diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index 6434f0d..6cd6dae 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -20,7 +20,7 @@
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
@@ -40,11 +40,11 @@
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
-			measure func=INODE_PERM mask=MAY_READ uid=0
+			measure func=FILE_CHECK mask=MAY_READ uid=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in inode_permission.
+		open for read by root in do_filp_open.
 
 		Examples of LSM specific definitions:
 
@@ -54,8 +54,8 @@
 
 			dont_measure obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
-			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
-			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
 		Smack:
-			measure subj_user=_ func=INODE_PERM mask=MAY_READ
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index aed082f..737988f 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -145,8 +145,8 @@
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
-to its default value of '80' it means that between the checking
-intervals the CPU needs to be on average more than 80% in use to then
+to its default value of '95' it means that between the checking
+intervals the CPU needs to be on average more than 95% in use to then
 decide that the CPU frequency needs to be increased.  
 
 ignore_nice_load: this parameter takes a value of '0' or '1'. When
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 0793056..7be15e4 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -143,8 +143,8 @@
   failslab, fail_page_alloc, and fail_make_request use this way.
   Helper functions:
 
-	init_fault_attr_entries(entries, attr, name);
-	void cleanup_fault_attr_entries(entries);
+	init_fault_attr_dentries(entries, attr, name);
+	void cleanup_fault_attr_dentries(entries);
 
 - module parameters
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 870d190..0a46833 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -493,3 +493,52 @@
 Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
+
+What:	usbvideo quickcam_messenger driver
+When:	2.6.35
+Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv06xx
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ov511 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/ov511.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	w9968cf v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/w9968cf*.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_ov519
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	ovcamchip sensor framework
+When:	2.6.35
+Files:	drivers/media/video/ovcamchip/*
+Why:	Only used by obsoleted v4l1 drivers
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	stv680 v4l1 driver
+When:	2.6.35
+Files:	drivers/media/video/stv680.[ch]
+Why:	obsolete v4l1 driver replaced by gspca_stv0680
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	zc0301 v4l driver
+When:	2.6.35
+Files:	drivers/media/video/zc0301/*
+Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
+	supports 2 USB-ID's (because it only supports a limited set of
+	sensors) wich are also supported by the gspca_zc3xx driver
+	(which supports 53 USB-ID's in total)
+Who:	Hans de Goede <hdegoede@redhat.com>
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index a12ea3b..8490480 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -27,12 +27,30 @@
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
-minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
-ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
-device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
-ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
+allows for multiple fingers to be tracked.  If the device supports it, the
+ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the contact area and approaching finger, respectively.
+
+The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
+looking through a window at someone gently holding a finger against the
+glass.  You will see two regions, one inner region consisting of the part
+of the finger actually touching the glass, and one outer region formed by
+the perimeter of the finger. The diameter of the inner region is the
+ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
+ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
+against the glass. The inner region will increase, and in general, the
+ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
+unity, is related to the finger pressure. For pressure-based devices,
+ABS_MT_PRESSURE may be used to provide the pressure on the contact area
+instead.
+
+In addition to the MAJOR parameters, the oval shape of the finger can be
+described by adding the MINOR parameters, such that MAJOR and MINOR are the
+major and minor axis of an ellipse. Finally, the orientation of the oval
+shape can be describe with the ORIENTATION parameter.
+
+The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
 finger or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
@@ -42,11 +60,9 @@
 Here is what a minimal event sequence for a two-finger touch would look
 like:
 
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
-   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
@@ -87,6 +103,12 @@
 the notion of pressure. The fingers of the hand and the palm all have
 different characteristic widths [1].
 
+ABS_MT_PRESSURE
+
+The pressure, in arbitrary units, on the contact area. May be used instead
+of TOUCH and WIDTH for pressure-based devices or any device with a spatial
+signal intensity distribution.
+
 ABS_MT_ORIENTATION
 
 The orientation of the ellipse. The value should describe a signed quarter
@@ -170,6 +192,16 @@
 make use of these native identifiers to reduce bandwidth and cpu usage.
 
 
+Gestures
+--------
+
+In the specific application of creating gesture events, the TOUCH and WIDTH
+parameters can be used to, e.g., approximate finger pressure or distinguish
+between index finger and thumb. With the addition of the MINOR parameters,
+one can also distinguish between a sweeping finger and a pointing finger,
+and with ORIENTATION, one can detect twisting of fingers.
+
+
 Notes
 -----
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 736d456..e7848a0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -199,6 +199,10 @@
 			acpi_display_output=video
 			See above.
 
+	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
+				early. Needed on some platforms to properly
+				initialize the EC.
+
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode
@@ -311,6 +315,11 @@
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
+	alignment=	[KNL,ARM]
+			Allow the default userspace alignment fault handler
+			behaviour to be specified.  Bit 0 enables warnings,
+			bit 1 enables fixups, and bit 2 sends a segfault.
+
 	amd_iommu=	[HW,X86-84]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 006b39d..e87f3cdc 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1074,10 +1074,10 @@
 	Default: 5
 
 max_addresses - INTEGER
-	Number of maximum addresses per interface.  0 disables limitation.
-	It is recommended not set too large value (or 0) because it would
-	be too easy way to crash kernel to allow to create too much of
-	autoconfigured addresses.
+	Maximum number of autoconfigured addresses per interface.  Setting
+	to zero disables the limitation.  It is not recommended to set this
+	value too large (or to zero) because it would be an easy way to
+	crash the kernel by allowing too many addresses to be created.
 	Default: 16
 
 disable_ipv6 - BOOLEAN
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
index 239f14b..6a5a579 100644
--- a/Documentation/trace/ftrace-design.txt
+++ b/Documentation/trace/ftrace-design.txt
@@ -1,5 +1,6 @@
 		function tracer guts
 		====================
+		By Mike Frysinger
 
 Introduction
 ------------
@@ -173,14 +174,16 @@
 
 	unsigned long *frompc = &...;
 	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
-	prepare_ftrace_return(frompc, selfpc);
+	/* passing frame pointer up is optional -- see below */
+	prepare_ftrace_return(frompc, selfpc, frame_pointer);
 
 	/* restore all state needed by the ABI */
 }
 #endif
 
-For information on how to implement prepare_ftrace_return(), simply look at
-the x86 version.  The only architecture-specific piece in it is the setup of
+For information on how to implement prepare_ftrace_return(), simply look at the
+x86 version (the frame pointer passing is optional; see the next section for
+more information).  The only architecture-specific piece in it is the setup of
 the fault recovery table (the asm(...) code).  The rest should be the same
 across architectures.
 
@@ -205,6 +208,23 @@
 #endif
 
 
+HAVE_FUNCTION_GRAPH_FP_TEST
+---------------------------
+
+An arch may pass in a unique value (frame pointer) to both the entering and
+exiting of a function.  On exit, the value is compared and if it does not
+match, then it will panic the kernel.  This is largely a sanity check for bad
+code generation with gcc.  If gcc for your port sanely updates the frame
+pointer under different opitmization levels, then ignore this option.
+
+However, adding support for it isn't terribly difficult.  In your assembly code
+that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
+Then in the C version of that function, do what the x86 port does and pass it
+along to ftrace_push_return_trace() instead of a stub value of 0.
+
+Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
+
+
 HAVE_FTRACE_NMI_ENTER
 ---------------------
 
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 8179692..bab3040 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1625,7 +1625,7 @@
 
  # echo sys_nanosleep hrtimer_interrupt \
 		> set_ftrace_filter
- # echo ftrace > current_tracer
+ # echo function > current_tracer
  # echo 1 > tracing_enabled
  # usleep 1
  # echo 0 > tracing_enabled
diff --git a/MAINTAINERS b/MAINTAINERS
index 175da7c..2123f6a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -410,9 +410,8 @@
 
 ALPHA PORT
 M:	Richard Henderson <rth@twiddle.net>
-S:	Odd Fixes for 2.4; Maintained for 2.6.
 M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-S:	Maintained for 2.4; PCI support for 2.6.
+M:	Matt Turner <mattst88@gmail.com>
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
@@ -617,10 +616,10 @@
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://gitorious.org/linux-gemini/mainline.git
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -642,9 +641,9 @@
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Odd Fixes
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
@@ -988,7 +987,6 @@
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 M:	Dan Williams <dan.j.williams@intel.com>
-M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 W:	http://sourceforge.net/projects/xscaleiop
 S:	Supported
 F:	Documentation/crypto/async-tx-api.txt
@@ -1638,9 +1636,8 @@
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-M:	Hans Verkuil <hverkuil@xs4all.nl>
 M:	Andy Walls <awalls@radix.net>
-L:	ivtv-devel@ivtvdriver.org
+L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://linuxtv.org
@@ -1736,10 +1733,9 @@
 F:	net/dccp/
 
 DECnet NETWORK LAYER
-M:	Christine Caulfield <christine.caulfield@googlemail.com>
 W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
-S:	Maintained
+S:	Orphan
 F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
@@ -1825,7 +1821,6 @@
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
@@ -2788,7 +2783,7 @@
 F:	arch/x86/kernel/microcode_intel.c
 
 INTEL I/OAT DMA DRIVER
-M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/ioat*
 
@@ -2826,10 +2821,11 @@
 S:	Maintained
 F:	drivers/net/ixp2000/
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Bruce Allan <bruce.w.allan@intel.com>
+M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
@@ -2839,6 +2835,7 @@
 F:	drivers/net/e1000/
 F:	drivers/net/e1000e/
 F:	drivers/net/igb/
+F:	drivers/net/igbvf/
 F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
@@ -3012,8 +3009,8 @@
 F:	drivers/isdn/hardware/eicon/
 
 IVTV VIDEO4LINUX DRIVER
-M:	Hans Verkuil <hverkuil@xs4all.nl>
-L:	ivtv-devel@ivtvdriver.org
+M:	Andy Walls <awalls@radix.net>
+L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.ivtvdriver.org
@@ -3413,8 +3410,10 @@
 F:	drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-M:	Subrata Modak <subrata@linux.vnet.ibm.com>
-M:	Mike Frysinger <vapier@gentoo.org>
+M:	Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
+M:	Garrett Cooper <yanegomi@gmail.com>
+M:     Mike Frysinger <vapier@gentoo.org>
+M:     Subrata Modak <subrata@linux.vnet.ibm.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
@@ -3490,9 +3489,9 @@
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
-M:	Lennert Buytenhek <buytenh@marvell.com>
+M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
@@ -3838,6 +3837,7 @@
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 S:	Odd Fixes
 F:	drivers/net/
 F:	include/linux/if_*
diff --git a/Makefile b/Makefile
index 9f64552..1b24895 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc4
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -18,10 +18,9 @@
 
 # Avoid funny character set dependencies
 unexport LC_ALL
-LC_CTYPE=C
 LC_COLLATE=C
 LC_NUMERIC=C
-export LC_CTYPE LC_COLLATE LC_NUMERIC
+export LC_COLLATE LC_NUMERIC
 
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.
diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
index 36b3a30..9251e13 100644
--- a/arch/alpha/include/asm/topology.h
+++ b/arch/alpha/include/asm/topology.h
@@ -28,6 +28,9 @@
 {
 	int cpu;
 
+	if (node == -1)
+		return cpu_all_mask;
+
 	cpumask_clear(&node_to_cpumask_map[node]);
 
 	for_each_online_cpu(cpu) {
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c2238cd..184a6bd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -702,6 +702,7 @@
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -729,14 +730,26 @@
 
 endchoice
 
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-h720x/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -751,16 +764,26 @@
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-msm/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
 
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
 
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
+
+source "arch/arm/mach-ns9xxx/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
 
@@ -770,9 +793,14 @@
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
 
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
@@ -800,41 +828,14 @@
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-w90x900/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e9da084..356d702 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,7 @@
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
@@ -146,6 +146,7 @@
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
@@ -171,12 +172,12 @@
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
@@ -184,7 +185,6 @@
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
 plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
-plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d356af7..4fddc50 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -27,6 +27,14 @@
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
+#elif defined(CONFIG_CPU_V7)
+		.macro	loadsp, rb
+		.endm
+		.macro	writeb, ch, rb
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+		mcr	p14, 0, \ch, c0, c5, 0
+		.endm
 #elif defined(CONFIG_CPU_XSCALE)
 		.macro	loadsp, rb
 		.endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 7e0fe4d..56a0d11 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -53,6 +53,18 @@
 
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+	asm(
+	"wait:	mrc	p14, 0, pc, c0, c1, 0			\n\
+		bcs	wait					\n\
+		mcr     p14, 0, %0, c0, c5, 0			"
+	: : "r" (ch));
+}
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 static void icedcc_putc(int ch)
@@ -88,7 +100,6 @@
 #endif
 
 #define putc(ch)	icedcc_putc(ch)
-#define flush()	do { } while (0)
 #endif
 
 static void putstr(const char *ptr)
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 730aefc..8113bb5 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -42,7 +42,8 @@
 #endif
 
 #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+    defined(CONFIG_CPU_ARM1026)
 # define MULTI_CACHE 1
 #endif
 
@@ -154,16 +155,16 @@
  *	Please note that the implementation of these, and the required
  *	effects are cache-type (VIVT/VIPT/PIPT) specific.
  *
- *	flush_cache_kern_all()
+ *	flush_kern_all()
  *
  *		Unconditionally clean and invalidate the entire cache.
  *
- *	flush_cache_user_mm(mm)
+ *	flush_user_all()
  *
  *		Clean and invalidate all user space cache entries
  *		before a change of page tables.
  *
- *	flush_cache_user_range(start, end, flags)
+ *	flush_user_range(start, end, flags)
  *
  *		Clean and invalidate a range of cache entries in the
  *		specified address space before a change of page tables.
@@ -179,6 +180,20 @@
  *		- start  - virtual start address
  *		- end    - virtual end address
  *
+ *	coherent_user_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	flush_kern_dcache_area(kaddr, size)
+ *
+ *		Ensure that the data held in page is written back.
+ *		- kaddr  - page address
+ *		- size   - region size
+ *
  *	DMA Cache Coherency
  *	===================
  *
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index b121b60..5c91add 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -49,6 +49,26 @@
 1002:
 		.endm
 
+#elif defined(CONFIG_CPU_V7)
+
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+busy:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	busy
+		.endm
+
+		.macro	waituart, rd, rx
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+
+		.endm
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 		.macro	addruart, rx
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 950391f..d4a0da1 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -78,15 +78,6 @@
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-	/*
-	 * If we have support for OABI programs, we can never allow NX
-	 * support - our signal syscall restart mechanism relies upon
-	 * being able to execute code placed on the user stack.
-	 */
-	return 1;
-#else
 	return 0;
-#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c6c57b6..621acad 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -102,6 +102,7 @@
 #endif
 #ifdef CONFIG_OUTER_CACHE
 struct outer_cache_fns outer_cache;
+EXPORT_SYMBOL(outer_cache);
 #endif
 
 struct stack {
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
index b4e21a2..7a560e0 100644
--- a/arch/arm/mach-davinci/include/mach/keyscan.h
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -29,6 +29,7 @@
 };
 
 struct davinci_ks_platform_data {
+	int		(*device_enable)(struct device *dev);
 	unsigned short	*keymap;
 	u32		keymapsize;
 	u8		rep:1;
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index e726385..fe3bd5a 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -86,7 +86,7 @@
 	unsigned int reg_both, reg_level, reg_type;
 
 	reg_type = __raw_readl(base + GPIO_INT_TYPE);
-	reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+	reg_level = __raw_readl(base + GPIO_INT_LEVEL);
 	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
 
 	switch (type) {
@@ -117,7 +117,7 @@
 	}
 
 	__raw_writel(reg_type, base + GPIO_INT_TYPE);
-	__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
 	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
 	gpio_ack_irq(irq);
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 59c5df7..5483f61 100644
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -30,7 +30,9 @@
 	UART[UART_TX] = c;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 /*
  * nothing to do
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 8bf4153..3bf6304 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@
 	 */
 	kirkwood_init();
 
+	orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+	if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+	    gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+		pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_sata_init(&rd88f6192_sata_data);
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 6e838b8..6acc88b 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -119,6 +119,11 @@
 	return get_rate_per(8);
 }
 
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+	return get_rate_per(5);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -144,7 +149,7 @@
 	__raw_writel(reg, clk->enable_reg);
 }
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= CRM_BASE + er,	\
@@ -153,27 +158,30 @@
 		.set_rate	= sr,			\
 		.enable		= clk_cgcr_enable,	\
 		.disable	= clk_cgcr_disable,	\
+		.secondary	= s,			\
 	}
 
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -208,13 +216,21 @@
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+	 * SCC
+	 */
+	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 921bc99..6f06089 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -91,7 +91,7 @@
 
 static void __init mx25pdk_timer_init(void)
 {
-	mx25_clocks_init(26000000);
+	mx25_clocks_init();
 }
 
 static struct sys_timer mx25pdk_timer = {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 3e7bafa..938c549 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -173,6 +173,7 @@
 }
 
 static struct irq_chip expio_irq_chip = {
+	.name = "EXPIO(CPLD)",
 	.ack = expio_ack_irq,
 	.mask = expio_mask_irq,
 	.unmask = expio_unmask_irq,
@@ -302,6 +303,7 @@
 		.min_uV = 2800000,
 		.max_uV = 2800000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 };
@@ -322,6 +324,7 @@
 		.min_uV = 3300000,
 		.max_uV = 3300000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -459,6 +462,7 @@
 
 static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 	.init = mx31_wm8350_init,
+	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
 };
 #endif
 
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 2ba9ab9..04f1d29 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -214,8 +214,8 @@
 	struct mpu_rate * ptr;
 	unsigned long dpll1_rate, ref_rate;
 
-	dpll1_rate = clk_get_rate(ck_dpll1_p);
-	ref_rate = clk_get_rate(ck_ref_p);
+	dpll1_rate = ck_dpll1_p->rate;
+	ref_rate = ck_ref_p->rate;
 
 	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
 		if (ptr->xtal != ref_rate)
@@ -306,7 +306,7 @@
 	long highest_rate;
 	unsigned long ref_rate;
 
-	ref_rate = clk_get_rate(ck_ref_p);
+	ref_rate = ck_ref_p->rate;
 
 	highest_rate = -EINVAL;
 
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index c6031d7..74930e3 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -671,7 +671,6 @@
 	.name		= "dpll4_m3x2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m3_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
 	.flags		= INVERT_ENABLE,
@@ -811,7 +810,6 @@
 	.name		= "dpll4_m6x2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m6_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
 	.flags		= INVERT_ENABLE,
@@ -1047,7 +1045,6 @@
 	.name		= "iva2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll2_m2_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
 	.clkdm_name	= "iva2_clkdm",
@@ -1121,7 +1118,6 @@
 	.name		= "gfx_l3_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP_EN_GFX_SHIFT,
 	.recalc		= &followparent_recalc,
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2210e22..9d882bc 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -346,37 +346,37 @@
 };
 
 static const struct clksel_rate div31_1to31_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 3, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 3, .flags = RATE_IN_4430 },
-	{ .div = 5, .val = 4, .flags = RATE_IN_4430 },
-	{ .div = 6, .val = 5, .flags = RATE_IN_4430 },
-	{ .div = 7, .val = 6, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 7, .flags = RATE_IN_4430 },
-	{ .div = 9, .val = 8, .flags = RATE_IN_4430 },
-	{ .div = 10, .val = 9, .flags = RATE_IN_4430 },
-	{ .div = 11, .val = 10, .flags = RATE_IN_4430 },
-	{ .div = 12, .val = 11, .flags = RATE_IN_4430 },
-	{ .div = 13, .val = 12, .flags = RATE_IN_4430 },
-	{ .div = 14, .val = 13, .flags = RATE_IN_4430 },
-	{ .div = 15, .val = 14, .flags = RATE_IN_4430 },
-	{ .div = 16, .val = 15, .flags = RATE_IN_4430 },
-	{ .div = 17, .val = 16, .flags = RATE_IN_4430 },
-	{ .div = 18, .val = 17, .flags = RATE_IN_4430 },
-	{ .div = 19, .val = 18, .flags = RATE_IN_4430 },
-	{ .div = 20, .val = 19, .flags = RATE_IN_4430 },
-	{ .div = 21, .val = 20, .flags = RATE_IN_4430 },
-	{ .div = 22, .val = 21, .flags = RATE_IN_4430 },
-	{ .div = 23, .val = 22, .flags = RATE_IN_4430 },
-	{ .div = 24, .val = 23, .flags = RATE_IN_4430 },
-	{ .div = 25, .val = 24, .flags = RATE_IN_4430 },
-	{ .div = 26, .val = 25, .flags = RATE_IN_4430 },
-	{ .div = 27, .val = 26, .flags = RATE_IN_4430 },
-	{ .div = 28, .val = 27, .flags = RATE_IN_4430 },
-	{ .div = 29, .val = 28, .flags = RATE_IN_4430 },
-	{ .div = 30, .val = 29, .flags = RATE_IN_4430 },
-	{ .div = 31, .val = 30, .flags = RATE_IN_4430 },
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
 	{ .div = 0 },
 };
 
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a26d6a0..12f0cbf 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -137,7 +137,7 @@
 	local_irq_enable();
 	local_fiq_enable();
 
-	return (u32)timespec_to_ns(&ts_idle)/1000;
+	return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index bd8cb59..7027cdc 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -505,7 +505,7 @@
 void __init gpmc_init(void)
 {
 	u32 l;
-	char *ck;
+	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
 		ck = "core_l3_ck";
@@ -521,6 +521,9 @@
 		l = OMAP44XX_GPMC_BASE;
 	}
 
+	if (WARN_ON(!ck))
+		return;
+
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
@@ -534,6 +537,8 @@
 		BUG();
 	}
 
+	clk_enable(gpmc_l3_clk);
+
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 	/* Set smart idle mode and automatic L3 clock gating */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a091b53..3d65c50 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -188,6 +188,8 @@
 	u16 hawkeye;
 	u8 rev;
 
+	omap_chip.oc = CHIP_IS_OMAP3430;
+
 	/*
 	 * We cannot access revision registers on ES1.0.
 	 * If the processor type is Cortex-A8 and the revision is 0x0
@@ -196,6 +198,7 @@
 	cpuid = read_cpuid(CPUID_ID);
 	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
 		omap_revision = OMAP3430_REV_ES1_0;
+		omap_chip.oc |= CHIP_IS_OMAP3430ES1;
 		return;
 	}
 
@@ -216,18 +219,28 @@
 		case 0: /* Take care of early samples */
 		case 1:
 			omap_revision = OMAP3430_REV_ES2_0;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
 			break;
 		case 2:
 			omap_revision = OMAP3430_REV_ES2_1;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
 			break;
 		case 3:
 			omap_revision = OMAP3430_REV_ES3_0;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
 			break;
 		case 4:
+			omap_revision = OMAP3430_REV_ES3_1;
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+			break;
+		case 7:
 		/* FALLTHROUGH */
 		default:
 			/* Use the latest known revision as default */
-			omap_revision = OMAP3430_REV_ES3_1;
+			omap_revision = OMAP3430_REV_ES3_1_2;
+
+			/* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		}
 		break;
 	case 0xb868:
@@ -235,14 +248,18 @@
 		 *
 		 * Set the device to be OMAP3505 here. Actual device
 		 * is identified later based on the features.
+		 *
+		 * REVISIT: AM3505/AM3517 should have their own CHIP_IS
 		 */
 		omap_revision = OMAP3505_REV(rev);
+		omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		break;
 	case 0xb891:
 	/* FALLTHROUGH */
 	default:
 		/* Unknown default to latest silicon rev as default*/
 		omap_revision = OMAP3630_REV_ES1_0;
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
 	}
 }
 
@@ -360,6 +377,7 @@
 		omap3_check_revision();
 		omap3_check_features();
 		omap3_cpuinfo();
+		return;
 	} else if (cpu_is_omap44xx()) {
 		omap4_check_revision();
 		return;
@@ -374,27 +392,14 @@
 	if (cpu_is_omap243x()) {
 		/* Currently only supports 2430ES2.1 and 2430-all */
 		omap_chip.oc |= CHIP_IS_OMAP2430;
+		return;
 	} else if (cpu_is_omap242x()) {
 		/* Currently only supports 2420ES2.1.1 and 2420-all */
 		omap_chip.oc |= CHIP_IS_OMAP2420;
-	} else if (cpu_is_omap3505() || cpu_is_omap3517()) {
-		omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
-	} else if (cpu_is_omap343x()) {
-		omap_chip.oc = CHIP_IS_OMAP3430;
-		if (omap_rev() == OMAP3430_REV_ES1_0)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-		else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
-			 omap_rev() <= OMAP3430_REV_ES2_1)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-		else if (omap_rev() == OMAP3430_REV_ES3_0)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
-		else if (omap_rev() == OMAP3430_REV_ES3_1)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
-		else if (omap_rev() == OMAP3630_REV_ES1_0)
-			omap_chip.oc |= CHIP_IS_OMAP3630ES1;
-	} else {
-		pr_err("Uninitialized omap_chip, please fix!\n");
+		return;
 	}
+
+	pr_err("Uninitialized omap_chip, please fix!\n");
 }
 
 /*
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index e9bc782..26aeef5 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -194,7 +194,7 @@
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		unsigned long base;
+		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
@@ -202,6 +202,8 @@
 		else if (cpu_is_omap34xx())
 			base = OMAP34XX_IC_BASE;
 
+		BUG_ON(!base);
+
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
 		if (!bank->base_reg) {
@@ -274,4 +276,22 @@
 	}
 	/* MIRs are saved and restore with other PRCM registers */
 }
+
+void omap3_intc_suspend(void)
+{
+	/* A pending interrupt would prevent OMAP from entering suspend */
+	omap_ack_irq(0);
+}
+
+void omap3_intc_prepare_idle(void)
+{
+	/* Disable autoidle as it can stall interrupt controller */
+	intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
+}
+
+void omap3_intc_resume_idle(void)
+{
+	/* Re-enable autoidle */
+	intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
+}
 #endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 0c3c72d..8afe9dd 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -408,6 +408,7 @@
 {
 	struct twl4030_hsmmc_info *c;
 	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+	int i;
 
 	if (cpu_is_omap2430()) {
 		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
@@ -434,7 +435,7 @@
 		mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 		if (!mmc) {
 			pr_err("Cannot allocate memory for mmc device!\n");
-			return;
+			goto done;
 		}
 
 		if (c->name)
@@ -532,6 +533,10 @@
 			continue;
 		c->dev = mmc->dev;
 	}
+
+done:
+	for (i = 0; i < nr_hsmmc; i++)
+		kfree(hsmmc_data[i]);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 459ef23a..5fef73f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -51,7 +51,7 @@
 static unsigned long mux_phys;
 static void __iomem *mux_base;
 
-static inline u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(u16 reg)
 {
 	if (cpu_is_omap24xx())
 		return __raw_readb(mux_base + reg);
@@ -59,7 +59,7 @@
 		return __raw_readw(mux_base + reg);
 }
 
-static inline void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(u16 val, u16 reg)
 {
 	if (cpu_is_omap24xx())
 		__raw_writeb(val, mux_base + reg);
@@ -67,6 +67,14 @@
 		__raw_writew(val, mux_base + reg);
 }
 
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		omap_mux_write(board_mux->value, board_mux->reg_offset);
+		board_mux++;
+	}
+}
+
 #if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
@@ -478,7 +486,7 @@
 static inline void omap_mux_decode(struct seq_file *s, u16 val)
 {
 	char *flags[OMAP_MUX_MAX_NR_FLAGS];
-	char mode[14];
+	char mode[sizeof("OMAP_MUX_MODE") + 1];
 	int i = -1;
 
 	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@@ -545,6 +553,7 @@
 		if (!m0_name)
 			continue;
 
+		/* REVISIT: Needs to be updated if mode0 names get longer */
 		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
 			if (m0_name[i] == '\0') {
 				m0_def[i] = m0_name[i];
@@ -833,14 +842,6 @@
 	kfree(options);
 }
 
-static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
-{
-	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		omap_mux_write(board_mux->value, board_mux->reg_offset);
-		board_mux++;
-	}
-}
-
 static int __init omap_mux_copy_names(struct omap_mux *src,
 					struct omap_mux *dst)
 {
@@ -960,7 +961,12 @@
 	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
 		struct omap_mux *entry;
 
-#ifndef CONFIG_OMAP_MUX
+#ifdef CONFIG_OMAP_MUX
+		if (!superset->muxnames || !superset->muxnames[0]) {
+			superset++;
+			continue;
+		}
+#else
 		/* Skip pins that are not muxed as GPIO by bootloader */
 		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
 			superset++;
@@ -998,12 +1004,15 @@
 		omap_mux_package_fixup(package_subset, superset);
 	if (package_balls)
 		omap_mux_package_init_balls(package_balls, superset);
-	omap_mux_set_cmdline_signals();
-	omap_mux_set_board_signals(board_mux);
 #endif
 
 	omap_mux_init_list(superset);
 
+#ifdef CONFIG_OMAP_MUX
+	omap_mux_set_cmdline_signals();
+	omap_mux_write_array(board_mux);
+#endif
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index d8b4d5a..f8c2e7a 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -147,6 +147,30 @@
 void omap_mux_set_gpio(u16 val, int gpio);
 
 /**
+ * omap_mux_read() - read mux register
+ * @mux_offset:		Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val:		New mux register value
+ * @mux_offset:		Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
+/**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:		Board specific mux table
  * @flags:		OMAP package type used for the board
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 68e0a59..07aa7b3 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -649,6 +649,53 @@
 	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
 		"uart3_tx_irtx", NULL, NULL, NULL,
 		"gpio_166", NULL, NULL, "safe_mode"),
+
+	/* Only on 3630, see omap36xx_cbp_subset for the signals */
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d8c8545..478ae58 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -94,7 +94,8 @@
 
 	oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
 
-	oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+	if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+		oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 860b755..a086626 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -54,8 +54,6 @@
 	regs[reg_count++].val = \
 			 __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
 
-static int __init pm_dbg_init(void);
-
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
 	struct reg {
@@ -167,6 +165,8 @@
 
 static int pm_dbg_init_done;
 
+static int __init pm_dbg_init(void);
+
 enum {
 	DEBUG_FILE_COUNTERS = 0,
 	DEBUG_FILE_TIMERS,
@@ -488,9 +488,11 @@
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-	*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	int ret;
+	ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	*val = ret;
 
-	if (*val >= 0)
+	if (ret >= 0)
 		return 0;
 	return *val;
 }
@@ -604,6 +606,4 @@
 }
 arch_initcall(pm_dbg_init);
 
-#else
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
 #endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 0bf345d..7a9c2d0 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -32,12 +32,16 @@
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 extern int pm_dbg_regset_save(int reg_set);
 extern int pm_dbg_regset_init(int reg_set);
 #else
-#define omap2_pm_dump(mode, resume, us)		do {} while (0);
-#define omap2_pm_debug				0
 #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
 #define pm_dbg_regset_save(reg_set) do {} while (0);
 #define pm_dbg_regset_init(reg_set) do {} while (0);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c6cc809..910a7ac 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -126,7 +127,15 @@
 	/* wait for the save to complete */
 	while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
 			& PADCONF_SAVE_DONE))
-		;
+		udelay(1);
+
+	/*
+	 * Force write last pad into memory, as this can fail in some
+	 * cases according to erratas 1.157, 1.185
+	 */
+	omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+		OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
 	/* Save the Interrupt controller context */
 	omap_intc_save_context();
 	/* Save the GPMC context */
@@ -392,6 +401,7 @@
 		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
 		omap3_enable_io_chain();
 	}
+	omap3_intc_prepare_idle();
 
 	/*
 	* On EMU/HS devices ROM code restores a SRDC value
@@ -438,6 +448,7 @@
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
+	omap3_intc_resume_idle();
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
@@ -578,6 +589,8 @@
 	}
 
 	omap_uart_prepare_suspend();
+	omap3_intc_suspend();
+
 	omap_sram_idle();
 
 restore:
@@ -835,6 +848,8 @@
 			CM_AUTOIDLE);
 	}
 
+	omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
 	/*
 	 * Set all plls to autoidle. This is needed until autoidle is
 	 * enabled by clockfw
@@ -875,15 +890,23 @@
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+	/* Enable PM_WKEN to support DSS LPR */
+	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+				OMAP3430_DSS_MOD, PM_WKEN);
+
 	/* Enable wakeups in PER */
 	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+			  OMAP3430_EN_MCBSP4,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
 	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+			  OMAP3430_EN_MCBSP4,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */
@@ -904,24 +927,6 @@
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	/* Don't attach IVA interrupts */
-	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
-	/* Clear any pending 'reset' flags */
-	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
-
-	/* Clear any pending PRCM interrupts */
-	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
 	omap3_iva_idle();
 	omap3_d2d_idle();
 }
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 3ea8177..cf466ea 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -44,7 +44,6 @@
 	u32 iva2_cm_clksel2;
 	u32 cm_sysconfig;
 	u32 sgx_cm_clksel;
-	u32 wkup_cm_clksel;
 	u32 dss_cm_clksel;
 	u32 cam_cm_clksel;
 	u32 per_cm_clksel;
@@ -53,7 +52,6 @@
 	u32 pll_cm_autoidle2;
 	u32 pll_cm_clksel4;
 	u32 pll_cm_clksel5;
-	u32 pll_cm_clken;
 	u32 pll_cm_clken2;
 	u32 cm_polctrl;
 	u32 iva2_cm_fclken;
@@ -77,7 +75,6 @@
 	u32 usbhost_cm_iclken;
 	u32 iva2_cm_autiidle2;
 	u32 mpu_cm_autoidle2;
-	u32 pll_cm_autoidle;
 	u32 iva2_cm_clkstctrl;
 	u32 mpu_cm_clkstctrl;
 	u32 core_cm_clkstctrl;
@@ -274,7 +271,6 @@
 	prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
 	prcm_context.sgx_cm_clksel =
 			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
-	prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 	prcm_context.dss_cm_clksel =
 			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
 	prcm_context.cam_cm_clksel =
@@ -291,8 +287,6 @@
 			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
 	prcm_context.pll_cm_clksel5 =
 			 cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
-	prcm_context.pll_cm_clken =
-			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
 	prcm_context.pll_cm_clken2 =
 			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
 	prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
@@ -338,8 +332,6 @@
 			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
 	prcm_context.mpu_cm_autoidle2 =
 			 cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
-	prcm_context.pll_cm_autoidle =
-			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
 	prcm_context.iva2_cm_clkstctrl =
 			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
 	prcm_context.mpu_cm_clkstctrl =
@@ -431,7 +423,6 @@
 	__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
 	cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
 					 CM_CLKSEL);
-	cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
 	cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
 					 CM_CLKSEL);
 	cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
@@ -448,7 +439,6 @@
 					OMAP3430ES2_CM_CLKSEL4);
 	cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
 					 OMAP3430ES2_CM_CLKSEL5);
-	cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
 	cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
 					OMAP3430ES2_CM_CLKEN2);
 	__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
@@ -487,7 +477,6 @@
 	cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
 					CM_AUTOIDLE2);
 	cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
-	cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
 	cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
 					CM_CLKSTCTRL);
 	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ea050ce..40f0062 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -24,6 +24,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 #define OMAP44XX_PRM_REGADDR(module, reg)				\
 		OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_CHIRONSS_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
 
 #include "prm44xx.h"
 
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 89be97f..adb2558 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -386,26 +386,26 @@
 
 
 /* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM				OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+#define OMAP4430_REVISION_PRCM				OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
 
 /* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
 #endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8c964be..e10a02d 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -36,7 +36,13 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked. 
+ */
+#define DEFAULT_TIMEOUT 0
 
 struct omap_uart_state {
 	int num;
@@ -422,7 +428,8 @@
 	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
-	mod_timer(&uart->timer, jiffies + uart->timeout);
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 15268f8..c3626ea 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -245,7 +245,8 @@
 	mov	r1, #0		@ set task id for ROM code in r1
 	mov	r2, #4		@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, write_aux_control_params	@ r3 points to parameters
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4, #0xBC]	@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
@@ -253,14 +254,14 @@
 	b	logic_l1_restore
 l2_inv_api_params:
 	.word   0x1, 0x00
-write_aux_control_params:
-	.word   0x1, 0x72
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1                         @ set up to invalide L2
 smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
 	/* Write to Aux control register to set some bits */
-	mov	r0, #0x72
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldr	r0, [r3,#4]
 	mov	r12, #0x3
 	.word 0xE1600070	@ Call SMI monitor (smieq)
 logic_l1_restore:
@@ -271,6 +272,7 @@
 
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
+	adds	r3, r3, #8
 	ldmia	r3!, {r4-r6}
 	mov	sp, r4
 	msr	spsr_cxsf, r5
@@ -387,6 +389,9 @@
 save_context_wfi:
 	/*b	save_context_wfi*/	@ enable to debug save code
 	mov	r8, r0 /* Store SDRAM address in r8 */
+	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
+	mov	r4, #0x1		@ Number of parameters for restore call
+	stmia	r8!, {r4-r5}
         /* Check what that target sleep state is:stored in r1*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost */
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b31ca4c..8f159db 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
@@ -32,6 +33,7 @@
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
+#define DNS323_GPIO_SYSTEM_UP		3
 #define DNS323_GPIO_LED_POWER		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
@@ -239,7 +241,7 @@
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER,
-		.active_low = 1,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -334,7 +336,7 @@
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-	{  3, MPP_UNUSED },
+	{  3, MPP_GPIO },		/* system up flag */
 	{  4, MPP_GPIO },		/* power button LED */
 	{  5, MPP_GPIO },		/* power button LED */
 	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
@@ -372,13 +374,23 @@
 	},
 };
 
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
 {
 	pr_info("%s: triggering power-off...\n", __func__);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+	mdelay(100);
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
@@ -424,11 +436,20 @@
 	if (dns323_dev_id() == MV88F5182_DEV_ID)
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* register dns323 specific power-off method */
+	/* The 5182 has flag to indicate the system is up. Without this flag
+	 * set, power LED will flash and cannot be controlled via leds-gpio.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+	/* Register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 		pr_err("DNS323: failed to setup power-off GPIO\n");
-	pm_power_off = dns323_power_off;
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		pm_power_off = dns323b_power_off;
+	else
+		pm_power_off = dns323a_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 1b4ad9d..cb0feca 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -24,6 +27,80 @@
 #include "common.h"
 #include "mpp.h"
 
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+	{
+		.name		= "wrt350nv2:green:power",
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:security",
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:orange:power",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:usb",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:wireless",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+	.leds		= wrt350n_v2_led_pins,
+	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wrt350n_v2_led_data,
+	},
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 3,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_WLAN,
+		.gpio		= 2,
+		.desc		= "WPS Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+	.buttons	= wrt350n_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_button_data,
+	},
+};
+
+/*
+ * General setup
+ */
 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
 	{  0, MPP_GPIO },		/* Power LED green (0=on) */
 	{  1, MPP_GPIO },		/* Security LED (0=on) */
@@ -140,6 +217,8 @@
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
 				   WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
+	platform_device_register(&wrt350n_v2_leds);
+	platform_device_register(&wrt350n_v2_button_device);
 }
 
 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 74446cf..da3156d86 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -457,6 +457,7 @@
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index b13dc02..9c78785 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -169,7 +169,6 @@
 #define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
 #define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
 #define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-#define GPIO89_nACRESET		MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 
 /* USB */
 #define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
@@ -186,6 +185,9 @@
 #define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
 #define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
 #define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#endif
+
+/* AC97 */
+#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif	/* CONFIG_CPU_PXA26x */
 
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6112af4..1beb40f 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -164,8 +164,11 @@
 		saved_icmr[i] = _ICMR(irq);
 		_ICMR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		saved_ipr[i] = IPR(i);
+
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			saved_ipr[i] = IPR(i);
+	}
 
 	return 0;
 }
@@ -174,12 +177,15 @@
 {
 	int i, irq = PXA_IRQ(0);
 
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			IPR(i) = saved_ipr[i];
+	}
+
 	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
 		_ICMR(irq) = saved_icmr[i];
 		_ICLR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		IPR(i) = saved_ipr[i];
 
 	ICCR = 1;
 	return 0;
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a21a4b3..d94857e 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -334,8 +334,8 @@
 	 * in the system FPGA
 	 */
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
+	__raw_writel(0x00F0, reset_ctrl);
+	__raw_writel(0x00F4, reset_ctrl);
 }
 
 static void __init realview_pbx_init(void)
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 547d4fc..2068e90 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -288,7 +288,7 @@
 
 /* DM9000AEP 10/100 ethernet controller */
 
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
 	[0] = {
 		.start = MACH_MINI2440_DM9K_BASE,
 		.end   = MACH_MINI2440_DM9K_BASE + 3,
@@ -310,11 +310,11 @@
  * The DM9000 has no eeprom, and it's MAC address is set by
  * the bootloader before starting the kernel.
  */
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
 	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
 };
 
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
 	.name		= "dm9000",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
@@ -341,7 +341,7 @@
  *	|  |  +----+  +----+
  *	  .....
  */
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
 	{
 		.gpio		= S3C2410_GPG(0),		/* K1 */
 		.code		= KEY_F1,
@@ -384,12 +384,12 @@
 #endif
 };
 
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
 	.buttons	= mini2440_buttons,
 	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
 };
 
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.dev		= {
@@ -399,41 +399,41 @@
 
 /* LEDS */
 
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
 	.name		= "led1",
 	.gpio		= S3C2410_GPB(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "heartbeat",
 };
 
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
 	.name		= "led2",
 	.gpio		= S3C2410_GPB(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "nand-disk",
 };
 
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
 	.name		= "led3",
 	.gpio		= S3C2410_GPB(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "mmc0",
 };
 
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
 	.name		= "led4",
 	.gpio		= S3C2410_GPB(8),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "",
 };
 
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
 	.name		= "backlight",
 	.gpio		= S3C2410_GPG(4),
 	.def_trigger	= "backlight",
 };
 
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
 	.name		= "s3c24xx_led",
 	.id		= 1,
 	.dev		= {
@@ -441,7 +441,7 @@
 	},
 };
 
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
 	.name		= "s3c24xx_led",
 	.id		= 2,
 	.dev		= {
@@ -449,7 +449,7 @@
 	},
 };
 
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
 	.name		= "s3c24xx_led",
 	.id		= 3,
 	.dev		= {
@@ -457,7 +457,7 @@
 	},
 };
 
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
 	.name		= "s3c24xx_led",
 	.id		= 4,
 	.dev		= {
@@ -465,7 +465,7 @@
 	},
 };
 
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
 	.name		= "s3c24xx_led",
 	.id		= 5,
 	.dev		= {
@@ -475,14 +475,14 @@
 
 /* AUDIO */
 
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
 	.l3_clk = S3C2410_GPB(4),
 	.l3_mode = S3C2410_GPB(2),
 	.l3_data = S3C2410_GPB(3),
 	.model = UDA134X_UDA1341
 };
 
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
 	.name		= "s3c24xx_uda134x",
 	.id		= 0,
 	.dev		= {
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index cdd4b53..7619456 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -82,7 +82,7 @@
 	return ret;
 }
 
-static int hmt_bl_notify(int brightness)
+static int hmt_bl_notify(struct device *dev, int brightness)
 {
 	/*
 	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 480d297..8969fe7 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -211,6 +211,7 @@
 	.supply_name = "B_PWR_5V",
 	.microvolts = 5000000,
 	.init_data = &smdk6410_b_pwr_5v_data,
+	.gpio = -EINVAL,
 };
 
 static struct platform_device smdk6410_b_pwr_5v = {
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index b270d62..62820ed 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -11,6 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/moduleparam.h>
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -77,6 +78,8 @@
 static unsigned long ai_multi;
 static int ai_usermode;
 
+core_param(alignment, ai_usermode, int, 0600);
+
 #define UM_WARN		(1 << 0)
 #define UM_FIXUP	(1 << 1)
 #define UM_SIGNAL	(1 << 2)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 1708da8..761ffed 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1067,4 +1067,6 @@
 		pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
 		flush_pmd_entry(pmd);
 	}
+
+	local_flush_tlb_all();
 }
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 3f9cd3d..795dc61 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -41,7 +41,7 @@
 ENTRY(cpu_arm7_data_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r0]			@ read arm instruction
+	ldr	r8, [r2]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 0 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 395cc90..7a5337e 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -59,8 +59,6 @@
  *	to what would be the reset vector.
  *
  *	- loc   - location to jump to for soft reset
- *
- *	It is assumed that:
  */
 	.align	5
 ENTRY(cpu_v6_reset)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3a28521..7aaf88a 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -45,7 +45,14 @@
 ENDPROC(cpu_v7_proc_init)
 
 ENTRY(cpu_v7_proc_fin)
-	mov	pc, lr
+	stmfd	sp!, {lr}
+	cpsid	if				@ disable interrupts
+	bl	v7_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
 ENDPROC(cpu_v7_proc_fin)
 
 /*
@@ -56,8 +63,6 @@
  *	to what would be the reset vector.
  *
  *	- loc   - location to jump to for soft reset
- *
- *	It is assumed that:
  */
 	.align	5
 ENTRY(cpu_v7_reset)
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 6f21096..b06954a 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -23,6 +23,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <mach/audmux.h>
 #include <mach/hardware.h>
 
@@ -32,6 +33,140 @@
 #define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
 #define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
 
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+	switch (port) {
+	case MX31_AUDMUX_PORT1_SSI0:
+		return "imx-ssi.0";
+	case MX31_AUDMUX_PORT2_SSI1:
+		return "imx-ssi.1";
+	case MX31_AUDMUX_PORT3_SSI_PINS_3:
+		return "SSI3";
+	case MX31_AUDMUX_PORT4_SSI_PINS_4:
+		return "SSI4";
+	case MX31_AUDMUX_PORT5_SSI_PINS_5:
+		return "SSI5";
+	case MX31_AUDMUX_PORT6_SSI_PINS_6:
+		return "SSI6";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	ssize_t ret;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	int port = (int)file->private_data;
+	u32 pdcr, ptcr;
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+		       pdcr, ptcr);
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS output from %s, ",
+				audmux_port_string((ptcr >> 27) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS input, ");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk output from %s",
+				audmux_port_string((ptcr >> 22) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk input");
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"Port is symmetric");
+	} else {
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS output from %s, ",
+					audmux_port_string((ptcr >> 17) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS input, ");
+
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk output from %s",
+					audmux_port_string((ptcr >> 12) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk input");
+	}
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret,
+			"\nData received from %s\n",
+			audmux_port_string((pdcr >> 13) & 0x7));
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+	.open = audmux_open_file,
+	.read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+	int i;
+	char buf[20];
+
+	audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+	if (!audmux_debugfs_root) {
+		pr_warning("Failed to create AUDMUX debugfs root\n");
+		return;
+	}
+
+	for (i = 1; i < 8; i++) {
+		snprintf(buf, sizeof(buf), "ssi%d", i);
+		if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+					 (void *)i, &audmux_debugfs_fops))
+			pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+				   i);
+	}
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
 int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		unsigned int pdcr)
 {
@@ -68,6 +203,8 @@
 	if (cpu_is_mx31() || cpu_is_mx35())
 		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
 
+	audmux_debugfs_init();
+
 	return 0;
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 0184b63..2b2da03 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -25,7 +25,7 @@
 
 #ifndef __ASSEMBLY__
 
-enum mx31lilly_boards {
+enum mx31lite_boards {
 	MX31LITE_NOBOARD	= 0,
 	MX31LITE_DB		= 1,
 };
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b..4bf1068 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,7 +32,7 @@
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 00b0ac1..c88d407 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -671,7 +671,7 @@
 #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
 #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d59..0cb3476 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -37,7 +37,12 @@
  * within sensible limits.
  */
 #define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS  80
+#else
 #define MXC_BOARD_IRQS	16
+#endif
 
 #define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
 
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 4d5d395..d49384c 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -60,7 +60,9 @@
 	UART(TXR) = ch;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 #define MX1_UART1_BASE_ADDR	0x00206000
 #define MX25_UART1_BASE_ADDR	0x43f90000
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index d9f8c84..4becbdd 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -391,7 +391,7 @@
 static int clk_debugfs_register_one(struct clk *c)
 {
 	int err;
-	struct dentry *d, *child;
+	struct dentry *d, *child, *child_tmp;
 	struct clk *pa = c->parent;
 	char s[255];
 	char *p = s;
@@ -423,7 +423,7 @@
 
 err_out:
 	d = c->dent;
-	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
 		debugfs_remove(child);
 	debugfs_remove(c->dent);
 	return err;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bf1eaf3..dddc027 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -172,6 +172,32 @@
 				  clocksource_32k.mult, clocksource_32k.shift);
 }
 
+/**
+ * read_persistent_clock -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+	unsigned long long nsecs;
+	cycles_t delta;
+	struct timespec *tsp = &persistent_ts;
+
+	last_cycles = cycles;
+	cycles = clocksource_32k.read(&clocksource_32k);
+	delta = cycles - last_cycles;
+
+	nsecs = clocksource_cyc2ns(delta,
+				   clocksource_32k.mult, clocksource_32k.shift);
+
+	timespec_add_ns(tsp, nsecs);
+	*ts = *tsp;
+}
+
 static int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 09d82b3..728c642 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1183,7 +1183,7 @@
 	}
 
 	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
-	    (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
+	    (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
 		printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
 		       "before unlinking\n");
 		dump_stack();
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 64f407e..08ccf89 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -551,6 +551,19 @@
 	if (l & OMAP_TIMER_CTRL_ST) {
 		l &= ~0x1;
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
+		/* Readback to make sure write has completed */
+		omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+		 /*
+		  * Wait for functional clock period x 3.5 to make sure that
+		  * timer is stopped
+		  */
+		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+		/* Ack possibly pending interrupt */
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+				OMAP_TIMER_INT_OVERFLOW);
+#endif
 	}
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d17620c..d2422c7 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -750,6 +750,7 @@
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 /*
  * This only applies to chips that can't do both rising and falling edge
  * detection at once.  For all other chips, this function is a noop.
@@ -760,11 +761,9 @@
 	u32 l = 0;
 
 	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		break;
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
@@ -787,6 +786,7 @@
 
 	__raw_writel(l, reg);
 }
+#endif
 
 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 {
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 9a028bd..a162f58 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -434,6 +434,7 @@
 #define OMAP3430_REV_ES2_1	0x34302034
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
+#define OMAP3430_REV_ES3_1_2	0x34305034
 
 #define OMAP3630_REV_ES1_0	0x36300034
 
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 97d6c50c3..c0ab7c8 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -499,6 +499,9 @@
 extern int omap_irq_pending(void);
 void omap_intc_save_context(void);
 void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 007935a..3393325 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -227,6 +227,7 @@
 #define SYSC_HAS_SIDLEMODE	(1 << 5)
 #define SYSC_HAS_MIDLEMODE	(1 << 6)
 #define SYSS_MISSING		(1 << 7)
+#define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 1e5648d..2ed7201 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -89,16 +89,6 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE		0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE		0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE		0x48320000
-#else
-# error Unknown OMAP device
-#endif
 
 /* Private functions */
 
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index d41d41d..54c84a4 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -133,6 +133,12 @@
 	}
 
 	/*
+	 * Round up 'size' to the nearest power of two.
+	 */
+	if ((size & (size - 1)) != 0)
+		size = 1 << fls(size);
+
+	/*
 	 * Setup BAR[1] to all DRAM banks.
 	 */
 	writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 84808cc..a52fb6c 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -58,8 +58,8 @@
 			return -ENOMEM;
 	}
 	
-	size = sizeof(int) * set->nr_chips;
-	if (size) {
+	if (set->nr_map && set->nr_chips) {
+		size = sizeof(int) * set->nr_chips;
 		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
 		set->nr_map = ptr;
 
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c3a74ce..31c2f4c 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Wed Dec 16 20:06:34 2009
+# Last update: Sat Feb 20 14:16:15 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2257,7 +2257,7 @@
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
+vexpress		MACH_VEXPRESS		VEXPRESS		2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2536,6 +2536,7 @@
 c3ax03			MACH_C3AX03		C3AX03			2549
 mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
 esyx			MACH_ESYX		ESYX			2551
+dove_db2		MACH_DOVE_DB2		DOVE_DB2		2552
 bulldog			MACH_BULLDOG		BULLDOG			2553
 derell_me2000		MACH_DERELL_ME2000	DERELL_ME2000		2554
 bcmring_base		MACH_BCMRING_BASE	BCMRING_BASE		2555
@@ -2555,6 +2556,7 @@
 cezanne			MACH_CEZANNE		CEZANNE			2569
 lucca			MACH_LUCCA		LUCCA			2570
 supersmart		MACH_SUPERSMART		SUPERSMART		2571
+arm11_board		MACH_CS_MISANO		CS_MISANO		2572
 magnolia2		MACH_MAGNOLIA2		MAGNOLIA2		2573
 emxx			MACH_EMXX		EMXX			2574
 outlaw			MACH_OUTLAW		OUTLAW			2575
@@ -2578,3 +2580,101 @@
 phrazer_bulldog		MACH_PHRAZER_BULLDOG	PHRAZER_BULLDOG		2593
 omap3_bulldog		MACH_OMAP3_BULLDOG	OMAP3_BULLDOG		2594
 pca101			MACH_PCA101		PCA101			2595
+buzzc			MACH_BUZZC		BUZZC			2596
+sasie2			MACH_SASIE2		SASIE2			2597
+davinci_cio		MACH_DAVINCI_CIO	DAVINCI_CIO		2598
+smartmeter_dl		MACH_SMARTMETER_DL	SMARTMETER_DL		2599
+wzl6410			MACH_WZL6410		WZL6410			2600
+wzl6410m		MACH_WZL6410M		WZL6410M		2601
+wzl6410f		MACH_WZL6410F		WZL6410F		2602
+wzl6410i		MACH_WZL6410I		WZL6410I		2603
+spacecom1		MACH_SPACECOM1		SPACECOM1		2604
+pingu920		MACH_PINGU920		PINGU920		2605
+bravoc			MACH_BRAVOC		BRAVOC			2606
+cybo2440		MACH_CYBO2440		CYBO2440		2607
+vdssw			MACH_VDSSW		VDSSW			2608
+romulus			MACH_ROMULUS		ROMULUS			2609
+omap_magic		MACH_OMAP_MAGIC		OMAP_MAGIC		2610
+eltd100			MACH_ELTD100		ELTD100			2611
+capc7117		MACH_CAPC7117		CAPC7117		2612
+swan			MACH_SWAN		SWAN			2613
+veu			MACH_VEU		VEU			2614
+rm2			MACH_RM2		RM2			2615
+tt2100			MACH_TT2100		TT2100			2616
+venice			MACH_VENICE		VENICE			2617
+pc7323			MACH_PC7323		PC7323			2618
+masp			MACH_MASP		MASP			2619
+fujitsu_tvstbsoc0	MACH_FUJITSU_TVSTBSOC	FUJITSU_TVSTBSOC	2620
+fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
+lexikon			MACH_LEXIKON		LEXIKON			2622
+mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
+icontrol		MACH_ICONTROL		ICONTROL		2624
+sheevad			MACH_SHEEVAD		SHEEVAD			2625
+qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
+qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
+bee			MACH_BEE		BEE			2628
+mx23evk			MACH_MX23EVK		MX23EVK			2629
+ap4evb			MACH_AP4EVB		AP4EVB			2630
+stockholm		MACH_STOCKHOLM		STOCKHOLM		2631
+lpc_h3131		MACH_LPC_H3131		LPC_H3131		2632
+stingray		MACH_STINGRAY		STINGRAY		2633
+kraken			MACH_KRAKEN		KRAKEN			2634
+gw2388			MACH_GW2388		GW2388			2635
+jadecpu			MACH_JADECPU		JADECPU			2636
+carlisle		MACH_CARLISLE		CARLISLE		2637
+lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
+terrier			MACH_TERRIER		TERRIER			2640
+turbot			MACH_TURBOT		TURBOT			2641
+sanddab			MACH_SANDDAB		SANDDAB			2642
+mx35_cicada		MACH_MX35_CICADA	MX35_CICADA		2643
+ghi2703d		MACH_GHI2703D		GHI2703D		2644
+lux_sfx9		MACH_LUX_SFX9		LUX_SFX9		2645
+lux_sf9g		MACH_LUX_SF9G		LUX_SF9G		2646
+lux_edk9		MACH_LUX_EDK9		LUX_EDK9		2647
+hw90240			MACH_HW90240		HW90240			2648
+dm365_leopard		MACH_DM365_LEOPARD	DM365_LEOPARD		2649
+mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
+scat110			MACH_SCAT110		SCAT110			2651
+acer_a1			MACH_ACER_A1		ACER_A1			2652
+cmcontrol		MACH_CMCONTROL		CMCONTROL		2653
+pelco_lamar		MACH_PELCO_LAMAR	PELCO_LAMAR		2654
+rfp43			MACH_RFP43		RFP43			2655
+sk86r0301		MACH_SK86R0301		SK86R0301		2656
+ctpxa			MACH_CTPXA		CTPXA			2657
+epb_arm9_a		MACH_EPB_ARM9_A		EPB_ARM9_A		2658
+guruplug		MACH_GURUPLUG		GURUPLUG		2659
+spear310		MACH_SPEAR310		SPEAR310		2660
+spear320		MACH_SPEAR320		SPEAR320		2661
+robotx			MACH_ROBOTX		ROBOTX			2662
+lsxhl			MACH_LSXHL		LSXHL			2663
+smartlite		MACH_SMARTLITE		SMARTLITE		2664
+cws2			MACH_CWS2		CWS2			2665
+m619			MACH_M619		M619			2666
+smartview		MACH_SMARTVIEW		SMARTVIEW		2667
+lsa_salsa		MACH_LSA_SALSA		LSA_SALSA		2668
+kizbox			MACH_KIZBOX		KIZBOX			2669
+htccharmer		MACH_HTCCHARMER		HTCCHARMER		2670
+guf_neso_lt		MACH_GUF_NESO_LT	GUF_NESO_LT		2671
+pm9g45			MACH_PM9G45		PM9G45			2672
+htcpanther		MACH_HTCPANTHER		HTCPANTHER		2673
+htcpanther_cdma		MACH_HTCPANTHER_CDMA	HTCPANTHER_CDMA		2674
+reb01			MACH_REB01		REB01			2675
+aquila			MACH_AQUILA		AQUILA			2676
+spark_sls_hw2		MACH_SPARK_SLS_HW2	SPARK_SLS_HW2		2677
+sheeva_esata		MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
+surf7x30		MACH_SURF7X30		SURF7X30		2679
+micro2440		MACH_MICRO2440		MICRO2440		2680
+am2440			MACH_AM2440		AM2440			2681
+tq2440			MACH_TQ2440		TQ2440			2682
+lpc2478oem		MACH_LPC2478OEM		LPC2478OEM		2683
+ak880x			MACH_AK880X		AK880X			2684
+cobra3530		MACH_COBRA3530		COBRA3530		2685
+pmppb			MACH_PMPPB		PMPPB			2686
+u6715			MACH_U6715		U6715			2687
+axar1500_sender		MACH_AXAR1500_SENDER	AXAR1500_SENDER		2688
+g30_dvb			MACH_G30_DVB		G30_DVB			2689
+vc088x			MACH_VC088X		VC088X			2690
+mioa702			MACH_MIOA702		MIOA702			2691
+hpmin			MACH_HPMIN		HPMIN			2692
+ak880xak		MACH_AK880XAK		AK880XAK		2693
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f60a540..a63c4be 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -197,10 +197,13 @@
 	}
 
 	/*
-	 * Update the FPSCR with the additional exception flags.
+	 * If any of the status flags are set, update the FPSCR.
 	 * Comparison instructions always return at least one of
 	 * these flags set.
 	 */
+	if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+		fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
 	fpscr |= exceptions;
 
 	fmxr(FPSCR, fpscr);
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 1aa1ea5..b13d187 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1325,7 +1325,7 @@
 at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct platform_device		*pdev;
-	struct mci_dma_slave		*slave;
+	struct mci_dma_data	        *slave;
 	u32				pioa_mask;
 	u32				piob_mask;
 
@@ -1344,7 +1344,9 @@
 				ARRAY_SIZE(atmel_mci0_resource)))
 		goto fail;
 
-	slave = kzalloc(sizeof(struct mci_dma_slave), GFP_KERNEL);
+	slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
+	if (!slave)
+		goto fail;
 
 	slave->sdata.dma_dev = &dw_dmac0_device.dev;
 	slave->sdata.reg_width = DW_DMA_SLAVE_WIDTH_32BIT;
@@ -1357,7 +1359,7 @@
 
 	if (platform_device_add_data(pdev, data,
 				sizeof(struct mci_platform_data)))
-		goto fail;
+		goto fail_free;
 
 	/* CLK line is common to both slots */
 	pioa_mask = 1 << 10;
@@ -1381,7 +1383,7 @@
 		/* Slot is unused */
 		break;
 	default:
-		goto fail;
+		goto fail_free;
 	}
 
 	select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
@@ -1408,7 +1410,7 @@
 		break;
 	default:
 		if (!data->slot[0].bus_width)
-			goto fail;
+			goto fail_free;
 
 		data->slot[1].bus_width = 0;
 		break;
@@ -1419,9 +1421,10 @@
 	platform_device_add(pdev);
 	return pdev;
 
+fail_free:
+	kfree(slave);
 fail:
 	data->dma_slave = NULL;
-	kfree(slave);
 	platform_device_put(pdev);
 	return NULL;
 }
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 7ae5889..e97b255 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -94,6 +94,7 @@
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
 #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#define acpi_ht 0	/* no HT-only mode on IA64 */
 #endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h
index e14108b..4c41656 100644
--- a/arch/ia64/include/asm/elf.h
+++ b/arch/ia64/include/asm/elf.h
@@ -201,7 +201,9 @@
    relevant until we have real hardware to play with... */
 #define ELF_PLATFORM	NULL
 
-#define SET_PERSONALITY(ex)	set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex)	\
+	set_personality((current->personality & ~PER_MASK) | PER_LINUX)
+
 #define elf_read_implies_exec(ex, executable_stack)					\
 	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
 
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index ece1bf9..e456f06 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -71,7 +71,7 @@
 DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
 EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
 
-DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
+DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
 EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index d8720ee..aebea19 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -146,7 +146,6 @@
 	.read	= pit_read_clk,
 	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 /***************************************************************************/
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index fd53e50..cd5837e 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -90,7 +90,7 @@
 
 menu "Processor type and features"
 
-source kernel/time/Kconfig
+source "kernel/time/Kconfig"
 
 source "kernel/Kconfig.preempt"
 
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index bb7c374..6fced1f 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 10:28:50 2009
+# Linux kernel version: 2.6.33-rc6
+# Wed Feb  3 10:02:59 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -19,8 +19,12 @@
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_CSUM=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_PCI is not set
 CONFIG_NO_DMA=y
+CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -44,6 +48,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -64,10 +69,12 @@
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_INITRAMFS_COMPRESSION_NONE is not set
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y
 # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
 # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -90,21 +97,20 @@
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
 # GCOV-based kernel profiling
 #
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
@@ -123,14 +129,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -139,11 +172,6 @@
 CONFIG_PLATFORM_GENERIC=y
 CONFIG_OPT_LIB_FUNCTION=y
 CONFIG_OPT_LIB_ASM=y
-CONFIG_ALLOW_EDIT_AUTO=y
-
-#
-# Automatic platform settings from Kconfig.auto
-#
 
 #
 # Definitions for MICROBLAZE0
@@ -203,12 +231,11 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -289,7 +316,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -313,6 +346,10 @@
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -349,7 +386,6 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -359,12 +395,12 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_XILINX_EMACLITE=y
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -408,6 +444,7 @@
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -433,7 +470,6 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -526,8 +562,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -638,11 +672,13 @@
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -662,6 +698,9 @@
 # CONFIG_DEBUG_SLAB_LEAK is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -680,10 +719,29 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KMEMCHECK is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
 CONFIG_DEBUG_BOOTMEM=y
@@ -694,7 +752,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index adb839b..ce2da53 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Thu Sep 24 10:29:43 2009
+# Linux kernel version: 2.6.33-rc6
+# Wed Feb  3 10:03:21 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -19,8 +19,12 @@
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_CSUM=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_PCI is not set
 CONFIG_NO_DMA=y
+CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -46,6 +50,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -81,16 +86,16 @@
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
 
 #
 # GCOV-based kernel profiling
@@ -116,14 +121,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,7 +164,10 @@
 CONFIG_PLATFORM_GENERIC=y
 # CONFIG_SELFMOD is not set
 # CONFIG_OPT_LIB_FUNCTION is not set
-# CONFIG_ALLOW_EDIT_AUTO is not set
+
+#
+# Definitions for MICROBLAZE0
+#
 CONFIG_KERNEL_BASE_ADDR=0x90000000
 CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
@@ -190,7 +225,6 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -274,9 +308,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -301,9 +332,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -387,6 +418,10 @@
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -423,7 +458,6 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -433,12 +467,12 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -482,6 +516,7 @@
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -508,7 +543,6 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -616,7 +650,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -672,11 +705,13 @@
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -695,12 +730,16 @@
 CONFIG_DEBUG_OBJECTS_SELFTEST=y
 CONFIG_DEBUG_OBJECTS_FREE=y
 CONFIG_DEBUG_OBJECTS_TIMERS=y
+# CONFIG_DEBUG_OBJECTS_WORK is not set
 CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -720,8 +759,28 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
@@ -734,7 +793,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index fc9997b..267c7c7 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -217,7 +217,7 @@
  * Little endian
  */
 
-#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
 #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
 
 #define in_le32(a) __le32_to_cpu(__raw_readl(a))
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index a917dc5..d74dbfb 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -54,6 +54,7 @@
 	int pt_mode;
 };
 
+#ifdef __KERNEL__
 #define kernel_mode(regs)		((regs)->pt_mode)
 #define user_mode(regs)			(!kernel_mode(regs))
 
@@ -62,6 +63,19 @@
 
 void show_regs(struct pt_regs *);
 
+#else /* __KERNEL__ */
+
+/* pt_regs offsets used by gdbserver etc in ptrace syscalls */
+#define PT_GPR(n)       ((n) * sizeof(microblaze_reg_t))
+#define PT_PC           (32 * sizeof(microblaze_reg_t))
+#define PT_MSR          (33 * sizeof(microblaze_reg_t))
+#define PT_EAR          (34 * sizeof(microblaze_reg_t))
+#define PT_ESR          (35 * sizeof(microblaze_reg_t))
+#define PT_FSR          (36 * sizeof(microblaze_reg_t))
+#define PT_KERNEL_MODE  (37 * sizeof(microblaze_reg_t))
+
+#endif /* __KERNEL */
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index cb05a07..2b67e92 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -377,13 +377,14 @@
 #define __NR_shutdown		359 /* new */
 #define __NR_sendmsg		360 /* new */
 #define __NR_recvmsg		361 /* new */
-#define __NR_accept04		362 /* new */
+#define __NR_accept4		362 /* new */
 #define __NR_preadv		363 /* new */
 #define __NR_pwritev		364 /* new */
 #define __NR_rt_tgsigqueueinfo	365 /* new */
 #define __NR_perf_event_open	366 /* new */
+#define __NR_recvmmsg		367 /* new */
 
-#define __NR_syscalls		367
+#define __NR_syscalls		368
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index d9d6383..2a56bcc 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -172,16 +172,15 @@
 /* It is used only first parameter for OP - for wic, wdc */
 #define CACHE_RANGE_LOOP_1(start, end, line_length, op)			\
 do {									\
-	int step = -line_length;					\
-	int count = end - start;					\
-	BUG_ON(count <= 0);						\
+	int volatile temp;						\
+	BUG_ON(end - start <= 0);					\
 									\
-	__asm__ __volatile__ (" 1:	addk	%0, %0, %1;		\
-					" #op " %0, r0;			\
-					bgtid   %1, 1b;			\
-					addk    %1, %1, %2;		\
-					" : : "r" (start), "r" (count),	\
-					"r" (step) : "memory");		\
+	__asm__ __volatile__ (" 1:	" #op " %1, r0;			\
+					cmpu	%0, %1, %2;		\
+					bgtid	%0, 1b;			\
+					addk	%1, %1, %3;		\
+				" : : "r" (temp), "r" (start), "r" (end),\
+					"r" (line_length) : "memory");	\
 } while (0);
 
 static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
@@ -313,16 +312,6 @@
 	pr_debug("%s\n", __func__);
 	CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
 					wdc.clear)
-
-#if 0
-	unsigned int i;
-
-	pr_debug("%s\n", __func__);
-
-	/* Just loop through cache size and invalidate it */
-	for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length)
-			__invalidate_dcache(0, i);
-#endif
 }
 
 static void __invalidate_dcache_range_wb(unsigned long start,
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 95b0855..391d619 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -122,7 +122,7 @@
 
 ret_from_intr:
 	lwi	r11, r1, PT_MODE
-	bneid	r11, 3f
+	bneid	r11, no_intr_resched
 
 	lwi	r6, r31, TS_THREAD_INFO	/* get thread info */
 	lwi	r19, r6, TI_FLAGS	/* get flags in thread info */
@@ -133,16 +133,18 @@
 	bralid	r15, schedule
 	nop
 1:	andi	r11, r19, _TIF_SIGPENDING
-	beqid	r11, no_intr_reshed
+	beqid	r11, no_intr_resched
 	addk	r5, r1, r0
 	addk	r7, r0, r0
 	bralid	r15, do_signal
 	addk	r6, r0, r0
 
-no_intr_reshed:
+no_intr_resched:
+	/* Disable interrupts, we are now committed to the state restore */
+	disable_irq
+
 	/* save mode indicator */
 	lwi	r11, r1, PT_MODE
-3:
 	swi	r11, r0, PER_CPU(KM)
 
 	/* save r31 */
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index ae0352e..bf7e6c2 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -256,7 +256,7 @@
 		if (ppdev == NULL) {
 			struct pci_controller *host;
 			host = pci_bus_to_host(pdev->bus);
-			ppnode = host ? host->arch_data : NULL;
+			ppnode = host ? host->dn : NULL;
 			/* No node for host bridge ? give up */
 			if (ppnode == NULL)
 				return -EINVAL;
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 5372b24..bb8c4b9 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -54,6 +54,7 @@
 
 	microblaze_cache_init();
 
+	invalidate_dcache();
 	enable_dcache();
 
 	invalidate_icache();
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 4088be7..03376dc 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -366,7 +366,7 @@
 	.long sys_shutdown
 	.long sys_sendmsg		/* 360 */
 	.long sys_recvmsg
-	.long sys_ni_syscall
+	.long sys_accept4
 	.long sys_ni_syscall
 	.long sys_ni_syscall
 	.long sys_rt_tgsigqueueinfo	/* 365 */
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9541171..8b5d174 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1311,6 +1311,7 @@
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_LZO
 
 config SYS_SUPPORTS_ZBOOT_UART16550
 	bool
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 5c68569..f9201ca 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -412,8 +412,11 @@
 		if (desc_base == 0)
 			return 0;
 
+		ctp->cdb_membase = desc_base;
 		desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
-	}
+	} else
+		ctp->cdb_membase = desc_base;
+
 	dp = (au1x_ddma_desc_t *)desc_base;
 
 	/* Keep track of the base descriptor. */
@@ -831,7 +834,7 @@
 
 	au1xxx_dbdma_stop(chanid);
 
-	kfree((void *)ctp->chan_desc_base);
+	kfree((void *)ctp->cdb_membase);
 
 	stp->dev_flags &= ~DEV_FLAGS_INUSE;
 	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 85169c0..f70a10a 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -202,7 +202,7 @@
 		.name = "mem",
 		.flags = IORESOURCE_MEM,
 		.start = 0x03400000,
-		.end = 0x034001fff,
+		.end = 0x03401fff,
 	},
 };
 
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index c51405e..29d3cbf 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -141,6 +141,14 @@
 			break;
 	}
 
+	/* Ignoring the last page when ddr size is 128M. Cached
+	 * accesses to last page is causing the processor to prefetch
+	 * using address above 128M stepping out of the ddr address
+	 * space.
+	 */
+	if (mem == 0x8000000)
+		mem -= 0x1000;
+
 	add_memory_region(0, mem, BOOT_MEM_RAM);
 }
 
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 671d344..9df903d 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -14,8 +14,11 @@
 
 # compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
 VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1)
-VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
-VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE))))
+VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo -n $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
+# VMLINUZ_LOAD_ADDRESS = concat "high32 of VMLINUX_LOAD_ADDRESS" and "(low32 of VMLINUX_LOAD_ADDRESS) + VMLINUX_SIZE"
+HIGH32 := $(shell A=$(VMLINUX_LOAD_ADDRESS); [ $${\#A} -gt 10 ] && expr substr "$(VMLINUX_LOAD_ADDRESS)" 3 $$(($${\#A} - 10)))
+LOW32 := $(shell [ -n "$(HIGH32)" ] && A=11 || A=3; expr substr "$(VMLINUX_LOAD_ADDRESS)" $${A} 8)
+VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" -a -n "$(LOW32)" ] && printf "$(HIGH32)%08x" $$(($(VMLINUX_SIZE) + 0x$(LOW32))))
 
 # set the default size of the mallocing area for decompressing
 BOOT_HEAP_SIZE := 0x400000
@@ -41,9 +44,11 @@
 suffix_$(CONFIG_KERNEL_GZIP)  = gz
 suffix_$(CONFIG_KERNEL_BZIP2) = bz2
 suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+suffix_$(CONFIG_KERNEL_LZO)   = lzo
 tool_$(CONFIG_KERNEL_GZIP)    = gzip
 tool_$(CONFIG_KERNEL_BZIP2)   = bzip2
 tool_$(CONFIG_KERNEL_LZMA)    = lzma
+tool_$(CONFIG_KERNEL_LZO)     = lzo
 $(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin
 	$(call if_changed,$(tool_y))
 
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index e48fd72..55d02b3 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -77,6 +77,10 @@
 #include "../../../../lib/decompress_unlzma.c"
 #endif
 
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
 void decompress_kernel(unsigned long boot_heap_start)
 {
 	int zimage_size;
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index ed84b4c..84b6503 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug  7 13:04:24 2007
+# Linux kernel version: 2.6.33-rc6
+# Wed Feb  3 18:12:31 2010
 #
 CONFIG_MIPS=y
 
@@ -9,20 +9,28 @@
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 CONFIG_SGI_IP27=y
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -33,32 +41,39 @@
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 CONFIG_SGI_SN_M_MODE=y
 # CONFIG_SGI_SN_N_MODE is not set
 # CONFIG_MAPPED_KERNEL is not set
 # CONFIG_REPLICATE_KTEXT is not set
 # CONFIG_REPLICATE_EXHANDLERS is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_ARC=y
 CONFIG_DMA_COHERENT=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_DEFAULT_SGI_PARTITION=y
 CONFIG_MIPS_L1_CACHE_SHIFT=7
 CONFIG_ARC64=y
 CONFIG_BOOT_ELF64=y
@@ -66,7 +81,8 @@
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -79,6 +95,7 @@
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -86,6 +103,7 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_R10000=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -99,6 +117,7 @@
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
@@ -110,6 +129,7 @@
 CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_NUMA=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_NODES_SHIFT=6
@@ -120,16 +140,22 @@
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_64=y
 CONFIG_NR_CPUS=64
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,13 +168,13 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 # CONFIG_MIPS_INSANE_LARGE is not set
 # CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -162,20 +188,41 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_PROC_PID_CPUSET=y
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -184,44 +231,92 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_CGROUP is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_CFQ_GROUP_IOSCHED is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -230,11 +325,10 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -242,8 +336,9 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -255,13 +350,10 @@
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
 CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
 
 #
 # Networking options
@@ -273,6 +365,8 @@
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -292,19 +386,40 @@
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,9 +429,11 @@
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -326,12 +443,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -340,7 +454,7 @@
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+CONFIG_NET_SCH_MULTIQ=y
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -348,6 +462,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -364,41 +479,63 @@
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=y
 # CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_ACT_GACT=m
 CONFIG_GACT_PROB=y
 CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
 # CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 CONFIG_RFKILL=m
+CONFIG_RFKILL_LEDS=y
 # CONFIG_NET_9P is not set
 
 #
@@ -408,9 +545,13 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@@ -423,14 +564,19 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_OSD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -453,10 +599,6 @@
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -471,11 +613,18 @@
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+CONFIG_SCSI_HPSA=m
 # CONFIG_SCSI_3W_9XXX is not set
+CONFIG_SCSI_3W_SAS=m
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -483,11 +632,21 @@
 # CONFIG_SCSI_AIC79XX is not set
 CONFIG_SCSI_AIC94XX=m
 # CONFIG_AIC94XX_DEBUG is not set
+CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+CONFIG_SCSI_DPT_I2O=m
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
 # CONFIG_SCSI_HPTIOP is not set
+CONFIG_LIBFC=m
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -502,16 +661,31 @@
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_PMCRAID=m
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+CONFIG_SCSI_BFA_FC=m
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
@@ -519,36 +693,39 @@
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
 # CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+CONFIG_DM_UEVENT=y
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
 CONFIG_IFB=m
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -562,23 +739,51 @@
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_STE10XP=m
+CONFIG_LSI_ET1011C_PHY=m
 # CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_AX88796=m
+CONFIG_AX88796_93CX6=y
 CONFIG_SGI_IOC3_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=m
 # CONFIG_DM9000 is not set
+CONFIG_ETHOC=m
+CONFIG_SMSC911X=m
+CONFIG_DNET=m
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_KS8842=m
+CONFIG_KS8851_MLL=m
+CONFIG_ATL2=m
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+CONFIG_E1000E=m
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_IGBVF=m
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -588,24 +793,75 @@
 # CONFIG_SKY2 is not set
 CONFIG_VIA_VELOCITY=m
 # CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=m
+CONFIG_CNIC=m
 CONFIG_QLA3XXX=m
 # CONFIG_ATL1 is not set
+CONFIG_ATL1E=m
+CONFIG_ATL1C=m
+CONFIG_JME=m
 CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 CONFIG_CHELSIO_T3=m
+CONFIG_ENIC=m
+CONFIG_IXGBE=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+CONFIG_VXGE=m
+# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
-# CONFIG_MLX4_CORE is not set
+CONFIG_NIU=m
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+# CONFIG_MLX4_DEBUG is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_QLGE=m
+CONFIG_SFC=m
+CONFIG_BE2NET=m
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_WLAN=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_RTL8180=m
+CONFIG_ADM8211=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MWL8K=m
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+CONFIG_ATH5K=m
+# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH9K_HW=m
+CONFIG_ATH9K_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_B43=m
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
 CONFIG_IPW2100=m
 CONFIG_IPW2100_MONITOR=y
 CONFIG_IPW2100_DEBUG=y
@@ -615,38 +871,57 @@
 CONFIG_IPW2200_PROMISCUOUS=y
 CONFIG_IPW2200_QOS=y
 CONFIG_IPW2200_DEBUG=y
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
+CONFIG_IWLWIFI=m
+CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
+# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLAGN=m
+CONFIG_IWL4965=y
+CONFIG_IWL5000=y
+CONFIG_IWL3945=m
+CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_DEBUG is not set
 CONFIG_HERMES=m
+# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
 CONFIG_PLX_HERMES=m
 CONFIG_TMD_HERMES=m
 CONFIG_NORTEL_HERMES=m
 CONFIG_PCI_HERMES=m
-CONFIG_ATMEL=m
-CONFIG_PCI_ATMEL=m
-CONFIG_PRISM54=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_PLX=m
-CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_PCI=m
+CONFIG_P54_LEDS=y
+CONFIG_RT2X00=m
+CONFIG_RT2400PCI=m
+CONFIG_RT2500PCI=m
+CONFIG_RT61PCI=m
+CONFIG_RT2800PCI_PCI=m
+CONFIG_RT2800PCI=m
+CONFIG_RT2800_LIB=m
+CONFIG_RT2X00_LIB_PCI=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+CONFIG_WL1251=m
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -664,13 +939,16 @@
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=m
 CONFIG_SERIO_RAW=m
+CONFIG_SERIO_ALTERA_PS2=m
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_NOZOMI=m
 
 #
 # Serial drivers
@@ -693,95 +971,258 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_RTC is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCA=m
 
 #
-# SPI support
+# I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+CONFIG_I2C_ALI1535=m
+CONFIG_I2C_ALI1563=m
+CONFIG_I2C_ALI15X3=m
+CONFIG_I2C_AMD756=m
+CONFIG_I2C_AMD8111=m
+CONFIG_I2C_I801=m
+CONFIG_I2C_ISCH=m
+CONFIG_I2C_PIIX4=m
+CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_SIS5595=m
+CONFIG_I2C_SIS630=m
+CONFIG_I2C_SIS96X=m
+CONFIG_I2C_VIA=m
+CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_OCORES=m
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT_LIGHT=m
+CONFIG_I2C_TAOS_EVM=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# PPS support
+#
+CONFIG_PPS=m
+# CONFIG_PPS_DEBUG is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=m
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=m
+CONFIG_MFD_WM8350_I2C=m
+CONFIG_MFD_PCF50633=m
+CONFIG_PCF50633_ADC=m
+CONFIG_PCF50633_GPIO=m
+CONFIG_AB3100_CORE=m
+CONFIG_AB3100_OTP=m
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_WM8350=m
+CONFIG_LEDS_BD2802=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# DMA Engine support
+# RTC interfaces
 #
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# DMA Clients
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
 #
 
 #
-# DMA Devices
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=y
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_WM8350 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
+CONFIG_RTC_DRV_AB3100=m
 
 #
-# Userspace I/O
+# on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
 # CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+CONFIG_UIO_SMX=m
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
+CONFIG_UIO_PCI_GENERIC=m
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -792,36 +1233,58 @@
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
+CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -840,16 +1303,13 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -859,28 +1319,32 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_EXOFS_FS=m
+# CONFIG_EXOFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 # CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -910,35 +1374,37 @@
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 CONFIG_DLM=m
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -947,65 +1413,140 @@
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 1f4df64..272c5ef 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -191,6 +191,9 @@
 # ifndef cpu_has_64bit_addresses
 # define cpu_has_64bit_addresses	0
 # endif
+# ifndef cpu_vmbits
+# define cpu_vmbits 31
+# endif
 #endif
 
 #ifdef CONFIG_64BIT
@@ -209,6 +212,10 @@
 # ifndef cpu_has_64bit_addresses
 # define cpu_has_64bit_addresses	1
 # endif
+# ifndef cpu_vmbits
+# define cpu_vmbits cpu_data[0].vmbits
+# define __NEED_VMBITS_PROBE
+# endif
 #endif
 
 #if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index 1260443..b39def3 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -58,6 +58,9 @@
 	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
 	int			srsets;	/* Shadow register sets */
 	int			core;	/* physical core number */
+#ifdef CONFIG_64BIT
+	int			vmbits;	/* Virtual memory size in bits */
+#endif
 #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
 	/*
 	 * In the MIPS MT "SMTC" model, each TC is considered
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 0696036..dea4aed 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -135,6 +135,7 @@
 #define CP0_LEGACY_COMPARE_IRQ 7
 
 extern int cp0_compare_irq;
+extern int cp0_compare_irq_shift;
 extern int cp0_perfcount_irq;
 
 #endif /* _ASM_IRQ_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 06f68f4..d206000 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -305,6 +305,7 @@
 	dbdev_tab_t		*chan_dest;
 	au1x_dma_chan_t		*chan_ptr;
 	au1x_ddma_desc_t	*chan_desc_base;
+	u32			cdb_membase; /* kmalloc base of above */
 	au1x_ddma_desc_t	*get_ptr, *put_ptr, *cur_ptr;
 	void			*chan_callparam;
 	void			(*chan_callback)(int, void *);
diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h
new file mode 100644
index 0000000..6f26cb0
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/asic_reg_map.h
@@ -0,0 +1,90 @@
+/*
+ *				asic_reg_map.h
+ *
+ * A macro-enclosed list of the elements for the register_map structure for
+ * use in defining and manipulating the structure.
+ *
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+REGISTER_MAP_ELEMENT(eic_slow0_strt_add)
+REGISTER_MAP_ELEMENT(eic_cfg_bits)
+REGISTER_MAP_ELEMENT(eic_ready_status)
+REGISTER_MAP_ELEMENT(chipver3)
+REGISTER_MAP_ELEMENT(chipver2)
+REGISTER_MAP_ELEMENT(chipver1)
+REGISTER_MAP_ELEMENT(chipver0)
+REGISTER_MAP_ELEMENT(uart1_intstat)
+REGISTER_MAP_ELEMENT(uart1_inten)
+REGISTER_MAP_ELEMENT(uart1_config1)
+REGISTER_MAP_ELEMENT(uart1_config2)
+REGISTER_MAP_ELEMENT(uart1_divisorhi)
+REGISTER_MAP_ELEMENT(uart1_divisorlo)
+REGISTER_MAP_ELEMENT(uart1_data)
+REGISTER_MAP_ELEMENT(uart1_status)
+REGISTER_MAP_ELEMENT(int_stat_3)
+REGISTER_MAP_ELEMENT(int_stat_2)
+REGISTER_MAP_ELEMENT(int_stat_1)
+REGISTER_MAP_ELEMENT(int_stat_0)
+REGISTER_MAP_ELEMENT(int_config)
+REGISTER_MAP_ELEMENT(int_int_scan)
+REGISTER_MAP_ELEMENT(ien_int_3)
+REGISTER_MAP_ELEMENT(ien_int_2)
+REGISTER_MAP_ELEMENT(ien_int_1)
+REGISTER_MAP_ELEMENT(ien_int_0)
+REGISTER_MAP_ELEMENT(int_level_3_3)
+REGISTER_MAP_ELEMENT(int_level_3_2)
+REGISTER_MAP_ELEMENT(int_level_3_1)
+REGISTER_MAP_ELEMENT(int_level_3_0)
+REGISTER_MAP_ELEMENT(int_level_2_3)
+REGISTER_MAP_ELEMENT(int_level_2_2)
+REGISTER_MAP_ELEMENT(int_level_2_1)
+REGISTER_MAP_ELEMENT(int_level_2_0)
+REGISTER_MAP_ELEMENT(int_level_1_3)
+REGISTER_MAP_ELEMENT(int_level_1_2)
+REGISTER_MAP_ELEMENT(int_level_1_1)
+REGISTER_MAP_ELEMENT(int_level_1_0)
+REGISTER_MAP_ELEMENT(int_level_0_3)
+REGISTER_MAP_ELEMENT(int_level_0_2)
+REGISTER_MAP_ELEMENT(int_level_0_1)
+REGISTER_MAP_ELEMENT(int_level_0_0)
+REGISTER_MAP_ELEMENT(int_docsis_en)
+REGISTER_MAP_ELEMENT(mips_pll_setup)
+REGISTER_MAP_ELEMENT(usb_fs)
+REGISTER_MAP_ELEMENT(test_bus)
+REGISTER_MAP_ELEMENT(crt_spare)
+REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
+REGISTER_MAP_ELEMENT(usb2_strap)
+REGISTER_MAP_ELEMENT(ehci_hcapbase)
+REGISTER_MAP_ELEMENT(ohci_hc_revision)
+REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer)
+REGISTER_MAP_ELEMENT(usb2_control)
+REGISTER_MAP_ELEMENT(usb2_stbus_obc)
+REGISTER_MAP_ELEMENT(usb2_stbus_mess_size)
+REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size)
+REGISTER_MAP_ELEMENT(pcie_regs)
+REGISTER_MAP_ELEMENT(tim_ch)
+REGISTER_MAP_ELEMENT(tim_cl)
+REGISTER_MAP_ELEMENT(gpio_dout)
+REGISTER_MAP_ELEMENT(gpio_din)
+REGISTER_MAP_ELEMENT(gpio_dir)
+REGISTER_MAP_ELEMENT(watchdog)
+REGISTER_MAP_ELEMENT(front_panel)
+REGISTER_MAP_ELEMENT(misc_clk_ctl1)
+REGISTER_MAP_ELEMENT(misc_clk_ctl2)
+REGISTER_MAP_ELEMENT(crt_ext_ctl)
+REGISTER_MAP_ELEMENT(register_maps)
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
index 9a65c93..1e11236 100644
--- a/arch/mips/include/asm/mach-powertv/asic_regs.h
+++ b/arch/mips/include/asm/mach-powertv/asic_regs.h
@@ -35,11 +35,12 @@
 #define CRONUS_11	0x0B4C1C21
 #define CRONUSLITE_10	0x0B4C1C40
 
-#define NAND_FLASH_BASE	0x03000000
-#define ZEUS_IO_BASE	0x09000000
+#define NAND_FLASH_BASE		0x03000000
 #define CALLIOPE_IO_BASE	0x08000000
-#define CRONUS_IO_BASE	0x09000000
-#define ASIC_IO_SIZE	0x01000000
+#define CRONUS_IO_BASE		0x09000000
+#define ZEUS_IO_BASE		0x09000000
+
+#define ASIC_IO_SIZE		0x01000000
 
 /* Definitions for backward compatibility */
 #define UART1_INTSTAT	uart1_intstat
@@ -52,96 +53,62 @@
 #define UART1_STATUS	uart1_status
 
 /* ASIC register enumeration */
-struct register_map {
-	u32 eic_slow0_strt_add;
-	u32 eic_cfg_bits;
-	u32 eic_ready_status;
-
-	u32 chipver3;
-	u32 chipver2;
-	u32 chipver1;
-	u32 chipver0;
-
-	u32 uart1_intstat;
-	u32 uart1_inten;
-	u32 uart1_config1;
-	u32 uart1_config2;
-	u32 uart1_divisorhi;
-	u32 uart1_divisorlo;
-	u32 uart1_data;
-	u32 uart1_status;
-
-	u32 int_stat_3;
-	u32 int_stat_2;
-	u32 int_stat_1;
-	u32 int_stat_0;
-	u32 int_config;
-	u32 int_int_scan;
-	u32 ien_int_3;
-	u32 ien_int_2;
-	u32 ien_int_1;
-	u32 ien_int_0;
-	u32 int_level_3_3;
-	u32 int_level_3_2;
-	u32 int_level_3_1;
-	u32 int_level_3_0;
-	u32 int_level_2_3;
-	u32 int_level_2_2;
-	u32 int_level_2_1;
-	u32 int_level_2_0;
-	u32 int_level_1_3;
-	u32 int_level_1_2;
-	u32 int_level_1_1;
-	u32 int_level_1_0;
-	u32 int_level_0_3;
-	u32 int_level_0_2;
-	u32 int_level_0_1;
-	u32 int_level_0_0;
-	u32 int_docsis_en;
-
-	u32 mips_pll_setup;
-	u32 usb_fs;
-	u32 test_bus;
-	u32 crt_spare;
-	u32 usb2_ohci_int_mask;
-	u32 usb2_strap;
-	u32 ehci_hcapbase;
-	u32 ohci_hc_revision;
-	u32 bcm1_bs_lmi_steer;
-	u32 usb2_control;
-	u32 usb2_stbus_obc;
-	u32 usb2_stbus_mess_size;
-	u32 usb2_stbus_chunk_size;
-
-	u32 pcie_regs;
-	u32 tim_ch;
-	u32 tim_cl;
-	u32 gpio_dout;
-	u32 gpio_din;
-	u32 gpio_dir;
-	u32 watchdog;
-	u32 front_panel;
-
-	u32 register_maps;
+union register_map_entry {
+	unsigned long phys;
+	u32 *virt;
 };
 
-extern enum asic_type asic;
-extern const struct register_map *register_map;
-extern unsigned long asic_phy_base;	/* Physical address of ASIC */
-extern unsigned long asic_base;		/* Virtual address of ASIC */
+#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
+struct register_map {
+#include <asm/mach-powertv/asic_reg_map.h>
+};
+#undef REGISTER_MAP_ELEMENT
+
+/**
+ * register_map_offset_phys - add an offset to the physical address
+ * @map:	Pointer to the &struct register_map
+ * @offset:	Value to add
+ *
+ * Only adds the base to non-zero physical addresses
+ */
+static inline void register_map_offset_phys(struct register_map *map,
+	unsigned long offset)
+{
+#define REGISTER_MAP_ELEMENT(x)		do {				\
+		if (map->x.phys != 0)					\
+			map->x.phys += offset;				\
+	} while (false);
+
+#include <asm/mach-powertv/asic_reg_map.h>
+#undef REGISTER_MAP_ELEMENT
+}
+
+/**
+ * register_map_virtualize - Convert &register_map to virtual addresses
+ * @map:	Pointer to &register_map to virtualize
+ */
+static inline void register_map_virtualize(struct register_map *map)
+{
+#define REGISTER_MAP_ELEMENT(x)		do {				\
+		map->x.virt = (!map->x.phys) ? NULL :			\
+			UNCAC_ADDR(phys_to_virt(map->x.phys));		\
+	} while (false);
+
+#include <asm/mach-powertv/asic_reg_map.h>
+#undef REGISTER_MAP_ELEMENT
+}
+
+extern struct register_map _asic_register_map;
 
 /*
  * Macros to interface to registers through their ioremapped address
- * asic_reg_offset	Returns the offset of a given register from the start
- *			of the ASIC address space
  * asic_reg_phys_addr	Returns the physical address of the given register
  * asic_reg_addr	Returns the iomapped virtual address of the given
  *			register.
  */
-#define asic_reg_offset(x)	(register_map->x)
-#define asic_reg_phys_addr(x)	(asic_phy_base + asic_reg_offset(x))
-#define asic_reg_addr(x) \
-	((unsigned int *) (asic_base + asic_reg_offset(x)))
+#define asic_reg_addr(x)	(_asic_register_map.x.virt)
+#define asic_reg_phys_addr(x)	(virt_to_phys((void *) CAC_ADDR(	\
+					(unsigned long) asic_reg_addr(x))))
 
 /*
  * The asic_reg macro is gone. It should be replaced by either asic_read or
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index a581d60..f4ab313 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -406,6 +406,16 @@
 #define ST0_XX			0x80000000	/* MIPS IV naming */
 
 /*
+ * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2)
+ *
+ * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
+ */
+#define INTCTLB_IPPCI		26
+#define INTCTLF_IPPCI		(_ULCAST_(7) << INTCTLB_IPPCI)
+#define INTCTLB_IPTI		29
+#define INTCTLF_IPTI		(_ULCAST_(7) << INTCTLB_IPTI)
+
+/*
  * Bitfields and bit numbers in the coprocessor 0 cause register.
  *
  * Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
@@ -434,6 +444,8 @@
 #define  CAUSEF_IV		(_ULCAST_(1)   << 23)
 #define  CAUSEB_CE		28
 #define  CAUSEF_CE		(_ULCAST_(3)   << 28)
+#define  CAUSEB_TI		30
+#define  CAUSEF_TI		(_ULCAST_(1)   << 30)
 #define  CAUSEB_BD		31
 #define  CAUSEF_BD		(_ULCAST_(1)   << 31)
 
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 9cd5089..8eda30b 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -110,7 +110,9 @@
 #define VMALLOC_START		MAP_BASE
 #define VMALLOC_END	\
 	(VMALLOC_START + \
-	 PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32))
+	 min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
+	     (1UL << cpu_vmbits)) - (1UL << 32))
+
 #if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
 	VMALLOC_START != CKSSEG
 /* Load modules into 32bit-compatible segment. */
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index b469ad0..0b2450c 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -97,7 +97,7 @@
  */
 static int c0_compare_int_pending(void)
 {
-	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+	return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP);
 }
 
 /*
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 80e202e..758ad42 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -284,6 +284,15 @@
 	return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
 }
 
+static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
+{
+#ifdef __NEED_VMBITS_PROBE
+	write_c0_entryhi(0x3fffffffffffe000ULL);
+	back_to_back_c0_hazard();
+	c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL);
+#endif
+}
+
 #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
 		| MIPS_CPU_COUNTER)
 
@@ -969,6 +978,8 @@
 		c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
 	else
 		c->srsets = 1;
+
+	cpu_probe_vmbits(c);
 }
 
 __cpuinit void cpu_report(void)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 308e434..31b204b 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1403,6 +1403,7 @@
  * Timer interrupt
  */
 int cp0_compare_irq;
+int cp0_compare_irq_shift;
 
 /*
  * Performance counter IRQ or -1 if shared with timer
@@ -1493,12 +1494,14 @@
 	 *  o read IntCtl.IPPCI to determine the performance counter interrupt
 	 */
 	if (cpu_has_mips_r2) {
-		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-		cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
 		if (cp0_perfcount_irq == cp0_compare_irq)
 			cp0_perfcount_irq = -1;
 	} else {
 		cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
+		cp0_compare_irq_shift = cp0_compare_irq;
 		cp0_perfcount_irq = -1;
 	}
 
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 94e05e5..e06f1af 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -174,7 +174,7 @@
  * Probe Octeon's caches
  *
  */
-static void __devinit probe_octeon(void)
+static void __cpuinit probe_octeon(void)
 {
 	unsigned long icache_size;
 	unsigned long dcache_size;
@@ -235,7 +235,7 @@
  * Setup the Octeon cache flush routines
  *
  */
-void __devinit octeon_cache_init(void)
+void __cpuinit octeon_cache_init(void)
 {
 	extern unsigned long ebase;
 	extern char except_vec2_octeon;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 102b2df..e716caf 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -155,7 +155,7 @@
 	protection_map[15] = PAGE_SHARED;
 }
 
-void __devinit cpu_cache_init(void)
+void __cpuinit cpu_cache_init(void)
 {
 	if (cpu_has_3k_cache) {
 		extern void __weak r3k_cache_init(void);
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index e274fda..127d732 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,5 +1,6 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
index 03d3884..1ae6623 100644
--- a/arch/mips/powertv/asic/asic-calliope.c
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -23,76 +23,79 @@
  * Description:  Defines the platform resources for the SA settop.
  */
 
+#include <linux/init.h>
 #include <asm/mach-powertv/asic.h>
 
-const struct register_map calliope_register_map = {
-	.eic_slow0_strt_add = 0x800000,
-	.eic_cfg_bits = 0x800038,
-	.eic_ready_status = 0x80004c,
+#define CALLIOPE_ADDR(x)	(CALLIOPE_IO_BASE + (x))
 
-	.chipver3 = 0xA00800,
-	.chipver2 = 0xA00804,
-	.chipver1 = 0xA00808,
-	.chipver0 = 0xA0080c,
+const struct register_map calliope_register_map __initdata = {
+	.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
+	.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
+	.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
+
+	.chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)},
+	.chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)},
+	.chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)},
+	.chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)},
 
 	/* The registers of IRBlaster */
-	.uart1_intstat = 0xA01800,
-	.uart1_inten = 0xA01804,
-	.uart1_config1 = 0xA01808,
-	.uart1_config2 = 0xA0180C,
-	.uart1_divisorhi = 0xA01810,
-	.uart1_divisorlo = 0xA01814,
-	.uart1_data = 0xA01818,
-	.uart1_status = 0xA0181C,
+	.uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)},
+	.uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)},
+	.uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)},
+	.uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)},
+	.uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)},
+	.uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)},
+	.uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)},
+	.uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)},
 
-	.int_stat_3 = 0xA02800,
-	.int_stat_2 = 0xA02804,
-	.int_stat_1 = 0xA02808,
-	.int_stat_0 = 0xA0280c,
-	.int_config = 0xA02810,
-	.int_int_scan = 0xA02818,
-	.ien_int_3 = 0xA02830,
-	.ien_int_2 = 0xA02834,
-	.ien_int_1 = 0xA02838,
-	.ien_int_0 = 0xA0283c,
-	.int_level_3_3 = 0xA02880,
-	.int_level_3_2 = 0xA02884,
-	.int_level_3_1 = 0xA02888,
-	.int_level_3_0 = 0xA0288c,
-	.int_level_2_3 = 0xA02890,
-	.int_level_2_2 = 0xA02894,
-	.int_level_2_1 = 0xA02898,
-	.int_level_2_0 = 0xA0289c,
-	.int_level_1_3 = 0xA028a0,
-	.int_level_1_2 = 0xA028a4,
-	.int_level_1_1 = 0xA028a8,
-	.int_level_1_0 = 0xA028ac,
-	.int_level_0_3 = 0xA028b0,
-	.int_level_0_2 = 0xA028b4,
-	.int_level_0_1 = 0xA028b8,
-	.int_level_0_0 = 0xA028bc,
-	.int_docsis_en = 0xA028F4,
+	.int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)},
+	.int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)},
+	.int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)},
+	.int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)},
+	.int_config = {.phys = CALLIOPE_ADDR(0xA02810)},
+	.int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)},
+	.ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)},
+	.ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)},
+	.ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)},
+	.ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)},
+	.int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)},
+	.int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)},
+	.int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)},
+	.int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)},
+	.int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)},
+	.int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)},
+	.int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)},
+	.int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)},
+	.int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)},
+	.int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)},
+	.int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)},
+	.int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)},
+	.int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)},
+	.int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)},
+	.int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)},
+	.int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)},
+	.int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)},
 
-	.mips_pll_setup = 0x980000,
-	.usb_fs = 0x980030,     	/* -default 72800028- */
-	.test_bus = 0x9800CC,
-	.crt_spare = 0x9800d4,
-	.usb2_ohci_int_mask = 0x9A000c,
-	.usb2_strap = 0x9A0014,
-	.ehci_hcapbase = 0x9BFE00,
-	.ohci_hc_revision = 0x9BFC00,
-	.bcm1_bs_lmi_steer = 0x9E0004,
-	.usb2_control = 0x9E0054,
-	.usb2_stbus_obc = 0x9BFF00,
-	.usb2_stbus_mess_size = 0x9BFF04,
-	.usb2_stbus_chunk_size = 0x9BFF08,
+	.mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)},
+	.usb_fs = {.phys = CALLIOPE_ADDR(0x980030)},
+	.test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)},
+	.crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)},
+	.usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)},
+	.usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)},
+	.ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)},
+	.ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)},
+	.bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)},
+	.usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)},
+	.usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)},
+	.usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)},
+	.usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)},
 
-	.pcie_regs = 0x000000,      	/* -doesn't exist- */
-	.tim_ch = 0xA02C10,
-	.tim_cl = 0xA02C14,
-	.gpio_dout = 0xA02c20,
-	.gpio_din = 0xA02c24,
-	.gpio_dir = 0xA02c2C,
-	.watchdog = 0xA02c30,
-	.front_panel = 0x000000,    	/* -not used- */
+	.pcie_regs = {.phys = 0x000000},      	/* -doesn't exist- */
+	.tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)},
+	.tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)},
+	.gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)},
+	.gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)},
+	.gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)},
+	.watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)},
+	.front_panel = {.phys = 0x000000},    	/* -not used- */
 };
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
index 5f4589c..5bb64bf 100644
--- a/arch/mips/powertv/asic/asic-cronus.c
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -23,76 +23,79 @@
  * Description:  Defines the platform resources for the SA settop.
  */
 
+#include <linux/init.h>
 #include <asm/mach-powertv/asic.h>
 
-const struct register_map cronus_register_map = {
-	.eic_slow0_strt_add = 0x000000,
-	.eic_cfg_bits = 0x000038,
-	.eic_ready_status = 0x00004C,
+#define CRONUS_ADDR(x)	(CRONUS_IO_BASE + (x))
 
-	.chipver3 = 0x2A0800,
-	.chipver2 = 0x2A0804,
-	.chipver1 = 0x2A0808,
-	.chipver0 = 0x2A080C,
+const struct register_map cronus_register_map __initdata = {
+	.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
+	.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
+	.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
+
+	.chipver3 = {.phys = CRONUS_ADDR(0x2A0800)},
+	.chipver2 = {.phys = CRONUS_ADDR(0x2A0804)},
+	.chipver1 = {.phys = CRONUS_ADDR(0x2A0808)},
+	.chipver0 = {.phys = CRONUS_ADDR(0x2A080C)},
 
 	/* The registers of IRBlaster */
-	.uart1_intstat = 0x2A1800,
-	.uart1_inten = 0x2A1804,
-	.uart1_config1 = 0x2A1808,
-	.uart1_config2 = 0x2A180C,
-	.uart1_divisorhi = 0x2A1810,
-	.uart1_divisorlo = 0x2A1814,
-	.uart1_data = 0x2A1818,
-	.uart1_status = 0x2A181C,
+	.uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)},
+	.uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)},
+	.uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)},
+	.uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)},
+	.uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)},
+	.uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)},
+	.uart1_data = {.phys = CRONUS_ADDR(0x2A1818)},
+	.uart1_status = {.phys = CRONUS_ADDR(0x2A181C)},
 
-	.int_stat_3 = 0x2A2800,
-	.int_stat_2 = 0x2A2804,
-	.int_stat_1 = 0x2A2808,
-	.int_stat_0 = 0x2A280C,
-	.int_config = 0x2A2810,
-	.int_int_scan = 0x2A2818,
-	.ien_int_3 = 0x2A2830,
-	.ien_int_2 = 0x2A2834,
-	.ien_int_1 = 0x2A2838,
-	.ien_int_0 = 0x2A283C,
-	.int_level_3_3 = 0x2A2880,
-	.int_level_3_2 = 0x2A2884,
-	.int_level_3_1 = 0x2A2888,
-	.int_level_3_0 = 0x2A288C,
-	.int_level_2_3 = 0x2A2890,
-	.int_level_2_2 = 0x2A2894,
-	.int_level_2_1 = 0x2A2898,
-	.int_level_2_0 = 0x2A289C,
-	.int_level_1_3 = 0x2A28A0,
-	.int_level_1_2 = 0x2A28A4,
-	.int_level_1_1 = 0x2A28A8,
-	.int_level_1_0 = 0x2A28AC,
-	.int_level_0_3 = 0x2A28B0,
-	.int_level_0_2 = 0x2A28B4,
-	.int_level_0_1 = 0x2A28B8,
-	.int_level_0_0 = 0x2A28BC,
-	.int_docsis_en = 0x2A28F4,
+	.int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)},
+	.int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)},
+	.int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)},
+	.int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)},
+	.int_config = {.phys = CRONUS_ADDR(0x2A2810)},
+	.int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)},
+	.ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)},
+	.ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)},
+	.ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)},
+	.ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)},
+	.int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)},
+	.int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)},
+	.int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)},
+	.int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)},
+	.int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)},
+	.int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)},
+	.int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)},
+	.int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)},
+	.int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)},
+	.int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)},
+	.int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)},
+	.int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)},
+	.int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)},
+	.int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)},
+	.int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)},
+	.int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)},
+	.int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
 
-	.mips_pll_setup = 0x1C0000,
-	.usb_fs = 0x1C0018,
-	.test_bus = 0x1C00CC,
-	.crt_spare = 0x1c00d4,
-	.usb2_ohci_int_mask = 0x20000C,
-	.usb2_strap = 0x200014,
-	.ehci_hcapbase = 0x21FE00,
-	.ohci_hc_revision = 0x1E0000,
-	.bcm1_bs_lmi_steer = 0x2E0008,
-	.usb2_control = 0x2E004C,
-	.usb2_stbus_obc = 0x21FF00,
-	.usb2_stbus_mess_size = 0x21FF04,
-	.usb2_stbus_chunk_size = 0x21FF08,
+	.mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
+	.usb_fs = {.phys = CRONUS_ADDR(0x1C0018)},
+	.test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
+	.crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
+	.usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
+	.usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
+	.ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
+	.ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)},
+	.bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
+	.usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
+	.usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
+	.usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)},
+	.usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)},
 
-	.pcie_regs = 0x220000,
-	.tim_ch = 0x2A2C10,
-	.tim_cl = 0x2A2C14,
-	.gpio_dout = 0x2A2C20,
-	.gpio_din = 0x2A2C24,
-	.gpio_dir = 0x2A2C2C,
-	.watchdog = 0x2A2C30,
-	.front_panel = 0x2A3800,
+	.pcie_regs = {.phys = CRONUS_ADDR(0x220000)},
+	.tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)},
+	.tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)},
+	.gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)},
+	.gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)},
+	.gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)},
+	.watchdog = {.phys = CRONUS_ADDR(0x2A2C30)},
+	.front_panel = {.phys = CRONUS_ADDR(0x2A3800)},
 };
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
index 1469daa..095cbe10 100644
--- a/arch/mips/powertv/asic/asic-zeus.c
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -23,76 +23,79 @@
  * Description:  Defines the platform resources for the SA settop.
  */
 
+#include <linux/init.h>
 #include <asm/mach-powertv/asic.h>
 
-const struct register_map zeus_register_map = {
-	.eic_slow0_strt_add = 0x000000,
-	.eic_cfg_bits = 0x000038,
-	.eic_ready_status = 0x00004c,
+#define ZEUS_ADDR(x)	(ZEUS_IO_BASE + (x))
 
-	.chipver3 = 0x280800,
-	.chipver2 = 0x280804,
-	.chipver1 = 0x280808,
-	.chipver0 = 0x28080c,
+const struct register_map zeus_register_map __initdata = {
+	.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
+	.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
+	.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
+
+	.chipver3 = {.phys = ZEUS_ADDR(0x280800)},
+	.chipver2 = {.phys = ZEUS_ADDR(0x280804)},
+	.chipver1 = {.phys = ZEUS_ADDR(0x280808)},
+	.chipver0 = {.phys = ZEUS_ADDR(0x28080c)},
 
 	/* The registers of IRBlaster */
-	.uart1_intstat = 0x281800,
-	.uart1_inten = 0x281804,
-	.uart1_config1 = 0x281808,
-	.uart1_config2 = 0x28180C,
-	.uart1_divisorhi = 0x281810,
-	.uart1_divisorlo = 0x281814,
-	.uart1_data = 0x281818,
-	.uart1_status = 0x28181C,
+	.uart1_intstat = {.phys = ZEUS_ADDR(0x281800)},
+	.uart1_inten = {.phys = ZEUS_ADDR(0x281804)},
+	.uart1_config1 = {.phys = ZEUS_ADDR(0x281808)},
+	.uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)},
+	.uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)},
+	.uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)},
+	.uart1_data = {.phys = ZEUS_ADDR(0x281818)},
+	.uart1_status = {.phys = ZEUS_ADDR(0x28181C)},
 
-	.int_stat_3 = 0x282800,
-	.int_stat_2 = 0x282804,
-	.int_stat_1 = 0x282808,
-	.int_stat_0 = 0x28280c,
-	.int_config = 0x282810,
-	.int_int_scan = 0x282818,
-	.ien_int_3 = 0x282830,
-	.ien_int_2 = 0x282834,
-	.ien_int_1 = 0x282838,
-	.ien_int_0 = 0x28283c,
-	.int_level_3_3 = 0x282880,
-	.int_level_3_2 = 0x282884,
-	.int_level_3_1 = 0x282888,
-	.int_level_3_0 = 0x28288c,
-	.int_level_2_3 = 0x282890,
-	.int_level_2_2 = 0x282894,
-	.int_level_2_1 = 0x282898,
-	.int_level_2_0 = 0x28289c,
-	.int_level_1_3 = 0x2828a0,
-	.int_level_1_2 = 0x2828a4,
-	.int_level_1_1 = 0x2828a8,
-	.int_level_1_0 = 0x2828ac,
-	.int_level_0_3 = 0x2828b0,
-	.int_level_0_2 = 0x2828b4,
-	.int_level_0_1 = 0x2828b8,
-	.int_level_0_0 = 0x2828bc,
-	.int_docsis_en = 0x2828F4,
+	.int_stat_3 = {.phys = ZEUS_ADDR(0x282800)},
+	.int_stat_2 = {.phys = ZEUS_ADDR(0x282804)},
+	.int_stat_1 = {.phys = ZEUS_ADDR(0x282808)},
+	.int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)},
+	.int_config = {.phys = ZEUS_ADDR(0x282810)},
+	.int_int_scan = {.phys = ZEUS_ADDR(0x282818)},
+	.ien_int_3 = {.phys = ZEUS_ADDR(0x282830)},
+	.ien_int_2 = {.phys = ZEUS_ADDR(0x282834)},
+	.ien_int_1 = {.phys = ZEUS_ADDR(0x282838)},
+	.ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)},
+	.int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)},
+	.int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)},
+	.int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)},
+	.int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)},
+	.int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)},
+	.int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)},
+	.int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)},
+	.int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)},
+	.int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)},
+	.int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)},
+	.int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)},
+	.int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)},
+	.int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)},
+	.int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)},
+	.int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)},
+	.int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)},
+	.int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)},
 
-	.mips_pll_setup = 0x1a0000,
-	.usb_fs = 0x1a0018,
-	.test_bus = 0x1a0238,
-	.crt_spare = 0x1a0090,
-	.usb2_ohci_int_mask = 0x1e000c,
-	.usb2_strap = 0x1e0014,
-	.ehci_hcapbase = 0x1FFE00,
-	.ohci_hc_revision = 0x1FFC00,
-	.bcm1_bs_lmi_steer = 0x2C0008,
-	.usb2_control = 0x2c01a0,
-	.usb2_stbus_obc = 0x1FFF00,
-	.usb2_stbus_mess_size = 0x1FFF04,
-	.usb2_stbus_chunk_size = 0x1FFF08,
+	.mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)},
+	.usb_fs = {.phys = ZEUS_ADDR(0x1a0018)},
+	.test_bus = {.phys = ZEUS_ADDR(0x1a0238)},
+	.crt_spare = {.phys = ZEUS_ADDR(0x1a0090)},
+	.usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)},
+	.usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)},
+	.ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)},
+	.ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)},
+	.bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)},
+	.usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)},
+	.usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)},
+	.usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)},
+	.usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)},
 
-	.pcie_regs = 0x200000,
-	.tim_ch = 0x282C10,
-	.tim_cl = 0x282C14,
-	.gpio_dout = 0x282c20,
-	.gpio_din = 0x282c24,
-	.gpio_dir = 0x282c2C,
-	.watchdog = 0x282c30,
-	.front_panel = 0x283800,
+	.pcie_regs = {.phys = ZEUS_ADDR(0x200000)},
+	.tim_ch = {.phys = ZEUS_ADDR(0x282C10)},
+	.tim_cl = {.phys = ZEUS_ADDR(0x282C14)},
+	.gpio_dout = {.phys = ZEUS_ADDR(0x282c20)},
+	.gpio_din = {.phys = ZEUS_ADDR(0x282c24)},
+	.gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)},
+	.watchdog = {.phys = ZEUS_ADDR(0x282c30)},
+	.front_panel = {.phys = ZEUS_ADDR(0x283800)},
 };
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index bae8288..6a88219 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -67,8 +67,8 @@
 
 unsigned int platform_features;
 unsigned int platform_family;
-const struct register_map  *register_map;
-EXPORT_SYMBOL(register_map);			/* Exported for testing */
+struct register_map _asic_register_map;
+EXPORT_SYMBOL(_asic_register_map);		/* Exported for testing */
 unsigned long asic_phy_base;
 unsigned long asic_base;
 EXPORT_SYMBOL(asic_base);			/* Exported for testing */
@@ -418,6 +418,15 @@
 {
 }
 
+static void __init set_register_map(unsigned long phys_base,
+	const struct register_map *map)
+{
+	asic_phy_base = phys_base;
+	_asic_register_map = *map;
+	register_map_virtualize(&_asic_register_map);
+	asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE);
+}
+
 /**
  * configure_platform - configuration based on platform type.
  */
@@ -431,10 +440,7 @@
 	case FAMILY_1500VZF:
 		platform_features = FFS_CAPABLE;
 		asic = ASIC_CALLIOPE;
-		asic_phy_base = CALLIOPE_IO_BASE;
-		register_map = &calliope_register_map;
-		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
-			ASIC_IO_SIZE);
+		set_register_map(CALLIOPE_IO_BASE, &calliope_register_map);
 
 		if (platform_family == FAMILY_1500VZE) {
 			gp_resources = non_dvr_vze_calliope_resources;
@@ -455,10 +461,7 @@
 		platform_features = FFS_CAPABLE | PCIE_CAPABLE |
 			DISPLAY_CAPABLE;
 		asic = ASIC_ZEUS;
-		asic_phy_base = ZEUS_IO_BASE;
-		register_map = &zeus_register_map;
-		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
-			ASIC_IO_SIZE);
+		set_register_map(ZEUS_IO_BASE, &zeus_register_map);
 		gp_resources = non_dvr_zeus_resources;
 
 		pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
@@ -471,11 +474,6 @@
 		/* The settop has PCIE but it isn't used, so don't advertise
 		 * it*/
 		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
-		asic_phy_base = CRONUS_IO_BASE;   /* same as Cronus */
-		register_map = &cronus_register_map;   /* same as Cronus */
-		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
-			ASIC_IO_SIZE);
-		gp_resources = non_dvr_cronuslite_resources;
 
 		/* ASIC version will determine if this is a real CronusLite or
 		 * Castrati(Cronus) */
@@ -489,6 +487,9 @@
 		else
 			asic = ASIC_CRONUSLITE;
 
+		/* Cronus and Cronus Lite have the same register map */
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+		gp_resources = non_dvr_cronuslite_resources;
 		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
 			"chipversion=0x%08X\n",
 			(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
@@ -498,10 +499,7 @@
 	case FAMILY_4600VZA:
 		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 		asic = ASIC_CRONUS;
-		asic_phy_base = CRONUS_IO_BASE;
-		register_map = &cronus_register_map;
-		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
-			ASIC_IO_SIZE);
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 		gp_resources = non_dvr_cronus_resources;
 
 		pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
@@ -512,10 +510,7 @@
 		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
 			DISPLAY_CAPABLE;
 		asic = ASIC_ZEUS;
-		asic_phy_base = ZEUS_IO_BASE;
-		register_map = &zeus_register_map;
-		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
-			ASIC_IO_SIZE);
+		set_register_map(ZEUS_IO_BASE, &zeus_register_map);
 		gp_resources = dvr_zeus_resources;
 
 		pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
@@ -526,10 +521,7 @@
 		platform_features = DVR_CAPABLE | PCIE_CAPABLE |
 			DISPLAY_CAPABLE;
 		asic = ASIC_CRONUS;
-		asic_phy_base = CRONUS_IO_BASE;
-		register_map = &cronus_register_map;
-		asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
-			ASIC_IO_SIZE);
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 		gp_resources = dvr_cronus_resources;
 
 		pr_info("Platform: 8600/Vz Class B - CRONUS, "
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index 46f0069..31e2583 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -404,7 +404,7 @@
 	if (!rm200_pic_master)
 		return;
 	rm200_pic_slave = ioremap_nocache(0x160000a0, 4);
-	if (!rm200_pic_master) {
+	if (!rm200_pic_slave) {
 		iounmap(rm200_pic_master);
 		return;
 	}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 524d935..f388dc6 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -18,7 +18,6 @@
 	select BUG
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
-	select HAVE_ARCH_TRACEHOOK
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index f7064ab..9e74bfe 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -18,7 +18,6 @@
 
 #include <asm/io.h>
 #include <asm/system.h>
-#include <asm/cache.h>		/* for L1_CACHE_BYTES */
 #include <asm/superio.h>
 
 #define DEBUG_RESOURCES 0
@@ -123,6 +122,10 @@
 	} else {
 		printk(KERN_WARNING "pci_bios != NULL but init() is!\n");
 	}
+
+	/* Set the CLS for PCI as early as possible. */
+	pci_cache_line_size = pci_dfl_cache_line_size;
+
 	return 0;
 }
 
@@ -171,7 +174,7 @@
 	** upper byte is PCI_LATENCY_TIMER.
 	*/
 	pci_write_config_word(dev, PCI_CACHE_LINE_SIZE,
-				(0x80 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
+			      (0x80 << 8) | pci_cache_line_size);
 }
 
 
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index fb37ac5..35c827e 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -468,7 +468,9 @@
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	tracehook_signal_handler(sig, info, ka, regs, 0);
+	tracehook_signal_handler(sig, info, ka, regs, 
+		test_thread_flag(TIF_SINGLESTEP) ||
+		test_thread_flag(TIF_BLOCKSTEP));
 
 	return 1;
 }
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 826a30a..bb2465b 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -20,7 +20,7 @@
 all: $(obj)/zImage
 
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-		 -fno-strict-aliasing -Os -msoft-float -pipe -D__KERNEL__\
+		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
 		 -isystem $(shell $(CROSS32CC) -print-file-name=include)
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
@@ -34,8 +34,6 @@
 endif
 
 BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
-BOOTCFLAGS	+= -include include/linux/autoconf.h -Iarch/powerpc/include
-BOOTCFLAGS	+= -Iinclude
 
 DTS_FLAGS	?= -p 1024
 
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 390512a..f4594ed 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -43,6 +43,9 @@
 # cross-compilation prefix
 CROSS=
 
+# mkimage wrapper script
+MKIMAGE=$srctree/scripts/mkuboot.sh
+
 # directory for object and other files used by this script
 object=arch/powerpc/boot
 objbin=$object
@@ -267,7 +270,7 @@
 case "$platform" in
 uboot)
     rm -f "$ofile"
-    mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
+    ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
 	$uboot_version -d "$vmz" "$ofile"
     if [ -z "$cacheit" ]; then
 	rm -f "$vmz"
@@ -327,7 +330,7 @@
     ;;
 cuboot*)
     gzip -f -9 "$ofile"
-    mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
+    ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
             $uboot_version -d "$ofile".gz "$ofile"
     ;;
 treeboot*)
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 173a5bb..8e95f8d 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:33:07 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,31 +104,40 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +149,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +168,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +224,7 @@
 CONFIG_ACADIA=y
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -208,10 +267,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -227,10 +288,12 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +318,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +336,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -316,6 +378,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -329,6 +392,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,8 +406,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -355,6 +425,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -367,9 +438,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -445,7 +516,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -461,6 +531,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -491,7 +562,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -512,6 +587,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -530,17 +607,18 @@
 CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -553,6 +631,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -598,6 +677,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -614,6 +694,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -636,27 +721,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -678,7 +749,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -689,14 +765,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -706,6 +785,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -760,7 +844,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +859,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -790,11 +874,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -804,6 +890,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -812,16 +899,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -833,35 +927,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -877,13 +981,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -892,10 +999,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -923,11 +1032,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -964,6 +1075,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -972,5 +1084,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index e9b8495..918f23f 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:48 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:37:34 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,31 +104,40 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +149,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +168,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +224,7 @@
 # CONFIG_ACADIA is not set
 CONFIG_EP405=y
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -210,10 +269,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -229,10 +290,12 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -257,6 +320,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -274,14 +338,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,6 +380,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -331,6 +394,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,8 +408,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -357,6 +427,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -369,9 +440,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -447,7 +518,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -463,6 +533,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -476,12 +547,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -501,7 +577,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -522,6 +602,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +622,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -548,6 +633,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -558,9 +644,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -570,6 +660,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -579,14 +670,14 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +699,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -653,6 +745,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -669,6 +762,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -691,27 +789,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -748,14 +832,16 @@
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -775,11 +861,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -807,7 +893,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -822,6 +907,7 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -831,7 +917,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -842,14 +933,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -859,6 +953,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -913,7 +1012,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -927,8 +1025,48 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -943,11 +1081,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -957,6 +1097,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -965,16 +1106,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -986,35 +1134,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1030,13 +1188,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1045,10 +1206,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1076,11 +1239,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1117,6 +1282,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1125,5 +1291,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index 8c019d7..f87ef03 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:45:11 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,31 +104,40 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +149,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +168,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +224,7 @@
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 CONFIG_HCU4=y
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -208,10 +267,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -227,10 +288,12 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +318,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +336,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -316,6 +378,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -329,6 +392,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -341,8 +406,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -355,6 +425,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -367,9 +438,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -445,7 +516,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -461,6 +531,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -473,12 +544,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -498,7 +574,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -519,6 +599,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -537,7 +619,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -545,6 +630,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -555,9 +641,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -567,6 +657,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -576,14 +667,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -596,6 +686,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -641,6 +732,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -657,13 +749,17 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -680,27 +776,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -722,7 +804,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -733,14 +820,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -750,6 +840,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -804,7 +899,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -820,6 +914,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -834,11 +929,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +945,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -856,16 +954,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -877,35 +982,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -921,13 +1036,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -936,10 +1054,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -967,11 +1087,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1008,6 +1130,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1016,5 +1139,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 9a05ec0..19fbcb0 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 13:28:37 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:51:23 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -29,7 +30,9 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -52,6 +55,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -79,11 +83,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -121,22 +127,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -144,6 +149,8 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -190,6 +224,7 @@
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 CONFIG_KILAUEA=y
 # CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
@@ -233,10 +268,11 @@
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -252,8 +288,7 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -343,6 +378,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -370,7 +406,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -383,6 +425,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -395,9 +438,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -498,6 +541,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -574,16 +618,17 @@
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -596,6 +641,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -641,6 +687,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -656,6 +703,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -696,11 +744,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -709,10 +752,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -730,6 +769,11 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -753,6 +797,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -779,6 +824,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -790,7 +836,6 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -810,10 +855,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -821,6 +869,7 @@
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -868,6 +917,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -889,7 +939,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -913,6 +965,7 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -920,6 +973,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -979,7 +1033,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1037,6 +1090,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1054,6 +1108,7 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1072,10 +1127,12 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1099,10 +1156,10 @@
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1124,13 +1181,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1172,11 +1232,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 1467475..eb41cd6 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Wed Jun  3 09:11:02 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:55:12 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -29,14 +30,16 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -78,11 +83,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -108,7 +115,6 @@
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,6 +127,13 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -129,7 +142,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -137,6 +149,13 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +168,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -178,6 +224,7 @@
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 CONFIG_MAKALU=y
 # CONFIG_WALNUT is not set
@@ -220,10 +267,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -239,9 +288,8 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -330,6 +378,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,6 +393,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -356,7 +406,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -369,6 +425,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -381,9 +438,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -474,6 +531,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -504,14 +562,17 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -546,16 +607,18 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -568,6 +631,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -613,6 +677,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -629,6 +694,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -651,27 +721,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -695,6 +751,10 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -705,14 +765,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -770,7 +833,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -818,6 +880,7 @@
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -827,6 +890,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -844,10 +908,14 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,11 +927,12 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -873,24 +942,26 @@
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -910,13 +981,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -958,11 +1032,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 5ab29dd..bfff0ea 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:57 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:56:30 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +53,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -67,9 +75,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -84,31 +104,40 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -120,6 +149,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -131,8 +168,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,19 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -166,6 +224,7 @@
 # CONFIG_ACADIA is not set
 # CONFIG_EP405 is not set
 # CONFIG_HCU4 is not set
+# CONFIG_HOTFOOT is not set
 # CONFIG_KILAUEA is not set
 # CONFIG_MAKALU is not set
 CONFIG_WALNUT=y
@@ -211,10 +270,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -230,10 +291,12 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,6 +321,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,14 +339,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -319,6 +381,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -332,6 +395,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -344,8 +409,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -358,6 +428,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -370,9 +441,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -448,7 +519,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -464,6 +534,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -476,12 +547,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -501,7 +577,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -522,6 +602,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +622,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -548,6 +633,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -558,9 +644,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -570,6 +660,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -579,14 +670,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -599,6 +689,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -644,6 +735,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -660,6 +752,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -682,27 +779,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -727,7 +810,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -743,7 +826,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -754,14 +842,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -771,6 +862,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -825,7 +921,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -841,6 +936,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -855,11 +951,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -869,6 +967,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -877,16 +976,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -898,35 +1004,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -942,13 +1058,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -957,10 +1076,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -988,11 +1109,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1029,6 +1152,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1037,5 +1161,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 6f976b5..1f6d049 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug 13 14:14:07 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:02:35 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -33,7 +34,9 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -56,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -83,11 +87,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -121,22 +127,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -144,6 +149,8 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -198,6 +232,7 @@
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -241,10 +276,11 @@
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -260,8 +296,7 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
@@ -352,6 +387,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -379,7 +415,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -392,6 +434,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -404,9 +447,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -497,6 +540,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -573,16 +617,17 @@
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -595,6 +640,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -640,6 +686,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -656,6 +703,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -696,11 +744,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -709,10 +752,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -730,6 +769,11 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -753,6 +797,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -779,6 +824,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -790,9 +836,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -810,10 +854,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -821,6 +868,7 @@
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -858,6 +906,7 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -865,6 +914,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -934,7 +984,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -993,6 +1042,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1010,6 +1060,7 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1028,10 +1079,12 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1055,10 +1108,10 @@
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1080,7 +1133,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index e57f1e4..788faac 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:33 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:09:03 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +57,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,9 +79,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,8 +108,12 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -99,19 +123,25 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -123,6 +153,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,8 +172,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,19 +180,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +235,8 @@
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -218,10 +279,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +300,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -265,6 +331,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,14 +349,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -326,6 +391,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -339,6 +405,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,8 +419,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -365,6 +438,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -386,6 +460,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -398,12 +473,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -423,7 +503,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -444,6 +528,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -462,7 +548,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -470,6 +559,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -480,9 +570,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -492,6 +586,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -501,14 +596,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -521,6 +615,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -566,6 +661,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -582,6 +678,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -604,27 +705,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -649,7 +736,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -665,7 +752,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -676,14 +768,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -693,6 +788,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -746,7 +846,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -762,6 +861,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -776,11 +876,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -790,6 +892,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -798,16 +901,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -819,35 +929,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -863,13 +983,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -878,10 +1001,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -909,11 +1034,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -950,6 +1077,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -958,5 +1086,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index b312b166..4ef8bca 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 17:27:20 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:12:20 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -33,7 +34,9 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -56,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -83,11 +87,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -121,22 +127,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -144,6 +149,8 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -198,6 +232,7 @@
 CONFIG_CANYONLANDS=y
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -241,10 +276,11 @@
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -260,8 +296,7 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
@@ -352,6 +387,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -379,7 +415,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -392,6 +434,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -404,9 +447,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -508,6 +551,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -585,16 +629,18 @@
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -616,6 +662,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -661,6 +708,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -676,6 +724,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -717,11 +766,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -730,10 +774,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -751,6 +791,11 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -774,6 +819,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -800,6 +846,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -811,9 +858,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -831,10 +876,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -842,6 +890,7 @@
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -882,10 +931,12 @@
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
@@ -993,6 +1044,7 @@
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1014,7 +1066,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1038,6 +1092,7 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1045,6 +1100,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1104,7 +1160,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1201,6 +1256,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1218,6 +1274,7 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1236,10 +1293,12 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1263,10 +1322,10 @@
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1288,7 +1347,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index b652f7d..ca17b14 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:20:46 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,9 +78,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,31 +107,40 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -123,6 +152,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,8 +171,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,19 +179,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +234,8 @@
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
@@ -218,10 +278,12 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +299,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +329,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -281,14 +347,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +389,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -338,6 +403,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -350,8 +417,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -364,6 +436,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -376,9 +449,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -453,7 +526,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -469,6 +541,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -481,12 +554,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,7 +584,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -527,6 +609,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -545,7 +629,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -553,6 +640,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -563,9 +651,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -575,6 +667,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -584,14 +677,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -604,6 +696,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -649,6 +742,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -665,6 +759,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -687,27 +786,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -732,7 +817,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -748,7 +833,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -759,14 +849,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -776,6 +869,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -840,7 +938,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -856,6 +953,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -871,11 +969,13 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -885,6 +985,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -893,16 +994,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -914,35 +1022,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -958,13 +1076,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -973,10 +1094,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1004,11 +1127,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1045,6 +1170,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index 007f3bd..e3149ba 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Wed Aug 19 13:06:50 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:33:04 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -34,7 +34,9 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -57,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
@@ -84,11 +87,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -122,22 +127,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -145,6 +149,8 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -170,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -243,10 +276,11 @@
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
 # CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -262,8 +296,7 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
@@ -358,6 +391,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -387,14 +421,11 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -407,6 +438,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -419,9 +451,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -522,6 +554,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -573,8 +606,11 @@
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -611,7 +647,10 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -682,7 +721,9 @@
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -711,12 +752,11 @@
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -730,6 +770,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -775,6 +816,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -791,6 +833,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -831,11 +874,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -844,10 +882,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
@@ -865,7 +899,6 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -883,10 +916,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -894,6 +930,7 @@
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -935,6 +972,7 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -942,6 +980,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1001,7 +1040,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1059,6 +1097,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1095,10 +1134,12 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1122,10 +1163,10 @@
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_PPC_DISABLE_WERROR is not set
 CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
@@ -1147,13 +1188,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1197,11 +1241,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index c23a4ef..dec901f 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:38 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:55:34 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,9 +78,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,8 +103,12 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -94,19 +118,25 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -118,6 +148,13 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -129,8 +166,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,19 +174,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -171,6 +229,8 @@
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -212,10 +272,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -231,10 +293,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -259,6 +324,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -276,14 +342,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -320,6 +384,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -333,6 +398,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -345,8 +412,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -359,6 +431,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -380,6 +453,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -392,12 +466,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -417,7 +496,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -440,6 +523,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -458,7 +543,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -466,6 +554,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -476,9 +565,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -488,6 +581,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -497,14 +591,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -517,6 +610,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -562,6 +656,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -578,13 +673,17 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -601,27 +700,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -646,7 +731,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -662,7 +747,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -673,14 +763,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -690,6 +783,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -743,7 +841,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -759,6 +856,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -773,11 +871,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -787,6 +887,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -795,16 +896,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -816,35 +924,43 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -859,13 +975,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -874,10 +993,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -905,11 +1026,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -946,6 +1069,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -954,5 +1078,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index b25fad1..8fed3b2 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:41 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 14:59:12 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,9 +78,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,8 +107,12 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -98,19 +122,25 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -122,6 +152,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,8 +171,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +179,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -175,6 +234,8 @@
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -216,10 +277,12 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,10 +298,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -263,6 +329,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -280,14 +347,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +389,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -337,6 +403,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,8 +417,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -363,6 +436,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -375,9 +449,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -453,7 +527,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -469,6 +542,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -481,12 +555,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,7 +585,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -533,6 +616,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -543,9 +627,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -555,6 +643,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -564,14 +653,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -584,6 +672,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -629,6 +718,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -645,6 +735,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -667,27 +762,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -712,7 +793,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -728,7 +809,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -739,14 +825,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -756,6 +845,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -820,7 +914,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -836,6 +929,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -851,11 +945,13 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -865,6 +961,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -873,16 +970,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -894,35 +998,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -942,6 +1056,7 @@
 CONFIG_PPC_EARLY_DEBUG_44x=y
 # CONFIG_PPC_EARLY_DEBUG_40x is not set
 # CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
 
@@ -951,13 +1066,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -966,10 +1084,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -997,11 +1117,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1038,6 +1160,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1046,5 +1169,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index ed31d4f..a67ec91 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Feb  4 14:31:09 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:05:05 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +57,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,6 +79,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -78,11 +87,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -93,8 +104,12 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -104,19 +119,25 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -128,6 +149,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -139,8 +168,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -177,6 +232,7 @@
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 CONFIG_REDWOOD=y
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -219,10 +275,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -238,10 +296,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -262,12 +323,15 @@
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -285,14 +349,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +391,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -342,6 +405,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -354,13 +419,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -373,6 +438,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -385,9 +451,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -462,7 +528,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -479,6 +544,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -512,10 +578,6 @@
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -533,23 +595,30 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -558,7 +627,6 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -569,8 +637,12 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_FUSION=y
@@ -586,7 +658,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -614,6 +690,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -632,7 +710,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -640,6 +721,7 @@
 CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -650,19 +732,21 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -676,6 +760,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -721,6 +806,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -737,6 +823,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -777,11 +864,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -790,25 +872,23 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -826,31 +906,21 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -876,7 +946,12 @@
 #
 # DMA Devices
 #
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -887,14 +962,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -904,6 +982,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -958,7 +1041,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -974,6 +1056,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -988,11 +1071,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1002,6 +1087,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1010,16 +1096,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1031,35 +1124,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1075,13 +1178,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1092,10 +1198,12 @@
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=y
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1123,11 +1231,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1164,6 +1274,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1172,5 +1283,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index e14e89a..886cb6a 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:42 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:11:24 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +57,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,9 +79,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,8 +109,12 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -99,19 +123,25 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -123,6 +153,13 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -134,8 +171,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,19 +179,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -176,6 +234,8 @@
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
@@ -218,10 +278,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +299,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -264,6 +329,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -281,14 +347,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +389,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -338,6 +403,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -350,8 +417,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -364,6 +436,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -385,6 +458,7 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -420,10 +494,6 @@
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -440,8 +510,10 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -463,6 +535,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -488,14 +561,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -508,7 +583,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -529,6 +608,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -547,17 +628,19 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -580,6 +663,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -589,6 +673,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -605,25 +690,30 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -639,6 +729,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -676,6 +767,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -691,6 +783,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
@@ -733,11 +826,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -746,27 +834,23 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -784,31 +868,21 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -870,6 +944,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
@@ -899,7 +974,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -912,15 +986,18 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -933,10 +1010,11 @@
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -962,17 +1040,20 @@
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -992,11 +1073,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1038,7 +1119,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1054,6 +1134,7 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1090,9 +1171,11 @@
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1110,15 +1193,22 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1130,6 +1220,7 @@
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1142,10 +1233,13 @@
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1155,6 +1249,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1267,6 +1366,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1281,11 +1381,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1295,27 +1397,29 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1326,7 +1430,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 6400aae..1b2f41d 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Apr  7 17:04:52 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:15:51 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +57,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -72,6 +79,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -79,11 +87,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -121,6 +131,13 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -129,7 +146,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -137,6 +153,13 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +172,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,14 +180,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -186,6 +236,7 @@
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -228,10 +279,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -247,9 +300,8 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -293,11 +345,11 @@
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -339,6 +391,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -353,6 +406,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +419,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -378,6 +438,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -390,9 +451,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -493,6 +554,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -515,6 +577,7 @@
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -534,14 +597,17 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -576,7 +642,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -584,6 +653,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -594,6 +664,9 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -619,12 +692,11 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -637,6 +709,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -682,6 +755,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -698,6 +772,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -720,27 +799,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -783,6 +848,10 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -793,14 +862,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +988,7 @@
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -925,6 +998,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -933,16 +1007,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -954,11 +1035,12 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -968,27 +1050,30 @@
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1004,13 +1089,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1052,11 +1140,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index ef32cc4..12041d3 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:47 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:21:04 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -19,6 +19,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -30,15 +31,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +56,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -70,9 +78,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,8 +107,12 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -98,19 +122,25 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -122,6 +152,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,8 +171,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +179,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -175,6 +234,8 @@
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -216,10 +277,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,10 +298,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -263,6 +329,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -280,14 +347,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +389,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -337,6 +403,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,8 +417,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -363,6 +436,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -375,9 +449,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -453,7 +527,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -469,6 +542,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -481,12 +555,17 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,7 +585,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -529,6 +612,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -547,7 +632,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -555,6 +643,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -565,9 +654,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -577,6 +670,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -586,14 +680,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -606,6 +699,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -651,6 +745,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -667,6 +762,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -689,27 +789,13 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -734,7 +820,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -750,7 +836,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -761,14 +852,17 @@
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -778,6 +872,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -832,7 +931,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -848,6 +946,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -862,11 +961,13 @@
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -876,6 +977,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -884,16 +986,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -905,35 +1014,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -949,13 +1068,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -964,10 +1086,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -995,11 +1119,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1036,6 +1162,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1044,5 +1171,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 787635f..99eff4d 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun  9 23:35:36 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 15:27:46 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +60,13 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -81,11 +87,13 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,7 +119,6 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,6 +131,13 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -131,7 +145,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -139,6 +152,13 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -151,7 +171,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,14 +179,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,6 +234,7 @@
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
 # CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
@@ -229,10 +277,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -248,9 +298,8 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
@@ -356,6 +405,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -371,6 +421,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +434,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -396,6 +453,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -407,9 +465,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -513,6 +571,10 @@
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -524,9 +586,11 @@
 # CONFIG_XILINX_SYSACE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -534,7 +598,9 @@
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -557,15 +623,11 @@
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_WAIT_SCAN is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -582,7 +644,6 @@
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -609,14 +670,14 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +739,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -693,6 +755,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -725,17 +788,17 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -761,10 +824,19 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -787,6 +859,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -812,6 +885,8 @@
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -821,7 +896,6 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
@@ -855,26 +929,15 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -917,10 +980,11 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -988,6 +1052,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1014,7 +1079,8 @@
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
-CONFIG_MMC_PIKASD=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -1025,9 +1091,10 @@
 CONFIG_LEDS_GPIO=y
 # CONFIG_LEDS_GPIO_PLATFORM is not set
 CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1048,6 +1115,10 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1065,10 +1136,13 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1145,7 +1219,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1235,6 +1308,7 @@
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1244,6 +1318,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1261,10 +1336,14 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1276,11 +1355,12 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1290,27 +1370,30 @@
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1326,13 +1409,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_MANAGER is not set
@@ -1366,11 +1452,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 0396ce7..ff9bdb2 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:07 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -166,14 +169,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +219,7 @@
 # CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -243,6 +274,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -259,8 +291,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -273,6 +303,7 @@
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -378,7 +409,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -489,6 +526,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -587,8 +628,8 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -643,6 +684,7 @@
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -688,7 +730,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -735,11 +776,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -797,7 +840,6 @@
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1137,6 +1179,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1180,7 +1223,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index f5c07fd..7b3f4d0 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -86,6 +88,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 CONFIG_FREEZER=y
 
 #
@@ -196,6 +226,7 @@
 # CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -252,6 +283,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +300,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -285,6 +315,7 @@
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -398,7 +429,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -433,6 +470,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -443,6 +484,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -450,6 +492,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -502,7 +545,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -541,6 +586,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -596,15 +642,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -726,8 +773,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -741,6 +790,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -778,6 +828,7 @@
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -836,11 +887,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -849,7 +895,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -884,11 +929,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1129,6 +1176,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1172,7 +1220,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 4f77a1b..eaae2d4 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:22 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:08 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -166,14 +169,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +219,7 @@
 # CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -244,6 +275,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +292,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -274,6 +304,7 @@
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -379,7 +410,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -490,6 +527,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -499,9 +540,11 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -610,8 +653,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -657,6 +699,7 @@
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -700,7 +743,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -745,6 +787,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -805,11 +848,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -881,6 +926,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -902,7 +948,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1172,6 +1220,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1215,7 +1264,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index f9168c1..1742c02 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:25 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:10 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -172,14 +175,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -195,6 +225,7 @@
 # CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -251,6 +282,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +299,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -385,7 +415,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -585,15 +621,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -673,8 +710,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -697,6 +737,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -734,6 +775,7 @@
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -791,11 +833,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -804,7 +841,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -839,11 +875,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -908,7 +946,6 @@
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1011,6 +1048,7 @@
 CONFIG_RTC_DRV_PCF8563=m
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1032,7 +1070,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1243,10 +1283,11 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -1269,7 +1310,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 75c835c..3972438 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:23 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 14:45:09 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +174,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -194,6 +224,7 @@
 # CONFIG_PPC_MEDIA5200 is not set
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_MPC5200_GPIO is not set
+# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -249,6 +280,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -265,8 +297,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -279,6 +309,7 @@
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -384,7 +415,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -496,6 +533,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -607,8 +648,8 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -663,6 +704,7 @@
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -708,7 +750,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -753,6 +794,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -818,11 +860,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -880,7 +924,6 @@
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -984,6 +1027,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1005,7 +1049,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1275,6 +1321,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1318,7 +1365,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 466f09a..baa2bbb 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:14 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -88,6 +90,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -260,6 +290,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -530,6 +556,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -541,6 +571,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -548,6 +579,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -581,7 +613,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -668,8 +700,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -691,6 +726,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -700,6 +736,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -751,6 +788,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -807,11 +845,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,7 +853,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -866,6 +898,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -904,6 +937,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -942,11 +976,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -996,6 +1032,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1101,6 +1138,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1122,7 +1160,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1347,7 +1387,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1374,7 +1414,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 6694fb7..8b1aa80 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:21 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:14 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -89,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -168,14 +171,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -253,6 +283,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -269,8 +300,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -384,7 +413,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -512,6 +547,10 @@
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -581,8 +620,7 @@
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -652,6 +690,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -697,7 +736,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -732,11 +770,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -933,7 +973,7 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -963,7 +1003,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 86df19f..2f2d985 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:22 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:15 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -544,6 +570,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -555,6 +585,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -562,6 +593,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -615,7 +648,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -653,6 +688,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -680,7 +716,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -805,8 +841,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -829,6 +868,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -838,6 +878,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -890,6 +931,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -947,11 +989,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -960,7 +997,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,6 +1011,8 @@
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1022,6 +1060,7 @@
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1062,6 +1101,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1099,6 +1139,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1106,6 +1147,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1173,6 +1216,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1287,15 +1331,17 @@
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
 # CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
@@ -1336,6 +1382,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1365,7 +1412,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1676,7 +1725,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 7bf71d5..633e611 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:23 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:16 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -544,6 +570,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -555,6 +585,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -562,6 +593,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -615,7 +648,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -654,6 +689,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -709,15 +745,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -744,7 +781,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -869,8 +906,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -893,6 +933,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -902,6 +943,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -954,6 +996,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1011,11 +1054,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1024,7 +1062,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1039,6 +1076,8 @@
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1086,6 +1125,7 @@
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1126,6 +1166,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1163,6 +1204,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1170,6 +1212,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1237,6 +1281,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1351,15 +1396,17 @@
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
 # CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
@@ -1400,6 +1447,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1429,7 +1477,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1740,7 +1790,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 7def835..0b4262b 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:17 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -260,6 +290,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -444,6 +470,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -454,6 +484,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -461,6 +492,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -513,7 +545,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -551,6 +585,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -568,7 +603,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -675,8 +710,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -690,6 +727,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -699,6 +737,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -751,6 +790,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -807,11 +847,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,7 +855,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -866,6 +900,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -904,6 +939,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -936,11 +972,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1023,6 +1061,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1044,7 +1083,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1220,7 +1261,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1247,7 +1288,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index b398b9b..155af00 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:24 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:18 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -260,6 +290,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +307,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -445,6 +471,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -456,6 +486,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -463,6 +494,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -474,6 +507,7 @@
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_CB710_CORE is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -516,7 +550,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -554,6 +590,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -571,7 +608,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -680,8 +717,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -704,6 +744,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -713,6 +754,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -766,6 +808,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -825,11 +868,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -838,7 +876,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -852,6 +889,8 @@
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -899,6 +938,7 @@
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -939,6 +979,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -976,6 +1017,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -983,6 +1025,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1050,6 +1094,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1387,7 +1432,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1414,7 +1459,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index f67317e..ff45f49 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:25 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:19 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -528,6 +554,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -539,6 +569,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -546,6 +577,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -647,7 +680,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -686,6 +721,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -741,15 +777,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
@@ -777,7 +814,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -860,8 +897,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -884,6 +924,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -925,6 +966,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -982,11 +1024,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -995,7 +1032,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1009,6 +1045,8 @@
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1062,6 +1100,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1069,6 +1108,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1117,6 +1158,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1235,6 +1277,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1264,7 +1307,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1485,7 +1530,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1512,7 +1557,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index a668110..28d8ff3 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:26 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:20 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -528,6 +554,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -539,6 +569,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -546,6 +577,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -599,7 +632,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -637,6 +672,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -654,7 +690,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -737,8 +773,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +800,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -802,6 +842,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -859,11 +900,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -872,7 +908,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -886,6 +921,8 @@
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -939,6 +976,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -946,6 +984,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -994,6 +1034,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1112,6 +1153,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1141,7 +1183,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1362,7 +1406,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1389,7 +1433,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index c4e92ba..6252ab5 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:27 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:21 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -443,6 +469,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -453,6 +483,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -460,6 +491,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -493,7 +525,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -616,8 +648,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -630,6 +664,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -639,6 +674,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -690,6 +726,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -745,11 +782,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -758,7 +790,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -804,6 +835,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -842,6 +874,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -874,11 +907,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -961,6 +996,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -982,7 +1018,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1156,7 +1194,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1183,7 +1221,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 4f434b1..7822737 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:28 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:21 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +176,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -258,6 +288,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -274,8 +305,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -402,9 +431,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -525,6 +551,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -535,6 +565,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -542,6 +573,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -594,7 +626,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -632,6 +666,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -649,7 +684,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -756,8 +791,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -771,6 +808,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -780,6 +818,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -832,6 +871,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -888,11 +928,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -901,7 +936,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -947,6 +981,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -985,6 +1020,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1017,11 +1053,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1104,6 +1142,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1125,7 +1164,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1302,7 +1343,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1329,7 +1370,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index b52ec08..9451d6e 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:23 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -88,6 +90,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -258,6 +288,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -274,8 +305,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,9 +433,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -539,6 +565,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -549,6 +579,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -556,6 +587,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -590,7 +623,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -657,8 +690,10 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -671,6 +706,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -680,6 +716,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -737,6 +774,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -795,11 +833,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -808,7 +841,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -823,6 +855,8 @@
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_GPIO is not set
 # CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -854,6 +888,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -903,6 +938,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -910,6 +946,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1199,7 +1237,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1230,6 +1268,7 @@
 # CONFIG_PPC_EARLY_DEBUG_44x is not set
 # CONFIG_PPC_EARLY_DEBUG_40x is not set
 # CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
 
 #
 # Security options
@@ -1237,7 +1276,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 7300615..f67b70d 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:29 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:22 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -443,6 +469,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -453,6 +483,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -460,6 +491,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -512,7 +544,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -551,6 +585,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -606,15 +641,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -631,7 +667,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -736,8 +772,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -751,6 +789,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -760,6 +799,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -811,6 +851,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -868,11 +909,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -881,7 +917,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -927,6 +962,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -965,6 +1001,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -997,11 +1034,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1226,7 +1265,7 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1253,7 +1292,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 9e9158a..a84fd11 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:30 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:24 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +177,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -398,9 +427,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -438,6 +464,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -449,6 +479,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -456,6 +487,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -507,7 +539,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -546,6 +580,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -601,15 +636,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -638,7 +674,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -725,8 +761,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -749,6 +788,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -758,6 +798,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -809,6 +850,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -867,11 +909,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -880,7 +917,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -926,6 +962,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -964,6 +1001,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1001,11 +1039,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1097,6 +1137,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1385,7 +1426,7 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1412,7 +1453,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_XOR_BLOCKS=y
 CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 6b39915..72c2067 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:31 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:25 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -172,14 +175,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -257,6 +287,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +304,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -401,9 +430,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -524,6 +550,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -535,6 +565,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -542,6 +573,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -604,7 +636,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -691,8 +723,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -715,6 +750,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -724,6 +760,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -775,6 +812,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -833,11 +871,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -846,7 +879,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -892,6 +924,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -930,6 +963,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -967,11 +1001,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1039,6 +1075,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1321,7 +1358,7 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1348,7 +1385,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index a5bde8d..21dad38 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:32 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:26 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,7 +216,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -248,6 +280,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +297,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -385,9 +416,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -503,6 +531,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -603,8 +635,7 @@
 # CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -624,6 +655,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -669,6 +701,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1051,7 +1084,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index c10e26f..5db54cd 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:33 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:27 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -170,14 +174,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,7 +217,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 CONFIG_MPC8540_ADS=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -205,6 +236,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -249,6 +281,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -265,8 +298,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -386,9 +417,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -423,6 +451,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -500,8 +532,7 @@
 # CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -521,6 +552,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -570,6 +602,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -920,7 +953,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 8d9f0a4..76c7018 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:34 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:28 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,14 +177,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,7 +220,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
@@ -208,6 +239,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -252,6 +284,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -398,9 +429,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -440,6 +468,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -485,7 +517,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -594,8 +626,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +642,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -617,6 +652,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -664,6 +700,7 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -705,6 +742,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1054,7 +1092,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 9b63e25..fab8ada 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:35 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:29 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,7 +218,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
@@ -206,6 +237,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -250,6 +282,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -266,8 +299,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -396,9 +427,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -437,6 +465,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -537,7 +569,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -642,8 +674,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -656,6 +690,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -665,6 +700,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -717,6 +753,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1079,7 +1116,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 1b23568..8290385 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:36 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:29 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,7 +216,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
 # CONFIG_TQM8560 is not set
 CONFIG_SBC8548=y
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -247,6 +279,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -263,8 +296,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -392,9 +423,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -431,6 +459,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -476,7 +508,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -581,8 +613,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -595,6 +629,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -604,6 +639,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -656,6 +692,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -889,7 +926,7 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -915,7 +952,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 959d028..2499b5b 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:30 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,7 +216,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 CONFIG_SBC8560=y
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -247,6 +279,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -263,8 +296,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -384,9 +415,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -421,6 +449,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -498,8 +530,7 @@
 # CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -519,6 +550,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -568,6 +600,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -702,7 +735,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -948,6 +983,7 @@
 # CONFIG_PPC_EARLY_DEBUG_44x is not set
 # CONFIG_PPC_EARLY_DEBUG_40x is not set
 # CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
 
 #
 # Security options
@@ -955,7 +991,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 7f5ec35..e2edb79 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:37 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:31 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -174,14 +178,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,7 +221,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -209,6 +240,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -252,6 +284,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,9 +435,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -540,6 +568,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -551,6 +583,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -558,6 +591,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -621,7 +656,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -710,8 +745,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -734,6 +772,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -743,6 +782,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -768,6 +808,7 @@
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -826,6 +867,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -883,11 +925,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -896,7 +933,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,6 +946,8 @@
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_MPC8xxx is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -957,6 +995,7 @@
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -997,6 +1036,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1015,6 +1055,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1022,6 +1063,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1192,6 +1235,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1318,6 +1362,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1347,7 +1392,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1574,7 +1621,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1600,7 +1647,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index c8327e8..ce31325 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:38 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:32 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -178,14 +182,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -194,7 +225,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -213,6 +244,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -257,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -463,9 +494,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -513,6 +541,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -523,6 +555,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -530,6 +563,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -633,7 +667,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -673,6 +709,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -690,7 +727,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -797,8 +834,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,6 +852,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -822,6 +862,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -881,6 +922,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -905,6 +947,7 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -970,11 +1013,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -983,7 +1021,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1016,6 +1053,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1058,6 +1096,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1097,6 +1136,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1115,7 +1155,6 @@
 # CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -1465,7 +1504,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 82563703..0824b46 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:39 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:33 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -169,14 +173,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,7 +216,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -204,6 +235,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -248,6 +280,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +297,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -391,9 +422,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -510,6 +538,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -520,6 +552,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -527,6 +560,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -615,7 +649,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -738,8 +772,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -752,6 +788,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -761,6 +798,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -813,6 +851,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -871,11 +910,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -883,7 +917,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -929,6 +962,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -967,6 +1001,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -985,11 +1020,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1220,7 +1257,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1246,7 +1283,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 91d85d73..2137be4 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:40 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:34 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,7 +218,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -251,6 +283,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -514,6 +542,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -619,7 +653,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -766,6 +803,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -820,6 +858,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -967,6 +1001,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1260,7 +1298,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index debe268..5cc89aa 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:41 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:35 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -177,14 +181,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -193,7 +224,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -212,6 +243,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -257,6 +289,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -273,8 +306,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -406,7 +437,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -535,6 +572,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -545,6 +586,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -552,6 +594,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -585,7 +628,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -690,8 +733,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -704,6 +749,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -713,6 +759,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -765,6 +812,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -820,11 +868,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -833,7 +876,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -879,6 +921,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -917,6 +960,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -935,11 +979,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1003,6 +1049,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1024,7 +1071,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1280,7 +1329,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 7451550..e7b9148 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:42 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:36 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,7 +218,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -251,6 +283,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -514,6 +542,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -619,7 +653,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -766,6 +803,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -820,6 +858,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -967,6 +1001,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1260,7 +1298,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 631d92b..a998e40 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:43 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:36 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -89,6 +92,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -171,14 +175,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,7 +218,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -206,6 +237,7 @@
 CONFIG_TQM8560=y
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -251,6 +283,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -267,8 +300,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -514,6 +542,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -524,6 +556,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -531,6 +564,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -619,7 +653,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -743,8 +777,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -757,6 +793,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -766,6 +803,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -820,6 +858,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -881,11 +920,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -893,7 +927,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -925,6 +958,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -967,6 +1001,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1006,6 +1041,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1025,11 +1061,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1260,7 +1298,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1286,7 +1324,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 52acbac..fc656af 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:44 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:37 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -40,6 +40,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -63,6 +64,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -93,6 +96,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 CONFIG_PPC_MSI_BITMAP=y
 
@@ -198,7 +229,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -217,6 +248,7 @@
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -261,6 +293,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -277,8 +310,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -404,6 +435,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -441,7 +473,13 @@
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -576,6 +614,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -587,6 +629,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -594,6 +637,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -646,7 +690,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -685,6 +731,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -740,15 +787,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -765,7 +813,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -852,8 +900,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -876,6 +927,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -885,6 +937,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -914,6 +967,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -950,6 +1004,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1007,11 +1062,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1020,7 +1070,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1053,6 +1102,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1095,6 +1145,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1134,6 +1185,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1172,11 +1224,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1368,6 +1422,7 @@
 # CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=y
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1391,7 +1446,6 @@
 #
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1420,6 +1474,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1441,7 +1496,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1772,7 +1829,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 6cd2cd6..a85f927 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:49 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:43 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +290,7 @@
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +307,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -314,7 +344,6 @@
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
 # CONFIG_PCMCIA_IOCTL is not set
@@ -414,6 +443,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -451,7 +481,13 @@
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -570,6 +606,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -581,6 +621,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -588,6 +629,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
 # CONFIG_C2PORT is not set
 
 #
@@ -689,7 +731,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -728,6 +772,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
@@ -785,15 +830,16 @@
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -810,7 +856,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -897,8 +943,14 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -937,6 +989,7 @@
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -946,6 +999,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -1005,6 +1059,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1070,11 +1125,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1083,7 +1133,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_DS1682=y
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1115,6 +1164,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1157,6 +1207,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1196,6 +1247,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1235,11 +1287,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1338,6 +1392,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1464,6 +1519,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
@@ -1485,7 +1541,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1710,7 +1768,7 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1737,7 +1795,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a6a3768..eb58dec 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:47 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:41 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +185,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -259,6 +290,7 @@
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -275,8 +307,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -314,7 +344,6 @@
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
 # CONFIG_PCMCIA_IOCTL is not set
@@ -414,6 +443,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -451,7 +481,13 @@
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -570,6 +606,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -581,6 +621,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -588,6 +629,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
 # CONFIG_C2PORT is not set
 
 #
@@ -689,7 +731,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -728,6 +772,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
@@ -753,7 +798,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -840,8 +885,14 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -880,6 +931,7 @@
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -889,6 +941,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -948,6 +1001,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1013,11 +1067,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1026,7 +1075,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_DS1682=y
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1058,6 +1106,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1100,6 +1149,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1139,6 +1189,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1178,11 +1229,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1281,6 +1334,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1407,6 +1461,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
@@ -1428,7 +1483,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1653,7 +1710,7 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1680,7 +1737,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 1975d41..4554d9b 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:48 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:42 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -182,14 +186,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -260,6 +291,7 @@
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +308,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -400,6 +430,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -588,9 +619,6 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -719,6 +747,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -730,6 +762,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -737,6 +770,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+CONFIG_DS1682=y
 # CONFIG_C2PORT is not set
 
 #
@@ -789,7 +823,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -828,6 +864,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -883,15 +920,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -908,7 +946,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -995,8 +1033,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1050,6 +1091,7 @@
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -1059,6 +1101,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -1117,6 +1160,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1174,11 +1218,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1187,7 +1226,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_DS1682=y
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1220,6 +1258,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1262,6 +1301,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1301,6 +1341,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1340,11 +1381,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1443,6 +1486,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1570,6 +1614,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
@@ -1591,7 +1636,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1891,9 +1938,12 @@
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index de4d525..aab3bae 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:39 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -176,14 +180,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -254,6 +285,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -270,8 +302,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -382,6 +412,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -420,9 +451,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -555,6 +583,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -565,6 +597,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -572,6 +605,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -671,7 +705,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -710,6 +746,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -765,15 +802,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -790,7 +828,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -838,8 +876,10 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -853,6 +893,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -862,6 +903,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -891,6 +933,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -927,6 +970,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -981,11 +1025,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -994,7 +1033,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1029,11 +1067,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1163,6 +1203,7 @@
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
 # CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
@@ -1282,6 +1323,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1303,7 +1345,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1606,7 +1650,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 754a79b..727a8c8 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:46 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:40 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -90,6 +93,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -182,14 +186,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -260,6 +291,7 @@
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +308,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -395,6 +425,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -439,9 +470,6 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -483,6 +511,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -494,6 +526,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -501,6 +534,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -554,7 +588,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -593,6 +629,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -648,15 +685,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -673,7 +711,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -778,8 +816,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -802,6 +843,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -811,6 +853,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -840,6 +883,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -876,6 +920,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -932,11 +977,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -945,7 +985,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -980,11 +1019,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1059,6 +1100,7 @@
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
 # CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
@@ -1186,6 +1228,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1312,6 +1355,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1333,7 +1377,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1648,7 +1694,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 89991f1..4fb04dd 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:45 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:38 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -90,6 +93,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -162,6 +166,7 @@
 #
 # CONFIG_GCOV_KERNEL is not set
 CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -182,14 +187,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -260,6 +292,7 @@
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -276,8 +309,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -399,6 +430,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -587,9 +619,6 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -717,6 +746,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -727,6 +760,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -734,6 +768,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -786,7 +821,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -873,8 +908,10 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -918,6 +955,7 @@
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -927,6 +965,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -985,6 +1024,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1042,11 +1082,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1055,7 +1090,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1101,6 +1135,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1139,6 +1174,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1171,11 +1207,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1281,7 +1319,6 @@
 CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_FS_POSIX_ACL is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -1556,8 +1593,12 @@
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 052cf13..5c1dc76 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:04 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:23:58 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -55,6 +56,7 @@
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -82,6 +84,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -161,14 +164,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -242,6 +272,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -258,8 +289,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -373,9 +402,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -546,8 +572,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -567,6 +592,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -615,6 +641,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -637,6 +664,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -898,6 +926,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -943,7 +972,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 0fb65a8..72137cd 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:05 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:23:59 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -92,6 +94,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -173,6 +176,7 @@
 #
 # CONFIG_GCOV_KERNEL is not set
 CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -192,14 +196,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -224,6 +255,8 @@
 # CONFIG_PPC_PRPMC2800 is not set
 CONFIG_PPC_C2K=y
 CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
 # CONFIG_AMIGAONE is not set
 CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
@@ -286,6 +319,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -296,14 +330,12 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -316,6 +348,7 @@
 CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -424,6 +457,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -687,10 +721,6 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 
 #
@@ -773,7 +803,6 @@
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_PCI is not set
-# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -817,6 +846,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -870,7 +903,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
+# CONFIG_SCSI_HPSA is not set
 CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_3W_SAS is not set
 CONFIG_SCSI_ACARD=m
 CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
@@ -925,6 +960,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -942,7 +978,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -1027,8 +1063,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1054,6 +1093,7 @@
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -1063,6 +1103,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -1121,8 +1162,6 @@
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
 # CONFIG_NOZOMI is not set
 
@@ -1140,6 +1179,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1200,11 +1240,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1213,7 +1248,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1259,6 +1293,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 CONFIG_SENSORS_IT87=m
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM77=m
 CONFIG_SENSORS_LM78=m
@@ -1297,6 +1332,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 CONFIG_SENSORS_W83627HF=m
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1333,7 +1369,6 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -1392,6 +1427,7 @@
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1923,7 +1959,6 @@
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_LSM_MMAP_MIN_ADDR=65536
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
@@ -1934,6 +1969,11 @@
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_SELINUX=y
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_DAC is not set
+CONFIG_DEFAULT_SECURITY="selinux"
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ef5edc7..7910541 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:06 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:23:59 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -160,14 +163,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -237,6 +267,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -249,8 +280,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -400,9 +429,6 @@
 # CONFIG_BT is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -523,6 +549,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
@@ -553,7 +583,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -658,8 +688,9 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -670,6 +701,7 @@
 # CONFIG_SLIP is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -705,6 +737,7 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -741,6 +774,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1061,7 +1095,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 73ef9be..58f7ca7 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:07 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:00 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -54,6 +55,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -81,6 +83,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -159,14 +162,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -241,6 +271,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -257,8 +288,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -372,9 +401,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -545,8 +571,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -591,6 +616,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -851,6 +877,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -893,7 +920,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 63c3e8d..9a0c981 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:08 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:01 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -86,6 +88,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -181,14 +184,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -215,6 +245,8 @@
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
 # CONFIG_AMIGAONE is not set
 CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
@@ -261,6 +293,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -277,8 +310,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -517,10 +548,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 
 #
@@ -650,6 +677,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -661,6 +692,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -668,6 +700,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -720,7 +753,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -759,6 +794,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -814,15 +850,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 CONFIG_PATA_SIL680=y
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -839,7 +876,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -934,8 +971,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -960,6 +1000,7 @@
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -969,6 +1010,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -1007,6 +1049,7 @@
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -1039,6 +1082,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1096,11 +1140,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1109,7 +1148,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1155,6 +1193,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1193,6 +1232,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1211,11 +1251,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1281,6 +1323,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1454,6 +1497,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1475,7 +1519,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1786,7 +1832,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 520b04a..4c2c877 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:09 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:02 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,7 +60,6 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -168,14 +169,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -208,7 +236,8 @@
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_PPC_RTAS_DAEMON=y
 CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_PPC_MPC106=y
@@ -250,6 +279,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -262,8 +292,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -395,9 +423,6 @@
 # CONFIG_BT is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -525,6 +550,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -558,7 +587,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -625,8 +654,9 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -637,6 +667,7 @@
 # CONFIG_SLIP is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -673,6 +704,7 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -734,11 +766,6 @@
 # CONFIG_I2C_PARPORT_LIGHT is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -775,6 +802,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -807,11 +835,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1118,7 +1148,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 43c3c4f..9e090f2 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:03 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -53,6 +54,7 @@
 CONFIG_AUDIT_ARCH=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -80,6 +82,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -162,14 +165,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -244,6 +274,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +291,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -379,9 +408,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -497,6 +523,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -568,8 +598,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -614,6 +643,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -863,6 +893,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -887,7 +918,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 523d5fe..61cf73d 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Thu Oct 15 10:33:21 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Dec 30 15:08:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -87,6 +89,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -170,14 +173,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 CONFIG_FREEZER=y
 
 #
@@ -193,6 +223,7 @@
 CONFIG_PPC_MEDIA5200=y
 CONFIG_PPC_MPC5200_BUGFIX=y
 CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_MPC5200_LPBFIFO=m
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -211,6 +242,7 @@
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
+# CONFIG_PPC_RTAS_DAEMON is not set
 CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
 # CONFIG_PPC_MPC106 is not set
@@ -223,6 +255,7 @@
 CONFIG_PPC_BESTCOMM=y
 CONFIG_PPC_BESTCOMM_ATA=y
 CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_PPC_BESTCOMM_GEN_BD=m
 CONFIG_SIMPLE_GPIO=y
 
 #
@@ -253,6 +286,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -269,8 +303,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -286,6 +318,7 @@
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
 # CONFIG_PM_RUNTIME is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -399,7 +432,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -530,6 +569,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -541,6 +584,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -548,6 +592,8 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -600,7 +646,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -639,6 +687,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -694,15 +743,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
@@ -785,8 +835,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -809,6 +862,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -818,6 +872,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -874,6 +929,7 @@
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -934,11 +990,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -947,7 +998,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -962,7 +1012,10 @@
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_MPC52xx is not set
 CONFIG_SPI_MPC52xx_PSC=m
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -995,6 +1048,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1042,6 +1096,7 @@
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1083,6 +1138,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1122,6 +1178,7 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1129,6 +1186,8 @@
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1322,7 +1381,6 @@
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1440,6 +1498,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1469,7 +1528,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1731,6 +1792,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -1774,7 +1836,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index d8b364a..1315b77 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:10 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:04 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -167,14 +170,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +229,8 @@
 # CONFIG_PPC_PRPMC2800 is not set
 # CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
 # CONFIG_AMIGAONE is not set
 CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
@@ -244,6 +276,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -260,8 +293,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -385,9 +416,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -424,6 +452,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -487,7 +519,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -526,6 +560,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -580,15 +615,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -605,7 +641,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -731,8 +767,10 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -746,6 +784,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -755,6 +794,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -806,6 +846,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1091,7 +1132,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1118,7 +1159,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 00fad81..9073778 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:11 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:05 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -161,14 +164,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -240,6 +270,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -252,8 +283,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -403,9 +432,6 @@
 # CONFIG_BT is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -526,6 +552,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
@@ -556,7 +586,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -661,8 +691,9 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -679,6 +710,7 @@
 CONFIG_SLHC=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -688,6 +720,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -740,6 +773,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -763,6 +797,7 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -799,6 +834,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1131,7 +1167,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 64dff21..05bec48 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:12 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:06 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -37,6 +37,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,7 @@
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_REDBOOT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
@@ -89,6 +91,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -176,14 +179,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -266,6 +296,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -282,8 +313,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -413,9 +442,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -548,6 +574,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -559,6 +589,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -566,6 +597,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -618,7 +650,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -657,6 +691,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -712,15 +747,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -737,7 +773,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -844,8 +880,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -868,6 +907,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -877,6 +917,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -929,6 +970,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -989,11 +1031,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1002,7 +1039,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1034,6 +1070,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1076,6 +1113,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1115,6 +1153,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1153,11 +1192,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1249,6 +1290,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1542,7 +1584,7 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1569,7 +1611,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index a12e7ba..8f35f80 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:25:20 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:06 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -39,6 +39,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -62,6 +63,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -92,6 +95,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -184,14 +188,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC_MSI_BITMAP=y
 
@@ -201,7 +232,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -220,6 +251,7 @@
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -267,6 +299,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -283,8 +316,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -405,6 +436,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -449,9 +481,6 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -494,6 +523,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -505,6 +538,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -512,6 +546,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -565,7 +600,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -604,6 +641,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -659,15 +697,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -684,7 +723,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -795,8 +834,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -820,6 +862,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -829,6 +872,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -858,6 +902,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -896,6 +941,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -956,11 +1002,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -969,7 +1010,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1002,6 +1042,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1035,11 +1076,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1114,6 +1157,7 @@
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
 # CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
@@ -1241,6 +1285,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1347,7 +1392,6 @@
 #
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1376,6 +1420,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1397,7 +1442,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1731,7 +1778,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index cd70b4a..8755ea3 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:26:01 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:07 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -16,9 +16,9 @@
 # CONFIG_E200 is not set
 CONFIG_E500=y
 # CONFIG_PPC_E500MC is not set
+CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
@@ -40,6 +40,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -63,6 +64,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -93,6 +96,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -187,14 +191,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 CONFIG_PPC_MSI_BITMAP=y
 
@@ -204,7 +235,7 @@
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
+CONFIG_FSL_SOC_BOOKE=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -223,6 +254,7 @@
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
 # CONFIG_SBC8560 is not set
+# CONFIG_P4080_DS is not set
 CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -271,6 +303,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -287,8 +320,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -409,6 +440,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -453,9 +485,6 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -498,6 +527,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -509,6 +542,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -516,6 +550,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -569,7 +604,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -608,6 +645,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -663,15 +701,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -688,7 +727,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -799,8 +838,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -824,6 +866,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -833,6 +876,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -862,6 +906,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -900,6 +945,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -960,11 +1006,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -973,7 +1014,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1006,6 +1046,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1039,11 +1080,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1118,6 +1161,7 @@
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
 # CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
@@ -1245,6 +1289,7 @@
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1351,7 +1396,6 @@
 #
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1380,6 +1424,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1401,7 +1446,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1735,7 +1782,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 40d6f05..3f6b11b 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:15 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:08 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -53,6 +54,7 @@
 CONFIG_AUDIT_ARCH=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -80,6 +82,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -158,14 +161,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -240,6 +270,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -256,8 +287,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -375,9 +404,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -407,6 +433,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -485,8 +515,7 @@
 # CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -506,6 +535,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -554,6 +584,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -576,6 +607,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -855,6 +887,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
@@ -876,7 +909,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5b3abb4..41884c9 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:16 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:09 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -61,6 +62,8 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -91,6 +94,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -183,14 +187,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -221,7 +252,7 @@
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 # CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
@@ -262,6 +293,7 @@
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -278,8 +310,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -397,6 +427,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=y
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -441,9 +472,6 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -486,6 +514,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -497,6 +529,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -504,6 +537,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -557,7 +591,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -596,6 +632,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -651,15 +688,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -676,7 +714,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -781,8 +819,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -805,6 +846,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -814,6 +856,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -843,6 +886,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -879,6 +923,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -936,11 +981,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -949,7 +989,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -982,6 +1021,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1015,11 +1055,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1094,6 +1136,7 @@
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
 # CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
@@ -1221,6 +1264,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1348,6 +1392,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1369,7 +1414,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1684,7 +1731,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 1da3488..6b9e6bd 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:10 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -54,6 +55,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -81,6 +83,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -159,14 +162,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -248,6 +278,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -264,8 +295,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -379,9 +408,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -556,8 +582,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -602,6 +627,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -862,6 +888,7 @@
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
@@ -904,7 +931,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 326205c..35b6068 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:44:03 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 13:54:06 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -16,6 +16,7 @@
 # CONFIG_E200 is not set
 CONFIG_4xx=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -27,15 +28,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -50,11 +54,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,9 +76,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -85,31 +105,40 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -121,6 +150,14 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -132,8 +169,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,19 +177,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -168,12 +226,14 @@
 CONFIG_ACADIA=y
 CONFIG_EP405=y
 CONFIG_HCU4=y
+CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
 CONFIG_WALNUT=y
 CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
 CONFIG_PPC40x_SIMPLE=y
 CONFIG_405GP=y
+CONFIG_405EP=y
 CONFIG_405EX=y
 CONFIG_405EZ=y
 CONFIG_405GPR=y
@@ -195,6 +255,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
 # CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
 
 #
 # Kernel options
@@ -218,10 +279,12 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,10 +300,12 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +330,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,14 +348,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -341,6 +405,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -349,6 +414,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -362,6 +428,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -374,13 +442,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -393,6 +461,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -405,9 +474,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -483,7 +552,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -491,7 +559,7 @@
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
 
 #
 # UBI debugging options
@@ -509,6 +577,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -520,14 +589,25 @@
 CONFIG_XILINX_SYSACE=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -547,7 +627,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -568,6 +652,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -586,7 +672,10 @@
 CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -594,6 +683,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -604,9 +694,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -616,6 +710,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -625,14 +720,13 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -645,6 +739,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -663,6 +758,7 @@
 # CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -697,6 +793,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -714,6 +811,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=m
@@ -756,11 +854,6 @@
 # CONFIG_I2C_TAOS_EVM is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -769,20 +862,17 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -804,11 +894,17 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -832,28 +928,15 @@
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -909,6 +992,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -930,7 +1014,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -946,7 +1030,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -956,6 +1045,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -966,11 +1056,13 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -980,6 +1072,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1053,7 +1150,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1108,6 +1204,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1125,11 +1222,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1139,6 +1238,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1147,16 +1247,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1168,35 +1275,45 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1212,13 +1329,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1227,10 +1347,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1258,11 +1380,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1299,6 +1423,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1307,5 +1432,6 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 5e6d55f..46f5c47 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 08:43:46 2009
+# Linux kernel version: 2.6.33-rc1
+# Mon Jan  4 13:42:17 2010
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -20,6 +20,7 @@
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -31,15 +32,18 @@
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,11 +58,15 @@
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -72,9 +80,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,31 +109,40 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -125,6 +154,13 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -136,8 +172,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,20 +180,42 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -179,8 +236,11 @@
 CONFIG_ARCHES=y
 CONFIG_CANYONLANDS=y
 CONFIG_GLACIER=y
+CONFIG_REDWOOD=y
+CONFIG_EIGER=y
 CONFIG_YOSEMITE=y
 CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_XILINX_ML510 is not set
 CONFIG_PPC44x_SIMPLE=y
 CONFIG_PPC4xx_GPIO=y
 CONFIG_440EP=y
@@ -190,6 +250,7 @@
 CONFIG_440GX=y
 CONFIG_440SPe=y
 CONFIG_460EX=y
+CONFIG_460SX=y
 CONFIG_IBM440EP_ERR42=y
 CONFIG_XILINX_VIRTEX=y
 CONFIG_XILINX_VIRTEX_5_FXT=y
@@ -207,6 +268,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
 # CONFIG_SIMPLE_GPIO is not set
+# CONFIG_XILINX_PCI is not set
 
 #
 # Kernel options
@@ -230,10 +292,12 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -249,10 +313,13 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -276,6 +343,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -293,14 +361,12 @@
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -352,6 +418,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -360,6 +427,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -375,6 +443,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -387,8 +457,13 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -401,6 +476,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -413,9 +489,9 @@
 CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -490,7 +566,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -498,7 +573,7 @@
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_GLUEBI=m
 
 #
 # UBI debugging options
@@ -516,6 +591,7 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -528,14 +604,25 @@
 CONFIG_XILINX_SYSACE=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -558,10 +645,6 @@
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -578,6 +661,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -587,7 +671,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -608,6 +696,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -626,7 +716,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -634,6 +727,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -644,9 +738,13 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -656,6 +754,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -665,14 +764,14 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -695,6 +794,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -713,6 +813,7 @@
 # CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -747,6 +848,7 @@
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -764,6 +866,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=m
@@ -807,11 +910,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -820,20 +918,17 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -855,16 +950,21 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -884,28 +984,15 @@
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -961,6 +1048,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -994,19 +1082,22 @@
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 # CONFIG_USB_OHCI_HCD_PCI is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1030,11 +1121,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1075,7 +1166,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1083,6 +1173,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1091,6 +1182,7 @@
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1100,7 +1192,12 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1110,6 +1207,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1119,11 +1217,13 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1133,6 +1233,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1206,7 +1311,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1261,6 +1365,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1278,11 +1383,13 @@
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1292,6 +1399,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1300,16 +1408,23 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1321,35 +1436,43 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1363,13 +1486,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1378,10 +1504,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1409,11 +1537,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1450,6 +1580,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
 
 #
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index b791121..5d06f2c 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:11 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -59,6 +60,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -165,14 +168,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -243,6 +273,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -255,8 +286,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -407,9 +436,6 @@
 # CONFIG_BT is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -530,6 +556,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
@@ -616,7 +646,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -721,8 +751,9 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -739,6 +770,7 @@
 CONFIG_SLHC=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -748,6 +780,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -802,6 +835,7 @@
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -825,6 +859,7 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -861,6 +896,7 @@
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -955,10 +991,12 @@
 # CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
@@ -1248,7 +1286,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index ef50ce4..57ab574 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:18 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:12 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -38,6 +38,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -60,6 +61,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -88,6 +90,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -175,14 +178,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -207,6 +237,8 @@
 CONFIG_PPC_PRPMC2800=y
 # CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
 # CONFIG_AMIGAONE is not set
 CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
@@ -252,6 +284,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -268,8 +301,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -394,9 +425,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -518,6 +546,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -529,6 +561,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -536,6 +569,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -641,7 +675,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -680,6 +716,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -734,15 +771,16 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -759,7 +797,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -886,8 +924,11 @@
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -910,6 +951,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -919,6 +961,7 @@
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -973,6 +1016,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -1030,11 +1074,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1042,7 +1081,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1088,6 +1126,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1126,6 +1165,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1144,11 +1184,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1250,6 +1292,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1362,6 +1405,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1383,7 +1427,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1626,7 +1672,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 5242631..f2f8321 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 08:20:19 2009
+# Linux kernel version: 2.6.33-rc3
+# Wed Jan  6 09:24:13 2010
 #
 # CONFIG_PPC64 is not set
 
@@ -36,6 +36,7 @@
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -58,6 +59,7 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
@@ -85,6 +87,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -167,14 +170,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -201,6 +231,8 @@
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_GAMECUBE is not set
+# CONFIG_WII is not set
 # CONFIG_AMIGAONE is not set
 CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
@@ -246,6 +278,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
 CONFIG_MAX_ACTIVE_REGIONS=32
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -262,8 +295,6 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
@@ -384,9 +415,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -507,6 +535,10 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -515,6 +547,7 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -522,6 +555,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -628,7 +662,9 @@
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -666,6 +702,7 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -695,7 +732,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -741,8 +778,11 @@
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_AIRO is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -765,6 +805,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -805,6 +846,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -862,11 +904,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -875,7 +912,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -910,11 +946,13 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -963,6 +1001,7 @@
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_XPS_USB_HCD_XILINX is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_OXU210HP_HCD is not set
@@ -1087,6 +1126,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1108,7 +1148,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1322,7 +1364,7 @@
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
@@ -1349,7 +1391,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_XOR_BLOCKS=y
 CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 17828ad..c376eda 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -235,14 +235,10 @@
 #ifdef __powerpc64__
 # define SET_PERSONALITY(ex)					\
 do {								\
-	unsigned long new_flags = 0;				\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
-		new_flags = _TIF_32BIT;				\
-	if ((current_thread_info()->flags & _TIF_32BIT)		\
-	    != new_flags)					\
-		set_thread_flag(TIF_ABI_PENDING);		\
+		set_thread_flag(TIF_32BIT);			\
 	else							\
-		clear_thread_flag(TIF_ABI_PENDING);		\
+		clear_thread_flag(TIF_32BIT);			\
 	if (personality(current->personality) != PER_LINUX32)	\
 		set_personality(PER_LINUX |			\
 			(current->personality & (~PER_MASK)));	\
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index c8b3292..aa9d383 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -111,7 +111,6 @@
 #define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
 #define TIF_FREEZE		14	/* Freezing for suspend */
 #define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
-#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -129,7 +128,6 @@
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 #define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
-#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
 #define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
 
 #define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 22f738d..bbf8970 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -17,7 +17,9 @@
 
 #define parent_node(node)	(node)
 
-#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
+#define cpumask_of_node(node) ((node) == -1 ?				\
+			       cpu_all_mask :				\
+			       &numa_cpumask_lookup_table[node])
 
 int of_node_to_nid(struct device_node *device);
 
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 678f98c..3ef743f 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -542,11 +542,11 @@
 FixupDAR:/* Entry point for dcbx workaround. */
 	/* fetch instruction from memory. */
 	mfspr	r10, SPRN_SRR0
+	andis.	r11, r10, 0x8000	/* Address >= 0x80000000 */
 	DO_8xx_CPU6(0x3780, r3)
 	mtspr	SPRN_MD_EPN, r10
 	mfspr	r11, SPRN_M_TWB	/* Get level 1 table entry address */
-	cmplwi	cr0, r11, 0x0800
-	blt-	3f		/* Branch if user space */
+	beq-	3f		/* Branch if user space */
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@h
 	ori	r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l
 	rlwimi	r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */
@@ -768,12 +768,12 @@
  */
 initial_mmu:
 	tlbia			/* Invalidate all TLB entries */
-#ifdef CONFIG_PIN_TLB
+/* Always pin the first 8 MB ITLB to prevent ITLB
+   misses while mucking around with SRR0/SRR1 in asm
+*/
 	lis	r8, MI_RSV4I@h
 	ori	r8, r8, 0x1c00
-#else
-	li	r8, 0
-#endif
+
 	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
 
 #ifdef CONFIG_PIN_TLB
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 7311fdf..4aa1740 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -123,6 +123,7 @@
 {
 	struct pci_dev *dev;
 	const char *type;
+	struct pci_slot *slot;
 
 	dev = alloc_pci_dev();
 	if (!dev)
@@ -140,6 +141,11 @@
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
 	dev->needs_freset = 0;		/* pcie fundamental reset required */
+	set_pcie_port_type(dev);
+
+	list_for_each_entry(slot, &dev->bus->slots, list)
+		if (PCI_SLOT(dev->devfn) == slot->number)
+			dev->slot = slot;
 
 	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
 	dev->device = get_int_prop(node, "device-id", 0xffff);
@@ -160,10 +166,14 @@
 	dev->error_state = pci_channel_io_normal;
 	dev->dma_mask = 0xffffffff;
 
+	/* Early fixups, before probing the BARs */
+	pci_fixup_device(pci_fixup_early, dev);
+
 	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
 		/* a PCI-PCI bridge */
 		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
 		dev->rom_base_reg = PCI_ROM_ADDRESS1;
+		set_pcie_hotplug_bridge(dev);
 	} else if (!strcmp(type, "cardbus")) {
 		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
 	} else {
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index c930ac3..7b816da 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -554,18 +554,6 @@
 
 void flush_thread(void)
 {
-#ifdef CONFIG_PPC64
-	struct thread_info *t = current_thread_info();
-
-	if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
-		clear_ti_thread_flag(t, TIF_ABI_PENDING);
-		if (test_ti_thread_flag(t, TIF_32BIT))
-			clear_ti_thread_flag(t, TIF_32BIT);
-		else
-			set_ti_thread_flag(t, TIF_32BIT);
-	}
-#endif
-
 	discard_lazy_cpu_state();
 
 	if (current->thread.dabr) {
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 1be9fe3..8777fb0 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -262,19 +262,19 @@
 	if (rtas_node == NULL)
 		return -ENODEV;
 
-	proc_create("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL,
+	proc_create("powerpc/rtas/progress", S_IRUGO|S_IWUSR, NULL,
 		    &ppc_rtas_progress_operations);
-	proc_create("ppc64/rtas/clock", S_IRUGO|S_IWUSR, NULL,
+	proc_create("powerpc/rtas/clock", S_IRUGO|S_IWUSR, NULL,
 		    &ppc_rtas_clock_operations);
-	proc_create("ppc64/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
+	proc_create("powerpc/rtas/poweron", S_IWUSR|S_IRUGO, NULL,
 		    &ppc_rtas_poweron_operations);
-	proc_create("ppc64/rtas/sensors", S_IRUGO, NULL,
+	proc_create("powerpc/rtas/sensors", S_IRUGO, NULL,
 		    &ppc_rtas_sensors_operations);
-	proc_create("ppc64/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
+	proc_create("powerpc/rtas/frequency", S_IWUSR|S_IRUGO, NULL,
 		    &ppc_rtas_tone_freq_operations);
-	proc_create("ppc64/rtas/volume", S_IWUSR|S_IRUGO, NULL,
+	proc_create("powerpc/rtas/volume", S_IWUSR|S_IRUGO, NULL,
 		    &ppc_rtas_tone_volume_operations);
-	proc_create("ppc64/rtas/rmo_buffer", S_IRUSR, NULL,
+	proc_create("powerpc/rtas/rmo_buffer", S_IRUSR, NULL,
 		    &ppc_rtas_rmo_buf_ops);
 	return 0;
 }
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index a521fb8..c2ee144 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -619,4 +619,16 @@
 	if (smp_ops->cpu_die)
 		smp_ops->cpu_die(cpu);
 }
+
+static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex);
+
+void cpu_hotplug_driver_lock()
+{
+	mutex_lock(&powerpc_cpu_hotplug_driver_mutex);
+}
+
+void cpu_hotplug_driver_unlock()
+{
+	mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
+}
 #endif
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index b47d8ce..b0754e2 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -303,7 +303,7 @@
 	lis	r4,0x1000
 1:	addic.	r4,r4,-0x1000
 	tlbie	r4
-	blt	1b
+	bgt	1b
 	sync
 
 	/* restore the MSR and turn on the MMU */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 9ba2cc8..6c6093d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -903,12 +903,21 @@
 		decrementer_set_next_event(DECREMENTER_MAX, dev);
 }
 
+static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec,
+				int shift)
+{
+	uint64_t tmp = ((uint64_t)ticks) << shift;
+
+	do_div(tmp, nsec);
+	return tmp;
+}
+
 static void __init setup_clockevent_multiplier(unsigned long hz)
 {
 	u64 mult, shift = 32;
 
 	while (1) {
-		mult = div_sc(hz, NSEC_PER_SEC, shift);
+		mult = div_sc64(hz, NSEC_PER_SEC, shift);
 		if (mult && (mult >> 32UL) == 0UL)
 			break;
 
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 07703f7..6fb6e8a 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -53,7 +53,7 @@
 
 config KVM_EXIT_TIMING
 	bool "Detailed exit timing"
-	depends on KVM
+	depends on KVM_440 || KVM_E500
 	---help---
 	  Calculate elapsed time for every exit/enter cycle. A per-vcpu
 	  report is available in debugfs kvm/vm#_vcpu#_timing.
diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c
index 0d957a4..5a783d8 100644
--- a/arch/powerpc/mm/mmap_64.c
+++ b/arch/powerpc/mm/mmap_64.c
@@ -47,7 +47,7 @@
 	if (current->personality & ADDR_COMPAT_LAYOUT)
 		return 1;
 
-	if (current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY)
+	if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
 		return 1;
 
 	return sysctl_legacy_va_layout;
@@ -77,7 +77,7 @@
 
 static inline unsigned long mmap_base(void)
 {
-	unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+	unsigned long gap = rlimit(RLIMIT_STACK);
 
 	if (gap < MIN_GAP)
 		gap = MIN_GAP;
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 282d930..1ec0657 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -63,15 +63,21 @@
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
 		psize = get_slice_psize(mm, addr);
+		/* Mask the address for the correct page size */
+		addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
 #endif
-	} else
+	} else {
 		psize = pte_pagesize_index(mm, addr, pte);
+		/* Mask the address for the standard page size.  If we
+		 * have a 64k page kernel, but the hardware does not
+		 * support 64k pages, this might be different from the
+		 * hardware page size encoded in the slice table. */
+		addr &= PAGE_MASK;
+	}
 
-	/* Mask the address for the correct page size */
-	addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
 
 	/* Build full vaddr */
 	if (!is_kernel_addr(addr)) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 21f61b8..cc29c0f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -338,7 +338,8 @@
 	}
 
 	mpic = mpic_alloc(np, r.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+			MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 04160a4..a15f582 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -46,6 +46,7 @@
 	__iomem u32 *bptr_vaddr;
 	struct device_node *np;
 	int n = 0;
+	int ioremappable;
 
 	WARN_ON (nr < 0 || nr >= NR_CPUS);
 
@@ -59,21 +60,37 @@
 		return;
 	}
 
+	/*
+	 * A secondary core could be in a spinloop in the bootpage
+	 * (0xfffff000), somewhere in highmem, or somewhere in lowmem.
+	 * The bootpage and highmem can be accessed via ioremap(), but
+	 * we need to directly access the spinloop if its in lowmem.
+	 */
+	ioremappable = *cpu_rel_addr > virt_to_phys(high_memory);
+
 	/* Map the spin table */
-	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	if (ioremappable)
+		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+	else
+		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
 
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
+	if (!ioremappable)
+		flush_dcache_range((ulong)bptr_vaddr,
+				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+
 	/* Wait a bit for the CPU to ack. */
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
 	local_irq_restore(flags);
 
-	iounmap(bptr_vaddr);
+	if (ioremappable)
+		iounmap(bptr_vaddr);
 
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index c4d4a19..eea1202 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -54,7 +54,7 @@
  */
 static int spufs_dump_write(struct file *file, const void *addr, int nr, loff_t *foffset)
 {
-	unsigned long limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
+	unsigned long limit = rlimit(RLIMIT_CORE);
 	ssize_t written;
 
 	if (*foffset + nr > limit)
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index 657b72f..2aa8b56 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -474,6 +474,8 @@
 	struct vio_waitevent we;
 	int ret;
 
+	init_completion(&we.com);
+
 	ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, 2);
 	if (ret) {
 		printk(KERN_WARNING "get_viotape_info: "
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 67b7a10..37bce52 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -236,7 +236,9 @@
 
 int dlpar_attach_node(struct device_node *dn)
 {
+#ifdef CONFIG_PROC_DEVICETREE
 	struct proc_dir_entry *ent;
+#endif
 	int rc;
 
 	of_node_set_flag(dn, OF_DYNAMIC);
@@ -267,10 +269,10 @@
 
 int dlpar_detach_node(struct device_node *dn)
 {
+#ifdef CONFIG_PROC_DEVICETREE
 	struct device_node *parent = dn->parent;
 	struct property *prop = dn->properties;
 
-#ifdef CONFIG_PROC_DEVICETREE
 	while (prop) {
 		remove_proc_entry(prop->name, dn->pde);
 		prop = prop->next;
@@ -344,20 +346,6 @@
 
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
 
-static DEFINE_MUTEX(pseries_cpu_hotplug_mutex);
-
-void cpu_hotplug_driver_lock(void)
-__acquires(pseries_cpu_hotplug_mutex)
-{
-	mutex_lock(&pseries_cpu_hotplug_mutex);
-}
-
-void cpu_hotplug_driver_unlock(void)
-__releases(pseries_cpu_hotplug_mutex)
-{
-	mutex_unlock(&pseries_cpu_hotplug_mutex);
-}
-
 static int dlpar_online_cpu(struct device_node *dn)
 {
 	int rc = 0;
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index b9b9e11..f5f7919 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -163,14 +163,13 @@
 /* Interface to generic irq subsystem */
 
 #ifdef CONFIG_SMP
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
+static int get_irq_server(unsigned int virq, cpumask_t cpumask,
+			  unsigned int strict_check)
 {
 	int server;
 	/* For the moment only implement delivery to all cpus or one cpu */
-	cpumask_t cpumask;
 	cpumask_t tmp = CPU_MASK_NONE;
 
-	cpumask_copy(&cpumask, irq_to_desc(virq)->affinity);
 	if (!distribute_irqs)
 		return default_server;
 
@@ -192,10 +191,7 @@
 	return default_server;
 }
 #else
-static int get_irq_server(unsigned int virq, unsigned int strict_check)
-{
-	return default_server;
-}
+#define get_irq_server(virq, cpumask, strict_check) (default_server)
 #endif
 
 static void xics_unmask_irq(unsigned int virq)
@@ -211,7 +207,7 @@
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
-	server = get_irq_server(virq, 0);
+	server = get_irq_server(virq, *(irq_to_desc(virq)->affinity), 0);
 
 	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
 				DEFAULT_PRIORITY);
@@ -405,7 +401,7 @@
 	 * For the moment only implement delivery to all cpus or one cpu.
 	 * Get current irq_server for the given irq
 	 */
-	irq_server = get_irq_server(virq, 1);
+	irq_server = get_irq_server(virq, *cpumask, 1);
 	if (irq_server == -1) {
 		char cpulist[128];
 		cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
@@ -788,9 +784,13 @@
 {
 	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
 
-	BUG_ON(os_cppr->index != 0);
+	/*
+	 * we only really want to set the priority when there's
+	 * just one cppr value on the stack
+	 */
+	WARN_ON(os_cppr->index != 0);
 
-	os_cppr->stack[os_cppr->index] = cppr;
+	os_cppr->stack[0] = cppr;
 
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		lpar_cppr_info(cppr);
@@ -825,8 +825,14 @@
 
 void xics_teardown_cpu(void)
 {
+	struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr);
 	int cpu = smp_processor_id();
 
+	/*
+	 * we have to reset the cppr index to 0 because we're
+	 * not going to return from the IPI
+	 */
+	os_cppr->index = 0;
 	xics_set_cpu_priority(0);
 
 	/* Clear any pending IPI request */
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 6ff9d71..8aa3302 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -569,7 +569,8 @@
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
 	/* Setup config space */
-	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4,
+					PPC_INDIRECT_TYPE_SET_CFG_TYPE);
 
 	/* Disable all windows */
 	writel(0, reg + PCIX0_POM0SA);
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index efb74fd..b1066b9 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -52,6 +52,10 @@
 	unreachable();					\
 } while (0)
 
+#define __WARN() do {					\
+	__EMIT_BUG(BUGFLAG_WARNING);			\
+} while (0)
+
 #define WARN_ON(x) ({					\
 	int __ret_warn_on = !!(x);			\
 	if (__builtin_constant_p(__ret_warn_on)) {	\
diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h
index 3f26131..c2fb432f 100644
--- a/arch/s390/include/asm/irqflags.h
+++ b/arch/s390/include/asm/irqflags.h
@@ -1,14 +1,12 @@
 /*
- *  include/asm-s390/irqflags.h
- *
- *    Copyright (C) IBM Corp. 2006
- *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ *    Copyright IBM Corp. 2006,2010
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #ifndef __ASM_IRQFLAGS_H
 #define __ASM_IRQFLAGS_H
 
-#ifdef __KERNEL__
+#include <linux/types.h>
 
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 
@@ -102,5 +100,4 @@
 /* For spinlocks etc */
 #define raw_local_irq_save(x)	((x) = raw_local_irq_disable())
 
-#endif /* __KERNEL__ */
 #endif /* __ASM_IRQFLAGS_H */
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index f2ef4b6..c25dfac 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -293,12 +293,12 @@
 	__u64	clock_comparator;		/* 0x02d0 */
 	__u32	machine_flags;			/* 0x02d8 */
 	__u32	ftrace_func;			/* 0x02dc */
-	__u8	pad_0x02f0[0x0300-0x02f0];	/* 0x02f0 */
+	__u8	pad_0x02e0[0x0300-0x02e0];	/* 0x02e0 */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
 
-	__u8	pad_0x0400[0x0e00-0x0400];	/* 0x0400 */
+	__u8	pad_0x0340[0x0e00-0x0340];	/* 0x0340 */
 
 	/*
 	 * 0xe00 contains the address of the IPL Parameter Information
diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h
index ec403d4..f72d611 100644
--- a/arch/s390/include/asm/sigp.h
+++ b/arch/s390/include/asm/sigp.h
@@ -15,11 +15,19 @@
 #ifndef __SIGP__
 #define __SIGP__
 
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
+#include <asm/system.h>
 
 /* get real cpu address from logical cpu number */
-extern volatile int __cpu_logical_map[];
+extern int __cpu_logical_map[];
+
+static inline int cpu_logical_map(int cpu)
+{
+#ifdef CONFIG_SMP
+	return __cpu_logical_map[cpu];
+#else
+	return stap();
+#endif
+}
 
 typedef enum
 {
@@ -79,7 +87,7 @@
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		:	"=d"	(ccode)
-		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		: "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
 		  "a" (order_code) : "cc" , "memory");
 	return ccode;
 }
@@ -98,7 +106,7 @@
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		: "=d" (ccode)
-		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		: "d" (reg1), "d" (cpu_logical_map(cpu_addr)),
 		  "a" (order_code) : "cc" , "memory");
 	return ccode;
 }
@@ -118,7 +126,7 @@
 		"	ipm	%0\n"
 		"	srl	%0,28\n"
 		: "=d" (ccode), "+d" (reg1)
-		: "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+		: "d" (cpu_logical_map(cpu_addr)), "a" (order_code)
 		: "cc" , "memory");
 	*statusptr = reg1;
 	return ccode;
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 07eb61b..66069e7 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -93,13 +93,12 @@
 #define TIF_SYSCALL_AUDIT	9	/* syscall auditing active */
 #define TIF_SECCOMP		10	/* secure computing */
 #define TIF_SYSCALL_TRACEPOINT	11	/* syscall tracepoint instrumentation */
-#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_31BIT		18	/* 32bit process */ 
-#define TIF_MEMDIE		19
-#define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
-#define TIF_FREEZE		21	/* thread is freezing for suspend */
+#define TIF_31BIT		17	/* 32bit process */
+#define TIF_MEMDIE		18
+#define TIF_RESTORE_SIGMASK	19	/* restore signal mask in do_signal() */
+#define TIF_FREEZE		20	/* thread is freezing for suspend */
 
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
@@ -112,7 +111,6 @@
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index 192a720..6e9f049 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -269,8 +269,7 @@
 #define	__NR_pwritev		329
 #define __NR_rt_tgsigqueueinfo	330
 #define __NR_perf_event_open	331
-#define __NR_recvmmsg		332
-#define NR_syscalls 333
+#define NR_syscalls 332
 
 /* 
  * There are some system calls that are not present on 64 bit, some
@@ -377,6 +376,9 @@
 #define __IGNORE_migrate_pages
 #define __IGNORE_move_pages
 
+/* Ignore system calls that are also reachable via sys_socket */
+#define __IGNORE_recvmmsg
+
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_SYS_ALARM
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 22c9e55..11c3aba 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -616,44 +616,35 @@
  */
 
 struct mmap_arg_struct_emu31 {
-	u32	addr;
-	u32	len;
-	u32	prot;
-	u32	flags;
-	u32	fd;
-	u32	offset;
+	compat_ulong_t addr;
+	compat_ulong_t len;
+	compat_ulong_t prot;
+	compat_ulong_t flags;
+	compat_ulong_t fd;
+	compat_ulong_t offset;
 };
 
-asmlinkage unsigned long
-old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg)
 {
 	struct mmap_arg_struct_emu31 a;
-	int error = -EFAULT;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-
-	error = -EINVAL;
+		return -EFAULT;
 	if (a.offset & ~PAGE_MASK)
-		goto out;
-
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
-			       a.offset >> PAGE_SHIFT);
-out:
-	return error;
+		return -EINVAL;
+	a.addr = (unsigned long) compat_ptr(a.addr);
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd,
+			      a.offset >> PAGE_SHIFT);
 }
 
-asmlinkage long 
-sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
+asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg)
 {
 	struct mmap_arg_struct_emu31 a;
-	int error = -EFAULT;
 
 	if (copy_from_user(&a, arg, sizeof(a)))
-		goto out;
-	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
-out:
-	return error;
+		return -EFAULT;
+	a.addr = (unsigned long) compat_ptr(a.addr);
+	return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset);
 }
 
 asmlinkage long sys32_read(unsigned int fd, char __user * buf, size_t count)
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index faeaccc..30de2d0 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1853,12 +1853,3 @@
 	llgtr	%r3,%r3			# compat_uptr_t *
 	llgtr	%r4,%r4			# compat_uptr_t *
 	jg	sys32_execve		# branch to system call
-
-	.globl	compat_sys_recvmmsg_wrapper
-compat_sys_recvmmsg_wrapper:
-	lgfr	%r2,%r2			# int
-	llgtr	%r3,%r3			# struct compat_mmsghdr *
-	llgfr	%r4,%r4			# unsigned int
-	llgfr	%r5,%r5			# unsigned int
-	llgtr	%r6,%r6			# struct compat_timespec *
-	jg	compat_sys_recvmmsg
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 48215d1..e8ef21c 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -571,6 +571,7 @@
 	mvc	__THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
 	oi	__TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
 	TRACE_IRQS_ON
+	lm	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	b	BASED(sysc_do_svc)
 
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 9aff1d4..f33658f 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -549,6 +549,7 @@
 	mvc	__THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
 	oi	__TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
 	TRACE_IRQS_ON
+	lmg	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	j	sysc_do_svc
 
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 5417eb5..00b6d1d 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -153,8 +153,6 @@
 
 void flush_thread(void)
 {
-	clear_used_math();
-	clear_tsk_thread_flag(current, TIF_USEDFPU);
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -217,6 +215,7 @@
 	p->thread.mm_segment = get_fs();
 	/* Don't copy debug registers */
 	memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+	clear_tsk_thread_flag(p, TIF_SINGLE_STEP);
 	/* Initialize per thread user and system timer values */
 	ti = task_thread_info(p);
 	ti->user_timer = 0;
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 13815d3..7cf4642 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -65,6 +65,7 @@
 {
 	struct pt_regs *regs;
 	per_struct *per_info;
+	per_cr_words cr_words;
 
 	regs = task_pt_regs(task);
 	per_info = (per_struct *) &task->thread.per_info;
@@ -98,6 +99,13 @@
 		per_info->control_regs.bits.storage_alt_space_ctl = 1;
 	else
 		per_info->control_regs.bits.storage_alt_space_ctl = 0;
+
+	if (task == current) {
+		__ctl_store(cr_words, 9, 11);
+		if (memcmp(&cr_words, &per_info->control_regs.words,
+			   sizeof(cr_words)) != 0)
+			__ctl_load(per_info->control_regs.words, 9, 11);
+	}
 }
 
 void user_enable_single_step(struct task_struct *task)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 0663287..8d8957b 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -87,7 +87,6 @@
 char elf_platform[ELF_PLATFORM_SIZE];
 
 struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
-volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
 
 int __initdata memory_end_set;
 unsigned long __initdata memory_end;
@@ -124,12 +123,6 @@
          */
 	get_cpu_id(&S390_lowcore.cpu_id);
 
-        /*
-         * Force FPU initialization:
-         */
-        clear_thread_flag(TIF_USEDFPU);
-        clear_used_math();
-
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
 	BUG_ON(current->mm);
@@ -855,7 +848,6 @@
 	setup_lowcore();
 
         cpu_init();
-	__cpu_logical_map[0] = stap();
 	s390_init_cpu_topology();
 
 	/*
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 6b4fef8..6289945 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -64,7 +64,7 @@
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	current->state = TASK_INTERRUPTIBLE;
+	set_current_state(TASK_INTERRUPTIBLE);
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);
 
@@ -500,18 +500,10 @@
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
 
 			/*
-			 * If we would have taken a single-step trap
-			 * for a normal instruction, act like we took
-			 * one for the handler setup.
-			 */
-			if (current->thread.per_info.single_step)
-				set_thread_flag(TIF_SINGLE_STEP);
-
-			/*
 			 * Let tracing know that we've done the handler setup.
 			 */
 			tracehook_signal_handler(signr, &info, &ka, regs,
-					 test_thread_flag(TIF_SINGLE_STEP));
+					current->thread.per_info.single_step);
 		}
 		return;
 	}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 93e5203..76a6fdd 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -52,6 +52,9 @@
 #include <asm/cpu.h>
 #include "entry.h"
 
+/* logical cpu to cpu address */
+int __cpu_logical_map[NR_CPUS];
+
 static struct task_struct *current_set[NR_CPUS];
 
 static u8 smp_cpu_type;
@@ -717,6 +720,12 @@
 {
 }
 
+void __init smp_setup_processor_id(void)
+{
+	S390_lowcore.cpu_nr = 0;
+	__cpu_logical_map[0] = stap();
+}
+
 /*
  * the frequency of the profiling timer can be changed
  * by writing a multiplier value into /proc/profile.
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 4f292c9..30eca07 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -340,4 +340,3 @@
 SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
 SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
 SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper)
-SYSCALL(sys_recvmmsg,sys_recvmmsg,compat_sys_recvmmsg_wrapper)
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 3c72c9c..14ef6f0 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -114,7 +114,7 @@
 
 		rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin;
 		for_each_present_cpu(lcpu) {
-			if (__cpu_logical_map[lcpu] == rcpu) {
+			if (cpu_logical_map(lcpu) == rcpu) {
 				cpu_set(lcpu, core->mask);
 				smp_cpu_polarization[lcpu] = tl_cpu->pp;
 			}
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index ba9d8a7..b400964 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -213,7 +213,7 @@
 	return rc2;
 }
 
-static const intercept_handler_t intercept_funcs[0x48 >> 2] = {
+static const intercept_handler_t intercept_funcs[] = {
 	[0x00 >> 2] = handle_noop,
 	[0x04 >> 2] = handle_instruction,
 	[0x08 >> 2] = handle_prog,
@@ -230,7 +230,7 @@
 	intercept_handler_t func;
 	u8 code = vcpu->arch.sie_block->icptcode;
 
-	if (code & 3 || code > 0x48)
+	if (code & 3 || (code >> 2) >= ARRAY_SIZE(intercept_funcs))
 		return -ENOTSUPP;
 	func = intercept_funcs[code >> 2];
 	if (func)
diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c
index 10754a3..cff327f 100644
--- a/arch/s390/lib/spinlock.c
+++ b/arch/s390/lib/spinlock.c
@@ -34,7 +34,7 @@
 {
 	if (MACHINE_HAS_DIAG9C)
 		asm volatile("diag %0,0,0x9c"
-			     : : "d" (__cpu_logical_map[cpu]));
+			     : : "d" (cpu_logical_map(cpu)));
 	else
 		_raw_yield();
 }
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index f4558cc..869efba 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -40,7 +40,7 @@
 
 static inline unsigned long mmap_base(void)
 {
-	unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+	unsigned long gap = rlimit(RLIMIT_STACK);
 
 	if (gap < MIN_GAP)
 		gap = MIN_GAP;
@@ -61,7 +61,7 @@
 #endif
 	return sysctl_legacy_va_layout ||
 	    (current->personality & ADDR_COMPAT_LAYOUT) ||
-	    current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY;
+	    rlimit(RLIMIT_STACK) == RLIM_INFINITY;
 }
 
 #ifndef CONFIG_64BIT
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6a8861b..5c24628 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -353,6 +353,10 @@
 	{
 		I2C_BOARD_INFO("r2025sd", 0x32),
 	},
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1c),
+		.irq = 33,
+	}
 };
 
 /* KEYSC */
@@ -1115,6 +1119,10 @@
 	gpio_direction_output(GPIO_PTU0, 0);
 	mdelay(20);
 
+	/* enable motion sensor */
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
 	/* enable I2C device */
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 5d0f70b..858ecb2 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -533,7 +533,7 @@
 	while (t--) {
 		if (!ctrl_inw(EEPROM_STAT))
 			return 1;
-		cpu_relax();
+		udelay(1);
 	}
 
 	printk(KERN_ERR "ms7724se can not access to eeprom\n");
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index f18c4f9..365744b 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -345,12 +345,13 @@
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
 #define __NR_perf_event_open	336
-#define __NR_recvmmsg		337
 
