diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 5eff8ad..cccda99 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -59,6 +59,20 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_core.
 
+config TWL4030_CORE
+	bool "Texas Instruments TWL4030/TPS659x0 Support"
+	depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
+	help
+	  Say yes here if you have TWL4030 family chip on your board.
+	  This core driver provides register access and IRQ handling
+	  facilities, and registers devices for the various functions
+	  so that function-specific drivers can bind to them.
+
+	  These multi-function chips are found on many OMAP2 and OMAP3
+	  boards, providing power management, RTC, GPIO, keypad, a
+	  high speed USB OTG transceiver, an audio codec (on most
+	  versions) and many other features.
+
 config MFD_TMIO
 	bool
 	default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 759b1fe..68e237b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -17,6 +17,8 @@
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
 
+obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o
+
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
 obj-$(CONFIG_MCP)		+= mcp-core.o
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
new file mode 100644
index 0000000..4af1624
--- /dev/null
+++ b/drivers/mfd/twl4030-core.c
@@ -0,0 +1,1257 @@
+/*
+ * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/kernel_stat.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/random.h>
+#include <linux/kthread.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/twl4030.h>
+
+
+/*
+ * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
+ * Management and System Companion Device" chips originally designed for
+ * use in OMAP2 and OMAP 3 based systems.  Its control interfaces use I2C,
+ * often at around 3 Mbit/sec, including for interrupt handling.
+ *
+ * This driver core provides genirq support for the interrupts emitted,
+ * by the various modules, and exports register access primitives.
+ *
+ * FIXME this driver currently requires use of the first interrupt line
+ * (and associated registers).
+ */
+
+#define DRIVER_NAME			"twl4030"
+
+#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
+	defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
+#define twl_has_bci()		true
+#else
+#define twl_has_bci()		false
+#endif
+
+#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE)
+#define twl_has_keypad()	true
+#else
+#define twl_has_keypad()	false
+#endif
+
+#if defined(CONFIG_GPIO_TWL4030) || defined(CONFIG_GPIO_TWL4030_MODULE)
+#define twl_has_gpio()	true
+#else
+#define twl_has_gpio()	false
+#endif
+
+#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE)
+#define twl_has_madc()	true
+#else
+#define twl_has_madc()	false
+#endif
+
+#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
+#define twl_has_rtc()	true
+#else
+#define twl_has_rtc()	false
+#endif
+
+#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
+#define twl_has_usb()	true
+#else
+#define twl_has_usb()	false
+#endif
+
+static inline void activate_irq(int irq)
+{
+#ifdef CONFIG_ARM
+	/* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
+	 */
+	set_irq_flags(irq, IRQF_VALID);
+#else
+	/* same effect on other architectures */
+	set_irq_noprobe(irq);
+#endif
+}
+
+/* Primary Interrupt Handler on TWL4030 Registers */
+
+/* Register Definitions */
+
+#define REG_PIH_ISR_P1			(0x1)
+#define REG_PIH_ISR_P2			(0x2)
+#define REG_PIH_SIR			(0x3)
+
+/* Triton Core internal information (BEGIN) */
+
+/* Last - for index max*/
+#define TWL4030_MODULE_LAST		TWL4030_MODULE_SECURED_REG
+
+#define TWL4030_NUM_SLAVES		4
+
+
+/* Base Address defns for twl4030_map[] */
+
+/* subchip/slave 0 - USB ID */
+#define TWL4030_BASEADD_USB		0x0000
+
+/* subchip/slave 1 - AUD ID */
+#define TWL4030_BASEADD_AUDIO_VOICE	0x0000
+#define TWL4030_BASEADD_GPIO		0x0098
+#define TWL4030_BASEADD_INTBR		0x0085
+#define TWL4030_BASEADD_PIH		0x0080
+#define TWL4030_BASEADD_TEST		0x004C
+
+/* subchip/slave 2 - AUX ID */
+#define TWL4030_BASEADD_INTERRUPTS	0x00B9
+#define TWL4030_BASEADD_LED		0x00EE
+#define TWL4030_BASEADD_MADC		0x0000
+#define TWL4030_BASEADD_MAIN_CHARGE	0x0074
+#define TWL4030_BASEADD_PRECHARGE	0x00AA
+#define TWL4030_BASEADD_PWM0		0x00F8
+#define TWL4030_BASEADD_PWM1		0x00FB
+#define TWL4030_BASEADD_PWMA		0x00EF
+#define TWL4030_BASEADD_PWMB		0x00F1
+#define TWL4030_BASEADD_KEYPAD		0x00D2
+
+/* subchip/slave 3 - POWER ID */
+#define TWL4030_BASEADD_BACKUP		0x0014
+#define TWL4030_BASEADD_INT		0x002E
+#define TWL4030_BASEADD_PM_MASTER	0x0036
+#define TWL4030_BASEADD_PM_RECEIVER	0x005B
+#define TWL4030_BASEADD_RTC		0x001C
+#define TWL4030_BASEADD_SECURED_REG	0x0000
+
+/* Triton Core internal information (END) */
+
+
+/* Few power values */
+#define R_CFG_BOOT			0x05
+#define R_PROTECT_KEY			0x0E
+
+/* access control values for R_PROTECT_KEY */
+#define KEY_UNLOCK1			0xce
+#define KEY_UNLOCK2			0xec
+#define KEY_LOCK			0x00
+
+/* some fields in R_CFG_BOOT */
+#define HFCLK_FREQ_19p2_MHZ		(1 << 0)
+#define HFCLK_FREQ_26_MHZ		(2 << 0)
+#define HFCLK_FREQ_38p4_MHZ		(3 << 0)
+#define HIGH_PERF_SQ			(1 << 3)
+
+
+/*----------------------------------------------------------------------*/
+
+/**
+ * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init
+ * @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO)
+ * @sih_ctrl: address of module SIH_CTRL register
+ * @reg_cnt: number of IMR/ISR regs
+ * @imrs: pointer to array of TWL module interrupt mask register indices
+ * @isrs: pointer to array of TWL module interrupt status register indices
+ *
+ * Ties together TWL4030 modules and lists of IMR/ISR registers to mask/clear
+ * during twl_init_irq().
