach Aaen <abach@stofanet.dk>
- * Copyright (c) 2000 Clifford Wolf <clifford@clifford.at>
- * Copyright (c) 2000 Sam Mosel <sam.mosel@computer.org>
- * Copyright (c) 2000 James E. Blair <corvus@gnu.org>
- * Copyright (c) 2000 Daniel Egger <egger@suse.de>
- * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
- * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-2006 Ping Cheng <pingc@wacom.com>
- *
- * ChangeLog:
- * v0.1 (vp) - Initial release
- * v0.2 (aba) - Support for all buttons / combinations
- * v0.3 (vp) - Support for Intuos added
- * v0.4 (sm) - Support for more Intuos models, menustrip
- * relative mode, proximity.
- * v0.5 (vp) - Big cleanup, nifty features removed,
- * they belong in userspace
- * v1.8 (vp) - Submit URB only when operating, moved to CVS,
- * use input_report_key instead of report_btn and
- * other cleanups
- * v1.11 (vp) - Add URB ->dev setting for new kernels
- * v1.11 (jb) - Add support for the 4D Mouse & Lens
- * v1.12 (de) - Add support for two more inking pen IDs
- * v1.14 (vp) - Use new USB device id probing scheme.
- * Fix Wacom Graphire mouse wheel
- * v1.18 (vp) - Fix mouse wheel direction
- * Make mouse relative
- * v1.20 (fl) - Report tool id for Intuos devices
- * - Multi tools support
- * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...)
- * - Add PL models support
- * - Fix Wacom Graphire mouse wheel again
- * v1.21 (vp) - Removed protocol descriptions
- * - Added MISC_SERIAL for tool serial numbers
- * (gb) - Identify version on module load.
- * v1.21.1 (fl) - added Graphire2 support
- * v1.21.2 (fl) - added Intuos2 support
- * - added all the PL ids
- * v1.21.3 (fl) - added another eraser id from Neil Okamoto
- * - added smooth filter for Graphire from Peri Hankey
- * - added PenPartner support from Olaf van Es
- * - new tool ids from Ole Martin Bjoerndalen
- * v1.29 (pc) - Add support for more tablets
- * - Fix pressure reporting
- * v1.30 (vp) - Merge 2.4 and 2.5 drivers
- * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
- * - Cleanups here and there
- * v1.30.1 (pi) - Added Graphire3 support
- * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
- * v1.43 (pc) - Added support for Cintiq 21UX
- * - Fixed a Graphire bug
- * - Merged wacom_intuos3_irq into wacom_intuos_irq
- * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
- * - Report Device IDs
- * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
- * - Minor data report fix
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <asm/unaligned.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.45"
-#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
-#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-#define USB_VENDOR_ID_WACOM 0x056a
-#define STYLUS_DEVICE_ID 0x02
-#define CURSOR_DEVICE_ID 0x06
-#define ERASER_DEVICE_ID 0x0A
-
-enum {
- PENPARTNER = 0,
- GRAPHIRE,
- WACOM_G4,
- PL,
- INTUOS,
- INTUOS3,
- INTUOS312,
- INTUOS319,
- CINTIQ,
- MAX_TYPE
-};
-
-struct wacom_features {
- char *name;
- int pktlen;
- int x_max;
- int y_max;
- int pressure_max;
- int distance_max;
- int type;
- usb_complete_t irq;
-};
-
-struct wacom {
- signed char *data;
- dma_addr_t data_dma;
- struct input_dev *dev;
- struct usb_device *usbdev;
- struct urb *irq;
- struct wacom_features *features;
- int tool[2];
- int id[2];
- __u32 serial[2];
- char phys[32];
-};
-
-#define USB_REQ_GET_REPORT 0x01
-#define USB_REQ_SET_REPORT 0x09
-
-static int usb_get_report(struct usb_interface *intf, unsigned char type,
- unsigned char id, void *buf, int size)
-{
- return usb_control_msg(interface_to_usbdev(intf),
- usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
- USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
- buf, size, 100);
-}
-
-static int usb_set_report(struct usb_interface *intf, unsigned char type,
- unsigned char id, void *buf, int size)
-{
- return usb_control_msg(interface_to_usbdev(intf),
- usb_sndctrlpipe(interface_to_usbdev(intf), 0),
- USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
- buf, size, 1000);
-}
-
-static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
-{
- struct wacom *wacom = urb->context;
- unsigned char *data = wacom->data;
- struct input_dev *dev = wacom->dev;
- int prox, pressure, id;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- if (data[0] != 2) {
- dbg("wacom_pl_irq: received unknown report #%d", data[0]);
- goto exit;
- }
-
- prox = data[1] & 0x40;
-
- input_regs(dev, regs);
-
- id = ERASER_DEVICE_ID;
- if (prox) {
-
- pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
- if (wacom->features->pressure_max > 255)
- pressure = (pressure << 1) | ((data[4] >> 6) & 1);
- pressure += (wacom->features->pressure_max + 1) / 2;
-
- /*
- * if going from out of proximity into proximity select between the eraser
- * and the pen based on the state of the stylus2 button, choose eraser if
- * pressed else choose pen. if not a proximity change from out to in, send
- * an out of proximity for previous tool then a in for new tool.
- */
- if (!wacom->tool[0]) {
- /* Eraser bit set for DTF */
- if (data[1] & 0x10)
- wacom->tool[1] = BTN_TOOL_RUBBER;
- else
- /* Going into proximity select tool */
- wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
- } else {
- /* was entered with stylus2 pressed */
- if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
- /* report out proximity for previous tool */
- input_report_key(dev, wacom->tool[1], 0);
- input_sync(dev);
- wacom->tool[1] = BTN_TOOL_PEN;
- goto exit;
- }
- }
- if (wacom->tool[1] != BTN_TOOL_RUBBER) {
- /* Unknown tool selected default to pen tool */
- wacom->tool[1] = BTN_TOOL_PEN;
- id = STYLUS_DEVICE_ID;
- }
- input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
- input_report_abs(dev, ABS_MISC, id); /* report tool id */
- input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
- input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
- input_report_abs(dev, ABS_PRESSURE, pressure);
-
- input_report_key(dev, BTN_TOUCH, data[4] & 0x08);
- input_report_key(dev, BTN_STYLUS, data[4] & 0x10);
- /* Only allow the stylus2 button to be reported for the pen tool. */
- input_report_key(dev, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
- } else {
- /* report proximity-out of a (valid) tool */
- if (wacom->tool[1] != BTN_TOOL_RUBBER) {
- /* Unknown tool selected default to pen tool */
- wacom->tool[1] = BTN_TOOL_PEN;
- }
- input_report_key(dev, wacom->tool[1], prox);
- }
-
- wacom->tool[0] = prox; /* Save proximity state */
- input_sync(dev);
-
- exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
-}
-
-static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
-{
- struct wacom *wacom = urb->context;
- unsigned char *data = wacom->data;
- struct input_dev *dev = wacom->dev;
- int retval, id;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- if (data[0] != 2) {
- printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
- goto exit;
- }
-
- input_regs(dev, regs);
- if (data[1] & 0x04) {
- input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
- input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
- id = ERASER_DEVICE_ID;
- } else {
- input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
- input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
- id = STYLUS_DEVICE_ID;
- }
- input_report_abs(dev, ABS_MISC, id); /* report tool id */
- input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2]));
- input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[4]));
- input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
- input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
- input_report_key(dev, BTN_STYLUS2, data[1] & 0x10);
-
- input_sync(dev);
-
- exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
-}
-
-static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs)
-{
- struct wacom *wacom = urb->context;
- unsigned char *data = wacom->data;
- struct input_dev *dev = wacom->dev;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- if (data[0] != 2) {
- printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
- goto exit;
- }
-
- input_regs(dev, regs);
- input_report_key(dev, BTN_TOOL_PEN, 1);
- input_report_abs(dev, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
- input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1]));
- input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3]));
- input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127);
- input_report_key(dev, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
- input_report_key(dev, BTN_STYLUS, (data[5] & 0x40));
- input_sync(dev);
-
- exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
-}
-
-static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
-{
- struct wacom *wacom = urb->context;
- unsigned char *data = wacom->data;
- struct input_dev *dev = wacom->dev;
- int x, y, id, rw;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- if (data[0] == 99) return; /* for Volito tablets */
-
- if (data[0] != 2) {
- dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
- goto exit;
- }
-
- input_regs(dev, regs);
-
- id = STYLUS_DEVICE_ID;
- if (data[1] & 0x10) { /* in prox */
-
- switch ((data[1] >> 5) & 3) {
-
- case 0: /* Pen */
- wacom->tool[0] = BTN_TOOL_PEN;
- break;
-
- case 1: /* Rubber */
- wacom->tool[0] = BTN_TOOL_RUBBER;
- id = ERASER_DEVICE_ID;
- break;
-
- case 2: /* Mouse with wheel */
- input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
- if (wacom->features->type == WACOM_G4) {
- rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
- input_report_rel(dev, REL_WHEEL, -rw);
- } else
- input_report_rel(dev, REL_WHEEL, -(signed char) data[6]);
- /* fall through */
-
- case 3: /* Mouse without wheel */
- wacom->tool[0] = BTN_TOOL_MOUSE;
- id = CURSOR_DEVICE_ID;
- input_report_key(dev, BTN_LEFT, data[1] & 0x01);
- input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
- if (wacom->features->type == WACOM_G4)
- input_report_abs(dev, ABS_DISTANCE, data[6]);
- else
- input_report_abs(dev, ABS_DISTANCE, data[7]);
- break;
- }
- }
-
- if (data[1] & 0x90) {
- x = le16_to_cpu(*(__le16 *) &data[2]);
- y = le16_to_cpu(*(__le16 *) &data[4]);
- input_report_abs(dev, ABS_X, x);
- input_report_abs(dev, ABS_Y, y);
- if (wacom->tool[0] != BTN_TOOL_MOUSE) {
- input_report_abs(dev, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
- input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
- input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
- input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
- }
- }
-
- if (data[1] & 0x10)
- input_report_abs(dev, ABS_MISC, id); /* report tool id */
- else
- input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
- input_report_key(dev, wacom->tool[0], data[1] & 0x10);
- input_sync(dev);
-
- /* send pad data */
- if (wacom->features->type == WACOM_G4) {
- if ((wacom->serial[1] & 0xc0) != (data[7] & 0xf8)) {
- wacom->id[1] = 1;
- wacom->serial[1] = (data[7] & 0xf8);
- input_report_key(dev, BTN_0, (data[7] & 0x40));
- input_report_key(dev, BTN_4, (data[7] & 0x80));
- rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
- input_report_rel(dev, REL_WHEEL, rw);
- input_report_key(dev, BTN_TOOL_FINGER, 0xf0);
- input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
- } else if (wacom->id[1]) {
- wacom->id[1] = 0;
- input_report_key(dev, BTN_TOOL_FINGER, 0);
- input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
- }
- input_sync(dev);
- }
- exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
-}
-
-static int wacom_intuos_inout(struct urb *urb)
-{
- struct wacom *wacom = urb->context;
- unsigned char *data = wacom->data;
- struct input_dev *dev = wacom->dev;
- int idx;
-
- /* tool number */
- idx = data[1] & 0x01;
-
- /* Enter report */
- if ((data[1] & 0xfc) == 0xc0) {
- /* serial number of the tool */
- wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
- (data[4] << 20) + (data[5] << 12) +
- (data[6] << 4) + (data[7] >> 4);
-
- wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
- switch (wacom->id[idx]) {
- case 0x812: /* Inking pen */
- case 0x801: /* Intuos3 Inking pen */
- case 0x012:
- wacom->tool[idx] = BTN_TOOL_PENCIL;
- break;
- case 0x822: /* Pen */
- case 0x842:
- case 0x852:
- case 0x823: /* Intuos3 Grip Pen */
- case 0x813: /* Intuos3 Classic Pen */
- case 0x885: /* Intuos3 Marker Pen */
- case 0x022:
- wacom->tool[idx] = BTN_TOOL_PEN;
- break;
- case 0x832: /* Stroke pen */
- case 0x032:
- wacom->tool[idx] = BTN_TOOL_BRUSH;
- break;
- case 0x007: /* Mouse 4D and 2D */
- case 0x09c:
- case 0x094:
- case 0x017: /* Intuos3 2D Mouse */
- wacom->tool[idx] = BTN_TOOL_MOUSE;
- break;
- case 0x096: /* Lens cursor */
- case 0x097: /* Intuos3 Lens cursor */
- wacom->tool[idx] = BTN_TOOL_LENS;
- break;
- case 0x82a: /* Eraser */
- case 0x85a:
- case 0x91a:
- case 0xd1a:
- case 0x0fa:
- case 0x82b: /* Intuos3 Grip Pen Eraser */
- case 0x81b: /* Intuos3 Classic Pen Eraser */
- case 0x91b: /* Intuos3 Airbrush Eraser */
- wacom->tool[idx] = BTN_TOOL_RUBBER;
- break;
- case 0xd12:
- case 0x912:
- case 0x112:
- case 0x913: /* Intuos3 Airbrush */
- wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
- break;
- default: /* Unknown tool */
- wacom->tool[idx] = BTN_TOOL_PEN;
- }
- if(!((wacom->tool[idx] == BTN_TOOL_LENS) &&
- ((wacom->features->type == INTUOS312)
- || (wacom->features->type == INTUOS319)))) {
- input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
- input_report_key(dev, wacom->tool[idx], 1);
- input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
- input_sync(dev);
- }
- return 1;
- }
-
- /* Exit report */
- if ((data[1] & 0xfe) == 0x80) {
- input_report_key(dev, wacom->tool[idx], 0);
- input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
- input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
- input_sync(dev);
- return 1;
- }
-
- if((wacom->tool[idx] == BTN_TOOL_LENS) && ((wacom->features->type == INTUOS312)
- || (wacom->features->type == INTUOS319)))
- return 1;
- else
- return 0;
-}
-
-static void wacom_intuos_general(struct urb *urb)
-{
- struct wacom *wacom = urb->context;
- unsigned char *data = wacom->data;
- struct input_dev *dev = wacom->dev;
- unsigned int t;
-
- /* general pen packet */
- if ((data[1] & 0xb8) == 0xa0) {
- t = (data[6] << 2) | ((data[7] >> 6) & 3);
- input_report_abs(dev, ABS_PRESSURE, t);
- input_report_abs(dev, ABS_TILT_X,
- ((data[7] << 1) & 0x7e) | (data[8] >> 7));
- input_report_abs(dev, ABS_TILT_Y, data[8] & 0x7f);
- input_report_key(dev, BTN_STYLUS, data[1] & 2);
- input_report_key(dev, BTN_STYLUS2, data[1] & 4);
- input_report_key(dev, BTN_TOUCH, t > 10);
- }
-
- /* airbrush second packet */
- if ((data[1] & 0xbc) == 0xb4) {
- input_report_abs(dev, ABS_WHEEL,
- (data[6] << 2) | ((data[7] >> 6) & 3));
- input_report_abs(dev, ABS_TILT_X,
- ((data[7] << 1) & 0x7e) | (data[8] >> 7));
- input_report_abs(dev, ABS_TILT_Y, data[8] & 0x7f);
- }
- return;
-}
-
-static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
-{
- struct wacom *wacom = urb->context;
- unsigned char *data = wacom->data;
- struct input_dev *dev = wacom->dev;
- unsigned int t;
- int idx;
- int retval;
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
- dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
- goto exit;
- }
-
- input_regs(dev, regs);
-
- /* tool number */
- idx = data[1] & 0x01;
-
- /* pad packets. Works as a second tool and is always in prox */
- if (data[0] == 12) {
- /* initiate the pad as a device */
- if (wacom->tool[1] != BTN_TOOL_FINGER)
- wacom->tool[1] = BTN_TOOL_FINGER;
-
- input_report_key(dev, BTN_0, (data[5] & 0x01));
- input_report_key(dev, BTN_1, (data[5] & 0x02));
- input_report_key(dev, BTN_2, (data[5] & 0x04));
- input_report_key(dev, BTN_3, (data[5] & 0x08));
- input_report_key(dev, BTN_4, (data[6] & 0x01));
- input_report_key(dev, BTN_5, (data[6] & 0x02));
- input_report_key(dev, BTN_6, (data[6] & 0x04));
- input_report_key(dev, BTN_7, (data[6] & 0x08));
- input_report_abs(dev, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
- input_report_abs(dev, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
-
- if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2])
- input_report_key(dev, wacom->tool[1], 1);
- else
- input_report_key(dev, wacom->tool[1], 0);
- input_event(dev, EV_MSC, MSC_SERIAL, 0xffffffff);
- input_sync(dev);
- goto exit;
- }
-
- /* process in/out prox events */
- if (wacom_intuos_inout(urb))
- goto exit;
-
- /* Cintiq doesn't send data when RDY bit isn't set */
- if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
- goto exit;
-
- if (wacom->features->type >= INTUOS3) {
- input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
- input_report_abs(dev, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
- input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
- } else {
- input_report_abs(dev, ABS_X, be16_to_cpu(*(__be16 *) &data[2]));
- input_report_abs(dev, ABS_Y, be16_to_cpu(*(__be16 *) &data[4]));
- input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
- }
-
- /* process general packets */
- wacom_intuos_general(urb);
-
- /* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
- if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
-
- if (data[1] & 0x02) {
- /* Rotation packet */
- if (wacom->features->type >= INTUOS3) {
- /* I3 marker pen rotation reported as wheel
- * due to valuator limitation
- */
- t = (data[6] << 3) | ((data[7] >> 5) & 7);
- t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
- ((t-1) / 2 + 450)) : (450 - t / 2) ;
- input_report_abs(dev, ABS_WHEEL, t);
- } else {
- /* 4D mouse rotation packet */
- t = (data[6] << 3) | ((data[7] >> 5) & 7);
- input_report_abs(dev, ABS_RZ, (data[7] & 0x20) ?
- ((t - 1) / 2) : -t / 2);
- }
-
- } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3) {
- /* 4D mouse packet */
- input_report_key(dev, BTN_LEFT, data[8] & 0x01);
- input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
- input_report_key(dev, BTN_RIGHT, data[8] & 0x04);
-
- input_report_key(dev, BTN_SIDE, data[8] & 0x20);
- input_report_key(dev, BTN_EXTRA, data[8] & 0x10);
- t = (data[6] << 2) | ((data[7] >> 6) & 3);
- input_report_abs(dev, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
-
- } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
- /* 2D mouse packet */
- input_report_key(dev, BTN_LEFT, data[8] & 0x04);
- input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
- input_report_key(dev, BTN_RIGHT, data[8] & 0x10);
- input_report_rel(dev, REL_WHEEL, (data[8] & 0x01)
- - ((data[8] & 0x02) >> 1));
-
- /* I3 2D mouse side buttons */
- if (wacom->features->type == INTUOS3) {
- input_report_key(dev, BTN_SIDE, data[8] & 0x40);
- input_report_key(dev, BTN_EXTRA, data[8] & 0x20);
- }
-
- } else if (wacom->features->type < INTUOS3) {
- /* Lens cursor packets */
- input_report_key(dev, BTN_LEFT, data[8] & 0x01);
- input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
- input_report_key(dev, BTN_RIGHT, data[8] & 0x04);
- input_report_key(dev, BTN_SIDE, data[8] & 0x10);
- input_report_key(dev, BTN_EXTRA, data[8] & 0x08);
- }
- }
-
- input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
- input_report_key(dev, wacom->tool[idx], 1);
- input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
- input_sync(dev);
-
-exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
- if (retval)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
-}
-
-static struct wacom_features wacom_features[] = {
- { "Wacom Penpartner", 7, 5040, 3780, 255, 32, PENPARTNER, wacom_penpartner_irq },
- { "Wacom Graphire", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, WACOM_G4, wacom_graphire_irq },
- { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, WACOM_G4, wacom_graphire_irq },
- { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom PL400", 8, 5408, 4056, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL500", 8, 6144, 4608, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL600", 8, 6126, 4604, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq },
- { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq },
- { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq },
- { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq },
- { "Wacom DTU710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq },
- { "Wacom DTF521", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq },
- { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq },
- { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq },
- { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq },
- { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq },
- { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq },
- { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS312, wacom_intuos_irq },
- { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS319, wacom_intuos_irq },
- { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq },
- { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq },
- { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
- { }
-};
-
-static struct usb_device_id wacom_ids[] = {
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC3) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, wacom_ids);
-
-static int wacom_open(struct input_dev *dev)
-{
- struct wacom *wacom = dev->private;
-
- wacom->irq->dev = wacom->usbdev;
- if (usb_submit_urb(wacom->irq, GFP_KERNEL))
- return -EIO;
-
- return 0;
-}
-
-static void wacom_close(struct input_dev *dev)
-{
- struct wacom *wacom = dev->private;
-
- usb_kill_urb(wacom->irq);
-}
-
-static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- struct usb_endpoint_descriptor *endpoint;
- struct wacom *wacom;
- struct input_dev *input_dev;
- char rep_data[2], limit = 0;
-
- wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!wacom || !input_dev)
- goto fail1;
-
- wacom->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
- if (!wacom->data)
- goto fail1;
-
- wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!wacom->irq)
- goto fail2;
-
- wacom->usbdev = dev;
- wacom->dev = input_dev;
- usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
- strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
-
- wacom->features = wacom_features + (id - wacom_ids);
- if (wacom->features->pktlen > 10)
- BUG();
-
- input_dev->name = wacom->features->name;
- usb_to_input_id(dev, &input_dev->id);
-
- input_dev->cdev.dev = &intf->dev;
- input_dev->private = wacom;
- input_dev->open = wacom_open;
- input_dev->close = wacom_close;
-
- input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
- input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom->features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
- input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
-
- switch (wacom->features->type) {
- case WACOM_G4:
- input_dev->evbit[0] |= BIT(EV_MSC);
- input_dev->mscbit[0] |= BIT(MSC_SERIAL);
- input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
- input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
- /* fall through */
-
- case GRAPHIRE:
- input_dev->evbit[0] |= BIT(EV_REL);
- input_dev->relbit[0] |= BIT(REL_WHEEL);
- input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
- input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0);
- break;
-
- case INTUOS3:
- case INTUOS312:
- case INTUOS319:
- case CINTIQ:
- input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
- input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
- input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
- input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
- /* fall through */
-
- case INTUOS:
- input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
- input_dev->mscbit[0] |= BIT(MSC_SERIAL);
- input_dev->relbit[0] |= BIT(REL_WHEEL);
- input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
- input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
- | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
- input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0);
- input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
- input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
- input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
- input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
- input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
- break;
-
- case PL:
- input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
- break;
- }
-
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
- if (wacom->features->pktlen > 10)
- BUG();
-
- usb_fill_int_urb(wacom->irq, dev,
- usb_rcvintpipe(dev, endpoint->bEndpointAddress),
- wacom->data, wacom->features->pktlen,
- wacom->features->irq, wacom, endpoint->bInterval);
- wacom->irq->transfer_dma = wacom->data_dma;
- wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- input_register_device(wacom->dev);
-
- /* Ask the tablet to report tablet data. Repeat until it succeeds */
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- usb_set_report(intf, 3, 2, rep_data, 2);
- usb_get_report(intf, 3, 2, rep_data, 2);
- } while (rep_data[1] != 2 && limit++ < 5);
-
- usb_set_intfdata(intf, wacom);
- return 0;
-
-fail2: usb_buffer_free(dev, 10, wacom->data, wacom->data_dma);
-fail1: input_free_device(input_dev);
- kfree(wacom);
- return -ENOMEM;
-}
-
-static void wacom_disconnect(struct usb_interface *intf)
-{
- struct wacom *wacom = usb_get_intfdata (intf);
-
- usb_set_intfdata(intf, NULL);
- if (wacom) {
- usb_kill_urb(wacom->irq);
- input_unregister_device(wacom->dev);
- usb_free_urb(wacom->irq);
- usb_buffer_free(interface_to_usbdev(intf), 10, wacom->data, wacom->data_dma);
- kfree(wacom);
- }
-}
-
-static struct usb_driver wacom_driver = {
- .name = "wacom",
- .probe = wacom_probe,
- .disconnect = wacom_disconnect,
- .id_table = wacom_ids,
-};
-
-static int __init wacom_init(void)
-{
- int result = usb_register(&wacom_driver);
- if (result == 0)
- info(DRIVER_VERSION ":" DRIVER_DESC);
- return result;
-}
-
-static void __exit wacom_exit(void)
-{
- usb_deregister(&wacom_driver);
-}
-
-module_init(wacom_init);
-module_exit(wacom_exit);
diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h
new file mode 100644
index 0000000..832737b
--- /dev/null
+++ b/drivers/usb/input/wacom.h
@@ -0,0 +1,132 @@
+/*
+ * drivers/usb/input/wacom.h
+ *
+ * USB Wacom Graphire and Wacom Intuos tablet support
+ *
+ * Copyright (c) 2000-2004 Vojtech Pavlik <vojtech@ucw.cz>
+ * Copyright (c) 2000 Andreas Bach Aaen <abach@stofanet.dk>
+ * Copyright (c) 2000 Clifford Wolf <clifford@clifford.at>
+ * Copyright (c) 2000 Sam Mosel <sam.mosel@computer.org>
+ * Copyright (c) 2000 James E. Blair <corvus@gnu.org>
+ * Copyright (c) 2000 Daniel Egger <egger@suse.de>
+ * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
+ * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
+ * Copyright (c) 2002-2006 Ping Cheng <pingc@wacom.com>
+ *
+ * ChangeLog:
+ * v0.1 (vp) - Initial release
+ * v0.2 (aba) - Support for all buttons / combinations
+ * v0.3 (vp) - Support for Intuos added
+ * v0.4 (sm) - Support for more Intuos models, menustrip
+ * relative mode, proximity.
+ * v0.5 (vp) - Big cleanup, nifty features removed,
+ * they belong in userspace
+ * v1.8 (vp) - Submit URB only when operating, moved to CVS,
+ * use input_report_key instead of report_btn and
+ * other cleanups
+ * v1.11 (vp) - Add URB ->dev setting for new kernels
+ * v1.11 (jb) - Add support for the 4D Mouse & Lens
+ * v1.12 (de) - Add support for two more inking pen IDs
+ * v1.14 (vp) - Use new USB device id probing scheme.
+ * Fix Wacom Graphire mouse wheel
+ * v1.18 (vp) - Fix mouse wheel direction
+ * Make mouse relative
+ * v1.20 (fl) - Report tool id for Intuos devices
+ * - Multi tools support
+ * - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...)
+ * - Add PL models support
+ * - Fix Wacom Graphire mouse wheel again
+ * v1.21 (vp) - Removed protocol descriptions
+ * - Added MISC_SERIAL for tool serial numbers
+ * (gb) - Identify version on module load.
+ * v1.21.1 (fl) - added Graphire2 support
+ * v1.21.2 (fl) - added Intuos2 support
+ * - added all the PL ids
+ * v1.21.3 (fl) - added another eraser id from Neil Okamoto
+ * - added smooth filter for Graphire from Peri Hankey
+ * - added PenPartner support from Olaf van Es
+ * - new tool ids from Ole Martin Bjoerndalen
+ * v1.29 (pc) - Add support for more tablets
+ * - Fix pressure reporting
+ * v1.30 (vp) - Merge 2.4 and 2.5 drivers
+ * - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
+ * - Cleanups here and there
+ * v1.30.1 (pi) - Added Graphire3 support
+ * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
+ * v1.43 (pc) - Added support for Cintiq 21UX
+ * - Fixed a Graphire bug
+ * - Merged wacom_intuos3_irq into wacom_intuos_irq
+ * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
+ * - Report Device IDs
+ * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
+ * - Minor data report fix
+ * v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c,
+ * - where wacom_sys.c deals with system specific code,
+ * - and wacom_wac.c deals with Wacom specific code
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef WACOM_H
+#define WACOM_H
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.46"
+#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
+#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_WACOM 0x056a
+
+struct wacom {
+ dma_addr_t data_dma;
+ struct input_dev *dev;
+ struct usb_device *usbdev;
+ struct urb *irq;
+ struct wacom_wac * wacom_wac;
+ char phys[32];
+};
+
+struct wacom_combo {
+ struct wacom * wacom;
+ struct urb * urb;
+ struct pt_regs *regs;
+};
+
+extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
+extern void wacom_sys_irq(struct urb *urb, struct pt_regs *regs);
+extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
+extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
+extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
+extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value);
+extern void wacom_input_regs(void *wcombo);
+extern void wacom_input_sync(void *wcombo);
+extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern __u16 wacom_le16_to_cpu(unsigned char *data);
+extern __u16 wacom_be16_to_cpu(unsigned char *data);
+extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id * get_device_table(void);
+
+#endif
diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c
new file mode 100644
index 0000000..7c3b52b
--- /dev/null
+++ b/drivers/usb/input/wacom_sys.c
@@ -0,0 +1,315 @@
+/*
+ * drivers/usb/input/wacom_sys.c
+ *
+ * USB Wacom Graphire and Wacom Intuos tablet support - system specific code
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "wacom.h"
+#include "wacom_wac.h"
+
+#define USB_REQ_GET_REPORT 0x01
+#define USB_REQ_SET_REPORT 0x09
+
+static int usb_get_report(struct usb_interface *intf, unsigned char type,
+ unsigned char id, void *buf, int size)
+{
+ return usb_control_msg(interface_to_usbdev(intf),
+ usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+ USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+ buf, size, 100);
+}
+
+static int usb_set_report(struct usb_interface *intf, unsigned char type,
+ unsigned char id, void *buf, int size)
+{
+ return usb_control_msg(interface_to_usbdev(intf),
+ usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+ USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+ buf, size, 1000);
+}
+
+static struct input_dev * get_input_dev(struct wacom_combo *wcombo)
+{
+ return wcombo->wacom->dev;
+}
+
+void wacom_sys_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct wacom *wacom = urb->context;
+ struct wacom_combo wcombo;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ wcombo.wacom = wacom;
+ wcombo.urb = urb;
+ wcombo.regs = regs;
+
+ if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo))
+ input_sync(get_input_dev(&wcombo));
+
+ exit:
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
+ err ("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+}
+
+void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
+{
+ input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
+ return;
+}
+
+void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
+{
+ input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
+ return;
+}
+
+void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
+{
+ input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
+ return;
+}
+
+void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
+{
+ input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
+ return;
+}
+
+__u16 wacom_be16_to_cpu(unsigned char *data)
+{
+ __u16 value;
+ value = be16_to_cpu(*(__be16 *) data);
+ return value;
+}
+
+__u16 wacom_le16_to_cpu(unsigned char *data)
+{
+ __u16 value;
+ value = be16_to_cpu(*(__be16 *) data);
+ return value;
+}
+
+void wacom_input_regs(void *wcombo)
+{
+ input_regs(get_input_dev((struct wacom_combo *)wcombo), ((struct wacom_combo *)wcombo)->regs);
+ return;
+}
+
+void wacom_input_sync(void *wcombo)
+{
+ input_sync(get_input_dev((struct wacom_combo *)wcombo));
+ return;
+}
+
+static int wacom_open(struct input_dev *dev)
+{
+ struct wacom *wacom = dev->private;
+
+ wacom->irq->dev = wacom->usbdev;
+ if (usb_submit_urb(wacom->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void wacom_close(struct input_dev *dev)
+{
+ struct wacom *wacom = dev->private;
+
+ usb_kill_urb(wacom->irq);
+}
+
+void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ input_dev->evbit[0] |= BIT(EV_MSC);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+}
+
+void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ input_dev->evbit[0] |= BIT(EV_REL);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+}
+
+void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+ input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
+}
+
+void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
+ | BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+ input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
+ input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
+}
+
+void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
+}
+
+void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER);
+}
+
+static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct wacom *wacom;
+ struct wacom_wac *wacom_wac;
+ struct input_dev *input_dev;
+ char rep_data[2], limit = 0;
+
+ wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+ wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!wacom || !input_dev || !wacom_wac)
+ goto fail1;
+
+ wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
+ if (!wacom_wac->data)
+ goto fail1;
+
+ wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!wacom->irq)
+ goto fail2;
+
+ wacom->usbdev = dev;
+ wacom->dev = input_dev;
+ usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
+ strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
+
+ wacom_wac->features = get_wacom_feature(id);
+ if (wacom_wac->features->pktlen > 10)
+ BUG();
+
+ input_dev->name = wacom_wac->features->name;
+ wacom->wacom_wac = wacom_wac;
+ usb_to_input_id(dev, &input_dev->id);
+
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = wacom;
+ input_dev->open = wacom_open;
+ input_dev->close = wacom_close;
+
+ input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
+ input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+ input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
+
+ wacom_init_input_dev(input_dev, wacom_wac);
+
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ usb_fill_int_urb(wacom->irq, dev,
+ usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+ wacom_wac->data, wacom_wac->features->pktlen,
+ wacom_wac->features->irq, wacom, endpoint->bInterval);
+ wacom->irq->transfer_dma = wacom->data_dma;
+ wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ input_register_device(wacom->dev);
+
+ /* Ask the tablet to report tablet data. Repeat until it succeeds */
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ usb_set_report(intf, 3, 2, rep_data, 2);
+ usb_get_report(intf, 3, 2, rep_data, 2);
+ } while (rep_data[1] != 2 && limit++ < 5);
+
+ usb_set_intfdata(intf, wacom);
+ return 0;
+
+fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
+fail1: input_free_device(input_dev);
+ kfree(wacom);
+ kfree(wacom_wac);
+ return -ENOMEM;
+}
+
+static void wacom_disconnect(struct usb_interface *intf)
+{
+ struct wacom *wacom = usb_get_intfdata (intf);
+
+ usb_set_intfdata(intf, NULL);
+ if (wacom) {
+ usb_kill_urb(wacom->irq);
+ input_unregister_device(wacom->dev);
+ usb_free_urb(wacom->irq);
+ usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+ kfree(wacom);
+ kfree(wacom->wacom_wac);
+ }
+}
+
+static struct usb_driver wacom_driver = {
+ .name = "wacom",
+ .probe = wacom_probe,
+ .disconnect = wacom_disconnect,
+};
+
+static int __init wacom_init(void)
+{
+ int result;
+ wacom_driver.id_table = get_device_table();
+ result = usb_register(&wacom_driver);
+ if (result == 0)
+ info(DRIVER_VERSION ":" DRIVER_DESC);
+ return result;
+}
+
+static void __exit wacom_exit(void)
+{
+ usb_deregister(&wacom_driver);
+}
+
+module_init(wacom_init);
+module_exit(wacom_exit);
diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c
new file mode 100644
index 0000000..85d458c
--- /dev/null
+++ b/drivers/usb/input/wacom_wac.c
@@ -0,0 +1,646 @@
+/*
+ * drivers/usb/input/wacom_wac.c
+ *
+ * USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include "wacom.h"
+#include "wacom_wac.h"
+
+static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ unsigned char *data = wacom->data;
+
+ switch (data[0]) {
+ case 1:
+ wacom_input_regs(wcombo);
+ if (data[5] & 0x80) {
+ wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
+ wacom_report_key(wcombo, wacom->tool[0], 1);
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
+ wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127));
+ wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
+ } else {
+ wacom_report_key(wcombo, wacom->tool[0], 0);
+ wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */
+ wacom_report_abs(wcombo, ABS_PRESSURE, -1);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ }
+ break;
+ case 2:
+ wacom_input_regs(wcombo);
+ wacom_report_key(wcombo, BTN_TOOL_PEN, 1);
+ wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
+ wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
+ wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
+ break;
+ default:
+ printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
+ return 0;
+ }
+ return 1;
+}
+
+static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ unsigned char *data = wacom->data;
+ int prox, id, pressure;
+
+ if (data[0] != 2) {
+ dbg("wacom_pl_irq: received unknown report #%d", data[0]);
+ return 0;
+ }
+
+ prox = data[1] & 0x40;
+
+ wacom_input_regs(wcombo);
+
+ id = ERASER_DEVICE_ID;
+ if (prox) {
+
+ pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
+ if (wacom->features->pressure_max > 255)
+ pressure = (pressure << 1) | ((data[4] >> 6) & 1);
+ pressure += (wacom->features->pressure_max + 1) / 2;
+
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (!wacom->tool[0]) {
+ /* Eraser bit set for DTF */
+ if (data[1] & 0x10)
+ wacom->tool[1] = BTN_TOOL_RUBBER;
+ else
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ } else {
+ /* was entered with stylus2 pressed */
+ if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
+ /* report out proximity for previous tool */
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_sync(wcombo);
+ wacom->tool[1] = BTN_TOOL_PEN;
+ return 0;
+ }
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ id = STYLUS_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */
+ wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+ wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
+ wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+
+ wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08);
+ wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10);
+ /* Only allow the stylus2 button to be reported for the pen tool. */
+ wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
+ } else {
+ /* report proximity-out of a (valid) tool */
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox);
+ }
+
+ wacom->tool[0] = prox; /* Save proximity state */
+ return 1;
+}
+
+static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ unsigned char *data = wacom->data;
+ int id;
+
+ if (data[0] != 2) {
+ printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
+ return 0;
+ }
+
+ wacom_input_regs(wcombo);
+ if (data[1] & 0x04) {
+ wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20);
+ wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08);
+ id = ERASER_DEVICE_ID;
+ } else {
+ wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20);
+ wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
+ id = STYLUS_DEVICE_ID;
+ }
+ wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ return 1;
+}
+
+static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ unsigned char *data = wacom->data;
+ int x, y, id, rw;
+
+ if (data[0] != 2) {
+ dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
+ return 0;
+ }
+
+ wacom_input_regs(wcombo);
+
+ id = STYLUS_DEVICE_ID;
+ if (data[1] & 0x10) { /* in prox */
+
+ switch ((data[1] >> 5) & 3) {
+
+ case 0: /* Pen */
+ wacom->tool[0] = BTN_TOOL_PEN;
+ break;
+
+ case 1: /* Rubber */
+ wacom->tool[0] = BTN_TOOL_RUBBER;
+ id = ERASER_DEVICE_ID;
+ break;
+
+ case 2: /* Mouse with wheel */
+ wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
+ if (wacom->features->type == WACOM_G4) {
+ rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
+ wacom_report_rel(wcombo, REL_WHEEL, -rw);
+ } else
+ wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
+ /* fall through */
+
+ case 3: /* Mouse without wheel */
+ wacom->tool[0] = BTN_TOOL_MOUSE;
+ id = CURSOR_DEVICE_ID;
+ wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
+ wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
+ if (wacom->features->type == WACOM_G4)
+ wacom_report_abs(wcombo, ABS_DISTANCE, data[6]);
+ else
+ wacom_report_abs(wcombo, ABS_DISTANCE, data[7]);
+ break;
+ }
+ }
+
+ if (data[1] & 0x90) {
+ x = wacom_le16_to_cpu(&data[2]);
+ y = wacom_le16_to_cpu(&data[4]);
+ wacom_report_abs(wcombo, ABS_X, x);
+ wacom_report_abs(wcombo, ABS_Y, y);
+ if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+ wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
+ wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
+ }
+ }
+
+ if (data[1] & 0x10)
+ wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+ else
+ wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
+ wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10);
+ wacom_input_sync(wcombo);
+
+ /* send pad data */
+ if (wacom->features->type == WACOM_G4) {
+ if ( (wacom->serial[1] & 0xc0) != (data[7] & 0xf8) ) {
+ wacom->id[1] = 1;
+ wacom->serial[1] = (data[7] & 0xf8);
+ wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
+ wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
+ rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
+ wacom_report_rel(wcombo, REL_WHEEL, rw);
+ wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+ } else if (wacom->id[1]) {
+ wacom->id[1] = 0;
+ wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+ }
+ }
+ return 1;
+}
+
+static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
+{
+ unsigned char *data = wacom->data;
+ int idx;
+
+ /* tool number */
+ idx = data[1] & 0x01;
+
+ /* Enter report */
+ if ((data[1] & 0xfc) == 0xc0) {
+ /* serial number of the tool */
+ wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
+ (data[4] << 20) + (data[5] << 12) +
+ (data[6] << 4) + (data[7] >> 4);
+
+ wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+ switch (wacom->id[idx]) {
+ case 0x812: /* Inking pen */
+ case 0x801: /* Intuos3 Inking pen */
+ case 0x012:
+ wacom->tool[idx] = BTN_TOOL_PENCIL;
+ break;
+ case 0x822: /* Pen */
+ case 0x842:
+ case 0x852:
+ case 0x823: /* Intuos3 Grip Pen */
+ case 0x813: /* Intuos3 Classic Pen */
+ case 0x885: /* Intuos3 Marker Pen */
+ case 0x022:
+ wacom->tool[idx] = BTN_TOOL_PEN;
+ break;
+ case 0x832: /* Stroke pen */
+ case 0x032:
+ wacom->tool[idx] = BTN_TOOL_BRUSH;
+ break;
+ case 0x007: /* Mouse 4D and 2D */
+ case 0x09c:
+ case 0x094:
+ case 0x017: /* Intuos3 2D Mouse */
+ wacom->tool[idx] = BTN_TOOL_MOUSE;
+ break;
+ case 0x096: /* Lens cursor */
+ case 0x097: /* Intuos3 Lens cursor */
+ wacom->tool[idx] = BTN_TOOL_LENS;
+ break;
+ case 0x82a: /* Eraser */
+ case 0x85a:
+ case 0x91a:
+ case 0xd1a:
+ case 0x0fa:
+ case 0x82b: /* Intuos3 Grip Pen Eraser */
+ case 0x81b: /* Intuos3 Classic Pen Eraser */
+ case 0x91b: /* Intuos3 Airbrush Eraser */
+ wacom->tool[idx] = BTN_TOOL_RUBBER;
+ break;
+ case 0xd12:
+ case 0x912:
+ case 0x112:
+ case 0x913: /* Intuos3 Airbrush */
+ wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
+ break;
+ default: /* Unknown tool */
+ wacom->tool[idx] = BTN_TOOL_PEN;
+ }
+ /* only large I3 support Lens Cursor */
+ if(!((wacom->tool[idx] == BTN_TOOL_LENS) &&
+ (wacom->features->type == INTUOS3))) {
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
+ wacom_report_key(wcombo, wacom->tool[idx], 1);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+ return 2;
+ }
+ return 1;
+ }
+
+ /* Exit report */
+ if ((data[1] & 0xfe) == 0x80) {
+ wacom_report_key(wcombo, wacom->tool[idx], 0);
+ wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+ return 2;
+ }
+ return 0;
+}
+
+static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
+{
+ unsigned char *data = wacom->data;
+ unsigned int t;
+
+ /* general pen packet */
+ if ((data[1] & 0xb8) == 0xa0) {
+ t = (data[6] << 2) | ((data[7] >> 6) & 3);
+ wacom_report_abs(wcombo, ABS_PRESSURE, t);
+ wacom_report_abs(wcombo, ABS_TILT_X,
+ ((data[7] << 1) & 0x7e) | (data[8] >> 7));
+ wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4);
+ wacom_report_key(wcombo, BTN_TOUCH, t > 10);
+ }
+
+ /* airbrush second packet */
+ if ((data[1] & 0xbc) == 0xb4) {
+ wacom_report_abs(wcombo, ABS_WHEEL,
+ (data[6] << 2) | ((data[7] >> 6) & 3));
+ wacom_report_abs(wcombo, ABS_TILT_X,
+ ((data[7] << 1) & 0x7e) | (data[8] >> 7));
+ wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+ }
+ return;
+}
+
+static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ unsigned char *data = wacom->data;
+ unsigned int t;
+ int idx, result;
+
+ if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
+ dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
+ return 0;
+ }
+
+ wacom_input_regs(wcombo);
+
+ /* tool number */
+ idx = data[1] & 0x01;
+
+ /* pad packets. Works as a second tool and is always in prox */
+ if (data[0] == 12) {
+ /* initiate the pad as a device */
+ if (wacom->tool[1] != BTN_TOOL_FINGER)
+ wacom->tool[1] = BTN_TOOL_FINGER;
+
+ wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
+ wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
+ wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
+ wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
+ wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
+ wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
+ wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
+ wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
+ wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
+ wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+
+ if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2])
+ wacom_report_key(wcombo, wacom->tool[1], 1);
+ else
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
+ return 1;
+ }
+
+ /* process in/out prox events */
+ result = wacom_intuos_inout(wacom, wcombo);
+ if (result)
+ return result-1;
+
+ /* Cintiq doesn't send data when RDY bit isn't set */
+ if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
+ return 0;
+
+ if (wacom->features->type >= INTUOS3) {
+ wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
+ wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
+ wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
+ } else {
+ wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
+ }
+
+ /* process general packets */
+ wacom_intuos_general(wacom, wcombo);
+
+ /* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
+ if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
+
+ if (data[1] & 0x02) {
+ /* Rotation packet */
+ if (wacom->features->type >= INTUOS3) {
+ /* I3 marker pen rotation reported as wheel
+ * due to valuator limitation
+ */
+ t = (data[6] << 3) | ((data[7] >> 5) & 7);
+ t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
+ ((t-1) / 2 + 450)) : (450 - t / 2) ;
+ wacom_report_abs(wcombo, ABS_WHEEL, t);
+ } else {
+ /* 4D mouse rotation packet */
+ t = (data[6] << 3) | ((data[7] >> 5) & 7);
+ wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ?
+ ((t - 1) / 2) : -t / 2);
+ }
+
+ } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3) {
+ /* 4D mouse packet */
+ wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01);
+ wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
+ wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04);
+
+ wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x20);
+ wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x10);
+ t = (data[6] << 2) | ((data[7] >> 6) & 3);
+ wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
+
+ } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
+ /* 2D mouse packet */
+ wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x04);
+ wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
+ wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x10);
+ wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
+ - ((data[8] & 0x02) >> 1));
+
+ /* I3 2D mouse side buttons */
+ if (wacom->features->type == INTUOS3) {
+ wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x40);
+ wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x20);
+ }
+
+ } else if (wacom->features->type < INTUOS3) {
+ /* Lens cursor packets */
+ wacom_report_key(wcombo, BTN_LEFT, data[8] & 0x01);
+ wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
+ wacom_report_key(wcombo, BTN_RIGHT, data[8] & 0x04);
+ wacom_report_key(wcombo, BTN_SIDE, data[8] & 0x10);
+ wacom_report_key(wcombo, BTN_EXTRA, data[8] & 0x08);
+ }
+ }
+
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
+ wacom_report_key(wcombo, wacom->tool[idx], 1);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+ return 1;
+}
+
+int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
+{
+ switch (wacom_wac->features->type) {
+ case PENPARTNER:
+ return (wacom_penpartner_irq(wacom_wac, wcombo));
+ break;
+ case PL:
+ return (wacom_pl_irq(wacom_wac, wcombo));
+ break;
+ case WACOM_G4:
+ case GRAPHIRE:
+ return (wacom_graphire_irq(wacom_wac, wcombo));
+ break;
+ case PTU:
+ return (wacom_ptu_irq(wacom_wac, wcombo));
+ break;
+ case INTUOS:
+ case INTUOS3:
+ case INTUOS3L:
+ case CINTIQ:
+ return (wacom_intuos_irq(wacom_wac, wcombo));
+ break;
+ default:
+ return 0;
+ }
+ return 0;
+}
+
+void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+ switch (wacom_wac->features->type) {
+ case WACOM_G4:
+ input_dev_g4(input_dev, wacom_wac);
+ /* fall through */
+ case GRAPHIRE:
+ input_dev_g(input_dev, wacom_wac);
+ break;
+ case INTUOS3:
+ case INTUOS3L:
+ case CINTIQ:
+ input_dev_i3(input_dev, wacom_wac);
+ /* fall through */
+ case INTUOS:
+ input_dev_i(input_dev, wacom_wac);
+ break;
+ case PL:
+ case PTU:
+ input_dev_pl(input_dev, wacom_wac);
+ break;
+ case PENPARTNER:
+ input_dev_pt(input_dev, wacom_wac);
+ break;
+ }
+ return;
+}
+
+static struct wacom_features wacom_features[] = {
+ { "Wacom Penpartner", 7, 5040, 3780, 255, 32, PENPARTNER, wacom_sys_irq },
+ { "Wacom Graphire", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, WACOM_G4, wacom_sys_irq },
+ { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, WACOM_G4, wacom_sys_irq },
+ { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_sys_irq },
+ { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_sys_irq},
+ { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_sys_irq},
+ { "Wacom PL400", 8, 5408, 4056, 255, 32, PL, wacom_sys_irq },
+ { "Wacom PL500", 8, 6144, 4608, 255, 32, PL, wacom_sys_irq },
+ { "Wacom PL600", 8, 6126, 4604, 255, 32, PL, wacom_sys_irq },
+ { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_sys_irq },
+ { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_sys_irq },
+ { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_sys_irq },
+ { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_sys_irq },
+ { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_sys_irq },
+ { "Wacom DTU710", 8, 34080, 27660, 511, 32, PL, wacom_sys_irq },
+ { "Wacom DTF521", 8, 6282, 4762, 511, 32, PL, wacom_sys_irq },
+ { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_sys_irq },
+ { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PTU, wacom_sys_irq },
+ { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_sys_irq },
+ { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_sys_irq },
+ { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_sys_irq },
+ { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_sys_irq },
+ { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS3L, wacom_sys_irq },
+ { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS3L, wacom_sys_irq },
+ { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_sys_irq },
+ { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_sys_irq },
+ { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_sys_irq },
+ { }
+};
+
+static struct usb_device_id wacom_ids[] = {
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
+ { }
+};
+
+const struct usb_device_id * get_device_table(void) {
+ const struct usb_device_id * id_table = wacom_ids;
+ return id_table;
+}
+
+struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+ int index = id - wacom_ids;
+ struct wacom_features *wf = &wacom_features[index];
+ return wf;
+}
+
+MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/drivers/usb/input/wacom_wac.h b/drivers/usb/input/wacom_wac.h
new file mode 100644
index 0000000..ceae7bf
--- /dev/null
+++ b/drivers/usb/input/wacom_wac.h
@@ -0,0 +1,48 @@
+/*
+ * drivers/usb/input/wacom_wac.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef WACOM_WAC_H
+#define WACOM_WAC_H
+
+#define STYLUS_DEVICE_ID 0x02
+#define CURSOR_DEVICE_ID 0x06
+#define ERASER_DEVICE_ID 0x0A
+
+enum {
+ PENPARTNER = 0,
+ GRAPHIRE,
+ WACOM_G4,
+ PTU,
+ PL,
+ INTUOS,
+ INTUOS3,
+ INTUOS3L,
+ CINTIQ,
+ MAX_TYPE
+};
+
+struct wacom_features {
+ char *name;
+ int pktlen;
+ int x_max;
+ int y_max;
+ int pressure_max;
+ int distance_max;
+ int type;
+ usb_complete_t irq;
+};
+
+struct wacom_wac {
+ signed char *data;
+ int tool[2];
+ int id[2];
+ __u32 serial[2];
+ struct wacom_features *features;
+};
+
+#endif
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 7b45fd3..7291e7a 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -971,7 +971,7 @@
DRIVER_VERSION, sizeof(DRIVER_VERSION));
/* Register sysfs hooks (don't care about failure) */
- sysfs_create_group(&intf->dev.kobj, &yld_attr_group);
+ ret = sysfs_create_group(&intf->dev.kobj, &yld_attr_group);
return 0;
}
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 88928a4..c29658f 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -32,6 +32,16 @@
To compile this driver as a module, choose M here: the
module will be called emi26.
+config USB_ADUTUX
+ tristate "ADU devices from Ontrak Control Systems (EXPERIMENTAL)"
+ depends on USB && EXPERIMENTAL
+ help
+ Say Y if you want to use an ADU device from Ontrak Control
+ Systems.
+
+ To compile this driver as a module, choose M here. The module
+ will be called adutux.
+
config USB_AUERSWALD
tristate "USB Auerswald ISDN support (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
@@ -115,19 +125,36 @@
To compile this driver as a module, choose M here: the
module will be called cytherm.
-config USB_PHIDGETKIT
- tristate "USB PhidgetKit support"
+config USB_PHIDGET
+ tristate "USB Phidgets drivers"
depends on USB
help
- Say Y here if you want to connect a PhidgetKit USB device from
- Phidgets Inc.
+ Say Y here to enable the various drivers for devices from
+ Phidgets inc.
+
+config USB_PHIDGETKIT
+ tristate "USB PhidgetInterfaceKit support"
+ depends on USB_PHIDGET
+ help
+ Say Y here if you want to connect a PhidgetInterfaceKit USB device
+ from Phidgets Inc.
To compile this driver as a module, choose M here: the
module will be called phidgetkit.
+config USB_PHIDGETMOTORCONTROL
+ tristate "USB PhidgetMotorControl support"
+ depends on USB_PHIDGET
+ help
+ Say Y here if you want to connect a PhidgetMotorControl USB device
+ from Phidgets Inc.
+
+ To compile this driver as a module, choose M here: the
+ module will be called phidgetmotorcontrol.
+
config USB_PHIDGETSERVO
tristate "USB PhidgetServo support"
- depends on USB
+ depends on USB_PHIDGET
help
Say Y here if you want to connect an 1 or 4 Motor PhidgetServo
servo controller version 2.0 or 3.0.
@@ -151,6 +178,30 @@
See also <http://www.fs.tum.de/~echtler/idmouse/>.
+config USB_FTDI_ELAN
+ tristate "Elan PCMCIA CardBus Adapter USB Client"
+ depends on USB
+ default M
+ help
+ ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
+ Currently only the U132 adapter is available.
+
+ The U132 is specifically designed for CardBus PC cards that contain
+ an OHCI host controller. Typical PC cards are the Orange Mobile 3G
+ Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
+ with PC cards that do not contain an OHCI controller. To use a U132
+ adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
+ module which is a USB host controller driver that talks to the OHCI
+ controller within CardBus card that are inserted in the U132 adapter.
+
+ This driver has been tested with a CardBus OHCI USB adapter, and
+ worked with a USB PEN Drive inserted into the first USB port of
+ the PCCARD. A rather pointless thing to do, but useful for testing.
+
+ See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
+
+ It is safe to say M here.
+
config USB_APPLEDISPLAY
tristate "Apple Cinema Display support"
depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 2927260..2be70fa 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -3,22 +3,25 @@
# (the ones that don't fit into any other categories)
#
+obj-$(CONFIG_USB_ADUTUX) += adutux.o
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
obj-$(CONFIG_USB_CYTHERM) += cytherm.o
obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_EMI62) += emi62.o
+obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LED) += usbled.o
obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
+obj-$(CONFIG_USB_PHIDGET) += phidget.o
obj-$(CONFIG_USB_PHIDGETKIT) += phidgetkit.o
+obj-$(CONFIG_USB_PHIDGETMOTORCONTROL) += phidgetmotorcontrol.o
obj-$(CONFIG_USB_PHIDGETSERVO) += phidgetservo.o
obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_TEST) += usbtest.o
obj-$(CONFIG_USB_USS720) += uss720.o
-obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o
obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
new file mode 100644
index 0000000..d396319
--- /dev/null
+++ b/drivers/usb/misc/adutux.c
@@ -0,0 +1,900 @@
+/*
+ * adutux - driver for ADU devices from Ontrak Control Systems
+ * This is an experimental driver. Use at your own risk.
+ * This driver is not supported by Ontrak Control Systems.
+ *
+ * Copyright (c) 2003 John Homppi (SCO, leave this notice here)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * derived from the Lego USB Tower driver 0.56:
+ * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net>
+ * 2001 Juergen Stuber <stuber@loria.fr>
+ * that was derived from USB Skeleton driver - 0.5
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 5;
+#else
+static int debug = 1;
+#endif
+
+/* Use our own dbg macro */
+#undef dbg
+#define dbg(lvl, format, arg...) \
+do { \
+ if (debug >= lvl) \
+ printk(KERN_DEBUG __FILE__ " : " format " \n", ## arg); \
+} while (0)
+
+
+/* Version Information */
+#define DRIVER_VERSION "v0.0.13"
+#define DRIVER_AUTHOR "John Homppi"
+#define DRIVER_DESC "adutux (see www.ontrak.net)"
+
+/* Module parameters */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+/* Define these values to match your device */
+#define ADU_VENDOR_ID 0x0a07
+#define ADU_PRODUCT_ID 0x0064
+
+/* table of devices that work with this driver */
+static struct usb_device_id device_table [] = {
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */
+ { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */
+ { }/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define ADU_MINOR_BASE 0
+#else
+#define ADU_MINOR_BASE 67
+#endif
+
+/* we can have up to this number of device plugged in at once */
+#define MAX_DEVICES 16
+
+#define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a command */
+
+/* Structure to hold all of our device specific stuff */
+struct adu_device {
+ struct semaphore sem; /* locks this structure */
+ struct usb_device* udev; /* save off the usb device pointer */
+ struct usb_interface* interface;
+ unsigned char minor; /* the starting minor number for this device */
+ char serial_number[8];
+
+ int open_count; /* number of times this port has been opened */
+
+ char* read_buffer_primary;
+ int read_buffer_length;
+ char* read_buffer_secondary;
+ int secondary_head;
+ int secondary_tail;
+ spinlock_t buflock;
+
+ wait_queue_head_t read_wait;
+ wait_queue_head_t write_wait;
+
+ char* interrupt_in_buffer;
+ struct usb_endpoint_descriptor* interrupt_in_endpoint;
+ struct urb* interrupt_in_urb;
+ int read_urb_finished;
+
+ char* interrupt_out_buffer;
+ struct usb_endpoint_descriptor* interrupt_out_endpoint;
+ struct urb* interrupt_out_urb;
+};
+
+/* prevent races between open() and disconnect */
+static DEFINE_MUTEX(disconnect_mutex);
+static struct usb_driver adu_driver;
+
+static void adu_debug_data(int level, const char *function, int size,
+ const unsigned char *data)
+{
+ int i;
+
+ if (debug < level)
+ return;
+
+ printk(KERN_DEBUG __FILE__": %s - length = %d, data = ",
+ function, size);
+ for (i = 0; i < size; ++i)
+ printk("%.2x ", data[i]);
+ printk("\n");
+}
+
+/**
+ * adu_abort_transfers
+ * aborts transfers and frees associated data structures
+ */
+static void adu_abort_transfers(struct adu_device *dev)
+{
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (dev == NULL) {
+ dbg(1," %s : dev is null", __FUNCTION__);
+ goto exit;
+ }
+
+ if (dev->udev == NULL) {
+ dbg(1," %s : udev is null", __FUNCTION__);
+ goto exit;
+ }
+
+ dbg(2," %s : udev state %d", __FUNCTION__, dev->udev->state);
+ if (dev->udev->state == USB_STATE_NOTATTACHED) {
+ dbg(1," %s : udev is not attached", __FUNCTION__);
+ goto exit;
+ }
+
+ /* shutdown transfer */
+ usb_unlink_urb(dev->interrupt_in_urb);
+ usb_unlink_urb(dev->interrupt_out_urb);
+
+exit:
+ dbg(2," %s : leave", __FUNCTION__);
+}
+
+static void adu_delete(struct adu_device *dev)
+{
+ dbg(2, "%s enter", __FUNCTION__);
+
+ adu_abort_transfers(dev);
+
+ /* free data structures */
+ usb_free_urb(dev->interrupt_in_urb);
+ usb_free_urb(dev->interrupt_out_urb);
+ kfree(dev->read_buffer_primary);
+ kfree(dev->read_buffer_secondary);
+ kfree(dev->interrupt_in_buffer);
+ kfree(dev->interrupt_out_buffer);
+ kfree(dev);
+
+ dbg(2, "%s : leave", __FUNCTION__);
+}
+
+static void adu_interrupt_in_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct adu_device *dev = urb->context;
+
+ dbg(4," %s : enter, status %d", __FUNCTION__, urb->status);
+ adu_debug_data(5, __FUNCTION__, urb->actual_length,
+ urb->transfer_buffer);
+
+ spin_lock(&dev->buflock);
+
+ if (urb->status != 0) {
+ if ((urb->status != -ENOENT) && (urb->status != -ECONNRESET)) {
+ dbg(1," %s : nonzero status received: %d",
+ __FUNCTION__, urb->status);
+ }
+ goto exit;
+ }
+
+ if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) {
+ if (dev->read_buffer_length <
+ (4 * le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize)) -
+ (urb->actual_length)) {
+ memcpy (dev->read_buffer_primary +
+ dev->read_buffer_length,
+ dev->interrupt_in_buffer, urb->actual_length);
+
+ dev->read_buffer_length += urb->actual_length;
+ dbg(2," %s reading %d ", __FUNCTION__,
+ urb->actual_length);
+ } else {
+ dbg(1," %s : read_buffer overflow", __FUNCTION__);
+ }
+ }
+
+exit:
+ dev->read_urb_finished = 1;
+ spin_unlock(&dev->buflock);
+ /* always wake up so we recover from errors */
+ wake_up_interruptible(&dev->read_wait);
+ adu_debug_data(5, __FUNCTION__, urb->actual_length,
+ urb->transfer_buffer);
+ dbg(4," %s : leave, status %d", __FUNCTION__, urb->status);
+}
+
+static void adu_interrupt_out_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct adu_device *dev = urb->context;
+
+ dbg(4," %s : enter, status %d", __FUNCTION__, urb->status);
+ adu_debug_data(5,__FUNCTION__, urb->actual_length, urb->transfer_buffer);
+
+ if (urb->status != 0) {
+ if ((urb->status != -ENOENT) &&
+ (urb->status != -ECONNRESET)) {
+ dbg(1, " %s :nonzero status received: %d",
+ __FUNCTION__, urb->status);
+ }
+ goto exit;
+ }
+
+ wake_up_interruptible(&dev->write_wait);
+exit:
+
+ adu_debug_data(5, __FUNCTION__, urb->actual_length,
+ urb->transfer_buffer);
+ dbg(4," %s : leave, status %d", __FUNCTION__, urb->status);
+}
+
+static int adu_open(struct inode *inode, struct file *file)
+{
+ struct adu_device *dev = NULL;
+ struct usb_interface *interface;
+ int subminor;
+ int retval = 0;
+
+ dbg(2,"%s : enter", __FUNCTION__);
+
+ subminor = iminor(inode);
+
+ mutex_lock(&disconnect_mutex);
+
+ interface = usb_find_interface(&adu_driver, subminor);
+ if (!interface) {
+ err("%s - error, can't find device for minor %d",
+ __FUNCTION__, subminor);
+ retval = -ENODEV;
+ goto exit_no_device;
+ }
+
+ dev = usb_get_intfdata(interface);
+ if (!dev) {
+ retval = -ENODEV;
+ goto exit_no_device;
+ }
+
+ /* lock this device */
+ if ((retval = down_interruptible(&dev->sem))) {
+ dbg(2, "%s : sem down failed", __FUNCTION__);
+ goto exit_no_device;
+ }
+
+ /* increment our usage count for the device */
+ ++dev->open_count;
+ dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count);
+
+ /* save device in the file's private structure */
+ file->private_data = dev;
+
+ /* initialize in direction */
+ dev->read_buffer_length = 0;
+
+ /* fixup first read by having urb waiting for it */
+ usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->interrupt_in_endpoint->bEndpointAddress),
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback, dev,
+ dev->interrupt_in_endpoint->bInterval);
+ /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->read_urb_finished = 0;
+ usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ /* we ignore failure */
+ /* end of fixup for first read */
+
+ up(&dev->sem);
+
+exit_no_device:
+ mutex_unlock(&disconnect_mutex);
+ dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval);
+
+ return retval;
+}
+
+static int adu_release_internal(struct adu_device *dev)
+{
+ int retval = 0;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (dev->udev == NULL) {
+ /* the device was unplugged before the file was released */
+ adu_delete(dev);
+ goto exit;
+ }
+
+ /* decrement our usage count for the device */
+ --dev->open_count;
+ dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
+ if (dev->open_count <= 0) {
+ adu_abort_transfers(dev);
+ dev->open_count = 0;
+ }
+
+exit:
+ dbg(2," %s : leave", __FUNCTION__);
+ return retval;
+}
+
+static int adu_release(struct inode *inode, struct file *file)
+{
+ struct adu_device *dev = NULL;
+ int retval = 0;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (file == NULL) {
+ dbg(1," %s : file is NULL", __FUNCTION__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ dev = file->private_data;
+
+ if (dev == NULL) {
+ dbg(1," %s : object is NULL", __FUNCTION__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ /* lock our device */
+ down(&dev->sem); /* not interruptible */
+
+ if (dev->open_count <= 0) {
+ dbg(1," %s : device not opened", __FUNCTION__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ /* do the work */
+ retval = adu_release_internal(dev);
+
+exit:
+ up(&dev->sem);
+ dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ return retval;
+}
+
+static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
+ loff_t *ppos)
+{
+ struct adu_device *dev;
+ size_t bytes_read = 0;
+ size_t bytes_to_read = count;
+ int i;
+ int retval = 0;
+ int timeout = 0;
+ int should_submit = 0;
+ unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+
+ dbg(2," %s : enter, count = %Zd, file=%p", __FUNCTION__, count, file);
+
+ dev = file->private_data;
+ dbg(2," %s : dev=%p", __FUNCTION__, dev);
+ /* lock this object */
+ if (down_interruptible(&dev->sem))
+ return -ERESTARTSYS;
+
+ /* verify that the device wasn't unplugged */
+ if (dev->udev == NULL || dev->minor == 0) {
+ retval = -ENODEV;
+ err("No device or device unplugged %d", retval);
+ goto exit;
+ }
+
+ /* verify that some data was requested */
+ if (count == 0) {
+ dbg(1," %s : read request of 0 bytes", __FUNCTION__);
+ goto exit;
+ }
+
+ timeout = COMMAND_TIMEOUT;
+ dbg(2," %s : about to start looping", __FUNCTION__);
+ while (bytes_to_read) {
+ int data_in_secondary = dev->secondary_tail - dev->secondary_head;
+ dbg(2," %s : while, data_in_secondary=%d, status=%d",
+ __FUNCTION__, data_in_secondary,
+ dev->interrupt_in_urb->status);
+
+ if (data_in_secondary) {
+ /* drain secondary buffer */
+ int amount = bytes_to_read < data_in_secondary ? bytes_to_read : data_in_secondary;
+ i = copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount);
+ if (i < 0) {
+ retval = -EFAULT;
+ goto exit;
+ }
+ dev->secondary_head += (amount - i);
+ bytes_read += (amount - i);
+ bytes_to_read -= (amount - i);
+ if (i) {
+ retval = bytes_read ? bytes_read : -EFAULT;
+ goto exit;
+ }
+ } else {
+ /* we check the primary buffer */
+ spin_lock_irqsave (&dev->buflock, flags);
+ if (dev->read_buffer_length) {
+ /* we secure access to the primary */
+ char *tmp;
+ dbg(2," %s : swap, read_buffer_length = %d",
+ __FUNCTION__, dev->read_buffer_length);
+ tmp = dev->read_buffer_secondary;
+ dev->read_buffer_secondary = dev->read_buffer_primary;
+ dev->read_buffer_primary = tmp;
+ dev->secondary_head = 0;
+ dev->secondary_tail = dev->read_buffer_length;
+ dev->read_buffer_length = 0;
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ /* we have a free buffer so use it */
+ should_submit = 1;
+ } else {
+ /* even the primary was empty - we may need to do IO */
+ if (dev->interrupt_in_urb->status == -EINPROGRESS) {
+ /* somebody is doing IO */
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ dbg(2," %s : submitted already", __FUNCTION__);
+ } else {
+ /* we must initiate input */
+ dbg(2," %s : initiate input", __FUNCTION__);
+ dev->read_urb_finished = 0;
+
+ usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->interrupt_in_endpoint->bEndpointAddress),
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ if (!retval) {
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ dbg(2," %s : submitted OK", __FUNCTION__);
+ } else {
+ if (retval == -ENOMEM) {
+ retval = bytes_read ? bytes_read : -ENOMEM;
+ }
+ spin_unlock_irqrestore(&dev->buflock, flags);
+ dbg(2," %s : submit failed", __FUNCTION__);
+ goto exit;
+ }
+ }
+
+ /* we wait for I/O to complete */
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&dev->read_wait, &wait);
+ if (!dev->read_urb_finished)
+ timeout = schedule_timeout(COMMAND_TIMEOUT);
+ else
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dev->read_wait, &wait);
+
+ if (timeout <= 0) {
+ dbg(2," %s : timeout", __FUNCTION__);
+ retval = bytes_read ? bytes_read : -ETIMEDOUT;
+ goto exit;
+ }
+
+ if (signal_pending(current)) {
+ dbg(2," %s : signal pending", __FUNCTION__);
+ retval = bytes_read ? bytes_read : -EINTR;
+ goto exit;
+ }
+ }
+ }
+ }
+
+ retval = bytes_read;
+ /* if the primary buffer is empty then use it */
+ if (should_submit && !dev->interrupt_in_urb->status==-EINPROGRESS) {
+ usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->interrupt_in_endpoint->bEndpointAddress),
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->read_urb_finished = 0;
+ usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ /* we ignore failure */
+ }
+
+exit:
+ /* unlock the device */
+ up(&dev->sem);
+
+ dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ return retval;
+}
+
+static ssize_t adu_write(struct file *file, const __user char *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct adu_device *dev;
+ size_t bytes_written = 0;
+ size_t bytes_to_write;
+ size_t buffer_size;
+ int retval = 0;
+ int timeout = 0;
+
+ dbg(2," %s : enter, count = %Zd", __FUNCTION__, count);
+
+ dev = file->private_data;
+
+ /* lock this object */
+ down_interruptible(&dev->sem);
+
+ /* verify that the device wasn't unplugged */
+ if (dev->udev == NULL || dev->minor == 0) {
+ retval = -ENODEV;
+ err("No device or device unplugged %d", retval);
+ goto exit;
+ }
+
+ /* verify that we actually have some data to write */
+ if (count == 0) {
+ dbg(1," %s : write request of 0 bytes", __FUNCTION__);
+ goto exit;
+ }
+
+
+ while (count > 0) {
+ if (dev->interrupt_out_urb->status == -EINPROGRESS) {
+ timeout = COMMAND_TIMEOUT;
+
+ while (timeout > 0) {
+ if (signal_pending(current)) {
+ dbg(1," %s : interrupted", __FUNCTION__);
+ retval = -EINTR;
+ goto exit;
+ }
+ up(&dev->sem);
+ timeout = interruptible_sleep_on_timeout(&dev->write_wait, timeout);
+ down_interruptible(&dev->sem);
+ if (timeout > 0) {
+ break;
+ }
+ dbg(1," %s : interrupted timeout: %d", __FUNCTION__, timeout);
+ }
+
+
+ dbg(1," %s : final timeout: %d", __FUNCTION__, timeout);
+
+ if (timeout == 0) {
+ dbg(1, "%s - command timed out.", __FUNCTION__);
+ retval = -ETIMEDOUT;
+ goto exit;
+ }
+
+ dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count);
+
+ } else {
+ dbg(4," %s : sending, count = %Zd", __FUNCTION__, count);
+
+ /* write the data into interrupt_out_buffer from userspace */
+ buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize);
+ bytes_to_write = count > buffer_size ? buffer_size : count;
+ dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd",
+ __FUNCTION__, buffer_size, count, bytes_to_write);
+
+ if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) {
+ retval = -EFAULT;
+ goto exit;
+ }
+
+ /* send off the urb */
+ usb_fill_int_urb(
+ dev->interrupt_out_urb,
+ dev->udev,
+ usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress),
+ dev->interrupt_out_buffer,
+ bytes_to_write,
+ adu_interrupt_out_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->interrupt_out_urb->actual_length = bytes_to_write;
+ retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
+ if (retval < 0) {
+ err("Couldn't submit interrupt_out_urb %d", retval);
+ goto exit;
+ }
+
+ buffer += bytes_to_write;
+ count -= bytes_to_write;
+
+ bytes_written += bytes_to_write;
+ }
+ }
+
+ retval = bytes_written;
+
+exit:
+ /* unlock the device */
+ up(&dev->sem);
+
+ dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+
+ return retval;
+}
+
+/* file operations needed when we register this driver */
+static struct file_operations adu_fops = {
+ .owner = THIS_MODULE,
+ .read = adu_read,
+ .write = adu_write,
+ .open = adu_open,
+ .release = adu_release,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with devfs and the driver core
+ */
+static struct usb_class_driver adu_class = {
+ .name = "usb/adutux%d",
+ .fops = &adu_fops,
+ .minor_base = ADU_MINOR_BASE,
+};
+
+/**
+ * adu_probe
+ *
+ * Called by the usb core when a new device is connected that it thinks
+ * this driver might be interested in.
+ */
+static int adu_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct adu_device *dev = NULL;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ int retval = -ENODEV;
+ int in_end_size;
+ int out_end_size;
+ int i;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (udev == NULL) {
+ dev_err(&interface->dev, "udev is NULL.\n");
+ goto exit;
+ }
+
+ /* allocate memory for our device state and intialize it */
+ dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
+ if (dev == NULL) {
+ dev_err(&interface->dev, "Out of memory\n");
+ retval = -ENOMEM;
+ goto exit;
+ }
+
+ init_MUTEX(&dev->sem);
+ spin_lock_init(&dev->buflock);
+ dev->udev = udev;
+ init_waitqueue_head(&dev->read_wait);
+ init_waitqueue_head(&dev->write_wait);
+
+ iface_desc = &interface->altsetting[0];
+
+ /* set up the endpoint information */
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ if (usb_endpoint_is_int_in(endpoint))
+ dev->interrupt_in_endpoint = endpoint;
+
+ if (usb_endpoint_is_int_out(endpoint))
+ dev->interrupt_out_endpoint = endpoint;
+ }
+ if (dev->interrupt_in_endpoint == NULL) {
+ dev_err(&interface->dev, "interrupt in endpoint not found\n");
+ goto error;
+ }
+ if (dev->interrupt_out_endpoint == NULL) {
+ dev_err(&interface->dev, "interrupt out endpoint not found\n");
+ goto error;
+ }
+
+ in_end_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize);
+ out_end_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize);
+
+ dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL);
+ if (!dev->read_buffer_primary) {
+ dev_err(&interface->dev, "Couldn't allocate read_buffer_primary\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* debug code prime the buffer */
+ memset(dev->read_buffer_primary, 'a', in_end_size);
+ memset(dev->read_buffer_primary + in_end_size, 'b', in_end_size);
+ memset(dev->read_buffer_primary + (2 * in_end_size), 'c', in_end_size);
+ memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size);
+
+ dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL);
+ if (!dev->read_buffer_secondary) {
+ dev_err(&interface->dev, "Couldn't allocate read_buffer_secondary\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ /* debug code prime the buffer */
+ memset(dev->read_buffer_secondary, 'e', in_end_size);
+ memset(dev->read_buffer_secondary + in_end_size, 'f', in_end_size);
+ memset(dev->read_buffer_secondary + (2 * in_end_size), 'g', in_end_size);
+ memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size);
+
+ dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL);
+ if (!dev->interrupt_in_buffer) {
+ dev_err(&interface->dev, "Couldn't allocate interrupt_in_buffer\n");
+ goto error;
+ }
+
+ /* debug code prime the buffer */
+ memset(dev->interrupt_in_buffer, 'i', in_end_size);
+
+ dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->interrupt_in_urb) {
+ dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n");
+ goto error;
+ }
+ dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL);
+ if (!dev->interrupt_out_buffer) {
+ dev_err(&interface->dev, "Couldn't allocate interrupt_out_buffer\n");
+ goto error;
+ }
+ dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->interrupt_out_urb) {
+ dev_err(&interface->dev, "Couldn't allocate interrupt_out_urb\n");
+ goto error;
+ }
+
+ if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number,
+ sizeof(dev->serial_number))) {
+ dev_err(&interface->dev, "Could not retrieve serial number\n");
+ goto error;
+ }
+ dbg(2," %s : serial_number=%s", __FUNCTION__, dev->serial_number);
+
+ /* we can register the device now, as it is ready */
+ usb_set_intfdata(interface, dev);
+
+ retval = usb_register_dev(interface, &adu_class);
+
+ if (retval) {
+ /* something prevented us from registering this driver */
+ dev_err(&interface->dev, "Not able to get a minor for this device.\n");
+ usb_set_intfdata(interface, NULL);
+ goto error;
+ }
+
+ dev->minor = interface->minor;
+
+ /* let the user know what node this device is now attached to */
+ dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d",
+ udev->descriptor.idProduct, dev->serial_number,
+ (dev->minor - ADU_MINOR_BASE));
+exit:
+ dbg(2," %s : leave, return value %p (dev)", __FUNCTION__, dev);
+
+ return retval;
+
+error:
+ adu_delete(dev);
+ return retval;
+}
+
+/**
+ * adu_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ */
+static void adu_disconnect(struct usb_interface *interface)
+{
+ struct adu_device *dev;
+ int minor;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ mutex_lock(&disconnect_mutex); /* not interruptible */
+
+ dev = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ down(&dev->sem); /* not interruptible */
+
+ minor = dev->minor;
+
+ /* give back our minor */
+ usb_deregister_dev(interface, &adu_class);
+ dev->minor = 0;
+
+ /* if the device is not opened, then we clean up right now */
+ dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
+ if (!dev->open_count) {
+ up(&dev->sem);
+ adu_delete(dev);
+ } else {
+ dev->udev = NULL;
+ up(&dev->sem);
+ }
+
+ mutex_unlock(&disconnect_mutex);
+
+ dev_info(&interface->dev, "ADU device adutux%d now disconnected",
+ (minor - ADU_MINOR_BASE));
+
+ dbg(2," %s : leave", __FUNCTION__);
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver adu_driver = {
+ .name = "adutux",
+ .probe = adu_probe,
+ .disconnect = adu_disconnect,
+ .id_table = device_table,
+};
+
+static int __init adu_init(void)
+{
+ int result;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&adu_driver);
+ if (result < 0) {
+ err("usb_register failed for the "__FILE__" driver. "
+ "Error number %d", result);
+ goto exit;
+ }
+
+ info("adutux " DRIVER_DESC " " DRIVER_VERSION);
+ info("adutux is an experimental driver. Use at your own risk");
+
+exit:
+ dbg(2," %s : leave, return value %d", __FUNCTION__, result);
+
+ return result;
+}
+
+static void __exit adu_exit(void)
+{
+ dbg(2," %s : enter", __FUNCTION__);
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&adu_driver);
+ dbg(2," %s : leave", __FUNCTION__);
+}
+
+module_init(adu_init);
+module_exit(adu_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 1fef36e..4fd2110 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -806,7 +806,7 @@
0 Initial, OK
-EINPROGRESS during submission until end
-ENOENT if urb is unlinked
--ETIMEDOUT Transfer timed out, NAK
+-ETIME Device did not respond
-ENOMEM Memory Overflow
-ENODEV Specified USB-device or bus doesn't exist
-ENXIO URB already queued
@@ -832,7 +832,7 @@
{
switch (status) {
case 0:
- case -ETIMEDOUT:
+ case -ETIME:
case -EOVERFLOW:
case -EAGAIN:
case -EPIPE:
@@ -1858,7 +1858,7 @@
/*----------------------------------------------------------------------*/
/* File operation structure */
-static struct file_operations auerswald_fops =
+static const struct file_operations auerswald_fops =
{
.owner = THIS_MODULE,
.llseek = no_llseek,
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 9c46746..b63b5f3 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -209,7 +209,7 @@
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory!\n");
- goto error;
+ goto error_mem;
}
dev->udev = usb_get_dev(interface_to_usbdev(interface));
@@ -218,15 +218,26 @@
usb_set_intfdata(interface, dev);
/* create device attribute files */
- device_create_file(&interface->dev, &dev_attr_port0);
- device_create_file(&interface->dev, &dev_attr_port1);
+ retval = device_create_file(&interface->dev, &dev_attr_port0);
+ if (retval)
+ goto error;
+ retval = device_create_file(&interface->dev, &dev_attr_port1);
+ if (retval)
+ goto error;
/* let the user know that the device is now attached */
dev_info(&interface->dev,
"Cypress CY7C63xxx device now attached\n");
+ return 0;
- retval = 0;
error:
+ device_remove_file(&interface->dev, &dev_attr_port0);
+ device_remove_file(&interface->dev, &dev_attr_port1);
+ usb_set_intfdata(interface, NULL);
+ usb_put_dev(dev->udev);
+ kfree(dev);
+
+error_mem:
return retval;
}
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index b20bec4..04e87ac 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -353,7 +353,7 @@
dev = kzalloc (sizeof(struct usb_cytherm), GFP_KERNEL);
if (dev == NULL) {
dev_err (&interface->dev, "Out of memory\n");
- goto error;
+ goto error_mem;
}
dev->udev = usb_get_dev(udev);
@@ -362,18 +362,35 @@
dev->brightness = 0xFF;
- device_create_file(&interface->dev, &dev_attr_brightness);
- device_create_file(&interface->dev, &dev_attr_temp);
- device_create_file(&interface->dev, &dev_attr_button);
- device_create_file(&interface->dev, &dev_attr_port0);
- device_create_file(&interface->dev, &dev_attr_port1);
+ retval = device_create_file(&interface->dev, &dev_attr_brightness);
+ if (retval)
+ goto error;
+ retval = device_create_file(&interface->dev, &dev_attr_temp);
+ if (retval)
+ goto error;
+ retval = device_create_file(&interface->dev, &dev_attr_button);
+ if (retval)
+ goto error;
+ retval = device_create_file(&interface->dev, &dev_attr_port0);
+ if (retval)
+ goto error;
+ retval = device_create_file(&interface->dev, &dev_attr_port1);
+ if (retval)
+ goto error;
- dev_info (&interface->dev,
+ dev_info (&interface->dev,
"Cypress thermometer device now attached\n");
return 0;
-
- error:
+error:
+ device_remove_file(&interface->dev, &dev_attr_brightness);
+ device_remove_file(&interface->dev, &dev_attr_temp);
+ device_remove_file(&interface->dev, &dev_attr_button);
+ device_remove_file(&interface->dev, &dev_attr_port0);
+ device_remove_file(&interface->dev, &dev_attr_port1);
+ usb_set_intfdata (interface, NULL);
+ usb_put_dev(dev->udev);
kfree(dev);
+error_mem:
return retval;
}
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
new file mode 100644
index 0000000..b88a094
--- /dev/null
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -0,0 +1,2809 @@
+/*
+* USB FTDI client driver for Elan Digital Systems's Uxxx adapters
+*
+* Copyright(C) 2006 Elan Digital Systems Limited
+* http://www.elandigitalsystems.com
+*
+* Author and Maintainer - Tony Olech - Elan Digital Systems
+* tony.olech@elandigitalsystems.com
+*
+* This program is free software;you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation, version 2.
+*
+*
+* This driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
+* based on various USB client drivers in the 2.6.15 linux kernel
+* with constant reference to the 3rd Edition of Linux Device Drivers
+* published by O'Reilly
+*
+* The U132 adapter is a USB to CardBus adapter specifically designed
+* for PC cards that contain an OHCI host controller. Typical PC cards
+* are the Orange Mobile 3G Option GlobeTrotter Fusion card.
+*
+* The U132 adapter will *NOT *work with PC cards that do not contain
+* an OHCI controller. A simple way to test whether a PC card has an
+* OHCI controller as an interface is to insert the PC card directly
+* into a laptop(or desktop) with a CardBus slot and if "lspci" shows
+* a new USB controller and "lsusb -v" shows a new OHCI Host Controller
+* then there is a good chance that the U132 adapter will support the
+* PC card.(you also need the specific client driver for the PC card)
+*
+* Please inform the Author and Maintainer about any PC cards that
+* contain OHCI Host Controller and work when directly connected to
+* an embedded CardBus slot but do not work when they are connected
+* via an ELAN U132 adapter.
+*
+*/
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/ioctl.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <asm/uaccess.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+MODULE_AUTHOR("Tony Olech");
+MODULE_DESCRIPTION("FTDI ELAN driver");
+MODULE_LICENSE("GPL");
+#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
+extern struct platform_driver u132_platform_driver;
+static struct workqueue_struct *status_queue;
+static struct workqueue_struct *command_queue;
+static struct workqueue_struct *respond_queue;
+/*
+* ftdi_module_lock exists to protect access to global variables
+*
+*/
+static struct semaphore ftdi_module_lock;
+static int ftdi_instances = 0;
+static struct list_head ftdi_static_list;
+/*
+* end of the global variables protected by ftdi_module_lock
+*/
+#include "usb_u132.h"
+#define TD_DEVNOTRESP 5
+/* Define these values to match your devices*/
+#define USB_FTDI_ELAN_VENDOR_ID 0x0403
+#define USB_FTDI_ELAN_PRODUCT_ID 0xd6ea
+/* table of devices that work with this driver*/
+static struct usb_device_id ftdi_elan_table[] = {
+ {USB_DEVICE(USB_FTDI_ELAN_VENDOR_ID, USB_FTDI_ELAN_PRODUCT_ID)},
+ { /* Terminating entry */ }
+};
+
+MODULE_DEVICE_TABLE(usb, ftdi_elan_table);
+/* only the jtag(firmware upgrade device) interface requires
+* a device file and corresponding minor number, but the
+* interface is created unconditionally - I suppose it could
+* be configured or not according to a module parameter.
+* But since we(now) require one interface per device,
+* and since it unlikely that a normal installation would
+* require more than a couple of elan-ftdi devices, 8 seems
+* like a reasonable limit to have here, and if someone
+* really requires more than 8 devices, then they can frig the
+* code and recompile
+*/
+#define USB_FTDI_ELAN_MINOR_BASE 192
+#define COMMAND_BITS 5
+#define COMMAND_SIZE (1<<COMMAND_BITS)
+#define COMMAND_MASK (COMMAND_SIZE-1)
+struct u132_command {
+ u8 header;
+ u16 length;
+ u8 address;
+ u8 width;
+ u32 value;
+ int follows;
+ void *buffer;
+};
+#define RESPOND_BITS 5
+#define RESPOND_SIZE (1<<RESPOND_BITS)
+#define RESPOND_MASK (RESPOND_SIZE-1)
+struct u132_respond {
+ u8 header;
+ u8 address;
+ u32 *value;
+ int *result;
+ struct completion wait_completion;
+};
+struct u132_target {
+ void *endp;
+ struct urb *urb;
+ int toggle_bits;
+ int error_count;
+ int condition_code;
+ int repeat_number;
+ int halted;
+ int skipped;
+ int actual;
+ int non_null;
+ int active;
+ int abandoning;
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code,
+ int repeat_number, int halted, int skipped, int actual,
+ int non_null);
+};
+/* Structure to hold all of our device specific stuff*/
+struct usb_ftdi {
+ struct list_head ftdi_list;
+ struct semaphore u132_lock;
+ int command_next;
+ int command_head;
+ struct u132_command command[COMMAND_SIZE];
+ int respond_next;
+ int respond_head;
+ struct u132_respond respond[RESPOND_SIZE];
+ struct u132_target target[4];
+ char device_name[16];
+ unsigned synchronized:1;
+ unsigned enumerated:1;
+ unsigned registered:1;
+ unsigned initialized:1;
+ unsigned card_ejected:1;
+ int function;
+ int sequence_num;
+ int disconnected;
+ int gone_away;
+ int stuck_status;
+ int status_queue_delay;
+ struct semaphore sw_lock;
+ struct usb_device *udev;
+ struct usb_interface *interface;
+ struct usb_class_driver *class;
+ struct work_struct status_work;
+ struct work_struct command_work;
+ struct work_struct respond_work;
+ struct u132_platform_data platform_data;
+ struct resource resources[0];
+ struct platform_device platform_dev;
+ unsigned char *bulk_in_buffer;
+ size_t bulk_in_size;
+ size_t bulk_in_last;
+ size_t bulk_in_left;
+ __u8 bulk_in_endpointAddr;
+ __u8 bulk_out_endpointAddr;
+ struct kref kref;
+ u32 controlreg;
+ u8 response[4 + 1024];
+ int expected;
+ int recieved;
+ int ed_found;
+};
+#define kref_to_usb_ftdi(d) container_of(d, struct usb_ftdi, kref)
+#define platform_device_to_usb_ftdi(d) container_of(d, struct usb_ftdi, \
+ platform_dev)
+static struct usb_driver ftdi_elan_driver;
+static void ftdi_elan_delete(struct kref *kref)
+{
+ struct usb_ftdi *ftdi = kref_to_usb_ftdi(kref);
+ dev_warn(&ftdi->udev->dev, "FREEING ftdi=%p\n", ftdi);
+ usb_put_dev(ftdi->udev);
+ ftdi->disconnected += 1;
+ down(&ftdi_module_lock);
+ list_del_init(&ftdi->ftdi_list);
+ ftdi_instances -= 1;
+ up(&ftdi_module_lock);
+ kfree(ftdi->bulk_in_buffer);
+ ftdi->bulk_in_buffer = NULL;
+}
+
+static void ftdi_elan_put_kref(struct usb_ftdi *ftdi)
+{
+ kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_elan_get_kref(struct usb_ftdi *ftdi)
+{
+ kref_get(&ftdi->kref);
+}
+
+static void ftdi_elan_init_kref(struct usb_ftdi *ftdi)
+{
+ kref_init(&ftdi->kref);
+}
+
+static void ftdi_status_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(status_queue, &ftdi->status_work, delta))
+ return;
+ } else if (queue_work(status_queue, &ftdi->status_work))
+ return;
+ kref_put(&ftdi->kref, ftdi_elan_delete);
+ return;
+}
+
+static void ftdi_status_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(status_queue, &ftdi->status_work, delta))
+ kref_get(&ftdi->kref);
+ } else if (queue_work(status_queue, &ftdi->status_work))
+ kref_get(&ftdi->kref);
+ return;
+}
+
+static void ftdi_status_cancel_work(struct usb_ftdi *ftdi)
+{
+ if (cancel_delayed_work(&ftdi->status_work))
+ kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_command_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(command_queue, &ftdi->command_work,
+ delta))
+ return;
+ } else if (queue_work(command_queue, &ftdi->command_work))
+ return;
+ kref_put(&ftdi->kref, ftdi_elan_delete);
+ return;
+}
+
+static void ftdi_command_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(command_queue, &ftdi->command_work,
+ delta))
+ kref_get(&ftdi->kref);
+ } else if (queue_work(command_queue, &ftdi->command_work))
+ kref_get(&ftdi->kref);
+ return;
+}
+
+static void ftdi_command_cancel_work(struct usb_ftdi *ftdi)
+{
+ if (cancel_delayed_work(&ftdi->command_work))
+ kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+static void ftdi_response_requeue_work(struct usb_ftdi *ftdi,
+ unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(respond_queue, &ftdi->respond_work,
+ delta))
+ return;
+ } else if (queue_work(respond_queue, &ftdi->respond_work))
+ return;
+ kref_put(&ftdi->kref, ftdi_elan_delete);
+ return;
+}
+
+static void ftdi_respond_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
+{
+ if (delta > 0) {
+ if (queue_delayed_work(respond_queue, &ftdi->respond_work,
+ delta))
+ kref_get(&ftdi->kref);
+ } else if (queue_work(respond_queue, &ftdi->respond_work))
+ kref_get(&ftdi->kref);
+ return;
+}
+
+static void ftdi_response_cancel_work(struct usb_ftdi *ftdi)
+{
+ if (cancel_delayed_work(&ftdi->respond_work))
+ kref_put(&ftdi->kref, ftdi_elan_delete);
+}
+
+void ftdi_elan_gone_away(struct platform_device *pdev)
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ ftdi->gone_away += 1;
+ ftdi_elan_put_kref(ftdi);
+}
+
+
+EXPORT_SYMBOL_GPL(ftdi_elan_gone_away);
+void ftdi_release_platform_dev(struct device *dev)
+{
+ dev->parent = NULL;
+}
+
+static void ftdi_elan_do_callback(struct usb_ftdi *ftdi,
+ struct u132_target *target, u8 *buffer, int length);
+static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi);
+static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi);
+static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi);
+static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi);
+static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi);
+static int ftdi_elan_synchronize(struct usb_ftdi *ftdi);
+static int ftdi_elan_stuck_waiting(struct usb_ftdi *ftdi);
+static int ftdi_elan_command_engine(struct usb_ftdi *ftdi);
+static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi);
+static int ftdi_elan_hcd_init(struct usb_ftdi *ftdi)
+{
+ int result;
+ if (ftdi->platform_dev.dev.parent)
+ return -EBUSY;
+ ftdi_elan_get_kref(ftdi);
+ ftdi->platform_data.potpg = 100;
+ ftdi->platform_data.reset = NULL;
+ ftdi->platform_dev.id = ftdi->sequence_num;
+ ftdi->platform_dev.resource = ftdi->resources;
+ ftdi->platform_dev.num_resources = ARRAY_SIZE(ftdi->resources);
+ ftdi->platform_dev.dev.platform_data = &ftdi->platform_data;
+ ftdi->platform_dev.dev.parent = NULL;
+ ftdi->platform_dev.dev.release = ftdi_release_platform_dev;
+ ftdi->platform_dev.dev.dma_mask = NULL;
+ snprintf(ftdi->device_name, sizeof(ftdi->device_name), "u132_hcd");
+ ftdi->platform_dev.name = ftdi->device_name;
+ dev_info(&ftdi->udev->dev, "requesting module '%s'\n", "u132_hcd");
+ request_module("u132_hcd");
+ dev_info(&ftdi->udev->dev, "registering '%s'\n",
+ ftdi->platform_dev.name);
+ result = platform_device_register(&ftdi->platform_dev);
+ return result;
+}
+
+static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi)
+{
+ down(&ftdi->u132_lock);
+ while (ftdi->respond_next > ftdi->respond_head) {
+ struct u132_respond *respond = &ftdi->respond[RESPOND_MASK &
+ ftdi->respond_head++];
+ *respond->result = -ESHUTDOWN;
+ *respond->value = 0;
+ complete(&respond->wait_completion);
+ } up(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi)
+{
+ int ed_number = 4;
+ down(&ftdi->u132_lock);
+ while (ed_number-- > 0) {
+ struct u132_target *target = &ftdi->target[ed_number];
+ if (target->active == 1) {
+ target->condition_code = TD_DEVNOTRESP;
+ up(&ftdi->u132_lock);
+ ftdi_elan_do_callback(ftdi, target, NULL, 0);
+ down(&ftdi->u132_lock);
+ }
+ }
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ up(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
+{
+ int ed_number = 4;
+ down(&ftdi->u132_lock);
+ while (ed_number-- > 0) {
+ struct u132_target *target = &ftdi->target[ed_number];
+ target->abandoning = 1;
+ wait_1:if (target->active == 1) {
+ int command_size = ftdi->command_next -
+ ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x80 | (ed_number << 5) | 0x4;
+ command->length = 0x00;
+ command->address = 0x00;
+ command->width = 0x00;
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = &command->value;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ down(&ftdi->u132_lock);
+ goto wait_1;
+ }
+ }
+ wait_2:if (target->active == 1) {
+ int command_size = ftdi->command_next -
+ ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x90 | (ed_number << 5);
+ command->length = 0x00;
+ command->address = 0x00;
+ command->width = 0x00;
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = &command->value;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ down(&ftdi->u132_lock);
+ goto wait_2;
+ }
+ }
+ }
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ up(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi)
+{
+ int ed_number = 4;
+ down(&ftdi->u132_lock);
+ while (ed_number-- > 0) {
+ struct u132_target *target = &ftdi->target[ed_number];
+ target->abandoning = 1;
+ wait:if (target->active == 1) {
+ int command_size = ftdi->command_next -
+ ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x80 | (ed_number << 5) | 0x4;
+ command->length = 0x00;
+ command->address = 0x00;
+ command->width = 0x00;
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = &command->value;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ down(&ftdi->u132_lock);
+ goto wait;
+ }
+ }
+ }
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ up(&ftdi->u132_lock);
+}
+
+static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi)
+{
+ ftdi_command_queue_work(ftdi, 0);
+ return;
+}
+
+static void ftdi_elan_command_work(void *data)
+{
+ struct usb_ftdi *ftdi = data;
+ if (ftdi->disconnected > 0) {
+ ftdi_elan_put_kref(ftdi);
+ return;
+ } else {
+ int retval = ftdi_elan_command_engine(ftdi);
+ if (retval == -ESHUTDOWN) {
+ ftdi->disconnected += 1;
+ } else if (retval == -ENODEV) {
+ ftdi->disconnected += 1;
+ } else if (retval)
+ dev_err(&ftdi->udev->dev, "command error %d\n", retval);
+ ftdi_command_requeue_work(ftdi, msecs_to_jiffies(10));
+ return;
+ }
+}
+
+static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi)
+{
+ ftdi_respond_queue_work(ftdi, 0);
+ return;
+}
+
+static void ftdi_elan_respond_work(void *data)
+{
+ struct usb_ftdi *ftdi = data;
+ if (ftdi->disconnected > 0) {
+ ftdi_elan_put_kref(ftdi);
+ return;
+ } else {
+ int retval = ftdi_elan_respond_engine(ftdi);
+ if (retval == 0) {
+ } else if (retval == -ESHUTDOWN) {
+ ftdi->disconnected += 1;
+ } else if (retval == -ENODEV) {
+ ftdi->disconnected += 1;
+ } else if (retval == -ENODEV) {
+ ftdi->disconnected += 1;
+ } else if (retval == -EILSEQ) {
+ ftdi->disconnected += 1;
+ } else {
+ ftdi->disconnected += 1;
+ dev_err(&ftdi->udev->dev, "respond error %d\n", retval);
+ }
+ if (ftdi->disconnected > 0) {
+ ftdi_elan_abandon_completions(ftdi);
+ ftdi_elan_abandon_targets(ftdi);
+ }
+ ftdi_response_requeue_work(ftdi, msecs_to_jiffies(10));
+ return;
+ }
+}
+
+
+/*
+* the sw_lock is initially held and will be freed
+* after the FTDI has been synchronized
+*
+*/
+static void ftdi_elan_status_work(void *data)
+{
+ struct usb_ftdi *ftdi = data;
+ int work_delay_in_msec = 0;
+ if (ftdi->disconnected > 0) {
+ ftdi_elan_put_kref(ftdi);
+ return;
+ } else if (ftdi->synchronized == 0) {
+ down(&ftdi->sw_lock);
+ if (ftdi_elan_synchronize(ftdi) == 0) {
+ ftdi->synchronized = 1;
+ ftdi_command_queue_work(ftdi, 1);
+ ftdi_respond_queue_work(ftdi, 1);
+ up(&ftdi->sw_lock);
+ work_delay_in_msec = 100;
+ } else {
+ dev_err(&ftdi->udev->dev, "synchronize failed\n");
+ up(&ftdi->sw_lock);
+ work_delay_in_msec = 10 *1000;
+ }
+ } else if (ftdi->stuck_status > 0) {
+ if (ftdi_elan_stuck_waiting(ftdi) == 0) {
+ ftdi->stuck_status = 0;
+ ftdi->synchronized = 0;
+ } else if ((ftdi->stuck_status++ % 60) == 1) {
+ dev_err(&ftdi->udev->dev, "WRONG type of card inserted "
+ "- please remove\n");
+ } else
+ dev_err(&ftdi->udev->dev, "WRONG type of card inserted "
+ "- checked %d times\n", ftdi->stuck_status);
+ work_delay_in_msec = 100;
+ } else if (ftdi->enumerated == 0) {
+ if (ftdi_elan_enumeratePCI(ftdi) == 0) {
+ ftdi->enumerated = 1;
+ work_delay_in_msec = 250;
+ } else
+ work_delay_in_msec = 1000;
+ } else if (ftdi->initialized == 0) {
+ if (ftdi_elan_setupOHCI(ftdi) == 0) {
+ ftdi->initialized = 1;
+ work_delay_in_msec = 500;
+ } else {
+ dev_err(&ftdi->udev->dev, "initialized failed - trying "
+ "again in 10 seconds\n");
+ work_delay_in_msec = 10 *1000;
+ }
+ } else if (ftdi->registered == 0) {
+ work_delay_in_msec = 10;
+ if (ftdi_elan_hcd_init(ftdi) == 0) {
+ ftdi->registered = 1;
+ } else
+ dev_err(&ftdi->udev->dev, "register failed\n");
+ work_delay_in_msec = 250;
+ } else {
+ if (ftdi_elan_checkingPCI(ftdi) == 0) {
+ work_delay_in_msec = 250;
+ } else if (ftdi->controlreg & 0x00400000) {
+ if (ftdi->gone_away > 0) {
+ dev_err(&ftdi->udev->dev, "PCI device eject con"
+ "firmed platform_dev.dev.parent=%p plat"
+ "form_dev.dev=%p\n",
+ ftdi->platform_dev.dev.parent,
+ &ftdi->platform_dev.dev);
+ platform_device_unregister(&ftdi->platform_dev);
+ ftdi->platform_dev.dev.parent = NULL;
+ ftdi->registered = 0;
+ ftdi->enumerated = 0;
+ ftdi->card_ejected = 0;
+ ftdi->initialized = 0;
+ ftdi->gone_away = 0;
+ } else
+ ftdi_elan_flush_targets(ftdi);
+ work_delay_in_msec = 250;
+ } else {
+ dev_err(&ftdi->udev->dev, "PCI device has disappeared\n"
+ );
+ ftdi_elan_cancel_targets(ftdi);
+ work_delay_in_msec = 500;
+ ftdi->enumerated = 0;
+ ftdi->initialized = 0;
+ }
+ }
+ if (ftdi->disconnected > 0) {
+ ftdi_elan_put_kref(ftdi);
+ return;
+ } else {
+ ftdi_status_requeue_work(ftdi,
+ msecs_to_jiffies(work_delay_in_msec));
+ return;
+ }
+}
+
+
+/*
+* file_operations for the jtag interface
+*
+* the usage count for the device is incremented on open()
+* and decremented on release()
+*/
+static int ftdi_elan_open(struct inode *inode, struct file *file)
+{
+ int subminor = iminor(inode);
+ struct usb_interface *interface = usb_find_interface(&ftdi_elan_driver,
+ subminor);
+ if (!interface) {
+ printk(KERN_ERR "can't find device for minor %d\n", subminor);
+ return -ENODEV;
+ } else {
+ struct usb_ftdi *ftdi = usb_get_intfdata(interface);
+ if (!ftdi) {
+ return -ENODEV;
+ } else {
+ if (down_interruptible(&ftdi->sw_lock)) {
+ return -EINTR;
+ } else {
+ ftdi_elan_get_kref(ftdi);
+ file->private_data = ftdi;
+ return 0;
+ }
+ }
+ }
+}
+
+static int ftdi_elan_release(struct inode *inode, struct file *file)
+{
+ struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+ if (ftdi == NULL)
+ return -ENODEV;
+ up(&ftdi->sw_lock); /* decrement the count on our device */
+ ftdi_elan_put_kref(ftdi);
+ return 0;
+}
+
+
+#define FTDI_ELAN_IOC_MAGIC 0xA1
+#define FTDI_ELAN_IOCDEBUG _IOC(_IOC_WRITE, FTDI_ELAN_IOC_MAGIC, 1, 132)
+static int ftdi_elan_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case FTDI_ELAN_IOCDEBUG:{
+ char line[132];
+ int size = strncpy_from_user(line,
+ (const char __user *)arg, sizeof(line));
+ if (size < 0) {
+ return -EINVAL;
+ } else {
+ printk(KERN_ERR "TODO: ioctl %s\n", line);
+ return 0;
+ }
+ }
+ default:
+ return -EFAULT;
+ }
+}
+
+
+/*
+*
+* blocking bulk reads are used to get data from the device
+*
+*/
+static ssize_t ftdi_elan_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ char data[30 *3 + 4];
+ char *d = data;
+ int m = (sizeof(data) - 1) / 3;
+ int bytes_read = 0;
+ int retry_on_empty = 10;
+ int retry_on_timeout = 5;
+ struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+ if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ }
+ data[0] = 0;
+ have:if (ftdi->bulk_in_left > 0) {
+ if (count-- > 0) {
+ char *p = ++ftdi->bulk_in_last + ftdi->bulk_in_buffer;
+ ftdi->bulk_in_left -= 1;
+ if (bytes_read < m) {
+ d += sprintf(d, " %02X", 0x000000FF & *p);
+ } else if (bytes_read > m) {
+ } else
+ d += sprintf(d, " ..");
+ if (copy_to_user(buffer++, p, 1)) {
+ return -EFAULT;
+ } else {
+ bytes_read += 1;
+ goto have;
+ }
+ } else
+ return bytes_read;
+ }
+ more:if (count > 0) {
+ int packet_bytes = 0;
+ int retval = usb_bulk_msg(ftdi->udev,
+ usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+ ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+ &packet_bytes, msecs_to_jiffies(50));
+ if (packet_bytes > 2) {
+ ftdi->bulk_in_left = packet_bytes - 2;
+ ftdi->bulk_in_last = 1;
+ goto have;
+ } else if (retval == -ETIMEDOUT) {
+ if (retry_on_timeout-- > 0) {
+ goto more;
+ } else if (bytes_read > 0) {
+ return bytes_read;
+ } else
+ return retval;
+ } else if (retval == 0) {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else
+ return bytes_read;
+ } else
+ return retval;
+ } else
+ return bytes_read;
+}
+
+static void ftdi_elan_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_ftdi *ftdi = (struct usb_ftdi *)urb->context;
+ if (urb->status && !(urb->status == -ENOENT || urb->status ==
+ -ECONNRESET || urb->status == -ESHUTDOWN)) {
+ dev_err(&ftdi->udev->dev, "urb=%p write bulk status received: %"
+ "d\n", urb, urb->status);
+ }
+ usb_buffer_free(urb->dev, urb->transfer_buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+}
+
+static int fill_buffer_with_all_queued_commands(struct usb_ftdi *ftdi,
+ char *buf, int command_size, int total_size)
+{
+ int ed_commands = 0;
+ int b = 0;
+ int I = command_size;
+ int i = ftdi->command_head;
+ while (I-- > 0) {
+ struct u132_command *command = &ftdi->command[COMMAND_MASK &
+ i++];
+ int F = command->follows;
+ u8 *f = command->buffer;
+ if (command->header & 0x80) {
+ ed_commands |= 1 << (0x3 & (command->header >> 5));
+ }
+ buf[b++] = command->header;
+ buf[b++] = (command->length >> 0) & 0x00FF;
+ buf[b++] = (command->length >> 8) & 0x00FF;
+ buf[b++] = command->address;
+ buf[b++] = command->width;
+ while (F-- > 0) {
+ buf[b++] = *f++;
+ }
+ }
+ return ed_commands;
+}
+
+static int ftdi_elan_total_command_size(struct usb_ftdi *ftdi, int command_size)
+{
+ int total_size = 0;
+ int I = command_size;
+ int i = ftdi->command_head;
+ while (I-- > 0) {
+ struct u132_command *command = &ftdi->command[COMMAND_MASK &
+ i++];
+ total_size += 5 + command->follows;
+ } return total_size;
+}
+
+static int ftdi_elan_command_engine(struct usb_ftdi *ftdi)
+{
+ int retval;
+ char *buf;
+ int ed_commands;
+ int total_size;
+ struct urb *urb;
+ int command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size == 0)
+ return 0;
+ total_size = ftdi_elan_total_command_size(ftdi, command_size);
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ dev_err(&ftdi->udev->dev, "could not get a urb to write %d comm"
+ "ands totaling %d bytes to the Uxxx\n", command_size,
+ total_size);
+ return -ENOMEM;
+ }
+ buf = usb_buffer_alloc(ftdi->udev, total_size, GFP_KERNEL,
+ &urb->transfer_dma);
+ if (!buf) {
+ dev_err(&ftdi->udev->dev, "could not get a buffer to write %d c"
+ "ommands totaling %d bytes to the Uxxx\n", command_size,
+ total_size);
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+ ed_commands = fill_buffer_with_all_queued_commands(ftdi, buf,
+ command_size, total_size);
+ usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+ ftdi->bulk_out_endpointAddr), buf, total_size,
+ ftdi_elan_write_bulk_callback, ftdi);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ if (ed_commands) {
+ char diag[40 *3 + 4];
+ char *d = diag;
+ int m = total_size;
+ u8 *c = buf;
+ int s = (sizeof(diag) - 1) / 3;
+ diag[0] = 0;
+ while (s-- > 0 && m-- > 0) {
+ if (s > 0 || m == 0) {
+ d += sprintf(d, " %02X", *c++);
+ } else
+ d += sprintf(d, " ..");
+ }
+ }
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ if (retval) {
+ dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write "
+ "%d commands totaling %d bytes to the Uxxx\n", retval,
+ urb, command_size, total_size);
+ usb_buffer_free(ftdi->udev, total_size, buf, urb->transfer_dma);
+ usb_free_urb(urb);
+ return retval;
+ }
+ usb_free_urb(urb); /* release our reference to this urb,
+ the USB core will eventually free it entirely */
+ ftdi->command_head += command_size;
+ ftdi_elan_kick_respond_queue(ftdi);
+ return 0;
+}
+
+static void ftdi_elan_do_callback(struct usb_ftdi *ftdi,
+ struct u132_target *target, u8 *buffer, int length)
+{
+ struct urb *urb = target->urb;
+ int halted = target->halted;
+ int skipped = target->skipped;
+ int actual = target->actual;
+ int non_null = target->non_null;
+ int toggle_bits = target->toggle_bits;
+ int error_count = target->error_count;
+ int condition_code = target->condition_code;
+ int repeat_number = target->repeat_number;
+ void (*callback) (void *, struct urb *, u8 *, int, int, int, int, int,
+ int, int, int, int) = target->callback;
+ target->active -= 1;
+ target->callback = NULL;
+ (*callback) (target->endp, urb, buffer, length, toggle_bits,
+ error_count, condition_code, repeat_number, halted, skipped,
+ actual, non_null);
+}
+
+static char *have_ed_set_response(struct usb_ftdi *ftdi,
+ struct u132_target *target, u16 ed_length, int ed_number, int ed_type,
+ char *b)
+{
+ int payload = (ed_length >> 0) & 0x07FF;
+ down(&ftdi->u132_lock);
+ target->actual = 0;
+ target->non_null = (ed_length >> 15) & 0x0001;
+ target->repeat_number = (ed_length >> 11) & 0x000F;
+ if (ed_type == 0x02) {
+ if (payload == 0 || target->abandoning > 0) {
+ target->abandoning = 0;
+ up(&ftdi->u132_lock);
+ ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+ payload);
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ return ftdi->response;
+ } else {
+ ftdi->expected = 4 + payload;
+ ftdi->ed_found = 1;
+ up(&ftdi->u132_lock);
+ return b;
+ }
+ } else if (ed_type == 0x03) {
+ if (payload == 0 || target->abandoning > 0) {
+ target->abandoning = 0;
+ up(&ftdi->u132_lock);
+ ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+ payload);
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ return ftdi->response;
+ } else {
+ ftdi->expected = 4 + payload;
+ ftdi->ed_found = 1;
+ up(&ftdi->u132_lock);
+ return b;
+ }
+ } else if (ed_type == 0x01) {
+ target->abandoning = 0;
+ up(&ftdi->u132_lock);
+ ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+ payload);
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ return ftdi->response;
+ } else {
+ target->abandoning = 0;
+ up(&ftdi->u132_lock);
+ ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+ payload);
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ return ftdi->response;
+ }
+}
+
+static char *have_ed_get_response(struct usb_ftdi *ftdi,
+ struct u132_target *target, u16 ed_length, int ed_number, int ed_type,
+ char *b)
+{
+ down(&ftdi->u132_lock);
+ target->condition_code = TD_DEVNOTRESP;
+ target->actual = (ed_length >> 0) & 0x01FF;
+ target->non_null = (ed_length >> 15) & 0x0001;
+ target->repeat_number = (ed_length >> 11) & 0x000F;
+ up(&ftdi->u132_lock);
+ if (target->active)
+ ftdi_elan_do_callback(ftdi, target, NULL, 0);
+ target->abandoning = 0;
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ return ftdi->response;
+}
+
+
+/*
+* The engine tries to empty the FTDI fifo
+*
+* all responses found in the fifo data are dispatched thus
+* the response buffer can only ever hold a maximum sized
+* response from the Uxxx.
+*
+*/
+static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi)
+{
+ u8 *b = ftdi->response + ftdi->recieved;
+ int bytes_read = 0;
+ int retry_on_empty = 1;
+ int retry_on_timeout = 3;
+ int empty_packets = 0;
+ read:{
+ int packet_bytes = 0;
+ int retval = usb_bulk_msg(ftdi->udev,
+ usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+ ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+ &packet_bytes, msecs_to_jiffies(500));
+ char diag[30 *3 + 4];
+ char *d = diag;
+ int m = packet_bytes;
+ u8 *c = ftdi->bulk_in_buffer;
+ int s = (sizeof(diag) - 1) / 3;
+ diag[0] = 0;
+ while (s-- > 0 && m-- > 0) {
+ if (s > 0 || m == 0) {
+ d += sprintf(d, " %02X", *c++);
+ } else
+ d += sprintf(d, " ..");
+ }
+ if (packet_bytes > 2) {
+ ftdi->bulk_in_left = packet_bytes - 2;
+ ftdi->bulk_in_last = 1;
+ goto have;
+ } else if (retval == -ETIMEDOUT) {
+ if (retry_on_timeout-- > 0) {
+ dev_err(&ftdi->udev->dev, "TIMED OUT with packe"
+ "t_bytes = %d with total %d bytes%s\n",
+ packet_bytes, bytes_read, diag);
+ goto more;
+ } else if (bytes_read > 0) {
+ dev_err(&ftdi->udev->dev, "ONLY %d bytes%s\n",
+ bytes_read, diag);
+ return -ENOMEM;
+ } else {
+ dev_err(&ftdi->udev->dev, "TIMED OUT with packe"
+ "t_bytes = %d with total %d bytes%s\n",
+ packet_bytes, bytes_read, diag);
+ return -ENOMEM;
+ }
+ } else if (retval == -EILSEQ) {
+ dev_err(&ftdi->udev->dev, "error = %d with packet_bytes"
+ " = %d with total %d bytes%s\n", retval,
+ packet_bytes, bytes_read, diag);
+ return retval;
+ } else if (retval) {
+ dev_err(&ftdi->udev->dev, "error = %d with packet_bytes"
+ " = %d with total %d bytes%s\n", retval,
+ packet_bytes, bytes_read, diag);
+ return retval;
+ } else if (packet_bytes == 2) {
+ unsigned char s0 = ftdi->bulk_in_buffer[0];
+ unsigned char s1 = ftdi->bulk_in_buffer[1];
+ empty_packets += 1;
+ if (s0 == 0x31 && s1 == 0x60) {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else
+ return 0;
+ } else if (s0 == 0x31 && s1 == 0x00) {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else
+ return 0;
+ } else {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else
+ return 0;
+ }
+ } else if (packet_bytes == 1) {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else
+ return 0;
+ } else {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else
+ return 0;
+ }
+ }
+ more:{
+ goto read;
+ }
+ have:if (ftdi->bulk_in_left > 0) {
+ u8 c = ftdi->bulk_in_buffer[++ftdi->bulk_in_last];
+ bytes_read += 1;
+ ftdi->bulk_in_left -= 1;
+ if (ftdi->recieved == 0 && c == 0xFF) {
+ goto have;
+ } else
+ *b++ = c;
+ if (++ftdi->recieved < ftdi->expected) {
+ goto have;
+ } else if (ftdi->ed_found) {
+ int ed_number = (ftdi->response[0] >> 5) & 0x03;
+ u16 ed_length = (ftdi->response[2] << 8) |
+ ftdi->response[1];
+ struct u132_target *target = &ftdi->target[ed_number];
+ int payload = (ed_length >> 0) & 0x07FF;
+ char diag[30 *3 + 4];
+ char *d = diag;
+ int m = payload;
+ u8 *c = 4 + ftdi->response;
+ int s = (sizeof(diag) - 1) / 3;
+ diag[0] = 0;
+ while (s-- > 0 && m-- > 0) {
+ if (s > 0 || m == 0) {
+ d += sprintf(d, " %02X", *c++);
+ } else
+ d += sprintf(d, " ..");
+ }
+ ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
+ payload);
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ b = ftdi->response;
+ goto have;
+ } else if (ftdi->expected == 8) {
+ u8 buscmd;
+ int respond_head = ftdi->respond_head++;
+ struct u132_respond *respond = &ftdi->respond[
+ RESPOND_MASK & respond_head];
+ u32 data = ftdi->response[7];
+ data <<= 8;
+ data |= ftdi->response[6];
+ data <<= 8;
+ data |= ftdi->response[5];
+ data <<= 8;
+ data |= ftdi->response[4];
+ *respond->value = data;
+ *respond->result = 0;
+ complete(&respond->wait_completion);
+ ftdi->recieved = 0;
+ ftdi->expected = 4;
+ ftdi->ed_found = 0;
+ b = ftdi->response;
+ buscmd = (ftdi->response[0] >> 0) & 0x0F;
+ if (buscmd == 0x00) {
+ } else if (buscmd == 0x02) {
+ } else if (buscmd == 0x06) {
+ } else if (buscmd == 0x0A) {
+ } else
+ dev_err(&ftdi->udev->dev, "Uxxx unknown(%0X) va"
+ "lue = %08X\n", buscmd, data);
+ goto have;
+ } else {
+ if ((ftdi->response[0] & 0x80) == 0x00) {
+ ftdi->expected = 8;
+ goto have;
+ } else {
+ int ed_number = (ftdi->response[0] >> 5) & 0x03;
+ int ed_type = (ftdi->response[0] >> 0) & 0x03;
+ u16 ed_length = (ftdi->response[2] << 8) |
+ ftdi->response[1];
+ struct u132_target *target = &ftdi->target[
+ ed_number];
+ target->halted = (ftdi->response[0] >> 3) &
+ 0x01;
+ target->skipped = (ftdi->response[0] >> 2) &
+ 0x01;
+ target->toggle_bits = (ftdi->response[3] >> 6)
+ & 0x03;
+ target->error_count = (ftdi->response[3] >> 4)
+ & 0x03;
+ target->condition_code = (ftdi->response[
+ 3] >> 0) & 0x0F;
+ if ((ftdi->response[0] & 0x10) == 0x00) {
+ b = have_ed_set_response(ftdi, target,
+ ed_length, ed_number, ed_type,
+ b);
+ goto have;
+ } else {
+ b = have_ed_get_response(ftdi, target,
+ ed_length, ed_number, ed_type,
+ b);
+ goto have;
+ }
+ }
+ }
+ } else
+ goto more;
+}
+
+
+/*
+* create a urb, and a buffer for it, and copy the data to the urb
+*
+*/
+static ssize_t ftdi_elan_write(struct file *file,
+ const char __user *user_buffer, size_t count,
+ loff_t *ppos)
+{
+ int retval = 0;
+ struct urb *urb;
+ char *buf;
+ char data[30 *3 + 4];
+ char *d = data;
+ const char __user *s = user_buffer;
+ int m = (sizeof(data) - 1) / 3;
+ struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data;
+ if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ }
+ if (count == 0) {
+ goto exit;
+ }
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ retval = -ENOMEM;
+ goto error_1;
+ }
+ buf = usb_buffer_alloc(ftdi->udev, count, GFP_KERNEL,
+ &urb->transfer_dma);
+ if (!buf) {
+ retval = -ENOMEM;
+ goto error_2;
+ }
+ if (copy_from_user(buf, user_buffer, count)) {
+ retval = -EFAULT;
+ goto error_3;
+ }
+ usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+ ftdi->bulk_out_endpointAddr), buf, count,
+ ftdi_elan_write_bulk_callback, ftdi);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ if (retval) {
+ dev_err(&ftdi->udev->dev, "failed submitting write urb, error %"
+ "d\n", retval);
+ goto error_4;
+ }
+ usb_free_urb(urb);
+ exit:;
+ if (count > m) {
+ int I = m - 1;
+ while (I-- > 0) {
+ d += sprintf(d, " %02X", 0x000000FF & *s++);
+ }
+ d += sprintf(d, " ..");
+ } else {
+ int I = count;
+ while (I-- > 0) {
+ d += sprintf(d, " %02X", 0x000000FF & *s++);
+ }
+ }
+ return count;
+ error_4: error_3:usb_buffer_free(ftdi->udev, count, buf,
+ urb->transfer_dma);
+ error_2:usb_free_urb(urb);
+ error_1:return retval;
+}
+
+static struct file_operations ftdi_elan_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .ioctl = ftdi_elan_ioctl,
+ .read = ftdi_elan_read,
+ .write = ftdi_elan_write,
+ .open = ftdi_elan_open,
+ .release = ftdi_elan_release,
+};
+
+/*
+* usb class driver info in order to get a minor number from the usb core,
+* and to have the device registered with the driver core
+*/
+static struct usb_class_driver ftdi_elan_jtag_class = {
+ .name = "ftdi-%d-jtag",
+ .fops = &ftdi_elan_fops,
+ .minor_base = USB_FTDI_ELAN_MINOR_BASE,
+};
+
+/*
+* the following definitions are for the
+* ELAN FPGA state machgine processor that
+* lies on the other side of the FTDI chip
+*/
+#define cPCIu132rd 0x0
+#define cPCIu132wr 0x1
+#define cPCIiord 0x2
+#define cPCIiowr 0x3
+#define cPCImemrd 0x6
+#define cPCImemwr 0x7
+#define cPCIcfgrd 0xA
+#define cPCIcfgwr 0xB
+#define cPCInull 0xF
+#define cU132cmd_status 0x0
+#define cU132flash 0x1
+#define cPIDsetup 0x0
+#define cPIDout 0x1
+#define cPIDin 0x2
+#define cPIDinonce 0x3
+#define cCCnoerror 0x0
+#define cCCcrc 0x1
+#define cCCbitstuff 0x2
+#define cCCtoggle 0x3
+#define cCCstall 0x4
+#define cCCnoresp 0x5
+#define cCCbadpid1 0x6
+#define cCCbadpid2 0x7
+#define cCCdataoverrun 0x8
+#define cCCdataunderrun 0x9
+#define cCCbuffoverrun 0xC
+#define cCCbuffunderrun 0xD
+#define cCCnotaccessed 0xF
+static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data)
+{
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x00 | cPCIu132wr;
+ command->length = 0x04;
+ command->address = 0x00;
+ command->width = 0x00;
+ command->follows = 4;
+ command->value = data;
+ command->buffer = &command->value;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset,
+ u8 width, u32 data)
+{
+ u8 addressofs = config_offset / 4;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x00 | (cPCIcfgwr & 0x0F);
+ command->length = 0x04;
+ command->address = addressofs;
+ command->width = 0x00 | (width & 0x0F);
+ command->follows = 4;
+ command->value = data;
+ command->buffer = &command->value;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset,
+ u8 width, u32 data)
+{
+ u8 addressofs = mem_offset / 4;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x00 | (cPCImemwr & 0x0F);
+ command->length = 0x04;
+ command->address = addressofs;
+ command->width = 0x00 | (width & 0x0F);
+ command->follows = 4;
+ command->value = data;
+ command->buffer = &command->value;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset,
+ u8 width, u32 data)
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_write_pcimem(ftdi, mem_offset, width, data);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_write_pcimem);
+static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data)
+{
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ int respond_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ respond_size = ftdi->respond_next - ftdi->respond_head;
+ if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
+ {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ struct u132_respond *respond = &ftdi->respond[
+ RESPOND_MASK & ftdi->respond_next];
+ int result = -ENODEV;
+ respond->result = &result;
+ respond->header = command->header = 0x00 | cPCIu132rd;
+ command->length = 0x04;
+ respond->address = command->address = cU132cmd_status;
+ command->width = 0x00;
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = NULL;
+ respond->value = data;
+ init_completion(&respond->wait_completion);
+ ftdi->command_next += 1;
+ ftdi->respond_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ wait_for_completion(&respond->wait_completion);
+ return result;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data)
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_read_reg(ftdi, data);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_reg);
+static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset,
+ u8 width, u32 *data)
+{
+ u8 addressofs = config_offset / 4;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ int respond_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ respond_size = ftdi->respond_next - ftdi->respond_head;
+ if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
+ {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ struct u132_respond *respond = &ftdi->respond[
+ RESPOND_MASK & ftdi->respond_next];
+ int result = -ENODEV;
+ respond->result = &result;
+ respond->header = command->header = 0x00 | (cPCIcfgrd &
+ 0x0F);
+ command->length = 0x04;
+ respond->address = command->address = addressofs;
+ command->width = 0x00 | (width & 0x0F);
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = NULL;
+ respond->value = data;
+ init_completion(&respond->wait_completion);
+ ftdi->command_next += 1;
+ ftdi->respond_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ wait_for_completion(&respond->wait_completion);
+ return result;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset,
+ u8 width, u32 *data)
+{
+ u8 addressofs = mem_offset / 4;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ int respond_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ respond_size = ftdi->respond_next - ftdi->respond_head;
+ if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE)
+ {
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ struct u132_respond *respond = &ftdi->respond[
+ RESPOND_MASK & ftdi->respond_next];
+ int result = -ENODEV;
+ respond->result = &result;
+ respond->header = command->header = 0x00 | (cPCImemrd &
+ 0x0F);
+ command->length = 0x04;
+ respond->address = command->address = addressofs;
+ command->width = 0x00 | (width & 0x0F);
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = NULL;
+ respond->value = data;
+ init_completion(&respond->wait_completion);
+ ftdi->command_next += 1;
+ ftdi->respond_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ wait_for_completion(&respond->wait_completion);
+ return result;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset,
+ u8 width, u32 *data)
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ if (ftdi->initialized == 0) {
+ return -ENODEV;
+ } else
+ return ftdi_elan_read_pcimem(ftdi, mem_offset, width, data);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_pcimem);
+static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ u8 ed = ed_number - 1;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else if (ftdi->initialized == 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_target *target = &ftdi->target[ed];
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x80 | (ed << 5);
+ command->length = 0x8007;
+ command->address = (toggle_bits << 6) | (ep_number << 2)
+ | (address << 0);
+ command->width = usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe));
+ command->follows = 8;
+ command->value = 0;
+ command->buffer = urb->setup_packet;
+ target->callback = callback;
+ target->endp = endp;
+ target->urb = urb;
+ target->active = 1;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_edset_setup(ftdi, ed_number, endp, urb, address,
+ ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_setup);
+static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ u8 ed = ed_number - 1;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else if (ftdi->initialized == 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_target *target = &ftdi->target[ed];
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ int remaining_length = urb->transfer_buffer_length -
+ urb->actual_length;
+ command->header = 0x82 | (ed << 5);
+ if (remaining_length == 0) {
+ command->length = 0x0000;
+ } else if (remaining_length > 1024) {
+ command->length = 0x8000 | 1023;
+ } else
+ command->length = 0x8000 | (remaining_length -
+ 1);
+ command->address = (toggle_bits << 6) | (ep_number << 2)
+ | (address << 0);
+ command->width = usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe));
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = NULL;
+ target->callback = callback;
+ target->endp = endp;
+ target->urb = urb;
+ target->active = 1;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_edset_input(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_edset_input(ftdi, ed_number, endp, urb, address,
+ ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_input);
+static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ u8 ed = ed_number - 1;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else if (ftdi->initialized == 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_target *target = &ftdi->target[ed];
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x81 | (ed << 5);
+ command->length = 0x0000;
+ command->address = (toggle_bits << 6) | (ep_number << 2)
+ | (address << 0);
+ command->width = usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe));
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = NULL;
+ target->callback = callback;
+ target->endp = endp;
+ target->urb = urb;
+ target->active = 1;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_edset_empty(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_edset_empty(ftdi, ed_number, endp, urb, address,
+ ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_empty);
+static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ u8 ed = ed_number - 1;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else if (ftdi->initialized == 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ u8 *b;
+ u16 urb_size;
+ int i = 0;
+ char data[30 *3 + 4];
+ char *d = data;
+ int m = (sizeof(data) - 1) / 3;
+ int l = 0;
+ struct u132_target *target = &ftdi->target[ed];
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x81 | (ed << 5);
+ command->address = (toggle_bits << 6) | (ep_number << 2)
+ | (address << 0);
+ command->width = usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe));
+ command->follows = min(1024,
+ urb->transfer_buffer_length -
+ urb->actual_length);
+ command->value = 0;
+ command->buffer = urb->transfer_buffer +
+ urb->actual_length;
+ command->length = 0x8000 | (command->follows - 1);
+ b = command->buffer;
+ urb_size = command->follows;
+ data[0] = 0;
+ while (urb_size-- > 0) {
+ if (i > m) {
+ } else if (i++ < m) {
+ int w = sprintf(d, " %02X", *b++);
+ d += w;
+ l += w;
+ } else
+ d += sprintf(d, " ..");
+ }
+ target->callback = callback;
+ target->endp = endp;
+ target->urb = urb;
+ target->active = 1;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_edset_output(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_edset_output(ftdi, ed_number, endp, urb, address,
+ ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_output);
+static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ u8 ed = ed_number - 1;
+ wait:if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else if (ftdi->initialized == 0) {
+ return -ENODEV;
+ } else {
+ int command_size;
+ down(&ftdi->u132_lock);
+ command_size = ftdi->command_next - ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ int remaining_length = urb->transfer_buffer_length -
+ urb->actual_length;
+ struct u132_target *target = &ftdi->target[ed];
+ struct u132_command *command = &ftdi->command[
+ COMMAND_MASK & ftdi->command_next];
+ command->header = 0x83 | (ed << 5);
+ if (remaining_length == 0) {
+ command->length = 0x0000;
+ } else if (remaining_length > 1024) {
+ command->length = 0x8000 | 1023;
+ } else
+ command->length = 0x8000 | (remaining_length -
+ 1);
+ command->address = (toggle_bits << 6) | (ep_number << 2)
+ | (address << 0);
+ command->width = usb_maxpacket(urb->dev, urb->pipe,
+ usb_pipeout(urb->pipe));
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = NULL;
+ target->callback = callback;
+ target->endp = endp;
+ target->urb = urb;
+ target->active = 1;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ goto wait;
+ }
+ }
+}
+
+int usb_ftdi_elan_edset_single(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null))
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_edset_single(ftdi, ed_number, endp, urb, address,
+ ep_number, toggle_bits, callback);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_single);
+static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number,
+ void *endp)
+{
+ u8 ed = ed_number - 1;
+ if (ftdi->disconnected > 0) {
+ return -ENODEV;
+ } else if (ftdi->initialized == 0) {
+ return -ENODEV;
+ } else {
+ struct u132_target *target = &ftdi->target[ed];
+ down(&ftdi->u132_lock);
+ if (target->abandoning > 0) {
+ up(&ftdi->u132_lock);
+ return 0;
+ } else {
+ target->abandoning = 1;
+ wait_1:if (target->active == 1) {
+ int command_size = ftdi->command_next -
+ ftdi->command_head;
+ if (command_size < COMMAND_SIZE) {
+ struct u132_command *command =
+ &ftdi->command[COMMAND_MASK &
+ ftdi->command_next];
+ command->header = 0x80 | (ed << 5) |
+ 0x4;
+ command->length = 0x00;
+ command->address = 0x00;
+ command->width = 0x00;
+ command->follows = 0;
+ command->value = 0;
+ command->buffer = &command->value;
+ ftdi->command_next += 1;
+ ftdi_elan_kick_command_queue(ftdi);
+ } else {
+ up(&ftdi->u132_lock);
+ msleep(100);
+ down(&ftdi->u132_lock);
+ goto wait_1;
+ }
+ }
+ up(&ftdi->u132_lock);
+ return 0;
+ }
+ }
+}
+
+int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number,
+ void *endp)
+{
+ struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
+ return ftdi_elan_edset_flush(ftdi, ed_number, endp);
+}
+
+
+EXPORT_SYMBOL_GPL(usb_ftdi_elan_edset_flush);
+static int ftdi_elan_flush_input_fifo(struct usb_ftdi *ftdi)
+{
+ int retry_on_empty = 10;
+ int retry_on_timeout = 5;
+ int retry_on_status = 20;
+ more:{
+ int packet_bytes = 0;
+ int retval = usb_bulk_msg(ftdi->udev,
+ usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+ ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+ &packet_bytes, msecs_to_jiffies(100));
+ if (packet_bytes > 2) {
+ char diag[30 *3 + 4];
+ char *d = diag;
+ int m = (sizeof(diag) - 1) / 3;
+ char *b = ftdi->bulk_in_buffer;
+ int bytes_read = 0;
+ diag[0] = 0;
+ while (packet_bytes-- > 0) {
+ char c = *b++;
+ if (bytes_read < m) {
+ d += sprintf(d, " %02X",
+ 0x000000FF & c);
+ } else if (bytes_read > m) {
+ } else
+ d += sprintf(d, " ..");
+ bytes_read += 1;
+ continue;
+ }
+ goto more;
+ } else if (packet_bytes > 1) {
+ char s1 = ftdi->bulk_in_buffer[0];
+ char s2 = ftdi->bulk_in_buffer[1];
+ if (s1 == 0x31 && s2 == 0x60) {
+ return 0;
+ } else if (retry_on_status-- > 0) {
+ goto more;
+ } else {
+ dev_err(&ftdi->udev->dev, "STATUS ERROR retry l"
+ "imit reached\n");
+ return -EFAULT;
+ }
+ } else if (packet_bytes > 0) {
+ char b1 = ftdi->bulk_in_buffer[0];
+ dev_err(&ftdi->udev->dev, "only one byte flushed from F"
+ "TDI = %02X\n", b1);
+ if (retry_on_status-- > 0) {
+ goto more;
+ } else {
+ dev_err(&ftdi->udev->dev, "STATUS ERROR retry l"
+ "imit reached\n");
+ return -EFAULT;
+ }
+ } else if (retval == -ETIMEDOUT) {
+ if (retry_on_timeout-- > 0) {
+ goto more;
+ } else {
+ dev_err(&ftdi->udev->dev, "TIMED OUT retry limi"
+ "t reached\n");
+ return -ENOMEM;
+ }
+ } else if (retval == 0) {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else {
+ dev_err(&ftdi->udev->dev, "empty packet retry l"
+ "imit reached\n");
+ return -ENOMEM;
+ }
+ } else {
+ dev_err(&ftdi->udev->dev, "error = %d\n", retval);
+ return retval;
+ }
+ }
+ return -1;
+}
+
+
+/*
+* send the long flush sequence
+*
+*/
+static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi)
+{
+ int retval;
+ struct urb *urb;
+ char *buf;
+ int I = 257;
+ int i = 0;
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequ"
+ "ence\n");
+ return -ENOMEM;
+ }
+ buf = usb_buffer_alloc(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
+ if (!buf) {
+ dev_err(&ftdi->udev->dev, "could not get a buffer for flush seq"
+ "uence\n");
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+ while (I-- > 0)
+ buf[i++] = 0x55;
+ usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+ ftdi->bulk_out_endpointAddr), buf, i,
+ ftdi_elan_write_bulk_callback, ftdi);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ if (retval) {
+ dev_err(&ftdi->udev->dev, "failed to submit urb containing the "
+ "flush sequence\n");
+ usb_buffer_free(ftdi->udev, i, buf, urb->transfer_dma);
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+ usb_free_urb(urb);
+ return 0;
+}
+
+
+/*
+* send the reset sequence
+*
+*/
+static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi)
+{
+ int retval;
+ struct urb *urb;
+ char *buf;
+ int I = 4;
+ int i = 0;
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ dev_err(&ftdi->udev->dev, "could not get a urb for the reset se"
+ "quence\n");
+ return -ENOMEM;
+ }
+ buf = usb_buffer_alloc(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
+ if (!buf) {
+ dev_err(&ftdi->udev->dev, "could not get a buffer for the reset"
+ " sequence\n");
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+ buf[i++] = 0x55;
+ buf[i++] = 0xAA;
+ buf[i++] = 0x5A;
+ buf[i++] = 0xA5;
+ usb_fill_bulk_urb(urb, ftdi->udev, usb_sndbulkpipe(ftdi->udev,
+ ftdi->bulk_out_endpointAddr), buf, i,
+ ftdi_elan_write_bulk_callback, ftdi);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ retval = usb_submit_urb(urb, GFP_KERNEL);
+ if (retval) {
+ dev_err(&ftdi->udev->dev, "failed to submit urb containing the "
+ "reset sequence\n");
+ usb_buffer_free(ftdi->udev, i, buf, urb->transfer_dma);
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+ usb_free_urb(urb);
+ return 0;
+}
+
+static int ftdi_elan_synchronize(struct usb_ftdi *ftdi)
+{
+ int retval;
+ int long_stop = 10;
+ int retry_on_timeout = 5;
+ int retry_on_empty = 10;
+ int err_count = 0;
+ retval = ftdi_elan_flush_input_fifo(ftdi);
+ if (retval)
+ return retval;
+ ftdi->bulk_in_left = 0;
+ ftdi->bulk_in_last = -1;
+ while (long_stop-- > 0) {
+ int read_stop;
+ int read_stuck;
+ retval = ftdi_elan_synchronize_flush(ftdi);
+ if (retval)
+ return retval;
+ retval = ftdi_elan_flush_input_fifo(ftdi);
+ if (retval)
+ return retval;
+ reset:retval = ftdi_elan_synchronize_reset(ftdi);
+ if (retval)
+ return retval;
+ read_stop = 100;
+ read_stuck = 10;
+ read:{
+ int packet_bytes = 0;
+ retval = usb_bulk_msg(ftdi->udev,
+ usb_rcvbulkpipe(ftdi->udev,
+ ftdi->bulk_in_endpointAddr),
+ ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+ &packet_bytes, msecs_to_jiffies(500));
+ if (packet_bytes > 2) {
+ char diag[30 *3 + 4];
+ char *d = diag;
+ int m = (sizeof(diag) - 1) / 3;
+ char *b = ftdi->bulk_in_buffer;
+ int bytes_read = 0;
+ unsigned char c = 0;
+ diag[0] = 0;
+ while (packet_bytes-- > 0) {
+ c = *b++;
+ if (bytes_read < m) {
+ d += sprintf(d, " %02X", c);
+ } else if (bytes_read > m) {
+ } else
+ d += sprintf(d, " ..");
+ bytes_read += 1;
+ continue;
+ }
+ if (c == 0x7E) {
+ return 0;
+ } else {
+ if (c == 0x55) {
+ goto read;
+ } else if (read_stop-- > 0) {
+ goto read;
+ } else {
+ dev_err(&ftdi->udev->dev, "retr"
+ "y limit reached\n");
+ continue;
+ }
+ }
+ } else if (packet_bytes > 1) {
+ unsigned char s1 = ftdi->bulk_in_buffer[0];
+ unsigned char s2 = ftdi->bulk_in_buffer[1];
+ if (s1 == 0x31 && s2 == 0x00) {
+ if (read_stuck-- > 0) {
+ goto read;
+ } else
+ goto reset;
+ } else if (s1 == 0x31 && s2 == 0x60) {
+ if (read_stop-- > 0) {
+ goto read;
+ } else {
+ dev_err(&ftdi->udev->dev, "retr"
+ "y limit reached\n");
+ continue;
+ }
+ } else {
+ if (read_stop-- > 0) {
+ goto read;
+ } else {
+ dev_err(&ftdi->udev->dev, "retr"
+ "y limit reached\n");
+ continue;
+ }
+ }
+ } else if (packet_bytes > 0) {
+ if (read_stop-- > 0) {
+ goto read;
+ } else {
+ dev_err(&ftdi->udev->dev, "retry limit "
+ "reached\n");
+ continue;
+ }
+ } else if (retval == -ETIMEDOUT) {
+ if (retry_on_timeout-- > 0) {
+ goto read;
+ } else {
+ dev_err(&ftdi->udev->dev, "TIMED OUT re"
+ "try limit reached\n");
+ continue;
+ }
+ } else if (retval == 0) {
+ if (retry_on_empty-- > 0) {
+ goto read;
+ } else {
+ dev_err(&ftdi->udev->dev, "empty packet"
+ " retry limit reached\n");
+ continue;
+ }
+ } else {
+ err_count += 1;
+ dev_err(&ftdi->udev->dev, "error = %d\n",
+ retval);
+ if (read_stop-- > 0) {
+ goto read;
+ } else {
+ dev_err(&ftdi->udev->dev, "retry limit "
+ "reached\n");
+ continue;
+ }
+ }
+ }
+ }
+ dev_err(&ftdi->udev->dev, "failed to synchronize\n");
+ return -EFAULT;
+}
+
+static int ftdi_elan_stuck_waiting(struct usb_ftdi *ftdi)
+{
+ int retry_on_empty = 10;
+ int retry_on_timeout = 5;
+ int retry_on_status = 50;
+ more:{
+ int packet_bytes = 0;
+ int retval = usb_bulk_msg(ftdi->udev,
+ usb_rcvbulkpipe(ftdi->udev, ftdi->bulk_in_endpointAddr),
+ ftdi->bulk_in_buffer, ftdi->bulk_in_size,
+ &packet_bytes, msecs_to_jiffies(1000));
+ if (packet_bytes > 2) {
+ char diag[30 *3 + 4];
+ char *d = diag;
+ int m = (sizeof(diag) - 1) / 3;
+ char *b = ftdi->bulk_in_buffer;
+ int bytes_read = 0;
+ diag[0] = 0;
+ while (packet_bytes-- > 0) {
+ char c = *b++;
+ if (bytes_read < m) {
+ d += sprintf(d, " %02X",
+ 0x000000FF & c);
+ } else if (bytes_read > m) {
+ } else
+ d += sprintf(d, " ..");
+ bytes_read += 1;
+ continue;
+ }
+ goto more;
+ } else if (packet_bytes > 1) {
+ char s1 = ftdi->bulk_in_buffer[0];
+ char s2 = ftdi->bulk_in_buffer[1];
+ if (s1 == 0x31 && s2 == 0x60) {
+ return 0;
+ } else if (retry_on_status-- > 0) {
+ msleep(5);
+ goto more;
+ } else
+ return -EFAULT;
+ } else if (packet_bytes > 0) {
+ char b1 = ftdi->bulk_in_buffer[0];
+ dev_err(&ftdi->udev->dev, "only one byte flushed from F"
+ "TDI = %02X\n", b1);
+ if (retry_on_status-- > 0) {
+ msleep(5);
+ goto more;
+ } else {
+ dev_err(&ftdi->udev->dev, "STATUS ERROR retry l"
+ "imit reached\n");
+ return -EFAULT;
+ }
+ } else if (retval == -ETIMEDOUT) {
+ if (retry_on_timeout-- > 0) {
+ goto more;
+ } else {
+ dev_err(&ftdi->udev->dev, "TIMED OUT retry limi"
+ "t reached\n");
+ return -ENOMEM;
+ }
+ } else if (retval == 0) {
+ if (retry_on_empty-- > 0) {
+ goto more;
+ } else {
+ dev_err(&ftdi->udev->dev, "empty packet retry l"
+ "imit reached\n");
+ return -ENOMEM;
+ }
+ } else {
+ dev_err(&ftdi->udev->dev, "error = %d\n", retval);
+ return -ENOMEM;
+ }
+ }
+ return -1;
+}
+
+static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi)
+{
+ int UxxxStatus = ftdi_elan_read_reg(ftdi, &ftdi->controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ if (ftdi->controlreg & 0x00400000) {
+ if (ftdi->card_ejected) {
+ } else {
+ ftdi->card_ejected = 1;
+ dev_err(&ftdi->udev->dev, "CARD EJECTED - controlreg = "
+ "%08X\n", ftdi->controlreg);
+ }
+ return -ENODEV;
+ } else {
+ u8 fn = ftdi->function - 1;
+ int activePCIfn = fn << 8;
+ u32 pcidata;
+ u32 pciVID;
+ u32 pciPID;
+ int reg = 0;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ pciVID = pcidata & 0xFFFF;
+ pciPID = (pcidata >> 16) & 0xFFFF;
+ if (pciVID == ftdi->platform_data.vendor && pciPID ==
+ ftdi->platform_data.device) {
+ return 0;
+ } else {
+ dev_err(&ftdi->udev->dev, "vendor=%04X pciVID=%04X devi"
+ "ce=%04X pciPID=%04X\n",
+ ftdi->platform_data.vendor, pciVID,
+ ftdi->platform_data.device, pciPID);
+ return -ENODEV;
+ }
+ }
+}
+
+static int ftdi_elan_enumeratePCI(struct usb_ftdi *ftdi)
+{
+ u32 latence_timer;
+ u32 controlreg;
+ int UxxxStatus;
+ u32 pcidata;
+ int reg = 0;
+ int foundOHCI = 0;
+ u8 fn;
+ int activePCIfn = 0;
+ u32 pciVID = 0;
+ u32 pciPID = 0;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000000L);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(750);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x100);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x00000200L | 0x500);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020CL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020DL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(250);
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000020FL | 0x000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x800);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_reg(ftdi, &controlreg);
+ if (UxxxStatus)
+ return UxxxStatus;
+ msleep(1000);
+ for (fn = 0; (fn < 4) && (!foundOHCI); fn++) {
+ activePCIfn = fn << 8;
+ ftdi->function = fn + 1;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ pciVID = pcidata & 0xFFFF;
+ pciPID = (pcidata >> 16) & 0xFFFF;
+ if ((pciVID == 0x1045) && (pciPID == 0xc861)) {
+ foundOHCI = 1;
+ } else if ((pciVID == 0x1033) && (pciPID == 0x0035)) {
+ foundOHCI = 1;
+ } else if ((pciVID == 0x10b9) && (pciPID == 0x5237)) {
+ foundOHCI = 1;
+ } else if ((pciVID == 0x11c1) && (pciPID == 0x5802)) {
+ foundOHCI = 1;
+ } else if ((pciVID == 0x11AB) && (pciPID == 0x1FA6)) {
+ }
+ }
+ if (foundOHCI == 0) {
+ return -ENXIO;
+ }
+ ftdi->platform_data.vendor = pciVID;
+ ftdi->platform_data.device = pciPID;
+ UxxxStatus = ftdi_elan_write_reg(ftdi, 0x0000025FL | 0x2800);
+ if (UxxxStatus)
+ return UxxxStatus;
+ reg = 16;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0xFFFFFFFF);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0,
+ 0xF0000000);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ reg = 12;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &latence_timer);
+ if (UxxxStatus)
+ return UxxxStatus;
+ latence_timer &= 0xFFFF00FF;
+ latence_timer |= 0x00001600;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ latence_timer);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ reg = 4;
+ UxxxStatus = ftdi_elan_write_config(ftdi, activePCIfn | reg, 0x00,
+ 0x06);
+ if (UxxxStatus)
+ return UxxxStatus;
+ UxxxStatus = ftdi_elan_read_config(ftdi, activePCIfn | reg, 0,
+ &pcidata);
+ if (UxxxStatus)
+ return UxxxStatus;
+ return 0;
+}
+
+static int ftdi_elan_setupOHCI(struct usb_ftdi *ftdi)
+{
+ u32 pcidata;
+ int U132Status;
+ int reg;
+ int reset_repeat = 0;
+ do_reset:reg = 8;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x01);
+ if (U132Status)
+ return U132Status;
+ reset_check:{
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ if (pcidata & 1) {
+ msleep(500);
+ if (reset_repeat++ > 100) {
+ reset_repeat = 0;
+ goto do_reset;
+ } else
+ goto reset_check;
+ }
+ }
+ goto dump_regs;
+ msleep(500);
+ reg = 0x28;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x11000000);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x40;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x34;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x2edf2edf);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 4;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0xA0);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ msleep(250);
+ reg = 8;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x0e, 0x04);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x28;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 8;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x48;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x00001200);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x54;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x58;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x34;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x28002edf);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ msleep(100);
+ reg = 0x50;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10000);
+ if (U132Status)
+ return U132Status;
+ reg = 0x54;
+ power_check:U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ if (!(pcidata & 1)) {
+ msleep(500);
+ goto power_check;
+ }
+ msleep(3000);
+ reg = 0x54;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x58;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x54;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x54;
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x10);
+ if (U132Status)
+ return U132Status;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ msleep(750);
+ reg = 0x54;
+ if (0) {
+ U132Status = ftdi_elan_write_pcimem(ftdi, reg, 0x00, 0x02);
+ if (U132Status)
+ return U132Status;
+ }
+ if (0) {
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ }
+ reg = 0x54;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ reg = 0x58;
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ dump_regs:for (reg = 0; reg <= 0x54; reg += 4) {
+ U132Status = ftdi_elan_read_pcimem(ftdi, reg, 0, &pcidata);
+ if (U132Status)
+ return U132Status;
+ }
+ return 0;
+}
+
+
+/*
+* we use only the first bulk-in and bulk-out endpoints
+*/
+static int ftdi_elan_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ size_t buffer_size;
+ int i;
+ int retval = -ENOMEM;
+ struct usb_ftdi *ftdi = kmalloc(sizeof(struct usb_ftdi), GFP_KERNEL);
+ if (ftdi == NULL) {
+ printk(KERN_ERR "Out of memory\n");
+ return -ENOMEM;
+ }
+ memset(ftdi, 0x00, sizeof(struct usb_ftdi));
+ down(&ftdi_module_lock);
+ list_add_tail(&ftdi->ftdi_list, &ftdi_static_list);
+ ftdi->sequence_num = ++ftdi_instances;
+ up(&ftdi_module_lock);
+ ftdi_elan_init_kref(ftdi);
+ init_MUTEX(&ftdi->sw_lock);
+ ftdi->udev = usb_get_dev(interface_to_usbdev(interface));
+ ftdi->interface = interface;
+ init_MUTEX(&ftdi->u132_lock);
+ ftdi->expected = 4;
+ iface_desc = interface->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (!ftdi->bulk_in_endpointAddr &&
+ ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) && ((endpoint->bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK))
+ {
+ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ ftdi->bulk_in_size = buffer_size;
+ ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress;
+ ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!ftdi->bulk_in_buffer) {
+ dev_err(&ftdi->udev->dev, "Could not allocate b"
+ "ulk_in_buffer\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ }
+ if (!ftdi->bulk_out_endpointAddr &&
+ ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_OUT) && ((endpoint->bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK))
+ {
+ ftdi->bulk_out_endpointAddr =
+ endpoint->bEndpointAddress;
+ }
+ }
+ if (!(ftdi->bulk_in_endpointAddr && ftdi->bulk_out_endpointAddr)) {
+ dev_err(&ftdi->udev->dev, "Could not find both bulk-in and bulk"
+ "-out endpoints\n");
+ retval = -ENODEV;
+ goto error;
+ }
+ dev_info(&ftdi->udev->dev, "interface %d has I=%02X O=%02X\n",
+ iface_desc->desc.bInterfaceNumber, ftdi->bulk_in_endpointAddr,
+ ftdi->bulk_out_endpointAddr);
+ usb_set_intfdata(interface, ftdi);
+ if (iface_desc->desc.bInterfaceNumber == 0 &&
+ ftdi->bulk_in_endpointAddr == 0x81 &&
+ ftdi->bulk_out_endpointAddr == 0x02) {
+ retval = usb_register_dev(interface, &ftdi_elan_jtag_class);
+ if (retval) {
+ dev_err(&ftdi->udev->dev, "Not able to get a minor for "
+ "this device.\n");
+ usb_set_intfdata(interface, NULL);
+ retval = -ENOMEM;
+ goto error;
+ } else {
+ ftdi->class = &ftdi_elan_jtag_class;
+ dev_info(&ftdi->udev->dev, "USB FDTI=%p JTAG interface "
+ "%d now attached to ftdi%d\n", ftdi,
+ iface_desc->desc.bInterfaceNumber,
+ interface->minor);
+ return 0;
+ }
+ } else if (iface_desc->desc.bInterfaceNumber == 1 &&
+ ftdi->bulk_in_endpointAddr == 0x83 &&
+ ftdi->bulk_out_endpointAddr == 0x04) {
+ ftdi->class = NULL;
+ dev_info(&ftdi->udev->dev, "USB FDTI=%p ELAN interface %d now a"
+ "ctivated\n", ftdi, iface_desc->desc.bInterfaceNumber);
+ INIT_WORK(&ftdi->status_work, ftdi_elan_status_work,
+ (void *)ftdi);
+ INIT_WORK(&ftdi->command_work, ftdi_elan_command_work,
+ (void *)ftdi);
+ INIT_WORK(&ftdi->respond_work, ftdi_elan_respond_work,
+ (void *)ftdi);
+ ftdi_status_queue_work(ftdi, msecs_to_jiffies(3 *1000));
+ return 0;
+ } else {
+ dev_err(&ftdi->udev->dev,
+ "Could not find ELAN's U132 device\n");
+ retval = -ENODEV;
+ goto error;
+ }
+ error:if (ftdi) {
+ ftdi_elan_put_kref(ftdi);
+ }
+ return retval;
+}
+
+static void ftdi_elan_disconnect(struct usb_interface *interface)
+{
+ struct usb_ftdi *ftdi = usb_get_intfdata(interface);
+ ftdi->disconnected += 1;
+ if (ftdi->class) {
+ int minor = interface->minor;
+ struct usb_class_driver *class = ftdi->class;
+ usb_set_intfdata(interface, NULL);
+ usb_deregister_dev(interface, class);
+ dev_info(&ftdi->udev->dev, "USB FTDI U132 jtag interface on min"
+ "or %d now disconnected\n", minor);
+ } else {
+ ftdi_status_cancel_work(ftdi);
+ ftdi_command_cancel_work(ftdi);
+ ftdi_response_cancel_work(ftdi);
+ ftdi_elan_abandon_completions(ftdi);
+ ftdi_elan_abandon_targets(ftdi);
+ if (ftdi->registered) {
+ platform_device_unregister(&ftdi->platform_dev);
+ ftdi->synchronized = 0;
+ ftdi->enumerated = 0;
+ ftdi->registered = 0;
+ }
+ flush_workqueue(status_queue);
+ flush_workqueue(command_queue);
+ flush_workqueue(respond_queue);
+ ftdi->disconnected += 1;
+ usb_set_intfdata(interface, NULL);
+ dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller inter"
+ "face now disconnected\n");
+ }
+ ftdi_elan_put_kref(ftdi);
+}
+
+static struct usb_driver ftdi_elan_driver = {
+ .name = "ftdi-elan",
+ .probe = ftdi_elan_probe,
+ .disconnect = ftdi_elan_disconnect,
+ .id_table = ftdi_elan_table,
+};
+static int __init ftdi_elan_init(void)
+{
+ int result;
+ printk(KERN_INFO "driver %s built at %s on %s\n", ftdi_elan_driver.name,
+ __TIME__, __DATE__);
+ init_MUTEX(&ftdi_module_lock);
+ INIT_LIST_HEAD(&ftdi_static_list);
+ status_queue = create_singlethread_workqueue("ftdi-status-control");
+ command_queue = create_singlethread_workqueue("ftdi-command-engine");
+ respond_queue = create_singlethread_workqueue("ftdi-respond-engine");
+ result = usb_register(&ftdi_elan_driver);
+ if (result)
+ printk(KERN_ERR "usb_register failed. Error number %d\n",
+ result);
+ return result;
+}
+
+static void __exit ftdi_elan_exit(void)
+{
+ struct usb_ftdi *ftdi;
+ struct usb_ftdi *temp;
+ usb_deregister(&ftdi_elan_driver);
+ printk(KERN_INFO "ftdi_u132 driver deregistered\n");
+ list_for_each_entry_safe(ftdi, temp, &ftdi_static_list, ftdi_list) {
+ ftdi_status_cancel_work(ftdi);
+ ftdi_command_cancel_work(ftdi);
+ ftdi_response_cancel_work(ftdi);
+ } flush_workqueue(status_queue);
+ destroy_workqueue(status_queue);
+ status_queue = NULL;
+ flush_workqueue(command_queue);
+ destroy_workqueue(command_queue);
+ command_queue = NULL;
+ flush_workqueue(respond_queue);
+ destroy_workqueue(respond_queue);
+ respond_queue = NULL;
+}
+
+
+module_init(ftdi_elan_init);
+module_exit(ftdi_elan_exit);
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index fcd69c5..8e6e195 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -98,7 +98,7 @@
static void idmouse_disconnect(struct usb_interface *interface);
/* file operation pointers */
-static struct file_operations idmouse_fops = {
+static const struct file_operations idmouse_fops = {
.owner = THIS_MODULE,
.read = idmouse_read,
.open = idmouse_open,
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index f30ab1f..10b6403 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -589,7 +589,7 @@
}
/* file operations needed when we register this driver */
-static struct file_operations ld_usb_fops = {
+static const struct file_operations ld_usb_fops = {
.owner = THIS_MODULE,
.read = ld_usb_read,
.write = ld_usb_write,
@@ -657,15 +657,11 @@
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
- if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+ if (usb_endpoint_is_int_in(endpoint))
dev->interrupt_in_endpoint = endpoint;
- }
- if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+ if (usb_endpoint_is_int_out(endpoint))
dev->interrupt_out_endpoint = endpoint;
- }
}
if (dev->interrupt_in_endpoint == NULL) {
dev_err(&intf->dev, "Interrupt in endpoint not found\n");
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 7699d97..77c36e6 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -259,7 +259,7 @@
static DEFINE_MUTEX (disconnect_mutex);
/* file operations needed when we register this driver */
-static struct file_operations tower_fops = {
+static const struct file_operations tower_fops = {
.owner = THIS_MODULE,
.read = tower_read,
.write = tower_write,
diff --git a/drivers/usb/misc/phidget.c b/drivers/usb/misc/phidget.c
new file mode 100644
index 0000000..735ed33
--- /dev/null
+++ b/drivers/usb/misc/phidget.c
@@ -0,0 +1,43 @@
+/*
+ * USB Phidgets class
+ *
+ * Copyright (C) 2006 Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/device.h>
+
+struct class *phidget_class;
+
+static int __init init_phidget(void)
+{
+ phidget_class = class_create(THIS_MODULE, "phidget");
+
+ if (IS_ERR(phidget_class))
+ return PTR_ERR(phidget_class);
+
+ return 0;
+}
+
+static void __exit cleanup_phidget(void)
+{
+ class_destroy(phidget_class);
+}
+
+EXPORT_SYMBOL_GPL(phidget_class);
+
+module_init(init_phidget);
+module_exit(cleanup_phidget);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("Container module for phidget class");
+
diff --git a/drivers/usb/misc/phidget.h b/drivers/usb/misc/phidget.h
new file mode 100644
index 0000000..c401190
--- /dev/null
+++ b/drivers/usb/misc/phidget.h
@@ -0,0 +1,12 @@
+/*
+ * USB Phidgets class
+ *
+ * Copyright (C) 2006 Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+extern struct class *phidget_class;
diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
index bfbbbfb..9a8d137 100644
--- a/drivers/usb/misc/phidgetkit.c
+++ b/drivers/usb/misc/phidgetkit.c
@@ -20,6 +20,8 @@
#include <linux/module.h>
#include <linux/usb.h>
+#include "phidget.h"
+
#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
#define DRIVER_DESC "USB PhidgetInterfaceKit Driver"
@@ -57,11 +59,15 @@
ifkit(0, 8, 8, 1);
ifkit(0, 16, 16, 0);
+static unsigned long device_no;
+
struct interfacekit {
struct usb_device *udev;
struct usb_interface *intf;
struct driver_interfacekit *ifkit;
+ struct device *dev;
unsigned long outputs;
+ int dev_no;
u8 inputs[MAX_INTERFACES];
u16 sensors[MAX_INTERFACES];
u8 lcd_files_on;
@@ -180,21 +186,24 @@
}
#define set_lcd_line(number) \
-static ssize_t lcd_line_##number(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- struct usb_interface *intf = to_usb_interface(dev); \
- struct interfacekit *kit = usb_get_intfdata(intf); \
- change_string(kit, buf, number - 1); \
- return count; \
-} \
-static DEVICE_ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number);
+static ssize_t lcd_line_##number(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct interfacekit *kit = dev_get_drvdata(dev); \
+ change_string(kit, buf, number - 1); \
+ return count; \
+}
+
+#define lcd_line_attr(number) \
+ __ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number)
+
set_lcd_line(1);
set_lcd_line(2);
static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct usb_interface *intf = to_usb_interface(dev);
- struct interfacekit *kit = usb_get_intfdata(intf);
+ struct interfacekit *kit = dev_get_drvdata(dev);
int enabled;
unsigned char *buffer;
int retval = -ENOMEM;
@@ -226,23 +235,30 @@
kfree(buffer);
return retval;
}
-static DEVICE_ATTR(backlight, S_IWUGO, NULL, set_backlight);
+
+static struct device_attribute dev_lcd_line_attrs[] = {
+ lcd_line_attr(1),
+ lcd_line_attr(2),
+ __ATTR(backlight, S_IWUGO, NULL, set_backlight)
+};
static void remove_lcd_files(struct interfacekit *kit)
{
+ int i;
+
if (kit->lcd_files_on) {
dev_dbg(&kit->udev->dev, "Removing lcd files\n");
- device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_1);
- device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_2);
- device_remove_file(&kit->intf->dev, &dev_attr_backlight);
+
+ for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++)
+ device_remove_file(kit->dev, &dev_lcd_line_attrs[i]);
}
}
static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct usb_interface *intf = to_usb_interface(dev);
- struct interfacekit *kit = usb_get_intfdata(intf);
+ struct interfacekit *kit = dev_get_drvdata(dev);
int enable;
+ int i, rc;
if (kit->ifkit->has_lcd == 0)
return -ENODEV;
@@ -253,9 +269,12 @@
if (enable) {
if (!kit->lcd_files_on) {
dev_dbg(&kit->udev->dev, "Adding lcd files\n");
- device_create_file(&kit->intf->dev, &dev_attr_lcd_line_1);
- device_create_file(&kit->intf->dev, &dev_attr_lcd_line_2);
- device_create_file(&kit->intf->dev, &dev_attr_backlight);
+ for (i=0; i<ARRAY_SIZE(dev_lcd_line_attrs); i++) {
+ rc = device_create_file(kit->dev,
+ &dev_lcd_line_attrs[i]);
+ if (rc)
+ goto out;
+ }
kit->lcd_files_on = 1;
}
} else {
@@ -266,7 +285,13 @@
}
return count;
+out:
+ while (i-- > 0)
+ device_remove_file(kit->dev, &dev_lcd_line_attrs[i]);
+
+ return rc;
}
+
static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files);
static void interfacekit_irq(struct urb *urb, struct pt_regs *regs)
@@ -362,24 +387,24 @@
for (i=0; i<kit->ifkit->inputs; i++) {
if (test_and_clear_bit(i, &kit->input_events)) {
sprintf(sysfs_file, "input%d", i + 1);
- sysfs_notify(&kit->intf->dev.kobj, NULL, sysfs_file);
+ sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
}
}
for (i=0; i<kit->ifkit->sensors; i++) {
if (test_and_clear_bit(i, &kit->sensor_events)) {
sprintf(sysfs_file, "sensor%d", i + 1);
- sysfs_notify(&kit->intf->dev.kobj, NULL, sysfs_file);
+ sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
}
}
}
#define show_set_output(value) \
-static ssize_t set_output##value(struct device *dev, struct device_attribute *attr, const char *buf, \
- size_t count) \
+static ssize_t set_output##value(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
{ \
- struct usb_interface *intf = to_usb_interface(dev); \
- struct interfacekit *kit = usb_get_intfdata(intf); \
+ struct interfacekit *kit = dev_get_drvdata(dev); \
int enabled; \
int retval; \
\
@@ -391,15 +416,19 @@
return retval ? retval : count; \
} \
\
-static ssize_t show_output##value(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_output##value(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
{ \
- struct usb_interface *intf = to_usb_interface(dev); \
- struct interfacekit *kit = usb_get_intfdata(intf); \
+ struct interfacekit *kit = dev_get_drvdata(dev); \
\
return sprintf(buf, "%d\n", !!test_bit(value - 1, &kit->outputs));\
-} \
-static DEVICE_ATTR(output##value, S_IWUGO | S_IRUGO, \
- show_output##value, set_output##value);
+}
+
+#define output_attr(value) \
+ __ATTR(output##value, S_IWUGO | S_IRUGO, \
+ show_output##value, set_output##value)
+
show_set_output(1);
show_set_output(2);
show_set_output(3);
@@ -417,15 +446,24 @@
show_set_output(15);
show_set_output(16);
+static struct device_attribute dev_output_attrs[] = {
+ output_attr(1), output_attr(2), output_attr(3), output_attr(4),
+ output_attr(5), output_attr(6), output_attr(7), output_attr(8),
+ output_attr(9), output_attr(10), output_attr(11), output_attr(12),
+ output_attr(13), output_attr(14), output_attr(15), output_attr(16)
+};
+
#define show_input(value) \
-static ssize_t show_input##value(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_input##value(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
- struct usb_interface *intf = to_usb_interface(dev); \
- struct interfacekit *kit = usb_get_intfdata(intf); \
+ struct interfacekit *kit = dev_get_drvdata(dev); \
\
return sprintf(buf, "%d\n", (int)kit->inputs[value - 1]); \
-} \
-static DEVICE_ATTR(input##value, S_IRUGO, show_input##value, NULL);
+}
+
+#define input_attr(value) \
+ __ATTR(input##value, S_IRUGO, show_input##value, NULL)
show_input(1);
show_input(2);
@@ -444,15 +482,25 @@
show_input(15);
show_input(16);
+static struct device_attribute dev_input_attrs[] = {
+ input_attr(1), input_attr(2), input_attr(3), input_attr(4),
+ input_attr(5), input_attr(6), input_attr(7), input_attr(8),
+ input_attr(9), input_attr(10), input_attr(11), input_attr(12),
+ input_attr(13), input_attr(14), input_attr(15), input_attr(16)
+};
+
#define show_sensor(value) \
-static ssize_t show_sensor##value(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_sensor##value(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
{ \
- struct usb_interface *intf = to_usb_interface(dev); \
- struct interfacekit *kit = usb_get_intfdata(intf); \
+ struct interfacekit *kit = dev_get_drvdata(dev); \
\
return sprintf(buf, "%d\n", (int)kit->sensors[value - 1]); \
-} \
-static DEVICE_ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL);
+}
+
+#define sensor_attr(value) \
+ __ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL)
show_sensor(1);
show_sensor(2);
@@ -463,6 +511,11 @@
show_sensor(7);
show_sensor(8);
+static struct device_attribute dev_sensor_attrs[] = {
+ sensor_attr(1), sensor_attr(2), sensor_attr(3), sensor_attr(4),
+ sensor_attr(5), sensor_attr(6), sensor_attr(7), sensor_attr(8)
+};
+
static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
@@ -471,6 +524,7 @@
struct interfacekit *kit;
struct driver_interfacekit *ifkit;
int pipe, maxp, rc = -ENOMEM;
+ int bit, value, i;
ifkit = (struct driver_interfacekit *)id->driver_info;
if (!ifkit)
@@ -493,6 +547,7 @@
if (!kit)
goto out;
+ kit->dev_no = -1;
kit->ifkit = ifkit;
kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &kit->data_dma);
if (!kit->data)
@@ -513,85 +568,80 @@
usb_set_intfdata(intf, kit);
+ do {
+ bit = find_first_zero_bit(&device_no, sizeof(device_no));
+ value = test_and_set_bit(bit, &device_no);
+ } while(value);
+ kit->dev_no = bit;
+
+ kit->dev = device_create(phidget_class, &kit->udev->dev, 0,
+ "interfacekit%d", kit->dev_no);
+ if (IS_ERR(kit->dev)) {
+ rc = PTR_ERR(kit->dev);
+ kit->dev = NULL;
+ goto out;
+ }
+ dev_set_drvdata(kit->dev, kit);
+
if (usb_submit_urb(kit->irq, GFP_KERNEL)) {
rc = -EIO;
goto out;
}
- if (ifkit->outputs >= 4) {
- device_create_file(&intf->dev, &dev_attr_output1);
- device_create_file(&intf->dev, &dev_attr_output2);
- device_create_file(&intf->dev, &dev_attr_output3);
- device_create_file(&intf->dev, &dev_attr_output4);
- }
- if (ifkit->outputs >= 8) {
- device_create_file(&intf->dev, &dev_attr_output5);
- device_create_file(&intf->dev, &dev_attr_output6);
- device_create_file(&intf->dev, &dev_attr_output7);
- device_create_file(&intf->dev, &dev_attr_output8);
- }
- if (ifkit->outputs == 16) {
- device_create_file(&intf->dev, &dev_attr_output9);
- device_create_file(&intf->dev, &dev_attr_output10);
- device_create_file(&intf->dev, &dev_attr_output11);
- device_create_file(&intf->dev, &dev_attr_output12);
- device_create_file(&intf->dev, &dev_attr_output13);
- device_create_file(&intf->dev, &dev_attr_output14);
- device_create_file(&intf->dev, &dev_attr_output15);
- device_create_file(&intf->dev, &dev_attr_output16);
+ for (i=0; i<ifkit->outputs; i++ ) {
+ rc = device_create_file(kit->dev, &dev_output_attrs[i]);
+ if (rc)
+ goto out2;
}
- if (ifkit->inputs >= 4) {
- device_create_file(&intf->dev, &dev_attr_input1);
- device_create_file(&intf->dev, &dev_attr_input2);
- device_create_file(&intf->dev, &dev_attr_input3);
- device_create_file(&intf->dev, &dev_attr_input4);
- }
- if (ifkit->inputs >= 8) {
- device_create_file(&intf->dev, &dev_attr_input5);
- device_create_file(&intf->dev, &dev_attr_input6);
- device_create_file(&intf->dev, &dev_attr_input7);
- device_create_file(&intf->dev, &dev_attr_input8);
- }
- if (ifkit->inputs == 16) {
- device_create_file(&intf->dev, &dev_attr_input9);
- device_create_file(&intf->dev, &dev_attr_input10);
- device_create_file(&intf->dev, &dev_attr_input11);
- device_create_file(&intf->dev, &dev_attr_input12);
- device_create_file(&intf->dev, &dev_attr_input13);
- device_create_file(&intf->dev, &dev_attr_input14);
- device_create_file(&intf->dev, &dev_attr_input15);
- device_create_file(&intf->dev, &dev_attr_input16);
+ for (i=0; i<ifkit->inputs; i++ ) {
+ rc = device_create_file(kit->dev, &dev_input_attrs[i]);
+ if (rc)
+ goto out3;
}
- if (ifkit->sensors >= 4) {
- device_create_file(&intf->dev, &dev_attr_sensor1);
- device_create_file(&intf->dev, &dev_attr_sensor2);
- device_create_file(&intf->dev, &dev_attr_sensor3);
- device_create_file(&intf->dev, &dev_attr_sensor4);
+ for (i=0; i<ifkit->sensors; i++ ) {
+ rc = device_create_file(kit->dev, &dev_sensor_attrs[i]);
+ if (rc)
+ goto out4;
}
- if (ifkit->sensors >= 7) {
- device_create_file(&intf->dev, &dev_attr_sensor5);
- device_create_file(&intf->dev, &dev_attr_sensor6);
- device_create_file(&intf->dev, &dev_attr_sensor7);
- }
- if (ifkit->sensors == 8)
- device_create_file(&intf->dev, &dev_attr_sensor8);
- if (ifkit->has_lcd)
- device_create_file(&intf->dev, &dev_attr_lcd);
+ if (ifkit->has_lcd) {
+ rc = device_create_file(kit->dev, &dev_attr_lcd);
+ if (rc)
+ goto out4;
+
+ }
dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n",
ifkit->sensors, ifkit->inputs, ifkit->outputs);
return 0;
+out4:
+ while (i-- > 0)
+ device_remove_file(kit->dev, &dev_sensor_attrs[i]);
+
+ i = ifkit->inputs;
+out3:
+ while (i-- > 0)
+ device_remove_file(kit->dev, &dev_input_attrs[i]);
+
+ i = ifkit->outputs;
+out2:
+ while (i-- > 0)
+ device_remove_file(kit->dev, &dev_output_attrs[i]);
out:
if (kit) {
if (kit->irq)
usb_free_urb(kit->irq);
if (kit->data)
usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma);
+ if (kit->dev)
+ device_unregister(kit->dev);
+ if (kit->dev_no >= 0)
+ clear_bit(kit->dev_no, &device_no);
+
kfree(kit);
}
@@ -601,6 +651,7 @@
static void interfacekit_disconnect(struct usb_interface *interface)
{
struct interfacekit *kit;
+ int i;
kit = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
@@ -613,73 +664,28 @@
cancel_delayed_work(&kit->do_notify);
- if (kit->ifkit->outputs >= 4) {
- device_remove_file(&interface->dev, &dev_attr_output1);
- device_remove_file(&interface->dev, &dev_attr_output2);
- device_remove_file(&interface->dev, &dev_attr_output3);
- device_remove_file(&interface->dev, &dev_attr_output4);
- }
- if (kit->ifkit->outputs >= 8) {
- device_remove_file(&interface->dev, &dev_attr_output5);
- device_remove_file(&interface->dev, &dev_attr_output6);
- device_remove_file(&interface->dev, &dev_attr_output7);
- device_remove_file(&interface->dev, &dev_attr_output8);
- }
- if (kit->ifkit->outputs == 16) {
- device_remove_file(&interface->dev, &dev_attr_output9);
- device_remove_file(&interface->dev, &dev_attr_output10);
- device_remove_file(&interface->dev, &dev_attr_output11);
- device_remove_file(&interface->dev, &dev_attr_output12);
- device_remove_file(&interface->dev, &dev_attr_output13);
- device_remove_file(&interface->dev, &dev_attr_output14);
- device_remove_file(&interface->dev, &dev_attr_output15);
- device_remove_file(&interface->dev, &dev_attr_output16);
+ for (i=0; i<kit->ifkit->outputs; i++)
+ device_remove_file(kit->dev, &dev_output_attrs[i]);
+
+ for (i=0; i<kit->ifkit->inputs; i++)
+ device_remove_file(kit->dev, &dev_input_attrs[i]);
+
+ for (i=0; i<kit->ifkit->sensors; i++)
+ device_remove_file(kit->dev, &dev_sensor_attrs[i]);
+
+ if (kit->ifkit->has_lcd) {
+ device_remove_file(kit->dev, &dev_attr_lcd);
+ remove_lcd_files(kit);
}
- if (kit->ifkit->inputs >= 4) {
- device_remove_file(&interface->dev, &dev_attr_input1);
- device_remove_file(&interface->dev, &dev_attr_input2);
- device_remove_file(&interface->dev, &dev_attr_input3);
- device_remove_file(&interface->dev, &dev_attr_input4);
- }
- if (kit->ifkit->inputs >= 8) {
- device_remove_file(&interface->dev, &dev_attr_input5);
- device_remove_file(&interface->dev, &dev_attr_input6);
- device_remove_file(&interface->dev, &dev_attr_input7);
- device_remove_file(&interface->dev, &dev_attr_input8);
- }
- if (kit->ifkit->inputs == 16) {
- device_remove_file(&interface->dev, &dev_attr_input9);
- device_remove_file(&interface->dev, &dev_attr_input10);
- device_remove_file(&interface->dev, &dev_attr_input11);
- device_remove_file(&interface->dev, &dev_attr_input12);
- device_remove_file(&interface->dev, &dev_attr_input13);
- device_remove_file(&interface->dev, &dev_attr_input14);
- device_remove_file(&interface->dev, &dev_attr_input15);
- device_remove_file(&interface->dev, &dev_attr_input16);
- }
-
- if (kit->ifkit->sensors >= 4) {
- device_remove_file(&interface->dev, &dev_attr_sensor1);
- device_remove_file(&interface->dev, &dev_attr_sensor2);
- device_remove_file(&interface->dev, &dev_attr_sensor3);
- device_remove_file(&interface->dev, &dev_attr_sensor4);
- }
- if (kit->ifkit->sensors >= 7) {
- device_remove_file(&interface->dev, &dev_attr_sensor5);
- device_remove_file(&interface->dev, &dev_attr_sensor6);
- device_remove_file(&interface->dev, &dev_attr_sensor7);
- }
- if (kit->ifkit->sensors == 8)
- device_remove_file(&interface->dev, &dev_attr_sensor8);
-
- if (kit->ifkit->has_lcd)
- device_remove_file(&interface->dev, &dev_attr_lcd);
+ device_unregister(kit->dev);
dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n",
kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs);
usb_put_dev(kit->udev);
+ clear_bit(kit->dev_no, &device_no);
+
kfree(kit);
}
diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
new file mode 100644
index 0000000..6b59b62
--- /dev/null
+++ b/drivers/usb/misc/phidgetmotorcontrol.c
@@ -0,0 +1,466 @@
+/*
+ * USB Phidget MotorControl driver
+ *
+ * Copyright (C) 2006 Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "phidget.h"
+
+#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
+#define DRIVER_DESC "USB PhidgetMotorControl Driver"
+
+#define USB_VENDOR_ID_GLAB 0x06c2
+#define USB_DEVICE_ID_MOTORCONTROL 0x0058
+
+#define URB_INT_SIZE 8
+
+static unsigned long device_no;
+
+struct motorcontrol {
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ struct device *dev;
+ int dev_no;
+ u8 inputs[4];
+ s8 desired_speed[2];
+ s8 speed[2];
+ s16 _current[2];
+ s8 acceleration[2];
+ struct urb *irq;
+ unsigned char *data;
+ dma_addr_t data_dma;
+
+ struct work_struct do_notify;
+ unsigned long input_events;
+ unsigned long speed_events;
+ unsigned long exceed_events;
+};
+
+static struct usb_device_id id_table[] = {
+ { USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_MOTORCONTROL) },
+ {}
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int set_motor(struct motorcontrol *mc, int motor)
+{
+ u8 *buffer;
+ int speed, speed2, acceleration;
+ int retval;
+
+ buffer = kzalloc(8, GFP_KERNEL);
+ if (!buffer) {
+ dev_err(&mc->intf->dev, "%s - out of memory\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ acceleration = mc->acceleration[motor] * 10;
+ /* -127 <= speed <= 127 */
+ speed = (mc->desired_speed[motor] * 127) / 100;
+ /* -0x7300 <= speed2 <= 0x7300 */
+ speed2 = (mc->desired_speed[motor] * 230 * 128) / 100;
+
+ buffer[0] = motor;
+ buffer[1] = speed;
+ buffer[2] = acceleration >> 8;
+ buffer[3] = acceleration;
+ buffer[4] = speed2 >> 8;
+ buffer[5] = speed2;
+
+ retval = usb_control_msg(mc->udev,
+ usb_sndctrlpipe(mc->udev, 0),
+ 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000);
+
+ if (retval != 8)
+ dev_err(&mc->intf->dev, "usb_control_msg returned %d\n",
+ retval);
+ kfree(buffer);
+
+ return retval < 0 ? retval : 0;
+}
+
+static void motorcontrol_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct motorcontrol *mc = urb->context;
+ unsigned char *buffer = mc->data;
+ int i, level;
+ int status;
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ /* -EPIPE: should clear the halt */
+ default: /* error */
+ goto resubmit;
+ }
+
+ /* digital inputs */
+ for (i=0; i<4; i++) {
+ level = (buffer[0] >> i) & 1;
+ if (mc->inputs[i] != level) {
+ mc->inputs[i] = level;
+ set_bit(i, &mc->input_events);
+ }
+ }
+
+ /* motor speed */
+ if (buffer[2] == 0) {
+ for (i=0; i<2; i++) {
+ level = ((s8)buffer[4+i]) * 100 / 127;
+ if (mc->speed[i] != level) {
+ mc->speed[i] = level;
+ set_bit(i, &mc->speed_events);
+ }
+ }
+ } else {
+ int index = buffer[3] & 1;
+
+ level = ((s8)buffer[4] << 8) | buffer[5];
+ level = level * 100 / 29440;
+ if (mc->speed[index] != level) {
+ mc->speed[index] = level;
+ set_bit(index, &mc->speed_events);
+ }
+
+ level = ((s8)buffer[6] << 8) | buffer[7];
+ mc->_current[index] = level * 100 / 1572;
+ }
+
+ if (buffer[1] & 1)
+ set_bit(0, &mc->exceed_events);
+
+ if (buffer[1] & 2)
+ set_bit(1, &mc->exceed_events);
+
+ if (mc->input_events || mc->exceed_events || mc->speed_events)
+ schedule_work(&mc->do_notify);
+
+resubmit:
+ status = usb_submit_urb(urb, SLAB_ATOMIC);
+ if (status)
+ dev_err(&mc->intf->dev,
+ "can't resubmit intr, %s-%s/motorcontrol0, status %d",
+ mc->udev->bus->bus_name,
+ mc->udev->devpath, status);
+}
+
+static void do_notify(void *data)
+{
+ struct motorcontrol *mc = data;
+ int i;
+ char sysfs_file[8];
+
+ for (i=0; i<4; i++) {
+ if (test_and_clear_bit(i, &mc->input_events)) {
+ sprintf(sysfs_file, "input%d", i);
+ sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
+ }
+ }
+
+ for (i=0; i<2; i++) {
+ if (test_and_clear_bit(i, &mc->speed_events)) {
+ sprintf(sysfs_file, "speed%d", i);
+ sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
+ }
+ }
+
+ for (i=0; i<2; i++) {
+ if (test_and_clear_bit(i, &mc->exceed_events))
+ dev_warn(&mc->intf->dev,
+ "motor #%d exceeds 1.5 Amp current limit\n", i);
+ }
+}
+
+#define show_set_speed(value) \
+static ssize_t set_speed##value(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct motorcontrol *mc = dev_get_drvdata(dev); \
+ int speed; \
+ int retval; \
+ \
+ if (sscanf(buf, "%d", &speed) < 1) \
+ return -EINVAL; \
+ \
+ if (speed < -100 || speed > 100) \
+ return -EINVAL; \
+ \
+ mc->desired_speed[value] = speed; \
+ \
+ retval = set_motor(mc, value); \
+ \
+ return retval ? retval : count; \
+} \
+ \
+static ssize_t show_speed##value(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct motorcontrol *mc = dev_get_drvdata(dev); \
+ \
+ return sprintf(buf, "%d\n", mc->speed[value]); \
+}
+
+#define speed_attr(value) \
+ __ATTR(speed##value, S_IWUGO | S_IRUGO, \
+ show_speed##value, set_speed##value)
+
+show_set_speed(0);
+show_set_speed(1);
+
+#define show_set_acceleration(value) \
+static ssize_t set_acceleration##value(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct motorcontrol *mc = dev_get_drvdata(dev); \
+ int acceleration; \
+ int retval; \
+ \
+ if (sscanf(buf, "%d", &acceleration) < 1) \
+ return -EINVAL; \
+ \
+ if (acceleration < 0 || acceleration > 100) \
+ return -EINVAL; \
+ \
+ mc->acceleration[value] = acceleration; \
+ \
+ retval = set_motor(mc, value); \
+ \
+ return retval ? retval : count; \
+} \
+ \
+static ssize_t show_acceleration##value(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct motorcontrol *mc = dev_get_drvdata(dev); \
+ \
+ return sprintf(buf, "%d\n", mc->acceleration[value]); \
+}
+
+#define acceleration_attr(value) \
+ __ATTR(acceleration##value, S_IWUGO | S_IRUGO, \
+ show_acceleration##value, set_acceleration##value)
+
+show_set_acceleration(0);
+show_set_acceleration(1);
+
+#define show_current(value) \
+static ssize_t show_current##value(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct motorcontrol *mc = dev_get_drvdata(dev); \
+ \
+ return sprintf(buf, "%dmA\n", (int)mc->_current[value]); \
+}
+
+#define current_attr(value) \
+ __ATTR(current##value, S_IRUGO, show_current##value, NULL)
+
+show_current(0);
+show_current(1);
+
+#define show_input(value) \
+static ssize_t show_input##value(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct motorcontrol *mc = dev_get_drvdata(dev); \
+ \
+ return sprintf(buf, "%d\n", (int)mc->inputs[value]); \
+}
+
+#define input_attr(value) \
+ __ATTR(input##value, S_IRUGO, show_input##value, NULL)
+
+show_input(0);
+show_input(1);
+show_input(2);
+show_input(3);
+
+static struct device_attribute dev_attrs[] = {
+ input_attr(0),
+ input_attr(1),
+ input_attr(2),
+ input_attr(3),
+ speed_attr(0),
+ speed_attr(1),
+ acceleration_attr(0),
+ acceleration_attr(1),
+ current_attr(0),
+ current_attr(1)
+};
+
+static int motorcontrol_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct motorcontrol *mc;
+ int pipe, maxp, rc = -ENOMEM;
+ int bit, value, i;
+
+ interface = intf->cur_altsetting;
+ if (interface->desc.bNumEndpoints != 1)
+ return -ENODEV;
+
+ endpoint = &interface->endpoint[0].desc;
+ if (!(endpoint->bEndpointAddress & 0x80))
+ return -ENODEV;
+
+ /*
+ * bmAttributes
+ */
+ pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ mc = kzalloc(sizeof(*mc), GFP_KERNEL);
+ if (!mc)
+ goto out;
+
+ mc->dev_no = -1;
+ mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &mc->data_dma);
+ if (!mc->data)
+ goto out;
+
+ mc->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!mc->irq)
+ goto out;
+
+ mc->udev = usb_get_dev(dev);
+ mc->intf = intf;
+ mc->acceleration[0] = mc->acceleration[1] = 10;
+ INIT_WORK(&mc->do_notify, do_notify, mc);
+ usb_fill_int_urb(mc->irq, mc->udev, pipe, mc->data,
+ maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp,
+ motorcontrol_irq, mc, endpoint->bInterval);
+ mc->irq->transfer_dma = mc->data_dma;
+ mc->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_set_intfdata(intf, mc);
+
+ do {
+ bit = find_first_zero_bit(&device_no, sizeof(device_no));
+ value = test_and_set_bit(bit, &device_no);
+ } while(value);
+ mc->dev_no = bit;
+
+ mc->dev = device_create(phidget_class, &mc->udev->dev, 0,
+ "motorcontrol%d", mc->dev_no);
+ if (IS_ERR(mc->dev)) {
+ rc = PTR_ERR(mc->dev);
+ mc->dev = NULL;
+ goto out;
+ }
+
+ dev_set_drvdata(mc->dev, mc);
+
+ if (usb_submit_urb(mc->irq, GFP_KERNEL)) {
+ rc = -EIO;
+ goto out;
+ }
+
+ for (i=0; i<ARRAY_SIZE(dev_attrs); i++) {
+ rc = device_create_file(mc->dev, &dev_attrs[i]);
+ if (rc)
+ goto out2;
+ }
+
+ dev_info(&intf->dev, "USB PhidgetMotorControl attached\n");
+
+ return 0;
+out2:
+ while (i-- > 0)
+ device_remove_file(mc->dev, &dev_attrs[i]);
+out:
+ if (mc) {
+ if (mc->irq)
+ usb_free_urb(mc->irq);
+ if (mc->data)
+ usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma);
+ if (mc->dev)
+ device_unregister(mc->dev);
+ if (mc->dev_no >= 0)
+ clear_bit(mc->dev_no, &device_no);
+
+ kfree(mc);
+ }
+
+ return rc;
+}
+
+static void motorcontrol_disconnect(struct usb_interface *interface)
+{
+ struct motorcontrol *mc;
+ int i;
+
+ mc = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+ if (!mc)
+ return;
+
+ usb_kill_urb(mc->irq);
+ usb_free_urb(mc->irq);
+ usb_buffer_free(mc->udev, URB_INT_SIZE, mc->data, mc->data_dma);
+
+ cancel_delayed_work(&mc->do_notify);
+
+ for (i=0; i<ARRAY_SIZE(dev_attrs); i++)
+ device_remove_file(mc->dev, &dev_attrs[i]);
+
+ device_unregister(mc->dev);
+
+ usb_put_dev(mc->udev);
+ clear_bit(mc->dev_no, &device_no);
+ kfree(mc);
+
+ dev_info(&interface->dev, "USB PhidgetMotorControl detached\n");
+}
+
+static struct usb_driver motorcontrol_driver = {
+ .name = "phidgetmotorcontrol",
+ .probe = motorcontrol_probe,
+ .disconnect = motorcontrol_disconnect,
+ .id_table = id_table
+};
+
+static int __init motorcontrol_init(void)
+{
+ int retval = 0;
+
+ retval = usb_register(&motorcontrol_driver);
+ if (retval)
+ err("usb_register failed. Error number %d", retval);
+
+ return retval;
+}
+
+static void __exit motorcontrol_exit(void)
+{
+ usb_deregister(&motorcontrol_driver);
+}
+
+module_init(motorcontrol_init);
+module_exit(motorcontrol_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
index c0df79c9..7163f05 100644
--- a/drivers/usb/misc/phidgetservo.c
+++ b/drivers/usb/misc/phidgetservo.c
@@ -1,7 +1,7 @@
/*
* USB PhidgetServo driver 1.0
*
- * Copyright (C) 2004 Sean Young <sean@mess.org>
+ * Copyright (C) 2004, 2006 Sean Young <sean@mess.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,14 +15,6 @@
*
* CAUTION: Generally you should use 0 < degrees < 180 as anything else
* is probably beyond the range of your servo and may damage it.