-#define NR_syscalls 338
+#define NR_syscalls 337
 
 #ifdef __KERNEL__
 
+#define __IGNORE_recvmmsg
+
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 3e7645d..25de158 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -386,10 +386,11 @@
 #define __NR_rt_tgsigqueueinfo	363
 #define __NR_perf_event_open	364
 #define __NR_recvmmsg		365
+#define __NR_accept4		366
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 366
+#define NR_syscalls 367
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index f3a46be..83da5de 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -598,7 +598,7 @@
 static int clk_debugfs_register_one(struct clk *c)
 {
 	int err;
-	struct dentry *d, *child;
+	struct dentry *d, *child, *child_tmp;
 	struct clk *pa = c->parent;
 	char s[255];
 	char *p = s;
@@ -630,7 +630,7 @@
 
 err_out:
 	d = c->dentry;
-	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
 		debugfs_remove(child);
 	debugfs_remove(c->dentry);
 	return err;
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 3f7e2a2..f6a389c 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -132,7 +132,6 @@
 	 mov	#1, r5
 
 call_handle_tlbmiss:
-	setup_frame_reg
 	mov.l	1f, r0
 	mov	r5, r8
 	mov.l	@r0, r6
@@ -365,6 +364,8 @@
 	 mov.l	@k2, k2		! read out vector and keep in k2
 
 handle_exception_special:
+	setup_frame_reg
+
 	! Setup return address and jump to exception handler
 	mov.l	7f, r9		! fetch return address
 	stc	r2_bank, r0	! k2 (vector)
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 3576b70..e511680 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -540,6 +540,8 @@
 	mempool_free(frame, dwarf_frame_pool);
 }
 
+extern void ret_from_irq(void);
+
 /**
  *	dwarf_unwind_stack - unwind the stack
  *
@@ -678,6 +680,24 @@
 	addr = frame->cfa + reg->addr;
 	frame->return_addr = __raw_readl(addr);
 
+	/*
+	 * Ah, the joys of unwinding through interrupts.
+	 *
+	 * Interrupts are tricky - the DWARF info needs to be _really_
+	 * accurate and unfortunately I'm seeing a lot of bogus DWARF
+	 * info. For example, I've seen interrupts occur in epilogues
+	 * just after the frame pointer (r14) had been restored. The
+	 * problem was that the DWARF info claimed that the CFA could be
+	 * reached by using the value of the frame pointer before it was
+	 * restored.
+	 *
+	 * So until the compiler can be trusted to produce reliable
+	 * DWARF info when it really matters, let's stop unwinding once
+	 * we've calculated the function that was interrupted.
+	 */
+	if (prev && prev->pc == (unsigned long)ret_from_irq)
+		frame->return_addr = 0;
+
 	return frame;
 
 bail:
@@ -892,18 +912,18 @@
 
 static void dwarf_unwinder_cleanup(void)
 {
-	struct dwarf_cie *cie;
-	struct dwarf_fde *fde;
+	struct dwarf_cie *cie, *cie_tmp;
+	struct dwarf_fde *fde, *fde_tmp;
 
 	/*
 	 * Deallocate all the memory allocated for the DWARF unwinder.
 	 * Traverse all the FDE/CIE lists and remove and free all the
 	 * memory associated with those data structures.
 	 */
-	list_for_each_entry(cie, &dwarf_cie_list, link)
+	list_for_each_entry_safe(cie, cie_tmp, &dwarf_cie_list, link)
 		kfree(cie);
 
-	list_for_each_entry(fde, &dwarf_fde_list, link)
+	list_for_each_entry_safe(fde, fde_tmp, &dwarf_fde_list, link)
 		kfree(fde);
 
 	kmem_cache_destroy(dwarf_reg_cachep);
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index f0abd58..2b15ae6 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -70,8 +70,14 @@
 	CFI_STARTPROC simple
 	CFI_DEF_CFA r14, 0
 	CFI_REL_OFFSET 17, 64
-	CFI_REL_OFFSET 15, 0
+	CFI_REL_OFFSET 15, 60
 	CFI_REL_OFFSET 14, 56
+	CFI_REL_OFFSET 13, 52
+	CFI_REL_OFFSET 12, 48
+	CFI_REL_OFFSET 11, 44
+	CFI_REL_OFFSET 10, 40
+	CFI_REL_OFFSET 9, 36
+	CFI_REL_OFFSET 8, 32
 	preempt_stop()
 ENTRY(ret_from_irq)
 	!
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 31f80c6..ec79faf 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -368,7 +368,7 @@
 void flush_thread(void)
 {
 
-	/* Called by fs/exec.c (flush_old_exec) to remove traces of a
+	/* Called by fs/exec.c (setup_new_exec) to remove traces of a
 	 * previously running executable. */
 #ifdef CONFIG_SH_FPU
 	if (last_task_used_math == current) {
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index 873ebdc..b063eb8 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -133,6 +133,8 @@
 	struct pt_regs *regs = child->thread.uregs;
 
 	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
 
 void user_disable_single_step(struct task_struct *child)
@@ -140,6 +142,8 @@
 	struct pt_regs *regs = child->thread.uregs;
 
 	regs->sr &= ~SR_SSTEP;
+
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
 
 static int genregs_get(struct task_struct *target,
@@ -454,6 +458,8 @@
 
 asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context))
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
 				   regs->regs[9]);
@@ -461,8 +467,9 @@
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_exit(regs, regs->regs[9]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(regs, 0);
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
 
 /* Called with interrupts disabled */
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index ce76dbd..580e97d 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -118,7 +118,9 @@
 			 * clear the TS_RESTORE_SIGMASK flag.
 			 */
 			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-			tracehook_signal_handler(signr, &info, &ka, regs, 0);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+					test_thread_flag(TIF_SINGLESTEP));
 			return 1;
 		}
 	}
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 4bd5a11..19fd11d 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -353,4 +353,3 @@
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
 	.long sys_perf_event_open
-	.long sys_recvmmsg
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 07d2aae..2048a20 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -392,3 +392,4 @@
 	.long sys_rt_tgsigqueueinfo
 	.long sys_perf_event_open
 	.long sys_recvmmsg		/* 365 */
+	.long sys_accept4
diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile
index 558a56b..2082af1 100644
--- a/arch/sh/tools/Makefile
+++ b/arch/sh/tools/Makefile
@@ -13,4 +13,4 @@
 include/generated/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
 	$(Q)mkdir -p $(dir $@)
-	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
+	$(Q)LC_ALL=C $(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 108197a..4097f6a 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -64,8 +64,11 @@
 	default 64 if SPARC64
 
 config GENERIC_TIME
+	def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
 	bool
-	default y if SPARC64
+	default y if SPARC32
 
 config GENERIC_CMOS_UPDATE
 	bool
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 983d598..99a1f19 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Wed Sep 16 00:03:43 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 11 23:20:31 2010
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -41,6 +41,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -88,21 +89,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
@@ -131,14 +132,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -168,8 +196,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_SUN_PM=y
 # CONFIG_SPARC_LED is not set
@@ -257,6 +284,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -295,9 +323,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -335,6 +360,10 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
@@ -398,8 +427,11 @@
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -434,7 +466,9 @@
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_SUNESP=y
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -450,7 +484,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -487,6 +521,7 @@
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -546,6 +581,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -555,6 +591,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -574,6 +611,7 @@
 CONFIG_KEYBOARD_ATKBD=m
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_SUNKBD=m
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -604,6 +642,7 @@
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -636,6 +675,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_CONSOLE_POLL=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -661,6 +701,11 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -675,9 +720,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -699,6 +742,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -776,7 +820,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -955,6 +1001,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1003,9 +1050,9 @@
 CONFIG_KGDB_SERIAL_CONSOLE=y
 CONFIG_KGDB_TESTS=y
 # CONFIG_KGDB_TESTS_ON_BOOT is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_STACK_DEBUG is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
 
 #
 # Security options
@@ -1013,7 +1060,11 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index f80b881..41c5a56 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31
-# Tue Sep 15 17:06:03 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan 20 16:31:47 2010
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -20,6 +20,7 @@
 CONFIG_AUDIT_ARCH=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -50,6 +51,7 @@
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=64
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -62,8 +64,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -97,24 +98,25 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
-CONFIG_PERF_COUNTERS=y
+CONFIG_PERF_EVENTS=y
 CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -152,14 +154,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -179,6 +208,7 @@
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_SPARC64_SMP=y
+CONFIG_EARLYFB=y
 CONFIG_SPARC64_PAGE_SIZE_8KB=y
 # CONFIG_SPARC64_PAGE_SIZE_64KB is not set
 CONFIG_SECCOMP=y
@@ -216,8 +246,7 @@
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=1
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
@@ -315,6 +344,7 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
 CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
@@ -356,9 +386,6 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -376,6 +403,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -397,6 +425,11 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -408,6 +441,7 @@
 CONFIG_SUNVDC=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -415,6 +449,7 @@
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -522,8 +557,11 @@
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -557,7 +595,9 @@
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
@@ -568,7 +608,9 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
+# CONFIG_MULTICORE_RAID456 is not set
 CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -592,7 +634,7 @@
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -664,6 +706,7 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -745,6 +788,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -754,6 +798,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -770,9 +815,13 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
 CONFIG_KEYBOARD_LKKBD=m
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -812,6 +861,7 @@
 CONFIG_SERIO_PCIPS2=m
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -844,6 +894,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -858,6 +909,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
@@ -898,11 +950,6 @@
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -911,10 +958,6 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -932,6 +975,11 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -955,6 +1003,7 @@
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -981,6 +1030,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -993,9 +1043,8 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_ULTRA45 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1013,16 +1062,20 @@
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1176,6 +1229,7 @@
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
 # CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
@@ -1311,6 +1365,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1426,6 +1481,7 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1447,7 +1503,9 @@
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_MSM6242 is not set
 CONFIG_RTC_DRV_BQ4802=y
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1625,6 +1683,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1678,9 +1737,11 @@
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_GENERIC_TRACER=y
 CONFIG_TRACING_SUPPORT=y
@@ -1688,6 +1749,7 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1706,6 +1768,7 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
 # CONFIG_STACK_DEBUG is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
 
 #
 # Security options
@@ -1714,11 +1777,17 @@
 # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_XOR_BLOCKS=m
 CONFIG_ASYNC_CORE=m
 CONFIG_ASYNC_MEMCPY=m
 CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
index ff66bb8..e678803 100644
--- a/arch/sparc/include/asm/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
@@ -195,17 +195,10 @@
 #define ELF_PLATFORM	(NULL)
 
 #define SET_PERSONALITY(ex)				\
-do {	unsigned long new_flags = current_thread_info()->flags; \
-	new_flags &= _TIF_32BIT;			\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
-		new_flags |= _TIF_32BIT;		\
+do {	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
+		set_thread_flag(TIF_32BIT);		\
 	else						\
-		new_flags &= ~_TIF_32BIT;		\
-	if ((current_thread_info()->flags & _TIF_32BIT) \
-	    != new_flags)				\
-		set_thread_flag(TIF_ABI_PENDING);	\
-	else						\
-		clear_thread_flag(TIF_ABI_PENDING);	\
+		clear_thread_flag(TIF_32BIT);		\
 	/* flush_thread will update pgd cache */	\
 	if (personality(current->personality) != PER_LINUX32)	\
 		set_personality(PER_LINUX |		\
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
index 93fe21e..679c750 100644
--- a/arch/sparc/include/asm/io_32.h
+++ b/arch/sparc/include/asm/io_32.h
@@ -8,7 +8,7 @@
 #include <asm/page.h>      /* IO address mapping routines need this */
 #include <asm/system.h>
 
-#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
 
 static inline u32 flip_dword (u32 l)
 {
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
index f72080b..156707b 100644
--- a/arch/sparc/include/asm/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
@@ -143,7 +143,7 @@
 #define phys_to_virt		__va
 
 #define ARCH_PFN_OFFSET		(pfn_base)
-#define virt_to_page(kaddr)	(mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 
 #define pfn_valid(pfn)		(((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
 #define virt_addr_valid(kaddr)	((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
diff --git a/arch/sparc/include/asm/param.h b/arch/sparc/include/asm/param.h
index 9836d9a..0bc356b 100644
--- a/arch/sparc/include/asm/param.h
+++ b/arch/sparc/include/asm/param.h
@@ -1,22 +1,7 @@
 #ifndef _ASMSPARC_PARAM_H
 #define _ASMSPARC_PARAM_H
 
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ)
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
 #define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
+#include <asm-generic/param.h>
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif
+#endif /* _ASMSPARC_PARAM_H */
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
index 55db5ec..39327d6 100644
--- a/arch/sparc/include/asm/stat.h
+++ b/arch/sparc/include/asm/stat.h
@@ -53,8 +53,8 @@
 	ino_t		st_ino;
 	mode_t		st_mode;
 	short		st_nlink;
-	uid_t		st_uid;
-	gid_t		st_gid;
+	uid16_t		st_uid;
+	gid16_t		st_gid;
 	unsigned short	st_rdev;
 	off_t		st_size;
 	time_t		st_atime;
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 7257ebb..39be9f2 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -228,12 +228,11 @@
 #define TIF_SECCOMP		9	/* secure computing */
 #define TIF_SYSCALL_AUDIT	10	/* syscall auditing active */
 #define TIF_SYSCALL_TRACEPOINT	11	/* syscall tracepoint instrumentation */
-/* flag bit 11 is available */
 /* NOTE: Thread flags >= 12 should be ones we have no interest
  *       in using in assembly, else we can't use the mask as
  *       an immediate value in instructions such as andcc.
  */
-#define TIF_ABI_PENDING		12
+/* flag bit 12 is available */
 #define TIF_MEMDIE		13
 #define TIF_POLLING_NRFLAG	14
 #define TIF_FREEZE		15	/* is freezing for suspend */
@@ -248,7 +247,6 @@
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
-#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 
diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
index b6ccdb0..a254750 100644
--- a/arch/sparc/include/asm/timex_32.h
+++ b/arch/sparc/include/asm/timex_32.h
@@ -12,4 +12,5 @@
 typedef unsigned long cycles_t;
 #define get_cycles()	(0)
 
+extern u32 (*do_arch_gettimeoffset)(void);
 #endif
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 600a790..1c79f32 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -12,7 +12,9 @@
 
 #define parent_node(node)	(node)
 
-#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
+#define cpumask_of_node(node) ((node) == -1 ?				\
+			       cpu_all_mask :				\
+			       &numa_cpumask_lookup_table[node])
 
 struct pci_bus;
 #ifdef CONFIG_PCI
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 489d2ba..25f1d10 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -274,7 +274,7 @@
 
 	if (unlikely(sz != -1 && sz < n)) {
 		copy_from_user_overflow();
-		return -EFAULT;
+		return n;
 	}
 
 	if (n && __access_ok((unsigned long) from, n))
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index dbc1416..2406788 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -221,8 +221,8 @@
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long size)
 {
-	unsigned long ret = (unsigned long) -EFAULT;
 	int sz = __compiletime_object_size(to);
+	unsigned long ret = size;
 
 	if (likely(sz == -1 || sz >= size)) {
 		ret = ___copy_from_user(to, from, size);
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index f3b5466..4589ca3 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -99,7 +99,7 @@
 
 	p->leds_resource.start = (unsigned long)
 		(p->clock_regs + CLOCK_CTRL);
-	p->leds_resource.end = p->leds_resource.end;
+	p->leds_resource.end = p->leds_resource.start;
 	p->leds_resource.name = "leds";
 
 	p->leds_pdev.name = "sunfire-clockboard-leds";
@@ -194,7 +194,7 @@
 	if (!p->central) {
 		p->leds_resource.start = (unsigned long)
 			(p->pregs + FHC_PREGS_CTRL);
-		p->leds_resource.end = p->leds_resource.end;
+		p->leds_resource.end = p->leds_resource.start;
 		p->leds_resource.name = "leds";
 
 		p->leds_pdev.name = "sunfire-fhc-leds";
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index 8d6882b..e1cbdb9 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -250,12 +250,12 @@
 };
 
 #ifdef CONFIG_SMP
-static int irq_choose_cpu(unsigned int virt_irq)
+static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity)
 {
 	cpumask_t mask;
 	int cpuid;
 
-	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
+	cpumask_copy(&mask, affinity);
 	if (cpus_equal(mask, cpu_online_map)) {
 		cpuid = map_to_cpu(virt_irq);
 	} else {
@@ -268,10 +268,8 @@
 	return cpuid;
 }
 #else
-static int irq_choose_cpu(unsigned int virt_irq)
-{
-	return real_hard_smp_processor_id();
-}
+#define irq_choose_cpu(virt_irq, affinity)	\
+	real_hard_smp_processor_id()
 #endif
 
 static void sun4u_irq_enable(unsigned int virt_irq)
@@ -282,7 +280,8 @@
 		unsigned long cpuid, imap, val;
 		unsigned int tid;
 
-		cpuid = irq_choose_cpu(virt_irq);
+		cpuid = irq_choose_cpu(virt_irq,
+				       irq_desc[virt_irq].affinity);
 		imap = data->imap;
 
 		tid = sun4u_compute_tid(imap, cpuid);
@@ -299,7 +298,24 @@
 static int sun4u_set_affinity(unsigned int virt_irq,
 			       const struct cpumask *mask)
 {
-	sun4u_irq_enable(virt_irq);
+	struct irq_handler_data *data = get_irq_chip_data(virt_irq);
+
+	if (likely(data)) {
+		unsigned long cpuid, imap, val;
+		unsigned int tid;
+
+		cpuid = irq_choose_cpu(virt_irq, mask);
+		imap = data->imap;
+
+		tid = sun4u_compute_tid(imap, cpuid);
+
+		val = upa_readq(imap);
+		val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS |
+			 IMAP_AID_SAFARI | IMAP_NID_SAFARI);
+		val |= tid | IMAP_VALID;
+		upa_writeq(val, imap);
+		upa_writeq(ICLR_IDLE, data->iclr);
+	}
 
 	return 0;
 }
@@ -340,7 +356,8 @@
 static void sun4v_irq_enable(unsigned int virt_irq)
 {
 	unsigned int ino = virt_irq_table[virt_irq].dev_ino;
-	unsigned long cpuid = irq_choose_cpu(virt_irq);
+	unsigned long cpuid = irq_choose_cpu(virt_irq,
+					     irq_desc[virt_irq].affinity);
 	int err;
 
 	err = sun4v_intr_settarget(ino, cpuid);
@@ -361,7 +378,7 @@
 			       const struct cpumask *mask)
 {
 	unsigned int ino = virt_irq_table[virt_irq].dev_ino;
-	unsigned long cpuid = irq_choose_cpu(virt_irq);
+	unsigned long cpuid = irq_choose_cpu(virt_irq, mask);
 	int err;
 
 	err = sun4v_intr_settarget(ino, cpuid);
@@ -403,7 +420,7 @@
 	unsigned long cpuid, dev_handle, dev_ino;
 	int err;
 
-	cpuid = irq_choose_cpu(virt_irq);
+	cpuid = irq_choose_cpu(virt_irq, irq_desc[virt_irq].affinity);
 
 	dev_handle = virt_irq_table[virt_irq].dev_handle;
 	dev_ino = virt_irq_table[virt_irq].dev_ino;
@@ -433,7 +450,7 @@
 	unsigned long cpuid, dev_handle, dev_ino;
 	int err;
 
-	cpuid = irq_choose_cpu(virt_irq);
+	cpuid = irq_choose_cpu(virt_irq, mask);
 
 	dev_handle = virt_irq_table[virt_irq].dev_handle;
 	dev_ino = virt_irq_table[virt_irq].dev_ino;
diff --git a/arch/sparc/kernel/kstack.h b/arch/sparc/kernel/kstack.h
index 4248d96..5247283 100644
--- a/arch/sparc/kernel/kstack.h
+++ b/arch/sparc/kernel/kstack.h
@@ -11,6 +11,10 @@
 {
 	unsigned long base = (unsigned long) tp;
 
+	/* Stack pointer must be 16-byte aligned.  */
+	if (sp & (16UL - 1))
+		return false;
+
 	if (sp >= (base + sizeof(struct thread_info)) &&
 	    sp <= (base + THREAD_SIZE - sizeof(struct sparc_stackf)))
 		return true;
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 4c26eb5..53a58b3 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -105,7 +105,7 @@
 
 static int of_bus_ambapp_match(struct device_node *np)
 {
-	return !strcmp(np->name, "ambapp");
+	return !strcmp(np->type, "ambapp");
 }
 
 static void of_bus_ambapp_count_cells(struct device_node *child,
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 539e83f..592b03d 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -247,6 +247,7 @@
 					 struct pci_bus *bus, int devfn)
 {
 	struct dev_archdata *sd;
+	struct pci_slot *slot;
 	struct of_device *op;
 	struct pci_dev *dev;
 	const char *type;
@@ -286,6 +287,11 @@
 	dev->dev.bus = &pci_bus_type;
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
+	set_pcie_port_type(dev);
+
+	list_for_each_entry(slot, &dev->bus->slots, list)
+		if (PCI_SLOT(dev->devfn) == slot->number)
+			dev->slot = slot;
 
 	dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
 	dev->device = of_getintprop_default(node, "device-id", 0xffff);
@@ -322,6 +328,7 @@
 
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
+	dev->dma_mask = 0xffffffff;
 
 	if (!strcmp(node->name, "pci")) {
 		/* a PCI-PCI bridge */
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 85e7037..4e2724e 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -30,6 +30,7 @@
 #include <asm/oplib.h>
 #include <asm/prom.h>
 #include <asm/pcic.h>
+#include <asm/timex.h>
 #include <asm/timer.h>
 #include <asm/uaccess.h>
 #include <asm/irq_regs.h>
@@ -163,8 +164,6 @@
 volatile int pcic_speculative;
 volatile int pcic_trapped;
 
-static void pci_do_gettimeofday(struct timeval *tv);
-static int pci_do_settimeofday(struct timespec *tv);
 
 #define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
 
@@ -716,19 +715,27 @@
 #define USECS_PER_JIFFY  10000  /* We have 100HZ "standard" timer for sparc */
 #define TICK_TIMER_LIMIT ((100*1000000/4)/100)
 
+u32 pci_gettimeoffset(void)
+{
+	/*
+	 * We divide all by 100
+	 * to have microsecond resolution and to avoid overflow
+	 */
+	unsigned long count =
+	    readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
+	count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
+	return count * 1000;
+}
+
+
 void __init pci_time_init(void)
 {
 	struct linux_pcic *pcic = &pcic0;
 	unsigned long v;
 	int timer_irq, irq;
 
-	/* A hack until do_gettimeofday prototype is moved to arch specific headers
-	   and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */
-	((unsigned int *)do_gettimeofday)[0] = 
-	    0x10800000 | ((((unsigned long)pci_do_gettimeofday -
-	     (unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
-	((unsigned int *)do_gettimeofday)[1] = 0x01000000;
-	BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM);
+	do_arch_gettimeoffset = pci_gettimeoffset;
+
 	btfixup();
 
 	writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
@@ -746,84 +753,6 @@
 	local_irq_enable();
 }
 
-static inline unsigned long do_gettimeoffset(void)
-{
-	/*
-	 * We divide all by 100
-	 * to have microsecond resolution and to avoid overflow
-	 */
-	unsigned long count =
-	    readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
-	count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
-	return count;
-}
-
-static void pci_do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-	unsigned long max_ntp_tick = tick_usec - tickadj;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = do_gettimeoffset();
-
-		/*
-		 * If time_adjust is negative then NTP is slowing the clock
-		 * so make sure not to go into next possible interval.
-		 * Better to lose some accuracy than have time go backwards..
-		 */
-		if (unlikely(time_adjust < 0))
-			usec = min(usec, max_ntp_tick);
-
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / 1000);
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-static int pci_do_settimeofday(struct timespec *tv)
-{
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	tv->tv_nsec -= 1000 * do_gettimeoffset();
-	while (tv->tv_nsec < 0) {
-		tv->tv_nsec += NSEC_PER_SEC;
-		tv->tv_sec--;
-	}
-
-	wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
-	wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec;
-
-	if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
-		wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
-		wall_to_monotonic.tv_sec++;
-	}
-	if (wall_to_monotonic.tv_nsec < 0) {
-		wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
-		wall_to_monotonic.tv_sec--;
-	}
-
-	xtime.tv_sec = tv->tv_sec;
-	xtime.tv_nsec = tv->tv_nsec;
-	ntp_clear();
-	return 0;
-}
 
 #if 0
 static void watchdog_reset() {
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 198fb4e..e856456 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1,6 +1,6 @@
 /* Performance event support for sparc64.
  *
- * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2009, 2010 David S. Miller <davem@davemloft.net>
  *
  * This code is based almost entirely upon the x86 perf event
  * code, which is:
@@ -18,11 +18,15 @@
 #include <linux/kdebug.h>
 #include <linux/mutex.h>
 
+#include <asm/stacktrace.h>
 #include <asm/cpudata.h>
+#include <asm/uaccess.h>
 #include <asm/atomic.h>
 #include <asm/nmi.h>
 #include <asm/pcr.h>
 
+#include "kstack.h"
+
 /* Sparc64 chips have two performance counters, 32-bits each, with
  * overflow interrupts generated on transition from 0xffffffff to 0.
  * The counters are accessed in one go using a 64-bit register.
@@ -51,16 +55,49 @@
 
 #define PIC_UPPER_INDEX			0
 #define PIC_LOWER_INDEX			1
+#define PIC_NO_INDEX			-1
 
 struct cpu_hw_events {
-	struct perf_event	*events[MAX_HWEVENTS];
-	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
-	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+	/* Number of events currently scheduled onto this cpu.
+	 * This tells how many entries in the arrays below
+	 * are valid.
+	 */
+	int			n_events;
+
+	/* Number of new events added since the last hw_perf_disable().
+	 * This works because the perf event layer always adds new
+	 * events inside of a perf_{disable,enable}() sequence.
+	 */
+	int			n_added;
+
+	/* Array of events current scheduled on this cpu.  */
+	struct perf_event	*event[MAX_HWEVENTS];
+
+	/* Array of encoded longs, specifying the %pcr register
+	 * encoding and the mask of PIC counters this even can
+	 * be scheduled on.  See perf_event_encode() et al.
+	 */
+	unsigned long		events[MAX_HWEVENTS];
+
+	/* The current counter index assigned to an event.  When the
+	 * event hasn't been programmed into the cpu yet, this will
+	 * hold PIC_NO_INDEX.  The event->hw.idx value tells us where
+	 * we ought to schedule the event.
+	 */
+	int			current_idx[MAX_HWEVENTS];
+
+	/* Software copy of %pcr register on this cpu.  */
 	u64			pcr;
+
+	/* Enabled/disable state.  */
 	int			enabled;
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
 
+/* An event map describes the characteristics of a performance
+ * counter event.  In particular it gives the encoding as well as
+ * a mask telling which counters the event can be measured on.
+ */
 struct perf_event_map {
 	u16	encoding;
 	u8	pic_mask;
@@ -69,15 +106,20 @@
 #define PIC_LOWER	0x02
 };
 
+/* Encode a perf_event_map entry into a long.  */
 static unsigned long perf_event_encode(const struct perf_event_map *pmap)
 {
 	return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask;
 }
 
-static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk)
+static u8 perf_event_get_msk(unsigned long val)
 {
-	*msk = val & 0xff;
-	*enc = val >> 16;
+	return val & 0xff;
+}
+
+static u64 perf_event_get_enc(unsigned long val)
+{
+	return val >> 16;
 }
 
 #define C(x) PERF_COUNT_HW_CACHE_##x
@@ -491,53 +533,6 @@
 	pcr_ops->write(cpuc->pcr);
 }
 
-void hw_perf_enable(void)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	u64 val;
-	int i;
-
-	if (cpuc->enabled)
-		return;
-
-	cpuc->enabled = 1;
-	barrier();
-
-	val = cpuc->pcr;
-
-	for (i = 0; i < MAX_HWEVENTS; i++) {
-		struct perf_event *cp = cpuc->events[i];
-		struct hw_perf_event *hwc;
-
-		if (!cp)
-			continue;
-		hwc = &cp->hw;
-		val |= hwc->config_base;
-	}
-
-	cpuc->pcr = val;
-
-	pcr_ops->write(cpuc->pcr);
-}
-
-void hw_perf_disable(void)
-{
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	u64 val;
-
-	if (!cpuc->enabled)
-		return;
-
-	cpuc->enabled = 0;
-
-	val = cpuc->pcr;
-	val &= ~(PCR_UTRACE | PCR_STRACE |
-		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
-	cpuc->pcr = val;
-
-	pcr_ops->write(cpuc->pcr);
-}
-
 static u32 read_pmc(int idx)
 {
 	u64 val;
@@ -566,6 +561,30 @@
 	write_pic(pic);
 }
 
+static u64 sparc_perf_event_update(struct perf_event *event,
+				   struct hw_perf_event *hwc, int idx)
+{
+	int shift = 64 - 32;
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = read_pmc(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
 static int sparc_perf_event_set_period(struct perf_event *event,
 				       struct hw_perf_event *hwc, int idx)
 {
@@ -598,81 +617,166 @@
 	return ret;
 }
 
-static int sparc_pmu_enable(struct perf_event *event)
+/* If performance event entries have been added, move existing
+ * events around (if necessary) and then assign new entries to
+ * counters.
+ */
+static u64 maybe_change_configuration(struct cpu_hw_events *cpuc, u64 pcr)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
+	int i;
 
-	if (test_and_set_bit(idx, cpuc->used_mask))
-		return -EAGAIN;
+	if (!cpuc->n_added)
+		goto out;
 
-	sparc_pmu_disable_event(cpuc, hwc, idx);
+	/* Read in the counters which are moving.  */
+	for (i = 0; i < cpuc->n_events; i++) {
+		struct perf_event *cp = cpuc->event[i];
 
-	cpuc->events[idx] = event;
-	set_bit(idx, cpuc->active_mask);
+		if (cpuc->current_idx[i] != PIC_NO_INDEX &&
+		    cpuc->current_idx[i] != cp->hw.idx) {
+			sparc_perf_event_update(cp, &cp->hw,
+						cpuc->current_idx[i]);
+			cpuc->current_idx[i] = PIC_NO_INDEX;
+		}
+	}
 
-	sparc_perf_event_set_period(event, hwc, idx);
-	sparc_pmu_enable_event(cpuc, hwc, idx);
-	perf_event_update_userpage(event);
-	return 0;
+	/* Assign to counters all unassigned events.  */
+	for (i = 0; i < cpuc->n_events; i++) {
+		struct perf_event *cp = cpuc->event[i];
+		struct hw_perf_event *hwc = &cp->hw;
+		int idx = hwc->idx;
+		u64 enc;
+
+		if (cpuc->current_idx[i] != PIC_NO_INDEX)
+			continue;
+
+		sparc_perf_event_set_period(cp, hwc, idx);
+		cpuc->current_idx[i] = idx;
+
+		enc = perf_event_get_enc(cpuc->events[i]);
+		pcr |= event_encoding(enc, idx);
+	}
+out:
+	return pcr;
 }
 
-static u64 sparc_perf_event_update(struct perf_event *event,
-				   struct hw_perf_event *hwc, int idx)
+void hw_perf_enable(void)
 {
-	int shift = 64 - 32;
-	u64 prev_raw_count, new_raw_count;
-	s64 delta;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 pcr;
 
-again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
-	new_raw_count = read_pmc(idx);
+	if (cpuc->enabled)
+		return;
 
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
-			     new_raw_count) != prev_raw_count)
-		goto again;
+	cpuc->enabled = 1;
+	barrier();
 
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
+	pcr = cpuc->pcr;
+	if (!cpuc->n_events) {
+		pcr = 0;
+	} else {
+		pcr = maybe_change_configuration(cpuc, pcr);
 
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &hwc->period_left);
+		/* We require that all of the events have the same
+		 * configuration, so just fetch the settings from the
+		 * first entry.
+		 */
+		cpuc->pcr = pcr | cpuc->event[0]->hw.config_base;
+	}
 
-	return new_raw_count;
+	pcr_ops->write(cpuc->pcr);
+}
+
+void hw_perf_disable(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	cpuc->n_added = 0;
+
+	val = cpuc->pcr;
+	val &= ~(PCR_UTRACE | PCR_STRACE |
+		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
+	cpuc->pcr = val;
+
+	pcr_ops->write(cpuc->pcr);
 }
 
 static void sparc_pmu_disable(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
+	unsigned long flags;
+	int i;
 
-	clear_bit(idx, cpuc->active_mask);
-	sparc_pmu_disable_event(cpuc, hwc, idx);
+	local_irq_save(flags);
+	perf_disable();
 
-	barrier();
+	for (i = 0; i < cpuc->n_events; i++) {
+		if (event == cpuc->event[i]) {
+			int idx = cpuc->current_idx[i];
 
-	sparc_perf_event_update(event, hwc, idx);
-	cpuc->events[idx] = NULL;
-	clear_bit(idx, cpuc->used_mask);
+			/* Shift remaining entries down into
+			 * the existing slot.
+			 */
+			while (++i < cpuc->n_events) {
+				cpuc->event[i - 1] = cpuc->event[i];
+				cpuc->events[i - 1] = cpuc->events[i];
+				cpuc->current_idx[i - 1] =
+					cpuc->current_idx[i];
+			}
 
-	perf_event_update_userpage(event);
+			/* Absorb the final count and turn off the
+			 * event.
+			 */
+			sparc_pmu_disable_event(cpuc, hwc, idx);
+			barrier();
+			sparc_perf_event_update(event, hwc, idx);
+
+			perf_event_update_userpage(event);
+
+			cpuc->n_events--;
+			break;
+		}
+	}
+
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+static int active_event_index(struct cpu_hw_events *cpuc,
+			      struct perf_event *event)
+{
+	int i;
+
+	for (i = 0; i < cpuc->n_events; i++) {
+		if (cpuc->event[i] == event)
+			break;
+	}
+	BUG_ON(i == cpuc->n_events);
+	return cpuc->current_idx[i];
 }
 
 static void sparc_pmu_read(struct perf_event *event)
 {
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int idx = active_event_index(cpuc, event);
 	struct hw_perf_event *hwc = &event->hw;
 
-	sparc_perf_event_update(event, hwc, hwc->idx);
+	sparc_perf_event_update(event, hwc, idx);
 }
 
 static void sparc_pmu_unthrottle(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int idx = active_event_index(cpuc, event);
 	struct hw_perf_event *hwc = &event->hw;
 
-	sparc_pmu_enable_event(cpuc, hwc, hwc->idx);
+	sparc_pmu_enable_event(cpuc, hwc, idx);
 }
 
 static atomic_t active_events = ATOMIC_INIT(0);
@@ -750,43 +854,75 @@
 /* Make sure all events can be scheduled into the hardware at
  * the same time.  This is simplified by the fact that we only
  * need to support 2 simultaneous HW events.
+ *
+ * As a side effect, the evts[]->hw.idx values will be assigned
+ * on success.  These are pending indexes.  When the events are
+ * actually programmed into the chip, these values will propagate
+ * to the per-cpu cpuc->current_idx[] slots, see the code in
+ * maybe_change_configuration() for details.
  */
-static int sparc_check_constraints(unsigned long *events, int n_ev)
+static int sparc_check_constraints(struct perf_event **evts,
+				   unsigned long *events, int n_ev)
 {
-	if (n_ev <= perf_max_events) {
-		u8 msk1, msk2;
-		u16 dummy;
+	u8 msk0 = 0, msk1 = 0;
+	int idx0 = 0;
 
-		if (n_ev == 1)
-			return 0;
-		BUG_ON(n_ev != 2);
-		perf_event_decode(events[0], &dummy, &msk1);
-		perf_event_decode(events[1], &dummy, &msk2);
+	/* This case is possible when we are invoked from
+	 * hw_perf_group_sched_in().
+	 */
+	if (!n_ev)
+		return 0;
 
-		/* If both events can go on any counter, OK.  */
-		if (msk1 == (PIC_UPPER | PIC_LOWER) &&
-		    msk2 == (PIC_UPPER | PIC_LOWER))
-			return 0;
+	if (n_ev > perf_max_events)
+		return -1;
 
-		/* If one event is limited to a specific counter,
-		 * and the other can go on both, OK.
-		 */
-		if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
-		    msk2 == (PIC_UPPER | PIC_LOWER))
-			return 0;
-		if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) &&
-		    msk1 == (PIC_UPPER | PIC_LOWER))
-			return 0;
+	msk0 = perf_event_get_msk(events[0]);
+	if (n_ev == 1) {
+		if (msk0 & PIC_LOWER)
+			idx0 = 1;
+		goto success;
+	}
+	BUG_ON(n_ev != 2);
+	msk1 = perf_event_get_msk(events[1]);
 
-		/* If the events are fixed to different counters, OK.  */
-		if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) ||
-		    (msk1 == PIC_LOWER && msk2 == PIC_UPPER))
-			return 0;
+	/* If both events can go on any counter, OK.  */
+	if (msk0 == (PIC_UPPER | PIC_LOWER) &&
+	    msk1 == (PIC_UPPER | PIC_LOWER))
+		goto success;
 
-		/* Otherwise, there is a conflict.  */
+	/* If one event is limited to a specific counter,
+	 * and the other can go on both, OK.
+	 */
+	if ((msk0 == PIC_UPPER || msk0 == PIC_LOWER) &&
+	    msk1 == (PIC_UPPER | PIC_LOWER)) {
+		if (msk0 & PIC_LOWER)
+			idx0 = 1;
+		goto success;
 	}
 
+	if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
+	    msk0 == (PIC_UPPER | PIC_LOWER)) {
+		if (msk1 & PIC_UPPER)
+			idx0 = 1;
+		goto success;
+	}
+
+	/* If the events are fixed to different counters, OK.  */
+	if ((msk0 == PIC_UPPER && msk1 == PIC_LOWER) ||
+	    (msk0 == PIC_LOWER && msk1 == PIC_UPPER)) {
+		if (msk0 & PIC_LOWER)
+			idx0 = 1;
+		goto success;
+	}
+
+	/* Otherwise, there is a conflict.  */
 	return -1;
+
+success:
+	evts[0]->hw.idx = idx0;
+	if (n_ev == 2)
+		evts[1]->hw.idx = idx0 ^ 1;
+	return 0;
 }
 
 static int check_excludes(struct perf_event **evts, int n_prev, int n_new)
@@ -818,7 +954,8 @@
 }
 
 static int collect_events(struct perf_event *group, int max_count,
-			  struct perf_event *evts[], unsigned long *events)
+			  struct perf_event *evts[], unsigned long *events,
+			  int *current_idx)
 {
 	struct perf_event *event;
 	int n = 0;
@@ -827,7 +964,8 @@
 		if (n >= max_count)
 			return -1;
 		evts[n] = group;
-		events[n++] = group->hw.event_base;
+		events[n] = group->hw.event_base;
+		current_idx[n++] = PIC_NO_INDEX;
 	}
 	list_for_each_entry(event, &group->sibling_list, group_entry) {
 		if (!is_software_event(event) &&
@@ -835,20 +973,100 @@
 			if (n >= max_count)
 				return -1;
 			evts[n] = event;
-			events[n++] = event->hw.event_base;
+			events[n] = event->hw.event_base;
+			current_idx[n++] = PIC_NO_INDEX;
 		}
 	}
 	return n;
 }
 
+static void event_sched_in(struct perf_event *event, int cpu)
+{
+	event->state = PERF_EVENT_STATE_ACTIVE;
+	event->oncpu = cpu;
+	event->tstamp_running += event->ctx->time - event->tstamp_stopped;
+	if (is_software_event(event))
+		event->pmu->enable(event);
+}
+
+int hw_perf_group_sched_in(struct perf_event *group_leader,
+			   struct perf_cpu_context *cpuctx,
+			   struct perf_event_context *ctx, int cpu)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct perf_event *sub;
+	int n0, n;
+
+	if (!sparc_pmu)
+		return 0;
+
+	n0 = cpuc->n_events;
+	n = collect_events(group_leader, perf_max_events - n0,
+			   &cpuc->event[n0], &cpuc->events[n0],
+			   &cpuc->current_idx[n0]);
+	if (n < 0)
+		return -EAGAIN;
+	if (check_excludes(cpuc->event, n0, n))
+		return -EINVAL;
+	if (sparc_check_constraints(cpuc->event, cpuc->events, n + n0))
+		return -EAGAIN;
+	cpuc->n_events = n0 + n;
+	cpuc->n_added += n;
+
+	cpuctx->active_oncpu += n;
+	n = 1;
+	event_sched_in(group_leader, cpu);
+	list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
+		if (sub->state != PERF_EVENT_STATE_OFF) {
+			event_sched_in(sub, cpu);
+			n++;
+		}
+	}
+	ctx->nr_active += n;
+
+	return 1;
+}
+
+static int sparc_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int n0, ret = -EAGAIN;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	perf_disable();
+
+	n0 = cpuc->n_events;
+	if (n0 >= perf_max_events)
+		goto out;
+
+	cpuc->event[n0] = event;
+	cpuc->events[n0] = event->hw.event_base;
+	cpuc->current_idx[n0] = PIC_NO_INDEX;
+
+	if (check_excludes(cpuc->event, n0, 1))
+		goto out;
+	if (sparc_check_constraints(cpuc->event, cpuc->events, n0 + 1))
+		goto out;
+
+	cpuc->n_events++;
+	cpuc->n_added++;
+
+	ret = 0;
+out:
+	perf_enable();
+	local_irq_restore(flags);
+	return ret;
+}
+
 static int __hw_perf_event_init(struct perf_event *event)
 {
 	struct perf_event_attr *attr = &event->attr;
 	struct perf_event *evts[MAX_HWEVENTS];
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned long events[MAX_HWEVENTS];
+	int current_idx_dmy[MAX_HWEVENTS];
 	const struct perf_event_map *pmap;
-	u64 enc;
 	int n;
 
 	if (atomic_read(&nmi_active) < 0)
@@ -865,10 +1083,7 @@
 	} else
 		return -EOPNOTSUPP;
 
-	/* We save the enable bits in the config_base.  So to
-	 * turn off sampling just write 'config', and to enable
-	 * things write 'config | config_base'.
-	 */
+	/* We save the enable bits in the config_base.  */
 	hwc->config_base = sparc_pmu->irq_bit;
 	if (!attr->exclude_user)
 		hwc->config_base |= PCR_UTRACE;
@@ -879,13 +1094,11 @@
 
 	hwc->event_base = perf_event_encode(pmap);
 
-	enc = pmap->encoding;
-
 	n = 0;
 	if (event->group_leader != event) {
 		n = collect_events(event->group_leader,
 				   perf_max_events - 1,
-				   evts, events);
+				   evts, events, current_idx_dmy);
 		if (n < 0)
 			return -EINVAL;
 	}
@@ -895,9 +1108,11 @@
 	if (check_excludes(evts, n, 1))
 		return -EINVAL;
 
-	if (sparc_check_constraints(events, n + 1))
+	if (sparc_check_constraints(evts, events, n + 1))
 		return -EINVAL;
 
+	hwc->idx = PIC_NO_INDEX;
+
 	/* Try to do all error checking before this point, as unwinding
 	 * state after grabbing the PMC is difficult.
 	 */
@@ -910,15 +1125,6 @@
 		atomic64_set(&hwc->period_left, hwc->sample_period);
 	}
 
-	if (pmap->pic_mask & PIC_UPPER) {
-		hwc->idx = PIC_UPPER_INDEX;
-		enc <<= sparc_pmu->upper_shift;
-	} else {
-		hwc->idx = PIC_LOWER_INDEX;
-		enc <<= sparc_pmu->lower_shift;
-	}
-
-	hwc->config |= enc;
 	return 0;
 }
 
@@ -968,7 +1174,7 @@
 	struct perf_sample_data data;
 	struct cpu_hw_events *cpuc;
 	struct pt_regs *regs;
-	int idx;
+	int i;
 
 	if (!atomic_read(&active_events))
 		return NOTIFY_DONE;
@@ -997,13 +1203,12 @@
 	if (sparc_pmu->irq_bit)
 		pcr_ops->write(cpuc->pcr);
 
-	for (idx = 0; idx < MAX_HWEVENTS; idx++) {
-		struct perf_event *event = cpuc->events[idx];
+	for (i = 0; i < cpuc->n_events; i++) {
+		struct perf_event *event = cpuc->event[i];
+		int idx = cpuc->current_idx[i];
 		struct hw_perf_event *hwc;
 		u64 val;
 
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
 		hwc = &event->hw;
 		val = sparc_perf_event_update(event, hwc, idx);
 		if (val & (1ULL << 31))
@@ -1055,10 +1260,122 @@
 
 	pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
 
-	/* All sparc64 PMUs currently have 2 events.  But this simple
-	 * driver only supports one active event at a time.
-	 */
-	perf_max_events = 1;
+	/* All sparc64 PMUs currently have 2 events.  */
+	perf_max_events = 2;
 
 	register_die_notifier(&perf_event_nmi_notifier);
 }
+
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+	if (entry->nr < PERF_MAX_STACK_DEPTH)
+		entry->ip[entry->nr++] = ip;
+}
+
+static void perf_callchain_kernel(struct pt_regs *regs,
+				  struct perf_callchain_entry *entry)
+{
+	unsigned long ksp, fp;
+
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	callchain_store(entry, regs->tpc);
+
+	ksp = regs->u_regs[UREG_I6];
+	fp = ksp + STACK_BIAS;
+	do {
+		struct sparc_stackf *sf;
+		struct pt_regs *regs;
+		unsigned long pc;
+
+		if (!kstack_valid(current_thread_info(), fp))
+			break;
+
+		sf = (struct sparc_stackf *) fp;
+		regs = (struct pt_regs *) (sf + 1);
+
+		if (kstack_is_trap_frame(current_thread_info(), regs)) {
+			if (user_mode(regs))
+				break;
+			pc = regs->tpc;
+			fp = regs->u_regs[UREG_I6] + STACK_BIAS;
+		} else {
+			pc = sf->callers_pc;
+			fp = (unsigned long)sf->fp + STACK_BIAS;
+		}
+		callchain_store(entry, pc);
+	} while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+static void perf_callchain_user_64(struct pt_regs *regs,
+				   struct perf_callchain_entry *entry)
+{
+	unsigned long ufp;
+
+	callchain_store(entry, PERF_CONTEXT_USER);
+	callchain_store(entry, regs->tpc);
+
+	ufp = regs->u_regs[UREG_I6] + STACK_BIAS;
+	do {
+		struct sparc_stackf *usf, sf;
+		unsigned long pc;
+
+		usf = (struct sparc_stackf *) ufp;
+		if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+			break;
+
+		pc = sf.callers_pc;
+		ufp = (unsigned long)sf.fp + STACK_BIAS;
+		callchain_store(entry, pc);
+	} while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+static void perf_callchain_user_32(struct pt_regs *regs,
+				   struct perf_callchain_entry *entry)
+{
+	unsigned long ufp;
+
+	callchain_store(entry, PERF_CONTEXT_USER);
+	callchain_store(entry, regs->tpc);
+
+	ufp = regs->u_regs[UREG_I6];
+	do {
+		struct sparc_stackf32 *usf, sf;
+		unsigned long pc;
+
+		usf = (struct sparc_stackf32 *) ufp;
+		if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+			break;
+
+		pc = sf.callers_pc;
+		ufp = (unsigned long)sf.fp;
+		callchain_store(entry, pc);
+	} while (entry->nr < PERF_MAX_STACK_DEPTH);
+}
+
+/* Like powerpc we can't get PMU interrupts within the PMU handler,
+ * so no need for seperate NMI and IRQ chains as on x86.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+	entry->nr = 0;
+	if (!user_mode(regs)) {
+		stack_trace_flush();
+		perf_callchain_kernel(regs, entry);
+		if (current->mm)
+			regs = task_pt_regs(current);
+		else
+			regs = NULL;
+	}
+	if (regs) {
+		flushw_user();
+		if (test_thread_flag(TIF_32BIT))
+			perf_callchain_user_32(regs, entry);
+		else
+			perf_callchain_user_64(regs, entry);
+	}
+	return entry;
+}
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 2830b41..c49865b 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -526,7 +526,7 @@
 			 * Set some valid stack frames to give to the child.
 			 */
 			childstack = (struct sparc_stackf __user *)
-				(sp & ~0x7UL);
+				(sp & ~0xfUL);
 			parentstack = (struct sparc_stackf __user *)
 				regs->u_regs[UREG_FP];
 
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 18d6785..cb70476 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -365,14 +365,6 @@
 	struct thread_info *t = current_thread_info();
 	struct mm_struct *mm;
 
-	if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
-		clear_ti_thread_flag(t, TIF_ABI_PENDING);
-		if (test_ti_thread_flag(t, TIF_32BIT))
-			clear_ti_thread_flag(t, TIF_32BIT);
-		else
-			set_ti_thread_flag(t, TIF_32BIT);
-	}
-
 	mm = t->task->mm;
 	if (mm)
 		tsb_context_switch(mm);
@@ -406,11 +398,11 @@
 	} else
 		__get_user(fp, &(((struct reg_window32 __user *)psp)->ins[6]));
 
-	/* Now 8-byte align the stack as this is mandatory in the
-	 * Sparc ABI due to how register windows work.  This hides
-	 * the restriction from thread libraries etc.  -DaveM
+	/* Now align the stack as this is mandatory in the Sparc ABI
+	 * due to how register windows work.  This hides the
+	 * restriction from thread libraries etc.
 	 */
-	csp &= ~7UL;
+	csp &= ~15UL;
 
 	distance = fp - psp;
 	rval = (csp - distance);
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index ba5b09a..ea22cd3 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -120,8 +120,8 @@
 };
 
 /* Align macros */
-#define SF_ALIGNEDSZ  (((sizeof(struct signal_frame32) + 7) & (~7)))
-#define RT_ALIGNEDSZ  (((sizeof(struct rt_signal_frame32) + 7) & (~7)))
+#define SF_ALIGNEDSZ  (((sizeof(struct signal_frame32) + 15) & (~15)))
+#define RT_ALIGNEDSZ  (((sizeof(struct rt_signal_frame32) + 15) & (~15)))
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
 {
@@ -420,15 +420,17 @@
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
+	sp -= framesize;
+
 	/* Always align the stack frame.  This handles two cases.  First,
 	 * sigaltstack need not be mindful of platform specific stack
 	 * alignment.  Second, if we took this signal because the stack
 	 * is not aligned properly, we'd like to take the signal cleanly
 	 * and report that.
 	 */
-	sp &= ~7UL;
+	sp &= ~15UL;
 
-	return (void __user *)(sp - framesize);
+	return (void __user *) sp;
 }
 
 static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 7ce1a10..9882df9 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -267,15 +267,17 @@
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
+	sp -= framesize;
+
 	/* Always align the stack frame.  This handles two cases.  First,
 	 * sigaltstack need not be mindful of platform specific stack
 	 * alignment.  Second, if we took this signal because the stack
 	 * is not aligned properly, we'd like to take the signal cleanly
 	 * and report that.
 	 */
-	sp &= ~7UL;
+	sp &= ~15UL;
 
-	return (void __user *)(sp - framesize);
+	return (void __user *) sp;
 }
 
 static inline int
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 647afbd..9fa48c3 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -353,7 +353,7 @@
 /* Checks if the fp is valid */
 static int invalid_frame_pointer(void __user *fp, int fplen)
 {
-	if (((unsigned long) fp) & 7)
+	if (((unsigned long) fp) & 15)
 		return 1;
 	return 0;
 }
@@ -396,15 +396,17 @@
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
+	sp -= framesize;
+
 	/* Always align the stack frame.  This handles two cases.  First,
 	 * sigaltstack need not be mindful of platform specific stack
 	 * alignment.  Second, if we took this signal because the stack
 	 * is not aligned properly, we'd like to take the signal cleanly
 	 * and report that.
 	 */
-	sp &= ~7UL;
+	sp &= ~15UL;
 
-	return (void __user *)(sp - framesize);
+	return (void __user *) sp;
 }
 
 static inline void
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index cfa0e19..d77f543 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -365,6 +365,7 @@
 void arch_pick_mmap_layout(struct mm_struct *mm)
 {
 	unsigned long random_factor = 0UL;
+	unsigned long gap;
 
 	if (current->flags & PF_RANDOMIZE) {
 		random_factor = get_random_int();
@@ -379,9 +380,10 @@
 	 * Fall back to the standard layout if the personality
 	 * bit is set, or if the expected stack growth is unlimited:
 	 */
+	gap = rlimit(RLIMIT_STACK);
 	if (!test_thread_flag(TIF_32BIT) ||
 	    (current->personality & ADDR_COMPAT_LAYOUT) ||
-	    current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY ||
+	    gap == RLIM_INFINITY ||
 	    sysctl_legacy_va_layout) {
 		mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
 		mm->get_unmapped_area = arch_get_unmapped_area;
@@ -389,9 +391,7 @@
 	} else {
 		/* We know it's 32-bit */
 		unsigned long task_size = STACK_TOP32;
-		unsigned long gap;
 
-		gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
 		if (gap < 128 * 1024 * 1024)
 			gap = 128 * 1024 * 1024;
 		if (gap > (task_size / 6 * 5))
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 5b2f595..0d4c09b 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -35,6 +35,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/oplib.h>
+#include <asm/timex.h>
 #include <asm/timer.h>
 #include <asm/system.h>
 #include <asm/irq.h>
@@ -51,7 +52,6 @@
 EXPORT_SYMBOL(rtc_lock);
 
 static int set_rtc_mmss(unsigned long);
-static int sbus_do_settimeofday(struct timespec *tv);
 
 unsigned long profile_pc(struct pt_regs *regs)
 {
@@ -76,6 +76,8 @@
 
 __volatile__ unsigned int *master_l10_counter;
 
+u32 (*do_arch_gettimeoffset)(void);
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -196,17 +198,37 @@
 {
 	return of_register_driver(&clock_driver, &of_platform_bus_type);
 }
-
 /* Must be after subsys_initcall() so that busses are probed.  Must
  * be before device_initcall() because things like the RTC driver
  * need to see the clock registers.
  */
 fs_initcall(clock_init);
 
+
+u32 sbus_do_gettimeoffset(void)
+{
+	unsigned long val = *master_l10_counter;
+	unsigned long usec = (val >> 10) & 0x1fffff;
+
+	/* Limit hit?  */
+	if (val & 0x80000000)
+		usec += 1000000 / HZ;
+
+	return usec * 1000;
+}
+
+
+u32 arch_gettimeoffset(void)
+{
+	if (unlikely(!do_arch_gettimeoffset))
+		return 0;
+	return do_arch_gettimeoffset();
+}
+
 static void __init sbus_time_init(void)
 {
+	do_arch_gettimeoffset = sbus_do_gettimeoffset;
 
-	BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
 	btfixup();
 
 	sparc_init_timers(timer_interrupt);
@@ -224,94 +246,6 @@
 	sbus_time_init();
 }
 
-static inline unsigned long do_gettimeoffset(void)
-{
-	unsigned long val = *master_l10_counter;
-	unsigned long usec = (val >> 10) & 0x1fffff;
-
-	/* Limit hit?  */
-	if (val & 0x80000000)
-		usec += 1000000 / HZ;
-
-	return usec;
-}
-
-/* Ok, my cute asm atomicity trick doesn't work anymore.
- * There are just too many variables that need to be protected
- * now (both members of xtime, et al.)
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-	unsigned long max_ntp_tick = tick_usec - tickadj;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = do_gettimeoffset();
-
-		/*
-		 * If time_adjust is negative then NTP is slowing the clock
-		 * so make sure not to go into next possible interval.
-		 * Better to lose some accuracy than have time go backwards..
-		 */
-		if (unlikely(time_adjust < 0))
-			usec = min(usec, max_ntp_tick);
-
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / 1000);
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	int ret;
-
-	write_seqlock_irq(&xtime_lock);
-	ret = bus_do_settimeofday(tv);
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return ret;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-static int sbus_do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= 1000 * do_gettimeoffset();
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	return 0;
-}
 
 static int set_rtc_mmss(unsigned long secs)
 {
diff --git a/arch/sparc/kernel/tsb.S b/arch/sparc/kernel/tsb.S
index 8c91d9b..db15d12 100644
--- a/arch/sparc/kernel/tsb.S
+++ b/arch/sparc/kernel/tsb.S
@@ -191,10 +191,12 @@
 
 tsb_itlb_load:
 	/* Executable bit must be set.  */
-661:	andcc		%g5, _PAGE_EXEC_4U, %g0
-	.section	.sun4v_1insn_patch, "ax"
+661:	sethi		%hi(_PAGE_EXEC_4U), %g4
+	andcc		%g5, %g4, %g0
+	.section	.sun4v_2insn_patch, "ax"
 	.word		661b
 	andcc		%g5, _PAGE_EXEC_4V, %g0
+	nop
 	.previous
 
 	be,pn		%xcc, tsb_do_fault
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index b99f81c..a3413ac 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -18,6 +18,7 @@
 #include <linux/signal.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/perf_event.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kdebug.h>
@@ -203,6 +204,8 @@
         if (in_atomic() || !mm)
                 goto no_context;
 
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	down_read(&mm->mmap_sem);
 
 	/*
@@ -249,10 +252,15 @@
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		current->maj_flt++;
-	else
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+			      regs, address);
+	} else {
 		current->min_flt++;
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+			      regs, address);
+	}
 	up_read(&mm->mmap_sem);
 	return;
 
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 6081936..b9d4ff0 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/perf_event.h>
 #include <linux/interrupt.h>
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
@@ -296,6 +297,8 @@
 	if (in_atomic() || !mm)
 		goto intr_or_no_mm;
 
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	if (!down_read_trylock(&mm->mmap_sem)) {
 		if ((regs->tstate & TSTATE_PRIV) &&
 		    !search_exception_tables(regs->tpc)) {
@@ -400,11 +403,15 @@
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		current->maj_flt++;
-	else
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+			      regs, address);
+	} else {
 		current->min_flt++;
-
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+			      regs, address);
+	}
 	up_read(&mm->mmap_sem);
 
 	mm_rss = get_mm_rss(mm);
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 5106924..3b3c366 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -125,50 +125,36 @@
 void mconsole_proc(struct mc_request *req)
 {
 	struct nameidata nd;
-	struct file_system_type *proc;
-	struct super_block *super;
+	struct vfsmount *mnt = current->nsproxy->pid_ns->proc_mnt;
 	struct file *file;
 	int n, err;
 	char *ptr = req->request.data, *buf;
+	mm_segment_t old_fs = get_fs();
 
 	ptr += strlen("proc");
 	ptr = skip_spaces(ptr);
 
-	proc = get_fs_type("proc");
-	if (proc == NULL) {
-		mconsole_reply(req, "procfs not registered", 1, 0);
-		goto out;
-	}
-
-	super = (*proc->get_sb)(proc, 0, NULL, NULL);
-	put_filesystem(proc);
-	if (super == NULL) {
-		mconsole_reply(req, "Failed to get procfs superblock", 1, 0);
-		goto out;
-	}
-	up_write(&super->s_umount);
-
-	nd.path.dentry = super->s_root;
-	nd.path.mnt = NULL;
-	nd.flags = O_RDONLY + 1;
-	nd.last_type = LAST_ROOT;
-
-	/* START: it was experienced that the stability problems are closed
-	 * if commenting out these two calls + the below read cycle. To
-	 * make UML crash again, it was enough to readd either one.*/
-	err = link_path_walk(ptr, &nd);
+	err = vfs_path_lookup(mnt->mnt_root, mnt, ptr, LOOKUP_FOLLOW, &nd);
 	if (err) {
 		mconsole_reply(req, "Failed to look up file", 1, 0);
-		goto out_kill;
+		goto out;
+	}
+
+	err = may_open(&nd.path, MAY_READ, FMODE_READ);
+	if (result) {
+		mconsole_reply(req, "Failed to open file", 1, 0);
+		path_put(&nd.path);
+		goto out;
 	}
 
 	file = dentry_open(nd.path.dentry, nd.path.mnt, O_RDONLY,
 			   current_cred());
+	err = PTR_ERR(file);
 	if (IS_ERR(file)) {
 		mconsole_reply(req, "Failed to open file", 1, 0);
-		goto out_kill;
+		path_put(&nd.path);
+		goto out;
 	}
-	/*END*/
 
 	buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (buf == NULL) {
@@ -176,10 +162,13 @@
 		goto out_fput;
 	}
 
-	if ((file->f_op != NULL) && (file->f_op->read != NULL)) {
+	if (file->f_op->read) {
 		do {
-			n = (*file->f_op->read)(file, buf, PAGE_SIZE - 1,
-						&file->f_pos);
+			loff_t pos;
+			set_fs(KERNEL_DS);
+			n = vfs_read(file, buf, PAGE_SIZE - 1, &pos);
+			file_pos_write(file, pos);
+			set_fs(old_fs);
 			if (n >= 0) {
 				buf[n] = '\0';
 				mconsole_reply(req, buf, 0, (n > 0));
@@ -197,8 +186,6 @@
 	kfree(buf);
  out_fput:
 	fput(file);
- out_kill:
-	deactivate_super(super);
  out: ;
 }
 #endif
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cbcbfde..eb40925 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -989,12 +989,6 @@
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
 	  /dev/cpu/31/cpuid.
 
-config X86_CPU_DEBUG
-	tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
-	---help---
-	  If you select this option, this will provide various x86 CPUs
-	  information through debugfs.
-
 choice
 	prompt "High Memory Support"
 	default HIGHMEM4G if !X86_NUMAQ
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 2a4d073..f9f4724 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -308,14 +308,15 @@
 	if (retval)
 		return retval;
 
-	regs->cs = __USER32_CS;
-	regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
-		regs->r13 = regs->r14 = regs->r15 = 0;
-
 	/* OK, This is the point of no return */
 	set_personality(PER_LINUX);
 	set_thread_flag(TIF_IA32);
-	clear_thread_flag(TIF_ABI_PENDING);
+
+	setup_new_exec(bprm);
+
+	regs->cs = __USER32_CS;
+	regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 =
+		regs->r13 = regs->r14 = regs->r15 = 0;
 
 	current->mm->end_code = ex.a_text +
 		(current->mm->start_code = N_TXTADDR(ex));
diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
index 4d817f9..d2544f1 100644
--- a/arch/x86/include/asm/amd_iommu_proto.h
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -31,6 +31,7 @@
 extern int amd_iommu_init_devices(void);
 extern void amd_iommu_uninit_devices(void);
 extern void amd_iommu_init_notifier(void);
+extern void amd_iommu_init_api(void);
 #ifndef CONFIG_AMD_IOMMU_STATS
 
 static inline void amd_iommu_stats_init(void) { }
diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h
deleted file mode 100644
index d96c1ee..0000000
--- a/arch/x86/include/asm/cpu_debug.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _ASM_X86_CPU_DEBUG_H
-#define _ASM_X86_CPU_DEBUG_H
-
-/*
- * CPU x86 architecture debug
- *
- * Copyright(C) 2009 Jaswinder Singh Rajput
- */
-
-/* Register flags */
-enum cpu_debug_bit {
-/* Model Specific Registers (MSRs)					*/
-	CPU_MC_BIT,				/* Machine Check	*/
-	CPU_MONITOR_BIT,			/* Monitor		*/
-	CPU_TIME_BIT,				/* Time			*/
-	CPU_PMC_BIT,				/* Performance Monitor	*/
-	CPU_PLATFORM_BIT,			/* Platform		*/
-	CPU_APIC_BIT,				/* APIC			*/
-	CPU_POWERON_BIT,			/* Power-on		*/
-	CPU_CONTROL_BIT,			/* Control		*/
-	CPU_FEATURES_BIT,			/* Features control	*/
-	CPU_LBRANCH_BIT,			/* Last Branch		*/
-	CPU_BIOS_BIT,				/* BIOS			*/
-	CPU_FREQ_BIT,				/* Frequency		*/
-	CPU_MTTR_BIT,				/* MTRR			*/
-	CPU_PERF_BIT,				/* Performance		*/
-	CPU_CACHE_BIT,				/* Cache		*/
-	CPU_SYSENTER_BIT,			/* Sysenter		*/
-	CPU_THERM_BIT,				/* Thermal		*/
-	CPU_MISC_BIT,				/* Miscellaneous	*/
-	CPU_DEBUG_BIT,				/* Debug		*/
-	CPU_PAT_BIT,				/* PAT			*/
-	CPU_VMX_BIT,				/* VMX			*/
-	CPU_CALL_BIT,				/* System Call		*/
-	CPU_BASE_BIT,				/* BASE Address		*/
-	CPU_VER_BIT,				/* Version ID		*/
-	CPU_CONF_BIT,				/* Configuration	*/
-	CPU_SMM_BIT,				/* System mgmt mode	*/
-	CPU_SVM_BIT,				/*Secure Virtual Machine*/
-	CPU_OSVM_BIT,				/* OS-Visible Workaround*/
-/* Standard Registers							*/
-	CPU_TSS_BIT,				/* Task Stack Segment	*/
-	CPU_CR_BIT,				/* Control Registers	*/
-	CPU_DT_BIT,				/* Descriptor Table	*/
-/* End of Registers flags						*/
-	CPU_REG_ALL_BIT,			/* Select all Registers	*/
-};
-
-#define	CPU_REG_ALL		(~0)		/* Select all Registers	*/
-
-#define	CPU_MC			(1 << CPU_MC_BIT)
-#define	CPU_MONITOR		(1 << CPU_MONITOR_BIT)
-#define	CPU_TIME		(1 << CPU_TIME_BIT)
-#define	CPU_PMC			(1 << CPU_PMC_BIT)
-#define	CPU_PLATFORM		(1 << CPU_PLATFORM_BIT)
-#define	CPU_APIC		(1 << CPU_APIC_BIT)
-#define	CPU_POWERON		(1 << CPU_POWERON_BIT)
-#define	CPU_CONTROL		(1 << CPU_CONTROL_BIT)
-#define	CPU_FEATURES		(1 << CPU_FEATURES_BIT)
-#define	CPU_LBRANCH		(1 << CPU_LBRANCH_BIT)
-#define	CPU_BIOS		(1 << CPU_BIOS_BIT)
-#define	CPU_FREQ		(1 << CPU_FREQ_BIT)
-#define	CPU_MTRR		(1 << CPU_MTTR_BIT)
-#define	CPU_PERF		(1 << CPU_PERF_BIT)
-#define	CPU_CACHE		(1 << CPU_CACHE_BIT)
-#define	CPU_SYSENTER		(1 << CPU_SYSENTER_BIT)
-#define	CPU_THERM		(1 << CPU_THERM_BIT)
-#define	CPU_MISC		(1 << CPU_MISC_BIT)
-#define	CPU_DEBUG		(1 << CPU_DEBUG_BIT)
-#define	CPU_PAT			(1 << CPU_PAT_BIT)
-#define	CPU_VMX			(1 << CPU_VMX_BIT)
-#define	CPU_CALL		(1 << CPU_CALL_BIT)
-#define	CPU_BASE		(1 << CPU_BASE_BIT)
-#define	CPU_VER			(1 << CPU_VER_BIT)
-#define	CPU_CONF		(1 << CPU_CONF_BIT)
-#define	CPU_SMM			(1 << CPU_SMM_BIT)
-#define	CPU_SVM			(1 << CPU_SVM_BIT)
-#define	CPU_OSVM		(1 << CPU_OSVM_BIT)
-#define	CPU_TSS			(1 << CPU_TSS_BIT)
-#define	CPU_CR			(1 << CPU_CR_BIT)
-#define	CPU_DT			(1 << CPU_DT_BIT)
-
-/* Register file flags */
-enum cpu_file_bit {
-	CPU_INDEX_BIT,				/* index		*/
-	CPU_VALUE_BIT,				/* value		*/
-};
-
-#define	CPU_FILE_VALUE		(1 << CPU_VALUE_BIT)
-
-#define MAX_CPU_FILES		512
-
-struct cpu_private {
-	unsigned		cpu;
-	unsigned		type;
-	unsigned		reg;
-	unsigned		file;
-};
-
-struct cpu_debug_base {
-	char			*name;		/* Register name	*/
-	unsigned		flag;		/* Register flag	*/
-	unsigned		write;		/* Register write flag	*/
-};
-
-/*
- * Currently it looks similar to cpu_debug_base but once we add more files
- * cpu_file_base will go in different direction
- */
-struct cpu_file_base {
-	char			*name;		/* Register file name	*/
-	unsigned		flag;		/* Register file flag	*/
-	unsigned		write;		/* Register write flag	*/
-};
-
-struct cpu_cpuX_base {
-	struct dentry		*dentry;	/* Register dentry	*/
-	int			init;		/* Register index file	*/
-};
-
-struct cpu_debug_range {
-	unsigned		min;		/* Register range min	*/
-	unsigned		max;		/* Register range max	*/
-	unsigned		flag;		/* Supported flags	*/
-};
-
-#endif /* _ASM_X86_CPU_DEBUG_H */
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index b4501ee..f2ad216 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -170,10 +170,7 @@
 }
 
 #define ELF_PLAT_INIT(_r, load_addr)			\
-do {							\
-	elf_common_init(&current->thread, _r, 0);	\
-	clear_thread_flag(TIF_IA32);			\
-} while (0)
+	elf_common_init(&current->thread, _r, 0)
 
 #define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
 	elf_common_init(&current->thread, regs, __USER_DS)
@@ -181,14 +178,8 @@
 void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp);
 #define compat_start_thread start_thread_ia32
 
-#define COMPAT_SET_PERSONALITY(ex)			\
-do {							\
-	if (test_thread_flag(TIF_IA32))			\
-		clear_thread_flag(TIF_ABI_PENDING);	\
-	else						\
-		set_thread_flag(TIF_ABI_PENDING);	\
-	current->personality |= force_personality32;	\
-} while (0)
+void set_personality_ia32(void);
+#define COMPAT_SET_PERSONALITY(ex) set_personality_ia32()
 
 #define COMPAT_ELF_PLATFORM			("i686")
 
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index 5d89fd2..1d5c08a 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -67,6 +67,7 @@
 extern unsigned long force_hpet_address;
 extern u8 hpet_blockid;
 extern int hpet_force_user;
+extern u8 hpet_msi_disable;
 extern int is_hpet_enabled(void);
 extern int hpet_enable(void);
 extern void hpet_disable(void);
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 858baa0..6c3fdd6 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -108,10 +108,11 @@
 #define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
 #define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
 
-extern struct atomic_notifier_head x86_mce_decoder_chain;
 
 #ifdef __KERNEL__
 
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
 #include <linux/percpu.h>
 #include <linux/init.h>
 #include <asm/atomic.h>
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index c24ca9a..ef51b50 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -12,8 +12,6 @@
 enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
 
 struct microcode_ops {
-	void (*init)(struct device *device);
-	void (*fini)(void);
 	enum ucode_state (*request_microcode_user) (int cpu,
 				const void __user *buf, size_t size);
 
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 8d9f854..1380367 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -19,6 +19,7 @@
 #define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
 
 #define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_ANY			  (1 << 21)
 #define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
 #define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)
 #define ARCH_PERFMON_EVENTSEL_USR			  (1 << 16)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index fc801ba..b753ea5 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -450,6 +450,8 @@
 	struct perf_event	*ptrace_bps[HBP_NUM];
 	/* Debug status used for traps, single steps, etc... */
 	unsigned long           debugreg6;
+	/* Keep track of the exact dr7 value set by the user */
+	unsigned long           ptrace_dr7;
 	/* Fault info: */
 	unsigned long		cr2;
 	unsigned long		trap_no;
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index ecb544e..e04740f 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -11,9 +11,9 @@
 #include <linux/irqflags.h>
 
 /* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
+#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
 # define AT_VECTOR_SIZE_ARCH 2
-#else
+#else /* else it's non-compat x86-64 */
 # define AT_VECTOR_SIZE_ARCH 1
 #endif
 
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 375c917..e0d2890 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -87,7 +87,6 @@
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* 32bit process */
 #define TIF_FORK		18	/* ret_from_fork */
-#define TIF_ABI_PENDING		19
 #define TIF_MEMDIE		20
 #define TIF_DEBUG		21	/* uses debug registers */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
@@ -112,7 +111,6 @@
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
-#define _TIF_ABI_PENDING	(1 << TIF_ABI_PENDING)
 #define _TIF_DEBUG		(1 << TIF_DEBUG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index bc54fa9..40be813 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -495,5 +495,17 @@
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
 
+/*
+ * Get the minimum revision number of the hub chips within the partition.
+ *     1 - initial rev 1.0 silicon
+ *     2 - rev 2.0 production silicon
+ */
+static inline int uv_get_min_hub_revision_id(void)
+{
+	extern int uv_min_hub_revision_id;
+
+	return uv_min_hub_revision_id;
+}
+
 #endif /* CONFIG_X86_64 */
 #endif /* _ASM_X86_UV_UV_HUB_H */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index fb1035c..af1c583 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1185,9 +1185,6 @@
 		if (!error) {
 			acpi_lapic = 1;
 
-#ifdef CONFIG_X86_BIGSMP
-			generic_bigsmp_probe();
-#endif
 			/*
 			 * Parse MADT IO-APIC entries
 			 */
@@ -1197,8 +1194,6 @@
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
-				if (apic->setup_apic_routing)
-					apic->setup_apic_routing();
 			}
 		}
 		if (error == -EINVAL) {
@@ -1349,14 +1344,6 @@
 	 },
 	{
 	 .callback = force_acpi_ht,
-	 .ident = "ASUS P2B-DS",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
-		     },
-	 },
-	{
-	 .callback = force_acpi_ht,
 	 .ident = "ASUS CUR-DLS",
 	 .matches = {
 		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
@@ -1529,16 +1516,10 @@
  *	if acpi_blacklisted() acpi_disabled = 1;
  *	acpi_irq_model=...
  *	...
- *
- * return value: (currently ignored)
- *	0: success
- *	!0: failure
  */
 
-int __init acpi_boot_table_init(void)
+void __init acpi_boot_table_init(void)
 {
-	int error;
-
 	dmi_check_system(acpi_dmi_table);
 
 	/*
@@ -1546,15 +1527,14 @@
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs
 	 */
 	if (acpi_disabled && !acpi_ht)
-		return 1;
+		return; 
 
 	/*
 	 * Initialize the ACPI boot-time table parser.
 	 */
-	error = acpi_table_init();
-	if (error) {
+	if (acpi_table_init()) {
 		disable_acpi();
-		return error;
+		return;
 	}
 
 	acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
@@ -1562,18 +1542,15 @@
 	/*
 	 * blacklist may disable ACPI entirely
 	 */
-	error = acpi_blacklisted();
-	if (error) {
+	if (acpi_blacklisted()) {
 		if (acpi_force) {
 			printk(KERN_WARNING PREFIX "acpi=force override\n");
 		} else {
 			printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
 			disable_acpi();
-			return error;
+			return;
 		}
 	}
-
-	return 0;
 }
 
 int __init early_acpi_boot_init(void)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 23824fe..adb0ba0 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -980,7 +980,7 @@
 {
 	int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT;
 	struct amd_iommu *iommu;
-	int i;
+	unsigned long i;
 
 #ifdef CONFIG_IOMMU_STRESS
 	populate = false;
@@ -1489,11 +1489,14 @@
 {
 	struct iommu_dev_data *dev_data = get_dev_data(dev);
 	struct iommu_dev_data *alias_data;
+	struct protection_domain *domain;
 	unsigned long flags;
 
 	BUG_ON(!dev_data->domain);
 
-	spin_lock_irqsave(&dev_data->domain->lock, flags);
+	domain = dev_data->domain;
+
+	spin_lock_irqsave(&domain->lock, flags);
 
 	if (dev_data->alias != dev) {
 		alias_data = get_dev_data(dev_data->alias);
@@ -1504,13 +1507,15 @@
 	if (atomic_dec_and_test(&dev_data->bind))
 		do_detach(dev);
 
-	spin_unlock_irqrestore(&dev_data->domain->lock, flags);
+	spin_unlock_irqrestore(&domain->lock, flags);
 
 	/*
 	 * If we run in passthrough mode the device must be assigned to the
-	 * passthrough domain if it is detached from any other domain
+	 * passthrough domain if it is detached from any other domain.
+	 * Make sure we can deassign from the pt_domain itself.
 	 */
-	if (iommu_pass_through && dev_data->domain == NULL)
+	if (iommu_pass_through &&
+	    (dev_data->domain == NULL && domain != pt_domain))
 		__attach_device(dev, pt_domain);
 }
 
@@ -2218,6 +2223,12 @@
 /*
  * The function which clues the AMD IOMMU driver into dma_ops.
  */
+
+void __init amd_iommu_init_api(void)
+{
+	register_iommu(&amd_iommu_ops);
+}
+
 int __init amd_iommu_init_dma_ops(void)
 {
 	struct amd_iommu *iommu;
@@ -2253,8 +2264,6 @@
 	/* Make the driver finally visible to the drivers */
 	dma_ops = &amd_iommu_dma_ops;
 
-	register_iommu(&amd_iommu_ops);
-
 	amd_iommu_stats_init();
 
 	return 0;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index fb490ce..9dc91b4 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -1292,9 +1292,12 @@
 		ret = amd_iommu_init_passthrough();
 	else
 		ret = amd_iommu_init_dma_ops();
+
 	if (ret)
 		goto free;
 
+	amd_iommu_init_api();
+
 	amd_iommu_init_notifier();
 
 	enable_iommus();
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 3704997..f147a95 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -31,6 +31,7 @@
 #include <asm/x86_init.h>
 
 int gart_iommu_aperture;
+EXPORT_SYMBOL_GPL(gart_iommu_aperture);
 int gart_iommu_aperture_disabled __initdata;
 int gart_iommu_aperture_allowed __initdata;
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index e80f291..dfca210 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -61,12 +61,6 @@
 
 /*
  * The highest APIC ID seen during enumeration.
- *
- * This determines the messaging protocol we can use: if all APIC IDs
- * are in the 0 ... 7 range, then we can use logical addressing which
- * has some performance advantages (better broadcasting).
- *
- * If there's an APIC ID above 8, we use physical addressing.
  */
 unsigned int max_physical_apicid;
 
@@ -1647,9 +1641,7 @@
 #endif
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	verify_local_APIC();
 	connect_bsp_APIC();
@@ -1897,28 +1889,6 @@
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
-#ifdef CONFIG_X86_32
-	/*
-	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-	 * but we need to work other dependencies like SMP_SUSPEND etc
-	 * before this can be done without some confusion.
-	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-	 *       - Ashok Raj <ashok.raj@intel.com>
-	 */
-	if (max_physical_apicid >= 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-#endif
-
 #if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
 	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index eacbd2b..e3c3d82 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -240,6 +240,11 @@
 		printk(KERN_DEBUG "system APIC only can use physical flat");
 		return 1;
 	}
+
+	if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
+		printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
+		return 1;
+	}
 #endif
 
 	return 0;
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 1a6559f..99d2fe0 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -52,7 +52,32 @@
 }
 late_initcall(print_ipi_mode);
 
-void default_setup_apic_routing(void)
+void __init default_setup_apic_routing(void)
+{
+	int version = apic_version[boot_cpu_physical_apicid];
+
+	if (num_possible_cpus() > 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+
+#ifdef CONFIG_X86_BIGSMP
+	generic_bigsmp_probe();
+#endif
+
+	if (apic->setup_apic_routing)
+		apic->setup_apic_routing();
+}
+
+static void setup_apic_flat_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
 	printk(KERN_INFO
@@ -103,7 +128,7 @@
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
+	.setup_apic_routing		= setup_apic_flat_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 65edc18..83e9be4 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -64,15 +64,13 @@
 			apic = &apic_x2apic_phys;
 		else
 			apic = &apic_x2apic_cluster;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 #endif
 
-	if (apic == &apic_flat) {
-		if (max_physical_apicid >= 8)
+	if (apic == &apic_flat && num_possible_cpus() > 8)
 			apic = &apic_physflat;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
-	}
+
+	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 
 	if (is_vsmp_box()) {
 		/* need to update phys_pkg_id */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 5f92494..21db3cb 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -36,6 +36,8 @@
 
 static enum uv_system_type uv_system_type;
 static u64 gru_start_paddr, gru_end_paddr;
+int uv_min_hub_revision_id;
+EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
 
 static inline bool is_GRU_range(u64 start, u64 end)
 {
@@ -55,12 +57,19 @@
 	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
 	node_id.v = *mmr;
 	early_iounmap(mmr, sizeof(*mmr));
+
+	/* Currently, all blades have same revision number */
+	uv_min_hub_revision_id = node_id.s.revision;
+
 	return node_id.s.node_id;
 }
 
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
+	int nodeid;
+
 	if (!strcmp(oem_id, "SGI")) {
+		nodeid = early_get_nodeid();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
 		if (!strcmp(oem_table_id, "UVL"))
 			uv_system_type = UV_LEGACY_APIC;
@@ -68,7 +77,7 @@
 			uv_system_type = UV_X2APIC;
 		else if (!strcmp(oem_table_id, "UVH")) {
 			__get_cpu_var(x2apic_extra_bits) =
-				early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
+				nodeid << (UV_APIC_PNODE_SHIFT - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
 			return 1;
 		}
@@ -374,13 +383,13 @@
 
 enum map_type {map_wb, map_uc};
 
-static __init void map_high(char *id, unsigned long base, int shift,
-			    int max_pnode, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int pshift,
+			int bshift, int max_pnode, enum map_type map_type)
 {
 	unsigned long bytes, paddr;
 
-	paddr = base << shift;
-	bytes = (1UL << shift) * (max_pnode + 1);
+	paddr = base << pshift;
+	bytes = (1UL << bshift) * (max_pnode + 1);
 	printk(KERN_INFO "UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr,
 						paddr + bytes);
 	if (map_type == map_uc)
@@ -396,7 +405,7 @@
 
 	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
 	if (gru.s.enable) {
-		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+		map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
 		gru_start_paddr = ((u64)gru.s.base << shift);
 		gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
 
@@ -410,7 +419,7 @@
 
 	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
 	if (mmr.s.enable)
-		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+		map_high("MMR", mmr.s.base, shift, shift, max_pnode, map_uc);
 }
 
 static __init void map_mmioh_high(int max_pnode)
@@ -420,7 +429,8 @@
 
 	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
 	if (mmioh.s.enable)
-		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
+		map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io,
+			max_pnode, map_uc);
 }
 
 static __init void map_low_mmrs(void)
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 1d2cb38..c202b62 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -19,8 +19,6 @@
 obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
 
-obj-$(CONFIG_X86_CPU_DEBUG)		+= cpu_debug.o
-
 obj-$(CONFIG_CPU_SUP_INTEL)		+= intel.o
 obj-$(CONFIG_CPU_SUP_AMD)		+= amd.o
 obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
deleted file mode 100644
index b368cd8..0000000
--- a/arch/x86/kernel/cpu/cpu_debug.c
+++ /dev/null
@@ -1,688 +0,0 @@
-/*
- * CPU x86 architecture debug code
- *
- * Copyright(C) 2009 Jaswinder Singh Rajput
- *
- * For licencing details see kernel-base/COPYING
- */
-
-#include <linux/interrupt.h>
-#include <linux/compiler.h>
-#include <linux/seq_file.h>
-#include <linux/debugfs.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/percpu.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-
-#include <asm/cpu_debug.h>
-#include <asm/paravirt.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/apic.h>
-#include <asm/desc.h>
-
-static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpud_arr);
-static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], cpud_priv_arr);
-static DEFINE_PER_CPU(int, cpud_priv_count);
-
-static DEFINE_MUTEX(cpu_debug_lock);
-
-static struct dentry *cpu_debugfs_dir;
-
-static struct cpu_debug_base cpu_base[] = {
-	{ "mc",		CPU_MC,		0	},
-	{ "monitor",	CPU_MONITOR,	0	},
-	{ "time",	CPU_TIME,	0	},
-	{ "pmc",	CPU_PMC,	1	},
-	{ "platform",	CPU_PLATFORM,	0	},
-	{ "apic",	CPU_APIC,	0	},
-	{ "poweron",	CPU_POWERON,	0	},
-	{ "control",	CPU_CONTROL,	0	},
-	{ "features",	CPU_FEATURES,	0	},
-	{ "lastbranch",	CPU_LBRANCH,	0	},
-	{ "bios",	CPU_BIOS,	0	},
-	{ "freq",	CPU_FREQ,	0	},
-	{ "mtrr",	CPU_MTRR,	0	},
-	{ "perf",	CPU_PERF,	0	},
-	{ "cache",	CPU_CACHE,	0	},
-	{ "sysenter",	CPU_SYSENTER,	0	},
-	{ "therm",	CPU_THERM,	0	},
-	{ "misc",	CPU_MISC,	0	},
-	{ "debug",	CPU_DEBUG,	0	},
-	{ "pat",	CPU_PAT,	0	},
-	{ "vmx",	CPU_VMX,	0	},
-	{ "call",	CPU_CALL,	0	},
-	{ "base",	CPU_BASE,	0	},
-	{ "ver",	CPU_VER,	0	},
-	{ "conf",	CPU_CONF,	0	},
-	{ "smm",	CPU_SMM,	0	},
-	{ "svm",	CPU_SVM,	0	},
-	{ "osvm",	CPU_OSVM,	0	},
-	{ "tss",	CPU_TSS,	0	},
-	{ "cr",		CPU_CR,		0	},
-	{ "dt",		CPU_DT,		0	},
-	{ "registers",	CPU_REG_ALL,	0	},
-};
-
-static struct cpu_file_base cpu_file[] = {
-	{ "index",	CPU_REG_ALL,	0	},
-	{ "value",	CPU_REG_ALL,	1	},
-};
-
-/* CPU Registers Range */
-static struct cpu_debug_range cpu_reg_range[] = {
-	{ 0x00000000, 0x00000001, CPU_MC,	},
-	{ 0x00000006, 0x00000007, CPU_MONITOR,	},
-	{ 0x00000010, 0x00000010, CPU_TIME,	},
-	{ 0x00000011, 0x00000013, CPU_PMC,	},
-	{ 0x00000017, 0x00000017, CPU_PLATFORM,	},
-	{ 0x0000001B, 0x0000001B, CPU_APIC,	},
-	{ 0x0000002A, 0x0000002B, CPU_POWERON,	},
-	{ 0x0000002C, 0x0000002C, CPU_FREQ,	},
-	{ 0x0000003A, 0x0000003A, CPU_CONTROL,	},
-	{ 0x00000040, 0x00000047, CPU_LBRANCH,	},
-	{ 0x00000060, 0x00000067, CPU_LBRANCH,	},
-	{ 0x00000079, 0x00000079, CPU_BIOS,	},
-	{ 0x00000088, 0x0000008A, CPU_CACHE,	},
-	{ 0x0000008B, 0x0000008B, CPU_BIOS,	},
-	{ 0x0000009B, 0x0000009B, CPU_MONITOR,	},
-	{ 0x000000C1, 0x000000C4, CPU_PMC,	},
-	{ 0x000000CD, 0x000000CD, CPU_FREQ,	},
-	{ 0x000000E7, 0x000000E8, CPU_PERF,	},
-	{ 0x000000FE, 0x000000FE, CPU_MTRR,	},
-
-	{ 0x00000116, 0x0000011E, CPU_CACHE,	},
-	{ 0x00000174, 0x00000176, CPU_SYSENTER,	},
-	{ 0x00000179, 0x0000017B, CPU_MC,	},
-	{ 0x00000186, 0x00000189, CPU_PMC,	},
-	{ 0x00000198, 0x00000199, CPU_PERF,	},
-	{ 0x0000019A, 0x0000019A, CPU_TIME,	},
-	{ 0x0000019B, 0x0000019D, CPU_THERM,	},
-	{ 0x000001A0, 0x000001A0, CPU_MISC,	},
-	{ 0x000001C9, 0x000001C9, CPU_LBRANCH,	},
-	{ 0x000001D7, 0x000001D8, CPU_LBRANCH,	},
-	{ 0x000001D9, 0x000001D9, CPU_DEBUG,	},
-	{ 0x000001DA, 0x000001E0, CPU_LBRANCH,	},
-
-	{ 0x00000200, 0x0000020F, CPU_MTRR,	},
-	{ 0x00000250, 0x00000250, CPU_MTRR,	},
-	{ 0x00000258, 0x00000259, CPU_MTRR,	},
-	{ 0x00000268, 0x0000026F, CPU_MTRR,	},
-	{ 0x00000277, 0x00000277, CPU_PAT,	},
-	{ 0x000002FF, 0x000002FF, CPU_MTRR,	},
-
-	{ 0x00000300, 0x00000311, CPU_PMC,	},
-	{ 0x00000345, 0x00000345, CPU_PMC,	},
-	{ 0x00000360, 0x00000371, CPU_PMC,	},
-	{ 0x0000038D, 0x00000390, CPU_PMC,	},
-	{ 0x000003A0, 0x000003BE, CPU_PMC,	},
-	{ 0x000003C0, 0x000003CD, CPU_PMC,	},
-	{ 0x000003E0, 0x000003E1, CPU_PMC,	},
-	{ 0x000003F0, 0x000003F2, CPU_PMC,	},
-
-	{ 0x00000400, 0x00000417, CPU_MC,	},
-	{ 0x00000480, 0x0000048B, CPU_VMX,	},
-
-	{ 0x00000600, 0x00000600, CPU_DEBUG,	},
-	{ 0x00000680, 0x0000068F, CPU_LBRANCH,	},
-	{ 0x000006C0, 0x000006CF, CPU_LBRANCH,	},
-
-	{ 0x000107CC, 0x000107D3, CPU_PMC,	},
-
-	{ 0xC0000080, 0xC0000080, CPU_FEATURES,	},
-	{ 0xC0000081, 0xC0000084, CPU_CALL,	},
-	{ 0xC0000100, 0xC0000102, CPU_BASE,	},
-	{ 0xC0000103, 0xC0000103, CPU_TIME,	},
-
-	{ 0xC0010000, 0xC0010007, CPU_PMC,	},
-	{ 0xC0010010, 0xC0010010, CPU_CONF,	},
-	{ 0xC0010015, 0xC0010015, CPU_CONF,	},
-	{ 0xC0010016, 0xC001001A, CPU_MTRR,	},
-	{ 0xC001001D, 0xC001001D, CPU_MTRR,	},
-	{ 0xC001001F, 0xC001001F, CPU_CONF,	},
-	{ 0xC0010030, 0xC0010035, CPU_BIOS,	},
-	{ 0xC0010044, 0xC0010048, CPU_MC,	},
-	{ 0xC0010050, 0xC0010056, CPU_SMM,	},
-	{ 0xC0010058, 0xC0010058, CPU_CONF,	},
-	{ 0xC0010060, 0xC0010060, CPU_CACHE,	},
-	{ 0xC0010061, 0xC0010068, CPU_SMM,	},
-	{ 0xC0010069, 0xC001006B, CPU_SMM,	},
-	{ 0xC0010070, 0xC0010071, CPU_SMM,	},
-	{ 0xC0010111, 0xC0010113, CPU_SMM,	},
-	{ 0xC0010114, 0xC0010118, CPU_SVM,	},
-	{ 0xC0010140, 0xC0010141, CPU_OSVM,	},
-	{ 0xC0011022, 0xC0011023, CPU_CONF,	},
-};
-
-static int is_typeflag_valid(unsigned cpu, unsigned flag)
-{
-	int i;
-
-	/* Standard Registers should be always valid */
-	if (flag >= CPU_TSS)
-		return 1;
-
-	for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
-		if (cpu_reg_range[i].flag == flag)
-			return 1;
-	}
-
-	/* Invalid */
-	return 0;
-}
-
-static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max,
-			      int index, unsigned flag)
-{
-	if (cpu_reg_range[index].flag == flag) {
-		*min = cpu_reg_range[index].min;
-		*max = cpu_reg_range[index].max;
-	} else
-		*max = 0;
-
-	return *max;
-}
-
-/* This function can also be called with seq = NULL for printk */
-static void print_cpu_data(struct seq_file *seq, unsigned type,
-			   u32 low, u32 high)
-{
-	struct cpu_private *priv;
-	u64 val = high;
-
-	if (seq) {
-		priv = seq->private;
-		if (priv->file) {
-			val = (val << 32) | low;
-			seq_printf(seq, "0x%llx\n", val);
-		} else
-			seq_printf(seq, " %08x: %08x_%08x\n",
-				   type, high, low);
-	} else
-		printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low);
-}
-
-/* This function can also be called with seq = NULL for printk */
-static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag)
-{
-	unsigned msr, msr_min, msr_max;
-	struct cpu_private *priv;
-	u32 low, high;
-	int i;
-
-	if (seq) {
-		priv = seq->private;
-		if (priv->file) {
-			if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg,
-					       &low, &high))
-				print_cpu_data(seq, priv->reg, low, high);
-			return;
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
-		if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag))
-			continue;
-
-		for (msr = msr_min; msr <= msr_max; msr++) {
-			if (rdmsr_safe_on_cpu(cpu, msr, &low, &high))
-				continue;
-			print_cpu_data(seq, msr, low, high);
-		}
-	}
-}
-
-static void print_tss(void *arg)
-{
-	struct pt_regs *regs = task_pt_regs(current);
-	struct seq_file *seq = arg;
-	unsigned int seg;
-
-	seq_printf(seq, " RAX\t: %016lx\n", regs->ax);
-	seq_printf(seq, " RBX\t: %016lx\n", regs->bx);
-	seq_printf(seq, " RCX\t: %016lx\n", regs->cx);
-	seq_printf(seq, " RDX\t: %016lx\n", regs->dx);
-
-	seq_printf(seq, " RSI\t: %016lx\n", regs->si);
-	seq_printf(seq, " RDI\t: %016lx\n", regs->di);
-	seq_printf(seq, " RBP\t: %016lx\n", regs->bp);
-	seq_printf(seq, " ESP\t: %016lx\n", regs->sp);
-
-#ifdef CONFIG_X86_64
-	seq_printf(seq, " R08\t: %016lx\n", regs->r8);
-	seq_printf(seq, " R09\t: %016lx\n", regs->r9);
-	seq_printf(seq, " R10\t: %016lx\n", regs->r10);
-	seq_printf(seq, " R11\t: %016lx\n", regs->r11);
-	seq_printf(seq, " R12\t: %016lx\n", regs->r12);
-	seq_printf(seq, " R13\t: %016lx\n", regs->r13);
-	seq_printf(seq, " R14\t: %016lx\n", regs->r14);
-	seq_printf(seq, " R15\t: %016lx\n", regs->r15);
-#endif
-
-	asm("movl %%cs,%0" : "=r" (seg));
-	seq_printf(seq, " CS\t:             %04x\n", seg);
-	asm("movl %%ds,%0" : "=r" (seg));
-	seq_printf(seq, " DS\t:             %04x\n", seg);
-	seq_printf(seq, " SS\t:             %04lx\n", regs->ss & 0xffff);
-	asm("movl %%es,%0" : "=r" (seg));
-	seq_printf(seq, " ES\t:             %04x\n", seg);
-	asm("movl %%fs,%0" : "=r" (seg));
-	seq_printf(seq, " FS\t:             %04x\n", seg);
-	asm("movl %%gs,%0" : "=r" (seg));
-	seq_printf(seq, " GS\t:             %04x\n", seg);
-
-	seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags);
-
-	seq_printf(seq, " EIP\t: %016lx\n", regs->ip);
-}
-
-static void print_cr(void *arg)
-{
-	struct seq_file *seq = arg;
-
-	seq_printf(seq, " cr0\t: %016lx\n", read_cr0());
-	seq_printf(seq, " cr2\t: %016lx\n", read_cr2());
-	seq_printf(seq, " cr3\t: %016lx\n", read_cr3());
-	seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe());
-#ifdef CONFIG_X86_64
-	seq_printf(seq, " cr8\t: %016lx\n", read_cr8());
-#endif
-}
-
-static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt)
-{
-	seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size));
-}
-
-static void print_dt(void *seq)
-{
-	struct desc_ptr dt;
-	unsigned long ldt;
-
-	/* IDT */
-	store_idt((struct desc_ptr *)&dt);
-	print_desc_ptr("IDT", seq, dt);
-
-	/* GDT */
-	store_gdt((struct desc_ptr *)&dt);
-	print_desc_ptr("GDT", seq, dt);
-
-	/* LDT */
-	store_ldt(ldt);
-	seq_printf(seq, " LDT\t: %016lx\n", ldt);
-
-	/* TR */
-	store_tr(ldt);
-	seq_printf(seq, " TR\t: %016lx\n", ldt);
-}
-
-static void print_dr(void *arg)
-{
-	struct seq_file *seq = arg;
-	unsigned long dr;
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		/* Ignore db4, db5 */
-		if ((i == 4) || (i == 5))
-			continue;
-		get_debugreg(dr, i);
-		seq_printf(seq, " dr%d\t: %016lx\n", i, dr);
-	}
-
-	seq_printf(seq, "\n MSR\t:\n");
-}
-
-static void print_apic(void *arg)
-{
-	struct seq_file *seq = arg;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	seq_printf(seq, " LAPIC\t:\n");
-	seq_printf(seq, " ID\t\t: %08x\n",  apic_read(APIC_ID) >> 24);
-	seq_printf(seq, " LVR\t\t: %08x\n",  apic_read(APIC_LVR));
-	seq_printf(seq, " TASKPRI\t: %08x\n",  apic_read(APIC_TASKPRI));
-	seq_printf(seq, " ARBPRI\t\t: %08x\n",  apic_read(APIC_ARBPRI));
-	seq_printf(seq, " PROCPRI\t: %08x\n",  apic_read(APIC_PROCPRI));
-	seq_printf(seq, " LDR\t\t: %08x\n",  apic_read(APIC_LDR));
-	seq_printf(seq, " DFR\t\t: %08x\n",  apic_read(APIC_DFR));
-	seq_printf(seq, " SPIV\t\t: %08x\n",  apic_read(APIC_SPIV));
-	seq_printf(seq, " ISR\t\t: %08x\n",  apic_read(APIC_ISR));
-	seq_printf(seq, " ESR\t\t: %08x\n",  apic_read(APIC_ESR));
-	seq_printf(seq, " ICR\t\t: %08x\n",  apic_read(APIC_ICR));
-	seq_printf(seq, " ICR2\t\t: %08x\n",  apic_read(APIC_ICR2));
-	seq_printf(seq, " LVTT\t\t: %08x\n",  apic_read(APIC_LVTT));
-	seq_printf(seq, " LVTTHMR\t: %08x\n",  apic_read(APIC_LVTTHMR));
-	seq_printf(seq, " LVTPC\t\t: %08x\n",  apic_read(APIC_LVTPC));
-	seq_printf(seq, " LVT0\t\t: %08x\n",  apic_read(APIC_LVT0));
-	seq_printf(seq, " LVT1\t\t: %08x\n",  apic_read(APIC_LVT1));
-	seq_printf(seq, " LVTERR\t\t: %08x\n",  apic_read(APIC_LVTERR));
-	seq_printf(seq, " TMICT\t\t: %08x\n",  apic_read(APIC_TMICT));
-	seq_printf(seq, " TMCCT\t\t: %08x\n",  apic_read(APIC_TMCCT));
-	seq_printf(seq, " TDCR\t\t: %08x\n",  apic_read(APIC_TDCR));
-	if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
-		unsigned int i, v, maxeilvt;
-
-		v = apic_read(APIC_EFEAT);
-		maxeilvt = (v >> 16) & 0xff;
-		seq_printf(seq, " EFEAT\t\t: %08x\n", v);
-		seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL));
-
-		for (i = 0; i < maxeilvt; i++) {
-			v = apic_read(APIC_EILVTn(i));
-			seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v);
-		}
-	}
-#endif /* CONFIG_X86_LOCAL_APIC */
-	seq_printf(seq, "\n MSR\t:\n");
-}
-
-static int cpu_seq_show(struct seq_file *seq, void *v)
-{
-	struct cpu_private *priv = seq->private;
-
-	if (priv == NULL)
-		return -EINVAL;
-
-	switch (cpu_base[priv->type].flag) {
-	case CPU_TSS:
-		smp_call_function_single(priv->cpu, print_tss, seq, 1);
-		break;
-	case CPU_CR:
-		smp_call_function_single(priv->cpu, print_cr, seq, 1);
-		break;
-	case CPU_DT:
-		smp_call_function_single(priv->cpu, print_dt, seq, 1);
-		break;
-	case CPU_DEBUG:
-		if (priv->file == CPU_INDEX_BIT)
-			smp_call_function_single(priv->cpu, print_dr, seq, 1);
-		print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
-		break;
-	case CPU_APIC:
-		if (priv->file == CPU_INDEX_BIT)
-			smp_call_function_single(priv->cpu, print_apic, seq, 1);
-		print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
-		break;
-
-	default:
-		print_msr(seq, priv->cpu, cpu_base[priv->type].flag);
-		break;
-	}
-	seq_printf(seq, "\n");
-
-	return 0;
-}
-
-static void *cpu_seq_start(struct seq_file *seq, loff_t *pos)
-{
-	if (*pos == 0) /* One time is enough ;-) */
-		return seq;
-
-	return NULL;
-}
-
-static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	(*pos)++;
-
-	return cpu_seq_start(seq, pos);
-}
-
-static void cpu_seq_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations cpu_seq_ops = {
-	.start		= cpu_seq_start,
-	.next		= cpu_seq_next,
-	.stop		= cpu_seq_stop,
-	.show		= cpu_seq_show,
-};
-
-static int cpu_seq_open(struct inode *inode, struct file *file)
-{
-	struct cpu_private *priv = inode->i_private;
-	struct seq_file *seq;
-	int err;
-
-	err = seq_open(file, &cpu_seq_ops);
-	if (!err) {
-		seq = file->private_data;
-		seq->private = priv;
-	}
-
-	return err;
-}
-
-static int write_msr(struct cpu_private *priv, u64 val)
-{
-	u32 low, high;
-
-	high = (val >> 32) & 0xffffffff;
-	low = val & 0xffffffff;
-
-	if (!wrmsr_safe_on_cpu(priv->cpu, priv->reg, low, high))
-		return 0;
-
-	return -EPERM;
-}
-
-static int write_cpu_register(struct cpu_private *priv, const char *buf)
-{
-	int ret = -EPERM;
-	u64 val;
-
-	ret = strict_strtoull(buf, 0, &val);
-	if (ret < 0)
-		return ret;
-
-	/* Supporting only MSRs */
-	if (priv->type < CPU_TSS_BIT)
-		return write_msr(priv, val);
-
-	return ret;
-}
-
-static ssize_t cpu_write(struct file *file, const char __user *ubuf,
-			     size_t count, loff_t *off)
-{
-	struct seq_file *seq = file->private_data;
-	struct cpu_private *priv = seq->private;
-	char buf[19];
-
-	if ((priv == NULL) || (count >= sizeof(buf)))
-		return -EINVAL;
-
-	if (copy_from_user(&buf, ubuf, count))
-		return -EFAULT;
-
-	buf[count] = 0;
-
-	if ((cpu_base[priv->type].write) && (cpu_file[priv->file].write))
-		if (!write_cpu_register(priv, buf))
-			return count;
-
-	return -EACCES;
-}
-
-static const struct file_operations cpu_fops = {
-	.owner		= THIS_MODULE,
-	.open		= cpu_seq_open,
-	.read		= seq_read,
-	.write		= cpu_write,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg,
-			   unsigned file, struct dentry *dentry)
-{
-	struct cpu_private *priv = NULL;
-
-	/* Already intialized */
-	if (file == CPU_INDEX_BIT)
-		if (per_cpu(cpud_arr[type].init, cpu))
-			return 0;
-
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (priv == NULL)
-		return -ENOMEM;
-
-	priv->cpu = cpu;
-	priv->type = type;
-	priv->reg = reg;
-	priv->file = file;
-	mutex_lock(&cpu_debug_lock);
-	per_cpu(cpud_priv_arr[type], cpu) = priv;
-	per_cpu(cpud_priv_count, cpu)++;
-	mutex_unlock(&cpu_debug_lock);
-
-	if (file)
-		debugfs_create_file(cpu_file[file].name, S_IRUGO,
-				    dentry, (void *)priv, &cpu_fops);
-	else {
-		debugfs_create_file(cpu_base[type].name, S_IRUGO,
-				    per_cpu(cpud_arr[type].dentry, cpu),
-				    (void *)priv, &cpu_fops);
-		mutex_lock(&cpu_debug_lock);
-		per_cpu(cpud_arr[type].init, cpu) = 1;
-		mutex_unlock(&cpu_debug_lock);
-	}
-
-	return 0;
-}
-
-static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg,
-			     struct dentry *dentry)
-{
-	unsigned file;
-	int err = 0;
-
-	for (file = 0; file <  ARRAY_SIZE(cpu_file); file++) {
-		err = cpu_create_file(cpu, type, reg, file, dentry);
-		if (err)
-			return err;
-	}
-
-	return err;
-}
-
-static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry)
-{
-	struct dentry *cpu_dentry = NULL;
-	unsigned reg, reg_min, reg_max;
-	int i, err = 0;
-	char reg_dir[12];
-	u32 low, high;
-
-	for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
-		if (!get_cpu_range(cpu, &reg_min, &reg_max, i,
-				   cpu_base[type].flag))
-			continue;
-
-		for (reg = reg_min; reg <= reg_max; reg++) {
-			if (rdmsr_safe_on_cpu(cpu, reg, &low, &high))
-				continue;
-
-			sprintf(reg_dir, "0x%x", reg);
-			cpu_dentry = debugfs_create_dir(reg_dir, dentry);
-			err = cpu_init_regfiles(cpu, type, reg, cpu_dentry);
-			if (err)
-				return err;
-		}
-	}
-
-	return err;
-}
-
-static int cpu_init_allreg(unsigned cpu, struct dentry *dentry)
-{
-	struct dentry *cpu_dentry = NULL;
-	unsigned type;
-	int err = 0;
-
-	for (type = 0; type <  ARRAY_SIZE(cpu_base) - 1; type++) {
-		if (!is_typeflag_valid(cpu, cpu_base[type].flag))
-			continue;
-		cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry);
-		per_cpu(cpud_arr[type].dentry, cpu) = cpu_dentry;
-
-		if (type < CPU_TSS_BIT)
-			err = cpu_init_msr(cpu, type, cpu_dentry);
-		else
-			err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT,
-					      cpu_dentry);
-		if (err)
-			return err;
-	}
-
-	return err;
-}
-
-static int cpu_init_cpu(void)
-{
-	struct dentry *cpu_dentry = NULL;
-	struct cpuinfo_x86 *cpui;
-	char cpu_dir[12];
-	unsigned cpu;
-	int err = 0;
-
-	for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
-		cpui = &cpu_data(cpu);
-		if (!cpu_has(cpui, X86_FEATURE_MSR))
-			continue;
-
-		sprintf(cpu_dir, "cpu%d", cpu);
-		cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir);
-		err = cpu_init_allreg(cpu, cpu_dentry);
-
-		pr_info("cpu%d(%d) debug files %d\n",
-			cpu, nr_cpu_ids, per_cpu(cpud_priv_count, cpu));
-		if (per_cpu(cpud_priv_count, cpu) > MAX_CPU_FILES) {
-			pr_err("Register files count %d exceeds limit %d\n",
-				per_cpu(cpud_priv_count, cpu), MAX_CPU_FILES);
-			per_cpu(cpud_priv_count, cpu) = MAX_CPU_FILES;
-			err = -ENFILE;
-		}
-		if (err)
-			return err;
-	}
-
-	return err;
-}
-
-static int __init cpu_debug_init(void)
-{
-	cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir);
-
-	return cpu_init_cpu();
-}
-
-static void __exit cpu_debug_exit(void)
-{
-	int i, cpu;
-
-	if (cpu_debugfs_dir)
-		debugfs_remove_recursive(cpu_debugfs_dir);
-
-	for (cpu = 0; cpu <  nr_cpu_ids; cpu++)
-		for (i = 0; i < per_cpu(cpud_priv_count, cpu); i++)
-			kfree(per_cpu(cpud_priv_arr[i], cpu));
-}
-
-module_init(cpu_debug_init);
-module_exit(cpu_debug_exit);
-
-MODULE_AUTHOR("Jaswinder Singh Rajput");
-MODULE_DESCRIPTION("CPU Debug module");
-MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index f125e5c..6e44519 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1356,6 +1356,7 @@
 
 	kfree(data->powernow_table);
 	kfree(data);
+	per_cpu(powernow_data, pol->cpu) = NULL;
 
 	return 0;
 }
@@ -1375,7 +1376,7 @@
 	int err;
 
 	if (!data)
-		return -EINVAL;
+		return 0;
 
 	smp_call_function_single(cpu, query_values_on_cpu, &err, true);
 	if (err)
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index d616c06..8c1c070 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1343,6 +1343,13 @@
 		bits |= 0x2;
 	if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
 		bits |= 0x1;
+
+	/*
+	 * ANY bit is supported in v3 and up
+	 */
+	if (x86_pmu.version > 2 && hwc->config & ARCH_PERFMON_EVENTSEL_ANY)
+		bits |= 0x4;
+
 	bits <<= (idx * 4);
 	mask = 0xfULL << (idx * 4);
 
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index cb27fd6..83e5e62 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -229,7 +229,7 @@
 	for_each_online_cpu(cpu)
 		cpuid_device_destroy(cpu);
 	class_destroy(cpuid_class);
-	unregister_chrdev(CPUID_MAJOR, "cpu/cpuid");
+	__unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid");
 	unregister_hotcpu_notifier(&cpuid_class_cpu_notifier);
 }
 
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c56bc28..6d81755 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -123,13 +123,15 @@
 	while (valid_stack_ptr(tinfo, ret_addr, sizeof(*ret_addr), end)) {
 		unsigned long addr = *ret_addr;
 
-		if (__kernel_text_address(addr)) {
-			ops->address(data, addr, 1);
-			frame = frame->next_frame;
-			ret_addr = &frame->return_address;
-			print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
-		}
+		if (!__kernel_text_address(addr))
+			break;
+
+		ops->address(data, addr, 1);
+		frame = frame->next_frame;
+		ret_addr = &frame->return_address;
+		print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
 	}
+
 	return (unsigned long)frame;
 }
 EXPORT_SYMBOL_GPL(print_context_stack_bp);
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ba6e658..ad80a1c 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -34,6 +34,8 @@
  */
 unsigned long				hpet_address;
 u8					hpet_blockid; /* OS timer block num */
+u8					hpet_msi_disable;
+
 #ifdef CONFIG_PCI_MSI
 static unsigned long			hpet_num_timers;
 #endif
@@ -596,6 +598,9 @@
 	unsigned int num_timers_used = 0;
 	int i;
 
+	if (hpet_msi_disable)
+		return;
+
 	if (boot_cpu_has(X86_FEATURE_ARAT))
 		return;
 	id = hpet_readl(HPET_ID);
@@ -928,6 +933,9 @@
 	hpet_reserve_platform_timers(hpet_readl(HPET_ID));
 	hpet_print_config();
 
+	if (hpet_msi_disable)
+		return 0;
+
 	if (boot_cpu_has(X86_FEATURE_ARAT))
 		return 0;
 
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index 05d5fec..bb6006e 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -212,25 +212,6 @@
 	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
 }
 
-/*
- * Store a breakpoint's encoded address, length, and type.
- */
-static int arch_store_info(struct perf_event *bp)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-	/*
-	 * For kernel-addresses, either the address or symbol name can be
-	 * specified.
-	 */
-	if (info->name)
-		info->address = (unsigned long)
-				kallsyms_lookup_name(info->name);
-	if (info->address)
-		return 0;
-
-	return -EINVAL;
-}
-
 int arch_bp_generic_fields(int x86_len, int x86_type,
 			   int *gen_len, int *gen_type)
 {
@@ -362,10 +343,13 @@
 		return ret;
 	}
 
-	ret = arch_store_info(bp);
-
-	if (ret < 0)
-		return ret;
+	/*
+	 * For kernel-addresses, either the address or symbol name can be
+	 * specified.
+	 */
+	if (info->name)
+		info->address = (unsigned long)
+				kallsyms_lookup_name(info->name);
 	/*
 	 * Check that the low-order bits of the address are appropriate
 	 * for the alignment implied by len.
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index dd74fe72..bfba601 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -42,6 +42,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/nmi.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/debugreg.h>
 #include <asm/apicdef.h>
@@ -204,40 +205,81 @@
 
 static struct hw_breakpoint {
 	unsigned		enabled;
-	unsigned		type;
-	unsigned		len;
 	unsigned long		addr;
+	int			len;
+	int			type;
+	struct perf_event	**pev;
 } breakinfo[4];
 
 static void kgdb_correct_hw_break(void)
 {
-	unsigned long dr7;
-	int correctit = 0;
-	int breakbit;
 	int breakno;
 
-	get_debugreg(dr7, 7);
 	for (breakno = 0; breakno < 4; breakno++) {
-		breakbit = 2 << (breakno << 1);
-		if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
-			correctit = 1;
-			dr7 |= breakbit;
-			dr7 &= ~(0xf0000 << (breakno << 2));
-			dr7 |= ((breakinfo[breakno].len << 2) |
-				 breakinfo[breakno].type) <<
-			       ((breakno << 2) + 16);
-			set_debugreg(breakinfo[breakno].addr, breakno);
-
-		} else {
-			if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
-				correctit = 1;
-				dr7 &= ~breakbit;
-				dr7 &= ~(0xf0000 << (breakno << 2));
-			}
-		}
+		struct perf_event *bp;
+		struct arch_hw_breakpoint *info;
+		int val;
+		int cpu = raw_smp_processor_id();
+		if (!breakinfo[breakno].enabled)
+			continue;
+		bp = *per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		info = counter_arch_bp(bp);
+		if (bp->attr.disabled != 1)
+			continue;
+		bp->attr.bp_addr = breakinfo[breakno].addr;
+		bp->attr.bp_len = breakinfo[breakno].len;
+		bp->attr.bp_type = breakinfo[breakno].type;
+		info->address = breakinfo[breakno].addr;
+		info->len = breakinfo[breakno].len;
+		info->type = breakinfo[breakno].type;
+		val = arch_install_hw_breakpoint(bp);
+		if (!val)
+			bp->attr.disabled = 0;
 	}
-	if (correctit)
-		set_debugreg(dr7, 7);
+	hw_breakpoint_restore();
+}
+
+static int hw_break_reserve_slot(int breakno)
+{
+	int cpu;
+	int cnt = 0;
+	struct perf_event **pevent;
+
+	for_each_online_cpu(cpu) {
+		cnt++;
+		pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		if (dbg_reserve_bp_slot(*pevent))
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	for_each_online_cpu(cpu) {
+		cnt--;
+		if (!cnt)
+			break;
+		pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		dbg_release_bp_slot(*pevent);
+	}
+	return -1;
+}
+
+static int hw_break_release_slot(int breakno)
+{
+	struct perf_event **pevent;
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		pevent = per_cpu_ptr(breakinfo[breakno].pev, cpu);
+		if (dbg_release_bp_slot(*pevent))
+			/*
+			 * The debugger is responisble for handing the retry on
+			 * remove failure.
+			 */
+			return -1;
+	}
+	return 0;
 }
 
 static int
@@ -251,6 +293,10 @@
 	if (i == 4)
 		return -1;
 
+	if (hw_break_release_slot(i)) {
+		printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr);
+		return -1;
+	}
 	breakinfo[i].enabled = 0;
 
 	return 0;
@@ -259,15 +305,23 @@
 static void kgdb_remove_all_hw_break(void)
 {
 	int i;
+	int cpu = raw_smp_processor_id();
+	struct perf_event *bp;
 
-	for (i = 0; i < 4; i++)
-		memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint));
+	for (i = 0; i < 4; i++) {
+		if (!breakinfo[i].enabled)
+			continue;
+		bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+		if (bp->attr.disabled == 1)
+			continue;
+		arch_uninstall_hw_breakpoint(bp);
+		bp->attr.disabled = 1;
+	}
 }
 
 static int
 kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
 {
-	unsigned type;
 	int i;
 
 	for (i = 0; i < 4; i++)
@@ -278,27 +332,42 @@
 
 	switch (bptype) {
 	case BP_HARDWARE_BREAKPOINT:
-		type = 0;
-		len  = 1;
+		len = 1;
+		breakinfo[i].type = X86_BREAKPOINT_EXECUTE;
 		break;
 	case BP_WRITE_WATCHPOINT:
-		type = 1;
+		breakinfo[i].type = X86_BREAKPOINT_WRITE;
 		break;
 	case BP_ACCESS_WATCHPOINT:
-		type = 3;
+		breakinfo[i].type = X86_BREAKPOINT_RW;
 		break;
 	default:
 		return -1;
 	}
-
-	if (len == 1 || len == 2 || len == 4)
-		breakinfo[i].len  = len - 1;
-	else
+	switch (len) {
+	case 1:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_1;
+		break;
+	case 2:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_2;
+		break;
+	case 4:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_4;
+		break;
+#ifdef CONFIG_X86_64
+	case 8:
+		breakinfo[i].len = X86_BREAKPOINT_LEN_8;
+		break;
+#endif
+	default:
 		return -1;
-
-	breakinfo[i].enabled = 1;
+	}
 	breakinfo[i].addr = addr;
-	breakinfo[i].type = type;
+	if (hw_break_reserve_slot(i)) {
+		breakinfo[i].addr = 0;
+		return -1;
+	}
+	breakinfo[i].enabled = 1;
 
 	return 0;
 }
@@ -313,8 +382,21 @@
  */
 void kgdb_disable_hw_debug(struct pt_regs *regs)
 {
+	int i;
+	int cpu = raw_smp_processor_id();
+	struct perf_event *bp;
+
 	/* Disable hardware debugging while we are in kgdb: */
 	set_debugreg(0UL, 7);
+	for (i = 0; i < 4; i++) {
+		if (!breakinfo[i].enabled)
+			continue;
+		bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
+		if (bp->attr.disabled == 1)
+			continue;
+		arch_uninstall_hw_breakpoint(bp);
+		bp->attr.disabled = 1;
+	}
 }
 
 /**
@@ -378,7 +460,6 @@
 			       struct pt_regs *linux_regs)
 {
 	unsigned long addr;
-	unsigned long dr6;
 	char *ptr;
 	int newPC;
 
@@ -404,20 +485,6 @@
 				   raw_smp_processor_id());
 		}
 
-		get_debugreg(dr6, 6);
-		if (!(dr6 & 0x4000)) {
-			int breakno;
-
-			for (breakno = 0; breakno < 4; breakno++) {
-				if (dr6 & (1 << breakno) &&
-				    breakinfo[breakno].type == 0) {
-					/* Set restore flag: */
-					linux_regs->flags |= X86_EFLAGS_RF;
-					break;
-				}
-			}
-		}
-		set_debugreg(0UL, 6);
 		kgdb_correct_hw_break();
 
 		return 0;
@@ -485,8 +552,7 @@
 		break;
 
 	case DIE_DEBUG:
-		if (atomic_read(&kgdb_cpu_doing_single_step) ==
-		    raw_smp_processor_id()) {
+		if (atomic_read(&kgdb_cpu_doing_single_step) != -1) {
 			if (user_mode(regs))
 				return single_step_cont(regs, args);
 			break;
@@ -539,7 +605,42 @@
  */
 int kgdb_arch_init(void)
 {
-	return register_die_notifier(&kgdb_notifier);
+	int i, cpu;
+	int ret;
+	struct perf_event_attr attr;
+	struct perf_event **pevent;
+
+	ret = register_die_notifier(&kgdb_notifier);
+	if (ret != 0)
+		return ret;
+	/*
+	 * Pre-allocate the hw breakpoint structions in the non-atomic
+	 * portion of kgdb because this operation requires mutexs to
+	 * complete.
+	 */
+	attr.bp_addr = (unsigned long)kgdb_arch_init;
+	attr.type = PERF_TYPE_BREAKPOINT;
+	attr.bp_len = HW_BREAKPOINT_LEN_1;
+	attr.bp_type = HW_BREAKPOINT_W;
+	attr.disabled = 1;
+	for (i = 0; i < 4; i++) {
+		breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL);
+		if (IS_ERR(breakinfo[i].pev)) {
+			printk(KERN_ERR "kgdb: Could not allocate hw breakpoints\n");
+			breakinfo[i].pev = NULL;
+			kgdb_arch_exit();
+			return -1;
+		}
+		for_each_online_cpu(cpu) {
+			pevent = per_cpu_ptr(breakinfo[i].pev, cpu);
+			pevent[0]->hw.sample_period = 1;
+			if (pevent[0]->destroy != NULL) {
+				pevent[0]->destroy = NULL;
+				release_bp_slot(*pevent);
+			}
+		}
+	}
+	return ret;
 }
 
 /**
@@ -550,6 +651,13 @@
  */
 void kgdb_arch_exit(void)
 {
+	int i;
+	for (i = 0; i < 4; i++) {
+		if (breakinfo[i].pev) {
+			unregister_wide_hw_breakpoint(breakinfo[i].pev);
+			breakinfo[i].pev = NULL;
+		}
+	}
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 37542b67..e1af7c0 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -36,9 +36,6 @@
 #define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
 #define UCODE_UCODE_TYPE           0x00000001
 
-const struct firmware *firmware;
-static int supported_cpu;
-
 struct equiv_cpu_entry {
 	u32	installed_cpu;
 	u32	fixed_errata_mask;
@@ -77,12 +74,15 @@
 
 static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	u32 dummy;
 
-	if (!supported_cpu)
-		return -1;
-
 	memset(csig, 0, sizeof(*csig));
+	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+		pr_warning("microcode: CPU%d: AMD CPU family 0x%x not "
+			   "supported\n", cpu, c->x86);
+		return -1;
+	}
 	rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
 	pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev);
 	return 0;
@@ -294,10 +294,14 @@
 
 static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 {
+	const char *fw_name = "amd-ucode/microcode_amd.bin";
+	const struct firmware *firmware;
 	enum ucode_state ret;
 
-	if (firmware == NULL)
+	if (request_firmware(&firmware, fw_name, device)) {
+		printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
 		return UCODE_NFOUND;
+	}
 
 	if (*(u32 *)firmware->data != UCODE_MAGIC) {
 		pr_err("invalid UCODE_MAGIC (0x%08x)\n",
@@ -307,6 +311,8 @@
 
 	ret = generic_load_microcode(cpu, firmware->data, firmware->size);
 
+	release_firmware(firmware);
+
 	return ret;
 }
 
@@ -325,31 +331,7 @@
 	uci->mc = NULL;
 }
 
-void init_microcode_amd(struct device *device)
-{
-	const char *fw_name = "amd-ucode/microcode_amd.bin";
-	struct cpuinfo_x86 *c = &boot_cpu_data;
-
-	WARN_ON(c->x86_vendor != X86_VENDOR_AMD);
-
-	if (c->x86 < 0x10) {
-		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
-		return;
-	}
-	supported_cpu = 1;
-
-	if (request_firmware(&firmware, fw_name, device))
-		pr_err("failed to load file %s\n", fw_name);
-}
-
-void fini_microcode_amd(void)
-{
-	release_firmware(firmware);
-}
-
 static struct microcode_ops microcode_amd_ops = {
-	.init				  = init_microcode_amd,
-	.fini				  = fini_microcode_amd,
 	.request_microcode_user           = request_microcode_user,
 	.request_microcode_fw             = request_microcode_fw,
 	.collect_cpu_info                 = collect_cpu_info_amd,
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 0c86324..cceb5bc 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -521,9 +521,6 @@
 		return PTR_ERR(microcode_pdev);
 	}
 
-	if (microcode_ops->init)
-		microcode_ops->init(&microcode_pdev->dev);
-
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
 
@@ -566,9 +563,6 @@
 
 	platform_device_unregister(microcode_pdev);
 
-	if (microcode_ops->fini)
-		microcode_ops->fini();
-
 	microcode_ops = NULL;
 
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 40b54ce..a2c1edd 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -359,13 +359,6 @@
 		x86_init.mpparse.mpc_record(1);
 	}
 
-#ifdef CONFIG_X86_BIGSMP
-	generic_bigsmp_probe();
-#endif
-
-	if (apic->setup_apic_routing)
-		apic->setup_apic_routing();
-
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 4bd93c9..206735a 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -285,7 +285,7 @@
 	for_each_online_cpu(cpu)
 		msr_device_destroy(cpu);
 	class_destroy(msr_class);
-	unregister_chrdev(MSR_MAJOR, "cpu/msr");
+	__unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr");
 	unregister_hotcpu_notifier(&msr_class_cpu_notifier);
 }
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index c6ee241..c9b3522 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -115,18 +115,6 @@
 {
 	struct task_struct *tsk = current;
 
-#ifdef CONFIG_X86_64
-	if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
-		clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
-		if (test_tsk_thread_flag(tsk, TIF_IA32)) {
-			clear_tsk_thread_flag(tsk, TIF_IA32);
-		} else {
-			set_tsk_thread_flag(tsk, TIF_IA32);
-			current_thread_info()->status |= TS_COMPAT;
-		}
-	}
-#endif
-
 	flush_ptrace_hw_breakpoint(tsk);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
 	/*
@@ -288,6 +276,8 @@
 	regs.es = __USER_DS;
 	regs.fs = __KERNEL_PERCPU;
 	regs.gs = __KERNEL_STACK_CANARY;
+#else
+	regs.ss = __KERNEL_DS;
 #endif
 
 	regs.orig_ax = -1;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index f9e0331..126f0b4 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -521,6 +521,18 @@
 	current->personality &= ~READ_IMPLIES_EXEC;
 }
 
+void set_personality_ia32(void)
+{
+	/* inherit personality from parent */
+
+	/* Make sure to be in 32bit mode */
+	set_thread_flag(TIF_IA32);
+	current->personality |= force_personality32;
+
+	/* Prepare the first "return" to user space */
+	current_thread_info()->status |= TS_COMPAT;
+}
+
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long stack;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 017d937..0c1033d 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -702,7 +702,7 @@
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
-		val = ptrace_get_dr7(thread->ptrace_bps);
+		val = thread->ptrace_dr7;
 	}
 	return val;
 }
@@ -778,8 +778,11 @@
 			return rc;
 	}
 	/* All that's left is DR7 */
-	if (n == 7)
+	if (n == 7) {
 		rc = ptrace_write_dr7(tsk, val);
+		if (!rc)
+			thread->ptrace_dr7 = val;
+	}
 
 ret_path:
 	return rc;
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 18093d7..12e9fea 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -491,6 +491,19 @@
 		break;
 	}
 }
+
+/*
+ * HPET MSI on some boards (ATI SB700/SB800) has side effect on
+ * floppy DMA. Disable HPET MSI on such platforms.
+ */
+static void force_disable_hpet_msi(struct pci_dev *unused)
+{
+	hpet_msi_disable = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+			 force_disable_hpet_msi);
+
 #endif
 
 #if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 1545bc0..704bddc 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -203,6 +203,15 @@
 			DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G*/
+		.callback = set_bios_reboot,
+		.ident = "Dell OptiPlex 760",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"),
+			DMI_MATCH(DMI_BOARD_NAME, "0G919G"),
+		},
+	},
 	{	/* Handle problems with rebooting on Dell 2400's */
 		.callback = set_bios_reboot,
 		.ident = "Dell PowerEdge 2400",
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f7b8b98..5d9e40c 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -642,19 +642,27 @@
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
 		},
 	},
-	{
 	/*
-	 * AMI BIOS with low memory corruption was found on Intel DG45ID board.
-	 * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+	 * AMI BIOS with low memory corruption was found on Intel DG45ID and
+	 * DG45FC boards.
+	 * It has a different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
 	 * match only DMI_BOARD_NAME and see if there is more bad products
 	 * with this vendor.
 	 */
+	{
 		.callback = dmi_low_memory_corruption,
 		.ident = "AMI BIOS",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
 		},
 	},
+	{
+		.callback = dmi_low_memory_corruption,
+		.ident = "AMI BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "DG45FC"),
+		},
+	},
 #endif
 	{}
 };
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 678d0b8..b4e870c 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1083,9 +1083,7 @@
 	set_cpu_sibling_map(0);
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c
index 3c84aa0..2b75ef63 100644
--- a/arch/x86/kernel/uv_time.c
+++ b/arch/x86/kernel/uv_time.c
@@ -282,10 +282,21 @@
 
 /*
  * Read the RTC.
+ *
+ * Starting with HUB rev 2.0, the UV RTC register is replicated across all
+ * cachelines of it's own page.  This allows faster simultaneous reads
+ * from a given socket.
  */
 static cycle_t uv_read_rtc(struct clocksource *cs)
 {
-	return (cycle_t)uv_read_local_mmr(UVH_RTC);
+	unsigned long offset;
+
+	if (uv_get_min_hub_revision_id() == 1)
+		offset = 0;
+	else
+		offset = (uv_blade_processor_id() * L1_CACHE_BYTES) % PAGE_SIZE;
+
+	return (cycle_t)uv_read_local_mmr(UVH_RTC | offset);
 }
 
 /*
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 296aba4..15578f1 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -467,6 +467,9 @@
 		return -EOPNOTSUPP;
 
 	addr &= KVM_PIT_CHANNEL_MASK;
+	if (addr == 3)
+		return 0;
+
 	s = &pit_state->channels[addr];
 
 	mutex_lock(&pit_state->lock);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 3063a0c..ba8c045 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -373,6 +373,12 @@
 		if (unlikely(!apic_enabled(apic)))
 			break;
 
+		if (trig_mode) {
+			apic_debug("level trig mode for vector %d", vector);
+			apic_set_vector(vector, apic->regs + APIC_TMR);
+		} else
+			apic_clear_vector(vector, apic->regs + APIC_TMR);
+
 		result = !apic_test_and_set_irr(vector, apic);
 		trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
 					  trig_mode, vector, !result);
@@ -383,11 +389,6 @@
 			break;
 		}
 
-		if (trig_mode) {
-			apic_debug("level trig mode for vector %d", vector);
-			apic_set_vector(vector, apic->regs + APIC_TMR);
-		} else
-			apic_clear_vector(vector, apic->regs + APIC_TMR);
 		kvm_vcpu_kick(vcpu);
 		break;
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 4c3e5b2..89a49fb 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -477,7 +477,7 @@
 
 	addr = gfn_to_hva(kvm, gfn);
 	if (kvm_is_error_hva(addr))
-		return page_size;
+		return PT_PAGE_TABLE_LEVEL;
 
 	down_read(&current->mm->mmap_sem);
 	vma = find_vma(current->mm, addr);
@@ -515,11 +515,9 @@
 	if (host_level == PT_PAGE_TABLE_LEVEL)
 		return host_level;
 
-	for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) {
-
+	for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level)
 		if (has_wrprotected_page(vcpu->kvm, large_gfn, level))
 			break;
-	}
 
 	return level - 1;
 }
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 58a0f1e..ede2131 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -150,7 +150,9 @@
 		walker->table_gfn[walker->level - 1] = table_gfn;
 		walker->pte_gpa[walker->level - 1] = pte_gpa;
 
-		kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
+		if (kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte)))
+			goto not_present;
+
 		trace_kvm_mmu_paging_element(pte, walker->level);
 
 		if (!is_present_gpte(pte))
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6651dbf..a1e1bc9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -670,7 +670,7 @@
 {
 	static int version;
 	struct pvclock_wall_clock wc;
-	struct timespec now, sys, boot;
+	struct timespec boot;
 
 	if (!wall_clock)
 		return;
@@ -685,9 +685,7 @@
 	 * wall clock specified here.  guest system time equals host
 	 * system time for us, thus we must fill in host boot time here.
 	 */
-	now = current_kernel_time();
-	ktime_get_ts(&sys);
-	boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys));
+	getboottime(&boot);
 
 	wc.sec = boot.tv_sec;
 	wc.nsec = boot.tv_nsec;
@@ -762,6 +760,7 @@
 	local_irq_save(flags);
 	kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
 	ktime_get_ts(&ts);
+	monotonic_to_bootbased(&ts);
 	local_irq_restore(flags);
 
 	/* With all the info we got, fill in the values */
@@ -5072,12 +5071,13 @@
 				       GFP_KERNEL);
 	if (!vcpu->arch.mce_banks) {
 		r = -ENOMEM;
-		goto fail_mmu_destroy;
+		goto fail_free_lapic;
 	}
 	vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
 
 	return 0;
-
+fail_free_lapic:
+	kvm_free_lapic(vcpu);
 fail_mmu_destroy:
 	kvm_mmu_destroy(vcpu);
 fail_free_pio_data:
@@ -5088,6 +5088,7 @@
 
 void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 {
+	kfree(vcpu->arch.mce_banks);
 	kvm_free_lapic(vcpu);
 	down_read(&vcpu->kvm->slots_lock);
 	kvm_mmu_destroy(vcpu);
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index 71da1bc..738e659 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -18,7 +18,7 @@
 #else
 	/*
 	 * With get_user_pages_fast, we walk down the pagetables without taking
-	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * any locks.  For this we would like to load the pointers atomically,
 	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
 	 * we do have is the guarantee that a pte will only either go from not
 	 * present to present, or present to not present or both -- it will not
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 5198b9b..69ddfbd 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -49,6 +49,7 @@
 #include <asm/numa.h>
 #include <asm/cacheflush.h>
 #include <asm/init.h>
+#include <linux/bootmem.h>
 
 static unsigned long dma_reserve __initdata;
 
@@ -616,6 +617,21 @@
  */
 #ifdef CONFIG_MEMORY_HOTPLUG
 /*
+ * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need
+ * updating.
+ */
+static void  update_end_of_memory_vars(u64 start, u64 size)
+{
+	unsigned long end_pfn = PFN_UP(start + size);
+
+	if (end_pfn > max_pfn) {
+		max_pfn = end_pfn;
+		max_low_pfn = end_pfn;
+		high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+	}
+}
+
+/*
  * Memory is added always to NORMAL zone. This means you will never get
  * additional DMA/DMA32 memory.
  */
@@ -634,6 +650,9 @@
 	ret = __add_pages(nid, zone, start_pfn, nr_pages);
 	WARN_ON_ONCE(ret);
 
+	/* update max_pfn, max_low_pfn and high_memory */
+	update_end_of_memory_vars(start, size);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(arch_add_memory);
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index c0f6198..536fb68 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -538,14 +538,15 @@
 kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args)
 {
 	struct die_args *arg = args;
+	unsigned long* dr6_p = (unsigned long *)ERR_PTR(arg->err);
 
-	if (val == DIE_DEBUG && (arg->err & DR_STEP))
-		if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+	if (val == DIE_DEBUG && (*dr6_p & DR_STEP))
+		if (post_kmmio_handler(*dr6_p, arg->regs) == 1) {
 			/*
 			 * Reset the BS bit in dr6 (pointed by args->err) to
 			 * denote completion of processing
 			 */
-			(*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
+			*dr6_p &= ~DR_STEP;
 			return NOTIFY_STOP;
 		}
 
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index a271241..28c6876 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -229,9 +229,11 @@
 			printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
 	}
 
-	if (changed)
+	if (changed) {
+		node_set(node, cpu_nodes_parsed);
 		printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
 				 nd->start, nd->end);
+	}
 }
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index cb88b1a..3347f69 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -222,7 +222,7 @@
 
 	/* move to next set */
 	si += model->num_counters;
-	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+	if ((si >= model->num_virt_counters) || (counter_config[si].count == 0))
 		per_cpu(switch_index, cpu) = 0;
 	else
 		per_cpu(switch_index, cpu) = si;
@@ -598,6 +598,7 @@
 	case 15: case 23:
 		*cpu_type = "i386/core_2";
 		break;
+	case 0x2e:
 	case 26:
 		spec = &op_arch_perfmon_spec;
 		*cpu_type = "i386/core_i7";
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 564b008..39fba37 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -15,7 +15,7 @@
 
 obj-y				+= common.o early.o
 obj-y				+= amd_bus.o
-obj-$(CONFIG_X86_64)		+= bus_numa.o intel_bus.o
+obj-$(CONFIG_X86_64)		+= bus_numa.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c
deleted file mode 100644
index f81a2fa..0000000
--- a/arch/x86/pci/intel_bus.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * to read io range from IOH pci conf, need to do it after mmconfig is there
- */
-
-#include <linux/delay.h>
-#include <linux/dmi.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/pci_x86.h>
-
-#include "bus_numa.h"
-
-static inline void print_ioh_resources(struct pci_root_info *info)
-{
-	int res_num;
-	int busnum;
-	int i;
-
-	printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n",
-			info->bus_min, info->bus_max);
-	res_num = info->res_num;
-	busnum = info->bus_min;
-	for (i = 0; i < res_num; i++) {
-		struct resource *res;
-
-		res = &info->res[i];
-		printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n",
-			busnum, i,
-			(res->flags & IORESOURCE_IO) ? "io port" :
-							"mmio",
-			res->start, res->end);
-	}
-}
-
-#define IOH_LIO			0x108
-#define IOH_LMMIOL		0x10c
-#define IOH_LMMIOH		0x110
-#define IOH_LMMIOH_BASEU	0x114
-#define IOH_LMMIOH_LIMITU	0x118
-#define IOH_LCFGBUS		0x11c
-
-static void __devinit pci_root_bus_res(struct pci_dev *dev)
-{
-	u16 word;
-	u32 dword;
-	struct pci_root_info *info;
-	u16 io_base, io_end;
-	u32 mmiol_base, mmiol_end;
-	u64 mmioh_base, mmioh_end;
-	int bus_base, bus_end;
-
-	/* some sys doesn't get mmconf enabled */
-	if (dev->cfg_size < 0x120)
-		return;
-
-	if (pci_root_num >= PCI_ROOT_NR) {
-		printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
-		return;
-	}
-
-	info = &pci_root_info[pci_root_num];
-	pci_root_num++;
-
-	pci_read_config_word(dev, IOH_LCFGBUS, &word);
-	bus_base = (word & 0xff);
-	bus_end = (word & 0xff00) >> 8;
-	sprintf(info->name, "PCI Bus #%02x", bus_base);
-	info->bus_min = bus_base;
-	info->bus_max = bus_end;
-
-	pci_read_config_word(dev, IOH_LIO, &word);
-	io_base = (word & 0xf0) << (12 - 4);
-	io_end = (word & 0xf000) | 0xfff;
-	update_res(info, io_base, io_end, IORESOURCE_IO, 0);
-
-	pci_read_config_dword(dev, IOH_LMMIOL, &dword);
-	mmiol_base = (dword & 0xff00) << (24 - 8);
-	mmiol_end = (dword & 0xff000000) | 0xffffff;
-	update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0);
-
-	pci_read_config_dword(dev, IOH_LMMIOH, &dword);
-	mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10);
-	mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff);
-	pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword);
-	mmioh_base |= ((u64)(dword & 0x7ffff)) << 32;
-	pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword);
-	mmioh_end |= ((u64)(dword & 0x7ffff)) << 32;
-	update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0);
-
-	print_ioh_resources(info);
-}
-
-/* intel IOH */
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 2b26dd5..36daccb 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1151,9 +1151,13 @@
 
 	/* keep using Xen gdt for now; no urgent need to change it */
 
+#ifdef CONFIG_X86_32
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
 		pv_info.kernel_rpl = 0;
+#else
+	pv_info.kernel_rpl = 0;
+#endif
 
 	/* set the limit of our address space */
 	xen_reserve_top();
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 1fa2654..e7dbbaf 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -147,16 +147,16 @@
 		return -EINVAL;
 
 	blkcg = cgroup_to_blkio_cgroup(cgroup);
+	spin_lock(&blkio_list_lock);
 	spin_lock_irq(&blkcg->lock);
 	blkcg->weight = (unsigned int)val;
 	hlist_for_each_entry(blkg, n, &blkcg->blkg_list, blkcg_node) {
-		spin_lock(&blkio_list_lock);
 		list_for_each_entry(blkiop, &blkio_list, list)
 			blkiop->ops.blkio_update_group_weight_fn(blkg,
 					blkcg->weight);
-		spin_unlock(&blkio_list_lock);
 	}
 	spin_unlock_irq(&blkcg->lock);
+	spin_unlock(&blkio_list_lock);
 	return 0;
 }
 
diff --git a/block/blk-core.c b/block/blk-core.c
index 718897e6..d1a9a0a 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1147,7 +1147,7 @@
  */
 static inline bool queue_should_plug(struct request_queue *q)
 {
-	return !(blk_queue_nonrot(q) && blk_queue_queuing(q));
+	return !(blk_queue_nonrot(q) && blk_queue_tagged(q));
 }
 
 static int __make_request(struct request_queue *q, struct bio *bio)
@@ -1859,15 +1859,8 @@
 	 * and to it is freed is accounted as io that is in progress at
 	 * the driver side.
 	 */
-	if (blk_account_rq(rq)) {
+	if (blk_account_rq(rq))
 		q->in_flight[rq_is_sync(rq)]++;
-		/*
-		 * Mark this device as supporting hardware queuing, if
-		 * we have more IOs in flight than 4.
-		 */
-		if (!blk_queue_queuing(q) && queue_in_flight(q) > 4)
-			set_bit(QUEUE_FLAG_CQ, &q->queue_flags);
-	}
 }
 
 /**
diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index cbdabb0..98e6bf6 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -39,8 +39,6 @@
 
 	if (atomic_long_dec_and_test(&ioc->refcount)) {
 		rcu_read_lock();
-		if (ioc->aic && ioc->aic->dtor)
-			ioc->aic->dtor(ioc->aic);
 		cfq_dtor(ioc);
 		rcu_read_unlock();
 
@@ -76,8 +74,6 @@
 	task_unlock(task);
 
 	if (atomic_dec_and_test(&ioc->nr_tasks)) {
-		if (ioc->aic && ioc->aic->exit)
-			ioc->aic->exit(ioc->aic);
 		cfq_exit(ioc);
 
 	}
@@ -97,7 +93,6 @@
 		ret->ioprio = 0;
 		ret->last_waited = jiffies; /* doesn't matter... */
 		ret->nr_batch_requests = 0; /* because this is 0 */
-		ret->aic = NULL;
 		INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH);
 		INIT_HLIST_HEAD(&ret->cic_list);
 		ret->ioc_data = NULL;
diff --git a/block/blk-settings.c b/block/blk-settings.c
index d52d4ad..5eeb9e0 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -528,7 +528,7 @@
 		     sector_t offset)
 {
 	sector_t alignment;
-	unsigned int top, bottom;
+	unsigned int top, bottom, ret = 0;
 
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
@@ -546,6 +546,8 @@
 	t->max_segment_size = min_not_zero(t->max_segment_size,
 					   b->max_segment_size);
 
+	t->misaligned |= b->misaligned;
+
 	alignment = queue_limit_alignment_offset(b, offset);
 
 	/* Bottom device has different alignment.  Check that it is
@@ -558,8 +560,10 @@
 		bottom = max(b->physical_block_size, b->io_min) + alignment;
 
 		/* Verify that top and bottom intervals line up */
-		if (max(top, bottom) & (min(top, bottom) - 1))
+		if (max(top, bottom) & (min(top, bottom) - 1)) {
 			t->misaligned = 1;
+			ret = -1;
+		}
 	}
 
 	t->logical_block_size = max(t->logical_block_size,
@@ -578,18 +582,21 @@
 	if (t->physical_block_size & (t->logical_block_size - 1)) {
 		t->physical_block_size = t->logical_block_size;
 		t->misaligned = 1;
+		ret = -1;
 	}
 
 	/* Minimum I/O a multiple of the physical block size? */
 	if (t->io_min & (t->physical_block_size - 1)) {
 		t->io_min = t->physical_block_size;
 		t->misaligned = 1;
+		ret = -1;
 	}
 
 	/* Optimal I/O a multiple of the physical block size? */
 	if (t->io_opt & (t->physical_block_size - 1)) {
 		t->io_opt = 0;
 		t->misaligned = 1;
+		ret = -1;
 	}
 
 	/* Find lowest common alignment_offset */
@@ -597,8 +604,10 @@
 		& (max(t->physical_block_size, t->io_min) - 1);
 
 	/* Verify that new alignment_offset is on a logical block boundary */
-	if (t->alignment_offset & (t->logical_block_size - 1))
+	if (t->alignment_offset & (t->logical_block_size - 1)) {
 		t->misaligned = 1;
+		ret = -1;
+	}
 
 	/* Discard alignment and granularity */
 	if (b->discard_granularity) {
@@ -626,11 +635,33 @@
 			(t->discard_granularity - 1);
 	}
 
-	return t->misaligned ? -1 : 0;
+	return ret;
 }
 EXPORT_SYMBOL(blk_stack_limits);
 
 /**
+ * bdev_stack_limits - adjust queue limits for stacked drivers
+ * @t:	the stacking driver limits (top device)
+ * @bdev:  the component block_device (bottom)
+ * @start:  first data sector within component device
+ *
+ * Description:
+ *    Merges queue limits for a top device and a block_device.  Returns
+ *    0 if alignment didn't change.  Returns -1 if adding the bottom
+ *    device caused misalignment.
+ */
+int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+		      sector_t start)
+{
+	struct request_queue *bq = bdev_get_queue(bdev);
+
+	start += get_start_sect(bdev);
+
+	return blk_stack_limits(t, &bq->limits, start << 9);
+}
+EXPORT_SYMBOL(bdev_stack_limits);
+
+/**
  * disk_stack_limits - adjust queue limits for stacked drivers
  * @disk:  MD/DM gendisk (top)
  * @bdev:  the underlying block device (bottom)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 918c7fd..023f4e6 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -42,16 +42,13 @@
  */
 #define CFQ_MIN_TT		(2)
 
-/*
- * Allow merged cfqqs to perform this amount of seeky I/O before
- * deciding to break the queues up again.
- */
-#define CFQQ_COOP_TOUT		(HZ)
-
 #define CFQ_SLICE_SCALE		(5)
 #define CFQ_HW_QUEUE_MIN	(5)
 #define CFQ_SERVICE_SHIFT       12
 
+#define CFQQ_SEEK_THR		8 * 1024
+#define CFQQ_SEEKY(cfqq)	((cfqq)->seek_mean > CFQQ_SEEK_THR)
+
 #define RQ_CIC(rq)		\
 	((struct cfq_io_context *) (rq)->elevator_private)
 #define RQ_CFQQ(rq)		(struct cfq_queue *) ((rq)->elevator_private2)
@@ -137,7 +134,6 @@
 	u64 seek_total;
 	sector_t seek_mean;
 	sector_t last_request_pos;
-	unsigned long seeky_start;
 
 	pid_t pid;
 
@@ -314,6 +310,7 @@
 	CFQ_CFQQ_FLAG_slice_new,	/* no requests dispatched in slice */
 	CFQ_CFQQ_FLAG_sync,		/* synchronous queue */
 	CFQ_CFQQ_FLAG_coop,		/* cfqq is shared */
+	CFQ_CFQQ_FLAG_split_coop,	/* shared cfqq will be splitted */
 	CFQ_CFQQ_FLAG_deep,		/* sync cfqq experienced large depth */
 	CFQ_CFQQ_FLAG_wait_busy,	/* Waiting for next request */
 };
@@ -342,6 +339,7 @@
 CFQ_CFQQ_FNS(slice_new);
 CFQ_CFQQ_FNS(sync);
 CFQ_CFQQ_FNS(coop);
+CFQ_CFQQ_FNS(split_coop);
 CFQ_CFQQ_FNS(deep);
 CFQ_CFQQ_FNS(wait_busy);
 #undef CFQ_CFQQ_FNS
@@ -1566,6 +1564,15 @@
 	cfq_clear_cfqq_wait_busy(cfqq);
 
 	/*
+	 * If this cfqq is shared between multiple processes, check to
+	 * make sure that those processes are still issuing I/Os within
+	 * the mean seek distance.  If not, it may be time to break the
+	 * queues apart again.
+	 */
+	if (cfq_cfqq_coop(cfqq) && CFQQ_SEEKY(cfqq))
+		cfq_mark_cfqq_split_coop(cfqq);
+
+	/*
 	 * store what was left of this slice, if the queue idled/timed out
 	 */
 	if (timed_out && !cfq_cfqq_slice_new(cfqq)) {
@@ -1663,9 +1670,6 @@
 		return cfqd->last_position - blk_rq_pos(rq);
 }
 
-#define CFQQ_SEEK_THR		8 * 1024
-#define CFQQ_SEEKY(cfqq)	((cfqq)->seek_mean > CFQQ_SEEK_THR)
-
 static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 			       struct request *rq, bool for_preempt)
 {
@@ -1803,7 +1807,7 @@
 	 * Otherwise, we do only if they are the last ones
 	 * in their service tree.
 	 */
-	return service_tree->count == 1;
+	return service_tree->count == 1 && cfq_cfqq_sync(cfqq);
 }
 
 static void cfq_arm_slice_timer(struct cfq_data *cfqd)
@@ -3000,19 +3004,6 @@
 	total = cfqq->seek_total + (cfqq->seek_samples/2);
 	do_div(total, cfqq->seek_samples);
 	cfqq->seek_mean = (sector_t)total;
-
-	/*
-	 * If this cfqq is shared between multiple processes, check to
-	 * make sure that those processes are still issuing I/Os within
-	 * the mean seek distance.  If not, it may be time to break the
-	 * queues apart again.
-	 */
-	if (cfq_cfqq_coop(cfqq)) {
-		if (CFQQ_SEEKY(cfqq) && !cfqq->seeky_start)
-			cfqq->seeky_start = jiffies;
-		else if (!CFQQ_SEEKY(cfqq))
-			cfqq->seeky_start = 0;
-	}
 }
 
 /*
@@ -3077,6 +3068,12 @@
 		return true;
 
 	/*
+	 * Don't allow a non-RT request to preempt an ongoing RT cfqq timeslice.
+	 */
+	if (cfq_class_rt(cfqq) && !cfq_class_rt(new_cfqq))
+		return false;
+
+	/*
 	 * if the new request is sync, but the currently running queue is
 	 * not, let the sync request have priority.
 	 */
@@ -3447,14 +3444,6 @@
 	return cic_to_cfqq(cic, 1);
 }
 
-static int should_split_cfqq(struct cfq_queue *cfqq)
-{
-	if (cfqq->seeky_start &&
-	    time_after(jiffies, cfqq->seeky_start + CFQQ_COOP_TOUT))
-		return 1;
-	return 0;
-}
-
 /*
  * Returns NULL if a new cfqq should be allocated, or the old cfqq if this
  * was the last process referring to said cfqq.
@@ -3463,9 +3452,9 @@
 split_cfqq(struct cfq_io_context *cic, struct cfq_queue *cfqq)
 {
 	if (cfqq_process_refs(cfqq) == 1) {
-		cfqq->seeky_start = 0;
 		cfqq->pid = current->pid;
 		cfq_clear_cfqq_coop(cfqq);
+		cfq_clear_cfqq_split_coop(cfqq);
 		return cfqq;
 	}
 
@@ -3504,7 +3493,7 @@
 		/*
 		 * If the queue was seeky for too long, break it apart.
 		 */
-		if (cfq_cfqq_coop(cfqq) && should_split_cfqq(cfqq)) {
+		if (cfq_cfqq_coop(cfqq) && cfq_cfqq_split_coop(cfqq)) {
 			cfq_log_cfqq(cfqd, cfqq, "breaking apart cfqq");
 			cfqq = split_cfqq(cic, cfqq);
 			if (!cfqq)
diff --git a/block/genhd.c b/block/genhd.c
index b11a4ad..d13ba76 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -867,7 +867,7 @@
 {
 	struct gendisk *disk = dev_to_disk(dev);
 
-	return sprintf(buf, "%u\n", queue_discard_alignment(disk->queue));
+	return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue));
 }
 
 static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index 97991ac..7e52295 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -208,7 +208,7 @@
 		 * the mechanism only works when all CPUs have RT task running,
 		 * as if one CPU hasn't RT task, RT task from other CPUs will
 		 * borrow CPU time from this CPU and cause RT task use > 95%
-		 * CPU time. To make 'avoid staration' work, takes a nap here.
+		 * CPU time. To make 'avoid starvation' work, takes a nap here.
 		 */
 		if (do_sleep)
 			schedule_timeout_killable(HZ * idle_pct / 100);
@@ -222,14 +222,18 @@
 static unsigned int ps_tsk_num;
 static int create_power_saving_task(void)
 {
+	int rc = -ENOMEM;
+
 	ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
 		(void *)(unsigned long)ps_tsk_num,
 		"power_saving/%d", ps_tsk_num);
-	if (ps_tsks[ps_tsk_num]) {
+	rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0;
+	if (!rc)
 		ps_tsk_num++;
-		return 0;
-	}
-	return -EINVAL;
+	else
+		ps_tsks[ps_tsk_num] = NULL;
+
+	return rc;
 }
 
 static void destroy_power_saving_task(void)
@@ -237,6 +241,7 @@
 	if (ps_tsk_num > 0) {
 		ps_tsk_num--;
 		kthread_stop(ps_tsks[ps_tsk_num]);
+		ps_tsks[ps_tsk_num] = NULL;
 	}
 }
 
@@ -253,7 +258,7 @@
 	}
 }
 
-static int acpi_pad_idle_cpus(unsigned int num_cpus)
+static void acpi_pad_idle_cpus(unsigned int num_cpus)
 {
 	get_online_cpus();
 
@@ -261,7 +266,6 @@
 	set_power_saving_task_num(num_cpus);
 
 	put_online_cpus();
-	return 0;
 }
 
 static uint32_t acpi_pad_idle_cpus_num(void)
@@ -369,19 +373,21 @@
 static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
 {
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	acpi_status status;
 	union acpi_object *package;
 	int rev, num, ret = -EINVAL;
 
-	status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer);
-	if (ACPI_FAILURE(status))
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer)))
 		return -EINVAL;
+
+	if (!buffer.length || !buffer.pointer)
+		return -EINVAL;
+
 	package = buffer.pointer;
 	if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
 		goto out;
 	rev = package->package.elements[0].integer.value;
 	num = package->package.elements[1].integer.value;
-	if (rev != 1)
+	if (rev != 1 || num < 0)
 		goto out;
 	*num_cpus = num;
 	ret = 0;
@@ -410,7 +416,7 @@
 
 static void acpi_pad_handle_notify(acpi_handle handle)
 {
-	int num_cpus, ret;
+	int num_cpus;
 	uint32_t idle_cpus;
 
 	mutex_lock(&isolated_cpus_lock);
@@ -418,12 +424,9 @@
 		mutex_unlock(&isolated_cpus_lock);
 		return;
 	}
-	ret = acpi_pad_idle_cpus(num_cpus);
+	acpi_pad_idle_cpus(num_cpus);
 	idle_cpus = acpi_pad_idle_cpus_num();
-	if (!ret)
-		acpi_pad_ost(handle, 0, idle_cpus);
-	else
-		acpi_pad_ost(handle, 1, 0);
+	acpi_pad_ost(handle, 0, idle_cpus);
 	mutex_unlock(&isolated_cpus_lock);
 }
 
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index cf761b9..a52126e 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -490,9 +490,14 @@
 
 	capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
 	capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */
-#ifdef CONFIG_ACPI_PROCESSOR_AGGREGATOR
+#if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\
+			defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE)
 	capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT;
 #endif
+
+#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE)
+	capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT;
+#endif
 	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
 		return;
 	if (ACPI_SUCCESS(acpi_run_osc(handle, &context)))
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index bbc2c13..b2586f5 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -935,6 +935,7 @@
 	struct platform_device *dd;
 
 	id = dock_station_count;
+	memset(&ds, 0, sizeof(ds));
 	dd = platform_device_register_data(NULL, "dock", id, &ds, sizeof(ds));
 	if (IS_ERR(dd))
 		return PTR_ERR(dd);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index fd1801b..d6471bb 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -201,14 +201,13 @@
 	spin_unlock_irqrestore(&ec->curr_lock, flags);
 }
 
-static void acpi_ec_gpe_query(void *ec_cxt);
+static int acpi_ec_sync_query(struct acpi_ec *ec);
 
-static int ec_check_sci(struct acpi_ec *ec, u8 state)
+static int ec_check_sci_sync(struct acpi_ec *ec, u8 state)
 {
 	if (state & ACPI_EC_FLAG_SCI) {
 		if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
-			return acpi_os_execute(OSL_EC_BURST_HANDLER,
-				acpi_ec_gpe_query, ec);
+			return acpi_ec_sync_query(ec);
 	}
 	return 0;
 }
@@ -249,11 +248,6 @@
 {
 	unsigned long tmp;
 	int ret = 0;
-	pr_debug(PREFIX "transaction start\n");
-	/* disable GPE during transaction if storm is detected */
-	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
-		acpi_disable_gpe(NULL, ec->gpe);
-	}
 	if (EC_FLAGS_MSI)
 		udelay(ACPI_EC_MSI_UDELAY);
 	/* start transaction */
@@ -265,20 +259,9 @@
 		clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
 	spin_unlock_irqrestore(&ec->curr_lock, tmp);
 	ret = ec_poll(ec);
-	pr_debug(PREFIX "transaction end\n");
 	spin_lock_irqsave(&ec->curr_lock, tmp);
 	ec->curr = NULL;
 	spin_unlock_irqrestore(&ec->curr_lock, tmp);
-	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
-		/* check if we received SCI during transaction */
-		ec_check_sci(ec, acpi_ec_read_status(ec));
-		/* it is safe to enable GPE outside of transaction */
-		acpi_enable_gpe(NULL, ec->gpe);
-	} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
-		pr_info(PREFIX "GPE storm detected, "
-			"transactions will use polling mode\n");
-		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
-	}
 	return ret;
 }
 
@@ -321,7 +304,26 @@
 		status = -ETIME;
 		goto end;
 	}
+	pr_debug(PREFIX "transaction start\n");
+	/* disable GPE during transaction if storm is detected */
+	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+		acpi_disable_gpe(NULL, ec->gpe);
+	}
+
 	status = acpi_ec_transaction_unlocked(ec, t);
+
+	/* check if we received SCI during transaction */
+	ec_check_sci_sync(ec, acpi_ec_read_status(ec));
+	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
+		msleep(1);
+		/* it is safe to enable GPE outside of transaction */
+		acpi_enable_gpe(NULL, ec->gpe);
+	} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+		pr_info(PREFIX "GPE storm detected, "
+			"transactions will use polling mode\n");
+		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
+	}
+	pr_debug(PREFIX "transaction end\n");
 end:
 	if (ec->global_lock)
 		acpi_release_global_lock(glk);
@@ -443,7 +445,7 @@
 
 EXPORT_SYMBOL(ec_transaction);
 
-static int acpi_ec_query(struct acpi_ec *ec, u8 * data)
+static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
 {
 	int result;
 	u8 d;
@@ -452,20 +454,16 @@
 				.wlen = 0, .rlen = 1};
 	if (!ec || !data)
 		return -EINVAL;
-
 	/*
 	 * Query the EC to find out which _Qxx method we need to evaluate.
 	 * Note that successful completion of the query causes the ACPI_EC_SCI
 	 * bit to be cleared (and thus clearing the interrupt source).
 	 */
-
-	result = acpi_ec_transaction(ec, &t);
+	result = acpi_ec_transaction_unlocked(ec, &t);
 	if (result)
 		return result;
-
 	if (!d)
 		return -ENODATA;
-
 	*data = d;
 	return 0;
 }
@@ -509,43 +507,79 @@
 
 EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
 
-static void acpi_ec_gpe_query(void *ec_cxt)
+static void acpi_ec_run(void *cxt)
 {
-	struct acpi_ec *ec = ec_cxt;
-	u8 value = 0;
-	struct acpi_ec_query_handler *handler, copy;
-
-	if (!ec || acpi_ec_query(ec, &value))
+	struct acpi_ec_query_handler *handler = cxt;
+	if (!handler)
 		return;
-	mutex_lock(&ec->lock);
+	pr_debug(PREFIX "start query execution\n");
+	if (handler->func)
+		handler->func(handler->data);
+	else if (handler->handle)
+		acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
+	pr_debug(PREFIX "stop query execution\n");
+	kfree(handler);
+}
+
+static int acpi_ec_sync_query(struct acpi_ec *ec)
+{
+	u8 value = 0;
+	int status;
+	struct acpi_ec_query_handler *handler, *copy;
+	if ((status = acpi_ec_query_unlocked(ec, &value)))
+		return status;
 	list_for_each_entry(handler, &ec->list, node) {
 		if (value == handler->query_bit) {
 			/* have custom handler for this bit */
-			memcpy(&copy, handler, sizeof(copy));
-			mutex_unlock(&ec->lock);
-			if (copy.func) {
-				copy.func(copy.data);
-			} else if (copy.handle) {
-				acpi_evaluate_object(copy.handle, NULL, NULL, NULL);
-			}
-			return;
+			copy = kmalloc(sizeof(*handler), GFP_KERNEL);
+			if (!copy)
+				return -ENOMEM;
+			memcpy(copy, handler, sizeof(*copy));
+			pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value);
+			return acpi_os_execute((copy->func) ?
+				OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER,
+				acpi_ec_run, copy);
 		}
 	}
+	return 0;
+}
+
+static void acpi_ec_gpe_query(void *ec_cxt)
+{
+	struct acpi_ec *ec = ec_cxt;
+	if (!ec)
+		return;
+	mutex_lock(&ec->lock);
+	acpi_ec_sync_query(ec);
 	mutex_unlock(&ec->lock);
 }
 
+static void acpi_ec_gpe_query(void *ec_cxt);
+
+static int ec_check_sci(struct acpi_ec *ec, u8 state)
+{
+	if (state & ACPI_EC_FLAG_SCI) {
+		if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) {
+			pr_debug(PREFIX "push gpe query to the queue\n");
+			return acpi_os_execute(OSL_NOTIFY_HANDLER,
+				acpi_ec_gpe_query, ec);
+		}
+	}
+	return 0;
+}
+
 static u32 acpi_ec_gpe_handler(void *data)
 {
 	struct acpi_ec *ec = data;
-	u8 status;
 
 	pr_debug(PREFIX "~~~> interrupt\n");
-	status = acpi_ec_read_status(ec);
 
-	advance_transaction(ec, status);
-	if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
+	advance_transaction(ec, acpi_ec_read_status(ec));
+	if (ec_transaction_done(ec) &&
+	    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
 		wake_up(&ec->wait);
-	ec_check_sci(ec, status);
+		ec_check_sci(ec, acpi_ec_read_status(ec));
+	}
 	return ACPI_INTERRUPT_HANDLED;
 }
 
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 394ae89..04b0f00 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -56,7 +56,7 @@
 static int acpi_pci_link_add(struct acpi_device *device);
 static int acpi_pci_link_remove(struct acpi_device *device, int type);
 
-static struct acpi_device_id link_device_ids[] = {
+static const struct acpi_device_id link_device_ids[] = {
 	{"PNP0C0F", 0},
 	{"", 0},
 };
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 101cce3..64f55b6 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -46,7 +46,7 @@
 static int acpi_pci_root_remove(struct acpi_device *device, int type);
 static int acpi_pci_root_start(struct acpi_device *device);
 
-static struct acpi_device_id root_device_ids[] = {
+static const struct acpi_device_id root_device_ids[] = {
 	{"PNP0A03", 0},
 	{"", 0},
 };
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 22b2979..0f30c3c 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -65,7 +65,7 @@
 static int acpi_power_resume(struct acpi_device *device);
 static int acpi_power_open_fs(struct inode *inode, struct file *file);
 
-static struct acpi_device_id power_device_ids[] = {
+static const struct acpi_device_id power_device_ids[] = {
 	{ACPI_POWER_HID, 0},
 	{"", 0},
 };
diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c
index 2ef7030..dc4ffad 100644
--- a/drivers/acpi/power_meter.c
+++ b/drivers/acpi/power_meter.c
@@ -64,7 +64,7 @@
 	return force_cap_on || cap_in_hardware;
 }
 
-static struct acpi_device_id power_meter_ids[] = {
+static const struct acpi_device_id power_meter_ids[] = {
 	{"ACPI000D", 0},
 	{"", 0},
 };
@@ -534,6 +534,7 @@
 
 	kfree(resource->domain_devices);
 	kobject_put(resource->holders_dir);
+	resource->num_domain_devices = 0;
 }
 
 static int read_domain_devices(struct acpi_power_meter_resource *resource)
@@ -740,7 +741,6 @@
 
 	return res;
 error:
-	remove_domain_devices(resource);
 	remove_attrs(resource);
 	return res;
 }
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index d1676b1..cc978a8 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -110,6 +110,14 @@
 	  DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
 	  DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
 	 (void *)2},
+	{ set_max_cstate, "Pavilion zv5000", {
+	  DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
+	 (void *)1},
+	{ set_max_cstate, "Asus L8400B", {
+	  DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
+	 (void *)1},
 	{},
 };
 
@@ -305,6 +313,28 @@
 	pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
 	pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
 
+	/*
+	 * FADT specified C2 latency must be less than or equal to
+	 * 100 microseconds.
+	 */
+	if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			"C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency));
+		/* invalidate C2 */
+		pr->power.states[ACPI_STATE_C2].address = 0;
+	}
+
+	/*
+	 * FADT supplied C3 latency must be less than or equal to
+	 * 1000 microseconds.
+	 */
+	if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			"C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency));
+		/* invalidate C3 */
+		pr->power.states[ACPI_STATE_C3].address = 0;
+	}
+
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "lvl2[0x%08x] lvl3[0x%08x]\n",
 			  pr->power.states[ACPI_STATE_C2].address,
@@ -494,33 +524,6 @@
 	return status;
 }
 
-static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
-{
-
-	if (!cx->address)
-		return;
-
-	/*
-	 * C2 latency must be less than or equal to 100
-	 * microseconds.
-	 */
-	else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "latency too large [%d]\n", cx->latency));
-		return;
-	}
-
-	/*
-	 * Otherwise we've met all of our C2 requirements.
-	 * Normalize the C2 latency to expidite policy
-	 */
-	cx->valid = 1;
-
-	cx->latency_ticks = cx->latency;
-
-	return;
-}
-
 static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 					   struct acpi_processor_cx *cx)
 {
@@ -532,16 +535,6 @@
 		return;
 
 	/*
-	 * C3 latency must be less than or equal to 1000
-	 * microseconds.
-	 */
-	else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "latency too large [%d]\n", cx->latency));
-		return;
-	}
-
-	/*
 	 * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
 	 * DMA transfers are used by any ISA device to avoid livelock.
 	 * Note that we could disable Type-F DMA (as recommended by
@@ -629,7 +622,10 @@
 			break;
 
 		case ACPI_STATE_C2:
-			acpi_processor_power_verify_c2(cx);
+			if (!cx->address)
+				break;
+			cx->valid = 1; 
+			cx->latency_ticks = cx->latency; /* Normalize latency */
 			break;
 
 		case ACPI_STATE_C3:
@@ -884,12 +880,14 @@
 		return(acpi_idle_enter_c1(dev, state));
 
 	local_irq_disable();
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we test
-	 * NEED_RESCHED:
-	 */
-	smp_mb();
+	if (cx->entry_method != ACPI_CSTATE_FFH) {
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we test
+		 * NEED_RESCHED:
+		 */
+		smp_mb();
+	}
 
 	if (unlikely(need_resched())) {
 		current_thread_info()->status |= TS_POLLING;
@@ -969,12 +967,14 @@
 	}
 
 	local_irq_disable();
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we test
-	 * NEED_RESCHED:
-	 */
-	smp_mb();
+	if (cx->entry_method != ACPI_CSTATE_FFH) {
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we test
+		 * NEED_RESCHED:
+		 */
+		smp_mb();
+	}
 
 	if (unlikely(need_resched())) {
 		current_thread_info()->status |= TS_POLLING;
diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c
index 30e4dc0..e306ba9 100644
--- a/drivers/acpi/processor_pdc.c
+++ b/drivers/acpi/processor_pdc.c
@@ -125,6 +125,8 @@
 	return status;
 }
 
+static int early_pdc_done;
+
 void acpi_processor_set_pdc(acpi_handle handle)
 {
 	struct acpi_object_list *obj_list;
@@ -132,6 +134,9 @@
 	if (arch_has_acpi_pdc() == false)
 		return;
 
+	if (early_pdc_done)
+		return;
+
 	obj_list = acpi_processor_alloc_pdc();
 	if (!obj_list)
 		return;
@@ -144,6 +149,36 @@
 }
 EXPORT_SYMBOL_GPL(acpi_processor_set_pdc);
 
+static int early_pdc_optin;
+static int set_early_pdc_optin(const struct dmi_system_id *id)
+{
+	early_pdc_optin = 1;
+	return 0;
+}
+
+static int param_early_pdc_optin(char *s)
+{
+	early_pdc_optin = 1;
+	return 1;
+}
+__setup("acpi_early_pdc_eval", param_early_pdc_optin);
+
+static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
+	{
+	set_early_pdc_optin, "HP Envy", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "HP Envy") }, NULL},
+	{
+	set_early_pdc_optin, "HP Pavilion dv6", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6") }, NULL},
+	{
+	set_early_pdc_optin, "HP Pavilion dv7", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Hewlett-Packard"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7") }, NULL},
+	{},
+};
+
 static acpi_status
 early_init_pdc(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
@@ -151,7 +186,7 @@
 	return AE_OK;
 }
 
-void acpi_early_processor_set_pdc(void)
+void __init acpi_early_processor_set_pdc(void)
 {
 	/*
 	 * Check whether the system is DMI table. If yes, OSPM
@@ -159,7 +194,16 @@
 	 */
 	dmi_check_system(processor_idle_dmi_table);
 
+	/*
+	 * Allow systems to opt-in to early _PDC evaluation.
+	 */
+	dmi_check_system(early_pdc_optin_table);
+	if (!early_pdc_optin)
+		return;
+
 	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
 			    ACPI_UINT32_MAX,
 			    early_init_pdc, NULL, NULL, NULL);
+
+	early_pdc_done = 1;
 }
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 2cabadc..a959f6a 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -413,7 +413,11 @@
 	if (result)
 		goto update_bios;
 
-	return 0;
+	/* We need to call _PPC once when cpufreq starts */
+	if (ignore_ppc != 1)
+		result = acpi_processor_get_platform_limit(pr);
+
+	return result;
 
 	/*
 	 * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 140c5c5..6deafb4 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -443,8 +443,7 @@
 #ifdef CONFIG_ACPI_PROCFS
 static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)
 {
-	struct acpi_processor *pr = (struct acpi_processor *)seq->private;
-
+	struct acpi_processor *pr = seq->private;
 
 	if (!pr)
 		goto end;
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index 52b9db8..b16ddbf 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -822,7 +822,10 @@
 
 static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
 {
+#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER)
 	struct acpi_battery *battery = &sbs->battery[id];
+#endif
+
 #ifdef CONFIG_ACPI_SYSFS_POWER
 	if (battery->bat.dev) {
 		if (battery->have_sysfs_alarm)
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index d933980..fd09229 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -242,7 +242,7 @@
 		case ACPI_SBS_CHARGER:
 		case ACPI_SBS_MANAGER:
 		case ACPI_SBS_BATTERY:
-			acpi_os_execute(OSL_GPE_HANDLER,
+			acpi_os_execute(OSL_NOTIFY_HANDLER,
 					acpi_smbus_callback, hc);
 		default:;
 	}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index ff9f622..3e00967 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1336,9 +1336,25 @@
 
 	if (child)
 		*child = device;
-	return 0;
+
+	if (device)
+		return 0;
+	else
+		return -ENODEV;
 }
 
+/*
+ * acpi_bus_add and acpi_bus_start
+ *
+ * scan a given ACPI tree and (probably recently hot-plugged)
+ * create and add or starts found devices.
+ *
+ * If no devices were found -ENODEV is returned which does not
+ * mean that this is a real error, there just have been no suitable
+ * ACPI objects in the table trunk from which the kernel could create
+ * a device and add/start an appropriate driver.
+ */
+
 int
 acpi_bus_add(struct acpi_device **child,
 	     struct acpi_device *parent, acpi_handle handle, int type)
@@ -1348,8 +1364,7 @@
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_add = 1;
 
-	acpi_bus_scan(handle, &ops, child);
-	return 0;
+	return acpi_bus_scan(handle, &ops, child);
 }
 EXPORT_SYMBOL(acpi_bus_add);
 
@@ -1357,11 +1372,13 @@
 {
 	struct acpi_bus_ops ops;
 
+	if (!device)
+		return -EINVAL;
+
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_start = 1;
 
-	acpi_bus_scan(device->handle, &ops, NULL);
-	return 0;
+	return acpi_bus_scan(device->handle, &ops, NULL);
 }
 EXPORT_SYMBOL(acpi_bus_start);
 
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index f336bca7..8a0ed28 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -213,7 +213,7 @@
 	unsigned long table_end;
 	acpi_size tbl_size;
 
-	if (acpi_disabled)
+	if (acpi_disabled && !acpi_ht)
 		return -ENODEV;
 
 	if (!handler)
@@ -280,7 +280,7 @@
 	struct acpi_table_header *table = NULL;
 	acpi_size tbl_size;
 
-	if (acpi_disabled)
+	if (acpi_disabled && !acpi_ht)
 		return -ENODEV;
 
 	if (!handler)
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 72e76b4..b765790 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -78,6 +78,13 @@
 static int brightness_switch_enabled = 1;
 module_param(brightness_switch_enabled, bool, 0644);
 
+/*
+ * By default, we don't allow duplicate ACPI video bus devices
+ * under the same VGA controller
+ */
+static int allow_duplicates;
+module_param(allow_duplicates, bool, 0644);
+
 static int register_count = 0;
 static int acpi_video_bus_add(struct acpi_device *device);
 static int acpi_video_bus_remove(struct acpi_device *device, int type);
@@ -2239,11 +2246,47 @@
 	return AE_OK;
 }
 
+static acpi_status
+acpi_video_bus_match(acpi_handle handle, u32 level, void *context,
+			void **return_value)
+{
+	struct acpi_device *device = context;
+	struct acpi_device *sibling;
+	int result;
+
+	if (handle == device->handle)
+		return AE_CTRL_TERMINATE;
+
+	result = acpi_bus_get_device(handle, &sibling);
+	if (result)
+		return AE_OK;
+
+	if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME))
+			return AE_ALREADY_EXISTS;
+
+	return AE_OK;
+}
+
 static int acpi_video_bus_add(struct acpi_device *device)
 {
 	struct acpi_video_bus *video;
 	struct input_dev *input;
 	int error;
+	acpi_status status;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE,
+				device->parent->handle, 1,
+				acpi_video_bus_match, NULL,
+				device, NULL);
+	if (status == AE_ALREADY_EXISTS) {
+		printk(KERN_WARNING FW_BUG
+			"Duplicate ACPI video bus devices for the"
+			" same VGA controller, please try module "
+			"parameter \"video.allow_duplicates=1\""
+			"if the current driver doesn't work.\n");
+		if (!allow_duplicates)
+			return -ENODEV;
+	}
 
 	video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL);
 	if (!video)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b8bea10..b343903 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2868,6 +2868,21 @@
 			},
 			.driver_data = "F.23",	/* cutoff BIOS version */
 		},
+		/*
+		 * Acer eMachines G725 has the same problem.  BIOS
+		 * V1.03 is known to be broken.  V3.04 is known to
+		 * work.  Inbetween, there are V1.06, V2.06 and V3.03
+		 * that we don't have much idea about.  For now,
+		 * blacklist anything older than V3.04.
+		 */
+		{
+			.ident = "G725",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "eMachines"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "eMachines G725"),
+			},
+			.driver_data = "V3.04",	/* cutoff BIOS version */
+		},
 		{ }	/* terminate list */
 	};
 	const struct dmi_system_id *dmi = dmi_first_match(sysids);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0ea97c9..9f6cfac 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2028,8 +2028,9 @@
 			qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
 
 		/* determine whether the command is worth retrying */
-		if (!(qc->err_mask & AC_ERR_INVALID) &&
-		    ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV))
+		if (qc->flags & ATA_QCFLAG_IO ||
+		    (!(qc->err_mask & AC_ERR_INVALID) &&
+		     qc->err_mask != AC_ERR_DEV))
 			qc->flags |= ATA_QCFLAG_RETRY;
 
 		/* accumulate error info */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f4ea5a8..d096fbc 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2875,7 +2875,7 @@
 	 * write indication (used for PIO/DMA setup), result TF is
 	 * copied back and we don't whine too much about its failure.
 	 */
-	tf->flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
 	if (scmd->sc_data_direction == DMA_TO_DEVICE)
 		tf->flags |= ATA_TFLAG_WRITE;
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 741065c..730ef3c 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -893,6 +893,9 @@
 				       do_write);
 	}
 
+	if (!do_write)
+		flush_dcache_page(page);
+
 	qc->curbytes += qc->sect_size;
 	qc->cursg_ofs += qc->sect_size;
 
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 161746d..6e2c3b0 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -59,6 +59,8 @@
 	else
 		pr_debug("class '%s' does not have a release() function, "
 			 "be careful\n", class->name);
+
+	kfree(cp);
 }
 
 static struct sysfs_ops class_sysfs_ops = {
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 090dd48..42ae452 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -354,6 +354,7 @@
 {
 	int err;
 	struct vfsmount *mnt;
+	char options[] = "mode=0755";
 
 	err = register_filesystem(&dev_fs_type);
 	if (err) {
@@ -362,7 +363,7 @@
 		return err;
 	}
 
-	mnt = kern_mount_data(&dev_fs_type, "mode=0755");
+	mnt = kern_mount_data(&dev_fs_type, options);
 	if (IS_ERR(mnt)) {
 		err = PTR_ERR(mnt);
 		printk(KERN_ERR "devtmpfs: unable to create devtmpfs %i\n", err);
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index d7d77d4..bd02505 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -311,7 +311,7 @@
 static ssize_t
 print_block_size(struct class *class, char *buf)
 {
-	return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+	return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
 }
 
 static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 873e594..9291614 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -337,6 +337,9 @@
 	if (*pos > h->highest_lun)
 		return 0;
 
+	if (drv == NULL) /* it's possible for h->drv[] to have holes. */
+		return 0;
+
 	if (drv->heads == 0)
 		return 0;
 
diff --git a/drivers/block/drbd/Kconfig b/drivers/block/drbd/Kconfig
index f4acd04..df09837 100644
--- a/drivers/block/drbd/Kconfig
+++ b/drivers/block/drbd/Kconfig
@@ -3,7 +3,7 @@
 #
 
 comment "DRBD disabled because PROC_FS, INET or CONNECTOR not selected"
-	depends on !PROC_FS || !INET || !CONNECTOR
+	depends on PROC_FS='n' || INET='n' || CONNECTOR='n'
 
 config BLK_DEV_DRBD
 	tristate "DRBD Distributed Replicated Block Device support"
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index c975587..2bf3a6e 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -1275,7 +1275,7 @@
 #if DRBD_MAX_SECTORS_BM < DRBD_MAX_SECTORS_32
 #define DRBD_MAX_SECTORS      DRBD_MAX_SECTORS_BM
 #define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_BM
-#elif !defined(CONFIG_LBD) && BITS_PER_LONG == 32
+#elif !defined(CONFIG_LBDAF) && BITS_PER_LONG == 32
 #define DRBD_MAX_SECTORS      DRBD_MAX_SECTORS_32
 #define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_32
 #else
@@ -1371,10 +1371,9 @@
 extern void drbd_suspend_io(struct drbd_conf *mdev);
 extern void drbd_resume_io(struct drbd_conf *mdev);
 extern char *ppsize(char *buf, unsigned long long size);
-extern sector_t drbd_new_dev_size(struct drbd_conf *,
-		struct drbd_backing_dev *);
+extern sector_t drbd_new_dev_size(struct drbd_conf *, struct drbd_backing_dev *, int);
 enum determine_dev_size { dev_size_error = -1, unchanged = 0, shrunk = 1, grew = 2 };
-extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *) __must_hold(local);
+extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *, int force) __must_hold(local);
 extern void resync_after_online_grow(struct drbd_conf *);
 extern void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int) __must_hold(local);
 extern int drbd_set_role(struct drbd_conf *mdev, enum drbd_role new_role,
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 9348f33..ab871e0 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1298,6 +1298,7 @@
 				dev_err(DEV, "Sending state in drbd_io_error() failed\n");
 		}
 
+		wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
 		lc_destroy(mdev->resync);
 		mdev->resync = NULL;
 		lc_destroy(mdev->act_log);
@@ -2972,7 +2973,6 @@
 		goto out_no_q;
 	mdev->rq_queue = q;
 	q->queuedata   = mdev;
-	blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE);
 
 	disk = alloc_disk(1);
 	if (!disk)
@@ -2996,6 +2996,7 @@
 	q->backing_dev_info.congested_data = mdev;
 
 	blk_queue_make_request(q, drbd_make_request_26);
+	blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE);
 	blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);
 	blk_queue_merge_bvec(q, drbd_merge_bvec);
 	q->queue_lock = &mdev->req_lock; /* needed since we use */
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 4e0726a..1292e06 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -510,7 +510,7 @@
  * Returns 0 on success, negative return values indicate errors.
  * You should call drbd_md_sync() after calling this function.
  */
-enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_hold(local)
+enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev, int force) __must_hold(local)
 {
 	sector_t prev_first_sect, prev_size; /* previous meta location */
 	sector_t la_size;
@@ -541,7 +541,7 @@
 	/* TODO: should only be some assert here, not (re)init... */
 	drbd_md_set_sector_offsets(mdev, mdev->ldev);
 
-	size = drbd_new_dev_size(mdev, mdev->ldev);
+	size = drbd_new_dev_size(mdev, mdev->ldev, force);
 
 	if (drbd_get_capacity(mdev->this_bdev) != size ||
 	    drbd_bm_capacity(mdev) != size) {
@@ -596,7 +596,7 @@
 }
 
 sector_t
-drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
+drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev, int assume_peer_has_space)
 {
 	sector_t p_size = mdev->p_size;   /* partner's disk size. */
 	sector_t la_size = bdev->md.la_size_sect; /* last agreed size. */
@@ -606,6 +606,11 @@
 
 	m_size = drbd_get_max_capacity(bdev);
 
+	if (mdev->state.conn < C_CONNECTED && assume_peer_has_space) {
+		dev_warn(DEV, "Resize while not connected was forced by the user!\n");
+		p_size = m_size;
+	}
+
 	if (p_size && m_size) {
 		size = min_t(sector_t, p_size, m_size);
 	} else {
@@ -965,7 +970,7 @@
 
 	/* Prevent shrinking of consistent devices ! */
 	if (drbd_md_test_flag(nbc, MDF_CONSISTENT) &&
-	   drbd_new_dev_size(mdev, nbc) < nbc->md.la_size_sect) {
+	    drbd_new_dev_size(mdev, nbc, 0) < nbc->md.la_size_sect) {
 		dev_warn(DEV, "refusing to truncate a consistent device\n");
 		retcode = ERR_DISK_TO_SMALL;
 		goto force_diskless_dec;
@@ -1052,7 +1057,7 @@
 	    !drbd_md_test_flag(mdev->ldev, MDF_CONNECTED_IND))
 		set_bit(USE_DEGR_WFC_T, &mdev->flags);
 
-	dd = drbd_determin_dev_size(mdev);
+	dd = drbd_determin_dev_size(mdev, 0);
 	if (dd == dev_size_error) {
 		retcode = ERR_NOMEM_BITMAP;
 		goto force_diskless_dec;
@@ -1271,7 +1276,7 @@
 			goto fail;
 		}
 
-		if (crypto_tfm_alg_type(crypto_hash_tfm(tfm)) != CRYPTO_ALG_TYPE_SHASH) {
+		if (!drbd_crypto_is_hash(crypto_hash_tfm(tfm))) {
 			retcode = ERR_AUTH_ALG_ND;
 			goto fail;
 		}
@@ -1504,7 +1509,7 @@
 	}
 
 	mdev->ldev->dc.disk_size = (sector_t)rs.resize_size;
-	dd = drbd_determin_dev_size(mdev);
+	dd = drbd_determin_dev_size(mdev, rs.resize_force);
 	drbd_md_sync(mdev);
 	put_ldev(mdev);
 	if (dd == dev_size_error) {
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 259c135..d065c64 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -878,9 +878,13 @@
 
 	if (mdev->cram_hmac_tfm) {
 		/* drbd_request_state(mdev, NS(conn, WFAuth)); */
-		if (!drbd_do_auth(mdev)) {
+		switch (drbd_do_auth(mdev)) {
+		case -1:
 			dev_err(DEV, "Authentication of peer failed\n");
 			return -1;
+		case 0:
+			dev_err(DEV, "Authentication of peer failed, trying again.\n");
+			return 0;
 		}
 	}
 
@@ -1201,10 +1205,11 @@
 
 	case WO_bdev_flush:
 	case WO_drain_io:
-		D_ASSERT(rv == FE_STILL_LIVE);
-		set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
-		drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
-		rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+		if (rv == FE_STILL_LIVE) {
+			set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
+			drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
+			rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+		}
 		if (rv == FE_RECYCLED)
 			return TRUE;
 
@@ -1219,7 +1224,7 @@
 	epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
 	if (!epoch) {
 		dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
-		issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
+		issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
 		drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
 		if (issue_flush) {
 			rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
@@ -2865,7 +2870,7 @@
 
 		/* Never shrink a device with usable data during connect.
 		   But allow online shrinking if we are connected. */
-		if (drbd_new_dev_size(mdev, mdev->ldev) <
+		if (drbd_new_dev_size(mdev, mdev->ldev, 0) <
 		   drbd_get_capacity(mdev->this_bdev) &&
 		   mdev->state.disk >= D_OUTDATED &&
 		   mdev->state.conn < C_CONNECTED) {
@@ -2880,7 +2885,7 @@
 #undef min_not_zero
 
 	if (get_ldev(mdev)) {
-		dd = drbd_determin_dev_size(mdev);
+	  dd = drbd_determin_dev_size(mdev, 0);
 		put_ldev(mdev);
 		if (dd == dev_size_error)
 			return FALSE;
@@ -3830,10 +3835,17 @@
 {
 	dev_err(DEV, "This kernel was build without CONFIG_CRYPTO_HMAC.\n");
 	dev_err(DEV, "You need to disable 'cram-hmac-alg' in drbd.conf.\n");
-	return 0;
+	return -1;
 }
 #else
 #define CHALLENGE_LEN 64
+
+/* Return value:
+	1 - auth succeeded,
+	0 - failed, try again (network error),
+	-1 - auth failed, don't try again.
+*/
+
 static int drbd_do_auth(struct drbd_conf *mdev)
 {
 	char my_challenge[CHALLENGE_LEN];  /* 64 Bytes... */
@@ -3854,7 +3866,7 @@
 				(u8 *)mdev->net_conf->shared_secret, key_len);
 	if (rv) {
 		dev_err(DEV, "crypto_hash_setkey() failed with %d\n", rv);
-		rv = 0;
+		rv = -1;
 		goto fail;
 	}
 
@@ -3877,14 +3889,14 @@
 
 	if (p.length > CHALLENGE_LEN*2) {
 		dev_err(DEV, "expected AuthChallenge payload too big.\n");
-		rv = 0;
+		rv = -1;
 		goto fail;
 	}
 
 	peers_ch = kmalloc(p.length, GFP_NOIO);
 	if (peers_ch == NULL) {
 		dev_err(DEV, "kmalloc of peers_ch failed\n");
-		rv = 0;
+		rv = -1;
 		goto fail;
 	}
 
@@ -3900,7 +3912,7 @@
 	response = kmalloc(resp_size, GFP_NOIO);
 	if (response == NULL) {
 		dev_err(DEV, "kmalloc of response failed\n");
-		rv = 0;
+		rv = -1;
 		goto fail;
 	}
 
@@ -3910,7 +3922,7 @@
 	rv = crypto_hash_digest(&desc, &sg, sg.length, response);
 	if (rv) {
 		dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
-		rv = 0;
+		rv = -1;
 		goto fail;
 	}
 
@@ -3944,9 +3956,9 @@
 	}
 
 	right_response = kmalloc(resp_size, GFP_NOIO);
-	if (response == NULL) {
+	if (right_response == NULL) {
 		dev_err(DEV, "kmalloc of right_response failed\n");
-		rv = 0;
+		rv = -1;
 		goto fail;
 	}
 
@@ -3955,7 +3967,7 @@
 	rv = crypto_hash_digest(&desc, &sg, sg.length, right_response);
 	if (rv) {
 		dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
-		rv = 0;
+		rv = -1;
 		goto fail;
 	}
 
@@ -3964,6 +3976,8 @@
 	if (rv)
 		dev_info(DEV, "Peer authenticated using %d bytes of '%s' HMAC\n",
 		     resp_size, mdev->net_conf->cram_hmac_alg);
+	else
+		rv = -1;
 
  fail:
 	kfree(peers_ch);
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 2ddf03a..68b5957 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -322,7 +322,7 @@
 	pkt_kobj_remove(pd->kobj_stat);
 	pkt_kobj_remove(pd->kobj_wqueue);
 	if (class_pktcdvd)
-		device_destroy(class_pktcdvd, pd->pkt_dev);
+		device_unregister(pd->dev);
 }
 
 
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 652367a..058fbcc 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -195,5 +195,16 @@
 	  Say Y here to compile support for Marvell BT-over-SDIO driver
 	  into the kernel or say M to compile it as module.
 
-endmenu
+config BT_ATH3K
+	tristate "Atheros firmware download driver"
+	depends on BT_HCIBTUSB
+	select FW_LOADER
+	help
+	  Bluetooth firmware download driver.
+	  This driver loads the firmware into the Atheros Bluetooth
+	  chipset.
 