+ */
+struct twl4030_mod_iregs {
+	const u8 mod_no;
+	const u8 sih_ctrl;
+	const u8 reg_cnt;
+	const u8 *imrs;
+	const u8 *isrs;
+};
+
+/* TWL4030 INT module interrupt mask registers */
+static const u8 __initconst twl4030_int_imr_regs[] = {
+	TWL4030_INT_PWR_IMR1,
+	TWL4030_INT_PWR_IMR2,
+};
+
+/* TWL4030 INT module interrupt status registers */
+static const u8 __initconst twl4030_int_isr_regs[] = {
+	TWL4030_INT_PWR_ISR1,
+	TWL4030_INT_PWR_ISR2,
+};
+
+/* TWL4030 INTERRUPTS module interrupt mask registers */
+static const u8 __initconst twl4030_interrupts_imr_regs[] = {
+	TWL4030_INTERRUPTS_BCIIMR1A,
+	TWL4030_INTERRUPTS_BCIIMR1B,
+	TWL4030_INTERRUPTS_BCIIMR2A,
+	TWL4030_INTERRUPTS_BCIIMR2B,
+};
+
+/* TWL4030 INTERRUPTS module interrupt status registers */
+static const u8 __initconst twl4030_interrupts_isr_regs[] = {
+	TWL4030_INTERRUPTS_BCIISR1A,
+	TWL4030_INTERRUPTS_BCIISR1B,
+	TWL4030_INTERRUPTS_BCIISR2A,
+	TWL4030_INTERRUPTS_BCIISR2B,
+};
+
+/* TWL4030 MADC module interrupt mask registers */
+static const u8 __initconst twl4030_madc_imr_regs[] = {
+	TWL4030_MADC_IMR1,
+	TWL4030_MADC_IMR2,
+};
+
+/* TWL4030 MADC module interrupt status registers */
+static const u8 __initconst twl4030_madc_isr_regs[] = {
+	TWL4030_MADC_ISR1,
+	TWL4030_MADC_ISR2,
+};
+
+/* TWL4030 keypad module interrupt mask registers */
+static const u8 __initconst twl4030_keypad_imr_regs[] = {
+	TWL4030_KEYPAD_KEYP_IMR1,
+	TWL4030_KEYPAD_KEYP_IMR2,
+};
+
+/* TWL4030 keypad module interrupt status registers */
+static const u8 __initconst twl4030_keypad_isr_regs[] = {
+	TWL4030_KEYPAD_KEYP_ISR1,
+	TWL4030_KEYPAD_KEYP_ISR2,
+};
+
+/* TWL4030 GPIO module interrupt mask registers */
+static const u8 __initconst twl4030_gpio_imr_regs[] = {
+	REG_GPIO_IMR1A,
+	REG_GPIO_IMR1B,
+	REG_GPIO_IMR2A,
+	REG_GPIO_IMR2B,
+	REG_GPIO_IMR3A,
+	REG_GPIO_IMR3B,
+};
+
+/* TWL4030 GPIO module interrupt status registers */
+static const u8 __initconst twl4030_gpio_isr_regs[] = {
+	REG_GPIO_ISR1A,
+	REG_GPIO_ISR1B,
+	REG_GPIO_ISR2A,
+	REG_GPIO_ISR2B,
+	REG_GPIO_ISR3A,
+	REG_GPIO_ISR3B,
+};
+
+/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */
+static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = {
+	{
+		.mod_no	  = TWL4030_MODULE_INT,
+		.sih_ctrl = TWL4030_INT_PWR_SIH_CTRL,
+		.reg_cnt  = ARRAY_SIZE(twl4030_int_imr_regs),
+		.imrs	  = twl4030_int_imr_regs,
+		.isrs	  = twl4030_int_isr_regs,
+	},
+	{
+		.mod_no	  = TWL4030_MODULE_INTERRUPTS,
+		.sih_ctrl = TWL4030_INTERRUPTS_BCISIHCTRL,
+		.reg_cnt  = ARRAY_SIZE(twl4030_interrupts_imr_regs),
+		.imrs	  = twl4030_interrupts_imr_regs,
+		.isrs	  = twl4030_interrupts_isr_regs,
+	},
+	{
+		.mod_no	  = TWL4030_MODULE_MADC,
+		.sih_ctrl = TWL4030_MADC_SIH_CTRL,
+		.reg_cnt  = ARRAY_SIZE(twl4030_madc_imr_regs),
+		.imrs	  = twl4030_madc_imr_regs,
+		.isrs	  = twl4030_madc_isr_regs,
+	},
+	{
+		.mod_no	  = TWL4030_MODULE_KEYPAD,
+		.sih_ctrl = TWL4030_KEYPAD_KEYP_SIH_CTRL,