- *
- * Jun 16, 2004: Sean Young <sean@mess.org>
- * - cleanups
- * - was using memory after kfree()
- * Aug 8, 2004: Sean Young <sean@mess.org>
- * - set the highest angle as high as the hardware allows, there are
- * some odd servos out there
- *
*/
#include <linux/kernel.h>
@@ -32,6 +24,8 @@
#include <linux/module.h>
#include <linux/usb.h>
+#include "phidget.h"
+
#define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
#define DRIVER_DESC "USB PhidgetServo Driver"
@@ -70,8 +64,12 @@
MODULE_DEVICE_TABLE(usb, id_table);
+static int unsigned long device_no;
+
struct phidget_servo {
struct usb_device *udev;
+ struct device *dev;
+ int dev_no;
ulong type;
int pulse[4];
int degrees[4];
@@ -203,16 +201,16 @@
}
#define show_set(value) \
-static ssize_t set_servo##value (struct device *dev, struct device_attribute *attr, \
+static ssize_t set_servo##value (struct device *dev, \
+ struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
int degrees, minutes, retval; \
- struct usb_interface *intf = to_usb_interface (dev); \
- struct phidget_servo *servo = usb_get_intfdata (intf); \
+ struct phidget_servo *servo = dev_get_drvdata(dev); \
\
minutes = 0; \
/* must at least convert degrees */ \
- if (sscanf (buf, "%d.%d", °rees, &minutes) < 1) { \
+ if (sscanf(buf, "%d.%d", °rees, &minutes) < 1) { \
return -EINVAL; \
} \
\
@@ -220,86 +218,127 @@
return -EINVAL; \
\
if (servo->type & SERVO_VERSION_30) \
- retval = change_position_v30 (servo, value, degrees, \
+ retval = change_position_v30(servo, value, degrees, \
minutes); \
else \
- retval = change_position_v20 (servo, value, degrees, \
+ retval = change_position_v20(servo, value, degrees, \
minutes); \
\
return retval < 0 ? retval : count; \
} \
\
-static ssize_t show_servo##value (struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_servo##value (struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
{ \
- struct usb_interface *intf = to_usb_interface (dev); \
- struct phidget_servo *servo = usb_get_intfdata (intf); \
+ struct phidget_servo *servo = dev_get_drvdata(dev); \
\
- return sprintf (buf, "%d.%02d\n", servo->degrees[value], \
+ return sprintf(buf, "%d.%02d\n", servo->degrees[value], \
servo->minutes[value]); \
-} \
-static DEVICE_ATTR(servo##value, S_IWUGO | S_IRUGO, \
- show_servo##value, set_servo##value);
+}
+#define servo_attr(value) \
+ __ATTR(servo##value, S_IWUGO | S_IRUGO, \
+ show_servo##value, set_servo##value)
show_set(0);
show_set(1);
show_set(2);
show_set(3);
+static struct device_attribute dev_attrs[] = {
+ servo_attr(0), servo_attr(1), servo_attr(2), servo_attr(3)
+};
+
static int
servo_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct phidget_servo *dev;
+ int bit, value, rc;
+ int servo_count, i;
dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto out;
}
dev->udev = usb_get_dev(udev);
dev->type = id->driver_info;
+ dev->dev_no = -1;
usb_set_intfdata(interface, dev);
- device_create_file(&interface->dev, &dev_attr_servo0);
- if (dev->type & SERVO_COUNT_QUAD) {
- device_create_file(&interface->dev, &dev_attr_servo1);
- device_create_file(&interface->dev, &dev_attr_servo2);
- device_create_file(&interface->dev, &dev_attr_servo3);
+ do {
+ bit = find_first_zero_bit(&device_no, sizeof(device_no));
+ value = test_and_set_bit(bit, &device_no);
+ } while (value);
+ dev->dev_no = bit;
+
+ dev->dev = device_create(phidget_class, &dev->udev->dev, 0,
+ "servo%d", dev->dev_no);
+ if (IS_ERR(dev->dev)) {
+ rc = PTR_ERR(dev->dev);
+ dev->dev = NULL;
+ goto out;
+ }
+
+ servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
+
+ for (i=0; i<servo_count; i++) {
+ rc = device_create_file(dev->dev, &dev_attrs[i]);
+ if (rc)
+ goto out2;
}
dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n",
- dev->type & SERVO_COUNT_QUAD ? 4 : 1,
- dev->type & SERVO_VERSION_30 ? 3 : 2);
+ servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
- if(!(dev->type & SERVO_VERSION_30))
+ if (!(dev->type & SERVO_VERSION_30))
dev_info(&interface->dev,
"WARNING: v2.0 not tested! Please report if it works.\n");
return 0;
+out2:
+ while (i-- > 0)
+ device_remove_file(dev->dev, &dev_attrs[i]);
+out:
+ if (dev) {
+ if (dev->dev)
+ device_unregister(dev->dev);
+ if (dev->dev_no >= 0)
+ clear_bit(dev->dev_no, &device_no);
+
+ kfree(dev);
+ }
+
+ return rc;
}
static void
servo_disconnect(struct usb_interface *interface)
{
struct phidget_servo *dev;
+ int servo_count, i;
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
- device_remove_file(&interface->dev, &dev_attr_servo0);
- if (dev->type & SERVO_COUNT_QUAD) {
- device_remove_file(&interface->dev, &dev_attr_servo1);
- device_remove_file(&interface->dev, &dev_attr_servo2);
- device_remove_file(&interface->dev, &dev_attr_servo3);
- }
+ if (!dev)
+ return;
+ servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
+
+ for (i=0; i<servo_count; i++)
+ device_remove_file(dev->dev, &dev_attrs[i]);
+
+ device_unregister(dev->dev);
usb_put_dev(dev->udev);
dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n",
- dev->type & SERVO_COUNT_QUAD ? 4 : 1,
- dev->type & SERVO_VERSION_30 ? 3 : 2);
+ servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2);
+ clear_bit(dev->dev_no, &device_no);
kfree(dev);
}
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index e16582f..a44124c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3179,7 +3179,7 @@
}
#endif
-static struct file_operations usb_sisusb_fops = {
+static const struct file_operations usb_sisusb_fops = {
.owner = THIS_MODULE,
.open = sisusb_open,
.release = sisusb_release,
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
new file mode 100644
index 0000000..551ba89
--- /dev/null
+++ b/drivers/usb/misc/usb_u132.h
@@ -0,0 +1,97 @@
+/*
+* Common Header File for the Elan Digital Systems U132 adapter
+* this file should be included by both the "ftdi-u132" and
+* the "u132-hcd" modules.
+*
+* Copyright(C) 2006 Elan Digital Systems Limited
+*(http://www.elandigitalsystems.com)
+*
+* Author and Maintainer - Tony Olech - Elan Digital Systems
+*(tony.olech@elandigitalsystems.com)
+*
+* This program is free software;you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation, version 2.
+*
+*
+* The driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
+* based on various USB client drivers in the 2.6.15 linux kernel
+* with constant reference to the 3rd Edition of Linux Device Drivers
+* published by O'Reilly
+*
+* The U132 adapter is a USB to CardBus adapter specifically designed
+* for PC cards that contain an OHCI host controller. Typical PC cards
+* are the Orange Mobile 3G Option GlobeTrotter Fusion card.
+*
+* The U132 adapter will *NOT *work with PC cards that do not contain
+* an OHCI controller. A simple way to test whether a PC card has an
+* OHCI controller as an interface is to insert the PC card directly
+* into a laptop(or desktop) with a CardBus slot and if "lspci" shows
+* a new USB controller and "lsusb -v" shows a new OHCI Host Controller
+* then there is a good chance that the U132 adapter will support the
+* PC card.(you also need the specific client driver for the PC card)
+*
+* Please inform the Author and Maintainer about any PC cards that
+* contain OHCI Host Controller and work when directly connected to
+* an embedded CardBus slot but do not work when they are connected
+* via an ELAN U132 adapter.
+*
+* The driver consists of two modules, the "ftdi-u132" module is
+* a USB client driver that interfaces to the FTDI chip within
+* the U132 adapter manufactured by Elan Digital Systems, and the
+* "u132-hcd" module is a USB host controller driver that talks
+* to the OHCI controller within CardBus card that are inserted
+* in the U132 adapter.
+*
+* The "ftdi-u132" module should be loaded automatically by the
+* hot plug system when the U132 adapter is plugged in. The module
+* initialises the adapter which mostly consists of synchronising
+* the FTDI chip, before continuously polling the adapter to detect
+* PC card insertions. As soon as a PC card containing a recognised
+* OHCI controller is seen the "ftdi-u132" module explicitly requests
+* the kernel to load the "u132-hcd" module.
+*
+* The "ftdi-u132" module provides the interface to the inserted
+* PC card and the "u132-hcd" module uses the API to send and recieve
+* data. The API features call-backs, so that part of the "u132-hcd"
+* module code will run in the context of one of the kernel threads
+* of the "ftdi-u132" module.
+*
+*/
+int ftdi_elan_switch_on_diagnostics(int number);
+void ftdi_elan_gone_away(struct platform_device *pdev);
+void start_usb_lock_device_tracing(void);
+struct u132_platform_data {
+ u16 vendor;
+ u16 device;
+ u8 potpg;
+ void (*port_power) (struct device *dev, int is_on);
+ void (*reset) (struct device *dev);
+};
+int usb_ftdi_elan_edset_single(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_output(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_empty(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_input(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number,
+ void *endp, struct urb *urb, u8 address, u8 ep_number, u8 toggle_bits,
+ void (*callback) (void *endp, struct urb *urb, u8 *buf, int len,
+ int toggle_bits, int error_count, int condition_code, int repeat_number,
+ int halted, int skipped, int actual, int non_null));
+int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number,
+ void *endp);
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index e095772..dbaca9f 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -239,7 +239,7 @@
return retval;
}
-static struct file_operations lcd_fops = {
+static const struct file_operations lcd_fops = {
.owner = THIS_MODULE,
.read = lcd_read,
.write = lcd_write,
@@ -290,9 +290,7 @@
endpoint = &iface_desc->endpoint[i].desc;
if (!dev->bulk_in_endpointAddr &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
+ usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
dev->bulk_in_size = buffer_size;
@@ -305,9 +303,7 @@
}
if (!dev->bulk_out_endpointAddr &&
- !(endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
+ usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
dev->bulk_out_endpointAddr = endpoint->bEndpointAddress;
}
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 0c5ee0a..49c5c5c 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -108,22 +108,34 @@
dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory\n");
- goto error;
+ goto error_mem;
}
dev->udev = usb_get_dev(udev);
usb_set_intfdata (interface, dev);
- device_create_file(&interface->dev, &dev_attr_blue);
- device_create_file(&interface->dev, &dev_attr_red);
- device_create_file(&interface->dev, &dev_attr_green);
+ retval = device_create_file(&interface->dev, &dev_attr_blue);
+ if (retval)
+ goto error;
+ retval = device_create_file(&interface->dev, &dev_attr_red);
+ if (retval)
+ goto error;
+ retval = device_create_file(&interface->dev, &dev_attr_green);
+ if (retval)
+ goto error;
dev_info(&interface->dev, "USB LED device now attached\n");
return 0;
error:
+ device_remove_file(&interface->dev, &dev_attr_blue);
+ device_remove_file(&interface->dev, &dev_attr_red);
+ device_remove_file(&interface->dev, &dev_attr_green);
+ usb_set_intfdata (interface, NULL);
+ usb_put_dev(dev->udev);
kfree(dev);
+error_mem:
return retval;
}
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index 275a66f..394bbf2 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -265,7 +265,6 @@
ubus->mon_bus = NULL;
mbus->u_bus = NULL;
mb();
- // usb_bus_put(ubus);
}
/*
@@ -297,12 +296,12 @@
INIT_LIST_HEAD(&mbus->r_list);
/*
- * This usb_bus_get here is superfluous, because we receive
- * a notification if usb_bus is about to be removed.
+ * We don't need to take a reference to ubus, because we receive
+ * a notification if the bus is about to be removed.
*/
- // usb_bus_get(ubus);
mbus->u_bus = ubus;
ubus->mon_bus = mbus;
+ mbus->uses_dma = ubus->uses_dma;
rc = snprintf(name, NAMESZ, "%dt", ubus->busnum);
if (rc <= 0 || rc >= NAMESZ)
diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c
index 1fe01d9..f6d1491 100644
--- a/drivers/usb/mon/mon_stat.c
+++ b/drivers/usb/mon/mon_stat.c
@@ -28,7 +28,7 @@
if ((sp = kmalloc(sizeof(struct snap), GFP_KERNEL)) == NULL)
return -ENOMEM;
- mbus = inode->u.generic_ip;
+ mbus = inode->i_private;
sp->slen = snprintf(sp->str, STAT_BUF_SIZE,
"nreaders %d events %u text_lost %u\n",
@@ -62,7 +62,7 @@
return 0;
}
-struct file_operations mon_fops_stat = {
+const struct file_operations mon_fops_stat = {
.owner = THIS_MODULE,
.open = mon_stat_open,
.llseek = no_llseek,
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index f961a77..7a2346c 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -75,13 +75,13 @@
*/
static inline char mon_text_get_setup(struct mon_event_text *ep,
- struct urb *urb, char ev_type)
+ struct urb *urb, char ev_type, struct mon_bus *mbus)
{
if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
return '-';
- if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)
+ if (mbus->uses_dma && (urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX);
if (urb->setup_packet == NULL)
return 'Z'; /* '0' would be not as pretty. */
@@ -91,7 +91,7 @@
}
static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
- int len, char ev_type)
+ int len, char ev_type, struct mon_bus *mbus)
{
int pipe = urb->pipe;
@@ -117,7 +117,7 @@
* contain non-NULL garbage in case the upper level promised to
* set DMA for the HCD.
*/
- if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)
+ if (mbus->uses_dma && (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
return mon_dmapeek(ep->data, urb->transfer_dma, len);
if (urb->transfer_buffer == NULL)
@@ -161,8 +161,9 @@
/* Collecting status makes debugging sense for submits, too */
ep->status = urb->status;
- ep->setup_flag = mon_text_get_setup(ep, urb, ev_type);
- ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type);
+ ep->setup_flag = mon_text_get_setup(ep, urb, ev_type, rp->r.m_bus);
+ ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type,
+ rp->r.m_bus);
rp->nevents++;
list_add_tail(&ep->e_link, &rp->e_list);
@@ -238,7 +239,7 @@
int rc;
mutex_lock(&mon_lock);
- mbus = inode->u.generic_ip;
+ mbus = inode->i_private;
ubus = mbus->u_bus;
rp = kzalloc(sizeof(struct mon_reader_text), GFP_KERNEL);
@@ -401,7 +402,7 @@
struct mon_event_text *ep;
mutex_lock(&mon_lock);
- mbus = inode->u.generic_ip;
+ mbus = inode->i_private;
if (mbus->nreaders <= 0) {
printk(KERN_ERR TAG ": consistency error on close\n");
@@ -435,7 +436,7 @@
return 0;
}
-struct file_operations mon_fops_text = {
+const struct file_operations mon_fops_text = {
.owner = THIS_MODULE,
.open = mon_text_open,
.llseek = no_llseek,
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
index 33678c2..ab9d02d 100644
--- a/drivers/usb/mon/usb_mon.h
+++ b/drivers/usb/mon/usb_mon.h
@@ -20,6 +20,7 @@
struct dentry *dent_s; /* Debugging file */
struct dentry *dent_t; /* Text interface file */
struct usb_bus *u_bus;
+ int uses_dma;
/* Ref */
int nreaders; /* Under mon_lock AND mbus->lock */
@@ -53,7 +54,7 @@
extern struct mutex mon_lock;
-extern struct file_operations mon_fops_text;
-extern struct file_operations mon_fops_stat;
+extern const struct file_operations mon_fops_text;
+extern const struct file_operations mon_fops_stat;
#endif /* __USB_MON_H */
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 2e2bbc00..9b97aa6 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -1,7 +1,8 @@
/*
* ASIX AX8817X based USB 2.0 Ethernet Devices
- * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
* Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
* Copyright (c) 2002-2003 TiVo Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -36,6 +37,9 @@
#include "usbnet.h"
+#define DRIVER_VERSION "14-Jun-2006"
+static const char driver_name [] = "asix";
+
/* ASIX AX8817X based USB 2.0 Ethernet Devices */
#define AX_CMD_SET_SW_MII 0x06
@@ -46,23 +50,25 @@
#define AX_CMD_WRITE_EEPROM 0x0c
#define AX_CMD_WRITE_ENABLE 0x0d
#define AX_CMD_WRITE_DISABLE 0x0e
+#define AX_CMD_READ_RX_CTL 0x0f
#define AX_CMD_WRITE_RX_CTL 0x10
#define AX_CMD_READ_IPG012 0x11
#define AX_CMD_WRITE_IPG0 0x12
#define AX_CMD_WRITE_IPG1 0x13
+#define AX_CMD_READ_NODE_ID 0x13
#define AX_CMD_WRITE_IPG2 0x14
#define AX_CMD_WRITE_MULTI_FILTER 0x16
-#define AX_CMD_READ_NODE_ID 0x17
+#define AX88172_CMD_READ_NODE_ID 0x17
#define AX_CMD_READ_PHY_ID 0x19
#define AX_CMD_READ_MEDIUM_STATUS 0x1a
#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
#define AX_CMD_READ_MONITOR_MODE 0x1c
#define AX_CMD_WRITE_MONITOR_MODE 0x1d
+#define AX_CMD_READ_GPIOS 0x1e
#define AX_CMD_WRITE_GPIOS 0x1f
#define AX_CMD_SW_RESET 0x20
#define AX_CMD_SW_PHY_STATUS 0x21
#define AX_CMD_SW_PHY_SELECT 0x22
-#define AX88772_CMD_READ_NODE_ID 0x13
#define AX_MONITOR_MODE 0x01
#define AX_MONITOR_LINK 0x02
@@ -70,15 +76,15 @@
#define AX_MONITOR_HSFS 0x10
/* AX88172 Medium Status Register values */
-#define AX_MEDIUM_FULL_DUPLEX 0x02
-#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
-#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
+#define AX88172_MEDIUM_FD 0x02
+#define AX88172_MEDIUM_TX 0x04
+#define AX88172_MEDIUM_FC 0x10
+#define AX88172_MEDIUM_DEFAULT \
+ ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
#define AX_MCAST_FILTER_SIZE 8
#define AX_MAX_MCAST 64
-#define AX_EEPROM_LEN 0x40
-
#define AX_SWRESET_CLEAR 0x00
#define AX_SWRESET_RR 0x01
#define AX_SWRESET_RT 0x02
@@ -92,23 +98,78 @@
#define AX88772_IPG1_DEFAULT 0x0c
#define AX88772_IPG2_DEFAULT 0x12
-#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
-#define AX88772_MEDIUM_RESERVED 0x0004
-#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
-#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
-#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
-#define AX88772_MEDIUM_RX_ENABLE 0x0100
-#define AX88772_MEDIUM_100MB 0x0200
-#define AX88772_MEDIUM_DEFAULT \
- (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
- AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
- AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
+/* AX88772 & AX88178 Medium Mode Register */
+#define AX_MEDIUM_PF 0x0080
+#define AX_MEDIUM_JFE 0x0040
+#define AX_MEDIUM_TFC 0x0020
+#define AX_MEDIUM_RFC 0x0010
+#define AX_MEDIUM_ENCK 0x0008
+#define AX_MEDIUM_AC 0x0004
+#define AX_MEDIUM_FD 0x0002
+#define AX_MEDIUM_GM 0x0001
+#define AX_MEDIUM_SM 0x1000
+#define AX_MEDIUM_SBP 0x0800
+#define AX_MEDIUM_PS 0x0200
+#define AX_MEDIUM_RE 0x0100
-#define AX_EEPROM_MAGIC 0xdeadbeef
+#define AX88178_MEDIUM_DEFAULT \
+ (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
+ AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
+ AX_MEDIUM_RE )
+
+#define AX88772_MEDIUM_DEFAULT \
+ (AX_MEDIUM_FD | AX_MEDIUM_RFC | \
+ AX_MEDIUM_TFC | AX_MEDIUM_PS | \
+ AX_MEDIUM_AC | AX_MEDIUM_RE )
+
+/* AX88772 & AX88178 RX_CTL values */
+#define AX_RX_CTL_SO 0x0080
+#define AX_RX_CTL_AP 0x0020
+#define AX_RX_CTL_AM 0x0010
+#define AX_RX_CTL_AB 0x0008
+#define AX_RX_CTL_SEP 0x0004
+#define AX_RX_CTL_AMALL 0x0002
+#define AX_RX_CTL_PRO 0x0001
+#define AX_RX_CTL_MFB_2048 0x0000
+#define AX_RX_CTL_MFB_4096 0x0100
+#define AX_RX_CTL_MFB_8192 0x0200
+#define AX_RX_CTL_MFB_16384 0x0300
+
+#define AX_DEFAULT_RX_CTL \
+ (AX_RX_CTL_SO | AX_RX_CTL_AB )
+
+/* GPIO 0 .. 2 toggles */
+#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */
+#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */
+#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */
+#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */
+#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */
+#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */
+#define AX_GPIO_RESERVED 0x40 /* Reserved */
+#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */
+
+#define AX_EEPROM_MAGIC 0xdeadbeef
+#define AX88172_EEPROM_LEN 0x40
+#define AX88772_EEPROM_LEN 0xff
+
+#define PHY_MODE_MARVELL 0x0000
+#define MII_MARVELL_LED_CTRL 0x0018
+#define MII_MARVELL_STATUS 0x001b
+#define MII_MARVELL_CTRL 0x0014
+
+#define MARVELL_LED_MANUAL 0x0019
+
+#define MARVELL_STATUS_HWCFG 0x0004
+
+#define MARVELL_CTRL_TXDELAY 0x0002
+#define MARVELL_CTRL_RXDELAY 0x0080
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
struct asix_data {
u8 multi_filter[AX_MCAST_FILTER_SIZE];
+ u8 phymode;
+ u8 ledmode;
+ u8 eeprom_len;
};
struct ax88172_int_data {
@@ -122,6 +183,8 @@
static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
+ devdbg(dev,"asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ cmd, value, index, size);
return usb_control_msg(
dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
@@ -137,6 +200,8 @@
static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
+ devdbg(dev,"asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ cmd, value, index, size);
return usb_control_msg(
dev->udev,
usb_sndctrlpipe(dev->udev, 0),
@@ -161,65 +226,139 @@
usb_free_urb(urb);
}
-static inline int asix_set_sw_mii(struct usbnet *dev)
+static void
+asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
{
- int ret;
- ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
- if (ret < 0)
- devdbg(dev, "Failed to enable software MII access");
- return ret;
-}
+ struct usb_ctrlrequest *req;
+ int status;
+ struct urb *urb;
-static inline int asix_set_hw_mii(struct usbnet *dev)
-{
- int ret;
- ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
- if (ret < 0)
- devdbg(dev, "Failed to enable hardware MII access");
- return ret;
-}
-
-static inline int asix_get_phyid(struct usbnet *dev)
-{
- int ret = 0;
- void *buf;
-
- buf = kmalloc(2, GFP_KERNEL);
- if (!buf)
- goto out1;
-
- if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
- 0, 0, 2, buf)) < 2) {
- devdbg(dev, "Error reading PHYID register: %02x", ret);
- goto out2;
+ devdbg(dev,"asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
+ cmd, value, index, size);
+ if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
+ deverr(dev, "Error allocating URB in write_cmd_async!");
+ return;
}
- ret = *((u8 *)buf + 1);
-out2:
- kfree(buf);
-out1:
- return ret;
+
+ if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
+ deverr(dev, "Failed to allocate memory for control request");
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ req->bRequest = cmd;
+ req->wValue = value;
+ req->wIndex = index;
+ req->wLength = size;
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, data, size,
+ asix_async_cmd_callback, req);
+
+ if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ deverr(dev, "Error submitting the control message: status=%d",
+ status);
+ kfree(req);
+ usb_free_urb(urb);
+ }
}
-static int asix_sw_reset(struct usbnet *dev, u8 flags)
+static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
- int ret;
+ u8 *head;
+ u32 header;
+ char *packet;
+ struct sk_buff *ax_skb;
+ u16 size;
- ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
- if (ret < 0)
- devdbg(dev,"Failed to send software reset: %02x", ret);
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
- return ret;
+ skb_pull(skb, 4);
+
+ while (skb->len > 0) {
+ if ((short)(header & 0x0000ffff) !=
+ ~((short)((header & 0xffff0000) >> 16))) {
+ deverr(dev,"asix_rx_fixup() Bad Header Length");
+ }
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+ if ((skb->len) - ((size + 1) & 0xfffe) == 0)
+ return 2;
+ if (size > ETH_FRAME_LEN) {
+ deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ ax_skb->tail = packet + size;
+ usbnet_skb_return(dev, ax_skb);
+ } else {
+ return 0;
+ }
+
+ skb_pull(skb, (size + 1) & 0xfffe);
+
+ if (skb->len == 0)
+ break;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+ skb_pull(skb, 4);
+ }
+
+ if (skb->len < 0) {
+ deverr(dev,"asix_rx_fixup() Bad SKB Length %d", skb->len);
+ return 0;
+ }
+ return 1;
}
-static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
{
- int ret;
+ int padlen;
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 packet_len;
+ u32 padbytes = 0xffff0000;
- ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
- if (ret < 0)
- devdbg(dev, "Failed to write RX_CTL mode: %02x", ret);
+ padlen = ((skb->len + 4) % 512) ? 0 : 4;
- return ret;
+ if ((!skb_cloned(skb))
+ && ((headroom + tailroom) >= (4 + padlen))) {
+ if ((headroom < 4) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + 4, skb->data, skb->len);
+ skb->tail = skb->data + skb->len;
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, 4, padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ memcpy(skb->data, &packet_len, sizeof(packet_len));
+
+ if ((skb->len % 512) == 0) {
+ memcpy( skb->tail, &padbytes, sizeof(padbytes));
+ skb_put(skb, sizeof(padbytes));
+ }
+ return skb;
}
static void asix_status(struct usbnet *dev, struct urb *urb)
@@ -242,55 +381,157 @@
}
}
-static void
-asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
+static inline int asix_set_sw_mii(struct usbnet *dev)
{
- struct usb_ctrlrequest *req;
- int status;
- struct urb *urb;
-
- if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
- devdbg(dev, "Error allocating URB in write_cmd_async!");
- return;
- }
-
- if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
- deverr(dev, "Failed to allocate memory for control request");
- usb_free_urb(urb);
- return;
- }
-
- req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- req->bRequest = cmd;
- req->wValue = cpu_to_le16(value);
- req->wIndex = cpu_to_le16(index);
- req->wLength = cpu_to_le16(size);
-
- usb_fill_control_urb(urb, dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- (void *)req, data, size,
- asix_async_cmd_callback, req);
-
- if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- deverr(dev, "Error submitting the control message: status=%d",
- status);
- kfree(req);
- usb_free_urb(urb);
- }
+ int ret;
+ ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to enable software MII access");
+ return ret;
}
+static inline int asix_set_hw_mii(struct usbnet *dev)
+{
+ int ret;
+ ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to enable hardware MII access");
+ return ret;
+}
+
+static inline int asix_get_phy_addr(struct usbnet *dev)
+{
+ int ret = 0;
+ void *buf;
+
+ devdbg(dev, "asix_get_phy_addr()");
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ goto out1;
+
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 2) {
+ deverr(dev, "Error reading PHYID register: %02x", ret);
+ goto out2;
+ }
+ devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((u16 *)buf));
+ ret = *((u8 *)buf + 1);
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+ int ret;
+
+ ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev,"Failed to send software reset: %02x", ret);
+
+ return ret;
+}
+
+static u16 asix_read_rx_ctl(struct usbnet *dev)
+{
+ u16 ret = 0;
+ void *buf;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ goto out1;
+
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL,
+ 0, 0, 2, buf)) < 2) {
+ deverr(dev, "Error reading RX_CTL register: %02x", ret);
+ goto out2;
+ }
+ ret = le16_to_cpu(*((u16 *)buf));
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ devdbg(dev,"asix_write_rx_ctl() - mode = 0x%04x", mode);
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to write RX_CTL mode to 0x%04x: %02x",
+ mode, ret);
+
+ return ret;
+}
+
+static u16 asix_read_medium_status(struct usbnet *dev)
+{
+ u16 ret = 0;
+ void *buf;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ goto out1;
+
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+ 0, 0, 2, buf)) < 2) {
+ deverr(dev, "Error reading Medium Status register: %02x", ret);
+ goto out2;
+ }
+ ret = le16_to_cpu(*((u16 *)buf));
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ devdbg(dev,"asix_write_medium_mode() - mode = 0x%04x", mode);
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to write Medium Mode mode to 0x%04x: %02x",
+ mode, ret);
+
+ return ret;
+}
+
+static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+ int ret;
+
+ devdbg(dev,"asix_write_gpio() - value = 0x%04x", value);
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+ if (ret < 0)
+ deverr(dev, "Failed to write GPIO value 0x%04x: %02x",
+ value, ret);
+
+ if (sleep)
+ msleep(sleep);
+
+ return ret;
+}
+
+/*
+ * AX88772 & AX88178 have a 16-bit RX_CTL value
+ */
static void asix_set_multicast(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
struct asix_data *data = (struct asix_data *)&dev->data;
- u8 rx_ctl = 0x8c;
+ u16 rx_ctl = AX_DEFAULT_RX_CTL;
if (net->flags & IFF_PROMISC) {
- rx_ctl |= 0x01;
+ rx_ctl |= AX_RX_CTL_PRO;
} else if (net->flags & IFF_ALLMULTI
|| net->mc_count > AX_MAX_MCAST) {
- rx_ctl |= 0x02;
+ rx_ctl |= AX_RX_CTL_AMALL;
} else if (net->mc_count == 0) {
/* just broadcast and directed */
} else {
@@ -317,7 +558,7 @@
asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
AX_MCAST_FILTER_SIZE, data->multi_filter);
- rx_ctl |= 0x10;
+ rx_ctl |= AX_RX_CTL_AM;
}
asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
@@ -333,50 +574,43 @@
(__u16)loc, 2, (u16 *)&res);
asix_set_hw_mii(dev);
- return res & 0xffff;
-}
+ devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res & 0xffff));
-/* same as above, but converts resulting value to cpu byte order */
-static int asix_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
-{
- return le16_to_cpu(asix_mdio_read(netdev,phy_id, loc));
+ return le16_to_cpu(res & 0xffff);
}
static void
asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
{
struct usbnet *dev = netdev_priv(netdev);
- u16 res = val;
+ u16 res = cpu_to_le16(val);
+ devdbg(dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", phy_id, loc, val);
asix_set_sw_mii(dev);
asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
(__u16)loc, 2, (u16 *)&res);
asix_set_hw_mii(dev);
}
-/* same as above, but converts new value to le16 byte order before writing */
-static void
-asix_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 asix_get_phyid(struct usbnet *dev)
{
- asix_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
-}
+ int phy_reg;
+ u32 phy_id;
-static int ax88172_link_reset(struct usbnet *dev)
-{
- u16 lpa;
- u16 adv;
- u16 res;
- u8 mode;
+ phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+ if (phy_reg < 0)
+ return 0;
- mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
- lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
- adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
- res = mii_nway_result(lpa|adv);
- if (res & LPA_DUPLEX)
- mode |= AX_MEDIUM_FULL_DUPLEX;
- asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+ phy_id = (phy_reg & 0xffff) << 16;
- return 0;
+ phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+ if (phy_reg < 0)
+ return 0;
+
+ phy_id |= (phy_reg & 0xffff);
+
+ return phy_id;
}
static void
@@ -423,7 +657,10 @@
static int asix_get_eeprom_len(struct net_device *net)
{
- return AX_EEPROM_LEN;
+ struct usbnet *dev = netdev_priv(net);
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
+ return data->eeprom_len;
}
static int asix_get_eeprom(struct net_device *net,
@@ -453,9 +690,14 @@
static void asix_get_drvinfo (struct net_device *net,
struct ethtool_drvinfo *info)
{
+ struct usbnet *dev = netdev_priv(net);
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
/* Inherit standard device info */
usbnet_get_drvinfo(net, info);
- info->eedump_len = 0x3e;
+ strncpy (info->driver, driver_name, sizeof info->driver);
+ strncpy (info->version, DRIVER_VERSION, sizeof info->version);
+ info->eedump_len = data->eeprom_len;
}
static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
@@ -468,8 +710,34 @@
static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
+ int res = mii_ethtool_sset(&dev->mii,cmd);
- return mii_ethtool_sset(&dev->mii,cmd);
+ /* link speed/duplex might have changed */
+ if (dev->driver_info->link_reset)
+ dev->driver_info->link_reset(dev);
+
+ return res;
+}
+
+static int asix_nway_reset(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_nway_restart(&dev->mii);
+}
+
+static u32 asix_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_link_ok(&dev->mii);
+}
+
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
/* We need to override some ethtool_ops so we require our
@@ -477,7 +745,8 @@
devices that may be connected at the same time. */
static struct ethtool_ops ax88172_ethtool_ops = {
.get_drvinfo = asix_get_drvinfo,
- .get_link = ethtool_op_get_link,
+ .get_link = asix_get_link,
+ .nway_reset = asix_nway_reset,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
.get_wol = asix_get_wol,
@@ -488,11 +757,66 @@
.set_settings = asix_set_settings,
};
-static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+static void ax88172_set_multicast(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ u8 rx_ctl = 0x8c;
- return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= 0x01;
+ } else if (net->flags & IFF_ALLMULTI
+ || net->mc_count > AX_MAX_MCAST) {
+ rx_ctl |= 0x02;
+ } else if (net->mc_count == 0) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later */
+ struct dev_mc_list *mc_list = net->mc_list;
+ u32 crc_bits;
+ int i;
+
+ memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ for (i = 0; i < net->mc_count; i++) {
+ crc_bits =
+ ether_crc(ETH_ALEN,
+ mc_list->dmi_addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ mc_list = mc_list->next;
+ }
+
+ asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+ AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= 0x10;
+ }
+
+ asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+ u8 mode;
+ struct ethtool_cmd ecmd;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = AX88172_MEDIUM_DEFAULT;
+
+ if (ecmd.duplex != DUPLEX_FULL)
+ mode |= ~AX88172_MEDIUM_FD;
+
+ devdbg(dev, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+
+ asix_write_medium_mode(dev, mode);
+
+ return 0;
}
static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -501,6 +825,9 @@
void *buf;
int i;
unsigned long gpio_bits = dev->driver_info->data;
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
+ data->eeprom_len = AX88172_EEPROM_LEN;
usbnet_get_endpoints(dev,intf);
@@ -519,12 +846,12 @@
msleep(5);
}
- if ((ret = asix_write_rx_ctl(dev,0x80)) < 0)
+ if ((ret = asix_write_rx_ctl(dev, 0x80)) < 0)
goto out2;
/* Get the MAC address */
memset(buf, 0, ETH_ALEN);
- if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ if ((ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
0, 0, 6, buf)) < 0) {
dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
goto out2;
@@ -537,14 +864,14 @@
dev->mii.mdio_write = asix_mdio_write;
dev->mii.phy_id_mask = 0x3f;
dev->mii.reg_num_mask = 0x1f;
- dev->mii.phy_id = asix_get_phyid(dev);
+ dev->mii.phy_id = asix_get_phy_addr(dev);
dev->net->do_ioctl = asix_ioctl;
- dev->net->set_multicast_list = asix_set_multicast;
+ dev->net->set_multicast_list = ax88172_set_multicast;
dev->net->ethtool_ops = &ax88172_ethtool_ops;
- asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
mii_nway_restart(&dev->mii);
@@ -557,7 +884,8 @@
static struct ethtool_ops ax88772_ethtool_ops = {
.get_drvinfo = asix_get_drvinfo,
- .get_link = ethtool_op_get_link,
+ .get_link = asix_get_link,
+ .nway_reset = asix_nway_reset,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
.get_wol = asix_get_wol,
@@ -568,10 +896,37 @@
.set_settings = asix_set_settings,
};
+static int ax88772_link_reset(struct usbnet *dev)
+{
+ u16 mode;
+ struct ethtool_cmd ecmd;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = AX88772_MEDIUM_DEFAULT;
+
+ if (ecmd.speed != SPEED_100)
+ mode &= ~AX_MEDIUM_PS;
+
+ if (ecmd.duplex != DUPLEX_FULL)
+ mode &= ~AX_MEDIUM_FD;
+
+ devdbg(dev, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+
+ asix_write_medium_mode(dev, mode);
+
+ return 0;
+}
+
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret;
void *buf;
+ u16 rx_ctl;
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ u32 phyid;
+
+ data->eeprom_len = AX88772_EEPROM_LEN;
usbnet_get_endpoints(dev,intf);
@@ -582,13 +937,12 @@
goto out1;
}
- if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
- 0x00B0, 0, 0, buf)) < 0)
+ if ((ret = asix_write_gpio(dev,
+ AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0)
goto out2;
- msleep(5);
if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
- 0x0001, 0, 0, buf)) < 0) {
+ 0x0000, 0, 0, buf)) < 0) {
dbg("Select PHY #1 failed: %d", ret);
goto out2;
}
@@ -605,36 +959,34 @@
goto out2;
msleep(150);
- if ((ret = asix_write_rx_ctl(dev, 0x00)) < 0)
+ rx_ctl = asix_read_rx_ctl(dev);
+ dbg("RX_CTL is 0x%04x after software reset", rx_ctl);
+ if ((ret = asix_write_rx_ctl(dev, 0x0000)) < 0)
goto out2;
+ rx_ctl = asix_read_rx_ctl(dev);
+ dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl);
+
/* Get the MAC address */
memset(buf, 0, ETH_ALEN);
- if ((ret = asix_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
0, 0, ETH_ALEN, buf)) < 0) {
dbg("Failed to read MAC address: %d", ret);
goto out2;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
- if ((ret = asix_set_sw_mii(dev)) < 0)
- goto out2;
-
- if (((ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG,
- 0x0010, 2, 2, buf)) < 0)
- || (*((u16 *)buf) != 0x003b)) {
- dbg("Read PHY register 2 must be 0x3b00: %d", ret);
- goto out2;
- }
-
/* Initialize MII structure */
dev->mii.dev = dev->net;
dev->mii.mdio_read = asix_mdio_read;
dev->mii.mdio_write = asix_mdio_write;
- dev->mii.phy_id_mask = 0xff;
- dev->mii.reg_num_mask = 0xff;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
dev->net->do_ioctl = asix_ioctl;
- dev->mii.phy_id = asix_get_phyid(dev);
+ dev->mii.phy_id = asix_get_phy_addr(dev);
+
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
goto out2;
@@ -649,16 +1001,13 @@
dev->net->set_multicast_list = asix_set_multicast;
dev->net->ethtool_ops = &ax88772_ethtool_ops;
- asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA);
mii_nway_restart(&dev->mii);
- if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
- AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
- dbg("Write medium mode register: %d", ret);
+ if ((ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT)) < 0)
goto out2;
- }
if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
@@ -666,13 +1015,17 @@
dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
goto out2;
}
- if ((ret = asix_set_hw_mii(dev)) < 0)
- goto out2;
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
- if ((ret = asix_write_rx_ctl(dev, 0x0088)) < 0)
+ if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
goto out2;
+ rx_ctl = asix_read_rx_ctl(dev);
+ dbg("RX_CTL is 0x%04x after all initializations", rx_ctl);
+
+ rx_ctl = asix_read_medium_status(dev);
+ dbg("Medium Status is 0x%04x after all initializations", rx_ctl);
+
kfree(buf);
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
@@ -690,122 +1043,287 @@
return ret;
}
-static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+static struct ethtool_ops ax88178_ethtool_ops = {
+ .get_drvinfo = asix_get_drvinfo,
+ .get_link = asix_get_link,
+ .nway_reset = asix_nway_reset,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = asix_get_wol,
+ .set_wol = asix_set_wol,
+ .get_eeprom_len = asix_get_eeprom_len,
+ .get_eeprom = asix_get_eeprom,
+ .get_settings = asix_get_settings,
+ .set_settings = asix_set_settings,
+};
+
+static int marvell_phy_init(struct usbnet *dev)
{
- u8 *head;
- u32 header;
- char *packet;
- struct sk_buff *ax_skb;
- u16 size;
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ u16 reg;
- head = (u8 *) skb->data;
- memcpy(&header, head, sizeof(header));
- le32_to_cpus(&header);
- packet = head + sizeof(header);
+ devdbg(dev,"marvell_phy_init()");
- skb_pull(skb, 4);
+ reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
+ devdbg(dev,"MII_MARVELL_STATUS = 0x%04x", reg);
- while (skb->len > 0) {
- if ((short)(header & 0x0000ffff) !=
- ~((short)((header & 0xffff0000) >> 16))) {
- devdbg(dev,"header length data is error");
- }
- /* get the packet length */
- size = (u16) (header & 0x0000ffff);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
+ MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
- return 2;
- if (size > ETH_FRAME_LEN) {
- devdbg(dev,"invalid rx length %d", size);
- return 0;
- }
- ax_skb = skb_clone(skb, GFP_ATOMIC);
- if (ax_skb) {
- ax_skb->len = size;
- ax_skb->data = packet;
- ax_skb->tail = packet + size;
- usbnet_skb_return(dev, ax_skb);
- } else {
- return 0;
- }
+ if (data->ledmode) {
+ reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+ MII_MARVELL_LED_CTRL);
+ devdbg(dev,"MII_MARVELL_LED_CTRL (1) = 0x%04x", reg);
- skb_pull(skb, (size + 1) & 0xfffe);
+ reg &= 0xf8ff;
+ reg |= (1 + 0x0100);
+ asix_mdio_write(dev->net, dev->mii.phy_id,
+ MII_MARVELL_LED_CTRL, reg);
- if (skb->len == 0)
- break;
-
- head = (u8 *) skb->data;
- memcpy(&header, head, sizeof(header));
- le32_to_cpus(&header);
- packet = head + sizeof(header);
- skb_pull(skb, 4);
+ reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+ MII_MARVELL_LED_CTRL);
+ devdbg(dev,"MII_MARVELL_LED_CTRL (2) = 0x%04x", reg);
+ reg &= 0xfc0f;
}
- if (skb->len < 0) {
- devdbg(dev,"invalid rx length %d", skb->len);
- return 0;
- }
- return 1;
-}
-
-static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
- gfp_t flags)
-{
- int padlen;
- int headroom = skb_headroom(skb);
- int tailroom = skb_tailroom(skb);
- u32 packet_len;
- u32 padbytes = 0xffff0000;
-
- padlen = ((skb->len + 4) % 512) ? 0 : 4;
-
- if ((!skb_cloned(skb))
- && ((headroom + tailroom) >= (4 + padlen))) {
- if ((headroom < 4) || (tailroom < padlen)) {
- skb->data = memmove(skb->head + 4, skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- }
- } else {
- struct sk_buff *skb2;
- skb2 = skb_copy_expand(skb, 4, padlen, flags);
- dev_kfree_skb_any(skb);
- skb = skb2;
- if (!skb)
- return NULL;
- }
-
- skb_push(skb, 4);
- packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
- memcpy(skb->data, &packet_len, sizeof(packet_len));
-
- if ((skb->len % 512) == 0) {
- memcpy( skb->tail, &padbytes, sizeof(padbytes));
- skb_put(skb, sizeof(padbytes));
- }
- return skb;
-}
-
-static int ax88772_link_reset(struct usbnet *dev)
-{
- u16 lpa;
- u16 adv;
- u16 res;
- u16 mode;
-
- mode = AX88772_MEDIUM_DEFAULT;
- lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
- adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
- res = mii_nway_result(lpa|adv);
-
- if ((res & LPA_DUPLEX) == 0)
- mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
- if ((res & LPA_100) == 0)
- mode &= ~AX88772_MEDIUM_100MB;
- asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
-
return 0;
}
+static int marvell_led_status(struct usbnet *dev, u16 speed)
+{
+ u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
+
+ devdbg(dev, "marvell_led_status() read 0x%04x", reg);
+
+ /* Clear out the center LED bits - 0x03F0 */
+ reg &= 0xfc0f;
+
+ switch (speed) {
+ case SPEED_1000:
+ reg |= 0x03e0;
+ break;
+ case SPEED_100:
+ reg |= 0x03b0;
+ break;
+ default:
+ reg |= 0x02f0;
+ }
+
+ devdbg(dev, "marvell_led_status() writing 0x%04x", reg);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
+
+ return 0;
+}
+
+static int ax88178_link_reset(struct usbnet *dev)
+{
+ u16 mode;
+ struct ethtool_cmd ecmd;
+ struct asix_data *data = (struct asix_data *)&dev->data;
+
+ devdbg(dev,"ax88178_link_reset()");
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = AX88178_MEDIUM_DEFAULT;
+
+ if (ecmd.speed == SPEED_1000)
+ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
+ else if (ecmd.speed == SPEED_100)
+ mode |= AX_MEDIUM_PS;
+ else
+ mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
+ if (ecmd.duplex == DUPLEX_FULL)
+ mode |= AX_MEDIUM_FD;
+ else
+ mode &= ~AX_MEDIUM_FD;
+
+ devdbg(dev, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
+
+ asix_write_medium_mode(dev, mode);
+
+ if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
+ marvell_led_status(dev, ecmd.speed);
+
+ return 0;
+}
+
+static void ax88178_set_mfb(struct usbnet *dev)
+{
+ u16 mfb = AX_RX_CTL_MFB_16384;
+ u16 rxctl;
+ u16 medium;
+ int old_rx_urb_size = dev->rx_urb_size;
+
+ if (dev->hard_mtu < 2048) {
+ dev->rx_urb_size = 2048;
+ mfb = AX_RX_CTL_MFB_2048;
+ } else if (dev->hard_mtu < 4096) {
+ dev->rx_urb_size = 4096;
+ mfb = AX_RX_CTL_MFB_4096;
+ } else if (dev->hard_mtu < 8192) {
+ dev->rx_urb_size = 8192;
+ mfb = AX_RX_CTL_MFB_8192;
+ } else if (dev->hard_mtu < 16384) {
+ dev->rx_urb_size = 16384;
+ mfb = AX_RX_CTL_MFB_16384;
+ }
+
+ rxctl = asix_read_rx_ctl(dev);
+ asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
+
+ medium = asix_read_medium_status(dev);
+ if (dev->net->mtu > 1500)
+ medium |= AX_MEDIUM_JFE;
+ else
+ medium &= ~AX_MEDIUM_JFE;
+ asix_write_medium_mode(dev, medium);
+
+ if (dev->rx_urb_size > old_rx_urb_size)
+ usbnet_unlink_rx_urbs(dev);
+}
+
+static int ax88178_change_mtu(struct net_device *net, int new_mtu)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int ll_mtu = new_mtu + net->hard_header_len + 4;
+
+ devdbg(dev, "ax88178_change_mtu() new_mtu=%d", new_mtu);
+
+ if (new_mtu <= 0 || ll_mtu > 16384)
+ return -EINVAL;
+
+ if ((ll_mtu % dev->maxpacket) == 0)
+ return -EDOM;
+
+ net->mtu = new_mtu;
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+ ax88178_set_mfb(dev);
+
+ return 0;
+}
+
+static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct asix_data *data = (struct asix_data *)&dev->data;
+ int ret;
+ void *buf;
+ u16 eeprom;
+ int gpio0 = 0;
+ u32 phyid;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(6, GFP_KERNEL);
+ if(!buf) {
+ dbg ("Cannot allocate memory for buffer");
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ eeprom = 0;
+ asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &eeprom);
+ dbg("GPIO Status: 0x%04x", eeprom);
+
+ asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
+ asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
+ asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
+
+ dbg("EEPROM index 0x17 is 0x%04x", eeprom);
+
+ if (eeprom == 0xffff) {
+ data->phymode = PHY_MODE_MARVELL;
+ data->ledmode = 0;
+ gpio0 = 1;
+ } else {
+ data->phymode = eeprom & 7;
+ data->ledmode = eeprom >> 8;
+ gpio0 = (eeprom & 0x80) ? 0 : 1;
+ }
+ dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
+
+ asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
+ if ((eeprom >> 8) != 1) {
+ asix_write_gpio(dev, 0x003c, 30);
+ asix_write_gpio(dev, 0x001c, 300);
+ asix_write_gpio(dev, 0x003c, 30);
+ } else {
+ dbg("gpio phymode == 1 path");
+ asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
+ asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
+ }
+
+ asix_sw_reset(dev, 0);
+ msleep(150);
+
+ asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+ msleep(150);
+
+ asix_write_rx_ctl(dev, 0);
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ 0, 0, ETH_ALEN, buf)) < 0) {
+ dbg("Failed to read MAC address: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = asix_mdio_read;
+ dev->mii.mdio_write = asix_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0xff;
+ dev->mii.supports_gmii = 1;
+ dev->net->do_ioctl = asix_ioctl;
+ dev->mii.phy_id = asix_get_phy_addr(dev);
+ dev->net->set_multicast_list = asix_set_multicast;
+ dev->net->ethtool_ops = &ax88178_ethtool_ops;
+ dev->net->change_mtu = &ax88178_change_mtu;
+
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
+ if (data->phymode == PHY_MODE_MARVELL) {
+ marvell_phy_init(dev);
+ msleep(60);
+ }
+
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
+ BMCR_RESET | BMCR_ANENABLE);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+ ADVERTISE_1000FULL);
+
+ mii_nway_restart(&dev->mii);
+
+ if ((ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT)) < 0)
+ goto out2;
+
+ if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
+ goto out2;
+
+ kfree(buf);
+
+ /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+ if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+ /* hard_mtu is still the default - the device does not support
+ jumbo eth frames */
+ dev->rx_urb_size = 2048;
+ }
+
+ return 0;
+
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
static const struct driver_info ax8817x_info = {
.description = "ASIX AX8817x USB 2.0 Ethernet",
.bind = ax88172_bind,
@@ -853,8 +1371,19 @@
.link_reset = ax88772_link_reset,
.reset = ax88772_link_reset,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
- .rx_fixup = ax88772_rx_fixup,
- .tx_fixup = ax88772_tx_fixup,
+ .rx_fixup = asix_rx_fixup,
+ .tx_fixup = asix_tx_fixup,
+};
+
+static const struct driver_info ax88178_info = {
+ .description = "ASIX AX88178 USB 2.0 Ethernet",
+ .bind = ax88178_bind,
+ .status = asix_status,
+ .link_reset = ax88178_link_reset,
+ .reset = ax88178_link_reset,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = asix_rx_fixup,
+ .tx_fixup = asix_tx_fixup,
};
static const struct usb_device_id products [] = {
@@ -913,7 +1442,7 @@
}, {
// ASIX AX88178 10/100/1000
USB_DEVICE (0x0b95, 0x1780),
- .driver_info = (unsigned long) &ax88772_info,
+ .driver_info = (unsigned long) &ax88178_info,
}, {
// Linksys USB200M Rev 2
USB_DEVICE (0x13b1, 0x0018),
@@ -922,6 +1451,14 @@
// 0Q0 cable ethernet
USB_DEVICE (0x1557, 0x7720),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // DLink DUB-E100 H/W Ver B1
+ USB_DEVICE (0x07d1, 0x3c05),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
+ // Linksys USB1000
+ USB_DEVICE (0x1737, 0x0039),
+ .driver_info = (unsigned long) &ax88178_info,
},
{ }, // END
};
diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c
index a9b6eea..301baa7 100644
--- a/drivers/usb/net/net1080.c
+++ b/drivers/usb/net/net1080.c
@@ -498,25 +498,24 @@
static struct sk_buff *
net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
- int padlen;
struct sk_buff *skb2;
struct nc_header *header = NULL;
struct nc_trailer *trailer = NULL;
+ int padlen = sizeof (struct nc_trailer);
int len = skb->len;
- padlen = ((len + sizeof (struct nc_header)
- + sizeof (struct nc_trailer)) & 0x01) ? 0 : 1;
+ if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
+ padlen++;
if (!skb_cloned(skb)) {
int headroom = skb_headroom(skb);
int tailroom = skb_tailroom(skb);
- if ((padlen + sizeof (struct nc_trailer)) <= tailroom
- && sizeof (struct nc_header) <= headroom)
+ if (padlen <= tailroom &&
+ sizeof(struct nc_header) <= headroom)
/* There's enough head and tail room */
goto encapsulate;
- if ((sizeof (struct nc_header) + padlen
- + sizeof (struct nc_trailer)) <
+ if ((sizeof (struct nc_header) + padlen) <
(headroom + tailroom)) {
/* There's enough total room, so just readjust */
skb->data = memmove(skb->head
@@ -530,7 +529,7 @@
/* Create a new skb to use with the correct size */
skb2 = skb_copy_expand(skb,
sizeof (struct nc_header),
- sizeof (struct nc_trailer) + padlen,
+ padlen,
flags);
dev_kfree_skb_any(skb);
if (!skb2)
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index ab21f96..b8e25af 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -619,7 +619,7 @@
switch (urb->status) {
case 0:
break;
- case -ETIMEDOUT:
+ case -ETIME:
if (netif_msg_rx_err(pegasus))
pr_debug("%s: reset MAC\n", net->name);
pegasus->flags &= ~PEGASUS_RX_BUSY;
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index a72685b..2364c20 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -438,7 +438,7 @@
break;
case -ENOENT:
return; /* the urb is in unlink state */
- case -ETIMEDOUT:
+ case -ETIME:
warn("may be reset is needed?..");
goto goon;
default:
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 54183e1..98a522f 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -61,8 +61,11 @@
* let the USB host controller be busy for 5msec or more before an irq
* is required, under load. Jumbograms change the equation.
*/
-#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
-#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
+#define RX_MAX_QUEUE_MEMORY (60 * 1518)
+#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
+ (RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4)
+#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
+ (RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4)
// reawaken network queue this soon after stopping; else watchdog barks
#define TX_TIMEOUT_JIFFIES (5*HZ)
@@ -227,13 +230,23 @@
{
struct usbnet *dev = netdev_priv(net);
int ll_mtu = new_mtu + net->hard_header_len;
+ int old_hard_mtu = dev->hard_mtu;
+ int old_rx_urb_size = dev->rx_urb_size;
- if (new_mtu <= 0 || ll_mtu > dev->hard_mtu)
+ if (new_mtu <= 0)
return -EINVAL;
// no second zero-length packet read wanted after mtu-sized packets
if ((ll_mtu % dev->maxpacket) == 0)
return -EDOM;
net->mtu = new_mtu;
+
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+ if (dev->rx_urb_size == old_hard_mtu) {
+ dev->rx_urb_size = dev->hard_mtu;
+ if (dev->rx_urb_size > old_rx_urb_size)
+ usbnet_unlink_rx_urbs(dev);
+ }
+
return 0;
}
@@ -412,9 +425,9 @@
// we get controller i/o faults during khubd disconnect() delays.
// throttle down resubmits, to avoid log floods; just temporarily,
// so we still recover when the fault isn't a khubd delay.
- case -EPROTO: // ehci
- case -ETIMEDOUT: // ohci
- case -EILSEQ: // uhci
+ case -EPROTO:
+ case -ETIME:
+ case -EILSEQ:
dev->stats.rx_errors++;
if (!timer_pending (&dev->delay)) {
mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
@@ -521,6 +534,17 @@
return count;
}
+// Flush all pending rx urbs
+// minidrivers may need to do this when the MTU changes
+
+void usbnet_unlink_rx_urbs(struct usbnet *dev)
+{
+ if (netif_running(dev->net)) {
+ (void) unlink_urbs (dev, &dev->rxq);
+ tasklet_schedule(&dev->bh);
+ }
+}
+EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
/*-------------------------------------------------------------------------*/
@@ -629,7 +653,7 @@
devinfo (dev, "open: enable queueing "
"(rx %d, tx %d) mtu %d %s framing",
- RX_QLEN (dev), TX_QLEN (dev), dev->net->mtu,
+ (int)RX_QLEN (dev), (int)TX_QLEN (dev), dev->net->mtu,
framing);
}
@@ -797,9 +821,9 @@
// like rx, tx gets controller i/o faults during khubd delays
// and so it uses the same throttling mechanism.
- case -EPROTO: // ehci
- case -ETIMEDOUT: // ohci
- case -EILSEQ: // uhci
+ case -EPROTO:
+ case -ETIME:
+ case -EILSEQ:
if (!timer_pending (&dev->delay)) {
mod_timer (&dev->delay,
jiffies + THROTTLE_JIFFIES);
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
index 89fc495..c0746f0 100644
--- a/drivers/usb/net/usbnet.h
+++ b/drivers/usb/net/usbnet.h
@@ -166,6 +166,7 @@
extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
extern void usbnet_defer_kevent (struct usbnet *, int);
extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
+extern void usbnet_unlink_rx_urbs(struct usbnet *);
extern u32 usbnet_get_msglevel (struct net_device *);
extern void usbnet_set_msglevel (struct net_device *, u32);
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index f5b9438..5076b9d 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -53,6 +53,15 @@
support" be compiled as a module for this driver to be used
properly.
+config USB_SERIAL_AIRCABLE
+ tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use AIRcable USB Bluetoot Dongle.
+
+ To compile this driver as a module, choose M here: the module
+ will be called aircable.
+
config USB_SERIAL_AIRPRIME
tristate "USB AirPrime CDMA Wireless Driver"
depends on USB_SERIAL
@@ -413,6 +422,21 @@
To compile this driver as a module, choose M here: the
module will be called mct_u232.
+config USB_SERIAL_MOS7840
+ tristate "USB Moschip 7840/7820 USB Serial Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
+ Dual-Serial port device from MosChip Semiconductor.
+
+ The MCS7840 and MCS7820 have been developed to connect a wide range
+ of standard serial devices to a USB host. The MCS7840 has a USB
+ device controller connected to four (4) individual UARTs while the
+ MCS7820 controller connects to two (2) individual UARTs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mos7840. If unsure, choose N.
+
config USB_SERIAL_NAVMAN
tristate "USB Navman GPS device"
depends on USB_SERIAL
@@ -526,5 +550,6 @@
depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
default y
+
endmenu
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 8efed2c..8dce833 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -11,6 +11,7 @@
usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
+obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
@@ -33,6 +34,7 @@
obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
+obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
new file mode 100644
index 0000000..2ccd9de
--- /dev/null
+++ b/drivers/usb/serial/aircable.c
@@ -0,0 +1,625 @@
+/*
+ * AIRcable USB Bluetooth Dongle Driver.
+ *
+ * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * The device works as an standard CDC device, it has 2 interfaces, the first
+ * one is for firmware access and the second is the serial one.
+ * The protocol is very simply, there are two posibilities reading or writing.
+ * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * next two bytes must say how much data will be sended.
+ * When reading the process is almost equal except that the header starts with
+ * 0x00 0x20.
+ *
+ * The device simply need some stuff to understand data comming from the usb
+ * buffer: The First and Second byte is used for a Header, the Third and Fourth
+ * tells the device the amount of information the package holds.
+ * Packages are 60 bytes long Header Stuff.
+ * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
+ * situation, when too much data arrives to the device because it sends the data
+ * but with out the header. I will use a simply hack to override this situation,
+ * if there is data coming that does not contain any header, then that is data
+ * that must go directly to the tty, as there is no documentation about if there
+ * is any other control code, I will simply check for the first
+ * one.
+ *
+ * The driver registers himself with the USB-serial core and the USB Core. I had
+ * to implement a probe function agains USB-serial, because other way, the
+ * driver was attaching himself to both interfaces. I have tryed with different
+ * configurations of usb_serial_driver with out exit, only the probe function
+ * could handle this correctly.
+ *
+ * I have taken some info from a Greg Kroah-Hartman article:
+ * http://www.linuxjournal.com/article/6573
+ * And from Linux Device Driver Kit CD, which is a great work, the authors taken
+ * the work to recompile lots of information an knowladge in drivers development
+ * and made it all avaible inside a cd.
+ * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/
+ *
+ */
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/circ_buf.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static int debug;
+
+/* Vendor and Product ID */
+#define AIRCABLE_VID 0x16CA
+#define AIRCABLE_USB_PID 0x1502
+
+/* write buffer size defines */
+#define AIRCABLE_BUF_SIZE 2048
+
+/* Protocol Stuff */
+#define HCI_HEADER_LENGTH 0x4
+#define TX_HEADER_0 0x20
+#define TX_HEADER_1 0x29
+#define RX_HEADER_0 0x00
+#define RX_HEADER_1 0x20
+#define MAX_HCI_FRAMESIZE 60
+#define HCI_COMPLETE_FRAME 64
+
+/* rx_flags */
+#define THROTTLED 0x01
+#define ACTUALLY_THROTTLED 0x02
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.0b2"
+#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>"
+#define DRIVER_DESC "AIRcable USB Driver"
+
+/* ID table that will be registered with USB core */
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+/* Internal Structure */
+struct aircable_private {
+ spinlock_t rx_lock; /* spinlock for the receive lines */
+ struct circ_buf *tx_buf; /* write buffer */
+ struct circ_buf *rx_buf; /* read buffer */
+ int rx_flags; /* for throttilng */
+ struct work_struct rx_work; /* work cue for the receiving line */
+};
+
+/* Private methods */
+
+/* Circular Buffer Methods, code from ti_usb_3410_5052 used */
+/*
+ * serial_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+static void serial_buf_clear(struct circ_buf *cb)
+{
+ cb->head = cb->tail = 0;
+}
+
+/*
+ * serial_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static struct circ_buf *serial_buf_alloc(void)
+{
+ struct circ_buf *cb;
+ cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
+ if (cb == NULL)
+ return NULL;
+ cb->buf = kmalloc(AIRCABLE_BUF_SIZE, GFP_KERNEL);
+ if (cb->buf == NULL) {
+ kfree(cb);
+ return NULL;
+ }
+ serial_buf_clear(cb);
+ return cb;
+}
+
+/*
+ * serial_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+static void serial_buf_free(struct circ_buf *cb)
+{
+ kfree(cb->buf);
+ kfree(cb);
+}
+
+/*
+ * serial_buf_data_avail
+ *
+ * Return the number of bytes of data available in the circular
+ * buffer.
+ */
+static int serial_buf_data_avail(struct circ_buf *cb)
+{
+ return CIRC_CNT(cb->head,cb->tail,AIRCABLE_BUF_SIZE);
+}
+
+/*
+ * serial_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+static int serial_buf_put(struct circ_buf *cb, const char *buf, int count)
+{
+ int c, ret = 0;
+ while (1) {
+ c = CIRC_SPACE_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(cb->buf + cb->head, buf, c);
+ cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1);
+ buf += c;
+ count -= c;
+ ret= c;
+ }
+ return ret;
+}
+
+/*
+ * serial_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+static int serial_buf_get(struct circ_buf *cb, char *buf, int count)
+{
+ int c, ret = 0;
+ while (1) {
+ c = CIRC_CNT_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(buf, cb->buf + cb->tail, c);
+ cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1);
+ buf += c;
+ count -= c;
+ ret= c;
+ }
+ return ret;
+}
+
+/* End of circula buffer methods */
+
+static void aircable_send(struct usb_serial_port *port)
+{
+ int count, result;
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ unsigned char* buf;
+ dbg("%s - port %d", __FUNCTION__, port->number);
+ if (port->write_urb_busy)
+ return;
+
+ count = min(serial_buf_data_avail(priv->tx_buf), MAX_HCI_FRAMESIZE);
+ if (count == 0)
+ return;
+
+ buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
+ if (!buf) {
+ err("%s- kzalloc(%d) failed.", __FUNCTION__,
+ count + HCI_HEADER_LENGTH);
+ return;
+ }
+
+ buf[0] = TX_HEADER_0;
+ buf[1] = TX_HEADER_1;
+ buf[2] = (unsigned char)count;
+ buf[3] = (unsigned char)(count >> 8);
+ serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE);
+
+ memcpy(port->write_urb->transfer_buffer, buf,
+ count + HCI_HEADER_LENGTH);
+
+ kfree(buf);
+ port->write_urb_busy = 1;
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ count + HCI_HEADER_LENGTH,
+ port->write_urb->transfer_buffer);
+ port->write_urb->transfer_buffer_length = count + HCI_HEADER_LENGTH;
+ port->write_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+
+ if (result) {
+ dev_err(&port->dev,
+ "%s - failed submitting write urb, error %d\n",
+ __FUNCTION__, result);
+ port->write_urb_busy = 0;
+ }
+
+ schedule_work(&port->work);
+}
+
+static void aircable_read(void *params)
+{
+ struct usb_serial_port *port = params;
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
+ unsigned char *data;
+ int count;
+ if (priv->rx_flags & THROTTLED){
+ if (priv->rx_flags & ACTUALLY_THROTTLED)
+ schedule_work(&priv->rx_work);
+ return;
+ }
+
+ /* By now I will flush data to the tty in packages of no more than
+ * 64 bytes, to ensure I do not get throttled.
+ * Ask USB mailing list for better aproach.
+ */
+ tty = port->tty;
+
+ if (!tty)
+ schedule_work(&priv->rx_work);
+
+ count = min(64, serial_buf_data_avail(priv->rx_buf));
+
+ if (count <= 0)
+ return; //We have finished sending everything.
+
+ tty_prepare_flip_string(tty, &data, count);
+ if (!data){
+ err("%s- kzalloc(%d) failed.", __FUNCTION__, count);
+ return;
+ }
+
+ serial_buf_get(priv->rx_buf, data, count);
+
+ tty_flip_buffer_push(tty);
+
+ if (serial_buf_data_avail(priv->rx_buf))
+ schedule_work(&priv->rx_work);
+
+ return;
+}
+/* End of private methods */
+
+static int aircable_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *iface_desc = serial->interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint;
+ int num_bulk_out=0;
+ int i;
+
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
+ ((endpoint->bmAttributes & 3) == 0x02)) {
+ /* we found our bulk out endpoint */
+ dbg("found bulk out on endpoint %d", i);
+ ++num_bulk_out;
+ }
+ }
+
+ if (num_bulk_out == 0) {
+ dbg("Invalid interface, discarding");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int aircable_attach (struct usb_serial *serial)
+{
+ struct usb_serial_port *port = serial->port[0];
+ struct aircable_private *priv;
+
+ priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
+ if (!priv){
+ err("%s- kmalloc(%Zd) failed.", __FUNCTION__,
+ sizeof(struct aircable_private));
+ return -ENOMEM;
+ }
+
+ /* Allocation of Circular Buffers */
+ priv->tx_buf = serial_buf_alloc();
+ if (priv->tx_buf == NULL) {
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ priv->rx_buf = serial_buf_alloc();
+ if (priv->rx_buf == NULL) {
+ kfree(priv->tx_buf);
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
+ INIT_WORK(&priv->rx_work, aircable_read, port);
+
+ usb_set_serial_port_data(serial->port[0], priv);
+
+ return 0;
+}
+
+static void aircable_shutdown(struct usb_serial *serial)
+{
+
+ struct usb_serial_port *port = serial->port[0];
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+
+ dbg("%s", __FUNCTION__);
+
+ if (priv) {
+ serial_buf_free(priv->tx_buf);
+ serial_buf_free(priv->rx_buf);
+ usb_set_serial_port_data(port, NULL);
+ kfree(priv);
+ }
+}
+
+static int aircable_write_room(struct usb_serial_port *port)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ return serial_buf_data_avail(priv->tx_buf);
+}
+
+static int aircable_write(struct usb_serial_port *port,
+ const unsigned char *source, int count)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ int temp;
+
+ dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, source);
+
+ if (!count){
+ dbg("%s - write request of 0 bytes", __FUNCTION__);
+ return count;
+ }
+
+ temp = serial_buf_put(priv->tx_buf, source, count);
+
+ aircable_send(port);
+
+ if (count > AIRCABLE_BUF_SIZE)
+ count = AIRCABLE_BUF_SIZE;
+
+ return count;
+
+}
+
+static void aircable_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port = urb->context;
+ int result;
+
+ dbg("%s - urb->status: %d", __FUNCTION__ , urb->status);
+
+ /* This has been taken from cypress_m8.c cypress_write_int_callback */
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ port->write_urb_busy = 0;
+ return;
+ default:
+ /* error in the urb, so we have to resubmit it */
+ dbg("%s - Overflow in write", __FUNCTION__);
+ dbg("%s - nonzero write bulk status received: %d",
+ __FUNCTION__, urb->status);
+ port->write_urb->transfer_buffer_length = 1;
+ port->write_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->write_urb, GFP_KERNEL);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting write urb, error %d\n",
+ __FUNCTION__, result);
+ else
+ return;
+ }
+
+ port->write_urb_busy = 0;
+
+ aircable_send(port);
+}
+
+static void aircable_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port = urb->context;
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
+ unsigned long no_packages, remaining, package_length, i;
+ int result, shift = 0;
+ unsigned char *temp;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (urb->status) {
+ dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ if (!port->open_count) {
+ dbg("%s - port is closed, exiting.", __FUNCTION__);
+ return;
+ }
+ if (urb->status == -EPROTO) {
+ dbg("%s - caught -EPROTO, resubmitting the urb",
+ __FUNCTION__);
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ aircable_read_bulk_callback, port);
+
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __FUNCTION__, result);
+ return;
+ }
+ dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
+ return;
+ }
+
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ urb->actual_length,urb->transfer_buffer);
+
+ tty = port->tty;
+ if (tty && urb->actual_length) {
+ if (urb->actual_length <= 2) {
+ /* This is an incomplete package */
+ serial_buf_put(priv->rx_buf, urb->transfer_buffer,
+ urb->actual_length);
+ } else {
+ temp = urb->transfer_buffer;
+ if (temp[0] == RX_HEADER_0)
+ shift = HCI_HEADER_LENGTH;
+
+ remaining = urb->actual_length;
+ no_packages = urb->actual_length / (HCI_COMPLETE_FRAME);
+
+ if (urb->actual_length % HCI_COMPLETE_FRAME != 0)
+ no_packages+=1;
+
+ for (i = 0; i < no_packages ;i++) {
+ if (remaining > (HCI_COMPLETE_FRAME))
+ package_length = HCI_COMPLETE_FRAME;
+ else
+ package_length = remaining;
+ remaining -= package_length;
+
+ serial_buf_put(priv->rx_buf,
+ urb->transfer_buffer + shift +
+ (HCI_COMPLETE_FRAME) * (i),
+ package_length - shift);
+ }
+ }
+ aircable_read(port);
+ }
+
+ /* Schedule the next read _if_ we are still open */
+ if (port->open_count) {
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ aircable_read_bulk_callback, port);
+
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __FUNCTION__, result);
+ }
+
+ return;
+}
+
+/* Based on ftdi_sio.c throttle */
+static void aircable_throttle(struct usb_serial_port *port)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ priv->rx_flags |= THROTTLED;
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+}
+
+/* Based on ftdi_sio.c unthrottle */
+static void aircable_unthrottle(struct usb_serial_port *port)
+{
+ struct aircable_private *priv = usb_get_serial_port_data(port);
+ int actually_throttled;
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
+ priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+
+ if (actually_throttled)
+ schedule_work(&priv->rx_work);
+}
+
+static struct usb_serial_driver aircable_device = {
+ .description = "aircable",
+ .id_table = id_table,
+ .num_ports = 1,
+ .attach = aircable_attach,
+ .probe = aircable_probe,
+ .shutdown = aircable_shutdown,
+ .write = aircable_write,
+ .write_room = aircable_write_room,
+ .write_bulk_callback = aircable_write_bulk_callback,
+ .read_bulk_callback = aircable_read_bulk_callback,
+ .throttle = aircable_throttle,
+ .unthrottle = aircable_unthrottle,
+};
+
+static struct usb_driver aircable_driver = {
+ .name = "aircable",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static int __init aircable_init (void)
+{
+ int retval;
+ retval = usb_serial_register(&aircable_device);
+ if (retval)
+ goto failed_serial_register;
+ retval = usb_register(&aircable_driver);
+ if (retval)
+ goto failed_usb_register;
+ return 0;
+
+failed_serial_register:
+ usb_serial_deregister(&aircable_device);
+failed_usb_register:
+ return retval;
+}
+
+static void __exit aircable_exit (void)
+{
+ usb_deregister(&aircable_driver);
+ usb_serial_deregister(&aircable_device);
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_init(aircable_init);
+module_exit(aircable_exit);
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 6208253..6e1a84a 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -1,7 +1,7 @@
/*
* AirPrime CDMA Wireless Serial USB driver
*
- * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
@@ -11,26 +11,264 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
- { USB_DEVICE(0xf3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */
- { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+ { USB_DEVICE(0x0f3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */
+ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
+ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
+#define URB_TRANSFER_BUFFER_SIZE 4096
+#define NUM_READ_URBS 4
+#define NUM_WRITE_URBS 4
+#define NUM_BULK_EPS 3
+#define MAX_BULK_EPS 6
+
+/* if overridden by the user, then use their value for the size of the
+ * read and write urbs, and the number of endpoints */
+static int buffer_size = URB_TRANSFER_BUFFER_SIZE;
+static int endpoints = NUM_BULK_EPS;
+static int debug;
+struct airprime_private {
+ spinlock_t lock;
+ int outstanding_urbs;
+ int throttled;
+ struct urb *read_urbp[NUM_READ_URBS];
+};
+
+static void airprime_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port = urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ struct tty_struct *tty;
+ int result;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (urb->status) {
+ dbg("%s - nonzero read bulk status received: %d",
+ __FUNCTION__, urb->status);
+ /* something happened, so free up the memory for this urb */
+ if (urb->transfer_buffer) {
+ kfree (urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+ }
+ return;
+ }
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+
+ tty = port->tty;
+ if (tty && urb->actual_length) {
+ tty_insert_flip_string (tty, data, urb->actual_length);
+ tty_flip_buffer_push (tty);
+ }
+
+ result = usb_submit_urb (urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
+ __FUNCTION__, result);
+ return;
+}
+
+static void airprime_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port = urb->context;
+ struct airprime_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* free up the transfer buffer, as usb_free_urb() does not do this */
+ kfree (urb->transfer_buffer);
+
+ if (urb->status)
+ dbg("%s - nonzero write bulk status received: %d",
+ __FUNCTION__, urb->status);
+ spin_lock_irqsave(&priv->lock, flags);
+ --priv->outstanding_urbs;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ usb_serial_port_softint(port);
+}
+
+static int airprime_open(struct usb_serial_port *port, struct file *filp)
+{
+ struct airprime_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct urb *urb;
+ char *buffer = NULL;
+ int i;
+ int result = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* initialize our private data structure if it isn't already created */
+ if (!priv) {
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ result = -ENOMEM;
+ goto out;
+ }
+ spin_lock_init(&priv->lock);
+ usb_set_serial_port_data(port, priv);
+ }
+
+ for (i = 0; i < NUM_READ_URBS; ++i) {
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!buffer) {
+ dev_err(&port->dev, "%s - out of memory.\n",
+ __FUNCTION__);
+ result = -ENOMEM;
+ goto errout;
+ }
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ dev_err(&port->dev, "%s - no more urbs?\n",
+ __FUNCTION__);
+ result = -ENOMEM;
+ goto errout;
+ }
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_out_endpointAddress),
+ buffer, buffer_size,
+ airprime_read_bulk_callback, port);
+ result = usb_submit_urb(urb, GFP_KERNEL);
+ if (result) {
+ dev_err(&port->dev,
+ "%s - failed submitting read urb %d for port %d, error %d\n",
+ __FUNCTION__, i, port->number, result);
+ goto errout;
+ }
+ /* remember this urb so we can kill it when the port is closed */
+ priv->read_urbp[i] = urb;
+ }
+ goto out;
+
+ errout:
+ /* some error happened, cancel any submitted urbs and clean up anything that
+ got allocated successfully */
+
+ for ( ; i >= 0; --i) {
+ urb = priv->read_urbp[i];
+ if (urb) {
+ /* This urb was submitted successfully. So we have to
+ cancel it.
+ Unlinking the urb will invoke read_bulk_callback()
+ with an error status, so its transfer buffer will
+ be freed there */
+ if (usb_unlink_urb (urb) != -EINPROGRESS) {
+ /* comments in drivers/usb/core/urb.c say this
+ can only happen if the urb was never submitted,
+ or has completed already.
+ Either way we may have to free the transfer
+ buffer here. */
+ if (urb->transfer_buffer) {
+ kfree (urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+ }
+ }
+ usb_free_urb (urb);
+ }
+ }
+
+ out:
+ return result;
+}
+
+static void airprime_close(struct usb_serial_port *port, struct file * filp)
+{
+ struct airprime_private *priv = usb_get_serial_port_data(port);
+ int i;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* killing the urb will invoke read_bulk_callback() with an error status,
+ so the transfer buffer will be freed there */
+ for (i = 0; i < NUM_READ_URBS; ++i) {
+ usb_kill_urb (priv->read_urbp[i]);
+ usb_free_urb (priv->read_urbp[i]);
+ }
+
+ /* free up private structure */
+ kfree (priv);
+ usb_set_serial_port_data(port, NULL);
+}
+
+static int airprime_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+ struct airprime_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ struct urb *urb;
+ unsigned char *buffer;
+ unsigned long flags;
+ int status;
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->outstanding_urbs > NUM_WRITE_URBS) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dbg("%s - write limit hit\n", __FUNCTION__);
+ return 0;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+ buffer = kmalloc(count, GFP_ATOMIC);
+ if (!buffer) {
+ dev_err(&port->dev, "out of memory\n");
+ return -ENOMEM;
+ }
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_err(&port->dev, "no more free urbs\n");
+ kfree (buffer);
+ return -ENOMEM;
+ }
+ memcpy (buffer, buf, count);
+
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
+
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ port->bulk_out_endpointAddress),
+ buffer, count,
+ airprime_write_bulk_callback, port);
+
+ /* send it down the pipe */
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ dev_err(&port->dev,
+ "%s - usb_submit_urb(write bulk) failed with status = %d\n",
+ __FUNCTION__, status);
+ count = status;
+ kfree (buffer);
+ } else {
+ spin_lock_irqsave(&priv->lock, flags);
+ ++priv->outstanding_urbs;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ /* we are done with this urb, so let the host driver
+ * really free it when it is finished with it */
+ usb_free_urb (urb);
+ return count;
+}
+
static struct usb_driver airprime_driver = {
.name = "airprime",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
- .no_dynamic_id = 1,
+ .no_dynamic_id = 1,
};
static struct usb_serial_driver airprime_device = {
@@ -42,13 +280,17 @@
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
- .num_ports = 1,
+ .open = airprime_open,
+ .close = airprime_close,
+ .write = airprime_write,
};
static int __init airprime_init(void)
{
int retval;
+ airprime_device.num_ports =
+ (endpoints > 0 && endpoints <= MAX_BULK_EPS) ? endpoints : NUM_BULK_EPS;
retval = usb_serial_register(&airprime_device);
if (retval)
return retval;
@@ -60,6 +302,8 @@
static void __exit airprime_exit(void)
{
+ dbg("%s", __FUNCTION__);
+
usb_deregister(&airprime_driver);
usb_serial_deregister(&airprime_device);
}
@@ -67,3 +311,10 @@
module_init(airprime_init);
module_exit(airprime_exit);
MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled");
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers in bytes (default 4096)");
+module_param(endpoints, int, 0);
+MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 970d9ef..ca52f12 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -1,4 +1,7 @@
/*
+ * Copyright (C) 2006
+ * Simon Schulz (ark3116_driver <at> auctionant.de)
+ *
* ark3116
* - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
* productid=0x0232) (used in a datacable called KQ-U8A)
@@ -8,8 +11,6 @@
*
* - based on logs created by usbsnoopy
*
- * Author : Simon Schulz [ark3116_driver<AT>auctionant.de]
- *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -22,6 +23,8 @@
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include <asm/uaccess.h>
static int debug;
@@ -43,10 +46,10 @@
{
int result;
result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev,0),
+ usb_sndctrlpipe(serial->dev, 0),
request, requesttype, value, index,
- NULL,0x00, 1000);
- dbg("%03d > ok",seq);
+ NULL, 0x00, 1000);
+ dbg("%03d > ok", seq);
}
static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
@@ -56,27 +59,25 @@
{
int result;
result = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev,0),
- request, requesttype, value, index,
- buf, 0x0000001, 1000);
+ usb_rcvctrlpipe(serial->dev, 0),
+ request, requesttype, value, index,
+ buf, 0x0000001, 1000);
if (result)
- dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+ dbg("%03d < %d bytes [0x%02X]", seq, result, buf[0]);
else
dbg("%03d < 0 bytes", seq);
}
-
static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
__u8 request, __u8 requesttype,
__u16 value, __u16 index, char *buf)
{
usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev,0),
+ usb_rcvctrlpipe(serial->dev, 0),
request, requesttype, value, index,
buf, 0x0000001, 1000);
}
-
static int ark3116_attach(struct usb_serial *serial)
{
char *buf;
@@ -84,10 +85,10 @@
int i;
for (i = 0; i < serial->num_ports; ++i) {
- priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+ priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL);
if (!priv)
goto cleanup;
- memset (priv, 0x00, sizeof (struct ark3116_private));
+ memset(priv, 0x00, sizeof (struct ark3116_private));
spin_lock_init(&priv->lock);
usb_set_serial_port_data(serial->port[i], priv);
@@ -95,63 +96,62 @@
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
- dbg("error kmalloc -> out of mem ?");
+ dbg("error kmalloc -> out of mem?");
goto cleanup;
}
/* 3 */
- ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
- ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
- ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
- ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+ ARK3116_SND(serial, 3, 0xFE, 0x40, 0x0008, 0x0002);
+ ARK3116_SND(serial, 4, 0xFE, 0x40, 0x0008, 0x0001);
+ ARK3116_SND(serial, 5, 0xFE, 0x40, 0x0000, 0x0008);
+ ARK3116_SND(serial, 6, 0xFE, 0x40, 0x0000, 0x000B);
/* <-- seq7 */
- ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
- ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
- ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
- ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
- ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+ ARK3116_RCV(serial, 7, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
+ ARK3116_SND(serial, 8, 0xFE, 0x40, 0x0080, 0x0003);
+ ARK3116_SND(serial, 9, 0xFE, 0x40, 0x001A, 0x0000);
+ ARK3116_SND(serial, 10, 0xFE, 0x40, 0x0000, 0x0001);
+ ARK3116_SND(serial, 11, 0xFE, 0x40, 0x0000, 0x0003);
/* <-- seq12 */
- ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
- ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+ ARK3116_RCV(serial, 12, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
+ ARK3116_SND(serial, 13, 0xFE, 0x40, 0x0000, 0x0004);
/* 14 */
- ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
- ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+ ARK3116_RCV(serial, 14, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
+ ARK3116_SND(serial, 15, 0xFE, 0x40, 0x0000, 0x0004);
/* 16 */
- ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ ARK3116_RCV(serial, 16, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
/* --> seq17 */
- ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+ ARK3116_SND(serial, 17, 0xFE, 0x40, 0x0001, 0x0004);
/* <-- seq18 */
- ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+ ARK3116_RCV(serial, 18, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
/* --> seq19 */
- ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
-
+ ARK3116_SND(serial, 19, 0xFE, 0x40, 0x0003, 0x0004);
/* <-- seq20 */
- /* seems like serial port status info (RTS, CTS,...) */
- /* returns modem control line status ?! */
- ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+ /* seems like serial port status info (RTS, CTS, ...) */
+ /* returns modem control line status?! */
+ ARK3116_RCV(serial, 20, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
- /* set 9600 baud & do some init ?! */
- ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
- ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
- ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
- ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
- ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
- ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
- ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
- ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+ /* set 9600 baud & do some init?! */
+ ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
+ ARK3116_SND(serial, 148, 0xFE, 0x40, 0x0038, 0x0000);
+ ARK3116_SND(serial, 149, 0xFE, 0x40, 0x0001, 0x0001);
+ ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
+ ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
+ ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
+ ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
+ ARK3116_SND(serial, 154, 0xFE, 0x40, 0x0003, 0x0003);
kfree(buf);
- return(0);
+ return 0;
cleanup:
- for (--i; i>=0; --i)
+ for (--i; i >= 0; --i)
usb_set_serial_port_data(serial->port[i], NULL);
return -ENOMEM;
}
@@ -180,7 +180,8 @@
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(port->tty->termios) = tty_std_termios;
- port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ port->tty->termios->c_cflag = B9600 | CS8
+ | CREAD | HUPCL | CLOCAL;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
@@ -204,8 +205,8 @@
}
/* set data bit count (8/7/6/5) */
- if (cflag & CSIZE){
- switch (cflag & CSIZE){
+ if (cflag & CSIZE) {
+ switch (cflag & CSIZE) {
case CS5:
config |= 0x00;
dbg("setting CS5");
@@ -219,7 +220,8 @@
dbg("setting CS7");
break;
default:
- err ("CSIZE was set but not CS5-CS8, using CS8!");
+ err("CSIZE was set but not CS5-CS8, using CS8!");
+ /* fall through */
case CS8:
config |= 0x03;
dbg("setting CS8");
@@ -227,8 +229,8 @@
}
}
- /* set parity (NONE,EVEN,ODD) */
- if (cflag & PARENB){
+ /* set parity (NONE/EVEN/ODD) */
+ if (cflag & PARENB) {
if (cflag & PARODD) {
config |= 0x08;
dbg("setting parity to ODD");
@@ -240,20 +242,19 @@
dbg("setting parity to NONE");
}
- /* SET STOPBIT (1/2) */
+ /* set stop bit (1/2) */
if (cflag & CSTOPB) {
config |= 0x04;
- dbg ("setting 2 stop bits");
+ dbg("setting 2 stop bits");
} else {
- dbg ("setting 1 stop bit");
+ dbg("setting 1 stop bit");
}
-
- /* set baudrate: */
+ /* set baudrate */
baud = 0;
- switch (cflag & CBAUD){
+ switch (cflag & CBAUD) {
case B0:
- err("can't set 0baud, using 9600 instead");
+ err("can't set 0 baud, using 9600 instead");
break;
case B75: baud = 75; break;
case B150: baud = 150; break;
@@ -285,38 +286,40 @@
*/
if (baud == 460800)
/* strange, for 460800 the formula is wrong
- * (dont use round(), then 9600baud is wrong) */
+ * if using round() then 9600baud is wrong) */
ark3116_baud = 7;
else
ark3116_baud = 3000000 / baud;
/* ? */
- ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+ ARK3116_RCV(serial, 0, 0xFE, 0xC0, 0x0000, 0x0003, 0x03, buf);
+
/* offset = buf[0]; */
/* offset = 0x03; */
- /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
-
+ /* dbg("using 0x%04X as target for 0x0003:", 0x0080 + offset); */
/* set baudrate */
- dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
- ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
- ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000);
- ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
- ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+ dbg("setting baudrate to %d (->reg=%d)", baud, ark3116_baud);
+ ARK3116_SND(serial, 147, 0xFE, 0x40, 0x0083, 0x0003);
+ ARK3116_SND(serial, 148, 0xFE, 0x40,
+ (ark3116_baud & 0x00FF), 0x0000);
+ ARK3116_SND(serial, 149, 0xFE, 0x40,
+ (ark3116_baud & 0xFF00) >> 8, 0x0001);
+ ARK3116_SND(serial, 150, 0xFE, 0x40, 0x0003, 0x0003);
/* ? */
- ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
- ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+ ARK3116_RCV(serial, 151, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
+ ARK3116_SND(serial, 152, 0xFE, 0x40, 0x0000, 0x0003);
/* set data bit count, stop bit count & parity: */
dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
- ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
- ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+ ARK3116_RCV(serial, 153, 0xFE, 0xC0, 0x0000, 0x0003, 0x00, buf);
+ ARK3116_SND(serial, 154, 0xFE, 0x40, config, 0x0003);
if (cflag & CRTSCTS)
- dbg("CRTSCTS not supported by chipset ?!");
+ dbg("CRTSCTS not supported by chipset?!");
- /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+ /* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */
kfree(buf);
return;
@@ -329,11 +332,11 @@
char *buf;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
- dbg("error kmalloc -> out of mem ?");
+ dbg("error kmalloc -> out of mem?");
return -ENOMEM;
}
@@ -342,44 +345,68 @@
return result;
/* open */
- ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+ ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf);
- ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
- ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
- ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
- ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+ ARK3116_SND(serial, 112, 0xFE, 0x40, 0x0082, 0x0003);
+ ARK3116_SND(serial, 113, 0xFE, 0x40, 0x001A, 0x0000);
+ ARK3116_SND(serial, 114, 0xFE, 0x40, 0x0000, 0x0001);
+ ARK3116_SND(serial, 115, 0xFE, 0x40, 0x0002, 0x0003);
- ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
- ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+ ARK3116_RCV(serial, 116, 0xFE, 0xC0, 0x0000, 0x0004, 0x03, buf);
+ ARK3116_SND(serial, 117, 0xFE, 0x40, 0x0002, 0x0004);
- ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
- ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+ ARK3116_RCV(serial, 118, 0xFE, 0xC0, 0x0000, 0x0004, 0x02, buf);
+ ARK3116_SND(serial, 119, 0xFE, 0x40, 0x0000, 0x0004);
- ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ ARK3116_RCV(serial, 120, 0xFE, 0xC0, 0x0000, 0x0004, 0x00, buf);
- ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+ ARK3116_SND(serial, 121, 0xFE, 0x40, 0x0001, 0x0004);
- ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+ ARK3116_RCV(serial, 122, 0xFE, 0xC0, 0x0000, 0x0004, 0x01, buf);
- ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+ ARK3116_SND(serial, 123, 0xFE, 0x40, 0x0003, 0x0004);
- /* returns different values (control lines ?!) */
- ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+ /* returns different values (control lines?!) */
+ ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
- /* initialise termios: */
+ /* initialise termios */
if (port->tty)
ark3116_set_termios(port, &tmp_termios);
kfree(buf);
return result;
-
}
static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
- dbg("ioctl not supported yet...");
+ struct serial_struct serstruct;
+ void __user *user_arg = (void __user *)arg;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ /* XXX: Some of these values are probably wrong. */
+ memset(&serstruct, 0, sizeof (serstruct));
+ serstruct.type = PORT_16654;
+ serstruct.line = port->serial->minor;
+ serstruct.port = port->number;
+ serstruct.custom_divisor = 0;
+ serstruct.baud_base = 460800;
+
+ if (copy_to_user(user_arg, &serstruct, sizeof (serstruct)))
+ return -EFAULT;
+
+ return 0;
+ case TIOCSSERIAL:
+ if (copy_from_user(&serstruct, user_arg, sizeof (serstruct)))
+ return -EFAULT;
+ return 0;
+ default:
+ dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd);
+ break;
+ }
+
return -ENOIOCTLCMD;
}
@@ -389,7 +416,7 @@
char *buf;
char temp;
- /* seems like serial port status info (RTS, CTS,...) is stored
+ /* seems like serial port status info (RTS, CTS, ...) is stored
* in reg(?) 0x0006
* pcb connection point 11 = GND -> sets bit4 of response
* pcb connection point 7 = GND -> sets bit6 of response
@@ -401,16 +428,16 @@
return -ENOMEM;
}
- /* read register: */
- ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+ /* read register */
+ ARK3116_RCV_QUIET(serial, 0xFE, 0xC0, 0x0000, 0x0006, buf);
temp = buf[0];
kfree(buf);
- /* i do not really know if bit4=CTS and bit6=DSR... was just a
- * quick guess !!
+ /* i do not really know if bit4=CTS and bit6=DSR... just a
+ * quick guess!
*/
- return (temp & (1<<4) ? TIOCM_CTS : 0) |
- (temp & (1<<6) ? TIOCM_DSR : 0);
+ return (temp & (1<<4) ? TIOCM_CTS : 0)
+ | (temp & (1<<6) ? TIOCM_DSR : 0);
}
static struct usb_driver ark3116_driver = {
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index ee70fdd..e1173c1 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -129,6 +129,9 @@
int cmd_ctrl; /* always set this to 1 before issuing a command */
struct cypress_buf *buf; /* write buffer */
int write_urb_in_use; /* write urb in use indicator */
+ int write_urb_interval; /* interval to use for write urb */
+ int read_urb_interval; /* interval to use for read urb */
+ int comm_is_ok; /* true if communication is (still) ok */
int termios_initialized;
__u8 line_control; /* holds dtr / rts value */
__u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
@@ -168,6 +171,7 @@
static int cypress_chars_in_buffer (struct usb_serial_port *port);
static void cypress_throttle (struct usb_serial_port *port);
static void cypress_unthrottle (struct usb_serial_port *port);
+static void cypress_set_dead (struct usb_serial_port *port);
static void cypress_read_int_callback (struct urb *urb, struct pt_regs *regs);
static void cypress_write_int_callback (struct urb *urb, struct pt_regs *regs);
/* baud helper functions */
@@ -288,6 +292,9 @@
priv = usb_get_serial_port_data(port);
+ if (!priv->comm_is_ok)
+ return -ENODEV;
+
switch(cypress_request_type) {
case CYPRESS_SET_CONFIG:
@@ -365,13 +372,12 @@
if (tries++ >= 3)
break;
- if (retval == EPIPE)
- usb_clear_halt(port->serial->dev, 0x00);
- } while (retval != 8 && retval != ENODEV);
+ } while (retval != 8 && retval != -ENODEV);
- if (retval != 8)
+ if (retval != 8) {
err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
- else {
+ cypress_set_dead(port);
+ } else {
spin_lock_irqsave(&priv->lock, flags);
priv->baud_rate = new_baudrate;
priv->cbr_mask = baud_mask;
@@ -392,12 +398,11 @@
if (tries++ >= 3)
break;
- if (retval == EPIPE)
- usb_clear_halt(port->serial->dev, 0x00);
- } while (retval != 5 && retval != ENODEV);
+ } while (retval != 5 && retval != -ENODEV);
if (retval != 5) {
err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
+ cypress_set_dead(port);
return retval;
} else {
spin_lock_irqsave(&priv->lock, flags);
@@ -419,6 +424,24 @@
} /* cypress_serial_control */
+static void cypress_set_dead(struct usb_serial_port *port)
+{
+ struct cypress_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!priv->comm_is_ok) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
+ }
+ priv->comm_is_ok = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ err("cypress_m8 suspending failing port %d - interval might be too short",
+ port->number);
+}
+
+
/* given a baud mask, it will return integer baud on success */
static int mask_to_rate (unsigned mask)
{
@@ -472,13 +495,15 @@
static int generic_startup (struct usb_serial *serial)
{
struct cypress_private *priv;
+ struct usb_serial_port *port = serial->port[0];
- dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ priv->comm_is_ok = !0;
spin_lock_init(&priv->lock);
priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
if (priv->buf == NULL) {
@@ -489,13 +514,24 @@
usb_reset_configuration (serial->dev);
- interval = 1;
priv->cmd_ctrl = 0;
priv->line_control = 0;
priv->termios_initialized = 0;
priv->rx_flags = 0;
priv->cbr_mask = B300;
- usb_set_serial_port_data(serial->port[0], priv);
+ if (interval > 0) {
+ priv->write_urb_interval = interval;
+ priv->read_urb_interval = interval;
+ dbg("%s - port %d read & write intervals forced to %d",
+ __FUNCTION__,port->number,interval);
+ } else {
+ priv->write_urb_interval = port->interrupt_out_urb->interval;
+ priv->read_urb_interval = port->interrupt_in_urb->interval;
+ dbg("%s - port %d intervals: read=%d write=%d",
+ __FUNCTION__,port->number,
+ priv->read_urb_interval,priv->write_urb_interval);
+ }
+ usb_set_serial_port_data(port, priv);
return 0;
}
@@ -585,6 +621,9 @@
dbg("%s - port %d", __FUNCTION__, port->number);
+ if (!priv->comm_is_ok)
+ return -EIO;
+
/* clear halts before open */
usb_clear_halt(serial->dev, 0x81);
usb_clear_halt(serial->dev, 0x02);
@@ -624,11 +663,12 @@
usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port, interval);
+ cypress_read_int_callback, port, priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result){
dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ cypress_set_dead(port);
}
return result;
@@ -733,6 +773,9 @@
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
+ if (!priv->comm_is_ok)
+ return;
+
dbg("%s - port %d", __FUNCTION__, port->number);
dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
@@ -806,14 +849,16 @@
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
port->interrupt_out_urb->transfer_buffer);
- port->interrupt_out_urb->transfer_buffer_length = actual_size;
- port->interrupt_out_urb->dev = port->serial->dev;
- port->interrupt_out_urb->interval = interval;
+ usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
+ usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
+ port->interrupt_out_buffer, port->interrupt_out_size,
+ cypress_write_int_callback, port, priv->write_urb_interval);
result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
result);
priv->write_urb_in_use = 0;
+ cypress_set_dead(port);
}
spin_lock_irqsave(&priv->lock, flags);
@@ -1214,13 +1259,18 @@
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
+ if (!priv->comm_is_ok)
+ return;
+
if (actually_throttled) {
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result)
+ if (result) {
dev_err(&port->dev, "%s - failed submitting read urb, "
"error %d\n", __FUNCTION__, result);
+ cypress_set_dead(port);
+ }
}
}
@@ -1240,9 +1290,22 @@
dbg("%s - port %d", __FUNCTION__, port->number);
- if (urb->status) {
- dbg("%s - nonzero read status received: %d", __FUNCTION__,
- urb->status);
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* precursor to disconnect so just go away */
+ return;
+ case -EPIPE:
+ usb_clear_halt(port->serial->dev,0x81);
+ break;
+ default:
+ /* something ugly is going on... */
+ dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
+ __FUNCTION__,urb->status);
+ cypress_set_dead(port);
return;
}
@@ -1343,18 +1406,20 @@
/* Continue trying to always read... unless the port has closed. */
- if (port->open_count > 0) {
+ if (port->open_count > 0 && priv->comm_is_ok) {
usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
usb_rcvintpipe(port->serial->dev,
port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port, interval);
+ cypress_read_int_callback, port, priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result)
+ if (result) {
dev_err(&urb->dev->dev, "%s - failed resubmitting "
"read urb, error %d\n", __FUNCTION__,
result);
+ cypress_set_dead(port);
+ }
}
return;
@@ -1380,20 +1445,26 @@
dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
priv->write_urb_in_use = 0;
return;
- case -EPIPE: /* no break needed */
+ case -EPIPE: /* no break needed; clear halt and resubmit */
+ if (!priv->comm_is_ok)
+ break;
usb_clear_halt(port->serial->dev, 0x02);
- default:
/* error in the urb, so we have to resubmit it */
- dbg("%s - Overflow in write", __FUNCTION__);
dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
port->interrupt_out_urb->transfer_buffer_length = 1;
port->interrupt_out_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
- __FUNCTION__, result);
- else
+ if (!result)
return;
+ dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
+ __FUNCTION__, result);
+ cypress_set_dead(port);
+ break;
+ default:
+ dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
+ __FUNCTION__,urb->status);
+ cypress_set_dead(port);
+ break;
}
priv->write_urb_in_use = 0;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c6115aa..1f7b725 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1101,25 +1101,29 @@
static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
-static void create_sysfs_attrs(struct usb_serial *serial)
-{
+static int create_sysfs_attrs(struct usb_serial *serial)
+{
struct ftdi_private *priv;
struct usb_device *udev;
+ int retval = 0;
dbg("%s",__FUNCTION__);
-
+
priv = usb_get_serial_port_data(serial->port[0]);
udev = serial->dev;
-
+
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
if (priv->chip_type != SIO) {
dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
- device_create_file(&udev->dev, &dev_attr_event_char);
- if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
- device_create_file(&udev->dev, &dev_attr_latency_timer);
+ retval = device_create_file(&udev->dev, &dev_attr_event_char);
+ if ((!retval) &&
+ (priv->chip_type == FT232BM || priv->chip_type == FT2232C)) {
+ retval = device_create_file(&udev->dev,
+ &dev_attr_latency_timer);
}
}
+ return retval;
}
static void remove_sysfs_attrs(struct usb_serial *serial)
@@ -1162,7 +1166,8 @@
struct usb_serial_port *port = serial->port[0];
struct ftdi_private *priv;
struct ftdi_sio_quirk *quirk;
-
+ int retval;
+
dbg("%s",__FUNCTION__);
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
@@ -1203,15 +1208,18 @@
usb_set_serial_port_data(serial->port[0], priv);
ftdi_determine_type (serial->port[0]);
- create_sysfs_attrs(serial);
+ retval = create_sysfs_attrs(serial);
+ if (retval)
+ dev_err(&serial->dev->dev, "Error creating sysfs files, "
+ "continuing\n");
/* Check for device requiring special set up. */
quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial);
if (quirk && quirk->setup) {
quirk->setup(serial);
}
-
- return (0);
+
+ return 0;
} /* ftdi_sio_attach */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 7278526..4b1196a 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1,7 +1,7 @@
/*
* Garmin GPS driver
*
- * Copyright (C) 2004 Hermann Kneissel herkne@users.sourceforge.net
+ * Copyright (C) 2006 Hermann Kneissel herkne@users.sourceforge.net
*
* The latest version of the driver can be found at
* http://sourceforge.net/projects/garmin-gps/
@@ -37,6 +37,8 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/version.h>
+
/* the mode to be set when the port ist opened */
static int initial_mode = 1;
@@ -50,7 +52,7 @@
*/
#define VERSION_MAJOR 0
-#define VERSION_MINOR 23
+#define VERSION_MINOR 28
#define _STR(s) #s
#define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b)
@@ -164,7 +166,8 @@
#define FLAGS_SESSION_REPLY1_SEEN 0x0080
#define FLAGS_SESSION_REPLY2_SEEN 0x0040
#define FLAGS_BULK_IN_ACTIVE 0x0020
-#define FLAGS_THROTTLED 0x0010
+#define FLAGS_BULK_IN_RESTART 0x0010
+#define FLAGS_THROTTLED 0x0008
#define CLEAR_HALT_REQUIRED 0x0001
#define FLAGS_QUEUING 0x0100
@@ -224,7 +227,7 @@
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
- .no_dynamic_id = 1,
+ .no_dynamic_id = 1,
};
@@ -270,7 +273,7 @@
static void send_to_tty(struct usb_serial_port *port,
- char *data, unsigned int actual_length)
+ char *data, unsigned int actual_length)
{
struct tty_struct *tty = port->tty;
@@ -294,15 +297,15 @@
* queue a received (usb-)packet for later processing
*/
static int pkt_add(struct garmin_data * garmin_data_p,
- unsigned char *data, unsigned int data_length)
+ unsigned char *data, unsigned int data_length)
{
+ int state = 0;
int result = 0;
unsigned long flags;
struct garmin_packet *pkt;
/* process only packets containg data ... */
if (data_length) {
- garmin_data_p->flags |= FLAGS_QUEUING;
pkt = kmalloc(sizeof(struct garmin_packet)+data_length,
GFP_ATOMIC);
if (pkt == NULL) {
@@ -313,14 +316,16 @@
memcpy(pkt->data, data, data_length);
spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags |= FLAGS_QUEUING;
result = list_empty(&garmin_data_p->pktlist);
pkt->seq = garmin_data_p->seq_counter++;
list_add_tail(&pkt->list, &garmin_data_p->pktlist);
+ state = garmin_data_p->state;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* in serial mode, if someone is waiting for data from
the device, iconvert and send the next packet to tty. */
- if (result && (garmin_data_p->state == STATE_GSP_WAIT_DATA)) {
+ if (result && (state == STATE_GSP_WAIT_DATA)) {
gsp_next_packet(garmin_data_p);
}
}
@@ -370,9 +375,9 @@
static int gsp_send_ack(struct garmin_data * garmin_data_p, __u8 pkt_id)
{
__u8 pkt[10];
- __u8 cksum = 0;
- __u8 *ptr = pkt;
- unsigned l = 0;
+ __u8 cksum = 0;
+ __u8 *ptr = pkt;
+ unsigned l = 0;
dbg("%s - pkt-id: 0x%X.", __FUNCTION__, 0xFF & pkt_id);
@@ -416,7 +421,7 @@
static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count)
{
const __u8* recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET;
- __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer;
+ __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer;
int cksum = 0;
int n = 0;
@@ -447,11 +452,11 @@
n++;
}
- if ((0xff & (cksum + *recpkt)) != 0) {
- dbg("%s - invalid checksum, expected %02x, got %02x",
- __FUNCTION__, 0xff & -cksum, 0xff & *recpkt);
- return -EINVPKT;
- }
+ if ((0xff & (cksum + *recpkt)) != 0) {
+ dbg("%s - invalid checksum, expected %02x, got %02x",
+ __FUNCTION__, 0xff & -cksum, 0xff & *recpkt);
+ return -EINVPKT;
+ }
usbdata[0] = __cpu_to_le32(GARMIN_LAYERID_APPL);
usbdata[1] = __cpu_to_le32(pktid);
@@ -491,20 +496,28 @@
*/
static int gsp_receive(struct garmin_data * garmin_data_p,
- const unsigned char *buf, int count)
+ const unsigned char *buf, int count)
{
+ unsigned long flags;
int offs = 0;
int ack_or_nak_seen = 0;
int i = 0;
- __u8 *dest = garmin_data_p->inbuffer;
- int size = garmin_data_p->insize;
+ __u8 *dest;
+ int size;
// dleSeen: set if last byte read was a DLE
- int dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN;
+ int dleSeen;
// skip: if set, skip incoming data until possible start of
// new packet
- int skip = garmin_data_p->flags & FLAGS_GSP_SKIP;
+ int skip;
__u8 data;
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ dest = garmin_data_p->inbuffer;
+ size = garmin_data_p->insize;
+ dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN;
+ skip = garmin_data_p->flags & FLAGS_GSP_SKIP;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
dbg("%s - dle=%d skip=%d size=%d count=%d",
__FUNCTION__, dleSeen, skip, size, count);
@@ -572,6 +585,8 @@
}
}
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+
garmin_data_p->insize = size;
// copy flags back to structure
@@ -587,6 +602,11 @@
if (ack_or_nak_seen) {
garmin_data_p->state = STATE_GSP_WAIT_DATA;
+ }
+
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+
+ if (ack_or_nak_seen) {
gsp_next_packet(garmin_data_p);
}
@@ -676,7 +696,7 @@
src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH;
if (k > (GARMIN_PKTHDR_LENGTH-2)) {
/* can't add stuffing DLEs in place, move data to end
- of buffer ... */
+ of buffer ... */
dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen;
memcpy(dst, src, datalen);
src = dst;
@@ -755,8 +775,9 @@
* or even incomplete packets
*/
static int nat_receive(struct garmin_data * garmin_data_p,
- const unsigned char *buf, int count)
+ const unsigned char *buf, int count)
{
+ unsigned long flags;
__u8 * dest;
int offs = 0;
int result = count;
@@ -803,7 +824,9 @@
/* if this was an abort-transfer command,
flush all queued data. */
if (isAbortTrfCmnd(garmin_data_p->inbuffer)) {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_DROP_DATA;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
pkt_clear(garmin_data_p);
}
}
@@ -839,12 +862,15 @@
static int process_resetdev_request(struct usb_serial_port *port)
{
+ unsigned long flags;
int status;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED);
garmin_data_p->state = STATE_RESET;
garmin_data_p->serial_num = 0;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
usb_kill_urb (port->interrupt_in_urb);
dbg("%s - usb_reset_device", __FUNCTION__ );
@@ -862,6 +888,7 @@
*/
static int garmin_clear(struct garmin_data * garmin_data_p)
{
+ unsigned long flags;
int status = 0;
struct usb_serial_port *port = garmin_data_p->port;
@@ -875,8 +902,10 @@
/* flush all queued data */
pkt_clear(garmin_data_p);
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->insize = 0;
garmin_data_p->outsize = 0;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
return status;
}
@@ -888,6 +917,7 @@
static int garmin_init_session(struct usb_serial_port *port)
{
+ unsigned long flags;
struct usb_serial *serial = port->serial;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
int status = 0;
@@ -913,7 +943,9 @@
if (status >= 0) {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->ignorePkts++;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* not needed, but the win32 driver does it too ... */
status = garmin_write_bulk(port,
@@ -921,7 +953,9 @@
sizeof(GARMIN_START_SESSION_REQ2));
if (status >= 0) {
status = 0;
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->ignorePkts++;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
}
}
}
@@ -935,6 +969,7 @@
static int garmin_open (struct usb_serial_port *port, struct file *filp)
{
+ unsigned long flags;
int status = 0;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -948,9 +983,11 @@
if (port->tty)
port->tty->low_latency = 1;
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->mode = initial_mode;
garmin_data_p->count = 0;
garmin_data_p->flags = 0;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* shutdown any bulk reads that might be going on */
usb_kill_urb (port->write_urb);
@@ -996,6 +1033,7 @@
static void garmin_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
+ unsigned long flags;
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1007,7 +1045,9 @@
if (urb->status) {
dbg("%s - nonzero write bulk status received: %d",
__FUNCTION__, urb->status);
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
}
usb_serial_port_softint(port);
@@ -1015,8 +1055,9 @@
static int garmin_write_bulk (struct usb_serial_port *port,
- const unsigned char *buf, int count)
+ const unsigned char *buf, int count)
{
+ unsigned long flags;
struct usb_serial *serial = port->serial;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
struct urb *urb;
@@ -1026,7 +1067,9 @@
dbg("%s - port %d, state %d", __FUNCTION__, port->number,
garmin_data_p->state);
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_DROP_DATA;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
buffer = kmalloc (count, GFP_ATOMIC);
if (!buffer) {
@@ -1053,7 +1096,9 @@
urb->transfer_flags |= URB_ZERO_PACKET;
if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_APP_REQ_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
pkt_clear(garmin_data_p);
garmin_data_p->state = STATE_GSP_WAIT_DATA;
@@ -1087,8 +1132,9 @@
static int garmin_write (struct usb_serial_port *port,
- const unsigned char *buf, int count)
+ const unsigned char *buf, int count)
{
+ unsigned long flags;
int pktid, pktsiz, len;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
__le32 *privpkt = (__le32 *)garmin_data_p->privpkt;
@@ -1139,7 +1185,9 @@
break;
case PRIV_PKTID_RESET_REQ:
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_APP_REQ_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
break;
case PRIV_PKTID_SET_DEF_MODE:
@@ -1155,6 +1203,8 @@
}
}
+ garmin_data_p->ignorePkts = 0;
+
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
return gsp_receive(garmin_data_p, buf, count);
} else { /* MODE_NATIVE */
@@ -1177,10 +1227,10 @@
{
/*
* Report back the number of bytes currently in our input buffer.
- * Will this lock up the driver - the buffer contains an incomplete
- * package which will not be written to the device until it
- * has been completed ?
- */
+ * Will this lock up the driver - the buffer contains an incomplete
+ * package which will not be written to the device until it
+ * has been completed ?