+	  Say Y here to compile support for "Atheros firmware download driver"
+	  into the kernel or say M to compile it as module (ath3k).
+
+endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index b3f57d2..7e5aed5 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -15,6 +15,7 @@
 obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
 
+obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
new file mode 100644
index 0000000..add9485
--- /dev/null
+++ b/drivers/bluetooth/ath3k.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/usb.h>
+#include <net/bluetooth/bluetooth.h>
+
+#define VERSION "1.0"
+
+
+static struct usb_device_id ath3k_table[] = {
+	/* Atheros AR3011 */
+	{ USB_DEVICE(0x0CF3, 0x3000) },
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ath3k_table);
+
+#define USB_REQ_DFU_DNLOAD	1
+#define BULK_SIZE		4096
+
+struct ath3k_data {
+	struct usb_device *udev;
+	u8 *fw_data;
+	u32 fw_size;
+	u32 fw_sent;
+};
+
+static int ath3k_load_firmware(struct ath3k_data *data,
+				unsigned char *firmware,
+				int count)
+{
+	u8 *send_buf;
+	int err, pipe, len, size, sent = 0;
+
+	BT_DBG("ath3k %p udev %p", data, data->udev);
+
+	pipe = usb_sndctrlpipe(data->udev, 0);
+
+	if ((usb_control_msg(data->udev, pipe,
+				USB_REQ_DFU_DNLOAD,
+				USB_TYPE_VENDOR, 0, 0,
+				firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
+		BT_ERR("Can't change to loading configuration err");
+		return -EBUSY;
+	}
+	sent += 20;
+	count -= 20;
+
+	send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+	if (!send_buf) {
+		BT_ERR("Can't allocate memory chunk for firmware");
+		return -ENOMEM;
+	}
+
+	while (count) {
+		size = min_t(uint, count, BULK_SIZE);
+		pipe = usb_sndbulkpipe(data->udev, 0x02);
+		memcpy(send_buf, firmware + sent, size);
+
+		err = usb_bulk_msg(data->udev, pipe, send_buf, size,
+					&len, 3000);
+
+		if (err || (len != size)) {
+			BT_ERR("Error in firmware loading err = %d,"
+				"len = %d, size = %d", err, len, size);
+			goto error;
+		}
+
+		sent  += size;
+		count -= size;
+	}
+
+	kfree(send_buf);
+	return 0;
+
+error:
+	kfree(send_buf);
+	return err;
+}
+
+static int ath3k_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	const struct firmware *firmware;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct ath3k_data *data;
+	int size;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->udev = udev;
+
+	if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
+		kfree(data);
+		return -EIO;
+	}
+
+	size = max_t(uint, firmware->size, 4096);
+	data->fw_data = kmalloc(size, GFP_KERNEL);
+	if (!data->fw_data) {
+		release_firmware(firmware);
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	memcpy(data->fw_data, firmware->data, firmware->size);
+	data->fw_size = firmware->size;
+	data->fw_sent = 0;
+	release_firmware(firmware);
+
+	usb_set_intfdata(intf, data);
+	if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) {
+		usb_set_intfdata(intf, NULL);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void ath3k_disconnect(struct usb_interface *intf)
+{
+	struct ath3k_data *data = usb_get_intfdata(intf);
+
+	BT_DBG("ath3k_disconnect intf %p", intf);
+
+	kfree(data->fw_data);
+	kfree(data);
+}
+
+static struct usb_driver ath3k_driver = {
+	.name		= "ath3k",
+	.probe		= ath3k_probe,
+	.disconnect	= ath3k_disconnect,
+	.id_table	= ath3k_table,
+};
+
+static int __init ath3k_init(void)
+{
+	BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION);
+	return usb_register(&ath3k_driver);
+}
+
+static void __exit ath3k_exit(void)
+{
+	usb_deregister(&ath3k_driver);
+}
+
+module_init(ath3k_init);
+module_exit(ath3k_exit);
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("ath3k-1.fw");
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 2acdc60..c2cf811 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -503,7 +503,9 @@
 	unsigned int iobase;
 	unsigned char reg;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	if (!test_bit(CARD_READY, &(info->hw_state)))
 		return IRQ_HANDLED;
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index d814a27..9f5926a 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -345,7 +345,9 @@
 	int iir;
 	irqreturn_t r = IRQ_NONE;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	iobase = info->p_dev->io.BasePort1;
 
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index f36defa..57d965b 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -808,6 +808,7 @@
 
 exit:
 	sdio_release_host(card->func);
+	kfree(tmpbuf);
 
 	return ret;
 }
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index d339464..91c5230 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -295,7 +295,9 @@
 	int iir, lsr;
 	irqreturn_t r = IRQ_NONE;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	iobase = info->p_dev->io.BasePort1;
 
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 4f02a6f..6975919 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -299,7 +299,9 @@
 	int iir, lsr;
 	irqreturn_t r = IRQ_NONE;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	iobase = info->p_dev->io.BasePort1;
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 31be3ac..e023682 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -669,7 +669,7 @@
 
 config HVCS
 	tristate "IBM Hypervisor Virtual Console Server support"
-	depends on PPC_PSERIES
+	depends on PPC_PSERIES && HVC_CONSOLE
 	help
 	  Partitionable IBM Power5 ppc64 machines allow hosting of
 	  firmware virtual consoles from one Linux partition by
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 5aa7a58..fd50ead 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -725,14 +725,10 @@
 int __init agp_amd64_init(void)
 {
 	int err = 0;
-	static int done = 0;
 
 	if (agp_off)
 		return -EINVAL;
 
-	if (done++)
-		return agp_bridges_found ? 0 : -ENODEV;
-
 	err = pci_register_driver(&agp_amd64_pci_driver);
 	if (err < 0)
 		return err;
@@ -769,14 +765,27 @@
 	return err;
 }
 
+static int __init agp_amd64_mod_init(void)
+{
+#ifndef MODULE
+	if (gart_iommu_aperture)
+		return agp_bridges_found ? 0 : -ENODEV;
+#endif
+	return agp_amd64_init();
+}
+
 static void __exit agp_amd64_cleanup(void)
 {
+#ifndef MODULE
+	if (gart_iommu_aperture)
+		return;
+#endif
 	if (aperture_resource)
 		release_resource(aperture_resource);
 	pci_unregister_driver(&agp_amd64_pci_driver);
 }
 
-module_init(agp_amd64_init);
+module_init(agp_amd64_mod_init);
 module_exit(agp_amd64_cleanup);
 
 MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen");
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 30c36ac..3999a5f 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -2460,10 +2460,14 @@
 				&bridge->mode);
 	}
 
-	if (bridge->driver->mask_memory == intel_i965_mask_memory)
+	if (bridge->driver->mask_memory == intel_i965_mask_memory) {
 		if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
 			dev_err(&intel_private.pcidev->dev,
 				"set gfx device dma mask 36bit failed!\n");
+		else
+			pci_set_consistent_dma_mask(intel_private.pcidev,
+						    DMA_BIT_MASK(36));
+	}
 
 	pci_set_drvdata(pdev, bridge);
 	return agp_add_bridge(bridge);
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index bdaef8e9..64fe0a7 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -114,7 +114,7 @@
 	{ 0 },
 };
 
-static struct virtio_driver virtio_rng = {
+static struct virtio_driver virtio_rng_driver = {
 	.driver.name =	KBUILD_MODNAME,
 	.driver.owner =	THIS_MODULE,
 	.id_table =	id_table,
@@ -124,12 +124,12 @@
 
 static int __init init(void)
 {
-	return register_virtio_driver(&virtio_rng);
+	return register_virtio_driver(&virtio_rng_driver);
 }
 
 static void __exit fini(void)
 {
-	unregister_virtio_driver(&virtio_rng);
+	unregister_virtio_driver(&virtio_rng_driver);
 }
 module_init(init);
 module_exit(fini);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index be832b6..48788db 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -395,6 +395,7 @@
 	unsigned long p = *ppos;
 	ssize_t low_count, read, sz;
 	char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */
+	int err = 0;
 
 	read = 0;
 	if (p < (unsigned long) high_memory) {
@@ -441,12 +442,16 @@
 			return -ENOMEM;
 		while (count > 0) {
 			sz = size_inside_page(p, count);
+			if (!is_vmalloc_or_module_addr((void *)p)) {
+				err = -ENXIO;
+				break;
+			}
 			sz = vread(kbuf, (char *)p, sz);
 			if (!sz)
 				break;
 			if (copy_to_user(buf, kbuf, sz)) {
-				free_page((unsigned long)kbuf);
-				return -EFAULT;
+				err = -EFAULT;
+				break;
 			}
 			count -= sz;
 			buf += sz;
@@ -455,8 +460,8 @@
 		}
 		free_page((unsigned long)kbuf);
 	}
- 	*ppos = p;
- 	return read;
+	*ppos = p;
+	return read ? read : err;
 }
 
 
@@ -520,6 +525,7 @@
 	ssize_t wrote = 0;
 	ssize_t virtr = 0;
 	char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */
+	int err = 0;
 
 	if (p < (unsigned long) high_memory) {
 		unsigned long to_write = min_t(unsigned long, count,
@@ -540,14 +546,16 @@
 			unsigned long sz = size_inside_page(p, count);
 			unsigned long n;
 
+			if (!is_vmalloc_or_module_addr((void *)p)) {
+				err = -ENXIO;
+				break;
+			}
 			n = copy_from_user(kbuf, buf, sz);
 			if (n) {
-				if (wrote + virtr)
-					break;
-				free_page((unsigned long)kbuf);
-				return -EFAULT;
+				err = -EFAULT;
+				break;
 			}
-			sz = vwrite(kbuf, (char *)p, sz);
+			vwrite(kbuf, (char *)p, sz);
 			count -= sz;
 			buf += sz;
 			virtr += sz;
@@ -556,8 +564,8 @@
 		free_page((unsigned long)kbuf);
 	}
 
- 	*ppos = p;
- 	return virtr + wrote;
+	*ppos = p;
+	return virtr + wrote ? : err;
 }
 #endif
 
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 7d73cd4..2ad7d37 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1651,10 +1651,10 @@
 
 	dc->open_ttys--;
 	port->count--;
-	tty_port_tty_set(port, NULL);
 
 	if (port->count == 0) {
 		DBG1("close: %d", nport->token_dl);
+		tty_port_tty_set(port, NULL);
 		spin_lock_irqsave(&dc->spin_mutex, flags);
 		dc->last_ier &= ~(nport->token_dl);
 		writew(dc->last_ier, dc->reg_ier);
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 8258982..2849713 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1051,12 +1051,6 @@
 				/* like a named pipe */
 	}
 
-	/*
-	 * If we gave the user some bytes, update the access time.
-	 */
-	if (count)
-		file_accessed(file);
-
 	return (count ? count : retval);
 }
 
@@ -1107,7 +1101,6 @@
 			    size_t count, loff_t *ppos)
 {
 	size_t ret;
-	struct inode *inode = file->f_path.dentry->d_inode;
 
 	ret = write_pool(&blocking_pool, buffer, count);
 	if (ret)
@@ -1116,8 +1109,6 @@
 	if (ret)
 		return ret;
 
-	inode->i_mtime = current_fs_time(inode->i_sb);
-	mark_inode_dirty(inode);
 	return (ssize_t)count;
 }
 
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index ecba494..f584407 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -39,12 +39,12 @@
 struct tpm_inf_dev {
 	int iotype;
 
-	void __iomem *mem_base;		/* MMIO ioremap'd addr */
-	unsigned long map_base;		/* phys MMIO base */
-	unsigned long map_size;		/* MMIO region size */
-	unsigned int index_off;		/* index register offset */
+	void __iomem *mem_base;	/* MMIO ioremap'd addr */
+	unsigned long map_base;	/* phys MMIO base */
+	unsigned long map_size;	/* MMIO region size */
+	unsigned int index_off;	/* index register offset */
 
-	unsigned int data_regs;		/* Data registers */
+	unsigned int data_regs;	/* Data registers */
 	unsigned int data_size;
 
 	unsigned int config_port;	/* IO Port config index reg */
@@ -406,14 +406,14 @@
 	.miscdev = {.fops = &inf_ops,},
 };
 
-static const struct pnp_device_id tpm_pnp_tbl[] = {
+static const struct pnp_device_id tpm_inf_pnp_tbl[] = {
 	/* Infineon TPMs */
 	{"IFX0101", 0},
 	{"IFX0102", 0},
 	{"", 0}
 };
 
-MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
+MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl);
 
 static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 				       const struct pnp_device_id *dev_id)
@@ -430,7 +430,7 @@
 	if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
 	    !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
 
-	    	tpm_dev.iotype = TPM_INF_IO_PORT;
+		tpm_dev.iotype = TPM_INF_IO_PORT;
 
 		tpm_dev.config_port = pnp_port_start(dev, 0);
 		tpm_dev.config_size = pnp_port_len(dev, 0);
@@ -459,9 +459,9 @@
 			goto err_last;
 		}
 	} else if (pnp_mem_valid(dev, 0) &&
-	           !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
+		   !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
 
-	    	tpm_dev.iotype = TPM_INF_IO_MEM;
+		tpm_dev.iotype = TPM_INF_IO_MEM;
 
 		tpm_dev.map_base = pnp_mem_start(dev, 0);
 		tpm_dev.map_size = pnp_mem_len(dev, 0);
@@ -563,11 +563,11 @@
 			 "product id 0x%02x%02x"
 			 "%s\n",
 			 tpm_dev.iotype == TPM_INF_IO_PORT ?
-				tpm_dev.config_port :
-				tpm_dev.map_base + tpm_dev.index_off,
+			 tpm_dev.config_port :
+			 tpm_dev.map_base + tpm_dev.index_off,
 			 tpm_dev.iotype == TPM_INF_IO_PORT ?
-				tpm_dev.data_regs :
-				tpm_dev.map_base + tpm_dev.data_regs,
+			 tpm_dev.data_regs :
+			 tpm_dev.map_base + tpm_dev.data_regs,
 			 version[0], version[1],
 			 vendorid[0], vendorid[1],
 			 productid[0], productid[1], chipname);
@@ -607,20 +607,55 @@
 			iounmap(tpm_dev.mem_base);
 			release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
 		}
+		tpm_dev_vendor_release(chip);
 		tpm_remove_hardware(chip->dev);
 	}
 }
 
+static int tpm_inf_pnp_suspend(struct pnp_dev *dev, pm_message_t pm_state)
+{
+	struct tpm_chip *chip = pnp_get_drvdata(dev);
+	int rc;
+	if (chip) {
+		u8 savestate[] = {
+			0, 193,	/* TPM_TAG_RQU_COMMAND */
+			0, 0, 0, 10,	/* blob length (in bytes) */
+			0, 0, 0, 152	/* TPM_ORD_SaveState */
+		};
+		dev_info(&dev->dev, "saving TPM state\n");
+		rc = tpm_inf_send(chip, savestate, sizeof(savestate));
+		if (rc < 0) {
+			dev_err(&dev->dev, "error while saving TPM state\n");
+			return rc;
+		}
+	}
+	return 0;
+}
+
+static int tpm_inf_pnp_resume(struct pnp_dev *dev)
+{
+	/* Re-configure TPM after suspending */
+	tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	tpm_config_out(IOLIMH, TPM_INF_ADDR);
+	tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+	tpm_config_out(IOLIML, TPM_INF_ADDR);
+	tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
+	/* activate register */
+	tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+	tpm_config_out(0x01, TPM_INF_DATA);
+	tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	/* disable RESET, LP and IRQC */
+	tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+	return tpm_pm_resume(&dev->dev);
+}
+
 static struct pnp_driver tpm_inf_pnp_driver = {
 	.name = "tpm_inf_pnp",
-	.driver = {
-		.owner = THIS_MODULE,
-		.suspend = tpm_pm_suspend,
-		.resume = tpm_pm_resume,
-	},
-	.id_table = tpm_pnp_tbl,
+	.id_table = tpm_inf_pnp_tbl,
 	.probe = tpm_inf_pnp_probe,
-	.remove = __devexit_p(tpm_inf_pnp_remove),
+	.suspend = tpm_inf_pnp_suspend,
+	.resume = tpm_inf_pnp_resume,
+	.remove = __devexit_p(tpm_inf_pnp_remove)
 };
 
 static int __init init_inf(void)
@@ -638,5 +673,5 @@
 
 MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>");
 MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
-MODULE_VERSION("1.9");
+MODULE_VERSION("1.9.2");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f15df40..dcb9083 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1951,8 +1951,10 @@
 			pid = task_pid(current);
 			type = PIDTYPE_PID;
 		}
+		get_pid(pid);
 		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 		retval = __f_setown(filp, pid, type, 0);
+		put_pid(pid);
 		if (retval)
 			goto out;
 	} else {
diff --git a/drivers/char/uv_mmtimer.c b/drivers/char/uv_mmtimer.c
index 867b67b..c7072ba 100644
--- a/drivers/char/uv_mmtimer.c
+++ b/drivers/char/uv_mmtimer.c
@@ -89,13 +89,17 @@
 	switch (cmd) {
 	case MMTIMER_GETOFFSET:	/* offset of the counter */
 		/*
-		 * UV RTC register is on its own page
+		 * Starting with HUB rev 2.0, the UV RTC register is
+		 * replicated across all cachelines of it's own page.
+		 * This allows faster simultaneous reads from a given socket.
+		 *
+		 * The offset returned is in 64 bit units.
 		 */
-		if (PAGE_SIZE <= (1 << 16))
-			ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1))
-				/ 8;
+		if (uv_get_min_hub_revision_id() == 1)
+			ret = 0;
 		else
-			ret = -ENOSYS;
+			ret = ((uv_blade_processor_id() * L1_CACHE_BYTES) %
+					PAGE_SIZE) / 8;
 		break;
 
 	case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */
@@ -115,8 +119,8 @@
 		ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK);
 		break;
 
-	case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */
-		ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0;
+	case MMTIMER_MMAPAVAIL:
+		ret = 1;
 		break;
 
 	case MMTIMER_GETCOUNTER:
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index 27d20fa..b314a99 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -21,7 +21,7 @@
 
 #define DRV_NAME "cs5535-clockevt"
 
-static int timer_irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ;
+static int timer_irq;
 module_param_named(irq, timer_irq, int, 0644);
 MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks.");
 
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index f060246..537c29a 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -36,17 +36,6 @@
 MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
 
-static u32 cn_idx = CN_IDX_CONNECTOR;
-static u32 cn_val = CN_VAL_CONNECTOR;
-
-module_param(cn_idx, uint, 0);
-module_param(cn_val, uint, 0);
-MODULE_PARM_DESC(cn_idx, "Connector's main device idx.");
-MODULE_PARM_DESC(cn_val, "Connector's main device val.");
-
-static DEFINE_MUTEX(notify_lock);
-static LIST_HEAD(notify_list);
-
 static struct cn_dev cdev;
 
 static int cn_already_initialized;
@@ -210,54 +199,6 @@
 }
 
 /*
- * Notification routing.
- *
- * Gets id and checks if there are notification request for it's idx
- * and val.  If there are such requests notify the listeners with the
- * given notify event.
- *
- */
-static void cn_notify(struct cb_id *id, u32 notify_event)
-{
-	struct cn_ctl_entry *ent;
-
-	mutex_lock(&notify_lock);
-	list_for_each_entry(ent, &notify_list, notify_entry) {
-		int i;
-		struct cn_notify_req *req;
-		struct cn_ctl_msg *ctl = ent->msg;
-		int idx_found, val_found;
-
-		idx_found = val_found = 0;
-
-		req = (struct cn_notify_req *)ctl->data;
-		for (i = 0; i < ctl->idx_notify_num; ++i, ++req) {
-			if (id->idx >= req->first &&
-					id->idx < req->first + req->range) {
-				idx_found = 1;
-				break;
-			}
-		}
-
-		for (i = 0; i < ctl->val_notify_num; ++i, ++req) {
-			if (id->val >= req->first &&
-					id->val < req->first + req->range) {
-				val_found = 1;
-				break;
-			}
-		}
-
-		if (idx_found && val_found) {
-			struct cn_msg m = { .ack = notify_event, };
-
-			memcpy(&m.id, id, sizeof(m.id));
-			cn_netlink_send(&m, ctl->group, GFP_KERNEL);
-		}
-	}
-	mutex_unlock(&notify_lock);
-}
-
-/*
  * Callback add routing - adds callback with given ID and name.
  * If there is registered callback with the same ID it will not be added.
  *
@@ -276,8 +217,6 @@
 	if (err)
 		return err;
 
-	cn_notify(id, 0);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cn_add_callback);
@@ -295,111 +234,9 @@
 	struct cn_dev *dev = &cdev;
 
 	cn_queue_del_callback(dev->cbdev, id);
-	cn_notify(id, 1);
 }
 EXPORT_SYMBOL_GPL(cn_del_callback);
 
-/*
- * Checks two connector's control messages to be the same.
- * Returns 1 if they are the same or if the first one is corrupted.
- */
-static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2)
-{
-	int i;
-	struct cn_notify_req *req1, *req2;
-
-	if (m1->idx_notify_num != m2->idx_notify_num)
-		return 0;
-
-	if (m1->val_notify_num != m2->val_notify_num)
-		return 0;
-
-	if (m1->len != m2->len)
-		return 0;
-
-	if ((m1->idx_notify_num + m1->val_notify_num) * sizeof(*req1) !=
-	    m1->len)
-		return 1;
-
-	req1 = (struct cn_notify_req *)m1->data;
-	req2 = (struct cn_notify_req *)m2->data;
-
-	for (i = 0; i < m1->idx_notify_num; ++i) {
-		if (req1->first != req2->first || req1->range != req2->range)
-			return 0;
-		req1++;
-		req2++;
-	}
-
-	for (i = 0; i < m1->val_notify_num; ++i) {
-		if (req1->first != req2->first || req1->range != req2->range)
-			return 0;
-		req1++;
-		req2++;
-	}
-
-	return 1;
-}
-
-/*
- * Main connector device's callback.
- *
- * Used for notification of a request's processing.
- */
-static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
-{
-	struct cn_ctl_msg *ctl;
-	struct cn_ctl_entry *ent;
-	u32 size;
-
-	if (msg->len < sizeof(*ctl))
-		return;
-
-	ctl = (struct cn_ctl_msg *)msg->data;
-
-	size = (sizeof(*ctl) + ((ctl->idx_notify_num +
-				 ctl->val_notify_num) *
-				sizeof(struct cn_notify_req)));
-
-	if (msg->len != size)
-		return;
-
-	if (ctl->len + sizeof(*ctl) != msg->len)
-		return;
-
-	/*
-	 * Remove notification.
-	 */
-	if (ctl->group == 0) {
-		struct cn_ctl_entry *n;
-
-		mutex_lock(&notify_lock);
-		list_for_each_entry_safe(ent, n, &notify_list, notify_entry) {
-			if (cn_ctl_msg_equals(ent->msg, ctl)) {
-				list_del(&ent->notify_entry);
-				kfree(ent);
-			}
-		}
-		mutex_unlock(&notify_lock);
-
-		return;
-	}
-
-	size += sizeof(*ent);
-
-	ent = kzalloc(size, GFP_KERNEL);
-	if (!ent)
-		return;
-
-	ent->msg = (struct cn_ctl_msg *)(ent + 1);
-
-	memcpy(ent->msg, ctl, size - sizeof(*ent));
-
-	mutex_lock(&notify_lock);
-	list_add(&ent->notify_entry, &notify_list);
-	mutex_unlock(&notify_lock);
-}
-
 static int cn_proc_show(struct seq_file *m, void *v)
 {
 	struct cn_queue_dev *dev = cdev.cbdev;
@@ -437,11 +274,8 @@
 static int __devinit cn_init(void)
 {
 	struct cn_dev *dev = &cdev;
-	int err;
 
 	dev->input = cn_rx_skb;
-	dev->id.idx = cn_idx;
-	dev->id.val = cn_val;
 
 	dev->nls = netlink_kernel_create(&init_net, NETLINK_CONNECTOR,
 					 CN_NETLINK_USERS + 0xf,
@@ -457,14 +291,6 @@
 
 	cn_already_initialized = 1;
 
-	err = cn_add_callback(&dev->id, "connector", &cn_callback);
-	if (err) {
-		cn_already_initialized = 0;
-		cn_queue_free_dev(dev->cbdev);
-		netlink_kernel_release(dev->nls);
-		return -EINVAL;
-	}
-
 	proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops);
 
 	return 0;
@@ -478,7 +304,6 @@
 
 	proc_net_remove(&init_net, "connector");
 
-	cn_del_callback(&dev->id);
 	cn_queue_free_dev(dev->cbdev);
 	netlink_kernel_release(dev->nls);
 }
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 4b34ade..bd444dc 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -554,6 +554,9 @@
 				(dbs_tuners_ins.up_threshold -
 				 dbs_tuners_ins.down_differential);
 
+		if (freq_next < policy->min)
+			freq_next = policy->min;
+
 		if (!dbs_tuners_ins.powersave_bias) {
 			__cpufreq_driver_target(policy, freq_next,
 					CPUFREQ_RELATION_L);
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 0af8057..d3a27e0 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -57,6 +57,23 @@
 	return crypto_shash_update(&dctx->fallback, data, length);
 }
 
+static int padlock_sha_export(struct shash_desc *desc, void *out)
+{
+	struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+
+	return crypto_shash_export(&dctx->fallback, out);
+}
+
+static int padlock_sha_import(struct shash_desc *desc, const void *in)
+{
+	struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
+	struct padlock_sha_ctx *ctx = crypto_shash_ctx(desc->tfm);
+
+	dctx->fallback.tfm = ctx->fallback;
+	dctx->fallback.flags = desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+	return crypto_shash_import(&dctx->fallback, in);
+}
+
 static inline void padlock_output_block(uint32_t *src,
 		 	uint32_t *dst, size_t count)
 {
@@ -235,7 +252,10 @@
 	.update 	=	padlock_sha_update,
 	.finup  	=	padlock_sha1_finup,
 	.final  	=	padlock_sha1_final,
+	.export		=	padlock_sha_export,
+	.import		=	padlock_sha_import,
 	.descsize	=	sizeof(struct padlock_sha_desc),
+	.statesize	=	sizeof(struct sha1_state),
 	.base		=	{
 		.cra_name		=	"sha1",
 		.cra_driver_name	=	"sha1-padlock",
@@ -256,7 +276,10 @@
 	.update 	=	padlock_sha_update,
 	.finup  	=	padlock_sha256_finup,
 	.final  	=	padlock_sha256_final,
+	.export		=	padlock_sha_export,
+	.import		=	padlock_sha_import,
 	.descsize	=	sizeof(struct padlock_sha_desc),
+	.statesize	=	sizeof(struct sha256_state),
 	.base		=	{
 		.cra_name		=	"sha256",
 		.cra_driver_name	=	"sha256-padlock",
diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index b5f2ee0..64a9372 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -613,8 +613,6 @@
 	cohd_fin->pending_irqs--;
 	cohc->completed = cohd_fin->desc.cookie;
 
-	BUG_ON(cohc->nbr_active_done && cohd_fin == NULL);
-
 	if (cohc->nbr_active_done == 0)
 		return;
 
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 6f51a0a..e7a3230 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -826,6 +826,7 @@
 		chan->dev->chan = NULL;
 		mutex_unlock(&dma_list_mutex);
 		device_unregister(&chan->dev->device);
+		free_percpu(chan->local);
 	}
 }
 EXPORT_SYMBOL(dma_async_device_unregister);
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 8b90516..948d563 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -467,7 +467,7 @@
 
 	if (iterations > 0)
 		while (!kthread_should_stop()) {
-			DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+			DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit);
 			interruptible_sleep_on(&wait_dmatest_exit);
 		}
 
diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c
index 5f7a500e..5cc37af 100644
--- a/drivers/dma/ioat/dma_v2.c
+++ b/drivers/dma/ioat/dma_v2.c
@@ -249,7 +249,7 @@
 	if (is_ioat_active(status) || is_ioat_idle(status))
 		ioat_suspend(chan);
 	while (is_ioat_active(status) || is_ioat_idle(status)) {
-		if (end && time_after(jiffies, end)) {
+		if (tmo && time_after(jiffies, end)) {
 			err = -ETIMEDOUT;
 			break;
 		}
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 9a5bc1a..e80bae1 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -761,12 +761,10 @@
  * @buffer_n:	buffer number to update.
  *		0 or 1 are the only valid values.
  * @phyaddr:	buffer physical address.
- * @return:	Returns 0 on success or negative error code on failure. This
- *              function will fail if the buffer is set to ready.
  */
 /* Called under spin_lock(_irqsave)(&ichan->lock) */
-static int ipu_update_channel_buffer(struct idmac_channel *ichan,
-				     int buffer_n, dma_addr_t phyaddr)
+static void ipu_update_channel_buffer(struct idmac_channel *ichan,
+				      int buffer_n, dma_addr_t phyaddr)
 {
 	enum ipu_channel channel = ichan->dma_chan.chan_id;
 	uint32_t reg;
@@ -806,8 +804,6 @@
 	}
 
 	spin_unlock_irqrestore(&ipu_data.lock, flags);
-
-	return 0;
 }
 
 /* Called under spin_lock_irqsave(&ichan->lock) */
@@ -816,7 +812,6 @@
 {
 	unsigned int chan_id = ichan->dma_chan.chan_id;
 	struct device *dev = &ichan->dma_chan.dev->device;
-	int ret;
 
 	if (async_tx_test_ack(&desc->txd))
 		return -EINTR;
@@ -827,14 +822,7 @@
 	 * could make it conditional on status >= IPU_CHANNEL_ENABLED, but
 	 * doing it again shouldn't hurt either.
 	 */
-	ret = ipu_update_channel_buffer(ichan, buf_idx,
-					sg_dma_address(sg));
-
-	if (ret < 0) {
-		dev_err(dev, "Updating sg %p on channel 0x%x buffer %d failed!\n",
-			sg, chan_id, buf_idx);
-		return ret;
-	}
+	ipu_update_channel_buffer(ichan, buf_idx, sg_dma_address(sg));
 
 	ipu_select_buffer(chan_id, buf_idx);
 	dev_dbg(dev, "Updated sg %p on channel 0x%x buffer %d\n",
@@ -1379,10 +1367,11 @@
 
 	if (likely(sgnew) &&
 	    ipu_submit_buffer(ichan, descnew, sgnew, ichan->active_buffer) < 0) {
-		callback = desc->txd.callback;
-		callback_param = desc->txd.callback_param;
+		callback = descnew->txd.callback;
+		callback_param = descnew->txd.callback_param;
 		spin_unlock(&ichan->lock);
-		callback(callback_param);
+		if (callback)
+			callback(callback_param);
 		spin_lock(&ichan->lock);
 	}
 
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index c5facd9..3391e67 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -197,7 +197,7 @@
 	edac_printk(KERN_DEBUG, EDAC_MC,
 		    "pci-read, sdram scrub control value: %d \n", scrubval);
 
-	for (i = 0; ARRAY_SIZE(scrubrates); i++) {
+	for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
 		if (scrubrates[i].scrubval == scrubval) {
 			*bw = scrubrates[i].bandwidth;
 			status = 0;
@@ -2658,10 +2658,11 @@
  * the memory system completely. A command line option allows to force-enable
  * hardware ECC later in amd64_enable_ecc_error_reporting().
  */
-static const char *ecc_warning =
-	"WARNING: ECC is disabled by BIOS. Module will NOT be loaded.\n"
-	" Either Enable ECC in the BIOS, or set 'ecc_enable_override'.\n"
-	" Also, use of the override can cause unknown side effects.\n";
+static const char *ecc_msg =
+	"ECC disabled in the BIOS or no ECC capability, module will not load.\n"
+	" Either enable ECC checking or force module loading by setting "
+	"'ecc_enable_override'.\n"
+	" (Note that use of the override may cause unknown side effects.)\n";
 
 static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
 {
@@ -2673,7 +2674,7 @@
 
 	ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE);
 	if (!ecc_enabled)
-		amd64_printk(KERN_WARNING, "This node reports that Memory ECC "
+		amd64_printk(KERN_NOTICE, "This node reports that Memory ECC "
 			     "is currently disabled, set F3x%x[22] (%s).\n",
 			     K8_NBCFG, pci_name(pvt->misc_f3_ctl));
 	else
@@ -2681,13 +2682,13 @@
 
 	nb_mce_en = amd64_nb_mce_bank_enabled_on_node(pvt->mc_node_id);
 	if (!nb_mce_en)
-		amd64_printk(KERN_WARNING, "NB MCE bank disabled, set MSR "
+		amd64_printk(KERN_NOTICE, "NB MCE bank disabled, set MSR "
 			     "0x%08x[4] on node %d to enable.\n",
 			     MSR_IA32_MCG_CTL, pvt->mc_node_id);
 
 	if (!ecc_enabled || !nb_mce_en) {
 		if (!ecc_enable_override) {
-			amd64_printk(KERN_WARNING, "%s", ecc_warning);
+			amd64_printk(KERN_NOTICE, "%s", ecc_msg);
 			return -ENODEV;
 		}
 		ecc_enable_override = 0;
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index 77a9579..adc10a2 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -577,7 +577,13 @@
 		debugf0("\tUncorrected bits= 0x%x\n", ue_errors);
 
 		branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
-		channel = branch;
+
+		/*
+		 * According with i5000 datasheet, bit 28 has no significance
+		 * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD
+		 */
+		channel = branch & 2;
+
 		bank = NREC_BANK(info->nrecmema);
 		rank = NREC_RANK(info->nrecmema);
 		rdwr = NREC_RDWR(info->nrecmema);
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index cf27402..ecd5928 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -804,8 +804,8 @@
 		end   <<= (24 - PAGE_SHIFT);
 		end    |= (1 << (24 - PAGE_SHIFT)) - 1;
 
-		csrow->first_page = start >> PAGE_SHIFT;
-		csrow->last_page = end >> PAGE_SHIFT;
+		csrow->first_page = start;
+		csrow->last_page = end;
 		csrow->nr_pages = end + 1 - start;
 		csrow->grain = 8;
 		csrow->mtype = mtype;
@@ -892,10 +892,6 @@
 
 	mpc85xx_init_csrows(mci);
 
-#ifdef CONFIG_EDAC_DEBUG
-	edac_mc_register_mcidev_debug((struct attribute **)debug_attr);
-#endif
-
 	/* store the original error disable bits */
 	orig_ddr_err_disable =
 	    in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE);
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 7083bcc..5045156 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -57,6 +57,8 @@
 static int descriptor_count;
 
 static __be32 tmp_config_rom[256];
+/* ROM header, bus info block, root dir header, capabilities = 7 quadlets */
+static size_t config_rom_length = 1 + 4 + 1 + 1;
 
 #define BIB_CRC(v)		((v) <<  0)
 #define BIB_CRC_LENGTH(v)	((v) << 16)
@@ -73,7 +75,7 @@
 #define BIB_CMC			((1) << 30)
 #define BIB_IMC			((1) << 31)
 
-static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom)
+static void generate_config_rom(struct fw_card *card, __be32 *config_rom)
 {
 	struct fw_descriptor *desc;
 	int i, j, k, length;
@@ -130,23 +132,30 @@
 	for (i = 0; i < j; i += length + 1)
 		length = fw_compute_block_crc(config_rom + i);
 
-	return j;
+	WARN_ON(j != config_rom_length);
 }
 
 static void update_config_roms(void)
 {
 	struct fw_card *card;
-	size_t length;
 
 	list_for_each_entry (card, &card_list, link) {
-		length = generate_config_rom(card, tmp_config_rom);
-		card->driver->set_config_rom(card, tmp_config_rom, length);
+		generate_config_rom(card, tmp_config_rom);
+		card->driver->set_config_rom(card, tmp_config_rom,
+					     config_rom_length);
 	}
 }
 
+static size_t required_space(struct fw_descriptor *desc)
+{
+	/* descriptor + entry into root dir + optional immediate entry */
+	return desc->length + 1 + (desc->immediate > 0 ? 1 : 0);
+}
+
 int fw_core_add_descriptor(struct fw_descriptor *desc)
 {
 	size_t i;
+	int ret;
 
 	/*
 	 * Check descriptor is valid; the length of all blocks in the
@@ -162,15 +171,21 @@
 
 	mutex_lock(&card_mutex);
 
-	list_add_tail(&desc->link, &descriptor_list);
-	descriptor_count++;
-	if (desc->immediate > 0)
+	if (config_rom_length + required_space(desc) > 256) {
+		ret = -EBUSY;
+	} else {
+		list_add_tail(&desc->link, &descriptor_list);
+		config_rom_length += required_space(desc);
 		descriptor_count++;
-	update_config_roms();
+		if (desc->immediate > 0)
+			descriptor_count++;
+		update_config_roms();
+		ret = 0;
+	}
 
 	mutex_unlock(&card_mutex);
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(fw_core_add_descriptor);
 
@@ -179,6 +194,7 @@
 	mutex_lock(&card_mutex);
 
 	list_del(&desc->link);
+	config_rom_length -= required_space(desc);
 	descriptor_count--;
 	if (desc->immediate > 0)
 		descriptor_count--;
@@ -428,7 +444,6 @@
 int fw_card_add(struct fw_card *card,
 		u32 max_receive, u32 link_speed, u64 guid)
 {
-	size_t length;
 	int ret;
 
 	card->max_receive = max_receive;
@@ -437,8 +452,8 @@
 
 	mutex_lock(&card_mutex);
 
-	length = generate_config_rom(card, tmp_config_rom);
-	ret = card->driver->enable(card, tmp_config_rom, length);
+	generate_config_rom(card, tmp_config_rom);
+	ret = card->driver->enable(card, tmp_config_rom, config_rom_length);
 	if (ret == 0)
 		list_add_tail(&card->link, &card_list);
 
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index e6d63849..4eeaed5 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -35,6 +35,7 @@
 #include <linux/preempt.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
+#include <linux/string.h>
 #include <linux/time.h>
 #include <linux/uaccess.h>
 #include <linux/vmalloc.h>
@@ -595,13 +596,20 @@
 			    client->device->max_speed);
 }
 
+static inline bool is_fcp_request(struct fw_request *request)
+{
+	return request == NULL;
+}
+
 static void release_request(struct client *client,
 			    struct client_resource *resource)
 {
 	struct inbound_transaction_resource *r = container_of(resource,
 			struct inbound_transaction_resource, resource);
 
-	if (r->request)
+	if (is_fcp_request(r->request))
+		kfree(r->data);
+	else
 		fw_send_response(client->device->card, r->request,
 				 RCODE_CONFLICT_ERROR);
 	kfree(r);
@@ -616,6 +624,7 @@
 	struct address_handler_resource *handler = callback_data;
 	struct inbound_transaction_resource *r;
 	struct inbound_transaction_event *e;
+	void *fcp_frame = NULL;
 	int ret;
 
 	r = kmalloc(sizeof(*r), GFP_ATOMIC);
@@ -627,6 +636,18 @@
 	r->data    = payload;
 	r->length  = length;
 
+	if (is_fcp_request(request)) {
+		/*
+		 * FIXME: Let core-transaction.c manage a
+		 * single reference-counted copy?
+		 */
+		fcp_frame = kmemdup(payload, length, GFP_ATOMIC);
+		if (fcp_frame == NULL)
+			goto failed;
+
+		r->data = fcp_frame;
+	}
+
 	r->resource.release = release_request;
 	ret = add_client_resource(handler->client, &r->resource, GFP_ATOMIC);
 	if (ret < 0)
@@ -640,13 +661,15 @@
 	e->request.closure = handler->closure;
 
 	queue_event(handler->client, &e->event,
-		    &e->request, sizeof(e->request), payload, length);
+		    &e->request, sizeof(e->request), r->data, length);
 	return;
 
  failed:
 	kfree(r);
 	kfree(e);
-	if (request)
+	kfree(fcp_frame);
+
+	if (!is_fcp_request(request))
 		fw_send_response(card, request, RCODE_CONFLICT_ERROR);
 }
 
@@ -717,18 +740,17 @@
 
 	r = container_of(resource, struct inbound_transaction_resource,
 			 resource);
-	if (r->request) {
-		if (request->length < r->length)
-			r->length = request->length;
-		if (copy_from_user(r->data, u64_to_uptr(request->data),
-				   r->length)) {
-			ret = -EFAULT;
-			kfree(r->request);
-			goto out;
-		}
-		fw_send_response(client->device->card, r->request,
-				 request->rcode);
+	if (is_fcp_request(r->request))
+		goto out;
+
+	if (request->length < r->length)
+		r->length = request->length;
+	if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) {
+		ret = -EFAULT;
+		kfree(r->request);
+		goto out;
 	}
+	fw_send_response(client->device->card, r->request, request->rcode);
  out:
 	kfree(r);
 
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index cbaf420..2d3dc7d 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -893,20 +893,31 @@
 
 static struct kmem_cache *fwnet_packet_task_cache;
 
+static void fwnet_free_ptask(struct fwnet_packet_task *ptask)
+{
+	dev_kfree_skb_any(ptask->skb);
+	kmem_cache_free(fwnet_packet_task_cache, ptask);
+}
+
 static int fwnet_send_packet(struct fwnet_packet_task *ptask);
 
 static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 {
-	struct fwnet_device *dev;
+	struct fwnet_device *dev = ptask->dev;
 	unsigned long flags;
-
-	dev = ptask->dev;
+	bool free;
 
 	spin_lock_irqsave(&dev->lock, flags);
-	list_del(&ptask->pt_link);
-	spin_unlock_irqrestore(&dev->lock, flags);
 
-	ptask->outstanding_pkts--; /* FIXME access inside lock */
+	ptask->outstanding_pkts--;
+
+	/* Check whether we or the networking TX soft-IRQ is last user. */
+	free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+
+	if (ptask->outstanding_pkts == 0)
+		list_del(&ptask->pt_link);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
 
 	if (ptask->outstanding_pkts > 0) {
 		u16 dg_size;
@@ -951,10 +962,10 @@
 			ptask->max_payload = skb->len + RFC2374_FRAG_HDR_SIZE;
 		}
 		fwnet_send_packet(ptask);
-	} else {
-		dev_kfree_skb_any(ptask->skb);
-		kmem_cache_free(fwnet_packet_task_cache, ptask);
 	}
+
+	if (free)
+		fwnet_free_ptask(ptask);
 }
 
 static void fwnet_write_complete(struct fw_card *card, int rcode,
@@ -977,6 +988,7 @@
 	unsigned tx_len;
 	struct rfc2734_header *bufhdr;
 	unsigned long flags;
+	bool free;
 
 	dev = ptask->dev;
 	tx_len = ptask->max_payload;
@@ -1022,12 +1034,16 @@
 				generation, SCODE_100, 0ULL, ptask->skb->data,
 				tx_len + 8, fwnet_write_complete, ptask);
 
-		/* FIXME race? */
 		spin_lock_irqsave(&dev->lock, flags);
-		list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
+		/* If the AT tasklet already ran, we may be last user. */
+		free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+		if (!free)
+			list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
 		spin_unlock_irqrestore(&dev->lock, flags);
 
-		return 0;
+		goto out;
 	}
 
 	fw_send_request(dev->card, &ptask->transaction,
@@ -1035,12 +1051,19 @@
 			ptask->generation, ptask->speed, ptask->fifo_addr,
 			ptask->skb->data, tx_len, fwnet_write_complete, ptask);
 
-	/* FIXME race? */
 	spin_lock_irqsave(&dev->lock, flags);
-	list_add_tail(&ptask->pt_link, &dev->sent_list);
+
+	/* If the AT tasklet already ran, we may be last user. */
+	free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+	if (!free)
+		list_add_tail(&ptask->pt_link, &dev->sent_list);
+
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	dev->netdev->trans_start = jiffies;
+ out:
+	if (free)
+		fwnet_free_ptask(ptask);
 
 	return 0;
 }
@@ -1298,6 +1321,8 @@
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	ptask->max_payload = max_payload;
+	INIT_LIST_HEAD(&ptask->pt_link);
+
 	fwnet_send_packet(ptask);
 
 	return NETDEV_TX_OK;
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index a61571c..43ebf33 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -2101,11 +2101,6 @@
 	u32 payload_index, payload_end_index, next_page_index;
 	int page, end_page, i, length, offset;
 
-	/*
-	 * FIXME: Cycle lost behavior should be configurable: lose
-	 * packet, retransmit or terminate..
-	 */
-
 	p = packet;
 	payload_index = payload;
 
@@ -2135,6 +2130,14 @@
 	if (!p->skip) {
 		d[0].control   = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
 		d[0].req_count = cpu_to_le16(8);
+		/*
+		 * Link the skip address to this descriptor itself.  This causes
+		 * a context to skip a cycle whenever lost cycles or FIFO
+		 * overruns occur, without dropping the data.  The application
+		 * should then decide whether this is an error condition or not.
+		 * FIXME:  Make the context's cycle-lost behaviour configurable?
+		 */
+		d[0].branch_address = cpu_to_le32(d_bus | z);
 
 		header = (__le32 *) &d[1];
 		header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) |
@@ -2420,6 +2423,7 @@
 
 #define PCI_VENDOR_ID_AGERE		PCI_VENDOR_ID_ATT
 #define PCI_DEVICE_ID_AGERE_FW643	0x5901
+#define PCI_DEVICE_ID_TI_TSB43AB23	0x8024
 
 static int __devinit pci_probe(struct pci_dev *dev,
 			       const struct pci_device_id *ent)
@@ -2488,7 +2492,8 @@
 #if !defined(CONFIG_X86_32)
 	/* dual-buffer mode is broken with descriptor addresses above 2G */
 	if (dev->vendor == PCI_VENDOR_ID_TI &&
-	    dev->device == PCI_DEVICE_ID_TI_TSB43AB22)
+	    (dev->device == PCI_DEVICE_ID_TI_TSB43AB22 ||
+	     dev->device == PCI_DEVICE_ID_TI_TSB43AB23))
 		ohci->use_dualbuffer = false;
 #endif
 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 96eddd1..305c590 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -66,6 +66,8 @@
 
 	  If M is selected, the module will be called radeon.
 
+source "drivers/gpu/drm/radeon/Kconfig"
+
 config DRM_I810
 	tristate "Intel I810"
 	depends on DRM && AGP && AGP_INTEL
diff --git a/drivers/gpu/drm/ati_pcigart.c b/drivers/gpu/drm/ati_pcigart.c
index a1fce68..17be051 100644
--- a/drivers/gpu/drm/ati_pcigart.c
+++ b/drivers/gpu/drm/ati_pcigart.c
@@ -113,7 +113,7 @@
 
 		if (pci_set_dma_mask(dev->pdev, gart_info->table_mask)) {
 			DRM_ERROR("fail to set dma mask to 0x%Lx\n",
-				  gart_info->table_mask);
+				  (unsigned long long)gart_info->table_mask);
 			ret = 1;
 			goto done;
 		}
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 077313f..7d0f00a 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -702,7 +702,7 @@
 		if (encoder->crtc != crtc)
 			continue;
 
-		DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
+		DRM_DEBUG("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
 			 mode->name, mode->base.id);
 		encoder_funcs = encoder->helper_private;
 		encoder_funcs->mode_set(encoder, mode, adjusted_mode);
@@ -1032,7 +1032,8 @@
 	/*
 	 * we shouldn't end up with no modes here.
 	 */
-	printk(KERN_INFO "No connectors reported conncted with modes\n");
+	if (count == 0)
+		printk(KERN_INFO "No connectors reported connected with modes\n");
 
 	drm_setup_crtcs(dev);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index defcaf1..ab6c973 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -598,6 +598,50 @@
 	return mode;
 }
 
+/*
+ * EDID is delightfully ambiguous about how interlaced modes are to be
+ * encoded.  Our internal representation is of frame height, but some
+ * HDTV detailed timings are encoded as field height.
+ *
+ * The format list here is from CEA, in frame size.  Technically we
+ * should be checking refresh rate too.  Whatever.
+ */
+static void
+drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
+			    struct detailed_pixel_timing *pt)
+{
+	int i;
+	static const struct {
+		int w, h;
+	} cea_interlaced[] = {
+		{ 1920, 1080 },
+		{  720,  480 },
+		{ 1440,  480 },
+		{ 2880,  480 },
+		{  720,  576 },
+		{ 1440,  576 },
+		{ 2880,  576 },
+	};
+	static const int n_sizes =
+		sizeof(cea_interlaced)/sizeof(cea_interlaced[0]);
+
+	if (!(pt->misc & DRM_EDID_PT_INTERLACED))
+		return;
+
+	for (i = 0; i < n_sizes; i++) {
+		if ((mode->hdisplay == cea_interlaced[i].w) &&
+		    (mode->vdisplay == cea_interlaced[i].h / 2)) {
+			mode->vdisplay *= 2;
+			mode->vsync_start *= 2;
+			mode->vsync_end *= 2;
+			mode->vtotal *= 2;
+			mode->vtotal |= 1;
+		}
+	}
+
+	mode->flags |= DRM_MODE_FLAG_INTERLACE;
+}
+
 /**
  * drm_mode_detailed - create a new mode from an EDID detailed timing section
  * @dev: DRM device (needed to create new mode)
@@ -633,8 +677,7 @@
 		return NULL;
 	}
 	if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
-		printk(KERN_WARNING "integrated sync not supported\n");
-		return NULL;
+		printk(KERN_WARNING "composite sync not supported\n");
 	}
 
 	/* it is incorrect if hsync/vsync width is zero */
@@ -681,8 +724,7 @@
 
 	drm_mode_set_name(mode);
 
-	if (pt->misc & DRM_EDID_PT_INTERLACED)
-		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+	drm_mode_do_interlace_quirk(mode, pt);
 
 	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
 		pt->misc |= DRM_EDID_PT_HSYNC_POSITIVE | DRM_EDID_PT_VSYNC_POSITIVE;
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 1c2b7d4..0f9e9055 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -389,7 +389,7 @@
 		break;
 	/* Display: Off; HSync: On, VSync: On */
 	case FB_BLANK_NORMAL:
-		drm_fb_helper_off(info, DRM_MODE_DPMS_ON);
+		drm_fb_helper_off(info, DRM_MODE_DPMS_STANDBY);
 		break;
 	/* Display: Off; HSync: Off, VSync: On */
 	case FB_BLANK_HSYNC_SUSPEND:
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index e9dbb48..8bf3770 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -142,19 +142,6 @@
 	if (IS_ERR(obj->filp))
 		goto free;
 
-	/* Basically we want to disable the OOM killer and handle ENOMEM
-	 * ourselves by sacrificing pages from cached buffers.
-	 * XXX shmem_file_[gs]et_gfp_mask()
-	 */
-	mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping,
-			     GFP_HIGHUSER |
-			     __GFP_COLD |
-			     __GFP_FS |
-			     __GFP_RECLAIMABLE |
-			     __GFP_NORETRY |
-			     __GFP_NOWARN |
-			     __GFP_NOMEMALLOC);
-
 	kref_init(&obj->refcount);
 	kref_init(&obj->handlecount);
 	obj->size = size;
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index cdec329..2ac074c8 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -405,7 +405,8 @@
 				wasted += alignment - tmp;
 		}
 
-		if (entry->size >= size + wasted) {
+		if (entry->size >= size + wasted &&
+		    (entry->start + wasted + size) <= end) {
 			if (!best_match)
 				return entry;
 			if (entry->size < best_size) {
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9c9998c..a894ade 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -290,7 +290,7 @@
 	list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
 		obj = obj_priv->obj;
 		if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
-		    ret = i915_gem_object_get_pages(obj);
+		    ret = i915_gem_object_get_pages(obj, 0);
 		    if (ret) {
 			    DRM_ERROR("Failed to get pages: %d\n", ret);
 			    spin_unlock(&dev_priv->mm.active_list_lock);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index bbe4781..2307f98 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -134,6 +134,10 @@
 
 	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
 
+	if (IS_I965G(dev))
+		dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) &
+					     0xf0;
+
 	I915_WRITE(HWS_PGA, dev_priv->dma_status_page);
 	DRM_DEBUG_DRIVER("Enabled hardware status page\n");
 	return 0;
@@ -731,8 +735,10 @@
 	if (cmdbuf->num_cliprects) {
 		cliprects = kcalloc(cmdbuf->num_cliprects,
 				    sizeof(struct drm_clip_rect), GFP_KERNEL);
-		if (cliprects == NULL)
+		if (cliprects == NULL) {
+			ret = -ENOMEM;
 			goto fail_batch_free;
+		}
 
 		ret = copy_from_user(cliprects, cmdbuf->cliprects,
 				     cmdbuf->num_cliprects *
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index be631cc..cf4cb3e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -45,6 +45,9 @@
 unsigned int i915_powersave = 1;
 module_param_named(powersave, i915_powersave, int, 0400);
 
+unsigned int i915_lvds_downclock = 0;
+module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+
 static struct drm_driver driver;
 
 #define INTEL_VGA_DEVICE(id, info) {		\
@@ -117,7 +120,7 @@
 
 const static struct intel_device_info intel_pineview_info = {
 	.is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
-	.has_pipe_cxsr = 1,
+	.need_gfx_hws = 1,
 	.has_hotplug = 1,
 };
 
@@ -171,26 +174,20 @@
 MODULE_DEVICE_TABLE(pci, pciidlist);
 #endif
 
-static int i915_suspend(struct drm_device *dev, pm_message_t state)
+static int i915_drm_freeze(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (!dev || !dev_priv) {
-		DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
-		DRM_ERROR("DRM not initialized, aborting suspend.\n");
-		return -ENODEV;
-	}
-
-	if (state.event == PM_EVENT_PRETHAW)
-		return 0;
-
 	pci_save_state(dev->pdev);
 
 	/* If KMS is active, we do the leavevt stuff here */
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		if (i915_gem_idle(dev))
+		int error = i915_gem_idle(dev);
+		if (error) {
 			dev_err(&dev->pdev->dev,
-				"GEM idle failed, resume may fail\n");
+				"GEM idle failed, resume might fail\n");
+			return error;
+		}
 		drm_irq_uninstall(dev);
 	}
 
@@ -198,26 +195,42 @@
 
 	intel_opregion_free(dev, 1);
 
-	if (state.event == PM_EVENT_SUSPEND) {
-		/* Shut down the device */
-		pci_disable_device(dev->pdev);
-		pci_set_power_state(dev->pdev, PCI_D3hot);
-	}
-
 	/* Modeset on resume, not lid events */
 	dev_priv->modeset_on_lid = 0;
 
 	return 0;
 }
 
-static int i915_resume(struct drm_device *dev)
+static int i915_suspend(struct drm_device *dev, pm_message_t state)
+{
+	int error;
+
+	if (!dev || !dev->dev_private) {
+		DRM_ERROR("dev: %p\n", dev);
+		DRM_ERROR("DRM not initialized, aborting suspend.\n");
+		return -ENODEV;
+	}
+
+	if (state.event == PM_EVENT_PRETHAW)
+		return 0;
+
+	error = i915_drm_freeze(dev);
+	if (error)
+		return error;
+
+	if (state.event == PM_EVENT_SUSPEND) {
+		/* Shut down the device */
+		pci_disable_device(dev->pdev);
+		pci_set_power_state(dev->pdev, PCI_D3hot);
+	}
+
+	return 0;
+}
+
+static int i915_drm_thaw(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int ret = 0;
-
-	if (pci_enable_device(dev->pdev))
-		return -1;
-	pci_set_master(dev->pdev);
+	int error = 0;
 
 	i915_restore_state(dev);
 
@@ -228,21 +241,28 @@
 		mutex_lock(&dev->struct_mutex);
 		dev_priv->mm.suspended = 0;
 
-		ret = i915_gem_init_ringbuffer(dev);
-		if (ret != 0)
-			ret = -1;
+		error = i915_gem_init_ringbuffer(dev);
 		mutex_unlock(&dev->struct_mutex);
 
 		drm_irq_install(dev);
-	}
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+
 		/* Resume the modeset for every activated CRTC */
 		drm_helper_resume_force_mode(dev);
 	}
 
 	dev_priv->modeset_on_lid = 0;
 
-	return ret;
+	return error;
+}
+
+static int i915_resume(struct drm_device *dev)
+{
+	if (pci_enable_device(dev->pdev))
+		return -EIO;
+
+	pci_set_master(dev->pdev);
+
+	return i915_drm_thaw(dev);
 }
 
 /**
@@ -383,57 +403,62 @@
 	drm_put_dev(dev);
 }
 
-static int
-i915_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int i915_pm_suspend(struct device *dev)
 {
-	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+	int error;
 
-	return i915_suspend(dev, state);
-}
+	if (!drm_dev || !drm_dev->dev_private) {
+		dev_err(dev, "DRM not initialized, aborting suspend.\n");
+		return -ENODEV;
+	}
 
-static int
-i915_pci_resume(struct pci_dev *pdev)
-{
-	struct drm_device *dev = pci_get_drvdata(pdev);
+	error = i915_drm_freeze(drm_dev);
+	if (error)
+		return error;
 
-	return i915_resume(dev);
-}
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
 
-static int
-i915_pm_suspend(struct device *dev)
-{
-	return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND);
-}
-
-static int
-i915_pm_resume(struct device *dev)
-{
-	return i915_pci_resume(to_pci_dev(dev));
-}
-
-static int
-i915_pm_freeze(struct device *dev)
-{
-	return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE);
-}
-
-static int
-i915_pm_thaw(struct device *dev)
-{
-	/* thaw during hibernate, do nothing! */
 	return 0;
 }
 
-static int
-i915_pm_poweroff(struct device *dev)
+static int i915_pm_resume(struct device *dev)
 {
-	return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_resume(drm_dev);
 }
 
-static int
-i915_pm_restore(struct device *dev)
+static int i915_pm_freeze(struct device *dev)
 {
-	return i915_pci_resume(to_pci_dev(dev));
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	if (!drm_dev || !drm_dev->dev_private) {
+		dev_err(dev, "DRM not initialized, aborting suspend.\n");
+		return -ENODEV;
+	}
+
+	return i915_drm_freeze(drm_dev);
+}
+
+static int i915_pm_thaw(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_drm_thaw(drm_dev);
+}
+
+static int i915_pm_poweroff(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct drm_device *drm_dev = pci_get_drvdata(pdev);
+
+	return i915_drm_freeze(drm_dev);
 }
 
 const struct dev_pm_ops i915_pm_ops = {
@@ -442,7 +467,7 @@
      .freeze = i915_pm_freeze,
      .thaw = i915_pm_thaw,
      .poweroff = i915_pm_poweroff,
-     .restore = i915_pm_restore,
+     .restore = i915_pm_resume,
 };
 
 static struct vm_operations_struct i915_gem_vm_ops = {
@@ -464,8 +489,11 @@
 	.lastclose = i915_driver_lastclose,
 	.preclose = i915_driver_preclose,
 	.postclose = i915_driver_postclose,
+
+	/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
 	.suspend = i915_suspend,
 	.resume = i915_resume,
+
 	.device_is_agp = i915_driver_device_is_agp,
 	.enable_vblank = i915_enable_vblank,
 	.disable_vblank = i915_disable_vblank,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 29dd676..b99b6a8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -283,6 +283,7 @@
 	unsigned int lvds_use_ssc:1;
 	unsigned int edp_support:1;
 	int lvds_ssc_freq;
+	int edp_bpp;
 
 	struct notifier_block lid_notifier;
 
@@ -492,6 +493,15 @@
 		struct list_head flushing_list;
 
 		/**
+		 * List of objects currently pending a GPU write flush.
+		 *
+		 * All elements on this list will belong to either the
+		 * active_list or flushing_list, last_rendering_seqno can
+		 * be used to differentiate between the two elements.
+		 */
+		struct list_head gpu_write_list;
+
+		/**
 		 * LRU list of objects which are not in the ringbuffer and
 		 * are ready to unbind, but are still in the GTT.
 		 *
@@ -591,6 +601,8 @@
 
 	/** This object's place on the active/flushing/inactive lists */
 	struct list_head list;
+	/** This object's place on GPU write list */
+	struct list_head gpu_write_list;
 
 	/** This object's place on the fenced object LRU */
 	struct list_head fence_list;
@@ -722,6 +734,7 @@
 extern int i915_max_ioctl;
 extern unsigned int i915_fbpercrtc;
 extern unsigned int i915_powersave;
+extern unsigned int i915_lvds_downclock;
 
 extern void i915_save_display(struct drm_device *dev);
 extern void i915_restore_display(struct drm_device *dev);
@@ -864,12 +877,13 @@
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
 int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
 				      int write);
+int i915_gem_object_set_to_display_plane(struct drm_gem_object *obj);
 int i915_gem_attach_phys_object(struct drm_device *dev,
 				struct drm_gem_object *obj, int id);
 void i915_gem_detach_phys_object(struct drm_device *dev,
 				 struct drm_gem_object *obj);
 void i915_gem_free_all_phys_object(struct drm_device *dev);
-int i915_gem_object_get_pages(struct drm_gem_object *obj);
+int i915_gem_object_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
 void i915_gem_object_put_pages(struct drm_gem_object *obj);
 void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
 void i915_gem_object_flush_write_domain(struct drm_gem_object *obj);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 2748609..ec8a0d7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -277,7 +277,7 @@
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_object_get_pages(obj);
+	ret = i915_gem_object_get_pages(obj, 0);
 	if (ret != 0)
 		goto fail_unlock;
 
@@ -321,40 +321,24 @@
 	return ret;
 }
 
-static inline gfp_t
-i915_gem_object_get_page_gfp_mask (struct drm_gem_object *obj)
-{
-	return mapping_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping);
-}
-
-static inline void
-i915_gem_object_set_page_gfp_mask (struct drm_gem_object *obj, gfp_t gfp)
-{
-	mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, gfp);
-}
-
 static int
 i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj)
 {
 	int ret;
 
-	ret = i915_gem_object_get_pages(obj);
+	ret = i915_gem_object_get_pages(obj, __GFP_NORETRY | __GFP_NOWARN);
 
 	/* If we've insufficient memory to map in the pages, attempt
 	 * to make some space by throwing out some old buffers.
 	 */
 	if (ret == -ENOMEM) {
 		struct drm_device *dev = obj->dev;
-		gfp_t gfp;
 
 		ret = i915_gem_evict_something(dev, obj->size);
 		if (ret)
 			return ret;
 
-		gfp = i915_gem_object_get_page_gfp_mask(obj);
-		i915_gem_object_set_page_gfp_mask(obj, gfp & ~__GFP_NORETRY);
-		ret = i915_gem_object_get_pages(obj);
-		i915_gem_object_set_page_gfp_mask (obj, gfp);
+		ret = i915_gem_object_get_pages(obj, 0);
 	}
 
 	return ret;
@@ -790,7 +774,7 @@
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_object_get_pages(obj);
+	ret = i915_gem_object_get_pages(obj, 0);
 	if (ret != 0)
 		goto fail_unlock;
 
@@ -1568,6 +1552,8 @@
 	else
 		list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
 
+	BUG_ON(!list_empty(&obj_priv->gpu_write_list));
+
 	obj_priv->last_rendering_seqno = 0;
 	if (obj_priv->active) {
 		obj_priv->active = 0;
@@ -1638,7 +1624,8 @@
 		struct drm_i915_gem_object *obj_priv, *next;
 
 		list_for_each_entry_safe(obj_priv, next,
-					 &dev_priv->mm.flushing_list, list) {
+					 &dev_priv->mm.gpu_write_list,
+					 gpu_write_list) {
 			struct drm_gem_object *obj = obj_priv->obj;
 
 			if ((obj->write_domain & flush_domains) ==
@@ -1646,6 +1633,7 @@
 				uint32_t old_write_domain = obj->write_domain;
 
 				obj->write_domain = 0;
+				list_del_init(&obj_priv->gpu_write_list);
 				i915_gem_object_move_to_active(obj, seqno);
 
 				trace_i915_gem_object_change_domain(obj,
@@ -2100,8 +2088,8 @@
 i915_gem_evict_everything(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	uint32_t seqno;
 	int ret;
+	uint32_t seqno;
 	bool lists_empty;
 
 	spin_lock(&dev_priv->mm.active_list_lock);
@@ -2123,6 +2111,8 @@
 	if (ret)
 		return ret;
 
+	BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+
 	ret = i915_gem_evict_from_inactive_list(dev);
 	if (ret)
 		return ret;
@@ -2230,7 +2220,8 @@
 }
 
 int
-i915_gem_object_get_pages(struct drm_gem_object *obj)
+i915_gem_object_get_pages(struct drm_gem_object *obj,
+			  gfp_t gfpmask)
 {
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	int page_count, i;
@@ -2256,7 +2247,10 @@
 	inode = obj->filp->f_path.dentry->d_inode;
 	mapping = inode->i_mapping;
 	for (i = 0; i < page_count; i++) {
-		page = read_mapping_page(mapping, i, NULL);
+		page = read_cache_page_gfp(mapping, i,
+					   mapping_gfp_mask (mapping) |
+					   __GFP_COLD |
+					   gfpmask);
 		if (IS_ERR(page)) {
 			ret = PTR_ERR(page);
 			i915_gem_object_put_pages(obj);
@@ -2579,7 +2573,7 @@
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	struct drm_mm_node *free_space;
-	bool retry_alloc = false;
+	gfp_t gfpmask =  __GFP_NORETRY | __GFP_NOWARN;
 	int ret;
 
 	if (obj_priv->madv != I915_MADV_WILLNEED) {
@@ -2623,15 +2617,7 @@
 	DRM_INFO("Binding object of size %zd at 0x%08x\n",
 		 obj->size, obj_priv->gtt_offset);
 #endif
-	if (retry_alloc) {
-		i915_gem_object_set_page_gfp_mask (obj,
-						   i915_gem_object_get_page_gfp_mask (obj) & ~__GFP_NORETRY);
-	}
-	ret = i915_gem_object_get_pages(obj);
-	if (retry_alloc) {
-		i915_gem_object_set_page_gfp_mask (obj,
-						   i915_gem_object_get_page_gfp_mask (obj) | __GFP_NORETRY);
-	}
+	ret = i915_gem_object_get_pages(obj, gfpmask);
 	if (ret) {
 		drm_mm_put_block(obj_priv->gtt_space);
 		obj_priv->gtt_space = NULL;
@@ -2641,9 +2627,9 @@
 			ret = i915_gem_evict_something(dev, obj->size);
 			if (ret) {
 				/* now try to shrink everyone else */
-				if (! retry_alloc) {
-				    retry_alloc = true;
-				    goto search_free;
+				if (gfpmask) {
+					gfpmask = 0;
+					goto search_free;
 				}
 
 				return ret;
@@ -2721,7 +2707,7 @@
 	old_write_domain = obj->write_domain;
 	i915_gem_flush(dev, 0, obj->write_domain);
 	seqno = i915_add_request(dev, NULL, obj->write_domain);
-	obj->write_domain = 0;
+	BUG_ON(obj->write_domain);
 	i915_gem_object_move_to_active(obj, seqno);
 
 	trace_i915_gem_object_change_domain(obj,
@@ -2837,6 +2823,57 @@
 	return 0;
 }
 
+/*
+ * Prepare buffer for display plane. Use uninterruptible for possible flush
+ * wait, as in modesetting process we're not supposed to be interrupted.
+ */
+int
+i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	uint32_t old_write_domain, old_read_domains;
+	int ret;
+
+	/* Not valid to be called on unbound objects. */
+	if (obj_priv->gtt_space == NULL)
+		return -EINVAL;
+
+	i915_gem_object_flush_gpu_write_domain(obj);
+
+	/* Wait on any GPU rendering and flushing to occur. */
+	if (obj_priv->active) {
+#if WATCH_BUF
+		DRM_INFO("%s: object %p wait for seqno %08x\n",
+			  __func__, obj, obj_priv->last_rendering_seqno);
+#endif
+		ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0);
+		if (ret != 0)
+			return ret;
+	}
+
+	old_write_domain = obj->write_domain;
+	old_read_domains = obj->read_domains;
+
+	obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+	i915_gem_object_flush_cpu_write_domain(obj);
+
+	/* It should now be out of any other write domains, and we can update
+	 * the domain values for our changes.
+	 */
+	BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+	obj->read_domains |= I915_GEM_DOMAIN_GTT;
+	obj->write_domain = I915_GEM_DOMAIN_GTT;
+	obj_priv->dirty = 1;
+
+	trace_i915_gem_object_change_domain(obj,
+					    old_read_domains,
+					    old_write_domain);
+
+	return 0;
+}
+
 /**
  * Moves a single object to the CPU read, and possibly write domain.
  *
@@ -3533,6 +3570,9 @@
 	uint32_t reloc_count = 0, i;
 	int ret = 0;
 
+	if (relocs == NULL)
+	    return 0;
+
 	for (i = 0; i < buffer_count; i++) {
 		struct drm_i915_gem_relocation_entry __user *user_relocs;
 		int unwritten;
@@ -3622,7 +3662,7 @@
 	struct drm_gem_object *batch_obj;
 	struct drm_i915_gem_object *obj_priv;
 	struct drm_clip_rect *cliprects = NULL;
-	struct drm_i915_gem_relocation_entry *relocs;
+	struct drm_i915_gem_relocation_entry *relocs = NULL;
 	int ret = 0, ret2, i, pinned = 0;
 	uint64_t exec_offset;
 	uint32_t seqno, flush_domains, reloc_index;
@@ -3648,8 +3688,10 @@
 	if (args->num_cliprects != 0) {
 		cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects),
 				    GFP_KERNEL);
-		if (cliprects == NULL)
+		if (cliprects == NULL) {
+			ret = -ENOMEM;
 			goto pre_mutex_err;
+		}
 
 		ret = copy_from_user(cliprects,
 				     (struct drm_clip_rect __user *)
@@ -3691,6 +3733,8 @@
 		if (object_list[i] == NULL) {
 			DRM_ERROR("Invalid object handle %d at index %d\n",
 				   exec_list[i].handle, i);
+			/* prevent error path from reading uninitialized data */
+			args->buffer_count = i + 1;
 			ret = -EBADF;
 			goto err;
 		}
@@ -3699,6 +3743,8 @@
 		if (obj_priv->in_execbuffer) {
 			DRM_ERROR("Object %p appears more than once in object list\n",
 				   object_list[i]);
+			/* prevent error path from reading uninitialized data */
+			args->buffer_count = i + 1;
 			ret = -EBADF;
 			goto err;
 		}
@@ -3812,16 +3858,23 @@
 		i915_gem_flush(dev,
 			       dev->invalidate_domains,
 			       dev->flush_domains);
-		if (dev->flush_domains)
+		if (dev->flush_domains & I915_GEM_GPU_DOMAINS)
 			(void)i915_add_request(dev, file_priv,
 					       dev->flush_domains);
 	}
 
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
+		struct drm_i915_gem_object *obj_priv = obj->driver_private;
 		uint32_t old_write_domain = obj->write_domain;
 
 		obj->write_domain = obj->pending_write_domain;
+		if (obj->write_domain)
+			list_move_tail(&obj_priv->gpu_write_list,
+				       &dev_priv->mm.gpu_write_list);
+		else
+			list_del_init(&obj_priv->gpu_write_list);
+
 		trace_i915_gem_object_change_domain(obj,
 						    obj->read_domains,
 						    old_write_domain);
@@ -3895,6 +3948,7 @@
 
 	mutex_unlock(&dev->struct_mutex);
 
+pre_mutex_err:
 	/* Copy the updated relocations out regardless of current error
 	 * state.  Failure to update the relocs would mean that the next
 	 * time userland calls execbuf, it would do so with presumed offset
@@ -3909,7 +3963,6 @@
 			ret = ret2;
 	}
 
-pre_mutex_err:
 	drm_free_large(object_list);
 	kfree(cliprects);
 
@@ -4000,8 +4053,6 @@
 				  "back to user (%d)\n",
 				  args->buffer_count, ret);
 		}
-	} else {
-		DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret);
 	}
 
 	drm_free_large(exec_list);
@@ -4334,6 +4385,7 @@
 	obj_priv->obj = obj;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
 	INIT_LIST_HEAD(&obj_priv->list);
+	INIT_LIST_HEAD(&obj_priv->gpu_write_list);
 	INIT_LIST_HEAD(&obj_priv->fence_list);
 	obj_priv->madv = I915_MADV_WILLNEED;
 
@@ -4785,6 +4837,7 @@
 	spin_lock_init(&dev_priv->mm.active_list_lock);
 	INIT_LIST_HEAD(&dev_priv->mm.active_list);
 	INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
+	INIT_LIST_HEAD(&dev_priv->mm.gpu_write_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
 	INIT_LIST_HEAD(&dev_priv->mm.request_list);
 	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
@@ -4897,7 +4950,7 @@
 	if (!obj_priv->phys_obj)
 		return;
 
-	ret = i915_gem_object_get_pages(obj);
+	ret = i915_gem_object_get_pages(obj, 0);
 	if (ret)
 		goto out;
 
@@ -4955,7 +5008,7 @@
 	obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1];
 	obj_priv->phys_obj->cur_obj = obj;
 
-	ret = i915_gem_object_get_pages(obj);
+	ret = i915_gem_object_get_pages(obj, 0);
 	if (ret) {
 		DRM_ERROR("failed to get page list\n");
 		goto out;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 7cd8110..a17d6bdf 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -274,7 +274,6 @@
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int ret = IRQ_NONE;
 	u32 de_iir, gt_iir, de_ier, pch_iir;
-	u32 new_de_iir, new_gt_iir, new_pch_iir;
 	struct drm_i915_master_private *master_priv;
 
 	/* disable master interrupt before clearing iir  */
@@ -286,51 +285,58 @@
 	gt_iir = I915_READ(GTIIR);
 	pch_iir = I915_READ(SDEIIR);
 
-	for (;;) {
-		if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
-			break;
+	if (de_iir == 0 && gt_iir == 0 && pch_iir == 0)
+		goto done;
 
-		ret = IRQ_HANDLED;
+	ret = IRQ_HANDLED;
 
-		/* should clear PCH hotplug event before clear CPU irq */
-		I915_WRITE(SDEIIR, pch_iir);
-		new_pch_iir = I915_READ(SDEIIR);
-
-		I915_WRITE(DEIIR, de_iir);
-		new_de_iir = I915_READ(DEIIR);
-		I915_WRITE(GTIIR, gt_iir);
-		new_gt_iir = I915_READ(GTIIR);
-
-		if (dev->primary->master) {
-			master_priv = dev->primary->master->driver_priv;
-			if (master_priv->sarea_priv)
-				master_priv->sarea_priv->last_dispatch =
-					READ_BREADCRUMB(dev_priv);
-		}
-
-		if (gt_iir & GT_USER_INTERRUPT) {
-			u32 seqno = i915_get_gem_seqno(dev);
-			dev_priv->mm.irq_gem_seqno = seqno;
-			trace_i915_gem_request_complete(dev, seqno);
-			DRM_WAKEUP(&dev_priv->irq_queue);
-			dev_priv->hangcheck_count = 0;
-			mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
-		}
-
-		if (de_iir & DE_GSE)
-			ironlake_opregion_gse_intr(dev);
-
-		/* check event from PCH */
-		if ((de_iir & DE_PCH_EVENT) &&
-			(pch_iir & SDE_HOTPLUG_MASK)) {
-			queue_work(dev_priv->wq, &dev_priv->hotplug_work);
-		}
-
-		de_iir = new_de_iir;
-		gt_iir = new_gt_iir;
-		pch_iir = new_pch_iir;
+	if (dev->primary->master) {
+		master_priv = dev->primary->master->driver_priv;
+		if (master_priv->sarea_priv)
+			master_priv->sarea_priv->last_dispatch =
+				READ_BREADCRUMB(dev_priv);
 	}
 
+	if (gt_iir & GT_USER_INTERRUPT) {
+		u32 seqno = i915_get_gem_seqno(dev);
+		dev_priv->mm.irq_gem_seqno = seqno;
+		trace_i915_gem_request_complete(dev, seqno);
+		DRM_WAKEUP(&dev_priv->irq_queue);
+		dev_priv->hangcheck_count = 0;
+		mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+	}
+
+	if (de_iir & DE_GSE)
+		ironlake_opregion_gse_intr(dev);
+
+	if (de_iir & DE_PLANEA_FLIP_DONE) {
+		intel_prepare_page_flip(dev, 0);
+		intel_finish_page_flip(dev, 0);
+	}
+
+	if (de_iir & DE_PLANEB_FLIP_DONE) {
+		intel_prepare_page_flip(dev, 1);
+		intel_finish_page_flip(dev, 1);
+	}
+
+	if (de_iir & DE_PIPEA_VBLANK)
+		drm_handle_vblank(dev, 0);
+
+	if (de_iir & DE_PIPEB_VBLANK)
+		drm_handle_vblank(dev, 1);
+
+	/* check event from PCH */
+	if ((de_iir & DE_PCH_EVENT) &&
+	    (pch_iir & SDE_HOTPLUG_MASK)) {
+		queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+	}
+
+	/* should clear PCH hotplug event before clear CPU irq */
+	I915_WRITE(SDEIIR, pch_iir);
+	I915_WRITE(GTIIR, gt_iir);
+	I915_WRITE(DEIIR, de_iir);
+
+done:
 	I915_WRITE(DEIER, de_ier);
 	(void)I915_READ(DEIER);
 
@@ -854,11 +860,11 @@
 	if (!(pipeconf & PIPEACONF_ENABLE))
 		return -EINVAL;
 
-	if (IS_IRONLAKE(dev))
-		return 0;
-
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	if (IS_I965G(dev))
+	if (IS_IRONLAKE(dev))
+		ironlake_enable_display_irq(dev_priv, (pipe == 0) ? 
+					    DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
+	else if (IS_I965G(dev))
 		i915_enable_pipestat(dev_priv, pipe,
 				     PIPE_START_VBLANK_INTERRUPT_ENABLE);
 	else
@@ -876,13 +882,14 @@
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
 
-	if (IS_IRONLAKE(dev))
-		return;
-
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
-	i915_disable_pipestat(dev_priv, pipe,
-			      PIPE_VBLANK_INTERRUPT_ENABLE |
-			      PIPE_START_VBLANK_INTERRUPT_ENABLE);
+	if (IS_IRONLAKE(dev))
+		ironlake_disable_display_irq(dev_priv, (pipe == 0) ? 
+					     DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
+	else
+		i915_disable_pipestat(dev_priv, pipe,
+				      PIPE_VBLANK_INTERRUPT_ENABLE |
+				      PIPE_START_VBLANK_INTERRUPT_ENABLE);
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
@@ -1025,13 +1032,14 @@
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	/* enable kind of interrupts always enabled */
-	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT;
+	u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
+			   DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
 	u32 render_mask = GT_USER_INTERRUPT;
 	u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
 			   SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
 
 	dev_priv->irq_mask_reg = ~display_mask;
-	dev_priv->de_irq_enable_reg = display_mask;
+	dev_priv->de_irq_enable_reg = display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK;
 
 	/* should always can generate irq */
 	I915_WRITE(DEIIR, I915_READ(DEIIR));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 149d360..ab1bd2d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -338,6 +338,7 @@
 #define   FBC_CTL_PERIODIC	(1<<30)
 #define   FBC_CTL_INTERVAL_SHIFT (16)
 #define   FBC_CTL_UNCOMPRESSIBLE (1<<14)
+#define   FBC_C3_IDLE		(1<<13)
 #define   FBC_CTL_STRIDE_SHIFT	(5)
 #define   FBC_CTL_FENCENO	(1<<0)
 #define FBC_COMMAND		0x0320c
@@ -1815,7 +1816,7 @@
 #define   DSPFW_PLANEB_SHIFT	8
 #define DSPFW2			0x70038
 #define   DSPFW_CURSORA_MASK	0x00003f00
-#define   DSPFW_CURSORA_SHIFT	16
+#define   DSPFW_CURSORA_SHIFT	8
 #define DSPFW3			0x7003c
 #define   DSPFW_HPLL_SR_EN	(1<<31)
 #define   DSPFW_CURSOR_SR_SHIFT	24
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index f275677..15fbc1b 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -33,6 +33,8 @@
 #define	SLAVE_ADDR1	0x70
 #define	SLAVE_ADDR2	0x72
 
+static int panel_type;
+
 static void *
 find_section(struct bdb_header *bdb, int section_id)
 {
@@ -128,6 +130,7 @@
 	dev_priv->lvds_dither = lvds_options->pixel_dither;
 	if (lvds_options->panel_type == 0xff)
 		return;
+	panel_type = lvds_options->panel_type;
 
 	lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
 	if (!lvds_lfp_data)
@@ -197,7 +200,8 @@
 		memset(temp_mode, 0, sizeof(*temp_mode));
 	}
 	kfree(temp_mode);
-	if (temp_downclock < panel_fixed_mode->clock) {
+	if (temp_downclock < panel_fixed_mode->clock &&
+	    i915_lvds_downclock) {
 		dev_priv->lvds_downclock_avail = 1;
 		dev_priv->lvds_downclock = temp_downclock;
 		DRM_DEBUG_KMS("LVDS downclock is found in VBT. ",
@@ -405,6 +409,34 @@
 }
 
 static void
+parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+{
+	struct bdb_edp *edp;
+
+	edp = find_section(bdb, BDB_EDP);
+	if (!edp) {
+		if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) {
+			DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\
+				       assume 18bpp panel color depth.\n");
+			dev_priv->edp_bpp = 18;
+		}
+		return;
+	}
+
+	switch ((edp->color_depth >> (panel_type * 2)) & 3) {
+	case EDP_18BPP:
+		dev_priv->edp_bpp = 18;
+		break;
+	case EDP_24BPP:
+		dev_priv->edp_bpp = 24;
+		break;
+	case EDP_30BPP:
+		dev_priv->edp_bpp = 30;
+		break;
+	}
+}
+
+static void
 parse_device_mapping(struct drm_i915_private *dev_priv,
 		       struct bdb_header *bdb)
 {
@@ -521,6 +553,7 @@
 	parse_sdvo_device_mapping(dev_priv, bdb);
 	parse_device_mapping(dev_priv, bdb);
 	parse_driver_features(dev_priv, bdb);
+	parse_edp(dev_priv, bdb);
 
 	pci_unmap_rom(pdev, bios);
 
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 425ac9d..4c18514 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -98,6 +98,7 @@
 #define BDB_SDVO_LVDS_PNP_IDS	 24
 #define BDB_SDVO_LVDS_POWER_SEQ	 25
 #define BDB_TV_OPTIONS		 26
+#define BDB_EDP			 27
 #define BDB_LVDS_OPTIONS	 40
 #define BDB_LVDS_LFP_DATA_PTRS	 41
 #define BDB_LVDS_LFP_DATA	 42
@@ -426,6 +427,45 @@
 	u8 custom_vbt_version;
 } __attribute__((packed));
 
+#define EDP_18BPP	0
+#define EDP_24BPP	1
+#define EDP_30BPP	2
+#define EDP_RATE_1_62	0
+#define EDP_RATE_2_7	1
+#define EDP_LANE_1	0
+#define EDP_LANE_2	1
+#define EDP_LANE_4	3
+#define EDP_PREEMPHASIS_NONE	0
+#define EDP_PREEMPHASIS_3_5dB	1
+#define EDP_PREEMPHASIS_6dB	2
+#define EDP_PREEMPHASIS_9_5dB	3
+#define EDP_VSWING_0_4V		0
+#define EDP_VSWING_0_6V		1
+#define EDP_VSWING_0_8V		2
+#define EDP_VSWING_1_2V		3
+
+struct edp_power_seq {
+	u16 t3;
+	u16 t7;
+	u16 t9;
+	u16 t10;
+	u16 t12;
+} __attribute__ ((packed));
+
+struct edp_link_params {
+	u8 rate:4;
+	u8 lanes:4;
+	u8 preemphasis:4;
+	u8 vswing:4;
+} __attribute__ ((packed));
+
+struct bdb_edp {
+	struct edp_power_seq power_seqs[16];
+	u32 color_depth;
+	u32 sdrrs_msa_timing_delay;
+	struct edp_link_params link_params[16];
+} __attribute__ ((packed));
+
 bool intel_init_bios(struct drm_device *dev);
 
 /*
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index ddefc87..79dd402 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -157,6 +157,9 @@
 	adpa = I915_READ(PCH_ADPA);
 
 	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+	/* disable HPD first */
+	I915_WRITE(PCH_ADPA, adpa);
+	(void)I915_READ(PCH_ADPA);
 
 	adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
 			ADPA_CRT_HOTPLUG_WARMUP_10MS |
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 002612f..b27202d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -70,8 +70,6 @@
     intel_p2_t	    p2;
     bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
 		      int, int, intel_clock_t *);
-    bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *,
-			      int, int, intel_clock_t *);
 };
 
 #define I8XX_DOT_MIN		  25000
@@ -242,41 +240,91 @@
 #define IRONLAKE_DOT_MAX         350000
 #define IRONLAKE_VCO_MIN         1760000
 #define IRONLAKE_VCO_MAX         3510000
-#define IRONLAKE_N_MIN           1
-#define IRONLAKE_N_MAX           5
-#define IRONLAKE_M_MIN           79
-#define IRONLAKE_M_MAX           118
 #define IRONLAKE_M1_MIN          12
-#define IRONLAKE_M1_MAX          23
+#define IRONLAKE_M1_MAX          22
 #define IRONLAKE_M2_MIN          5
 #define IRONLAKE_M2_MAX          9
-#define IRONLAKE_P_SDVO_DAC_MIN  5
-#define IRONLAKE_P_SDVO_DAC_MAX  80
-#define IRONLAKE_P_LVDS_MIN      28
-#define IRONLAKE_P_LVDS_MAX      112
-#define IRONLAKE_P1_MIN          1
-#define IRONLAKE_P1_MAX          8
-#define IRONLAKE_P2_SDVO_DAC_SLOW 10
-#define IRONLAKE_P2_SDVO_DAC_FAST 5
-#define IRONLAKE_P2_LVDS_SLOW    14 /* single channel */
-#define IRONLAKE_P2_LVDS_FAST    7  /* double channel */
 #define IRONLAKE_P2_DOT_LIMIT    225000 /* 225Mhz */
 
-#define IRONLAKE_P_DISPLAY_PORT_MIN	10
-#define IRONLAKE_P_DISPLAY_PORT_MAX	20
-#define IRONLAKE_P2_DISPLAY_PORT_FAST	10
-#define IRONLAKE_P2_DISPLAY_PORT_SLOW	10
-#define IRONLAKE_P2_DISPLAY_PORT_LIMIT	0
-#define IRONLAKE_P1_DISPLAY_PORT_MIN	1
-#define IRONLAKE_P1_DISPLAY_PORT_MAX	2
+/* We have parameter ranges for different type of outputs. */
+
+/* DAC & HDMI Refclk 120Mhz */
+#define IRONLAKE_DAC_N_MIN	1
+#define IRONLAKE_DAC_N_MAX	5
+#define IRONLAKE_DAC_M_MIN	79
+#define IRONLAKE_DAC_M_MAX	127
+#define IRONLAKE_DAC_P_MIN	5
+#define IRONLAKE_DAC_P_MAX	80
+#define IRONLAKE_DAC_P1_MIN	1
+#define IRONLAKE_DAC_P1_MAX	8
+#define IRONLAKE_DAC_P2_SLOW	10
+#define IRONLAKE_DAC_P2_FAST	5
+
+/* LVDS single-channel 120Mhz refclk */
+#define IRONLAKE_LVDS_S_N_MIN	1
+#define IRONLAKE_LVDS_S_N_MAX	3
+#define IRONLAKE_LVDS_S_M_MIN	79
+#define IRONLAKE_LVDS_S_M_MAX	118
+#define IRONLAKE_LVDS_S_P_MIN	28
+#define IRONLAKE_LVDS_S_P_MAX	112
+#define IRONLAKE_LVDS_S_P1_MIN	2
+#define IRONLAKE_LVDS_S_P1_MAX	8
+#define IRONLAKE_LVDS_S_P2_SLOW	14
+#define IRONLAKE_LVDS_S_P2_FAST	14
+
+/* LVDS dual-channel 120Mhz refclk */
+#define IRONLAKE_LVDS_D_N_MIN	1
+#define IRONLAKE_LVDS_D_N_MAX	3
+#define IRONLAKE_LVDS_D_M_MIN	79
+#define IRONLAKE_LVDS_D_M_MAX	127
+#define IRONLAKE_LVDS_D_P_MIN	14
+#define IRONLAKE_LVDS_D_P_MAX	56
+#define IRONLAKE_LVDS_D_P1_MIN	2
+#define IRONLAKE_LVDS_D_P1_MAX	8
+#define IRONLAKE_LVDS_D_P2_SLOW	7
+#define IRONLAKE_LVDS_D_P2_FAST	7
+
+/* LVDS single-channel 100Mhz refclk */
+#define IRONLAKE_LVDS_S_SSC_N_MIN	1
+#define IRONLAKE_LVDS_S_SSC_N_MAX	2
+#define IRONLAKE_LVDS_S_SSC_M_MIN	79
+#define IRONLAKE_LVDS_S_SSC_M_MAX	126
+#define IRONLAKE_LVDS_S_SSC_P_MIN	28
+#define IRONLAKE_LVDS_S_SSC_P_MAX	112
+#define IRONLAKE_LVDS_S_SSC_P1_MIN	2
+#define IRONLAKE_LVDS_S_SSC_P1_MAX	8
+#define IRONLAKE_LVDS_S_SSC_P2_SLOW	14
+#define IRONLAKE_LVDS_S_SSC_P2_FAST	14
+
+/* LVDS dual-channel 100Mhz refclk */
+#define IRONLAKE_LVDS_D_SSC_N_MIN	1
+#define IRONLAKE_LVDS_D_SSC_N_MAX	3
+#define IRONLAKE_LVDS_D_SSC_M_MIN	79
+#define IRONLAKE_LVDS_D_SSC_M_MAX	126
+#define IRONLAKE_LVDS_D_SSC_P_MIN	14
+#define IRONLAKE_LVDS_D_SSC_P_MAX	42
+#define IRONLAKE_LVDS_D_SSC_P1_MIN	2
+#define IRONLAKE_LVDS_D_SSC_P1_MAX	6
+#define IRONLAKE_LVDS_D_SSC_P2_SLOW	7
+#define IRONLAKE_LVDS_D_SSC_P2_FAST	7
+
+/* DisplayPort */
+#define IRONLAKE_DP_N_MIN		1
+#define IRONLAKE_DP_N_MAX		2
+#define IRONLAKE_DP_M_MIN		81
+#define IRONLAKE_DP_M_MAX		90
+#define IRONLAKE_DP_P_MIN		10
+#define IRONLAKE_DP_P_MAX		20
+#define IRONLAKE_DP_P2_FAST		10
+#define IRONLAKE_DP_P2_SLOW		10
+#define IRONLAKE_DP_P2_LIMIT		0
+#define IRONLAKE_DP_P1_MIN		1
+#define IRONLAKE_DP_P1_MAX		2
 
 static bool
 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 		    int target, int refclk, intel_clock_t *best_clock);
 static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
-			    int target, int refclk, intel_clock_t *best_clock);
-static bool
 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
 
@@ -299,7 +347,6 @@
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_SLOW,	.p2_fast = I8XX_P2_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
 static const intel_limit_t intel_limits_i8xx_lvds = {
@@ -314,7 +361,6 @@
 	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
 		 .p2_slow = I8XX_P2_LVDS_SLOW,	.p2_fast = I8XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 	
 static const intel_limit_t intel_limits_i9xx_sdvo = {
@@ -329,7 +375,6 @@
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
 static const intel_limit_t intel_limits_i9xx_lvds = {
@@ -347,7 +392,6 @@
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
     /* below parameter and function is for G4X Chipset Family*/
@@ -365,7 +409,6 @@
 		 .p2_fast = G4X_P2_SDVO_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_hdmi = {
@@ -382,7 +425,6 @@
 		 .p2_fast = G4X_P2_HDMI_DAC_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
@@ -407,7 +449,6 @@
 		 .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
@@ -432,7 +473,6 @@
 		 .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST
 	},
 	.find_pll = intel_g4x_find_best_PLL,
-	.find_reduced_pll = intel_g4x_find_best_PLL,
 };
 
 static const intel_limit_t intel_limits_g4x_display_port = {
@@ -470,7 +510,6 @@
 	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
 static const intel_limit_t intel_limits_pineview_lvds = {
@@ -486,36 +525,80 @@
 	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
 		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_SLOW },
 	.find_pll = intel_find_best_PLL,
-	.find_reduced_pll = intel_find_best_reduced_PLL,
 };
 
-static const intel_limit_t intel_limits_ironlake_sdvo = {
+static const intel_limit_t intel_limits_ironlake_dac = {
 	.dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
 	.vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
-	.n   = { .min = IRONLAKE_N_MIN,            .max = IRONLAKE_N_MAX },
-	.m   = { .min = IRONLAKE_M_MIN,            .max = IRONLAKE_M_MAX },
+	.n   = { .min = IRONLAKE_DAC_N_MIN,        .max = IRONLAKE_DAC_N_MAX },
+	.m   = { .min = IRONLAKE_DAC_M_MIN,        .max = IRONLAKE_DAC_M_MAX },
 	.m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
 	.m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
-	.p   = { .min = IRONLAKE_P_SDVO_DAC_MIN,   .max = IRONLAKE_P_SDVO_DAC_MAX },
-	.p1  = { .min = IRONLAKE_P1_MIN,           .max = IRONLAKE_P1_MAX },
+	.p   = { .min = IRONLAKE_DAC_P_MIN,	   .max = IRONLAKE_DAC_P_MAX },
+	.p1  = { .min = IRONLAKE_DAC_P1_MIN,       .max = IRONLAKE_DAC_P1_MAX },
 	.p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
-		 .p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW,
-		 .p2_fast = IRONLAKE_P2_SDVO_DAC_FAST },
+		 .p2_slow = IRONLAKE_DAC_P2_SLOW,
+		 .p2_fast = IRONLAKE_DAC_P2_FAST },
 	.find_pll = intel_g4x_find_best_PLL,
 };
 
-static const intel_limit_t intel_limits_ironlake_lvds = {
+static const intel_limit_t intel_limits_ironlake_single_lvds = {
 	.dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
 	.vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
-	.n   = { .min = IRONLAKE_N_MIN,            .max = IRONLAKE_N_MAX },
-	.m   = { .min = IRONLAKE_M_MIN,            .max = IRONLAKE_M_MAX },
+	.n   = { .min = IRONLAKE_LVDS_S_N_MIN,     .max = IRONLAKE_LVDS_S_N_MAX },
+	.m   = { .min = IRONLAKE_LVDS_S_M_MIN,     .max = IRONLAKE_LVDS_S_M_MAX },
 	.m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
 	.m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
-	.p   = { .min = IRONLAKE_P_LVDS_MIN,       .max = IRONLAKE_P_LVDS_MAX },
-	.p1  = { .min = IRONLAKE_P1_MIN,           .max = IRONLAKE_P1_MAX },
+	.p   = { .min = IRONLAKE_LVDS_S_P_MIN,     .max = IRONLAKE_LVDS_S_P_MAX },
+	.p1  = { .min = IRONLAKE_LVDS_S_P1_MIN,    .max = IRONLAKE_LVDS_S_P1_MAX },
 	.p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
-		 .p2_slow = IRONLAKE_P2_LVDS_SLOW,
-		 .p2_fast = IRONLAKE_P2_LVDS_FAST },
+		 .p2_slow = IRONLAKE_LVDS_S_P2_SLOW,
+		 .p2_fast = IRONLAKE_LVDS_S_P2_FAST },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds = {
+	.dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
+	.vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
+	.n   = { .min = IRONLAKE_LVDS_D_N_MIN,     .max = IRONLAKE_LVDS_D_N_MAX },
+	.m   = { .min = IRONLAKE_LVDS_D_M_MIN,     .max = IRONLAKE_LVDS_D_M_MAX },
+	.m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
+	.m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
+	.p   = { .min = IRONLAKE_LVDS_D_P_MIN,     .max = IRONLAKE_LVDS_D_P_MAX },
+	.p1  = { .min = IRONLAKE_LVDS_D_P1_MIN,    .max = IRONLAKE_LVDS_D_P1_MAX },
+	.p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
+		 .p2_slow = IRONLAKE_LVDS_D_P2_SLOW,
+		 .p2_fast = IRONLAKE_LVDS_D_P2_FAST },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
+	.dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
+	.vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
+	.n   = { .min = IRONLAKE_LVDS_S_SSC_N_MIN, .max = IRONLAKE_LVDS_S_SSC_N_MAX },
+	.m   = { .min = IRONLAKE_LVDS_S_SSC_M_MIN, .max = IRONLAKE_LVDS_S_SSC_M_MAX },
+	.m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
+	.m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
+	.p   = { .min = IRONLAKE_LVDS_S_SSC_P_MIN, .max = IRONLAKE_LVDS_S_SSC_P_MAX },
+	.p1  = { .min = IRONLAKE_LVDS_S_SSC_P1_MIN,.max = IRONLAKE_LVDS_S_SSC_P1_MAX },
+	.p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
+		 .p2_slow = IRONLAKE_LVDS_S_SSC_P2_SLOW,
+		 .p2_fast = IRONLAKE_LVDS_S_SSC_P2_FAST },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
+	.dot = { .min = IRONLAKE_DOT_MIN,          .max = IRONLAKE_DOT_MAX },
+	.vco = { .min = IRONLAKE_VCO_MIN,          .max = IRONLAKE_VCO_MAX },
+	.n   = { .min = IRONLAKE_LVDS_D_SSC_N_MIN, .max = IRONLAKE_LVDS_D_SSC_N_MAX },
+	.m   = { .min = IRONLAKE_LVDS_D_SSC_M_MIN, .max = IRONLAKE_LVDS_D_SSC_M_MAX },
+	.m1  = { .min = IRONLAKE_M1_MIN,           .max = IRONLAKE_M1_MAX },
+	.m2  = { .min = IRONLAKE_M2_MIN,           .max = IRONLAKE_M2_MAX },
+	.p   = { .min = IRONLAKE_LVDS_D_SSC_P_MIN, .max = IRONLAKE_LVDS_D_SSC_P_MAX },
+	.p1  = { .min = IRONLAKE_LVDS_D_SSC_P1_MIN,.max = IRONLAKE_LVDS_D_SSC_P1_MAX },
+	.p2  = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
+		 .p2_slow = IRONLAKE_LVDS_D_SSC_P2_SLOW,
+		 .p2_fast = IRONLAKE_LVDS_D_SSC_P2_FAST },
 	.find_pll = intel_g4x_find_best_PLL,
 };
 
@@ -524,34 +607,53 @@
                  .max = IRONLAKE_DOT_MAX },
         .vco = { .min = IRONLAKE_VCO_MIN,
                  .max = IRONLAKE_VCO_MAX},
-        .n   = { .min = IRONLAKE_N_MIN,
-                 .max = IRONLAKE_N_MAX },
-        .m   = { .min = IRONLAKE_M_MIN,
-                 .max = IRONLAKE_M_MAX },
+        .n   = { .min = IRONLAKE_DP_N_MIN,
+                 .max = IRONLAKE_DP_N_MAX },
+        .m   = { .min = IRONLAKE_DP_M_MIN,
+                 .max = IRONLAKE_DP_M_MAX },
         .m1  = { .min = IRONLAKE_M1_MIN,
                  .max = IRONLAKE_M1_MAX },
         .m2  = { .min = IRONLAKE_M2_MIN,
                  .max = IRONLAKE_M2_MAX },
-        .p   = { .min = IRONLAKE_P_DISPLAY_PORT_MIN,
-                 .max = IRONLAKE_P_DISPLAY_PORT_MAX },
-        .p1  = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN,
-                 .max = IRONLAKE_P1_DISPLAY_PORT_MAX},
-        .p2  = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT,
-                 .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW,
-                 .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST },
+        .p   = { .min = IRONLAKE_DP_P_MIN,
+                 .max = IRONLAKE_DP_P_MAX },
+        .p1  = { .min = IRONLAKE_DP_P1_MIN,
+                 .max = IRONLAKE_DP_P1_MAX},
+        .p2  = { .dot_limit = IRONLAKE_DP_P2_LIMIT,
+                 .p2_slow = IRONLAKE_DP_P2_SLOW,
+                 .p2_fast = IRONLAKE_DP_P2_FAST },
         .find_pll = intel_find_pll_ironlake_dp,
 };
 
 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
 {
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	const intel_limit_t *limit;
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
-		limit = &intel_limits_ironlake_lvds;
-	else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+	int refclk = 120;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if (dev_priv->lvds_use_ssc && dev_priv->lvds_ssc_freq == 100)
+			refclk = 100;
+
+		if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP) {
+			/* LVDS dual channel */
+			if (refclk == 100)
+				limit = &intel_limits_ironlake_dual_lvds_100m;
+			else
+				limit = &intel_limits_ironlake_dual_lvds;
+		} else {
+			if (refclk == 100)
+				limit = &intel_limits_ironlake_single_lvds_100m;
+			else
+				limit = &intel_limits_ironlake_single_lvds;
+		}
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
 			HAS_eDP)
 		limit = &intel_limits_ironlake_display_port;
 	else
-		limit = &intel_limits_ironlake_sdvo;
+		limit = &intel_limits_ironlake_dac;
 
 	return limit;
 }
@@ -768,46 +870,6 @@
 	return (err != target);
 }
 
-
-static bool
-intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
-			    int target, int refclk, intel_clock_t *best_clock)
-
-{
-	struct drm_device *dev = crtc->dev;
-	intel_clock_t clock;
-	int err = target;
-	bool found = false;
-
-	memcpy(&clock, best_clock, sizeof(intel_clock_t));
-
-	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
-		for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) {
-			/* m1 is always 0 in Pineview */
-			if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
-				break;
-			for (clock.n = limit->n.min; clock.n <= limit->n.max;
-			     clock.n++) {
-				int this_err;
-
-				intel_clock(dev, refclk, &clock);
-
-				if (!intel_PLL_is_valid(crtc, &clock))
-					continue;
-
-				this_err = abs(clock.dot - target);
-				if (this_err < err) {
-					*best_clock = clock;
-					err = this_err;
-					found = true;
-				}
-			}
-		}
-	}
-
-	return found;
-}
-
 static bool
 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock)
@@ -969,6 +1031,8 @@
 
 	/* enable it... */
 	fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
+	if (IS_I945GM(dev))
+		fbc_ctl |= FBC_C3_IDLE; /* 945 needs special SR handling */
 	fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
 	fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
 	if (obj_priv->tiling_mode != I915_TILING_NONE)
@@ -1262,7 +1326,7 @@
 		return ret;
 	}
 
-	ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+	ret = i915_gem_object_set_to_display_plane(obj);
 	if (ret != 0) {
 		i915_gem_object_unpin(obj);
 		mutex_unlock(&dev->struct_mutex);
@@ -1693,6 +1757,7 @@
 	case DRM_MODE_DPMS_OFF:
 		DRM_DEBUG_KMS("crtc %d dpms off\n", pipe);
 
+		drm_vblank_off(dev, pipe);
 		/* Disable display plane */
 		temp = I915_READ(dspcntr_reg);
 		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
@@ -2574,6 +2639,10 @@
 		sr_entries = roundup(sr_entries / cacheline_size, 1);
 		DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
 		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+	} else {
+		/* Turn off self refresh if both pipes are enabled */
+		I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+					& ~FW_BLC_SELF_EN);
 	}
 
 	DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
@@ -2617,6 +2686,10 @@
 			srwm = 1;
 		srwm &= 0x3f;
 		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+	} else {
+		/* Turn off self refresh if both pipes are enabled */
+		I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+					& ~FW_BLC_SELF_EN);
 	}
 
 	DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
@@ -2685,6 +2758,10 @@
 		if (srwm < 0)
 			srwm = 1;
 		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN | (srwm & 0x3f));
+	} else {
+		/* Turn off self refresh if both pipes are enabled */
+		I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+					& ~FW_BLC_SELF_EN);
 	}
 
 	DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
@@ -2910,10 +2987,8 @@
 		return -EINVAL;
 	}
 
-	if (is_lvds && limit->find_reduced_pll &&
-			dev_priv->lvds_downclock_avail) {
-		memcpy(&reduced_clock, &clock, sizeof(intel_clock_t));
-		has_reduced_clock = limit->find_reduced_pll(limit, crtc,
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		has_reduced_clock = limit->find_pll(limit, crtc,
 							    dev_priv->lvds_downclock,
 							    refclk,
 							    &reduced_clock);
@@ -2981,6 +3056,21 @@
 				temp |= PIPE_8BPC;
 			else
 				temp |= PIPE_6BPC;
+		} else if (is_edp) {
+			switch (dev_priv->edp_bpp/3) {
+			case 8:
+				temp |= PIPE_8BPC;
+				break;
+			case 10:
+				temp |= PIPE_10BPC;
+				break;
+			case 6:
+				temp |= PIPE_6BPC;
+				break;
+			case 12:
+				temp |= PIPE_12BPC;
+				break;
+			}
 		} else
 			temp |= PIPE_8BPC;
 		I915_WRITE(pipeconf_reg, temp);
@@ -3991,7 +4081,8 @@
 struct intel_unpin_work {
 	struct work_struct work;
 	struct drm_device *dev;
-	struct drm_gem_object *obj;
+	struct drm_gem_object *old_fb_obj;
+	struct drm_gem_object *pending_flip_obj;
 	struct drm_pending_vblank_event *event;
 	int pending;
 };
@@ -4002,8 +4093,9 @@
 		container_of(__work, struct intel_unpin_work, work);
 
 	mutex_lock(&work->dev->struct_mutex);
-	i915_gem_object_unpin(work->obj);
-	drm_gem_object_unreference(work->obj);
+	i915_gem_object_unpin(work->old_fb_obj);
+	drm_gem_object_unreference(work->pending_flip_obj);
+	drm_gem_object_unreference(work->old_fb_obj);
 	mutex_unlock(&work->dev->struct_mutex);
 	kfree(work);
 }
@@ -4026,6 +4118,12 @@
 	spin_lock_irqsave(&dev->event_lock, flags);
 	work = intel_crtc->unpin_work;
 	if (work == NULL || !work->pending) {
+		if (work && !work->pending) {
+			obj_priv = work->pending_flip_obj->driver_private;
+			DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n",
+					 obj_priv,
+					 atomic_read(&obj_priv->pending_flip));
+		}
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		return;
 	}
@@ -4046,8 +4144,11 @@
 
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
-	obj_priv = work->obj->driver_private;
-	if (atomic_dec_and_test(&obj_priv->pending_flip))
+	obj_priv = work->pending_flip_obj->driver_private;
+
+	/* Initial scanout buffer will have a 0 pending flip count */
+	if ((atomic_read(&obj_priv->pending_flip) == 0) ||
+	    atomic_dec_and_test(&obj_priv->pending_flip))
 		DRM_WAKEUP(&dev_priv->pending_flip_queue);
 	schedule_work(&work->work);
 }
@@ -4060,8 +4161,11 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
-	if (intel_crtc->unpin_work)
+	if (intel_crtc->unpin_work) {
 		intel_crtc->unpin_work->pending = 1;
+	} else {
+		DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
+	}
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 }
 
@@ -4077,7 +4181,8 @@
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_unpin_work *work;
 	unsigned long flags;
-	int ret;
+	int pipesrc_reg = (intel_crtc->pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int ret, pipesrc;
 	RING_LOCALS;
 
 	work = kzalloc(sizeof *work, GFP_KERNEL);
@@ -4089,12 +4194,13 @@
 	work->event = event;
 	work->dev = crtc->dev;
 	intel_fb = to_intel_framebuffer(crtc->fb);
-	work->obj = intel_fb->obj;
+	work->old_fb_obj = intel_fb->obj;
 	INIT_WORK(&work->work, intel_unpin_work_fn);
 
 	/* We borrow the event spin lock for protecting unpin_work */
 	spin_lock_irqsave(&dev->event_lock, flags);
 	if (intel_crtc->unpin_work) {
+		DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		kfree(work);
 		mutex_unlock(&dev->struct_mutex);
@@ -4108,19 +4214,24 @@
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj);
 	if (ret != 0) {
+		DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
+			  obj->driver_private);
 		kfree(work);
+		intel_crtc->unpin_work = NULL;
 		mutex_unlock(&dev->struct_mutex);
 		return ret;
 	}
 
-	/* Reference the old fb object for the scheduled work. */
-	drm_gem_object_reference(work->obj);
+	/* Reference the objects for the scheduled work. */
+	drm_gem_object_reference(work->old_fb_obj);
+	drm_gem_object_reference(obj);
 
 	crtc->fb = fb;
 	i915_gem_object_flush_write_domain(obj);
 	drm_vblank_get(dev, intel_crtc->pipe);
 	obj_priv = obj->driver_private;
 	atomic_inc(&obj_priv->pending_flip);
+	work->pending_flip_obj = obj;
 
 	BEGIN_LP_RING(4);
 	OUT_RING(MI_DISPLAY_FLIP |
@@ -4128,7 +4239,8 @@
 	OUT_RING(fb->pitch);
 	if (IS_I965G(dev)) {
 		OUT_RING(obj_priv->gtt_offset | obj_priv->tiling_mode);
-		OUT_RING((fb->width << 16) | fb->height);
+		pipesrc = I915_READ(pipesrc_reg); 
+		OUT_RING(pipesrc & 0x0fff0fff);
 	} else {
 		OUT_RING(obj_priv->gtt_offset);
 		OUT_RING(MI_NOOP);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1349d9f..439506c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -125,9 +125,15 @@
 
 /* I think this is a fiction */
 static int
-intel_dp_link_required(int pixel_clock)
+intel_dp_link_required(struct drm_device *dev,
+		       struct intel_output *intel_output, int pixel_clock)
 {
-	return pixel_clock * 3;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (IS_eDP(intel_output))
+		return (pixel_clock * dev_priv->edp_bpp) / 8;
+	else
+		return pixel_clock * 3;
 }
 
 static int
@@ -138,7 +144,8 @@
 	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
 	int max_lanes = intel_dp_max_lane_count(intel_output);
 
-	if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes)
+	if (intel_dp_link_required(connector->dev, intel_output, mode->clock)
+			> max_link_clock * max_lanes)
 		return MODE_CLOCK_HIGH;
 
 	if (mode->clock < 10000)
@@ -492,7 +499,8 @@
 		for (clock = 0; clock <= max_clock; clock++) {
 			int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
 
-			if (intel_dp_link_required(mode->clock) <= link_avail) {
+			if (intel_dp_link_required(encoder->dev, intel_output, mode->clock)
+					<= link_avail) {
 				dp_priv->link_bw = bws[clock];
 				dp_priv->lane_count = lane_count;
 				adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw);
@@ -1289,53 +1297,7 @@
 	if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
 		intel_dp_check_link_status(intel_output);
 }
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given DP is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it is assumed that the given
- * DP is present.
- */
-static int dp_is_present_in_vbt(struct drm_device *dev, int dp_reg)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct child_device_config *p_child;
-	int i, dp_port, ret;
 
-	if (!dev_priv->child_dev_num)
-		return 1;
-
-	dp_port = 0;
-	if (dp_reg == DP_B || dp_reg == PCH_DP_B)
-		dp_port = PORT_IDPB;
-	else if (dp_reg == DP_C || dp_reg == PCH_DP_C)
-		dp_port = PORT_IDPC;
-	else if (dp_reg == DP_D || dp_reg == PCH_DP_D)
-		dp_port = PORT_IDPD;
-
-	ret = 0;
-	for (i = 0; i < dev_priv->child_dev_num; i++) {
-		p_child = dev_priv->child_dev + i;
-		/*
-		 * If the device type is not DP, continue.
-		 */
-		if (p_child->device_type != DEVICE_TYPE_DP &&
-			p_child->device_type != DEVICE_TYPE_eDP)
-			continue;
-		/* Find the eDP port */
-		if (dp_reg == DP_A && p_child->device_type == DEVICE_TYPE_eDP) {
-			ret = 1;
-			break;
-		}
-		/* Find the DP port */
-		if (p_child->dvo_port == dp_port) {
-			ret = 1;
-			break;
-		}
-	}
-	return ret;
-}
 void
 intel_dp_init(struct drm_device *dev, int output_reg)
 {
@@ -1345,10 +1307,6 @@
 	struct intel_dp_priv *dp_priv;
 	const char *name = NULL;
 
-	if (!dp_is_present_in_vbt(dev, output_reg)) {
-		DRM_DEBUG_KMS("DP is not present. Ignore it\n");
-		return;
-	}
 	intel_output = kcalloc(sizeof(struct intel_output) + 
 			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
 	if (!intel_output)
@@ -1373,11 +1331,10 @@
 	else if (output_reg == DP_D || output_reg == PCH_DP_D)
 		intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
 
-	if (IS_eDP(intel_output)) {
-		intel_output->crtc_mask = (1 << 1);
+	if (IS_eDP(intel_output))
 		intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
-	} else
-		intel_output->crtc_mask = (1 << 0) | (1 << 1);
+
+	intel_output->crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = true;
 	connector->doublescan_allowed = 0;
 
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 371d753..aaabbcb 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -148,7 +148,7 @@
 
 	mutex_lock(&dev->struct_mutex);
 
-	ret = i915_gem_object_pin(fbo, PAGE_SIZE);
+	ret = i915_gem_object_pin(fbo, 64*1024);
 	if (ret) {
 		DRM_ERROR("failed to pin fb: %d\n", ret);
 		goto out_unref;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 0643194..0e268de 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -225,52 +225,6 @@
 	.destroy = intel_hdmi_enc_destroy,
 };
 
-/*
- * Enumerate the child dev array parsed from VBT to check whether
- * the given HDMI is present.
- * If it is present, return 1.
- * If it is not present, return false.
- * If no child dev is parsed from VBT, it assumes that the given
- * HDMI is present.
- */
-static int hdmi_is_present_in_vbt(struct drm_device *dev, int hdmi_reg)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct child_device_config *p_child;
-	int i, hdmi_port, ret;
-
-	if (!dev_priv->child_dev_num)
-		return 1;
-
-	if (hdmi_reg == SDVOB)
-		hdmi_port = DVO_B;
-	else if (hdmi_reg == SDVOC)
-		hdmi_port = DVO_C;
-	else if (hdmi_reg == HDMIB)
-		hdmi_port = DVO_B;
-	else if (hdmi_reg == HDMIC)
-		hdmi_port = DVO_C;
-	else if (hdmi_reg == HDMID)
-		hdmi_port = DVO_D;
-	else
-		return 0;
-
-	ret = 0;
-	for (i = 0; i < dev_priv->child_dev_num; i++) {
-		p_child = dev_priv->child_dev + i;
-		/*
-		 * If the device type is not HDMI, continue.
-		 */
-		if (p_child->device_type != DEVICE_TYPE_HDMI)
-			continue;
-		/* Find the HDMI port */
-		if (p_child->dvo_port == hdmi_port) {
-			ret = 1;
-			break;
-		}
-	}
-	return ret;
-}
 void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -278,10 +232,6 @@
 	struct intel_output *intel_output;
 	struct intel_hdmi_priv *hdmi_priv;
 
-	if (!hdmi_is_present_in_vbt(dev, sdvox_reg)) {
-		DRM_DEBUG_KMS("HDMI is not present. Ignored it \n");
-		return;
-	}
 	intel_output = kcalloc(sizeof(struct intel_output) +
 			       sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL);
 	if (!intel_output)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f4b4aa2..c2e8a45 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -602,6 +602,20 @@
 /* Some lid devices report incorrect lid status, assume they're connected */
 static const struct dmi_system_id bad_lid_status[] = {
 	{
+		.ident = "Compaq nx9020",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_BOARD_NAME, "3084"),
+		},
+	},
+	{
+		.ident = "Samsung SX20S",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
+			DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
+		},
+	},
+	{
 		.ident = "Aspire One",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -609,12 +623,26 @@
 		},
 	},
 	{
+		.ident = "Aspire 1810T",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1810T"),
+		},
+	},
+	{
 		.ident = "PC-81005",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MALATA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
 		},
 	},
+	{
+		.ident = "Clevo M5x0N",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+			DMI_MATCH(DMI_BOARD_NAME, "M5x0N"),
+		},
+	},
 	{ }
 };
 
@@ -629,7 +657,7 @@
 {
 	enum drm_connector_status status = connector_status_connected;
 
-	if (!acpi_lid_open() && !dmi_check_system(bad_lid_status))
+	if (!dmi_check_system(bad_lid_status) && !acpi_lid_open())
 		status = connector_status_disconnected;
 
 	return status;
@@ -912,7 +940,8 @@
 		}
 	}
 	mutex_unlock(&dev->mode_config.mutex);
-	if (temp_downclock < panel_fixed_mode->clock) {
+	if (temp_downclock < panel_fixed_mode->clock &&
+	    i915_lvds_downclock) {
 		/* We found the downclock for LVDS. */
 		dev_priv->lvds_downclock_avail = 1;
 		dev_priv->lvds_downclock = temp_downclock;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index de5144c..82678d3 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -462,14 +462,63 @@
 }
 
 /**
- * Don't check status code from this as it switches the bus back to the
- * SDVO chips which defeats the purpose of doing a bus switch in the first
- * place.
+ * Try to read the response after issuie the DDC switch command. But it
+ * is noted that we must do the action of reading response and issuing DDC
+ * switch command in one I2C transaction. Otherwise when we try to start
+ * another I2C transaction after issuing the DDC bus switch, it will be
+ * switched to the internal SDVO register.
  */
 static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output,
 					      u8 target)
 {
-	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
+	struct i2c_msg msgs[] = {
+		{
+			.addr = sdvo_priv->slave_addr >> 1,
+			.flags = 0,
+			.len = 2,
+			.buf = out_buf,
+		},
+		/* the following two are to read the response */
+		{
+			.addr = sdvo_priv->slave_addr >> 1,
+			.flags = 0,
+			.len = 1,
+			.buf = cmd_buf,
+		},
+		{
+			.addr = sdvo_priv->slave_addr >> 1,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = ret_value,
+		},
+	};
+
+	intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+					&target, 1);
+	/* write the DDC switch command argument */
+	intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target);
+
+	out_buf[0] = SDVO_I2C_OPCODE;
+	out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
+	cmd_buf[0] = SDVO_I2C_CMD_STATUS;
+	cmd_buf[1] = 0;
+	ret_value[0] = 0;
+	ret_value[1] = 0;
+
+	ret = i2c_transfer(intel_output->i2c_bus, msgs, 3);
+	if (ret != 3) {
+		/* failure in I2C transfer */
+		DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
+		return;
+	}
+	if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) {
+		DRM_DEBUG_KMS("DDC switch command returns response %d\n",
+					ret_value[0]);
+		return;
+	}
+	return;
 }
 
 static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1)
@@ -1579,6 +1628,32 @@
 	edid = drm_get_edid(&intel_output->base,
 			    intel_output->ddc_bus);
 
+	/* This is only applied to SDVO cards with multiple outputs */
+	if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) {
+		uint8_t saved_ddc, temp_ddc;
+		saved_ddc = sdvo_priv->ddc_bus;
+		temp_ddc = sdvo_priv->ddc_bus >> 1;
+		/*
+		 * Don't use the 1 as the argument of DDC bus switch to get
+		 * the EDID. It is used for SDVO SPD ROM.
+		 */
+		while(temp_ddc > 1) {
+			sdvo_priv->ddc_bus = temp_ddc;
+			edid = drm_get_edid(&intel_output->base,
+				intel_output->ddc_bus);
+			if (edid) {
+				/*
+				 * When we can get the EDID, maybe it is the
+				 * correct DDC bus. Update it.
+				 */
+				sdvo_priv->ddc_bus = temp_ddc;
+				break;
+			}
+			temp_ddc >>= 1;
+		}
+		if (edid == NULL)
+			sdvo_priv->ddc_bus = saved_ddc;
+	}
 	/* when there is no edid and no monitor is connected with VGA
 	 * port, try to use the CRT ddc to read the EDID for DVI-connector
 	 */
@@ -2270,6 +2345,14 @@
 		connector->connector_type = DRM_MODE_CONNECTOR_VGA;
 		intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
 					(1 << INTEL_ANALOG_CLONE_BIT);
+	} else if (flags & SDVO_OUTPUT_CVBS0) {
+
+		sdvo_priv->controlled_output = SDVO_OUTPUT_CVBS0;
+		encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+		connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
+		sdvo_priv->is_tv = true;
+		intel_output->needs_tv_clock = true;
+		intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
 	} else if (flags & SDVO_OUTPUT_LVDS0) {
 
 		sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 1d5b9b7..552ec11 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1840,8 +1840,6 @@
 	drm_connector_attach_property(connector,
 				   dev->mode_config.tv_bottom_margin_property,
 				   tv_priv->margin[TV_MARGIN_BOTTOM]);
-
-	dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS;
 out:
 	drm_sysfs_connector_add(connector);
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c
index 1cf4882..48227e7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_acpi.c
+++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c
@@ -90,21 +90,21 @@
 {
 	int result;
 
-	if (nouveau_dsm(dev, NOUVEAU_DSM_ACTIVE, NOUVEAU_DSM_ACTIVE_QUERY,
+	if (nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_STATE,
 								&result))
 		return -ENODEV;
 
 	NV_INFO(dev, "_DSM hardware status gave 0x%x\n", result);
 
-	if (result & 0x1) {	/* Stamina mode - disable the external GPU */
+	if (result) { /* Ensure that the external GPU is enabled */
+		nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_SPEED, NULL);
+		nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_SPEED,
+									NULL);
+	} else { /* Stamina mode - disable the external GPU */
 		nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_STAMINA,
 									NULL);
 		nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_STAMINA,
 									NULL);
-	} else {		/* Ensure that the external GPU is enabled */
-		nouveau_dsm(dev, NOUVEAU_DSM_LED, NOUVEAU_DSM_LED_SPEED, NULL);
-		nouveau_dsm(dev, NOUVEAU_DSM_POWER, NOUVEAU_DSM_POWER_SPEED,
-									NULL);
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index ba14397..0e9cd1d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -310,63 +310,22 @@
 	struct drm_device *dev = bios->dev;
 
 	/* C51 has misaligned regs on purpose. Marvellous */
-	if (reg & 0x2 || (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51)) {
-		NV_ERROR(dev, "========== misaligned reg 0x%08X ==========\n",
-			 reg);
-		return 0;
-	}
-	/*
-	 * Warn on C51 regs that have not been verified accessible in
-	 * mmiotracing
-	 */
+	if (reg & 0x2 ||
+	    (reg & 0x1 && dev_priv->VBIOS.pub.chip_version != 0x51))
+		NV_ERROR(dev, "======= misaligned reg 0x%08X =======\n", reg);
+
+	/* warn on C51 regs that haven't been verified accessible in tracing */
 	if (reg & 0x1 && dev_priv->VBIOS.pub.chip_version == 0x51 &&
 	    reg != 0x130d && reg != 0x1311 && reg != 0x60081d)
 		NV_WARN(dev, "=== C51 misaligned reg 0x%08X not verified ===\n",
 			reg);
 
-	/* Trust the init scripts on G80 */
-	if (dev_priv->card_type >= NV_50)
-		return 1;
-
-	#define WITHIN(x, y, z) ((x >= y) && (x < y + z))
-	if (WITHIN(reg, NV_PMC_OFFSET, NV_PMC_SIZE))
-		return 1;
-	if (WITHIN(reg, NV_PBUS_OFFSET, NV_PBUS_SIZE))
-		return 1;
-	if (WITHIN(reg, NV_PFIFO_OFFSET, NV_PFIFO_SIZE))
-		return 1;
-	if (dev_priv->VBIOS.pub.chip_version >= 0x30 &&
-	    (WITHIN(reg, 0x4000, 0x600) || reg == 0x00004600))
-		return 1;
-	if (dev_priv->VBIOS.pub.chip_version >= 0x40 &&
-						WITHIN(reg, 0xc000, 0x48))
-		return 1;
-	if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0000d204)
-		return 1;
-	if (dev_priv->VBIOS.pub.chip_version >= 0x40) {
-		if (reg == 0x00011014 || reg == 0x00020328)
-			return 1;
-		if (WITHIN(reg, 0x88000, NV_PBUS_SIZE)) /* new PBUS */
-			return 1;
+	if (reg >= (8*1024*1024)) {
+		NV_ERROR(dev, "=== reg 0x%08x out of mapped bounds ===\n", reg);
+		return 0;
 	}
-	if (WITHIN(reg, NV_PFB_OFFSET, NV_PFB_SIZE))
-		return 1;
-	if (WITHIN(reg, NV_PEXTDEV_OFFSET, NV_PEXTDEV_SIZE))
-		return 1;
-	if (WITHIN(reg, NV_PCRTC0_OFFSET, NV_PCRTC0_SIZE * 2))
-		return 1;
-	if (WITHIN(reg, NV_PRAMDAC0_OFFSET, NV_PRAMDAC0_SIZE * 2))
-		return 1;
-	if (dev_priv->VBIOS.pub.chip_version >= 0x17 && reg == 0x0070fff0)
-		return 1;
-	if (dev_priv->VBIOS.pub.chip_version == 0x51 &&
-				WITHIN(reg, NV_PRAMIN_OFFSET, NV_PRAMIN_SIZE))
-		return 1;
-	#undef WITHIN
 
-	NV_ERROR(dev, "========== unknown reg 0x%08X ==========\n", reg);
-
-	return 0;
+	return 1;
 }
 
 static bool
@@ -1906,7 +1865,7 @@
 
 	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
 
-	if (dev_priv->card_type >= NV_50)
+	if (dev_priv->card_type >= NV_40)
 		return 1;
 
 	/*
@@ -3196,16 +3155,25 @@
 	}
 #ifdef __powerpc__
 	/* Powerbook specific quirks */
-	if (script == LVDS_RESET && ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0329))
-		nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
-	if ((dev->pci_device & 0xffff) == 0x0179 || (dev->pci_device & 0xffff) == 0x0189 || (dev->pci_device & 0xffff) == 0x0329) {
-		if (script == LVDS_PANEL_ON) {
-			bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) | (1 << 31));
-			bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
-		}
-		if (script == LVDS_PANEL_OFF) {
-			bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL, bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL) & ~(1 << 31));
-			bios_wr32(bios, NV_PCRTC_GPIO_EXT, bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
+	if ((dev->pci_device & 0xffff) == 0x0179 ||
+	    (dev->pci_device & 0xffff) == 0x0189 ||
+	    (dev->pci_device & 0xffff) == 0x0329) {
+		if (script == LVDS_RESET) {
+			nv_write_tmds(dev, dcbent->or, 0, 0x02, 0x72);
+
+		} else if (script == LVDS_PANEL_ON) {
+			bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
+				  bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
+				  | (1 << 31));
+			bios_wr32(bios, NV_PCRTC_GPIO_EXT,
+				  bios_rd32(bios, NV_PCRTC_GPIO_EXT) | 1);
+
+		} else if (script == LVDS_PANEL_OFF) {
+			bios_wr32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL,
+				  bios_rd32(bios, NV_PBUS_DEBUG_DUALHEAD_CTL)
+				  & ~(1 << 31));
+			bios_wr32(bios, NV_PCRTC_GPIO_EXT,
+				  bios_rd32(bios, NV_PCRTC_GPIO_EXT) & ~3);
 		}
 	}
 #endif
@@ -3797,7 +3765,6 @@
 	 */
 
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct init_exec iexec = {true, false};
 	struct nvbios *bios = &dev_priv->VBIOS;
 	uint8_t *table = &bios->data[bios->display.script_table_ptr];
 	uint8_t *otable = NULL;
@@ -3877,8 +3844,6 @@
 		}
 	}
 
-	bios->display.output = dcbent;
-
 	if (pxclk == 0) {
 		script = ROM16(otable[6]);
 		if (!script) {
@@ -3887,7 +3852,7 @@
 		}
 
 		NV_TRACE(dev, "0x%04X: parsing output script 0\n", script);
-		parse_init_table(bios, script, &iexec);
+		nouveau_bios_run_init_table(dev, script, dcbent);
 	} else
 	if (pxclk == -1) {
 		script = ROM16(otable[8]);
@@ -3897,7 +3862,7 @@
 		}
 
 		NV_TRACE(dev, "0x%04X: parsing output script 1\n", script);
-		parse_init_table(bios, script, &iexec);
+		nouveau_bios_run_init_table(dev, script, dcbent);
 	} else
 	if (pxclk == -2) {
 		if (table[4] >= 12)
@@ -3910,7 +3875,7 @@
 		}
 
 		NV_TRACE(dev, "0x%04X: parsing output script 2\n", script);
-		parse_init_table(bios, script, &iexec);
+		nouveau_bios_run_init_table(dev, script, dcbent);
 	} else
 	if (pxclk > 0) {
 		script = ROM16(otable[table[4] + i*6 + 2]);
@@ -3922,7 +3887,7 @@
 		}
 
 		NV_TRACE(dev, "0x%04X: parsing clock script 0\n", script);
-		parse_init_table(bios, script, &iexec);
+		nouveau_bios_run_init_table(dev, script, dcbent);
 	} else
 	if (pxclk < 0) {
 		script = ROM16(otable[table[4] + i*6 + 4]);
@@ -3934,7 +3899,7 @@
 		}
 
 		NV_TRACE(dev, "0x%04X: parsing clock script 1\n", script);
-		parse_init_table(bios, script, &iexec);
+		nouveau_bios_run_init_table(dev, script, dcbent);
 	}
 
 	return 0;
@@ -5434,52 +5399,49 @@
 parse_dcb15_entry(struct drm_device *dev, struct parsed_dcb *dcb,
 		  uint32_t conn, uint32_t conf, struct dcb_entry *entry)
 {
-	if (conn != 0xf0003f00 && conn != 0xf2247f10 && conn != 0xf2204001 &&
-	    conn != 0xf2204301 && conn != 0xf2204311 && conn != 0xf2208001 &&
-	    conn != 0xf2244001 && conn != 0xf2244301 && conn != 0xf2244311 &&
-	    conn != 0xf4204011 && conn != 0xf4208011 && conn != 0xf4248011 &&
-	    conn != 0xf2045ff2 && conn != 0xf2045f14 && conn != 0xf207df14 &&
-	    conn != 0xf2205004 && conn != 0xf2209004) {
-		NV_ERROR(dev, "Unknown DCB 1.5 entry, please report\n");
-
-		/* cause output setting to fail for !TV, so message is seen */
-		if ((conn & 0xf) != 0x1)
-			dcb->entries = 0;
-
+	switch (conn & 0x0000000f) {
+	case 0:
+		entry->type = OUTPUT_ANALOG;
+		break;
+	case 1:
+		entry->type = OUTPUT_TV;
+		break;
+	case 2:
+	case 3:
+		entry->type = OUTPUT_LVDS;
+		break;
+	case 4:
+		switch ((conn & 0x000000f0) >> 4) {
+		case 0:
+			entry->type = OUTPUT_TMDS;
+			break;
+		case 1:
+			entry->type = OUTPUT_LVDS;
+			break;
+		default:
+			NV_ERROR(dev, "Unknown DCB subtype 4/%d\n",
+				 (conn & 0x000000f0) >> 4);
+			return false;
+		}
+		break;
+	default:
+		NV_ERROR(dev, "Unknown DCB type %d\n", conn & 0x0000000f);
 		return false;
 	}
-	/* most of the below is a "best guess" atm */
-	entry->type = conn & 0xf;
-	if (entry->type == 2)
-		/* another way of specifying straps based lvds... */
-		entry->type = OUTPUT_LVDS;
-	if (entry->type == 4) { /* digital */
-		if (conn & 0x10)
-			entry->type = OUTPUT_LVDS;
-		else
-			entry->type = OUTPUT_TMDS;
-	}
-	/* what's in bits 5-13? could be some encoder maker thing, in tv case */
-	entry->i2c_index = (conn >> 14) & 0xf;
-	/* raw heads field is in range 0-1, so move to 1-2 */
-	entry->heads = ((conn >> 18) & 0x7) + 1;
-	entry->location = (conn >> 21) & 0xf;
-	/* unused: entry->bus = (conn >> 25) & 0x7; */
-	/* set or to be same as heads -- hopefully safe enough */
-	entry->or = entry->heads;
+
+	entry->i2c_index = (conn & 0x0003c000) >> 14;
+	entry->heads = ((conn & 0x001c0000) >> 18) + 1;
+	entry->or = entry->heads; /* same as heads, hopefully safe enough */
+	entry->location = (conn & 0x01e00000) >> 21;
+	entry->bus = (conn & 0x0e000000) >> 25;
 	entry->duallink_possible = false;
 
 	switch (entry->type) {
 	case OUTPUT_ANALOG:
 		entry->crtconf.maxfreq = (conf & 0xffff) * 10;
 		break;
-	case OUTPUT_LVDS:
-		/*
-		 * This is probably buried in conn's unknown bits.
-		 * This will upset EDID-ful models, if they exist
-		 */
-		entry->lvdsconf.use_straps_for_mode = true;
-		entry->lvdsconf.use_power_scripts = true;
+	case OUTPUT_TV:
+		entry->tvconf.has_component_output = false;
 		break;
 	case OUTPUT_TMDS:
 		/*
@@ -5488,8 +5450,12 @@
 		 */
 		fabricate_vga_output(dcb, entry->i2c_index, entry->heads);
 		break;
-	case OUTPUT_TV:
-		entry->tvconf.has_component_output = false;
+	case OUTPUT_LVDS:
+		if ((conn & 0x00003f00) != 0x10)
+			entry->lvdsconf.use_straps_for_mode = true;
+		entry->lvdsconf.use_power_scripts = true;
+		break;
+	default:
 		break;
 	}
 
@@ -5564,11 +5530,13 @@
 	dcb->entries = newentries;
 }
 
-static int parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
+static int
+parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
 {
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct bios_parsed_dcb *bdcb = &bios->bdcb;
 	struct parsed_dcb *dcb;
-	uint16_t dcbptr, i2ctabptr = 0;
+	uint16_t dcbptr = 0, i2ctabptr = 0;
 	uint8_t *dcbtable;
 	uint8_t headerlen = 0x4, entries = DCB_MAX_NUM_ENTRIES;
 	bool configblock = true;
@@ -5579,16 +5547,18 @@
 	dcb->entries = 0;
 
 	/* get the offset from 0x36 */
-	dcbptr = ROM16(bios->data[0x36]);
+	if (dev_priv->card_type > NV_04) {
+		dcbptr = ROM16(bios->data[0x36]);
+		if (dcbptr == 0x0000)
+			NV_WARN(dev, "No output data (DCB) found in BIOS\n");
+	}
 
+	/* this situation likely means a really old card, pre DCB */
 	if (dcbptr == 0x0) {
-		NV_WARN(dev, "No output data (DCB) found in BIOS, "
-			       "assuming a CRT output exists\n");
-		/* this situation likely means a really old card, pre DCB */
+		NV_INFO(dev, "Assuming a CRT output exists\n");
 		fabricate_vga_output(dcb, LEGACY_I2C_CRT, 1);
 
-		if (nv04_tv_identify(dev,
-				     bios->legacy.i2c_indices.tv) >= 0)
+		if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
 			fabricate_tv_output(dcb, twoHeads);
 
 		return 0;
@@ -5892,9 +5862,11 @@
 	struct nvbios *bios = &dev_priv->VBIOS;
 	struct init_exec iexec = { true, false };
 
+	mutex_lock(&bios->lock);
 	bios->display.output = dcbent;
 	parse_init_table(bios, table, &iexec);
 	bios->display.output = NULL;
+	mutex_unlock(&bios->lock);
 }
 
 static bool NVInitVBIOS(struct drm_device *dev)
@@ -5903,6 +5875,7 @@
 	struct nvbios *bios = &dev_priv->VBIOS;
 
 	memset(bios, 0, sizeof(struct nvbios));
+	mutex_init(&bios->lock);
 	bios->dev = dev;
 
 	if (!NVShadowVBIOS(dev, bios->data))
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h
index 058e98c..fd94bd6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.h
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.h
@@ -205,6 +205,8 @@
 	struct drm_device *dev;
 	struct nouveau_bios_info pub;
 
+	struct mutex lock;
+
 	uint8_t data[NV_PROM_SIZE];
 	unsigned int length;
 	bool execute;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index e342a41..028719f 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -65,8 +65,10 @@
 
 	/*
 	 * Some of the tile_flags have a periodic structure of N*4096 bytes,
-	 * align to to that as well as the page size. Overallocate memory to
-	 * avoid corruption of other buffer objects.
+	 * align to to that as well as the page size. Align the size to the
+	 * appropriate boundaries. This does imply that sizes are rounded up
+	 * 3-7 pages, so be aware of this and do not waste memory by allocating
+	 * many small buffers.
 	 */
 	if (dev_priv->card_type == NV_50) {
 		uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15;
@@ -77,22 +79,20 @@
 		case 0x2800:
 		case 0x4800:
 		case 0x7a00:
-			*size = roundup(*size, block_size);
 			if (is_power_of_2(block_size)) {
-				*size += 3 * block_size;
 				for (i = 1; i < 10; i++) {
 					*align = 12 * i * block_size;
 					if (!(*align % 65536))
 						break;
 				}
 			} else {
-				*size += 6 * block_size;
 				for (i = 1; i < 10; i++) {
 					*align = 8 * i * block_size;
 					if (!(*align % 65536))
 						break;
 				}
 			}
+			*size = roundup(*size, *align);
 			break;
 		default:
 			break;
@@ -469,6 +469,8 @@
 
 	ret = ttm_bo_move_accel_cleanup(&nvbo->bo, fence, NULL,
 					evict, no_wait, new_mem);
+	if (nvbo->channel && nvbo->channel != chan)
+		ret = nouveau_fence_wait(fence, NULL, false, false);
 	nouveau_fence_unref((void *)&fence);
 	return ret;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index 343d718..2281f99 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -278,12 +278,11 @@
 	/* Ensure the channel is no longer active on the GPU */
 	pfifo->reassign(dev, false);
 
-	if (pgraph->channel(dev) == chan) {
-		pgraph->fifo_access(dev, false);
+	pgraph->fifo_access(dev, false);
+	if (pgraph->channel(dev) == chan)
 		pgraph->unload_context(dev);
-		pgraph->fifo_access(dev, true);
-	}
 	pgraph->destroy_context(chan);
+	pgraph->fifo_access(dev, true);
 
 	if (pfifo->channel_id(dev) == chan->id) {
 		pfifo->disable(dev);
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 5a10deb..d2f6335 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -24,9 +24,12 @@
  *
  */
 
+#include <acpi/button.h>
+
 #include "drmP.h"
 #include "drm_edid.h"
 #include "drm_crtc_helper.h"
+
 #include "nouveau_reg.h"
 #include "nouveau_drv.h"
 #include "nouveau_encoder.h"
@@ -83,14 +86,17 @@
 static void
 nouveau_connector_destroy(struct drm_connector *drm_connector)
 {
-	struct nouveau_connector *connector = nouveau_connector(drm_connector);
-	struct drm_device *dev = connector->base.dev;
+	struct nouveau_connector *nv_connector =
+		nouveau_connector(drm_connector);
+	struct drm_device *dev;
 
-	NV_DEBUG_KMS(dev, "\n");
-
-	if (!connector)
+	if (!nv_connector)
 		return;
 
+	dev = nv_connector->base.dev;
+	NV_DEBUG_KMS(dev, "\n");
+
+	kfree(nv_connector->edid);
 	drm_sysfs_connector_remove(drm_connector);
 	drm_connector_cleanup(drm_connector);
 	kfree(drm_connector);
@@ -233,10 +239,21 @@
 	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
 		nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
 	if (nv_encoder && nv_connector->native_mode) {
+#ifdef CONFIG_ACPI
+		if (!nouveau_ignorelid && !acpi_lid_open())
+			return connector_status_disconnected;
+#endif
 		nouveau_connector_set_encoder(connector, nv_encoder);
 		return connector_status_connected;
 	}
 
+	/* Cleanup the previous EDID block. */
+	if (nv_connector->edid) {
+		drm_mode_connector_update_edid_property(connector, NULL);
+		kfree(nv_connector->edid);
+		nv_connector->edid = NULL;
+	}
+
 	i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
 	if (i2c) {
 		nouveau_connector_ddc_prepare(connector, &flags);
@@ -247,7 +264,7 @@
 		if (!nv_connector->edid) {
 			NV_ERROR(dev, "DDC responded, but no EDID for %s\n",
 				 drm_get_connector_name(connector));
-			return connector_status_disconnected;
+			goto detect_analog;
 		}
 
 		if (nv_encoder->dcb->type == OUTPUT_DP &&
@@ -281,6 +298,7 @@
 		return connector_status_connected;
 	}
 
+detect_analog:
 	nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
 	if (!nv_encoder)
 		nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
@@ -687,8 +705,12 @@
 	 */
 	if (!nv_connector->edid && !nv_connector->native_mode &&
 	    !dev_priv->VBIOS.pub.fp_no_ddc) {
-		nv_connector->edid =
+		struct edid *edid =
 			(struct edid *)nouveau_bios_embedded_edid(dev);
+		if (edid) {
+			nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+			*(nv_connector->edid) = *edid;
+		}
 	}
 
 	if (!nv_connector->edid)
diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c
index 7afbe8b..50d9e67 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dma.c
@@ -126,47 +126,52 @@
 	chan->dma.cur += nr_dwords;
 }
 
-static inline bool
-READ_GET(struct nouveau_channel *chan, uint32_t *get)
+/* Fetch and adjust GPU GET pointer
+ *
+ * Returns:
+ *  value >= 0, the adjusted GET pointer
+ *  -EINVAL if GET pointer currently outside main push buffer
+ *  -EBUSY if timeout exceeded
+ */
+static inline int
+READ_GET(struct nouveau_channel *chan, uint32_t *prev_get, uint32_t *timeout)
 {
 	uint32_t val;
 
 	val = nvchan_rd32(chan, chan->user_get);
-	if (val < chan->pushbuf_base ||
-	    val > chan->pushbuf_base + (chan->dma.max << 2)) {
-		/* meaningless to dma_wait() except to know whether the
-		 * GPU has stalled or not
-		 */
-		*get = val;
-		return false;
+
+	/* reset counter as long as GET is still advancing, this is
+	 * to avoid misdetecting a GPU lockup if the GPU happens to
+	 * just be processing an operation that takes a long time
+	 */
+	if (val != *prev_get) {
+		*prev_get = val;
+		*timeout = 0;
 	}
 
-	*get = (val - chan->pushbuf_base) >> 2;
-	return true;
+	if ((++*timeout & 0xff) == 0) {
+		DRM_UDELAY(1);
+		if (*timeout > 100000)
+			return -EBUSY;
+	}
+
+	if (val < chan->pushbuf_base ||
+	    val > chan->pushbuf_base + (chan->dma.max << 2))
+		return -EINVAL;
+
+	return (val - chan->pushbuf_base) >> 2;
 }
 
 int
 nouveau_dma_wait(struct nouveau_channel *chan, int size)
 {
-	uint32_t get, prev_get = 0, cnt = 0;
-	bool get_valid;
+	uint32_t prev_get = 0, cnt = 0;
+	int get;
 
 	while (chan->dma.free < size) {
-		/* reset counter as long as GET is still advancing, this is
-		 * to avoid misdetecting a GPU lockup if the GPU happens to
-		 * just be processing an operation that takes a long time
-		 */
-		get_valid = READ_GET(chan, &get);
-		if (get != prev_get) {
-			prev_get = get;
-			cnt = 0;
-		}
-
-		if ((++cnt & 0xff) == 0) {
-			DRM_UDELAY(1);
-			if (cnt > 100000)
-				return -EBUSY;
-		}
+		get = READ_GET(chan, &prev_get, &cnt);
+		if (unlikely(get == -EBUSY))
+			return -EBUSY;
 
 		/* loop until we have a usable GET pointer.  the value
 		 * we read from the GPU may be outside the main ring if
@@ -177,7 +182,7 @@
 		 * from the SKIPS area, so the code below doesn't have to deal
 		 * with some fun corner cases.
 		 */
-		if (!get_valid || get < NOUVEAU_DMA_SKIPS)
+		if (unlikely(get == -EINVAL) || get < NOUVEAU_DMA_SKIPS)
 			continue;
 
 		if (get <= chan->dma.cur) {
@@ -203,6 +208,19 @@
 			 * after processing the currently pending commands.
 			 */
 			OUT_RING(chan, chan->pushbuf_base | 0x20000000);
+
+			/* wait for GET to depart from the skips area.
+			 * prevents writing GET==PUT and causing a race
+			 * condition that causes us to think the GPU is
+			 * idle when it's not.
+			 */
+			do {
+				get = READ_GET(chan, &prev_get, &cnt);
+				if (unlikely(get == -EBUSY))
+					return -EBUSY;
+				if (unlikely(get == -EINVAL))
+					continue;
+			} while (get <= NOUVEAU_DMA_SKIPS);
 			WRITE_PUT(NOUVEAU_DMA_SKIPS);
 
 			/* we're now submitting commands at the start of
diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index 9e2926c..f954ad9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -490,7 +490,8 @@
 		if (!nv_wait(NV50_AUXCH_CTRL(index), 0x00010000, 0x00000000)) {
 			NV_ERROR(dev, "expected bit 16 == 0, got 0x%08x\n",
 				 nv_rd32(dev, NV50_AUXCH_CTRL(index)));
-			return -EBUSY;
+			ret = -EBUSY;
+			goto out;
 		}
 
 		udelay(400);
@@ -502,6 +503,11 @@
 	}
 
 	if (cmd & 1) {
+		if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) {
+			ret = -EREMOTEIO;
+			goto out;
+		}
+
 		for (i = 0; i < 4; i++) {
 			data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i));
 			NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]);
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index 06eb993..da3b93b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -56,7 +56,7 @@
 module_param_named(vram_pushbuf, nouveau_vram_pushbuf, int, 0400);
 
 MODULE_PARM_DESC(vram_notify, "Force DMA notifiers to be in VRAM");
-int nouveau_vram_notify;
+int nouveau_vram_notify = 1;
 module_param_named(vram_notify, nouveau_vram_notify, int, 0400);
 
 MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (>=GeForce 8)");
@@ -71,6 +71,18 @@
 int nouveau_uscript_tmds = -1;
 module_param_named(uscript_tmds, nouveau_uscript_tmds, int, 0400);
 
+MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status");
+int nouveau_ignorelid = 0;
+module_param_named(ignorelid, nouveau_ignorelid, int, 0400);
+
+MODULE_PARM_DESC(noagp, "Disable all acceleration");
+int nouveau_noaccel = 0;
+module_param_named(noaccel, nouveau_noaccel, int, 0400);
+
+MODULE_PARM_DESC(noagp, "Disable fbcon acceleration");
+int nouveau_nofbaccel = 0;
+module_param_named(nofbaccel, nouveau_nofbaccel, int, 0400);
+
 MODULE_PARM_DESC(tv_norm, "Default TV norm.\n"
 		 "\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n"
 		 "\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n"
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 026419f..1c15ef3 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -509,6 +509,8 @@
 	void __iomem *ramin;
 	uint32_t ramin_size;
 
+	struct nouveau_bo *vga_ram;
+
 	struct workqueue_struct *wq;
 	struct work_struct irq_work;
 
@@ -581,6 +583,7 @@
 	uint64_t vm_end;
 	struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR];
 	int vm_vram_pt_nr;
+	uint64_t vram_sys_base;
 
 	/* the mtrr covering the FB */
 	int fb_mtrr;
@@ -675,6 +678,9 @@
 extern int nouveau_reg_debug;
 extern char *nouveau_vbios;
 extern int nouveau_ctxfw;
+extern int nouveau_ignorelid;
+extern int nouveau_nofbaccel;
+extern int nouveau_noaccel;
 
 /* nouveau_state.c */
 extern void nouveau_preclose(struct drm_device *dev, struct drm_file *);
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 0b05c86..ea879a2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -107,6 +107,34 @@
 	.fb_setcmap = drm_fb_helper_setcmap,
 };
 
+static struct fb_ops nv04_fbcon_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = drm_fb_helper_check_var,
+	.fb_set_par = drm_fb_helper_set_par,
+	.fb_setcolreg = drm_fb_helper_setcolreg,
+	.fb_fillrect = nv04_fbcon_fillrect,
+	.fb_copyarea = nv04_fbcon_copyarea,
+	.fb_imageblit = nv04_fbcon_imageblit,
+	.fb_sync = nouveau_fbcon_sync,
+	.fb_pan_display = drm_fb_helper_pan_display,
+	.fb_blank = drm_fb_helper_blank,
+	.fb_setcmap = drm_fb_helper_setcmap,
+};
+
+static struct fb_ops nv50_fbcon_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = drm_fb_helper_check_var,
+	.fb_set_par = drm_fb_helper_set_par,
+	.fb_setcolreg = drm_fb_helper_setcolreg,
+	.fb_fillrect = nv50_fbcon_fillrect,
+	.fb_copyarea = nv50_fbcon_copyarea,
+	.fb_imageblit = nv50_fbcon_imageblit,
+	.fb_sync = nouveau_fbcon_sync,
+	.fb_pan_display = drm_fb_helper_pan_display,
+	.fb_blank = drm_fb_helper_blank,
+	.fb_setcmap = drm_fb_helper_setcmap,
+};
+
 static void nouveau_fbcon_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
 				    u16 blue, int regno)
 {
@@ -267,8 +295,12 @@
 	dev_priv->fbdev_info = info;
 
 	strcpy(info->fix.id, "nouveaufb");
-	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
-		      FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_IMAGEBLIT;
+	if (nouveau_nofbaccel)
+		info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_DISABLED;
+	else
+		info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
+			      FBINFO_HWACCEL_FILLRECT |
+			      FBINFO_HWACCEL_IMAGEBLIT;
 	info->fbops = &nouveau_fbcon_ops;
 	info->fix.smem_start = dev->mode_config.fb_base + nvbo->bo.offset -
 			       dev_priv->vm_vram_base;
@@ -316,13 +348,15 @@
 	par->nouveau_fb = nouveau_fb;
 	par->dev = dev;
 
-	if (dev_priv->channel) {
+	if (dev_priv->channel && !nouveau_nofbaccel) {
 		switch (dev_priv->card_type) {
 		case NV_50:
 			nv50_fbcon_accel_init(info);
+			info->fbops = &nv50_fbcon_ops;
 			break;
 		default:
 			nv04_fbcon_accel_init(info);
+			info->fbops = &nv04_fbcon_ops;
 			break;
 		};
 	}
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.h b/drivers/gpu/drm/nouveau/nouveau_fbcon.h
index 462e0b8..f9c34e1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.h
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.h
@@ -40,7 +40,13 @@
 void nouveau_fbcon_restore(void);
 void nouveau_fbcon_zfill(struct drm_device *dev);
 
+void nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region);
+void nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+void nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image);
 int nv04_fbcon_accel_init(struct fb_info *info);
+void nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
+void nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region);
+void nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image);
 int nv50_fbcon_accel_init(struct fb_info *info);
 
 void nouveau_fbcon_gpu_lockup(struct fb_info *info);
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 2009db2..70cc308 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -321,6 +321,7 @@
 		else {
 			NV_ERROR(dev, "invalid valid domains: 0x%08x\n",
 				 b->valid_domains);
+			list_add_tail(&nvbo->entry, &op->both_list);
 			validate_fini(op, NULL);
 			return -EINVAL;
 		}
@@ -466,13 +467,14 @@
 static int
 nouveau_gem_pushbuf_reloc_apply(struct nouveau_channel *chan, int nr_bo,
 				struct drm_nouveau_gem_pushbuf_bo *bo,
-				int nr_relocs, uint64_t ptr_relocs,
-				int nr_dwords, int first_dword,
+				unsigned nr_relocs, uint64_t ptr_relocs,
+				unsigned nr_dwords, unsigned first_dword,
 				uint32_t *pushbuf, bool is_iomem)
 {
 	struct drm_nouveau_gem_pushbuf_reloc *reloc = NULL;
 	struct drm_device *dev = chan->dev;
-	int ret = 0, i;
+	int ret = 0;
+	unsigned i;
 
 	reloc = u_memcpya(ptr_relocs, nr_relocs, sizeof(*reloc));
 	if (IS_ERR(reloc))
@@ -667,6 +669,18 @@
 	}
 	pbbo = nouveau_gem_object(gem);
 
+	if ((req->offset & 3) || req->nr_dwords < 2 ||
+	    (unsigned long)req->offset > (unsigned long)pbbo->bo.mem.size ||
+	    (unsigned long)req->nr_dwords >
+	     ((unsigned long)(pbbo->bo.mem.size - req->offset ) >> 2)) {
+		NV_ERROR(dev, "pb call misaligned or out of bounds: "
+			      "%d + %d * 4 > %ld\n",
+			 req->offset, req->nr_dwords, pbbo->bo.mem.size);
+		ret = -EINVAL;
+		drm_gem_object_unreference(gem);
+		goto out;
+	}
+
 	ret = ttm_bo_reserve(&pbbo->bo, false, false, true,
 			     chan->fence.sequence);
 	if (ret) {
@@ -911,7 +925,9 @@
 	}
 
 	if (req->flags & NOUVEAU_GEM_CPU_PREP_NOBLOCK) {
+		spin_lock(&nvbo->bo.lock);
 		ret = ttm_bo_wait(&nvbo->bo, false, false, no_wait);
+		spin_unlock(&nvbo->bo.lock);
 	} else {
 		ret = ttm_bo_synccpu_write_grab(&nvbo->bo, no_wait);
 		if (ret == 0)
diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.c b/drivers/gpu/drm/nouveau/nouveau_grctx.c
index 419f4c2..c7ebec6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_grctx.c
+++ b/drivers/gpu/drm/nouveau/nouveau_grctx.c
@@ -97,8 +97,8 @@
 		}
 
 		pgraph->ctxvals = kmalloc(fw->size, GFP_KERNEL);
-		if (!pgraph->ctxprog) {
-			NV_ERROR(dev, "OOM copying ctxprog\n");
+		if (!pgraph->ctxvals) {
+			NV_ERROR(dev, "OOM copying ctxvals\n");
 			release_firmware(fw);
 			nouveau_grctx_fini(dev);
 			return -ENOMEM;
diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c
index 919a619..447f9f6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_irq.c
+++ b/drivers/gpu/drm/nouveau/nouveau_irq.c
@@ -211,6 +211,20 @@
 								get + 4);
 		}
 
+		if (status & NV_PFIFO_INTR_SEMAPHORE) {
+			uint32_t sem;
+
+			status &= ~NV_PFIFO_INTR_SEMAPHORE;
+			nv_wr32(dev, NV03_PFIFO_INTR_0,
+				NV_PFIFO_INTR_SEMAPHORE);
+
+			sem = nv_rd32(dev, NV10_PFIFO_CACHE1_SEMAPHORE);
+			nv_wr32(dev, NV10_PFIFO_CACHE1_SEMAPHORE, sem | 0x1);
+
+			nv_wr32(dev, NV03_PFIFO_CACHE1_GET, get + 4);
+			nv_wr32(dev, NV04_PFIFO_CACHE1_PULL0, 1);
+		}
+
 		if (status) {
 			NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
 				status, chid);
@@ -483,6 +497,13 @@
 	if (nsource & NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD) {
 		if (nouveau_pgraph_intr_swmthd(dev, &trap))
 			unhandled = 1;
+	} else if (nsource & NV03_PGRAPH_NSOURCE_DMA_VTX_PROTECTION) {
+		uint32_t v = nv_rd32(dev, 0x402000);
+		nv_wr32(dev, 0x402000, v);
+
+		/* dump the error anyway for now: it's useful for
+		   Gallium development */
+		unhandled = 1;
 	} else {
 		unhandled = 1;
 	}
@@ -559,86 +580,99 @@
 static void
 nv50_pgraph_irq_handler(struct drm_device *dev)
 {
-	uint32_t status, nsource;
+	uint32_t status;
 
-	status = nv_rd32(dev, NV03_PGRAPH_INTR);
-	nsource = nv_rd32(dev, NV03_PGRAPH_NSOURCE);
+	while ((status = nv_rd32(dev, NV03_PGRAPH_INTR))) {
+		uint32_t nsource = nv_rd32(dev, NV03_PGRAPH_NSOURCE);
 
-	if (status & 0x00000001) {
-		nouveau_pgraph_intr_notify(dev, nsource);
-		status &= ~0x00000001;
-		nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000001);
-	}
+		if (status & 0x00000001) {
+			nouveau_pgraph_intr_notify(dev, nsource);
+			status &= ~0x00000001;
+			nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000001);
+		}
 
-	if (status & 0x00000010) {
-		nouveau_pgraph_intr_error(dev, nsource |
-					  NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD);
+		if (status & 0x00000010) {
+			nouveau_pgraph_intr_error(dev, nsource |
+					NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD);
 
-		status &= ~0x00000010;
-		nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000010);
-	}
+			status &= ~0x00000010;
+			nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000010);
+		}
 
-	if (status & 0x00001000) {
-		nv_wr32(dev, 0x400500, 0x00000000);
-		nv_wr32(dev, NV03_PGRAPH_INTR, NV_PGRAPH_INTR_CONTEXT_SWITCH);
-		nv_wr32(dev, NV40_PGRAPH_INTR_EN, nv_rd32(dev,
-			NV40_PGRAPH_INTR_EN) & ~NV_PGRAPH_INTR_CONTEXT_SWITCH);
-		nv_wr32(dev, 0x400500, 0x00010001);
+		if (status & 0x00001000) {
+			nv_wr32(dev, 0x400500, 0x00000000);
+			nv_wr32(dev, NV03_PGRAPH_INTR,
+				NV_PGRAPH_INTR_CONTEXT_SWITCH);
+			nv_wr32(dev, NV40_PGRAPH_INTR_EN, nv_rd32(dev,
+				NV40_PGRAPH_INTR_EN) &
+				~NV_PGRAPH_INTR_CONTEXT_SWITCH);
+			nv_wr32(dev, 0x400500, 0x00010001);
 
-		nv50_graph_context_switch(dev);
+			nv50_graph_context_switch(dev);
 
-		status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH;
-	}
+			status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH;
+		}
 
-	if (status & 0x00100000) {
-		nouveau_pgraph_intr_error(dev, nsource |
-					  NV03_PGRAPH_NSOURCE_DATA_ERROR);
+		if (status & 0x00100000) {
+			nouveau_pgraph_intr_error(dev, nsource |
+					NV03_PGRAPH_NSOURCE_DATA_ERROR);
 
-		status &= ~0x00100000;
-		nv_wr32(dev, NV03_PGRAPH_INTR, 0x00100000);
-	}
+			status &= ~0x00100000;
+			nv_wr32(dev, NV03_PGRAPH_INTR, 0x00100000);
+		}
 
-	if (status & 0x00200000) {
-		int r;
+		if (status & 0x00200000) {
+			int r;
 
-		nouveau_pgraph_intr_error(dev, nsource |
-					  NV03_PGRAPH_NSOURCE_PROTECTION_ERROR);
+			nouveau_pgraph_intr_error(dev, nsource |
+					NV03_PGRAPH_NSOURCE_PROTECTION_ERROR);
 
-		NV_ERROR(dev, "magic set 1:\n");
-		for (r = 0x408900; r <= 0x408910; r += 4)
-			NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
-		nv_wr32(dev, 0x408900, nv_rd32(dev, 0x408904) | 0xc0000000);
-		for (r = 0x408e08; r <= 0x408e24; r += 4)
-			NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
-		nv_wr32(dev, 0x408e08, nv_rd32(dev, 0x408e08) | 0xc0000000);
+			NV_ERROR(dev, "magic set 1:\n");
+			for (r = 0x408900; r <= 0x408910; r += 4)
+				NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+					nv_rd32(dev, r));
+			nv_wr32(dev, 0x408900,
+				nv_rd32(dev, 0x408904) | 0xc0000000);
+			for (r = 0x408e08; r <= 0x408e24; r += 4)
+				NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+							nv_rd32(dev, r));
+			nv_wr32(dev, 0x408e08,
+				nv_rd32(dev, 0x408e08) | 0xc0000000);
 
-		NV_ERROR(dev, "magic set 2:\n");
-		for (r = 0x409900; r <= 0x409910; r += 4)
-			NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
-		nv_wr32(dev, 0x409900, nv_rd32(dev, 0x409904) | 0xc0000000);
-		for (r = 0x409e08; r <= 0x409e24; r += 4)
-			NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r, nv_rd32(dev, r));
-		nv_wr32(dev, 0x409e08, nv_rd32(dev, 0x409e08) | 0xc0000000);
+			NV_ERROR(dev, "magic set 2:\n");
+			for (r = 0x409900; r <= 0x409910; r += 4)
+				NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+					nv_rd32(dev, r));
+			nv_wr32(dev, 0x409900,
+				nv_rd32(dev, 0x409904) | 0xc0000000);
+			for (r = 0x409e08; r <= 0x409e24; r += 4)
+				NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+					nv_rd32(dev, r));
+			nv_wr32(dev, 0x409e08,
+				nv_rd32(dev, 0x409e08) | 0xc0000000);
 
-		status &= ~0x00200000;
-		nv_wr32(dev, NV03_PGRAPH_NSOURCE, nsource);
-		nv_wr32(dev, NV03_PGRAPH_INTR, 0x00200000);
-	}
+			status &= ~0x00200000;
+			nv_wr32(dev, NV03_PGRAPH_NSOURCE, nsource);
+			nv_wr32(dev, NV03_PGRAPH_INTR, 0x00200000);
+		}
 
-	if (status) {
-		NV_INFO(dev, "Unhandled PGRAPH_INTR - 0x%08x\n", status);
-		nv_wr32(dev, NV03_PGRAPH_INTR, status);
-	}
+		if (status) {
+			NV_INFO(dev, "Unhandled PGRAPH_INTR - 0x%08x\n",
+				status);
+			nv_wr32(dev, NV03_PGRAPH_INTR, status);
+		}
 
-	{
-		const int isb = (1 << 16) | (1 << 0);
+		{
+			const int isb = (1 << 16) | (1 << 0);
 
-		if ((nv_rd32(dev, 0x400500) & isb) != isb)
-			nv_wr32(dev, 0x400500, nv_rd32(dev, 0x400500) | isb);
-		nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
+			if ((nv_rd32(dev, 0x400500) & isb) != isb)
+				nv_wr32(dev, 0x400500,
+					nv_rd32(dev, 0x400500) | isb);
+		}
 	}
 
 	nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING);
+	nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
 }
 
 static void
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index fb9bdd6..2dc09db 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -285,53 +285,50 @@
 			uint32_t flags, uint64_t phys)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_gpuobj **pgt;
-	unsigned psz, pfl, pages;
+	struct nouveau_gpuobj *pgt;
+	unsigned block;
+	int i;
 
-	if (virt >= dev_priv->vm_gart_base &&
-	    (virt + size) < (dev_priv->vm_gart_base + dev_priv->vm_gart_size)) {
-		psz = 12;
-		pgt = &dev_priv->gart_info.sg_ctxdma;
-		pfl = 0x21;
-		virt -= dev_priv->vm_gart_base;
-	} else
-	if (virt >= dev_priv->vm_vram_base &&
-	    (virt + size) < (dev_priv->vm_vram_base + dev_priv->vm_vram_size)) {
-		psz = 16;
-		pgt = dev_priv->vm_vram_pt;
-		pfl = 0x01;
-		virt -= dev_priv->vm_vram_base;
-	} else {
-		NV_ERROR(dev, "Invalid address: 0x%16llx-0x%16llx\n",
-			 virt, virt + size - 1);
-		return -EINVAL;
+	virt = ((virt - dev_priv->vm_vram_base) >> 16) << 1;
+	size = (size >> 16) << 1;
+
+	phys |= ((uint64_t)flags << 32);
+	phys |= 1;
+	if (dev_priv->vram_sys_base) {
+		phys += dev_priv->vram_sys_base;
+		phys |= 0x30;
 	}
 
-	pages = size >> psz;
-
 	dev_priv->engine.instmem.prepare_access(dev, true);
-	if (flags & 0x80000000) {
-		while (pages--) {
-			struct nouveau_gpuobj *pt = pgt[virt >> 29];
-			unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1;
+	while (size) {
+		unsigned offset_h = upper_32_bits(phys);
+		unsigned offset_l = lower_32_bits(phys);
+		unsigned pte, end;
 
-			nv_wo32(dev, pt, pte++, 0x00000000);
-			nv_wo32(dev, pt, pte++, 0x00000000);
-
-			virt += (1 << psz);
+		for (i = 7; i >= 0; i--) {
+			block = 1 << (i + 1);
+			if (size >= block && !(virt & (block - 1)))
+				break;
 		}
-	} else {
-		while (pages--) {
-			struct nouveau_gpuobj *pt = pgt[virt >> 29];
-			unsigned pte = ((virt & 0x1fffffffULL) >> psz) << 1;
-			unsigned offset_h = upper_32_bits(phys) & 0xff;
-			unsigned offset_l = lower_32_bits(phys);
+		offset_l |= (i << 7);
 
-			nv_wo32(dev, pt, pte++, offset_l | pfl);
-			nv_wo32(dev, pt, pte++, offset_h | flags);
+		phys += block << 15;
+		size -= block;
 
-			phys += (1 << psz);
-			virt += (1 << psz);
+		while (block) {
+			pgt = dev_priv->vm_vram_pt[virt >> 14];
+			pte = virt & 0x3ffe;
+
+			end = pte + block;
+			if (end > 16384)
+				end = 16384;
+			block -= (end - pte);
+			virt  += (end - pte);
+
+			while (pte < end) {
+				nv_wo32(dev, pgt, pte++, offset_l);
+				nv_wo32(dev, pgt, pte++, offset_h);
+			}
 		}
 	}
 	dev_priv->engine.instmem.finish_access(dev);
@@ -356,7 +353,41 @@
 void
 nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size)
 {
-	nv50_mem_vm_bind_linear(dev, virt, size, 0x80000000, 0);
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_gpuobj *pgt;
+	unsigned pages, pte, end;
+
+	virt -= dev_priv->vm_vram_base;
+	pages = (size >> 16) << 1;
+
+	dev_priv->engine.instmem.prepare_access(dev, true);
+	while (pages) {
+		pgt = dev_priv->vm_vram_pt[virt >> 29];
+		pte = (virt & 0x1ffe0000ULL) >> 15;
+
+		end = pte + pages;
+		if (end > 16384)
+			end = 16384;
+		pages -= (end - pte);
+		virt  += (end - pte) << 15;
+
+		while (pte < end)
+			nv_wo32(dev, pgt, pte++, 0);
+	}
+	dev_priv->engine.instmem.finish_access(dev);
+
+	nv_wr32(dev, 0x100c80, 0x00050001);
+	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+		return;
+	}
+
+	nv_wr32(dev, 0x100c80, 0x00000001);
+	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+	}
 }
 
 /*
@@ -383,9 +414,8 @@
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
-	if (dev_priv->ttm.bdev.man[TTM_PL_PRIV0].has_type)
-		ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_PRIV0);
-	ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
+	nouveau_bo_unpin(dev_priv->vga_ram);
+	nouveau_bo_ref(NULL, &dev_priv->vga_ram);
 
 	ttm_bo_device_release(&dev_priv->ttm.bdev);
 
@@ -622,6 +652,15 @@
 		return ret;
 	}
 
+	ret = nouveau_bo_new(dev, NULL, 256*1024, 0, TTM_PL_FLAG_VRAM,
+			     0, 0, true, true, &dev_priv->vga_ram);
+	if (ret == 0)
+		ret = nouveau_bo_pin(dev_priv->vga_ram, TTM_PL_FLAG_VRAM);
+	if (ret) {
+		NV_WARN(dev, "failed to reserve VGA memory\n");
+		nouveau_bo_ref(NULL, &dev_priv->vga_ram);
+	}
+
 	/* GART */
 #if !defined(__powerpc__) && !defined(__ia64__)
 	if (drm_device_is_agp(dev) && dev->agp) {
@@ -653,6 +692,7 @@
 	dev_priv->fb_mtrr = drm_mtrr_add(drm_get_resource_start(dev, 1),
 					 drm_get_resource_len(dev, 1),
 					 DRM_MTRR_WC);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c
index 6c66a34..d99dc08 100644
--- a/drivers/gpu/drm/nouveau/nouveau_notifier.c
+++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c
@@ -34,15 +34,20 @@
 {
 	struct drm_device *dev = chan->dev;
 	struct nouveau_bo *ntfy = NULL;
+	uint32_t flags;
 	int ret;
 
-	ret = nouveau_gem_new(dev, NULL, PAGE_SIZE, 0, nouveau_vram_notify ?
-			      TTM_PL_FLAG_VRAM : TTM_PL_FLAG_TT,
+	if (nouveau_vram_notify)
+		flags = TTM_PL_FLAG_VRAM;
+	else
+		flags = TTM_PL_FLAG_TT;
+
+	ret = nouveau_gem_new(dev, NULL, PAGE_SIZE, 0, flags,
 			      0, 0x0000, false, true, &ntfy);
 	if (ret)
 		return ret;
 
-	ret = nouveau_bo_pin(ntfy, TTM_PL_FLAG_VRAM);
+	ret = nouveau_bo_pin(ntfy, flags);
 	if (ret)
 		goto out_err;
 
@@ -128,6 +133,8 @@
 			target = NV_DMA_TARGET_PCI;
 		} else {
 			target = NV_DMA_TARGET_AGP;
+			if (dev_priv->card_type >= NV_50)
+				offset += dev_priv->vm_gart_base;
 		}
 	} else {
 		NV_ERROR(dev, "Bad DMA target, mem_type %d!\n",
diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index 6c2cf817..e7c100b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -885,11 +885,12 @@
 nouveau_gpuobj_sw_new(struct nouveau_channel *chan, int class,
 		      struct nouveau_gpuobj **gpuobj_ret)
 {
-	struct drm_nouveau_private *dev_priv = chan->dev->dev_private;
+	struct drm_nouveau_private *dev_priv;
 	struct nouveau_gpuobj *gpuobj;
 
 	if (!chan || !gpuobj_ret || *gpuobj_ret != NULL)
 		return -EINVAL;
+	dev_priv = chan->dev->dev_private;
 
 	gpuobj = kzalloc(sizeof(*gpuobj), GFP_KERNEL);
 	if (!gpuobj)
diff --git a/drivers/gpu/drm/nouveau/nouveau_reg.h b/drivers/gpu/drm/nouveau/nouveau_reg.h
index 251f1b3..aa9b310 100644
--- a/drivers/gpu/drm/nouveau/nouveau_reg.h
+++ b/drivers/gpu/drm/nouveau/nouveau_reg.h
@@ -99,6 +99,7 @@
  * the card will hang early on in the X init process.
  */
 #    define NV_PMC_ENABLE_UNK13                               (1<<13)
+#define NV40_PMC_GRAPH_UNITS				   0x00001540
 #define NV40_PMC_BACKLIGHT				   0x000015f0
 #	define NV40_PMC_BACKLIGHT_MASK			   0x001f0000
 #define NV40_PMC_1700                                      0x00001700
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 4c7f1e4..ed15905 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -54,11 +54,12 @@
 nouveau_sgdma_clear(struct ttm_backend *be)
 {
 	struct nouveau_sgdma_be *nvbe = (struct nouveau_sgdma_be *)be;
-	struct drm_device *dev = nvbe->dev;
-
-	NV_DEBUG(nvbe->dev, "\n");
+	struct drm_device *dev;
 
 	if (nvbe && nvbe->pages) {
+		dev = nvbe->dev;
+		NV_DEBUG(dev, "\n");
+
 		if (nvbe->bound)
 			be->func->unbind(be);
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 09b9a46..a4851af 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -310,6 +310,14 @@
 static unsigned int
 nouveau_vga_set_decode(void *priv, bool state)
 {
+	struct drm_device *dev = priv;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->chipset >= 0x40)
+		nv_wr32(dev, 0x88054, state);
+	else
+		nv_wr32(dev, 0x1854, state);
+
 	if (state)
 		return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
 		       VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
@@ -427,15 +435,19 @@
 	if (ret)
 		goto out_timer;
 
-	/* PGRAPH */
-	ret = engine->graph.init(dev);
-	if (ret)
-		goto out_fb;
+	if (nouveau_noaccel)
+		engine->graph.accel_blocked = true;
+	else {
+		/* PGRAPH */
+		ret = engine->graph.init(dev);
+		if (ret)
+			goto out_fb;
 
-	/* PFIFO */
-	ret = engine->fifo.init(dev);
-	if (ret)
-		goto out_graph;
+		/* PFIFO */
+		ret = engine->fifo.init(dev);
+		if (ret)
+			goto out_graph;
+	}
 
 	/* this call irq_preinstall, register irq handler and
 	 * call irq_postinstall
@@ -479,9 +491,11 @@
 out_irq:
 	drm_irq_uninstall(dev);
 out_fifo:
-	engine->fifo.takedown(dev);
+	if (!nouveau_noaccel)
+		engine->fifo.takedown(dev);
 out_graph:
-	engine->graph.takedown(dev);
+	if (!nouveau_noaccel)
+		engine->graph.takedown(dev);
 out_fb:
 	engine->fb.takedown(dev);
 out_timer:
@@ -518,13 +532,16 @@
 			dev_priv->channel = NULL;
 		}
 
-		engine->fifo.takedown(dev);
-		engine->graph.takedown(dev);
+		if (!nouveau_noaccel) {
+			engine->fifo.takedown(dev);
+			engine->graph.takedown(dev);
+		}
 		engine->fb.takedown(dev);
 		engine->timer.takedown(dev);
 		engine->mc.takedown(dev);
 
 		mutex_lock(&dev->struct_mutex);
+		ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
 		ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);
 		mutex_unlock(&dev->struct_mutex);
 		nouveau_sgdma_takedown(dev);
@@ -816,6 +833,15 @@
 	case NOUVEAU_GETPARAM_VM_VRAM_BASE:
 		getparam->value = dev_priv->vm_vram_base;
 		break;
+	case NOUVEAU_GETPARAM_GRAPH_UNITS:
+		/* NV40 and NV50 versions are quite different, but register
+		 * address is the same. User is supposed to know the card
+		 * family anyway... */
+		if (dev_priv->chipset >= 0x40) {
+			getparam->value = nv_rd32(dev, NV40_PMC_GRAPH_UNITS);
+			break;
+		}
+		/* FALLTHRU */
 	default:
 		NV_ERROR(dev, "unknown parameter %lld\n", getparam->param);
 		return -EINVAL;
diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c
index d0e038d..1d73b15 100644
--- a/drivers/gpu/drm/nouveau/nv04_dac.c
+++ b/drivers/gpu/drm/nouveau/nv04_dac.c
@@ -119,7 +119,7 @@
 						 struct drm_connector *connector)
 {
 	struct drm_device *dev = encoder->dev;
-	uint8_t saved_seq1, saved_pi, saved_rpc1;
+	uint8_t saved_seq1, saved_pi, saved_rpc1, saved_cr_mode;
 	uint8_t saved_palette0[3], saved_palette_mask;
 	uint32_t saved_rtest_ctrl, saved_rgen_ctrl;
 	int i;
@@ -135,6 +135,9 @@
 		/* only implemented for head A for now */
 		NVSetOwner(dev, 0);
 
+	saved_cr_mode = NVReadVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX);
+	NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode | 0x80);
+
 	saved_seq1 = NVReadVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX);
 	NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1 & ~0x20);
 
@@ -203,6 +206,7 @@
 	NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_PIXEL_INDEX, saved_pi);
 	NVWriteVgaCrtc(dev, 0, NV_CIO_CRE_RPC1_INDEX, saved_rpc1);
 	NVWriteVgaSeq(dev, 0, NV_VIO_SR_CLOCK_INDEX, saved_seq1);
+	NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode);
 
 	if (blue == 0x18) {
 		NV_INFO(dev, "Load detected on head A\n");
diff --git a/drivers/gpu/drm/nouveau/nv04_fbcon.c b/drivers/gpu/drm/nouveau/nv04_fbcon.c
index d910873..fd01caa 100644
--- a/drivers/gpu/drm/nouveau/nv04_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nv04_fbcon.c
@@ -27,7 +27,7 @@
 #include "nouveau_dma.h"
 #include "nouveau_fbcon.h"
 
-static void
+void
 nv04_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region)
 {
 	struct nouveau_fbcon_par *par = info->par;
@@ -54,7 +54,7 @@
 	FIRE_RING(chan);
 }
 
-static void
+void
 nv04_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 {
 	struct nouveau_fbcon_par *par = info->par;
@@ -88,7 +88,7 @@
 	FIRE_RING(chan);
 }
 
-static void
+void
 nv04_fbcon_imageblit(struct fb_info *info, const struct fb_image *image)
 {
 	struct nouveau_fbcon_par *par = info->par;
@@ -307,9 +307,6 @@
 
 	FIRE_RING(chan);
 
-	info->fbops->fb_fillrect = nv04_fbcon_fillrect;
-	info->fbops->fb_copyarea = nv04_fbcon_copyarea;
-	info->fbops->fb_imageblit = nv04_fbcon_imageblit;
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv04_instmem.c b/drivers/gpu/drm/nouveau/nv04_instmem.c
index a20c206..a3b9563 100644
--- a/drivers/gpu/drm/nouveau/nv04_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv04_instmem.c
@@ -30,7 +30,7 @@
 		 * of vram.  For now, only reserve a small piece until we know
 		 * more about what each chipset requires.
 		 */
-		switch (dev_priv->chipset & 0xf0) {
+		switch (dev_priv->chipset) {
 		case 0x40:
 		case 0x47:
 		case 0x49:
diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c
index 58b917c..21ac6e4 100644
--- a/drivers/gpu/drm/nouveau/nv17_tv.c
+++ b/drivers/gpu/drm/nouveau/nv17_tv.c
@@ -579,6 +579,8 @@
 				nouveau_encoder(encoder)->restore.output);
 
 	nv17_tv_state_load(dev, &to_tv_enc(encoder)->saved_state);
+
+	nouveau_encoder(encoder)->last_dpms = NV_DPMS_CLEARED;
 }
 
 static int nv17_tv_create_resources(struct drm_encoder *encoder,
diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c
index 118d328..d1a651e 100644
--- a/drivers/gpu/drm/nouveau/nv50_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv50_crtc.c
@@ -298,14 +298,17 @@
 static void
 nv50_crtc_destroy(struct drm_crtc *crtc)
 {
-	struct drm_device *dev = crtc->dev;
-	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
-
-	NV_DEBUG_KMS(dev, "\n");
+	struct drm_device *dev;
+	struct nouveau_crtc *nv_crtc;
 
 	if (!crtc)
 		return;
 
+	dev = crtc->dev;
+	nv_crtc = nouveau_crtc(crtc);
+
+	NV_DEBUG_KMS(dev, "\n");
+
 	drm_crtc_cleanup(&nv_crtc->base);
 
 	nv50_cursor_fini(nv_crtc);
@@ -432,6 +435,7 @@
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct drm_encoder *encoder;
+	uint32_t dac = 0, sor = 0;
 
 	NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index);
 
@@ -439,9 +443,28 @@
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 
-		if (drm_helper_encoder_in_use(encoder))
+		if (!drm_helper_encoder_in_use(encoder))
 			continue;
 
+		if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
+		    nv_encoder->dcb->type == OUTPUT_TV)
+			dac |= (1 << nv_encoder->or);
+		else
+			sor |= (1 << nv_encoder->or);
+	}
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+		if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
+		    nv_encoder->dcb->type == OUTPUT_TV) {
+			if (dac & (1 << nv_encoder->or))
+				continue;
+		} else {
+			if (sor & (1 << nv_encoder->or))
+				continue;
+		}
+
 		nv_encoder->disconnect(nv_encoder);
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nv50_fbcon.c b/drivers/gpu/drm/nouveau/nv50_fbcon.c
index e4f279e..0f57cdf 100644
--- a/drivers/gpu/drm/nouveau/nv50_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nv50_fbcon.c
@@ -3,7 +3,7 @@
 #include "nouveau_dma.h"
 #include "nouveau_fbcon.h"
 
-static void
+void
 nv50_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 {
 	struct nouveau_fbcon_par *par = info->par;
@@ -46,7 +46,7 @@
 	FIRE_RING(chan);
 }
 
-static void
+void
 nv50_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *region)
 {
 	struct nouveau_fbcon_par *par = info->par;
@@ -81,7 +81,7 @@
 	FIRE_RING(chan);
 }
 
-static void
+void
 nv50_fbcon_imageblit(struct fb_info *info, const struct fb_image *image)
 {
 	struct nouveau_fbcon_par *par = info->par;
@@ -262,9 +262,6 @@
 	OUT_RING(chan, info->fix.smem_start - dev_priv->fb_phys +
 			 dev_priv->vm_vram_base);
 
-	info->fbops->fb_fillrect = nv50_fbcon_fillrect;
-	info->fbops->fb_copyarea = nv50_fbcon_copyarea;
-	info->fbops->fb_imageblit = nv50_fbcon_imageblit;
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c
index 39caf16..204a79f 100644
--- a/drivers/gpu/drm/nouveau/nv50_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv50_fifo.c
@@ -272,7 +272,7 @@
 			return ret;
 		ramfc = chan->ramfc->gpuobj;
 
-		ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 256,
+		ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, 4096, 1024,
 					     0, &chan->cache);
 		if (ret)
 			return ret;
@@ -317,17 +317,20 @@
 nv50_fifo_destroy_context(struct nouveau_channel *chan)
 {
 	struct drm_device *dev = chan->dev;
+	struct nouveau_gpuobj_ref *ramfc = chan->ramfc;
 
 	NV_DEBUG(dev, "ch%d\n", chan->id);
 
-	nouveau_gpuobj_ref_del(dev, &chan->ramfc);
-	nouveau_gpuobj_ref_del(dev, &chan->cache);
-
+	/* This will ensure the channel is seen as disabled. */
+	chan->ramfc = NULL;
 	nv50_fifo_channel_disable(dev, chan->id, false);
 
 	/* Dummy channel, also used on ch 127 */
 	if (chan->id == 0)
 		nv50_fifo_channel_disable(dev, 127, false);
+
+	nouveau_gpuobj_ref_del(dev, &ramfc);
+	nouveau_gpuobj_ref_del(dev, &chan->cache);
 }
 
 int
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index ca79f32..6d50480 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -84,7 +84,7 @@
 	nv_wr32(dev, 0x400804, 0xc0000000);
 	nv_wr32(dev, 0x406800, 0xc0000000);
 	nv_wr32(dev, 0x400c04, 0xc0000000);
-	nv_wr32(dev, 0x401804, 0xc0000000);
+	nv_wr32(dev, 0x401800, 0xc0000000);
 	nv_wr32(dev, 0x405018, 0xc0000000);
 	nv_wr32(dev, 0x402000, 0xc0000000);
 
@@ -165,6 +165,12 @@
 	uint32_t inst;
 	int i;
 
+	/* Be sure we're not in the middle of a context switch or bad things
+	 * will happen, such as unloading the wrong pgraph context.
+	 */
+	if (!nv_wait(0x400300, 0x00000001, 0x00000000))
+		NV_ERROR(dev, "Ctxprog is still running\n");
+
 	inst = nv_rd32(dev, NV50_PGRAPH_CTXCTL_CUR);
 	if (!(inst & NV50_PGRAPH_CTXCTL_CUR_LOADED))
 		return NULL;
@@ -275,19 +281,18 @@
 int
 nv50_graph_unload_context(struct drm_device *dev)
 {
-	uint32_t inst, fifo = nv_rd32(dev, 0x400500);
+	uint32_t inst;
 
 	inst  = nv_rd32(dev, NV50_PGRAPH_CTXCTL_CUR);
 	if (!(inst & NV50_PGRAPH_CTXCTL_CUR_LOADED))
 		return 0;
 	inst &= NV50_PGRAPH_CTXCTL_CUR_INSTANCE;
 
-	nv_wr32(dev, 0x400500, fifo & ~1);
+	nouveau_wait_for_idle(dev);
 	nv_wr32(dev, 0x400784, inst);
 	nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) | 0x20);
 	nv_wr32(dev, 0x400304, nv_rd32(dev, 0x400304) | 0x01);
 	nouveau_wait_for_idle(dev);
-	nv_wr32(dev, 0x400500, fifo);
 
 	nv_wr32(dev, NV50_PGRAPH_CTXCTL_CUR, inst);
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c
index 94400f7..f0dc4e3 100644
--- a/drivers/gpu/drm/nouveau/nv50_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv50_instmem.c
@@ -76,6 +76,11 @@
 	for (i = 0x1700; i <= 0x1710; i += 4)
 		priv->save1700[(i-0x1700)/4] = nv_rd32(dev, i);
 
+	if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
+		dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
+	else
+		dev_priv->vram_sys_base = 0;
+
 	/* Reserve the last MiB of VRAM, we should probably try to avoid
 	 * setting up the below tables over the top of the VBIOS image at
 	 * some point.
@@ -172,16 +177,28 @@
 	 * We map the entire fake channel into the start of the PRAMIN BAR
 	 */
 	ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pt_size, 0x1000,
-							0, &priv->pramin_pt);
+				     0, &priv->pramin_pt);
 	if (ret)
 		return ret;
 
-	for (i = 0, v = c_offset; i < pt_size; i += 8, v += 0x1000) {
-		if (v < (c_offset + c_size))
-			BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v | 1);
-		else
-			BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000009);
+	v = c_offset | 1;
+	if (dev_priv->vram_sys_base) {
+		v += dev_priv->vram_sys_base;
+		v |= 0x30;
+	}
+
+	i = 0;
+	while (v < dev_priv->vram_sys_base + c_offset + c_size) {
+		BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v);
 		BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
+		v += 0x1000;
+		i += 8;
+	}
+
+	while (i < pt_size) {
+		BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, 0x00000000);
+		BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
+		i += 8;
 	}
 
 	BAR0_WI32(chan->vm_pd, 0x00, priv->pramin_pt->instance | 0x63);
@@ -416,7 +433,9 @@
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv;
-	uint32_t pte, pte_end, vram;
+	struct nouveau_gpuobj *pramin_pt = priv->pramin_pt->gpuobj;
+	uint32_t pte, pte_end;
+	uint64_t vram;
 
 	if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound)
 		return -EINVAL;
@@ -424,20 +443,24 @@
 	NV_DEBUG(dev, "st=0x%0llx sz=0x%0llx\n",
 		 gpuobj->im_pramin->start, gpuobj->im_pramin->size);
 
-	pte     = (gpuobj->im_pramin->start >> 12) << 3;
-	pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
+	pte     = (gpuobj->im_pramin->start >> 12) << 1;
+	pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
 	vram    = gpuobj->im_backing_start;
 
 	NV_DEBUG(dev, "pramin=0x%llx, pte=%d, pte_end=%d\n",
 		 gpuobj->im_pramin->start, pte, pte_end);
 	NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start);
 
+	vram |= 1;
+	if (dev_priv->vram_sys_base) {
+		vram += dev_priv->vram_sys_base;
+		vram |= 0x30;
+	}
+
 	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (pte < pte_end) {
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, vram | 1);
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
-
-		pte += 8;
+		nv_wo32(dev, pramin_pt, pte++, lower_32_bits(vram));
+		nv_wo32(dev, pramin_pt, pte++, upper_32_bits(vram));
 		vram += NV50_INSTMEM_PAGE_SIZE;
 	}
 	dev_priv->engine.instmem.finish_access(dev);
@@ -470,14 +493,13 @@
 	if (gpuobj->im_bound == 0)
 		return -EINVAL;
 
-	pte     = (gpuobj->im_pramin->start >> 12) << 3;
-	pte_end = ((gpuobj->im_pramin->size >> 12) << 3) + pte;
+	pte     = (gpuobj->im_pramin->start >> 12) << 1;
+	pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
 
 	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (pte < pte_end) {
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 0)/4, 0x00000009);
-		nv_wo32(dev, priv->pramin_pt->gpuobj, (pte + 4)/4, 0x00000000);
-		pte += 8;
+		nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
+		nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
 	}
 	dev_priv->engine.instmem.finish_access(dev);
 
diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c
index e395c16..c2fff54 100644
--- a/drivers/gpu/drm/nouveau/nv50_sor.c
+++ b/drivers/gpu/drm/nouveau/nv50_sor.c
@@ -90,11 +90,25 @@
 {
 	struct drm_device *dev = encoder->dev;
 	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_encoder *enc;
 	uint32_t val;
 	int or = nv_encoder->or;
 
 	NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode);
 
+	nv_encoder->last_dpms = mode;
+	list_for_each_entry(enc, &dev->mode_config.encoder_list, head) {
+		struct nouveau_encoder *nvenc = nouveau_encoder(enc);
+
+		if (nvenc == nv_encoder ||
+		    nvenc->disconnect != nv50_sor_disconnect ||
+		    nvenc->dcb->or != nv_encoder->dcb->or)
+			continue;
+
+		if (nvenc->last_dpms == DRM_MODE_DPMS_ON)
+			return;
+	}
+
 	/* wait for it to be done */
 	if (!nv_wait(NV50_PDISPLAY_SOR_DPMS_CTRL(or),
 		     NV50_PDISPLAY_SOR_DPMS_CTRL_PENDING, 0)) {
diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
index 5982321..1c02d23 100644
--- a/drivers/gpu/drm/radeon/Kconfig
+++ b/drivers/gpu/drm/radeon/Kconfig
@@ -1,10 +1,14 @@
 config DRM_RADEON_KMS
-	bool "Enable modesetting on radeon by default"
+	bool "Enable modesetting on radeon by default - NEW DRIVER"
 	depends on DRM_RADEON
 	help
-	  Choose this option if you want kernel modesetting enabled by default,
-	  and you have a new enough userspace to support this. Running old
-	  userspaces with this enabled will cause pain.
+	  Choose this option if you want kernel modesetting enabled by default.
+
+	  This is a completely new driver. It's only part of the existing drm
+	  for compatibility reasons. It requires an entirely different graphics
+	  stack above it and works very differently from the old drm stack.
+	  i.e. don't enable this unless you know what you are doing it may
+	  cause issues or bugs compared to the previous userspace driver stack.
 
 	  When kernel modesetting is enabled the IOCTL of radeon/drm
 	  driver are considered as invalid and an error message is printed
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index 388140a7..7f152f6 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -24,6 +24,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <asm/unaligned.h>
 
 #define ATOM_DEBUG
 
@@ -212,7 +213,9 @@
 	case ATOM_ARG_PS:
 		idx = U8(*ptr);
 		(*ptr)++;
-		val = le32_to_cpu(ctx->ps[idx]);
+		/* get_unaligned_le32 avoids unaligned accesses from atombios
+		 * tables, noticed on a DEC Alpha. */
+		val = get_unaligned_le32((u32 *)&ctx->ps[idx]);
 		if (print)
 			DEBUG("PS[0x%02X,0x%04X]", idx, val);
 		break;
@@ -246,6 +249,9 @@
 		case ATOM_WS_ATTRIBUTES:
 			val = gctx->io_attr;
 			break;
+		case ATOM_WS_REGPTR:
+			val = gctx->reg_block;
+			break;
 		default:
 			val = ctx->ws[idx];
 		}
@@ -385,6 +391,32 @@
 	return atom_get_src_int(ctx, attr, ptr, NULL, 1);
 }
 
+static uint32_t atom_get_src_direct(atom_exec_context *ctx, uint8_t align, int *ptr)
+{
+	uint32_t val = 0xCDCDCDCD;
+
+	switch (align) {
+	case ATOM_SRC_DWORD:
+		val = U32(*ptr);
+		(*ptr) += 4;
+		break;
+	case ATOM_SRC_WORD0:
+	case ATOM_SRC_WORD8:
+	case ATOM_SRC_WORD16:
+		val = U16(*ptr);
+		(*ptr) += 2;
+		break;
+	case ATOM_SRC_BYTE0:
+	case ATOM_SRC_BYTE8:
+	case ATOM_SRC_BYTE16:
+	case ATOM_SRC_BYTE24:
+		val = U8(*ptr);
+		(*ptr)++;
+		break;
+	}
+	return val;
+}
+
 static uint32_t atom_get_dst(atom_exec_context *ctx, int arg, uint8_t attr,
 			     int *ptr, uint32_t *saved, int print)
 {
@@ -482,6 +514,9 @@
 		case ATOM_WS_ATTRIBUTES:
 			gctx->io_attr = val;
 			break;
+		case ATOM_WS_REGPTR:
+			gctx->reg_block = val;
+			break;
 		default:
 			ctx->ws[idx] = val;
 		}
@@ -608,7 +643,7 @@
 	uint8_t count = U8((*ptr)++);
 	SDEBUG("   count: %d\n", count);
 	if (arg == ATOM_UNIT_MICROSEC)
-		schedule_timeout_uninterruptible(usecs_to_jiffies(count));
+		udelay(count);
 	else
 		schedule_timeout_uninterruptible(msecs_to_jiffies(count));
 }
@@ -677,7 +712,7 @@
 	SDEBUG("   dst: ");
 	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
 	SDEBUG("   src1: ");
-	src1 = atom_get_src(ctx, attr, ptr);
+	src1 = atom_get_src_direct(ctx, ((attr >> 3) & 7), ptr);
 	SDEBUG("   src2: ");
 	src2 = atom_get_src(ctx, attr, ptr);
 	dst &= src1;
@@ -809,6 +844,38 @@
 	SDEBUG("   base: 0x%04X\n", ctx->ctx->reg_block);
 }
 
+static void atom_op_shift_left(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++), shift;
+	uint32_t saved, dst;
+	int dptr = *ptr;
+	attr &= 0x38;
+	attr |= atom_def_dst[attr >> 3] << 6;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr);
+	SDEBUG("   shift: %d\n", shift);
+	dst <<= shift;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
+static void atom_op_shift_right(atom_exec_context *ctx, int *ptr, int arg)
+{
+	uint8_t attr = U8((*ptr)++), shift;
+	uint32_t saved, dst;
+	int dptr = *ptr;
+	attr &= 0x38;
+	attr |= atom_def_dst[attr >> 3] << 6;
+	SDEBUG("   dst: ");
+	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+	shift = atom_get_src_direct(ctx, ATOM_SRC_BYTE0, ptr);
+	SDEBUG("   shift: %d\n", shift);
+	dst >>= shift;
+	SDEBUG("   dst: ");
+	atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
+}
+
 static void atom_op_shl(atom_exec_context *ctx, int *ptr, int arg)
 {
 	uint8_t attr = U8((*ptr)++), shift;
@@ -818,7 +885,7 @@
 	attr |= atom_def_dst[attr >> 3] << 6;
 	SDEBUG("   dst: ");
 	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
-	shift = U8((*ptr)++);
+	shift = atom_get_src(ctx, attr, ptr);
 	SDEBUG("   shift: %d\n", shift);
 	dst <<= shift;
 	SDEBUG("   dst: ");
@@ -834,7 +901,7 @@
 	attr |= atom_def_dst[attr >> 3] << 6;
 	SDEBUG("   dst: ");
 	dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
-	shift = U8((*ptr)++);
+	shift = atom_get_src(ctx, attr, ptr);
 	SDEBUG("   shift: %d\n", shift);
 	dst >>= shift;
 	SDEBUG("   dst: ");
@@ -937,18 +1004,18 @@
 	atom_op_or, ATOM_ARG_FB}, {
 	atom_op_or, ATOM_ARG_PLL}, {
 	atom_op_or, ATOM_ARG_MC}, {
-	atom_op_shl, ATOM_ARG_REG}, {
-	atom_op_shl, ATOM_ARG_PS}, {
-	atom_op_shl, ATOM_ARG_WS}, {
-	atom_op_shl, ATOM_ARG_FB}, {
-	atom_op_shl, ATOM_ARG_PLL}, {
-	atom_op_shl, ATOM_ARG_MC}, {
-	atom_op_shr, ATOM_ARG_REG}, {
-	atom_op_shr, ATOM_ARG_PS}, {
-	atom_op_shr, ATOM_ARG_WS}, {
-	atom_op_shr, ATOM_ARG_FB}, {
-	atom_op_shr, ATOM_ARG_PLL}, {
-	atom_op_shr, ATOM_ARG_MC}, {
+	atom_op_shift_left, ATOM_ARG_REG}, {
+	atom_op_shift_left, ATOM_ARG_PS}, {
+	atom_op_shift_left, ATOM_ARG_WS}, {
+	atom_op_shift_left, ATOM_ARG_FB}, {
+	atom_op_shift_left, ATOM_ARG_PLL}, {
+	atom_op_shift_left, ATOM_ARG_MC}, {
+	atom_op_shift_right, ATOM_ARG_REG}, {
+	atom_op_shift_right, ATOM_ARG_PS}, {
+	atom_op_shift_right, ATOM_ARG_WS}, {
+	atom_op_shift_right, ATOM_ARG_FB}, {
+	atom_op_shift_right, ATOM_ARG_PLL}, {
+	atom_op_shift_right, ATOM_ARG_MC}, {
 	atom_op_mul, ATOM_ARG_REG}, {
 	atom_op_mul, ATOM_ARG_PS}, {
 	atom_op_mul, ATOM_ARG_WS}, {
@@ -1058,8 +1125,6 @@
 
 	SDEBUG(">> execute %04X (len %d, WS %d, PS %d)\n", base, len, ws, ps);
 
-	/* reset reg block */
-	ctx->reg_block = 0;
 	ectx.ctx = ctx;
 	ectx.ps_shift = ps / 4;
 	ectx.start = base;
@@ -1096,6 +1161,12 @@
 void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
 {
 	mutex_lock(&ctx->mutex);
+	/* reset reg block */
+	ctx->reg_block = 0;
+	/* reset fb window */
+	ctx->fb_base = 0;
+	/* reset io mode */
+	ctx->io_mode = ATOM_IO_MM;
 	atom_execute_table_locked(ctx, index, params);
 	mutex_unlock(&ctx->mutex);
 }
diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h
index 47fd943..bc73781 100644
--- a/drivers/gpu/drm/radeon/atom.h
+++ b/drivers/gpu/drm/radeon/atom.h
@@ -91,6 +91,7 @@
 #define ATOM_WS_AND_MASK	0x45
 #define ATOM_WS_FB_WINDOW	0x46
 #define ATOM_WS_ATTRIBUTES	0x47
+#define ATOM_WS_REGPTR  	0x48
 
 #define ATOM_IIO_NOP		0
 #define ATOM_IIO_START		1
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 260fcf5..af464e35 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -307,7 +307,6 @@
 	args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
 	args.ucCRTC = radeon_crtc->crtc_id;
 
-	printk("executing set crtc dtd timing\n");
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
@@ -347,7 +346,6 @@
 	args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
 	args.ucCRTC = radeon_crtc->crtc_id;
 
-	printk("executing set crtc timing\n");
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
@@ -409,59 +407,57 @@
 	}
 }
 
-void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+union adjust_pixel_clock {
+	ADJUST_DISPLAY_PLL_PS_ALLOCATION v1;
+};
+
+static u32 atombios_adjust_pll(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct radeon_pll *pll)
 {
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_encoder *encoder = NULL;
 	struct radeon_encoder *radeon_encoder = NULL;
-	uint8_t frev, crev;
-	int index;
-	SET_PIXEL_CLOCK_PS_ALLOCATION args;
-	PIXEL_CLOCK_PARAMETERS *spc1_ptr;
-	PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr;
-	PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr;
-	uint32_t pll_clock = mode->clock;
-	uint32_t adjusted_clock;
-	uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
-	struct radeon_pll *pll;
-	int pll_flags = 0;
+	u32 adjusted_clock = mode->clock;
 
-	memset(&args, 0, sizeof(args));
+	/* reset the pll flags */
+	pll->flags = 0;
 
 	if (ASIC_IS_AVIVO(rdev)) {
 		if ((rdev->family == CHIP_RS600) ||
 		    (rdev->family == CHIP_RS690) ||
 		    (rdev->family == CHIP_RS740))
-			pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
-				      RADEON_PLL_PREFER_CLOSEST_LOWER);
+			pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+				       RADEON_PLL_PREFER_CLOSEST_LOWER);
 
 		if (ASIC_IS_DCE32(rdev) && mode->clock > 200000)	/* range limits??? */
-			pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+			pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
 		else
-			pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+			pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
 	} else {
-		pll_flags |= RADEON_PLL_LEGACY;
+		pll->flags |= RADEON_PLL_LEGACY;
 
 		if (mode->clock > 200000)	/* range limits??? */
-			pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+			pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
 		else
-			pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+			pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
 
 	}
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		if (encoder->crtc == crtc) {
-			if (!ASIC_IS_AVIVO(rdev)) {
-				if (encoder->encoder_type !=
-				    DRM_MODE_ENCODER_DAC)
-					pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
-				if (encoder->encoder_type ==
-					DRM_MODE_ENCODER_LVDS)
-					pll_flags |= RADEON_PLL_USE_REF_DIV;
-			}
 			radeon_encoder = to_radeon_encoder(encoder);
+			if (ASIC_IS_AVIVO(rdev)) {
+				/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
+				if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
+					adjusted_clock = mode->clock * 2;
+			} else {
+				if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
+					pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
+				if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS)
+					pll->flags |= RADEON_PLL_USE_REF_DIV;
+			}
 			break;
 		}
 	}
@@ -471,46 +467,101 @@
 	 * special hw requirements.
 	 */
 	if (ASIC_IS_DCE3(rdev)) {
-		ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args;
+		union adjust_pixel_clock args;
+		struct radeon_encoder_atom_dig *dig;
+		u8 frev, crev;
+		int index;
 
-		if (!encoder)
-			return;
-
-		memset(&adjust_pll_args, 0, sizeof(adjust_pll_args));
-		adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10);
-		adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id;
-		adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder);
+		if (!radeon_encoder->enc_priv)
+			return adjusted_clock;
+		dig = radeon_encoder->enc_priv;
 
 		index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll);
-		atom_execute_table(rdev->mode_info.atom_context,
-				   index, (uint32_t *)&adjust_pll_args);
-		adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10;
-	} else {
-		/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
-		if (ASIC_IS_AVIVO(rdev) &&
-		    (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1))
-			adjusted_clock = mode->clock * 2;
-		else
-			adjusted_clock = mode->clock;
+		atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+				      &crev);
+
+		memset(&args, 0, sizeof(args));
+
+		switch (frev) {
+		case 1:
+			switch (crev) {
+			case 1:
+			case 2:
+				args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
+				args.v1.ucTransmitterID = radeon_encoder->encoder_id;
+				args.v1.ucEncodeMode = atombios_get_encoder_mode(encoder);
+
+				atom_execute_table(rdev->mode_info.atom_context,
+						   index, (uint32_t *)&args);
+				adjusted_clock = le16_to_cpu(args.v1.usPixelClock) * 10;
+				break;
+			default:
+				DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+				return adjusted_clock;
+			}
+			break;
+		default:
+			DRM_ERROR("Unknown table version %d %d\n", frev, crev);
+			return adjusted_clock;
+		}
 	}
+	return adjusted_clock;
+}
+
+union set_pixel_clock {
+	SET_PIXEL_CLOCK_PS_ALLOCATION base;
+	PIXEL_CLOCK_PARAMETERS v1;
+	PIXEL_CLOCK_PARAMETERS_V2 v2;
+	PIXEL_CLOCK_PARAMETERS_V3 v3;
+};
+
+void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_encoder *encoder = NULL;
+	struct radeon_encoder *radeon_encoder = NULL;
+	u8 frev, crev;
+	int index;
+	union set_pixel_clock args;
+	u32 pll_clock = mode->clock;
+	u32 ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
+	struct radeon_pll *pll;
+	u32 adjusted_clock;
+
+	memset(&args, 0, sizeof(args));
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		if (encoder->crtc == crtc) {
+			radeon_encoder = to_radeon_encoder(encoder);
+			break;
+		}
+	}
+
+	if (!radeon_encoder)
+		return;
 
 	if (radeon_crtc->crtc_id == 0)
 		pll = &rdev->clock.p1pll;
 	else
 		pll = &rdev->clock.p2pll;
 
+	/* adjust pixel clock as needed */
+	adjusted_clock = atombios_adjust_pll(crtc, mode, pll);
+
 	if (ASIC_IS_AVIVO(rdev)) {
 		if (radeon_new_pll)
 			radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock,
 						 &fb_div, &frac_fb_div,
-						 &ref_div, &post_div, pll_flags);
+						 &ref_div, &post_div);
 		else
 			radeon_compute_pll(pll, adjusted_clock, &pll_clock,
 					   &fb_div, &frac_fb_div,
-					   &ref_div, &post_div, pll_flags);
+					   &ref_div, &post_div);
 	} else
 		radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
-				   &ref_div, &post_div, pll_flags);
+				   &ref_div, &post_div);
 
 	index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
 	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
@@ -520,45 +571,38 @@
 	case 1:
 		switch (crev) {
 		case 1:
-			spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput;
-			spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
-			spc1_ptr->usRefDiv = cpu_to_le16(ref_div);
-			spc1_ptr->usFbDiv = cpu_to_le16(fb_div);
-			spc1_ptr->ucFracFbDiv = frac_fb_div;
-			spc1_ptr->ucPostDiv = post_div;
-			spc1_ptr->ucPpll =
+			args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
+			args.v1.usRefDiv = cpu_to_le16(ref_div);
+			args.v1.usFbDiv = cpu_to_le16(fb_div);
+			args.v1.ucFracFbDiv = frac_fb_div;
+			args.v1.ucPostDiv = post_div;
+			args.v1.ucPpll =
 			    radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
-			spc1_ptr->ucCRTC = radeon_crtc->crtc_id;
-			spc1_ptr->ucRefDivSrc = 1;
+			args.v1.ucCRTC = radeon_crtc->crtc_id;
+			args.v1.ucRefDivSrc = 1;
 			break;
 		case 2:
-			spc2_ptr =
-			    (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput;
-			spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
-			spc2_ptr->usRefDiv = cpu_to_le16(ref_div);
-			spc2_ptr->usFbDiv = cpu_to_le16(fb_div);
-			spc2_ptr->ucFracFbDiv = frac_fb_div;
-			spc2_ptr->ucPostDiv = post_div;
-			spc2_ptr->ucPpll =
+			args.v2.usPixelClock = cpu_to_le16(mode->clock / 10);
+			args.v2.usRefDiv = cpu_to_le16(ref_div);
+			args.v2.usFbDiv = cpu_to_le16(fb_div);
+			args.v2.ucFracFbDiv = frac_fb_div;
+			args.v2.ucPostDiv = post_div;
+			args.v2.ucPpll =
 			    radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
-			spc2_ptr->ucCRTC = radeon_crtc->crtc_id;
-			spc2_ptr->ucRefDivSrc = 1;
+			args.v2.ucCRTC = radeon_crtc->crtc_id;
+			args.v2.ucRefDivSrc = 1;
 			break;
 		case 3:
-			if (!encoder)
-				return;
-			spc3_ptr =
-			    (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput;
-			spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
-			spc3_ptr->usRefDiv = cpu_to_le16(ref_div);
-			spc3_ptr->usFbDiv = cpu_to_le16(fb_div);
-			spc3_ptr->ucFracFbDiv = frac_fb_div;
-			spc3_ptr->ucPostDiv = post_div;
-			spc3_ptr->ucPpll =
+			args.v3.usPixelClock = cpu_to_le16(mode->clock / 10);
+			args.v3.usRefDiv = cpu_to_le16(ref_div);
+			args.v3.usFbDiv = cpu_to_le16(fb_div);
+			args.v3.ucFracFbDiv = frac_fb_div;
+			args.v3.ucPostDiv = post_div;
+			args.v3.ucPpll =
 			    radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
-			spc3_ptr->ucMiscInfo = (radeon_crtc->crtc_id << 2);
-			spc3_ptr->ucTransmitterId = radeon_encoder->encoder_id;
-			spc3_ptr->ucEncoderMode =
+			args.v3.ucMiscInfo = (radeon_crtc->crtc_id << 2);
+			args.v3.ucTransmitterId = radeon_encoder->encoder_id;
+			args.v3.ucEncoderMode =
 			    atombios_get_encoder_mode(encoder);
 			break;
 		default:
@@ -571,12 +615,11 @@
 		return;
 	}
 
-	printk("executing set pll\n");
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
-int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
-			   struct drm_framebuffer *old_fb)
+static int avivo_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+			       struct drm_framebuffer *old_fb)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
@@ -706,6 +749,42 @@
 	return 0;
 }
 
+int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
+			   struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (ASIC_IS_AVIVO(rdev))
+		return avivo_crtc_set_base(crtc, x, y, old_fb);
+	else
+		return radeon_crtc_set_base(crtc, x, y, old_fb);
+}
+
+/* properly set additional regs when using atombios */
+static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	u32 disp_merge_cntl;
+
+	switch (radeon_crtc->crtc_id) {
+	case 0:
+		disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
+		disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
+		WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
+		break;
+	case 1:
+		disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
+		disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
+		WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl);
+		WREG32(RADEON_FP_H2_SYNC_STRT_WID,   RREG32(RADEON_CRTC2_H_SYNC_STRT_WID));
+		WREG32(RADEON_FP_V2_SYNC_STRT_WID,   RREG32(RADEON_CRTC2_V_SYNC_STRT_WID));
+		break;
+	}
+}
+
 int atombios_crtc_mode_set(struct drm_crtc *crtc,
 			   struct drm_display_mode *mode,
 			   struct drm_display_mode *adjusted_mode,
@@ -727,8 +806,8 @@
 	else {
 		if (radeon_crtc->crtc_id == 0)
 			atombios_set_crtc_dtd_timing(crtc, adjusted_mode);
-		radeon_crtc_set_base(crtc, x, y, old_fb);
-		radeon_legacy_atom_set_surface(crtc);
+		atombios_crtc_set_base(crtc, x, y, old_fb);
+		radeon_legacy_atom_fixup(crtc);
 	}
 	atombios_overscan_setup(crtc, mode, adjusted_mode);
 	atombios_scaler_setup(crtc);
@@ -746,8 +825,8 @@
 
 static void atombios_crtc_prepare(struct drm_crtc *crtc)
 {
-	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
 	atombios_lock_crtc(crtc, 1);
+	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
 }
 
 static void atombios_crtc_commit(struct drm_crtc *crtc)
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 3eb0ca5..99915a6 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -332,11 +332,13 @@
 	PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION args;
 	int index = GetIndexIntoMasterTable(COMMAND, ProcessAuxChannelTransaction);
 	unsigned char *base;
+	int retry_count = 0;
 
 	memset(&args, 0, sizeof(args));
 
 	base = (unsigned char *)rdev->mode_info.atom_context->scratch;
 
+retry:
 	memcpy(base, req_bytes, num_bytes);
 
 	args.lpAuxRequest = 0;
@@ -347,10 +349,12 @@
 
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 
-	if (args.ucReplyStatus) {
-		DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x\n",
+	if (args.ucReplyStatus && !args.ucDataOutLen) {
+		if (args.ucReplyStatus == 0x20 && retry_count++ < 10)
+			goto retry;
+		DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n",
 			  req_bytes[1], req_bytes[0], req_bytes[2], req_bytes[3],
-			  chan->rec.i2c_id, args.ucReplyStatus);
+			  chan->rec.i2c_id, args.ucReplyStatus, retry_count);
 		return false;
 	}
 
@@ -468,7 +472,7 @@
 	struct radeon_connector *radeon_connector;
 	struct radeon_connector_atom_dig *dig_connector;
 
-	if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+	if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) &&
 	    (connector->connector_type != DRM_MODE_CONNECTOR_eDP))
 		return;
 
@@ -583,7 +587,7 @@
 	u8 train_set[4];
 	int i;
 
-	if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) ||
+	if ((connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) &&
 	    (connector->connector_type != DRM_MODE_CONNECTOR_eDP))
 		return;
 
@@ -596,21 +600,14 @@
 		return;
 	dig_connector = radeon_connector->con_priv;
 
-	if (ASIC_IS_DCE32(rdev)) {
-		if (dig->dig_block)
-			enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER;
-		else
-			enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER;
-		if (dig_connector->linkb)
-			enc_id |= ATOM_DP_CONFIG_LINK_B;
-		else
-			enc_id |= ATOM_DP_CONFIG_LINK_A;
-	} else {
-		if (dig_connector->linkb)
-			enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER | ATOM_DP_CONFIG_LINK_B;
-		else
-			enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER | ATOM_DP_CONFIG_LINK_A;
-	}
+	if (dig->dig_encoder)
+		enc_id |= ATOM_DP_CONFIG_DIG2_ENCODER;
+	else
+		enc_id |= ATOM_DP_CONFIG_DIG1_ENCODER;
+	if (dig_connector->linkb)
+		enc_id |= ATOM_DP_CONFIG_LINK_B;
+	else
+		enc_id |= ATOM_DP_CONFIG_LINK_A;
 
 	memset(link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
 	if (dig_connector->dp_clock == 270000)
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 8760d66..c0d4650 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -354,11 +354,17 @@
 		return RREG32(RADEON_CRTC2_CRNT_FRAME);
 }
 
+/* Who ever call radeon_fence_emit should call ring_lock and ask
+ * for enough space (today caller are ib schedule and buffer move) */
 void r100_fence_ring_emit(struct radeon_device *rdev,
 			  struct radeon_fence *fence)
 {
-	/* Who ever call radeon_fence_emit should call ring_lock and ask
-	 * for enough space (today caller are ib schedule and buffer move) */
+	/* We have to make sure that caches are flushed before
+	 * CPU might read something from VRAM. */
+	radeon_ring_write(rdev, PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, RADEON_RB3D_DC_FLUSH_ALL);
+	radeon_ring_write(rdev, PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, RADEON_RB3D_ZC_FLUSH_ALL);
 	/* Wait until IDLE & CLEAN */
 	radeon_ring_write(rdev, PACKET0(0x1720, 0));
 	radeon_ring_write(rdev, (1 << 16) | (1 << 17));
@@ -1504,6 +1510,7 @@
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
+		track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 0));
 		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
@@ -3368,7 +3375,6 @@
 
 void r100_fini(struct radeon_device *rdev)
 {
-	r100_suspend(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -3399,9 +3405,7 @@
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+			radeon_agp_disable(rdev);
 		} else {
 			rdev->mc.gtt_location = rdev->mc.agp_base;
 		}
@@ -3482,13 +3486,12 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		r100_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
+		radeon_irq_kms_fini(rdev);
 		if (rdev->flags & RADEON_IS_PCI)
 			r100_pci_gart_fini(rdev);
-		radeon_irq_kms_fini(rdev);
 		rdev->accel_working = false;
 	}
 	return 0;
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 2094212..ff1e0cd 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -371,13 +371,16 @@
 		case 5:
 		case 6:
 		case 7:
+			/* 1D/2D */
 			track->textures[i].tex_coord_type = 0;
 			break;
 		case 1:
-			track->textures[i].tex_coord_type = 1;
+			/* CUBE */
+			track->textures[i].tex_coord_type = 2;
 			break;
 		case 2:
-			track->textures[i].tex_coord_type = 2;
+			/* 3D */
+			track->textures[i].tex_coord_type = 1;
 			break;
 		}
 		break;
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 0051d11..43b55a0 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -506,11 +506,14 @@
 
 	/* DDR for all card after R300 & IGP */
 	rdev->mc.vram_is_ddr = true;
+
 	tmp = RREG32(RADEON_MEM_CNTL);
-	if (tmp & R300_MEM_NUM_CHANNELS_MASK) {
-		rdev->mc.vram_width = 128;
-	} else {
-		rdev->mc.vram_width = 64;
+	tmp &= R300_MEM_NUM_CHANNELS_MASK;
+	switch (tmp) {
+	case 0: rdev->mc.vram_width = 64; break;
+	case 1: rdev->mc.vram_width = 128; break;
+	case 2: rdev->mc.vram_width = 256; break;
+	default:  rdev->mc.vram_width = 128; break;
 	}
 
 	r100_vram_init_sizes(rdev);
@@ -1327,7 +1330,6 @@
 
 void r300_fini(struct radeon_device *rdev)
 {
-	r300_suspend(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -1418,15 +1420,15 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		r300_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
+		radeon_irq_kms_fini(rdev);
 		if (rdev->flags & RADEON_IS_PCIE)
 			rv370_pcie_gart_fini(rdev);
 		if (rdev->flags & RADEON_IS_PCI)
 			r100_pci_gart_fini(rdev);
-		radeon_irq_kms_fini(rdev);
+		radeon_agp_fini(rdev);
 		rdev->accel_working = false;
 	}
 	return 0;
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 053404e..d937324 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -50,9 +50,7 @@
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+			radeon_agp_disable(rdev);
 		} else {
 			rdev->mc.gtt_location = rdev->mc.agp_base;
 		}
@@ -391,16 +389,15 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		r420_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
+		radeon_irq_kms_fini(rdev);
 		if (rdev->flags & RADEON_IS_PCIE)
 			rv370_pcie_gart_fini(rdev);
 		if (rdev->flags & RADEON_IS_PCI)
 			r100_pci_gart_fini(rdev);
 		radeon_agp_fini(rdev);
-		radeon_irq_kms_fini(rdev);
 		rdev->accel_working = false;
 	}
 	return 0;
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 9a18907..ddf5731 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -294,13 +294,12 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		rv515_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
+		radeon_irq_kms_fini(rdev);
 		rv370_pcie_gart_fini(rdev);
 		radeon_agp_fini(rdev);
-		radeon_irq_kms_fini(rdev);
 		rdev->accel_working = false;
 	}
 	return 0;
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c065199..2ffcf5a 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -624,7 +624,6 @@
 	fixed20_12 a;
 	u32 tmp;
 	int chansize, numchan;
-	int r;
 
 	/* Get VRAM informations */
 	rdev->mc.vram_is_ddr = true;
@@ -667,9 +666,6 @@
 		rdev->mc.real_vram_size = rdev->mc.aper_size;
 
 	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r)
-			return r;
 		/* gtt_size is setup by radeon_agp_init */
 		rdev->mc.gtt_location = rdev->mc.agp_base;
 		tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size;
@@ -1658,6 +1654,12 @@
 	rdev->cp.align_mask = 16 - 1;
 }
 
+void r600_cp_fini(struct radeon_device *rdev)
+{
+	r600_cp_stop(rdev);
+	radeon_ring_fini(rdev);
+}
+
 
 /*
  * GPU scratch registers helpers function.
@@ -1792,23 +1794,24 @@
 	radeon_ring_write(rdev, RB_INT_STAT);
 }
 
-int r600_copy_dma(struct radeon_device *rdev,
-		  uint64_t src_offset,
-		  uint64_t dst_offset,
-		  unsigned num_pages,
-		  struct radeon_fence *fence)
-{
-	/* FIXME: implement */
-	return 0;
-}
-
 int r600_copy_blit(struct radeon_device *rdev,
 		   uint64_t src_offset, uint64_t dst_offset,
 		   unsigned num_pages, struct radeon_fence *fence)
 {
-	r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+	int r;
+
+	mutex_lock(&rdev->r600_blit.mutex);
+	rdev->r600_blit.vb_ib = NULL;
+	r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+	if (r) {
+		if (rdev->r600_blit.vb_ib)
+			radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
+		mutex_unlock(&rdev->r600_blit.mutex);
+		return r;
+	}
 	r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
 	r600_blit_done_copy(rdev, fence);
+	mutex_unlock(&rdev->r600_blit.mutex);
 	return 0;
 }
 
@@ -1864,26 +1867,25 @@
 			return r;
 	}
 	r600_gpu_init(rdev);
-
-	if (!rdev->r600_blit.shader_obj) {
-		r = r600_blit_init(rdev);
+	r = r600_blit_init(rdev);
+	if (r) {
+		r600_blit_fini(rdev);
+		rdev->asic->copy = NULL;
+		dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
+	}
+	/* pin copy shader into vram */
+	if (rdev->r600_blit.shader_obj) {
+		r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+		if (unlikely(r != 0))
+			return r;
+		r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
+				&rdev->r600_blit.shader_gpu_addr);
+		radeon_bo_unreserve(rdev->r600_blit.shader_obj);
 		if (r) {
-			DRM_ERROR("radeon: failed blitter (%d).\n", r);
+			dev_err(rdev->dev, "(%d) pin blit object failed\n", r);
 			return r;
 		}
 	}
-
-	r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
-	if (unlikely(r != 0))
-		return r;
-	r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
-			&rdev->r600_blit.shader_gpu_addr);
-	radeon_bo_unreserve(rdev->r600_blit.shader_obj);
-	if (r) {
-		dev_err(rdev->dev, "(%d) pin blit object failed\n", r);
-		return r;
-	}
-
 	/* Enable IRQ */
 	r = r600_irq_init(rdev);
 	if (r) {
@@ -1948,6 +1950,13 @@
 		DRM_ERROR("radeon: failled testing IB (%d).\n", r);
 		return r;
 	}
+
+	r = r600_audio_init(rdev);
+	if (r) {
+		DRM_ERROR("radeon: audio resume failed\n");
+		return r;
+	}
+
 	return r;
 }
 
@@ -1955,17 +1964,21 @@
 {
 	int r;
 
+	r600_audio_fini(rdev);
 	/* FIXME: we should wait for ring to be empty */
 	r600_cp_stop(rdev);
 	rdev->cp.ready = false;
+	r600_irq_suspend(rdev);
 	r600_wb_disable(rdev);
 	r600_pcie_gart_disable(rdev);
 	/* unpin shaders bo */
-	r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
-	if (unlikely(r != 0))
-		return r;
-	radeon_bo_unpin(rdev->r600_blit.shader_obj);
-	radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+	if (rdev->r600_blit.shader_obj) {
+		r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+		if (!r) {
+			radeon_bo_unpin(rdev->r600_blit.shader_obj);
+			radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+		}
+	}
 	return 0;
 }
 
@@ -2026,6 +2039,11 @@
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r)
+			radeon_agp_disable(rdev);
+	}
 	r = r600_mc_init(rdev);
 	if (r)
 		return r;
@@ -2051,22 +2069,25 @@
 	rdev->accel_working = true;
 	r = r600_startup(rdev);
 	if (r) {
-		r600_suspend(rdev);
+		dev_err(rdev->dev, "disabling GPU acceleration\n");
+		r600_cp_fini(rdev);
 		r600_wb_fini(rdev);
-		radeon_ring_fini(rdev);
+		r600_irq_fini(rdev);
+		radeon_irq_kms_fini(rdev);
 		r600_pcie_gart_fini(rdev);
 		rdev->accel_working = false;
 	}
 	if (rdev->accel_working) {
 		r = radeon_ib_pool_init(rdev);
 		if (r) {
-			DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r);
+			dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
 			rdev->accel_working = false;
-		}
-		r = r600_ib_test(rdev);
-		if (r) {
-			DRM_ERROR("radeon: failed testing IB (%d).\n", r);
-			rdev->accel_working = false;
+		} else {
+			r = r600_ib_test(rdev);
+			if (r) {
+				dev_err(rdev->dev, "IB test failed (%d).\n", r);
+				rdev->accel_working = false;
+			}
 		}
 	}
 
@@ -2078,20 +2099,17 @@
 
 void r600_fini(struct radeon_device *rdev)
 {
-	/* Suspend operations */
-	r600_suspend(rdev);
-
 	r600_audio_fini(rdev);
 	r600_blit_fini(rdev);
+	r600_cp_fini(rdev);
+	r600_wb_fini(rdev);
 	r600_irq_fini(rdev);
 	radeon_irq_kms_fini(rdev);
-	radeon_ring_fini(rdev);
-	r600_wb_fini(rdev);
 	r600_pcie_gart_fini(rdev);
+	radeon_agp_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
 	radeon_clocks_fini(rdev);
-	radeon_agp_fini(rdev);
 	radeon_bo_fini(rdev);
 	radeon_atombios_fini(rdev);
 	kfree(rdev->bios);
@@ -2197,14 +2215,14 @@
 	rb_bufsz = drm_order(ring_size / 4);
 	ring_size = (1 << rb_bufsz) * 4;
 	rdev->ih.ring_size = ring_size;
-	rdev->ih.align_mask = 4 - 1;
+	rdev->ih.ptr_mask = rdev->ih.ring_size - 1;
+	rdev->ih.rptr = 0;
 }
 
-static int r600_ih_ring_alloc(struct radeon_device *rdev, unsigned ring_size)
+static int r600_ih_ring_alloc(struct radeon_device *rdev)
 {
 	int r;
 
-	rdev->ih.ring_size = ring_size;
 	/* Allocate ring buffer */
 	if (rdev->ih.ring_obj == NULL) {
 		r = radeon_bo_create(rdev, NULL, rdev->ih.ring_size,
@@ -2234,9 +2252,6 @@
 			return r;
 		}
 	}
-	rdev->ih.ptr_mask = (rdev->cp.ring_size / 4) - 1;
-	rdev->ih.rptr = 0;
-
 	return 0;
 }
 
@@ -2386,7 +2401,7 @@
 	u32 interrupt_cntl, ih_cntl, ih_rb_cntl;
 
 	/* allocate ring */
-	ret = r600_ih_ring_alloc(rdev, rdev->ih.ring_size);
+	ret = r600_ih_ring_alloc(rdev);
 	if (ret)
 		return ret;
 
@@ -2449,10 +2464,15 @@
 	return ret;
 }
 
-void r600_irq_fini(struct radeon_device *rdev)
+void r600_irq_suspend(struct radeon_device *rdev)
 {
 	r600_disable_interrupts(rdev);
 	r600_rlc_stop(rdev);
+}
+
+void r600_irq_fini(struct radeon_device *rdev)
+{
+	r600_irq_suspend(rdev);
 	r600_ih_ring_fini(rdev);
 }
 
@@ -2467,8 +2487,12 @@
 		return -EINVAL;
 	}
 	/* don't enable anything if the ih is disabled */
-	if (!rdev->ih.enabled)
+	if (!rdev->ih.enabled) {
+		r600_disable_interrupts(rdev);
+		/* force the active interrupt state to all disabled */
+		r600_disable_interrupt_state(rdev);
 		return 0;
+	}
 
 	if (ASIC_IS_DCE3(rdev)) {
 		hpd1 = RREG32(DC_HPD1_INT_CONTROL) & ~DC_HPDx_INT_EN;
@@ -2638,16 +2662,18 @@
 	wptr = RREG32(IH_RB_WPTR);
 
 	if (wptr & RB_OVERFLOW) {
-		WARN_ON(1);
-		/* XXX deal with overflow */
-		DRM_ERROR("IH RB overflow\n");
+		/* When a ring buffer overflow happen start parsing interrupt
+		 * from the last not overwritten vector (wptr + 16). Hopefully
+		 * this should allow us to catchup.
+		 */
+		dev_warn(rdev->dev, "IH ring buffer overflow (0x%08X, %d, %d)\n",
+			wptr, rdev->ih.rptr, (wptr + 16) + rdev->ih.ptr_mask);
+		rdev->ih.rptr = (wptr + 16) & rdev->ih.ptr_mask;
 		tmp = RREG32(IH_RB_CNTL);
 		tmp |= IH_WPTR_OVERFLOW_CLEAR;
 		WREG32(IH_RB_CNTL, tmp);
 	}
-	wptr = wptr & WPTR_OFFSET_MASK;
-
-	return wptr;
+	return (wptr & rdev->ih.ptr_mask);
 }
 
 /*        r600 IV Ring
@@ -2683,12 +2709,13 @@
 	u32 wptr = r600_get_ih_wptr(rdev);
 	u32 rptr = rdev->ih.rptr;
 	u32 src_id, src_data;
-	u32 last_entry = rdev->ih.ring_size - 16;
 	u32 ring_index, disp_int, disp_int_cont, disp_int_cont2;
 	unsigned long flags;
 	bool queue_hotplug = false;
 
 	DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+	if (!rdev->ih.enabled)
+		return IRQ_NONE;
 
 	spin_lock_irqsave(&rdev->ih.lock, flags);
 
@@ -2729,7 +2756,7 @@
 				}
 				break;
 			default:
-				DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+				DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
 				break;
 			}
 			break;
@@ -2749,7 +2776,7 @@
 				}
 				break;
 			default:
-				DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+				DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
 				break;
 			}
 			break;
@@ -2798,7 +2825,7 @@
 				}
 				break;
 			default:
-				DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+				DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
 				break;
 			}
 			break;
@@ -2812,15 +2839,13 @@
 			DRM_DEBUG("IH: CP EOP\n");
 			break;
 		default:
-			DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data);
+			DRM_DEBUG("Unhandled interrupt: %d %d\n", src_id, src_data);
 			break;
 		}
 
 		/* wptr/rptr are in bytes! */
-		if (rptr == last_entry)
-			rptr = 0;
-		else
-			rptr += 16;
+		rptr += 16;
+		rptr &= rdev->ih.ptr_mask;
 	}
 	/* make sure wptr hasn't changed while processing */
 	wptr = r600_get_ih_wptr(rdev);
@@ -2888,3 +2913,18 @@
 	return 0;
 #endif
 }
+
+/**
+ * r600_ioctl_wait_idle - flush host path cache on wait idle ioctl
+ * rdev: radeon device structure
+ * bo: buffer object struct which userspace is waiting for idle
+ *
+ * Some R6XX/R7XX doesn't seems to take into account HDP flush performed
+ * through ring buffer, this leads to corruption in rendering, see
+ * http://bugzilla.kernel.org/show_bug.cgi?id=15186 to avoid this we
+ * directly perform HDP flush by writing register through MMIO.
+ */
+void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
+{
+	WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
+}
diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c
index 99e2c38..0dcb690 100644
--- a/drivers/gpu/drm/radeon/r600_audio.c
+++ b/drivers/gpu/drm/radeon/r600_audio.c
@@ -35,7 +35,7 @@
  */
 static int r600_audio_chipset_supported(struct radeon_device *rdev)
 {
-	return rdev->family >= CHIP_R600
+	return (rdev->family >= CHIP_R600 && rdev->family < CHIP_RV710)
 		|| rdev->family == CHIP_RS600
 		|| rdev->family == CHIP_RS690
 		|| rdev->family == CHIP_RS740;
@@ -261,7 +261,6 @@
 	if (!r600_audio_chipset_supported(rdev))
 		return;
 
-	WREG32_P(R600_AUDIO_ENABLE, 0x0, ~0x81000000);
-
 	del_timer(&rdev->audio_timer);
+	WREG32_P(R600_AUDIO_ENABLE, 0x0, ~0x81000000);
 }
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 8787ea8..446b765 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -449,6 +449,7 @@
 	u32 packet2s[16];
 	int num_packet2s = 0;
 