+		.reg_cnt  = ARRAY_SIZE(twl4030_keypad_imr_regs),
+		.imrs	  = twl4030_keypad_imr_regs,
+		.isrs	  = twl4030_keypad_isr_regs,
+	},
+	{
+		.mod_no	  = TWL4030_MODULE_GPIO,
+		.sih_ctrl = REG_GPIO_SIH_CTRL,
+		.reg_cnt  = ARRAY_SIZE(twl4030_gpio_imr_regs),
+		.imrs	  = twl4030_gpio_imr_regs,
+		.isrs	  = twl4030_gpio_isr_regs,
+	},
+};
+
+/*----------------------------------------------------------------*/
+
+/* is driver active, bound to a chip? */
+static bool inuse;
+
+/* Structure for each TWL4030 Slave */
+struct twl4030_client {
+	struct i2c_client *client;
+	u8 address;
+
+	/* max numb of i2c_msg required is for read =2 */
+	struct i2c_msg xfer_msg[2];
+
+	/* To lock access to xfer_msg */
+	struct mutex xfer_lock;
+};
+
+static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
+
+
+/* mapping the module id to slave id and base address */
+struct twl4030mapping {
+	unsigned char sid;	/* Slave ID */
+	unsigned char base;	/* base address */
+};
+
+static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
+	/*
+	 * NOTE:  don't change this table without updating the
+	 * <linux/i2c/twl4030.h> defines for TWL4030_MODULE_*
+	 * so they continue to match the order in this table.
+	 */
+
+	{ 0, TWL4030_BASEADD_USB },
+
+	{ 1, TWL4030_BASEADD_AUDIO_VOICE },
+	{ 1, TWL4030_BASEADD_GPIO },
+	{ 1, TWL4030_BASEADD_INTBR },
+	{ 1, TWL4030_BASEADD_PIH },
+	{ 1, TWL4030_BASEADD_TEST },
+
+	{ 2, TWL4030_BASEADD_KEYPAD },
+	{ 2, TWL4030_BASEADD_MADC },
+	{ 2, TWL4030_BASEADD_INTERRUPTS },
+	{ 2, TWL4030_BASEADD_LED },
+	{ 2, TWL4030_BASEADD_MAIN_CHARGE },
+	{ 2, TWL4030_BASEADD_PRECHARGE },
+	{ 2, TWL4030_BASEADD_PWM0 },
+	{ 2, TWL4030_BASEADD_PWM1 },
+	{ 2, TWL4030_BASEADD_PWMA },
+	{ 2, TWL4030_BASEADD_PWMB },
+
+	{ 3, TWL4030_BASEADD_BACKUP },
+	{ 3, TWL4030_BASEADD_INT },
+	{ 3, TWL4030_BASEADD_PM_MASTER },
+	{ 3, TWL4030_BASEADD_PM_RECEIVER },
+	{ 3, TWL4030_BASEADD_RTC },
+	{ 3, TWL4030_BASEADD_SECURED_REG },
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * TWL4030 doesn't have PIH mask, hence dummy function for mask
+ * and unmask of the (eight) interrupts reported at that level ...
+ * masking is only available from SIH (secondary) modules.
+ */
+
+static void twl4030_i2c_ackirq(unsigned int irq)
+{
+}
+
+static void twl4030_i2c_disableint(unsigned int irq)
+{
+}
+
+static void twl4030_i2c_enableint(unsigned int irq)
+{
+}
+
+static struct irq_chip twl4030_irq_chip = {
+	.name	= "twl4030",
+	.ack	= twl4030_i2c_ackirq,
+	.mask	= twl4030_i2c_disableint,
+	.unmask	= twl4030_i2c_enableint,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* Exported Functions */
+
+/**
+ * twl4030_i2c_write - Writes a n bit register in TWL4030
+ * @mod_no: module number
+ * @value: an array of num_bytes+1 containing data to write
+ * @reg: register address (just offset will do)
+ * @num_bytes: number of bytes to transfer
+ *
+ * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and
+ * valid data starts at Offset 1.