+ */
//struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
//return garmin_data_p->insize;
return 0;
@@ -1190,6 +1240,8 @@
static void garmin_read_process(struct garmin_data * garmin_data_p,
unsigned char *data, unsigned data_length)
{
+ unsigned long flags;
+
if (garmin_data_p->flags & FLAGS_DROP_DATA) {
/* abort-transfer cmd is actice */
dbg("%s - pkt dropped", __FUNCTION__);
@@ -1200,11 +1252,14 @@
if a reset is required or not when closing
the device */
if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY,
- sizeof(GARMIN_APP_LAYER_REPLY)))
+ sizeof(GARMIN_APP_LAYER_REPLY))) {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_APP_RESP_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+ }
/* if throttling is active or postprecessing is required
- put the received data in th input queue, otherwise
+ put the received data in the input queue, otherwise
send it directly to the tty port */
if (garmin_data_p->flags & FLAGS_QUEUING) {
pkt_add(garmin_data_p, data, data_length);
@@ -1221,6 +1276,7 @@
static void garmin_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
+ unsigned long flags;
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct usb_serial *serial = port->serial;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1245,19 +1301,30 @@
garmin_read_process(garmin_data_p, data, urb->actual_length);
- /* Continue trying to read until nothing more is received */
- if (urb->actual_length > 0) {
- usb_fill_bulk_urb (port->read_urb, serial->dev,
- usb_rcvbulkpipe (serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- garmin_read_bulk_callback, port);
+ if (urb->actual_length == 0 &&
+ 0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (status)
dev_err(&port->dev,
"%s - failed resubmitting read urb, error %d\n",
__FUNCTION__, status);
+ } else if (urb->actual_length > 0) {
+ /* Continue trying to read until nothing more is received */
+ if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) {
+ status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ if (status)
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __FUNCTION__, status);
+ }
+ } else {
+ dbg("%s - end of bulk data", __FUNCTION__);
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
}
return;
}
@@ -1265,6 +1332,7 @@
static void garmin_read_int_callback (struct urb *urb, struct pt_regs *regs)
{
+ unsigned long flags;
int status;
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct usb_serial *serial = port->serial;
@@ -1297,25 +1365,41 @@
dbg("%s - bulk data available.", __FUNCTION__);
- /* bulk data available */
- usb_fill_bulk_urb (port->read_urb, serial->dev,
- usb_rcvbulkpipe (serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- garmin_read_bulk_callback, port);
- status = usb_submit_urb(port->read_urb, GFP_KERNEL);
- if (status) {
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
- __FUNCTION__, status);
+ if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+
+ /* bulk data available */
+ usb_fill_bulk_urb (port->read_urb, serial->dev,
+ usb_rcvbulkpipe (serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ garmin_read_bulk_callback, port);
+ status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ if (status) {
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __FUNCTION__, status);
+ } else {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE;
+ /* do not send this packet to the user */
+ garmin_data_p->ignorePkts = 1;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+ }
+ } else {
+ /* bulk-in transfer still active */
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
+ garmin_data_p->flags |= FLAGS_BULK_IN_RESTART;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
}
} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
&& 0 == memcmp(data, GARMIN_START_SESSION_REPLY,
sizeof(GARMIN_START_SESSION_REPLY))) {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* save the serial number */
garmin_data_p->serial_num
@@ -1330,7 +1414,9 @@
ignore it. */
dbg("%s - pkt ignored (%d)",
__FUNCTION__, garmin_data_p->ignorePkts);
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->ignorePkts--;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
} else {
garmin_read_process(garmin_data_p, data, urb->actual_length);
}
@@ -1351,18 +1437,20 @@
*/
static int garmin_flush_queue(struct garmin_data * garmin_data_p)
{
+ unsigned long flags;
struct garmin_packet *pkt;
if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
pkt = pkt_pop(garmin_data_p);
if (pkt != NULL) {
-
send_to_tty(garmin_data_p->port, pkt->data, pkt->size);
kfree(pkt);
mod_timer(&garmin_data_p->timer, (1)+jiffies);
} else {
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_QUEUING;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
}
}
return 0;
@@ -1371,26 +1459,41 @@
static void garmin_throttle (struct usb_serial_port *port)
{
+ unsigned long flags;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
dbg("%s - port %d", __FUNCTION__, port->number);
/* set flag, data received will be put into a queue
for later processing */
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
}
static void garmin_unthrottle (struct usb_serial_port *port)
{
+ unsigned long flags;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+ int status;
dbg("%s - port %d", __FUNCTION__, port->number);
+ spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_THROTTLED;
+ spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* in native mode send queued data to tty, in
serial mode nothing needs to be done here */
if (garmin_data_p->mode == MODE_NATIVE)
garmin_flush_queue(garmin_data_p);
+
+ if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+ status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ if (status)
+ dev_err(&port->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __FUNCTION__, status);
+ }
}
@@ -1420,11 +1523,12 @@
dbg("%s", __FUNCTION__);
- garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
+ garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL);
if (garmin_data_p == NULL) {
dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__);
return -ENOMEM;
}
+ memset (garmin_data_p, 0, sizeof(struct garmin_data));
init_timer(&garmin_data_p->timer);
spin_lock_init(&garmin_data_p->lock);
INIT_LIST_HEAD(&garmin_data_p->pktlist);
@@ -1459,10 +1563,10 @@
/* All of the device info needed */
static struct usb_serial_driver garmin_device = {
.driver = {
- .owner = THIS_MODULE,
- .name = "garmin_gps",
+ .owner = THIS_MODULE,
+ .name = "garmin_gps",
},
- .description = "Garmin GPS usb/tty",
+ .description = "Garmin GPS usb/tty",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -1483,6 +1587,7 @@
};
+
static int __init garmin_init (void)
{
int retval;
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 9840bad..bfc6998 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -652,11 +652,6 @@
port->bulk_out_size = port->write_urb->transfer_buffer_length = URBDATA_SIZE;
msleep(1000*initial_wait);
- /* Start reading from the device */
- usb_fill_bulk_urb(port->read_urb, serial->dev,
- usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
- ipaq_read_bulk_callback, port);
/*
* Send out control message observed in win98 sniffs. Not sure what
@@ -670,18 +665,31 @@
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
0x1, 0, NULL, 0, 100);
- if (result == 0) {
- result = usb_submit_urb(port->read_urb, GFP_KERNEL);
- if (result) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
- goto error;
- }
- return 0;
- }
+ if (!result)
+ break;
+
msleep(1000);
}
- err("%s - failed doing control urb, error %d", __FUNCTION__, result);
- goto error;
+
+ if (!retries && result) {
+ err("%s - failed doing control urb, error %d", __FUNCTION__,
+ result);
+ goto error;
+ }
+
+ /* Start reading from the device */
+ usb_fill_bulk_urb(port->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
+ ipaq_read_bulk_callback, port);
+
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+ if (result) {
+ err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+ goto error;
+ }
+
+ return 0;
enomem:
result = -ENOMEM;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
new file mode 100644
index 0000000..95bf571
--- /dev/null
+++ b/drivers/usb/serial/mos7840.c
@@ -0,0 +1,2962 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Clean ups from Moschip version and a few ioctl implementations by:
+ * Paul B Schroeder <pschroeder "at" uplogix "dot" com>
+ *
+ * Originally based on drivers/usb/serial/io_edgeport.c which is:
+ * Copyright (C) 2000 Inside Out Networks, All rights reserved.
+ * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <asm/uaccess.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "1.3.1"
+#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
+
+/*
+ * 16C50 UART register defines
+ */
+
+#define LCR_BITS_5 0x00 /* 5 bits/char */
+#define LCR_BITS_6 0x01 /* 6 bits/char */
+#define LCR_BITS_7 0x02 /* 7 bits/char */
+#define LCR_BITS_8 0x03 /* 8 bits/char */
+#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
+
+#define LCR_STOP_1 0x00 /* 1 stop bit */
+#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */
+#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */
+#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */
+
+#define LCR_PAR_NONE 0x00 /* No parity */
+#define LCR_PAR_ODD 0x08 /* Odd parity */
+#define LCR_PAR_EVEN 0x18 /* Even parity */
+#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */
+#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */
+#define LCR_PAR_MASK 0x38 /* Mask for parity field */
+
+#define LCR_SET_BREAK 0x40 /* Set Break condition */
+#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */
+
+#define MCR_DTR 0x01 /* Assert DTR */
+#define MCR_RTS 0x02 /* Assert RTS */
+#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */
+#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */
+#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */
+#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */
+
+#define MOS7840_MSR_CTS 0x10 /* Current state of CTS */
+#define MOS7840_MSR_DSR 0x20 /* Current state of DSR */
+#define MOS7840_MSR_RI 0x40 /* Current state of RI */
+#define MOS7840_MSR_CD 0x80 /* Current state of CD */
+
+/*
+ * Defines used for sending commands to port
+ */
+
+#define WAIT_FOR_EVER (HZ * 0 ) /* timeout urb is wait for ever */
+#define MOS_WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
+
+#define MOS_PORT1 0x0200
+#define MOS_PORT2 0x0300
+#define MOS_VENREG 0x0000
+#define MOS_MAX_PORT 0x02
+#define MOS_WRITE 0x0E
+#define MOS_READ 0x0D
+
+/* Requests */
+#define MCS_RD_RTYPE 0xC0
+#define MCS_WR_RTYPE 0x40
+#define MCS_RDREQ 0x0D
+#define MCS_WRREQ 0x0E
+#define MCS_CTRL_TIMEOUT 500
+#define VENDOR_READ_LENGTH (0x01)
+
+#define MAX_NAME_LEN 64
+
+#define ZLP_REG1 0x3A //Zero_Flag_Reg1 58
+#define ZLP_REG5 0x3E //Zero_Flag_Reg5 62
+
+/* For higher baud Rates use TIOCEXBAUD */
+#define TIOCEXBAUD 0x5462
+
+/* vendor id and device id defines */
+
+#define USB_VENDOR_ID_MOSCHIP 0x9710
+#define MOSCHIP_DEVICE_ID_7840 0x7840
+#define MOSCHIP_DEVICE_ID_7820 0x7820
+
+/* Interrupt Rotinue Defines */
+
+#define SERIAL_IIR_RLS 0x06
+#define SERIAL_IIR_MS 0x00
+
+/*
+ * Emulation of the bit mask on the LINE STATUS REGISTER.
+ */
+#define SERIAL_LSR_DR 0x0001
+#define SERIAL_LSR_OE 0x0002
+#define SERIAL_LSR_PE 0x0004
+#define SERIAL_LSR_FE 0x0008
+#define SERIAL_LSR_BI 0x0010
+
+#define MOS_MSR_DELTA_CTS 0x10
+#define MOS_MSR_DELTA_DSR 0x20
+#define MOS_MSR_DELTA_RI 0x40
+#define MOS_MSR_DELTA_CD 0x80
+
+// Serial Port register Address
+#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01))
+#define FIFO_CONTROL_REGISTER ((__u16)(0x02))
+#define LINE_CONTROL_REGISTER ((__u16)(0x03))
+#define MODEM_CONTROL_REGISTER ((__u16)(0x04))
+#define LINE_STATUS_REGISTER ((__u16)(0x05))
+#define MODEM_STATUS_REGISTER ((__u16)(0x06))
+#define SCRATCH_PAD_REGISTER ((__u16)(0x07))
+#define DIVISOR_LATCH_LSB ((__u16)(0x00))
+#define DIVISOR_LATCH_MSB ((__u16)(0x01))
+
+#define CLK_MULTI_REGISTER ((__u16)(0x02))
+#define CLK_START_VALUE_REGISTER ((__u16)(0x03))
+
+#define SERIAL_LCR_DLAB ((__u16)(0x0080))
+
+/*
+ * URB POOL related defines
+ */
+#define NUM_URBS 16 /* URB Count */
+#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
+
+
+static struct usb_device_id moschip_port_id_table[] = {
+ {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
+ {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
+ {} /* terminating entry */
+};
+
+static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
+ {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
+ {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
+ {} /* terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, moschip_id_table_combined);
+
+/* This structure holds all of the local port information */
+
+struct moschip_port {
+ int port_num; /*Actual port number in the device(1,2,etc) */
+ struct urb *write_urb; /* write URB for this port */
+ struct urb *read_urb; /* read URB for this port */
+ __u8 shadowLCR; /* last LCR value received */
+ __u8 shadowMCR; /* last MCR value received */
+ char open;
+ wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
+ wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
+ int delta_msr_cond;
+ struct async_icount icount;
+ struct usb_serial_port *port; /* loop back to the owner of this object */
+
+ /*Offsets */
+ __u8 SpRegOffset;
+ __u8 ControlRegOffset;
+ __u8 DcrRegOffset;
+ //for processing control URBS in interrupt context
+ struct urb *control_urb;
+ char *ctrl_buf;
+ int MsrLsr;
+
+ struct urb *write_urb_pool[NUM_URBS];
+};
+
+
+static int debug;
+static int mos7840_num_ports; //this says the number of ports in the device
+static int mos7840_num_open_ports;
+
+
+/*
+ * mos7840_set_reg_sync
+ * To set the Control register by calling usb_fill_control_urb function
+ * by passing usb_sndctrlpipe function as parameter.
+ */
+
+static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
+ __u16 val)
+{
+ struct usb_device *dev = port->serial->dev;
+ val = val & 0x00ff;
+ dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
+
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
+ MCS_WR_RTYPE, val, reg, NULL, 0,
+ MOS_WDR_TIMEOUT);
+}
+
+/*
+ * mos7840_get_reg_sync
+ * To set the Uart register by calling usb_fill_control_urb function by
+ * passing usb_rcvctrlpipe function as parameter.
+ */
+
+static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
+ __u16 * val)
+{
+ struct usb_device *dev = port->serial->dev;
+ int ret = 0;
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
+ MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
+ MOS_WDR_TIMEOUT);
+ dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val);
+ *val = (*val) & 0x00ff;
+ return ret;
+}
+
+/*
+ * mos7840_set_uart_reg
+ * To set the Uart register by calling usb_fill_control_urb function by
+ * passing usb_sndctrlpipe function as parameter.
+ */
+
+static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
+ __u16 val)
+{
+
+ struct usb_device *dev = port->serial->dev;
+ val = val & 0x00ff;
+ // For the UART control registers, the application number need to be Or'ed
+ if (mos7840_num_ports == 4) {
+ val |=
+ (((__u16) port->number - (__u16) (port->serial->minor)) +
+ 1) << 8;
+ dbg("mos7840_set_uart_reg application number is %x\n", val);
+ } else {
+ if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
+ val |=
+ (((__u16) port->number -
+ (__u16) (port->serial->minor)) + 1) << 8;
+ dbg("mos7840_set_uart_reg application number is %x\n",
+ val);
+ } else {
+ val |=
+ (((__u16) port->number -
+ (__u16) (port->serial->minor)) + 2) << 8;
+ dbg("mos7840_set_uart_reg application number is %x\n",
+ val);
+ }
+ }
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
+ MCS_WR_RTYPE, val, reg, NULL, 0,
+ MOS_WDR_TIMEOUT);
+
+}
+
+/*
+ * mos7840_get_uart_reg
+ * To set the Control register by calling usb_fill_control_urb function
+ * by passing usb_rcvctrlpipe function as parameter.
+ */
+static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
+ __u16 * val)
+{
+ struct usb_device *dev = port->serial->dev;
+ int ret = 0;
+ __u16 Wval;
+
+ //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8);
+ /*Wval is same as application number */
+ if (mos7840_num_ports == 4) {
+ Wval =
+ (((__u16) port->number - (__u16) (port->serial->minor)) +
+ 1) << 8;
+ dbg("mos7840_get_uart_reg application number is %x\n", Wval);
+ } else {
+ if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
+ Wval =
+ (((__u16) port->number -
+ (__u16) (port->serial->minor)) + 1) << 8;
+ dbg("mos7840_get_uart_reg application number is %x\n",
+ Wval);
+ } else {
+ Wval =
+ (((__u16) port->number -
+ (__u16) (port->serial->minor)) + 2) << 8;
+ dbg("mos7840_get_uart_reg application number is %x\n",
+ Wval);
+ }
+ }
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
+ MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH,
+ MOS_WDR_TIMEOUT);
+ *val = (*val) & 0x00ff;
+ return ret;
+}
+
+static void mos7840_dump_serial_port(struct moschip_port *mos7840_port)
+{
+
+ dbg("***************************************\n");
+ dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
+ dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset);
+ dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset);
+ dbg("***************************************\n");
+
+}
+
+/************************************************************************/
+/************************************************************************/
+/* I N T E R F A C E F U N C T I O N S */
+/* I N T E R F A C E F U N C T I O N S */
+/************************************************************************/
+/************************************************************************/
+
+static inline void mos7840_set_port_private(struct usb_serial_port *port,
+ struct moschip_port *data)
+{
+ usb_set_serial_port_data(port, (void *)data);
+}
+
+static inline struct moschip_port *mos7840_get_port_private(struct
+ usb_serial_port
+ *port)
+{
+ return (struct moschip_port *)usb_get_serial_port_data(port);
+}
+
+static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
+{
+ struct moschip_port *mos7840_port;
+ struct async_icount *icount;
+ mos7840_port = port;
+ icount = &mos7840_port->icount;
+ if (new_msr &
+ (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI |
+ MOS_MSR_DELTA_CD)) {
+ icount = &mos7840_port->icount;
+
+ /* update input line counters */
+ if (new_msr & MOS_MSR_DELTA_CTS) {
+ icount->cts++;
+ }
+ if (new_msr & MOS_MSR_DELTA_DSR) {
+ icount->dsr++;
+ }
+ if (new_msr & MOS_MSR_DELTA_CD) {
+ icount->dcd++;
+ }
+ if (new_msr & MOS_MSR_DELTA_RI) {
+ icount->rng++;
+ }
+ }
+
+ return 0;
+}
+
+static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
+{
+ struct async_icount *icount;
+
+ dbg("%s - %02x", __FUNCTION__, new_lsr);
+
+ if (new_lsr & SERIAL_LSR_BI) {
+ //
+ // Parity and Framing errors only count if they
+ // occur exclusive of a break being
+ // received.
+ //
+ new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
+ }
+
+ /* update input line counters */
+ icount = &port->icount;
+ if (new_lsr & SERIAL_LSR_BI) {
+ icount->brk++;
+ }
+ if (new_lsr & SERIAL_LSR_OE) {
+ icount->overrun++;
+ }
+ if (new_lsr & SERIAL_LSR_PE) {
+ icount->parity++;
+ }
+ if (new_lsr & SERIAL_LSR_FE) {
+ icount->frame++;
+ }
+
+ return 0;
+}
+
+/************************************************************************/
+/************************************************************************/
+/* U S B C A L L B A C K F U N C T I O N S */
+/* U S B C A L L B A C K F U N C T I O N S */
+/************************************************************************/
+/************************************************************************/
+
+static void mos7840_control_callback(struct urb *urb, struct pt_regs *regs)
+{
+ unsigned char *data;
+ struct moschip_port *mos7840_port;
+ __u8 regval = 0x0;
+
+ if (!urb) {
+ dbg("%s", "Invalid Pointer !!!!:\n");
+ return;
+ }
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ urb->status);
+ goto exit;
+ }
+
+ mos7840_port = (struct moschip_port *)urb->context;
+
+ dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length);
+ dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__,
+ mos7840_port->MsrLsr, mos7840_port->port_num);
+ data = urb->transfer_buffer;
+ regval = (__u8) data[0];
+ dbg("%s data is %x\n", __FUNCTION__, regval);
+ if (mos7840_port->MsrLsr == 0)
+ mos7840_handle_new_msr(mos7840_port, regval);
+ else if (mos7840_port->MsrLsr == 1)
+ mos7840_handle_new_lsr(mos7840_port, regval);
+
+ exit:
+ return;
+}
+
+static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
+ __u16 * val)
+{
+ struct usb_device *dev = mcs->port->serial->dev;
+ struct usb_ctrlrequest *dr = NULL;
+ unsigned char *buffer = NULL;
+ int ret = 0;
+ buffer = (__u8 *) mcs->ctrl_buf;
+
+// dr=(struct usb_ctrlrequest *)(buffer);
+ dr = (void *)(buffer + 2);
+ dr->bRequestType = MCS_RD_RTYPE;
+ dr->bRequest = MCS_RDREQ;
+ dr->wValue = cpu_to_le16(Wval); //0;
+ dr->wIndex = cpu_to_le16(reg);
+ dr->wLength = cpu_to_le16(2);
+
+ usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0),
+ (unsigned char *)dr, buffer, 2,
+ mos7840_control_callback, mcs);
+ mcs->control_urb->transfer_buffer_length = 2;
+ ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+ return ret;
+}
+
+/*****************************************************************************
+ * mos7840_interrupt_callback
+ * this is the callback function for when we have received data on the
+ * interrupt endpoint.
+ *****************************************************************************/
+
+static void mos7840_interrupt_callback(struct urb *urb, struct pt_regs *regs)
+{
+ int result;
+ int length;
+ struct moschip_port *mos7840_port;
+ struct usb_serial *serial;
+ __u16 Data;
+ unsigned char *data;
+ __u8 sp[5], st;
+ int i;
+ __u16 wval;
+
+ dbg("%s", " : Entering\n");
+ if (!urb) {
+ dbg("%s", "Invalid Pointer !!!!:\n");
+ return;
+ }
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ urb->status);
+ goto exit;
+ }
+
+ length = urb->actual_length;
+ data = urb->transfer_buffer;
+
+ serial = (struct usb_serial *)urb->context;
+
+ /* Moschip get 5 bytes
+ * Byte 1 IIR Port 1 (port.number is 0)
+ * Byte 2 IIR Port 2 (port.number is 1)
+ * Byte 3 IIR Port 3 (port.number is 2)
+ * Byte 4 IIR Port 4 (port.number is 3)
+ * Byte 5 FIFO status for both */
+
+ if (length && length > 5) {
+ dbg("%s \n", "Wrong data !!!");
+ return;
+ }
+
+ sp[0] = (__u8) data[0];
+ sp[1] = (__u8) data[1];
+ sp[2] = (__u8) data[2];
+ sp[3] = (__u8) data[3];
+ st = (__u8) data[4];
+
+ for (i = 0; i < serial->num_ports; i++) {
+ mos7840_port = mos7840_get_port_private(serial->port[i]);
+ wval =
+ (((__u16) serial->port[i]->number -
+ (__u16) (serial->minor)) + 1) << 8;
+ if (mos7840_port->open) {
+ if (sp[i] & 0x01) {
+ dbg("SP%d No Interrupt !!!\n", i);
+ } else {
+ switch (sp[i] & 0x0f) {
+ case SERIAL_IIR_RLS:
+ dbg("Serial Port %d: Receiver status error or ", i);
+ dbg("address bit detected in 9-bit mode\n");
+ mos7840_port->MsrLsr = 1;
+ mos7840_get_reg(mos7840_port, wval,
+ LINE_STATUS_REGISTER,
+ &Data);
+ break;
+ case SERIAL_IIR_MS:
+ dbg("Serial Port %d: Modem status change\n", i);
+ mos7840_port->MsrLsr = 0;
+ mos7840_get_reg(mos7840_port, wval,
+ MODEM_STATUS_REGISTER,
+ &Data);
+ break;
+ }
+ }
+ }
+ }
+ exit:
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result) {
+ dev_err(&urb->dev->dev,
+ "%s - Error %d submitting interrupt urb\n",
+ __FUNCTION__, result);
+ }
+
+ return;
+
+}
+
+static int mos7840_port_paranoia_check(struct usb_serial_port *port,
+ const char *function)
+{
+ if (!port) {
+ dbg("%s - port == NULL", function);
+ return -1;
+ }
+ if (!port->serial) {
+ dbg("%s - port->serial == NULL", function);
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Inline functions to check the sanity of a pointer that is passed to us */
+static int mos7840_serial_paranoia_check(struct usb_serial *serial,
+ const char *function)
+{
+ if (!serial) {
+ dbg("%s - serial == NULL", function);
+ return -1;
+ }
+ if (!serial->type) {
+ dbg("%s - serial->type == NULL!", function);
+ return -1;
+ }
+
+ return 0;
+}
+
+static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
+ const char *function)
+{
+ /* if no port was specified, or it fails a paranoia check */
+ if (!port ||
+ mos7840_port_paranoia_check(port, function) ||
+ mos7840_serial_paranoia_check(port->serial, function)) {
+ /* then say that we don't have a valid usb_serial thing, which will * end up genrating -ENODEV return values */
+ return NULL;
+ }
+
+ return port->serial;
+}
+
+/*****************************************************************************
+ * mos7840_bulk_in_callback
+ * this is the callback function for when we have received data on the
+ * bulk in endpoint.
+ *****************************************************************************/
+
+static void mos7840_bulk_in_callback(struct urb *urb, struct pt_regs *regs)
+{
+ int status;
+ unsigned char *data;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct moschip_port *mos7840_port;
+ struct tty_struct *tty;
+
+ if (!urb) {
+ dbg("%s", "Invalid Pointer !!!!:\n");
+ return;
+ }
+
+ if (urb->status) {
+ dbg("nonzero read bulk status received: %d", urb->status);
+ return;
+ }
+
+ mos7840_port = (struct moschip_port *)urb->context;
+ if (!mos7840_port) {
+ dbg("%s", "NULL mos7840_port pointer \n");
+ return;
+ }
+
+ port = (struct usb_serial_port *)mos7840_port->port;
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Port Paranoia failed \n");
+ return;
+ }
+
+ serial = mos7840_get_usb_serial(port, __FUNCTION__);
+ if (!serial) {
+ dbg("%s\n", "Bad serial pointer ");
+ return;
+ }
+
+ dbg("%s\n", "Entering... \n");
+
+ data = urb->transfer_buffer;
+
+ dbg("%s", "Entering ........... \n");
+
+ if (urb->actual_length) {
+ tty = mos7840_port->port->tty;
+ if (tty) {
+ tty_buffer_request_room(tty, urb->actual_length);
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ dbg(" %s \n", data);
+ tty_flip_buffer_push(tty);
+ }
+ mos7840_port->icount.rx += urb->actual_length;
+ dbg("mos7840_port->icount.rx is %d:\n",
+ mos7840_port->icount.rx);
+ }
+
+ if (!mos7840_port->read_urb) {
+ dbg("%s", "URB KILLED !!!\n");
+ return;
+ }
+
+ if (mos7840_port->read_urb->status != -EINPROGRESS) {
+ mos7840_port->read_urb->dev = serial->dev;
+
+ status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+
+ if (status) {
+ dbg(" usb_submit_urb(read bulk) failed, status = %d",
+ status);
+ }
+ }
+}
+
+/*****************************************************************************
+ * mos7840_bulk_out_data_callback
+ * this is the callback function for when we have finished sending serial data
+ * on the bulk out endpoint.
+ *****************************************************************************/
+
+static void mos7840_bulk_out_data_callback(struct urb *urb,
+ struct pt_regs *regs)
+{
+ struct moschip_port *mos7840_port;
+ struct tty_struct *tty;
+ if (!urb) {
+ dbg("%s", "Invalid Pointer !!!!:\n");
+ return;
+ }
+
+ if (urb->status) {
+ dbg("nonzero write bulk status received:%d\n", urb->status);
+ return;
+ }
+
+ mos7840_port = (struct moschip_port *)urb->context;
+ if (!mos7840_port) {
+ dbg("%s", "NULL mos7840_port pointer \n");
+ return;
+ }
+
+ if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) {
+ dbg("%s", "Port Paranoia failed \n");
+ return;
+ }
+
+ dbg("%s \n", "Entering .........");
+
+ tty = mos7840_port->port->tty;
+
+ if (tty && mos7840_port->open) {
+ /* let the tty driver wakeup if it has a special *
+ * write_wakeup function */
+
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
+ && tty->ldisc.write_wakeup) {
+ (tty->ldisc.write_wakeup) (tty);
+ }
+
+ /* tell the tty driver that something has changed */
+ wake_up_interruptible(&tty->write_wait);
+ }
+
+}
+
+/************************************************************************/
+/* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */
+/************************************************************************/
+#ifdef MCSSerialProbe
+static int mos7840_serial_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+
+ /*need to implement the mode_reg reading and updating\
+ structures usb_serial_ device_type\
+ (i.e num_ports, num_bulkin,bulkout etc) */
+ /* Also we can update the changes attach */
+ return 1;
+}
+#endif
+
+/*****************************************************************************
+ * mos7840_open
+ * this function is called by the tty driver when a port is opened
+ * If successful, we return 0
+ * Otherwise we return a negative error number.
+ *****************************************************************************/
+
+static int mos7840_open(struct usb_serial_port *port, struct file *filp)
+{
+ int response;
+ int j;
+ struct usb_serial *serial;
+ struct urb *urb;
+ __u16 Data;
+ int status;
+ struct moschip_port *mos7840_port;
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Port Paranoia failed \n");
+ return -ENODEV;
+ }
+
+ mos7840_num_open_ports++;
+ serial = port->serial;
+
+ if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
+ dbg("%s", "Serial Paranoia failed \n");
+ return -ENODEV;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+
+ if (mos7840_port == NULL)
+ return -ENODEV;
+
+ usb_clear_halt(serial->dev, port->write_urb->pipe);
+ usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+ /* Initialising the write urb pool */
+ for (j = 0; j < NUM_URBS; ++j) {
+ urb = usb_alloc_urb(0, SLAB_ATOMIC);
+ mos7840_port->write_urb_pool[j] = urb;
+
+ if (urb == NULL) {
+ err("No more urbs???");
+ continue;
+ }
+
+ urb->transfer_buffer = NULL;
+ urb->transfer_buffer =
+ kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+ if (!urb->transfer_buffer) {
+ err("%s-out of memory for urb buffers.", __FUNCTION__);
+ continue;
+ }
+ }
+
+/*****************************************************************************
+ * Initialize MCS7840 -- Write Init values to corresponding Registers
+ *
+ * Register Index
+ * 1 : IER
+ * 2 : FCR
+ * 3 : LCR
+ * 4 : MCR
+ *
+ * 0x08 : SP1/2 Control Reg
+ *****************************************************************************/
+
+//NEED to check the following Block
+
+ status = 0;
+ Data = 0x0;
+ status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
+ if (status < 0) {
+ dbg("Reading Spreg failed\n");
+ return -1;
+ }
+ Data |= 0x80;
+ status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+ if (status < 0) {
+ dbg("writing Spreg failed\n");
+ return -1;
+ }
+
+ Data &= ~0x80;
+ status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+ if (status < 0) {
+ dbg("writing Spreg failed\n");
+ return -1;
+ }
+//End of block to be checked
+
+ status = 0;
+ Data = 0x0;
+ status =
+ mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+ if (status < 0) {
+ dbg("Reading Controlreg failed\n");
+ return -1;
+ }
+ Data |= 0x08; //Driver done bit
+ Data |= 0x20; //rx_disable
+ status = 0;
+ status =
+ mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+ if (status < 0) {
+ dbg("writing Controlreg failed\n");
+ return -1;
+ }
+ //do register settings here
+ // Set all regs to the device default values.
+ ////////////////////////////////////
+ // First Disable all interrupts.
+ ////////////////////////////////////
+
+ Data = 0x00;
+ status = 0;
+ status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+ if (status < 0) {
+ dbg("disableing interrupts failed\n");
+ return -1;
+ }
+ // Set FIFO_CONTROL_REGISTER to the default value
+ Data = 0x00;
+ status = 0;
+ status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+ if (status < 0) {
+ dbg("Writing FIFO_CONTROL_REGISTER failed\n");
+ return -1;
+ }
+
+ Data = 0xcf;
+ status = 0;
+ status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+ if (status < 0) {
+ dbg("Writing FIFO_CONTROL_REGISTER failed\n");
+ return -1;
+ }
+
+ Data = 0x03;
+ status = 0;
+ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+ mos7840_port->shadowLCR = Data;
+
+ Data = 0x0b;
+ status = 0;
+ status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+ mos7840_port->shadowMCR = Data;
+
+ Data = 0x00;
+ status = 0;
+ status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
+ mos7840_port->shadowLCR = Data;
+
+ Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80
+ status = 0;
+ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+ Data = 0x0c;
+ status = 0;
+ status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
+
+ Data = 0x0;
+ status = 0;
+ status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
+
+ Data = 0x00;
+ status = 0;
+ status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
+
+ Data = Data & ~SERIAL_LCR_DLAB;
+ status = 0;
+ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+ mos7840_port->shadowLCR = Data;
+
+ //clearing Bulkin and Bulkout Fifo
+ Data = 0x0;
+ status = 0;
+ status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
+
+ Data = Data | 0x0c;
+ status = 0;
+ status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+
+ Data = Data & ~0x0c;
+ status = 0;
+ status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+ //Finally enable all interrupts
+ Data = 0x0;
+ Data = 0x0c;
+ status = 0;
+ status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+
+ //clearing rx_disable
+ Data = 0x0;
+ status = 0;
+ status =
+ mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+ Data = Data & ~0x20;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+
+ // rx_negate
+ Data = 0x0;
+ status = 0;
+ status =
+ mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
+ Data = Data | 0x10;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+
+ /* force low_latency on so that our tty_push actually forces *
+ * the data through,otherwise it is scheduled, and with *
+ * high data rates (like with OHCI) data can get lost. */
+
+ if (port->tty)
+ port->tty->low_latency = 1;
+/* Check to see if we've set up our endpoint info yet *
+ * (can't set it up in mos7840_startup as the structures *
+ * were not set up at that time.) */
+ if (mos7840_num_open_ports == 1) {
+ if (serial->port[0]->interrupt_in_buffer == NULL) {
+
+ /* set up interrupt urb */
+
+ usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
+ serial->dev,
+ usb_rcvintpipe(serial->dev,
+ serial->port[0]->
+ interrupt_in_endpointAddress),
+ serial->port[0]->interrupt_in_buffer,
+ serial->port[0]->interrupt_in_urb->
+ transfer_buffer_length,
+ mos7840_interrupt_callback,
+ serial,
+ serial->port[0]->interrupt_in_urb->
+ interval);
+
+ /* start interrupt read for mos7840 *
+ * will continue as long as mos7840 is connected */
+
+ response =
+ usb_submit_urb(serial->port[0]->interrupt_in_urb,
+ GFP_KERNEL);
+ if (response) {
+ err("%s - Error %d submitting interrupt urb",
+ __FUNCTION__, response);
+ }
+
+ }
+
+ }
+
+ /* see if we've set up our endpoint info yet *
+ * (can't set it up in mos7840_startup as the *
+ * structures were not set up at that time.) */
+
+ dbg("port number is %d \n", port->number);
+ dbg("serial number is %d \n", port->serial->minor);
+ dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress);
+ dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress);
+ dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress);
+ dbg("port's number in the device is %d\n", mos7840_port->port_num);
+ mos7840_port->read_urb = port->read_urb;
+
+ /* set up our bulk in urb */
+
+ usb_fill_bulk_urb(mos7840_port->read_urb,
+ serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_in_endpointAddress),
+ port->bulk_in_buffer,
+ mos7840_port->read_urb->transfer_buffer_length,
+ mos7840_bulk_in_callback, mos7840_port);
+
+ dbg("mos7840_open: bulkin endpoint is %d\n",
+ port->bulk_in_endpointAddress);
+ response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
+ if (response) {
+ err("%s - Error %d submitting control urb", __FUNCTION__,
+ response);
+ }
+
+ /* initialize our wait queues */
+ init_waitqueue_head(&mos7840_port->wait_chase);
+ init_waitqueue_head(&mos7840_port->delta_msr_wait);
+
+ /* initialize our icount structure */
+ memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
+
+ /* initialize our port settings */
+ mos7840_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */
+ /* send a open port command */
+ mos7840_port->open = 1;
+ //mos7840_change_port_settings(mos7840_port,old_termios);
+ mos7840_port->icount.tx = 0;
+ mos7840_port->icount.rx = 0;
+
+ dbg("\n\nusb_serial serial:%x mos7840_port:%x\n usb_serial_port port:%x\n\n", (unsigned int)serial, (unsigned int)mos7840_port, (unsigned int)port);
+
+ return 0;
+
+}
+
+/*****************************************************************************
+ * mos7840_chars_in_buffer
+ * this function is called by the tty driver when it wants to know how many
+ * bytes of data we currently have outstanding in the port (data that has
+ * been written, but hasn't made it out the port yet)
+ * If successful, we return the number of bytes left to be written in the
+ * system,
+ * Otherwise we return a negative error number.
+ *****************************************************************************/
+
+static int mos7840_chars_in_buffer(struct usb_serial_port *port)
+{
+ int i;
+ int chars = 0;
+ struct moschip_port *mos7840_port;
+
+ dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return -1;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+ if (mos7840_port == NULL) {
+ dbg("%s \n", "mos7840_break:leaving ...........");
+ return -1;
+ }
+
+ for (i = 0; i < NUM_URBS; ++i) {
+ if (mos7840_port->write_urb_pool[i]->status == -EINPROGRESS) {
+ chars += URB_TRANSFER_BUFFER_SIZE;
+ }
+ }
+ dbg("%s - returns %d", __FUNCTION__, chars);
+ return (chars);
+
+}
+
+/************************************************************************
+ *
+ * mos7840_block_until_tx_empty
+ *
+ * This function will block the close until one of the following:
+ * 1. TX count are 0
+ * 2. The mos7840 has stopped
+ * 3. A timout of 3 seconds without activity has expired
+ *
+ ************************************************************************/
+static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
+{
+ int timeout = HZ / 10;
+ int wait = 30;
+ int count;
+
+ while (1) {
+
+ count = mos7840_chars_in_buffer(mos7840_port->port);
+
+ /* Check for Buffer status */
+ if (count <= 0) {
+ return;
+ }
+
+ /* Block the thread for a while */
+ interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
+ timeout);
+
+ /* No activity.. count down section */
+ wait--;
+ if (wait == 0) {
+ dbg("%s - TIMEOUT", __FUNCTION__);
+ return;
+ } else {
+ /* Reset timout value back to seconds */
+ wait = 30;
+ }
+ }
+}
+
+/*****************************************************************************
+ * mos7840_close
+ * this function is called by the tty driver when a port is closed
+ *****************************************************************************/
+
+static void mos7840_close(struct usb_serial_port *port, struct file *filp)
+{
+ struct usb_serial *serial;
+ struct moschip_port *mos7840_port;
+ int j;
+ __u16 Data;
+
+ dbg("%s\n", "mos7840_close:entering...");
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Port Paranoia failed \n");
+ return;
+ }
+
+ serial = mos7840_get_usb_serial(port, __FUNCTION__);
+ if (!serial) {
+ dbg("%s", "Serial Paranoia failed \n");
+ return;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+
+ if (mos7840_port == NULL) {
+ return;
+ }
+
+ for (j = 0; j < NUM_URBS; ++j)
+ usb_kill_urb(mos7840_port->write_urb_pool[j]);
+
+ /* Freeing Write URBs */
+ for (j = 0; j < NUM_URBS; ++j) {
+ if (mos7840_port->write_urb_pool[j]) {
+ if (mos7840_port->write_urb_pool[j]->transfer_buffer)
+ kfree(mos7840_port->write_urb_pool[j]->
+ transfer_buffer);
+
+ usb_free_urb(mos7840_port->write_urb_pool[j]);
+ }
+ }
+
+ if (serial->dev) {
+ /* flush and block until tx is empty */
+ mos7840_block_until_tx_empty(mos7840_port);
+ }
+
+ /* While closing port, shutdown all bulk read, write *
+ * and interrupt read if they exists */
+ if (serial->dev) {
+
+ if (mos7840_port->write_urb) {
+ dbg("%s", "Shutdown bulk write\n");
+ usb_kill_urb(mos7840_port->write_urb);
+ }
+
+ if (mos7840_port->read_urb) {
+ dbg("%s", "Shutdown bulk read\n");
+ usb_kill_urb(mos7840_port->read_urb);
+ }
+ if ((&mos7840_port->control_urb)) {
+ dbg("%s", "Shutdown control read\n");
+ // usb_kill_urb (mos7840_port->control_urb);
+
+ }
+ }
+// if(mos7840_port->ctrl_buf != NULL)
+// kfree(mos7840_port->ctrl_buf);
+ mos7840_num_open_ports--;
+ dbg("mos7840_num_open_ports in close%d:in port%d\n",
+ mos7840_num_open_ports, port->number);
+ if (mos7840_num_open_ports == 0) {
+ if (serial->port[0]->interrupt_in_urb) {
+ dbg("%s", "Shutdown interrupt_in_urb\n");
+ }
+ }
+
+ if (mos7840_port->write_urb) {
+ /* if this urb had a transfer buffer already (old tx) free it */
+
+ if (mos7840_port->write_urb->transfer_buffer != NULL) {
+ kfree(mos7840_port->write_urb->transfer_buffer);
+ }
+ usb_free_urb(mos7840_port->write_urb);
+ }
+
+ Data = 0x0;
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+
+ Data = 0x00;
+ mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+
+ mos7840_port->open = 0;
+
+ dbg("%s \n", "Leaving ............");
+}
+
+/************************************************************************
+ *
+ * mos7840_block_until_chase_response
+ *
+ * This function will block the close until one of the following:
+ * 1. Response to our Chase comes from mos7840
+ * 2. A timout of 10 seconds without activity has expired
+ * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty)
+ *
+ ************************************************************************/
+
+static void mos7840_block_until_chase_response(struct moschip_port
+ *mos7840_port)
+{
+ int timeout = 1 * HZ;
+ int wait = 10;
+ int count;
+
+ while (1) {
+ count = mos7840_chars_in_buffer(mos7840_port->port);
+
+ /* Check for Buffer status */
+ if (count <= 0) {
+ return;
+ }
+
+ /* Block the thread for a while */
+ interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
+ timeout);
+ /* No activity.. count down section */
+ wait--;
+ if (wait == 0) {
+ dbg("%s - TIMEOUT", __FUNCTION__);
+ return;
+ } else {
+ /* Reset timout value back to seconds */
+ wait = 10;
+ }
+ }
+
+}
+
+/*****************************************************************************
+ * mos7840_break
+ * this function sends a break to the port
+ *****************************************************************************/
+static void mos7840_break(struct usb_serial_port *port, int break_state)
+{
+ unsigned char data;
+ struct usb_serial *serial;
+ struct moschip_port *mos7840_port;
+
+ dbg("%s \n", "Entering ...........");
+ dbg("mos7840_break: Start\n");
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Port Paranoia failed \n");
+ return;
+ }
+
+ serial = mos7840_get_usb_serial(port, __FUNCTION__);
+ if (!serial) {
+ dbg("%s", "Serial Paranoia failed \n");
+ return;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+
+ if (mos7840_port == NULL) {
+ return;
+ }
+
+ if (serial->dev) {
+
+ /* flush and block until tx is empty */
+ mos7840_block_until_chase_response(mos7840_port);
+ }
+
+ if (break_state == -1) {
+ data = mos7840_port->shadowLCR | LCR_SET_BREAK;
+ } else {
+ data = mos7840_port->shadowLCR & ~LCR_SET_BREAK;
+ }
+
+ mos7840_port->shadowLCR = data;
+ dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
+ mos7840_port->shadowLCR);
+ mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
+ mos7840_port->shadowLCR);
+
+ return;
+}
+
+/*****************************************************************************
+ * mos7840_write_room
+ * this function is called by the tty driver when it wants to know how many
+ * bytes of data we can accept for a specific port.
+ * If successful, we return the amount of room that we have for this port
+ * Otherwise we return a negative error number.
+ *****************************************************************************/
+
+static int mos7840_write_room(struct usb_serial_port *port)
+{
+ int i;
+ int room = 0;
+ struct moschip_port *mos7840_port;
+
+ dbg("%s \n", " mos7840_write_room:entering ...........");
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ dbg("%s \n", " mos7840_write_room:leaving ...........");
+ return -1;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+ if (mos7840_port == NULL) {
+ dbg("%s \n", "mos7840_break:leaving ...........");
+ return -1;
+ }
+
+ for (i = 0; i < NUM_URBS; ++i) {
+ if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) {
+ room += URB_TRANSFER_BUFFER_SIZE;
+ }
+ }
+
+ dbg("%s - returns %d", __FUNCTION__, room);
+ return (room);
+
+}
+
+/*****************************************************************************
+ * mos7840_write
+ * this function is called by the tty driver when data should be written to
+ * the port.
+ * If successful, we return the number of bytes written, otherwise we
+ * return a negative error number.
+ *****************************************************************************/
+
+static int mos7840_write(struct usb_serial_port *port,
+ const unsigned char *data, int count)
+{
+ int status;
+ int i;
+ int bytes_sent = 0;
+ int transfer_size;
+ int from_user = 0;
+
+ struct moschip_port *mos7840_port;
+ struct usb_serial *serial;
+ struct urb *urb;
+ //__u16 Data;
+ const unsigned char *current_position = data;
+ unsigned char *data1;
+ dbg("%s \n", "entering ...........");
+ //dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR);
+
+#ifdef NOTMOS7840
+ Data = 0x00;
+ status = 0;
+ status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
+ mos7840_port->shadowLCR = Data;
+ dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data);
+ dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ mos7840_port->shadowLCR);
+
+ //Data = 0x03;
+ //status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data);
+ //mos7840_port->shadowLCR=Data;//Need to add later
+
+ Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80
+ status = 0;
+ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+ //Data = 0x0c;
+ //status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data);
+ Data = 0x00;
+ status = 0;
+ status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
+ dbg("mos7840_write:DLL value is %x\n", Data);
+
+ Data = 0x0;
+ status = 0;
+ status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
+ dbg("mos7840_write:DLM value is %x\n", Data);
+
+ Data = Data & ~SERIAL_LCR_DLAB;
+ dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
+ mos7840_port->shadowLCR);
+ status = 0;
+ status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+#endif
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Port Paranoia failed \n");
+ return -1;
+ }
+
+ serial = port->serial;
+ if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
+ dbg("%s", "Serial Paranoia failed \n");
+ return -1;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+ if (mos7840_port == NULL) {
+ dbg("%s", "mos7840_port is NULL\n");
+ return -1;
+ }
+
+ /* try to find a free urb in the list */
+ urb = NULL;
+
+ for (i = 0; i < NUM_URBS; ++i) {
+ if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) {
+ urb = mos7840_port->write_urb_pool[i];
+ dbg("\nURB:%d", i);
+ break;
+ }
+ }
+
+ if (urb == NULL) {
+ dbg("%s - no more free urbs", __FUNCTION__);
+ goto exit;
+ }
+
+ if (urb->transfer_buffer == NULL) {
+ urb->transfer_buffer =
+ kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+
+ if (urb->transfer_buffer == NULL) {
+ err("%s no more kernel memory...", __FUNCTION__);
+ goto exit;
+ }
+ }
+ transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
+
+ if (from_user) {
+ if (copy_from_user
+ (urb->transfer_buffer, current_position, transfer_size)) {
+ bytes_sent = -EFAULT;
+ goto exit;
+ }
+ } else {
+ memcpy(urb->transfer_buffer, current_position, transfer_size);
+ }
+
+ /* fill urb with data and submit */
+ usb_fill_bulk_urb(urb,
+ serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ port->bulk_out_endpointAddress),
+ urb->transfer_buffer,
+ transfer_size,
+ mos7840_bulk_out_data_callback, mos7840_port);
+
+ data1 = urb->transfer_buffer;
+ dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress);
+
+ /* send it down the pipe */
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (status) {
+ err("%s - usb_submit_urb(write bulk) failed with status = %d",
+ __FUNCTION__, status);
+ bytes_sent = status;
+ goto exit;
+ }
+ bytes_sent = transfer_size;
+ mos7840_port->icount.tx += transfer_size;
+ dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
+ exit:
+
+ return bytes_sent;
+
+}
+
+/*****************************************************************************
+ * mos7840_throttle
+ * this function is called by the tty driver when it wants to stop the data
+ * being read from the port.
+ *****************************************************************************/
+
+static void mos7840_throttle(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7840_port;
+ struct tty_struct *tty;
+ int status;
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return;
+ }
+
+ dbg("- port %d\n", port->number);
+
+ mos7840_port = mos7840_get_port_private(port);
+
+ if (mos7840_port == NULL)
+ return;
+
+ if (!mos7840_port->open) {
+ dbg("%s\n", "port not opened");
+ return;
+ }
+
+ dbg("%s", "Entering .......... \n");
+
+ tty = port->tty;
+ if (!tty) {
+ dbg("%s - no tty available", __FUNCTION__);
+ return;
+ }
+
+ /* if we are implementing XON/XOFF, send the stop character */
+ if (I_IXOFF(tty)) {
+ unsigned char stop_char = STOP_CHAR(tty);
+ status = mos7840_write(port, &stop_char, 1);
+ if (status <= 0) {
+ return;
+ }
+ }
+
+ /* if we are implementing RTS/CTS, toggle that line */
+ if (tty->termios->c_cflag & CRTSCTS) {
+ mos7840_port->shadowMCR &= ~MCR_RTS;
+ status = 0;
+ status =
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+ mos7840_port->shadowMCR);
+
+ if (status < 0) {
+ return;
+ }
+ }
+
+ return;
+}
+
+/*****************************************************************************
+ * mos7840_unthrottle
+ * this function is called by the tty driver when it wants to resume the data
+ * being read from the port (called after SerialThrottle is called)
+ *****************************************************************************/
+static void mos7840_unthrottle(struct usb_serial_port *port)
+{
+ struct tty_struct *tty;
+ int status;
+ struct moschip_port *mos7840_port = mos7840_get_port_private(port);
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return;
+ }
+
+ if (mos7840_port == NULL)
+ return;
+
+ if (!mos7840_port->open) {
+ dbg("%s - port not opened", __FUNCTION__);
+ return;
+ }
+
+ dbg("%s", "Entering .......... \n");
+
+ tty = port->tty;
+ if (!tty) {
+ dbg("%s - no tty available", __FUNCTION__);
+ return;
+ }
+
+ /* if we are implementing XON/XOFF, send the start character */
+ if (I_IXOFF(tty)) {
+ unsigned char start_char = START_CHAR(tty);
+ status = mos7840_write(port, &start_char, 1);
+ if (status <= 0) {
+ return;
+ }
+ }
+
+ /* if we are implementing RTS/CTS, toggle that line */
+ if (tty->termios->c_cflag & CRTSCTS) {
+ mos7840_port->shadowMCR |= MCR_RTS;
+ status = 0;
+ status =
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+ mos7840_port->shadowMCR);
+ if (status < 0) {
+ return;
+ }
+ }
+
+ return;
+}
+
+static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+ struct moschip_port *mos7840_port;
+ unsigned int result;
+ __u16 msr;
+ __u16 mcr;
+ int status = 0;
+ mos7840_port = mos7840_get_port_private(port);
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (mos7840_port == NULL)
+ return -ENODEV;
+
+ status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
+ status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
+ result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
+ | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
+ | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
+ | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)
+ | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0)
+ | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)
+ | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);
+
+ dbg("%s - 0x%04X", __FUNCTION__, result);
+
+ return result;
+}
+
+static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct moschip_port *mos7840_port;
+ unsigned int mcr;
+ unsigned int status;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ mos7840_port = mos7840_get_port_private(port);
+
+ if (mos7840_port == NULL)
+ return -ENODEV;
+
+ mcr = mos7840_port->shadowMCR;
+ if (clear & TIOCM_RTS)
+ mcr &= ~MCR_RTS;
+ if (clear & TIOCM_DTR)
+ mcr &= ~MCR_DTR;
+ if (clear & TIOCM_LOOP)
+ mcr &= ~MCR_LOOPBACK;
+
+ if (set & TIOCM_RTS)
+ mcr |= MCR_RTS;
+ if (set & TIOCM_DTR)
+ mcr |= MCR_DTR;
+ if (set & TIOCM_LOOP)
+ mcr |= MCR_LOOPBACK;
+
+ mos7840_port->shadowMCR = mcr;
+
+ status = 0;
+ status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
+ if (status < 0) {
+ dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*****************************************************************************
+ * mos7840_calc_baud_rate_divisor
+ * this function calculates the proper baud rate divisor for the specified
+ * baud rate.
+ *****************************************************************************/
+static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
+ __u16 * clk_sel_val)
+{
+
+ dbg("%s - %d", __FUNCTION__, baudRate);
+
+ if (baudRate <= 115200) {
+ *divisor = 115200 / baudRate;
+ *clk_sel_val = 0x0;
+ }
+ if ((baudRate > 115200) && (baudRate <= 230400)) {
+ *divisor = 230400 / baudRate;
+ *clk_sel_val = 0x10;
+ } else if ((baudRate > 230400) && (baudRate <= 403200)) {
+ *divisor = 403200 / baudRate;
+ *clk_sel_val = 0x20;
+ } else if ((baudRate > 403200) && (baudRate <= 460800)) {
+ *divisor = 460800 / baudRate;
+ *clk_sel_val = 0x30;
+ } else if ((baudRate > 460800) && (baudRate <= 806400)) {
+ *divisor = 806400 / baudRate;
+ *clk_sel_val = 0x40;
+ } else if ((baudRate > 806400) && (baudRate <= 921600)) {
+ *divisor = 921600 / baudRate;
+ *clk_sel_val = 0x50;
+ } else if ((baudRate > 921600) && (baudRate <= 1572864)) {
+ *divisor = 1572864 / baudRate;
+ *clk_sel_val = 0x60;
+ } else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
+ *divisor = 3145728 / baudRate;
+ *clk_sel_val = 0x70;
+ }
+ return 0;
+
+#ifdef NOTMCS7840
+
+ for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) {
+ if (mos7840_divisor_table[i].BaudRate == baudrate) {
+ *divisor = mos7840_divisor_table[i].Divisor;
+ return 0;
+ }
+ }
+
+ /* After trying for all the standard baud rates *
+ * Try calculating the divisor for this baud rate */
+
+ if (baudrate > 75 && baudrate < 230400) {
+ /* get the divisor */
+ custom = (__u16) (230400L / baudrate);
+
+ /* Check for round off */
+ round1 = (__u16) (2304000L / baudrate);
+ round = (__u16) (round1 - (custom * 10));
+ if (round > 4) {
+ custom++;
+ }
+ *divisor = custom;
+
+ dbg(" Baud %d = %d\n", baudrate, custom);
+ return 0;
+ }
+
+ dbg("%s\n", " Baud calculation Failed...");
+ return -1;
+#endif
+}
+
+/*****************************************************************************
+ * mos7840_send_cmd_write_baud_rate
+ * this function sends the proper command to change the baud rate of the
+ * specified port.
+ *****************************************************************************/
+
+static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
+ int baudRate)
+{
+ int divisor = 0;
+ int status;
+ __u16 Data;
+ unsigned char number;
+ __u16 clk_sel_val;
+ struct usb_serial_port *port;
+
+ if (mos7840_port == NULL)
+ return -1;
+
+ port = (struct usb_serial_port *)mos7840_port->port;
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return -1;
+ }
+
+ if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) {
+ dbg("%s", "Invalid Serial \n");
+ return -1;
+ }
+
+ dbg("%s", "Entering .......... \n");
+
+ number = mos7840_port->port->number - mos7840_port->port->serial->minor;
+
+ dbg("%s - port = %d, baud = %d", __FUNCTION__,
+ mos7840_port->port->number, baudRate);
+ //reset clk_uart_sel in spregOffset
+ if (baudRate > 115200) {
+#ifdef HW_flow_control
+ //NOTE: need to see the pther register to modify
+ //setting h/w flow control bit to 1;
+ status = 0;
+ Data = 0x2b;
+ mos7840_port->shadowMCR = Data;
+ status =
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+ if (status < 0) {
+ dbg("Writing spreg failed in set_serial_baud\n");
+ return -1;
+ }
+#endif
+
+ } else {
+#ifdef HW_flow_control
+ //setting h/w flow control bit to 0;
+ status = 0;
+ Data = 0xb;
+ mos7840_port->shadowMCR = Data;
+ status =
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+ if (status < 0) {
+ dbg("Writing spreg failed in set_serial_baud\n");
+ return -1;
+ }
+#endif
+
+ }
+
+ if (1) //baudRate <= 115200)
+ {
+ clk_sel_val = 0x0;
+ Data = 0x0;
+ status = 0;
+ status =
+ mos7840_calc_baud_rate_divisor(baudRate, &divisor,
+ &clk_sel_val);
+ status =
+ mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
+ &Data);
+ if (status < 0) {
+ dbg("reading spreg failed in set_serial_baud\n");
+ return -1;
+ }
+ Data = (Data & 0x8f) | clk_sel_val;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
+ if (status < 0) {
+ dbg("Writing spreg failed in set_serial_baud\n");
+ return -1;
+ }
+ /* Calculate the Divisor */
+
+ if (status) {
+ err("%s - bad baud rate", __FUNCTION__);
+ dbg("%s\n", "bad baud rate");
+ return status;
+ }
+ /* Enable access to divisor latch */
+ Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB;
+ mos7840_port->shadowLCR = Data;
+ mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+ /* Write the divisor */
+ Data = (unsigned char)(divisor & 0xff);
+ dbg("set_serial_baud Value to write DLL is %x\n", Data);
+ mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
+
+ Data = (unsigned char)((divisor & 0xff00) >> 8);
+ dbg("set_serial_baud Value to write DLM is %x\n", Data);
+ mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
+
+ /* Disable access to divisor latch */
+ Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB;
+ mos7840_port->shadowLCR = Data;
+ mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+ }
+
+ return status;
+}
+
+/*****************************************************************************
+ * mos7840_change_port_settings
+ * This routine is called to set the UART on the device to match
+ * the specified new settings.
+ *****************************************************************************/
+
+static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
+ struct termios *old_termios)
+{
+ struct tty_struct *tty;
+ int baud;
+ unsigned cflag;
+ unsigned iflag;
+ __u8 lData;
+ __u8 lParity;
+ __u8 lStop;
+ int status;
+ __u16 Data;
+ struct usb_serial_port *port;
+ struct usb_serial *serial;
+
+ if (mos7840_port == NULL)
+ return;
+
+ port = (struct usb_serial_port *)mos7840_port->port;
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return;
+ }
+
+ if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) {
+ dbg("%s", "Invalid Serial \n");
+ return;
+ }
+
+ serial = port->serial;
+
+ dbg("%s - port %d", __FUNCTION__, mos7840_port->port->number);
+
+ if (!mos7840_port->open) {
+ dbg("%s - port not opened", __FUNCTION__);
+ return;
+ }
+
+ tty = mos7840_port->port->tty;
+
+ if ((!tty) || (!tty->termios)) {
+ dbg("%s - no tty structures", __FUNCTION__);
+ return;
+ }
+
+ dbg("%s", "Entering .......... \n");
+
+ lData = LCR_BITS_8;
+ lStop = LCR_STOP_1;
+ lParity = LCR_PAR_NONE;
+
+ cflag = tty->termios->c_cflag;
+ iflag = tty->termios->c_iflag;
+
+ /* Change the number of bits */
+ if (cflag & CSIZE) {
+ switch (cflag & CSIZE) {
+ case CS5:
+ lData = LCR_BITS_5;
+ break;
+
+ case CS6:
+ lData = LCR_BITS_6;
+ break;
+
+ case CS7:
+ lData = LCR_BITS_7;
+ break;
+ default:
+ case CS8:
+ lData = LCR_BITS_8;
+ break;
+ }
+ }
+ /* Change the Parity bit */
+ if (cflag & PARENB) {
+ if (cflag & PARODD) {
+ lParity = LCR_PAR_ODD;
+ dbg("%s - parity = odd", __FUNCTION__);
+ } else {
+ lParity = LCR_PAR_EVEN;
+ dbg("%s - parity = even", __FUNCTION__);
+ }
+
+ } else {
+ dbg("%s - parity = none", __FUNCTION__);
+ }
+
+ if (cflag & CMSPAR) {
+ lParity = lParity | 0x20;
+ }
+
+ /* Change the Stop bit */
+ if (cflag & CSTOPB) {
+ lStop = LCR_STOP_2;
+ dbg("%s - stop bits = 2", __FUNCTION__);
+ } else {
+ lStop = LCR_STOP_1;
+ dbg("%s - stop bits = 1", __FUNCTION__);
+ }
+
+ /* Update the LCR with the correct value */
+ mos7840_port->shadowLCR &=
+ ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+ mos7840_port->shadowLCR |= (lData | lParity | lStop);
+
+ dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n",
+ mos7840_port->shadowLCR);
+ /* Disable Interrupts */
+ Data = 0x00;
+ mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+
+ Data = 0x00;
+ mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+
+ Data = 0xcf;
+ mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
+
+ /* Send the updated LCR value to the mos7840 */
+ Data = mos7840_port->shadowLCR;
+
+ mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
+
+ Data = 0x00b;
+ mos7840_port->shadowMCR = Data;
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+ Data = 0x00b;
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+
+ /* set up the MCR register and send it to the mos7840 */
+
+ mos7840_port->shadowMCR = MCR_MASTER_IE;
+ if (cflag & CBAUD) {
+ mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS);
+ }
+
+ if (cflag & CRTSCTS) {
+ mos7840_port->shadowMCR |= (MCR_XON_ANY);
+
+ } else {
+ mos7840_port->shadowMCR &= ~(MCR_XON_ANY);
+ }
+
+ Data = mos7840_port->shadowMCR;
+ mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+
+ /* Determine divisor based on baud rate */
+ baud = tty_get_baud_rate(tty);
+
+ if (!baud) {
+ /* pick a default, any default... */
+ dbg("%s\n", "Picked default baud...");
+ baud = 9600;
+ }
+
+ dbg("%s - baud rate = %d", __FUNCTION__, baud);
+ status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud);
+
+ /* Enable Interrupts */
+ Data = 0x0c;
+ mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
+
+ if (mos7840_port->read_urb->status != -EINPROGRESS) {
+ mos7840_port->read_urb->dev = serial->dev;
+
+ status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+
+ if (status) {
+ dbg(" usb_submit_urb(read bulk) failed, status = %d",
+ status);
+ }
+ }
+ wake_up(&mos7840_port->delta_msr_wait);
+ mos7840_port->delta_msr_cond = 1;
+ dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n",
+ mos7840_port->shadowLCR);
+
+ return;
+}
+
+/*****************************************************************************
+ * mos7840_set_termios
+ * this function is called by the tty driver when it wants to change
+ * the termios structure
+ *****************************************************************************/
+
+static void mos7840_set_termios(struct usb_serial_port *port,
+ struct termios *old_termios)
+{
+ int status;
+ unsigned int cflag;
+ struct usb_serial *serial;
+ struct moschip_port *mos7840_port;
+ struct tty_struct *tty;
+ dbg("mos7840_set_termios: START\n");
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return;
+ }
+
+ serial = port->serial;
+
+ if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
+ dbg("%s", "Invalid Serial \n");
+ return;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+
+ if (mos7840_port == NULL)
+ return;
+
+ tty = port->tty;
+
+ if (!port->tty || !port->tty->termios) {
+ dbg("%s - no tty or termios", __FUNCTION__);
+ return;
+ }
+
+ if (!mos7840_port->open) {
+ dbg("%s - port not opened", __FUNCTION__);
+ return;
+ }
+
+ dbg("%s\n", "setting termios - ");
+
+ cflag = tty->termios->c_cflag;
+
+ if (!cflag) {
+ dbg("%s %s\n", __FUNCTION__, "cflag is NULL");
+ return;
+ }
+
+ /* check that they really want us to change something */
+ if (old_termios) {
+ if ((cflag == old_termios->c_cflag) &&
+ (RELEVANT_IFLAG(tty->termios->c_iflag) ==
+ RELEVANT_IFLAG(old_termios->c_iflag))) {
+ dbg("%s\n", "Nothing to change");
+ return;
+ }
+ }
+
+ dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
+ tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
+
+ if (old_termios) {
+ dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
+ }
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* change the port settings to the new ones specified */
+
+ mos7840_change_port_settings(mos7840_port, old_termios);
+
+ if (!mos7840_port->read_urb) {
+ dbg("%s", "URB KILLED !!!!!\n");
+ return;
+ }
+
+ if (mos7840_port->read_urb->status != -EINPROGRESS) {
+ mos7840_port->read_urb->dev = serial->dev;
+ status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+ if (status) {
+ dbg(" usb_submit_urb(read bulk) failed, status = %d",
+ status);
+ }
+ }
+ return;
+}
+
+/*****************************************************************************
+ * mos7840_get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ *****************************************************************************/
+
+static int mos7840_get_lsr_info(struct moschip_port *mos7840_port,
+ unsigned int *value)
+{
+ int count;
+ unsigned int result = 0;
+
+ count = mos7840_chars_in_buffer(mos7840_port->port);
+ if (count == 0) {
+ dbg("%s -- Empty", __FUNCTION__);
+ result = TIOCSER_TEMT;
+ }
+
+ if (copy_to_user(value, &result, sizeof(int)))
+ return -EFAULT;
+ return 0;
+}
+
+/*****************************************************************************
+ * mos7840_get_bytes_avail - get number of bytes available
+ *
+ * Purpose: Let user call ioctl to get the count of number of bytes available.
+ *****************************************************************************/
+
+static int mos7840_get_bytes_avail(struct moschip_port *mos7840_port,
+ unsigned int *value)
+{
+ unsigned int result = 0;
+ struct tty_struct *tty = mos7840_port->port->tty;
+
+ if (!tty)
+ return -ENOIOCTLCMD;
+
+ result = tty->read_cnt;
+
+ dbg("%s(%d) = %d", __FUNCTION__, mos7840_port->port->number, result);
+ if (copy_to_user(value, &result, sizeof(int)))
+ return -EFAULT;
+
+ return -ENOIOCTLCMD;
+}
+
+/*****************************************************************************
+ * mos7840_set_modem_info
+ * function to set modem info
+ *****************************************************************************/
+
+static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
+ unsigned int cmd, unsigned int *value)
+{
+ unsigned int mcr;
+ unsigned int arg;
+ __u16 Data;
+ int status;
+ struct usb_serial_port *port;
+
+ if (mos7840_port == NULL)
+ return -1;
+
+ port = (struct usb_serial_port *)mos7840_port->port;
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return -1;
+ }
+
+ mcr = mos7840_port->shadowMCR;
+
+ if (copy_from_user(&arg, value, sizeof(int)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case TIOCMBIS:
+ if (arg & TIOCM_RTS)
+ mcr |= MCR_RTS;
+ if (arg & TIOCM_DTR)
+ mcr |= MCR_RTS;
+ if (arg & TIOCM_LOOP)
+ mcr |= MCR_LOOPBACK;
+ break;
+
+ case TIOCMBIC:
+ if (arg & TIOCM_RTS)
+ mcr &= ~MCR_RTS;
+ if (arg & TIOCM_DTR)
+ mcr &= ~MCR_RTS;
+ if (arg & TIOCM_LOOP)
+ mcr &= ~MCR_LOOPBACK;
+ break;
+
+ case TIOCMSET:
+ /* turn off the RTS and DTR and LOOPBACK
+ * and then only turn on what was asked to */
+ mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
+ mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
+ mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
+ mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
+ break;
+ }
+
+ mos7840_port->shadowMCR = mcr;
+
+ Data = mos7840_port->shadowMCR;
+ status = 0;
+ status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
+ if (status < 0) {
+ dbg("setting MODEM_CONTROL_REGISTER Failed\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*****************************************************************************
+ * mos7840_get_modem_info
+ * function to get modem info
+ *****************************************************************************/
+
+static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
+ unsigned int *value)
+{
+ unsigned int result = 0;
+ __u16 msr;
+ unsigned int mcr = mos7840_port->shadowMCR;
+ int status = 0;
+ status =
+ mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER,
+ &msr);
+ result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */
+ |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */
+ |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */
+ |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */
+ |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */
+ |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */
+
+ dbg("%s -- %x", __FUNCTION__, result);
+
+ if (copy_to_user(value, &result, sizeof(int)))
+ return -EFAULT;
+ return 0;
+}
+
+/*****************************************************************************
+ * mos7840_get_serial_info
+ * function to get information about serial port
+ *****************************************************************************/
+
+static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
+ struct serial_struct *retinfo)
+{
+ struct serial_struct tmp;
+
+ if (mos7840_port == NULL)
+ return -1;
+
+ if (!retinfo)
+ return -EFAULT;
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ tmp.type = PORT_16550A;
+ tmp.line = mos7840_port->port->serial->minor;
+ tmp.port = mos7840_port->port->number;
+ tmp.irq = 0;
+ tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+ tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
+ tmp.baud_base = 9600;
+ tmp.close_delay = 5 * HZ;
+ tmp.closing_wait = 30 * HZ;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+/*****************************************************************************
+ * SerialIoctl
+ * this function handles any ioctl calls to the driver
+ *****************************************************************************/
+
+static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct moschip_port *mos7840_port;
+ struct tty_struct *tty;
+
+ struct async_icount cnow;
+ struct async_icount cprev;
+ struct serial_icounter_struct icount;
+ int mosret = 0;
+ int retval;
+ struct tty_ldisc *ld;
+
+ if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ dbg("%s", "Invalid port \n");
+ return -1;
+ }
+
+ mos7840_port = mos7840_get_port_private(port);
+ tty = mos7840_port->port->tty;
+
+ if (mos7840_port == NULL)
+ return -1;
+
+ dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+
+ switch (cmd) {
+ /* return number of bytes available */
+
+ case TIOCINQ:
+ dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number);
+ return mos7840_get_bytes_avail(mos7840_port,
+ (unsigned int *)arg);
+ break;
+
+ case TIOCOUTQ:
+ dbg("%s (%d) TIOCOUTQ", __FUNCTION__, port->number);
+ return put_user(tty->driver->chars_in_buffer ?
+ tty->driver->chars_in_buffer(tty) : 0,
+ (int __user *)arg);
+ break;
+
+ case TCFLSH:
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+
+ ld = tty_ldisc_ref(tty);
+ switch (arg) {
+ case TCIFLUSH:
+ if (ld && ld->flush_buffer)
+ ld->flush_buffer(tty);
+ break;
+ case TCIOFLUSH:
+ if (ld && ld->flush_buffer)
+ ld->flush_buffer(tty);
+ /* fall through */
+ case TCOFLUSH:
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+ break;
+ default:
+ tty_ldisc_deref(ld);
+ return -EINVAL;
+ }
+ tty_ldisc_deref(ld);
+ return 0;
+
+ case TCGETS:
+ if (kernel_termios_to_user_termios
+ ((struct termios __user *)arg, tty->termios))
+ return -EFAULT;
+ return 0;
+
+ case TIOCSERGETLSR:
+ dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ return mos7840_get_lsr_info(mos7840_port, (unsigned int *)arg);
+ return 0;
+
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__,
+ port->number);
+ mosret =
+ mos7840_set_modem_info(mos7840_port, cmd,
+ (unsigned int *)arg);
+ return mosret;
+
+ case TIOCMGET:
+ dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
+ return mos7840_get_modem_info(mos7840_port,
+ (unsigned int *)arg);
+
+ case TIOCGSERIAL:
+ dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ return mos7840_get_serial_info(mos7840_port,
+ (struct serial_struct *)arg);
+
+ case TIOCSSERIAL:
+ dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ break;
+
+ case TIOCMIWAIT:
+ dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ cprev = mos7840_port->icount;
+ while (1) {
+ //interruptible_sleep_on(&mos7840_port->delta_msr_wait);
+ mos7840_port->delta_msr_cond = 0;
+ wait_event_interruptible(mos7840_port->delta_msr_wait,
+ (mos7840_port->
+ delta_msr_cond == 1));
+
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ cnow = mos7840_port->icount;
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ return 0;
+ }
+ cprev = cnow;
+ }
+ /* NOTREACHED */
+ break;
+
+ case TIOCGICOUNT:
+ cnow = mos7840_port->icount;
+ icount.cts = cnow.cts;
+ icount.dsr = cnow.dsr;
+ icount.rng = cnow.rng;
+ icount.dcd = cnow.dcd;
+ icount.rx = cnow.rx;
+ icount.tx = cnow.tx;
+ icount.frame = cnow.frame;
+ icount.overrun = cnow.overrun;
+ icount.parity = cnow.parity;
+ icount.brk = cnow.brk;
+ icount.buf_overrun = cnow.buf_overrun;
+
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
+ port->number, icount.rx, icount.tx);
+ if (copy_to_user((void *)arg, &icount, sizeof(icount)))
+ return -EFAULT;
+ return 0;
+
+ case TIOCEXBAUD:
+ return 0;
+ default:
+ break;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int mos7840_calc_num_ports(struct usb_serial *serial)
+{
+
+ dbg("numberofendpoints: %d \n",
+ (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
+ dbg("numberofendpoints: %d \n",
+ (int)serial->interface->altsetting->desc.bNumEndpoints);
+ if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
+ mos7840_num_ports = 2;
+ serial->type->num_ports = 2;
+ } else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
+ mos7840_num_ports = 4;
+ serial->type->num_bulk_in = 4;
+ serial->type->num_bulk_out = 4;
+ serial->type->num_ports = 4;
+ }
+
+ return mos7840_num_ports;
+}
+
+/****************************************************************************
+ * mos7840_startup
+ ****************************************************************************/
+
+static int mos7840_startup(struct usb_serial *serial)
+{
+ struct moschip_port *mos7840_port;
+ struct usb_device *dev;
+ int i, status;
+
+ __u16 Data;
+ dbg("%s \n", " mos7840_startup :entering..........");
+
+ if (!serial) {
+ dbg("%s\n", "Invalid Handler");
+ return -1;
+ }
+
+ dev = serial->dev;
+
+ dbg("%s\n", "Entering...");
+
+ /* we set up the pointers to the endpoints in the mos7840_open *
+ * function, as the structures aren't created yet. */
+
+ /* set up port private structures */
+ for (i = 0; i < serial->num_ports; ++i) {
+ mos7840_port = kmalloc(sizeof(struct moschip_port), GFP_KERNEL);
+ if (mos7840_port == NULL) {
+ err("%s - Out of memory", __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(mos7840_port, 0, sizeof(struct moschip_port));
+
+ /* Initialize all port interrupt end point to port 0 int endpoint *
+ * Our device has only one interrupt end point comman to all port */
+
+ mos7840_port->port = serial->port[i];
+ mos7840_set_port_private(serial->port[i], mos7840_port);
+
+ mos7840_port->port_num = ((serial->port[i]->number -
+ (serial->port[i]->serial->minor)) +
+ 1);
+
+ if (mos7840_port->port_num == 1) {
+ mos7840_port->SpRegOffset = 0x0;
+ mos7840_port->ControlRegOffset = 0x1;
+ mos7840_port->DcrRegOffset = 0x4;
+ } else if ((mos7840_port->port_num == 2)
+ && (mos7840_num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0x8;
+ mos7840_port->ControlRegOffset = 0x9;
+ mos7840_port->DcrRegOffset = 0x16;
+ } else if ((mos7840_port->port_num == 2)
+ && (mos7840_num_ports == 2)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 3)
+ && (mos7840_num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 4)
+ && (mos7840_num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xc;
+ mos7840_port->ControlRegOffset = 0xd;
+ mos7840_port->DcrRegOffset = 0x1c;
+ }
+ mos7840_dump_serial_port(mos7840_port);
+
+ mos7840_set_port_private(serial->port[i], mos7840_port);
+
+ //enable rx_disable bit in control register
+
+ status =
+ mos7840_get_reg_sync(serial->port[i],
+ mos7840_port->ControlRegOffset, &Data);
+ if (status < 0) {
+ dbg("Reading ControlReg failed status-0x%x\n", status);
+ break;
+ } else
+ dbg("ControlReg Reading success val is %x, status%d\n",
+ Data, status);
+ Data |= 0x08; //setting driver done bit
+ Data |= 0x04; //sp1_bit to have cts change reflect in modem status reg
+
+ //Data |= 0x20; //rx_disable bit
+ status = 0;
+ status =
+ mos7840_set_reg_sync(serial->port[i],
+ mos7840_port->ControlRegOffset, Data);
+ if (status < 0) {
+ dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+ break;
+ } else
+ dbg("ControlReg Writing success(rx_disable) status%d\n",
+ status);
+
+ //Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3
+ Data = 0x01;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(serial->port[i],
+ (__u16) (mos7840_port->DcrRegOffset +
+ 0), Data);
+ if (status < 0) {
+ dbg("Writing DCR0 failed status-0x%x\n", status);
+ break;
+ } else
+ dbg("DCR0 Writing success status%d\n", status);
+
+ Data = 0x05;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(serial->port[i],
+ (__u16) (mos7840_port->DcrRegOffset +
+ 1), Data);
+ if (status < 0) {
+ dbg("Writing DCR1 failed status-0x%x\n", status);
+ break;
+ } else
+ dbg("DCR1 Writing success status%d\n", status);
+
+ Data = 0x24;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(serial->port[i],
+ (__u16) (mos7840_port->DcrRegOffset +
+ 2), Data);
+ if (status < 0) {
+ dbg("Writing DCR2 failed status-0x%x\n", status);
+ break;
+ } else
+ dbg("DCR2 Writing success status%d\n", status);
+
+ // write values in clkstart0x0 and clkmulti 0x20
+ Data = 0x0;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(serial->port[i],
+ CLK_START_VALUE_REGISTER, Data);
+ if (status < 0) {
+ dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+ break;
+ } else
+ dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+
+ Data = 0x20;
+ status = 0;
+ status =
+ mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
+ Data);
+ if (status < 0) {
+ dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
+ status);
+ break;
+ } else
+ dbg("CLK_MULTI_REGISTER Writing success status%d\n",
+ status);
+
+ //write value 0x0 to scratchpad register
+ Data = 0x00;
+ status = 0;
+ status =
+ mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER,
+ Data);
+ if (status < 0) {
+ dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
+ status);
+ break;
+ } else
+ dbg("SCRATCH_PAD_REGISTER Writing success status%d\n",
+ status);
+
+ //Zero Length flag register
+ if ((mos7840_port->port_num != 1)
+ && (mos7840_num_ports == 2)) {
+
+ Data = 0xff;
+ status = 0;
+ status = mos7840_set_reg_sync(serial->port[i],
+ (__u16) (ZLP_REG1 +
+ ((__u16)
+ mos7840_port->
+ port_num)),
+ Data);
+ dbg("ZLIP offset%x\n",
+ (__u16) (ZLP_REG1 +
+ ((__u16) mos7840_port->port_num)));
+ if (status < 0) {
+ dbg("Writing ZLP_REG%d failed status-0x%x\n",
+ i + 2, status);
+ break;
+ } else
+ dbg("ZLP_REG%d Writing success status%d\n",
+ i + 2, status);
+ } else {
+ Data = 0xff;
+ status = 0;
+ status = mos7840_set_reg_sync(serial->port[i],
+ (__u16) (ZLP_REG1 +
+ ((__u16)
+ mos7840_port->
+ port_num) -
+ 0x1), Data);
+ dbg("ZLIP offset%x\n",
+ (__u16) (ZLP_REG1 +
+ ((__u16) mos7840_port->port_num) - 0x1));
+ if (status < 0) {
+ dbg("Writing ZLP_REG%d failed status-0x%x\n",
+ i + 1, status);
+ break;
+ } else
+ dbg("ZLP_REG%d Writing success status%d\n",
+ i + 1, status);
+
+ }
+ mos7840_port->control_urb = usb_alloc_urb(0, SLAB_ATOMIC);
+ mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
+
+ }
+
+ //Zero Length flag enable
+ Data = 0x0f;
+ status = 0;
+ status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
+ if (status < 0) {
+ dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
+ return -1;
+ } else
+ dbg("ZLP_REG5 Writing success status%d\n", status);
+
+ /* setting configuration feature to one */
+ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ (__u8) 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 5 * HZ);
+ return 0;
+}
+
+/****************************************************************************
+ * mos7840_shutdown
+ * This function is called whenever the device is removed from the usb bus.
+ ****************************************************************************/
+
+static void mos7840_shutdown(struct usb_serial *serial)
+{
+ int i;
+ struct moschip_port *mos7840_port;
+ dbg("%s \n", " shutdown :entering..........");
+
+ if (!serial) {
+ dbg("%s", "Invalid Handler \n");
+ return;
+ }
+
+ /* check for the ports to be closed,close the ports and disconnect */
+
+ /* free private structure allocated for serial port *
+ * stop reads and writes on all ports */
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ mos7840_port = mos7840_get_port_private(serial->port[i]);
+ kfree(mos7840_port->ctrl_buf);
+ usb_kill_urb(mos7840_port->control_urb);
+ kfree(mos7840_port);
+ mos7840_set_port_private(serial->port[i], NULL);
+ }
+
+ dbg("%s\n", "Thank u :: ");
+
+}
+
+static struct usb_serial_driver moschip7840_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mos7840",
+ },
+ .description = DRIVER_DESC,
+ .id_table = moschip_port_id_table,
+ .num_interrupt_in = 1, //NUM_DONT_CARE,//1,
+#ifdef check
+ .num_bulk_in = 4,
+ .num_bulk_out = 4,
+ .num_ports = 4,
+#endif
+ .open = mos7840_open,
+ .close = mos7840_close,
+ .write = mos7840_write,
+ .write_room = mos7840_write_room,
+ .chars_in_buffer = mos7840_chars_in_buffer,
+ .throttle = mos7840_throttle,
+ .unthrottle = mos7840_unthrottle,
+ .calc_num_ports = mos7840_calc_num_ports,
+#ifdef MCSSerialProbe
+ .probe = mos7840_serial_probe,
+#endif
+ .ioctl = mos7840_ioctl,
+ .set_termios = mos7840_set_termios,
+ .break_ctl = mos7840_break,
+ .tiocmget = mos7840_tiocmget,
+ .tiocmset = mos7840_tiocmset,
+ .attach = mos7840_startup,
+ .shutdown = mos7840_shutdown,
+ .read_bulk_callback = mos7840_bulk_in_callback,
+ .read_int_callback = mos7840_interrupt_callback,
+};
+
+static struct usb_driver io_driver = {
+ .name = "mos7840",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = moschip_id_table_combined,
+};
+
+/****************************************************************************
+ * moschip7840_init
+ * This is called by the module subsystem, or on startup to initialize us
+ ****************************************************************************/
+static int __init moschip7840_init(void)
+{
+ int retval;
+
+ dbg("%s \n", " mos7840_init :entering..........");
+
+ /* Register with the usb serial */
+ retval = usb_serial_register(&moschip7840_4port_device);
+
+ if (retval)
+ goto failed_port_device_register;
+
+ dbg("%s\n", "Entring...");
+ info(DRIVER_DESC " " DRIVER_VERSION);
+
+ /* Register with the usb */
+ retval = usb_register(&io_driver);
+
+ if (retval)
+ goto failed_usb_register;
+
+ if (retval == 0) {
+ dbg("%s\n", "Leaving...");
+ return 0;
+ }
+
+ failed_usb_register:
+ usb_serial_deregister(&moschip7840_4port_device);
+
+ failed_port_device_register:
+
+ return retval;
+}
+
+/****************************************************************************
+ * moschip7840_exit
+ * Called when the driver is about to be unloaded.
+ ****************************************************************************/
+static void __exit moschip7840_exit(void)
+{
+
+ dbg("%s \n", " mos7840_exit :entering..........");
+
+ usb_deregister(&io_driver);
+
+ usb_serial_deregister(&moschip7840_4port_device);
+
+ dbg("%s\n", "Entring...");
+}
+
+module_init(moschip7840_init);
+module_exit(moschip7840_exit);
+
+/* Module information */
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 65e4d04..1036d43 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -81,10 +81,11 @@
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
+ { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver pl2303_driver = {
.name = "pl2303",
@@ -127,65 +128,6 @@
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
-/* function prototypes for a PL2303 serial converter */
-static int pl2303_open (struct usb_serial_port *port, struct file *filp);
-static void pl2303_close (struct usb_serial_port *port, struct file *filp);
-static void pl2303_set_termios (struct usb_serial_port *port,
- struct termios *old);
-static int pl2303_ioctl (struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg);
-static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs);
-static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static int pl2303_write (struct usb_serial_port *port,
- const unsigned char *buf, int count);
-static void pl2303_send (struct usb_serial_port *port);
-static int pl2303_write_room(struct usb_serial_port *port);
-static int pl2303_chars_in_buffer(struct usb_serial_port *port);
-static void pl2303_break_ctl(struct usb_serial_port *port,int break_state);
-static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file);
-static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear);
-static int pl2303_startup (struct usb_serial *serial);
-static void pl2303_shutdown (struct usb_serial *serial);
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size);
-static void pl2303_buf_free(struct pl2303_buf *pb);
-static void pl2303_buf_clear(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
- unsigned int count);
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
- unsigned int count);
-
-
-/* All of the device info needed for the PL2303 SIO serial converter */
-static struct usb_serial_driver pl2303_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "pl2303",
- },
- .id_table = id_table,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = pl2303_open,
- .close = pl2303_close,
- .write = pl2303_write,
- .ioctl = pl2303_ioctl,
- .break_ctl = pl2303_break_ctl,
- .set_termios = pl2303_set_termios,
- .tiocmget = pl2303_tiocmget,
- .tiocmset = pl2303_tiocmset,
- .read_bulk_callback = pl2303_read_bulk_callback,
- .read_int_callback = pl2303_read_int_callback,
- .write_bulk_callback = pl2303_write_bulk_callback,
- .write_room = pl2303_write_room,
- .chars_in_buffer = pl2303_chars_in_buffer,
- .attach = pl2303_startup,
- .shutdown = pl2303_shutdown,
-};
enum pl2303_type {
type_0, /* don't know the difference between type 0 and */
@@ -204,8 +146,166 @@
enum pl2303_type type;
};
+/*
+ * pl2303_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
+{
+ struct pl2303_buf *pb;
-static int pl2303_startup (struct usb_serial *serial)
+ if (size == 0)
+ return NULL;
+
+ pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+ if (pb == NULL)
+ return NULL;
+
+ pb->buf_buf = kmalloc(size, GFP_KERNEL);
+ if (pb->buf_buf == NULL) {
+ kfree(pb);
+ return NULL;
+ }
+
+ pb->buf_size = size;
+ pb->buf_get = pb->buf_put = pb->buf_buf;
+
+ return pb;
+}
+
+/*
+ * pl2303_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+static void pl2303_buf_free(struct pl2303_buf *pb)
+{
+ if (pb) {
+ kfree(pb->buf_buf);
+ kfree(pb);
+ }
+}
+
+/*
+ * pl2303_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+static void pl2303_buf_clear(struct pl2303_buf *pb)
+{
+ if (pb != NULL)
+ pb->buf_get = pb->buf_put;
+ /* equivalent to a get of all data available */
+}
+
+/*
+ * pl2303_buf_data_avail
+ *
+ * Return the number of bytes of data available in the circular
+ * buffer.
+ */
+static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
+{
+ if (pb == NULL)
+ return 0;
+
+ return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+}
+
+/*
+ * pl2303_buf_space_avail
+ *
+ * Return the number of bytes of space available in the circular
+ * buffer.
+ */
+static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
+{
+ if (pb == NULL)
+ return 0;
+
+ return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+}
+
+/*
+ * pl2303_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
+ unsigned int count)
+{
+ unsigned int len;
+
+ if (pb == NULL)
+ return 0;
+
+ len = pl2303_buf_space_avail(pb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = pb->buf_buf + pb->buf_size - pb->buf_put;
+ if (count > len) {
+ memcpy(pb->buf_put, buf, len);
+ memcpy(pb->buf_buf, buf+len, count - len);
+ pb->buf_put = pb->buf_buf + count - len;
+ } else {
+ memcpy(pb->buf_put, buf, count);
+ if (count < len)
+ pb->buf_put += count;
+ else /* count == len */
+ pb->buf_put = pb->buf_buf;
+ }
+
+ return count;
+}
+
+/*
+ * pl2303_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
+ unsigned int count)
+{
+ unsigned int len;
+
+ if (pb == NULL)
+ return 0;
+
+ len = pl2303_buf_data_avail(pb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = pb->buf_buf + pb->buf_size - pb->buf_get;
+ if (count > len) {
+ memcpy(buf, pb->buf_get, len);
+ memcpy(buf+len, pb->buf_buf, count - len);
+ pb->buf_get = pb->buf_buf + count - len;
+ } else {
+ memcpy(buf, pb->buf_get, count);
+ if (count < len)
+ pb->buf_get += count;
+ else /* count == len */
+ pb->buf_get = pb->buf_buf;
+ }
+
+ return count;
+}
+
+static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_private *priv;
enum pl2303_type type = type_0;
@@ -247,36 +347,17 @@
return -ENOMEM;
}
-static int set_control_lines (struct usb_device *dev, u8 value)
+static int set_control_lines(struct usb_device *dev, u8 value)
{
int retval;
- retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0),
- SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
- value, 0, NULL, 0, 100);
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
+ value, 0, NULL, 0, 100);
dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval);
return retval;
}
-static int pl2303_write (struct usb_serial_port *port, const unsigned char *buf, int count)
-{
- struct pl2303_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
-
- dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
-
- if (!count)
- return count;
-
- spin_lock_irqsave(&priv->lock, flags);
- count = pl2303_buf_put(priv->buf, buf, count);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- pl2303_send(port);
-
- return count;
-}
-
static void pl2303_send(struct usb_serial_port *port)
{
int count, result;
@@ -293,7 +374,7 @@
}
count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
- port->bulk_out_size);
+ port->bulk_out_size);
if (count == 0) {
spin_unlock_irqrestore(&priv->lock, flags);
@@ -304,13 +385,15 @@
spin_unlock_irqrestore(&priv->lock, flags);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count,
+ port->write_urb->transfer_buffer);
port->write_urb->transfer_buffer_length = count;
port->write_urb->dev = port->serial->dev;
- result = usb_submit_urb (port->write_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb,"
+ " error %d\n", __FUNCTION__, result);
priv->write_urb_in_use = 0;
// TODO: reschedule pl2303_send
}
@@ -318,6 +401,26 @@
usb_serial_port_softint(port);
}
+static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
+ int count)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+
+ if (!count)
+ return count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ count = pl2303_buf_put(priv->buf, buf, count);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ pl2303_send(port);
+
+ return count;
+}
+
static int pl2303_write_room(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -350,7 +453,8 @@
return chars;
}
-static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void pl2303_set_termios(struct usb_serial_port *port,
+ struct termios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -371,7 +475,8 @@
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(port->tty->termios) = tty_std_termios;
- port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
+ HUPCL | CLOCAL;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
@@ -380,24 +485,24 @@
/* check that they really want us to change something */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s - nothing to change...", __FUNCTION__);
- return;
+ (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+ RELEVANT_IFLAG(old_termios->c_iflag))) {
+ dbg("%s - nothing to change...", __FUNCTION__);
+ return;
}
}
- buf = kzalloc (7, GFP_KERNEL);
+ buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
return;
}
-
- i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
- GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
- 0, 0, buf, 7, 100);
- dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+ i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+ dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
if (cflag & CSIZE) {
switch (cflag & CSIZE) {
@@ -429,7 +534,8 @@
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
default:
- dev_err(&port->dev, "pl2303 driver does not support the baudrate requested (fix it)\n");
+ dev_err(&port->dev, "pl2303 driver does not support"
+ " the baudrate requested (fix it)\n");
break;
}
dbg("%s - baud = %d", __FUNCTION__, baud);
@@ -469,10 +575,10 @@
dbg("%s - parity = none", __FUNCTION__);
}
- i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
- SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
- 0, 0, buf, 7, 100);
- dbg ("0x21:0x20:0:0 %d", i);
+ i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+ dbg("0x21:0x20:0:0 %d", i);
/* change control lines if we are switching to or from B0 */
spin_lock_irqsave(&priv->lock, flags);
@@ -488,13 +594,13 @@
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
-
+
buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
- i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
- GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
- 0, 0, buf, 7, 100);
- dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
+ i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+ dbg("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i,
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
if (cflag & CRTSCTS) {
@@ -503,18 +609,82 @@
index = 0x61;
else
index = 0x41;
- i = usb_control_msg(serial->dev,
+ i = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
VENDOR_WRITE_REQUEST,
VENDOR_WRITE_REQUEST_TYPE,
0x0, index, NULL, 0, 100);
- dbg ("0x40:0x1:0x0:0x%x %d", index, i);
+ dbg("0x40:0x1:0x0:0x%x %d", index, i);
}
- kfree (buf);
+ kfree(buf);
}
-static int pl2303_open (struct usb_serial_port *port, struct file *filp)
+static void pl2303_close(struct usb_serial_port *port, struct file *filp)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int c_cflag;
+ int bps;
+ long timeout;
+ wait_queue_t wait;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* wait for data to drain from the buffer */
+ spin_lock_irqsave(&priv->lock, flags);
+ timeout = PL2303_CLOSING_WAIT;
+ init_waitqueue_entry(&wait, current);
+ add_wait_queue(&port->tty->write_wait, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (pl2303_buf_data_avail(priv->buf) == 0 ||
+ timeout == 0 || signal_pending(current) ||
+ !usb_get_intfdata(port->serial->interface)) /* disconnect */
+ break;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ timeout = schedule_timeout(timeout);
+ spin_lock_irqsave(&priv->lock, flags);
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->tty->write_wait, &wait);
+ /* clear out any remaining data in the buffer */
+ pl2303_buf_clear(priv->buf);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* wait for characters to drain from the device */
+ /* (this is long enough for the entire 256 byte */
+ /* pl2303 hardware buffer to drain with no flow */
+ /* control for data rates of 1200 bps or more, */
+ /* for lower rates we should really know how much */
+ /* data is in the buffer to compute a delay */
+ /* that is not unnecessarily long) */
+ bps = tty_get_baud_rate(port->tty);
+ if (bps > 1200)
+ timeout = max((HZ*2560)/bps,HZ/10);
+ else
+ timeout = 2*HZ;
+ schedule_timeout_interruptible(timeout);
+
+ /* shutdown our urbs */
+ dbg("%s - shutting down urbs", __FUNCTION__);
+ usb_kill_urb(port->write_urb);
+ usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ if (port->tty) {
+ c_cflag = port->tty->termios->c_cflag;
+ if (c_cflag & HUPCL) {
+ /* drop DTR and RTS */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ set_control_lines(port->serial->dev, 0);
+ }
+ }
+}
+
+static int pl2303_open(struct usb_serial_port *port, struct file *filp)
{
struct termios tmp_termios;
struct usb_serial *serial = port->serial;
@@ -568,98 +738,35 @@
/* Setup termios */
if (port->tty) {
- pl2303_set_termios (port, &tmp_termios);
+ pl2303_set_termios(port, &tmp_termios);
}
//FIXME: need to assert RTS and DTR if CRTSCTS off
dbg("%s - submitting read urb", __FUNCTION__);
port->read_urb->dev = serial->dev;
- result = usb_submit_urb (port->read_urb, GFP_KERNEL);
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
- pl2303_close (port, NULL);
+ dev_err(&port->dev, "%s - failed submitting read urb,"
+ " error %d\n", __FUNCTION__, result);
+ pl2303_close(port, NULL);
return -EPROTO;
}
dbg("%s - submitting interrupt urb", __FUNCTION__);
port->interrupt_in_urb->dev = serial->dev;
- result = usb_submit_urb (port->interrupt_in_urb, GFP_KERNEL);
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
- dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result);
- pl2303_close (port, NULL);
+ dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+ " error %d\n", __FUNCTION__, result);
+ pl2303_close(port, NULL);
return -EPROTO;
}
return 0;
}
-
-static void pl2303_close (struct usb_serial_port *port, struct file *filp)
-{
- struct pl2303_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- /* wait for data to drain from the buffer */
- spin_lock_irqsave(&priv->lock, flags);
- timeout = PL2303_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&port->tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (pl2303_buf_data_avail(priv->buf) == 0
- || timeout == 0 || signal_pending(current)
- || !usb_get_intfdata(port->serial->interface)) /* disconnect */
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->tty->write_wait, &wait);
- /* clear out any remaining data in the buffer */
- pl2303_buf_clear(priv->buf);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- bps = tty_get_baud_rate(port->tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
- else
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
-
- /* shutdown our urbs */
- dbg("%s - shutting down urbs", __FUNCTION__);
- usb_kill_urb(port->write_urb);
- usb_kill_urb(port->read_urb);
- usb_kill_urb(port->interrupt_in_urb);
-
- if (port->tty) {
- c_cflag = port->tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore (&priv->lock, flags);
- set_control_lines (port->serial->dev, 0);
- }
- }
-}
-
-static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear)
+static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
@@ -668,7 +775,7 @@
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
if (set & TIOCM_RTS)
priv->line_control |= CONTROL_RTS;
if (set & TIOCM_DTR)
@@ -678,12 +785,12 @@
if (clear & TIOCM_DTR)
priv->line_control &= ~CONTROL_DTR;
control = priv->line_control;
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
- return set_control_lines (port->serial->dev, control);
+ return set_control_lines(port->serial->dev, control);
}
-static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file)
+static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
@@ -696,10 +803,10 @@
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
mcr = priv->line_control;
status = priv->line_status;
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
| ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -721,22 +828,22 @@
unsigned int status;
unsigned int changed;
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
prevstatus = priv->line_status;
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
-
- spin_lock_irqsave (&priv->lock, flags);
+
+ spin_lock_irqsave(&priv->lock, flags);
status = priv->line_status;
- spin_unlock_irqrestore (&priv->lock, flags);
-
+ spin_unlock_irqrestore(&priv->lock, flags);
+
changed=prevstatus^status;
-
+
if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
((arg & TIOCM_CD) && (changed & UART_DCD)) ||
@@ -749,7 +856,8 @@
return 0;
}
-static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
+static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
@@ -766,7 +874,7 @@
return -ENOIOCTLCMD;
}
-static void pl2303_break_ctl (struct usb_serial_port *port, int break_state)
+static void pl2303_break_ctl(struct usb_serial_port *port, int break_state)
{
struct usb_serial *serial = port->serial;
u16 state;
@@ -780,15 +888,14 @@
state = BREAK_ON;
dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on");
- result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
- BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
- 0, NULL, 0, 100);
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
+ 0, NULL, 0, 100);
if (result)
dbg("%s - error sending break = %d", __FUNCTION__, result);
}
-
-static void pl2303_shutdown (struct usb_serial *serial)
+static void pl2303_shutdown(struct usb_serial *serial)
{
int i;
struct pl2303_private *priv;
@@ -802,7 +909,7 @@
kfree(priv);
usb_set_serial_port_data(serial->port[i], NULL);
}
- }
+ }
}
static void pl2303_update_line_status(struct usb_serial_port *port,
@@ -814,29 +921,33 @@
unsigned long flags;
u8 status_idx = UART_STATE;
u8 length = UART_STATE + 1;
+ u16 idv, idp;
- if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
- (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 ||
- le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 ||
- le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) {
- length = 1;
- status_idx = 0;
+ idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
+ idp = le16_to_cpu(port->serial->dev->descriptor.idProduct);
+
+
+ if (idv == SIEMENS_VENDOR_ID) {
+ if (idp == SIEMENS_PRODUCT_ID_X65 ||
+ idp == SIEMENS_PRODUCT_ID_SX1 ||
+ idp == SIEMENS_PRODUCT_ID_X75) {
+
+ length = 1;
+ status_idx = 0;
+ }
}
if (actual_length < length)
- goto exit;
+ return;
/* Save off the uart status for others to look at */
spin_lock_irqsave(&priv->lock, flags);
priv->line_status = data[status_idx];
spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible (&priv->delta_msr_wait);
-
-exit:
- return;
+ wake_up_interruptible(&priv->delta_msr_wait);
}
-static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs)
+static void pl2303_read_int_callback(struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
unsigned char *data = urb->transfer_buffer;
@@ -853,25 +964,29 @@
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ urb->status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ urb->status);
goto exit;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ urb->actual_length, urb->transfer_buffer);
+
pl2303_update_line_status(port, data, actual_length);
exit:
- status = usb_submit_urb (urb, GFP_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status)
- dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
+ dev_err(&urb->dev->dev,
+ "%s - usb_submit_urb failed with result %d\n",
__FUNCTION__, status);
}
-
-static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
+static void pl2303_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -892,20 +1007,25 @@
return;
}
if (urb->status == -EPROTO) {
- /* PL2303 mysteriously fails with -EPROTO reschedule the read */
- dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
+ /* PL2303 mysteriously fails with -EPROTO reschedule
+ * the read */
+ dbg("%s - caught -EPROTO, resubmitting the urb",
+ __FUNCTION__);
urb->status = 0;
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - failed"
+ " resubmitting read urb, error %d\n",
+ __FUNCTION__, result);
return;
}
dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ urb->actual_length, data);
/* get tty_flag from status */
tty_flag = TTY_NORMAL;
@@ -914,7 +1034,7 @@
status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- wake_up_interruptible (&priv->delta_msr_wait);
+ wake_up_interruptible(&priv->delta_msr_wait);
/* break takes precedence over parity, */
/* which takes precedence over framing errors */
@@ -933,8 +1053,8 @@
if (status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
for (i = 0; i < urb->actual_length; ++i)
- tty_insert_flip_char (tty, data[i], tty_flag);
- tty_flip_buffer_push (tty);
+ tty_insert_flip_char(tty, data[i], tty_flag);
+ tty_flip_buffer_push(tty);
}
/* Schedule the next read _if_ we are still open */
@@ -942,15 +1062,14 @@
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - failed resubmitting"
+ " read urb, error %d\n", __FUNCTION__, result);
}
return;
}
-
-
-static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
+static void pl2303_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -966,18 +1085,21 @@
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ urb->status);
priv->write_urb_in_use = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
dbg("%s - Overflow in write", __FUNCTION__);
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
+ urb->status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
- result = usb_submit_urb (port->write_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - failed resubmitting write"
+ " urb, error %d\n", __FUNCTION__, result);
else
return;
}
@@ -988,191 +1110,38 @@
pl2303_send(port);
}
+/* All of the device info needed for the PL2303 SIO serial converter */
+static struct usb_serial_driver pl2303_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pl2303",
+ },
+ .id_table = id_table,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .open = pl2303_open,
+ .close = pl2303_close,
+ .write = pl2303_write,
+ .ioctl = pl2303_ioctl,
+ .break_ctl = pl2303_break_ctl,
+ .set_termios = pl2303_set_termios,
+ .tiocmget = pl2303_tiocmget,
+ .tiocmset = pl2303_tiocmset,
+ .read_bulk_callback = pl2303_read_bulk_callback,
+ .read_int_callback = pl2303_read_int_callback,
+ .write_bulk_callback = pl2303_write_bulk_callback,
+ .write_room = pl2303_write_room,
+ .chars_in_buffer = pl2303_chars_in_buffer,
+ .attach = pl2303_startup,
+ .shutdown = pl2303_shutdown,
+};
-/*
- * pl2303_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
-{
-
- struct pl2303_buf *pb;
-
-
- if (size == 0)
- return NULL;
-
- pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
- if (pb == NULL)
- return NULL;
-
- pb->buf_buf = kmalloc(size, GFP_KERNEL);
- if (pb->buf_buf == NULL) {
- kfree(pb);
- return NULL;
- }
-
- pb->buf_size = size;
- pb->buf_get = pb->buf_put = pb->buf_buf;
-
- return pb;
-
-}
-
-
-/*
- * pl2303_buf_free
- *
- * Free the buffer and all associated memory.
- */
-
-static void pl2303_buf_free(struct pl2303_buf *pb)
-{
- if (pb) {
- kfree(pb->buf_buf);
- kfree(pb);
- }
-}
-
-
-/*
- * pl2303_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-
-static void pl2303_buf_clear(struct pl2303_buf *pb)
-{
- if (pb != NULL)
- pb->buf_get = pb->buf_put;
- /* equivalent to a get of all data available */
-}
-
-
-/*
- * pl2303_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
-{
- if (pb != NULL)
- return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
- else
- return 0;
-}
-
-
-/*
- * pl2303_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
-{
- if (pb != NULL)
- return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
- else
- return 0;
-}
-
-
-/*
- * pl2303_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
- unsigned int count)
-{
-
- unsigned int len;
-
-
- if (pb == NULL)
- return 0;
-
- len = pl2303_buf_space_avail(pb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = pb->buf_buf + pb->buf_size - pb->buf_put;
- if (count > len) {
- memcpy(pb->buf_put, buf, len);
- memcpy(pb->buf_buf, buf+len, count - len);
- pb->buf_put = pb->buf_buf + count - len;
- } else {
- memcpy(pb->buf_put, buf, count);
- if (count < len)
- pb->buf_put += count;
- else /* count == len */
- pb->buf_put = pb->buf_buf;
- }
-
- return count;
-
-}
-
-
-/*
- * pl2303_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
- unsigned int count)
-{
-
- unsigned int len;
-
-
- if (pb == NULL)
- return 0;
-
- len = pl2303_buf_data_avail(pb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = pb->buf_buf + pb->buf_size - pb->buf_get;
- if (count > len) {
- memcpy(buf, pb->buf_get, len);
- memcpy(buf+len, pb->buf_buf, count - len);
- pb->buf_get = pb->buf_buf + count - len;
- } else {
- memcpy(buf, pb->buf_get, count);
- if (count < len)
- pb->buf_get += count;
- else /* count == len */
- pb->buf_get = pb->buf_buf;
- }
-
- return count;
-
-}
-
-static int __init pl2303_init (void)
+static int __init pl2303_init(void)
{
int retval;
+
retval = usb_serial_register(&pl2303_device);
if (retval)
goto failed_usb_serial_register;
@@ -1187,14 +1156,12 @@
return retval;
}
-
-static void __exit pl2303_exit (void)
+static void __exit pl2303_exit(void)
{
- usb_deregister (&pl2303_driver);
- usb_serial_deregister (&pl2303_device);
+ usb_deregister(&pl2303_driver);
+ usb_serial_deregister(&pl2303_device);
}
-
module_init(pl2303_init);
module_exit(pl2303_exit);
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 55195e7..762cc29 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -89,3 +89,7 @@
/* Belkin "F5U257" Serial Adapter */
#define BELKIN_VENDOR_ID 0x050d
#define BELKIN_PRODUCT_ID 0x0257
+
+/* Alcor Micro Corp. USB 2.0 TO RS-232 */
+#define ALCOR_VENDOR_ID 0x058F
+#define ALCOR_PRODUCT_ID 0x9720
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e06a41b..0222d92 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -676,33 +676,29 @@
iface_desc = interface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
+
+ if (usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
dbg("found bulk in on endpoint %d", i);
bulk_in_endpoint[num_bulk_in] = endpoint;
++num_bulk_in;
}
- if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
+ if (usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
dbg("found bulk out on endpoint %d", i);
bulk_out_endpoint[num_bulk_out] = endpoint;
++num_bulk_out;
}
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x03)) {
+
+ if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dbg("found interrupt in on endpoint %d", i);
interrupt_in_endpoint[num_interrupt_in] = endpoint;
++num_interrupt_in;
}
- if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
- ((endpoint->bmAttributes & 3) == 0x03)) {
+ if (usb_endpoint_is_int_out(endpoint)) {
/* we found an interrupt out endpoint */
dbg("found interrupt out on endpoint %d", i);
interrupt_out_endpoint[num_interrupt_out] = endpoint;
@@ -716,14 +712,15 @@
if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
- (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID))) {
+ (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
+ ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) {
if (interface != dev->actconfig->interface[0]) {
/* check out the endpoints of the other interface*/
iface_desc = dev->actconfig->interface[0]->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x03)) {
+ if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dbg("found interrupt in for Prolific device on separate interface");
interrupt_in_endpoint[num_interrupt_in] = endpoint;
@@ -937,7 +934,10 @@
snprintf (&port->dev.bus_id[0], sizeof(port->dev.bus_id), "ttyUSB%d", port->number);
dbg ("%s - registering %s", __FUNCTION__, port->dev.bus_id);
- device_register (&port->dev);
+ retval = device_register(&port->dev);
+ if (retval)
+ dev_err(&port->dev, "Error registering port device, "
+ "continuing\n");
}
usb_serial_console_init (debug, minor);
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index be9eec2..86e48c4 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -135,6 +135,18 @@
this input in any keybinding software. (e.g. gnome's keyboard short-
cuts)
+config USB_STORAGE_KARMA
+ bool "Support for Rio Karma music player"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Rio Karma
+ USB interface.
+
+ This code places the Rio Karma into mass storage mode, enabling
+ it to be mounted as an ordinary filesystem. Performing an eject
+ on the resulting scsi device node returns the Karma to normal
+ operation.
+
config USB_LIBUSUAL
bool "The shared table of common (or usual) storage devices"
depends on USB
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 8cbba22..023969b 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -20,6 +20,7 @@
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index ab173b3..5b06f92 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -45,12 +45,6 @@
#include "debug.h"
#include "transport.h"
-#define RIO_MSC 0x08
-#define RIOP_INIT "RIOP\x00\x01\x08"
-#define RIOP_INIT_LEN 7
-#define RIO_SEND_LEN 40
-#define RIO_RECV_LEN 0x200
-
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us)
@@ -97,70 +91,3 @@
return (res ? -1 : 0);
}
-
-/* Place the Rio Karma into mass storage mode.
- *
- * The initialization begins by sending 40 bytes starting
- * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
- * packet with the high four bits set and everything else null.
- *
- * Next, we send RIOP\x80\x00\x08\x00. Each time, a 512 byte response
- * must be read, but we must loop until byte 5 in the response is 0x08,
- * indicating success. */
-int rio_karma_init(struct us_data *us)
-{
- int result, partial;
- char *recv;
- unsigned long timeout;
-
- // us->iobuf is big enough to hold cmd but not receive
- if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
- goto die_nomem;
-
- US_DEBUGP("Initializing Karma...\n");
-
- memset(us->iobuf, 0, RIO_SEND_LEN);
- memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
- us->iobuf, RIO_SEND_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
- recv, RIO_RECV_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- us->iobuf[4] = 0x80;
- us->iobuf[5] = 0;
- timeout = jiffies + msecs_to_jiffies(3000);
- for (;;) {
- US_DEBUGP("Sending init command\n");
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
- us->iobuf, RIO_SEND_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
- recv, RIO_RECV_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- if (recv[5] == RIO_MSC)
- break;
- if (time_after(jiffies, timeout))
- goto die;
- msleep(10);
- }
- US_DEBUGP("Karma initialized.\n");
- kfree(recv);
- return 0;
-
-die:
- kfree(recv);
-die_nomem:
- US_DEBUGP("Could not initialize karma.\n");
- return USB_STOR_TRANSPORT_FAILED;
-}
-
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 927f778..e2967a4 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -47,4 +47,3 @@
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-int rio_karma_init(struct us_data *us);
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
new file mode 100644
index 0000000..0d79ae5
--- /dev/null
+++ b/drivers/usb/storage/karma.c
@@ -0,0 +1,155 @@
+/* Driver for Rio Karma
+ *
+ * (c) 2006 Bob Copeland <me@bobcopeland.com>
+ * (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "debug.h"
+#include "karma.h"
+
+#define RIO_PREFIX "RIOP\x00"
+#define RIO_PREFIX_LEN 5
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
+#define RIO_ENTER_STORAGE 0x1
+#define RIO_LEAVE_STORAGE 0x2
+#define RIO_RESET 0xC
+
+extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *);
+
+struct karma_data {
+ int in_storage;
+ char *recv;
+};
+
+/*
+ * Send commands to Rio Karma.
+ *
+ * For each command we send 40 bytes starting 'RIOP\0' followed by
+ * the command number and a sequence number, which the device will ack
+ * with a 512-byte packet with the high four bits set and everything
+ * else null. Then we send 'RIOP\x80' followed by a zero and the
+ * sequence number, until byte 5 in the response repeats the sequence
+ * number.
+ */
+static int rio_karma_send_command(char cmd, struct us_data *us)
+{
+ int result, partial;
+ unsigned long timeout;
+ static unsigned char seq = 1;
+ struct karma_data *data = (struct karma_data *) us->extra;
+
+ US_DEBUGP("karma: sending command %04x\n", cmd);
+ memset(us->iobuf, 0, RIO_SEND_LEN);
+ memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN);
+ us->iobuf[5] = cmd;
+ us->iobuf[6] = seq;
+
+ timeout = jiffies + msecs_to_jiffies(6000);
+ for (;;) {
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ us->iobuf, RIO_SEND_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto err;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data->recv, RIO_RECV_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto err;
+
+ if (data->recv[5] == seq)
+ break;
+
+ if (time_after(jiffies, timeout))
+ goto err;
+
+ us->iobuf[4] = 0x80;
+ us->iobuf[5] = 0;
+ msleep(50);
+ }
+
+ seq++;
+ if (seq == 0)
+ seq = 1;
+
+ US_DEBUGP("karma: sent command %04x\n", cmd);
+ return 0;
+err:
+ US_DEBUGP("karma: command %04x failed\n", cmd);
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Trap START_STOP and READ_10 to leave/re-enter storage mode.
+ * Everything else is propagated to the normal bulk layer.
+ */
+int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int ret;
+ struct karma_data *data = (struct karma_data *) us->extra;
+
+ if (srb->cmnd[0] == READ_10 && !data->in_storage) {
+ ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+ if (ret)
+ return ret;
+
+ data->in_storage = 1;
+ return usb_stor_Bulk_transport(srb, us);
+ } else if (srb->cmnd[0] == START_STOP) {
+ ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us);
+ if (ret)
+ return ret;
+
+ data->in_storage = 0;
+ return rio_karma_send_command(RIO_RESET, us);
+ }
+ return usb_stor_Bulk_transport(srb, us);
+}
+
+static void rio_karma_destructor(void *extra)
+{
+ struct karma_data *data = (struct karma_data *) extra;
+ kfree(data->recv);
+}
+
+int rio_karma_init(struct us_data *us)
+{
+ int ret = 0;
+ struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
+ if (!data)
+ goto out;
+
+ data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO);
+ if (!data->recv) {
+ kfree(data);
+ goto out;
+ }
+
+ us->extra = data;
+ us->extra_destructor = rio_karma_destructor;
+ ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+ data->in_storage = (ret == 0);
+out:
+ return ret;
+}
diff --git a/drivers/usb/storage/karma.h b/drivers/usb/storage/karma.h
new file mode 100644
index 0000000..8a60972
--- /dev/null
+++ b/drivers/usb/storage/karma.h
@@ -0,0 +1,7 @@
+#ifndef _KARMA_USB_H
+#define _KARMA_USB_H
+
+extern int rio_karma_init(struct us_data *us);
+extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+#endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index b1ec4a7..599ad10 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -8,6 +8,7 @@
#include <linux/usb.h>
#include <linux/usb_usual.h>
#include <linux/vmalloc.h>
+#include <linux/kthread.h>
/*
*/
@@ -117,7 +118,7 @@
const struct usb_device_id *id)
{
unsigned long type;
- int rc;
+ struct task_struct* task;
unsigned long flags;
type = USB_US_TYPE(id->driver_info);
@@ -132,8 +133,9 @@
stat[type].fls |= USU_MOD_FL_THREAD;
spin_unlock_irqrestore(&usu_lock, flags);
- rc = kernel_thread(usu_probe_thread, (void*)type, CLONE_VM);
- if (rc < 0) {
+ task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type);
+ if (IS_ERR(task)) {
+ int rc = PTR_ERR(task);
printk(KERN_WARNING "libusual: "
"Unable to start the thread for %s: %d\n",
bias_names[type], rc);
@@ -175,8 +177,6 @@
int rc;
unsigned long flags;
- daemonize("libusual_%d", type); /* "usb-storage" is kinda too long */
-
/* A completion does not work here because it's counted. */
down(&usu_init_notify);
up(&usu_init_notify);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 313920d..f843a0b 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -135,6 +135,7 @@
struct usb_onetouch *onetouch;
struct input_dev *input_dev;
int pipe, maxp;
+ int error = -ENOMEM;
interface = ss->pusb_intf->cur_altsetting;
@@ -211,15 +212,18 @@
ss->suspend_resume_hook = usb_onetouch_pm_hook;
#endif
- input_register_device(onetouch->dev);
+ error = input_register_device(onetouch->dev);
+ if (error)
+ goto fail3;
return 0;
+ fail3: usb_free_urb(onetouch->irq);
fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN,
onetouch->data, onetouch->data_dma);
fail1: kfree(onetouch);
input_free_device(input_dev);
- return -ENOMEM;
+ return error;
}
void onetouch_release_input(void *onetouch_)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a4b7df9..e1072d5 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -72,12 +72,27 @@
static int slave_alloc (struct scsi_device *sdev)
{
+ struct us_data *us = host_to_us(sdev->host);
+
/*
* Set the INQUIRY transfer length to 36. We don't use any of
* the extra data and many devices choke if asked for more or
* less than 36 bytes.
*/
sdev->inquiry_len = 36;
+
+ /*
+ * The UFI spec treates the Peripheral Qualifier bits in an
+ * INQUIRY result as reserved and requires devices to set them
+ * to 0. However the SCSI spec requires these bits to be set
+ * to 3 to indicate when a LUN is not present.
+ *
+ * Let the scanning code know if this target merely sets
+ * Peripheral Device Type to 0x1f to indicate no LUN.
+ */
+ if (us->subclass == US_SC_UFI)
+ sdev->sdev_target->pdt_1f_for_no_lun = 1;
+
return 0;
}
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index d6acc92..f23514c 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -294,11 +294,6 @@
return USB_STOR_XFER_ERROR;
return USB_STOR_XFER_STALLED;
- /* timeout or excessively long NAK */
- case -ETIMEDOUT:
- US_DEBUGP("-- timeout or NAK\n");
- return USB_STOR_XFER_ERROR;
-
/* babble - the device tried to send more than we wanted to read */
case -EOVERFLOW:
US_DEBUGP("-- babble\n");
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index b130e17..40bf159 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -218,10 +218,12 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE ),
+#ifdef CONFIG_USB_STORAGE_KARMA
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
"Rio",
"Rio Karma",
- US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
+ US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
+#endif
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
@@ -631,6 +633,13 @@
"Digital Camera EX-20 DSC",
US_SC_8070, US_PR_DEVICE, NULL, 0 ),
+/* Reported by <Hendryk.Pfeiffer@gmx.de> */
+UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
+ "LaCie",
+ "DVD+-RW",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_GO_SLOW ),
+
/* Submitted by Joel Bourquard <numlock@freesurf.ch>
* Some versions of this device need the SubClass and Protocol overrides
* while others don't.
@@ -1254,6 +1263,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
+/* Reported by Jan Mate <mate@fiit.stuba.sk> */
+UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
+ "Sony Ericsson",
+ "P990i",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
"Sony Ericsson",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 8d7bdcb..b8d6031 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -98,6 +98,9 @@
#ifdef CONFIG_USB_STORAGE_ALAUDA
#include "alauda.h"
#endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+#include "karma.h"
+#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
@@ -646,6 +649,14 @@
break;
#endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+ case US_PR_KARMA:
+ us->transport_name = "Rio Karma/Bulk";
+ us->transport = rio_karma_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ break;
+#endif
+
default:
return -EIO;
}
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index b362039..1b51d31 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -1,5 +1,5 @@
/*
- * USB Skeleton driver - 2.0
+ * USB Skeleton driver - 2.2
*
* Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
*
@@ -7,9 +7,8 @@
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
- * This driver is based on the 2.6.3 version of drivers/usb/usb-skeleton.c
- * but has been rewritten to be easy to read and use, as no locks are now
- * needed anymore.
+ * This driver is based on the 2.6.3 version of drivers/usb/usb-skeleton.c
+ * but has been rewritten to be easier to read and use.
*
*/
@@ -21,6 +20,7 @@
#include <linux/kref.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
+#include <linux/mutex.h>
/* Define these values to match your devices */
@@ -32,38 +32,39 @@
{ USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) },
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, skel_table);
+MODULE_DEVICE_TABLE(usb, skel_table);
/* Get a minor range for your devices from the usb maintainer */
#define USB_SKEL_MINOR_BASE 192
/* our private defines. if this grows any larger, use your own .h file */
-#define MAX_TRANSFER ( PAGE_SIZE - 512 )
+#define MAX_TRANSFER (PAGE_SIZE - 512)
#define WRITES_IN_FLIGHT 8
/* Structure to hold all of our device specific stuff */
struct usb_skel {
- struct usb_device * udev; /* the usb device for this device */
- struct usb_interface * interface; /* the interface for this device */
+ struct usb_device *dev; /* the usb device for this device */
+ struct usb_interface *interface; /* the interface for this device */
struct semaphore limit_sem; /* limiting the number of writes in progress */
- unsigned char * bulk_in_buffer; /* the buffer to receive data */
+ unsigned char *bulk_in_buffer; /* the buffer to receive data */
size_t bulk_in_size; /* the size of the receive buffer */
__u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */
__u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */
struct kref kref;
+ struct mutex io_mutex; /* synchronize I/O with disconnect */
};
#define to_skel_dev(d) container_of(d, struct usb_skel, kref)
static struct usb_driver skel_driver;
static void skel_delete(struct kref *kref)
-{
+{
struct usb_skel *dev = to_skel_dev(kref);
usb_put_dev(dev->udev);
- kfree (dev->bulk_in_buffer);
- kfree (dev);
+ kfree(dev->bulk_in_buffer);
+ kfree(dev);
}
static int skel_open(struct inode *inode, struct file *file)
@@ -89,6 +90,11 @@
goto exit;
}
+ /* prevent the device from being autosuspended */
+ retval = usb_autopm_get_interface(interface);
+ if (retval)
+ goto exit;
+
/* increment our usage count for the device */
kref_get(&dev->kref);
@@ -107,6 +113,12 @@
if (dev == NULL)
return -ENODEV;
+ /* allow the device to be autosuspended */
+ mutex_lock(&dev->io_mutex);
+ if (dev->interface)
+ usb_autopm_put_interface(dev->interface);
+ mutex_unlock(&dev->io_mutex);
+
/* decrement the count on our device */
kref_put(&dev->kref, skel_delete);
return 0;
@@ -115,11 +127,17 @@
static ssize_t skel_read(struct file *file, char *buffer, size_t count, loff_t *ppos)
{
struct usb_skel *dev;
- int retval = 0;
+ int retval;
int bytes_read;
dev = (struct usb_skel *)file->private_data;
-
+
+ mutex_lock(&dev->io_mutex);
+ if (!dev->interface) { /* disconnect() was called */
+ retval = -ENODEV;
+ goto exit;
+ }
+
/* do a blocking bulk read to get data from the device */
retval = usb_bulk_msg(dev->udev,
usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr),
@@ -135,6 +153,8 @@
retval = bytes_read;
}
+exit:
+ mutex_unlock(&dev->io_mutex);
return retval;
}
@@ -145,16 +165,16 @@
dev = (struct usb_skel *)urb->context;
/* sync/async unlink faults aren't errors */
- if (urb->status &&
- !(urb->status == -ENOENT ||
+ if (urb->status &&
+ !(urb->status == -ENOENT ||
urb->status == -ECONNRESET ||
urb->status == -ESHUTDOWN)) {
- dbg("%s - nonzero write bulk status received: %d",
+ err("%s - nonzero write bulk status received: %d",
__FUNCTION__, urb->status);
}
/* free up our allocated buffer */
- usb_buffer_free(urb->dev, urb->transfer_buffer_length,
+ usb_buffer_free(urb->dev, urb->transfer_buffer_length,
urb->transfer_buffer, urb->transfer_dma);
up(&dev->limit_sem);
}
@@ -179,6 +199,12 @@
goto exit;
}
+ mutex_lock(&dev->io_mutex);
+ if (!dev->interface) { /* disconnect() was called */
+ retval = -ENODEV;
+ goto error;
+ }
+
/* create a urb, and a buffer for it, and copy the data to the urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
@@ -213,17 +239,22 @@
/* release our reference to this urb, the USB core will eventually free it entirely */
usb_free_urb(urb);
-exit:
+ mutex_unlock(&dev->io_mutex);
return writesize;
error:
- usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma);
- usb_free_urb(urb);
+ if (urb) {
+ usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma);
+ usb_free_urb(urb);
+ }
+ mutex_unlock(&dev->io_mutex);
up(&dev->limit_sem);
+
+exit:
return retval;
}
-static struct file_operations skel_fops = {
+static const struct file_operations skel_fops = {
.owner = THIS_MODULE,
.read = skel_read,
.write = skel_write,
@@ -231,7 +262,7 @@
.release = skel_release,
};
-/*
+/*
* usb class driver info in order to get a minor number from the usb core,
* and to have the device registered with the driver core
*/
@@ -243,7 +274,7 @@
static int skel_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
- struct usb_skel *dev = NULL;
+ struct usb_skel *dev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
size_t buffer_size;
@@ -252,12 +283,13 @@
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL) {
+ if (!dev) {
err("Out of memory");
goto error;
}
kref_init(&dev->kref);
sema_init(&dev->limit_sem, WRITES_IN_FLIGHT);
+ mutex_init(&dev->io_mutex);
dev->udev = usb_get_dev(interface_to_usbdev(interface));
dev->interface = interface;
@@ -269,10 +301,7 @@
endpoint = &iface_desc->endpoint[i].desc;
if (!dev->bulk_in_endpointAddr &&
- ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
+ usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
dev->bulk_in_size = buffer_size;
@@ -285,10 +314,7 @@
}
if (!dev->bulk_out_endpointAddr &&
- ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_OUT) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
+ usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
dev->bulk_out_endpointAddr = endpoint->bEndpointAddress;
}
@@ -334,6 +360,11 @@
/* give back our minor */
usb_deregister_dev(interface, &skel_class);
+ /* prevent more I/O from starting */
+ mutex_lock(&dev->io_mutex);
+ dev->interface = NULL;
+ mutex_unlock(&dev->io_mutex);
+
unlock_kernel();
/* decrement our usage count */
@@ -367,7 +398,7 @@
usb_deregister(&skel_driver);
}
-module_init (usb_skel_init);
-module_exit (usb_skel_exit);
+module_init(usb_skel_init);
+module_exit(usb_skel_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index e308ed2..365de5d 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2621,25 +2621,28 @@
}
-int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct radeonfb_info *rinfo = info->par;
int i;
- if (state.event == pdev->dev.power.power_state.event)
+ if (mesg.event == pdev->dev.power.power_state.event)
return 0;
- printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
- pci_name(pdev), state.event);
+ printk(KERN_DEBUG "radeonfb (%s): suspending for event: %d...\n",
+ pci_name(pdev), mesg.event);
/* For suspend-to-disk, we cheat here. We don't suspend anything and
* let fbcon continue drawing until we are all set. That shouldn't
* really cause any problem at this point, provided that the wakeup
* code knows that any state in memory may not match the HW
*/
- if (state.event == PM_EVENT_FREEZE)
+ switch (mesg.event) {
+ case PM_EVENT_FREEZE: /* about to take snapshot */
+ case PM_EVENT_PRETHAW: /* before restoring snapshot */
goto done;
+ }
acquire_console_sem();
@@ -2706,7 +2709,7 @@
release_console_sem();
done:
- pdev->dev.power.power_state = state;
+ pdev->dev.power.power_state = mesg;
return 0;
}
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index ffc72ae..fe14883 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -20,7 +20,7 @@
#include <asm/cpu/dac.h>
#include <asm/hp6xx/hp6xx.h>
-#include <asm/hd64461/hd64461.h>
+#include <asm/hd64461.h>
#define HP680_MAX_INTENSITY 255
#define HP680_DEFAULT_INTENSITY 10
@@ -163,6 +163,6 @@
module_init(hp680bl_init);
module_exit(hp680bl_exit);
-MODULE_AUTHOR("Andriy Skulysh <askulysh@image.kiev.ua>");
+MODULE_AUTHOR("Andriy Skulysh <askulysh@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 680 Backlight Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 4444bef..aa3935d 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH
default y
help
Saying Y here will allow you to use Linux in text mode through a
diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c
index 4cc6b45..3afb472 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/hitfb.c
@@ -4,7 +4,7 @@
* (C) 1999 Mihai Spatar
* (C) 2000 YAEGASHI Takeshi
* (C) 2003, 2004 Paul Mundt
- * (C) 2003, 2004 Andriy Skulysh
+ * (C) 2003, 2004, 2006 Andriy Skulysh
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
@@ -20,18 +20,16 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/fb.h>
#include <asm/machvec.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/hd64461/hd64461.h>
-
-#ifdef MACH_HP600
+#include <asm/hd64461.h>
#include <asm/cpu/dac.h>
#include <asm/hp6xx/hp6xx.h>
-#endif
#define WIDTH 640
@@ -45,7 +43,6 @@
static struct fb_fix_screeninfo hitfb_fix __initdata = {
.id = "Hitachi HD64461",
.type = FB_TYPE_PACKED_PIXELS,
- .ypanstep = 8,
.accel = FB_ACCEL_NONE,
};
@@ -73,26 +70,14 @@
if (truecolor)
saddr <<= 1;
- fb_writew(width, HD64461_BBTDWR);
- fb_writew(height, HD64461_BBTDHR);
+ fb_writew(width-1, HD64461_BBTDWR);
+ fb_writew(height-1, HD64461_BBTDHR);
fb_writew(saddr & 0xffff, HD64461_BBTDSARL);
fb_writew(saddr >> 16, HD64461_BBTDSARH);
}
-static inline void hitfb_accel_solidfill(int truecolor, u16 dx, u16 dy,
- u16 width, u16 height, u16 color)
-{
- hitfb_accel_set_dest(truecolor, dx, dy, width, height);
-
- fb_writew(0x00f0, HD64461_BBTROPR);
- fb_writew(16, HD64461_BBTMDR);
- fb_writew(color, HD64461_GRSCR);
-
- hitfb_accel_start(truecolor);
-}
-
static inline void hitfb_accel_bitblt(int truecolor, u16 sx, u16 sy, u16 dx,
u16 dy, u16 width, u16 height, u16 rop,
u32 mask_addr)
@@ -100,6 +85,8 @@
u32 saddr, daddr;
u32 maddr = 0;
+ height--;
+ width--;
fb_writew(rop, HD64461_BBTROPR);
if ((sy < dy) || ((sy == dy) && (sx <= dx))) {
saddr = WIDTH * (sy + height) + sx + width;
@@ -146,6 +133,7 @@
if (rect->rop != ROP_COPY)
cfb_fillrect(p, rect);
else {
+ hitfb_accel_wait();
fb_writew(0x00f0, HD64461_BBTROPR);
fb_writew(16, HD64461_BBTMDR);
@@ -161,16 +149,15 @@
rect->height);
hitfb_accel_start(0);
}
- hitfb_accel_wait();
}
}
static void hitfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
{
+ hitfb_accel_wait();
hitfb_accel_bitblt(p->var.bits_per_pixel == 16, area->sx, area->sy,
area->dx, area->dy, area->width, area->height,
0x00cc, 0);
- hitfb_accel_wait();
}
static int hitfb_pan_display(struct fb_var_screeninfo *var,
@@ -182,7 +169,7 @@
if (xoffset != 0)
return -EINVAL;
- fb_writew(yoffset, HD64461_LCDCBAR);
+ fb_writew((yoffset*info->fix.line_length)>>10, HD64461_LCDCBAR);
return 0;
}
@@ -192,12 +179,6 @@
unsigned short v;
if (blank_mode) {
-#ifdef MACH_HP600
- sh_dac_disable(DAC_LCD_BRIGHTNESS);
- v = fb_readw(HD64461_GPBDR);
- v |= HD64461_GPBDR_LCDOFF;
- fb_writew(v, HD64461_GPBDR);
-#endif
v = fb_readw(HD64461_LDR1);
v &= ~HD64461_LDR1_DON;
fb_writew(v, HD64461_LDR1);
@@ -213,19 +194,18 @@
v = fb_readw(HD64461_STBCR);
v &= ~HD64461_STBCR_SLCDST;
fb_writew(v, HD64461_STBCR);
-#ifdef MACH_HP600
- sh_dac_enable(DAC_LCD_BRIGHTNESS);
- v = fb_readw(HD64461_GPBDR);
- v &= ~HD64461_GPBDR_LCDOFF;
- fb_writew(v, HD64461_GPBDR);
-#endif
+
+ v = fb_readw(HD64461_LCDCCR);
+ v &= ~(HD64461_LCDCCR_MOFF | HD64461_LCDCCR_STREQ);
+ fb_writew(v, HD64461_LCDCCR);
+
+ do {
+ v = fb_readw(HD64461_LCDCCR);
+ } while(v&HD64461_LCDCCR_STBACK);
+
v = fb_readw(HD64461_LDR1);
v |= HD64461_LDR1_DON;
fb_writew(v, HD64461_LDR1);
-
- v = fb_readw(HD64461_LCDCCR);
- v &= ~HD64461_LCDCCR_MOFF;
- fb_writew(v, HD64461_LCDCCR);
}
return 0;
}
@@ -233,7 +213,7 @@
static int hitfb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp, struct fb_info *info)
{
- if (regno >= info->cmap.len)
+ if (regno >= 256)
return 1;
switch (info->var.bits_per_pixel) {
@@ -244,6 +224,8 @@
fb_writew(blue >> 10, HD64461_CPTWDR);
break;
case 16:
+ if (regno >= 16)
+ return 1;
((u32 *) (info->pseudo_palette))[regno] =
((red & 0xf800)) |
((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
@@ -252,26 +234,113 @@
return 0;
}
+static int hitfb_sync(struct fb_info *info)
+{
+ hitfb_accel_wait();
+
+ return 0;
+}
+
+static int hitfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ int maxy;
+
+ var->xres = info->var.xres;
+ var->xres_virtual = info->var.xres;
+ var->yres = info->var.yres;
+
+ if ((var->bits_per_pixel != 8) && (var->bits_per_pixel != 16))
+ var->bits_per_pixel = info->var.bits_per_pixel;
+
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ maxy = info->fix.smem_len / var->xres;
+
+ if (var->bits_per_pixel == 16)
+ maxy /= 2;
+
+ if (var->yres_virtual > maxy)
+ var->yres_virtual = maxy;
+
+ var->xoffset = 0;
+ var->yoffset = 0;
+
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 0;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ case 16: /* RGB 565 */
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+ }
+
+ return 0;
+}
+
+static int hitfb_set_par(struct fb_info *info)
+{
+ unsigned short ldr3;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ info->fix.line_length = info->var.xres;
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ info->fix.ypanstep = 16;
+ break;
+ case 16:
+ info->fix.line_length = info->var.xres*2;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.ypanstep = 8;
+ break;
+ }
+
+ fb_writew(info->fix.line_length, HD64461_LCDCLOR);
+ ldr3 = fb_readw(HD64461_LDR3);
+ ldr3 &= ~15;
+ ldr3 |= (info->var.bits_per_pixel == 8) ? 4 : 8;
+ fb_writew(ldr3, HD64461_LDR3);
+ return 0;
+}
+
static struct fb_ops hitfb_ops = {
.owner = THIS_MODULE,
+ .fb_check_var = hitfb_check_var,
+ .fb_set_par = hitfb_set_par,
.fb_setcolreg = hitfb_setcolreg,
.fb_blank = hitfb_blank,
+ .fb_sync = hitfb_sync,
.fb_pan_display = hitfb_pan_display,
.fb_fillrect = hitfb_fillrect,
.fb_copyarea = hitfb_copyarea,
.fb_imageblit = cfb_imageblit,
};
-int __init hitfb_init(void)
+static int __init hitfb_probe(struct platform_device *dev)
{
unsigned short lcdclor, ldr3, ldvndr;
- int size;
if (fb_get_options("hitfb", NULL))
return -ENODEV;
+ hitfb_fix.mmio_start = CONFIG_HD64461_IOBASE+0x1000;
+ hitfb_fix.mmio_len = 0x1000;
hitfb_fix.smem_start = CONFIG_HD64461_IOBASE + 0x02000000;
- hitfb_fix.smem_len = (MACH_HP690) ? 1024 * 1024 : 512 * 1024;
+ hitfb_fix.smem_len = 512 * 1024;
lcdclor = fb_readw(HD64461_LCDCLOR);
ldvndr = fb_readw(HD64461_LDVNDR);
@@ -321,12 +390,12 @@
fb_info.var = hitfb_var;
fb_info.fix = hitfb_fix;
fb_info.pseudo_palette = pseudo_palette;
- fb_info.flags = FBINFO_DEFAULT;
+ fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
fb_info.screen_base = (void *)hitfb_fix.smem_start;
- size = (fb_info.var.bits_per_pixel == 8) ? 256 : 16;
- fb_alloc_cmap(&fb_info.cmap, size, 0);
+ fb_alloc_cmap(&fb_info.cmap, 256, 0);
if (register_framebuffer(&fb_info) < 0)
return -EINVAL;
@@ -336,9 +405,75 @@
return 0;
}
+static int __devexit hitfb_remove(struct platform_device *dev)
+{
+ return unregister_framebuffer(&fb_info);
+}
+
+#ifdef CONFIG_PM
+static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
+{
+ u16 v;
+
+ hitfb_blank(1,0);
+ v = fb_readw(HD64461_STBCR);
+ v |= HD64461_STBCR_SLCKE_IST;
+ fb_writew(v, HD64461_STBCR);
+
+ return 0;
+}
+
+static int hitfb_resume(struct platform_device *dev)
+{
+ u16 v;
+
+ v = fb_readw(HD64461_STBCR);
+ v &= ~HD64461_STBCR_SLCKE_OST;
+ msleep(100);
+ v = fb_readw(HD64461_STBCR);
+ v &= ~HD64461_STBCR_SLCKE_IST;
+ fb_writew(v, HD64461_STBCR);
+ hitfb_blank(0,0);
+
+ return 0;
+}
+#endif
+
+static struct platform_driver hitfb_driver = {
+ .probe = hitfb_probe,
+ .remove = __devexit_p(hitfb_remove),
+#ifdef CONFIG_PM
+ .suspend = hitfb_suspend,
+ .resume = hitfb_resume,
+#endif
+ .driver = {
+ .name = "hitfb",
+ },
+};
+
+static struct platform_device hitfb_device = {
+ .name = "hitfb",
+ .id = -1,
+};
+
+static int __init hitfb_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&hitfb_driver);
+ if (!ret) {
+ ret = platform_device_register(&hitfb_device);
+ if (ret)
+ platform_driver_unregister(&hitfb_driver);
+ }
+ return ret;
+}
+
+
static void __exit hitfb_exit(void)
{
- unregister_framebuffer(&fb_info);
+ platform_device_unregister(&hitfb_device);
+ platform_driver_unregister(&hitfb_driver);
}
module_init(hitfb_init);
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index c1f7b49..7d06b38 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -98,7 +98,6 @@
chan->algo.getsda = i810i2c_getsda;
chan->algo.getscl = i810i2c_getscl;
chan->algo.udelay = 10;
- chan->algo.mdelay = 10;
chan->algo.timeout = (HZ/2);
chan->algo.data = chan;
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index a6ca02f..d42edac 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -1554,15 +1554,17 @@
/***********************************************************************
* Power Management *
***********************************************************************/
-static int i810fb_suspend(struct pci_dev *dev, pm_message_t state)
+static int i810fb_suspend(struct pci_dev *dev, pm_message_t mesg)
{
struct fb_info *info = pci_get_drvdata(dev);
struct i810fb_par *par = info->par;
- par->cur_state = state.event;
+ par->cur_state = mesg.event;
- if (state.event == PM_EVENT_FREEZE) {
- dev->dev.power.power_state = state;
+ switch (mesg.event) {
+ case PM_EVENT_FREEZE:
+ case PM_EVENT_PRETHAW:
+ dev->dev.power.power_state = mesg;
return 0;
}
@@ -1578,7 +1580,7 @@
pci_save_state(dev);
pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
+ pci_set_power_state(dev, pci_choose_state(dev, mesg));
release_console_sem();
return 0;
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 57abbae..795c1a9 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -95,12 +95,12 @@
static struct i2c_algo_bit_data matrox_i2c_algo_template =
{
- NULL,
- matroxfb_gpio_setsda,
- matroxfb_gpio_setscl,
- matroxfb_gpio_getsda,
- matroxfb_gpio_getscl,
- 10, 10, 100,
+ .setsda = matroxfb_gpio_setsda,
+ .setscl = matroxfb_gpio_setscl,
+ .getsda = matroxfb_gpio_getsda,
+ .getscl = matroxfb_gpio_getscl,
+ .udelay = 10,
+ .timeout = 100,
};
static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo,
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index d4f8501..f8cd4c5 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -950,24 +950,25 @@
};
#ifdef CONFIG_PM
-static int nvidiafb_suspend(struct pci_dev *dev, pm_message_t state)
+static int nvidiafb_suspend(struct pci_dev *dev, pm_message_t mesg)
{
struct fb_info *info = pci_get_drvdata(dev);
struct nvidia_par *par = info->par;
+ if (mesg.event == PM_EVENT_PRETHAW)
+ mesg.event = PM_EVENT_FREEZE;
acquire_console_sem();
- par->pm_state = state.event;
+ par->pm_state = mesg.event;
- if (state.event == PM_EVENT_FREEZE) {
- dev->dev.power.power_state = state;
- } else {
+ if (mesg.event == PM_EVENT_SUSPEND) {
fb_set_suspend(info, 1);
nvidiafb_blank(FB_BLANK_POWERDOWN, info);
nvidia_write_regs(par, &par->SavedReg);
pci_save_state(dev);
pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
+ pci_set_power_state(dev, pci_choose_state(dev, mesg));
}
+ dev->dev.power.power_state = mesg;
release_console_sem();
return 0;
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 940ba2b..78dc59a 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -187,7 +187,7 @@
static unsigned int is_blanked = 0; /* Is the screen blanked? */
#ifdef CONFIG_SH_STORE_QUEUES
-static struct sq_mapping *pvr2fb_map;
+static unsigned long pvr2fb_map;
#endif
#ifdef CONFIG_SH_DMA
@@ -213,15 +213,17 @@
static int pvr2_init_cable(void);
static int pvr2_get_param(const struct pvr2_params *p, const char *s,
int val, int size);
+#ifdef CONFIG_SH_DMA
static ssize_t pvr2fb_write(struct file *file, const char *buf,
size_t count, loff_t *ppos);
+#endif
static struct fb_ops pvr2fb_ops = {
- .owner = THIS_MODULE,
- .fb_setcolreg = pvr2fb_setcolreg,
- .fb_blank = pvr2fb_blank,
- .fb_check_var = pvr2fb_check_var,
- .fb_set_par = pvr2fb_set_par,
+ .owner = THIS_MODULE,
+ .fb_setcolreg = pvr2fb_setcolreg,
+ .fb_blank = pvr2fb_blank,
+ .fb_check_var = pvr2fb_check_var,
+ .fb_set_par = pvr2fb_set_par,
#ifdef CONFIG_SH_DMA
.fb_write = pvr2fb_write,
#endif
@@ -783,7 +785,7 @@
goto out_err;
}
- fb_memset((unsigned long)fb_info->screen_base, 0, pvr2_fix.smem_len);
+ fb_memset(fb_info->screen_base, 0, pvr2_fix.smem_len);
pvr2_fix.ypanstep = nopan ? 0 : 1;
pvr2_fix.ywrapstep = nowrap ? 0 : 1;
@@ -820,7 +822,7 @@
modememused >> 10, (unsigned long)(fb_info->fix.smem_len >> 10));
printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n",
fb_info->node, fb_info->var.xres, fb_info->var.yres,
- fb_info->var.bits_per_pixel,
+ fb_info->var.bits_per_pixel,
get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel),
(char *)pvr2_get_param(cables, NULL, cable_type, 3),
(char *)pvr2_get_param(outputs, NULL, video_output, 3));
@@ -829,10 +831,10 @@
printk(KERN_NOTICE "fb%d: registering with SQ API\n", fb_info->node);
pvr2fb_map = sq_remap(fb_info->fix.smem_start, fb_info->fix.smem_len,
- fb_info->fix.id);
+ fb_info->fix.id, pgprot_val(PAGE_SHARED));
printk(KERN_NOTICE "fb%d: Mapped video memory to SQ addr 0x%lx\n",
- fb_info->node, pvr2fb_map->sq_addr);
+ fb_info->node, pvr2fb_map);
#endif
return 0;
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index e83befd..d7d810db 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -148,7 +148,6 @@
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->pcidev->dev;
chan->algo.udelay = 40;
- chan->algo.mdelay = 5;
chan->algo.timeout = 20;
chan->algo.data = chan;
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 461e094..82b3dea 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -2323,24 +2323,24 @@
}
}
-static int savagefb_suspend(struct pci_dev* dev, pm_message_t state)
+static int savagefb_suspend(struct pci_dev *dev, pm_message_t mesg)
{
struct fb_info *info = pci_get_drvdata(dev);
struct savagefb_par *par = info->par;
DBG("savagefb_suspend");
-
- par->pm_state = state.event;
+ if (mesg.event == PM_EVENT_PRETHAW)
+ mesg.event = PM_EVENT_FREEZE;
+ par->pm_state = mesg.event;
+ dev->dev.power.power_state = mesg;
/*
* For PM_EVENT_FREEZE, do not power down so the console
* can remain active.
*/
- if (state.event == PM_EVENT_FREEZE) {
- dev->dev.power.power_state = state;
+ if (mesg.event == PM_EVENT_FREEZE)
return 0;
- }
acquire_console_sem();
fb_set_suspend(info, 1);
@@ -2353,7 +2353,7 @@
savage_disable_mmio(par);
pci_save_state(dev);
pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
+ pci_set_power_state(dev, pci_choose_state(dev, mesg));
release_console_sem();
return 0;
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index eae50c9..7a7ec2d 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -204,7 +204,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = sb->s_blocksize;
inode->i_blocks = 0;
inode->i_rdev = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
@@ -950,9 +949,8 @@
inode->i_size = stat->length;
- inode->i_blksize = sb->s_blocksize;
inode->i_blocks =
- (inode->i_size + inode->i_blksize - 1) >> sb->s_blocksize_bits;
+ (inode->i_size + sb->s_blocksize - 1) >> sb->s_blocksize_bits;
}
/**
diff --git a/fs/Kconfig b/fs/Kconfig
index a270026..d311198 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -826,6 +826,25 @@
help
Exports the dump image of crashed kernel in ELF format.
+config PROC_SYSCTL
+ bool "Sysctl support (/proc/sys)" if EMBEDDED
+ depends on PROC_FS
+ select SYSCTL
+ default y
+ ---help---
+ The sysctl interface provides a means of dynamically changing
+ certain kernel parameters and variables on the fly without requiring
+ a recompile of the kernel or reboot of the system. The primary
+ interface is through /proc/sys. If you say Y here a tree of
+ modifiable sysctl entries will be generated beneath the
+ /proc/sys directory. They are explained in the files
+ in <file:Documentation/sysctl/>. Note that enabling this
+ option will enlarge the kernel by at least 8 KB.
+
+ As it is generally a good thing, you should say Y here unless
+ building a kernel for install/rescue disks or your system is very
+ limited in memory.
+
config SYSFS
bool "sysfs file system support" if EMBEDDED
default y
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index 534f3ee..7e7a04b 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -269,7 +269,6 @@
inode->i_ino = obj->file_id;
inode->i_size = obj->size;
inode->i_nlink = 2;
- inode->i_blksize = PAGE_SIZE;
inode->i_blocks = (inode->i_size + sb->s_blocksize - 1) >>
sb->s_blocksize_bits;
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index 8201101..9ade139 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -251,8 +251,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(adfs_inode_cachep))
- printk(KERN_INFO "adfs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(adfs_inode_cachep);
}
static struct super_operations adfs_sops = {
@@ -339,11 +338,10 @@
sb->s_flags |= MS_NODIRATIME;
- asb = kmalloc(sizeof(*asb), GFP_KERNEL);
+ asb = kzalloc(sizeof(*asb), GFP_KERNEL);
if (!asb)
return -ENOMEM;
sb->s_fs_info = asb;
- memset(asb, 0, sizeof(*asb));
/* set default options */
asb->s_uid = 0;
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 1735201..5ea72c3 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -109,8 +109,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(affs_inode_cachep))
- printk(KERN_INFO "affs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(affs_inode_cachep);
}
static struct super_operations affs_sops = {
@@ -280,11 +279,10 @@
sb->s_op = &affs_sops;
sb->s_flags |= MS_NODIRATIME;
- sbi = kmalloc(sizeof(struct affs_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct affs_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sb->s_fs_info = sbi;
- memset(sbi, 0, sizeof(*sbi));
init_MUTEX(&sbi->s_bmlock);
if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block,
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 4ebb30a..6f37754 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -72,7 +72,6 @@
inode->i_ctime.tv_sec = vnode->status.mtime_server;
inode->i_ctime.tv_nsec = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_version = vnode->fid.unique;
inode->i_mapping->a_ops = &afs_fs_aops;
diff --git a/fs/afs/vlocation.c b/fs/afs/vlocation.c
index 331f730..782ee7c 100644
--- a/fs/afs/vlocation.c
+++ b/fs/afs/vlocation.c
@@ -281,11 +281,10 @@
spin_unlock(&cell->vl_gylock);
/* not in the cell's in-memory lists - create a new record */
- vlocation = kmalloc(sizeof(struct afs_vlocation), GFP_KERNEL);
+ vlocation = kzalloc(sizeof(struct afs_vlocation), GFP_KERNEL);
if (!vlocation)
return -ENOMEM;
- memset(vlocation, 0, sizeof(struct afs_vlocation));
atomic_set(&vlocation->usage, 1);
INIT_LIST_HEAD(&vlocation->link);
rwlock_init(&vlocation->lock);
diff --git a/fs/afs/volume.c b/fs/afs/volume.c
index 0ff4b86..768c6db 100644
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -186,11 +186,10 @@
_debug("creating new volume record");
ret = -ENOMEM;
- volume = kmalloc(sizeof(struct afs_volume), GFP_KERNEL);
+ volume = kzalloc(sizeof(struct afs_volume), GFP_KERNEL);
if (!volume)
goto error_up;
- memset(volume, 0, sizeof(struct afs_volume));
atomic_set(&volume->usage, 1);
volume->type = type;
volume->type_force = force;
diff --git a/fs/autofs/inode.c b/fs/autofs/inode.c
index af2efbb..2c9759ba 100644
--- a/fs/autofs/inode.c
+++ b/fs/autofs/inode.c
@@ -129,10 +129,9 @@
struct autofs_sb_info *sbi;
int minproto, maxproto;
- sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
+ sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if ( !sbi )
goto fail_unlock;
- memset(sbi, 0, sizeof(*sbi));
DPRINTK(("autofs: starting up, sbi = %p\n",sbi));
s->s_fs_info = sbi;
@@ -217,7 +216,6 @@
inode->i_nlink = 2;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
inode->i_blocks = 0;
- inode->i_blksize = 1024;
if ( ino == AUTOFS_ROOT_INO ) {
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
@@ -242,7 +240,7 @@
inode->i_op = &autofs_symlink_inode_operations;
sl = &sbi->symlink[n];
- inode->u.generic_ip = sl;
+ inode->i_private = sl;
inode->i_mode = S_IFLNK | S_IRWXUGO;
inode->i_mtime.tv_sec = inode->i_ctime.tv_sec = sl->mtime;
inode->i_mtime.tv_nsec = inode->i_ctime.tv_nsec = 0;
diff --git a/fs/autofs/symlink.c b/fs/autofs/symlink.c
index 52e8772..c74f2eb 100644
--- a/fs/autofs/symlink.c
+++ b/fs/autofs/symlink.c
@@ -15,7 +15,7 @@
/* Nothing to release.. */
static void *autofs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
- char *s=((struct autofs_symlink *)dentry->d_inode->u.generic_ip)->data;
+ char *s=((struct autofs_symlink *)dentry->d_inode->i_private)->data;
nd_set_link(nd, s);
return NULL;
}
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 11a6a9a..800ce87 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -447,7 +447,6 @@
inode->i_uid = 0;
inode->i_gid = 0;
}
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 5100f984..27e17f9 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -137,7 +137,9 @@
nd.flags = LOOKUP_DIRECTORY;
ret = (dentry->d_op->d_revalidate)(dentry, &nd);
- if (!ret) {
+ if (ret <= 0) {
+ if (ret < 0)
+ status = ret;
dcache_dir_close(inode, file);
goto out;
}
@@ -400,13 +402,23 @@
struct autofs_sb_info *sbi = autofs4_sbi(dir->i_sb);
int oz_mode = autofs4_oz_mode(sbi);
int flags = nd ? nd->flags : 0;
- int status = 0;
+ int status = 1;
/* Pending dentry */
if (autofs4_ispending(dentry)) {
- if (!oz_mode)
- status = try_to_fill_dentry(dentry, flags);
- return !status;
+ /* The daemon never causes a mount to trigger */
+ if (oz_mode)
+ return 1;
+
+ /*
+ * A zero status is success otherwise we have a
+ * negative error code.