+	mutex_init(&rdev->r600_blit.mutex);
 	rdev->r600_blit.state_offset = 0;
 
 	if (rdev->family >= CHIP_RV770)
@@ -512,14 +513,16 @@
 {
 	int r;
 
+	if (rdev->r600_blit.shader_obj == NULL)
+		return;
+	/* If we can't reserve the bo, unref should be enough to destroy
+	 * it when it becomes idle.
+	 */
 	r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
-	if (unlikely(r != 0)) {
-		dev_err(rdev->dev, "(%d) can't finish r600 blit\n", r);
-		goto out_unref;
+	if (!r) {
+		radeon_bo_unpin(rdev->r600_blit.shader_obj);
+		radeon_bo_unreserve(rdev->r600_blit.shader_obj);
 	}
-	radeon_bo_unpin(rdev->r600_blit.shader_obj);
-	radeon_bo_unreserve(rdev->r600_blit.shader_obj);
-out_unref:
 	radeon_bo_unref(&rdev->r600_blit.shader_obj);
 }
 
@@ -540,9 +543,6 @@
 void r600_vb_ib_put(struct radeon_device *rdev)
 {
 	radeon_fence_emit(rdev, rdev->r600_blit.vb_ib->fence);
-	mutex_lock(&rdev->ib_pool.mutex);
-	list_add_tail(&rdev->r600_blit.vb_ib->list, &rdev->ib_pool.scheduled_ibs);
-	mutex_unlock(&rdev->ib_pool.mutex);
 	radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
 }
 
@@ -555,7 +555,8 @@
 	int dwords_per_loop = 76, num_loops;
 
 	r = r600_vb_ib_get(rdev);
-	WARN_ON(r);
+	if (r)
+		return r;
 
 	/* set_render_target emits 2 extra dwords on rv6xx */
 	if (rdev->family > CHIP_R600 && rdev->family < CHIP_RV770)
@@ -581,7 +582,8 @@
 	ring_size += 5; /* done copy */
 	ring_size += 7; /* fence emit for done copy */
 	r = radeon_ring_lock(rdev, ring_size);
-	WARN_ON(r);
+	if (r)
+		return r;
 
 	set_default_state(rdev); /* 14 */
 	set_shaders(rdev); /* 26 */
diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c
index 6d5a711..75bcf35 100644
--- a/drivers/gpu/drm/radeon/r600_cp.c
+++ b/drivers/gpu/drm/radeon/r600_cp.c
@@ -1428,9 +1428,12 @@
 
 	gb_tiling_config |= R600_BANK_SWAPS(1);
 
-	backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes,
-							dev_priv->r600_max_backends,
-							(0xff << dev_priv->r600_max_backends) & 0xff);
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV740)
+		backend_map = 0x28;
+	else
+		backend_map = r700_get_tile_pipe_to_backend_map(dev_priv->r600_max_tile_pipes,
+								dev_priv->r600_max_backends,
+								(0xff << dev_priv->r600_max_backends) & 0xff);
 	gb_tiling_config |= R600_BACKEND_MAP(backend_map);
 
 	cc_gc_shader_pipe_config =
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 44060b9..e4c45ec 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -36,6 +36,10 @@
 typedef int (*next_reloc_t)(struct radeon_cs_parser*, struct radeon_cs_reloc**);
 static next_reloc_t r600_cs_packet_next_reloc = &r600_cs_packet_next_reloc_mm;
 
+struct r600_cs_track {
+	u32	cb_color0_base_last;
+};
+
 /**
  * r600_cs_packet_parse() - parse cp packet and point ib index to next packet
  * @parser:	parser structure holding parsing context.
@@ -177,6 +181,28 @@
 }
 
 /**
+ * r600_cs_packet_next_is_pkt3_nop() - test if next packet is packet3 nop for reloc
+ * @parser:		parser structure holding parsing context.
+ *
+ * Check next packet is relocation packet3, do bo validation and compute
+ * GPU offset using the provided start.
+ **/
+static inline int r600_cs_packet_next_is_pkt3_nop(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_packet p3reloc;
+	int r;
+
+	r = r600_cs_packet_parse(p, &p3reloc, p->idx);
+	if (r) {
+		return 0;
+	}
+	if (p3reloc.type != PACKET_TYPE3 || p3reloc.opcode != PACKET3_NOP) {
+		return 0;
+	}
+	return 1;
+}
+
+/**
  * r600_cs_packet_next_vline() - parse userspace VLINE packet
  * @parser:		parser structure holding parsing context.
  *
@@ -337,6 +363,7 @@
 				struct radeon_cs_packet *pkt)
 {
 	struct radeon_cs_reloc *reloc;
+	struct r600_cs_track *track;
 	volatile u32 *ib;
 	unsigned idx;
 	unsigned i;
@@ -344,6 +371,7 @@
 	int r;
 	u32 idx_value;
 
+	track = (struct r600_cs_track *)p->track;
 	ib = p->ib->ptr;
 	idx = pkt->idx + 1;
 	idx_value = radeon_get_ib_value(p, idx);
@@ -503,9 +531,60 @@
 		for (i = 0; i < pkt->count; i++) {
 			reg = start_reg + (4 * i);
 			switch (reg) {
+			/* This register were added late, there is userspace
+			 * which does provide relocation for those but set
+			 * 0 offset. In order to avoid breaking old userspace
+			 * we detect this and set address to point to last
+			 * CB_COLOR0_BASE, note that if userspace doesn't set
+			 * CB_COLOR0_BASE before this register we will report
+			 * error. Old userspace always set CB_COLOR0_BASE
+			 * before any of this.
+			 */
+			case R_0280E0_CB_COLOR0_FRAG:
+			case R_0280E4_CB_COLOR1_FRAG:
+			case R_0280E8_CB_COLOR2_FRAG:
+			case R_0280EC_CB_COLOR3_FRAG:
+			case R_0280F0_CB_COLOR4_FRAG:
+			case R_0280F4_CB_COLOR5_FRAG:
+			case R_0280F8_CB_COLOR6_FRAG:
+			case R_0280FC_CB_COLOR7_FRAG:
+			case R_0280C0_CB_COLOR0_TILE:
+			case R_0280C4_CB_COLOR1_TILE:
+			case R_0280C8_CB_COLOR2_TILE:
+			case R_0280CC_CB_COLOR3_TILE:
+			case R_0280D0_CB_COLOR4_TILE:
+			case R_0280D4_CB_COLOR5_TILE:
+			case R_0280D8_CB_COLOR6_TILE:
+			case R_0280DC_CB_COLOR7_TILE:
+				if (!r600_cs_packet_next_is_pkt3_nop(p)) {
+					if (!track->cb_color0_base_last) {
+						dev_err(p->dev, "Broken old userspace ? no cb_color0_base supplied before trying to write 0x%08X\n", reg);
+						return -EINVAL;
+					}
+					ib[idx+1+i] = track->cb_color0_base_last;
+					printk_once(KERN_WARNING "radeon: You have old & broken userspace "
+						"please consider updating mesa & xf86-video-ati\n");
+				} else {
+					r = r600_cs_packet_next_reloc(p, &reloc);
+					if (r) {
+						dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+						return -EINVAL;
+					}
+					ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+				}
+				break;
 			case DB_DEPTH_BASE:
 			case DB_HTILE_DATA_BASE:
 			case CB_COLOR0_BASE:
+				r = r600_cs_packet_next_reloc(p, &reloc);
+				if (r) {
+					DRM_ERROR("bad SET_CONTEXT_REG "
+							"0x%04X\n", reg);
+					return -EINVAL;
+				}
+				ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+				track->cb_color0_base_last = ib[idx+1+i];
+				break;
 			case CB_COLOR1_BASE:
 			case CB_COLOR2_BASE:
 			case CB_COLOR3_BASE:
@@ -678,8 +757,11 @@
 int r600_cs_parse(struct radeon_cs_parser *p)
 {
 	struct radeon_cs_packet pkt;
+	struct r600_cs_track *track;
 	int r;
 
+	track = kzalloc(sizeof(*track), GFP_KERNEL);
+	p->track = track;
 	do {
 		r = r600_cs_packet_parse(p, &pkt, p->idx);
 		if (r) {
@@ -757,6 +839,7 @@
 	/* initialize parser */
 	memset(&parser, 0, sizeof(struct radeon_cs_parser));
 	parser.filp = filp;
+	parser.dev = &dev->pdev->dev;
 	parser.rdev = NULL;
 	parser.family = family;
 	parser.ib = &fake_ib;
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 05894ed..3048088 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -882,4 +882,29 @@
 #define		S_000E60_SOFT_RESET_VMC(x)		(((x) & 1) << 17)
 
 #define R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL		0x5480
+
+#define R_0280E0_CB_COLOR0_FRAG                      0x0280E0
+#define   S_0280E0_BASE_256B(x)                        (((x) & 0xFFFFFFFF) << 0)
+#define   G_0280E0_BASE_256B(x)                        (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0280E0_BASE_256B                           0x00000000
+#define R_0280E4_CB_COLOR1_FRAG                      0x0280E4
+#define R_0280E8_CB_COLOR2_FRAG                      0x0280E8
+#define R_0280EC_CB_COLOR3_FRAG                      0x0280EC
+#define R_0280F0_CB_COLOR4_FRAG                      0x0280F0
+#define R_0280F4_CB_COLOR5_FRAG                      0x0280F4
+#define R_0280F8_CB_COLOR6_FRAG                      0x0280F8
+#define R_0280FC_CB_COLOR7_FRAG                      0x0280FC
+#define R_0280C0_CB_COLOR0_TILE                      0x0280C0
+#define   S_0280C0_BASE_256B(x)                        (((x) & 0xFFFFFFFF) << 0)
+#define   G_0280C0_BASE_256B(x)                        (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0280C0_BASE_256B                           0x00000000
+#define R_0280C4_CB_COLOR1_TILE                      0x0280C4
+#define R_0280C8_CB_COLOR2_TILE                      0x0280C8
+#define R_0280CC_CB_COLOR3_TILE                      0x0280CC
+#define R_0280D0_CB_COLOR4_TILE                      0x0280D0
+#define R_0280D4_CB_COLOR5_TILE                      0x0280D4
+#define R_0280D8_CB_COLOR6_TILE                      0x0280D8
+#define R_0280DC_CB_COLOR7_TILE                      0x0280DC
+
+
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index eb5f99b..c0356bb 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -96,6 +96,7 @@
  * symbol;
  */
 #define RADEON_MAX_USEC_TIMEOUT		100000	/* 100 ms */
+/* RADEON_IB_POOL_SIZE must be a power of 2 */
 #define RADEON_IB_POOL_SIZE		16
 #define RADEON_DEBUGFS_MAX_NUM_FILES	32
 #define RADEONFB_CONN_LIMIT		4
@@ -363,11 +364,12 @@
  */
 struct radeon_ib {
 	struct list_head	list;
-	unsigned long		idx;
+	unsigned		idx;
 	uint64_t		gpu_addr;
 	struct radeon_fence	*fence;
-	uint32_t	*ptr;
+	uint32_t		*ptr;
 	uint32_t		length_dw;
+	bool			free;
 };
 
 /*
@@ -377,10 +379,9 @@
 struct radeon_ib_pool {
 	struct mutex		mutex;
 	struct radeon_bo	*robj;
-	struct list_head	scheduled_ibs;
 	struct radeon_ib	ibs[RADEON_IB_POOL_SIZE];
 	bool			ready;
-	DECLARE_BITMAP(alloc_bm, RADEON_IB_POOL_SIZE);
+	unsigned		head_id;
 };
 
 struct radeon_cp {
@@ -410,13 +411,13 @@
 	unsigned		wptr_old;
 	unsigned		ring_size;
 	uint64_t		gpu_addr;
-	uint32_t		align_mask;
 	uint32_t		ptr_mask;
 	spinlock_t              lock;
 	bool                    enabled;
 };
 
 struct r600_blit {
+	struct mutex		mutex;
 	struct radeon_bo	*shader_obj;
 	u64 shader_gpu_addr;
 	u32 vs_offset, ps_offset;
@@ -465,6 +466,7 @@
 };
 
 struct radeon_cs_parser {
+	struct device		*dev;
 	struct radeon_device	*rdev;
 	struct drm_file		*filp;
 	/* chunks */
@@ -660,6 +662,13 @@
 	void (*hpd_fini)(struct radeon_device *rdev);
 	bool (*hpd_sense)(struct radeon_device *rdev, enum radeon_hpd_id hpd);
 	void (*hpd_set_polarity)(struct radeon_device *rdev, enum radeon_hpd_id hpd);
+	/* ioctl hw specific callback. Some hw might want to perform special
+	 * operation on specific ioctl. For instance on wait idle some hw
+	 * might want to perform and HDP flush through MMIO as it seems that
+	 * some R6XX/R7XX hw doesn't take HDP flush into account if programmed
+	 * through ring.
+	 */
+	void (*ioctl_wait_idle)(struct radeon_device *rdev, struct radeon_bo *bo);
 };
 
 /*
@@ -847,7 +856,7 @@
 
 static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg)
 {
-	if (reg < 0x10000)
+	if (reg < rdev->rmmio_size)
 		return readl(((void __iomem *)rdev->rmmio) + reg);
 	else {
 		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
@@ -857,7 +866,7 @@
 
 static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-	if (reg < 0x10000)
+	if (reg < rdev->rmmio_size)
 		writel(v, ((void __iomem *)rdev->rmmio) + reg);
 	else {
 		writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX);
@@ -1017,6 +1026,8 @@
 #define radeon_hpd_set_polarity(rdev, hpd) (rdev)->asic->hpd_set_polarity((rdev), (hpd))
 
 /* Common functions */
+/* AGP */
+extern void radeon_agp_disable(struct radeon_device *rdev);
 extern int radeon_gart_table_vram_pin(struct radeon_device *rdev);
 extern int radeon_modeset_init(struct radeon_device *rdev);
 extern void radeon_modeset_fini(struct radeon_device *rdev);
@@ -1140,6 +1151,7 @@
 extern void r600_cp_stop(struct radeon_device *rdev);
 extern void r600_ring_init(struct radeon_device *rdev, unsigned ring_size);
 extern int r600_cp_resume(struct radeon_device *rdev);
+extern void r600_cp_fini(struct radeon_device *rdev);
 extern int r600_count_pipe_bits(uint32_t val);
 extern int r600_gart_clear_page(struct radeon_device *rdev, int i);
 extern int r600_mc_wait_for_idle(struct radeon_device *rdev);
@@ -1160,7 +1172,8 @@
 extern void r600_irq_fini(struct radeon_device *rdev);
 extern void r600_ih_ring_init(struct radeon_device *rdev, unsigned ring_size);
 extern int r600_irq_set(struct radeon_device *rdev);
-
+extern void r600_irq_suspend(struct radeon_device *rdev);
+/* r600 audio */
 extern int r600_audio_init(struct radeon_device *rdev);
 extern int r600_audio_tmds_index(struct drm_encoder *encoder);
 extern void r600_audio_set_clock(struct drm_encoder *encoder, int clock);
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
index 220f454..c0681a55 100644
--- a/drivers/gpu/drm/radeon/radeon_agp.c
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -144,9 +144,19 @@
 
 	ret = drm_agp_info(rdev->ddev, &info);
 	if (ret) {
+		drm_agp_release(rdev->ddev);
 		DRM_ERROR("Unable to get AGP info: %d\n", ret);
 		return ret;
 	}
+
+	if (rdev->ddev->agp->agp_info.aper_size < 32) {
+		drm_agp_release(rdev->ddev);
+		dev_warn(rdev->dev, "AGP aperture too small (%zuM) "
+			"need at least 32M, disabling AGP\n",
+			rdev->ddev->agp->agp_info.aper_size);
+		return -EINVAL;
+	}
+
 	mode.mode = info.mode;
 	agp_status = (RREG32(RADEON_AGP_STATUS) | RADEON_AGPv3_MODE) & mode.mode;
 	is_v3 = !!(agp_status & RADEON_AGPv3_MODE);
@@ -221,6 +231,7 @@
 	ret = drm_agp_enable(rdev->ddev, mode);
 	if (ret) {
 		DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode);
+		drm_agp_release(rdev->ddev);
 		return ret;
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index f2fbd2e..05ee1ae 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -117,6 +117,7 @@
 	.hpd_fini = &r100_hpd_fini,
 	.hpd_sense = &r100_hpd_sense,
 	.hpd_set_polarity = &r100_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 
@@ -176,6 +177,7 @@
 	.hpd_fini = &r100_hpd_fini,
 	.hpd_sense = &r100_hpd_sense,
 	.hpd_set_polarity = &r100_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 /*
@@ -219,6 +221,7 @@
 	.hpd_fini = &r100_hpd_fini,
 	.hpd_sense = &r100_hpd_sense,
 	.hpd_set_polarity = &r100_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 
@@ -267,6 +270,7 @@
 	.hpd_fini = &r100_hpd_fini,
 	.hpd_sense = &r100_hpd_sense,
 	.hpd_set_polarity = &r100_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 
@@ -323,6 +327,7 @@
 	.hpd_fini = &rs600_hpd_fini,
 	.hpd_sense = &rs600_hpd_sense,
 	.hpd_set_polarity = &rs600_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 
@@ -370,6 +375,7 @@
 	.hpd_fini = &rs600_hpd_fini,
 	.hpd_sense = &rs600_hpd_sense,
 	.hpd_set_polarity = &rs600_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 
@@ -421,6 +427,7 @@
 	.hpd_fini = &rs600_hpd_fini,
 	.hpd_sense = &rs600_hpd_sense,
 	.hpd_set_polarity = &rs600_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 
@@ -463,6 +470,7 @@
 	.hpd_fini = &rs600_hpd_fini,
 	.hpd_sense = &rs600_hpd_sense,
 	.hpd_set_polarity = &rs600_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
 };
 
 /*
@@ -504,6 +512,7 @@
 bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
 void r600_hpd_set_polarity(struct radeon_device *rdev,
 			   enum radeon_hpd_id hpd);
+extern void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo);
 
 static struct radeon_asic r600_asic = {
 	.init = &r600_init,
@@ -538,6 +547,7 @@
 	.hpd_fini = &r600_hpd_fini,
 	.hpd_sense = &r600_hpd_sense,
 	.hpd_set_polarity = &r600_hpd_set_polarity,
+	.ioctl_wait_idle = r600_ioctl_wait_idle,
 };
 
 /*
@@ -582,6 +592,7 @@
 	.hpd_fini = &r600_hpd_fini,
 	.hpd_sense = &r600_hpd_sense,
 	.hpd_set_polarity = &r600_hpd_set_polarity,
+	.ioctl_wait_idle = r600_ioctl_wait_idle,
 };
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index fa82ca7..4d88315 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -206,6 +206,15 @@
 			*connector_type = DRM_MODE_CONNECTOR_DVID;
 	}
 
+	/* Asrock RS600 board lists the DVI port as HDMI */
+	if ((dev->pdev->device == 0x7941) &&
+	    (dev->pdev->subsystem_vendor == 0x1849) &&
+	    (dev->pdev->subsystem_device == 0x7941)) {
+		if ((*connector_type == DRM_MODE_CONNECTOR_HDMIA) &&
+		    (supported_device == ATOM_DEVICE_DFP3_SUPPORT))
+			*connector_type = DRM_MODE_CONNECTOR_DVID;
+	}
+
 	/* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */
 	if ((dev->pdev->device == 0x7941) &&
 	    (dev->pdev->subsystem_vendor == 0x147b) &&
@@ -287,6 +296,15 @@
 			*connector_type = DRM_MODE_CONNECTOR_DVID;
 	}
 
+	/* XFX Pine Group device rv730 reports no VGA DDC lines
+	 * even though they are wired up to record 0x93
+	 */
+	if ((dev->pdev->device == 0x9498) &&
+	    (dev->pdev->subsystem_vendor == 0x1682) &&
+	    (dev->pdev->subsystem_device == 0x2452)) {
+		struct radeon_device *rdev = dev->dev_private;
+		*i2c_bus = radeon_lookup_i2c_gpio(rdev, 0x93);
+	}
 	return true;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index 4ddfd4b..7932dc4 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -65,31 +65,42 @@
 	if (r) {
 		goto out_cleanup;
 	}
-	start_jiffies = jiffies;
-	for (i = 0; i < n; i++) {
-		r = radeon_fence_create(rdev, &fence);
-		if (r) {
-			goto out_cleanup;
+
+	/* r100 doesn't have dma engine so skip the test */
+	if (rdev->asic->copy_dma) {
+
+		start_jiffies = jiffies;
+		for (i = 0; i < n; i++) {
+			r = radeon_fence_create(rdev, &fence);
+			if (r) {
+				goto out_cleanup;
+			}
+
+			r = radeon_copy_dma(rdev, saddr, daddr,
+					size / RADEON_GPU_PAGE_SIZE, fence);
+
+			if (r) {
+				goto out_cleanup;
+			}
+			r = radeon_fence_wait(fence, false);
+			if (r) {
+				goto out_cleanup;
+			}
+			radeon_fence_unref(&fence);
 		}
-		r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence);
-		if (r) {
-			goto out_cleanup;
+		end_jiffies = jiffies;
+		time = end_jiffies - start_jiffies;
+		time = jiffies_to_msecs(time);
+		if (time > 0) {
+			i = ((n * size) >> 10) / time;
+			printk(KERN_INFO "radeon: dma %u bo moves of %ukb from"
+					" %d to %d in %lums (%ukb/ms %ukb/s %uM/s)\n",
+					n, size >> 10,
+					sdomain, ddomain, time,
+					i, i * 1000, (i * 1000) / 1024);
 		}
-		r = radeon_fence_wait(fence, false);
-		if (r) {
-			goto out_cleanup;
-		}
-		radeon_fence_unref(&fence);
 	}
-	end_jiffies = jiffies;
-	time = end_jiffies - start_jiffies;
-	time = jiffies_to_msecs(time);
-	if (time > 0) {
-		i = ((n * size) >> 10) / time;
-		printk(KERN_INFO "radeon: dma %u bo moves of %ukb from %d to %d"
-		       " in %lums (%ukb/ms %ukb/s %uM/s)\n", n, size >> 10,
-		       sdomain, ddomain, time, i, i * 1000, (i * 1000) / 1024);
-	}
+
 	start_jiffies = jiffies;
 	for (i = 0; i < n; i++) {
 		r = radeon_fence_create(rdev, &fence);
diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c
index 812f24d..73c4405 100644
--- a/drivers/gpu/drm/radeon/radeon_clocks.c
+++ b/drivers/gpu/drm/radeon/radeon_clocks.c
@@ -56,7 +56,7 @@
 	else if (post_div == 3)
 		sclk >>= 2;
 	else if (post_div == 4)
-		sclk >>= 4;
+		sclk >>= 3;
 
 	return sclk;
 }
@@ -86,7 +86,7 @@
 	else if (post_div == 3)
 		mclk >>= 2;
 	else if (post_div == 4)
-		mclk >>= 4;
+		mclk >>= 3;
 
 	return mclk;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 7914455..e7b1944 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -687,6 +687,9 @@
 	uint16_t tv_info;
 	enum radeon_tv_std tv_std = TV_STD_NTSC;
 
+	if (rdev->bios == NULL)
+		return tv_std;
+
 	tv_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
 	if (tv_info) {
 		if (RBIOS8(tv_info + 6) == 'T') {
@@ -968,8 +971,7 @@
 			 lvds->native_mode.vdisplay);
 
 		lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c);
-		if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0)
-			lvds->panel_vcc_delay = 2000;
+		lvds->panel_vcc_delay = min_t(u16, lvds->panel_vcc_delay, 2000);
 
 		lvds->panel_pwr_delay = RBIOS8(lcd_info + 0x24);
 		lvds->panel_digon_delay = RBIOS16(lcd_info + 0x38) & 0xf;
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 9da10dd..65f8194 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -580,16 +580,18 @@
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	struct drm_encoder *encoder;
 	struct drm_encoder_helper_funcs *encoder_funcs;
-	bool dret;
+	bool dret = false;
 	enum drm_connector_status ret = connector_status_disconnected;
 
 	encoder = radeon_best_single_encoder(connector);
 	if (!encoder)
 		ret = connector_status_disconnected;
 
-	radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
-	dret = radeon_ddc_probe(radeon_connector);
-	radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+	if (radeon_connector->ddc_bus) {
+		radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
+		dret = radeon_ddc_probe(radeon_connector);
+		radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+	}
 	if (dret) {
 		if (radeon_connector->edid) {
 			kfree(radeon_connector->edid);
@@ -740,11 +742,13 @@
 	struct drm_mode_object *obj;
 	int i;
 	enum drm_connector_status ret = connector_status_disconnected;
-	bool dret;
+	bool dret = false;
 
-	radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
-	dret = radeon_ddc_probe(radeon_connector);
-	radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+	if (radeon_connector->ddc_bus) {
+		radeon_i2c_do_lock(radeon_connector->ddc_bus, 1);
+		dret = radeon_ddc_probe(radeon_connector);
+		radeon_i2c_do_lock(radeon_connector->ddc_bus, 0);
+	}
 	if (dret) {
 		if (radeon_connector->edid) {
 			kfree(radeon_connector->edid);
@@ -776,7 +780,7 @@
 			 * connected and the DVI port disconnected.  If the edid doesn't
 			 * say HDMI, vice versa.
 			 */
-			if (radeon_connector->shared_ddc && connector_status_connected) {
+			if (radeon_connector->shared_ddc && (ret == connector_status_connected)) {
 				struct drm_device *dev = connector->dev;
 				struct drm_connector *list_connector;
 				struct radeon_connector *list_radeon_connector;
@@ -900,10 +904,18 @@
 static int radeon_dvi_mode_valid(struct drm_connector *connector,
 				  struct drm_display_mode *mode)
 {
+	struct drm_device *dev = connector->dev;
+	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 
 	/* XXX check mode bandwidth */
 
+	/* clocks over 135 MHz have heat issues with DVI on RV100 */
+	if (radeon_connector->use_digital &&
+	    (rdev->family == CHIP_RV100) &&
+	    (mode->clock > 135000))
+		return MODE_CLOCK_HIGH;
+
 	if (radeon_connector->use_digital && (mode->clock > 165000)) {
 		if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) ||
 		    (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) ||
@@ -1048,8 +1060,7 @@
 			return;
 		}
 		if (radeon_connector->ddc_bus && i2c_bus->valid) {
-			if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus,
-				    sizeof(struct radeon_i2c_bus_rec)) == 0) {
+			if (radeon_connector->ddc_bus->rec.i2c_id == i2c_bus->i2c_id) {
 				radeon_connector->shared_ddc = true;
 				shared_ddc = true;
 			}
@@ -1335,7 +1346,7 @@
 				radeon_connector->dac_load_detect = false;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
-						      1);
+						      radeon_connector->dac_load_detect);
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.tv_std_property,
 						      radeon_combios_get_tv_info(rdev));
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 65590a0..e9d0850 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -86,7 +86,7 @@
 						&p->validated);
 		}
 	}
-	return radeon_bo_list_validate(&p->validated, p->ib->fence);
+	return radeon_bo_list_validate(&p->validated);
 }
 
 int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
@@ -189,12 +189,10 @@
 {
 	unsigned i;
 
-	if (error) {
-		radeon_bo_list_unvalidate(&parser->validated,
-						parser->ib->fence);
-	} else {
-		radeon_bo_list_unreserve(&parser->validated);
+	if (!error && parser->ib) {
+		radeon_bo_list_fence(&parser->validated, parser->ib->fence);
 	}
+	radeon_bo_list_unreserve(&parser->validated);
 	for (i = 0; i < parser->nrelocs; i++) {
 		if (parser->relocs[i].gobj) {
 			mutex_lock(&parser->rdev->ddev->struct_mutex);
@@ -231,6 +229,7 @@
 	memset(&parser, 0, sizeof(struct radeon_cs_parser));
 	parser.filp = filp;
 	parser.rdev = rdev;
+	parser.dev = rdev->dev;
 	r = radeon_cs_parser_init(&parser, data);
 	if (r) {
 		DRM_ERROR("Failed to initialize parser !\n");
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 0c51f8e..768b150 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -544,6 +544,7 @@
 		rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
 		rdev->asic->gart_set_page = &r100_pci_gart_set_page;
 	}
+	rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
 }
 
 void radeon_check_arguments(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 0ec491e..7e17a36 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -278,7 +278,7 @@
 		DRM_INFO("  %s\n", connector_names[connector->connector_type]);
 		if (radeon_connector->hpd.hpd != RADEON_HPD_NONE)
 			DRM_INFO("  %s\n", hpd_names[radeon_connector->hpd.hpd]);
-		if (radeon_connector->ddc_bus)
+		if (radeon_connector->ddc_bus) {
 			DRM_INFO("  DDC: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
 				 radeon_connector->ddc_bus->rec.mask_clk_reg,
 				 radeon_connector->ddc_bus->rec.mask_data_reg,
@@ -288,6 +288,15 @@
 				 radeon_connector->ddc_bus->rec.en_data_reg,
 				 radeon_connector->ddc_bus->rec.y_clk_reg,
 				 radeon_connector->ddc_bus->rec.y_data_reg);
+		} else {
+			if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
+			    connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
+			    connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
+			    connector->connector_type == DRM_MODE_CONNECTOR_DVIA ||
+			    connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+			    connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)
+				DRM_INFO("  DDC: no ddc bus - possible BIOS bug - please report to xorg-driver-ati@lists.x.org\n");
+		}
 		DRM_INFO("  Encoders:\n");
 		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 			radeon_encoder = to_radeon_encoder(encoder);
@@ -357,7 +366,8 @@
 	if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
 	    (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
 		struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
-		if (dig->dp_i2c_bus)
+		if ((dig->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT ||
+		     dig->dp_sink_type == CONNECTOR_OBJECT_ID_eDP) && dig->dp_i2c_bus)
 			radeon_connector->edid = drm_get_edid(&radeon_connector->base, &dig->dp_i2c_bus->adapter);
 	}
 	if (!radeon_connector->ddc_bus)
@@ -410,11 +420,12 @@
 			uint32_t *fb_div_p,
 			uint32_t *frac_fb_div_p,
 			uint32_t *ref_div_p,
-			uint32_t *post_div_p,
-			int flags)
+			uint32_t *post_div_p)
 {
 	uint32_t min_ref_div = pll->min_ref_div;
 	uint32_t max_ref_div = pll->max_ref_div;
+	uint32_t min_post_div = pll->min_post_div;
+	uint32_t max_post_div = pll->max_post_div;
 	uint32_t min_fractional_feed_div = 0;
 	uint32_t max_fractional_feed_div = 0;
 	uint32_t best_vco = pll->best_vco;
@@ -430,7 +441,7 @@
 	DRM_DEBUG("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div);
 	freq = freq * 1000;
 
-	if (flags & RADEON_PLL_USE_REF_DIV)
+	if (pll->flags & RADEON_PLL_USE_REF_DIV)
 		min_ref_div = max_ref_div = pll->reference_div;
 	else {
 		while (min_ref_div < max_ref_div-1) {
@@ -445,19 +456,22 @@
 		}
 	}
 
-	if (flags & RADEON_PLL_USE_FRAC_FB_DIV) {
+	if (pll->flags & RADEON_PLL_USE_POST_DIV)
+		min_post_div = max_post_div = pll->post_div;
+
+	if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) {
 		min_fractional_feed_div = pll->min_frac_feedback_div;
 		max_fractional_feed_div = pll->max_frac_feedback_div;
 	}
 
-	for (post_div = pll->min_post_div; post_div <= pll->max_post_div; ++post_div) {
+	for (post_div = min_post_div; post_div <= max_post_div; ++post_div) {
 		uint32_t ref_div;
 
-		if ((flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
+		if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
 			continue;
 
 		/* legacy radeons only have a few post_divs */
-		if (flags & RADEON_PLL_LEGACY) {
+		if (pll->flags & RADEON_PLL_LEGACY) {
 			if ((post_div == 5) ||
 			    (post_div == 7) ||
 			    (post_div == 9) ||
@@ -504,7 +518,7 @@
 					tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
 					current_freq = radeon_div(tmp, ref_div * post_div);
 
-					if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+					if (pll->flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
 						error = freq - current_freq;
 						error = error < 0 ? 0xffffffff : error;
 					} else
@@ -531,12 +545,12 @@
 							best_freq = current_freq;
 							best_error = error;
 							best_vco_diff = vco_diff;
-						} else if (((flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) ||
-							   ((flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) ||
-							   ((flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) ||
-							   ((flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) ||
-							   ((flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) ||
-							   ((flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) {
+						} else if (((pll->flags & RADEON_PLL_PREFER_LOW_REF_DIV) && (ref_div < best_ref_div)) ||
+							   ((pll->flags & RADEON_PLL_PREFER_HIGH_REF_DIV) && (ref_div > best_ref_div)) ||
+							   ((pll->flags & RADEON_PLL_PREFER_LOW_FB_DIV) && (feedback_div < best_feedback_div)) ||
+							   ((pll->flags & RADEON_PLL_PREFER_HIGH_FB_DIV) && (feedback_div > best_feedback_div)) ||
+							   ((pll->flags & RADEON_PLL_PREFER_LOW_POST_DIV) && (post_div < best_post_div)) ||
+							   ((pll->flags & RADEON_PLL_PREFER_HIGH_POST_DIV) && (post_div > best_post_div))) {
 							best_post_div = post_div;
 							best_ref_div = ref_div;
 							best_feedback_div = feedback_div;
@@ -572,8 +586,7 @@
 			      uint32_t *fb_div_p,
 			      uint32_t *frac_fb_div_p,
 			      uint32_t *ref_div_p,
-			      uint32_t *post_div_p,
-			      int flags)
+			      uint32_t *post_div_p)
 {
 	fixed20_12 m, n, frac_n, p, f_vco, f_pclk, best_freq;
 	fixed20_12 pll_out_max, pll_out_min;
@@ -667,7 +680,6 @@
 		radeonfb_remove(dev, fb);
 
 	if (radeon_fb->obj) {
-		radeon_gem_object_unpin(radeon_fb->obj);
 		mutex_lock(&dev->struct_mutex);
 		drm_gem_object_unreference(radeon_fb->obj);
 		mutex_unlock(&dev->struct_mutex);
@@ -715,7 +727,11 @@
 	struct drm_gem_object *obj;
 
 	obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
-
+	if (obj ==  NULL) {
+		dev_err(&dev->pdev->dev, "No GEM object associated to handle 0x%08X, "
+			"can't create framebuffer\n", mode_cmd->handle);
+		return NULL;
+	}
 	return radeon_framebuffer_create(dev, mode_cmd, obj);
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index e137852..c57ad60 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -106,9 +106,10 @@
  * 1.29- R500 3D cmd buffer support
  * 1.30- Add support for occlusion queries
  * 1.31- Add support for num Z pipes from GET_PARAM
+ * 1.32- fixes for rv740 setup
  */
 #define DRIVER_MAJOR		1
-#define DRIVER_MINOR		31
+#define DRIVER_MINOR		32
 #define DRIVER_PATCHLEVEL	0
 
 enum radeon_cp_microcode_version {
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 82eb551..3c91724 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -156,6 +156,26 @@
 	return ret;
 }
 
+static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
+{
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
+	case ENCODER_OBJECT_ID_INTERNAL_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+	case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+	case ENCODER_OBJECT_ID_INTERNAL_DDI:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		return true;
+	default:
+		return false;
+	}
+}
 void
 radeon_link_encoder_connector(struct drm_device *dev)
 {
@@ -202,7 +222,7 @@
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		radeon_connector = to_radeon_connector(connector);
-		if (radeon_encoder->devices & radeon_connector->devices)
+		if (radeon_encoder->active_device & radeon_connector->devices)
 			return connector;
 	}
 	return NULL;
@@ -676,31 +696,11 @@
 
 	memset(&args, 0, sizeof(args));
 
-	if (ASIC_IS_DCE32(rdev)) {
-		if (dig->dig_block)
-			index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
-		else
-			index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
-		num = dig->dig_block + 1;
-	} else {
-		switch (radeon_encoder->encoder_id) {
-		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-			/* XXX doesn't really matter which dig encoder we pick as long as it's
-			 * not already in use
-			 */
-			if (dig_connector->linkb)
-				index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
-			else
-				index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
-			num = 1;
-			break;
-		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-			/* Only dig2 encoder can drive LVTMA */
-			index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
-			num = 2;
-			break;
-		}
-	}
+	if (dig->dig_encoder)
+		index = GetIndexIntoMasterTable(COMMAND, DIG2EncoderControl);
+	else
+		index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
+	num = dig->dig_encoder + 1;
 
 	atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
 
@@ -822,7 +822,7 @@
 			args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
 	}
 	if (ASIC_IS_DCE32(rdev)) {
-		if (dig->dig_block)
+		if (dig->dig_encoder == 1)
 			args.v2.acConfig.ucEncoderSel = 1;
 		if (dig_connector->linkb)
 			args.v2.acConfig.ucLinkSel = 1;
@@ -849,17 +849,16 @@
 				args.v2.acConfig.fCoherentMode = 1;
 		}
 	} else {
+
 		args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
 
+		if (dig->dig_encoder)
+			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
+		else
+			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
+
 		switch (radeon_encoder->encoder_id) {
 		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
-			/* XXX doesn't really matter which dig encoder we pick as long as it's
-			 * not already in use
-			 */
-			if (dig_connector->linkb)
-				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
-			else
-				args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
 			if (rdev->flags & RADEON_IS_IGP) {
 				if (radeon_encoder->pixel_clock > 165000) {
 					if (dig_connector->igp_lane_info & 0x3)
@@ -878,10 +877,6 @@
 				}
 			}
 			break;
-		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-			/* Only dig2 encoder can drive LVTMA */
-			args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
-			break;
 		}
 
 		if (radeon_encoder->pixel_clock > 165000)
@@ -1046,6 +1041,7 @@
 	union crtc_sourc_param args;
 	int index = GetIndexIntoMasterTable(COMMAND, SelectCRTC_Source);
 	uint8_t frev, crev;
+	struct radeon_encoder_atom_dig *dig;
 
 	memset(&args, 0, sizeof(args));
 
@@ -1109,40 +1105,16 @@
 			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
 			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
 			case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
-				if (ASIC_IS_DCE32(rdev)) {
-					if (radeon_crtc->crtc_id)
-						args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
-					else
-						args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
-				} else {
-					struct drm_connector *connector;
-					struct radeon_connector *radeon_connector;
-					struct radeon_connector_atom_dig *dig_connector;
-
-					connector = radeon_get_connector_for_encoder(encoder);
-					if (!connector)
-						return;
-					radeon_connector = to_radeon_connector(connector);
-					if (!radeon_connector->con_priv)
-						return;
-					dig_connector = radeon_connector->con_priv;
-
-					/* XXX doesn't really matter which dig encoder we pick as long as it's
-					 * not already in use
-					 */
-					if (dig_connector->linkb)
-						args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
-					else
-						args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
-				}
+			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+				dig = radeon_encoder->enc_priv;
+				if (dig->dig_encoder)
+					args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
+				else
+					args.v2.ucEncoderID = ASIC_INT_DIG1_ENCODER_ID;
 				break;
 			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
 				args.v2.ucEncoderID = ASIC_INT_DVO_ENCODER_ID;
 				break;
-			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
-				/* Only dig2 encoder can drive LVTMA */
-				args.v2.ucEncoderID = ASIC_INT_DIG2_ENCODER_ID;
-				break;
 			case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
 				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
 					args.v2.ucEncoderID = ASIC_INT_TV_ENCODER_ID;
@@ -1202,6 +1174,47 @@
 	}
 }
 
+static int radeon_atom_pick_dig_encoder(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *test_encoder;
+	struct radeon_encoder_atom_dig *dig;
+	uint32_t dig_enc_in_use = 0;
+	/* on DCE32 and encoder can driver any block so just crtc id */
+	if (ASIC_IS_DCE32(rdev)) {
+		return radeon_crtc->crtc_id;
+	}
+
+	/* on DCE3 - LVTMA can only be driven by DIGB */
+	list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
+		struct radeon_encoder *radeon_test_encoder;
+
+		if (encoder == test_encoder)
+			continue;
+
+		if (!radeon_encoder_is_digital(test_encoder))
+			continue;
+
+		radeon_test_encoder = to_radeon_encoder(test_encoder);
+		dig = radeon_test_encoder->enc_priv;
+
+		if (dig->dig_encoder >= 0)
+			dig_enc_in_use |= (1 << dig->dig_encoder);
+	}
+
+	if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA) {
+		if (dig_enc_in_use & 0x2)
+			DRM_ERROR("LVDS required digital encoder 2 but it was in use - stealing\n");
+		return 1;
+	}
+	if (!(dig_enc_in_use & 1))
+		return 0;
+	return 1;
+}
+
 static void
 radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 			     struct drm_display_mode *mode,
@@ -1214,12 +1227,9 @@
 
 	if (radeon_encoder->active_device &
 	    (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
-		if (radeon_encoder->enc_priv) {
-			struct radeon_encoder_atom_dig *dig;
-
-			dig = radeon_encoder->enc_priv;
-			dig->dig_block = radeon_crtc->crtc_id;
-		}
+		struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+		if (dig)
+			dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
 	}
 	radeon_encoder->pixel_clock = adjusted_mode->clock;
 
@@ -1379,7 +1389,13 @@
 static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 {
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct radeon_encoder_atom_dig *dig;
 	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
+	if (radeon_encoder_is_digital(encoder)) {
+		dig = radeon_encoder->enc_priv;
+		dig->dig_encoder = -1;
+	}
 	radeon_encoder->active_device = 0;
 }
 
@@ -1436,6 +1452,7 @@
 
 	/* coherent mode by default */
 	dig->coherent_mode = true;
+	dig->dig_encoder = -1;
 
 	return dig;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 3ba213d..d71e346 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -248,7 +248,7 @@
 	if (ret)
 		goto out_unref;
 
-	memset_io(fbptr, 0xff, aligned_size);
+	memset_io(fbptr, 0x0, aligned_size);
 
 	strcpy(info->fix.id, "radeondrmfb");
 
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index 0e1325e..db8e9a3 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -308,6 +308,9 @@
 	}
 	robj = gobj->driver_private;
 	r = radeon_bo_wait(robj, NULL, false);
+	/* callback hw specific functions if any */
+	if (robj->rdev->asic->ioctl_wait_idle)
+		robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj);
 	mutex_lock(&dev->struct_mutex);
 	drm_gem_object_unreference(gobj);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index cc27485..b6d8081 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -339,69 +339,6 @@
 	}
 }
 
-/* properly set crtc bpp when using atombios */
-void radeon_legacy_atom_set_surface(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-	int format;
-	uint32_t crtc_gen_cntl;
-	uint32_t disp_merge_cntl;
-	uint32_t crtc_pitch;
-
-	switch (crtc->fb->bits_per_pixel) {
-	case 8:
-		format = 2;
-		break;
-	case 15:      /*  555 */
-		format = 3;
-		break;
-	case 16:      /*  565 */
-		format = 4;
-		break;
-	case 24:      /*  RGB */
-		format = 5;
-		break;
-	case 32:      /* xRGB */
-		format = 6;
-		break;
-	default:
-		return;
-	}
-
-	crtc_pitch  = ((((crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8)) * crtc->fb->bits_per_pixel) +
-			((crtc->fb->bits_per_pixel * 8) - 1)) /
-		       (crtc->fb->bits_per_pixel * 8));
-	crtc_pitch |= crtc_pitch << 16;
-
-	WREG32(RADEON_CRTC_PITCH + radeon_crtc->crtc_offset, crtc_pitch);
-
-	switch (radeon_crtc->crtc_id) {
-	case 0:
-		disp_merge_cntl = RREG32(RADEON_DISP_MERGE_CNTL);
-		disp_merge_cntl &= ~RADEON_DISP_RGB_OFFSET_EN;
-		WREG32(RADEON_DISP_MERGE_CNTL, disp_merge_cntl);
-
-		crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL) & 0xfffff0ff;
-		crtc_gen_cntl |= (format << 8);
-		crtc_gen_cntl |= RADEON_CRTC_EXT_DISP_EN;
-		WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
-		break;
-	case 1:
-		disp_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
-		disp_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
-		WREG32(RADEON_DISP2_MERGE_CNTL, disp_merge_cntl);
-
-		crtc_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL) & 0xfffff0ff;
-		crtc_gen_cntl |= (format << 8);
-		WREG32(RADEON_CRTC2_GEN_CNTL, crtc_gen_cntl);
-		WREG32(RADEON_FP_H2_SYNC_STRT_WID,   RREG32(RADEON_CRTC2_H_SYNC_STRT_WID));
-		WREG32(RADEON_FP_V2_SYNC_STRT_WID,   RREG32(RADEON_CRTC2_V_SYNC_STRT_WID));
-		break;
-	}
-}
-
 int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 			 struct drm_framebuffer *old_fb)
 {
@@ -755,7 +692,6 @@
 	uint32_t post_divider = 0;
 	uint32_t freq = 0;
 	uint8_t pll_gain;
-	int pll_flags = RADEON_PLL_LEGACY;
 	bool use_bios_divs = false;
 	/* PLL registers */
 	uint32_t pll_ref_div = 0;
@@ -789,10 +725,12 @@
 	else
 		pll = &rdev->clock.p1pll;
 
+	pll->flags = RADEON_PLL_LEGACY;
+
 	if (mode->clock > 200000) /* range limits??? */
-		pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
+		pll->flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
 	else
-		pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+		pll->flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		if (encoder->crtc == crtc) {
@@ -804,7 +742,7 @@
 			}
 
 			if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
-				pll_flags |= RADEON_PLL_NO_ODD_POST_DIV;
+				pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
 			if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) {
 				if (!rdev->is_atom_bios) {
 					struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
@@ -819,7 +757,7 @@
 						}
 					}
 				}
-				pll_flags |= RADEON_PLL_USE_REF_DIV;
+				pll->flags |= RADEON_PLL_USE_REF_DIV;
 			}
 		}
 	}
@@ -829,8 +767,7 @@
 	if (!use_bios_divs) {
 		radeon_compute_pll(pll, mode->clock,
 				   &freq, &feedback_div, &frac_fb_div,
-				   &reference_div, &post_divider,
-				   pll_flags);
+				   &reference_div, &post_divider);
 
 		for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
 			if (post_div->divider == post_divider)
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 981508f..38e45e2 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -46,6 +46,7 @@
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	uint32_t lvds_gen_cntl, lvds_pll_cntl, pixclks_cntl, disp_pwr_man;
 	int panel_pwr_delay = 2000;
+	bool is_mac = false;
 	DRM_DEBUG("\n");
 
 	if (radeon_encoder->enc_priv) {
@@ -58,6 +59,15 @@
 		}
 	}
 
+	/* macs (and possibly some x86 oem systems?) wire up LVDS strangely
+	 * Taken from radeonfb.
+	 */
+	if ((rdev->mode_info.connector_table == CT_IBOOK) ||
+	    (rdev->mode_info.connector_table == CT_POWERBOOK_EXTERNAL) ||
+	    (rdev->mode_info.connector_table == CT_POWERBOOK_INTERNAL) ||
+	    (rdev->mode_info.connector_table == CT_POWERBOOK_VGA))
+		is_mac = true;
+
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
 		disp_pwr_man = RREG32(RADEON_DISP_PWR_MAN);
@@ -74,6 +84,8 @@
 
 		lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
 		lvds_gen_cntl |= (RADEON_LVDS_ON | RADEON_LVDS_EN | RADEON_LVDS_DIGON | RADEON_LVDS_BLON);
+		if (is_mac)
+			lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN;
 		lvds_gen_cntl &= ~(RADEON_LVDS_DISPLAY_DIS);
 		udelay(panel_pwr_delay * 1000);
 		WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
@@ -85,7 +97,14 @@
 		WREG32_PLL_P(RADEON_PIXCLKS_CNTL, 0, ~RADEON_PIXCLK_LVDS_ALWAYS_ONb);
 		lvds_gen_cntl = RREG32(RADEON_LVDS_GEN_CNTL);
 		lvds_gen_cntl |= RADEON_LVDS_DISPLAY_DIS;
-		lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+		if (is_mac) {
+			lvds_gen_cntl &= ~RADEON_LVDS_BL_MOD_EN;
+			WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+			lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_EN);
+		} else {
+			WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
+			lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
+		}
 		udelay(panel_pwr_delay * 1000);
 		WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
 		WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 91cb041..e81b2ae 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -125,16 +125,24 @@
 #define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
 #define RADEON_PLL_USE_FRAC_FB_DIV      (1 << 10)
 #define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
+#define RADEON_PLL_USE_POST_DIV         (1 << 12)
 
 struct radeon_pll {
-	uint16_t reference_freq;
-	uint16_t reference_div;
+	/* reference frequency */
+	uint32_t reference_freq;
+
+	/* fixed dividers */
+	uint32_t reference_div;
+	uint32_t post_div;
+
+	/* pll in/out limits */
 	uint32_t pll_in_min;
 	uint32_t pll_in_max;
 	uint32_t pll_out_min;
 	uint32_t pll_out_max;
-	uint16_t xclk;
+	uint32_t best_vco;
 
+	/* divider limits */
 	uint32_t min_ref_div;
 	uint32_t max_ref_div;
 	uint32_t min_post_div;
@@ -143,7 +151,12 @@
 	uint32_t max_feedback_div;
 	uint32_t min_frac_feedback_div;
 	uint32_t max_frac_feedback_div;
-	uint32_t best_vco;
+
+	/* flags for the current clock */
+	uint32_t flags;
+
+	/* pll id */
+	uint32_t id;
 };
 
 struct radeon_i2c_chan {
@@ -286,7 +299,7 @@
 struct radeon_encoder_atom_dig {
 	/* atom dig */
 	bool coherent_mode;
-	int dig_block;
+	int dig_encoder; /* -1 disabled, 0 DIGA, 1 DIGB */
 	/* atom lvds */
 	uint32_t lvds_misc;
 	uint16_t panel_pwr_delay;
@@ -417,8 +430,7 @@
 			       uint32_t *fb_div_p,
 			       uint32_t *frac_fb_div_p,
 			       uint32_t *ref_div_p,
-			       uint32_t *post_div_p,
-			       int flags);
+			       uint32_t *post_div_p);
 
 extern void radeon_compute_pll_avivo(struct radeon_pll *pll,
 				     uint64_t freq,
@@ -426,8 +438,7 @@
 				     uint32_t *fb_div_p,
 				     uint32_t *frac_fb_div_p,
 				     uint32_t *ref_div_p,
-				     uint32_t *post_div_p,
-				     int flags);
+				     uint32_t *post_div_p);
 
 extern void radeon_setup_encoder_clones(struct drm_device *dev);
 
@@ -453,7 +464,6 @@
 
 extern int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 				 struct drm_framebuffer *old_fb);
-extern void radeon_legacy_atom_set_surface(struct drm_crtc *crtc);
 
 extern int radeon_crtc_cursor_set(struct drm_crtc *crtc,
 				  struct drm_file *file_priv,
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 4e636de..f1da370 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -220,7 +220,8 @@
 
 int radeon_bo_evict_vram(struct radeon_device *rdev)
 {
-	if (rdev->flags & RADEON_IS_IGP) {
+	/* late 2.6.33 fix IGP hibernate - we need pm ops to do this correct */
+	if (0 && (rdev->flags & RADEON_IS_IGP)) {
 		if (rdev->mc.igp_sideport_enabled == false)
 			/* Useless to evict on IGP chips */
 			return 0;
@@ -305,11 +306,10 @@
 	}
 }
 
-int radeon_bo_list_validate(struct list_head *head, void *fence)
+int radeon_bo_list_validate(struct list_head *head)
 {
 	struct radeon_bo_list *lobj;
 	struct radeon_bo *bo;
-	struct radeon_fence *old_fence = NULL;
 	int r;
 
 	r = radeon_bo_list_reserve(head);
@@ -333,32 +333,27 @@
 		}
 		lobj->gpu_offset = radeon_bo_gpu_offset(bo);
 		lobj->tiling_flags = bo->tiling_flags;
-		if (fence) {
-			old_fence = (struct radeon_fence *)bo->tbo.sync_obj;
-			bo->tbo.sync_obj = radeon_fence_ref(fence);
-			bo->tbo.sync_obj_arg = NULL;
-		}
-		if (old_fence) {
-			radeon_fence_unref(&old_fence);
-		}
 	}
 	return 0;
 }
 
-void radeon_bo_list_unvalidate(struct list_head *head, void *fence)
+void radeon_bo_list_fence(struct list_head *head, void *fence)
 {
 	struct radeon_bo_list *lobj;
-	struct radeon_fence *old_fence;
+	struct radeon_bo *bo;
+	struct radeon_fence *old_fence = NULL;
 
-	if (fence)
-		list_for_each_entry(lobj, head, list) {
-			old_fence = to_radeon_fence(lobj->bo->tbo.sync_obj);
-			if (old_fence == fence) {
-				lobj->bo->tbo.sync_obj = NULL;
-				radeon_fence_unref(&old_fence);
-			}
+	list_for_each_entry(lobj, head, list) {
+		bo = lobj->bo;
+		spin_lock(&bo->tbo.lock);
+		old_fence = (struct radeon_fence *)bo->tbo.sync_obj;
+		bo->tbo.sync_obj = radeon_fence_ref(fence);
+		bo->tbo.sync_obj_arg = NULL;
+		spin_unlock(&bo->tbo.lock);
+		if (old_fence) {
+			radeon_fence_unref(&old_fence);
 		}
-	radeon_bo_list_unreserve(head);
+	}
 }
 
 int radeon_bo_fbdev_mmap(struct radeon_bo *bo,
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index a02f180..7ab43de 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -156,8 +156,8 @@
 				struct list_head *head);
 extern int radeon_bo_list_reserve(struct list_head *head);
 extern void radeon_bo_list_unreserve(struct list_head *head);
-extern int radeon_bo_list_validate(struct list_head *head, void *fence);
-extern void radeon_bo_list_unvalidate(struct list_head *head, void *fence);
+extern int radeon_bo_list_validate(struct list_head *head);
+extern void radeon_bo_list_fence(struct list_head *head, void *fence);
 extern int radeon_bo_fbdev_mmap(struct radeon_bo *bo,
 				struct vm_area_struct *vma);
 extern int radeon_bo_set_tiling_flags(struct radeon_bo *bo,
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 4d12b2d..6579eb4 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -41,68 +41,55 @@
 {
 	struct radeon_fence *fence;
 	struct radeon_ib *nib;
-	unsigned long i;
-	int r = 0;
+	int r = 0, i, c;
 
 	*ib = NULL;
 	r = radeon_fence_create(rdev, &fence);
 	if (r) {
-		DRM_ERROR("failed to create fence for new IB\n");
+		dev_err(rdev->dev, "failed to create fence for new IB\n");
 		return r;
 	}
 	mutex_lock(&rdev->ib_pool.mutex);
-	i = find_first_zero_bit(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
-	if (i < RADEON_IB_POOL_SIZE) {
-		set_bit(i, rdev->ib_pool.alloc_bm);
-		rdev->ib_pool.ibs[i].length_dw = 0;
-		*ib = &rdev->ib_pool.ibs[i];
-		mutex_unlock(&rdev->ib_pool.mutex);
-		goto out;
+	for (i = rdev->ib_pool.head_id, c = 0, nib = NULL; c < RADEON_IB_POOL_SIZE; c++, i++) {
+		i &= (RADEON_IB_POOL_SIZE - 1);
+		if (rdev->ib_pool.ibs[i].free) {
+			nib = &rdev->ib_pool.ibs[i];
+			break;
+		}
 	}
-	if (list_empty(&rdev->ib_pool.scheduled_ibs)) {
-		/* we go do nothings here */
+	if (nib == NULL) {
+		/* This should never happen, it means we allocated all
+		 * IB and haven't scheduled one yet, return EBUSY to
+		 * userspace hoping that on ioctl recall we get better
+		 * luck
+		 */
+		dev_err(rdev->dev, "no free indirect buffer !\n");
 		mutex_unlock(&rdev->ib_pool.mutex);
-		DRM_ERROR("all IB allocated none scheduled.\n");
-		r = -EINVAL;
-		goto out;
+		radeon_fence_unref(&fence);
+		return -EBUSY;
 	}
-	/* get the first ib on the scheduled list */
-	nib = list_entry(rdev->ib_pool.scheduled_ibs.next,
-			 struct radeon_ib, list);
-	if (nib->fence == NULL) {
-		/* we go do nothings here */
+	rdev->ib_pool.head_id = (nib->idx + 1) & (RADEON_IB_POOL_SIZE - 1);
+	nib->free = false;
+	if (nib->fence) {
 		mutex_unlock(&rdev->ib_pool.mutex);
-		DRM_ERROR("IB %lu scheduled without a fence.\n", nib->idx);
-		r = -EINVAL;
-		goto out;
-	}
-	mutex_unlock(&rdev->ib_pool.mutex);
-
-	r = radeon_fence_wait(nib->fence, false);
-	if (r) {
-		DRM_ERROR("radeon: IB(%lu:0x%016lX:%u)\n", nib->idx,
-			  (unsigned long)nib->gpu_addr, nib->length_dw);
-		DRM_ERROR("radeon: GPU lockup detected, fail to get a IB\n");
-		goto out;
+		r = radeon_fence_wait(nib->fence, false);
+		if (r) {
+			dev_err(rdev->dev, "error waiting fence of IB(%u:0x%016lX:%u)\n",
+				nib->idx, (unsigned long)nib->gpu_addr, nib->length_dw);
+			mutex_lock(&rdev->ib_pool.mutex);
+			nib->free = true;
+			mutex_unlock(&rdev->ib_pool.mutex);
+			radeon_fence_unref(&fence);
+			return r;
+		}
+		mutex_lock(&rdev->ib_pool.mutex);
 	}
 	radeon_fence_unref(&nib->fence);
-
+	nib->fence = fence;
 	nib->length_dw = 0;
-
-	/* scheduled list is accessed here */
-	mutex_lock(&rdev->ib_pool.mutex);
-	list_del(&nib->list);
-	INIT_LIST_HEAD(&nib->list);
 	mutex_unlock(&rdev->ib_pool.mutex);
-
 	*ib = nib;
-out:
-	if (r) {
-		radeon_fence_unref(&fence);
-	} else {
-		(*ib)->fence = fence;
-	}
-	return r;
+	return 0;
 }
 
 void radeon_ib_free(struct radeon_device *rdev, struct radeon_ib **ib)
@@ -113,19 +100,10 @@
 	if (tmp == NULL) {
 		return;
 	}
-	mutex_lock(&rdev->ib_pool.mutex);
-	if (!list_empty(&tmp->list) && !radeon_fence_signaled(tmp->fence)) {
-		/* IB is scheduled & not signaled don't do anythings */
-		mutex_unlock(&rdev->ib_pool.mutex);
-		return;
-	}
-	list_del(&tmp->list);
-	INIT_LIST_HEAD(&tmp->list);
-	if (tmp->fence)
+	if (!tmp->fence->emited)
 		radeon_fence_unref(&tmp->fence);
-
-	tmp->length_dw = 0;
-	clear_bit(tmp->idx, rdev->ib_pool.alloc_bm);
+	mutex_lock(&rdev->ib_pool.mutex);
+	tmp->free = true;
 	mutex_unlock(&rdev->ib_pool.mutex);
 }
 
@@ -135,7 +113,7 @@
 
 	if (!ib->length_dw || !rdev->cp.ready) {
 		/* TODO: Nothings in the ib we should report. */
-		DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
+		DRM_ERROR("radeon: couldn't schedule IB(%u).\n", ib->idx);
 		return -EINVAL;
 	}
 
@@ -148,7 +126,8 @@
 	radeon_ring_ib_execute(rdev, ib);
 	radeon_fence_emit(rdev, ib->fence);
 	mutex_lock(&rdev->ib_pool.mutex);
-	list_add_tail(&ib->list, &rdev->ib_pool.scheduled_ibs);
+	/* once scheduled IB is considered free and protected by the fence */
+	ib->free = true;
 	mutex_unlock(&rdev->ib_pool.mutex);
 	radeon_ring_unlock_commit(rdev);
 	return 0;
@@ -164,7 +143,6 @@
 	if (rdev->ib_pool.robj)
 		return 0;
 	/* Allocate 1M object buffer */
-	INIT_LIST_HEAD(&rdev->ib_pool.scheduled_ibs);
 	r = radeon_bo_create(rdev, NULL,  RADEON_IB_POOL_SIZE*64*1024,
 				true, RADEON_GEM_DOMAIN_GTT,
 				&rdev->ib_pool.robj);
@@ -195,9 +173,9 @@
 		rdev->ib_pool.ibs[i].ptr = ptr + offset;
 		rdev->ib_pool.ibs[i].idx = i;
 		rdev->ib_pool.ibs[i].length_dw = 0;
-		INIT_LIST_HEAD(&rdev->ib_pool.ibs[i].list);
+		rdev->ib_pool.ibs[i].free = true;
 	}
-	bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
+	rdev->ib_pool.head_id = 0;
 	rdev->ib_pool.ready = true;
 	DRM_INFO("radeon: ib pool ready.\n");
 	if (radeon_debugfs_ib_init(rdev)) {
@@ -214,7 +192,6 @@
 		return;
 	}
 	mutex_lock(&rdev->ib_pool.mutex);
-	bitmap_zero(rdev->ib_pool.alloc_bm, RADEON_IB_POOL_SIZE);
 	if (rdev->ib_pool.robj) {
 		r = radeon_bo_reserve(rdev->ib_pool.robj, false);
 		if (likely(r == 0)) {
@@ -363,7 +340,7 @@
 	if (ib == NULL) {
 		return 0;
 	}
-	seq_printf(m, "IB %04lu\n", ib->idx);
+	seq_printf(m, "IB %04u\n", ib->idx);
 	seq_printf(m, "IB fence %p\n", ib->fence);
 	seq_printf(m, "IB size %05u dwords\n", ib->length_dw);
 	for (i = 0; i < ib->length_dw; i++) {
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 3b0c07b..58b5adf 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -215,7 +215,10 @@
 	rbo = container_of(bo, struct radeon_bo, tbo);
 	switch (bo->mem.mem_type) {
 	case TTM_PL_VRAM:
-		radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
+		if (rbo->rdev->cp.ready == false)
+			radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_CPU);
+		else
+			radeon_ttm_placement_from_domain(rbo, RADEON_GEM_DOMAIN_GTT);
 		break;
 	case TTM_PL_TT:
 	default:
diff --git a/drivers/gpu/drm/radeon/reg_srcs/r200 b/drivers/gpu/drm/radeon/reg_srcs/r200
index 6021c88..c29ac43 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/r200
+++ b/drivers/gpu/drm/radeon/reg_srcs/r200
@@ -91,6 +91,8 @@
 0x22b8 SE_TCL_TEX_CYL_WRAP_CTL
 0x22c0 SE_TCL_UCP_VERT_BLEND_CNTL
 0x22c4 SE_TCL_POINT_SPRITE_CNTL
+0x22d0 SE_PVS_CNTL
+0x22d4 SE_PVS_CONST_CNTL
 0x2648 RE_POINTSIZE
 0x26c0 RE_TOP_LEFT
 0x26c4 RE_MISC
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 9f54189..287fceb 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -223,15 +223,31 @@
 	return 0;
 }
 
+int rs400_mc_wait_for_idle(struct radeon_device *rdev)
+{
+	unsigned i;
+	uint32_t tmp;
+
+	for (i = 0; i < rdev->usec_timeout; i++) {
+		/* read MC_STATUS */
+		tmp = RREG32(0x0150);
+		if (tmp & (1 << 2)) {
+			return 0;
+		}
+		DRM_UDELAY(1);
+	}
+	return -1;
+}
+
 void rs400_gpu_init(struct radeon_device *rdev)
 {
 	/* FIXME: HDP same place on rs400 ? */
 	r100_hdp_reset(rdev);
 	/* FIXME: is this correct ? */
 	r420_pipes_init(rdev);
-	if (r300_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
+	if (rs400_mc_wait_for_idle(rdev)) {
+		printk(KERN_WARNING "rs400: Failed to wait MC idle while "
+		       "programming pipes. Bad things might happen. %08x\n", RREG32(0x150));
 	}
 }
 
@@ -370,8 +386,8 @@
 	r100_mc_stop(rdev, &save);
 
 	/* Wait for mc idle */
-	if (r300_mc_wait_for_idle(rdev))
-		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	if (rs400_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "rs400: Wait MC idle timeout before updating MC.\n");
 	WREG32(R_000148_MC_FB_LOCATION,
 		S_000148_MC_FB_START(rdev->mc.vram_start >> 16) |
 		S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
@@ -448,7 +464,6 @@
 
 void rs400_fini(struct radeon_device *rdev)
 {
-	rs400_suspend(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -527,7 +542,6 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		rs400_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index d525575..c381856 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -610,7 +610,6 @@
 
 void rs600_fini(struct radeon_device *rdev)
 {
-	rs600_suspend(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -689,7 +688,6 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		rs600_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index cd31da9..06e2771 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -676,7 +676,6 @@
 
 void rs690_fini(struct radeon_device *rdev)
 {
-	rs690_suspend(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -756,7 +755,6 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		rs690_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 6275671..0e1e6b8 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -537,7 +537,6 @@
 
 void rv515_fini(struct radeon_device *rdev)
 {
-	rv515_suspend(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -615,13 +614,12 @@
 	if (r) {
 		/* Somethings want wront with the accel init stop accel */
 		dev_err(rdev->dev, "Disabling GPU acceleration\n");
-		rv515_suspend(rdev);
 		r100_cp_fini(rdev);
 		r100_wb_fini(rdev);
 		r100_ib_fini(rdev);
+		radeon_irq_kms_fini(rdev);
 		rv370_pcie_gart_fini(rdev);
 		radeon_agp_fini(rdev);
-		radeon_irq_kms_fini(rdev);
 		rdev->accel_working = false;
 	}
 	return 0;
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 59c7124..0302167 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -549,9 +549,12 @@
 
 	gb_tiling_config |= BANK_SWAPS(1);
 
-	backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes,
-							rdev->config.rv770.max_backends,
-							(0xff << rdev->config.rv770.max_backends) & 0xff);
+	if (rdev->family == CHIP_RV740)
+		backend_map = 0x28;
+	else
+		backend_map = r700_get_tile_pipe_to_backend_map(rdev->config.rv770.max_tile_pipes,
+								rdev->config.rv770.max_backends,
+								(0xff << rdev->config.rv770.max_backends) & 0xff);
 	gb_tiling_config |= BACKEND_MAP(backend_map);
 
 	cc_gc_shader_pipe_config =
@@ -779,7 +782,6 @@
 	fixed20_12 a;
 	u32 tmp;
 	int chansize, numchan;
-	int r;
 
 	/* Get VRAM informations */
 	rdev->mc.vram_is_ddr = true;
@@ -822,9 +824,6 @@
 		rdev->mc.real_vram_size = rdev->mc.aper_size;
 
 	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r)
-			return r;
 		/* gtt_size is setup by radeon_agp_init */
 		rdev->mc.gtt_location = rdev->mc.agp_base;
 		tmp = 0xFFFFFFFFUL - rdev->mc.agp_base - rdev->mc.gtt_size;
@@ -891,26 +890,25 @@
 			return r;
 	}
 	rv770_gpu_init(rdev);
-
-	if (!rdev->r600_blit.shader_obj) {
-		r = r600_blit_init(rdev);
+	r = r600_blit_init(rdev);
+	if (r) {
+		r600_blit_fini(rdev);
+		rdev->asic->copy = NULL;
+		dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
+	}
+	/* pin copy shader into vram */
+	if (rdev->r600_blit.shader_obj) {
+		r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+		if (unlikely(r != 0))
+			return r;
+		r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
+				&rdev->r600_blit.shader_gpu_addr);
+		radeon_bo_unreserve(rdev->r600_blit.shader_obj);
 		if (r) {
-			DRM_ERROR("radeon: failed blitter (%d).\n", r);
+			DRM_ERROR("failed to pin blit object %d\n", r);
 			return r;
 		}
 	}
-
-	r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
-	if (unlikely(r != 0))
-		return r;
-	r = radeon_bo_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
-			&rdev->r600_blit.shader_gpu_addr);
-	radeon_bo_unreserve(rdev->r600_blit.shader_obj);
-	if (r) {
-		DRM_ERROR("failed to pin blit object %d\n", r);
-		return r;
-	}
-
 	/* Enable IRQ */
 	r = r600_irq_init(rdev);
 	if (r) {
@@ -972,13 +970,16 @@
 	/* FIXME: we should wait for ring to be empty */
 	r700_cp_stop(rdev);
 	rdev->cp.ready = false;
+	r600_irq_suspend(rdev);
 	r600_wb_disable(rdev);
 	rv770_pcie_gart_disable(rdev);
 	/* unpin shaders bo */
-	r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
-	if (likely(r == 0)) {
-		radeon_bo_unpin(rdev->r600_blit.shader_obj);
-		radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+	if (rdev->r600_blit.shader_obj) {
+		r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
+		if (likely(r == 0)) {
+			radeon_bo_unpin(rdev->r600_blit.shader_obj);
+			radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+		}
 	}
 	return 0;
 }
@@ -1037,6 +1038,11 @@
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r)
+			radeon_agp_disable(rdev);
+	}
 	r = rv770_mc_init(rdev);
 	if (r)
 		return r;
@@ -1062,22 +1068,25 @@
 	rdev->accel_working = true;
 	r = rv770_startup(rdev);
 	if (r) {
-		rv770_suspend(rdev);
+		dev_err(rdev->dev, "disabling GPU acceleration\n");
+		r600_cp_fini(rdev);
 		r600_wb_fini(rdev);
-		radeon_ring_fini(rdev);
+		r600_irq_fini(rdev);
+		radeon_irq_kms_fini(rdev);
 		rv770_pcie_gart_fini(rdev);
 		rdev->accel_working = false;
 	}
 	if (rdev->accel_working) {
 		r = radeon_ib_pool_init(rdev);
 		if (r) {
-			DRM_ERROR("radeon: failed initializing IB pool (%d).\n", r);
+			dev_err(rdev->dev, "IB initialization failed (%d).\n", r);
 			rdev->accel_working = false;
-		}
-		r = r600_ib_test(rdev);
-		if (r) {
-			DRM_ERROR("radeon: failed testing IB (%d).\n", r);
-			rdev->accel_working = false;
+		} else {
+			r = r600_ib_test(rdev);
+			if (r) {
+				dev_err(rdev->dev, "IB test failed (%d).\n", r);
+				rdev->accel_working = false;
+			}
 		}
 	}
 	return 0;
@@ -1085,13 +1094,11 @@
 
 void rv770_fini(struct radeon_device *rdev)
 {
-	rv770_suspend(rdev);
-
 	r600_blit_fini(rdev);
+	r600_cp_fini(rdev);
+	r600_wb_fini(rdev);
 	r600_irq_fini(rdev);
 	radeon_irq_kms_fini(rdev);
-	radeon_ring_fini(rdev);
-	r600_wb_fini(rdev);
 	rv770_pcie_gart_fini(rdev);
 	radeon_gem_fini(rdev);
 	radeon_fence_driver_fini(rdev);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 2920f9a..c7320ce 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -426,7 +426,8 @@
 		    bdev->man[bo->mem.mem_type].gpu_offset;
 		bo->cur_placement = bo->mem.placement;
 		spin_unlock(&bo->lock);
-	}
+	} else
+		bo->offset = 0;
 
 	return 0;
 
@@ -523,52 +524,44 @@
 static int ttm_bo_delayed_delete(struct ttm_bo_device *bdev, bool remove_all)
 {
 	struct ttm_bo_global *glob = bdev->glob;
-	struct ttm_buffer_object *entry, *nentry;
-	struct list_head *list, *next;
-	int ret;
+	struct ttm_buffer_object *entry = NULL;
+	int ret = 0;
 
 	spin_lock(&glob->lru_lock);
-	list_for_each_safe(list, next, &bdev->ddestroy) {
-		entry = list_entry(list, struct ttm_buffer_object, ddestroy);
-		nentry = NULL;
+	if (list_empty(&bdev->ddestroy))
+		goto out_unlock;
 
-		/*
-		 * Protect the next list entry from destruction while we
-		 * unlock the lru_lock.
-		 */
+	entry = list_first_entry(&bdev->ddestroy,
+		struct ttm_buffer_object, ddestroy);
+	kref_get(&entry->list_kref);
 
-		if (next != &bdev->ddestroy) {
-			nentry = list_entry(next, struct ttm_buffer_object,
-					    ddestroy);
+	for (;;) {
+		struct ttm_buffer_object *nentry = NULL;
+
+		if (entry->ddestroy.next != &bdev->ddestroy) {
+			nentry = list_first_entry(&entry->ddestroy,
+				struct ttm_buffer_object, ddestroy);
 			kref_get(&nentry->list_kref);
 		}
-		kref_get(&entry->list_kref);
 
 		spin_unlock(&glob->lru_lock);
 		ret = ttm_bo_cleanup_refs(entry, remove_all);
 		kref_put(&entry->list_kref, ttm_bo_release_list);
+		entry = nentry;
+
+		if (ret || !entry)
+			goto out;
 
 		spin_lock(&glob->lru_lock);
-		if (nentry) {
-			bool next_onlist = !list_empty(next);
-			spin_unlock(&glob->lru_lock);
-			kref_put(&nentry->list_kref, ttm_bo_release_list);
-			spin_lock(&glob->lru_lock);
-			/*
-			 * Someone might have raced us and removed the
-			 * next entry from the list. We don't bother restarting
-			 * list traversal.
-			 */
-
-			if (!next_onlist)
-				break;
-		}
-		if (ret)
+		if (list_empty(&entry->ddestroy))
 			break;
 	}
-	ret = !list_empty(&bdev->ddestroy);
-	spin_unlock(&glob->lru_lock);
 
+out_unlock:
+	spin_unlock(&glob->lru_lock);
+out:
+	if (entry)
+		kref_put(&entry->list_kref, ttm_bo_release_list);
 	return ret;
 }
 
@@ -950,6 +943,14 @@
 		ttm_flag_masked(&cur_flags, placement->busy_placement[i],
 				~TTM_PL_MASK_MEMTYPE);
 
+
+		if (mem_type == TTM_PL_SYSTEM) {
+			mem->mem_type = mem_type;
+			mem->placement = cur_flags;
+			mem->mm_node = NULL;
+			return 0;
+		}
+
 		ret = ttm_bo_mem_force_space(bo, mem_type, placement, mem,
 						interruptible, no_wait);
 		if (ret == 0 && mem->mm_node) {
@@ -1019,6 +1020,12 @@
 			     struct ttm_mem_reg *mem)
 {
 	int i;
+	struct drm_mm_node *node = mem->mm_node;
+
+	if (node && placement->lpfn != 0 &&
+	    (node->start < placement->fpfn ||
+	     node->start + node->size > placement->lpfn))
+		return -1;
 
 	for (i = 0; i < placement->num_placement; i++) {
 		if ((placement->placement[i] & mem->placement &
@@ -1844,6 +1851,9 @@
 	 * anyone tries to access a ttm page.
 	 */
 
+	if (bo->bdev->driver->swap_notify)
+		bo->bdev->driver->swap_notify(bo);
+
 	ret = ttm_tt_swapout(bo->ttm, bo->persistant_swap_storage);
 out:
 
@@ -1864,3 +1874,4 @@
 	while (ttm_bo_swapout(&bdev->glob->shrink) == 0)
 		;
 }
+EXPORT_SYMBOL(ttm_bo_swapout_all);
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 2ecf7d0..5ca37a5 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -53,7 +53,6 @@
 {
 	struct ttm_tt *ttm = bo->ttm;
 	struct ttm_mem_reg *old_mem = &bo->mem;
-	uint32_t save_flags = old_mem->placement;
 	int ret;
 
 	if (old_mem->mem_type != TTM_PL_SYSTEM) {
@@ -62,7 +61,6 @@
 		ttm_flag_masked(&old_mem->placement, TTM_PL_FLAG_SYSTEM,
 				TTM_PL_MASK_MEM);
 		old_mem->mem_type = TTM_PL_SYSTEM;
-		save_flags = old_mem->placement;
 	}
 
 	ret = ttm_tt_set_placement_caching(ttm, new_mem->placement);
@@ -77,7 +75,7 @@
 
 	*old_mem = *new_mem;
 	new_mem->mm_node = NULL;
-	ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
+
 	return 0;
 }
 EXPORT_SYMBOL(ttm_bo_move_ttm);
@@ -219,7 +217,6 @@
 	void *old_iomap;
 	void *new_iomap;
 	int ret;
-	uint32_t save_flags = old_mem->placement;
 	unsigned long i;
 	unsigned long page;
 	unsigned long add = 0;
@@ -270,7 +267,6 @@
 
 	*old_mem = *new_mem;
 	new_mem->mm_node = NULL;
-	ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
 
 	if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && (ttm != NULL)) {
 		ttm_tt_unbind(ttm);
@@ -537,7 +533,6 @@
 	struct ttm_mem_type_manager *man = &bdev->man[new_mem->mem_type];
 	struct ttm_mem_reg *old_mem = &bo->mem;
 	int ret;
-	uint32_t save_flags = old_mem->placement;
 	struct ttm_buffer_object *ghost_obj;
 	void *tmp_obj = NULL;
 
@@ -598,7 +593,7 @@
 
 	*old_mem = *new_mem;
 	new_mem->mm_node = NULL;
-	ttm_flag_masked(&save_flags, new_mem->placement, TTM_PL_MASK_MEMTYPE);
+
 	return 0;
 }
 EXPORT_SYMBOL(ttm_bo_move_accel_cleanup);
diff --git a/drivers/gpu/drm/ttm/ttm_lock.c b/drivers/gpu/drm/ttm/ttm_lock.c
index f619ebc..3d172ef 100644
--- a/drivers/gpu/drm/ttm/ttm_lock.c
+++ b/drivers/gpu/drm/ttm/ttm_lock.c
@@ -288,6 +288,7 @@
 	wake_up_all(&lock->queue);
 	spin_unlock(&lock->lock);
 }
+EXPORT_SYMBOL(ttm_suspend_unlock);
 
 static bool __ttm_suspend_lock(struct ttm_lock *lock)
 {
@@ -309,3 +310,4 @@
 {
 	wait_event(lock->queue, __ttm_suspend_lock(lock));
 }
+EXPORT_SYMBOL(ttm_suspend_lock);
diff --git a/drivers/gpu/drm/ttm/ttm_object.c b/drivers/gpu/drm/ttm/ttm_object.c
index 1099aba..75e9d6f 100644
--- a/drivers/gpu/drm/ttm/ttm_object.c
+++ b/drivers/gpu/drm/ttm/ttm_object.c
@@ -109,8 +109,8 @@
 	struct drm_hash_item hash;
 	struct list_head head;
 	struct kref kref;
-	struct ttm_base_object *obj;
 	enum ttm_ref_type ref_type;
+	struct ttm_base_object *obj;
 	struct ttm_object_file *tfile;
 };
 
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 9c2b1cc..3d47a2c 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -196,23 +196,34 @@
 
 #ifdef CONFIG_X86
 static inline int ttm_tt_set_page_caching(struct page *p,
-					  enum ttm_caching_state c_state)
+					  enum ttm_caching_state c_old,
+					  enum ttm_caching_state c_new)
 {
+	int ret = 0;
+
 	if (PageHighMem(p))
 		return 0;
 
-	switch (c_state) {
-	case tt_cached:
-		return set_pages_wb(p, 1);
-	case tt_wc:
-	    return set_memory_wc((unsigned long) page_address(p), 1);
-	default:
-		return set_pages_uc(p, 1);
+	if (c_old != tt_cached) {
+		/* p isn't in the default caching state, set it to
+		 * writeback first to free its current memtype. */
+
+		ret = set_pages_wb(p, 1);
+		if (ret)
+			return ret;
 	}
+
+	if (c_new == tt_wc)
+		ret = set_memory_wc((unsigned long) page_address(p), 1);
+	else if (c_new == tt_uncached)
+		ret = set_pages_uc(p, 1);
+
+	return ret;
 }
 #else /* CONFIG_X86 */
 static inline int ttm_tt_set_page_caching(struct page *p,
-					  enum ttm_caching_state c_state)
+					  enum ttm_caching_state c_old,
+					  enum ttm_caching_state c_new)
 {
 	return 0;
 }
@@ -245,7 +256,9 @@
 	for (i = 0; i < ttm->num_pages; ++i) {
 		cur_page = ttm->pages[i];
 		if (likely(cur_page != NULL)) {
-			ret = ttm_tt_set_page_caching(cur_page, c_state);
+			ret = ttm_tt_set_page_caching(cur_page,
+						      ttm->caching_state,
+						      c_state);
 			if (unlikely(ret != 0))
 				goto out_err;
 		}
@@ -259,7 +272,7 @@
 	for (j = 0; j < i; ++j) {
 		cur_page = ttm->pages[j];
 		if (likely(cur_page != NULL)) {
-			(void)ttm_tt_set_page_caching(cur_page,
+			(void)ttm_tt_set_page_caching(cur_page, c_state,
 						      ttm->caching_state);
 		}
 	}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
index d6f2d2b..825ebe3 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_buffer.c
@@ -48,6 +48,15 @@
 	.busy_placement = &vram_placement_flags
 };
 
+struct ttm_placement vmw_vram_sys_placement = {
+	.fpfn = 0,
+	.lpfn = 0,
+	.num_placement = 1,
+	.placement = &vram_placement_flags,
+	.num_busy_placement = 1,
+	.busy_placement = &sys_placement_flags
+};
+
 struct ttm_placement vmw_vram_ne_placement = {
 	.fpfn = 0,
 	.lpfn = 0,
@@ -172,6 +181,18 @@
 	return 0;
 }
 
+static void vmw_move_notify(struct ttm_buffer_object *bo,
+		     struct ttm_mem_reg *new_mem)
+{
+	if (new_mem->mem_type != TTM_PL_SYSTEM)
+		vmw_dmabuf_gmr_unbind(bo);
+}
+
+static void vmw_swap_notify(struct ttm_buffer_object *bo)
+{
+	vmw_dmabuf_gmr_unbind(bo);
+}
+
 /**
  * FIXME: We're using the old vmware polling method to sync.
  * Do this with fences instead.
@@ -225,5 +246,7 @@
 	.sync_obj_wait = vmw_sync_obj_wait,
 	.sync_obj_flush = vmw_sync_obj_flush,
 	.sync_obj_unref = vmw_sync_obj_unref,
-	.sync_obj_ref = vmw_sync_obj_ref
+	.sync_obj_ref = vmw_sync_obj_ref,
+	.move_notify = vmw_move_notify,
+	.swap_notify = vmw_swap_notify
 };
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 1db1ef3..0c9c081 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -147,6 +147,8 @@
 
 static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
 static void vmw_master_init(struct vmw_master *);
+static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
+			      void *ptr);
 
 static void vmw_print_capabilities(uint32_t capabilities)
 {
@@ -207,6 +209,7 @@
 {
 	struct vmw_private *dev_priv;
 	int ret;
+	uint32_t svga_id;
 
 	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
 	if (unlikely(dev_priv == NULL)) {
@@ -217,6 +220,7 @@
 
 	dev_priv->dev = dev;
 	dev_priv->vmw_chipset = chipset;
+	dev_priv->last_read_sequence = (uint32_t) -100;
 	mutex_init(&dev_priv->hw_mutex);
 	mutex_init(&dev_priv->cmdbuf_mutex);
 	rwlock_init(&dev_priv->resource_lock);
@@ -236,6 +240,16 @@
 	dev_priv->mmio_start = pci_resource_start(dev->pdev, 2);
 
 	mutex_lock(&dev_priv->hw_mutex);
+
+	vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
+	svga_id = vmw_read(dev_priv, SVGA_REG_ID);
+	if (svga_id != SVGA_ID_2) {
+		ret = -ENOSYS;
+		DRM_ERROR("Unsuported SVGA ID 0x%x\n", svga_id);
+		mutex_unlock(&dev_priv->hw_mutex);
+		goto out_err0;
+	}
+
 	dev_priv->capabilities = vmw_read(dev_priv, SVGA_REG_CAPABILITIES);
 
 	if (dev_priv->capabilities & SVGA_CAP_GMR) {
@@ -334,22 +348,24 @@
 		 */
 
 		DRM_INFO("It appears like vesafb is loaded. "
-			 "Ignore above error if any. Entering stealth mode.\n");
+			 "Ignore above error if any.\n");
 		ret = pci_request_region(dev->pdev, 2, "vmwgfx stealth probe");
 		if (unlikely(ret != 0)) {
 			DRM_ERROR("Failed reserving the SVGA MMIO resource.\n");
 			goto out_no_device;
 		}
-		vmw_kms_init(dev_priv);
-		vmw_overlay_init(dev_priv);
-	} else {
-		ret = vmw_request_device(dev_priv);
-		if (unlikely(ret != 0))
-			goto out_no_device;
-		vmw_kms_init(dev_priv);
-		vmw_overlay_init(dev_priv);
-		vmw_fb_init(dev_priv);
 	}
+	ret = vmw_request_device(dev_priv);
+	if (unlikely(ret != 0))
+		goto out_no_device;
+	vmw_kms_init(dev_priv);
+	vmw_overlay_init(dev_priv);
+	vmw_fb_init(dev_priv);
+
+	dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
+	register_pm_notifier(&dev_priv->pm_nb);
+
+	DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n");
 
 	return 0;
 
@@ -385,17 +401,17 @@
 
 	DRM_INFO(VMWGFX_DRIVER_NAME " unload.\n");
 
-	if (!dev_priv->stealth) {
-		vmw_fb_close(dev_priv);
-		vmw_kms_close(dev_priv);
-		vmw_overlay_close(dev_priv);
-		vmw_release_device(dev_priv);
-		pci_release_regions(dev->pdev);
-	} else {
-		vmw_kms_close(dev_priv);
-		vmw_overlay_close(dev_priv);
+	unregister_pm_notifier(&dev_priv->pm_nb);
+
+	vmw_fb_close(dev_priv);
+	vmw_kms_close(dev_priv);
+	vmw_overlay_close(dev_priv);
+	vmw_release_device(dev_priv);
+	if (dev_priv->stealth)
 		pci_release_region(dev->pdev, 2);
-	}
+	else
+		pci_release_regions(dev->pdev);
+
 	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
 		drm_irq_uninstall(dev_priv->dev);
 	if (dev->devname == vmw_devname)
@@ -564,11 +580,6 @@
 	int ret = 0;
 
 	DRM_INFO("Master set.\n");
-	if (dev_priv->stealth) {
-		ret = vmw_request_device(dev_priv);
-		if (unlikely(ret != 0))
-			return ret;
-	}
 
 	if (active) {
 		BUG_ON(active != &dev_priv->fbdev_master);
@@ -628,18 +639,11 @@
 
 	ttm_lock_set_kill(&vmaster->lock, true, SIGTERM);
 
-	if (dev_priv->stealth) {
-		ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM);
-		if (unlikely(ret != 0))
-			DRM_ERROR("Unable to clean VRAM on master drop.\n");
-		vmw_release_device(dev_priv);
-	}
 	dev_priv->active_master = &dev_priv->fbdev_master;
 	ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM);
 	ttm_vt_unlock(&dev_priv->fbdev_master.lock);
 
-	if (!dev_priv->stealth)
-		vmw_fb_on(dev_priv);
+	vmw_fb_on(dev_priv);
 }
 
 
@@ -650,6 +654,57 @@
 	drm_put_dev(dev);
 }
 
+static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
+			      void *ptr)
+{
+	struct vmw_private *dev_priv =
+		container_of(nb, struct vmw_private, pm_nb);
+	struct vmw_master *vmaster = dev_priv->active_master;
+
+	switch (val) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		ttm_suspend_lock(&vmaster->lock);
+
+		/**
+		 * This empties VRAM and unbinds all GMR bindings.
+		 * Buffer contents is moved to swappable memory.
+		 */
+		ttm_bo_swapout_all(&dev_priv->bdev);
+		break;
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		ttm_suspend_unlock(&vmaster->lock);
+		break;
+	case PM_RESTORE_PREPARE:
+		break;
+	case PM_POST_RESTORE:
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+/**
+ * These might not be needed with the virtual SVGA device.
+ */
+
+int vmw_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+	return 0;
+}
+
+int vmw_pci_resume(struct pci_dev *pdev)
+{
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	return pci_enable_device(pdev);
+}
+
 static struct drm_driver driver = {
 	.driver_features = DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
 	DRIVER_MODESET,
@@ -689,7 +744,9 @@
 		       .name = VMWGFX_DRIVER_NAME,
 		       .id_table = vmw_pci_id_list,
 		       .probe = vmw_probe,
-		       .remove = vmw_remove
+		       .remove = vmw_remove,
+		       .suspend = vmw_pci_suspend,
+		       .resume = vmw_pci_resume
 		       },
 	.name = VMWGFX_DRIVER_NAME,
 	.desc = VMWGFX_DRIVER_DESC,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index e61bd85..356dc93 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -32,16 +32,17 @@
 #include "drmP.h"
 #include "vmwgfx_drm.h"
 #include "drm_hashtab.h"
+#include "linux/suspend.h"
 #include "ttm/ttm_bo_driver.h"
 #include "ttm/ttm_object.h"
 #include "ttm/ttm_lock.h"
 #include "ttm/ttm_execbuf_util.h"
 #include "ttm/ttm_module.h"
 
-#define VMWGFX_DRIVER_DATE "20090724"
-#define VMWGFX_DRIVER_MAJOR 0
-#define VMWGFX_DRIVER_MINOR 1
-#define VMWGFX_DRIVER_PATCHLEVEL 2
+#define VMWGFX_DRIVER_DATE "20100209"
+#define VMWGFX_DRIVER_MAJOR 1
+#define VMWGFX_DRIVER_MINOR 0
+#define VMWGFX_DRIVER_PATCHLEVEL 0
 #define VMWGFX_FILE_PAGE_OFFSET 0x00100000
 #define VMWGFX_FIFO_STATIC_SIZE (1024*1024)
 #define VMWGFX_MAX_RELOCATIONS 2048
@@ -95,6 +96,8 @@
 	struct drm_vmw_size *sizes;
 	uint32_t num_sizes;
 
+	bool scanout;
+
 	/* TODO so far just a extra pointer */
 	struct vmw_cursor_snooper snooper;
 };
@@ -110,6 +113,7 @@
 	unsigned long static_buffer_size;
 	bool using_bounce_buffer;
 	uint32_t capabilities;
+	struct mutex fifo_mutex;
 	struct rw_semaphore rwsem;
 };
 
@@ -210,7 +214,7 @@
 	 * Fencing and IRQs.
 	 */
 
-	uint32_t fence_seq;
+	atomic_t fence_seq;
 	wait_queue_head_t fence_queue;
 	wait_queue_head_t fifo_queue;
 	atomic_t fence_queue_waiters;
@@ -258,6 +262,7 @@
 
 	struct vmw_master *active_master;
 	struct vmw_master fbdev_master;
+	struct notifier_block pm_nb;
 };
 
 static inline struct vmw_private *vmw_priv(struct drm_device *dev)
@@ -353,6 +358,7 @@
 				       struct vmw_dma_buffer *bo);
 extern int vmw_dmabuf_from_vram(struct vmw_private *vmw_priv,
 				struct vmw_dma_buffer *bo);
+extern void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo);
 extern int vmw_stream_claim_ioctl(struct drm_device *dev, void *data,
 				  struct drm_file *file_priv);
 extern int vmw_stream_unref_ioctl(struct drm_device *dev, void *data,
@@ -386,6 +392,7 @@
 			       uint32_t *sequence);
 extern void vmw_fifo_ping_host(struct vmw_private *dev_priv, uint32_t reason);
 extern int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma);
+extern bool vmw_fifo_have_3d(struct vmw_private *dev_priv);
 
 /**
  * TTM glue - vmwgfx_ttm_glue.c
@@ -401,6 +408,7 @@
 
 extern struct ttm_placement vmw_vram_placement;
 extern struct ttm_placement vmw_vram_ne_placement;
+extern struct ttm_placement vmw_vram_sys_placement;
 extern struct ttm_placement vmw_sys_placement;
 extern struct ttm_bo_driver vmw_bo_driver;
 extern int vmw_dma_quiescent(struct drm_device *dev);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index 2e92da5..0897359 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -182,25 +182,19 @@
 	return vmw_cmd_sid_check(dev_priv, sw_context, &cmd->body.sid);
 }
 
-static int vmw_cmd_dma(struct vmw_private *dev_priv,
-		       struct vmw_sw_context *sw_context,
-		       SVGA3dCmdHeader *header)
+static int vmw_translate_guest_ptr(struct vmw_private *dev_priv,
+				   struct vmw_sw_context *sw_context,
+				   SVGAGuestPtr *ptr,
+				   struct vmw_dma_buffer **vmw_bo_p)
 {
-	uint32_t handle;
 	struct vmw_dma_buffer *vmw_bo = NULL;
 	struct ttm_buffer_object *bo;
-	struct vmw_surface *srf = NULL;
-	struct vmw_dma_cmd {
-		SVGA3dCmdHeader header;
-		SVGA3dCmdSurfaceDMA dma;
-	} *cmd;
+	uint32_t handle = ptr->gmrId;
 	struct vmw_relocation *reloc;
-	int ret;
 	uint32_t cur_validate_node;
 	struct ttm_validate_buffer *val_buf;
+	int ret;
 
-	cmd = container_of(header, struct vmw_dma_cmd, header);
-	handle = cmd->dma.guest.ptr.gmrId;
 	ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Could not find or use GMR region.\n");
@@ -209,14 +203,14 @@
 	bo = &vmw_bo->base;
 
 	if (unlikely(sw_context->cur_reloc >= VMWGFX_MAX_RELOCATIONS)) {
-		DRM_ERROR("Max number of DMA commands per submission"
+		DRM_ERROR("Max number relocations per submission"
 			  " exceeded\n");
 		ret = -EINVAL;
 		goto out_no_reloc;
 	}
 
 	reloc = &sw_context->relocs[sw_context->cur_reloc++];
-	reloc->location = &cmd->dma.guest.ptr;
+	reloc->location = ptr;
 
 	cur_validate_node = vmw_dmabuf_validate_node(bo, sw_context->cur_val_buf);
 	if (unlikely(cur_validate_node >= VMWGFX_MAX_GMRS)) {
@@ -234,7 +228,89 @@
 		list_add_tail(&val_buf->head, &sw_context->validate_nodes);
 		++sw_context->cur_val_buf;
 	}
+	*vmw_bo_p = vmw_bo;
+	return 0;
 
+out_no_reloc:
+	vmw_dmabuf_unreference(&vmw_bo);
+	vmw_bo_p = NULL;
+	return ret;
+}
+
+static int vmw_cmd_end_query(struct vmw_private *dev_priv,
+			     struct vmw_sw_context *sw_context,
+			     SVGA3dCmdHeader *header)
+{
+	struct vmw_dma_buffer *vmw_bo;
+	struct vmw_query_cmd {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdEndQuery q;
+	} *cmd;
+	int ret;
+
+	cmd = container_of(header, struct vmw_query_cmd, header);
+	ret = vmw_cmd_cid_check(dev_priv, sw_context, header);
+	if (unlikely(ret != 0))
+		return ret;
+
+	ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+				      &cmd->q.guestResult,
+				      &vmw_bo);
+	if (unlikely(ret != 0))
+		return ret;
+
+	vmw_dmabuf_unreference(&vmw_bo);
+	return 0;
+}
+
+static int vmw_cmd_wait_query(struct vmw_private *dev_priv,
+			      struct vmw_sw_context *sw_context,
+			      SVGA3dCmdHeader *header)
+{
+	struct vmw_dma_buffer *vmw_bo;
+	struct vmw_query_cmd {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdWaitForQuery q;
+	} *cmd;
+	int ret;
+
+	cmd = container_of(header, struct vmw_query_cmd, header);
+	ret = vmw_cmd_cid_check(dev_priv, sw_context, header);
+	if (unlikely(ret != 0))
+		return ret;
+
+	ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+				      &cmd->q.guestResult,
+				      &vmw_bo);
+	if (unlikely(ret != 0))
+		return ret;
+
+	vmw_dmabuf_unreference(&vmw_bo);
+	return 0;
+}
+
+
+static int vmw_cmd_dma(struct vmw_private *dev_priv,
+		       struct vmw_sw_context *sw_context,
+		       SVGA3dCmdHeader *header)
+{
+	struct vmw_dma_buffer *vmw_bo = NULL;
+	struct ttm_buffer_object *bo;
+	struct vmw_surface *srf = NULL;
+	struct vmw_dma_cmd {
+		SVGA3dCmdHeader header;
+		SVGA3dCmdSurfaceDMA dma;
+	} *cmd;
+	int ret;
+
+	cmd = container_of(header, struct vmw_dma_cmd, header);
+	ret = vmw_translate_guest_ptr(dev_priv, sw_context,
+				      &cmd->dma.guest.ptr,
+				      &vmw_bo);
+	if (unlikely(ret != 0))
+		return ret;
+
+	bo = &vmw_bo->base;
 	ret = vmw_user_surface_lookup_handle(dev_priv, sw_context->tfile,
 					     cmd->dma.host.sid, &srf);
 	if (ret) {
@@ -379,8 +455,8 @@
 	VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw),
 	VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check),
 	VMW_CMD_DEF(SVGA_3D_CMD_BEGIN_QUERY, &vmw_cmd_cid_check),
-	VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_cid_check),
-	VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_cid_check),
+	VMW_CMD_DEF(SVGA_3D_CMD_END_QUERY, &vmw_cmd_end_query),
+	VMW_CMD_DEF(SVGA_3D_CMD_WAIT_FOR_QUERY, &vmw_cmd_wait_query),
 	VMW_CMD_DEF(SVGA_3D_CMD_PRESENT_READBACK, &vmw_cmd_ok),
 	VMW_CMD_DEF(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN,
 		    &vmw_cmd_blt_surf_screen_check)
@@ -490,10 +566,29 @@
 	if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL)
 		return 0;
 
+	/**
+	 * Put BO in VRAM, only if there is space.
+	 */
+
+	ret = ttm_bo_validate(bo, &vmw_vram_sys_placement, true, false);
+	if (unlikely(ret == -ERESTARTSYS))
+		return ret;
+
+	/**
+	 * Otherwise, set it up as GMR.
+	 */
+
+	if (vmw_dmabuf_gmr(bo) != SVGA_GMR_NULL)
+		return 0;
+
 	ret = vmw_gmr_bind(dev_priv, bo);
 	if (likely(ret == 0 || ret == -ERESTARTSYS))
 		return ret;
 
+	/**
+	 * If that failed, try VRAM again, this time evicting
+	 * previous contents.
+	 */
 
 	ret = ttm_bo_validate(bo, &vmw_vram_placement, true, false);
 	return ret;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index 641dde7..a933670 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -559,6 +559,9 @@
 	info->pixmap.scan_align = 1;
 #endif
 
+	info->aperture_base = vmw_priv->vram_start;
+	info->aperture_size = vmw_priv->vram_size;
+
 	/*
 	 * Dirty & Deferred IO
 	 */
@@ -649,14 +652,6 @@
 	if (unlikely(ret != 0))
 		goto err_unlock;
 
-	if (vmw_bo->gmr_bound) {
-		vmw_gmr_unbind(vmw_priv, vmw_bo->gmr_id);
-		spin_lock(&bo->glob->lru_lock);
-		ida_remove(&vmw_priv->gmr_ida, vmw_bo->gmr_id);
-		spin_unlock(&bo->glob->lru_lock);
-		vmw_bo->gmr_bound = NULL;
-	}
-
 	ret = ttm_bo_validate(bo, &ne_placement, false, false);
 	ttm_bo_unreserve(bo);
 err_unlock:
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index 01feb48..39d43a0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -29,6 +29,25 @@
 #include "drmP.h"
 #include "ttm/ttm_placement.h"
 
+bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
+{
+	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+	uint32_t fifo_min, hwversion;
+
+	fifo_min = ioread32(fifo_mem  + SVGA_FIFO_MIN);
+	if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int))
+		return false;
+
+	hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+	if (hwversion == 0)
+		return false;
+
+	if (hwversion < SVGA3D_HWVERSION_WS65_B1)
+		return false;
+
+	return true;
+}
+
 int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
 {
 	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
@@ -55,6 +74,7 @@
 	fifo->reserved_size = 0;
 	fifo->using_bounce_buffer = false;
 
+	mutex_init(&fifo->fifo_mutex);
 	init_rwsem(&fifo->rwsem);
 
 	/*
@@ -98,8 +118,7 @@
 		 (unsigned int) min,
 		 (unsigned int) fifo->capabilities);
 
-	dev_priv->fence_seq = (uint32_t) -100;
-	dev_priv->last_read_sequence = (uint32_t) -100;
+	atomic_set(&dev_priv->fence_seq, dev_priv->last_read_sequence);
 	iowrite32(dev_priv->last_read_sequence, fifo_mem + SVGA_FIFO_FENCE);
 
 	return vmw_fifo_send_fence(dev_priv, &dummy);
@@ -265,7 +284,7 @@
 	uint32_t reserveable = fifo_state->capabilities & SVGA_FIFO_CAP_RESERVE;
 	int ret;
 
-	down_write(&fifo_state->rwsem);
+	mutex_lock(&fifo_state->fifo_mutex);
 	max = ioread32(fifo_mem + SVGA_FIFO_MAX);
 	min = ioread32(fifo_mem + SVGA_FIFO_MIN);
 	next_cmd = ioread32(fifo_mem + SVGA_FIFO_NEXT_CMD);
@@ -333,7 +352,7 @@
 	}
 out_err:
 	fifo_state->reserved_size = 0;
-	up_write(&fifo_state->rwsem);
+	mutex_unlock(&fifo_state->fifo_mutex);
 	return NULL;
 }
 
@@ -408,6 +427,7 @@
 
 	}
 
+	down_write(&fifo_state->rwsem);
 	if (fifo_state->using_bounce_buffer || reserveable) {
 		next_cmd += bytes;
 		if (next_cmd >= max)
@@ -419,8 +439,9 @@
 	if (reserveable)
 		iowrite32(0, fifo_mem + SVGA_FIFO_RESERVED);
 	mb();
-	vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
 	up_write(&fifo_state->rwsem);
+	vmw_fifo_ping_host(dev_priv, SVGA_SYNC_GENERIC);
+	mutex_unlock(&fifo_state->fifo_mutex);
 }
 
 int vmw_fifo_send_fence(struct vmw_private *dev_priv, uint32_t *sequence)
@@ -433,9 +454,7 @@
 
 	fm = vmw_fifo_reserve(dev_priv, bytes);
 	if (unlikely(fm == NULL)) {
-		down_write(&fifo_state->rwsem);
-		*sequence = dev_priv->fence_seq;
-		up_write(&fifo_state->rwsem);
+		*sequence = atomic_read(&dev_priv->fence_seq);
 		ret = -ENOMEM;
 		(void)vmw_fallback_wait(dev_priv, false, true, *sequence,
 					false, 3*HZ);
@@ -443,7 +462,7 @@
 	}
 
 	do {
-		*sequence = dev_priv->fence_seq++;
+		*sequence = atomic_add_return(1, &dev_priv->fence_seq);
 	} while (*sequence == 0);
 
 	if (!(fifo_state->capabilities & SVGA_FIFO_CAP_FENCE)) {
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
index 5fa6a4e..1c7a316 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -43,11 +43,17 @@
 		param->value = vmw_overlay_num_free_overlays(dev_priv);
 		break;
 	case DRM_VMW_PARAM_3D:
-		param->value = dev_priv->capabilities & SVGA_CAP_3D ? 1 : 0;
+		param->value = vmw_fifo_have_3d(dev_priv) ? 1 : 0;
 		break;
 	case DRM_VMW_PARAM_FIFO_OFFSET:
 		param->value = dev_priv->mmio_start;
 		break;
+	case DRM_VMW_PARAM_HW_CAPS:
+		param->value = dev_priv->capabilities;
+		break;
+	case DRM_VMW_PARAM_FIFO_CAPS:
+		param->value = dev_priv->fifo.capabilities;
+		break;
 	default:
 		DRM_ERROR("Illegal vmwgfx get param request: %d\n",
 			  param->param);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
index d40086f..4d7cb53 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_irq.c
@@ -85,19 +85,12 @@
 		return true;
 
 	/**
-	 * Below is to signal stale fences that have wrapped.
-	 * First, block fence submission.
-	 */
-
-	down_read(&fifo_state->rwsem);
-
-	/**
 	 * Then check if the sequence is higher than what we've actually
 	 * emitted. Then the fence is stale and signaled.
 	 */
 
-	ret = ((dev_priv->fence_seq - sequence) > VMW_FENCE_WRAP);
-	up_read(&fifo_state->rwsem);
+	ret = ((atomic_read(&dev_priv->fence_seq) - sequence)
+	       > VMW_FENCE_WRAP);
 
 	return ret;
 }
@@ -127,7 +120,7 @@
 
 	if (fifo_idle)
 		down_read(&fifo_state->rwsem);
-	signal_seq = dev_priv->fence_seq;
+	signal_seq = atomic_read(&dev_priv->fence_seq);
 	ret = 0;
 
 	for (;;) {
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index b1af76e..31f9afe 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -553,9 +553,7 @@
 	} *cmd;
 	int i, increment = 1;
 
-	if (!num_clips ||
-	    !(dev_priv->fifo.capabilities &
-	      SVGA_FIFO_CAP_SCREEN_OBJECT)) {
+	if (!num_clips) {
 		num_clips = 1;
 		clips = &norect;
 		norect.x1 = norect.y1 = 0;
@@ -574,10 +572,10 @@
 
 	for (i = 0; i < num_clips; i++, clips += increment) {
 		cmd[i].header = cpu_to_le32(SVGA_CMD_UPDATE);
-		cmd[i].body.x = cpu_to_le32(clips[i].x1);
-		cmd[i].body.y = cpu_to_le32(clips[i].y1);
-		cmd[i].body.width = cpu_to_le32(clips[i].x2 - clips[i].x1);
-		cmd[i].body.height = cpu_to_le32(clips[i].y2 - clips[i].y1);
+		cmd[i].body.x = cpu_to_le32(clips->x1);
+		cmd[i].body.y = cpu_to_le32(clips->y1);
+		cmd[i].body.width = cpu_to_le32(clips->x2 - clips->x1);
+		cmd[i].body.height = cpu_to_le32(clips->y2 - clips->y1);
 	}
 
 	vmw_fifo_commit(dev_priv, sizeof(*cmd) * num_clips);
@@ -709,6 +707,9 @@
 	if (ret)
 		goto try_dmabuf;
 
+	if (!surface->scanout)
+		goto err_not_scanout;
+
 	ret = vmw_kms_new_framebuffer_surface(dev_priv, surface, &vfb,
 					      mode_cmd->width, mode_cmd->height);
 
@@ -742,6 +743,13 @@
 	}
 
 	return &vfb->base;
+
+err_not_scanout:
+	DRM_ERROR("surface not marked as scanout\n");
+	/* vmw_user_surface_lookup takes one ref */
+	vmw_surface_unreference(&surface);
+
+	return NULL;
 }
 
 static int vmw_kms_fb_changed(struct drm_device *dev)
@@ -761,10 +769,10 @@
 
 	drm_mode_config_init(dev);
 	dev->mode_config.funcs = &vmw_kms_funcs;
-	dev->mode_config.min_width = 640;
-	dev->mode_config.min_height = 480;
-	dev->mode_config.max_width = 2048;
-	dev->mode_config.max_height = 2048;
+	dev->mode_config.min_width = 1;
+	dev->mode_config.min_height = 1;
+	dev->mode_config.max_width = dev_priv->fb_max_width;
+	dev->mode_config.max_height = dev_priv->fb_max_height;
 
 	ret = vmw_kms_init_legacy_display_system(dev_priv);
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index bb6e6a0..5b6eabe 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -104,7 +104,6 @@
 				  bool pin, bool interruptible)
 {
 	struct ttm_buffer_object *bo = &buf->base;
-	struct ttm_bo_global *glob = bo->glob;
 	struct ttm_placement *overlay_placement = &vmw_vram_placement;
 	int ret;
 
@@ -116,14 +115,6 @@
 	if (unlikely(ret != 0))
 		goto err;
 
-	if (buf->gmr_bound) {
-		vmw_gmr_unbind(dev_priv, buf->gmr_id);
-		spin_lock(&glob->lru_lock);
-		ida_remove(&dev_priv->gmr_ida, buf->gmr_id);
-		spin_unlock(&glob->lru_lock);
-		buf->gmr_bound = NULL;
-	}
-
 	if (pin)
 		overlay_placement = &vmw_vram_ne_placement;
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index c012d59..f8fbbc6 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -574,6 +574,7 @@
 
 	srf->flags = req->flags;
 	srf->format = req->format;
+	srf->scanout = req->scanout;
 	memcpy(srf->mip_levels, req->mip_levels, sizeof(srf->mip_levels));
 	srf->num_sizes = 0;
 	for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
@@ -599,6 +600,26 @@
 	if (unlikely(ret != 0))
 		goto out_err1;
 
+	if (srf->scanout &&
+	    srf->num_sizes == 1 &&
+	    srf->sizes[0].width == 64 &&
+	    srf->sizes[0].height == 64 &&
+	    srf->format == SVGA3D_A8R8G8B8) {
+
+		srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
+		/* clear the image */
+		if (srf->snooper.image) {
+			memset(srf->snooper.image, 0x00, 64 * 64 * 4);
+		} else {
+			DRM_ERROR("Failed to allocate cursor_image\n");
+			ret = -ENOMEM;
+			goto out_err1;
+		}
+	} else {
+		srf->snooper.image = NULL;
+	}
+	srf->snooper.crtc = NULL;
+
 	user_srf->base.shareable = false;
 	user_srf->base.tfile = NULL;
 
@@ -622,24 +643,6 @@
 		return ret;
 	}
 
-	if (srf->flags & (1 << 9) &&
-	    srf->num_sizes == 1 &&
-	    srf->sizes[0].width == 64 &&
-	    srf->sizes[0].height == 64 &&
-	    srf->format == SVGA3D_A8R8G8B8) {
-
-		srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
-		/* clear the image */
-		if (srf->snooper.image)
-			memset(srf->snooper.image, 0x00, 64 * 64 * 4);
-		else
-			DRM_ERROR("Failed to allocate cursor_image\n");
-
-	} else {
-		srf->snooper.image = NULL;
-	}
-	srf->snooper.crtc = NULL;
-
 	rep->sid = user_srf->base.hash.key;
 	if (rep->sid == SVGA3D_INVALID_ID)
 		DRM_ERROR("Created bad Surface ID.\n");
@@ -754,20 +757,29 @@
 	return bo_user_size + page_array_size;
 }
 
-void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo)
+void vmw_dmabuf_gmr_unbind(struct ttm_buffer_object *bo)
 {
 	struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo);
 	struct ttm_bo_global *glob = bo->glob;
 	struct vmw_private *dev_priv =
 		container_of(bo->bdev, struct vmw_private, bdev);
 
-	ttm_mem_global_free(glob->mem_glob, bo->acc_size);
 	if (vmw_bo->gmr_bound) {
 		vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id);
 		spin_lock(&glob->lru_lock);
 		ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id);
 		spin_unlock(&glob->lru_lock);
+		vmw_bo->gmr_bound = false;
 	}
+}
+
+void vmw_dmabuf_bo_free(struct ttm_buffer_object *bo)
+{
+	struct vmw_dma_buffer *vmw_bo = vmw_dma_buffer(bo);
+	struct ttm_bo_global *glob = bo->glob;
+
+	vmw_dmabuf_gmr_unbind(bo);
+	ttm_mem_global_free(glob->mem_glob, bo->acc_size);
 	kfree(vmw_bo);
 }
 
@@ -813,18 +825,10 @@
 static void vmw_user_dmabuf_destroy(struct ttm_buffer_object *bo)
 {
 	struct vmw_user_dma_buffer *vmw_user_bo = vmw_user_dma_buffer(bo);
-	struct vmw_dma_buffer *vmw_bo = &vmw_user_bo->dma;
 	struct ttm_bo_global *glob = bo->glob;
-	struct vmw_private *dev_priv =
-		container_of(bo->bdev, struct vmw_private, bdev);
 
+	vmw_dmabuf_gmr_unbind(bo);
 	ttm_mem_global_free(glob->mem_glob, bo->acc_size);
-	if (vmw_bo->gmr_bound) {
-		vmw_gmr_unbind(dev_priv, vmw_bo->gmr_id);
-		spin_lock(&glob->lru_lock);
-		ida_remove(&dev_priv->gmr_ida, vmw_bo->gmr_id);
-		spin_unlock(&glob->lru_lock);
-	}
 	kfree(vmw_user_bo);
 }
 
@@ -868,7 +872,7 @@
 	}
 
 	ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, req->size,
-			      &vmw_vram_placement, true,
+			      &vmw_vram_sys_placement, true,
 			      &vmw_user_dmabuf_destroy);
 	if (unlikely(ret != 0))
 		return ret;
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 1ac0c93..2f6cf69 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -961,7 +961,7 @@
 		remaining -= 7;
 		pr_devel("client 0x%p called 'target'\n", priv);
 		/* if target is default */
-		if (!strncmp(buf, "default", 7))
+		if (!strncmp(curr_pos, "default", 7))
 			pdev = pci_dev_get(vga_default_device());
 		else {
 			if (!vga_pci_str_to_vars(curr_pos, remaining,
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 4b96e7a..5b4d66d 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -431,6 +431,13 @@
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+			APPLE_ISO_KEYBOARD },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS),
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 80792d3..eabe5f8 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1285,6 +1285,9 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
@@ -1553,6 +1556,7 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3839340e..010368e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -88,6 +88,9 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI	0x0236
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO	0x0237
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS	0x0238
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI  0x0239
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO   0x023a
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241
@@ -166,6 +169,9 @@
 #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
 #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
 
+#define USB_VENDOR_ID_ETT		0x0664
+#define USB_DEVICE_ID_TC5UH		0x0309
+
 #define USB_VENDOR_ID_EZKEY 		0x0518
 #define USB_DEVICE_ID_BTC_8193		0x0002
 
diff --git a/drivers/hid/hid-samsung.c b/drivers/hid/hid-samsung.c
index 5b222ee..510dd13 100644
--- a/drivers/hid/hid-samsung.c
+++ b/drivers/hid/hid-samsung.c
@@ -39,7 +39,17 @@
  *
  * 3. 135 byte report descriptor
  * Report #4 has an array field with logical range 0..17 instead of 1..14.
+ *
+ * 4. 171 byte report descriptor
+ * Report #3 has an array field with logical range 0..1 instead of 1..3.
  */
+static inline void samsung_dev_trace(struct hid_device *hdev,
+		unsigned int rsize)
+{
+	dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
+			"descriptor\n", rsize);
+}
+
 static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int rsize)
 {
@@ -47,8 +57,7 @@
 			rdesc[177] == 0x75 && rdesc[178] == 0x30 &&
 			rdesc[179] == 0x95 && rdesc[180] == 0x01 &&
 			rdesc[182] == 0x40) {
-		dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
-				"descriptor\n", 184);
+		samsung_dev_trace(hdev, 184);
 		rdesc[176] = 0xff;
 		rdesc[178] = 0x08;
 		rdesc[180] = 0x06;
@@ -56,17 +65,21 @@
 	} else
 	if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 &&
 			rdesc[194] == 0x25 && rdesc[195] == 0x12) {
-		dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
-				"descriptor\n", 203);
+		samsung_dev_trace(hdev, 203);
 		rdesc[193] = 0x1;
 		rdesc[195] = 0xf;
 	} else
 	if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 &&
 			rdesc[126] == 0x25 && rdesc[127] == 0x11) {
-		dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
-				"descriptor\n", 135);
+		samsung_dev_trace(hdev, 135);
 		rdesc[125] = 0x1;
 		rdesc[127] = 0xe;
+	} else
+	if (rsize == 171 && rdesc[160] == 0x15 && rdesc[161] == 0x0 &&
+			rdesc[162] == 0x25 && rdesc[163] == 0x01) {
+		samsung_dev_trace(hdev, 171);
+		rdesc[161] = 0x1;
+		rdesc[163] = 0x3;
 	}
 }
 
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 7475421..12dcda5 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -142,6 +142,7 @@
 		wdata->butstate = rw;
 		input_report_key(input, BTN_0, rw & 0x02);
 		input_report_key(input, BTN_1, rw & 0x01);
+		input_report_key(input, BTN_TOOL_FINGER, 0xf0);
 		input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
 		input_sync(input);
 	}
@@ -196,6 +197,9 @@
 	/* Pad */
 	input->evbit[0] |= BIT(EV_MSC);
 	input->mscbit[0] |= BIT(MSC_SERIAL);
+	set_bit(BTN_0, input->keybit);
+	set_bit(BTN_1, input->keybit);
+	set_bit(BTN_TOOL_FINGER, input->keybit);
 
 	/* Distance, rubber and mouse */
 	input->absbit[0] |= BIT(ABS_DISTANCE);
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index a31e77c..b8156b4 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -179,7 +179,7 @@
  *
  * Some, but not all, of these voltages have low/high limits.
  */
-#define ADT7462_VOLT_COUNT	12
+#define ADT7462_VOLT_COUNT	13
 
 #define ADT7462_VENDOR		0x41
 #define ADT7462_DEVICE		0x62
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 1c89d92..fa9708c 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -686,7 +686,6 @@
 		data->fan1_div = 4;
 		break;
 	default:
-		mutex_unlock(&data->update_lock);
 		count = -EINVAL;
 		goto EXIT;
 	}
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 6811346..028284f 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -1329,18 +1329,17 @@
 			&buf, ACPI_TYPE_PACKAGE);
 	if (ret != AE_OK) {
 		dev_dbg(&device->dev, "atk: method MBIF not found\n");
-		err = -ENODEV;
-		goto out;
+	} else {
+		obj = buf.pointer;
+		if (obj->package.count >= 2) {
+			union acpi_object *id = &obj->package.elements[1];
+			if (id->type == ACPI_TYPE_STRING)
+				dev_dbg(&device->dev, "board ID = %s\n",
+					id->string.pointer);
+		}
+		ACPI_FREE(buf.pointer);
 	}
 
-	obj = buf.pointer;
-	if (obj->package.count >= 2 &&
-			obj->package.elements[1].type == ACPI_TYPE_STRING) {
-		dev_dbg(&device->dev, "board ID = %s\n",
-				obj->package.elements[1].string.pointer);
-	}
-	ACPI_FREE(buf.pointer);
-
 	err = atk_probe_if(data);
 	if (err) {
 		dev_err(&device->dev, "No usable hwmon interface detected\n");
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index bd0fc67..fa07282 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -768,6 +768,7 @@
 static int watchdog_open(struct inode *inode, struct file *filp)
 {
 	struct fschmd_data *pos, *data = NULL;
+	int watchdog_is_open;
 
 	/* We get called from drivers/char/misc.c with misc_mtx hold, and we
 	   call misc_register() from fschmd_probe() with watchdog_data_mutex
@@ -782,10 +783,12 @@
 		}
 	}
 	/* Note we can never not have found data, so we don't check for this */
-	kref_get(&data->kref);
+	watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
+	if (!watchdog_is_open)
+		kref_get(&data->kref);
 	mutex_unlock(&watchdog_data_mutex);
 
-	if (test_and_set_bit(0, &data->watchdog_is_open))
+	if (watchdog_is_open)
 		return -EBUSY;
 
 	/* Start the watchdog */
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index cadcbd9..72ff2c4 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -851,17 +851,16 @@
 static int __init lm78_isa_found(unsigned short address)
 {
 	int val, save, found = 0;
+	int port;
 
-	/* We have to request the region in two parts because some
-	   boards declare base+4 to base+7 as a PNP device */
-	if (!request_region(address, 4, "lm78")) {
-		pr_debug("lm78: Failed to request low part of region\n");
-		return 0;
-	}
-	if (!request_region(address + 4, 4, "lm78")) {
-		pr_debug("lm78: Failed to request high part of region\n");
-		release_region(address, 4);
-		return 0;
+	/* Some boards declare base+0 to base+7 as a PNP device, some base+4
+	 * to base+7 and some base+5 to base+6. So we better request each port
+	 * individually for the probing phase. */
+	for (port = address; port < address + LM78_EXTENT; port++) {
+		if (!request_region(port, 1, "lm78")) {
+			pr_debug("lm78: Failed to request port 0x%x\n", port);
+			goto release;
+		}
 	}
 
 #define REALLY_SLOW_IO
@@ -925,8 +924,8 @@
 			val & 0x80 ? "LM79" : "LM78", (int)address);
 
  release:
-	release_region(address + 4, 4);
-	release_region(address, 4);
+	for (port--; port >= address; port--)
+		release_region(port, 1);
 	return found;
 }
 
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 9ca9781..8fa462f 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -488,7 +488,7 @@
 }
 
 /* Restore device to its initial state */
-static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
+static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
 {
 	if ((sio_data->activate & 0x01) == 0) {
 		superio_enter();
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 05f9225..32d4ade 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1793,17 +1793,17 @@
 w83781d_isa_found(unsigned short address)
 {
 	int val, save, found = 0;
+	int port;
 
-	/* We have to request the region in two parts because some
-	   boards declare base+4 to base+7 as a PNP device */
-	if (!request_region(address, 4, "w83781d")) {
-		pr_debug("w83781d: Failed to request low part of region\n");
-		return 0;
-	}
-	if (!request_region(address + 4, 4, "w83781d")) {
-		pr_debug("w83781d: Failed to request high part of region\n");
-		release_region(address, 4);
-		return 0;
+	/* Some boards declare base+0 to base+7 as a PNP device, some base+4
+	 * to base+7 and some base+5 to base+6. So we better request each port
+	 * individually for the probing phase. */
+	for (port = address; port < address + W83781D_EXTENT; port++) {
+		if (!request_region(port, 1, "w83781d")) {
+			pr_debug("w83781d: Failed to request port 0x%x\n",
+				 port);
+			goto release;
+		}
 	}
 
 #define REALLY_SLOW_IO
@@ -1877,8 +1877,8 @@
 			val == 0x30 ? "W83782D" : "W83781D", (int)address);
 
  release:
-	release_region(address + 4, 4);
-	release_region(address, 4);
+	for (port--; port >= address; port--)
+		release_region(port, 1);
 	return found;
 }
 
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index f70f465..4687af4 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -87,9 +87,9 @@
 	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
 
 	timeout = ALI1563_MAX_TIMEOUT;
-	do
+	do {
 		msleep(1);
-	while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+	} while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
 
 	dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
 		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
@@ -157,9 +157,9 @@
 	outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
 
 	timeout = ALI1563_MAX_TIMEOUT;
-	do
+	do {
 		msleep(1);
-	while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+	} while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
 
 	dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
 		"CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index e3654d6..75bf820 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -226,7 +226,6 @@
 		temp = readb(i2c_imx->base + IMX_I2C_I2CR);
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
 		writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
-		i2c_imx->stopped = 1;
 	}
 	if (cpu_is_mx1()) {
 		/*
@@ -236,8 +235,10 @@
 		udelay(i2c_imx->disable_delay);
 	}
 
-	if (!i2c_imx->stopped)
+	if (!i2c_imx->stopped) {
 		i2c_imx_bus_busy(i2c_imx, 0);
+		i2c_imx->stopped = 1;
+	}
 
 	/* Disable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -496,22 +497,23 @@
 	}
 
 	res_size = resource_size(res);
+
+	if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
+		ret = -EBUSY;
+		goto fail0;
+	}
+
 	base = ioremap(res->start, res_size);
 	if (!base) {
 		dev_err(&pdev->dev, "ioremap failed\n");
 		ret = -EIO;
-		goto fail0;
+		goto fail1;
 	}
 
 	i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL);
 	if (!i2c_imx) {
 		dev_err(&pdev->dev, "can't allocate interface\n");
 		ret = -ENOMEM;
-		goto fail1;
-	}
-
-	if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
-		ret = -EBUSY;
 		goto fail2;
 	}
 
@@ -582,11 +584,11 @@
 fail4:
 	clk_put(i2c_imx->clk);
 fail3:
-	release_mem_region(i2c_imx->res->start, resource_size(res));
-fail2:
 	kfree(i2c_imx);
-fail1:
+fail2:
 	iounmap(base);
+fail1:
+	release_mem_region(res->start, resource_size(res));
 fail0:
 	if (pdata && pdata->exit)
 		pdata->exit(&pdev->dev);
@@ -618,8 +620,8 @@
 
 	clk_put(i2c_imx->clk);
 
-	release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
 	iounmap(i2c_imx->base);
+	release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
 	kfree(i2c_imx);
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 0ed68e2..f7346a9 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -75,7 +75,7 @@
 	unsigned long timeout;
 
 	if (irq > -1) {
-		ret = wait_event_interruptible_timeout(pca_wait,
+		ret = wait_event_timeout(pca_wait,
 				pca_isa_readbyte(pd, I2C_PCA_CON)
 				& I2C_PCA_CON_SI, pca_isa_ops.timeout);
 	} else {
@@ -96,7 +96,7 @@
 }
 
 static irqreturn_t pca_handler(int this_irq, void *dev_id) {
-	wake_up_interruptible(&pca_wait);
+	wake_up(&pca_wait);
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index c4df9d4..5b2213d 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -84,7 +84,7 @@
 	unsigned long timeout;
 
 	if (i2c->irq) {
-		ret = wait_event_interruptible_timeout(i2c->wait,
+		ret = wait_event_timeout(i2c->wait,
 			i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
 			& I2C_PCA_CON_SI, i2c->adap.timeout);
 	} else {
@@ -122,7 +122,7 @@
 	if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
 		return IRQ_NONE;
 
-	wake_up_interruptible(&i2c->wait);
+	wake_up(&i2c->wait);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 1e245e9..e56e4b6 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -324,12 +324,12 @@
 	else
 		msleep(1);
 
-	while ((timeout++ < MAX_TIMEOUT) &&
+	while ((++timeout < MAX_TIMEOUT) &&
 	       ((temp = inb_p(SMBHSTSTS)) & 0x01))
 		msleep(1);
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout == MAX_TIMEOUT) {
 		dev_err(&piix4_adapter.dev, "SMBus Timeout!\n");
 		result = -ETIMEDOUT;
 	}
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index b1c050f..e29b6d5 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/module.h>
+#include <linux/types.h>
 
 /* include interfaces to usb layer */
 #include <linux/usb.h>
@@ -31,8 +32,8 @@
 #define CMD_I2C_IO_END		(1<<1)
 
 /* i2c bit delay, default is 10us -> 100kHz */
-static int delay = 10;
-module_param(delay, int, 0);
+static unsigned short delay = 10;
+module_param(delay, ushort, 0);
 MODULE_PARM_DESC(delay, "bit delay in microseconds, "
 		 "e.g. 10 for 100kHz (default is 100kHz)");
 
@@ -109,7 +110,7 @@
 
 static u32 usb_func(struct i2c_adapter *adapter)
 {
-	u32 func;
+	__le32 func;
 
 	/* get functionality from adapter */
 	if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) !=
@@ -118,7 +119,7 @@
 		return 0;
 	}
 
-	return func;
+	return le32_to_cpu(func);
 }
 
 /* This is the actual algorithm we define */
@@ -216,8 +217,7 @@
 		 "i2c-tiny-usb at bus %03d device %03d",
 		 dev->usb_dev->bus->busnum, dev->usb_dev->devnum);
 
-	if (usb_write(&dev->adapter, CMD_SET_DELAY,
-		      cpu_to_le16(delay), 0, NULL, 0) != 0) {
+	if (usb_write(&dev->adapter, CMD_SET_DELAY, delay, 0, NULL, 0) != 0) {
 		dev_err(&dev->adapter.dev,
 			"failure setting delay to %dus\n", delay);
 		retval = -EIO;
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index e4b1543..a84a909 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -165,10 +165,10 @@
 	do {
 		msleep(1);
 		temp = inb_p(SMBHSTSTS);
-	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+	} while ((temp & 0x01) && (++timeout < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
-	if (timeout >= MAX_TIMEOUT) {
+	if (timeout == MAX_TIMEOUT) {
 		result = -ETIMEDOUT;
 		dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
 	}
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0ac2f90..10be7b5 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -248,7 +248,7 @@
 	NULL
 };
 
-const static struct dev_pm_ops i2c_device_pm_ops = {
+static const struct dev_pm_ops i2c_device_pm_ops = {
 	.suspend = i2c_device_pm_suspend,
 	.resume = i2c_device_pm_resume,
 };
@@ -843,6 +843,9 @@
 				 adap->dev.parent);
 #endif
 
+	/* device name is gone after device_unregister */
+	dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
+
 	/* clean up the sysfs representation */
 	init_completion(&adap->dev_released);
 	device_unregister(&adap->dev);
@@ -855,8 +858,6 @@
 	idr_remove(&i2c_adapter_idr, adap->nr);
 	mutex_unlock(&core_lock);
 
-	dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
-
 	/* Clear the device structure in case this adapter is ever going to be
 	   added again */
 	memset(&adap->dev, 0, sizeof(adap->dev));
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index cc9b594..875e34e 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2115,9 +2115,7 @@
 	if (ret)
 		goto err1;
 
-	if (cma_loopback_addr(addr)) {
-		ret = cma_bind_loopback(id_priv);
-	} else if (!cma_zero_addr(addr)) {
+	if (!cma_any_addr(addr)) {
 		ret = rdma_translate_ip(addr, &id->route.addr.dev_addr);
 		if (ret)
 			goto err1;
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index b368406..100da85 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -346,10 +346,8 @@
 	list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) {
 		spin_unlock_irqrestore(&ipath_devs_lock, flags);
 		ret = create_device_files(sb, dd);
-		if (ret) {
-			deactivate_locked_super(sb);
+		if (ret)
 			goto bail;
-		}
 		spin_lock_irqsave(&ipath_devs_lock, flags);
 	}
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index dee6706..258c639 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -59,7 +59,8 @@
 	client->head &= EVDEV_BUFFER_SIZE - 1;
 	spin_unlock(&client->buffer_lock);
 
-	kill_fasync(&client->fasync, SIGIO, POLL_IN);
+	if (event->type == EV_SYN)
+		kill_fasync(&client->fasync, SIGIO, POLL_IN);
 }
 
 /*
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index aa6713b..291d939 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -100,6 +100,12 @@
 	struct input_polled_dev *dev = input_get_drvdata(input);
 
 	cancel_delayed_work_sync(&dev->work);
+	/*
+	 * Clean up work struct to remove references to the workqueue.
+	 * It may be destroyed by the next call. This causes problems
+	 * at next device open-close in case of poll_interval == 0.
+	 */
+	INIT_DELAYED_WORK(&dev->work, dev->work.work.func);
 	input_polldev_stop_workqueue();
 
 	if (dev->close)
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ab06071..86cb2d2 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -24,6 +24,7 @@
 #include <linux/mutex.h>
 #include <linux/rcupdate.h>
 #include <linux/smp_lock.h>
+#include "input-compat.h"
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
 MODULE_DESCRIPTION("Input core");
@@ -45,6 +46,7 @@
 	ABS_MT_TOOL_TYPE,
 	ABS_MT_BLOB_ID,
 	ABS_MT_TRACKING_ID,
+	ABS_MT_PRESSURE,
 	0
 };
 static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
@@ -764,6 +766,40 @@
 	return error;
 }
 
+#ifdef CONFIG_COMPAT
+
+static int input_bits_to_string(char *buf, int buf_size,
+				unsigned long bits, bool skip_empty)
+{
+	int len = 0;
+
+	if (INPUT_COMPAT_TEST) {
+		u32 dword = bits >> 32;
+		if (dword || !skip_empty)
+			len += snprintf(buf, buf_size, "%x ", dword);
+
+		dword = bits & 0xffffffffUL;
+		if (dword || !skip_empty || len)
+			len += snprintf(buf + len, max(buf_size - len, 0),
+					"%x", dword);
+	} else {
+		if (bits || !skip_empty)
+			len += snprintf(buf, buf_size, "%lx", bits);
+	}
+
+	return len;
+}
+
+#else /* !CONFIG_COMPAT */
+
+static int input_bits_to_string(char *buf, int buf_size,
+				unsigned long bits, bool skip_empty)
+{
+	return bits || !skip_empty ?
+		snprintf(buf, buf_size, "%lx", bits) : 0;
+}
+
+#endif
 
 #ifdef CONFIG_PROC_FS
 
@@ -832,14 +868,25 @@
 				   unsigned long *bitmap, int max)
 {
 	int i;
-
-	for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
-		if (bitmap[i])
-			break;
+	bool skip_empty = true;
+	char buf[18];
 
 	seq_printf(seq, "B: %s=", name);
-	for (; i >= 0; i--)
-		seq_printf(seq, "%lx%s", bitmap[i], i > 0 ? " " : "");
+
+	for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+		if (input_bits_to_string(buf, sizeof(buf),
+					 bitmap[i], skip_empty)) {
+			skip_empty = false;
+			seq_printf(seq, "%s%s", buf, i > 0 ? " " : "");
+		}
+	}
+
+	/*
+	 * If no output was produced print a single 0.
+	 */
+	if (skip_empty)
+		seq_puts(seq, "0");
+
 	seq_putc(seq, '\n');
 }
 
@@ -1128,14 +1175,23 @@
 {
 	int i;
 	int len = 0;
+	bool skip_empty = true;
 
-	for (i = BITS_TO_LONGS(max) - 1; i > 0; i--)
-		if (bitmap[i])
-			break;
+	for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) {
+		len += input_bits_to_string(buf + len, max(buf_size - len, 0),
+					    bitmap[i], skip_empty);
+		if (len) {
+			skip_empty = false;
+			if (i > 0)
+				len += snprintf(buf + len, max(buf_size - len, 0), " ");
+		}
+	}
 
-	for (; i >= 0; i--)
-		len += snprintf(buf + len, max(buf_size - len, 0),
-				"%lx%s", bitmap[i], i > 0 ? " " : "");
+	/*
+	 * If no output was produced print a single 0.
+	 */
+	if (len == 0)
+		len = snprintf(buf, buf_size, "%d", 0);
 
 	if (add_cr)
 		len += snprintf(buf + len, max(buf_size - len, 0), "\n");
@@ -1150,7 +1206,8 @@
 {									\
 	struct input_dev *input_dev = to_input_dev(dev);		\
 	int len = input_print_bitmap(buf, PAGE_SIZE,			\
-				     input_dev->bm##bit, ev##_MAX, 1);	\
+				     input_dev->bm##bit, ev##_MAX,	\
+				     true);				\
 	return min_t(int, len, PAGE_SIZE);				\
 }									\
 static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL)
@@ -1214,7 +1271,7 @@
 
 	len = input_print_bitmap(&env->buf[env->buflen - 1],
 				 sizeof(env->buf) - env->buflen,
-				 bitmap, max, 0);
+				 bitmap, max, false);
 	if (len >= (sizeof(env->buf) - env->buflen))
 		return -ENOMEM;
 
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 67c207f..45ac70e 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -277,7 +277,7 @@
 	}
 
 #ifdef RESET_WORKS
-	if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) ||
+	if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) &&
 	    (gf2k->id != (GB(31,2,0) | GB(27,3,2) | GB(24,3,5)))) {
 		err = -ENODEV;
 		goto fail2;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 482cb12..8a28fb7 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -446,7 +446,7 @@
 	}
 
 exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
 		     __func__, retval);
@@ -571,7 +571,7 @@
 		xpad->odata[6] = 0x00;
 		xpad->odata[7] = 0x00;
 		xpad->irq_out->transfer_buffer_length = 8;
-		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+		usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
 	}
 
 	return 0;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 1f5e2ce..7b40562 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -225,8 +225,10 @@
 
 	struct delayed_work event_work;
 	unsigned long event_jiffies;
-	struct mutex event_mutex;
 	unsigned long event_mask;
+
+	/* Serializes reconnect(), attr->set() and event work */
+	struct mutex mutex;
 };
 
 /*
@@ -577,7 +579,7 @@
 {
 	struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
 
-	mutex_lock(&atkbd->event_mutex);
+	mutex_lock(&atkbd->mutex);
 
 	if (!atkbd->enabled) {
 		/*
@@ -596,7 +598,7 @@
 			atkbd_set_repeat_rate(atkbd);
 	}
 
-	mutex_unlock(&atkbd->event_mutex);
+	mutex_unlock(&atkbd->mutex);
 }
 
 /*
@@ -612,7 +614,7 @@
 
 	atkbd->event_jiffies = jiffies;
 	set_bit(event_bit, &atkbd->event_mask);
-	wmb();
+	mb();
 	schedule_delayed_work(&atkbd->event_work, delay);
 }
 
@@ -849,13 +851,20 @@
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 
+	sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
+
 	atkbd_disable(atkbd);
 
-	/* make sure we don't have a command in flight */
+	input_unregister_device(atkbd->dev);
+
+	/*
+	 * Make sure we don't have a command in flight.
+	 * Note that since atkbd->enabled is false event work will keep
+	 * rescheduling itself until it gets canceled and will not try
+	 * accessing freed input device or serio port.
+	 */
 	cancel_delayed_work_sync(&atkbd->event_work);
 
-	sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
-	input_unregister_device(atkbd->dev);
 	serio_close(serio);
 	serio_set_drvdata(serio, NULL);
 	kfree(atkbd);
@@ -1087,7 +1096,7 @@
 	atkbd->dev = dev;
 	ps2_init(&atkbd->ps2dev, serio);
 	INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
-	mutex_init(&atkbd->event_mutex);
+	mutex_init(&atkbd->mutex);
 
 	switch (serio->id.type) {
 
@@ -1160,19 +1169,23 @@
 {
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 	struct serio_driver *drv = serio->drv;
+	int retval = -1;
 
 	if (!atkbd || !drv) {
 		printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
 		return -1;
 	}
 
+	mutex_lock(&atkbd->mutex);
+
 	atkbd_disable(atkbd);
 
 	if (atkbd->write) {
 		if (atkbd_probe(atkbd))
-			return -1;
+			goto out;
+
 		if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
-			return -1;
+			goto out;
 
 		atkbd_activate(atkbd);
 
@@ -1190,8 +1203,11 @@
 	}
 
 	atkbd_enable(atkbd);
+	retval = 0;
 
-	return 0;
+ out:
+	mutex_unlock(&atkbd->mutex);
+	return retval;
 }
 
 static struct serio_device_id atkbd_serio_ids[] = {
@@ -1235,47 +1251,28 @@
 				ssize_t (*handler)(struct atkbd *, char *))
 {
 	struct serio *serio = to_serio_port(dev);
-	int retval;
+	struct atkbd *atkbd = serio_get_drvdata(serio);
 
-	retval = serio_pin_driver(serio);
-	if (retval)
-		return retval;
-
-	if (serio->drv != &atkbd_drv) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	retval = handler((struct atkbd *)serio_get_drvdata(serio), buf);
-
-out:
-	serio_unpin_driver(serio);
-	return retval;
+	return handler(atkbd, buf);
 }
 
 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
 				ssize_t (*handler)(struct atkbd *, const char *, size_t))
 {
 	struct serio *serio = to_serio_port(dev);
-	struct atkbd *atkbd;
+	struct atkbd *atkbd = serio_get_drvdata(serio);
 	int retval;
 
-	retval = serio_pin_driver(serio);
+	retval = mutex_lock_interruptible(&atkbd->mutex);
 	if (retval)
 		return retval;
 
-	if (serio->drv != &atkbd_drv) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	atkbd = serio_get_drvdata(serio);
 	atkbd_disable(atkbd);
 	retval = handler(atkbd, buf, count);
 	atkbd_enable(atkbd);
 
-out:
-	serio_unpin_driver(serio);
+	mutex_unlock(&atkbd->mutex);
+
 	return retval;
 }
 
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index 6e52d85..d410d7a 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -174,6 +174,14 @@
 	struct davinci_ks_platform_data *pdata = pdev->dev.platform_data;
 	int error, i;
 
+	if (pdata->device_enable) {
+		error = pdata->device_enable(dev);
+		if (error < 0) {
+			dev_dbg(dev, "device enable function failed\n");
+			return error;
+		}
+	}
+
 	if (!pdata->keymap) {
 		dev_dbg(dev, "no keymap from pdata\n");
 		return -EINVAL;
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
index 33309fe..c8f5a9a 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/input/misc/winbond-cir.c
@@ -768,7 +768,7 @@
 		return;
 	}
 
-	dev_info(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
+	dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
 		"toggle %u mode %u scan 0x%08X\n",
 		address,
 		command,
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 0d1d334..4f8fe08 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -139,6 +139,7 @@
 /* trackpad finger data size, empirically at least ten fingers */
 #define SIZEOF_FINGER		sizeof(struct tp_finger)
 #define SIZEOF_ALL_FINGERS	(16 * SIZEOF_FINGER)
+#define MAX_FINGER_ORIENTATION	16384
 
 /* device-specific parameters */
 struct bcm5974_param {
@@ -284,6 +285,26 @@
 	input_set_abs_params(input_dev, ABS_Y,
 				0, cfg->y.dim, cfg->y.fuzz, 0);
 
+	/* finger touch area */
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     cfg->w.devmin, cfg->w.devmax, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+			     cfg->w.devmin, cfg->w.devmax, 0, 0);
+	/* finger approach area */
+	input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR,
+			     cfg->w.devmin, cfg->w.devmax, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR,
+			     cfg->w.devmin, cfg->w.devmax, 0, 0);
+	/* finger orientation */
+	input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+			     -MAX_FINGER_ORIENTATION,
+			     MAX_FINGER_ORIENTATION, 0, 0);
+	/* finger position */
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     cfg->x.devmin, cfg->x.devmax, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     cfg->y.devmin, cfg->y.devmax, 0, 0);
+
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
@@ -310,13 +331,29 @@
 	return 0;
 }
 
+static void report_finger_data(struct input_dev *input,
+			       const struct bcm5974_config *cfg,
+			       const struct tp_finger *f)
+{
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR, raw2int(f->force_major));
+	input_report_abs(input, ABS_MT_TOUCH_MINOR, raw2int(f->force_minor));
+	input_report_abs(input, ABS_MT_WIDTH_MAJOR, raw2int(f->size_major));
+	input_report_abs(input, ABS_MT_WIDTH_MINOR, raw2int(f->size_minor));
+	input_report_abs(input, ABS_MT_ORIENTATION,
+			 MAX_FINGER_ORIENTATION - raw2int(f->orientation));
+	input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x));
+	input_report_abs(input, ABS_MT_POSITION_Y,
+			 cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y));
+	input_mt_sync(input);
+}
+
 /* report trackpad data as logical trackpad state */
 static int report_tp_state(struct bcm5974 *dev, int size)
 {
 	const struct bcm5974_config *c = &dev->cfg;
 	const struct tp_finger *f;
 	struct input_dev *input = dev->input;
-	int raw_p, raw_w, raw_x, raw_y, raw_n;
+	int raw_p, raw_w, raw_x, raw_y, raw_n, i;
 	int ptest, origin, ibt = 0, nmin = 0, nmax = 0;
 	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
@@ -329,6 +366,11 @@
 
 	/* always track the first finger; when detached, start over */
 	if (raw_n) {
+
+		/* report raw trackpad data */
+		for (i = 0; i < raw_n; i++)
+			report_finger_data(input, c, &f[i]);
+
 		raw_p = raw2int(f->force_major);
 		raw_w = raw2int(f->size_major);
 		raw_x = raw2int(f->abs_x);
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 6d7aa10..7c1d7d4 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -53,6 +53,12 @@
 	{
 		/* LifeBook B */
 		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "Lifebook B Series"),
+		},
+	},
+	{
+		/* LifeBook B */
+		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
 		},
 	},
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 401ac6b..d8c0c8d 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -627,8 +627,15 @@
 		synaptics_hardware = true;
 
 		if (max_proto > PSMOUSE_IMEX) {
-			if (!set_properties || synaptics_init(psmouse) == 0)
+/*
+ * Try activating protocol, but check if support is enabled first, since
+ * we try detecting Synaptics even when protocol is disabled.
+ */
+			if (synaptics_supported() &&
+			    (!set_properties || synaptics_init(psmouse) == 0)) {
 				return PSMOUSE_SYNAPTICS;
+			}
+
 /*
  * Some Synaptics touchpads can emulate extended protocols (like IMPS/2).
  * Unfortunately Logitech/Genius probes confuse some firmware versions so
@@ -683,19 +690,6 @@
 		max_proto = PSMOUSE_IMEX;
 	}
 
-/*
- * Try Finger Sensing Pad
- */
-	if (max_proto > PSMOUSE_IMEX) {
-		if (fsp_detect(psmouse, set_properties) == 0) {
-			if (!set_properties || fsp_init(psmouse) == 0)
-				return PSMOUSE_FSP;
-/*
- * Init failed, try basic relative protocols
- */
-			max_proto = PSMOUSE_IMEX;
-		}
-	}
 
 	if (max_proto > PSMOUSE_IMEX) {
 		if (genius_detect(psmouse, set_properties) == 0)
@@ -712,6 +706,21 @@
 	}
 
 /*
+ * Try Finger Sensing Pad. We do it here because its probe upsets
+ * Trackpoint devices (causing TP_READ_ID command to time out).
+ */
+	if (max_proto > PSMOUSE_IMEX) {
+		if (fsp_detect(psmouse, set_properties) == 0) {
+			if (!set_properties || fsp_init(psmouse) == 0)
+				return PSMOUSE_FSP;
+/*
+ * Init failed, try basic relative protocols
+ */
+			max_proto = PSMOUSE_IMEX;
+		}
+	}
+
+/*
  * Reset to defaults in case the device got confused by extended
  * protocol probes. Note that we follow up with full reset because
  * some mice put themselves to sleep when they see PSMOUSE_RESET_DIS.
@@ -1132,7 +1141,14 @@
 		psmouse_deactivate(parent);
 	}
 
-	psmouse_deactivate(psmouse);
+	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+
+	/*
+	 * Disable stream mode so cleanup routine can proceed undisturbed.
+	 */
+	if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE))
+		printk(KERN_WARNING "psmouse.c: Failed to disable mouse on %s\n",
+			psmouse->ps2dev.serio->phys);
 
 	if (psmouse->cleanup)
 		psmouse->cleanup(psmouse);
@@ -1450,24 +1466,10 @@
 	struct serio *serio = to_serio_port(dev);
 	struct psmouse_attribute *attr = to_psmouse_attr(devattr);
 	struct psmouse *psmouse;
-	int retval;
-
-	retval = serio_pin_driver(serio);
-	if (retval)
-		return retval;
-
-	if (serio->drv != &psmouse_drv) {
-		retval = -ENODEV;
-		goto out;
-	}
 
 	psmouse = serio_get_drvdata(serio);
 
-	retval = attr->show(psmouse, attr->data, buf);
-
-out:
-	serio_unpin_driver(serio);
-	return retval;
+	return attr->show(psmouse, attr->data, buf);
 }
 
 ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *devattr,
@@ -1478,18 +1480,9 @@
 	struct psmouse *psmouse, *parent = NULL;
 	int retval;
 
-	retval = serio_pin_driver(serio);
-	if (retval)
-		return retval;
-
-	if (serio->drv != &psmouse_drv) {
-		retval = -ENODEV;
-		goto out_unpin;
-	}
-
 	retval = mutex_lock_interruptible(&psmouse_mutex);
 	if (retval)
-		goto out_unpin;
+		goto out;
 
 	psmouse = serio_get_drvdata(serio);
 
@@ -1519,8 +1512,7 @@
 
  out_unlock:
 	mutex_unlock(&psmouse_mutex);
- out_unpin:
-	serio_unpin_driver(serio);
+ out:
 	return retval;
 }
 
@@ -1582,9 +1574,7 @@
 		}
 
 		mutex_unlock(&psmouse_mutex);
-		serio_unpin_driver(serio);
 		serio_unregister_child_port(serio);
-		serio_pin_driver_uninterruptible(serio);
 		mutex_lock(&psmouse_mutex);
 
 		if (serio->drv != &psmouse_drv) {
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 77b9fd0..81a6b81 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -2,7 +2,7 @@
  * Finger Sensing Pad PS/2 mouse driver.
  *
  * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -658,9 +658,9 @@
 			if (packet[3] & BIT(1))
 				button_status |= 0x0f;	/* wheel up */
 			if (packet[3] & BIT(2))
-				button_status |= BIT(5);/* horizontal left */
+				button_status |= BIT(4);/* horizontal left */
 			if (packet[3] & BIT(3))
-				button_status |= BIT(4);/* horizontal right */
+				button_status |= BIT(5);/* horizontal right */
 			/* push back to packet queue */
 			if (button_status != 0)
 				packet[3] = button_status;
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 05689e7..d3f5243 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -743,6 +743,11 @@
 	return -1;
 }
 
+bool synaptics_supported(void)
+{
+	return true;
+}
+
 #else /* CONFIG_MOUSE_PS2_SYNAPTICS */
 
 void __init synaptics_module_init(void)
@@ -754,5 +759,10 @@
 	return -ENOSYS;
 }
 
+bool synaptics_supported(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
 
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 838e7f2..f0f40a3 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -109,5 +109,6 @@
 int synaptics_detect(struct psmouse *psmouse, bool set_properties);
 int synaptics_init(struct psmouse *psmouse);
 void synaptics_reset(struct psmouse *psmouse);
+bool synaptics_supported(void);
 
 #endif /* _SYNAPTICS_H */
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 64b688d..2a5982e 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -524,6 +524,13 @@
  */
 static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
 	{
+		/* Acer Aspire 5610 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
+		},
+	},
+	{
 		/* Acer Aspire 5630 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index d84a36e..b54aee7 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1161,9 +1161,17 @@
 	return 0;
 }
 
+static int i8042_pm_thaw(struct device *dev)
+{
+	i8042_interrupt(0, NULL);
+
+	return 0;
+}
+
 static const struct dev_pm_ops i8042_pm_ops = {
 	.suspend	= i8042_pm_reset,
 	.resume		= i8042_pm_restore,
+	.thaw		= i8042_pm_thaw,
 	.poweroff	= i8042_pm_reset,
 	.restore	= i8042_pm_restore,
 };
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index c21e6d3..794d070 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -47,6 +47,7 @@
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/ad7879.h>
 
@@ -132,7 +133,9 @@
 	struct input_dev	*input;
 	struct work_struct	work;
 	struct timer_list	timer;
-
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip	gc;
+#endif
 	struct mutex		mutex;
 	unsigned		disabled:1;	/* P: mutex */
 
@@ -150,11 +153,9 @@
 	u8			median;
 	u16			x_plate_ohms;
 	u16			pressure_max;
-	u16			gpio_init;
 	u16			cmd_crtl1;
 	u16			cmd_crtl2;
 	u16			cmd_crtl3;
-	unsigned		gpio:1;
 };
 
 static int ad7879_read(bus_device *, u8);
@@ -237,24 +238,6 @@
 
 static void ad7879_setup(struct ad7879 *ts)
 {
-	ts->cmd_crtl3 = AD7879_YPLUS_BIT |
-			AD7879_XPLUS_BIT |
-			AD7879_Z2_BIT |
-			AD7879_Z1_BIT |
-			AD7879_TEMPMASK_BIT |
-			AD7879_AUXVBATMASK_BIT |
-			AD7879_GPIOALERTMASK_BIT;
-
-	ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
-			AD7879_AVG(ts->averaging) |
-			AD7879_MFS(ts->median) |
-			AD7879_FCD(ts->first_conversion_delay) |
-			ts->gpio_init;
-
-	ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
-			AD7879_ACQ(ts->acquisition_time) |
-			AD7879_TMR(ts->pen_down_acc_interval);
-
 	ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
 	ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3);
 	ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1);
@@ -324,42 +307,8 @@
 
 static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
 
-static ssize_t ad7879_gpio_show(struct device *dev,
-				     struct device_attribute *attr, char *buf)
-{
-	struct ad7879 *ts = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%u\n", ts->gpio);
-}
-
-static ssize_t ad7879_gpio_store(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
-{
-	struct ad7879 *ts = dev_get_drvdata(dev);
-	unsigned long val;
-	int error;
-
-	error = strict_strtoul(buf, 10, &val);
-	if (error)
-		return error;
-
-	mutex_lock(&ts->mutex);
-	ts->gpio = !!val;
-	error = ad7879_write(ts->bus, AD7879_REG_CTRL2,
-			   ts->gpio ?
-				ts->cmd_crtl2 & ~AD7879_GPIO_DATA :
-				ts->cmd_crtl2 | AD7879_GPIO_DATA);
-	mutex_unlock(&ts->mutex);
-
-	return error ? : count;
-}
-
-static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store);
-
 static struct attribute *ad7879_attributes[] = {
 	&dev_attr_disable.attr,
-	&dev_attr_gpio.attr,
 	NULL
 };
 
@@ -367,6 +316,124 @@
 	.attrs = ad7879_attributes,
 };
 
+#ifdef CONFIG_GPIOLIB
+static int ad7879_gpio_direction_input(struct gpio_chip *chip,
+					unsigned gpio)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+	int err;
+
+	mutex_lock(&ts->mutex);
+	ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL;
+	err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	mutex_unlock(&ts->mutex);
+
+	return err;
+}
+
+static int ad7879_gpio_direction_output(struct gpio_chip *chip,
+					unsigned gpio, int level)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+	int err;
+
+	mutex_lock(&ts->mutex);
+	ts->cmd_crtl2 &= ~AD7879_GPIODIR;
+	ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL;
+	if (level)
+		ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+	else
+		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
+
+	err = ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	mutex_unlock(&ts->mutex);
+
+	return err;
+}
+
+static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+	u16 val;
+
+	mutex_lock(&ts->mutex);
+	val = ad7879_read(ts->bus, AD7879_REG_CTRL2);
+	mutex_unlock(&ts->mutex);
+
+	return !!(val & AD7879_GPIO_DATA);
+}
+
+static void ad7879_gpio_set_value(struct gpio_chip *chip,
+				  unsigned gpio, int value)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+
+	mutex_lock(&ts->mutex);
+	if (value)
+		ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+	else
+		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
+
+	ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	mutex_unlock(&ts->mutex);
+}
+
+static int __devinit ad7879_gpio_add(struct device *dev)
+{
+	struct ad7879 *ts = dev_get_drvdata(dev);
+	struct ad7879_platform_data *pdata = dev->platform_data;
+	int ret = 0;
+
+	if (pdata->gpio_export) {
+		ts->gc.direction_input = ad7879_gpio_direction_input;
+		ts->gc.direction_output = ad7879_gpio_direction_output;
+		ts->gc.get = ad7879_gpio_get_value;
+		ts->gc.set = ad7879_gpio_set_value;
+		ts->gc.can_sleep = 1;
+		ts->gc.base = pdata->gpio_base;
+		ts->gc.ngpio = 1;
+		ts->gc.label = "AD7879-GPIO";
+		ts->gc.owner = THIS_MODULE;
+		ts->gc.dev = dev;
+
+		ret = gpiochip_add(&ts->gc);
+		if (ret)
+			dev_err(dev, "failed to register gpio %d\n",
+				ts->gc.base);
+	}
+
+	return ret;
+}
+
+/*
+ * We mark ad7879_gpio_remove inline so there is a chance the code
+ * gets discarded when not needed. We can't do __devinit/__devexit
+ * markup since it is used in both probe and remove methods.
+ */
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+	struct ad7879 *ts = dev_get_drvdata(dev);
+	struct ad7879_platform_data *pdata = dev->platform_data;
+	int ret;
+
+	if (pdata->gpio_export) {
+		ret = gpiochip_remove(&ts->gc);
+		if (ret)
+			dev_err(dev, "failed to remove gpio %d\n",
+				ts->gc.base);
+	}
+}
+#else
+static inline int ad7879_gpio_add(struct device *dev)
+{
+	return 0;
+}
+
+static inline void ad7879_gpio_remove(struct device *dev)
+{
+}
+#endif
+
 static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
 {
 	struct input_dev *input_dev;
@@ -403,12 +470,6 @@
 	ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
 	ts->median = pdata->median;
 
-	if (pdata->gpio_output)
-		ts->gpio_init = AD7879_GPIO_EN |
-				(pdata->gpio_default ? 0 : AD7879_GPIO_DATA);
-	else
-		ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR;
-
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev));
 
 	input_dev->name = "AD7879 Touchscreen";
@@ -446,6 +507,23 @@
 		goto err_free_mem;
 	}
 
+	ts->cmd_crtl3 = AD7879_YPLUS_BIT |
+			AD7879_XPLUS_BIT |
+			AD7879_Z2_BIT |
+			AD7879_Z1_BIT |
+			AD7879_TEMPMASK_BIT |
+			AD7879_AUXVBATMASK_BIT |
+			AD7879_GPIOALERTMASK_BIT;
+
+	ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
+			AD7879_AVG(ts->averaging) |
+			AD7879_MFS(ts->median) |
+			AD7879_FCD(ts->first_conversion_delay);
+
+	ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
+			AD7879_ACQ(ts->acquisition_time) |
+			AD7879_TMR(ts->pen_down_acc_interval);
+
 	ad7879_setup(ts);
 
 	err = request_irq(bus->irq, ad7879_irq,
@@ -460,15 +538,21 @@
 	if (err)
 		goto err_free_irq;
 
-	err = input_register_device(input_dev);
+	err = ad7879_gpio_add(&bus->dev);
 	if (err)
 		goto err_remove_attr;
 
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_remove_gpio;
+
 	dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n",
 		 revid >> 8, bus->irq);
 
 	return 0;
 
+err_remove_gpio:
+	ad7879_gpio_remove(&bus->dev);
 err_remove_attr:
 	sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group);
 err_free_irq:
@@ -481,6 +565,7 @@
 
 static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts)
 {
+	ad7879_gpio_remove(&bus->dev);
 	ad7879_disable(ts);
 	sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
 	free_irq(ts->bus->irq, ts);
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 09a5e73..5256123 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -618,8 +618,8 @@
 #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
 static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1] ;
-	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3] ;
+	dev->x = (pkt[2] << 8) | pkt[1];
+	dev->y = (pkt[4] << 8) | pkt[3];
 	dev->press = pkt[5] & 0xff;
 	dev->touch = pkt[0] & 0x01;
 
@@ -809,9 +809,9 @@
 #ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
 	[DEVTYPE_GENERAL_TOUCH] = {
 		.min_xc		= 0x0,
-		.max_xc		= 0x0500,
+		.max_xc		= 0x7fff,
 		.min_yc		= 0x0,
-		.max_yc		= 0x0500,
+		.max_yc		= 0x7fff,
 		.rept_size	= 7,
 		.read_data	= general_touch_read_data,
 	},
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 96faa79..f96feeb 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -660,7 +660,7 @@
 	return 0;
 }
 
-static struct of_device_id smu_platform_match[] =
+static const struct of_device_id smu_platform_match[] =
 {
 	{
 		.type		= "smu",
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index ea32c7e..454bc50 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -2211,7 +2211,7 @@
 	return 0;
 }
 
-static struct of_device_id fcu_match[] = 
+static const struct of_device_id fcu_match[] = 
 {
 	{
 	.type		= "fcu",
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 3fbe41b..ba48fd7 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -457,7 +457,7 @@
 	return 0;
 }
 
-static struct of_device_id therm_of_match[] = {{
+static const struct of_device_id therm_of_match[] = {{
 	.name		= "fan",
 	.compatible	= "adm1030"
     }, {}
diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c
index 54abf9e..f1c8cae 100644
--- a/drivers/md/dm-log-userspace-transfer.c
+++ b/drivers/md/dm-log-userspace-transfer.c
@@ -172,11 +172,15 @@
 {
 	int r = 0;
 	size_t dummy = 0;
-	int overhead_size =
-		sizeof(struct dm_ulog_request *) + sizeof(struct cn_msg);
+	int overhead_size = sizeof(struct dm_ulog_request) + sizeof(struct cn_msg);
 	struct dm_ulog_request *tfr = prealloced_ulog_tfr;
 	struct receiving_pkg pkg;
 
+	/*
+	 * Given the space needed to hold the 'struct cn_msg' and
+	 * 'struct dm_ulog_request' - do we have enough payload
+	 * space remaining?
+	 */
 	if (data_size > (DM_ULOG_PREALLOCED_SIZE - overhead_size)) {
 		DMINFO("Size of tfr exceeds preallocated size");
 		return -EINVAL;
@@ -191,7 +195,7 @@
 	 */
 	mutex_lock(&dm_ulog_lock);
 
-	memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
+	memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - sizeof(struct cn_msg));
 	memcpy(tfr->uuid, uuid, DM_UUID_LEN);
 	tfr->luid = luid;
 	tfr->seq = dm_ulog_seq++;
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ad779bd..6c1046d 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -724,7 +724,7 @@
 	/*
 	 * Dispatch io.
 	 */
-	if (unlikely(ms->log_failure)) {
+	if (unlikely(ms->log_failure) && errors_handled(ms)) {
 		spin_lock_irq(&ms->lock);
 		bio_list_merge(&ms->failures, &sync);
 		spin_unlock_irq(&ms->lock);
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index 5f19ceb..168bd38 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -660,10 +660,9 @@
 	spin_lock_irq(&rh->region_lock);
 	if (success)
 		list_add(&reg->list, &reg->rh->recovered_regions);
-	else {
-		reg->state = DM_RH_NOSYNC;
+	else
 		list_add(&reg->list, &reg->rh->failed_recovered_regions);
-	}
+
 	spin_unlock_irq(&rh->region_lock);
 
 	rh->wakeup_workers(rh->context);
diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c
index 7d08879..c097d8a 100644
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -254,7 +254,7 @@
 	 * Issue the synchronous I/O from a different thread
 	 * to avoid generic_make_request recursion.
 	 */
-	INIT_WORK(&req.work, do_metadata);
+	INIT_WORK_ON_STACK(&req.work, do_metadata);
 	queue_work(ps->metadata_wq, &req.work);
 	flush_workqueue(ps->metadata_wq);
 
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index e0efc1a..bd58703 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -110,7 +110,7 @@
 	}
 
 	stripes = simple_strtoul(argv[0], &end, 10);
-	if (*end) {
+	if (!stripes || *end) {
 		ti->error = "Invalid stripe count";
 		return -EINVAL;
 	}
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index f53392d..f91b409 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -80,20 +80,12 @@
 };
 
 /*
- * The sysfs structure is embedded in md struct, nothing to do here
- */
-static void dm_sysfs_release(struct kobject *kobj)
-{
-}
-
-/*
  * dm kobject is embedded in mapped_device structure
  * no need to define release function here
  */
 static struct kobj_type dm_ktype = {
 	.sysfs_ops	= &dm_sysfs_ops,
 	.default_attrs	= dm_attrs,
-	.release	= dm_sysfs_release
 };
 
 /*
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index be62547..4b22feb 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -503,16 +503,15 @@
 		return 0;
 	}
 
-	if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
-		DMWARN("%s: target device %s is misaligned: "
+	if (bdev_stack_limits(limits, bdev, start) < 0)
+		DMWARN("%s: adding target device %s caused an alignment inconsistency: "
 		       "physical_block_size=%u, logical_block_size=%u, "
 		       "alignment_offset=%u, start=%llu",
 		       dm_device_name(ti->table->md), bdevname(bdev, b),
 		       q->limits.physical_block_size,
 		       q->limits.logical_block_size,
 		       q->limits.alignment_offset,
-		       (unsigned long long) start << 9);
-
+		       (unsigned long long) start << SECTOR_SHIFT);
 
 	/*
 	 * Check if merge fn is supported.
@@ -1026,9 +1025,9 @@
 		 * for the table.
 		 */
 		if (blk_stack_limits(limits, &ti_limits, 0) < 0)
-			DMWARN("%s: target device "
+			DMWARN("%s: adding target device "
 			       "(start sect %llu len %llu) "
-			       "is misaligned",
+			       "caused an alignment inconsistency",
 			       dm_device_name(table->md),
 			       (unsigned long long) ti->begin,
 			       (unsigned long long) ti->len);
@@ -1080,15 +1079,6 @@
 			       struct queue_limits *limits)
 {
 	/*
-	 * Each target device in the table has a data area that should normally
-	 * be aligned such that the DM device's alignment_offset is 0.
-	 * FIXME: Propagate alignment_offsets up the stack and warn of
-	 *	  sub-optimal or inconsistent settings.
-	 */
-	limits->alignment_offset = 0;
-	limits->misaligned = 0;
-
-	/*
 	 * Copy table's limits to the DM device's request_queue
 	 */
 	q->limits = *limits;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 3167480..aa4e2aa 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1595,10 +1595,15 @@
 	return BLKPREP_OK;
 }
 
-static void map_request(struct dm_target *ti, struct request *clone,
-			struct mapped_device *md)
+/*
+ * Returns:
+ * 0  : the request has been processed (not requeued)
+ * !0 : the request has been requeued
+ */
+static int map_request(struct dm_target *ti, struct request *clone,
+		       struct mapped_device *md)
 {
-	int r;
+	int r, requeued = 0;
 	struct dm_rq_target_io *tio = clone->end_io_data;
 
 	/*
@@ -1625,6 +1630,7 @@
 	case DM_MAPIO_REQUEUE:
 		/* The target wants to requeue the I/O */
 		dm_requeue_unmapped_request(clone);
+		requeued = 1;
 		break;
 	default:
 		if (r > 0) {
@@ -1636,6 +1642,8 @@
 		dm_kill_unmapped_request(clone, r);
 		break;
 	}
+
+	return requeued;
 }
 
 /*
@@ -1677,12 +1685,17 @@
 		atomic_inc(&md->pending[rq_data_dir(clone)]);
 
 		spin_unlock(q->queue_lock);
-		map_request(ti, clone, md);
+		if (map_request(ti, clone, md))
+			goto requeued;
+
 		spin_lock_irq(q->queue_lock);
 	}
 
 	goto out;
 
+requeued:
+	spin_lock_irq(q->queue_lock);
+
 plug_and_out:
 	if (!elv_queue_empty(q))
 		/* Some requests still remain, retry later */
diff --git a/drivers/md/md.c b/drivers/md/md.c
index dd3dfe4..a20a71e 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4075,8 +4075,10 @@
 {
 	mddev_t *mddev = container_of(ws, mddev_t, del_work);
 
-	if (mddev->private == &md_redundancy_group) {
+	if (mddev->private) {
 		sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+		if (mddev->private != (void*)1)
+			sysfs_remove_group(&mddev->kobj, mddev->private);
 		if (mddev->sysfs_action)
 			sysfs_put(mddev->sysfs_action);
 		mddev->sysfs_action = NULL;
@@ -4287,10 +4289,7 @@
 		sysfs_notify_dirent(rdev->sysfs_state);
 	}
 
-	md_probe(mddev->unit, NULL, NULL);
 	disk = mddev->gendisk;
-	if (!disk)
-		return -ENOMEM;
 
 	spin_lock(&pers_lock);
 	pers = find_pers(mddev->level, mddev->clevel);
@@ -4530,8 +4529,8 @@
 			mddev->queue->unplug_fn = NULL;
 			mddev->queue->backing_dev_info.congested_fn = NULL;
 			module_put(mddev->pers->owner);
-			if (mddev->pers->sync_request)
-				mddev->private = &md_redundancy_group;
+			if (mddev->pers->sync_request && mddev->private == NULL)
+				mddev->private = (void*)1;
 			mddev->pers = NULL;
 			/* tell userspace to handle 'inactive' */
 			sysfs_notify_dirent(mddev->sysfs_state);
@@ -4578,9 +4577,6 @@
 		}
 		mddev->bitmap_info.offset = 0;
 
-		/* make sure all md_delayed_delete calls have finished */
-		flush_scheduled_work();
-
 		export_array(mddev);
 
 		mddev->array_sectors = 0;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e84204e..ceb24af 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5136,9 +5136,8 @@
 	mddev->thread = NULL;
 	mddev->queue->backing_dev_info.congested_fn = NULL;
 	blk_sync_queue(mddev->queue); /* the unplug fn references 'conf'*/
-	sysfs_remove_group(&mddev->kobj, &raid5_attrs_group);
 	free_conf(conf);
-	mddev->private = NULL;
+	mddev->private = &raid5_attrs_group;
 	return 0;
 }
 
@@ -5464,11 +5463,11 @@
 		    !test_bit(Faulty, &rdev->flags)) {
 			if (raid5_add_disk(mddev, rdev) == 0) {
 				char nm[20];
-				if (rdev->raid_disk >= conf->previous_raid_disks)
+				if (rdev->raid_disk >= conf->previous_raid_disks) {
 					set_bit(In_sync, &rdev->flags);
-				else
+					added_devices++;
+				} else
 					rdev->recovery_offset = 0;
-				added_devices++;
 				sprintf(nm, "rd%d", rdev->raid_disk);
 				if (sysfs_create_link(&mddev->kobj,
 						      &rdev->kobj, nm))
@@ -5480,9 +5479,12 @@
 				break;
 		}
 
+	/* When a reshape changes the number of devices, ->degraded
+	 * is measured against the large of the pre and post number of
+	 * devices.*/
 	if (mddev->delta_disks > 0) {
 		spin_lock_irqsave(&conf->device_lock, flags);
-		mddev->degraded = (conf->raid_disks - conf->previous_raid_disks)
+		mddev->degraded += (conf->raid_disks - conf->previous_raid_disks)
 			- added_devices;
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 	}
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index bff7a53..b521ed9 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -13,7 +13,7 @@
  */
 
 
-#include <linux/usb/input.h>
+#include <linux/input.h>
 #include <media/ir-common.h>
 
 #define IR_TAB_MIN_SIZE	32
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index becbaad..5ed7526 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1333,9 +1333,9 @@
 
 	DEB_CAP(("vbuf:%p\n",vb));
 
-	release_all_pagetables(dev, buf);
-
 	saa7146_dma_free(dev,q,buf);
+
+	release_all_pagetables(dev, buf);
 }
 
 static struct videobuf_queue_ops video_qops = {
diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c
index c190b0d..2833137 100644
--- a/drivers/media/common/tuners/tda8290.c
+++ b/drivers/media/common/tuners/tda8290.c
@@ -144,7 +144,8 @@
 	}
 
 	if (params->mode == V4L2_TUNER_RADIO) {
-		priv->tda8290_easy_mode = 0x01;		/* Start with MN values */
+		/* Set TDA8295 to FM radio; Start TDA8290 with MN values */
+		priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01;
 		tuner_dbg("setting to radio FM\n");
 	} else {
 		tuner_dbg("setting tda829x to system %s\n", mode);
@@ -672,16 +673,19 @@
 static int tda8295_probe(struct tuner_i2c_props *i2c_props)
 {
 #define TDA8295_ID 0x8a
+#define TDA8295C2_ID 0x8b
 	unsigned char tda8295_id[] = { 0x2f, 0x00 };
 
 	/* detect tda8295 */
 	tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1);
 	tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1);
 
-	if (tda8295_id[1] == TDA8295_ID) {
+	if ((tda8295_id[1] & 0xfe) == TDA8295_ID) {
 		if (debug)
-			printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n",
-			       __func__, i2c_adapter_id(i2c_props->adap),
+			printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n",
+			       __func__, (tda8295_id[1] == TDA8295_ID) ?
+			       "tda8295c1" : "tda8295c2",
+			       i2c_adapter_id(i2c_props->adap),
 			       i2c_props->addr);
 		return 0;
 	}
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 35d0817..cf8f65f 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -72,6 +72,10 @@
 	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/pt1/Kconfig"
 
+comment "Supported Mantis Adapters"
+	depends on DVB_CORE && PCI && I2C
+	source "drivers/media/dvb/mantis/Kconfig"
+
 comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index 16d262d..c12922c 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -2,6 +2,18 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/
+obj-y        := dvb-core/	\
+		frontends/	\
+		ttpci/		\
+		ttusb-dec/	\
+		ttusb-budget/	\
+		b2c2/		\
+		bt8xx/		\
+		dvb-usb/	\
+		pluto2/		\
+		siano/		\
+		dm1105/		\
+		pt1/		\
+		mantis/
 
 obj-$(CONFIG_DVB_FIREDTV)	+= firewire/
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index c37790a..9ddc579 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -761,7 +761,6 @@
 	dvb_ringbuffer_init(&dmxdevfilter->buffer, NULL, 8192);
 	dmxdevfilter->type = DMXDEV_TYPE_NONE;
 	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_ALLOCATED);
-	INIT_LIST_HEAD(&dmxdevfilter->feed.ts);
 	init_timer(&dmxdevfilter->timer);
 
 	dvbdev->users++;
@@ -887,6 +886,7 @@
 	dmxdevfilter->type = DMXDEV_TYPE_PES;
 	memcpy(&dmxdevfilter->params, params,
 	       sizeof(struct dmx_pes_filter_params));
+	INIT_LIST_HEAD(&dmxdevfilter->feed.ts);
 
 	dvb_dmxdev_filter_state_set(dmxdevfilter, DMXDEV_STATE_SET);
 
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index b78cfb7..67f189b 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -426,16 +426,7 @@
 		};
 	};
 
-	if (dvb_demux_tscheck) {
-		if (!demux->cnt_storage)
-			demux->cnt_storage = vmalloc(MAX_PID + 1);
-
-		if (!demux->cnt_storage) {
-			printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
-			dvb_demux_tscheck = 0;
-			goto no_dvb_demux_tscheck;
-		}
-
+	if (demux->cnt_storage) {
 		/* check pkt counter */
 		if (pid < MAX_PID) {
 			if (buf[1] & 0x80)
@@ -454,7 +445,6 @@
 		};
 		/* end check */
 	};
-no_dvb_demux_tscheck:
 
 	list_for_each_entry(feed, &demux->feed_list, list_head) {
 		if ((feed->pid != pid) && (feed->pid != 0x2000))
@@ -1246,6 +1236,7 @@
 	dvbdemux->feed = vmalloc(dvbdemux->feednum * sizeof(struct dvb_demux_feed));
 	if (!dvbdemux->feed) {
 		vfree(dvbdemux->filter);
+		dvbdemux->filter = NULL;
 		return -ENOMEM;
 	}
 	for (i = 0; i < dvbdemux->filternum; i++) {
@@ -1257,6 +1248,13 @@
 		dvbdemux->feed[i].index = i;
 	}
 
+	if (dvb_demux_tscheck) {
+		dvbdemux->cnt_storage = vmalloc(MAX_PID + 1);
+
+		if (!dvbdemux->cnt_storage)
+			printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n");
+	}
+
 	INIT_LIST_HEAD(&dvbdemux->frontend_list);
 
 	for (i = 0; i < DMX_TS_PES_OTHER; i++) {
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 1b24989..465295b 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -112,11 +112,13 @@
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
+	select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index a3b8b697..cd7f9b7 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -208,6 +208,14 @@
 	help
 	  A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
 
+config DVB_MB86A16
+	tristate "Fujitsu MB86A16 based"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-S/DSS Direct Conversion reveiver.
+	  Say Y when you want to support this frontend.
+
 comment "DVB-T (terrestrial) frontends"
 	depends on DVB_CORE
 
@@ -587,6 +595,17 @@
 	help
 	  A DMB-TH tuner module. Say Y when you want to support this frontend.
 
+config DVB_TDA665x
+	tristate "TDA665x tuner"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  Support for tuner modules based on Philips TDA6650/TDA6651 chips.
+	  Say Y when you want to support this chip.
+
+	  Currently supported tuners:
+	  * Panasonic ENV57H12D5 (ET-50DT)
+
 comment "Tools to develop new frontends"
 
 config DVB_DUMMY_FE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 47575cc..874e8ad 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -64,6 +64,7 @@
 obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o
 obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
 obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
+obj-$(CONFIG_DVB_TDA665x) += tda665x.o
 obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o
 obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
 obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
@@ -80,3 +81,4 @@
 obj-$(CONFIG_DVB_ISL6423) += isl6423.o
 obj-$(CONFIG_DVB_EC100) += ec100.o
 obj-$(CONFIG_DVB_DS3000) += ds3000.o
+obj-$(CONFIG_DVB_MB86A16) += mb86a16.o
diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h
index d99619a..b1ee207 100644
--- a/drivers/media/dvb/frontends/dib8000.h
+++ b/drivers/media/dvb/frontends/dib8000.h
@@ -100,7 +100,7 @@
 static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-    return CT_SHUTDOWN,
+	return CT_SHUTDOWN;
 }
 static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe)
 {
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index 3051b64..445fa10 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -192,8 +192,8 @@
 	spi_bias *= qam_tab[p->constellation];
 	spi_bias /= p->code_rate_HP + 1;
 	spi_bias /= (guard_tab[p->guard_interval] + 32);
-	spi_bias *= 1000ULL;
-	spi_bias /= 1000ULL + ppm/1000;
+	spi_bias *= 1000;
+	spi_bias /= 1000 + ppm/1000;
 	spi_bias *= p->code_rate_HP;
 
 	val0x04 = (p->transmission_mode << 2) | p->guard_interval;
diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h
index 4fa6e52..9cb11c9 100644
--- a/drivers/media/dvb/frontends/lgdt3305.h
+++ b/drivers/media/dvb/frontends/lgdt3305.h
@@ -54,13 +54,13 @@
 	u16 usref_qam256; /* default: 0x2a80 */
 
 	/* disable i2c repeater - 0:repeater enabled 1:repeater disabled */
-	int deny_i2c_rptr:1;
+	unsigned int deny_i2c_rptr:1;
 
 	/* spectral inversion - 0:disabled 1:enabled */
-	int spectral_inversion:1;
+	unsigned int spectral_inversion:1;
 
 	/* use RF AGC loop - 0:disabled 1:enabled */
-	int rf_agc_loop:1;
+	unsigned int rf_agc_loop:1;
 
 	enum lgdt3305_mpeg_mode mpeg_mode;
 	enum lgdt3305_tp_clock_edge tpclk_edge;
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
new file mode 100644
index 0000000..d05f750
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16.c
@@ -0,0 +1,1878 @@
+/*
+	Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include "dvb_frontend.h"
+#include "mb86a16.h"
+#include "mb86a16_priv.h"
+
+unsigned int verbose = 5;
+module_param(verbose, int, 0644);
+
+#define ABS(x)		((x) < 0 ? (-x) : (x))
+
+struct mb86a16_state {
+	struct i2c_adapter		*i2c_adap;
+	const struct mb86a16_config	*config;
+	struct dvb_frontend		frontend;
+
+	/* tuning parameters */
+	int				frequency;
+	int				srate;
+
+	/* Internal stuff */
+	int				master_clk;
+	int				deci;
+	int				csel;
+	int				rsel;
+};
+
+#define MB86A16_ERROR		0
+#define MB86A16_NOTICE		1
+#define MB86A16_INFO		2
+#define MB86A16_DEBUG		3
+
+#define dprintk(x, y, z, format, arg...) do {						\
+	if (z) {									\
+		if	((x > MB86A16_ERROR) && (x > y))				\
+			printk(KERN_ERR "%s: " format "\n", __func__, ##arg);		\
+		else if ((x > MB86A16_NOTICE) && (x > y))				\
+			printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg);	\
+		else if ((x > MB86A16_INFO) && (x > y))					\
+			printk(KERN_INFO "%s: " format "\n", __func__, ##arg);		\
+		else if ((x > MB86A16_DEBUG) && (x > y))				\
+			printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg);		\
+	} else {									\
+		if (x > y)								\
+			printk(format, ##arg);						\
+	}										\
+} while (0)
+
+#define TRACE_IN	dprintk(verbose, MB86A16_DEBUG, 1, "-->()")
+#define TRACE_OUT	dprintk(verbose, MB86A16_DEBUG, 1, "()-->")
+
+static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val)
+{
+	int ret;
+	u8 buf[] = { reg, val };
+
+	struct i2c_msg msg = {
+		.addr = state->config->demod_address,
+		.flags = 0,
+		.buf = buf,
+		.len = 2
+	};
+
+	dprintk(verbose, MB86A16_DEBUG, 1,
+		"writing to [0x%02x],Reg[0x%02x],Data[0x%02x]",
+		state->config->demod_address, buf[0], buf[1]);
+
+	ret = i2c_transfer(state->i2c_adap, &msg, 1);
+
+	return (ret != 1) ? -EREMOTEIO : 0;
+}
+
+static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val)
+{
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+
+	struct i2c_msg msg[] = {
+		{
+			.addr = state->config->demod_address,
+			.flags = 0,
+			.buf = b0,
+			.len = 1
+		}, {
+			.addr = state->config->demod_address,
+			.flags = I2C_M_RD,
+			.buf = b1,
+			.len = 1
+		}
+	};
+	ret = i2c_transfer(state->i2c_adap, msg, 2);
+	if (ret != 2) {
+		dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)",
+			reg, ret);
+
+		return -EREMOTEIO;
+	}
+	*val = b1[0];
+
+	return ret;
+}
+
+static int CNTM_set(struct mb86a16_state *state,
+		    unsigned char timint1,
+		    unsigned char timint2,
+		    unsigned char cnext)
+{
+	unsigned char val;
+
+	val = (timint1 << 4) | (timint2 << 2) | cnext;
+	if (mb86a16_write(state, MB86A16_CNTMR, val) < 0)
+		goto err;
+
+	return 0;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int smrt_set(struct mb86a16_state *state, int rate)
+{
+	int tmp ;
+	int m ;
+	unsigned char STOFS0, STOFS1;
+
+	m = 1 << state->deci;
+	tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk;
+
+	STOFS0 = tmp & 0x0ff;
+	STOFS1 = (tmp & 0xf00) >> 8;
+
+	if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) |
+				       (state->csel << 1) |
+					state->rsel) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -1;
+}
+
+static int srst(struct mb86a16_state *state)
+{
+	if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+
+}
+
+static int afcex_data_set(struct mb86a16_state *state,
+			  unsigned char AFCEX_L,
+			  unsigned char AFCEX_H)
+{
+	if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+
+	return -1;
+}
+
+static int afcofs_data_set(struct mb86a16_state *state,
+			   unsigned char AFCEX_L,
+			   unsigned char AFCEX_H)
+{
+	if (mb86a16_write(state, 0x58, AFCEX_L) < 0)
+		goto err;
+	if (mb86a16_write(state, 0x59, AFCEX_H) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int stlp_set(struct mb86a16_state *state,
+		    unsigned char STRAS,
+		    unsigned char STRBS)
+{
+	if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA)
+{
+	if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int initial_set(struct mb86a16_state *state)
+{
+	if (stlp_set(state, 5, 7))
+		goto err;
+
+	udelay(100);
+	if (afcex_data_set(state, 0, 0))
+		goto err;
+
+	udelay(100);
+	if (afcofs_data_set(state, 0, 0))
+		goto err;
+
+	udelay(100);
+	if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0)
+		goto err;
+	if (mb86a16_write(state, 0x2f, 0x21) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0)
+		goto err;
+	if (mb86a16_write(state, 0x54, 0xff) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0)
+		goto err;
+
+	return 0;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int S01T_set(struct mb86a16_state *state,
+		    unsigned char s1t,
+		    unsigned s0t)
+{
+	if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+
+static int EN_set(struct mb86a16_state *state,
+		  int cren,
+		  int afcen)
+{
+	unsigned char val;
+
+	val = 0x7a | (cren << 7) | (afcen << 2);
+	if (mb86a16_write(state, 0x49, val) < 0)
+		goto err;
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int AFCEXEN_set(struct mb86a16_state *state,
+		       int afcexen,
+		       int smrt)
+{
+	unsigned char AFCA ;
+
+	if (smrt > 18875)
+		AFCA = 4;
+	else if (smrt > 9375)
+		AFCA = 3;
+	else if (smrt > 2250)
+		AFCA = 2;
+	else
+		AFCA = 1;
+
+	if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0)
+		goto err;
+
+	return 0;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int DAGC_data_set(struct mb86a16_state *state,
+			 unsigned char DAGCA,
+			 unsigned char DAGCW)
+{
+	if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0)
+		goto err;
+
+	return 0;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static void smrt_info_get(struct mb86a16_state *state, int rate)
+{
+	if (rate >= 37501) {
+		state->deci = 0; state->csel = 0; state->rsel = 0;
+	} else if (rate >= 30001) {
+		state->deci = 0; state->csel = 0; state->rsel = 1;
+	} else if (rate >= 26251) {
+		state->deci = 0; state->csel = 1; state->rsel = 0;
+	} else if (rate >= 22501) {
+		state->deci = 0; state->csel = 1; state->rsel = 1;
+	} else if (rate >= 18751) {
+		state->deci = 1; state->csel = 0; state->rsel = 0;
+	} else if (rate >= 15001) {
+		state->deci = 1; state->csel = 0; state->rsel = 1;
+	} else if (rate >= 13126) {
+		state->deci = 1; state->csel = 1; state->rsel = 0;
+	} else if (rate >= 11251) {
+		state->deci = 1; state->csel = 1; state->rsel = 1;
+	} else if (rate >= 9376) {
+		state->deci = 2; state->csel = 0; state->rsel = 0;
+	} else if (rate >= 7501) {
+		state->deci = 2; state->csel = 0; state->rsel = 1;
+	} else if (rate >= 6563) {
+		state->deci = 2; state->csel = 1; state->rsel = 0;
+	} else if (rate >= 5626) {
+		state->deci = 2; state->csel = 1; state->rsel = 1;
+	} else if (rate >= 4688) {
+		state->deci = 3; state->csel = 0; state->rsel = 0;
+	} else if (rate >= 3751) {
+		state->deci = 3; state->csel = 0; state->rsel = 1;
+	} else if (rate >= 3282) {
+		state->deci = 3; state->csel = 1; state->rsel = 0;
+	} else if (rate >= 2814) {
+		state->deci = 3; state->csel = 1; state->rsel = 1;
+	} else if (rate >= 2344) {
+		state->deci = 4; state->csel = 0; state->rsel = 0;
+	} else if (rate >= 1876) {
+		state->deci = 4; state->csel = 0; state->rsel = 1;
+	} else if (rate >= 1641) {
+		state->deci = 4; state->csel = 1; state->rsel = 0;
+	} else if (rate >= 1407) {
+		state->deci = 4; state->csel = 1; state->rsel = 1;
+	} else if (rate >= 1172) {
+		state->deci = 5; state->csel = 0; state->rsel = 0;
+	} else if (rate >=  939) {
+		state->deci = 5; state->csel = 0; state->rsel = 1;
+	} else if (rate >=  821) {
+		state->deci = 5; state->csel = 1; state->rsel = 0;
+	} else {
+		state->deci = 5; state->csel = 1; state->rsel = 1;
+	}
+
+	if (state->csel == 0)
+		state->master_clk = 92000;
+	else
+		state->master_clk = 61333;
+
+}
+
+static int signal_det(struct mb86a16_state *state,
+		      int smrt,
+		      unsigned char *SIG)
+{
+
+	int ret ;
+	int smrtd ;
+	int wait_sym ;
+
+	u32 wait_t;
+	unsigned char S[3] ;
+	int i ;
+
+	if (*SIG > 45) {
+		if (CNTM_set(state, 2, 1, 2) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+			return -1;
+		}
+		wait_sym = 40000;
+	} else {
+		if (CNTM_set(state, 3, 1, 2) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+			return -1;
+		}
+		wait_sym = 80000;
+	}
+	for (i = 0; i < 3; i++) {
+		if (i == 0)
+			smrtd = smrt * 98 / 100;
+		else if (i == 1)
+			smrtd = smrt;
+		else
+			smrtd = smrt * 102 / 100;
+		smrt_info_get(state, smrtd);
+		smrt_set(state, smrtd);
+		srst(state);
+		wait_t = (wait_sym + 99 * smrtd / 100) / smrtd;
+		if (wait_t == 0)
+			wait_t = 1;
+		msleep_interruptible(10);
+		if (mb86a16_read(state, 0x37, &(S[i])) != 2) {
+			dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+			return -EREMOTEIO;
+		}
+	}
+	if ((S[1] > S[0] * 112 / 100) &&
+	    (S[1] > S[2] * 112 / 100)) {
+
+		ret = 1;
+	} else {
+		ret = 0;
+	}
+	*SIG = S[1];
+
+	if (CNTM_set(state, 0, 1, 2) < 0) {
+		dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error");
+		return -1;
+	}
+
+	return ret;
+}
+
+static int rf_val_set(struct mb86a16_state *state,
+		      int f,
+		      int smrt,
+		      unsigned char R)
+{
+	unsigned char C, F, B;
+	int M;
+	unsigned char rf_val[5];
+	int ack = -1;
+
+	if (smrt > 37750)
+		C = 1;
+	else if (smrt > 18875)
+		C = 2;
+	else if (smrt > 5500)
+		C = 3;
+	else
+		C = 4;
+
+	if (smrt > 30500)
+		F = 3;
+	else if (smrt > 9375)
+		F = 1;
+	else if (smrt > 4625)
+		F = 0;
+	else
+		F = 2;
+
+	if (f < 1060)
+		B = 0;
+	else if (f < 1175)
+		B = 1;
+	else if (f < 1305)
+		B = 2;
+	else if (f < 1435)
+		B = 3;
+	else if (f < 1570)
+		B = 4;
+	else if (f < 1715)
+		B = 5;
+	else if (f < 1845)
+		B = 6;
+	else if (f < 1980)
+		B = 7;
+	else if (f < 2080)
+		B = 8;
+	else
+		B = 9;
+
+	M = f * (1 << R) / 2;
+
+	rf_val[0] = 0x01 | (C << 3) | (F << 1);
+	rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12);
+	rf_val[2] = (M & 0x00ff0) >> 4;
+	rf_val[3] = ((M & 0x0000f) << 4) | B;
+
+	/* Frequency Set */
+	if (mb86a16_write(state, 0x21, rf_val[0]) < 0)
+		ack = 0;
+	if (mb86a16_write(state, 0x22, rf_val[1]) < 0)
+		ack = 0;
+	if (mb86a16_write(state, 0x23, rf_val[2]) < 0)
+		ack = 0;
+	if (mb86a16_write(state, 0x24, rf_val[3]) < 0)
+		ack = 0;
+	if (mb86a16_write(state, 0x25, 0x01) < 0)
+		ack = 0;
+	if (ack == 0) {
+		dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int afcerr_chk(struct mb86a16_state *state)
+{
+	unsigned char AFCM_L, AFCM_H ;
+	int AFCM ;
+	int afcm, afcerr ;
+
+	if (mb86a16_read(state, 0x0e, &AFCM_L) != 2)
+		goto err;
+	if (mb86a16_read(state, 0x0f, &AFCM_H) != 2)
+		goto err;
+
+	AFCM = (AFCM_H << 8) + AFCM_L;
+
+	if (AFCM > 2048)
+		afcm = AFCM - 4096;
+	else
+		afcm = AFCM;
+	afcerr = afcm * state->master_clk / 8192;
+
+	return afcerr;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int dagcm_val_get(struct mb86a16_state *state)
+{
+	int DAGCM;
+	unsigned char DAGCM_H, DAGCM_L;
+
+	if (mb86a16_read(state, 0x45, &DAGCM_L) != 2)
+		goto err;
+	if (mb86a16_read(state, 0x46, &DAGCM_H) != 2)
+		goto err;
+
+	DAGCM = (DAGCM_H << 8) + DAGCM_L;
+
+	return DAGCM;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	u8 stat, stat2;
+	struct mb86a16_state *state = fe->demodulator_priv;
+
+	*status = 0;
+
+	if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2)
+		goto err;
+	if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2)
+		goto err;
+	if ((stat > 25) && (stat2 > 25))
+		*status |= FE_HAS_SIGNAL;
+	if ((stat > 45) && (stat2 > 45))
+		*status |= FE_HAS_CARRIER;
+
+	if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2)
+		goto err;
+
+	if (stat & 0x01)
+		*status |= FE_HAS_SYNC;
+	if (stat & 0x01)
+		*status |= FE_HAS_VITERBI;
+
+	if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2)
+		goto err;
+
+	if ((stat & 0x0f) && (*status & FE_HAS_VITERBI))
+		*status |= FE_HAS_LOCK;
+
+	return 0;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int sync_chk(struct mb86a16_state *state,
+		    unsigned char *VIRM)
+{
+	unsigned char val;
+	int sync;
+
+	if (mb86a16_read(state, 0x0d, &val) != 2)
+		goto err;
+
+	dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val);
+	sync = val & 0x01;
+	*VIRM = (val & 0x1c) >> 2;
+
+	return sync;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+
+}
+
+static int freqerr_chk(struct mb86a16_state *state,
+		       int fTP,
+		       int smrt,
+		       int unit)
+{
+	unsigned char CRM, AFCML, AFCMH;
+	unsigned char temp1, temp2, temp3;
+	int crm, afcm, AFCM;
+	int crrerr, afcerr;		/* kHz */
+	int frqerr;			/* MHz */
+	int afcen, afcexen = 0;
+	int R, M, fOSC, fOSC_OFS;
+
+	if (mb86a16_read(state, 0x43, &CRM) != 2)
+		goto err;
+
+	if (CRM > 127)
+		crm = CRM - 256;
+	else
+		crm = CRM;
+
+	crrerr = smrt * crm / 256;
+	if (mb86a16_read(state, 0x49, &temp1) != 2)
+		goto err;
+
+	afcen = (temp1 & 0x04) >> 2;
+	if (afcen == 0) {
+		if (mb86a16_read(state, 0x2a, &temp1) != 2)
+			goto err;
+		afcexen = (temp1 & 0x20) >> 5;
+	}
+
+	if (afcen == 1) {
+		if (mb86a16_read(state, 0x0e, &AFCML) != 2)
+			goto err;
+		if (mb86a16_read(state, 0x0f, &AFCMH) != 2)
+			goto err;
+	} else if (afcexen == 1) {
+		if (mb86a16_read(state, 0x2b, &AFCML) != 2)
+			goto err;
+		if (mb86a16_read(state, 0x2c, &AFCMH) != 2)
+			goto err;
+	}
+	if ((afcen == 1) || (afcexen == 1)) {
+		smrt_info_get(state, smrt);
+		AFCM = ((AFCMH & 0x01) << 8) + AFCML;
+		if (AFCM > 255)
+			afcm = AFCM - 512;
+		else
+			afcm = AFCM;
+
+		afcerr = afcm * state->master_clk / 8192;
+	} else
+		afcerr = 0;
+
+	if (mb86a16_read(state, 0x22, &temp1) != 2)
+		goto err;
+	if (mb86a16_read(state, 0x23, &temp2) != 2)
+		goto err;
+	if (mb86a16_read(state, 0x24, &temp3) != 2)
+		goto err;
+
+	R = (temp1 & 0xe0) >> 5;
+	M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4);
+	if (R == 0)
+		fOSC = 2 * M;
+	else
+		fOSC = M;
+
+	fOSC_OFS = fOSC - fTP;
+
+	if (unit == 0) {	/* MHz */
+		if (crrerr + afcerr + fOSC_OFS * 1000 >= 0)
+			frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000;
+		else
+			frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000;
+	} else {	/* kHz */
+		frqerr = crrerr + afcerr + fOSC_OFS * 1000;
+	}
+
+	return frqerr;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt)
+{
+	unsigned char R;
+
+	if (smrt > 9375)
+		R = 0;
+	else
+		R = 1;
+
+	return R;
+}
+
+static void swp_info_get(struct mb86a16_state *state,
+			 int fOSC_start,
+			 int smrt,
+			 int v, int R,
+			 int swp_ofs,
+			 int *fOSC,
+			 int *afcex_freq,
+			 unsigned char *AFCEX_L,
+			 unsigned char *AFCEX_H)
+{
+	int AFCEX ;
+	int crnt_swp_freq ;
+
+	crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs;
+
+	if (R == 0)
+		*fOSC = (crnt_swp_freq + 1000) / 2000 * 2;
+	else
+		*fOSC = (crnt_swp_freq + 500) / 1000;
+
+	if (*fOSC >= crnt_swp_freq)
+		*afcex_freq = *fOSC * 1000 - crnt_swp_freq;
+	else
+		*afcex_freq = crnt_swp_freq - *fOSC * 1000;
+
+	AFCEX = *afcex_freq * 8192 / state->master_clk;
+	*AFCEX_L =  AFCEX & 0x00ff;
+	*AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+
+static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V,  int vmax, int vmin,
+			       int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1)
+{
+	int swp_freq ;
+
+	if ((i % 2 == 1) && (v <= vmax)) {
+		/* positive v (case 1) */
+		if ((v - 1 == vmin)				&&
+		    (*(V + 30 + v) >= 0)			&&
+		    (*(V + 30 + v - 1) >= 0)			&&
+		    (*(V + 30 + v - 1) > *(V + 30 + v))		&&
+		    (*(V + 30 + v - 1) > SIGMIN)) {
+
+			swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+			*SIG1 = *(V + 30 + v - 1);
+		} else if ((v == vmax)				&&
+			   (*(V + 30 + v) >= 0)			&&
+			   (*(V + 30 + v - 1) >= 0)		&&
+			   (*(V + 30 + v) > *(V + 30 + v - 1))	&&
+			   (*(V + 30 + v) > SIGMIN)) {
+			/* (case 2) */
+			swp_freq = fOSC * 1000 + afcex_freq;
+			*SIG1 = *(V + 30 + v);
+		} else if ((*(V + 30 + v) > 0)			&&
+			   (*(V + 30 + v - 1) > 0)		&&
+			   (*(V + 30 + v - 2) > 0)		&&
+			   (*(V + 30 + v - 3) > 0)		&&
+			   (*(V + 30 + v - 1) > *(V + 30 + v))	&&
+			   (*(V + 30 + v - 2) > *(V + 30 + v - 3)) &&
+			   ((*(V + 30 + v - 1) > SIGMIN)	||
+			   (*(V + 30 + v - 2) > SIGMIN))) {
+			/* (case 3) */
+			if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) {
+				swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+				*SIG1 = *(V + 30 + v - 1);
+			} else {
+				swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2;
+				*SIG1 = *(V + 30 + v - 2);
+			}
+		} else if ((v == vmax)				&&
+			   (*(V + 30 + v) >= 0)			&&
+			   (*(V + 30 + v - 1) >= 0)		&&
+			   (*(V + 30 + v - 2) >= 0)		&&
+			   (*(V + 30 + v) > *(V + 30 + v - 2))	&&
+			   (*(V + 30 + v - 1) > *(V + 30 + v - 2)) &&
+			   ((*(V + 30 + v) > SIGMIN)		||
+			   (*(V + 30 + v - 1) > SIGMIN))) {
+			/* (case 4) */
+			if (*(V + 30 + v) >= *(V + 30 + v - 1)) {
+				swp_freq = fOSC * 1000 + afcex_freq;
+				*SIG1 = *(V + 30 + v);
+			} else {
+				swp_freq = fOSC * 1000 + afcex_freq - swp_ofs;
+				*SIG1 = *(V + 30 + v - 1);
+			}
+		} else  {
+			swp_freq = -1 ;
+		}
+	} else if ((i % 2 == 0) && (v >= vmin)) {
+		/* Negative v (case 1) */
+		if ((*(V + 30 + v) > 0)				&&
+		    (*(V + 30 + v + 1) > 0)			&&
+		    (*(V + 30 + v + 2) > 0)			&&
+		    (*(V + 30 + v + 1) > *(V + 30 + v))		&&
+		    (*(V + 30 + v + 1) > *(V + 30 + v + 2))	&&
+		    (*(V + 30 + v + 1) > SIGMIN)) {
+
+			swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+			*SIG1 = *(V + 30 + v + 1);
+		} else if ((v + 1 == vmax)			&&
+			   (*(V + 30 + v) >= 0)			&&
+			   (*(V + 30 + v + 1) >= 0)		&&
+			   (*(V + 30 + v + 1) > *(V + 30 + v))	&&
+			   (*(V + 30 + v + 1) > SIGMIN)) {
+			/* (case 2) */
+			swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+			*SIG1 = *(V + 30 + v);
+		} else if ((v == vmin)				&&
+			   (*(V + 30 + v) > 0)			&&
+			   (*(V + 30 + v + 1) > 0)		&&
+			   (*(V + 30 + v + 2) > 0)		&&
+			   (*(V + 30 + v) > *(V + 30 + v + 1))	&&
+			   (*(V + 30 + v) > *(V + 30 + v + 2))	&&
+			   (*(V + 30 + v) > SIGMIN)) {
+			/* (case 3) */
+			swp_freq = fOSC * 1000 + afcex_freq;
+			*SIG1 = *(V + 30 + v);
+		} else if ((*(V + 30 + v) >= 0)			&&
+			   (*(V + 30 + v + 1) >= 0)		&&
+			   (*(V + 30 + v + 2) >= 0)		&&
+			   (*(V + 30 + v + 3) >= 0)		&&
+			   (*(V + 30 + v + 1) > *(V + 30 + v))	&&
+			   (*(V + 30 + v + 2) > *(V + 30 + v + 3)) &&
+			   ((*(V + 30 + v + 1) > SIGMIN)	||
+			    (*(V + 30 + v + 2) > SIGMIN))) {
+			/* (case 4) */
+			if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+				*SIG1 = *(V + 30 + v + 1);
+			} else {
+				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+				*SIG1 = *(V + 30 + v + 2);
+			}
+		} else if ((*(V + 30 + v) >= 0)			&&
+			   (*(V + 30 + v + 1) >= 0)		&&
+			   (*(V + 30 + v + 2) >= 0)		&&
+			   (*(V + 30 + v + 3) >= 0)		&&
+			   (*(V + 30 + v) > *(V + 30 + v + 2))	&&
+			   (*(V + 30 + v + 1) > *(V + 30 + v + 2)) &&
+			   (*(V + 30 + v) > *(V + 30 + v + 3))	&&
+			   (*(V + 30 + v + 1) > *(V + 30 + v + 3)) &&
+			   ((*(V + 30 + v) > SIGMIN)		||
+			    (*(V + 30 + v + 1) > SIGMIN))) {
+			/* (case 5) */
+			if (*(V + 30 + v) >= *(V + 30 + v + 1)) {
+				swp_freq = fOSC * 1000 + afcex_freq;
+				*SIG1 = *(V + 30 + v);
+			} else {
+				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+				*SIG1 = *(V + 30 + v + 1);
+			}
+		} else if ((v + 2 == vmin)			&&
+			   (*(V + 30 + v) >= 0)			&&
+			   (*(V + 30 + v + 1) >= 0)		&&
+			   (*(V + 30 + v + 2) >= 0)		&&
+			   (*(V + 30 + v + 1) > *(V + 30 + v))	&&
+			   (*(V + 30 + v + 2) > *(V + 30 + v))	&&
+			   ((*(V + 30 + v + 1) > SIGMIN)	||
+			    (*(V + 30 + v + 2) > SIGMIN))) {
+			/* (case 6) */
+			if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) {
+				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs;
+				*SIG1 = *(V + 30 + v + 1);
+			} else {
+				swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2;
+				*SIG1 = *(V + 30 + v + 2);
+			}
+		} else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) {
+			swp_freq = fOSC * 1000;
+			*SIG1 = *(V + 30 + v);
+		} else
+			swp_freq = -1;
+	} else
+		swp_freq = -1;
+
+	return swp_freq;
+}
+
+static void swp_info_get2(struct mb86a16_state *state,
+			  int smrt,
+			  int R,
+			  int swp_freq,
+			  int *afcex_freq,
+			  int *fOSC,
+			  unsigned char *AFCEX_L,
+			  unsigned char *AFCEX_H)
+{
+	int AFCEX ;
+
+	if (R == 0)
+		*fOSC = (swp_freq + 1000) / 2000 * 2;
+	else
+		*fOSC = (swp_freq + 500) / 1000;
+
+	if (*fOSC >= swp_freq)
+		*afcex_freq = *fOSC * 1000 - swp_freq;
+	else
+		*afcex_freq = swp_freq - *fOSC * 1000;
+
+	AFCEX = *afcex_freq * 8192 / state->master_clk;
+	*AFCEX_L =  AFCEX & 0x00ff;
+	*AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static void afcex_info_get(struct mb86a16_state *state,
+			   int afcex_freq,
+			   unsigned char *AFCEX_L,
+			   unsigned char *AFCEX_H)
+{
+	int AFCEX ;
+
+	AFCEX = afcex_freq * 8192 / state->master_clk;
+	*AFCEX_L =  AFCEX & 0x00ff;
+	*AFCEX_H = (AFCEX & 0x0f00) >> 8;
+}
+
+static int SEQ_set(struct mb86a16_state *state, unsigned char loop)
+{
+	/* SLOCK0 = 0 */
+	if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV)
+{
+	/* Viterbi Rate, IQ Settings */
+	if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int FEC_srst(struct mb86a16_state *state)
+{
+	if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int S2T_set(struct mb86a16_state *state, unsigned char S2T)
+{
+	if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T)
+{
+	if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+
+static int mb86a16_set_fe(struct mb86a16_state *state)
+{
+	u8 agcval, cnmval;
+
+	int i, j;
+	int fOSC = 0;
+	int fOSC_start = 0;
+	int wait_t;
+	int fcp;
+	int swp_ofs;
+	int V[60];
+	u8 SIG1MIN;
+
+	unsigned char CREN, AFCEN, AFCEXEN;
+	unsigned char SIG1;
+	unsigned char TIMINT1, TIMINT2, TIMEXT;
+	unsigned char S0T, S1T;
+	unsigned char S2T;
+/*	unsigned char S2T, S3T; */
+	unsigned char S4T, S5T;
+	unsigned char AFCEX_L, AFCEX_H;
+	unsigned char R;
+	unsigned char VIRM;
+	unsigned char ETH, VIA;
+	unsigned char junk;
+
+	int loop;
+	int ftemp;
+	int v, vmax, vmin;
+	int vmax_his, vmin_his;
+	int swp_freq, prev_swp_freq[20];
+	int prev_freq_num;
+	int signal_dupl;
+	int afcex_freq;
+	int signal;
+	int afcerr;
+	int temp_freq, delta_freq;
+	int dagcm[4];
+	int smrt_d;
+/*	int freq_err; */
+	int n;
+	int ret = -1;
+	int sync;
+
+	dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate);
+
+	fcp = 3000;
+	swp_ofs = state->srate / 4;
+
+	for (i = 0; i < 60; i++)
+		V[i] = -1;
+
+	for (i = 0; i < 20; i++)
+		prev_swp_freq[i] = 0;
+
+	SIG1MIN = 25;
+
+	for (n = 0; ((n < 3) && (ret == -1)); n++) {
+		SEQ_set(state, 0);
+		iq_vt_set(state, 0);
+
+		CREN = 0;
+		AFCEN = 0;
+		AFCEXEN = 1;
+		TIMINT1 = 0;
+		TIMINT2 = 1;
+		TIMEXT = 2;
+		S1T = 0;
+		S0T = 0;
+
+		if (initial_set(state) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "initial set failed");
+			return -1;
+		}
+		if (DAGC_data_set(state, 3, 2) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+			return -1;
+		}
+		if (EN_set(state, CREN, AFCEN) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+			return -1; /* (0, 0) */
+		}
+		if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+			return -1; /* (1, smrt) = (1, symbolrate) */
+		}
+		if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error");
+			return -1; /* (0, 1, 2) */
+		}
+		if (S01T_set(state, S1T, S0T) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+			return -1; /* (0, 0) */
+		}
+		smrt_info_get(state, state->srate);
+		if (smrt_set(state, state->srate) < 0) {
+			dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error");
+			return -1;
+		}
+
+		R = vco_dev_get(state, state->srate);
+		if (R == 1)
+			fOSC_start = state->frequency;
+
+		else if (R == 0) {
+			if (state->frequency % 2 == 0) {
+				fOSC_start = state->frequency;
+			} else {
+				fOSC_start = state->frequency + 1;
+				if (fOSC_start > 2150)
+					fOSC_start = state->frequency - 1;
+			}
+		}
+		loop = 1;
+		ftemp = fOSC_start * 1000;
+		vmax = 0 ;
+		while (loop == 1) {
+			ftemp = ftemp + swp_ofs;
+			vmax++;
+
+			/* Upper bound */
+			if (ftemp > 2150000) {
+				loop = 0;
+				vmax--;
+			} else {
+				if ((ftemp == 2150000) ||
+				    (ftemp - state->frequency * 1000 >= fcp + state->srate / 4))
+					loop = 0;
+			}
+		}
+
+		loop = 1;
+		ftemp = fOSC_start * 1000;
+		vmin = 0 ;
+		while (loop == 1) {
+			ftemp = ftemp - swp_ofs;
+			vmin--;
+
+			/* Lower bound */
+			if (ftemp < 950000) {
+				loop = 0;
+				vmin++;
+			} else {
+				if ((ftemp == 950000) ||
+				    (state->frequency * 1000 - ftemp >= fcp + state->srate / 4))
+					loop = 0;
+			}
+		}
+
+		wait_t = (8000 + state->srate / 2) / state->srate;
+		if (wait_t == 0)
+			wait_t = 1;
+
+		i = 0;
+		j = 0;
+		prev_freq_num = 0;
+		loop = 1;
+		signal = 0;
+		vmax_his = 0;
+		vmin_his = 0;
+		v = 0;
+
+		while (loop == 1) {
+			swp_info_get(state, fOSC_start, state->srate,
+				     v, R, swp_ofs, &fOSC,
+				     &afcex_freq, &AFCEX_L, &AFCEX_H);
+
+			udelay(100);
+			if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+				return -1;
+			}
+			udelay(100);
+			if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+				return -1;
+			}
+			if (srst(state) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+				return -1;
+			}
+			msleep_interruptible(wait_t);
+
+			if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+				dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+				return -1;
+			}
+			V[30 + v] = SIG1 ;
+			swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin,
+						      SIG1MIN, fOSC, afcex_freq,
+						      swp_ofs, &SIG1);	/* changed */
+
+			signal_dupl = 0;
+			for (j = 0; j < prev_freq_num; j++) {
+				if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) {
+					signal_dupl = 1;
+					dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j);
+				}
+			}
+			if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) {
+				dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate);
+				prev_swp_freq[prev_freq_num] = swp_freq;
+				prev_freq_num++;
+				swp_info_get2(state, state->srate, R, swp_freq,
+					      &afcex_freq, &fOSC,
+					      &AFCEX_L, &AFCEX_H);
+
+				if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+					return -1;
+				}
+				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+					return -1;
+				}
+				signal = signal_det(state, state->srate, &SIG1);
+				if (signal == 1) {
+					dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****");
+					loop = 0;
+				} else {
+					dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again...");
+					smrt_info_get(state, state->srate);
+					if (smrt_set(state, state->srate) < 0) {
+						dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+						return -1;
+					}
+				}
+			}
+			if (v > vmax)
+				vmax_his = 1 ;
+			if (v < vmin)
+				vmin_his = 1 ;
+			i++;
+
+			if ((i % 2 == 1) && (vmax_his == 1))
+				i++;
+			if ((i % 2 == 0) && (vmin_his == 1))
+				i++;
+
+			if (i % 2 == 1)
+				v = (i + 1) / 2;
+			else
+				v = -i / 2;
+
+			if ((vmax_his == 1) && (vmin_his == 1))
+				loop = 0 ;
+		}
+
+		if (signal == 1) {
+			dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check");
+			S1T = 7 ;
+			S0T = 1 ;
+			CREN = 0 ;
+			AFCEN = 1 ;
+			AFCEXEN = 0 ;
+
+			if (S01T_set(state, S1T, S0T) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+				return -1;
+			}
+			smrt_info_get(state, state->srate);
+			if (smrt_set(state, state->srate) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+				return -1;
+			}
+			if (EN_set(state, CREN, AFCEN) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+				return -1;
+			}
+			if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+				return -1;
+			}
+			afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H);
+			if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error");
+				return -1;
+			}
+			if (srst(state) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+				return -1;
+			}
+			/* delay 4~200 */
+			wait_t = 200000 / state->master_clk + 200000 / state->srate;
+			msleep(wait_t);
+			afcerr = afcerr_chk(state);
+			if (afcerr == -1)
+				return -1;
+
+			swp_freq = fOSC * 1000 + afcerr ;
+			AFCEXEN = 1 ;
+			if (state->srate >= 1500)
+				smrt_d = state->srate / 3;
+			else
+				smrt_d = state->srate / 2;
+			smrt_info_get(state, smrt_d);
+			if (smrt_set(state, smrt_d) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+				return -1;
+			}
+			if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+				return -1;
+			}
+			R = vco_dev_get(state, smrt_d);
+			if (DAGC_data_set(state, 2, 0) < 0) {
+				dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+				return -1;
+			}
+			for (i = 0; i < 3; i++) {
+				temp_freq = swp_freq + (i - 1) * state->srate / 8;
+				swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+				if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+					return -1;
+				}
+				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+					return -1;
+				}
+				wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+				msleep(wait_t);
+				dagcm[i] = dagcm_val_get(state);
+			}
+			if ((dagcm[0] > dagcm[1]) &&
+			    (dagcm[0] > dagcm[2]) &&
+			    (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) {
+
+				temp_freq = swp_freq - 2 * state->srate / 8;
+				swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+				if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+					return -1;
+				}
+				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+					return -1;
+				}
+				wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+				msleep(wait_t);
+				dagcm[3] = dagcm_val_get(state);
+				if (dagcm[3] > dagcm[1])
+					delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300;
+				else
+					delta_freq = 0;
+			} else if ((dagcm[2] > dagcm[1]) &&
+				   (dagcm[2] > dagcm[0]) &&
+				   (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) {
+
+				temp_freq = swp_freq + 2 * state->srate / 8;
+				swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+				if (rf_val_set(state, fOSC, smrt_d, R) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "rf val set");
+					return -1;
+				}
+				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set");
+					return -1;
+				}
+				wait_t = 200000 / state->master_clk + 40000 / smrt_d;
+				msleep(wait_t);
+				dagcm[3] = dagcm_val_get(state);
+				if (dagcm[3] > dagcm[1])
+					delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300;
+				else
+					delta_freq = 0 ;
+
+			} else {
+				delta_freq = 0 ;
+			}
+			dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq);
+			swp_freq += delta_freq;
+			dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq);
+			if (ABS(state->frequency * 1000 - swp_freq) > 3800) {
+				dprintk(verbose, MB86A16_INFO, 1, "NO  --  SIGNAL !");
+			} else {
+
+				S1T = 0;
+				S0T = 3;
+				CREN = 1;
+				AFCEN = 0;
+				AFCEXEN = 1;
+
+				if (S01T_set(state, S1T, S0T) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "S01T set error");
+					return -1;
+				}
+				if (DAGC_data_set(state, 0, 0) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error");
+					return -1;
+				}
+				R = vco_dev_get(state, state->srate);
+				smrt_info_get(state, state->srate);
+				if (smrt_set(state, state->srate) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "smrt set error");
+					return -1;
+				}
+				if (EN_set(state, CREN, AFCEN) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "EN set error");
+					return -1;
+				}
+				if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error");
+					return -1;
+				}
+				swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H);
+				if (rf_val_set(state, fOSC, state->srate, R) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "rf val set error");
+					return -1;
+				}
+				if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error");
+					return -1;
+				}
+				if (srst(state) < 0) {
+					dprintk(verbose, MB86A16_ERROR, 1, "srst error");
+					return -1;
+				}
+				wait_t = 7 + (10000 + state->srate / 2) / state->srate;
+				if (wait_t == 0)
+					wait_t = 1;
+				msleep_interruptible(wait_t);
+				if (mb86a16_read(state, 0x37, &SIG1) != 2) {
+					dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+					return -EREMOTEIO;
+				}
+
+				if (SIG1 > 110) {
+					S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6;
+					wait_t = 7 + (917504 + state->srate / 2) / state->srate;
+				} else if (SIG1 > 105) {
+					S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+					wait_t = 7 + (1048576 + state->srate / 2) / state->srate;
+				} else if (SIG1 > 85) {
+					S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+					wait_t = 7 + (1310720 + state->srate / 2) / state->srate;
+				} else if (SIG1 > 65) {
+					S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+					wait_t = 7 + (1572864 + state->srate / 2) / state->srate;
+				} else {
+					S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2;
+					wait_t = 7 + (2097152 + state->srate / 2) / state->srate;
+				}
+				wait_t *= 2; /* FOS */
+				S2T_set(state, S2T);
+				S45T_set(state, S4T, S5T);
+				Vi_set(state, ETH, VIA);
+				srst(state);
+				msleep_interruptible(wait_t);
+				sync = sync_chk(state, &VIRM);
+				dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync);
+				if (VIRM) {
+					if (VIRM == 4) {
+						/* 5/6 */
+						if (SIG1 > 110)
+							wait_t = (786432 + state->srate / 2) / state->srate;
+						else
+							wait_t = (1572864 + state->srate / 2) / state->srate;
+						if (state->srate < 5000)
+							/* FIXME ! , should be a long wait ! */
+							msleep_interruptible(wait_t);
+						else
+							msleep_interruptible(wait_t);
+
+						if (sync_chk(state, &junk) == 0) {
+							iq_vt_set(state, 1);
+							FEC_srst(state);
+						}
+					}
+					/* 1/2, 2/3, 3/4, 7/8 */
+					if (SIG1 > 110)
+						wait_t = (786432 + state->srate / 2) / state->srate;
+					else
+						wait_t = (1572864 + state->srate / 2) / state->srate;
+					msleep_interruptible(wait_t);
+					SEQ_set(state, 1);
+				} else {
+					dprintk(verbose, MB86A16_INFO, 1, "NO  -- SYNC");
+					SEQ_set(state, 1);
+					ret = -1;
+				}
+			}
+		} else {
+			dprintk(verbose, MB86A16_INFO, 1, "NO  -- SIGNAL");
+			ret = -1;
+		}
+
+		sync = sync_chk(state, &junk);
+		if (sync) {
+			dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******");
+			freqerr_chk(state, state->frequency, state->srate, 1);
+			ret = 0;
+			break;
+		}
+	}
+
+	mb86a16_read(state, 0x15, &agcval);
+	mb86a16_read(state, 0x26, &cnmval);
+	dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval);
+
+	return ret;
+}
+
+static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe,
+				   struct dvb_diseqc_master_cmd *cmd)
+{
+	struct mb86a16_state *state = fe->demodulator_priv;
+	int i;
+	u8 regs;
+
+	if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+		goto err;
+
+	regs = 0x18;
+
+	if (cmd->msg_len > 5 || cmd->msg_len < 4)
+		return -EINVAL;
+
+	for (i = 0; i < cmd->msg_len; i++) {
+		if (mb86a16_write(state, regs, cmd->msg[i]) < 0)
+			goto err;
+
+		regs++;
+	}
+	i += 0x90;
+
+	msleep_interruptible(10);
+
+	if (mb86a16_write(state, MB86A16_DCC1, i) < 0)
+		goto err;
+	if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+		goto err;
+
+	return 0;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
+{
+	struct mb86a16_state *state = fe->demodulator_priv;
+
+	switch (burst) {
+	case SEC_MINI_A:
+		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+						       MB86A16_DCC1_TBEN  |
+						       MB86A16_DCC1_TBO) < 0)
+			goto err;
+		if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+			goto err;
+		break;
+	case SEC_MINI_B:
+		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+						       MB86A16_DCC1_TBEN) < 0)
+			goto err;
+		if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+			goto err;
+		break;
+	}
+
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+	struct mb86a16_state *state = fe->demodulator_priv;
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0)
+			goto err;
+		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA |
+						       MB86A16_DCC1_CTOE) < 0)
+
+			goto err;
+		if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0)
+			goto err;
+		break;
+	case SEC_TONE_OFF:
+		if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0)
+			goto err;
+		if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0)
+			goto err;
+		if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0)
+			goto err;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe,
+					struct dvb_frontend_parameters *p)
+{
+	struct mb86a16_state *state = fe->demodulator_priv;
+
+	state->frequency = p->frequency / 1000;
+	state->srate = p->u.qpsk.symbol_rate / 1000;
+
+	if (!mb86a16_set_fe(state)) {
+		dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK");
+		return DVBFE_ALGO_SEARCH_SUCCESS;
+	}
+
+	dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!");
+	return DVBFE_ALGO_SEARCH_FAILED;
+}
+
+static void mb86a16_release(struct dvb_frontend *fe)
+{
+	struct mb86a16_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static int mb86a16_init(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static int mb86a16_sleep(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst;
+	u32 timer;
+
+	struct mb86a16_state *state = fe->demodulator_priv;
+
+	*ber = 0;
+	if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2)
+		goto err;
+	if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2)
+		goto err;
+	if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2)
+		goto err;
+	if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2)
+		goto err;
+	if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2)
+		goto err;
+	/* BER monitor invalid when BER_EN = 0	*/
+	if (ber_mon & 0x04) {
+		/* coarse, fast calculation	*/
+		*ber = ber_tab & 0x1f;
+		dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber);
+		if (ber_mon & 0x01) {
+			/*
+			 * BER_SEL = 1, The monitored BER is the estimated
+			 * value with a Reed-Solomon decoder error amount at
+			 * the deinterleaver output.
+			 * monitored BER is expressed as a 20 bit output in total
+			 */
+			ber_rst = ber_mon >> 3;
+			*ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+			if (ber_rst == 0)
+				timer =  12500000;
+			if (ber_rst == 1)
+				timer =  25000000;
+			if (ber_rst == 2)
+				timer =  50000000;
+			if (ber_rst == 3)
+				timer = 100000000;
+
+			*ber /= timer;
+			dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+		} else {
+			/*
+			 * BER_SEL = 0, The monitored BER is the estimated
+			 * value with a Viterbi decoder error amount at the
+			 * QPSK demodulator output.
+			 * monitored BER is expressed as a 24 bit output in total
+			 */
+			ber_tim = ber_mon >> 1;
+			*ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb;
+			if (ber_tim == 0)
+				timer = 16;
+			if (ber_tim == 1)
+				timer = 24;
+
+			*ber /= 2 ^ timer;
+			dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber);
+		}
+	}
+	return 0;
+err:
+	dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+	return -EREMOTEIO;
+}
+
+static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	u8 agcm = 0;
+	struct mb86a16_state *state = fe->demodulator_priv;
+
+	*strength = 0;
+	if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	*strength = ((0xff - agcm) * 100) / 256;
+	dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength);
+	*strength = (0xffff - 0xff) + agcm;
+
+	return 0;
+}
+
+struct cnr {
+	u8 cn_reg;
+	u8 cn_val;
+};
+
+static const struct cnr cnr_tab[] = {
+	{  35,  2 },
+	{  40,  3 },
+	{  50,  4 },
+	{  60,  5 },
+	{  70,  6 },
+	{  80,  7 },
+	{  92,  8 },
+	{ 103,  9 },
+	{ 115, 10 },
+	{ 138, 12 },
+	{ 162, 15 },
+	{ 180, 18 },
+	{ 185, 19 },
+	{ 189, 20 },
+	{ 195, 22 },
+	{ 199, 24 },
+	{ 201, 25 },
+	{ 202, 26 },
+	{ 203, 27 },
+	{ 205, 28 },
+	{ 208, 30 }
+};
+
+static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct mb86a16_state *state = fe->demodulator_priv;
+	int i = 0;
+	int low_tide = 2, high_tide = 30, q_level;
+	u8  cn;
+
+	*snr = 0;
+	if (mb86a16_read(state, 0x26, &cn) != 2) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) {
+		if (cn < cnr_tab[i].cn_reg) {
+			*snr = cnr_tab[i].cn_val;
+			break;
+		}
+	}
+	q_level = (*snr * 100) / (high_tide - low_tide);
+	dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level);
+	*snr = (0xffff - 0xff) + *snr;
+
+	return 0;
+}
+
+static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	u8 dist;
+	struct mb86a16_state *state = fe->demodulator_priv;
+
+	if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) {
+		dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error");
+		return -EREMOTEIO;
+	}
+	*ucblocks = dist;
+
+	return 0;
+}
+
+static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe)
+{
+	return DVBFE_ALGO_CUSTOM;
+}
+
+static struct dvb_frontend_ops mb86a16_ops = {
+	.info = {
+		.name			= "Fujitsu MB86A16 DVB-S",
+		.type			= FE_QPSK,
+		.frequency_min		= 950000,
+		.frequency_max		= 2150000,
+		.frequency_stepsize	= 3000,
+		.frequency_tolerance	= 0,
+		.symbol_rate_min	= 1000000,
+		.symbol_rate_max	= 45000000,
+		.symbol_rate_tolerance	= 500,
+		.caps			= FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+					  FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
+					  FE_CAN_FEC_7_8 | FE_CAN_QPSK    |
+					  FE_CAN_FEC_AUTO
+	},
+	.release			= mb86a16_release,
+
+	.get_frontend_algo		= mb86a16_frontend_algo,
+	.search				= mb86a16_search,
+	.read_status			= mb86a16_read_status,
+	.init				= mb86a16_init,
+	.sleep				= mb86a16_sleep,
+	.read_status			= mb86a16_read_status,
+
+	.read_ber			= mb86a16_read_ber,
+	.read_signal_strength		= mb86a16_read_signal_strength,
+	.read_snr			= mb86a16_read_snr,
+	.read_ucblocks			= mb86a16_read_ucblocks,
+
+	.diseqc_send_master_cmd		= mb86a16_send_diseqc_msg,
+	.diseqc_send_burst		= mb86a16_send_diseqc_burst,
+	.set_tone			= mb86a16_set_tone,
+};
+
+struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+				    struct i2c_adapter *i2c_adap)
+{
+	u8 dev_id = 0;
+	struct mb86a16_state *state = NULL;
+
+	state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	state->config = config;
+	state->i2c_adap = i2c_adap;
+
+	mb86a16_read(state, 0x7f, &dev_id);
+	if (dev_id != 0xfe)
+		goto error;
+
+	memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+	state->frontend.ops.set_voltage = state->config->set_voltage;
+
+	return &state->frontend;
+error:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(mb86a16_attach);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Manu Abraham");
diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h
new file mode 100644
index 0000000..6ea8c37
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16.h
@@ -0,0 +1,52 @@
+/*
+	Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_H
+#define __MB86A16_H
+
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+
+
+struct mb86a16_config {
+	u8 demod_address;
+
+	int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+};
+
+
+
+#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+					   struct i2c_adapter *i2c_adap);
+
+#else
+
+static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config,
+					   struct i2c_adapter *i2c_adap)
+{
+	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+#endif /* CONFIG_DVB_MB86A16 */
+
+#endif /* __MB86A16_H */
diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h
new file mode 100644
index 0000000..360a35a
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a16_priv.h
@@ -0,0 +1,151 @@
+/*
+	Fujitsu MB86A16 DVB-S/DSS DC Receiver driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MB86A16_PRIV_H
+#define __MB86A16_PRIV_H
+
+#define MB86A16_TSOUT		0x00
+#define MB86A16_TSOUT_HIZSEL	(0x01 << 5)
+#define MB86A16_TSOUT_HIZCNTI	(0x01 << 4)
+#define MB86A16_TSOUT_MODE	(0x01 << 3)
+#define MB86A16_TSOUT_ORDER	(0x01 << 2)
+#define MB86A16_TSOUT_ERROR	(0x01 << 1)
+#define Mb86A16_TSOUT_EDGE	(0x01 << 0)
+
+#define MB86A16_FEC		0x01
+#define MB86A16_FEC_FSYNC	(0x01 << 5)
+#define MB86A16_FEC_PCKB8	(0x01 << 4)
+#define MB86A16_FEC_DVDS	(0x01 << 3)
+#define MB86A16_FEC_EREN	(0x01 << 2)
+#define Mb86A16_FEC_RSEN	(0x01 << 1)
+#define MB86A16_FEC_DIEN	(0x01 << 0)
+
+#define MB86A16_AGC		0x02
+#define MB86A16_AGC_AGMD	(0x01 << 6)
+#define MB86A16_AGC_AGCW	(0x0f << 2)
+#define MB86A16_AGC_AGCP	(0x01 << 1)
+#define MB86A16_AGC_AGCR	(0x01 << 0)
+
+#define MB86A16_SRATE1		0x03
+#define MB86A16_SRATE1_DECI	(0x07 << 2)
+#define MB86A16_SRATE1_CSEL	(0x01 << 1)
+#define MB86A16_SRATE1_RSEL	(0x01 << 0)
+
+#define MB86A16_SRATE2		0x04
+#define MB86A16_SRATE2_STOFSL	(0xff << 0)
+
+#define MB86A16_SRATE3		0x05
+#define MB86A16_SRATE2_STOFSH	(0xff << 0)
+
+#define MB86A16_VITERBI		0x06
+#define MB86A16_FRAMESYNC	0x07
+#define MB86A16_CRLFILTCOEF1	0x08
+#define MB86A16_CRLFILTCOEF2	0x09
+#define MB86A16_STRFILTCOEF1	0x0a
+#define MB86A16_STRFILTCOEF2	0x0b
+#define MB86A16_RESET		0x0c
+#define MB86A16_STATUS		0x0d
+#define MB86A16_AFCML		0x0e
+#define MB86A16_AFCMH		0x0f
+#define MB86A16_BERMON		0x10
+#define MB86A16_BERTAB		0x11
+#define MB86A16_BERLSB		0x12
+#define MB86A16_BERMID		0x13
+#define MB86A16_BERMSB		0x14
+#define MB86A16_AGCM		0x15
+
+#define MB86A16_DCC1		0x16
+#define MB86A16_DCC1_DISTA	(0x01 << 7)
+#define MB86A16_DCC1_PRTY	(0x01 << 6)
+#define MB86A16_DCC1_CTOE	(0x01 << 5)
+#define MB86A16_DCC1_TBEN	(0x01 << 4)
+#define MB86A16_DCC1_TBO	(0x01 << 3)
+#define MB86A16_DCC1_NUM	(0x07 << 0)
+
+#define MB86A16_DCC2		0x17
+#define MB86A16_DCC2_DCBST	(0x01 << 0)
+
+#define MB86A16_DCC3		0x18
+#define MB86A16_DCC3_CODE0	(0xff << 0)
+
+#define MB86A16_DCC4		0x19
+#define MB86A16_DCC4_CODE1	(0xff << 0)
+
+#define MB86A16_DCC5		0x1a
+#define MB86A16_DCC5_CODE2	(0xff << 0)
+
+#define MB86A16_DCC6		0x1b
+#define MB86A16_DCC6_CODE3	(0xff << 0)
+
+#define MB86A16_DCC7		0x1c
+#define MB86A16_DCC7_CODE4	(0xff << 0)
+
+#define MB86A16_DCC8		0x1d
+#define MB86A16_DCC8_CODE5	(0xff << 0)
+
+#define MB86A16_DCCOUT		0x1e
+#define MB86A16_DCCOUT_DISEN	(0x01 << 0)
+
+#define MB86A16_TONEOUT1	0x1f
+#define MB86A16_TONE_TDIVL	(0xff << 0)
+
+#define MB86A16_TONEOUT2	0x20
+#define MB86A16_TONE_TMD	(0x03 << 2)
+#define MB86A16_TONE_TDIVH	(0x03 << 0)
+
+#define MB86A16_FREQ1		0x21
+#define MB86A16_FREQ2		0x22
+#define MB86A16_FREQ3		0x23
+#define MB86A16_FREQ4		0x24
+#define MB86A16_FREQSET		0x25
+#define MB86A16_CNM		0x26
+#define MB86A16_PORT0		0x27
+#define MB86A16_PORT1		0x28
+#define MB86A16_DRCFILT		0x29
+#define MB86A16_AFC		0x2a
+#define MB86A16_AFCEXL		0x2b
+#define MB86A16_AFCEXH		0x2c
+#define MB86A16_DAGC		0x2d
+#define MB86A16_SEQMODE		0x32
+#define MB86A16_S0S1T		0x33
+#define MB86A16_S2S3T		0x34
+#define MB86A16_S4S5T		0x35
+#define MB86A16_CNTMR		0x36
+#define MB86A16_SIG1		0x37
+#define MB86A16_SIG2		0x38
+#define MB86A16_VIMAG		0x39
+#define MB86A16_VISET1		0x3a
+#define MB86A16_VISET2		0x3b
+#define MB86A16_VISET3		0x3c
+#define MB86A16_FAGCS1		0x3d
+#define MB86A16_FAGCS2		0x3e
+#define MB86A16_FAGCS3		0x3f
+#define MB86A16_FAGCS4		0x40
+#define MB86A16_FAGCS5		0x41
+#define MB86A16_FAGCS6		0x42
+#define MB86A16_CRM		0x43
+#define MB86A16_STRM		0x44
+#define MB86A16_DAGCML		0x45
+#define MB86A16_DAGCMH		0x46
+#define MB86A16_QPSKTST		0x49
+#define MB86A16_DISTMON		0x52
+#define MB86A16_VERSION		0x7f
+
+#endif /* __MB86A16_PRIV_H */
diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c
index 6c1dbf9..6ca533e 100644
--- a/drivers/media/dvb/frontends/tda10021.c
+++ b/drivers/media/dvb/frontends/tda10021.c
@@ -426,6 +426,10 @@
 	id = tda10021_readreg(state, 0x1a);
 	if ((id & 0xf0) != 0x70) goto error;
 