+ *
+ * Returns the result of operation - 0 is success
+ */
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+{
+	int ret;
+	int sid;
+	struct twl4030_client *twl;
+	struct i2c_msg *msg;
+
+	if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
+		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
+		return -EPERM;
+	}
+	sid = twl4030_map[mod_no].sid;
+	twl = &twl4030_modules[sid];
+
+	if (unlikely(!inuse)) {
+		pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
+		return -EPERM;
+	}
+	mutex_lock(&twl->xfer_lock);
+	/*
+	 * [MSG1]: fill the register address data
+	 * fill the data Tx buffer
+	 */
+	msg = &twl->xfer_msg[0];
+	msg->addr = twl->address;
+	msg->len = num_bytes + 1;
+	msg->flags = 0;
+	msg->buf = value;
+	/* over write the first byte of buffer with the register address */
+	*value = twl4030_map[mod_no].base + reg;
+	ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1);
+	mutex_unlock(&twl->xfer_lock);
+
+	/* i2cTransfer returns num messages.translate it pls.. */
+	if (ret >= 0)
+		ret = 0;
+	return ret;
+}
+EXPORT_SYMBOL(twl4030_i2c_write);
+
+/**
+ * twl4030_i2c_read - Reads a n bit register in TWL4030
+ * @mod_no: module number
+ * @value: an array of num_bytes containing data to be read
+ * @reg: register address (just offset will do)
+ * @num_bytes: number of bytes to transfer
+ *
+ * Returns result of operation - num_bytes is success else failure.
+ */
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+{
+	int ret;
+	u8 val;
+	int sid;
+	struct twl4030_client *twl;
+	struct i2c_msg *msg;
+
+	if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
+		pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
+		return -EPERM;
+	}
+	sid = twl4030_map[mod_no].sid;
+	twl = &twl4030_modules[sid];
+
+	if (unlikely(!inuse)) {
+		pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
+		return -EPERM;
+	}
+	mutex_lock(&twl->xfer_lock);
+	/* [MSG1] fill the register address data */
+	msg = &twl->xfer_msg[0];
+	msg->addr = twl->address;
+	msg->len = 1;
+	msg->flags = 0;	/* Read the register value */
+	val = twl4030_map[mod_no].base + reg;
+	msg->buf = &val;
+	/* [MSG2] fill the data rx buffer */
+	msg = &twl->xfer_msg[1];
+	msg->addr = twl->address;
+	msg->flags = I2C_M_RD;	/* Read the register value */
+	msg->len = num_bytes;	/* only n bytes */
+	msg->buf = value;
+	ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2);
+	mutex_unlock(&twl->xfer_lock);
+
+	/* i2cTransfer returns num messages.translate it pls.. */
+	if (ret >= 0)
+		ret = 0;
+	return ret;
+}
+EXPORT_SYMBOL(twl4030_i2c_read);
+
+/**
+ * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030
+ * @mod_no: module number
+ * @value: the value to be written 8 bit
+ * @reg: register address (just offset will do)
+ *
+ * Returns result of operation - 0 is success
+ */
+int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg)
+{
+
+	/* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */
+	u8 temp_buffer[2] = { 0 };
+	/* offset 1 contains the data */
+	temp_buffer[1] = value;
+	return twl4030_i2c_write(mod_no, temp_buffer, reg, 1);
+}
+EXPORT_SYMBOL(twl4030_i2c_write_u8);
+
+/**
+ * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030
+ * @mod_no: module number
+ * @value: the value read 8 bit
+ * @reg: register address (just offset will do)
+ *
+ * Returns result of operation - 0 is success
+ */
+int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg)
+{
+	return twl4030_i2c_read(mod_no, value, reg, 1);
+}
+EXPORT_SYMBOL(twl4030_i2c_read_u8);
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * do_twl4030_module_irq() is the desc->handle method for each of the twl4030
+ * module interrupts that doesn't chain to another irq_chip (GPIO, power, etc).
+ * It executes in kernel thread context.  On entry, cpu interrupts are disabled.
+ */
+static void do_twl4030_module_irq(unsigned int irq, irq_desc_t *desc)
+{
+	struct irqaction *action;
+	const unsigned int cpu = smp_processor_id();
+
+	/*
+	 * Earlier this was desc->triggered = 1;
+	 */
+	desc->status |= IRQ_LEVEL;
+
+	/*
+	 * The desc->handle method would normally call the desc->chip->ack
+	 * method here, but we won't bother since our ack method is NULL.
+	 */
+
+	if (!desc->depth) {
+		kstat_cpu(cpu).irqs[irq]++;
+
+		action = desc->action;
+		if (action) {
+			int ret;
+			int status = 0;
+			int retval = 0;
+
+			local_irq_enable();
+
+			do {
+				/* Call the ISR with cpu interrupts enabled */
+				ret = action->handler(irq, action->dev_id);
+				if (ret == IRQ_HANDLED)
+					status |= action->flags;
+				retval |= ret;
+				action = action->next;
+			} while (action);
+
+			if (status & IRQF_SAMPLE_RANDOM)
+				add_interrupt_randomness(irq);
+
+			local_irq_disable();
+
+			if (retval != IRQ_HANDLED)
+				printk(KERN_ERR "ISR for TWL4030 module"
+					" irq %d can't handle interrupt\n",
+					irq);
+
+			/*
+			 * Here is where we should call the unmask method, but
+			 * again we won't bother since it is NULL.