+ */
+ status = try_to_fill_dentry(dentry, flags);
+ if (status == 0)
+ return 1;
+
+ return status;
}
/* Negative dentry.. invalidate if "old" */
@@ -421,9 +433,19 @@
DPRINTK("dentry=%p %.*s, emptydir",
dentry, dentry->d_name.len, dentry->d_name.name);
spin_unlock(&dcache_lock);
- if (!oz_mode)
- status = try_to_fill_dentry(dentry, flags);
- return !status;
+ /* The daemon never causes a mount to trigger */
+ if (oz_mode)
+ return 1;
+
+ /*
+ * A zero status is success otherwise we have a
+ * negative error code.
+ */
+ status = try_to_fill_dentry(dentry, flags);
+ if (status == 0)
+ return 1;
+
+ return status;
}
spin_unlock(&dcache_lock);
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 50cfca5..57020c7 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -365,7 +365,6 @@
inode->i_mtime.tv_nsec = 0; /* lower 16 bits are not a time */
inode->i_ctime = inode->i_mtime;
inode->i_atime = inode->i_mtime;
- inode->i_blksize = befs_sb->block_size;
befs_ino->i_inode_num = fsrun_to_cpu(sb, raw_inode->inode_num);
befs_ino->i_parent = fsrun_to_cpu(sb, raw_inode->parent);
@@ -446,9 +445,7 @@
static void
befs_destroy_inodecache(void)
{
- if (kmem_cache_destroy(befs_inode_cachep))
- printk(KERN_ERR "befs_destroy_inodecache: "
- "not all structures were freed\n");
+ kmem_cache_destroy(befs_inode_cachep);
}
/*
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 26fad96..dcf04cb 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -102,7 +102,7 @@
inode->i_uid = current->fsuid;
inode->i_gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
- inode->i_blocks = inode->i_blksize = 0;
+ inode->i_blocks = 0;
inode->i_op = &bfs_file_inops;
inode->i_fop = &bfs_file_operations;
inode->i_mapping->a_ops = &bfs_aops;
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index cf74f3d..ed27ffb 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -76,7 +76,6 @@
inode->i_size = BFS_FILESIZE(di);
inode->i_blocks = BFS_FILEBLOCKS(di);
if (inode->i_size || inode->i_blocks) dprintf("Registered inode with %lld size, %ld blocks\n", inode->i_size, inode->i_blocks);
- inode->i_blksize = PAGE_SIZE;
inode->i_atime.tv_sec = le32_to_cpu(di->i_atime);
inode->i_mtime.tv_sec = le32_to_cpu(di->i_mtime);
inode->i_ctime.tv_sec = le32_to_cpu(di->i_ctime);
@@ -268,8 +267,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(bfs_inode_cachep))
- printk(KERN_INFO "bfs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(bfs_inode_cachep);
}
static struct super_operations bfs_sops = {
@@ -311,11 +309,10 @@
unsigned i, imap_len;
struct bfs_sb_info * info;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
s->s_fs_info = info;
- memset(info, 0, sizeof(*info));
sb_set_blocksize(s, BFS_BSIZE);
@@ -338,10 +335,9 @@
+ BFS_ROOT_INO - 1;
imap_len = info->si_lasti/8 + 1;
- info->si_imap = kmalloc(imap_len, GFP_KERNEL);
+ info->si_imap = kzalloc(imap_len, GFP_KERNEL);
if (!info->si_imap)
goto out;
- memset(info->si_imap, 0, imap_len);
for (i=0; i<BFS_ROOT_INO; i++)
set_bit(i, info->si_imap);
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 64802aa..dfd8cfb 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -515,7 +515,8 @@
{
unsigned int random_variable = 0;
- if (current->flags & PF_RANDOMIZE) {
+ if ((current->flags & PF_RANDOMIZE) &&
+ !(current->personality & ADDR_NO_RANDOMIZE)) {
random_variable = get_random_int() & STACK_RND_MASK;
random_variable <<= PAGE_SHIFT;
}
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 34ebbc1..66ba137 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -507,7 +507,6 @@
inode->i_mode = mode;
inode->i_uid = 0;
inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime =
current_fs_time(inode->i_sb);
@@ -517,7 +516,7 @@
static void bm_clear_inode(struct inode *inode)
{
- kfree(inode->u.generic_ip);
+ kfree(inode->i_private);
}
static void kill_node(Node *e)
@@ -545,7 +544,7 @@
static ssize_t
bm_entry_read(struct file * file, char __user * buf, size_t nbytes, loff_t *ppos)
{
- Node *e = file->f_dentry->d_inode->u.generic_ip;
+ Node *e = file->f_dentry->d_inode->i_private;
loff_t pos = *ppos;
ssize_t res;
char *page;
@@ -579,7 +578,7 @@
size_t count, loff_t *ppos)
{
struct dentry *root;
- Node *e = file->f_dentry->d_inode->u.generic_ip;
+ Node *e = file->f_dentry->d_inode->i_private;
int res = parse_command(buffer, count);
switch (res) {
@@ -646,7 +645,7 @@
}
e->dentry = dget(dentry);
- inode->u.generic_ip = e;
+ inode->i_private = e;
inode->i_fop = &bm_entry_operations;
d_instantiate(dentry, inode);
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 3483d3c..0009346 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -19,11 +19,30 @@
#include <linux/kobj_map.h>
#include <linux/cdev.h>
#include <linux/mutex.h>
+#include <linux/backing-dev.h>
#ifdef CONFIG_KMOD
#include <linux/kmod.h>
#endif
+/*
+ * capabilities for /dev/mem, /dev/kmem and similar directly mappable character
+ * devices
+ * - permits shared-mmap for read, write and/or exec
+ * - does not permit private mmap in NOMMU mode (can't do COW)
+ * - no readahead or I/O queue unplugging required
+ */
+struct backing_dev_info directly_mappable_cdev_bdi = {
+ .capabilities = (
+#ifdef CONFIG_MMU
+ /* permit private copies of the data to be taken */
+ BDI_CAP_MAP_COPY |
+#endif
+ /* permit direct mmap, for read, write or exec */
+ BDI_CAP_MAP_DIRECT |
+ BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP),
+};
+
static struct kobj_map *cdev_map;
static DEFINE_MUTEX(chrdevs_lock);
@@ -461,3 +480,4 @@
EXPORT_SYMBOL(cdev_add);
EXPORT_SYMBOL(register_chrdev);
EXPORT_SYMBOL(unregister_chrdev);
+EXPORT_SYMBOL(directly_mappable_cdev_bdi);
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index c3ef1c0..22bcf4d 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -253,7 +253,6 @@
file data or metadata */
cifs_inode->clientCanCacheRead = FALSE;
cifs_inode->clientCanCacheAll = FALSE;
- cifs_inode->vfs_inode.i_blksize = CIFS_MAX_MSGSIZE;
cifs_inode->vfs_inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */
cifs_inode->vfs_inode.i_flags = S_NOATIME | S_NOCMTIME;
INIT_LIST_HEAD(&cifs_inode->openFileList);
@@ -699,8 +698,7 @@
static void
cifs_destroy_inodecache(void)
{
- if (kmem_cache_destroy(cifs_inode_cachep))
- printk(KERN_WARNING "cifs_inode_cache: error freeing\n");
+ kmem_cache_destroy(cifs_inode_cachep);
}
static int
@@ -778,13 +776,9 @@
cifs_destroy_request_bufs(void)
{
mempool_destroy(cifs_req_poolp);
- if (kmem_cache_destroy(cifs_req_cachep))
- printk(KERN_WARNING
- "cifs_destroy_request_cache: error not all structures were freed\n");
+ kmem_cache_destroy(cifs_req_cachep);
mempool_destroy(cifs_sm_req_poolp);
- if (kmem_cache_destroy(cifs_sm_req_cachep))
- printk(KERN_WARNING
- "cifs_destroy_request_cache: cifs_small_rq free error\n");
+ kmem_cache_destroy(cifs_sm_req_cachep);
}
static int
@@ -819,13 +813,8 @@
cifs_destroy_mids(void)
{
mempool_destroy(cifs_mid_poolp);
- if (kmem_cache_destroy(cifs_mid_cachep))
- printk(KERN_WARNING
- "cifs_destroy_mids: error not all structures were freed\n");
-
- if (kmem_cache_destroy(cifs_oplock_cachep))
- printk(KERN_WARNING
- "error not all oplock structures were freed\n");
+ kmem_cache_destroy(cifs_mid_cachep);
+ kmem_cache_destroy(cifs_oplock_cachep);
}
static int cifs_oplock_thread(void * dummyarg)
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 9aeb58a..b27b345 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -216,10 +216,9 @@
if (allocation_size < end_of_file)
cFYI(1, ("May be sparse file, allocation less than file size"));
- cFYI(1, ("File Size %ld and blocks %llu and blocksize %ld",
+ cFYI(1, ("File Size %ld and blocks %llu",
(unsigned long)tmp_inode->i_size,
- (unsigned long long)tmp_inode->i_blocks,
- tmp_inode->i_blksize));
+ (unsigned long long)tmp_inode->i_blocks));
if (S_ISREG(tmp_inode->i_mode)) {
cFYI(1, ("File inode"));
tmp_inode->i_op = &cifs_file_inode_ops;
diff --git a/fs/coda/coda_linux.c b/fs/coda/coda_linux.c
index 5597080..95a5425 100644
--- a/fs/coda/coda_linux.c
+++ b/fs/coda/coda_linux.c
@@ -110,8 +110,6 @@
inode->i_nlink = attr->va_nlink;
if (attr->va_size != -1)
inode->i_size = attr->va_size;
- if (attr->va_blocksize != -1)
- inode->i_blksize = attr->va_blocksize;
if (attr->va_size != -1)
inode->i_blocks = (attr->va_size + 511) >> 9;
if (attr->va_atime.tv_sec != -1)
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index 71f2ea6..8651ea6 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -513,7 +513,7 @@
ino_t ino;
int ret, i;
- vdir = (struct venus_dirent *)kmalloc(sizeof(*vdir), GFP_KERNEL);
+ vdir = kmalloc(sizeof(*vdir), GFP_KERNEL);
if (!vdir) return -ENOMEM;
i = filp->f_pos;
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index 87f1dc8..88d1233 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -80,8 +80,7 @@
void coda_destroy_inodecache(void)
{
- if (kmem_cache_destroy(coda_inode_cachep))
- printk(KERN_INFO "coda_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(coda_inode_cachep);
}
static int coda_remount(struct super_block *sb, int *flags, char *data)
diff --git a/fs/compat.c b/fs/compat.c
index e31e9cf..ce982f6 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1855,7 +1855,7 @@
} while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
- if (tsp && !(current->personality & STICKY_TIMEOUTS)) {
+ if (ret == 0 && tsp && !(current->personality & STICKY_TIMEOUTS)) {
struct compat_timespec rts;
rts.tv_sec = timeout / HZ;
@@ -1866,7 +1866,8 @@
}
if (compat_timespec_compare(&rts, &ts) >= 0)
rts = ts;
- copy_to_user(tsp, &rts, sizeof(rts));
+ if (copy_to_user(tsp, &rts, sizeof(rts)))
+ ret = -EFAULT;
}
if (ret == -ERESTARTNOHAND) {
diff --git a/fs/configfs/file.c b/fs/configfs/file.c
index f499803..85105e5 100644
--- a/fs/configfs/file.c
+++ b/fs/configfs/file.c
@@ -274,9 +274,8 @@
/* No error? Great, allocate a buffer for the file, and store it
* it in file->private_data for easy access.
*/
- buffer = kmalloc(sizeof(struct configfs_buffer),GFP_KERNEL);
+ buffer = kzalloc(sizeof(struct configfs_buffer),GFP_KERNEL);
if (buffer) {
- memset(buffer,0,sizeof(struct configfs_buffer));
init_MUTEX(&buffer->sem);
buffer->needs_read_fill = 1;
buffer->ops = ops;
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index e14488c..fb18917 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -76,11 +76,10 @@
if (!sd_iattr) {
/* setting attributes for the first time, allocate now */
- sd_iattr = kmalloc(sizeof(struct iattr), GFP_KERNEL);
+ sd_iattr = kzalloc(sizeof(struct iattr), GFP_KERNEL);
if (!sd_iattr)
return -ENOMEM;
/* assign default attributes */
- memset(sd_iattr, 0, sizeof(struct iattr));
sd_iattr->ia_mode = sd->s_mode;
sd_iattr->ia_uid = 0;
sd_iattr->ia_gid = 0;
@@ -136,7 +135,6 @@
{
struct inode * inode = new_inode(configfs_sb);
if (inode) {
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_mapping->a_ops = &configfs_aops;
inode->i_mapping->backing_dev_info = &configfs_backing_dev_info;
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index 223c043..ad96b69 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -73,7 +73,6 @@
inode->i_uid = cramfs_inode->uid;
inode->i_size = cramfs_inode->size;
inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_gid = cramfs_inode->gid;
/* Struct copy intentional */
inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
@@ -242,11 +241,10 @@
sb->s_flags |= MS_RDONLY;
- sbi = kmalloc(sizeof(struct cramfs_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct cramfs_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sb->s_fs_info = sbi;
- memset(sbi, 0, sizeof(struct cramfs_sb_info));
/* Invalidate the read buffers on mount: think disk change.. */
mutex_lock(&read_mutex);
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 39640fd..bf3901a 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -32,8 +32,8 @@
static int default_open(struct inode *inode, struct file *file)
{
- if (inode->u.generic_ip)
- file->private_data = inode->u.generic_ip;
+ if (inode->i_private)
+ file->private_data = inode->i_private;
return 0;
}
@@ -55,12 +55,11 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_u8, debugfs_u8_get, debugfs_u8_set, "%llu\n");
/**
- * debugfs_create_u8 - create a file in the debugfs filesystem that is used to read and write an unsigned 8 bit value.
- *
+ * debugfs_create_u8 - create a debugfs file that is used to read and write an unsigned 8-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
- * directory dentry if set. If this paramater is NULL, then the
+ * directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
@@ -72,11 +71,11 @@
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, NULL will be returned.
+ * you are responsible here.) If an error occurs, %NULL will be returned.
*
- * If debugfs is not enabled in the kernel, the value -ENODEV will be
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
- * NULL or !NULL instead as to eliminate the need for #ifdef in the calling
+ * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_u8(const char *name, mode_t mode,
@@ -97,12 +96,11 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_u16, debugfs_u16_get, debugfs_u16_set, "%llu\n");
/**
- * debugfs_create_u16 - create a file in the debugfs filesystem that is used to read and write an unsigned 16 bit value.
- *
+ * debugfs_create_u16 - create a debugfs file that is used to read and write an unsigned 16-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
- * directory dentry if set. If this paramater is NULL, then the
+ * directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
@@ -114,11 +112,11 @@
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, NULL will be returned.
+ * you are responsible here.) If an error occurs, %NULL will be returned.
*
- * If debugfs is not enabled in the kernel, the value -ENODEV will be
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
- * NULL or !NULL instead as to eliminate the need for #ifdef in the calling
+ * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_u16(const char *name, mode_t mode,
@@ -139,12 +137,11 @@
DEFINE_SIMPLE_ATTRIBUTE(fops_u32, debugfs_u32_get, debugfs_u32_set, "%llu\n");
/**
- * debugfs_create_u32 - create a file in the debugfs filesystem that is used to read and write an unsigned 32 bit value.
- *
+ * debugfs_create_u32 - create a debugfs file that is used to read and write an unsigned 32-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
- * directory dentry if set. If this paramater is NULL, then the
+ * directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
@@ -156,11 +153,11 @@
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, NULL will be returned.
+ * you are responsible here.) If an error occurs, %NULL will be returned.
*
- * If debugfs is not enabled in the kernel, the value -ENODEV will be
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
- * NULL or !NULL instead as to eliminate the need for #ifdef in the calling
+ * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_u32(const char *name, mode_t mode,
@@ -219,12 +216,11 @@
};
/**
- * debugfs_create_bool - create a file in the debugfs filesystem that is used to read and write a boolean value.
- *
+ * debugfs_create_bool - create a debugfs file that is used to read and write a boolean value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
- * directory dentry if set. If this paramater is NULL, then the
+ * directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
@@ -236,11 +232,11 @@
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, NULL will be returned.
+ * you are responsible here.) If an error occurs, %NULL will be returned.
*
- * If debugfs is not enabled in the kernel, the value -ENODEV will be
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
- * NULL or !NULL instead as to eliminate the need for #ifdef in the calling
+ * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_bool(const char *name, mode_t mode,
@@ -264,13 +260,11 @@
};
/**
- * debugfs_create_blob - create a file in the debugfs filesystem that is
- * used to read and write a binary blob.
- *
+ * debugfs_create_blob - create a debugfs file that is used to read and write a binary blob
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
- * directory dentry if set. If this paramater is NULL, then the
+ * directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @blob: a pointer to a struct debugfs_blob_wrapper which contains a pointer
* to the blob data and the size of the data.
@@ -282,11 +276,11 @@
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, NULL will be returned.
+ * you are responsible here.) If an error occurs, %NULL will be returned.
*
- * If debugfs is not enabled in the kernel, the value -ENODEV will be
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
- * NULL or !NULL instead as to eliminate the need for #ifdef in the calling
+ * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_blob(const char *name, mode_t mode,
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index e8ae304..269e649 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -40,7 +40,6 @@
inode->i_mode = mode;
inode->i_uid = 0;
inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
switch (mode & S_IFMT) {
@@ -162,14 +161,13 @@
/**
* debugfs_create_file - create a file in the debugfs filesystem
- *
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this paramater is NULL, then the
* file will be created in the root of the debugfs filesystem.
* @data: a pointer to something that the caller will want to get to later
- * on. The inode.u.generic_ip pointer will point to this value on
+ * on. The inode.i_private pointer will point to this value on
* the open() call.
* @fops: a pointer to a struct file_operations that should be used for
* this file.
@@ -182,11 +180,11 @@
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, NULL will be returned.
+ * you are responsible here.) If an error occurs, %NULL will be returned.
*
- * If debugfs is not enabled in the kernel, the value -ENODEV will be
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
- * NULL or !NULL instead as to eliminate the need for #ifdef in the calling
+ * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_file(const char *name, mode_t mode,
@@ -210,7 +208,7 @@
if (dentry->d_inode) {
if (data)
- dentry->d_inode->u.generic_ip = data;
+ dentry->d_inode->i_private = data;
if (fops)
dentry->d_inode->i_fop = fops;
}
@@ -221,7 +219,6 @@
/**
* debugfs_create_dir - create a directory in the debugfs filesystem
- *
* @name: a pointer to a string containing the name of the directory to
* create.
* @parent: a pointer to the parent dentry for this file. This should be a
@@ -233,11 +230,11 @@
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
- * you are responsible here.) If an error occurs, NULL will be returned.
+ * you are responsible here.) If an error occurs, %NULL will be returned.
*
- * If debugfs is not enabled in the kernel, the value -ENODEV will be
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
- * NULL or !NULL instead as to eliminate the need for #ifdef in the calling
+ * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_dir(const char *name, struct dentry *parent)
@@ -250,7 +247,6 @@
/**
* debugfs_remove - removes a file or directory from the debugfs filesystem
- *
* @dentry: a pointer to a the dentry of the file or directory to be
* removed.
*
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index f7aef5b..5f7b5a6 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -113,7 +113,6 @@
inode->i_ino = 1;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
inode->i_blocks = 0;
- inode->i_blksize = 1024;
inode->i_uid = inode->i_gid = 0;
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
inode->i_op = &simple_dir_inode_operations;
@@ -172,12 +171,11 @@
return -ENOMEM;
inode->i_ino = number+2;
- inode->i_blksize = 1024;
inode->i_uid = config.setuid ? config.uid : current->fsuid;
inode->i_gid = config.setgid ? config.gid : current->fsgid;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|config.mode, device);
- inode->u.generic_ip = tty;
+ inode->i_private = tty;
dentry = get_node(number);
if (!IS_ERR(dentry) && !dentry->d_inode)
@@ -196,7 +194,7 @@
tty = NULL;
if (!IS_ERR(dentry)) {
if (dentry->d_inode)
- tty = dentry->d_inode->u.generic_ip;
+ tty = dentry->d_inode->i_private;
dput(dentry);
}
diff --git a/fs/efs/super.c b/fs/efs/super.c
index 8ac2462..b3f5065 100644
--- a/fs/efs/super.c
+++ b/fs/efs/super.c
@@ -90,8 +90,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(efs_inode_cachep))
- printk(KERN_INFO "efs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(efs_inode_cachep);
}
static void efs_put_super(struct super_block *s)
@@ -248,11 +247,10 @@
struct buffer_head *bh;
struct inode *root;
- sb = kmalloc(sizeof(struct efs_sb_info), GFP_KERNEL);
+ sb = kzalloc(sizeof(struct efs_sb_info), GFP_KERNEL);
if (!sb)
return -ENOMEM;
s->s_fs_info = sb;
- memset(sb, 0, sizeof(struct efs_sb_info));
s->s_magic = EFS_SUPER_MAGIC;
if (!sb_set_blocksize(s, EFS_BLOCKSIZE)) {
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 3a35674..8d54433 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1590,7 +1590,6 @@
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->i_blksize = PAGE_SIZE;
return inode;
eexit_1:
diff --git a/fs/exec.c b/fs/exec.c
index 54135df..97df6e0 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -595,7 +595,7 @@
if (!newsighand)
return -ENOMEM;
- if (thread_group_empty(current))
+ if (thread_group_empty(tsk))
goto no_thread_group;
/*
@@ -620,17 +620,17 @@
* Reparenting needs write_lock on tasklist_lock,
* so it is safe to do it under read_lock.
*/
- if (unlikely(current->group_leader == child_reaper))
- child_reaper = current;
+ if (unlikely(tsk->group_leader == child_reaper))
+ child_reaper = tsk;
- zap_other_threads(current);
+ zap_other_threads(tsk);
read_unlock(&tasklist_lock);
/*
* Account for the thread group leader hanging around:
*/
count = 1;
- if (!thread_group_leader(current)) {
+ if (!thread_group_leader(tsk)) {
count = 2;
/*
* The SIGALRM timer survives the exec, but needs to point
@@ -639,14 +639,14 @@
* synchronize with any firing (by calling del_timer_sync)
* before we can safely let the old group leader die.
*/
- sig->tsk = current;
+ sig->tsk = tsk;
spin_unlock_irq(lock);
if (hrtimer_cancel(&sig->real_timer))
hrtimer_restart(&sig->real_timer);
spin_lock_irq(lock);
}
while (atomic_read(&sig->count) > count) {
- sig->group_exit_task = current;
+ sig->group_exit_task = tsk;
sig->notify_count = count;
__set_current_state(TASK_UNINTERRUPTIBLE);
spin_unlock_irq(lock);
@@ -662,13 +662,13 @@
* do is to wait for the thread group leader to become inactive,
* and to assume its PID:
*/
- if (!thread_group_leader(current)) {
+ if (!thread_group_leader(tsk)) {
/*
* Wait for the thread group leader to be a zombie.
* It should already be zombie at this point, most
* of the time.
*/
- leader = current->group_leader;
+ leader = tsk->group_leader;
while (leader->exit_state != EXIT_ZOMBIE)
yield();
@@ -682,12 +682,12 @@
* When we take on its identity by switching to its PID, we
* also take its birthdate (always earlier than our own).
*/
- current->start_time = leader->start_time;
+ tsk->start_time = leader->start_time;
write_lock_irq(&tasklist_lock);
- BUG_ON(leader->tgid != current->tgid);
- BUG_ON(current->pid == current->tgid);
+ BUG_ON(leader->tgid != tsk->tgid);
+ BUG_ON(tsk->pid == tsk->tgid);
/*
* An exec() starts a new thread group with the
* TGID of the previous thread group. Rehash the
@@ -696,24 +696,21 @@
*/
/* Become a process group leader with the old leader's pid.
- * Note: The old leader also uses thispid until release_task
+ * The old leader becomes a thread of the this thread group.
+ * Note: The old leader also uses this pid until release_task
* is called. Odd but simple and correct.
*/
- detach_pid(current, PIDTYPE_PID);
- current->pid = leader->pid;
- attach_pid(current, PIDTYPE_PID, current->pid);
- attach_pid(current, PIDTYPE_PGID, current->signal->pgrp);
- attach_pid(current, PIDTYPE_SID, current->signal->session);
- list_replace_rcu(&leader->tasks, ¤t->tasks);
+ detach_pid(tsk, PIDTYPE_PID);
+ tsk->pid = leader->pid;
+ attach_pid(tsk, PIDTYPE_PID, tsk->pid);
+ transfer_pid(leader, tsk, PIDTYPE_PGID);
+ transfer_pid(leader, tsk, PIDTYPE_SID);
+ list_replace_rcu(&leader->tasks, &tsk->tasks);
- current->group_leader = current;
- leader->group_leader = current;
+ tsk->group_leader = tsk;
+ leader->group_leader = tsk;
- /* Reduce leader to a thread */
- detach_pid(leader, PIDTYPE_PGID);
- detach_pid(leader, PIDTYPE_SID);
-
- current->exit_signal = SIGCHLD;
+ tsk->exit_signal = SIGCHLD;
BUG_ON(leader->exit_state != EXIT_ZOMBIE);
leader->exit_state = EXIT_DEAD;
@@ -753,7 +750,7 @@
spin_lock(&oldsighand->siglock);
spin_lock_nested(&newsighand->siglock, SINGLE_DEPTH_NESTING);
- rcu_assign_pointer(current->sighand, newsighand);
+ rcu_assign_pointer(tsk->sighand, newsighand);
recalc_sigpending();
spin_unlock(&newsighand->siglock);
@@ -764,7 +761,7 @@
kmem_cache_free(sighand_cachep, oldsighand);
}
- BUG_ON(!thread_group_leader(current));
+ BUG_ON(!thread_group_leader(tsk));
return 0;
}
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index da52b4a..7c420b8 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -89,8 +89,8 @@
size_t n;
*size = ext2_acl_size(acl->a_count);
- ext_acl = (ext2_acl_header *)kmalloc(sizeof(ext2_acl_header) +
- acl->a_count * sizeof(ext2_acl_entry), GFP_KERNEL);
+ ext_acl = kmalloc(sizeof(ext2_acl_header) + acl->a_count *
+ sizeof(ext2_acl_entry), GFP_KERNEL);
if (!ext_acl)
return ERR_PTR(-ENOMEM);
ext_acl->a_version = cpu_to_le32(EXT2_ACL_VERSION);
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index 695f69c..2cb545b 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -574,7 +574,6 @@
inode->i_mode = mode;
inode->i_ino = ino;
- inode->i_blksize = PAGE_SIZE; /* This is the optimal IO size (for stat), not the fs block size */
inode->i_blocks = 0;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
memset(ei->i_data, 0, sizeof(ei->i_data));
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index fb4d322..dd4e14c 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1094,7 +1094,6 @@
brelse (bh);
goto bad_inode;
}
- inode->i_blksize = PAGE_SIZE; /* This is the optimal IO size (for stat), not the fs block size */
inode->i_blocks = le32_to_cpu(raw_inode->i_blocks);
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
ei->i_faddr = le32_to_cpu(raw_inode->i_faddr);
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 4286ff6..513cd42 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -184,8 +184,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(ext2_inode_cachep))
- printk(KERN_INFO "ext2_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(ext2_inode_cachep);
}
static void ext2_clear_inode(struct inode *inode)
@@ -544,17 +543,24 @@
int i;
int desc_block = 0;
struct ext2_sb_info *sbi = EXT2_SB(sb);
- unsigned long block = le32_to_cpu(sbi->s_es->s_first_data_block);
+ unsigned long first_block = le32_to_cpu(sbi->s_es->s_first_data_block);
+ unsigned long last_block;
struct ext2_group_desc * gdp = NULL;
ext2_debug ("Checking group descriptors");
for (i = 0; i < sbi->s_groups_count; i++)
{
+ if (i == sbi->s_groups_count - 1)
+ last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1;
+ else
+ last_block = first_block +
+ (EXT2_BLOCKS_PER_GROUP(sb) - 1);
+
if ((i % EXT2_DESC_PER_BLOCK(sb)) == 0)
gdp = (struct ext2_group_desc *) sbi->s_group_desc[desc_block++]->b_data;
- if (le32_to_cpu(gdp->bg_block_bitmap) < block ||
- le32_to_cpu(gdp->bg_block_bitmap) >= block + EXT2_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_block_bitmap) < first_block ||
+ le32_to_cpu(gdp->bg_block_bitmap) > last_block)
{
ext2_error (sb, "ext2_check_descriptors",
"Block bitmap for group %d"
@@ -562,8 +568,8 @@
i, (unsigned long) le32_to_cpu(gdp->bg_block_bitmap));
return 0;
}
- if (le32_to_cpu(gdp->bg_inode_bitmap) < block ||
- le32_to_cpu(gdp->bg_inode_bitmap) >= block + EXT2_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block ||
+ le32_to_cpu(gdp->bg_inode_bitmap) > last_block)
{
ext2_error (sb, "ext2_check_descriptors",
"Inode bitmap for group %d"
@@ -571,9 +577,9 @@
i, (unsigned long) le32_to_cpu(gdp->bg_inode_bitmap));
return 0;
}
- if (le32_to_cpu(gdp->bg_inode_table) < block ||
- le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >=
- block + EXT2_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_inode_table) < first_block ||
+ le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >
+ last_block)
{
ext2_error (sb, "ext2_check_descriptors",
"Inode table for group %d"
@@ -581,7 +587,7 @@
i, (unsigned long) le32_to_cpu(gdp->bg_inode_table));
return 0;
}
- block += EXT2_BLOCKS_PER_GROUP(sb);
+ first_block += EXT2_BLOCKS_PER_GROUP(sb);
gdp++;
}
return 1;
@@ -648,11 +654,10 @@
int i, j;
__le32 features;
- sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
+ sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sb->s_fs_info = sbi;
- memset(sbi, 0, sizeof(*sbi));
/*
* See what the current blocksize for the device is, and
@@ -861,10 +866,9 @@
if (EXT2_BLOCKS_PER_GROUP(sb) == 0)
goto cantfind_ext2;
- sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
- le32_to_cpu(es->s_first_data_block) +
- EXT2_BLOCKS_PER_GROUP(sb) - 1) /
- EXT2_BLOCKS_PER_GROUP(sb);
+ sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
+ le32_to_cpu(es->s_first_data_block) - 1)
+ / EXT2_BLOCKS_PER_GROUP(sb)) + 1;
db_count = (sbi->s_groups_count + EXT2_DESC_PER_BLOCK(sb) - 1) /
EXT2_DESC_PER_BLOCK(sb);
sbi->s_group_desc = kmalloc (db_count * sizeof (struct buffer_head *), GFP_KERNEL);
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 86ae8e9..af52a7f 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -521,11 +521,10 @@
}
} else {
/* Allocate a buffer where we construct the new block. */
- header = kmalloc(sb->s_blocksize, GFP_KERNEL);
+ header = kzalloc(sb->s_blocksize, GFP_KERNEL);
error = -ENOMEM;
if (header == NULL)
goto cleanup;
- memset(header, 0, sb->s_blocksize);
end = (char *)header + sb->s_blocksize;
header->h_magic = cpu_to_le32(EXT2_XATTR_MAGIC);
header->h_blocks = header->h_refcount = cpu_to_le32(1);
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index 0d21d55..1e5038d 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -90,8 +90,8 @@
size_t n;
*size = ext3_acl_size(acl->a_count);
- ext_acl = (ext3_acl_header *)kmalloc(sizeof(ext3_acl_header) +
- acl->a_count * sizeof(ext3_acl_entry), GFP_KERNEL);
+ ext_acl = kmalloc(sizeof(ext3_acl_header) + acl->a_count *
+ sizeof(ext3_acl_entry), GFP_KERNEL);
if (!ext_acl)
return ERR_PTR(-ENOMEM);
ext_acl->a_version = cpu_to_le32(EXT3_ACL_VERSION);
@@ -258,7 +258,7 @@
default:
return -EINVAL;
}
- if (acl) {
+ if (acl) {
value = ext3_acl_to_disk(acl, &size);
if (IS_ERR(value))
return (int)PTR_ERR(value);
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 063d994..b41a7d7 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -38,6 +38,13 @@
#define in_range(b, first, len) ((b) >= (first) && (b) <= (first) + (len) - 1)
+/**
+ * ext3_get_group_desc() -- load group descriptor from disk
+ * @sb: super block
+ * @block_group: given block group
+ * @bh: pointer to the buffer head to store the block
+ * group descriptor
+ */
struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb,
unsigned int block_group,
struct buffer_head ** bh)
@@ -73,8 +80,12 @@
return desc + offset;
}
-/*
- * Read the bitmap for a given block_group, reading into the specified
+/**
+ * read_block_bitmap()
+ * @sb: super block
+ * @block_group: given block group
+ *
+ * Read the bitmap for a given block_group, reading into the specified
* slot in the superblock's bitmap cache.
*
* Return buffer_head on success or NULL in case of failure.
@@ -103,15 +114,22 @@
* Operations include:
* dump, find, add, remove, is_empty, find_next_reservable_window, etc.
*
- * We use sorted double linked list for the per-filesystem reservation
- * window list. (like in vm_region).
+ * We use a red-black tree to represent per-filesystem reservation
+ * windows.
*
- * Initially, we keep those small operations in the abstract functions,
- * so later if we need a better searching tree than double linked-list,
- * we could easily switch to that without changing too much
- * code.
*/
-#if 0
+
+/**
+ * __rsv_window_dump() -- Dump the filesystem block allocation reservation map
+ * @rb_root: root of per-filesystem reservation rb tree
+ * @verbose: verbose mode
+ * @fn: function which wishes to dump the reservation map
+ *
+ * If verbose is turned on, it will print the whole block reservation
+ * windows(start, end). Otherwise, it will only print out the "bad" windows,
+ * those windows that overlap with their immediate neighbors.
+ */
+#if 1
static void __rsv_window_dump(struct rb_root *root, int verbose,
const char *fn)
{
@@ -129,7 +147,7 @@
rsv = list_entry(n, struct ext3_reserve_window_node, rsv_node);
if (verbose)
printk("reservation window 0x%p "
- "start: %d, end: %d\n",
+ "start: %lu, end: %lu\n",
rsv, rsv->rsv_start, rsv->rsv_end);
if (rsv->rsv_start && rsv->rsv_start >= rsv->rsv_end) {
printk("Bad reservation %p (start >= end)\n",
@@ -161,6 +179,22 @@
#define rsv_window_dump(root, verbose) do {} while (0)
#endif
+/**
+ * goal_in_my_reservation()
+ * @rsv: inode's reservation window
+ * @grp_goal: given goal block relative to the allocation block group
+ * @group: the current allocation block group
+ * @sb: filesystem super block
+ *
+ * Test if the given goal block (group relative) is within the file's
+ * own block reservation window range.
+ *
+ * If the reservation window is outside the goal allocation group, return 0;
+ * grp_goal (given goal block) could be -1, which means no specific
+ * goal block. In this case, always return 1.
+ * If the goal block is within the reservation window, return 1;
+ * otherwise, return 0;
+ */
static int
goal_in_my_reservation(struct ext3_reserve_window *rsv, ext3_grpblk_t grp_goal,
unsigned int group, struct super_block * sb)
@@ -168,7 +202,7 @@
ext3_fsblk_t group_first_block, group_last_block;
group_first_block = ext3_group_first_block_no(sb, group);
- group_last_block = group_first_block + EXT3_BLOCKS_PER_GROUP(sb) - 1;
+ group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1);
if ((rsv->_rsv_start > group_last_block) ||
(rsv->_rsv_end < group_first_block))
@@ -179,7 +213,11 @@
return 1;
}
-/*
+/**
+ * search_reserve_window()
+ * @rb_root: root of reservation tree
+ * @goal: target allocation block
+ *
* Find the reserved window which includes the goal, or the previous one
* if the goal is not in any window.
* Returns NULL if there are no windows or if all windows start after the goal.
@@ -216,6 +254,13 @@
return rsv;
}
+/**
+ * ext3_rsv_window_add() -- Insert a window to the block reservation rb tree.
+ * @sb: super block
+ * @rsv: reservation window to add
+ *
+ * Must be called with rsv_lock hold.
+ */
void ext3_rsv_window_add(struct super_block *sb,
struct ext3_reserve_window_node *rsv)
{
@@ -236,14 +281,25 @@
p = &(*p)->rb_left;
else if (start > this->rsv_end)
p = &(*p)->rb_right;
- else
+ else {
+ rsv_window_dump(root, 1);
BUG();
+ }
}
rb_link_node(node, parent, p);
rb_insert_color(node, root);
}
+/**
+ * ext3_rsv_window_remove() -- unlink a window from the reservation rb tree
+ * @sb: super block
+ * @rsv: reservation window to remove
+ *
+ * Mark the block reservation window as not allocated, and unlink it
+ * from the filesystem reservation window rb tree. Must be called with
+ * rsv_lock hold.
+ */
static void rsv_window_remove(struct super_block *sb,
struct ext3_reserve_window_node *rsv)
{
@@ -253,11 +309,39 @@
rb_erase(&rsv->rsv_node, &EXT3_SB(sb)->s_rsv_window_root);
}
+/*
+ * rsv_is_empty() -- Check if the reservation window is allocated.
+ * @rsv: given reservation window to check
+ *
+ * returns 1 if the end block is EXT3_RESERVE_WINDOW_NOT_ALLOCATED.
+ */
static inline int rsv_is_empty(struct ext3_reserve_window *rsv)
{
/* a valid reservation end block could not be 0 */
- return (rsv->_rsv_end == EXT3_RESERVE_WINDOW_NOT_ALLOCATED);
+ return rsv->_rsv_end == EXT3_RESERVE_WINDOW_NOT_ALLOCATED;
}
+
+/**
+ * ext3_init_block_alloc_info()
+ * @inode: file inode structure
+ *
+ * Allocate and initialize the reservation window structure, and
+ * link the window to the ext3 inode structure at last
+ *
+ * The reservation window structure is only dynamically allocated
+ * and linked to ext3 inode the first time the open file
+ * needs a new block. So, before every ext3_new_block(s) call, for
+ * regular files, we should check whether the reservation window
+ * structure exists or not. In the latter case, this function is called.
+ * Fail to do so will result in block reservation being turned off for that
+ * open file.
+ *
+ * This function is called from ext3_get_blocks_handle(), also called
+ * when setting the reservation window size through ioctl before the file
+ * is open for write (needs block allocation).
+ *
+ * Needs truncate_mutex protection prior to call this function.
+ */
void ext3_init_block_alloc_info(struct inode *inode)
{
struct ext3_inode_info *ei = EXT3_I(inode);
@@ -271,7 +355,7 @@
rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED;
rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED;
- /*
+ /*
* if filesystem is mounted with NORESERVATION, the goal
* reservation window size is set to zero to indicate
* block reservation is off
@@ -287,6 +371,19 @@
ei->i_block_alloc_info = block_i;
}
+/**
+ * ext3_discard_reservation()
+ * @inode: inode
+ *
+ * Discard(free) block reservation window on last file close, or truncate
+ * or at last iput().
+ *
+ * It is being called in three cases:
+ * ext3_release_file(): last writer close the file
+ * ext3_clear_inode(): last iput(), when nobody link to this file.
+ * ext3_truncate(): when the block indirect map is about to change.
+ *
+ */
void ext3_discard_reservation(struct inode *inode)
{
struct ext3_inode_info *ei = EXT3_I(inode);
@@ -306,7 +403,14 @@
}
}
-/* Free given blocks, update quota and i_blocks field */
+/**
+ * ext3_free_blocks_sb() -- Free given blocks and update quota
+ * @handle: handle to this transaction
+ * @sb: super block
+ * @block: start physcial block to free
+ * @count: number of blocks to free
+ * @pdquot_freed_blocks: pointer to quota
+ */
void ext3_free_blocks_sb(handle_t *handle, struct super_block *sb,
ext3_fsblk_t block, unsigned long count,
unsigned long *pdquot_freed_blocks)
@@ -419,8 +523,8 @@
}
/* @@@ This prevents newly-allocated data from being
* freed and then reallocated within the same
- * transaction.
- *
+ * transaction.
+ *
* Ideally we would want to allow that to happen, but to
* do so requires making journal_forget() capable of
* revoking the queued write of a data block, which
@@ -433,7 +537,7 @@
* safe not to set the allocation bit in the committed
* bitmap, because we know that there is no outstanding
* activity on the buffer any more and so it is safe to
- * reallocate it.
+ * reallocate it.
*/
BUFFER_TRACE(bitmap_bh, "set in b_committed_data");
J_ASSERT_BH(bitmap_bh,
@@ -490,7 +594,13 @@
return;
}
-/* Free given blocks, update quota and i_blocks field */
+/**
+ * ext3_free_blocks() -- Free given blocks and update quota
+ * @handle: handle for this transaction
+ * @inode: inode
+ * @block: start physical block to free
+ * @count: number of blocks to count
+ */
void ext3_free_blocks(handle_t *handle, struct inode *inode,
ext3_fsblk_t block, unsigned long count)
{
@@ -508,7 +618,11 @@
return;
}
-/*
+/**
+ * ext3_test_allocatable()
+ * @nr: given allocation block group
+ * @bh: bufferhead contains the bitmap of the given block group
+ *
* For ext3 allocations, we must not reuse any blocks which are
* allocated in the bitmap buffer's "last committed data" copy. This
* prevents deletes from freeing up the page for reuse until we have
@@ -518,7 +632,7 @@
* data would allow the old block to be overwritten before the
* transaction committed (because we force data to disk before commit).
* This would lead to corruption if we crashed between overwriting the
- * data and committing the delete.
+ * data and committing the delete.
*
* @@@ We may want to make this allocation behaviour conditional on
* data-writes at some point, and disable it for metadata allocations or
@@ -541,6 +655,16 @@
return ret;
}
+/**
+ * bitmap_search_next_usable_block()
+ * @start: the starting block (group relative) of the search
+ * @bh: bufferhead contains the block group bitmap
+ * @maxblocks: the ending block (group relative) of the reservation
+ *
+ * The bitmap search --- search forward alternately through the actual
+ * bitmap on disk and the last-committed copy in journal, until we find a
+ * bit free in both bitmaps.
+ */
static ext3_grpblk_t
bitmap_search_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh,
ext3_grpblk_t maxblocks)
@@ -548,11 +672,6 @@
ext3_grpblk_t next;
struct journal_head *jh = bh2jh(bh);
- /*
- * The bitmap search --- search forward alternately through the actual
- * bitmap and the last-committed copy until we find a bit free in
- * both
- */
while (start < maxblocks) {
next = ext3_find_next_zero_bit(bh->b_data, maxblocks, start);
if (next >= maxblocks)
@@ -562,14 +681,20 @@
jbd_lock_bh_state(bh);
if (jh->b_committed_data)
start = ext3_find_next_zero_bit(jh->b_committed_data,
- maxblocks, next);
+ maxblocks, next);
jbd_unlock_bh_state(bh);
}
return -1;
}
-/*
- * Find an allocatable block in a bitmap. We honour both the bitmap and
+/**
+ * find_next_usable_block()
+ * @start: the starting block (group relative) to find next
+ * allocatable block in bitmap.
+ * @bh: bufferhead contains the block group bitmap
+ * @maxblocks: the ending block (group relative) for the search
+ *
+ * Find an allocatable block in a bitmap. We honor both the bitmap and
* its last-committed copy (if that exists), and perform the "most
* appropriate allocation" algorithm of looking for a free block near
* the initial goal; then for a free byte somewhere in the bitmap; then
@@ -584,7 +709,7 @@
if (start > 0) {
/*
- * The goal was occupied; search forward for a free
+ * The goal was occupied; search forward for a free
* block within the next XX blocks.
*
* end_goal is more or less random, but it has to be
@@ -620,7 +745,11 @@
return here;
}
-/*
+/**
+ * claim_block()
+ * @block: the free block (group relative) to allocate
+ * @bh: the bufferhead containts the block group bitmap
+ *
* We think we can allocate this block in this bitmap. Try to set the bit.
* If that succeeds then check that nobody has allocated and then freed the
* block since we saw that is was not marked in b_committed_data. If it _was_
@@ -646,7 +775,26 @@
return ret;
}
-/*
+/**
+ * ext3_try_to_allocate()
+ * @sb: superblock
+ * @handle: handle to this transaction
+ * @group: given allocation block group
+ * @bitmap_bh: bufferhead holds the block bitmap
+ * @grp_goal: given target block within the group
+ * @count: target number of blocks to allocate
+ * @my_rsv: reservation window
+ *
+ * Attempt to allocate blocks within a give range. Set the range of allocation
+ * first, then find the first free bit(s) from the bitmap (within the range),
+ * and at last, allocate the blocks by claiming the found free bit as allocated.
+ *
+ * To set the range of this allocation:
+ * if there is a reservation window, only try to allocate block(s) from the
+ * file's own reservation window;
+ * Otherwise, the allocation range starts from the give goal block, ends at
+ * the block group's last block.
+ *
* If we failed to allocate the desired block then we may end up crossing to a
* new bitmap. In that case we must release write access to the old one via
* ext3_journal_release_buffer(), else we'll run out of credits.
@@ -703,7 +851,8 @@
}
start = grp_goal;
- if (!claim_block(sb_bgl_lock(EXT3_SB(sb), group), grp_goal, bitmap_bh)) {
+ if (!claim_block(sb_bgl_lock(EXT3_SB(sb), group),
+ grp_goal, bitmap_bh)) {
/*
* The block was allocated by another thread, or it was
* allocated and then freed by another thread
@@ -718,7 +867,8 @@
grp_goal++;
while (num < *count && grp_goal < end
&& ext3_test_allocatable(grp_goal, bitmap_bh)
- && claim_block(sb_bgl_lock(EXT3_SB(sb), group), grp_goal, bitmap_bh)) {
+ && claim_block(sb_bgl_lock(EXT3_SB(sb), group),
+ grp_goal, bitmap_bh)) {
num++;
grp_goal++;
}
@@ -730,12 +880,12 @@
}
/**
- * find_next_reservable_window():
+ * find_next_reservable_window():
* find a reservable space within the given range.
* It does not allocate the reservation window for now:
* alloc_new_reservation() will do the work later.
*
- * @search_head: the head of the searching list;
+ * @search_head: the head of the searching list;
* This is not necessarily the list head of the whole filesystem
*
* We have both head and start_block to assist the search
@@ -743,12 +893,12 @@
* but we will shift to the place where start_block is,
* then start from there, when looking for a reservable space.
*
- * @size: the target new reservation window size
+ * @size: the target new reservation window size
*
- * @group_first_block: the first block we consider to start
+ * @group_first_block: the first block we consider to start
* the real search from
*
- * @last_block:
+ * @last_block:
* the maximum block number that our goal reservable space
* could start from. This is normally the last block in this
* group. The search will end when we found the start of next
@@ -756,10 +906,10 @@
* This could handle the cross boundary reservation window
* request.
*
- * basically we search from the given range, rather than the whole
- * reservation double linked list, (start_block, last_block)
- * to find a free region that is of my size and has not
- * been reserved.
+ * basically we search from the given range, rather than the whole
+ * reservation double linked list, (start_block, last_block)
+ * to find a free region that is of my size and has not
+ * been reserved.
*
*/
static int find_next_reservable_window(
@@ -812,7 +962,7 @@
/*
* Found a reserveable space big enough. We could
* have a reservation across the group boundary here
- */
+ */
break;
}
}
@@ -848,7 +998,7 @@
}
/**
- * alloc_new_reservation()--allocate a new reservation window
+ * alloc_new_reservation()--allocate a new reservation window
*
* To make a new reservation, we search part of the filesystem
* reservation list (the list that inside the group). We try to
@@ -897,7 +1047,7 @@
spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock;
group_first_block = ext3_group_first_block_no(sb, group);
- group_end_block = group_first_block + EXT3_BLOCKS_PER_GROUP(sb) - 1;
+ group_end_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1);
if (grp_goal < 0)
start_block = group_first_block;
@@ -929,9 +1079,10 @@
if ((my_rsv->rsv_alloc_hit >
(my_rsv->rsv_end - my_rsv->rsv_start + 1) / 2)) {
/*
- * if we previously allocation hit ration is greater than half
- * we double the size of reservation window next time
- * otherwise keep the same
+ * if the previously allocation hit ratio is
+ * greater than 1/2, then we double the size of
+ * the reservation window the next time,
+ * otherwise we keep the same size window
*/
size = size * 2;
if (size > EXT3_MAX_RESERVE_BLOCKS)
@@ -1010,6 +1161,23 @@
goto retry;
}
+/**
+ * try_to_extend_reservation()
+ * @my_rsv: given reservation window
+ * @sb: super block
+ * @size: the delta to extend
+ *
+ * Attempt to expand the reservation window large enough to have
+ * required number of free blocks
+ *
+ * Since ext3_try_to_allocate() will always allocate blocks within
+ * the reservation window range, if the window size is too small,
+ * multiple blocks allocation has to stop at the end of the reservation
+ * window. To make this more efficient, given the total number of
+ * blocks needed and the current size of the window, we try to
+ * expand the reservation window size if necessary on a best-effort
+ * basis before ext3_new_blocks() tries to allocate blocks,
+ */
static void try_to_extend_reservation(struct ext3_reserve_window_node *my_rsv,
struct super_block *sb, int size)
{
@@ -1035,7 +1203,17 @@
spin_unlock(rsv_lock);
}
-/*
+/**
+ * ext3_try_to_allocate_with_rsv()
+ * @sb: superblock
+ * @handle: handle to this transaction
+ * @group: given allocation block group
+ * @bitmap_bh: bufferhead holds the block bitmap
+ * @grp_goal: given target block within the group
+ * @count: target number of blocks to allocate
+ * @my_rsv: reservation window
+ * @errp: pointer to store the error code
+ *
* This is the main function used to allocate a new block and its reservation
* window.
*
@@ -1051,9 +1229,7 @@
* reservation), and there are lots of free blocks, but they are all
* being reserved.
*
- * We use a sorted double linked list for the per-filesystem reservation list.
- * The insert, remove and find a free space(non-reserved) operations for the
- * sorted double linked list should be fast.
+ * We use a red-black tree for the per-filesystem reservation list.
*
*/
static ext3_grpblk_t
@@ -1063,7 +1239,7 @@
struct ext3_reserve_window_node * my_rsv,
unsigned long *count, int *errp)
{
- ext3_fsblk_t group_first_block;
+ ext3_fsblk_t group_first_block, group_last_block;
ext3_grpblk_t ret = 0;
int fatal;
unsigned long num = *count;
@@ -1100,6 +1276,7 @@
* first block is the block number of the first block in this group
*/
group_first_block = ext3_group_first_block_no(sb, group);
+ group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1);
/*
* Basically we will allocate a new block from inode's reservation
@@ -1118,7 +1295,8 @@
*/
while (1) {
if (rsv_is_empty(&my_rsv->rsv_window) || (ret < 0) ||
- !goal_in_my_reservation(&my_rsv->rsv_window, grp_goal, group, sb)) {
+ !goal_in_my_reservation(&my_rsv->rsv_window,
+ grp_goal, group, sb)) {
if (my_rsv->rsv_goal_size < *count)
my_rsv->rsv_goal_size = *count;
ret = alloc_new_reservation(my_rsv, grp_goal, sb,
@@ -1126,17 +1304,21 @@
if (ret < 0)
break; /* failed */
- if (!goal_in_my_reservation(&my_rsv->rsv_window, grp_goal, group, sb))
+ if (!goal_in_my_reservation(&my_rsv->rsv_window,
+ grp_goal, group, sb))
grp_goal = -1;
- } else if (grp_goal > 0 && (my_rsv->rsv_end-grp_goal+1) < *count)
+ } else if (grp_goal > 0 &&
+ (my_rsv->rsv_end-grp_goal+1) < *count)
try_to_extend_reservation(my_rsv, sb,
*count-my_rsv->rsv_end + grp_goal - 1);
- if ((my_rsv->rsv_start >= group_first_block + EXT3_BLOCKS_PER_GROUP(sb))
- || (my_rsv->rsv_end < group_first_block))
+ if ((my_rsv->rsv_start > group_last_block) ||
+ (my_rsv->rsv_end < group_first_block)) {
+ rsv_window_dump(&EXT3_SB(sb)->s_rsv_window_root, 1);
BUG();
- ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, grp_goal,
- &num, &my_rsv->rsv_window);
+ }
+ ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh,
+ grp_goal, &num, &my_rsv->rsv_window);
if (ret >= 0) {
my_rsv->rsv_alloc_hit += num;
*count = num;
@@ -1161,6 +1343,12 @@
return ret;
}
+/**
+ * ext3_has_free_blocks()
+ * @sbi: in-core super block structure.
+ *
+ * Check if filesystem has at least 1 free block available for allocation.
+ */
static int ext3_has_free_blocks(struct ext3_sb_info *sbi)
{
ext3_fsblk_t free_blocks, root_blocks;
@@ -1175,11 +1363,17 @@
return 1;
}
-/*
+/**
+ * ext3_should_retry_alloc()
+ * @sb: super block
+ * @retries number of attemps has been made
+ *
* ext3_should_retry_alloc() is called when ENOSPC is returned, and if
* it is profitable to retry the operation, this function will wait
* for the current or commiting transaction to complete, and then
* return TRUE.
+ *
+ * if the total number of retries exceed three times, return FALSE.
*/
int ext3_should_retry_alloc(struct super_block *sb, int *retries)
{
@@ -1191,13 +1385,19 @@
return journal_force_commit_nested(EXT3_SB(sb)->s_journal);
}
-/*
- * ext3_new_block uses a goal block to assist allocation. If the goal is
- * free, or there is a free block within 32 blocks of the goal, that block
- * is allocated. Otherwise a forward search is made for a free block; within
- * each block group the search first looks for an entire free byte in the block
- * bitmap, and then for any free bit if that fails.
- * This function also updates quota and i_blocks field.
+/**
+ * ext3_new_blocks() -- core block(s) allocation function
+ * @handle: handle to this transaction
+ * @inode: file inode
+ * @goal: given target block(filesystem wide)
+ * @count: target number of blocks to allocate
+ * @errp: error code
+ *
+ * ext3_new_blocks uses a goal block to assist allocation. It tries to
+ * allocate block(s) from the block group contains the goal block first. If that
+ * fails, it will try to allocate block(s) from other block groups without
+ * any specific goal block.
+ *
*/
ext3_fsblk_t ext3_new_blocks(handle_t *handle, struct inode *inode,
ext3_fsblk_t goal, unsigned long *count, int *errp)
@@ -1303,7 +1503,7 @@
smp_rmb();
/*
- * Now search the rest of the groups. We assume that
+ * Now search the rest of the groups. We assume that
* i and gdp correctly point to the last group visited.
*/
for (bgi = 0; bgi < ngroups; bgi++) {
@@ -1428,7 +1628,7 @@
spin_lock(sb_bgl_lock(sbi, group_no));
gdp->bg_free_blocks_count =
- cpu_to_le16(le16_to_cpu(gdp->bg_free_blocks_count) - num);
+ cpu_to_le16(le16_to_cpu(gdp->bg_free_blocks_count)-num);
spin_unlock(sb_bgl_lock(sbi, group_no));
percpu_counter_mod(&sbi->s_freeblocks_counter, -num);
@@ -1471,6 +1671,12 @@
return ext3_new_blocks(handle, inode, goal, &count, errp);
}
+/**
+ * ext3_count_free_blocks() -- count filesystem free blocks
+ * @sb: superblock
+ *
+ * Adds up the number of free blocks from each block group.
+ */
ext3_fsblk_t ext3_count_free_blocks(struct super_block *sb)
{
ext3_fsblk_t desc_count;
diff --git a/fs/ext3/bitmap.c b/fs/ext3/bitmap.c
index ce4f82b..b9176ee 100644
--- a/fs/ext3/bitmap.c
+++ b/fs/ext3/bitmap.c
@@ -20,7 +20,7 @@
unsigned int i;
unsigned long sum = 0;
- if (!map)
+ if (!map)
return (0);
for (i = 0; i < numchars; i++)
sum += nibblemap[map->b_data[i] & 0xf] +
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index fbb0d4e..429acbb 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -59,7 +59,7 @@
return (ext3_filetype_table[filetype]);
}
-
+
int ext3_check_dir_entry (const char * function, struct inode * dir,
struct ext3_dir_entry_2 * de,
@@ -67,7 +67,7 @@
unsigned long offset)
{
const char * error_msg = NULL;
- const int rlen = le16_to_cpu(de->rec_len);
+ const int rlen = le16_to_cpu(de->rec_len);
if (rlen < EXT3_DIR_REC_LEN(1))
error_msg = "rec_len is smaller than minimal";
@@ -162,7 +162,7 @@
* to make sure. */
if (filp->f_version != inode->i_version) {
for (i = 0; i < sb->s_blocksize && i < offset; ) {
- de = (struct ext3_dir_entry_2 *)
+ de = (struct ext3_dir_entry_2 *)
(bh->b_data + i);
/* It's too expensive to do a full
* dirent test each time round this
@@ -181,7 +181,7 @@
filp->f_version = inode->i_version;
}
- while (!error && filp->f_pos < inode->i_size
+ while (!error && filp->f_pos < inode->i_size
&& offset < sb->s_blocksize) {
de = (struct ext3_dir_entry_2 *) (bh->b_data + offset);
if (!ext3_check_dir_entry ("ext3_readdir", inode, de,
@@ -229,7 +229,7 @@
/*
* These functions convert from the major/minor hash to an f_pos
* value.
- *
+ *
* Currently we only use major hash numer. This is unfortunate, but
* on 32-bit machines, the same VFS interface is used for lseek and
* llseek, so if we use the 64 bit offset, then the 32-bit versions of
@@ -250,7 +250,7 @@
struct fname {
__u32 hash;
__u32 minor_hash;
- struct rb_node rb_hash;
+ struct rb_node rb_hash;
struct fname *next;
__u32 inode;
__u8 name_len;
@@ -343,10 +343,9 @@
/* Create and allocate the fname structure */
len = sizeof(struct fname) + dirent->name_len + 1;
- new_fn = kmalloc(len, GFP_KERNEL);
+ new_fn = kzalloc(len, GFP_KERNEL);
if (!new_fn)
return -ENOMEM;
- memset(new_fn, 0, len);
new_fn->hash = hash;
new_fn->minor_hash = minor_hash;
new_fn->inode = le32_to_cpu(dirent->inode);
@@ -410,7 +409,7 @@
curr_pos = hash2pos(fname->hash, fname->minor_hash);
while (fname) {
error = filldir(dirent, fname->name,
- fname->name_len, curr_pos,
+ fname->name_len, curr_pos,
fname->inode,
get_dtype(sb, fname->file_type));
if (error) {
@@ -465,7 +464,7 @@
/*
* Fill the rbtree if we have no more entries,
* or the inode has changed since we last read in the
- * cached entries.
+ * cached entries.
*/
if ((!info->curr_node) ||
(filp->f_version != inode->i_version)) {
diff --git a/fs/ext3/file.c b/fs/ext3/file.c
index 1efefb6..994efd1 100644
--- a/fs/ext3/file.c
+++ b/fs/ext3/file.c
@@ -100,7 +100,7 @@
force_commit:
err = ext3_force_commit(inode->i_sb);
- if (err)
+ if (err)
return err;
return ret;
}
diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c
index 49382a2..dd1fd3c 100644
--- a/fs/ext3/fsync.c
+++ b/fs/ext3/fsync.c
@@ -8,14 +8,14 @@
* Universite Pierre et Marie Curie (Paris VI)
* from
* linux/fs/minix/truncate.c Copyright (C) 1991, 1992 Linus Torvalds
- *
+ *
* ext3fs fsync primitive
*
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
- *
+ *
* Removed unnecessary code duplication for little endian machines
- * and excessive __inline__s.
+ * and excessive __inline__s.
* Andi Kleen, 1997
*
* Major simplications and cleanup - we only need to do the metadata, because
diff --git a/fs/ext3/hash.c b/fs/ext3/hash.c
index 5a2d123..deeb27b 100644
--- a/fs/ext3/hash.c
+++ b/fs/ext3/hash.c
@@ -4,7 +4,7 @@
* Copyright (C) 2002 by Theodore Ts'o
*
* This file is released under the GPL v2.
- *
+ *
* This file may be redistributed under the terms of the GNU Public
* License.
*/
@@ -80,11 +80,11 @@
* Returns the hash of a filename. If len is 0 and name is NULL, then
* this function can be used to test whether or not a hash version is
* supported.
- *
+ *
* The seed is an 4 longword (32 bits) "secret" which can be used to
* uniquify a hash. If the seed is all zero's, then some default seed
* may be used.
- *
+ *
* A particular hash version specifies whether or not the seed is
* represented, and whether or not the returned hash is 32 bits or 64
* bits. 32 bit hashes will return 0 for the minor hash.
@@ -95,7 +95,7 @@
__u32 minor_hash = 0;
const char *p;
int i;
- __u32 in[8], buf[4];
+ __u32 in[8], buf[4];
/* Initialize the default seed for the hash checksum functions */
buf[0] = 0x67452301;
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index 36546ed..e45dbd6 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -202,7 +202,7 @@
static int find_group_dir(struct super_block *sb, struct inode *parent)
{
int ngroups = EXT3_SB(sb)->s_groups_count;
- int freei, avefreei;
+ unsigned int freei, avefreei;
struct ext3_group_desc *desc, *best_desc = NULL;
struct buffer_head *bh;
int group, best_group = -1;
@@ -216,7 +216,7 @@
continue;
if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
continue;
- if (!best_desc ||
+ if (!best_desc ||
(le16_to_cpu(desc->bg_free_blocks_count) >
le16_to_cpu(best_desc->bg_free_blocks_count))) {
best_group = group;
@@ -226,30 +226,30 @@
return best_group;
}
-/*
- * Orlov's allocator for directories.
- *
+/*
+ * Orlov's allocator for directories.
+ *
* We always try to spread first-level directories.
*
- * If there are blockgroups with both free inodes and free blocks counts
- * not worse than average we return one with smallest directory count.
- * Otherwise we simply return a random group.
- *
- * For the rest rules look so:
- *
- * It's OK to put directory into a group unless
- * it has too many directories already (max_dirs) or
- * it has too few free inodes left (min_inodes) or
- * it has too few free blocks left (min_blocks) or
- * it's already running too large debt (max_debt).
- * Parent's group is prefered, if it doesn't satisfy these
- * conditions we search cyclically through the rest. If none
- * of the groups look good we just look for a group with more
- * free inodes than average (starting at parent's group).
- *
- * Debt is incremented each time we allocate a directory and decremented
- * when we allocate an inode, within 0--255.
- */
+ * If there are blockgroups with both free inodes and free blocks counts
+ * not worse than average we return one with smallest directory count.
+ * Otherwise we simply return a random group.
+ *
+ * For the rest rules look so:
+ *
+ * It's OK to put directory into a group unless
+ * it has too many directories already (max_dirs) or
+ * it has too few free inodes left (min_inodes) or
+ * it has too few free blocks left (min_blocks) or
+ * it's already running too large debt (max_debt).
+ * Parent's group is prefered, if it doesn't satisfy these
+ * conditions we search cyclically through the rest. If none
+ * of the groups look good we just look for a group with more
+ * free inodes than average (starting at parent's group).
+ *
+ * Debt is incremented each time we allocate a directory and decremented
+ * when we allocate an inode, within 0--255.
+ */
#define INODE_COST 64
#define BLOCK_COST 256
@@ -261,10 +261,10 @@
struct ext3_super_block *es = sbi->s_es;
int ngroups = sbi->s_groups_count;
int inodes_per_group = EXT3_INODES_PER_GROUP(sb);
- int freei, avefreei;
+ unsigned int freei, avefreei;
ext3_fsblk_t freeb, avefreeb;
ext3_fsblk_t blocks_per_dir;
- int ndirs;
+ unsigned int ndirs;
int max_debt, max_dirs, min_inodes;
ext3_grpblk_t min_blocks;
int group = -1, i;
@@ -454,7 +454,7 @@
group = find_group_dir(sb, dir);
else
group = find_group_orlov(sb, dir);
- } else
+ } else
group = find_group_other(sb, dir);
err = -ENOSPC;
@@ -559,7 +559,6 @@
inode->i_ino = ino;
/* This is the optimal IO size (for stat), not the fs block size */
- inode->i_blksize = PAGE_SIZE;
inode->i_blocks = 0;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 84be02e..dcf4f1d 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -13,11 +13,11 @@
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Goal-directed block allocation by Stephen Tweedie
- * (sct@redhat.com), 1993, 1998
+ * (sct@redhat.com), 1993, 1998
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
* 64-bit file support on 64-bit platforms by Jakub Jelinek
- * (jj@sunsite.ms.mff.cuni.cz)
+ * (jj@sunsite.ms.mff.cuni.cz)
*
* Assorted race fixes, rewrite of ext3_get_block() by Al Viro, 2000
*/
@@ -55,7 +55,7 @@
/*
* The ext3 forget function must perform a revoke if we are freeing data
* which has been journaled. Metadata (eg. indirect blocks) must be
- * revoked in all cases.
+ * revoked in all cases.
*
* "bh" may be NULL: a metadata block may have been freed from memory
* but there may still be a record of it in the journal, and that record
@@ -105,7 +105,7 @@
* Work out how many blocks we need to proceed with the next chunk of a
* truncate transaction.
*/
-static unsigned long blocks_for_truncate(struct inode *inode)
+static unsigned long blocks_for_truncate(struct inode *inode)
{
unsigned long needed;
@@ -122,13 +122,13 @@
/* But we need to bound the transaction so we don't overflow the
* journal. */
- if (needed > EXT3_MAX_TRANS_DATA)
+ if (needed > EXT3_MAX_TRANS_DATA)
needed = EXT3_MAX_TRANS_DATA;
return EXT3_DATA_TRANS_BLOCKS(inode->i_sb) + needed;
}
-/*
+/*
* Truncate transactions can be complex and absolutely huge. So we need to
* be able to restart the transaction at a conventient checkpoint to make
* sure we don't overflow the journal.
@@ -136,9 +136,9 @@
* start_transaction gets us a new handle for a truncate transaction,
* and extend_transaction tries to extend the existing one a bit. If
* extend fails, we need to propagate the failure up and restart the
- * transaction in the top-level truncate loop. --sct
+ * transaction in the top-level truncate loop. --sct
*/
-static handle_t *start_transaction(struct inode *inode)
+static handle_t *start_transaction(struct inode *inode)
{
handle_t *result;
@@ -215,12 +215,12 @@
ext3_orphan_del(handle, inode);
EXT3_I(inode)->i_dtime = get_seconds();
- /*
+ /*
* One subtle ordering requirement: if anything has gone wrong
* (transaction abort, IO errors, whatever), then we can still
* do these next steps (the fs will already have been marked as
* having errors), but we can't free the inode if the mark_dirty
- * fails.
+ * fails.
*/
if (ext3_mark_inode_dirty(handle, inode))
/* If that failed, just do the required in-core inode clear. */
@@ -398,7 +398,7 @@
* + if there is a block to the left of our position - allocate near it.
* + if pointer will live in indirect block - allocate near that block.
* + if pointer will live in inode - allocate in the same
- * cylinder group.
+ * cylinder group.
*
* In the latter case we colour the starting block by the callers PID to
* prevent it from clashing with concurrent allocations for a different inode
@@ -470,7 +470,7 @@
* ext3_blks_to_allocate: Look up the block map and count the number
* of direct blocks need to be allocated for the given branch.
*
- * @branch: chain of indirect blocks
+ * @branch: chain of indirect blocks
* @k: number of blocks need for indirect blocks
* @blks: number of data blocks to be mapped.
* @blocks_to_boundary: the offset in the indirect block
@@ -744,7 +744,7 @@
jbd_debug(5, "splicing indirect only\n");
BUFFER_TRACE(where->bh, "call ext3_journal_dirty_metadata");
err = ext3_journal_dirty_metadata(handle, where->bh);
- if (err)
+ if (err)
goto err_out;
} else {
/*
@@ -1098,7 +1098,7 @@
for ( bh = head, block_start = 0;
ret == 0 && (bh != head || !block_start);
- block_start = block_end, bh = next)
+ block_start = block_end, bh = next)
{
next = bh->b_this_page;
block_end = block_start + blocksize;
@@ -1137,7 +1137,7 @@
* So what we do is to rely on the fact that journal_stop/journal_start
* will _not_ run commit under these circumstances because handle->h_ref
* is elevated. We'll still have enough credits for the tiny quotafile
- * write.
+ * write.
*/
static int do_journal_get_write_access(handle_t *handle,
struct buffer_head *bh)
@@ -1282,7 +1282,7 @@
if (inode->i_size > EXT3_I(inode)->i_disksize) {
EXT3_I(inode)->i_disksize = inode->i_size;
ret2 = ext3_mark_inode_dirty(handle, inode);
- if (!ret)
+ if (!ret)
ret = ret2;
}
ret2 = ext3_journal_stop(handle);
@@ -1291,7 +1291,7 @@
return ret;
}
-/*
+/*
* bmap() is special. It gets used by applications such as lilo and by
* the swapper to find the on-disk block of a specific piece of data.
*
@@ -1300,10 +1300,10 @@
* filesystem and enables swap, then they may get a nasty shock when the
* data getting swapped to that swapfile suddenly gets overwritten by
* the original zero's written out previously to the journal and
- * awaiting writeback in the kernel's buffer cache.
+ * awaiting writeback in the kernel's buffer cache.
*
* So, if we see any bmap calls here on a modified, data-journaled file,
- * take extra steps to flush any blocks which might be in the cache.
+ * take extra steps to flush any blocks which might be in the cache.
*/
static sector_t ext3_bmap(struct address_space *mapping, sector_t block)
{
@@ -1312,16 +1312,16 @@
int err;
if (EXT3_I(inode)->i_state & EXT3_STATE_JDATA) {
- /*
+ /*
* This is a REALLY heavyweight approach, but the use of
* bmap on dirty files is expected to be extremely rare:
* only if we run lilo or swapon on a freshly made file
- * do we expect this to happen.
+ * do we expect this to happen.
*
* (bmap requires CAP_SYS_RAWIO so this does not
* represent an unprivileged user DOS attack --- we'd be
* in trouble if mortal users could trigger this path at
- * will.)
+ * will.)
*
* NB. EXT3_STATE_JDATA is not set on files other than
* regular files. If somebody wants to bmap a directory
@@ -1457,7 +1457,7 @@
*/
/*
- * And attach them to the current transaction. But only if
+ * And attach them to the current transaction. But only if
* block_write_full_page() succeeded. Otherwise they are unmapped,
* and generally junk.
*/
@@ -1644,7 +1644,7 @@
}
}
- ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
+ ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext3_get_block, NULL);
@@ -2025,7 +2025,7 @@
__le32 *first, __le32 *last)
{
ext3_fsblk_t block_to_free = 0; /* Starting block # of a run */
- unsigned long count = 0; /* Number of blocks in the run */
+ unsigned long count = 0; /* Number of blocks in the run */
__le32 *block_to_free_p = NULL; /* Pointer into inode/ind
corresponding to
block_to_free */
@@ -2054,7 +2054,7 @@
} else if (nr == block_to_free + count) {
count++;
} else {
- ext3_clear_blocks(handle, inode, this_bh,
+ ext3_clear_blocks(handle, inode, this_bh,
block_to_free,
count, block_to_free_p, p);
block_to_free = nr;
@@ -2115,7 +2115,7 @@
*/
if (!bh) {
ext3_error(inode->i_sb, "ext3_free_branches",
- "Read failure, inode=%ld, block="E3FSBLK,
+ "Read failure, inode=%lu, block="E3FSBLK,
inode->i_ino, nr);
continue;
}
@@ -2184,7 +2184,7 @@
*p = 0;
BUFFER_TRACE(parent_bh,
"call ext3_journal_dirty_metadata");
- ext3_journal_dirty_metadata(handle,
+ ext3_journal_dirty_metadata(handle,
parent_bh);
}
}
@@ -2632,9 +2632,6 @@
* recovery code: that's fine, we're about to complete
* the process of deleting those. */
}
- inode->i_blksize = PAGE_SIZE; /* This is the optimal IO size
- * (for stat), not the fs block
- * size */
inode->i_blocks = le32_to_cpu(raw_inode->i_blocks);
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
#ifdef EXT3_FRAGMENTS
@@ -2704,7 +2701,7 @@
if (raw_inode->i_block[0])
init_special_inode(inode, inode->i_mode,
old_decode_dev(le32_to_cpu(raw_inode->i_block[0])));
- else
+ else
init_special_inode(inode, inode->i_mode,
new_decode_dev(le32_to_cpu(raw_inode->i_block[1])));
}
@@ -2724,8 +2721,8 @@
*
* The caller must have write access to iloc->bh.
*/
-static int ext3_do_update_inode(handle_t *handle,
- struct inode *inode,
+static int ext3_do_update_inode(handle_t *handle,
+ struct inode *inode,
struct ext3_iloc *iloc)
{
struct ext3_inode *raw_inode = ext3_raw_inode(iloc);
@@ -2900,7 +2897,7 @@
* commit will leave the blocks being flushed in an unused state on
* disk. (On recovery, the inode will get truncated and the blocks will
* be freed, so we have a strong guarantee that no future commit will
- * leave these blocks visible to the user.)
+ * leave these blocks visible to the user.)
*
* Called with inode->sem down.
*/
@@ -3043,13 +3040,13 @@
return err;
}
-/*
+/*
* On success, We end up with an outstanding reference count against
- * iloc->bh. This _must_ be cleaned up later.
+ * iloc->bh. This _must_ be cleaned up later.
*/
int
-ext3_reserve_inode_write(handle_t *handle, struct inode *inode,
+ext3_reserve_inode_write(handle_t *handle, struct inode *inode,
struct ext3_iloc *iloc)
{
int err = 0;
@@ -3139,7 +3136,7 @@
}
#if 0
-/*
+/*
* Bind an inode's backing buffer_head into this transaction, to prevent
* it from being flushed to disk early. Unlike
* ext3_reserve_inode_write, this leaves behind no bh reference and
@@ -3157,7 +3154,7 @@
BUFFER_TRACE(iloc.bh, "get_write_access");
err = journal_get_write_access(handle, iloc.bh);
if (!err)
- err = ext3_journal_dirty_metadata(handle,
+ err = ext3_journal_dirty_metadata(handle,
iloc.bh);
brelse(iloc.bh);
}
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 2aa7101..85d132c 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -15,13 +15,13 @@
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
* Directory entry file type support and forward compatibility hooks
- * for B-tree directories by Theodore Ts'o (tytso@mit.edu), 1998
+ * for B-tree directories by Theodore Ts'o (tytso@mit.edu), 1998
* Hash Tree Directory indexing (c)
- * Daniel Phillips, 2001
+ * Daniel Phillips, 2001
* Hash Tree Directory indexing porting
- * Christopher Li, 2002
+ * Christopher Li, 2002
* Hash Tree Directory indexing cleanup
- * Theodore Ts'o, 2002
+ * Theodore Ts'o, 2002
*/
#include <linux/fs.h>
@@ -76,7 +76,7 @@
#ifdef DX_DEBUG
#define dxtrace(command) command
#else
-#define dxtrace(command)
+#define dxtrace(command)
#endif
struct fake_dirent
@@ -169,7 +169,7 @@
static void dx_insert_block (struct dx_frame *frame, u32 hash, u32 block);
static int ext3_htree_next_block(struct inode *dir, __u32 hash,
struct dx_frame *frame,
- struct dx_frame *frames,
+ struct dx_frame *frames,
__u32 *start_hash);
static struct buffer_head * ext3_dx_find_entry(struct dentry *dentry,
struct ext3_dir_entry_2 **res_dir, int *err);
@@ -250,7 +250,7 @@
}
struct stats
-{
+{
unsigned names;
unsigned space;
unsigned bcount;
@@ -278,7 +278,7 @@
((char *) de - base));
}
space += EXT3_DIR_REC_LEN(de->name_len);
- names++;
+ names++;
}
de = (struct ext3_dir_entry_2 *) ((char *) de + le16_to_cpu(de->rec_len));
}
@@ -464,7 +464,7 @@
*/
static int ext3_htree_next_block(struct inode *dir, __u32 hash,
struct dx_frame *frame,
- struct dx_frame *frames,
+ struct dx_frame *frames,
__u32 *start_hash)
{
struct dx_frame *p;
@@ -632,7 +632,7 @@
}
count += ret;
hashval = ~0;
- ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS,
+ ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS,
frame, frames, &hashval);
*next_hash = hashval;
if (ret < 0) {
@@ -649,7 +649,7 @@
break;
}
dx_release(frames);
- dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n",
+ dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n",
count, *next_hash));
return count;
errout:
@@ -1050,7 +1050,7 @@
parent = ERR_PTR(-ENOMEM);
}
return parent;
-}
+}
#define S_SHIFT 12
static unsigned char ext3_type_by_mode[S_IFMT >> S_SHIFT] = {
@@ -1198,7 +1198,7 @@
* add_dirent_to_buf will attempt search the directory block for
* space. It will return -ENOSPC if no space is available, and -EIO
* and -EEXIST if directory entry already exists.
- *
+ *
* NOTE! bh is NOT released in the case where ENOSPC is returned. In
* all other cases bh is released.
*/
@@ -1572,7 +1572,7 @@
* ext3_delete_entry deletes a directory entry by merging it with the
* previous entry
*/
-static int ext3_delete_entry (handle_t *handle,
+static int ext3_delete_entry (handle_t *handle,
struct inode * dir,
struct ext3_dir_entry_2 * de_del,
struct buffer_head * bh)
@@ -1643,12 +1643,12 @@
* is so far negative - it has no inode.
*
* If the create succeeds, we fill in the inode information
- * with d_instantiate().
+ * with d_instantiate().
*/
static int ext3_create (struct inode * dir, struct dentry * dentry, int mode,
struct nameidata *nd)
{
- handle_t *handle;
+ handle_t *handle;
struct inode * inode;
int err, retries = 0;
@@ -1688,7 +1688,7 @@
retry:
handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
- EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
+ EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
@@ -1813,10 +1813,10 @@
de1 = (struct ext3_dir_entry_2 *)
((char *) de + le16_to_cpu(de->rec_len));
if (le32_to_cpu(de->inode) != inode->i_ino ||
- !le32_to_cpu(de1->inode) ||
+ !le32_to_cpu(de1->inode) ||
strcmp (".", de->name) ||
strcmp ("..", de1->name)) {
- ext3_warning (inode->i_sb, "empty_dir",
+ ext3_warning (inode->i_sb, "empty_dir",
"bad directory (dir #%lu) - no `.' or `..'",
inode->i_ino);
brelse (bh);
@@ -1883,7 +1883,7 @@
* being truncated, or files being unlinked. */
/* @@@ FIXME: Observation from aviro:
- * I think I can trigger J_ASSERT in ext3_orphan_add(). We block
+ * I think I can trigger J_ASSERT in ext3_orphan_add(). We block
* here (on lock_super()), so race with ext3_link() which might bump
* ->i_nlink. For, say it, character device. Not a regular file,
* not a directory, not a symlink and ->i_nlink > 0.
@@ -1919,8 +1919,8 @@
if (!err)
list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan);
- jbd_debug(4, "superblock will point to %ld\n", inode->i_ino);
- jbd_debug(4, "orphan inode %ld will point to %d\n",
+ jbd_debug(4, "superblock will point to %lu\n", inode->i_ino);
+ jbd_debug(4, "orphan inode %lu will point to %d\n",
inode->i_ino, NEXT_ORPHAN(inode));
out_unlock:
unlock_super(sb);
@@ -2129,7 +2129,7 @@
retry:
handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
- EXT3_INDEX_EXTRA_TRANS_BLOCKS + 5 +
+ EXT3_INDEX_EXTRA_TRANS_BLOCKS + 5 +
2*EXT3_QUOTA_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
@@ -2227,7 +2227,7 @@
DQUOT_INIT(new_dentry->d_inode);
handle = ext3_journal_start(old_dir, 2 *
EXT3_DATA_TRANS_BLOCKS(old_dir->i_sb) +
- EXT3_INDEX_EXTRA_TRANS_BLOCKS + 2);
+ EXT3_INDEX_EXTRA_TRANS_BLOCKS + 2);
if (IS_ERR(handle))
return PTR_ERR(handle);
@@ -2393,4 +2393,4 @@
.removexattr = generic_removexattr,
#endif
.permission = ext3_permission,
-};
+};
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 5e1337f..b73cba1 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -336,7 +336,7 @@
unsigned five = 5;
unsigned seven = 7;
unsigned grp;
- __u32 *p = (__u32 *)primary->b_data;
+ __le32 *p = (__le32 *)primary->b_data;
int gdbackups = 0;
while ((grp = ext3_list_backups(sb, &three, &five, &seven)) < end) {
@@ -380,7 +380,7 @@
struct buffer_head *dind;
int gdbackups;
struct ext3_iloc iloc;
- __u32 *data;
+ __le32 *data;
int err;
if (test_opt(sb, DEBUG))
@@ -417,7 +417,7 @@
goto exit_bh;
}
- data = (__u32 *)dind->b_data;
+ data = (__le32 *)dind->b_data;
if (le32_to_cpu(data[gdb_num % EXT3_ADDR_PER_BLOCK(sb)]) != gdblock) {
ext3_warning(sb, __FUNCTION__,
"new group %u GDT block "E3FSBLK" not reserved",
@@ -439,8 +439,8 @@
if ((err = ext3_reserve_inode_write(handle, inode, &iloc)))
goto exit_dindj;
- n_group_desc = (struct buffer_head **)kmalloc((gdb_num + 1) *
- sizeof(struct buffer_head *), GFP_KERNEL);
+ n_group_desc = kmalloc((gdb_num + 1) * sizeof(struct buffer_head *),
+ GFP_KERNEL);
if (!n_group_desc) {
err = -ENOMEM;
ext3_warning (sb, __FUNCTION__,
@@ -519,7 +519,7 @@
struct buffer_head *dind;
struct ext3_iloc iloc;
ext3_fsblk_t blk;
- __u32 *data, *end;
+ __le32 *data, *end;
int gdbackups = 0;
int res, i;
int err;
@@ -536,8 +536,8 @@
}
blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count;
- data = (__u32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count;
- end = (__u32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb);
+ data = (__le32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count;
+ end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
for (res = 0; res < reserved_gdb; res++, blk++) {
@@ -545,7 +545,8 @@
ext3_warning(sb, __FUNCTION__,
"reserved block "E3FSBLK
" not at offset %ld",
- blk, (long)(data - (__u32 *)dind->b_data));
+ blk,
+ (long)(data - (__le32 *)dind->b_data));
err = -EINVAL;
goto exit_bh;
}
@@ -560,7 +561,7 @@
goto exit_bh;
}
if (++data >= end)
- data = (__u32 *)dind->b_data;
+ data = (__le32 *)dind->b_data;
}
for (i = 0; i < reserved_gdb; i++) {
@@ -584,7 +585,7 @@
blk = input->group * EXT3_BLOCKS_PER_GROUP(sb);
for (i = 0; i < reserved_gdb; i++) {
int err2;
- data = (__u32 *)primary[i]->b_data;
+ data = (__le32 *)primary[i]->b_data;
/* printk("reserving backup %lu[%u] = %lu\n",
primary[i]->b_blocknr, gdbackups,
blk + primary[i]->b_blocknr); */
@@ -689,7 +690,7 @@
"can't update backup for group %d (err %d), "
"forcing fsck on next reboot", group, err);
sbi->s_mount_state &= ~EXT3_VALID_FS;
- sbi->s_es->s_state &= ~cpu_to_le16(EXT3_VALID_FS);
+ sbi->s_es->s_state &= cpu_to_le16(~EXT3_VALID_FS);
mark_buffer_dirty(sbi->s_sbh);
}
}
@@ -730,6 +731,18 @@
return -EPERM;
}
+ if (le32_to_cpu(es->s_blocks_count) + input->blocks_count <
+ le32_to_cpu(es->s_blocks_count)) {
+ ext3_warning(sb, __FUNCTION__, "blocks_count overflow\n");
+ return -EINVAL;
+ }
+
+ if (le32_to_cpu(es->s_inodes_count) + EXT3_INODES_PER_GROUP(sb) <
+ le32_to_cpu(es->s_inodes_count)) {
+ ext3_warning(sb, __FUNCTION__, "inodes_count overflow\n");
+ return -EINVAL;
+ }
+
if (reserved_gdb || gdb_off == 0) {
if (!EXT3_HAS_COMPAT_FEATURE(sb,
EXT3_FEATURE_COMPAT_RESIZE_INODE)){
@@ -958,6 +971,11 @@
add = EXT3_BLOCKS_PER_GROUP(sb) - last;
+ if (o_blocks_count + add < o_blocks_count) {
+ ext3_warning(sb, __FUNCTION__, "blocks_count overflow");
+ return -EINVAL;
+ }
+
if (o_blocks_count + add > n_blocks_count)
add = n_blocks_count - o_blocks_count;
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 3559086..8bfd56e 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -45,7 +45,7 @@
static int ext3_load_journal(struct super_block *, struct ext3_super_block *,
unsigned long journal_devnum);
static int ext3_create_journal(struct super_block *, struct ext3_super_block *,
- int);
+ unsigned int);
static void ext3_commit_super (struct super_block * sb,
struct ext3_super_block * es,
int sync);
@@ -62,13 +62,13 @@
static void ext3_write_super (struct super_block * sb);
static void ext3_write_super_lockfs(struct super_block *sb);
-/*
+/*
* Wrappers for journal_start/end.
*
* The only special thing we need to do here is to make sure that all
* journal_end calls result in the superblock being marked dirty, so
* that sync() will call the filesystem's write_super callback if
- * appropriate.
+ * appropriate.
*/
handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks)
{
@@ -90,11 +90,11 @@
return journal_start(journal, nblocks);
}
-/*
+/*
* The only special thing we need to do here is to make sure that all
* journal_stop calls result in the superblock being marked dirty, so
* that sync() will call the filesystem's write_super callback if
- * appropriate.
+ * appropriate.
*/
int __ext3_journal_stop(const char *where, handle_t *handle)
{
@@ -159,20 +159,21 @@
if (sb->s_flags & MS_RDONLY)
return;
- if (test_opt (sb, ERRORS_RO)) {
- printk (KERN_CRIT "Remounting filesystem read-only\n");
- sb->s_flags |= MS_RDONLY;
- } else {
+ if (!test_opt (sb, ERRORS_CONT)) {
journal_t *journal = EXT3_SB(sb)->s_journal;
EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT;
if (journal)
journal_abort(journal, -EIO);
}
+ if (test_opt (sb, ERRORS_RO)) {
+ printk (KERN_CRIT "Remounting filesystem read-only\n");
+ sb->s_flags |= MS_RDONLY;
+ }
+ ext3_commit_super(sb, es, 1);
if (test_opt(sb, ERRORS_PANIC))
panic("EXT3-fs (device %s): panic forced after error\n",
sb->s_id);
- ext3_commit_super(sb, es, 1);
}
void ext3_error (struct super_block * sb, const char * function,
@@ -369,16 +370,16 @@
{
struct list_head *l;
- printk(KERN_ERR "sb orphan head is %d\n",
+ printk(KERN_ERR "sb orphan head is %d\n",
le32_to_cpu(sbi->s_es->s_last_orphan));
printk(KERN_ERR "sb_info orphan list:\n");
list_for_each(l, &sbi->s_orphan) {
struct inode *inode = orphan_list_entry(l);
printk(KERN_ERR " "
- "inode %s:%ld at %p: mode %o, nlink %d, next %d\n",
+ "inode %s:%lu at %p: mode %o, nlink %d, next %d\n",
inode->i_sb->s_id, inode->i_ino, inode,
- inode->i_mode, inode->i_nlink,
+ inode->i_mode, inode->i_nlink,
NEXT_ORPHAN(inode));
}
}
@@ -475,7 +476,7 @@
inode_init_once(&ei->vfs_inode);
}
}
-
+
static int init_inodecache(void)
{
ext3_inode_cachep = kmem_cache_create("ext3_inode_cache",
@@ -490,8 +491,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(ext3_inode_cachep))
- printk(KERN_INFO "ext3_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(ext3_inode_cachep);
}
static void ext3_clear_inode(struct inode *inode)
@@ -733,8 +733,8 @@
static ext3_fsblk_t get_sb_block(void **data)
{
- ext3_fsblk_t sb_block;
- char *options = (char *) *data;
+ ext3_fsblk_t sb_block;
+ char *options = (char *) *data;
if (!options || strncmp(options, "sb=", 3) != 0)
return 1; /* Default location */
@@ -753,7 +753,7 @@
}
static int parse_options (char *options, struct super_block *sb,
- unsigned long *inum, unsigned long *journal_devnum,
+ unsigned int *inum, unsigned long *journal_devnum,
ext3_fsblk_t *n_blocks_count, int is_remount)
{
struct ext3_sb_info *sbi = EXT3_SB(sb);
@@ -1174,7 +1174,8 @@
static int ext3_check_descriptors (struct super_block * sb)
{
struct ext3_sb_info *sbi = EXT3_SB(sb);
- ext3_fsblk_t block = le32_to_cpu(sbi->s_es->s_first_data_block);
+ ext3_fsblk_t first_block = le32_to_cpu(sbi->s_es->s_first_data_block);
+ ext3_fsblk_t last_block;
struct ext3_group_desc * gdp = NULL;
int desc_block = 0;
int i;
@@ -1183,12 +1184,17 @@
for (i = 0; i < sbi->s_groups_count; i++)
{
+ if (i == sbi->s_groups_count - 1)
+ last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1;
+ else
+ last_block = first_block +
+ (EXT3_BLOCKS_PER_GROUP(sb) - 1);
+
if ((i % EXT3_DESC_PER_BLOCK(sb)) == 0)
gdp = (struct ext3_group_desc *)
sbi->s_group_desc[desc_block++]->b_data;
- if (le32_to_cpu(gdp->bg_block_bitmap) < block ||
- le32_to_cpu(gdp->bg_block_bitmap) >=
- block + EXT3_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_block_bitmap) < first_block ||
+ le32_to_cpu(gdp->bg_block_bitmap) > last_block)
{
ext3_error (sb, "ext3_check_descriptors",
"Block bitmap for group %d"
@@ -1197,9 +1203,8 @@
le32_to_cpu(gdp->bg_block_bitmap));
return 0;
}
- if (le32_to_cpu(gdp->bg_inode_bitmap) < block ||
- le32_to_cpu(gdp->bg_inode_bitmap) >=
- block + EXT3_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block ||
+ le32_to_cpu(gdp->bg_inode_bitmap) > last_block)
{
ext3_error (sb, "ext3_check_descriptors",
"Inode bitmap for group %d"
@@ -1208,9 +1213,9 @@
le32_to_cpu(gdp->bg_inode_bitmap));
return 0;
}
- if (le32_to_cpu(gdp->bg_inode_table) < block ||
- le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >=
- block + EXT3_BLOCKS_PER_GROUP(sb))
+ if (le32_to_cpu(gdp->bg_inode_table) < first_block ||
+ le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >
+ last_block)
{
ext3_error (sb, "ext3_check_descriptors",
"Inode table for group %d"
@@ -1219,7 +1224,7 @@
le32_to_cpu(gdp->bg_inode_table));
return 0;
}
- block += EXT3_BLOCKS_PER_GROUP(sb);
+ first_block += EXT3_BLOCKS_PER_GROUP(sb);
gdp++;
}
@@ -1301,17 +1306,17 @@
DQUOT_INIT(inode);
if (inode->i_nlink) {
printk(KERN_DEBUG
- "%s: truncating inode %ld to %Ld bytes\n",
+ "%s: truncating inode %lu to %Ld bytes\n",
__FUNCTION__, inode->i_ino, inode->i_size);
- jbd_debug(2, "truncating inode %ld to %Ld bytes\n",
+ jbd_debug(2, "truncating inode %lu to %Ld bytes\n",
inode->i_ino, inode->i_size);
ext3_truncate(inode);
nr_truncates++;
} else {
printk(KERN_DEBUG
- "%s: deleting unreferenced inode %ld\n",
+ "%s: deleting unreferenced inode %lu\n",
__FUNCTION__, inode->i_ino);
- jbd_debug(2, "deleting unreferenced inode %ld\n",
+ jbd_debug(2, "deleting unreferenced inode %lu\n",
inode->i_ino);
nr_orphans++;
}
@@ -1390,7 +1395,7 @@
ext3_fsblk_t sb_block = get_sb_block(&data);
ext3_fsblk_t logic_sb_block;
unsigned long offset = 0;
- unsigned long journal_inum = 0;
+ unsigned int journal_inum = 0;
unsigned long journal_devnum = 0;
unsigned long def_mount_opts;
struct inode *root;
@@ -1401,11 +1406,10 @@
int needs_recovery;
__le32 features;
- sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
+ sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sb->s_fs_info = sbi;
- memset(sbi, 0, sizeof(*sbi));
sbi->s_mount_opt = 0;
sbi->s_resuid = EXT3_DEF_RESUID;
sbi->s_resgid = EXT3_DEF_RESGID;
@@ -1483,7 +1487,7 @@
(EXT3_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U)))
- printk(KERN_WARNING
+ printk(KERN_WARNING
"EXT3-fs warning: feature flags set on rev 0 fs, "
"running e2fsck is recommended\n");
/*
@@ -1509,7 +1513,7 @@
if (blocksize < EXT3_MIN_BLOCK_SIZE ||
blocksize > EXT3_MAX_BLOCK_SIZE) {
- printk(KERN_ERR
+ printk(KERN_ERR
"EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
blocksize, sb->s_id);
goto failed_mount;
@@ -1533,14 +1537,14 @@
offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize;
bh = sb_bread(sb, logic_sb_block);
if (!bh) {
- printk(KERN_ERR
+ printk(KERN_ERR
"EXT3-fs: Can't read superblock on 2nd try.\n");
goto failed_mount;
}
es = (struct ext3_super_block *)(((char *)bh->b_data) + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) {
- printk (KERN_ERR
+ printk (KERN_ERR
"EXT3-fs: Magic mismatch, very weird !\n");
goto failed_mount;
}
@@ -1622,10 +1626,9 @@
if (EXT3_BLOCKS_PER_GROUP(sb) == 0)
goto cantfind_ext3;
- sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) -
- le32_to_cpu(es->s_first_data_block) +
- EXT3_BLOCKS_PER_GROUP(sb) - 1) /
- EXT3_BLOCKS_PER_GROUP(sb);
+ sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
+ le32_to_cpu(es->s_first_data_block) - 1)
+ / EXT3_BLOCKS_PER_GROUP(sb)) + 1;
db_count = (sbi->s_groups_count + EXT3_DESC_PER_BLOCK(sb) - 1) /
EXT3_DESC_PER_BLOCK(sb);
sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
@@ -1820,7 +1823,7 @@
/*
* Setup any per-fs journal parameters now. We'll do this both on
* initial mount, once the journal has been initialised but before we've
- * done any recovery; and again on any subsequent remount.
+ * done any recovery; and again on any subsequent remount.
*/
static void ext3_init_journal_params(struct super_block *sb, journal_t *journal)
{
@@ -1840,7 +1843,8 @@
spin_unlock(&journal->j_state_lock);
}
-static journal_t *ext3_get_journal(struct super_block *sb, int journal_inum)
+static journal_t *ext3_get_journal(struct super_block *sb,
+ unsigned int journal_inum)
{
struct inode *journal_inode;
journal_t *journal;
@@ -1975,7 +1979,7 @@
unsigned long journal_devnum)
{
journal_t *journal;
- int journal_inum = le32_to_cpu(es->s_journal_inum);
+ unsigned int journal_inum = le32_to_cpu(es->s_journal_inum);
dev_t journal_dev;
int err = 0;
int really_read_only;
@@ -2061,7 +2065,7 @@
static int ext3_create_journal(struct super_block * sb,
struct ext3_super_block * es,
- int journal_inum)
+ unsigned int journal_inum)
{
journal_t *journal;
@@ -2074,7 +2078,7 @@
if (!(journal = ext3_get_journal(sb, journal_inum)))
return -EINVAL;
- printk(KERN_INFO "EXT3-fs: creating new journal on inode %d\n",
+ printk(KERN_INFO "EXT3-fs: creating new journal on inode %u\n",
journal_inum);
if (journal_create(journal)) {
@@ -2342,10 +2346,8 @@
*/
ext3_clear_journal_err(sb, es);
sbi->s_mount_state = le16_to_cpu(es->s_state);
- if ((ret = ext3_group_extend(sb, es, n_blocks_count))) {
- err = ret;
+ if ((err = ext3_group_extend(sb, es, n_blocks_count)))
goto restore_opts;
- }
if (!ext3_setup_super (sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
}
@@ -2734,7 +2736,7 @@
out:
destroy_inodecache();
out1:
- exit_ext3_xattr();
+ exit_ext3_xattr();
return err;
}
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index a44a056..f86f248 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -75,7 +75,7 @@
#ifdef EXT3_XATTR_DEBUG
# define ea_idebug(inode, f...) do { \
- printk(KERN_DEBUG "inode %s:%ld: ", \
+ printk(KERN_DEBUG "inode %s:%lu: ", \
inode->i_sb->s_id, inode->i_ino); \
printk(f); \
printk("\n"); \
@@ -233,7 +233,7 @@
atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount));
if (ext3_xattr_check_block(bh)) {
bad_block: ext3_error(inode->i_sb, __FUNCTION__,
- "inode %ld: bad block "E3FSBLK, inode->i_ino,
+ "inode %lu: bad block "E3FSBLK, inode->i_ino,
EXT3_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
@@ -375,7 +375,7 @@
atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount));
if (ext3_xattr_check_block(bh)) {
ext3_error(inode->i_sb, __FUNCTION__,
- "inode %ld: bad block "E3FSBLK, inode->i_ino,
+ "inode %lu: bad block "E3FSBLK, inode->i_ino,
EXT3_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
@@ -647,7 +647,7 @@
le32_to_cpu(BHDR(bs->bh)->h_refcount));
if (ext3_xattr_check_block(bs->bh)) {
ext3_error(sb, __FUNCTION__,
- "inode %ld: bad block "E3FSBLK, inode->i_ino,
+ "inode %lu: bad block "E3FSBLK, inode->i_ino,
EXT3_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
@@ -848,7 +848,7 @@
bad_block:
ext3_error(inode->i_sb, __FUNCTION__,
- "inode %ld: bad block "E3FSBLK, inode->i_ino,
+ "inode %lu: bad block "E3FSBLK, inode->i_ino,
EXT3_I(inode)->i_file_acl);
goto cleanup;
@@ -1077,14 +1077,14 @@
bh = sb_bread(inode->i_sb, EXT3_I(inode)->i_file_acl);
if (!bh) {
ext3_error(inode->i_sb, __FUNCTION__,
- "inode %ld: block "E3FSBLK" read error", inode->i_ino,
+ "inode %lu: block "E3FSBLK" read error", inode->i_ino,
EXT3_I(inode)->i_file_acl);
goto cleanup;
}
if (BHDR(bh)->h_magic != cpu_to_le32(EXT3_XATTR_MAGIC) ||
BHDR(bh)->h_blocks != cpu_to_le32(1)) {
ext3_error(inode->i_sb, __FUNCTION__,
- "inode %ld: bad block "E3FSBLK, inode->i_ino,
+ "inode %lu: bad block "E3FSBLK, inode->i_ino,
EXT3_I(inode)->i_file_acl);
goto cleanup;
}
@@ -1211,7 +1211,7 @@
bh = sb_bread(inode->i_sb, ce->e_block);
if (!bh) {
ext3_error(inode->i_sb, __FUNCTION__,
- "inode %ld: block %lu read error",
+ "inode %lu: block %lu read error",
inode->i_ino, (unsigned long) ce->e_block);
} else if (le32_to_cpu(BHDR(bh)->h_refcount) >=
EXT3_XATTR_REFCOUNT_MAX) {
diff --git a/fs/fat/cache.c b/fs/fat/cache.c
index 97b967b..82cc4f59 100644
--- a/fs/fat/cache.c
+++ b/fs/fat/cache.c
@@ -58,8 +58,7 @@
void fat_cache_destroy(void)
{
- if (kmem_cache_destroy(fat_cache_cachep))
- printk(KERN_INFO "fat_cache: not all structures were freed\n");
+ kmem_cache_destroy(fat_cache_cachep);
}
static inline struct fat_cache *fat_cache_alloc(struct inode *inode)
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 31b7174..ab96ae8 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -50,14 +50,14 @@
return err;
}
-static int __fat_get_blocks(struct inode *inode, sector_t iblock,
- unsigned long *max_blocks,
- struct buffer_head *bh_result, int create)
+static inline int __fat_get_block(struct inode *inode, sector_t iblock,
+ unsigned long *max_blocks,
+ struct buffer_head *bh_result, int create)
{
struct super_block *sb = inode->i_sb;
struct msdos_sb_info *sbi = MSDOS_SB(sb);
- sector_t phys;
unsigned long mapped_blocks;
+ sector_t phys;
int err, offset;
err = fat_bmap(inode, iblock, &phys, &mapped_blocks);
@@ -73,7 +73,7 @@
if (iblock != MSDOS_I(inode)->mmu_private >> sb->s_blocksize_bits) {
fat_fs_panic(sb, "corrupted file size (i_pos %lld, %lld)",
- MSDOS_I(inode)->i_pos, MSDOS_I(inode)->mmu_private);
+ MSDOS_I(inode)->i_pos, MSDOS_I(inode)->mmu_private);
return -EIO;
}
@@ -93,32 +93,27 @@
err = fat_bmap(inode, iblock, &phys, &mapped_blocks);
if (err)
return err;
+
BUG_ON(!phys);
BUG_ON(*max_blocks != mapped_blocks);
set_buffer_new(bh_result);
map_bh(bh_result, sb, phys);
- return 0;
-}
-static int fat_get_blocks(struct inode *inode, sector_t iblock,
- struct buffer_head *bh_result, int create)
-{
- struct super_block *sb = inode->i_sb;
- int err;
- unsigned long max_blocks = bh_result->b_size >> inode->i_blkbits;
-
- err = __fat_get_blocks(inode, iblock, &max_blocks, bh_result, create);
- if (err)
- return err;
- bh_result->b_size = max_blocks << sb->s_blocksize_bits;
return 0;
}
static int fat_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
- unsigned long max_blocks = 1;
- return __fat_get_blocks(inode, iblock, &max_blocks, bh_result, create);
+ struct super_block *sb = inode->i_sb;
+ unsigned long max_blocks = bh_result->b_size >> inode->i_blkbits;
+ int err;
+
+ err = __fat_get_block(inode, iblock, &max_blocks, bh_result, create);
+ if (err)
+ return err;
+ bh_result->b_size = max_blocks << sb->s_blocksize_bits;
+ return 0;
}
static int fat_writepage(struct page *page, struct writeback_control *wbc)
@@ -188,7 +183,7 @@
* condition of fat_get_block() and ->truncate().
*/
return blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
- offset, nr_segs, fat_get_blocks, NULL);
+ offset, nr_segs, fat_get_block, NULL);
}
static sector_t _fat_bmap(struct address_space *mapping, sector_t block)
@@ -375,8 +370,6 @@
inode->i_flags |= S_IMMUTABLE;
}
MSDOS_I(inode)->i_attrs = de->attr & ATTR_UNUSED;
- /* this is as close to the truth as we can get ... */
- inode->i_blksize = sbi->cluster_size;
inode->i_blocks = ((inode->i_size + (sbi->cluster_size - 1))
& ~((loff_t)sbi->cluster_size - 1)) >> 9;
inode->i_mtime.tv_sec =
@@ -528,8 +521,7 @@
static void __exit fat_destroy_inodecache(void)
{
- if (kmem_cache_destroy(fat_inode_cachep))
- printk(KERN_INFO "fat_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(fat_inode_cachep);
}
static int fat_remount(struct super_block *sb, int *flags, char *data)
@@ -1137,7 +1129,6 @@
MSDOS_I(inode)->i_start = 0;
inode->i_size = sbi->dir_entries * sizeof(struct msdos_dir_entry);
}
- inode->i_blksize = sbi->cluster_size;
inode->i_blocks = ((inode->i_size + (sbi->cluster_size - 1))
& ~((loff_t)sbi->cluster_size - 1)) >> 9;
MSDOS_I(inode)->i_logstart = 0;
@@ -1168,11 +1159,10 @@
long error;
char buf[50];
- sbi = kmalloc(sizeof(struct msdos_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct msdos_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sb->s_fs_info = sbi;
- memset(sbi, 0, sizeof(struct msdos_sb_info));
sb->s_flags |= MS_NODIRATIME;
sb->s_magic = MSDOS_SUPER_MAGIC;
diff --git a/fs/file.c b/fs/file.c
index b3c6b82..8d3bfca 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -281,10 +281,8 @@
out2:
nfds = fdt->max_fdset;
out:
- if (new_openset)
- free_fdset(new_openset, nfds);
- if (new_execset)
- free_fdset(new_execset, nfds);
+ free_fdset(new_openset, nfds);
+ free_fdset(new_execset, nfds);
kfree(fdt);
return NULL;
}
diff --git a/fs/file_table.c b/fs/file_table.c
index 0131ba0..bc35a40 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -169,7 +169,7 @@
if (file->f_op && file->f_op->release)
file->f_op->release(inode, file);
security_file_free(file);
- if (unlikely(inode->i_cdev != NULL))
+ if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL))
cdev_put(inode->i_cdev);
fops_put(file->f_op);
if (file->f_mode & FMODE_WRITE)
diff --git a/fs/freevxfs/vxfs.h b/fs/freevxfs/vxfs.h
index d35979a..c8a9265 100644
--- a/fs/freevxfs/vxfs.h
+++ b/fs/freevxfs/vxfs.h
@@ -252,7 +252,7 @@
* Get filesystem private data from VFS inode.
*/
#define VXFS_INO(ip) \
- ((struct vxfs_inode_info *)(ip)->u.generic_ip)
+ ((struct vxfs_inode_info *)(ip)->i_private)
/*
* Get filesystem private data from VFS superblock.
diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c
index ca6a397..4786d51 100644
--- a/fs/freevxfs/vxfs_inode.c
+++ b/fs/freevxfs/vxfs_inode.c
@@ -239,11 +239,10 @@
ip->i_ctime.tv_nsec = 0;
ip->i_mtime.tv_nsec = 0;
- ip->i_blksize = PAGE_SIZE;
ip->i_blocks = vip->vii_blocks;
ip->i_generation = vip->vii_gen;
- ip->u.generic_ip = (void *)vip;
+ ip->i_private = vip;
}
@@ -338,5 +337,5 @@
void
vxfs_clear_inode(struct inode *ip)
{
- kmem_cache_free(vxfs_inode_cachep, ip->u.generic_ip);
+ kmem_cache_free(vxfs_inode_cachep, ip->i_private);
}
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 46fe60b..79ec1f2 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -23,7 +23,7 @@
{
struct fuse_conn *fc;
mutex_lock(&fuse_mutex);
- fc = file->f_dentry->d_inode->u.generic_ip;
+ fc = file->f_dentry->d_inode->i_private;
if (fc)
fc = fuse_conn_get(fc);
mutex_unlock(&fuse_mutex);
@@ -98,7 +98,7 @@
inode->i_op = iop;
inode->i_fop = fop;
inode->i_nlink = nlink;
- inode->u.generic_ip = fc;
+ inode->i_private = fc;
d_add(dentry, inode);
return dentry;
}
@@ -150,7 +150,7 @@
for (i = fc->ctl_ndents - 1; i >= 0; i--) {
struct dentry *dentry = fc->ctl_dentry[i];
- dentry->d_inode->u.generic_ip = NULL;
+ dentry->d_inode->i_private = NULL;
d_drop(dentry);
dput(dentry);
}
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 7d25092..cb7cadb 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -118,7 +118,6 @@
inode->i_uid = attr->uid;
inode->i_gid = attr->gid;
i_size_write(inode, attr->size);
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = attr->blocks;
inode->i_atime.tv_sec = attr->atime;
inode->i_atime.tv_nsec = attr->atimensec;
diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c
index 13231dd..0d20006 100644
--- a/fs/hfs/bnode.c
+++ b/fs/hfs/bnode.c
@@ -249,10 +249,9 @@
sb = tree->inode->i_sb;
size = sizeof(struct hfs_bnode) + tree->pages_per_bnode *
sizeof(struct page *);
- node = kmalloc(size, GFP_KERNEL);
+ node = kzalloc(size, GFP_KERNEL);
if (!node)
return NULL;
- memset(node, 0, size);
node->tree = tree;
node->this = cnid;
set_bit(HFS_BNODE_NEW, &node->flags);
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 4003579..5fd0ed7 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -21,10 +21,9 @@
struct page *page;
unsigned int size;
- tree = kmalloc(sizeof(*tree), GFP_KERNEL);
+ tree = kzalloc(sizeof(*tree), GFP_KERNEL);
if (!tree)
return NULL;
- memset(tree, 0, sizeof(*tree));
init_MUTEX(&tree->tree_lock);
spin_lock_init(&tree->hash_lock);
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 315cf44..d05641c 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -154,7 +154,6 @@
inode->i_gid = current->fsgid;
inode->i_nlink = 1;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
- inode->i_blksize = HFS_SB(sb)->alloc_blksz;
HFS_I(inode)->flags = 0;
HFS_I(inode)->rsrc_inode = NULL;
HFS_I(inode)->fs_blocks = 0;
@@ -284,7 +283,6 @@
inode->i_uid = hsb->s_uid;
inode->i_gid = hsb->s_gid;
inode->i_nlink = 1;
- inode->i_blksize = HFS_SB(inode->i_sb)->alloc_blksz;
if (idata->key)
HFS_I(inode)->cat_key = *idata->key;
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 34937ee..d43b4fc 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -356,11 +356,10 @@
struct inode *root_inode;
int res;
- sbi = kmalloc(sizeof(struct hfs_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct hfs_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sb->s_fs_info = sbi;
- memset(sbi, 0, sizeof(struct hfs_sb_info));
INIT_HLIST_HEAD(&sbi->rsrc_inodes);
res = -EINVAL;
@@ -455,8 +454,7 @@
static void __exit exit_hfs_fs(void)
{
unregister_filesystem(&hfs_fs_type);
- if (kmem_cache_destroy(hfs_inode_cachep))
- printk(KERN_ERR "hfs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(hfs_inode_cachep);
}
module_init(init_hfs_fs)
diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c
index 77bf434..29da657 100644
--- a/fs/hfsplus/bnode.c
+++ b/fs/hfsplus/bnode.c
@@ -409,10 +409,9 @@
sb = tree->inode->i_sb;
size = sizeof(struct hfs_bnode) + tree->pages_per_bnode *
sizeof(struct page *);
- node = kmalloc(size, GFP_KERNEL);
+ node = kzalloc(size, GFP_KERNEL);
if (!node)
return NULL;
- memset(node, 0, size);
node->tree = tree;
node->this = cnid;
set_bit(HFS_BNODE_NEW, &node->flags);
diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index cfc852f..a9b9e87 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -24,10 +24,9 @@
struct page *page;
unsigned int size;
- tree = kmalloc(sizeof(*tree), GFP_KERNEL);
+ tree = kzalloc(sizeof(*tree), GFP_KERNEL);
if (!tree)
return NULL;
- memset(tree, 0, sizeof(*tree));
init_MUTEX(&tree->tree_lock);
spin_lock_init(&tree->hash_lock);
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 924ecde..0eb1a60 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -304,7 +304,6 @@
inode->i_gid = current->fsgid;
inode->i_nlink = 1;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
- inode->i_blksize = HFSPLUS_SB(sb).alloc_blksz;
INIT_LIST_HEAD(&HFSPLUS_I(inode).open_dir_list);
init_MUTEX(&HFSPLUS_I(inode).extents_lock);
atomic_set(&HFSPLUS_I(inode).opencnt, 0);
@@ -407,7 +406,6 @@
type = hfs_bnode_read_u16(fd->bnode, fd->entryoffset);
HFSPLUS_I(inode).dev = 0;
- inode->i_blksize = HFSPLUS_SB(inode->i_sb).alloc_blksz;
if (type == HFSPLUS_FOLDER) {
struct hfsplus_cat_folder *folder = &entry.folder;
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index d279d59..194eede 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -493,8 +493,7 @@
static void __exit exit_hfsplus_fs(void)
{
unregister_filesystem(&hfsplus_fs_type);
- if (kmem_cache_destroy(hfsplus_inode_cachep))
- printk(KERN_ERR "hfsplus_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(hfsplus_inode_cachep);
}
module_init(init_hfsplus_fs)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index b82e3d9..322e876 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -156,7 +156,6 @@
ino->i_mode = i_mode;
ino->i_nlink = i_nlink;
ino->i_size = i_size;
- ino->i_blksize = i_blksize;
ino->i_blocks = i_blocks;
return(0);
}
diff --git a/fs/hpfs/buffer.c b/fs/hpfs/buffer.c
index 2807aa8..b52b738 100644
--- a/fs/hpfs/buffer.c
+++ b/fs/hpfs/buffer.c
@@ -76,7 +76,7 @@
return NULL;
}
- qbh->data = data = (char *)kmalloc(2048, GFP_NOFS);
+ qbh->data = data = kmalloc(2048, GFP_NOFS);
if (!data) {
printk("HPFS: hpfs_map_4sectors: out of memory\n");
goto bail;
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 56f2c33..bcf6ee3 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -17,7 +17,6 @@
i->i_gid = hpfs_sb(sb)->sb_gid;
i->i_mode = hpfs_sb(sb)->sb_mode;
hpfs_inode->i_conv = hpfs_sb(sb)->sb_conv;
- i->i_blksize = 512;
i->i_size = -1;
i->i_blocks = -1;
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index 8fe51c3..450b5e0 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -203,8 +203,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(hpfs_inode_cachep))
- printk(KERN_INFO "hpfs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(hpfs_inode_cachep);
}
/*
@@ -462,11 +461,10 @@
int o;
- sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
+ sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
s->s_fs_info = sbi;
- memset(sbi, 0, sizeof(*sbi));
sbi->sb_bmp_dir = NULL;
sbi->sb_cp_table = NULL;
diff --git a/fs/hppfs/hppfs_kern.c b/fs/hppfs/hppfs_kern.c
index 3a9bdf58..dcb6d2e 100644
--- a/fs/hppfs/hppfs_kern.c
+++ b/fs/hppfs/hppfs_kern.c
@@ -152,7 +152,6 @@
ino->i_mode = proc_ino->i_mode;
ino->i_nlink = proc_ino->i_nlink;
ino->i_size = proc_ino->i_size;
- ino->i_blksize = proc_ino->i_blksize;
ino->i_blocks = proc_ino->i_blocks;
}
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index c3920c9..e025a31 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -357,7 +357,6 @@
inode->i_mode = mode;
inode->i_uid = uid;
inode->i_gid = gid;
- inode->i_blksize = HPAGE_SIZE;
inode->i_blocks = 0;
inode->i_mapping->a_ops = &hugetlbfs_aops;
inode->i_mapping->backing_dev_info =&hugetlbfs_backing_dev_info;
diff --git a/fs/inode.c b/fs/inode.c
index 0bf9f04..f5c04dd 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -163,7 +163,7 @@
bdi = sb->s_bdev->bd_inode->i_mapping->backing_dev_info;
mapping->backing_dev_info = bdi;
}
- memset(&inode->u, 0, sizeof(inode->u));
+ inode->i_private = 0;
inode->i_mapping = mapping;
}
return inode;
@@ -254,9 +254,9 @@
DQUOT_DROP(inode);
if (inode->i_sb && inode->i_sb->s_op->clear_inode)
inode->i_sb->s_op->clear_inode(inode);
- if (inode->i_bdev)
+ if (S_ISBLK(inode->i_mode) && inode->i_bdev)
bd_forget(inode);
- if (inode->i_cdev)
+ if (S_ISCHR(inode->i_mode) && inode->i_cdev)
cd_forget(inode);
inode->i_state = I_CLEAR;
}
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 1439136..4527692 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -96,9 +96,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(isofs_inode_cachep))
- printk(KERN_INFO "iso_inode_cache: not all structures were "
- "freed\n");
+ kmem_cache_destroy(isofs_inode_cachep);
}
static int isofs_remount(struct super_block *sb, int *flags, char *data)
@@ -557,11 +555,10 @@
struct iso9660_options opt;
struct isofs_sb_info * sbi;
- sbi = kmalloc(sizeof(*sbi), GFP_KERNEL);
+ sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
s->s_fs_info = sbi;
- memset(sbi, 0, sizeof(*sbi));
if (!parse_options((char *)data, &opt))
goto out_freesbi;
@@ -1238,7 +1235,7 @@
}
inode->i_uid = sbi->s_uid;
inode->i_gid = sbi->s_gid;
- inode->i_blocks = inode->i_blksize = 0;
+ inode->i_blocks = 0;
ei->i_format_parm[0] = 0;
ei->i_format_parm[1] = 0;
@@ -1294,7 +1291,6 @@
isonum_711 (de->ext_attr_length));
/* Set the number of blocks for stat() - should be done before RR */
- inode->i_blksize = PAGE_CACHE_SIZE; /* For stat() only */
inode->i_blocks = (inode->i_size + 511) >> 9;
/*
diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index 47678a2..0208cc7 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -1,6 +1,6 @@
/*
* linux/fs/checkpoint.c
- *
+ *
* Written by Stephen C. Tweedie <sct@redhat.com>, 1999
*
* Copyright 1999 Red Hat Software --- All Rights Reserved
@@ -9,8 +9,8 @@
* the terms of the GNU General Public License, version 2, or at your
* option, any later version, incorporated herein by reference.
*
- * Checkpoint routines for the generic filesystem journaling code.
- * Part of the ext2fs journaling system.
+ * Checkpoint routines for the generic filesystem journaling code.
+ * Part of the ext2fs journaling system.
*
* Checkpointing is the process of ensuring that a section of the log is
* committed fully to disk, so that that portion of the log can be
@@ -145,6 +145,7 @@
* jbd_unlock_bh_state().
*/
static void jbd_sync_bh(journal_t *journal, struct buffer_head *bh)
+ __releases(journal->j_list_lock)
{
get_bh(bh);
spin_unlock(&journal->j_list_lock);
@@ -225,7 +226,7 @@
* Try to flush one buffer from the checkpoint list to disk.
*
* Return 1 if something happened which requires us to abort the current
- * scan of the checkpoint list.
+ * scan of the checkpoint list.
*
* Called with j_list_lock held and drops it if 1 is returned
* Called under jbd_lock_bh_state(jh2bh(jh)), and drops it
@@ -269,7 +270,7 @@
* possibly block, while still holding the journal lock.
* We cannot afford to let the transaction logic start
* messing around with this buffer before we write it to
- * disk, as that would break recoverability.
+ * disk, as that would break recoverability.
*/
BUFFER_TRACE(bh, "queue");
get_bh(bh);
@@ -292,7 +293,7 @@
* Perform an actual checkpoint. We take the first transaction on the
* list of transactions to be checkpointed and send all its buffers
* to disk. We submit larger chunks of data at once.
- *
+ *
* The journal should be locked before calling this function.
*/
int log_do_checkpoint(journal_t *journal)
@@ -303,10 +304,10 @@
jbd_debug(1, "Start checkpoint\n");
- /*
+ /*
* First thing: if there are any transactions in the log which
* don't need checkpointing, just eliminate them from the
- * journal straight away.
+ * journal straight away.
*/
result = cleanup_journal_tail(journal);
jbd_debug(1, "cleanup_journal_tail returned %d\n", result);
@@ -384,9 +385,9 @@
* we have already got rid of any since the last update of the log tail
* in the journal superblock. If so, we can instantly roll the
* superblock forward to remove those transactions from the log.
- *
+ *
* Return <0 on error, 0 on success, 1 if there was nothing to clean up.
- *
+ *
* Called with the journal lock held.
*
* This is the only part of the journaling code which really needs to be
@@ -403,8 +404,8 @@
unsigned long blocknr, freed;
/* OK, work out the oldest transaction remaining in the log, and
- * the log block it starts at.
- *
+ * the log block it starts at.
+ *
* If the log is now empty, we need to work out which is the
* next transaction ID we will write, and where it will
* start. */
@@ -479,7 +480,7 @@
if (!jh)
return 0;
- last_jh = jh->b_cpprev;
+ last_jh = jh->b_cpprev;
do {
jh = next_jh;
next_jh = jh->b_cpnext;
@@ -557,7 +558,7 @@
return ret;
}
-/*
+/*
* journal_remove_checkpoint: called after a buffer has been committed
* to disk (either by being write-back flushed to disk, or being
* committed to the log).
@@ -635,7 +636,7 @@
* Called with the journal locked.
* Called with j_list_lock held.
*/
-void __journal_insert_checkpoint(struct journal_head *jh,
+void __journal_insert_checkpoint(struct journal_head *jh,
transaction_t *transaction)
{
JBUFFER_TRACE(jh, "entry");
@@ -657,7 +658,7 @@
/*
* We've finished with this transaction structure: adios...
- *
+ *
* The transaction must have no links except for the checkpoint by this
* point.
*
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index f66724c..2fc66c3 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -181,7 +181,7 @@
transaction->t_expires))
should_sleep = 0;
if (journal->j_flags & JFS_UNMOUNT)
- should_sleep = 0;
+ should_sleep = 0;
if (should_sleep) {
spin_unlock(&journal->j_state_lock);
schedule();
@@ -271,7 +271,7 @@
int journal_write_metadata_buffer(transaction_t *transaction,
struct journal_head *jh_in,
struct journal_head **jh_out,
- int blocknr)
+ unsigned long blocknr)
{
int need_copy_out = 0;
int done_copy_out = 0;
@@ -578,7 +578,7 @@
* this is a no-op. If needed, we can use j_blk_offset - everything is
* ready.
*/
-int journal_bmap(journal_t *journal, unsigned long blocknr,
+int journal_bmap(journal_t *journal, unsigned long blocknr,
unsigned long *retp)
{
int err = 0;
@@ -696,13 +696,13 @@
* @bdev: Block device on which to create the journal
* @fs_dev: Device which hold journalled filesystem for this journal.
* @start: Block nr Start of journal.
- * @len: Lenght of the journal in blocks.
+ * @len: Length of the journal in blocks.
* @blocksize: blocksize of journalling device
* @returns: a newly created journal_t *
- *
+ *
* journal_init_dev creates a journal which maps a fixed contiguous
* range of blocks on an arbitrary block device.
- *
+ *
*/
journal_t * journal_init_dev(struct block_device *bdev,
struct block_device *fs_dev,
@@ -739,11 +739,11 @@
return journal;
}
-
-/**
+
+/**
* journal_t * journal_init_inode () - creates a journal which maps to a inode.
* @inode: An inode to create the journal in
- *
+ *
* journal_init_inode creates a journal which maps an on-disk inode as
* the journal. The inode must exist already, must support bmap() and
* must have all data blocks preallocated.
@@ -763,7 +763,7 @@
journal->j_inode = inode;
jbd_debug(1,
"journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n",
- journal, inode->i_sb->s_id, inode->i_ino,
+ journal, inode->i_sb->s_id, inode->i_ino,
(long long) inode->i_size,
inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize);
@@ -798,10 +798,10 @@
return journal;
}
-/*
+/*
* If the journal init or create aborts, we need to mark the journal
* superblock as being NULL to prevent the journal destroy from writing
- * back a bogus superblock.
+ * back a bogus superblock.
*/
static void journal_fail_superblock (journal_t *journal)
{
@@ -820,7 +820,7 @@
static int journal_reset(journal_t *journal)
{
journal_superblock_t *sb = journal->j_superblock;
- unsigned int first, last;
+ unsigned long first, last;
first = be32_to_cpu(sb->s_first);
last = be32_to_cpu(sb->s_maxlen);
@@ -844,13 +844,13 @@
return 0;
}
-/**
+/**
* int journal_create() - Initialise the new journal file
* @journal: Journal to create. This structure must have been initialised
- *
+ *
* Given a journal_t structure which tells us which disk blocks we can
* use, create a new journal superblock and initialise all of the
- * journal fields from scratch.
+ * journal fields from scratch.
**/
int journal_create(journal_t *journal)
{
@@ -915,7 +915,7 @@
return journal_reset(journal);
}
-/**
+/**
* void journal_update_superblock() - Update journal sb on disk.
* @journal: The journal to update.
* @wait: Set to '0' if you don't want to wait for IO completion.
@@ -939,7 +939,7 @@
journal->j_transaction_sequence) {
jbd_debug(1,"JBD: Skipping superblock update on recovered sb "
"(start %ld, seq %d, errno %d)\n",
- journal->j_tail, journal->j_tail_sequence,
+ journal->j_tail, journal->j_tail_sequence,
journal->j_errno);
goto out;
}
@@ -1062,7 +1062,7 @@
/**
* int journal_load() - Read journal from disk.
* @journal: Journal to act on.
- *
+ *
* Given a journal_t structure which tells us which disk blocks contain
* a journal, read the journal from disk to initialise the in-memory
* structures.
@@ -1094,7 +1094,7 @@
/*
* Create a slab for this blocksize
*/
- err = journal_create_jbd_slab(cpu_to_be32(sb->s_blocksize));
+ err = journal_create_jbd_slab(be32_to_cpu(sb->s_blocksize));
if (err)
return err;
@@ -1172,9 +1172,9 @@
* @compat: bitmask of compatible features
* @ro: bitmask of features that force read-only mount
* @incompat: bitmask of incompatible features
- *
+ *
* Check whether the journal uses all of a given set of
- * features. Return true (non-zero) if it does.
+ * features. Return true (non-zero) if it does.
**/
int journal_check_used_features (journal_t *journal, unsigned long compat,
@@ -1203,7 +1203,7 @@
* @compat: bitmask of compatible features
* @ro: bitmask of features that force read-only mount
* @incompat: bitmask of incompatible features
- *
+ *
* Check whether the journaling code supports the use of
* all of a given set of features on this journal. Return true
* (non-zero) if it can. */
@@ -1241,7 +1241,7 @@
* @incompat: bitmask of incompatible features
*
* Mark a given journal feature as present on the
- * superblock. Returns true if the requested features could be set.
+ * superblock. Returns true if the requested features could be set.
*
*/
@@ -1327,7 +1327,7 @@
/**
* int journal_flush () - Flush journal
* @journal: Journal to act on.
- *
+ *
* Flush all data for a given journal to disk and empty the journal.
* Filesystems can use this when remounting readonly to ensure that
* recovery does not need to happen on remount.
@@ -1394,7 +1394,7 @@
* int journal_wipe() - Wipe journal contents
* @journal: Journal to act on.
* @write: flag (see below)
- *
+ *
* Wipe out all of the contents of a journal, safely. This will produce
* a warning if the journal contains any valid recovery information.
* Must be called between journal_init_*() and journal_load().
@@ -1449,7 +1449,7 @@
/*
* Journal abort has very specific semantics, which we describe
- * for journal abort.
+ * for journal abort.
*
* Two internal function, which provide abort to te jbd layer
* itself are here.
@@ -1504,7 +1504,7 @@
* Perform a complete, immediate shutdown of the ENTIRE
* journal (not of a single transaction). This operation cannot be
* undone without closing and reopening the journal.
- *
+ *
* The journal_abort function is intended to support higher level error
* recovery mechanisms such as the ext2/ext3 remount-readonly error
* mode.
@@ -1538,7 +1538,7 @@
* supply an errno; a null errno implies that absolutely no further
* writes are done to the journal (unless there are any already in
* progress).
- *
+ *
*/
void journal_abort(journal_t *journal, int errno)
@@ -1546,7 +1546,7 @@
__journal_abort_soft(journal, errno);
}
-/**
+/**
* int journal_errno () - returns the journal's error state.
* @journal: journal to examine.
*
@@ -1570,7 +1570,7 @@
return err;
}
-/**
+/**
* int journal_clear_err () - clears the journal's error state
* @journal: journal to act on.
*
@@ -1590,7 +1590,7 @@
return err;
}
-/**
+/**
* void journal_ack_err() - Ack journal err.
* @journal: journal to act on.
*
@@ -1612,7 +1612,7 @@
/*
* Simple support for retrying memory allocations. Introduced to help to
- * debug different VM deadlock avoidance strategies.
+ * debug different VM deadlock avoidance strategies.
*/
void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry)
{
@@ -2047,13 +2047,7 @@
{
int ret;
-/* Static check for data structure consistency. There's no code
- * invoked --- we'll just get a linker failure if things aren't right.
- */
- extern void journal_bad_superblock_size(void);
- if (sizeof(struct journal_superblock_s) != 1024)
- journal_bad_superblock_size();
-
+ BUILD_BUG_ON(sizeof(struct journal_superblock_s) != 1024);
ret = journal_init_caches();
if (ret != 0)
diff --git a/fs/jbd/recovery.c b/fs/jbd/recovery.c
index de5bafb4e..445eed6 100644
--- a/fs/jbd/recovery.c
+++ b/fs/jbd/recovery.c
@@ -1,6 +1,6 @@
/*
* linux/fs/recovery.c
- *
+ *
* Written by Stephen C. Tweedie <sct@redhat.com>, 1999
*
* Copyright 1999-2000 Red Hat Software --- All Rights Reserved
@@ -10,7 +10,7 @@
* option, any later version, incorporated herein by reference.
*
* Journal recovery routines for the generic filesystem journaling code;
- * part of the ext2fs journaling system.
+ * part of the ext2fs journaling system.
*/
#ifndef __KERNEL__
@@ -25,9 +25,9 @@
/*
* Maintain information about the progress of the recovery job, so that
- * the different passes can carry information between them.
+ * the different passes can carry information between them.
*/
-struct recovery_info
+struct recovery_info
{
tid_t start_transaction;
tid_t end_transaction;
@@ -116,7 +116,7 @@
err = 0;
failed:
- if (nbufs)
+ if (nbufs)
journal_brelse_array(bufs, nbufs);
return err;
}
@@ -128,7 +128,7 @@
* Read a block from the journal
*/
-static int jread(struct buffer_head **bhp, journal_t *journal,
+static int jread(struct buffer_head **bhp, journal_t *journal,
unsigned int offset)
{
int err;
@@ -212,14 +212,14 @@
/**
* journal_recover - recovers a on-disk journal
* @journal: the journal to recover
- *
+ *
* The primary function for recovering the log contents when mounting a
- * journaled device.
+ * journaled device.
*
* Recovery is done in three passes. In the first pass, we look for the
* end of the log. In the second, we assemble the list of revoke
* blocks. In the third and final pass, we replay any un-revoked blocks
- * in the log.
+ * in the log.
*/
int journal_recover(journal_t *journal)
{
@@ -231,10 +231,10 @@
memset(&info, 0, sizeof(info));
sb = journal->j_superblock;
- /*
+ /*
* The journal superblock's s_start field (the current log head)
* is always zero if, and only if, the journal was cleanly
- * unmounted.
+ * unmounted.
*/
if (!sb->s_start) {
@@ -253,7 +253,7 @@
jbd_debug(0, "JBD: recovery, exit status %d, "
"recovered transactions %u to %u\n",
err, info.start_transaction, info.end_transaction);
- jbd_debug(0, "JBD: Replayed %d and revoked %d/%d blocks\n",
+ jbd_debug(0, "JBD: Replayed %d and revoked %d/%d blocks\n",
info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
/* Restart the log at the next transaction ID, thus invalidating
@@ -268,15 +268,15 @@
/**
* journal_skip_recovery - Start journal and wipe exiting records
* @journal: journal to startup
- *
+ *
* Locate any valid recovery information from the journal and set up the
* journal structures in memory to ignore it (presumably because the
- * caller has evidence that it is out of date).
+ * caller has evidence that it is out of date).
* This function does'nt appear to be exorted..
*
* We perform one pass over the journal to allow us to tell the user how
* much recovery information is being erased, and to let us initialise
- * the journal transaction sequence numbers to the next unused ID.
+ * the journal transaction sequence numbers to the next unused ID.
*/
int journal_skip_recovery(journal_t *journal)
{
@@ -297,7 +297,7 @@
#ifdef CONFIG_JBD_DEBUG
int dropped = info.end_transaction - be32_to_cpu(sb->s_sequence);
#endif
- jbd_debug(0,
+ jbd_debug(0,
"JBD: ignoring %d transaction%s from the journal.\n",
dropped, (dropped == 1) ? "" : "s");
journal->j_transaction_sequence = ++info.end_transaction;
@@ -314,7 +314,7 @@
unsigned long next_log_block;
int err, success = 0;
journal_superblock_t * sb;
- journal_header_t * tmp;
+ journal_header_t * tmp;
struct buffer_head * bh;
unsigned int sequence;
int blocktype;
@@ -324,10 +324,10 @@
MAX_BLOCKS_PER_DESC = ((journal->j_blocksize-sizeof(journal_header_t))
/ sizeof(journal_block_tag_t));
- /*
+ /*
* First thing is to establish what we expect to find in the log
* (in terms of transaction IDs), and where (in terms of log
- * block offsets): query the superblock.
+ * block offsets): query the superblock.
*/
sb = journal->j_superblock;
@@ -344,7 +344,7 @@
* Now we walk through the log, transaction by transaction,
* making sure that each transaction has a commit block in the
* expected place. Each complete transaction gets replayed back
- * into the main filesystem.
+ * into the main filesystem.
*/
while (1) {
@@ -379,8 +379,8 @@
next_log_block++;
wrap(journal, next_log_block);
- /* What kind of buffer is it?
- *
+ /* What kind of buffer is it?
+ *
* If it is a descriptor block, check that it has the
* expected sequence number. Otherwise, we're all done
* here. */
@@ -394,7 +394,7 @@
blocktype = be32_to_cpu(tmp->h_blocktype);
sequence = be32_to_cpu(tmp->h_sequence);
- jbd_debug(3, "Found magic %d, sequence %d\n",
+ jbd_debug(3, "Found magic %d, sequence %d\n",
blocktype, sequence);
if (sequence != next_commit_ID) {
@@ -438,7 +438,7 @@
/* Recover what we can, but
* report failure at the end. */
success = err;
- printk (KERN_ERR
+ printk (KERN_ERR
"JBD: IO error %d recovering "
"block %ld in log\n",
err, io_block);
@@ -452,7 +452,7 @@
* revoked, then we're all done
* here. */
if (journal_test_revoke
- (journal, blocknr,
+ (journal, blocknr,
next_commit_ID)) {
brelse(obh);
++info->nr_revoke_hits;
@@ -465,7 +465,7 @@
blocknr,
journal->j_blocksize);
if (nbh == NULL) {
- printk(KERN_ERR
+ printk(KERN_ERR
"JBD: Out of memory "
"during recovery.\n");
err = -ENOMEM;
@@ -537,7 +537,7 @@
}
done:
- /*
+ /*
* We broke out of the log scan loop: either we came to the
* known end of the log or we found an unexpected block in the
* log. If the latter happened, then we know that the "current"
@@ -567,7 +567,7 @@
/* Scan a revoke record, marking all blocks mentioned as revoked. */
-static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
+static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
tid_t sequence, struct recovery_info *info)
{
journal_revoke_header_t *header;
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index a561441..c532429 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -1,6 +1,6 @@
/*
* linux/fs/revoke.c
- *
+ *
* Written by Stephen C. Tweedie <sct@redhat.com>, 2000
*
* Copyright 2000 Red Hat corp --- All Rights Reserved
@@ -15,10 +15,10 @@
* Revoke is the mechanism used to prevent old log records for deleted
* metadata from being replayed on top of newer data using the same
* blocks. The revoke mechanism is used in two separate places:
- *
+ *
* + Commit: during commit we write the entire list of the current
* transaction's revoked blocks to the journal
- *
+ *
* + Recovery: during recovery we record the transaction ID of all
* revoked blocks. If there are multiple revoke records in the log
* for a single block, only the last one counts, and if there is a log
@@ -29,7 +29,7 @@
* single transaction:
*
* Block is revoked and then journaled:
- * The desired end result is the journaling of the new block, so we
+ * The desired end result is the journaling of the new block, so we
* cancel the revoke before the transaction commits.
*
* Block is journaled and then revoked:
@@ -41,7 +41,7 @@
* transaction must have happened after the block was journaled and so
* the revoke must take precedence.
*
- * Block is revoked and then written as data:
+ * Block is revoked and then written as data:
* The data write is allowed to succeed, but the revoke is _not_
* cancelled. We still need to prevent old log records from
* overwriting the new data. We don't even need to clear the revoke
@@ -54,7 +54,7 @@
* buffer has not been revoked, and cancel_revoke
* need do nothing.
* RevokeValid set, Revoked set:
- * buffer has been revoked.
+ * buffer has been revoked.
*/
#ifndef __KERNEL__
@@ -77,7 +77,7 @@
journal replay, this involves recording the transaction ID of the
last transaction to revoke this block. */
-struct jbd_revoke_record_s
+struct jbd_revoke_record_s
{
struct list_head hash;
tid_t sequence; /* Used for recovery only */
@@ -90,8 +90,8 @@
{
/* It is conceivable that we might want a larger hash table
* for recovery. Must be a power of two. */
- int hash_size;
- int hash_shift;
+ int hash_size;
+ int hash_shift;
struct list_head *hash_table;
};
@@ -301,22 +301,22 @@
#ifdef __KERNEL__
-/*
+/*
* journal_revoke: revoke a given buffer_head from the journal. This
* prevents the block from being replayed during recovery if we take a
* crash after this current transaction commits. Any subsequent
* metadata writes of the buffer in this transaction cancel the
- * revoke.
+ * revoke.
*
* Note that this call may block --- it is up to the caller to make
* sure that there are no further calls to journal_write_metadata
* before the revoke is complete. In ext3, this implies calling the
* revoke before clearing the block bitmap when we are deleting
- * metadata.
+ * metadata.
*
* Revoke performs a journal_forget on any buffer_head passed in as a
* parameter, but does _not_ forget the buffer_head if the bh was only
- * found implicitly.
+ * found implicitly.
*
* bh_in may not be a journalled buffer - it may have come off
* the hash tables without an attached journal_head.
@@ -325,7 +325,7 @@
* by one.
*/
-int journal_revoke(handle_t *handle, unsigned long blocknr,
+int journal_revoke(handle_t *handle, unsigned long blocknr,
struct buffer_head *bh_in)
{
struct buffer_head *bh = NULL;
@@ -487,7 +487,7 @@
else
journal->j_revoke = journal->j_revoke_table[0];
- for (i = 0; i < journal->j_revoke->hash_size; i++)
+ for (i = 0; i < journal->j_revoke->hash_size; i++)
INIT_LIST_HEAD(&journal->j_revoke->hash_table[i]);
}
@@ -498,7 +498,7 @@
* Called with the journal lock held.
*/
-void journal_write_revoke_records(journal_t *journal,
+void journal_write_revoke_records(journal_t *journal,
transaction_t *transaction)
{
struct journal_head *descriptor;
@@ -507,7 +507,7 @@
struct list_head *hash_list;
int i, offset, count;
- descriptor = NULL;
+ descriptor = NULL;
offset = 0;
count = 0;
@@ -519,10 +519,10 @@
hash_list = &revoke->hash_table[i];
while (!list_empty(hash_list)) {
- record = (struct jbd_revoke_record_s *)
+ record = (struct jbd_revoke_record_s *)
hash_list->next;
write_one_revoke_record(journal, transaction,
- &descriptor, &offset,
+ &descriptor, &offset,
record);
count++;
list_del(&record->hash);
@@ -534,14 +534,14 @@
jbd_debug(1, "Wrote %d revoke records\n", count);
}
-/*
+/*
* Write out one revoke record. We need to create a new descriptor
- * block if the old one is full or if we have not already created one.
+ * block if the old one is full or if we have not already created one.
*/
-static void write_one_revoke_record(journal_t *journal,
+static void write_one_revoke_record(journal_t *journal,
transaction_t *transaction,
- struct journal_head **descriptorp,
+ struct journal_head **descriptorp,
int *offsetp,
struct jbd_revoke_record_s *record)
{
@@ -584,21 +584,21 @@
*descriptorp = descriptor;
}
- * ((__be32 *)(&jh2bh(descriptor)->b_data[offset])) =
+ * ((__be32 *)(&jh2bh(descriptor)->b_data[offset])) =
cpu_to_be32(record->blocknr);
offset += 4;
*offsetp = offset;
}
-/*
+/*
* Flush a revoke descriptor out to the journal. If we are aborting,
* this is a noop; otherwise we are generating a buffer which needs to
* be waited for during commit, so it has to go onto the appropriate
* journal buffer list.
*/
-static void flush_descriptor(journal_t *journal,
- struct journal_head *descriptor,
+static void flush_descriptor(journal_t *journal,
+ struct journal_head *descriptor,
int offset)
{
journal_revoke_header_t *header;
@@ -618,7 +618,7 @@
}
#endif
-/*
+/*
* Revoke support for recovery.
*
* Recovery needs to be able to:
@@ -629,7 +629,7 @@
* check whether a given block in a given transaction should be replayed
* (ie. has not been revoked by a revoke record in that or a subsequent
* transaction)
- *
+ *
* empty the revoke table after recovery.
*/
@@ -637,11 +637,11 @@
* First, setting revoke records. We create a new revoke record for
* every block ever revoked in the log as we scan it for recovery, and
* we update the existing records if we find multiple revokes for a
- * single block.
+ * single block.
*/
-int journal_set_revoke(journal_t *journal,
- unsigned long blocknr,
+int journal_set_revoke(journal_t *journal,
+ unsigned long blocknr,
tid_t sequence)
{
struct jbd_revoke_record_s *record;
@@ -653,18 +653,18 @@
if (tid_gt(sequence, record->sequence))
record->sequence = sequence;
return 0;
- }
+ }
return insert_revoke_hash(journal, blocknr, sequence);
}
-/*
+/*
* Test revoke records. For a given block referenced in the log, has
* that block been revoked? A revoke record with a given transaction
* sequence number revokes all blocks in that transaction and earlier
* ones, but later transactions still need replayed.
*/
-int journal_test_revoke(journal_t *journal,
+int journal_test_revoke(journal_t *journal,
unsigned long blocknr,
tid_t sequence)
{
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index f5169a9..e1b3c8a 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1,6 +1,6 @@
/*
* linux/fs/transaction.c
- *
+ *
* Written by Stephen C. Tweedie <sct@redhat.com>, 1998
*
* Copyright 1998 Red Hat corp --- All Rights Reserved
@@ -10,7 +10,7 @@
* option, any later version, incorporated herein by reference.
*
* Generic filesystem transaction handling code; part of the ext2fs
- * journaling system.
+ * journaling system.
*
* This file manages transactions (compound commits managed by the
* journaling code) and handles (individual atomic operations by the
@@ -74,7 +74,7 @@
* start_this_handle: Given a handle, deal with any locking or stalling
* needed to make sure that there is enough journal space for the handle
* to begin. Attach the handle to a transaction and set up the
- * transaction's buffer credits.
+ * transaction's buffer credits.
*/
static int start_this_handle(journal_t *journal, handle_t *handle)
@@ -117,7 +117,7 @@
if (is_journal_aborted(journal) ||
(journal->j_errno != 0 && !(journal->j_flags & JFS_ACK_ERR))) {
spin_unlock(&journal->j_state_lock);
- ret = -EROFS;
+ ret = -EROFS;
goto out;
}
@@ -182,7 +182,7 @@
goto repeat;
}
- /*
+ /*
* The commit code assumes that it can get enough log space
* without forcing a checkpoint. This is *critical* for
* correctness: a checkpoint of a buffer which is also
@@ -191,7 +191,7 @@
*
* We must therefore ensure the necessary space in the journal
* *before* starting to dirty potentially checkpointed buffers
- * in the new transaction.
+ * in the new transaction.
*
* The worst part is, any transaction currently committing can
* reduce the free space arbitrarily. Be careful to account for
@@ -246,13 +246,13 @@
}
/**
- * handle_t *journal_start() - Obtain a new handle.
+ * handle_t *journal_start() - Obtain a new handle.
* @journal: Journal to start transaction on.
* @nblocks: number of block buffer we might modify
*
* We make sure that the transaction can guarantee at least nblocks of
* modified buffers in the log. We block until the log can guarantee
- * that much space.
+ * that much space.
*
* This function is visible to journal users (like ext3fs), so is not
* called with the journal already locked.
@@ -292,11 +292,11 @@
* int journal_extend() - extend buffer credits.
* @handle: handle to 'extend'
* @nblocks: nr blocks to try to extend by.
- *
+ *
* Some transactions, such as large extends and truncates, can be done
* atomically all at once or in several stages. The operation requests
* a credit for a number of buffer modications in advance, but can
- * extend its credit if it needs more.
+ * extend its credit if it needs more.
*
* journal_extend tries to give the running handle more buffer credits.
* It does not guarantee that allocation - this is a best-effort only.
@@ -363,7 +363,7 @@
* int journal_restart() - restart a handle .
* @handle: handle to restart
* @nblocks: nr credits requested
- *
+ *
* Restart a handle for a multi-transaction filesystem
* operation.
*
@@ -462,7 +462,7 @@
/**
* void journal_unlock_updates (journal_t* journal) - release barrier
* @journal: Journal to release the barrier on.
- *
+ *
* Release a transaction barrier obtained with journal_lock_updates().
*
* Should be called without the journal lock held.
@@ -547,8 +547,8 @@
jbd_lock_bh_state(bh);
/* We now hold the buffer lock so it is safe to query the buffer
- * state. Is the buffer dirty?
- *
+ * state. Is the buffer dirty?
+ *
* If so, there are two possibilities. The buffer may be
* non-journaled, and undergoing a quite legitimate writeback.
* Otherwise, it is journaled, and we don't expect dirty buffers
@@ -566,7 +566,7 @@
*/
if (jh->b_transaction) {
J_ASSERT_JH(jh,
- jh->b_transaction == transaction ||
+ jh->b_transaction == transaction ||
jh->b_transaction ==
journal->j_committing_transaction);
if (jh->b_next_transaction)
@@ -580,7 +580,7 @@
*/
JBUFFER_TRACE(jh, "Unexpected dirty buffer");
jbd_unexpected_dirty_buffer(jh);
- }
+ }
unlock_buffer(bh);
@@ -653,7 +653,7 @@
* buffer had better remain locked during the kmalloc,
* but that should be true --- we hold the journal lock
* still and the buffer is already on the BUF_JOURNAL
- * list so won't be flushed.
+ * list so won't be flushed.
*
* Subtle point, though: if this is a get_undo_access,
* then we will be relying on the frozen_data to contain
@@ -765,8 +765,8 @@
* manually rather than reading off disk), then we need to keep the
* buffer_head locked until it has been completely filled with new
* data. In this case, we should be able to make the assertion that
- * the bh is not already part of an existing transaction.
- *
+ * the bh is not already part of an existing transaction.
+ *
* The buffer should already be locked by the caller by this point.
* There is no lock ranking violation: it was a newly created,
* unlocked buffer beforehand. */
@@ -778,7 +778,7 @@
*
* Call this if you create a new bh.
*/
-int journal_get_create_access(handle_t *handle, struct buffer_head *bh)
+int journal_get_create_access(handle_t *handle, struct buffer_head *bh)
{
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
@@ -847,13 +847,13 @@
* do not reuse freed space until the deallocation has been committed,
* since if we overwrote that space we would make the delete
* un-rewindable in case of a crash.
- *
+ *
* To deal with that, journal_get_undo_access requests write access to a
* buffer for parts of non-rewindable operations such as delete
* operations on the bitmaps. The journaling code must keep a copy of
* the buffer's contents prior to the undo_access call until such time
* as we know that the buffer has definitely been committed to disk.
- *
+ *
* We never need to know which transaction the committed data is part
* of, buffers touched here are guaranteed to be dirtied later and so
* will be committed to a new transaction in due course, at which point
@@ -911,13 +911,13 @@
return err;
}
-/**
+/**
* int journal_dirty_data() - mark a buffer as containing dirty data which
* needs to be flushed before we can commit the
- * current transaction.
+ * current transaction.
* @handle: transaction
* @bh: bufferhead to mark
- *
+ *
* The buffer is placed on the transaction's data list and is marked as
* belonging to the transaction.
*
@@ -946,15 +946,15 @@
/*
* What if the buffer is already part of a running transaction?
- *
+ *
* There are two cases:
* 1) It is part of the current running transaction. Refile it,
* just in case we have allocated it as metadata, deallocated
- * it, then reallocated it as data.
+ * it, then reallocated it as data.
* 2) It is part of the previous, still-committing transaction.
* If all we want to do is to guarantee that the buffer will be
* written to disk before this new transaction commits, then
- * being sure that the *previous* transaction has this same
+ * being sure that the *previous* transaction has this same
* property is sufficient for us! Just leave it on its old
* transaction.
*
@@ -1076,18 +1076,18 @@
return 0;
}
-/**
+/**
* int journal_dirty_metadata() - mark a buffer as containing dirty metadata
* @handle: transaction to add buffer to.
- * @bh: buffer to mark
- *
+ * @bh: buffer to mark
+ *
* mark dirty metadata which needs to be journaled as part of the current
* transaction.
*
* The buffer is placed on the transaction's metadata list and is marked
- * as belonging to the transaction.
+ * as belonging to the transaction.
*
- * Returns error number or 0 on success.
+ * Returns error number or 0 on success.
*
* Special care needs to be taken if the buffer already belongs to the
* current committing transaction (in which case we should have frozen
@@ -1135,11 +1135,11 @@
set_buffer_jbddirty(bh);
- /*
+ /*
* Metadata already on the current transaction list doesn't
* need to be filed. Metadata on another transaction's list must
* be committing, and will be refiled once the commit completes:
- * leave it alone for now.
+ * leave it alone for now.
*/
if (jh->b_transaction != transaction) {
JBUFFER_TRACE(jh, "already on other transaction");
@@ -1165,7 +1165,7 @@
return 0;
}
-/*
+/*
* journal_release_buffer: undo a get_write_access without any buffer
* updates, if the update decided in the end that it didn't need access.
*
@@ -1176,20 +1176,20 @@
BUFFER_TRACE(bh, "entry");
}
-/**
+/**
* void journal_forget() - bforget() for potentially-journaled buffers.
* @handle: transaction handle
* @bh: bh to 'forget'
*
* We can only do the bforget if there are no commits pending against the
* buffer. If the buffer is dirty in the current running transaction we
- * can safely unlink it.
+ * can safely unlink it.
*
* bh may not be a journalled buffer at all - it may be a non-JBD
* buffer which came off the hashtable. Check for this.
*
* Decrements bh->b_count by one.
- *
+ *
* Allow this call even if the handle has aborted --- it may be part of
* the caller's cleanup after an abort.
*/
@@ -1237,7 +1237,7 @@
drop_reserve = 1;
- /*
+ /*
* We are no longer going to journal this buffer.