+	/* Don't claim TDA10023 */
+	if (id == 0x7d)
+		goto error;
+
 	printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
 	       state->config->demod_address, id);
 
diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c
new file mode 100644
index 0000000..87d5273
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda665x.c
@@ -0,0 +1,257 @@
+/*
+	TDA665x tuner driver
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "dvb_frontend.h"
+#include "tda665x.h"
+
+struct tda665x_state {
+	struct dvb_frontend		*fe;
+	struct i2c_adapter		*i2c;
+	const struct tda665x_config	*config;
+
+	u32 frequency;
+	u32 bandwidth;
+};
+
+static int tda665x_read(struct tda665x_state *state, u8 *buf)
+{
+	const struct tda665x_config *config = state->config;
+	int err = 0;
+	struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 };
+
+	err = i2c_transfer(state->i2c, &msg, 1);
+	if (err != 1)
+		goto exit;
+
+	return err;
+exit:
+	printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+	return err;
+}
+
+static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length)
+{
+	const struct tda665x_config *config = state->config;
+	int err = 0;
+	struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length };
+
+	err = i2c_transfer(state->i2c, &msg, 1);
+	if (err != 1)
+		goto exit;
+
+	return err;
+exit:
+	printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
+	return err;
+}
+
+static int tda665x_get_state(struct dvb_frontend *fe,
+			     enum tuner_param param,
+			     struct tuner_state *tstate)
+{
+	struct tda665x_state *state = fe->tuner_priv;
+	int err = 0;
+
+	switch (param) {
+	case DVBFE_TUNER_FREQUENCY:
+		tstate->frequency = state->frequency;
+		break;
+	case DVBFE_TUNER_BANDWIDTH:
+		break;
+	default:
+		printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+		err = -EINVAL;
+		break;
+	}
+
+	return err;
+}
+
+static int tda665x_get_status(struct dvb_frontend *fe, u32 *status)
+{
+	struct tda665x_state *state = fe->tuner_priv;
+	u8 result = 0;
+	int err = 0;
+
+	*status = 0;
+
+	err = tda665x_read(state, &result);
+	if (err < 0)
+		goto exit;
+
+	if ((result >> 6) & 0x01) {
+		printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__);
+		*status = 1;
+	}
+
+	return err;
+exit:
+	printk(KERN_ERR "%s: I/O Error\n", __func__);
+	return err;
+}
+
+static int tda665x_set_state(struct dvb_frontend *fe,
+			     enum tuner_param param,
+			     struct tuner_state *tstate)
+{
+	struct tda665x_state *state = fe->tuner_priv;
+	const struct tda665x_config *config = state->config;
+	u32 frequency, status = 0;
+	u8 buf[4];
+	int err = 0;
+
+	if (param & DVBFE_TUNER_FREQUENCY) {
+
+		frequency = tstate->frequency;
+		if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) {
+			printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
+			return -EINVAL;
+		}
+
+		frequency += config->frequency_offst;
+		frequency *= config->ref_multiplier;
+		frequency += config->ref_divider >> 1;
+		frequency /= config->ref_divider;
+
+		buf[0] = (u8) (frequency & 0x7f00) >> 8;
+		buf[1] = (u8) (frequency & 0x00ff) >> 0;
+		buf[2] = 0x80 | 0x40 | 0x02;
+		buf[3] = 0x00;
+
+		/* restore frequency */
+		frequency = tstate->frequency;
+
+		if (frequency < 153000000) {
+			/* VHF-L */
+			buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */
+			if (frequency < 68000000)
+				buf[3] |= 0x40; /* 83uA */
+			if (frequency < 1040000000)
+				buf[3] |= 0x60; /* 122uA */
+			if (frequency < 1250000000)
+				buf[3] |= 0x80; /* 163uA */
+			else
+				buf[3] |= 0xa0; /* 254uA */
+		} else if (frequency < 438000000) {
+			/* VHF-H */
+			buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */
+			if (frequency < 230000000)
+				buf[3] |= 0x40;
+			if (frequency < 300000000)
+				buf[3] |= 0x60;
+			else
+				buf[3] |= 0x80;
+		} else {
+			/* UHF */
+			buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */
+			if (frequency < 470000000)
+				buf[3] |= 0x60;
+			if (frequency < 526000000)
+				buf[3] |= 0x80;
+			else
+				buf[3] |= 0xa0;
+		}
+
+		/* Set params */
+		err = tda665x_write(state, buf, 5);
+		if (err < 0)
+			goto exit;
+
+		/* sleep for some time */
+		printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
+		msleep(20);
+		/* check status */
+		err = tda665x_get_status(fe, &status);
+		if (err < 0)
+			goto exit;
+
+		if (status == 1) {
+			printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status);
+			state->frequency = frequency; /* cache successful state */
+		} else {
+			printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status);
+		}
+	} else {
+		printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+		return -EINVAL;
+	}
+
+	return 0;
+exit:
+	printk(KERN_ERR "%s: I/O Error\n", __func__);
+	return err;
+}
+
+static int tda665x_release(struct dvb_frontend *fe)
+{
+	struct tda665x_state *state = fe->tuner_priv;
+
+	fe->tuner_priv = NULL;
+	kfree(state);
+	return 0;
+}
+
+static struct dvb_tuner_ops tda665x_ops = {
+
+	.set_state	= tda665x_set_state,
+	.get_state	= tda665x_get_state,
+	.get_status	= tda665x_get_status,
+	.release	= tda665x_release
+};
+
+struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+				    const struct tda665x_config *config,
+				    struct i2c_adapter *i2c)
+{
+	struct tda665x_state *state = NULL;
+	struct dvb_tuner_info *info;
+
+	state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL);
+	if (state == NULL)
+		goto exit;
+
+	state->config		= config;
+	state->i2c		= i2c;
+	state->fe		= fe;
+	fe->tuner_priv		= state;
+	fe->ops.tuner_ops	= tda665x_ops;
+	info			 = &fe->ops.tuner_ops.info;
+
+	memcpy(info->name, config->name, sizeof(config->name));
+	info->frequency_min	= config->frequency_min;
+	info->frequency_max	= config->frequency_max;
+	info->frequency_step	= config->frequency_offst;
+
+	printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name);
+
+	return fe;
+
+exit:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(tda665x_attach);
+
+MODULE_DESCRIPTION("TDA665x driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h
new file mode 100644
index 0000000..ec7927a
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda665x.h
@@ -0,0 +1,52 @@
+/*
+	TDA665x tuner driver
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __TDA665x_H
+#define __TDA665x_H
+
+struct tda665x_config {
+	char name[128];
+
+	u8	addr;
+	u32	frequency_min;
+	u32	frequency_max;
+	u32	frequency_offst;
+	u32	ref_multiplier;
+	u32	ref_divider;
+};
+
+#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE))
+
+extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+					   const struct tda665x_config *config,
+					   struct i2c_adapter *i2c);
+
+#else
+
+static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe,
+						  const struct tda665x_config *config,
+						  struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+#endif /* CONFIG_DVB_TDA665x */
+
+#endif /* __TDA665x_H */
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
new file mode 100644
index 0000000..f7b72a3
--- /dev/null
+++ b/drivers/media/dvb/mantis/Kconfig
@@ -0,0 +1,32 @@
+config MANTIS_CORE
+	tristate "Mantis/Hopper PCI bridge based devices"
+	depends on PCI && I2C && INPUT
+
+	help
+	  Support for PCI cards based on the Mantis and Hopper PCi bridge.
+
+	  Say Y if you own such a device and want to use it.
+
+config DVB_MANTIS
+	tristate "MANTIS based cards"
+	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+	select DVB_MB86A16
+	select DVB_ZL10353
+	select DVB_STV0299
+	select DVB_PLL
+	help
+	  Support for PCI cards based on the Mantis PCI bridge.
+	  Say Y when you have a Mantis based DVB card and want to use it.
+
+	  If unsure say N.
+
+config DVB_HOPPER
+	tristate "HOPPER based cards"
+	depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+	select DVB_ZL10353
+	select DVB_PLL
+	help
+	  Support for PCI cards based on the Hopper  PCI bridge.
+	  Say Y when you have a Hopper based DVB card and want to use it.
+
+	  If unsure say N
diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile
new file mode 100644
index 0000000..98dc5cd
--- /dev/null
+++ b/drivers/media/dvb/mantis/Makefile
@@ -0,0 +1,28 @@
+mantis_core-objs :=	mantis_ioc.o	\
+			mantis_uart.o	\
+			mantis_dma.o	\
+			mantis_pci.o	\
+			mantis_i2c.o	\
+			mantis_dvb.o	\
+			mantis_evm.o	\
+			mantis_hif.o	\
+			mantis_ca.o	\
+			mantis_pcmcia.o	\
+			mantis_input.o
+
+mantis-objs	:=	mantis_cards.o	\
+			mantis_vp1033.o	\
+			mantis_vp1034.o	\
+			mantis_vp1041.o	\
+			mantis_vp2033.o	\
+			mantis_vp2040.o	\
+			mantis_vp3030.o
+
+hopper-objs	:=	hopper_cards.o	\
+			hopper_vp3028.o
+
+obj-$(CONFIG_MANTIS_CORE)	+= mantis_core.o
+obj-$(CONFIG_DVB_MANTIS)	+= mantis.o
+obj-$(CONFIG_DVB_HOPPER)	+= hopper.o
+
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
new file mode 100644
index 0000000..d073c61
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -0,0 +1,275 @@
+/*
+	Hopper PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "hopper_vp3028.h"
+#include "mantis_dma.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+#define DRIVER_NAME	"Hopper"
+
+static char *label[10] = {
+	"DMA",
+	"IRQ-0",
+	"IRQ-1",
+	"OCERR",
+	"PABRT",
+	"RIPRR",
+	"PPERR",
+	"FTRGT",
+	"RISCI",
+	"RACK"
+};
+
+static int devs;
+
+static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
+{
+	u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+	u32 rst_stat = 0, rst_mask = 0;
+
+	struct mantis_pci *mantis;
+	struct mantis_ca *ca;
+
+	mantis = (struct mantis_pci *) dev_id;
+	if (unlikely(mantis == NULL)) {
+		dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+		return IRQ_NONE;
+	}
+	ca = mantis->mantis_ca;
+
+	stat = mmread(MANTIS_INT_STAT);
+	mask = mmread(MANTIS_INT_MASK);
+	mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+	if (!(stat & mask))
+		return IRQ_NONE;
+
+	rst_mask  = MANTIS_GPIF_WRACK  |
+		    MANTIS_GPIF_OTHERR |
+		    MANTIS_SBUF_WSTO   |
+		    MANTIS_GPIF_EXTIRQ;
+
+	rst_stat  = mmread(MANTIS_GPIF_STATUS);
+	rst_stat &= rst_mask;
+	mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+	mantis->mantis_int_stat = stat;
+	mantis->mantis_int_mask = mask;
+	dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+	if (stat & MANTIS_INT_RISCEN) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+	}
+	if (stat & MANTIS_INT_IRQ0) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+		mantis->gpif_status = rst_stat;
+		wake_up(&ca->hif_write_wq);
+		schedule_work(&ca->hif_evm_work);
+	}
+	if (stat & MANTIS_INT_IRQ1) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+		schedule_work(&mantis->uart_work);
+	}
+	if (stat & MANTIS_INT_OCERR) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+	}
+	if (stat & MANTIS_INT_PABORT) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+	}
+	if (stat & MANTIS_INT_RIPERR) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+	}
+	if (stat & MANTIS_INT_PPERR) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+	}
+	if (stat & MANTIS_INT_FTRGT) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+	}
+	if (stat & MANTIS_INT_RISCI) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+		mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+		tasklet_schedule(&mantis->tasklet);
+	}
+	if (stat & MANTIS_INT_I2CDONE) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+		wake_up(&mantis->i2c_wq);
+	}
+	mmwrite(stat, MANTIS_INT_STAT);
+	stat &= ~(MANTIS_INT_RISCEN   | MANTIS_INT_I2CDONE |
+		  MANTIS_INT_I2CRACK  | MANTIS_INT_PCMCIA7 |
+		  MANTIS_INT_PCMCIA6  | MANTIS_INT_PCMCIA5 |
+		  MANTIS_INT_PCMCIA4  | MANTIS_INT_PCMCIA3 |
+		  MANTIS_INT_PCMCIA2  | MANTIS_INT_PCMCIA1 |
+		  MANTIS_INT_PCMCIA0  | MANTIS_INT_IRQ1	   |
+		  MANTIS_INT_IRQ0     | MANTIS_INT_OCERR   |
+		  MANTIS_INT_PABORT   | MANTIS_INT_RIPERR  |
+		  MANTIS_INT_PPERR    | MANTIS_INT_FTRGT   |
+		  MANTIS_INT_RISCI);
+
+	if (stat)
+		dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+	dprintk(MANTIS_DEBUG, 0, "\n");
+	return IRQ_HANDLED;
+}
+
+static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+	struct mantis_pci *mantis;
+	struct mantis_hwconfig *config;
+	int err = 0;
+
+	mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+	if (mantis == NULL) {
+		printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+		err = -ENOMEM;
+		goto fail0;
+	}
+
+	mantis->num		= devs;
+	mantis->verbose		= verbose;
+	mantis->pdev		= pdev;
+	config			= (struct mantis_hwconfig *) pci_id->driver_data;
+	config->irq_handler	= &hopper_irq_handler;
+	mantis->hwconfig	= config;
+
+	err = mantis_pci_init(mantis);
+	if (err) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+		goto fail1;
+	}
+
+	err = mantis_stream_control(mantis, STREAM_TO_HIF);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+		goto fail1;
+	}
+
+	err = mantis_i2c_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+		goto fail2;
+	}
+
+	err = mantis_get_mac(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+		goto fail2;
+	}
+
+	err = mantis_dma_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+		goto fail3;
+	}
+
+	err = mantis_dvb_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+		goto fail4;
+	}
+	devs++;
+
+	return err;
+
+fail4:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+	mantis_dma_exit(mantis);
+
+fail3:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+	mantis_i2c_exit(mantis);
+
+fail2:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+	mantis_pci_exit(mantis);
+
+fail1:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+	kfree(mantis);
+
+fail0:
+	return err;
+}
+
+static void __devexit hopper_pci_remove(struct pci_dev *pdev)
+{
+	struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+	if (mantis) {
+		mantis_dvb_exit(mantis);
+		mantis_dma_exit(mantis);
+		mantis_i2c_exit(mantis);
+		mantis_pci_exit(mantis);
+		kfree(mantis);
+	}
+	return;
+
+}
+
+static struct pci_device_id hopper_pci_table[] = {
+	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
+	{ }
+};
+
+static struct pci_driver hopper_pci_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= hopper_pci_table,
+	.probe		= hopper_pci_probe,
+	.remove		= hopper_pci_remove,
+};
+
+static int __devinit hopper_init(void)
+{
+	return pci_register_driver(&hopper_pci_driver);
+}
+
+static void __devexit hopper_exit(void)
+{
+	return pci_unregister_driver(&hopper_pci_driver);
+}
+
+module_init(hopper_init);
+module_exit(hopper_exit);
+
+MODULE_DESCRIPTION("HOPPER driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
new file mode 100644
index 0000000..96674c7
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_vp3028.c
@@ -0,0 +1,88 @@
+/*
+	Hopper VP-3028 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "hopper_vp3028.h"
+
+struct zl10353_config hopper_vp3028_config = {
+	.demod_address	= 0x0f,
+};
+
+#define MANTIS_MODEL_NAME	"VP-3028"
+#define MANTIS_DEV_TYPE		"DVB-T"
+
+static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+	struct mantis_hwconfig *config	= mantis->hwconfig;
+	int err = 0;
+
+	gpio_set_bits(mantis, config->reset, 0);
+	msleep(100);
+	err = mantis_frontend_power(mantis, POWER_ON);
+	msleep(100);
+	gpio_set_bits(mantis, config->reset, 1);
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		msleep(250);
+		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+		fe = zl10353_attach(&hopper_vp3028_config, adapter);
+
+		if (!fe)
+			return -1;
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp3028_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_188,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp3028_frontend_init,
+	.power		= GPIF_A00,
+	.reset		= GPIF_A03,
+};
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h
new file mode 100644
index 0000000..5723949
--- /dev/null
+++ b/drivers/media/dvb/mantis/hopper_vp3028.h
@@ -0,0 +1,30 @@
+/*
+	Hopper VP-3028 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3028_DVB_T	0x0028
+
+extern struct mantis_hwconfig vp3028_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c
new file mode 100644
index 0000000..403ce04
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ca.c
@@ -0,0 +1,207 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+#include "mantis_ca.h"
+
+static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return mantis_hif_read_mem(ca, addr);
+}
+
+static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return mantis_hif_write_mem(ca, addr, data);
+}
+
+static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return mantis_hif_read_iom(ca, addr);
+}
+
+static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	return mantis_hif_write_iom(ca, addr, data);
+}
+
+static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
+	udelay(500); /* Wait.. */
+	mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
+	udelay(500);
+	mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */
+	msleep(1000);
+	dvb_ca_en50221_camready_irq(&ca->en50221, 0);
+
+	return 0;
+}
+
+static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
+
+	return 0;
+}
+
+static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
+/*	mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
+
+	return 0;
+}
+
+static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
+{
+	struct mantis_ca *ca = en50221->data;
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
+
+	if (ca->slot_state == MODULE_INSERTED) {
+		dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
+		return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+	} else {
+		dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
+	}
+
+	return 0;
+}
+
+int mantis_ca_init(struct mantis_pci *mantis)
+{
+	struct dvb_adapter *dvb_adapter	= &mantis->dvb_adapter;
+	struct mantis_ca *ca;
+	int ca_flags = 0, result;
+
+	dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
+	ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL);
+	if (!ca) {
+		dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
+		result = -ENOMEM;
+		goto err;
+	}
+
+	ca->ca_priv		= mantis;
+	mantis->mantis_ca	= ca;
+	ca_flags		= DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
+	/* register CA interface */
+	ca->en50221.owner		= THIS_MODULE;
+	ca->en50221.read_attribute_mem	= mantis_ca_read_attr_mem;
+	ca->en50221.write_attribute_mem	= mantis_ca_write_attr_mem;
+	ca->en50221.read_cam_control	= mantis_ca_read_cam_ctl;
+	ca->en50221.write_cam_control	= mantis_ca_write_cam_ctl;
+	ca->en50221.slot_reset		= mantis_ca_slot_reset;
+	ca->en50221.slot_shutdown	= mantis_ca_slot_shutdown;
+	ca->en50221.slot_ts_enable	= mantis_ts_control;
+	ca->en50221.poll_slot_status	= mantis_slot_status;
+	ca->en50221.data		= ca;
+
+	mutex_init(&ca->ca_lock);
+
+	init_waitqueue_head(&ca->hif_data_wq);
+	init_waitqueue_head(&ca->hif_opdone_wq);
+	init_waitqueue_head(&ca->hif_write_wq);
+
+	dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
+	result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
+	if (result != 0) {
+		dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
+		goto err;
+	}
+	dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
+	mantis_evmgr_init(ca);
+	return 0;
+err:
+	kfree(ca);
+	return result;
+}
+EXPORT_SYMBOL_GPL(mantis_ca_init);
+
+void mantis_ca_exit(struct mantis_pci *mantis)
+{
+	struct mantis_ca *ca = mantis->mantis_ca;
+
+	dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
+
+	mantis_evmgr_exit(ca);
+	dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
+	if (ca)
+		dvb_ca_en50221_release(&ca->en50221);
+
+	kfree(ca);
+}
+EXPORT_SYMBOL_GPL(mantis_ca_exit);
diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h
new file mode 100644
index 0000000..dc63e55
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ca.h
@@ -0,0 +1,27 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CA_H
+#define __MANTIS_CA_H
+
+extern int mantis_ca_init(struct mantis_pci *mantis);
+extern void mantis_ca_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CA_H */
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
new file mode 100644
index 0000000..16f1708
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -0,0 +1,305 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static int devs;
+
+#define DRIVER_NAME	"Mantis"
+
+static char *label[10] = {
+	"DMA",
+	"IRQ-0",
+	"IRQ-1",
+	"OCERR",
+	"PABRT",
+	"RIPRR",
+	"PPERR",
+	"FTRGT",
+	"RISCI",
+	"RACK"
+};
+
+static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
+{
+	u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+	u32 rst_stat = 0, rst_mask = 0;
+
+	struct mantis_pci *mantis;
+	struct mantis_ca *ca;
+
+	mantis = (struct mantis_pci *) dev_id;
+	if (unlikely(mantis == NULL)) {
+		dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+		return IRQ_NONE;
+	}
+	ca = mantis->mantis_ca;
+
+	stat = mmread(MANTIS_INT_STAT);
+	mask = mmread(MANTIS_INT_MASK);
+	mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+	if (!(stat & mask))
+		return IRQ_NONE;
+
+	rst_mask  = MANTIS_GPIF_WRACK  |
+		    MANTIS_GPIF_OTHERR |
+		    MANTIS_SBUF_WSTO   |
+		    MANTIS_GPIF_EXTIRQ;
+
+	rst_stat  = mmread(MANTIS_GPIF_STATUS);
+	rst_stat &= rst_mask;
+	mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+	mantis->mantis_int_stat = stat;
+	mantis->mantis_int_mask = mask;
+	dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+	if (stat & MANTIS_INT_RISCEN) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+	}
+	if (stat & MANTIS_INT_IRQ0) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+		mantis->gpif_status = rst_stat;
+		wake_up(&ca->hif_write_wq);
+		schedule_work(&ca->hif_evm_work);
+	}
+	if (stat & MANTIS_INT_IRQ1) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+		schedule_work(&mantis->uart_work);
+	}
+	if (stat & MANTIS_INT_OCERR) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+	}
+	if (stat & MANTIS_INT_PABORT) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+	}
+	if (stat & MANTIS_INT_RIPERR) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+	}
+	if (stat & MANTIS_INT_PPERR) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+	}
+	if (stat & MANTIS_INT_FTRGT) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+	}
+	if (stat & MANTIS_INT_RISCI) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+		mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+		tasklet_schedule(&mantis->tasklet);
+	}
+	if (stat & MANTIS_INT_I2CDONE) {
+		dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+		wake_up(&mantis->i2c_wq);
+	}
+	mmwrite(stat, MANTIS_INT_STAT);
+	stat &= ~(MANTIS_INT_RISCEN   | MANTIS_INT_I2CDONE |
+		  MANTIS_INT_I2CRACK  | MANTIS_INT_PCMCIA7 |
+		  MANTIS_INT_PCMCIA6  | MANTIS_INT_PCMCIA5 |
+		  MANTIS_INT_PCMCIA4  | MANTIS_INT_PCMCIA3 |
+		  MANTIS_INT_PCMCIA2  | MANTIS_INT_PCMCIA1 |
+		  MANTIS_INT_PCMCIA0  | MANTIS_INT_IRQ1	   |
+		  MANTIS_INT_IRQ0     | MANTIS_INT_OCERR   |
+		  MANTIS_INT_PABORT   | MANTIS_INT_RIPERR  |
+		  MANTIS_INT_PPERR    | MANTIS_INT_FTRGT   |
+		  MANTIS_INT_RISCI);
+
+	if (stat)
+		dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+	dprintk(MANTIS_DEBUG, 0, "\n");
+	return IRQ_HANDLED;
+}
+
+static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+	struct mantis_pci *mantis;
+	struct mantis_hwconfig *config;
+	int err = 0;
+
+	mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL);
+	if (mantis == NULL) {
+		printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+		err = -ENOMEM;
+		goto fail0;
+	}
+
+	mantis->num		= devs;
+	mantis->verbose		= verbose;
+	mantis->pdev		= pdev;
+	config			= (struct mantis_hwconfig *) pci_id->driver_data;
+	config->irq_handler	= &mantis_irq_handler;
+	mantis->hwconfig	= config;
+
+	err = mantis_pci_init(mantis);
+	if (err) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+		goto fail1;
+	}
+
+	err = mantis_stream_control(mantis, STREAM_TO_HIF);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+		goto fail1;
+	}
+
+	err = mantis_i2c_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+		goto fail2;
+	}
+
+	err = mantis_get_mac(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+		goto fail2;
+	}
+
+	err = mantis_dma_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+		goto fail3;
+	}
+
+	err = mantis_dvb_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+		goto fail4;
+	}
+	err = mantis_uart_init(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err);
+		goto fail6;
+	}
+
+	devs++;
+
+	return err;
+
+
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err);
+	mantis_uart_exit(mantis);
+
+fail6:
+fail4:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+	mantis_dma_exit(mantis);
+
+fail3:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+	mantis_i2c_exit(mantis);
+
+fail2:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+	mantis_pci_exit(mantis);
+
+fail1:
+	dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+	kfree(mantis);
+
+fail0:
+	return err;
+}
+
+static void __devexit mantis_pci_remove(struct pci_dev *pdev)
+{
+	struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+	if (mantis) {
+
+		mantis_uart_exit(mantis);
+		mantis_dvb_exit(mantis);
+		mantis_dma_exit(mantis);
+		mantis_i2c_exit(mantis);
+		mantis_pci_exit(mantis);
+		kfree(mantis);
+	}
+	return;
+}
+
+static struct pci_device_id mantis_pci_table[] = {
+	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
+	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
+	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
+	MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
+	MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
+	MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
+	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
+	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
+	MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
+	MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config),
+	MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
+	{ }
+};
+
+static struct pci_driver mantis_pci_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= mantis_pci_table,
+	.probe		= mantis_pci_probe,
+	.remove		= mantis_pci_remove,
+};
+
+static int __devinit mantis_init(void)
+{
+	return pci_register_driver(&mantis_pci_driver);
+}
+
+static void __devexit mantis_exit(void)
+{
+	return pci_unregister_driver(&mantis_pci_driver);
+}
+
+module_init(mantis_init);
+module_exit(mantis_exit);
+
+MODULE_DESCRIPTION("MANTIS driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
new file mode 100644
index 0000000..d0b645a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -0,0 +1,179 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_COMMON_H
+#define __MANTIS_COMMON_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+#include "mantis_uart.h"
+
+#include "mantis_link.h"
+
+#define MANTIS_ERROR		0
+#define MANTIS_NOTICE		1
+#define MANTIS_INFO		2
+#define MANTIS_DEBUG		3
+#define MANTIS_TMG		9
+
+#define dprintk(y, z, format, arg...) do {								\
+	if (z) {											\
+		if	((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y))			\
+			printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
+		else if	((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y))			\
+			printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
+		else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y))			\
+			printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
+		else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y))			\
+			printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
+		else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y))			\
+			printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg);	\
+	} else {											\
+		if (mantis->verbose > y)								\
+			printk(format , ##arg);								\
+	}												\
+} while(0)
+
+#define mwrite(dat, addr)	writel((dat), addr)
+#define mread(addr)		readl(addr)
+
+#define mmwrite(dat, addr)	mwrite((dat), (mantis->mmio + (addr)))
+#define mmread(addr)		mread(mantis->mmio + (addr))
+
+#define MANTIS_TS_188		0
+#define MANTIS_TS_204		1
+
+#define TWINHAN_TECHNOLOGIES	0x1822
+#define MANTIS			0x4e35
+
+#define TECHNISAT		0x1ae4
+#define TERRATEC		0x153b
+
+#define MAKE_ENTRY(__subven, __subdev, __configptr) {			\
+		.vendor		= TWINHAN_TECHNOLOGIES,			\
+		.device		= MANTIS,				\
+		.subvendor	= (__subven),				\
+		.subdevice	= (__subdev),				\
+		.driver_data	= (unsigned long) (__configptr)		\
+}
+
+enum mantis_i2c_mode {
+	MANTIS_PAGE_MODE = 0,
+	MANTIS_BYTE_MODE,
+};
+
+struct mantis_pci;
+
+struct mantis_hwconfig {
+	char			*model_name;
+	char			*dev_type;
+	u32			ts_size;
+
+	enum mantis_baud	baud_rate;
+	enum mantis_parity	parity;
+	u32			bytes;
+
+	irqreturn_t (*irq_handler)(int irq, void *dev_id);
+	int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+
+	u8			power;
+	u8			reset;
+
+	enum mantis_i2c_mode	i2c_mode;
+};
+
+struct mantis_pci {
+	unsigned int		verbose;
+
+	/*	PCI stuff		*/
+	u16			vendor_id;
+	u16			device_id;
+	u16			subsystem_vendor;
+	u16			subsystem_device;
+
+	u8			latency;
+
+	struct pci_dev		*pdev;
+
+	unsigned long		mantis_addr;
+	void __iomem		*mmio;
+
+	u8			irq;
+	u8			revision;
+
+	unsigned int		num;
+
+	/*	RISC Core		*/
+	u32			finished_block;
+	u32			last_block;
+	u32			line_bytes;
+	u32			line_count;
+	u32			risc_pos;
+	u8			*buf_cpu;
+	dma_addr_t		buf_dma;
+	u32			*risc_cpu;
+	dma_addr_t		risc_dma;
+
+	struct tasklet_struct	tasklet;
+
+	struct i2c_adapter	adapter;
+	int			i2c_rc;
+	wait_queue_head_t	i2c_wq;
+	struct mutex		i2c_lock;
+
+	/*	DVB stuff		*/
+	struct dvb_adapter	dvb_adapter;
+	struct dvb_frontend	*fe;
+	struct dvb_demux	demux;
+	struct dmxdev		dmxdev;
+	struct dmx_frontend	fe_hw;
+	struct dmx_frontend	fe_mem;
+	struct dvb_net		dvbnet;
+
+	u8			feeds;
+
+	struct mantis_hwconfig	*hwconfig;
+
+	u32			mantis_int_stat;
+	u32			mantis_int_mask;
+
+	/*	board specific		*/
+	u8			mac_address[8];
+	u32			sub_vendor_id;
+	u32			sub_device_id;
+
+	 /*	A12 A13 A14		*/
+	u32			gpio_status;
+
+	u32			gpif_status;
+
+	struct mantis_ca	*mantis_ca;
+
+	wait_queue_head_t	uart_wq;
+	struct work_struct	uart_work;
+	spinlock_t		uart_lock;
+
+	struct input_dev	*rc;
+};
+
+#define MANTIS_HIF_STATUS	(mantis->gpio_status)
+
+#endif /* __MANTIS_COMMON_H */
diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c
new file mode 100644
index 0000000..8113b23
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_core.c
@@ -0,0 +1,238 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_core.h"
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+	int err;
+	struct i2c_msg msg[] = {
+		{
+			.addr = 0x50,
+			.flags = 0,
+			.buf = data,
+			.len = 1
+		}, {
+			.addr = 0x50,
+			.flags = I2C_M_RD,
+			.buf = data,
+			.len = length
+		},
+	};
+
+	err = i2c_transfer(&mantis->adapter, msg, 2);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_ERROR, 1,
+			"ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+			err, data[0], data[1]);
+
+		return err;
+	}
+
+	return 0;
+}
+
+static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+	int err;
+
+	struct i2c_msg msg = {
+		.addr = 0x50,
+		.flags = 0,
+		.buf = data,
+		.len = length
+	};
+
+	err = i2c_transfer(&mantis->adapter, &msg, 1);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_ERROR, 1,
+			"ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
+			err, length, data[0], data[1]);
+
+		return err;
+	}
+
+	return 0;
+}
+
+static int get_mac_address(struct mantis_pci *mantis)
+{
+	int err;
+
+	mantis->mac_address[0] = 0x08;
+	err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error");
+
+		return err;
+	}
+	dprintk(verbose, MANTIS_ERROR, 0,
+		"    MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+		mantis->mac_address[0], mantis->mac_address[1],
+		mantis->mac_address[2],	mantis->mac_address[3],
+		mantis->mac_address[4], mantis->mac_address[5]);
+
+	return 0;
+}
+
+#define MANTIS_MODEL_UNKNOWN	"UNKNOWN"
+#define MANTIS_DEV_UNKNOWN	"UNKNOWN"
+
+struct mantis_hwconfig unknown_device = {
+	.model_name	= MANTIS_MODEL_UNKNOWN,
+	.dev_type	= MANTIS_DEV_UNKNOWN,
+};
+
+static void mantis_load_config(struct mantis_pci *mantis)
+{
+	switch (mantis->subsystem_device) {
+	case MANTIS_VP_1033_DVB_S:	/* VP-1033 */
+		mantis->hwconfig = &vp1033_mantis_config;
+		break;
+	case MANTIS_VP_1034_DVB_S:	/* VP-1034 */
+		mantis->hwconfig = &vp1034_mantis_config;
+		break;
+	case MANTIS_VP_1041_DVB_S2:	/* VP-1041 */
+	case TECHNISAT_SKYSTAR_HD2:
+		mantis->hwconfig = &vp1041_mantis_config;
+		break;
+	case MANTIS_VP_2033_DVB_C:	/* VP-2033 */
+		mantis->hwconfig = &vp2033_mantis_config;
+		break;
+	case MANTIS_VP_2040_DVB_C:	/* VP-2040 */
+	case TERRATEC_CINERGY_C_PCI:	/* VP-2040 clone */
+	case TECHNISAT_CABLESTAR_HD2:
+		mantis->hwconfig = &vp2040_mantis_config;
+		break;
+	case MANTIS_VP_3030_DVB_T:	/* VP-3030 */
+		mantis->hwconfig = &vp3030_mantis_config;
+		break;
+	default:
+		mantis->hwconfig = &unknown_device;
+		break;
+	}
+}
+
+int mantis_core_init(struct mantis_pci *mantis)
+{
+	int err = 0;
+
+	mantis_load_config(mantis);
+	dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+		mantis->hwconfig->model_name, mantis->hwconfig->dev_type,
+		mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn));
+	dprintk(verbose, MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
+		mantis->revision,
+		mantis->subsystem_vendor, mantis->subsystem_device);
+	dprintk(verbose, MANTIS_ERROR, 0,
+		"irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
+		mantis->pdev->irq, mantis->latency,
+		mantis->mantis_addr, mantis->mantis_mmio);
+
+	err = mantis_i2c_init(mantis);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed");
+		return err;
+	}
+	err = get_mac_address(mantis);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed");
+		return err;
+	}
+	err = mantis_dma_init(mantis);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed");
+		return err;
+	}
+	err = mantis_dvb_init(mantis);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed");
+		return err;
+	}
+	err = mantis_uart_init(mantis);
+	if (err < 0) {
+		dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed");
+		return err;
+	}
+
+	return 0;
+}
+
+int mantis_core_exit(struct mantis_pci *mantis)
+{
+	mantis_dma_stop(mantis);
+	dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping");
+
+	mantis_uart_exit(mantis);
+	dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed");
+
+	if (mantis_dma_exit(mantis) < 0)
+		dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
+	if (mantis_dvb_exit(mantis) < 0)
+		dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed");
+	if (mantis_i2c_exit(mantis) < 0)
+		dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed");
+
+	return 0;
+}
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+	u32 cur;
+
+	cur = mmread(MANTIS_GPIF_ADDR);
+	if (value)
+		mantis->gpio_status = cur | (1 << bitpos);
+	else
+		mantis->gpio_status = cur & (~(1 << bitpos));
+
+	mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+	mmwrite(0x00, MANTIS_GPIF_DOUT);
+	udelay(100);
+}
+
+/* direction = 0 , no CI passthrough ; 1 , CI passthrough */
+void mantis_set_direction(struct mantis_pci *mantis, int direction)
+{
+	u32 reg;
+
+	reg = mmread(0x28);
+	dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup");
+	if (direction == 0x01) {
+		/* to CI */
+		reg |= 0x04;
+		mmwrite(reg, 0x28);
+		reg &= 0xff - 0x04;
+		mmwrite(reg, 0x28);
+	} else {
+		reg &= 0xff - 0x04;
+		mmwrite(reg, 0x28);
+		reg |= 0x04;
+		mmwrite(reg, 0x28);
+	}
+}
diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h
new file mode 100644
index 0000000..833ee42
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_core.h
@@ -0,0 +1,57 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_CORE_H
+#define __MANTIS_CORE_H
+
+#include "mantis_common.h"
+
+
+#define FE_TYPE_SAT	0
+#define FE_TYPE_CAB	1
+#define FE_TYPE_TER	2
+
+#define FE_TYPE_TS204	0
+#define FE_TYPE_TS188	1
+
+
+struct vendorname {
+	u8  *sub_vendor_name;
+	u32 sub_vendor_id;
+};
+
+struct devicetype {
+	u8  *sub_device_name;
+	u32 sub_device_id;
+	u8  device_type;
+	u32 type_flags;
+};
+
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+extern int mantis_core_init(struct mantis_pci *mantis);
+extern int mantis_core_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CORE_H */
diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c
new file mode 100644
index 0000000..46202a4
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dma.c
@@ -0,0 +1,256 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#include <linux/vmalloc.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_dma.h"
+
+#define RISC_WRITE		(0x01 << 28)
+#define RISC_JUMP		(0x07 << 28)
+#define RISC_IRQ		(0x01 << 24)
+
+#define RISC_STATUS(status)	((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
+#define RISC_FLUSH()		(mantis->risc_pos = 0)
+#define RISC_INSTR(opcode)	(mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode))
+
+#define MANTIS_BUF_SIZE		(64 * 1024)
+#define MANTIS_BLOCK_BYTES	(MANTIS_BUF_SIZE >> 4)
+#define MANTIS_BLOCK_COUNT	(1 << 4)
+#define MANTIS_RISC_SIZE	PAGE_SIZE
+
+int mantis_dma_exit(struct mantis_pci *mantis)
+{
+	if (mantis->buf_cpu) {
+		dprintk(MANTIS_ERROR, 1,
+			"DMA=0x%lx cpu=0x%p size=%d",
+			(unsigned long) mantis->buf_dma,
+			 mantis->buf_cpu,
+			 MANTIS_BUF_SIZE);
+
+		pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE,
+				    mantis->buf_cpu, mantis->buf_dma);
+
+		mantis->buf_cpu = NULL;
+	}
+	if (mantis->risc_cpu) {
+		dprintk(MANTIS_ERROR, 1,
+			"RISC=0x%lx cpu=0x%p size=%lx",
+			(unsigned long) mantis->risc_dma,
+			mantis->risc_cpu,
+			MANTIS_RISC_SIZE);
+
+		pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE,
+				    mantis->risc_cpu, mantis->risc_dma);
+
+		mantis->risc_cpu = NULL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_exit);
+
+static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
+{
+	if (!mantis->buf_cpu) {
+		mantis->buf_cpu = pci_alloc_consistent(mantis->pdev,
+						       MANTIS_BUF_SIZE,
+						       &mantis->buf_dma);
+		if (!mantis->buf_cpu) {
+			dprintk(MANTIS_ERROR, 1,
+				"DMA buffer allocation failed");
+
+			goto err;
+		}
+		dprintk(MANTIS_ERROR, 1,
+			"DMA=0x%lx cpu=0x%p size=%d",
+			(unsigned long) mantis->buf_dma,
+			mantis->buf_cpu, MANTIS_BUF_SIZE);
+	}
+	if (!mantis->risc_cpu) {
+		mantis->risc_cpu = pci_alloc_consistent(mantis->pdev,
+							MANTIS_RISC_SIZE,
+							&mantis->risc_dma);
+
+		if (!mantis->risc_cpu) {
+			dprintk(MANTIS_ERROR, 1,
+				"RISC program allocation failed");
+
+			mantis_dma_exit(mantis);
+
+			goto err;
+		}
+		dprintk(MANTIS_ERROR, 1,
+			"RISC=0x%lx cpu=0x%p size=%lx",
+			(unsigned long) mantis->risc_dma,
+			mantis->risc_cpu, MANTIS_RISC_SIZE);
+	}
+
+	return 0;
+err:
+	dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
+	return -ENOMEM;
+}
+
+static inline int mantis_calc_lines(struct mantis_pci *mantis)
+{
+	mantis->line_bytes = MANTIS_BLOCK_BYTES;
+	mantis->line_count = MANTIS_BLOCK_COUNT;
+
+	while (mantis->line_bytes > 4095) {
+		mantis->line_bytes >>= 1;
+		mantis->line_count <<= 1;
+	}
+
+	dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
+		MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count);
+
+	if (mantis->line_count > 255) {
+		dprintk(MANTIS_ERROR, 1, "Buffer size error");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int mantis_dma_init(struct mantis_pci *mantis)
+{
+	int err = 0;
+
+	dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
+	if (mantis_alloc_buffers(mantis) < 0) {
+		dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
+
+		/* Stop RISC Engine */
+		mmwrite(0, MANTIS_DMA_CTL);
+
+		goto err;
+	}
+	err = mantis_calc_lines(mantis);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed");
+
+		goto err;
+	}
+
+	return 0;
+err:
+	return err;
+}
+EXPORT_SYMBOL_GPL(mantis_dma_init);
+
+static inline void mantis_risc_program(struct mantis_pci *mantis)
+{
+	u32 buf_pos = 0;
+	u32 line;
+
+	dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
+	RISC_FLUSH();
+
+	dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
+		mantis->line_count, mantis->line_bytes);
+
+	for (line = 0; line < mantis->line_count; line++) {
+		dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
+		if (!(buf_pos % MANTIS_BLOCK_BYTES)) {
+			RISC_INSTR(RISC_WRITE	|
+				   RISC_IRQ	|
+				   RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) +
+				   (MANTIS_BLOCK_COUNT - 1)) %
+				    MANTIS_BLOCK_COUNT) |
+				    mantis->line_bytes);
+		} else {
+			RISC_INSTR(RISC_WRITE	| mantis->line_bytes);
+		}
+		RISC_INSTR(mantis->buf_dma + buf_pos);
+		buf_pos += mantis->line_bytes;
+	}
+	RISC_INSTR(RISC_JUMP);
+	RISC_INSTR(mantis->risc_dma);
+}
+
+void mantis_dma_start(struct mantis_pci *mantis)
+{
+	dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
+
+	mantis_risc_program(mantis);
+	mmwrite(mantis->risc_dma, MANTIS_RISC_START);
+	mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+	mmwrite(0, MANTIS_DMA_CTL);
+	mantis->last_block = mantis->finished_block = 0;
+
+	mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
+
+	mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN
+			       | MANTIS_RISC_EN, MANTIS_DMA_CTL);
+
+}
+
+void mantis_dma_stop(struct mantis_pci *mantis)
+{
+	u32 stat = 0, mask = 0;
+
+	stat = mmread(MANTIS_INT_STAT);
+	mask = mmread(MANTIS_INT_MASK);
+	dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
+
+	mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
+
+	mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN |
+					    MANTIS_DCAP_EN |
+					    MANTIS_RISC_EN)), MANTIS_DMA_CTL);
+
+	mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT);
+
+	mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI |
+					    MANTIS_INT_RISCEN), MANTIS_INT_MASK);
+}
+
+
+void mantis_dma_xfer(unsigned long data)
+{
+	struct mantis_pci *mantis = (struct mantis_pci *) data;
+	struct mantis_hwconfig *config = mantis->hwconfig;
+
+	while (mantis->last_block != mantis->finished_block) {
+		dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
+			mantis->last_block, mantis->finished_block);
+
+		(config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter)
+		(&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES);
+		mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT;
+	}
+}
diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h
new file mode 100644
index 0000000..6be00fa
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dma.h
@@ -0,0 +1,30 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DMA_H
+#define __MANTIS_DMA_H
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern void mantis_dma_xfer(unsigned long data);
+
+#endif /* __MANTIS_DMA_H */
diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c
new file mode 100644
index 0000000..99d82ee
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dvb.c
@@ -0,0 +1,296 @@
+/*
+	Mantis PCI bridge driver
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+
+	switch (power) {
+	case POWER_ON:
+		dprintk(MANTIS_DEBUG, 1, "Power ON");
+		gpio_set_bits(mantis, config->power, POWER_ON);
+		msleep(100);
+		gpio_set_bits(mantis, config->power, POWER_ON);
+		msleep(100);
+		break;
+
+	case POWER_OFF:
+		dprintk(MANTIS_DEBUG, 1, "Power OFF");
+		gpio_set_bits(mantis, config->power, POWER_OFF);
+		msleep(100);
+		break;
+
+	default:
+		dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power);
+		return -1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_power);
+
+void mantis_frontend_soft_reset(struct mantis_pci *mantis)
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+
+	dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
+	gpio_set_bits(mantis, config->reset, 0);
+	msleep(100);
+	gpio_set_bits(mantis, config->reset, 0);
+	msleep(100);
+	gpio_set_bits(mantis, config->reset, 1);
+	msleep(100);
+	gpio_set_bits(mantis, config->reset, 1);
+	msleep(100);
+
+	return;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset);
+
+static int mantis_frontend_shutdown(struct mantis_pci *mantis)
+{
+	int err;
+
+	mantis_frontend_soft_reset(mantis);
+	err = mantis_frontend_power(mantis, POWER_OFF);
+	if (err != 0) {
+		dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+	struct mantis_pci *mantis = dvbdmx->priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed");
+	if (!dvbdmx->dmx.frontend) {
+		dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+		return -EINVAL;
+	}
+
+	mantis->feeds++;
+	dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d",	mantis->feeds);
+
+	if (mantis->feeds == 1)	 {
+		dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
+		mantis_dma_start(mantis);
+	}
+
+	return mantis->feeds;
+}
+
+static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+	struct mantis_pci *mantis = dvbdmx->priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
+	if (!dvbdmx->dmx.frontend) {
+		dprintk(MANTIS_DEBUG, 1, "no frontend ?");
+		return -EINVAL;
+	}
+
+	mantis->feeds--;
+	if (mantis->feeds == 0) {
+		dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
+		mantis_dma_stop(mantis);
+	}
+
+	return 0;
+}
+
+int __devinit mantis_dvb_init(struct mantis_pci *mantis)
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+	int result = -1;
+
+	dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter");
+
+	result = dvb_register_adapter(&mantis->dvb_adapter,
+				      "Mantis DVB adapter",
+				      THIS_MODULE,
+				      &mantis->pdev->dev,
+				      adapter_nr);
+
+	if (result < 0) {
+
+		dprintk(MANTIS_ERROR, 1, "Error registering adapter");
+		return -ENODEV;
+	}
+
+	mantis->dvb_adapter.priv	= mantis;
+	mantis->demux.dmx.capabilities	= DMX_TS_FILTERING	|
+					 DMX_SECTION_FILTERING	|
+					 DMX_MEMORY_BASED_FILTERING;
+
+	mantis->demux.priv		= mantis;
+	mantis->demux.filternum		= 256;
+	mantis->demux.feednum		= 256;
+	mantis->demux.start_feed	= mantis_dvb_start_feed;
+	mantis->demux.stop_feed		= mantis_dvb_stop_feed;
+	mantis->demux.write_to_decoder	= NULL;
+
+	dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init");
+	result = dvb_dmx_init(&mantis->demux);
+	if (result < 0) {
+		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+
+		goto err0;
+	}
+
+	mantis->dmxdev.filternum	= 256;
+	mantis->dmxdev.demux		= &mantis->demux.dmx;
+	mantis->dmxdev.capabilities	= 0;
+	dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init");
+
+	result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter);
+	if (result < 0) {
+
+		dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result);
+		goto err1;
+	}
+
+	mantis->fe_hw.source		= DMX_FRONTEND_0;
+	result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+	if (result < 0) {
+
+		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+		goto err2;
+	}
+
+	mantis->fe_mem.source		= DMX_MEMORY_FE;
+	result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+	if (result < 0) {
+		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+		goto err3;
+	}
+
+	result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+	if (result < 0) {
+		dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
+		goto err4;
+	}
+
+	dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
+	tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
+	if (mantis->hwconfig) {
+		result = config->frontend_init(mantis, mantis->fe);
+		if (result < 0) {
+			dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
+			goto err5;
+		} else {
+			if (mantis->fe == NULL) {
+				dprintk(MANTIS_ERROR, 1, "FE <NULL>");
+				goto err5;
+			}
+
+			if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
+				dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed");
+
+				if (mantis->fe->ops.release)
+					mantis->fe->ops.release(mantis->fe);
+
+				mantis->fe = NULL;
+				goto err5;
+			}
+		}
+	}
+
+	return 0;
+
+	/* Error conditions ..	*/
+err5:
+	tasklet_kill(&mantis->tasklet);
+	dvb_net_release(&mantis->dvbnet);
+	dvb_unregister_frontend(mantis->fe);
+	dvb_frontend_detach(mantis->fe);
+err4:
+	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+
+err3:
+	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+err2:
+	dvb_dmxdev_release(&mantis->dmxdev);
+
+err1:
+	dvb_dmx_release(&mantis->demux);
+
+err0:
+	dvb_unregister_adapter(&mantis->dvb_adapter);
+
+	return result;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_init);
+
+int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
+{
+	int err;
+
+	if (mantis->fe) {
+		/* mantis_ca_exit(mantis); */
+		err = mantis_frontend_shutdown(mantis);
+		if (err != 0)
+			dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err);
+		dvb_unregister_frontend(mantis->fe);
+		dvb_frontend_detach(mantis->fe);
+	}
+
+	tasklet_kill(&mantis->tasklet);
+	dvb_net_release(&mantis->dvbnet);
+
+	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
+	mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+
+	dvb_dmxdev_release(&mantis->dmxdev);
+	dvb_dmx_release(&mantis->demux);
+
+	dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter");
+	dvb_unregister_adapter(&mantis->dvb_adapter);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_dvb_exit);
diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h
new file mode 100644
index 0000000..464199d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_dvb.h
@@ -0,0 +1,35 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_DVB_H
+#define __MANTIS_DVB_H
+
+enum mantis_power {
+	POWER_OFF	= 0,
+	POWER_ON	= 1
+};
+
+extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
+extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
+
+extern int mantis_dvb_init(struct mantis_pci *mantis);
+extern int mantis_dvb_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_DVB_H */
diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c
new file mode 100644
index 0000000..a7b369a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_evm.c
@@ -0,0 +1,117 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h"
+#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+static void mantis_hifevm_work(struct work_struct *work)
+{
+	struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work);
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	u32 gpif_stat, gpif_mask;
+
+	gpif_stat = mmread(MANTIS_GPIF_STATUS);
+	gpif_mask = mmread(MANTIS_GPIF_IRQCFG);
+
+	if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+		if (gpif_stat & MANTIS_CARD_PLUGIN) {
+			dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
+			mmwrite(0xdada0000, MANTIS_CARD_RESET);
+			mantis_event_cam_plugin(ca);
+			dvb_ca_en50221_camchange_irq(&ca->en50221,
+						     0,
+						     DVB_CA_EN50221_CAMCHANGE_INSERTED);
+		}
+	} else {
+		if (gpif_stat & MANTIS_CARD_PLUGOUT) {
+			dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
+			mmwrite(0xdada0000, MANTIS_CARD_RESET);
+			mantis_event_cam_unplug(ca);
+			dvb_ca_en50221_camchange_irq(&ca->en50221,
+						     0,
+						     DVB_CA_EN50221_CAMCHANGE_REMOVED);
+		}
+	}
+
+	if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
+
+	if (mantis->gpif_status & MANTIS_SBUF_WSTO)
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
+
+	if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
+
+	if (gpif_stat & MANTIS_SBUF_OVFLW)
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
+
+	if (gpif_stat & MANTIS_GPIF_BRRDY)
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
+
+	if (gpif_stat & MANTIS_GPIF_INTSTAT)
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
+
+	if (gpif_stat & MANTIS_SBUF_EMPTY)
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
+
+	if (gpif_stat & MANTIS_SBUF_OPDONE) {
+		dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
+		ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
+		ca->hif_event = MANTIS_SBUF_OPDONE;
+		wake_up(&ca->hif_opdone_wq);
+	}
+}
+
+int mantis_evmgr_init(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
+	INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
+	mantis_pcmcia_init(ca);
+	schedule_work(&ca->hif_evm_work);
+	mantis_hif_init(ca);
+	return 0;
+}
+
+void mantis_evmgr_exit(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
+	flush_scheduled_work();
+	mantis_hif_exit(ca);
+	mantis_pcmcia_exit(ca);
+}
diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c
new file mode 100644
index 0000000..7477dac
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_hif.c
@@ -0,0 +1,240 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_hif.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+
+#include "mantis_reg.h"
+
+
+static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+	int rc = 0;
+
+	if (wait_event_timeout(ca->hif_opdone_wq,
+			       ca->hif_event & MANTIS_SBUF_OPDONE,
+			       msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
+		rc = -EREMOTEIO;
+	}
+	dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
+	ca->hif_event &= ~MANTIS_SBUF_OPDONE;
+	return rc;
+}
+
+static int mantis_hif_write_wait(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+	u32 opdone = 0, timeout = 0;
+	int rc = 0;
+
+	if (wait_event_timeout(ca->hif_write_wq,
+			       mantis->gpif_status & MANTIS_GPIF_WRACK,
+			       msecs_to_jiffies(500)) == -ERESTARTSYS) {
+
+		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
+		rc = -EREMOTEIO;
+	}
+	dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
+	mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
+	while (!opdone) {
+		opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
+		udelay(500);
+		timeout++;
+		if (timeout > 100) {
+			dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
+			rc = -ETIMEDOUT;
+			break;
+		}
+	}
+	dprintk(MANTIS_DEBUG, 1, "HIF Write success");
+	return rc;
+}
+
+
+int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+	u32 hif_addr = 0, data, count = 4;
+
+	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
+	mutex_lock(&ca->ca_lock);
+	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+	hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+	hif_addr |=  MANTIS_HIF_STATUS;
+	hif_addr |=  addr;
+
+	mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+	mmwrite(count, MANTIS_GPIF_BRBYTES);
+	udelay(20);
+	mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+	if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
+		mutex_unlock(&ca->ca_lock);
+		return -EREMOTEIO;
+	}
+	data = mmread(MANTIS_GPIF_DIN);
+	mutex_unlock(&ca->ca_lock);
+	dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
+	return (data >> 24) & 0xff;
+}
+
+int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
+{
+	struct mantis_slot *slot = ca->slot;
+	struct mantis_pci *mantis = ca->ca_priv;
+	u32 hif_addr = 0;
+
+	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
+	mutex_lock(&ca->ca_lock);
+	hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+	hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
+	hif_addr |=  MANTIS_HIF_STATUS;
+	hif_addr |=  addr;
+
+	mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */
+	mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+	mmwrite(data, MANTIS_GPIF_DOUT);
+
+	if (mantis_hif_write_wait(ca) != 0) {
+		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+		mutex_unlock(&ca->ca_lock);
+		return -EREMOTEIO;
+	}
+	dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
+	mutex_unlock(&ca->ca_lock);
+
+	return 0;
+}
+
+int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+	u32 data, hif_addr = 0;
+
+	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
+	mutex_lock(&ca->ca_lock);
+	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+	hif_addr |=  MANTIS_GPIF_PCMCIAIOM;
+	hif_addr |=  MANTIS_HIF_STATUS;
+	hif_addr |=  addr;
+
+	mmwrite(hif_addr, MANTIS_GPIF_BRADDR);
+	mmwrite(1, MANTIS_GPIF_BRBYTES);
+	udelay(20);
+	mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
+
+	if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
+		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+		mutex_unlock(&ca->ca_lock);
+		return -EREMOTEIO;
+	}
+	data = mmread(MANTIS_GPIF_DIN);
+	dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
+	udelay(50);
+	mutex_unlock(&ca->ca_lock);
+
+	return (u8) data;
+}
+
+int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+	u32 hif_addr = 0;
+
+	dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
+	mutex_lock(&ca->ca_lock);
+	hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
+	hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
+	hif_addr |=  MANTIS_GPIF_PCMCIAIOM;
+	hif_addr |=  MANTIS_HIF_STATUS;
+	hif_addr |=  addr;
+
+	mmwrite(hif_addr, MANTIS_GPIF_ADDR);
+	mmwrite(data, MANTIS_GPIF_DOUT);
+
+	if (mantis_hif_write_wait(ca) != 0) {
+		dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+		mutex_unlock(&ca->ca_lock);
+		return -EREMOTEIO;
+	}
+	dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
+	mutex_unlock(&ca->ca_lock);
+	udelay(50);
+
+	return 0;
+}
+
+int mantis_hif_init(struct mantis_ca *ca)
+{
+	struct mantis_slot *slot = ca->slot;
+	struct mantis_pci *mantis = ca->ca_priv;
+	u32 irqcfg;
+
+	slot[0].slave_cfg = 0x70773028;
+	dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
+
+	mutex_lock(&ca->ca_lock);
+	irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+	irqcfg = MANTIS_MASK_BRRDY	|
+		 MANTIS_MASK_WRACK	|
+		 MANTIS_MASK_EXTIRQ	|
+		 MANTIS_MASK_WSTO	|
+		 MANTIS_MASK_OTHERR	|
+		 MANTIS_MASK_OVFLW;
+
+	mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+	mutex_unlock(&ca->ca_lock);
+
+	return 0;
+}
+
+void mantis_hif_exit(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+	u32 irqcfg;
+
+	dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
+	mutex_lock(&ca->ca_lock);
+	irqcfg = mmread(MANTIS_GPIF_IRQCFG);
+	irqcfg &= ~MANTIS_MASK_BRRDY;
+	mmwrite(irqcfg, MANTIS_GPIF_IRQCFG);
+	mutex_unlock(&ca->ca_lock);
+}
diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h
new file mode 100644
index 0000000..9094f9e
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_hif.h
@@ -0,0 +1,29 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_HIF_H
+#define __MANTIS_HIF_H
+
+#define MANTIS_HIF_MEMRD		1
+#define MANTIS_HIF_MEMWR		2
+#define MANTIS_HIF_IOMRD		3
+#define MANTIS_HIF_IOMWR		4
+
+#endif /* __MANTIS_HIF_H */
diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c
new file mode 100644
index 0000000..7870bcf
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_i2c.c
@@ -0,0 +1,267 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <asm/io.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_i2c.h"
+
+#define TRIALS			10000
+
+static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+	u32 rxd, i, stat, trials;
+
+	dprintk(MANTIS_INFO, 0, "        %s:  Address=[0x%02x] <R>[ ",
+		__func__, msg->addr);
+
+	for (i = 0; i < msg->len; i++) {
+		rxd = (msg->addr << 25) | (1 << 24)
+					| MANTIS_I2C_RATE_3
+					| MANTIS_I2C_STOP
+					| MANTIS_I2C_PGMODE;
+
+		if (i == (msg->len - 1))
+			rxd &= ~MANTIS_I2C_STOP;
+
+		mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+		mmwrite(rxd, MANTIS_I2CDATA_CTL);
+
+		/* wait for xfer completion */
+		for (trials = 0; trials < TRIALS; trials++) {
+			stat = mmread(MANTIS_INT_STAT);
+			if (stat & MANTIS_INT_I2CDONE)
+				break;
+		}
+
+		dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+		/* wait for xfer completion */
+		for (trials = 0; trials < TRIALS; trials++) {
+			stat = mmread(MANTIS_INT_STAT);
+			if (stat & MANTIS_INT_I2CRACK)
+				break;
+		}
+
+		dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+
+		rxd = mmread(MANTIS_I2CDATA_CTL);
+		msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
+		dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+	}
+	dprintk(MANTIS_INFO, 0, "]\n");
+
+	return 0;
+}
+
+static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg)
+{
+	int i;
+	u32 txd = 0, stat, trials;
+
+	dprintk(MANTIS_INFO, 0, "        %s: Address=[0x%02x] <W>[ ",
+		__func__, msg->addr);
+
+	for (i = 0; i < msg->len; i++) {
+		dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+		txd = (msg->addr << 25) | (msg->buf[i] << 8)
+					| MANTIS_I2C_RATE_3
+					| MANTIS_I2C_STOP
+					| MANTIS_I2C_PGMODE;
+
+		if (i == (msg->len - 1))
+			txd &= ~MANTIS_I2C_STOP;
+
+		mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
+		mmwrite(txd, MANTIS_I2CDATA_CTL);
+
+		/* wait for xfer completion */
+		for (trials = 0; trials < TRIALS; trials++) {
+			stat = mmread(MANTIS_INT_STAT);
+			if (stat & MANTIS_INT_I2CDONE)
+				break;
+		}
+
+		dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials);
+
+		/* wait for xfer completion */
+		for (trials = 0; trials < TRIALS; trials++) {
+			stat = mmread(MANTIS_INT_STAT);
+			if (stat & MANTIS_INT_I2CRACK)
+				break;
+		}
+
+		dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials);
+	}
+	dprintk(MANTIS_INFO, 0, "]\n");
+
+	return 0;
+}
+
+static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
+{
+	int ret = 0, i = 0, trials;
+	u32 stat, data, txd;
+	struct mantis_pci *mantis;
+	struct mantis_hwconfig *config;
+
+	mantis = i2c_get_adapdata(adapter);
+	BUG_ON(!mantis);
+	config = mantis->hwconfig;
+	BUG_ON(!config);
+
+	dprintk(MANTIS_DEBUG, 1, "Messages:%d", num);
+	mutex_lock(&mantis->i2c_lock);
+
+	while (i < num) {
+		/* Byte MODE */
+		if ((config->i2c_mode & MANTIS_BYTE_MODE) &&
+		    ((i + 1) < num)			&&
+		    (msgs[i].len < 2)			&&
+		    (msgs[i + 1].len < 2)		&&
+		    (msgs[i + 1].flags & I2C_M_RD)) {
+
+			dprintk(MANTIS_DEBUG, 0, "        Byte MODE:\n");
+
+			/* Read operation */
+			txd = msgs[i].addr << 25 | (0x1 << 24)
+						 | (msgs[i].buf[0] << 16)
+						 | MANTIS_I2C_RATE_3;
+
+			mmwrite(txd, MANTIS_I2CDATA_CTL);
+			/* wait for xfer completion */
+			for (trials = 0; trials < TRIALS; trials++) {
+				stat = mmread(MANTIS_INT_STAT);
+				if (stat & MANTIS_INT_I2CDONE)
+					break;
+			}
+
+			/* check for xfer completion */
+			if (stat & MANTIS_INT_I2CDONE) {
+				/* check xfer was acknowledged */
+				if (stat & MANTIS_INT_I2CRACK) {
+					data = mmread(MANTIS_I2CDATA_CTL);
+					msgs[i + 1].buf[0] = (data >> 8) & 0xff;
+					dprintk(MANTIS_DEBUG, 0, "        Byte <%d> RXD=0x%02x  [%02x]\n", 0x0, data, msgs[i + 1].buf[0]);
+				} else {
+					/* I/O error */
+					dprintk(MANTIS_ERROR, 1, "        I/O error, LINE:%d", __LINE__);
+					ret = -EIO;
+					break;
+				}
+			} else {
+				/* I/O error */
+				dprintk(MANTIS_ERROR, 1, "        I/O error, LINE:%d", __LINE__);
+				ret = -EIO;
+				break;
+			}
+			i += 2; /* Write/Read operation in one go */
+		}
+
+		if (i < num) {
+			if (msgs[i].flags & I2C_M_RD)
+				ret = mantis_i2c_read(mantis, &msgs[i]);
+			else
+				ret = mantis_i2c_write(mantis, &msgs[i]);
+
+			i++;
+			if (ret < 0)
+				goto bail_out;
+		}
+
+	}
+
+	mutex_unlock(&mantis->i2c_lock);
+
+	return num;
+
+bail_out:
+	mutex_unlock(&mantis->i2c_lock);
+	return ret;
+}
+
+static u32 mantis_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm mantis_algo = {
+	.master_xfer		= mantis_i2c_xfer,
+	.functionality		= mantis_i2c_func,
+};
+
+int __devinit mantis_i2c_init(struct mantis_pci *mantis)
+{
+	u32 intstat, intmask;
+	struct i2c_adapter *i2c_adapter = &mantis->adapter;
+	struct pci_dev *pdev		= mantis->pdev;
+
+	init_waitqueue_head(&mantis->i2c_wq);
+	mutex_init(&mantis->i2c_lock);
+	strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name));
+	i2c_set_adapdata(i2c_adapter, mantis);
+
+	i2c_adapter->owner	= THIS_MODULE;
+	i2c_adapter->class	= I2C_CLASS_TV_DIGITAL;
+	i2c_adapter->algo	= &mantis_algo;
+	i2c_adapter->algo_data	= NULL;
+	i2c_adapter->timeout	= 500;
+	i2c_adapter->retries	= 3;
+	i2c_adapter->dev.parent	= &pdev->dev;
+
+	mantis->i2c_rc		= i2c_add_adapter(i2c_adapter);
+	if (mantis->i2c_rc < 0)
+		return mantis->i2c_rc;
+
+	dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
+
+	intstat = mmread(MANTIS_INT_STAT);
+	intmask = mmread(MANTIS_INT_MASK);
+	mmwrite(intstat, MANTIS_INT_STAT);
+	dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+	intmask = mmread(MANTIS_INT_MASK);
+	mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_init);
+
+int mantis_i2c_exit(struct mantis_pci *mantis)
+{
+	u32 intmask;
+
+	dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt");
+	intmask = mmread(MANTIS_INT_MASK);
+	mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK);
+
+	dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
+	return i2c_del_adapter(&mantis->adapter);
+}
+EXPORT_SYMBOL_GPL(mantis_i2c_exit);
diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h
new file mode 100644
index 0000000..1342df2
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_i2c.h
@@ -0,0 +1,30 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_I2C_H
+#define __MANTIS_I2C_H
+
+#define I2C_STOP		(1 <<  0)
+#define I2C_READ		(1 <<  1)
+
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_I2C_H */
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
new file mode 100644
index 0000000..6a9df77
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -0,0 +1,148 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/input.h>
+#include <media/ir-common.h>
+#include <linux/pci.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+static struct ir_scancode mantis_ir_table[] = {
+	{ 0x29, KEY_POWER	},
+	{ 0x28, KEY_FAVORITES	},
+	{ 0x30, KEY_TEXT	},
+	{ 0x17, KEY_INFO	}, /* Preview */
+	{ 0x23, KEY_EPG		},
+	{ 0x3b, KEY_F22		}, /* Record List */
+	{ 0x3c, KEY_1		},
+	{ 0x3e, KEY_2		},
+	{ 0x39, KEY_3		},
+	{ 0x36, KEY_4		},
+	{ 0x22, KEY_5		},
+	{ 0x20, KEY_6		},
+	{ 0x32, KEY_7		},
+	{ 0x26, KEY_8		},
+	{ 0x24, KEY_9		},
+	{ 0x2a, KEY_0		},
+
+	{ 0x33, KEY_CANCEL	},
+	{ 0x2c, KEY_BACK	},
+	{ 0x15, KEY_CLEAR	},
+	{ 0x3f, KEY_TAB		},
+	{ 0x10, KEY_ENTER	},
+	{ 0x14, KEY_UP		},
+	{ 0x0d, KEY_RIGHT	},
+	{ 0x0e, KEY_DOWN	},
+	{ 0x11, KEY_LEFT	},
+
+	{ 0x21, KEY_VOLUMEUP	},
+	{ 0x35, KEY_VOLUMEDOWN	},
+	{ 0x3d, KEY_CHANNELDOWN	},
+	{ 0x3a, KEY_CHANNELUP	},
+	{ 0x2e, KEY_RECORD	},
+	{ 0x2b, KEY_PLAY	},
+	{ 0x13, KEY_PAUSE	},
+	{ 0x25, KEY_STOP	},
+
+	{ 0x1f, KEY_REWIND	},
+	{ 0x2d, KEY_FASTFORWARD	},
+	{ 0x1e, KEY_PREVIOUS	}, /* Replay |< */
+	{ 0x1d, KEY_NEXT	}, /* Skip   >| */
+
+	{ 0x0b, KEY_CAMERA	}, /* Capture */
+	{ 0x0f, KEY_LANGUAGE	}, /* SAP */
+	{ 0x18, KEY_MODE	}, /* PIP */
+	{ 0x12, KEY_ZOOM	}, /* Full screen */
+	{ 0x1c, KEY_SUBTITLE	},
+	{ 0x2f, KEY_MUTE	},
+	{ 0x16, KEY_F20		}, /* L/R */
+	{ 0x38, KEY_F21		}, /* Hibernate */
+
+	{ 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */
+	{ 0x31, KEY_AGAIN	}, /* Recall */
+	{ 0x1a, KEY_KPPLUS	}, /* Zoom+ */
+	{ 0x19, KEY_KPMINUS	}, /* Zoom- */
+	{ 0x27, KEY_RED		},
+	{ 0x0C, KEY_GREEN	},
+	{ 0x01, KEY_YELLOW	},
+	{ 0x00, KEY_BLUE	},
+};
+
+struct ir_scancode_table ir_mantis = {
+	.scan = mantis_ir_table,
+	.size = ARRAY_SIZE(mantis_ir_table),
+};
+EXPORT_SYMBOL_GPL(ir_mantis);
+
+int mantis_input_init(struct mantis_pci *mantis)
+{
+	struct input_dev *rc;
+	struct ir_input_state rc_state;
+	char name[80], dev[80];
+	int err;
+
+	rc = input_allocate_device();
+	if (!rc) {
+		dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
+		return -ENOMEM;
+	}
+
+	sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+	sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev));
+
+	rc->name = name;
+	rc->phys = dev;
+
+	ir_input_init(rc, &rc_state, IR_TYPE_OTHER);
+
+	rc->id.bustype	= BUS_PCI;
+	rc->id.vendor	= mantis->vendor_id;
+	rc->id.product	= mantis->device_id;
+	rc->id.version	= 1;
+	rc->dev		= mantis->pdev->dev;
+
+	err = ir_input_register(rc, &ir_mantis);
+	if (err) {
+		dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
+		input_free_device(rc);
+		return -ENODEV;
+	}
+
+	mantis->rc = rc;
+
+	return 0;
+}
+
+int mantis_exit(struct mantis_pci *mantis)
+{
+	struct input_dev *rc = mantis->rc;
+
+	ir_input_unregister(rc);
+
+	return 0;
+}
diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c
new file mode 100644
index 0000000..de148de
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ioc.c
@@ -0,0 +1,130 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_ioc.h"
+
+static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length)
+{
+	struct i2c_adapter *adapter = &mantis->adapter;
+	int err;
+	u8 buf = reg;
+
+	struct i2c_msg msg[] = {
+		{ .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 },
+		{ .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
+	};
+
+	err = i2c_transfer(adapter, msg, 2);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+			err, data[0], data[1]);
+
+		return err;
+	}
+
+	return 0;
+}
+int mantis_get_mac(struct mantis_pci *mantis)
+{
+	int err;
+	u8 mac_addr[6] = {0};
+
+	err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6);
+	if (err < 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
+
+		return err;
+	}
+
+	dprintk(MANTIS_ERROR, 0,
+		"    MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+		mac_addr[0],
+		mac_addr[1],
+		mac_addr[2],
+		mac_addr[3],
+		mac_addr[4],
+		mac_addr[5]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_get_mac);
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+	u32 cur;
+
+	dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value);
+	cur = mmread(MANTIS_GPIF_ADDR);
+	if (value)
+		mantis->gpio_status = cur | (1 << bitpos);
+	else
+		mantis->gpio_status = cur & (~(1 << bitpos));
+
+	dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status);
+	mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+	mmwrite(0x00, MANTIS_GPIF_DOUT);
+}
+EXPORT_SYMBOL_GPL(gpio_set_bits);
+
+int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
+{
+	u32 reg;
+
+	reg = mmread(MANTIS_CONTROL);
+	switch (stream_ctl) {
+	case STREAM_TO_HIF:
+		dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
+		reg &= 0xff - MANTIS_BYPASS;
+		mmwrite(reg, MANTIS_CONTROL);
+		reg |= MANTIS_BYPASS;
+		mmwrite(reg, MANTIS_CONTROL);
+		break;
+
+	case STREAM_TO_CAM:
+		dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
+		reg |= MANTIS_BYPASS;
+		mmwrite(reg, MANTIS_CONTROL);
+		reg &= 0xff - MANTIS_BYPASS;
+		mmwrite(reg, MANTIS_CONTROL);
+		break;
+	default:
+		dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
+		return -1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_stream_control);
diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h
new file mode 100644
index 0000000..188fe5a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_ioc.h
@@ -0,0 +1,51 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_IOC_H
+#define __MANTIS_IOC_H
+
+#define GPIF_A00		0x00
+#define GPIF_A01		0x01
+#define GPIF_A02		0x02
+#define GPIF_A03		0x03
+#define GPIF_A04		0x04
+#define GPIF_A05		0x05
+#define GPIF_A06		0x06
+#define GPIF_A07		0x07
+#define GPIF_A08		0x08
+#define GPIF_A09		0x09
+#define GPIF_A10		0x0a
+#define GPIF_A11		0x0b
+
+#define GPIF_A12		0x0c
+#define GPIF_A13		0x0d
+#define GPIF_A14		0x0e
+
+enum mantis_stream_control {
+	STREAM_TO_HIF = 0,
+	STREAM_TO_CAM
+};
+
+extern int mantis_get_mac(struct mantis_pci *mantis);
+extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+
+extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
+
+#endif /* __MANTIS_IOC_H */
diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h
new file mode 100644
index 0000000..2a81477
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_link.h
@@ -0,0 +1,83 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_LINK_H
+#define __MANTIS_LINK_H
+
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include "dvb_ca_en50221.h"
+
+enum mantis_sbuf_status {
+	MANTIS_SBUF_DATA_AVAIL		= 1,
+	MANTIS_SBUF_DATA_EMPTY		= 2,
+	MANTIS_SBUF_DATA_OVFLW		= 3
+};
+
+struct mantis_slot {
+	u32				timeout;
+	u32				slave_cfg;
+	u32				bar;
+};
+
+/* Physical layer */
+enum mantis_slot_state {
+	MODULE_INSERTED			= 3,
+	MODULE_XTRACTED			= 4
+};
+
+struct mantis_ca {
+	struct mantis_slot		slot[4];
+
+	struct work_struct		hif_evm_work;
+
+	u32				hif_event;
+	wait_queue_head_t		hif_opdone_wq;
+	wait_queue_head_t		hif_brrdyw_wq;
+	wait_queue_head_t		hif_data_wq;
+	wait_queue_head_t		hif_write_wq; /* HIF Write op */
+
+	enum mantis_sbuf_status		sbuf_status;
+
+	enum mantis_slot_state		slot_state;
+
+	void				*ca_priv;
+
+	struct dvb_ca_en50221		en50221;
+	struct mutex			ca_lock;
+};
+
+/* CA */
+extern void mantis_event_cam_plugin(struct mantis_ca *ca);
+extern void mantis_event_cam_unplug(struct mantis_ca *ca);
+extern int mantis_pcmcia_init(struct mantis_ca *ca);
+extern void mantis_pcmcia_exit(struct mantis_ca *ca);
+extern int mantis_evmgr_init(struct mantis_ca *ca);
+extern void mantis_evmgr_exit(struct mantis_ca *ca);
+
+/* HIF */
+extern int mantis_hif_init(struct mantis_ca *ca);
+extern void mantis_hif_exit(struct mantis_ca *ca);
+extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data);
+extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
+extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
+
+#endif /* __MANTIS_LINK_H */
diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c
new file mode 100644
index 0000000..6c7534a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pci.c
@@ -0,0 +1,177 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+
+#define DRIVER_NAME		"Mantis Core"
+
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
+{
+	u8 revision, latency;
+	struct mantis_hwconfig *config	= mantis->hwconfig;
+	struct pci_dev *pdev		= mantis->pdev;
+	int err, ret = 0;
+
+	dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+		config->model_name,
+		config->dev_type,
+		mantis->pdev->bus->number,
+		PCI_SLOT(mantis->pdev->devfn),
+		PCI_FUNC(mantis->pdev->devfn));
+
+	err = pci_enable_device(pdev);
+	if (err != 0) {
+		ret = -ENODEV;
+		dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+		goto fail0;
+	}
+
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err != 0) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
+		ret = -ENOMEM;
+		goto fail1;
+	}
+
+	pci_set_master(pdev);
+
+	if (!request_mem_region(pci_resource_start(pdev, 0),
+				pci_resource_len(pdev, 0),
+				DRIVER_NAME)) {
+
+		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
+		ret = -ENODEV;
+		goto fail1;
+	}
+
+	mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+			       pci_resource_len(pdev, 0));
+
+	if (!mantis->mmio) {
+		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
+		ret = -ENODEV;
+		goto fail2;
+	}
+
+	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
+	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
+	mantis->latency = latency;
+	mantis->revision = revision;
+
+	dprintk(MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
+		mantis->revision,
+		mantis->pdev->subsystem_vendor,
+		mantis->pdev->subsystem_device);
+
+	dprintk(MANTIS_ERROR, 0,
+		"irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
+		mantis->pdev->irq,
+		mantis->latency,
+		mantis->mantis_addr,
+		mantis->mmio);
+
+	err = request_irq(pdev->irq,
+			  config->irq_handler,
+			  IRQF_SHARED,
+			  DRIVER_NAME,
+			  mantis);
+
+	if (err != 0) {
+
+		dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
+		ret = -ENODEV;
+		goto fail3;
+	}
+
+	pci_set_drvdata(pdev, mantis);
+	return ret;
+
+	/* Error conditions */
+fail3:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+	if (mantis->mmio)
+		iounmap(mantis->mmio);
+
+fail2:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+
+fail1:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
+	pci_disable_device(pdev);
+
+fail0:
+	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+	pci_set_drvdata(pdev, NULL);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
+
+void mantis_pci_exit(struct mantis_pci *mantis)
+{
+	struct pci_dev *pdev = mantis->pdev;
+
+	dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
+	free_irq(pdev->irq, mantis);
+	if (mantis->mmio) {
+		iounmap(mantis->mmio);
+		release_mem_region(pci_resource_start(pdev, 0),
+				   pci_resource_len(pdev, 0));
+	}
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
+
+MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h
new file mode 100644
index 0000000..65f0045
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pci.h
@@ -0,0 +1,27 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_PCI_H
+#define __MANTIS_PCI_H
+
+extern int mantis_pci_init(struct mantis_pci *mantis);
+extern void mantis_pci_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_PCI_H */
diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c
new file mode 100644
index 0000000..5cb545b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_pcmcia.c
@@ -0,0 +1,120 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_link.h" /* temporary due to physical layer stuff */
+#include "mantis_reg.h"
+
+/*
+ * If Slot state is already PLUG_IN event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_plugin(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	u32 gpif_irqcfg;
+
+	if (ca->slot_state == MODULE_XTRACTED) {
+		dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
+		udelay(50);
+		mmwrite(0xda000000, MANTIS_CARD_RESET);
+		gpif_irqcfg  = mmread(MANTIS_GPIF_IRQCFG);
+		gpif_irqcfg |= MANTIS_MASK_PLUGOUT;
+		gpif_irqcfg &= ~MANTIS_MASK_PLUGIN;
+		mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+		udelay(500);
+		ca->slot_state = MODULE_INSERTED;
+	}
+	udelay(100);
+}
+
+/*
+ * If Slot state is already UN_PLUG event and we are called
+ * again, definitely it is jitter alone
+ */
+void mantis_event_cam_unplug(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	u32 gpif_irqcfg;
+
+	if (ca->slot_state == MODULE_INSERTED) {
+		dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
+		udelay(50);
+		mmwrite(0x00da0000, MANTIS_CARD_RESET);
+		gpif_irqcfg  = mmread(MANTIS_GPIF_IRQCFG);
+		gpif_irqcfg |= MANTIS_MASK_PLUGIN;
+		gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT;
+		mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG);
+		udelay(500);
+		ca->slot_state = MODULE_XTRACTED;
+	}
+	udelay(100);
+}
+
+int mantis_pcmcia_init(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	u32 gpif_stat, card_stat;
+
+	mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+	gpif_stat = mmread(MANTIS_GPIF_STATUS);
+	card_stat = mmread(MANTIS_GPIF_IRQCFG);
+
+	if (gpif_stat & MANTIS_GPIF_DETSTAT) {
+		dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
+		mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
+		ca->slot_state = MODULE_INSERTED;
+		dvb_ca_en50221_camchange_irq(&ca->en50221,
+					     0,
+					     DVB_CA_EN50221_CAMCHANGE_INSERTED);
+	} else {
+		dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
+		mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
+		ca->slot_state = MODULE_XTRACTED;
+		dvb_ca_en50221_camchange_irq(&ca->en50221,
+					     0,
+					     DVB_CA_EN50221_CAMCHANGE_REMOVED);
+	}
+
+	return 0;
+}
+
+void mantis_pcmcia_exit(struct mantis_ca *ca)
+{
+	struct mantis_pci *mantis = ca->ca_priv;
+
+	mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS);
+	mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK);
+}
diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h
new file mode 100644
index 0000000..7761f9d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_reg.h
@@ -0,0 +1,197 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_REG_H
+#define __MANTIS_REG_H
+
+/* Interrupts */
+#define MANTIS_INT_STAT			0x00
+#define MANTIS_INT_MASK			0x04
+
+#define MANTIS_INT_RISCSTAT		(0x0f << 28)
+#define MANTIS_INT_RISCEN		(0x01 << 27)
+#define MANTIS_INT_I2CRACK		(0x01 << 26)
+
+/* #define MANTIS_INT_GPIF			(0xff << 12) */
+
+#define MANTIS_INT_PCMCIA7		(0x01 << 19)
+#define MANTIS_INT_PCMCIA6		(0x01 << 18)
+#define MANTIS_INT_PCMCIA5		(0x01 << 17)
+#define MANTIS_INT_PCMCIA4		(0x01 << 16)
+#define MANTIS_INT_PCMCIA3		(0x01 << 15)
+#define MANTIS_INT_PCMCIA2		(0x01 << 14)
+#define MANTIS_INT_PCMCIA1		(0x01 << 13)
+#define MANTIS_INT_PCMCIA0		(0x01 << 12)
+#define MANTIS_INT_IRQ1			(0x01 << 11)
+#define MANTIS_INT_IRQ0			(0x01 << 10)
+#define MANTIS_INT_OCERR		(0x01 <<  8)
+#define MANTIS_INT_PABORT		(0x01 <<  7)
+#define MANTIS_INT_RIPERR		(0x01 <<  6)
+#define MANTIS_INT_PPERR		(0x01 <<  5)
+#define MANTIS_INT_FTRGT		(0x01 <<  3)
+#define MANTIS_INT_RISCI		(0x01 <<  1)
+#define MANTIS_INT_I2CDONE		(0x01 <<  0)
+
+/* DMA */
+#define MANTIS_DMA_CTL			0x08
+#define MANTIS_GPIF_RD			(0xff << 24)
+#define MANTIS_GPIF_WR			(0xff << 16)
+#define MANTIS_CPU_DO			(0x01 << 10)
+#define MANTIS_DRV_DO			(0x01 <<  9)
+#define	MANTIS_I2C_RD			(0x01 <<  7)
+#define MANTIS_I2C_WR			(0x01 <<  6)
+#define MANTIS_DCAP_MODE		(0x01 <<  5)
+#define MANTIS_FIFO_TP_4		(0x00 <<  3)
+#define MANTIS_FIFO_TP_8		(0x01 <<  3)
+#define MANTIS_FIFO_TP_16		(0x02 <<  3)
+#define MANTIS_FIFO_EN			(0x01 <<  2)
+#define MANTIS_DCAP_EN			(0x01 <<  1)
+#define MANTIS_RISC_EN			(0x01 <<  0)
+
+/* DEBUG */
+#define MANTIS_DEBUGREG			0x0c
+#define MANTIS_DATINV			(0x0e <<  7)
+#define MANTIS_TOP_DEBUGSEL		(0x07 <<  4)
+#define MANTIS_PCMCIA_DEBUGSEL		(0x0f <<  0)
+
+#define MANTIS_RISC_START		0x10
+#define MANTIS_RISC_PC			0x14
+
+/* I2C */
+#define MANTIS_I2CDATA_CTL		0x18
+#define MANTIS_I2C_RATE_1		(0x00 <<  6)
+#define MANTIS_I2C_RATE_2		(0x01 <<  6)
+#define MANTIS_I2C_RATE_3		(0x02 <<  6)
+#define MANTIS_I2C_RATE_4		(0x03 <<  6)
+#define MANTIS_I2C_STOP			(0x01 <<  5)
+#define MANTIS_I2C_PGMODE		(0x01 <<  3)
+
+/* DATA */
+#define MANTIS_CMD_DATA_R1		0x20
+#define MANTIS_CMD_DATA_3		(0xff << 24)
+#define MANTIS_CMD_DATA_2		(0xff << 16)
+#define MANTIS_CMD_DATA_1		(0xff <<  8)
+#define MANTIS_CMD_DATA_0		(0xff <<  0)
+
+#define MANTIS_CMD_DATA_R2		0x24
+#define MANTIS_CMD_DATA_7		(0xff << 24)
+#define MANTIS_CMD_DATA_6		(0xff << 16)
+#define MANTIS_CMD_DATA_5		(0xff <<  8)
+#define MANTIS_CMD_DATA_4		(0xff <<  0)
+
+#define MANTIS_CONTROL			0x28
+#define MANTIS_DET			(0x01 <<  7)
+#define MANTIS_DAT_CF_EN		(0x01 <<  6)
+#define MANTIS_ACS			(0x03 <<  4)
+#define MANTIS_VCCEN			(0x01 <<  3)
+#define MANTIS_BYPASS			(0x01 <<  2)
+#define MANTIS_MRST			(0x01 <<  1)
+#define MANTIS_CRST_INT			(0x01 <<  0)
+
+#define MANTIS_GPIF_CFGSLA		0x84
+#define MANTIS_GPIF_WAITSMPL		(0x07 << 28)
+#define MANTIS_GPIF_BYTEADDRSUB		(0x01 << 25)
+#define MANTIS_GPIF_WAITPOL		(0x01 << 24)
+#define MANTIS_GPIF_NCDELAY		(0x07 << 20)
+#define MANTIS_GPIF_RW2CSDELAY		(0x07 << 16)
+#define MANTIS_GPIF_SLFTIMEDMODE	(0x01 << 15)
+#define MANTIS_GPIF_SLFTIMEDDELY	(0x7f <<  8)
+#define MANTIS_GPIF_DEVTYPE		(0x07 <<  4)
+#define MANTIS_GPIF_BIGENDIAN		(0x01 <<  3)
+#define MANTIS_GPIF_FETCHCMD		(0x03 <<  1)
+#define MANTIS_GPIF_HWORDDEV		(0x01 <<  0)
+
+#define MANTIS_GPIF_WSTOPER		0x90
+#define MANTIS_GPIF_WSTOPERWREN3	(0x01 << 31)
+#define MANTIS_GPIF_PARBOOTN		(0x01 << 29)
+#define MANTIS_GPIF_WSTOPERSLID3	(0x1f << 24)
+#define MANTIS_GPIF_WSTOPERWREN2	(0x01 << 23)
+#define MANTIS_GPIF_WSTOPERSLID2	(0x1f << 16)
+#define MANTIS_GPIF_WSTOPERWREN1	(0x01 << 15)
+#define MANTIS_GPIF_WSTOPERSLID1	(0x1f <<  8)
+#define MANTIS_GPIF_WSTOPERWREN0	(0x01 <<  7)
+#define MANTIS_GPIF_WSTOPERSLID0	(0x1f <<  0)
+
+#define MANTIS_GPIF_CS2RW		0x94
+#define MANTIS_GPIF_CS2RWWREN3		(0x01 << 31)
+#define MANTIS_GPIF_CS2RWDELY3		(0x3f << 24)
+#define MANTIS_GPIF_CS2RWWREN2		(0x01 << 23)
+#define MANTIS_GPIF_CS2RWDELY2		(0x3f << 16)
+#define MANTIS_GPIF_CS2RWWREN1		(0x01 << 15)
+#define MANTIS_GPIF_CS2RWDELY1		(0x3f <<  8)
+#define MANTIS_GPIF_CS2RWWREN0		(0x01 <<  7)
+#define MANTIS_GPIF_CS2RWDELY0		(0x3f <<  0)
+
+#define MANTIS_GPIF_IRQCFG		0x98
+#define MANTIS_GPIF_IRQPOL		(0x01 <<  8)
+#define MANTIS_MASK_WRACK		(0x01 <<  7)
+#define MANTIS_MASK_BRRDY		(0x01 <<  6)
+#define MANTIS_MASK_OVFLW		(0x01 <<  5)
+#define MANTIS_MASK_OTHERR		(0x01 <<  4)
+#define MANTIS_MASK_WSTO		(0x01 <<  3)
+#define MANTIS_MASK_EXTIRQ		(0x01 <<  2)
+#define MANTIS_MASK_PLUGIN		(0x01 <<  1)
+#define MANTIS_MASK_PLUGOUT		(0x01 <<  0)
+
+#define MANTIS_GPIF_STATUS		0x9c
+#define MANTIS_SBUF_KILLOP		(0x01 << 15)
+#define MANTIS_SBUF_OPDONE		(0x01 << 14)
+#define MANTIS_SBUF_EMPTY		(0x01 << 13)
+#define MANTIS_GPIF_DETSTAT		(0x01 <<  9)
+#define MANTIS_GPIF_INTSTAT		(0x01 <<  8)
+#define MANTIS_GPIF_WRACK		(0x01 <<  7)
+#define MANTIS_GPIF_BRRDY		(0x01 <<  6)
+#define MANTIS_SBUF_OVFLW		(0x01 <<  5)
+#define MANTIS_GPIF_OTHERR		(0x01 <<  4)
+#define MANTIS_SBUF_WSTO		(0x01 <<  3)
+#define MANTIS_GPIF_EXTIRQ		(0x01 <<  2)
+#define MANTIS_CARD_PLUGIN		(0x01 <<  1)
+#define MANTIS_CARD_PLUGOUT		(0x01 <<  0)
+
+#define MANTIS_GPIF_BRADDR		0xa0
+#define MANTIS_GPIF_PCMCIAREG		(0x01 		<< 27)
+#define MANTIS_GPIF_PCMCIAIOM		(0x01 		<< 26)
+#define MANTIS_GPIF_BR_ADDR		(0xfffffff	<<  0)
+
+#define MANTIS_GPIF_BRBYTES		0xa4
+#define MANTIS_GPIF_BRCNT		(0xfff 		<<  0)
+
+#define MANTIS_PCMCIA_RESET		0xa8
+#define MANTIS_PCMCIA_RSTVAL		(0xff << 0)
+
+#define MANTIS_CARD_RESET		0xac
+
+#define MANTIS_GPIF_ADDR		0xb0
+#define MANTIS_GPIF_HIFRDWRN		(0x01		<< 31)
+#define MANTIS_GPIF_PCMCIAREG		(0x01		<< 27)
+#define MANTIS_GPIF_PCMCIAIOM		(0x01		<< 26)
+#define MANTIS_GPIF_HIFADDR		(0xfffffff	<<  0)
+
+#define MANTIS_GPIF_DOUT		0xb4
+#define MANTIS_GPIF_HIFDOUT		(0xfffffff	<<  0)
+
+#define MANTIS_GPIF_DIN			0xb8
+#define MANTIS_GPIF_HIFDIN		(0xfffffff	<<  0)
+
+#define MANTIS_GPIF_SPARE		0xbc
+#define MANTIS_GPIF_LOGICRD		(0xffff		<< 16)
+#define MANTIS_GPIF_LOGICRW		(0xffff		<<  0)
+
+#endif /* __MANTIS_REG_H */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
new file mode 100644
index 0000000..7d2f239
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -0,0 +1,186 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
+
+struct mantis_uart_params {
+	enum mantis_baud	baud_rate;
+	enum mantis_parity	parity;
+};
+
+static struct {
+	char string[7];
+} rates[5] = {
+	{ "9600" },
+	{ "19200" },
+	{ "38400" },
+	{ "57600" },
+	{ "115200" }
+};
+
+static struct {
+	char string[5];
+} parity[3] = {
+	{ "NONE" },
+	{ "ODD" },
+	{ "EVEN" }
+};
+
+#define UART_MAX_BUF			16
+
+int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+	u32 stat = 0, i;
+
+	/* get data */
+	for (i = 0; i < (config->bytes + 1); i++) {
+
+		stat = mmread(MANTIS_UART_STAT);
+
+		if (stat & MANTIS_UART_RXFIFO_FULL) {
+			dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
+		}
+		data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
+
+		dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
+
+		if (data[i] & (1 << 7)) {
+			dprintk(MANTIS_ERROR, 1, "UART framing error");
+			return -EINVAL;
+		}
+		if (data[i] & (1 << 6)) {
+			dprintk(MANTIS_ERROR, 1, "UART parity error");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static void mantis_uart_work(struct work_struct *work)
+{
+	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
+	struct mantis_hwconfig *config = mantis->hwconfig;
+	u8 buf[16];
+	int i;
+
+	mantis_uart_read(mantis, buf);
+
+	for (i = 0; i < (config->bytes + 1); i++)
+		dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
+
+	dprintk(MANTIS_DEBUG, 0, "\n");
+}
+
+static int mantis_uart_setup(struct mantis_pci *mantis,
+			     struct mantis_uart_params *params)
+{
+	u32 reg;
+
+	mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
+
+	reg = mmread(MANTIS_UART_BAUD);
+
+	switch (params->baud_rate) {
+	case MANTIS_BAUD_9600:
+		reg |= 0xd8;
+		break;
+	case MANTIS_BAUD_19200:
+		reg |= 0x6c;
+		break;
+	case MANTIS_BAUD_38400:
+		reg |= 0x36;
+		break;
+	case MANTIS_BAUD_57600:
+		reg |= 0x23;
+		break;
+	case MANTIS_BAUD_115200:
+		reg |= 0x11;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mmwrite(reg, MANTIS_UART_BAUD);
+
+	return 0;
+}
+
+int mantis_uart_init(struct mantis_pci *mantis)
+{
+	struct mantis_hwconfig *config = mantis->hwconfig;
+	struct mantis_uart_params params;
+
+	/* default parity: */
+	params.baud_rate = config->baud_rate;
+	params.parity = config->parity;
+	dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
+		rates[params.baud_rate].string,
+		parity[params.parity].string);
+
+	init_waitqueue_head(&mantis->uart_wq);
+	spin_lock_init(&mantis->uart_lock);
+
+	INIT_WORK(&mantis->uart_work, mantis_uart_work);
+
+	/* disable interrupt */
+	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+
+	mantis_uart_setup(mantis, &params);
+
+	/* default 1 byte */
+	mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
+
+	/* flush buffer */
+	mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
+
+	/* enable interrupt */
+	mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
+	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
+
+	schedule_work(&mantis->uart_work);
+	dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_uart_init);
+
+void mantis_uart_exit(struct mantis_pci *mantis)
+{
+	/* disable interrupt */
+	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+}
+EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h
new file mode 100644
index 0000000..ffb62a0
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_uart.h
@@ -0,0 +1,58 @@
+/*
+	Mantis PCI bridge driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_UART_H
+#define __MANTIS_UART_H
+
+#define MANTIS_UART_CTL			0xe0
+#define MANTIS_UART_RXINT		(1 << 4)
+#define MANTIS_UART_RXFLUSH		(1 << 2)
+
+#define MANTIS_UART_RXD			0xe8
+#define MANTIS_UART_BAUD		0xec
+
+#define MANTIS_UART_STAT		0xf0
+#define MANTIS_UART_RXFIFO_DATA		(1 << 7)
+#define MANTIS_UART_RXFIFO_EMPTY	(1 << 6)
+#define MANTIS_UART_RXFIFO_FULL		(1 << 3)
+#define MANTIS_UART_FRAME_ERR		(1 << 2)
+#define MANTIS_UART_PARITY_ERR		(1 << 1)
+#define MANTIS_UART_RXTHRESH_INT	(1 << 0)
+
+enum mantis_baud {
+	MANTIS_BAUD_9600	= 0,
+	MANTIS_BAUD_19200,
+	MANTIS_BAUD_38400,
+	MANTIS_BAUD_57600,
+	MANTIS_BAUD_115200
+};
+
+enum mantis_parity {
+	MANTIS_PARITY_NONE	= 0,
+	MANTIS_PARITY_EVEN,
+	MANTIS_PARITY_ODD,
+};
+
+struct mantis_pci;
+
+extern int mantis_uart_init(struct mantis_pci *mantis);
+extern void mantis_uart_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_UART_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c
new file mode 100644
index 0000000..4a723bd
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1033.c
@@ -0,0 +1,212 @@
+/*
+	Mantis VP-1033 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "stv0299.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1033.h"
+#include "mantis_reg.h"
+
+u8 lgtdqcs001f_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x00,
+	0x03, 0x00,
+	0x04, 0x2a,
+	0x05, 0x85,
+	0x06, 0x02,
+	0x07, 0x00,
+	0x08, 0x00,
+	0x0c, 0x01,
+	0x0d, 0x81,
+	0x0e, 0x44,
+	0x0f, 0x94,
+	0x10, 0x3c,
+	0x11, 0x84,
+	0x12, 0xb9,
+	0x13, 0xb5,
+	0x14, 0x4f,
+	0x15, 0xc9,
+	0x16, 0x80,
+	0x17, 0x36,
+	0x18, 0xfb,
+	0x19, 0xcf,
+	0x1a, 0xbc,
+	0x1c, 0x2b,
+	0x1d, 0x27,
+	0x1e, 0x00,
+	0x1f, 0x0b,
+	0x20, 0xa1,
+	0x21, 0x60,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,
+	0x29, 0x28,
+	0x2a, 0x14,
+	0x2b, 0x0f,
+	0x2c, 0x09,
+	0x2d, 0x05,
+	0x31, 0x1f,
+	0x32, 0x19,
+	0x33, 0xfc,
+	0x34, 0x13,
+	0xff, 0xff,
+};
+
+#define MANTIS_MODEL_NAME	"VP-1033"
+#define MANTIS_DEV_TYPE		"DVB-S/DSS"
+
+int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
+			  struct dvb_frontend_parameters *params)
+{
+	struct mantis_pci *mantis	= fe->dvb->priv;
+	struct i2c_adapter *adapter	= &mantis->adapter;
+
+	u8 buf[4];
+	u32 div;
+
+
+	struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)};
+
+	div = params->frequency / 250;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] =  div & 0xff;
+	buf[2] =  0x83;
+	buf[3] =  0xc0;
+
+	if (params->frequency < 1531000)
+		buf[3] |= 0x04;
+	else
+		buf[3] &= ~0x04;
+	if (i2c_transfer(adapter, &msg, 1) < 0) {
+		dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
+		return -EIO;
+	}
+	msleep_interruptible(100);
+
+	return 0;
+}
+
+int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe,
+				u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) {
+		aclk = 0xb7;
+		bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7;
+		bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7;
+		bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7;
+		bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6;
+		bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4;
+		bclk = 0x51;
+	}
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21,  ratio & 0xf0);
+
+	return 0;
+}
+
+struct stv0299_config lgtdqcs001f_config = {
+	.demod_address		= 0x68,
+	.inittab		= lgtdqcs001f_inittab,
+	.mclk			= 88000000UL,
+	.invert			= 0,
+	.skip_reinit		= 0,
+	.volt13_op0_op1		= STV0299_VOLT13_OP0,
+	.min_delay_ms		= 100,
+	.set_symbol_rate	= lgtdqcs001f_set_symbol_rate,
+};
+
+static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+
+	int err = 0;
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
+		fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+
+		if (fe) {
+			fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
+			dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
+				lgtdqcs001f_config.demod_address);
+
+			dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+		} else {
+			return -1;
+		}
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+	mantis->fe = fe;
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp1033_config = {
+	.model_name		= MANTIS_MODEL_NAME,
+	.dev_type		= MANTIS_DEV_TYPE,
+	.ts_size		= MANTIS_TS_204,
+
+	.baud_rate		= MANTIS_BAUD_9600,
+	.parity			= MANTIS_PARITY_NONE,
+	.bytes			= 0,
+
+	.frontend_init		= vp1033_frontend_init,
+	.power			= GPIF_A12,
+	.reset			= GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h
new file mode 100644
index 0000000..7daaa1b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1033.h
@@ -0,0 +1,30 @@
+/*
+	Mantis VP-1033 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1033_H
+#define __MANTIS_VP1033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1033_DVB_S	0x0016
+
+extern struct mantis_hwconfig vp1033_config;
+
+#endif /* __MANTIS_VP1033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c
new file mode 100644
index 0000000..8e6ae55
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1034.c
@@ -0,0 +1,119 @@
+/*
+	Mantis VP-1034 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mb86a16.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1034.h"
+#include "mantis_reg.h"
+
+struct mb86a16_config vp1034_mb86a16_config = {
+	.demod_address	= 0x08,
+	.set_voltage	= vp1034_set_voltage,
+};
+
+#define MANTIS_MODEL_NAME	"VP-1034"
+#define MANTIS_DEV_TYPE		"DVB-S/DSS"
+
+int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	struct mantis_pci *mantis = fe->dvb->priv;
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
+		gpio_set_bits(mantis, 13, 1);
+		gpio_set_bits(mantis, 14, 0);
+		break;
+	case SEC_VOLTAGE_18:
+		dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
+		gpio_set_bits(mantis, 13, 1);
+		gpio_set_bits(mantis, 14, 1);
+		break;
+	case SEC_VOLTAGE_OFF:
+		dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+		break;
+	default:
+		dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
+		return -EINVAL;
+	}
+	mmwrite(0x00, MANTIS_GPIF_DOUT);
+
+	return 0;
+}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+
+	int err = 0;
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+		fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+		if (fe) {
+			dprintk(MANTIS_ERROR, 1,
+			"found MB86A16 DVB-S/DSS frontend @0x%02x",
+			vp1034_mb86a16_config.demod_address);
+
+		} else {
+			return -1;
+		}
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+	mantis->fe = fe;
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_204,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp1034_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h
new file mode 100644
index 0000000..323f38e
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1034.h
@@ -0,0 +1,33 @@
+/*
+	Mantis VP-1034 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1034_H
+#define __MANTIS_VP1034_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+
+
+#define MANTIS_VP_1034_DVB_S	0x0014
+
+extern struct mantis_hwconfig vp1034_config;
+extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
+
+#endif /* __MANTIS_VP1034_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
new file mode 100644
index 0000000..515346d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -0,0 +1,358 @@
+/*
+	Mantis VP-1041 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp1041.h"
+#include "stb0899_reg.h"
+#include "stb0899_drv.h"
+#include "stb0899_cfg.h"
+#include "stb6100_cfg.h"
+#include "stb6100.h"
+#include "lnbp21.h"
+
+#define MANTIS_MODEL_NAME	"VP-1041"
+#define MANTIS_DEV_TYPE		"DSS/DVB-S/DVB-S2"
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
+
+	/* 0x0000000b, *//* SYSREG */
+	{ STB0899_DEV_ID		, 0x30 },
+	{ STB0899_DISCNTRL1		, 0x32 },
+	{ STB0899_DISCNTRL2     	, 0x80 },
+	{ STB0899_DISRX_ST0     	, 0x04 },
+	{ STB0899_DISRX_ST1     	, 0x00 },
+	{ STB0899_DISPARITY     	, 0x00 },
+	{ STB0899_DISFIFO       	, 0x00 },
+	{ STB0899_DISSTATUS		, 0x20 },
+	{ STB0899_DISF22        	, 0x99 },
+	{ STB0899_DISF22RX      	, 0xa8 },
+	/* SYSREG ? */
+	{ STB0899_ACRPRESC      	, 0x11 },
+	{ STB0899_ACRDIV1       	, 0x0a },
+	{ STB0899_ACRDIV2       	, 0x05 },
+	{ STB0899_DACR1         	, 0x00 },
+	{ STB0899_DACR2         	, 0x00 },
+	{ STB0899_OUTCFG        	, 0x00 },
+	{ STB0899_MODECFG       	, 0x00 },
+	{ STB0899_IRQSTATUS_3		, 0xfe },
+	{ STB0899_IRQSTATUS_2		, 0x03 },
+	{ STB0899_IRQSTATUS_1		, 0x7c },
+	{ STB0899_IRQSTATUS_0		, 0xf4 },
+	{ STB0899_IRQMSK_3      	, 0xf3 },
+	{ STB0899_IRQMSK_2      	, 0xfc },
+	{ STB0899_IRQMSK_1      	, 0xff },
+	{ STB0899_IRQMSK_0		, 0xff },
+	{ STB0899_IRQCFG		, 0x00 },
+	{ STB0899_I2CCFG        	, 0x88 },
+	{ STB0899_I2CRPT        	, 0x58 },
+	{ STB0899_IOPVALUE5		, 0x00 },
+	{ STB0899_IOPVALUE4		, 0x33 },
+	{ STB0899_IOPVALUE3		, 0x6d },
+	{ STB0899_IOPVALUE2		, 0x90 },
+	{ STB0899_IOPVALUE1		, 0x60 },
+	{ STB0899_IOPVALUE0		, 0x00 },
+	{ STB0899_GPIO00CFG     	, 0x82 },
+	{ STB0899_GPIO01CFG     	, 0x82 },
+	{ STB0899_GPIO02CFG     	, 0x82 },
+	{ STB0899_GPIO03CFG     	, 0x82 },
+	{ STB0899_GPIO04CFG     	, 0x82 },
+	{ STB0899_GPIO05CFG     	, 0x82 },
+	{ STB0899_GPIO06CFG     	, 0x82 },
+	{ STB0899_GPIO07CFG     	, 0x82 },
+	{ STB0899_GPIO08CFG     	, 0x82 },
+	{ STB0899_GPIO09CFG     	, 0x82 },
+	{ STB0899_GPIO10CFG     	, 0x82 },
+	{ STB0899_GPIO11CFG     	, 0x82 },
+	{ STB0899_GPIO12CFG     	, 0x82 },
+	{ STB0899_GPIO13CFG     	, 0x82 },
+	{ STB0899_GPIO14CFG     	, 0x82 },
+	{ STB0899_GPIO15CFG     	, 0x82 },
+	{ STB0899_GPIO16CFG     	, 0x82 },
+	{ STB0899_GPIO17CFG     	, 0x82 },
+	{ STB0899_GPIO18CFG     	, 0x82 },
+	{ STB0899_GPIO19CFG     	, 0x82 },
+	{ STB0899_GPIO20CFG     	, 0x82 },
+	{ STB0899_SDATCFG       	, 0xb8 },
+	{ STB0899_SCLTCFG       	, 0xba },
+	{ STB0899_AGCRFCFG      	, 0x1c }, /* 0x11 */
+	{ STB0899_GPIO22        	, 0x82 }, /* AGCBB2CFG */
+	{ STB0899_GPIO21        	, 0x91 }, /* AGCBB1CFG */
+	{ STB0899_DIRCLKCFG     	, 0x82 },
+	{ STB0899_CLKOUT27CFG   	, 0x7e },
+	{ STB0899_STDBYCFG      	, 0x82 },
+	{ STB0899_CS0CFG        	, 0x82 },
+	{ STB0899_CS1CFG        	, 0x82 },
+	{ STB0899_DISEQCOCFG    	, 0x20 },
+	{ STB0899_GPIO32CFG		, 0x82 },
+	{ STB0899_GPIO33CFG		, 0x82 },
+	{ STB0899_GPIO34CFG		, 0x82 },
+	{ STB0899_GPIO35CFG		, 0x82 },
+	{ STB0899_GPIO36CFG		, 0x82 },
+	{ STB0899_GPIO37CFG		, 0x82 },
+	{ STB0899_GPIO38CFG		, 0x82 },
+	{ STB0899_GPIO39CFG		, 0x82 },
+	{ STB0899_NCOARSE       	, 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+	{ STB0899_SYNTCTRL      	, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+	{ STB0899_FILTCTRL      	, 0x00 },
+	{ STB0899_SYSCTRL       	, 0x01 },
+	{ STB0899_STOPCLK1      	, 0x20 },
+	{ STB0899_STOPCLK2      	, 0x00 },
+	{ STB0899_INTBUFSTATUS		, 0x00 },
+	{ STB0899_INTBUFCTRL    	, 0x0a },
+	{ 0xffff			, 0xff },
+};
+
+static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = {
+	{ STB0899_DEMOD         	, 0x00 },
+	{ STB0899_RCOMPC        	, 0xc9 },
+	{ STB0899_AGC1CN        	, 0x01 },
+	{ STB0899_AGC1REF       	, 0x10 },
+	{ STB0899_RTC	        	, 0x23 },
+	{ STB0899_TMGCFG        	, 0x4e },
+	{ STB0899_AGC2REF       	, 0x34 },
+	{ STB0899_TLSR          	, 0x84 },
+	{ STB0899_CFD           	, 0xf7 },
+	{ STB0899_ACLC	        	, 0x87 },
+	{ STB0899_BCLC          	, 0x94 },
+	{ STB0899_EQON          	, 0x41 },
+	{ STB0899_LDT           	, 0xf1 },
+	{ STB0899_LDT2          	, 0xe3 },
+	{ STB0899_EQUALREF      	, 0xb4 },
+	{ STB0899_TMGRAMP       	, 0x10 },
+	{ STB0899_TMGTHD        	, 0x30 },
+	{ STB0899_IDCCOMP		, 0xfd },
+	{ STB0899_QDCCOMP		, 0xff },
+	{ STB0899_POWERI		, 0x0c },
+	{ STB0899_POWERQ		, 0x0f },
+	{ STB0899_RCOMP			, 0x6c },
+	{ STB0899_AGCIQIN		, 0x80 },
+	{ STB0899_AGC2I1		, 0x06 },
+	{ STB0899_AGC2I2		, 0x00 },
+	{ STB0899_TLIR			, 0x30 },
+	{ STB0899_RTF			, 0x7f },
+	{ STB0899_DSTATUS		, 0x00 },
+	{ STB0899_LDI			, 0xbc },
+	{ STB0899_CFRM			, 0xea },
+	{ STB0899_CFRL			, 0x31 },
+	{ STB0899_NIRM			, 0x2b },
+	{ STB0899_NIRL			, 0x80 },
+	{ STB0899_ISYMB			, 0x1d },
+	{ STB0899_QSYMB			, 0xa6 },
+	{ STB0899_SFRH          	, 0x2f },
+	{ STB0899_SFRM          	, 0x68 },
+	{ STB0899_SFRL          	, 0x40 },
+	{ STB0899_SFRUPH        	, 0x2f },
+	{ STB0899_SFRUPM        	, 0x68 },
+	{ STB0899_SFRUPL        	, 0x40 },
+	{ STB0899_EQUAI1		, 0x02 },
+	{ STB0899_EQUAQ1		, 0xff },
+	{ STB0899_EQUAI2		, 0x04 },
+	{ STB0899_EQUAQ2		, 0x05 },
+	{ STB0899_EQUAI3		, 0x02 },
+	{ STB0899_EQUAQ3		, 0xfd },
+	{ STB0899_EQUAI4		, 0x03 },
+	{ STB0899_EQUAQ4		, 0x07 },
+	{ STB0899_EQUAI5		, 0x08 },
+	{ STB0899_EQUAQ5		, 0xf5 },
+	{ STB0899_DSTATUS2		, 0x00 },
+	{ STB0899_VSTATUS       	, 0x00 },
+	{ STB0899_VERROR		, 0x86 },
+	{ STB0899_IQSWAP		, 0x2a },
+	{ STB0899_ECNT1M		, 0x00 },
+	{ STB0899_ECNT1L		, 0x00 },
+	{ STB0899_ECNT2M		, 0x00 },
+	{ STB0899_ECNT2L		, 0x00 },
+	{ STB0899_ECNT3M		, 0x0a },
+	{ STB0899_ECNT3L		, 0xad },
+	{ STB0899_FECAUTO1      	, 0x06 },
+	{ STB0899_FECM	        	, 0x01 },
+	{ STB0899_VTH12         	, 0xb0 },
+	{ STB0899_VTH23         	, 0x7a },
+	{ STB0899_VTH34	        	, 0x58 },
+	{ STB0899_VTH56         	, 0x38 },
+	{ STB0899_VTH67         	, 0x34 },
+	{ STB0899_VTH78         	, 0x24 },
+	{ STB0899_PRVIT         	, 0xff },
+	{ STB0899_VITSYNC       	, 0x19 },
+	{ STB0899_RSULC         	, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+	{ STB0899_TSULC         	, 0x42 },
+	{ STB0899_RSLLC         	, 0x41 },
+	{ STB0899_TSLPL	        	, 0x12 },
+	{ STB0899_TSCFGH        	, 0x0c },
+	{ STB0899_TSCFGM        	, 0x00 },
+	{ STB0899_TSCFGL        	, 0x00 },
+	{ STB0899_TSOUT			, 0x69 }, /* 0x0d for CAM */
+	{ STB0899_RSSYNCDEL     	, 0x00 },
+	{ STB0899_TSINHDELH     	, 0x02 },
+	{ STB0899_TSINHDELM		, 0x00 },
+	{ STB0899_TSINHDELL		, 0x00 },
+	{ STB0899_TSLLSTKM		, 0x1b },
+	{ STB0899_TSLLSTKL		, 0xb3 },
+	{ STB0899_TSULSTKM		, 0x00 },
+	{ STB0899_TSULSTKL		, 0x00 },
+	{ STB0899_PCKLENUL		, 0xbc },
+	{ STB0899_PCKLENLL		, 0xcc },
+	{ STB0899_RSPCKLEN		, 0xbd },
+	{ STB0899_TSSTATUS		, 0x90 },
+	{ STB0899_ERRCTRL1      	, 0xb6 },
+	{ STB0899_ERRCTRL2      	, 0x95 },
+	{ STB0899_ERRCTRL3      	, 0x8d },
+	{ STB0899_DMONMSK1		, 0x27 },
+	{ STB0899_DMONMSK0		, 0x03 },
+	{ STB0899_DEMAPVIT      	, 0x5c },
+	{ STB0899_PLPARM		, 0x19 },
+	{ STB0899_PDELCTRL      	, 0x48 },
+	{ STB0899_PDELCTRL2     	, 0x00 },
+	{ STB0899_BBHCTRL1      	, 0x00 },
+	{ STB0899_BBHCTRL2      	, 0x00 },
+	{ STB0899_HYSTTHRESH    	, 0x77 },
+	{ STB0899_MATCSTM		, 0x00 },
+	{ STB0899_MATCSTL		, 0x00 },
+	{ STB0899_UPLCSTM		, 0x00 },
+	{ STB0899_UPLCSTL		, 0x00 },
+	{ STB0899_DFLCSTM		, 0x00 },
+	{ STB0899_DFLCSTL		, 0x00 },
+	{ STB0899_SYNCCST		, 0x00 },
+	{ STB0899_SYNCDCSTM		, 0x00 },
+	{ STB0899_SYNCDCSTL		, 0x00 },
+	{ STB0899_ISI_ENTRY		, 0x00 },
+	{ STB0899_ISI_BIT_EN		, 0x00 },
+	{ STB0899_MATSTRM		, 0xf0 },
+	{ STB0899_MATSTRL		, 0x02 },
+	{ STB0899_UPLSTRM		, 0x45 },
+	{ STB0899_UPLSTRL		, 0x60 },
+	{ STB0899_DFLSTRM		, 0xe3 },
+	{ STB0899_DFLSTRL		, 0x00 },
+	{ STB0899_SYNCSTR		, 0x47 },
+	{ STB0899_SYNCDSTRM		, 0x05 },
+	{ STB0899_SYNCDSTRL		, 0x18 },
+	{ STB0899_CFGPDELSTATUS1	, 0x19 },
+	{ STB0899_CFGPDELSTATUS2	, 0x2b },
+	{ STB0899_BBFERRORM		, 0x00 },
+	{ STB0899_BBFERRORL		, 0x01 },
+	{ STB0899_UPKTERRORM		, 0x00 },
+	{ STB0899_UPKTERRORL		, 0x00 },
+	{ 0xffff			, 0xff },
+};
+
+struct stb0899_config vp1041_stb0899_config = {
+	.init_dev		= vp1041_stb0899_s1_init_1,
+	.init_s2_demod		= stb0899_s2_init_2,
+	.init_s1_demod		= vp1041_stb0899_s1_init_3,
+	.init_s2_fec		= stb0899_s2_init_4,
+	.init_tst		= stb0899_s1_init_5,
+
+	.demod_address 		= 0x68, /*  0xd0 >> 1 */
+
+	.xtal_freq		= 27000000,
+	.inversion		= IQ_SWAP_ON, /* 1 */
+
+	.lo_clk			= 76500000,
+	.hi_clk			= 99000000,
+
+	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
+	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
+	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
+	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
+	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
+	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
+	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
+	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
+	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
+
+	.tuner_get_frequency	= stb6100_get_frequency,
+	.tuner_set_frequency	= stb6100_set_frequency,
+	.tuner_set_bandwidth	= stb6100_set_bandwidth,
+	.tuner_get_bandwidth	= stb6100_get_bandwidth,
+	.tuner_set_rfsiggain	= NULL,
+};
+
+struct stb6100_config vp1041_stb6100_config = {
+	.tuner_address	= 0x60,
+	.refclock	= 27000000,
+};
+
+static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+
+	int err = 0;
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+		mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
+		if (mantis->fe) {
+			dprintk(MANTIS_ERROR, 1,
+				"found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
+				vp1041_stb0899_config.demod_address);
+
+			if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
+				if (!lnbp21_attach(mantis->fe, adapter, 0, 0))
+					dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
+			}
+		} else {
+			return -EREMOTEIO;
+		}
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+
+
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp1041_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_188,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp1041_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h
new file mode 100644
index 0000000..1ae5b3d
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp1041.h
@@ -0,0 +1,33 @@
+/*
+	Mantis VP-1041 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP1041_H
+#define __MANTIS_VP1041_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_1041_DVB_S2	0x0031
+#define SKYSTAR_HD2_10		0x0001
+#define SKYSTAR_HD2_20		0x0003
+#define CINERGY_S2_PCI_HD	0x1179
+
+extern struct mantis_hwconfig vp1041_config;
+
+#endif /* __MANTIS_VP1041_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
new file mode 100644
index 0000000..10ce817
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -0,0 +1,187 @@
+/*
+	Mantis VP-2033 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2033.h"
+
+#define MANTIS_MODEL_NAME	"VP-2033"
+#define MANTIS_DEV_TYPE		"DVB-C"
+
+struct tda1002x_config vp2033_tda1002x_cu1216_config = {
+	.demod_address = 0x18 >> 1,
+	.invert = 1,
+};
+
+struct tda10023_config vp2033_tda10023_cu1216_config = {
+	.demod_address = 0x18 >> 1,
+	.invert = 1,
+};
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+	struct i2c_adapter *adapter = &mantis->adapter;
+
+	u8 b = 0xff;
+	u8 pwm;
+	struct i2c_msg msg[] = {
+		{.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+		{.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+	};
+
+	if ((i2c_transfer(adapter, msg, 2) != 2)
+	    || (pwm == 0xff))
+		pwm = 0x48;
+
+	return pwm;
+}
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct mantis_pci *mantis = fe->dvb->priv;
+	struct i2c_adapter *adapter = &mantis->adapter;
+
+	u8 buf[6];
+	struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+	int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+	u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0xce;
+	buf[3] = (params->frequency < 150000000 ? 0x01 :
+		  params->frequency < 445000000 ? 0x02 : 0x04);
+	buf[4] = 0xde;
+	buf[5] = 0x20;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	if (i2c_transfer(adapter, &msg, 1) != 1)
+		return -EIO;
+
+	/* wait for the pll lock */
+	msg.flags = I2C_M_RD;
+	msg.len = 1;
+	for (i = 0; i < 20; i++) {
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
+
+		if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+			break;
+
+		msleep(10);
+	}
+
+	/* switch the charge pump to the lower current */
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = &buf[2];
+	buf[2] &= ~0x40;
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	if (i2c_transfer(adapter, &msg, 1) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter = &mantis->adapter;
+
+	int err = 0;
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+		fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
+				     adapter,
+				     read_pwm(mantis));
+
+		if (fe) {
+			dprintk(MANTIS_ERROR, 1,
+				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+				vp2033_tda1002x_cu1216_config.demod_address);
+		} else {
+			fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+					     adapter,
+					     read_pwm(mantis));
+
+			if (fe) {
+				dprintk(MANTIS_ERROR, 1,
+					"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+					vp2033_tda1002x_cu1216_config.demod_address);
+			}
+		}
+
+		if (fe) {
+			fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+			dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+		} else {
+			return -1;
+		}
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+
+	mantis->fe = fe;
+	dprintk(MANTIS_DEBUG, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp2033_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_204,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp2033_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h
new file mode 100644
index 0000000..c55242b
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2033.h
@@ -0,0 +1,30 @@
+/*
+	Mantis VP-2033 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2033_H
+#define __MANTIS_VP2033_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2033_DVB_C	0x0008
+
+extern struct mantis_hwconfig vp2033_config;
+
+#endif /* __MANTIS_VP2033_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
new file mode 100644
index 0000000..a7ca233e8
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -0,0 +1,186 @@
+/*
+	Mantis VP-2040 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp2040.h"
+
+#define MANTIS_MODEL_NAME	"VP-2040"
+#define MANTIS_DEV_TYPE		"DVB-C"
+
+struct tda1002x_config vp2040_tda1002x_cu1216_config = {
+	.demod_address	= 0x18 >> 1,
+	.invert		= 1,
+};
+
+struct tda10023_config vp2040_tda10023_cu1216_config = {
+	.demod_address	= 0x18 >> 1,
+	.invert		= 1,
+};
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+	struct mantis_pci *mantis	= fe->dvb->priv;
+	struct i2c_adapter *adapter	= &mantis->adapter;
+
+	u8 buf[6];
+	struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
+	int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+	u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0xce;
+	buf[3] = (params->frequency < 150000000 ? 0x01 :
+		  params->frequency < 445000000 ? 0x02 : 0x04);
+	buf[4] = 0xde;
+	buf[5] = 0x20;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	if (i2c_transfer(adapter, &msg, 1) != 1)
+		return -EIO;
+
+	/* wait for the pll lock */
+	msg.flags = I2C_M_RD;
+	msg.len = 1;
+	for (i = 0; i < 20; i++) {
+		if (fe->ops.i2c_gate_ctrl)
+			fe->ops.i2c_gate_ctrl(fe, 1);
+
+		if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+			break;
+
+		msleep(10);
+	}
+
+	/* switch the charge pump to the lower current */
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = &buf[2];
+	buf[2] &= ~0x40;
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	if (i2c_transfer(adapter, &msg, 1) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+	struct i2c_adapter *adapter = &mantis->adapter;
+
+	u8 b = 0xff;
+	u8 pwm;
+	struct i2c_msg msg[] = {
+		{.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+		{.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+	};
+
+	if ((i2c_transfer(adapter, msg, 2) != 2)
+	    || (pwm == 0xff))
+		pwm = 0x48;
+
+	return pwm;
+}
+
+static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter = &mantis->adapter;
+
+	int err = 0;
+
+	err = mantis_frontend_power(mantis, POWER_ON);
+	if (err == 0) {
+		mantis_frontend_soft_reset(mantis);
+		msleep(250);
+
+		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+		fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
+				     adapter,
+				     read_pwm(mantis));
+
+		if (fe) {
+			dprintk(MANTIS_ERROR, 1,
+				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+				vp2040_tda1002x_cu1216_config.demod_address);
+		} else {
+			fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+					     adapter,
+					     read_pwm(mantis));
+
+			if (fe) {
+				dprintk(MANTIS_ERROR, 1,
+					"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+					vp2040_tda1002x_cu1216_config.demod_address);
+			}
+		}
+
+		if (fe) {
+			fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+			dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+		} else {
+			return -1;
+		}
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+	}
+	mantis->fe = fe;
+	dprintk(MANTIS_DEBUG, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp2040_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_204,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp2040_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h
new file mode 100644
index 0000000..d125e21
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp2040.h
@@ -0,0 +1,32 @@
+/*
+	Mantis VP-2040 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP2040_H
+#define __MANTIS_VP2040_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_2040_DVB_C	0x0043
+#define CINERGY_C		0x1178
+#define CABLESTAR_HD2		0x0002
+
+extern struct mantis_hwconfig vp2040_config;
+
+#endif /* __MANTIS_VP2040_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c
new file mode 100644
index 0000000..4155c83
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3028.c
@@ -0,0 +1,38 @@
+/*
+	Mantis VP-3028 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "mantis_common.h"
+#include "mantis_vp3028.h"
+
+struct zl10353_config mantis_vp3028_config = {
+	.demod_address	= 0x0f,
+};
+
+#define MANTIS_MODEL_NAME	"VP-3028"
+#define MANTIS_DEV_TYPE		"DVB-T"
+
+struct mantis_hwconfig vp3028_mantis_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_188,
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h
new file mode 100644
index 0000000..b07be6a
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3028.h
@@ -0,0 +1,33 @@
+/*
+	Mantis VP-3028 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "dvb_frontend.h"
+#include "mantis_common.h"
+#include "zl10353.h"
+
+#define MANTIS_VP_3028_DVB_T	0x0028
+
+extern struct zl10353_config mantis_vp3028_config;
+extern struct mantis_hwconfig vp3028_mantis_config;
+
+#endif /* __MANTIS_VP3028_H */
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c
new file mode 100644
index 0000000..1f43342
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3030.c
@@ -0,0 +1,105 @@
+/*
+	Mantis VP-3030 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "tda665x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp3030.h"
+
+struct zl10353_config mantis_vp3030_config = {
+	.demod_address		= 0x0f,
+};
+
+struct tda665x_config env57h12d5_config = {
+	.name			= "ENV57H12D5 (ET-50DT)",
+	.addr			= 0x60,
+	.frequency_min		=  47000000,
+	.frequency_max		= 862000000,
+	.frequency_offst	=   3616667,
+	.ref_multiplier		= 6, /* 1/6 MHz */
+	.ref_divider		= 100000, /* 1/6 MHz */
+};
+
+#define MANTIS_MODEL_NAME	"VP-3030"
+#define MANTIS_DEV_TYPE		"DVB-T"
+
+
+static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+	struct mantis_hwconfig *config	= mantis->hwconfig;
+	int err = 0;
+
+	gpio_set_bits(mantis, config->reset, 0);
+	msleep(100);
+	err = mantis_frontend_power(mantis, POWER_ON);
+	msleep(100);
+	gpio_set_bits(mantis, config->reset, 1);
+
+	if (err == 0) {
+		msleep(250);
+		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+		fe = zl10353_attach(&mantis_vp3030_config, adapter);
+
+		if (!fe)
+			return -1;
+
+		tda665x_attach(fe, &env57h12d5_config, adapter);
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+
+	}
+	mantis->fe = fe;
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp3030_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_188,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp3030_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
+
+	.i2c_mode	= MANTIS_BYTE_MODE
+};
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h
new file mode 100644
index 0000000..5f12c42
--- /dev/null
+++ b/drivers/media/dvb/mantis/mantis_vp3030.h
@@ -0,0 +1,30 @@
+/*
+	Mantis VP-3030 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __MANTIS_VP3030_H
+#define __MANTIS_VP3030_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3030_DVB_T	0x0024
+
+extern struct mantis_hwconfig vp3030_config;
+
+#endif /* __MANTIS_VP3030_H */
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 3182a40..ae08b07 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -4461,6 +4461,7 @@
 		request_modules(btv);
 	}
 
+	init_bttv_i2c_ir(btv);
 	bttv_input_init(btv);
 
 	/* everything is fine */
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 63aa31a..407fa61 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -388,7 +388,12 @@
 	if (0 == btv->i2c_rc && i2c_scan)
 		do_i2c_scan(btv->c.v4l2_dev.name, &btv->i2c_client);
 
-	/* Instantiate the IR receiver device, if present */
+	return btv->i2c_rc;
+}
+
+/* Instantiate the I2C IR receiver device, if present */
+void __devinit init_bttv_i2c_ir(struct bttv *btv)
+{
 	if (0 == btv->i2c_rc) {
 		struct i2c_board_info info;
 		/* The external IR receiver is at i2c address 0x34 (0x35 for
@@ -408,7 +413,6 @@
 		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 		i2c_new_probed_device(&btv->c.i2c_adap, &info, addr_list);
 	}
-	return btv->i2c_rc;
 }
 
 int __devexit fini_bttv_i2c(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index a1d0e9c..6cccc2a 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -279,6 +279,7 @@
 extern unsigned int bttv_gpio;
 extern void bttv_gpio_tracking(struct bttv *btv, char *comment);
 extern int init_bttv_i2c(struct bttv *btv);
+extern void init_bttv_i2c_ir(struct bttv *btv);
 extern int fini_bttv_i2c(struct bttv *btv);
 
 #define bttv_printk if (bttv_verbose) printk
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index e930a67..bd6214d 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1815,6 +1815,8 @@
 	/* put the buffer in the 'queued' queue */
 	i = gspca_dev->fr_q;
 	gspca_dev->fr_queue[i] = index;
+	if (gspca_dev->fr_i == i)
+		gspca_dev->cur_frame = frame;
 	gspca_dev->fr_q = (i + 1) % gspca_dev->nframes;
 	PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d",
 		gspca_dev->fr_q,
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index aa2f3c7e..1b536f7d 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -48,6 +48,12 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528")
 		}
 	}, {
+		.ident = "Fujitsu-Siemens Amilo Xi 2428",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2428")
+		}
+	}, {
 		.ident = "Fujitsu-Siemens Amilo Xi 2528",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 4dbb882..0a6b8f0 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -1533,7 +1533,7 @@
 static void setsharpness_96(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	u8 val;
+	s8 val;
 
 	val = sd->sharpness;
 	if (val < 0) {				/* auto */
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 4cff803..0ca1c06 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -2319,7 +2319,7 @@
 		}
 	}
 	if (avg_lum > MAX_AVG_LUM) {
-		if (sd->gain - 1 >= 0) {
+		if (sd->gain >= 1) {
 			sd->gain--;
 			set_gain(gspca_dev);
 		}
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
index 487d405..96c6192 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
@@ -228,6 +228,7 @@
 	/* This reg is written twice. Some kind of reset? */
 	{NULL,  0x1620, 0x80},
 	{NULL,  0x1620, 0x00},
+	{NULL,  0x1443, 0x00},
 	{NULL,  0x1423, 0x04},
 	{x1500, 0x1500, ARRAY_SIZE(x1500)},
 	{x1536, 0x1536, ARRAY_SIZE(x1536)},
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 716df6b..306b7d7 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -709,7 +709,7 @@
 		spca504B_PollingDataReady(gspca_dev);
 
 		/* Init the cam width height with some values get on init ? */
-		reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+		reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
 		spca504B_WaitCmdStatus(gspca_dev);
 		spca504B_PollingDataReady(gspca_dev);
 		break;
@@ -807,14 +807,14 @@
 	default:
 /*	case BRIDGE_SPCA533: */
 /*	case BRIDGE_SPCA504B: */
-		reg_w_riv(gspca_dev, 0, 0x00, 0x21ad);	/* hue */
-		reg_w_riv(gspca_dev, 0, 0x01, 0x21ac);	/* sat/hue */
-		reg_w_riv(gspca_dev, 0, 0x00, 0x21a3);	/* gamma */
+		reg_w_riv(gspca_dev, 0, 0x21ad, 0x00);	/* hue */
+		reg_w_riv(gspca_dev, 0, 0x21ac, 0x01);	/* sat/hue */
+		reg_w_riv(gspca_dev, 0, 0x21a3, 0x00);	/* gamma */
 		break;
 	case BRIDGE_SPCA536:
-		reg_w_riv(gspca_dev, 0, 0x40, 0x20f5);
-		reg_w_riv(gspca_dev, 0, 0x01, 0x20f4);
-		reg_w_riv(gspca_dev, 0, 0x00, 0x2089);
+		reg_w_riv(gspca_dev, 0, 0x20f5, 0x40);
+		reg_w_riv(gspca_dev, 0, 0x20f4, 0x01);
+		reg_w_riv(gspca_dev, 0, 0x2089, 0x00);
 		break;
 	}
 	if (pollreg)
@@ -887,11 +887,11 @@
 	switch (sd->bridge) {
 	case BRIDGE_SPCA504B:
 		reg_w_riv(gspca_dev, 0x1d, 0x00, 0);
-		reg_w_riv(gspca_dev, 0, 0x01, 0x2306);
-		reg_w_riv(gspca_dev, 0, 0x00, 0x0d04);
-		reg_w_riv(gspca_dev, 0, 0x00, 0x2000);
-		reg_w_riv(gspca_dev, 0, 0x13, 0x2301);
-		reg_w_riv(gspca_dev, 0, 0x00, 0x2306);
+		reg_w_riv(gspca_dev, 0x00, 0x2306, 0x01);
+		reg_w_riv(gspca_dev, 0x00, 0x0d04, 0x00);
+		reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00);
+		reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13);
+		reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00);
 		/* fall thru */
 	case BRIDGE_SPCA533:
 		spca504B_PollingDataReady(gspca_dev);
@@ -1000,7 +1000,7 @@
 			spca504B_WaitCmdStatus(gspca_dev);
 			break;
 		default:
-			reg_w_riv(gspca_dev, 0x31, 0, 0x04);
+			reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00);
 			spca504B_WaitCmdStatus(gspca_dev);
 			spca504B_PollingDataReady(gspca_dev);
 			break;
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index c090efc..71921c8 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -3009,6 +3009,10 @@
 		int l;
 
 		frame = gspca_get_i_frame(gspca_dev);
+		if (frame == NULL) {
+			gspca_dev->last_packet_type = DISCARD_PACKET;
+			return;
+		}
 		l = frame->data_end - frame->data;
 		if (len > frame->v4l2_buf.length - l)
 			len = frame->v4l2_buf.length - l;
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index fc4dd60..7438f8d 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -514,7 +514,7 @@
 	/* poll to verify out of standby. Must Poll this bit */
 	for (i = 0; i < 100; i++) {
 		mt9t112_reg_read(data, client, 0x0018);
-		if (0x4000 & data)
+		if (!(0x4000 & data))
 			break;
 
 		mdelay(10);
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 2ba14fb..c167cc3 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -718,7 +718,7 @@
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (!res || !irq) {
+	if (!res || (int)irq <= 0) {
 		err = -ENODEV;
 		goto exit;
 	}
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 50b415e..f7f7e04 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -753,7 +753,7 @@
 		buf[0] = 0xff; /* fixed */
 
 	ret = send_control_msg(pdev,
-		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
+		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1);
 
 	if (!mode && ret >= 0) {
 		if (value < 0)
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 7e42989..805226e 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -563,7 +563,7 @@
 	struct i2c_client *client = sd->priv;
 	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	struct v4l2_rect *rect = &a->c;
-	unsigned int dummy, output_w, output_h,
+	unsigned int dummy = 0, output_w, output_h,
 		input_w = rect->width, input_h = rect->height;
 	int ret;
 
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 9f85e91..a7ad781 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -420,19 +420,6 @@
 		ctrl |= SAA7134_MAIN_CTRL_TE5;
 		irq  |= SAA7134_IRQ1_INTE_RA2_1 |
 			SAA7134_IRQ1_INTE_RA2_0;
-
-		/* dma: setup channel 5 (= TS) */
-
-		saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
-		saa_writeb(SAA7134_TS_DMA1,
-			((dev->ts.nr_packets - 1) >> 8) & 0xff);
-		/* TSNOPIT=0, TSCOLAP=0 */
-		saa_writeb(SAA7134_TS_DMA2,
-			(((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
-		saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
-		saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
-						  SAA7134_RS_CONTROL_ME |
-						  (dev->ts.pt_ts.dma >> 12));
 	}
 
 	/* set task conditions + field handling */
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 7dfecfc..ee5bff0 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -93,9 +93,9 @@
 	dprintk("open dev=%s\n", video_device_node_name(vdev));
 	err = -EBUSY;
 	if (!mutex_trylock(&dev->empress_tsq.vb_lock))
-		goto done;
+		return err;
 	if (atomic_read(&dev->empress_users))
-		goto done_up;
+		goto done;
 
 	/* Unmute audio */
 	saa_writeb(SAA7134_AUDIO_MUTE_CTRL,
@@ -105,10 +105,8 @@
 	file->private_data = dev;
 	err = 0;
 
-done_up:
-	mutex_unlock(&dev->empress_tsq.vb_lock);
 done:
-	unlock_kernel();
+	mutex_unlock(&dev->empress_tsq.vb_lock);
 	return err;
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c
index 03488ba..b9817d7 100644
--- a/drivers/media/video/saa7134/saa7134-ts.c
+++ b/drivers/media/video/saa7134/saa7134-ts.c
@@ -250,6 +250,19 @@
 
 	BUG_ON(dev->ts_started);
 
+	/* dma: setup channel 5 (= TS) */
+	saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff);
+	saa_writeb(SAA7134_TS_DMA1,
+		((dev->ts.nr_packets - 1) >> 8) & 0xff);
+	/* TSNOPIT=0, TSCOLAP=0 */
+	saa_writeb(SAA7134_TS_DMA2,
+		(((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00);
+	saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE);
+	saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 |
+					  SAA7134_RS_CONTROL_ME |
+					  (dev->ts.pt_ts.dma >> 12));
+
+	/* reset hardware TS buffers */
 	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
 	saa_writeb(SAA7134_TS_SERIAL1, 0x03);
 	saa_writeb(SAA7134_TS_SERIAL1, 0x00);
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index d69363f..f09c714 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -1827,7 +1827,7 @@
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (!res || !irq) {
+	if (!res || (int)irq <= 0) {
 		dev_err(&pdev->dev, "Not enough CEU platform resources.\n");
 		err = -ENODEV;
 		goto exit;
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 0469d7a..ec8ef8c 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1393,7 +1393,7 @@
 	size = entity->processing.bControlSize;
 
 	for (i = 0; i < ARRAY_SIZE(blacklist); ++i) {
-		if (!usb_match_id(dev->intf, &blacklist[i].id))
+		if (!usb_match_one_id(dev->intf, &blacklist[i].id))
 			continue;
 
 		if (blacklist[i].index >= 8 * size ||
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index f854698..ea11839 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -59,9 +59,9 @@
  *    returns immediately.
  *
  *    When the buffer is full, the completion handler removes it from the irq
- *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
+ *    queue, marks it as done (UVC_BUF_STATE_DONE) and wakes its wait queue.
  *    At that point, any process waiting on the buffer will be woken up. If a
- *    process tries to dequeue a buffer after it has been marked ready, the
+ *    process tries to dequeue a buffer after it has been marked done, the
  *    dequeing will succeed immediately.
  *
  * 2. Buffers are queued, user is waiting on a buffer and the device gets
@@ -201,6 +201,7 @@
 		break;
 	case UVC_BUF_STATE_QUEUED:
 	case UVC_BUF_STATE_ACTIVE:
+	case UVC_BUF_STATE_READY:
 		v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
 		break;
 	case UVC_BUF_STATE_IDLE:
@@ -295,13 +296,15 @@
 {
 	if (nonblocking) {
 		return (buf->state != UVC_BUF_STATE_QUEUED &&
-			buf->state != UVC_BUF_STATE_ACTIVE)
+			buf->state != UVC_BUF_STATE_ACTIVE &&
+			buf->state != UVC_BUF_STATE_READY)
 			? 0 : -EAGAIN;
 	}
 
 	return wait_event_interruptible(buf->wait,
 		buf->state != UVC_BUF_STATE_QUEUED &&
-		buf->state != UVC_BUF_STATE_ACTIVE);
+		buf->state != UVC_BUF_STATE_ACTIVE &&
+		buf->state != UVC_BUF_STATE_READY);
 }
 
 /*
@@ -348,6 +351,7 @@
 	case UVC_BUF_STATE_IDLE:
 	case UVC_BUF_STATE_QUEUED:
 	case UVC_BUF_STATE_ACTIVE:
+	case UVC_BUF_STATE_READY:
 	default:
 		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
 			"(driver bug?).\n", buf->state);
@@ -489,6 +493,7 @@
 
 	spin_lock_irqsave(&queue->irqlock, flags);
 	list_del(&buf->queue);
+	buf->state = UVC_BUF_STATE_DONE;
 	if (!list_empty(&queue->irqqueue))
 		nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
 					   queue);
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 9a98028..7dcf534 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -441,7 +441,7 @@
 	if (fid != stream->last_fid && buf->buf.bytesused != 0) {
 		uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit "
 				"toggled).\n");
-		buf->state = UVC_BUF_STATE_DONE;
+		buf->state = UVC_BUF_STATE_READY;
 		return -EAGAIN;
 	}
 
@@ -470,7 +470,7 @@
 	/* Complete the current frame if the buffer size was exceeded. */
 	if (len > maxlen) {
 		uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n");
-		buf->state = UVC_BUF_STATE_DONE;
+		buf->state = UVC_BUF_STATE_READY;
 	}
 }
 
@@ -482,7 +482,7 @@
 		uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
 		if (data[0] == len)
 			uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n");
-		buf->state = UVC_BUF_STATE_DONE;
+		buf->state = UVC_BUF_STATE_READY;
 		if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID)
 			stream->last_fid ^= UVC_STREAM_FID;
 	}
@@ -568,8 +568,7 @@
 		uvc_video_decode_end(stream, buf, mem,
 			urb->iso_frame_desc[i].actual_length);
 
-		if (buf->state == UVC_BUF_STATE_DONE ||
-		    buf->state == UVC_BUF_STATE_ERROR)
+		if (buf->state == UVC_BUF_STATE_READY)
 			buf = uvc_queue_next_buffer(&stream->queue, buf);
 	}
 }
@@ -627,8 +626,7 @@
 		if (!stream->bulk.skip_payload && buf != NULL) {
 			uvc_video_decode_end(stream, buf, stream->bulk.header,
 				stream->bulk.payload_size);
-			if (buf->state == UVC_BUF_STATE_DONE ||
-			    buf->state == UVC_BUF_STATE_ERROR)
+			if (buf->state == UVC_BUF_STATE_READY)
 				buf = uvc_queue_next_buffer(&stream->queue,
 							    buf);
 		}
@@ -669,7 +667,7 @@
 	    stream->bulk.payload_size == stream->bulk.max_payload_size) {
 		if (buf->buf.bytesused == stream->queue.buf_used) {
 			stream->queue.buf_used = 0;
-			buf->state = UVC_BUF_STATE_DONE;
+			buf->state = UVC_BUF_STATE_READY;
 			uvc_queue_next_buffer(&stream->queue, buf);
 			stream->last_fid ^= UVC_STREAM_FID;
 		}
@@ -924,10 +922,8 @@
 static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags)
 {
 	struct usb_interface *intf = stream->intf;
-	struct usb_host_interface *alts;
-	struct usb_host_endpoint *ep = NULL;
-	int intfnum = stream->intfnum;
-	unsigned int bandwidth, psize, i;
+	struct usb_host_endpoint *ep;
+	unsigned int i;
 	int ret;
 
 	stream->last_fid = -1;
@@ -936,6 +932,12 @@
 	stream->bulk.payload_size = 0;
 
 	if (intf->num_altsetting > 1) {
+		struct usb_host_endpoint *best_ep = NULL;
+		unsigned int best_psize = 3 * 1024;
+		unsigned int bandwidth;
+		unsigned int uninitialized_var(altsetting);
+		int intfnum = stream->intfnum;
+
 		/* Isochronous endpoint, select the alternate setting. */
 		bandwidth = stream->ctrl.dwMaxPayloadTransferSize;
 
@@ -949,6 +951,9 @@
 		}
 
 		for (i = 0; i < intf->num_altsetting; ++i) {
+			struct usb_host_interface *alts;
+			unsigned int psize;
+
 			alts = &intf->altsetting[i];
 			ep = uvc_find_endpoint(alts,
 				stream->header.bEndpointAddress);
@@ -958,21 +963,27 @@
 			/* Check if the bandwidth is high enough. */
 			psize = le16_to_cpu(ep->desc.wMaxPacketSize);
 			psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
-			if (psize >= bandwidth)
-				break;
+			if (psize >= bandwidth && psize <= best_psize) {
+				altsetting = i;
+				best_psize = psize;
+				best_ep = ep;
+			}
 		}
 
-		if (i >= intf->num_altsetting) {
+		if (best_ep == NULL) {
 			uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting "
 				"for requested bandwidth.\n");
 			return -EIO;
 		}
 
-		ret = usb_set_interface(stream->dev->udev, intfnum, i);
+		uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u "
+			"(%u B/frame bandwidth).\n", altsetting, best_psize);
+
+		ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
 		if (ret < 0)
 			return ret;
 
-		ret = uvc_init_video_isoc(stream, ep, gfp_flags);
+		ret = uvc_init_video_isoc(stream, best_ep, gfp_flags);
 	} else {
 		/* Bulk endpoint, proceed to URB initialization. */
 		ep = uvc_find_endpoint(&intf->altsetting[0],
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index 7ec9a04..2337585 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -365,8 +365,9 @@
 	UVC_BUF_STATE_IDLE	= 0,
 	UVC_BUF_STATE_QUEUED	= 1,
 	UVC_BUF_STATE_ACTIVE	= 2,
-	UVC_BUF_STATE_DONE	= 3,
-	UVC_BUF_STATE_ERROR	= 4,
+	UVC_BUF_STATE_READY	= 3,
+	UVC_BUF_STATE_DONE	= 4,
+	UVC_BUF_STATE_ERROR	= 5,
 };
 
 struct uvc_buffer {
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 85bc6a6..44d2037 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -4330,6 +4330,8 @@
 
 	if (ioc->bus_type == SPI)
 		num_chain *= MPT_SCSI_CAN_QUEUE;
+	else if (ioc->bus_type == SAS)
+		num_chain *= MPT_SAS_CAN_QUEUE;
 	else
 		num_chain *= MPT_FC_CAN_QUEUE;
 
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 5775275..81279b3 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1796,7 +1796,7 @@
 		dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
 		   "Command not in the active list! (sc=%p)\n", ioc->name,
 		   SCpnt));
-		retval = 0;
+		retval = SUCCESS;
 		goto out;
 	}
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ca2f2c4..e09eb48 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
-obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
+obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
 obj-$(CONFIG_MFD_SH_MOBILE_SDHI)		+= sh_mobile_sdhi.o
 
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
@@ -11,9 +11,9 @@
 
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 
-obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o
-obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
-obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
+obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
+obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o tmio_core.o
 
 obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
 wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index e22128c..95c1e6b 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -80,6 +80,7 @@
 	u16 irq_bothedge[4];
 	struct gpio_chip gpio;
 	struct device *dev;
+	void __iomem *tmio_cnf;
 
 	struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
 };
@@ -685,8 +686,24 @@
 	.resources     = ds1wm_resources,
 };
 
+static void asic3_mmc_pwr(struct platform_device *pdev, int state)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
+static void asic3_mmc_clk_div(struct platform_device *pdev, int state)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state);
+}
+
 static struct tmio_mmc_data asic3_mmc_data = {
-	.hclk = 24576000,
+	.hclk           = 24576000,
+	.set_pwr        = asic3_mmc_pwr,
+	.set_clk_div    = asic3_mmc_clk_div,
 };
 
 static struct resource asic3_mmc_resources[] = {
@@ -696,11 +713,6 @@
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start = ASIC3_SD_CONFIG_BASE,
-		.end   = ASIC3_SD_CONFIG_BASE + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
 		.start = 0,
 		.end   = 0,
 		.flags = IORESOURCE_IRQ,
@@ -743,6 +755,10 @@
 	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
 			   ASIC3_SDHWCTRL_SDPWR, 1);
 
+	/* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */
+	tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift,
+			     ASIC3_SD_CTRL_BASE >> 1);
+
 	return 0;
 }
 
@@ -797,10 +813,15 @@
 	asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
 
 	/* MMC */
+	asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
+				 mem_sdio->start, 0x400 >> asic->bus_shift);
+	if (!asic->tmio_cnf) {
+		ret = -ENOMEM;
+		dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n");
+		goto out;
+	}
 	asic3_mmc_resources[0].start >>= asic->bus_shift;
 	asic3_mmc_resources[0].end   >>= asic->bus_shift;
-	asic3_mmc_resources[1].start >>= asic->bus_shift;
-	asic3_mmc_resources[1].end   >>= asic->bus_shift;
 
 	asic3_cell_mmc.platform_data = &asic3_cell_mmc;
 	asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc);
@@ -820,7 +841,10 @@
 
 static void asic3_mfd_remove(struct platform_device *pdev)
 {
+	struct asic3 *asic = platform_get_drvdata(pdev);
+
 	mfd_remove_devices(&pdev->dev);
+	iounmap(asic->tmio_cnf);
 }
 
 /* Core */
diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c
index a1ade23..735c8a4 100644
--- a/drivers/mfd/mc13783-core.c
+++ b/drivers/mfd/mc13783-core.c
@@ -619,6 +619,8 @@
 	}
 	/* This should go away (END) */
 
+	mc13783_unlock(mc13783);
+
 	if (pdata->flags & MC13783_USE_ADC)
 		mc13783_add_subdevice(mc13783, "mc13783-adc");
 
@@ -641,8 +643,6 @@
 	if (pdata->flags & MC13783_USE_TOUCHSCREEN)
 		mc13783_add_subdevice(mc13783, "mc13783-ts");
 
-	mc13783_unlock(mc13783);
-
 	return 0;
 }
 
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 0a255c1..bcf4687 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -38,6 +38,19 @@
 	T7L66XB_CELL_MMC,
 };
 
+static const struct resource t7l66xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end	= 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_T7L66XB_MMC,
+		.end	= IRQ_T7L66XB_MMC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 #define SCR_REVID	0x08		/* b Revision ID	*/
 #define SCR_IMR		0x42		/* b Interrupt Mask	*/
 #define SCR_DEV_CTL	0xe0		/* b Device control	*/
@@ -83,6 +96,9 @@
 
 	spin_unlock_irqrestore(&t7l66xb->lock, flags);
 
+	tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+		t7l66xb_mmc_resources[0].start & 0xfffe);
+
 	return 0;
 }
 
@@ -106,28 +122,28 @@
 	return 0;
 }
 
+static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state);
+}
+
+static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state);
+}
+
 /*--------------------------------------------------------------------------*/
 
 static struct tmio_mmc_data t7166xb_mmc_data = {
 	.hclk = 24000000,
-};
-
-static const struct resource t7l66xb_mmc_resources[] = {
-	{
-		.start = 0x800,
-		.end	= 0x9ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x200,
-		.end	= 0x2ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_T7L66XB_MMC,
-		.end	= IRQ_T7L66XB_MMC,
-		.flags = IORESOURCE_IRQ,
-	},
+	.set_pwr = t7l66xb_mmc_pwr,
+	.set_clk_div = t7l66xb_mmc_clk_div,
 };
 
 static const struct resource t7l66xb_nand_resources[] = {
@@ -282,6 +298,9 @@
 	if (pdata && pdata->resume)
 		pdata->resume(dev);
 
+	tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0,
+		t7l66xb_mmc_resources[0].start & 0xfffe);
+
 	return 0;
 }
 #else
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 3280ab33..5c7f043 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -22,28 +22,52 @@
 	TC6387XB_CELL_MMC,
 };
 
+struct tc6387xb {
+	void __iomem *scr;
+	struct clk *clk32k;
+	struct resource rscr;
+};
+
+static struct resource tc6387xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end   = 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0,
+		.end   = 0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/*--------------------------------------------------------------------------*/
+
 #ifdef CONFIG_PM
 static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct clk *clk32k = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
 	struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
 
 	if (pdata && pdata->suspend)
 		pdata->suspend(dev);
-	clk_disable(clk32k);
+	clk_disable(tc6387xb->clk32k);
 
 	return 0;
 }
 
 static int tc6387xb_resume(struct platform_device *dev)
 {
-	struct clk *clk32k = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
 	struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
 
-	clk_enable(clk32k);
+	clk_enable(tc6387xb->clk32k);
 	if (pdata && pdata->resume)
 		pdata->resume(dev);
 
+	tmio_core_mmc_resume(tc6387xb->scr + 0x200, 0,
+		tc6387xb_mmc_resources[0].start & 0xfffe);
+
 	return 0;
 }
 #else
@@ -53,12 +77,32 @@
 
 /*--------------------------------------------------------------------------*/
 
+static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state);
+}
+
+static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state);
+}
+
+
 static int tc6387xb_mmc_enable(struct platform_device *mmc)
 {
 	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
-	struct clk *clk32k = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
 
-	clk_enable(clk32k);
+	clk_enable(tc6387xb->clk32k);
+
+	tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0,
+		tc6387xb_mmc_resources[0].start & 0xfffe);
 
 	return 0;
 }
@@ -66,36 +110,20 @@
 static int tc6387xb_mmc_disable(struct platform_device *mmc)
 {
 	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
-	struct clk *clk32k = platform_get_drvdata(dev);
+	struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
 
-	clk_disable(clk32k);
+	clk_disable(tc6387xb->clk32k);
 
 	return 0;
 }
 
-/*--------------------------------------------------------------------------*/
-
 static struct tmio_mmc_data tc6387xb_mmc_data = {
 	.hclk = 24000000,
+	.set_pwr = tc6387xb_mmc_pwr,
+	.set_clk_div = tc6387xb_mmc_clk_div,
 };
 
-static struct resource tc6387xb_mmc_resources[] = {
-	{
-		.start = 0x800,
-		.end   = 0x9ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x200,
-		.end   = 0x2ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0,
-		.end   = 0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
+/*--------------------------------------------------------------------------*/
 
 static struct mfd_cell tc6387xb_cells[] = {
 	[TC6387XB_CELL_MMC] = {
@@ -111,8 +139,9 @@
 static int tc6387xb_probe(struct platform_device *dev)
 {
 	struct tc6387xb_platform_data *pdata = dev->dev.platform_data;
-	struct resource *iomem;
+	struct resource *iomem, *rscr;
 	struct clk *clk32k;
+	struct tc6387xb *tc6387xb;
 	int irq, ret;
 
 	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -120,18 +149,40 @@
 		return -EINVAL;
 	}
 
+	tc6387xb = kzalloc(sizeof *tc6387xb, GFP_KERNEL);
+	if (!tc6387xb)
+		return -ENOMEM;
+
 	ret  = platform_get_irq(dev, 0);
 	if (ret >= 0)
 		irq = ret;
 	else
-		goto err_resource;
+		goto err_no_irq;
 
 	clk32k = clk_get(&dev->dev, "CLK_CK32K");
 	if (IS_ERR(clk32k)) {
 		ret = PTR_ERR(clk32k);
-		goto err_resource;
+		goto err_no_clk;
 	}
-	platform_set_drvdata(dev, clk32k);
+
+	rscr = &tc6387xb->rscr;
+	rscr->name = "tc6387xb-core";
+	rscr->start = iomem->start;
+	rscr->end = iomem->start + 0xff;
+	rscr->flags = IORESOURCE_MEM;
+
+	ret = request_resource(iomem, rscr);
+	if (ret)
+		goto err_resource;
+
+	tc6387xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	if (!tc6387xb->scr) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	tc6387xb->clk32k = clk32k;
+	platform_set_drvdata(dev, tc6387xb);
 
 	if (pdata && pdata->enable)
 		pdata->enable(dev);
@@ -149,8 +200,13 @@
 	if (!ret)
 		return 0;
 
-	clk_put(clk32k);
+err_ioremap:
+	release_resource(&tc6387xb->rscr);
 err_resource:
+	clk_put(clk32k);
+err_no_clk:
+err_no_irq:
+	kfree(tc6387xb);
 	return ret;
 }
 
@@ -195,3 +251,4 @@
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Ian Molton");
 MODULE_ALIAS("platform:tc6387xb");
+
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 1429a73..4bc5a08 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,10 +136,6 @@
 	return 0;
 }
 
-static struct tmio_mmc_data tc6393xb_mmc_data = {
-	.hclk = 24000000,
-};
-
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
 		.start	= 0x1000,
@@ -165,11 +161,6 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= 0x200,
-		.end	= 0x2ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
 		.start	= IRQ_TC6393_MMC,
 		.end	= IRQ_TC6393_MMC,
 		.flags	= IORESOURCE_IRQ,
@@ -346,6 +337,50 @@
 }
 EXPORT_SYMBOL(tc6393xb_lcd_mode);
 
+static int tc6393xb_mmc_enable(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0,
+		tc6393xb_mmc_resources[0].start & 0xfffe);
+
+	return 0;
+}
+
+static int tc6393xb_mmc_resume(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0,
+		tc6393xb_mmc_resources[0].start & 0xfffe);
+
+	return 0;
+}
+
+static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state);
+}
+
+static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+
+	tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state);
+}
+
+static struct tmio_mmc_data tc6393xb_mmc_data = {
+	.hclk = 24000000,
+	.set_pwr = tc6393xb_mmc_pwr,
+	.set_clk_div = tc6393xb_mmc_clk_div,
+};
+
 static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	[TC6393XB_CELL_NAND] = {
 		.name = "tmio-nand",
@@ -355,6 +390,8 @@
 	},
 	[TC6393XB_CELL_MMC] = {
 		.name = "tmio-mmc",
+		.enable = tc6393xb_mmc_enable,
+		.resume = tc6393xb_mmc_resume,
 		.driver_data = &tc6393xb_mmc_data,
 		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
 		.resources = tc6393xb_mmc_resources,
@@ -836,3 +873,4 @@
 MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
 MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
 MODULE_ALIAS("platform:tc6393xb");
+
diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c
new file mode 100644
index 0000000..eddc19a
--- /dev/null
+++ b/drivers/mfd/tmio_core.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright(c) 2009 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/tmio.h>
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
+{
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+	sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+	/* Disable SD power during suspend */
+	sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01);
+
+	/* The below is required but why? FIXME */
+	sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f);
+
+	/* Power down SD bus */
+	sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00);
+
+	return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_enable);
+
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base)
+{
+
+	/* Enable the MMC/SD Control registers */
+	sd_config_write16(cnf, shift, CNF_CMD, SDCREN);
+	sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe);
+
+	return 0;
+}
+EXPORT_SYMBOL(tmio_core_mmc_resume);
+
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state)
+{
+	sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00);
+}
+EXPORT_SYMBOL(tmio_core_mmc_pwr);
+
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state)
+{
+	sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0);
+}
+EXPORT_SYMBOL(tmio_core_mmc_clk_div);
+
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 8485a70..9a970bd 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -134,8 +134,7 @@
 	    wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
 		return 0;
 
-	if ((reg == WM8350_GPIO_CONFIGURATION_I_O) ||
-	    (reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
+	if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
 	     reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
 	    (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
 	     reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index c8df547..9025f29 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -434,7 +434,7 @@
 			irq_handler_t handler, unsigned long flags,
 			const char *name, void *data)
 {
-	if (irq < 0 || irq > WM8350_NUM_IRQ || !handler)
+	if (irq < 0 || irq >= WM8350_NUM_IRQ || !handler)
 		return -EINVAL;
 
 	if (wm8350->irq[irq].handler)
@@ -453,7 +453,7 @@
 
 int wm8350_free_irq(struct wm8350 *wm8350, int irq)
 {
-	if (irq < 0 || irq > WM8350_NUM_IRQ)
+	if (irq < 0 || irq >= WM8350_NUM_IRQ)
 		return -EINVAL;
 
 	wm8350_mask_irq(wm8350, irq);
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b9f1e84..e7f8027 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -74,6 +74,9 @@
 	}
 
 	mrq->cmd->arg = dev_addr;
+	if (!mmc_card_blockaddr(test->card))
+		mrq->cmd->arg <<= 9;
+
 	mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC;
 
 	if (blocks == 1)
@@ -190,7 +193,7 @@
 	}
 
 	for (i = 0;i < BUFFER_SIZE / 512;i++) {
-		ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1);
+		ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1);
 		if (ret)
 			return ret;
 	}
@@ -219,7 +222,7 @@
 	memset(test->buffer, 0, 512);
 
 	for (i = 0;i < BUFFER_SIZE / 512;i++) {
-		ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1);
+		ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1);
 		if (ret)
 			return ret;
 	}
@@ -426,7 +429,7 @@
 		for (i = 0;i < sectors;i++) {
 			ret = mmc_test_buffer_transfer(test,
 				test->buffer + i * 512,
-				dev_addr + i * 512, 512, 0);
+				dev_addr + i, 512, 0);
 			if (ret)
 				return ret;
 		}
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 7cccc85..e22c3fa 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -46,7 +46,9 @@
 		clk |= 0x100;
 	}
 
-	sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+	if (host->set_clk_div)
+		host->set_clk_div(host->pdev, (clk>>22) & 1);
+
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
 }
 
@@ -427,12 +429,13 @@
 	/* Power sequence - OFF -> ON -> UP */
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF: /* power down SD bus */
-		sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
+		if (host->set_pwr)
+			host->set_pwr(host->pdev, 0);
 		tmio_mmc_clk_stop(host);
 		break;
 	case MMC_POWER_ON: /* power up SD bus */
-
-		sd_config_write8(host, CNF_PWR_CTL_2, 0x02);
+		if (host->set_pwr)
+			host->set_pwr(host->pdev, 1);
 		break;
 	case MMC_POWER_UP: /* start bus clock */
 		tmio_mmc_clk_start(host);
@@ -485,21 +488,15 @@
 {
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
 	struct mmc_host *mmc = platform_get_drvdata(dev);
-	struct tmio_mmc_host *host = mmc_priv(mmc);
 	int ret = 0;
 
 	/* Tell the MFD core we are ready to be enabled */
-	if (cell->enable) {
-		ret = cell->enable(dev);
+	if (cell->resume) {
+		ret = cell->resume(dev);
 		if (ret)
 			goto out;
 	}
 
-	/* Enable the MMC/SD Control registers */
-	sd_config_write16(host, CNF_CMD, SDCREN);
-	sd_config_write32(host, CNF_CTL_BASE,
-		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
 	mmc_resume_host(mmc);
 
 out:
@@ -514,17 +511,16 @@
 {
 	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
 	struct tmio_mmc_data *pdata;
-	struct resource *res_ctl, *res_cnf;
+	struct resource *res_ctl;
 	struct tmio_mmc_host *host;
 	struct mmc_host *mmc;
 	int ret = -EINVAL;
 
-	if (dev->num_resources != 3)
+	if (dev->num_resources != 2)
 		goto out;
 
 	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	if (!res_ctl || !res_cnf)
+	if (!res_ctl)
 		goto out;
 
 	pdata = cell->driver_data;
@@ -539,8 +535,12 @@
 
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
+	host->pdev = dev;
 	platform_set_drvdata(dev, mmc);
 
+	host->set_pwr = pdata->set_pwr;
+	host->set_clk_div = pdata->set_clk_div;
+
 	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
 	host->bus_shift = resource_size(res_ctl) >> 10;
 
@@ -548,10 +548,6 @@
 	if (!host->ctl)
 		goto host_free;
 
-	host->cnf = ioremap(res_cnf->start, resource_size(res_cnf));
-	if (!host->cnf)
-		goto unmap_ctl;
-
 	mmc->ops = &tmio_mmc_ops;
 	mmc->caps = MMC_CAP_4_BIT_DATA;
 	mmc->f_max = pdata->hclk;
@@ -562,23 +558,9 @@
 	if (cell->enable) {
 		ret = cell->enable(dev);
 		if (ret)
-			goto unmap_cnf;
+			goto unmap_ctl;
 	}
 
-	/* Enable the MMC/SD Control registers */
-	sd_config_write16(host, CNF_CMD, SDCREN);
-	sd_config_write32(host, CNF_CTL_BASE,
-		(dev->resource[0].start >> host->bus_shift) & 0xfffe);
-
-	/* Disable SD power during suspend */
-	sd_config_write8(host, CNF_PWR_CTL_3, 0x01);
-
-	/* The below is required but why? FIXME */
-	sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f);
-
-	/* Power down SD bus*/
-	sd_config_write8(host, CNF_PWR_CTL_2, 0x00);
-
 	tmio_mmc_clk_stop(host);
 	reset(host);
 
@@ -586,14 +568,14 @@
 	if (ret >= 0)
 		host->irq = ret;
 	else
-		goto unmap_cnf;
+		goto unmap_ctl;
 
 	disable_mmc_irqs(host, TMIO_MASK_ALL);
 
 	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED |
 		IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host);
 	if (ret)
-		goto unmap_cnf;
+		goto unmap_ctl;
 
 	mmc_add_host(mmc);
 
@@ -605,8 +587,6 @@
 
 	return 0;
 
-unmap_cnf:
-	iounmap(host->cnf);
 unmap_ctl:
 	iounmap(host->ctl);
 host_free:
@@ -626,7 +606,6 @@
 		mmc_remove_host(mmc);
 		free_irq(host->irq, host);
 		iounmap(host->ctl);
-		iounmap(host->cnf);
 		mmc_free_host(mmc);
 	}
 
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 9fa9985..692dc23 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -11,26 +11,6 @@
 
 #include <linux/highmem.h>
 
-#define CNF_CMD     0x04
-#define CNF_CTL_BASE   0x10
-#define CNF_INT_PIN  0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
 #define CTL_SD_CMD 0x00
 #define CTL_ARG_REG 0x04
 #define CTL_STOP_INTERNAL_ACTION 0x08
@@ -110,7 +90,6 @@
 
 
 struct tmio_mmc_host {
-	void __iomem *cnf;
 	void __iomem *ctl;
 	unsigned long bus_shift;
 	struct mmc_command      *cmd;
@@ -119,10 +98,16 @@
 	struct mmc_host         *mmc;
 	int                     irq;
 
+	/* Callbacks for clock / power control */
+	void (*set_pwr)(struct platform_device *host, int state);
+	void (*set_clk_div)(struct platform_device *host, int state);
+
 	/* pio related stuff */
 	struct scatterlist      *sg_ptr;
 	unsigned int            sg_len;
 	unsigned int            sg_off;
+
+	struct platform_device *pdev;
 };
 
 #include <linux/io.h>
@@ -163,25 +148,6 @@
 	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
 }
 
-static inline void sd_config_write8(struct tmio_mmc_host *host, int addr,
-		u8 val)
-{
-	writeb(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write16(struct tmio_mmc_host *host, int addr,
-		u16 val)
-{
-	writew(val, host->cnf + (addr << host->bus_shift));
-}
-
-static inline void sd_config_write32(struct tmio_mmc_host *host, int addr,
-		u32 val)
-{
-	writew(val, host->cnf + (addr << host->bus_shift));
-	writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift));
-}
-
 #include <linux/scatterlist.h>
 #include <linux/blkdev.h>
 
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 4c364d4..2de0cc8 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -549,4 +549,21 @@
 	  To build this as a module select M here, the module will be called
 	  vmu-flash.
 