+			 */
+		} else
+			printk(KERN_CRIT "TWL4030 module irq %d has no ISR"
+					" but can't be masked!\n", irq);
+	} else
+		printk(KERN_CRIT "TWL4030 module irq %d is disabled but can't"
+				" be masked!\n", irq);
+}
+
+static unsigned twl4030_irq_base;
+
+static struct completion irq_event;
+
+/*
+ * This thread processes interrupts reported by the Primary Interrupt Handler.
+ */
+static int twl4030_irq_thread(void *data)
+{
+	long irq = (long)data;
+	irq_desc_t *desc = irq_desc + irq;
+	static unsigned i2c_errors;
+	const static unsigned max_i2c_errors = 100;
+
+	daemonize("twl4030-irq");
+	current->flags |= PF_NOFREEZE;
+
+	while (!kthread_should_stop()) {
+		int ret;
+		int module_irq;
+		u8 pih_isr;
+
+		/* Wait for IRQ, then read PIH irq status (also blocking) */
+		wait_for_completion_interruptible(&irq_event);
+
+		ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+					  REG_PIH_ISR_P1);
+		if (ret) {
+			pr_warning("%s: I2C error %d reading PIH ISR\n",
+					DRIVER_NAME, ret);
+			if (++i2c_errors >= max_i2c_errors) {
+				printk(KERN_ERR "Maximum I2C error count"
+						" exceeded.  Terminating %s.\n",
+						__func__);
+				break;
+			}
+			complete(&irq_event);
+			continue;
+		}
+
+		/* these handlers deal with the relevant SIH irq status */
+		local_irq_disable();
+		for (module_irq = twl4030_irq_base;
+				pih_isr;
+				pih_isr >>= 1, module_irq++) {
+			if (pih_isr & 0x1) {
+				irq_desc_t *d = irq_desc + module_irq;
+
+				d->handle_irq(module_irq, d);
+			}
+		}
+		local_irq_enable();
+
+		desc->chip->unmask(irq);
+	}
+
+	return 0;
+}
+
+/*
+ * do_twl4030_irq() is the desc->handle method for the twl4030 interrupt.
+ * This is a chained interrupt, so there is no desc->action method for it.
+ * Now we need to query the interrupt controller in the twl4030 to determine
+ * which module is generating the interrupt request.  However, we can't do i2c
+ * transactions in interrupt context, so we must defer that work to a kernel
+ * thread.  All we do here is acknowledge and mask the interrupt and wakeup
+ * the kernel thread.
+ */
+static void do_twl4030_irq(unsigned int irq, irq_desc_t *desc)
+{
+	const unsigned int cpu = smp_processor_id();
+
+	/*
+	 * Earlier this was desc->triggered = 1;
+	 */
+	desc->status |= IRQ_LEVEL;
+
+	/*
+	 * Acknowledge, clear _AND_ disable the interrupt.
+	 */
+	desc->chip->ack(irq);
+
+	if (!desc->depth) {
+		kstat_cpu(cpu).irqs[irq]++;
+
+		complete(&irq_event);
+	}
+}
+
+static struct task_struct * __init start_twl4030_irq_thread(long irq)
+{
+	struct task_struct *thread;
+
+	init_completion(&irq_event);
+	thread = kthread_run(twl4030_irq_thread, (void *)irq,
+			     "twl4030 irq %ld", irq);
+	if (!thread)
+		pr_err("%s: could not create twl4030 irq %ld thread!\n",
+		       DRIVER_NAME, irq);
+
+	return thread;
+}
+
+/*----------------------------------------------------------------------*/
+
+static int add_children(struct twl4030_platform_data *pdata)
+{
+	struct platform_device	*pdev = NULL;
+	struct twl4030_client	*twl = NULL;
+	int			status = 0;
+
+	if (twl_has_bci() && pdata->bci) {
+		twl = &twl4030_modules[3];
+
+		pdev = platform_device_alloc("twl4030_bci", -1);
+		if (!pdev) {
+			pr_debug("%s: can't alloc bci dev\n", DRIVER_NAME);
+			status = -ENOMEM;
+			goto err;
+		}
+
+		if (status == 0) {
+			pdev->dev.parent = &twl->client->dev;
+			status = platform_device_add_data(pdev, pdata->bci,
+					sizeof(*pdata->bci));
+			if (status < 0) {
+				dev_dbg(&twl->client->dev,
+					"can't add bci data, %d\n",
+					status);
+				goto err;
+			}
+		}
+
+		if (status == 0) {
+			struct resource r = {
+				.start = TWL4030_PWRIRQ_CHG_PRES,
+				.flags = IORESOURCE_IRQ,
+			};
+
+			status = platform_device_add_resources(pdev, &r, 1);
+		}
+
+		if (status == 0)
+			status = platform_device_add(pdev);
+
+		if (status < 0) {
+			platform_device_put(pdev);
+			dev_dbg(&twl->client->dev,
+					"can't create bci dev, %d\n",
+					status);
+			goto err;
+		}
+	}
+
+	if (twl_has_gpio() && pdata->gpio) {
+		twl = &twl4030_modules[1];
+
+		pdev = platform_device_alloc("twl4030_gpio", -1);
+		if (!pdev) {
+			pr_debug("%s: can't alloc gpio dev\n", DRIVER_NAME);
+			status = -ENOMEM;
+			goto err;
+		}
+
+		/* more driver model init */
+		if (status == 0) {
+			pdev->dev.parent = &twl->client->dev;
+			/* device_init_wakeup(&pdev->dev, 1); */
+
+			status = platform_device_add_data(pdev, pdata->gpio,
+					sizeof(*pdata->gpio));
+			if (status < 0) {