* However, the commit of this transaction is still
* important to the buffer: the delete that we are now
@@ -1246,7 +1246,7 @@
*
* So, if we have a checkpoint on the buffer, we should
* now refile the buffer on our BJ_Forget list so that
- * we know to remove the checkpoint after we commit.
+ * we know to remove the checkpoint after we commit.
*/
if (jh->b_cp_transaction) {
@@ -1264,7 +1264,7 @@
}
}
} else if (jh->b_transaction) {
- J_ASSERT_JH(jh, (jh->b_transaction ==
+ J_ASSERT_JH(jh, (jh->b_transaction ==
journal->j_committing_transaction));
/* However, if the buffer is still owned by a prior
* (committing) transaction, we can't drop it yet... */
@@ -1294,7 +1294,7 @@
/**
* int journal_stop() - complete a transaction
* @handle: tranaction to complete.
- *
+ *
* All done for a particular handle.
*
* There is not much action needed here. We just return any remaining
@@ -1303,7 +1303,7 @@
* filesystem is marked for synchronous update.
*
* journal_stop itself will not usually return an error, but it may
- * do so in unusual circumstances. In particular, expect it to
+ * do so in unusual circumstances. In particular, expect it to
* return -EIO if a journal_abort has been executed since the
* transaction began.
*/
@@ -1373,7 +1373,7 @@
if (handle->h_sync ||
transaction->t_outstanding_credits >
journal->j_max_transaction_buffers ||
- time_after_eq(jiffies, transaction->t_expires)) {
+ time_after_eq(jiffies, transaction->t_expires)) {
/* Do this even for aborted journals: an abort still
* completes the commit thread, it just doesn't write
* anything to disk. */
@@ -1388,7 +1388,7 @@
/*
* Special case: JFS_SYNC synchronous updates require us
- * to wait for the commit to complete.
+ * to wait for the commit to complete.
*/
if (handle->h_sync && !(current->flags & PF_MEMALLOC))
err = log_wait_commit(journal, tid);
@@ -1439,7 +1439,7 @@
* jbd_lock_bh_state(jh2bh(jh)) is held.
*/
-static inline void
+static inline void
__blist_add_buffer(struct journal_head **list, struct journal_head *jh)
{
if (!*list) {
@@ -1454,7 +1454,7 @@
}
}
-/*
+/*
* Remove a buffer from a transaction list, given the transaction's list
* head pointer.
*
@@ -1475,7 +1475,7 @@
jh->b_tnext->b_tprev = jh->b_tprev;
}
-/*
+/*
* Remove a buffer from the appropriate transaction list.
*
* Note that this function can *change* the value of
@@ -1595,17 +1595,17 @@
}
-/**
+/**
* int journal_try_to_free_buffers() - try to free page buffers.
* @journal: journal for operation
* @page: to try and free
* @unused_gfp_mask: unused
*
- *
+ *
* For all the buffers on this page,
* if they are fully written out ordered data, move them onto BUF_CLEAN
* so try_to_free_buffers() can reap them.
- *
+ *
* This function returns non-zero if we wish try_to_free_buffers()
* to be called. We do this if the page is releasable by try_to_free_buffers().
* We also do it if the page has locked or dirty buffers and the caller wants
@@ -1629,7 +1629,7 @@
* cannot happen because we never reallocate freed data as metadata
* while the data is part of a transaction. Yes?
*/
-int journal_try_to_free_buffers(journal_t *journal,
+int journal_try_to_free_buffers(journal_t *journal,
struct page *page, gfp_t unused_gfp_mask)
{
struct buffer_head *head;
@@ -1697,7 +1697,7 @@
}
/*
- * journal_invalidatepage
+ * journal_invalidatepage
*
* This code is tricky. It has a number of cases to deal with.
*
@@ -1705,15 +1705,15 @@
*
* i_size must be updated on disk before we start calling invalidatepage on the
* data.
- *
+ *
* This is done in ext3 by defining an ext3_setattr method which
* updates i_size before truncate gets going. By maintaining this
* invariant, we can be sure that it is safe to throw away any buffers
* attached to the current transaction: once the transaction commits,
* we know that the data will not be needed.
- *
+ *
* Note however that we can *not* throw away data belonging to the
- * previous, committing transaction!
+ * previous, committing transaction!
*
* Any disk blocks which *are* part of the previous, committing
* transaction (and which therefore cannot be discarded immediately) are
@@ -1732,7 +1732,7 @@
* don't make guarantees about the order in which data hits disk --- in
* particular we don't guarantee that new dirty data is flushed before
* transaction commit --- so it is always safe just to discard data
- * immediately in that mode. --sct
+ * immediately in that mode. --sct
*/
/*
@@ -1876,9 +1876,9 @@
return may_free;
}
-/**
+/**
* void journal_invalidatepage()
- * @journal: journal to use for flush...
+ * @journal: journal to use for flush...
* @page: page to flush
* @offset: length of page to invalidate.
*
@@ -1886,7 +1886,7 @@
*
*/
void journal_invalidatepage(journal_t *journal,
- struct page *page,
+ struct page *page,
unsigned long offset)
{
struct buffer_head *head, *bh, *next;
@@ -1908,7 +1908,7 @@
next = bh->b_this_page;
if (offset <= curr_off) {
- /* This block is wholly outside the truncation point */
+ /* This block is wholly outside the truncation point */
lock_buffer(bh);
may_free &= journal_unmap_buffer(journal, bh);
unlock_buffer(bh);
@@ -1924,8 +1924,8 @@
}
}
-/*
- * File a buffer on the given transaction list.
+/*
+ * File a buffer on the given transaction list.
*/
void __journal_file_buffer(struct journal_head *jh,
transaction_t *transaction, int jlist)
@@ -1948,7 +1948,7 @@
* with __jbd_unexpected_dirty_buffer()'s handling of dirty
* state. */
- if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
+ if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
jlist == BJ_Shadow || jlist == BJ_Forget) {
if (test_clear_buffer_dirty(bh) ||
test_clear_buffer_jbddirty(bh))
@@ -2008,7 +2008,7 @@
jbd_unlock_bh_state(jh2bh(jh));
}
-/*
+/*
* Remove a buffer from its current buffer list in preparation for
* dropping it from its current transaction entirely. If the buffer has
* already started to be used by a subsequent transaction, refile the
@@ -2060,7 +2060,7 @@
* to the caller to remove the journal_head if necessary. For the
* unlocked journal_refile_buffer call, the caller isn't going to be
* doing anything else to the buffer so we need to do the cleanup
- * ourselves to avoid a jh leak.
+ * ourselves to avoid a jh leak.
*
* *** The journal_head may be freed by this call! ***
*/
diff --git a/fs/jffs/inode-v23.c b/fs/jffs/inode-v23.c
index 9306869..f5cf9c9 100644
--- a/fs/jffs/inode-v23.c
+++ b/fs/jffs/inode-v23.c
@@ -364,12 +364,11 @@
inode->i_ctime.tv_nsec = 0;
inode->i_mtime.tv_nsec = 0;
inode->i_atime.tv_nsec = 0;
- inode->i_blksize = PAGE_SIZE;
inode->i_blocks = (inode->i_size + 511) >> 9;
f = jffs_find_file(c, raw_inode->ino);
- inode->u.generic_ip = (void *)f;
+ inode->i_private = (void *)f;
insert_inode_hash(inode);
return inode;
@@ -442,7 +441,7 @@
});
result = -ENOTDIR;
- if (!(old_dir_f = (struct jffs_file *)old_dir->u.generic_ip)) {
+ if (!(old_dir_f = old_dir->i_private)) {
D(printk("jffs_rename(): Old dir invalid.\n"));
goto jffs_rename_end;
}
@@ -456,7 +455,7 @@
/* Find the new directory. */
result = -ENOTDIR;
- if (!(new_dir_f = (struct jffs_file *)new_dir->u.generic_ip)) {
+ if (!(new_dir_f = new_dir->i_private)) {
D(printk("jffs_rename(): New dir invalid.\n"));
goto jffs_rename_end;
}
@@ -593,7 +592,7 @@
}
else {
ddino = ((struct jffs_file *)
- inode->u.generic_ip)->pino;
+ inode->i_private)->pino;
}
D3(printk("jffs_readdir(): \"..\" %u\n", ddino));
if (filldir(dirent, "..", 2, filp->f_pos, ddino, DT_DIR) < 0) {
@@ -604,7 +603,7 @@
}
filp->f_pos++;
}
- f = ((struct jffs_file *)inode->u.generic_ip)->children;
+ f = ((struct jffs_file *)inode->i_private)->children;
j = 2;
while(f && (f->deleted || j++ < filp->f_pos )) {
@@ -652,7 +651,7 @@
lock_kernel();
D3({
- char *s = (char *)kmalloc(len + 1, GFP_KERNEL);
+ char *s = kmalloc(len + 1, GFP_KERNEL);
memcpy(s, name, len);
s[len] = '\0';
printk("jffs_lookup(): dir: 0x%p, name: \"%s\"\n", dir, s);
@@ -668,7 +667,7 @@
}
r = -EACCES;
- if (!(d = (struct jffs_file *)dir->u.generic_ip)) {
+ if (!(d = (struct jffs_file *)dir->i_private)) {
D(printk("jffs_lookup(): No such inode! (%lu)\n",
dir->i_ino));
goto jffs_lookup_end;
@@ -739,7 +738,7 @@
unsigned long read_len;
int result;
struct inode *inode = (struct inode*)page->mapping->host;
- struct jffs_file *f = (struct jffs_file *)inode->u.generic_ip;
+ struct jffs_file *f = (struct jffs_file *)inode->i_private;
struct jffs_control *c = (struct jffs_control *)inode->i_sb->s_fs_info;
int r;
loff_t offset;
@@ -828,7 +827,7 @@
});
lock_kernel();
- dir_f = (struct jffs_file *)dir->u.generic_ip;
+ dir_f = dir->i_private;
ASSERT(if (!dir_f) {
printk(KERN_ERR "jffs_mkdir(): No reference to a "
@@ -972,7 +971,7 @@
kfree(_name);
});
- dir_f = (struct jffs_file *) dir->u.generic_ip;
+ dir_f = dir->i_private;
c = dir_f->c;
result = -ENOENT;
@@ -1082,7 +1081,7 @@
if (!old_valid_dev(rdev))
return -EINVAL;
lock_kernel();
- dir_f = (struct jffs_file *)dir->u.generic_ip;
+ dir_f = dir->i_private;
c = dir_f->c;
D3(printk (KERN_NOTICE "mknod(): down biglock\n"));
@@ -1173,8 +1172,8 @@
lock_kernel();
D1({
int len = dentry->d_name.len;
- char *_name = (char *)kmalloc(len + 1, GFP_KERNEL);
- char *_symname = (char *)kmalloc(symname_len + 1, GFP_KERNEL);
+ char *_name = kmalloc(len + 1, GFP_KERNEL);
+ char *_symname = kmalloc(symname_len + 1, GFP_KERNEL);
memcpy(_name, dentry->d_name.name, len);
_name[len] = '\0';
memcpy(_symname, symname, symname_len);
@@ -1186,7 +1185,7 @@
kfree(_symname);
});
- dir_f = (struct jffs_file *)dir->u.generic_ip;
+ dir_f = dir->i_private;
ASSERT(if (!dir_f) {
printk(KERN_ERR "jffs_symlink(): No reference to a "
"jffs_file struct in inode.\n");
@@ -1282,14 +1281,14 @@
lock_kernel();
D1({
int len = dentry->d_name.len;
- char *s = (char *)kmalloc(len + 1, GFP_KERNEL);
+ char *s = kmalloc(len + 1, GFP_KERNEL);
memcpy(s, dentry->d_name.name, len);
s[len] = '\0';
printk("jffs_create(): dir: 0x%p, name: \"%s\"\n", dir, s);
kfree(s);
});
- dir_f = (struct jffs_file *)dir->u.generic_ip;
+ dir_f = dir->i_private;
ASSERT(if (!dir_f) {
printk(KERN_ERR "jffs_create(): No reference to a "
"jffs_file struct in inode.\n");
@@ -1403,9 +1402,9 @@
goto out_isem;
}
- if (!(f = (struct jffs_file *)inode->u.generic_ip)) {
- D(printk("jffs_file_write(): inode->u.generic_ip = 0x%p\n",
- inode->u.generic_ip));
+ if (!(f = inode->i_private)) {
+ D(printk("jffs_file_write(): inode->i_private = 0x%p\n",
+ inode->i_private));
goto out_isem;
}
@@ -1693,7 +1692,7 @@
mutex_unlock(&c->fmc->biglock);
return;
}
- inode->u.generic_ip = (void *)f;
+ inode->i_private = f;
inode->i_mode = f->mode;
inode->i_nlink = f->nlink;
inode->i_uid = f->uid;
@@ -1706,7 +1705,6 @@
inode->i_mtime.tv_nsec =
inode->i_ctime.tv_nsec = 0;
- inode->i_blksize = PAGE_SIZE;
inode->i_blocks = (inode->i_size + 511) >> 9;
if (S_ISREG(inode->i_mode)) {
inode->i_op = &jffs_file_inode_operations;
@@ -1748,7 +1746,7 @@
lock_kernel();
inode->i_size = 0;
inode->i_blocks = 0;
- inode->u.generic_ip = NULL;
+ inode->i_private = NULL;
clear_inode(inode);
if (inode->i_nlink == 0) {
c = (struct jffs_control *) inode->i_sb->s_fs_info;
diff --git a/fs/jffs/intrep.c b/fs/jffs/intrep.c
index 9000f1e..4a543e1 100644
--- a/fs/jffs/intrep.c
+++ b/fs/jffs/intrep.c
@@ -488,13 +488,11 @@
{
struct jffs_file *f;
- if (!(f = (struct jffs_file *)kmalloc(sizeof(struct jffs_file),
- GFP_KERNEL))) {
+ if (!(f = kzalloc(sizeof(*f), GFP_KERNEL))) {
D(printk("jffs_create_file(): Failed!\n"));
return NULL;
}
no_jffs_file++;
- memset(f, 0, sizeof(struct jffs_file));
f->ino = raw_inode->ino;
f->pino = raw_inode->pino;
f->nlink = raw_inode->nlink;
@@ -516,7 +514,7 @@
D2(printk("jffs_create_control()\n"));
- if (!(c = (struct jffs_control *)kmalloc(s, GFP_KERNEL))) {
+ if (!(c = kmalloc(s, GFP_KERNEL))) {
goto fail_control;
}
DJM(no_jffs_control++);
@@ -524,7 +522,7 @@
c->gc_task = NULL;
c->hash_len = JFFS_HASH_SIZE;
s = sizeof(struct list_head) * c->hash_len;
- if (!(c->hash = (struct list_head *)kmalloc(s, GFP_KERNEL))) {
+ if (!(c->hash = kmalloc(s, GFP_KERNEL))) {
goto fail_hash;
}
DJM(no_hash++);
@@ -593,8 +591,7 @@
D2(printk("jffs_add_virtual_root(): "
"Creating a virtual root directory.\n"));
- if (!(root = (struct jffs_file *)kmalloc(sizeof(struct jffs_file),
- GFP_KERNEL))) {
+ if (!(root = kmalloc(sizeof(struct jffs_file), GFP_KERNEL))) {
return -ENOMEM;
}
no_jffs_file++;
diff --git a/fs/jffs/jffs_fm.c b/fs/jffs/jffs_fm.c
index 7d8ca1a..29b68d9 100644
--- a/fs/jffs/jffs_fm.c
+++ b/fs/jffs/jffs_fm.c
@@ -94,8 +94,7 @@
struct mtd_info *mtd;
D3(printk("jffs_build_begin()\n"));
- fmc = (struct jffs_fmcontrol *)kmalloc(sizeof(struct jffs_fmcontrol),
- GFP_KERNEL);
+ fmc = kmalloc(sizeof(*fmc), GFP_KERNEL);
if (!fmc) {
D(printk("jffs_build_begin(): Allocation of "
"struct jffs_fmcontrol failed!\n"));
@@ -486,8 +485,7 @@
D3(printk("jffs_add_node(): ino = %u\n", node->ino));
- ref = (struct jffs_node_ref *)kmalloc(sizeof(struct jffs_node_ref),
- GFP_KERNEL);
+ ref = kmalloc(sizeof(*ref), GFP_KERNEL);
if (!ref)
return -ENOMEM;
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index 4780f82..72d9909d 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -263,7 +263,6 @@
inode->i_nlink = f->inocache->nlink;
- inode->i_blksize = PAGE_SIZE;
inode->i_blocks = (inode->i_size + 511) >> 9;
switch (inode->i_mode & S_IFMT) {
@@ -449,7 +448,6 @@
inode->i_atime = inode->i_ctime = inode->i_mtime = CURRENT_TIME_SEC;
ri->atime = ri->mtime = ri->ctime = cpu_to_je32(I_SEC(inode->i_mtime));
- inode->i_blksize = PAGE_SIZE;
inode->i_blocks = 0;
inode->i_size = 0;
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 68e3953..6de3745 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -119,10 +119,9 @@
struct jffs2_sb_info *c;
int ret;
- c = kmalloc(sizeof(*c), GFP_KERNEL);
+ c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
- memset(c, 0, sizeof(*c));
c->mtd = mtd;
sb = sget(fs_type, jffs2_sb_compare, jffs2_sb_set, c);
diff --git a/fs/jfs/jfs_extent.c b/fs/jfs/jfs_extent.c
index 4d52593..4c74f09 100644
--- a/fs/jfs/jfs_extent.c
+++ b/fs/jfs/jfs_extent.c
@@ -468,7 +468,7 @@
int extFill(struct inode *ip, xad_t * xp)
{
int rc, nbperpage = JFS_SBI(ip->i_sb)->nbperpage;
- s64 blkno = offsetXAD(xp) >> ip->i_blksize;
+ s64 blkno = offsetXAD(xp) >> ip->i_blkbits;
// assert(ISSPARSE(ip));
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index ccbe60a..369d7f3 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -3115,7 +3115,6 @@
ip->i_mtime.tv_nsec = le32_to_cpu(dip->di_mtime.tv_nsec);
ip->i_ctime.tv_sec = le32_to_cpu(dip->di_ctime.tv_sec);
ip->i_ctime.tv_nsec = le32_to_cpu(dip->di_ctime.tv_nsec);
- ip->i_blksize = ip->i_sb->s_blocksize;
ip->i_blocks = LBLK2PBLK(ip->i_sb, le64_to_cpu(dip->di_nblocks));
ip->i_generation = le32_to_cpu(dip->di_gen);
diff --git a/fs/jfs/jfs_inode.c b/fs/jfs/jfs_inode.c
index 495df40..bffaca9 100644
--- a/fs/jfs/jfs_inode.c
+++ b/fs/jfs/jfs_inode.c
@@ -115,7 +115,6 @@
}
jfs_inode->mode2 |= mode;
- inode->i_blksize = sb->s_blocksize;
inode->i_blocks = 0;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
jfs_inode->otime = inode->i_ctime.tv_sec;
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index e1e0a6e..f5afc12 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -257,7 +257,7 @@
int rc = 0;
int xflag;
s64 xaddr;
- sector_t file_blocks = (inode->i_size + inode->i_blksize - 1) >>
+ sector_t file_blocks = (inode->i_size + inode->i_sb->s_blocksize - 1) >>
inode->i_blkbits;
if (lblock >= file_blocks)
diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c
index efbb586..3856efc 100644
--- a/fs/jfs/jfs_txnmgr.c
+++ b/fs/jfs/jfs_txnmgr.c
@@ -282,7 +282,7 @@
TxLockVHWM = (nTxLock * 8) / 10;
size = sizeof(struct tblock) * nTxBlock;
- TxBlock = (struct tblock *) vmalloc(size);
+ TxBlock = vmalloc(size);
if (TxBlock == NULL)
return -ENOMEM;
@@ -307,7 +307,7 @@
* tlock id = 0 is reserved.
*/
size = sizeof(struct tlock) * nTxLock;
- TxLock = (struct tlock *) vmalloc(size);
+ TxLock = vmalloc(size);
if (TxLock == NULL) {
vfree(TxBlock);
return -ENOMEM;
diff --git a/fs/libfs.c b/fs/libfs.c
index ac02ea6..8db5afb 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -383,7 +383,6 @@
return -ENOMEM;
inode->i_mode = S_IFDIR | 0755;
inode->i_uid = inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_op = &simple_dir_inode_operations;
@@ -405,7 +404,6 @@
goto out;
inode->i_mode = S_IFREG | files->mode;
inode->i_uid = inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_fop = files->ops;
@@ -547,7 +545,7 @@
attr->get = get;
attr->set = set;
- attr->data = inode->u.generic_ip;
+ attr->data = inode->i_private;
attr->fmt = fmt;
mutex_init(&attr->mutex);
diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c
index 52774fe..f95cc3f 100644
--- a/fs/lockd/clntlock.c
+++ b/fs/lockd/clntlock.c
@@ -160,7 +160,7 @@
*/
list_splice_init(&host->h_granted, &host->h_reclaim);
- dprintk("NLM: reclaiming locks for host %s", host->h_name);
+ dprintk("NLM: reclaiming locks for host %s\n", host->h_name);
}
static void nlmclnt_finish_reclaim(struct nlm_host *host)
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 50dbb67..271e216 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -100,7 +100,7 @@
res = __nlm_find_lockowner(host, owner);
if (res == NULL) {
spin_unlock(&host->h_lock);
- new = (struct nlm_lockowner *)kmalloc(sizeof(*new), GFP_KERNEL);
+ new = kmalloc(sizeof(*new), GFP_KERNEL);
spin_lock(&host->h_lock);
res = __nlm_find_lockowner(host, owner);
if (res == NULL && new != NULL) {
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 703fb03..a0d0b58 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -99,9 +99,9 @@
/* Ooops, no host found, create it */
dprintk("lockd: creating host entry\n");
- if (!(host = (struct nlm_host *) kmalloc(sizeof(*host), GFP_KERNEL)))
+ host = kzalloc(sizeof(*host), GFP_KERNEL);
+ if (!host)
goto nohost;
- memset(host, 0, sizeof(*host));
addr = sin->sin_addr.s_addr;
sprintf(host->h_name, "%u.%u.%u.%u", NIPQUAD(addr));
diff --git a/fs/lockd/svcsubs.c b/fs/lockd/svcsubs.c
index 01b4db9..a92dd98f 100644
--- a/fs/lockd/svcsubs.c
+++ b/fs/lockd/svcsubs.c
@@ -100,11 +100,10 @@
nlm_debug_print_fh("creating file for", f);
nfserr = nlm_lck_denied_nolocks;
- file = (struct nlm_file *) kmalloc(sizeof(*file), GFP_KERNEL);
+ file = kzalloc(sizeof(*file), GFP_KERNEL);
if (!file)
goto out_unlock;
- memset(file, 0, sizeof(*file));
memcpy(&file->f_handle, f, sizeof(struct nfs_fh));
file->f_hash = hash;
init_MUTEX(&file->f_sema);
diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c
index 4a6abc4..df6b107 100644
--- a/fs/minix/bitmap.c
+++ b/fs/minix/bitmap.c
@@ -254,7 +254,7 @@
inode->i_gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
inode->i_ino = j;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
- inode->i_blocks = inode->i_blksize = 0;
+ inode->i_blocks = 0;
memset(&minix_i(inode)->u, 0, sizeof(minix_i(inode)->u));
insert_inode_hash(inode);
mark_inode_dirty(inode);
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 330ff9f..c11a4b9 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -90,8 +90,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(minix_inode_cachep))
- printk(KERN_INFO "minix_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(minix_inode_cachep);
}
static struct super_operations minix_sops = {
@@ -145,11 +144,10 @@
struct inode *root_inode;
struct minix_sb_info *sbi;
- sbi = kmalloc(sizeof(struct minix_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct minix_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
s->s_fs_info = sbi;
- memset(sbi, 0, sizeof(struct minix_sb_info));
/* N.B. These should be compile-time tests.
Unfortunately that is impossible. */
@@ -207,10 +205,9 @@
if (sbi->s_imap_blocks == 0 || sbi->s_zmap_blocks == 0)
goto out_illegal_sb;
i = (sbi->s_imap_blocks + sbi->s_zmap_blocks) * sizeof(bh);
- map = kmalloc(i, GFP_KERNEL);
+ map = kzalloc(i, GFP_KERNEL);
if (!map)
goto out_no_map;
- memset(map, 0, i);
sbi->s_imap = &map[0];
sbi->s_zmap = &map[sbi->s_imap_blocks];
@@ -399,7 +396,7 @@
inode->i_mtime.tv_nsec = 0;
inode->i_atime.tv_nsec = 0;
inode->i_ctime.tv_nsec = 0;
- inode->i_blocks = inode->i_blksize = 0;
+ inode->i_blocks = 0;
for (i = 0; i < 9; i++)
minix_inode->u.i1_data[i] = raw_inode->i_zone[i];
minix_set_inode(inode, old_decode_dev(raw_inode->i_zone[0]));
@@ -432,7 +429,7 @@
inode->i_mtime.tv_nsec = 0;
inode->i_atime.tv_nsec = 0;
inode->i_ctime.tv_nsec = 0;
- inode->i_blocks = inode->i_blksize = 0;
+ inode->i_blocks = 0;
for (i = 0; i < 10; i++)
minix_inode->u.i2_data[i] = raw_inode->i_zone[i];
minix_set_inode(inode, old_decode_dev(raw_inode->i_zone[0]));
diff --git a/fs/namei.c b/fs/namei.c
index 6b591c0..808e4ea 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -372,6 +372,30 @@
fput(nd->intent.open.file);
}
+static inline struct dentry *
+do_revalidate(struct dentry *dentry, struct nameidata *nd)
+{
+ int status = dentry->d_op->d_revalidate(dentry, nd);
+ if (unlikely(status <= 0)) {
+ /*
+ * The dentry failed validation.
+ * If d_revalidate returned 0 attempt to invalidate
+ * the dentry otherwise d_revalidate is asking us
+ * to return a fail status.
+ */
+ if (!status) {
+ if (!d_invalidate(dentry)) {
+ dput(dentry);
+ dentry = NULL;
+ }
+ } else {
+ dput(dentry);
+ dentry = ERR_PTR(status);
+ }
+ }
+ return dentry;
+}
+
/*
* Internal lookup() using the new generic dcache.
* SMP-safe
@@ -386,12 +410,9 @@
if (!dentry)
dentry = d_lookup(parent, name);
- if (dentry && dentry->d_op && dentry->d_op->d_revalidate) {
- if (!dentry->d_op->d_revalidate(dentry, nd) && !d_invalidate(dentry)) {
- dput(dentry);
- dentry = NULL;
- }
- }
+ if (dentry && dentry->d_op && dentry->d_op->d_revalidate)
+ dentry = do_revalidate(dentry, nd);
+
return dentry;
}
@@ -484,10 +505,9 @@
*/
mutex_unlock(&dir->i_mutex);
if (result->d_op && result->d_op->d_revalidate) {
- if (!result->d_op->d_revalidate(result, nd) && !d_invalidate(result)) {
- dput(result);
+ result = do_revalidate(result, nd);
+ if (!result)
result = ERR_PTR(-ENOENT);
- }
}
return result;
}
@@ -767,12 +787,12 @@
goto done;
need_revalidate:
- if (dentry->d_op->d_revalidate(dentry, nd))
- goto done;
- if (d_invalidate(dentry))
- goto done;
- dput(dentry);
- goto need_lookup;
+ dentry = do_revalidate(dentry, nd);
+ if (!dentry)
+ goto need_lookup;
+ if (IS_ERR(dentry))
+ goto fail;
+ goto done;
fail:
return PTR_ERR(dentry);
diff --git a/fs/namespace.c b/fs/namespace.c
index fa7ed6a9f..36d1808 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -17,6 +17,7 @@
#include <linux/acct.h>
#include <linux/capability.h>
#include <linux/module.h>
+#include <linux/sysfs.h>
#include <linux/seq_file.h>
#include <linux/namespace.h>
#include <linux/namei.h>
@@ -28,15 +29,6 @@
extern int __init init_rootfs(void);
-#ifdef CONFIG_SYSFS
-extern int __init sysfs_init(void);
-#else
-static inline int sysfs_init(void)
-{
- return 0;
-}
-#endif
-
/* spinlock for vfsmount related operations, inplace of dcache_lock */
__cacheline_aligned_in_smp DEFINE_SPINLOCK(vfsmount_lock);
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 1ddf77b..42e3bef 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -81,8 +81,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(ncp_inode_cachep))
- printk(KERN_INFO "ncp_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(ncp_inode_cachep);
}
static int ncp_remount(struct super_block *sb, int *flags, char* data)
@@ -224,7 +223,6 @@
inode->i_nlink = 1;
inode->i_uid = server->m.uid;
inode->i_gid = server->m.gid;
- inode->i_blksize = NCP_BLOCK_SIZE;
ncp_update_dates(inode, &nwinfo->i);
ncp_update_inode(inode, nwinfo);
@@ -411,11 +409,10 @@
#endif
struct ncp_entry_info finfo;
- server = kmalloc(sizeof(struct ncp_server), GFP_KERNEL);
+ server = kzalloc(sizeof(struct ncp_server), GFP_KERNEL);
if (!server)
return -ENOMEM;
sb->s_fs_info = server;
- memset(server, 0, sizeof(struct ncp_server));
error = -EFAULT;
if (raw_data == NULL)
diff --git a/fs/ncpfs/symlink.c b/fs/ncpfs/symlink.c
index ca92c24..e3d26c1 100644
--- a/fs/ncpfs/symlink.c
+++ b/fs/ncpfs/symlink.c
@@ -48,7 +48,7 @@
char *buf = kmap(page);
error = -ENOMEM;
- rawlink=(char *)kmalloc(NCP_MAX_SYMLINK_SIZE, GFP_KERNEL);
+ rawlink = kmalloc(NCP_MAX_SYMLINK_SIZE, GFP_KERNEL);
if (!rawlink)
goto fail;
@@ -126,7 +126,7 @@
/* EPERM is returned by VFS if symlink procedure does not exist */
return -EPERM;
- rawlink=(char *)kmalloc(NCP_MAX_SYMLINK_SIZE, GFP_KERNEL);
+ rawlink = kmalloc(NCP_MAX_SYMLINK_SIZE, GFP_KERNEL);
if (!rawlink)
return -ENOMEM;
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 5713367..841c99a 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -20,11 +20,6 @@
#include "delegation.h"
#include "internal.h"
-static struct nfs_delegation *nfs_alloc_delegation(void)
-{
- return (struct nfs_delegation *)kmalloc(sizeof(struct nfs_delegation), GFP_KERNEL);
-}
-
static void nfs_free_delegation(struct nfs_delegation *delegation)
{
if (delegation->cred)
@@ -124,7 +119,7 @@
if ((nfsi->cache_validity & (NFS_INO_REVAL_PAGECACHE|NFS_INO_INVALID_ATTR)))
__nfs_revalidate_inode(NFS_SERVER(inode), inode);
- delegation = nfs_alloc_delegation();
+ delegation = kmalloc(sizeof(*delegation), GFP_KERNEL);
if (delegation == NULL)
return -ENOMEM;
memcpy(delegation->stateid.data, res->delegation.data,
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 76ca1cb..377839b 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -855,6 +855,5 @@
*/
void nfs_destroy_directcache(void)
{
- if (kmem_cache_destroy(nfs_direct_cachep))
- printk(KERN_INFO "nfs_direct_cache: not all structures were freed\n");
+ kmem_cache_destroy(nfs_direct_cachep);
}
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index e8c143d..bc9376c 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -277,10 +277,8 @@
* report the blocks in 512byte units
*/
inode->i_blocks = nfs_calc_block_size(fattr->du.nfs3.used);
- inode->i_blksize = inode->i_sb->s_blocksize;
} else {
inode->i_blocks = fattr->du.nfs2.blocks;
- inode->i_blksize = fattr->du.nfs2.blocksize;
}
nfsi->attrtimeo = NFS_MINATTRTIMEO(inode);
nfsi->attrtimeo_timestamp = jiffies;
@@ -443,7 +441,7 @@
{
struct nfs_open_context *ctx;
- ctx = (struct nfs_open_context *)kmalloc(sizeof(*ctx), GFP_KERNEL);
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
if (ctx != NULL) {
atomic_set(&ctx->count, 1);
ctx->dentry = dget(dentry);
@@ -969,10 +967,8 @@
* report the blocks in 512byte units
*/
inode->i_blocks = nfs_calc_block_size(fattr->du.nfs3.used);
- inode->i_blksize = inode->i_sb->s_blocksize;
} else {
inode->i_blocks = fattr->du.nfs2.blocks;
- inode->i_blksize = fattr->du.nfs2.blocksize;
}
if ((fattr->valid & NFS_ATTR_FATTR_V4) != 0 &&
@@ -1134,8 +1130,7 @@
static void nfs_destroy_inodecache(void)
{
- if (kmem_cache_destroy(nfs_inode_cachep))
- printk(KERN_INFO "nfs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(nfs_inode_cachep);
}
/*
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 77b0068..6040864 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -26,6 +26,11 @@
static DECLARE_WORK(nfs_automount_task, nfs_expire_automounts, &nfs_automount_list);
int nfs_mountpoint_expiry_timeout = 500 * HZ;
+static struct vfsmount *nfs_do_submount(const struct vfsmount *mnt_parent,
+ const struct dentry *dentry,
+ struct nfs_fh *fh,
+ struct nfs_fattr *fattr);
+
/*
* nfs_path - reconstruct the path given an arbitrary dentry
* @base - arbitrary string to prepend to the path
@@ -209,9 +214,10 @@
* @fattr - attributes for new root inode
*
*/
-struct vfsmount *nfs_do_submount(const struct vfsmount *mnt_parent,
- const struct dentry *dentry, struct nfs_fh *fh,
- struct nfs_fattr *fattr)
+static struct vfsmount *nfs_do_submount(const struct vfsmount *mnt_parent,
+ const struct dentry *dentry,
+ struct nfs_fh *fh,
+ struct nfs_fattr *fattr)
{
struct nfs_clone_mount mountdata = {
.sb = mnt_parent->mnt_sb,
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index f8688ea..3b234d4 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -449,7 +449,7 @@
struct nfs_fattr res;
} *ptr;
- ptr = (struct unlinkxdr *)kmalloc(sizeof(*ptr), GFP_KERNEL);
+ ptr = kmalloc(sizeof(*ptr), GFP_KERNEL);
if (!ptr)
return -ENOMEM;
ptr->arg.fh = NFS_FH(dir->d_inode);
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 36e902a..829af32 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -392,7 +392,6 @@
void nfs_destroy_nfspagecache(void)
{
- if (kmem_cache_destroy(nfs_page_cachep))
- printk(KERN_INFO "nfs_page: not all structures were freed\n");
+ kmem_cache_destroy(nfs_page_cachep);
}
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index 630e506..4529cc4 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -352,7 +352,7 @@
{
struct nfs_diropargs *arg;
- arg = (struct nfs_diropargs *)kmalloc(sizeof(*arg), GFP_KERNEL);
+ arg = kmalloc(sizeof(*arg), GFP_KERNEL);
if (!arg)
return -ENOMEM;
arg->fh = NFS_FH(dir->d_inode);
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 69f1549..c2e49c3 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -737,6 +737,5 @@
void nfs_destroy_readpagecache(void)
{
mempool_destroy(nfs_rdata_mempool);
- if (kmem_cache_destroy(nfs_rdata_cachep))
- printk(KERN_INFO "nfs_read_data: not all structures were freed\n");
+ kmem_cache_destroy(nfs_rdata_cachep);
}
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index c12effb..b674462 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1565,7 +1565,6 @@
{
mempool_destroy(nfs_commit_mempool);
mempool_destroy(nfs_wdata_mempool);
- if (kmem_cache_destroy(nfs_wdata_cachep))
- printk(KERN_INFO "nfs_write_data: not all structures were freed\n");
+ kmem_cache_destroy(nfs_wdata_cachep);
}
diff --git a/fs/nfsd/nfs4idmap.c b/fs/nfsd/nfs4idmap.c
index bea6b94..b1902eb 100644
--- a/fs/nfsd/nfs4idmap.c
+++ b/fs/nfsd/nfs4idmap.c
@@ -573,10 +573,9 @@
struct idmap_defer_req *mdr;
int ret;
- mdr = kmalloc(sizeof(*mdr), GFP_KERNEL);
+ mdr = kzalloc(sizeof(*mdr), GFP_KERNEL);
if (!mdr)
return -ENOMEM;
- memset(mdr, 0, sizeof(*mdr));
atomic_set(&mdr->count, 1);
init_waitqueue_head(&mdr->waitq);
mdr->req.defer = idmap_defer;
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 9daa0b9..ebcf226 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -339,8 +339,7 @@
{
struct nfs4_client *clp;
- if ((clp = kmalloc(sizeof(struct nfs4_client), GFP_KERNEL))!= NULL) {
- memset(clp, 0, sizeof(*clp));
+ if ((clp = kzalloc(sizeof(struct nfs4_client), GFP_KERNEL))!= NULL) {
if ((clp->cl_name.data = kmalloc(name.len, GFP_KERNEL)) != NULL) {
memcpy(clp->cl_name.data, name.data, name.len);
clp->cl_name.len = name.len;
@@ -1006,13 +1005,10 @@
static void
nfsd4_free_slab(kmem_cache_t **slab)
{
- int status;
-
if (*slab == NULL)
return;
- status = kmem_cache_destroy(*slab);
+ kmem_cache_destroy(*slab);
*slab = NULL;
- WARN_ON(status);
}
static void
diff --git a/fs/ntfs/dir.c b/fs/ntfs/dir.c
index d1e2c6f..85c36b8 100644
--- a/fs/ntfs/dir.c
+++ b/fs/ntfs/dir.c
@@ -1149,8 +1149,7 @@
* Allocate a buffer to store the current name being processed
* converted to format determined by current NLS.
*/
- name = (u8*)kmalloc(NTFS_MAX_NAME_LEN * NLS_MAX_CHARSET_SIZE + 1,
- GFP_NOFS);
+ name = kmalloc(NTFS_MAX_NAME_LEN * NLS_MAX_CHARSET_SIZE + 1, GFP_NOFS);
if (unlikely(!name)) {
err = -ENOMEM;
goto err_out;
@@ -1191,7 +1190,7 @@
* map the mft record without deadlocking.
*/
rc = le32_to_cpu(ctx->attr->data.resident.value_length);
- ir = (INDEX_ROOT*)kmalloc(rc, GFP_NOFS);
+ ir = kmalloc(rc, GFP_NOFS);
if (unlikely(!ir)) {
err = -ENOMEM;
goto err_out;
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index d313f35..933dbd8 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -137,7 +137,7 @@
BUG_ON(!na->name);
i = na->name_len * sizeof(ntfschar);
- ni->name = (ntfschar*)kmalloc(i + sizeof(ntfschar), GFP_ATOMIC);
+ ni->name = kmalloc(i + sizeof(ntfschar), GFP_ATOMIC);
if (!ni->name)
return -ENOMEM;
memcpy(ni->name, na->name, i);
@@ -556,8 +556,6 @@
/* Setup the generic vfs inode parts now. */
- /* This is the optimal IO size (for stat), not the fs block size. */
- vi->i_blksize = PAGE_CACHE_SIZE;
/*
* This is for checking whether an inode has changed w.r.t. a file so
* that the file can be updated if necessary (compare with f_version).
@@ -1234,7 +1232,6 @@
base_ni = NTFS_I(base_vi);
/* Just mirror the values from the base inode. */
- vi->i_blksize = base_vi->i_blksize;
vi->i_version = base_vi->i_version;
vi->i_uid = base_vi->i_uid;
vi->i_gid = base_vi->i_gid;
@@ -1504,7 +1501,6 @@
ni = NTFS_I(vi);
base_ni = NTFS_I(base_vi);
/* Just mirror the values from the base inode. */
- vi->i_blksize = base_vi->i_blksize;
vi->i_version = base_vi->i_version;
vi->i_uid = base_vi->i_uid;
vi->i_gid = base_vi->i_gid;
diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c
index 2438c00..584260f 100644
--- a/fs/ntfs/mft.c
+++ b/fs/ntfs/mft.c
@@ -331,7 +331,7 @@
ntfs_inode **tmp;
int new_size = (base_ni->nr_extents + 4) * sizeof(ntfs_inode *);
- tmp = (ntfs_inode **)kmalloc(new_size, GFP_NOFS);
+ tmp = kmalloc(new_size, GFP_NOFS);
if (unlikely(!tmp)) {
ntfs_error(base_ni->vol->sb, "Failed to allocate "
"internal buffer.");
@@ -2638,11 +2638,6 @@
}
vi->i_ino = bit;
/*
- * This is the optimal IO size (for stat), not the fs block
- * size.
- */
- vi->i_blksize = PAGE_CACHE_SIZE;
- /*
* This is for checking whether an inode has changed w.r.t. a
* file so that the file can be updated if necessary (compare
* with f_version).
@@ -2893,7 +2888,7 @@
if (!(base_ni->nr_extents & 3)) {
int new_size = (base_ni->nr_extents + 4) * sizeof(ntfs_inode*);
- extent_nis = (ntfs_inode**)kmalloc(new_size, GFP_NOFS);
+ extent_nis = kmalloc(new_size, GFP_NOFS);
if (unlikely(!extent_nis)) {
ntfs_error(vol->sb, "Failed to allocate internal "
"buffer during rollback.%s", es);
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 74e0ee8..6b2712f 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -3248,32 +3248,14 @@
static void __exit exit_ntfs_fs(void)
{
- int err = 0;
-
ntfs_debug("Unregistering NTFS driver.");
unregister_filesystem(&ntfs_fs_type);
-
- if (kmem_cache_destroy(ntfs_big_inode_cache) && (err = 1))
- printk(KERN_CRIT "NTFS: Failed to destory %s.\n",
- ntfs_big_inode_cache_name);
- if (kmem_cache_destroy(ntfs_inode_cache) && (err = 1))
- printk(KERN_CRIT "NTFS: Failed to destory %s.\n",
- ntfs_inode_cache_name);
- if (kmem_cache_destroy(ntfs_name_cache) && (err = 1))
- printk(KERN_CRIT "NTFS: Failed to destory %s.\n",
- ntfs_name_cache_name);
- if (kmem_cache_destroy(ntfs_attr_ctx_cache) && (err = 1))
- printk(KERN_CRIT "NTFS: Failed to destory %s.\n",
- ntfs_attr_ctx_cache_name);
- if (kmem_cache_destroy(ntfs_index_ctx_cache) && (err = 1))
- printk(KERN_CRIT "NTFS: Failed to destory %s.\n",
- ntfs_index_ctx_cache_name);
- if (err)
- printk(KERN_CRIT "NTFS: This causes memory to leak! There is "
- "probably a BUG in the driver! Please report "
- "you saw this message to "
- "linux-ntfs-dev@lists.sourceforge.net\n");
+ kmem_cache_destroy(ntfs_big_inode_cache);
+ kmem_cache_destroy(ntfs_inode_cache);
+ kmem_cache_destroy(ntfs_name_cache);
+ kmem_cache_destroy(ntfs_attr_ctx_cache);
+ kmem_cache_destroy(ntfs_index_ctx_cache);
/* Unregister the ntfs sysctls. */
ntfs_sysctl(0);
}
diff --git a/fs/ntfs/unistr.c b/fs/ntfs/unistr.c
index b123c0f..a1b5721 100644
--- a/fs/ntfs/unistr.c
+++ b/fs/ntfs/unistr.c
@@ -350,7 +350,7 @@
}
if (!ns) {
ns_len = ins_len * NLS_MAX_CHARSET_SIZE;
- ns = (unsigned char*)kmalloc(ns_len + 1, GFP_NOFS);
+ ns = kmalloc(ns_len + 1, GFP_NOFS);
if (!ns)
goto mem_err_out;
}
@@ -365,7 +365,7 @@
else if (wc == -ENAMETOOLONG && ns != *outs) {
unsigned char *tc;
/* Grow in multiples of 64 bytes. */
- tc = (unsigned char*)kmalloc((ns_len + 64) &
+ tc = kmalloc((ns_len + 64) &
~63, GFP_NOFS);
if (tc) {
memcpy(tc, ns, ns_len);
diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c
index 033ad17..0368c64 100644
--- a/fs/ocfs2/dlm/dlmfs.c
+++ b/fs/ocfs2/dlm/dlmfs.c
@@ -335,7 +335,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_mapping->backing_dev_info = &dlmfs_backing_dev_info;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
@@ -362,7 +361,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_mapping->backing_dev_info = &dlmfs_backing_dev_info;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
@@ -629,9 +627,7 @@
flush_workqueue(user_dlm_worker);
destroy_workqueue(user_dlm_worker);
- if (kmem_cache_destroy(dlmfs_inode_cache))
- printk(KERN_INFO "dlmfs_inode_cache: not all structures "
- "were freed\n");
+ kmem_cache_destroy(dlmfs_inode_cache);
}
MODULE_AUTHOR("Oracle");
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index de88706..8801e41 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2052,7 +2052,7 @@
mlog_errno(ret);
goto out;
}
- osb = (struct ocfs2_super *) inode->u.generic_ip;
+ osb = inode->i_private;
ocfs2_get_dlm_debug(osb->osb_dlm_debug);
priv->p_dlm_debug = osb->osb_dlm_debug;
INIT_LIST_HEAD(&priv->p_iter_res.l_debug_list);
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 69d3db5..16e8e74 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -269,7 +269,6 @@
inode->i_mode = le16_to_cpu(fe->i_mode);
inode->i_uid = le32_to_cpu(fe->i_uid);
inode->i_gid = le32_to_cpu(fe->i_gid);
- inode->i_blksize = (u32)osb->s_clustersize;
/* Fast symlinks will have i_size but no allocated clusters. */
if (S_ISLNK(inode->i_mode) && !fe->i_clusters)
@@ -1258,8 +1257,6 @@
void ocfs2_refresh_inode(struct inode *inode,
struct ocfs2_dinode *fe)
{
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-
spin_lock(&OCFS2_I(inode)->ip_lock);
OCFS2_I(inode)->ip_clusters = le32_to_cpu(fe->i_clusters);
@@ -1270,7 +1267,6 @@
inode->i_uid = le32_to_cpu(fe->i_uid);
inode->i_gid = le32_to_cpu(fe->i_gid);
inode->i_mode = le16_to_cpu(fe->i_mode);
- inode->i_blksize = (u32) osb->s_clustersize;
if (S_ISLNK(inode->i_mode) && le32_to_cpu(fe->i_clusters) == 0)
inode->i_blocks = 0;
else
diff --git a/fs/partitions/efi.c b/fs/partitions/efi.c
index 6373028..1bea610 100644
--- a/fs/partitions/efi.c
+++ b/fs/partitions/efi.c
@@ -238,10 +238,9 @@
le32_to_cpu(gpt->sizeof_partition_entry);
if (!count)
return NULL;
- pte = kmalloc(count, GFP_KERNEL);
+ pte = kzalloc(count, GFP_KERNEL);
if (!pte)
return NULL;
- memset(pte, 0, count);
if (read_lba(bdev, le64_to_cpu(gpt->partition_entry_lba),
(u8 *) pte,
@@ -269,10 +268,9 @@
if (!bdev)
return NULL;
- gpt = kmalloc(sizeof (gpt_header), GFP_KERNEL);
+ gpt = kzalloc(sizeof (gpt_header), GFP_KERNEL);
if (!gpt)
return NULL;
- memset(gpt, 0, sizeof (gpt_header));
if (read_lba(bdev, lba, (u8 *) gpt,
sizeof (gpt_header)) < sizeof (gpt_header)) {
@@ -526,9 +524,8 @@
lastlba = last_lba(bdev);
if (!force_gpt) {
/* This will be added to the EFI Spec. per Intel after v1.02. */
- legacymbr = kmalloc(sizeof (*legacymbr), GFP_KERNEL);
+ legacymbr = kzalloc(sizeof (*legacymbr), GFP_KERNEL);
if (legacymbr) {
- memset(legacymbr, 0, sizeof (*legacymbr));
read_lba(bdev, 0, (u8 *) legacymbr,
sizeof (*legacymbr));
good_pmbr = is_pmbr_valid(legacymbr, lastlba);
diff --git a/fs/pipe.c b/fs/pipe.c
index 2035257..f3b6f71 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -879,7 +879,6 @@
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- inode->i_blksize = PAGE_SIZE;
return inode;
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 146a434..987c773 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -28,6 +28,7 @@
(vmi)->largest_chunk = 0; \
} while(0)
+extern int nommu_vma_show(struct seq_file *, struct vm_area_struct *);
#endif
extern void create_seq_entry(char *name, mode_t mode, const struct file_operations *f);
diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c
index 6a984f6..3ceff38 100644
--- a/fs/proc/kcore.c
+++ b/fs/proc/kcore.c
@@ -279,12 +279,11 @@
tsz = elf_buflen - *fpos;
if (buflen < tsz)
tsz = buflen;
- elf_buf = kmalloc(elf_buflen, GFP_ATOMIC);
+ elf_buf = kzalloc(elf_buflen, GFP_ATOMIC);
if (!elf_buf) {
read_unlock(&kclist_lock);
return -ENOMEM;
}
- memset(elf_buf, 0, elf_buflen);
elf_kcore_store_hdr(elf_buf, nphdr, elf_buflen);
read_unlock(&kclist_lock);
if (copy_to_user(buffer, elf_buf + *fpos, tsz)) {
@@ -330,10 +329,9 @@
unsigned long curstart = start;
unsigned long cursize = tsz;
- elf_buf = kmalloc(tsz, GFP_KERNEL);
+ elf_buf = kzalloc(tsz, GFP_KERNEL);
if (!elf_buf)
return -ENOMEM;
- memset(elf_buf, 0, tsz);
read_lock(&vmlist_lock);
for (m=vmlist; m && cursize; m=m->next) {
diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index cff10ab..d7dbdf9 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c
@@ -33,19 +33,15 @@
#include "internal.h"
/*
- * display a list of all the VMAs the kernel knows about
- * - nommu kernals have a single flat list
+ * display a single VMA to a sequenced file
*/
-static int nommu_vma_list_show(struct seq_file *m, void *v)
+int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
{
- struct vm_area_struct *vma;
unsigned long ino = 0;
struct file *file;
dev_t dev = 0;
int flags, len;
- vma = rb_entry((struct rb_node *) v, struct vm_area_struct, vm_rb);
-
flags = vma->vm_flags;
file = vma->vm_file;
@@ -78,6 +74,18 @@
return 0;
}
+/*
+ * display a list of all the VMAs the kernel knows about
+ * - nommu kernals have a single flat list
+ */
+static int nommu_vma_list_show(struct seq_file *m, void *v)
+{
+ struct vm_area_struct *vma;
+
+ vma = rb_entry((struct rb_node *) v, struct vm_area_struct, vm_rb);
+ return nommu_vma_show(m, vma);
+}
+
static void *nommu_vma_list_start(struct seq_file *m, loff_t *_pos)
{
struct rb_node *_rb;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 0a163a4..6b769af 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -122,11 +122,6 @@
unsigned long private_dirty;
};
-__attribute__((weak)) const char *arch_vma_name(struct vm_area_struct *vma)
-{
- return NULL;
-}
-
static int show_map_internal(struct seq_file *m, void *v, struct mem_size_stats *mss)
{
struct proc_maps_private *priv = m->private;
diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
index 4616ed5..091aa8e 100644
--- a/fs/proc/task_nommu.c
+++ b/fs/proc/task_nommu.c
@@ -138,25 +138,63 @@
}
/*
- * Albert D. Cahalan suggested to fake entries for the traditional
- * sections here. This might be worth investigating.
+ * display mapping lines for a particular process's /proc/pid/maps
*/
-static int show_map(struct seq_file *m, void *v)
+static int show_map(struct seq_file *m, void *_vml)
{
- return 0;
+ struct vm_list_struct *vml = _vml;
+ return nommu_vma_show(m, vml->vma);
}
+
static void *m_start(struct seq_file *m, loff_t *pos)
{
+ struct proc_maps_private *priv = m->private;
+ struct vm_list_struct *vml;
+ struct mm_struct *mm;
+ loff_t n = *pos;
+
+ /* pin the task and mm whilst we play with them */
+ priv->task = get_pid_task(priv->pid, PIDTYPE_PID);
+ if (!priv->task)
+ return NULL;
+
+ mm = get_task_mm(priv->task);
+ if (!mm) {
+ put_task_struct(priv->task);
+ priv->task = NULL;
+ return NULL;
+ }
+
+ down_read(&mm->mmap_sem);
+
+ /* start from the Nth VMA */
+ for (vml = mm->context.vmlist; vml; vml = vml->next)
+ if (n-- == 0)
+ return vml;
return NULL;
}
-static void m_stop(struct seq_file *m, void *v)
+
+static void m_stop(struct seq_file *m, void *_vml)
{
+ struct proc_maps_private *priv = m->private;
+
+ if (priv->task) {
+ struct mm_struct *mm = priv->task->mm;
+ up_read(&mm->mmap_sem);
+ mmput(mm);
+ put_task_struct(priv->task);
+ }
}
-static void *m_next(struct seq_file *m, void *v, loff_t *pos)
+
+static void *m_next(struct seq_file *m, void *_vml, loff_t *pos)
{
- return NULL;
+ struct vm_list_struct *vml = _vml;
+
+ (*pos)++;
+ return vml ? vml->next : NULL;
}
-static struct seq_operations proc_pid_maps_op = {
+
+static struct seq_operations proc_pid_maps_ops = {
.start = m_start,
.next = m_next,
.stop = m_stop,
@@ -165,11 +203,19 @@
static int maps_open(struct inode *inode, struct file *file)
{
- int ret;
- ret = seq_open(file, &proc_pid_maps_op);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = NULL;
+ struct proc_maps_private *priv;
+ int ret = -ENOMEM;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (priv) {
+ priv->pid = proc_pid(inode);
+ ret = seq_open(file, &proc_pid_maps_ops);
+ if (!ret) {
+ struct seq_file *m = file->private_data;
+ m->private = priv;
+ } else {
+ kfree(priv);
+ }
}
return ret;
}
@@ -178,6 +224,6 @@
.open = maps_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index 5a90349..5a41db2 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -358,11 +358,10 @@
const char *errmsg;
struct qnx4_sb_info *qs;
- qs = kmalloc(sizeof(struct qnx4_sb_info), GFP_KERNEL);
+ qs = kzalloc(sizeof(struct qnx4_sb_info), GFP_KERNEL);
if (!qs)
return -ENOMEM;
s->s_fs_info = qs;
- memset(qs, 0, sizeof(struct qnx4_sb_info));
sb_set_blocksize(s, QNX4_BLOCK_SIZE);
@@ -497,7 +496,6 @@
inode->i_ctime.tv_sec = le32_to_cpu(raw_inode->di_ctime);
inode->i_ctime.tv_nsec = 0;
inode->i_blocks = le32_to_cpu(raw_inode->di_first_xtnt.xtnt_size);
- inode->i_blksize = QNX4_DIR_ENTRY_SIZE;
memcpy(qnx4_inode, raw_inode, QNX4_DIR_ENTRY_SIZE);
if (S_ISREG(inode->i_mode)) {
@@ -557,9 +555,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(qnx4_inode_cachep))
- printk(KERN_INFO
- "qnx4_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(qnx4_inode_cachep);
}
static int qnx4_get_sb(struct file_system_type *fs_type,
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index b967733..bc0e516 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -58,7 +58,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_mapping->a_ops = &ramfs_aops;
inode->i_mapping->backing_dev_info = &ramfs_backing_dev_info;
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 52f1e21..8810fda 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -17,8 +17,6 @@
#include <linux/writeback.h>
#include <linux/quotaops.h>
-extern int reiserfs_default_io_size; /* default io size devuned in super.c */
-
static int reiserfs_commit_write(struct file *f, struct page *page,
unsigned from, unsigned to);
static int reiserfs_prepare_write(struct file *f, struct page *page,
@@ -1122,7 +1120,6 @@
ih = PATH_PITEM_HEAD(path);
copy_key(INODE_PKEY(inode), &(ih->ih_key));
- inode->i_blksize = reiserfs_default_io_size;
INIT_LIST_HEAD(&(REISERFS_I(inode)->i_prealloc_list));
REISERFS_I(inode)->i_flags = 0;
@@ -1877,7 +1874,6 @@
}
// these do not go to on-disk stat data
inode->i_ino = le32_to_cpu(ih.ih_key.k_objectid);
- inode->i_blksize = reiserfs_default_io_size;
// store in in-core inode the key of stat data and version all
// object items will have (directory items will have old offset
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 5567328..b40d4d6 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -530,9 +530,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(reiserfs_inode_cachep))
- reiserfs_warning(NULL,
- "reiserfs_inode_cache: not all structures were freed");
+ kmem_cache_destroy(reiserfs_inode_cachep);
}
/* we don't mark inodes dirty, we just log them */
@@ -725,12 +723,6 @@
{NULL, 0, 0},
};
-int reiserfs_default_io_size = 128 * 1024; /* Default recommended I/O size is 128k.
- There might be broken applications that are
- confused by this. Use nolargeio mount option
- to get usual i/o size = PAGE_SIZE.
- */
-
/* proceed only one option from a list *cur - string containing of mount options
opts - array of options which are accepted
opt_arg - if option is found and requires an argument and if it is specifed
@@ -959,19 +951,8 @@
}
if (c == 'w') {
- char *p = NULL;
- int val = simple_strtoul(arg, &p, 0);
-
- if (*p != '\0') {
- reiserfs_warning(s,
- "reiserfs_parse_options: non-numeric value %s for nolargeio option",
- arg);
- return 0;
- }
- if (val)
- reiserfs_default_io_size = PAGE_SIZE;
- else
- reiserfs_default_io_size = 128 * 1024;
+ reiserfs_warning(s, "reiserfs: nolargeio option is no longer supported");
+ return 0;
}
if (c == 'j') {
diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c
index 22eed61..ddcd9e1 100644
--- a/fs/romfs/inode.c
+++ b/fs/romfs/inode.c
@@ -589,8 +589,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(romfs_inode_cachep))
- printk(KERN_INFO "romfs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(romfs_inode_cachep);
}
static int romfs_remount(struct super_block *sb, int *flags, char *data)
diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c
index a1ed657..2c122ee 100644
--- a/fs/smbfs/inode.c
+++ b/fs/smbfs/inode.c
@@ -89,8 +89,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(smb_inode_cachep))
- printk(KERN_INFO "smb_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(smb_inode_cachep);
}
static int smb_remount(struct super_block *sb, int *flags, char *data)
@@ -167,7 +166,6 @@
fattr->f_mtime = inode->i_mtime;
fattr->f_ctime = inode->i_ctime;
fattr->f_atime = inode->i_atime;
- fattr->f_blksize= inode->i_blksize;
fattr->f_blocks = inode->i_blocks;
fattr->attr = SMB_I(inode)->attr;
@@ -201,7 +199,6 @@
inode->i_uid = fattr->f_uid;
inode->i_gid = fattr->f_gid;
inode->i_ctime = fattr->f_ctime;
- inode->i_blksize= fattr->f_blksize;
inode->i_blocks = fattr->f_blocks;
inode->i_size = fattr->f_size;
inode->i_mtime = fattr->f_mtime;
diff --git a/fs/smbfs/proc.c b/fs/smbfs/proc.c
index c349505..40e174d 100644
--- a/fs/smbfs/proc.c
+++ b/fs/smbfs/proc.c
@@ -1826,7 +1826,6 @@
fattr->f_nlink = 1;
fattr->f_uid = server->mnt->uid;
fattr->f_gid = server->mnt->gid;
- fattr->f_blksize = SMB_ST_BLKSIZE;
fattr->f_unix = 0;
}
diff --git a/fs/smbfs/request.c b/fs/smbfs/request.c
index c8e9619..0fb7469 100644
--- a/fs/smbfs/request.c
+++ b/fs/smbfs/request.c
@@ -49,8 +49,7 @@
void smb_destroy_request_cache(void)
{
- if (kmem_cache_destroy(req_cachep))
- printk(KERN_INFO "smb_destroy_request_cache: not all structures were freed\n");
+ kmem_cache_destroy(req_cachep);
}
/*
diff --git a/fs/stat.c b/fs/stat.c
index 3a44dcf..60a31d5 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -14,6 +14,7 @@
#include <linux/namei.h>
#include <linux/security.h>
#include <linux/syscalls.h>
+#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
@@ -32,7 +33,7 @@
stat->ctime = inode->i_ctime;
stat->size = i_size_read(inode);
stat->blocks = inode->i_blocks;
- stat->blksize = inode->i_blksize;
+ stat->blksize = (1 << inode->i_blkbits);
}
EXPORT_SYMBOL(generic_fillattr);
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index c16a93c..98022e4 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -10,6 +10,7 @@
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/kernel.h>
#include <linux/kobject.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -176,7 +177,6 @@
* sysfs_create_bin_file - create binary file for object.
* @kobj: object.
* @attr: attribute descriptor.
- *
*/
int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr)
@@ -191,13 +191,16 @@
* sysfs_remove_bin_file - remove binary file for object.
* @kobj: object.
* @attr: attribute descriptor.
- *
*/
-int sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr)
+void sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr)
{
- sysfs_hash_and_remove(kobj->dentry,attr->attr.name);
- return 0;
+ if (sysfs_hash_and_remove(kobj->dentry, attr->attr.name) < 0) {
+ printk(KERN_ERR "%s: "
+ "bad dentry or inode or no such file: \"%s\"\n",
+ __FUNCTION__, attr->attr.name);
+ dump_stack();
+ }
}
EXPORT_SYMBOL_GPL(sysfs_create_bin_file);
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 61c4243..5f3d725 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -43,7 +43,7 @@
memset(sd, 0, sizeof(*sd));
atomic_set(&sd->s_count, 1);
- atomic_set(&sd->s_event, 0);
+ atomic_set(&sd->s_event, 1);
INIT_LIST_HEAD(&sd->s_children);
list_add(&sd->s_sibling, &parent_sd->s_children);
sd->s_element = element;
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 9889e54..e79e38d 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -12,6 +12,7 @@
#include <linux/namei.h>
#include <linux/backing-dev.h>
#include <linux/capability.h>
+#include <linux/errno.h>
#include "sysfs.h"
extern struct super_block * sysfs_sb;
@@ -124,7 +125,6 @@
{
struct inode * inode = new_inode(sysfs_sb);
if (inode) {
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_mapping->a_ops = &sysfs_aops;
inode->i_mapping->backing_dev_info = &sysfs_backing_dev_info;
@@ -234,17 +234,18 @@
}
}
-void sysfs_hash_and_remove(struct dentry * dir, const char * name)
+int sysfs_hash_and_remove(struct dentry * dir, const char * name)
{
struct sysfs_dirent * sd;
struct sysfs_dirent * parent_sd;
+ int found = 0;
if (!dir)
- return;
+ return -ENOENT;
if (dir->d_inode == NULL)
/* no inode means this hasn't been made visible yet */
- return;
+ return -ENOENT;
parent_sd = dir->d_fsdata;
mutex_lock(&dir->d_inode->i_mutex);
@@ -255,8 +256,11 @@
list_del_init(&sd->s_sibling);
sysfs_drop_dentry(sd, dir);
sysfs_put(sd);
+ found = 1;
break;
}
}
mutex_unlock(&dir->d_inode->i_mutex);
+
+ return found ? 0 : -ENOENT;
}
diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c
index d2eac3c..f50e3cc 100644
--- a/fs/sysfs/symlink.c
+++ b/fs/sysfs/symlink.c
@@ -3,6 +3,7 @@
*/
#include <linux/fs.h>
+#include <linux/mount.h>
#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/namei.h>
@@ -82,10 +83,19 @@
*/
int sysfs_create_link(struct kobject * kobj, struct kobject * target, const char * name)
{
- struct dentry * dentry = kobj->dentry;
+ struct dentry *dentry = NULL;
int error = -EEXIST;
- BUG_ON(!kobj || !kobj->dentry || !name);
+ BUG_ON(!name);
+
+ if (!kobj) {
+ if (sysfs_mount && sysfs_mount->mnt_sb)
+ dentry = sysfs_mount->mnt_sb->s_root;
+ } else
+ dentry = kobj->dentry;
+
+ if (!dentry)
+ return -EFAULT;
mutex_lock(&dentry->d_inode->i_mutex);
if (!sysfs_dirent_exist(dentry->d_fsdata, name))
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index 3651ffb..6f3d6bd 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -10,7 +10,7 @@
umode_t, int);
extern int sysfs_add_file(struct dentry *, const struct attribute *, int);
-extern void sysfs_hash_and_remove(struct dentry * dir, const char * name);
+extern int sysfs_hash_and_remove(struct dentry * dir, const char * name);
extern struct sysfs_dirent *sysfs_find(struct sysfs_dirent *dir, const char * name);
extern int sysfs_create_subdir(struct kobject *, const char *, struct dentry **);
diff --git a/fs/sysv/ialloc.c b/fs/sysv/ialloc.c
index 9b585d1..115ab0d 100644
--- a/fs/sysv/ialloc.c
+++ b/fs/sysv/ialloc.c
@@ -170,7 +170,7 @@
inode->i_uid = current->fsuid;
inode->i_ino = fs16_to_cpu(sbi, ino);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
- inode->i_blocks = inode->i_blksize = 0;
+ inode->i_blocks = 0;
memset(SYSV_I(inode)->i_data, 0, sizeof(SYSV_I(inode)->i_data));
SYSV_I(inode)->i_dir_start_lookup = 0;
insert_inode_hash(inode);
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 58b2d22..d63c5e4 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -201,7 +201,7 @@
inode->i_ctime.tv_nsec = 0;
inode->i_atime.tv_nsec = 0;
inode->i_mtime.tv_nsec = 0;
- inode->i_blocks = inode->i_blksize = 0;
+ inode->i_blocks = 0;
si = SYSV_I(inode);
for (block = 0; block < 10+1+1+1; block++)
diff --git a/fs/sysv/super.c b/fs/sysv/super.c
index 876639b..350cba5 100644
--- a/fs/sysv/super.c
+++ b/fs/sysv/super.c
@@ -369,10 +369,9 @@
if (64 != sizeof (struct sysv_inode))
panic("sysv fs: bad inode size");
- sbi = kmalloc(sizeof(struct sysv_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct sysv_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
- memset(sbi, 0, sizeof(struct sysv_sb_info));
sbi->s_sb = sb;
sbi->s_block_base = 0;
@@ -453,10 +452,9 @@
if (64 != sizeof (struct sysv_inode))
panic("sysv fs: bad i-node size");
- sbi = kmalloc(sizeof(struct sysv_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct sysv_sb_info), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
- memset(sbi, 0, sizeof(struct sysv_sb_info));
sbi->s_sb = sb;
sbi->s_block_base = 0;
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index 3332347..8206983 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -121,7 +121,6 @@
UDF_I_LOCATION(inode).logicalBlockNum = block;
UDF_I_LOCATION(inode).partitionReferenceNum = UDF_I_LOCATION(dir).partitionReferenceNum;
inode->i_ino = udf_get_lb_pblock(sb, UDF_I_LOCATION(inode), 0);
- inode->i_blksize = PAGE_SIZE;
inode->i_blocks = 0;
UDF_I_LENEATTR(inode) = 0;
UDF_I_LENALLOC(inode) = 0;
@@ -130,14 +129,12 @@
{
UDF_I_EFE(inode) = 1;
UDF_UPDATE_UDFREV(inode->i_sb, UDF_VERS_USE_EXTENDED_FE);
- UDF_I_DATA(inode) = kmalloc(inode->i_sb->s_blocksize - sizeof(struct extendedFileEntry), GFP_KERNEL);
- memset(UDF_I_DATA(inode), 0x00, inode->i_sb->s_blocksize - sizeof(struct extendedFileEntry));
+ UDF_I_DATA(inode) = kzalloc(inode->i_sb->s_blocksize - sizeof(struct extendedFileEntry), GFP_KERNEL);
}
else
{
UDF_I_EFE(inode) = 0;
- UDF_I_DATA(inode) = kmalloc(inode->i_sb->s_blocksize - sizeof(struct fileEntry), GFP_KERNEL);
- memset(UDF_I_DATA(inode), 0x00, inode->i_sb->s_blocksize - sizeof(struct fileEntry));
+ UDF_I_DATA(inode) = kzalloc(inode->i_sb->s_blocksize - sizeof(struct fileEntry), GFP_KERNEL);
}
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
UDF_I_ALLOCTYPE(inode) = ICBTAG_FLAG_AD_IN_ICB;
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 605f511..b223b32 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -916,8 +916,6 @@
* i_nlink = 1
* i_op = NULL;
*/
- inode->i_blksize = PAGE_SIZE;
-
bh = udf_read_ptagged(inode->i_sb, UDF_I_LOCATION(inode), 0, &ident);
if (!bh)
diff --git a/fs/udf/super.c b/fs/udf/super.c
index fcce1a2..5dd356c 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -156,8 +156,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(udf_inode_cachep))
- printk(KERN_INFO "udf_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(udf_inode_cachep);
}
/* Superblock operations */
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 9501dcd..2ad1259 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -255,7 +255,6 @@
inode->i_gid = current->fsgid;
inode->i_ino = cg * uspi->s_ipg + bit;
- inode->i_blksize = PAGE_SIZE; /* This is the optimal IO size (for stat), not the fs block size */
inode->i_blocks = 0;
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
ufsi->i_flags = UFS_I(dir)->i_flags;
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 30c6e8a9..ee1eaa6 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -741,7 +741,6 @@
ufs1_read_inode(inode, ufs_inode + ufs_inotofsbo(inode->i_ino));
}
- inode->i_blksize = PAGE_SIZE;/*This is the optimal IO size (for stat)*/
inode->i_version++;
ufsi->i_lastfrag =
(inode->i_size + uspi->s_fsize - 1) >> uspi->s_fshift;
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 992ee0b..ec79e30 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -611,11 +611,10 @@
UFSD("ENTER\n");
- sbi = kmalloc(sizeof(struct ufs_sb_info), GFP_KERNEL);
+ sbi = kzalloc(sizeof(struct ufs_sb_info), GFP_KERNEL);
if (!sbi)
goto failed_nomem;
sb->s_fs_info = sbi;
- memset(sbi, 0, sizeof(struct ufs_sb_info));
UFSD("flag %u\n", (int)(sb->s_flags & MS_RDONLY));
@@ -1245,8 +1244,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(ufs_inode_cachep))
- printk(KERN_INFO "ufs_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(ufs_inode_cachep);
}
#ifdef CONFIG_QUOTA
diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h
index 939bd84..0e8293c 100644
--- a/fs/xfs/linux-2.6/kmem.h
+++ b/fs/xfs/linux-2.6/kmem.h
@@ -91,8 +91,8 @@
static inline void
kmem_zone_destroy(kmem_zone_t *zone)
{
- if (zone && kmem_cache_destroy(zone))
- BUG();
+ if (zone)
+ kmem_cache_destroy(zone);
}
extern void *kmem_zone_alloc(kmem_zone_t *, unsigned int __nocast);
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 3d4f6df..41cfcba 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -370,7 +370,7 @@
/* Try fairly hard to get memory */
do {
- if ((read_buf = (caddr_t)kmalloc(rlen, GFP_KERNEL)))
+ if ((read_buf = kmalloc(rlen, GFP_KERNEL)))
break;
rlen >>= 1;
} while (rlen >= 1024);
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index d918002..22e3b71 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -553,13 +553,13 @@
ASSERT(dentry);
ASSERT(nd);
- link = (char *)kmalloc(MAXPATHLEN+1, GFP_KERNEL);
+ link = kmalloc(MAXPATHLEN+1, GFP_KERNEL);
if (!link) {
nd_set_link(nd, ERR_PTR(-ENOMEM));
return NULL;
}
- uio = (uio_t *)kmalloc(sizeof(uio_t), GFP_KERNEL);
+ uio = kmalloc(sizeof(uio_t), GFP_KERNEL);
if (!uio) {
kfree(link);
nd_set_link(nd, ERR_PTR(-ENOMEM));
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 4754f34..9df9ed3 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -171,7 +171,6 @@
break;
}
- inode->i_blksize = xfs_preferred_iosize(mp);
inode->i_generation = ip->i_d.di_gen;
i_size_write(inode, ip->i_d.di_size);
inode->i_blocks =
diff --git a/fs/xfs/linux-2.6/xfs_vnode.c b/fs/xfs/linux-2.6/xfs_vnode.c
index 6628d96..553fa73 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.c
+++ b/fs/xfs/linux-2.6/xfs_vnode.c
@@ -122,7 +122,6 @@
inode->i_blocks = vap->va_nblocks;
inode->i_mtime = vap->va_mtime;
inode->i_ctime = vap->va_ctime;
- inode->i_blksize = vap->va_blocksize;
if (vap->va_xflags & XFS_XFLAG_IMMUTABLE)
inode->i_flags |= S_IMMUTABLE;
else
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
index 30548a3..121cd24 100644
--- a/include/asm-arm/arch-pxa/udc.h
+++ b/include/asm-arm/arch-pxa/udc.h
@@ -12,6 +12,14 @@
void (*udc_command)(int cmd);
#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */
#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */
+
+ /* Boards following the design guidelines in the developer's manual,
+ * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
+ * VBUS IRQ and omit the methods above. Store the GPIO number
+ * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
+ */
+ u16 gpio_vbus; /* high == vbus present */
+ u16 gpio_pullup; /* high == pullup activated */
};
extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index 1e891f8..2ab4078 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -377,6 +377,7 @@
#endif
#ifdef __KERNEL__
+#include <linux/err.h>
#include <linux/linkage.h>
#define __sys2(x) #x
@@ -396,7 +397,7 @@
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-129)) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
errno = -(res); \
res = -1; \
} \
diff --git a/include/asm-arm26/unistd.h b/include/asm-arm26/unistd.h
index 70eb6d9..c6d2436 100644
--- a/include/asm-arm26/unistd.h
+++ b/include/asm-arm26/unistd.h
@@ -311,6 +311,7 @@
#define __ARM_NR_usr26 (__ARM_NR_BASE+3)
#ifdef __KERNEL__
+#include <linux/err.h>
#include <linux/linkage.h>
#define __sys2(x) #x
@@ -322,7 +323,7 @@
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+ if ((unsigned long)(res) >= (unsigned long)-MAX_ERRNO) { \
errno = -(res); \
res = -1; \
} \
diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h
index b80dbd8..d104d1b 100644
--- a/include/asm-frv/unistd.h
+++ b/include/asm-frv/unistd.h
@@ -320,6 +320,7 @@
#ifdef __KERNEL__
#define NR_syscalls 310
+#include <linux/err.h>
/*
* process the return value of a syscall, consigning it to one of two possible fates
@@ -329,7 +330,7 @@
#define __syscall_return(type, res) \
do { \
unsigned long __sr2 = (res); \
- if (__builtin_expect(__sr2 >= (unsigned long)(-4095), 0)) { \
+ if (__builtin_expect(__sr2 >= (unsigned long)(-MAX_ERRNO), 0)) { \
errno = (-__sr2); \
__sr2 = ~0UL; \
} \
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 253ae13..69240b5 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -118,15 +118,15 @@
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
*(__ksymtab_strings) \
} \
- __end_rodata = .; \
- . = ALIGN(4096); \
\
/* Built-in module parameters. */ \
__param : AT(ADDR(__param) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___param) = .; \
*(__param) \
VMLINUX_SYMBOL(__stop___param) = .; \
- }
+ } \
+ __end_rodata = .; \
+ . = ALIGN(4096);
#define SECURITY_INIT \
.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
diff --git a/include/asm-h8300/unistd.h b/include/asm-h8300/unistd.h
index 226dd59..a2dd904 100644
--- a/include/asm-h8300/unistd.h
+++ b/include/asm-h8300/unistd.h
@@ -295,14 +295,14 @@
#ifdef __KERNEL__
#define NR_syscalls 289
+#include <linux/err.h>
-
-/* user-visible error numbers are in the range -1 - -122: see
+/* user-visible error numbers are in the range -1 - -MAX_ERRNO: see
<asm-m68k/errno.h> */
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
/* avoid using res which is declared to be in register d0; \
errno might expand to a function call and clobber it. */ \
int __err = -(res); \
diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h
index 20f5239..6016632 100644
--- a/include/asm-i386/acpi.h
+++ b/include/asm-i386/acpi.h
@@ -131,21 +131,7 @@
extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
#ifdef CONFIG_X86_IO_APIC
-extern int skip_ioapic_setup;
extern int acpi_skip_timer_override;
-
-static inline void disable_ioapic_setup(void)
-{
- skip_ioapic_setup = 1;
-}
-
-static inline int ioapic_setup_disabled(void)
-{
- return skip_ioapic_setup;
-}
-
-#else
-static inline void disable_ioapic_setup(void) { }
#endif
static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
diff --git a/include/asm-i386/alternative-asm.i b/include/asm-i386/alternative-asm.i
new file mode 100644
index 0000000..6c47e3b
--- /dev/null
+++ b/include/asm-i386/alternative-asm.i
@@ -0,0 +1,14 @@
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+ .macro LOCK_PREFIX
+1: lock
+ .section .smp_locks,"a"
+ .align 4
+ .long 1b
+ .previous
+ .endm
+#else
+ .macro LOCK_PREFIX
+ .endm
+#endif
diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h
index 2c1e371..3a42b7d 100644
--- a/include/asm-i386/apic.h
+++ b/include/asm-i386/apic.h
@@ -16,20 +16,8 @@
#define APIC_VERBOSE 1
#define APIC_DEBUG 2
-extern int enable_local_apic;
extern int apic_verbosity;
-static inline void lapic_disable(void)
-{
- enable_local_apic = -1;
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
-}
-
-static inline void lapic_enable(void)
-{
- enable_local_apic = 1;
-}
-
/*
* Define the default level of output to be very little
* This can be turned up by using apic=verbose for more
@@ -42,6 +30,8 @@
} while (0)
+extern void generic_apic_probe(void);
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
@@ -117,8 +107,6 @@
extern void enable_NMI_through_LVT0 (void * dummy);
-extern int disable_timer_pin_1;
-
void smp_send_timer_broadcast_ipi(struct pt_regs *regs);
void switch_APIC_timer_to_ipi(void *cpumask);
void switch_ipi_to_APIC_timer(void *cpumask);
diff --git a/include/asm-i386/desc.h b/include/asm-i386/desc.h
index 89b8b82..5874ef1 100644
--- a/include/asm-i386/desc.h
+++ b/include/asm-i386/desc.h
@@ -33,50 +33,99 @@
return (struct desc_struct *)per_cpu(cpu_gdt_descr, cpu).address;
}
-#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8))
-#define load_LDT_desc() __asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8))
-
-#define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr))
-#define load_idt(dtr) __asm__ __volatile("lidt %0"::"m" (*dtr))
-#define load_tr(tr) __asm__ __volatile("ltr %0"::"mr" (tr))
-#define load_ldt(ldt) __asm__ __volatile("lldt %0"::"mr" (ldt))
-
-#define store_gdt(dtr) __asm__ ("sgdt %0":"=m" (*dtr))
-#define store_idt(dtr) __asm__ ("sidt %0":"=m" (*dtr))
-#define store_tr(tr) __asm__ ("str %0":"=mr" (tr))
-#define store_ldt(ldt) __asm__ ("sldt %0":"=mr" (ldt))
-
/*
* This is the ldt that every process will get unless we need
* something other than this.
*/
extern struct desc_struct default_ldt[];
+extern struct desc_struct idt_table[];
extern void set_intr_gate(unsigned int irq, void * addr);
-#define _set_tssldt_desc(n,addr,limit,type) \
-__asm__ __volatile__ ("movw %w3,0(%2)\n\t" \
- "movw %w1,2(%2)\n\t" \
- "rorl $16,%1\n\t" \
- "movb %b1,4(%2)\n\t" \
- "movb %4,5(%2)\n\t" \
- "movb $0,6(%2)\n\t" \
- "movb %h1,7(%2)\n\t" \
- "rorl $16,%1" \
- : "=m"(*(n)) : "q" (addr), "r"(n), "ir"(limit), "i"(type))
-
-static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, void *addr)
+static inline void pack_descriptor(__u32 *a, __u32 *b,
+ unsigned long base, unsigned long limit, unsigned char type, unsigned char flags)
{
- _set_tssldt_desc(&get_cpu_gdt_table(cpu)[entry], (int)addr,
- offsetof(struct tss_struct, __cacheline_filler) - 1, 0x89);
+ *a = ((base & 0xffff) << 16) | (limit & 0xffff);
+ *b = (base & 0xff000000) | ((base & 0xff0000) >> 16) |
+ (limit & 0x000f0000) | ((type & 0xff) << 8) | ((flags & 0xf) << 20);
+}
+
+static inline void pack_gate(__u32 *a, __u32 *b,
+ unsigned long base, unsigned short seg, unsigned char type, unsigned char flags)
+{
+ *a = (seg << 16) | (base & 0xffff);
+ *b = (base & 0xffff0000) | ((type & 0xff) << 8) | (flags & 0xff);
+}
+
+#define DESCTYPE_LDT 0x82 /* present, system, DPL-0, LDT */
+#define DESCTYPE_TSS 0x89 /* present, system, DPL-0, 32-bit TSS */
+#define DESCTYPE_TASK 0x85 /* present, system, DPL-0, task gate */
+#define DESCTYPE_INT 0x8e /* present, system, DPL-0, interrupt gate */
+#define DESCTYPE_TRAP 0x8f /* present, system, DPL-0, trap gate */
+#define DESCTYPE_DPL3 0x60 /* DPL-3 */
+#define DESCTYPE_S 0x10 /* !system */
+
+#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8))
+#define load_LDT_desc() __asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8))
+
+#define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr))
+#define load_idt(dtr) __asm__ __volatile("lidt %0"::"m" (*dtr))
+#define load_tr(tr) __asm__ __volatile("ltr %0"::"m" (tr))
+#define load_ldt(ldt) __asm__ __volatile("lldt %0"::"m" (ldt))
+
+#define store_gdt(dtr) __asm__ ("sgdt %0":"=m" (*dtr))
+#define store_idt(dtr) __asm__ ("sidt %0":"=m" (*dtr))
+#define store_tr(tr) __asm__ ("str %0":"=m" (tr))
+#define store_ldt(ldt) __asm__ ("sldt %0":"=m" (ldt))
+
+#if TLS_SIZE != 24
+# error update this code.
+#endif
+
+static inline void load_TLS(struct thread_struct *t, unsigned int cpu)
+{
+#define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]
+ C(0); C(1); C(2);
+#undef C
+}
+
+static inline void write_dt_entry(void *dt, int entry, __u32 entry_a, __u32 entry_b)
+{
+ __u32 *lp = (__u32 *)((char *)dt + entry*8);
+ *lp = entry_a;
+ *(lp+1) = entry_b;
+}
+
+#define write_ldt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b)
+#define write_gdt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b)
+#define write_idt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b)
+
+static inline void _set_gate(int gate, unsigned int type, void *addr, unsigned short seg)
+{
+ __u32 a, b;
+ pack_gate(&a, &b, (unsigned long)addr, seg, type, 0);
+ write_idt_entry(idt_table, gate, a, b);
+}
+
+static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, const void *addr)
+{
+ __u32 a, b;
+ pack_descriptor(&a, &b, (unsigned long)addr,
+ offsetof(struct tss_struct, __cacheline_filler) - 1,
+ DESCTYPE_TSS, 0);
+ write_gdt_entry(get_cpu_gdt_table(cpu), entry, a, b);
+}
+
+static inline void set_ldt_desc(unsigned int cpu, void *addr, unsigned int entries)
+{
+ __u32 a, b;
+ pack_descriptor(&a, &b, (unsigned long)addr,
+ entries * sizeof(struct desc_struct) - 1,
+ DESCTYPE_LDT, 0);
+ write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, a, b);
}
#define set_tss_desc(cpu,addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr)
-static inline void set_ldt_desc(unsigned int cpu, void *addr, unsigned int size)
-{
- _set_tssldt_desc(&get_cpu_gdt_table(cpu)[GDT_ENTRY_LDT], (int)addr, ((size << 3)-1), 0x82);
-}
-
#define LDT_entry_a(info) \
((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
@@ -102,24 +151,6 @@
(info)->seg_not_present == 1 && \
(info)->useable == 0 )
-static inline void write_ldt_entry(void *ldt, int entry, __u32 entry_a, __u32 entry_b)
-{
- __u32 *lp = (__u32 *)((char *)ldt + entry*8);
- *lp = entry_a;
- *(lp+1) = entry_b;
-}
-
-#if TLS_SIZE != 24
-# error update this code.
-#endif
-
-static inline void load_TLS(struct thread_struct *t, unsigned int cpu)
-{
-#define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]
- C(0); C(1); C(2);
-#undef C
-}
-
static inline void clear_LDT(void)
{
int cpu = get_cpu();
diff --git a/include/asm-i386/dwarf2.h b/include/asm-i386/dwarf2.h
index 2280f62..6d66398 100644
--- a/include/asm-i386/dwarf2.h
+++ b/include/asm-i386/dwarf2.h
@@ -1,8 +1,6 @@
#ifndef _DWARF2_H
#define _DWARF2_H
-#include <linux/config.h>
-
#ifndef __ASSEMBLY__
#warning "asm/dwarf2.h should be only included in pure assembly files"
#endif
@@ -28,6 +26,13 @@
#define CFI_RESTORE .cfi_restore
#define CFI_REMEMBER_STATE .cfi_remember_state
#define CFI_RESTORE_STATE .cfi_restore_state
+#define CFI_UNDEFINED .cfi_undefined
+
+#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
+#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#else
+#define CFI_SIGNAL_FRAME
+#endif
#else
@@ -48,6 +53,8 @@
#define CFI_RESTORE ignore
#define CFI_REMEMBER_STATE ignore
#define CFI_RESTORE_STATE ignore
+#define CFI_UNDEFINED ignore
+#define CFI_SIGNAL_FRAME ignore
#endif
diff --git a/include/asm-i386/e820.h b/include/asm-i386/e820.h
index ca82acb..f7514fb 100644
--- a/include/asm-i386/e820.h
+++ b/include/asm-i386/e820.h
@@ -18,7 +18,7 @@
#define E820_RAM 1
#define E820_RESERVED 2
-#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */
+#define E820_ACPI 3
#define E820_NVS 4
#define HIGH_MEMORY (1024*1024)
diff --git a/include/asm-i386/frame.i b/include/asm-i386/frame.i
new file mode 100644
index 0000000..4d68ddc
--- /dev/null
+++ b/include/asm-i386/frame.i
@@ -0,0 +1,24 @@
+#include <linux/config.h>
+#include <asm/dwarf2.h>
+
+/* The annotation hides the frame from the unwinder and makes it look
+ like a ordinary ebp save/restore. This avoids some special cases for
+ frame pointer later */
+#ifdef CONFIG_FRAME_POINTER
+ .macro FRAME
+ pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebp,0
+ movl %esp,%ebp
+ .endm
+ .macro ENDFRAME
+ popl %ebp
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ebp
+ .endm
+#else
+ .macro FRAME
+ .endm
+ .macro ENDFRAME
+ .endm
+#endif
diff --git a/include/asm-i386/genapic.h b/include/asm-i386/genapic.h
index b3783a3..8ffbb0f 100644
--- a/include/asm-i386/genapic.h
+++ b/include/asm-i386/genapic.h
@@ -1,6 +1,8 @@
#ifndef _ASM_GENAPIC_H
#define _ASM_GENAPIC_H 1
+#include <asm/mpspec.h>
+
/*
* Generic APIC driver interface.
*
@@ -63,14 +65,25 @@
unsigned (*get_apic_id)(unsigned long x);
unsigned long apic_id_mask;
unsigned int (*cpu_mask_to_apicid)(cpumask_t cpumask);
-
+
+#ifdef CONFIG_SMP
/* ipi */
void (*send_IPI_mask)(cpumask_t mask, int vector);
void (*send_IPI_allbutself)(int vector);
void (*send_IPI_all)(int vector);
+#endif
};
-#define APICFUNC(x) .x = x
+#define APICFUNC(x) .x = x,
+
+/* More functions could be probably marked IPIFUNC and save some space
+ in UP GENERICARCH kernels, but I don't have the nerve right now
+ to untangle this mess. -AK */
+#ifdef CONFIG_SMP
+#define IPIFUNC(x) APICFUNC(x)
+#else
+#define IPIFUNC(x)
+#endif
#define APIC_INIT(aname, aprobe) { \
.name = aname, \
@@ -80,33 +93,33 @@
.no_balance_irq = NO_BALANCE_IRQ, \
.ESR_DISABLE = esr_disable, \
.apic_destination_logical = APIC_DEST_LOGICAL, \
- APICFUNC(apic_id_registered), \
- APICFUNC(target_cpus), \
- APICFUNC(check_apicid_used), \
- APICFUNC(check_apicid_present), \
- APICFUNC(init_apic_ldr), \
- APICFUNC(ioapic_phys_id_map), \
- APICFUNC(clustered_apic_check), \
- APICFUNC(multi_timer_check), \
- APICFUNC(apicid_to_node), \
- APICFUNC(cpu_to_logical_apicid), \
- APICFUNC(cpu_present_to_apicid), \
- APICFUNC(apicid_to_cpu_present), \
- APICFUNC(mpc_apic_id), \
- APICFUNC(setup_portio_remap), \
- APICFUNC(check_phys_apicid_present), \
- APICFUNC(mpc_oem_bus_info), \
- APICFUNC(mpc_oem_pci_bus), \
- APICFUNC(mps_oem_check), \
- APICFUNC(get_apic_id), \
+ APICFUNC(apic_id_registered) \
+ APICFUNC(target_cpus) \
+ APICFUNC(check_apicid_used) \
+ APICFUNC(check_apicid_present) \
+ APICFUNC(init_apic_ldr) \
+ APICFUNC(ioapic_phys_id_map) \
+ APICFUNC(clustered_apic_check) \
+ APICFUNC(multi_timer_check) \
+ APICFUNC(apicid_to_node) \
+ APICFUNC(cpu_to_logical_apicid) \
+ APICFUNC(cpu_present_to_apicid) \
+ APICFUNC(apicid_to_cpu_present) \
+ APICFUNC(mpc_apic_id) \
+ APICFUNC(setup_portio_remap) \
+ APICFUNC(check_phys_apicid_present) \
+ APICFUNC(mpc_oem_bus_info) \
+ APICFUNC(mpc_oem_pci_bus) \
+ APICFUNC(mps_oem_check) \
+ APICFUNC(get_apic_id) \
.apic_id_mask = APIC_ID_MASK, \
- APICFUNC(cpu_mask_to_apicid), \
- APICFUNC(acpi_madt_oem_check), \
- APICFUNC(send_IPI_mask), \
- APICFUNC(send_IPI_allbutself), \
- APICFUNC(send_IPI_all), \
- APICFUNC(enable_apic_mode), \
- APICFUNC(phys_pkg_id), \
+ APICFUNC(cpu_mask_to_apicid) \
+ APICFUNC(acpi_madt_oem_check) \
+ IPIFUNC(send_IPI_mask) \
+ IPIFUNC(send_IPI_allbutself) \
+ IPIFUNC(send_IPI_all) \
+ APICFUNC(enable_apic_mode) \
+ APICFUNC(phys_pkg_id) \
}
extern struct genapic *genapic;
diff --git a/include/asm-i386/intel_arch_perfmon.h b/include/asm-i386/intel_arch_perfmon.h
index 134ea9c..b52cd60 100644
--- a/include/asm-i386/intel_arch_perfmon.h
+++ b/include/asm-i386/intel_arch_perfmon.h
@@ -14,6 +14,18 @@
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL (0x3c)
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK (0x00 << 8)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT (1 << 0)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX (0)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
+ (1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
+
+union cpuid10_eax {
+ struct {
+ unsigned int version_id:8;
+ unsigned int num_counters:8;
+ unsigned int bit_width:8;
+ unsigned int mask_length:8;
+ } split;
+ unsigned int full;
+};
#endif /* X86_INTEL_ARCH_PERFMON_H */
diff --git a/include/asm-i386/io_apic.h b/include/asm-i386/io_apic.h
index 5092e81..5d30927 100644
--- a/include/asm-i386/io_apic.h
+++ b/include/asm-i386/io_apic.h
@@ -188,6 +188,16 @@
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;
+static inline void disable_ioapic_setup(void)
+{
+ skip_ioapic_setup = 1;
+}
+
+static inline int ioapic_setup_disabled(void)
+{
+ return skip_ioapic_setup;
+}
+
/*
* If we use the IO-APIC for IRQ routing, disable automatic
* assignment of PCI IRQ's.
@@ -206,6 +216,7 @@
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
+static inline void disable_ioapic_setup(void) { }
#endif
extern int assign_irq_vector(int irq);
diff --git a/include/asm-i386/kexec.h b/include/asm-i386/kexec.h
index 53f0e06..4dfc9f5 100644
--- a/include/asm-i386/kexec.h
+++ b/include/asm-i386/kexec.h
@@ -1,6 +1,26 @@
#ifndef _I386_KEXEC_H
#define _I386_KEXEC_H
+#define PA_CONTROL_PAGE 0
+#define VA_CONTROL_PAGE 1
+#define PA_PGD 2
+#define VA_PGD 3
+#define PA_PTE_0 4
+#define VA_PTE_0 5
+#define PA_PTE_1 6
+#define VA_PTE_1 7
+#ifdef CONFIG_X86_PAE
+#define PA_PMD_0 8
+#define VA_PMD_0 9
+#define PA_PMD_1 10
+#define VA_PMD_1 11
+#define PAGES_NR 12
+#else
+#define PAGES_NR 8
+#endif
+
+#ifndef __ASSEMBLY__
+
#include <asm/fixmap.h>
#include <asm/ptrace.h>
#include <asm/string.h>
@@ -72,5 +92,12 @@
newregs->eip = (unsigned long)current_text_addr();
}
}
+asmlinkage NORET_TYPE void
+relocate_kernel(unsigned long indirection_page,
+ unsigned long control_page,
+ unsigned long start_address,
+ unsigned int has_pae) ATTRIB_NORET;
+
+#endif /* __ASSEMBLY__ */
#endif /* _I386_KEXEC_H */
diff --git a/include/asm-i386/mach-es7000/mach_apic.h b/include/asm-i386/mach-es7000/mach_apic.h
index b5f3f0d..2633368 100644
--- a/include/asm-i386/mach-es7000/mach_apic.h
+++ b/include/asm-i386/mach-es7000/mach_apic.h
@@ -123,9 +123,13 @@
/* Mapping from cpu number to logical apicid */
static inline int cpu_to_logical_apicid(int cpu)
{
+#ifdef CONFIG_SMP
if (cpu >= NR_CPUS)
return BAD_APICID;
return (int)cpu_2_logical_apicid[cpu];
+#else
+ return logical_smp_processor_id();
+#endif
}
static inline int mpc_apic_id(struct mpc_config_processor *m, struct mpc_config_translation *unused)
diff --git a/include/asm-i386/mach-summit/mach_apic.h b/include/asm-i386/mach-summit/mach_apic.h
index 9fd0732..a81b059 100644
--- a/include/asm-i386/mach-summit/mach_apic.h
+++ b/include/asm-i386/mach-summit/mach_apic.h
@@ -46,10 +46,12 @@
static inline void init_apic_ldr(void)
{
unsigned long val, id;
- int i, count;
- u8 lid;
+ int count = 0;
u8 my_id = (u8)hard_smp_processor_id();
u8 my_cluster = (u8)apicid_cluster(my_id);
+#ifdef CONFIG_SMP
+ u8 lid;
+ int i;
/* Create logical APIC IDs by counting CPUs already in cluster. */
for (count = 0, i = NR_CPUS; --i >= 0; ) {
@@ -57,6 +59,7 @@
if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
++count;
}
+#endif
/* We only have a 4 wide bitmap in cluster mode. If a deranged
* BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
@@ -91,9 +94,13 @@
/* Mapping from cpu number to logical apicid */
static inline int cpu_to_logical_apicid(int cpu)
{
+#ifdef CONFIG_SMP
if (cpu >= NR_CPUS)
return BAD_APICID;
return (int)cpu_2_logical_apicid[cpu];
+#else
+ return logical_smp_processor_id();
+#endif
}
static inline int cpu_present_to_apicid(int mps_cpu)
diff --git a/include/asm-i386/mutex.h b/include/asm-i386/mutex.h
index 05a5385..7a17d9e 100644
--- a/include/asm-i386/mutex.h
+++ b/include/asm-i386/mutex.h
@@ -30,14 +30,10 @@
\
__asm__ __volatile__( \
LOCK_PREFIX " decl (%%eax) \n" \
- " js 2f \n" \
+ " jns 1f \n" \
+ " call "#fail_fn" \n" \
"1: \n" \
\
- LOCK_SECTION_START("") \
- "2: call "#fail_fn" \n" \
- " jmp 1b \n" \
- LOCK_SECTION_END \
- \
:"=a" (dummy) \
: "a" (count) \
: "memory", "ecx", "edx"); \
@@ -86,14 +82,10 @@
\
__asm__ __volatile__( \
LOCK_PREFIX " incl (%%eax) \n" \
- " jle 2f \n" \
+ " jg 1f \n" \
+ " call "#fail_fn" \n" \
"1: \n" \
\
- LOCK_SECTION_START("") \
- "2: call "#fail_fn" \n" \
- " jmp 1b \n" \
- LOCK_SECTION_END \
- \
:"=a" (dummy) \
: "a" (count) \
: "memory", "ecx", "edx"); \
diff --git a/include/asm-i386/nmi.h b/include/asm-i386/nmi.h
index 67d9947..303bcd4 100644
--- a/include/asm-i386/nmi.h
+++ b/include/asm-i386/nmi.h
@@ -6,32 +6,29 @@
#include <linux/pm.h>
-struct pt_regs;
-
-typedef int (*nmi_callback_t)(struct pt_regs * regs, int cpu);
-
/**
- * set_nmi_callback
+ * do_nmi_callback
*
- * Set a handler for an NMI. Only one handler may be
- * set. Return 1 if the NMI was handled.
+ * Check to see if a callback exists and execute it. Return 1
+ * if the handler exists and was handled successfully.
*/
-void set_nmi_callback(nmi_callback_t callback);
+int do_nmi_callback(struct pt_regs *regs, int cpu);
-/**
- * unset_nmi_callback
- *
- * Remove the handler previously set.
- */
-void unset_nmi_callback(void);
+extern int nmi_watchdog_enabled;
+extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
+extern int avail_to_resrv_perfctr_nmi(unsigned int);
+extern int reserve_perfctr_nmi(unsigned int);
+extern void release_perfctr_nmi(unsigned int);
+extern int reserve_evntsel_nmi(unsigned int);
+extern void release_evntsel_nmi(unsigned int);
-extern void setup_apic_nmi_watchdog (void);
-extern int reserve_lapic_nmi(void);
-extern void release_lapic_nmi(void);
+extern void setup_apic_nmi_watchdog (void *);
+extern void stop_apic_nmi_watchdog (void *);
extern void disable_timer_nmi_watchdog(void);
extern void enable_timer_nmi_watchdog(void);
-extern void nmi_watchdog_tick (struct pt_regs * regs);
+extern int nmi_watchdog_tick (struct pt_regs * regs, unsigned reason);
+extern atomic_t nmi_active;
extern unsigned int nmi_watchdog;
#define NMI_DEFAULT -1
#define NMI_NONE 0
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index 0dc051a..541b3e2 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -411,8 +411,6 @@
static inline int set_kernel_exec(unsigned long vaddr, int enable) { return 0;}
#endif
-extern void noexec_setup(const char *str);
-
#if defined(CONFIG_HIGHPTE)
#define pte_offset_map(dir, address) \
((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
diff --git a/include/asm-i386/ptrace.h b/include/asm-i386/ptrace.h
index 1910880..a4a0e52 100644
--- a/include/asm-i386/ptrace.h
+++ b/include/asm-i386/ptrace.h
@@ -27,6 +27,7 @@
#ifdef __KERNEL__
#include <asm/vm86.h>
+#include <asm/segment.h>
struct task_struct;
extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code);
@@ -40,18 +41,14 @@
*/
static inline int user_mode(struct pt_regs *regs)
{
- return (regs->xcs & 3) != 0;
+ return (regs->xcs & SEGMENT_RPL_MASK) == USER_RPL;
}
static inline int user_mode_vm(struct pt_regs *regs)
{
- return ((regs->xcs & 3) | (regs->eflags & VM_MASK)) != 0;
+ return ((regs->xcs & SEGMENT_RPL_MASK) | (regs->eflags & VM_MASK)) >= USER_RPL;
}
#define instruction_pointer(regs) ((regs)->eip)
-#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
#endif /* __KERNEL__ */
#endif
diff --git a/include/asm-i386/rwlock.h b/include/asm-i386/rwlock.h
index 87c069c..c3e5db3 100644
--- a/include/asm-i386/rwlock.h
+++ b/include/asm-i386/rwlock.h
@@ -20,52 +20,6 @@
#define RW_LOCK_BIAS 0x01000000
#define RW_LOCK_BIAS_STR "0x01000000"
-#define __build_read_lock_ptr(rw, helper) \
- asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t" \
- "jns 1f\n" \
- "call " helper "\n\t" \
- "1:\n" \
- ::"a" (rw) : "memory")
-
-#define __build_read_lock_const(rw, helper) \
- asm volatile(LOCK_PREFIX " subl $1,%0\n\t" \
- "jns 1f\n" \
- "pushl %%eax\n\t" \
- "leal %0,%%eax\n\t" \
- "call " helper "\n\t" \
- "popl %%eax\n\t" \
- "1:\n" \
- :"+m" (*(volatile int *)rw) : : "memory")
-
-#define __build_read_lock(rw, helper) do { \
- if (__builtin_constant_p(rw)) \
- __build_read_lock_const(rw, helper); \
- else \
- __build_read_lock_ptr(rw, helper); \
- } while (0)
-
-#define __build_write_lock_ptr(rw, helper) \
- asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
- "jz 1f\n" \
- "call " helper "\n\t" \
- "1:\n" \
- ::"a" (rw) : "memory")
-
-#define __build_write_lock_const(rw, helper) \
- asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
- "jz 1f\n" \
- "pushl %%eax\n\t" \
- "leal %0,%%eax\n\t" \
- "call " helper "\n\t" \
- "popl %%eax\n\t" \
- "1:\n" \
- :"+m" (*(volatile int *)rw) : : "memory")
-
-#define __build_write_lock(rw, helper) do { \
- if (__builtin_constant_p(rw)) \
- __build_write_lock_const(rw, helper); \
- else \
- __build_write_lock_ptr(rw, helper); \
- } while (0)
+/* Code is in asm-i386/spinlock.h */
#endif
diff --git a/include/asm-i386/rwsem.h b/include/asm-i386/rwsem.h
index 43113f5..bc598d6 100644
--- a/include/asm-i386/rwsem.h
+++ b/include/asm-i386/rwsem.h
@@ -99,17 +99,9 @@
__asm__ __volatile__(
"# beginning down_read\n\t"
LOCK_PREFIX " incl (%%eax)\n\t" /* adds 0x00000001, returns the old value */
- " js 2f\n\t" /* jump if we weren't granted the lock */
+ " jns 1f\n"
+ " call call_rwsem_down_read_failed\n"
"1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " pushl %%ecx\n\t"
- " pushl %%edx\n\t"
- " call rwsem_down_read_failed\n\t"
- " popl %%edx\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
"# ending down_read\n\t"
: "+m" (sem->count)
: "a" (sem)
@@ -151,15 +143,9 @@
"# beginning down_write\n\t"
LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns the old value */
" testl %%edx,%%edx\n\t" /* was the count 0 before? */
- " jnz 2f\n\t" /* jump if we weren't granted the lock */
- "1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " pushl %%ecx\n\t"
- " call rwsem_down_write_failed\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
+ " jz 1f\n"
+ " call call_rwsem_down_write_failed\n"
+ "1:\n"
"# ending down_write"
: "+m" (sem->count), "=d" (tmp)
: "a" (sem), "1" (tmp)
@@ -193,17 +179,9 @@
__asm__ __volatile__(
"# beginning __up_read\n\t"
LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old value */
- " js 2f\n\t" /* jump if the lock is being waited upon */
- "1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " decw %%dx\n\t" /* do nothing if still outstanding active readers */
- " jnz 1b\n\t"
- " pushl %%ecx\n\t"
- " call rwsem_wake\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
+ " jns 1f\n\t"
+ " call call_rwsem_wake\n"
+ "1:\n"
"# ending __up_read\n"
: "+m" (sem->count), "=d" (tmp)
: "a" (sem), "1" (tmp)
@@ -219,17 +197,9 @@
"# beginning __up_write\n\t"
" movl %2,%%edx\n\t"
LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t" /* tries to transition 0xffff0001 -> 0x00000000 */
- " jnz 2f\n\t" /* jump if the lock is being waited upon */
+ " jz 1f\n"
+ " call call_rwsem_wake\n"
"1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " decw %%dx\n\t" /* did the active count reduce to 0? */
- " jnz 1b\n\t" /* jump back if not */
- " pushl %%ecx\n\t"
- " call rwsem_wake\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
"# ending __up_write\n"
: "+m" (sem->count)
: "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
@@ -244,17 +214,9 @@
__asm__ __volatile__(
"# beginning __downgrade_write\n\t"
LOCK_PREFIX " addl %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
- " js 2f\n\t" /* jump if the lock is being waited upon */
+ " jns 1f\n\t"
+ " call call_rwsem_downgrade_wake\n"
"1:\n\t"
- LOCK_SECTION_START("")
- "2:\n\t"
- " pushl %%ecx\n\t"
- " pushl %%edx\n\t"
- " call rwsem_downgrade_wake\n\t"
- " popl %%edx\n\t"
- " popl %%ecx\n\t"
- " jmp 1b\n"
- LOCK_SECTION_END
"# ending __downgrade_write\n"
: "+m" (sem->count)
: "a" (sem), "i" (-RWSEM_WAITING_BIAS)
diff --git a/include/asm-i386/segment.h b/include/asm-i386/segment.h
index faf9953..b7ab596 100644
--- a/include/asm-i386/segment.h
+++ b/include/asm-i386/segment.h
@@ -83,6 +83,11 @@
#define GDT_SIZE (GDT_ENTRIES * 8)
+/* Matches __KERNEL_CS and __USER_CS (they must be 2 entries apart) */
+#define SEGMENT_IS_FLAT_CODE(x) (((x) & 0xec) == GDT_ENTRY_KERNEL_CS * 8)
+/* Matches PNP_CS32 and PNP_CS16 (they must be consecutive) */
+#define SEGMENT_IS_PNP_CODE(x) (((x) & 0xf4) == GDT_ENTRY_PNPBIOS_BASE * 8)
+
/* Simple and small GDT entries for booting only */
#define GDT_ENTRY_BOOT_CS 2
@@ -112,4 +117,16 @@
*/
#define IDT_ENTRIES 256
+/* Bottom two bits of selector give the ring privilege level */
+#define SEGMENT_RPL_MASK 0x3
+/* Bit 2 is table indicator (LDT/GDT) */
+#define SEGMENT_TI_MASK 0x4
+
+/* User mode is privilege level 3 */
+#define USER_RPL 0x3
+/* LDT segment has TI set, GDT has it cleared */
+#define SEGMENT_LDT 0x4
+#define SEGMENT_GDT 0x0
+
+#define get_kernel_rpl() 0
#endif
diff --git a/include/asm-i386/semaphore.h b/include/asm-i386/semaphore.h
index d51e800..4e34a46 100644
--- a/include/asm-i386/semaphore.h
+++ b/include/asm-i386/semaphore.h
@@ -100,13 +100,10 @@
__asm__ __volatile__(
"# atomic down operation\n\t"
LOCK_PREFIX "decl %0\n\t" /* --sem->count */
- "js 2f\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tlea %0,%%eax\n\t"
- "call __down_failed\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
+ "jns 2f\n"
+ "\tlea %0,%%eax\n\t"
+ "call __down_failed\n"
+ "2:"
:"+m" (sem->count)
:
:"memory","ax");
@@ -123,16 +120,13 @@
might_sleep();
__asm__ __volatile__(
"# atomic interruptible down operation\n\t"
+ "xorl %0,%0\n\t"
LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "js 2f\n\t"
- "xorl %0,%0\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tlea %1,%%eax\n\t"
- "call __down_failed_interruptible\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
- :"=a" (result), "+m" (sem->count)
+ "jns 2f\n\t"
+ "lea %1,%%eax\n\t"
+ "call __down_failed_interruptible\n"
+ "2:"
+ :"=&a" (result), "+m" (sem->count)
:
:"memory");
return result;
@@ -148,16 +142,13 @@
__asm__ __volatile__(
"# atomic interruptible down operation\n\t"
+ "xorl %0,%0\n\t"
LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "js 2f\n\t"
- "xorl %0,%0\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tlea %1,%%eax\n\t"
+ "jns 2f\n\t"
+ "lea %1,%%eax\n\t"
"call __down_failed_trylock\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
- :"=a" (result), "+m" (sem->count)
+ "2:\n"
+ :"=&a" (result), "+m" (sem->count)
:
:"memory");
return result;
@@ -166,22 +157,16 @@
/*
* Note! This is subtle. We jump to wake people up only if
* the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
*/
static inline void up(struct semaphore * sem)
{
__asm__ __volatile__(
"# atomic up operation\n\t"
LOCK_PREFIX "incl %0\n\t" /* ++sem->count */
- "jle 2f\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tlea %0,%%eax\n\t"
- "call __up_wakeup\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
- ".subsection 0\n"
+ "jg 1f\n\t"
+ "lea %0,%%eax\n\t"
+ "call __up_wakeup\n"
+ "1:"
:"+m" (sem->count)
:
:"memory","ax");
diff --git a/include/asm-i386/smp.h b/include/asm-i386/smp.h
index 142d10e..32ac8c9 100644
--- a/include/asm-i386/smp.h
+++ b/include/asm-i386/smp.h
@@ -80,17 +80,12 @@
return GET_APIC_ID(*(unsigned long *)(APIC_BASE+APIC_ID));
}
#endif
-
-static __inline int logical_smp_processor_id(void)
-{
- /* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR));
-}
-
#endif
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
+extern unsigned int num_processors;
+
#endif /* !__ASSEMBLY__ */
#else /* CONFIG_SMP */
@@ -100,4 +95,15 @@
#define NO_PROC_ID 0xFF /* No processor magic marker */
#endif
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_X86_LOCAL_APIC
+static __inline int logical_smp_processor_id(void)
+{
+ /* we don't want to mark this access volatile - bad code generation */
+ return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR));
+}
+#endif
+#endif
+
#endif
diff --git a/include/asm-i386/spinlock.h b/include/asm-i386/spinlock.h
index d102036..b0b3043 100644
--- a/include/asm-i386/spinlock.h
+++ b/include/asm-i386/spinlock.h
@@ -4,8 +4,12 @@
#include <asm/atomic.h>
#include <asm/rwlock.h>
#include <asm/page.h>
+#include <asm/processor.h>
#include <linux/compiler.h>
+#define CLI_STRING "cli"
+#define STI_STRING "sti"
+
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
*
@@ -17,67 +21,64 @@
* (the type definitions are in asm/spinlock_types.h)
*/
-#define __raw_spin_is_locked(x) \
- (*(volatile signed char *)(&(x)->slock) <= 0)
-
-#define __raw_spin_lock_string \
- "\n1:\t" \
- LOCK_PREFIX " ; decb %0\n\t" \
- "jns 3f\n" \
- "2:\t" \
- "rep;nop\n\t" \
- "cmpb $0,%0\n\t" \
- "jle 2b\n\t" \
- "jmp 1b\n" \
- "3:\n\t"
-
-/*
- * NOTE: there's an irqs-on section here, which normally would have to be
- * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use
- * __raw_spin_lock_string_flags().
- */
-#define __raw_spin_lock_string_flags \
- "\n1:\t" \
- LOCK_PREFIX " ; decb %0\n\t" \
- "jns 5f\n" \
- "2:\t" \
- "testl $0x200, %1\n\t" \
- "jz 4f\n\t" \
- "sti\n" \
- "3:\t" \
- "rep;nop\n\t" \
- "cmpb $0, %0\n\t" \
- "jle 3b\n\t" \
- "cli\n\t" \
- "jmp 1b\n" \
- "4:\t" \
- "rep;nop\n\t" \
- "cmpb $0, %0\n\t" \
- "jg 1b\n\t" \
- "jmp 4b\n" \
- "5:\n\t"
+static inline int __raw_spin_is_locked(raw_spinlock_t *x)
+{
+ return *(volatile signed char *)(&(x)->slock) <= 0;
+}
static inline void __raw_spin_lock(raw_spinlock_t *lock)
{
- asm(__raw_spin_lock_string : "+m" (lock->slock) : : "memory");
+ asm volatile("\n1:\t"
+ LOCK_PREFIX " ; decb %0\n\t"
+ "jns 3f\n"
+ "2:\t"
+ "rep;nop\n\t"
+ "cmpb $0,%0\n\t"
+ "jle 2b\n\t"
+ "jmp 1b\n"
+ "3:\n\t"
+ : "+m" (lock->slock) : : "memory");
}
/*
* It is easier for the lock validator if interrupts are not re-enabled
* in the middle of a lock-acquire. This is a performance feature anyway
* so we turn it off:
+ *
+ * NOTE: there's an irqs-on section here, which normally would have to be
+ * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use this variant.
*/
#ifndef CONFIG_PROVE_LOCKING
static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
{
- asm(__raw_spin_lock_string_flags : "+m" (lock->slock) : "r" (flags) : "memory");
+ asm volatile(
+ "\n1:\t"
+ LOCK_PREFIX " ; decb %0\n\t"
+ "jns 5f\n"
+ "2:\t"
+ "testl $0x200, %1\n\t"
+ "jz 4f\n\t"
+ STI_STRING "\n"
+ "3:\t"
+ "rep;nop\n\t"
+ "cmpb $0, %0\n\t"
+ "jle 3b\n\t"
+ CLI_STRING "\n\t"
+ "jmp 1b\n"
+ "4:\t"
+ "rep;nop\n\t"
+ "cmpb $0, %0\n\t"
+ "jg 1b\n\t"
+ "jmp 4b\n"
+ "5:\n\t"
+ : "+m" (lock->slock) : "r" (flags) : "memory");
}
#endif
static inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
char oldval;
- __asm__ __volatile__(
+ asm volatile(
"xchgb %b0,%1"
:"=q" (oldval), "+m" (lock->slock)
:"0" (0) : "memory");
@@ -93,38 +94,29 @@
#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
-#define __raw_spin_unlock_string \
- "movb $1,%0" \
- :"+m" (lock->slock) : : "memory"
-
-
static inline void __raw_spin_unlock(raw_spinlock_t *lock)
{
- __asm__ __volatile__(
- __raw_spin_unlock_string
- );
+ asm volatile("movb $1,%0" : "+m" (lock->slock) :: "memory");
}
#else
-#define __raw_spin_unlock_string \
- "xchgb %b0, %1" \
- :"=q" (oldval), "+m" (lock->slock) \
- :"0" (oldval) : "memory"
-
static inline void __raw_spin_unlock(raw_spinlock_t *lock)
{
char oldval = 1;
- __asm__ __volatile__(
- __raw_spin_unlock_string
- );
+ asm volatile("xchgb %b0, %1"
+ : "=q" (oldval), "+m" (lock->slock)
+ : "0" (oldval) : "memory");
}
#endif
-#define __raw_spin_unlock_wait(lock) \
- do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+ while (__raw_spin_is_locked(lock))
+ cpu_relax();
+}
/*
* Read-write spinlocks, allowing multiple readers
@@ -151,22 +143,36 @@
* read_can_lock - would read_trylock() succeed?
* @lock: the rwlock in question.
*/
-#define __raw_read_can_lock(x) ((int)(x)->lock > 0)
+static inline int __raw_read_can_lock(raw_rwlock_t *x)
+{
+ return (int)(x)->lock > 0;
+}
/**
* write_can_lock - would write_trylock() succeed?
* @lock: the rwlock in question.
*/
-#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+static inline int __raw_write_can_lock(raw_rwlock_t *x)
+{
+ return (x)->lock == RW_LOCK_BIAS;
+}
static inline void __raw_read_lock(raw_rwlock_t *rw)
{
- __build_read_lock(rw, "__read_lock_failed");
+ asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t"
+ "jns 1f\n"
+ "call __read_lock_failed\n\t"
+ "1:\n"
+ ::"a" (rw) : "memory");
}
static inline void __raw_write_lock(raw_rwlock_t *rw)
{
- __build_write_lock(rw, "__write_lock_failed");
+ asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",(%0)\n\t"
+ "jz 1f\n"
+ "call __write_lock_failed\n\t"
+ "1:\n"
+ ::"a" (rw) : "memory");
}
static inline int __raw_read_trylock(raw_rwlock_t *lock)
diff --git a/include/asm-i386/stacktrace.h b/include/asm-i386/stacktrace.h
new file mode 100644
index 0000000..7d1f6a5
--- /dev/null
+++ b/include/asm-i386/stacktrace.h
@@ -0,0 +1 @@
+#include <asm-x86_64/stacktrace.h>
diff --git a/include/asm-i386/therm_throt.h b/include/asm-i386/therm_throt.h
new file mode 100644
index 0000000..399bf60
--- /dev/null
+++ b/include/asm-i386/therm_throt.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_I386_THERM_THROT_H__
+#define __ASM_I386_THERM_THROT_H__ 1
+
+#include <asm/atomic.h>
+
+extern atomic_t therm_throt_en;
+int therm_throt_process(int curr);
+
+#endif /* __ASM_I386_THERM_THROT_H__ */
diff --git a/include/asm-i386/tlbflush.h b/include/asm-i386/tlbflush.h
index d57ca5c..360648b 100644
--- a/include/asm-i386/tlbflush.h
+++ b/include/asm-i386/tlbflush.h
@@ -36,8 +36,6 @@
: "memory"); \
} while (0)
-extern unsigned long pgkern_mask;
-
# define __flush_tlb_all() \
do { \
if (cpu_has_pge) \
@@ -49,7 +47,7 @@
#define cpu_has_invlpg (boot_cpu_data.x86 > 3)
#define __flush_tlb_single(addr) \
- __asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
+ __asm__ __volatile__("invlpg (%0)" ::"r" (addr) : "memory")
#ifdef CONFIG_X86_INVLPG
# define __flush_tlb_one(addr) __flush_tlb_single(addr)
diff --git a/include/asm-i386/tsc.h b/include/asm-i386/tsc.h
index 97b828c..c139331 100644
--- a/include/asm-i386/tsc.h
+++ b/include/asm-i386/tsc.h
@@ -6,7 +6,6 @@
#ifndef _ASM_i386_TSC_H
#define _ASM_i386_TSC_H
-#include <linux/config.h>
#include <asm/processor.h>
/*
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index fc1c8dd..bd99870 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -323,18 +323,20 @@
#define __NR_tee 315
#define __NR_vmsplice 316
#define __NR_move_pages 317
+#define __NR_getcpu 318
#ifdef __KERNEL__
-#define NR_syscalls 318
+#define NR_syscalls 319
+#include <linux/err.h>
/*
- * user-visible error numbers are in the range -1 - -128: see
+ * user-visible error numbers are in the range -1 - -MAX_ERRNO: see
* <asm-i386/errno.h>
*/
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-(128 + 1))) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
errno = -(res); \
res = -1; \
} \
diff --git a/include/asm-i386/unwind.h b/include/asm-i386/unwind.h
index 4c1a0b9..5031d69 100644
--- a/include/asm-i386/unwind.h
+++ b/include/asm-i386/unwind.h
@@ -18,6 +18,7 @@
{
struct pt_regs regs;
struct task_struct *task;
+ unsigned call_frame:1;
};
#define UNW_PC(frame) (frame)->regs.eip
@@ -28,6 +29,8 @@
#define FRAME_LINK_OFFSET 0
#define STACK_BOTTOM(tsk) STACK_LIMIT((tsk)->thread.esp0)
#define STACK_TOP(tsk) ((tsk)->thread.esp0)
+#else
+#define UNW_FP(frame) ((void)(frame), 0)
#endif
#define STACK_LIMIT(ptr) (((ptr) - 1) & ~(THREAD_SIZE - 1))
@@ -42,6 +45,10 @@
PTREGS_INFO(edi), \
PTREGS_INFO(eip)
+#define UNW_DEFAULT_RA(raItem, dataAlign) \
+ ((raItem).where == Memory && \
+ !((raItem).value * (dataAlign) + 4))
+
static inline void arch_unw_init_frame_info(struct unwind_frame_info *info,
/*const*/ struct pt_regs *regs)
{
@@ -88,6 +95,7 @@
#define UNW_PC(frame) ((void)(frame), 0)
#define UNW_SP(frame) ((void)(frame), 0)
+#define UNW_FP(frame) ((void)(frame), 0)
static inline int arch_unw_user_mode(const void *info)
{
diff --git a/include/asm-ia64/esi.h b/include/asm-ia64/esi.h
new file mode 100644
index 0000000..84aac0e
--- /dev/null
+++ b/include/asm-ia64/esi.h
@@ -0,0 +1,30 @@
+/*
+ * ESI service calls.
+ *
+ * Copyright (c) Copyright 2005-2006 Hewlett-Packard Development Company, L.P.
+ * Alex Williamson <alex.williamson@hp.com>
+ */
+#ifndef esi_h
+#define esi_h
+
+#include <linux/efi.h>
+
+#define ESI_QUERY 0x00000001
+#define ESI_OPEN_HANDLE 0x02000000
+#define ESI_CLOSE_HANDLE 0x02000001
+
+enum esi_proc_type {
+ ESI_PROC_SERIALIZED, /* calls need to be serialized */
+ ESI_PROC_MP_SAFE, /* MP-safe, but not reentrant */
+ ESI_PROC_REENTRANT /* MP-safe and reentrant */
+};
+
+extern int ia64_esi_init (void);
+extern struct ia64_sal_retval esi_call_phys (void *, u64 *);
+extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *,
+ enum esi_proc_type,
+ u64, u64, u64, u64, u64, u64, u64, u64);
+extern int ia64_esi_call_phys(efi_guid_t, struct ia64_sal_retval *, u64, u64,
+ u64, u64, u64, u64, u64, u64);
+
+#endif /* esi_h */
diff --git a/include/asm-ia64/futex.h b/include/asm-ia64/futex.h
index 6a332a9..07d77f3 100644
--- a/include/asm-ia64/futex.h
+++ b/include/asm-ia64/futex.h
@@ -1,6 +1,124 @@
#ifndef _ASM_FUTEX_H
#define _ASM_FUTEX_H
-#include <asm-generic/futex.h>
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
-#endif
+#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
+do { \
+ register unsigned long r8 __asm ("r8") = 0; \
+ __asm__ __volatile__( \
+ " mf;; \n" \
+ "[1:] " insn ";; \n" \
+ " .xdata4 \"__ex_table\", 1b-., 2f-. \n" \
+ "[2:]" \
+ : "+r" (r8), "=r" (oldval) \
+ : "r" (uaddr), "r" (oparg) \
+ : "memory"); \
+ ret = r8; \
+} while (0)
+
+#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \
+do { \
+ register unsigned long r8 __asm ("r8") = 0; \
+ int val, newval; \
+ do { \
+ __asm__ __volatile__( \
+ " mf;; \n" \
+ "[1:] ld4 %3=[%4];; \n" \
+ " mov %2=%3 \n" \
+ insn ";; \n" \
+ " mov ar.ccv=%2;; \n" \
+ "[2:] cmpxchg4.acq %1=[%4],%3,ar.ccv;; \n" \
+ " .xdata4 \"__ex_table\", 1b-., 3f-.\n" \
+ " .xdata4 \"__ex_table\", 2b-., 3f-.\n" \
+ "[3:]" \
+ : "+r" (r8), "=r" (val), "=&r" (oldval), \
+ "=&r" (newval) \
+ : "r" (uaddr), "r" (oparg) \
+ : "memory"); \
+ if (unlikely (r8)) \
+ break; \
+ } while (unlikely (val != oldval)); \
+ ret = r8; \
+} while (0)
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ inc_preempt_count();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op1("xchg4 %1=[%2],%3", ret, oldval, uaddr,
+ oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op2("add %3=%3,%5", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op2("or %3=%3,%5", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op2("and %3=%3,%5", ret, oldval, uaddr,
+ ~oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op2("xor %3=%3,%5", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ dec_preempt_count();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ {
+ register unsigned long r8 __asm ("r8");
+ __asm__ __volatile__(
+ " mf;; \n"
+ " mov ar.ccv=%3;; \n"
+ "[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n"
+ " .xdata4 \"__ex_table\", 1b-., 2f-. \n"
+ "[2:]"
+ : "=r" (r8)
+ : "r" (uaddr), "r" (newval),
+ "rO" ((long) (unsigned) oldval)
+ : "memory");
+ return r8;
+ }
+}
+
+#endif /* _ASM_FUTEX_H */
diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h
index 9389049..1b45b71 100644
--- a/include/asm-ia64/kprobes.h
+++ b/include/asm-ia64/kprobes.h
@@ -29,7 +29,8 @@
#include <linux/percpu.h>
#include <asm/break.h>
-#define MAX_INSN_SIZE 16
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE 1
#define BREAK_INST (long)(__IA64_BREAK_KPROBE << 6)
typedef union cmp_inst {
@@ -94,7 +95,7 @@
#define IP_RELATIVE_PREDICT_OPCODE (7)
#define LONG_BRANCH_OPCODE (0xC)
#define LONG_CALL_OPCODE (0xD)
-#define arch_remove_kprobe(p) do {} while (0)
+#define flush_insn_slot(p) do { } while (0)
typedef struct kprobe_opcode {
bundle_t bundle;
@@ -108,7 +109,7 @@
/* Architecture specific copy of original instruction*/
struct arch_specific_insn {
/* copy of the instruction to be emulated */
- kprobe_opcode_t insn;
+ kprobe_opcode_t *insn;
#define INST_FLAG_FIX_RELATIVE_IP_ADDR 1
#define INST_FLAG_FIX_BRANCH_REG 2
#define INST_FLAG_BREAK_INST 4
@@ -125,6 +126,6 @@
}
extern void invalidate_stacked_regs(void);
extern void flush_register_stack(void);
-extern void flush_insn_slot(struct kprobe *p);
+extern void arch_remove_kprobe(struct kprobe *p);
#endif /* _ASM_KPROBES_H */
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h
index 27c9203..76203f9 100644
--- a/include/asm-ia64/mca_asm.h
+++ b/include/asm-ia64/mca_asm.h
@@ -197,9 +197,9 @@
movl temp2 = start_addr; \
;; \
mov cr.iip = temp2; \
+ movl gp = __gp \
;; \
DATA_PA_TO_VA(sp, temp1); \
- DATA_PA_TO_VA(gp, temp2); \
srlz.i; \
;; \
nop 1; \
diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h
index 6a33a07..c3b1f86 100644
--- a/include/asm-ia64/meminit.h
+++ b/include/asm-ia64/meminit.h
@@ -55,6 +55,7 @@
extern unsigned long vmalloc_end;
extern struct page *vmem_map;
extern int find_largest_hole (u64 start, u64 end, void *arg);
+ extern int register_active_ranges (u64 start, u64 end, void *arg);
extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
extern int vmemmap_find_next_valid_pfn(int, int);
#else
diff --git a/include/asm-ia64/module.h b/include/asm-ia64/module.h
index 85c82bd..d2da61e 100644
--- a/include/asm-ia64/module.h
+++ b/include/asm-ia64/module.h
@@ -28,7 +28,8 @@
#define Elf_Ehdr Elf64_Ehdr
#define MODULE_PROC_FAMILY "ia64"
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY \
+ "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
#define ARCH_SHF_SMALL SHF_IA_64_SHORT
diff --git a/include/asm-ia64/numa.h b/include/asm-ia64/numa.h
index e0a1d17..7d5e2cc 100644
--- a/include/asm-ia64/numa.h
+++ b/include/asm-ia64/numa.h
@@ -69,6 +69,8 @@
#else /* !CONFIG_NUMA */
+#define map_cpu_to_node(cpu, nid) do{}while(0)
+#define unmap_cpu_from_node(cpu, nid) do{}while(0)
#define paddr_to_nid(addr) 0
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
index 20a8d61..2c8fd92 100644
--- a/include/asm-ia64/pal.h
+++ b/include/asm-ia64/pal.h
@@ -78,6 +78,7 @@
#define PAL_VM_TR_READ 261 /* read contents of translation register */
#define PAL_GET_PSTATE 262 /* get the current P-state */
#define PAL_SET_PSTATE 263 /* set the P-state */
+#define PAL_BRAND_INFO 274 /* Processor branding information */
#ifndef __ASSEMBLY__
@@ -963,7 +964,8 @@
ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
{
struct ia64_pal_retval iprv;
- PAL_CALL(iprv, PAL_CACHE_READ, line_id.pclid_data, physical_addr, 0);
+ PAL_CALL_PHYS_STK(iprv, PAL_CACHE_READ, line_id.pclid_data,
+ physical_addr, 0);
return iprv.status;
}
@@ -985,7 +987,8 @@
ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data)
{
struct ia64_pal_retval iprv;
- PAL_CALL(iprv, PAL_CACHE_WRITE, line_id.pclid_data, physical_addr, data);
+ PAL_CALL_PHYS_STK(iprv, PAL_CACHE_WRITE, line_id.pclid_data,
+ physical_addr, data);
return iprv.status;
}
@@ -1133,6 +1136,15 @@
return iprv.status;
}
+/* Processor branding information*/
+static inline s64
+ia64_pal_get_brand_info (char *brand_info)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL_STK(iprv, PAL_BRAND_INFO, 0, (u64)brand_info, 0);
+ return iprv.status;
+}
+
/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are
* suspended, but cache and TLB coherency is maintained.
*/
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
index 265f482..5830d36 100644
--- a/include/asm-ia64/processor.h
+++ b/include/asm-ia64/processor.h
@@ -20,12 +20,6 @@
#include <asm/ustack.h>
#define IA64_NUM_DBG_REGS 8
-/*
- * Limits for PMC and PMD are set to less than maximum architected values
- * but should be sufficient for a while
- */
-#define IA64_NUM_PMC_REGS 64
-#define IA64_NUM_PMD_REGS 64
#define DEFAULT_MAP_BASE __IA64_UL_CONST(0x2000000000000000)
#define DEFAULT_TASK_SIZE __IA64_UL_CONST(0xa000000000000000)
@@ -163,6 +157,7 @@
__u8 family;
__u8 archrev;
char vendor[16];
+ char *model_name;
#ifdef CONFIG_NUMA
struct ia64_node_data *node_data;
@@ -262,13 +257,9 @@
# define INIT_THREAD_IA32
#endif /* CONFIG_IA32_SUPPORT */
#ifdef CONFIG_PERFMON
- __u64 pmcs[IA64_NUM_PMC_REGS];
- __u64 pmds[IA64_NUM_PMD_REGS];
void *pfm_context; /* pointer to detailed PMU context */
unsigned long pfm_needs_checking; /* when >0, pending perfmon work on kernel exit */
-# define INIT_THREAD_PM .pmcs = {0UL, }, \
- .pmds = {0UL, }, \
- .pfm_context = NULL, \
+# define INIT_THREAD_PM .pfm_context = NULL, \
.pfm_needs_checking = 0UL,
#else
# define INIT_THREAD_PM
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
index 74bde1c..60fd4ae 100644
--- a/include/asm-ia64/smp.h
+++ b/include/asm-ia64/smp.h
@@ -126,6 +126,7 @@
extern void lock_ipi_calllock(void);
extern void unlock_ipi_calllock(void);
extern void identify_siblings (struct cpuinfo_ia64 *);
+extern int is_multithreading_enabled(void);
#else
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index f581662..bb0eb72 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -286,7 +286,8 @@
/* 1294, 1295 reserved for pselect/ppoll */
#define __NR_unshare 1296
#define __NR_splice 1297
-/* 1298, 1299 reserved for set_robust_list/get_robust_list */
+#define __NR_set_robust_list 1298
+#define __NR_get_robust_list 1299
#define __NR_sync_file_range 1300
#define __NR_tee 1301
#define __NR_vmsplice 1302
diff --git a/include/asm-m32r/spinlock.h b/include/asm-m32r/spinlock.h
index f94c1a6..f9f9072 100644
--- a/include/asm-m32r/spinlock.h
+++ b/include/asm-m32r/spinlock.h
@@ -298,7 +298,14 @@
);
}
-#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
+static inline int __raw_read_trylock(raw_rwlock_t *lock)
+{
+ atomic_t *count = (atomic_t*)lock;
+ if (atomic_dec_return(count) >= 0)
+ return 1;
+ atomic_inc(count);
+ return 0;
+}
static inline int __raw_write_trylock(raw_rwlock_t *lock)
{
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
index 9e618af..4ce0619 100644
--- a/include/asm-m32r/system.h
+++ b/include/asm-m32r/system.h
@@ -328,15 +328,15 @@
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#define smp_read_barrier_depends() do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
#endif
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
-
#define arch_align_stack(x) (x)
#endif /* _ASM_M32R_SYSTEM_H */
diff --git a/include/asm-m32r/unistd.h b/include/asm-m32r/unistd.h
index 89f376e..5c6a9ac 100644
--- a/include/asm-m32r/unistd.h
+++ b/include/asm-m32r/unistd.h
@@ -296,8 +296,9 @@
#ifdef __KERNEL__
#define NR_syscalls 285
+#include <linux/err.h>
-/* user-visible error numbers are in the range -1 - -124: see
+/* user-visible error numbers are in the range -1 - -MAX_ERRNO: see
* <asm-m32r/errno.h>
*/
@@ -305,7 +306,7 @@
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-(124 + 1))) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
/* Avoid using "res" which is declared to be in register r0; \
errno might expand to a function call and clobber it. */ \
int __err = -(res); \
diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h
index 7c0b629..751632b 100644
--- a/include/asm-m68k/unistd.h
+++ b/include/asm-m68k/unistd.h
@@ -288,13 +288,14 @@
#ifdef __KERNEL__
#define NR_syscalls 282
+#include <linux/err.h>
-/* user-visible error numbers are in the range -1 - -124: see
+/* user-visible error numbers are in the range -1 - -MAX_ERRNO: see
<asm-m68k/errno.h> */
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
/* avoid using res which is declared to be in register d0; \
errno might expand to a function call and clobber it. */ \
int __err = -(res); \
diff --git a/include/asm-m68knommu/unistd.h b/include/asm-m68knommu/unistd.h
index 1b2abdf..21fdc37 100644
--- a/include/asm-m68knommu/unistd.h
+++ b/include/asm-m68knommu/unistd.h
@@ -289,13 +289,14 @@
#ifdef __KERNEL__
#define NR_syscalls 282
+#include <linux/err.h>
-/* user-visible error numbers are in the range -1 - -122: see
+/* user-visible error numbers are in the range -1 - -MAX_ERRNO: see
<asm-m68k/errno.h> */
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
/* avoid using res which is declared to be in register d0; \
errno might expand to a function call and clobber it. */ \
int __err = -(res); \
diff --git a/include/asm-mips/Kbuild b/include/asm-mips/Kbuild
index c68e168..7897f05 100644
--- a/include/asm-mips/Kbuild
+++ b/include/asm-mips/Kbuild
@@ -1 +1,3 @@
include include/asm-generic/Kbuild.asm
+
+header-y += cachectl.h sgidefs.h sysmips.h
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index 3b745e7..78c35ec 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -112,8 +112,7 @@
* Valid machtype for group GALILEO
*/
#define MACH_GROUP_GALILEO 11 /* Galileo Eval Boards */
-#define MACH_EV96100 0 /* EV96100 */
-#define MACH_EV64120A 1 /* EV64120A */
+#define MACH_EV64120A 0 /* EV64120A */
/*
* Valid machtype for group MOMENCO
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index 47bc8f6..36416fd 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -21,7 +21,6 @@
* - flush_cache_range(vma, start, end) flushes a range of pages
* - flush_icache_range(start, end) flush a range of instructions
* - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
*
* MIPS specific flush operations:
*
@@ -39,7 +38,7 @@
static inline void flush_dcache_page(struct page *page)
{
- if (cpu_has_dc_aliases)
+ if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
__flush_dcache_page(page);
}
@@ -47,8 +46,13 @@
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-extern void (*flush_icache_page)(struct vm_area_struct *vma,
+extern void (*__flush_icache_page)(struct vm_area_struct *vma,
struct page *page);
+static inline void flush_icache_page(struct vm_area_struct *vma,
+ struct page *page)
+{
+}
+
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
@@ -60,7 +64,7 @@
if (cpu_has_dc_aliases)
flush_cache_page(vma, vaddr, page_to_pfn(page));
memcpy(dst, src, len);
- flush_icache_page(vma, page);
+ __flush_icache_page(vma, page);
}
static inline void copy_from_user_page(struct vm_area_struct *vma,
diff --git a/include/asm-mips/fcntl.h b/include/asm-mips/fcntl.h
index 787220e..00a50ec 100644
--- a/include/asm-mips/fcntl.h
+++ b/include/asm-mips/fcntl.h
@@ -25,8 +25,6 @@
#define F_SETOWN 24 /* for sockets. */
#define F_GETOWN 23 /* for sockets. */
-#define F_SETSIG 10 /* for sockets. */
-#define F_GETSIG 11 /* for sockets. */
#ifndef __mips64
#define F_GETLK64 33 /* using 'struct flock64' */
diff --git a/include/asm-mips/galileo-boards/gt96100.h b/include/asm-mips/galileo-boards/gt96100.h
deleted file mode 100644
index aabd1b6..0000000
--- a/include/asm-mips/galileo-boards/gt96100.h
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Register offsets of the MIPS GT96100 Advanced Communication Controller.
- */
-#ifndef _GT96100_H
-#define _GT96100_H
-
-/*
- * Galileo GT96100 internal register base.
- */
-#define MIPS_GT96100_BASE (KSEG1ADDR(0x14000000))
-
-#define GT96100_WRITE(ofs, data) \
- *(volatile u32 *)(MIPS_GT96100_BASE+ofs) = cpu_to_le32(data)
-#define GT96100_READ(ofs) \
- le32_to_cpu(*(volatile u32 *)(MIPS_GT96100_BASE+ofs))
-
-#define GT96100_ETH_IO_SIZE 0x4000
-
-/************************************************************************
- * Register offset addresses follow
- ************************************************************************/
-
-/* CPU Interface Control Registers */
-#define GT96100_CPU_INTERF_CONFIG 0x000000
-
-/* Ethernet Ports */
-#define GT96100_ETH_PHY_ADDR_REG 0x080800
-#define GT96100_ETH_SMI_REG 0x080810
-/*
- These are offsets to port 0 registers. Add GT96100_ETH_IO_SIZE to
- get offsets to port 1 registers.