+config MTD_PISMO
+	tristate "MTD discovery driver for PISMO modules"
+	depends on I2C
+	depends on ARCH_VERSATILE
+	help
+	  This driver allows for discovery of PISMO modules - see
+	  <http://www.pismoworld.org/>.  These are small modules containing
+	  up to five memory devices (eg, SRAM, flash, DOC) described by an
+	  I2C EEPROM.
+
+	  This driver does not create any MTD maps itself; instead it
+	  creates MTD physmap and MTD SRAM platform devices.  If you
+	  enable this option, you should consider enabling MTD_PHYSMAP
+	  and/or MTD_PLATRAM according to the devices on your module.
+
+	  When built as a module, it will be called pismo.ko
+
 endmenu
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
new file mode 100644
index 0000000..c48cad2
--- /dev/null
+++ b/drivers/mtd/maps/pismo.c
@@ -0,0 +1,320 @@
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * For ARM Realview and Versatile platforms
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/pismo.h>
+
+#define PISMO_NUM_CS	5
+
+struct pismo_cs_block {
+	u8	type;
+	u8	width;
+	__le16	access;
+	__le32	size;
+	u32	reserved[2];
+	char	device[32];
+} __packed;
+
+struct pismo_eeprom {
+	struct pismo_cs_block cs[PISMO_NUM_CS];
+	char	board[15];
+	u8	sum;
+} __packed;
+
+struct pismo_mem {
+	phys_addr_t base;
+	u32	size;
+	u16	access;
+	u8	width;
+	u8	type;
+};
+
+struct pismo_data {
+	struct i2c_client	*client;
+	void			(*vpp)(void *, int);
+	void			*vpp_data;
+	struct platform_device	*dev[PISMO_NUM_CS];
+};
+
+/* FIXME: set_vpp could do with a better calling convention */
+static struct pismo_data *vpp_pismo;
+static DEFINE_MUTEX(pismo_mutex);
+
+static int pismo_setvpp_probe_fix(struct pismo_data *pismo)
+{
+	mutex_lock(&pismo_mutex);
+	if (vpp_pismo) {
+		mutex_unlock(&pismo_mutex);
+		kfree(pismo);
+		return -EBUSY;
+	}
+	vpp_pismo = pismo;
+	mutex_unlock(&pismo_mutex);
+	return 0;
+}
+
+static void pismo_setvpp_remove_fix(struct pismo_data *pismo)
+{
+	mutex_lock(&pismo_mutex);
+	if (vpp_pismo == pismo)
+		vpp_pismo = NULL;
+	mutex_unlock(&pismo_mutex);
+}
+
+static void pismo_set_vpp(struct map_info *map, int on)
+{
+	struct pismo_data *pismo = vpp_pismo;
+
+	pismo->vpp(pismo->vpp_data, on);
+}
+/* end of hack */
+
+
+static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
+{
+	width &= 15;
+	if (width > 2)
+		return 0;
+	return 1 << width;
+}
+
+static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf,
+	u8 addr, size_t size)
+{
+	int ret;
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.len = sizeof(addr),
+			.buf = &addr,
+		}, {
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = size,
+			.buf = buf,
+		},
+	};
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+
+	return ret == ARRAY_SIZE(msg) ? size : -EIO;
+}
+
+static int __devinit pismo_add_device(struct pismo_data *pismo, int i,
+	struct pismo_mem *region, const char *name, void *pdata, size_t psize)
+{
+	struct platform_device *dev;
+	struct resource res = { };
+	phys_addr_t base = region.base;
+	int ret;
+
+	if (base == ~0)
+		return -ENXIO;
+
+	res.start = base;
+	res.end = base + region->size - 1;
+	res.flags = IORESOURCE_MEM;
+
+	dev = platform_device_alloc(name, i);
+	if (!dev)
+		return -ENOMEM;
+	dev->dev.parent = &pismo->client->dev;
+
+	do {
+		ret = platform_device_add_resources(dev, &res, 1);
+		if (ret)
+			break;
+
+		ret = platform_device_add_data(dev, pdata, psize);
+		if (ret)
+			break;
+
+		ret = platform_device_add(dev);
+		if (ret)
+			break;
+
+		pismo->dev[i] = dev;
+		return 0;
+	} while (0);
+
+	platform_device_put(dev);
+	return ret;
+}
+
+static int __devinit pismo_add_nor(struct pismo_data *pismo, int i,
+	struct pismo_mem *region)
+{
+	struct physmap_flash_data data = {
+		.width = region->width,
+	};
+
+	if (pismo->vpp)
+		data.set_vpp = pismo_set_vpp;
+
+	return pismo_add_device(pismo, i, region, "physmap-flash",
+		&data, sizeof(data));
+}
+
+static int __devinit pismo_add_sram(struct pismo_data *pismo, int i,
+	struct pismo_mem *region)
+{
+	struct platdata_mtd_ram data = {
+		.bankwidth = region->width,
+	};
+
+	return pismo_add_device(pismo, i, region, "mtd-ram",
+		&data, sizeof(data));
+}
+
+static void __devinit pismo_add_one(struct pismo_data *pismo, int i,
+	const struct pismo_cs_block *cs, phys_addr_t base)
+{
+	struct device *dev = &pismo->client->dev;
+	struct pismo_mem region;
+
+	region.base = base;
+	region.type = cs->type;
+	region.width = pismo_width_to_bytes(cs->width);
+	region.access = le16_to_cpu(cs->access);
+	region.size = le32_to_cpu(cs->size);
+
+	if (region.width == 0) {
+		dev_err(dev, "cs%u: bad width: %02x, ignoring\n", i, cs->width);
+		return;
+	}
+
+	/*
+	 * FIXME: may need to the platforms memory controller here, but at
+	 * the moment we assume that it has already been correctly setup.
+	 * The memory controller can also tell us the base address as well.
+	 */
+
+	dev_info(dev, "cs%u: %.32s: type %02x access %u00ps size %uK\n",
+		i, cs->device, region.type, region.access, region.size / 1024);
+
+	switch (region.type) {
+	case 0:
+		break;
+	case 1:
+		/* static DOC */
+		break;
+	case 2:
+		/* static NOR */
+		pismo_add_nor(pismo, i, &region);
+		break;
+	case 3:
+		/* static RAM */
+		pismo_add_sram(pismo, i, &region);
+		break;
+	}
+}
+
+static int __devexit pismo_remove(struct i2c_client *client)
+{
+	struct pismo_data *pismo = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pismo->dev); i++)
+		platform_device_unregister(pismo->dev[i]);
+
+	/* FIXME: set_vpp needs saner arguments */
+	pismo_setvpp_remove_fix(pismo);
+
+	kfree(pismo);
+
+	return 0;
+}
+
+static int __devinit pismo_probe(struct i2c_client *client,
+				 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct pismo_pdata *pdata = client->dev.platform_data;
+	struct pismo_eeprom eeprom;
+	struct pismo_data *pismo;
+	int ret, i;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "functionality mismatch\n");
+		return -EIO;
+	}
+
+	pismo = kzalloc(sizeof(*pismo), GFP_KERNEL);
+	if (!pismo)
+		return -ENOMEM;
+
+	/* FIXME: set_vpp needs saner arguments */
+	ret = pismo_setvpp_probe_fix(pismo);
+	if (ret)
+		return ret;
+
+	pismo->client = client;
+	if (pdata) {
+		pismo->vpp = pdata->set_vpp;
+		pismo->vpp_data = pdata->vpp_data;
+	}
+	i2c_set_clientdata(client, pismo);
+
+	ret = pismo_eeprom_read(client, &eeprom, 0, sizeof(eeprom));
+	if (ret < 0) {
+		dev_err(&client->dev, "error reading EEPROM: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(&client->dev, "%.15s board found\n", eeprom.board);
+
+	for (i = 0; i < ARRAY_SIZE(eeprom.cs); i++)
+		if (eeprom.cs[i].type != 0xff)
+			pismo_add_one(pismo, i, &eeprom.cs[i],
+				      pdata->cs_addrs[i]);
+
+	return 0;
+}
+
+static const struct i2c_device_id pismo_id[] = {
+	{ "pismo" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, pismo_id);
+
+static struct i2c_driver pismo_driver = {
+	.driver	= {
+		.name	= "pismo",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pismo_probe,
+	.remove		= __devexit_p(pismo_remove),
+	.id_table	= pismo_id,
+};
+
+static int __init pismo_init(void)
+{
+	BUILD_BUG_ON(sizeof(struct pismo_cs_block) != 48);
+	BUILD_BUG_ON(sizeof(struct pismo_eeprom) != 256);
+
+	return i2c_add_driver(&pismo_driver);
+}
+module_init(pismo_init);
+
+static void __exit pismo_exit(void)
+{
+	i2c_del_driver(&pismo_driver);
+}
+module_exit(pismo_exit);
+
+MODULE_AUTHOR("Russell King <linux@arm.linux.org.uk>");
+MODULE_DESCRIPTION("PISMO memory driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index a714ec4..92e12df 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -322,7 +322,7 @@
 	memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
 
 	/* Panics must be written immediately */
-	if (reason == KMSG_DUMP_PANIC) {
+	if (reason != KMSG_DUMP_OOPS) {
 		if (!cxt->mtd->panic_write)
 			printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n");
 		else
diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/mtd_readtest.c
index 79fc453..25c5dd0 100644
--- a/drivers/mtd/tests/mtd_readtest.c
+++ b/drivers/mtd/tests/mtd_readtest.c
@@ -147,6 +147,10 @@
 	}
 	memset(bbt, 0 , ebcnt);
 
+	/* NOR flash does not implement block_isbad */
+	if (mtd->block_isbad == NULL)
+		return 0;
+
 	printk(PRINT_PREF "scanning for bad eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
 		bbt[i] = is_block_bad(i) ? 1 : 0;
@@ -184,7 +188,7 @@
 	tmp = mtd->size;
 	do_div(tmp, mtd->erasesize);
 	ebcnt = tmp;
-	pgcnt = mtd->erasesize / mtd->writesize;
+	pgcnt = mtd->erasesize / pgsize;
 
 	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/mtd_speedtest.c
index 141363a..7fbb51d 100644
--- a/drivers/mtd/tests/mtd_speedtest.c
+++ b/drivers/mtd/tests/mtd_speedtest.c
@@ -301,6 +301,10 @@
 	}
 	memset(bbt, 0 , ebcnt);
 
+	/* NOR flash does not implement block_isbad */
+	if (mtd->block_isbad == NULL)
+		goto out;
+
 	printk(PRINT_PREF "scanning for bad eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
 		bbt[i] = is_block_bad(i) ? 1 : 0;
@@ -309,6 +313,7 @@
 		cond_resched();
 	}
 	printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad);
+out:
 	goodebcnt = ebcnt - bad;
 	return 0;
 }
@@ -340,7 +345,7 @@
 	tmp = mtd->size;
 	do_div(tmp, mtd->erasesize);
 	ebcnt = tmp;
-	pgcnt = mtd->erasesize / mtd->writesize;
+	pgcnt = mtd->erasesize / pgsize;
 
 	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c
index 6392047..a99d3cd 100644
--- a/drivers/mtd/tests/mtd_stresstest.c
+++ b/drivers/mtd/tests/mtd_stresstest.c
@@ -227,6 +227,10 @@
 	}
 	memset(bbt, 0 , ebcnt);
 
+	/* NOR flash does not implement block_isbad */
+	if (mtd->block_isbad == NULL)
+		return 0;
+
 	printk(PRINT_PREF "scanning for bad eraseblocks\n");
 	for (i = 0; i < ebcnt; ++i) {
 		bbt[i] = is_block_bad(i) ? 1 : 0;
@@ -265,7 +269,7 @@
 	tmp = mtd->size;
 	do_div(tmp, mtd->erasesize);
 	ebcnt = tmp;
-	pgcnt = mtd->erasesize / mtd->writesize;
+	pgcnt = mtd->erasesize / pgsize;
 
 	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
 	       "page size %u, count of eraseblocks %u, pages per "
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index f237ddb..111ea41 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -853,7 +853,6 @@
 			break;
 		}
 
-		req.name[req.name_len] = '\0';
 		err = verify_mkvol_req(ubi, &req);
 		if (err)
 			break;
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 277786e..1361574 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -291,8 +291,7 @@
  */
 struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode)
 {
-	int error, ubi_num, vol_id;
-	struct ubi_volume_desc *ret;
+	int error, ubi_num, vol_id, mod;
 	struct inode *inode;
 	struct path path;
 
@@ -306,16 +305,16 @@
 		return ERR_PTR(error);
 
 	inode = path.dentry->d_inode;
+	mod = inode->i_mode;
 	ubi_num = ubi_major2num(imajor(inode));
 	vol_id = iminor(inode) - 1;
-
-	if (vol_id >= 0 && ubi_num >= 0)
-		ret = ubi_open_volume(ubi_num, vol_id, mode);
-	else
-		ret = ERR_PTR(-ENODEV);
-
 	path_put(&path);
-	return ret;
+
+	if (!S_ISCHR(mod))
+		return ERR_PTR(-EINVAL);
+	if (vol_id >= 0 && ubi_num >= 0)
+		return ubi_open_volume(ubi_num, vol_id, mode);
+	return ERR_PTR(-ENODEV);
 }
 EXPORT_SYMBOL_GPL(ubi_open_volume_path);
 
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index c1d7b88..425bf5a 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -155,6 +155,7 @@
 		if (err)
 			return err;
 		vol->updating = 0;
+		return 0;
 	}
 
 	vol->upd_buf = vmalloc(ubi->leb_size);
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 1afc61e..40044028 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -566,6 +566,7 @@
 		vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
 		vol->alignment = be32_to_cpu(vtbl[i].alignment);
 		vol->data_pad = be32_to_cpu(vtbl[i].data_pad);
+		vol->upd_marker = vtbl[i].upd_marker;
 		vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ?
 					UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
 		vol->name_len = be16_to_cpu(vtbl[i].name_len);
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 62d9c9c..1dd4403 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -921,7 +921,7 @@
  		size = (res->end - res->start) + 1;
 
 		ax->mem2 = request_mem_region(res->start, size, pdev->name);
-		if (ax->mem == NULL) {
+		if (ax->mem2 == NULL) {
 			dev_err(&pdev->dev, "cannot reserve registers\n");
 			ret = -ENXIO;
 			goto exit_mem1;
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 9fd8e5e..5bc7459 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -276,8 +276,13 @@
 	int link_speed;
 	u8 port_type;
 	u8 transceiver;
+	u8 generation;		/* BladeEngine ASIC generation */
 };
 
+/* BladeEngine Generation numbers */
+#define BE_GEN2 2
+#define BE_GEN3 3
+
 extern const struct ethtool_ops be_ethtool_ops;
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 102ade1..006cb2ef 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -286,7 +286,7 @@
 				MCC_WRB_SGE_CNT_SHIFT;
 	wrb->payload_length = payload_len;
 	wrb->tag0 = opcode;
-	be_dws_cpu_to_le(wrb, 20);
+	be_dws_cpu_to_le(wrb, 8);
 }
 
 /* Don't touch the hdr after it's prepared */
@@ -296,6 +296,7 @@
 	req_hdr->opcode = opcode;
 	req_hdr->subsystem = subsystem;
 	req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+	req_hdr->version = 0;
 }
 
 static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index c002b83..13b33c8 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -164,7 +164,8 @@
 	u8 domain;		/* dword 0 */
 	u32 timeout;		/* dword 1 */
 	u32 request_length;	/* dword 2 */
-	u32 rsvd;		/* dword 3 */
+	u8 version;		/* dword 3 */
+	u8 rsvd[3];		/* dword 3 */
 };
 
 #define RESP_HDR_INFO_OPCODE_SHIFT	0	/* bits 0 - 7 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 3a1f790..626b76c 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -910,7 +910,7 @@
 static void be_post_rx_frags(struct be_adapter *adapter)
 {
 	struct be_rx_page_info *page_info_tbl = adapter->rx_obj.page_info_tbl;
-	struct be_rx_page_info *page_info = NULL;
+	struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL;
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	struct page *pagep = NULL;
 	struct be_eth_rx_d *rxd;
@@ -941,7 +941,6 @@
 		rxd = queue_head_node(rxq);
 		rxd->fragpa_lo = cpu_to_le32(frag_dmaaddr & 0xFFFFFFFF);
 		rxd->fragpa_hi = cpu_to_le32(upper_32_bits(frag_dmaaddr));
-		queue_head_inc(rxq);
 
 		/* Any space left in the current big page for another frag? */
 		if ((page_offset + rx_frag_size + rx_frag_size) >
@@ -949,10 +948,13 @@
 			pagep = NULL;
 			page_info->last_page_user = true;
 		}
+
+		prev_page_info = page_info;
+		queue_head_inc(rxq);
 		page_info = &page_info_tbl[rxq->head];
 	}
 	if (pagep)
-		page_info->last_page_user = true;
+		prev_page_info->last_page_user = true;
 
 	if (posted) {
 		atomic_add(posted, &rxq->used);
@@ -1348,7 +1350,7 @@
 	int isr;
 
 	isr = ioread32(adapter->csr + CEV_ISR0_OFFSET +
-			be_pci_func(adapter) * CEV_ISR_SIZE);
+		(adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE);
 	if (!isr)
 		return IRQ_NONE;
 
@@ -2049,6 +2051,7 @@
 static int be_map_pci_bars(struct be_adapter *adapter)
 {
 	u8 __iomem *addr;
+	int pcicfg_reg;
 
 	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
 			pci_resource_len(adapter->pdev, 2));
@@ -2062,8 +2065,13 @@
 		goto pci_map_err;
 	adapter->db = addr;
 
-	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
-			pci_resource_len(adapter->pdev, 1));
+	if (adapter->generation == BE_GEN2)
+		pcicfg_reg = 1;
+	else
+		pcicfg_reg = 0;
+
+	addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg),
+			pci_resource_len(adapter->pdev, pcicfg_reg));
 	if (addr == NULL)
 		goto pci_map_err;
 	adapter->pcicfg = addr;
@@ -2160,6 +2168,7 @@
 	cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
 	if (cmd->va == NULL)
 		return -1;
+	memset(cmd->va, 0, cmd->size);
 	return 0;
 }
 
@@ -2238,6 +2247,20 @@
 		goto rel_reg;
 	}
 	adapter = netdev_priv(netdev);
+
+	switch (pdev->device) {
+	case BE_DEVICE_ID1:
+	case OC_DEVICE_ID1:
+		adapter->generation = BE_GEN2;
+		break;
+	case BE_DEVICE_ID2:
+	case OC_DEVICE_ID2:
+		adapter->generation = BE_GEN3;
+		break;
+	default:
+		adapter->generation = 0;
+	}
+
 	adapter->pdev = pdev;
 	pci_set_drvdata(pdev, adapter);
 	adapter->netdev = netdev;
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 8ffea39..0b23bc4 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -33,6 +33,7 @@
 #include <asm/dma.h>
 #include <linux/dma-mapping.h>
 
+#include <asm/dpmc.h>
 #include <asm/blackfin.h>
 #include <asm/cacheflush.h>
 #include <asm/portmux.h>
@@ -386,8 +387,8 @@
 	u32 sclk, mdc_div;
 
 	/* Enable PHY output early */
-	if (!(bfin_read_VR_CTL() & PHYCLKOE))
-		bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE);
+	if (!(bfin_read_VR_CTL() & CLKBUFOE))
+		bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
 
 	sclk = get_sclk();
 	mdc_div = ((sclk / MDC_CLK) / 2) - 1;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3f0071c..efa0e41 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3639,7 +3639,7 @@
 		 */
 		if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
 			/* something went wrong - fail the open operation */
-			return -1;
+			return -ENOMEM;
 		}
 
 		INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index bdbd147..318a018 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2079,6 +2079,7 @@
 			 struct sge_fl *fl, int len, int complete)
 {
 	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+	struct port_info *pi = netdev_priv(qs->netdev);
 	struct sk_buff *skb = NULL;
 	struct cpl_rx_pkt *cpl;
 	struct skb_frag_struct *rx_frag;
@@ -2116,11 +2117,18 @@
 
 	if (!nr_frags) {
 		offset = 2 + sizeof(struct cpl_rx_pkt);
-		qs->lro_va = sd->pg_chunk.va + 2;
-	}
-	len -= offset;
+		cpl = qs->lro_va = sd->pg_chunk.va + 2;
 
-	prefetch(qs->lro_va);
+		if ((pi->rx_offload & T3_RX_CSUM) &&
+		     cpl->csum_valid && cpl->csum == htons(0xffff)) {
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+			qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
+		} else
+			skb->ip_summed = CHECKSUM_NONE;
+	} else
+		cpl = qs->lro_va;
+
+	len -= offset;
 
 	rx_frag += nr_frags;
 	rx_frag->page = sd->pg_chunk.page;
@@ -2136,12 +2144,8 @@
 		return;
 
 	skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	cpl = qs->lro_va;
 
 	if (unlikely(cpl->vlan_valid)) {
-		struct net_device *dev = qs->netdev;
-		struct port_info *pi = netdev_priv(dev);
 		struct vlan_group *grp = pi->vlan_grp;
 
 		if (likely(grp != NULL)) {
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 2a567df..e8932db 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -326,6 +326,8 @@
 	/* for ioport free */
 	int bars;
 	int need_ioport;
+
+	bool discarding;
 };
 
 enum e1000_state_t {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 7e855f9..7655436 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1698,18 +1698,6 @@
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
 	switch (adapter->rx_buffer_len) {
-		case E1000_RXBUFFER_256:
-			rctl |= E1000_RCTL_SZ_256;
-			rctl &= ~E1000_RCTL_BSEX;
-			break;
-		case E1000_RXBUFFER_512:
-			rctl |= E1000_RCTL_SZ_512;
-			rctl &= ~E1000_RCTL_BSEX;
-			break;
-		case E1000_RXBUFFER_1024:
-			rctl |= E1000_RCTL_SZ_1024;
-			rctl &= ~E1000_RCTL_BSEX;
-			break;
 		case E1000_RXBUFFER_2048:
 		default:
 			rctl |= E1000_RCTL_SZ_2048;
@@ -2802,13 +2790,13 @@
 dma_error:
 	dev_err(&pdev->dev, "TX DMA map failed\n");
 	buffer_info->dma = 0;
-	count--;
-
-	while (count >= 0) {
+	if (count)
 		count--;
-		i--;
-		if (i < 0)
+
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		e1000_unmap_and_free_tx_resource(adapter, buffer_info);
 	}
@@ -3176,13 +3164,7 @@
 	 *  however with the new *_jumbo_rx* routines, jumbo receives will use
 	 *  fragmented skbs */
 
-	if (max_frame <= E1000_RXBUFFER_256)
-		adapter->rx_buffer_len = E1000_RXBUFFER_256;
-	else if (max_frame <= E1000_RXBUFFER_512)
-		adapter->rx_buffer_len = E1000_RXBUFFER_512;
-	else if (max_frame <= E1000_RXBUFFER_1024)
-		adapter->rx_buffer_len = E1000_RXBUFFER_1024;
-	else if (max_frame <= E1000_RXBUFFER_2048)
+	if (max_frame <= E1000_RXBUFFER_2048)
 		adapter->rx_buffer_len = E1000_RXBUFFER_2048;
 	else
 #if (PAGE_SIZE >= E1000_RXBUFFER_16384)
@@ -3850,13 +3832,22 @@
 
 		length = le16_to_cpu(rx_desc->length);
 		/* !EOP means multiple descriptors were used to store a single
-		 * packet, also make sure the frame isn't just CRC only */
-		if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
+		 * packet, if thats the case we need to toss it.  In fact, we
+		 * to toss every packet with the EOP bit clear and the next
+		 * frame that _does_ have the EOP bit set, as it is by
+		 * definition only a frame fragment
+		 */
+		if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+			adapter->discarding = true;
+
+		if (adapter->discarding) {
 			/* All receives must fit into a single buffer */
 			E1000_DBG("%s: Receive packet consumed multiple"
 				  " buffers\n", netdev->name);
 			/* recycle */
 			buffer_info->skb = skb;
+			if (status & E1000_RXD_STAT_EOP)
+				adapter->discarding = false;
 			goto next_desc;
 		}
 
@@ -4015,11 +4006,21 @@
 			}
 		}
 
-		if (!buffer_info->dma)
+		if (!buffer_info->dma) {
 			buffer_info->dma = pci_map_page(pdev,
 			                                buffer_info->page, 0,
 			                                buffer_info->length,
 			                                PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+				put_page(buffer_info->page);
+				dev_kfree_skb(skb);
+				buffer_info->page = NULL;
+				buffer_info->skb = NULL;
+				buffer_info->dma = 0;
+				adapter->alloc_rx_buff_failed++;
+				break; /* while !buffer_info->skb */
+			}
+		}
 
 		rx_desc = E1000_RX_DESC(*rx_ring, i);
 		rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
@@ -4110,6 +4111,13 @@
 						  skb->data,
 						  buffer_info->length,
 						  PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(pdev, buffer_info->dma)) {
+			dev_kfree_skb(skb);
+			buffer_info->skb = NULL;
+			buffer_info->dma = 0;
+			adapter->alloc_rx_buff_failed++;
+			break; /* while !buffer_info->skb */
+		}
 
 		/*
 		 * XXX if it was allocated cleanly it will never map to a
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index cebbd90..d236efa 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -421,6 +421,7 @@
 /* CRC Stripping defines */
 #define FLAG2_CRC_STRIPPING               (1 << 0)
 #define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
+#define FLAG2_IS_DISCARDING               (1 << 2)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -582,7 +583,6 @@
 extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
                                          u16 data);
-extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
 extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
 extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
 extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index ad08cf3..8b6ecd1 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -138,6 +138,10 @@
 #define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
 #define E1000_NVM_K1_ENABLE 0x1  /* NVM Enable K1 bit */
 
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL      PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW      0x0400
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -219,6 +223,7 @@
 static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
 static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
 static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -270,7 +275,21 @@
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
 	phy->id = e1000_phy_unknown;
-	e1000e_get_phy_id(hw);
+	ret_val = e1000e_get_phy_id(hw);
+	if (ret_val)
+		goto out;
+	if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) {
+		/*
+		 * In case the PHY needs to be in mdio slow mode (eg. 82577),
+		 * set slow mode and try to get the PHY id again.
+		 */
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			goto out;
+	}
 	phy->type = e1000e_get_phy_type_from_id(phy->id);
 
 	switch (phy->type) {
@@ -292,6 +311,7 @@
 		break;
 	}
 
+out:
 	return ret_val;
 }
 
@@ -1076,16 +1096,44 @@
 
 
 /**
+ *  e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ *  @hw:   pointer to the HW structure
+ **/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	u16 data;
+
+	ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+	if (ret_val)
+		return ret_val;
+
+	data |= HV_KMRN_MDIO_SLOW;
+
+	ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+
+	return ret_val;
+}
+
+/**
  *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
  *  done after every PHY reset.
  **/
 static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
 {
 	s32 ret_val = 0;
+	u16 phy_data;
 
 	if (hw->mac.type != e1000_pchlan)
 		return ret_val;
 
+	/* Set MDIO slow mode before any other MDIO access */
+	if (hw->phy.type == e1000_phy_82577) {
+		ret_val = e1000_set_mdio_slow_mode_hv(hw);
+		if (ret_val)
+			goto out;
+	}
+
 	if (((hw->phy.type == e1000_phy_82577) &&
 	     ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
 	    ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
@@ -1118,16 +1166,32 @@
 
 	hw->phy.addr = 1;
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+	hw->phy.ops.release(hw);
 	if (ret_val)
 		goto out;
-	hw->phy.ops.release(hw);
 
 	/*
 	 * Configure the K1 Si workaround during phy reset assuming there is
 	 * link so that it disables K1 if link is in 1Gbps.
 	 */
 	ret_val = e1000_k1_gig_workaround_hv(hw, true);
+	if (ret_val)
+		goto out;
 
+	/* Workaround for link disconnects on a busy hub in half duplex */
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+	ret_val = hw->phy.ops.read_reg_locked(hw,
+	                                      PHY_REG(BM_PORT_CTRL_PAGE, 17),
+	                                      &phy_data);
+	if (ret_val)
+		goto release;
+	ret_val = hw->phy.ops.write_reg_locked(hw,
+	                                       PHY_REG(BM_PORT_CTRL_PAGE, 17),
+	                                       phy_data & 0x00FF);
+release:
+	hw->phy.ops.release(hw);
 out:
 	return ret_val;
 }
@@ -1184,6 +1248,7 @@
 	/* Allow time for h/w to get to a quiescent state after reset */
 	mdelay(10);
 
+	/* Perform any necessary post-reset workarounds */
 	if (hw->mac.type == e1000_pchlan) {
 		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 		if (ret_val)
@@ -2484,6 +2549,10 @@
 	if (!ret_val)
 		e1000_release_swflag_ich8lan(hw);
 
+	/* Perform any necessary post-reset workarounds */
+	if (hw->mac.type == e1000_pchlan)
+		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+
 	if (ctrl & E1000_CTRL_PHY_RST)
 		ret_val = hw->phy.ops.get_cfg_done(hw);
 
@@ -2528,9 +2597,6 @@
 	kab |= E1000_KABGTXD_BGSQLBIAS;
 	ew32(KABGTXD, kab);
 
-	if (hw->mac.type == e1000_pchlan)
-		ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
-
 out:
 	return ret_val;
 }
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c45965a..57f149b 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -450,13 +450,23 @@
 
 		length = le16_to_cpu(rx_desc->length);
 
-		/* !EOP means multiple descriptors were used to store a single
-		 * packet, also make sure the frame isn't just CRC only */
-		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
+		/*
+		 * !EOP means multiple descriptors were used to store a single
+		 * packet, if that's the case we need to toss it.  In fact, we
+		 * need to toss every packet with the EOP bit clear and the
+		 * next frame that _does_ have the EOP bit set, as it is by
+		 * definition only a frame fragment
+		 */
+		if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 			/* All receives must fit into a single buffer */
 			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
+			if (status & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 			goto next_desc;
 		}
 
@@ -745,10 +755,16 @@
 				 PCI_DMA_FROMDEVICE);
 		buffer_info->dma = 0;
 
-		if (!(staterr & E1000_RXD_STAT_EOP)) {
+		/* see !EOP comment in other rx routine */
+		if (!(staterr & E1000_RXD_STAT_EOP))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
 			e_dbg("Packet Split buffers didn't pick up the full "
 			      "packet\n");
 			dev_kfree_skb_irq(skb);
+			if (staterr & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 			goto next_desc;
 		}
 
@@ -1118,6 +1134,7 @@
 
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
+	adapter->flags2 &= ~FLAG2_IS_DISCARDING;
 
 	writel(0, adapter->hw.hw_addr + rx_ring->head);
 	writel(0, adapter->hw.hw_addr + rx_ring->tail);
@@ -2333,18 +2350,6 @@
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
 	switch (adapter->rx_buffer_len) {
-	case 256:
-		rctl |= E1000_RCTL_SZ_256;
-		rctl &= ~E1000_RCTL_BSEX;
-		break;
-	case 512:
-		rctl |= E1000_RCTL_SZ_512;
-		rctl &= ~E1000_RCTL_BSEX;
-		break;
-	case 1024:
-		rctl |= E1000_RCTL_SZ_1024;
-		rctl &= ~E1000_RCTL_BSEX;
-		break;
 	case 2048:
 	default:
 		rctl |= E1000_RCTL_SZ_2048;
@@ -3781,7 +3786,7 @@
 		                                         0, IPPROTO_TCP, 0);
 		cmd_length = E1000_TXD_CMD_IP;
 		ipcse = skb_transport_offset(skb) - 1;
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 		                                       &ipv6_hdr(skb)->daddr,
@@ -3962,13 +3967,13 @@
 dma_error:
 	dev_err(&pdev->dev, "TX DMA map failed\n");
 	buffer_info->dma = 0;
-	count--;
-
-	while (count >= 0) {
+	if (count)
 		count--;
-		i--;
-		if (i < 0)
+
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		e1000_put_txbuf(adapter, buffer_info);;
 	}
@@ -4317,13 +4322,7 @@
 	 * fragmented skbs
 	 */
 
-	if (max_frame <= 256)
-		adapter->rx_buffer_len = 256;
-	else if (max_frame <= 512)
-		adapter->rx_buffer_len = 512;
-	else if (max_frame <= 1024)
-		adapter->rx_buffer_len = 1024;
-	else if (max_frame <= 2048)
+	if (max_frame <= 2048)
 		adapter->rx_buffer_len = 2048;
 	else
 		adapter->rx_buffer_len = 4096;
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 55a2c0a..7f3ceb9 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -152,32 +152,9 @@
 		if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
 			goto out;
 
-		/*
-		 * If the PHY ID is still unknown, we may have an 82577
-		 * without link.  We will try again after setting Slow MDIC
-		 * mode. No harm in trying again in this case since the PHY
-		 * ID is unknown at this point anyway.
-		 */
-		ret_val = phy->ops.acquire(hw);
-		if (ret_val)
-			goto out;
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
-		if (ret_val)
-			goto out;
-		phy->ops.release(hw);
-
 		retry_count++;
 	}
 out:
-	/* Revert to MDIO fast mode, if applicable */
-	if (retry_count) {
-		ret_val = phy->ops.acquire(hw);
-		if (ret_val)
-			return ret_val;
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
-		phy->ops.release(hw);
-	}
-
 	return ret_val;
 }
 
@@ -2791,38 +2768,6 @@
 }
 
 /**
- *  e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
- *  @hw:   pointer to the HW structure
- *  @slow: true for slow mode, false for normal mode
- *
- *  Assumes semaphore already acquired.
- **/
-s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
-{
-	s32 ret_val = 0;
-	u16 data = 0;
-
-	/* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
-	hw->phy.addr = 1;
-	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
-				         (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
-	                                   (0x2180 | (slow << 10)));
-	if (ret_val)
-		goto out;
-
-	/* dummy read when reverting to fast mode - throw away result */
-	if (!slow)
-		ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
-
-out:
-	return ret_val;
-}
-
-/**
  *  __e1000_read_phy_reg_hv -  Read HV PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
@@ -2839,7 +2784,6 @@
 	s32 ret_val;
 	u16 page = BM_PHY_REG_PAGE(offset);
 	u16 reg = BM_PHY_REG_NUM(offset);
-	bool in_slow_mode = false;
 
 	if (!locked) {
 		ret_val = hw->phy.ops.acquire(hw);
@@ -2847,16 +2791,6 @@
 			return ret_val;
 	}
 
-	/* Workaround failure in MDIO access while cable is disconnected */
-	if ((hw->phy.type == e1000_phy_82577) &&
-	    !(er32(STATUS) & E1000_STATUS_LU)) {
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
-		if (ret_val)
-			goto out;
-
-		in_slow_mode = true;
-	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -2893,10 +2827,6 @@
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
 	                                  data);
 out:
-	/* Revert to MDIO fast mode, if applicable */
-	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
 	if (!locked)
 		hw->phy.ops.release(hw);
 
@@ -2948,7 +2878,6 @@
 	s32 ret_val;
 	u16 page = BM_PHY_REG_PAGE(offset);
 	u16 reg = BM_PHY_REG_NUM(offset);
-	bool in_slow_mode = false;
 
 	if (!locked) {
 		ret_val = hw->phy.ops.acquire(hw);
@@ -2956,16 +2885,6 @@
 			return ret_val;
 	}
 
-	/* Workaround failure in MDIO access while cable is disconnected */
-	if ((hw->phy.type == e1000_phy_82577) &&
-	    !(er32(STATUS) & E1000_STATUS_LU)) {
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
-		if (ret_val)
-			goto out;
-
-		in_slow_mode = true;
-	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
@@ -3019,10 +2938,6 @@
 	                                  data);
 
 out:
-	/* Revert to MDIO fast mode, if applicable */
-	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
-
 	if (!locked)
 		hw->phy.ops.release(hw);
 
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 933c64f..c881347 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -421,6 +421,8 @@
 			msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
 		if (tx_queue > IGB_N0_QUEUE)
 			msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+		if (!adapter->msix_entries && msix_vector == 0)
+			msixbm |= E1000_EIMS_OTHER;
 		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
 		q_vector->eims_value = msixbm;
 		break;
@@ -877,7 +879,6 @@
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
-	struct e1000_hw *hw = &adapter->hw;
 	int err = 0;
 
 	if (adapter->msix_entries) {
@@ -909,20 +910,7 @@
 		igb_setup_all_tx_resources(adapter);
 		igb_setup_all_rx_resources(adapter);
 	} else {
-		switch (hw->mac.type) {
-		case e1000_82575:
-			wr32(E1000_MSIXBM(0),
-			     (E1000_EICR_RX_QUEUE0 |
-			      E1000_EICR_TX_QUEUE0 |
-			      E1000_EIMS_OTHER));
-			break;
-		case e1000_82580:
-		case e1000_82576:
-			wr32(E1000_IVAR0, E1000_IVAR_VALID);
-			break;
-		default:
-			break;
-		}
+		igb_assign_vector(adapter->q_vector[0], 0);
 	}
 
 	if (adapter->flags & IGB_FLAG_HAS_MSI) {
@@ -1140,6 +1128,8 @@
 	}
 	if (adapter->msix_entries)
 		igb_configure_msix(adapter);
+	else
+		igb_assign_vector(adapter->q_vector[0], 0);
 
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
@@ -3422,7 +3412,7 @@
 							 iph->daddr, 0,
 							 IPPROTO_TCP,
 							 0);
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 						       &ipv6_hdr(skb)->daddr,
@@ -3584,6 +3574,7 @@
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
 
+		count++;
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
@@ -3605,7 +3596,6 @@
 		if (pci_dma_mapping_error(pdev, buffer_info->dma))
 			goto dma_error;
 
-		count++;
 	}
 
 	tx_ring->buffer_info[i].skb = skb;
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 0dbd032..2aa71a7 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -1963,7 +1963,7 @@
 		                                         iph->daddr, 0,
 		                                         IPPROTO_TCP,
 		                                         0);
-	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+	} else if (skb_is_gso_v6(skb)) {
 		ipv6_hdr(skb)->payload_len = 0;
 		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 		                                       &ipv6_hdr(skb)->daddr,
@@ -2117,6 +2117,7 @@
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
+	buffer_info->mapped_as_page = false;
 	buffer_info->dma = pci_map_single(pdev, skb->data, len,
 					  PCI_DMA_TODEVICE);
 	if (pci_dma_mapping_error(pdev, buffer_info->dma))
@@ -2126,6 +2127,7 @@
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
 
+		count++;
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
@@ -2146,7 +2148,6 @@
 						PCI_DMA_TODEVICE);
 		if (pci_dma_mapping_error(pdev, buffer_info->dma))
 			goto dma_error;
-		count++;
 	}
 
 	tx_ring->buffer_info[i].skb = skb;
@@ -2163,14 +2164,14 @@
 	buffer_info->length = 0;
 	buffer_info->next_to_watch = 0;
 	buffer_info->mapped_as_page = false;
-	count--;
+	if (count)
+		count--;
 
 	/* clear timestamp and dma mappings for remaining portion of packet */
-	while (count >= 0) {
-		count--;
-		i--;
-		if (i < 0)
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		igbvf_put_txbuf(adapter, buffer_info);
 	}
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index bcd0f01..593d1a4 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1363,13 +1363,13 @@
 dma_error:
 	dev_err(&pdev->dev, "TX DMA map failed\n");
 	buffer_info->dma = 0;
-	count--;
-
-	while (count >= 0) {
+	if (count)
 		count--;
-		i--;
-		if (i < 0)
+
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		buffer_info = &tx_ring->buffer_info[i];
 		ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
 	}
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index 21b41f4..bfef0eb 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -1,7 +1,7 @@
 ################################################################################
 #
 # Intel 10 Gigabit PCI Express Linux driver
-# Copyright(c) 1999 - 2009 Intel Corporation.
+# Copyright(c) 1999 - 2010 Intel Corporation.
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 8da8eb5..303e7bd 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 204177d..35a06b4758 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -357,12 +357,34 @@
 	u32 fctrl_reg;
 	u32 rmcs_reg;
 	u32 reg;
+	u32 link_speed = 0;
+	bool link_up;
 
 #ifdef CONFIG_DCB
 	if (hw->fc.requested_mode == ixgbe_fc_pfc)
 		goto out;
 
 #endif /* CONFIG_DCB */
+	/*
+	 * On 82598 having Rx FC on causes resets while doing 1G
+	 * so if it's on turn it off once we know link_speed. For
+	 * more details see 82598 Specification update.
+	 */
+	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+	if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+		switch (hw->fc.requested_mode) {
+		case ixgbe_fc_full:
+			hw->fc.requested_mode = ixgbe_fc_tx_pause;
+			break;
+		case ixgbe_fc_rx_pause:
+			hw->fc.requested_mode = ixgbe_fc_none;
+			break;
+		default:
+			/* no change */
+			break;
+		}
+	}
+
 	/* Negotiate the fc mode to use */
 	ret_val = ixgbe_fc_autoneg(hw);
 	if (ret_val)
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 5383405..b49bd6b 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 688b8ca..21f158f 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 27f3214..dfff0ff 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c
index a156228..9aea4f0 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/ixgbe_dcb.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h
index 64a9fa1..5caafd4 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.h
+++ b/drivers/net/ixgbe/ixgbe_dcb.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index f302638..f0e9279 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ixgbe/ixgbe_dcb_82598.h
index ebbe53c..cc728fa 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index ec8a252..4f7a26a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ixgbe/ixgbe_dcb_82599.h
index 9e5e282..0f3f791 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.h
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 3c7a79a..dd4883f 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -223,7 +223,7 @@
 
 	if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
 	    adapter->dcb_cfg.bw_percentage[0][bwg_id]) {
-		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_PG_TX;
 		adapter->dcb_set_bitmap |= BIT_RESETLINK;
 	}
 }
@@ -341,6 +341,12 @@
 	if (!adapter->dcb_set_bitmap)
 		return DCB_NO_HW_CHG;
 
+	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
+				 adapter->ring_feature[RING_F_DCB].indices);
+
+	if (ret)
+		return DCB_NO_HW_CHG;
+
 	/*
 	 * Only take down the adapter if the configuration change
 	 * requires a reset.
@@ -359,14 +365,6 @@
 		}
 	}
 
-	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
-				 adapter->ring_feature[RING_F_DCB].indices);
-	if (ret) {
-		if (adapter->dcb_set_bitmap & BIT_RESETLINK)
-			clear_bit(__IXGBE_RESETTING, &adapter->state);
-		return DCB_NO_HW_CHG;
-	}
-
 	if (adapter->dcb_cfg.pfc_mode_enable) {
 		if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
 			(adapter->hw.fc.current_mode != ixgbe_fc_pfc))
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0bd49d3..d77961f 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index da32a10..e9a20c8 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index de8ff53..abf4b2b 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 2ad754c..951b73c 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -52,7 +52,7 @@
 
 #define DRV_VERSION "2.0.44-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
-static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
+static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
 
 static const struct ixgbe_info *ixgbe_info_tbl[] = {
 	[board_82598] = &ixgbe_82598_info,
@@ -4928,7 +4928,7 @@
 			                                         iph->daddr, 0,
 			                                         IPPROTO_TCP,
 			                                         0);
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		} else if (skb_is_gso_v6(skb)) {
 			ipv6_hdr(skb)->payload_len = 0;
 			tcp_hdr(skb)->check =
 			    ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
@@ -5167,19 +5167,19 @@
 	tx_buffer_info->dma = 0;
 	tx_buffer_info->time_stamp = 0;
 	tx_buffer_info->next_to_watch = 0;
-	count--;
+	if (count)
+		count--;
 
 	/* clear timestamp and dma mappings for remaining portion of packet */
-	while (count >= 0) {
-		count--;
-		i--;
-		if (i < 0)
+	while (count--) {
+		if (i==0)
 			i += tx_ring->count;
+		i--;
 		tx_buffer_info = &tx_ring->tx_buffer_info[i];
 		ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
 	}
 
-	return count;
+	return 0;
 }
 
 static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
@@ -5329,8 +5329,11 @@
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	int txq = smp_processor_id();
 
-	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+		while (unlikely(txq >= dev->real_num_tx_queues))
+			txq -= dev->real_num_tx_queues;
 		return txq;
+	}
 
 #ifdef IXGBE_FCOE
 	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
@@ -5576,6 +5579,10 @@
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	int i;
 
+	/* if interface is down do nothing */
+	if (test_bit(__IXGBE_DOWN, &adapter->state))
+		return;
+
 	adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
 		int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
@@ -5756,6 +5763,10 @@
 	if (err)
 		goto err_sw_init;
 
+	/* Make it possible the adapter to be woken up via WOL */
+	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
 	/*
 	 * If there is a fan on this device and it has failed log the
 	 * failure.
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 9ecad17..1c1efd3 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index 9b700f5..9cf5f3b 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 84650c6..9eafddf 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 10 Gigabit PCI Express Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index c146304..c0ceebc 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -854,8 +854,8 @@
 
 static irqreturn_t ks_irq(int irq, void *pw)
 {
-	struct ks_net *ks = pw;
-	struct net_device *netdev = ks->netdev;
+	struct net_device *netdev = pw;
+	struct ks_net *ks = netdev_priv(netdev);
 	u16 status;
 
 	/*this should be the first in IRQ handler */
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 9f9d608..24279e6 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1941,7 +1941,7 @@
 		netif_wake_queue(adapter->netdev);
 
 		clear_bit(__NX_RESETTING, &adapter->state);
-
+		return;
 	} else {
 		clear_bit(__NX_RESETTING, &adapter->state);
 		if (!netxen_nic_reset_context(adapter)) {
@@ -2240,7 +2240,9 @@
 
 	netxen_nic_down(adapter, netdev);
 
+	rtnl_lock();
 	netxen_nic_detach(adapter);
+	rtnl_unlock();
 
 	status = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1);
 
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 813aca3..7b17404 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -717,6 +717,7 @@
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
 	PCMCIA_DEVICE_NULL,
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index b0e9f9c..0295097 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -410,7 +410,6 @@
 
 
 static void phy_change(struct work_struct *work);
-static void phy_state_machine(struct work_struct *work);
 
 /**
  * phy_start_machine - start PHY state machine tracking
@@ -430,7 +429,6 @@
 {
 	phydev->adjust_state = handler;
 
-	INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine);
 	schedule_delayed_work(&phydev->state_queue, HZ);
 }
 
@@ -761,7 +759,7 @@
  * phy_state_machine - Handle the state machine
  * @work: work_struct that describes the work to be done
  */
-static void phy_state_machine(struct work_struct *work)
+void phy_state_machine(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
 	struct phy_device *phydev =
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8212b2b..adbc0fd 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -177,6 +177,7 @@
 	dev->state = PHY_DOWN;
 
 	mutex_init(&dev->lock);
+	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
 
 	return dev;
 }
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 707b391..894a7c8 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -4119,7 +4119,7 @@
 	err = pcie_set_readrq(pdev, 4096);
 	if (err) {
 		dev_err(&pdev->dev, "Set readrq failed.\n");
-		goto err_out;
+		goto err_out1;
 	}
 
 	err = pci_request_regions(pdev, DRV_NAME);
@@ -4140,7 +4140,7 @@
 
 	if (err) {
 		dev_err(&pdev->dev, "No usable DMA configuration.\n");
-		goto err_out;
+		goto err_out2;
 	}
 
 	/* Set PCIe reset type for EEH to fundamental. */
@@ -4152,7 +4152,7 @@
 	if (!qdev->reg_base) {
 		dev_err(&pdev->dev, "Register mapping failed.\n");
 		err = -ENOMEM;
-		goto err_out;
+		goto err_out2;
 	}
 
 	qdev->doorbell_area_size = pci_resource_len(pdev, 3);
@@ -4162,14 +4162,14 @@
 	if (!qdev->doorbell_area) {
 		dev_err(&pdev->dev, "Doorbell register mapping failed.\n");
 		err = -ENOMEM;
-		goto err_out;
+		goto err_out2;
 	}
 
 	err = ql_get_board_info(qdev);
 	if (err) {
 		dev_err(&pdev->dev, "Register access failed.\n");
 		err = -EIO;
-		goto err_out;
+		goto err_out2;
 	}
 	qdev->msg_enable = netif_msg_init(debug, default_msg);
 	spin_lock_init(&qdev->hw_lock);
@@ -4179,7 +4179,7 @@
 	err = qdev->nic_ops->get_flash(qdev);
 	if (err) {
 		dev_err(&pdev->dev, "Invalid FLASH.\n");
-		goto err_out;
+		goto err_out2;
 	}
 
 	memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
@@ -4212,8 +4212,9 @@
 			 DRV_NAME, DRV_VERSION);
 	}
 	return 0;
-err_out:
+err_out2:
 	ql_release_all(pdev);
+err_out1:
 	pci_disable_device(pdev);
 	return err;
 }
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index cc42186..3c4836d 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3421,7 +3421,7 @@
 				break;
 			}
 		} else {
-			if (!(val64 & busy_bit)) {
+			if (val64 & busy_bit) {
 				ret = SUCCESS;
 				break;
 			}
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 103e8b0..46997e1 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -2284,6 +2284,7 @@
  fail2:
 	efx_fini_struct(efx);
  fail1:
+	WARN_ON(rc > 0);
 	EFX_LOG(efx, "initialisation failed. rc=%d\n", rc);
 	free_netdev(net_dev);
 	return rc;
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
index bf0b96a..5712fdd 100644
--- a/drivers/net/sfc/falcon_boards.c
+++ b/drivers/net/sfc/falcon_boards.c
@@ -29,6 +29,15 @@
 #define FALCON_BOARD_SFN4111T 0x51
 #define FALCON_BOARD_SFN4112F 0x52
 
+/* Board temperature is about 15°C above ambient when air flow is
+ * limited. */
+#define FALCON_BOARD_TEMP_BIAS	15
+
+/* SFC4000 datasheet says: 'The maximum permitted junction temperature
+ * is 125°C; the thermal design of the environment for the SFC4000
+ * should aim to keep this well below 100°C.' */
+#define FALCON_JUNC_TEMP_MAX	90
+
 /*****************************************************************************
  * Support for LM87 sensor chip used on several boards
  */
@@ -548,16 +557,16 @@
 static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
 
 static const u8 sfe4002_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
+	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
+	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
+	LM87_IN_LIMITS(3, 0xac, 0xd4),		/* 5V:    5.0V +/- 10% */
+	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
+	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
+	LM87_AIN_LIMITS(0, 0x98, 0xbb),		/* AIN1:  1.66V +/- 10% */
+	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
+	LM87_TEMP_INT_LIMITS(0, 80 + FALCON_BOARD_TEMP_BIAS),
+	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
 	0
 };
 
@@ -619,14 +628,14 @@
 static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
 
 static const u8 sfn4112f_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	LM87_IN_LIMITS(0, 0x7c, 0x99),		/* 2.5V:  1.8V +/- 10% */
+	LM87_IN_LIMITS(1, 0x4c, 0x5e),		/* Vccp1: 1.2V +/- 10% */
+	LM87_IN_LIMITS(2, 0xac, 0xd4),		/* 3.3V:  3.3V +/- 10% */
+	LM87_IN_LIMITS(4, 0xac, 0xe0),		/* 12V:   10.8-14V */
+	LM87_IN_LIMITS(5, 0x3f, 0x4f),		/* Vccp2: 1.0V +/- 10% */
+	LM87_AIN_LIMITS(1, 0x8a, 0xa9),		/* AIN2:  1.5V +/- 10% */
+	LM87_TEMP_INT_LIMITS(0, 60 + FALCON_BOARD_TEMP_BIAS),
+	LM87_TEMP_EXT1_LIMITS(0, FALCON_JUNC_TEMP_MAX),
 	0
 };
 
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 683353b..f66b3da 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -127,7 +127,7 @@
 	efx_dword_t reg;
 
 	/* Check for a reboot atomically with respect to efx_mcdi_copyout() */
-	rc = efx_mcdi_poll_reboot(efx);
+	rc = -efx_mcdi_poll_reboot(efx);
 	if (rc)
 		goto out;
 
@@ -142,8 +142,9 @@
 		if (spins != 0) {
 			--spins;
 			udelay(1);
-		} else
-			schedule();
+		} else {
+			schedule_timeout_uninterruptible(1);
+		}
 
 		time = get_seconds();
 
@@ -803,7 +804,7 @@
 			loff_t offset, u8 *buffer, size_t length)
 {
 	u8 inbuf[MC_CMD_NVRAM_READ_IN_LEN];
-	u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(length)];
+	u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
 	size_t outlen;
 	int rc;
 
@@ -827,7 +828,7 @@
 int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
 			   loff_t offset, const u8 *buffer, size_t length)
 {
-	u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(length)];
+	u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(EFX_MCDI_NVRAM_LEN_MAX)];
 	int rc;
 
 	MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_TYPE, type);
@@ -837,7 +838,8 @@
 
 	BUILD_BUG_ON(MC_CMD_NVRAM_WRITE_OUT_LEN != 0);
 
-	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf, sizeof(inbuf),
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf,
+			  ALIGN(MC_CMD_NVRAM_WRITE_IN_LEN(length), 4),
 			  NULL, 0, NULL);
 	if (rc)
 		goto fail;
diff --git a/drivers/net/sfc/mcdi.h b/drivers/net/sfc/mcdi.h
index de91672..10ce98f 100644
--- a/drivers/net/sfc/mcdi.h
+++ b/drivers/net/sfc/mcdi.h
@@ -111,6 +111,7 @@
 extern int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
 				loff_t offset, const u8 *buffer,
 				size_t length);
+#define EFX_MCDI_NVRAM_LEN_MAX 128
 extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type,
 				loff_t offset, size_t length);
 extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx,
diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h
index 2a85360..73e71f4 100644
--- a/drivers/net/sfc/mcdi_pcol.h
+++ b/drivers/net/sfc/mcdi_pcol.h
@@ -1090,8 +1090,10 @@
 #define MC_CMD_MAC_RX_LANES01_DISP_ERR 57
 #define MC_CMD_MAC_RX_LANES23_DISP_ERR 58
 #define MC_CMD_MAC_RX_MATCH_FAULT 59
+#define MC_CMD_GMAC_DMABUF_START 64
+#define MC_CMD_GMAC_DMABUF_END   95
 /* Insert new members here. */
-#define MC_CMD_MAC_GENERATION_END 60
+#define MC_CMD_MAC_GENERATION_END 96
 #define MC_CMD_MAC_NSTATS (MC_CMD_MAC_GENERATION_END+1)
 
 /* MC_CMD_MAC_STATS:
diff --git a/drivers/net/sfc/mtd.c b/drivers/net/sfc/mtd.c
index 3a46452..407bbad 100644
--- a/drivers/net/sfc/mtd.c
+++ b/drivers/net/sfc/mtd.c
@@ -23,7 +23,6 @@
 #include "mcdi_pcol.h"
 
 #define EFX_SPI_VERIFY_BUF_LEN 16
-#define EFX_MCDI_CHUNK_LEN 128
 
 struct efx_mtd_partition {
 	struct mtd_info mtd;
@@ -428,7 +427,7 @@
 	int rc = 0;
 
 	while (offset < end) {
-		chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+		chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
 		rc = efx_mcdi_nvram_read(efx, part->mcdi.nvram_type, offset,
 					 buffer, chunk);
 		if (rc)
@@ -491,7 +490,7 @@
 	}
 
 	while (offset < end) {
-		chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+		chunk = min_t(size_t, end - offset, EFX_MCDI_NVRAM_LEN_MAX);
 		rc = efx_mcdi_nvram_write(efx, part->mcdi.nvram_type, offset,
 					  buffer, chunk);
 		if (rc)
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index ff8f0a4..67eec7a 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -318,15 +318,9 @@
 	/* Wait 250ms for the PHY to complete bootup */
 	msleep(250);
 
-	/* Check that all the MMDs we expect are present and responding. We
-	 * expect faults on some if the link is down, but not on the PHY XS */
-	rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
-	if (rc < 0)
-		goto fail;
-
 	falcon_board(efx)->type->init_phy(efx);
 
-	return rc;
+	return 0;
 
  fail:
 	EFX_ERR(efx, "PHY reset timed out\n");
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index af39335..250c882 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -79,10 +79,14 @@
 static int efx_test_mdio(struct efx_nic *efx, struct efx_self_tests *tests)
 {
 	int rc = 0;
-	int devad = __ffs(efx->mdio.mmds);
+	int devad;
 	u16 physid1, physid2;
 
-	if (efx->phy_type == PHY_TYPE_NONE)
+	if (efx->mdio.mode_support & MDIO_SUPPORTS_C45)
+		devad = __ffs(efx->mdio.mmds);
+	else if (efx->mdio.mode_support & MDIO_SUPPORTS_C22)
+		devad = MDIO_DEVAD_NONE;
+	else
 		return 0;
 
 	mutex_lock(&efx->mac_lock);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 37f486b..67249c3 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -644,6 +644,7 @@
 {
 	u32 reg1;
 
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	reg1 &= ~phy_power[port];
 
@@ -651,6 +652,7 @@
 		reg1 |= coma_mode[port];
 
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	sky2_pci_read32(hw, PCI_DEV_REG1);
 
 	if (hw->chip_id == CHIP_ID_YUKON_FE)
@@ -707,9 +709,11 @@
 		gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
 	}
 
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	reg1 |= phy_power[port];		/* set PHY to PowerDown/COMA Mode */
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 }
 
 /* Force a renegotiation */
@@ -1021,11 +1025,8 @@
 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
 {
 	struct sky2_tx_le *le = sky2->tx_le + *slot;
-	struct tx_ring_info *re = sky2->tx_ring + *slot;
 
 	*slot = RING_NEXT(*slot, sky2->tx_ring_size);
-	re->flags = 0;
-	re->skb = NULL;
 	le->ctrl = 0;
 	return le;
 }
@@ -1618,8 +1619,7 @@
 	return count;
 }
 
-static void sky2_tx_unmap(struct pci_dev *pdev,
-			  const struct tx_ring_info *re)
+static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
 {
 	if (re->flags & TX_MAP_SINGLE)
 		pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
@@ -1629,6 +1629,7 @@
 		pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
 			       pci_unmap_len(re, maplen),
 			       PCI_DMA_TODEVICE);
+	re->flags = 0;
 }
 
 /*
@@ -1835,6 +1836,7 @@
 			dev->stats.tx_packets++;
 			dev->stats.tx_bytes += skb->len;
 
+			re->skb = NULL;
 			dev_kfree_skb_any(skb);
 
 			sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
@@ -2149,7 +2151,9 @@
 
 	/* reset PHY Link Detect */
 	phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 	sky2_link_up(sky2);
 }
@@ -2640,6 +2644,7 @@
 	if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
 		u16 pci_err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		pci_err = sky2_pci_read16(hw, PCI_STATUS);
 		if (net_ratelimit())
 			dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2647,12 +2652,14 @@
 
 		sky2_pci_write16(hw, PCI_STATUS,
 				      pci_err | PCI_STATUS_ERROR_BITS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
 		u32 err;
 
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
 			     0xfffffffful);
@@ -2660,6 +2667,7 @@
 			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 
 		sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -3038,6 +3046,7 @@
 	}
 
 	sky2_power_on(hw);
+	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 	for (i = 0; i < hw->ports; i++) {
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
@@ -3074,6 +3083,7 @@
 		reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
 
 		/* reset PHY Link Detect */
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		sky2_pci_write16(hw, PSM_CONFIG_REG4,
 				 reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
 		sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
@@ -3091,6 +3101,7 @@
 			/* restore the PCIe Link Control register */
 			sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
 		}
+		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
 		/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
 		sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
@@ -3228,6 +3239,27 @@
 	return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
 }
 
+static void sky2_hw_set_wol(struct sky2_hw *hw)
+{
+	int wol = 0;
+	int i;
+
+	for (i = 0; i < hw->ports; i++) {
+		struct net_device *dev = hw->dev[i];
+		struct sky2_port *sky2 = netdev_priv(dev);
+
+		if (sky2->wol)
+			wol = 1;
+	}
+
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
+	    hw->chip_id == CHIP_ID_YUKON_EX ||
+	    hw->chip_id == CHIP_ID_YUKON_FE_P)
+		sky2_write32(hw, B0_CTST, wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+
+	device_set_wakeup_enable(&hw->pdev->dev, wol);
+}
+
 static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	const struct sky2_port *sky2 = netdev_priv(dev);
@@ -3247,13 +3279,7 @@
 
 	sky2->wol = wol->wolopts;
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
-	    hw->chip_id == CHIP_ID_YUKON_EX ||
-	    hw->chip_id == CHIP_ID_YUKON_FE_P)
-		sky2_write32(hw, B0_CTST, sky2->wol
-			     ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
-
-	device_set_wakeup_enable(&hw->pdev->dev, sky2->wol);
+	sky2_hw_set_wol(hw);
 
 	if (!netif_running(dev))
 		sky2_wol_init(sky2);
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 95db60a..f952113 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1063,7 +1063,7 @@
 	if (retval) {
 		printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
 		       FIRMWARE_RX);
-		return retval;
+		goto out_init;
 	}
 	if (fw_rx->size % 4) {
 		printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
@@ -1108,6 +1108,9 @@
 	release_firmware(fw_tx);
 out_rx:
 	release_firmware(fw_rx);
+out_init:
+	if (retval)
+		netdev_close(dev);
 	return retval;
 }
 
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 75a669d..d71c197 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -1437,7 +1437,6 @@
 		/* Transmit complete. */
 		lp->lstats.tx_ints++;
 		tc35815_txdone(dev);
-		netif_wake_queue(dev);
 		if (ret < 0)
 			ret = 0;
 	}
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3a74d21..7f82b02 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
  * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com)
  * Copyright (C) 2004 Sun Microsystems Inc.
- * Copyright (C) 2005-2009 Broadcom Corporation.
+ * Copyright (C) 2005-2010 Broadcom Corporation.
  *
  * Firmware is:
  *	Derived from proprietary unpublished source code,
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.105"
-#define DRV_MODULE_RELDATE	"December 2, 2009"
+#define DRV_MODULE_VERSION	"3.106"
+#define DRV_MODULE_RELDATE	"January 12, 2010"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -1037,7 +1037,11 @@
 		else
 			tp->phy_addr = 1;
 
-		is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+		if (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0)
+			is_serdes = tr32(SG_DIG_STATUS) & SG_DIG_IS_SERDES;
+		else
+			is_serdes = tr32(TG3_CPMU_PHY_STRAP) &
+				    TG3_CPMU_PHY_STRAP_IS_SERDES;
 		if (is_serdes)
 			tp->phy_addr += 7;
 	} else
@@ -4693,8 +4697,9 @@
 		(*post_ptr)++;
 
 		if (unlikely(rx_std_posted >= tp->rx_std_max_post)) {
-			u32 idx = *post_ptr % TG3_RX_RING_SIZE;
-			tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx);
+			tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
+			tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG,
+				     tpr->rx_std_prod_idx);
 			work_mask &= ~RXD_OPAQUE_RING_STD;
 			rx_std_posted = 0;
 		}
@@ -7742,7 +7747,7 @@
 	     ((u64) tpr->rx_std_mapping >> 32));
 	tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
 	     ((u64) tpr->rx_std_mapping & 0xffffffff));
-	if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
 		tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
 		     NIC_SRAM_RX_BUFFER_DESC);
 
@@ -12122,7 +12127,8 @@
 
 		tp->phy_id = eeprom_phy_id;
 		if (eeprom_phy_serdes) {
-			if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+			if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
+			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
 				tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
 			else
 				tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
@@ -13384,6 +13390,11 @@
 	if (err)
 		return err;
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+	    (tp->pci_chip_rev_id != CHIPREV_ID_5717_A0 ||
+		 (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
+		return -ENOTSUPP;
+
 	/* Initialize data/descriptor byte/word swapping. */
 	val = tr32(GRC_MODE);
 	val &= GRC_MODE_HOST_STACKUP;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index cd30889..8a16791 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -4,6 +4,7 @@
  * Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
  * Copyright (C) 2001 Jeff Garzik (jgarzik@pobox.com)
  * Copyright (C) 2004 Sun Microsystems Inc.
+ * Copyright (C) 2007-2010 Broadcom Corporation.
  */
 
 #ifndef _T3_H
@@ -1054,6 +1055,8 @@
 #define  CPMU_MUTEX_REQ_DRIVER		 0x00001000
 #define TG3_CPMU_MUTEX_GNT		0x00003660
 #define  CPMU_MUTEX_GNT_DRIVER		 0x00001000
+#define TG3_CPMU_PHY_STRAP		0x00003664
+#define TG3_CPMU_PHY_STRAP_IS_SERDES	 0x00000020
 /* 0x3664 --> 0x3800 unused */
 
 /* Mbuf cluster free registers */
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 595777d..20696b5 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -249,6 +249,7 @@
 	{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
 	{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
+	{ 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */
 	{ 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ } /* terminate list */
 };
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 96bdc0b..eb8fe7e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3279,13 +3279,12 @@
 		/* Handle the transmitted buffer and release */
 		/* the BD to be used with the current frame  */
 
-		if (bd == ugeth->txBd[txQ]) /* queue empty? */
+		skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
+		if (!skb)
 			break;
 
 		dev->stats.tx_packets++;
 
-		skb = ugeth->tx_skbuff[txQ][ugeth->skb_dirtytx[txQ]];
-
 		if (skb_queue_len(&ugeth->rx_recycle) < RX_BD_RING_LEN &&
 			     skb_recycle_check(skb,
 				    ugeth->ug_info->uf_info.max_rx_buf_length +
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 21e183a..5f3b9ea 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -419,7 +419,7 @@
 
 static const struct driver_info	cdc_info = {
 	.description =	"CDC Ethernet Device",
-	.flags =	FLAG_ETHER | FLAG_LINK_INTR,
+	.flags =	FLAG_ETHER,
 	// .check_connect = cdc_check_connect,
 	.bind =		cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
@@ -584,6 +584,11 @@
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 	.driver_info = (unsigned long) &mbm_info,
 }, {
+	/* Ericsson C3607w ver 2 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190b, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &mbm_info,
+}, {
 	/* Toshiba F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index c93f58f..317aa34 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1877,13 +1877,12 @@
 /**
  *	tx_srv		-	transmit interrupt service
  *	@vptr; Velocity
- *	@status:
  *
  *	Scan the queues looking for transmitted packets that
  *	we can complete and clean up. Update any statistics as
  *	necessary/
  */
-static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
+static int velocity_tx_srv(struct velocity_info *vptr)
 {
 	struct tx_desc *td;
 	int qnum;
@@ -2090,14 +2089,12 @@
 /**
  *	velocity_rx_srv		-	service RX interrupt
  *	@vptr: velocity
- *	@status: adapter status (unused)
  *
  *	Walk the receive ring of the velocity adapter and remove
  *	any received packets from the receive queue. Hand the ring
  *	slots back to the adapter for reuse.
  */
-static int velocity_rx_srv(struct velocity_info *vptr, int status,
-		int budget_left)
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
 {
 	struct net_device_stats *stats = &vptr->dev->stats;
 	int rd_curr = vptr->rx.curr;
@@ -2151,32 +2148,24 @@
 	struct velocity_info *vptr = container_of(napi,
 			struct velocity_info, napi);
 	unsigned int rx_done;
-	u32 isr_status;
+	unsigned long flags;
 
-	spin_lock(&vptr->lock);
-	isr_status = mac_read_isr(vptr->mac_regs);
-
-	/* Ack the interrupt */
-	mac_write_isr(vptr->mac_regs, isr_status);
-	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
-		velocity_error(vptr, isr_status);
-
+	spin_lock_irqsave(&vptr->lock, flags);
 	/*
 	 * Do rx and tx twice for performance (taken from the VIA
 	 * out-of-tree driver).
 	 */
-	rx_done = velocity_rx_srv(vptr, isr_status, budget / 2);
-	velocity_tx_srv(vptr, isr_status);
-	rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done);
-	velocity_tx_srv(vptr, isr_status);
-
-	spin_unlock(&vptr->lock);
+	rx_done = velocity_rx_srv(vptr, budget / 2);
+	velocity_tx_srv(vptr);
+	rx_done += velocity_rx_srv(vptr, budget - rx_done);
+	velocity_tx_srv(vptr);
 
 	/* If budget not fully consumed, exit the polling mode */
 	if (rx_done < budget) {
 		napi_complete(napi);
 		mac_enable_int(vptr->mac_regs);
 	}
+	spin_unlock_irqrestore(&vptr->lock, flags);
 
 	return rx_done;
 }
@@ -2206,10 +2195,17 @@
 		return IRQ_NONE;
 	}
 
+	/* Ack the interrupt */
+	mac_write_isr(vptr->mac_regs, isr_status);
+
 	if (likely(napi_schedule_prep(&vptr->napi))) {
 		mac_disable_int(vptr->mac_regs);
 		__napi_schedule(&vptr->napi);
 	}
+
+	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+		velocity_error(vptr, isr_status);
+
 	spin_unlock(&vptr->lock);
 
 	return IRQ_HANDLED;
@@ -3100,7 +3096,7 @@
 	velocity_init_registers(vptr, VELOCITY_INIT_WOL);
 	mac_disable_int(vptr->mac_regs);
 
-	velocity_tx_srv(vptr, 0);
+	velocity_tx_srv(vptr);
 
 	for (i = 0; i < vptr->tx.numq; i++) {
 		if (vptr->tx.used[i])
@@ -3344,6 +3340,7 @@
 {
 	struct velocity_info *vptr = netdev_priv(dev);
 	int max_us = 0x3f * 64;
+	unsigned long flags;
 
 	/* 6 bits of  */
 	if (ecmd->tx_coalesce_usecs > max_us)
@@ -3365,6 +3362,7 @@
 			ecmd->tx_coalesce_usecs);
 
 	/* Setup the interrupt suppression and queue timers */
+	spin_lock_irqsave(&vptr->lock, flags);
 	mac_disable_int(vptr->mac_regs);
 	setup_adaptive_interrupts(vptr);
 	setup_queue_timers(vptr);
@@ -3372,6 +3370,7 @@
 	mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
 	mac_clear_isr(vptr->mac_regs);
 	mac_enable_int(vptr->mac_regs);
+	spin_unlock_irqrestore(&vptr->lock, flags);
 
 	return 0;
 }
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c708ecc..9ead30b 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -395,8 +395,7 @@
 
 	vi = container_of(work, struct virtnet_info, refill.work);
 	napi_disable(&vi->napi);
-	try_fill_recv(vi, GFP_KERNEL);
-	still_empty = (vi->num == 0);
+	still_empty = !try_fill_recv(vi, GFP_KERNEL);
 	napi_enable(&vi->napi);
 
 	/* In theory, this can happen: if we don't get any buffers in
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 5cc0f27..2d7c96d 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -151,6 +151,7 @@
 
 	/* Device IDs */
 	USB_DEVICE_ID_I6050 = 0x0186,
+	USB_DEVICE_ID_I6050_2 = 0x0188,
 };
 
 
@@ -234,6 +235,7 @@
 	u8 rx_size_auto_shrink;
 
 	struct dentry *debugfs_dentry;
+	unsigned i6050:1;	/* 1 if this is a 6050 based SKU */
 };
 
 
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 3b48681..98f4f8c5 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -478,7 +478,16 @@
 	i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
 	i2400m->bus_bm_mac_addr_impaired = 0;
 
-	if (id->idProduct == USB_DEVICE_ID_I6050) {
+	switch (id->idProduct) {
+	case USB_DEVICE_ID_I6050:
+	case USB_DEVICE_ID_I6050_2:
+		i2400mu->i6050 = 1;
+		break;
+	default:
+		break;
+	}
+
+	if (i2400mu->i6050) {
 		i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
 		i2400mu->endpoint_cfg.bulk_out = 0;
 		i2400mu->endpoint_cfg.notification = 3;
@@ -719,6 +728,7 @@
 static
 struct usb_device_id i2400mu_id_table[] = {
 	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
+	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050_2) },
 	{ USB_DEVICE(0x8086, 0x0181) },
 	{ USB_DEVICE(0x8086, 0x1403) },
 	{ USB_DEVICE(0x8086, 0x1405) },
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 5d1c867..6a3f4da 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -97,7 +97,7 @@
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 	int ret;
 	u16 val;
-	u32 cksum, offset;
+	u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
 
 	/*
 	 * Read values from EEPROM and store them in the capability structure
@@ -116,12 +116,38 @@
 	 * Validate the checksum of the EEPROM date. There are some
 	 * devices with invalid EEPROMs.
 	 */
-	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+	AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+	if (val) {
+		eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+			   AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+		AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+		eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+		/*
+		 * Fail safe check to prevent stupid loops due
+		 * to busted EEPROMs. XXX: This value is likely too
+		 * big still, waiting on a better value.
+		 */
+		if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+			ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: "
+				  "%d (0x%04x) max expected: %d (0x%04x)\n",
+				  eep_max, eep_max,
+				  3 * AR5K_EEPROM_INFO_MAX,
+				  3 * AR5K_EEPROM_INFO_MAX);
+			return -EIO;
+		}
+	}
+
+	for (cksum = 0, offset = 0; offset < eep_max; offset++) {
 		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
 		cksum ^= val;
 	}
 	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
-		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM "
+			  "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+			  cksum, eep_max,
+			  eep_max == AR5K_EEPROM_INFO_MAX ?
+				"default size" : "custom size");
 		return -EIO;
 	}
 
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 0123f35..473a483 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -37,6 +37,14 @@
 #define AR5K_EEPROM_RFKILL_POLARITY_S	1
 
 #define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
+
+/* FLASH(EEPROM) Defines for AR531X chips */
+#define AR5K_EEPROM_SIZE_LOWER		0x1b /* size info -- lower */
+#define AR5K_EEPROM_SIZE_UPPER		0x1c /* size info -- upper */
+#define AR5K_EEPROM_SIZE_UPPER_MASK	0xfff0
+#define AR5K_EEPROM_SIZE_UPPER_SHIFT	4
+#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT	12
+
 #define AR5K_EEPROM_CHECKSUM		0x00c0	/* EEPROM checksum */
 #define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
 #define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 03a1106..5774cea 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -25,7 +25,7 @@
 
 config ATH9K_DEBUGFS
 	bool "Atheros ath9k debugging"
-	depends on ATH9K
+	depends on ATH9K && DEBUG_FS
 	---help---
 	  Say Y, if you need access to ath9k's statistics for
 	  interrupts, rate control, etc.
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index e2cef2f..1597a42 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -33,11 +33,11 @@
 
 /* Macro to expand scalars to 64-bit objects */
 
-#define	ito64(x) (sizeof(x) == 8) ?			\
+#define	ito64(x) (sizeof(x) == 1) ?			\
 	(((unsigned long long int)(x)) & (0xff)) :	\
-	(sizeof(x) == 16) ?				\
+	(sizeof(x) == 2) ?				\
 	(((unsigned long long int)(x)) & 0xffff) :	\
-	((sizeof(x) == 32) ?				\
+	((sizeof(x) == 4) ?				\
 	 (((unsigned long long int)(x)) & 0xffffffff) : \
 	 (unsigned long long int)(x))
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 2ec61f0..ae37144 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -855,12 +855,11 @@
 	}
 }
 
-static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah)
+static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah)
 {
 	u32 i, j;
 
-	if ((ah->hw_version.devid == AR9280_DEVID_PCI) &&
-	    test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) {
+	if (ah->hw_version.devid == AR9280_DEVID_PCI) {
 
 		/* EEPROM Fixup */
 		for (i = 0; i < ah->iniModes.ia_rows; i++) {
@@ -980,7 +979,7 @@
 	if (r)
 		return r;
 
-	ath9k_hw_init_11a_eeprom_fix(ah);
+	ath9k_hw_init_eeprom_fix(ah);
 
 	r = ath9k_hw_init_macaddr(ah);
 	if (r) {
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 996eb90..643bea3 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2655,10 +2655,10 @@
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
 		ath9k_ps_wakeup(sc);
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-		ath_beacon_return(sc, avp);
 		ath9k_ps_restore(sc);
 	}
 
+	ath_beacon_return(sc, avp);
 	sc->sc_flags &= ~SC_OP_BEACONS;
 
 	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fa12b90..29bf336 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1615,7 +1615,7 @@
 		bf->bf_frmlen -= padsize;
 	}
 
-	if (conf_is_ht(&hw->conf) && !is_pae(skb))
+	if (conf_is_ht(&hw->conf))
 		bf->bf_state.bf_type |= BUF_HT;
 
 	bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
@@ -1701,7 +1701,7 @@
 			goto tx_done;
 		}
 
-		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+		if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) {
 			/*
 			 * Try aggregation if it's a unicast data frame
 			 * and the destination is HT capable.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fe3bf94..c484cc2 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -115,6 +115,7 @@
 #define B43_MMIO_TSF_2			0x636	/* core rev < 3 only */
 #define B43_MMIO_TSF_3			0x638	/* core rev < 3 only */
 #define B43_MMIO_RNG			0x65A
+#define B43_MMIO_IFSSLOT		0x684	/* Interframe slot time */
 #define B43_MMIO_IFSCTL			0x688 /* Interframe space control */
 #define  B43_MMIO_IFSCTL_USE_EDCF	0x0004
 #define B43_MMIO_POWERUP_DELAY		0x6A8
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4c41cfe..490fb45d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -628,10 +628,17 @@
 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 {
 	/* slot_time is in usec. */
-	if (dev->phy.type != B43_PHYTYPE_G)
+	/* This test used to exit for all but a G PHY. */
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
 		return;
-	b43_write16(dev, 0x684, 510 + slot_time);
-	b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
+	/* Shared memory location 0x0010 is the slot time and should be
+	 * set to slot_time; however, this register is initially 0 and changing
+	 * the value adversely affects the transmit rate for BCM4311
+	 * devices. Until this behavior is unterstood, delete this step
+	 *
+	 * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	 */
 }
 
 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 484c5fd..3146281 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -1961,7 +1961,7 @@
 	struct ieee80211_tx_info *info;
 	struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
 	u32  status = le32_to_cpu(tx_resp->u.status);
-	int tid = MAX_TID_COUNT;
+	int uninitialized_var(tid);
 	int sta_id;
 	int freed;
 	u8 *qc = NULL;
@@ -2008,7 +2008,7 @@
 			IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
 					   "%d index %d\n", scd_ssn , index);
 			freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 33a5866..cffaae7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1125,7 +1125,7 @@
 					scd_ssn , index, txq_id, txq->swq_id);
 
 			freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
@@ -1153,16 +1153,14 @@
 				   tx_resp->failure_frame);
 
 		freed = iwl_tx_queue_reclaim(priv, txq_id, index);
-		if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
-			priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+		iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
 			iwl_wake_queue(priv, txq_id);
 	}
 
-	if (ieee80211_is_data_qos(tx_resp->frame_ctrl))
-		iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+	iwl_txq_check_empty(priv, sta_id, tid, txq_id);
 
 	if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
 		IWL_ERR(priv, "TODO:  Implement Tx ABORT REQUIRED!!!\n");
@@ -1598,6 +1596,7 @@
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
@@ -1622,6 +1621,7 @@
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
@@ -1667,6 +1667,7 @@
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
@@ -1691,6 +1692,7 @@
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
@@ -1715,6 +1717,7 @@
 	.use_bsm = false,
 	.ht_greenfield_support = true,
 	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 574d366..f36f804 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2344,6 +2344,21 @@
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
+static inline void iwl_set_no_assoc(struct iwl_priv *priv)
+{
+	priv->assoc_id = 0;
+	iwl_led_disassociate(priv);
+	/*
+	 * inform the ucode that there is no longer an
+	 * association and that no more packets should be
+	 * sent
+	 */
+	priv->staging_rxon.filter_flags &=
+		~RXON_FILTER_ASSOC_MSK;
+	priv->staging_rxon.assoc_id = 0;
+	iwlcore_commit_rxon(priv);
+}
+
 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
 void iwl_bss_info_changed(struct ieee80211_hw *hw,
 			  struct ieee80211_vif *vif,
@@ -2475,20 +2490,8 @@
 					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
 			if (!iwl_is_rfkill(priv))
 				priv->cfg->ops->lib->post_associate(priv);
-		} else {
-			priv->assoc_id = 0;
-			iwl_led_disassociate(priv);
-
-			/*
-			 * inform the ucode that there is no longer an
-			 * association and that no more packets should be
-			 * send
-			 */
-			priv->staging_rxon.filter_flags &=
-				~RXON_FILTER_ASSOC_MSK;
-			priv->staging_rxon.assoc_id = 0;
-			iwlcore_commit_rxon(priv);
-		}
+		} else
+			iwl_set_no_assoc(priv);
 	}
 
 	if (changes && iwl_is_associated(priv) && priv->assoc_id) {
@@ -2503,12 +2506,14 @@
 		}
 	}
 
-	if ((changes & BSS_CHANGED_BEACON_ENABLED) &&
-	    vif->bss_conf.enable_beacon) {
-		memcpy(priv->staging_rxon.bssid_addr,
-		       bss_conf->bssid, ETH_ALEN);
-		memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-		iwlcore_config_ap(priv);
+	if (changes & BSS_CHANGED_BEACON_ENABLED) {
+		if (vif->bss_conf.enable_beacon) {
+			memcpy(priv->staging_rxon.bssid_addr,
+			       bss_conf->bssid, ETH_ALEN);
+			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+			iwlcore_config_ap(priv);
+		} else
+			iwl_set_no_assoc(priv);
 	}
 
 	mutex_unlock(&priv->mutex);
@@ -2740,6 +2745,7 @@
 			priv->staging_rxon.flags = 0;
 
 		iwl_set_rxon_channel(priv, conf->channel);
+		iwl_set_rxon_ht(priv, ht_conf);
 
 		iwl_set_flags_for_band(priv, conf->channel->band);
 		spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 27ca859..b69e972 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -446,6 +446,8 @@
 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 			 struct iwl_tx_queue *txq);
 int iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+			    int sta_id, int tid, int freed);
 int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 		      int slots_num, u32 txq_id);
 void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 165d1f6..3822cf5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -711,7 +711,7 @@
 extern int iwl_queue_space(const struct iwl_queue *q);
 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
 {
-	return q->write_ptr > q->read_ptr ?
+	return q->write_ptr >= q->read_ptr ?
 		(i >= q->read_ptr && i < q->write_ptr) :
 		!(i < q->read_ptr && i >= q->write_ptr);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
index e7d88d1..83cc4e5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.c
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
@@ -1,3 +1,29 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
 #include <linux/module.h>
 
 /* sparse doesn't like tracepoint macros */
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
index 2136196..d9c7363 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -1,3 +1,29 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
 #if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ)
 #define __IWLWIFI_DEVICE_TRACE
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 6f36b6e..2dbce85 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -928,7 +928,10 @@
 	if (ieee80211_is_mgmt(fc) ||
 	    ieee80211_has_protected(fc) ||
 	    ieee80211_has_morefrags(fc) ||
-	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG ||
+	    (ieee80211_is_data_qos(fc) &&
+	     *ieee80211_get_qos_ctl(hdr) &
+	     IEEE80211_QOS_CONTROL_A_MSDU_PRESENT))
 		ret = skb_linearize(skb);
 	else
 		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index cde09a8..90fbdb2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -297,7 +297,7 @@
 }
 EXPORT_SYMBOL(iwl_add_station);
 
-static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr)
+static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr)
 {
 	unsigned long flags;
 	u8 sta_id = iwl_find_station(priv, addr);
@@ -324,7 +324,7 @@
 {
 	struct iwl_rem_sta_cmd *rm_sta =
 			(struct iwl_rem_sta_cmd *)cmd->cmd.payload;
-	const char *addr = rm_sta->addr;
+	const u8 *addr = rm_sta->addr;
 
 	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 87ce2bd..8f40715 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -120,6 +120,20 @@
 EXPORT_SYMBOL(iwl_txq_update_write_ptr);
 
 
+void iwl_free_tfds_in_queue(struct iwl_priv *priv,
+			    int sta_id, int tid, int freed)
+{
+	if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
+		priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+	else {
+		IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n",
+			priv->stations[sta_id].tid[tid].tfds_in_queue,
+			freed);
+		priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
+	}
+}
+EXPORT_SYMBOL(iwl_free_tfds_in_queue);
+
 /**
  * iwl_tx_queue_free - Deallocate DMA queue.
  * @txq: Transmit queue to deallocate.
@@ -1131,6 +1145,7 @@
 	struct iwl_queue *q = &txq->q;
 	struct iwl_tx_info *tx_info;
 	int nfreed = 0;
+	struct ieee80211_hdr *hdr;
 
 	if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) {
 		IWL_ERR(priv, "Read index for DMA queue txq id (%d), index %d, "
@@ -1145,13 +1160,16 @@
 
 		tx_info = &txq->txb[txq->q.read_ptr];
 		iwl_tx_status(priv, tx_info->skb[0]);
+
+		hdr = (struct ieee80211_hdr *)tx_info->skb[0]->data;
+		if (hdr && ieee80211_is_data_qos(hdr->frame_control))
+			nfreed++;
 		tx_info->skb[0] = NULL;
 
 		if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
 			priv->cfg->ops->lib->txq_inval_byte_cnt_tbl(priv, txq);
 
 		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
-		nfreed++;
 	}
 	return nfreed;
 }
@@ -1559,7 +1577,7 @@
 	if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
 		/* calculate mac80211 ampdu sw queue to wake */
 		int freed = iwl_tx_queue_reclaim(priv, scd_flow, index);
-		priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+		iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 		    priv->mac80211_registered &&
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 777584d..1e41ad0 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -973,6 +973,10 @@
 
 	memset(&update, 0, sizeof(struct iwm_umac_pmkid_update));
 
+	update.hdr.oid = UMAC_WIFI_IF_CMD_PMKID_UPDATE;
+	update.hdr.buf_size = cpu_to_le16(sizeof(struct iwm_umac_pmkid_update) -
+					  sizeof(struct iwm_umac_wifi_if));
+
 	update.command = cpu_to_le32(command);
 	if (pmksa->bssid)
 		memcpy(&update.bssid, pmksa->bssid, ETH_ALEN);
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h
index 06af055..3dfd9f0 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.h
+++ b/drivers/net/wireless/iwmc3200wifi/commands.h
@@ -463,6 +463,7 @@
 #define IWM_CMD_PMKID_FLUSH 3
 
 struct iwm_umac_pmkid_update {
+	struct iwm_umac_wifi_if hdr;
 	__le32 command;
 	u8 bssid[ETH_ALEN];
 	__le16 reserved;
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 6d6ed74..f727b4a 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -794,7 +794,7 @@
 	}
 
 	bss->bss = kzalloc(bss_len, GFP_KERNEL);
-	if (!bss) {
+	if (!bss->bss) {
 		kfree(bss);
 		IWM_ERR(iwm, "Couldn't allocate bss\n");
 		return -ENOMEM;
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 59d4915..59f9210 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3157,8 +3157,10 @@
 	/* Clear unsupported feature flags */
 	*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
 
-	if (mwl8k_fw_lock(hw))
+	if (mwl8k_fw_lock(hw)) {
+		kfree(cmd);
 		return;
+	}
 
 	if (priv->sniffer_enabled) {
 		mwl8k_enable_sniffer(hw, 0);
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index a15962a..a72f7c2 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -197,6 +197,14 @@
 			i %= ring_limit;
 			continue;
 		}
+
+		if (unlikely(len > priv->common.rx_mtu)) {
+			if (net_ratelimit())
+				dev_err(&priv->pdev->dev, "rx'd frame size "
+					"exceeds length threshold.\n");
+
+			len = priv->common.rx_mtu;
+		}
 		skb_put(skb, len);
 
 		if (p54_rx(dev, skb)) {
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 27bf887..9deae41 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -340,7 +340,7 @@
 	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
 	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
 	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 3);
 	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
 	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
 	rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 4d841c0..dcfc8c2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -113,6 +113,12 @@
 	(  ((unsigned long)((__skb)->data + (__header))) & 3 )
 
 /*
+ * Constants for extra TX headroom for alignment purposes.
+ */
+#define RT2X00_ALIGN_SIZE	4 /* Only whole frame needs alignment */
+#define RT2X00_L2PAD_SIZE	8 /* Both header & payload need alignment */
+
+/*
  * Standard timing and size defines.
  * These values should follow the ieee80211 specifications.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 06c43ca..265e66d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -686,7 +686,17 @@
 	/*
 	 * Initialize extra TX headroom required.
 	 */
-	rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
+	rt2x00dev->hw->extra_tx_headroom =
+		max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+		      rt2x00dev->ops->extra_tx_headroom);
+
+	/*
+	 * Take TX headroom required for alignment into account.
+	 */
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+	else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
 
 	/*
 	 * Register HW.
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 239afc7..9915a09 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -104,7 +104,7 @@
 	 * is also mapped to the DMA so it can be used for transfering
 	 * additional descriptor information to the hardware.
 	 */
-	skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+	skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
 
 	skbdesc->skb_dma =
 	    dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
@@ -112,7 +112,7 @@
 	/*
 	 * Restore data pointer to original location again.
 	 */
-	skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+	skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
 
 	skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
 }
@@ -134,7 +134,7 @@
 		 * by the driver, but it was actually mapped to DMA.
 		 */
 		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
-				 skb->len + rt2x00dev->hw->extra_tx_headroom,
+				 skb->len + rt2x00dev->ops->extra_tx_headroom,
 				 DMA_TO_DEVICE);
 		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
 	}
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index bc5726d..7ba3052 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -65,6 +65,7 @@
 	/* Sitecom */
 	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+	{USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
 	/* Sphairon Access Systems GmbH */
 	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
 	/* Dick Smith Electronics */
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8ebf5c3..f14deb0 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -987,12 +987,13 @@
 	changed_flags &= SUPPORTED_FIF_FLAGS;
 	*new_flags &= SUPPORTED_FIF_FLAGS;
 
-	/* changed_flags is always populated but this driver
-	 * doesn't support all FIF flags so its possible we don't
-	 * need to do anything */
-	if (!changed_flags)
-		return;
-
+	/*
+	 * If multicast parameter (as returned by zd_op_prepare_multicast)
+	 * has changed, no bit in changed_flags is set. To handle this
+	 * situation, we do not return if changed_flags is 0. If we do so,
+	 * we will have some issue with IPv6 which uses multicast for link
+	 * layer address resolution.
+	 */
 	if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI))
 		zd_mc_add_all(&hash);
 
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index ac19ecd..72d3e43 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -62,6 +62,7 @@
 	{ USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
 	{ USB_DEVICE(0x0053, 0x5301), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x0409, 0x0248), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0411, 0x00da), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 8e952fd..cb2fd01 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -720,12 +720,6 @@
 			-ret_val);
 		goto acpiphp_bus_add_out;
 	}
-	/*
-	 * try to start anyway.  We could have failed to add
-	 * simply because this bus had previously been added
-	 * on another add.  Don't bother with the return value
-	 * we just keep going.
-	 */
 	ret_val = acpi_bus_start(device);
 
 acpiphp_bus_add_out:
diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
index 8c30a95..223052b 100644
--- a/drivers/pci/pcie/aer/aer_inject.c
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -321,7 +321,7 @@
 	unsigned long flags;
 	unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
 	int pos_cap_err, rp_pos_cap_err;
-	u32 sever, mask;
+	u32 sever, cor_mask, uncor_mask;
 	int ret = 0;
 
 	dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
@@ -339,6 +339,9 @@
 		goto out_put;
 	}
 	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask);
+	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK,
+			      &uncor_mask);
 
 	rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
 	if (!rp_pos_cap_err) {
@@ -374,17 +377,14 @@
 	err->header_log2 = einj->header_log2;
 	err->header_log3 = einj->header_log3;
 
-	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask);
-	if (einj->cor_status && !(einj->cor_status & ~mask)) {
+	if (einj->cor_status && !(einj->cor_status & ~cor_mask)) {
 		ret = -EINVAL;
 		printk(KERN_WARNING "The correctable error(s) is masked "
 				"by device\n");
 		spin_unlock_irqrestore(&inject_lock, flags);
 		goto out_put;
 	}
-
-	pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask);
-	if (einj->uncor_status && !(einj->uncor_status & ~mask)) {
+	if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) {
 		ret = -EINVAL;
 		printk(KERN_WARNING "The uncorrectable error(s) is masked "
 				"by device\n");
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 98ffb2d..446e4a9 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -681,7 +681,7 @@
 	dev->irq = irq;
 }
 
-static void set_pcie_port_type(struct pci_dev *pdev)
+void set_pcie_port_type(struct pci_dev *pdev)
 {
 	int pos;
 	u16 reg16;
@@ -695,7 +695,7 @@
 	pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
 }
 
-static void set_pcie_hotplug_bridge(struct pci_dev *pdev)
+void set_pcie_hotplug_bridge(struct pci_dev *pdev)
 {
 	int pos;
 	u16 reg16;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index c746943..d58b940 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -338,6 +338,23 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_868,		quirk_s3_64M);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_968,		quirk_s3_64M);
 
+/*
+ * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
+ * ver. 1.33  20070103) don't set the correct ISA PCI region header info.
+ * BAR0 should be 8 bytes; instead, it may be set to something like 8k
+ * (which conflicts w/ BAR1's memory range).
+ */
+static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
+{
+	if (pci_resource_len(dev, 0) != 8) {
+		struct resource *res = &dev->resource[0];
+		res->end = res->start + 8 - 1;
+		dev_info(&dev->dev, "CS5536 ISA bridge bug detected "
+				"(incorrect header); workaround applied.\n");
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
+
 static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
 	unsigned size, int nr, const char *name)
 {
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index db32c25..f526e73 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -364,6 +364,7 @@
 	select HWMON
 	select LEDS_CLASS
 	select NEW_LEDS
+	select INPUT_SPARSEKMAP
 	---help---
 	  This driver supports the Fn-Fx keys on Eee PC laptops.
 
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 07d14df..226b3e9 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -934,7 +934,7 @@
 	acer_backlight_device = bd;
 
 	bd->props.power = FB_BLANK_UNBLANK;
-	bd->props.brightness = max_brightness;
+	bd->props.brightness = read_brightness(bd);
 	bd->props.max_brightness = max_brightness;
 	backlight_update_status(bd);
 	return 0;
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 5838c69..e2be6bb 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -31,10 +31,12 @@
 #include <acpi/acpi_bus.h>
 #include <linux/uaccess.h>
 #include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
 #include <linux/rfkill.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/leds.h>
+#include <linux/dmi.h>
 
 #define EEEPC_LAPTOP_VERSION	"0.1"
 #define EEEPC_LAPTOP_NAME	"Eee PC Hotkey Driver"
@@ -48,6 +50,14 @@
 MODULE_DESCRIPTION(EEEPC_LAPTOP_NAME);
 MODULE_LICENSE("GPL");
 
+static bool hotplug_disabled;
+
+module_param(hotplug_disabled, bool, 0644);
+MODULE_PARM_DESC(hotplug_disabled,
+		 "Disable hotplug for wireless device. "
+		 "If your laptop need that, please report to "
+		 "acpi4asus-user@lists.sourceforge.net.");
+
 /*
  * Definitions for Asus EeePC
  */
@@ -120,38 +130,28 @@
 	NULL, NULL, "PBPS", "TPDS"
 };
 
-struct key_entry {
-	char type;
-	u8 code;
-	u16 keycode;
-};
-
-enum { KE_KEY, KE_END };
-
 static const struct key_entry eeepc_keymap[] = {
-	/* Sleep already handled via generic ACPI code */
-	{KE_KEY, 0x10, KEY_WLAN },
-	{KE_KEY, 0x11, KEY_WLAN },
-	{KE_KEY, 0x12, KEY_PROG1 },
-	{KE_KEY, 0x13, KEY_MUTE },
-	{KE_KEY, 0x14, KEY_VOLUMEDOWN },
-	{KE_KEY, 0x15, KEY_VOLUMEUP },
-	{KE_KEY, 0x16, KEY_DISPLAY_OFF },
-	{KE_KEY, 0x1a, KEY_COFFEE },
-	{KE_KEY, 0x1b, KEY_ZOOM },
-	{KE_KEY, 0x1c, KEY_PROG2 },
-	{KE_KEY, 0x1d, KEY_PROG3 },
-	{KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN },
-	{KE_KEY, NOTIFY_BRN_MAX, KEY_BRIGHTNESSUP },
-	{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
-	{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
-	{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
-	{KE_KEY, 0x37, KEY_F13 }, /* Disable Touchpad */
-	{KE_KEY, 0x38, KEY_F14 },
-	{KE_END, 0},
+	{ KE_KEY, 0x10, { KEY_WLAN } },
+	{ KE_KEY, 0x11, { KEY_WLAN } },
+	{ KE_KEY, 0x12, { KEY_PROG1 } },
+	{ KE_KEY, 0x13, { KEY_MUTE } },
+	{ KE_KEY, 0x14, { KEY_VOLUMEDOWN } },
+	{ KE_KEY, 0x15, { KEY_VOLUMEUP } },
+	{ KE_KEY, 0x16, { KEY_DISPLAY_OFF } },
+	{ KE_KEY, 0x1a, { KEY_COFFEE } },
+	{ KE_KEY, 0x1b, { KEY_ZOOM } },
+	{ KE_KEY, 0x1c, { KEY_PROG2 } },
+	{ KE_KEY, 0x1d, { KEY_PROG3 } },
+	{ KE_KEY, NOTIFY_BRN_MIN, { KEY_BRIGHTNESSDOWN } },
+	{ KE_KEY, NOTIFY_BRN_MAX, { KEY_BRIGHTNESSUP } },
+	{ KE_KEY, 0x30, { KEY_SWITCHVIDEOMODE } },
+	{ KE_KEY, 0x31, { KEY_SWITCHVIDEOMODE } },
+	{ KE_KEY, 0x32, { KEY_SWITCHVIDEOMODE } },
+	{ KE_KEY, 0x37, { KEY_F13 } }, /* Disable Touchpad */
+	{ KE_KEY, 0x38, { KEY_F14 } },
+	{ KE_END, 0 },
 };
 
-
 /*
  * This is the main structure, we can use it to store useful information
  */
@@ -159,6 +159,8 @@
 	acpi_handle handle;		/* the handle of the acpi device */
 	u32 cm_supported;		/* the control methods supported
 					   by this BIOS */
+	bool cpufv_disabled;
+	bool hotplug_disabled;
 	u16 event_count[128];		/* count for each event */
 
 	struct platform_device *platform_device;
@@ -378,6 +380,8 @@
 	struct eeepc_cpufv c;
 	int rv, value;
 
+	if (eeepc->cpufv_disabled)
+		return -EPERM;
 	if (get_cpufv(eeepc, &c))
 		return -ENODEV;
 	rv = parse_arg(buf, count, &value);
@@ -389,6 +393,41 @@
 	return rv;
 }
 
+static ssize_t show_cpufv_disabled(struct device *dev,
+			  struct device_attribute *attr,
+			  char *buf)
+{
+	struct eeepc_laptop *eeepc = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", eeepc->cpufv_disabled);
+}
+
+static ssize_t store_cpufv_disabled(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct eeepc_laptop *eeepc = dev_get_drvdata(dev);
+	int rv, value;
+
+	rv = parse_arg(buf, count, &value);
+	if (rv < 0)
+		return rv;
+
+	switch (value) {
+	case 0:
+		if (eeepc->cpufv_disabled)
+			pr_warning("cpufv enabled (not officially supported "
+				"on this model)\n");
+		eeepc->cpufv_disabled = false;
+		return rv;
+	case 1:
+		return -EPERM;
+	default:
+		return -EINVAL;
+	}
+}
+
+
 static struct device_attribute dev_attr_cpufv = {
 	.attr = {
 		.name = "cpufv",
@@ -404,12 +443,22 @@
 	.show   = show_available_cpufv
 };
 
+static struct device_attribute dev_attr_cpufv_disabled = {
+	.attr = {
+		.name = "cpufv_disabled",
+		.mode = 0644 },
+	.show   = show_cpufv_disabled,
+	.store  = store_cpufv_disabled
+};
+
+
 static struct attribute *platform_attributes[] = {
 	&dev_attr_camera.attr,
 	&dev_attr_cardr.attr,
 	&dev_attr_disp.attr,
 	&dev_attr_cpufv.attr,
 	&dev_attr_available_cpufv.attr,
+	&dev_attr_cpufv_disabled.attr,
 	NULL
 };
 
@@ -796,6 +845,9 @@
 	if (result && result != -ENODEV)
 		goto exit;
 
+	if (eeepc->hotplug_disabled)
+		return 0;
+
 	result = eeepc_setup_pci_hotplug(eeepc);
 	/*
 	 * If we get -EBUSY then something else is handling the PCI hotplug -
@@ -1090,120 +1142,42 @@
 /*
  * Input device (i.e. hotkeys)
  */
-static struct key_entry *eeepc_get_entry_by_scancode(
-	struct eeepc_laptop *eeepc,
-	int code)
-{
-	struct key_entry *key;
-
-	for (key = eeepc->keymap; key->type != KE_END; key++)
-		if (code == key->code)
-			return key;
-
-	return NULL;
-}
-
-static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event)
-{
-	static struct key_entry *key;
-
-	key = eeepc_get_entry_by_scancode(eeepc, event);
-	if (key) {
-		switch (key->type) {
-		case KE_KEY:
-			input_report_key(eeepc->inputdev, key->keycode,
-						1);
-			input_sync(eeepc->inputdev);
-			input_report_key(eeepc->inputdev, key->keycode,
-						0);
-			input_sync(eeepc->inputdev);
-			break;
-		}
-	}
-}
-
-static struct key_entry *eeepc_get_entry_by_keycode(
-	struct eeepc_laptop *eeepc, int code)
-{
-	struct key_entry *key;
-
-	for (key = eeepc->keymap; key->type != KE_END; key++)
-		if (code == key->keycode && key->type == KE_KEY)
-			return key;
-
-	return NULL;
-}
-
-static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode)
-{
-	struct eeepc_laptop *eeepc = input_get_drvdata(dev);
-	struct key_entry *key = eeepc_get_entry_by_scancode(eeepc, scancode);
-
-	if (key && key->type == KE_KEY) {
-		*keycode = key->keycode;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode)
-{
-	struct eeepc_laptop *eeepc = input_get_drvdata(dev);
-	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
-	key = eeepc_get_entry_by_scancode(eeepc, scancode);
-	if (key && key->type == KE_KEY) {
-		old_keycode = key->keycode;
-		key->keycode = keycode;
-		set_bit(keycode, dev->keybit);
-		if (!eeepc_get_entry_by_keycode(eeepc, old_keycode))
-			clear_bit(old_keycode, dev->keybit);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
 static int eeepc_input_init(struct eeepc_laptop *eeepc)
 {
-	const struct key_entry *key;
-	int result;
+	struct input_dev *input;
+	int error;
 
-	eeepc->inputdev = input_allocate_device();
-	if (!eeepc->inputdev) {
+	input = input_allocate_device();
+	if (!input) {
 		pr_info("Unable to allocate input device\n");
 		return -ENOMEM;
 	}
-	eeepc->inputdev->name = "Asus EeePC extra buttons";
-	eeepc->inputdev->dev.parent = &eeepc->platform_device->dev;
-	eeepc->inputdev->phys = EEEPC_LAPTOP_FILE "/input0";
-	eeepc->inputdev->id.bustype = BUS_HOST;
-	eeepc->inputdev->getkeycode = eeepc_getkeycode;
-	eeepc->inputdev->setkeycode = eeepc_setkeycode;
-	input_set_drvdata(eeepc->inputdev, eeepc);
 
-	eeepc->keymap = kmemdup(eeepc_keymap, sizeof(eeepc_keymap),
-				GFP_KERNEL);
-	for (key = eeepc_keymap; key->type != KE_END; key++) {
-		switch (key->type) {
-		case KE_KEY:
-			set_bit(EV_KEY, eeepc->inputdev->evbit);
-			set_bit(key->keycode, eeepc->inputdev->keybit);
-			break;
-		}
+	input->name = "Asus EeePC extra buttons";
+	input->phys = EEEPC_LAPTOP_FILE "/input0";
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = &eeepc->platform_device->dev;
+
+	error = sparse_keymap_setup(input, eeepc_keymap, NULL);
+	if (error) {
+		pr_err("Unable to setup input device keymap\n");
+		goto err_free_dev;
 	}
-	result = input_register_device(eeepc->inputdev);
-	if (result) {
-		pr_info("Unable to register input device\n");
-		input_free_device(eeepc->inputdev);
-		return result;
+
+	error = input_register_device(input);
+	if (error) {
+		pr_err("Unable to register input device\n");
+		goto err_free_keymap;
 	}
+
+	eeepc->inputdev = input;
 	return 0;
+
+ err_free_keymap:
+	sparse_keymap_free(input);
+ err_free_dev:
+	input_free_device(input);
+	return error;
 }
 
 static void eeepc_input_exit(struct eeepc_laptop *eeepc)
@@ -1253,11 +1227,59 @@
 				* event will be desired value (or else ignored)
 				*/
 			}
-			eeepc_input_notify(eeepc, event);
+			sparse_keymap_report_event(eeepc->inputdev, event,
+						   1, true);
 		}
 	} else {
 		/* Everything else is a bona-fide keypress event */
-		eeepc_input_notify(eeepc, event);
+		sparse_keymap_report_event(eeepc->inputdev, event, 1, true);
+	}
+}
+
+static void eeepc_dmi_check(struct eeepc_laptop *eeepc)
+{
+	const char *model;
+
+	model = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!model)
+		return;
+
+	/*
+	 * Blacklist for setting cpufv (cpu speed).
+	 *
+	 * EeePC 4G ("701") implements CFVS, but it is not supported
+	 * by the pre-installed OS, and the original option to change it
+	 * in the BIOS setup screen was removed in later versions.
+	 *
+	 * Judging by the lack of "Super Hybrid Engine" on Asus product pages,
+	 * this applies to all "701" models (4G/4G Surf/2G Surf).
+	 *
+	 * So Asus made a deliberate decision not to support it on this model.
+	 * We have several reports that using it can cause the system to hang
+	 *
+	 * The hang has also been reported on a "702" (Model name "8G"?).
+	 *
+	 * We avoid dmi_check_system() / dmi_match(), because they use
+	 * substring matching.  We don't want to affect the "701SD"
+	 * and "701SDX" models, because they do support S.H.E.
+	 */
+	if (strcmp(model, "701") == 0 || strcmp(model, "702") == 0) {
+		eeepc->cpufv_disabled = true;
+		pr_info("model %s does not officially support setting cpu "
+			"speed\n", model);
+		pr_info("cpufv disabled to avoid instability\n");
+	}
+
+	/*
+	 * Blacklist for wlan hotplug
+	 *
+	 * Eeepc 1005HA doesn't work like others models and don't need the
+	 * hotplug code. In fact, current hotplug code seems to unplug another
+	 * device...
+	 */
+	if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) {
+		eeepc->hotplug_disabled = true;
+		pr_info("wlan hotplug disabled\n");
 	}
 }
 
@@ -1342,6 +1364,10 @@
 	strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS);
 	device->driver_data = eeepc;
 
+	eeepc->hotplug_disabled = hotplug_disabled;
+
+	eeepc_dmi_check(eeepc);
+
 	result = eeepc_acpi_init(eeepc, device);
 	if (result)
 		goto fail_platform;
@@ -1452,10 +1478,12 @@
 	result = acpi_bus_register_driver(&eeepc_acpi_driver);
 	if (result < 0)
 		goto fail_acpi_driver;
+
 	if (!eeepc_device_present) {
 		result = -ENODEV;
 		goto fail_no_device;
 	}
+
 	return 0;
 
 fail_no_device:
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 5af5334..3f71a60 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1201,9 +1201,12 @@
 	/* the buffer is filled with magic numbers describing the devices
 	 * available, 0xff terminates the enumeration
 	 */
-	while ((dev_code = *(device_enum->buffer.pointer + i)) != 0xff &&
-			i < device_enum->buffer.length) {
-		i++;
+	for (i = 0; i < device_enum->buffer.length; i++) {
+
+		dev_code = *(device_enum->buffer.pointer + i);
+		if (dev_code == 0xff)
+			break;
+
 		dprintk("Radio devices, looking at 0x%.2x\n", dev_code);
 
 		if (dev_code == 0 && !sony_rfkill_devices[SONY_WIFI])
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e67e4fe..eb603f1d5 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5771,7 +5771,7 @@
 	case TPACPI_THERMAL_ACPI_TMP07:
 	case TPACPI_THERMAL_ACPI_UPDT:
 		sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
-				   &thermal_temp_input16_group);
+				   &thermal_temp_input8_group);
 		break;
 	case TPACPI_THERMAL_NONE:
 	default:
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index fa39e75..6ea3cb5 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -175,8 +175,14 @@
 		dev_err(&dev->dev, "Do not pass platform_data through "
 			"wm97xx_bat_set_pdata!\n");
 		return -EINVAL;
-	} else
-		pdata = wmdata->batt_pdata;
+	}
+
+	if (!wmdata) {
+		dev_err(&dev->dev, "No platform data supplied\n");
+		return -EINVAL;
+	}
+
+	pdata = wmdata->batt_pdata;
 
 	if (dev->id != -1)
 		return -EINVAL;
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 686ef27..b60a4c9 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -661,7 +661,7 @@
 static void print_constraints(struct regulator_dev *rdev)
 {
 	struct regulation_constraints *constraints = rdev->constraints;
-	char buf[80];
+	char buf[80] = "";
 	int count = 0;
 	int ret;
 
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 76d08c2..4f33a0f 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -183,7 +183,7 @@
 		if (vol_map[val] >= min_vol)
 			break;
 
-	if (vol_map[val] > max_vol)
+	if (val > LDO_VOL_MAX_IDX || vol_map[val] > max_vol)
 		return -EINVAL;
 
 	return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
@@ -272,7 +272,7 @@
 		if (vol_map[val] >= min_vol)
 			break;
 
-	if (vol_map[val] > max_vol)
+	if (val > BUCK_TARGET_VOL_MAX_IDX || vol_map[val] > max_vol)
 		return -EINVAL;
 
 	ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 1bbff09..e7b89e7 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1504,7 +1504,8 @@
 	led->isink_init.consumer_supplies = &led->isink_consumer;
 	led->isink_init.constraints.min_uA = 0;
 	led->isink_init.constraints.max_uA = pdata->max_uA;
-	led->isink_init.constraints.valid_ops_mask = REGULATOR_CHANGE_CURRENT;
+	led->isink_init.constraints.valid_ops_mask
+		= REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS;
 	led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
 	ret = wm8350_register_regulator(wm8350, isink, &led->isink_init);
 	if (ret != 0) {
@@ -1517,6 +1518,7 @@
 	led->dcdc_init.num_consumer_supplies = 1;
 	led->dcdc_init.consumer_supplies = &led->dcdc_consumer;
 	led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
+	led->dcdc_init.constraints.valid_ops_mask =  REGULATOR_CHANGE_STATUS;
 	ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init);
 	if (ret != 0) {
 		platform_device_put(pdev);
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
index 3a7be11..812c667 100644
--- a/drivers/rtc/rtc-fm3130.c
+++ b/drivers/rtc/rtc-fm3130.c
@@ -376,20 +376,22 @@
 	}
 
 	/* Disabling calibration mode */
-	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
 		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
 			fm3130->regs[FM3130_RTC_CONTROL] &
 				~(FM3130_RTC_CONTROL_BIT_CAL));
 		dev_warn(&client->dev, "Disabling calibration mode!\n");
+	}
 
 	/* Disabling read and write modes */
 	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
-	    fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
+	    fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) {
 		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
 			fm3130->regs[FM3130_RTC_CONTROL] &
 				~(FM3130_RTC_CONTROL_BIT_READ |
 					FM3130_RTC_CONTROL_BIT_WRITE));
 		dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+	}
 
 	/* oscillator off?  turn it on, so clock can tick. */
 	if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index fdb2e7c..5905936 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -1004,8 +1004,8 @@
 	if (device == NULL ||
 	    device != dasd_device_from_cdev_locked(cdev) ||
 	    strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) {
-		DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: "
-			      "bus_id %s", dev_name(&cdev->dev));
+		DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s",
+				"invalid device in request");
 		return;
 	}
 
@@ -1078,8 +1078,8 @@
 	device = (struct dasd_device *) cqr->startdev;
 	if (!device ||
 	    strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) {
-		DBF_DEV_EVENT(DBF_DEBUG, device, "invalid device in request: "
-			      "bus_id %s", dev_name(&cdev->dev));
+		DBF_EVENT_DEVID(DBF_DEBUG, cdev, "%s",
+				"invalid device in request");
 		return;
 	}
 
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 5819dc0..1cca21a 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -23,6 +23,7 @@
 #include <asm/debug.h>
 #include <asm/idals.h>
 #include <asm/ebcdic.h>
+#include <asm/compat.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/cio.h>
@@ -2844,13 +2845,16 @@
 	rc = -EFAULT;
 	if (copy_from_user(&usrparm, argp, sizeof(usrparm)))
 		goto out;
-#ifndef CONFIG_64BIT
-	/* Make sure pointers are sane even on 31 bit. */
-	if ((usrparm.psf_data >> 32) != 0 || (usrparm.rssd_result >> 32) != 0) {
+	if (is_compat_task() || sizeof(long) == 4) {
+		/* Make sure pointers are sane even on 31 bit. */
 		rc = -EINVAL;
-		goto out;
+		if ((usrparm.psf_data >> 32) != 0)
+			goto out;
+		if ((usrparm.rssd_result >> 32) != 0)
+			goto out;
+		usrparm.psf_data &= 0x7fffffffULL;
+		usrparm.rssd_result &= 0x7fffffffULL;
 	}
-#endif
 	/* alloc I/O data area */
 	psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA);
 	rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA);
@@ -3029,7 +3033,7 @@
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
 		       " in req: %p CS: 0x%02X DS: 0x%02X CC: 0x%02X RC: %d\n",
 		       req, scsw_cstat(&irb->scsw), scsw_dstat(&irb->scsw),
-		       scsw_cc(&irb->scsw), req->intrc);
+		       scsw_cc(&irb->scsw), req ? req->intrc : 0);
 	len += sprintf(page + len, KERN_ERR PRINTK_HEADER
 		       " device %s: Failing CCW: %p\n",
 		       dev_name(&device->cdev->dev),
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 478bcdb..7039d9c 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -17,7 +17,7 @@
 #include <linux/fs.h>
 #include <linux/blkpg.h>
 #include <linux/smp_lock.h>
-
+#include <asm/compat.h>
 #include <asm/ccwdev.h>
 #include <asm/cmb.h>
 #include <asm/uaccess.h>
@@ -260,7 +260,7 @@
 	struct ccw_dev_id dev_id;
 
 	base = block->base;
-	if (!base->discipline->fill_info)
+	if (!base->discipline || !base->discipline->fill_info)
 		return -EINVAL;
 
 	dasd_info = kzalloc(sizeof(struct dasd_information2_t), GFP_KERNEL);
@@ -303,10 +303,7 @@
 	dasd_info->features |=
 		((base->features & DASD_FEATURE_READONLY) != 0);
 
-	if (base->discipline)
-		memcpy(dasd_info->type, base->discipline->name, 4);
-	else
-		memcpy(dasd_info->type, "none", 4);
+	memcpy(dasd_info->type, base->discipline->name, 4);
 
 	if (block->request_queue->request_fn) {
 		struct list_head *l;
@@ -358,9 +355,8 @@
 }
 
 static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd,
-		unsigned long arg)
+				  struct cmbdata __user *argp)
 {
-	struct cmbdata __user *argp = (void __user *) arg;
 	size_t size = _IOC_SIZE(cmd);
 	struct cmbdata data;
 	int ret;
@@ -376,7 +372,12 @@
 	      unsigned int cmd, unsigned long arg)
 {
 	struct dasd_block *block = bdev->bd_disk->private_data;
-	void __user *argp = (void __user *)arg;
+	void __user *argp;
+
+	if (is_compat_task())
+		argp = compat_ptr(arg);
+	else
+		argp = (void __user *)arg;
 
 	if (!block)
                 return -ENODEV;
@@ -414,7 +415,7 @@
 	case BIODASDCMFDISABLE:
 		return disable_cmf(block->base->cdev);
 	case BIODASDREADALLCMB:
-		return dasd_ioctl_readall_cmb(block, cmd, arg);
+		return dasd_ioctl_readall_cmb(block, cmd, argp);
 	default:
 		/* if the discipline has an ioctl method try it. */
 		if (block->base->discipline->ioctl) {
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index 6315fbd..71f95f5 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -72,7 +72,7 @@
 	/* Print device number. */
 	seq_printf(m, "%s", dev_name(&device->cdev->dev));
 	/* Print discipline string. */
-	if (device != NULL && device->discipline != NULL)
+	if (device->discipline != NULL)
 		seq_printf(m, "(%s)", device->discipline->name);
 	else
 		seq_printf(m, "(none)");
@@ -92,10 +92,7 @@
 	substr = (device->features & DASD_FEATURE_READONLY) ? "(ro)" : " ";
 	seq_printf(m, "%4s: ", substr);
 	/* Print device status information. */
-	switch ((device != NULL) ? device->state : -1) {
-	case -1:
-		seq_printf(m, "unknown");
-		break;
+	switch (device->state) {
 	case DASD_STATE_NEW:
 		seq_printf(m, "new");
 		break;
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 9d61683..59ec073 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -1037,22 +1037,6 @@
 }
 
 /*
- * Currently we don't have any io controls for 3215 ttys
- */
-static int tty3215_ioctl(struct tty_struct *tty, struct file * file,
-			 unsigned int cmd, unsigned long arg)
-{
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	switch (cmd) {
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-/*
  * Disable reading from a 3215 tty
  */
 static void tty3215_throttle(struct tty_struct * tty)
@@ -1117,7 +1101,6 @@
 	.write_room = tty3215_write_room,
 	.chars_in_buffer = tty3215_chars_in_buffer,
 	.flush_buffer = tty3215_flush_buffer,
-	.ioctl = tty3215_ioctl,
 	.throttle = tty3215_throttle,
 	.unthrottle = tty3215_unthrottle,
 	.stop = tty3215_stop,
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 247b2b9..31c59b0 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/smp_lock.h>
 
+#include <asm/compat.h>
 #include <asm/ccwdev.h>
 #include <asm/cio.h>
 #include <asm/ebcdic.h>
@@ -322,6 +323,7 @@
 static long
 fs3270_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
+	char __user *argp;
 	struct fs3270 *fp;
 	struct raw3270_iocb iocb;
 	int rc;
@@ -329,6 +331,10 @@
 	fp = filp->private_data;
 	if (!fp)
 		return -ENODEV;
+	if (is_compat_task())
+		argp = compat_ptr(arg);
+	else
+		argp = (char __user *)arg;
 	rc = 0;
 	mutex_lock(&fs3270_mutex);
 	switch (cmd) {
@@ -339,10 +345,10 @@
 		fp->write_command = arg;
 		break;
 	case TUBGETI:
-		rc = put_user(fp->read_command, (char __user *) arg);
+		rc = put_user(fp->read_command, argp);
 		break;
 	case TUBGETO:
-		rc = put_user(fp->write_command,(char __user *) arg);
+		rc = put_user(fp->write_command, argp);
 		break;
 	case TUBGETMOD:
 		iocb.model = fp->view.model;
@@ -351,8 +357,7 @@
 		iocb.pf_cnt = 24;
 		iocb.re_cnt = 20;
 		iocb.map = 0;
-		if (copy_to_user((char __user *) arg, &iocb,
-				 sizeof(struct raw3270_iocb)))
+		if (copy_to_user(argp, &iocb, sizeof(struct raw3270_iocb)))
 			rc = -EFAULT;
 		break;
 	}
@@ -511,8 +516,8 @@
 	.write		 = fs3270_write,	/* write */
 	.unlocked_ioctl	 = fs3270_ioctl,	/* ioctl */
 	.compat_ioctl	 = fs3270_ioctl,	/* ioctl */
-	.open	 	= fs3270_open,		/* open */
-	.release 	= fs3270_close,		/* release */
+	.open		 = fs3270_open,		/* open */
+	.release	 = fs3270_close,	/* release */
 };
 
 /*
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index b9d2a00..3796ffd 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -495,6 +495,10 @@
 		if (tty->driver_data == NULL)
 			return -ENOMEM;
 		tty->low_latency = 0;
+		if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
+			tty->winsize.ws_row = 24;
+			tty->winsize.ws_col = 80;
+		}
 	}
 	return 0;
 }
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 96816149..8d3d720 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -46,8 +46,6 @@
  */
 static int tapeblock_open(struct block_device *, fmode_t);
 static int tapeblock_release(struct gendisk *, fmode_t);
-static int tapeblock_ioctl(struct block_device *, fmode_t, unsigned int,
-				unsigned long);
 static int tapeblock_medium_changed(struct gendisk *);
 static int tapeblock_revalidate_disk(struct gendisk *);
 
@@ -55,7 +53,6 @@
 	.owner		 = THIS_MODULE,
 	.open		 = tapeblock_open,
 	.release	 = tapeblock_release,
-	.ioctl		 = tapeblock_ioctl,
 	.media_changed   = tapeblock_medium_changed,
 	.revalidate_disk = tapeblock_revalidate_disk,
 };
@@ -416,42 +413,6 @@
 }
 
 /*
- * Support of some generic block device IOCTLs.
- */
-static int
-tapeblock_ioctl(
-	struct block_device *	bdev,
-	fmode_t			mode,
-	unsigned int		command,
-	unsigned long		arg
-) {
-	int rc;
-	int minor;
-	struct gendisk *disk = bdev->bd_disk;
-	struct tape_device *device;
-
-	rc     = 0;
-	BUG_ON(!disk);
-	device = disk->private_data;
-	BUG_ON(!device);
-	minor  = MINOR(bdev->bd_dev);
-
-	DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
-	DBF_LH(6, "device = %d:%d\n", tapeblock_major, minor);
-
-	switch (command) {
-		/* Refuse some IOCTL calls without complaining (mount). */
-		case 0x5310:		/* CDROMMULTISESSION */
-			rc = -EINVAL;
-			break;
-		default:
-			rc = -EINVAL;
-	}
-
-	return rc;
-}
-
-/*
  * Initialize block device frontend.
  */
 int
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 2125ec7..539045a 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -18,6 +18,7 @@
 #include <linux/proc_fs.h>
 #include <linux/mtio.h>
 #include <linux/smp_lock.h>
+#include <linux/compat.h>
 
 #include <asm/uaccess.h>
 
@@ -37,8 +38,9 @@
 static int tapechar_open(struct inode *,struct file *);
 static int tapechar_release(struct inode *,struct file *);
 static long tapechar_ioctl(struct file *, unsigned int, unsigned long);
-static long tapechar_compat_ioctl(struct file *, unsigned int,
-			  unsigned long);
+#ifdef CONFIG_COMPAT
+static long tapechar_compat_ioctl(struct file *, unsigned int, unsigned long);
+#endif
 
 static const struct file_operations tape_fops =
 {
@@ -46,7 +48,9 @@
 	.read = tapechar_read,
 	.write = tapechar_write,
 	.unlocked_ioctl = tapechar_ioctl,
+#ifdef CONFIG_COMPAT
 	.compat_ioctl = tapechar_compat_ioctl,
+#endif
 	.open = tapechar_open,
 	.release = tapechar_release,
 };
@@ -457,15 +461,22 @@
 	return rc;
 }
 
+#ifdef CONFIG_COMPAT
 static long
 tapechar_compat_ioctl(struct file *filp, unsigned int no, unsigned long data)
 {
 	struct tape_device *device = filp->private_data;
 	int rval = -ENOIOCTLCMD;
+	unsigned long argp;
 
+	/* The 'arg' argument of any ioctl function may only be used for
+	 * pointers because of the compat pointer conversion.
+	 * Consider this when adding new ioctls.
+	 */
+	argp = (unsigned long) compat_ptr(data);
 	if (device->discipline->ioctl_fn) {
 		mutex_lock(&device->mutex);
-		rval = device->discipline->ioctl_fn(device, no, data);
+		rval = device->discipline->ioctl_fn(device, no, argp);
 		mutex_unlock(&device->mutex);
 		if (rval == -EINVAL)
 			rval = -ENOIOCTLCMD;
@@ -473,6 +484,7 @@
 
 	return rval;
 }
+#endif /* CONFIG_COMPAT */
 
 /*
  * Initialize character device frontend.
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index a6087ce..921dcda 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
+#include <asm/compat.h>
 #include <asm/cpcmd.h>
 #include <asm/debug.h>
 #include <asm/uaccess.h>
@@ -139,21 +140,26 @@
 static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct vmcp_session *session;
+	int __user *argp;
 	int temp;
 
 	session = (struct vmcp_session *)file->private_data;
+	if (is_compat_task())
+		argp = compat_ptr(arg);
+	else
+		argp = (int __user *)arg;
 	if (mutex_lock_interruptible(&session->mutex))
 		return -ERESTARTSYS;
 	switch (cmd) {
 	case VMCP_GETCODE:
 		temp = session->resp_code;
 		mutex_unlock(&session->mutex);
-		return put_user(temp, (int __user *)arg);
+		return put_user(temp, argp);
 	case VMCP_SETBUF:
 		free_pages((unsigned long)session->response,
 				get_order(session->bufsize));
 		session->response=NULL;
-		temp = get_user(session->bufsize, (int __user *)arg);
+		temp = get_user(session->bufsize, argp);
 		if (get_order(session->bufsize) > 8) {
 			session->bufsize = PAGE_SIZE;
 			temp = -EINVAL;
@@ -163,7 +169,7 @@
 	case VMCP_GETSIZE:
 		temp = session->resp_size;
 		mutex_unlock(&session->mutex);
-		return put_user(temp, (int __user *)arg);
+		return put_user(temp, argp);
 	default:
 		mutex_unlock(&session->mutex);
 		return -ENOIOCTLCMD;
diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c
index cc5144b..c84ac94 100644
--- a/drivers/s390/cio/chsc_sch.c
+++ b/drivers/s390/cio/chsc_sch.c
@@ -12,6 +12,7 @@
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
 
+#include <asm/compat.h>
 #include <asm/cio.h>
 #include <asm/chsc.h>
 #include <asm/isc.h>
@@ -770,24 +771,30 @@
 static long chsc_ioctl(struct file *filp, unsigned int cmd,
 		       unsigned long arg)
 {
+	void __user *argp;
+
 	CHSC_MSG(2, "chsc_ioctl called, cmd=%x\n", cmd);
+	if (is_compat_task())
+		argp = compat_ptr(arg);
+	else
+		argp = (void __user *)arg;
 	switch (cmd) {
 	case CHSC_START:
-		return chsc_ioctl_start((void __user *)arg);
+		return chsc_ioctl_start(argp);
 	case CHSC_INFO_CHANNEL_PATH:
-		return chsc_ioctl_info_channel_path((void __user *)arg);
+		return chsc_ioctl_info_channel_path(argp);
 	case CHSC_INFO_CU:
-		return chsc_ioctl_info_cu((void __user *)arg);
+		return chsc_ioctl_info_cu(argp);
 	case CHSC_INFO_SCH_CU:
-		return chsc_ioctl_info_sch_cu((void __user *)arg);
+		return chsc_ioctl_info_sch_cu(argp);
 	case CHSC_INFO_CI:
-		return chsc_ioctl_conf_info((void __user *)arg);
+		return chsc_ioctl_conf_info(argp);
 	case CHSC_INFO_CCL:
-		return chsc_ioctl_conf_comp_list((void __user *)arg);
+		return chsc_ioctl_conf_comp_list(argp);
 	case CHSC_INFO_CPD:
-		return chsc_ioctl_chpd((void __user *)arg);
+		return chsc_ioctl_chpd(argp);
 	case CHSC_INFO_DCAL:
-		return chsc_ioctl_dcal((void __user *)arg);
+		return chsc_ioctl_dcal(argp);
 	default: /* unknown ioctl number */
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 999fe80..62b654a 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -531,7 +531,7 @@
 	qdio_siga_sync_q(q);
 	get_buf_state(q, q->first_to_check, &state, 0);
 
-	if (state == SLSB_P_INPUT_PRIMED)
+	if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR)
 		/* more work coming */
 		return 0;
 
@@ -960,6 +960,8 @@
 			qdio_handle_activate_check(cdev, intparm, cstat,
 						   dstat);
 		break;
+	case QDIO_IRQ_STATE_STOPPED:
+		break;
 	default:
 		WARN_ON(1);
 	}
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index 0d4d18b..c68be24 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -393,10 +393,12 @@
 			 * u_mult_inv > 128 bytes.
 			 */
 			if (copied == 0) {
-				int len;
+				unsigned int len;
 				spin_unlock_bh(&zcrypt_device_lock);
 				/* len is max 256 / 2 - 120 = 8 */
 				len = crt->inputdatalength / 2 - 120;
+				if (len > sizeof(z1))
+					return -EFAULT;
 				z1 = z2 = z3 = 0;
 				if (copy_from_user(&z1, crt->np_prime, len) ||
 				    copy_from_user(&z2, crt->bp_key, len) ||
diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c
index a23726a..142f72a 100644
--- a/drivers/s390/crypto/zcrypt_pcicc.c
+++ b/drivers/s390/crypto/zcrypt_pcicc.c
@@ -373,6 +373,8 @@
 			zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD;
 			return -EAGAIN;
 		}
+		if (service_rc == 8 && service_rs == 72)
+			return -EINVAL;
 		zdev->online = 0;
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c
index 79c1205..68f3e62 100644
--- a/drivers/s390/crypto/zcrypt_pcixcc.c
+++ b/drivers/s390/crypto/zcrypt_pcixcc.c
@@ -470,6 +470,8 @@
 		}
 		if (service_rc == 12 && service_rs == 769)
 			return -EINVAL;
+		if (service_rc == 8 && service_rs == 72)
+			return -EINVAL;
 		zdev->online = 0;
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index f932400..0eb6eef 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -12,6 +12,7 @@
 
 #include <linux/types.h>
 #include <linux/miscdevice.h>
+#include <asm/compat.h>
 #include <asm/ccwdev.h>
 #include "zfcp_def.h"
 #include "zfcp_ext.h"
@@ -163,7 +164,7 @@
 }
 
 static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command,
-				unsigned long buffer)
+				unsigned long arg)
 {
 	struct zfcp_cfdc_data *data;
 	struct zfcp_cfdc_data __user *data_user;
@@ -175,7 +176,11 @@
 	if (command != ZFCP_CFDC_IOC)
 		return -ENOTTY;
 
-	data_user = (void __user *) buffer;
+	if (is_compat_task())
+		data_user = compat_ptr(arg);
+	else
+		data_user = (void __user *)arg;
+
 	if (!data_user)
 		return -EINVAL;
 
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 8445095..7369c89 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -327,7 +327,7 @@
 			break;
 		zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd);
 		zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial);
-		p += sprintf(*p, "\n");
+		*p += sprintf(*p, "\n");
 		break;
 
 	case FSF_QTCB_OPEN_PORT_WITH_DID:
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 03dec83..66bdb34 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -108,6 +108,7 @@
 extern int zfcp_fc_gs_setup(struct zfcp_adapter *);
 extern void zfcp_fc_gs_destroy(struct zfcp_adapter *);
 extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *);
+extern int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *);
 
 /* zfcp_fsf.c */
 extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
@@ -129,9 +130,9 @@
 extern int zfcp_fsf_status_read(struct zfcp_qdio *);
 extern int zfcp_status_read_refill(struct zfcp_adapter *adapter);
 extern int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *, struct zfcp_fsf_ct_els *,
-			    mempool_t *);
+			    mempool_t *, unsigned int);
 extern int zfcp_fsf_send_els(struct zfcp_adapter *, u32,
-			     struct zfcp_fsf_ct_els *);
+			     struct zfcp_fsf_ct_els *, unsigned int);
 extern int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *,
 					  struct scsi_cmnd *);
 extern void zfcp_fsf_req_free(struct zfcp_fsf_req *);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index ac5e3b7..271399f 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -258,7 +258,8 @@
 	gid_pn->gid_pn_req.gid_pn.fn_wwpn = port->wwpn;
 
 	ret = zfcp_fsf_send_ct(&adapter->gs->ds, &gid_pn->ct,
-			       adapter->pool.gid_pn_req);
+			       adapter->pool.gid_pn_req,
+			       ZFCP_FC_CTELS_TMO);
 	if (!ret) {
 		wait_for_completion(&completion);
 		zfcp_fc_ns_gid_pn_eval(gid_pn);
@@ -421,7 +422,8 @@
 	hton24(adisc->adisc_req.adisc_port_id,
 	       fc_host_port_id(adapter->scsi_host));
 
-	ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els);
+	ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els,
+				ZFCP_FC_CTELS_TMO);
 	if (ret)
 		kmem_cache_free(zfcp_data.adisc_cache, adisc);
 
@@ -532,7 +534,8 @@
 	ct->req = &gpn_ft->sg_req;
 	ct->resp = gpn_ft->sg_resp;
 
-	ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL);
+	ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL,
+			       ZFCP_FC_CTELS_TMO);
 	if (!ret)
 		wait_for_completion(&completion);
 	return ret;
@@ -668,15 +671,52 @@
 {
 	struct fc_bsg_job *job = data;
 	struct zfcp_fsf_ct_els *zfcp_ct_els = job->dd_data;
-	int status = zfcp_ct_els->status;
-	int reply_status;
+	struct fc_bsg_reply *jr = job->reply;
 
-	reply_status = status ? FC_CTELS_STATUS_REJECT : FC_CTELS_STATUS_OK;
-	job->reply->reply_data.ctels_reply.status = reply_status;
-	job->reply->reply_payload_rcv_len = job->reply_payload.payload_len;
+	jr->reply_payload_rcv_len = job->reply_payload.payload_len;
+	jr->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
+	jr->result = zfcp_ct_els->status ? -EIO : 0;
 	job->job_done(job);
 }
 
+static struct zfcp_fc_wka_port *zfcp_fc_job_wka_port(struct fc_bsg_job *job)
+{
+	u32 preamble_word1;
+	u8 gs_type;
+	struct zfcp_adapter *adapter;
+
+	preamble_word1 = job->request->rqst_data.r_ct.preamble_word1;
+	gs_type = (preamble_word1 & 0xff000000) >> 24;
+
+	adapter = (struct zfcp_adapter *) job->shost->hostdata[0];
+
+	switch (gs_type) {
+	case FC_FST_ALIAS:
+		return &adapter->gs->as;
+	case FC_FST_MGMT:
+		return &adapter->gs->ms;
+	case FC_FST_TIME:
+		return &adapter->gs->ts;
+		break;
+	case FC_FST_DIR:
+		return &adapter->gs->ds;
+		break;
+	default:
+		return NULL;
+	}
+}
+
+static void zfcp_fc_ct_job_handler(void *data)
+{
+	struct fc_bsg_job *job = data;
+	struct zfcp_fc_wka_port *wka_port;
+
+	wka_port = zfcp_fc_job_wka_port(job);
+	zfcp_fc_wka_port_put(wka_port);
+
+	zfcp_fc_ct_els_job_handler(data);
+}
+
 static int zfcp_fc_exec_els_job(struct fc_bsg_job *job,
 				struct zfcp_adapter *adapter)
 {
@@ -695,43 +735,27 @@
 	} else
 		d_id = ntoh24(job->request->rqst_data.h_els.port_id);
 
-	return zfcp_fsf_send_els(adapter, d_id, els);
+	els->handler = zfcp_fc_ct_els_job_handler;
+	return zfcp_fsf_send_els(adapter, d_id, els, job->req->timeout / HZ);
 }
 
 static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job,
 			       struct zfcp_adapter *adapter)
 {
 	int ret;
-	u8 gs_type;
 	struct zfcp_fsf_ct_els *ct = job->dd_data;
 	struct zfcp_fc_wka_port *wka_port;
-	u32 preamble_word1;
 
-	preamble_word1 = job->request->rqst_data.r_ct.preamble_word1;
-	gs_type = (preamble_word1 & 0xff000000) >> 24;
-
-	switch (gs_type) {
-	case FC_FST_ALIAS:
-		wka_port = &adapter->gs->as;
-		break;
-	case FC_FST_MGMT:
-		wka_port = &adapter->gs->ms;
-		break;
-	case FC_FST_TIME:
-		wka_port = &adapter->gs->ts;
-		break;
-	case FC_FST_DIR:
-		wka_port = &adapter->gs->ds;
-		break;
-	default:
-		return -EINVAL; /* no such service */
-	}
+	wka_port = zfcp_fc_job_wka_port(job);
+	if (!wka_port)
+		return -EINVAL;
 
 	ret = zfcp_fc_wka_port_get(wka_port);
 	if (ret)
 		return ret;
 
-	ret = zfcp_fsf_send_ct(wka_port, ct, NULL);
+	ct->handler = zfcp_fc_ct_job_handler;
+	ret = zfcp_fsf_send_ct(wka_port, ct, NULL, job->req->timeout / HZ);
 	if (ret)
 		zfcp_fc_wka_port_put(wka_port);
 
@@ -752,7 +776,6 @@
 
 	ct_els->req = job->request_payload.sg_list;
 	ct_els->resp = job->reply_payload.sg_list;
-	ct_els->handler = zfcp_fc_ct_els_job_handler;
 	ct_els->handler_data = job;
 
 	switch (job->request->msgcode) {
@@ -767,6 +790,12 @@
 	}
 }
 
+int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *job)
+{
+	/* hardware tracks timeout, reset bsg timeout to not interfere */
+	return -EAGAIN;
+}
+
 int zfcp_fc_gs_setup(struct zfcp_adapter *adapter)
 {
 	struct zfcp_fc_wka_ports *wka_ports;
diff --git a/drivers/s390/scsi/zfcp_fc.h b/drivers/s390/scsi/zfcp_fc.h
index cb2a366..0747b08 100644
--- a/drivers/s390/scsi/zfcp_fc.h
+++ b/drivers/s390/scsi/zfcp_fc.h
@@ -27,6 +27,8 @@
 #define ZFCP_FC_GPN_FT_MAX_ENT	  (ZFCP_FC_GPN_FT_NUM_BUFS * \
 					(ZFCP_FC_GPN_FT_ENT_PAGE + 1))
 
+#define ZFCP_FC_CTELS_TMO	(2 * FC_DEF_R_A_TOV / 1000)
+
 /**
  * struct zfcp_fc_gid_pn_req - container for ct header plus gid_pn request
  * @ct_hdr: FC GS common transport header
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 482dcd9..e8fb4d9 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -1068,20 +1068,20 @@
 static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req,
 				 struct scatterlist *sg_req,
 				 struct scatterlist *sg_resp,
-				 int max_sbals)
+				 int max_sbals, unsigned int timeout)
 {
 	int ret;
-	unsigned int fcp_chan_timeout;
 
 	ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals);
 	if (ret)
 		return ret;
 
 	/* common settings for ct/gs and els requests */
-	fcp_chan_timeout = 2 * FC_DEF_R_A_TOV / 1000;
+	if (timeout > 255)
+		timeout = 255; /* max value accepted by hardware */
 	req->qtcb->bottom.support.service_class = FSF_CLASS_3;
-	req->qtcb->bottom.support.timeout = fcp_chan_timeout;
-	zfcp_fsf_start_timer(req, (fcp_chan_timeout + 10) * HZ);
+	req->qtcb->bottom.support.timeout = timeout;
+	zfcp_fsf_start_timer(req, (timeout + 10) * HZ);
 
 	return 0;
 }
@@ -1092,7 +1092,8 @@
  * @pool: if non-null this mempool is used to allocate struct zfcp_fsf_req
  */
 int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port,
-		     struct zfcp_fsf_ct_els *ct, mempool_t *pool)
+		     struct zfcp_fsf_ct_els *ct, mempool_t *pool,
+		     unsigned int timeout)
 {
 	struct zfcp_qdio *qdio = wka_port->adapter->qdio;
 	struct zfcp_fsf_req *req;
@@ -1111,7 +1112,7 @@
 
 	req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
 	ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp,
-				    FSF_MAX_SBALS_PER_REQ);
+				    FSF_MAX_SBALS_PER_REQ, timeout);
 	if (ret)
 		goto failed_send;
 
@@ -1188,7 +1189,7 @@
  * @els: pointer to struct zfcp_send_els with data for the command
  */
 int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id,
-		      struct zfcp_fsf_ct_els *els)
+		      struct zfcp_fsf_ct_els *els, unsigned int timeout)
 {
 	struct zfcp_fsf_req *req;
 	struct zfcp_qdio *qdio = adapter->qdio;
@@ -1206,7 +1207,7 @@
 	}
 
 	req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
-	ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2);
+	ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2, timeout);
 
 	if (ret)
 		goto failed_send;
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 771cc53..8e6fc68 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -652,6 +652,7 @@
 	.show_host_port_state = 1,
 	.show_host_active_fc4s = 1,
 	.bsg_request = zfcp_fc_exec_bsg_job,
+	.bsg_timeout = zfcp_fc_timeout_bsg_job,
 	/* no functions registered for following dynamic attributes but
 	   directly set by LLDD */
 	.show_host_port_type = 1,
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 2a88985..7e26ebc 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -293,7 +293,10 @@
 			status = -EINVAL;
 		}
 	}
-	aac_fib_complete(fibptr);
+	/* Do not set XferState to zero unless receives a response from F/W */
+	if (status >= 0)
+		aac_fib_complete(fibptr);
+
 	/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
 	if (status >= 0) {
 		if ((aac_commit == 1) || commit_flag) {
@@ -310,13 +313,18 @@
 				    FsaNormal,
 				    1, 1,
 				    NULL, NULL);
-			aac_fib_complete(fibptr);
+			/* Do not set XferState to zero unless
+			 * receives a response from F/W */
+			if (status >= 0)
+				aac_fib_complete(fibptr);
 		} else if (aac_commit == 0) {
 			printk(KERN_WARNING
 			  "aac_get_config_status: Foreign device configurations are being ignored\n");
 		}
 	}
-	aac_fib_free(fibptr);
+	/* FIB should be freed only after getting the response from the F/W */
+	if (status != -ERESTARTSYS)
+		aac_fib_free(fibptr);
 	return status;
 }
 
@@ -355,7 +363,9 @@
 		maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
 		aac_fib_complete(fibptr);
 	}
-	aac_fib_free(fibptr);
+	/* FIB should be freed only after getting the response from the F/W */
+	if (status != -ERESTARTSYS)
+		aac_fib_free(fibptr);
 
 	if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
 		maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
@@ -1245,8 +1255,12 @@
 			 NULL);
 
 	if (rcode < 0) {
-		aac_fib_complete(fibptr);
-		aac_fib_free(fibptr);
+		/* FIB should be freed only after
+		 * getting the response from the F/W */
+		if (rcode != -ERESTARTSYS) {
+			aac_fib_complete(fibptr);
+			aac_fib_free(fibptr);
+		}
 		return rcode;
 	}
 	memcpy(&dev->adapter_info, info, sizeof(*info));
@@ -1270,6 +1284,12 @@
 
 		if (rcode >= 0)
 			memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo));
+		if (rcode == -ERESTARTSYS) {
+			fibptr = aac_fib_alloc(dev);
+			if (!fibptr)
+				return -ENOMEM;
+		}
+
 	}
 
 
@@ -1470,9 +1490,11 @@
 			  (dev->scsi_host_ptr->sg_tablesize * 8) + 112;
 		}
 	}
-
-	aac_fib_complete(fibptr);
-	aac_fib_free(fibptr);
+	/* FIB should be freed only after getting the response from the F/W */
+	if (rcode != -ERESTARTSYS) {
+		aac_fib_complete(fibptr);
+		aac_fib_free(fibptr);
+	}
 
 	return rcode;
 }
@@ -1633,6 +1655,7 @@
 	 *	Alocate and initialize a Fib
 	 */
 	if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+		printk(KERN_WARNING "aac_read: fib allocation failed\n");
 		return -1;
 	}
 
@@ -1712,9 +1735,14 @@
 	 *	Allocate and initialize a Fib then setup a BlockWrite command
 	 */
 	if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
-		scsicmd->result = DID_ERROR << 16;
-		scsicmd->scsi_done(scsicmd);
-		return 0;
+		/* FIB temporarily unavailable,not catastrophic failure */
+
+		/* scsicmd->result = DID_ERROR << 16;
+		 * scsicmd->scsi_done(scsicmd);
+		 * return 0;
+		 */
+		printk(KERN_WARNING "aac_write: fib allocation failed\n");
+		return -1;
 	}
 
 	status = aac_adapter_write(cmd_fibcontext, scsicmd, lba, count, fua);
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 83986ed..619c02d 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,7 +12,7 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2461
+# define AAC_DRIVER_BUILD 24702
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
@@ -1036,6 +1036,9 @@
 	u8			printf_enabled;
 	u8			in_reset;
 	u8			msi;
+	int			management_fib_count;
+	spinlock_t		manage_lock;
+
 };
 
 #define aac_adapter_interrupt(dev) \
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index 0391d75..9c0c911 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -153,7 +153,7 @@
 		fibptr->hw_fib_pa = hw_fib_pa;
 		fibptr->hw_fib_va = hw_fib;
 	}
-	if (retval != -EINTR)
+	if (retval != -ERESTARTSYS)
 		aac_fib_free(fibptr);
 	return retval;
 }
@@ -322,7 +322,7 @@
 		}
 		if (f.wait) {
 			if(down_interruptible(&fibctx->wait_sem) < 0) {
-				status = -EINTR;
+				status = -ERESTARTSYS;
 			} else {
 				/* Lock again and retry */
 				spin_lock_irqsave(&dev->fib_lock, flags);
@@ -593,10 +593,10 @@
 				u64 addr;
 				void* p;
 				if (upsg->sg[i].count >
-				    (dev->adapter_info.options &
+				    ((dev->adapter_info.options &
 				     AAC_OPT_NEW_COMM) ?
 				      (dev->scsi_host_ptr->max_sectors << 9) :
-				      65536) {
+				      65536)) {
 					rcode = -EINVAL;
 					goto cleanup;
 				}
@@ -645,10 +645,10 @@
 				u64 addr;
 				void* p;
 				if (usg->sg[i].count >
-				    (dev->adapter_info.options &
+				    ((dev->adapter_info.options &
 				     AAC_OPT_NEW_COMM) ?
 				      (dev->scsi_host_ptr->max_sectors << 9) :
-				      65536) {
+				      65536)) {
 					rcode = -EINVAL;
 					goto cleanup;
 				}
@@ -695,10 +695,10 @@
 				uintptr_t addr;
 				void* p;
 				if (usg->sg[i].count >
-				    (dev->adapter_info.options &
+				    ((dev->adapter_info.options &
 				     AAC_OPT_NEW_COMM) ?
 				      (dev->scsi_host_ptr->max_sectors << 9) :
-				      65536) {
+				      65536)) {
 					rcode = -EINVAL;
 					goto cleanup;
 				}
@@ -734,10 +734,10 @@
 				dma_addr_t addr;
 				void* p;
 				if (upsg->sg[i].count >
-				    (dev->adapter_info.options &
+				    ((dev->adapter_info.options &
 				     AAC_OPT_NEW_COMM) ?
 				      (dev->scsi_host_ptr->max_sectors << 9) :
-				      65536) {
+				      65536)) {
 					rcode = -EINVAL;
 					goto cleanup;
 				}
@@ -772,8 +772,8 @@
 		psg->count = cpu_to_le32(sg_indx+1);
 		status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
 	}
-	if (status == -EINTR) {
-		rcode = -EINTR;
+	if (status == -ERESTARTSYS) {
+		rcode = -ERESTARTSYS;
 		goto cleanup;
 	}
 
@@ -810,7 +810,7 @@
 	for(i=0; i <= sg_indx; i++){
 		kfree(sg_list[i]);
 	}
-	if (rcode != -EINTR) {
+	if (rcode != -ERESTARTSYS) {
 		aac_fib_complete(srbfib);
 		aac_fib_free(srbfib);
 	}
@@ -848,7 +848,7 @@
 	 */
 
 	status = aac_dev_ioctl(dev, cmd, arg);
-	if(status != -ENOTTY)
+	if (status != -ENOTTY)
 		return status;
 
 	switch (cmd) {
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 666d515..a726148 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -194,7 +194,9 @@
 
 	if (status >= 0)
 		aac_fib_complete(fibctx);
-	aac_fib_free(fibctx);
+	/* FIB should be freed only after getting the response from the F/W */
+	if (status != -ERESTARTSYS)
+		aac_fib_free(fibctx);
 	return status;
 }
 
@@ -304,6 +306,8 @@
 	/*
 	 *	Check the preferred comm settings, defaults from template.
 	 */
+	dev->management_fib_count = 0;
+	spin_lock_init(&dev->manage_lock);
 	dev->max_fib_size = sizeof(struct hw_fib);
 	dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
 		- sizeof(struct aac_fibhdr)
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 956261f..94d2954 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -189,7 +189,14 @@
 
 void aac_fib_free(struct fib *fibptr)
 {
-	unsigned long flags;
+	unsigned long flags, flagsv;
+
+	spin_lock_irqsave(&fibptr->event_lock, flagsv);
+	if (fibptr->done == 2) {
+		spin_unlock_irqrestore(&fibptr->event_lock, flagsv);
+		return;
+	}
+	spin_unlock_irqrestore(&fibptr->event_lock, flagsv);
 
 	spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
 	if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
@@ -390,6 +397,8 @@
 	struct hw_fib * hw_fib = fibptr->hw_fib_va;
 	unsigned long flags = 0;
 	unsigned long qflags;
+	unsigned long mflags = 0;
+
 
 	if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
 		return -EBUSY;
@@ -471,9 +480,31 @@
 	if (!dev->queues)
 		return -EBUSY;
 
-	if(wait)
+	if (wait) {
+
+		spin_lock_irqsave(&dev->manage_lock, mflags);
+		if (dev->management_fib_count >= AAC_NUM_MGT_FIB) {
+			printk(KERN_INFO "No management Fibs Available:%d\n",
+						dev->management_fib_count);
+			spin_unlock_irqrestore(&dev->manage_lock, mflags);
+			return -EBUSY;
+		}
+		dev->management_fib_count++;
+		spin_unlock_irqrestore(&dev->manage_lock, mflags);
 		spin_lock_irqsave(&fibptr->event_lock, flags);
-	aac_adapter_deliver(fibptr);
+	}
+
+	if (aac_adapter_deliver(fibptr) != 0) {
+		printk(KERN_ERR "aac_fib_send: returned -EBUSY\n");
+		if (wait) {
+			spin_unlock_irqrestore(&fibptr->event_lock, flags);
+			spin_lock_irqsave(&dev->manage_lock, mflags);
+			dev->management_fib_count--;
+			spin_unlock_irqrestore(&dev->manage_lock, mflags);
+		}
+		return -EBUSY;
+	}
+
 
 	/*
 	 *	If the caller wanted us to wait for response wait now.
@@ -516,14 +547,15 @@
 				udelay(5);
 			}
 		} else if (down_interruptible(&fibptr->event_wait)) {
-			fibptr->done = 2;
-			up(&fibptr->event_wait);
+			/* Do nothing ... satisfy
+			 * down_interruptible must_check */
 		}
+
 		spin_lock_irqsave(&fibptr->event_lock, flags);
-		if ((fibptr->done == 0) || (fibptr->done == 2)) {
+		if (fibptr->done == 0) {
 			fibptr->done = 2; /* Tell interrupt we aborted */
 			spin_unlock_irqrestore(&fibptr->event_lock, flags);
-			return -EINTR;
+			return -ERESTARTSYS;
 		}
 		spin_unlock_irqrestore(&fibptr->event_lock, flags);
 		BUG_ON(fibptr->done == 0);
@@ -689,6 +721,7 @@
 
 int aac_fib_complete(struct fib *fibptr)
 {
+	unsigned long flags;
 	struct hw_fib * hw_fib = fibptr->hw_fib_va;
 
 	/*
@@ -709,6 +742,13 @@
 	 *	command is complete that we had sent to the adapter and this
 	 *	cdb could be reused.
 	 */
+	spin_lock_irqsave(&fibptr->event_lock, flags);
+	if (fibptr->done == 2) {
+		spin_unlock_irqrestore(&fibptr->event_lock, flags);
+		return 0;
+	}
+	spin_unlock_irqrestore(&fibptr->event_lock, flags);
+
 	if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
 		(hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
 	{
@@ -1355,7 +1395,10 @@
 
 			if (status >= 0)
 				aac_fib_complete(fibctx);
-			aac_fib_free(fibctx);
+			/* FIB should be freed only after getting
+			 * the response from the F/W */
+			if (status != -ERESTARTSYS)
+				aac_fib_free(fibctx);
 		}
 	}
 
@@ -1759,6 +1802,7 @@
 				struct fib *fibptr;
 
 				if ((fibptr = aac_fib_alloc(dev))) {
+					int status;
 					__le32 *info;
 
 					aac_fib_init(fibptr);
@@ -1769,15 +1813,21 @@
 
 					*info = cpu_to_le32(now.tv_sec);
 
-					(void)aac_fib_send(SendHostTime,
+					status = aac_fib_send(SendHostTime,
 						fibptr,
 						sizeof(*info),
 						FsaNormal,
 						1, 1,
 						NULL,
 						NULL);
-					aac_fib_complete(fibptr);
-					aac_fib_free(fibptr);
+					/* Do not set XferState to zero unless
+					 * receives a response from F/W */
+					if (status >= 0)
+						aac_fib_complete(fibptr);
+					/* FIB should be freed only after
+					 * getting the response from the F/W */
+					if (status != -ERESTARTSYS)
+						aac_fib_free(fibptr);
 				}
 				difference = (long)(unsigned)update_interval*HZ;
 			} else {
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index abc9ef5..9c7408fe 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -57,9 +57,9 @@
 	struct hw_fib * hwfib;
 	struct fib * fib;
 	int consumed = 0;
-	unsigned long flags;
+	unsigned long flags, mflags;
 
-	spin_lock_irqsave(q->lock, flags);	
+	spin_lock_irqsave(q->lock, flags);
 	/*
 	 *	Keep pulling response QEs off the response queue and waking
 	 *	up the waiters until there are no more QEs. We then return
@@ -125,12 +125,21 @@
 		} else {
 			unsigned long flagv;
 			spin_lock_irqsave(&fib->event_lock, flagv);
-			if (!fib->done)
+			if (!fib->done) {
 				fib->done = 1;
-			up(&fib->event_wait);
+				up(&fib->event_wait);
+			}
 			spin_unlock_irqrestore(&fib->event_lock, flagv);
+
+			spin_lock_irqsave(&dev->manage_lock, mflags);
+			dev->management_fib_count--;
+			spin_unlock_irqrestore(&dev->manage_lock, mflags);
+
 			FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
 			if (fib->done == 2) {
+				spin_lock_irqsave(&fib->event_lock, flagv);
+				fib->done = 0;
+				spin_unlock_irqrestore(&fib->event_lock, flagv);
 				aac_fib_complete(fib);
 				aac_fib_free(fib);
 			}
@@ -232,6 +241,7 @@
 
 unsigned int aac_intr_normal(struct aac_dev * dev, u32 index)
 {
+	unsigned long mflags;
 	dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index));
 	if ((index & 0x00000002L)) {
 		struct hw_fib * hw_fib;
@@ -320,11 +330,25 @@
 			unsigned long flagv;
 	  		dprintk((KERN_INFO "event_wait up\n"));
 			spin_lock_irqsave(&fib->event_lock, flagv);
-			if (!fib->done)
+			if (!fib->done) {
 				fib->done = 1;
-			up(&fib->event_wait);
+				up(&fib->event_wait);
+			}
 			spin_unlock_irqrestore(&fib->event_lock, flagv);
+
+			spin_lock_irqsave(&dev->manage_lock, mflags);
+			dev->management_fib_count--;
+			spin_unlock_irqrestore(&dev->manage_lock, mflags);
+
 			FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
+			if (fib->done == 2) {
+				spin_lock_irqsave(&fib->event_lock, flagv);
+				fib->done = 0;
+				spin_unlock_irqrestore(&fib->event_lock, flagv);
+				aac_fib_complete(fib);
+				aac_fib_free(fib);
+			}
+
 		}
 		return 0;
 	}
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 4d419c1..78971db 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -3171,13 +3171,16 @@
 				tinfo->curr.transport_version = 2;
 				tinfo->goal.transport_version = 2;
 				tinfo->goal.ppr_options = 0;
-				/*
-				 * Remove any SCBs in the waiting for selection
-				 * queue that may also be for this target so
-				 * that command ordering is preserved.
-				 */
-				ahd_freeze_devq(ahd, scb);
-				ahd_qinfifo_requeue_tail(ahd, scb);
+				if (scb != NULL) {
+					/*
+					 * Remove any SCBs in the waiting
+					 * for selection queue that may
+					 * also be for this target so that
+					 * command ordering is preserved.
+					 */
+					ahd_freeze_devq(ahd, scb);
+					ahd_qinfifo_requeue_tail(ahd, scb);
+				}
 				printerror = 0;
 			}
 		} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
@@ -3194,13 +3197,16 @@
 				      MSG_EXT_WDTR_BUS_8_BIT,
 				      AHD_TRANS_CUR|AHD_TRANS_GOAL,
 				      /*paused*/TRUE);
-			/*
-			 * Remove any SCBs in the waiting for selection
-			 * queue that may also be for this target so that
-			 * command ordering is preserved.
-			 */
-			ahd_freeze_devq(ahd, scb);
-			ahd_qinfifo_requeue_tail(ahd, scb);
+			if (scb != NULL) {
+				/*
+				 * Remove any SCBs in the waiting for
+				 * selection queue that may also be for
+				 * this target so that command ordering
+				 * is preserved.
+				 */
+				ahd_freeze_devq(ahd, scb);
+				ahd_qinfifo_requeue_tail(ahd, scb);
+			}
 			printerror = 0;
 		} else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
 			&& ppr_busfree == 0) {
@@ -3217,13 +3223,16 @@
 					/*ppr_options*/0,
 					AHD_TRANS_CUR|AHD_TRANS_GOAL,
 					/*paused*/TRUE);
-			/*
-			 * Remove any SCBs in the waiting for selection
-			 * queue that may also be for this target so that
-			 * command ordering is preserved.
-			 */
-			ahd_freeze_devq(ahd, scb);
-			ahd_qinfifo_requeue_tail(ahd, scb);
+			if (scb != NULL) {
+				/*
+				 * Remove any SCBs in the waiting for
+				 * selection queue that may also be for
+				 * this target so that command ordering
+				 * is preserved.
+				 */
+				ahd_freeze_devq(ahd, scb);
+				ahd_qinfifo_requeue_tail(ahd, scb);
+			}
 			printerror = 0;
 		} else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
 			&& ahd_sent_msg(ahd, AHDMSG_1B,
@@ -3251,7 +3260,7 @@
 	 * the message phases.  We check it last in case we
 	 * had to send some other message that caused a busfree.
 	 */
-	if (printerror != 0
+	if (scb != NULL && printerror != 0
 	 && (lastphase == P_MESGIN || lastphase == P_MESGOUT)
 	 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {
 
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 4775426..9e71ac6 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2516,7 +2516,7 @@
 		if (info->scsi.phase == PHASE_IDLE)
 			fas216_kick(info);
 
-		mod_timer(&info->eh_timer, 30 * HZ);
+		mod_timer(&info->eh_timer, jiffies + 30 * HZ);
 		spin_unlock_irqrestore(&info->host_lock, flags);
 
 		/*
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 10be9f3..2f47ae7 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -2009,6 +2009,8 @@
 	fcoe_interface_cleanup(fcoe);
 	rtnl_unlock();
 	fcoe_if_destroy(fcoe->ctlr.lp);
+	module_put(THIS_MODULE);
+
 out_putdev:
 	dev_put(netdev);
 out_nodev:
@@ -2059,6 +2061,11 @@
 	}
 #endif
 
+	if (!try_module_get(THIS_MODULE)) {
+		rc = -EINVAL;
+		goto out_nomod;
+	}
+
 	rtnl_lock();
 	netdev = fcoe_if_to_netdev(buffer);
 	if (!netdev) {
@@ -2099,17 +2106,24 @@
 	if (!fcoe_link_ok(lport))
 		fcoe_ctlr_link_up(&fcoe->ctlr);
 
-	rc = 0;
-out_free:
 	/*
 	 * Release from init in fcoe_interface_create(), on success lport
 	 * should be holding a reference taken in fcoe_if_create().
 	 */
 	fcoe_interface_put(fcoe);
+	dev_put(netdev);
+	rtnl_unlock();
+	mutex_unlock(&fcoe_config_mutex);
+
+	return 0;
+out_free:
+	fcoe_interface_put(fcoe);
 out_putdev:
 	dev_put(netdev);
 out_nodev:
 	rtnl_unlock();
+	module_put(THIS_MODULE);
+out_nomod:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
 }
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 9823291..511cb6b 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -1187,7 +1187,7 @@
 			next_timer = fip->ctlr_ka_time;
 
 		if (time_after_eq(jiffies, fip->port_ka_time)) {
-			fip->port_ka_time += jiffies +
+			fip->port_ka_time = jiffies +
 				msecs_to_jiffies(FIP_VN_KA_PERIOD);
 			fip->send_port_ka = 1;
 		}
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 19d711c..7f43647 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1890,7 +1890,7 @@
 	fc_exch_setup_hdr(ep, fp, ep->f_ctl);
 	sp->cnt++;
 
-	if (ep->xid <= lport->lro_xid)
+	if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
 		fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
 
 	if (unlikely(lport->tt.frame_send(lport, fp)))
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 881d5df..6fde2fab 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -298,9 +298,6 @@
 {
 	struct fc_lport *lport;
 
-	if (!fsp)
-		return;
-
 	lport = fsp->lp;
 	if ((fsp->req_flags & FC_SRB_READ) &&
 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 0b16502..7ec8ce7 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -1800,7 +1800,8 @@
 	u32 did;
 
 	job->reply->reply_payload_rcv_len = 0;
-	rsp->resid_len = job->reply_payload.payload_len;
+	if (rsp)
+		rsp->resid_len = job->reply_payload.payload_len;
 
 	mutex_lock(&lport->lp_mutex);
 
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 0230052..97923bb 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -623,7 +623,7 @@
 
 		tov = ntohl(plp->fl_csp.sp_e_d_tov);
 		if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR)
-			tov /= 1000;
+			tov /= 1000000;
 		if (tov > rdata->e_d_tov)
 			rdata->e_d_tov = tov;
 		csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index db6856c..4ad87fd 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -992,12 +992,10 @@
 		if (r2t == NULL) {
 			if (kfifo_out(&tcp_task->r2tqueue,
 			    (void *)&tcp_task->r2t, sizeof(void *)) !=
-			    sizeof(void *)) {
-				WARN_ONCE(1, "unexpected fifo state");
+			    sizeof(void *))
 				r2t = NULL;
-			}
-
-			r2t = tcp_task->r2t;
+			else
+				r2t = tcp_task->r2t;
 		}
 		spin_unlock_bh(&session->lock);
 	}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
old mode 100755
new mode 100644
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
old mode 100755
new mode 100644
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 708ea31..d9b8ca5 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -3781,6 +3781,7 @@
 	    compat_alloc_user_space(sizeof(struct megasas_iocpacket));
 	int i;
 	int error = 0;
+	compat_uptr_t ptr;
 
 	if (clear_user(ioc, sizeof(*ioc)))
 		return -EFAULT;
@@ -3793,9 +3794,22 @@
 	    copy_in_user(&ioc->sge_count, &cioc->sge_count, sizeof(u32)))
 		return -EFAULT;
 
-	for (i = 0; i < MAX_IOCTL_SGE; i++) {
-		compat_uptr_t ptr;
+	/*
+	 * The sense_ptr is used in megasas_mgmt_fw_ioctl only when
+	 * sense_len is not null, so prepare the 64bit value under
+	 * the same condition.
+	 */
+	if (ioc->sense_len) {
+		void __user **sense_ioc_ptr =
+			(void __user **)(ioc->frame.raw + ioc->sense_off);
+		compat_uptr_t *sense_cioc_ptr =
+			(compat_uptr_t *)(cioc->frame.raw + cioc->sense_off);
+		if (get_user(ptr, sense_cioc_ptr) ||
+		    put_user(compat_ptr(ptr), sense_ioc_ptr))
+			return -EFAULT;
+	}
 
+	for (i = 0; i < MAX_IOCTL_SGE; i++) {
 		if (get_user(ptr, &cioc->sgl[i].iov_base) ||
 		    put_user(compat_ptr(ptr), &ioc->sgl[i].iov_base) ||
 		    copy_in_user(&ioc->sgl[i].iov_len,
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 608e675..1263d97 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1586,8 +1586,7 @@
  */
 #define FCF_FABRIC_DEVICE	BIT_0
 #define FCF_LOGIN_NEEDED	BIT_1
-#define FCF_TAPE_PRESENT	BIT_2
-#define FCF_FCP2_DEVICE		BIT_3
+#define FCF_FCP2_DEVICE		BIT_2
 
 /* No loop ID flag. */
 #define FC_NO_LOOP_ID		0x1000
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f61fb8d..8bc6f53 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -453,6 +453,5 @@
 extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
 extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
-extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *);
 
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b4a0eac..3f8e849 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -205,7 +205,7 @@
 
 	switch (data[0]) {
 	case MBS_COMMAND_COMPLETE:
-		if (fcport->flags & FCF_TAPE_PRESENT)
+		if (fcport->flags & FCF_FCP2_DEVICE)
 			opts |= BIT_1;
 		rval = qla2x00_get_port_database(vha, fcport, opts);
 		if (rval != QLA_SUCCESS)
@@ -2726,7 +2726,7 @@
 
 		/*
 		 * Logout all previous fabric devices marked lost, except
-		 * tape devices.
+		 * FCP2 devices.
 		 */
 		list_for_each_entry(fcport, &vha->vp_fcports, list) {
 			if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
@@ -2739,7 +2739,7 @@
 				qla2x00_mark_device_lost(vha, fcport,
 				    ql2xplogiabsentdevice, 0);
 				if (fcport->loop_id != FC_NO_LOOP_ID &&
-				    (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
+				    (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
 				    fcport->port_type != FCT_INITIATOR &&
 				    fcport->port_type != FCT_BROADCAST) {
 					ha->isp_ops->fabric_logout(vha,
@@ -3018,7 +3018,7 @@
 			fcport->d_id.b24 = new_fcport->d_id.b24;
 			fcport->flags |= FCF_LOGIN_NEEDED;
 			if (fcport->loop_id != FC_NO_LOOP_ID &&
-			    (fcport->flags & FCF_TAPE_PRESENT) == 0 &&
+			    (fcport->flags & FCF_FCP2_DEVICE) == 0 &&
 			    fcport->port_type != FCT_INITIATOR &&
 			    fcport->port_type != FCT_BROADCAST) {
 				ha->isp_ops->fabric_logout(vha, fcport->loop_id,
@@ -3272,9 +3272,9 @@
 
 	rval = qla2x00_fabric_login(vha, fcport, next_loopid);
 	if (rval == QLA_SUCCESS) {
-		/* Send an ADISC to tape devices.*/
+		/* Send an ADISC to FCP2 devices.*/
 		opts = 0;
-		if (fcport->flags & FCF_TAPE_PRESENT)
+		if (fcport->flags & FCF_FCP2_DEVICE)
 			opts |= BIT_1;
 		rval = qla2x00_get_port_database(vha, fcport, opts);
 		if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ffd0efd..6fc63b9 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1917,6 +1917,7 @@
 	struct rsp_que *rsp;
 	struct device_reg_24xx __iomem *reg;
 	struct scsi_qla_host *vha;
+	unsigned long flags;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1927,15 +1928,15 @@
 	ha = rsp->hw;
 	reg = &ha->iobase->isp24;
 
-	spin_lock_irq(&ha->hardware_lock);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 
-	vha = qla25xx_get_host(rsp);
+	vha = pci_get_drvdata(ha->pdev);
 	qla24xx_process_response_queue(vha, rsp);
 	if (!ha->flags.disable_msix_handshake) {
 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 		RD_REG_DWORD_RELAXED(&reg->hccr);
 	}
-	spin_unlock_irq(&ha->hardware_lock);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	return IRQ_HANDLED;
 }
@@ -1946,6 +1947,7 @@
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
 	struct device_reg_24xx __iomem *reg;
+	unsigned long flags;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1958,10 +1960,10 @@
 	/* Clear the interrupt, if enabled, for this response queue */
 	if (rsp->options & ~BIT_6) {
 		reg = &ha->iobase->isp24;
-		spin_lock_irq(&ha->hardware_lock);
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 		RD_REG_DWORD_RELAXED(&reg->hccr);
-		spin_unlock_irq(&ha->hardware_lock);
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	}
 	queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
 
@@ -1979,6 +1981,7 @@
 	uint32_t	stat;
 	uint32_t	hccr;
 	uint16_t	mb[4];
+	unsigned long flags;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -1990,7 +1993,7 @@
 	reg = &ha->iobase->isp24;
 	status = 0;
 
-	spin_lock_irq(&ha->hardware_lock);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	vha = pci_get_drvdata(ha->pdev);
 	do {
 		stat = RD_REG_DWORD(&reg->host_status);
@@ -2039,7 +2042,7 @@
 		}
 		WRT_REG_DWORD(&reg->hccr, HCCRX_CLR_RISC_INT);
 	} while (0);
-	spin_unlock_irq(&ha->hardware_lock);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
 	    (status & MBX_INTERRUPT) && ha->flags.mbox_int) {
@@ -2277,30 +2280,3 @@
 	msix->rsp = rsp;
 	return ret;
 }
-
-struct scsi_qla_host *
-qla25xx_get_host(struct rsp_que *rsp)
-{
-	srb_t *sp;
-	struct qla_hw_data *ha = rsp->hw;
-	struct scsi_qla_host *vha = NULL;
-	struct sts_entry_24xx *pkt;
-	struct req_que *req;
-	uint16_t que;
-	uint32_t handle;
-
-	pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
-	que = MSW(pkt->handle);
-	handle = (uint32_t) LSW(pkt->handle);
-	req = ha->req_q_map[que];
-	if (handle < MAX_OUTSTANDING_COMMANDS) {
-		sp = req->outstanding_cmds[handle];
-		if (sp)
-			return  sp->fcport->vha;
-		else
-			goto base_que;
-	}
-base_que:
-	vha = pci_get_drvdata(ha->pdev);
-	return vha;
-}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index b901aa2..ff17dee 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -636,13 +636,15 @@
 
 static void qla_do_work(struct work_struct *work)
 {
+	unsigned long flags;
 	struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
 	struct scsi_qla_host *vha;
+	struct qla_hw_data *ha = rsp->hw;
 
-	spin_lock_irq(&rsp->hw->hardware_lock);
-	vha = qla25xx_get_host(rsp);
+	spin_lock_irqsave(&rsp->hw->hardware_lock, flags);
+	vha = pci_get_drvdata(ha->pdev);
 	qla24xx_process_response_queue(vha, rsp);
-	spin_unlock_irq(&rsp->hw->hardware_lock);
+	spin_unlock_irqrestore(&rsp->hw->hardware_lock, flags);
 }
 
 /* create response queue */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 209f50e..8529eb1 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1188,7 +1188,6 @@
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct qla_hw_data *ha = vha->hw;
 	struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
-	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 	struct req_que *req = vha->req;
 
 	if (sdev->tagged_supported)
@@ -1197,8 +1196,6 @@
 		scsi_deactivate_tcq(sdev, req->max_q_depth);
 
 	rport->dev_loss_tmo = ha->port_down_retry_count;
-	if (sdev->type == TYPE_TAPE)
-		fcport->flags |= FCF_TAPE_PRESENT;
 
 	return 0;
 }
@@ -2805,7 +2802,7 @@
 
 			fcport->login_retry--;
 			if (fcport->flags & FCF_FABRIC_DEVICE) {
-				if (fcport->flags & FCF_TAPE_PRESENT)
+				if (fcport->flags & FCF_FCP2_DEVICE)
 					ha->isp_ops->fabric_logout(vha,
 							fcport->loop_id,
 							fcport->d_id.b.domain,
@@ -3141,7 +3138,10 @@
 			if (!IS_QLA2100(ha) && vha->link_down_timeout)
 				atomic_set(&vha->loop_state, LOOP_DEAD);
 
-			/* Schedule an ISP abort to return any tape commands. */
+			/*
+			 * Schedule an ISP abort to return any FCP2-device
+			 * commands.
+			 */
 			/* NPIV - scan physical port only */
 			if (!vha->vp_idx) {
 				spin_lock_irqsave(&ha->hardware_lock,
@@ -3158,7 +3158,7 @@
 					if (sp->ctx)
 						continue;
 					sfcp = sp->fcport;
-					if (!(sfcp->flags & FCF_TAPE_PRESENT))
+					if (!(sfcp->flags & FCF_FCP2_DEVICE))
 						continue;
 
 					set_bit(ISP_ABORT_NEEDED,
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 010e69b..371dc89 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -2292,11 +2292,14 @@
 	uint32_t faddr, left, burst;
 	struct qla_hw_data *ha = vha->hw;
 
+	if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
+		goto try_fast;
 	if (offset & 0xfff)
 		goto slow_read;
 	if (length < OPTROM_BURST_SIZE)
 		goto slow_read;
 
+try_fast:
 	optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
 	    &optrom_dma, GFP_KERNEL);
 	if (!optrom) {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index a65dd95..ed36279 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.01-k9"
+#define QLA2XXX_VERSION      "8.03.01-k10"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d892768..c664242 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -749,9 +749,9 @@
 			 */
 			req->next_rq->resid_len = scsi_in(cmd)->resid;
 
+			scsi_release_buffers(cmd);
 			blk_end_request_all(req, 0);
 
-			scsi_release_buffers(cmd);
 			scsi_next_command(cmd);
 			return;
 		}
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index ddfcecd..653f22a 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -3527,7 +3527,10 @@
 	if (!done && i->f->bsg_timeout) {
 		/* call LLDD to abort the i/o as it has timed out */
 		err = i->f->bsg_timeout(job);
-		if (err)
+		if (err == -EAGAIN) {
+			job->ref_cnt--;
+			return BLK_EH_RESET_TIMER;
+		} else if (err)
 			printk(KERN_ERR "ERROR: FC BSG request timeout - LLD "
 				"abort failed with status %d\n", err);
 	}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index c3e37c8e..e9b15c3 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -83,6 +83,9 @@
 
 #define PASS_LIMIT	256
 
+#define BOTH_EMPTY 	(UART_LSR_TEMT | UART_LSR_THRE)
+
+
 /*
  * We default to IRQ0 for the "no irq" hack.   Some
  * machine types want others as well - they're free
@@ -1792,7 +1795,7 @@
 	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
-	return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+	return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
@@ -1850,8 +1853,6 @@
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
 /*
  *	Wait for transmitter & holding register to empty
  */
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 36ede02..24485cc 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -328,15 +328,7 @@
 	/* U.S. Robotics 56K Voice INT PnP*/
 	{	"USR9190",		0	},
 	/* Wacom tablets */
-	{	"WACF004",		0	},
-	{	"WACF005",		0	},
-	{       "WACF006",              0       },
-	{       "WACF007",              0       },
-	{       "WACF008",              0       },
-	{       "WACF009",              0       },
-	{       "WACF00A",              0       },
-	{       "WACF00B",              0       },
-	{       "WACF00C",              0       },
+	{	"WACFXXX",		0	},
 	/* Compaq touchscreen */
 	{       "FPI2002",              0 },
 	/* Fujitsu Stylistic touchscreens */
@@ -354,6 +346,8 @@
 	{	"FUJ02E5",		0	},
 	/* Fujitsu P-series tablet PC device */
 	{	"FUJ02E6",		0	},
+	/* Fujitsu Wacom 2FGT Tablet PC device */
+	{	"FUJ02E7",		0	},
 	/*
 	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
 	 * disguise)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 18130f1..60d665a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1088,7 +1088,7 @@
 			   int *parity, int *bits)
 {
 
-	if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
+	if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
 		/* ok, the port was enabled */
 		unsigned int ucr2, ubir,ubmr, uartclk;
 		unsigned int baud_raw;
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0700cd1..683e66f 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -411,6 +411,17 @@
 		goto ack_tx_int;
 	}
 
+	/* Under some circumstances, we see interrupts reported for
+	 * a closed channel. The interrupt mask in R1 is clear, but
+	 * R3 still signals the interrupts and we see them when taking
+	 * an interrupt for the other channel (this could be a qemu
+	 * bug but since the ESCC doc doesn't specify precsiely whether
+	 * R3 interrup status bits are masked by R1 interrupt enable
+	 * bits, better safe than sorry). --BenH.
+	 */
+	if (!ZS_IS_OPEN(uap))
+		goto ack_tx_int;
+
 	if (uap->port.x_char) {
 		uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
 		write_zsdata(uap, uap->port.x_char);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 047530b..7f28307 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -385,13 +385,20 @@
 		}
 
 		/*
-		 * As a last resort, if the quotient is zero,
-		 * default to 9600 bps
+		 * As a last resort, if the range cannot be met then clip to
+		 * the nearest chip supported rate.
 		 */
-		if (!hung_up)
-			tty_termios_encode_baud_rate(termios, 9600, 9600);
+		if (!hung_up) {
+			if (baud <= min)
+				tty_termios_encode_baud_rate(termios,
+							min + 1, min + 1);
+			else
+				tty_termios_encode_baud_rate(termios,
+							max - 1, max - 1);
+		}
 	}
-
+	/* Should never happen */
+	WARN_ON(1);
 	return 0;
 }
 
@@ -2006,12 +2013,6 @@
 
 	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(uport)) {
-		/* we're going to avoid suspending serial console */
-		mutex_unlock(&port->mutex);
-		return 0;
-	}
-
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
 		enable_irq_wake(uport->irq);
@@ -2019,20 +2020,23 @@
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
-	uport->suspended = 1;
+	if (console_suspend_enabled || !uart_console(uport))
+		uport->suspended = 1;
 
 	if (port->flags & ASYNC_INITIALIZED) {
 		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		set_bit(ASYNCB_SUSPENDED, &port->flags);
-		clear_bit(ASYNCB_INITIALIZED, &port->flags);
+		if (console_suspend_enabled || !uart_console(uport)) {
+			set_bit(ASYNCB_SUSPENDED, &port->flags);
+			clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&uport->lock);
-		ops->stop_tx(uport);
-		ops->set_mctrl(uport, 0);
-		ops->stop_rx(uport);
-		spin_unlock_irq(&uport->lock);
+			spin_lock_irq(&uport->lock);
+			ops->stop_tx(uport);
+			ops->set_mctrl(uport, 0);
+			ops->stop_rx(uport);
+			spin_unlock_irq(&uport->lock);
+		}
 
 		/*
 		 * Wait for the transmitter to empty.
@@ -2047,16 +2051,18 @@
 			       drv->dev_name,
 			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(uport);
+		if (console_suspend_enabled || !uart_console(uport))
+			ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(uport))
+	if (console_suspend_enabled && uart_console(uport))
 		console_stop(uport->cons);
 
-	uart_change_pm(state, 3);
+	if (console_suspend_enabled || !uart_console(uport))
+		uart_change_pm(state, 3);
 
 	mutex_unlock(&port->mutex);
 
@@ -2073,29 +2079,6 @@
 
 	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(uport)) {
-		/* no need to resume serial console, it wasn't suspended */
-		/*
-		 * First try to use the console cflag setting.
-		 */
-		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = uport->cons->cflag;
-		/*
-		 * If that's unset, use the tty termios setting.
-		 */
-		if (termios.c_cflag == 0)
-			termios = *state->port.tty->termios;
-		else {
-			termios.c_ispeed = termios.c_ospeed =
-				tty_termios_input_baud_rate(&termios);
-			termios.c_ispeed = termios.c_ospeed =
-				tty_termios_baud_rate(&termios);
-		}
-		uport->ops->set_termios(uport, &termios, NULL);
-		mutex_unlock(&port->mutex);
-		return 0;
-	}
-
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (!uport->suspended && device_may_wakeup(tty_dev)) {
 		disable_irq_wake(uport->irq);
@@ -2121,21 +2104,23 @@
 		spin_lock_irq(&uport->lock);
 		ops->set_mctrl(uport, 0);
 		spin_unlock_irq(&uport->lock);
-		ret = ops->startup(uport);
-		if (ret == 0) {
-			uart_change_speed(state, NULL);
-			spin_lock_irq(&uport->lock);
-			ops->set_mctrl(uport, uport->mctrl);
-			ops->start_tx(uport);
-			spin_unlock_irq(&uport->lock);
-			set_bit(ASYNCB_INITIALIZED, &port->flags);
-		} else {
-			/*
-			 * Failed to resume - maybe hardware went away?
-			 * Clear the "initialized" flag so we won't try
-			 * to call the low level drivers shutdown method.
-			 */
-			uart_shutdown(state);
+		if (console_suspend_enabled || !uart_console(uport)) {
+			ret = ops->startup(uport);
+			if (ret == 0) {
+				uart_change_speed(state, NULL);
+				spin_lock_irq(&uport->lock);
+				ops->set_mctrl(uport, uport->mctrl);
+				ops->start_tx(uport);
+				spin_unlock_irq(&uport->lock);
+				set_bit(ASYNCB_INITIALIZED, &port->flags);
+			} else {
+				/*
+				 * Failed to resume - maybe hardware went away?
+				 * Clear the "initialized" flag so we won't try
+				 * to call the low level drivers shutdown method.
+				 */
+				uart_shutdown(state);
+			}
 		}
 
 		clear_bit(ASYNCB_SUSPENDED, &port->flags);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 0ee7239..95421fa 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -146,7 +146,8 @@
 {
 	struct serial_info *info = link->priv;
 
-	outb(12, info->c950ctrl + 1);
+	if (info->c950ctrl)
+		outb(12, info->c950ctrl + 1);
 }
 
 /* request_region? oxsemi branch does no request_region too... */
@@ -757,6 +758,7 @@
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
 	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 37f0de9..42f3333 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1052,7 +1052,18 @@
 	sci_port->port.ops	= &sci_uart_ops;
 	sci_port->port.iotype	= UPIO_MEM;
 	sci_port->port.line	= index;
-	sci_port->port.fifosize	= 1;
+
+	switch (p->type) {
+	case PORT_SCIFA:
+		sci_port->port.fifosize = 64;
+		break;
+	case PORT_SCIF:
+		sci_port->port.fifosize = 16;
+		break;
+	default:
+		sci_port->port.fifosize = 1;
+		break;
+	}
 
 	if (dev) {
 		sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 377f271..ab2ab3c 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -394,7 +394,7 @@
 		spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static int __init ulite_console_setup(struct console *co, char *options)
+static int __devinit ulite_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
 	int baud = 9600;
diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c
index 51e5e1d..30973ec 100644
--- a/drivers/spi/spi_sh_msiof.c
+++ b/drivers/spi/spi_sh_msiof.c
@@ -173,15 +173,12 @@
 	int edge;
 
 	/*
-	 * CPOL CPHA     TSCKIZ RSCKIZ TEDG REDG(!)
-	 *    0    0         10     10    1    0
-	 *    0    1         10     10    0    1
-	 *    1    0         11     11    0    1
-	 *    1    1         11     11    1    0
-	 *
-	 * (!) Note: REDG is inverted recommended data sheet setting
+	 * CPOL CPHA     TSCKIZ RSCKIZ TEDG REDG
+	 *    0    0         10     10    1    1
+	 *    0    1         10     10    0    0
+	 *    1    0         11     11    0    0
+	 *    1    1         11     11    1    1
 	 */
-
 	sh_msiof_write(p, FCTR, 0);
 	sh_msiof_write(p, TMDR1, 0xe2000005 | (lsb_first << 24));
 	sh_msiof_write(p, RMDR1, 0x22000005 | (lsb_first << 24));
@@ -193,7 +190,7 @@
 	edge = cpol ? cpha : !cpha;
 
 	tmp |= edge << 27; /* TEDG */
-	tmp |= !edge << 26; /* REDG */
+	tmp |= edge << 26; /* REDG */
 	tmp |= (tx_hi_z ? 2 : 0) << 22; /* TXDIZ */
 	sh_msiof_write(p, CTR, tmp);
 }
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 5681ebe..03dfd27 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -494,8 +494,7 @@
 #endif
 			break;
 		case SSB_BUSTYPE_SDIO:
-#ifdef CONFIG_SSB_SDIO
-			sdev->irq = bus->host_sdio->dev.irq;
+#ifdef CONFIG_SSB_SDIOHOST
 			dev->parent = &bus->host_sdio->dev;
 #endif
 			break;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 94eb863..fc2e963 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -99,8 +99,6 @@
 
 source "drivers/gpu/drm/vmwgfx/Kconfig"
 
-source "drivers/gpu/drm/radeon/Kconfig"
-
 source "drivers/gpu/drm/nouveau/Kconfig"
 
 source "drivers/staging/octeon/Kconfig"
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index f4c2657..43c57b7 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -194,9 +194,11 @@
 {
 	struct usb_interface *intf = to_usb_interface(dev);
 	struct asus_oled_dev *odev = usb_get_intfdata(intf);
-	int temp = strict_strtoul(buf, 10, NULL);
+	unsigned long value;
+	if (strict_strtoul(buf, 10, &value))
+		return -EINVAL;
 
-	enable_oled(odev, temp);
+	enable_oled(odev, value);
 
 	return count;
 }
@@ -207,10 +209,12 @@
 {
 	struct asus_oled_dev *odev =
 		(struct asus_oled_dev *) dev_get_drvdata(device);
+	unsigned long value;
 
-	int temp = strict_strtoul(buf, 10, NULL);
+	if (strict_strtoul(buf, 10, &value))
+		return -EINVAL;
 
-	enable_oled(odev, temp);
+	enable_oled(odev, value);
 
 	return count;
 }
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c
index e4df813..1eb079b 100644
--- a/drivers/staging/cx25821/cx25821-medusa-video.c
+++ b/drivers/staging/cx25821/cx25821-medusa-video.c
@@ -860,10 +860,8 @@
 
 	ret_val = medusa_set_videostandard(dev);
 
-	if (ret_val < 0) {
-		mutex_unlock(&dev->lock);
+	if (ret_val < 0)
 		return -EINVAL;
-	}
 
 	return 1;
 }
diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h
index 6da843c..e715e4d 100644
--- a/drivers/staging/et131x/et1310_address_map.h
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -203,11 +203,14 @@
  * 9-0: pr ndes
  */
 
-#define ET_DMA10_MASK		0x3FF	/* 10 bit mask for DMA10W types */
-#define ET_DMA10_WRAP		0x400
-#define ET_DMA4_MASK		0x00F	/* 4 bit mask for DMA4W types */
-#define ET_DMA4_WRAP		0x010
+#define ET_DMA12_MASK		0x0FFF	/* 12 bit mask for DMA12W types */
+#define ET_DMA12_WRAP		0x1000
+#define ET_DMA10_MASK		0x03FF	/* 10 bit mask for DMA10W types */
+#define ET_DMA10_WRAP		0x0400
+#define ET_DMA4_MASK		0x000F	/* 4 bit mask for DMA4W types */
+#define ET_DMA4_WRAP		0x0010
 
+#define INDEX12(x)	((x) & ET_DMA12_MASK)
 #define INDEX10(x)	((x) & ET_DMA10_MASK)
 #define INDEX4(x)	((x) & ET_DMA4_MASK)
 
@@ -216,6 +219,11 @@
 	*v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
 }
 
+extern inline void add_12bit(u32 *v, int n)
+{
+	*v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP);
+}
+
 /*
  * 10bit DMA with wrap
  * txdma tx queue write address reg in txdma address map at 0x1010
diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c
index 3ddc9b1..81c1a74 100644
--- a/drivers/staging/et131x/et1310_rx.c
+++ b/drivers/staging/et131x/et1310_rx.c
@@ -831,10 +831,10 @@
 
 	/* Indicate that we have used this PSR entry. */
 	/* FIXME wrap 12 */
-	rx_local->local_psr_full = (rx_local->local_psr_full + 1) & 0xFFF;
-	if (rx_local->local_psr_full  > rx_local->PsrNumEntries - 1) {
+	add_12bit(&rx_local->local_psr_full, 1);
+	if ((rx_local->local_psr_full & 0xFFF)  > rx_local->PsrNumEntries - 1) {
 		/* Clear psr full and toggle the wrap bit */
-		rx_local->local_psr_full &=  0xFFF;
+		rx_local->local_psr_full &=  ~0xFFF;
 		rx_local->local_psr_full ^= 0x1000;
 	}
 
diff --git a/drivers/staging/hv/Hv.c b/drivers/staging/hv/Hv.c
index c5b6613..c2809f2 100644
--- a/drivers/staging/hv/Hv.c
+++ b/drivers/staging/hv/Hv.c
@@ -386,7 +386,7 @@
  * retrieve the initialized message and event pages.  Otherwise, we create and
  * initialize the message and event pages.
  */
-int HvSynicInit(u32 irqVector)
+void HvSynicInit(void *irqarg)
 {
 	u64 version;
 	union hv_synic_simp simp;
@@ -394,13 +394,14 @@
 	union hv_synic_sint sharedSint;
 	union hv_synic_scontrol sctrl;
 	u64 guestID;
-	int ret = 0;
+	u32 irqVector = *((u32 *)(irqarg));
+	int cpu = smp_processor_id();
 
 	DPRINT_ENTER(VMBUS);
 
 	if (!gHvContext.HypercallPage) {
 		DPRINT_EXIT(VMBUS);
-		return ret;
+		return;
 	}
 
 	/* Check the version */
@@ -425,27 +426,27 @@
 		 */
 		rdmsrl(HV_X64_MSR_GUEST_OS_ID, guestID);
 		if (guestID == HV_LINUX_GUEST_ID) {
-			gHvContext.synICMessagePage[0] =
+			gHvContext.synICMessagePage[cpu] =
 				phys_to_virt(simp.BaseSimpGpa << PAGE_SHIFT);
-			gHvContext.synICEventPage[0] =
+			gHvContext.synICEventPage[cpu] =
 				phys_to_virt(siefp.BaseSiefpGpa << PAGE_SHIFT);
 		} else {
 			DPRINT_ERR(VMBUS, "unknown guest id!!");
 			goto Cleanup;
 		}
 		DPRINT_DBG(VMBUS, "MAPPED: Simp: %p, Sifep: %p",
-			   gHvContext.synICMessagePage[0],
-			   gHvContext.synICEventPage[0]);
+			   gHvContext.synICMessagePage[cpu],
+			   gHvContext.synICEventPage[cpu]);
 	} else {
-		gHvContext.synICMessagePage[0] = osd_PageAlloc(1);
-		if (gHvContext.synICMessagePage[0] == NULL) {
+		gHvContext.synICMessagePage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC);
+		if (gHvContext.synICMessagePage[cpu] == NULL) {
 			DPRINT_ERR(VMBUS,
 				   "unable to allocate SYNIC message page!!");
 			goto Cleanup;
 		}
 
-		gHvContext.synICEventPage[0] = osd_PageAlloc(1);
-		if (gHvContext.synICEventPage[0] == NULL) {
+		gHvContext.synICEventPage[cpu] = (void *)get_zeroed_page(GFP_ATOMIC);
+		if (gHvContext.synICEventPage[cpu] == NULL) {
 			DPRINT_ERR(VMBUS,
 				   "unable to allocate SYNIC event page!!");
 			goto Cleanup;
@@ -454,7 +455,7 @@
 		/* Setup the Synic's message page */
 		rdmsrl(HV_X64_MSR_SIMP, simp.AsUINT64);
 		simp.SimpEnabled = 1;
-		simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[0])
+		simp.BaseSimpGpa = virt_to_phys(gHvContext.synICMessagePage[cpu])
 					>> PAGE_SHIFT;
 
 		DPRINT_DBG(VMBUS, "HV_X64_MSR_SIMP msr set to: %llx",
@@ -465,7 +466,7 @@
 		/* Setup the Synic's event page */
 		rdmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64);
 		siefp.SiefpEnabled = 1;
-		siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[0])
+		siefp.BaseSiefpGpa = virt_to_phys(gHvContext.synICEventPage[cpu])
 					>> PAGE_SHIFT;
 
 		DPRINT_DBG(VMBUS, "HV_X64_MSR_SIEFP msr set to: %llx",
@@ -501,32 +502,30 @@
 
 	DPRINT_EXIT(VMBUS);
 
-	return ret;
+	return;
 
 Cleanup:
-	ret = -1;
-
 	if (gHvContext.GuestId == HV_LINUX_GUEST_ID) {
-		if (gHvContext.synICEventPage[0])
-			osd_PageFree(gHvContext.synICEventPage[0], 1);
+		if (gHvContext.synICEventPage[cpu])
+			osd_PageFree(gHvContext.synICEventPage[cpu], 1);
 
-		if (gHvContext.synICMessagePage[0])
-			osd_PageFree(gHvContext.synICMessagePage[0], 1);
+		if (gHvContext.synICMessagePage[cpu])
+			osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
 	}
 
 	DPRINT_EXIT(VMBUS);
-
-	return ret;
+	return;
 }
 
 /**
  * HvSynicCleanup - Cleanup routine for HvSynicInit().
  */
-void HvSynicCleanup(void)
+void HvSynicCleanup(void *arg)
 {
 	union hv_synic_sint sharedSint;
 	union hv_synic_simp simp;
 	union hv_synic_siefp siefp;
+	int cpu = smp_processor_id();
 
 	DPRINT_ENTER(VMBUS);
 
@@ -539,6 +538,7 @@
 
 	sharedSint.Masked = 1;
 
+	/* Need to correctly cleanup in the case of SMP!!! */
 	/* Disable the interrupt */
 	wrmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, sharedSint.AsUINT64);
 
@@ -560,8 +560,8 @@
 
 		wrmsrl(HV_X64_MSR_SIEFP, siefp.AsUINT64);
 
-		osd_PageFree(gHvContext.synICMessagePage[0], 1);
-		osd_PageFree(gHvContext.synICEventPage[0], 1);
+		osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
+		osd_PageFree(gHvContext.synICEventPage[cpu], 1);
 	}
 
 	DPRINT_EXIT(VMBUS);
diff --git a/drivers/staging/hv/Hv.h b/drivers/staging/hv/Hv.h
index 5379e4b..fce4b5c 100644
--- a/drivers/staging/hv/Hv.h
+++ b/drivers/staging/hv/Hv.h
@@ -93,7 +93,7 @@
 	},
 };
 
-#define MAX_NUM_CPUS	1
+#define MAX_NUM_CPUS	32
 
 
 struct hv_input_signal_event_buffer {
@@ -137,8 +137,8 @@
 
 extern u16 HvSignalEvent(void);
 
-extern int HvSynicInit(u32 irqVector);
+extern void HvSynicInit(void *irqarg);
 
-extern void HvSynicCleanup(void);
+extern void HvSynicCleanup(void *arg);
 
 #endif /* __HV_H__ */
diff --git a/drivers/staging/hv/Vmbus.c b/drivers/staging/hv/Vmbus.c
index a4dd06f..35a023e 100644
--- a/drivers/staging/hv/Vmbus.c
+++ b/drivers/staging/hv/Vmbus.c
@@ -129,7 +129,7 @@
 
 	/* strcpy(dev->name, "vmbus"); */
 	/* SynIC setup... */
-	ret = HvSynicInit(*irqvector);
+	on_each_cpu(HvSynicInit, (void *)irqvector, 1);
 
 	/* Connect to VMBus in the root partition */
 	ret = VmbusConnect();
@@ -150,7 +150,7 @@
 	DPRINT_ENTER(VMBUS);
 	VmbusChannelReleaseUnattachedChannels();
 	VmbusDisconnect();
-	HvSynicCleanup();
+	on_each_cpu(HvSynicCleanup, NULL, 1);
 	DPRINT_EXIT(VMBUS);
 
 	return ret;
@@ -173,7 +173,8 @@
  */
 static void VmbusOnMsgDPC(struct hv_driver *drv)
 {
-	void *page_addr = gHvContext.synICMessagePage[0];
+	int cpu = smp_processor_id();
+	void *page_addr = gHvContext.synICMessagePage[cpu];
 	struct hv_message *msg = (struct hv_message *)page_addr +
 				  VMBUS_MESSAGE_SINT;
 	struct hv_message *copied;
@@ -230,11 +231,12 @@
 static int VmbusOnISR(struct hv_driver *drv)
 {
 	int ret = 0;
+	int cpu = smp_processor_id();
 	void *page_addr;
 	struct hv_message *msg;
 	union hv_synic_event_flags *event;
 
-	page_addr = gHvContext.synICMessagePage[0];
+	page_addr = gHvContext.synICMessagePage[cpu];
 	msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT;
 
 	DPRINT_ENTER(VMBUS);
@@ -248,7 +250,7 @@
 	}
 
 	/* TODO: Check if there are events to be process */
-	page_addr = gHvContext.synICEventPage[0];
+	page_addr = gHvContext.synICEventPage[cpu];
 	event = (union hv_synic_event_flags *)page_addr + VMBUS_MESSAGE_SINT;
 
 	/* Since we are a child, we only need to check bit 0 */
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 96f1171..355dffc 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -494,7 +494,7 @@
 		return 0;
 	/* allocate 2^1 pages = 8K (on i386);
 	 * should be more than enough for one device */
-	pages_start = (char *)__get_free_pages(GFP_KERNEL, 1);
+	pages_start = (char *)__get_free_pages(GFP_NOIO, 1);
 	if (!pages_start)
 		return -ENOMEM;
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6e8bcdf..a678186 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1312,9 +1312,9 @@
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			goto err_out;
 	if (put_user(as->status, &userurb->status))
 		goto err_out;
@@ -1334,14 +1334,11 @@
 		}
 	}
 
-	free_async(as);
-
 	if (put_user(addr, (void __user * __user *)arg))
 		return -EFAULT;
 	return 0;
 
 err_out:
-	free_async(as);
 	return -EFAULT;
 }
 
@@ -1371,8 +1368,11 @@
 static int proc_reapurb(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1380,11 +1380,16 @@
 
 static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl(as, (void __user * __user *)arg);
+	as = async_getcompleted(ps);
+	retval = -EAGAIN;
+	if (as) {
+		retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 #ifdef CONFIG_COMPAT
@@ -1475,9 +1480,9 @@
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			return -EFAULT;
 	if (put_user(as->status, &userurb->status))
 		return -EFAULT;
@@ -1497,7 +1502,6 @@
 		}
 	}
 
-	free_async(as);
 	if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
 		return -EFAULT;
 	return 0;
@@ -1506,8 +1510,11 @@
 static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl_compat(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1515,11 +1522,16 @@
 
 static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl_compat(as, (void __user * __user *)arg);
+	retval = -EAGAIN;
+	as = async_getcompleted(ps);
+	if (as) {
+		retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 0495fa6..80995ef 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1684,6 +1684,24 @@
 		}
 	}
 	if (cur_alt && new_alt) {
+		struct usb_interface *iface = usb_ifnum_to_if(udev,
+				cur_alt->desc.bInterfaceNumber);
+
+		if (iface->resetting_device) {
+			/*
+			 * The USB core just reset the device, so the xHCI host
+			 * and the device will think alt setting 0 is installed.
+			 * However, the USB core will pass in the alternate
+			 * setting installed before the reset as cur_alt.  Dig
+			 * out the alternate setting 0 structure, or the first
+			 * alternate setting if a broken device doesn't have alt
+			 * setting 0.
+			 */
+			cur_alt = usb_altnum_to_altsetting(iface, 0);
+			if (!cur_alt)
+				cur_alt = &iface->altsetting[0];
+		}
+
 		/* Drop all the endpoints in the current alt setting */
 		for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
 			ret = hcd->driver->drop_endpoint(hcd, udev,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0cec6ca..35cc8b9 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3347,6 +3347,9 @@
 					USB_PORT_FEAT_C_SUSPEND);
 				udev = hdev->children[i-1];
 				if (udev) {
+					/* TRSMRCY = 10 msec */
+					msleep(10);
+
 					usb_lock_device(udev);
 					ret = remote_wakeup(hdev->
 							children[i-1]);
@@ -3692,19 +3695,14 @@
 			usb_enable_interface(udev, intf, true);
 			ret = 0;
 		} else {
-			/* We've just reset the device, so it will think alt
-			 * setting 0 is installed.  For usb_set_interface() to
-			 * work properly, we need to set the current alternate
-			 * interface setting to 0 (or the first alt setting, if
-			 * the device doesn't have alt setting 0).
+			/* Let the bandwidth allocation function know that this
+			 * device has been reset, and it will have to use
+			 * alternate setting 0 as the current alternate setting.
 			 */
-			intf->cur_altsetting =
-				usb_find_alt_setting(config, i, 0);
-			if (!intf->cur_altsetting)
-				intf->cur_altsetting =
-					&config->intf_cache[i]->altsetting[0];
+			intf->resetting_device = 1;
 			ret = usb_set_interface(udev, desc->bInterfaceNumber,
 					desc->bAlternateSetting);
+			intf->resetting_device = 0;
 		}
 		if (ret < 0) {
 			dev_err(&udev->dev, "failed to restore interface %d "
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 1b99484..9bc95fe 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -906,11 +906,11 @@
 	if (index <= 0)
 		return NULL;
 
-	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL);
+	buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO);
 	if (buf) {
 		len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE);
 		if (len > 0) {
-			smallbuf = kmalloc(++len, GFP_KERNEL);
+			smallbuf = kmalloc(++len, GFP_NOIO);
 			if (!smallbuf)
 				return buf;
 			memcpy(smallbuf, buf, len);
@@ -1731,7 +1731,7 @@
 	if (cp) {
 		nintf = cp->desc.bNumInterfaces;
 		new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
-				GFP_KERNEL);
+				GFP_NOIO);
 		if (!new_interfaces) {
 			dev_err(&dev->dev, "Out of memory\n");
 			return -ENOMEM;
@@ -1740,7 +1740,7 @@
 		for (; n < nintf; ++n) {
 			new_interfaces[n] = kzalloc(
 					sizeof(struct usb_interface),
-					GFP_KERNEL);
+					GFP_NOIO);
 			if (!new_interfaces[n]) {
 				dev_err(&dev->dev, "Out of memory\n");
 				ret = -ENOMEM;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 485edf9..5f3908f 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -115,6 +115,12 @@
 	case USB_SPEED_HIGH:
 		speed = "480";
 		break;
+	case USB_SPEED_VARIABLE:
+		speed = "480";
+		break;
+	case USB_SPEED_SUPER:
+		speed = "5000";
+		break;
 	default:
 		speed = "unknown";
 	}
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 0a577d5..d4f0db5 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -358,7 +358,7 @@
 	 * b15:		bmType (0 == data)
 	 */
 	len = skb->len;
-	put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+	put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
 
 	/* add a zero-length EEM packet, if needed */
 	if (padlen)
@@ -464,7 +464,6 @@
 			}
 
 			/* validate CRC */
-			crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
 			if (header & BIT(14)) {
 				crc = get_unaligned_le32(skb->data + len
 							- ETH_FCS_LEN);
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 4295601..76496f5 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -29,7 +29,7 @@
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
 #endif
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_G_MULTI_RNDIS
 #  define USB_ETH_RNDIS y
 #endif
 
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index e220fb8..8b45145 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 4b5dbd0..5fc80a1 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2582,6 +2582,7 @@
 	hsotg->gadget.dev.driver = NULL;
 	return ret;
 }
+EXPORT_SYMBOL(usb_gadget_register_driver);
 
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5859522..1ec3857 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -787,9 +787,10 @@
 
 			/* start 20 msec resume signaling from this port,
 			 * and make khubd collect PORT_STAT_C_SUSPEND to
-			 * stop that signaling.
+			 * stop that signaling.  Use 5 ms extra for safety,
+			 * like usb_port_resume() does.
 			 */
-			ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
 		}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2c6571c..1937267 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -120,9 +120,26 @@
 	del_timer_sync(&ehci->watchdog);
 	del_timer_sync(&ehci->iaa_watchdog);
 
-	port = HCS_N_PORTS (ehci->hcs_params);
 	spin_lock_irq (&ehci->lock);
 
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	if (hcd->self.root_hub->do_remote_wakeup) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			if (ehci->reset_done[port] != 0) {
+				spin_unlock_irq(&ehci->lock);
+				ehci_dbg(ehci, "suspend failed because "
+						"port %d is resuming\n",
+						port + 1);
+				return -EBUSY;
+			}
+		}
+	}
+
 	/* stop schedules, clean any completed work */
 	if (HC_IS_RUNNING(hcd->state)) {
 		ehci_quiesce (ehci);
@@ -138,6 +155,7 @@
 	 */
 	ehci->bus_suspended = 0;
 	ehci->owned_ports = 0;
+	port = HCS_N_PORTS(ehci->hcs_params);
 	while (port--) {
 		u32 __iomem	*reg = &ehci->regs->port_status [port];
 		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
@@ -178,7 +196,9 @@
 			if (hostpc_reg) {
 				u32	t3;
 
+				spin_unlock_irq(&ehci->lock);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irq(&ehci->lock);
 				t3 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
 				t3 = ehci_readl(ehci, hostpc_reg);
@@ -886,17 +906,18 @@
 			if ((temp & PORT_PE) == 0
 					|| (temp & PORT_RESET) != 0)
 				goto error;
-			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
 			/* After above check the port must be connected.
 			 * Set appropriate bit thus could put phy into low power
 			 * mode if we have hostpc feature
 			 */
+			temp &= ~PORT_WKCONN_E;
+			temp |= PORT_WKDISC_E | PORT_WKOC_E;
+			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 			if (hostpc_reg) {
-				temp &= ~PORT_WKCONN_E;
-				temp |= (PORT_WKDISC_E | PORT_WKOC_E);
-				ehci_writel(ehci, temp | PORT_SUSPEND,
-							status_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irqsave(&ehci->lock, flags);
 				temp1 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, temp1 | HOSTPC_PHCD,
 					hostpc_reg);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a427d3b..8952177 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -849,9 +849,10 @@
 				 * But interval 1 scheduling is simpler, and
 				 * includes high bandwidth.
 				 */
-				dbg ("intr period %d uframes, NYET!",
-						urb->interval);
-				goto done;
+				urb->interval = 1;
+			} else if (qh->period > ehci->periodic_size) {
+				qh->period = ehci->periodic_size;
+				urb->interval = qh->period << 3;
 			}
 		} else {
 			int		think_time;
@@ -874,6 +875,10 @@
 					usb_calc_bus_time (urb->dev->speed,
 					is_input, 0, max_packet (maxp)));
 			qh->period = urb->interval;
+			if (qh->period > ehci->periodic_size) {
+				qh->period = ehci->periodic_size;
+				urb->interval = qh->period;
+			}
 		}
 	}
 
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 0951818..78e7c3c 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -242,9 +242,10 @@
 static void fhci_usb_free(void *lld)
 {
 	struct fhci_usb *usb = lld;
-	struct fhci_hcd *fhci = usb->fhci;
+	struct fhci_hcd *fhci;
 
 	if (usb) {
+		fhci = usb->fhci;
 		fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
 		fhci_ep0_free(usb);
 		kfree(usb->actual_frame);
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index d224ab4..e123289 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -105,7 +105,7 @@
 		if (ep->td_base)
 			cpm_muram_free(cpm_muram_offset(ep->td_base));
 
-		if (ep->conf_frame_Q) {
+		if (kfifo_initialized(&ep->conf_frame_Q)) {
 			size = cq_howmany(&ep->conf_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->conf_frame_Q);
@@ -115,7 +115,7 @@
 			cq_delete(&ep->conf_frame_Q);
 		}
 
-		if (ep->empty_frame_Q) {
+		if (kfifo_initialized(&ep->empty_frame_Q)) {
 			size = cq_howmany(&ep->empty_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->empty_frame_Q);
@@ -125,7 +125,7 @@
 			cq_delete(&ep->empty_frame_Q);
 		}
 
-		if (ep->dummy_packets_Q) {
+		if (kfifo_initialized(&ep->dummy_packets_Q)) {
 			size = cq_howmany(&ep->dummy_packets_Q);
 			for (; size; size--) {
 				u8 *buff = cq_get(&ep->dummy_packets_Q);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 73352f3..4297165 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2270,10 +2270,10 @@
 	dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
 	dev_info(hcd->self.controller, "  ISTL:    2 * %4d:     %4d @ $%04x:$%04x\n",
 		 istl_size / 2, istl_size, 0, istl_size / 2);
-	dev_info(hcd->self.controller, "  INTL: %4d * (%3lu+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  INTL: %4d * (%3zu+8):  %4d @ $%04x\n",
 		 ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
 		 intl_size, istl_size);
-	dev_info(hcd->self.controller, "  ATL : %4d * (%3lu+8):  %4d @ $%04x\n",
+	dev_info(hcd->self.controller, "  ATL : %4d * (%3zu+8):  %4d @ $%04x\n",
 		 atl_buffers, atl_blksize - PTD_HEADER_SIZE,
 		 atl_size, istl_size + intl_size);
 	dev_info(hcd->self.controller, "  USED/FREE:   %4d      %4d\n", total,
@@ -2697,6 +2697,8 @@
 	void __iomem *data_reg;
 	int irq;
 	int retval = 0;
+	struct resource *irq_res;
+	unsigned int irq_flags = 0;
 
 	/* basic sanity checks first.  board-specific init logic should
 	 * have initialized this the three resources and probably board
@@ -2710,11 +2712,12 @@
 
 	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	irq = platform_get_irq(pdev, 0);
-	if (!addr || !data || irq < 0) {
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!addr || !data || !irq_res) {
 		retval = -ENODEV;
 		goto err1;
 	}
+	irq = irq_res->start;
 
 #ifdef CONFIG_USB_HCD_DMA
 	if (pdev->dev.dma_mask) {
@@ -2781,12 +2784,16 @@
 	}
 #endif
 
-#ifdef CONFIG_ARM
-	if (isp1362_hcd->board)
-		set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irq_flags |= IRQF_TRIGGER_RISING;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irq_flags |= IRQF_TRIGGER_FALLING;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+		irq_flags |= IRQF_TRIGGER_HIGH;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+		irq_flags |= IRQF_TRIGGER_LOW;
 
-	retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
 		goto err6;
 	pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9600a58..27b8f7c 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1039,12 +1039,12 @@
 		if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
 			u32 buffstatus;
 
-			/* XXX
+			/*
 			 * NAKs are handled in HW by the chip. Usually if the
 			 * device is not able to send data fast enough.
-			 * This did not trigger for a long time now.
+			 * This happens mostly on slower hardware.
 			 */
-			printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+			printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
 					"%d of %zu done: %08x cur: %08x\n", qtd,
 					urb, qh, PTD_XFERRED_LENGTH(dw3),
 					qtd->length, done_map,
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index b7a661c..bee558ae 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -35,7 +35,9 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/mm.h>
 #include <linux/irq.h>
+#include <asm/cacheflush.h>
 
 #include "../core/hcd.h"
 #include "r8a66597.h"
@@ -216,8 +218,17 @@
 {
 	int port;
 
+	/* disable interrupts */
 	r8a66597_write(r8a66597, 0, INTENB0);
-	r8a66597_write(r8a66597, 0, INTSTS0);
+	r8a66597_write(r8a66597, 0, INTENB1);
+	r8a66597_write(r8a66597, 0, BRDYENB);
+	r8a66597_write(r8a66597, 0, BEMPENB);
+	r8a66597_write(r8a66597, 0, NRDYENB);
+
+	/* clear status */
+	r8a66597_write(r8a66597, 0, BRDYSTS);
+	r8a66597_write(r8a66597, 0, NRDYSTS);
+	r8a66597_write(r8a66597, 0, BEMPSTS);
 
 	for (port = 0; port < r8a66597->max_root_hub; port++)
 		r8a66597_disable_port(r8a66597, port);
@@ -811,6 +822,26 @@
 	enable_r8a66597_pipe_dma(r8a66597, dev, pipe, urb);
 }
 
+static void r8a66597_urb_done(struct r8a66597 *r8a66597, struct urb *urb,
+			      int status)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
+{
+	if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
+		void *ptr;
+
+		for (ptr = urb->transfer_buffer;
+		     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
+		     ptr += PAGE_SIZE)
+			flush_dcache_page(virt_to_page(ptr));
+	}
+
+	usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
+	spin_unlock(&r8a66597->lock);
+	usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, status);
+	spin_lock(&r8a66597->lock);
+}
+
 /* this function must be called with interrupt disabled */
 static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address)
 {
@@ -829,15 +860,9 @@
 		list_del(&td->queue);
 		kfree(td);
 
-		if (urb) {
-			usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597),
-					urb);
+		if (urb)
+			r8a66597_urb_done(r8a66597, urb, -ENODEV);
 
-			spin_unlock(&r8a66597->lock);
-			usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb,
-					-ENODEV);
-			spin_lock(&r8a66597->lock);
-		}
 		break;
 	}
 }
@@ -997,6 +1022,8 @@
 /* this function must be called with interrupt disabled */
 static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 					u16 syssts)
+__releases(r8a66597->lock)
+__acquires(r8a66597->lock)
 {
 	if (syssts == SE0) {
 		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
@@ -1014,7 +1041,9 @@
 			usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
 	}
 
+	spin_unlock(&r8a66597->lock);
 	usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
+	spin_lock(&r8a66597->lock);
 }
 
 /* this function must be called with interrupt disabled */
@@ -1274,10 +1303,7 @@
 		if (usb_pipeisoc(urb->pipe))
 			urb->start_frame = r8a66597_get_frame(hcd);
 
-		usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb);
-		spin_unlock(&r8a66597->lock);
-		usb_hcd_giveback_urb(hcd, urb, status);
-		spin_lock(&r8a66597->lock);
+		r8a66597_urb_done(r8a66597, urb, status);
 	}
 
 	if (restart) {
@@ -2466,6 +2492,12 @@
 	r8a66597->rh_timer.data = (unsigned long)r8a66597;
 	r8a66597->reg = (unsigned long)reg;
 
+	/* make sure no interrupts are pending */
+	ret = r8a66597_clock_enable(r8a66597);
+	if (ret < 0)
+		goto clean_up3;
+	disable_controller(r8a66597);
+
 	for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
 		INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
 		init_timer(&r8a66597->td_timer[i]);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 5cd0e48..99cd00f 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -749,7 +749,20 @@
 	spin_lock_irq(&uhci->lock);
 	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
 		rc = -ESHUTDOWN;
-	else if (!uhci->dead)
+	else if (uhci->dead)
+		;		/* Dead controllers tell no tales */
+
+	/* Once the controller is stopped, port resumes that are already
+	 * in progress won't complete.  Hence if remote wakeup is enabled
+	 * for the root hub and any ports are in the middle of a resume or
+	 * remote wakeup, we must fail the suspend.
+	 */
+	else if (hcd->self.root_hub->do_remote_wakeup &&
+			uhci->resuming_ports) {
+		dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+				"is resuming\n");
+		rc = -EBUSY;
+	} else
 		suspend_rh(uhci, UHCI_RH_SUSPENDED);
 	spin_unlock_irq(&uhci->lock);
 	return rc;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 885b585..8270055 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -167,7 +167,7 @@
 				/* Port received a wakeup request */
 				set_bit(port, &uhci->resuming_ports);
 				uhci->ports_timeout = jiffies +
-						msecs_to_jiffies(20);
+						msecs_to_jiffies(25);
 
 				/* Make sure we see the port again
 				 * after the resuming period is over. */
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 0025847..8b37a4b 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3245,6 +3245,7 @@
 	{ USB_DEVICE(0x0711, 0x0902) },
 	{ USB_DEVICE(0x0711, 0x0903) },
 	{ USB_DEVICE(0x0711, 0x0918) },
+	{ USB_DEVICE(0x0711, 0x0920) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index de56b3d..3d2d3e5 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -44,6 +44,7 @@
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM
+	select USB_OTG_UTILS
 	help
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216f187..7638828 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -50,7 +50,7 @@
  * Version Information
  */
 #define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
@@ -145,10 +145,15 @@
 
 
 
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -552,9 +557,16 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	/*
-	 * Due to many user requests for multiple ELV devices we enable
-	 * them by default.
+	 * ELV devices:
 	 */
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -571,11 +583,17 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -697,6 +715,7 @@
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index da92b49..c8951ae 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,8 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+
 /* OOCDlink by Joern Kaipf <joernk@web.de>
  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
@@ -161,22 +163,37 @@
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
  * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
  *
  * The previously included PID for the UO 100 module was incorrect.
  * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
 #define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
 #define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
 #define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
 #define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
 #define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 #define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
 #define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
@@ -968,6 +985,7 @@
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
 #define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
 
 /*
  * Marvell SheevaPlug
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f1ea3a3..83443d6 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -386,12 +386,12 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (serial->type->max_in_flight_urbs) {
-		spin_lock_irqsave(&port->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	if (serial->type->max_in_flight_urbs)
 		chars = port->tx_bytes_flight;
-		spin_unlock_irqrestore(&port->lock, flags);
-	} else if (serial->num_bulk_out)
+	else if (serial->num_bulk_out)
 		chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
@@ -489,6 +489,8 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	if (port->serial->type->max_in_flight_urbs) {
+		kfree(urb->transfer_buffer);
+
 		spin_lock_irqsave(&port->lock, flags);
 		--port->urbs_in_flight;
 		port->tx_bytes_flight -= urb->transfer_buffer_length;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ac1b644..3eb6143 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -298,6 +298,7 @@
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 64a0a2c..49575fba 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -941,7 +941,7 @@
 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 		"Microtech",
 		"USB-SCSI-DB25",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
@@ -1807,13 +1807,6 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
-		"INTOVA",
-		"Pixtreme",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
-
 /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
  * Mio Moov 330
  */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5a53d4f..e9f9954 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -434,7 +434,8 @@
 	u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor);
 	u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
 	unsigned f = 0;
-	unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY |
+	unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE |
+			US_FL_FIX_CAPACITY |
 			US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE |
 			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index eb12182..d25df51 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -161,8 +161,17 @@
 	return 0;
 }
 
+static void efifb_destroy(struct fb_info *info)
+{
+	if (info->screen_base)
+		iounmap(info->screen_base);
+	release_mem_region(info->aperture_base, info->aperture_size);
+	framebuffer_release(info);
+}
+
 static struct fb_ops efifb_ops = {
 	.owner		= THIS_MODULE,
+	.fb_destroy	= efifb_destroy,
 	.fb_setcolreg	= efifb_setcolreg,
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
@@ -281,7 +290,7 @@
 	info->par = NULL;
 
 	info->aperture_base = efifb_fix.smem_start;
-	info->aperture_size = size_total;
+	info->aperture_size = size_remap;
 
 	info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
 	if (!info->screen_base) {
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 66358fa..b4b6dece 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -593,7 +593,8 @@
  */
 static int imxfb_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct imxfb_info *fbi = platform_get_drvdata(dev);
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct imxfb_info *fbi = info->par;
 
 	pr_debug("%s\n", __func__);
 
@@ -603,7 +604,8 @@
 
 static int imxfb_resume(struct platform_device *dev)
 {
-	struct imxfb_info *fbi = platform_get_drvdata(dev);
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct imxfb_info *fbi = info->par;
 
 	pr_debug("%s\n", __func__);
 
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 054ef29..772ba3f 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -324,8 +324,11 @@
 	unsigned long flags;
 	dma_cookie_t cookie;
 
-	dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
-		to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+	if (mx3_fbi->txd)
+		dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+			to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+	else
+		dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi);
 
 	/* This enables the channel */
 	if (mx3_fbi->cookie < 0) {
@@ -646,6 +649,7 @@
 
 static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
 {
+	dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value);
 	/* This might be board-specific */
 	mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
 	return;
@@ -1486,12 +1490,12 @@
 		goto ersdc0;
 	}
 
+	mx3fb->backlight_level = 255;
+
 	ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
 	if (ret < 0)
 		goto eisdc0;
 
-	mx3fb->backlight_level = 255;
-
 	return 0;
 
 eisdc0:
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index adf9632..53cb722 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -211,21 +211,23 @@
 
 /**
  * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
- * @id: window id.
  * @sfb: The hardware state.
  * @pixclock: The pixel clock wanted, in picoseconds.
  *
  * Given the specified pixel clock, work out the necessary divider to get
  * close to the output frequency.
  */
-static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
+static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk)
 {
-	struct s3c_fb_pd_win *win = sfb->pdata->win[id];
 	unsigned long clk = clk_get_rate(sfb->bus_clk);
+	unsigned long long tmp;
 	unsigned int result;
 
-	pixclk *= win->win_mode.refresh;
-	result = clk / pixclk;
+	tmp = (unsigned long long)clk;
+	tmp *= pixclk;
+
+	do_div(tmp, 1000000000UL);
+	result = (unsigned int)tmp / 1000;
 
 	dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
 		pixclk, clk, result, clk / result);
@@ -301,7 +303,7 @@
 	/* use window 0 as the basis for the lcd output timings */
 
 	if (win_no == 0) {
-		clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
+		clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock);
 
 		data = sfb->pdata->vidcon0;
 		data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c
index 9d4f3a4..d5077df 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/via/accel.c
@@ -137,7 +137,7 @@
 			tmp, dst_pitch);
 		return -EINVAL;
 	}
-	tmp = (tmp >> 3) | (dst_pitch << (16 - 3));
+	tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3));
 	writel(tmp, engine + 0x38);
 
 	if (op == VIA_BITBLT_FILL)
@@ -352,6 +352,9 @@
 	viapar->shared->vq_vram_addr = viapar->fbmem_free;
 	viapar->fbmem_used += VQ_SIZE;
 
+	/* Init 2D engine reg to reset 2D engine */
+	writel(0x0, engine + VIA_REG_KEYCONTROL);
+
 	/* Init AGP and VQ regs */
 	switch (chip_name) {
 	case UNICHROME_K8M890:
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index d8df17a..3028e7d 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -177,16 +177,15 @@
 	}
 
 	if (vmode_index != VIA_RES_INVALID) {
-		viafb_setmode(vmode_index, info->var.xres, info->var.yres,
-			info->var.bits_per_pixel, vmode_index1,
-			viafb_second_xres, viafb_second_yres, viafb_bpp1);
-
 		viafb_update_fix(info);
 		viafb_bpp = info->var.bits_per_pixel;
 		if (info->var.accel_flags & FB_ACCELF_TEXT)
 			info->flags &= ~FBINFO_HWACCEL_DISABLED;
 		else
 			info->flags |= FBINFO_HWACCEL_DISABLED;
+		viafb_setmode(vmode_index, info->var.xres, info->var.yres,
+			info->var.bits_per_pixel, vmode_index1,
+			viafb_second_xres, viafb_second_yres, viafb_bpp1);
 	}
 
 	return 0;
@@ -872,7 +871,9 @@
 	if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo)
 		return -ENODEV;
 
-	if (chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2)
+	/* LCD ouput does not support hw cursors (at least on VN896) */
+	if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) ||
+		viafb_LCD_ON)
 		return -ENODEV;
 
 	viafb_show_hw_cursor(info, HW_Cursor_OFF);
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 9dd5880..505be88 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -266,7 +266,7 @@
 
 static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST };
 
-static struct virtio_driver virtio_balloon = {
+static struct virtio_driver virtio_balloon_driver = {
 	.feature_table = features,
 	.feature_table_size = ARRAY_SIZE(features),
 	.driver.name =	KBUILD_MODNAME,
@@ -279,12 +279,12 @@
 
 static int __init init(void)
 {
-	return register_virtio_driver(&virtio_balloon);
+	return register_virtio_driver(&virtio_balloon_driver);
 }
 
 static void __exit fini(void)
 {
-	unregister_virtio_driver(&virtio_balloon);
+	unregister_virtio_driver(&virtio_balloon_driver);
 }
 module_init(init);
 module_exit(fini);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 088f32f..050ee14 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -396,8 +396,8 @@
 	tristate "Compulab SBC-FITPC2 watchdog"
 	depends on X86
 	---help---
-	  This is the driver for the built-in watchdog timer on the fit-PC2
-	  Single-board computer made by Compulab.
+	  This is the driver for the built-in watchdog timer on the fit-PC2,
+	  fit-PC2i, CM-iAM single-board computers made by Compulab.
 
