[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360
Compatible names should refer to a specific version of the hardware,
without wildcards. Change each instance of mv64x60 to mv64360, which
is the oldest version we currently support.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
index 822aac7..cb26b00 100644
--- a/arch/powerpc/boot/dts/prpmc2800.dts
+++ b/arch/powerpc/boot/dts/prpmc2800.dts
@@ -46,7 +46,7 @@
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
- compatible = "marvell,mv64x60";
+ compatible = "marvell,mv64360";
clock-frequency = <133333333>;
reg = <0xf1000000 0x10000>;
virtual-reg = <0xf1000000>;
@@ -74,7 +74,7 @@
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
- compatible = "marvell,mv64x60-mdio";
+ compatible = "marvell,mv64360-mdio";
PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
@@ -95,7 +95,7 @@
reg = <0x2000 0x2000>;
eth0 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "marvell,mv64360-eth";
block-index = <0>;
interrupts = <32>;
interrupt-parent = <&PIC>;
@@ -104,7 +104,7 @@
};
eth1 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
+ compatible = "marvell,mv64360-eth";
block-index = <1>;
interrupts = <33>;
interrupt-parent = <&PIC>;
@@ -115,7 +115,7 @@
SDMA0: sdma@4000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "marvell,mv64360-sdma";
reg = <0x4000 0xc18>;
virtual-reg = <0xf1004000>;
interrupt-base = <0>;
@@ -125,7 +125,7 @@
SDMA1: sdma@6000 {
device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
+ compatible = "marvell,mv64360-sdma";
reg = <0x6000 0xc18>;
virtual-reg = <0xf1006000>;
interrupt-base = <0>;
@@ -134,7 +134,7 @@
};
BRG0: brg@b200 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "marvell,mv64360-brg";
reg = <0xb200 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
@@ -143,7 +143,7 @@
};
BRG1: brg@b208 {
- compatible = "marvell,mv64x60-brg";
+ compatible = "marvell,mv64360-brg";
reg = <0xb208 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
@@ -166,7 +166,7 @@
MPSC0: mpsc@8000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;
sdma = <&SDMA0>;
@@ -186,7 +186,7 @@
MPSC1: mpsc@9000 {
device_type = "serial";
- compatible = "marvell,mpsc";
+ compatible = "marvell,mv64360-mpsc";
reg = <0x9000 0x38>;
virtual-reg = <0xf1009000>;
sdma = <&SDMA1>;
@@ -205,14 +205,14 @@
};
wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64x60-wdt";
+ compatible = "marvell,mv64360-wdt";
reg = <0xb410 0x8>;
timeout = <10>; /* wdt timeout in seconds */
};
i2c@c000 {
device_type = "i2c";
- compatible = "marvell,mv64x60-i2c";
+ compatible = "marvell,mv64360-i2c";
reg = <0xc000 0x20>;
virtual-reg = <0xf100c000>;
freq_m = <8>;
@@ -226,18 +226,18 @@
PIC: pic {
#interrupt-cells = <1>;
#address-cells = <0>;
- compatible = "marvell,mv64x60-pic";
+ compatible = "marvell,mv64360-pic";
reg = <0x0 0x88>;
interrupt-controller;
};
mpp@f000 {
- compatible = "marvell,mv64x60-mpp";
+ compatible = "marvell,mv64360-mpp";
reg = <0xf000 0x10>;
};
gpp@f100 {
- compatible = "marvell,mv64x60-gpp";
+ compatible = "marvell,mv64360-gpp";
reg = <0xf100 0x20>;
};
@@ -246,7 +246,7 @@
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
- compatible = "marvell,mv64x60-pci";
+ compatible = "marvell,mv64360-pci";
reg = <0xcf8 0x8>;
ranges = <0x01000000 0x0 0x0
0x88000000 0x0 0x01000000
@@ -285,28 +285,28 @@
};
cpu-error@0070 {
- compatible = "marvell,mv64x60-cpu-error";
+ compatible = "marvell,mv64360-cpu-error";
reg = <0x70 0x10 0x128 0x28>;
interrupts = <3>;
interrupt-parent = <&PIC>;
};
sram-ctrl@0380 {
- compatible = "marvell,mv64x60-sram-ctrl";
+ compatible = "marvell,mv64360-sram-ctrl";
reg = <0x380 0x80>;
interrupts = <13>;
interrupt-parent = <&PIC>;
};
pci-error@1d40 {
- compatible = "marvell,mv64x60-pci-error";
+ compatible = "marvell,mv64360-pci-error";
reg = <0x1d40 0x40 0xc28 0x4>;
interrupts = <12>;
interrupt-parent = <&PIC>;
};
mem-ctrl@1400 {
- compatible = "marvell,mv64x60-mem-ctrl";
+ compatible = "marvell,mv64360-mem-ctrl";
reg = <0x1400 0x60>;
interrupts = <17>;
interrupt-parent = <&PIC>;