+				dev_dbg(&twl->client->dev,
+					"can't add gpio data, %d\n",
+					status);
+				goto err;
+			}
+		}
+
+		/* GPIO module IRQ */
+		if (status == 0) {
+			struct resource	r = {
+				.start = pdata->irq_base + 0,
+				.flags = IORESOURCE_IRQ,
+			};
+
+			status = platform_device_add_resources(pdev, &r, 1);
+		}
+
+		if (status == 0)
+			status = platform_device_add(pdev);
+
+		if (status < 0) {
+			platform_device_put(pdev);
+			dev_dbg(&twl->client->dev,
+					"can't create gpio dev, %d\n",
+					status);
+			goto err;
+		}
+	}
+
+	if (twl_has_keypad() && pdata->keypad) {
+		pdev = platform_device_alloc("twl4030_keypad", -1);
+		if (pdev) {
+			twl = &twl4030_modules[2];
+			pdev->dev.parent = &twl->client->dev;
+			device_init_wakeup(&pdev->dev, 1);
+			status = platform_device_add_data(pdev, pdata->keypad,
+					sizeof(*pdata->keypad));
+			if (status < 0) {
+				dev_dbg(&twl->client->dev,
+					"can't add keypad data, %d\n",
+					status);
+				platform_device_put(pdev);
+				goto err;
+			}
+			status = platform_device_add(pdev);
+			if (status < 0) {
+				platform_device_put(pdev);
+				dev_dbg(&twl->client->dev,
+						"can't create keypad dev, %d\n",
+						status);
+				goto err;
+			}
+		} else {
+			pr_debug("%s: can't alloc keypad dev\n", DRIVER_NAME);
+			status = -ENOMEM;
+			goto err;
+		}
+	}
+
+	if (twl_has_madc() && pdata->madc) {
+		pdev = platform_device_alloc("twl4030_madc", -1);
+		if (pdev) {
+			twl = &twl4030_modules[2];
+			pdev->dev.parent = &twl->client->dev;
+			device_init_wakeup(&pdev->dev, 1);
+			status = platform_device_add_data(pdev, pdata->madc,
+					sizeof(*pdata->madc));
+			if (status < 0) {
+				platform_device_put(pdev);
+				dev_dbg(&twl->client->dev,
+					"can't add madc data, %d\n",
+					status);
+				goto err;
+			}
+			status = platform_device_add(pdev);
+			if (status < 0) {
+				platform_device_put(pdev);
+				dev_dbg(&twl->client->dev,
+						"can't create madc dev, %d\n",
+						status);
+				goto err;
+			}
+		} else {
+			pr_debug("%s: can't alloc madc dev\n", DRIVER_NAME);
+			status = -ENOMEM;
+			goto err;
+		}
+	}
+
+	if (twl_has_rtc()) {
+		twl = &twl4030_modules[3];
+
+		pdev = platform_device_alloc("twl4030_rtc", -1);
+		if (!pdev) {
+			pr_debug("%s: can't alloc rtc dev\n", DRIVER_NAME);
+			status = -ENOMEM;
+		} else {
+			pdev->dev.parent = &twl->client->dev;
+			device_init_wakeup(&pdev->dev, 1);
+		}
+
+		/*
+		 * REVISIT platform_data here currently might use of
+		 * "msecure" line ... but for now we just expect board
+		 * setup to tell the chip "we are secure" at all times.
+		 * Eventually, Linux might become more aware of such
+		 * HW security concerns, and "least privilege".
+		 */
+
+		/* RTC module IRQ */
+		if (status == 0) {
+			struct resource	r = {
+				/* REVISIT don't hard-wire this stuff */
+				.start = TWL4030_PWRIRQ_RTC,
+				.flags = IORESOURCE_IRQ,
+			};
+
+			status = platform_device_add_resources(pdev, &r, 1);
+		}
+
+		if (status == 0)
+			status = platform_device_add(pdev);
+
+		if (status < 0) {
+			platform_device_put(pdev);
+			dev_dbg(&twl->client->dev,
+					"can't create rtc dev, %d\n",
+					status);
+			goto err;
+		}
+	}
+
+	if (twl_has_usb() && pdata->usb) {
+		twl = &twl4030_modules[0];
+
+		pdev = platform_device_alloc("twl4030_usb", -1);
+		if (!pdev) {
+			pr_debug("%s: can't alloc usb dev\n", DRIVER_NAME);
+			status = -ENOMEM;
+			goto err;
+		}
+
+		if (status == 0) {
+			pdev->dev.parent = &twl->client->dev;
+			device_init_wakeup(&pdev->dev, 1);
+			status = platform_device_add_data(pdev, pdata->usb,
+					sizeof(*pdata->usb));
+			if (status < 0) {
+				platform_device_put(pdev);
+				dev_dbg(&twl->client->dev,
+					"can't add usb data, %d\n",
+					status);
+				goto err;
+			}
+		}
+
+		if (status == 0) {
+			struct resource r = {
+				.start = TWL4030_PWRIRQ_USB_PRES,
+				.flags = IORESOURCE_IRQ,
+			};
+
+			status = platform_device_add_resources(pdev, &r, 1);
+		}
+
+		if (status == 0)
+			status = platform_device_add(pdev);
+
+		if (status < 0) {
+			platform_device_put(pdev);
+			dev_dbg(&twl->client->dev,
+					"can't create usb dev, %d\n",
+					status);
+		}
+	}
+
+err:
+	if (status)
+		pr_err("failed to add twl4030's children (status %d)\n", status);
+	return status;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * These three functions initialize the on-chip clock framework,
+ * letting it generate the right frequencies for USB, MADC, and
+ * other purposes.