 	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
 	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index c7b3f9d..2159e66 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -1,9 +1,8 @@
 /*
  * Blackfin On-Chip Watchdog Driver
- *  Supports BF53[123]/BF53[467]/BF54[2489]/BF561
  *
  * Originally based on softdog.c
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2010 Analog Devices Inc.
  * Copyright 2006-2007 Michele d'Amico
  * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
@@ -137,13 +136,15 @@
  */
 static int bfin_wdt_set_timeout(unsigned long t)
 {
-	u32 cnt;
+	u32 cnt, max_t, sclk;
 	unsigned long flags;
 
-	stampit();
+	sclk = get_sclk();
+	max_t = -1 / sclk;
+	cnt = t * sclk;
+	stamp("maxtimeout=%us newtimeout=%lus (cnt=%#x)", max_t, t, cnt);
 
-	cnt = t * get_sclk();
-	if (cnt < get_sclk()) {
+	if (t > max_t) {
 		printk(KERN_WARNING PFX "timeout value is too large\n");
 		return -EINVAL;
 	}
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index c8a3bec..4bdb7f1 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -29,8 +29,9 @@
  *	document number 313056-003, 313057-017: 82801H (ICH8)
  *	document number 316972-004, 316973-012: 82801I (ICH9)
  *	document number 319973-002, 319974-002: 82801J (ICH10)
- *	document number 322169-001, 322170-001: 5 Series, 3400 Series (PCH)
+ *	document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
  *	document number 320066-003, 320257-008: EP80597 (IICH)
+ *	document number TBD                   : Cougar Point (CPT)
  */
 
 /*
@@ -100,8 +101,22 @@
 	TCO_ICH10DO,	/* ICH10DO */
 	TCO_PCH,	/* PCH Desktop Full Featured */
 	TCO_PCHM,	/* PCH Mobile Full Featured */
+	TCO_P55,	/* P55 */
+	TCO_PM55,	/* PM55 */
+	TCO_H55,	/* H55 */
+	TCO_QM57,	/* QM57 */
+	TCO_H57,	/* H57 */
+	TCO_HM55,	/* HM55 */
+	TCO_Q57,	/* Q57 */
+	TCO_HM57,	/* HM57 */
 	TCO_PCHMSFF,	/* PCH Mobile SFF Full Featured */
+	TCO_QS57,	/* QS57 */
+	TCO_3400,	/* 3400 */
+	TCO_3420,	/* 3420 */
+	TCO_3450,	/* 3450 */
 	TCO_EP80579,	/* EP80579 */
+	TCO_CPTD,	/* CPT Desktop */
+	TCO_CPTM,	/* CPT Mobile */
 };
 
 static struct {
@@ -144,8 +159,22 @@
 	{"ICH10DO", 2},
 	{"PCH Desktop Full Featured", 2},
 	{"PCH Mobile Full Featured", 2},
+	{"P55", 2},
+	{"PM55", 2},
+	{"H55", 2},
+	{"QM57", 2},
+	{"H57", 2},
+	{"HM55", 2},
+	{"Q57", 2},
+	{"HM57", 2},
 	{"PCH Mobile SFF Full Featured", 2},
+	{"QS57", 2},
+	{"3400", 2},
+	{"3420", 2},
+	{"3450", 2},
 	{"EP80579", 2},
+	{"CPT Desktop", 2},
+	{"CPT Mobile", 2},
 	{NULL, 0}
 };
 
@@ -216,8 +245,22 @@
 	{ ITCO_PCI_DEVICE(0x3a14,				TCO_ICH10DO)},
 	{ ITCO_PCI_DEVICE(0x3b00,				TCO_PCH)},
 	{ ITCO_PCI_DEVICE(0x3b01,				TCO_PCHM)},
+	{ ITCO_PCI_DEVICE(0x3b02,				TCO_P55)},
+	{ ITCO_PCI_DEVICE(0x3b03,				TCO_PM55)},
+	{ ITCO_PCI_DEVICE(0x3b06,				TCO_H55)},
+	{ ITCO_PCI_DEVICE(0x3b07,				TCO_QM57)},
+	{ ITCO_PCI_DEVICE(0x3b08,				TCO_H57)},
+	{ ITCO_PCI_DEVICE(0x3b09,				TCO_HM55)},
+	{ ITCO_PCI_DEVICE(0x3b0a,				TCO_Q57)},
+	{ ITCO_PCI_DEVICE(0x3b0b,				TCO_HM57)},
 	{ ITCO_PCI_DEVICE(0x3b0d,				TCO_PCHMSFF)},
+	{ ITCO_PCI_DEVICE(0x3b0f,				TCO_QS57)},
+	{ ITCO_PCI_DEVICE(0x3b12,				TCO_3400)},
+	{ ITCO_PCI_DEVICE(0x3b14,				TCO_3420)},
+	{ ITCO_PCI_DEVICE(0x3b16,				TCO_3450)},
 	{ ITCO_PCI_DEVICE(0x5031,				TCO_EP80579)},
+	{ ITCO_PCI_DEVICE(0x1c42,				TCO_CPTD)},
+	{ ITCO_PCI_DEVICE(0x1c43,				TCO_CPTM)},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c
index 4f4b35a..3c79dc5 100644
--- a/drivers/watchdog/ixp2000_wdt.c
+++ b/drivers/watchdog/ixp2000_wdt.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
+#include <linux/timer.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
index 91430a8..e6763d2 100644
--- a/drivers/watchdog/sbc_fitpc2_wdt.c
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -46,9 +46,9 @@
 static void wdt_send_data(unsigned char command, unsigned char data)
 {
 	outb(command, COMMAND_PORT);
-	mdelay(100);
+	msleep(100);
 	outb(data, DATA_PORT);
-	mdelay(200);
+	msleep(200);
 }
 
 static void wdt_enable(void)
@@ -202,11 +202,10 @@
 {
 	int err;
 
-	if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) {
-		pr_info("board name is: %s. Should be SBC-FITPC2\n",
-			dmi_get_system_info(DMI_BOARD_NAME));
+	if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2"))
 		return -ENODEV;
-	}
+
+	pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME));
 
 	if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
 		pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index c499793..5d42d55 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -102,15 +102,15 @@
 		goto out_thaw;
 	}
 
+	printk(KERN_DEBUG "suspending xenstore...\n");
+	xs_suspend();
+
 	err = dpm_suspend_noirq(PMSG_SUSPEND);
 	if (err) {
 		printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
 		goto out_resume;
 	}
 
-	printk(KERN_DEBUG "suspending xenstore...\n");
-	xs_suspend();
-
 	err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
 
 	dpm_resume_noirq(PMSG_RESUME);
@@ -120,13 +120,13 @@
 		cancelled = 1;
 	}
 
+out_resume:
 	if (!cancelled) {
 		xen_arch_resume();
 		xs_resume();
 	} else
 		xs_suspend_cancel();
 
-out_resume:
 	dpm_resume_end(PMSG_RESUME);
 
 	/* Make sure timer events get retriggered on all CPUs */
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index cf62b05..7d6c213 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -84,7 +84,7 @@
 
 static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts)
 {
-	char *options;
+	char *options, *tmp_options;
 	substring_t args[MAX_OPT_ARGS];
 	char *p;
 	int option = 0;
@@ -102,9 +102,12 @@
 	if (!opts)
 		return 0;
 
-	options = kstrdup(opts, GFP_KERNEL);
-	if (!options)
+	tmp_options = kstrdup(opts, GFP_KERNEL);
+	if (!tmp_options) {
+		ret = -ENOMEM;
 		goto fail_option_alloc;
+	}
+	options = tmp_options;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -159,8 +162,12 @@
 			break;
 		case Opt_cache:
 			s = match_strdup(&args[0]);
-			if (!s)
-				goto fail_option_alloc;
+			if (!s) {
+				ret = -ENOMEM;
+				P9_DPRINTK(P9_DEBUG_ERROR,
+				  "problem allocating copy of cache arg\n");
+				goto free_and_return;
+			}
 
 			if (strcmp(s, "loose") == 0)
 				v9ses->cache = CACHE_LOOSE;
@@ -173,8 +180,12 @@
 
 		case Opt_access:
 			s = match_strdup(&args[0]);
-			if (!s)
-				goto fail_option_alloc;
+			if (!s) {
+				ret = -ENOMEM;
+				P9_DPRINTK(P9_DEBUG_ERROR,
+				  "problem allocating copy of access arg\n");
+				goto free_and_return;
+			}
 
 			v9ses->flags &= ~V9FS_ACCESS_MASK;
 			if (strcmp(s, "user") == 0)
@@ -194,13 +205,11 @@
 			continue;
 		}
 	}
-	kfree(options);
-	return ret;
 
+free_and_return:
+	kfree(tmp_options);
 fail_option_alloc:
-	P9_DPRINTK(P9_DEBUG_ERROR,
-		   "failed to allocate copy of option argument\n");
-	return -ENOMEM;
+	return ret;
 }
 
 /**
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index 3a7560e..ed83583 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -60,3 +60,4 @@
 int v9fs_uflags2omode(int uflags, int extended);
 
 ssize_t v9fs_file_readn(struct file *, char *, char __user *, u32, u64);
+void v9fs_blank_wstat(struct p9_wstat *wstat);
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 3902bf4..74a0461 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -257,6 +257,23 @@
 	return total;
 }
 
+static int v9fs_file_fsync(struct file *filp, struct dentry *dentry,
+					int datasync)
+{
+	struct p9_fid *fid;
+	struct p9_wstat wstat;
+	int retval;
+
+	P9_DPRINTK(P9_DEBUG_VFS, "filp %p dentry %p datasync %x\n", filp,
+						dentry, datasync);
+
+	fid = filp->private_data;
+	v9fs_blank_wstat(&wstat);
+
+	retval = p9_client_wstat(fid, &wstat);
+	return retval;
+}
+
 static const struct file_operations v9fs_cached_file_operations = {
 	.llseek = generic_file_llseek,
 	.read = do_sync_read,
@@ -266,6 +283,7 @@
 	.release = v9fs_dir_release,
 	.lock = v9fs_file_lock,
 	.mmap = generic_file_readonly_mmap,
+	.fsync = v9fs_file_fsync,
 };
 
 const struct file_operations v9fs_file_operations = {
@@ -276,4 +294,5 @@
 	.release = v9fs_dir_release,
 	.lock = v9fs_file_lock,
 	.mmap = generic_file_readonly_mmap,
+	.fsync = v9fs_file_fsync,
 };
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 18f74ec..a407fa3 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -176,7 +176,7 @@
  *
  */
 
-static void
+void
 v9fs_blank_wstat(struct p9_wstat *wstat)
 {
 	wstat->type = ~0;
@@ -1001,44 +1001,6 @@
 }
 
 /**
- * v9fs_vfs_readlink - read a symlink's location
- * @dentry: dentry for symlink
- * @buffer: buffer to load symlink location into
- * @buflen: length of buffer
- *
- */
-
-static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer,
-			     int buflen)
-{
-	int retval;
-	int ret;
-	char *link = __getname();
-
-	if (unlikely(!link))
-		return -ENOMEM;
-
-	if (buflen > PATH_MAX)
-		buflen = PATH_MAX;
-
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
-									dentry);
-
-	retval = v9fs_readlink(dentry, link, buflen);
-
-	if (retval > 0) {
-		if ((ret = copy_to_user(buffer, link, retval)) != 0) {
-			P9_DPRINTK(P9_DEBUG_ERROR,
-					"problem copying to user: %d\n", ret);
-			retval = ret;
-		}
-	}
-
-	__putname(link);
-	return retval;
-}
-
-/**
  * v9fs_vfs_follow_link - follow a symlink path
  * @dentry: dentry for symlink
  * @nd: nameidata
@@ -1230,7 +1192,6 @@
 	.rmdir = v9fs_vfs_rmdir,
 	.mknod = v9fs_vfs_mknod,
 	.rename = v9fs_vfs_rename,
-	.readlink = v9fs_vfs_readlink,
 	.getattr = v9fs_vfs_getattr,
 	.setattr = v9fs_vfs_setattr,
 };
@@ -1253,7 +1214,7 @@
 };
 
 static const struct inode_operations v9fs_symlink_inode_operations = {
-	.readlink = v9fs_vfs_readlink,
+	.readlink = generic_readlink,
 	.follow_link = v9fs_vfs_follow_link,
 	.put_link = v9fs_vfs_put_link,
 	.getattr = v9fs_vfs_getattr,
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 14a8644..69357c0 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -188,7 +188,8 @@
 
 	P9_DPRINTK(P9_DEBUG_VFS, " %p\n", s);
 
-	v9fs_dentry_release(s->s_root);	/* clunk root */
+	if (s->s_root)
+		v9fs_dentry_release(s->s_root);	/* clunk root */
 
 	kill_anon_super(s);
 
diff --git a/fs/affs/affs.h b/fs/affs/affs.h
index e511dc6..0e40caa 100644
--- a/fs/affs/affs.h
+++ b/fs/affs/affs.h
@@ -106,8 +106,8 @@
 	u32 s_last_bmap;
 	struct buffer_head *s_bmap_bh;
 	char *s_prefix;			/* Prefix for volumes and assigns. */
-	int s_prefix_len;		/* Length of prefix. */
 	char s_volume[32];		/* Volume prefix for absolute symlinks. */
+	spinlock_t symlink_lock;	/* protects the previous two */
 };
 
 #define SF_INTL		0x0001		/* International filesystem. */
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index 960d336..d70bbba 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -341,10 +341,13 @@
 	p  = (char *)AFFS_HEAD(bh)->table;
 	lc = '/';
 	if (*symname == '/') {
+		struct affs_sb_info *sbi = AFFS_SB(sb);
 		while (*symname == '/')
 			symname++;
-		while (AFFS_SB(sb)->s_volume[i])	/* Cannot overflow */
-			*p++ = AFFS_SB(sb)->s_volume[i++];
+		spin_lock(&sbi->symlink_lock);
+		while (sbi->s_volume[i])	/* Cannot overflow */
+			*p++ = sbi->s_volume[i++];
+		spin_unlock(&sbi->symlink_lock);
 	}
 	while (i < maxlen && (c = *symname++)) {
 		if (c == '.' && lc == '/' && *symname == '.' && symname[1] == '/') {
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 104fdcb..d41e967 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -203,7 +203,7 @@
 		switch (token) {
 		case Opt_bs:
 			if (match_int(&args[0], &n))
-				return -EINVAL;
+				return 0;
 			if (n != 512 && n != 1024 && n != 2048
 			    && n != 4096) {
 				printk ("AFFS: Invalid blocksize (512, 1024, 2048, 4096 allowed)\n");
@@ -213,7 +213,7 @@
 			break;
 		case Opt_mode:
 			if (match_octal(&args[0], &option))
-				return 1;
+				return 0;
 			*mode = option & 0777;
 			*mount_opts |= SF_SETMODE;
 			break;
@@ -221,8 +221,6 @@
 			*mount_opts |= SF_MUFS;
 			break;
 		case Opt_prefix:
-			/* Free any previous prefix */
-			kfree(*prefix);
 			*prefix = match_strdup(&args[0]);
 			if (!*prefix)
 				return 0;
@@ -233,21 +231,21 @@
 			break;
 		case Opt_reserved:
 			if (match_int(&args[0], reserved))
-				return 1;
+				return 0;
 			break;
 		case Opt_root:
 			if (match_int(&args[0], root))
-				return 1;
+				return 0;
 			break;
 		case Opt_setgid:
 			if (match_int(&args[0], &option))
-				return 1;
+				return 0;
 			*gid = option;
 			*mount_opts |= SF_SETGID;
 			break;
 		case Opt_setuid:
 			if (match_int(&args[0], &option))
-				return -EINVAL;
+				return 0;
 			*uid = option;
 			*mount_opts |= SF_SETUID;
 			break;
@@ -311,11 +309,14 @@
 		return -ENOMEM;
 	sb->s_fs_info = sbi;
 	mutex_init(&sbi->s_bmlock);
+	spin_lock_init(&sbi->symlink_lock);
 
 	if (!parse_options(data,&uid,&gid,&i,&reserved,&root_block,
 				&blocksize,&sbi->s_prefix,
 				sbi->s_volume, &mount_flags)) {
 		printk(KERN_ERR "AFFS: Error parsing options\n");
+		kfree(sbi->s_prefix);
+		kfree(sbi);
 		return -EINVAL;
 	}
 	/* N.B. after this point s_prefix must be released */
@@ -516,14 +517,18 @@
 	unsigned long		 mount_flags;
 	int			 res = 0;
 	char			*new_opts = kstrdup(data, GFP_KERNEL);
+	char			 volume[32];
+	char			*prefix = NULL;
 
 	pr_debug("AFFS: remount(flags=0x%x,opts=\"%s\")\n",*flags,data);
 
 	*flags |= MS_NODIRATIME;
 
+	memcpy(volume, sbi->s_volume, 32);
 	if (!parse_options(data, &uid, &gid, &mode, &reserved, &root_block,
-			   &blocksize, &sbi->s_prefix, sbi->s_volume,
+			   &blocksize, &prefix, volume,
 			   &mount_flags)) {
+		kfree(prefix);
 		kfree(new_opts);
 		return -EINVAL;
 	}
@@ -534,6 +539,14 @@
 	sbi->s_mode  = mode;
 	sbi->s_uid   = uid;
 	sbi->s_gid   = gid;
+	/* protect against readers */
+	spin_lock(&sbi->symlink_lock);
+	if (prefix) {
+		kfree(sbi->s_prefix);
+		sbi->s_prefix = prefix;
+	}
+	memcpy(sbi->s_volume, volume, 32);
+	spin_unlock(&sbi->symlink_lock);
 
 	if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
 		unlock_kernel();
diff --git a/fs/affs/symlink.c b/fs/affs/symlink.c
index 4178253..ee00f08 100644
--- a/fs/affs/symlink.c
+++ b/fs/affs/symlink.c
@@ -20,7 +20,6 @@
 	int			 i, j;
 	char			 c;
 	char			 lc;
-	char			*pf;
 
 	pr_debug("AFFS: follow_link(ino=%lu)\n",inode->i_ino);
 
@@ -32,11 +31,15 @@
 	j  = 0;
 	lf = (struct slink_front *)bh->b_data;
 	lc = 0;
-	pf = AFFS_SB(inode->i_sb)->s_prefix ? AFFS_SB(inode->i_sb)->s_prefix : "/";
 
 	if (strchr(lf->symname,':')) {	/* Handle assign or volume name */
+		struct affs_sb_info *sbi = AFFS_SB(inode->i_sb);
+		char *pf;
+		spin_lock(&sbi->symlink_lock);
+		pf = sbi->s_prefix ? sbi->s_prefix : "/";
 		while (i < 1023 && (c = pf[i]))
 			link[i++] = c;
+		spin_unlock(&sbi->symlink_lock);
 		while (i < 1023 && lf->symname[j] != ':')
 			link[i++] = lf->symname[j++];
 		if (i < 1023)
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 33baf27..34ddda8 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -873,6 +873,7 @@
 	brelse(bh);
 
       unacquire_priv_sbp:
+	kfree(befs_sb->mount_opts.iocharset);
 	kfree(sb->s_fs_info);
 
       unacquire_none:
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 6f60336..8f3d9fd 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -353,35 +353,35 @@
 	struct inode *inode;
 	unsigned i, imap_len;
 	struct bfs_sb_info *info;
-	long ret = -EINVAL;
+	int ret = -EINVAL;
 	unsigned long i_sblock, i_eblock, i_eoff, s_size;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
+	mutex_init(&info->bfs_lock);
 	s->s_fs_info = info;
 
 	sb_set_blocksize(s, BFS_BSIZE);
 
-	bh = sb_bread(s, 0);
-	if(!bh)
+	info->si_sbh = sb_bread(s, 0);
+	if (!info->si_sbh)
 		goto out;
-	bfs_sb = (struct bfs_super_block *)bh->b_data;
+	bfs_sb = (struct bfs_super_block *)info->si_sbh->b_data;
 	if (le32_to_cpu(bfs_sb->s_magic) != BFS_MAGIC) {
 		if (!silent)
 			printf("No BFS filesystem on %s (magic=%08x)\n", 
 				s->s_id,  le32_to_cpu(bfs_sb->s_magic));
-		goto out;
+		goto out1;
 	}
 	if (BFS_UNCLEAN(bfs_sb, s) && !silent)
 		printf("%s is unclean, continuing\n", s->s_id);
 
 	s->s_magic = BFS_MAGIC;
-	info->si_sbh = bh;
 
 	if (le32_to_cpu(bfs_sb->s_start) > le32_to_cpu(bfs_sb->s_end)) {
 		printf("Superblock is corrupted\n");
-		goto out;
+		goto out1;
 	}
 
 	info->si_lasti = (le32_to_cpu(bfs_sb->s_start) - BFS_BSIZE) /
@@ -390,7 +390,7 @@
 	imap_len = (info->si_lasti / 8) + 1;
 	info->si_imap = kzalloc(imap_len, GFP_KERNEL);
 	if (!info->si_imap)
-		goto out;
+		goto out1;
 	for (i = 0; i < BFS_ROOT_INO; i++)
 		set_bit(i, info->si_imap);
 
@@ -398,15 +398,13 @@
 	inode = bfs_iget(s, BFS_ROOT_INO);
 	if (IS_ERR(inode)) {
 		ret = PTR_ERR(inode);
-		kfree(info->si_imap);
-		goto out;
+		goto out2;
 	}
 	s->s_root = d_alloc_root(inode);
 	if (!s->s_root) {
 		iput(inode);
 		ret = -ENOMEM;
-		kfree(info->si_imap);
-		goto out;
+		goto out2;
 	}
 
 	info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1) >> BFS_BSIZE_BITS;
@@ -419,10 +417,8 @@
 	bh = sb_bread(s, info->si_blocks - 1);
 	if (!bh) {
 		printf("Last block not available: %lu\n", info->si_blocks - 1);
-		iput(inode);
 		ret = -EIO;
-		kfree(info->si_imap);
-		goto out;
+		goto out3;
 	}
 	brelse(bh);
 
@@ -459,11 +455,8 @@
 			printf("Inode 0x%08x corrupted\n", i);
 
 			brelse(bh);
-			s->s_root = NULL;
-			kfree(info->si_imap);
-			kfree(info);
-			s->s_fs_info = NULL;
-			return -EIO;
+			ret = -EIO;
+			goto out3;
 		}
 
 		if (!di->i_ino) {
@@ -483,11 +476,17 @@
 		s->s_dirt = 1;
 	} 
 	dump_imap("read_super", s);
-	mutex_init(&info->bfs_lock);
 	return 0;
 
+out3:
+	dput(s->s_root);
+	s->s_root = NULL;
+out2:
+	kfree(info->si_imap);
+out1:
+	brelse(info->si_sbh);
 out:
-	brelse(bh);
+	mutex_destroy(&info->bfs_lock);
 	kfree(info);
 	s->s_fs_info = NULL;
 	return ret;
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index 346b694..fdd3970 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -264,6 +264,7 @@
 #else
 	set_personality(PER_LINUX);
 #endif
+	setup_new_exec(bprm);
 
 	current->mm->end_code = ex.a_text +
 		(current->mm->start_code = N_TXTADDR(ex));
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index edd90c4..fd5b2ea 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -662,27 +662,6 @@
 			if (elf_interpreter[elf_ppnt->p_filesz - 1] != '\0')
 				goto out_free_interp;
 
-			/*
-			 * The early SET_PERSONALITY here is so that the lookup
-			 * for the interpreter happens in the namespace of the 
-			 * to-be-execed image.  SET_PERSONALITY can select an
-			 * alternate root.
-			 *
-			 * However, SET_PERSONALITY is NOT allowed to switch
-			 * this task into the new images's memory mapping
-			 * policy - that is, TASK_SIZE must still evaluate to
-			 * that which is appropriate to the execing application.
-			 * This is because exit_mmap() needs to have TASK_SIZE
-			 * evaluate to the size of the old image.
-			 *
-			 * So if (say) a 64-bit application is execing a 32-bit
-			 * application it is the architecture's responsibility
-			 * to defer changing the value of TASK_SIZE until the
-			 * switch really is going to happen - do this in
-			 * flush_thread().	- akpm
-			 */
-			SET_PERSONALITY(loc->elf_ex);
-
 			interpreter = open_exec(elf_interpreter);
 			retval = PTR_ERR(interpreter);
 			if (IS_ERR(interpreter))
@@ -730,9 +709,6 @@
 		/* Verify the interpreter has a valid arch */
 		if (!elf_check_arch(&loc->interp_elf_ex))
 			goto out_free_dentry;
-	} else {
-		/* Executables without an interpreter also need a personality  */
-		SET_PERSONALITY(loc->elf_ex);
 	}
 
 	/* Flush all traces of the currently running executable */
@@ -752,7 +728,8 @@
 
 	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
 		current->flags |= PF_RANDOMIZE;
-	arch_pick_mmap_layout(current->mm);
+
+	setup_new_exec(bprm);
 
 	/* Do this so that we can load the interpreter, if need be.  We will
 	   change some of these later */
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index c57d9ce..18d7729 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -321,6 +321,9 @@
 	set_personality(PER_LINUX_FDPIC);
 	if (elf_read_implies_exec(&exec_params.hdr, executable_stack))
 		current->personality |= READ_IMPLIES_EXEC;
+
+	setup_new_exec(bprm);
+
 	set_binfmt(&elf_fdpic_format);
 
 	current->mm->start_code = 0;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index d4a00ea..42c6b4a 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -519,6 +519,7 @@
 
 		/* OK, This is the point of no return */
 		set_personality(PER_LINUX_32BIT);
+		setup_new_exec(bprm);
 	}
 
 	/*
diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c
index 2a9b533..cc8560f 100644
--- a/fs/binfmt_som.c
+++ b/fs/binfmt_som.c
@@ -227,6 +227,7 @@
 	/* OK, This is the point of no return */
 	current->flags &= ~PF_FORKNOEXEC;
 	current->personality = PER_HPUX;
+	setup_new_exec(bprm);
 
 	/* Set the task size for HP-UX processes such that
 	 * the gateway page is outside the address space.
diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 49a34e7..a16f29e 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -61,7 +61,7 @@
 
 static inline int use_bip_pool(unsigned int idx)
 {
-	if (idx == BIOVEC_NR_POOLS)
+	if (idx == BIOVEC_MAX_IDX)
 		return 1;
 
 	return 0;
@@ -95,6 +95,7 @@
 
 	/* Use mempool if lower order alloc failed or max vecs were requested */
 	if (bip == NULL) {
+		idx = BIOVEC_MAX_IDX;  /* so we free the payload properly later */
 		bip = mempool_alloc(bs->bio_integrity_pool, gfp_mask);
 
 		if (unlikely(bip == NULL)) {
diff --git a/fs/bio.c b/fs/bio.c
index 76e6713a..88094af 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -78,7 +78,7 @@
 
 	i = 0;
 	while (i < bio_slab_nr) {
-		struct bio_slab *bslab = &bio_slabs[i];
+		bslab = &bio_slabs[i];
 
 		if (!bslab->slab && entry == -1)
 			entry = i;
@@ -542,13 +542,18 @@
 
 		if (page == prev->bv_page &&
 		    offset == prev->bv_offset + prev->bv_len) {
+			unsigned int prev_bv_len = prev->bv_len;
 			prev->bv_len += len;
 
 			if (q->merge_bvec_fn) {
 				struct bvec_merge_data bvm = {
+					/* prev_bvec is already charged in
+					   bi_size, discharge it in order to
+					   simulate merging updated prev_bvec
+					   as new bvec. */
 					.bi_bdev = bio->bi_bdev,
 					.bi_sector = bio->bi_sector,
-					.bi_size = bio->bi_size,
+					.bi_size = bio->bi_size - prev_bv_len,
 					.bi_rw = bio->bi_rw,
 				};
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 73d6a73..d11d028 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -246,7 +246,8 @@
 	if (!sb)
 		goto out;
 	if (sb->s_flags & MS_RDONLY) {
-		deactivate_locked_super(sb);
+		sb->s_frozen = SB_FREEZE_TRANS;
+		up_write(&sb->s_umount);
 		mutex_unlock(&bdev->bd_fsfreeze_mutex);
 		return sb;
 	}
@@ -307,7 +308,7 @@
 	BUG_ON(sb->s_bdev != bdev);
 	down_write(&sb->s_umount);
 	if (sb->s_flags & MS_RDONLY)
-		goto out_deactivate;
+		goto out_unfrozen;
 
 	if (sb->s_op->unfreeze_fs) {
 		error = sb->s_op->unfreeze_fs(sb);
@@ -321,11 +322,11 @@
 		}
 	}
 
+out_unfrozen:
 	sb->s_frozen = SB_UNFROZEN;
 	smp_wmb();
 	wake_up(&sb->s_wait_unfrozen);
 
-out_deactivate:
 	if (sb)
 		deactivate_locked_super(sb);
 out_unlock:
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 2e9e699..6df6d6e 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -112,12 +112,14 @@
 	switch (type) {
 	case ACL_TYPE_ACCESS:
 		mode = inode->i_mode;
-		ret = posix_acl_equiv_mode(acl, &mode);
-		if (ret < 0)
-			return ret;
-		ret = 0;
-		inode->i_mode = mode;
 		name = POSIX_ACL_XATTR_ACCESS;
+		if (acl) {
+			ret = posix_acl_equiv_mode(acl, &mode);
+			if (ret < 0)
+				return ret;
+			inode->i_mode = mode;
+		}
+		ret = 0;
 		break;
 	case ACL_TYPE_DEFAULT:
 		if (!S_ISDIR(inode->i_mode))
@@ -242,6 +244,7 @@
 						    ACL_TYPE_ACCESS);
 			}
 		}
+		posix_acl_release(clone);
 	}
 failed:
 	posix_acl_release(acl);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 9f806dd..2aa8ec6 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -1161,6 +1161,7 @@
 #define BTRFS_MOUNT_SSD_SPREAD		(1 << 8)
 #define BTRFS_MOUNT_NOSSD		(1 << 9)
 #define BTRFS_MOUNT_DISCARD		(1 << 10)
+#define BTRFS_MOUNT_FORCE_COMPRESS      (1 << 11)
 
 #define btrfs_clear_opt(o, opt)		((o) &= ~BTRFS_MOUNT_##opt)
 #define btrfs_set_opt(o, opt)		((o) |= BTRFS_MOUNT_##opt)
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 009e3bd..2b59201 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1982,7 +1982,12 @@
 
 	if (!(sb->s_flags & MS_RDONLY)) {
 		ret = btrfs_recover_relocation(tree_root);
-		BUG_ON(ret);
+		if (ret < 0) {
+			printk(KERN_WARNING
+			       "btrfs: failed to recover relocation\n");
+			err = -EINVAL;
+			goto fail_trans_kthread;
+		}
 	}
 
 	location.objectid = BTRFS_FS_TREE_OBJECTID;
@@ -1993,6 +1998,12 @@
 	if (!fs_info->fs_root)
 		goto fail_trans_kthread;
 
+	if (!(sb->s_flags & MS_RDONLY)) {
+		down_read(&fs_info->cleanup_work_sem);
+		btrfs_orphan_cleanup(fs_info->fs_root);
+		up_read(&fs_info->cleanup_work_sem);
+	}
+
 	return tree_root;
 
 fail_trans_kthread:
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 56e5013..559f724 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -83,6 +83,17 @@
 	return (cache->flags & bits) == bits;
 }
 
+void btrfs_get_block_group(struct btrfs_block_group_cache *cache)
+{
+	atomic_inc(&cache->count);
+}
+
+void btrfs_put_block_group(struct btrfs_block_group_cache *cache)
+{
+	if (atomic_dec_and_test(&cache->count))
+		kfree(cache);
+}
+
 /*
  * this adds the block group to the fs_info rb tree for the block group
  * cache
@@ -156,7 +167,7 @@
 		}
 	}
 	if (ret)
-		atomic_inc(&ret->count);
+		btrfs_get_block_group(ret);
 	spin_unlock(&info->block_group_cache_lock);
 
 	return ret;
@@ -407,6 +418,8 @@
 
 	put_caching_control(caching_ctl);
 	atomic_dec(&block_group->space_info->caching_threads);
+	btrfs_put_block_group(block_group);
+
 	return 0;
 }
 
@@ -447,6 +460,7 @@
 	up_write(&fs_info->extent_commit_sem);
 
 	atomic_inc(&cache->space_info->caching_threads);
+	btrfs_get_block_group(cache);
 
 	tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
 			  cache->key.objectid);
@@ -486,12 +500,6 @@
 	return cache;
 }
 
-void btrfs_put_block_group(struct btrfs_block_group_cache *cache)
-{
-	if (atomic_dec_and_test(&cache->count))
-		kfree(cache);
-}
-
 static struct btrfs_space_info *__find_space_info(struct btrfs_fs_info *info,
 						  u64 flags)
 {
@@ -2582,7 +2590,7 @@
 	if (node) {
 		cache = rb_entry(node, struct btrfs_block_group_cache,
 				 cache_node);
-		atomic_inc(&cache->count);
+		btrfs_get_block_group(cache);
 	} else
 		cache = NULL;
 	spin_unlock(&root->fs_info->block_group_cache_lock);
@@ -4227,7 +4235,7 @@
 		u64 offset;
 		int cached;
 
-		atomic_inc(&block_group->count);
+		btrfs_get_block_group(block_group);
 		search_start = block_group->key.objectid;
 
 have_block_group:
@@ -4315,7 +4323,7 @@
 
 				btrfs_put_block_group(block_group);
 				block_group = last_ptr->block_group;
-				atomic_inc(&block_group->count);
+				btrfs_get_block_group(block_group);
 				spin_unlock(&last_ptr->lock);
 				spin_unlock(&last_ptr->refill_lock);
 
@@ -5394,10 +5402,6 @@
 	int ret;
 
 	while (level >= 0) {
-		if (path->slots[level] >=
-		    btrfs_header_nritems(path->nodes[level]))
-			break;
-
 		ret = walk_down_proc(trans, root, path, wc, lookup_info);
 		if (ret > 0)
 			break;
@@ -5405,6 +5409,10 @@
 		if (level == 0)
 			break;
 
+		if (path->slots[level] >=
+		    btrfs_header_nritems(path->nodes[level]))
+			break;
+
 		ret = do_walk_down(trans, root, path, wc, &lookup_info);
 		if (ret > 0) {
 			path->slots[level]++;
@@ -7395,9 +7403,7 @@
 			wait_block_group_cache_done(block_group);
 
 		btrfs_remove_free_space_cache(block_group);
-
-		WARN_ON(atomic_read(&block_group->count) != 1);
-		kfree(block_group);
+		btrfs_put_block_group(block_group);
 
 		spin_lock(&info->block_group_cache_lock);
 	}
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 96577e8..b177ed3 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3165,10 +3165,9 @@
 		spin_unlock(&tree->buffer_lock);
 		goto free_eb;
 	}
-	spin_unlock(&tree->buffer_lock);
-
 	/* add one reference for the tree */
 	atomic_inc(&eb->refs);
+	spin_unlock(&tree->buffer_lock);
 	return eb;
 
 free_eb:
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index 46bea0f..428fcac 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -155,20 +155,6 @@
 	return NULL;
 }
 
-/*
- * look for an offset in the tree, and if it can't be found, return
- * the first offset we can find smaller than 'offset'.
- */
-static inline struct rb_node *tree_search(struct rb_root *root, u64 offset)
-{
-	struct rb_node *prev;
-	struct rb_node *ret;
-	ret = __tree_search(root, offset, &prev, NULL);
-	if (!ret)
-		return prev;
-	return ret;
-}
-
 /* check to see if two extent_map structs are adjacent and safe to merge */
 static int mergable_maps(struct extent_map *prev, struct extent_map *next)
 {
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index feaa13b..6ed434a 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -506,7 +506,8 @@
 }
 
 static int extent_mergeable(struct extent_buffer *leaf, int slot,
-			    u64 objectid, u64 bytenr, u64 *start, u64 *end)
+			    u64 objectid, u64 bytenr, u64 orig_offset,
+			    u64 *start, u64 *end)
 {
 	struct btrfs_file_extent_item *fi;
 	struct btrfs_key key;
@@ -522,6 +523,7 @@
 	fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item);
 	if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG ||
 	    btrfs_file_extent_disk_bytenr(leaf, fi) != bytenr ||
+	    btrfs_file_extent_offset(leaf, fi) != key.offset - orig_offset ||
 	    btrfs_file_extent_compression(leaf, fi) ||
 	    btrfs_file_extent_encryption(leaf, fi) ||
 	    btrfs_file_extent_other_encoding(leaf, fi))
@@ -561,6 +563,7 @@
 	u64 split;
 	int del_nr = 0;
 	int del_slot = 0;
+	int recow;
 	int ret;
 
 	btrfs_drop_extent_cache(inode, start, end - 1, 0);
@@ -568,6 +571,7 @@
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 again:
+	recow = 0;
 	split = start;
 	key.objectid = inode->i_ino;
 	key.type = BTRFS_EXTENT_DATA_KEY;
@@ -591,12 +595,60 @@
 	bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
 	num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
 	orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi);
+	memcpy(&new_key, &key, sizeof(new_key));
+
+	if (start == key.offset && end < extent_end) {
+		other_start = 0;
+		other_end = start;
+		if (extent_mergeable(leaf, path->slots[0] - 1,
+				     inode->i_ino, bytenr, orig_offset,
+				     &other_start, &other_end)) {
+			new_key.offset = end;
+			btrfs_set_item_key_safe(trans, root, path, &new_key);
+			fi = btrfs_item_ptr(leaf, path->slots[0],
+					    struct btrfs_file_extent_item);
+			btrfs_set_file_extent_num_bytes(leaf, fi,
+							extent_end - end);
+			btrfs_set_file_extent_offset(leaf, fi,
+						     end - orig_offset);
+			fi = btrfs_item_ptr(leaf, path->slots[0] - 1,
+					    struct btrfs_file_extent_item);
+			btrfs_set_file_extent_num_bytes(leaf, fi,
+							end - other_start);
+			btrfs_mark_buffer_dirty(leaf);
+			goto out;
+		}
+	}
+
+	if (start > key.offset && end == extent_end) {
+		other_start = end;
+		other_end = 0;
+		if (extent_mergeable(leaf, path->slots[0] + 1,
+				     inode->i_ino, bytenr, orig_offset,
+				     &other_start, &other_end)) {
+			fi = btrfs_item_ptr(leaf, path->slots[0],
+					    struct btrfs_file_extent_item);
+			btrfs_set_file_extent_num_bytes(leaf, fi,
+							start - key.offset);
+			path->slots[0]++;
+			new_key.offset = start;
+			btrfs_set_item_key_safe(trans, root, path, &new_key);
+
+			fi = btrfs_item_ptr(leaf, path->slots[0],
+					    struct btrfs_file_extent_item);
+			btrfs_set_file_extent_num_bytes(leaf, fi,
+							other_end - start);
+			btrfs_set_file_extent_offset(leaf, fi,
+						     start - orig_offset);
+			btrfs_mark_buffer_dirty(leaf);
+			goto out;
+		}
+	}
 
 	while (start > key.offset || end < extent_end) {
 		if (key.offset == start)
 			split = end;
 
-		memcpy(&new_key, &key, sizeof(new_key));
 		new_key.offset = split;
 		ret = btrfs_duplicate_item(trans, root, path, &new_key);
 		if (ret == -EAGAIN) {
@@ -631,15 +683,18 @@
 			path->slots[0]--;
 			extent_end = end;
 		}
+		recow = 1;
 	}
 
-	fi = btrfs_item_ptr(leaf, path->slots[0],
-			    struct btrfs_file_extent_item);
-
 	other_start = end;
 	other_end = 0;
-	if (extent_mergeable(leaf, path->slots[0] + 1, inode->i_ino,
-			     bytenr, &other_start, &other_end)) {
+	if (extent_mergeable(leaf, path->slots[0] + 1,
+			     inode->i_ino, bytenr, orig_offset,
+			     &other_start, &other_end)) {
+		if (recow) {
+			btrfs_release_path(root, path);
+			goto again;
+		}
 		extent_end = other_end;
 		del_slot = path->slots[0] + 1;
 		del_nr++;
@@ -650,8 +705,13 @@
 	}
 	other_start = 0;
 	other_end = start;
-	if (extent_mergeable(leaf, path->slots[0] - 1, inode->i_ino,
-			     bytenr, &other_start, &other_end)) {
+	if (extent_mergeable(leaf, path->slots[0] - 1,
+			     inode->i_ino, bytenr, orig_offset,
+			     &other_start, &other_end)) {
+		if (recow) {
+			btrfs_release_path(root, path);
+			goto again;
+		}
 		key.offset = other_start;
 		del_slot = path->slots[0];
 		del_nr++;
@@ -661,21 +721,23 @@
 		BUG_ON(ret);
 	}
 	if (del_nr == 0) {
+		fi = btrfs_item_ptr(leaf, path->slots[0],
+			   struct btrfs_file_extent_item);
 		btrfs_set_file_extent_type(leaf, fi,
 					   BTRFS_FILE_EXTENT_REG);
 		btrfs_mark_buffer_dirty(leaf);
-		goto out;
+	} else {
+		fi = btrfs_item_ptr(leaf, del_slot - 1,
+			   struct btrfs_file_extent_item);
+		btrfs_set_file_extent_type(leaf, fi,
+					   BTRFS_FILE_EXTENT_REG);
+		btrfs_set_file_extent_num_bytes(leaf, fi,
+						extent_end - key.offset);
+		btrfs_mark_buffer_dirty(leaf);
+
+		ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
+		BUG_ON(ret);
 	}
-
-	fi = btrfs_item_ptr(leaf, del_slot - 1,
-			    struct btrfs_file_extent_item);
-	btrfs_set_file_extent_type(leaf, fi, BTRFS_FILE_EXTENT_REG);
-	btrfs_set_file_extent_num_bytes(leaf, fi,
-					extent_end - key.offset);
-	btrfs_mark_buffer_dirty(leaf);
-
-	ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
-	BUG_ON(ret);
 out:
 	btrfs_free_path(path);
 	return 0;
@@ -1073,7 +1135,7 @@
 	}
 	mutex_lock(&dentry->d_inode->i_mutex);
 out:
-	return ret > 0 ? EIO : ret;
+	return ret > 0 ? -EIO : ret;
 }
 
 static const struct vm_operations_struct btrfs_file_vm_ops = {
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 5440bab..4deb280 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -483,7 +483,8 @@
 		nr_pages_ret = 0;
 
 		/* flag the file so we don't compress in the future */
-		BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
+		if (!btrfs_test_opt(root, FORCE_COMPRESS))
+			BTRFS_I(inode)->flags |= BTRFS_INODE_NOCOMPRESS;
 	}
 	if (will_compress) {
 		*num_added += 1;
@@ -1680,24 +1681,6 @@
  * before we start the transaction.  It limits the amount of btree
  * reads required while inside the transaction.
  */
-static noinline void reada_csum(struct btrfs_root *root,
-				struct btrfs_path *path,
-				struct btrfs_ordered_extent *ordered_extent)
-{
-	struct btrfs_ordered_sum *sum;
-	u64 bytenr;
-
-	sum = list_entry(ordered_extent->list.next, struct btrfs_ordered_sum,
-			 list);
-	bytenr = sum->sums[0].bytenr;
-
-	/*
-	 * we don't care about the results, the point of this search is
-	 * just to get the btree leaves into ram
-	 */
-	btrfs_lookup_csum(NULL, root->fs_info->csum_root, path, bytenr, 0);
-}
-
 /* as ordered data IO finishes, this gets called so we can finish
  * an ordered extent if the range of bytes in the file it covers are
  * fully written.
@@ -1708,7 +1691,6 @@
 	struct btrfs_trans_handle *trans;
 	struct btrfs_ordered_extent *ordered_extent = NULL;
 	struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
-	struct btrfs_path *path;
 	int compressed = 0;
 	int ret;
 
@@ -1716,32 +1698,9 @@
 	if (!ret)
 		return 0;
 
-	/*
-	 * before we join the transaction, try to do some of our IO.
-	 * This will limit the amount of IO that we have to do with
-	 * the transaction running.  We're unlikely to need to do any
-	 * IO if the file extents are new, the disk_i_size checks
-	 * covers the most common case.
-	 */
-	if (start < BTRFS_I(inode)->disk_i_size) {
-		path = btrfs_alloc_path();
-		if (path) {
-			ret = btrfs_lookup_file_extent(NULL, root, path,
-						       inode->i_ino,
-						       start, 0);
-			ordered_extent = btrfs_lookup_ordered_extent(inode,
-								     start);
-			if (!list_empty(&ordered_extent->list)) {
-				btrfs_release_path(root, path);
-				reada_csum(root, path, ordered_extent);
-			}
-			btrfs_free_path(path);
-		}
-	}
-
-	if (!ordered_extent)
-		ordered_extent = btrfs_lookup_ordered_extent(inode, start);
+	ordered_extent = btrfs_lookup_ordered_extent(inode, start);
 	BUG_ON(!ordered_extent);
+
 	if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) {
 		BUG_ON(!list_empty(&ordered_extent->list));
 		ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent);
@@ -3995,7 +3954,11 @@
 
 	/* Reached end of directory/root. Bump pos past the last item. */
 	if (key_type == BTRFS_DIR_INDEX_KEY)
-		filp->f_pos = INT_LIMIT(off_t);
+		/*
+		 * 32-bit glibc will use getdents64, but then strtol -
+		 * so the last number we can serve is this.
+		 */
+		filp->f_pos = 0x7fffffff;
 	else
 		filp->f_pos++;
 nopos:
@@ -5789,7 +5752,7 @@
 }
 
 static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
-			       u64 alloc_hint, int mode)
+			u64 alloc_hint, int mode, loff_t actual_len)
 {
 	struct btrfs_trans_handle *trans;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
@@ -5798,6 +5761,7 @@
 	u64 cur_offset = start;
 	u64 num_bytes = end - start;
 	int ret = 0;
+	u64 i_size;
 
 	while (num_bytes > 0) {
 		alloc_size = min(num_bytes, root->fs_info->max_extent);
@@ -5835,9 +5799,15 @@
 		inode->i_ctime = CURRENT_TIME;
 		BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC;
 		if (!(mode & FALLOC_FL_KEEP_SIZE) &&
-		    cur_offset > inode->i_size) {
-			i_size_write(inode, cur_offset);
-			btrfs_ordered_update_i_size(inode, cur_offset, NULL);
+			(actual_len > inode->i_size) &&
+			(cur_offset > inode->i_size)) {
+
+			if (cur_offset > actual_len)
+				i_size  = actual_len;
+			else
+				i_size = cur_offset;
+			i_size_write(inode, i_size);
+			btrfs_ordered_update_i_size(inode, i_size, NULL);
 		}
 
 		ret = btrfs_update_inode(trans, root, inode);
@@ -5930,7 +5900,7 @@
 		     !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
 			ret = prealloc_file_range(inode,
 						  cur_offset, last_byte,
-						  alloc_hint, mode);
+						alloc_hint, mode, offset+len);
 			if (ret < 0) {
 				free_extent_map(em);
 				break;
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index b10a49d..5c2a9e7 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -626,6 +626,8 @@
 
 	if (ordered)
 		offset = entry_end(ordered);
+	else
+		offset = ALIGN(offset, BTRFS_I(inode)->root->sectorsize);
 
 	mutex_lock(&tree->mutex);
 	disk_i_size = BTRFS_I(inode)->disk_i_size;
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index a972868..ab7ab53 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -3281,8 +3281,10 @@
 		return -ENOMEM;
 
 	path = btrfs_alloc_path();
-	if (!path)
+	if (!path) {
+		kfree(cluster);
 		return -ENOMEM;
+	}
 
 	rc->extents_found = 0;
 	rc->extents_skipped = 0;
@@ -3762,7 +3764,8 @@
 				       BTRFS_DATA_RELOC_TREE_OBJECTID);
 		if (IS_ERR(fs_root))
 			err = PTR_ERR(fs_root);
-		btrfs_orphan_cleanup(fs_root);
+		else
+			btrfs_orphan_cleanup(fs_root);
 	}
 	return err;
 }
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 3f9b457..8a1ea6e 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -66,7 +66,8 @@
 	Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
 	Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
 	Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
-	Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
+	Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio,
+	Opt_flushoncommit,
 	Opt_discard, Opt_err,
 };
 
@@ -82,6 +83,7 @@
 	{Opt_alloc_start, "alloc_start=%s"},
 	{Opt_thread_pool, "thread_pool=%d"},
 	{Opt_compress, "compress"},
+	{Opt_compress_force, "compress-force"},
 	{Opt_ssd, "ssd"},
 	{Opt_ssd_spread, "ssd_spread"},
 	{Opt_nossd, "nossd"},
@@ -173,6 +175,11 @@
 			printk(KERN_INFO "btrfs: use compression\n");
 			btrfs_set_opt(info->mount_opt, COMPRESS);
 			break;
+		case Opt_compress_force:
+			printk(KERN_INFO "btrfs: forcing compression\n");
+			btrfs_set_opt(info->mount_opt, FORCE_COMPRESS);
+			btrfs_set_opt(info->mount_opt, COMPRESS);
+			break;
 		case Opt_ssd:
 			printk(KERN_INFO "btrfs: use ssd allocation scheme\n");
 			btrfs_set_opt(info->mount_opt, SSD);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 198cff2..41ecbb2 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1135,7 +1135,7 @@
 		root->fs_info->avail_metadata_alloc_bits;
 
 	if ((all_avail & BTRFS_BLOCK_GROUP_RAID10) &&
-	    root->fs_info->fs_devices->rw_devices <= 4) {
+	    root->fs_info->fs_devices->num_devices <= 4) {
 		printk(KERN_ERR "btrfs: unable to go below four devices "
 		       "on raid10\n");
 		ret = -EINVAL;
@@ -1143,7 +1143,7 @@
 	}
 
 	if ((all_avail & BTRFS_BLOCK_GROUP_RAID1) &&
-	    root->fs_info->fs_devices->rw_devices <= 2) {
+	    root->fs_info->fs_devices->num_devices <= 2) {
 		printk(KERN_ERR "btrfs: unable to go below two "
 		       "devices on raid1\n");
 		ret = -EINVAL;
@@ -1434,8 +1434,8 @@
 		return -EINVAL;
 
 	bdev = open_bdev_exclusive(device_path, 0, root->fs_info->bdev_holder);
-	if (!bdev)
-		return -EIO;
+	if (IS_ERR(bdev))
+		return PTR_ERR(bdev);
 
 	if (root->fs_info->fs_devices->seeding) {
 		seeding_dev = 1;
@@ -2538,6 +2538,11 @@
 	if (!em)
 		return 1;
 
+	if (btrfs_test_opt(root, DEGRADED)) {
+		free_extent_map(em);
+		return 0;
+	}
+
 	map = (struct map_lookup *)em->bdev;
 	for (i = 0; i < map->num_stripes; i++) {
 		if (!map->stripes[i].dev->writeable) {
@@ -2649,8 +2654,10 @@
 	em = lookup_extent_mapping(em_tree, logical, *length);
 	read_unlock(&em_tree->lock);
 
-	if (!em && unplug_page)
+	if (!em && unplug_page) {
+		kfree(multi);
 		return 0;
+	}
 
 	if (!em) {
 		printk(KERN_CRIT "unable to find logical %llu len %llu\n",
diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c
index 14ac480..eeb4986 100644
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -348,7 +348,17 @@
 	dir = dget_parent(object->dentry);
 
 	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
-	ret = cachefiles_bury_object(cache, dir, object->dentry);
+
+	/* we need to check that our parent is _still_ our parent - it may have
+	 * been renamed */
+	if (dir == object->dentry->d_parent) {
+		ret = cachefiles_bury_object(cache, dir, object->dentry);
+	} else {
+		/* it got moved, presumably by cachefilesd culling it, so it's
+		 * no longer in the key path and we can ignore it */
+		mutex_unlock(&dir->d_inode->i_mutex);
+		ret = 0;
+	}
 
 	dput(dir);
 	_leave(" = %d", ret);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 7b2600b..49503d2 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,7 @@
+Version 1.62
+------------
+Add sockopt=TCP_NODELAY mount option.
+
 Version 1.61
 ------------
 Fix append problem to Samba servers (files opened with O_APPEND could
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index fea9e89..b44ce0a 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -269,7 +269,7 @@
 	int err;
 
 	mntget(newmnt);
-	err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist);
+	err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags | MNT_SHRINKABLE, mntlist);
 	switch (err) {
 	case 0:
 		path_put(&nd->path);
@@ -371,7 +371,6 @@
 	if (IS_ERR(mnt))
 		goto out_err;
 
-	nd->path.mnt->mnt_flags |= MNT_SHRINKABLE;
 	rc = add_mount_helper(mnt, nd, &cifs_dfs_automount_list);
 
 out:
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index ac2b24c..78c1b86 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -113,5 +113,5 @@
 extern const struct export_operations cifs_export_ops;
 #endif /* EXPERIMENTAL */
 
-#define CIFS_VERSION   "1.61"
+#define CIFS_VERSION   "1.62"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 4b35f7e..ed751bb 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -149,6 +149,7 @@
 	bool svlocal:1;			/* local server or remote */
 	bool noblocksnd;		/* use blocking sendmsg */
 	bool noautotune;		/* do not autotune send buf sizes */
+	bool tcp_nodelay;
 	atomic_t inFlight;  /* number of requests on the wire to server */
 #ifdef CONFIG_CIFS_STATS2
 	atomic_t inSend; /* requests trying to send */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 3bbcaa7..2e9e09c 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -98,7 +98,7 @@
 	bool nostrictsync:1; /* do not force expensive SMBflush on every sync */
 	unsigned int rsize;
 	unsigned int wsize;
-	unsigned int sockopt;
+	bool sockopt_tcp_nodelay:1;
 	unsigned short int port;
 	char *prepath;
 };
@@ -1142,9 +1142,11 @@
 					simple_strtoul(value, &value, 0);
 			}
 		} else if (strnicmp(data, "sockopt", 5) == 0) {
-			if (value && *value) {
-				vol->sockopt =
-					simple_strtoul(value, &value, 0);
+			if (!value || !*value) {
+				cERROR(1, ("no socket option specified"));
+				continue;
+			} else if (strnicmp(value, "TCP_NODELAY", 11) == 0) {
+				vol->sockopt_tcp_nodelay = 1;
 			}
 		} else if (strnicmp(data, "netbiosname", 4) == 0) {
 			if (!value || !*value || (*value == ' ')) {
@@ -1514,6 +1516,7 @@
 
 	tcp_ses->noblocksnd = volume_info->noblocksnd;
 	tcp_ses->noautotune = volume_info->noautotune;
+	tcp_ses->tcp_nodelay = volume_info->sockopt_tcp_nodelay;
 	atomic_set(&tcp_ses->inFlight, 0);
 	init_waitqueue_head(&tcp_ses->response_q);
 	init_waitqueue_head(&tcp_ses->request_q);
@@ -1764,6 +1767,7 @@
 ipv4_connect(struct TCP_Server_Info *server)
 {
 	int rc = 0;
+	int val;
 	bool connected = false;
 	__be16 orig_port = 0;
 	struct socket *socket = server->ssocket;
@@ -1845,6 +1849,14 @@
 			socket->sk->sk_rcvbuf = 140 * 1024;
 	}
 
+	if (server->tcp_nodelay) {
+		val = 1;
+		rc = kernel_setsockopt(socket, SOL_TCP, TCP_NODELAY,
+				(char *)&val, sizeof(val));
+		if (rc)
+			cFYI(1, ("set TCP_NODELAY socket option error %d", rc));
+	}
+
 	 cFYI(1, ("sndbuf %d rcvbuf %d rcvtimeo 0x%lx",
 		 socket->sk->sk_sndbuf,
 		 socket->sk->sk_rcvbuf, socket->sk->sk_rcvtimeo));
@@ -1916,6 +1928,7 @@
 ipv6_connect(struct TCP_Server_Info *server)
 {
 	int rc = 0;
+	int val;
 	bool connected = false;
 	__be16 orig_port = 0;
 	struct socket *socket = server->ssocket;
@@ -1987,6 +2000,15 @@
 	 */
 	socket->sk->sk_rcvtimeo = 7 * HZ;
 	socket->sk->sk_sndtimeo = 5 * HZ;
+
+	if (server->tcp_nodelay) {
+		val = 1;
+		rc = kernel_setsockopt(socket, SOL_TCP, TCP_NODELAY,
+				(char *)&val, sizeof(val));
+		if (rc)
+			cFYI(1, ("set TCP_NODELAY socket option error %d", rc));
+	}
+
 	server->ssocket = socket;
 
 	return rc;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index cf18ee7..e3fda97 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1762,8 +1762,18 @@
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
 	}
 
-	if (!rc)
+	if (!rc) {
 		rc = inode_setattr(inode, attrs);
+
+		/* force revalidate when any of these times are set since some
+		   of the fs types (eg ext3, fat) do not have fine enough
+		   time granularity to match protocol, and we do not have a
+		   a way (yet) to query the server fs's time granularity (and
+		   whether it rounds times down).
+		*/
+		if (!rc && (attrs->ia_valid & (ATTR_MTIME | ATTR_CTIME)))
+			cifsInode->time = 0;
+	}
 out:
 	kfree(args);
 	kfree(full_path);
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index f84062f..c343b14 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -77,6 +77,11 @@
 
 	cFYI(1, ("For %s", name->name));
 
+	if (parent->d_op && parent->d_op->d_hash)
+		parent->d_op->d_hash(parent, name);
+	else
+		name->hash = full_name_hash(name->name, name->len);
+
 	dentry = d_lookup(parent, name);
 	if (dentry) {
 		/* FIXME: check for inode number changes? */
@@ -666,12 +671,11 @@
 					   min(len, max_len), nlt,
 					   cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
+		pqst->len -= nls_nullsize(nlt);
 	} else {
 		pqst->name = filename;
 		pqst->len = len;
 	}
-	pqst->hash = full_name_hash(pqst->name, pqst->len);
-/*	cFYI(1, ("filldir on %s",pqst->name));  */
 	return rc;
 }
 
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 7085a62..aaa9c1c 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -223,9 +223,9 @@
 		/* null user mount */
 		*bcc_ptr = 0;
 		*(bcc_ptr+1) = 0;
-	} else { /* 300 should be long enough for any conceivable user name */
+	} else {
 		bytes_ret = cifs_strtoUCS((__le16 *) bcc_ptr, ses->userName,
-					  300, nls_cp);
+					  MAX_USERNAME_SIZE, nls_cp);
 	}
 	bcc_ptr += 2 * bytes_ret;
 	bcc_ptr += 2; /* account for null termination */
@@ -246,11 +246,10 @@
 	/* copy user */
 	if (ses->userName == NULL) {
 		/* BB what about null user mounts - check that we do this BB */
-	} else { /* 300 should be long enough for any conceivable user name */
-		strncpy(bcc_ptr, ses->userName, 300);
+	} else {
+		strncpy(bcc_ptr, ses->userName, MAX_USERNAME_SIZE);
 	}
-	/* BB improve check for overflow */
-	bcc_ptr += strnlen(ses->userName, 300);
+	bcc_ptr += strnlen(ses->userName, MAX_USERNAME_SIZE);
 	*bcc_ptr = 0;
 	bcc_ptr++; /* account for null termination */
 
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 332dd00..0ca9ec4 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -301,6 +301,12 @@
 	u32 data;
 	void __user *dxferp;
 	int err;
+	int interface_id;
+
+	if (get_user(interface_id, &sgio32->interface_id))
+		return -EFAULT;
+	if (interface_id != 'S')
+		return sys_ioctl(fd, cmd, (unsigned long)sgio32);
 
 	if (get_user(iovec_count, &sgio32->iovec_count))
 		return -EFAULT;
@@ -936,6 +942,7 @@
 COMPATIBLE_IOCTL(TIOCLINUX)
 COMPATIBLE_IOCTL(TIOCSBRK)
 COMPATIBLE_IOCTL(TIOCCBRK)
+COMPATIBLE_IOCTL(TIOCGSID)
 COMPATIBLE_IOCTL(TIOCGICOUNT)
 /* Little t */
 COMPATIBLE_IOCTL(TIOCGETD)
@@ -1005,6 +1012,9 @@
 COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST)
 COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI)
 #endif
+/* Big V (don't complain on serial console) */
+IGNORE_IOCTL(VT_OPENQRY)
+IGNORE_IOCTL(VT_GETMODE)
 /* Little p (/dev/rtc, /dev/envctrl, etc.) */
 COMPATIBLE_IOCTL(RTC_AIE_ON)
 COMPATIBLE_IOCTL(RTC_AIE_OFF)
@@ -1035,6 +1045,8 @@
 #ifdef CONFIG_BLOCK
 /* loop */
 IGNORE_IOCTL(LOOP_CLR_FD)
+/* md calls this on random blockdevs */
+IGNORE_IOCTL(RAID_VERSION)
 /* SG stuff */
 COMPATIBLE_IOCTL(SG_SET_TIMEOUT)
 COMPATIBLE_IOCTL(SG_GET_TIMEOUT)
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index c8afa6b..32a5f46 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -121,8 +121,10 @@
 				ret = -ENOENT;
 				path_put(path);
 			}
-		} else
+		} else {
 			ret = -EPERM;
+			path_put(path);
+		}
 	}
 
 	return ret;
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index b486169..274ac86 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -160,15 +160,8 @@
 	 * block. A pointer to that is in the struct vfsmount that we
 	 * have around.
 	 */
-	if (!parent) {
-		if (debugfs_mount && debugfs_mount->mnt_sb) {
-			parent = debugfs_mount->mnt_sb->s_root;
-		}
-	}
-	if (!parent) {
-		pr_debug("debugfs: Ah! can not find a parent!\n");
-		return -EFAULT;
-	}
+	if (!parent)
+		parent = debugfs_mount->mnt_sb->s_root;
 
 	*dentry = NULL;
 	mutex_lock(&parent->d_inode->i_mutex);
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index fbb6e5e..7cb0a59 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -1748,7 +1748,7 @@
 			    char *cipher_name, size_t *key_size)
 {
 	char dummy_key[ECRYPTFS_MAX_KEY_BYTES];
-	char *full_alg_name;
+	char *full_alg_name = NULL;
 	int rc;
 
 	*key_tfm = NULL;
@@ -1763,7 +1763,6 @@
 	if (rc)
 		goto out;
 	*key_tfm = crypto_alloc_blkcipher(full_alg_name, 0, CRYPTO_ALG_ASYNC);
-	kfree(full_alg_name);
 	if (IS_ERR(*key_tfm)) {
 		rc = PTR_ERR(*key_tfm);
 		printk(KERN_ERR "Unable to allocate crypto cipher with name "
@@ -1786,6 +1785,7 @@
 		goto out;
 	}
 out:
+	kfree(full_alg_name);
 	return rc;
 }
 
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 9e94405..678172b 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -158,7 +158,7 @@
 	struct dentry *ecryptfs_dentry = file->f_path.dentry;
 	/* Private value of ecryptfs_dentry allocated in
 	 * ecryptfs_lookup() */
-	struct dentry *lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
+	struct dentry *lower_dentry;
 	struct ecryptfs_file_info *file_info;
 
 	mount_crypt_stat = &ecryptfs_superblock_to_private(
@@ -191,13 +191,6 @@
 				      | ECRYPTFS_ENCRYPTED);
 	}
 	mutex_unlock(&crypt_stat->cs_mutex);
-	if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
-	    && !(file->f_flags & O_RDONLY)) {
-		rc = -EPERM;
-		printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
-		       "file must hence be opened RO\n", __func__);
-		goto out;
-	}
 	if (!ecryptfs_inode_to_private(inode)->lower_file) {
 		rc = ecryptfs_init_persistent_file(ecryptfs_dentry);
 		if (rc) {
@@ -208,6 +201,13 @@
 			goto out;
 		}
 	}
+	if ((ecryptfs_inode_to_private(inode)->lower_file->f_flags & O_RDONLY)
+	    && !(file->f_flags & O_RDONLY)) {
+		rc = -EPERM;
+		printk(KERN_WARNING "%s: Lower persistent file is RO; eCryptfs "
+		       "file must hence be opened RO\n", __func__);
+		goto out;
+	}
 	ecryptfs_set_file_lower(
 		file, ecryptfs_inode_to_private(inode)->lower_file);
 	if (S_ISDIR(ecryptfs_dentry->d_inode->i_mode)) {
@@ -299,7 +299,6 @@
 const struct file_operations ecryptfs_dir_fops = {
 	.readdir = ecryptfs_readdir,
 	.ioctl = ecryptfs_ioctl,
-	.mmap = generic_file_mmap,
 	.open = ecryptfs_open,
 	.flush = ecryptfs_flush,
 	.release = ecryptfs_release,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 429ca0b..4a430ab 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -282,7 +282,8 @@
 		goto out;
 	}
 	rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry,
-				ecryptfs_dir_inode->i_sb, 1);
+				ecryptfs_dir_inode->i_sb,
+				ECRYPTFS_INTERPOSE_FLAG_D_ADD);
 	if (rc) {
 		printk(KERN_ERR "%s: Error interposing; rc = [%d]\n",
 		       __func__, rc);
@@ -463,9 +464,6 @@
 	unlock_dir(lower_dir_dentry);
 	dput(lower_new_dentry);
 	dput(lower_old_dentry);
-	d_drop(lower_old_dentry);
-	d_drop(new_dentry);
-	d_drop(old_dentry);
 	return rc;
 }
 
@@ -614,6 +612,7 @@
 	struct dentry *lower_new_dentry;
 	struct dentry *lower_old_dir_dentry;
 	struct dentry *lower_new_dir_dentry;
+	struct dentry *trap = NULL;
 
 	lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry);
 	lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry);
@@ -621,7 +620,17 @@
 	dget(lower_new_dentry);
 	lower_old_dir_dentry = dget_parent(lower_old_dentry);
 	lower_new_dir_dentry = dget_parent(lower_new_dentry);
-	lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
+	trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry);
+	/* source should not be ancestor of target */
+	if (trap == lower_old_dentry) {
+		rc = -EINVAL;
+		goto out_lock;
+	}
+	/* target should not be ancestor of source */
+	if (trap == lower_new_dentry) {
+		rc = -ENOTEMPTY;
+		goto out_lock;
+	}
 	rc = vfs_rename(lower_old_dir_dentry->d_inode, lower_old_dentry,
 			lower_new_dir_dentry->d_inode, lower_new_dentry);
 	if (rc)
@@ -715,31 +724,31 @@
 	/* Released in ecryptfs_put_link(); only release here on error */
 	buf = kmalloc(len, GFP_KERNEL);
 	if (!buf) {
-		rc = -ENOMEM;
+		buf = ERR_PTR(-ENOMEM);
 		goto out;
 	}
 	old_fs = get_fs();
 	set_fs(get_ds());
 	rc = dentry->d_inode->i_op->readlink(dentry, (char __user *)buf, len);
 	set_fs(old_fs);
-	if (rc < 0)
-		goto out_free;
-	else
+	if (rc < 0) {
+		kfree(buf);
+		buf = ERR_PTR(rc);
+	} else
 		buf[rc] = '\0';
-	rc = 0;
-	nd_set_link(nd, buf);
-	goto out;
-out_free:
-	kfree(buf);
 out:
-	return ERR_PTR(rc);
+	nd_set_link(nd, buf);
+	return NULL;
 }
 
 static void
 ecryptfs_put_link(struct dentry *dentry, struct nameidata *nd, void *ptr)
 {
-	/* Free the char* */
-	kfree(nd_get_link(nd));
+	char *buf = nd_get_link(nd);
+	if (!IS_ERR(buf)) {
+		/* Free the char* */
+		kfree(buf);
+	}
 }
 
 /**
@@ -772,18 +781,23 @@
 }
 
 /**
- * ecryptfs_truncate
+ * truncate_upper
  * @dentry: The ecryptfs layer dentry
- * @new_length: The length to expand the file to
+ * @ia: Address of the ecryptfs inode's attributes
+ * @lower_ia: Address of the lower inode's attributes
  *
  * Function to handle truncations modifying the size of the file. Note
  * that the file sizes are interpolated. When expanding, we are simply
- * writing strings of 0's out. When truncating, we need to modify the
- * underlying file size according to the page index interpolations.
+ * writing strings of 0's out. When truncating, we truncate the upper
+ * inode and update the lower_ia according to the page index
+ * interpolations. If ATTR_SIZE is set in lower_ia->ia_valid upon return,
+ * the caller must use lower_ia in a call to notify_change() to perform
+ * the truncation of the lower inode.
  *
  * Returns zero on success; non-zero otherwise
  */
-int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
+static int truncate_upper(struct dentry *dentry, struct iattr *ia,
+			  struct iattr *lower_ia)
 {
 	int rc = 0;
 	struct inode *inode = dentry->d_inode;
@@ -794,8 +808,10 @@
 	loff_t lower_size_before_truncate;
 	loff_t lower_size_after_truncate;
 
-	if (unlikely((new_length == i_size)))
+	if (unlikely((ia->ia_size == i_size))) {
+		lower_ia->ia_valid &= ~ATTR_SIZE;
 		goto out;
+	}
 	crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
 	/* Set up a fake ecryptfs file, this is used to interface with
 	 * the file in the underlying filesystem so that the
@@ -815,28 +831,30 @@
 		&fake_ecryptfs_file,
 		ecryptfs_inode_to_private(dentry->d_inode)->lower_file);
 	/* Switch on growing or shrinking file */
-	if (new_length > i_size) {
+	if (ia->ia_size > i_size) {
 		char zero[] = { 0x00 };
 
+		lower_ia->ia_valid &= ~ATTR_SIZE;
 		/* Write a single 0 at the last position of the file;
 		 * this triggers code that will fill in 0's throughout
 		 * the intermediate portion of the previous end of the
 		 * file and the new and of the file */
 		rc = ecryptfs_write(&fake_ecryptfs_file, zero,
-				    (new_length - 1), 1);
-	} else { /* new_length < i_size_read(inode) */
-		/* We're chopping off all the pages down do the page
-		 * in which new_length is located. Fill in the end of
-		 * that page from (new_length & ~PAGE_CACHE_MASK) to
+				    (ia->ia_size - 1), 1);
+	} else { /* ia->ia_size < i_size_read(inode) */
+		/* We're chopping off all the pages down to the page
+		 * in which ia->ia_size is located. Fill in the end of
+		 * that page from (ia->ia_size & ~PAGE_CACHE_MASK) to
 		 * PAGE_CACHE_SIZE with zeros. */
 		size_t num_zeros = (PAGE_CACHE_SIZE
-				    - (new_length & ~PAGE_CACHE_MASK));
+				    - (ia->ia_size & ~PAGE_CACHE_MASK));
 
 		if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
-			rc = vmtruncate(inode, new_length);
+			rc = vmtruncate(inode, ia->ia_size);
 			if (rc)
 				goto out_free;
-			rc = vmtruncate(lower_dentry->d_inode, new_length);
+			lower_ia->ia_size = ia->ia_size;
+			lower_ia->ia_valid |= ATTR_SIZE;
 			goto out_free;
 		}
 		if (num_zeros) {
@@ -848,7 +866,7 @@
 				goto out_free;
 			}
 			rc = ecryptfs_write(&fake_ecryptfs_file, zeros_virt,
-					    new_length, num_zeros);
+					    ia->ia_size, num_zeros);
 			kfree(zeros_virt);
 			if (rc) {
 				printk(KERN_ERR "Error attempting to zero out "
@@ -857,7 +875,7 @@
 				goto out_free;
 			}
 		}
-		vmtruncate(inode, new_length);
+		vmtruncate(inode, ia->ia_size);
 		rc = ecryptfs_write_inode_size_to_metadata(inode);
 		if (rc) {
 			printk(KERN_ERR	"Problem with "
@@ -870,10 +888,12 @@
 		lower_size_before_truncate =
 		    upper_size_to_lower_size(crypt_stat, i_size);
 		lower_size_after_truncate =
-		    upper_size_to_lower_size(crypt_stat, new_length);
-		if (lower_size_after_truncate < lower_size_before_truncate)
-			vmtruncate(lower_dentry->d_inode,
-				   lower_size_after_truncate);
+		    upper_size_to_lower_size(crypt_stat, ia->ia_size);
+		if (lower_size_after_truncate < lower_size_before_truncate) {
+			lower_ia->ia_size = lower_size_after_truncate;
+			lower_ia->ia_valid |= ATTR_SIZE;
+		} else
+			lower_ia->ia_valid &= ~ATTR_SIZE;
 	}
 out_free:
 	if (ecryptfs_file_to_private(&fake_ecryptfs_file))
@@ -883,6 +903,33 @@
 	return rc;
 }
 
+/**
+ * ecryptfs_truncate
+ * @dentry: The ecryptfs layer dentry
+ * @new_length: The length to expand the file to
+ *
+ * Simple function that handles the truncation of an eCryptfs inode and
+ * its corresponding lower inode.
+ *
+ * Returns zero on success; non-zero otherwise
+ */
+int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
+{
+	struct iattr ia = { .ia_valid = ATTR_SIZE, .ia_size = new_length };
+	struct iattr lower_ia = { .ia_valid = 0 };
+	int rc;
+
+	rc = truncate_upper(dentry, &ia, &lower_ia);
+	if (!rc && lower_ia.ia_valid & ATTR_SIZE) {
+		struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+
+		mutex_lock(&lower_dentry->d_inode->i_mutex);
+		rc = notify_change(lower_dentry, &lower_ia);
+		mutex_unlock(&lower_dentry->d_inode->i_mutex);
+	}
+	return rc;
+}
+
 static int
 ecryptfs_permission(struct inode *inode, int mask)
 {
@@ -905,6 +952,7 @@
 {
 	int rc = 0;
 	struct dentry *lower_dentry;
+	struct iattr lower_ia;
 	struct inode *inode;
 	struct inode *lower_inode;
 	struct ecryptfs_crypt_stat *crypt_stat;
@@ -943,15 +991,11 @@
 		}
 	}
 	mutex_unlock(&crypt_stat->cs_mutex);
+	memcpy(&lower_ia, ia, sizeof(lower_ia));
+	if (ia->ia_valid & ATTR_FILE)
+		lower_ia.ia_file = ecryptfs_file_to_lower(ia->ia_file);
 	if (ia->ia_valid & ATTR_SIZE) {
-		ecryptfs_printk(KERN_DEBUG,
-				"ia->ia_valid = [0x%x] ATTR_SIZE" " = [0x%x]\n",
-				ia->ia_valid, ATTR_SIZE);
-		rc = ecryptfs_truncate(dentry, ia->ia_size);
-		/* ecryptfs_truncate handles resizing of the lower file */
-		ia->ia_valid &= ~ATTR_SIZE;
-		ecryptfs_printk(KERN_DEBUG, "ia->ia_valid = [%x]\n",
-				ia->ia_valid);
+		rc = truncate_upper(dentry, ia, &lower_ia);
 		if (rc < 0)
 			goto out;
 	}
@@ -960,17 +1004,32 @@
 	 * mode change is for clearing setuid/setgid bits. Allow lower fs
 	 * to interpret this in its own way.
 	 */
-	if (ia->ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID))
-		ia->ia_valid &= ~ATTR_MODE;
+	if (lower_ia.ia_valid & (ATTR_KILL_SUID | ATTR_KILL_SGID))
+		lower_ia.ia_valid &= ~ATTR_MODE;
 
 	mutex_lock(&lower_dentry->d_inode->i_mutex);
-	rc = notify_change(lower_dentry, ia);
+	rc = notify_change(lower_dentry, &lower_ia);
 	mutex_unlock(&lower_dentry->d_inode->i_mutex);
 out:
 	fsstack_copy_attr_all(inode, lower_inode);
 	return rc;
 }
 
+int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
+		     struct kstat *stat)
+{
+	struct kstat lower_stat;
+	int rc;
+
+	rc = vfs_getattr(ecryptfs_dentry_to_lower_mnt(dentry),
+			 ecryptfs_dentry_to_lower(dentry), &lower_stat);
+	if (!rc) {
+		generic_fillattr(dentry->d_inode, stat);
+		stat->blocks = lower_stat.blocks;
+	}
+	return rc;
+}
+
 int
 ecryptfs_setxattr(struct dentry *dentry, const char *name, const void *value,
 		  size_t size, int flags)
@@ -1100,6 +1159,7 @@
 const struct inode_operations ecryptfs_main_iops = {
 	.permission = ecryptfs_permission,
 	.setattr = ecryptfs_setattr,
+	.getattr = ecryptfs_getattr,
 	.setxattr = ecryptfs_setxattr,
 	.getxattr = ecryptfs_getxattr,
 	.listxattr = ecryptfs_listxattr,
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 567bc4b..ea2f921 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -585,8 +585,8 @@
  *                        with as much information as it can before needing
  *                        the lower filesystem.
  * ecryptfs_read_super(): this accesses the lower filesystem and uses
- *                        ecryptfs_interpolate to perform most of the linking
- * ecryptfs_interpolate(): links the lower filesystem into ecryptfs
+ *                        ecryptfs_interpose to perform most of the linking
+ * ecryptfs_interpose(): links the lower filesystem into ecryptfs (inode.c)
  */
 static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags,
 			const char *dev_name, void *raw_data,
diff --git a/fs/eventfd.c b/fs/eventfd.c
index d26402f..7758cc3 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -135,26 +135,71 @@
 	return events;
 }
 
-static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
-			    loff_t *ppos)
+static void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt)
 {
-	struct eventfd_ctx *ctx = file->private_data;
+	*cnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count;
+	ctx->count -= *cnt;
+}
+
+/**
+ * eventfd_ctx_remove_wait_queue - Read the current counter and removes wait queue.
+ * @ctx: [in] Pointer to eventfd context.
+ * @wait: [in] Wait queue to be removed.
+ * @cnt: [out] Pointer to the 64bit conter value.
+ *
+ * Returns zero if successful, or the following error codes:
+ *
+ * -EAGAIN      : The operation would have blocked.
+ *
+ * This is used to atomically remove a wait queue entry from the eventfd wait
+ * queue head, and read/reset the counter value.
+ */
+int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
+				  __u64 *cnt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctx->wqh.lock, flags);
+	eventfd_ctx_do_read(ctx, cnt);
+	__remove_wait_queue(&ctx->wqh, wait);
+	if (*cnt != 0 && waitqueue_active(&ctx->wqh))
+		wake_up_locked_poll(&ctx->wqh, POLLOUT);
+	spin_unlock_irqrestore(&ctx->wqh.lock, flags);
+
+	return *cnt != 0 ? 0 : -EAGAIN;
+}
+EXPORT_SYMBOL_GPL(eventfd_ctx_remove_wait_queue);
+
+/**
+ * eventfd_ctx_read - Reads the eventfd counter or wait if it is zero.
+ * @ctx: [in] Pointer to eventfd context.
+ * @no_wait: [in] Different from zero if the operation should not block.
+ * @cnt: [out] Pointer to the 64bit conter value.
+ *
+ * Returns zero if successful, or the following error codes:
+ *
+ * -EAGAIN      : The operation would have blocked but @no_wait was nonzero.
+ * -ERESTARTSYS : A signal interrupted the wait operation.
+ *
+ * If @no_wait is zero, the function might sleep until the eventfd internal
+ * counter becomes greater than zero.
+ */
+ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt)
+{
 	ssize_t res;
-	__u64 ucnt = 0;
 	DECLARE_WAITQUEUE(wait, current);
 
-	if (count < sizeof(ucnt))
-		return -EINVAL;
 	spin_lock_irq(&ctx->wqh.lock);
+	*cnt = 0;
 	res = -EAGAIN;
 	if (ctx->count > 0)
-		res = sizeof(ucnt);
-	else if (!(file->f_flags & O_NONBLOCK)) {
+		res = 0;
+	else if (!no_wait) {
 		__add_wait_queue(&ctx->wqh, &wait);
-		for (res = 0;;) {
+		for (;;) {
 			set_current_state(TASK_INTERRUPTIBLE);
 			if (ctx->count > 0) {
-				res = sizeof(ucnt);
+				res = 0;
 				break;
 			}
 			if (signal_pending(current)) {
@@ -168,18 +213,32 @@
 		__remove_wait_queue(&ctx->wqh, &wait);
 		__set_current_state(TASK_RUNNING);
 	}
-	if (likely(res > 0)) {
-		ucnt = (ctx->flags & EFD_SEMAPHORE) ? 1 : ctx->count;
-		ctx->count -= ucnt;
+	if (likely(res == 0)) {
+		eventfd_ctx_do_read(ctx, cnt);
 		if (waitqueue_active(&ctx->wqh))
 			wake_up_locked_poll(&ctx->wqh, POLLOUT);
 	}
 	spin_unlock_irq(&ctx->wqh.lock);
-	if (res > 0 && put_user(ucnt, (__u64 __user *) buf))
-		return -EFAULT;
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(eventfd_ctx_read);
+
+static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count,
+			    loff_t *ppos)
+{
+	struct eventfd_ctx *ctx = file->private_data;
+	ssize_t res;
+	__u64 cnt;
+
+	if (count < sizeof(cnt))
+		return -EINVAL;
+	res = eventfd_ctx_read(ctx, file->f_flags & O_NONBLOCK, &cnt);
+	if (res < 0)
+		return res;
+
+	return put_user(cnt, (__u64 __user *) buf) ? -EFAULT : sizeof(cnt);
+}
 
 static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t count,
 			     loff_t *ppos)
diff --git a/fs/exec.c b/fs/exec.c
index 632b02e..cce6bbd 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -571,6 +571,9 @@
 	struct vm_area_struct *prev = NULL;
 	unsigned long vm_flags;
 	unsigned long stack_base;
+	unsigned long stack_size;
+	unsigned long stack_expand;
+	unsigned long rlim_stack;
 
 #ifdef CONFIG_STACK_GROWSUP
 	/* Limit stack size to 1GB */
@@ -627,10 +630,23 @@
 			goto out_unlock;
 	}
 
+	stack_expand = EXTRA_STACK_VM_PAGES * PAGE_SIZE;
+	stack_size = vma->vm_end - vma->vm_start;
+	/*
+	 * Align this down to a page boundary as expand_stack
+	 * will align it up.
+	 */
+	rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK;
 #ifdef CONFIG_STACK_GROWSUP
-	stack_base = vma->vm_end + EXTRA_STACK_VM_PAGES * PAGE_SIZE;
+	if (stack_size + stack_expand > rlim_stack)
+		stack_base = vma->vm_start + rlim_stack;
+	else
+		stack_base = vma->vm_end + stack_expand;
 #else
-	stack_base = vma->vm_start - EXTRA_STACK_VM_PAGES * PAGE_SIZE;
+	if (stack_size + stack_expand > rlim_stack)
+		stack_base = vma->vm_end - rlim_stack;
+	else
+		stack_base = vma->vm_start - stack_expand;
 #endif
 	ret = expand_stack(vma, stack_base);
 	if (ret)
@@ -941,9 +957,7 @@
 
 int flush_old_exec(struct linux_binprm * bprm)
 {
-	char * name;
-	int i, ch, retval;
-	char tcomm[sizeof(current->comm)];
+	int retval;
 
 	/*
 	 * Make sure we have a private signal table and that
@@ -964,6 +978,25 @@
 
 	bprm->mm = NULL;		/* We're using it now */
 
+	current->flags &= ~PF_RANDOMIZE;
+	flush_thread();
+	current->personality &= ~bprm->per_clear;
+
+	return 0;
+
+out:
+	return retval;
+}
+EXPORT_SYMBOL(flush_old_exec);
+
+void setup_new_exec(struct linux_binprm * bprm)
+{
+	int i, ch;
+	char * name;
+	char tcomm[sizeof(current->comm)];
+
+	arch_pick_mmap_layout(current->mm);
+
 	/* This is the point of no return */
 	current->sas_ss_sp = current->sas_ss_size = 0;
 
@@ -985,9 +1018,6 @@
 	tcomm[i] = '\0';
 	set_task_comm(current, tcomm);
 
-	current->flags &= ~PF_RANDOMIZE;
-	flush_thread();
-
 	/* Set the new mm task size. We have to do that late because it may
 	 * depend on TIF_32BIT which is only updated in flush_thread() on
 	 * some architectures like powerpc
@@ -1003,8 +1033,6 @@
 		set_dumpable(current->mm, suid_dumpable);
 	}
 
-	current->personality &= ~bprm->per_clear;
-
 	/*
 	 * Flush performance counters when crossing a
 	 * security domain:
@@ -1019,14 +1047,8 @@
 			
 	flush_signal_handlers(current, 0);
 	flush_old_files(current->files);
-
-	return 0;
-
-out:
-	return retval;
 }
-
-EXPORT_SYMBOL(flush_old_exec);
+EXPORT_SYMBOL(setup_new_exec);
 
 /*
  * Prepare credentials and lock ->cred_guard_mutex.
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index af7b626..874d169 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -361,14 +361,11 @@
 	   so set the magic i_delalloc_reserve_flag after taking the 
 	   inode allocation semaphore for */
 #define EXT4_GET_BLOCKS_DELALLOC_RESERVE	0x0004
-	/* Call ext4_da_update_reserve_space() after successfully 
-	   allocating the blocks */
-#define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE	0x0008
 	/* caller is from the direct IO path, request to creation of an
 	unitialized extents if not allocated, split the uninitialized
 	extent if blocks has been preallocated already*/
-#define EXT4_GET_BLOCKS_DIO			0x0010
-#define EXT4_GET_BLOCKS_CONVERT			0x0020
+#define EXT4_GET_BLOCKS_DIO			0x0008
+#define EXT4_GET_BLOCKS_CONVERT			0x0010
 #define EXT4_GET_BLOCKS_DIO_CREATE_EXT		(EXT4_GET_BLOCKS_DIO|\
 					 EXT4_GET_BLOCKS_CREATE_UNINIT_EXT)
 	/* Convert extent to initialized after direct IO complete */
@@ -1443,6 +1440,8 @@
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
 extern qsize_t *ext4_get_reserved_space(struct inode *inode);
 extern int flush_aio_dio_completed_IO(struct inode *inode);
+extern void ext4_da_update_reserve_space(struct inode *inode,
+					int used, int quota_claim);
 /* ioctl.c */
 extern long ext4_ioctl(struct file *, unsigned int, unsigned long);
 extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 7d7b74e..765a482 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3132,7 +3132,19 @@
 		unmap_underlying_metadata_blocks(inode->i_sb->s_bdev,
 					newblock + max_blocks,
 					allocated - max_blocks);
+		allocated = max_blocks;
 	}
+
+	/*
+	 * If we have done fallocate with the offset that is already
+	 * delayed allocated, we would have block reservation
+	 * and quota reservation done in the delayed write path.
+	 * But fallocate would have already updated quota and block
+	 * count for this offset. So cancel these reservation
+	 */
+	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+		ext4_da_update_reserve_space(inode, allocated, 0);
+
 map_out:
 	set_buffer_mapped(bh_result);
 out1:
@@ -3368,9 +3380,18 @@
 	/* previous routine could use block we allocated */
 	newblock = ext_pblock(&newex);
 	allocated = ext4_ext_get_actual_len(&newex);
+	if (allocated > max_blocks)
+		allocated = max_blocks;
 	set_buffer_new(bh_result);
 
 	/*
+	 * Update reserved blocks/metadata blocks after successful
+	 * block allocation which had been deferred till now.
+	 */
+	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+		ext4_da_update_reserve_space(inode, allocated, 1);
+
+	/*
 	 * Cache the extent and update transaction to commit on fdatasync only
 	 * when it is _not_ an uninitialized extent.
 	 */
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index c818972..e119524 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1053,11 +1053,12 @@
  * Called with i_data_sem down, which is important since we can call
  * ext4_discard_preallocations() from here.
  */
-static void ext4_da_update_reserve_space(struct inode *inode, int used)
+void ext4_da_update_reserve_space(struct inode *inode,
+					int used, int quota_claim)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	struct ext4_inode_info *ei = EXT4_I(inode);
-	int mdb_free = 0;
+	int mdb_free = 0, allocated_meta_blocks = 0;
 
 	spin_lock(&ei->i_block_reservation_lock);
 	if (unlikely(used > ei->i_reserved_data_blocks)) {
@@ -1073,6 +1074,7 @@
 	ei->i_reserved_data_blocks -= used;
 	used += ei->i_allocated_meta_blocks;
 	ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks;
+	allocated_meta_blocks = ei->i_allocated_meta_blocks;
 	ei->i_allocated_meta_blocks = 0;
 	percpu_counter_sub(&sbi->s_dirtyblocks_counter, used);
 
@@ -1090,9 +1092,23 @@
 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 
 	/* Update quota subsystem */
-	vfs_dq_claim_block(inode, used);
-	if (mdb_free)
-		vfs_dq_release_reservation_block(inode, mdb_free);
+	if (quota_claim) {
+		vfs_dq_claim_block(inode, used);
+		if (mdb_free)
+			vfs_dq_release_reservation_block(inode, mdb_free);
+	} else {
+		/*
+		 * We did fallocate with an offset that is already delayed
+		 * allocated. So on delayed allocated writeback we should
+		 * not update the quota for allocated blocks. But then
+		 * converting an fallocate region to initialized region would
+		 * have caused a metadata allocation. So claim quota for
+		 * that
+		 */
+		if (allocated_meta_blocks)
+			vfs_dq_claim_block(inode, allocated_meta_blocks);
+		vfs_dq_release_reservation_block(inode, mdb_free + used);
+	}
 
 	/*
 	 * If we have done all the pending block allocations and if
@@ -1292,18 +1308,20 @@
 			 */
 			EXT4_I(inode)->i_state &= ~EXT4_STATE_EXT_MIGRATE;
 		}
-	}
 
+		/*
+		 * Update reserved blocks/metadata blocks after successful
+		 * block allocation which had been deferred till now. We don't
+		 * support fallocate for non extent files. So we can update
+		 * reserve space here.
+		 */
+		if ((retval > 0) &&
+			(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE))
+			ext4_da_update_reserve_space(inode, retval, 1);
+	}
 	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
 		EXT4_I(inode)->i_delalloc_reserved_flag = 0;
 
-	/*
-	 * Update reserved blocks/metadata blocks after successful
-	 * block allocation which had been deferred till now.
-	 */
-	if ((retval > 0) && (flags & EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE))
-		ext4_da_update_reserve_space(inode, retval);
-
 	up_write((&EXT4_I(inode)->i_data_sem));
 	if (retval > 0 && buffer_mapped(bh)) {
 		int ret = check_block_validity(inode, "file system "
@@ -1835,24 +1853,12 @@
 	 * later. Real quota accounting is done at pages writeout
 	 * time.
 	 */
-	if (vfs_dq_reserve_block(inode, md_needed + 1)) {
-		/* 
-		 * We tend to badly over-estimate the amount of
-		 * metadata blocks which are needed, so if we have
-		 * reserved any metadata blocks, try to force out the
-		 * inode and see if we have any better luck.
-		 */
-		if (md_reserved && retries++ <= 3)
-			goto retry;
+	if (vfs_dq_reserve_block(inode, md_needed + 1))
 		return -EDQUOT;
-	}
 
 	if (ext4_claim_free_blocks(sbi, md_needed + 1)) {
 		vfs_dq_release_reservation_block(inode, md_needed + 1);
 		if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
-		retry:
-			if (md_reserved)
-				write_inode_now(inode, (retries == 3));
 			yield();
 			goto repeat;
 		}
@@ -2213,10 +2219,10 @@
 	 * variables are updated after the blocks have been allocated.
 	 */
 	new.b_state = 0;
-	get_blocks_flags = (EXT4_GET_BLOCKS_CREATE |
-			    EXT4_GET_BLOCKS_DELALLOC_RESERVE);
+	get_blocks_flags = EXT4_GET_BLOCKS_CREATE;
 	if (mpd->b_state & (1 << BH_Delay))
-		get_blocks_flags |= EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE;
+		get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE;
+
 	blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks,
 			       &new, get_blocks_flags);
 	if (blks < 0) {
@@ -3032,7 +3038,7 @@
 			       loff_t pos, unsigned len, unsigned flags,
 			       struct page **pagep, void **fsdata)
 {
-	int ret, retries = 0;
+	int ret, retries = 0, quota_retries = 0;
 	struct page *page;
 	pgoff_t index;
 	unsigned from, to;
@@ -3091,6 +3097,22 @@
 
 	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
 		goto retry;
+
+	if ((ret == -EDQUOT) &&
+	    EXT4_I(inode)->i_reserved_meta_blocks &&
+	    (quota_retries++ < 3)) {
+		/*
+		 * Since we often over-estimate the number of meta
+		 * data blocks required, we may sometimes get a
+		 * spurios out of quota error even though there would
+		 * be enough space once we write the data blocks and
+		 * find out how many meta data blocks were _really_
+		 * required.  So try forcing the inode write to see if
+		 * that helps.
+		 */
+		write_inode_now(inode, (quota_retries == 3));
+		goto retry;
+	}
 out:
 	return ret;
 }
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 2cf93ec..97e01dc 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -618,60 +618,90 @@
 static struct kmem_cache *fasync_cache __read_mostly;
 
 /*
- * fasync_helper() is used by almost all character device drivers
- * to set up the fasync queue. It returns negative on error, 0 if it did
- * no changes and positive if it added/deleted the entry.
+ * Remove a fasync entry. If successfully removed, return
+ * positive and clear the FASYNC flag. If no entry exists,
+ * do nothing and return 0.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ *
+ * We always take the 'filp->f_lock', in since fasync_lock
+ * needs to be irq-safe.
  */
-int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+static int fasync_remove_entry(struct file *filp, struct fasync_struct **fapp)
 {
 	struct fasync_struct *fa, **fp;
-	struct fasync_struct *new = NULL;
 	int result = 0;
 
-	if (on) {
-		new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
-		if (!new)
-			return -ENOMEM;
-	}
-
-	/*
-	 * We need to take f_lock first since it's not an IRQ-safe
-	 * lock.
-	 */
 	spin_lock(&filp->f_lock);
 	write_lock_irq(&fasync_lock);
 	for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
-		if (fa->fa_file == filp) {
-			if(on) {
-				fa->fa_fd = fd;
-				kmem_cache_free(fasync_cache, new);
-			} else {
-				*fp = fa->fa_next;
-				kmem_cache_free(fasync_cache, fa);
-				result = 1;
-			}
-			goto out;
-		}
-	}
-
-	if (on) {
-		new->magic = FASYNC_MAGIC;
-		new->fa_file = filp;
-		new->fa_fd = fd;
-		new->fa_next = *fapp;
-		*fapp = new;
-		result = 1;
-	}
-out:
-	if (on)
-		filp->f_flags |= FASYNC;
-	else
+		if (fa->fa_file != filp)
+			continue;
+		*fp = fa->fa_next;
+		kmem_cache_free(fasync_cache, fa);
 		filp->f_flags &= ~FASYNC;
+		result = 1;
+		break;
+	}
 	write_unlock_irq(&fasync_lock);
 	spin_unlock(&filp->f_lock);
 	return result;
 }
 
+/*
+ * Add a fasync entry. Return negative on error, positive if
+ * added, and zero if did nothing but change an existing one.
+ *
+ * NOTE! It is very important that the FASYNC flag always
+ * match the state "is the filp on a fasync list".
+ */
+static int fasync_add_entry(int fd, struct file *filp, struct fasync_struct **fapp)
+{
+	struct fasync_struct *new, *fa, **fp;
+	int result = 0;
+
+	new = kmem_cache_alloc(fasync_cache, GFP_KERNEL);
+	if (!new)
+		return -ENOMEM;
+
+	spin_lock(&filp->f_lock);
+	write_lock_irq(&fasync_lock);
+	for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
+		if (fa->fa_file != filp)
+			continue;
+		fa->fa_fd = fd;
+		kmem_cache_free(fasync_cache, new);
+		goto out;
+	}
+
+	new->magic = FASYNC_MAGIC;
+	new->fa_file = filp;
+	new->fa_fd = fd;
+	new->fa_next = *fapp;
+	*fapp = new;
+	result = 1;
+	filp->f_flags |= FASYNC;
+
+out:
+	write_unlock_irq(&fasync_lock);
+	spin_unlock(&filp->f_lock);
+	return result;
+}
+
+/*
+ * fasync_helper() is used by almost all character device drivers
+ * to set up the fasync queue, and for regular files by the file
+ * lease code. It returns negative on error, 0 if it did no changes
+ * and positive if it added/deleted the entry.
+ */
+int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
+{
+	if (!on)
+		return fasync_remove_entry(filp, fapp);
+	return fasync_add_entry(fd, filp, fapp);
+}
+
 EXPORT_SYMBOL(fasync_helper);
 
 void __kill_fasync(struct fasync_struct *fa, int sig, int band)
diff --git a/fs/file_table.c b/fs/file_table.c
index 69652c5..b98404b 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -253,6 +253,7 @@
 	if (file->f_op && file->f_op->release)
 		file->f_op->release(inode, file);
 	security_file_free(file);
+	ima_file_free(file);
 	if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL))
 		cdev_put(inode->i_cdev);
 	fops_put(file->f_op);
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index c18913a..a9f5e13 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -828,6 +828,9 @@
 		if (!page)
 			break;
 
+		if (mapping_writably_mapped(mapping))
+			flush_dcache_page(page);
+
 		pagefault_disable();
 		tmp = iov_iter_copy_from_user_atomic(page, ii, offset, bytes);
 		pagefault_enable();
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 6d47379..583e823 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -541,7 +541,7 @@
 				*ptr++ = cpu_to_be64(bn++);
 			break;
 		}
-	} while (state != ALLOC_DATA);
+	} while ((state != ALLOC_DATA) || !dblock);
 
 	ip->i_height = height;
 	gfs2_add_inode_blocks(&ip->i_inode, alloced);
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index f455a03..f426633 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -769,6 +769,7 @@
 	if (!gl)
 		return -ENOMEM;
 
+	atomic_inc(&sdp->sd_glock_disposal);
 	gl->gl_flags = 0;
 	gl->gl_name = name;
 	atomic_set(&gl->gl_ref, 1);
@@ -1538,6 +1539,9 @@
 		up_write(&gfs2_umount_flush_sem);
 		msleep(10);
 	}
+	flush_workqueue(glock_workqueue);
+	wait_event(sdp->sd_glock_wait, atomic_read(&sdp->sd_glock_disposal) == 0);
+	gfs2_dump_lockstate(sdp);
 }
 
 void gfs2_glock_finish_truncate(struct gfs2_inode *ip)
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index 13f0bd2..c0262fa 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -123,7 +123,7 @@
 	int (*lm_mount) (struct gfs2_sbd *sdp, const char *fsname);
  	void (*lm_unmount) (struct gfs2_sbd *sdp);
 	void (*lm_withdraw) (struct gfs2_sbd *sdp);
-	void (*lm_put_lock) (struct kmem_cache *cachep, void *gl);
+	void (*lm_put_lock) (struct kmem_cache *cachep, struct gfs2_glock *gl);
 	unsigned int (*lm_lock) (struct gfs2_glock *gl,
 				 unsigned int req_state, unsigned int flags);
 	void (*lm_cancel) (struct gfs2_glock *gl);
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 4792200..bc0ad15 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -544,6 +544,8 @@
 	struct gfs2_holder sd_live_gh;
 	struct gfs2_glock *sd_rename_gl;
 	struct gfs2_glock *sd_trans_gl;
+	wait_queue_head_t sd_glock_wait;
+	atomic_t sd_glock_disposal;
 
 	/* Inode Stuff */
 
diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c
index 46df988..0e5e0e7 100644
--- a/fs/gfs2/lock_dlm.c
+++ b/fs/gfs2/lock_dlm.c
@@ -21,6 +21,7 @@
 {
 	struct gfs2_glock *gl = arg;
 	unsigned ret = gl->gl_state;
+	struct gfs2_sbd *sdp = gl->gl_sbd;
 
 	BUG_ON(gl->gl_lksb.sb_flags & DLM_SBF_DEMOTED);
 
@@ -30,6 +31,8 @@
 	switch (gl->gl_lksb.sb_status) {
 	case -DLM_EUNLOCK: /* Unlocked, so glock can be freed */
 		kmem_cache_free(gfs2_glock_cachep, gl);
+		if (atomic_dec_and_test(&sdp->sd_glock_disposal))
+			wake_up(&sdp->sd_glock_wait);
 		return;
 	case -DLM_ECANCEL: /* Cancel while getting lock */
 		ret |= LM_OUT_CANCELED;
@@ -164,14 +167,16 @@
 	return LM_OUT_ASYNC;
 }
 
-static void gdlm_put_lock(struct kmem_cache *cachep, void *ptr)
+static void gdlm_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl)
 {
-	struct gfs2_glock *gl = ptr;
-	struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct;
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+	struct lm_lockstruct *ls = &sdp->sd_lockstruct;
 	int error;
 
 	if (gl->gl_lksb.sb_lkid == 0) {
 		kmem_cache_free(cachep, gl);
+		if (atomic_dec_and_test(&sdp->sd_glock_disposal))
+			wake_up(&sdp->sd_glock_wait);
 		return;
 	}
 
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index edfee24..a86ed63 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -82,6 +82,8 @@
 
 	gfs2_tune_init(&sdp->sd_tune);
 
+	init_waitqueue_head(&sdp->sd_glock_wait);
+	atomic_set(&sdp->sd_glock_disposal, 0);
 	spin_lock_init(&sdp->sd_statfs_spin);
 
 	spin_lock_init(&sdp->sd_rindex_spin);
@@ -723,7 +725,7 @@
 		goto fail;
 	}
 
-	error = -EINVAL;
+	error = -EUSERS;
 	if (!gfs2_jindex_size(sdp)) {
 		fs_err(sdp, "no journals!\n");
 		goto fail_jindex;
@@ -983,9 +985,17 @@
 	{ Opt_err, NULL },
 };
 
+static void nolock_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl)
+{
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+	kmem_cache_free(cachep, gl);
+	if (atomic_dec_and_test(&sdp->sd_glock_disposal))
+		wake_up(&sdp->sd_glock_wait);
+}
+
 static const struct lm_lockops nolock_ops = {
 	.lm_proto_name = "lock_nolock",
-	.lm_put_lock = kmem_cache_free,
+	.lm_put_lock = nolock_put_lock,
 	.lm_tokens = &nolock_tokens,
 };
 
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 78f73ca..84350e1 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -1088,7 +1088,8 @@
 		error = vfs_follow_link(nd, buf);
 		if (buf != array)
 			kfree(buf);
-	}
+	} else
+		path_put(&nd->path);
 
 	return ERR_PTR(error);
 }
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 0608f49..503b842 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -591,11 +591,7 @@
 	u64 rgrp_count = ip->i_disksize;
 	int error;
 
-	if (do_div(rgrp_count, sizeof(struct gfs2_rindex))) {
-		gfs2_consist_inode(ip);
-		return -EIO;
-	}
-
+	do_div(rgrp_count, sizeof(struct gfs2_rindex));
 	clear_rgrpdi(sdp);
 
 	file_ra_state_init(&ra_state, inode->i_mapping);
@@ -915,7 +911,7 @@
 struct gfs2_alloc *gfs2_alloc_get(struct gfs2_inode *ip)
 {
 	BUG_ON(ip->i_alloc != NULL);
-	ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_KERNEL);
+	ip->i_alloc = kzalloc(sizeof(struct gfs2_alloc), GFP_NOFS);
 	return ip->i_alloc;
 }
 
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index c282ad4..b9dd3da 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -21,6 +21,7 @@
 #include <linux/gfs2_ondisk.h>
 #include <linux/crc32.h>
 #include <linux/time.h>
+#include <linux/wait.h>
 
 #include "gfs2.h"
 #include "incore.h"
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index a5089a6..7239efc 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -646,22 +646,27 @@
 static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
 			  int buflen)
 {
-	struct dentry *proc_dentry;
-
-	proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+	struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
 	return proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer,
 						    buflen);
 }
 
 static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
 {
-	struct dentry *proc_dentry;
-
-	proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+	struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
 
 	return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
 }
 
+static void hppfs_put_link(struct dentry *dentry, struct nameidata *nd,
+			   void *cookie)
+{
+	struct dentry *proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
+
+	if (proc_dentry->d_inode->i_op->put_link)
+		proc_dentry->d_inode->i_op->put_link(proc_dentry, nd, cookie);
+}
+
 static const struct inode_operations hppfs_dir_iops = {
 	.lookup		= hppfs_lookup,
 };
@@ -669,6 +674,7 @@
 static const struct inode_operations hppfs_link_iops = {
 	.readlink	= hppfs_readlink,
 	.follow_link	= hppfs_follow_link,
+	.put_link	= hppfs_put_link,
 };
 
 static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
diff --git a/fs/namei.c b/fs/namei.c
index b55440b..a4855af 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -561,6 +561,7 @@
 		dget(dentry);
 	}
 	mntget(path->mnt);
+	nd->last_type = LAST_BIND;
 	cookie = dentry->d_inode->i_op->follow_link(dentry, nd);
 	error = PTR_ERR(cookie);
 	if (!IS_ERR(cookie)) {
@@ -822,6 +823,17 @@
 }
 
 /*
+ * This is a temporary kludge to deal with "automount" symlinks; proper
+ * solution is to trigger them on follow_mount(), so that do_lookup()
+ * would DTRT.  To be killed before 2.6.34-final.
+ */
+static inline int follow_on_final(struct inode *inode, unsigned lookup_flags)
+{
+	return inode && unlikely(inode->i_op->follow_link) &&
+		((lookup_flags & LOOKUP_FOLLOW) || S_ISDIR(inode->i_mode));
+}
+
+/*
  * Name resolution.
  * This is the basic name resolution function, turning a pathname into
  * the final dentry. We expect 'base' to be positive and a directory.
@@ -941,8 +953,7 @@
 		if (err)
 			break;
 		inode = next.dentry->d_inode;
-		if ((lookup_flags & LOOKUP_FOLLOW)
-		    && inode && inode->i_op->follow_link) {
+		if (follow_on_final(inode, lookup_flags)) {
 			err = do_follow_link(&next, nd);
 			if (err)
 				goto return_err;
@@ -1603,11 +1614,12 @@
 	struct file *filp;
 	struct nameidata nd;
 	int error;
-	struct path path, save;
+	struct path path;
 	struct dentry *dir;
 	int count = 0;
 	int will_truncate;
 	int flag = open_to_namei_flags(open_flag);
+	int force_reval = 0;
 
 	/*
 	 * O_SYNC is implemented as __O_SYNC|O_DSYNC.  As many places only
@@ -1619,7 +1631,7 @@
 		open_flag |= O_DSYNC;
 
 	if (!acc_mode)
-		acc_mode = MAY_OPEN | ACC_MODE(flag);
+		acc_mode = MAY_OPEN | ACC_MODE(open_flag);
 
 	/* O_TRUNC implies we need access checks for write permissions */
 	if (flag & O_TRUNC)
@@ -1659,9 +1671,12 @@
 	/*
 	 * Create - we need to know the parent.
 	 */
+reval:
 	error = path_init(dfd, pathname, LOOKUP_PARENT, &nd);
 	if (error)
 		return ERR_PTR(error);
+	if (force_reval)
+		nd.flags |= LOOKUP_REVAL;
 	error = path_walk(pathname, &nd);
 	if (error) {
 		if (nd.root.mnt)
@@ -1731,8 +1746,7 @@
 		if (nd.root.mnt)
 			path_put(&nd.root);
 		if (!IS_ERR(filp)) {
-			error = ima_path_check(&filp->f_path, filp->f_mode &
-				       (MAY_READ | MAY_WRITE | MAY_EXEC));
+			error = ima_file_check(filp, acc_mode);
 			if (error) {
 				fput(filp);
 				filp = ERR_PTR(error);
@@ -1792,8 +1806,7 @@
 	}
 	filp = nameidata_to_filp(&nd);
 	if (!IS_ERR(filp)) {
-		error = ima_path_check(&filp->f_path, filp->f_mode &
-			       (MAY_READ | MAY_WRITE | MAY_EXEC));
+		error = ima_file_check(filp, acc_mode);
 		if (error) {
 			fput(filp);
 			filp = ERR_PTR(error);
@@ -1853,17 +1866,7 @@
 	error = security_inode_follow_link(path.dentry, &nd);
 	if (error)
 		goto exit_dput;
-	save = nd.path;
-	path_get(&save);
 	error = __do_follow_link(&path, &nd);
-	if (error == -ESTALE) {
-		/* nd.path had been dropped */
-		nd.path = save;
-		path_get(&nd.path);
-		nd.flags |= LOOKUP_REVAL;
-		error = __do_follow_link(&path, &nd);
-	}
-	path_put(&save);
 	path_put(&path);
 	if (error) {
 		/* Does someone understand code flow here? Or it is only
@@ -1873,6 +1876,10 @@
 		release_open_intent(&nd);
 		if (nd.root.mnt)
 			path_put(&nd.root);
+		if (error == -ESTALE && !force_reval) {
+			force_reval = 1;
+			goto reval;
+		}
 		return ERR_PTR(error);
 	}
 	nd.flags &= ~LOOKUP_PARENT;
diff --git a/fs/namespace.c b/fs/namespace.c
index 7d70d63..c768f73 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -965,10 +965,12 @@
 int may_umount(struct vfsmount *mnt)
 {
 	int ret = 1;
+	down_read(&namespace_sem);
 	spin_lock(&vfsmount_lock);
 	if (propagate_mount_busy(mnt, 2))
 		ret = 0;
 	spin_unlock(&vfsmount_lock);
+	up_read(&namespace_sem);
 	return ret;
 }
 
@@ -1352,12 +1354,12 @@
 	if (err)
 		goto out_cleanup_ids;
 
+	spin_lock(&vfsmount_lock);
+
 	if (IS_MNT_SHARED(dest_mnt)) {
 		for (p = source_mnt; p; p = next_mnt(p, source_mnt))
 			set_mnt_shared(p);
 	}
-
-	spin_lock(&vfsmount_lock);
 	if (parent_path) {
 		detach_mnt(source_mnt, parent_path);
 		attach_mnt(source_mnt, path);
@@ -1534,8 +1536,12 @@
 		err = change_mount_flags(path->mnt, flags);
 	else
 		err = do_remount_sb(sb, flags, data, 0);
-	if (!err)
+	if (!err) {
+		spin_lock(&vfsmount_lock);
+		mnt_flags |= path->mnt->mnt_flags & MNT_PNODE_MASK;
 		path->mnt->mnt_flags = mnt_flags;
+		spin_unlock(&vfsmount_lock);
+	}
 	up_write(&sb->s_umount);
 	if (!err) {
 		security_sb_post_remount(path->mnt, flags, data);
@@ -1665,6 +1671,8 @@
 {
 	int err;
 
+	mnt_flags &= ~(MNT_SHARED | MNT_WRITE_HOLD);
+
 	down_write(&namespace_sem);
 	/* Something was mounted here while we slept */
 	while (d_mountpoint(path->dentry) &&
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index e1d415e..0d28982 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -342,6 +342,7 @@
 		data->res.fattr = &data->fattr;
 		data->res.eof = 0;
 		data->res.count = bytes;
+		nfs_fattr_init(&data->fattr);
 		msg.rpc_argp = &data->args;
 		msg.rpc_resp = &data->res;
 
@@ -575,6 +576,7 @@
 	data->res.count = 0;
 	data->res.fattr = &data->fattr;
 	data->res.verf = &data->verf;
+	nfs_fattr_init(&data->fattr);
 
 	NFS_PROTO(data->inode)->commit_setup(data, &msg);
 
@@ -766,6 +768,7 @@
 		data->res.fattr = &data->fattr;
 		data->res.count = bytes;
 		data->res.verf = &data->verf;
+		nfs_fattr_init(&data->fattr);
 
 		task_setup_data.task = &data->task;
 		task_setup_data.callback_data = data;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 6b89132..63f2071 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -486,6 +486,8 @@
 {
 	dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page);
 
+	if (gfp & __GFP_WAIT)
+		nfs_wb_page(page->mapping->host, page);
 	/* If PagePrivate() is set, then the page is not freeable */
 	if (PagePrivate(page))
 		return 0;
diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index fa58800..237874f 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -354,12 +354,11 @@
  */
 int nfs_fscache_release_page(struct page *page, gfp_t gfp)
 {
-	struct nfs_inode *nfsi = NFS_I(page->mapping->host);
-	struct fscache_cookie *cookie = nfsi->fscache;
-
-	BUG_ON(!cookie);
-
 	if (PageFsCache(page)) {
+		struct nfs_inode *nfsi = NFS_I(page->mapping->host);
+		struct fscache_cookie *cookie = nfsi->fscache;
+
+		BUG_ON(!cookie);
 		dfprintk(FSCACHE, "NFS: fscache releasepage (0x%p/0x%p/0x%p)\n",
 			 cookie, page, nfsi);
 
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index faa0918..f141bde 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1261,8 +1261,10 @@
 
 	if (fattr->valid & NFS_ATTR_FATTR_MODE) {
 		if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)) {
+			umode_t newmode = inode->i_mode & S_IFMT;
+			newmode |= fattr->mode & S_IALLUGO;
+			inode->i_mode = newmode;
 			invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
-			inode->i_mode = fattr->mode;
 		}
 	} else if (server->caps & NFS_CAP_MODE)
 		invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index 0adefc4..59047f8 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -120,7 +120,7 @@
 	{ .status = MNT3ERR_INVAL,		.errno = -EINVAL,	},
 	{ .status = MNT3ERR_NAMETOOLONG,	.errno = -ENAMETOOLONG,	},
 	{ .status = MNT3ERR_NOTSUPP,		.errno = -ENOTSUPP,	},
-	{ .status = MNT3ERR_SERVERFAULT,	.errno = -ESERVERFAULT,	},
+	{ .status = MNT3ERR_SERVERFAULT,	.errno = -EREMOTEIO,	},
 };
 
 struct mountres {
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index 5e078b2..7bc2da8 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -699,7 +699,7 @@
 	{ NFSERR_BAD_COOKIE,	-EBADCOOKIE	},
 	{ NFSERR_NOTSUPP,	-ENOTSUPP	},
 	{ NFSERR_TOOSMALL,	-ETOOSMALL	},
-	{ NFSERR_SERVERFAULT,	-ESERVERFAULT	},
+	{ NFSERR_SERVERFAULT,	-EREMOTEIO	},
 	{ NFSERR_BADTYPE,	-EBADTYPE	},
 	{ NFSERR_JUKEBOX,	-EJUKEBOX	},
 	{ -1,			-EIO		}
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 865265b..0c6fda3 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -146,6 +146,7 @@
 	NFS_O_RDWR_STATE,		/* OPEN stateid has read/write state */
 	NFS_STATE_RECLAIM_REBOOT,	/* OPEN stateid server rebooted */
 	NFS_STATE_RECLAIM_NOGRACE,	/* OPEN stateid needs to recover state */
+	NFS_STATE_POSIX_LOCKS,		/* Posix locks are supported */
 };
 
 struct nfs4_state {
@@ -277,6 +278,7 @@
 extern void nfs4_schedule_state_recovery(struct nfs_client *);
 extern void nfs4_schedule_state_manager(struct nfs_client *);
 extern int nfs4_state_mark_reclaim_nograce(struct nfs_client *clp, struct nfs4_state *state);
+extern int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state);
 extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags);
 extern void nfs4_put_lock_state(struct nfs4_lock_state *lsp);
 extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 198d51d..375f0fa 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -249,19 +249,15 @@
 			if (state == NULL)
 				break;
 			nfs4_state_mark_reclaim_nograce(clp, state);
-		case -NFS4ERR_STALE_CLIENTID:
+			goto do_state_recovery;
 		case -NFS4ERR_STALE_STATEID:
-		case -NFS4ERR_EXPIRED:
-			nfs4_schedule_state_recovery(clp);
-			ret = nfs4_wait_clnt_recover(clp);
-			if (ret == 0)
-				exception->retry = 1;
-#if !defined(CONFIG_NFS_V4_1)
-			break;
-#else /* !defined(CONFIG_NFS_V4_1) */
-			if (!nfs4_has_session(server->nfs_client))
+			if (state == NULL)
 				break;
-			/* FALLTHROUGH */
+			nfs4_state_mark_reclaim_reboot(clp, state);
+		case -NFS4ERR_STALE_CLIENTID:
+		case -NFS4ERR_EXPIRED:
+			goto do_state_recovery;
+#if defined(CONFIG_NFS_V4_1)
 		case -NFS4ERR_BADSESSION:
 		case -NFS4ERR_BADSLOT:
 		case -NFS4ERR_BAD_HIGH_SLOT:
@@ -274,7 +270,7 @@
 			nfs4_schedule_state_recovery(clp);
 			exception->retry = 1;
 			break;
-#endif /* !defined(CONFIG_NFS_V4_1) */
+#endif /* defined(CONFIG_NFS_V4_1) */
 		case -NFS4ERR_FILE_OPEN:
 			if (exception->timeout > HZ) {
 				/* We have retried a decent amount, time to
@@ -293,6 +289,12 @@
 	}
 	/* We failed to handle the error */
 	return nfs4_map_errors(ret);
+do_state_recovery:
+	nfs4_schedule_state_recovery(clp);
+	ret = nfs4_wait_clnt_recover(clp);
+	if (ret == 0)
+		exception->retry = 1;
+	return ret;
 }
 
 
@@ -1658,6 +1660,8 @@
 	status = PTR_ERR(state);
 	if (IS_ERR(state))
 		goto err_opendata_put;
+	if ((opendata->o_res.rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) != 0)
+		set_bit(NFS_STATE_POSIX_LOCKS, &state->flags);
 	nfs4_opendata_put(opendata);
 	nfs4_put_state_owner(sp);
 	*res = state;
@@ -3422,15 +3426,14 @@
 			if (state == NULL)
 				break;
 			nfs4_state_mark_reclaim_nograce(clp, state);
-		case -NFS4ERR_STALE_CLIENTID:
+			goto do_state_recovery;
 		case -NFS4ERR_STALE_STATEID:
+			if (state == NULL)
+				break;
+			nfs4_state_mark_reclaim_reboot(clp, state);
+		case -NFS4ERR_STALE_CLIENTID:
 		case -NFS4ERR_EXPIRED:
-			rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL);
-			nfs4_schedule_state_recovery(clp);
-			if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0)
-				rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
-			task->tk_status = 0;
-			return -EAGAIN;
+			goto do_state_recovery;
 #if defined(CONFIG_NFS_V4_1)
 		case -NFS4ERR_BADSESSION:
 		case -NFS4ERR_BADSLOT:
@@ -3458,6 +3461,13 @@
 	}
 	task->tk_status = nfs4_map_errors(task->tk_status);
 	return 0;
+do_state_recovery:
+	rpc_sleep_on(&clp->cl_rpcwaitq, task, NULL);
+	nfs4_schedule_state_recovery(clp);
+	if (test_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) == 0)
+		rpc_wake_up_queued_task(&clp->cl_rpcwaitq, task);
+	task->tk_status = 0;
+	return -EAGAIN;
 }
 
 static int
@@ -4088,6 +4098,28 @@
 	.rpc_release = nfs4_lock_release,
 };
 
+static void nfs4_handle_setlk_error(struct nfs_server *server, struct nfs4_lock_state *lsp, int new_lock_owner, int error)
+{
+	struct nfs_client *clp = server->nfs_client;
+	struct nfs4_state *state = lsp->ls_state;
+
+	switch (error) {
+	case -NFS4ERR_ADMIN_REVOKED:
+	case -NFS4ERR_BAD_STATEID:
+	case -NFS4ERR_EXPIRED:
+		if (new_lock_owner != 0 ||
+		   (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0)
+			nfs4_state_mark_reclaim_nograce(clp, state);
+		lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED;
+		break;
+	case -NFS4ERR_STALE_STATEID:
+		if (new_lock_owner != 0 ||
+		    (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0)
+			nfs4_state_mark_reclaim_reboot(clp, state);
+		lsp->ls_seqid.flags &= ~NFS_SEQID_CONFIRMED;
+	};
+}
+
 static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *fl, int recovery_type)
 {
 	struct nfs4_lockdata *data;
@@ -4126,6 +4158,9 @@
 	ret = nfs4_wait_for_completion_rpc_task(task);
 	if (ret == 0) {
 		ret = data->rpc_status;
+		if (ret)
+			nfs4_handle_setlk_error(data->server, data->lsp,
+					data->arg.new_lock_owner, ret);
 	} else
 		data->cancelled = 1;
 	rpc_put_task(task);
@@ -4181,8 +4216,11 @@
 {
 	struct nfs_inode *nfsi = NFS_I(state->inode);
 	unsigned char fl_flags = request->fl_flags;
-	int status;
+	int status = -ENOLCK;
 
+	if ((fl_flags & FL_POSIX) &&
+			!test_bit(NFS_STATE_POSIX_LOCKS, &state->flags))
+		goto out;
 	/* Is this a delegated open? */
 	status = nfs4_set_lock_state(state, request);
 	if (status != 0)
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 6d263ed..c1e2733 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -901,7 +901,7 @@
 	nfs4_schedule_state_manager(clp);
 }
 
-static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state)
+int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state)
 {
 
 	set_bit(NFS_STATE_RECLAIM_REBOOT, &state->flags);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index e437fd6..5cd5184 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -4631,7 +4631,7 @@
 	 * If the server returns different values for sessionID, slotID or
 	 * sequence number, the server is looney tunes.
 	 */
-	status = -ESERVERFAULT;
+	status = -EREMOTEIO;
 
 	if (memcmp(id.data, res->sr_session->sess_id.data,
 		   NFS4_MAX_SESSIONID_LEN)) {
@@ -5774,7 +5774,7 @@
 	{ NFS4ERR_BAD_COOKIE,	-EBADCOOKIE	},
 	{ NFS4ERR_NOTSUPP,	-ENOTSUPP	},
 	{ NFS4ERR_TOOSMALL,	-ETOOSMALL	},
-	{ NFS4ERR_SERVERFAULT,	-ESERVERFAULT	},
+	{ NFS4ERR_SERVERFAULT,	-EREMOTEIO	},
 	{ NFS4ERR_BADTYPE,	-EBADTYPE	},
 	{ NFS4ERR_LOCKED,	-EAGAIN		},
 	{ NFS4ERR_SYMLINK,	-ELOOP		},
@@ -5801,7 +5801,7 @@
 	}
 	if (stat <= 10000 || stat > 10100) {
 		/* The server is looney tunes. */
-		return -ESERVERFAULT;
+		return -EREMOTEIO;
 	}
 	/* If we cannot translate the error, the recovery routines should
 	 * handle it.
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index e297593..a12c45b 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -176,6 +176,12 @@
 	kref_put(&req->wb_kref, nfs_free_request);
 }
 
+static int nfs_wait_bit_uninterruptible(void *word)
+{
+	io_schedule();
+	return 0;
+}
+
 /**
  * nfs_wait_on_request - Wait for a request to complete.
  * @req: request to wait upon.
@@ -186,14 +192,9 @@
 int
 nfs_wait_on_request(struct nfs_page *req)
 {
-	int ret = 0;
-
-	if (!test_bit(PG_BUSY, &req->wb_flags))
-		goto out;
-	ret = out_of_line_wait_on_bit(&req->wb_flags, PG_BUSY,
-			nfs_wait_bit_killable, TASK_KILLABLE);
-out:
-	return ret;
+	return wait_on_bit(&req->wb_flags, PG_BUSY,
+			nfs_wait_bit_uninterruptible,
+			TASK_UNINTERRUPTIBLE);
 }
 
 /**
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index ce907ef..f1afee4 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -243,6 +243,7 @@
 static int nfs_get_sb(struct file_system_type *, int, const char *, void *, struct vfsmount *);
 static int nfs_xdev_get_sb(struct file_system_type *fs_type,
 		int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt);
+static void nfs_put_super(struct super_block *);
 static void nfs_kill_super(struct super_block *);
 static int nfs_remount(struct super_block *sb, int *flags, char *raw_data);
 
@@ -266,6 +267,7 @@
 	.alloc_inode	= nfs_alloc_inode,
 	.destroy_inode	= nfs_destroy_inode,
 	.write_inode	= nfs_write_inode,
+	.put_super	= nfs_put_super,
 	.statfs		= nfs_statfs,
 	.clear_inode	= nfs_clear_inode,
 	.umount_begin	= nfs_umount_begin,
@@ -335,6 +337,7 @@
 	.alloc_inode	= nfs_alloc_inode,
 	.destroy_inode	= nfs_destroy_inode,
 	.write_inode	= nfs_write_inode,
+	.put_super	= nfs_put_super,
 	.statfs		= nfs_statfs,
 	.clear_inode	= nfs4_clear_inode,
 	.umount_begin	= nfs_umount_begin,
@@ -2258,6 +2261,17 @@
 }
 
 /*
+ * Ensure that we unregister the bdi before kill_anon_super
+ * releases the device name
+ */
+static void nfs_put_super(struct super_block *s)
+{
+	struct nfs_server *server = NFS_SB(s);
+
+	bdi_unregister(&server->backing_dev_info);
+}
+
+/*
  * Destroy an NFS2/3 superblock
  */
 static void nfs_kill_super(struct super_block *s)
@@ -2265,7 +2279,6 @@
 	struct nfs_server *server = NFS_SB(s);
 
 	kill_anon_super(s);
-	bdi_unregister(&server->backing_dev_info);
 	nfs_fscache_release_super_cookie(s);
 	nfs_free_server(server);
 }
diff --git a/fs/nfs/sysctl.c b/fs/nfs/sysctl.c
index 70e1fbb..ad4d2e7 100644
--- a/fs/nfs/sysctl.c
+++ b/fs/nfs/sysctl.c
@@ -15,8 +15,10 @@
 
 #include "callback.h"
 
+#ifdef CONFIG_NFS_V4
 static const int nfs_set_port_min = 0;
 static const int nfs_set_port_max = 65535;
+#endif
 static struct ctl_table_header *nfs_callback_sysctl_table;
 
 static ctl_table nfs_cb_sysctls[] = {
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index d171696..d63d964 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1233,7 +1233,7 @@
 
 
 #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
-void nfs_commitdata_release(void *data)
+static void nfs_commitdata_release(void *data)
 {
 	struct nfs_write_data *wdata = data;
 
@@ -1541,6 +1541,7 @@
 			break;
 		}
 		ret = nfs_wait_on_request(req);
+		nfs_release_request(req);
 		if (ret < 0)
 			goto out;
 	}
@@ -1597,8 +1598,7 @@
 	struct nfs_page *req;
 	int ret;
 
-	if (PageFsCache(page))
-		nfs_fscache_release_page(page, GFP_KERNEL);
+	nfs_fscache_release_page(page, GFP_KERNEL);
 
 	req = nfs_find_and_lock_request(page);
 	ret = PTR_ERR(req);
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index c487810..a0c4016 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -1316,19 +1316,11 @@
 
 static struct svc_export *find_fsidzero_export(struct svc_rqst *rqstp)
 {
-	struct svc_export *exp;
 	u32 fsidv[2];
 
 	mk_fsid(FSID_NUM, fsidv, 0, 0, 0, NULL);
 
-	exp = rqst_exp_find(rqstp, FSID_NUM, fsidv);
-	/*
-	 * We shouldn't have accepting an nfsv4 request at all if we
-	 * don't have a pseudoexport!:
-	 */
-	if (IS_ERR(exp) && PTR_ERR(exp) == -ENOENT)
-		exp = ERR_PTR(-ESERVERFAULT);
-	return exp;
+	return rqst_exp_find(rqstp, FSID_NUM, fsidv);
 }
 
 /*
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index c194793..8715d19 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -752,6 +752,8 @@
 			    flags, current_cred());
 	if (IS_ERR(*filp))
 		host_err = PTR_ERR(*filp);
+	else
+		host_err = ima_file_check(*filp, access);
 out_nfserr:
 	err = nfserrno(host_err);
 out:
@@ -2127,7 +2129,6 @@
 	 */
 	path.mnt = exp->ex_path.mnt;
 	path.dentry = dentry;
-	err = ima_path_check(&path, acc & (MAY_READ | MAY_WRITE | MAY_EXEC));
 nfsd_out:
 	return err? nfserrno(err) : 0;
 }
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 17584c5..105b508 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2829,7 +2829,7 @@
 		|| sci->sc_seq_request != sci->sc_seq_done);
 	spin_unlock(&sci->sc_state_lock);
 
-	if (flag || nilfs_segctor_confirm(sci))
+	if (flag || !nilfs_segctor_confirm(sci))
 		nilfs_segctor_write_out(sci);
 
 	WARN_ON(!list_empty(&sci->sc_copied_buffers));
diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c
index c9ee67b..1afb0a1 100644
--- a/fs/notify/inotify/inotify_fsnotify.c
+++ b/fs/notify/inotify/inotify_fsnotify.c
@@ -121,7 +121,7 @@
 	if (warned)
 		return 0;
 
-	warned = false;
+	warned = true;
 	entry = p;
 	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
 
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 8271cf0..a94e8bd 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -552,7 +552,7 @@
 
 	spin_lock(&group->inotify_data.idr_lock);
 	ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
-				group->inotify_data.last_wd,
+				group->inotify_data.last_wd+1,
 				&tmp_ientry->wd);
 	spin_unlock(&group->inotify_data.idr_lock);
 	if (ret) {
@@ -632,7 +632,7 @@
 
 	spin_lock_init(&group->inotify_data.idr_lock);
 	idr_init(&group->inotify_data.idr);
-	group->inotify_data.last_wd = 1;
+	group->inotify_data.last_wd = 0;
 	group->inotify_data.user = user;
 	group->inotify_data.fa = NULL;
 
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 3dae4a1..7e9df11 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -599,7 +599,7 @@
 	return ret;
 }
 
-/* 
+/*
  * ocfs2_dio_end_io is called by the dio core when a dio is finished.  We're
  * particularly interested in the aio/dio case.  Like the core uses
  * i_alloc_sem, we use the rw_lock DLM lock to protect io on one node from
@@ -670,7 +670,7 @@
 
 	ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
 					    inode->i_sb->s_bdev, iov, offset,
-					    nr_segs, 
+					    nr_segs,
 					    ocfs2_direct_IO_get_blocks,
 					    ocfs2_dio_end_io);
 
diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index d43d34a..21c808f 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -368,7 +368,7 @@
 	}
 	ocfs2_metadata_cache_io_unlock(ci);
 
-	mlog(ML_BH_IO, "block=(%llu), nr=(%d), cached=%s, flags=0x%x\n", 
+	mlog(ML_BH_IO, "block=(%llu), nr=(%d), cached=%s, flags=0x%x\n",
 	     (unsigned long long)block, nr,
 	     ((flags & OCFS2_BH_IGNORE_CACHE) || ignore_cache) ? "no" : "yes",
 	     flags);
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index eda5b8b..5c98900 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -78,7 +78,7 @@
 
 unsigned int o2hb_dead_threshold = O2HB_DEFAULT_DEAD_THRESHOLD;
 
-/* Only sets a new threshold if there are no active regions. 
+/* Only sets a new threshold if there are no active regions.
  *
  * No locking or otherwise interesting code is required for reading
  * o2hb_dead_threshold as it can't change once regions are active and
@@ -170,7 +170,7 @@
 
 	mlog(ML_ERROR, "Heartbeat write timeout to device %s after %u "
 	     "milliseconds\n", reg->hr_dev_name,
-	     jiffies_to_msecs(jiffies - reg->hr_last_timeout_start)); 
+	     jiffies_to_msecs(jiffies - reg->hr_last_timeout_start));
 	o2quo_disk_timeout();
 }
 
@@ -624,7 +624,7 @@
 	     "seq %llu last %llu changed %u equal %u\n",
 	     slot->ds_node_num, (long long)slot->ds_last_generation,
 	     le32_to_cpu(hb_block->hb_cksum),
-	     (unsigned long long)le64_to_cpu(hb_block->hb_seq), 
+	     (unsigned long long)le64_to_cpu(hb_block->hb_seq),
 	     (unsigned long long)slot->ds_last_time, slot->ds_changed_samples,
 	     slot->ds_equal_samples);
 
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 334f231..d8d0c65 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -485,7 +485,7 @@
 	}
 
 	if (was_valid && !valid) {
-		printk(KERN_INFO "o2net: no longer connected to "
+		printk(KERN_NOTICE "o2net: no longer connected to "
 		       SC_NODEF_FMT "\n", SC_NODEF_ARGS(old_sc));
 		o2net_complete_nodes_nsw(nn);
 	}
@@ -493,7 +493,7 @@
 	if (!was_valid && valid) {
 		o2quo_conn_up(o2net_num_from_nn(nn));
 		cancel_delayed_work(&nn->nn_connect_expired);
-		printk(KERN_INFO "o2net: %s " SC_NODEF_FMT "\n",
+		printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n",
 		       o2nm_this_node() > sc->sc_node->nd_num ?
 		       		"connected to" : "accepted connection from",
 		       SC_NODEF_ARGS(sc));
@@ -930,7 +930,7 @@
 			cond_resched();
 			continue;
 		}
-		mlog(ML_ERROR, "sendpage of size %zu to " SC_NODEF_FMT 
+		mlog(ML_ERROR, "sendpage of size %zu to " SC_NODEF_FMT
 		     " failed with %zd\n", size, SC_NODEF_ARGS(sc), ret);
 		o2net_ensure_shutdown(nn, sc, 0);
 		break;
@@ -1476,14 +1476,14 @@
 
 	do_gettimeofday(&now);
 
-	printk(KERN_INFO "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u "
+	printk(KERN_NOTICE "o2net: connection to " SC_NODEF_FMT " has been idle for %u.%u "
 	     "seconds, shutting it down.\n", SC_NODEF_ARGS(sc),
 		     o2net_idle_timeout() / 1000,
 		     o2net_idle_timeout() % 1000);
 	mlog(ML_NOTICE, "here are some times that might help debug the "
 	     "situation: (tmr %ld.%ld now %ld.%ld dr %ld.%ld adv "
 	     "%ld.%ld:%ld.%ld func (%08x:%u) %ld.%ld:%ld.%ld)\n",
-	     sc->sc_tv_timer.tv_sec, (long) sc->sc_tv_timer.tv_usec, 
+	     sc->sc_tv_timer.tv_sec, (long) sc->sc_tv_timer.tv_usec,
 	     now.tv_sec, (long) now.tv_usec,
 	     sc->sc_tv_data_ready.tv_sec, (long) sc->sc_tv_data_ready.tv_usec,
 	     sc->sc_tv_advance_start.tv_sec,
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 8d58cfe..96fa7eb 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -32,10 +32,10 @@
  * on their number */
 #define O2NET_QUORUM_DELAY_MS	((o2hb_dead_threshold + 2) * O2HB_REGION_TIMEOUT_MS)
 
-/* 
+/*
  * This version number represents quite a lot, unfortunately.  It not
  * only represents the raw network message protocol on the wire but also
- * locking semantics of the file system using the protocol.  It should 
+ * locking semantics of the file system using the protocol.  It should
  * be somewhere else, I'm sure, but right now it isn't.
  *
  * With version 11, we separate out the filesystem locking portion.  The
diff --git a/fs/ocfs2/dlm/dlmapi.h b/fs/ocfs2/dlm/dlmapi.h
index b5786a7..3cfa114 100644
--- a/fs/ocfs2/dlm/dlmapi.h
+++ b/fs/ocfs2/dlm/dlmapi.h
@@ -95,7 +95,7 @@
 		mlog(ML_ERROR, "dlm status = %s\n", dlm_errname((st)));	\
 } while (0)
 
-#define DLM_LKSB_UNUSED1           0x01  
+#define DLM_LKSB_UNUSED1           0x01
 #define DLM_LKSB_PUT_LVB           0x02
 #define DLM_LKSB_GET_LVB           0x04
 #define DLM_LKSB_UNUSED2           0x08
diff --git a/fs/ocfs2/dlm/dlmast.c b/fs/ocfs2/dlm/dlmast.c
index 01cf8cc..dccc439 100644
--- a/fs/ocfs2/dlm/dlmast.c
+++ b/fs/ocfs2/dlm/dlmast.c
@@ -123,7 +123,7 @@
 		dlm_lock_put(lock);
 		/* free up the reserved bast that we are cancelling.
 		 * guaranteed that this will not be the last reserved
-		 * ast because *both* an ast and a bast were reserved 
+		 * ast because *both* an ast and a bast were reserved
 		 * to get to this point.  the res->spinlock will not be
 		 * taken here */
 		dlm_lockres_release_ast(dlm, res);
diff --git a/fs/ocfs2/dlm/dlmconvert.c b/fs/ocfs2/dlm/dlmconvert.c
index ca96bce..f283bce 100644
--- a/fs/ocfs2/dlm/dlmconvert.c
+++ b/fs/ocfs2/dlm/dlmconvert.c
@@ -396,7 +396,7 @@
 			/* instead of logging the same network error over
 			 * and over, sleep here and wait for the heartbeat
 			 * to notice the node is dead.  times out after 5s. */
-			dlm_wait_for_node_death(dlm, res->owner, 
+			dlm_wait_for_node_death(dlm, res->owner,
 						DLM_NODE_DEATH_WAIT_MAX);
 			ret = DLM_RECOVERING;
 			mlog(0, "node %u died so returning DLM_RECOVERING "
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index 42b0bad..0cd24cf 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -102,7 +102,7 @@
 	assert_spin_locked(&res->spinlock);
 
 	stringify_lockname(res->lockname.name, res->lockname.len,
-			   buf, sizeof(buf) - 1);
+			   buf, sizeof(buf));
 	printk("lockres: %s, owner=%u, state=%u\n",
 	       buf, res->owner, res->state);
 	printk("  last used: %lu, refcnt: %u, on purge list: %s\n",
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 0334000..988c905 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -816,7 +816,7 @@
 	}
 
 	/* Once the dlm ctxt is marked as leaving then we don't want
-	 * to be put in someone's domain map. 
+	 * to be put in someone's domain map.
 	 * Also, explicitly disallow joining at certain troublesome
 	 * times (ie. during recovery). */
 	if (dlm && dlm->dlm_state != DLM_CTXT_LEAVING) {
diff --git a/fs/ocfs2/dlm/dlmlock.c b/fs/ocfs2/dlm/dlmlock.c
index 437698e..73333777 100644
--- a/fs/ocfs2/dlm/dlmlock.c
+++ b/fs/ocfs2/dlm/dlmlock.c
@@ -269,7 +269,7 @@
 		}
 		dlm_revert_pending_lock(res, lock);
 		dlm_lock_put(lock);
-	} else if (dlm_is_recovery_lock(res->lockname.name, 
+	} else if (dlm_is_recovery_lock(res->lockname.name,
 					res->lockname.len)) {
 		/* special case for the $RECOVERY lock.
 		 * there will never be an AST delivered to put
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 03ccf9a..a659606 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -366,7 +366,7 @@
 	struct dlm_master_list_entry *mle;
 
 	assert_spin_locked(&dlm->spinlock);
-	
+
 	list_for_each_entry(mle, &dlm->mle_hb_events, hb_events) {
 		if (node_up)
 			dlm_mle_node_up(dlm, mle, NULL, idx);
@@ -833,7 +833,7 @@
 		__dlm_insert_mle(dlm, mle);
 
 		/* still holding the dlm spinlock, check the recovery map
-		 * to see if there are any nodes that still need to be 
+		 * to see if there are any nodes that still need to be
 		 * considered.  these will not appear in the mle nodemap
 		 * but they might own this lockres.  wait on them. */
 		bit = find_next_bit(dlm->recovery_map, O2NM_MAX_NODES, 0);
@@ -883,7 +883,7 @@
 				msleep(500);
 			}
 			continue;
-		} 
+		}
 
 		dlm_kick_recovery_thread(dlm);
 		msleep(1000);
@@ -939,8 +939,8 @@
 		     res->lockname.name, blocked);
 		if (++tries > 20) {
 			mlog(ML_ERROR, "%s:%.*s: spinning on "
-			     "dlm_wait_for_lock_mastery, blocked=%d\n", 
-			     dlm->name, res->lockname.len, 
+			     "dlm_wait_for_lock_mastery, blocked=%d\n",
+			     dlm->name, res->lockname.len,
 			     res->lockname.name, blocked);
 			dlm_print_one_lock_resource(res);
 			dlm_print_one_mle(mle);
@@ -1029,7 +1029,7 @@
 		ret = dlm_restart_lock_mastery(dlm, res, mle, *blocked);
 		b = (mle->type == DLM_MLE_BLOCK);
 		if ((*blocked && !b) || (!*blocked && b)) {
-			mlog(0, "%s:%.*s: status change: old=%d new=%d\n", 
+			mlog(0, "%s:%.*s: status change: old=%d new=%d\n",
 			     dlm->name, res->lockname.len, res->lockname.name,
 			     *blocked, b);
 			*blocked = b;
@@ -1602,7 +1602,7 @@
 		}
 		mlog(0, "%u is the owner of %.*s, cleaning everyone else\n",
 			     dlm->node_num, res->lockname.len, res->lockname.name);
-		ret = dlm_dispatch_assert_master(dlm, res, 0, request->node_idx, 
+		ret = dlm_dispatch_assert_master(dlm, res, 0, request->node_idx,
 						 DLM_ASSERT_MASTER_MLE_CLEANUP);
 		if (ret < 0) {
 			mlog(ML_ERROR, "failed to dispatch assert master work\n");
@@ -1701,7 +1701,7 @@
 
 		if (r & DLM_ASSERT_RESPONSE_REASSERT) {
 			mlog(0, "%.*s: node %u create mles on other "
-			     "nodes and requests a re-assert\n", 
+			     "nodes and requests a re-assert\n",
 			     namelen, lockname, to);
 			reassert = 1;
 		}
@@ -1812,7 +1812,7 @@
 				spin_unlock(&dlm->master_lock);
 				spin_unlock(&dlm->spinlock);
 				goto done;
-			}	
+			}
 		}
 	}
 	spin_unlock(&dlm->master_lock);
@@ -1883,7 +1883,7 @@
 		int extra_ref = 0;
 		int nn = -1;
 		int rr, err = 0;
-		
+
 		spin_lock(&mle->spinlock);
 		if (mle->type == DLM_MLE_BLOCK || mle->type == DLM_MLE_MIGRATION)
 			extra_ref = 1;
@@ -1891,7 +1891,7 @@
 			/* MASTER mle: if any bits set in the response map
 			 * then the calling node needs to re-assert to clear
 			 * up nodes that this node contacted */
-			while ((nn = find_next_bit (mle->response_map, O2NM_MAX_NODES, 
+			while ((nn = find_next_bit (mle->response_map, O2NM_MAX_NODES,
 						    nn+1)) < O2NM_MAX_NODES) {
 				if (nn != dlm->node_num && nn != assert->node_idx)
 					master_request = 1;
@@ -2002,7 +2002,7 @@
 	__dlm_print_one_lock_resource(res);
 	spin_unlock(&res->spinlock);
 	spin_unlock(&dlm->spinlock);
-	*ret_data = (void *)res; 
+	*ret_data = (void *)res;
 	dlm_put(dlm);
 	return -EINVAL;
 }
@@ -2040,10 +2040,10 @@
 	item->u.am.request_from = request_from;
 	item->u.am.flags = flags;
 
-	if (ignore_higher) 
-		mlog(0, "IGNORE HIGHER: %.*s\n", res->lockname.len, 
+	if (ignore_higher)
+		mlog(0, "IGNORE HIGHER: %.*s\n", res->lockname.len,
 		     res->lockname.name);
-		
+
 	spin_lock(&dlm->work_lock);
 	list_add_tail(&item->list, &dlm->work_list);
 	spin_unlock(&dlm->work_lock);
@@ -2133,7 +2133,7 @@
  * think that $RECOVERY is currently mastered by a dead node.  If so,
  * we wait a short time to allow that node to get notified by its own
  * heartbeat stack, then check again.  All $RECOVERY lock resources
- * mastered by dead nodes are purged when the hearbeat callback is 
+ * mastered by dead nodes are purged when the hearbeat callback is
  * fired, so we can know for sure that it is safe to continue once
  * the node returns a live node or no node.  */
 static int dlm_pre_master_reco_lockres(struct dlm_ctxt *dlm,
@@ -2174,7 +2174,7 @@
 				ret = -EAGAIN;
 			}
 			spin_unlock(&dlm->spinlock);
-			mlog(0, "%s: reco lock master is %u\n", dlm->name, 
+			mlog(0, "%s: reco lock master is %u\n", dlm->name,
 			     master);
 			break;
 		}
@@ -2602,7 +2602,7 @@
 
 			mlog(0, "%s:%.*s: timed out during migration\n",
 			     dlm->name, res->lockname.len, res->lockname.name);
-			/* avoid hang during shutdown when migrating lockres 
+			/* avoid hang during shutdown when migrating lockres
 			 * to a node which also goes down */
 			if (dlm_is_node_dead(dlm, target)) {
 				mlog(0, "%s:%.*s: expected migration "
@@ -2738,7 +2738,7 @@
 	can_proceed = !!(res->state & DLM_LOCK_RES_MIGRATING);
 	spin_unlock(&res->spinlock);
 
-	/* target has died, so make the caller break out of the 
+	/* target has died, so make the caller break out of the
 	 * wait_event, but caller must recheck the domain_map */
 	spin_lock(&dlm->spinlock);
 	if (!test_bit(mig_target, dlm->domain_map))
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index 2f9e4e1..344bcf9 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -1050,7 +1050,7 @@
 				if (lock->ml.node == dead_node) {
 					mlog(0, "AHA! there was "
 					     "a $RECOVERY lock for dead "
-					     "node %u (%s)!\n", 
+					     "node %u (%s)!\n",
 					     dead_node, dlm->name);
 					list_del_init(&lock->list);
 					dlm_lock_put(lock);
@@ -1164,6 +1164,39 @@
 	mres->master = master;
 }
 
+static void dlm_prepare_lvb_for_migration(struct dlm_lock *lock,
+					  struct dlm_migratable_lockres *mres,
+					  int queue)
+{
+	if (!lock->lksb)
+	       return;
+
+	/* Ignore lvb in all locks in the blocked list */
+	if (queue == DLM_BLOCKED_LIST)
+		return;
+
+	/* Only consider lvbs in locks with granted EX or PR lock levels */
+	if (lock->ml.type != LKM_EXMODE && lock->ml.type != LKM_PRMODE)
+		return;
+
+	if (dlm_lvb_is_empty(mres->lvb)) {
+		memcpy(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN);
+		return;
+	}
+
+	/* Ensure the lvb copied for migration matches in other valid locks */
+	if (!memcmp(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN))
+		return;
+
+	mlog(ML_ERROR, "Mismatched lvb in lock cookie=%u:%llu, name=%.*s, "
+	     "node=%u\n",
+	     dlm_get_lock_cookie_node(be64_to_cpu(lock->ml.cookie)),
+	     dlm_get_lock_cookie_seq(be64_to_cpu(lock->ml.cookie)),
+	     lock->lockres->lockname.len, lock->lockres->lockname.name,
+	     lock->ml.node);
+	dlm_print_one_lock_resource(lock->lockres);
+	BUG();
+}
 
 /* returns 1 if this lock fills the network structure,
  * 0 otherwise */
@@ -1181,20 +1214,7 @@
 	ml->list = queue;
 	if (lock->lksb) {
 		ml->flags = lock->lksb->flags;
-		/* send our current lvb */
-		if (ml->type == LKM_EXMODE ||
-		    ml->type == LKM_PRMODE) {
-			/* if it is already set, this had better be a PR
-			 * and it has to match */
-			if (!dlm_lvb_is_empty(mres->lvb) &&
-			    (ml->type == LKM_EXMODE ||
-			     memcmp(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN))) {
-				mlog(ML_ERROR, "mismatched lvbs!\n");
-				dlm_print_one_lock_resource(lock->lockres);
-				BUG();
-			}
-			memcpy(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN);
-		}
+		dlm_prepare_lvb_for_migration(lock, mres, queue);
 	}
 	ml->node = lock->ml.node;
 	mres->num_locks++;
@@ -1730,6 +1750,7 @@
 	struct dlm_lock *lock = NULL;
 	u8 from = O2NM_MAX_NODES;
 	unsigned int added = 0;
+	__be64 c;
 
 	mlog(0, "running %d locks for this lockres\n", mres->num_locks);
 	for (i=0; i<mres->num_locks; i++) {
@@ -1777,19 +1798,48 @@
 			/* lock is always created locally first, and
 			 * destroyed locally last.  it must be on the list */
 			if (!lock) {
-				__be64 c = ml->cookie;
-				mlog(ML_ERROR, "could not find local lock "
-					       "with cookie %u:%llu!\n",
+				c = ml->cookie;
+				mlog(ML_ERROR, "Could not find local lock "
+					       "with cookie %u:%llu, node %u, "
+					       "list %u, flags 0x%x, type %d, "
+					       "conv %d, highest blocked %d\n",
 				     dlm_get_lock_cookie_node(be64_to_cpu(c)),
-				     dlm_get_lock_cookie_seq(be64_to_cpu(c)));
+				     dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+				     ml->node, ml->list, ml->flags, ml->type,
+				     ml->convert_type, ml->highest_blocked);
 				__dlm_print_one_lock_resource(res);
 				BUG();
 			}
-			BUG_ON(lock->ml.node != ml->node);
+
+			if (lock->ml.node != ml->node) {
+				c = lock->ml.cookie;
+				mlog(ML_ERROR, "Mismatched node# in lock "
+				     "cookie %u:%llu, name %.*s, node %u\n",
+				     dlm_get_lock_cookie_node(be64_to_cpu(c)),
+				     dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+				     res->lockname.len, res->lockname.name,
+				     lock->ml.node);
+				c = ml->cookie;
+				mlog(ML_ERROR, "Migrate lock cookie %u:%llu, "
+				     "node %u, list %u, flags 0x%x, type %d, "
+				     "conv %d, highest blocked %d\n",
+				     dlm_get_lock_cookie_node(be64_to_cpu(c)),
+				     dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+				     ml->node, ml->list, ml->flags, ml->type,
+				     ml->convert_type, ml->highest_blocked);
+				__dlm_print_one_lock_resource(res);
+				BUG();
+			}
 
 			if (tmpq != queue) {
-				mlog(0, "lock was on %u instead of %u for %.*s\n",
-				     j, ml->list, res->lockname.len, res->lockname.name);
+				c = ml->cookie;
+				mlog(0, "Lock cookie %u:%llu was on list %u "
+				     "instead of list %u for %.*s\n",
+				     dlm_get_lock_cookie_node(be64_to_cpu(c)),
+				     dlm_get_lock_cookie_seq(be64_to_cpu(c)),
+				     j, ml->list, res->lockname.len,
+				     res->lockname.name);
+				__dlm_print_one_lock_resource(res);
 				spin_unlock(&res->spinlock);
 				continue;
 			}
@@ -1839,7 +1889,7 @@
 				 * the lvb. */
 				memcpy(res->lvb, mres->lvb, DLM_LVB_LEN);
 			} else {
-				/* otherwise, the node is sending its 
+				/* otherwise, the node is sending its
 				 * most recent valid lvb info */
 				BUG_ON(ml->type != LKM_EXMODE &&
 				       ml->type != LKM_PRMODE);
@@ -1886,7 +1936,7 @@
 		spin_lock(&res->spinlock);
 		list_for_each_entry(lock, queue, list) {
 			if (lock->ml.cookie == ml->cookie) {
-				__be64 c = lock->ml.cookie;
+				c = lock->ml.cookie;
 				mlog(ML_ERROR, "%s:%.*s: %u:%llu: lock already "
 				     "exists on this lockres!\n", dlm->name,
 				     res->lockname.len, res->lockname.name,
@@ -2114,7 +2164,7 @@
 	assert_spin_locked(&res->spinlock);
 
 	if (res->owner == dlm->node_num)
-		/* if this node owned the lockres, and if the dead node 
+		/* if this node owned the lockres, and if the dead node
 		 * had an EX when he died, blank out the lvb */
 		search_node = dead_node;
 	else {
@@ -2152,7 +2202,7 @@
 
 	/* this node is the lockres master:
 	 * 1) remove any stale locks for the dead node
-	 * 2) if the dead node had an EX when he died, blank out the lvb 
+	 * 2) if the dead node had an EX when he died, blank out the lvb
 	 */
 	assert_spin_locked(&dlm->spinlock);
 	assert_spin_locked(&res->spinlock);
@@ -2193,7 +2243,12 @@
 		mlog(0, "%s:%.*s: freed %u locks for dead node %u, "
 		     "dropping ref from lockres\n", dlm->name,
 		     res->lockname.len, res->lockname.name, freed, dead_node);
-		BUG_ON(!test_bit(dead_node, res->refmap));
+		if(!test_bit(dead_node, res->refmap)) {
+			mlog(ML_ERROR, "%s:%.*s: freed %u locks for dead node %u, "
+			     "but ref was not set\n", dlm->name,
+			     res->lockname.len, res->lockname.name, freed, dead_node);
+			__dlm_print_one_lock_resource(res);
+		}
 		dlm_lockres_clear_refmap_bit(dead_node, res);
 	} else if (test_bit(dead_node, res->refmap)) {
 		mlog(0, "%s:%.*s: dead node %u had a ref, but had "
@@ -2260,7 +2315,7 @@
 				}
 				spin_unlock(&res->spinlock);
 				continue;
-			}			
+			}
 			spin_lock(&res->spinlock);
 			/* zero the lvb if necessary */
 			dlm_revalidate_lvb(dlm, res, dead_node);
@@ -2411,7 +2466,7 @@
  * this function on each node racing to become the recovery
  * master will not stop attempting this until either:
  * a) this node gets the EX (and becomes the recovery master),
- * or b) dlm->reco.new_master gets set to some nodenum 
+ * or b) dlm->reco.new_master gets set to some nodenum
  * != O2NM_INVALID_NODE_NUM (another node will do the reco).
  * so each time a recovery master is needed, the entire cluster
  * will sync at this point.  if the new master dies, that will
@@ -2424,7 +2479,7 @@
 
 	mlog(0, "starting recovery of %s at %lu, dead=%u, this=%u\n",
 	     dlm->name, jiffies, dlm->reco.dead_node, dlm->node_num);
-again:	
+again:
 	memset(&lksb, 0, sizeof(lksb));
 
 	ret = dlmlock(dlm, LKM_EXMODE, &lksb, LKM_NOQUEUE|LKM_RECOVERY,
@@ -2437,8 +2492,8 @@
 	if (ret == DLM_NORMAL) {
 		mlog(0, "dlm=%s dlmlock says I got it (this=%u)\n",
 		     dlm->name, dlm->node_num);
-		
-		/* got the EX lock.  check to see if another node 
+
+		/* got the EX lock.  check to see if another node
 		 * just became the reco master */
 		if (dlm_reco_master_ready(dlm)) {
 			mlog(0, "%s: got reco EX lock, but %u will "
@@ -2451,12 +2506,12 @@
 			/* see if recovery was already finished elsewhere */
 			spin_lock(&dlm->spinlock);
 			if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
-				status = -EINVAL;	
+				status = -EINVAL;
 				mlog(0, "%s: got reco EX lock, but "
 				     "node got recovered already\n", dlm->name);
 				if (dlm->reco.new_master != O2NM_INVALID_NODE_NUM) {
 					mlog(ML_ERROR, "%s: new master is %u "
-					     "but no dead node!\n", 
+					     "but no dead node!\n",
 					     dlm->name, dlm->reco.new_master);
 					BUG();
 				}
@@ -2468,7 +2523,7 @@
 		 * set the master and send the messages to begin recovery */
 		if (!status) {
 			mlog(0, "%s: dead=%u, this=%u, sending "
-			     "begin_reco now\n", dlm->name, 
+			     "begin_reco now\n", dlm->name,
 			     dlm->reco.dead_node, dlm->node_num);
 			status = dlm_send_begin_reco_message(dlm,
 				      dlm->reco.dead_node);
@@ -2501,7 +2556,7 @@
 		mlog(0, "dlm=%s dlmlock says another node got it (this=%u)\n",
 		     dlm->name, dlm->node_num);
 		/* another node is master. wait on
-		 * reco.new_master != O2NM_INVALID_NODE_NUM 
+		 * reco.new_master != O2NM_INVALID_NODE_NUM
 		 * for at most one second */
 		wait_event_timeout(dlm->dlm_reco_thread_wq,
 					 dlm_reco_master_ready(dlm),
@@ -2589,7 +2644,13 @@
 			     "begin reco msg (%d)\n", dlm->name, nodenum, ret);
 			ret = 0;
 		}
-		if (ret == -EAGAIN) {
+
+		/*
+		 * Prior to commit aad1b15310b9bcd59fa81ab8f2b1513b59553ea8,
+		 * dlm_begin_reco_handler() returned EAGAIN and not -EAGAIN.
+		 * We are handling both for compatibility reasons.
+		 */
+		if (ret == -EAGAIN || ret == EAGAIN) {
 			mlog(0, "%s: trying to start recovery of node "
 			     "%u, but node %u is waiting for last recovery "
 			     "to complete, backoff for a bit\n", dlm->name,
@@ -2599,7 +2660,7 @@
 		}
 		if (ret < 0) {
 			struct dlm_lock_resource *res;
-			/* this is now a serious problem, possibly ENOMEM 
+			/* this is now a serious problem, possibly ENOMEM
 			 * in the network stack.  must retry */
 			mlog_errno(ret);
 			mlog(ML_ERROR, "begin reco of dlm %s to node %u "
@@ -2612,7 +2673,7 @@
 			} else {
 				mlog(ML_ERROR, "recovery lock not found\n");
 			}
-			/* sleep for a bit in hopes that we can avoid 
+			/* sleep for a bit in hopes that we can avoid
 			 * another ENOMEM */
 			msleep(100);
 			goto retry;
@@ -2664,7 +2725,7 @@
 	}
 	if (dlm->reco.dead_node != O2NM_INVALID_NODE_NUM) {
 		mlog(ML_NOTICE, "%s: dead_node previously set to %u, "
-		     "node %u changing it to %u\n", dlm->name, 
+		     "node %u changing it to %u\n", dlm->name,
 		     dlm->reco.dead_node, br->node_idx, br->dead_node);
 	}
 	dlm_set_reco_master(dlm, br->node_idx);
@@ -2730,8 +2791,8 @@
 		if (ret < 0) {
 			mlog_errno(ret);
 			if (dlm_is_host_down(ret)) {
-				/* this has no effect on this recovery 
-				 * session, so set the status to zero to 
+				/* this has no effect on this recovery
+				 * session, so set the status to zero to
 				 * finish out the last recovery */
 				mlog(ML_ERROR, "node %u went down after this "
 				     "node finished recovery.\n", nodenum);
@@ -2768,7 +2829,7 @@
 	mlog(0, "%s: node %u finalizing recovery stage%d of "
 	     "node %u (%u:%u)\n", dlm->name, fr->node_idx, stage,
 	     fr->dead_node, dlm->reco.dead_node, dlm->reco.new_master);
- 
+
 	spin_lock(&dlm->spinlock);
 
 	if (dlm->reco.new_master != fr->node_idx) {
diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c
index 00f53b2..49e29ec 100644
--- a/fs/ocfs2/dlm/dlmunlock.c
+++ b/fs/ocfs2/dlm/dlmunlock.c
@@ -190,8 +190,8 @@
 			actions &= ~(DLM_UNLOCK_REMOVE_LOCK|
 				     DLM_UNLOCK_REGRANT_LOCK|
 				     DLM_UNLOCK_CLEAR_CONVERT_TYPE);
-		} else if (status == DLM_RECOVERING || 
-			   status == DLM_MIGRATING || 
+		} else if (status == DLM_RECOVERING ||
+			   status == DLM_MIGRATING ||
 			   status == DLM_FORWARD) {
 			/* must clear the actions because this unlock
 			 * is about to be retried.  cannot free or do
@@ -661,14 +661,14 @@
 	if (call_ast) {
 		mlog(0, "calling unlockast(%p, %d)\n", data, status);
 		if (is_master) {
-			/* it is possible that there is one last bast 
+			/* it is possible that there is one last bast
 			 * pending.  make sure it is flushed, then
 			 * call the unlockast.
 			 * not an issue if this is a mastered remotely,
 			 * since this lock has been removed from the
 			 * lockres queues and cannot be found. */
 			dlm_kick_thread(dlm, NULL);
-			wait_event(dlm->ast_wq, 
+			wait_event(dlm->ast_wq,
 				   dlm_lock_basts_flushed(dlm, lock));
 		}
 		(*unlockast)(data, status);
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index c5e4a49..e044019 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -875,6 +875,14 @@
 		lockres_or_flags(lockres, OCFS2_LOCK_NEEDS_REFRESH);
 
 	lockres->l_level = lockres->l_requested;
+
+	/*
+	 * We set the OCFS2_LOCK_UPCONVERT_FINISHING flag before clearing
+	 * the OCFS2_LOCK_BUSY flag to prevent the dc thread from
+	 * downconverting the lock before the upconvert has fully completed.
+	 */
+	lockres_or_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
+
 	lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
 
 	mlog_exit_void();
@@ -907,8 +915,6 @@
 
 	assert_spin_locked(&lockres->l_lock);
 
-	lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED);
-
 	if (level > lockres->l_blocking) {
 		/* only schedule a downconvert if we haven't already scheduled
 		 * one that goes low enough to satisfy the level we're
@@ -921,6 +927,9 @@
 		lockres->l_blocking = level;
 	}
 
+	if (needs_downconvert)
+		lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED);
+
 	mlog_exit(needs_downconvert);
 	return needs_downconvert;
 }
@@ -1133,6 +1142,7 @@
 	mlog_entry_void();
 	spin_lock_irqsave(&lockres->l_lock, flags);
 	lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
+	lockres_clear_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
 	if (convert)
 		lockres->l_action = OCFS2_AST_INVALID;
 	else
@@ -1323,13 +1333,13 @@
 again:
 	wait = 0;
 
+	spin_lock_irqsave(&lockres->l_lock, flags);
+
 	if (catch_signals && signal_pending(current)) {
 		ret = -ERESTARTSYS;
-		goto out;
+		goto unlock;
 	}
 
-	spin_lock_irqsave(&lockres->l_lock, flags);
-
 	mlog_bug_on_msg(lockres->l_flags & OCFS2_LOCK_FREEING,
 			"Cluster lock called on freeing lockres %s! flags "
 			"0x%lx\n", lockres->l_name, lockres->l_flags);
@@ -1346,6 +1356,25 @@
 		goto unlock;
 	}
 
+	if (lockres->l_flags & OCFS2_LOCK_UPCONVERT_FINISHING) {
+		/*
+		 * We've upconverted. If the lock now has a level we can
+		 * work with, we take it. If, however, the lock is not at the
+		 * required level, we go thru the full cycle. One way this could
+		 * happen is if a process requesting an upconvert to PR is
+		 * closely followed by another requesting upconvert to an EX.
+		 * If the process requesting EX lands here, we want it to
+		 * continue attempting to upconvert and let the process
+		 * requesting PR take the lock.
+		 * If multiple processes request upconvert to PR, the first one
+		 * here will take the lock. The others will have to go thru the
+		 * OCFS2_LOCK_BLOCKED check to ensure that there is no pending
+		 * downconvert request.
+		 */
+		if (level <= lockres->l_level)
+			goto update_holders;
+	}
+
 	if (lockres->l_flags & OCFS2_LOCK_BLOCKED &&
 	    !ocfs2_may_continue_on_blocked_lock(lockres, level)) {
 		/* is the lock is currently blocked on behalf of
@@ -1416,11 +1445,14 @@
 		goto again;
 	}
 
+update_holders:
 	/* Ok, if we get here then we're good to go. */
 	ocfs2_inc_holders(lockres, level);
 
 	ret = 0;
 unlock:
+	lockres_clear_flags(lockres, OCFS2_LOCK_UPCONVERT_FINISHING);
+
 	spin_unlock_irqrestore(&lockres->l_lock, flags);
 out:
 	/*
@@ -3155,7 +3187,7 @@
 /* Mark the lockres as being dropped. It will no longer be
  * queued if blocking, but we still may have to wait on it
  * being dequeued from the downconvert thread before we can consider
- * it safe to drop. 
+ * it safe to drop.
  *
  * You can *not* attempt to call cluster_lock on this lockres anymore. */
 void ocfs2_mark_lockres_freeing(struct ocfs2_lock_res *lockres)
@@ -3352,6 +3384,7 @@
 	unsigned long flags;
 	int blocking;
 	int new_level;
+	int level;
 	int ret = 0;
 	int set_lvb = 0;
 	unsigned int gen;
@@ -3360,9 +3393,17 @@
 
 	spin_lock_irqsave(&lockres->l_lock, flags);
 
-	BUG_ON(!(lockres->l_flags & OCFS2_LOCK_BLOCKED));
-
 recheck:
+	/*
+	 * Is it still blocking? If not, we have no more work to do.
+	 */
+	if (!(lockres->l_flags & OCFS2_LOCK_BLOCKED)) {
+		BUG_ON(lockres->l_blocking != DLM_LOCK_NL);
+		spin_unlock_irqrestore(&lockres->l_lock, flags);
+		ret = 0;
+		goto leave;
+	}
+
 	if (lockres->l_flags & OCFS2_LOCK_BUSY) {
 		/* XXX
 		 * This is a *big* race.  The OCFS2_LOCK_PENDING flag
@@ -3401,6 +3442,31 @@
 		goto leave;
 	}
 
+	/*
+	 * This prevents livelocks. OCFS2_LOCK_UPCONVERT_FINISHING flag is
+	 * set when the ast is received for an upconvert just before the
+	 * OCFS2_LOCK_BUSY flag is cleared. Now if the fs received a bast
+	 * on the heels of the ast, we want to delay the downconvert just
+	 * enough to allow the up requestor to do its task. Because this
+	 * lock is in the blocked queue, the lock will be downconverted
+	 * as soon as the requestor is done with the lock.
+	 */
+	if (lockres->l_flags & OCFS2_LOCK_UPCONVERT_FINISHING)
+		goto leave_requeue;
+
+	/*
+	 * How can we block and yet be at NL?  We were trying to upconvert
+	 * from NL and got canceled.  The code comes back here, and now
+	 * we notice and clear BLOCKING.
+	 */
+	if (lockres->l_level == DLM_LOCK_NL) {
+		BUG_ON(lockres->l_ex_holders || lockres->l_ro_holders);
+		lockres->l_blocking = DLM_LOCK_NL;
+		lockres_clear_flags(lockres, OCFS2_LOCK_BLOCKED);
+		spin_unlock_irqrestore(&lockres->l_lock, flags);
+		goto leave;
+	}
+
 	/* if we're blocking an exclusive and we have *any* holders,
 	 * then requeue. */
 	if ((lockres->l_blocking == DLM_LOCK_EX)
@@ -3438,6 +3504,7 @@
 	 * may sleep, so we save off a copy of what we're blocking as
 	 * it may change while we're not holding the spin lock. */
 	blocking = lockres->l_blocking;
+	level = lockres->l_level;
 	spin_unlock_irqrestore(&lockres->l_lock, flags);
 
 	ctl->unblock_action = lockres->l_ops->downconvert_worker(lockres, blocking);
@@ -3446,7 +3513,7 @@
 		goto leave;
 
 	spin_lock_irqsave(&lockres->l_lock, flags);
-	if (blocking != lockres->l_blocking) {
+	if ((blocking != lockres->l_blocking) || (level != lockres->l_level)) {
 		/* If this changed underneath us, then we can't drop
 		 * it just yet. */
 		goto recheck;
diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
index 15713cb..19ad145 100644
--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -239,7 +239,7 @@
 		mlog(0, "Encoding parent: blkno: %llu, generation: %u\n",
 		     (unsigned long long)blkno, generation);
 	}
-	
+
 	*max_len = len;
 
 bail:
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index d35a27f..5328529 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -192,7 +192,7 @@
 		emi->ei_clusters += ins->ei_clusters;
 		return 1;
 	} else if ((ins->ei_phys + ins->ei_clusters) == emi->ei_phys &&
-		   (ins->ei_cpos + ins->ei_clusters) == emi->ei_phys &&
+		   (ins->ei_cpos + ins->ei_clusters) == emi->ei_cpos &&
 		   ins->ei_flags == emi->ei_flags) {
 		emi->ei_phys = ins->ei_phys;
 		emi->ei_cpos = ins->ei_cpos;
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 06ccf6a..558ce03 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -749,7 +749,7 @@
 	int ret;
 
 	offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
-	/* ugh.  in prepare/commit_write, if from==to==start of block, we 
+	/* ugh.  in prepare/commit_write, if from==to==start of block, we
 	** skip the prepare.  make sure we never send an offset for the start
 	** of a block
 	*/
@@ -1779,7 +1779,7 @@
 	struct inode *inode = dentry->d_inode;
 	loff_t saved_pos, end;
 
-	/* 
+	/*
 	 * We start with a read level meta lock and only jump to an ex
 	 * if we need to make modifications here.
 	 */
@@ -2013,8 +2013,8 @@
 	/* buffered aio wouldn't have proper lock coverage today */
 	BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
 
-	if ((file->f_flags & O_DSYNC && !direct_io) || IS_SYNC(inode) ||
-	    (file->f_flags & O_DIRECT && has_refcount)) {
+	if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
+	    ((file->f_flags & O_DIRECT) && has_refcount)) {
 		ret = filemap_fdatawrite_range(file->f_mapping, pos,
 					       pos + count - 1);
 		if (ret < 0)
@@ -2033,7 +2033,7 @@
 						      pos + count - 1);
 	}
 
-	/* 
+	/*
 	 * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
 	 * function pointer which is called when o_direct io completes so that
 	 * it can unlock our rw lock.  (it's the clustered equivalent of
@@ -2198,7 +2198,7 @@
 		goto bail;
 	}
 
-	/* 
+	/*
 	 * buffered reads protect themselves in ->readpage().  O_DIRECT reads
 	 * need locks to protect pending reads from racing with truncate.
 	 */
@@ -2220,10 +2220,10 @@
 	 * We're fine letting folks race truncates and extending
 	 * writes with read across the cluster, just like they can
 	 * locally. Hence no rw_lock during read.
-	 * 
+	 *
 	 * Take and drop the meta data lock to update inode fields
 	 * like i_size. This allows the checks down below
-	 * generic_file_aio_read() a chance of actually working. 
+	 * generic_file_aio_read() a chance of actually working.
 	 */
 	ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level);
 	if (ret < 0) {
@@ -2248,7 +2248,7 @@
 bail:
 	if (have_alloc_sem)
 		up_read(&inode->i_alloc_sem);
-	if (rw_level != -1) 
+	if (rw_level != -1)
 		ocfs2_rw_unlock(inode, rw_level);
 	mlog_exit(ret);
 
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 0297fb8..88459bd 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -475,7 +475,7 @@
 	if (args->fi_flags & OCFS2_FI_FLAG_ORPHAN_RECOVERY) {
 		status = ocfs2_try_open_lock(inode, 0);
 		if (status) {
-			make_bad_inode(inode);	
+			make_bad_inode(inode);
 			return status;
 		}
 	}
@@ -684,7 +684,7 @@
 	return status;
 }
 
-/* 
+/*
  * Serialize with orphan dir recovery. If the process doing
  * recovery on this orphan dir does an iget() with the dir
  * i_mutex held, we'll deadlock here. Instead we detect this
diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c
index 31fbb06..7d9d9c1 100644
--- a/fs/ocfs2/ioctl.c
+++ b/fs/ocfs2/ioctl.c
@@ -7,6 +7,7 @@
 
 #include <linux/fs.h>
 #include <linux/mount.h>
+#include <linux/compat.h>
 
 #define MLOG_MASK_PREFIX ML_INODE
 #include <cluster/masklog.h>
@@ -181,6 +182,10 @@
 #ifdef CONFIG_COMPAT
 long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 {
+	bool preserve;
+	struct reflink_arguments args;
+	struct inode *inode = file->f_path.dentry->d_inode;
+
 	switch (cmd) {
 	case OCFS2_IOC32_GETFLAGS:
 		cmd = OCFS2_IOC_GETFLAGS;
@@ -195,8 +200,15 @@
 	case OCFS2_IOC_GROUP_EXTEND:
 	case OCFS2_IOC_GROUP_ADD:
 	case OCFS2_IOC_GROUP_ADD64:
-	case OCFS2_IOC_REFLINK:
 		break;
+	case OCFS2_IOC_REFLINK:
+		if (copy_from_user(&args, (struct reflink_arguments *)arg,
+				   sizeof(args)))
+			return -EFAULT;
+		preserve = (args.preserve != 0);
+
+		return ocfs2_reflink_ioctl(inode, compat_ptr(args.old_path),
+					   compat_ptr(args.new_path), preserve);
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index bf34c49..9336c60 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -2034,7 +2034,7 @@
 		status = -ENOENT;
 		mlog_errno(status);
 		return status;
-	}	
+	}
 
 	mutex_lock(&orphan_dir_inode->i_mutex);
 	status = ocfs2_inode_lock(orphan_dir_inode, NULL, 0);
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 9362eea..740f448 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -136,6 +136,10 @@
 #define OCFS2_LOCK_PENDING       (0x00000400) /* This lockres is pending a
 						 call to dlm_lock.  Only
 						 exists with BUSY set. */
+#define OCFS2_LOCK_UPCONVERT_FINISHING (0x00000800) /* blocks the dc thread
+						     * from downconverting
+						     * before the upconvert
+						     * has completed */
 
 struct ocfs2_lock_res_ops;
 
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 1a1a679..7638a38 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -1417,9 +1417,16 @@
 	return blocksize - offsetof(struct ocfs2_dinode, id2.i_symlink);
 }
 
-static inline int ocfs2_max_inline_data(int blocksize)
+static inline int ocfs2_max_inline_data_with_xattr(int blocksize,
+						   struct ocfs2_dinode *di)
 {
-	return blocksize - offsetof(struct ocfs2_dinode, id2.i_data.id_data);
+	if (di && (di->i_dyn_features & OCFS2_INLINE_XATTR_FL))
+		return blocksize -
+			offsetof(struct ocfs2_dinode, id2.i_data.id_data) -
+			di->i_xattr_inline_size;
+	else
+		return blocksize -
+			offsetof(struct ocfs2_dinode, id2.i_data.id_data);
 }
 
 static inline int ocfs2_extent_recs_per_inode(int blocksize)
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 74db2be..8ae65c9 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2945,7 +2945,7 @@
 
 	while (offset < end) {
 		page_index = offset >> PAGE_CACHE_SHIFT;
-		map_end = (page_index + 1) << PAGE_CACHE_SHIFT;
+		map_end = ((loff_t)page_index + 1) << PAGE_CACHE_SHIFT;
 		if (map_end > end)
 			map_end = end;
 
@@ -2957,8 +2957,12 @@
 
 		page = grab_cache_page(mapping, page_index);
 
-		/* This page can't be dirtied before we CoW it out. */
-		BUG_ON(PageDirty(page));
+		/*
+		 * In case PAGE_CACHE_SIZE <= CLUSTER_SIZE, This page
+		 * can't be dirtied before we CoW it out.
+		 */
+		if (PAGE_CACHE_SIZE <= OCFS2_SB(sb)->s_clustersize)
+			BUG_ON(PageDirty(page));
 
 		if (!PageUptodate(page)) {
 			ret = block_read_full_page(page, ocfs2_get_block);
@@ -3170,7 +3174,7 @@
 
 	while (offset < end) {
 		page_index = offset >> PAGE_CACHE_SHIFT;
-		map_end = (page_index + 1) << PAGE_CACHE_SHIFT;
+		map_end = ((loff_t)page_index + 1) << PAGE_CACHE_SHIFT;
 		if (map_end > end)
 			map_end = end;
 
diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c
index e49c410..3038c92 100644
--- a/fs/ocfs2/stack_o2cb.c
+++ b/fs/ocfs2/stack_o2cb.c
@@ -277,7 +277,7 @@
 	u32 dlm_key;
 	struct dlm_ctxt *dlm;
 	struct o2dlm_private *priv;
-	struct dlm_protocol_version dlm_version;
+	struct dlm_protocol_version fs_version;
 
 	BUG_ON(conn == NULL);
 	BUG_ON(o2cb_stack.sp_proto == NULL);
@@ -304,18 +304,18 @@
 	/* used by the dlm code to make message headers unique, each
 	 * node in this domain must agree on this. */
 	dlm_key = crc32_le(0, conn->cc_name, conn->cc_namelen);
-	dlm_version.pv_major = conn->cc_version.pv_major;
-	dlm_version.pv_minor = conn->cc_version.pv_minor;
+	fs_version.pv_major = conn->cc_version.pv_major;
+	fs_version.pv_minor = conn->cc_version.pv_minor;
 
-	dlm = dlm_register_domain(conn->cc_name, dlm_key, &dlm_version);
+	dlm = dlm_register_domain(conn->cc_name, dlm_key, &fs_version);
 	if (IS_ERR(dlm)) {
 		rc = PTR_ERR(dlm);
 		mlog_errno(rc);
 		goto out_free;
 	}
 
-	conn->cc_version.pv_major = dlm_version.pv_major;
-	conn->cc_version.pv_minor = dlm_version.pv_minor;
+	conn->cc_version.pv_major = fs_version.pv_major;
+	conn->cc_version.pv_minor = fs_version.pv_minor;
 	conn->cc_lockspace = dlm;
 
 	dlm_register_eviction_cb(dlm, &priv->op_eviction_cb);
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 2606991..755cd49 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1062,7 +1062,7 @@
 				     "file system, but write access is "
 				     "unavailable.\n");
 			else
-				mlog_errno(status);			
+				mlog_errno(status);
 			goto read_super_error;
 		}
 
diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index 49b133c..32499d21 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -137,20 +137,20 @@
 	}
 
 	memcpy(link, target, len);
-	nd_set_link(nd, link);
 
 bail:
+	nd_set_link(nd, status ? ERR_PTR(status) : link);
 	brelse(bh);
 
 	mlog_exit(status);
-	return status ? ERR_PTR(status) : link;
+	return NULL;
 }
 
 static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
 {
-	char *link = cookie;
-
-	kfree(link);
+	char *link = nd_get_link(nd);
+	if (!IS_ERR(link))
+		kfree(link);
 }
 
 const struct inode_operations ocfs2_symlink_inode_operations = {
diff --git a/fs/ocfs2/uptodate.c b/fs/ocfs2/uptodate.c
index c613693..a0a120e 100644
--- a/fs/ocfs2/uptodate.c
+++ b/fs/ocfs2/uptodate.c
@@ -267,8 +267,8 @@
 }
 
 /* Warning: even if it returns true, this does *not* guarantee that
- * the block is stored in our inode metadata cache. 
- * 
+ * the block is stored in our inode metadata cache.
+ *
  * This can be called under lock_buffer()
  */
 int ocfs2_buffer_uptodate(struct ocfs2_caching_info *ci,
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 18d5cc6..58324c2 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1419,7 +1419,6 @@
 		goto out;
 
 	error = PROC_I(inode)->op.proc_get_link(inode, &nd->path);
-	nd->last_type = LAST_BIND;
 out:
 	return ERR_PTR(error);
 }
@@ -2370,16 +2369,30 @@
 {
 	struct pid_namespace *ns = dentry->d_sb->s_fs_info;
 	pid_t tgid = task_tgid_nr_ns(current, ns);
-	char tmp[PROC_NUMBUF];
-	if (!tgid)
-		return ERR_PTR(-ENOENT);
-	sprintf(tmp, "%d", task_tgid_nr_ns(current, ns));
-	return ERR_PTR(vfs_follow_link(nd,tmp));
+	char *name = ERR_PTR(-ENOENT);
+	if (tgid) {
+		name = __getname();
+		if (!name)
+			name = ERR_PTR(-ENOMEM);
+		else
+			sprintf(name, "%d", tgid);
+	}
+	nd_set_link(nd, name);
+	return NULL;
+}
+
+static void proc_self_put_link(struct dentry *dentry, struct nameidata *nd,
+				void *cookie)
+{
+	char *s = nd_get_link(nd);
+	if (!IS_ERR(s))
+		__putname(s);
 }
 
 static const struct inode_operations proc_self_inode_operations = {
 	.readlink	= proc_self_readlink,
 	.follow_link	= proc_self_follow_link,
+	.put_link	= proc_self_put_link,
 };
 
 /*
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index 2efc571..1739a4a 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -123,30 +123,6 @@
 
 /*****************************************************************************/
 /*
- * check that file shrinkage doesn't leave any VMAs dangling in midair
- */
-static int ramfs_nommu_check_mappings(struct inode *inode,
-				      size_t newsize, size_t size)
-{
-	struct vm_area_struct *vma;
-	struct prio_tree_iter iter;
-
-	/* search for VMAs that fall within the dead zone */
-	vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
-			      newsize >> PAGE_SHIFT,
-			      (size + PAGE_SIZE - 1) >> PAGE_SHIFT
-			      ) {
-		/* found one - only interested if it's shared out of the page
-		 * cache */
-		if (vma->vm_flags & VM_SHARED)
-			return -ETXTBSY; /* not quite true, but near enough */
-	}
-
-	return 0;
-}
-
-/*****************************************************************************/
-/*
  *
  */
 static int ramfs_nommu_resize(struct inode *inode, loff_t newsize, loff_t size)
@@ -164,7 +140,7 @@
 
 	/* check that a decrease in size doesn't cut off any shared mappings */
 	if (newsize < size) {
-		ret = ramfs_nommu_check_mappings(inode, newsize, size);
+		ret = nommu_shrink_inode_mappings(inode, size, newsize);
 		if (ret < 0)
 			return ret;
 	}
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 9087b10..2df0f5c 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1497,9 +1497,11 @@
 
 	args.objectid = key->on_disk_key.k_objectid;
 	args.dirid = key->on_disk_key.k_dir_id;
+	reiserfs_write_unlock(s);
 	inode = iget5_locked(s, key->on_disk_key.k_objectid,
 			     reiserfs_find_actor, reiserfs_init_locked_inode,
 			     (void *)(&args));
+	reiserfs_write_lock(s);
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 83ac4d3..ba98546 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -2913,7 +2913,9 @@
 	journal->j_mount_id = 10;
 	journal->j_state = 0;
 	atomic_set(&(journal->j_jlock), 0);
+	reiserfs_write_unlock(sb);
 	journal->j_cnode_free_list = allocate_cnodes(num_cnodes);
+	reiserfs_write_lock(sb);
 	journal->j_cnode_free_orig = journal->j_cnode_free_list;
 	journal->j_cnode_free = journal->j_cnode_free_list ? num_cnodes : 0;
 	journal->j_cnode_used = 0;
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index c117fa8..42d2135 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -544,6 +544,7 @@
 error_rsb_inval:
 	ret = -EINVAL;
 error_rsb:
+	kfree(rsb);
 	return ret;
 }
 
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 220b758..6a06a1d 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -81,24 +81,23 @@
 		if (!sd_attrs)
 			return -ENOMEM;
 		sd->s_iattr = sd_attrs;
-	} else {
-		/* attributes were changed at least once in past */
-		iattrs = &sd_attrs->ia_iattr;
+	}
+	/* attributes were changed at least once in past */
+	iattrs = &sd_attrs->ia_iattr;
 
-		if (ia_valid & ATTR_UID)
-			iattrs->ia_uid = iattr->ia_uid;
-		if (ia_valid & ATTR_GID)
-			iattrs->ia_gid = iattr->ia_gid;
-		if (ia_valid & ATTR_ATIME)
-			iattrs->ia_atime = iattr->ia_atime;
-		if (ia_valid & ATTR_MTIME)
-			iattrs->ia_mtime = iattr->ia_mtime;
-		if (ia_valid & ATTR_CTIME)
-			iattrs->ia_ctime = iattr->ia_ctime;
-		if (ia_valid & ATTR_MODE) {
-			umode_t mode = iattr->ia_mode;
-			iattrs->ia_mode = sd->s_mode = mode;
-		}
+	if (ia_valid & ATTR_UID)
+		iattrs->ia_uid = iattr->ia_uid;
+	if (ia_valid & ATTR_GID)
+		iattrs->ia_gid = iattr->ia_gid;
+	if (ia_valid & ATTR_ATIME)
+		iattrs->ia_atime = iattr->ia_atime;
+	if (ia_valid & ATTR_MTIME)
+		iattrs->ia_mtime = iattr->ia_mtime;
+	if (ia_valid & ATTR_CTIME)
+		iattrs->ia_ctime = iattr->ia_ctime;
+	if (ia_valid & ATTR_MODE) {
+		umode_t mode = iattr->ia_mode;
+		iattrs->ia_mode = sd->s_mode = mode;
 	}
 	return 0;
 }
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 09783cc..77414db 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -954,16 +954,14 @@
 	ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_IRECLAIM));
 
 	/*
-	 * If we have nothing to flush with this inode then complete the
-	 * teardown now, otherwise delay the flush operation.
+	 * We always use background reclaim here because even if the
+	 * inode is clean, it still may be under IO and hence we have
+	 * to take the flush lock. The background reclaim path handles
+	 * this more efficiently than we can here, so simply let background
+	 * reclaim tear down all inodes.
 	 */
-	if (!xfs_inode_clean(ip)) {
-		xfs_inode_set_reclaim_tag(ip);
-		return;
-	}
-
 out_reclaim:
-	xfs_ireclaim(ip);
+	xfs_inode_set_reclaim_tag(ip);
 }
 
 /*
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 6fed97a..1f5e4bb 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -65,7 +65,6 @@
 	 * as the tree is sparse and a gang lookup walks to find
 	 * the number of objects requested.
 	 */
-	read_lock(&pag->pag_ici_lock);
 	if (tag == XFS_ICI_NO_TAG) {
 		nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
 				(void **)&ip, *first_index, 1);
@@ -74,7 +73,7 @@
 				(void **)&ip, *first_index, 1, tag);
 	}
 	if (!nr_found)
-		goto unlock;
+		return NULL;
 
 	/*
 	 * Update the index for the next lookup. Catch overflows
@@ -84,13 +83,8 @@
 	 */
 	*first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
 	if (*first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
-		goto unlock;
-
+		return NULL;
 	return ip;
-
-unlock:
-	read_unlock(&pag->pag_ici_lock);
-	return NULL;
 }
 
 STATIC int
@@ -100,7 +94,8 @@
 	int			(*execute)(struct xfs_inode *ip,
 					   struct xfs_perag *pag, int flags),
 	int			flags,
-	int			tag)
+	int			tag,
+	int			exclusive)
 {
 	struct xfs_perag	*pag = &mp->m_perag[ag];
 	uint32_t		first_index;
@@ -114,10 +109,20 @@
 		int		error = 0;
 		xfs_inode_t	*ip;
 
+		if (exclusive)
+			write_lock(&pag->pag_ici_lock);
+		else
+			read_lock(&pag->pag_ici_lock);
 		ip = xfs_inode_ag_lookup(mp, pag, &first_index, tag);
-		if (!ip)
+		if (!ip) {
+			if (exclusive)
+				write_unlock(&pag->pag_ici_lock);
+			else
+				read_unlock(&pag->pag_ici_lock);
 			break;
+		}
 
+		/* execute releases pag->pag_ici_lock */
 		error = execute(ip, pag, flags);
 		if (error == EAGAIN) {
 			skipped++;
@@ -125,9 +130,8 @@
 		}
 		if (error)
 			last_error = error;
-		/*
-		 * bail out if the filesystem is corrupted.
-		 */
+
+		/* bail out if the filesystem is corrupted.  */
 		if (error == EFSCORRUPTED)
 			break;
 
@@ -148,7 +152,8 @@
 	int			(*execute)(struct xfs_inode *ip,
 					   struct xfs_perag *pag, int flags),
 	int			flags,
-	int			tag)
+	int			tag,
+	int			exclusive)
 {
 	int			error = 0;
 	int			last_error = 0;
@@ -157,7 +162,8 @@
 	for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
 		if (!mp->m_perag[ag].pag_ici_init)
 			continue;
-		error = xfs_inode_ag_walk(mp, ag, execute, flags, tag);
+		error = xfs_inode_ag_walk(mp, ag, execute, flags, tag,
+						exclusive);
 		if (error) {
 			last_error = error;
 			if (error == EFSCORRUPTED)
@@ -174,30 +180,31 @@
 	struct xfs_perag	*pag)
 {
 	struct inode		*inode = VFS_I(ip);
+	int			error = EFSCORRUPTED;
 
 	/* nothing to sync during shutdown */
-	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-		read_unlock(&pag->pag_ici_lock);
-		return EFSCORRUPTED;
-	}
+	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+		goto out_unlock;
 
-	/*
-	 * If we can't get a reference on the inode, it must be in reclaim.
-	 * Leave it for the reclaim code to flush. Also avoid inodes that
-	 * haven't been fully initialised.
-	 */
-	if (!igrab(inode)) {
-		read_unlock(&pag->pag_ici_lock);
-		return ENOENT;
-	}
-	read_unlock(&pag->pag_ici_lock);
+	/* avoid new or reclaimable inodes. Leave for reclaim code to flush */
+	error = ENOENT;
+	if (xfs_iflags_test(ip, XFS_INEW | XFS_IRECLAIMABLE | XFS_IRECLAIM))
+		goto out_unlock;
 
-	if (is_bad_inode(inode) || xfs_iflags_test(ip, XFS_INEW)) {
+	/* If we can't grab the inode, it must on it's way to reclaim. */
+	if (!igrab(inode))
+		goto out_unlock;
+
+	if (is_bad_inode(inode)) {
 		IRELE(ip);
-		return ENOENT;
+		goto out_unlock;
 	}
 
-	return 0;
+	/* inode is valid */
+	error = 0;
+out_unlock:
+	read_unlock(&pag->pag_ici_lock);
+	return error;
 }
 
 STATIC int
@@ -282,7 +289,7 @@
 	ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
 
 	error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
-				      XFS_ICI_NO_TAG);
+				      XFS_ICI_NO_TAG, 0);
 	if (error)
 		return XFS_ERROR(error);
 
@@ -304,7 +311,7 @@
 	ASSERT((flags & ~SYNC_WAIT) == 0);
 
 	return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
-				     XFS_ICI_NO_TAG);
+				     XFS_ICI_NO_TAG, 0);
 }
 
 STATIC int
@@ -664,60 +671,6 @@
 	kthread_stop(mp->m_sync_task);
 }
 
-STATIC int
-xfs_reclaim_inode(
-	xfs_inode_t	*ip,
-	int		sync_mode)
-{
-	xfs_perag_t	*pag = xfs_get_perag(ip->i_mount, ip->i_ino);
-
-	/* The hash lock here protects a thread in xfs_iget_core from
-	 * racing with us on linking the inode back with a vnode.
-	 * Once we have the XFS_IRECLAIM flag set it will not touch
-	 * us.
-	 */
-	write_lock(&pag->pag_ici_lock);
-	spin_lock(&ip->i_flags_lock);
-	if (__xfs_iflags_test(ip, XFS_IRECLAIM) ||
-	    !__xfs_iflags_test(ip, XFS_IRECLAIMABLE)) {
-		spin_unlock(&ip->i_flags_lock);
-		write_unlock(&pag->pag_ici_lock);
-		return -EAGAIN;
-	}
-	__xfs_iflags_set(ip, XFS_IRECLAIM);
-	spin_unlock(&ip->i_flags_lock);
-	write_unlock(&pag->pag_ici_lock);
-	xfs_put_perag(ip->i_mount, pag);
-
-	/*
-	 * If the inode is still dirty, then flush it out.  If the inode
-	 * is not in the AIL, then it will be OK to flush it delwri as
-	 * long as xfs_iflush() does not keep any references to the inode.
-	 * We leave that decision up to xfs_iflush() since it has the
-	 * knowledge of whether it's OK to simply do a delwri flush of
-	 * the inode or whether we need to wait until the inode is
-	 * pulled from the AIL.
-	 * We get the flush lock regardless, though, just to make sure
-	 * we don't free it while it is being flushed.
-	 */
-	xfs_ilock(ip, XFS_ILOCK_EXCL);
-	xfs_iflock(ip);
-
-	/*
-	 * In the case of a forced shutdown we rely on xfs_iflush() to
-	 * wait for the inode to be unpinned before returning an error.
-	 */
-	if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
-		/* synchronize with xfs_iflush_done */
-		xfs_iflock(ip);
-		xfs_ifunlock(ip);
-	}
-
-	xfs_iunlock(ip, XFS_ILOCK_EXCL);
-	xfs_ireclaim(ip);
-	return 0;
-}
-
 void
 __xfs_inode_set_reclaim_tag(
 	struct xfs_perag	*pag,
@@ -760,19 +713,55 @@
 }
 
 STATIC int
-xfs_reclaim_inode_now(
+xfs_reclaim_inode(
 	struct xfs_inode	*ip,
 	struct xfs_perag	*pag,
-	int			flags)
+	int			sync_mode)
 {
-	/* ignore if already under reclaim */
-	if (xfs_iflags_test(ip, XFS_IRECLAIM)) {
-		read_unlock(&pag->pag_ici_lock);
+	/*
+	 * The radix tree lock here protects a thread in xfs_iget from racing
+	 * with us starting reclaim on the inode.  Once we have the
+	 * XFS_IRECLAIM flag set it will not touch us.
+	 */
+	spin_lock(&ip->i_flags_lock);
+	ASSERT_ALWAYS(__xfs_iflags_test(ip, XFS_IRECLAIMABLE));
+	if (__xfs_iflags_test(ip, XFS_IRECLAIM)) {
+		/* ignore as it is already under reclaim */
+		spin_unlock(&ip->i_flags_lock);
+		write_unlock(&pag->pag_ici_lock);
 		return 0;
 	}
-	read_unlock(&pag->pag_ici_lock);
+	__xfs_iflags_set(ip, XFS_IRECLAIM);
+	spin_unlock(&ip->i_flags_lock);
+	write_unlock(&pag->pag_ici_lock);
 
-	return xfs_reclaim_inode(ip, flags);
+	/*
+	 * If the inode is still dirty, then flush it out.  If the inode
+	 * is not in the AIL, then it will be OK to flush it delwri as
+	 * long as xfs_iflush() does not keep any references to the inode.
+	 * We leave that decision up to xfs_iflush() since it has the
+	 * knowledge of whether it's OK to simply do a delwri flush of
+	 * the inode or whether we need to wait until the inode is
+	 * pulled from the AIL.
+	 * We get the flush lock regardless, though, just to make sure
+	 * we don't free it while it is being flushed.
+	 */
+	xfs_ilock(ip, XFS_ILOCK_EXCL);
+	xfs_iflock(ip);
+
+	/*
+	 * In the case of a forced shutdown we rely on xfs_iflush() to
+	 * wait for the inode to be unpinned before returning an error.
+	 */
+	if (!is_bad_inode(VFS_I(ip)) && xfs_iflush(ip, sync_mode) == 0) {
+		/* synchronize with xfs_iflush_done */
+		xfs_iflock(ip);
+		xfs_ifunlock(ip);
+	}
+
+	xfs_iunlock(ip, XFS_ILOCK_EXCL);
+	xfs_ireclaim(ip);
+	return 0;
 }
 
 int
@@ -780,6 +769,6 @@
 	xfs_mount_t	*mp,
 	int		mode)
 {
-	return xfs_inode_ag_iterator(mp, xfs_reclaim_inode_now, mode,
-					XFS_ICI_RECLAIM_TAG);
+	return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode,
+					XFS_ICI_RECLAIM_TAG, 1);
 }
diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h
index a500b4d..ea932b4 100644
--- a/fs/xfs/linux-2.6/xfs_sync.h
+++ b/fs/xfs/linux-2.6/xfs_sync.h
@@ -54,6 +54,6 @@
 int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
 int xfs_inode_ag_iterator(struct xfs_mount *mp,
 	int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
-	int flags, int tag);
+	int flags, int tag, int write_lock);
 
 #endif
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 71af76f..873e07e 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -891,7 +891,7 @@
 	uint		 flags)
 {
 	ASSERT(mp->m_quotainfo);
-	xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG);
+	xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0);
 }
 
 /*------------------------------------------------------------------------*/
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index d1483a4..84ca1cf 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -114,10 +114,82 @@
 	return error;
 }
 
+/*
+ * We need to check that the format of the data fork in the temporary inode is
+ * valid for the target inode before doing the swap. This is not a problem with
+ * attr1 because of the fixed fork offset, but attr2 has a dynamically sized
+ * data fork depending on the space the attribute fork is taking so we can get
+ * invalid formats on the target inode.
+ *
+ * E.g. target has space for 7 extents in extent format, temp inode only has
+ * space for 6.  If we defragment down to 7 extents, then the tmp format is a
+ * btree, but when swapped it needs to be in extent format. Hence we can't just
+ * blindly swap data forks on attr2 filesystems.
+ *
+ * Note that we check the swap in both directions so that we don't end up with
+ * a corrupt temporary inode, either.
+ *
+ * Note that fixing the way xfs_fsr sets up the attribute fork in the source
+ * inode will prevent this situation from occurring, so all we do here is
+ * reject and log the attempt. basically we are putting the responsibility on
+ * userspace to get this right.
+ */
+static int
+xfs_swap_extents_check_format(
+	xfs_inode_t	*ip,	/* target inode */
+	xfs_inode_t	*tip)	/* tmp inode */
+{
+
+	/* Should never get a local format */
+	if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
+	    tip->i_d.di_format == XFS_DINODE_FMT_LOCAL)
+		return EINVAL;
+
+	/*
+	 * if the target inode has less extents that then temporary inode then
+	 * why did userspace call us?
+	 */
+	if (ip->i_d.di_nextents < tip->i_d.di_nextents)
+		return EINVAL;
+
+	/*
+	 * if the target inode is in extent form and the temp inode is in btree
+	 * form then we will end up with the target inode in the wrong format
+	 * as we already know there are less extents in the temp inode.
+	 */
+	if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+	    tip->i_d.di_format == XFS_DINODE_FMT_BTREE)
+		return EINVAL;
+
+	/* Check temp in extent form to max in target */
+	if (tip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+	    XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) > ip->i_df.if_ext_max)
+		return EINVAL;
+
+	/* Check target in extent form to max in temp */
+	if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
+	    XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max)
+		return EINVAL;
+
+	/* Check root block of temp in btree form to max in target */
+	if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+	    XFS_IFORK_BOFF(ip) &&
+	    tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip))
+		return EINVAL;
+
+	/* Check root block of target in btree form to max in temp */
+	if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
+	    XFS_IFORK_BOFF(tip) &&
+	    ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip))
+		return EINVAL;
+
+	return 0;
+}
+
 int
 xfs_swap_extents(
-	xfs_inode_t	*ip,
-	xfs_inode_t	*tip,
+	xfs_inode_t	*ip,	/* target inode */
+	xfs_inode_t	*tip,	/* tmp inode */
 	xfs_swapext_t	*sxp)
 {
 	xfs_mount_t	*mp;
@@ -161,13 +233,6 @@
 		goto out_unlock;
 	}
 
-	/* Should never get a local format */
-	if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
-	    tip->i_d.di_format == XFS_DINODE_FMT_LOCAL) {
-		error = XFS_ERROR(EINVAL);
-		goto out_unlock;
-	}
-
 	if (VN_CACHED(VFS_I(tip)) != 0) {
 		error = xfs_flushinval_pages(tip, 0, -1,
 				FI_REMAPF_LOCKED);
@@ -189,13 +254,12 @@
 		goto out_unlock;
 	}
 
-	/*
-	 * If the target has extended attributes, the tmp file
-	 * must also in order to ensure the correct data fork
-	 * format.
-	 */
-	if ( XFS_IFORK_Q(ip) != XFS_IFORK_Q(tip) ) {
-		error = XFS_ERROR(EINVAL);
+	/* check inode formats now that data is flushed */
+	error = xfs_swap_extents_check_format(ip, tip);
+	if (error) {
+		xfs_fs_cmn_err(CE_NOTE, mp,
+		    "%s: inode 0x%llx format is incompatible for exchanging.",
+				__FILE__, ip->i_ino);
 		goto out_unlock;
 	}
 
@@ -276,6 +340,16 @@
 	*tifp = *tempifp;	/* struct copy */
 
 	/*
+	 * Fix the in-memory data fork values that are dependent on the fork
+	 * offset in the inode. We can't assume they remain the same as attr2
+	 * has dynamic fork offsets.
+	 */
+	ifp->if_ext_max = XFS_IFORK_SIZE(ip, XFS_DATA_FORK) /
+					(uint)sizeof(xfs_bmbt_rec_t);
+	tifp->if_ext_max = XFS_IFORK_SIZE(tip, XFS_DATA_FORK) /
+					(uint)sizeof(xfs_bmbt_rec_t);
+
+	/*
 	 * Fix the on-disk inode values
 	 */
 	tmp = (__uint64_t)ip->i_d.di_nblocks;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index fa402a6..155e798 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -73,7 +73,6 @@
 	ASSERT(atomic_read(&ip->i_pincount) == 0);
 	ASSERT(!spin_is_locked(&ip->i_flags_lock));
 	ASSERT(completion_done(&ip->i_flush));
-	ASSERT(!rwsem_is_locked(&ip->i_iolock.mr_lock));
 
 	mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino);
 
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 391d36b..ef77fd8 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2842,13 +2842,9 @@
 
 	/*
 	 * If the inode isn't dirty, then just release the inode flush lock and
-	 * do nothing. Treat stale inodes the same; we cannot rely on the
-	 * backing buffer remaining stale in cache for the remaining life of
-	 * the stale inode and so xfs_itobp() below may give us a buffer that
-	 * no longer contains inodes below. Doing this stale check here also
-	 * avoids forcing the log on pinned, stale inodes.
+	 * do nothing.
 	 */
-	if (xfs_inode_clean(ip) || xfs_iflags_test(ip, XFS_ISTALE)) {
+	if (xfs_inode_clean(ip)) {
 		xfs_ifunlock(ip);
 		return 0;
 	}
@@ -2872,6 +2868,19 @@
 	xfs_iunpin_wait(ip);
 
 	/*
+	 * For stale inodes we cannot rely on the backing buffer remaining
+	 * stale in cache for the remaining life of the stale inode and so
+	 * xfs_itobp() below may give us a buffer that no longer contains
+	 * inodes below. We have to check this after ensuring the inode is
+	 * unpinned so that it is safe to reclaim the stale inode after the
+	 * flush call.
+	 */
+	if (xfs_iflags_test(ip, XFS_ISTALE)) {
+		xfs_ifunlock(ip);
+		return 0;
+	}
+
+	/*
 	 * This may have been unpinned because the filesystem is shutting
 	 * down forcibly. If that's the case we must not write this inode
 	 * to disk, because the log record didn't make it to disk!
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 9e15a11..6be05f7 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -1517,6 +1517,8 @@
 	 */
 	error = xfs_rtfind_forw(mp, tp, end, mp->m_sb.sb_rextents - 1,
 		&postblock);
+	if (error)
+		return error;
 	/*
 	 * If there are blocks not being freed at the front of the
 	 * old extent, add summary data for them to be allocated.
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 9d7febd..0946997 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -152,7 +152,7 @@
 #include <linux/hardirq.h>
 #define ACPI_PREEMPTION_POINT() \
 	do { \
-		if (!in_atomic_preempt_off()) \
+		if (!in_atomic_preempt_off() && !irqs_disabled()) \
 			cond_resched(); \
 	} while (0)
 
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index bc4fdf2..c5ba163 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -85,7 +85,7 @@
 	__u16 hdisplay, hsync_start, hsync_end, htotal, hskew;
 	__u16 vdisplay, vsync_start, vsync_end, vtotal, vscan;
 
-	__u32 vrefresh; /* vertical refresh * 1000 */
+	__u32 vrefresh;
 
 	__u32 flags;
 	__u32 type;
diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h
index 1e67c44..f745948 100644
--- a/include/drm/nouveau_drm.h
+++ b/include/drm/nouveau_drm.h
@@ -77,6 +77,7 @@
 #define NOUVEAU_GETPARAM_PCI_PHYSICAL    10
 #define NOUVEAU_GETPARAM_CHIPSET_ID      11
 #define NOUVEAU_GETPARAM_VM_VRAM_BASE    12
+#define NOUVEAU_GETPARAM_GRAPH_UNITS     13
 struct drm_nouveau_getparam {
 	uint64_t param;
 	uint64_t value;
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index ff7664e..4c4e0f8 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -353,6 +353,11 @@
 	/* notify the driver we are taking a fault on this BO
 	 * and have reserved it */
 	void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
+
+	/**
+	 * notify the driver that we're about to swap out this bo
+	 */
+	void (*swap_notify) (struct ttm_buffer_object *bo);
 };
 
 /**
diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h
index 2be7e12..c7645f4 100644
--- a/include/drm/vmwgfx_drm.h
+++ b/include/drm/vmwgfx_drm.h
@@ -68,7 +68,8 @@
 #define DRM_VMW_PARAM_NUM_FREE_STREAMS 1
 #define DRM_VMW_PARAM_3D               2
 #define DRM_VMW_PARAM_FIFO_OFFSET      3
-
+#define DRM_VMW_PARAM_HW_CAPS          4
+#define DRM_VMW_PARAM_FIFO_CAPS        5
 
 /**
  * struct drm_vmw_getparam_arg
@@ -181,6 +182,8 @@
  * The size of the array should equal the total number of mipmap levels.
  * @shareable: Boolean whether other clients (as identified by file descriptors)
  * may reference this surface.
+ * @scanout: Boolean whether the surface is intended to be used as a
+ * scanout.
  *
  * Input data to the DRM_VMW_CREATE_SURFACE Ioctl.
  * Output data from the DRM_VMW_REF_SURFACE Ioctl.
@@ -192,7 +195,7 @@
 	uint32_t mip_levels[DRM_VMW_MAX_SURFACE_FACES];
 	uint64_t size_addr;
 	int32_t shareable;
-	uint32_t pad64;
+	int32_t scanout;
 };
 
 /**
@@ -295,17 +298,28 @@
  *
  * @commands: User-space address of a command buffer cast to an uint64_t.
  * @command-size: Size in bytes of the command buffer.
+ * @throttle-us: Sleep until software is less than @throttle_us
+ * microseconds ahead of hardware. The driver may round this value
+ * to the nearest kernel tick.
  * @fence_rep: User-space address of a struct drm_vmw_fence_rep cast to an
  * uint64_t.
+ * @version: Allows expanding the execbuf ioctl parameters without breaking
+ * backwards compatibility, since user-space will always tell the kernel
+ * which version it uses.
+ * @flags: Execbuf flags. None currently.
  *
  * Argument to the DRM_VMW_EXECBUF Ioctl.
  */
 
+#define DRM_VMW_EXECBUF_VERSION 0
+
 struct drm_vmw_execbuf_arg {
 	uint64_t commands;
 	uint32_t command_size;
-	uint32_t pad64;
+	uint32_t throttle_us;
 	uint64_t fence_rep;
+	 uint32_t version;
+	 uint32_t flags;
 };
 
 /**
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 3692425..b926afe 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -80,7 +80,7 @@
 void __acpi_unmap_table(char *map, unsigned long size);
 int early_acpi_boot_init(void);
 int acpi_boot_init (void);
-int acpi_boot_table_init (void);
+void acpi_boot_table_init (void);
 int acpi_mps_check (void);
 int acpi_numa_init (void);
 
@@ -321,9 +321,9 @@
 	return 0;
 }
 
-static inline int acpi_boot_table_init(void)
+static inline void acpi_boot_table_init(void)
 {
-	return 0;
+	return;
 }
 
 static inline int acpi_mps_check(void)
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index ab94335..6816be6 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -1,5 +1,9 @@
 /*
- *  linux/include/asm-arm/hardware/amba.h
+ *  linux/include/amba/bus.h
+ *
+ *  This device type deals with ARM PrimeCells and anything else that
+ *  presents a proper CID (0xB105F00D) at the end of the I/O register
+ *  region or that is derived from a PrimeCell.
  *
  *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
  *
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 38a6948..20f3156 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -647,9 +647,9 @@
 	return id[ATA_ID_SECTOR_SIZE] & (1 << 13);
 }
 
-static inline u8 ata_id_logical_per_physical_sectors(const u16 *id)
+static inline u16 ata_id_logical_per_physical_sectors(const u16 *id)
 {
-	return id[ATA_ID_SECTOR_SIZE] & 0xf;
+	return 1 << (id[ATA_ID_SECTOR_SIZE] & 0xf);
 }
 
 static inline int ata_id_has_lba48(const u16 *id)
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index cd4349b..89c6249 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -109,6 +109,7 @@
 extern int __must_check remove_arg_zero(struct linux_binprm *);
 extern int search_binary_handler(struct linux_binprm *,struct pt_regs *);
 extern int flush_old_exec(struct linux_binprm * bprm);
+extern void setup_new_exec(struct linux_binprm * bprm);
 
 extern int suid_dumpable;
 #define SUID_DUMP_DISABLE	0	/* No setuid dumping */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 9b98173..1896e86 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -461,8 +461,7 @@
 #define QUEUE_FLAG_NONROT      14	/* non-rotational device (SSD) */
 #define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
 #define QUEUE_FLAG_IO_STAT     15	/* do IO stats */
-#define QUEUE_FLAG_CQ	       16	/* hardware does queuing */
-#define QUEUE_FLAG_DISCARD     17	/* supports DISCARD */
+#define QUEUE_FLAG_DISCARD     16	/* supports DISCARD */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
 				 (1 << QUEUE_FLAG_CLUSTER) |		\
@@ -586,7 +585,6 @@
 
 #define blk_queue_plugged(q)	test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
 #define blk_queue_tagged(q)	test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
-#define blk_queue_queuing(q)	test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags)
 #define blk_queue_stopped(q)	test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
 #define blk_queue_nomerges(q)	test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
 #define blk_queue_nonrot(q)	test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
@@ -938,6 +936,8 @@
 extern void blk_set_default_limits(struct queue_limits *lim);
 extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 			    sector_t offset);
+extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
+			    sector_t offset);
 extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 			      sector_t offset);
 extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
@@ -1148,8 +1148,11 @@
 static inline int queue_sector_discard_alignment(struct request_queue *q,
 						 sector_t sector)
 {
-	return ((sector << 9) - q->limits.discard_alignment)
-		& (q->limits.discard_granularity - 1);
+	struct queue_limits *lim = &q->limits;
+	unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
+
+	return (lim->discard_granularity + lim->discard_alignment - alignment)
+		& (lim->discard_granularity - 1);
 }
 
 static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 5be3dab..188fcae 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -15,6 +15,7 @@
 # define __acquire(x)	__context__(x,1)
 # define __release(x)	__context__(x,-1)
 # define __cond_lock(x,c)	((c) ? ({ __acquire(x); 1; }) : 0)
+# define __percpu	__attribute__((noderef, address_space(3)))
 extern void __chk_user_ptr(const volatile void __user *);
 extern void __chk_io_ptr(const volatile void __iomem *);
 #else
@@ -32,6 +33,7 @@
 # define __acquire(x) (void)0
 # define __release(x) (void)0
 # define __cond_lock(x,c) (c)
+# define __percpu
 #endif
 
 #ifdef __KERNEL__
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 72ba63e..3a779ff 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -24,9 +24,6 @@
 
 #include <linux/types.h>
 
-#define CN_IDX_CONNECTOR		0xffffffff
-#define CN_VAL_CONNECTOR		0xffffffff
-
 /*
  * Process Events connector unique ids -- used for message routing
  */
@@ -75,30 +72,6 @@
 	__u8 data[0];
 };
 
-/*
- * Notify structure - requests notification about
- * registering/unregistering idx/val in range [first, first+range].
- */
-struct cn_notify_req {
-	__u32 first;
-	__u32 range;
-};
-
-/*
- * Main notification control message
- * *_notify_num 	- number of appropriate cn_notify_req structures after 
- *				this struct.
- * group 		- notification receiver's idx.
- * len 			- total length of the attached data.
- */
-struct cn_ctl_msg {
-	__u32 idx_notify_num;
-	__u32 val_notify_num;
-	__u32 group;
-	__u32 len;
-	__u8 data[0];
-};
-
 #ifdef __KERNEL__
 
 #include <asm/atomic.h>
@@ -151,11 +124,6 @@
 	u32 seq, group;
 };
 
-struct cn_ctl_entry {
-	struct list_head notify_entry;
-	struct cn_ctl_msg *msg;
-};
-
 struct cn_dev {
 	struct cb_id id;
 
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index e84f473..7896227 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -53,7 +53,7 @@
 
 
 extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.6"
+#define REL_VERSION "8.3.7"
 #define API_VERSION 88
 #define PRO_VERSION_MIN 86
 #define PRO_VERSION_MAX 91
diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h
index db5721a..a4d82f8 100644
--- a/include/linux/drbd_nl.h
+++ b/include/linux/drbd_nl.h
@@ -69,6 +69,7 @@
 
 NL_PACKET(resize, 7,
 	NL_INT64(		29,	T_MAY_IGNORE,	resize_size)
+	NL_BIT(			68,	T_MAY_IGNORE,	resize_force)
 )
 
 NL_PACKET(syncer_conf, 8,
diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h
index 94dd103..91bb4f2 100644
--- a/include/linux/eventfd.h
+++ b/include/linux/eventfd.h
@@ -10,6 +10,7 @@
 
 #include <linux/fcntl.h>
 #include <linux/file.h>
+#include <linux/wait.h>
 
 /*
  * CAREFUL: Check include/asm-generic/fcntl.h when defining
@@ -34,6 +35,9 @@
 struct eventfd_ctx *eventfd_ctx_fdget(int fd);
 struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
 int eventfd_signal(struct eventfd_ctx *ctx, int n);
+ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt);
+int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
+				  __u64 *cnt);
 
 #else /* CONFIG_EVENTFD */
 
@@ -61,6 +65,18 @@
 
 }
 
+static inline ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait,
+				       __u64 *cnt)
+{
+	return -ENOSYS;
+}
+
+static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx,
+						wait_queue_t *wait, __u64 *cnt)
+{
+	return -ENOSYS;
+}
+
 #endif
 
 #endif /* _LINUX_EVENTFD_H */
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
index 1f716d9..520ecf8 100644
--- a/include/linux/firewire-cdev.h
+++ b/include/linux/firewire-cdev.h
@@ -380,7 +380,7 @@
  * @immediate:	If non-zero, immediate key to insert before pointer
  * @key:	Upper 8 bits of root directory pointer
  * @data:	Userspace pointer to contents of descriptor block
- * @length:	Length of descriptor block data, in bytes
+ * @length:	Length of descriptor block data, in quadlets
  * @handle:	Handle to the descriptor, written by the kernel
  *
  * Add a descriptor block and optionally a preceding immediate key to the local
@@ -394,6 +394,8 @@
  * If not 0, the @immediate field specifies an immediate key which will be
  * inserted before the root directory pointer.
  *
+ * @immediate, @key, and @data array elements are CPU-endian quadlets.
+ *
  * If successful, the kernel adds the descriptor and writes back a handle to the
  * kernel-side object to be used for later removal of the descriptor block and
  * immediate key.
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 9147ca8..ebb1cd5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -729,6 +729,7 @@
 	uid_t			i_uid;
 	gid_t			i_gid;
 	dev_t			i_rdev;
+	unsigned int		i_blkbits;
 	u64			i_version;
 	loff_t			i_size;
 #ifdef __NEED_I_SIZE_ORDERED
@@ -738,7 +739,6 @@
 	struct timespec		i_mtime;
 	struct timespec		i_ctime;
 	blkcnt_t		i_blocks;
-	unsigned int		i_blkbits;
 	unsigned short          i_bytes;
 	umode_t			i_mode;
 	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
@@ -2463,7 +2463,7 @@
 
 int __init get_filesystem_list(char *buf);
 