-*/
-#define GT96100_ETH_PORT_CONFIG 0x084800
-#define GT96100_ETH_PORT_CONFIG_EXT 0x084808
-#define GT96100_ETH_PORT_COMM 0x084810
-#define GT96100_ETH_PORT_STATUS 0x084818
-#define GT96100_ETH_SER_PARAM 0x084820
-#define GT96100_ETH_HASH_TBL_PTR 0x084828
-#define GT96100_ETH_FLOW_CNTRL_SRC_ADDR_L 0x084830
-#define GT96100_ETH_FLOW_CNTRL_SRC_ADDR_H 0x084838
-#define GT96100_ETH_SDMA_CONFIG 0x084840
-#define GT96100_ETH_SDMA_COMM 0x084848
-#define GT96100_ETH_INT_CAUSE 0x084850
-#define GT96100_ETH_INT_MASK 0x084858
-#define GT96100_ETH_1ST_RX_DESC_PTR0 0x084880
-#define GT96100_ETH_1ST_RX_DESC_PTR1 0x084884
-#define GT96100_ETH_1ST_RX_DESC_PTR2 0x084888
-#define GT96100_ETH_1ST_RX_DESC_PTR3 0x08488C
-#define GT96100_ETH_CURR_RX_DESC_PTR0 0x0848A0
-#define GT96100_ETH_CURR_RX_DESC_PTR1 0x0848A4
-#define GT96100_ETH_CURR_RX_DESC_PTR2 0x0848A8
-#define GT96100_ETH_CURR_RX_DESC_PTR3 0x0848AC
-#define GT96100_ETH_CURR_TX_DESC_PTR0 0x0848E0
-#define GT96100_ETH_CURR_TX_DESC_PTR1 0x0848E4
-#define GT96100_ETH_MIB_COUNT_BASE 0x085800
-
-/* SDMAs */
-#define GT96100_SDMA_GROUP_CONFIG 0x101AF0
-/* SDMA Group 0 */
-#define GT96100_SDMA_G0_CHAN0_CONFIG 0x000900
-#define GT96100_SDMA_G0_CHAN0_COMM 0x000908
-#define GT96100_SDMA_G0_CHAN0_RX_DESC_BASE 0x008900
-#define GT96100_SDMA_G0_CHAN0_CURR_RX_DESC_PTR 0x008910
-#define GT96100_SDMA_G0_CHAN0_TX_DESC_BASE 0x00C900
-#define GT96100_SDMA_G0_CHAN0_CURR_TX_DESC_PTR 0x00C910
-#define GT96100_SDMA_G0_CHAN0_1ST_TX_DESC_PTR 0x00C914
-#define GT96100_SDMA_G0_CHAN1_CONFIG 0x010900
-#define GT96100_SDMA_G0_CHAN1_COMM 0x010908
-#define GT96100_SDMA_G0_CHAN1_RX_DESC_BASE 0x018900
-#define GT96100_SDMA_G0_CHAN1_CURR_RX_DESC_PTR 0x018910
-#define GT96100_SDMA_G0_CHAN1_TX_DESC_BASE 0x01C900
-#define GT96100_SDMA_G0_CHAN1_CURR_TX_DESC_PTR 0x01C910
-#define GT96100_SDMA_G0_CHAN1_1ST_TX_DESC_PTR 0x01C914
-#define GT96100_SDMA_G0_CHAN2_CONFIG 0x020900
-#define GT96100_SDMA_G0_CHAN2_COMM 0x020908
-#define GT96100_SDMA_G0_CHAN2_RX_DESC_BASE 0x028900
-#define GT96100_SDMA_G0_CHAN2_CURR_RX_DESC_PTR 0x028910
-#define GT96100_SDMA_G0_CHAN2_TX_DESC_BASE 0x02C900
-#define GT96100_SDMA_G0_CHAN2_CURR_TX_DESC_PTR 0x02C910
-#define GT96100_SDMA_G0_CHAN2_1ST_TX_DESC_PTR 0x02C914
-#define GT96100_SDMA_G0_CHAN3_CONFIG 0x030900
-#define GT96100_SDMA_G0_CHAN3_COMM 0x030908
-#define GT96100_SDMA_G0_CHAN3_RX_DESC_BASE 0x038900
-#define GT96100_SDMA_G0_CHAN3_CURR_RX_DESC_PTR 0x038910
-#define GT96100_SDMA_G0_CHAN3_TX_DESC_BASE 0x03C900
-#define GT96100_SDMA_G0_CHAN3_CURR_TX_DESC_PTR 0x03C910
-#define GT96100_SDMA_G0_CHAN3_1ST_TX_DESC_PTR 0x03C914
-#define GT96100_SDMA_G0_CHAN4_CONFIG 0x040900
-#define GT96100_SDMA_G0_CHAN4_COMM 0x040908
-#define GT96100_SDMA_G0_CHAN4_RX_DESC_BASE 0x048900
-#define GT96100_SDMA_G0_CHAN4_CURR_RX_DESC_PTR 0x048910
-#define GT96100_SDMA_G0_CHAN4_TX_DESC_BASE 0x04C900
-#define GT96100_SDMA_G0_CHAN4_CURR_TX_DESC_PTR 0x04C910
-#define GT96100_SDMA_G0_CHAN4_1ST_TX_DESC_PTR 0x04C914
-#define GT96100_SDMA_G0_CHAN5_CONFIG 0x050900
-#define GT96100_SDMA_G0_CHAN5_COMM 0x050908
-#define GT96100_SDMA_G0_CHAN5_RX_DESC_BASE 0x058900
-#define GT96100_SDMA_G0_CHAN5_CURR_RX_DESC_PTR 0x058910
-#define GT96100_SDMA_G0_CHAN5_TX_DESC_BASE 0x05C900
-#define GT96100_SDMA_G0_CHAN5_CURR_TX_DESC_PTR 0x05C910
-#define GT96100_SDMA_G0_CHAN5_1ST_TX_DESC_PTR 0x05C914
-#define GT96100_SDMA_G0_CHAN6_CONFIG 0x060900
-#define GT96100_SDMA_G0_CHAN6_COMM 0x060908
-#define GT96100_SDMA_G0_CHAN6_RX_DESC_BASE 0x068900
-#define GT96100_SDMA_G0_CHAN6_CURR_RX_DESC_PTR 0x068910
-#define GT96100_SDMA_G0_CHAN6_TX_DESC_BASE 0x06C900
-#define GT96100_SDMA_G0_CHAN6_CURR_TX_DESC_PTR 0x06C910
-#define GT96100_SDMA_G0_CHAN6_1ST_TX_DESC_PTR 0x06C914
-#define GT96100_SDMA_G0_CHAN7_CONFIG 0x070900
-#define GT96100_SDMA_G0_CHAN7_COMM 0x070908
-#define GT96100_SDMA_G0_CHAN7_RX_DESC_BASE 0x078900
-#define GT96100_SDMA_G0_CHAN7_CURR_RX_DESC_PTR 0x078910
-#define GT96100_SDMA_G0_CHAN7_TX_DESC_BASE 0x07C900
-#define GT96100_SDMA_G0_CHAN7_CURR_TX_DESC_PTR 0x07C910
-#define GT96100_SDMA_G0_CHAN7_1ST_TX_DESC_PTR 0x07C914
-/* SDMA Group 1 */
-#define GT96100_SDMA_G1_CHAN0_CONFIG 0x100900
-#define GT96100_SDMA_G1_CHAN0_COMM 0x100908
-#define GT96100_SDMA_G1_CHAN0_RX_DESC_BASE 0x108900
-#define GT96100_SDMA_G1_CHAN0_CURR_RX_DESC_PTR 0x108910
-#define GT96100_SDMA_G1_CHAN0_TX_DESC_BASE 0x10C900
-#define GT96100_SDMA_G1_CHAN0_CURR_TX_DESC_PTR 0x10C910
-#define GT96100_SDMA_G1_CHAN0_1ST_TX_DESC_PTR 0x10C914
-#define GT96100_SDMA_G1_CHAN1_CONFIG 0x110900
-#define GT96100_SDMA_G1_CHAN1_COMM 0x110908
-#define GT96100_SDMA_G1_CHAN1_RX_DESC_BASE 0x118900
-#define GT96100_SDMA_G1_CHAN1_CURR_RX_DESC_PTR 0x118910
-#define GT96100_SDMA_G1_CHAN1_TX_DESC_BASE 0x11C900
-#define GT96100_SDMA_G1_CHAN1_CURR_TX_DESC_PTR 0x11C910
-#define GT96100_SDMA_G1_CHAN1_1ST_TX_DESC_PTR 0x11C914
-#define GT96100_SDMA_G1_CHAN2_CONFIG 0x120900
-#define GT96100_SDMA_G1_CHAN2_COMM 0x120908
-#define GT96100_SDMA_G1_CHAN2_RX_DESC_BASE 0x128900
-#define GT96100_SDMA_G1_CHAN2_CURR_RX_DESC_PTR 0x128910
-#define GT96100_SDMA_G1_CHAN2_TX_DESC_BASE 0x12C900
-#define GT96100_SDMA_G1_CHAN2_CURR_TX_DESC_PTR 0x12C910
-#define GT96100_SDMA_G1_CHAN2_1ST_TX_DESC_PTR 0x12C914
-#define GT96100_SDMA_G1_CHAN3_CONFIG 0x130900
-#define GT96100_SDMA_G1_CHAN3_COMM 0x130908
-#define GT96100_SDMA_G1_CHAN3_RX_DESC_BASE 0x138900
-#define GT96100_SDMA_G1_CHAN3_CURR_RX_DESC_PTR 0x138910
-#define GT96100_SDMA_G1_CHAN3_TX_DESC_BASE 0x13C900
-#define GT96100_SDMA_G1_CHAN3_CURR_TX_DESC_PTR 0x13C910
-#define GT96100_SDMA_G1_CHAN3_1ST_TX_DESC_PTR 0x13C914
-#define GT96100_SDMA_G1_CHAN4_CONFIG 0x140900
-#define GT96100_SDMA_G1_CHAN4_COMM 0x140908
-#define GT96100_SDMA_G1_CHAN4_RX_DESC_BASE 0x148900
-#define GT96100_SDMA_G1_CHAN4_CURR_RX_DESC_PTR 0x148910
-#define GT96100_SDMA_G1_CHAN4_TX_DESC_BASE 0x14C900
-#define GT96100_SDMA_G1_CHAN4_CURR_TX_DESC_PTR 0x14C910
-#define GT96100_SDMA_G1_CHAN4_1ST_TX_DESC_PTR 0x14C914
-#define GT96100_SDMA_G1_CHAN5_CONFIG 0x150900
-#define GT96100_SDMA_G1_CHAN5_COMM 0x150908
-#define GT96100_SDMA_G1_CHAN5_RX_DESC_BASE 0x158900
-#define GT96100_SDMA_G1_CHAN5_CURR_RX_DESC_PTR 0x158910
-#define GT96100_SDMA_G1_CHAN5_TX_DESC_BASE 0x15C900
-#define GT96100_SDMA_G1_CHAN5_CURR_TX_DESC_PTR 0x15C910
-#define GT96100_SDMA_G1_CHAN5_1ST_TX_DESC_PTR 0x15C914
-#define GT96100_SDMA_G1_CHAN6_CONFIG 0x160900
-#define GT96100_SDMA_G1_CHAN6_COMM 0x160908
-#define GT96100_SDMA_G1_CHAN6_RX_DESC_BASE 0x168900
-#define GT96100_SDMA_G1_CHAN6_CURR_RX_DESC_PTR 0x168910
-#define GT96100_SDMA_G1_CHAN6_TX_DESC_BASE 0x16C900
-#define GT96100_SDMA_G1_CHAN6_CURR_TX_DESC_PTR 0x16C910
-#define GT96100_SDMA_G1_CHAN6_1ST_TX_DESC_PTR 0x16C914
-#define GT96100_SDMA_G1_CHAN7_CONFIG 0x170900
-#define GT96100_SDMA_G1_CHAN7_COMM 0x170908
-#define GT96100_SDMA_G1_CHAN7_RX_DESC_BASE 0x178900
-#define GT96100_SDMA_G1_CHAN7_CURR_RX_DESC_PTR 0x178910
-#define GT96100_SDMA_G1_CHAN7_TX_DESC_BASE 0x17C900
-#define GT96100_SDMA_G1_CHAN7_CURR_TX_DESC_PTR 0x17C910
-#define GT96100_SDMA_G1_CHAN7_1ST_TX_DESC_PTR 0x17C914
-/* MPSCs */
-#define GT96100_MPSC0_MAIN_CONFIG_LOW 0x000A00
-#define GT96100_MPSC0_MAIN_CONFIG_HIGH 0x000A04
-#define GT96100_MPSC0_PROTOCOL_CONFIG 0x000A08
-#define GT96100_MPSC_CHAN0_REG1 0x000A0C
-#define GT96100_MPSC_CHAN0_REG2 0x000A10
-#define GT96100_MPSC_CHAN0_REG3 0x000A14
-#define GT96100_MPSC_CHAN0_REG4 0x000A18
-#define GT96100_MPSC_CHAN0_REG5 0x000A1C
-#define GT96100_MPSC_CHAN0_REG6 0x000A20
-#define GT96100_MPSC_CHAN0_REG7 0x000A24
-#define GT96100_MPSC_CHAN0_REG8 0x000A28
-#define GT96100_MPSC_CHAN0_REG9 0x000A2C
-#define GT96100_MPSC_CHAN0_REG10 0x000A30
-#define GT96100_MPSC_CHAN0_REG11 0x000A34
-#define GT96100_MPSC1_MAIN_CONFIG_LOW 0x008A00
-#define GT96100_MPSC1_MAIN_CONFIG_HIGH 0x008A04
-#define GT96100_MPSC1_PROTOCOL_CONFIG 0x008A08
-#define GT96100_MPSC_CHAN1_REG1 0x008A0C
-#define GT96100_MPSC_CHAN1_REG2 0x008A10
-#define GT96100_MPSC_CHAN1_REG3 0x008A14
-#define GT96100_MPSC_CHAN1_REG4 0x008A18
-#define GT96100_MPSC_CHAN1_REG5 0x008A1C
-#define GT96100_MPSC_CHAN1_REG6 0x008A20
-#define GT96100_MPSC_CHAN1_REG7 0x008A24
-#define GT96100_MPSC_CHAN1_REG8 0x008A28
-#define GT96100_MPSC_CHAN1_REG9 0x008A2C
-#define GT96100_MPSC_CHAN1_REG10 0x008A30
-#define GT96100_MPSC_CHAN1_REG11 0x008A34
-#define GT96100_MPSC2_MAIN_CONFIG_LOW 0x010A00
-#define GT96100_MPSC2_MAIN_CONFIG_HIGH 0x010A04
-#define GT96100_MPSC2_PROTOCOL_CONFIG 0x010A08
-#define GT96100_MPSC_CHAN2_REG1 0x010A0C
-#define GT96100_MPSC_CHAN2_REG2 0x010A10
-#define GT96100_MPSC_CHAN2_REG3 0x010A14
-#define GT96100_MPSC_CHAN2_REG4 0x010A18
-#define GT96100_MPSC_CHAN2_REG5 0x010A1C
-#define GT96100_MPSC_CHAN2_REG6 0x010A20
-#define GT96100_MPSC_CHAN2_REG7 0x010A24
-#define GT96100_MPSC_CHAN2_REG8 0x010A28
-#define GT96100_MPSC_CHAN2_REG9 0x010A2C
-#define GT96100_MPSC_CHAN2_REG10 0x010A30
-#define GT96100_MPSC_CHAN2_REG11 0x010A34
-#define GT96100_MPSC3_MAIN_CONFIG_LOW 0x018A00
-#define GT96100_MPSC3_MAIN_CONFIG_HIGH 0x018A04
-#define GT96100_MPSC3_PROTOCOL_CONFIG 0x018A08
-#define GT96100_MPSC_CHAN3_REG1 0x018A0C
-#define GT96100_MPSC_CHAN3_REG2 0x018A10
-#define GT96100_MPSC_CHAN3_REG3 0x018A14
-#define GT96100_MPSC_CHAN3_REG4 0x018A18
-#define GT96100_MPSC_CHAN3_REG5 0x018A1C
-#define GT96100_MPSC_CHAN3_REG6 0x018A20
-#define GT96100_MPSC_CHAN3_REG7 0x018A24
-#define GT96100_MPSC_CHAN3_REG8 0x018A28
-#define GT96100_MPSC_CHAN3_REG9 0x018A2C
-#define GT96100_MPSC_CHAN3_REG10 0x018A30
-#define GT96100_MPSC_CHAN3_REG11 0x018A34
-#define GT96100_MPSC4_MAIN_CONFIG_LOW 0x020A00
-#define GT96100_MPSC4_MAIN_CONFIG_HIGH 0x020A04
-#define GT96100_MPSC4_PROTOCOL_CONFIG 0x020A08
-#define GT96100_MPSC_CHAN4_REG1 0x020A0C
-#define GT96100_MPSC_CHAN4_REG2 0x020A10
-#define GT96100_MPSC_CHAN4_REG3 0x020A14
-#define GT96100_MPSC_CHAN4_REG4 0x020A18
-#define GT96100_MPSC_CHAN4_REG5 0x020A1C
-#define GT96100_MPSC_CHAN4_REG6 0x020A20
-#define GT96100_MPSC_CHAN4_REG7 0x020A24
-#define GT96100_MPSC_CHAN4_REG8 0x020A28
-#define GT96100_MPSC_CHAN4_REG9 0x020A2C
-#define GT96100_MPSC_CHAN4_REG10 0x020A30
-#define GT96100_MPSC_CHAN4_REG11 0x020A34
-#define GT96100_MPSC5_MAIN_CONFIG_LOW 0x028A00
-#define GT96100_MPSC5_MAIN_CONFIG_HIGH 0x028A04
-#define GT96100_MPSC5_PROTOCOL_CONFIG 0x028A08
-#define GT96100_MPSC_CHAN5_REG1 0x028A0C
-#define GT96100_MPSC_CHAN5_REG2 0x028A10
-#define GT96100_MPSC_CHAN5_REG3 0x028A14
-#define GT96100_MPSC_CHAN5_REG4 0x028A18
-#define GT96100_MPSC_CHAN5_REG5 0x028A1C
-#define GT96100_MPSC_CHAN5_REG6 0x028A20
-#define GT96100_MPSC_CHAN5_REG7 0x028A24
-#define GT96100_MPSC_CHAN5_REG8 0x028A28
-#define GT96100_MPSC_CHAN5_REG9 0x028A2C
-#define GT96100_MPSC_CHAN5_REG10 0x028A30
-#define GT96100_MPSC_CHAN5_REG11 0x028A34
-#define GT96100_MPSC6_MAIN_CONFIG_LOW 0x030A00
-#define GT96100_MPSC6_MAIN_CONFIG_HIGH 0x030A04
-#define GT96100_MPSC6_PROTOCOL_CONFIG 0x030A08
-#define GT96100_MPSC_CHAN6_REG1 0x030A0C
-#define GT96100_MPSC_CHAN6_REG2 0x030A10
-#define GT96100_MPSC_CHAN6_REG3 0x030A14
-#define GT96100_MPSC_CHAN6_REG4 0x030A18
-#define GT96100_MPSC_CHAN6_REG5 0x030A1C
-#define GT96100_MPSC_CHAN6_REG6 0x030A20
-#define GT96100_MPSC_CHAN6_REG7 0x030A24
-#define GT96100_MPSC_CHAN6_REG8 0x030A28
-#define GT96100_MPSC_CHAN6_REG9 0x030A2C
-#define GT96100_MPSC_CHAN6_REG10 0x030A30
-#define GT96100_MPSC_CHAN6_REG11 0x030A34
-#define GT96100_MPSC7_MAIN_CONFIG_LOW 0x038A00
-#define GT96100_MPSC7_MAIN_CONFIG_HIGH 0x038A04
-#define GT96100_MPSC7_PROTOCOL_CONFIG 0x038A08
-#define GT96100_MPSC_CHAN7_REG1 0x038A0C
-#define GT96100_MPSC_CHAN7_REG2 0x038A10
-#define GT96100_MPSC_CHAN7_REG3 0x038A14
-#define GT96100_MPSC_CHAN7_REG4 0x038A18
-#define GT96100_MPSC_CHAN7_REG5 0x038A1C
-#define GT96100_MPSC_CHAN7_REG6 0x038A20
-#define GT96100_MPSC_CHAN7_REG7 0x038A24
-#define GT96100_MPSC_CHAN7_REG8 0x038A28
-#define GT96100_MPSC_CHAN7_REG9 0x038A2C
-#define GT96100_MPSC_CHAN7_REG10 0x038A30
-#define GT96100_MPSC_CHAN7_REG11 0x038A34
-/* FlexTDMs */
-/* TDPR0 - Transmit Dual Port RAM. block size 0xff */
-#define GT96100_FXTDM0_TDPR0_BLK0_BASE 0x000B00
-#define GT96100_FXTDM0_TDPR0_BLK1_BASE 0x001B00
-#define GT96100_FXTDM0_TDPR0_BLK2_BASE 0x002B00
-#define GT96100_FXTDM0_TDPR0_BLK3_BASE 0x003B00
-/* RDPR0 - Receive Dual Port RAM. block size 0xff */
-#define GT96100_FXTDM0_RDPR0_BLK0_BASE 0x004B00
-#define GT96100_FXTDM0_RDPR0_BLK1_BASE 0x005B00
-#define GT96100_FXTDM0_RDPR0_BLK2_BASE 0x006B00
-#define GT96100_FXTDM0_RDPR0_BLK3_BASE 0x007B00
-#define GT96100_FXTDM0_TX_READ_PTR 0x008B00
-#define GT96100_FXTDM0_RX_READ_PTR 0x008B04
-#define GT96100_FXTDM0_CONFIG 0x008B08
-#define GT96100_FXTDM0_AUX_CHANA_TX 0x008B0C
-#define GT96100_FXTDM0_AUX_CHANA_RX 0x008B10
-#define GT96100_FXTDM0_AUX_CHANB_TX 0x008B14
-#define GT96100_FXTDM0_AUX_CHANB_RX 0x008B18
-#define GT96100_FXTDM1_TDPR1_BLK0_BASE 0x010B00
-#define GT96100_FXTDM1_TDPR1_BLK1_BASE 0x011B00
-#define GT96100_FXTDM1_TDPR1_BLK2_BASE 0x012B00
-#define GT96100_FXTDM1_TDPR1_BLK3_BASE 0x013B00
-#define GT96100_FXTDM1_RDPR1_BLK0_BASE 0x014B00
-#define GT96100_FXTDM1_RDPR1_BLK1_BASE 0x015B00
-#define GT96100_FXTDM1_RDPR1_BLK2_BASE 0x016B00
-#define GT96100_FXTDM1_RDPR1_BLK3_BASE 0x017B00
-#define GT96100_FXTDM1_TX_READ_PTR 0x018B00
-#define GT96100_FXTDM1_RX_READ_PTR 0x018B04
-#define GT96100_FXTDM1_CONFIG 0x018B08
-#define GT96100_FXTDM1_AUX_CHANA_TX 0x018B0C
-#define GT96100_FXTDM1_AUX_CHANA_RX 0x018B10
-#define GT96100_FLTDM1_AUX_CHANB_TX 0x018B14
-#define GT96100_FLTDM1_AUX_CHANB_RX 0x018B18
-#define GT96100_FLTDM2_TDPR2_BLK0_BASE 0x020B00
-#define GT96100_FLTDM2_TDPR2_BLK1_BASE 0x021B00
-#define GT96100_FLTDM2_TDPR2_BLK2_BASE 0x022B00
-#define GT96100_FLTDM2_TDPR2_BLK3_BASE 0x023B00
-#define GT96100_FLTDM2_RDPR2_BLK0_BASE 0x024B00
-#define GT96100_FLTDM2_RDPR2_BLK1_BASE 0x025B00
-#define GT96100_FLTDM2_RDPR2_BLK2_BASE 0x026B00
-#define GT96100_FLTDM2_RDPR2_BLK3_BASE 0x027B00
-#define GT96100_FLTDM2_TX_READ_PTR 0x028B00
-#define GT96100_FLTDM2_RX_READ_PTR 0x028B04
-#define GT96100_FLTDM2_CONFIG 0x028B08
-#define GT96100_FLTDM2_AUX_CHANA_TX 0x028B0C
-#define GT96100_FLTDM2_AUX_CHANA_RX 0x028B10
-#define GT96100_FLTDM2_AUX_CHANB_TX 0x028B14
-#define GT96100_FLTDM2_AUX_CHANB_RX 0x028B18
-#define GT96100_FLTDM3_TDPR3_BLK0_BASE 0x030B00
-#define GT96100_FLTDM3_TDPR3_BLK1_BASE 0x031B00
-#define GT96100_FLTDM3_TDPR3_BLK2_BASE 0x032B00
-#define GT96100_FLTDM3_TDPR3_BLK3_BASE 0x033B00
-#define GT96100_FXTDM3_RDPR3_BLK0_BASE 0x034B00
-#define GT96100_FXTDM3_RDPR3_BLK1_BASE 0x035B00
-#define GT96100_FXTDM3_RDPR3_BLK2_BASE 0x036B00
-#define GT96100_FXTDM3_RDPR3_BLK3_BASE 0x037B00
-#define GT96100_FXTDM3_TX_READ_PTR 0x038B00
-#define GT96100_FXTDM3_RX_READ_PTR 0x038B04
-#define GT96100_FXTDM3_CONFIG 0x038B08
-#define GT96100_FXTDM3_AUX_CHANA_TX 0x038B0C
-#define GT96100_FXTDM3_AUX_CHANA_RX 0x038B10
-#define GT96100_FXTDM3_AUX_CHANB_TX 0x038B14
-#define GT96100_FXTDM3_AUX_CHANB_RX 0x038B18
-/* Baud Rate Generators */
-#define GT96100_BRG0_CONFIG 0x102A00
-#define GT96100_BRG0_BAUD_TUNE 0x102A04
-#define GT96100_BRG1_CONFIG 0x102A08
-#define GT96100_BRG1_BAUD_TUNE 0x102A0C
-#define GT96100_BRG2_CONFIG 0x102A10
-#define GT96100_BRG2_BAUD_TUNE 0x102A14
-#define GT96100_BRG3_CONFIG 0x102A18
-#define GT96100_BRG3_BAUD_TUNE 0x102A1C
-#define GT96100_BRG4_CONFIG 0x102A20
-#define GT96100_BRG4_BAUD_TUNE 0x102A24
-#define GT96100_BRG5_CONFIG 0x102A28
-#define GT96100_BRG5_BAUD_TUNE 0x102A2C
-#define GT96100_BRG6_CONFIG 0x102A30
-#define GT96100_BRG6_BAUD_TUNE 0x102A34
-#define GT96100_BRG7_CONFIG 0x102A38
-#define GT96100_BRG7_BAUD_TUNE 0x102A3C
-/* Routing Registers */
-#define GT96100_ROUTE_MAIN 0x101A00
-#define GT96100_ROUTE_RX_CLOCK 0x101A10
-#define GT96100_ROUTE_TX_CLOCK 0x101A20
-/* General Purpose Ports */
-#define GT96100_GPP_CONFIG0 0x100A00
-#define GT96100_GPP_CONFIG1 0x100A04
-#define GT96100_GPP_CONFIG2 0x100A08
-#define GT96100_GPP_CONFIG3 0x100A0C
-#define GT96100_GPP_IO0 0x100A20
-#define GT96100_GPP_IO1 0x100A24
-#define GT96100_GPP_IO2 0x100A28
-#define GT96100_GPP_IO3 0x100A2C
-#define GT96100_GPP_DATA0 0x100A40
-#define GT96100_GPP_DATA1 0x100A44
-#define GT96100_GPP_DATA2 0x100A48
-#define GT96100_GPP_DATA3 0x100A4C
-#define GT96100_GPP_LEVEL0 0x100A60
-#define GT96100_GPP_LEVEL1 0x100A64
-#define GT96100_GPP_LEVEL2 0x100A68
-#define GT96100_GPP_LEVEL3 0x100A6C
-/* Watchdog */
-#define GT96100_WD_CONFIG 0x101A80
-#define GT96100_WD_VALUE 0x101A84
-/* Communication Unit Arbiter */
-#define GT96100_COMM_UNIT_ARBTR_CONFIG 0x101AC0
-/* PCI Arbiters */
-#define GT96100_PCI0_ARBTR_CONFIG 0x101AE0
-#define GT96100_PCI1_ARBTR_CONFIG 0x101AE4
-/* CIU Arbiter */
-#define GT96100_CIU_ARBITER_CONFIG 0x101AC0
-/* Interrupt Controller */
-#define GT96100_MAIN_CAUSE 0x000C18
-#define GT96100_INT0_MAIN_MASK 0x000C1C
-#define GT96100_INT1_MAIN_MASK 0x000C24
-#define GT96100_HIGH_CAUSE 0x000C98
-#define GT96100_INT0_HIGH_MASK 0x000C9C
-#define GT96100_INT1_HIGH_MASK 0x000CA4
-#define GT96100_INT0_SELECT 0x000C70
-#define GT96100_INT1_SELECT 0x000C74
-#define GT96100_SERIAL_CAUSE 0x103A00
-#define GT96100_SERINT0_MASK 0x103A80
-#define GT96100_SERINT1_MASK 0x103A88
-
-#endif /* _GT96100_H */
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index 25f5e8a..0fe0294 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -12,252 +12,53 @@
#ifdef __ASSEMBLY__
-
- .macro _ssnop
- sll $0, $0, 1
- .endm
-
- .macro _ehb
- sll $0, $0, 3
- .endm
-
-/*
- * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
- * use of the JTLB for instructions should not occur for 4 cpu cycles and use
- * for data translations should not occur for 3 cpu cycles.
- */
-#ifdef CONFIG_CPU_RM9000
-
- .macro mtc0_tlbw_hazard
- .set push
- .set mips32
- _ssnop; _ssnop; _ssnop; _ssnop
- .set pop
- .endm
-
- .macro tlbw_eret_hazard
- .set push
- .set mips32
- _ssnop; _ssnop; _ssnop; _ssnop
- .set pop
- .endm
-
+#define ASMMACRO(name, code...) .macro name; code; .endm
#else
-/*
- * The taken branch will result in a two cycle penalty for the two killed
- * instructions on R4000 / R4400. Other processors only have a single cycle
- * hazard so this is nice trick to have an optimal code for a range of
- * processors.
- */
- .macro mtc0_tlbw_hazard
- b . + 8
- .endm
+#define ASMMACRO(name, code...) \
+__asm__(".macro " #name "; " #code "; .endm"); \
+ \
+static inline void name(void) \
+{ \
+ __asm__ __volatile__ (#name); \
+}
- .macro tlbw_eret_hazard
- .endm
#endif
+ASMMACRO(_ssnop,
+ sll $0, $0, 1
+ )
+
+ASMMACRO(_ehb,
+ sll $0, $0, 3
+ )
+
/*
- * mtc0->mfc0 hazard
- * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
- * It is a MIPS32R2 processor so ehb will clear the hazard.
+ * TLB hazards
+ */
+#if defined(CONFIG_CPU_MIPSR2)
+
+/*
+ * MIPSR2 defines ehb for hazard avoidance
*/
-#ifdef CONFIG_CPU_MIPSR2
-/*
- * Use a macro for ehb unless explicit support for MIPSR2 is enabled
- */
-
-#define irq_enable_hazard \
+ASMMACRO(mtc0_tlbw_hazard,
+ _ehb
+ )
+ASMMACRO(tlbw_use_hazard,
+ _ehb
+ )
+ASMMACRO(tlb_probe_hazard,
+ _ehb
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
_ehb
-
-#define irq_disable_hazard \
- _ehb
-
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
-
-/*
- * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
- */
-
-#define irq_enable_hazard
-
-#define irq_disable_hazard
-
-#else
-
-/*
- * Classic MIPS needs 1 - 3 nops or ssnops
- */
-#define irq_enable_hazard
-#define irq_disable_hazard \
- _ssnop; _ssnop; _ssnop
-
-#endif
-
-#else /* __ASSEMBLY__ */
-
-__asm__(
- " .macro _ssnop \n"
- " sll $0, $0, 1 \n"
- " .endm \n"
- " \n"
- " .macro _ehb \n"
- " sll $0, $0, 3 \n"
- " .endm \n");
-
-#ifdef CONFIG_CPU_RM9000
-
-/*
- * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
- * use of the JTLB for instructions should not occur for 4 cpu cycles and use
- * for data translations should not occur for 3 cpu cycles.
- */
-
-#define mtc0_tlbw_hazard() \
- __asm__ __volatile__( \
- " .set mips32 \n" \
- " _ssnop \n" \
- " _ssnop \n" \
- " _ssnop \n" \
- " _ssnop \n" \
- " .set mips0 \n")
-
-#define tlbw_use_hazard() \
- __asm__ __volatile__( \
- " .set mips32 \n" \
- " _ssnop \n" \
- " _ssnop \n" \
- " _ssnop \n" \
- " _ssnop \n" \
- " .set mips0 \n")
-
-#else
-
-/*
- * Overkill warning ...
- */
-#define mtc0_tlbw_hazard() \
- __asm__ __volatile__( \
- " .set noreorder \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " .set reorder \n")
-
-#define tlbw_use_hazard() \
- __asm__ __volatile__( \
- " .set noreorder \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- " .set reorder \n")
-
-#endif
-
-/*
- * Interrupt enable/disable hazards
- * Some processors have hazards when modifying
- * the status register to change the interrupt state
- */
-
-#ifdef CONFIG_CPU_MIPSR2
-
-__asm__(" .macro irq_enable_hazard \n"
- " _ehb \n"
- " .endm \n"
- " \n"
- " .macro irq_disable_hazard \n"
- " _ehb \n"
- " .endm \n");
-
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
-
-/*
- * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
- */
-
-__asm__(
- " .macro irq_enable_hazard \n"
- " .endm \n"
- " \n"
- " .macro irq_disable_hazard \n"
- " .endm \n");
-
-#else
-
-/*
- * Default for classic MIPS processors. Assume worst case hazards but don't
- * care about the irq_enable_hazard - sooner or later the hardware will
- * enable it and we don't care when exactly.
- */
-
-__asm__(
- " # \n"
- " # There is a hazard but we do not care \n"
- " # \n"
- " .macro\tirq_enable_hazard \n"
- " .endm \n"
- " \n"
- " .macro\tirq_disable_hazard \n"
- " _ssnop \n"
- " _ssnop \n"
- " _ssnop \n"
- " .endm \n");
-
-#endif
-
-#define irq_enable_hazard() \
- __asm__ __volatile__("irq_enable_hazard")
-#define irq_disable_hazard() \
- __asm__ __volatile__("irq_disable_hazard")
-
-
-/*
- * Back-to-back hazards -
- *
- * What is needed to separate a move to cp0 from a subsequent read from the
- * same cp0 register?
- */
-#ifdef CONFIG_CPU_MIPSR2
-
-__asm__(" .macro back_to_back_c0_hazard \n"
- " _ehb \n"
- " .endm \n");
-
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
- defined(CONFIG_CPU_SB1)
-
-__asm__(" .macro back_to_back_c0_hazard \n"
- " .endm \n");
-
-#else
-
-__asm__(" .macro back_to_back_c0_hazard \n"
- " .set noreorder \n"
- " _ssnop \n"
- " _ssnop \n"
- " _ssnop \n"
- " .set reorder \n"
- " .endm");
-
-#endif
-
-#define back_to_back_c0_hazard() \
- __asm__ __volatile__("back_to_back_c0_hazard")
-
-
-/*
- * Instruction execution hazard
- */
-#ifdef CONFIG_CPU_MIPSR2
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ _ehb
+ )
/*
* gcc has a tradition of misscompiling the previous construct using the
* address of a label as argument to inline assembler. Gas otoh has the
@@ -279,12 +80,101 @@
: "=r" (tmp)); \
} while (0)
-#else
+#elif defined(CONFIG_CPU_R10000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+ )
+ASMMACRO(tlbw_use_hazard,
+ )
+ASMMACRO(tlb_probe_hazard,
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ )
#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_RM9000)
+
+/*
+ * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
+ * use of the JTLB for instructions should not occur for 4 cpu cycles and use
+ * for data translations should not occur for 3 cpu cycles.
+ */
+
+ASMMACRO(mtc0_tlbw_hazard,
+ _ssnop; _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(tlbw_use_hazard,
+ _ssnop; _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(tlb_probe_hazard,
+ _ssnop; _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ )
+#define instruction_hazard() do { } while (0)
+
+#elif defined(CONFIG_CPU_SB1)
+
+/*
+ * Mostly like R4000 for historic reasons
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+ )
+ASMMACRO(tlbw_use_hazard,
+ )
+ASMMACRO(tlb_probe_hazard,
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
+ _ssnop; _ssnop; _ssnop
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ )
+#define instruction_hazard() do { } while (0)
+
+#else
+
+/*
+ * Finally the catchall case for all other processors including R4000, R4400,
+ * R4600, R4700, R5000, RM7000, NEC VR41xx etc.
+ *
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400. Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+ASMMACRO(mtc0_tlbw_hazard,
+ nop
+ )
+ASMMACRO(tlbw_use_hazard,
+ nop; nop; nop
+ )
+ASMMACRO(tlb_probe_hazard,
+ nop; nop; nop
+ )
+ASMMACRO(irq_enable_hazard,
+ )
+ASMMACRO(irq_disable_hazard,
+ nop; nop; nop
+ )
+ASMMACRO(back_to_back_c0_hazard,
+ _ssnop; _ssnop; _ssnop;
+ )
+#define instruction_hazard() do { } while (0)
+
#endif
-extern void mips_ihb(void);
-
-#endif /* __ASSEMBLY__ */
-
#endif /* _ASM_HAZARDS_H */
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 896550b..d35c617 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -76,8 +76,4 @@
unsigned long hwmask);
#endif /* CONFIG_MIPS_MT_SMTC */
-#ifdef CONFIG_SMP
-#define ARCH_HAS_IRQ_PER_CPU
-#endif
-
#endif /* _ASM_IRQ_H */
diff --git a/include/asm-mips/mach-atlas/mc146818rtc.h b/include/asm-mips/mach-atlas/mc146818rtc.h
index 397522e..a73a569 100644
--- a/include/asm-mips/mach-atlas/mc146818rtc.h
+++ b/include/asm-mips/mach-atlas/mc146818rtc.h
@@ -28,10 +28,12 @@
#include <asm/mips-boards/atlas.h>
#include <asm/mips-boards/atlasint.h>
+#define ARCH_RTC_LOCATION
+
#define RTC_PORT(x) (ATLAS_RTC_ADR_REG + (x) * 8)
#define RTC_IO_EXTENT 0x100
#define RTC_IOMAPPED 0
-#define RTC_IRQ ATLASINT_RTC
+#define RTC_IRQ ATLAS_INT_RTC
static inline unsigned char CMOS_READ(unsigned long addr)
{
diff --git a/include/asm-mips/mach-ev96100/mach-gt64120.h b/include/asm-mips/mach-ev96100/mach-gt64120.h
deleted file mode 100644
index 0ef1e6c..0000000
--- a/include/asm-mips/mach-ev96100/mach-gt64120.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * This is a direct copy of the ev96100.h file, with a global
- * search and replace. The numbers are the same.
- *
- * The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef _ASM_GT64120_EV96100_GT64120_DEP_H
-#define _ASM_GT64120_EV96100_GT64120_DEP_H
-
-/*
- * GT96100 config space base address
- */
-#define GT64120_BASE (KSEG1ADDR(0x14000000))
-
-/*
- * PCI Bus allocation
- *
- * (Guessing ...)
- */
-#define GT_PCI_MEM_BASE 0x12000000UL
-#define GT_PCI_MEM_SIZE 0x02000000UL
-#define GT_PCI_IO_BASE 0x10000000UL
-#define GT_PCI_IO_SIZE 0x02000000UL
-#define GT_ISA_IO_BASE PCI_IO_BASE
-
-/*
- * Duart I/O ports.
- */
-#define EV96100_COM1_BASE_ADDR (0xBD000000 + 0x20)
-#define EV96100_COM2_BASE_ADDR (0xBD000000 + 0x00)
-
-
-/*
- * EV96100 interrupt controller register base.
- */
-#define EV96100_ICTRL_REGS_BASE (KSEG1ADDR(0x1f000000))
-
-/*
- * EV96100 UART register base.
- */
-#define EV96100_UART0_REGS_BASE EV96100_COM1_BASE_ADDR
-#define EV96100_UART1_REGS_BASE EV96100_COM2_BASE_ADDR
-#define EV96100_BASE_BAUD ( 3686400 / 16 )
-
-#endif /* _ASM_GT64120_EV96100_GT64120_DEP_H */
diff --git a/include/asm-mips/mach-excite/excite.h b/include/asm-mips/mach-excite/excite.h
index 130bd4b..4c29ba4 100644
--- a/include/asm-mips/mach-excite/excite.h
+++ b/include/asm-mips/mach-excite/excite.h
@@ -7,7 +7,7 @@
#define EXCITE_CPU_EXT_CLOCK 100000000
-#if !defined(__ASSEMBLER__)
+#if !defined(__ASSEMBLY__)
void __init excite_kgdb_init(void);
void excite_procfs_init(void);
extern unsigned long memsize;
diff --git a/arch/mips/basler/excite/excite_fpga.h b/include/asm-mips/mach-excite/excite_fpga.h
similarity index 100%
rename from arch/mips/basler/excite/excite_fpga.h
rename to include/asm-mips/mach-excite/excite_fpga.h
diff --git a/include/asm-mips/mach-qemu/cpu-feature-overrides.h b/include/asm-mips/mach-qemu/cpu-feature-overrides.h
index f4e370e..529445d 100644
--- a/include/asm-mips/mach-qemu/cpu-feature-overrides.h
+++ b/include/asm-mips/mach-qemu/cpu-feature-overrides.h
@@ -20,7 +20,7 @@
#define cpu_has_llsc 1
#define cpu_has_vtag_icache 0
-#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
+#define cpu_has_dc_aliases 0
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_dsp 0
diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
index fd7ebc5..b15e4ea 100644
--- a/include/asm-mips/mips-boards/atlasint.h
+++ b/include/asm-mips/mips-boards/atlasint.h
@@ -1,6 +1,7 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 1999, 2006 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
@@ -25,41 +26,88 @@
#ifndef _MIPS_ATLASINT_H
#define _MIPS_ATLASINT_H
-#define ATLASINT_BASE 1
-#define ATLASINT_UART (ATLASINT_BASE+0)
-#define ATLASINT_TIM0 (ATLASINT_BASE+1)
-#define ATLASINT_RES2 (ATLASINT_BASE+2)
-#define ATLASINT_RES3 (ATLASINT_BASE+3)
-#define ATLASINT_RTC (ATLASINT_BASE+4)
-#define ATLASINT_COREHI (ATLASINT_BASE+5)
-#define ATLASINT_CORELO (ATLASINT_BASE+6)
-#define ATLASINT_RES7 (ATLASINT_BASE+7)
-#define ATLASINT_PCIA (ATLASINT_BASE+8)
-#define ATLASINT_PCIB (ATLASINT_BASE+9)
-#define ATLASINT_PCIC (ATLASINT_BASE+10)
-#define ATLASINT_PCID (ATLASINT_BASE+11)
-#define ATLASINT_ENUM (ATLASINT_BASE+12)
-#define ATLASINT_DEG (ATLASINT_BASE+13)
-#define ATLASINT_ATXFAIL (ATLASINT_BASE+14)
-#define ATLASINT_INTA (ATLASINT_BASE+15)
-#define ATLASINT_INTB (ATLASINT_BASE+16)
-#define ATLASINT_ETH ATLASINT_INTB
-#define ATLASINT_INTC (ATLASINT_BASE+17)
-#define ATLASINT_SCSI ATLASINT_INTC
-#define ATLASINT_INTD (ATLASINT_BASE+18)
-#define ATLASINT_SERR (ATLASINT_BASE+19)
-#define ATLASINT_RES20 (ATLASINT_BASE+20)
-#define ATLASINT_RES21 (ATLASINT_BASE+21)
-#define ATLASINT_RES22 (ATLASINT_BASE+22)
-#define ATLASINT_RES23 (ATLASINT_BASE+23)
-#define ATLASINT_RES24 (ATLASINT_BASE+24)
-#define ATLASINT_RES25 (ATLASINT_BASE+25)
-#define ATLASINT_RES26 (ATLASINT_BASE+26)
-#define ATLASINT_RES27 (ATLASINT_BASE+27)
-#define ATLASINT_RES28 (ATLASINT_BASE+28)
-#define ATLASINT_RES29 (ATLASINT_BASE+29)
-#define ATLASINT_RES30 (ATLASINT_BASE+30)
-#define ATLASINT_RES31 (ATLASINT_BASE+31)
-#define ATLASINT_END (ATLASINT_BASE+31)
+/*
+ * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
+ */
+#define MIPSCPU_INT_BASE 0
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0 0
+#define MIPSCPU_INT_SW1 1
+#define MIPSCPU_INT_MB0 2
+#define MIPSCPU_INT_ATLAS MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1 3
+#define MIPSCPU_INT_MB2 4
+#define MIPSCPU_INT_MB3 5
+#define MIPSCPU_INT_MB4 6
+#define MIPSCPU_INT_CPUCTR 7
+
+/*
+ * Interrupts 8..39 are used for Atlas interrupt controller interrupts
+ */
+#define ATLAS_INT_BASE 8
+#define ATLAS_INT_UART (ATLAS_INT_BASE + 0)
+#define ATLAS_INT_TIM0 (ATLAS_INT_BASE + 1)
+#define ATLAS_INT_RES2 (ATLAS_INT_BASE + 2)
+#define ATLAS_INT_RES3 (ATLAS_INT_BASE + 3)
+#define ATLAS_INT_RTC (ATLAS_INT_BASE + 4)
+#define ATLAS_INT_COREHI (ATLAS_INT_BASE + 5)
+#define ATLAS_INT_CORELO (ATLAS_INT_BASE + 6)
+#define ATLAS_INT_RES7 (ATLAS_INT_BASE + 7)
+#define ATLAS_INT_PCIA (ATLAS_INT_BASE + 8)
+#define ATLAS_INT_PCIB (ATLAS_INT_BASE + 9)
+#define ATLAS_INT_PCIC (ATLAS_INT_BASE + 10)
+#define ATLAS_INT_PCID (ATLAS_INT_BASE + 11)
+#define ATLAS_INT_ENUM (ATLAS_INT_BASE + 12)
+#define ATLAS_INT_DEG (ATLAS_INT_BASE + 13)
+#define ATLAS_INT_ATXFAIL (ATLAS_INT_BASE + 14)
+#define ATLAS_INT_INTA (ATLAS_INT_BASE + 15)
+#define ATLAS_INT_INTB (ATLAS_INT_BASE + 16)
+#define ATLAS_INT_ETH ATLAS_INT_INTB
+#define ATLAS_INT_INTC (ATLAS_INT_BASE + 17)
+#define ATLAS_INT_SCSI ATLAS_INT_INTC
+#define ATLAS_INT_INTD (ATLAS_INT_BASE + 18)
+#define ATLAS_INT_SERR (ATLAS_INT_BASE + 19)
+#define ATLAS_INT_RES20 (ATLAS_INT_BASE + 20)
+#define ATLAS_INT_RES21 (ATLAS_INT_BASE + 21)
+#define ATLAS_INT_RES22 (ATLAS_INT_BASE + 22)
+#define ATLAS_INT_RES23 (ATLAS_INT_BASE + 23)
+#define ATLAS_INT_RES24 (ATLAS_INT_BASE + 24)
+#define ATLAS_INT_RES25 (ATLAS_INT_BASE + 25)
+#define ATLAS_INT_RES26 (ATLAS_INT_BASE + 26)
+#define ATLAS_INT_RES27 (ATLAS_INT_BASE + 27)
+#define ATLAS_INT_RES28 (ATLAS_INT_BASE + 28)
+#define ATLAS_INT_RES29 (ATLAS_INT_BASE + 29)
+#define ATLAS_INT_RES30 (ATLAS_INT_BASE + 30)
+#define ATLAS_INT_RES31 (ATLAS_INT_BASE + 31)
+#define ATLAS_INT_END (ATLAS_INT_BASE + 31)
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE 64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR 0
+#define MSC01C_INT_PCI 1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE 64
+
+/* SOC-it EIC interrupt offsets */
+#define MSC01E_INT_SW0 1
+#define MSC01E_INT_SW1 2
+#define MSC01E_INT_MB0 3
+#define MSC01E_INT_ATLAS MSC01E_INT_MB0
+#define MSC01E_INT_MB1 4
+#define MSC01E_INT_MB2 5
+#define MSC01E_INT_MB3 6
+#define MSC01E_INT_MB4 7
+#define MSC01E_INT_TMR 8
+#define MSC01E_INT_PCI 9
+#define MSC01E_INT_PERFCTR 10
+#define MSC01E_INT_CPUCTR 11
#endif /* !(_MIPS_ATLASINT_H) */
diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h
index 18b69de..fe065d6 100644
--- a/include/asm-mips/mmu_context.h
+++ b/include/asm-mips/mmu_context.h
@@ -262,10 +262,10 @@
/* See comments for similar code above */
prevvpe = dvpe();
oldasid = (read_c0_entryhi() & ASID_MASK);
- if(smtc_live_asid[mytlb][oldasid]) {
- smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
- if(smtc_live_asid[mytlb][oldasid] == 0)
- smtc_flush_tlb_asid(oldasid);
+ if (smtc_live_asid[mytlb][oldasid]) {
+ smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+ if(smtc_live_asid[mytlb][oldasid] == 0)
+ smtc_flush_tlb_asid(oldasid);
}
/* See comments for similar code above */
write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index 219d359..85b258e 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -34,6 +34,8 @@
#ifndef __ASSEMBLY__
+#include <asm/cpu-features.h>
+
extern void clear_page(void * page);
extern void copy_page(void * to, void * from);
@@ -53,7 +55,7 @@
extern void (*flush_data_cache_page)(unsigned long addr);
clear_page(addr);
- if (pages_do_alias((unsigned long) addr, vaddr))
+ if (pages_do_alias((unsigned long) addr, vaddr & PAGE_MASK))
flush_data_cache_page((unsigned long)addr);
}
@@ -63,7 +65,8 @@
extern void (*flush_data_cache_page)(unsigned long addr);
copy_page(vto, vfrom);
- if (pages_do_alias((unsigned long)vto, vaddr))
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
flush_data_cache_page((unsigned long)vto);
}
@@ -74,15 +77,17 @@
#ifdef CONFIG_CPU_MIPS32
typedef struct { unsigned long pte_low, pte_high; } pte_t;
#define pte_val(x) ((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+ #define __pte(x) ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
#else
typedef struct { unsigned long long pte; } pte_t;
#define pte_val(x) ((x).pte)
+ #define __pte(x) ((pte_t) { (x) } )
#endif
#else
typedef struct { unsigned long pte; } pte_t;
#define pte_val(x) ((x).pte)
-#endif
#define __pte(x) ((pte_t) { (x) } )
+#endif
/*
* For 3-level pagetables we defines these ourselves, for 2-level the
diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h
index c59a1e2..d05fb6f 100644
--- a/include/asm-mips/pgtable-64.h
+++ b/include/asm-mips/pgtable-64.h
@@ -93,8 +93,12 @@
#define PTRS_PER_PMD ((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t))
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+#if PGDIR_SIZE >= TASK_SIZE
+#define USER_PTRS_PER_PGD (1)
+#else
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS 0
+#endif
+#define FIRST_USER_ADDRESS 0UL
#define VMALLOC_START MAP_BASE
#define VMALLOC_END \
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
index 4113316..4fb0fc4 100644
--- a/include/asm-mips/ptrace.h
+++ b/include/asm-mips/ptrace.h
@@ -10,8 +10,6 @@
#define _ASM_PTRACE_H
-#include <asm/isadep.h>
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
@@ -73,6 +71,7 @@
#ifdef __KERNEL__
#include <linux/linkage.h>
+#include <asm/isadep.h>
/*
* Does the process account for user or for system time?
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 584bd9c0..035637c 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -52,9 +52,9 @@
#endif
/*
- * Both Galileo boards have the same UART mappings.
+ * Galileo EV64120 evaluation board
*/
-#if defined (CONFIG_MIPS_EV96100) || defined (CONFIG_MIPS_EV64120)
+#ifdef CONFIG_MIPS_EV64120
#include <asm/galileo-boards/ev96100.h>
#include <asm/galileo-boards/ev96100int.h>
#define EV96100_SERIAL_PORT_DEFNS \
diff --git a/include/asm-mips/sibyte/sb1250_defs.h b/include/asm-mips/sibyte/sb1250_defs.h
index 335dbaf..a885491 100644
--- a/include/asm-mips/sibyte/sb1250_defs.h
+++ b/include/asm-mips/sibyte/sb1250_defs.h
@@ -212,7 +212,7 @@
* Note: you'll need to define uint32_t and uint64_t in your headers.
*/
-#if !defined(__ASSEMBLER__)
+#if !defined(__ASSEMBLY__)
#define _SB_MAKE64(x) ((uint64_t)(x))
#define _SB_MAKE32(x) ((uint32_t)(x))
#else
@@ -251,9 +251,9 @@
*/
-#if defined(__mips64) && !defined(__ASSEMBLER__)
+#if defined(__mips64) && !defined(__ASSEMBLY__)
#define SBWRITECSR(csr,val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val)
#define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr)))
-#endif /* __ASSEMBLER__ */
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h
index f4178bd..7ed0bb6 100644
--- a/include/asm-mips/sibyte/sb1250_scd.h
+++ b/include/asm-mips/sibyte/sb1250_scd.h
@@ -149,7 +149,7 @@
* (For the assembler version, sysrev and dest may be the same register.
* Also, it clobbers AT.)
*/
-#ifdef __ASSEMBLER__
+#ifdef __ASSEMBLY__
#define SYS_SOC_TYPE(dest, sysrev) \
.set push ; \
.set reorder ; \
diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h
index 87a1dff..8b391a2 100644
--- a/include/asm-mips/signal.h
+++ b/include/asm-mips/signal.h
@@ -108,17 +108,8 @@
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
-#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility:
- set only the low 32 bit of the sigset. */
-/* Type of a signal handler. */
-typedef void __signalfn_t(int);
-typedef __signalfn_t __user *__sighandler_t;
-
-/* Fake signal functions */
-#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
-#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
-#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+#include <asm-generic/signal.h>
struct sigaction {
unsigned int sa_flags;
diff --git a/include/asm-mips/spinlock.h b/include/asm-mips/spinlock.h
index 669b8e3..4c1a1b5 100644
--- a/include/asm-mips/spinlock.h
+++ b/include/asm-mips/spinlock.h
@@ -239,7 +239,51 @@
: "memory");
}
-#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+ unsigned int tmp;
+ int ret;
+
+ if (R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_read_trylock \n"
+ " li %2, 0 \n"
+ "1: ll %1, %3 \n"
+ " bnez %1, 2f \n"
+ " addu %1, 1 \n"
+ " sc %1, %0 \n"
+ " beqzl %1, 1b \n"
+ " .set reorder \n"
+#ifdef CONFIG_SMP
+ " sync \n"
+#endif
+ " li %2, 1 \n"
+ "2: \n"
+ : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : "m" (rw->lock)
+ : "memory");
+ } else {
+ __asm__ __volatile__(
+ " .set noreorder # __raw_read_trylock \n"
+ " li %2, 0 \n"
+ "1: ll %1, %3 \n"
+ " bnez %1, 2f \n"
+ " addu %1, 1 \n"
+ " sc %1, %0 \n"
+ " beqz %1, 1b \n"
+ " .set reorder \n"
+#ifdef CONFIG_SMP
+ " sync \n"
+#endif
+ " li %2, 1 \n"
+ "2: \n"
+ : "=m" (rw->lock), "=&r" (tmp), "=&r" (ret)
+ : "m" (rw->lock)
+ : "memory");
+ }
+
+ return ret;
+}
static inline int __raw_write_trylock(raw_rwlock_t *rw)
{
@@ -283,4 +327,5 @@
return ret;
}
+
#endif /* _ASM_SPINLOCK_H */
diff --git a/include/asm-mips/timex.h b/include/asm-mips/timex.h
index 98aa737..b80de8e 100644
--- a/include/asm-mips/timex.h
+++ b/include/asm-mips/timex.h
@@ -8,6 +8,8 @@
#ifndef _ASM_TIMEX_H
#define _ASM_TIMEX_H
+#ifdef __KERNEL__
+
#include <asm/mipsregs.h>
/*
@@ -51,4 +53,6 @@
return read_c0_count();
}
+#endif /* __KERNEL__ */
+
#endif /* _ASM_TIMEX_H */
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index 610ccb8..c391429 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -313,7 +313,7 @@
#define __NR_mknodat (__NR_Linux + 290)
#define __NR_fchownat (__NR_Linux + 291)
#define __NR_futimesat (__NR_Linux + 292)
-#define __NR_fstatat (__NR_Linux + 293)
+#define __NR_fstatat64 (__NR_Linux + 293)
#define __NR_unlinkat (__NR_Linux + 294)
#define __NR_renameat (__NR_Linux + 295)
#define __NR_linkat (__NR_Linux + 296)
@@ -329,16 +329,18 @@
#define __NR_tee (__NR_Linux + 306)
#define __NR_vmsplice (__NR_Linux + 307)
#define __NR_move_pages (__NR_Linux + 308)
+#define __NR_set_robust_list (__NR_Linux + 309)
+#define __NR_get_robust_list (__NR_Linux + 310)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 308
+#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 308
+#define __NR_O32_Linux_syscalls 310
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -598,7 +600,7 @@
#define __NR_mknodat (__NR_Linux + 249)
#define __NR_fchownat (__NR_Linux + 250)
#define __NR_futimesat (__NR_Linux + 251)
-#define __NR_fstatat (__NR_Linux + 252)
+#define __NR_newfstatat (__NR_Linux + 252)
#define __NR_unlinkat (__NR_Linux + 253)
#define __NR_renameat (__NR_Linux + 254)
#define __NR_linkat (__NR_Linux + 255)
@@ -614,16 +616,18 @@
#define __NR_tee (__NR_Linux + 265)
#define __NR_vmsplice (__NR_Linux + 266)
#define __NR_move_pages (__NR_Linux + 267)
+#define __NR_set_robust_list (__NR_Linux + 268)
+#define __NR_get_robust_list (__NR_Linux + 269)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 267
+#define __NR_Linux_syscalls 269
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 267
+#define __NR_64_Linux_syscalls 269
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -887,7 +891,7 @@
#define __NR_mknodat (__NR_Linux + 253)
#define __NR_fchownat (__NR_Linux + 254)
#define __NR_futimesat (__NR_Linux + 255)
-#define __NR_fstatat (__NR_Linux + 256)
+#define __NR_newfstatat (__NR_Linux + 256)
#define __NR_unlinkat (__NR_Linux + 257)
#define __NR_renameat (__NR_Linux + 258)
#define __NR_linkat (__NR_Linux + 259)
@@ -903,16 +907,18 @@
#define __NR_tee (__NR_Linux + 269)
#define __NR_vmsplice (__NR_Linux + 270)
#define __NR_move_pages (__NR_Linux + 271)
+#define __NR_set_robust_list (__NR_Linux + 272)
+#define __NR_get_robust_list (__NR_Linux + 273)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 271
+#define __NR_Linux_syscalls 273
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 271
+#define __NR_N32_Linux_syscalls 273
#ifdef __KERNEL__
diff --git a/include/asm-mips/user.h b/include/asm-mips/user.h
index 89bf8b4..61f2a09 100644
--- a/include/asm-mips/user.h
+++ b/include/asm-mips/user.h
@@ -8,6 +8,8 @@
#ifndef _ASM_USER_H
#define _ASM_USER_H
+#ifdef __KERNEL__
+
#include <asm/page.h>
#include <asm/reg.h>
@@ -55,4 +57,6 @@
#define HOST_DATA_START_ADDR (u.start_data)
#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+#endif /* __KERNEL__ */
+
#endif /* _ASM_USER_H */
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 02b942d..d49c54c 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -342,9 +342,11 @@
#ifdef __KERNEL__
+#include <linux/err.h>
+
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-4095)) {\
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
errno = -(res); \
res = -1; \
} \
diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h
index 720afc1..b860218 100644
--- a/include/asm-sh/addrspace.h
+++ b/include/asm-sh/addrspace.h
@@ -14,11 +14,19 @@
#include <asm/cpu/addrspace.h>
/* Memory segments (32bit Privileged mode addresses) */
+#ifndef CONFIG_CPU_SH2A
#define P0SEG 0x00000000
#define P1SEG 0x80000000
#define P2SEG 0xa0000000
#define P3SEG 0xc0000000
#define P4SEG 0xe0000000
+#else
+#define P0SEG 0x00000000
+#define P1SEG 0x00000000
+#define P2SEG 0x20000000
+#define P3SEG 0x00000000
+#define P4SEG 0x80000000
+#endif
/* Returns the privileged segment base of a given address */
#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
diff --git a/include/asm-sh/adx/io.h b/include/asm-sh/adx/io.h
deleted file mode 100644
index ab1225f..0000000
--- a/include/asm-sh/adx/io.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * include/asm-sh/io_adx.h
- *
- * Copyright (C) 2001 A&D Co., Ltd.
- *
- * This file may be copied or modified under the terms of the GNU
- * General Public License. See linux/COPYING for more information.
- *
- * IO functions for an A&D ADX Board
- */
-
-#ifndef _ASM_SH_IO_ADX_H
-#define _ASM_SH_IO_ADX_H
-
-#include <asm/io_generic.h>
-
-extern unsigned char adx_inb(unsigned long port);
-extern unsigned short adx_inw(unsigned long port);
-extern unsigned int adx_inl(unsigned long port);
-
-extern void adx_outb(unsigned char value, unsigned long port);
-extern void adx_outw(unsigned short value, unsigned long port);
-extern void adx_outl(unsigned int value, unsigned long port);
-
-extern unsigned char adx_inb_p(unsigned long port);
-extern void adx_outb_p(unsigned char value, unsigned long port);
-
-extern void adx_insb(unsigned long port, void *addr, unsigned long count);
-extern void adx_insw(unsigned long port, void *addr, unsigned long count);
-extern void adx_insl(unsigned long port, void *addr, unsigned long count);
-extern void adx_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void adx_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void adx_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned char adx_readb(unsigned long addr);
-extern unsigned short adx_readw(unsigned long addr);
-extern unsigned int adx_readl(unsigned long addr);
-extern void adx_writeb(unsigned char b, unsigned long addr);
-extern void adx_writew(unsigned short b, unsigned long addr);
-extern void adx_writel(unsigned int b, unsigned long addr);
-
-extern void * adx_ioremap(unsigned long offset, unsigned long size);
-extern void adx_iounmap(void *addr);
-
-extern unsigned long adx_isa_port2addr(unsigned long offset);
-
-extern void setup_adx(void);
-extern void init_adx_IRQ(void);
-
-#ifdef __WANT_IO_DEF
-
-#define __inb adx_inb
-#define __inw adx_inw
-#define __inl adx_inl
-#define __outb adx_outb
-#define __outw adx_outw
-#define __outl adx_outl
-
-#define __inb_p adx_inb_p
-#define __inw_p adx_inw
-#define __inl_p adx_inl
-#define __outb_p adx_outb_p
-#define __outw_p adx_outw
-#define __outl_p adx_outl
-
-#define __insb adx_insb
-#define __insw adx_insw
-#define __insl adx_insl
-#define __outsb adx_outsb
-#define __outsw adx_outsw
-#define __outsl adx_outsl
-
-#define __readb adx_readb
-#define __readw adx_readw
-#define __readl adx_readl
-#define __writeb adx_writeb
-#define __writew adx_writew
-#define __writel adx_writel
-
-#define __isa_port2addr adx_isa_port2addr
-#define __ioremap adx_ioremap
-#define __iounmap adx_iounmap
-
-#endif
-
-#endif /* _ASM_SH_IO_AANDD_H */
diff --git a/include/asm-sh/apm.h b/include/asm-sh/apm.h
new file mode 100644
index 0000000..8b091e9
--- /dev/null
+++ b/include/asm-sh/apm.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __ASM_SH_APM_H
+#define __ASM_SH_APM_H
+
+#define APM_AC_OFFLINE 0
+#define APM_AC_ONLINE 1
+#define APM_AC_BACKUP 2
+#define APM_AC_UNKNOWN 0xff
+
+#define APM_BATTERY_STATUS_HIGH 0
+#define APM_BATTERY_STATUS_LOW 1
+#define APM_BATTERY_STATUS_CRITICAL 2
+#define APM_BATTERY_STATUS_CHARGING 3
+#define APM_BATTERY_STATUS_NOT_PRESENT 4
+#define APM_BATTERY_STATUS_UNKNOWN 0xff
+
+#define APM_BATTERY_LIFE_UNKNOWN 0xFFFF
+#define APM_BATTERY_LIFE_MINUTES 0x8000
+#define APM_BATTERY_LIFE_VALUE_MASK 0x7FFF
+
+#define APM_BATTERY_FLAG_HIGH (1 << 0)
+#define APM_BATTERY_FLAG_LOW (1 << 1)
+#define APM_BATTERY_FLAG_CRITICAL (1 << 2)
+#define APM_BATTERY_FLAG_CHARGING (1 << 3)
+#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7)
+#define APM_BATTERY_FLAG_UNKNOWN 0xff
+
+#define APM_UNITS_MINS 0
+#define APM_UNITS_SECS 1
+#define APM_UNITS_UNKNOWN -1
+
+
+extern int (*apm_get_info)(char *buf, char **start, off_t fpos, int length);
+extern int apm_suspended;
+
+void apm_queue_event(apm_event_t event);
+
+#endif
diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h
index fb627de..8bdc1ba 100644
--- a/include/asm-sh/atomic.h
+++ b/include/asm-sh/atomic.h
@@ -14,6 +14,7 @@
#define atomic_read(v) ((v)->counter)
#define atomic_set(v,i) ((v)->counter = (i))
+#include <linux/compiler.h>
#include <asm/system.h>
/*
@@ -21,49 +22,110 @@
* forward to code at the end of this object's .text section, then
* branch back to restart the operation.
*/
-
-static __inline__ void atomic_add(int i, atomic_t * v)
+static inline void atomic_add(int i, atomic_t *v)
{
+#ifdef CONFIG_CPU_SH4A
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%3, %0 ! atomic_add \n"
+" add %2, %0 \n"
+" movco.l %0, @%3 \n"
+" bf 1b \n"
+ : "=&z" (tmp), "=r" (&v->counter)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+#else
unsigned long flags;
local_irq_save(flags);
*(long *)v += i;
local_irq_restore(flags);
+#endif
}
-static __inline__ void atomic_sub(int i, atomic_t *v)
+static inline void atomic_sub(int i, atomic_t *v)
{
+#ifdef CONFIG_CPU_SH4A
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%3, %0 ! atomic_sub \n"
+" sub %2, %0 \n"
+" movco.l %0, @%3 \n"
+" bf 1b \n"
+ : "=&z" (tmp), "=r" (&v->counter)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+#else
unsigned long flags;
local_irq_save(flags);
*(long *)v -= i;
local_irq_restore(flags);
+#endif
}
-static __inline__ int atomic_add_return(int i, atomic_t * v)
+/*
+ * SH-4A note:
+ *
+ * We basically get atomic_xxx_return() for free compared with
+ * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
+ * encoding, so the retval is automatically set without having to
+ * do any special work.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
{
- unsigned long temp, flags;
+ unsigned long temp;
+
+#ifdef CONFIG_CPU_SH4A
+ __asm__ __volatile__ (
+"1: movli.l @%3, %0 ! atomic_add_return \n"
+" add %2, %0 \n"
+" movco.l %0, @%3 \n"
+" bf 1b \n"
+" synco \n"
+ : "=&z" (temp), "=r" (&v->counter)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+#else
+ unsigned long flags;
local_irq_save(flags);
temp = *(long *)v;
temp += i;
*(long *)v = temp;
local_irq_restore(flags);
+#endif
return temp;
}
#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-static __inline__ int atomic_sub_return(int i, atomic_t * v)
+static inline int atomic_sub_return(int i, atomic_t *v)
{
- unsigned long temp, flags;
+ unsigned long temp;
+
+#ifdef CONFIG_CPU_SH4A
+ __asm__ __volatile__ (
+"1: movli.l @%3, %0 ! atomic_sub_return \n"
+" sub %2, %0 \n"
+" movco.l %0, @%3 \n"
+" bf 1b \n"
+" synco \n"
+ : "=&z" (temp), "=r" (&v->counter)
+ : "r" (i), "r" (&v->counter)
+ : "t");
+#else
+ unsigned long flags;
local_irq_save(flags);
temp = *(long *)v;
temp -= i;
*(long *)v = temp;
local_irq_restore(flags);
+#endif
return temp;
}
@@ -118,22 +180,48 @@
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v)
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
{
+#ifdef CONFIG_CPU_SH4A
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%3, %0 ! atomic_clear_mask \n"
+" and %2, %0 \n"
+" movco.l %0, @%3 \n"
+" bf 1b \n"
+ : "=&z" (tmp), "=r" (&v->counter)
+ : "r" (~mask), "r" (&v->counter)
+ : "t");
+#else
unsigned long flags;
local_irq_save(flags);
*(long *)v &= ~mask;
local_irq_restore(flags);
+#endif
}
-static __inline__ void atomic_set_mask(unsigned int mask, atomic_t *v)
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
{
+#ifdef CONFIG_CPU_SH4A
+ unsigned long tmp;
+
+ __asm__ __volatile__ (
+"1: movli.l @%3, %0 ! atomic_set_mask \n"
+" or %2, %0 \n"
+" movco.l %0, @%3 \n"
+" bf 1b \n"
+ : "=&z" (tmp), "=r" (&v->counter)
+ : "r" (mask), "r" (&v->counter)
+ : "t");
+#else
unsigned long flags;
local_irq_save(flags);
*(long *)v |= mask;
local_irq_restore(flags);
+#endif
}
/* Atomic operations are already serializing on SH */
diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h
index fc21e4d..1b6916e 100644
--- a/include/asm-sh/auxvec.h
+++ b/include/asm-sh/auxvec.h
@@ -1,4 +1,18 @@
#ifndef __ASM_SH_AUXVEC_H
#define __ASM_SH_AUXVEC_H
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them.
+ */
+
+#ifdef CONFIG_VSYSCALL
+/*
+ * Only define this in the vsyscall case, the entry point to
+ * the vsyscall page gets placed here. The kernel will attempt
+ * to build a gate VMA we don't care about otherwise..
+ */
+#define AT_SYSINFO_EHDR 33
+#endif
+
#endif /* __ASM_SH_AUXVEC_H */
diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h
index e34f825..1c16792 100644
--- a/include/asm-sh/bitops.h
+++ b/include/asm-sh/bitops.h
@@ -6,7 +6,7 @@
/* For __swab32 */
#include <asm/byteorder.h>
-static __inline__ void set_bit(int nr, volatile void * addr)
+static inline void set_bit(int nr, volatile void * addr)
{
int mask;
volatile unsigned int *a = addr;
@@ -24,7 +24,7 @@
*/
#define smp_mb__before_clear_bit() barrier()
#define smp_mb__after_clear_bit() barrier()
-static __inline__ void clear_bit(int nr, volatile void * addr)
+static inline void clear_bit(int nr, volatile void * addr)
{
int mask;
volatile unsigned int *a = addr;
@@ -37,7 +37,7 @@
local_irq_restore(flags);
}
-static __inline__ void change_bit(int nr, volatile void * addr)
+static inline void change_bit(int nr, volatile void * addr)
{
int mask;
volatile unsigned int *a = addr;
@@ -50,7 +50,7 @@
local_irq_restore(flags);
}
-static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+static inline int test_and_set_bit(int nr, volatile void * addr)
{
int mask, retval;
volatile unsigned int *a = addr;
@@ -66,7 +66,7 @@
return retval;
}
-static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+static inline int test_and_clear_bit(int nr, volatile void * addr)
{
int mask, retval;
volatile unsigned int *a = addr;
@@ -82,7 +82,7 @@
return retval;
}
-static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+static inline int test_and_change_bit(int nr, volatile void * addr)
{
int mask, retval;
volatile unsigned int *a = addr;
@@ -100,7 +100,7 @@
#include <asm-generic/bitops/non-atomic.h>
-static __inline__ unsigned long ffz(unsigned long word)
+static inline unsigned long ffz(unsigned long word)
{
unsigned long result;
@@ -120,7 +120,7 @@
*
* Undefined if no bit exists, so code should check against 0 first.
*/
-static __inline__ unsigned long __ffs(unsigned long word)
+static inline unsigned long __ffs(unsigned long word)
{
unsigned long result;
diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h
index a6de3d0..b4000c8 100644
--- a/include/asm-sh/bugs.h
+++ b/include/asm-sh/bugs.h
@@ -32,6 +32,10 @@
case CPU_SH7750 ... CPU_SH4_501:
*p++ = '4';
break;
+ case CPU_SH7770 ... CPU_SH7781:
+ *p++ = '4';
+ *p++ = 'a';
+ break;
default:
*p++ = '?';
*p++ = '!';
diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h
index 656fdfe..e3a180c 100644
--- a/include/asm-sh/cache.h
+++ b/include/asm-sh/cache.h
@@ -10,7 +10,6 @@
#ifdef __KERNEL__
#include <asm/cpu/cache.h>
-#include <asm/cpu/cacheflush.h>
#define SH_CACHE_VALID 1
#define SH_CACHE_UPDATED 2
@@ -23,24 +22,31 @@
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
struct cache_info {
- unsigned int ways;
- unsigned int sets;
- unsigned int linesz;
+ unsigned int ways; /* Number of cache ways */
+ unsigned int sets; /* Number of cache sets */
+ unsigned int linesz; /* Cache line size (bytes) */
+ unsigned int way_size; /* sets * line size */
+
+ /*
+ * way_incr is the address offset for accessing the next way
+ * in memory mapped cache array ops.
+ */
unsigned int way_incr;
-
unsigned int entry_shift;
unsigned int entry_mask;
+ /*
+ * Compute a mask which selects the address bits which overlap between
+ * 1. those used to select the cache set during indexing
+ * 2. those in the physical page number.
+ */
+ unsigned int alias_mask;
+
+ unsigned int n_aliases; /* Number of aliases */
+
unsigned long flags;
};
-/* Flush (write-back only) a region (smaller than a page) */
-extern void __flush_wback_region(void *start, int size);
-/* Flush (write-back & invalidate) a region (smaller than a page) */
-extern void __flush_purge_region(void *start, int size);
-/* Flush (invalidate only) a region (smaller than a page) */
-extern void __flush_invalidate_region(void *start, int size);
-
#endif /* __KERNEL__ */
#endif /* __ASM_SH_CACHE_H */
diff --git a/include/asm-sh/cacheflush.h b/include/asm-sh/cacheflush.h
index 9dfb33e..07f62ec 100644
--- a/include/asm-sh/cacheflush.h
+++ b/include/asm-sh/cacheflush.h
@@ -2,6 +2,7 @@
#define __ASM_SH_CACHEFLUSH_H
#ifdef __KERNEL__
+#include <linux/mm.h>
#include <asm/cpu/cacheflush.h>
/* Flush (write-back only) a region (smaller than a page) */
@@ -27,5 +28,7 @@
memcpy(dst, src, len); \
} while (0)
+#define HAVE_ARCH_UNMAPPED_AREA
+
#endif /* __KERNEL__ */
#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/include/asm-sh/cat68701/io.h b/include/asm-sh/cat68701/io.h
deleted file mode 100644
index 753b846..0000000
--- a/include/asm-sh/cat68701/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-sh/io_cat68701.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- * 2001 Yutarou Ebihar (ebihara@si-linux.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an AONE Corp. CAT-68701 SH7708 Borad
- */
-
-#ifndef _ASM_SH_IO_CAT68701_H
-#define _ASM_SH_IO_CAT68701_H
-
-extern unsigned long cat68701_isa_port2addr(unsigned long offset);
-extern int cat68701_irq_demux(int irq);
-
-extern void init_cat68701_IRQ(void);
-extern void heartbeat_cat68701(void);
-
-#endif /* _ASM_SH_IO_CAT68701_H */
diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h
index fa03b30..08168af 100644
--- a/include/asm-sh/checksum.h
+++ b/include/asm-sh/checksum.h
@@ -159,6 +159,7 @@
}
#define _HAVE_ARCH_IPV6_CSUM
+#ifdef CONFIG_IPV6
static __inline__ unsigned short int csum_ipv6_magic(struct in6_addr *saddr,
struct in6_addr *daddr,
__u32 len,
@@ -194,6 +195,7 @@
return csum_fold(sum);
}
+#endif
/*
* Copy and checksum to user
diff --git a/include/asm-sh/cpu-features.h b/include/asm-sh/cpu-features.h
new file mode 100644
index 0000000..4bccd7c0
--- /dev/null
+++ b/include/asm-sh/cpu-features.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_SH_CPU_FEATURES_H
+#define __ASM_SH_CPU_FEATURES_H
+
+/*
+ * Processor flags
+ *
+ * Note: When adding a new flag, keep cpu_flags[] in
+ * arch/sh/kernel/setup.c in sync so symbolic name
+ * mapping of the processor flags has a chance of being
+ * reasonably accurate.
+ *
+ * These flags are also available through the ELF
+ * auxiliary vector as AT_HWCAP.
+ */
+#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */
+#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */
+#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */
+#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */
+#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */
+#define CPU_HAS_PTEA 0x0020 /* PTEA register */
+#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */
+#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */
+
+#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/include/asm-sh/cpu-sh2/shmparam.h b/include/asm-sh/cpu-sh2/shmparam.h
deleted file mode 100644
index 817c182..0000000
--- a/include/asm-sh/cpu-sh2/shmparam.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-sh/cpu-sh2/shmparam.h
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH2_SHMPARAM_H
-#define __ASM_CPU_SH2_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* __ASM_CPU_SH2_SHMPARAM_H */
-
diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h
index 406aa8d..ffe08d2 100644
--- a/include/asm-sh/cpu-sh3/cache.h
+++ b/include/asm-sh/cpu-sh3/cache.h
@@ -26,12 +26,10 @@
#define CCR_CACHE_ENABLE CCR_CACHE_CE
#define CCR_CACHE_INVALIDATE CCR_CACHE_CF
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7710)
#define CCR3 0xa40000b4
#define CCR_CACHE_16KB 0x00010000
#define CCR_CACHE_32KB 0x00020000
#endif
-
#endif /* __ASM_CPU_SH3_CACHE_H */
-
diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/include/asm-sh/cpu-sh3/cacheflush.h
index f51aed0..03fde97 100644
--- a/include/asm-sh/cpu-sh3/cacheflush.h
+++ b/include/asm-sh/cpu-sh3/cacheflush.h
@@ -10,7 +10,7 @@
#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
#define __ASM_CPU_SH3_CACHEFLUSH_H
-/*
+/*
* Cache flushing:
*
* - flush_cache_all() flushes entire cache
@@ -35,53 +35,33 @@
/* 32KB cache, 4kb PAGE sizes need to check bit 12 */
#define CACHE_ALIAS 0x00001000
-struct page;
-struct mm_struct;
-struct vm_area_struct;
+#define PG_mapped PG_arch_1
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-extern void flush_dcache_page(struct page *pg);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+#else
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_icache_range(start, end) do { } while (0)
+#define flush_icache_page(vma,pg) do { } while (0)
+#endif
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
/* SH3 has unified cache so no special action needed here */
#define flush_cache_sigtramp(vaddr) do { } while (0)
-#define flush_page_to_ram(page) do { } while (0)
#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
#define p3_cache_init() do { } while (0)
-#define PG_mapped PG_arch_1
-
-/* We provide our own get_unmapped_area to avoid cache alias issue */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-#else
-
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_range(start, end) do { } while (0)
-#define flush_icache_page(vma,pg) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define flush_cache_sigtramp(vaddr) do { } while (0)
-
-#define p3_cache_init() do { } while (0)
-
-#define HAVE_ARCH_UNMAPPED_AREA
-
-#endif
-
#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
-
diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h
index b61b6e3..273f322 100644
--- a/include/asm-sh/cpu-sh3/freq.h
+++ b/include/asm-sh/cpu-sh3/freq.h
@@ -18,5 +18,9 @@
#define MIN_DIVISOR_NR 0
#define MAX_DIVISOR_NR 4
+#define FRQCR_CKOEN 0x0100
+#define FRQCR_PLLEN 0x0080
+#define FRQCR_PSTBY 0x0040
+
#endif /* __ASM_CPU_SH3_FREQ_H */
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h
index a844ea0..bccb7dd 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/include/asm-sh/cpu-sh3/mmu_context.h
@@ -27,8 +27,12 @@
#define TRA 0xffffffd0
#define EXPEVT 0xffffffd4
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710)
#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */
#else
#define INTEVT 0xffffffd8
diff --git a/include/asm-sh/cpu-sh3/shmparam.h b/include/asm-sh/cpu-sh3/shmparam.h
deleted file mode 100644
index da5b5ee..0000000
--- a/include/asm-sh/cpu-sh3/shmparam.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/shmparam.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_SHMPARAM_H
-#define __ASM_CPU_SH3_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* __ASM_CPU_SH3_SHMPARAM_H */
-
diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h
index 3d8e95e..b2394cf 100644
--- a/include/asm-sh/cpu-sh3/timer.h
+++ b/include/asm-sh/cpu-sh3/timer.h
@@ -20,9 +20,14 @@
* SH7710
* SH7720
* SH7300
+ * SH7710
* ---------------------------------------------------------------------------
*/
+#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
+#define TMU_TOCR 0xfffffe90 /* Byte access */
+#endif
+
#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710)
#define TMU_TSTR 0xa412fe92 /* Byte access */
@@ -39,9 +44,6 @@
#define TMU2_TCR 0xa412feb4 /* Word access */
#else
-#if !defined(CONFIG_CPU_SUBTYPE_SH7727)
-#define TMU_TOCR 0xfffffe90 /* Byte access */
-#endif
#define TMU_TSTR 0xfffffe92 /* Byte access */
#define TMU0_TCOR 0xfffffe94 /* Long access */
diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h
index 0f809de..9d308cb 100644
--- a/include/asm-sh/cpu-sh3/ubc.h
+++ b/include/asm-sh/cpu-sh3/ubc.h
@@ -11,6 +11,19 @@
#ifndef __ASM_CPU_SH3_UBC_H
#define __ASM_CPU_SH3_UBC_H
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#define UBC_BARA 0xa4ffffb0
+#define UBC_BAMRA 0xa4ffffb4
+#define UBC_BBRA 0xa4ffffb8
+#define UBC_BASRA 0xffffffe4
+#define UBC_BARB 0xa4ffffa0
+#define UBC_BAMRB 0xa4ffffa4
+#define UBC_BBRB 0xa4ffffa8
+#define UBC_BASRB 0xffffffe8
+#define UBC_BDRB 0xa4ffff90
+#define UBC_BDMRB 0xa4ffff94
+#define UBC_BRCR 0xa4ffff98
+#else
#define UBC_BARA 0xffffffb0
#define UBC_BAMRA 0xffffffb4
#define UBC_BBRA 0xffffffb8
@@ -22,6 +35,6 @@
#define UBC_BDRB 0xffffff90
#define UBC_BDMRB 0xffffff94
#define UBC_BRCR 0xffffff98
+#endif
#endif /* __ASM_CPU_SH3_UBC_H */
-
diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h
index 727634d..bb2e1b0 100644
--- a/include/asm-sh/cpu-sh4/addrspace.h
+++ b/include/asm-sh/cpu-sh4/addrspace.h
@@ -22,5 +22,8 @@
#define P4SEG_TLB_DATA 0xf7000000
#define P4SEG_REG_BASE 0xff000000
+#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
+#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
+
#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h
index 1fe2035..6e9c7e6 100644
--- a/include/asm-sh/cpu-sh4/cache.h
+++ b/include/asm-sh/cpu-sh4/cache.h
@@ -22,7 +22,9 @@
#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */
#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */
#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */
+#ifndef CONFIG_CPU_SUBTYPE_SH7780
#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */
+#endif
/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE)
diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h
index f323567..515fd57 100644
--- a/include/asm-sh/cpu-sh4/cacheflush.h
+++ b/include/asm-sh/cpu-sh4/cacheflush.h
@@ -16,40 +16,29 @@
* caching; in which case they're only semi-broken),
* so we need them.
*/
-
-/* Page is 4K, OC size is 16K, there are four lines. */
-#define CACHE_ALIAS 0x00003000
-
-struct page;
-struct mm_struct;
-struct vm_area_struct;
-
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-extern void flush_dcache_page(struct page *pg);
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+ unsigned long pfn);
+void flush_dcache_page(struct page *pg);
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_cache_sigtramp(unsigned long addr);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
- struct page *page, unsigned long addr,
- int len);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_cache_sigtramp(unsigned long addr);
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+ unsigned long addr, int len);
#define flush_icache_page(vma,pg) do { } while (0)
/* Initialization of P3 area for copy_user_page */
-extern void p3_cache_init(void);
+void p3_cache_init(void);
#define PG_mapped PG_arch_1
-/* We provide our own get_unmapped_area to avoid cache alias issue */
-#define HAVE_ARCH_UNMAPPED_AREA
-
#ifdef CONFIG_MMU
extern int remap_area_pages(unsigned long addr, unsigned long phys_addr,
unsigned long size, unsigned long flags);
@@ -61,4 +50,3 @@
}
#endif /* CONFIG_MMU */
#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
-
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/include/asm-sh/cpu-sh4/dma-sh7780.h
new file mode 100644
index 0000000..6c90d28
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/dma-sh7780.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
+#define __ASM_SH_CPU_SH4_DMA_SH7780_H
+
+#define REQ_HE 0x000000C0
+#define REQ_H 0x00000080
+#define REQ_LE 0x00000040
+#define TM_BURST 0x0000020
+#define TS_8 0x00000000
+#define TS_16 0x00000008
+#define TS_32 0x00000010
+#define TS_16BLK 0x00000018
+#define TS_32BLK 0x00100000
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+ XMIT_SZ_8BIT,
+ XMIT_SZ_16BIT,
+ XMIT_SZ_32BIT,
+ XMIT_SZ_128BIT,
+ XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int __attribute__ ((used)) ts_shift[] = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_128BIT] = 4,
+ [XMIT_SZ_256BIT] = 5,
+};
+
+#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
index 0dfe61f..3e4b3e6 100644
--- a/include/asm-sh/cpu-sh4/dma.h
+++ b/include/asm-sh/cpu-sh4/dma.h
@@ -1,11 +1,17 @@
#ifndef __ASM_CPU_SH4_DMA_H
#define __ASM_CPU_SH4_DMA_H
+#define DMAOR_INIT ( 0x8000 | DMAOR_DME )
+
#ifdef CONFIG_CPU_SH4A
#define SH_DMAC_BASE 0xfc808020
+
+#define CHCR_TS_MASK 0x18
+#define CHCR_TS_SHIFT 3
+
+#include <asm/cpu/dma-sh7780.h>
#else
#define SH_DMAC_BASE 0xffa00000
-#endif
/* Definitions for the SuperH DMAC */
#define TM_BURST 0x0000080
@@ -19,8 +25,6 @@
#define DMAOR_COD 0x00000008
-#define DMAOR_INIT ( 0x8000 | DMAOR_DME )
-
/*
* The SuperH DMAC supports a number of transmit sizes, we list them here,
* with their respective values as they appear in the CHCR registers.
@@ -45,5 +49,6 @@
[XMIT_SZ_32BIT] = 2,
[XMIT_SZ_256BIT] = 5,
};
+#endif
#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/shmparam.h b/include/asm-sh/cpu-sh4/shmparam.h
deleted file mode 100644
index a5a0aa9..0000000
--- a/include/asm-sh/cpu-sh4/shmparam.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/shmparam.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_SHMPARAM_H
-#define __ASM_CPU_SH4_SHMPARAM_H
-
-/*
- * SH-4 has D-cache alias issue
- */
-#define SHMLBA (PAGE_SIZE*4) /* attach addr a multiple of this */
-
-#endif /* __ASM_CPU_SH4_SHMPARAM_H */
-
diff --git a/include/asm-sh/cpu-sh4/sq.h b/include/asm-sh/cpu-sh4/sq.h
index 366b091..586d649 100644
--- a/include/asm-sh/cpu-sh4/sq.h
+++ b/include/asm-sh/cpu-sh4/sq.h
@@ -17,7 +17,7 @@
* Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
* mapped to any physical address space. Since data is written (and aligned)
* to 32-byte boundaries, we need to be sure that all allocations are aligned.
- */
+ */
#define SQ_SIZE 32
#define SQ_ALIGN_MASK (~(SQ_SIZE - 1))
#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
@@ -26,23 +26,10 @@
#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c)
#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000)
-struct sq_mapping {
- const char *name;
-
- unsigned long sq_addr;
- unsigned long addr;
- unsigned int size;
-
- struct list_head list;
-};
-
/* arch/sh/kernel/cpu/sh4/sq.c */
-extern struct sq_mapping *sq_remap(unsigned long phys, unsigned int size, const char *name);
-extern void sq_unmap(struct sq_mapping *map);
-
-extern void sq_clear(unsigned long addr, unsigned int len);
-extern void sq_flush(void *addr);
-extern void sq_flush_range(unsigned long start, unsigned int len);
+unsigned long sq_remap(unsigned long phys, unsigned int size,
+ const char *name, unsigned long flags);
+void sq_unmap(unsigned long vaddr);
+void sq_flush_range(unsigned long start, unsigned int len);
#endif /* __ASM_CPU_SH4_SQ_H */
-
diff --git a/include/asm-sh/cqreek/cqreek.h b/include/asm-sh/cqreek/cqreek.h
deleted file mode 100644
index 09aecc0..0000000
--- a/include/asm-sh/cqreek/cqreek.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_SH_CQREEK_CQREEK_H
-#define __ASM_SH_CQREEK_CQREEK_H
-
-#define BRIDGE_FEATURE 0x0002
-
-#define BRIDGE_IDE_CTRL 0x0018
-#define BRIDGE_IDE_INTR_LVL 0x001A
-#define BRIDGE_IDE_INTR_MASK 0x001C
-#define BRIDGE_IDE_INTR_STAT 0x001E
-
-#define BRIDGE_ISA_CTRL 0x0028
-#define BRIDGE_ISA_INTR_LVL 0x002A
-#define BRIDGE_ISA_INTR_MASK 0x002C
-#define BRIDGE_ISA_INTR_STAT 0x002E
-
-/* arch/sh/boards/cqreek/setup.c */
-extern void setup_cqreek(void);
-
-/* arch/sh/boards/cqreek/irq.c */
-extern int cqreek_has_ide, cqreek_has_isa;
-extern void init_cqreek_IRQ(void);
-
-/* arch/sh/boards/cqreek/io.c */
-extern unsigned long cqreek_port2addr(unsigned long port);
-
-#endif /* __ASM_SH_CQREEK_CQREEK_H */
-
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
index 124968f9..56cd4b9 100644
--- a/include/asm-sh/dma-mapping.h
+++ b/include/asm-sh/dma-mapping.h
@@ -141,25 +141,35 @@
}
}
-static void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction dir)
- __attribute__ ((alias("dma_sync_single")));
+static inline void dma_sync_single_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single(dev, dma_handle, size, dir);
+}
-static void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
+static inline void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle,
+ size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+ struct scatterlist *sg, int nelems,
enum dma_data_direction dir)
- __attribute__ ((alias("dma_sync_single")));
+{
+ dma_sync_sg(dev, sg, nelems, dir);
+}
-static void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
- __attribute__ ((alias("dma_sync_sg")));
+static inline void dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction dir)
+{
+ dma_sync_sg(dev, sg, nelems, dir);
+}
-static void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
- __attribute__ ((alias("dma_sync_sg")));
static inline int dma_get_cache_alignment(void)
{
@@ -174,6 +184,4 @@
{
return dma_addr == 0;
}
-
#endif /* __ASM_SH_DMA_MAPPING_H */
-
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
index e62a6d0..d9daa02 100644
--- a/include/asm-sh/dma.h
+++ b/include/asm-sh/dma.h
@@ -89,6 +89,7 @@
wait_queue_head_t wait_queue;
struct sys_device dev;
+ char *name;
};
struct dma_info {
diff --git a/include/asm-sh/dmida/io.h b/include/asm-sh/dmida/io.h
deleted file mode 100644
index 21bd416..0000000
--- a/include/asm-sh/dmida/io.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_SH_DMIDA_IO_H
-#define __ASM_SH_DMIDA_IO_H
-
-/*
- * Nothing special here.. just use the generic cchip io routines.
- */
-#include <asm/hd64465/io.h>
-
-#endif /* __ASM_SH_DMIDA_IO_H */
-
diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h
index 1b63dfe..3a07ab4 100644
--- a/include/asm-sh/elf.h
+++ b/include/asm-sh/elf.h
@@ -1,6 +1,11 @@
#ifndef __ASM_SH_ELF_H
#define __ASM_SH_ELF_H
+#include <asm/processor.h>
+#include <asm/auxvec.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
/* SH relocation types */
#define R_SH_NONE 0
#define R_SH_DIR32 1
@@ -46,9 +51,6 @@
* ELF register definitions..
*/
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
typedef unsigned long elf_greg_t;
#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
@@ -91,7 +93,7 @@
instruction set this CPU supports. This could be done in user space,
but it's not easy, and we've already done it here. */
-#define ELF_HWCAP (0)
+#define ELF_HWCAP (boot_cpu_data.flags)
/* This yields a string that ld.so will use to load implementation
specific libraries for optimization. This is more specific in
@@ -119,4 +121,24 @@
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
#endif
+#ifdef CONFIG_VSYSCALL
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int executable_stack);
+
+extern unsigned int vdso_enabled;
+extern void __kernel_vsyscall;
+
+#define VDSO_BASE ((unsigned long)current->mm->context.vdso)
+#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x))
+
+#define ARCH_DLINFO \
+do { \
+ if (vdso_enabled) \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
+} while (0)
+#endif /* CONFIG_VSYSCALL */
+
#endif /* __ASM_SH_ELF_H */
diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h
index 412bcca..458e9fa 100644
--- a/include/asm-sh/fixmap.h
+++ b/include/asm-sh/fixmap.h
@@ -25,7 +25,7 @@
* addresses. The point is to have a constant address at
* compile time, but to set the physical address only
* in the boot process. We allocate these special addresses
- * from the end of virtual memory (0xfffff000) backwards.
+ * from the end of P3 backwards.
* Also this lets us do fail-safe vmalloc(), we
* can guarantee that these special addresses and
* vmalloc()-ed addresses never overlap.
diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h
index f29072e..0d5cc04 100644
--- a/include/asm-sh/flat.h
+++ b/include/asm-sh/flat.h
@@ -13,7 +13,7 @@
#define __ASM_SH_FLAT_H
#define flat_stack_align(sp) /* nothing needed */
-#define flat_argvp_envp_on_stack() 1
+#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#define flat_get_addr_from_rp(rp, relval, flags) get_unaligned(rp)
diff --git a/include/asm-sh/harp/harp.h b/include/asm-sh/harp/harp.h
deleted file mode 100644
index b2fbcfa..0000000
--- a/include/asm-sh/harp/harp.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Defintions applicable to the STMicroelectronics ST40STB1 HARP and
- * compatible boards.
- */
-
-#if defined(CONFIG_SH_STB1_HARP)
-
-#define EPLD_BASE 0xa0800000
-
-#define EPLD_LED (EPLD_BASE+0x000c0000)
-#define EPLD_INTSTAT0 (EPLD_BASE+0x00200000)
-#define EPLD_INTSTAT1 (EPLD_BASE+0x00240000)
-#define EPLD_INTMASK0 (EPLD_BASE+0x00280000)
-#define EPLD_INTMASK1 (EPLD_BASE+0x002c0000)
-#define EPLD_PAGEADDR (EPLD_BASE+0x00300000)
-#define EPLD_REVID1 (EPLD_BASE+0x00380000)
-#define EPLD_REVID2 (EPLD_BASE+0x003c0000)
-
-#define EPLD_LED_ON 1
-#define EPLD_LED_OFF 0
-
-#elif defined(CONFIG_SH_STB1_OVERDRIVE)
-
-#define EPLD_BASE 0xa7000000
-
-#define EPLD_REVID (EPLD_BASE+0x00000000)
-#define EPLD_LED (EPLD_BASE+0x00040000)
-#define EPLD_INTMASK0 (EPLD_BASE+0x001c0000)
-#define EPLD_INTMASK1 (EPLD_BASE+0x00200000)
-#define EPLD_INTSTAT0 (EPLD_BASE+0x00240000)
-#define EPLD_INTSTAT1 (EPLD_BASE+0x00280000)
-
-#define EPLD_LED_ON 0
-#define EPLD_LED_OFF 1
-
-#else
-#error Unknown board
-#endif
diff --git a/include/asm-sh/harp/io.h b/include/asm-sh/harp/io.h
deleted file mode 100644
index 68f39e0..0000000
--- a/include/asm-sh/harp/io.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_SH_HARP_IO_H
-#define __ASM_SH_HARP_IO_H
-
-/*
- * Nothing special here.. just use the generic cchip io routines.
- */
-#include <asm/hd64465/io.h>
-
-#endif /* __ASM_SH_HARP_IO_H */
-
diff --git a/include/asm-sh/hd64461/hd64461.h b/include/asm-sh/hd64461.h
similarity index 84%
rename from include/asm-sh/hd64461/hd64461.h
rename to include/asm-sh/hd64461.h
index 87f13d2..27e5c34 100644
--- a/include/asm-sh/hd64461/hd64461.h
+++ b/include/asm-sh/hd64461.h
@@ -40,7 +40,12 @@
#define HD64461_LCDCBAR 0x11000
#define HD64461_LCDCLOR 0x11002
#define HD64461_LCDCCR 0x11004
-#define HD64461_LCDCCR_MOFF 0x80
+#define HD64461_LCDCCR_STBACK 0x0400
+#define HD64461_LCDCCR_STREQ 0x0100
+#define HD64461_LCDCCR_MOFF 0x0080
+#define HD64461_LCDCCR_REFSEL 0x0040
+#define HD64461_LCDCCR_EPON 0x0020
+#define HD64461_LCDCCR_SPON 0x0010
#define HD64461_LDR1 0x11010
#define HD64461_LDR1_DON 0x01
@@ -54,9 +59,9 @@
#define HD64461_LDVSPR 0x1101c
#define HD64461_LDR3 0x1101e
-#define HD64461_CPTWAR 0x11030
+#define HD64461_CPTWAR 0x11030
#define HD64461_CPTWDR 0x11032
-#define HD64461_CPTRAR 0x11034
+#define HD64461_CPTRAR 0x11034
#define HD64461_CPTRDR 0x11036
#define HD64461_GRDOR 0x11040
@@ -111,7 +116,7 @@
#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */
#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */
-#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */
+#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */
#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */
#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */
#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */
@@ -139,11 +144,11 @@
/* PCC Card Status Change Interrupt Enable Register */
#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */
-#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */
+#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */
#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */
-#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */
+#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */
#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */
-#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */
+#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */
#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */
#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */
@@ -155,7 +160,6 @@
#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */
#define HD64461_PCCSCR_SWP 0x01 /* write protect */
-
#define HD64461_P0OCR 0x1202a
#define HD64461_P1OCR 0x1202c
#define HD64461_PGCR 0x1202e
@@ -180,23 +184,25 @@
#define HD64461_NIRR 0x15000
#define HD64461_NIMR 0x15002
-#ifndef CONFIG_HD64461_IOBASE
-#define CONFIG_HD64461_IOBASE 0xb0000000
-#endif
-#ifndef CONFIG_HD64461_IRQ
-#define CONFIG_HD64461_IRQ 36
-#endif
-
#define HD64461_IRQBASE OFFCHIP_IRQ_BASE
-#define HD64461_IRQ_NUM 16
+#define HD64461_IRQ_NUM 16
-#define HD64461_IRQ_UART (HD64461_IRQBASE+5)
-#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6)
-#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9)
-#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10)
-#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11)
-#define HD64461_IRQ_AFE (HD64461_IRQBASE+12)
-#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13)
-#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14)
+#define HD64461_IRQ_UART (HD64461_IRQBASE+5)
+#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6)
+#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9)
+#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10)
+#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11)
+#define HD64461_IRQ_AFE (HD64461_IRQBASE+12)
+#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13)
+#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14)
+
+#define __IO_PREFIX hd64461
+#include <asm/io_generic.h>
+
+/* arch/sh/cchips/hd6446x/hd64461/setup.c */
+int hd64461_irq_demux(int irq);
+void hd64461_register_irq_demux(int irq,
+ int (*demux) (int irq, void *dev), void *dev);
+void hd64461_unregister_irq_demux(int irq);
#endif
diff --git a/include/asm-sh/hd64461/io.h b/include/asm-sh/hd64461/io.h
deleted file mode 100644
index 67f2489..0000000
--- a/include/asm-sh/hd64461/io.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-sh/io_hd64461.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an HD64461
- */
-
-#ifndef _ASM_SH_IO_HD64461_H
-#define _ASM_SH_IO_HD64461_H
-
-extern unsigned char hd64461_inb(unsigned long port);
-extern unsigned short hd64461_inw(unsigned long port);
-extern unsigned int hd64461_inl(unsigned long port);
-
-extern void hd64461_outb(unsigned char value, unsigned long port);
-extern void hd64461_outw(unsigned short value, unsigned long port);
-extern void hd64461_outl(unsigned int value, unsigned long port);
-
-extern unsigned char hd64461_inb_p(unsigned long port);
-extern void hd64461_outb_p(unsigned char value, unsigned long port);
-
-extern void hd64461_insb(unsigned long port, void *addr, unsigned long count);
-extern void hd64461_insw(unsigned long port, void *addr, unsigned long count);
-extern void hd64461_insl(unsigned long port, void *addr, unsigned long count);
-
-extern void hd64461_outsb(unsigned long port, const void *buffer, unsigned long count);
-extern void hd64461_outsw(unsigned long port, const void *buffer, unsigned long count);
-extern void hd64461_outsl(unsigned long port, const void *buffer, unsigned long count);
-
-extern unsigned short hd64461_readw(unsigned long addr);
-extern void hd64461_writew(unsigned short b, unsigned long addr);
-
-
-extern int hd64461_irq_demux(int irq);
-extern void hd64461_register_irq_demux(int irq,
- int (*demux)(int irq, void *dev), void *dev);
-extern void hd64461_unregister_irq_demux(int irq);
-
-#endif /* _ASM_SH_IO_HD64461_H */
diff --git a/include/asm-sh/hp6xx/hp6xx.h b/include/asm-sh/hp6xx/hp6xx.h
index a26247f..f35134c 100644
--- a/include/asm-sh/hp6xx/hp6xx.h
+++ b/include/asm-sh/hp6xx/hp6xx.h
@@ -2,16 +2,33 @@
#define __ASM_SH_HP6XX_H
/*
- * Copyright (C) 2003 Andriy Skulysh
+ * Copyright (C) 2003, 2004, 2005 Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
*/
-#define HP680_TS_IRQ IRQ3_IRQ
+#define HP680_BTN_IRQ IRQ0_IRQ
+#define HP680_TS_IRQ IRQ3_IRQ
+#define HP680_HD64461_IRQ IRQ4_IRQ
#define DAC_LCD_BRIGHTNESS 0
#define DAC_SPEAKER_VOLUME 1
+#define PGDR_OPENED 0x01
+#define PGDR_MAIN_BATTERY_OUT 0x04
+#define PGDR_PLAY_BUTTON 0x08
+#define PGDR_REWIND_BUTTON 0x10
+#define PGDR_RECORD_BUTTON 0x20
+
#define PHDR_TS_PEN_DOWN 0x08
+#define PJDR_LED_BLINK 0x02
+
+#define PKDR_LED_GREEN 0x10
+
#define SCPDR_TS_SCAN_ENABLE 0x20
#define SCPDR_TS_SCAN_Y 0x02
#define SCPDR_TS_SCAN_X 0x01
@@ -21,11 +38,43 @@
#define ADC_CHANNEL_TS_Y 1
#define ADC_CHANNEL_TS_X 2
+#define ADC_CHANNEL_BATTERY 3
+#define ADC_CHANNEL_BACKUP 4
+#define ADC_CHANNEL_CHARGE 5
#define HD64461_GPADR_SPEAKER 0x01
#define HD64461_GPADR_PCMCIA0 (0x02|0x08)
+
#define HD64461_GPBDR_LCDOFF 0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78
#define HD64461_GPBDR_LED_RED 0x80
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR 0xa4000130
+#define PKDR 0xa4000132
+
+static inline void hp6xx_led_red(int on)
+{
+ u16 v16;
+ v16 = ctrl_inw(CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+ if (on)
+ ctrl_outw(v16 & (~HD64461_GPBDR_LED_RED), CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+ else
+ ctrl_outw(v16 | HD64461_GPBDR_LED_RED, CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
+}
+
+static inline void hp6xx_led_green(int on)
+{
+ u8 v8;
+
+ v8 = ctrl_inb(PKDR);
+ if (on)
+ ctrl_outb(v8 & (~PKDR_LED_GREEN), PKDR);
+ else
+ ctrl_outb(v8 | PKDR_LED_GREEN, PKDR);
+}
+
#endif /* __ASM_SH_HP6XX_H */
diff --git a/include/asm-sh/hp6xx/io.h b/include/asm-sh/hp6xx/io.h
index 7317980..2044476 100644
--- a/include/asm-sh/hp6xx/io.h
+++ b/include/asm-sh/hp6xx/io.h
@@ -4,7 +4,7 @@
/*
* Nothing special here.. just use the generic cchip io routines.
*/
-#include <asm/hd64461/io.h>
+#include <asm/hd64461.h>
#endif /* __ASM_SH_HP6XX_IO_H */
diff --git a/include/asm-sh/hs7751rvoip/hs7751rvoip.h b/include/asm-sh/hs7751rvoip/hs7751rvoip.h
index 5f995f9..c4cff9d 100644
--- a/include/asm-sh/hs7751rvoip/hs7751rvoip.h
+++ b/include/asm-sh/hs7751rvoip/hs7751rvoip.h
@@ -19,8 +19,6 @@
#define PA_OUTPORTR 0xa400000e /* Output Port Reguster */
#define PA_VERREG 0xa4000014 /* FPGA Version Register */
-#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
-#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
@@ -44,4 +42,13 @@
#define IRQ_RINGING 4 /* Ringing IRQ */
#define IRQ_CODEC 5 /* CODEC IRQ */
+#define __IO_PREFIX hs7751rvoip
+#include <asm/io_generic.h>
+
+/* arch/sh/boards/renesas/hs7751rvoip/irq.c */
+void init_hs7751rvoip_IRQ(void);
+
+/* arch/sh/boards/renesas/hs7751rvoip/io.c */
+void *hs7751rvoip_ioremap(unsigned long, unsigned long);
+
#endif /* __ASM_SH_RENESAS_HS7751RVOIP */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index 894e64b..ed12d38 100644
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -107,6 +107,9 @@
#define __raw_writew(v, a) __writew(v, (void __iomem *)(a))
#define __raw_writel(v, a) __writel(v, (void __iomem *)(a))
+void __raw_writesl(unsigned long addr, const void *data, int longlen);
+void __raw_readsl(unsigned long addr, void *data, int longlen);
+
/*
* The platform header files may define some of these macros to use
* the inlined versions where appropriate. These macros may also be
@@ -132,6 +135,9 @@
# define writel(v,a) ({ __raw_writel((v),(a)); mb(); })
#endif
+#define writesl __raw_writesl
+#define readsl __raw_readsl
+
#define readb_relaxed(a) readb(a)
#define readw_relaxed(a) readw(a)
#define readl_relaxed(a) readl(a)
@@ -209,8 +215,14 @@
*(volatile unsigned long*)addr = b;
}
+static inline void ctrl_delay(void)
+{
+ ctrl_inw(P2SEG);
+}
+
#define IO_SPACE_LIMIT 0xffffffff
+#ifdef CONFIG_MMU
/*
* Change virtual addresses to physical addresses and vv.
* These are trivial on the 1:1 Linux/SuperH mapping
@@ -224,6 +236,10 @@
{
return (void *)P1SEGADDR(address);
}
+#else
+#define phys_to_virt(address) ((void *)(address))
+#define virt_to_phys(address) ((unsigned long)(address))
+#endif
#define virt_to_bus virt_to_phys
#define bus_to_virt phys_to_virt
diff --git a/include/asm-sh/irq-sh73180.h b/include/asm-sh/irq-sh73180.h
index d705252..b28af9a 100644
--- a/include/asm-sh/irq-sh73180.h
+++ b/include/asm-sh/irq-sh73180.h
@@ -311,6 +311,4 @@
#define IRQ6_PRIORITY 1
#define IRQ7_PRIORITY 1
-int shmse_irq_demux(int irq);
-
#endif /* __ASM_SH_IRQ_SH73180_H */
diff --git a/include/asm-sh/irq-sh7343.h b/include/asm-sh/irq-sh7343.h
new file mode 100644
index 0000000..5d15419
--- /dev/null
+++ b/include/asm-sh/irq-sh7343.h
@@ -0,0 +1,317 @@
+#ifndef __ASM_SH_IRQ_SH7343_H
+#define __ASM_SH_IRQ_SH7343_H
+
+/*
+ * linux/include/asm-sh/irq-sh7343.h
+ *
+ * Copyright (C) 2006 Kenati Technologies Inc.
+ * Andre Mccurdy <andre@kenati.com>
+ * Ranjit Deshpande <ranjit@kenati.com>
+ */
+
+#undef INTC_IPRA
+#undef INTC_IPRB
+#undef INTC_IPRC
+#undef INTC_IPRD
+
+#undef DMTE0_IRQ
+#undef DMTE1_IRQ
+#undef DMTE2_IRQ
+#undef DMTE3_IRQ
+#undef DMTE4_IRQ
+#undef DMTE5_IRQ
+#undef DMTE6_IRQ
+#undef DMTE7_IRQ
+#undef DMAE_IRQ
+#undef DMA_IPR_ADDR
+#undef DMA_IPR_POS
+#undef DMA_PRIORITY
+
+#undef INTC_IMCR0
+#undef INTC_IMCR1
+#undef INTC_IMCR2
+#undef INTC_IMCR3
+#undef INTC_IMCR4
+#undef INTC_IMCR5
+#undef INTC_IMCR6
+#undef INTC_IMCR7
+#undef INTC_IMCR8
+#undef INTC_IMCR9
+#undef INTC_IMCR10
+
+
+#define INTC_IPRA 0xA4080000UL
+#define INTC_IPRB 0xA4080004UL
+#define INTC_IPRC 0xA4080008UL
+#define INTC_IPRD 0xA408000CUL
+#define INTC_IPRE 0xA4080010UL
+#define INTC_IPRF 0xA4080014UL
+#define INTC_IPRG 0xA4080018UL
+#define INTC_IPRH 0xA408001CUL
+#define INTC_IPRI 0xA4080020UL
+#define INTC_IPRJ 0xA4080024UL
+#define INTC_IPRK 0xA4080028UL
+#define INTC_IPRL 0xA408002CUL
+
+#define INTC_IMR0 0xA4080080UL
+#define INTC_IMR1 0xA4080084UL
+#define INTC_IMR2 0xA4080088UL
+#define INTC_IMR3 0xA408008CUL
+#define INTC_IMR4 0xA4080090UL
+#define INTC_IMR5 0xA4080094UL
+#define INTC_IMR6 0xA4080098UL
+#define INTC_IMR7 0xA408009CUL
+#define INTC_IMR8 0xA40800A0UL
+#define INTC_IMR9 0xA40800A4UL
+#define INTC_IMR10 0xA40800A8UL
+#define INTC_IMR11 0xA40800ACUL
+
+#define INTC_IMCR0 0xA40800C0UL
+#define INTC_IMCR1 0xA40800C4UL
+#define INTC_IMCR2 0xA40800C8UL
+#define INTC_IMCR3 0xA40800CCUL
+#define INTC_IMCR4 0xA40800D0UL
+#define INTC_IMCR5 0xA40800D4UL
+#define INTC_IMCR6 0xA40800D8UL
+#define INTC_IMCR7 0xA40800DCUL
+#define INTC_IMCR8 0xA40800E0UL
+#define INTC_IMCR9 0xA40800E4UL
+#define INTC_IMCR10 0xA40800E8UL
+#define INTC_IMCR11 0xA40800ECUL
+
+#define INTC_ICR0 0xA4140000UL
+#define INTC_ICR1 0xA414001CUL
+
+#define INTMSK0 0xa4140044
+#define INTMSKCLR0 0xa4140064
+#define INTC_INTPRI0 0xa4140010
+
+/*
+ NOTE:
+
+ *_IRQ = (INTEVT2 - 0x200)/0x20
+*/
+
+/* TMU0 */
+#define TMU0_IRQ 16
+#define TMU0_IPR_ADDR INTC_IPRA
+#define TMU0_IPR_POS 3
+#define TMU0_PRIORITY 2
+
+#define TIMER_IRQ 16
+#define TIMER_IPR_ADDR INTC_IPRA
+#define TIMER_IPR_POS 3
+#define TIMER_PRIORITY 2
+
+/* TMU1 */
+#define TMU1_IRQ 17
+#define TMU1_IPR_ADDR INTC_IPRA
+#define TMU1_IPR_POS 2
+#define TMU1_PRIORITY 2
+
+/* TMU2 */
+#define TMU2_IRQ 18
+#define TMU2_IPR_ADDR INTC_IPRA
+#define TMU2_IPR_POS 1
+#define TMU2_PRIORITY 2
+
+/* LCDC */
+#define LCDC_IRQ 28
+#define LCDC_IPR_ADDR INTC_IPRB
+#define LCDC_IPR_POS 2
+#define LCDC_PRIORITY 2
+
+/* VIO (Video I/O) */
+#define CEU_IRQ 52
+#define BEU_IRQ 53
+#define VEU_IRQ 54
+#define VOU_IRQ 55
+#define VIO_IPR_ADDR INTC_IPRE
+#define VIO_IPR_POS 2
+#define VIO_PRIORITY 2
+
+/* MFI (Multi Functional Interface) */
+#define MFI_IRQ 56
+#define MFI_IPR_ADDR INTC_IPRE
+#define MFI_IPR_POS 1
+#define MFI_PRIORITY 2
+
+/* VPU (Video Processing Unit) */
+#define VPU_IRQ 60
+#define VPU_IPR_ADDR INTC_IPRE
+#define VPU_IPR_POS 0
+#define VPU_PRIORITY 2
+
+/* 3DG */
+#define TDG_IRQ 63
+#define TDG_IPR_ADDR INTC_IPRJ
+#define TDG_IPR_POS 2
+#define TDG_PRIORITY 2
+
+/* DMAC(1) */
+#define DMTE0_IRQ 48
+#define DMTE1_IRQ 49
+#define DMTE2_IRQ 50
+#define DMTE3_IRQ 51
+#define DMA1_IPR_ADDR INTC_IPRE
+#define DMA1_IPR_POS 3
+#define DMA1_PRIORITY 7
+
+/* DMAC(2) */
+#define DMTE4_IRQ 76
+#define DMTE5_IRQ 77
+#define DMA2_IPR_ADDR INTC_IPRF
+#define DMA2_IPR_POS 2
+#define DMA2_PRIORITY 7
+
+/* SCIF0 */
+#define SCIF_ERI_IRQ 80
+#define SCIF_RXI_IRQ 81
+#define SCIF_BRI_IRQ 82
+#define SCIF_TXI_IRQ 83
+#define SCIF_IPR_ADDR INTC_IPRG
+#define SCIF_IPR_POS 3
+#define SCIF_PRIORITY 3
+
+/* SIOF0 */
+#define SIOF0_IRQ 84
+#define SIOF0_IPR_ADDR INTC_IPRH
+#define SIOF0_IPR_POS 3
+#define SIOF0_PRIORITY 3
+
+/* FLCTL (Flash Memory Controller) */
+#define FLSTE_IRQ 92
+#define FLTEND_IRQ 93
+#define FLTRQ0_IRQ 94
+#define FLTRQ1_IRQ 95
+#define FLCTL_IPR_ADDR INTC_IPRH
+#define FLCTL_IPR_POS 1
+#define FLCTL_PRIORITY 3
+
+/* IIC(0) (IIC Bus Interface) */
+#define IIC0_ALI_IRQ 96
+#define IIC0_TACKI_IRQ 97
+#define IIC0_WAITI_IRQ 98
+#define IIC0_DTEI_IRQ 99
+#define IIC0_IPR_ADDR INTC_IPRH
+#define IIC0_IPR_POS 0
+#define IIC0_PRIORITY 3
+
+/* IIC(1) (IIC Bus Interface) */
+#define IIC1_ALI_IRQ 44
+#define IIC1_TACKI_IRQ 45
+#define IIC1_WAITI_IRQ 46
+#define IIC1_DTEI_IRQ 47
+#define IIC1_IPR_ADDR INTC_IPRI
+#define IIC1_IPR_POS 0
+#define IIC1_PRIORITY 3
+
+/* SIO0 */
+#define SIO0_IRQ 88
+#define SIO0_IPR_ADDR INTC_IPRI
+#define SIO0_IPR_POS 3
+#define SIO0_PRIORITY 3
+
+/* SDHI */
+#define SDHI_SDHII0_IRQ 100
+#define SDHI_SDHII1_IRQ 101
+#define SDHI_SDHII2_IRQ 102
+#define SDHI_SDHII3_IRQ 103
+#define SDHI_IPR_ADDR INTC_IPRK
+#define SDHI_IPR_POS 0
+#define SDHI_PRIORITY 3
+
+/* SIU (Sound Interface Unit) */
+#define SIU_IRQ 108
+#define SIU_IPR_ADDR INTC_IPRJ
+#define SIU_IPR_POS 1
+#define SIU_PRIORITY 3
+
+#define PORT_PACR 0xA4050100UL
+#define PORT_PBCR 0xA4050102UL
+#define PORT_PCCR 0xA4050104UL
+#define PORT_PDCR 0xA4050106UL
+#define PORT_PECR 0xA4050108UL
+#define PORT_PFCR 0xA405010AUL
+#define PORT_PGCR 0xA405010CUL
+#define PORT_PHCR 0xA405010EUL
+#define PORT_PJCR 0xA4050110UL
+#define PORT_PKCR 0xA4050112UL
+#define PORT_PLCR 0xA4050114UL
+#define PORT_SCPCR 0xA4050116UL
+#define PORT_PMCR 0xA4050118UL
+#define PORT_PNCR 0xA405011AUL
+#define PORT_PQCR 0xA405011CUL
+#define PORT_PRCR 0xA405011EUL
+#define PORT_PTCR 0xA405014CUL
+#define PORT_PUCR 0xA405014EUL
+#define PORT_PVCR 0xA4050150UL
+
+#define PORT_PSELA 0xA4050140UL
+#define PORT_PSELB 0xA4050142UL
+#define PORT_PSELC 0xA4050144UL
+#define PORT_PSELE 0xA4050158UL
+
+#define PORT_HIZCRA 0xA4050146UL
+#define PORT_HIZCRB 0xA4050148UL
+#define PORT_DRVCR 0xA405014AUL
+
+#define PORT_PADR 0xA4050120UL
+#define PORT_PBDR 0xA4050122UL
+#define PORT_PCDR 0xA4050124UL
+#define PORT_PDDR 0xA4050126UL
+#define PORT_PEDR 0xA4050128UL
+#define PORT_PFDR 0xA405012AUL
+#define PORT_PGDR 0xA405012CUL
+#define PORT_PHDR 0xA405012EUL
+#define PORT_PJDR 0xA4050130UL
+#define PORT_PKDR 0xA4050132UL
+#define PORT_PLDR 0xA4050134UL
+#define PORT_SCPDR 0xA4050136UL
+#define PORT_PMDR 0xA4050138UL
+#define PORT_PNDR 0xA405013AUL
+#define PORT_PQDR 0xA405013CUL
+#define PORT_PRDR 0xA405013EUL
+#define PORT_PTDR 0xA405016CUL
+#define PORT_PUDR 0xA405016EUL
+#define PORT_PVDR 0xA4050170UL
+
+#define IRQ0_IRQ 32
+#define IRQ1_IRQ 33
+#define IRQ2_IRQ 34
+#define IRQ3_IRQ 35
+#define IRQ4_IRQ 36
+#define IRQ5_IRQ 37
+#define IRQ6_IRQ 38
+#define IRQ7_IRQ 39
+
+#define INTPRI00 0xA4140010UL
+
+#define IRQ0_IPR_ADDR INTPRI00
+#define IRQ1_IPR_ADDR INTPRI00
+#define IRQ2_IPR_ADDR INTPRI00
+#define IRQ3_IPR_ADDR INTPRI00
+#define IRQ4_IPR_ADDR INTPRI00
+#define IRQ5_IPR_ADDR INTPRI00
+#define IRQ6_IPR_ADDR INTPRI00
+#define IRQ7_IPR_ADDR INTPRI00
+
+#define IRQ0_IPR_POS 7
+#define IRQ1_IPR_POS 6
+#define IRQ2_IPR_POS 5
+#define IRQ3_IPR_POS 4
+#define IRQ4_IPR_POS 3
+#define IRQ5_IPR_POS 2
+#define IRQ6_IPR_POS 1
+#define IRQ7_IPR_POS 0
+
+#define IRQ0_PRIORITY 1
+#define IRQ1_PRIORITY 1
+#define IRQ2_PRIORITY 1
+#define IRQ3_PRIORITY 1
+#define IRQ4_PRIORITY 1
+#define IRQ5_PRIORITY 1
+#define IRQ6_PRIORITY 1
+#define IRQ7_PRIORITY 1
+
+#endif /* __ASM_SH_IRQ_SH7343_H */
diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h
index 7f90315..895c578 100644
--- a/include/asm-sh/irq-sh7780.h
+++ b/include/asm-sh/irq-sh7780.h
@@ -145,11 +145,6 @@
#define TMU_CH5_IPR_POS 1
#define TMU_CH5_PRIORITY 2
-#define RTC_IRQ 22
-#define RTC_IPR_ADDR INTC_INT2PRI1
-#define RTC_IPR_POS 0
-#define RTC_PRIORITY TIMER_PRIORITY
-
/* SCIF0 */
#define SCIF0_ERI_IRQ 40
#define SCIF0_RXI_IRQ 41
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 611e67c..0e5f365 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -192,7 +192,7 @@
#if defined (CONFIG_CPU_SUBTYPE_SH7707) || defined (CONFIG_CPU_SUBTYPE_SH7708) || \
defined (CONFIG_CPU_SUBTYPE_SH7709) || defined (CONFIG_CPU_SUBTYPE_SH7750) || \
- defined (CONFIG_CPU_SUBTYPE_SH7751)
+ defined (CONFIG_CPU_SUBTYPE_SH7751) || defined (CONFIG_CPU_SUBTYPE_SH7706)
#define SCI_ERI_IRQ 23
#define SCI_RXI_IRQ 24
#define SCI_TXI_IRQ 25
@@ -207,6 +207,7 @@
#define SCIF0_IPR_POS 3
#define SCIF0_PRIORITY 3
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
#define SCIF_ERI_IRQ 56
@@ -261,9 +262,12 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
# define ONCHIP_NR_IRQS 32
#elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7705)
# define ONCHIP_NR_IRQS 64 // Actually 61
# define PINT_NR_IRQS 16
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define ONCHIP_NR_IRQS 104
#elif defined(CONFIG_CPU_SUBTYPE_SH7750)
# define ONCHIP_NR_IRQS 48 // Actually 44
#elif defined(CONFIG_CPU_SUBTYPE_SH7751)
@@ -275,7 +279,8 @@
#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
# define ONCHIP_NR_IRQS 144
#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
- defined(CONFIG_CPU_SUBTYPE_SH73180)
+ defined(CONFIG_CPU_SUBTYPE_SH73180) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7343)
# define ONCHIP_NR_IRQS 109
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
# define ONCHIP_NR_IRQS 111
@@ -311,6 +316,8 @@
# define OFFCHIP_NR_IRQS 4
#elif defined(CONFIG_SH_R7780RP)
# define OFFCHIP_NR_IRQS 16
+#elif defined(CONFIG_SH_7343_SOLUTION_ENGINE)
+# define OFFCHIP_NR_IRQS 12
#elif defined(CONFIG_SH_UNKNOWN)
# define OFFCHIP_NR_IRQS 16 /* Must also be last */
#else
@@ -335,6 +342,11 @@
extern unsigned short *irq_mask_register;
/*
+ * PINT IRQs
+ */
+void init_IRQ_pint(void);
+
+/*
* Function for "on chip support modules".
*/
extern void make_ipr_irq(unsigned int irq, unsigned int addr,
@@ -471,8 +483,10 @@
#define INTC_ICR 0xfffffee0UL
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
+ defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710)
#define INTC_IRR0 0xa4000004UL
#define INTC_IRR1 0xa4000006UL
#define INTC_IRR2 0xa4000008UL
@@ -491,8 +505,105 @@
#define INTC_IPRF 0xa4080000UL
#define INTC_IPRG 0xa4080002UL
#define INTC_IPRH 0xa4080004UL
-#endif
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+/* Interrupt Controller Registers */
+#undef INTC_IPRA
+#undef INTC_IPRB
+#define INTC_IPRA 0xA414FEE2UL
+#define INTC_IPRB 0xA414FEE4UL
+#define INTC_IPRF 0xA4080000UL
+#define INTC_IPRG 0xA4080002UL
+#define INTC_IPRH 0xA4080004UL
+#define INTC_IPRI 0xA4080006UL
+#undef INTC_ICR0
+#undef INTC_ICR1
+#define INTC_ICR0 0xA414FEE0UL
+#define INTC_ICR1 0xA4140010UL
+
+#define INTC_IRR0 0xa4000004UL
+#define INTC_IRR1 0xa4000006UL
+#define INTC_IRR2 0xa4000008UL
+#define INTC_IRR3 0xa400000AUL
+#define INTC_IRR4 0xa400000CUL
+#define INTC_IRR5 0xa4080020UL
+#define INTC_IRR7 0xa4080024UL
+#define INTC_IRR8 0xa4080026UL
+
+/* Interrupt numbers */
+#define TIMER2_IRQ 18
+#define TIMER2_IPR_ADDR INTC_IPRA
+#define TIMER2_IPR_POS 1
+#define TIMER2_PRIORITY 2
+
+/* WDT */
+#define WDT_IRQ 27
+#define WDT_IPR_ADDR INTC_IPRB
+#define WDT_IPR_POS 3
+#define WDT_PRIORITY 2
+
+#define SCIF0_ERI_IRQ 52
+#define SCIF0_RXI_IRQ 53
+#define SCIF0_BRI_IRQ 54
+#define SCIF0_TXI_IRQ 55
+#define SCIF0_IPR_ADDR INTC_IPRE
+#define SCIF0_IPR_POS 2
+#define SCIF0_PRIORITY 3
+
+#define DMTE4_IRQ 76
+#define DMTE5_IRQ 77
+#define DMA2_IPR_ADDR INTC_IPRF
+#define DMA2_IPR_POS 2
+#define DMA2_PRIORITY 7
+
+#define IPSEC_IRQ 79
+#define IPSEC_IPR_ADDR INTC_IPRF
+#define IPSEC_IPR_POS 3
+#define IPSEC_PRIORITY 3
+
+/* EDMAC */
+#define EDMAC0_IRQ 80
+#define EDMAC0_IPR_ADDR INTC_IPRG
+#define EDMAC0_IPR_POS 3
+#define EDMAC0_PRIORITY 3
+
+#define EDMAC1_IRQ 81
+#define EDMAC1_IPR_ADDR INTC_IPRG
+#define EDMAC1_IPR_POS 2
+#define EDMAC1_PRIORITY 3
+
+#define EDMAC2_IRQ 82
+#define EDMAC2_IPR_ADDR INTC_IPRG
+#define EDMAC2_IPR_POS 1
+#define EDMAC2_PRIORITY 3
+
+/* SIOF */
+#define SIOF0_ERI_IRQ 96
+#define SIOF0_TXI_IRQ 97
+#define SIOF0_RXI_IRQ 98
+#define SIOF0_CCI_IRQ 99
+#define SIOF0_IPR_ADDR INTC_IPRH
+#define SIOF0_IPR_POS 0
+#define SIOF0_PRIORITY 7
+
+#define SIOF1_ERI_IRQ 100
+#define SIOF1_TXI_IRQ 101
+#define SIOF1_RXI_IRQ 102
+#define SIOF1_CCI_IRQ 103
+#define SIOF1_IPR_ADDR INTC_IPRI
+#define SIOF1_IPR_POS 1
+#define SIOF1_PRIORITY 7
+#endif /* CONFIG_CPU_SUBTYPE_SH7710 */
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+#define PORT_PACR 0xa4050100UL
+#define PORT_PBCR 0xa4050102UL
+#define PORT_PCCR 0xa4050104UL
+#define PORT_PETCR 0xa4050106UL
+#define PORT_PADR 0xa4050120UL
+#define PORT_PBDR 0xa4050122UL
+#define PORT_PCDR 0xa4050124UL
+#else
#define PORT_PACR 0xa4000100UL
#define PORT_PBCR 0xa4000102UL
#define PORT_PCCR 0xa4000104UL
@@ -501,6 +612,7 @@
#define PORT_PBDR 0xa4000122UL
#define PORT_PCDR 0xa4000124UL
#define PORT_PFDR 0xa400012aUL
+#endif
#define IRQ0_IRQ 32
#define IRQ1_IRQ 33
@@ -577,7 +689,7 @@
#define NR_INTC2_IRQS 64
#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
#define INTC2_BASE 0xffd40000
-#define INTC2_FIRST_IRQ 22
+#define INTC2_FIRST_IRQ 21
#define INTC2_INTMSK_OFFSET (0x38)
#define INTC2_INTMSKCLR_OFFSET (0x3c)
#define NR_INTC2_IRQS 60
@@ -594,6 +706,8 @@
#endif
+extern int shmse_irq_demux(int irq);
+
static inline int generic_irq_demux(int irq)
{
return irq;
@@ -605,8 +719,21 @@
#define irq_canonicalize(irq) (irq)
#define irq_demux(irq) __irq_demux(sh_mv.mv_irq_demux(irq))
+#ifdef CONFIG_4KSTACKS
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+#endif
+
#if defined(CONFIG_CPU_SUBTYPE_SH73180)
#include <asm/irq-sh73180.h>
#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7343)
+#include <asm/irq-sh7343.h>
+#endif
+
#endif /* __ASM_SH_IRQ_H */
diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h
index 9dfe59f6..9d235af 100644
--- a/include/asm-sh/kexec.h
+++ b/include/asm-sh/kexec.h
@@ -23,11 +23,10 @@
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_SH
-#ifndef __ASSEMBLY__
+#define MAX_NOTE_BYTES 1024
-extern void machine_shutdown(void);
-extern void *crash_notes;
-
-#endif /* __ASSEMBLY__ */
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+ struct pt_regs *oldregs) { }
#endif /* _SH_KEXEC_H */
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
index 1653ffb..7b26f53 100644
--- a/include/asm-sh/kgdb.h
+++ b/include/asm-sh/kgdb.h
@@ -128,4 +128,19 @@
#define KGDB_ASSERT(condition, message)
#endif
+/* Taken from sh-stub.c of GDB 4.18 */
+static const char hexchars[] = "0123456789abcdef";
+
+/* Get high hex bits */
+static inline char highhex(const int x)
+{
+ return hexchars[(x >> 4) & 0xf];
+}
+
+/* Get low hex bits */
+static inline char lowhex(const int x)
+{
+ return hexchars[x & 0xf];
+}
+
#endif
diff --git a/include/asm-sh/landisk/gio.h b/include/asm-sh/landisk/gio.h
new file mode 100644
index 0000000..3fce4c4
--- /dev/null
+++ b/include/asm-sh/landisk/gio.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_SH_LANDISK_GIO_H
+#define __ASM_SH_LANDISK_GIO_H
+
+#include <linux/ioctl.h>
+
+/* version */
+#define VERSION_STR "1.00"
+
+/* Driver name */
+#define GIO_DRIVER_NAME "/dev/giodrv"
+
+/* Use 'k' as magic number */
+#define GIODRV_IOC_MAGIC 'k'
+
+#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0)
+/*
+ * S means "Set" through a ptr,
+ * T means "Tell" directly
+ * G means "Get" (to a pointed var)
+ * Q means "Query", response is on the return value
+ * X means "eXchange": G and S atomically
+ * H means "sHift": T and Q atomically
+ */
+#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *)
+#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *)
+#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *)
+#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *)
+#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *)
+#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *)
+#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *)
+#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
+
+#define GIODRV_IOCSGIO_LED _IOW(GIODRV_IOC_MAGIC, 9, unsigned long *)
+#define GIODRV_IOCGGIO_LED _IOR(GIODRV_IOC_MAGIC, 10, unsigned long *)
+#define GIODRV_IOCSGIO_BUZZER _IOW(GIODRV_IOC_MAGIC, 11, unsigned long *)
+#define GIODRV_IOCGGIO_LANDISK _IOR(GIODRV_IOC_MAGIC, 14, unsigned long *)
+#define GIODRV_IOCGGIO_BTN _IOR(GIODRV_IOC_MAGIC, 22, unsigned long *)
+#define GIODRV_IOCSGIO_BTNPID _IOW(GIODRV_IOC_MAGIC, 23, unsigned long *)
+#define GIODRV_IOCGGIO_BTNPID _IOR(GIODRV_IOC_MAGIC, 24, unsigned long *)
+
+#define GIODRV_IOC_MAXNR 8
+#define GIO_READ 0x00000000
+#define GIO_WRITE 0x00000001
+
+#endif /* __ASM_SH_LANDISK_GIO_H */
diff --git a/include/asm-sh/landisk/ide.h b/include/asm-sh/landisk/ide.h
new file mode 100644
index 0000000..6490e28
--- /dev/null
+++ b/include/asm-sh/landisk/ide.h
@@ -0,0 +1,14 @@
+/*
+ * modifed by kogiidena
+ * 2005.03.03
+ */
+
+#ifndef __ASM_SH_LANDISK_IDE_H
+#define __ASM_SH_LANDISK_IDE_H
+
+/* Nothing to see here.. */
+#include <asm/landisk/iodata_landisk.h>
+#define IRQ_CFCARD IRQ_FATA /* CF Card IRQ */
+#define IRQ_PCMCIA IRQ_ATA /* PCMCIA IRQ */
+
+#endif /* __ASM_SH_LANDISK_IDE_H */
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h
new file mode 100644
index 0000000..c74d3c7
--- /dev/null
+++ b/include/asm-sh/landisk/iodata_landisk.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_IODATA_LANDISK_H
+#define __ASM_SH_IODATA_LANDISK_H
+
+/*
+ * linux/include/asm-sh/landisk/iodata_landisk.h
+ *
+ * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
+ *
+ * IO-DATA LANDISK support
+ */
+
+/* Box specific addresses. */
+
+#define PA_USB 0xa4000000 /* USB Controller M66590 */
+
+#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */
+#define PA_LED 0xb0000001 /* LED Control Register */
+#define PA_STATUS 0xb0000002 /* Switch Status Register */
+#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */
+#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */
+#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */
+/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */
+#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */
+
+#define PA_LCD_CLRDSP 0x00 /* LCD Clear Display Offset */
+#define PA_LCD_RTNHOME 0x00 /* LCD Return Home Offset */
+#define PA_LCD_ENTMODE 0x00 /* LCD Entry Mode Offset */
+#define PA_LCD_DSPCTL 0x00 /* LCD Display ON/OFF Control Offset */
+#define PA_LCD_FUNC 0x00 /* LCD Function Set Offset */
+#define PA_LCD_CGRAM 0x00 /* LCD Set CGRAM Address Offset */
+#define PA_LCD_DDRAM 0x00 /* LCD Set DDRAM Address Offset */
+#define PA_LCD_RDFLAG 0x01 /* LCD Read Busy Flag Offset */
+#define PA_LCD_WTDATA 0x02 /* LCD Write Datat to RAM Offset */
+#define PA_LCD_RDDATA 0x03 /* LCD Read Data from RAM Offset */
+#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */
+#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */
+
+#define IRQ_PCIINTA 5 /* PCI INTA IRQ */
+#define IRQ_PCIINTB 6 /* PCI INTB IRQ */
+#define IRQ_PCIINDC 7 /* PCI INTC IRQ */
+#define IRQ_PCIINTD 8 /* PCI INTD IRQ */
+#define IRQ_ATA 9 /* ATA IRQ */
+#define IRQ_FATA 10 /* FATA IRQ */
+#define IRQ_POWER 11 /* Power Switch IRQ */
+#define IRQ_BUTTON 12 /* USL-5P Button IRQ */
+#define IRQ_FAULT 13 /* USL-5P Fault IRQ */
+
+#define SHUTDOWN_BTN_MAJOR 99 /* Shutdown button device major no. */
+
+#define SHUTDOWN_LOOP_CNT 5 /* Shutdown button Detection loop */
+#define SHUTDOWN_DELAY 200 /* Shutdown button delay value(ms) */
+
+
+/* added by kogiidena */
+/*
+ * landisk_ledparam
+ *
+ * led ------10 -6543210 -6543210 -6543210
+ * |000000..|0.......|0.......|U.......|
+ * | HARD |fastblik| blink | on |
+ *
+ * led0: power U:update flag
+ * led1: error
+ * led2: usb1
+ * led3: usb2
+ * led4: usb3
+ * led5: usb4
+ * led6: usb5
+ *
+ */
+extern int landisk_ledparam; /* from setup.c */
+extern int landisk_buzzerparam; /* from setup.c */
+extern int landisk_arch; /* from setup.c */
+
+#define __IO_PREFIX landisk
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_IODATA_LANDISK_H */
+
diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h
index 550501f..70389b7 100644
--- a/include/asm-sh/machvec.h
+++ b/include/asm-sh/machvec.h
@@ -8,17 +8,18 @@
*/
#ifndef _ASM_SH_MACHVEC_H
-#define _ASM_SH_MACHVEC_H 1
+#define _ASM_SH_MACHVEC_H
#include <linux/types.h>
#include <linux/time.h>
-
#include <asm/machtypes.h>
#include <asm/machvec_init.h>
struct device;
struct sh_machine_vector {
+ void (*mv_setup)(char **cmdline_p);
+ const char *mv_name;
int mv_nr_irqs;
u8 (*mv_inb)(unsigned long);
@@ -65,4 +66,6 @@
extern struct sh_machine_vector sh_mv;
+#define get_system_type() sh_mv.mv_name
+
#endif /* _ASM_SH_MACHVEC_H */
diff --git a/include/asm-sh/mc146818rtc.h b/include/asm-sh/mc146818rtc.h
index 1707cfb..0aee96a 100644
--- a/include/asm-sh/mc146818rtc.h
+++ b/include/asm-sh/mc146818rtc.h
@@ -4,173 +4,4 @@
#ifndef _ASM_MC146818RTC_H
#define _ASM_MC146818RTC_H
-#ifdef CONFIG_SH_MPC1211
-#undef _ASM_MC146818RTC_H
-#undef RTC_IRQ
-#include <asm/mpc1211/mc146818rtc.h>
-#else
-
-#include <asm/rtc.h>
-
-#define RTC_ALWAYS_BCD 1
-
-/* FIXME:RTC Interrupt feature is not implemented yet. */
-#undef RTC_IRQ
-#define RTC_IRQ 0
-
-#if defined(CONFIG_CPU_SH3)
-#define RTC_PORT(n) (R64CNT+(n)*2)
-#define CMOS_READ(addr) __CMOS_READ(addr,b)
-#define CMOS_WRITE(val,addr) __CMOS_WRITE(val,addr,b)
-
-#elif defined(CONFIG_SH_SECUREEDGE5410)
-#include <asm/snapgear/io.h>
-
-#define RTC_PORT(n) SECUREEDGE_IOPORT_ADDR
-#define CMOS_READ(addr) secureedge5410_cmos_read(addr)
-#define CMOS_WRITE(val,addr) secureedge5410_cmos_write(val,addr)
-extern unsigned char secureedge5410_cmos_read(int addr);
-extern void secureedge5410_cmos_write(unsigned char val, int addr);
-
-#elif defined(CONFIG_CPU_SH4)
-#define RTC_PORT(n) (R64CNT+(n)*4)
-#define CMOS_READ(addr) __CMOS_READ(addr,w)
-#define CMOS_WRITE(val,addr) __CMOS_WRITE(val,addr,w)
-#endif
-
-#define __CMOS_READ(addr, s) ({ \
- unsigned char val=0, rcr1, rcr2, r64cnt, retry; \
- switch(addr) { \
- case RTC_SECONDS: \
- val = ctrl_inb(RSECCNT); \
- break; \
- case RTC_SECONDS_ALARM: \
- val = ctrl_inb(RSECAR); \
- break; \
- case RTC_MINUTES: \
- val = ctrl_inb(RMINCNT); \
- break; \
- case RTC_MINUTES_ALARM: \
- val = ctrl_inb(RMINAR); \
- break; \
- case RTC_HOURS: \
- val = ctrl_inb(RHRCNT); \
- break; \
- case RTC_HOURS_ALARM: \
- val = ctrl_inb(RHRAR); \
- break; \
- case RTC_DAY_OF_WEEK: \
- val = ctrl_inb(RWKCNT); \
- break; \
- case RTC_DAY_OF_MONTH: \
- val = ctrl_inb(RDAYCNT); \
- break; \
- case RTC_MONTH: \
- val = ctrl_inb(RMONCNT); \
- break; \
- case RTC_YEAR: \
- val = ctrl_in##s(RYRCNT); \
- break; \
- case RTC_REG_A: /* RTC_FREQ_SELECT */ \
- rcr2 = ctrl_inb(RCR2); \
- val = (rcr2 & RCR2_PESMASK) >> 4; \
- rcr1 = ctrl_inb(RCR1); \
- rcr1 = (rcr1 & (RCR1_CIE | RCR1_AIE)) | RCR1_AF;\
- retry = 0; \
- do { \
- ctrl_outb(rcr1, RCR1); /* clear CF */ \
- r64cnt = ctrl_inb(R64CNT); \
- } while((ctrl_inb(RCR1) & RCR1_CF) && retry++ < 1000);\
- r64cnt ^= RTC_BIT_INVERTED; \
- if(r64cnt == 0x7f || r64cnt == 0) \
- val |= RTC_UIP; \
- break; \
- case RTC_REG_B: /* RTC_CONTROL */ \
- rcr1 = ctrl_inb(RCR1); \
- rcr2 = ctrl_inb(RCR2); \
- if(rcr1 & RCR1_CIE) val |= RTC_UIE; \
- if(rcr1 & RCR1_AIE) val |= RTC_AIE; \
- if(rcr2 & RCR2_PESMASK) val |= RTC_PIE; \
- if(!(rcr2 & RCR2_START))val |= RTC_SET; \
- val |= RTC_24H; \
- break; \
- case RTC_REG_C: /* RTC_INTR_FLAGS */ \
- rcr1 = ctrl_inb(RCR1); \
- rcr1 &= ~(RCR1_CF | RCR1_AF); \
- ctrl_outb(rcr1, RCR1); \
- rcr2 = ctrl_inb(RCR2); \
- rcr2 &= ~RCR2_PEF; \
- ctrl_outb(rcr2, RCR2); \
- break; \
- case RTC_REG_D: /* RTC_VALID */ \
- /* Always valid ... */ \
- val = RTC_VRT; \
- break; \
- default: \
- break; \
- } \
- val; \
-})
-
-#define __CMOS_WRITE(val, addr, s) ({ \
- unsigned char rcr1,rcr2; \
- switch(addr) { \
- case RTC_SECONDS: \
- ctrl_outb(val, RSECCNT); \
- break; \
- case RTC_SECONDS_ALARM: \
- ctrl_outb(val, RSECAR); \
- break; \
- case RTC_MINUTES: \
- ctrl_outb(val, RMINCNT); \
- break; \
- case RTC_MINUTES_ALARM: \
- ctrl_outb(val, RMINAR); \
- break; \
- case RTC_HOURS: \
- ctrl_outb(val, RHRCNT); \
- break; \
- case RTC_HOURS_ALARM: \
- ctrl_outb(val, RHRAR); \
- break; \
- case RTC_DAY_OF_WEEK: \
- ctrl_outb(val, RWKCNT); \
- break; \
- case RTC_DAY_OF_MONTH: \
- ctrl_outb(val, RDAYCNT); \
- break; \
- case RTC_MONTH: \
- ctrl_outb(val, RMONCNT); \
- break; \
- case RTC_YEAR: \
- ctrl_out##s((ctrl_in##s(RYRCNT) & 0xff00) | (val & 0xff), RYRCNT);\
- break; \
- case RTC_REG_A: /* RTC_FREQ_SELECT */ \
- rcr2 = ctrl_inb(RCR2); \
- if((val & RTC_DIV_CTL) == RTC_DIV_RESET2) \
- rcr2 |= RCR2_RESET; \
- ctrl_outb(rcr2, RCR2); \
- break; \
- case RTC_REG_B: /* RTC_CONTROL */ \
- rcr1 = (ctrl_inb(RCR1) & 0x99) | RCR1_AF; \
- if(val & RTC_AIE) rcr1 |= RCR1_AIE; \
- else rcr1 &= ~RCR1_AIE; \
- if(val & RTC_UIE) rcr1 |= RCR1_CIE; \
- else rcr1 &= ~RCR1_CIE; \
- ctrl_outb(rcr1, RCR1); \
- rcr2 = ctrl_inb(RCR2); \
- if(val & RTC_SET) rcr2 &= ~RCR2_START; \
- else rcr2 |= RCR2_START; \
- ctrl_outb(rcr2, RCR2); \
- break; \
- case RTC_REG_C: /* RTC_INTR_FLAGS */ \
- break; \
- case RTC_REG_D: /* RTC_VALID */ \
- break; \
- default: \
- break; \
- } \
-})
-
-#endif /* CONFIG_SH_MPC1211 */
#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h
index 72f07be..cf47df7 100644
--- a/include/asm-sh/mmu.h
+++ b/include/asm-sh/mmu.h
@@ -3,27 +3,76 @@
#if !defined(CONFIG_MMU)
-struct mm_rblock_struct {
- int size;
- int refcount;
- void *kblock;
-};
-
-struct mm_tblock_struct {
- struct mm_rblock_struct *rblock;
- struct mm_tblock_struct *next;
-};
-
typedef struct {
- struct mm_tblock_struct tblock;
+ struct vm_list_struct *vmlist;
unsigned long end_brk;
} mm_context_t;
#else
/* Default "unsigned long" context */
-typedef unsigned long mm_context_t;
+typedef unsigned long mm_context_id_t;
+
+typedef struct {
+ mm_context_id_t id;
+ void *vdso;
+} mm_context_t;
#endif /* CONFIG_MMU */
-#endif /* __MMH_H */
+
+/*
+ * Privileged Space Mapping Buffer (PMB) definitions
+ */
+#define PMB_PASCR 0xff000070
+#define PMB_IRMCR 0xff000078
+
+#define PMB_ADDR 0xf6100000
+#define PMB_DATA 0xf7100000
+#define PMB_ENTRY_MAX 16
+#define PMB_E_MASK 0x0000000f
+#define PMB_E_SHIFT 8
+
+#define PMB_SZ_16M 0x00000000
+#define PMB_SZ_64M 0x00000010
+#define PMB_SZ_128M 0x00000080
+#define PMB_SZ_512M 0x00000090
+#define PMB_SZ_MASK PMB_SZ_512M
+#define PMB_C 0x00000008
+#define PMB_WT 0x00000001
+#define PMB_UB 0x00000200
+#define PMB_V 0x00000100
+
+#define PMB_NO_ENTRY (-1)
+
+struct pmb_entry;
+
+struct pmb_entry {
+ unsigned long vpn;
+ unsigned long ppn;
+ unsigned long flags;
+
+ /*
+ * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+ * PMB_NO_ENTRY to search for a free one
+ */
+ int entry;
+
+ struct pmb_entry *next;
+ /* Adjacent entry link for contiguous multi-entry mappings */
+ struct pmb_entry *link;
+};
+
+/* arch/sh/mm/pmb.c */
+int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+ unsigned long flags, int *entry);
+int set_pmb_entry(struct pmb_entry *pmbe);
+void clear_pmb_entry(struct pmb_entry *pmbe);
+struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+ unsigned long flags);
+void pmb_free(struct pmb_entry *pmbe);
+long pmb_remap(unsigned long virt, unsigned long phys,
+ unsigned long size, unsigned long flags);
+void pmb_unmap(unsigned long addr);
+
+#endif /* __MMU_H */
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
index 6760d06..c7088ef 100644
--- a/include/asm-sh/mmu_context.h
+++ b/include/asm-sh/mmu_context.h
@@ -49,7 +49,7 @@
unsigned long mc = mmu_context_cache;
/* Check if we have old version of context. */
- if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0)
+ if (((mm->context.id ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0)
/* It's up to date, do nothing */
return;
@@ -68,7 +68,7 @@
if (!mc)
mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
}
- mm->context = mc;
+ mm->context.id = mc;
}
/*
@@ -78,7 +78,7 @@
static __inline__ int init_new_context(struct task_struct *tsk,
struct mm_struct *mm)
{
- mm->context = NO_CONTEXT;
+ mm->context.id = NO_CONTEXT;
return 0;
}
@@ -123,7 +123,7 @@
static __inline__ void activate_context(struct mm_struct *mm)
{
get_mmu_context(mm);
- set_asid(mm->context & MMU_CONTEXT_ASID_MASK);
+ set_asid(mm->context.id & MMU_CONTEXT_ASID_MASK);
}
/* MMU_TTB can be used for optimizing the fault handling.
@@ -174,9 +174,7 @@
{
/* Enable MMU */
ctrl_outl(MMU_CONTROL_INIT, MMUCR);
-
- /* The manual suggests doing some nops after turning on the MMU */
- __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop\n\t");
+ ctrl_barrier();
if (mmu_context_cache == NO_CONTEXT)
mmu_context_cache = MMU_CONTEXT_FIRST_VERSION;
@@ -191,7 +189,8 @@
cr = ctrl_inl(MMUCR);
cr &= ~MMU_CONTROL_INIT;
ctrl_outl(cr, MMUCR);
- __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop\n\t");
+
+ ctrl_barrier();
}
#else
/*
diff --git a/include/asm-sh/overdrive/fpga.h b/include/asm-sh/overdrive/fpga.h
deleted file mode 100644
index 1cd8799..0000000
--- a/include/asm-sh/overdrive/fpga.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-
-#ifndef __FPGA_OD_H__
-#define __FPGA_OD_H__
-
-/* This routine will program up the fpga which interfaces to the galileo */
-int init_overdrive_fpga(void);
-
-#endif
diff --git a/include/asm-sh/overdrive/gt64111.h b/include/asm-sh/overdrive/gt64111.h
deleted file mode 100644
index 01d58bc..0000000
--- a/include/asm-sh/overdrive/gt64111.h
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef _GT64111_H_
-#define _GT64111_H_
-
-#define MASTER_INTERFACE 0x0
-#define RAS10_LO_DEC_ADR 0x8
-#define RAS10_HI_DEC_ADR 0x10
-#define RAS32_LO_DEC_ADR 0x18
-#define RAS32_HI_DEC_ADR 0x20
-#define CS20_LO_DEC_ADR 0x28
-#define CS20_HI_DEC_ADR 0x30
-#define CS3_LO_DEC_ADR 0x38
-#define CS3_HI_DEC_ADR 0x40
-#define PCI_IO_LO_DEC_ADR 0x48
-#define PCI_IO_HI_DEC_ADR 0x50
-#define PCI_MEM0_LO_DEC_ADR 0x58
-#define PCI_MEM0_HI_DEC_ADR 0x60
-#define INTERNAL_SPACE_DEC 0x68
-#define BUS_ERR_ADR_LO_CPU 0x70
-#define READONLY0 0x78
-#define PCI_MEM1_LO_DEC_ADR 0x80
-#define PCI_MEM1_HI_DEC_ADR 0x88
-#define RAS0_LO_DEC_ADR 0x400
-#define RAS0_HI_DEC_ADR 0x404
-#define RAS1_LO_DEC_ADR 0x408
-#define RAS1_HI_DEC_ADR 0x40c
-#define RAS2_LO_DEC_ADR 0x410
-#define RAS2_HI_DEC_ADR 0x414
-#define RAS3_LO_DEC_ADR 0x418
-#define RAS3_HI_DEC_ADR 0x41c
-#define DEV_CS0_LO_DEC_ADR 0x420
-#define DEV_CS0_HI_DEC_ADR 0x424
-#define DEV_CS1_LO_DEC_ADR 0x428
-#define DEV_CS1_HI_DEC_ADR 0x42c
-#define DEV_CS2_LO_DEC_ADR 0x430
-#define DEV_CS2_HI_DEC_ADR 0x434
-#define DEV_CS3_LO_DEC_ADR 0x438
-#define DEV_CS3_HI_DEC_ADR 0x43c
-#define DEV_BOOTCS_LO_DEC_ADR 0x440
-#define DEV_BOOTCS_HI_DEC_ADR 0x444
-#define DEV_ADR_DEC_ERR 0x470
-#define DRAM_CFG 0x448
-#define DRAM_BANK0_PARMS 0x44c
-#define DRAM_BANK1_PARMS 0x450
-#define DRAM_BANK2_PARMS 0x454
-#define DRAM_BANK3_PARMS 0x458
-#define DEV_BANK0_PARMS 0x45c
-#define DEV_BANK1_PARMS 0x460
-#define DEV_BANK2_PARMS 0x464
-#define DEV_BANK3_PARMS 0x468
-#define DEV_BOOT_BANK_PARMS 0x46c
-#define CH0_DMA_BYTECOUNT 0x800
-#define CH1_DMA_BYTECOUNT 0x804
-#define CH2_DMA_BYTECOUNT 0x808
-#define CH3_DMA_BYTECOUNT 0x80c
-#define CH0_DMA_SRC_ADR 0x810
-#define CH1_DMA_SRC_ADR 0x814
-#define CH2_DMA_SRC_ADR 0x818
-#define CH3_DMA_SRC_ADR 0x81c
-#define CH0_DMA_DST_ADR 0x820
-#define CH1_DMA_DST_ADR 0x824
-#define CH2_DMA_DST_ADR 0x828
-#define CH3_DMA_DST_ADR 0x82c
-#define CH0_NEXT_REC_PTR 0x830
-#define CH1_NEXT_REC_PTR 0x834
-#define CH2_NEXT_REC_PTR 0x838
-#define CH3_NEXT_REC_PTR 0x83c
-#define CH0_CTRL 0x840
-#define CH1_CTRL 0x844
-#define CH2_CTRL 0x848
-#define CH3_CTRL 0x84c
-#define DMA_ARBITER 0x860
-#define TIMER0 0x850
-#define TIMER1 0x854
-#define TIMER2 0x858
-#define TIMER3 0x85c
-#define TIMER_CTRL 0x864
-#define PCI_CMD 0xc00
-#define PCI_TIMEOUT 0xc04
-#define PCI_RAS10_BANK_SIZE 0xc08
-#define PCI_RAS32_BANK_SIZE 0xc0c
-#define PCI_CS20_BANK_SIZE 0xc10
-#define PCI_CS3_BANK_SIZE 0xc14
-#define PCI_SERRMASK 0xc28
-#define PCI_INTACK 0xc34
-#define PCI_BAR_EN 0xc3c
-#define PCI_CFG_ADR 0xcf8
-#define PCI_CFG_DATA 0xcfc
-#define PCI_INTCAUSE 0xc18
-#define PCI_MAST_MASK 0xc1c
-#define PCI_PCIMASK 0xc24
-#define BAR_ENABLE_ADR 0xc3c
-
-/* These are config registers, accessible via PCI space */
-#define PCI_CONFIG_RAS10_BASE_ADR 0x010
-#define PCI_CONFIG_RAS32_BASE_ADR 0x014
-#define PCI_CONFIG_CS20_BASE_ADR 0x018
-#define PCI_CONFIG_CS3_BASE_ADR 0x01c
-#define PCI_CONFIG_INT_REG_MM_ADR 0x020
-#define PCI_CONFIG_INT_REG_IO_ADR 0x024
-#define PCI_CONFIG_BOARD_VENDOR 0x02c
-#define PCI_CONFIG_ROM_ADR 0x030
-#define PCI_CONFIG_INT_PIN_LINE 0x03c
-
-
-
-
-
-#endif
-
diff --git a/include/asm-sh/overdrive/io.h b/include/asm-sh/overdrive/io.h
deleted file mode 100644
index 0dba700..0000000
--- a/include/asm-sh/overdrive/io.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-sh/io_od.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an STMicroelectronics Overdrive
- */
-
-#ifndef _ASM_SH_IO_OD_H
-#define _ASM_SH_IO_OD_H
-
-extern unsigned char od_inb(unsigned long port);
-extern unsigned short od_inw(unsigned long port);
-extern unsigned int od_inl(unsigned long port);
-
-extern void od_outb(unsigned char value, unsigned long port);
-extern void od_outw(unsigned short value, unsigned long port);
-extern void od_outl(unsigned int value, unsigned long port);
-
-extern unsigned char od_inb_p(unsigned long port);
-extern unsigned short od_inw_p(unsigned long port);
-extern unsigned int od_inl_p(unsigned long port);
-extern void od_outb_p(unsigned char value, unsigned long port);
-extern void od_outw_p(unsigned short value, unsigned long port);
-extern void od_outl_p(unsigned int value, unsigned long port);
-
-extern void od_insb(unsigned long port, void *addr, unsigned long count);
-extern void od_insw(unsigned long port, void *addr, unsigned long count);
-extern void od_insl(unsigned long port, void *addr, unsigned long count);
-extern void od_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void od_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void od_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long od_isa_port2addr(unsigned long offset);
-
-#endif /* _ASM_SH_IO_OD_H */
diff --git a/include/asm-sh/overdrive/overdrive.h b/include/asm-sh/overdrive/overdrive.h
deleted file mode 100644
index fc746c2..0000000
--- a/include/asm-sh/overdrive/overdrive.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-
-
-#ifndef __OVERDRIVE_H__
-#define __OVERDRIVE_H__
-
-#define OVERDRIVE_INT_CT 0xa3a00000
-#define OVERDRIVE_INT_DT 0xa3b00000
-
-#define OVERDRIVE_CTRL 0xa3000000
-
-/* Shoving all these bits into the same register is not a good idea.
- * As soon as I get a spare moment, I'll change the FPGA and put each
- * bit in a separate register
- */
-
-#define VALID_CTRL_BITS 0x1f
-
-#define ENABLE_RS232_MASK 0x1e
-#define DISABLE_RS232_BIT 0x01
-
-#define ENABLE_NMI_MASK 0x1d
-#define DISABLE_NMI_BIT 0x02
-
-#define RESET_PCI_MASK 0x1b
-#define ENABLE_PCI_BIT 0x04
-
-#define ENABLE_LED_MASK 0x17
-#define DISABLE_LED_BIT 0x08
-
-#define RESET_FPGA_MASK 0x0f
-#define ENABLE_FPGA_BIT 0x10
-
-
-#define FPGA_DCLK_ADDRESS 0xA3C00000
-
-#define FPGA_DATA 0x01 /* W */
-#define FPGA_CONFDONE 0x02 /* R */
-#define FPGA_NOT_STATUS 0x04 /* R */
-#define FPGA_INITDONE 0x08 /* R */
-
-#define FPGA_TIMEOUT 100000
-
-
-/* Interrupts for the overdrive. Note that these numbers have
- * nothing to do with the actual IRQ numbers they appear on,
- * this is all programmable. This is simply the position in the
- * INT_CT register.
- */
-
-#define OVERDRIVE_PCI_INTA 0
-#define OVERDRIVE_PCI_INTB 1
-#define OVERDRIVE_PCI_INTC 2
-#define OVERDRIVE_PCI_INTD 3
-#define OVERDRIVE_GALILEO_INT 4
-#define OVERDRIVE_GALILEO_LOCAL_INT 5
-#define OVERDRIVE_AUDIO_INT 6
-#define OVERDRIVE_KEYBOARD_INT 7
-
-/* Which Linux IRQ should we assign to each interrupt source? */
-#define OVERDRIVE_PCI_IRQ1 2
-#ifdef CONFIG_HACKED_NE2K
-#define OVERDRIVE_PCI_IRQ2 7
-#else
-#define OVERDRIVE_PCI_IRQ2 2
-#undef OVERDRIVE_PCI_INTB
-#define OVERDRIVE_PCI_INTB OVERDRIVE_PCI_INTA
-
-#endif
-
-/* Put the ESS solo audio chip on IRQ 4 */
-#define OVERDRIVE_ESS_IRQ 4
-
-/* Where the memory behind the PCI bus appears */
-#define PCI_DRAM_BASE 0xb7000000
-#define PCI_DRAM_SIZE (16*1024*1024)
-#define PCI_DRAM_FINISH (PCI_DRAM_BASE+PCI_DRAM_SIZE-1)
-
-/* Where the IO region appears in the memory */
-#define PCI_GTIO_BASE 0xb8000000
-
-#endif
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index 6f7eb8a..ca8b26d 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -16,7 +16,13 @@
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
+
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#else
#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#endif
+
#define PAGE_MASK (~(PAGE_SIZE-1))
#define PTE_MASK PAGE_MASK
@@ -30,7 +36,6 @@
#define HPAGE_SIZE (1UL << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE-1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT)
-#define ARCH_HAS_SETCLEAR_HUGE_PTE
#endif
#ifdef __KERNEL__
@@ -39,10 +44,18 @@
extern void (*clear_page)(void *to);
extern void (*copy_page)(void *to, void *from);
+extern unsigned long shm_align_mask;
+
+#ifdef CONFIG_MMU
extern void clear_page_slow(void *to);
extern void copy_page_slow(void *to, void *from);
+#else
+extern void clear_page_nommu(void *to);
+extern void copy_page_nommu(void *to, void *from);
+#endif
-#if defined(CONFIG_SH7705_CACHE_32KB) && defined(CONFIG_MMU)
+#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \
+ defined(CONFIG_SH7705_CACHE_32KB))
struct page;
extern void clear_user_page(void *to, unsigned long address, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
@@ -51,29 +64,20 @@
#elif defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH3) || !defined(CONFIG_MMU)
#define clear_user_page(page, vaddr, pg) clear_page(page)
#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-#elif defined(CONFIG_CPU_SH4)
-struct page;
-extern void clear_user_page(void *to, unsigned long address, struct page *pg);
-extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
-extern void __clear_user_page(void *to, void *orig_to);
-extern void __copy_user_page(void *to, void *from, void *orig_to);
#endif
/*
* These are used to make use of C type-checking..