+ */
+static inline int __init protect_pm_master(void)
+{
+	int e = 0;
+
+	e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK,
+			R_PROTECT_KEY);
+	return e;
+}
+
+static inline int __init unprotect_pm_master(void)
+{
+	int e = 0;
+
+	e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1,
+			R_PROTECT_KEY);
+	e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2,
+			R_PROTECT_KEY);
+	return e;
+}
+
+static void __init clocks_init(void)
+{
+	int e = 0;
+	struct clk *osc;
+	u32 rate;
+	u8 ctrl = HFCLK_FREQ_26_MHZ;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (cpu_is_omap2430())
+		osc = clk_get(NULL, "osc_ck");
+	else
+		osc = clk_get(NULL, "osc_sys_ck");
+#else
+	/* REVISIT for non-OMAP systems, pass the clock rate from
+	 * board init code, using platform_data.
+	 */
+	osc = ERR_PTR(-EIO);
+#endif
+	if (IS_ERR(osc)) {
+		printk(KERN_WARNING "Skipping twl4030 internal clock init and "
+				"using bootloader value (unknown osc rate)\n");
+		return;
+	}
+
+	rate = clk_get_rate(osc);
+	clk_put(osc);
+
+	switch (rate) {
+	case 19200000:
+		ctrl = HFCLK_FREQ_19p2_MHZ;
+		break;
+	case 26000000:
+		ctrl = HFCLK_FREQ_26_MHZ;
+		break;
+	case 38400000:
+		ctrl = HFCLK_FREQ_38p4_MHZ;
+		break;
+	}
+
+	ctrl |= HIGH_PERF_SQ;
+	e |= unprotect_pm_master();
+	/* effect->MADC+USB ck en */
+	e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
+	e |= protect_pm_master();
+
+	if (e < 0)
+		pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
+}
+
+/*----------------------------------------------------------------------*/
+
+/**
+ * twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write
+ * @mod_no: TWL4030 module number
+ * @reg: register index to clear
+ * @cor: value of the <module>_SIH_CTRL.COR bit (1 or 0)
+ *
+ * Either reads (cor == 1) or writes (cor == 0) to a TWL4030 interrupt
+ * status register to ensure that any prior interrupts are cleared.
+ * Returns the status from the I2C read operation.
+ */
+static int __init twl4030_i2c_clear_isr(u8 mod_no, u8 reg, u8 cor)
+{
+	u8 tmp;
+
+	return (cor) ? twl4030_i2c_read_u8(mod_no, &tmp, reg) :
+		twl4030_i2c_write_u8(mod_no, 0xff, reg);
+}
+
+/**
+ * twl4030_read_cor_bit - are TWL module ISRs cleared by reads or writes?
+ * @mod_no: TWL4030 module number
+ * @reg: register index to clear
+ *
+ * Returns 1 if the TWL4030 SIH interrupt status registers (ISRs) for
+ * the specified TWL module are cleared by reads, or 0 if cleared by
+ * writes.
+ */
+static int twl4030_read_cor_bit(u8 mod_no, u8 reg)
+{
+	u8 tmp = 0;
+
+	WARN_ON(twl4030_i2c_read_u8(mod_no, &tmp, reg) < 0);
+
+	tmp &= TWL4030_SIH_CTRL_COR_MASK;
+	tmp >>= __ffs(TWL4030_SIH_CTRL_COR_MASK);
+
+	return tmp;
+}
+
+/**
+ * twl4030_mask_clear_intrs - mask and clear all TWL4030 interrupts
+ * @t: pointer to twl4030_mod_iregs array
+ * @t_sz: ARRAY_SIZE(t) (starting at 1)
+ *
+ * Mask all TWL4030 interrupt mask registers (IMRs) and clear all
+ * interrupt status registers (ISRs).  No return value, but will WARN if
+ * any I2C operations fail.
+ */
+static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t,
+					    const u8 t_sz)
+{
+	int i, j;
+
+	/*
+	 * N.B. - further efficiency is possible here.  Eight I2C
+	 * operations on BCI and GPIO modules are avoidable if I2C
+	 * burst read/write transactions were implemented.  Would
+	 * probably save about 1ms of boot time and a small amount of
+	 * power.