*/
typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((x).pmd)
#define pgd_val(x) ((x).pgd)
#define pgprot_val(x) ((x).pgprot)
#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
#define __pgd(x) ((pgd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
@@ -93,7 +97,7 @@
#define __MEMORY_START CONFIG_MEMORY_START
#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
-#define PAGE_OFFSET (0x80000000UL)
+#define PAGE_OFFSET CONFIG_PAGE_OFFSET
#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET)
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET))
@@ -115,5 +119,10 @@
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
+/* vDSO support */
+#ifdef CONFIG_VSYSCALL
+#define __HAVE_ARCH_GATE_AREA
+#endif
+
#endif /* __KERNEL__ */
#endif /* __ASM_SH_PAGE_H */
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index 0a523c8..6ccc948 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -32,6 +32,34 @@
#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start
#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start
+/*
+ * I/O routine helpers
+ */
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#define PCI_IO_AREA 0xFE400000
+#define PCI_IO_SIZE 0x00400000
+#else
+#define PCI_IO_AREA 0xFE240000
+#define PCI_IO_SIZE 0X00040000
+#endif
+
+#define PCI_MEM_SIZE 0x01000000
+
+#define SH4_PCIIOBR_MASK 0xFFFC0000
+#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
+
+#if defined(CONFIG_PCI)
+#define is_pci_ioaddr(port) \
+ (((port) >= PCIBIOS_MIN_IO) && \
+ ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
+#define is_pci_memaddr(port) \
+ (((port) >= PCIBIOS_MIN_MEM) && \
+ ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
+#else
+#define is_pci_ioaddr(port) (0)
+#define is_pci_memaddr(port) (0)
+#endif
+
struct pci_dev;
extern void pcibios_set_master(struct pci_dev *dev);
@@ -87,15 +115,6 @@
*/
#define pci_dac_dma_supported(pci_dev, mask) (0)
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) (virt_to_bus((sg)->dma_address))
-#define sg_dma_len(sg) ((sg)->length)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
@@ -107,11 +126,12 @@
#endif
/* Board-specific fixup routines. */
-extern void pcibios_fixup(void);
-extern void pcibios_fixup_irqs(void);
+void pcibios_fixup(void);
+int pcibios_init_platform(void);
+int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
#ifdef CONFIG_PCI_AUTO
-extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
+int pciauto_assign_resources(int busno, struct pci_channel *hose);
#endif
static inline void pcibios_add_platform_entries(struct pci_dev *dev)
diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h
index f4f233f..e841465 100644
--- a/include/asm-sh/pgalloc.h
+++ b/include/asm-sh/pgalloc.h
@@ -1,15 +1,6 @@
#ifndef __ASM_SH_PGALLOC_H
#define __ASM_SH_PGALLOC_H
-#include <linux/threads.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-
-#define pgd_quicklist ((unsigned long *)0)
-#define pmd_quicklist ((unsigned long *)0)
-#define pte_quicklist ((unsigned long *)0)
-#define pgtable_cache_size 0L
-
#define pmd_populate_kernel(mm, pmd, pte) \
set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
@@ -24,38 +15,24 @@
*/
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
- unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t));
- pgd_t *pgd = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL);
-
- if (pgd)
- memset(pgd, 0, pgd_size);
-
- return pgd;
+ return (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
}
static inline void pgd_free(pgd_t *pgd)
{
- kfree(pgd);
+ free_page((unsigned long)pgd);
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
- pte_t *pte;
-
- pte = (pte_t *) __get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
-
- return pte;
+ return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
}
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
- struct page *pte;
-
- pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
-
- return pte;
+ return alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
}
static inline void pte_free_kernel(pte_t *pte)
@@ -75,14 +52,8 @@
* inside the pgd, so has no extra memory associated with it.
*/
-#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); })
#define pmd_free(x) do { } while (0)
#define __pmd_free_tlb(tlb,x) do { } while (0)
-#define pgd_populate(mm, pmd, pte) BUG()
#define check_pgt_cache() do { } while (0)
-#ifdef CONFIG_CPU_SH4
-#define PG_mapped PG_arch_1
-#endif
-
#endif /* __ASM_SH_PGALLOC_H */
diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h
index 40d41a7..2c8682a 100644
--- a/include/asm-sh/pgtable.h
+++ b/include/asm-sh/pgtable.h
@@ -1,42 +1,42 @@
+/*
+ * This file contains the functions and defines necessary to modify and
+ * use the SuperH page table tree.
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002 - 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ */
#ifndef __ASM_SH_PGTABLE_H
#define __ASM_SH_PGTABLE_H
-#include <asm-generic/4level-fixup.h>
+#include <asm-generic/pgtable-nopmd.h>
+#include <asm/page.h>
-/*
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- */
+#define PTRS_PER_PGD 1024
-#include <asm/pgtable-2level.h>
-
-/*
- * This file contains the functions and defines necessary to modify and use
- * the SuperH page table tree.
- */
#ifndef __ASSEMBLY__
-#include <asm/processor.h>
#include <asm/addrspace.h>
#include <asm/fixmap.h>
-#include <linux/threads.h>
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern void paging_init(void);
/*
- * Basically we have the same two-level (which is the logical three level
- * Linux page table layout folded) page tables as the i386.
- */
-
-/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
-extern unsigned long empty_zero_page[1024];
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
#endif /* !__ASSEMBLY__ */
+/* traditional two-level paging structure */
+#define PGDIR_SHIFT 22
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PTE 1024
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
@@ -47,7 +47,6 @@
#define PTE_PHYS_MASK 0x1ffff000
-#ifndef __ASSEMBLY__
/*
* First 1MB map is used by fixed purpose.
* Currently only 4-enty (16kB) is used (see arch/sh/mm/cache.c)
@@ -55,20 +54,41 @@
#define VMALLOC_START (P3SEG+0x00100000)
#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
-#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */
-#define _PAGE_HW_SHARED 0x002 /* SH-bit : page is shared among processes */
-#define _PAGE_DIRTY 0x004 /* D-bit : page changed */
-#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */
-#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */
-#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */
-#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed */
-#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */
-#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */
-#define _PAGE_PROTNONE 0x200 /* software: if not present */
-#define _PAGE_ACCESSED 0x400 /* software: page referenced */
-#define _PAGE_U0_SHARED 0x800 /* software: page is shared in user space */
-
-#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */
+/*
+ * Linux PTEL encoding.
+ *
+ * Hardware and software bit definitions for the PTEL value:
+ *
+ * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
+ *
+ * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
+ * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
+ * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
+ *
+ * In order to keep this relatively clean, do not use these for defining
+ * SH-3 specific flags until all of the other unused bits have been
+ * exhausted.
+ *
+ * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
+ *
+ * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
+ * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
+ *
+ * - Bits 31, 30, and 29 remain unused by everyone and can be used for future
+ * software flags, although care must be taken to update _PAGE_CLEAR_FLAGS.
+ */
+#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */
+#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */
+#define _PAGE_DIRTY 0x004 /* D-bit : page changed */
+#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */
+#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */
+#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */
+#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed */
+#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */
+#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */
+#define _PAGE_PROTNONE 0x200 /* software: if not present */
+#define _PAGE_ACCESSED 0x400 /* software: page referenced */
+#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */
/* software: moves to PTEA.TC (Timing Control) */
#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */
@@ -83,23 +103,17 @@
#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */
#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */
-
-/* Mask which drop software flags
- * We also drop WT bit since it is used for _PAGE_FILE
- * bit in this implementation.
- */
-#define _PAGE_CLEAR_FLAGS (_PAGE_WT | _PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_U0_SHARED)
-
-#if defined(CONFIG_CPU_SH3)
-/*
- * MMU on SH-3 has bug on SH-bit: We can't use it if MMUCR.IX=1.
- * Work around: Just drop SH-bit.
- */
-#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS | _PAGE_HW_SHARED))
+/* Mask which drops unused bits from the PTEL value */
+#ifdef CONFIG_CPU_SH3
+#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \
+ _PAGE_FILE | _PAGE_SZ1 | \
+ _PAGE_HW_SHARED)
#else
-#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS))
+#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
#endif
+#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS))
+
/* Hardware flags: SZ0=1 (4k-byte) */
#define _PAGE_FLAGS_HARD _PAGE_SZ0
@@ -109,15 +123,15 @@
#define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1)
#endif
-#define _PAGE_SHARED _PAGE_U0_SHARED
-
#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_SHARED)
+#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+
+#ifndef __ASSEMBLY__
#ifdef CONFIG_MMU
#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD)
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_SHARED | _PAGE_FLAGS_HARD)
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD)
#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
@@ -137,12 +151,13 @@
#define PAGE_KERNEL_PCC __pgprot(0)
#endif
+#endif /* __ASSEMBLY__ */
+
/*
* As i386 and MIPS, SuperH can't do page protection for execute, and
* considers that the same as a read. Also, write permissions imply
- * read permissions. This is the closest we can get..
+ * read permissions. This is the closest we can get..
*/
-
#define __P000 PAGE_NONE
#define __P001 PAGE_READONLY
#define __P010 PAGE_COPY
@@ -161,6 +176,26 @@
#define __S110 PAGE_SHARED
#define __S111 PAGE_SHARED
+#ifndef __ASSEMBLY__
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
#define pte_none(x) (!pte_val(x))
#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
@@ -171,7 +206,7 @@
#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-#define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK)
+#define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK)
/*
* The following only work if pte_present() is true.
@@ -248,6 +283,11 @@
#define pte_unmap(pte) do { } while (0)
#define pte_unmap_nested(pte) do { } while (0)
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct * vma,
unsigned long address, pte_t pte);
@@ -272,8 +312,6 @@
typedef pte_t *pte_addr_t;
-#endif /* !__ASSEMBLY__ */
-
#define kern_addr_valid(addr) (1)
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
@@ -301,5 +339,5 @@
#include <asm-generic/pgtable.h>
+#endif /* !__ASSEMBLY__ */
#endif /* __ASM_SH_PAGE_H */
-
diff --git a/include/asm-sh/pm.h b/include/asm-sh/pm.h
new file mode 100644
index 0000000..56fdbd6
--- /dev/null
+++ b/include/asm-sh/pm.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ */
+#ifndef __ASM_SH_PM_H
+#define __ASM_SH_PM_H
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+void pm_enter(void);
+
+#endif
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index eeb0f48..4747738 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -14,6 +14,7 @@
#include <asm/types.h>
#include <asm/cache.h>
#include <asm/ptrace.h>
+#include <asm/cpu-features.h>
/*
* Default implementation of macro that returns current
@@ -38,27 +39,30 @@
CPU_SH7604,
/* SH-3 types */
- CPU_SH7705, CPU_SH7707, CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
- CPU_SH7709, CPU_SH7709A, CPU_SH7729, CPU_SH7300,
+ CPU_SH7705, CPU_SH7706, CPU_SH7707,
+ CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
+ CPU_SH7709, CPU_SH7709A, CPU_SH7710,
+ CPU_SH7729, CPU_SH7300,
/* SH-4 types */
CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501,
- CPU_SH73180, CPU_SH7770, CPU_SH7780, CPU_SH7781,
+ CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781,
/* Unknown subtype */
CPU_SH_NONE
};
struct sh_cpuinfo {
- enum cpu_type type;
+ unsigned int type;
unsigned long loops_per_jiffy;
- struct cache_info icache;
- struct cache_info dcache;
+ struct cache_info icache; /* Primary I-cache */
+ struct cache_info dcache; /* Primary D-cache */
+ struct cache_info scache; /* Secondary cache */
unsigned long flags;
-};
+} __attribute__ ((aligned(SMP_CACHE_BYTES)));
extern struct sh_cpuinfo boot_cpu_data;
@@ -125,17 +129,6 @@
struct sh_fpu_soft_struct soft;
};
-/*
- * Processor flags
- */
-
-#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */
-#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */
-#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */
-#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */
-#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */
-#define CPU_HAS_PTEA 0x0020 /* PTEA register */
-
struct thread_struct {
unsigned long sp;
unsigned long pc;
@@ -149,6 +142,10 @@
union sh_fpu_union fpu;
};
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
/* Count of active tasks with UBC settings */
extern int ubc_usercnt;
@@ -266,5 +263,24 @@
#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory")
#define cpu_relax() barrier()
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
+ defined(CONFIG_CPU_SH4)
+#define PREFETCH_STRIDE L1_CACHE_BYTES
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+static inline void prefetch(void *x)
+{
+ __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+}
+
+#define prefetchw(x) prefetch(x)
+#endif
+
+#ifdef CONFIG_VSYSCALL
+extern int vsyscall_init(void);
+#else
+#define vsyscall_init() do { } while (0)
+#endif
+
#endif /* __KERNEL__ */
#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/include/asm-sh/r7780rp/ide.h b/include/asm-sh/r7780rp/ide.h
new file mode 100644
index 0000000..a1ed78e
--- /dev/null
+++ b/include/asm-sh/r7780rp/ide.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_R7780RP_IDE_H
+#define __ASM_SH_R7780RP_IDE_H
+
+/* Nothing to see here.. */
+#include <asm/mach/r7780rp.h>
+
+#endif /* __ASM_SH_R7780RP_IDE_H */
+
diff --git a/include/asm-sh/r7780rp/r7780rp.h b/include/asm-sh/r7780rp/r7780rp.h
new file mode 100644
index 0000000..f95d9db
--- /dev/null
+++ b/include/asm-sh/r7780rp/r7780rp.h
@@ -0,0 +1,177 @@
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/*
+ * linux/include/asm-sh/r7780rp.h
+ *
+ * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Solutions Highlander R7780RP support
+ */
+
+/* Box specific addresses. */
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR 0xa4000000 /* FPGA */
+#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_ICCR (PA_BCR+0x0600) /* Serial control */
+#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */
+#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */
+#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */
+#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */
+#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR (PA_BCR+0x0900) /* */
+
+#define PA_AX88796L 0xa4100400 /* AX88796L Area */
+#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
+#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
+#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
+#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
+#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
+
+#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
+
+#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */
+#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */
+#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */
+#define IRQ_CFCARD 1 /* CF Card IRQ */
+// #define IRQ_CFINST 0 /* CF Card Insert IRQ */
+#define IRQ_TP 2 /* Touch Panel IRQ */
+#define IRQ_SCI1 3 /* SCI1 IRQ */
+#define IRQ_SCI0 4 /* SCI0 IRQ */
+#define IRQ_2SERIAL 5 /* Serial IRQ */
+#define IRQ_RTC 6 /* RTC A / B IRQ */
+#define IRQ_EXTENTION6 7 /* EXT6n IRQ */
+#define IRQ_EXTENTION5 8 /* EXT5n IRQ */
+#define IRQ_EXTENTION4 9 /* EXT4n IRQ */
+#define IRQ_EXTENTION2 10 /* EXT2n IRQ */
+#define IRQ_EXTENTION1 11 /* EXT1n IRQ */
+#define IRQ_ONETH 13 /* On board Ethernet IRQ */
+#define IRQ_PSW 14 /* Push Switch IRQ */
+
+#else /* R7780RP */
+
+#define PA_BCR 0xa5000000 /* FPGA */
+#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
+#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
+#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
+#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
+#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
+#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
+#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
+#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
+#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
+#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
+#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
+#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
+#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
+#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
+#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
+#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
+#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
+#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
+#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
+#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
+#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
+#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
+#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
+#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
+#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
+#define PA_ICCR (PA_BCR+0x0500) /* Serial control */
+#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */
+#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */
+#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */
+#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */
+#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
+
+#define PA_AX88796L 0xa5800400 /* AX88796L Area */
+#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
+#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
+#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
+#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
+#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
+
+#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
+
+#define IRQ_PCISLOT1 0 /* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2 1 /* PCI Slot #2 IRQ */
+#define IRQ_PCISLOT3 2 /* PCI Slot #3 IRQ */
+#define IRQ_PCISLOT4 3 /* PCI Slot #4 IRQ */
+#define IRQ_CFCARD 4 /* CF Card IRQ */
+#define IRQ_CFINST 5 /* CF Card Insert IRQ */
+#define IRQ_M66596 6 /* M66596 IRQ */
+#define IRQ_SDCARD 7 /* SD Card IRQ */
+#define IRQ_TUCHPANEL 8 /* Touch Panel IRQ */
+#define IRQ_SCI 9 /* SCI IRQ */
+#define IRQ_2SERIAL 10 /* Serial IRQ */
+#define IRQ_EXTENTION 11 /* EXTn IRQ */
+#define IRQ_ONETH 12 /* On board Ethernet IRQ */
+#define IRQ_PSW 13 /* Push Switch IRQ */
+#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */
+
+#endif /* CONFIG_SH_R7780MP */
+
+#define __IO_PREFIX r7780rp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_RENESAS_R7780RP */
diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h
index cea9cdf..91aacc9 100644
--- a/include/asm-sh/rtc.h
+++ b/include/asm-sh/rtc.h
@@ -1,29 +1,8 @@
#ifndef _ASM_RTC_H
#define _ASM_RTC_H
-#ifdef __KERNEL__
-#include <asm/machvec.h>
-#include <asm/cpu/rtc.h>
-
-extern void sh_rtc_gettimeofday(struct timespec *ts);
-extern int sh_rtc_settimeofday(const time_t secs);
extern void (*board_time_init)(void);
-extern void (*rtc_get_time)(struct timespec *);
-extern int (*rtc_set_time)(const time_t);
+extern void (*rtc_sh_get_time)(struct timespec *);
+extern int (*rtc_sh_set_time)(const time_t);
-/* RCR1 Bits */
-#define RCR1_CF 0x80 /* Carry Flag */
-#define RCR1_CIE 0x10 /* Carry Interrupt Enable */
-#define RCR1_AIE 0x08 /* Alarm Interrupt Enable */
-#define RCR1_AF 0x01 /* Alarm Flag */
-
-/* RCR2 Bits */
-#define RCR2_PEF 0x80 /* PEriodic interrupt Flag */
-#define RCR2_PESMASK 0x70 /* Periodic interrupt Set */
-#define RCR2_RTCEN 0x08 /* ENable RTC */
-#define RCR2_ADJ 0x04 /* ADJustment (30-second) */
-#define RCR2_RESET 0x02 /* Reset bit */
-#define RCR2_START 0x01 /* Start bit */
-
-#endif /* __KERNEL__ */
#endif /* _ASM_RTC_H */
diff --git a/include/asm-sh/rts7751r2d/rts7751r2d.h b/include/asm-sh/rts7751r2d/rts7751r2d.h
index 4e09ba5..b112ae2 100644
--- a/include/asm-sh/rts7751r2d/rts7751r2d.h
+++ b/include/asm-sh/rts7751r2d/rts7751r2d.h
@@ -41,8 +41,6 @@
#define PA_AX88796L 0xaa000400 /* AX88796L Area */
#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
-#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */
-#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h
index 7b91df1..d19e7cd 100644
--- a/include/asm-sh/scatterlist.h
+++ b/include/asm-sh/scatterlist.h
@@ -10,4 +10,13 @@
#define ISA_DMA_THRESHOLD (0x1fffffff)
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
#endif /* !(__ASM_SH_SCATTERLIST_H) */
diff --git a/include/asm-sh/sci.h b/include/asm-sh/sci.h
new file mode 100644
index 0000000..52e7366
--- /dev/null
+++ b/include/asm-sh/sci.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_SCI_H
+#define __ASM_SH_SCI_H
+
+#include <linux/serial_core.h>
+
+/*
+ * Generic header for SuperH SCI(F)
+ *
+ * Do not place SH-specific parts in here, sh64 and h8300 depend on this too.
+ */
+
+/* Offsets into the sci_port->irqs array */
+enum {
+ SCIx_ERI_IRQ,
+ SCIx_RXI_IRQ,
+ SCIx_TXI_IRQ,
+ SCIx_BRI_IRQ,
+ SCIx_NR_IRQS,
+};
+
+/*
+ * Platform device specific platform_data struct
+ */
+struct plat_sci_port {
+ void __iomem *membase; /* io cookie */
+ unsigned long mapbase; /* resource base */
+ unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */
+ unsigned int type; /* SCI / SCIF / IRDA */
+ upf_t flags; /* UPF_* flags */
+};
+
+int early_sci_setup(struct uart_port *port);
+
+#endif /* __ASM_SH_SCI_H */
diff --git a/include/asm-sh/se/se.h b/include/asm-sh/se.h
similarity index 97%
rename from include/asm-sh/se/se.h
rename to include/asm-sh/se.h
index 791c5da..a183215 100644
--- a/include/asm-sh/se/se.h
+++ b/include/asm-sh/se.h
@@ -74,4 +74,7 @@
#define IRQ_STNIC 10
#endif
+#define __IO_PREFIX se
+#include <asm/io_generic.h>
+
#endif /* __ASM_SH_HITACHI_SE_H */
diff --git a/include/asm-sh/se/io.h b/include/asm-sh/se/io.h
deleted file mode 100644
index 9eeb86c..0000000
--- a/include/asm-sh/se/io.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-sh/io_se.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an Hitachi SolutionEngine
- */
-
-#ifndef _ASM_SH_IO_SE_H
-#define _ASM_SH_IO_SE_H
-
-extern unsigned char se_inb(unsigned long port);
-extern unsigned short se_inw(unsigned long port);
-extern unsigned int se_inl(unsigned long port);
-
-extern void se_outb(unsigned char value, unsigned long port);
-extern void se_outw(unsigned short value, unsigned long port);
-extern void se_outl(unsigned int value, unsigned long port);
-
-extern unsigned char se_inb_p(unsigned long port);
-extern void se_outb_p(unsigned char value, unsigned long port);
-
-extern void se_insb(unsigned long port, void *addr, unsigned long count);
-extern void se_insw(unsigned long port, void *addr, unsigned long count);
-extern void se_insl(unsigned long port, void *addr, unsigned long count);
-extern void se_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void se_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void se_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long se_isa_port2addr(unsigned long offset);
-
-#endif /* _ASM_SH_IO_SE_H */
diff --git a/include/asm-sh/se7300/se7300.h b/include/asm-sh/se7300.h
similarity index 97%
rename from include/asm-sh/se7300/se7300.h
rename to include/asm-sh/se7300.h
index 3ec1ded..4e24edc 100644
--- a/include/asm-sh/se7300/se7300.h
+++ b/include/asm-sh/se7300.h
@@ -58,4 +58,7 @@
#define PA_LCD1 0xb8000000
#define PA_LCD2 0xb8800000
+#define __IO_PREFIX sh7300se
+#include <asm/io_generic.h>
+
#endif /* __ASM_SH_HITACHI_SE7300_H */
diff --git a/include/asm-sh/se7300/io.h b/include/asm-sh/se7300/io.h
deleted file mode 100644
index c6af855..0000000
--- a/include/asm-sh/se7300/io.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-sh/se7300/io.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * IO functions for SH-Mobile(SH7300) SolutionEngine
- */
-
-#ifndef _ASM_SH_IO_7300SE_H
-#define _ASM_SH_IO_7300SE_H
-
-extern unsigned char sh7300se_inb(unsigned long port);
-extern unsigned short sh7300se_inw(unsigned long port);
-extern unsigned int sh7300se_inl(unsigned long port);
-
-extern void sh7300se_outb(unsigned char value, unsigned long port);
-extern void sh7300se_outw(unsigned short value, unsigned long port);
-extern void sh7300se_outl(unsigned int value, unsigned long port);
-
-extern unsigned char sh7300se_inb_p(unsigned long port);
-extern void sh7300se_outb_p(unsigned char value, unsigned long port);
-
-extern void sh7300se_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh7300se_insw(unsigned long port, void *addr, unsigned long count);
-extern void sh7300se_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh7300se_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh7300se_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void sh7300se_outsl(unsigned long port, const void *addr, unsigned long count);
-
-#endif /* _ASM_SH_IO_7300SE_H */
diff --git a/include/asm-sh/se73180/se73180.h b/include/asm-sh/se73180.h
similarity index 97%
rename from include/asm-sh/se73180/se73180.h
rename to include/asm-sh/se73180.h
index f5b93e3..3a4acb3 100644
--- a/include/asm-sh/se73180/se73180.h
+++ b/include/asm-sh/se73180.h
@@ -59,4 +59,7 @@
#define PA_LCD1 0xb8000000
#define PA_LCD2 0xb8800000
+#define __IO_PREFIX sh73180se
+#include <asm/io_generic.h>
+
#endif /* __ASM_SH_HITACHI_SE73180_H */
diff --git a/include/asm-sh/se73180/io.h b/include/asm-sh/se73180/io.h
deleted file mode 100644
index c9cb1b9..0000000
--- a/include/asm-sh/se73180/io.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-sh/se73180/io.h
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Based on include/asm-sh/se7300/io.h
- *
- * IO functions for SH-Mobile3(SH73180) SolutionEngine
- *
- */
-
-#ifndef _ASM_SH_IO_73180SE_H
-#define _ASM_SH_IO_73180SE_H
-
-extern unsigned char sh73180se_inb(unsigned long port);
-extern unsigned short sh73180se_inw(unsigned long port);
-extern unsigned int sh73180se_inl(unsigned long port);
-
-extern void sh73180se_outb(unsigned char value, unsigned long port);
-extern void sh73180se_outw(unsigned short value, unsigned long port);
-extern void sh73180se_outl(unsigned int value, unsigned long port);
-
-extern unsigned char sh73180se_inb_p(unsigned long port);
-extern void sh73180se_outb_p(unsigned char value, unsigned long port);
-
-extern void sh73180se_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh73180se_insw(unsigned long port, void *addr, unsigned long count);
-extern void sh73180se_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh73180se_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh73180se_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void sh73180se_outsl(unsigned long port, const void *addr, unsigned long count);
-
-#endif /* _ASM_SH_IO_73180SE_H */
diff --git a/include/asm-sh/se73180/se73180.h b/include/asm-sh/se7343.h
similarity index 67%
copy from include/asm-sh/se73180/se73180.h
copy to include/asm-sh/se7343.h
index f5b93e3..e7914a5 100644
--- a/include/asm-sh/se73180/se73180.h
+++ b/include/asm-sh/se7343.h
@@ -1,12 +1,12 @@
-#ifndef __ASM_SH_HITACHI_SE73180_H
-#define __ASM_SH_HITACHI_SE73180_H
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
/*
- * include/asm-sh/se/se73180.h
+ * include/asm-sh/se/se7343.h
*
* Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
*
- * SH-Mobile SolutionEngine 73180 support
+ * SH-Mobile SolutionEngine 7343 support
*/
/* Box specific addresses. */
@@ -49,9 +49,9 @@
#define PA_LED 0xb0C00000 /* LED */
#define LED_SHIFT 0
#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
-#define PA_EPLD_MODESET 0xb0a00000 /* FPGA Mode set register */
-#define PA_EPLD_ST1 0xb0a80000 /* FPGA Interrupt status register1 */
-#define PA_EPLD_ST2 0xb0ac0000 /* FPGA Interrupt status register2 */
+#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */
+#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */
+#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */
/* Area 5 */
#define PA_EXT5 0x14000000
#define PA_EXT5_SIZE 0x04000000
@@ -59,4 +59,24 @@
#define PA_LCD1 0xb8000000
#define PA_LCD2 0xb8800000
-#endif /* __ASM_SH_HITACHI_SE73180_H */
+#define __IO_PREFIX sh7343se
+#include <asm/io_generic.h>
+
+/* External Multiplexed interrupts */
+#define PC_IRQ0 OFFCHIP_IRQ_BASE
+#define PC_IRQ1 (PC_IRQ0 + 1)
+#define PC_IRQ2 (PC_IRQ1 + 1)
+#define PC_IRQ3 (PC_IRQ2 + 1)
+
+#define EXT_IRQ0 (PC_IRQ3 + 1)
+#define EXT_IRQ1 (EXT_IRQ0 + 1)
+#define EXT_IRQ2 (EXT_IRQ1 + 1)
+#define EXT_IRQ3 (EXT_IRQ2 + 1)
+
+#define USB_IRQ0 (EXT_IRQ3 + 1)
+#define USB_IRQ1 (USB_IRQ0 + 1)
+
+#define UART_IRQ0 (USB_IRQ1 + 1)
+#define UART_IRQ1 (UART_IRQ0 + 1)
+
+#endif /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/include/asm-sh/se7751/se7751.h b/include/asm-sh/se7751.h
similarity index 97%
rename from include/asm-sh/se7751/se7751.h
rename to include/asm-sh/se7751.h
index 738e22b..88cd379 100644
--- a/include/asm-sh/se7751/se7751.h
+++ b/include/asm-sh/se7751.h
@@ -65,4 +65,7 @@
#define IRQ_79C973 13
+#define __IO_PREFIX sh7751se
+#include <asm/io_generic.h>
+
#endif /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/include/asm-sh/se7751/io.h b/include/asm-sh/se7751/io.h
deleted file mode 100644
index 78d8f57..0000000
--- a/include/asm-sh/se7751/io.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-sh/io_7751se.h
- *
- * Modified version of io_se.h for the 7751se-specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an Hitachi SolutionEngine
- */
-
-#ifndef _ASM_SH_IO_7751SE_H
-#define _ASM_SH_IO_7751SE_H
-
-extern unsigned char sh7751se_inb(unsigned long port);
-extern unsigned short sh7751se_inw(unsigned long port);
-extern unsigned int sh7751se_inl(unsigned long port);
-
-extern void sh7751se_outb(unsigned char value, unsigned long port);
-extern void sh7751se_outw(unsigned short value, unsigned long port);
-extern void sh7751se_outl(unsigned int value, unsigned long port);
-
-extern unsigned char sh7751se_inb_p(unsigned long port);
-extern void sh7751se_outb_p(unsigned char value, unsigned long port);
-
-extern void sh7751se_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh7751se_insw(unsigned long port, void *addr, unsigned long count);
-extern void sh7751se_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh7751se_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh7751se_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned char sh7751se_readb(unsigned long addr);
-extern unsigned short sh7751se_readw(unsigned long addr);
-extern unsigned int sh7751se_readl(unsigned long addr);
-extern void sh7751se_writeb(unsigned char b, unsigned long addr);
-extern void sh7751se_writew(unsigned short b, unsigned long addr);
-extern void sh7751se_writel(unsigned int b, unsigned long addr);
-
-extern unsigned long sh7751se_isa_port2addr(unsigned long offset);
-
-#endif /* _ASM_SH_IO_7751SE_H */
diff --git a/include/asm-sh/setup.h b/include/asm-sh/setup.h
index d19de7c..34ca8a7 100644
--- a/include/asm-sh/setup.h
+++ b/include/asm-sh/setup.h
@@ -4,5 +4,7 @@
#define COMMAND_LINE_SIZE 256
+int setup_early_printk(char *);
+
#endif /* _SH_SETUP_H */
#endif /* __KERNEL__ */
diff --git a/include/asm-sh/sfp-machine.h b/include/asm-sh/sfp-machine.h
new file mode 100644
index 0000000..8a6399a
--- /dev/null
+++ b/include/asm-sh/sfp-machine.h
@@ -0,0 +1,86 @@
+/* Machine-dependent software floating-point definitions.
+ SuperH kernel version.
+ Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+ Contributed by Richard Henderson (rth@cygnus.com),
+ Jakub Jelinek (jj@ultra.linux.cz),
+ David S. Miller (davem@redhat.com) and
+ Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public License as
+ published by the Free Software Foundation; either version 2 of the
+ License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with the GNU C Library; see the file COPYING.LIB. If
+ not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#include <linux/config.h>
+
+#define _FP_W_TYPE_SIZE 32
+#define _FP_W_TYPE unsigned long
+#define _FP_WS_TYPE signed long
+#define _FP_I_TYPE long
+
+#define _FP_MUL_MEAT_S(R,X,Y) \
+ _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y) \
+ _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y) \
+ _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S 0
+#define _FP_NANSIGN_D 0
+#define _FP_NANSIGN_Q 0
+
+#define _FP_KEEPNANFRACP 1
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
+ do { \
+ if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \
+ && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \
+ { \
+ R##_s = Y##_s; \
+ _FP_FRAC_COPY_##wc(R,Y); \
+ } \
+ else \
+ { \
+ R##_s = X##_s; \
+ _FP_FRAC_COPY_##wc(R,X); \
+ } \
+ R##_c = FP_CLS_NAN; \
+ } while (0)
+
+//#define FP_ROUNDMODE FPSCR_RM
+#define FP_DENORM_ZERO 1/*FPSCR_DN*/
+
+/* Exception flags. */
+#define FP_EX_INVALID (1<<4)
+#define FP_EX_DIVZERO (1<<3)
+#define FP_EX_OVERFLOW (1<<2)
+#define FP_EX_UNDERFLOW (1<<1)
+#define FP_EX_INEXACT (1<<0)
+
+#endif
+
diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h
index 25792e9..df3b187 100644
--- a/include/asm-sh/sh03/io.h
+++ b/include/asm-sh/sh03/io.h
@@ -33,14 +33,6 @@
#define IRL3_IPR_POS 0
#define IRL3_PRIORITY 4
-
-extern unsigned long sh03_isa_port2addr(unsigned long offset);
-
-extern void setup_sh03(void);
-extern void init_sh03_IRQ(void);
-extern void heartbeat_sh03(void);
-
-extern void sh03_rtc_gettimeofday(struct timeval *tv);
-extern int sh03_rtc_settimeofday(const struct timeval *tv);
+void heartbeat_sh03(void);
#endif /* _ASM_SH_IO_SH03_H */
diff --git a/include/asm-sh/sh2000/sh2000.h b/include/asm-sh/sh2000/sh2000.h
deleted file mode 100644
index 8d54732..0000000
--- a/include/asm-sh/sh2000/sh2000.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_SH_SH2000_SH2000_H
-#define __ASM_SH_SH2000_SH2000_H
-
-/* arch/sh/boards/sh2000/setup.c */
-extern int setup_sh2000(void);
-
-#endif /* __ASM_SH_SH2000_SH2000_H */
-
diff --git a/include/asm-sh/shmin/shmin.h b/include/asm-sh/shmin/shmin.h
new file mode 100644
index 0000000..36ba138
--- /dev/null
+++ b/include/asm-sh/shmin/shmin.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_SHMIN_H
+#define __ASM_SH_SHMIN_H
+
+#define SHMIN_IO_BASE 0xb0000000UL
+
+#define SHMIN_NE_IRQ IRQ2_IRQ
+#define SHMIN_NE_BASE 0x300
+
+#endif
diff --git a/include/asm-sh/shmparam.h b/include/asm-sh/shmparam.h
index 0a95604..ba1758d 100644
--- a/include/asm-sh/shmparam.h
+++ b/include/asm-sh/shmparam.h
@@ -1,8 +1,22 @@
+/*
+ * include/asm-sh/shmparam.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
#ifndef __ASM_SH_SHMPARAM_H
#define __ASM_SH_SHMPARAM_H
-#ifdef __KERNEL__
-#include <asm/cpu/shmparam.h>
+/*
+ * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
+ * for everyone, and work out the specifics from the probed cache descriptor.
+ */
+#define SHMLBA 0x4000 /* attach addr a multiple of this */
-#endif /* __KERNEL__ */
+#define __ARCH_FORCE_SHMLBA
+
#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/include/asm-sh/se/smc37c93x.h b/include/asm-sh/smc37c93x.h
similarity index 100%
rename from include/asm-sh/se/smc37c93x.h
rename to include/asm-sh/smc37c93x.h
diff --git a/include/asm-sh/smp.h b/include/asm-sh/smp.h
index f57c4fe..71ecddf 100644
--- a/include/asm-sh/smp.h
+++ b/include/asm-sh/smp.h
@@ -19,11 +19,6 @@
#include <asm/atomic.h>
#include <asm/current.h>
-extern cpumask_t cpu_online_map;
-extern cpumask_t cpu_possible_map;
-
-#define cpu_online(cpu) cpu_isset(cpu, cpu_online_map)
-
#define raw_smp_processor_id() (current_thread_info()->cpu)
/* I've no idea what the real meaning of this is */
diff --git a/include/asm-sh/snapgear/io.h b/include/asm-sh/snapgear.h
similarity index 62%
rename from include/asm-sh/snapgear/io.h
rename to include/asm-sh/snapgear.h
index bfa97ac..6b5e4dd 100644
--- a/include/asm-sh/snapgear/io.h
+++ b/include/asm-sh/snapgear.h
@@ -40,21 +40,8 @@
#define IRL3_PRIORITY 4
#endif
-extern unsigned char snapgear_inb(unsigned long port);
-extern unsigned short snapgear_inw(unsigned long port);
-extern unsigned int snapgear_inl(unsigned long port);
-
-extern void snapgear_outb(unsigned char value, unsigned long port);
-extern void snapgear_outw(unsigned short value, unsigned long port);
-extern void snapgear_outl(unsigned int value, unsigned long port);
-
-extern unsigned char snapgear_inb_p(unsigned long port);
-extern void snapgear_outb_p(unsigned char value, unsigned long port);
-
-extern void snapgear_insl(unsigned long port, void *addr, unsigned long count);
-extern void snapgear_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long snapgear_isa_port2addr(unsigned long offset);
+#define __IO_PREFIX snapgear
+#include <asm/io_generic.h>
#ifdef CONFIG_SH_SECUREEDGE5410
/*
@@ -79,14 +66,14 @@
* D12 - RTS RESET
*/
- #define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
- extern unsigned short secureedge5410_ioport;
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
- #define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
- (secureedge5410_ioport = \
- ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
- #define SECUREEDGE_READ_IOPORT() \
- ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+ (secureedge5410_ioport = \
+ ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+ ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
#endif
#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
index ad35ad4..6c1f8fd 100644
--- a/include/asm-sh/system.h
+++ b/include/asm-sh/system.h
@@ -6,6 +6,7 @@
* Copyright (C) 2002 Paul Mundt
*/
+#include <asm/types.h>
/*
* switch_to() should switch tasks to task nr n, first
@@ -66,13 +67,20 @@
{
}
-#define nop() __asm__ __volatile__ ("nop")
+#ifdef CONFIG_CPU_SH4A
+#define __icbi() \
+{ \
+ unsigned long __addr; \
+ __addr = 0xa8000000; \
+ __asm__ __volatile__( \
+ "icbi %0\n\t" \
+ : /* no output */ \
+ : "m" (__m(__addr))); \
+}
+#endif
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-static __inline__ unsigned long tas(volatile int *m)
-{ /* #define tas(ptr) (xchg((ptr),1)) */
+static inline unsigned long tas(volatile int *m)
+{
unsigned long retval;
__asm__ __volatile__ ("tas.b @%1\n\t"
@@ -81,12 +89,33 @@
return retval;
}
-extern void __xchg_called_with_bad_pointer(void);
-
-#define mb() __asm__ __volatile__ ("": : :"memory")
-#define rmb() mb()
-#define wmb() __asm__ __volatile__ ("": : :"memory")
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#ifdef CONFIG_CPU_SH4A
+#define mb() __asm__ __volatile__ ("synco": : :"memory")
+#define rmb() mb()
+#define wmb() __asm__ __volatile__ ("synco": : :"memory")
+#define ctrl_barrier() __icbi()
#define read_barrier_depends() do { } while(0)
+#else
+#define mb() __asm__ __volatile__ ("": : :"memory")
+#define rmb() mb()
+#define wmb() __asm__ __volatile__ ("": : :"memory")
+#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#define read_barrier_depends() do { } while(0)
+#endif
#ifdef CONFIG_SMP
#define smp_mb() mb()
@@ -103,7 +132,8 @@
#define set_mb(var, value) do { xchg(&var, value); } while (0)
/* Interrupt Control */
-static __inline__ void local_irq_enable(void)
+#ifdef CONFIG_CPU_HAS_SR_RB
+static inline void local_irq_enable(void)
{
unsigned long __dummy0, __dummy1;
@@ -116,8 +146,22 @@
: "1" (~0x000000f0)
: "memory");
}
+#else
+static inline void local_irq_enable(void)
+{
+ unsigned long __dummy0, __dummy1;
-static __inline__ void local_irq_disable(void)
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "and %1, %0\n\t"
+ "ldc %0, sr\n\t"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "1" (~0x000000f0)
+ : "memory");
+}
+#endif
+
+static inline void local_irq_disable(void)
{
unsigned long __dummy;
__asm__ __volatile__("stc sr, %0\n\t"
@@ -128,6 +172,31 @@
: "memory");
}
+static inline void set_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ ("stc sr, %0\n\t"
+ "or %2, %0\n\t"
+ "and %3, %0\n\t"
+ "ldc %0, sr"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "r" (0x10000000), "r" (0xffffff0f)
+ : "memory");
+}
+
+static inline void clear_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ ("stc sr, %0\n\t"
+ "and %2, %0\n\t"
+ "ldc %0, sr"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "1" (~0x10000000)
+ : "memory");
+}
+
#define local_save_flags(x) \
__asm__("stc sr, %0; and #0xf0, %0" : "=&z" (x) :/**/: "memory" )
@@ -138,7 +207,7 @@
(flags != 0); \
})
-static __inline__ unsigned long local_irq_save(void)
+static inline unsigned long local_irq_save(void)
{
unsigned long flags, __dummy;
@@ -154,35 +223,9 @@
return flags;
}
-#ifdef DEBUG_CLI_STI
-static __inline__ void local_irq_restore(unsigned long x)
-{
- if ((x & 0x000000f0) != 0x000000f0)
- local_irq_enable();
- else {
- unsigned long flags;
- local_save_flags(flags);
-
- if (flags == 0) {
- extern void dump_stack(void);
- printk(KERN_ERR "BUG!\n");
- dump_stack();
- local_irq_disable();
- }
- }
-}
-#else
-#define local_irq_restore(x) do { \
+#define local_irq_restore(x) do { \
if ((x & 0x000000f0) != 0x000000f0) \
- local_irq_enable(); \
-} while (0)
-#endif
-
-#define really_restore_flags(x) do { \
- if ((x & 0x000000f0) != 0x000000f0) \
- local_irq_enable(); \
- else \
- local_irq_disable(); \
+ local_irq_enable(); \
} while (0)
/*
@@ -210,8 +253,8 @@
#define back_to_P1() \
do { \
unsigned long __dummy; \
+ ctrl_barrier(); \
__asm__ __volatile__( \
- "nop;nop;nop;nop;nop;nop;nop\n\t" \
"mov.l 1f, %0\n\t" \
"jmp @%0\n\t" \
" nop\n\t" \
@@ -224,7 +267,7 @@
/* For spinlocks etc */
#define local_irq_save(x) x = local_irq_save()
-static __inline__ unsigned long xchg_u32(volatile int * m, unsigned long val)
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
{
unsigned long flags, retval;
@@ -235,7 +278,7 @@
return retval;
}
-static __inline__ unsigned long xchg_u8(volatile unsigned char * m, unsigned long val)
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
{
unsigned long flags, retval;
@@ -246,20 +289,70 @@
return retval;
}
-static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size) \
+({ \
+ unsigned long __xchg__res; \
+ volatile void *__xchg_ptr = (ptr); \
+ switch (size) { \
+ case 4: \
+ __xchg__res = xchg_u32(__xchg_ptr, x); \
+ break; \
+ case 1: \
+ __xchg__res = xchg_u8(__xchg_ptr, x); \
+ break; \
+ default: \
+ __xchg_called_with_bad_pointer(); \
+ __xchg__res = x; \
+ break; \
+ } \
+ \
+ __xchg__res; \
+})
+
+#define xchg(ptr,x) \
+ ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old,
+ unsigned long new)
+{
+ __u32 retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ if (retval == old)
+ *m = new;
+ local_irq_restore(flags); /* implies memory barrier */
+ return retval;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+ unsigned long new, int size)
{
switch (size) {
case 4:
- return xchg_u32(ptr, x);
- break;
- case 1:
- return xchg_u8(ptr, x);
- break;
+ return __cmpxchg_u32(ptr, old, new);
}
- __xchg_called_with_bad_pointer();
- return x;
+ __cmpxchg_called_with_bad_pointer();
+ return old;
}
+#define cmpxchg(ptr,o,n) \
+ ({ \
+ __typeof__(*(ptr)) _o_ = (o); \
+ __typeof__(*(ptr)) _n_ = (n); \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
+ (unsigned long)_n_, sizeof(*(ptr))); \
+ })
+
/* XXX
* disable hlt during certain critical i/o operations
*/
diff --git a/include/asm-sh/systemh/io.h b/include/asm-sh/systemh/io.h
deleted file mode 100644
index 327849b..0000000
--- a/include/asm-sh/systemh/io.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-sh/systemh/io.h
- *
- * Stupid I/O definitions for SystemH, cloned from SE7751.
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_SH_SYSTEMH_IO_H
-#define __ASM_SH_SYSTEMH_IO_H
-
-extern unsigned char sh7751systemh_inb(unsigned long port);
-extern unsigned short sh7751systemh_inw(unsigned long port);
-extern unsigned int sh7751systemh_inl(unsigned long port);
-
-extern void sh7751systemh_outb(unsigned char value, unsigned long port);
-extern void sh7751systemh_outw(unsigned short value, unsigned long port);
-extern void sh7751systemh_outl(unsigned int value, unsigned long port);
-
-extern unsigned char sh7751systemh_inb_p(unsigned long port);
-extern void sh7751systemh_outb_p(unsigned char value, unsigned long port);
-
-extern void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count);
-extern void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned char sh7751systemh_readb(unsigned long addr);
-extern unsigned short sh7751systemh_readw(unsigned long addr);
-extern unsigned int sh7751systemh_readl(unsigned long addr);
-extern void sh7751systemh_writeb(unsigned char b, unsigned long addr);
-extern void sh7751systemh_writew(unsigned short b, unsigned long addr);
-extern void sh7751systemh_writel(unsigned int b, unsigned long addr);
-
-extern unsigned long sh7751systemh_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_SYSTEMH_IO_H */
-
diff --git a/include/asm-sh/systemh/7751systemh.h b/include/asm-sh/systemh7751.h
similarity index 96%
rename from include/asm-sh/systemh/7751systemh.h
rename to include/asm-sh/systemh7751.h
index 4170531..b143bb2 100644
--- a/include/asm-sh/systemh/7751systemh.h
+++ b/include/asm-sh/systemh7751.h
@@ -65,4 +65,7 @@
#define IRQ_79C973 13
+#define __IO_PREFIX sh7751systemh
+#include <asm/io_generic.h>
+
#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h
index 7345350..3ebc3f9 100644
--- a/include/asm-sh/thread_info.h
+++ b/include/asm-sh/thread_info.h
@@ -9,8 +9,8 @@
* Copyright (C) 2002 David Howells (dhowells@redhat.com)
* - Incorporating suggestions made by Linus Torvalds and Dave Miller
*/
-
#ifdef __KERNEL__
+#include <asm/page.h>
#ifndef __ASSEMBLY__
#include <asm/processor.h>
@@ -21,7 +21,10 @@
unsigned long flags; /* low level flags */
__u32 cpu;
int preempt_count; /* 0 => preemptable, <0 => BUG */
+ mm_segment_t addr_limit; /* thread address space */
struct restart_block restart_block;
+ unsigned long previous_sp; /* sp of previous stack in case
+ of nested IRQ stacks */
__u8 supervisor_stack[0];
};
@@ -29,6 +32,13 @@
#define PREEMPT_ACTIVE 0x10000000
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE (PAGE_SIZE)
+#else
+#define THREAD_SIZE (PAGE_SIZE * 2)
+#endif
+#define STACK_WARN (THREAD_SIZE / 8)
+
/*
* macros/functions for gaining access to the thread information structure
*/
@@ -40,6 +50,7 @@
.flags = 0, \
.cpu = 0, \
.preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
.restart_block = { \
.fn = do_no_restart_syscall, \
}, \
@@ -48,24 +59,42 @@
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("r15") __attribute_used__;
+
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
+#ifdef CONFIG_CPU_HAS_SR_RB
__asm__("stc r7_bank, %0" : "=r" (ti));
+#else
+ unsigned long __dummy;
+
+ __asm__ __volatile__ (
+ "mov r15, %0\n\t"
+ "and %1, %0\n\t"
+ : "=&r" (ti), "=r" (__dummy)
+ : "1" (~(THREAD_SIZE - 1))
+ : "memory");
+#endif
+
return ti;
}
/* thread information allocation */
-#define THREAD_SIZE (2*PAGE_SIZE)
-#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(ti) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(ti) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+#define free_thread_info(ti) kfree(ti)
#else /* !__ASSEMBLY__ */
/* how to get the thread information struct from ASM */
#define GET_THREAD_INFO(reg) \
- stc r7_bank, reg
+ stc r7_bank, reg
#endif
@@ -79,18 +108,18 @@
#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
-#define TIF_USERSPACE 31 /* true if FS sets userspace */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_USERSPACE (1<<TIF_USERSPACE)
#define _TIF_WORK_MASK 0x000000FE /* work to do on interrupt/exception return */
#define _TIF_ALLWORK_MASK 0x000000FF /* work to do on any return to u-space */
diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h
index dd6579c..c7ab280 100644
--- a/include/asm-sh/timer.h
+++ b/include/asm-sh/timer.h
@@ -6,6 +6,8 @@
struct sys_timer_ops {
int (*init)(void);
+ int (*start)(void);
+ int (*stop)(void);
unsigned long (*get_offset)(void);
unsigned long (*get_frequency)(void);
};
diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h
new file mode 100644
index 0000000..270a4f4
--- /dev/null
+++ b/include/asm-sh/titan.h
@@ -0,0 +1,43 @@
+/*
+ * Platform defintions for Titan
+ */
+
+#ifndef _ASM_SH_TITAN_TITAN_H
+#define _ASM_SH_TITAN_TITAN_H
+
+#define __IO_PREFIX titan
+#include <asm/io_generic.h>
+
+/* IRQ assignments */
+#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */
+#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */
+#define TITAN_IRQ_MPCIA 8 /* mPCI A */
+#define TITAN_IRQ_MPCIB 11 /* mPCI B */
+#define TITAN_IRQ_USB 11 /* USB */
+
+/*
+ * The external interrupt lines, these take up ints 0 - 15 inclusive
+ * depending on the priority for the interrupt. In fact the priority
+ * is the interrupt :-)
+ */
+#define IRL0_IRQ 0
+#define IRL0_IPR_ADDR INTC_IPRD
+#define IRL0_IPR_POS 3
+#define IRL0_PRIORITY 8
+
+#define IRL1_IRQ 1
+#define IRL1_IPR_ADDR INTC_IPRD
+#define IRL1_IPR_POS 2
+#define IRL1_PRIORITY 8
+
+#define IRL2_IRQ 2
+#define IRL2_IPR_ADDR INTC_IPRD
+#define IRL2_IPR_POS 1
+#define IRL2_PRIORITY 8
+
+#define IRL3_IRQ 3
+#define IRL3_IPR_ADDR INTC_IPRD
+#define IRL3_IPR_POS 0
+#define IRL3_PRIORITY 8
+
+#endif
diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h
index 2cb01861e..5c49ed6 100644
--- a/include/asm-sh/uaccess.h
+++ b/include/asm-sh/uaccess.h
@@ -16,21 +16,9 @@
#include <linux/errno.h>
#include <linux/sched.h>
-/*
- * NOTE: Macro/functions in this file depends on threads_info.h implementation.
- * Assumes:
- * TI_FLAGS == 8
- * TIF_USERSPACE == 31
- * USER_ADDR_LIMIT == 0x80000000
- */
-
#define VERIFY_READ 0
#define VERIFY_WRITE 1
-typedef struct {
- unsigned int is_user_space;
-} mm_segment_t;
-
/*
* The fs value determines whether argument validity checking should be
* performed or not. If get_fs() == USER_DS, checking is performed, with
@@ -40,16 +28,18 @@
*/
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define segment_eq(a,b) ((a).is_user_space == (b).is_user_space)
-#define USER_ADDR_LIMIT 0x80000000
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
+#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-#define KERNEL_DS MAKE_MM_SEG(0)
-#define USER_DS MAKE_MM_SEG(1)
+#define segment_eq(a,b) ((a).seg == (b).seg)
#define get_ds() (KERNEL_DS)
#if !defined(CONFIG_MMU)
+/* NOMMU is always true */
+#define __addr_ok(addr) (1)
+
static inline mm_segment_t get_fs(void)
{
return USER_DS;
@@ -76,31 +66,11 @@
return ((addr >= memory_start) && ((addr + size) < memory_end));
}
#else /* CONFIG_MMU */
-static inline mm_segment_t get_fs(void)
-{
- return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE));
-}
+#define __addr_ok(addr) \
+ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-static inline void set_fs(mm_segment_t s)
-{
- unsigned long ti, flag;
- __asm__ __volatile__(
- "stc r7_bank, %0\n\t"
- "mov.l @(8,%0), %1\n\t"
- "shal %1\n\t"
- "cmp/pl %2\n\t"
- "rotcr %1\n\t"
- "mov.l %1, @(8,%0)"
- : "=&r" (ti), "=&r" (flag)
- : "r" (s.is_user_space)
- : "t");
-/****
- if (s.is_user_space)
- set_thread_flag(TIF_USERSPACE);
- else
- clear_thread_flag(TIF_USERSPACE);
-****/
-}
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
/*
* __access_ok: Check if address with size is OK or not.
@@ -108,7 +78,7 @@
* We do three checks:
* (1) is it user space?
* (2) addr + size --> carry?
- * (3) addr + size >= 0x80000000 (USER_ADDR_LIMIT)
+ * (3) addr + size >= 0x80000000 (PAGE_OFFSET)
*
* (1) (2) (3) | RESULT
* 0 0 0 | ok
@@ -201,6 +171,7 @@
__gu_err; \
})
+#ifdef CONFIG_MMU
#define __get_user_check(x,ptr,size) \
({ \
long __gu_err, __gu_val; \
@@ -290,6 +261,18 @@
: "r" (addr) \
: "t"); \
})
+#else /* CONFIG_MMU */
+#define __get_user_check(x,ptr,size) \
+({ \
+ long __gu_err, __gu_val; \
+ if (__access_ok((unsigned long)(ptr), (size))) { \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ } else \
+ __gu_err = -EFAULT; \
+ __gu_err; \
+})
+#endif
#define __get_user_asm(x, addr, err, insn) \
({ \
@@ -541,7 +524,7 @@
"3:\n\t"
"mov.l 4f, %1\n\t"
"jmp @%1\n\t"
- " mov %5, %0\n"
+ " mov #0, %0\n"
".balign 4\n"
"4: .long 2b\n"
".previous\n"
@@ -550,26 +533,20 @@
" .long 1b,3b\n"
".previous"
: "=z" (res), "=&r" (__dummy)
- : "0" (0), "r" (__s), "r" (__n), "i" (-EFAULT)
+ : "0" (0), "r" (__s), "r" (__n)
: "t");
return res;
}
static __inline__ long strnlen_user(const char __user *s, long n)
{
- if (!access_ok(VERIFY_READ, s, n))
+ if (!__addr_ok(s))
return 0;
else
return __strnlen_user(s, n);
}
-static __inline__ long strlen_user(const char __user *s)
-{
- if (!access_ok(VERIFY_READ, s, 0))
- return 0;
- else
- return __strnlen_user(s, ~0UL >> 1);
-}
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
/*
* The exception table consists of pairs of addresses: the first is the
diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h
index 76b5430..5d5e9f9 100644
--- a/include/asm-sh/unistd.h
+++ b/include/asm-sh/unistd.h
@@ -292,25 +292,51 @@
#define __NR_mq_getsetattr (__NR_mq_open+5)
#define __NR_kexec_load 283
#define __NR_waitid 284
-#define __NR_add_key 285
-#define __NR_request_key 286
-#define __NR_keyctl 287
-#define __NR_ioprio_set 288
-#define __NR_ioprio_get 289
-#define __NR_inotify_init 290
-#define __NR_inotify_add_watch 291
-#define __NR_inotify_rm_watch 292
+/* #define __NR_sys_setaltroot 285 */
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
+#define __NR_inotify_init 291
+#define __NR_inotify_add_watch 292
+#define __NR_inotify_rm_watch 293
+#define __NR_migrate_pages 294
+#define __NR_openat 295
+#define __NR_mkdirat 296
+#define __NR_mknodat 297
+#define __NR_fchownat 298
+#define __NR_futimesat 299
+#define __NR_newfstatat 300
+#define __NR_unlinkat 301
+#define __NR_renameat 302
+#define __NR_linkat 303
+#define __NR_symlinkat 304
+#define __NR_readlinkat 305
+#define __NR_fchmodat 306
+#define __NR_faccessat 307
+#define __NR_pselect6 308
+#define __NR_ppoll 309
+#define __NR_unshare 310
+#define __NR_set_robust_list 311
+#define __NR_get_robust_list 312
+#define __NR_splice 313
+#define __NR_sync_file_range 314
+#define __NR_tee 315
+#define __NR_vmsplice 316
-
-#define NR_syscalls 293
+#define NR_syscalls 317
#ifdef __KERNEL__
-/* user-visible error numbers are in the range -1 - -124: see <asm-sh/errno.h> */
+#include <linux/err.h>
+
+/* user-visible error numbers are in the range -1 - -MAX_ERRNO:
+ * see <asm-sh/errno.h> */
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-124)) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
/* Avoid using "res" which is declared to be in register r0; \
errno might expand to a function call and clobber it. */ \
int __err = -(res); \
@@ -444,6 +470,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#ifdef __KERNEL_SYSCALLS__
diff --git a/include/asm-sh/rts7751r2d/voyagergx_reg.h b/include/asm-sh/voyagergx.h
similarity index 98%
rename from include/asm-sh/rts7751r2d/voyagergx_reg.h
rename to include/asm-sh/voyagergx.h
index f031b5d..99b0807 100644
--- a/include/asm-sh/rts7751r2d/voyagergx_reg.h
+++ b/include/asm-sh/voyagergx.h
@@ -1,5 +1,5 @@
/* -------------------------------------------------------------------- */
-/* voyagergx_reg.h */
+/* voyagergx.h */
/* -------------------------------------------------------------------- */
/* This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/include/asm-sh/watchdog.h b/include/asm-sh/watchdog.h
index 09ca419..d19ea62 100644
--- a/include/asm-sh/watchdog.h
+++ b/include/asm-sh/watchdog.h
@@ -62,7 +62,6 @@
/**
* sh_wdt_read_cnt - Read from Counter
- *
* Reads back the WTCNT value.
*/
static inline __u8 sh_wdt_read_cnt(void)
@@ -72,7 +71,6 @@
/**
* sh_wdt_write_cnt - Write to Counter
- *
* @val: Value to write
*
* Writes the given value @val to the lower byte of the timer counter.
@@ -95,7 +93,6 @@
/**
* sh_wdt_write_csr - Write to Control/Status Register
- *
* @val: Value to write
*
* Writes the given value @val to the lower byte of the control/status
diff --git a/include/asm-sh64/unistd.h b/include/asm-sh64/unistd.h
index 9a1590f..c113566 100644
--- a/include/asm-sh64/unistd.h
+++ b/include/asm-sh64/unistd.h
@@ -347,8 +347,10 @@
#ifdef __KERNEL__
#define NR_syscalls 321
+#include <linux/err.h>
-/* user-visible error numbers are in the range -1 - -125: see <asm-sh64/errno.h> */
+/* user-visible error numbers are in the range -1 - -MAX_ERRNO:
+ * see <asm-sh64/errno.h> */
#define __syscall_return(type, res) \
do { \
@@ -358,7 +360,7 @@
** life easier in the system call epilogue (see entry.S) \
*/ \
register unsigned long __sr2 __asm__ ("r2") = res; \
- if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
errno = -(res); \
__sr2 = -1; \
} \
diff --git a/include/asm-um/alternative-asm.i b/include/asm-um/alternative-asm.i
new file mode 100644
index 0000000..cae9fac
--- /dev/null
+++ b/include/asm-um/alternative-asm.i
@@ -0,0 +1,6 @@
+#ifndef __UM_ALTERNATIVE_ASM_I
+#define __UM_ALTERNATIVE_ASM_I
+
+#include "asm/arch/alternative-asm.i"
+
+#endif
diff --git a/include/asm-um/frame.i b/include/asm-um/frame.i
new file mode 100644
index 0000000..09d5dca
--- /dev/null
+++ b/include/asm-um/frame.i
@@ -0,0 +1,6 @@
+#ifndef __UM_FRAME_I
+#define __UM_FRAME_I
+
+#include "asm/arch/frame.i"
+
+#endif
diff --git a/include/asm-um/processor-generic.h b/include/asm-um/processor-generic.h
index afa4fe1..d99bbdd 100644
--- a/include/asm-um/processor-generic.h
+++ b/include/asm-um/processor-generic.h
@@ -13,6 +13,7 @@
#include "asm/ptrace.h"
#include "choose-mode.h"
#include "registers.h"
+#include "sysdep/archsetjmp.h"
struct mm_struct;
@@ -43,8 +44,7 @@
#endif
#ifdef CONFIG_MODE_SKAS
struct {
- void *switch_buf;
- void *fork_buf;
+ jmp_buf switch_buf;
int mm_count;
} skas;
#endif
@@ -138,7 +138,7 @@
#ifdef CONFIG_MODE_SKAS
#define KSTK_REG(tsk, reg) \
- get_thread_reg(reg, tsk->thread.mode.skas.switch_buf)
+ get_thread_reg(reg, &tsk->thread.mode.skas.switch_buf)
#else
#define KSTK_REG(tsk, reg) (0xbadbabe)
#endif
diff --git a/include/asm-um/ptrace-x86_64.h b/include/asm-um/ptrace-x86_64.h
index 2074483..03b4af4 100644
--- a/include/asm-um/ptrace-x86_64.h
+++ b/include/asm-um/ptrace-x86_64.h
@@ -16,12 +16,15 @@
#define HOST_AUDIT_ARCH AUDIT_ARCH_X86_64
+/* Also defined in sysdep/ptrace.h, so may already be defined. */
+#ifndef FS_BASE
#define FS_BASE (21 * sizeof(unsigned long))
#define GS_BASE (22 * sizeof(unsigned long))
#define DS (23 * sizeof(unsigned long))
#define ES (24 * sizeof(unsigned long))
#define FS (25 * sizeof(unsigned long))
#define GS (26 * sizeof(unsigned long))
+#endif
#define PT_REGS_RBX(r) UPT_RBX(&(r)->regs)
#define PT_REGS_RCX(r) UPT_RCX(&(r)->regs)
diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h
index bcb44bf..552b7c8 100644
--- a/include/asm-v850/unistd.h
+++ b/include/asm-v850/unistd.h
@@ -238,12 +238,13 @@
#ifdef __KERNEL__
#include <asm/clinkage.h>
+#include <linux/err.h>
#define __syscall_return(type, res) \
do { \
- /* user-visible error numbers are in the range -1 - -124: \
+ /* user-visible error numbers are in the range -1 - -MAX_ERRNO: \
see <asm-v850/errno.h> */ \
- if (__builtin_expect ((unsigned long)(res) >= (unsigned long)(-125), 0)) { \
+ if (__builtin_expect ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO), 0)) { \
errno = -(res); \
res = -1; \
} \
diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h
index 2c95a31..ed59aa4 100644
--- a/include/asm-x86_64/acpi.h
+++ b/include/asm-x86_64/acpi.h
@@ -155,8 +155,6 @@
#endif /*CONFIG_ACPI_SLEEP*/
-#define boot_cpu_physical_apicid boot_cpu_id
-
extern int acpi_disabled;
extern int acpi_pci_disabled;
diff --git a/include/asm-x86_64/alternative-asm.i b/include/asm-x86_64/alternative-asm.i
new file mode 100644
index 0000000..e4041f4
--- /dev/null
+++ b/include/asm-x86_64/alternative-asm.i
@@ -0,0 +1,14 @@
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+ .macro LOCK_PREFIX
+1: lock
+ .section .smp_locks,"a"
+ .align 8
+ .quad 1b
+ .previous
+ .endm
+#else
+ .macro LOCK_PREFIX
+ .endm
+#endif
diff --git a/include/asm-x86_64/apic.h b/include/asm-x86_64/apic.h
index 9c96a0a..9e66d32 100644
--- a/include/asm-x86_64/apic.h
+++ b/include/asm-x86_64/apic.h
@@ -17,6 +17,8 @@
extern int apic_verbosity;
extern int apic_runs_main_timer;
+extern int ioapic_force;
+extern int apic_mapped;
/*
* Define the default level of output to be very little
@@ -29,8 +31,6 @@
printk(s, ##a); \
} while (0)
-#ifdef CONFIG_X86_LOCAL_APIC
-
struct pt_regs;
/*
@@ -95,17 +95,12 @@
#define K8_APIC_EXT_INT_MSG_EXT 0x7
#define K8_APIC_EXT_LVT_ENTRY_THRESHOLD 0
-extern int disable_timer_pin_1;
-
-
void smp_send_timer_broadcast_ipi(void);
void switch_APIC_timer_to_ipi(void *cpumask);
void switch_ipi_to_APIC_timer(void *cpumask);
#define ARCH_APICTIMER_STOPS_ON_C3 1
-#endif /* CONFIG_X86_LOCAL_APIC */
-
extern unsigned boot_cpu_id;
#endif /* __ASM_APIC_H */
diff --git a/include/asm-x86_64/bitops.h b/include/asm-x86_64/bitops.h
index f7ba57b..5b535ea 100644
--- a/include/asm-x86_64/bitops.h
+++ b/include/asm-x86_64/bitops.h
@@ -399,6 +399,8 @@
return r+1;
}
+#define ARCH_HAS_FAST_MULTIPLIER 1
+
#include <asm-generic/bitops/hweight.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-x86_64/calgary.h b/include/asm-x86_64/calgary.h
index 4e39195..6b93f5a 100644
--- a/include/asm-x86_64/calgary.h
+++ b/include/asm-x86_64/calgary.h
@@ -24,7 +24,6 @@
#ifndef _ASM_X86_64_CALGARY_H
#define _ASM_X86_64_CALGARY_H
-#include <linux/config.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
@@ -34,12 +33,12 @@
unsigned long it_base; /* mapped address of tce table */
unsigned long it_hint; /* Hint for next alloc */
unsigned long *it_map; /* A simple allocation bitmap for now */
+ void __iomem *bbar; /* Bridge BAR */
+ u64 tar_val; /* Table Address Register */
+ struct timer_list watchdog_timer;
spinlock_t it_lock; /* Protects it_map */
unsigned int it_size; /* Size of iommu table in entries */
unsigned char it_busno; /* Bus number this table belongs to */
- void __iomem *bbar;
- u64 tar_val;
- struct timer_list watchdog_timer;
};
#define TCE_TABLE_SIZE_UNSPECIFIED ~0
diff --git a/include/asm-x86_64/dwarf2.h b/include/asm-x86_64/dwarf2.h
index 0744db7..eedc085 100644
--- a/include/asm-x86_64/dwarf2.h
+++ b/include/asm-x86_64/dwarf2.h
@@ -13,7 +13,7 @@
away for older version.
*/
-#ifdef CONFIG_UNWIND_INFO
+#ifdef CONFIG_AS_CFI
#define CFI_STARTPROC .cfi_startproc
#define CFI_ENDPROC .cfi_endproc
@@ -28,6 +28,11 @@
#define CFI_REMEMBER_STATE .cfi_remember_state
#define CFI_RESTORE_STATE .cfi_restore_state
#define CFI_UNDEFINED .cfi_undefined
+#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
+#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#else
+#define CFI_SIGNAL_FRAME
+#endif
#else
@@ -45,6 +50,7 @@
#define CFI_REMEMBER_STATE #
#define CFI_RESTORE_STATE #
#define CFI_UNDEFINED #
+#define CFI_SIGNAL_FRAME #
#endif
diff --git a/include/asm-x86_64/e820.h b/include/asm-x86_64/e820.h
index f656748..fa20867 100644
--- a/include/asm-x86_64/e820.h
+++ b/include/asm-x86_64/e820.h
@@ -19,13 +19,9 @@
#define E820_RAM 1
#define E820_RESERVED 2
-#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */
+#define E820_ACPI 3
#define E820_NVS 4
-#define HIGH_MEMORY (1024*1024)
-
-#define LOWMEMSIZE() (0x9f000)
-
#ifndef __ASSEMBLY__
struct e820entry {
u64 addr; /* start of memory segment */
@@ -51,13 +47,11 @@
extern int e820_any_mapped(unsigned long start, unsigned long end, unsigned type);
extern int e820_all_mapped(unsigned long start, unsigned long end, unsigned type);
-extern void e820_bootmem_free(pg_data_t *pgdat, unsigned long start,unsigned long end);
extern void e820_setup_gap(void);
-extern unsigned long e820_hole_size(unsigned long start_pfn,
- unsigned long end_pfn);
+extern void e820_register_active_regions(int nid,
+ unsigned long start_pfn, unsigned long end_pfn);
-extern void __init parse_memopt(char *p, char **end);
-extern void __init parse_memmapopt(char *p, char **end);
+extern void finish_e820_parsing(void);
extern struct e820map e820;
diff --git a/include/asm-x86_64/fixmap.h b/include/asm-x86_64/fixmap.h
index 0b4ffbd..1b620db 100644
--- a/include/asm-x86_64/fixmap.h
+++ b/include/asm-x86_64/fixmap.h
@@ -37,13 +37,9 @@
VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
VSYSCALL_HPET,
FIX_HPET_BASE,
-#ifdef CONFIG_X86_LOCAL_APIC
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
-#endif
-#ifdef CONFIG_X86_IO_APIC
FIX_IO_APIC_BASE_0,
FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
-#endif
__end_of_fixed_addresses
};
diff --git a/include/asm-x86_64/genapic.h b/include/asm-x86_64/genapic.h
index 50b38e7..81e7146 100644
--- a/include/asm-x86_64/genapic.h
+++ b/include/asm-x86_64/genapic.h
@@ -16,7 +16,6 @@
char *name;
u32 int_delivery_mode;
u32 int_dest_mode;
- u32 int_delivery_dest; /* for quick IPIs */
int (*apic_id_registered)(void);
cpumask_t (*target_cpus)(void);
void (*init_apic_ldr)(void);
diff --git a/include/asm-x86_64/i387.h b/include/asm-x86_64/i387.h
index cba8a3b..0217b74 100644
--- a/include/asm-x86_64/i387.h
+++ b/include/asm-x86_64/i387.h
@@ -24,6 +24,7 @@
extern void mxcsr_feature_mask_init(void);
extern void init_fpu(struct task_struct *child);
extern int save_i387(struct _fpstate __user *buf);
+extern asmlinkage void math_state_restore(void);
/*
* FPU lazy state save handling...
@@ -31,7 +32,9 @@
#define unlazy_fpu(tsk) do { \
if (task_thread_info(tsk)->status & TS_USEDFPU) \
- save_init_fpu(tsk); \
+ save_init_fpu(tsk); \
+ else \
+ tsk->fpu_counter = 0; \
} while (0)
/* Ignore delayed exceptions from user space */
@@ -134,8 +137,8 @@
#else
: [fx] "cdaSDb" (fx), "0" (0));
#endif
- if (unlikely(err))
- __clear_user(fx, sizeof(struct i387_fxsave_struct));
+ if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
+ err = -EFAULT;
/* No need to clear here because the caller clears USED_MATH */
return err;
}
diff --git a/include/asm-x86_64/intel_arch_perfmon.h b/include/asm-x86_64/intel_arch_perfmon.h
index 59c3964..8633331 100644
--- a/include/asm-x86_64/intel_arch_perfmon.h
+++ b/include/asm-x86_64/intel_arch_perfmon.h
@@ -14,6 +14,18 @@
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL (0x3c)
#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK (0x00 << 8)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT (1 << 0)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX (0)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
+ (1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
+
+union cpuid10_eax {
+ struct {
+ unsigned int version_id:8;
+ unsigned int num_counters:8;
+ unsigned int bit_width:8;
+ unsigned int mask_length:8;
+ } split;
+ unsigned int full;
+};
#endif /* X86_64_INTEL_ARCH_PERFMON_H */
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
index fb7a090..5d1b5c6 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86_64/io_apic.h
@@ -10,8 +10,6 @@
* Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
*/
-#ifdef CONFIG_X86_IO_APIC
-
#ifdef CONFIG_PCI_MSI
static inline int use_pci_vector(void) {return 1;}
static inline void disable_edge_ioapic_vector(unsigned int vector) { }
@@ -209,10 +207,6 @@
extern int sis_apic_bug; /* dummy */
-#else /* !CONFIG_X86_IO_APIC */
-#define io_apic_assign_pci_irqs 0
-#endif
-
extern int assign_irq_vector(int irq);
void enable_NMI_through_LVT0 (void * dummy);
diff --git a/include/asm-x86_64/irq.h b/include/asm-x86_64/irq.h
index 9db5a1b..43469d8a 100644
--- a/include/asm-x86_64/irq.h
+++ b/include/asm-x86_64/irq.h
@@ -44,9 +44,7 @@
return ((irq == 2) ? 9 : irq);
}
-#ifdef CONFIG_X86_LOCAL_APIC
#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */
-#endif
#ifdef CONFIG_HOTPLUG_CPU
#include <linux/cpumask.h>
diff --git a/include/asm-x86_64/kexec.h b/include/asm-x86_64/kexec.h
index c564bae..5fab957 100644
--- a/include/asm-x86_64/kexec.h
+++ b/include/asm-x86_64/kexec.h
@@ -1,6 +1,27 @@
#ifndef _X86_64_KEXEC_H
#define _X86_64_KEXEC_H
+#define PA_CONTROL_PAGE 0
+#define VA_CONTROL_PAGE 1
+#define PA_PGD 2
+#define VA_PGD 3
+#define PA_PUD_0 4
+#define VA_PUD_0 5
+#define PA_PMD_0 6
+#define VA_PMD_0 7
+#define PA_PTE_0 8
+#define VA_PTE_0 9
+#define PA_PUD_1 10
+#define VA_PUD_1 11
+#define PA_PMD_1 12
+#define VA_PMD_1 13
+#define PA_PTE_1 14
+#define VA_PTE_1 15
+#define PA_TABLE_PAGE 16
+#define PAGES_NR 17
+
+#ifndef __ASSEMBLY__
+
#include <linux/string.h>
#include <asm/page.h>
@@ -64,4 +85,12 @@
newregs->rip = (unsigned long)current_text_addr();
}
}
+
+NORET_TYPE void
+relocate_kernel(unsigned long indirection_page,
+ unsigned long page_list,
+ unsigned long start_address) ATTRIB_NORET;
+
+#endif /* __ASSEMBLY__ */
+
#endif /* _X86_64_KEXEC_H */
diff --git a/include/asm-x86_64/linkage.h b/include/asm-x86_64/linkage.h
index 291c2d0..b5f39d0 100644
--- a/include/asm-x86_64/linkage.h
+++ b/include/asm-x86_64/linkage.h
@@ -1,6 +1,6 @@
#ifndef __ASM_LINKAGE_H
#define __ASM_LINKAGE_H
-/* Nothing to see here... */
+#define __ALIGN .p2align 4,,15
#endif
diff --git a/include/asm-x86_64/mach_apic.h b/include/asm-x86_64/mach_apic.h
index 0acea44..d334224 100644
--- a/include/asm-x86_64/mach_apic.h
+++ b/include/asm-x86_64/mach_apic.h
@@ -16,7 +16,6 @@
#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
#define INT_DEST_MODE (genapic->int_dest_mode)
-#define INT_DELIVERY_DEST (genapic->int_delivery_dest)
#define TARGET_CPUS (genapic->target_cpus())
#define apic_id_registered (genapic->apic_id_registered)
#define init_apic_ldr (genapic->init_apic_ldr)
diff --git a/include/asm-x86_64/mce.h b/include/asm-x86_64/mce.h
index d13687d..5a11146 100644
--- a/include/asm-x86_64/mce.h
+++ b/include/asm-x86_64/mce.h
@@ -99,6 +99,8 @@
}
#endif
+void mce_log_therm_throt_event(unsigned int cpu, __u64 status);
+
extern atomic_t mce_entry;
#endif
diff --git a/include/asm-x86_64/mmx.h b/include/asm-x86_64/mmx.h
deleted file mode 100644
index 46b71da..0000000
--- a/include/asm-x86_64/mmx.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _ASM_MMX_H
-#define _ASM_MMX_H
-
-/*
- * MMX 3Dnow! helper operations
- */
-
-#include <linux/types.h>
-
-extern void *_mmx_memcpy(void *to, const void *from, size_t size);
-extern void mmx_clear_page(void *page);
-extern void mmx_copy_page(void *to, void *from);
-
-#endif
diff --git a/include/asm-x86_64/mpspec.h b/include/asm-x86_64/mpspec.h
index 14fc3dd..017fddb 100644
--- a/include/asm-x86_64/mpspec.h
+++ b/include/asm-x86_64/mpspec.h
@@ -159,13 +159,7 @@
#define MAX_MP_BUSSES 256
/* Each PCI slot may be a combo card with its own bus. 4 IRQ pins per slot. */
#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
-enum mp_bustype {
- MP_BUS_ISA = 1,
- MP_BUS_EISA,
- MP_BUS_PCI,
- MP_BUS_MCA
-};
-extern unsigned char mp_bus_id_to_type [MAX_MP_BUSSES];
+extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
extern int mp_bus_id_to_pci_bus [MAX_MP_BUSSES];
extern unsigned int boot_cpu_physical_apicid;
@@ -178,18 +172,15 @@
extern struct mpc_config_intsrc mp_irqs [MAX_IRQ_SOURCES];
extern int mpc_default_type;
extern unsigned long mp_lapic_addr;
-extern int pic_mode;
#ifdef CONFIG_ACPI
extern void mp_register_lapic (u8 id, u8 enabled);
extern void mp_register_lapic_address (u64 address);
-#ifdef CONFIG_X86_IO_APIC
extern void mp_register_ioapic (u8 id, u32 address, u32 gsi_base);
extern void mp_override_legacy_irq (u8 bus_irq, u8 polarity, u8 trigger, u32 gsi);
extern void mp_config_acpi_legacy_irqs (void);
extern int mp_register_gsi (u32 gsi, int triggering, int polarity);
-#endif /*CONFIG_X86_IO_APIC*/
#endif
extern int using_apic_timer;
diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h
index 10f8b51..37e1941 100644
--- a/include/asm-x86_64/msr.h
+++ b/include/asm-x86_64/msr.h
@@ -66,14 +66,25 @@
#define rdtscl(low) \
__asm__ __volatile__ ("rdtsc" : "=a" (low) : : "edx")
+#define rdtscp(low,high,aux) \
+ asm volatile (".byte 0x0f,0x01,0xf9" : "=a" (low), "=d" (high), "=c" (aux))
+
#define rdtscll(val) do { \
unsigned int __a,__d; \
asm volatile("rdtsc" : "=a" (__a), "=d" (__d)); \
(val) = ((unsigned long)__a) | (((unsigned long)__d)<<32); \
} while(0)
+#define rdtscpll(val, aux) do { \
+ unsigned long __a, __d; \
+ asm volatile (".byte 0x0f,0x01,0xf9" : "=a" (__a), "=d" (__d), "=c" (aux)); \
+ (val) = (__d << 32) | __a; \
+} while (0)
+
#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
+#define write_rdtscp_aux(val) wrmsr(0xc0000103, val, 0)
+
#define rdpmc(counter,low,high) \
__asm__ __volatile__("rdpmc" \
: "=a" (low), "=d" (high) \
diff --git a/include/asm-x86_64/mutex.h b/include/asm-x86_64/mutex.h
index 06fab6d..16396b1 100644
--- a/include/asm-x86_64/mutex.h
+++ b/include/asm-x86_64/mutex.h
@@ -25,13 +25,9 @@
\
__asm__ __volatile__( \
LOCK_PREFIX " decl (%%rdi) \n" \
- " js 2f \n" \
- "1: \n" \
- \
- LOCK_SECTION_START("") \
- "2: call "#fail_fn" \n" \
- " jmp 1b \n" \
- LOCK_SECTION_END \
+ " jns 1f \n" \
+ " call "#fail_fn" \n" \
+ "1:" \
\
:"=D" (dummy) \
: "D" (v) \
@@ -75,13 +71,9 @@
\
__asm__ __volatile__( \
LOCK_PREFIX " incl (%%rdi) \n" \
- " jle 2f \n" \
- "1: \n" \
- \
- LOCK_SECTION_START("") \
- "2: call "#fail_fn" \n" \
- " jmp 1b \n" \
- LOCK_SECTION_END \
+ " jg 1f \n" \
+ " call "#fail_fn" \n" \
+ "1: " \
\
:"=D" (dummy) \
: "D" (v) \
diff --git a/include/asm-x86_64/nmi.h b/include/asm-x86_64/nmi.h
index efb45c8..cbf2669 100644
--- a/include/asm-x86_64/nmi.h
+++ b/include/asm-x86_64/nmi.h
@@ -7,24 +7,13 @@
#include <linux/pm.h>
#include <asm/io.h>
-struct pt_regs;
-
-typedef int (*nmi_callback_t)(struct pt_regs * regs, int cpu);
-
/**
- * set_nmi_callback
+ * do_nmi_callback
*
- * Set a handler for an NMI. Only one handler may be
- * set. Return 1 if the NMI was handled.
+ * Check to see if a callback exists and execute it. Return 1
+ * if the handler exists and was handled successfully.
*/
-void set_nmi_callback(nmi_callback_t callback);
-
-/**
- * unset_nmi_callback
- *
- * Remove the handler previously set.
- */
-void unset_nmi_callback(void);
+int do_nmi_callback(struct pt_regs *regs, int cpu);
#ifdef CONFIG_PM
@@ -48,25 +37,32 @@
#endif /* CONFIG_PM */
extern void default_do_nmi(struct pt_regs *);
-extern void die_nmi(char *str, struct pt_regs *regs);
+extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
#define get_nmi_reason() inb(0x61)
extern int panic_on_timeout;
extern int unknown_nmi_panic;
+extern int nmi_watchdog_enabled;
extern int check_nmi_watchdog(void);
-
-extern void setup_apic_nmi_watchdog (void);
-extern int reserve_lapic_nmi(void);
-extern void release_lapic_nmi(void);
+extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
+extern int avail_to_resrv_perfctr_nmi(unsigned int);
+extern int reserve_perfctr_nmi(unsigned int);
+extern void release_perfctr_nmi(unsigned int);
+extern int reserve_evntsel_nmi(unsigned int);
+extern void release_evntsel_nmi(unsigned int);
+
+extern void setup_apic_nmi_watchdog (void *);
+extern void stop_apic_nmi_watchdog (void *);
extern void disable_timer_nmi_watchdog(void);
extern void enable_timer_nmi_watchdog(void);
-extern void nmi_watchdog_tick (struct pt_regs * regs, unsigned reason);
+extern int nmi_watchdog_tick (struct pt_regs * regs, unsigned reason);
extern void nmi_watchdog_default(void);
extern int setup_nmi_watchdog(char *);
+extern atomic_t nmi_active;
extern unsigned int nmi_watchdog;
#define NMI_DEFAULT -1
#define NMI_NONE 0
diff --git a/include/asm-x86_64/pci-direct.h b/include/asm-x86_64/pci-direct.h
index 036b6ca..eba9cb4 100644
--- a/include/asm-x86_64/pci-direct.h
+++ b/include/asm-x86_64/pci-direct.h
@@ -2,47 +2,15 @@
#define ASM_PCI_DIRECT_H 1
#include <linux/types.h>
-#include <asm/io.h>
/* Direct PCI access. This is used for PCI accesses in early boot before
the PCI subsystem works. */
-#define PDprintk(x...)
+extern u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset);
+extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
+extern u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset);
+extern void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val);
-static inline u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
-{
- u32 v;
- outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
- v = inl(0xcfc);
- if (v != 0xffffffff)
- PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
- return v;
-}
-
-static inline u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
-{
- u8 v;
- outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
- v = inb(0xcfc + (offset&3));
- PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
- return v;
-}
-
-static inline u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
-{
- u16 v;
- outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
- v = inw(0xcfc + (offset&2));
- PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
- return v;
-}
-
-static inline void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
- u32 val)
-{
- PDprintk("%x writing to %x: %x\n", slot, offset, val);
- outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
- outl(val, 0xcfc);
-}
+extern int early_pci_allowed(void);
#endif
diff --git a/include/asm-x86_64/pda.h b/include/asm-x86_64/pda.h
index b47c3df..14996d9 100644
--- a/include/asm-x86_64/pda.h
+++ b/include/asm-x86_64/pda.h
@@ -9,20 +9,24 @@
/* Per processor datastructure. %gs points to it while the kernel runs */
struct x8664_pda {
- struct task_struct *pcurrent; /* Current process */
- unsigned long data_offset; /* Per cpu data offset from linker address */
- unsigned long kernelstack; /* top of kernel stack for current */
- unsigned long oldrsp; /* user rsp for system call */
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
- unsigned long debugstack; /* #DB/#BP stack. */
+ struct task_struct *pcurrent; /* 0 Current process */
+ unsigned long data_offset; /* 8 Per cpu data offset from linker
+ address */
+ unsigned long kernelstack; /* 16 top of kernel stack for current */
+ unsigned long oldrsp; /* 24 user rsp for system call */
+ int irqcount; /* 32 Irq nesting counter. Starts with -1 */
+ int cpunumber; /* 36 Logical CPU number */
+#ifdef CONFIG_CC_STACKPROTECTOR
+ unsigned long stack_canary; /* 40 stack canary value */
+ /* gcc-ABI: this canary MUST be at
+ offset 40!!! */
#endif
- int irqcount; /* Irq nesting counter. Starts with -1 */
- int cpunumber; /* Logical CPU number */
- char *irqstackptr; /* top of irqstack */
+ char *irqstackptr;
int nodenumber; /* number of current node */
unsigned int __softirq_pending;
unsigned int __nmi_count; /* number of NMI on this CPUs */
- int mmu_state;
+ short mmu_state;
+ short isidle;
struct mm_struct *active_mm;
unsigned apic_timer_irqs;
} ____cacheline_aligned_in_smp;
@@ -36,44 +40,69 @@
* There is no fast way to get the base address of the PDA, all the accesses
* have to mention %fs/%gs. So it needs to be done this Torvaldian way.
*/
-#define sizeof_field(type,field) (sizeof(((type *)0)->field))
-#define typeof_field(type,field) typeof(((type *)0)->field)
+extern void __bad_pda_field(void) __attribute__((noreturn));
-extern void __bad_pda_field(void);
+/*
+ * proxy_pda doesn't actually exist, but tell gcc it is accessed for
+ * all PDA accesses so it gets read/write dependencies right.
+ */
+extern struct x8664_pda _proxy_pda;
#define pda_offset(field) offsetof(struct x8664_pda, field)
-#define pda_to_op(op,field,val) do { \
- typedef typeof_field(struct x8664_pda, field) T__; \
- switch (sizeof_field(struct x8664_pda, field)) { \
-case 2: \
-asm volatile(op "w %0,%%gs:%P1"::"ri" ((T__)val),"i"(pda_offset(field)):"memory"); break; \
-case 4: \
-asm volatile(op "l %0,%%gs:%P1"::"ri" ((T__)val),"i"(pda_offset(field)):"memory"); break; \
-case 8: \
-asm volatile(op "q %0,%%gs:%P1"::"ri" ((T__)val),"i"(pda_offset(field)):"memory"); break; \
- default: __bad_pda_field(); \
- } \
+#define pda_to_op(op,field,val) do { \
+ typedef typeof(_proxy_pda.field) T__; \
+ if (0) { T__ tmp__; tmp__ = (val); } /* type checking */ \
+ switch (sizeof(_proxy_pda.field)) { \
+ case 2: \
+ asm(op "w %1,%%gs:%c2" : \
+ "+m" (_proxy_pda.field) : \
+ "ri" ((T__)val), \
+ "i"(pda_offset(field))); \
+ break; \
+ case 4: \
+ asm(op "l %1,%%gs:%c2" : \
+ "+m" (_proxy_pda.field) : \
+ "ri" ((T__)val), \
+ "i" (pda_offset(field))); \
+ break; \
+ case 8: \
+ asm(op "q %1,%%gs:%c2": \
+ "+m" (_proxy_pda.field) : \
+ "ri" ((T__)val), \
+ "i"(pda_offset(field))); \
+ break; \
+ default: \
+ __bad_pda_field(); \
+ } \
} while (0)
-/*
- * AK: PDA read accesses should be neither volatile nor have an memory clobber.
- * Unfortunately removing them causes all hell to break lose currently.
- */
-#define pda_from_op(op,field) ({ \
- typeof_field(struct x8664_pda, field) ret__; \
- switch (sizeof_field(struct x8664_pda, field)) { \
-case 2: \
-asm volatile(op "w %%gs:%P1,%0":"=r" (ret__):"i"(pda_offset(field)):"memory"); break;\
-case 4: \
-asm volatile(op "l %%gs:%P1,%0":"=r" (ret__):"i"(pda_offset(field)):"memory"); break;\
-case 8: \
-asm volatile(op "q %%gs:%P1,%0":"=r" (ret__):"i"(pda_offset(field)):"memory"); break;\
- default: __bad_pda_field(); \
- } \
+#define pda_from_op(op,field) ({ \
+ typeof(_proxy_pda.field) ret__; \
+ switch (sizeof(_proxy_pda.field)) { \
+ case 2: \
+ asm(op "w %%gs:%c1,%0" : \
+ "=r" (ret__) : \
+ "i" (pda_offset(field)), \
+ "m" (_proxy_pda.field)); \
+ break; \
+ case 4: \
+ asm(op "l %%gs:%c1,%0": \
+ "=r" (ret__): \
+ "i" (pda_offset(field)), \
+ "m" (_proxy_pda.field)); \
+ break; \
+ case 8: \
+ asm(op "q %%gs:%c1,%0": \
+ "=r" (ret__) : \
+ "i" (pda_offset(field)), \
+ "m" (_proxy_pda.field)); \
+ break; \
+ default: \
+ __bad_pda_field(); \
+ } \
ret__; })
-
#define read_pda(field) pda_from_op("mov",field)
#define write_pda(field,val) pda_to_op("mov",field,val)
#define add_pda(field,val) pda_to_op("add",field,val)
diff --git a/include/asm-x86_64/percpu.h b/include/asm-x86_64/percpu.h
index bffb2f8..2857560 100644
--- a/include/asm-x86_64/percpu.h
+++ b/include/asm-x86_64/percpu.h
@@ -11,6 +11,16 @@
#include <asm/pda.h>
+#ifdef CONFIG_MODULES
+# define PERCPU_MODULE_RESERVE 8192
+#else
+# define PERCPU_MODULE_RESERVE 0
+#endif
+
+#define PERCPU_ENOUGH_ROOM \
+ (ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) + \
+ PERCPU_MODULE_RESERVE)
+
#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
#define __my_cpu_offset() read_pda(data_offset)
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
index 51eba23..6899e77 100644
--- a/include/asm-x86_64/pgtable.h
+++ b/include/asm-x86_64/pgtable.h
@@ -21,12 +21,9 @@
#define swapper_pg_dir init_level4_pgt
-extern int nonx_setup(char *str);
extern void paging_init(void);
extern void clear_kernel_mapping(unsigned long addr, unsigned long size);
-extern unsigned long pgkern_mask;
-
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
@@ -265,7 +262,7 @@
#define __LARGE_PTE (_PAGE_PSE|_PAGE_PRESENT)
static inline int pte_user(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
-static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_exec(pte_t pte) { return !(pte_val(pte) & _PAGE_NX); }
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
@@ -278,11 +275,12 @@
static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW)); return pte; }
static inline pte_t pte_mkread(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
-static inline pte_t pte_mkexec(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; }
+static inline pte_t pte_mkexec(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_NX)); return pte; }
static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); return pte; }
static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_PSE)); return pte; }
+static inline pte_t pte_clrhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_PSE)); return pte; }
struct vm_area_struct;
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index 038fe1f4..c28fc2d 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -24,8 +24,6 @@
#define mtrr_bp_init() do {} while (0)
#endif
extern void init_memory_mapping(unsigned long start, unsigned long end);
-extern void size_zones(unsigned long *z, unsigned long *h,
- unsigned long start_pfn, unsigned long end_pfn);
extern void system_call(void);
extern int kernel_syscall(void);
@@ -51,10 +49,8 @@
extern int sysctl_vsyscall;
extern int nohpet;
extern unsigned long vxtime_hz;
+extern void time_init_gtod(void);
-extern int numa_setup(char *opt);
-
-extern int setup_early_printk(char *);
extern void early_printk(const char *fmt, ...) __attribute__((format(printf,1,2)));
extern void early_identify_cpu(struct cpuinfo_x86 *c);
@@ -91,7 +87,7 @@
extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end);
-extern void check_ioapic(void);
+extern void early_quirks(void);
extern void check_efer(void);
extern int unhandled_signal(struct task_struct *tsk, int sig);
@@ -103,13 +99,7 @@
extern unsigned long table_start, table_end;
extern int exception_trace;
-extern int using_apic_timer;
-extern int disable_apic;
extern unsigned cpu_khz;
-extern int ioapic_force;
-extern int skip_ioapic_setup;
-extern int acpi_ht;
-extern int acpi_disabled;
extern void no_iommu_init(void);
extern int force_iommu, no_iommu;
@@ -131,7 +121,8 @@
extern int reboot_force;
extern int notsc_setup(char *);
-extern int setup_additional_cpus(char *);
+
+extern int gsi_irq_sharing(int gsi);
extern void smp_local_timer_interrupt(struct pt_regs * regs);
diff --git a/include/asm-x86_64/rwlock.h b/include/asm-x86_64/rwlock.h
index dea0e94..72aeebe 100644
--- a/include/asm-x86_64/rwlock.h
+++ b/include/asm-x86_64/rwlock.h
@@ -18,69 +18,9 @@
#ifndef _ASM_X86_64_RWLOCK_H
#define _ASM_X86_64_RWLOCK_H
-#include <linux/stringify.h>
-
#define RW_LOCK_BIAS 0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
+#define RW_LOCK_BIAS_STR "0x01000000"
-#define __build_read_lock_ptr(rw, helper) \
- asm volatile(LOCK_PREFIX "subl $1,(%0)\n\t" \
- "js 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tcall " helper "\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- ::"a" (rw) : "memory")
-
-#define __build_read_lock_const(rw, helper) \
- asm volatile(LOCK_PREFIX "subl $1,%0\n\t" \
- "js 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tpushq %%rax\n\t" \
- "leaq %0,%%rax\n\t" \
- "call " helper "\n\t" \
- "popq %%rax\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- :"=m" (*((volatile int *)rw))::"memory")
-
-#define __build_read_lock(rw, helper) do { \
- if (__builtin_constant_p(rw)) \
- __build_read_lock_const(rw, helper); \
- else \
- __build_read_lock_ptr(rw, helper); \
- } while (0)
-
-#define __build_write_lock_ptr(rw, helper) \
- asm volatile(LOCK_PREFIX "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
- "jnz 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tcall " helper "\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- ::"a" (rw) : "memory")
-
-#define __build_write_lock_const(rw, helper) \
- asm volatile(LOCK_PREFIX "subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
- "jnz 2f\n" \
- "1:\n" \
- LOCK_SECTION_START("") \
- "2:\tpushq %%rax\n\t" \
- "leaq %0,%%rax\n\t" \
- "call " helper "\n\t" \
- "popq %%rax\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END \
- :"=m" (*((volatile long *)rw))::"memory")
-
-#define __build_write_lock(rw, helper) do { \
- if (__builtin_constant_p(rw)) \
- __build_write_lock_const(rw, helper); \
- else \
- __build_write_lock_ptr(rw, helper); \
- } while (0)
+/* Actual code is in asm/spinlock.h or in arch/x86_64/lib/rwlock.S */
#endif
diff --git a/include/asm-x86_64/segment.h b/include/asm-x86_64/segment.h
index d4bed33..334ddcd 100644
--- a/include/asm-x86_64/segment.h
+++ b/include/asm-x86_64/segment.h
@@ -20,15 +20,16 @@
#define __USER_CS 0x33 /* 6*8+3 */
#define __USER32_DS __USER_DS
-#define GDT_ENTRY_TLS 1
#define GDT_ENTRY_TSS 8 /* needs two entries */
#define GDT_ENTRY_LDT 10 /* needs two entries */
#define GDT_ENTRY_TLS_MIN 12
#define GDT_ENTRY_TLS_MAX 14
-/* 15 free */
#define GDT_ENTRY_TLS_ENTRIES 3
+#define GDT_ENTRY_PER_CPU 15 /* Abused to load per CPU data from limit */
+#define __PER_CPU_SEG (GDT_ENTRY_PER_CPU * 8 + 3)
+
/* TLS indexes for 64bit - hardcoded in arch_prctl */
#define FS_TLS 0
#define GS_TLS 1
diff --git a/include/asm-x86_64/semaphore.h b/include/asm-x86_64/semaphore.h
index 064df08..107bd90 100644
--- a/include/asm-x86_64/semaphore.h
+++ b/include/asm-x86_64/semaphore.h
@@ -107,12 +107,9 @@
__asm__ __volatile__(
"# atomic down operation\n\t"
LOCK_PREFIX "decl %0\n\t" /* --sem->count */
- "js 2f\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __down_failed\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
+ "jns 1f\n\t"
+ "call __down_failed\n"
+ "1:"
:"=m" (sem->count)
:"D" (sem)
:"memory");
@@ -130,14 +127,11 @@
__asm__ __volatile__(
"# atomic interruptible down operation\n\t"
+ "xorl %0,%0\n\t"
LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "js 2f\n\t"
- "xorl %0,%0\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __down_failed_interruptible\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
+ "jns 2f\n\t"
+ "call __down_failed_interruptible\n"
+ "2:\n"
:"=a" (result), "=m" (sem->count)
:"D" (sem)
:"memory");
@@ -154,14 +148,11 @@
__asm__ __volatile__(
"# atomic interruptible down operation\n\t"
+ "xorl %0,%0\n\t"
LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "js 2f\n\t"
- "xorl %0,%0\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __down_failed_trylock\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
+ "jns 2f\n\t"
+ "call __down_failed_trylock\n\t"
+ "2:\n"
:"=a" (result), "=m" (sem->count)
:"D" (sem)
:"memory","cc");
@@ -179,12 +170,9 @@
__asm__ __volatile__(
"# atomic up operation\n\t"
LOCK_PREFIX "incl %0\n\t" /* ++sem->count */
- "jle 2f\n"
- "1:\n"
- LOCK_SECTION_START("")
- "2:\tcall __up_wakeup\n\t"
- "jmp 1b\n"
- LOCK_SECTION_END
+ "jg 1f\n\t"
+ "call __up_wakeup\n"
+ "1:"
:"=m" (sem->count)
:"D" (sem)
:"memory");
diff --git a/include/asm-x86_64/signal.h b/include/asm-x86_64/signal.h
index 3ede2a6..4581f97 100644
--- a/include/asm-x86_64/signal.h
+++ b/include/asm-x86_64/signal.h
@@ -24,10 +24,6 @@
} sigset_t;
-struct pt_regs;
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
-
#else
/* Here we must cater to libcs that poke about in kernel headers. */
diff --git a/include/asm-x86_64/smp.h b/include/asm-x86_64/smp.h
index ce97f65..d6b7c05 100644
--- a/include/asm-x86_64/smp.h
+++ b/include/asm-x86_64/smp.h
@@ -4,27 +4,18 @@
/*
* We need the APIC definitions automatically as part of 'smp.h'
*/
-#ifndef __ASSEMBLY__
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/bitops.h>
extern int disable_apic;
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-#ifndef __ASSEMBLY__
#include <asm/fixmap.h>
#include <asm/mpspec.h>
-#ifdef CONFIG_X86_IO_APIC
#include <asm/io_apic.h>
-#endif
#include <asm/apic.h>
#include <asm/thread_info.h>
-#endif
-#endif
#ifdef CONFIG_SMP
-#ifndef ASSEMBLY
#include <asm/pda.h>
@@ -42,7 +33,6 @@
extern void smp_alloc_memory(void);
extern volatile unsigned long smp_invalidate_needed;
-extern int pic_mode;
extern void lock_ipi_call_lock(void);
extern void unlock_ipi_call_lock(void);
extern int smp_num_siblings;
@@ -74,20 +64,16 @@
return GET_APIC_ID(*(unsigned int *)(APIC_BASE+APIC_ID));
}
-extern int safe_smp_processor_id(void);
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
extern void prefill_possible_map(void);
extern unsigned num_processors;
extern unsigned disabled_cpus;
-#endif /* !ASSEMBLY */
-
#define NO_PROC_ID 0xFF /* No processor magic marker */
#endif
-#ifndef ASSEMBLY
/*
* Some lowlevel functions might want to know about
* the real APIC ID <-> CPU # mapping.
@@ -109,11 +95,8 @@
return BAD_APICID;
}
-#endif /* !ASSEMBLY */
-
#ifndef CONFIG_SMP
#define stack_smp_processor_id() 0
-#define safe_smp_processor_id() 0
#define cpu_logical_map(x) (x)
#else
#include <asm/thread_info.h>
@@ -125,19 +108,23 @@
})
#endif
-#ifndef __ASSEMBLY__
static __inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_LOGICAL_ID(*(unsigned long *)(APIC_BASE+APIC_LDR));
}
-#endif
#ifdef CONFIG_SMP
#define cpu_physical_id(cpu) x86_cpu_to_apicid[cpu]
#else
#define cpu_physical_id(cpu) boot_cpu_id
-#endif
-
+static inline int smp_call_function_single(int cpuid, void (*func) (void *info),
+ void *info, int retry, int wait)
+{
+ /* Disable interrupts here? */
+ func(info);
+ return 0;
+}
+#endif /* !CONFIG_SMP */
#endif
diff --git a/include/asm-x86_64/spinlock.h b/include/asm-x86_64/spinlock.h
index 248a79f..3daf5b0 100644
--- a/include/asm-x86_64/spinlock.h
+++ b/include/asm-x86_64/spinlock.h
@@ -4,6 +4,7 @@
#include <asm/atomic.h>
#include <asm/rwlock.h>
#include <asm/page.h>
+#include <asm/processor.h>
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
@@ -16,31 +17,23 @@
* (the type definitions are in asm/spinlock_types.h)
*/
-#define __raw_spin_is_locked(x) \
- (*(volatile signed int *)(&(x)->slock) <= 0)
-
-#define __raw_spin_lock_string \
- "\n1:\t" \
- LOCK_PREFIX " ; decl %0\n\t" \
- "js 2f\n" \
- LOCK_SECTION_START("") \
- "2:\t" \
- "rep;nop\n\t" \
- "cmpl $0,%0\n\t" \
- "jle 2b\n\t" \
- "jmp 1b\n" \
- LOCK_SECTION_END
-
-#define __raw_spin_lock_string_up \
- "\n\tdecl %0"
-
-#define __raw_spin_unlock_string \
- "movl $1,%0" \
- :"=m" (lock->slock) : : "memory"
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+ return *(volatile signed int *)(&(lock)->slock) <= 0;
+}
static inline void __raw_spin_lock(raw_spinlock_t *lock)
{
- asm volatile(__raw_spin_lock_string : "=m" (lock->slock) : : "memory");
+ asm volatile(
+ "\n1:\t"
+ LOCK_PREFIX " ; decl %0\n\t"
+ "jns 2f\n"
+ "3:\n"
+ "rep;nop\n\t"
+ "cmpl $0,%0\n\t"
+ "jle 3b\n\t"
+ "jmp 1b\n"
+ "2:\t" : "=m" (lock->slock) : : "memory");
}
#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
@@ -49,7 +42,7 @@
{
int oldval;
- __asm__ __volatile__(
+ asm volatile(
"xchgl %0,%1"
:"=q" (oldval), "=m" (lock->slock)
:"0" (0) : "memory");
@@ -59,13 +52,14 @@
static inline void __raw_spin_unlock(raw_spinlock_t *lock)
{
- __asm__ __volatile__(
- __raw_spin_unlock_string
- );
+ asm volatile("movl $1,%0" :"=m" (lock->slock) :: "memory");
}
-#define __raw_spin_unlock_wait(lock) \
- do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+ while (__raw_spin_is_locked(lock))
+ cpu_relax();
+}
/*
* Read-write spinlocks, allowing multiple readers
@@ -79,26 +73,34 @@
*
* On x86, we implement read-write locks as a 32-bit counter
* with the high bit (sign) being the "contended" bit.
- *
- * The inline assembly is non-obvious. Think about it.
- *
- * Changed to use the same technique as rw semaphores. See
- * semaphore.h for details. -ben
- *
- * the helpers are in arch/i386/kernel/semaphore.c
*/
-#define __raw_read_can_lock(x) ((int)(x)->lock > 0)
-#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+static inline int __raw_read_can_lock(raw_rwlock_t *lock)
+{
+ return (int)(lock)->lock > 0;
+}
+
+static inline int __raw_write_can_lock(raw_rwlock_t *lock)
+{
+ return (lock)->lock == RW_LOCK_BIAS;
+}
static inline void __raw_read_lock(raw_rwlock_t *rw)
{
- __build_read_lock(rw, "__read_lock_failed");
+ asm volatile(LOCK_PREFIX "subl $1,(%0)\n\t"
+ "jns 1f\n"
+ "call __read_lock_failed\n"
+ "1:\n"
+ ::"D" (rw), "i" (RW_LOCK_BIAS) : "memory");
}
static inline void __raw_write_lock(raw_rwlock_t *rw)
{
- __build_write_lock(rw, "__write_lock_failed");
+ asm volatile(LOCK_PREFIX "subl %1,(%0)\n\t"
+ "jz 1f\n"
+ "\tcall __write_lock_failed\n\t"
+ "1:\n"
+ ::"D" (rw), "i" (RW_LOCK_BIAS) : "memory");
}
static inline int __raw_read_trylock(raw_rwlock_t *lock)
diff --git a/include/asm-x86_64/stacktrace.h b/include/asm-x86_64/stacktrace.h
new file mode 100644
index 0000000..5eb9799
--- /dev/null
+++ b/include/asm-x86_64/stacktrace.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_STACKTRACE_H
+#define _ASM_STACKTRACE_H 1
+
+/* Generic stack tracer with callbacks */
+
+struct stacktrace_ops {
+ void (*warning)(void *data, char *msg);
+ /* msg must contain %s for the symbol */
+ void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
+ void (*address)(void *data, unsigned long address);
+ /* On negative return stop dumping */
+ int (*stack)(void *data, char *name);
+};
+
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack,
+ struct stacktrace_ops *ops, void *data);
+
+#endif
diff --git a/include/asm-x86_64/system.h b/include/asm-x86_64/system.h
index 6bf170b..bd376bc 100644
--- a/include/asm-x86_64/system.h
+++ b/include/asm-x86_64/system.h
@@ -14,12 +14,13 @@
#define __RESTORE(reg,offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t"
/* frame pointer must be last for get_wchan */
-#define SAVE_CONTEXT "pushq %%rbp ; movq %%rsi,%%rbp\n\t"
-#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp\n\t"
+#define SAVE_CONTEXT "pushf ; pushq %%rbp ; movq %%rsi,%%rbp\n\t"
+#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp ; popf\t"
#define __EXTRA_CLOBBER \
,"rcx","rbx","rdx","r8","r9","r10","r11","r12","r13","r14","r15"
+/* Save restore flags to clear handle leaking NT */
#define switch_to(prev,next,last) \
asm volatile(SAVE_CONTEXT \
"movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */ \
diff --git a/include/asm-x86_64/tce.h b/include/asm-x86_64/tce.h
index 53e9a68..dbb047f 100644
--- a/include/asm-x86_64/tce.h
+++ b/include/asm-x86_64/tce.h
@@ -24,7 +24,6 @@
#ifndef _ASM_X86_64_TCE_H
#define _ASM_X86_64_TCE_H
-extern void* tce_table_kva[];
extern unsigned int specified_table_size;
struct iommu_table;
diff --git a/include/asm-x86_64/therm_throt.h b/include/asm-x86_64/therm_throt.h
new file mode 100644
index 0000000..5aac059
--- /dev/null
+++ b/include/asm-x86_64/therm_throt.h
@@ -0,0 +1 @@
+#include <asm-i386/therm_throt.h>
diff --git a/include/asm-x86_64/thread_info.h b/include/asm-x86_64/thread_info.h
index 2029b00..787a081 100644
--- a/include/asm-x86_64/thread_info.h
+++ b/include/asm-x86_64/thread_info.h
@@ -114,11 +114,14 @@
#define TIF_IRET 5 /* force IRET */
#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */
#define TIF_SECCOMP 8 /* secure computing */
+#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */
/* 16 free */
#define TIF_IA32 17 /* 32bit process */
#define TIF_FORK 18 /* ret_from_fork */
#define TIF_ABI_PENDING 19
#define TIF_MEMDIE 20
+#define TIF_DEBUG 21 /* uses debug registers */
+#define TIF_IO_BITMAP 22 /* uses I/O bitmap */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
@@ -128,9 +131,12 @@
#define _TIF_IRET (1<<TIF_IRET)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_IA32 (1<<TIF_IA32)
#define _TIF_FORK (1<<TIF_FORK)
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
+#define _TIF_DEBUG (1<<TIF_DEBUG)
+#define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK \
@@ -138,6 +144,9 @@
/* work to do on any return to user space */
#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
+/* flags to check in __switch_to() */
+#define _TIF_WORK_CTXSW (_TIF_DEBUG|_TIF_IO_BITMAP)
+
#define PREEMPT_ACTIVE 0x10000000
/*
diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86_64/tlbflush.h
index d16d5b6..983bd29 100644
--- a/include/asm-x86_64/tlbflush.h
+++ b/include/asm-x86_64/tlbflush.h
@@ -4,44 +4,44 @@
#include <linux/mm.h>
#include <asm/processor.h>
-#define __flush_tlb() \
- do { \
- unsigned long tmpreg; \
- \
- __asm__ __volatile__( \
- "movq %%cr3, %0; # flush TLB \n" \
- "movq %0, %%cr3; \n" \
- : "=r" (tmpreg) \
- :: "memory"); \
- } while (0)
+static inline unsigned long get_cr3(void)
+{
+ unsigned long cr3;
+ asm volatile("mov %%cr3,%0" : "=r" (cr3));
+ return cr3;
+}
-/*
- * Global pages have to be flushed a bit differently. Not a real
- * performance problem because this does not happen often.
- */
-#define __flush_tlb_global() \
- do { \
- unsigned long tmpreg, cr4, cr4_orig; \
- \
- __asm__ __volatile__( \
- "movq %%cr4, %2; # turn off PGE \n" \
- "movq %2, %1; \n" \
- "andq %3, %1; \n" \
- "movq %1, %%cr4; \n" \
- "movq %%cr3, %0; # flush TLB \n" \
- "movq %0, %%cr3; \n" \
- "movq %2, %%cr4; # turn PGE back on \n" \
- : "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig) \
- : "i" (~X86_CR4_PGE) \
- : "memory"); \
- } while (0)
+static inline void set_cr3(unsigned long cr3)
+{
+ asm volatile("mov %0,%%cr3" :: "r" (cr3) : "memory");
+}
-extern unsigned long pgkern_mask;
+static inline void __flush_tlb(void)
+{
+ set_cr3(get_cr3());
+}
-#define __flush_tlb_all() __flush_tlb_global()
+static inline unsigned long get_cr4(void)
+{
+ unsigned long cr4;
+ asm volatile("mov %%cr4,%0" : "=r" (cr4));
+ return cr4;
+}
+
+static inline void set_cr4(unsigned long cr4)
+{
+ asm volatile("mov %0,%%cr4" :: "r" (cr4) : "memory");
+}
+
+static inline void __flush_tlb_all(void)
+{
+ unsigned long cr4 = get_cr4();
+ set_cr4(cr4 & ~X86_CR4_PGE); /* clear PGE */
+ set_cr4(cr4); /* write old PGE again and flush TLBs */
+}
#define __flush_tlb_one(addr) \
- __asm__ __volatile__("invlpg %0": :"m" (*(char *) addr))
+ __asm__ __volatile__("invlpg (%0)" :: "r" (addr) : "memory")
/*
diff --git a/include/asm-x86_64/uaccess.h b/include/asm-x86_64/uaccess.h
index 1e1fa00..e856570 100644
--- a/include/asm-x86_64/uaccess.h
+++ b/include/asm-x86_64/uaccess.h
@@ -84,7 +84,7 @@
*/
#define __get_user_x(size,ret,x,ptr) \
- __asm__ __volatile__("call __get_user_" #size \
+ asm volatile("call __get_user_" #size \
:"=a" (ret),"=d" (x) \
:"c" (ptr) \
:"r8")
@@ -101,7 +101,7 @@
case 8: __get_user_x(8,__ret_gu,__val_gu,ptr); break; \
default: __get_user_bad(); break; \
} \
- (x) = (__typeof__(*(ptr)))__val_gu; \
+ (x) = (typeof(*(ptr)))__val_gu; \
__ret_gu; \
})
@@ -112,7 +112,7 @@
extern void __put_user_bad(void);
#define __put_user_x(size,ret,x,ptr) \
- __asm__ __volatile__("call __put_user_" #size \
+ asm volatile("call __put_user_" #size \
:"=a" (ret) \
:"c" (ptr),"d" (x) \
:"r8")
@@ -139,7 +139,7 @@
#define __put_user_check(x,ptr,size) \
({ \
int __pu_err; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ typeof(*(ptr)) __user *__pu_addr = (ptr); \
switch (size) { \
case 1: __put_user_x(1,__pu_err,x,__pu_addr); break; \
case 2: __put_user_x(2,__pu_err,x,__pu_addr); break; \
@@ -173,7 +173,7 @@
* aliasing issues.
*/
#define __put_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- __asm__ __volatile__( \
+ asm volatile( \
"1: mov"itype" %"rtype"1,%2\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
@@ -193,7 +193,7 @@
int __gu_err; \
unsigned long __gu_val; \
__get_user_size(__gu_val,(ptr),(size),__gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
+ (x) = (typeof(*(ptr)))__gu_val; \
__gu_err; \
})
@@ -217,7 +217,7 @@
} while (0)
#define __get_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- __asm__ __volatile__( \
+ asm volatile( \
"1: mov"itype" %2,%"rtype"1\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
@@ -237,15 +237,20 @@
*/
/* Handles exceptions in both to and from, but doesn't do access_ok */
-extern unsigned long copy_user_generic(void *to, const void *from, unsigned len);
+__must_check unsigned long
+copy_user_generic(void *to, const void *from, unsigned len);
-extern unsigned long copy_to_user(void __user *to, const void *from, unsigned len);
-extern unsigned long copy_from_user(void *to, const void __user *from, unsigned len);
-extern unsigned long copy_in_user(void __user *to, const void __user *from, unsigned len);
+__must_check unsigned long
+copy_to_user(void __user *to, const void *from, unsigned len);
+__must_check unsigned long
+copy_from_user(void *to, const void __user *from, unsigned len);
+__must_check unsigned long
+copy_in_user(void __user *to, const void __user *from, unsigned len);
-static __always_inline int __copy_from_user(void *dst, const void __user *src, unsigned size)
+static __always_inline __must_check
+int __copy_from_user(void *dst, const void __user *src, unsigned size)
{
- int ret = 0;
+ int ret = 0;
if (!__builtin_constant_p(size))
return copy_user_generic(dst,(__force void *)src,size);
switch (size) {
@@ -272,9 +277,10 @@
}
}
-static __always_inline int __copy_to_user(void __user *dst, const void *src, unsigned size)
+static __always_inline __must_check
+int __copy_to_user(void __user *dst, const void *src, unsigned size)
{
- int ret = 0;
+ int ret = 0;
if (!__builtin_constant_p(size))
return copy_user_generic((__force void *)dst,src,size);
switch (size) {
@@ -303,10 +309,10 @@
}
}
-
-static __always_inline int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
+static __always_inline __must_check
+int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
{
- int ret = 0;
+ int ret = 0;
if (!__builtin_constant_p(size))
return copy_user_generic((__force void *)dst,(__force void *)src,size);
switch (size) {
@@ -344,15 +350,17 @@
}
}
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long __strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *str, long n);
-long __strnlen_user(const char __user *str, long n);
-long strlen_user(const char __user *str);
-unsigned long clear_user(void __user *mem, unsigned long len);
-unsigned long __clear_user(void __user *mem, unsigned long len);
+__must_check long
+strncpy_from_user(char *dst, const char __user *src, long count);
+__must_check long
+__strncpy_from_user(char *dst, const char __user *src, long count);
+__must_check long strnlen_user(const char __user *str, long n);
+__must_check long __strnlen_user(const char __user *str, long n);
+__must_check long strlen_user(const char __user *str);
+__must_check unsigned long clear_user(void __user *mem, unsigned long len);
+__must_check unsigned long __clear_user(void __user *mem, unsigned long len);
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
+__must_check long __copy_from_user_inatomic(void *dst, const void __user *src, unsigned size);
+#define __copy_to_user_inatomic copy_user_generic
#endif /* __X86_64_UACCESS_H */
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index 80fd48e..6137146 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -600,9 +600,9 @@
#define __NR_faccessat 269
__SYSCALL(__NR_faccessat, sys_faccessat)
#define __NR_pselect6 270
-__SYSCALL(__NR_pselect6, sys_ni_syscall) /* for now */
+__SYSCALL(__NR_pselect6, sys_pselect6)
#define __NR_ppoll 271
-__SYSCALL(__NR_ppoll, sys_ni_syscall) /* for now */
+__SYSCALL(__NR_ppoll, sys_ppoll)
#define __NR_unshare 272
__SYSCALL(__NR_unshare, sys_unshare)
#define __NR_set_robust_list 273
@@ -623,16 +623,17 @@
#ifdef __KERNEL__
#define __NR_syscall_max __NR_move_pages
+#include <linux/err.h>
#ifndef __NO_STUBS
-/* user-visible error numbers are in the range -1 - -4095 */
+/* user-visible error numbers are in the range -1 - -MAX_ERRNO */
#define __syscall_clobber "r11","rcx","memory"
#define __syscall_return(type, res) \
do { \
- if ((unsigned long)(res) >= (unsigned long)(-127)) { \
+ if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) { \
errno = -(res); \
res = -1; \
} \
@@ -658,6 +659,7 @@
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_TIME
#define __ARCH_WANT_COMPAT_SYS_TIME
diff --git a/include/asm-x86_64/unwind.h b/include/asm-x86_64/unwind.h
index 1f6e9bf..2e7ff10 100644
--- a/include/asm-x86_64/unwind.h
+++ b/include/asm-x86_64/unwind.h
@@ -18,6 +18,7 @@
{
struct pt_regs regs;
struct task_struct *task;
+ unsigned call_frame:1;
};
#define UNW_PC(frame) (frame)->regs.rip
@@ -57,6 +58,10 @@
PTREGS_INFO(r15), \
PTREGS_INFO(rip)
+#define UNW_DEFAULT_RA(raItem, dataAlign) \
+ ((raItem).where == Memory && \
+ !((raItem).value * (dataAlign) + 8))
+
static inline void arch_unw_init_frame_info(struct unwind_frame_info *info,
/*const*/ struct pt_regs *regs)
{
@@ -94,8 +99,8 @@
#else
-#define UNW_PC(frame) ((void)(frame), 0)
-#define UNW_SP(frame) ((void)(frame), 0)
+#define UNW_PC(frame) ((void)(frame), 0UL)
+#define UNW_SP(frame) ((void)(frame), 0UL)
static inline int arch_unw_user_mode(const void *info)
{
diff --git a/include/asm-x86_64/vsyscall.h b/include/asm-x86_64/vsyscall.h
index 146b244..2281e93 100644
--- a/include/asm-x86_64/vsyscall.h
+++ b/include/asm-x86_64/vsyscall.h
@@ -4,6 +4,7 @@
enum vsyscall_num {
__NR_vgettimeofday,
__NR_vtime,
+ __NR_vgetcpu,
};
#define VSYSCALL_START (-10UL << 20)
@@ -15,6 +16,7 @@
#include <linux/seqlock.h>
#define __section_vxtime __attribute__ ((unused, __section__ (".vxtime"), aligned(16)))
+#define __section_vgetcpu_mode __attribute__ ((unused, __section__ (".vgetcpu_mode"), aligned(16)))
#define __section_wall_jiffies __attribute__ ((unused, __section__ (".wall_jiffies"), aligned(16)))
#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16)))
#define __section_sys_tz __attribute__ ((unused, __section__ (".sys_tz"), aligned(16)))
@@ -26,6 +28,9 @@
#define VXTIME_HPET 2
#define VXTIME_PMTMR 3
+#define VGETCPU_RDTSCP 1
+#define VGETCPU_LSL 2
+
struct vxtime_data {
long hpet_address; /* HPET base address */
int last;
@@ -40,6 +45,7 @@
/* vsyscall space (readonly) */
extern struct vxtime_data __vxtime;
+extern int __vgetcpu_mode;
extern struct timespec __xtime;
extern volatile unsigned long __jiffies;
extern unsigned long __wall_jiffies;
@@ -48,6 +54,7 @@
/* kernel space (writeable) */
extern struct vxtime_data vxtime;
+extern int vgetcpu_mode;
extern unsigned long wall_jiffies;
extern struct timezone sys_tz;
extern int sysctl_vsyscall;
@@ -55,6 +62,8 @@
extern int sysctl_vsyscall;
+extern void vsyscall_set_cpu(int cpu);
+
#define ARCH_HAVE_XTIME_LOCK 1
#endif /* __KERNEL__ */
diff --git a/include/linux/aer.h b/include/linux/aer.h
new file mode 100644
index 0000000..402e178
--- /dev/null
+++ b/include/linux/aer.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Zhang Yanmin (yanmin.zhang@intel.com)
+ */
+
+#ifndef _AER_H_
+#define _AER_H_
+
+#if defined(CONFIG_PCIEAER)
+/* pci-e port driver needs this function to enable aer */
+extern int pci_enable_pcie_error_reporting(struct pci_dev *dev);
+extern int pci_find_aer_capability(struct pci_dev *dev);
+extern int pci_disable_pcie_error_reporting(struct pci_dev *dev);
+extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
+#else
+#define pci_enable_pcie_error_reporting(dev) do { } while (0)
+#define pci_find_aer_capability(dev) do { } while (0)
+#define pci_disable_pcie_error_reporting(dev) do { } while (0)
+#define pci_cleanup_aer_uncorrect_error_status(dev) do { } while (0)
+#endif
+
+#endif //_AER_H_
+
diff --git a/include/linux/cdev.h b/include/linux/cdev.h
index 2216638..ee5f53f 100644
--- a/include/linux/cdev.h
+++ b/include/linux/cdev.h
@@ -23,5 +23,7 @@
void cd_forget(struct inode *);
+extern struct backing_dev_info directly_mappable_cdev_bdi;
+
#endif
#endif
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 9b4f110..060b961 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -99,6 +99,11 @@
#define __must_check
#endif
+#ifndef CONFIG_ENABLE_MUST_CHECK
+#undef __must_check
+#define __must_check
+#endif
+
/*
* Allow us to avoid 'defined but not used' warnings on functions and data,
* as well as force them to be emitted to the assembly file.
diff --git a/include/linux/device.h b/include/linux/device.h
index 1e5f30d..662e6a1 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -15,6 +15,7 @@
#include <linux/kobject.h>
#include <linux/klist.h>
#include <linux/list.h>
+#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pm.h>
@@ -51,14 +52,17 @@
int (*probe)(struct device * dev);
int (*remove)(struct device * dev);
void (*shutdown)(struct device * dev);
- int (*suspend)(struct device * dev, pm_message_t state);
- int (*resume)(struct device * dev);
+
+ int (*suspend)(struct device * dev, pm_message_t state);
+ int (*suspend_late)(struct device * dev, pm_message_t state);
+ int (*resume_early)(struct device * dev);
+ int (*resume)(struct device * dev);
};
-extern int bus_register(struct bus_type * bus);
+extern int __must_check bus_register(struct bus_type * bus);
extern void bus_unregister(struct bus_type * bus);
-extern void bus_rescan_devices(struct bus_type * bus);
+extern int __must_check bus_rescan_devices(struct bus_type * bus);
/* iterator helpers for buses */
@@ -67,9 +71,9 @@
struct device * bus_find_device(struct bus_type *bus, struct device *start,
void *data, int (*match)(struct device *, void *));
-int bus_for_each_drv(struct bus_type * bus, struct device_driver * start,
- void * data, int (*fn)(struct device_driver *, void *));
-
+int __must_check bus_for_each_drv(struct bus_type *bus,
+ struct device_driver *start, void *data,
+ int (*fn)(struct device_driver *, void *));
/* driverfs interface for exporting bus attributes */
@@ -82,7 +86,8 @@
#define BUS_ATTR(_name,_mode,_show,_store) \
struct bus_attribute bus_attr_##_name = __ATTR(_name,_mode,_show,_store)
-extern int bus_create_file(struct bus_type *, struct bus_attribute *);
+extern int __must_check bus_create_file(struct bus_type *,
+ struct bus_attribute *);
extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
struct device_driver {
@@ -101,16 +106,18 @@
void (*shutdown) (struct device * dev);
int (*suspend) (struct device * dev, pm_message_t state);
int (*resume) (struct device * dev);
+
+ unsigned int multithread_probe:1;
};
-extern int driver_register(struct device_driver * drv);
+extern int __must_check driver_register(struct device_driver * drv);
extern void driver_unregister(struct device_driver * drv);
extern struct device_driver * get_driver(struct device_driver * drv);
extern void put_driver(struct device_driver * drv);
extern struct device_driver *driver_find(const char *name, struct bus_type *bus);
-
+extern int driver_probe_done(void);
/* driverfs interface for exporting driver attributes */
@@ -123,16 +130,17 @@
#define DRIVER_ATTR(_name,_mode,_show,_store) \
struct driver_attribute driver_attr_##_name = __ATTR(_name,_mode,_show,_store)
-extern int driver_create_file(struct device_driver *, struct driver_attribute *);
+extern int __must_check driver_create_file(struct device_driver *,
+ struct driver_attribute *);
extern void driver_remove_file(struct device_driver *, struct driver_attribute *);
-extern int driver_for_each_device(struct device_driver * drv, struct device * start,
- void * data, int (*fn)(struct device *, void *));
+extern int __must_check driver_for_each_device(struct device_driver * drv,
+ struct device *start, void *data,
+ int (*fn)(struct device *, void *));
struct device * driver_find_device(struct device_driver *drv,
struct device *start, void *data,
int (*match)(struct device *, void *));
-
/*
* device classes
*/
@@ -146,17 +154,26 @@
struct list_head interfaces;
struct semaphore sem; /* locks both the children and interfaces lists */
+ struct kobject *virtual_dir;
+
struct class_attribute * class_attrs;
struct class_device_attribute * class_dev_attrs;
+ struct device_attribute * dev_attrs;
int (*uevent)(struct class_device *dev, char **envp,
int num_envp, char *buffer, int buffer_size);
+ int (*dev_uevent)(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size);
void (*release)(struct class_device *dev);
void (*class_release)(struct class *class);
+ void (*dev_release)(struct device *dev);
+
+ int (*suspend)(struct device *, pm_message_t state);
+ int (*resume)(struct device *);
};
-extern int class_register(struct class *);
+extern int __must_check class_register(struct class *);
extern void class_unregister(struct class *);
@@ -169,7 +186,8 @@
#define CLASS_ATTR(_name,_mode,_show,_store) \
struct class_attribute class_attr_##_name = __ATTR(_name,_mode,_show,_store)
-extern int class_create_file(struct class *, const struct class_attribute *);
+extern int __must_check class_create_file(struct class *,
+ const struct class_attribute *);
extern void class_remove_file(struct class *, const struct class_attribute *);
struct class_device_attribute {
@@ -182,7 +200,7 @@
struct class_device_attribute class_device_attr_##_name = \
__ATTR(_name,_mode,_show,_store)
-extern int class_device_create_file(struct class_device *,
+extern int __must_check class_device_create_file(struct class_device *,
const struct class_device_attribute *);
/**
@@ -242,10 +260,10 @@
}
-extern int class_device_register(struct class_device *);
+extern int __must_check class_device_register(struct class_device *);
extern void class_device_unregister(struct class_device *);
extern void class_device_initialize(struct class_device *);
-extern int class_device_add(struct class_device *);
+extern int __must_check class_device_add(struct class_device *);
extern void class_device_del(struct class_device *);
extern int class_device_rename(struct class_device *, char *);
@@ -255,7 +273,7 @@
extern void class_device_remove_file(struct class_device *,
const struct class_device_attribute *);
-extern int class_device_create_bin_file(struct class_device *,
+extern int __must_check class_device_create_bin_file(struct class_device *,
struct bin_attribute *);
extern void class_device_remove_bin_file(struct class_device *,
struct bin_attribute *);
@@ -266,22 +284,23 @@
int (*add) (struct class_device *, struct class_interface *);
void (*remove) (struct class_device *, struct class_interface *);
+ int (*add_dev) (struct device *, struct class_interface *);
+ void (*remove_dev) (struct device *, struct class_interface *);
};
-extern int class_interface_register(struct class_interface *);
+extern int __must_check class_interface_register(struct class_interface *);
extern void class_interface_unregister(struct class_interface *);
-extern struct class *class_create(struct module *owner, char *name);
+extern struct class *class_create(struct module *owner, const char *name);
extern void class_destroy(struct class *cls);
extern struct class_device *class_device_create(struct class *cls,
struct class_device *parent,
dev_t devt,
struct device *device,
- char *fmt, ...)
+ const char *fmt, ...)
__attribute__((format(printf,5,6)));
extern void class_device_destroy(struct class *cls, dev_t devt);
-
/* interface for exporting device attributes */
struct device_attribute {
struct attribute attr;
@@ -294,8 +313,13 @@
#define DEVICE_ATTR(_name,_mode,_show,_store) \
struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store)
-extern int device_create_file(struct device *device, struct device_attribute * entry);
+extern int __must_check device_create_file(struct device *device,
+ struct device_attribute * entry);
extern void device_remove_file(struct device * dev, struct device_attribute * attr);
+extern int __must_check device_create_bin_file(struct device *dev,
+ struct bin_attribute *attr);
+extern void device_remove_bin_file(struct device *dev,
+ struct bin_attribute *attr);
struct device {
struct klist klist_children;
struct klist_node knode_parent; /* node in sibling list */
@@ -305,6 +329,7 @@
struct kobject kobj;
char bus_id[BUS_ID_SIZE]; /* position on parent bus */
+ unsigned is_registered:1;
struct device_attribute uevent_attr;
struct device_attribute *devt_attr;
@@ -338,6 +363,7 @@
struct list_head node;
struct class *class; /* optional*/
dev_t devt; /* dev_t, creates the sysfs "dev" */
+ struct attribute_group **groups; /* optional groups */
void (*release)(struct device * dev);
};
@@ -356,38 +382,41 @@
static inline int device_is_registered(struct device *dev)
{
- return klist_node_attached(&dev->knode_bus);
+ return dev->is_registered;
}
/*
* High level routines for use by the bus drivers
*/
-extern int device_register(struct device * dev);
+extern int __must_check device_register(struct device * dev);
extern void device_unregister(struct device * dev);
extern void device_initialize(struct device * dev);
-extern int device_add(struct device * dev);
+extern int __must_check device_add(struct device * dev);
extern void device_del(struct device * dev);
-extern int device_for_each_child(struct device *, void *,
+extern int __must_check device_for_each_child(struct device *, void *,
int (*fn)(struct device *, void *));
+extern int device_rename(struct device *dev, char *new_name);
/*
* Manual binding of a device to driver. See drivers/base/bus.c
* for information on use.
*/
-extern void device_bind_driver(struct device * dev);
+extern int __must_check device_bind_driver(struct device *dev);
extern void device_release_driver(struct device * dev);
-extern int device_attach(struct device * dev);
-extern void driver_attach(struct device_driver * drv);
-extern void device_reprobe(struct device *dev);
+extern int __must_check device_attach(struct device * dev);
+extern int __must_check driver_attach(struct device_driver *drv);
+extern int __must_check device_reprobe(struct device *dev);
/*
* Easy functions for dynamically creating devices on the fly
*/
extern struct device *device_create(struct class *cls, struct device *parent,
- dev_t devt, char *fmt, ...)
+ dev_t devt, const char *fmt, ...)
__attribute__((format(printf,4,5)));
extern void device_destroy(struct class *cls, dev_t devt);
+extern int virtual_device_parent(struct device *dev);
+
/*
* Platform "fixup" functions - allow the platform to have their say
* about devices and actions that the general device layer doesn't
@@ -412,7 +441,7 @@
/* drivers/base/firmware.c */
-extern int firmware_register(struct subsystem *);
+extern int __must_check firmware_register(struct subsystem *);
extern void firmware_unregister(struct subsystem *);
/* debugging and troubleshooting/diagnostic helpers. */
diff --git a/include/linux/edd.h b/include/linux/edd.h
index 162512b..b2b3e68 100644
--- a/include/linux/edd.h
+++ b/include/linux/edd.h
@@ -52,6 +52,7 @@
#define EDD_CL_EQUALS 0x3d646465 /* "edd=" */
#define EDD_CL_OFF 0x666f /* "of" for off */
#define EDD_CL_SKIP 0x6b73 /* "sk" for skipmbr */
+#define EDD_CL_ON 0x6e6f /* "on" for on */
#ifndef __ASSEMBLY__
diff --git a/include/linux/eisa.h b/include/linux/eisa.h
index 4079242..1ff7c13 100644
--- a/include/linux/eisa.h
+++ b/include/linux/eisa.h
@@ -3,8 +3,8 @@
#include <linux/ioport.h>
#include <linux/device.h>
+#include <linux/mod_devicetable.h>
-#define EISA_SIG_LEN 8
#define EISA_MAX_SLOTS 8
#define EISA_MAX_RESOURCES 4
@@ -27,12 +27,6 @@
#define EISA_CONFIG_ENABLED 1
#define EISA_CONFIG_FORCED 2
-/* The EISA signature, in ASCII form, null terminated */
-struct eisa_device_id {
- char sig[EISA_SIG_LEN];
- unsigned long driver_data;
-};
-
/* There is not much we can say about an EISA device, apart from
* signature, slot number, and base address. dma_mask is set by
* default to parent device mask..*/
diff --git a/include/linux/err.h b/include/linux/err.h
index cd3b367..1ab1d44 100644
--- a/include/linux/err.h
+++ b/include/linux/err.h
@@ -15,6 +15,8 @@
*/
#define MAX_ERRNO 4095
+#ifndef __ASSEMBLY__
+
#define IS_ERR_VALUE(x) unlikely((x) >= (unsigned long)-MAX_ERRNO)
static inline void *ERR_PTR(long error)
@@ -32,4 +34,6 @@
return IS_ERR_VALUE((unsigned long)ptr);
}
+#endif
+
#endif /* _LINUX_ERR_H */
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 0eed918..cc08f56 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -460,7 +460,7 @@
*/
__u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/
__u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */
- __u16 s_reserved_gdt_blocks; /* Per group desc for online growth */
+ __le16 s_reserved_gdt_blocks; /* Per group desc for online growth */
/*
* Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set.
*/
@@ -473,7 +473,7 @@
__u8 s_reserved_char_pad;
__u16 s_reserved_word_pad;
__le32 s_default_mount_opts;
- __le32 s_first_meta_bg; /* First metablock block group */
+ __le32 s_first_meta_bg; /* First metablock block group */
__u32 s_reserved[190]; /* Padding to the end of the block */
};
diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h
index 2f18b95..4395e52 100644
--- a/include/linux/ext3_fs_i.h
+++ b/include/linux/ext3_fs_i.h
@@ -35,7 +35,7 @@
};
struct ext3_reserve_window_node {
- struct rb_node rsv_node;
+ struct rb_node rsv_node;
__u32 rsv_goal_size;
__u32 rsv_alloc_hit;
struct ext3_reserve_window rsv_window;
diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h
index c8307c0..ce0e610 100644
--- a/include/linux/ext3_jbd.h
+++ b/include/linux/ext3_jbd.h
@@ -23,7 +23,7 @@
/* Define the number of blocks we need to account to a transaction to
* modify one block of data.
- *
+ *
* We may have to touch one inode, one bitmap buffer, up to three
* indirection blocks, the group and superblock summaries, and the data
* block to complete the transaction. */
@@ -88,16 +88,16 @@
#endif
int
-ext3_mark_iloc_dirty(handle_t *handle,
+ext3_mark_iloc_dirty(handle_t *handle,
struct inode *inode,
struct ext3_iloc *iloc);
-/*
+/*
* On success, We end up with an outstanding reference count against
- * iloc->bh. This _must_ be cleaned up later.
+ * iloc->bh. This _must_ be cleaned up later.
*/
-int ext3_reserve_inode_write(handle_t *handle, struct inode *inode,
+int ext3_reserve_inode_write(handle_t *handle, struct inode *inode,
struct ext3_iloc *iloc);
int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 1d3e601..8f74dfb 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -512,7 +512,6 @@
struct timespec i_mtime;
struct timespec i_ctime;
unsigned int i_blkbits;
- unsigned long i_blksize;
unsigned long i_version;
blkcnt_t i_blocks;
unsigned short i_bytes;
@@ -528,11 +527,12 @@
#ifdef CONFIG_QUOTA
struct dquot *i_dquot[MAXQUOTAS];
#endif
- /* These three should probably be a union */
struct list_head i_devices;
- struct pipe_inode_info *i_pipe;
- struct block_device *i_bdev;
- struct cdev *i_cdev;
+ union {
+ struct pipe_inode_info *i_pipe;
+ struct block_device *i_bdev;
+ struct cdev *i_cdev;
+ };
int i_cindex;
__u32 i_generation;
@@ -554,9 +554,7 @@
atomic_t i_writecount;
void *i_security;
- union {
- void *generic_ip;
- } u;
+ void *i_private; /* fs or device private pointer */
#ifdef __NEED_I_SIZE_ORDERED
seqcount_t i_size_seqcount;
#endif
diff --git a/include/linux/getcpu.h b/include/linux/getcpu.h
new file mode 100644
index 0000000..031ed37
--- /dev/null
+++ b/include/linux/getcpu.h
@@ -0,0 +1,16 @@
+#ifndef _LINUX_GETCPU_H
+#define _LINUX_GETCPU_H 1
+
+/* Cache for getcpu() to speed it up. Results might be upto a jiffie
+ out of date, but will be faster.
+ User programs should not refer to the contents of this structure.
+ It is only a cache for vgetcpu(). It might change in future kernels.
+ The user program must store this information per thread (__thread)
+ If you want 100% accurate information pass NULL instead. */
+struct getcpu_cache {
+ unsigned long t0;
+ unsigned long t1;
+ unsigned long res[4];
+};
+
+#endif
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 8b34aab..bf2b6bc 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -67,7 +67,12 @@
#define GFP_HIGHUSER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL | \
__GFP_HIGHMEM)
+#ifdef CONFIG_NUMA
#define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY)
+#else
+#define GFP_THISNODE 0
+#endif
+
/* Flag - indicates that the buffer will be suitable for DMA. Ignored on some
platforms, used as appropriate on others */
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
index c0e7fab..c8f8df2 100644
--- a/include/linux/i2c-algo-bit.h
+++ b/include/linux/i2c-algo-bit.h
@@ -40,7 +40,6 @@
/* local settings */
int udelay; /* half-clock-cycle time in microsecs */
/* i.e. clock is (500 / udelay) KHz */
- int mdelay; /* in millisecs, unused */
int timeout; /* in jiffies */
};
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 18b0adf..9908f3f 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -35,7 +35,6 @@
/* local settings */
int udelay;
- int mdelay;
int timeout;
};
diff --git a/include/linux/i2c-algo-sibyte.h b/include/linux/i2c-algo-sibyte.h
deleted file mode 100644
index 03914de..0000000
--- a/include/linux/i2c-algo-sibyte.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2001,2002,2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef I2C_ALGO_SIBYTE_H
-#define I2C_ALGO_SIBYTE_H 1
-
-#include <linux/i2c.h>
-
-struct i2c_algo_sibyte_data {
- void *data; /* private data */
- int bus; /* which bus */
- void *reg_base; /* CSR base */
-};
-
-int i2c_sibyte_add_bus(struct i2c_adapter *, int speed);
-int i2c_sibyte_del_bus(struct i2c_adapter *);
-
-#endif /* I2C_ALGO_SIBYTE_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index eb0628a..9b5d047 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -64,14 +64,6 @@
*/
extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
-/*
- * Some adapter types (i.e. PCF 8584 based ones) may support slave behaviuor.
- * This is not tested/implemented yet and will change in the future.
- */
-extern int i2c_slave_send(struct i2c_client *,char*,int);
-extern int i2c_slave_recv(struct i2c_client *,char*,int);
-
-
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
@@ -201,10 +193,6 @@
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data);
- /* --- these optional/future use for some adapter types.*/
- int (*slave_send)(struct i2c_adapter *,char*,int);
- int (*slave_recv)(struct i2c_adapter *,char*,int);
-
/* --- ioctl like call to set div. parameters. */
int (*algo_control)(struct i2c_adapter *, unsigned int, unsigned long);
@@ -220,7 +208,7 @@
struct module *owner;
unsigned int id;
unsigned int class;
- struct i2c_algorithm *algo;/* the algorithm to access the bus */
+ const struct i2c_algorithm *algo; /* the algorithm to access the bus */
void *algo_data;
/* --- administration stuff. */
diff --git a/include/linux/init.h b/include/linux/init.h
index 6667785..e92b145 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -68,6 +68,7 @@
/* Defined in init/main.c */
extern char saved_command_line[];
+extern unsigned int reset_devices;
/* used by init/main.c */
extern void setup_arch(char **);
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index a04c154..a6d9daa 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -1,6 +1,6 @@
/*
* linux/include/linux/jbd.h
- *
+ *
* Written by Stephen C. Tweedie <sct@redhat.com>
*
* Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved
@@ -64,7 +64,7 @@
if ((n) <= journal_enable_debug) { \
printk (KERN_DEBUG "(%s, %d): %s: ", \
__FILE__, __LINE__, __FUNCTION__); \
- printk (f, ## a); \
+ printk (f, ## a); \
} \
} while (0)
#else
@@ -97,8 +97,8 @@
* number of outstanding buffers possible at any time. When the
* operation completes, any buffer credits not used are credited back to
* the transaction, so that at all times we know how many buffers the
- * outstanding updates on a transaction might possibly touch.
- *
+ * outstanding updates on a transaction might possibly touch.
+ *
* This is an opaque datatype.
**/
typedef struct handle_s handle_t; /* Atomic operation type */
@@ -108,7 +108,7 @@
* typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem.
*
* journal_t is linked to from the fs superblock structure.
- *
+ *
* We use the journal_t to keep track of all outstanding transaction
* activity on the filesystem, and to manage the state of the log
* writing process.
@@ -128,7 +128,7 @@
* On-disk structures
*/
-/*
+/*
* Descriptor block types:
*/
@@ -149,8 +149,8 @@
} journal_header_t;
-/*
- * The block tag: used to describe a single buffer in the journal
+/*
+ * The block tag: used to describe a single buffer in the journal
*/
typedef struct journal_block_tag_s
{
@@ -158,9 +158,9 @@
__be32 t_flags; /* See below */
} journal_block_tag_t;
-/*
+/*
* The revoke descriptor: used on disk to describe a series of blocks to
- * be revoked from the log
+ * be revoked from the log
*/
typedef struct journal_revoke_header_s
{
@@ -201,9 +201,9 @@
/* 0x0024 */
/* Remaining fields are only valid in a version-2 superblock */
- __be32 s_feature_compat; /* compatible feature set */
- __be32 s_feature_incompat; /* incompatible feature set */
- __be32 s_feature_ro_compat; /* readonly-compatible feature set */
+ __be32 s_feature_compat; /* compatible feature set */
+ __be32 s_feature_incompat; /* incompatible feature set */
+ __be32 s_feature_ro_compat; /* readonly-compatible feature set */
/* 0x0030 */
__u8 s_uuid[16]; /* 128-bit uuid for journal */
@@ -374,10 +374,10 @@
**/
/* Docbook can't yet cope with the bit fields, but will leave the documentation
- * in so it can be fixed later.
+ * in so it can be fixed later.
*/
-struct handle_s
+struct handle_s
{
/* Which compound transaction is this update a part of? */
transaction_t *h_transaction;
@@ -435,7 +435,7 @@
*
*/
-struct transaction_s
+struct transaction_s
{
/* Pointer to the journal for this transaction. [no locking] */
journal_t *t_journal;
@@ -455,7 +455,7 @@
T_RUNDOWN,
T_FLUSH,
T_COMMIT,
- T_FINISHED
+ T_FINISHED
} t_state;
/*
@@ -569,7 +569,7 @@
* journal_t.
* @j_flags: General journaling state flags
* @j_errno: Is there an outstanding uncleared error on the journal (from a
- * prior abort)?
+ * prior abort)?
* @j_sb_buffer: First part of superblock buffer
* @j_superblock: Second part of superblock buffer
* @j_format_version: Version of the superblock format
@@ -583,7 +583,7 @@
* @j_wait_transaction_locked: Wait queue for waiting for a locked transaction
* to start committing, or for a barrier lock to be released
* @j_wait_logspace: Wait queue for waiting for checkpointing to complete
- * @j_wait_done_commit: Wait queue for waiting for commit to complete
+ * @j_wait_done_commit: Wait queue for waiting for commit to complete
* @j_wait_checkpoint: Wait queue to trigger checkpointing
* @j_wait_commit: Wait queue to trigger commit
* @j_wait_updates: Wait queue to wait for updates to complete
@@ -592,7 +592,7 @@
* @j_tail: Journal tail - identifies the oldest still-used block in the
* journal.
* @j_free: Journal free - how many free blocks are there in the journal?
- * @j_first: The block number of the first usable block
+ * @j_first: The block number of the first usable block
* @j_last: The block number one beyond the last usable block
* @j_dev: Device where we store the journal
* @j_blocksize: blocksize for the location where we store the journal.
@@ -604,12 +604,12 @@
* @j_list_lock: Protects the buffer lists and internal buffer state.
* @j_inode: Optional inode where we store the journal. If present, all journal
* block numbers are mapped into this inode via bmap().
- * @j_tail_sequence: Sequence number of the oldest transaction in the log
+ * @j_tail_sequence: Sequence number of the oldest transaction in the log
* @j_transaction_sequence: Sequence number of the next transaction to grant
* @j_commit_sequence: Sequence number of the most recently committed
* transaction
* @j_commit_request: Sequence number of the most recent transaction wanting
- * commit
+ * commit
* @j_uuid: Uuid of client object.
* @j_task: Pointer to the current commit thread for this journal
* @j_max_transaction_buffers: Maximum number of metadata buffers to allow in a
@@ -699,7 +699,7 @@
wait_queue_head_t j_wait_updates;
/* Semaphore for locking against concurrent checkpoints */
- struct mutex j_checkpoint_mutex;
+ struct mutex j_checkpoint_mutex;
/*
* Journal head: identifies the first unused block in the journal.
@@ -732,7 +732,7 @@
*/
struct block_device *j_dev;
int j_blocksize;
- unsigned int j_blk_offset;
+ unsigned long j_blk_offset;
/*
* Device which holds the client fs. For internal journal this will be
@@ -823,8 +823,8 @@
void *j_private;
};
-/*
- * Journal flag definitions
+/*
+ * Journal flag definitions
*/
#define JFS_UNMOUNT 0x001 /* Journal thread is being destroyed */
#define JFS_ABORT 0x002 /* Journaling has been aborted for errors. */
@@ -833,7 +833,7 @@
#define JFS_LOADED 0x010 /* The journal superblock has been loaded */
#define JFS_BARRIER 0x020 /* Use IDE barriers */
-/*
+/*
* Function declarations for the journaling transaction and buffer
* management
*/
@@ -862,11 +862,11 @@
void __journal_insert_checkpoint(struct journal_head *, transaction_t *);
/* Buffer IO */
-extern int
+extern int
journal_write_metadata_buffer(transaction_t *transaction,
struct journal_head *jh_in,
struct journal_head **jh_out,
- int blocknr);
+ unsigned long blocknr);
/* Transaction locking */
extern void __wait_on_journal (journal_t *);
@@ -890,7 +890,7 @@
/* The journaling code user interface:
*
* Create and destroy handles
- * Register buffer modifications against the current transaction.
+ * Register buffer modifications against the current transaction.
*/
extern handle_t *journal_start(journal_t *, int nblocks);
@@ -917,11 +917,11 @@
int start, int len, int bsize);
extern journal_t * journal_init_inode (struct inode *);
extern int journal_update_format (journal_t *);
-extern int journal_check_used_features
+extern int journal_check_used_features
(journal_t *, unsigned long, unsigned long, unsigned long);
-extern int journal_check_available_features
+extern int journal_check_available_features
(journal_t *, unsigned long, unsigned long, unsigned long);
-extern int journal_set_features
+extern int journal_set_features
(journal_t *, unsigned long, unsigned long, unsigned long);
extern int journal_create (journal_t *);
extern int journal_load (journal_t *journal);
@@ -1015,7 +1015,7 @@
* bit, when set, indicates that we have had a fatal error somewhere,
* either inside the journaling layer or indicated to us by the client
* (eg. ext3), and that we and should not commit any further
- * transactions.
+ * transactions.
*/
static inline int is_journal_aborted(journal_t *journal)
@@ -1082,7 +1082,7 @@
#define BJ_Reserved 7 /* Buffer is reserved for access by journal */
#define BJ_Locked 8 /* Locked for I/O during commit */
#define BJ_Types 9
-
+
extern int jbd_blocks_per_page(struct inode *inode);
#ifdef __KERNEL__
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 329ebcf..c8d5f20 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -115,6 +115,21 @@
((long)(a) - (long)(b) >= 0))
#define time_before_eq(a,b) time_after_eq(b,a)
+/* Same as above, but does so with platform independent 64bit types.