+	 */
+	for (i = 0; i < t_sz; i++) {
+		const struct twl4030_mod_iregs tmr = t[i];
+		int cor;
+
+		/* Are ISRs cleared by reads or writes? */
+		cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl);
+
+		for (j = 0; j < tmr.reg_cnt; j++) {
+
+			/* Mask interrupts at the TWL4030 */
+			WARN_ON(twl4030_i2c_write_u8(tmr.mod_no, 0xff,
+						     tmr.imrs[j]) < 0);
+
+			/* Clear TWL4030 ISRs */
+			WARN_ON(twl4030_i2c_clear_isr(tmr.mod_no,
+						      tmr.isrs[j], cor) < 0);
+		}
+	}
+}
+
+
+static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
+{
+	int	i;
+
+	/*
+	 * Mask and clear all TWL4030 interrupts since initially we do
+	 * not have any TWL4030 module interrupt handlers present
+	 */
+	twl4030_mask_clear_intrs(twl4030_mod_regs,
+				 ARRAY_SIZE(twl4030_mod_regs));
+
+	twl4030_irq_base = irq_base;
+
+	/* install an irq handler for each of the PIH modules */
+	for (i = irq_base; i < irq_end; i++) {
+		set_irq_chip_and_handler(i, &twl4030_irq_chip,
+				do_twl4030_module_irq);
+		activate_irq(i);
+	}
+
+	/* install an irq handler to demultiplex the TWL4030 interrupt */
+	set_irq_data(irq_num, start_twl4030_irq_thread(irq_num));
+	set_irq_chained_handler(irq_num, do_twl4030_irq);
+}
+
+/*----------------------------------------------------------------------*/
+
+static int twl4030_remove(struct i2c_client *client)
+{
+	unsigned i;
+
+	/* FIXME undo twl_init_irq() */
+	if (twl4030_irq_base) {
+		dev_err(&client->dev, "can't yet clean up IRQs?\n");
+		return -ENOSYS;
+	}
+
+	for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
+		struct twl4030_client	*twl = &twl4030_modules[i];
+
+		if (twl->client && twl->client != client)
+			i2c_unregister_device(twl->client);
+		twl4030_modules[i].client = NULL;
+	}
+	inuse = false;
+	return 0;
+}
+
+/* NOTE:  this driver only handles a single twl4030/tps659x0 chip */
+static int
+twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int				status;
+	unsigned			i;
+	struct twl4030_platform_data	*pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_dbg(&client->dev, "no platform data?\n");
+		return -EINVAL;
+	}
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
+		dev_dbg(&client->dev, "can't talk I2C?\n");
+		return -EIO;
+	}
+
+	if (inuse || twl4030_irq_base) {
+		dev_dbg(&client->dev, "driver is already in use\n");
+		return -EBUSY;
+	}
+
+	for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
+		struct twl4030_client	*twl = &twl4030_modules[i];
+
+		twl->address = client->addr + i;
+		if (i == 0)
+			twl->client = client;
+		else {
+			twl->client = i2c_new_dummy(client->adapter,
+					twl->address);
+			if (!twl->client) {
+				dev_err(&twl->client->dev,
+					"can't attach client %d\n", i);
+				status = -ENOMEM;
+				goto fail;
+			}
+			strlcpy(twl->client->name, id->name,
+					sizeof(twl->client->name));
+		}
+		mutex_init(&twl->xfer_lock);
+	}
+	inuse = true;
+
+	/* setup clock framework */
+	clocks_init();
+
+	/* Maybe init the T2 Interrupt subsystem */
+	if (client->irq
+			&& pdata->irq_base
+			&& pdata->irq_end > pdata->irq_base) {
+		twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
+		dev_info(&client->dev, "IRQ %d chains IRQs %d..%d\n",
+				client->irq, pdata->irq_base, pdata->irq_end - 1);
+	}
+
+	status = add_children(pdata);
+fail:
+	if (status < 0)
+		twl4030_remove(client);
+	return status;
+}
+
+static const struct i2c_device_id twl4030_ids[] = {
+	{ "twl4030", 0 },	/* "Triton 2" */
+	{ "tps65950", 0 },	/* catalog version of twl4030 */
+	{ "tps65930", 0 },	/* fewer LDOs and DACs; no charger */
+	{ "tps65920", 0 },	/* fewer LDOs; no codec or charger */
+	{ "twl5030", 0 },	/* T2 updated */
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(i2c, twl4030_ids);
+
+/* One Client Driver , 4 Clients */
+static struct i2c_driver twl4030_driver = {
+	.driver.name	= DRIVER_NAME,
+	.id_table	= twl4030_ids,
+	.probe		= twl4030_probe,
+	.remove		= twl4030_remove,
+};
+
+static int __init twl4030_init(void)
+{
+	return i2c_add_driver(&twl4030_driver);
+}
+subsys_initcall(twl4030_init);
+
+static void __exit twl4030_exit(void)
+{
+	i2c_del_driver(&twl4030_driver);
+}
+module_exit(twl4030_exit);
+
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_DESCRIPTION("I2C Core interface for TWL4030");
+MODULE_LICENSE("GPL");