+ * These must be used when utilizing jiffies_64 (i.e. return value of
+ * get_jiffies_64() */
+#define time_after64(a,b) \
+ (typecheck(__u64, a) && \
+ typecheck(__u64, b) && \
+ ((__s64)(b) - (__s64)(a) < 0))
+#define time_before64(a,b) time_after64(b,a)
+
+#define time_after_eq64(a,b) \
+ (typecheck(__u64, a) && \
+ typecheck(__u64, b) && \
+ ((__s64)(a) - (__s64)(b) >= 0))
+#define time_before_eq64(a,b) time_after_eq64(b,a)
+
/*
* Have the 32 bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e44a37e..4d00988d 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -187,6 +187,7 @@
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
extern int panic_timeout;
extern int panic_on_oops;
+extern int panic_on_unrecovered_nmi;
extern int tainted;
extern const char *print_tainted(void);
extern void add_taint(unsigned);
@@ -349,4 +350,11 @@
/* Trap pasters of __FUNCTION__ at compile-time */
#define __FUNCTION__ (__func__)
+/* This helps us to avoid #ifdef CONFIG_NUMA */
+#ifdef CONFIG_NUMA
+#define NUMA_BUILD 1
+#else
+#define NUMA_BUILD 0
+#endif
+
#endif
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 2d22932..bcd9cd1 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -20,6 +20,7 @@
#include <linux/types.h>
#include <linux/list.h>
#include <linux/sysfs.h>
+#include <linux/compiler.h>
#include <linux/spinlock.h>
#include <linux/rwsem.h>
#include <linux/kref.h>
@@ -71,12 +72,12 @@
extern void kobject_init(struct kobject *);
extern void kobject_cleanup(struct kobject *);
-extern int kobject_add(struct kobject *);
+extern int __must_check kobject_add(struct kobject *);
extern void kobject_del(struct kobject *);
-extern int kobject_rename(struct kobject *, const char *new_name);
+extern int __must_check kobject_rename(struct kobject *, const char *new_name);
-extern int kobject_register(struct kobject *);
+extern int __must_check kobject_register(struct kobject *);
extern void kobject_unregister(struct kobject *);
extern struct kobject * kobject_get(struct kobject *);
@@ -128,8 +129,8 @@
extern void kset_init(struct kset * k);
-extern int kset_add(struct kset * k);
-extern int kset_register(struct kset * k);
+extern int __must_check kset_add(struct kset * k);
+extern int __must_check kset_register(struct kset * k);
extern void kset_unregister(struct kset * k);
static inline struct kset * to_kset(struct kobject * kobj)
@@ -239,7 +240,7 @@
(obj)->subsys.kset.kobj.kset = &(_subsys).kset
extern void subsystem_init(struct subsystem *);
-extern int subsystem_register(struct subsystem *);
+extern int __must_check subsystem_register(struct subsystem *);
extern void subsystem_unregister(struct subsystem *);
static inline struct subsystem * subsys_get(struct subsystem * s)
@@ -258,7 +259,8 @@
ssize_t (*store)(struct subsystem *, const char *, size_t);
};
-extern int subsys_create_file(struct subsystem * , struct subsys_attribute *);
+extern int __must_check subsys_create_file(struct subsystem * ,
+ struct subsys_attribute *);
#if defined(CONFIG_HOTPLUG)
void kobject_uevent(struct kobject *kobj, enum kobject_action action);
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 932021f..6c9873f 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -35,9 +35,13 @@
#endif
#define KPROBE_ENTRY(name) \
- .section .kprobes.text, "ax"; \
+ .pushsection .kprobes.text, "ax"; \
ENTRY(name)
+#define KPROBE_END(name) \
+ END(name); \
+ .popsection
+
#ifndef END
#define END(name) \
.size name, .-name
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 856f0ee..7b703b6 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -16,6 +16,7 @@
#include <linux/mutex.h>
#include <linux/debug_locks.h>
#include <linux/backing-dev.h>
+#include <linux/mm_types.h>
struct mempolicy;
struct anon_vma;
@@ -198,6 +199,7 @@
void (*open)(struct vm_area_struct * area);
void (*close)(struct vm_area_struct * area);
struct page * (*nopage)(struct vm_area_struct * area, unsigned long address, int *type);
+ unsigned long (*nopfn)(struct vm_area_struct * area, unsigned long address);
int (*populate)(struct vm_area_struct * area, unsigned long address, unsigned long len, pgprot_t prot, unsigned long pgoff, int nonblock);
/* notification that a previously read-only page is about to become
@@ -215,62 +217,6 @@
struct mmu_gather;
struct inode;
-/*
- * Each physical page in the system has a struct page associated with
- * it to keep track of whatever it is we are using the page for at the
- * moment. Note that we have no way to track which tasks are using
- * a page, though if it is a pagecache page, rmap structures can tell us
- * who is mapping it.
- */
-struct page {
- unsigned long flags; /* Atomic flags, some possibly
- * updated asynchronously */
- atomic_t _count; /* Usage count, see below. */
- atomic_t _mapcount; /* Count of ptes mapped in mms,
- * to show when page is mapped
- * & limit reverse map searches.
- */
- union {
- struct {
- unsigned long private; /* Mapping-private opaque data:
- * usually used for buffer_heads
- * if PagePrivate set; used for
- * swp_entry_t if PageSwapCache;
- * indicates order in the buddy
- * system if PG_buddy is set.
- */
- struct address_space *mapping; /* If low bit clear, points to
- * inode address_space, or NULL.
- * If page mapped as anonymous
- * memory, low bit is set, and
- * it points to anon_vma object:
- * see PAGE_MAPPING_ANON below.
- */
- };
-#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
- spinlock_t ptl;
-#endif
- };
- pgoff_t index; /* Our offset within mapping. */
- struct list_head lru; /* Pageout list, eg. active_list
- * protected by zone->lru_lock !
- */
- /*
- * On machines where all RAM is mapped into kernel address space,
- * we can simply calculate the virtual address. On machines with
- * highmem some memory is mapped into kernel virtual memory
- * dynamically, so we need a place to store that address.
- * Note that this field could be 16 bits on x86 ... ;)
- *
- * Architectures with slow multiplication can define
- * WANT_PAGE_VIRTUAL in asm/page.h
- */
-#if defined(WANT_PAGE_VIRTUAL)
- void *virtual; /* Kernel virtual address (NULL if
- not kmapped, ie. highmem) */
-#endif /* WANT_PAGE_VIRTUAL */
-};
-
#define page_private(page) ((page)->private)
#define set_page_private(page, v) ((page)->private = (v))
@@ -501,7 +447,11 @@
static inline unsigned long zone_to_nid(struct zone *zone)
{
- return zone->zone_pgdat->node_id;
+#ifdef CONFIG_NUMA
+ return zone->node;
+#else
+ return 0;
+#endif
}
static inline unsigned long page_to_nid(struct page *page)
@@ -546,11 +496,6 @@
*/
#include <linux/vmstat.h>
-#ifndef CONFIG_DISCONTIGMEM
-/* The array of struct pages - for discontigmem use pgdat->lmem_map */
-extern struct page *mem_map;
-#endif
-
static __always_inline void *lowmem_page_address(struct page *page)
{
return __va(page_to_pfn(page) << PAGE_SHIFT);
@@ -650,6 +595,12 @@
#define NOPAGE_OOM ((struct page *) (-1))
/*
+ * Error return values for the *_nopfn functions
+ */
+#define NOPFN_SIGBUS ((unsigned long) -1)
+#define NOPFN_OOM ((unsigned long) -2)
+
+/*
* Different kinds of faults, as returned by handle_mm_fault().
* Used to decide whether a process gets delivered SIGBUS or
* just gets major/minor fault counters bumped up.
@@ -937,6 +888,56 @@
extern void free_area_init_node(int nid, pg_data_t *pgdat,
unsigned long * zones_size, unsigned long zone_start_pfn,
unsigned long *zholes_size);
+#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
+/*
+ * With CONFIG_ARCH_POPULATES_NODE_MAP set, an architecture may initialise its
+ * zones, allocate the backing mem_map and account for memory holes in a more
+ * architecture independent manner. This is a substitute for creating the
+ * zone_sizes[] and zholes_size[] arrays and passing them to
+ * free_area_init_node()
+ *
+ * An architecture is expected to register range of page frames backed by
+ * physical memory with add_active_range() before calling
+ * free_area_init_nodes() passing in the PFN each zone ends at. At a basic
+ * usage, an architecture is expected to do something like
+ *
+ * unsigned long max_zone_pfns[MAX_NR_ZONES] = {max_dma, max_normal_pfn,
+ * max_highmem_pfn};
+ * for_each_valid_physical_page_range()
+ * add_active_range(node_id, start_pfn, end_pfn)
+ * free_area_init_nodes(max_zone_pfns);
+ *
+ * If the architecture guarantees that there are no holes in the ranges
+ * registered with add_active_range(), free_bootmem_active_regions()
+ * will call free_bootmem_node() for each registered physical page range.
+ * Similarly sparse_memory_present_with_active_regions() calls
+ * memory_present() for each range when SPARSEMEM is enabled.
+ *
+ * See mm/page_alloc.c for more information on each function exposed by
+ * CONFIG_ARCH_POPULATES_NODE_MAP
+ */
+extern void free_area_init_nodes(unsigned long *max_zone_pfn);
+extern void add_active_range(unsigned int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
+extern void shrink_active_range(unsigned int nid, unsigned long old_end_pfn,
+ unsigned long new_end_pfn);
+extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
+extern void remove_all_active_ranges(void);
+extern unsigned long absent_pages_in_range(unsigned long start_pfn,
+ unsigned long end_pfn);
+extern void get_pfn_range_for_nid(unsigned int nid,
+ unsigned long *start_pfn, unsigned long *end_pfn);
+extern unsigned long find_min_pfn_with_active_regions(void);
+extern unsigned long find_max_pfn_with_active_regions(void);
+extern void free_bootmem_with_active_regions(int nid,
+ unsigned long max_low_pfn);
+extern void sparse_memory_present_with_active_regions(int nid);
+#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+extern int early_pfn_to_nid(unsigned long pfn);
+#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+extern void set_dma_reserve(unsigned long new_dma_reserve);
extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long);
extern void setup_per_zone_pages_min(void);
extern void mem_init(void);
@@ -1130,7 +1131,7 @@
extern int randomize_va_space;
#endif
-const char *arch_vma_name(struct vm_area_struct *vma);
+__attribute__((weak)) const char *arch_vma_name(struct vm_area_struct *vma);
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
new file mode 100644
index 0000000..c3852fd
--- /dev/null
+++ b/include/linux/mm_types.h
@@ -0,0 +1,67 @@
+#ifndef _LINUX_MM_TYPES_H
+#define _LINUX_MM_TYPES_H
+
+#include <linux/types.h>
+#include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct address_space;
+
+/*
+ * Each physical page in the system has a struct page associated with
+ * it to keep track of whatever it is we are using the page for at the
+ * moment. Note that we have no way to track which tasks are using
+ * a page, though if it is a pagecache page, rmap structures can tell us
+ * who is mapping it.
+ */
+struct page {
+ unsigned long flags; /* Atomic flags, some possibly
+ * updated asynchronously */
+ atomic_t _count; /* Usage count, see below. */
+ atomic_t _mapcount; /* Count of ptes mapped in mms,
+ * to show when page is mapped
+ * & limit reverse map searches.
+ */
+ union {
+ struct {
+ unsigned long private; /* Mapping-private opaque data:
+ * usually used for buffer_heads
+ * if PagePrivate set; used for
+ * swp_entry_t if PageSwapCache;
+ * indicates order in the buddy
+ * system if PG_buddy is set.
+ */
+ struct address_space *mapping; /* If low bit clear, points to
+ * inode address_space, or NULL.
+ * If page mapped as anonymous
+ * memory, low bit is set, and
+ * it points to anon_vma object:
+ * see PAGE_MAPPING_ANON below.
+ */
+ };
+#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+ spinlock_t ptl;
+#endif
+ };
+ pgoff_t index; /* Our offset within mapping. */
+ struct list_head lru; /* Pageout list, eg. active_list
+ * protected by zone->lru_lock !
+ */
+ /*
+ * On machines where all RAM is mapped into kernel address space,
+ * we can simply calculate the virtual address. On machines with
+ * highmem some memory is mapped into kernel virtual memory
+ * dynamically, so we need a place to store that address.
+ * Note that this field could be 16 bits on x86 ... ;)
+ *
+ * Architectures with slow multiplication can define
+ * WANT_PAGE_VIRTUAL in asm/page.h
+ */
+#if defined(WANT_PAGE_VIRTUAL)
+ void *virtual; /* Kernel virtual address (NULL if
+ not kmapped, ie. highmem) */
+#endif /* WANT_PAGE_VIRTUAL */
+};
+
+#endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 3693f1a..59855b8 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -58,6 +58,7 @@
NR_WRITEBACK,
NR_UNSTABLE_NFS, /* NFS unstable pages */
NR_BOUNCE,
+ NR_VMSCAN_WRITE,
#ifdef CONFIG_NUMA
NUMA_HIT, /* allocated in intended node */
NUMA_MISS, /* allocated in non intended node */
@@ -167,6 +168,7 @@
unsigned long lowmem_reserve[MAX_NR_ZONES];
#ifdef CONFIG_NUMA
+ int node;
/*
* zone reclaim becomes active if more unmapped pages exist.
*/
@@ -305,6 +307,18 @@
struct zone *zones[MAX_NUMNODES * MAX_NR_ZONES + 1]; // NULL delimited
};
+#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
+struct node_active_region {
+ unsigned long start_pfn;
+ unsigned long end_pfn;
+ int nid;
+};
+#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+
+#ifndef CONFIG_DISCONTIGMEM
+/* The array of struct pages - for discontigmem use pgdat->lmem_map */
+extern struct page *mem_map;
+#endif
/*
* The pg_data_t structure is used in machines with CONFIG_DISCONTIGMEM
@@ -518,7 +532,8 @@
#endif
-#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+#if !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID) && \
+ !defined(CONFIG_ARCH_POPULATES_NODE_MAP)
#define early_pfn_to_nid(nid) (0UL)
#endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index f7ca0b0..e0c393c 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -308,4 +308,16 @@
kernel_ulong_t driver_info;
};
+/* EISA */
+
+#define EISA_SIG_LEN 8
+
+/* The EISA signature, in ASCII form, null terminated */
+struct eisa_device_id {
+ char sig[EISA_SIG_LEN];
+ kernel_ulong_t driver_data;
+};
+
+#define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
+
#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 36f5bcf..98c9b9f 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -315,10 +315,6 @@
extern struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx);
extern void put_nfs_open_context(struct nfs_open_context *ctx);
extern struct nfs_open_context *nfs_find_open_context(struct inode *inode, struct rpc_cred *cred, int mode);
-extern struct vfsmount *nfs_do_submount(const struct vfsmount *mnt_parent,
- const struct dentry *dentry,
- struct nfs_fh *fh,
- struct nfs_fattr *fattr);
/* linux/net/ipv4/ipconfig.c: trims ip addr off front of name, too. */
extern u32 root_nfs_parse_addr(char *name); /*__init*/
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
index f9edcd2..31a3cb6 100644
--- a/include/linux/nfsd/nfsfh.h
+++ b/include/linux/nfsd/nfsfh.h
@@ -269,14 +269,8 @@
fhp->fh_post_uid = inode->i_uid;
fhp->fh_post_gid = inode->i_gid;
fhp->fh_post_size = inode->i_size;
- if (inode->i_blksize) {
- fhp->fh_post_blksize = inode->i_blksize;
- fhp->fh_post_blocks = inode->i_blocks;
- } else {
- fhp->fh_post_blksize = BLOCK_SIZE;
- /* how much do we care for accuracy with MinixFS? */
- fhp->fh_post_blocks = (inode->i_size+511) >> 9;
- }
+ fhp->fh_post_blksize = BLOCK_SIZE;
+ fhp->fh_post_blocks = inode->i_blocks;
fhp->fh_post_rdev[0] = htonl((u32)imajor(inode));
fhp->fh_post_rdev[1] = htonl((u32)iminor(inode));
fhp->fh_post_atime = inode->i_atime;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 8565b81..5c3a417 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -49,6 +49,7 @@
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/list.h>
+#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/device.h>
@@ -346,6 +347,8 @@
int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
void (*remove) (struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
int (*suspend) (struct pci_dev *dev, pm_message_t state); /* Device suspended */
+ int (*suspend_late) (struct pci_dev *dev, pm_message_t state);
+ int (*resume_early) (struct pci_dev *dev);
int (*resume) (struct pci_dev *dev); /* Device woken up */
int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); /* Enable wake event */
void (*shutdown) (struct pci_dev *dev);
@@ -353,6 +356,8 @@
struct pci_error_handlers *err_handler;
struct device_driver driver;
struct pci_dynids dynids;
+
+ int multithread_probe;
};
#define to_pci_driver(drv) container_of(drv,struct pci_driver, driver)
@@ -401,7 +406,7 @@
extern struct list_head pci_devices; /* list of all devices */
void pcibios_fixup_bus(struct pci_bus *);
-int pcibios_enable_device(struct pci_dev *, int mask);
+int __must_check pcibios_enable_device(struct pci_dev *, int mask);
char *pcibios_setup (char *str);
/* Used only when drivers/pci/setup.c is used */
@@ -428,7 +433,7 @@
struct pci_dev * pci_scan_single_device(struct pci_bus *bus, int devfn);
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
unsigned int pci_scan_child_bus(struct pci_bus *bus);
-void pci_bus_add_device(struct pci_dev *dev);
+int __must_check pci_bus_add_device(struct pci_dev *dev);
void pci_read_bridge_bases(struct pci_bus *child);
struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res);
int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge);
@@ -436,6 +441,7 @@
extern void pci_dev_put(struct pci_dev *dev);
extern void pci_remove_bus(struct pci_bus *b);
extern void pci_remove_bus_device(struct pci_dev *dev);
+extern void pci_stop_bus_device(struct pci_dev *dev);
void pci_setup_cardbus(struct pci_bus *bus);
/* Generic PCI functions exported to card drivers */
@@ -488,19 +494,19 @@
return pci_bus_write_config_dword (dev->bus, dev->devfn, where, val);
}
-int pci_enable_device(struct pci_dev *dev);
-int pci_enable_device_bars(struct pci_dev *dev, int mask);
+int __must_check pci_enable_device(struct pci_dev *dev);
+int __must_check pci_enable_device_bars(struct pci_dev *dev, int mask);
void pci_disable_device(struct pci_dev *dev);
void pci_set_master(struct pci_dev *dev);
#define HAVE_PCI_SET_MWI
-int pci_set_mwi(struct pci_dev *dev);
+int __must_check pci_set_mwi(struct pci_dev *dev);
void pci_clear_mwi(struct pci_dev *dev);
void pci_intx(struct pci_dev *dev, int enable);
int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno);
-int pci_assign_resource(struct pci_dev *dev, int i);
-int pci_assign_resource_fixed(struct pci_dev *dev, int i);
+int __must_check pci_assign_resource(struct pci_dev *dev, int i);
+int __must_check pci_assign_resource_fixed(struct pci_dev *dev, int i);
void pci_restore_bars(struct pci_dev *dev);
/* ROM control related routines */
@@ -526,23 +532,24 @@
void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
int (*)(struct pci_dev *, u8, u8));
#define HAVE_PCI_REQ_REGIONS 2
-int pci_request_regions(struct pci_dev *, const char *);
+int __must_check pci_request_regions(struct pci_dev *, const char *);
void pci_release_regions(struct pci_dev *);
-int pci_request_region(struct pci_dev *, int, const char *);
+int __must_check pci_request_region(struct pci_dev *, int, const char *);
void pci_release_region(struct pci_dev *, int);
/* drivers/pci/bus.c */
-int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
- resource_size_t size, resource_size_t align,
- resource_size_t min, unsigned int type_mask,
- void (*alignf)(void *, struct resource *,
- resource_size_t, resource_size_t),
- void *alignf_data);
+int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
+ struct resource *res, resource_size_t size,
+ resource_size_t align, resource_size_t min,
+ unsigned int type_mask,
+ void (*alignf)(void *, struct resource *,
+ resource_size_t, resource_size_t),
+ void *alignf_data);
void pci_enable_bridges(struct pci_bus *bus);
/* Proper probing supporting hot-pluggable devices */
-int __pci_register_driver(struct pci_driver *, struct module *);
-static inline int pci_register_driver(struct pci_driver *driver)
+int __must_check __pci_register_driver(struct pci_driver *, struct module *);
+static inline int __must_check pci_register_driver(struct pci_driver *driver)
{
return __pci_register_driver(driver, THIS_MODULE);
}
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 6a1e098..ab032ce 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1411,6 +1411,7 @@
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103
+#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132
#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203
@@ -1482,9 +1483,6 @@
#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430
#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460
#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480
-#define PCI_DEVICE_ID_MARVELL_GT96100 0x9652
-#define PCI_DEVICE_ID_MARVELL_GT96100A 0x9653
-
#define PCI_VENDOR_ID_V3 0x11b0
#define PCI_DEVICE_ID_V3_V960 0x0001
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 96930cb..7d0e26c 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -196,7 +196,7 @@
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
-#define PCI_CAP_ID_HT_IRQCONF 0x08 /* HyperTransport IRQ Configuration */
+#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific capability */
#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h
index b44e01a..6cd91e3 100644
--- a/include/linux/pcieport_if.h
+++ b/include/linux/pcieport_if.h
@@ -62,6 +62,12 @@
int (*suspend) (struct pcie_device *dev, pm_message_t state);
int (*resume) (struct pcie_device *dev);
+ /* Service Error Recovery Handler */
+ struct pci_error_handlers *err_handler;
+
+ /* Link Reset Capability - AER service driver specific */
+ pci_ers_result_t (*reset_link) (struct pci_dev *dev);
+
const struct pcie_port_service_id *id_table;
struct device_driver driver;
};
diff --git a/include/linux/pid.h b/include/linux/pid.h
index 29960b0..93da7e2 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -76,6 +76,8 @@
enum pid_type type, int nr));
extern void FASTCALL(detach_pid(struct task_struct *task, enum pid_type));
+extern void FASTCALL(transfer_pid(struct task_struct *old,
+ struct task_struct *new, enum pid_type));
/*
* look up a PID in the hash table. Must be called with the tasklist_lock
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 782090c..29cd6de 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -49,6 +49,8 @@
int (*remove)(struct platform_device *);
void (*shutdown)(struct platform_device *);
int (*suspend)(struct platform_device *, pm_message_t state);
+ int (*suspend_late)(struct platform_device *, pm_message_t state);
+ int (*resume_early)(struct platform_device *);
int (*resume)(struct platform_device *);
struct device_driver driver;
};
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 658c1b9..6b27e07 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -142,29 +142,61 @@
} pm_message_t;
/*
- * There are 4 important states driver can be in:
- * ON -- driver is working
- * FREEZE -- stop operations and apply whatever policy is applicable to a
- * suspended driver of that class, freeze queues for block like IDE
- * does, drop packets for ethernet, etc... stop DMA engine too etc...
- * so a consistent image can be saved; but do not power any hardware
- * down.
- * SUSPEND - like FREEZE, but hardware is doing as much powersaving as
- * possible. Roughly pci D3.
+ * Several driver power state transitions are externally visible, affecting
+ * the state of pending I/O queues and (for drivers that touch hardware)
+ * interrupts, wakeups, DMA, and other hardware state. There may also be
+ * internal transitions to various low power modes, which are transparent
+ * to the rest of the driver stack (such as a driver that's ON gating off
+ * clocks which are not in active use).
*
- * Unfortunately, current drivers only recognize numeric values 0 (ON) and 3
- * (SUSPEND). We'll need to fix the drivers. So yes, putting 3 to all different
- * defines is intentional, and will go away as soon as drivers are fixed. Also
- * note that typedef is neccessary, we'll probably want to switch to
- * typedef struct pm_message_t { int event; int flags; } pm_message_t
- * or something similar soon.
+ * One transition is triggered by resume(), after a suspend() call; the
+ * message is implicit:
+ *
+ * ON Driver starts working again, responding to hardware events
+ * and software requests. The hardware may have gone through
+ * a power-off reset, or it may have maintained state from the
+ * previous suspend() which the driver will rely on while
+ * resuming. On most platforms, there are no restrictions on
+ * availability of resources like clocks during resume().
+ *
+ * Other transitions are triggered by messages sent using suspend(). All
+ * these transitions quiesce the driver, so that I/O queues are inactive.
+ * That commonly entails turning off IRQs and DMA; there may be rules
+ * about how to quiesce that are specific to the bus or the device's type.
+ * (For example, network drivers mark the link state.) Other details may
+ * differ according to the message:
+ *
+ * SUSPEND Quiesce, enter a low power device state appropriate for
+ * the upcoming system state (such as PCI_D3hot), and enable
+ * wakeup events as appropriate.
+ *
+ * FREEZE Quiesce operations so that a consistent image can be saved;
+ * but do NOT otherwise enter a low power device state, and do
+ * NOT emit system wakeup events.
+ *
+ * PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring
+ * the system from a snapshot taken after an earlier FREEZE.
+ * Some drivers will need to reset their hardware state instead
+ * of preserving it, to ensure that it's never mistaken for the
+ * state which that earlier snapshot had set up.
+ *
+ * A minimally power-aware driver treats all messages as SUSPEND, fully
+ * reinitializes its device during resume() -- whether or not it was reset
+ * during the suspend/resume cycle -- and can't issue wakeup events.
+ *
+ * More power-aware drivers may also use low power states at runtime as
+ * well as during system sleep states like PM_SUSPEND_STANDBY. They may
+ * be able to use wakeup events to exit from runtime low-power states,
+ * or from system low-power states such as standby or suspend-to-RAM.
*/
#define PM_EVENT_ON 0
#define PM_EVENT_FREEZE 1
#define PM_EVENT_SUSPEND 2
+#define PM_EVENT_PRETHAW 3
#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
@@ -190,6 +222,7 @@
extern suspend_disk_method_t pm_disk_mode;
extern int device_suspend(pm_message_t state);
+extern int device_prepare_suspend(pm_message_t state);
#define device_set_wakeup_enable(dev,val) \
((dev)->power.should_wakeup = !!(val))
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 3435ca3..57f70bc 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -268,7 +268,9 @@
struct proc_maps_private {
struct pid *pid;
struct task_struct *task;
+#ifdef CONFIG_MMU
struct vm_area_struct *tail_vma;
+#endif
};
#endif /* _LINUX_PROC_FS_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 34ed0d9..9d4aa7f 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -819,6 +819,11 @@
unsigned did_exec:1;
pid_t pid;
pid_t tgid;
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+ /* Canary value for the -fstack-protector gcc feature */
+ unsigned long stack_canary;
+#endif
/*
* pointers to (original) parent process, youngest child, younger sibling,
* older sibling, respectively. (p->father can be replaced with
@@ -865,6 +870,15 @@
struct key *thread_keyring; /* keyring private to this thread */
unsigned char jit_keyring; /* default keyring to attach requested keys to */
#endif
+ /*
+ * fpu_counter contains the number of consecutive context switches
+ * that the FPU is used. If this is over a threshold, the lazy fpu
+ * saving becomes unlazy to save the trap. This is an unsigned char
+ * so that after 256 times the counter wraps and the behavior turns
+ * lazy again; this to deal with bursty apps that only use FPU for
+ * a short time
+ */
+ unsigned char fpu_counter;
int oomkilladj; /* OOM kill score adjustment (bit shift). */
char comm[TASK_COMM_LEN]; /* executable name excluding path
- access with [gs]et_task_comm (which lock
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 66d6eb7..a96fd93 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -60,7 +60,7 @@
extern kmem_cache_t *kmem_cache_create(const char *, size_t, size_t, unsigned long,
void (*)(void *, kmem_cache_t *, unsigned long),
void (*)(void *, kmem_cache_t *, unsigned long));
-extern int kmem_cache_destroy(kmem_cache_t *);
+extern void kmem_cache_destroy(kmem_cache_t *);
extern int kmem_cache_shrink(kmem_cache_t *);
extern void *kmem_cache_alloc(kmem_cache_t *, gfp_t);
extern void *kmem_cache_zalloc(struct kmem_cache *, gfp_t);
@@ -249,7 +249,7 @@
unsigned long,
void (*)(void *, struct kmem_cache *, unsigned long),
void (*)(void *, struct kmem_cache *, unsigned long));
-int kmem_cache_destroy(struct kmem_cache *c);
+void kmem_cache_destroy(struct kmem_cache *c);
void *kmem_cache_alloc(struct kmem_cache *c, gfp_t flags);
void *kmem_cache_zalloc(struct kmem_cache *, gfp_t);
void kmem_cache_free(struct kmem_cache *c, void *b);
diff --git a/include/linux/smb.h b/include/linux/smb.h
index 6df3b15..f098dff 100644
--- a/include/linux/smb.h
+++ b/include/linux/smb.h
@@ -89,7 +89,6 @@
struct timespec f_atime;
struct timespec f_mtime;
struct timespec f_ctime;
- unsigned long f_blksize;
unsigned long f_blocks;
int f_unix;
};
diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h
index 9cc81e5..50e2b01 100644
--- a/include/linux/stacktrace.h
+++ b/include/linux/stacktrace.h
@@ -5,15 +5,16 @@
struct stack_trace {
unsigned int nr_entries, max_entries;
unsigned long *entries;
+ int skip; /* input argument: How many entries to skip */
+ int all_contexts; /* input argument: if true do than one stack */
};
extern void save_stack_trace(struct stack_trace *trace,
- struct task_struct *task, int all_contexts,
- unsigned int skip);
+ struct task_struct *task);
extern void print_stack_trace(struct stack_trace *trace, int spaces);
#else
-# define save_stack_trace(trace, task, all, skip) do { } while (0)
+# define save_stack_trace(trace, task) do { } while (0)
# define print_stack_trace(trace) do { } while (0)
#endif
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 008f04c..3f0f716 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -53,6 +53,7 @@
struct compat_stat;
struct compat_timeval;
struct robust_list_head;
+struct getcpu_cache;
#include <linux/types.h>
#include <linux/aio_abi.h>
@@ -596,5 +597,6 @@
size_t __user *len_ptr);
asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
size_t len);
+asmlinkage long sys_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *cache);
#endif
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index eca5557..1b24bd4 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -150,6 +150,8 @@
KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
KERN_COMPAT_LOG=73, /* int: print compat layer messages */
KERN_MAX_LOCK_DEPTH=74,
+ KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
+ KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
};
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 1ea5d3c..6d5c43d 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -10,6 +10,7 @@
#ifndef _SYSFS_H_
#define _SYSFS_H_
+#include <linux/compiler.h>
#include <asm/atomic.h>
struct kobject;
@@ -86,40 +87,44 @@
#ifdef CONFIG_SYSFS
-extern int
+extern int __must_check
sysfs_create_dir(struct kobject *);
extern void
sysfs_remove_dir(struct kobject *);
-extern int
+extern int __must_check
sysfs_rename_dir(struct kobject *, const char *new_name);
-extern int
+extern int __must_check
sysfs_create_file(struct kobject *, const struct attribute *);
-extern int
+extern int __must_check
sysfs_update_file(struct kobject *, const struct attribute *);
-extern int
+extern int __must_check
sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, mode_t mode);
extern void
sysfs_remove_file(struct kobject *, const struct attribute *);
-extern int
+extern int __must_check
sysfs_create_link(struct kobject * kobj, struct kobject * target, const char * name);
extern void
sysfs_remove_link(struct kobject *, const char * name);
-int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr);
-int sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr);
+int __must_check sysfs_create_bin_file(struct kobject *kobj,
+ struct bin_attribute *attr);
+void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr);
-int sysfs_create_group(struct kobject *, const struct attribute_group *);
+int __must_check sysfs_create_group(struct kobject *,
+ const struct attribute_group *);
void sysfs_remove_group(struct kobject *, const struct attribute_group *);
void sysfs_notify(struct kobject * k, char *dir, char *attr);
+extern int __must_check sysfs_init(void);
+
#else /* CONFIG_SYSFS */
static inline int sysfs_create_dir(struct kobject * k)
@@ -191,6 +196,11 @@
{
}
+static inline int __must_check sysfs_init(void)
+{
+ return 0;
+}
+
#endif /* CONFIG_SYSFS */
#endif /* _SYSFS_H_ */
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index 391e7ed..a48d7f1 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -19,4 +19,26 @@
#endif /* ARCH_HAS_NOCACHE_UACCESS */
+/**
+ * probe_kernel_address(): safely attempt to read from a location
+ * @addr: address to read from - its type is type typeof(retval)*
+ * @retval: read into this variable
+ *
+ * Safely read from address @addr into variable @revtal. If a kernel fault
+ * happens, handle that and return -EFAULT.
+ * We ensure that the __get_user() is executed in atomic context so that
+ * do_page_fault() doesn't attempt to take mmap_sem. This makes
+ * probe_kernel_address() suitable for use within regions where the caller
+ * already holds mmap_sem, or other locks which nest inside mmap_sem.
+ */
+#define probe_kernel_address(addr, retval) \
+ ({ \
+ long ret; \
+ \
+ inc_preempt_count(); \
+ ret = __get_user(retval, addr); \
+ dec_preempt_count(); \
+ ret; \
+ })
+
#endif /* __LINUX_UACCESS_H__ */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index d2bd0c8..0da15b0 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -19,6 +19,7 @@
#include <linux/fs.h> /* for struct file_operations */
#include <linux/completion.h> /* for struct completion */
#include <linux/sched.h> /* for current && schedule_timeout */
+#include <linux/mutex.h> /* for struct mutex */
struct usb_device;
struct usb_driver;
@@ -102,8 +103,13 @@
* number from the USB core by calling usb_register_dev().
* @condition: binding state of the interface: not bound, binding
* (in probe()), bound to a driver, or unbinding (in disconnect())
+ * @is_active: flag set when the interface is bound and not suspended.
+ * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
+ * capability during autosuspend.
* @dev: driver model's view of this device
* @class_dev: driver model's class view of this device.
+ * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not
+ * allowed unless the counter is 0.
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
@@ -142,8 +148,12 @@
int minor; /* minor number this interface is
* bound to */
enum usb_interface_condition condition; /* state of binding */
+ unsigned is_active:1; /* the interface is not suspended */
+ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
+
struct device dev; /* interface specific device info */
struct class_device *class_dev;
+ int pm_usage_cnt; /* usage counter for autosuspend */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
#define interface_to_usbdev(intf) \
@@ -254,8 +264,6 @@
/* ----------------------------------------------------------------------- */
-struct usb_operations;
-
/* USB device number allocation bitmap */
struct usb_devmap {
unsigned long devicemap[128 / (8*sizeof(unsigned long))];
@@ -268,6 +276,7 @@
struct device *controller; /* host/master side hardware */
int busnum; /* Bus number (in order of reg) */
char *bus_name; /* stable id (PCI slot_name etc) */
+ u8 uses_dma; /* Does the host controller use DMA? */
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
@@ -276,10 +285,8 @@
* round-robin allocation */
struct usb_devmap devmap; /* device address allocation map */
- struct usb_operations *op; /* Operations (specific to the HC) */
struct usb_device *root_hub; /* Root hub */
struct list_head bus_list; /* list of busses */
- void *hcpriv; /* Host Controller private data */
int bandwidth_allocated; /* on this bus: how much of the time
* reserved for periodic (intr/iso)
@@ -294,8 +301,6 @@
struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
struct class_device *class_dev; /* class device for this bus */
- struct kref kref; /* reference counting for this bus */
- void (*release)(struct usb_bus *bus);
#if defined(CONFIG_USB_MON)
struct mon_bus *mon_bus; /* non-null when associated */
@@ -350,6 +355,7 @@
unsigned short bus_mA; /* Current available from the bus */
u8 portnum; /* Parent port number (origin 1) */
+ u8 level; /* Number of USB hub ancestors */
int have_langid; /* whether string_langid is valid */
int string_langid; /* language ID for strings */
@@ -373,6 +379,15 @@
int maxchild; /* Number of ports if hub */
struct usb_device *children[USB_MAXCHILDREN];
+
+#ifdef CONFIG_PM
+ struct work_struct autosuspend; /* for delayed autosuspends */
+ struct mutex pm_mutex; /* protects PM operations */
+ int pm_usage_cnt; /* usage counter for autosuspend */
+
+ unsigned auto_pm:1; /* autosuspend/resume in progress */
+ unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */
+#endif
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -384,7 +399,7 @@
#define usb_unlock_device(udev) up(&(udev)->dev.sem)
#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem)
extern int usb_lock_device_for_reset(struct usb_device *udev,
- struct usb_interface *iface);
+ const struct usb_interface *iface);
/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
@@ -393,6 +408,17 @@
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
+/* USB autosuspend and autoresume */
+#ifdef CONFIG_USB_SUSPEND
+extern int usb_autopm_get_interface(struct usb_interface *intf);
+extern void usb_autopm_put_interface(struct usb_interface *intf);
+
+#else
+#define usb_autopm_get_interface(intf) 0
+#define usb_autopm_put_interface(intf) do {} while (0)
+#endif
+
+
/*-------------------------------------------------------------------------*/
/* for drivers using iso endpoints */
@@ -423,10 +449,10 @@
extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
int minor);
-extern struct usb_interface *usb_ifnum_to_if(struct usb_device *dev,
+extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
unsigned ifnum);
extern struct usb_host_interface *usb_altnum_to_altsetting(
- struct usb_interface *intf, unsigned int altnum);
+ const struct usb_interface *intf, unsigned int altnum);
/**
@@ -464,6 +490,20 @@
/*-------------------------------------------------------------------------*/
+extern int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd);
+extern int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd);
+
+/*-------------------------------------------------------------------------*/
+
#define USB_DEVICE_ID_MATCH_DEVICE \
(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
#define USB_DEVICE_ID_MATCH_DEV_RANGE \
@@ -540,7 +580,17 @@
};
/**
- * struct usb_driver - identifies USB driver to usbcore
+ * struct usbdrv_wrap - wrapper for driver-model structure
+ * @driver: The driver-model core driver structure.
+ * @for_devices: Non-zero for device drivers, 0 for interface drivers.
+ */
+struct usbdrv_wrap {
+ struct device_driver driver;
+ int for_devices;
+};
+
+/**
+ * struct usb_driver - identifies USB interface driver to usbcore
* @name: The driver name should be unique among USB drivers,
* and should normally be the same as the module name.
* @probe: Called to see if the driver is willing to manage a particular
@@ -567,12 +617,14 @@
* or your driver's probe function will never get called.
* @dynids: used internally to hold the list of dynamically added device
* ids for this driver.
- * @driver: the driver model core driver structure.
+ * @drvwrap: Driver-model core structure wrapper.
* @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be
* added to this driver by preventing the sysfs file from being created.
+ * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
+ * for interfaces bound to this driver.
*
- * USB drivers must provide a name, probe() and disconnect() methods,
- * and an id_table. Other driver fields are optional.
+ * USB interface drivers must provide a name, probe() and disconnect()
+ * methods, and an id_table. Other driver fields are optional.
*
* The id_table is used in hotplugging. It holds a set of descriptors,
* and specialized data may be associated with each entry. That table
@@ -606,10 +658,44 @@
const struct usb_device_id *id_table;
struct usb_dynids dynids;
- struct device_driver driver;
+ struct usbdrv_wrap drvwrap;
unsigned int no_dynamic_id:1;
+ unsigned int supports_autosuspend:1;
};
-#define to_usb_driver(d) container_of(d, struct usb_driver, driver)
+#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
+
+/**
+ * struct usb_device_driver - identifies USB device driver to usbcore
+ * @name: The driver name should be unique among USB drivers,
+ * and should normally be the same as the module name.
+ * @probe: Called to see if the driver is willing to manage a particular
+ * device. If it is, probe returns zero and uses dev_set_drvdata()
+ * to associate driver-specific data with the device. If unwilling
+ * to manage the device, return a negative errno value.
+ * @disconnect: Called when the device is no longer accessible, usually
+ * because it has been (or is being) disconnected or the driver's
+ * module is being unloaded.
+ * @suspend: Called when the device is going to be suspended by the system.
+ * @resume: Called when the device is being resumed by the system.
+ * @drvwrap: Driver-model core structure wrapper.
+ * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
+ * for devices bound to this driver.
+ *
+ * USB drivers must provide all the fields listed above except drvwrap.
+ */
+struct usb_device_driver {
+ const char *name;
+
+ int (*probe) (struct usb_device *udev);
+ void (*disconnect) (struct usb_device *udev);
+
+ int (*suspend) (struct usb_device *udev, pm_message_t message);
+ int (*resume) (struct usb_device *udev);
+ struct usbdrv_wrap drvwrap;
+ unsigned int supports_autosuspend:1;
+};
+#define to_usb_device_driver(d) container_of(d, struct usb_device_driver, \
+ drvwrap.driver)
extern struct bus_type usb_bus_type;
@@ -633,13 +719,17 @@
* use these in module_init()/module_exit()
* and don't forget MODULE_DEVICE_TABLE(usb, ...)
*/
-int usb_register_driver(struct usb_driver *, struct module *);
+extern int usb_register_driver(struct usb_driver *, struct module *);
static inline int usb_register(struct usb_driver *driver)
{
return usb_register_driver(driver, THIS_MODULE);
}
extern void usb_deregister(struct usb_driver *);
+extern int usb_register_device_driver(struct usb_device_driver *,
+ struct module *);
+extern void usb_deregister_device_driver(struct usb_device_driver *);
+
extern int usb_register_dev(struct usb_interface *intf,
struct usb_class_driver *class_driver);
extern void usb_deregister_dev(struct usb_interface *intf,
@@ -885,7 +975,7 @@
* @setup_packet: pointer to the setup_packet buffer
* @transfer_buffer: pointer to the transfer buffer
* @buffer_length: length of the transfer buffer
- * @complete: pointer to the usb_complete_t function
+ * @complete_fn: pointer to the usb_complete_t function
* @context: what to set the urb context to.
*
* Initializes a control urb with the proper information needed to submit
@@ -897,7 +987,7 @@
unsigned char *setup_packet,
void *transfer_buffer,
int buffer_length,
- usb_complete_t complete,
+ usb_complete_t complete_fn,
void *context)
{
spin_lock_init(&urb->lock);
@@ -906,7 +996,7 @@
urb->setup_packet = setup_packet;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = buffer_length;
- urb->complete = complete;
+ urb->complete = complete_fn;
urb->context = context;
}
@@ -917,7 +1007,7 @@
* @pipe: the endpoint pipe
* @transfer_buffer: pointer to the transfer buffer
* @buffer_length: length of the transfer buffer
- * @complete: pointer to the usb_complete_t function
+ * @complete_fn: pointer to the usb_complete_t function
* @context: what to set the urb context to.
*
* Initializes a bulk urb with the proper information needed to submit it
@@ -928,7 +1018,7 @@
unsigned int pipe,
void *transfer_buffer,
int buffer_length,
- usb_complete_t complete,
+ usb_complete_t complete_fn,
void *context)
{
spin_lock_init(&urb->lock);
@@ -936,7 +1026,7 @@
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = buffer_length;
- urb->complete = complete;
+ urb->complete = complete_fn;
urb->context = context;
}
@@ -947,7 +1037,7 @@
* @pipe: the endpoint pipe
* @transfer_buffer: pointer to the transfer buffer
* @buffer_length: length of the transfer buffer
- * @complete: pointer to the usb_complete_t function
+ * @complete_fn: pointer to the usb_complete_t function
* @context: what to set the urb context to.
* @interval: what to set the urb interval to, encoded like
* the endpoint descriptor's bInterval value.
@@ -963,7 +1053,7 @@
unsigned int pipe,
void *transfer_buffer,
int buffer_length,
- usb_complete_t complete,
+ usb_complete_t complete_fn,
void *context,
int interval)
{
@@ -972,7 +1062,7 @@
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = buffer_length;
- urb->complete = complete;
+ urb->complete = complete_fn;
urb->context = context;
if (dev->speed == USB_SPEED_HIGH)
urb->interval = 1 << (interval - 1);
@@ -990,7 +1080,6 @@
extern int usb_unlink_urb(struct urb *urb);
extern void usb_kill_urb(struct urb *urb);
-#define HAVE_USB_BUFFERS
void *usb_buffer_alloc (struct usb_device *dev, size_t size,
gfp_t mem_flags, dma_addr_t *dma);
void usb_buffer_free (struct usb_device *dev, size_t size,
@@ -1003,14 +1092,14 @@
#endif
struct scatterlist;
-int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int nents);
+int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int nents);
#if 0
-void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents);
+void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents);
#endif
-void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents);
+void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents);
/*-------------------------------------------------------------------*
* SYNCHRONOUS CALL SUPPORT *
@@ -1038,6 +1127,9 @@
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+/* this request isn't really synchronous, but it belongs with the others */
+extern int usb_driver_set_configuration(struct usb_device *udev, int config);
+
/*
* timeouts, in milliseconds, used for sending/receiving control messages
* they typically complete within a few frames (msec) after they're issued
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
new file mode 100644
index 0000000..6bd2359
--- /dev/null
+++ b/include/linux/usb/audio.h
@@ -0,0 +1,53 @@
+/*
+ * <linux/usb/audio.h> -- USB Audio definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/audio10.pdf
+ */
+
+#ifndef __LINUX_USB_AUDIO_H
+#define __LINUX_USB_AUDIO_H
+
+#include <linux/types.h>
+
+/* A.2 Audio Interface Subclass Codes */
+#define USB_SUBCLASS_AUDIOCONTROL 0x01
+#define USB_SUBCLASS_AUDIOSTREAMING 0x02
+#define USB_SUBCLASS_MIDISTREAMING 0x03
+
+/* 4.3.2 Class-Specific AC Interface Descriptor */
+struct usb_ac_header_descriptor {
+ __u8 bLength; // 8+n
+ __u8 bDescriptorType; // USB_DT_CS_INTERFACE
+ __u8 bDescriptorSubtype; // USB_MS_HEADER
+ __le16 bcdADC; // 0x0100
+ __le16 wTotalLength; // includes Unit and Terminal desc.
+ __u8 bInCollection; // n
+ __u8 baInterfaceNr[]; // [n]
+} __attribute__ ((packed));
+
+#define USB_DT_AC_HEADER_SIZE(n) (8+(n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \
+struct usb_ac_header_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __le16 bcdADC; \
+ __le16 wTotalLength; \
+ __u8 bInCollection; \
+ __u8 baInterfaceNr[n]; \
+} __attribute__ ((packed))
+
+#endif
diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h
new file mode 100644
index 0000000..11a97d5
--- /dev/null
+++ b/include/linux/usb/midi.h
@@ -0,0 +1,112 @@
+/*
+ * <linux/usb/midi.h> -- USB MIDI definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for MIDI Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/midi10.pdf
+ */
+
+#ifndef __LINUX_USB_MIDI_H
+#define __LINUX_USB_MIDI_H
+
+#include <linux/types.h>
+
+/* A.1 MS Class-Specific Interface Descriptor Subtypes */
+#define USB_MS_HEADER 0x01
+#define USB_MS_MIDI_IN_JACK 0x02
+#define USB_MS_MIDI_OUT_JACK 0x03
+#define USB_MS_ELEMENT 0x04
+
+/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */
+#define USB_MS_GENERAL 0x01
+
+/* A.3 MS MIDI IN and OUT Jack Types */
+#define USB_MS_EMBEDDED 0x01
+#define USB_MS_EXTERNAL 0x02
+
+/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */
+struct usb_ms_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le16 bcdMSC;
+ __le16 wTotalLength;
+} __attribute__ ((packed));
+
+#define USB_DT_MS_HEADER_SIZE 7
+
+/* 6.1.2.2 MIDI IN Jack Descriptor */
+struct usb_midi_in_jack_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType; // USB_DT_CS_INTERFACE
+ __u8 bDescriptorSubtype; // USB_MS_MIDI_IN_JACK
+ __u8 bJackType; // USB_MS_EMBEDDED/EXTERNAL
+ __u8 bJackID;
+ __u8 iJack;
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_IN_SIZE 6
+
+struct usb_midi_source_pin {
+ __u8 baSourceID;
+ __u8 baSourcePin;
+} __attribute__ ((packed));
+
+/* 6.1.2.3 MIDI OUT Jack Descriptor */
+struct usb_midi_out_jack_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType; // USB_DT_CS_INTERFACE
+ __u8 bDescriptorSubtype; // USB_MS_MIDI_OUT_JACK
+ __u8 bJackType; // USB_MS_EMBEDDED/EXTERNAL
+ __u8 bJackID;
+ __u8 bNrInputPins; // p
+ struct usb_midi_source_pin pins[]; // [p]
+ /*__u8 iJack; -- ommitted due to variable-sized pins[] */
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \
+struct usb_midi_out_jack_descriptor_##p { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bJackType; \
+ __u8 bJackID; \
+ __u8 bNrInputPins; \
+ struct usb_midi_source_pin pins[p]; \
+ __u8 iJack; \
+} __attribute__ ((packed))
+
+/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */
+struct usb_ms_endpoint_descriptor {
+ __u8 bLength; // 4+n
+ __u8 bDescriptorType; // USB_DT_CS_ENDPOINT
+ __u8 bDescriptorSubtype; // USB_MS_GENERAL
+ __u8 bNumEmbMIDIJack; // n
+ __u8 baAssocJackID[]; // [n]
+} __attribute__ ((packed));
+
+#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \
+struct usb_ms_endpoint_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bNumEmbMIDIJack; \
+ __u8 baAssocJackID[n]; \
+} __attribute__ ((packed))
+
+#endif
diff --git a/include/linux/usb_otg.h b/include/linux/usb/otg.h
similarity index 97%
rename from include/linux/usb_otg.h
rename to include/linux/usb/otg.h
index f827f6e..9897f7a 100644
--- a/include/linux/usb_otg.h
+++ b/include/linux/usb/otg.h
@@ -1,4 +1,4 @@
-// include/linux/usb_otg.h
+// include/linux/usb/otg.h
/*
* These APIs may be used between USB controllers. USB device drivers
@@ -52,7 +52,7 @@
u16 port_change;
/* bind/unbind the host controller */
- int (*set_host)(struct otg_transceiver *otg,
+ int (*set_host)(struct otg_transceiver *otg,
struct usb_bus *host);
/* bind/unbind the peripheral controller */
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index e7fc5fe..2ae76fe 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -108,6 +108,9 @@
#ifdef CONFIG_USB_STORAGE_ALAUDA
#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */
#endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+#define US_PR_KARMA 0xf5 /* Rio Karma */
+#endif
#define US_PR_DEVICE 0xff /* Use device's value */
diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h
index 46919f9..4d0909e 100644
--- a/include/linux/vermagic.h
+++ b/include/linux/vermagic.h
@@ -24,5 +24,5 @@
#define VERMAGIC_STRING \
UTS_RELEASE " " \
MODULE_VERMAGIC_SMP MODULE_VERMAGIC_PREEMPT \
- MODULE_VERMAGIC_MODULE_UNLOAD MODULE_ARCH_VERMAGIC \
- "gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
+ MODULE_VERMAGIC_MODULE_UNLOAD MODULE_ARCH_VERMAGIC
+
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index dee88c6b..ce5f148 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -62,7 +62,6 @@
extern struct vm_struct *get_vm_area_node(unsigned long size,
unsigned long flags, int node);
extern struct vm_struct *remove_vm_area(void *addr);
-extern struct vm_struct *__remove_vm_area(void *addr);
extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
struct page ***pages);
extern void unmap_vm_area(struct vm_struct *area);
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index 810462f..bb495b7 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -341,7 +341,7 @@
extern struct video_device* video_devdata(struct file*);
#define to_video_device(cd) container_of(cd, struct video_device, class_dev)
-static inline int
+static inline int __must_check
video_device_create_file(struct video_device *vfd,
struct class_device_attribute *attr)
{
diff --git a/init/Kconfig b/init/Kconfig
index 9a7656f..4381006 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -273,21 +273,24 @@
This enables the legacy 16-bit UID syscall wrappers.
config SYSCTL
- bool "Sysctl support" if EMBEDDED
- default y
- ---help---
- The sysctl interface provides a means of dynamically changing
- certain kernel parameters and variables on the fly without requiring
- a recompile of the kernel or reboot of the system. The primary
- interface consists of a system call, but if you say Y to "/proc
- file system support", a tree of modifiable sysctl entries will be
- generated beneath the /proc/sys directory. They are explained in the
- files in <file:Documentation/sysctl/>. Note that enabling this
- option will enlarge the kernel by at least 8 KB.
+ bool
- As it is generally a good thing, you should say Y here unless
- building a kernel for install/rescue disks or your system is very
- limited in memory.
+config SYSCTL_SYSCALL
+ bool "Sysctl syscall support"
+ default n
+ select SYSCTL
+ ---help---
+ Enable the deprecated sysctl system call. sys_sysctl uses
+ binary paths that have been found to be a major pain to maintain
+ and use. The interface in /proc/sys is now the primary and what
+ everyone uses.
+
+ Nothing has been using the binary sysctl interface for some time
+ time now so nothing should break if you disable sysctl syscall
+ support, and you kernel will get marginally smaller.
+
+ Unless you have an application that uses the sys_syscall interface
+ you should probably say N here.
config KALLSYMS
bool "Load all symbols for debugging/kksymoops" if EMBEDDED
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 94aeec7..b290aad 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -8,6 +8,7 @@
#include <linux/security.h>
#include <linux/delay.h>
#include <linux/mount.h>
+#include <linux/device.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_fs_sb.h>
@@ -403,6 +404,10 @@
ssleep(root_delay);
}
+ /* wait for the known devices to complete their probing */
+ while (driver_probe_done() != 0)
+ msleep(100);
+
md_run_setup();
if (saved_root_name[0]) {
diff --git a/init/main.c b/init/main.c
index 8651a72..0766e69 100644
--- a/init/main.c
+++ b/init/main.c
@@ -128,6 +128,18 @@
static unsigned int max_cpus = NR_CPUS;
/*
+ * If set, this is an indication to the drivers that reset the underlying
+ * device before going ahead with the initialization otherwise driver might
+ * rely on the BIOS and skip the reset operation.
+ *
+ * This is useful if kernel is booting in an unreliable environment.
+ * For ex. kdump situaiton where previous kernel has crashed, BIOS has been
+ * skipped and devices will be in unknown state.
+ */
+unsigned int reset_devices;
+EXPORT_SYMBOL(reset_devices);
+
+/*
* Setup routine for controlling SMP activation
*
* Command-line option of "nosmp" or "maxcpus=0" will disable SMP
@@ -153,6 +165,14 @@
__setup("maxcpus=", maxcpus);
+static int __init set_reset_devices(char *str)
+{
+ reset_devices = 1;
+ return 1;
+}
+
+__setup("reset_devices", set_reset_devices);
+
static char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
static const char *panic_later, *panic_param;
@@ -162,16 +182,19 @@
static int __init obsolete_checksetup(char *line)
{
struct obs_kernel_param *p;
+ int had_early_param = 0;
p = __setup_start;
do {
int n = strlen(p->str);
if (!strncmp(line, p->str, n)) {
if (p->early) {
- /* Already done in parse_early_param? (Needs
- * exact match on param part) */
+ /* Already done in parse_early_param?
+ * (Needs exact match on param part).
+ * Keep iterating, as we can have early
+ * params and __setups of same names 8( */
if (line[n] == '\0' || line[n] == '=')
- return 1;
+ had_early_param = 1;
} else if (!p->setup_func) {
printk(KERN_WARNING "Parameter %s is obsolete,"
" ignored\n", p->str);
@@ -181,7 +204,8 @@
}
p++;
} while (p < __setup_end);
- return 0;
+
+ return had_early_param;
}
/*
@@ -464,6 +488,7 @@
* Need to run as early as possible, to initialize the
* lockdep hash:
*/
+ unwind_init();
lockdep_init();
local_irq_disable();
@@ -502,7 +527,6 @@
__stop___param - __start___param,
&unknown_bootoption);
sort_main_extable();
- unwind_init();
trap_init();
rcu_init();
init_IRQ();
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 02e6f67..840f8a6 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -115,7 +115,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_mtime = inode->i_ctime = inode->i_atime =
CURRENT_TIME;
@@ -1275,10 +1274,7 @@
out_sysctl:
if (mq_sysctl_table)
unregister_sysctl_table(mq_sysctl_table);
- if (kmem_cache_destroy(mqueue_inode_cachep)) {
- printk(KERN_INFO
- "mqueue_inode_cache: not all structures were freed\n");
- }
+ kmem_cache_destroy(mqueue_inode_cachep);
return error;
}
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index cff4151..1b32c2c 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -289,7 +289,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_mapping->backing_dev_info = &cpuset_backing_dev_info;
diff --git a/kernel/fork.c b/kernel/fork.c
index f9b014e..a0dad84 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -45,6 +45,7 @@
#include <linux/cn_proc.h>
#include <linux/delayacct.h>
#include <linux/taskstats_kern.h>
+#include <linux/random.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
@@ -175,6 +176,10 @@
tsk->thread_info = ti;
setup_thread_stack(tsk, orig);
+#ifdef CONFIG_CC_STACKPROTECTOR
+ tsk->stack_canary = get_random_int();
+#endif
+
/* One for us, one for whoever does the "release_task()" (usually parent) */
atomic_set(&tsk->usage,2);
atomic_set(&tsk->fs_excl, 0);
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 9bad178..c088e55 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -224,7 +224,14 @@
trace->max_entries = MAX_STACK_TRACE_ENTRIES - nr_stack_trace_entries;
trace->entries = stack_trace + nr_stack_trace_entries;
- save_stack_trace(trace, NULL, 0, 3);
+ trace->skip = 3;
+ trace->all_contexts = 0;
+
+ /* Make sure to not recurse in case the the unwinder needs to tak
+e locks. */
+ lockdep_off();
+ save_stack_trace(trace, NULL);
+ lockdep_on();
trace->max_entries = trace->nr_entries;
diff --git a/kernel/panic.c b/kernel/panic.c
index 8010b9b..6ceb664 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -21,6 +21,7 @@
#include <linux/debug_locks.h>
int panic_on_oops;
+int panic_on_unrecovered_nmi;
int tainted;
static int pause_on_oops;
static int pause_on_oops_flag;
@@ -270,3 +271,15 @@
{
do_oops_enter_exit();
}
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+/*
+ * Called when gcc's -fstack-protector feature is used, and
+ * gcc detects corruption of the on-stack canary value
+ */
+void __stack_chk_fail(void)
+{
+ panic("stack-protector: Kernel stack is corrupted");
+}
+EXPORT_SYMBOL(__stack_chk_fail);
+#endif
diff --git a/kernel/pid.c b/kernel/pid.c
index 93e212f..8387e8c 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -223,9 +223,6 @@
struct pid_link *link;
struct pid *pid;
- WARN_ON(!task->pid); /* to be removed soon */
- WARN_ON(!nr); /* to be removed soon */
-
link = &task->pids[type];
link->pid = pid = find_pid(nr);
hlist_add_head_rcu(&link->node, &pid->tasks[type]);
@@ -252,6 +249,15 @@
free_pid(pid);
}
+/* transfer_pid is an optimization of attach_pid(new), detach_pid(old) */
+void fastcall transfer_pid(struct task_struct *old, struct task_struct *new,
+ enum pid_type type)
+{
+ new->pids[type].pid = old->pids[type].pid;
+ hlist_replace_rcu(&old->pids[type].node, &new->pids[type].node);
+ old->pids[type].pid = NULL;
+}
+
struct task_struct * fastcall pid_task(struct pid *pid, enum pid_type type)
{
struct task_struct *result = NULL;
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 4b6e2f1..825068c 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -64,6 +64,17 @@
CAUTION: this option will cause your machine's real-time clock to be
set to an invalid time after a resume.
+config PM_SYSFS_DEPRECATED
+ bool "Driver model /sys/devices/.../power/state files (DEPRECATED)"
+ depends on PM && SYSFS
+ default n
+ help
+ The driver model started out with a sysfs file intended to provide
+ a userspace hook for device power management. This feature has never
+ worked very well, except for limited testing purposes, and so it will
+ be removed. It's not clear that a generic mechanism could really
+ handle the wide variability of device power states; any replacements
+ are likely to be bus or driver specific.
config SOFTWARE_SUSPEND
bool "Software Suspend"
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 7c7b9b6..d722349 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -103,7 +103,7 @@
}
/**
- * pm_suspend_disk - The granpappy of power management.
+ * pm_suspend_disk - The granpappy of hibernation power management.
*
* If we're going through the firmware, then get it over with quickly.
*
@@ -212,7 +212,7 @@
pr_debug("PM: Preparing devices for restore.\n");
- if ((error = device_suspend(PMSG_FREEZE))) {
+ if ((error = device_suspend(PMSG_PRETHAW))) {
printk("Some devices failed to suspend\n");
swsusp_free();
goto Thaw;
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 8ef677e..0b66659 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -247,6 +247,9 @@
restore_processor_state();
Restore_highmem:
restore_highmem();
+ /* NOTE: device_power_up() is just a resume() for devices
+ * that suspended with irqs off ... no overall powerup.
+ */
device_power_up();
Enable_irqs:
local_irq_enable();
@@ -256,8 +259,12 @@
int swsusp_resume(void)
{
int error;
+
local_irq_disable();
- if (device_power_down(PMSG_FREEZE))
+ /* NOTE: device_power_down() is just a suspend() with irqs off;
+ * it has no special "power things down" semantics
+ */
+ if (device_power_down(PMSG_PRETHAW))
printk(KERN_ERR "Some devices failed to power down, very bad\n");
/* We'll ignore saved state, but this gets preempt count (etc) right */
save_processor_state();
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 2e4499f..72825c8 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -196,7 +196,7 @@
snapshot_free_unused_memory(&data->handle);
down(&pm_sem);
pm_prepare_console();
- error = device_suspend(PMSG_FREEZE);
+ error = device_suspend(PMSG_PRETHAW);
if (!error) {
error = swsusp_resume();
device_resume();
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 9a111f7..8aad033 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -241,60 +241,6 @@
return 0;
}
-/*
- * Access another process' address space.
- * Source/target buffer must be kernel space,
- * Do not walk the page table directly, use get_user_pages
- */
-
-int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write)
-{
- struct mm_struct *mm;
- struct vm_area_struct *vma;
- struct page *page;
- void *old_buf = buf;
-
- mm = get_task_mm(tsk);
- if (!mm)
- return 0;
-
- down_read(&mm->mmap_sem);
- /* ignore errors, just check how much was sucessfully transfered */
- while (len) {
- int bytes, ret, offset;
- void *maddr;
-
- ret = get_user_pages(tsk, mm, addr, 1,
- write, 1, &page, &vma);
- if (ret <= 0)
- break;
-
- bytes = len;
- offset = addr & (PAGE_SIZE-1);
- if (bytes > PAGE_SIZE-offset)
- bytes = PAGE_SIZE-offset;
-
- maddr = kmap(page);
- if (write) {
- copy_to_user_page(vma, page, addr,
- maddr + offset, buf, bytes);
- set_page_dirty_lock(page);
- } else {
- copy_from_user_page(vma, page, addr,
- buf, maddr + offset, bytes);
- }
- kunmap(page);
- page_cache_release(page);
- len -= bytes;
- buf += bytes;
- addr += bytes;
- }
- up_read(&mm->mmap_sem);
- mmput(mm);
-
- return buf - old_buf;
-}
-
int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len)
{
int copied = 0;
diff --git a/kernel/relay.c b/kernel/relay.c
index 33345e7..85786ff 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -669,7 +669,7 @@
*/
static int relay_file_open(struct inode *inode, struct file *filp)
{
- struct rchan_buf *buf = inode->u.generic_ip;
+ struct rchan_buf *buf = inode->i_private;
kref_get(&buf->kref);
filp->private_data = buf;
diff --git a/kernel/resource.c b/kernel/resource.c
index 4628643..9db38a1 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -344,12 +344,11 @@
*
* Returns 0 on success, -EBUSY if the resource can't be inserted.
*
- * This function is equivalent of request_resource when no conflict
+ * This function is equivalent to request_resource when no conflict
* happens. If a conflict happens, and the conflicting resources
* entirely fit within the range of the new resource, then the new
- * resource is inserted and the conflicting resources become childs of
- * the new resource. Otherwise the new resource becomes the child of
- * the conflicting resource
+ * resource is inserted and the conflicting resources become children of
+ * the new resource.
*/
int insert_resource(struct resource *parent, struct resource *new)
{
@@ -357,20 +356,21 @@
struct resource *first, *next;
write_lock(&resource_lock);
- begin:
- result = 0;
- first = __request_resource(parent, new);
- if (!first)
- goto out;
- result = -EBUSY;
- if (first == parent)
- goto out;
+ for (;; parent = first) {
+ result = 0;
+ first = __request_resource(parent, new);
+ if (!first)
+ goto out;
- /* Resource fully contained by the clashing resource? Recurse into it */
- if (first->start <= new->start && first->end >= new->end) {
- parent = first;
- goto begin;
+ result = -EBUSY;
+ if (first == parent)
+ goto out;
+
+ if ((first->start > new->start) || (first->end < new->end))
+ break;
+ if ((first->start == new->start) && (first->end == new->end))
+ break;
}
for (next = first; ; next = next->sibling) {
diff --git a/kernel/signal.c b/kernel/signal.c
index bfdb5686..05853a7 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2577,6 +2577,11 @@
}
#endif /* __ARCH_WANT_SYS_RT_SIGSUSPEND */
+__attribute__((weak)) const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ return NULL;
+}
+
void __init signals_init(void)
{
sigqueue_cachep =
diff --git a/kernel/spinlock.c b/kernel/spinlock.c
index fb524b0..9644a41 100644
--- a/kernel/spinlock.c
+++ b/kernel/spinlock.c
@@ -7,6 +7,11 @@
*
* This file contains the spinlock/rwlock implementations for the
* SMP and the DEBUG_SPINLOCK cases. (UP-nondebug inlines them)
+ *
+ * Note that some architectures have special knowledge about the
+ * stack frames of these functions in their profile_pc. If you
+ * change anything significant here that could change the stack
+ * frame contact the architecture maintainers.
*/
#include <linux/linkage.h>
diff --git a/kernel/sys.c b/kernel/sys.c
index e236f98..3f89477 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -28,6 +28,7 @@
#include <linux/tty.h>
#include <linux/signal.h>
#include <linux/cn_proc.h>
+#include <linux/getcpu.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
@@ -2062,3 +2063,33 @@
}
return error;
}
+
+asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
+ struct getcpu_cache __user *cache)
+{
+ int err = 0;
+ int cpu = raw_smp_processor_id();
+ if (cpup)
+ err |= put_user(cpu, cpup);
+ if (nodep)
+ err |= put_user(cpu_to_node(cpu), nodep);
+ if (cache) {
+ /*
+ * The cache is not needed for this implementation,
+ * but make sure user programs pass something
+ * valid. vsyscall implementations can instead make
+ * good use of the cache. Only use t0 and t1 because
+ * these are available in both 32bit and 64bit ABI (no
+ * need for a compat_getcpu). 32bit has enough
+ * padding
+ */
+ unsigned long t0, t1;
+ get_user(t0, &cache->t0);
+ get_user(t1, &cache->t1);
+ t0++;
+ t1++;
+ put_user(t0, &cache->t0);
+ put_user(t1, &cache->t1);
+ }
+ return err ? -EFAULT : 0;
+}
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index fd43c3e..8bfa7d1 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -76,8 +76,9 @@
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
int unknown_nmi_panic;
-extern int proc_unknown_nmi_panic(ctl_table *, int, struct file *,
- void __user *, size_t *, loff_t *);
+int nmi_watchdog_enabled;
+extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
+ void __user *, size_t *, loff_t *);
#endif
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
@@ -136,8 +137,11 @@
extern int max_lock_depth;
#endif
-static int parse_table(int __user *, int, void __user *, size_t __user *, void __user *, size_t,
- ctl_table *, void **);
+#ifdef CONFIG_SYSCTL_SYSCALL
+static int parse_table(int __user *, int, void __user *, size_t __user *,
+ void __user *, size_t, ctl_table *, void **);
+#endif
+
static int proc_doutsstring(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
@@ -164,7 +168,7 @@
/* /proc declarations: */
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
static ssize_t proc_readsys(struct file *, char __user *, size_t, loff_t *);
static ssize_t proc_writesys(struct file *, const char __user *, size_t, loff_t *);
@@ -628,11 +632,27 @@
.data = &unknown_nmi_panic,
.maxlen = sizeof (int),
.mode = 0644,
- .proc_handler = &proc_unknown_nmi_panic,
+ .proc_handler = &proc_dointvec,
+ },
+ {
+ .ctl_name = KERN_NMI_WATCHDOG,
+ .procname = "nmi_watchdog",
+ .data = &nmi_watchdog_enabled,
+ .maxlen = sizeof (int),
+ .mode = 0644,
+ .proc_handler = &proc_nmi_enabled,
},
#endif
#if defined(CONFIG_X86)
{
+ .ctl_name = KERN_PANIC_ON_NMI,
+ .procname = "panic_on_unrecovered_nmi",
+ .data = &panic_on_unrecovered_nmi,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
+ {
.ctl_name = KERN_BOOTLOADER_TYPE,
.procname = "bootloader_type",
.data = &bootloader_type,
@@ -1149,12 +1169,13 @@
void __init sysctl_init(void)
{
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
register_proc_table(root_table, proc_sys_root, &root_table_header);
init_irq_proc();
#endif
}
+#ifdef CONFIG_SYSCTL_SYSCALL
int do_sysctl(int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
@@ -1208,6 +1229,7 @@
unlock_kernel();
return error;
}
+#endif /* CONFIG_SYSCTL_SYSCALL */
/*
* ctl_perm does NOT grant the superuser all rights automatically, because
@@ -1234,6 +1256,7 @@
return test_perm(table->mode, op);
}
+#ifdef CONFIG_SYSCTL_SYSCALL
static int parse_table(int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen,
@@ -1323,6 +1346,7 @@
}
return 0;
}
+#endif /* CONFIG_SYSCTL_SYSCALL */
/**
* register_sysctl_table - register a sysctl hierarchy
@@ -1410,7 +1434,7 @@
else
list_add_tail(&tmp->ctl_entry, &root_table_header.ctl_entry);
spin_unlock(&sysctl_lock);
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
register_proc_table(table, proc_sys_root, tmp);
#endif
return tmp;
@@ -1428,18 +1452,31 @@
might_sleep();
spin_lock(&sysctl_lock);
start_unregistering(header);
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
unregister_proc_table(header->ctl_table, proc_sys_root);
#endif
spin_unlock(&sysctl_lock);
kfree(header);
}
+#else /* !CONFIG_SYSCTL */
+struct ctl_table_header * register_sysctl_table(ctl_table * table,
+ int insert_at_head)
+{
+ return NULL;
+}
+
+void unregister_sysctl_table(struct ctl_table_header * table)
+{
+}
+
+#endif /* CONFIG_SYSCTL */
+
/*
* /proc/sys support
*/
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
/* Scan the sysctl entries in table and add them all into /proc */
static void register_proc_table(ctl_table * table, struct proc_dir_entry *root, void *set)
@@ -2301,6 +2338,7 @@
#endif /* CONFIG_PROC_FS */
+#ifdef CONFIG_SYSCTL_SYSCALL
/*
* General sysctl support routines
*/
@@ -2443,11 +2481,19 @@
return 1;
}
-#else /* CONFIG_SYSCTL */
+#else /* CONFIG_SYSCTL_SYSCALL */
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
+ static int msg_count;
+
+ if (msg_count < 5) {
+ msg_count++;
+ printk(KERN_INFO
+ "warning: process `%s' used the removed sysctl "
+ "system call\n", current->comm);
+ }
return -ENOSYS;
}
@@ -2479,73 +2525,7 @@
return -ENOSYS;
}
-int proc_dostring(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_dointvec(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_dointvec_bset(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_dointvec_minmax(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_dointvec_jiffies(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_dointvec_userhz_jiffies(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_dointvec_ms_jiffies(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_doulongvec_minmax(ctl_table *table, int write, struct file *filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-int proc_doulongvec_ms_jiffies_minmax(ctl_table *table, int write,
- struct file *filp,
- void __user *buffer,
- size_t *lenp, loff_t *ppos)
-{
- return -ENOSYS;
-}
-
-struct ctl_table_header * register_sysctl_table(ctl_table * table,
- int insert_at_head)
-{
- return NULL;
-}
-
-void unregister_sysctl_table(struct ctl_table_header * table)
-{
-}
-
-#endif /* CONFIG_SYSCTL */
+#endif /* CONFIG_SYSCTL_SYSCALL */
/*
* No sense putting this after each symbol definition, twice,
diff --git a/kernel/unwind.c b/kernel/unwind.c
index f69c804..3430475 100644
--- a/kernel/unwind.c
+++ b/kernel/unwind.c
@@ -603,6 +603,7 @@
#define FRAME_REG(r, t) (((t *)frame)[reg_info[r].offs])
const u32 *fde = NULL, *cie = NULL;
const u8 *ptr = NULL, *end = NULL;
+ unsigned long pc = UNW_PC(frame) - frame->call_frame;
unsigned long startLoc = 0, endLoc = 0, cfa;
unsigned i;
signed ptrType = -1;
@@ -612,7 +613,7 @@
if (UNW_PC(frame) == 0)
return -EINVAL;
- if ((table = find_table(UNW_PC(frame))) != NULL
+ if ((table = find_table(pc)) != NULL
&& !(table->size & (sizeof(*fde) - 1))) {
unsigned long tableSize = table->size;
@@ -647,7 +648,7 @@
ptrType & DW_EH_PE_indirect
? ptrType
: ptrType & (DW_EH_PE_FORM|DW_EH_PE_signed));
- if (UNW_PC(frame) >= startLoc && UNW_PC(frame) < endLoc)
+ if (pc >= startLoc && pc < endLoc)
break;
cie = NULL;
}
@@ -657,16 +658,28 @@
state.cieEnd = ptr; /* keep here temporarily */
ptr = (const u8 *)(cie + 2);
end = (const u8 *)(cie + 1) + *cie;
+ frame->call_frame = 1;
if ((state.version = *ptr) != 1)
cie = NULL; /* unsupported version */
else if (*++ptr) {
/* check if augmentation size is first (and thus present) */
if (*ptr == 'z') {
- /* check for ignorable (or already handled)
- * nul-terminated augmentation string */
- while (++ptr < end && *ptr)
- if (strchr("LPR", *ptr) == NULL)
+ while (++ptr < end && *ptr) {
+ switch(*ptr) {
+ /* check for ignorable (or already handled)
+ * nul-terminated augmentation string */
+ case 'L':
+ case 'P':
+ case 'R':
+ continue;
+ case 'S':
+ frame->call_frame = 0;
+ continue;
+ default:
break;
+ }
+ break;
+ }
}
if (ptr >= end || *ptr)
cie = NULL;
@@ -755,7 +768,7 @@
state.org = startLoc;
memcpy(&state.cfa, &badCFA, sizeof(state.cfa));
/* process instructions */
- if (!processCFI(ptr, end, UNW_PC(frame), ptrType, &state)
+ if (!processCFI(ptr, end, pc, ptrType, &state)
|| state.loc > endLoc
|| state.regs[retAddrReg].where == Nowhere
|| state.cfa.reg >= ARRAY_SIZE(reg_info)
@@ -763,6 +776,11 @@
|| state.cfa.offs % sizeof(unsigned long))
return -EIO;
/* update frame */
+#ifndef CONFIG_AS_CFI_SIGNAL_FRAME
+ if(frame->call_frame
+ && !UNW_DEFAULT_RA(state.regs[retAddrReg], state.dataAlign))
+ frame->call_frame = 0;
+#endif
cfa = FRAME_REG(state.cfa.reg, unsigned long) + state.cfa.offs;
startLoc = min((unsigned long)UNW_SP(frame), cfa);
endLoc = max((unsigned long)UNW_SP(frame), cfa);
@@ -866,6 +884,7 @@
/*const*/ struct pt_regs *regs)
{
info->task = tsk;
+ info->call_frame = 0;
arch_unw_init_frame_info(info, regs);
return 0;
@@ -879,6 +898,7 @@
struct task_struct *tsk)
{
info->task = tsk;
+ info->call_frame = 0;
arch_unw_init_blocked(info);
return 0;
@@ -894,6 +914,7 @@
void *arg)
{
info->task = current;
+ info->call_frame = 0;
return arch_unwind_init_running(info, callback, arg);
}
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 3f21cc7..b0f5ca7 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -8,6 +8,13 @@
operations. This is useful for identifying long delays
in kernel startup.
+config ENABLE_MUST_CHECK
+ bool "Enable __must_check logic"
+ default y
+ help
+ Enable the __must_check logic in the kernel build. Disable this to
+ suppress the "warning: ignoring return value of 'foo', declared with
+ attribute warn_unused_result" messages.
config MAGIC_SYSRQ
bool "Magic SysRq key"
@@ -218,7 +225,7 @@
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER
+ select FRAME_POINTER if !X86
select KALLSYMS
select KALLSYMS_ALL
@@ -277,7 +284,7 @@
config DEBUG_BUGVERBOSE
bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
depends on BUG
- depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || X86_32 || FRV
+ depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || X86_32 || FRV || SUPERH
default !EMBEDDED
help
Say Y here to make BUG() panics output the file name and line number
@@ -315,7 +322,7 @@
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32)
+ depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
diff --git a/lib/hweight.c b/lib/hweight.c
index 4382576..360556a 100644
--- a/lib/hweight.c
+++ b/lib/hweight.c
@@ -1,5 +1,6 @@
#include <linux/module.h>
#include <asm/types.h>
+#include <asm/bitops.h>
/**
* hweightN - returns the hamming weight of a N-bit word
@@ -40,14 +41,19 @@
#if BITS_PER_LONG == 32
return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w);
#elif BITS_PER_LONG == 64
+#ifdef ARCH_HAS_FAST_MULTIPLIER
+ w -= (w >> 1) & 0x5555555555555555ul;
+ w = (w & 0x3333333333333333ul) + ((w >> 2) & 0x3333333333333333ul);
+ w = (w + (w >> 4)) & 0x0f0f0f0f0f0f0f0ful;
+ return (w * 0x0101010101010101ul) >> 56;
+#else
__u64 res = w - ((w >> 1) & 0x5555555555555555ul);
res = (res & 0x3333333333333333ul) + ((res >> 2) & 0x3333333333333333ul);
res = (res + (res >> 4)) & 0x0F0F0F0F0F0F0F0Ful;
res = res + (res >> 8);
res = res + (res >> 16);
return (res + (res >> 32)) & 0x00000000000000FFul;
-#else
-#error BITS_PER_LONG not defined
+#endif
#endif
}
EXPORT_SYMBOL(hweight64);
diff --git a/lib/klist.c b/lib/klist.c
index 9c94f0b..120bd17 100644
--- a/lib/klist.c
+++ b/lib/klist.c
@@ -123,12 +123,10 @@
static void klist_release(struct kref * kref)
{
struct klist_node * n = container_of(kref, struct klist_node, n_ref);
- void (*put)(struct klist_node *) = n->n_klist->put;
+
list_del(&n->n_node);
complete(&n->n_removed);
n->n_klist = NULL;
- if (put)
- put(n);
}
static int klist_dec_and_del(struct klist_node * n)
@@ -145,10 +143,14 @@
void klist_del(struct klist_node * n)
{
struct klist * k = n->n_klist;
+ void (*put)(struct klist_node *) = k->put;
spin_lock(&k->k_lock);
- klist_dec_and_del(n);
+ if (!klist_dec_and_del(n))
+ put = NULL;
spin_unlock(&k->k_lock);
+ if (put)
+ put(n);
}
EXPORT_SYMBOL_GPL(klist_del);
@@ -161,10 +163,7 @@
void klist_remove(struct klist_node * n)
{
- struct klist * k = n->n_klist;
- spin_lock(&k->k_lock);
- klist_dec_and_del(n);
- spin_unlock(&k->k_lock);
+ klist_del(n);
wait_for_completion(&n->n_removed);
}
@@ -260,12 +259,15 @@
struct klist_node * klist_next(struct klist_iter * i)
{
struct list_head * next;
+ struct klist_node * lnode = i->i_cur;
struct klist_node * knode = NULL;
+ void (*put)(struct klist_node *) = i->i_klist->put;
spin_lock(&i->i_klist->k_lock);
- if (i->i_cur) {
- next = i->i_cur->n_node.next;
- klist_dec_and_del(i->i_cur);
+ if (lnode) {
+ next = lnode->n_node.next;
+ if (!klist_dec_and_del(lnode))
+ put = NULL;
} else
next = i->i_head->next;
@@ -275,6 +277,8 @@
}
i->i_cur = knode;
spin_unlock(&i->i_klist->k_lock);
+ if (put && lnode)
+ put(lnode);
return knode;
}
diff --git a/lib/kobject.c b/lib/kobject.c
index 8e7c719..1699eb9 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -407,6 +407,7 @@
struct kobject *kobject_add_dir(struct kobject *parent, const char *name)
{
struct kobject *k;
+ int ret;
if (!parent)
return NULL;
@@ -418,7 +419,13 @@
k->parent = parent;
k->ktype = &dir_ktype;
kobject_set_name(k, name);
- kobject_register(k);
+ ret = kobject_register(k);
+ if (ret < 0) {
+ printk(KERN_WARNING "kobject_add_dir: "
+ "kobject_register error: %d\n", ret);
+ kobject_del(k);
+ return NULL;
+ }
return k;
}
diff --git a/mm/memory.c b/mm/memory.c
index 92a3ebd..601159a 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2256,6 +2256,54 @@
}
/*
+ * do_no_pfn() tries to create a new page mapping for a page without
+ * a struct_page backing it
+ *
+ * As this is called only for pages that do not currently exist, we
+ * do not need to flush old virtual caches or the TLB.
+ *
+ * We enter with non-exclusive mmap_sem (to exclude vma changes,
+ * but allow concurrent faults), and pte mapped but not yet locked.
+ * We return with mmap_sem still held, but pte unmapped and unlocked.
+ *
+ * It is expected that the ->nopfn handler always returns the same pfn
+ * for a given virtual mapping.
+ *
+ * Mark this `noinline' to prevent it from bloating the main pagefault code.
+ */
+static noinline int do_no_pfn(struct mm_struct *mm, struct vm_area_struct *vma,
+ unsigned long address, pte_t *page_table, pmd_t *pmd,
+ int write_access)
+{
+ spinlock_t *ptl;
+ pte_t entry;
+ unsigned long pfn;
+ int ret = VM_FAULT_MINOR;
+
+ pte_unmap(page_table);
+ BUG_ON(!(vma->vm_flags & VM_PFNMAP));
+ BUG_ON(is_cow_mapping(vma->vm_flags));
+
+ pfn = vma->vm_ops->nopfn(vma, address & PAGE_MASK);
+ if (pfn == NOPFN_OOM)
+ return VM_FAULT_OOM;
+ if (pfn == NOPFN_SIGBUS)
+ return VM_FAULT_SIGBUS;
+
+ page_table = pte_offset_map_lock(mm, pmd, address, &ptl);
+
+ /* Only go through if we didn't race with anybody else... */
+ if (pte_none(*page_table)) {
+ entry = pfn_pte(pfn, vma->vm_page_prot);
+ if (write_access)
+ entry = maybe_mkwrite(pte_mkdirty(entry), vma);
+ set_pte_at(mm, address, page_table, entry);
+ }
+ pte_unmap_unlock(page_table, ptl);
+ return ret;
+}
+
+/*
* Fault of a previously existing named mapping. Repopulate the pte
* from the encoded file_pte if possible. This enables swappable
* nonlinear vmas.
@@ -2317,11 +2365,17 @@
old_entry = entry = *pte;
if (!pte_present(entry)) {
if (pte_none(entry)) {
- if (!vma->vm_ops || !vma->vm_ops->nopage)
- return do_anonymous_page(mm, vma, address,
- pte, pmd, write_access);
- return do_no_page(mm, vma, address,
- pte, pmd, write_access);
+ if (vma->vm_ops) {
+ if (vma->vm_ops->nopage)
+ return do_no_page(mm, vma, address,
+ pte, pmd,
+ write_access);
+ if (unlikely(vma->vm_ops->nopfn))
+ return do_no_pfn(mm, vma, address, pte,
+ pmd, write_access);
+ }
+ return do_anonymous_page(mm, vma, address,
+ pte, pmd, write_access);
}
if (pte_file(entry))
return do_file_page(mm, vma, address,
@@ -2550,3 +2604,56 @@
}
#endif /* __HAVE_ARCH_GATE_AREA */
+
+/*
+ * Access another process' address space.
+ * Source/target buffer must be kernel space,
+ * Do not walk the page table directly, use get_user_pages
+ */
+int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write)
+{
+ struct mm_struct *mm;
+ struct vm_area_struct *vma;
+ struct page *page;
+ void *old_buf = buf;
+
+ mm = get_task_mm(tsk);
+ if (!mm)
+ return 0;
+
+ down_read(&mm->mmap_sem);
+ /* ignore errors, just check how much was sucessfully transfered */
+ while (len) {
+ int bytes, ret, offset;
+ void *maddr;
+
+ ret = get_user_pages(tsk, mm, addr, 1,
+ write, 1, &page, &vma);
+ if (ret <= 0)
+ break;
+
+ bytes = len;
+ offset = addr & (PAGE_SIZE-1);
+ if (bytes > PAGE_SIZE-offset)
+ bytes = PAGE_SIZE-offset;
+
+ maddr = kmap(page);
+ if (write) {
+ copy_to_user_page(vma, page, addr,
+ maddr + offset, buf, bytes);
+ set_page_dirty_lock(page);
+ } else {
+ copy_from_user_page(vma, page, addr,
+ buf, maddr + offset, bytes);
+ }
+ kunmap(page);
+ page_cache_release(page);
+ len -= bytes;
+ buf += bytes;
+ addr += bytes;
+ }
+ up_read(&mm->mmap_sem);
+ mmput(mm);
+
+ return buf - old_buf;
+}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 38f8965..cf18f09 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1136,7 +1136,9 @@
*/
unsigned slab_node(struct mempolicy *policy)
{
- switch (policy->policy) {
+ int pol = policy ? policy->policy : MPOL_DEFAULT;
+
+ switch (pol) {
case MPOL_INTERLEAVE:
return interleave_nodes(policy);
diff --git a/mm/nommu.c b/mm/nommu.c
index d99dea3..5645406 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -122,26 +122,50 @@
}
/*
- * The nommu dodgy version :-)
+ * get a list of pages in an address range belonging to the specified process
+ * and indicate the VMA that covers each page
+ * - this is potentially dodgy as we may end incrementing the page count of a
+ * slab page or a secondary page from a compound page
+ * - don't permit access to VMAs that don't support it, such as I/O mappings
*/
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, int len, int write, int force,
struct page **pages, struct vm_area_struct **vmas)
{
+ struct vm_area_struct *vma;
+ unsigned long vm_flags;
int i;
- static struct vm_area_struct dummy_vma;
+
+ /* calculate required read or write permissions.
+ * - if 'force' is set, we only require the "MAY" flags.
+ */
+ vm_flags = write ? (VM_WRITE | VM_MAYWRITE) : (VM_READ | VM_MAYREAD);
+ vm_flags &= force ? (VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
for (i = 0; i < len; i++) {
+ vma = find_vma(mm, start);
+ if (!vma)
+ goto finish_or_fault;
+
+ /* protect what we can, including chardevs */
+ if (vma->vm_flags & (VM_IO | VM_PFNMAP) ||
+ !(vm_flags & vma->vm_flags))
+ goto finish_or_fault;
+
if (pages) {
pages[i] = virt_to_page(start);
if (pages[i])
page_cache_get(pages[i]);
}
if (vmas)
- vmas[i] = &dummy_vma;
+ vmas[i] = vma;
start += PAGE_SIZE;
}
- return(i);
+
+ return i;
+
+finish_or_fault:
+ return i ? : -EFAULT;
}
EXPORT_SYMBOL(get_user_pages);
@@ -286,6 +310,77 @@
}
#endif /* DEBUG */
+/*
+ * add a VMA into a process's mm_struct in the appropriate place in the list
+ * - should be called with mm->mmap_sem held writelocked
+ */
+static void add_vma_to_mm(struct mm_struct *mm, struct vm_list_struct *vml)
+{
+ struct vm_list_struct **ppv;
+
+ for (ppv = ¤t->mm->context.vmlist; *ppv; ppv = &(*ppv)->next)
+ if ((*ppv)->vma->vm_start > vml->vma->vm_start)
+ break;
+
+ vml->next = *ppv;
+ *ppv = vml;
+}
+
+/*
+ * look up the first VMA in which addr resides, NULL if none
+ * - should be called with mm->mmap_sem at least held readlocked
+ */
+struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr)
+{
+ struct vm_list_struct *loop, *vml;
+
+ /* search the vm_start ordered list */
+ vml = NULL;
+ for (loop = mm->context.vmlist; loop; loop = loop->next) {
+ if (loop->vma->vm_start > addr)
+ break;
+ vml = loop;
+ }
+
+ if (vml && vml->vma->vm_end > addr)
+ return vml->vma;
+
+ return NULL;
+}
+EXPORT_SYMBOL(find_vma);
+
+/*
+ * find a VMA
+ * - we don't extend stack VMAs under NOMMU conditions
+ */
+struct vm_area_struct *find_extend_vma(struct mm_struct *mm, unsigned long addr)
+{
+ return find_vma(mm, addr);
+}
+
+/*
+ * look up the first VMA exactly that exactly matches addr
+ * - should be called with mm->mmap_sem at least held readlocked
+ */
+static inline struct vm_area_struct *find_vma_exact(struct mm_struct *mm,
+ unsigned long addr)
+{
+ struct vm_list_struct *vml;
+
+ /* search the vm_start ordered list */
+ for (vml = mm->context.vmlist; vml; vml = vml->next) {
+ if (vml->vma->vm_start == addr)
+ return vml->vma;
+ if (vml->vma->vm_start > addr)
+ break;
+ }
+
+ return NULL;
+}
+
+/*
+ * find a VMA in the global tree
+ */
static inline struct vm_area_struct *find_nommu_vma(unsigned long start)
{
struct vm_area_struct *vma;
@@ -305,6 +400,9 @@
return NULL;
}
+/*
+ * add a VMA in the global tree
+ */
static void add_nommu_vma(struct vm_area_struct *vma)
{
struct vm_area_struct *pvma;
@@ -351,6 +449,9 @@
rb_insert_color(&vma->vm_rb, &nommu_vma_tree);
}
+/*
+ * delete a VMA from the global list
+ */
static void delete_nommu_vma(struct vm_area_struct *vma)
{
struct address_space *mapping;
@@ -828,8 +929,7 @@
realalloc += kobjsize(vml);
askedalloc += sizeof(*vml);
- vml->next = current->mm->context.vmlist;
- current->mm->context.vmlist = vml;
+ add_vma_to_mm(current->mm, vml);
up_write(&nommu_vma_sem);
@@ -908,6 +1008,11 @@
}
}
+/*
+ * release a mapping
+ * - under NOMMU conditions the parameters must match exactly to the mapping to
+ * be removed
+ */
int do_munmap(struct mm_struct *mm, unsigned long addr, size_t len)
{
struct vm_list_struct *vml, **parent;
@@ -917,10 +1022,13 @@
printk("do_munmap:\n");
#endif
- for (parent = &mm->context.vmlist; *parent; parent = &(*parent)->next)
+ for (parent = &mm->context.vmlist; *parent; parent = &(*parent)->next) {
+ if ((*parent)->vma->vm_start > addr)
+ break;
if ((*parent)->vma->vm_start == addr &&
((len == 0) || ((*parent)->vma->vm_end == end)))
goto found;
+ }
printk("munmap of non-mmaped memory by process %d (%s): %p\n",
current->pid, current->comm, (void *) addr);
@@ -946,7 +1054,20 @@
return 0;
}
-/* Release all mmaps. */
+asmlinkage long sys_munmap(unsigned long addr, size_t len)
+{
+ int ret;
+ struct mm_struct *mm = current->mm;
+
+ down_write(&mm->mmap_sem);
+ ret = do_munmap(mm, addr, len);
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+
+/*
+ * Release all mappings
+ */
void exit_mmap(struct mm_struct * mm)
{
struct vm_list_struct *tmp;
@@ -973,37 +1094,26 @@
}
}
-asmlinkage long sys_munmap(unsigned long addr, size_t len)
-{
- int ret;
- struct mm_struct *mm = current->mm;
-
- down_write(&mm->mmap_sem);
- ret = do_munmap(mm, addr, len);
- up_write(&mm->mmap_sem);
- return ret;
-}
-
unsigned long do_brk(unsigned long addr, unsigned long len)
{
return -ENOMEM;
}
/*
- * Expand (or shrink) an existing mapping, potentially moving it at the
- * same time (controlled by the MREMAP_MAYMOVE flag and available VM space)
+ * expand (or shrink) an existing mapping, potentially moving it at the same
+ * time (controlled by the MREMAP_MAYMOVE flag and available VM space)
*
- * MREMAP_FIXED option added 5-Dec-1999 by Benjamin LaHaise
- * This option implies MREMAP_MAYMOVE.
+ * under NOMMU conditions, we only permit changing a mapping's size, and only
+ * as long as it stays within the hole allocated by the kmalloc() call in
+ * do_mmap_pgoff() and the block is not shareable
*
- * on uClinux, we only permit changing a mapping's size, and only as long as it stays within the
- * hole allocated by the kmalloc() call in do_mmap_pgoff() and the block is not shareable
+ * MREMAP_FIXED is not supported under NOMMU conditions
*/
unsigned long do_mremap(unsigned long addr,
unsigned long old_len, unsigned long new_len,
unsigned long flags, unsigned long new_addr)
{
- struct vm_list_struct *vml = NULL;
+ struct vm_area_struct *vma;
/* insanity checks first */
if (new_len == 0)
@@ -1012,58 +1122,46 @@
if (flags & MREMAP_FIXED && new_addr != addr)
return (unsigned long) -EINVAL;
- for (vml = current->mm->context.vmlist; vml; vml = vml->next)
- if (vml->vma->vm_start == addr)
- goto found;
+ vma = find_vma_exact(current->mm, addr);
+ if (!vma)
+ return (unsigned long) -EINVAL;
- return (unsigned long) -EINVAL;
-
- found:
- if (vml->vma->vm_end != vml->vma->vm_start + old_len)
+ if (vma->vm_end != vma->vm_start + old_len)
return (unsigned long) -EFAULT;
- if (vml->vma->vm_flags & VM_MAYSHARE)
+ if (vma->vm_flags & VM_MAYSHARE)
return (unsigned long) -EPERM;
if (new_len > kobjsize((void *) addr))
return (unsigned long) -ENOMEM;
/* all checks complete - do it */
- vml->vma->vm_end = vml->vma->vm_start + new_len;
+ vma->vm_end = vma->vm_start + new_len;
askedalloc -= old_len;
askedalloc += new_len;
- return vml->vma->vm_start;
+ return vma->vm_start;
}
-/*
- * Look up the first VMA which satisfies addr < vm_end, NULL if none
- */
-struct vm_area_struct *find_vma(struct mm_struct *mm, unsigned long addr)
+asmlinkage unsigned long sys_mremap(unsigned long addr,
+ unsigned long old_len, unsigned long new_len,
+ unsigned long flags, unsigned long new_addr)
{
- struct vm_list_struct *vml;
+ unsigned long ret;
- for (vml = mm->context.vmlist; vml; vml = vml->next)
- if (addr >= vml->vma->vm_start && addr < vml->vma->vm_end)
- return vml->vma;
-
- return NULL;
+ down_write(¤t->mm->mmap_sem);
+ ret = do_mremap(addr, old_len, new_len, flags, new_addr);
+ up_write(¤t->mm->mmap_sem);
+ return ret;
}
-EXPORT_SYMBOL(find_vma);
-
struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
unsigned int foll_flags)
{
return NULL;
}
-struct vm_area_struct *find_extend_vma(struct mm_struct *mm, unsigned long addr)
-{
- return NULL;
-}
-
int remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
unsigned long to, unsigned long size, pgprot_t prot)
{
@@ -1206,3 +1304,44 @@
BUG();
return NULL;
}
+
+/*
+ * Access another process' address space.
+ * - source/target buffer must be kernel space
+ */
+int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm;
+
+ if (addr + len < addr)
+ return 0;
+
+ mm = get_task_mm(tsk);
+ if (!mm)
+ return 0;
+
+ down_read(&mm->mmap_sem);
+
+ /* the access must start within one of the target process's mappings */
+ vma = find_vma(mm, addr);
+ if (vma) {
+ /* don't overrun this mapping */
+ if (addr + len >= vma->vm_end)
+ len = vma->vm_end - addr;
+
+ /* only read or write mappings where it is permitted */
+ if (write && vma->vm_flags & VM_MAYWRITE)
+ len -= copy_to_user((void *) addr, buf, len);
+ else if (!write && vma->vm_flags & VM_MAYREAD)
+ len -= copy_from_user(buf, (void *) addr, len);
+ else
+ len = 0;
+ } else {
+ len = 0;
+ }
+
+ up_read(&mm->mmap_sem);
+ mmput(mm);
+ return len;
+}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 9810f0a..4f59d90 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -37,6 +37,8 @@
#include <linux/vmalloc.h>
#include <linux/mempolicy.h>
#include <linux/stop_machine.h>
+#include <linux/sort.h>
+#include <linux/pfn.h>
#include <asm/tlbflush.h>
#include <asm/div64.h>
@@ -102,6 +104,38 @@
unsigned long __meminitdata nr_kernel_pages;
unsigned long __meminitdata nr_all_pages;
+static unsigned long __initdata dma_reserve;
+
+#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
+ /*
+ * MAX_ACTIVE_REGIONS determines the maxmimum number of distinct
+ * ranges of memory (RAM) that may be registered with add_active_range().
+ * Ranges passed to add_active_range() will be merged if possible
+ * so the number of times add_active_range() can be called is
+ * related to the number of nodes and the number of holes
+ */
+ #ifdef CONFIG_MAX_ACTIVE_REGIONS
+ /* Allow an architecture to set MAX_ACTIVE_REGIONS to save memory */
+ #define MAX_ACTIVE_REGIONS CONFIG_MAX_ACTIVE_REGIONS
+ #else
+ #if MAX_NUMNODES >= 32
+ /* If there can be many nodes, allow up to 50 holes per node */
+ #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
+ #else
+ /* By default, allow up to 256 distinct regions */
+ #define MAX_ACTIVE_REGIONS 256
+ #endif
+ #endif
+
+ struct node_active_region __initdata early_node_map[MAX_ACTIVE_REGIONS];
+ int __initdata nr_nodemap_entries;
+ unsigned long __initdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
+ unsigned long __initdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
+#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
+ unsigned long __initdata node_boundary_start_pfn[MAX_NUMNODES];
+ unsigned long __initdata node_boundary_end_pfn[MAX_NUMNODES];
+#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
+#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
#ifdef CONFIG_DEBUG_VM
static int page_outside_zone_boundaries(struct zone *zone, struct page *page)
@@ -908,7 +942,7 @@
*/
do {
zone = *z;
- if (unlikely((gfp_mask & __GFP_THISNODE) &&
+ if (unlikely(NUMA_BUILD && (gfp_mask & __GFP_THISNODE) &&
zone->zone_pgdat != zonelist->zones[0]->zone_pgdat))
break;
if ((alloc_flags & ALLOC_CPUSET) &&
@@ -1222,14 +1256,12 @@
{
return nr_free_zone_pages(gfp_zone(GFP_HIGHUSER));
}
-#ifdef CONFIG_NUMA
-static void show_node(struct zone *zone)
+
+static inline void show_node(struct zone *zone)
{
- printk("Node %ld ", zone_to_nid(zone));
+ if (NUMA_BUILD)
+ printk("Node %ld ", zone_to_nid(zone));
}
-#else
-#define show_node(zone) do { } while (0)
-#endif
void si_meminfo(struct sysinfo *val)
{
@@ -1271,34 +1303,30 @@
*/
void show_free_areas(void)
{
- int cpu, temperature;
+ int cpu;
unsigned long active;
unsigned long inactive;
unsigned long free;
struct zone *zone;
for_each_zone(zone) {
- show_node(zone);
- printk("%s per-cpu:", zone->name);
-
- if (!populated_zone(zone)) {
- printk(" empty\n");
+ if (!populated_zone(zone))
continue;
- } else
- printk("\n");
+
+ show_node(zone);
+ printk("%s per-cpu:\n", zone->name);
for_each_online_cpu(cpu) {
struct per_cpu_pageset *pageset;
pageset = zone_pcp(zone, cpu);
- for (temperature = 0; temperature < 2; temperature++)
- printk("cpu %d %s: high %d, batch %d used:%d\n",
- cpu,
- temperature ? "cold" : "hot",
- pageset->pcp[temperature].high,
- pageset->pcp[temperature].batch,
- pageset->pcp[temperature].count);
+ printk("CPU %4d: Hot: hi:%5d, btch:%4d usd:%4d "
+ "Cold: hi:%5d, btch:%4d usd:%4d\n",
+ cpu, pageset->pcp[0].high,
+ pageset->pcp[0].batch, pageset->pcp[0].count,
+ pageset->pcp[1].high, pageset->pcp[1].batch,
+ pageset->pcp[1].count);
}
}
@@ -1320,6 +1348,9 @@
for_each_zone(zone) {
int i;
+ if (!populated_zone(zone))
+ continue;
+
show_node(zone);
printk("%s"
" free:%lukB"
@@ -1352,12 +1383,11 @@
for_each_zone(zone) {
unsigned long nr[MAX_ORDER], flags, order, total = 0;
+ if (!populated_zone(zone))
+ continue;
+
show_node(zone);
printk("%s: ", zone->name);
- if (!populated_zone(zone)) {
- printk("empty\n");
- continue;
- }
spin_lock_irqsave(&zone->lock, flags);
for (order = 0; order < MAX_ORDER; order++) {
@@ -1561,7 +1591,7 @@
void __meminit build_all_zonelists(void)
{
if (system_state == SYSTEM_BOOTING) {
- __build_all_zonelists(0);
+ __build_all_zonelists(NULL);
cpuset_init_current_mems_allowed();
} else {
/* we have to stop all cpus to guaranntee there is no user
@@ -1642,25 +1672,6 @@
#define LONG_ALIGN(x) (((x)+(sizeof(long))-1)&~((sizeof(long))-1))
-static void __init calculate_zone_totalpages(struct pglist_data *pgdat,
- unsigned long *zones_size, unsigned long *zholes_size)
-{
- unsigned long realtotalpages, totalpages = 0;
- enum zone_type i;
-
- for (i = 0; i < MAX_NR_ZONES; i++)
- totalpages += zones_size[i];
- pgdat->node_spanned_pages = totalpages;
-
- realtotalpages = totalpages;
- if (zholes_size)
- for (i = 0; i < MAX_NR_ZONES; i++)
- realtotalpages -= zholes_size[i];
- pgdat->node_present_pages = realtotalpages;
- printk(KERN_DEBUG "On node %d totalpages: %lu\n", pgdat->node_id, realtotalpages);
-}
-
-
/*
* Initially all pages are reserved - free ones are freed
* up by free_all_bootmem() once the early boot process is
@@ -1818,6 +1829,9 @@
for_each_zone(zone) {
+ if (!populated_zone(zone))
+ continue;
+
zone_pcp(zone, cpu) = kmalloc_node(sizeof(struct per_cpu_pageset),
GFP_KERNEL, cpu_to_node(cpu));
if (!zone_pcp(zone, cpu))
@@ -1977,6 +1991,366 @@
return 0;
}
+#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
+/*
+ * Basic iterator support. Return the first range of PFNs for a node
+ * Note: nid == MAX_NUMNODES returns first region regardless of node
+ */
+static int __init first_active_region_index_in_nid(int nid)
+{
+ int i;
+
+ for (i = 0; i < nr_nodemap_entries; i++)
+ if (nid == MAX_NUMNODES || early_node_map[i].nid == nid)
+ return i;
+
+ return -1;
+}
+
+/*
+ * Basic iterator support. Return the next active range of PFNs for a node
+ * Note: nid == MAX_NUMNODES returns next region regardles of node
+ */
+static int __init next_active_region_index_in_nid(int index, int nid)
+{
+ for (index = index + 1; index < nr_nodemap_entries; index++)
+ if (nid == MAX_NUMNODES || early_node_map[index].nid == nid)
+ return index;
+
+ return -1;
+}
+
+#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+/*
+ * Required by SPARSEMEM. Given a PFN, return what node the PFN is on.
+ * Architectures may implement their own version but if add_active_range()
+ * was used and there are no special requirements, this is a convenient
+ * alternative
+ */
+int __init early_pfn_to_nid(unsigned long pfn)
+{
+ int i;
+
+ for (i = 0; i < nr_nodemap_entries; i++) {
+ unsigned long start_pfn = early_node_map[i].start_pfn;
+ unsigned long end_pfn = early_node_map[i].end_pfn;
+
+ if (start_pfn <= pfn && pfn < end_pfn)
+ return early_node_map[i].nid;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+
+/* Basic iterator support to walk early_node_map[] */
+#define for_each_active_range_index_in_nid(i, nid) \
+ for (i = first_active_region_index_in_nid(nid); i != -1; \
+ i = next_active_region_index_in_nid(i, nid))
+
+/**
+ * free_bootmem_with_active_regions - Call free_bootmem_node for each active range
+ * @nid: The node to free memory on. If MAX_NUMNODES, all nodes are freed
+ * @max_low_pfn: The highest PFN that till be passed to free_bootmem_node
+ *
+ * If an architecture guarantees that all ranges registered with
+ * add_active_ranges() contain no holes and may be freed, this
+ * this function may be used instead of calling free_bootmem() manually.
+ */
+void __init free_bootmem_with_active_regions(int nid,
+ unsigned long max_low_pfn)
+{
+ int i;
+
+ for_each_active_range_index_in_nid(i, nid) {
+ unsigned long size_pages = 0;
+ unsigned long end_pfn = early_node_map[i].end_pfn;
+
+ if (early_node_map[i].start_pfn >= max_low_pfn)
+ continue;
+
+ if (end_pfn > max_low_pfn)
+ end_pfn = max_low_pfn;
+
+ size_pages = end_pfn - early_node_map[i].start_pfn;
+ free_bootmem_node(NODE_DATA(early_node_map[i].nid),
+ PFN_PHYS(early_node_map[i].start_pfn),
+ size_pages << PAGE_SHIFT);
+ }
+}
+
+/**
+ * sparse_memory_present_with_active_regions - Call memory_present for each active range
+ * @nid: The node to call memory_present for. If MAX_NUMNODES, all nodes will be used
+ *
+ * If an architecture guarantees that all ranges registered with
+ * add_active_ranges() contain no holes and may be freed, this
+ * this function may be used instead of calling memory_present() manually.
+ */
+void __init sparse_memory_present_with_active_regions(int nid)
+{
+ int i;
+
+ for_each_active_range_index_in_nid(i, nid)
+ memory_present(early_node_map[i].nid,
+ early_node_map[i].start_pfn,
+ early_node_map[i].end_pfn);
+}
+
+/**
+ * push_node_boundaries - Push node boundaries to at least the requested boundary
+ * @nid: The nid of the node to push the boundary for
+ * @start_pfn: The start pfn of the node
+ * @end_pfn: The end pfn of the node
+ *
+ * In reserve-based hot-add, mem_map is allocated that is unused until hotadd
+ * time. Specifically, on x86_64, SRAT will report ranges that can potentially
+ * be hotplugged even though no physical memory exists. This function allows
+ * an arch to push out the node boundaries so mem_map is allocated that can
+ * be used later.
+ */
+#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
+void __init push_node_boundaries(unsigned int nid,
+ unsigned long start_pfn, unsigned long end_pfn)
+{
+ printk(KERN_DEBUG "Entering push_node_boundaries(%u, %lu, %lu)\n",
+ nid, start_pfn, end_pfn);
+
+ /* Initialise the boundary for this node if necessary */
+ if (node_boundary_end_pfn[nid] == 0)
+ node_boundary_start_pfn[nid] = -1UL;
+
+ /* Update the boundaries */
+ if (node_boundary_start_pfn[nid] > start_pfn)
+ node_boundary_start_pfn[nid] = start_pfn;
+ if (node_boundary_end_pfn[nid] < end_pfn)
+ node_boundary_end_pfn[nid] = end_pfn;
+}
+
+/* If necessary, push the node boundary out for reserve hotadd */
+static void __init account_node_boundary(unsigned int nid,
+ unsigned long *start_pfn, unsigned long *end_pfn)
+{
+ printk(KERN_DEBUG "Entering account_node_boundary(%u, %lu, %lu)\n",
+ nid, *start_pfn, *end_pfn);
+
+ /* Return if boundary information has not been provided */
+ if (node_boundary_end_pfn[nid] == 0)
+ return;
+
+ /* Check the boundaries and update if necessary */
+ if (node_boundary_start_pfn[nid] < *start_pfn)
+ *start_pfn = node_boundary_start_pfn[nid];
+ if (node_boundary_end_pfn[nid] > *end_pfn)
+ *end_pfn = node_boundary_end_pfn[nid];
+}
+#else
+void __init push_node_boundaries(unsigned int nid,
+ unsigned long start_pfn, unsigned long end_pfn) {}
+
+static void __init account_node_boundary(unsigned int nid,
+ unsigned long *start_pfn, unsigned long *end_pfn) {}
+#endif
+
+
+/**
+ * get_pfn_range_for_nid - Return the start and end page frames for a node
+ * @nid: The nid to return the range for. If MAX_NUMNODES, the min and max PFN are returned
+ * @start_pfn: Passed by reference. On return, it will have the node start_pfn
+ * @end_pfn: Passed by reference. On return, it will have the node end_pfn
+ *
+ * It returns the start and end page frame of a node based on information
+ * provided by an arch calling add_active_range(). If called for a node
+ * with no available memory, a warning is printed and the start and end
+ * PFNs will be 0
+ */
+void __init get_pfn_range_for_nid(unsigned int nid,
+ unsigned long *start_pfn, unsigned long *end_pfn)
+{
+ int i;
+ *start_pfn = -1UL;
+ *end_pfn = 0;
+
+ for_each_active_range_index_in_nid(i, nid) {
+ *start_pfn = min(*start_pfn, early_node_map[i].start_pfn);
+ *end_pfn = max(*end_pfn, early_node_map[i].end_pfn);
+ }
+
+ if (*start_pfn == -1UL) {
+ printk(KERN_WARNING "Node %u active with no memory\n", nid);
+ *start_pfn = 0;
+ }
+
+ /* Push the node boundaries out if requested */
+ account_node_boundary(nid, start_pfn, end_pfn);
+}
+
+/*
+ * Return the number of pages a zone spans in a node, including holes
+ * present_pages = zone_spanned_pages_in_node() - zone_absent_pages_in_node()
+ */
+unsigned long __init zone_spanned_pages_in_node(int nid,
+ unsigned long zone_type,
+ unsigned long *ignored)
+{
+ unsigned long node_start_pfn, node_end_pfn;
+ unsigned long zone_start_pfn, zone_end_pfn;
+
+ /* Get the start and end of the node and zone */
+ get_pfn_range_for_nid(nid, &node_start_pfn, &node_end_pfn);
+ zone_start_pfn = arch_zone_lowest_possible_pfn[zone_type];
+ zone_end_pfn = arch_zone_highest_possible_pfn[zone_type];
+
+ /* Check that this node has pages within the zone's required range */
+ if (zone_end_pfn < node_start_pfn || zone_start_pfn > node_end_pfn)
+ return 0;
+
+ /* Move the zone boundaries inside the node if necessary */
+ zone_end_pfn = min(zone_end_pfn, node_end_pfn);
+ zone_start_pfn = max(zone_start_pfn, node_start_pfn);
+
+ /* Return the spanned pages */
+ return zone_end_pfn - zone_start_pfn;
+}
+
+/*
+ * Return the number of holes in a range on a node. If nid is MAX_NUMNODES,
+ * then all holes in the requested range will be accounted for
+ */
+unsigned long __init __absent_pages_in_range(int nid,
+ unsigned long range_start_pfn,
+ unsigned long range_end_pfn)
+{
+ int i = 0;
+ unsigned long prev_end_pfn = 0, hole_pages = 0;
+ unsigned long start_pfn;
+
+ /* Find the end_pfn of the first active range of pfns in the node */
+ i = first_active_region_index_in_nid(nid);
+ if (i == -1)
+ return 0;
+
+ /* Account for ranges before physical memory on this node */
+ if (early_node_map[i].start_pfn > range_start_pfn)
+ hole_pages = early_node_map[i].start_pfn - range_start_pfn;
+
+ prev_end_pfn = early_node_map[i].start_pfn;
+
+ /* Find all holes for the zone within the node */
+ for (; i != -1; i = next_active_region_index_in_nid(i, nid)) {
+
+ /* No need to continue if prev_end_pfn is outside the zone */
+ if (prev_end_pfn >= range_end_pfn)
+ break;
+
+ /* Make sure the end of the zone is not within the hole */
+ start_pfn = min(early_node_map[i].start_pfn, range_end_pfn);
+ prev_end_pfn = max(prev_end_pfn, range_start_pfn);
+
+ /* Update the hole size cound and move on */
+ if (start_pfn > range_start_pfn) {
+ BUG_ON(prev_end_pfn > start_pfn);
+ hole_pages += start_pfn - prev_end_pfn;
+ }
+ prev_end_pfn = early_node_map[i].end_pfn;
+ }
+
+ /* Account for ranges past physical memory on this node */
+ if (range_end_pfn > prev_end_pfn)
+ hole_pages = range_end_pfn -
+ max(range_start_pfn, prev_end_pfn);
+
+ return hole_pages;
+}
+
+/**
+ * absent_pages_in_range - Return number of page frames in holes within a range
+ * @start_pfn: The start PFN to start searching for holes
+ * @end_pfn: The end PFN to stop searching for holes
+ *
+ * It returns the number of pages frames in memory holes within a range
+ */
+unsigned long __init absent_pages_in_range(unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ return __absent_pages_in_range(MAX_NUMNODES, start_pfn, end_pfn);
+}
+
+/* Return the number of page frames in holes in a zone on a node */
+unsigned long __init zone_absent_pages_in_node(int nid,
+ unsigned long zone_type,
+ unsigned long *ignored)
+{
+ unsigned long node_start_pfn, node_end_pfn;
+ unsigned long zone_start_pfn, zone_end_pfn;
+
+ get_pfn_range_for_nid(nid, &node_start_pfn, &node_end_pfn);
+ zone_start_pfn = max(arch_zone_lowest_possible_pfn[zone_type],
+ node_start_pfn);
+ zone_end_pfn = min(arch_zone_highest_possible_pfn[zone_type],
+ node_end_pfn);
+
+ return __absent_pages_in_range(nid, zone_start_pfn, zone_end_pfn);
+}
+
+/* Return the zone index a PFN is in */
+int memmap_zone_idx(struct page *lmem_map)
+{
+ int i;
+ unsigned long phys_addr = virt_to_phys(lmem_map);
+ unsigned long pfn = phys_addr >> PAGE_SHIFT;
+
+ for (i = 0; i < MAX_NR_ZONES; i++)
+ if (pfn < arch_zone_highest_possible_pfn[i])
+ break;
+
+ return i;
+}
+#else
+static inline unsigned long zone_spanned_pages_in_node(int nid,
+ unsigned long zone_type,
+ unsigned long *zones_size)
+{
+ return zones_size[zone_type];
+}
+
+static inline unsigned long zone_absent_pages_in_node(int nid,
+ unsigned long zone_type,
+ unsigned long *zholes_size)
+{
+ if (!zholes_size)
+ return 0;
+
+ return zholes_size[zone_type];
+}
+
+static inline int memmap_zone_idx(struct page *lmem_map)
+{
+ return MAX_NR_ZONES;
+}
+#endif
+
+static void __init calculate_node_totalpages(struct pglist_data *pgdat,
+ unsigned long *zones_size, unsigned long *zholes_size)
+{
+ unsigned long realtotalpages, totalpages = 0;
+ enum zone_type i;
+
+ for (i = 0; i < MAX_NR_ZONES; i++)
+ totalpages += zone_spanned_pages_in_node(pgdat->node_id, i,
+ zones_size);
+ pgdat->node_spanned_pages = totalpages;
+
+ realtotalpages = totalpages;
+ for (i = 0; i < MAX_NR_ZONES; i++)
+ realtotalpages -=
+ zone_absent_pages_in_node(pgdat->node_id, i,
+ zholes_size);
+ pgdat->node_present_pages = realtotalpages;
+ printk(KERN_DEBUG "On node %d totalpages: %lu\n", pgdat->node_id,
+ realtotalpages);
+}
+
/*
* Set up the zone data structures:
* - mark all pages reserved
@@ -1998,11 +2372,34 @@
for (j = 0; j < MAX_NR_ZONES; j++) {
struct zone *zone = pgdat->node_zones + j;
- unsigned long size, realsize;
+ unsigned long size, realsize, memmap_pages;
- realsize = size = zones_size[j];
- if (zholes_size)
- realsize -= zholes_size[j];
+ size = zone_spanned_pages_in_node(nid, j, zones_size);
+ realsize = size - zone_absent_pages_in_node(nid, j,
+ zholes_size);
+
+ /*
+ * Adjust realsize so that it accounts for how much memory
+ * is used by this zone for memmap. This affects the watermark
+ * and per-cpu initialisations
+ */
+ memmap_pages = (size * sizeof(struct page)) >> PAGE_SHIFT;
+ if (realsize >= memmap_pages) {
+ realsize -= memmap_pages;
+ printk(KERN_DEBUG
+ " %s zone: %lu pages used for memmap\n",
+ zone_names[j], memmap_pages);
+ } else
+ printk(KERN_WARNING
+ " %s zone: %lu pages exceeds realsize %lu\n",
+ zone_names[j], memmap_pages, realsize);
+
+ /* Account for reserved DMA pages */
+ if (j == ZONE_DMA && realsize > dma_reserve) {
+ realsize -= dma_reserve;
+ printk(KERN_DEBUG " DMA zone: %lu pages reserved\n",
+ dma_reserve);
+ }
if (!is_highmem_idx(j))
nr_kernel_pages += realsize;
@@ -2011,6 +2408,7 @@
zone->spanned_pages = size;
zone->present_pages = realsize;
#ifdef CONFIG_NUMA
+ zone->node = nid;
zone->min_unmapped_pages = (realsize*sysctl_min_unmapped_ratio)
/ 100;
zone->min_slab_pages = (realsize * sysctl_min_slab_ratio) / 100;
@@ -2073,8 +2471,13 @@
/*
* With no DISCONTIG, the global mem_map is just set as node 0's
*/
- if (pgdat == NODE_DATA(0))
+ if (pgdat == NODE_DATA(0)) {
mem_map = NODE_DATA(0)->node_mem_map;
+#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
+ if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
+ mem_map -= pgdat->node_start_pfn;
+#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+ }
#endif
#endif /* CONFIG_FLAT_NODE_MEM_MAP */
}
@@ -2085,13 +2488,255 @@
{
pgdat->node_id = nid;
pgdat->node_start_pfn = node_start_pfn;
- calculate_zone_totalpages(pgdat, zones_size, zholes_size);
+ calculate_node_totalpages(pgdat, zones_size, zholes_size);
alloc_node_mem_map(pgdat);
free_area_init_core(pgdat, zones_size, zholes_size);
}
+#ifdef CONFIG_ARCH_POPULATES_NODE_MAP
+/**
+ * add_active_range - Register a range of PFNs backed by physical memory
+ * @nid: The node ID the range resides on
+ * @start_pfn: The start PFN of the available physical memory
+ * @end_pfn: The end PFN of the available physical memory
+ *
+ * These ranges are stored in an early_node_map[] and later used by
+ * free_area_init_nodes() to calculate zone sizes and holes. If the
+ * range spans a memory hole, it is up to the architecture to ensure
+ * the memory is not freed by the bootmem allocator. If possible
+ * the range being registered will be merged with existing ranges.
+ */
+void __init add_active_range(unsigned int nid, unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ int i;
+
+ printk(KERN_DEBUG "Entering add_active_range(%d, %lu, %lu) "
+ "%d entries of %d used\n",
+ nid, start_pfn, end_pfn,
+ nr_nodemap_entries, MAX_ACTIVE_REGIONS);
+
+ /* Merge with existing active regions if possible */
+ for (i = 0; i < nr_nodemap_entries; i++) {
+ if (early_node_map[i].nid != nid)
+ continue;
+
+ /* Skip if an existing region covers this new one */
+ if (start_pfn >= early_node_map[i].start_pfn &&
+ end_pfn <= early_node_map[i].end_pfn)
+ return;
+
+ /* Merge forward if suitable */
+ if (start_pfn <= early_node_map[i].end_pfn &&
+ end_pfn > early_node_map[i].end_pfn) {
+ early_node_map[i].end_pfn = end_pfn;
+ return;
+ }
+
+ /* Merge backward if suitable */
+ if (start_pfn < early_node_map[i].end_pfn &&
+ end_pfn >= early_node_map[i].start_pfn) {
+ early_node_map[i].start_pfn = start_pfn;
+ return;
+ }
+ }
+
+ /* Check that early_node_map is large enough */
+ if (i >= MAX_ACTIVE_REGIONS) {
+ printk(KERN_CRIT "More than %d memory regions, truncating\n",
+ MAX_ACTIVE_REGIONS);
+ return;
+ }
+
+ early_node_map[i].nid = nid;
+ early_node_map[i].start_pfn = start_pfn;
+ early_node_map[i].end_pfn = end_pfn;
+ nr_nodemap_entries = i + 1;
+}
+
+/**
+ * shrink_active_range - Shrink an existing registered range of PFNs
+ * @nid: The node id the range is on that should be shrunk
+ * @old_end_pfn: The old end PFN of the range
+ * @new_end_pfn: The new PFN of the range
+ *
+ * i386 with NUMA use alloc_remap() to store a node_mem_map on a local node.
+ * The map is kept at the end physical page range that has already been
+ * registered with add_active_range(). This function allows an arch to shrink
+ * an existing registered range.
+ */
+void __init shrink_active_range(unsigned int nid, unsigned long old_end_pfn,
+ unsigned long new_end_pfn)
+{
+ int i;
+
+ /* Find the old active region end and shrink */
+ for_each_active_range_index_in_nid(i, nid)
+ if (early_node_map[i].end_pfn == old_end_pfn) {
+ early_node_map[i].end_pfn = new_end_pfn;
+ break;
+ }
+}
+
+/**
+ * remove_all_active_ranges - Remove all currently registered regions
+ * During discovery, it may be found that a table like SRAT is invalid
+ * and an alternative discovery method must be used. This function removes
+ * all currently registered regions.
+ */
+void __init remove_all_active_ranges()
+{
+ memset(early_node_map, 0, sizeof(early_node_map));
+ nr_nodemap_entries = 0;
+#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
+ memset(node_boundary_start_pfn, 0, sizeof(node_boundary_start_pfn));
+ memset(node_boundary_end_pfn, 0, sizeof(node_boundary_end_pfn));
+#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
+}
+
+/* Compare two active node_active_regions */
+static int __init cmp_node_active_region(const void *a, const void *b)
+{
+ struct node_active_region *arange = (struct node_active_region *)a;
+ struct node_active_region *brange = (struct node_active_region *)b;
+
+ /* Done this way to avoid overflows */
+ if (arange->start_pfn > brange->start_pfn)
+ return 1;
+ if (arange->start_pfn < brange->start_pfn)
+ return -1;
+
+ return 0;
+}
+
+/* sort the node_map by start_pfn */
+static void __init sort_node_map(void)
+{
+ sort(early_node_map, (size_t)nr_nodemap_entries,
+ sizeof(struct node_active_region),
+ cmp_node_active_region, NULL);
+}
+
+/* Find the lowest pfn for a node. This depends on a sorted early_node_map */
+unsigned long __init find_min_pfn_for_node(unsigned long nid)
+{
+ int i;
+
+ /* Assuming a sorted map, the first range found has the starting pfn */
+ for_each_active_range_index_in_nid(i, nid)
+ return early_node_map[i].start_pfn;
+
+ printk(KERN_WARNING "Could not find start_pfn for node %lu\n", nid);
+ return 0;
+}
+
+/**
+ * find_min_pfn_with_active_regions - Find the minimum PFN registered
+ *
+ * It returns the minimum PFN based on information provided via
+ * add_active_range()
+ */
+unsigned long __init find_min_pfn_with_active_regions(void)
+{
+ return find_min_pfn_for_node(MAX_NUMNODES);
+}
+
+/**
+ * find_max_pfn_with_active_regions - Find the maximum PFN registered
+ *
+ * It returns the maximum PFN based on information provided via
+ * add_active_range()
+ */
+unsigned long __init find_max_pfn_with_active_regions(void)
+{
+ int i;
+ unsigned long max_pfn = 0;
+
+ for (i = 0; i < nr_nodemap_entries; i++)
+ max_pfn = max(max_pfn, early_node_map[i].end_pfn);
+
+ return max_pfn;
+}
+
+/**
+ * free_area_init_nodes - Initialise all pg_data_t and zone data
+ * @arch_max_dma_pfn: The maximum PFN usable for ZONE_DMA
+ * @arch_max_dma32_pfn: The maximum PFN usable for ZONE_DMA32
+ * @arch_max_low_pfn: The maximum PFN usable for ZONE_NORMAL
+ * @arch_max_high_pfn: The maximum PFN usable for ZONE_HIGHMEM
+ *
+ * This will call free_area_init_node() for each active node in the system.
+ * Using the page ranges provided by add_active_range(), the size of each
+ * zone in each node and their holes is calculated. If the maximum PFN
+ * between two adjacent zones match, it is assumed that the zone is empty.
+ * For example, if arch_max_dma_pfn == arch_max_dma32_pfn, it is assumed
+ * that arch_max_dma32_pfn has no pages. It is also assumed that a zone
+ * starts where the previous one ended. For example, ZONE_DMA32 starts
+ * at arch_max_dma_pfn.
+ */
+void __init free_area_init_nodes(unsigned long *max_zone_pfn)
+{
+ unsigned long nid;
+ enum zone_type i;
+
+ /* Record where the zone boundaries are */
+ memset(arch_zone_lowest_possible_pfn, 0,
+ sizeof(arch_zone_lowest_possible_pfn));
+ memset(arch_zone_highest_possible_pfn, 0,
+ sizeof(arch_zone_highest_possible_pfn));
+ arch_zone_lowest_possible_pfn[0] = find_min_pfn_with_active_regions();
+ arch_zone_highest_possible_pfn[0] = max_zone_pfn[0];
+ for (i = 1; i < MAX_NR_ZONES; i++) {
+ arch_zone_lowest_possible_pfn[i] =
+ arch_zone_highest_possible_pfn[i-1];
+ arch_zone_highest_possible_pfn[i] =
+ max(max_zone_pfn[i], arch_zone_lowest_possible_pfn[i]);
+ }
+
+ /* Regions in the early_node_map can be in any order */
+ sort_node_map();
+
+ /* Print out the zone ranges */
+ printk("Zone PFN ranges:\n");
+ for (i = 0; i < MAX_NR_ZONES; i++)
+ printk(" %-8s %8lu -> %8lu\n",
+ zone_names[i],
+ arch_zone_lowest_possible_pfn[i],
+ arch_zone_highest_possible_pfn[i]);
+
+ /* Print out the early_node_map[] */
+ printk("early_node_map[%d] active PFN ranges\n", nr_nodemap_entries);
+ for (i = 0; i < nr_nodemap_entries; i++)
+ printk(" %3d: %8lu -> %8lu\n", early_node_map[i].nid,
+ early_node_map[i].start_pfn,
+ early_node_map[i].end_pfn);
+
+ /* Initialise every node */
+ for_each_online_node(nid) {
+ pg_data_t *pgdat = NODE_DATA(nid);
+ free_area_init_node(nid, pgdat, NULL,
+ find_min_pfn_for_node(nid), NULL);
+ }
+}
+#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+
+/**
+ * set_dma_reserve - Account the specified number of pages reserved in ZONE_DMA
+ * @new_dma_reserve - The number of pages to mark reserved
+ *
+ * The per-cpu batchsize and zone watermarks are determined by present_pages.
+ * In the DMA zone, a significant percentage may be consumed by kernel image
+ * and other unfreeable allocations which can skew the watermarks badly. This
+ * function may optionally be used to account for unfreeable pages in
+ * ZONE_DMA. The effect will be lower watermarks and smaller per-cpu batchsize
+ */
+void __init set_dma_reserve(unsigned long new_dma_reserve)
+{
+ dma_reserve = new_dma_reserve;
+}
+
#ifndef CONFIG_NEED_MULTIPLE_NODES
static bootmem_data_t contig_bootmem_data;
struct pglist_data contig_page_data = { .bdata = &contig_bootmem_data };
diff --git a/mm/shmem.c b/mm/shmem.c
index 8631be4..eda907c 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1351,7 +1351,6 @@
inode->i_mode = mode;
inode->i_uid = current->fsuid;
inode->i_gid = current->fsgid;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_mapping->a_ops = &shmem_aops;
inode->i_mapping->backing_dev_info = &shmem_backing_dev_info;
@@ -2157,8 +2156,7 @@
static void destroy_inodecache(void)
{
- if (kmem_cache_destroy(shmem_inode_cachep))
- printk(KERN_INFO "shmem_inode_cache: not all structures were freed\n");
+ kmem_cache_destroy(shmem_inode_cachep);
}
static const struct address_space_operations shmem_aops = {
diff --git a/mm/slab.c b/mm/slab.c
index 7a48eb1..792bfe3 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -972,7 +972,39 @@
return nr;
}
-#ifdef CONFIG_NUMA
+#ifndef CONFIG_NUMA
+
+#define drain_alien_cache(cachep, alien) do { } while (0)
+#define reap_alien(cachep, l3) do { } while (0)
+
+static inline struct array_cache **alloc_alien_cache(int node, int limit)
+{
+ return (struct array_cache **)BAD_ALIEN_MAGIC;
+}
+
+static inline void free_alien_cache(struct array_cache **ac_ptr)
+{
+}
+
+static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
+{
+ return 0;
+}
+
+static inline void *alternate_node_alloc(struct kmem_cache *cachep,
+ gfp_t flags)
+{
+ return NULL;
+}
+
+static inline void *__cache_alloc_node(struct kmem_cache *cachep,
+ gfp_t flags, int nodeid)
+{
+ return NULL;
+}
+
+#else /* CONFIG_NUMA */
+
static void *__cache_alloc_node(struct kmem_cache *, gfp_t, int);
static void *alternate_node_alloc(struct kmem_cache *, gfp_t);
@@ -1101,26 +1133,6 @@
}
return 1;
}
-
-#else
-
-#define drain_alien_cache(cachep, alien) do { } while (0)
-#define reap_alien(cachep, l3) do { } while (0)
-
-static inline struct array_cache **alloc_alien_cache(int node, int limit)
-{
- return (struct array_cache **)BAD_ALIEN_MAGIC;
-}
-
-static inline void free_alien_cache(struct array_cache **ac_ptr)
-{
-}
-
-static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
-{
- return 0;
-}
-
#endif
static int __cpuinit cpuup_callback(struct notifier_block *nfb,
@@ -1564,7 +1576,13 @@
*/
flags |= __GFP_COMP;
#endif
- flags |= cachep->gfpflags;
+
+ /*
+ * Under NUMA we want memory on the indicated node. We will handle
+ * the needed fallback ourselves since we want to serve from our
+ * per node object lists first for other nodes.
+ */
+ flags |= cachep->gfpflags | GFP_THISNODE;
page = alloc_pages_node(nodeid, flags, cachep->gfporder);
if (!page)
@@ -2442,7 +2460,6 @@
* @cachep: the cache to destroy
*
* Remove a struct kmem_cache object from the slab cache.
- * Returns 0 on success.
*
* It is expected this function will be called by a module when it is
* unloaded. This will remove the cache completely, and avoid a duplicate
@@ -2454,7 +2471,7 @@
* The caller must guarantee that noone will allocate memory from the cache
* during the kmem_cache_destroy().
*/
-int kmem_cache_destroy(struct kmem_cache *cachep)
+void kmem_cache_destroy(struct kmem_cache *cachep)
{
BUG_ON(!cachep || in_interrupt());
@@ -2475,7 +2492,7 @@
list_add(&cachep->next, &cache_chain);
mutex_unlock(&cache_chain_mutex);
unlock_cpu_hotplug();
- return 1;
+ return;
}
if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU))
@@ -2483,7 +2500,6 @@
__kmem_cache_destroy(cachep);
unlock_cpu_hotplug();
- return 0;
}
EXPORT_SYMBOL(kmem_cache_destroy);
@@ -3030,14 +3046,6 @@
void *objp;
struct array_cache *ac;
-#ifdef CONFIG_NUMA
- if (unlikely(current->flags & (PF_SPREAD_SLAB | PF_MEMPOLICY))) {
- objp = alternate_node_alloc(cachep, flags);
- if (objp != NULL)
- return objp;
- }
-#endif
-
check_irq_off();
ac = cpu_cache_get(cachep);
if (likely(ac->avail)) {
@@ -3055,12 +3063,24 @@
gfp_t flags, void *caller)
{
unsigned long save_flags;
- void *objp;
+ void *objp = NULL;
cache_alloc_debugcheck_before(cachep, flags);
local_irq_save(save_flags);
- objp = ____cache_alloc(cachep, flags);
+
+ if (unlikely(NUMA_BUILD &&
+ current->flags & (PF_SPREAD_SLAB | PF_MEMPOLICY)))
+ objp = alternate_node_alloc(cachep, flags);
+
+ if (!objp)
+ objp = ____cache_alloc(cachep, flags);
+ /*
+ * We may just have run out of memory on the local node.
+ * __cache_alloc_node() knows how to locate memory on other nodes
+ */
+ if (NUMA_BUILD && !objp)
+ objp = __cache_alloc_node(cachep, flags, numa_node_id());
local_irq_restore(save_flags);
objp = cache_alloc_debugcheck_after(cachep, flags, objp,
caller);
@@ -3079,7 +3099,7 @@
{
int nid_alloc, nid_here;
- if (in_interrupt())
+ if (in_interrupt() || (flags & __GFP_THISNODE))
return NULL;
nid_alloc = nid_here = numa_node_id();
if (cpuset_do_slab_mem_spread() && (cachep->flags & SLAB_MEM_SPREAD))
@@ -3092,6 +3112,28 @@
}
/*
+ * Fallback function if there was no memory available and no objects on a
+ * certain node and we are allowed to fall back. We mimick the behavior of
+ * the page allocator. We fall back according to a zonelist determined by
+ * the policy layer while obeying cpuset constraints.
+ */
+void *fallback_alloc(struct kmem_cache *cache, gfp_t flags)
+{
+ struct zonelist *zonelist = &NODE_DATA(slab_node(current->mempolicy))
+ ->node_zonelists[gfp_zone(flags)];
+ struct zone **z;
+ void *obj = NULL;
+
+ for (z = zonelist->zones; *z && !obj; z++)
+ if (zone_idx(*z) <= ZONE_NORMAL &&
+ cpuset_zone_allowed(*z, flags))
+ obj = __cache_alloc_node(cache,
+ flags | __GFP_THISNODE,
+ zone_to_nid(*z));
+ return obj;
+}
+
+/*
* A interface to enable slab creation on nodeid
*/
static void *__cache_alloc_node(struct kmem_cache *cachep, gfp_t flags,
@@ -3144,11 +3186,15 @@
must_grow:
spin_unlock(&l3->list_lock);
x = cache_grow(cachep, flags, nodeid);
+ if (x)
+ goto retry;
- if (!x)
- return NULL;
+ if (!(flags & __GFP_THISNODE))
+ /* Unable to grow the cache. Fall back to other nodes. */
+ return fallback_alloc(cachep, flags);
- goto retry;
+ return NULL;
+
done:
return obj;
}
diff --git a/mm/slob.c b/mm/slob.c
index 2018862..5423941 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -270,10 +270,9 @@
}
EXPORT_SYMBOL(kmem_cache_create);
-int kmem_cache_destroy(struct kmem_cache *c)
+void kmem_cache_destroy(struct kmem_cache *c)
{
slob_free(c, sizeof(struct kmem_cache));
- return 0;
}
EXPORT_SYMBOL(kmem_cache_destroy);
diff --git a/mm/truncate.c b/mm/truncate.c
index c6ab55e..a654928 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/swap.h>
#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
@@ -52,36 +53,26 @@
/*
* This is for invalidate_inode_pages(). That function can be called at
* any time, and is not supposed to throw away dirty pages. But pages can
- * be marked dirty at any time too. So we re-check the dirtiness inside
- * ->tree_lock. That provides exclusion against the __set_page_dirty
- * functions.
+ * be marked dirty at any time too, so use remove_mapping which safely
+ * discards clean, unused pages.
*
* Returns non-zero if the page was successfully invalidated.
*/
static int
invalidate_complete_page(struct address_space *mapping, struct page *page)
{
+ int ret;
+
if (page->mapping != mapping)
return 0;
if (PagePrivate(page) && !try_to_release_page(page, 0))
return 0;
- write_lock_irq(&mapping->tree_lock);
- if (PageDirty(page))
- goto failed;
- if (page_count(page) != 2) /* caller's ref + pagecache ref */
- goto failed;
-
- BUG_ON(PagePrivate(page));
- __remove_from_page_cache(page);
- write_unlock_irq(&mapping->tree_lock);
+ ret = remove_mapping(mapping, page);
ClearPageUptodate(page);
- page_cache_release(page); /* pagecache ref */
- return 1;
-failed:
- write_unlock_irq(&mapping->tree_lock);
- return 0;
+
+ return ret;
}
/**
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 9aad8b0..1ac191c 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -241,7 +241,6 @@
/**
* get_vm_area - reserve a contingous kernel virtual area
- *
* @size: size of the area
* @flags: %VM_IOREMAP for I/O mappings or VM_ALLOC
*
@@ -273,7 +272,7 @@
}
/* Caller must hold vmlist_lock */
-struct vm_struct *__remove_vm_area(void *addr)
+static struct vm_struct *__remove_vm_area(void *addr)
{
struct vm_struct **p, *tmp;
@@ -296,7 +295,6 @@
/**
* remove_vm_area - find and remove a contingous kernel virtual area
- *
* @addr: base address
*
* Search for the kernel VM area starting at @addr, and remove it.
@@ -355,7 +353,6 @@
/**
* vfree - release memory allocated by vmalloc()
- *
* @addr: memory base address
*
* Free the virtually contiguous memory area starting at @addr, as
@@ -373,7 +370,6 @@
/**
* vunmap - release virtual mapping obtained by vmap()
- *
* @addr: memory base address
*
* Free the virtually contiguous memory area starting at @addr,
@@ -390,7 +386,6 @@
/**
* vmap - map an array of pages into virtually contiguous space
- *
* @pages: array of page pointers
* @count: number of pages to map
* @flags: vm_area->flags
@@ -471,7 +466,6 @@
/**
* __vmalloc_node - allocate virtually contiguous memory
- *
* @size: allocation size
* @gfp_mask: flags for the page level allocator
* @prot: protection mask for the allocated pages
@@ -505,9 +499,7 @@
/**
* vmalloc - allocate virtually contiguous memory
- *
* @size: allocation size
- *
* Allocate enough pages to cover @size from the page level
* allocator and map them into contiguous kernel virtual space.
*
@@ -521,11 +513,11 @@
EXPORT_SYMBOL(vmalloc);
/**
- * vmalloc_user - allocate virtually contiguous memory which has
- * been zeroed so it can be mapped to userspace without
- * leaking data.
+ * vmalloc_user - allocate zeroed virtually contiguous memory for userspace
+ * @size: allocation size
*
- * @size: allocation size
+ * The resulting memory area is zeroed so it can be mapped to userspace
+ * without leaking data.
*/
void *vmalloc_user(unsigned long size)
{
@@ -544,7 +536,6 @@
/**
* vmalloc_node - allocate memory on a specific node
- *
* @size: allocation size
* @node: numa node
*
@@ -566,7 +557,6 @@
/**
* vmalloc_exec - allocate virtually contiguous, executable memory
- *
* @size: allocation size
*
* Kernel-internal function to allocate enough pages to cover @size
@@ -584,7 +574,6 @@
/**
* vmalloc_32 - allocate virtually contiguous memory (32bit addressable)
- *
* @size: allocation size
*
* Allocate enough 32bit PA addressable pages to cover @size from the
@@ -597,11 +586,11 @@
EXPORT_SYMBOL(vmalloc_32);
/**
- * vmalloc_32_user - allocate virtually contiguous memory (32bit
- * addressable) which is zeroed so it can be
- * mapped to userspace without leaking data.
- *
+ * vmalloc_32_user - allocate zeroed virtually contiguous 32bit memory
* @size: allocation size
+ *
+ * The resulting memory area is 32bit addressable and zeroed so it can be
+ * mapped to userspace without leaking data.
*/
void *vmalloc_32_user(unsigned long size)
{
@@ -695,7 +684,6 @@
/**
* remap_vmalloc_range - map vmalloc pages to userspace
- *
* @vma: vma to cover (map full range of vma)
* @addr: vmalloc memory
* @pgoff: number of pages into addr before first page to map
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 87779dd..eca7031 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -19,6 +19,7 @@
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/highmem.h>
+#include <linux/vmstat.h>
#include <linux/file.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
@@ -370,7 +371,7 @@
/* synchronous write or broken a_ops? */
ClearPageReclaim(page);
}
-
+ inc_zone_page_state(page, NR_VMSCAN_WRITE);
return PAGE_SUCCESS;
}
@@ -383,11 +384,30 @@
BUG_ON(mapping != page_mapping(page));
write_lock_irq(&mapping->tree_lock);
-
/*
- * The non-racy check for busy page. It is critical to check
- * PageDirty _after_ making sure that the page is freeable and
- * not in use by anybody. (pagecache + us == 2)
+ * The non racy check for a busy page.
+ *
+ * Must be careful with the order of the tests. When someone has
+ * a ref to the page, it may be possible that they dirty it then
+ * drop the reference. So if PageDirty is tested before page_count
+ * here, then the following race may occur:
+ *
+ * get_user_pages(&page);
+ * [user mapping goes away]
+ * write_to(page);
+ * !PageDirty(page) [good]
+ * SetPageDirty(page);
+ * put_page(page);
+ * !page_count(page) [good, discard it]
+ *
+ * [oops, our write_to data is lost]
+ *
+ * Reversing the order of the tests ensures such a situation cannot
+ * escape unnoticed. The smp_rmb is needed to ensure the page->flags
+ * load is not satisfied before that of page->_count.
+ *
+ * Note that if SetPageDirty is always performed via set_page_dirty,
+ * and thus under tree_lock, then this ordering is not required.
*/
if (unlikely(page_count(page) != 2))
goto cannot_free;
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 490d8c1..a2b6a9f 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -371,7 +371,7 @@
__inc_zone_state(z, NUMA_MISS);
__inc_zone_state(zonelist->zones[0], NUMA_FOREIGN);
}
- if (z->zone_pgdat == NODE_DATA(numa_node_id()))
+ if (z->node == numa_node_id())
__inc_zone_state(z, NUMA_LOCAL);
else
__inc_zone_state(z, NUMA_OTHER);
@@ -465,6 +465,7 @@
"nr_writeback",
"nr_unstable",
"nr_bounce",
+ "nr_vmscan_write",
#ifdef CONFIG_NUMA
"numa_hit",
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index dfa504f..700c6e0 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -488,7 +488,6 @@
return NULL;
inode->i_mode = mode;
inode->i_uid = inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
switch(mode & S_IFMT) {
@@ -858,7 +857,6 @@
void unregister_rpc_pipefs(void)
{
- if (kmem_cache_destroy(rpc_inode_cachep))
- printk(KERN_WARNING "RPC: unable to free inode cache\n");
+ kmem_cache_destroy(rpc_inode_cachep);
unregister_filesystem(&rpc_pipe_fs_type);
}
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 6390461..a1ab4ee 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -1059,10 +1059,10 @@
mempool_destroy(rpc_buffer_mempool);
if (rpc_task_mempool)
mempool_destroy(rpc_task_mempool);
- if (rpc_task_slabp && kmem_cache_destroy(rpc_task_slabp))
- printk(KERN_INFO "rpc_task: not all structures were freed\n");
- if (rpc_buffer_slabp && kmem_cache_destroy(rpc_buffer_slabp))
- printk(KERN_INFO "rpc_buffers: not all structures were freed\n");
+ if (rpc_task_slabp)
+ kmem_cache_destroy(rpc_task_slabp);
+ if (rpc_buffer_slabp)
+ kmem_cache_destroy(rpc_buffer_slabp);
}
int
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 3d52389..4f5ff19 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -63,6 +63,13 @@
-xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
else echo "$(2)"; fi ;)
+# as-instr
+# Usage: cflags-y += $(call as-instr, instr, option1, option2)
+
+as-instr = $(shell if echo -e "$(1)" | $(AS) >/dev/null 2>&1 -W -Z -o astest$$$$.out ; \
+ then echo "$(2)"; else echo "$(3)"; fi; \
+ rm -f astest$$$$.out)
+
# cc-option
# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
diff --git a/scripts/gcc-x86_64-has-stack-protector.sh b/scripts/gcc-x86_64-has-stack-protector.sh
new file mode 100644
index 0000000..325c0a1
--- /dev/null
+++ b/scripts/gcc-x86_64-has-stack-protector.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+echo "int foo(void) { char X[200]; return 3; }" | $1 -S -xc -c -O0 -mcmodel=kernel -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
+if [ "$?" -eq "0" ] ; then
+ echo $2
+fi
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index de76da8..f61c9cc 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -444,6 +444,14 @@
return 1;
}
+static int do_eisa_entry(const char *filename, struct eisa_device_id *eisa,
+ char *alias)
+{
+ if (eisa->sig[0])
+ sprintf(alias, EISA_DEVICE_MODALIAS_FMT "*", eisa->sig);
+ return 1;
+}
+
/* Ignore any prefix, eg. v850 prepends _ */
static inline int sym_is(const char *symbol, const char *name)
{
@@ -547,6 +555,10 @@
do_table(symval, sym->st_size,
sizeof(struct input_device_id), "input",
do_input_entry, mod);
+ else if (sym_is(symname, "__mod_eisa_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct eisa_device_id), "eisa",
+ do_eisa_entry, mod);
}
/* Now add out buffered information to the generated C source */
diff --git a/security/inode.c b/security/inode.c
index 47eb634..49ee515 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -44,8 +44,8 @@
static int default_open(struct inode *inode, struct file *file)
{
- if (inode->u.generic_ip)
- file->private_data = inode->u.generic_ip;
+ if (inode->i_private)
+ file->private_data = inode->i_private;
return 0;
}
@@ -64,7 +64,6 @@
inode->i_mode = mode;
inode->i_uid = 0;
inode->i_gid = 0;
- inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
switch (mode & S_IFMT) {
@@ -194,7 +193,7 @@
* directory dentry if set. If this paramater is NULL, then the
* file will be created in the root of the securityfs filesystem.
* @data: a pointer to something that the caller will want to get to later
- * on. The inode.u.generic_ip pointer will point to this value on
+ * on. The inode.i_private pointer will point to this value on
* the open() call.
* @fops: a pointer to a struct file_operations that should be used for
* this file.
@@ -240,7 +239,7 @@
if (fops)
dentry->d_inode->i_fop = fops;
if (data)
- dentry->d_inode->u.generic_ip = data;
+ dentry->d_inode->i_private = data;
}
exit:
return dentry;
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 00534c3..bab7b38 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -771,7 +771,6 @@
if (ret) {
ret->i_mode = mode;
ret->i_uid = ret->i_gid = 0;
- ret->i_blksize = PAGE_CACHE_SIZE;
ret->i_blocks = 0;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
}
diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c
index 7b168d8..83ff8a7 100644
--- a/sound/oss/sh_dac_audio.c
+++ b/sound/oss/sh_dac_audio.c
@@ -1,3 +1,14 @@
+/*
+ * sound/oss/sh_dac_audio.c
+ *
+ * SH DAC based sound :(
+ *
+ * Copyright (C) 2004,2005 Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
@@ -6,18 +17,17 @@
#include <linux/fs.h>
#include <linux/sound.h>
#include <linux/soundcard.h>
+#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/delay.h>
-#include <linux/interrupt.h>
-
+#include <asm/clock.h>
#include <asm/cpu/dac.h>
-
-#ifdef MACH_HP600
+#include <asm/cpu/timer.h>
+#include <asm/machvec.h>
#include <asm/hp6xx/hp6xx.h>
-#include <asm/hd64461/hd64461.h>
-#endif
+#include <asm/hd64461.h>
#define MODNAME "sh_dac_audio"
@@ -26,11 +36,6 @@
#define TMU1_TCR_INIT 0x0020 /* Clock/4, rising edge; interrupt on */
#define TMU1_TSTR_INIT 0x02 /* Bit to turn on TMU1 */
-#define TMU_TSTR 0xfffffe92
-#define TMU1_TCOR 0xfffffea0
-#define TMU1_TCNT 0xfffffea4
-#define TMU1_TCR 0xfffffea8
-
#define BUFFER_SIZE 48000
static int rate;
@@ -71,34 +76,37 @@
static void dac_audio_start(void)
{
-#ifdef MACH_HP600
- u16 v;
- v = inw(HD64461_GPADR);
- v &= ~HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-#endif
+ if (mach_is_hp6xx()) {
+ u16 v = inw(HD64461_GPADR);
+ v &= ~HD64461_GPADR_SPEAKER;
+ outw(v, HD64461_GPADR);
+ }
+
sh_dac_enable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
ctrl_outw(TMU1_TCR_INIT, TMU1_TCR);
}
static void dac_audio_stop(void)
{
-#ifdef MACH_HP600
- u16 v;
-#endif
dac_audio_stop_timer();
-#ifdef MACH_HP600
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
-#endif
+
+ if (mach_is_hp6xx()) {
+ u16 v = inw(HD64461_GPADR);
+ v |= HD64461_GPADR_SPEAKER;
+ outw(v, HD64461_GPADR);
+ }
+
+ sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
sh_dac_disable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
}
static void dac_audio_set_rate(void)
{
unsigned long interval;
+ struct clk *clk;
- interval = (current_cpu_data.module_clock / 4) / rate;
+ clk = clk_get("module_clk");
+ interval = (clk_get_rate(clk) / 4) / rate;
+ clk_put(clk);
ctrl_outl(interval, TMU1_TCOR);
ctrl_outl(interval, TMU1_TCNT);
}
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 5105b6b..abe29da 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -181,9 +181,9 @@
case -ENODEV:
return -ENODEV;
/* errors that might occur during unplugging */
- case -EPROTO: /* EHCI */
- case -ETIMEDOUT: /* OHCI */
- case -EILSEQ: /* UHCI */
+ case -EPROTO:
+ case -ETIME:
+ case -EILSEQ:
return -EIO;
default:
snd_printk(KERN_ERR "urb status %d\n", status);