-#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
+#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
 #define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE))
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index c6c0c41..9717081 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -256,9 +256,9 @@
 #define part_stat_read(part, field)					\
 ({									\
 	typeof((part)->dkstats->field) res = 0;				\
-	int i;								\
-	for_each_possible_cpu(i)					\
-		res += per_cpu_ptr((part)->dkstats, i)->field;		\
+	unsigned int _cpu;						\
+	for_each_possible_cpu(_cpu)					\
+		res += per_cpu_ptr((part)->dkstats, _cpu)->field;	\
 	res;								\
 })
 
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index 41235c9..5977b72 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -44,7 +44,7 @@
 	return bp->attr.bp_type;
 }
 
-static inline int hw_breakpoint_len(struct perf_event *bp)
+static inline unsigned long hw_breakpoint_len(struct perf_event *bp)
 {
 	return bp->attr.bp_len;
 }
@@ -75,6 +75,8 @@
 extern void unregister_hw_breakpoint(struct perf_event *bp);
 extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events);
 
+extern int dbg_reserve_bp_slot(struct perf_event *bp);
+extern int dbg_release_bp_slot(struct perf_event *bp);
 extern int reserve_bp_slot(struct perf_event *bp);
 extern void release_bp_slot(struct perf_event *bp);
 
diff --git a/include/linux/ima.h b/include/linux/ima.h
index 99dc6d5..975837e 100644
--- a/include/linux/ima.h
+++ b/include/linux/ima.h
@@ -17,7 +17,7 @@
 extern int ima_bprm_check(struct linux_binprm *bprm);
 extern int ima_inode_alloc(struct inode *inode);
 extern void ima_inode_free(struct inode *inode);
-extern int ima_path_check(struct path *path, int mask);
+extern int ima_file_check(struct file *file, int mask);
 extern void ima_file_free(struct file *file);
 extern int ima_file_mmap(struct file *file, unsigned long prot);
 extern void ima_counts_get(struct file *file);
@@ -38,7 +38,7 @@
 	return;
 }
 
-static inline int ima_path_check(struct path *path, int mask)
+static inline int ima_file_check(struct file *file, int mask)
 {
 	return 0;
 }
diff --git a/include/linux/input.h b/include/linux/input.h
index 7be8a65..663208a 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -376,6 +376,7 @@
 #define KEY_DISPLAY_OFF		245	/* display device to off state */
 
 #define KEY_WIMAX		246
+#define KEY_RFKILL		247	/* Key that controls all radios */
 
 /* Range 248 - 255 is reserved for special needs of AT keyboard driver */
 
@@ -660,6 +661,7 @@
 #define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
 #define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
 
 #define ABS_MAX			0x3f
 #define ABS_CNT			(ABS_MAX+1)
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index a632359..78ef023 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -4,32 +4,6 @@
 #include <linux/radix-tree.h>
 #include <linux/rcupdate.h>
 
-/*
- * This is the per-process anticipatory I/O scheduler state.
- */
-struct as_io_context {
-	spinlock_t lock;
-
-	void (*dtor)(struct as_io_context *aic); /* destructor */
-	void (*exit)(struct as_io_context *aic); /* called on task exit */
-
-	unsigned long state;
-	atomic_t nr_queued; /* queued reads & sync writes */
-	atomic_t nr_dispatched; /* number of requests gone to the drivers */
-
-	/* IO History tracking */
-	/* Thinktime */
-	unsigned long last_end_request;
-	unsigned long ttime_total;
-	unsigned long ttime_samples;
-	unsigned long ttime_mean;
-	/* Layout pattern */
-	unsigned int seek_samples;
-	sector_t last_request_pos;
-	u64 seek_total;
-	sector_t seek_mean;
-};
-
 struct cfq_queue;
 struct cfq_io_context {
 	void *key;
@@ -78,7 +52,6 @@
 	unsigned long last_waited; /* Time last woken after wait for request */
 	int nr_batch_requests;     /* Number of requests left in the batch */
 
-	struct as_io_context *aic;
 	struct radix_tree_root radix_root;
 	struct hlist_head cic_list;
 	void *ioc_data;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 3fc9f5a..328bca6 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -734,6 +734,10 @@
 /* Force a compilation error if condition is constant and true */
 #define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))
 
+/* Force a compilation error if a constant expression is not a power of 2 */
+#define BUILD_BUG_ON_NOT_POWER_OF_2(n)			\
+	BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
+
 /* Force a compilation error if condition is true, but also produce a
    result (of value 0 and type size_t), so the expression can be used
    e.g. in a structure initializer (or where-ever else comma expressions
diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 7c6b32a1..bc0fc79 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -67,7 +67,7 @@
 /**
  * DECLARE_KFIFO - macro to declare a kfifo and the associated buffer
  * @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
  *
  * Note1: the macro can be used inside struct or union declaration
  * Note2: the macro creates two objects:
@@ -91,7 +91,7 @@
 /**
  * DEFINE_KFIFO - macro to define and initialize a kfifo
  * @name: name of the declared kfifo datatype
- * @size: size of the fifo buffer
+ * @size: size of the fifo buffer. Must be a power of two.
  *
  * Note1: the macro can be used for global and local kfifo data type variables
  * Note2: the macro creates two objects:
@@ -104,15 +104,28 @@
 
 #undef __kfifo_initializer
 
-extern void kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+extern void kfifo_init(struct kfifo *fifo, void *buffer,
 			unsigned int size);
 extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size,
 			gfp_t gfp_mask);
 extern void kfifo_free(struct kfifo *fifo);
 extern unsigned int kfifo_in(struct kfifo *fifo,
-				const unsigned char *from, unsigned int len);
+				const void *from, unsigned int len);
 extern __must_check unsigned int kfifo_out(struct kfifo *fifo,
-				unsigned char *to, unsigned int len);
+				void *to, unsigned int len);
+extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo,
+				void *to, unsigned int len, unsigned offset);
+
+/**
+ * kfifo_initialized - Check if kfifo is initialized.
+ * @fifo: fifo to check
+ * Return %true if FIFO is initialized, otherwise %false.
+ * Assumes the fifo was 0 before.
+ */
+static inline bool kfifo_initialized(struct kfifo *fifo)
+{
+	return fifo->buffer != NULL;
+}
 
 /**
  * kfifo_reset - removes the entire FIFO contents
@@ -194,7 +207,7 @@
  * bytes copied.
  */
 static inline unsigned int kfifo_in_locked(struct kfifo *fifo,
-		const unsigned char *from, unsigned int n, spinlock_t *lock)
+		const void *from, unsigned int n, spinlock_t *lock)
 {
 	unsigned long flags;
 	unsigned int ret;
@@ -219,7 +232,7 @@
  * @to buffer and returns the number of copied bytes.
  */
 static inline __must_check unsigned int kfifo_out_locked(struct kfifo *fifo,
-	unsigned char *to, unsigned int n, spinlock_t *lock)
+	void *to, unsigned int n, spinlock_t *lock)
 {
 	unsigned long flags;
 	unsigned int ret;
@@ -228,13 +241,6 @@
 
 	ret = kfifo_out(fifo, to, n);
 
-	/*
-	 * optimization: if the FIFO is empty, set the indices to 0
-	 * so we don't wrap the next time
-	 */
-	if (kfifo_is_empty(fifo))
-		kfifo_reset(fifo);
-
 	spin_unlock_irqrestore(lock, flags);
 
 	return ret;
@@ -242,11 +248,11 @@
 
 extern void kfifo_skip(struct kfifo *fifo, unsigned int len);
 
-extern __must_check unsigned int kfifo_from_user(struct kfifo *fifo,
-	const void __user *from, unsigned int n);
+extern __must_check int kfifo_from_user(struct kfifo *fifo,
+	const void __user *from, unsigned int n, unsigned *lenout);
 
-extern __must_check unsigned int kfifo_to_user(struct kfifo *fifo,
-	void __user *to, unsigned int n);
+extern __must_check int kfifo_to_user(struct kfifo *fifo,
+	void __user *to, unsigned int n, unsigned *lenout);
 
 /*
  * __kfifo_add_out internal helper function for updating the out offset
diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h
index e32aa26..24b4414 100644
--- a/include/linux/kmsg_dump.h
+++ b/include/linux/kmsg_dump.h
@@ -17,6 +17,7 @@
 enum kmsg_dump_reason {
 	KMSG_DUMP_OOPS,
 	KMSG_DUMP_PANIC,
+	KMSG_DUMP_KEXEC,
 };
 
 /**
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 6b9c5d0..9cb1834 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -2,6 +2,8 @@
 #define MFD_TMIO_H
 
 #include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
 
 #define tmio_ioread8(addr) readb(addr)
 #define tmio_ioread16(addr) readw(addr)
@@ -18,11 +20,48 @@
 	writew((val) >> 16, (addr) + 2); \
 	} while (0)
 
+#define CNF_CMD     0x04
+#define CNF_CTL_BASE   0x10
+#define CNF_INT_PIN  0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define sd_config_write8(base, shift, reg, val) \
+	tmio_iowrite8((val), (base) + ((reg) << (shift)))
+#define sd_config_write16(base, shift, reg, val) \
+	tmio_iowrite16((val), (base) + ((reg) << (shift)))
+#define sd_config_write32(base, shift, reg, val) \
+	do { \
+		tmio_iowrite16((val), (base) + ((reg) << (shift)));   \
+		tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
+	} while (0)
+
+int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
+int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
+void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
+void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
+
 /*
  * data for the MMC controller
  */
 struct tmio_mmc_data {
 	const unsigned int		hclk;
+	void (*set_pwr)(struct platform_device *host, int state);
+	void (*set_clk_div)(struct platform_device *host, int state);
 };
 
 /*
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
index be3264e..e786fe9 100644
--- a/include/linux/mfd/wm8350/pmic.h
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -666,20 +666,20 @@
 #define WM8350_ISINK_FLASH_DUR_64MS		(1 << 8)
 #define WM8350_ISINK_FLASH_DUR_96MS		(2 << 8)
 #define WM8350_ISINK_FLASH_DUR_1024MS		(3 << 8)
-#define WM8350_ISINK_FLASH_ON_INSTANT		(0 << 4)
-#define WM8350_ISINK_FLASH_ON_0_25S		(1 << 4)
-#define WM8350_ISINK_FLASH_ON_0_50S		(2 << 4)
-#define WM8350_ISINK_FLASH_ON_1_00S		(3 << 4)
-#define WM8350_ISINK_FLASH_ON_1_95S		(1 << 4)
-#define WM8350_ISINK_FLASH_ON_3_91S		(2 << 4)
-#define WM8350_ISINK_FLASH_ON_7_80S		(3 << 4)
-#define WM8350_ISINK_FLASH_OFF_INSTANT		(0 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_25S		(1 << 0)
-#define WM8350_ISINK_FLASH_OFF_0_50S		(2 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_00S		(3 << 0)
-#define WM8350_ISINK_FLASH_OFF_1_95S		(1 << 0)
-#define WM8350_ISINK_FLASH_OFF_3_91S		(2 << 0)
-#define WM8350_ISINK_FLASH_OFF_7_80S		(3 << 0)
+#define WM8350_ISINK_FLASH_ON_INSTANT		(0 << 0)
+#define WM8350_ISINK_FLASH_ON_0_25S		(1 << 0)
+#define WM8350_ISINK_FLASH_ON_0_50S		(2 << 0)
+#define WM8350_ISINK_FLASH_ON_1_00S		(3 << 0)
+#define WM8350_ISINK_FLASH_ON_1_95S		(1 << 0)
+#define WM8350_ISINK_FLASH_ON_3_91S		(2 << 0)
+#define WM8350_ISINK_FLASH_ON_7_80S		(3 << 0)
+#define WM8350_ISINK_FLASH_OFF_INSTANT		(0 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_25S		(1 << 4)
+#define WM8350_ISINK_FLASH_OFF_0_50S		(2 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_00S		(3 << 4)
+#define WM8350_ISINK_FLASH_OFF_1_95S		(1 << 4)
+#define WM8350_ISINK_FLASH_OFF_3_91S		(2 << 4)
+#define WM8350_ISINK_FLASH_OFF_7_80S		(3 << 4)
 
 /*
  * Regulator Interrupts.
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 2265f28..60c467b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1089,6 +1089,7 @@
 
 /* nommu.c */
 extern atomic_long_t mmap_pages_allocated;
+extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
 
 /* prio_tree.c */
 void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 84d020b..36f9627 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -122,7 +122,7 @@
 	unsigned long	vm_pgoff;	/* the offset in vm_file corresponding to vm_start */
 	struct file	*vm_file;	/* the backing file or NULL */
 
-	atomic_t	vm_usage;	/* region usage count */
+	int		vm_usage;	/* region usage count (access under nommu_region_sem) */
 	bool		vm_icache_flushed : 1; /* true if the icache has been flushed for
 						* this region */
 };
@@ -205,10 +205,12 @@
 	struct vm_area_struct * mmap;		/* list of VMAs */
 	struct rb_root mm_rb;
 	struct vm_area_struct * mmap_cache;	/* last find_vma result */
+#ifdef CONFIG_MMU
 	unsigned long (*get_unmapped_area) (struct file *filp,
 				unsigned long addr, unsigned long len,
 				unsigned long pgoff, unsigned long flags);
 	void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
+#endif
 	unsigned long mmap_base;		/* base of mmap area */
 	unsigned long task_size;		/* size of task vm space */
 	unsigned long cached_hole_size; 	/* if non-zero, the largest hole below free_area_cache */
diff --git a/include/linux/mtd/pismo.h b/include/linux/mtd/pismo.h
new file mode 100644
index 0000000..8dfb7e1
--- /dev/null
+++ b/include/linux/mtd/pismo.h
@@ -0,0 +1,17 @@
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef __LINUX_MTD_PISMO_H
+#define __LINUX_MTD_PISMO_H
+
+struct pismo_pdata {
+	void			(*set_vpp)(void *, int);
+	void			*vpp_data;
+	phys_addr_t		cs_addrs[5];
+};
+
+#endif
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index ed5d750..3c62ed4 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -253,6 +253,8 @@
 extern struct page * read_cache_page(struct address_space *mapping,
 				pgoff_t index, filler_t *filler,
 				void *data);
+extern struct page * read_cache_page_gfp(struct address_space *mapping,
+				pgoff_t index, gfp_t gfp_mask);
 extern int read_cache_pages(struct address_space *mapping,
 		struct list_head *pages, filler_t *filler, void *data);
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 174e539..c1968f4 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -756,6 +756,10 @@
 int pci_prepare_to_sleep(struct pci_dev *dev);
 int pci_back_from_sleep(struct pci_dev *dev);
 
+/* For use by arch with custom probe code */
+void set_pcie_port_type(struct pci_dev *pdev);
+void set_pcie_hotplug_bridge(struct pci_dev *pdev);
+
 /* Functions for PCI Hotplug drivers to use */
 int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
 #ifdef CONFIG_HOTPLUG
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index c66b34f..a177698 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -211,11 +211,9 @@
 		__u32		wakeup_watermark; /* bytes before wakeup   */
 	};
 
-	__u32			__reserved_2;
-
-	__u64			bp_addr;
 	__u32			bp_type;
-	__u32			bp_len;
+	__u64			bp_addr;
+	__u64			bp_len;
 };
 
 /*
@@ -814,9 +812,14 @@
  */
 static inline int is_software_event(struct perf_event *event)
 {
-	return (event->attr.type != PERF_TYPE_RAW) &&
-		(event->attr.type != PERF_TYPE_HARDWARE) &&
-		(event->attr.type != PERF_TYPE_HW_CACHE);
+	switch (event->attr.type) {
+	case PERF_TYPE_SOFTWARE:
+	case PERF_TYPE_TRACEPOINT:
+	/* for now the breakpoint stuff also works as software event */
+	case PERF_TYPE_BREAKPOINT:
+		return 1;
+	}
+	return 0;
 }
 
 extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7968def..6a7eb40 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -485,6 +485,7 @@
 int phy_driver_register(struct phy_driver *new_driver);
 void phy_prepare_link(struct phy_device *phydev,
 		void (*adjust_link)(struct net_device *));
+void phy_state_machine(struct work_struct *work);
 void phy_start_machine(struct phy_device *phydev,
 		void (*handler)(struct net_device *));
 void phy_stop_machine(struct phy_device *phydev);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 8d4991b..78efe7c 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -310,6 +310,7 @@
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 extern void softlockup_tick(void);
 extern void touch_softlockup_watchdog(void);
+extern void touch_softlockup_watchdog_sync(void);
 extern void touch_all_softlockup_watchdogs(void);
 extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
 				    void __user *buffer,
@@ -323,6 +324,9 @@
 static inline void touch_softlockup_watchdog(void)
 {
 }
+static inline void touch_softlockup_watchdog_sync(void)
+{
+}
 static inline void touch_all_softlockup_watchdogs(void)
 {
 }
@@ -377,6 +381,8 @@
 
 #include <linux/aio.h>
 
+#ifdef CONFIG_MMU
+extern void arch_pick_mmap_layout(struct mm_struct *mm);
 extern unsigned long
 arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
 		       unsigned long, unsigned long);
@@ -386,6 +392,9 @@
 			  unsigned long flags);
 extern void arch_unmap_area(struct mm_struct *, unsigned long);
 extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
+#else
+static inline void arch_pick_mmap_layout(struct mm_struct *mm) {}
+#endif
 
 #if USE_SPLIT_PTLOCKS
 /*
@@ -1364,7 +1373,7 @@
 	char comm[TASK_COMM_LEN]; /* executable name excluding path
 				     - access with [gs]et_task_comm (which lock
 				       it with task_lock())
-				     - initialized normally by flush_old_exec */
+				     - initialized normally by setup_new_exec */
 /* file system info */
 	int link_count, total_link_count;
 #ifdef CONFIG_SYSVIPC
@@ -2491,8 +2500,6 @@
 
 #endif /* CONFIG_SMP */
 
-extern void arch_pick_mmap_layout(struct mm_struct *mm);
-
 #ifdef CONFIG_TRACING
 extern void
 __trace_special(void *__tr, void *__data,
diff --git a/include/linux/serio.h b/include/linux/serio.h
index e2f3044..813d26c 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -136,25 +136,6 @@
 	spin_unlock_irq(&serio->lock);
 }
 
-/*
- * Use the following functions to pin serio's driver in process context
- */
-static inline int serio_pin_driver(struct serio *serio)
-{
-	return mutex_lock_interruptible(&serio->drv_mutex);
-}
-
-static inline void serio_pin_driver_uninterruptible(struct serio *serio)
-{
-	mutex_lock(&serio->drv_mutex);
-}
-
-static inline void serio_unpin_driver(struct serio *serio)
-{
-	mutex_unlock(&serio->drv_mutex);
-}
-
-
 #endif
 
 /*
diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
index 4231104..6334cee 100644
--- a/include/linux/spi/ad7879.h
+++ b/include/linux/spi/ad7879.h
@@ -28,8 +28,12 @@
 	 * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
 	 */
 	u8	median;
-	/* 1 = AUX/VBAT/GPIO set to GPIO Output */
-	u8	gpio_output;
-	/* Initial GPIO pin state (valid if gpio_output = 1) */
-	u8	gpio_default;
+	/* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
+	 * requires CONFIG_GPIOLIB
+	 */
+	bool	gpio_export;
+	/* identifies the first GPIO number handled by this chip;
+	 * or, if negative, requests dynamic ID allocation.
+	 */
+	s32	gpio_base;
 };
diff --git a/include/linux/string.h b/include/linux/string.h
index 651839a..a716ee2 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -72,7 +72,10 @@
 }
 
 #ifndef __HAVE_ARCH_STRSTR
-extern char * strstr(const char *,const char *);
+extern char * strstr(const char *, const char *);
+#endif
+#ifndef __HAVE_ARCH_STRNSTR
+extern char * strnstr(const char *, const char *, size_t);
 #endif
 #ifndef __HAVE_ARCH_STRLEN
 extern __kernel_size_t strlen(const char *);
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 57e6357..5b81156 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -99,7 +99,7 @@
 				| 1*SD_WAKE_AFFINE			\
 				| 1*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
-				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 1*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
 				| 0*SD_PREFER_SIBLING			\
 				,					\
diff --git a/include/linux/tty.h b/include/linux/tty.h
index ef3a294..6abfcf5 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -464,7 +464,7 @@
 extern void tty_port_free_xmit_buf(struct tty_port *port);
 extern void tty_port_put(struct tty_port *port);
 
-extern inline struct tty_port *tty_port_get(struct tty_port *port)
+static inline struct tty_port *tty_port_get(struct tty_port *port)
 {
 	if (port)
 		kref_get(&port->kref);
@@ -486,7 +486,7 @@
 				struct tty_struct *tty, struct file *filp);
 extern int tty_port_open(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
-extern inline int tty_port_users(struct tty_port *port)
+static inline int tty_port_users(struct tty_port *port)
 {
 	return port->count + port->blocked_open;
 }
diff --git a/include/linux/usb.h b/include/linux/usb.h
index e101a2d..d7ace1b 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -192,6 +192,7 @@
 	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
 	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
 	unsigned reset_running:1;
+	unsigned resetting_device:1;	/* true: bandwidth alloc after reset */
 
 	struct device dev;		/* interface specific device info */
 	struct device *usb_dev;
diff --git a/include/net/ip.h b/include/net/ip.h
index d9a0e74..fb63371 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -338,7 +338,7 @@
 		return inet6_sk(sk)->mc_loop;
 #endif
 	}
-	__WARN();
+	WARN_ON(1);
 	return 1;
 }
 
diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h
index ba1ba0c..63d4498 100644
--- a/include/net/netns/conntrack.h
+++ b/include/net/netns/conntrack.h
@@ -11,6 +11,8 @@
 struct netns_ct {
 	atomic_t		count;
 	unsigned int		expect_count;
+	unsigned int		htable_size;
+	struct kmem_cache	*nf_conntrack_cachep;
 	struct hlist_nulls_head	*hash;
 	struct hlist_head	*expect_hash;
 	struct hlist_nulls_head	unconfirmed;
@@ -28,5 +30,6 @@
 #endif
 	int			hash_vmalloc;
 	int			expect_vmalloc;
+	char			*slabname;
 };
 #endif
diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
index 2eb3814..9a4b8b7 100644
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -40,6 +40,7 @@
 	struct xt_table		*iptable_security;
 	struct xt_table		*nat_table;
 	struct hlist_head	*nat_bysource;
+	unsigned int		nat_htable_size;
 	int			nat_vmalloced;
 #endif
 
diff --git a/include/net/netns/xfrm.h b/include/net/netns/xfrm.h
index 56f8e55..74f119a 100644
--- a/include/net/netns/xfrm.h
+++ b/include/net/netns/xfrm.h
@@ -5,6 +5,7 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/xfrm.h>
+#include <net/dst_ops.h>
 
 struct ctl_table_header;
 
@@ -42,6 +43,11 @@
 	unsigned int		policy_count[XFRM_POLICY_MAX * 2];
 	struct work_struct	policy_hash_work;
 
+	struct dst_ops		xfrm4_dst_ops;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	struct dst_ops		xfrm6_dst_ops;
+#endif
+
 	struct sock		*nlsk;
 	struct sock		*nlsk_stash;
 
diff --git a/include/net/netrom.h b/include/net/netrom.h
index 15696b1..ab170a6 100644
--- a/include/net/netrom.h
+++ b/include/net/netrom.h
@@ -132,6 +132,8 @@
 static __inline__ void nr_neigh_put(struct nr_neigh *nr_neigh)
 {
 	if (atomic_dec_and_test(&nr_neigh->refcount)) {
+		if (nr_neigh->ax25)
+			ax25_cb_put(nr_neigh->ax25);
 		kfree(nr_neigh->digipeat);
 		kfree(nr_neigh);
 	}
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6d85861..60c2770 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1367,8 +1367,8 @@
 extern struct xfrm_state *xfrm_find_acq_byseq(struct net *net, u32 seq);
 extern int xfrm_state_delete(struct xfrm_state *x);
 extern int xfrm_state_flush(struct net *net, u8 proto, struct xfrm_audit *audit_info);
-extern void xfrm_sad_getinfo(struct xfrmk_sadinfo *si);
-extern void xfrm_spd_getinfo(struct xfrmk_spdinfo *si);
+extern void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si);
+extern void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si);
 extern int xfrm_replay_check(struct xfrm_state *x,
 			     struct sk_buff *skb, __be32 seq);
 extern void xfrm_replay_advance(struct xfrm_state *x, __be32 seq);
diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h
index a4b2333..91a4e4f 100644
--- a/include/scsi/scsi_bsg_fc.h
+++ b/include/scsi/scsi_bsg_fc.h
@@ -292,7 +292,7 @@
 		struct fc_bsg_rport_els		r_els;
 		struct fc_bsg_rport_ct		r_ct;
 	} rqst_data;
-};
+} __attribute__((packed));
 
 
 /* response (request sense data) structure of the sg_io_v4 */
diff --git a/init/main.c b/init/main.c
index dac44a9..4cb47a1 100644
--- a/init/main.c
+++ b/init/main.c
@@ -657,9 +657,9 @@
 	proc_caches_init();
 	buffer_init();
 	key_init();
+	radix_tree_init();
 	security_init();
 	vfs_caches_init(totalram_pages);
-	radix_tree_init();
 	signals_init();
 	/* rootfs populating might need page-writeback */
 	page_writeback_init();
diff --git a/ipc/shm.c b/ipc/shm.c
index 92fe923..23256b8 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -298,6 +298,9 @@
 	.mmap		= shm_mmap,
 	.fsync		= shm_fsync,
 	.release	= shm_release,
+#ifndef CONFIG_MMU
+	.get_unmapped_area	= shm_get_unmapped_area,
+#endif
 };
 
 static const struct file_operations shm_file_operations_huge = {
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 1fbcc74..aa3bee5 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2936,14 +2936,17 @@
 
 	for_each_subsys(root, ss) {
 		struct cgroup_subsys_state *css = ss->create(ss, cgrp);
+
 		if (IS_ERR(css)) {
 			err = PTR_ERR(css);
 			goto err_destroy;
 		}
 		init_cgroup_css(css, ss, cgrp);
-		if (ss->use_id)
-			if (alloc_css_id(ss, parent, cgrp))
+		if (ss->use_id) {
+			err = alloc_css_id(ss, parent, cgrp);
+			if (err)
 				goto err_destroy;
+		}
 		/* At error, ->destroy() callback has to free assigned ID. */
 	}
 
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 1c8ddd6..677f253 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -151,13 +151,13 @@
 
 	write_lock_irq(&tasklist_lock);
 	for_each_process(p) {
-		if (task_cpu(p) == cpu &&
+		if (task_cpu(p) == cpu && p->state == TASK_RUNNING &&
 		    (!cputime_eq(p->utime, cputime_zero) ||
 		     !cputime_eq(p->stime, cputime_zero)))
-			printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d\
-				(state = %ld, flags = %x) \n",
-				 p->comm, task_pid_nr(p), cpu,
-				 p->state, p->flags);
+			printk(KERN_WARNING "Task %s (pid = %d) is on cpu %d "
+				"(state = %ld, flags = %x)\n",
+				p->comm, task_pid_nr(p), cpu,
+				p->state, p->flags);
 	}
 	write_unlock_irq(&tasklist_lock);
 }
diff --git a/kernel/cred.c b/kernel/cred.c
index dd76cfe..1ed8ca1 100644
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -224,7 +224,7 @@
 #ifdef CONFIG_KEYS
 	new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL);
 	if (!new->tgcred) {
-		kfree(new);
+		kmem_cache_free(cred_jar, new);
 		return NULL;
 	}
 	atomic_set(&new->tgcred->usage, 1);
diff --git a/kernel/fork.c b/kernel/fork.c
index 5b2959b..f88bd98 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1241,21 +1241,6 @@
 	/* Need tasklist lock for parent etc handling! */
 	write_lock_irq(&tasklist_lock);
 
-	/*
-	 * The task hasn't been attached yet, so its cpus_allowed mask will
-	 * not be changed, nor will its assigned CPU.
-	 *
-	 * The cpus_allowed mask of the parent may have changed after it was
-	 * copied first time - so re-copy it here, then check the child's CPU
-	 * to ensure it is on a valid CPU (and if not, just force it back to
-	 * parent's CPU). This avoids alot of nasty races.
-	 */
-	p->cpus_allowed = current->cpus_allowed;
-	p->rt.nr_cpus_allowed = current->rt.nr_cpus_allowed;
-	if (unlikely(!cpu_isset(task_cpu(p), p->cpus_allowed) ||
-			!cpu_online(task_cpu(p))))
-		set_task_cpu(p, smp_processor_id());
-
 	/* CLONE_PARENT re-uses the old parent */
 	if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
 		p->real_parent = current->real_parent;
diff --git a/kernel/futex.c b/kernel/futex.c
index 8e3c3ff..e7a35f1 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -203,8 +203,6 @@
  * @uaddr:	virtual address of the futex
  * @fshared:	0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
  * @key:	address where result is stored.
- * @rw:		mapping needs to be read/write (values: VERIFY_READ,
- * 		VERIFY_WRITE)
  *
  * Returns a negative error code or 0
  * The key words are stored in *key on success.
@@ -216,7 +214,7 @@
  * lock_page() might sleep, the caller should not hold a spinlock.
  */
 static int
-get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
 {
 	unsigned long address = (unsigned long)uaddr;
 	struct mm_struct *mm = current->mm;
@@ -239,7 +237,7 @@
 	 *        but access_ok() should be faster than find_vma()
 	 */
 	if (!fshared) {
-		if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
+		if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
 			return -EFAULT;
 		key->private.mm = mm;
 		key->private.address = address;
@@ -248,7 +246,7 @@
 	}
 
 again:
-	err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
+	err = get_user_pages_fast(address, 1, 1, &page);
 	if (err < 0)
 		return err;
 
@@ -532,8 +530,25 @@
 				return -EINVAL;
 
 			WARN_ON(!atomic_read(&pi_state->refcount));
-			WARN_ON(pid && pi_state->owner &&
-				pi_state->owner->pid != pid);
+
+			/*
+			 * When pi_state->owner is NULL then the owner died
+			 * and another waiter is on the fly. pi_state->owner
+			 * is fixed up by the task which acquires
+			 * pi_state->rt_mutex.
+			 *
+			 * We do not check for pid == 0 which can happen when
+			 * the owner died and robust_list_exit() cleared the
+			 * TID.
+			 */
+			if (pid && pi_state->owner) {
+				/*
+				 * Bail out if user space manipulated the
+				 * futex value.
+				 */
+				if (pid != task_pid_vnr(pi_state->owner))
+					return -EINVAL;
+			}
 
 			atomic_inc(&pi_state->refcount);
 			*ps = pi_state;
@@ -760,6 +775,13 @@
 	if (!pi_state)
 		return -EINVAL;
 
+	/*
+	 * If current does not own the pi_state then the futex is
+	 * inconsistent and user space fiddled with the futex value.
+	 */
+	if (pi_state->owner != current)
+		return -EINVAL;
+
 	raw_spin_lock(&pi_state->pi_mutex.wait_lock);
 	new_owner = rt_mutex_next_owner(&pi_state->pi_mutex);
 
@@ -867,7 +889,7 @@
 	if (!bitset)
 		return -EINVAL;
 
-	ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
+	ret = get_futex_key(uaddr, fshared, &key);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -913,10 +935,10 @@
 	int ret, op_ret;
 
 retry:
-	ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+	ret = get_futex_key(uaddr1, fshared, &key1);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+	ret = get_futex_key(uaddr2, fshared, &key2);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -1175,11 +1197,10 @@
 		pi_state = NULL;
 	}
 
-	ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
+	ret = get_futex_key(uaddr1, fshared, &key1);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2,
-			    requeue_pi ? VERIFY_WRITE : VERIFY_READ);
+	ret = get_futex_key(uaddr2, fshared, &key2);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -1738,7 +1759,7 @@
 	 */
 retry:
 	q->key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q->key, VERIFY_READ);
+	ret = get_futex_key(uaddr, fshared, &q->key);
 	if (unlikely(ret != 0))
 		return ret;
 
@@ -1904,7 +1925,7 @@
 	q.requeue_pi_key = NULL;
 retry:
 	q.key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
+	ret = get_futex_key(uaddr, fshared, &q.key);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -1974,7 +1995,7 @@
 	/* Unqueue and drop the lock */
 	unqueue_me_pi(&q);
 
-	goto out;
+	goto out_put_key;
 
 out_unlock_put_key:
 	queue_unlock(&q, hb);
@@ -2023,7 +2044,7 @@
 	if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
 		return -EPERM;
 
-	ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
+	ret = get_futex_key(uaddr, fshared, &key);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -2215,7 +2236,7 @@
 	rt_waiter.task = NULL;
 
 	key2 = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
+	ret = get_futex_key(uaddr2, fshared, &key2);
 	if (unlikely(ret != 0))
 		goto out;
 
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 50dbd59..967e6614 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -243,38 +243,70 @@
  *       ((per_cpu(nr_bp_flexible, *) > 1) + max(per_cpu(nr_cpu_bp_pinned, *))
  *            + max(per_cpu(nr_task_bp_pinned, *))) < HBP_NUM
  */
-int reserve_bp_slot(struct perf_event *bp)
+static int __reserve_bp_slot(struct perf_event *bp)
 {
 	struct bp_busy_slots slots = {0};
-	int ret = 0;
-
-	mutex_lock(&nr_bp_mutex);
 
 	fetch_bp_busy_slots(&slots, bp);
 
 	/* Flexible counters need to keep at least one slot */
-	if (slots.pinned + (!!slots.flexible) == HBP_NUM) {
-		ret = -ENOSPC;
-		goto end;
-	}
+	if (slots.pinned + (!!slots.flexible) == HBP_NUM)
+		return -ENOSPC;
 
 	toggle_bp_slot(bp, true);
 
-end:
+	return 0;
+}
+
+int reserve_bp_slot(struct perf_event *bp)
+{
+	int ret;
+
+	mutex_lock(&nr_bp_mutex);
+
+	ret = __reserve_bp_slot(bp);
+
 	mutex_unlock(&nr_bp_mutex);
 
 	return ret;
 }
 
+static void __release_bp_slot(struct perf_event *bp)
+{
+	toggle_bp_slot(bp, false);
+}
+
 void release_bp_slot(struct perf_event *bp)
 {
 	mutex_lock(&nr_bp_mutex);
 
-	toggle_bp_slot(bp, false);
+	__release_bp_slot(bp);
 
 	mutex_unlock(&nr_bp_mutex);
 }
 
+/*
+ * Allow the kernel debugger to reserve breakpoint slots without
+ * taking a lock using the dbg_* variant of for the reserve and
+ * release breakpoint slots.
+ */
+int dbg_reserve_bp_slot(struct perf_event *bp)
+{
+	if (mutex_is_locked(&nr_bp_mutex))
+		return -1;
+
+	return __reserve_bp_slot(bp);
+}
+
+int dbg_release_bp_slot(struct perf_event *bp)
+{
+	if (mutex_is_locked(&nr_bp_mutex))
+		return -1;
+
+	__release_bp_slot(bp);
+
+	return 0;
+}
 
 int register_perf_hw_breakpoint(struct perf_event *bp)
 {
@@ -296,6 +328,10 @@
 	if (!bp->attr.disabled || !bp->overflow_handler)
 		ret = arch_validate_hwbkpt_settings(bp, bp->ctx->task);
 
+	/* if arch_validate_hwbkpt_settings() fails then release bp slot */
+	if (ret)
+		release_bp_slot(bp);
+
 	return ret;
 }
 
@@ -324,8 +360,8 @@
 int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr)
 {
 	u64 old_addr = bp->attr.bp_addr;
+	u64 old_len = bp->attr.bp_len;
 	int old_type = bp->attr.bp_type;
-	int old_len = bp->attr.bp_len;
 	int err = 0;
 
 	perf_event_disable(bp);
diff --git a/kernel/kexec.c b/kernel/kexec.c
index a9a93d9..ef077fb 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -32,6 +32,7 @@
 #include <linux/console.h>
 #include <linux/vmalloc.h>
 #include <linux/swap.h>
+#include <linux/kmsg_dump.h>
 
 #include <asm/page.h>
 #include <asm/uaccess.h>
@@ -1074,6 +1075,9 @@
 	if (mutex_trylock(&kexec_mutex)) {
 		if (kexec_crash_image) {
 			struct pt_regs fixed_regs;
+
+			kmsg_dump(KMSG_DUMP_KEXEC);
+
 			crash_setup_regs(&fixed_regs, regs);
 			crash_save_vmcoreinfo();
 			machine_crash_shutdown(&fixed_regs);
diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index e92d519..35edbe22 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -28,7 +28,7 @@
 #include <linux/log2.h>
 #include <linux/uaccess.h>
 
-static void _kfifo_init(struct kfifo *fifo, unsigned char *buffer,
+static void _kfifo_init(struct kfifo *fifo, void *buffer,
 		unsigned int size)
 {
 	fifo->buffer = buffer;
@@ -41,10 +41,10 @@
  * kfifo_init - initialize a FIFO using a preallocated buffer
  * @fifo: the fifo to assign the buffer
  * @buffer: the preallocated buffer to be used.
- * @size: the size of the internal buffer, this have to be a power of 2.
+ * @size: the size of the internal buffer, this has to be a power of 2.
  *
  */
-void kfifo_init(struct kfifo *fifo, unsigned char *buffer, unsigned int size)
+void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size)
 {
 	/* size must be a power of 2 */
 	BUG_ON(!is_power_of_2(size));
@@ -80,7 +80,7 @@
 
 	buffer = kmalloc(size, gfp_mask);
 	if (!buffer) {
-		_kfifo_init(fifo, 0, 0);
+		_kfifo_init(fifo, NULL, 0);
 		return -ENOMEM;
 	}
 
@@ -97,6 +97,7 @@
 void kfifo_free(struct kfifo *fifo)
 {
 	kfree(fifo->buffer);
+	_kfifo_init(fifo, NULL, 0);
 }
 EXPORT_SYMBOL(kfifo_free);
 
@@ -159,8 +160,9 @@
 	memcpy(to + l, fifo->buffer, len - l);
 }
 
-static inline unsigned int __kfifo_from_user_data(struct kfifo *fifo,
-	 const void __user *from, unsigned int len, unsigned int off)
+static inline int __kfifo_from_user_data(struct kfifo *fifo,
+	 const void __user *from, unsigned int len, unsigned int off,
+	 unsigned *lenout)
 {
 	unsigned int l;
 	int ret;
@@ -177,16 +179,20 @@
 	/* first put the data starting from fifo->in to buffer end */
 	l = min(len, fifo->size - off);
 	ret = copy_from_user(fifo->buffer + off, from, l);
-
-	if (unlikely(ret))
-		return ret + len - l;
+	if (unlikely(ret)) {
+		*lenout = ret;
+		return -EFAULT;
+	}
+	*lenout = l;
 
 	/* then put the rest (if any) at the beginning of the buffer */
-	return copy_from_user(fifo->buffer, from + l, len - l);
+	ret = copy_from_user(fifo->buffer, from + l, len - l);
+	*lenout += ret ? ret : len - l;
+	return ret ? -EFAULT : 0;
 }
 
-static inline unsigned int __kfifo_to_user_data(struct kfifo *fifo,
-		void __user *to, unsigned int len, unsigned int off)
+static inline int __kfifo_to_user_data(struct kfifo *fifo,
+		void __user *to, unsigned int len, unsigned int off, unsigned *lenout)
 {
 	unsigned int l;
 	int ret;
@@ -203,12 +209,21 @@
 	/* first get the data from fifo->out until the end of the buffer */
 	l = min(len, fifo->size - off);
 	ret = copy_to_user(to, fifo->buffer + off, l);
-
-	if (unlikely(ret))
-		return ret + len - l;
+	*lenout = l;
+	if (unlikely(ret)) {
+		*lenout -= ret;
+		return -EFAULT;
+	}
 
 	/* then get the rest (if any) from the beginning of the buffer */
-	return copy_to_user(to + l, fifo->buffer, len - l);
+	len -= l;
+	ret = copy_to_user(to + l, fifo->buffer, len);
+	if (unlikely(ret)) {
+		*lenout += len - ret;
+		return -EFAULT;
+	}
+	*lenout += len;
+	return 0;
 }
 
 unsigned int __kfifo_in_n(struct kfifo *fifo,
@@ -235,7 +250,7 @@
  * Note that with only one concurrent reader and one concurrent
  * writer, you don't need extra locking to use these functions.
  */
-unsigned int kfifo_in(struct kfifo *fifo, const unsigned char *from,
+unsigned int kfifo_in(struct kfifo *fifo, const void *from,
 				unsigned int len)
 {
 	len = min(kfifo_avail(fifo), len);
@@ -277,7 +292,7 @@
  * Note that with only one concurrent reader and one concurrent
  * writer, you don't need extra locking to use these functions.
  */
-unsigned int kfifo_out(struct kfifo *fifo, unsigned char *to, unsigned int len)
+unsigned int kfifo_out(struct kfifo *fifo, void *to, unsigned int len)
 {
 	len = min(kfifo_len(fifo), len);
 
@@ -288,6 +303,27 @@
 }
 EXPORT_SYMBOL(kfifo_out);
 
+/**
+ * kfifo_out_peek - copy some data from the FIFO, but do not remove it
+ * @fifo: the fifo to be used.
+ * @to: where the data must be copied.
+ * @len: the size of the destination buffer.
+ * @offset: offset into the fifo
+ *
+ * This function copies at most @len bytes at @offset from the FIFO
+ * into the @to buffer and returns the number of copied bytes.
+ * The data is not removed from the FIFO.
+ */
+unsigned int kfifo_out_peek(struct kfifo *fifo, void *to, unsigned int len,
+			    unsigned offset)
+{
+	len = min(kfifo_len(fifo), len + offset);
+
+	__kfifo_out_data(fifo, to, len, offset);
+	return len;
+}
+EXPORT_SYMBOL(kfifo_out_peek);
+
 unsigned int __kfifo_out_generic(struct kfifo *fifo,
 	void *to, unsigned int len, unsigned int recsize,
 	unsigned int *total)
@@ -299,10 +335,13 @@
 unsigned int __kfifo_from_user_n(struct kfifo *fifo,
 	const void __user *from, unsigned int len, unsigned int recsize)
 {
+	unsigned total;
+
 	if (kfifo_avail(fifo) < len + recsize)
 		return len + 1;
 
-	return __kfifo_from_user_data(fifo, from, len, recsize);
+	__kfifo_from_user_data(fifo, from, len, recsize, &total);
+	return total;
 }
 EXPORT_SYMBOL(__kfifo_from_user_n);
 
@@ -311,20 +350,24 @@
  * @fifo: the fifo to be used.
  * @from: pointer to the data to be added.
  * @len: the length of the data to be added.
+ * @total: the actual returned data length.
  *
  * This function copies at most @len bytes from the @from into the
- * FIFO depending and returns the number of copied bytes.
+ * FIFO depending and returns -EFAULT/0.
  *
  * Note that with only one concurrent reader and one concurrent
  * writer, you don't need extra locking to use these functions.
  */
-unsigned int kfifo_from_user(struct kfifo *fifo,
-	const void __user *from, unsigned int len)
+int kfifo_from_user(struct kfifo *fifo,
+        const void __user *from, unsigned int len, unsigned *total)
 {
+	int ret;
 	len = min(kfifo_avail(fifo), len);
-	len -= __kfifo_from_user_data(fifo, from, len, 0);
+	ret = __kfifo_from_user_data(fifo, from, len, 0, total);
+	if (ret)
+		return ret;
 	__kfifo_add_in(fifo, len);
-	return len;
+	return 0;
 }
 EXPORT_SYMBOL(kfifo_from_user);
 
@@ -339,17 +382,17 @@
 	void __user *to, unsigned int len, unsigned int reclen,
 	unsigned int recsize)
 {
-	unsigned int ret;
+	unsigned int ret, total;
 
 	if (kfifo_len(fifo) < reclen + recsize)
 		return len;
 
-	ret = __kfifo_to_user_data(fifo, to, reclen, recsize);
+	ret = __kfifo_to_user_data(fifo, to, reclen, recsize, &total);
 
 	if (likely(ret == 0))
 		__kfifo_add_out(fifo, reclen + recsize);
 
-	return ret;
+	return total;
 }
 EXPORT_SYMBOL(__kfifo_to_user_n);
 
@@ -358,20 +401,22 @@
  * @fifo: the fifo to be used.
  * @to: where the data must be copied.
  * @len: the size of the destination buffer.
+ * @lenout: pointer to output variable with copied data
  *
  * This function copies at most @len bytes from the FIFO into the
- * @to buffer and returns the number of copied bytes.
+ * @to buffer and 0 or -EFAULT.
  *
  * Note that with only one concurrent reader and one concurrent
  * writer, you don't need extra locking to use these functions.
  */
-unsigned int kfifo_to_user(struct kfifo *fifo,
-	void __user *to, unsigned int len)
+int kfifo_to_user(struct kfifo *fifo,
+	void __user *to, unsigned int len, unsigned *lenout)
 {
+	int ret;
 	len = min(kfifo_len(fifo), len);
-	len -= __kfifo_to_user_data(fifo, to, len, 0);
-	__kfifo_add_out(fifo, len);
-	return len;
+	ret = __kfifo_to_user_data(fifo, to, len, 0, lenout);
+	__kfifo_add_out(fifo, *lenout);
+	return ret;
 }
 EXPORT_SYMBOL(kfifo_to_user);
 
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 2eb517e..761fdd2 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -583,6 +583,9 @@
 	smp_wmb();
 	atomic_set(&cpu_in_kgdb[cpu], 1);
 
+	/* Disable any cpu specific hw breakpoints */
+	kgdb_disable_hw_debug(regs);
+
 	/* Wait till primary CPU is done with debugging */
 	while (atomic_read(&passive_cpu_wait[cpu]))
 		cpu_relax();
@@ -596,7 +599,7 @@
 
 	/* Signal the primary CPU that we are done: */
 	atomic_set(&cpu_in_kgdb[cpu], 0);
-	touch_softlockup_watchdog();
+	touch_softlockup_watchdog_sync();
 	clocksource_touch_watchdog();
 	local_irq_restore(flags);
 }
@@ -1450,7 +1453,7 @@
 	    (kgdb_info[cpu].task &&
 	     kgdb_info[cpu].task->pid != kgdb_sstep_pid) && --sstep_tries) {
 		atomic_set(&kgdb_active, -1);
-		touch_softlockup_watchdog();
+		touch_softlockup_watchdog_sync();
 		clocksource_touch_watchdog();
 		local_irq_restore(flags);
 
@@ -1550,7 +1553,7 @@
 	}
 	/* Free kgdb_active */
 	atomic_set(&kgdb_active, -1);
-	touch_softlockup_watchdog();
+	touch_softlockup_watchdog_sync();
 	clocksource_touch_watchdog();
 	local_irq_restore(flags);
 
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 5feaddc..c62ec14 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -2147,7 +2147,7 @@
 		return ret;
 
 	return print_irq_inversion_bug(curr, &root, target_entry,
-					this, 1, irqclass);
+					this, 0, irqclass);
 }
 
 void print_irqtrace_events(struct task_struct *curr)
diff --git a/kernel/panic.c b/kernel/panic.c
index 5827f7b..c787333 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -75,7 +75,6 @@
 	dump_stack();
 #endif
 
-	kmsg_dump(KMSG_DUMP_PANIC);
 	/*
 	 * If we have crashed and we have a crash kernel loaded let it handle
 	 * everything else.
@@ -83,6 +82,8 @@
 	 */
 	crash_kexec(NULL);
 
+	kmsg_dump(KMSG_DUMP_PANIC);
+
 	/*
 	 * Note smp_send_stop is the usual smp shutdown function, which
 	 * unfortunately means it may not be hardened to work in a panic
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 603c0d8b..2ae7409 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -3259,8 +3259,6 @@
 	task_event->event_id.tid = perf_event_tid(event, task);
 	task_event->event_id.ptid = perf_event_tid(event, current);
 
-	task_event->event_id.time = perf_clock();
-
 	perf_output_put(&handle, task_event->event_id);
 
 	perf_output_end(&handle);
@@ -3268,6 +3266,9 @@
 
 static int perf_event_task_match(struct perf_event *event)
 {
+	if (event->state < PERF_EVENT_STATE_INACTIVE)
+		return 0;
+
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
 		return 0;
 
@@ -3297,7 +3298,7 @@
 	cpuctx = &get_cpu_var(perf_cpu_context);
 	perf_event_task_ctx(&cpuctx->ctx, task_event);
 	if (!ctx)
-		ctx = rcu_dereference(task_event->task->perf_event_ctxp);
+		ctx = rcu_dereference(current->perf_event_ctxp);
 	if (ctx)
 		perf_event_task_ctx(ctx, task_event);
 	put_cpu_var(perf_cpu_context);
@@ -3328,6 +3329,7 @@
 			/* .ppid */
 			/* .tid  */
 			/* .ptid */
+			.time = perf_clock(),
 		},
 	};
 
@@ -3377,6 +3379,9 @@
 
 static int perf_event_comm_match(struct perf_event *event)
 {
+	if (event->state < PERF_EVENT_STATE_INACTIVE)
+		return 0;
+
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
 		return 0;
 
@@ -3494,6 +3499,9 @@
 static int perf_event_mmap_match(struct perf_event *event,
 				   struct perf_mmap_event *mmap_event)
 {
+	if (event->state < PERF_EVENT_STATE_INACTIVE)
+		return 0;
+
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
 		return 0;
 
@@ -4571,7 +4579,7 @@
 	if (attr->type >= PERF_TYPE_MAX)
 		return -EINVAL;
 
-	if (attr->__reserved_1 || attr->__reserved_2)
+	if (attr->__reserved_1)
 		return -EINVAL;
 
 	if (attr->sample_type & ~(PERF_SAMPLE_MAX-1))
diff --git a/kernel/printk.c b/kernel/printk.c
index 17463ca..1751c456 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -1467,6 +1467,7 @@
 static const char const *kmsg_reasons[] = {
 	[KMSG_DUMP_OOPS]	= "oops",
 	[KMSG_DUMP_PANIC]	= "panic",
+	[KMSG_DUMP_KEXEC]	= "kexec",
 };
 
 static const char *kmsg_to_str(enum kmsg_dump_reason reason)
diff --git a/kernel/sched.c b/kernel/sched.c
index c535cc4..3a8fb30 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2320,14 +2320,12 @@
 }
 
 /*
- * Called from:
+ * Gets called from 3 sites (exec, fork, wakeup), since it is called without
+ * holding rq->lock we need to ensure ->cpus_allowed is stable, this is done
+ * by:
  *
- *  - fork, @p is stable because it isn't on the tasklist yet
- *
- *  - exec, @p is unstable, retry loop
- *
- *  - wake-up, we serialize ->cpus_allowed against TASK_WAKING so
- *             we should be good.
+ *  exec:           is unstable, retry loop
+ *  fork & wake-up: serialize ->cpus_allowed against TASK_WAKING
  */
 static inline
 int select_task_rq(struct task_struct *p, int sd_flags, int wake_flags)
@@ -2620,9 +2618,6 @@
 	if (p->sched_class->task_fork)
 		p->sched_class->task_fork(p);
 
-#ifdef CONFIG_SMP
-	cpu = select_task_rq(p, SD_BALANCE_FORK, 0);
-#endif
 	set_task_cpu(p, cpu);
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
@@ -2652,6 +2647,21 @@
 {
 	unsigned long flags;
 	struct rq *rq;
+	int cpu = get_cpu();
+
+#ifdef CONFIG_SMP
+	/*
+	 * Fork balancing, do it here and not earlier because:
+	 *  - cpus_allowed can change in the fork path
+	 *  - any previously selected cpu might disappear through hotplug
+	 *
+	 * We still have TASK_WAKING but PF_STARTING is gone now, meaning
+	 * ->cpus_allowed is stable, we have preemption disabled, meaning
+	 * cpu_online_mask is stable.
+	 */
+	cpu = select_task_rq(p, SD_BALANCE_FORK, 0);
+	set_task_cpu(p, cpu);
+#endif
 
 	rq = task_rq_lock(p, &flags);
 	BUG_ON(p->state != TASK_WAKING);
@@ -2665,6 +2675,7 @@
 		p->sched_class->task_woken(rq, p);
 #endif
 	task_rq_unlock(rq, &flags);
+	put_cpu();
 }
 
 #ifdef CONFIG_PREEMPT_NOTIFIERS
@@ -5530,8 +5541,11 @@
 
 	post_schedule(rq);
 
-	if (unlikely(reacquire_kernel_lock(current) < 0))
+	if (unlikely(reacquire_kernel_lock(current) < 0)) {
+		prev = rq->curr;
+		switch_count = &prev->nivcsw;
 		goto need_resched_nonpreemptible;
+	}
 
 	preempt_enable_no_resched();
 	if (need_resched())
@@ -7136,14 +7150,18 @@
 	 * the ->cpus_allowed mask from under waking tasks, which would be
 	 * possible when we change rq->lock in ttwu(), so synchronize against
 	 * TASK_WAKING to avoid that.
+	 *
+	 * Make an exception for freshly cloned tasks, since cpuset namespaces
+	 * might move the task about, we have to validate the target in
+	 * wake_up_new_task() anyway since the cpu might have gone away.
 	 */
 again:
-	while (p->state == TASK_WAKING)
+	while (p->state == TASK_WAKING && !(p->flags & PF_STARTING))
 		cpu_relax();
 
 	rq = task_rq_lock(p, &flags);
 
-	if (p->state == TASK_WAKING) {
+	if (p->state == TASK_WAKING && !(p->flags & PF_STARTING)) {
 		task_rq_unlock(rq, &flags);
 		goto again;
 	}
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 42ac3c9..8fe7ee8 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1508,7 +1508,7 @@
 			 * If there's an idle sibling in this domain, make that
 			 * the wake_affine target instead of the current cpu.
 			 */
-			if (tmp->flags & SD_PREFER_SIBLING)
+			if (tmp->flags & SD_SHARE_PKG_RESOURCES)
 				target = select_idle_sibling(p, tmp, target);
 
 			if (target >= 0) {
diff --git a/kernel/smp.c b/kernel/smp.c
index de735a6..f104084 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -347,7 +347,7 @@
 		goto call;
 
 	/* Try for same node. */
-	nodemask = cpumask_of_node(cpu);
+	nodemask = cpumask_of_node(cpu_to_node(cpu));
 	for (cpu = cpumask_first_and(nodemask, mask); cpu < nr_cpu_ids;
 	     cpu = cpumask_next_and(cpu, nodemask, mask)) {
 		if (cpu_online(cpu))
diff --git a/kernel/softirq.c b/kernel/softirq.c
index a09502e..7c1a67e 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -500,22 +500,17 @@
  */
 
 /*
- * The trampoline is called when the hrtimer expires. If this is
- * called from the hrtimer interrupt then we schedule the tasklet as
- * the timer callback function expects to run in softirq context. If
- * it's called in softirq context anyway (i.e. high resolution timers
- * disabled) then the hrtimer callback is called right away.
+ * The trampoline is called when the hrtimer expires. It schedules a tasklet
+ * to run __tasklet_hrtimer_trampoline() which in turn will call the intended
+ * hrtimer callback, but from softirq context.
  */
 static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
 {
 	struct tasklet_hrtimer *ttimer =
 		container_of(timer, struct tasklet_hrtimer, timer);
 
-	if (hrtimer_is_hres_active(timer)) {
-		tasklet_hi_schedule(&ttimer->tasklet);
-		return HRTIMER_NORESTART;
-	}
-	return ttimer->function(timer);
+	tasklet_hi_schedule(&ttimer->tasklet);
+	return HRTIMER_NORESTART;
 }
 
 /*
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index d225790..0d4c789 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -25,6 +25,7 @@
 static DEFINE_PER_CPU(unsigned long, softlockup_touch_ts); /* touch timestamp */
 static DEFINE_PER_CPU(unsigned long, softlockup_print_ts); /* print timestamp */
 static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog);
+static DEFINE_PER_CPU(bool, softlock_touch_sync);
 
 static int __read_mostly did_panic;
 int __read_mostly softlockup_thresh = 60;
@@ -79,6 +80,12 @@
 }
 EXPORT_SYMBOL(touch_softlockup_watchdog);
 
+void touch_softlockup_watchdog_sync(void)
+{
+	__raw_get_cpu_var(softlock_touch_sync) = true;
+	__raw_get_cpu_var(softlockup_touch_ts) = 0;
+}
+
 void touch_all_softlockup_watchdogs(void)
 {
 	int cpu;
@@ -118,6 +125,14 @@
 	}
 
 	if (touch_ts == 0) {
+		if (unlikely(per_cpu(softlock_touch_sync, this_cpu))) {
+			/*
+			 * If the time stamp was touched atomically
+			 * make sure the scheduler tick is up to date.
+			 */
+			per_cpu(softlock_touch_sync, this_cpu) = false;
+			sched_clock_tick();
+		}
 		__touch_softlockup_watchdog();
 		return;
 	}
diff --git a/kernel/sys.c b/kernel/sys.c
index 26a6b73..18bde97 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -222,6 +222,7 @@
 	if (which > PRIO_USER || which < PRIO_PROCESS)
 		return -EINVAL;
 
+	rcu_read_lock();
 	read_lock(&tasklist_lock);
 	switch (which) {
 		case PRIO_PROCESS:
@@ -267,6 +268,7 @@
 	}
 out_unlock:
 	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return retval;
 }
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 6f740d9..d7395fd 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -259,7 +259,8 @@
 		cpu = *((int *)arg);
 		list_for_each_entry_safe(dev, tmp, &clockevent_devices, list) {
 			if (cpumask_test_cpu(cpu, dev->cpumask) &&
-			    cpumask_weight(dev->cpumask) == 1) {
+			    cpumask_weight(dev->cpumask) == 1 &&
+			    !tick_is_broadcast_device(dev)) {
 				BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
 				list_del(&dev->list);
 			}
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index e85c234..1370083 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -343,7 +343,19 @@
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&watchdog_lock, flags);
+	/*
+	 * We use trylock here to avoid a potential dead lock when
+	 * kgdb calls this code after the kernel has been stopped with
+	 * watchdog_lock held. When watchdog_lock is held we just
+	 * return and accept, that the watchdog might trigger and mark
+	 * the monitored clock source (usually TSC) unstable.
+	 *
+	 * This does not affect the other caller clocksource_resume()
+	 * because at this point the kernel is UP, interrupts are
+	 * disabled and nothing can hold watchdog_lock.
+	 */
+	if (!spin_trylock_irqsave(&watchdog_lock, flags))
+		return;
 	clocksource_reset_watchdog();
 	spin_unlock_irqrestore(&watchdog_lock, flags);
 }
@@ -458,8 +470,8 @@
  * clocksource_touch_watchdog - Update watchdog
  *
  * Update the watchdog after exception contexts such as kgdb so as not
- * to incorrectly trip the watchdog.
- *
+ * to incorrectly trip the watchdog. This might fail when the kernel
+ * was stopped in code which holds watchdog_lock.
  */
 void clocksource_touch_watchdog(void)
 {
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 7faaa32..e2ab064 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -880,6 +880,7 @@
 
 	set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec);
 }
+EXPORT_SYMBOL_GPL(getboottime);
 
 /**
  * monotonic_to_bootbased - Convert the monotonic time to boot based.
@@ -889,6 +890,7 @@
 {
 	*ts = timespec_add_safe(*ts, total_sleep_time);
 }
+EXPORT_SYMBOL_GPL(monotonic_to_bootbased);
 
 unsigned long get_seconds(void)
 {
diff --git a/kernel/timer.c b/kernel/timer.c
index 15533b7..c61a794 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1198,6 +1198,7 @@
 	run_local_timers();
 	rcu_check_callbacks(cpu, user_tick);
 	printk_tick();
+	perf_event_do_pending();
 	scheduler_tick();
 	run_posix_cpu_timers(p);
 }
@@ -1209,8 +1210,6 @@
 {
 	struct tvec_base *base = __get_cpu_var(tvec_bases);
 
-	perf_event_do_pending();
-
 	hrtimer_run_pending();
 
 	if (time_after_eq(jiffies, base->timer_jiffies))
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 6c22d8a..60e2ce0 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -27,9 +27,7 @@
 config HAVE_FUNCTION_GRAPH_FP_TEST
 	bool
 	help
-	 An arch may pass in a unique value (frame pointer) to both the
-	 entering and exiting of a function. On exit, the value is compared
-	 and if it does not match, then it will panic the kernel.
+	  See Documentation/trace/ftrace-design.txt
 
 config HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	bool
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7968762..1e6640f 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1690,7 +1690,7 @@
 static int ftrace_match(char *str, char *regex, int len, int type)
 {
 	int matched = 0;
-	char *ptr;
+	int slen;
 
 	switch (type) {
 	case MATCH_FULL:
@@ -1706,8 +1706,8 @@
 			matched = 1;
 		break;
 	case MATCH_END_ONLY:
-		ptr = strstr(str, regex);
-		if (ptr && (ptr[len] == 0))
+		slen = strlen(str);
+		if (slen >= len && memcmp(str + slen - len, regex, len) == 0)
 			matched = 1;
 		break;
 	}
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 2326b04..8c1b2d2 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -464,6 +464,8 @@
 	struct ring_buffer_per_cpu	*cpu_buffer;
 	unsigned long			head;
 	struct buffer_page		*head_page;
+	struct buffer_page		*cache_reader_page;
+	unsigned long			cache_read;
 	u64				read_stamp;
 };
 
@@ -2716,6 +2718,8 @@
 		iter->read_stamp = cpu_buffer->read_stamp;
 	else
 		iter->read_stamp = iter->head_page->page->time_stamp;
+	iter->cache_reader_page = cpu_buffer->reader_page;
+	iter->cache_read = cpu_buffer->read;
 }
 
 /**
@@ -2869,7 +2873,7 @@
 	 * Splice the empty reader page into the list around the head.
 	 */
 	reader = rb_set_head_page(cpu_buffer);
-	cpu_buffer->reader_page->list.next = reader->list.next;
+	cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next);
 	cpu_buffer->reader_page->list.prev = reader->list.prev;
 
 	/*
@@ -2906,7 +2910,7 @@
 	 *
 	 * Now make the new head point back to the reader page.
 	 */
-	reader->list.next->prev = &cpu_buffer->reader_page->list;
+	rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
 	rb_inc_page(cpu_buffer, &cpu_buffer->head_page);
 
 	/* Finally update the reader page to the new head */
@@ -3060,13 +3064,22 @@
 	struct ring_buffer_event *event;
 	int nr_loops = 0;
 
-	if (ring_buffer_iter_empty(iter))
-		return NULL;
-
 	cpu_buffer = iter->cpu_buffer;
 	buffer = cpu_buffer->buffer;
 
+	/*
+	 * Check if someone performed a consuming read to
+	 * the buffer. A consuming read invalidates the iterator
+	 * and we need to reset the iterator in this case.
+	 */
+	if (unlikely(iter->cache_read != cpu_buffer->read ||
+		     iter->cache_reader_page != cpu_buffer->reader_page))
+		rb_iter_reset(iter);
+
  again:
+	if (ring_buffer_iter_empty(iter))
+		return NULL;
+
 	/*
 	 * We repeat when a timestamp is encountered.
 	 * We can get multiple timestamps by nested interrupts or also
@@ -3081,6 +3094,11 @@
 	if (rb_per_cpu_empty(cpu_buffer))
 		return NULL;
 
+	if (iter->head >= local_read(&iter->head_page->page->commit)) {
+		rb_inc_iter(iter);
+		goto again;
+	}
+
 	event = rb_iter_head_event(iter);
 
 	switch (event->type_len) {
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 0df1b0f..eac6875 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -951,6 +951,11 @@
 		return;
 	}
 
+	if (WARN_ON_ONCE(pid < 0)) {
+		strcpy(comm, "<XXX>");
+		return;
+	}
+
 	if (pid > PID_MAX_DEFAULT) {
 		strcpy(comm, "<...>");
 		return;
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 50504cb..e42af9a 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -211,8 +211,9 @@
 {
 	char **addr = (char **)(event + pred->offset);
 	int cmp, match;
+	int len = strlen(*addr) + 1;	/* including tailing '\0' */
 
-	cmp = pred->regex.match(*addr, &pred->regex, pred->regex.field_len);
+	cmp = pred->regex.match(*addr, &pred->regex, len);
 
 	match = cmp ^ pred->not;
 
@@ -251,7 +252,18 @@
 	return 0;
 }
 
-/* Basic regex callbacks */
+/*
+ * regex_match_foo - Basic regex callbacks
+ *
+ * @str: the string to be searched
+ * @r:   the regex structure containing the pattern string
+ * @len: the length of the string to be searched (including '\0')
+ *
+ * Note:
+ * - @str might not be NULL-terminated if it's of type DYN_STRING
+ *   or STATIC_STRING
+ */
+
 static int regex_match_full(char *str, struct regex *r, int len)
 {
 	if (strncmp(str, r->pattern, len) == 0)
@@ -261,23 +273,24 @@
 
 static int regex_match_front(char *str, struct regex *r, int len)
 {
-	if (strncmp(str, r->pattern, len) == 0)
+	if (strncmp(str, r->pattern, r->len) == 0)
 		return 1;
 	return 0;
 }
 
 static int regex_match_middle(char *str, struct regex *r, int len)
 {
-	if (strstr(str, r->pattern))
+	if (strnstr(str, r->pattern, len))
 		return 1;
 	return 0;
 }
 
 static int regex_match_end(char *str, struct regex *r, int len)
 {
-	char *ptr = strstr(str, r->pattern);
+	int strlen = len - 1;
 
-	if (ptr && (ptr[r->len] == 0))
+	if (strlen >= r->len &&
+	    memcmp(str + strlen - r->len, r->pattern, r->len) == 0)
 		return 1;
 	return 0;
 }
@@ -781,10 +794,8 @@
 			pred->regex.field_len = field->size;
 		} else if (field->filter_type == FILTER_DYN_STRING)
 			fn = filter_pred_strloc;
-		else {
+		else
 			fn = filter_pred_pchar;
-			pred->regex.field_len = strlen(pred->regex.pattern);
-		}
 	} else {
 		if (field->is_signed)
 			ret = strict_strtoll(pred->regex.pattern, 0, &val);
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 6ea90c0..50b1b82 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -689,7 +689,7 @@
 			return -EINVAL;
 		}
 		/* an address specified */
-		ret = strict_strtoul(&argv[0][2], 0, (unsigned long *)&addr);
+		ret = strict_strtoul(&argv[1][0], 0, (unsigned long *)&addr);
 		if (ret) {
 			pr_info("Failed to parse address.\n");
 			return ret;
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index 678a512..f4bc9b2 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -157,6 +157,7 @@
 	unsigned long val, flags;
 	char buf[64];
 	int ret;
+	int cpu;
 
 	if (count >= sizeof(buf))
 		return -EINVAL;
@@ -171,9 +172,20 @@
 		return ret;
 
 	local_irq_save(flags);
+
+	/*
+	 * In case we trace inside arch_spin_lock() or after (NMI),
+	 * we will cause circular lock, so we also need to increase
+	 * the percpu trace_active here.
+	 */
+	cpu = smp_processor_id();
+	per_cpu(trace_active, cpu)++;
+
 	arch_spin_lock(&max_stack_lock);
 	*ptr = val;
 	arch_spin_unlock(&max_stack_lock);
+
+	per_cpu(trace_active, cpu)--;
 	local_irq_restore(flags);
 
 	return count;
@@ -206,7 +218,13 @@
 
 static void *t_start(struct seq_file *m, loff_t *pos)
 {
+	int cpu;
+
 	local_irq_disable();
+
+	cpu = smp_processor_id();
+	per_cpu(trace_active, cpu)++;
+
 	arch_spin_lock(&max_stack_lock);
 
 	if (*pos == 0)
@@ -217,7 +235,13 @@
 
 static void t_stop(struct seq_file *m, void *p)
 {
+	int cpu;
+
 	arch_spin_unlock(&max_stack_lock);
+
+	cpu = smp_processor_id();
+	per_cpu(trace_active, cpu)--;
+
 	local_irq_enable();
 }
 
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 7d2f0b3..ba8b670 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -587,7 +587,7 @@
 	return count;
 }
 
-const struct file_operations filter_fops = {
+static const struct file_operations filter_fops = {
 	.read  = filter_read,
 	.write = filter_write,
 };
diff --git a/lib/idr.c b/lib/idr.c
index 1cac726..0dc7822 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -156,10 +156,12 @@
 			id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1;
 
 			/* if already at the top layer, we need to grow */
-			if (!(p = pa[l])) {
+			if (id >= 1 << (idp->layers * IDR_BITS)) {
 				*starting_id = id;
 				return IDR_NEED_TO_GROW;
 			}
+			p = pa[l];
+			BUG_ON(!p);
 
 			/* If we need to go up one layer, continue the
 			 * loop; otherwise, restart from the top.
diff --git a/lib/string.c b/lib/string.c
index 9f75b4e..a1cdcfcc 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -667,7 +667,7 @@
  */
 char *strstr(const char *s1, const char *s2)
 {
-	int l1, l2;
+	size_t l1, l2;
 
 	l2 = strlen(s2);
 	if (!l2)
@@ -684,6 +684,31 @@
 EXPORT_SYMBOL(strstr);
 #endif
 
+#ifndef __HAVE_ARCH_STRNSTR
+/**
+ * strnstr - Find the first substring in a length-limited string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ * @len: the maximum number of characters to search
+ */
+char *strnstr(const char *s1, const char *s2, size_t len)
+{
+	size_t l1 = len, l2;
+
+	l2 = strlen(s2);
+	if (!l2)
+		return (char *)s1;
+	while (l1 >= l2) {
+		l1--;
+		if (!memcmp(s1, s2, l2))
+			return (char *)s1;
+		s1++;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(strnstr);
+#endif
+
 #ifndef __HAVE_ARCH_MEMCHR
 /**
  * memchr - Find a character in an area of memory.
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
index 05e1559..215447c 100644
--- a/lib/zlib_inflate/inffast.c
+++ b/lib/zlib_inflate/inffast.c
@@ -4,12 +4,25 @@
  */
 
 #include <linux/zutil.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
 #include "inftrees.h"
 #include "inflate.h"
 #include "inffast.h"
 
+/* Only do the unaligned "Faster" variant when
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set
+ *
+ * On powerpc, it won't be as we don't include autoconf.h
+ * automatically for the boot wrapper, which is intended as
+ * we run in an environment where we may not be able to deal
+ * with (even rare) alignment faults. In addition, we do not
+ * define __KERNEL__ for arch/powerpc/boot unlike x86
+ */
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#endif
+
 #ifndef ASMINF
 
 /* Allow machine dependent optimization for post-increment or pre-increment.
@@ -243,6 +256,7 @@
                     }
                 }
                 else {
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 		    unsigned short *sout;
 		    unsigned long loops;
 
@@ -284,6 +298,20 @@
 		    }
 		    if (len & 1)
 			PUP(out) = PUP(from);
+#else /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+			 PUP(out) = PUP(from);
+			 PUP(out) = PUP(from);
+			 PUP(out) = PUP(from);
+			 len -= 3;
+                    } while (len > 2);
+                    if (len) {
+			 PUP(out) = PUP(from);
+			 if (len > 1)
+			     PUP(out) = PUP(from);
+                    }
+#endif /* !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
                 }
             }
             else if ((op & 64) == 0) {          /* 2nd level distance code */
diff --git a/mm/filemap.c b/mm/filemap.c
index 96ac6b0..698ea80 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1634,14 +1634,15 @@
 static struct page *__read_cache_page(struct address_space *mapping,
 				pgoff_t index,
 				int (*filler)(void *,struct page*),
-				void *data)
+				void *data,
+				gfp_t gfp)
 {
 	struct page *page;
 	int err;
 repeat:
 	page = find_get_page(mapping, index);
 	if (!page) {
-		page = page_cache_alloc_cold(mapping);
+		page = __page_cache_alloc(gfp | __GFP_COLD);
 		if (!page)
 			return ERR_PTR(-ENOMEM);
 		err = add_to_page_cache_lru(page, mapping, index, GFP_KERNEL);
@@ -1661,31 +1662,18 @@
 	return page;
 }
 
-/**
- * read_cache_page_async - read into page cache, fill it if needed
- * @mapping:	the page's address_space
- * @index:	the page index
- * @filler:	function to perform the read
- * @data:	destination for read data
- *
- * Same as read_cache_page, but don't wait for page to become unlocked
- * after submitting it to the filler.
- *
- * Read into the page cache. If a page already exists, and PageUptodate() is
- * not set, try to fill the page but don't wait for it to become unlocked.
- *
- * If the page does not get brought uptodate, return -EIO.
- */
-struct page *read_cache_page_async(struct address_space *mapping,
+static struct page *do_read_cache_page(struct address_space *mapping,
 				pgoff_t index,
 				int (*filler)(void *,struct page*),
-				void *data)
+				void *data,
+				gfp_t gfp)
+
 {
 	struct page *page;
 	int err;
 
 retry:
-	page = __read_cache_page(mapping, index, filler, data);
+	page = __read_cache_page(mapping, index, filler, data, gfp);
 	if (IS_ERR(page))
 		return page;
 	if (PageUptodate(page))
@@ -1710,8 +1698,67 @@
 	mark_page_accessed(page);
 	return page;
 }
+
+/**
+ * read_cache_page_async - read into page cache, fill it if needed
+ * @mapping:	the page's address_space
+ * @index:	the page index
+ * @filler:	function to perform the read
+ * @data:	destination for read data
+ *
+ * Same as read_cache_page, but don't wait for page to become unlocked
+ * after submitting it to the filler.
+ *
+ * Read into the page cache. If a page already exists, and PageUptodate() is
+ * not set, try to fill the page but don't wait for it to become unlocked.
+ *
+ * If the page does not get brought uptodate, return -EIO.
+ */
+struct page *read_cache_page_async(struct address_space *mapping,
+				pgoff_t index,
+				int (*filler)(void *,struct page*),
+				void *data)
+{
+	return do_read_cache_page(mapping, index, filler, data, mapping_gfp_mask(mapping));
+}
 EXPORT_SYMBOL(read_cache_page_async);
 
+static struct page *wait_on_page_read(struct page *page)
+{
+	if (!IS_ERR(page)) {
+		wait_on_page_locked(page);
+		if (!PageUptodate(page)) {
+			page_cache_release(page);
+			page = ERR_PTR(-EIO);
+		}
+	}
+	return page;
+}
+
+/**
+ * read_cache_page_gfp - read into page cache, using specified page allocation flags.
+ * @mapping:	the page's address_space
+ * @index:	the page index
+ * @gfp:	the page allocator flags to use if allocating
+ *
+ * This is the same as "read_mapping_page(mapping, index, NULL)", but with
+ * any new page allocations done using the specified allocation flags. Note
+ * that the Radix tree operations will still use GFP_KERNEL, so you can't
+ * expect to do this atomically or anything like that - but you can pass in
+ * other page requirements.
+ *
+ * If the page does not get brought uptodate, return -EIO.
+ */
+struct page *read_cache_page_gfp(struct address_space *mapping,
+				pgoff_t index,
+				gfp_t gfp)
+{
+	filler_t *filler = (filler_t *)mapping->a_ops->readpage;
+
+	return wait_on_page_read(do_read_cache_page(mapping, index, filler, NULL, gfp));
+}
+EXPORT_SYMBOL(read_cache_page_gfp);
+
 /**
  * read_cache_page - read into page cache, fill it if needed
  * @mapping:	the page's address_space
@@ -1729,18 +1776,7 @@
 				int (*filler)(void *,struct page*),
 				void *data)
 {
-	struct page *page;
-
-	page = read_cache_page_async(mapping, index, filler, data);
-	if (IS_ERR(page))
-		goto out;
-	wait_on_page_locked(page);
-	if (!PageUptodate(page)) {
-		page_cache_release(page);
-		page = ERR_PTR(-EIO);
-	}
- out:
-	return page;
+	return wait_on_page_read(read_cache_page_async(mapping, index, filler, data));
 }
 EXPORT_SYMBOL(read_cache_page);
 
@@ -2196,6 +2232,9 @@
 		if (unlikely(status))
 			break;
 
+		if (mapping_writably_mapped(mapping))
+			flush_dcache_page(page);
+
 		pagefault_disable();
 		copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes);
 		pagefault_enable();
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index e91b81b..2d16fa6 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1515,10 +1515,9 @@
 	.attrs = hstate_attrs,
 };
 
-static int __init hugetlb_sysfs_add_hstate(struct hstate *h,
-				struct kobject *parent,
-				struct kobject **hstate_kobjs,
-				struct attribute_group *hstate_attr_group)
+static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent,
+				    struct kobject **hstate_kobjs,
+				    struct attribute_group *hstate_attr_group)
 {
 	int retval;
 	int hi = h - hstates;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 488b644..954032b 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2586,7 +2586,7 @@
 	if (free_all)
 		goto try_to_free;
 move_account:
-	while (mem->res.usage > 0) {
+	do {
 		ret = -EBUSY;
 		if (cgroup_task_count(cgrp) || !list_empty(&cgrp->children))
 			goto out;
@@ -2614,8 +2614,8 @@
 		if (ret == -ENOMEM)
 			goto try_to_free;
 		cond_resched();
-	}
-	ret = 0;
+	/* "ret" should also be checked to ensure all lists are empty. */
+	} while (mem->res.usage > 0 || ret);
 out:
 	css_put(&mem->css);
 	return ret;
@@ -2648,10 +2648,7 @@
 	}
 	lru_add_drain();
 	/* try move_account...there may be some *locked* pages. */
-	if (mem->res.usage)
-		goto move_account;
-	ret = 0;
-	goto out;
+	goto move_account;
 }
 
 int mem_cgroup_force_empty_write(struct cgroup *cont, unsigned int event)
diff --git a/mm/migrate.c b/mm/migrate.c
index efddbf0..880bd59 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -912,6 +912,9 @@
 				goto out_pm;
 
 			err = -ENODEV;
+			if (node < 0 || node >= MAX_NUMNODES)
+				goto out_pm;
+
 			if (!node_state(node, N_HIGH_MEMORY))
 				goto out_pm;
 
@@ -999,33 +1002,27 @@
 #define DO_PAGES_STAT_CHUNK_NR 16
 	const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
 	int chunk_status[DO_PAGES_STAT_CHUNK_NR];
-	unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR;
-	int err;
 
-	for (i = 0; i < nr_pages; i += chunk_nr) {
-		if (chunk_nr > nr_pages - i)
-			chunk_nr = nr_pages - i;
+	while (nr_pages) {
+		unsigned long chunk_nr;
 
-		err = copy_from_user(chunk_pages, &pages[i],
-				     chunk_nr * sizeof(*chunk_pages));
-		if (err) {
-			err = -EFAULT;
-			goto out;
-		}
+		chunk_nr = nr_pages;
+		if (chunk_nr > DO_PAGES_STAT_CHUNK_NR)
+			chunk_nr = DO_PAGES_STAT_CHUNK_NR;
+
+		if (copy_from_user(chunk_pages, pages, chunk_nr * sizeof(*chunk_pages)))
+			break;
 
 		do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
 
-		err = copy_to_user(&status[i], chunk_status,
-				   chunk_nr * sizeof(*chunk_status));
-		if (err) {
-			err = -EFAULT;
-			goto out;
-		}
-	}
-	err = 0;
+		if (copy_to_user(status, chunk_status, chunk_nr * sizeof(*status)))
+			break;
 
-out:
-	return err;
+		pages += chunk_nr;
+		status += chunk_nr;
+		nr_pages -= chunk_nr;
+	}
+	return nr_pages ? -EFAULT : 0;
 }
 
 /*
diff --git a/mm/nommu.c b/mm/nommu.c
index 1777386..48a2ecf 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -552,11 +552,11 @@
 static void __put_nommu_region(struct vm_region *region)
 	__releases(nommu_region_sem)
 {
-	kenter("%p{%d}", region, atomic_read(&region->vm_usage));
+	kenter("%p{%d}", region, region->vm_usage);
 
 	BUG_ON(!nommu_region_tree.rb_node);
 
-	if (atomic_dec_and_test(&region->vm_usage)) {
+	if (--region->vm_usage == 0) {
 		if (region->vm_top > region->vm_start)
 			delete_nommu_region(region);
 		up_write(&nommu_region_sem);
@@ -1205,7 +1205,7 @@
 	if (!vma)
 		goto error_getting_vma;
 
-	atomic_set(&region->vm_usage, 1);
+	region->vm_usage = 1;
 	region->vm_flags = vm_flags;
 	region->vm_pgoff = pgoff;
 
@@ -1272,7 +1272,7 @@
 			}
 
 			/* we've found a region we can share */
-			atomic_inc(&pregion->vm_usage);
+			pregion->vm_usage++;
 			vma->vm_region = pregion;
 			start = pregion->vm_start;
 			start += (pgoff - pregion->vm_pgoff) << PAGE_SHIFT;
@@ -1289,7 +1289,7 @@
 					vma->vm_region = NULL;
 					vma->vm_start = 0;
 					vma->vm_end = 0;
-					atomic_dec(&pregion->vm_usage);
+					pregion->vm_usage--;
 					pregion = NULL;
 					goto error_just_free;
 				}
@@ -1441,10 +1441,9 @@
 
 	kenter("");
 
-	/* we're only permitted to split anonymous regions that have a single
-	 * owner */
-	if (vma->vm_file ||
-	    atomic_read(&vma->vm_region->vm_usage) != 1)
+	/* we're only permitted to split anonymous regions (these should have
+	 * only a single usage on the region) */
+	if (vma->vm_file)
 		return -ENOMEM;
 
 	if (mm->map_count >= sysctl_max_map_count)
@@ -1518,7 +1517,7 @@
 
 	/* cut the backing region down to size */
 	region = vma->vm_region;
-	BUG_ON(atomic_read(&region->vm_usage) != 1);
+	BUG_ON(region->vm_usage != 1);
 
 	down_write(&nommu_region_sem);
 	delete_nommu_region(region);
@@ -1762,27 +1761,6 @@
 EXPORT_SYMBOL(unmap_mapping_range);
 
 /*
- * ask for an unmapped area at which to create a mapping on a file
- */
-unsigned long get_unmapped_area(struct file *file, unsigned long addr,
-				unsigned long len, unsigned long pgoff,
-				unsigned long flags)
-{
-	unsigned long (*get_area)(struct file *, unsigned long, unsigned long,
-				  unsigned long, unsigned long);
-
-	get_area = current->mm->get_unmapped_area;
-	if (file && file->f_op && file->f_op->get_unmapped_area)
-		get_area = file->f_op->get_unmapped_area;
-
-	if (!get_area)
-		return -ENOSYS;
-
-	return get_area(file, addr, len, pgoff, flags);
-}
-EXPORT_SYMBOL(get_unmapped_area);
-
-/*
  * Check that a process has enough memory to allocate a new virtual
  * mapping. 0 means there is enough memory for the allocation to
  * succeed and -ENOMEM implies there is not.
@@ -1936,3 +1914,65 @@
 	mmput(mm);
 	return len;
 }
+
+/**
+ * nommu_shrink_inode_mappings - Shrink the shared mappings on an inode
+ * @inode: The inode to check
+ * @size: The current filesize of the inode
+ * @newsize: The proposed filesize of the inode
+ *
+ * Check the shared mappings on an inode on behalf of a shrinking truncate to
+ * make sure that that any outstanding VMAs aren't broken and then shrink the
+ * vm_regions that extend that beyond so that do_mmap_pgoff() doesn't
+ * automatically grant mappings that are too large.
+ */
+int nommu_shrink_inode_mappings(struct inode *inode, size_t size,
+				size_t newsize)
+{
+	struct vm_area_struct *vma;
+	struct prio_tree_iter iter;
+	struct vm_region *region;
+	pgoff_t low, high;
+	size_t r_size, r_top;
+
+	low = newsize >> PAGE_SHIFT;
+	high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+	down_write(&nommu_region_sem);
+
+	/* search for VMAs that fall within the dead zone */
+	vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+			      low, high) {
+		/* found one - only interested if it's shared out of the page
+		 * cache */
+		if (vma->vm_flags & VM_SHARED) {
+			up_write(&nommu_region_sem);
+			return -ETXTBSY; /* not quite true, but near enough */
+		}
+	}
+
+	/* reduce any regions that overlap the dead zone - if in existence,
+	 * these will be pointed to by VMAs that don't overlap the dead zone
+	 *
+	 * we don't check for any regions that start beyond the EOF as there
+	 * shouldn't be any
+	 */
+	vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
+			      0, ULONG_MAX) {
+		if (!(vma->vm_flags & VM_SHARED))
+			continue;
+
+		region = vma->vm_region;
+		r_size = region->vm_top - region->vm_start;
+		r_top = (region->vm_pgoff << PAGE_SHIFT) + r_size;
+
+		if (r_top > newsize) {
+			region->vm_top -= r_top - newsize;
+			if (region->vm_end > region->vm_top)
+				region->vm_end = region->vm_top;
+		}
+	}
+
+	up_write(&nommu_region_sem);
+	return 0;
+}
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index f52481b..2370504 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -459,6 +459,8 @@
 	list_for_each_entry(c, &p->children, sibling) {
 		if (c->mm == p->mm)
 			continue;
+		if (mem && !task_in_mem_cgroup(c, mem))
+			continue;
 		if (!oom_kill_task(c))
 			return 0;
 	}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4e9f5cc..8deb9d0 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -556,8 +556,9 @@
 			page = list_entry(list->prev, struct page, lru);
 			/* must delete as __free_one_page list manipulates */
 			list_del(&page->lru);
-			__free_one_page(page, zone, 0, migratetype);
-			trace_mm_page_pcpu_drain(page, 0, migratetype);
+			/* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
+			__free_one_page(page, zone, 0, page_private(page));
+			trace_mm_page_pcpu_drain(page, 0, page_private(page));
 		} while (--count && --batch_free && !list_empty(list));
 	}
 	spin_unlock(&zone->lock);
@@ -1222,10 +1223,10 @@
 		}
 		spin_lock_irqsave(&zone->lock, flags);
 		page = __rmqueue(zone, order, migratetype);
-		__mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
 		spin_unlock(&zone->lock);
 		if (!page)
 			goto failed;
+		__mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << order));
 	}
 
 	__count_zone_vm_events(PGALLOC, zone, 1 << order);
@@ -3998,7 +3999,7 @@
 		}
 
 		/* Merge backward if suitable */
-		if (start_pfn < early_node_map[i].end_pfn &&
+		if (start_pfn < early_node_map[i].start_pfn &&
 				end_pfn >= early_node_map[i].start_pfn) {
 			early_node_map[i].start_pfn = start_pfn;
 			return;
diff --git a/mm/truncate.c b/mm/truncate.c
index 342deee..e87e372 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -522,22 +522,20 @@
  */
 void truncate_pagecache(struct inode *inode, loff_t old, loff_t new)
 {
-	if (new < old) {
-		struct address_space *mapping = inode->i_mapping;
+	struct address_space *mapping = inode->i_mapping;
 
-		/*
-		 * unmap_mapping_range is called twice, first simply for
-		 * efficiency so that truncate_inode_pages does fewer
-		 * single-page unmaps.  However after this first call, and
-		 * before truncate_inode_pages finishes, it is possible for
-		 * private pages to be COWed, which remain after
-		 * truncate_inode_pages finishes, hence the second
-		 * unmap_mapping_range call must be made for correctness.
-		 */
-		unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
-		truncate_inode_pages(mapping, new);
-		unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
-	}
+	/*
+	 * unmap_mapping_range is called twice, first simply for
+	 * efficiency so that truncate_inode_pages does fewer
+	 * single-page unmaps.  However after this first call, and
+	 * before truncate_inode_pages finishes, it is possible for
+	 * private pages to be COWed, which remain after
+	 * truncate_inode_pages finishes, hence the second
+	 * unmap_mapping_range call must be made for correctness.
+	 */
+	unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+	truncate_inode_pages(mapping, new);
+	unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
 }
 EXPORT_SYMBOL(truncate_pagecache);
 
diff --git a/mm/util.c b/mm/util.c
index 7c35ad9..834db7b 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -220,7 +220,7 @@
 }
 EXPORT_SYMBOL(strndup_user);
 
-#ifndef HAVE_ARCH_PICK_MMAP_LAYOUT
+#if defined(CONFIG_MMU) && !defined(HAVE_ARCH_PICK_MMAP_LAYOUT)
 void arch_pick_mmap_layout(struct mm_struct *mm)
 {
 	mm->mmap_base = TASK_UNMAPPED_BASE;
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 37e6929..ae00746 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -509,6 +509,9 @@
 
 static atomic_t vmap_lazy_nr = ATOMIC_INIT(0);
 
+/* for per-CPU blocks */
+static void purge_fragmented_blocks_allcpus(void);
+
 /*
  * Purges all lazily-freed vmap areas.
  *
@@ -539,6 +542,9 @@
 	} else
 		spin_lock(&purge_lock);
 
+	if (sync)
+		purge_fragmented_blocks_allcpus();
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(va, &vmap_area_list, list) {
 		if (va->flags & VM_LAZY_FREE) {
@@ -555,10 +561,8 @@
 	}
 	rcu_read_unlock();
 
-	if (nr) {
-		BUG_ON(nr > atomic_read(&vmap_lazy_nr));
+	if (nr)
 		atomic_sub(nr, &vmap_lazy_nr);
-	}
 
 	if (nr || force_flush)
 		flush_tlb_kernel_range(*start, *end);
@@ -669,8 +673,6 @@
 struct vmap_block_queue {
 	spinlock_t lock;
 	struct list_head free;
-	struct list_head dirty;
-	unsigned int nr_dirty;
 };
 
 struct vmap_block {
@@ -680,10 +682,9 @@
 	unsigned long free, dirty;
 	DECLARE_BITMAP(alloc_map, VMAP_BBMAP_BITS);
 	DECLARE_BITMAP(dirty_map, VMAP_BBMAP_BITS);
-	union {
-		struct list_head free_list;
-		struct rcu_head rcu_head;
-	};
+	struct list_head free_list;
+	struct rcu_head rcu_head;
+	struct list_head purge;
 };
 
 /* Queue of free and dirty vmap blocks, for allocation and flushing purposes */
@@ -759,7 +760,7 @@
 	vbq = &get_cpu_var(vmap_block_queue);
 	vb->vbq = vbq;
 	spin_lock(&vbq->lock);
-	list_add(&vb->free_list, &vbq->free);
+	list_add_rcu(&vb->free_list, &vbq->free);
 	spin_unlock(&vbq->lock);
 	put_cpu_var(vmap_block_queue);
 
@@ -778,8 +779,6 @@
 	struct vmap_block *tmp;
 	unsigned long vb_idx;
 
-	BUG_ON(!list_empty(&vb->free_list));
-
 	vb_idx = addr_to_vb_idx(vb->va->va_start);
 	spin_lock(&vmap_block_tree_lock);
 	tmp = radix_tree_delete(&vmap_block_tree, vb_idx);
@@ -790,12 +789,61 @@
 	call_rcu(&vb->rcu_head, rcu_free_vb);
 }
 
+static void purge_fragmented_blocks(int cpu)
+{
+	LIST_HEAD(purge);
+	struct vmap_block *vb;
+	struct vmap_block *n_vb;
+	struct vmap_block_queue *vbq = &per_cpu(vmap_block_queue, cpu);
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(vb, &vbq->free, free_list) {
+
+		if (!(vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS))
+			continue;
+
+		spin_lock(&vb->lock);
+		if (vb->free + vb->dirty == VMAP_BBMAP_BITS && vb->dirty != VMAP_BBMAP_BITS) {
+			vb->free = 0; /* prevent further allocs after releasing lock */
+			vb->dirty = VMAP_BBMAP_BITS; /* prevent purging it again */
+			bitmap_fill(vb->alloc_map, VMAP_BBMAP_BITS);
+			bitmap_fill(vb->dirty_map, VMAP_BBMAP_BITS);
+			spin_lock(&vbq->lock);
+			list_del_rcu(&vb->free_list);
+			spin_unlock(&vbq->lock);
+			spin_unlock(&vb->lock);
+			list_add_tail(&vb->purge, &purge);
+		} else
+			spin_unlock(&vb->lock);
+	}
+	rcu_read_unlock();
+
+	list_for_each_entry_safe(vb, n_vb, &purge, purge) {
+		list_del(&vb->purge);
+		free_vmap_block(vb);
+	}
+}
+
+static void purge_fragmented_blocks_thiscpu(void)
+{
+	purge_fragmented_blocks(smp_processor_id());
+}
+
+static void purge_fragmented_blocks_allcpus(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		purge_fragmented_blocks(cpu);
+}
+
 static void *vb_alloc(unsigned long size, gfp_t gfp_mask)
 {
 	struct vmap_block_queue *vbq;
 	struct vmap_block *vb;
 	unsigned long addr = 0;
 	unsigned int order;
+	int purge = 0;
 
 	BUG_ON(size & ~PAGE_MASK);
 	BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
@@ -808,24 +856,38 @@
 		int i;
 
 		spin_lock(&vb->lock);
+		if (vb->free < 1UL << order)
+			goto next;
+
 		i = bitmap_find_free_region(vb->alloc_map,
 						VMAP_BBMAP_BITS, order);
 
-		if (i >= 0) {
-			addr = vb->va->va_start + (i << PAGE_SHIFT);
-			BUG_ON(addr_to_vb_idx(addr) !=
-					addr_to_vb_idx(vb->va->va_start));
-			vb->free -= 1UL << order;
-			if (vb->free == 0) {
-				spin_lock(&vbq->lock);
-				list_del_init(&vb->free_list);
-				spin_unlock(&vbq->lock);
+		if (i < 0) {
+			if (vb->free + vb->dirty == VMAP_BBMAP_BITS) {
+				/* fragmented and no outstanding allocations */
+				BUG_ON(vb->dirty != VMAP_BBMAP_BITS);
+				purge = 1;
 			}
-			spin_unlock(&vb->lock);
-			break;
+			goto next;
+		}
+		addr = vb->va->va_start + (i << PAGE_SHIFT);
+		BUG_ON(addr_to_vb_idx(addr) !=
+				addr_to_vb_idx(vb->va->va_start));
+		vb->free -= 1UL << order;
+		if (vb->free == 0) {
+			spin_lock(&vbq->lock);
+			list_del_rcu(&vb->free_list);
+			spin_unlock(&vbq->lock);
 		}
 		spin_unlock(&vb->lock);
+		break;
+next:
+		spin_unlock(&vb->lock);
 	}
+
+	if (purge)
+		purge_fragmented_blocks_thiscpu();
+
 	put_cpu_var(vmap_block_queue);
 	rcu_read_unlock();
 
@@ -862,11 +924,11 @@
 	BUG_ON(!vb);
 
 	spin_lock(&vb->lock);
-	bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order);
+	BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order));
 
 	vb->dirty += 1UL << order;
 	if (vb->dirty == VMAP_BBMAP_BITS) {
-		BUG_ON(vb->free || !list_empty(&vb->free_list));
+		BUG_ON(vb->free);
 		spin_unlock(&vb->lock);
 		free_vmap_block(vb);
 	} else
@@ -1035,8 +1097,6 @@
 		vbq = &per_cpu(vmap_block_queue, i);
 		spin_lock_init(&vbq->lock);
 		INIT_LIST_HEAD(&vbq->free);
-		INIT_LIST_HEAD(&vbq->dirty);
-		vbq->nr_dirty = 0;
 	}
 
 	/* Import existing vmlist entries. */
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 885207a..c26986c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1922,6 +1922,9 @@
 		if (!populated_zone(zone))
 			continue;
 
+		if (zone_is_all_unreclaimable(zone))
+			continue;
+
 		if (!zone_watermark_ok(zone, order, high_wmark_pages(zone),
 								0, 0))
 			return 1;
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b788978..c1b92ca 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -163,7 +163,7 @@
 		goto err_unlock;
 	}
 
-	rx_stats = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats,
+	rx_stats = per_cpu_ptr(vlan_dev_info(skb->dev)->vlan_rx_stats,
 			       smp_processor_id());
 	rx_stats->rx_packets++;
 	rx_stats->rx_bytes += skb->len;
diff --git a/net/9p/client.c b/net/9p/client.c
index 8af95b2..09d4f1e2 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -69,7 +69,7 @@
 
 static int parse_opts(char *opts, struct p9_client *clnt)
 {
-	char *options;
+	char *options, *tmp_options;
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	int option;
@@ -81,12 +81,13 @@
 	if (!opts)
 		return 0;
 
-	options = kstrdup(opts, GFP_KERNEL);
-	if (!options) {
+	tmp_options = kstrdup(opts, GFP_KERNEL);
+	if (!tmp_options) {
 		P9_DPRINTK(P9_DEBUG_ERROR,
 				"failed to allocate copy of option string\n");
 		return -ENOMEM;
 	}
+	options = tmp_options;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -108,6 +109,13 @@
 			break;
 		case Opt_trans:
 			clnt->trans_mod = v9fs_get_trans_by_name(&args[0]);
+			if(clnt->trans_mod == NULL) {
+				P9_DPRINTK(P9_DEBUG_ERROR,
+				   "Could not find request transport: %s\n",
+				   (char *) &args[0]);
+				ret = -EINVAL;
+				goto free_and_return;
+			}
 			break;
 		case Opt_legacy:
 			clnt->dotu = 0;
@@ -117,7 +125,8 @@
 		}
 	}
 
-	kfree(options);
+free_and_return:
+	kfree(tmp_options);
 	return ret;
 }
 
@@ -667,18 +676,12 @@
 	clnt->trans = NULL;
 	spin_lock_init(&clnt->lock);
 	INIT_LIST_HEAD(&clnt->fidlist);
-	clnt->fidpool = p9_idpool_create();
-	if (IS_ERR(clnt->fidpool)) {
-		err = PTR_ERR(clnt->fidpool);
-		clnt->fidpool = NULL;
-		goto error;
-	}
 
 	p9_tag_init(clnt);
 
 	err = parse_opts(options, clnt);
 	if (err < 0)
-		goto error;
+		goto free_client;
 
 	if (!clnt->trans_mod)
 		clnt->trans_mod = v9fs_get_default_trans();
@@ -687,7 +690,14 @@
 		err = -EPROTONOSUPPORT;
 		P9_DPRINTK(P9_DEBUG_ERROR,
 				"No transport defined or default transport\n");
-		goto error;
+		goto free_client;
+	}
+
+	clnt->fidpool = p9_idpool_create();
+	if (IS_ERR(clnt->fidpool)) {
+		err = PTR_ERR(clnt->fidpool);
+		clnt->fidpool = NULL;
+		goto put_trans;
 	}
 
 	P9_DPRINTK(P9_DEBUG_MUX, "clnt %p trans %p msize %d dotu %d\n",
@@ -695,19 +705,25 @@
 
 	err = clnt->trans_mod->create(clnt, dev_name, options);
 	if (err)
-		goto error;
+		goto destroy_fidpool;
 
 	if ((clnt->msize+P9_IOHDRSZ) > clnt->trans_mod->maxsize)
 		clnt->msize = clnt->trans_mod->maxsize-P9_IOHDRSZ;
 
 	err = p9_client_version(clnt);
 	if (err)
-		goto error;
+		goto close_trans;
 
 	return clnt;
 
-error:
-	p9_client_destroy(clnt);
+close_trans:
+	clnt->trans_mod->close(clnt);
+destroy_fidpool:
+	p9_idpool_destroy(clnt->fidpool);
+put_trans:
+	v9fs_put_trans(clnt->trans_mod);
+free_client:
+	kfree(clnt);
 	return ERR_PTR(err);
 }
 EXPORT_SYMBOL(p9_client_create);
@@ -1214,10 +1230,11 @@
 {
 	int ret;
 
+	/* NOTE: size shouldn't include its own length */
 	/* size[2] type[2] dev[4] qid[13] */
 	/* mode[4] atime[4] mtime[4] length[8]*/
 	/* name[s] uid[s] gid[s] muid[s] */
-	ret = 2+2+4+13+4+4+4+8+2+2+2+2;
+	ret = 2+4+13+4+4+4+8+2+2+2+2;
 
 	if (wst->name)
 		ret += strlen(wst->name);
@@ -1258,7 +1275,7 @@
 		wst->name, wst->uid, wst->gid, wst->muid, wst->extension,
 		wst->n_uid, wst->n_gid, wst->n_muid);
 
-	req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst);
+	req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size+2, wst);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
 		goto error;
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index be1cb90..31d0b05 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -714,7 +714,7 @@
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	int option;
-	char *options;
+	char *options, *tmp_options;
 	int ret;
 
 	opts->port = P9_PORT;
@@ -724,12 +724,13 @@
 	if (!params)
 		return 0;
 
-	options = kstrdup(params, GFP_KERNEL);
-	if (!options) {
+	tmp_options = kstrdup(params, GFP_KERNEL);
+	if (!tmp_options) {
 		P9_DPRINTK(P9_DEBUG_ERROR,
 				"failed to allocate copy of option string\n");
 		return -ENOMEM;
 	}
+	options = tmp_options;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -760,7 +761,8 @@
 			continue;
 		}
 	}
-	kfree(options);
+
+	kfree(tmp_options);
 	return 0;
 }
 
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 65cb29d..2c95a89 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -166,7 +166,7 @@
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
 	int option;
-	char *options;
+	char *options, *tmp_options;
 	int ret;
 
 	opts->port = P9_PORT;
@@ -177,12 +177,13 @@
 	if (!params)
 		return 0;
 
-	options = kstrdup(params, GFP_KERNEL);
-	if (!options) {
+	tmp_options = kstrdup(params, GFP_KERNEL);
+	if (!tmp_options) {
 		P9_DPRINTK(P9_DEBUG_ERROR,
 			   "failed to allocate copy of option string\n");
 		return -ENOMEM;
 	}
+	options = tmp_options;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -216,7 +217,7 @@
 	}
 	/* RQ must be at least as large as the SQ */
 	opts->rq_depth = max(opts->rq_depth, opts->sq_depth);
-	kfree(options);
+	kfree(tmp_options);
 	return 0;
 }
 
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index ea1e3da..cb50f4a 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -102,7 +102,8 @@
 	struct virtio_chan *chan = client->trans;
 
 	mutex_lock(&virtio_9p_lock);
-	chan->inuse = false;
+	if (chan)
+		chan->inuse = false;
 	mutex_unlock(&virtio_9p_lock);
 }
 
@@ -311,6 +312,7 @@
 	}
 
 	client->trans = (void *)chan;
+	client->status = Connected;
 	chan->client = client;
 
 	return 0;
diff --git a/net/appletalk/aarp.c b/net/appletalk/aarp.c
index 9d4adfd..f2b3b56 100644
--- a/net/appletalk/aarp.c
+++ b/net/appletalk/aarp.c
@@ -819,7 +819,7 @@
 				ma = &ifa->address;
 			else { /* We need to make a copy of the entry. */
 				da.s_node = sa.s_node;
-				da.s_net = da.s_net;
+				da.s_net = sa.s_net;
 				ma = &da;
 			}
 
diff --git a/net/ax25/ax25_out.c b/net/ax25/ax25_out.c
index bf706f8..1491260 100644
--- a/net/ax25/ax25_out.c
+++ b/net/ax25/ax25_out.c
@@ -92,6 +92,12 @@
 #endif
 	}
 
+	/*
+	 * There is one ref for the state machine; a caller needs
+	 * one more to put it back, just like with the existing one.
+	 */
+	ax25_cb_hold(ax25);
+
 	ax25_cb_add(ax25);
 
 	ax25->state = AX25_STATE_1;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index b7c4224..b10e3cd 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -377,6 +377,9 @@
 
 	if (acl->state == BT_CONNECTED &&
 			(sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
+		acl->power_save = 1;
+		hci_conn_enter_active_mode(acl);
+
 		if (lmp_esco_capable(hdev))
 			hci_setup_sync(sco, acl->handle);
 		else
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 28517ba..592da5c 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1699,6 +1699,7 @@
 		break;
 
 	case 0x1c:	/* SCO interval rejected */
+	case 0x1a:	/* Unsupported Remote Feature */
 	case 0x1f:	/* Unspecified error */
 		if (conn->out && conn->attempt < 2) {
 			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 18e7f5a..fc6ec1e 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -243,6 +243,39 @@
 	input_sync(dev);
 }
 
+static int __hidp_send_ctrl_message(struct hidp_session *session,
+			unsigned char hdr, unsigned char *data, int size)
+{
+	struct sk_buff *skb;
+
+	BT_DBG("session %p data %p size %d", session, data, size);
+
+	if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) {
+		BT_ERR("Can't allocate memory for new frame");
+		return -ENOMEM;
+	}
+
+	*skb_put(skb, 1) = hdr;
+	if (data && size > 0)
+		memcpy(skb_put(skb, size), data, size);
+
+	skb_queue_tail(&session->ctrl_transmit, skb);
+
+	return 0;
+}
+
+static inline int hidp_send_ctrl_message(struct hidp_session *session,
+			unsigned char hdr, unsigned char *data, int size)
+{
+	int err;
+
+	err = __hidp_send_ctrl_message(session, hdr, data, size);
+
+	hidp_schedule(session);
+
+	return err;
+}
+
 static int hidp_queue_report(struct hidp_session *session,
 				unsigned char *data, int size)
 {
@@ -282,7 +315,9 @@
 
 static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
 {
-	if (hidp_queue_report(hid->driver_data, data, count))
+	if (hidp_send_ctrl_message(hid->driver_data,
+			HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE,
+			data, count))
 		return -ENOMEM;
 	return count;
 }
@@ -307,39 +342,6 @@
 		del_timer(&session->timer);
 }
 
-static int __hidp_send_ctrl_message(struct hidp_session *session,
-			unsigned char hdr, unsigned char *data, int size)
-{
-	struct sk_buff *skb;
-
-	BT_DBG("session %p data %p size %d", session, data, size);
-
-	if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) {
-		BT_ERR("Can't allocate memory for new frame");
-		return -ENOMEM;
-	}
-
-	*skb_put(skb, 1) = hdr;
-	if (data && size > 0)
-		memcpy(skb_put(skb, size), data, size);
-
-	skb_queue_tail(&session->ctrl_transmit, skb);
-
-	return 0;
-}
-
-static inline int hidp_send_ctrl_message(struct hidp_session *session,
-			unsigned char hdr, unsigned char *data, int size)
-{
-	int err;
-
-	err = __hidp_send_ctrl_message(session, hdr, data, size);
-
-	hidp_schedule(session);
-
-	return err;
-}
-
 static void hidp_process_handshake(struct hidp_session *session,
 					unsigned char param)
 {
@@ -701,29 +703,9 @@
 static int hidp_parse(struct hid_device *hid)
 {
 	struct hidp_session *session = hid->driver_data;
-	struct hidp_connadd_req *req = session->req;
-	unsigned char *buf;
-	int ret;
 
-	buf = kmalloc(req->rd_size, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	if (copy_from_user(buf, req->rd_data, req->rd_size)) {
-		kfree(buf);
-		return -EFAULT;
-	}
-
-	ret = hid_parse_report(session->hid, buf, req->rd_size);
-
-	kfree(buf);
-
-	if (ret)
-		return ret;
-
-	session->req = NULL;
-
-	return 0;
+	return hid_parse_report(session->hid, session->rd_data,
+			session->rd_size);
 }
 
 static int hidp_start(struct hid_device *hid)
@@ -768,12 +750,24 @@
 	bdaddr_t src, dst;
 	int err;
 
+	session->rd_data = kzalloc(req->rd_size, GFP_KERNEL);
+	if (!session->rd_data)
+		return -ENOMEM;
+
+	if (copy_from_user(session->rd_data, req->rd_data, req->rd_size)) {
+		err = -EFAULT;
+		goto fault;
+	}
+	session->rd_size = req->rd_size;
+
 	hid = hid_allocate_device();
-	if (IS_ERR(hid))
-		return PTR_ERR(hid);
+	if (IS_ERR(hid)) {
+		err = PTR_ERR(hid);
+		goto fault;
+	}
 
 	session->hid = hid;
-	session->req = req;
+
 	hid->driver_data = session;
 
 	baswap(&src, &bt_sk(session->ctrl_sock->sk)->src);
@@ -804,6 +798,10 @@
 	hid_destroy_device(hid);
 	session->hid = NULL;
 
+fault:
+	kfree(session->rd_data);
+	session->rd_data = NULL;
+
 	return err;
 }
 
@@ -898,6 +896,9 @@
 		session->hid = NULL;
 	}
 
+	kfree(session->rd_data);
+	session->rd_data = NULL;
+
 purge:
 	skb_queue_purge(&session->ctrl_transmit);
 	skb_queue_purge(&session->intr_transmit);
diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h
index faf3d74..a4e215d 100644
--- a/net/bluetooth/hidp/hidp.h
+++ b/net/bluetooth/hidp/hidp.h
@@ -154,7 +154,9 @@
 	struct sk_buff_head ctrl_transmit;
 	struct sk_buff_head intr_transmit;
 
-	struct hidp_connadd_req *req;
+	/* Report descriptor */
+	__u8 *rd_data;
+	uint rd_size;
 };
 
 static inline void hidp_schedule(struct hidp_session *session)
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 1120cf1..400efa2 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -1368,7 +1368,6 @@
 
 	while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) &&
 	       !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) {
-		tx_skb = skb_clone(skb, GFP_ATOMIC);
 
 		if (pi->remote_max_tx &&
 				bt_cb(skb)->retries == pi->remote_max_tx) {
@@ -1376,6 +1375,8 @@
 			break;
 		}
 
+		tx_skb = skb_clone(skb, GFP_ATOMIC);
+
 		bt_cb(skb)->retries++;
 
 		control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
@@ -3518,7 +3519,6 @@
 	struct l2cap_pinfo *pi;
 	u16 control, len;
 	u8 tx_seq;
-	int err;
 
 	sk = l2cap_get_chan_by_scid(&conn->chan_list, cid);
 	if (!sk) {
@@ -3570,13 +3570,11 @@
 			goto drop;
 
 		if (__is_iframe(control))
-			err = l2cap_data_channel_iframe(sk, control, skb);
+			l2cap_data_channel_iframe(sk, control, skb);
 		else
-			err = l2cap_data_channel_sframe(sk, control, skb);
+			l2cap_data_channel_sframe(sk, control, skb);
 
-		if (!err)
-			goto done;
-		break;
+		goto done;
 
 	case L2CAP_MODE_STREAMING:
 		control = get_unaligned_le16(skb->data);
@@ -3602,7 +3600,7 @@
 		else
 			pi->expected_tx_seq = tx_seq + 1;
 
-		err = l2cap_sar_reassembly_sdu(sk, skb, control);
+		l2cap_sar_reassembly_sdu(sk, skb, control);
 
 		goto done;
 
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index fc5ee32..89f4a59 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -252,7 +252,6 @@
 	BT_DBG("session %p state %ld", s, s->state);
 
 	set_bit(RFCOMM_TIMED_OUT, &s->flags);
-	rfcomm_session_put(s);
 	rfcomm_schedule(RFCOMM_SCHED_TIMEO);
 }
 
@@ -1151,7 +1150,11 @@
 			break;
 
 		case BT_DISCONN:
-			rfcomm_session_put(s);
+			/* When socket is closed and we are not RFCOMM
+			 * initiator rfcomm_process_rx already calls
+			 * rfcomm_session_put() */
+			if (s->sock->sk->sk_state != BT_CLOSED)
+				rfcomm_session_put(s);
 			break;
 		}
 	}
@@ -1920,6 +1923,7 @@
 		if (test_and_clear_bit(RFCOMM_TIMED_OUT, &s->flags)) {
 			s->state = BT_DISCONN;
 			rfcomm_send_disc(s, 0);
+			rfcomm_session_put(s);
 			continue;
 		}
 
diff --git a/net/core/dev.c b/net/core/dev.c
index be9924f..ec87421 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2761,7 +2761,7 @@
 	switch (ret) {
 	case GRO_NORMAL:
 	case GRO_HELD:
-		skb->protocol = eth_type_trans(skb, napi->dev);
+		skb->protocol = eth_type_trans(skb, skb->dev);
 
 		if (ret == GRO_HELD)
 			skb_gro_pull(skb, -ETH_HLEN);
diff --git a/net/core/dst.c b/net/core/dst.c
index 57bc4d5..cb1b348 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -17,6 +17,7 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <net/net_namespace.h>
+#include <linux/sched.h>
 
 #include <net/dst.h>
 
@@ -79,6 +80,7 @@
 	while ((dst = next) != NULL) {
 		next = dst->next;
 		prefetch(&next->next);
+		cond_resched();
 		if (likely(atomic_read(&dst->__refcnt))) {
 			last->next = dst;
 			last = dst;
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index d8aee58..236a998 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -927,6 +927,7 @@
 	case ETHTOOL_GPERMADDR:
 	case ETHTOOL_GUFO:
 	case ETHTOOL_GGSO:
+	case ETHTOOL_GGRO:
 	case ETHTOOL_GFLAGS:
 	case ETHTOOL_GPFLAGS:
 	case ETHTOOL_GRXFH:
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index fbc1c74..099c753 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -410,7 +410,8 @@
 	const struct iw_statistics *iw;
 	ssize_t ret = -EINVAL;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return restart_syscall();
 	if (dev_isalive(dev)) {
 		iw = get_wireless_stats(dev);
 		if (iw)
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index de0c2c7..2e692af 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3524,6 +3524,7 @@
 			wait_event_interruptible_timeout(t->queue,
 							 t->control != 0,
 							 HZ/10);
+			try_to_freeze();
 			continue;
 		}
 
diff --git a/net/dccp/ccid.c b/net/dccp/ccid.c
index f3e9ba1..ff16e9d 100644
--- a/net/dccp/ccid.c
+++ b/net/dccp/ccid.c
@@ -77,34 +77,24 @@
 	return err;
 }
 
-static struct kmem_cache *ccid_kmem_cache_create(int obj_size, const char *fmt,...)
+static struct kmem_cache *ccid_kmem_cache_create(int obj_size, char *slab_name_fmt, const char *fmt,...)
 {
 	struct kmem_cache *slab;
-	char slab_name_fmt[32], *slab_name;
 	va_list args;
 
 	va_start(args, fmt);
-	vsnprintf(slab_name_fmt, sizeof(slab_name_fmt), fmt, args);
+	vsnprintf(slab_name_fmt, CCID_SLAB_NAME_LENGTH, fmt, args);
 	va_end(args);
 
-	slab_name = kstrdup(slab_name_fmt, GFP_KERNEL);
-	if (slab_name == NULL)
-		return NULL;
-	slab = kmem_cache_create(slab_name, sizeof(struct ccid) + obj_size, 0,
+	slab = kmem_cache_create(slab_name_fmt, sizeof(struct ccid) + obj_size, 0,
 				 SLAB_HWCACHE_ALIGN, NULL);
-	if (slab == NULL)
-		kfree(slab_name);
 	return slab;
 }
 
 static void ccid_kmem_cache_destroy(struct kmem_cache *slab)
 {
-	if (slab != NULL) {
-		const char *name = kmem_cache_name(slab);
-
+	if (slab != NULL)
 		kmem_cache_destroy(slab);
-		kfree(name);
-	}
 }
 
 static int ccid_activate(struct ccid_operations *ccid_ops)
@@ -113,6 +103,7 @@
 
 	ccid_ops->ccid_hc_rx_slab =
 			ccid_kmem_cache_create(ccid_ops->ccid_hc_rx_obj_size,
+					       ccid_ops->ccid_hc_rx_slab_name,
 					       "ccid%u_hc_rx_sock",
 					       ccid_ops->ccid_id);
 	if (ccid_ops->ccid_hc_rx_slab == NULL)
@@ -120,6 +111,7 @@
 
 	ccid_ops->ccid_hc_tx_slab =
 			ccid_kmem_cache_create(ccid_ops->ccid_hc_tx_obj_size,
+					       ccid_ops->ccid_hc_tx_slab_name,
 					       "ccid%u_hc_tx_sock",
 					       ccid_ops->ccid_id);
 	if (ccid_ops->ccid_hc_tx_slab == NULL)
diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h
index facedd2..6df6f8a 100644
--- a/net/dccp/ccid.h
+++ b/net/dccp/ccid.h
@@ -19,7 +19,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#define CCID_MAX 255
+/* maximum value for a CCID (RFC 4340, 19.5) */
+#define CCID_MAX		255
+#define CCID_SLAB_NAME_LENGTH	32
 
 struct tcp_info;
 
@@ -49,6 +51,8 @@
 	const char		*ccid_name;
 	struct kmem_cache	*ccid_hc_rx_slab,
 				*ccid_hc_tx_slab;
+	char			ccid_hc_rx_slab_name[CCID_SLAB_NAME_LENGTH];
+	char			ccid_hc_tx_slab_name[CCID_SLAB_NAME_LENGTH];
 	__u32			ccid_hc_rx_obj_size,
 				ccid_hc_tx_obj_size;
 	/* Interface Routines */
diff --git a/net/dccp/probe.c b/net/dccp/probe.c
index a1362dc..f5b3464 100644
--- a/net/dccp/probe.c
+++ b/net/dccp/probe.c
@@ -161,7 +161,8 @@
 	if (!proc_net_fops_create(&init_net, procname, S_IRUSR, &dccpprobe_fops))
 		goto err0;
 
-	ret = register_jprobe(&dccp_send_probe);
+	try_then_request_module((ret = register_jprobe(&dccp_send_probe)) == 0,
+				"dccp");
 	if (ret)
 		goto err1;
 
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 040c4f0..26dec2b 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1317,14 +1317,19 @@
 {
 	int *valp = ctl->data;
 	int val = *valp;
+	loff_t pos = *ppos;
 	int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
 
 	if (write && *valp != val) {
 		struct net *net = ctl->extra2;
 
 		if (valp != &IPV4_DEVCONF_DFLT(net, FORWARDING)) {
-			if (!rtnl_trylock())
+			if (!rtnl_trylock()) {
+				/* Restore the original values before restarting */
+				*valp = val;
+				*ppos = pos;
 				return restart_syscall();
+			}
 			if (valp == &IPV4_DEVCONF_ALL(net, FORWARDING)) {
 				inet_forward_change(net);
 			} else if (*valp) {
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 76c0840..a42f658 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -946,7 +946,6 @@
 		break;
 	case IGMP_HOST_MEMBERSHIP_REPORT:
 	case IGMPV2_HOST_MEMBERSHIP_REPORT:
-	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 		/* Is it our report looped back? */
 		if (skb_rtable(skb)->fl.iif == 0)
 			break;
@@ -960,6 +959,7 @@
 		in_dev_put(in_dev);
 		return pim_rcv_v1(skb);
 #endif
+	case IGMPV3_HOST_MEMBERSHIP_REPORT:
 	case IGMP_DVMRP:
 	case IGMP_TRACE:
 	case IGMP_HOST_LEAVE_MESSAGE:
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index bdb78dd..1aaa811 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -368,7 +368,7 @@
 			yes = entry->sport >= op[1].no;
 			break;
 		case INET_DIAG_BC_S_LE:
-			yes = entry->dport <= op[1].no;
+			yes = entry->sport <= op[1].no;
 			break;
 		case INET_DIAG_BC_D_GE:
 			yes = entry->dport >= op[1].no;
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index 38fbf04..544ce08 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -124,16 +124,12 @@
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp_tunnel_attach(x);
 		if (err)
-			goto error_tunnel;
+			goto out;
 	}
 
 	err = 0;
 out:
 	return err;
-
-error_tunnel:
-	ipcomp_destroy(x);
-	goto out;
 }
 
 static const struct xfrm_type ipcomp_type = {
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 0663276..90203e1 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -925,10 +925,10 @@
 	if (t && !IS_ERR(t)) {
 		struct arpt_getinfo info;
 		const struct xt_table_info *private = t->private;
-
 #ifdef CONFIG_COMPAT
+		struct xt_table_info tmp;
+
 		if (compat) {
-			struct xt_table_info tmp;
 			ret = compat_table_info(private, &tmp);
 			xt_compat_flush_offsets(NFPROTO_ARP);
 			private = &tmp;
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 572330a..3ce53cf 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -1132,10 +1132,10 @@
 	if (t && !IS_ERR(t)) {
 		struct ipt_getinfo info;
 		const struct xt_table_info *private = t->private;
-
 #ifdef CONFIG_COMPAT
+		struct xt_table_info tmp;
+
 		if (compat) {
-			struct xt_table_info tmp;
 			ret = compat_table_info(private, &tmp);
 			xt_compat_flush_offsets(AF_INET);
 			private = &tmp;
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index d171b12..d1ea38a 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -210,7 +210,7 @@
 	},
 	{
 		.procname	= "ip_conntrack_buckets",
-		.data		= &nf_conntrack_htable_size,
+		.data		= &init_net.ct.htable_size,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0444,
 		.proc_handler	= proc_dointvec,
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
index 8668a3d..2fb7b76 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
@@ -32,7 +32,7 @@
 	struct hlist_nulls_node *n;
 
 	for (st->bucket = 0;
-	     st->bucket < nf_conntrack_htable_size;
+	     st->bucket < net->ct.htable_size;
 	     st->bucket++) {
 		n = rcu_dereference(net->ct.hash[st->bucket].first);
 		if (!is_a_nulls(n))
@@ -50,7 +50,7 @@
 	head = rcu_dereference(head->next);
 	while (is_a_nulls(head)) {
 		if (likely(get_nulls_value(head) == st->bucket)) {
-			if (++st->bucket >= nf_conntrack_htable_size)
+			if (++st->bucket >= net->ct.htable_size)
 				return NULL;
 		}
 		head = rcu_dereference(net->ct.hash[st->bucket].first);
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index fe1a644..26066a2 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -35,9 +35,6 @@
 
 static struct nf_conntrack_l3proto *l3proto __read_mostly;
 
-/* Calculated at init based on memory size */
-static unsigned int nf_nat_htable_size __read_mostly;
-
 #define MAX_IP_NAT_PROTO 256
 static const struct nf_nat_protocol *nf_nat_protos[MAX_IP_NAT_PROTO]
 						__read_mostly;
@@ -72,7 +69,7 @@
 
 /* We keep an extra hash for each conntrack, for fast searching. */
 static inline unsigned int
-hash_by_src(const struct nf_conntrack_tuple *tuple)
+hash_by_src(const struct net *net, const struct nf_conntrack_tuple *tuple)
 {
 	unsigned int hash;
 
@@ -80,7 +77,7 @@
 	hash = jhash_3words((__force u32)tuple->src.u3.ip,
 			    (__force u32)tuple->src.u.all,
 			    tuple->dst.protonum, 0);
-	return ((u64)hash * nf_nat_htable_size) >> 32;
+	return ((u64)hash * net->ipv4.nat_htable_size) >> 32;
 }
 
 /* Is this tuple already taken? (not by us) */
@@ -147,7 +144,7 @@
 		     struct nf_conntrack_tuple *result,
 		     const struct nf_nat_range *range)
 {
-	unsigned int h = hash_by_src(tuple);
+	unsigned int h = hash_by_src(net, tuple);
 	const struct nf_conn_nat *nat;
 	const struct nf_conn *ct;
 	const struct hlist_node *n;
@@ -330,7 +327,7 @@
 	if (have_to_hash) {
 		unsigned int srchash;
 
-		srchash = hash_by_src(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+		srchash = hash_by_src(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
 		spin_lock_bh(&nf_nat_lock);
 		/* nf_conntrack_alter_reply might re-allocate exntension aera */
 		nat = nfct_nat(ct);
@@ -679,8 +676,10 @@
 
 static int __net_init nf_nat_net_init(struct net *net)
 {
-	net->ipv4.nat_bysource = nf_ct_alloc_hashtable(&nf_nat_htable_size,
-						      &net->ipv4.nat_vmalloced, 0);
+	/* Leave them the same for the moment. */
+	net->ipv4.nat_htable_size = net->ct.htable_size;
+	net->ipv4.nat_bysource = nf_ct_alloc_hashtable(&net->ipv4.nat_htable_size,
+						       &net->ipv4.nat_vmalloced, 0);
 	if (!net->ipv4.nat_bysource)
 		return -ENOMEM;
 	return 0;
@@ -703,7 +702,7 @@
 	nf_ct_iterate_cleanup(net, &clean_nat, NULL);
 	synchronize_rcu();
 	nf_ct_free_hashtable(net->ipv4.nat_bysource, net->ipv4.nat_vmalloced,
-			     nf_nat_htable_size);
+			     net->ipv4.nat_htable_size);
 }
 
 static struct pernet_operations nf_nat_net_ops = {
@@ -724,9 +723,6 @@
 		return ret;
 	}
 
-	/* Leave them the same for the moment. */
-	nf_nat_htable_size = nf_conntrack_htable_size;
-
 	ret = register_pernet_subsys(&nf_nat_net_ops);
 	if (ret < 0)
 		goto cleanup_extend;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index e446496..d62b05d 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -586,7 +586,9 @@
 {
 	remove_proc_entry("rt_cache", net->proc_net_stat);
 	remove_proc_entry("rt_cache", net->proc_net);
+#ifdef CONFIG_NET_CLS_ROUTE
 	remove_proc_entry("rt_acct", net->proc_net);
+#endif
 }
 
 static struct pernet_operations ip_rt_proc_ops __net_initdata =  {
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 28e0296..3fddc69 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5783,11 +5783,9 @@
 
 				/* tcp_ack considers this ACK as duplicate
 				 * and does not calculate rtt.
-				 * Fix it at least with timestamps.
+				 * Force it here.
 				 */
-				if (tp->rx_opt.saw_tstamp &&
-				    tp->rx_opt.rcv_tsecr && !tp->srtt)
-					tcp_ack_saw_tstamp(sk, 0);
+				tcp_ack_update_rtt(sk, 0, 0);
 
 				if (tp->rx_opt.tstamp_ok)
 					tp->advmss -= TCPOLEN_TSTAMP_ALIGNED;
diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c
index bb110c5..9bc805d 100644
--- a/net/ipv4/tcp_probe.c
+++ b/net/ipv4/tcp_probe.c
@@ -39,9 +39,9 @@
 MODULE_PARM_DESC(port, "Port to match (0=all)");
 module_param(port, int, 0);
 
-static int bufsize __read_mostly = 4096;
+static unsigned int bufsize __read_mostly = 4096;
 MODULE_PARM_DESC(bufsize, "Log buffer size in packets (4096)");
-module_param(bufsize, int, 0);
+module_param(bufsize, uint, 0);
 
 static int full __read_mostly;
 MODULE_PARM_DESC(full, "Full log (1=every ack packet received,  0=only cwnd changes)");
@@ -75,12 +75,12 @@
 
 static inline int tcp_probe_used(void)
 {
-	return (tcp_probe.head - tcp_probe.tail) % bufsize;
+	return (tcp_probe.head - tcp_probe.tail) & (bufsize - 1);
 }
 
 static inline int tcp_probe_avail(void)
 {
-	return bufsize - tcp_probe_used();
+	return bufsize - tcp_probe_used() - 1;
 }
 
 /*
@@ -116,7 +116,7 @@
 			p->ssthresh = tcp_current_ssthresh(sk);
 			p->srtt = tp->srtt >> 3;
 
-			tcp_probe.head = (tcp_probe.head + 1) % bufsize;
+			tcp_probe.head = (tcp_probe.head + 1) & (bufsize - 1);
 		}
 		tcp_probe.lastcwnd = tp->snd_cwnd;
 		spin_unlock(&tcp_probe.lock);
@@ -149,7 +149,7 @@
 static int tcpprobe_sprint(char *tbuf, int n)
 {
 	const struct tcp_log *p
-		= tcp_probe.log + tcp_probe.tail % bufsize;
+		= tcp_probe.log + tcp_probe.tail;
 	struct timespec tv
 		= ktime_to_timespec(ktime_sub(p->tstamp, tcp_probe.start));
 
@@ -192,7 +192,7 @@
 		width = tcpprobe_sprint(tbuf, sizeof(tbuf));
 
 		if (cnt + width < len)
-			tcp_probe.tail = (tcp_probe.tail + 1) % bufsize;
+			tcp_probe.tail = (tcp_probe.tail + 1) & (bufsize - 1);
 
 		spin_unlock_bh(&tcp_probe.lock);
 
@@ -222,9 +222,10 @@
 	init_waitqueue_head(&tcp_probe.wait);
 	spin_lock_init(&tcp_probe.lock);
 
-	if (bufsize < 0)
+	if (bufsize == 0)
 		return -EINVAL;
 
+	bufsize = roundup_pow_of_two(bufsize);
 	tcp_probe.log = kcalloc(bufsize, sizeof(struct tcp_log), GFP_KERNEL);
 	if (!tcp_probe.log)
 		goto err0;
@@ -236,7 +237,7 @@
 	if (ret)
 		goto err1;
 
-	pr_info("TCP probe registered (port=%d)\n", port);
+	pr_info("TCP probe registered (port=%d) bufsize=%u\n", port, bufsize);
 	return 0;
  err1:
 	proc_net_remove(&init_net, procname);
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 8c08a28..67107d6 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -15,7 +15,6 @@
 #include <net/xfrm.h>
 #include <net/ip.h>
 
-static struct dst_ops xfrm4_dst_ops;
 static struct xfrm_policy_afinfo xfrm4_policy_afinfo;
 
 static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
@@ -190,8 +189,10 @@
 
 static inline int xfrm4_garbage_collect(struct dst_ops *ops)
 {
-	xfrm4_policy_afinfo.garbage_collect(&init_net);
-	return (atomic_read(&xfrm4_dst_ops.entries) > xfrm4_dst_ops.gc_thresh*2);
+	struct net *net = container_of(ops, struct net, xfrm.xfrm4_dst_ops);
+
+	xfrm4_policy_afinfo.garbage_collect(net);
+	return (atomic_read(&ops->entries) > ops->gc_thresh * 2);
 }
 
 static void xfrm4_update_pmtu(struct dst_entry *dst, u32 mtu)
@@ -268,7 +269,7 @@
 static struct ctl_table xfrm4_policy_table[] = {
 	{
 		.procname       = "xfrm4_gc_thresh",
-		.data           = &xfrm4_dst_ops.gc_thresh,
+		.data           = &init_net.xfrm.xfrm4_dst_ops.gc_thresh,
 		.maxlen         = sizeof(int),
 		.mode           = 0644,
 		.proc_handler   = proc_dointvec,
@@ -295,8 +296,6 @@
 
 void __init xfrm4_init(int rt_max_size)
 {
-	xfrm4_state_init();
-	xfrm4_policy_init();
 	/*
 	 * Select a default value for the gc_thresh based on the main route
 	 * table hash size.  It seems to me the worst case scenario is when
@@ -308,6 +307,9 @@
 	 * and start cleaning when were 1/2 full
 	 */
 	xfrm4_dst_ops.gc_thresh = rt_max_size/2;
+
+	xfrm4_state_init();
+	xfrm4_policy_init();
 #ifdef CONFIG_SYSCTL
 	sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv4_ctl_path,
 						xfrm4_policy_table);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index de7a194..143791d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -502,8 +502,11 @@
 	if (p == &net->ipv6.devconf_dflt->forwarding)
 		return 0;
 
-	if (!rtnl_trylock())
+	if (!rtnl_trylock()) {
+		/* Restore the original values before restarting */
+		*p = old;
 		return restart_syscall();
+	}
 
 	if (p == &net->ipv6.devconf_all->forwarding) {
 		__s32 newf = net->ipv6.devconf_all->forwarding;
@@ -4028,12 +4031,15 @@
 {
 	int *valp = ctl->data;
 	int val = *valp;
+	loff_t pos = *ppos;
 	int ret;
 
 	ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
 
 	if (write)
 		ret = addrconf_fixup_forwarding(ctl, valp, val);
+	if (ret)
+		*ppos = pos;
 	return ret;
 }
 
@@ -4075,8 +4081,11 @@
 	if (p == &net->ipv6.devconf_dflt->disable_ipv6)
 		return 0;
 
-	if (!rtnl_trylock())
+	if (!rtnl_trylock()) {
+		/* Restore the original values before restarting */
+		*p = old;
 		return restart_syscall();
+	}
 
 	if (p == &net->ipv6.devconf_all->disable_ipv6) {
 		__s32 newf = net->ipv6.devconf_all->disable_ipv6;
@@ -4095,12 +4104,15 @@
 {
 	int *valp = ctl->data;
 	int val = *valp;
+	loff_t pos = *ppos;
 	int ret;
 
 	ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
 
 	if (write)
 		ret = addrconf_disable_ipv6(ctl, valp, val);
+	if (ret)
+		*ppos = pos;
 	return ret;
 }
 
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index df159ff..4bac362 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -559,6 +559,11 @@
 	return skb_dst(skb) ? ip6_dst_idev(skb_dst(skb)) : __in6_dev_get(skb->dev);
 }
 
+static inline struct net *ipv6_skb_net(struct sk_buff *skb)
+{
+	return skb_dst(skb) ? dev_net(skb_dst(skb)->dev) : dev_net(skb->dev);
+}
+
 /* Router Alert as of RFC 2711 */
 
 static int ipv6_hop_ra(struct sk_buff *skb, int optoff)
@@ -580,8 +585,8 @@
 static int ipv6_hop_jumbo(struct sk_buff *skb, int optoff)
 {
 	const unsigned char *nh = skb_network_header(skb);
+	struct net *net = ipv6_skb_net(skb);
 	u32 pkt_len;
-	struct net *net = dev_net(skb_dst(skb)->dev);
 
 	if (nh[optoff + 1] != 4 || (optoff & 3) != 2) {
 		LIMIT_NETDEBUG(KERN_DEBUG "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\n",
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 2f2a5ca..002e6ee 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -154,16 +154,12 @@
 	if (x->props.mode == XFRM_MODE_TUNNEL) {
 		err = ipcomp6_tunnel_attach(x);
 		if (err)
-			goto error_tunnel;
+			goto out;
 	}
 
 	err = 0;
 out:
 	return err;
-error_tunnel:
-	ipcomp_destroy(x);
-
-	goto out;
 }
 
 static const struct xfrm_type ipcomp6_type =
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 480d7f8..8a7e0f5 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1164,10 +1164,10 @@
 	if (t && !IS_ERR(t)) {
 		struct ip6t_getinfo info;
 		const struct xt_table_info *private = t->private;
-
 #ifdef CONFIG_COMPAT
+		struct xt_table_info tmp;
+
 		if (compat) {
-			struct xt_table_info tmp;
 			ret = compat_table_info(private, &tmp);
 			xt_compat_flush_offsets(AF_INET6);
 			private = &tmp;
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 312c20ad..624a548 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -63,6 +63,7 @@
 	struct inet_frag_queue	q;
 
 	__be32			id;		/* fragment id		*/
+	u32			user;
 	struct in6_addr		saddr;
 	struct in6_addr		daddr;
 
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 7254e3f..dbdc696 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -24,7 +24,6 @@
 #include <net/mip6.h>
 #endif
 
-static struct dst_ops xfrm6_dst_ops;
 static struct xfrm_policy_afinfo xfrm6_policy_afinfo;
 
 static struct dst_entry *xfrm6_dst_lookup(struct net *net, int tos,
@@ -224,8 +223,10 @@
 
 static inline int xfrm6_garbage_collect(struct dst_ops *ops)
 {
-	xfrm6_policy_afinfo.garbage_collect(&init_net);
-	return (atomic_read(&xfrm6_dst_ops.entries) > xfrm6_dst_ops.gc_thresh*2);
+	struct net *net = container_of(ops, struct net, xfrm.xfrm6_dst_ops);
+
+	xfrm6_policy_afinfo.garbage_collect(net);
+	return (atomic_read(&ops->entries) > ops->gc_thresh * 2);
 }
 
 static void xfrm6_update_pmtu(struct dst_entry *dst, u32 mtu)
@@ -310,7 +311,7 @@
 static struct ctl_table xfrm6_policy_table[] = {
 	{
 		.procname       = "xfrm6_gc_thresh",
-		.data	   	= &xfrm6_dst_ops.gc_thresh,
+		.data	   	= &init_net.xfrm.xfrm6_dst_ops.gc_thresh,
 		.maxlen	 	= sizeof(int),
 		.mode	   	= 0644,
 		.proc_handler   = proc_dointvec,
@@ -326,13 +327,6 @@
 	int ret;
 	unsigned int gc_thresh;
 
-	ret = xfrm6_policy_init();
-	if (ret)
-		goto out;
-
-	ret = xfrm6_state_init();
-	if (ret)
-		goto out_policy;
 	/*
 	 * We need a good default value for the xfrm6 gc threshold.
 	 * In ipv4 we set it to the route hash table size * 8, which
@@ -346,6 +340,15 @@
 	 */
 	gc_thresh = FIB6_TABLE_HASHSZ * 8;
 	xfrm6_dst_ops.gc_thresh = (gc_thresh < 1024) ? 1024 : gc_thresh;
+
+	ret = xfrm6_policy_init();
+	if (ret)
+		goto out;
+
+	ret = xfrm6_state_init();
+	if (ret)
+		goto out_policy;
+
 #ifdef CONFIG_SYSCTL
 	sysctl_hdr = register_net_sysctl_table(&init_net, net_ipv6_ctl_path,
 						xfrm6_policy_table);
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 156020d..6b3602d 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -698,15 +698,18 @@
 
       /* Query PPP channel and unit number */
     case PPPIOCGCHAN:
+      lock_kernel();
       if(ap->ppp_open && !put_user(ppp_channel_index(&ap->chan),
 						(int __user *)argp))
 	err = 0;
+      unlock_kernel();
       break;
     case PPPIOCGUNIT:
       lock_kernel();
       if(ap->ppp_open && !put_user(ppp_unit_number(&ap->chan),
 						(int __user *)argp))
-      err = 0;
+        err = 0;
+      unlock_kernel();
       break;
 
       /* All these ioctls can be passed both directly and from ppp_generic,
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 76fa6fe..539f43b 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -3794,9 +3794,9 @@
 
 static void __exit ipsec_pfkey_exit(void)
 {
-	unregister_pernet_subsys(&pfkey_net_ops);
 	xfrm_unregister_km(&pfkeyv2_mgr);
 	sock_unregister(PF_KEY);
+	unregister_pernet_subsys(&pfkey_net_ops);
 	proto_unregister(&key_proto);
 }
 
@@ -3807,21 +3807,22 @@
 	if (err != 0)
 		goto out;
 
-	err = sock_register(&pfkey_family_ops);
+	err = register_pernet_subsys(&pfkey_net_ops);
 	if (err != 0)
 		goto out_unregister_key_proto;
+	err = sock_register(&pfkey_family_ops);
+	if (err != 0)
+		goto out_unregister_pernet;
 	err = xfrm_register_km(&pfkeyv2_mgr);
 	if (err != 0)
 		goto out_sock_unregister;
-	err = register_pernet_subsys(&pfkey_net_ops);
-	if (err != 0)
-		goto out_xfrm_unregister_km;
 out:
 	return err;
-out_xfrm_unregister_km:
-	xfrm_unregister_km(&pfkeyv2_mgr);
+
 out_sock_unregister:
 	sock_unregister(PF_KEY);
+out_unregister_pernet:
+	unregister_pernet_subsys(&pfkey_net_ops);
 out_unregister_key_proto:
 	proto_unregister(&key_proto);
 	goto out;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 6dc3579..9ae1a47 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1331,6 +1331,9 @@
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_conf *conf = &local->hw.conf;
 
+	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+		return -EOPNOTSUPP;
+
 	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
 		return -EOPNOTSUPP;
 
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index ee94ea0..da8497e 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -680,7 +680,7 @@
 		__entry->ret = ret;
 		__entry->action = action;
 		__entry->tid = tid;
-		__entry->ssn = *ssn;
+		__entry->ssn = ssn ? *ssn : 0;
 	),
 
 	TP_printk(
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 1f2db64..22f0c2a 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -647,7 +647,7 @@
 	}
 	if (pos[1] != 0 &&
 	    (pos[1] != ifibss->ssid_len ||
-	     !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
+	     memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
 		/* Ignore ProbeReq for foreign SSID */
 		return;
 	}
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 80c16f6..32abae3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -15,12 +15,14 @@
 #include <linux/netdevice.h>
 #include <linux/rtnetlink.h>
 #include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
 #include "ieee80211_i.h"
 #include "sta_info.h"
 #include "debugfs_netdev.h"
 #include "mesh.h"
 #include "led.h"
 #include "driver-ops.h"
+#include "wme.h"
 
 /**
  * DOC: Interface list locking
@@ -314,7 +316,7 @@
 	if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
 
-	netif_start_queue(dev);
+	netif_tx_start_all_queues(dev);
 
 	return 0;
  err_del_interface:
@@ -343,7 +345,7 @@
 	/*
 	 * Stop TX on this interface first.
 	 */
-	netif_stop_queue(dev);
+	netif_tx_stop_all_queues(dev);
 
 	/*
 	 * Now delete all active aggregation sessions.
@@ -644,6 +646,12 @@
 	WARN_ON(flushed);
 }
 
+static u16 ieee80211_netdev_select_queue(struct net_device *dev,
+					 struct sk_buff *skb)
+{
+	return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
+}
+
 static const struct net_device_ops ieee80211_dataif_ops = {
 	.ndo_open		= ieee80211_open,
 	.ndo_stop		= ieee80211_stop,
@@ -652,8 +660,38 @@
 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
 	.ndo_change_mtu 	= ieee80211_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_select_queue	= ieee80211_netdev_select_queue,
 };
 
+static u16 ieee80211_monitor_select_queue(struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_hdr *hdr;
+	struct ieee80211_radiotap_header *rtap = (void *)skb->data;
+	u8 *p;
+
+	if (local->hw.queues < 4)
+		return 0;
+
+	if (skb->len < 4 ||
+	    skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
+		return 0; /* doesn't matter, frame will be dropped */
+
+	hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
+
+	if (!ieee80211_is_data_qos(hdr->frame_control)) {
+		skb->priority = 7;
+		return ieee802_1d_to_ac[skb->priority];
+	}
+
+	p = ieee80211_get_qos_ctl(hdr);
+	skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
+
+	return ieee80211_downgrade_queue(local, skb);
+}
+
 static const struct net_device_ops ieee80211_monitorif_ops = {
 	.ndo_open		= ieee80211_open,
 	.ndo_stop		= ieee80211_stop,
@@ -662,6 +700,7 @@
 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
 	.ndo_change_mtu 	= ieee80211_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_select_queue	= ieee80211_monitor_select_queue,
 };
 
 static void ieee80211_if_setup(struct net_device *dev)
@@ -768,8 +807,8 @@
 
 	ASSERT_RTNL();
 
-	ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
-			    name, ieee80211_if_setup);
+	ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size,
+			       name, ieee80211_if_setup, local->hw.queues);
 	if (!ndev)
 		return -ENOMEM;
 	dev_net_set(ndev, wiphy_net(local->hw.wiphy));
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c79e59f..05a18f4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -942,7 +942,7 @@
 	ieee80211_recalc_ps(local, -1);
 	mutex_unlock(&local->iflist_mtx);
 
-	netif_start_queue(sdata->dev);
+	netif_tx_start_all_queues(sdata->dev);
 	netif_carrier_on(sdata->dev);
 }
 
@@ -1074,7 +1074,7 @@
 	 * time -- we don't want the scan code to enable queues.
 	 */
 
-	netif_stop_queue(sdata->dev);
+	netif_tx_stop_all_queues(sdata->dev);
 	netif_carrier_off(sdata->dev);
 
 	rcu_read_lock();
@@ -1963,7 +1963,9 @@
 			rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
 			break;
 		case IEEE80211_STYPE_ACTION:
-			/* XXX: differentiate, can only happen for CSA now! */
+			if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT)
+				break;
+
 			ieee80211_sta_process_chanswitch(sdata,
 					&mgmt->u.action.u.chan_switch.sw_elem,
 					ifmgd->associated);
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index b9007f8..12a2bff 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -245,6 +245,9 @@
 		info->control.rates[i].count = 1;
 	}
 
+	if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
+		return;
+
 	if (sta && sdata->force_unicast_rateidx > -1) {
 		info->control.rates[0].idx = sdata->force_unicast_rateidx;
 	} else {
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 699d3ed..29bc4c5 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -190,7 +190,7 @@
 	rate_control_pid_normalize(pinfo, sband->n_bitrates);
 
 	/* Compute the proportional, integral and derivative errors. */
-	err_prop = (pinfo->target << RC_PID_ARITH_SHIFT) - pf;
+	err_prop = (pinfo->target - pf) << RC_PID_ARITH_SHIFT;
 
 	err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift;
 	spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 9f2807a..82a30c1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1746,7 +1746,9 @@
 			memset(info, 0, sizeof(*info));
 			info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
 			info->control.vif = &rx->sdata->vif;
-			ieee80211_select_queue(local, fwd_skb);
+			skb_set_queue_mapping(skb,
+				ieee80211_select_queue(rx->sdata, fwd_skb));
+			ieee80211_set_qos_hdr(local, skb);
 			if (is_multicast_ether_addr(fwd_hdr->addr1))
 				IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.mesh,
 								fwded_mcast);
@@ -2013,6 +2015,10 @@
 		}
 		break;
 	default:
+		/* do not process rejected action frames */
+		if (mgmt->u.action.category & 0x80)
+			return RX_DROP_MONITOR;
+
 		return RX_CONTINUE;
 	}
 
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index f1a4c71..bc17cf7 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -353,10 +353,10 @@
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 			if (sdata->u.mgd.associated) {
 				ieee80211_scan_ps_disable(sdata);
-				netif_wake_queue(sdata->dev);
+				netif_tx_wake_all_queues(sdata->dev);
 			}
 		} else
-			netif_wake_queue(sdata->dev);
+			netif_tx_wake_all_queues(sdata->dev);
 
 		/* re-enable beaconing */
 		if (sdata->vif.type == NL80211_IFTYPE_AP ||
@@ -411,7 +411,7 @@
 		 * are handled in the scan state machine
 		 */
 		if (sdata->vif.type != NL80211_IFTYPE_STATION)
-			netif_stop_queue(sdata->dev);
+			netif_tx_stop_all_queues(sdata->dev);
 	}
 	mutex_unlock(&local->iflist_mtx);
 
@@ -439,6 +439,16 @@
 	if (local->scan_req)
 		return -EBUSY;
 
+	if (req != local->int_scan_req &&
+	    sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    !list_empty(&ifmgd->work_list)) {
+		/* actually wait for the work it's doing to finish/time out */
+		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+		local->scan_req = req;
+		local->scan_sdata = sdata;
+		return 0;
+	}
+
 	if (local->ops->hw_scan) {
 		u8 *ies;
 
@@ -463,14 +473,6 @@
 	local->scan_req = req;
 	local->scan_sdata = sdata;
 
-	if (req != local->int_scan_req &&
-	    sdata->vif.type == NL80211_IFTYPE_STATION &&
-	    !list_empty(&ifmgd->work_list)) {
-		/* actually wait for the work it's doing to finish/time out */
-		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
-		return 0;
-	}
-
 	if (local->ops->hw_scan)
 		__set_bit(SCAN_HW_SCANNING, &local->scanning);
 	else
@@ -575,7 +577,7 @@
 			continue;
 
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-			netif_stop_queue(sdata->dev);
+			netif_tx_stop_all_queues(sdata->dev);
 			if (sdata->u.mgd.associated)
 				ieee80211_scan_ps_enable(sdata);
 		}
@@ -610,7 +612,7 @@
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 			if (sdata->u.mgd.associated)
 				ieee80211_scan_ps_disable(sdata);
-			netif_wake_queue(sdata->dev);
+			netif_tx_wake_all_queues(sdata->dev);
 		}
 	}
 	mutex_unlock(&local->iflist_mtx);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 27ceaef..ac210b5 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1512,7 +1512,7 @@
 				return;
 			}
 
-	ieee80211_select_queue(local, skb);
+	ieee80211_set_qos_hdr(local, skb);
 	ieee80211_tx(sdata, skb, false);
 	rcu_read_unlock();
 }
@@ -2291,6 +2291,9 @@
 	skb_set_network_header(skb, 0);
 	skb_set_transport_header(skb, 0);
 
+	/* send all internal mgmt frames on VO */
+	skb_set_queue_mapping(skb, 0);
+
 	/*
 	 * The other path calling ieee80211_xmit is from the tasklet,
 	 * and while we can handle concurrent transmissions locking
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index dc76267..3848140 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -269,6 +269,7 @@
 				   enum queue_stop_reason reason)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata;
 
 	if (WARN_ON(queue >= hw->queues))
 		return;
@@ -281,6 +282,11 @@
 
 	if (!skb_queue_empty(&local->pending[queue]))
 		tasklet_schedule(&local->tx_pending_tasklet);
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sdata, &local->interfaces, list)
+		netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
+	rcu_read_unlock();
 }
 
 void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
@@ -305,11 +311,17 @@
 				   enum queue_stop_reason reason)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata;
 
 	if (WARN_ON(queue >= hw->queues))
 		return;
 
 	__set_bit(reason, &local->queue_stop_reasons[queue]);
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sdata, &local->interfaces, list)
+		netif_tx_stop_queue(netdev_get_tx_queue(sdata->dev, queue));
+	rcu_read_unlock();
 }
 
 void ieee80211_stop_queue_by_reason(struct ieee80211_hw *hw, int queue,
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index b19b769..79d887d 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -44,22 +44,69 @@
 }
 
 
-/* Indicate which queue to use.  */
-static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
+/* Indicate which queue to use. */
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+			   struct sk_buff *skb)
 {
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta = NULL;
+	u32 sta_flags = 0;
+	const u8 *ra = NULL;
+	bool qos = false;
 
-	if (!ieee80211_is_data(hdr->frame_control)) {
-		/* management frames go on AC_VO queue, but are sent
-		* without QoS control fields */
-		return 0;
+	if (local->hw.queues < 4 || skb->len < 6) {
+		skb->priority = 0; /* required for correct WPA/11i MIC */
+		return min_t(u16, local->hw.queues - 1,
+			     ieee802_1d_to_ac[skb->priority]);
 	}
 
-	if (0 /* injected */) {
-		/* use AC from radiotap */
+	rcu_read_lock();
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP_VLAN:
+		rcu_read_lock();
+		sta = rcu_dereference(sdata->u.vlan.sta);
+		if (sta)
+			sta_flags = get_sta_flags(sta);
+		rcu_read_unlock();
+		if (sta)
+			break;
+	case NL80211_IFTYPE_AP:
+		ra = skb->data;
+		break;
+	case NL80211_IFTYPE_WDS:
+		ra = sdata->u.wds.remote_addr;
+		break;
+#ifdef CONFIG_MAC80211_MESH
+	case NL80211_IFTYPE_MESH_POINT:
+		/*
+		 * XXX: This is clearly broken ... but already was before,
+		 * because ieee80211_fill_mesh_addresses() would clear A1
+		 * except for multicast addresses.
+		 */
+		break;
+#endif
+	case NL80211_IFTYPE_STATION:
+		ra = sdata->u.mgd.bssid;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ra = skb->data;
+		break;
+	default:
+		break;
 	}
 
-	if (!ieee80211_is_data_qos(hdr->frame_control)) {
+	if (!sta && ra && !is_multicast_ether_addr(ra)) {
+		sta = sta_info_get(local, ra);
+		if (sta)
+			sta_flags = get_sta_flags(sta);
+	}
+
+	if (sta_flags & WLAN_STA_WME)
+		qos = true;
+
+	rcu_read_unlock();
+
+	if (!qos) {
 		skb->priority = 0; /* required for correct WPA/11i MIC */
 		return ieee802_1d_to_ac[skb->priority];
 	}
@@ -68,6 +115,12 @@
 	 * data frame has */
 	skb->priority = cfg80211_classify8021d(skb);
 
+	return ieee80211_downgrade_queue(local, skb);
+}
+
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+			      struct sk_buff *skb)
+{
 	/* in case we are a client verify acm is not set for this ac */
 	while (unlikely(local->wmm_acm & BIT(skb->priority))) {
 		if (wme_downgrade_ac(skb)) {
@@ -85,24 +138,17 @@
 	return ieee802_1d_to_ac[skb->priority];
 }
 
-void ieee80211_select_queue(struct ieee80211_local *local, struct sk_buff *skb)
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb)
 {
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	u16 queue;
-	u8 tid;
+	struct ieee80211_hdr *hdr = (void *)skb->data;
 
-	queue = classify80211(local, skb);
-	if (unlikely(queue >= local->hw.queues))
-		queue = local->hw.queues - 1;
-
-	/*
-	 * Now we know the 1d priority, fill in the QoS header if
-	 * there is one (and we haven't done this before).
-	 */
+	/* Fill in the QoS header if there is one. */
 	if (ieee80211_is_data_qos(hdr->frame_control)) {
 		u8 *p = ieee80211_get_qos_ctl(hdr);
-		u8 ack_policy = 0;
+		u8 ack_policy = 0, tid;
+
 		tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+
 		if (unlikely(local->wifi_wme_noack_test))
 			ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK <<
 					QOS_CONTROL_ACK_POLICY_SHIFT;
@@ -110,6 +156,4 @@
 		*p++ = ack_policy | tid;
 		*p = 0;
 	}
-
-	skb_set_queue_mapping(skb, queue);
 }
diff --git a/net/mac80211/wme.h b/net/mac80211/wme.h
index d4fd87c..6053b1c 100644
--- a/net/mac80211/wme.h
+++ b/net/mac80211/wme.h
@@ -20,7 +20,11 @@
 
 extern const int ieee802_1d_to_ac[8];
 
-void ieee80211_select_queue(struct ieee80211_local *local,
-			    struct sk_buff *skb);
+u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
+			   struct sk_buff *skb);
+void ieee80211_set_qos_hdr(struct ieee80211_local *local, struct sk_buff *skb);
+u16 ieee80211_downgrade_queue(struct ieee80211_local *local,
+                              struct sk_buff *skb);
+
 
 #endif /* _WME_H */
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 0e98c32..4d79e3c 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -30,6 +30,7 @@
 #include <linux/netdevice.h>
 #include <linux/socket.h>
 #include <linux/mm.h>
+#include <linux/nsproxy.h>
 #include <linux/rculist_nulls.h>
 
 #include <net/netfilter/nf_conntrack.h>
@@ -63,8 +64,6 @@
 struct nf_conn nf_conntrack_untracked __read_mostly;
 EXPORT_SYMBOL_GPL(nf_conntrack_untracked);
 
-static struct kmem_cache *nf_conntrack_cachep __read_mostly;
-
 static int nf_conntrack_hash_rnd_initted;
 static unsigned int nf_conntrack_hash_rnd;
 
@@ -86,9 +85,10 @@
 	return ((u64)h * size) >> 32;
 }
 
-static inline u_int32_t hash_conntrack(const struct nf_conntrack_tuple *tuple)
+static inline u_int32_t hash_conntrack(const struct net *net,
+				       const struct nf_conntrack_tuple *tuple)
 {
-	return __hash_conntrack(tuple, nf_conntrack_htable_size,
+	return __hash_conntrack(tuple, net->ct.htable_size,
 				nf_conntrack_hash_rnd);
 }
 
@@ -296,7 +296,7 @@
 {
 	struct nf_conntrack_tuple_hash *h;
 	struct hlist_nulls_node *n;
-	unsigned int hash = hash_conntrack(tuple);
+	unsigned int hash = hash_conntrack(net, tuple);
 
 	/* Disable BHs the entire time since we normally need to disable them
 	 * at least once for the stats anyway.
@@ -366,10 +366,11 @@
 
 void nf_conntrack_hash_insert(struct nf_conn *ct)
 {
+	struct net *net = nf_ct_net(ct);
 	unsigned int hash, repl_hash;
 
-	hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-	repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+	hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+	repl_hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
 
 	__nf_conntrack_hash_insert(ct, hash, repl_hash);
 }
@@ -397,8 +398,8 @@
 	if (CTINFO2DIR(ctinfo) != IP_CT_DIR_ORIGINAL)
 		return NF_ACCEPT;
 
-	hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
-	repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+	hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+	repl_hash = hash_conntrack(net, &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
 
 	/* We're not in hash table, and we refuse to set up related
 	   connections for unconfirmed conns.  But packet copies and
@@ -468,7 +469,7 @@
 	struct net *net = nf_ct_net(ignored_conntrack);
 	struct nf_conntrack_tuple_hash *h;
 	struct hlist_nulls_node *n;
-	unsigned int hash = hash_conntrack(tuple);
+	unsigned int hash = hash_conntrack(net, tuple);
 
 	/* Disable BHs the entire time since we need to disable them at
 	 * least once for the stats anyway.
@@ -503,7 +504,7 @@
 	int dropped = 0;
 
 	rcu_read_lock();
-	for (i = 0; i < nf_conntrack_htable_size; i++) {
+	for (i = 0; i < net->ct.htable_size; i++) {
 		hlist_nulls_for_each_entry_rcu(h, n, &net->ct.hash[hash],
 					 hnnode) {
 			tmp = nf_ct_tuplehash_to_ctrack(h);
@@ -523,7 +524,7 @@
 		if (cnt >= NF_CT_EVICTION_RANGE)
 			break;
 
-		hash = (hash + 1) % nf_conntrack_htable_size;
+		hash = (hash + 1) % net->ct.htable_size;
 	}
 	rcu_read_unlock();
 
@@ -557,7 +558,7 @@
 
 	if (nf_conntrack_max &&
 	    unlikely(atomic_read(&net->ct.count) > nf_conntrack_max)) {
-		unsigned int hash = hash_conntrack(orig);
+		unsigned int hash = hash_conntrack(net, orig);
 		if (!early_drop(net, hash)) {
 			atomic_dec(&net->ct.count);
 			if (net_ratelimit())
@@ -572,7 +573,7 @@
 	 * Do not use kmem_cache_zalloc(), as this cache uses
 	 * SLAB_DESTROY_BY_RCU.
 	 */
-	ct = kmem_cache_alloc(nf_conntrack_cachep, gfp);
+	ct = kmem_cache_alloc(net->ct.nf_conntrack_cachep, gfp);
 	if (ct == NULL) {
 		pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
 		atomic_dec(&net->ct.count);
@@ -611,7 +612,7 @@
 	nf_ct_ext_destroy(ct);
 	atomic_dec(&net->ct.count);
 	nf_ct_ext_free(ct);
-	kmem_cache_free(nf_conntrack_cachep, ct);
+	kmem_cache_free(net->ct.nf_conntrack_cachep, ct);
 }
 EXPORT_SYMBOL_GPL(nf_conntrack_free);
 
@@ -1014,7 +1015,7 @@
 	struct hlist_nulls_node *n;
 
 	spin_lock_bh(&nf_conntrack_lock);
-	for (; *bucket < nf_conntrack_htable_size; (*bucket)++) {
+	for (; *bucket < net->ct.htable_size; (*bucket)++) {
 		hlist_nulls_for_each_entry(h, n, &net->ct.hash[*bucket], hnnode) {
 			ct = nf_ct_tuplehash_to_ctrack(h);
 			if (iter(ct, data))
@@ -1113,9 +1114,12 @@
 
 static void nf_conntrack_cleanup_init_net(void)
 {
+	/* wait until all references to nf_conntrack_untracked are dropped */
+	while (atomic_read(&nf_conntrack_untracked.ct_general.use) > 1)
+		schedule();
+
 	nf_conntrack_helper_fini();
 	nf_conntrack_proto_fini();
-	kmem_cache_destroy(nf_conntrack_cachep);
 }
 
 static void nf_conntrack_cleanup_net(struct net *net)
@@ -1127,15 +1131,14 @@
 		schedule();
 		goto i_see_dead_people;
 	}
-	/* wait until all references to nf_conntrack_untracked are dropped */
-	while (atomic_read(&nf_conntrack_untracked.ct_general.use) > 1)
-		schedule();
 
 	nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
-			     nf_conntrack_htable_size);
+			     net->ct.htable_size);
 	nf_conntrack_ecache_fini(net);
 	nf_conntrack_acct_fini(net);
 	nf_conntrack_expect_fini(net);
+	kmem_cache_destroy(net->ct.nf_conntrack_cachep);
+	kfree(net->ct.slabname);
 	free_percpu(net->ct.stat);
 }
 
@@ -1190,10 +1193,12 @@
 {
 	int i, bucket, vmalloced, old_vmalloced;
 	unsigned int hashsize, old_size;
-	int rnd;
 	struct hlist_nulls_head *hash, *old_hash;
 	struct nf_conntrack_tuple_hash *h;
 
+	if (current->nsproxy->net_ns != &init_net)
+		return -EOPNOTSUPP;
+
 	/* On boot, we can set this without any fancy locking. */
 	if (!nf_conntrack_htable_size)
 		return param_set_uint(val, kp);
@@ -1206,33 +1211,29 @@
 	if (!hash)
 		return -ENOMEM;
 
-	/* We have to rehahs for the new table anyway, so we also can
-	 * use a newrandom seed */
-	get_random_bytes(&rnd, sizeof(rnd));
-
 	/* Lookups in the old hash might happen in parallel, which means we
 	 * might get false negatives during connection lookup. New connections
 	 * created because of a false negative won't make it into the hash
 	 * though since that required taking the lock.
 	 */
 	spin_lock_bh(&nf_conntrack_lock);
-	for (i = 0; i < nf_conntrack_htable_size; i++) {
+	for (i = 0; i < init_net.ct.htable_size; i++) {
 		while (!hlist_nulls_empty(&init_net.ct.hash[i])) {
 			h = hlist_nulls_entry(init_net.ct.hash[i].first,
 					struct nf_conntrack_tuple_hash, hnnode);
 			hlist_nulls_del_rcu(&h->hnnode);
-			bucket = __hash_conntrack(&h->tuple, hashsize, rnd);
+			bucket = __hash_conntrack(&h->tuple, hashsize,
+						  nf_conntrack_hash_rnd);
 			hlist_nulls_add_head_rcu(&h->hnnode, &hash[bucket]);
 		}
 	}
-	old_size = nf_conntrack_htable_size;
+	old_size = init_net.ct.htable_size;
 	old_vmalloced = init_net.ct.hash_vmalloc;
 	old_hash = init_net.ct.hash;
 
-	nf_conntrack_htable_size = hashsize;
+	init_net.ct.htable_size = nf_conntrack_htable_size = hashsize;
 	init_net.ct.hash_vmalloc = vmalloced;
 	init_net.ct.hash = hash;
-	nf_conntrack_hash_rnd = rnd;
 	spin_unlock_bh(&nf_conntrack_lock);
 
 	nf_ct_free_hashtable(old_hash, old_vmalloced, old_size);
@@ -1271,15 +1272,6 @@
 	       NF_CONNTRACK_VERSION, nf_conntrack_htable_size,
 	       nf_conntrack_max);
 
-	nf_conntrack_cachep = kmem_cache_create("nf_conntrack",
-						sizeof(struct nf_conn),
-						0, SLAB_DESTROY_BY_RCU, NULL);
-	if (!nf_conntrack_cachep) {
-		printk(KERN_ERR "Unable to create nf_conn slab cache\n");
-		ret = -ENOMEM;
-		goto err_cache;
-	}
-
 	ret = nf_conntrack_proto_init();
 	if (ret < 0)
 		goto err_proto;
@@ -1288,13 +1280,19 @@
 	if (ret < 0)
 		goto err_helper;
 
+	/* Set up fake conntrack: to never be deleted, not in any hashes */
+#ifdef CONFIG_NET_NS
+	nf_conntrack_untracked.ct_net = &init_net;
+#endif
+	atomic_set(&nf_conntrack_untracked.ct_general.use, 1);
+	/*  - and look it like as a confirmed connection */
+	set_bit(IPS_CONFIRMED_BIT, &nf_conntrack_untracked.status);
+
 	return 0;
 
 err_helper:
 	nf_conntrack_proto_fini();
 err_proto:
-	kmem_cache_destroy(nf_conntrack_cachep);
-err_cache:
 	return ret;
 }
 
@@ -1316,7 +1314,24 @@
 		ret = -ENOMEM;
 		goto err_stat;
 	}
-	net->ct.hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size,
+
+	net->ct.slabname = kasprintf(GFP_KERNEL, "nf_conntrack_%p", net);
+	if (!net->ct.slabname) {
+		ret = -ENOMEM;
+		goto err_slabname;
+	}
+
+	net->ct.nf_conntrack_cachep = kmem_cache_create(net->ct.slabname,
+							sizeof(struct nf_conn), 0,
+							SLAB_DESTROY_BY_RCU, NULL);
+	if (!net->ct.nf_conntrack_cachep) {
+		printk(KERN_ERR "Unable to create nf_conn slab cache\n");
+		ret = -ENOMEM;
+		goto err_cache;
+	}
+
+	net->ct.htable_size = nf_conntrack_htable_size;
+	net->ct.hash = nf_ct_alloc_hashtable(&net->ct.htable_size,
 					     &net->ct.hash_vmalloc, 1);
 	if (!net->ct.hash) {
 		ret = -ENOMEM;
@@ -1333,15 +1348,6 @@
 	if (ret < 0)
 		goto err_ecache;
 
-	/* Set up fake conntrack:
-	    - to never be deleted, not in any hashes */
-#ifdef CONFIG_NET_NS
-	nf_conntrack_untracked.ct_net = &init_net;
-#endif
-	atomic_set(&nf_conntrack_untracked.ct_general.use, 1);
-	/*  - and look it like as a confirmed connection */
-	set_bit(IPS_CONFIRMED_BIT, &nf_conntrack_untracked.status);
-
 	return 0;
 
 err_ecache:
@@ -1350,8 +1356,12 @@
 	nf_conntrack_expect_fini(net);
 err_expect:
 	nf_ct_free_hashtable(net->ct.hash, net->ct.hash_vmalloc,
-			     nf_conntrack_htable_size);
+			     net->ct.htable_size);
 err_hash:
+	kmem_cache_destroy(net->ct.nf_conntrack_cachep);
+err_cache:
+	kfree(net->ct.slabname);
+err_slabname:
 	free_percpu(net->ct.stat);
 err_stat:
 	return ret;
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index fdf5d2a..2f25ff6 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -569,7 +569,7 @@
 #endif /* CONFIG_PROC_FS */
 }
 
-module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0600);
+module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0400);
 
 int nf_conntrack_expect_init(struct net *net)
 {
@@ -577,7 +577,7 @@
 
 	if (net_eq(net, &init_net)) {
 		if (!nf_ct_expect_hsize) {
-			nf_ct_expect_hsize = nf_conntrack_htable_size / 256;
+			nf_ct_expect_hsize = net->ct.htable_size / 256;
 			if (!nf_ct_expect_hsize)
 				nf_ct_expect_hsize = 1;
 		}
diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c
index 65c2a7b..4b1a56b 100644
--- a/net/netfilter/nf_conntrack_helper.c
+++ b/net/netfilter/nf_conntrack_helper.c
@@ -192,7 +192,7 @@
 	/* Get rid of expecteds, set helpers to NULL. */
 	hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
 		unhelp(h, me);
-	for (i = 0; i < nf_conntrack_htable_size; i++) {
+	for (i = 0; i < net->ct.htable_size; i++) {
 		hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode)
 			unhelp(h, me);
 	}
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 59d8064..0ffe689 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -594,7 +594,7 @@
 
 	rcu_read_lock();
 	last = (struct nf_conn *)cb->args[1];
-	for (; cb->args[0] < nf_conntrack_htable_size; cb->args[0]++) {
+	for (; cb->args[0] < init_net.ct.htable_size; cb->args[0]++) {
 restart:
 		hlist_nulls_for_each_entry_rcu(h, n, &init_net.ct.hash[cb->args[0]],
 					 hnnode) {
@@ -1437,8 +1437,9 @@
 	struct nlattr *nest_parms;
 
 	memset(&m, 0xFF, sizeof(m));
-	m.src.u.all = mask->src.u.all;
 	memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3));
+	m.src.u.all = mask->src.u.all;
+	m.dst.protonum = tuple->dst.protonum;
 
 	nest_parms = nla_nest_start(skb, CTA_EXPECT_MASK | NLA_F_NESTED);
 	if (!nest_parms)
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 4b57216..023966b 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -376,7 +376,7 @@
 			dptr += hdr->len;
 		else if (hdr->cname && limit - dptr >= hdr->clen + 1 &&
 			 strnicmp(dptr, hdr->cname, hdr->clen) == 0 &&
-			 !isalpha(*(dptr + hdr->clen + 1)))
+			 !isalpha(*(dptr + hdr->clen)))
 			dptr += hdr->clen;
 		else
 			continue;
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 028aba6..e310f15 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -51,7 +51,7 @@
 	struct hlist_nulls_node *n;
 
 	for (st->bucket = 0;
-	     st->bucket < nf_conntrack_htable_size;
+	     st->bucket < net->ct.htable_size;
 	     st->bucket++) {
 		n = rcu_dereference(net->ct.hash[st->bucket].first);
 		if (!is_a_nulls(n))
@@ -69,7 +69,7 @@
 	head = rcu_dereference(head->next);
 	while (is_a_nulls(head)) {
 		if (likely(get_nulls_value(head) == st->bucket)) {
-			if (++st->bucket >= nf_conntrack_htable_size)
+			if (++st->bucket >= net->ct.htable_size)
 				return NULL;
 		}
 		head = rcu_dereference(net->ct.hash[st->bucket].first);
@@ -355,7 +355,7 @@
 	},
 	{
 		.procname       = "nf_conntrack_buckets",
-		.data           = &nf_conntrack_htable_size,
+		.data           = &init_net.ct.htable_size,
 		.maxlen         = sizeof(unsigned int),
 		.mode           = 0444,
 		.proc_handler   = proc_dointvec,
@@ -421,6 +421,7 @@
 		goto out_kmemdup;
 
 	table[1].data = &net->ct.count;
+	table[2].data = &net->ct.htable_size;
 	table[3].data = &net->ct.sysctl_checksum;
 	table[4].data = &net->ct.sysctl_log_invalid;
 
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index a4957bf..4c5972b 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -455,9 +455,14 @@
 	if (nl_table[protocol].registered &&
 	    try_module_get(nl_table[protocol].module))
 		module = nl_table[protocol].module;
+	else
+		err = -EPROTONOSUPPORT;
 	cb_mutex = nl_table[protocol].cb_mutex;
 	netlink_unlock_table();
 
+	if (err < 0)
+		goto out;
+
 	err = __netlink_create(net, sock, cb_mutex, protocol);
 	if (err < 0)
 		goto out_module;
diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c
index aacba76..e2e2d33 100644
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -843,12 +843,13 @@
 	dptr  = skb_push(skb, 1);
 	*dptr = AX25_P_NETROM;
 
-	ax25s = ax25_send_frame(skb, 256, (ax25_address *)dev->dev_addr, &nr_neigh->callsign, nr_neigh->digipeat, nr_neigh->dev);
-	if (nr_neigh->ax25 && ax25s) {
-		/* We were already holding this ax25_cb */
+	ax25s = nr_neigh->ax25;
+	nr_neigh->ax25 = ax25_send_frame(skb, 256,
+					 (ax25_address *)dev->dev_addr,
+					 &nr_neigh->callsign,
+					 nr_neigh->digipeat, nr_neigh->dev);
+	if (ax25s)
 		ax25_cb_put(ax25s);
-	}
-	nr_neigh->ax25 = ax25s;
 
 	dev_put(dev);
 	ret = (nr_neigh->ax25 != NULL);
diff --git a/net/rose/rose_link.c b/net/rose/rose_link.c
index bd86a63..5ef5f69 100644
--- a/net/rose/rose_link.c
+++ b/net/rose/rose_link.c
@@ -101,13 +101,17 @@
 static int rose_send_frame(struct sk_buff *skb, struct rose_neigh *neigh)
 {
 	ax25_address *rose_call;
+	ax25_cb *ax25s;
 
 	if (ax25cmp(&rose_callsign, &null_ax25_address) == 0)
 		rose_call = (ax25_address *)neigh->dev->dev_addr;
 	else
 		rose_call = &rose_callsign;
 
+	ax25s = neigh->ax25;
 	neigh->ax25 = ax25_send_frame(skb, 260, rose_call, &neigh->callsign, neigh->digipeat, neigh->dev);
+	if (ax25s)
+		ax25_cb_put(ax25s);
 
 	return (neigh->ax25 != NULL);
 }
@@ -120,13 +124,17 @@
 static int rose_link_up(struct rose_neigh *neigh)
 {
 	ax25_address *rose_call;
+	ax25_cb *ax25s;
 
 	if (ax25cmp(&rose_callsign, &null_ax25_address) == 0)
 		rose_call = (ax25_address *)neigh->dev->dev_addr;
 	else
 		rose_call = &rose_callsign;
 
+	ax25s = neigh->ax25;
 	neigh->ax25 = ax25_find_cb(rose_call, &neigh->callsign, neigh->digipeat, neigh->dev);
+	if (ax25s)
+		ax25_cb_put(ax25s);
 
 	return (neigh->ax25 != NULL);
 }
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index 795c4b0..70a0b3b 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -235,6 +235,8 @@
 
 	if ((s = rose_neigh_list) == rose_neigh) {
 		rose_neigh_list = rose_neigh->next;
+		if (rose_neigh->ax25)
+			ax25_cb_put(rose_neigh->ax25);
 		kfree(rose_neigh->digipeat);
 		kfree(rose_neigh);
 		return;
@@ -243,6 +245,8 @@
 	while (s != NULL && s->next != NULL) {
 		if (s->next == rose_neigh) {
 			s->next = rose_neigh->next;
+			if (rose_neigh->ax25)
+				ax25_cb_put(rose_neigh->ax25);
 			kfree(rose_neigh->digipeat);
 			kfree(rose_neigh);
 			return;
@@ -812,6 +816,7 @@
 
 	if (rose_neigh != NULL) {
 		rose_neigh->ax25 = NULL;
+		ax25_cb_put(ax25);
 
 		rose_del_route_by_neigh(rose_neigh);
 		rose_kill_by_neigh(rose_neigh);
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index 929218a4..21f9c76 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -433,7 +433,7 @@
 	  module.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called police.
+	  module will be called act_police.
 
 config NET_ACT_GACT
         tristate "Generic actions"
@@ -443,7 +443,7 @@
 	  accepting packets.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called gact.
+	  module will be called act_gact.
 
 config GACT_PROB
         bool "Probability support"
@@ -459,7 +459,7 @@
 	  other devices.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called mirred.
+	  module will be called act_mirred.
 
 config NET_ACT_IPT
         tristate "IPtables targets"
@@ -469,7 +469,7 @@
 	  classification.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called ipt.
+	  module will be called act_ipt.
 
 config NET_ACT_NAT
         tristate "Stateless NAT"
@@ -479,7 +479,7 @@
 	  netfilter for NAT unless you know what you are doing.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called nat.
+	  module will be called act_nat.
 
 config NET_ACT_PEDIT
         tristate "Packet Editing"
@@ -488,7 +488,7 @@
 	  Say Y here if you want to mangle the content of packets.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called pedit.
+	  module will be called act_pedit.
 
 config NET_ACT_SIMP
         tristate "Simple Example (Debug)"
@@ -502,7 +502,7 @@
 	  If unsure, say N.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called simple.
+	  module will be called act_simple.
 
 config NET_ACT_SKBEDIT
         tristate "SKB Editing"
@@ -513,7 +513,7 @@
 	  If unsure, say N.
 
 	  To compile this code as a module, choose M here: the
-	  module will be called skbedit.
+	  module will be called act_skbedit.
 
 config NET_CLS_IND
 	bool "Incoming device classification"
diff --git a/net/wireless/core.c b/net/wireless/core.c
index c2a2c56..92b8124 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -745,9 +745,9 @@
 			mutex_unlock(&rdev->devlist_mtx);
 			dev_put(dev);
 		}
-#ifdef CONFIG_CFG80211_WEXT
 		cfg80211_lock_rdev(rdev);
 		mutex_lock(&rdev->devlist_mtx);
+#ifdef CONFIG_CFG80211_WEXT
 		wdev_lock(wdev);
 		switch (wdev->iftype) {
 		case NL80211_IFTYPE_ADHOC:
@@ -760,10 +760,10 @@
 			break;
 		}
 		wdev_unlock(wdev);
+#endif
 		rdev->opencount++;
 		mutex_unlock(&rdev->devlist_mtx);
 		cfg80211_unlock_rdev(rdev);
-#endif
 		break;
 	case NETDEV_UNREGISTER:
 		/*
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index baa898a..7a0754c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1690,7 +1690,7 @@
 	request->wiphy_idx = WIPHY_IDX_STALE;
 	request->alpha2[0] = alpha2[0];
 	request->alpha2[1] = alpha2[1];
-	request->initiator = NL80211_REGDOM_SET_BY_USER,
+	request->initiator = NL80211_REGDOM_SET_BY_USER;
 
 	queue_regulatory_request(request);
 
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 2333d78..dc0fc49 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -655,6 +655,7 @@
 	memset(&wrqu, 0, sizeof(wrqu));
 	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+	wdev->wext.connect.ssid_len = 0;
 #endif
 }
 
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 4725a54..0ecb16a 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -469,16 +469,16 @@
 	return 0;
 }
 
-void xfrm_spd_getinfo(struct xfrmk_spdinfo *si)
+void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si)
 {
 	read_lock_bh(&xfrm_policy_lock);
-	si->incnt = init_net.xfrm.policy_count[XFRM_POLICY_IN];
-	si->outcnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT];
-	si->fwdcnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD];
-	si->inscnt = init_net.xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX];
-	si->outscnt = init_net.xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX];
-	si->fwdscnt = init_net.xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX];
-	si->spdhcnt = init_net.xfrm.policy_idx_hmask;
+	si->incnt = net->xfrm.policy_count[XFRM_POLICY_IN];
+	si->outcnt = net->xfrm.policy_count[XFRM_POLICY_OUT];
+	si->fwdcnt = net->xfrm.policy_count[XFRM_POLICY_FWD];
+	si->inscnt = net->xfrm.policy_count[XFRM_POLICY_IN+XFRM_POLICY_MAX];
+	si->outscnt = net->xfrm.policy_count[XFRM_POLICY_OUT+XFRM_POLICY_MAX];
+	si->fwdscnt = net->xfrm.policy_count[XFRM_POLICY_FWD+XFRM_POLICY_MAX];
+	si->spdhcnt = net->xfrm.policy_idx_hmask;
 	si->spdhmcnt = xfrm_policy_hashmax;
 	read_unlock_bh(&xfrm_policy_lock);
 }
@@ -1309,15 +1309,28 @@
 	return tos;
 }
 
-static inline struct xfrm_dst *xfrm_alloc_dst(int family)
+static inline struct xfrm_dst *xfrm_alloc_dst(struct net *net, int family)
 {
 	struct xfrm_policy_afinfo *afinfo = xfrm_policy_get_afinfo(family);
+	struct dst_ops *dst_ops;
 	struct xfrm_dst *xdst;
 
 	if (!afinfo)
 		return ERR_PTR(-EINVAL);
 
-	xdst = dst_alloc(afinfo->dst_ops) ?: ERR_PTR(-ENOBUFS);
+	switch (family) {
+	case AF_INET:
+		dst_ops = &net->xfrm.xfrm4_dst_ops;
+		break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	case AF_INET6:
+		dst_ops = &net->xfrm.xfrm6_dst_ops;
+		break;
+#endif
+	default:
+		BUG();
+	}
+	xdst = dst_alloc(dst_ops) ?: ERR_PTR(-ENOBUFS);
 
 	xfrm_policy_put_afinfo(afinfo);
 
@@ -1366,6 +1379,7 @@
 					    struct flowi *fl,
 					    struct dst_entry *dst)
 {
+	struct net *net = xp_net(policy);
 	unsigned long now = jiffies;
 	struct net_device *dev;
 	struct dst_entry *dst_prev = NULL;
@@ -1389,7 +1403,7 @@
 	dst_hold(dst);
 
 	for (; i < nx; i++) {
-		struct xfrm_dst *xdst = xfrm_alloc_dst(family);
+		struct xfrm_dst *xdst = xfrm_alloc_dst(net, family);
 		struct dst_entry *dst1 = &xdst->u.dst;
 
 		err = PTR_ERR(xdst);
@@ -2279,6 +2293,7 @@
 
 int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
 {
+	struct net *net;
 	int err = 0;
 	if (unlikely(afinfo == NULL))
 		return -EINVAL;
@@ -2302,6 +2317,27 @@
 		xfrm_policy_afinfo[afinfo->family] = afinfo;
 	}
 	write_unlock_bh(&xfrm_policy_afinfo_lock);
+
+	rtnl_lock();
+	for_each_net(net) {
+		struct dst_ops *xfrm_dst_ops;
+
+		switch (afinfo->family) {
+		case AF_INET:
+			xfrm_dst_ops = &net->xfrm.xfrm4_dst_ops;
+			break;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+		case AF_INET6:
+			xfrm_dst_ops = &net->xfrm.xfrm6_dst_ops;
+			break;
+#endif
+		default:
+			BUG();
+		}
+		*xfrm_dst_ops = *afinfo->dst_ops;
+	}
+	rtnl_unlock();
+
 	return err;
 }
 EXPORT_SYMBOL(xfrm_policy_register_afinfo);
@@ -2332,6 +2368,22 @@
 }
 EXPORT_SYMBOL(xfrm_policy_unregister_afinfo);
 
+static void __net_init xfrm_dst_ops_init(struct net *net)
+{
+	struct xfrm_policy_afinfo *afinfo;
+
+	read_lock_bh(&xfrm_policy_afinfo_lock);
+	afinfo = xfrm_policy_afinfo[AF_INET];
+	if (afinfo)
+		net->xfrm.xfrm4_dst_ops = *afinfo->dst_ops;
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	afinfo = xfrm_policy_afinfo[AF_INET6];
+	if (afinfo)
+		net->xfrm.xfrm6_dst_ops = *afinfo->dst_ops;
+#endif
+	read_unlock_bh(&xfrm_policy_afinfo_lock);
+}
+
 static struct xfrm_policy_afinfo *xfrm_policy_get_afinfo(unsigned short family)
 {
 	struct xfrm_policy_afinfo *afinfo;
@@ -2494,6 +2546,7 @@
 	rv = xfrm_policy_init(net);
 	if (rv < 0)
 		goto out_policy;
+	xfrm_dst_ops_init(net);
 	rv = xfrm_sysctl_init(net);
 	if (rv < 0)
 		goto out_sysctl;
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index d847f1a..f445ea1 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -641,11 +641,11 @@
 }
 EXPORT_SYMBOL(xfrm_state_flush);
 
-void xfrm_sad_getinfo(struct xfrmk_sadinfo *si)
+void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si)
 {
 	spin_lock_bh(&xfrm_state_lock);
-	si->sadcnt = init_net.xfrm.state_num;
-	si->sadhcnt = init_net.xfrm.state_hmask;
+	si->sadcnt = net->xfrm.state_num;
+	si->sadhcnt = net->xfrm.state_hmask;
 	si->sadhmcnt = xfrm_state_hashmax;
 	spin_unlock_bh(&xfrm_state_lock);
 }
@@ -1102,7 +1102,7 @@
 	int err = -ENOMEM;
 	struct xfrm_state *x = xfrm_state_alloc(net);
 	if (!x)
-		goto error;
+		goto out;
 
 	memcpy(&x->id, &orig->id, sizeof(x->id));
 	memcpy(&x->sel, &orig->sel, sizeof(x->sel));
@@ -1160,16 +1160,10 @@
 	return x;
 
  error:
+	xfrm_state_put(x);
+out:
 	if (errp)
 		*errp = err;
-	if (x) {
-		kfree(x->aalg);
-		kfree(x->ealg);
-		kfree(x->calg);
-		kfree(x->encap);
-		kfree(x->coaddr);
-	}
-	kfree(x);
 	return NULL;
 }
 
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 1ada618..d5a7129 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -781,7 +781,8 @@
 	       + nla_total_size(sizeof(struct xfrmu_spdhinfo));
 }
 
-static int build_spdinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags)
+static int build_spdinfo(struct sk_buff *skb, struct net *net,
+			 u32 pid, u32 seq, u32 flags)
 {
 	struct xfrmk_spdinfo si;
 	struct xfrmu_spdinfo spc;
@@ -795,7 +796,7 @@
 
 	f = nlmsg_data(nlh);
 	*f = flags;
-	xfrm_spd_getinfo(&si);
+	xfrm_spd_getinfo(net, &si);
 	spc.incnt = si.incnt;
 	spc.outcnt = si.outcnt;
 	spc.fwdcnt = si.fwdcnt;
@@ -828,7 +829,7 @@
 	if (r_skb == NULL)
 		return -ENOMEM;
 
-	if (build_spdinfo(r_skb, spid, seq, *flags) < 0)
+	if (build_spdinfo(r_skb, net, spid, seq, *flags) < 0)
 		BUG();
 
 	return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid);
@@ -841,7 +842,8 @@
 	       + nla_total_size(4); /* XFRMA_SAD_CNT */
 }
 
-static int build_sadinfo(struct sk_buff *skb, u32 pid, u32 seq, u32 flags)
+static int build_sadinfo(struct sk_buff *skb, struct net *net,
+			 u32 pid, u32 seq, u32 flags)
 {
 	struct xfrmk_sadinfo si;
 	struct xfrmu_sadhinfo sh;
@@ -854,7 +856,7 @@
 
 	f = nlmsg_data(nlh);
 	*f = flags;
-	xfrm_sad_getinfo(&si);
+	xfrm_sad_getinfo(net, &si);
 
 	sh.sadhmcnt = si.sadhmcnt;
 	sh.sadhcnt = si.sadhcnt;
@@ -882,7 +884,7 @@
 	if (r_skb == NULL)
 		return -ENOMEM;
 
-	if (build_sadinfo(r_skb, spid, seq, *flags) < 0)
+	if (build_sadinfo(r_skb, net, spid, seq, *flags) < 0)
 		BUG();
 
 	return nlmsg_unicast(net->xfrm.nlsk, r_skb, spid);
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 0fe48cd..f9bdf26 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -219,8 +219,13 @@
 	fsize=$$(stat -c "%s" $$F);					\
 	dec_size=$$(expr $$dec_size + $$fsize);				\
 done;									\
-printf "%08x" $$dec_size |						\
-	sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'	\
+printf "%08x\n" $$dec_size |						\
+	sed 's/\(..\)/\1 /g' | {					\
+		read ch0 ch1 ch2 ch3;					\
+		for ch in $$ch3 $$ch2 $$ch1 $$ch0; do			\
+			printf '%s%03o' '\\' $$((0x$$ch)); 		\
+		done;							\
+	}								\
 )
 
 quiet_cmd_bzip2 = BZIP2   $@
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 090f248..2f3230d 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -74,8 +74,8 @@
 my %VCS_cmds_git = (
     "execute_cmd" => \&git_execute_cmd,
     "available" => '(which("git") ne "") && (-d ".git")',
-    "find_signers_cmd" => "git log --since=\$email_git_since -- \$file",
-    "find_commit_signers_cmd" => "git log -1 \$commit",
+    "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file",
+    "find_commit_signers_cmd" => "git log --no-color -1 \$commit",
     "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file",
     "blame_file_cmd" => "git blame -l \$file",
     "commit_pattern" => "^commit [0-9a-f]{40,40}",
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 5f0fcb7..e950f9c 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -154,11 +154,11 @@
 	if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
 		$target = $1;
 	}
-	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
 		$function = $1;
 		$func_offset = $2;
 	}
-	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
 		$function = $1;
 		$func_offset = $2;
 	}
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 6f426af..220213e 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -804,7 +804,7 @@
 	match = strstr(symbol, name);
 	if (!match)
 		return 0;
-	return match[strlen(symbol)] == '\0';
+	return match[strlen(name)] == '\0';
 }
 
 static void do_table(void *symval, unsigned long size,
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 92f09fe..ea6f6e3 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -194,7 +194,7 @@
     }
 }
 
-if ($arch eq "x86") {
+if ($arch =~ /(x86(_64)?)|(i386)/) {
     if ($bits == 64) {
 	$arch = "x86_64";
     } else {
diff --git a/security/inode.c b/security/inode.c
index f7496c6..c3a7938 100644
--- a/security/inode.c
+++ b/security/inode.c
@@ -156,15 +156,8 @@
 	 * block. A pointer to that is in the struct vfsmount that we
 	 * have around.
 	 */
-	if (!parent ) {
-		if (mount && mount->mnt_sb) {
-			parent = mount->mnt_sb->s_root;
-		}
-	}
-	if (!parent) {
-		pr_debug("securityfs: Ah! can not find a parent!\n");
-		return -EFAULT;
-	}
+	if (!parent)
+		parent = mount->mnt_sb->s_root;
 
 	mutex_lock(&parent->d_inode->i_mutex);
 	*dentry = lookup_one_len(name, parent, strlen(name));
diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index c41afe6..47fb65d 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -65,7 +65,6 @@
 			 const char *cause, int result, int info);
 
 /* Internal IMA function definitions */
-void ima_iintcache_init(void);
 int ima_init(void);
 void ima_cleanup(void);
 int ima_fs_init(void);
@@ -131,7 +130,7 @@
 void iint_rcu_free(struct rcu_head *rcu);
 
 /* IMA policy related functions */
-enum ima_hooks { PATH_CHECK = 1, FILE_MMAP, BPRM_CHECK };
+enum ima_hooks { FILE_CHECK = 1, FILE_MMAP, BPRM_CHECK };
 
 int ima_match_policy(struct inode *inode, enum ima_hooks func, int mask);
 void ima_init_policy(void);
diff --git a/security/integrity/ima/ima_api.c b/security/integrity/ima/ima_api.c
index 3cd58b6..2a5e0bc 100644
--- a/security/integrity/ima/ima_api.c
+++ b/security/integrity/ima/ima_api.c
@@ -95,12 +95,12 @@
  * ima_must_measure - measure decision based on policy.
  * @inode: pointer to inode to measure
  * @mask: contains the permission mask (MAY_READ, MAY_WRITE, MAY_EXECUTE)
- * @function: calling function (PATH_CHECK, BPRM_CHECK, FILE_MMAP)
+ * @function: calling function (FILE_CHECK, BPRM_CHECK, FILE_MMAP)
  *
  * The policy is defined in terms of keypairs:
  * 		subj=, obj=, type=, func=, mask=, fsmagic=
  *	subj,obj, and type: are LSM specific.
- * 	func: PATH_CHECK | BPRM_CHECK | FILE_MMAP
+ * 	func: FILE_CHECK | BPRM_CHECK | FILE_MMAP
  * 	mask: contains the permission mask
  *	fsmagic: hex value
  *
diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c
index fa592ff..0d83edc 100644
--- a/security/integrity/ima/ima_iint.c
+++ b/security/integrity/ima/ima_iint.c
@@ -52,9 +52,6 @@
 	struct ima_iint_cache *iint = NULL;
 	int rc = 0;
 
-	if (!ima_initialized)
-		return 0;
-
 	iint = kmem_cache_alloc(iint_cache, GFP_NOFS);
 	if (!iint)
 		return -ENOMEM;
@@ -118,8 +115,6 @@
 {
 	struct ima_iint_cache *iint;
 
-	if (!ima_initialized)
-		return;
 	spin_lock(&ima_iint_lock);
 	iint = radix_tree_delete(&ima_iint_store, (unsigned long)inode);
 	spin_unlock(&ima_iint_lock);
@@ -141,9 +136,11 @@
 	kref_set(&iint->refcount, 1);
 }
 
-void __init ima_iintcache_init(void)
+static int __init ima_iintcache_init(void)
 {
 	iint_cache =
 	    kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0,
 			      SLAB_PANIC, init_once);
+	return 0;
 }
+security_initcall(ima_iintcache_init);
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index a89f44d..294b005 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -14,7 +14,7 @@
  *
  * File: ima_main.c
  *	implements the IMA hooks: ima_bprm_check, ima_file_mmap,
- *	and ima_path_check.
+ *	and ima_file_check.
  */
 #include <linux/module.h>
 #include <linux/file.h>
@@ -84,6 +84,36 @@
 	return found;
 }
 
+/* ima_read_write_check - reflect possible reading/writing errors in the PCR.
+ *
+ * When opening a file for read, if the file is already open for write,
+ * the file could change, resulting in a file measurement error.
+ *
+ * Opening a file for write, if the file is already open for read, results
+ * in a time of measure, time of use (ToMToU) error.
+ *
+ * In either case invalidate the PCR.
+ */
+enum iint_pcr_error { TOMTOU, OPEN_WRITERS };
+static void ima_read_write_check(enum iint_pcr_error error,
+				 struct ima_iint_cache *iint,
+				 struct inode *inode,
+				 const unsigned char *filename)
+{
+	switch (error) {
+	case TOMTOU:
+		if (iint->readcount > 0)
+			ima_add_violation(inode, filename, "invalid_pcr",
+					  "ToMToU");
+		break;
+	case OPEN_WRITERS:
+		if (iint->writecount > 0)
+			ima_add_violation(inode, filename, "invalid_pcr",
+					  "open_writers");
+		break;
+	}
+}
+
 /*
  * Update the counts given an fmode_t
  */
@@ -99,6 +129,47 @@
 }
 
 /*
+ * ima_counts_get - increment file counts
+ *
+ * Maintain read/write counters for all files, but only
+ * invalidate the PCR for measured files:
+ * 	- Opening a file for write when already open for read,
+ *	  results in a time of measure, time of use (ToMToU) error.
+ *	- Opening a file for read when already open for write,
+ * 	  could result in a file measurement error.
+ *
+ */
+void ima_counts_get(struct file *file)
+{
+	struct dentry *dentry = file->f_path.dentry;
+	struct inode *inode = dentry->d_inode;
+	fmode_t mode = file->f_mode;
+	struct ima_iint_cache *iint;
+	int rc;
+
+	if (!ima_initialized || !S_ISREG(inode->i_mode))
+		return;
+	iint = ima_iint_find_get(inode);
+	if (!iint)
+		return;
+	mutex_lock(&iint->mutex);
+	rc = ima_must_measure(iint, inode, MAY_READ, FILE_CHECK);
+	if (rc < 0)
+		goto out;
+
+	if (mode & FMODE_WRITE) {
+		ima_read_write_check(TOMTOU, iint, inode, dentry->d_name.name);
+		goto out;
+	}
+	ima_read_write_check(OPEN_WRITERS, iint, inode, dentry->d_name.name);
+out:
+	ima_inc_counts(iint, file->f_mode);
+	mutex_unlock(&iint->mutex);
+
+	kref_put(&iint->refcount, iint_free);
+}
+
+/*
  * Decrement ima counts
  */
 static void ima_dec_counts(struct ima_iint_cache *iint, struct inode *inode,
@@ -153,123 +224,6 @@
 	kref_put(&iint->refcount, iint_free);
 }
 
-/* ima_read_write_check - reflect possible reading/writing errors in the PCR.
- *
- * When opening a file for read, if the file is already open for write,
- * the file could change, resulting in a file measurement error.
- *
- * Opening a file for write, if the file is already open for read, results
- * in a time of measure, time of use (ToMToU) error.
- *
- * In either case invalidate the PCR.
- */
-enum iint_pcr_error { TOMTOU, OPEN_WRITERS };
-static void ima_read_write_check(enum iint_pcr_error error,
-				 struct ima_iint_cache *iint,
-				 struct inode *inode,
-				 const unsigned char *filename)
-{
-	switch (error) {
-	case TOMTOU:
-		if (iint->readcount > 0)
-			ima_add_violation(inode, filename, "invalid_pcr",
-					  "ToMToU");
-		break;
-	case OPEN_WRITERS:
-		if (iint->writecount > 0)
-			ima_add_violation(inode, filename, "invalid_pcr",
-					  "open_writers");
-		break;
-	}
-}
-
-static int get_path_measurement(struct ima_iint_cache *iint, struct file *file,
-				const unsigned char *filename)
-{
-	int rc = 0;
-
-	ima_inc_counts(iint, file->f_mode);
-
-	rc = ima_collect_measurement(iint, file);
-	if (!rc)
-		ima_store_measurement(iint, file, filename);
-	return rc;
-}
-
-/**
- * ima_path_check - based on policy, collect/store measurement.
- * @path: contains a pointer to the path to be measured
- * @mask: contains MAY_READ, MAY_WRITE or MAY_EXECUTE
- *
- * Measure the file being open for readonly, based on the
- * ima_must_measure() policy decision.
- *
- * Keep read/write counters for all files, but only
- * invalidate the PCR for measured files:
- * 	- Opening a file for write when already open for read,
- *	  results in a time of measure, time of use (ToMToU) error.
- *	- Opening a file for read when already open for write,
- * 	  could result in a file measurement error.
- *
- * Always return 0 and audit dentry_open failures.
- * (Return code will be based upon measurement appraisal.)
- */
-int ima_path_check(struct path *path, int mask)
-{
-	struct inode *inode = path->dentry->d_inode;
-	struct ima_iint_cache *iint;
-	struct file *file = NULL;
-	int rc;
-
-	if (!ima_initialized || !S_ISREG(inode->i_mode))
-		return 0;
-	iint = ima_iint_find_get(inode);
-	if (!iint)
-		return 0;
-
-	mutex_lock(&iint->mutex);
-
-	rc = ima_must_measure(iint, inode, MAY_READ, PATH_CHECK);
-	if (rc < 0)
-		goto out;
-
-	if ((mask & MAY_WRITE) || (mask == 0))
-		ima_read_write_check(TOMTOU, iint, inode,
-				     path->dentry->d_name.name);
-
-	if ((mask & (MAY_WRITE | MAY_READ | MAY_EXEC)) != MAY_READ)
-		goto out;
-
-	ima_read_write_check(OPEN_WRITERS, iint, inode,
-			     path->dentry->d_name.name);
-	if (!(iint->flags & IMA_MEASURED)) {
-		struct dentry *dentry = dget(path->dentry);
-		struct vfsmount *mnt = mntget(path->mnt);
-
-		file = dentry_open(dentry, mnt, O_RDONLY | O_LARGEFILE,
-				   current_cred());
-		if (IS_ERR(file)) {
-			int audit_info = 0;
-
-			integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
-					    dentry->d_name.name,
-					    "add_measurement",
-					    "dentry_open failed",
-					    1, audit_info);
-			file = NULL;
-			goto out;
-		}
-		rc = get_path_measurement(iint, file, dentry->d_name.name);
-	}
-out:
-	mutex_unlock(&iint->mutex);
-	if (file)
-		fput(file);
-	kref_put(&iint->refcount, iint_free);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ima_path_check);
-
 static int process_measurement(struct file *file, const unsigned char *filename,
 			       int mask, int function)
 {
@@ -297,33 +251,6 @@
 	return rc;
 }
 
-/*
- * ima_counts_get - increment file counts
- *
- * - for IPC shm and shmat file.
- * - for nfsd exported files.
- *
- * Increment the counts for these files to prevent unnecessary
- * imbalance messages.
- */
-void ima_counts_get(struct file *file)
-{
-	struct inode *inode = file->f_dentry->d_inode;
-	struct ima_iint_cache *iint;
-
-	if (!ima_initialized || !S_ISREG(inode->i_mode))
-		return;
-	iint = ima_iint_find_get(inode);
-	if (!iint)
-		return;
-	mutex_lock(&iint->mutex);
-	ima_inc_counts(iint, file->f_mode);
-	mutex_unlock(&iint->mutex);
-
-	kref_put(&iint->refcount, iint_free);
-}
-EXPORT_SYMBOL_GPL(ima_counts_get);
-
 /**
  * ima_file_mmap - based on policy, collect/store measurement.
  * @file: pointer to the file to be measured (May be NULL)
@@ -369,11 +296,31 @@
 	return 0;
 }
 
+/**
+ * ima_path_check - based on policy, collect/store measurement.
+ * @file: pointer to the file to be measured
+ * @mask: contains MAY_READ, MAY_WRITE or MAY_EXECUTE
+ *
+ * Measure files based on the ima_must_measure() policy decision.
+ *
+ * Always return 0 and audit dentry_open failures.
+ * (Return code will be based upon measurement appraisal.)
+ */
+int ima_file_check(struct file *file, int mask)
+{
+	int rc;
+
+	rc = process_measurement(file, file->f_dentry->d_name.name,
+				 mask & (MAY_READ | MAY_WRITE | MAY_EXEC),
+				 FILE_CHECK);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ima_file_check);
+
 static int __init init_ima(void)
 {
 	int error;
 
-	ima_iintcache_init();
 	error = ima_init();
 	ima_initialized = 1;
 	return error;
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index e127839..4759d0f 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -67,7 +67,7 @@
 	 .flags = IMA_FUNC | IMA_MASK},
 	{.action = MEASURE,.func = BPRM_CHECK,.mask = MAY_EXEC,
 	 .flags = IMA_FUNC | IMA_MASK},
-	{.action = MEASURE,.func = PATH_CHECK,.mask = MAY_READ,.uid = 0,
+	{.action = MEASURE,.func = FILE_CHECK,.mask = MAY_READ,.uid = 0,
 	 .flags = IMA_FUNC | IMA_MASK | IMA_UID},
 };
 
@@ -282,8 +282,11 @@
 			break;
 		case Opt_func:
 			audit_log_format(ab, "func=%s ", args[0].from);
-			if (strcmp(args[0].from, "PATH_CHECK") == 0)
-				entry->func = PATH_CHECK;
+			if (strcmp(args[0].from, "FILE_CHECK") == 0)
+				entry->func = FILE_CHECK;
+			/* PATH_CHECK is for backwards compat */
+			else if (strcmp(args[0].from, "PATH_CHECK") == 0)
+				entry->func = FILE_CHECK;
 			else if (strcmp(args[0].from, "FILE_MMAP") == 0)
 				entry->func = FILE_MMAP;
 			else if (strcmp(args[0].from, "BPRM_CHECK") == 0)
diff --git a/security/security.c b/security/security.c
index 24e060b..122b748 100644
--- a/security/security.c
+++ b/security/security.c
@@ -666,8 +666,6 @@
 void security_file_free(struct file *file)
 {
 	security_ops->file_free_security(file);
-	if (file->f_dentry)
-		ima_file_free(file);
 }
 
 int security_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 8a00ade..2aceebf 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -80,9 +80,8 @@
 		return tomoyo_find_next_domain(bprm);
 	/*
 	 * Read permission is checked against interpreters using next domain.
-	 * '1' is the result of open_to_namei_flags(O_RDONLY).
 	 */
-	return tomoyo_check_open_permission(domain, &bprm->file->f_path, 1);
+	return tomoyo_check_open_permission(domain, &bprm->file->f_path, O_RDONLY);
 }
 
 static int tomoyo_path_truncate(struct path *path, loff_t length,
@@ -184,10 +183,6 @@
 static int tomoyo_dentry_open(struct file *f, const struct cred *cred)
 {
 	int flags = f->f_flags;
-
-	if ((flags + 1) & O_ACCMODE)
-		flags++;
-	flags |= f->f_flags & (O_APPEND | O_TRUNC);
 	/* Don't check read permission here if called from do_execve(). */
 	if (current->in_execve)
 		return 0;
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 7872a02..563d196 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -468,5 +468,5 @@
 	unregister_chrdev(major, "alsa");
 }
 
-module_init(alsa_sound_init)
-module_exit(alsa_sound_exit)
+subsys_initcall(alsa_sound_init);
+module_exit(alsa_sound_exit);
diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c
index 7fe1226..0c164e5 100644
--- a/sound/core/sound_oss.c
+++ b/sound/core/sound_oss.c
@@ -93,7 +93,7 @@
 	default:
 		return -EINVAL;
 	}
-	if (snd_BUG_ON(minor < 0 || minor >= SNDRV_OSS_MINORS))
+	if (minor < 0 || minor >= SNDRV_OSS_MINORS)
 		return -EINVAL;
 	return minor;
 }
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index cb65bd0..459c1f6 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -166,18 +166,7 @@
 
 static unsigned long atc_get_ptp_phys(struct ct_atc *atc, int index)
 {
-	struct ct_vm *vm;
-	void *kvirt_addr;
-	unsigned long phys_addr;
-
-	vm = atc->vm;
-	kvirt_addr = vm->get_ptp_virt(vm, index);
-	if (kvirt_addr == NULL)
-		phys_addr = (~0UL);
-	else
-		phys_addr = virt_to_phys(kvirt_addr);
-
-	return phys_addr;
+	return atc->vm->get_ptp_phys(atc->vm, index);
 }
 
 static unsigned int convert_format(snd_pcm_format_t snd_format)
@@ -1669,7 +1658,7 @@
 	}
 
 	/* Set up device virtual memory management object */
-	err = ct_vm_create(&atc->vm);
+	err = ct_vm_create(&atc->vm, pci);
 	if (err < 0)
 		goto error1;
 
diff --git a/sound/pci/ctxfi/ctvmem.c b/sound/pci/ctxfi/ctvmem.c
index 6b78752..65da6e4 100644
--- a/sound/pci/ctxfi/ctvmem.c
+++ b/sound/pci/ctxfi/ctvmem.c
@@ -138,7 +138,7 @@
 		return NULL;
 	}
 
-	ptp = vm->ptp[0];
+	ptp = (unsigned long *)vm->ptp[0].area;
 	pte_start = (block->addr >> CT_PAGE_SHIFT);
 	pages = block->size >> CT_PAGE_SHIFT;
 	for (i = 0; i < pages; i++) {
@@ -158,25 +158,25 @@
 }
 
 /* *
- * return the host (kmalloced) addr of the @index-th device
- * page talbe page on success, or NULL on failure.
- * The first returned NULL indicates the termination.
+ * return the host physical addr of the @index-th device
+ * page table page on success, or ~0UL on failure.
+ * The first returned ~0UL indicates the termination.
  * */
-static void *
-ct_get_ptp_virt(struct ct_vm *vm, int index)
+static dma_addr_t
+ct_get_ptp_phys(struct ct_vm *vm, int index)
 {
-	void *addr;
+	dma_addr_t addr;
 
-	addr = (index >= CT_PTP_NUM) ? NULL : vm->ptp[index];
+	addr = (index >= CT_PTP_NUM) ? ~0UL : vm->ptp[index].addr;
 
 	return addr;
 }
 
-int ct_vm_create(struct ct_vm **rvm)
+int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci)
 {
 	struct ct_vm *vm;
 	struct ct_vm_block *block;
-	int i;
+	int i, err = 0;
 
 	*rvm = NULL;
 
@@ -188,23 +188,21 @@
 
 	/* Allocate page table pages */
 	for (i = 0; i < CT_PTP_NUM; i++) {
-		vm->ptp[i] = kmalloc(PAGE_SIZE, GFP_KERNEL);
-		if (!vm->ptp[i])
+		err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
+					  snd_dma_pci_data(pci),
+					  PAGE_SIZE, &vm->ptp[i]);
+		if (err < 0)
 			break;
 	}
-	if (!i) {
+	if (err < 0) {
 		/* no page table pages are allocated */
-		kfree(vm);
+		ct_vm_destroy(vm);
 		return -ENOMEM;
 	}
 	vm->size = CT_ADDRS_PER_PAGE * i;
-	/* Initialise remaining ptps */
-	for (; i < CT_PTP_NUM; i++)
-		vm->ptp[i] = NULL;
-
 	vm->map = ct_vm_map;
 	vm->unmap = ct_vm_unmap;
-	vm->get_ptp_virt = ct_get_ptp_virt;
+	vm->get_ptp_phys = ct_get_ptp_phys;
 	INIT_LIST_HEAD(&vm->unused);
 	INIT_LIST_HEAD(&vm->used);
 	block = kzalloc(sizeof(*block), GFP_KERNEL);
@@ -242,7 +240,7 @@
 
 	/* free allocated page table pages */
 	for (i = 0; i < CT_PTP_NUM; i++)
-		kfree(vm->ptp[i]);
+		snd_dma_free_pages(&vm->ptp[i]);
 
 	vm->size = 0;
 
diff --git a/sound/pci/ctxfi/ctvmem.h b/sound/pci/ctxfi/ctvmem.h
index 01e4fd0..b23adfc 100644
--- a/sound/pci/ctxfi/ctvmem.h
+++ b/sound/pci/ctxfi/ctvmem.h
@@ -22,6 +22,8 @@
 
 #include <linux/mutex.h>
 #include <linux/list.h>
+#include <linux/pci.h>
+#include <sound/memalloc.h>
 
 /* The chip can handle the page table of 4k pages
  * (emu20k1 can handle even 8k pages, but we don't use it right now)
@@ -41,7 +43,7 @@
 
 /* Virtual memory management object for card device */
 struct ct_vm {
-	void *ptp[CT_PTP_NUM];		/* Device page table pages */
+	struct snd_dma_buffer ptp[CT_PTP_NUM];	/* Device page table pages */
 	unsigned int size;		/* Available addr space in bytes */
 	struct list_head unused;	/* List of unused blocks */
 	struct list_head used;		/* List of used blocks */
@@ -52,10 +54,10 @@
 				   int size);
 	/* Unmap device logical addr area. */
 	void (*unmap)(struct ct_vm *, struct ct_vm_block *block);
-	void *(*get_ptp_virt)(struct ct_vm *vm, int index);
+	dma_addr_t (*get_ptp_phys)(struct ct_vm *vm, int index);
 };
 
-int ct_vm_create(struct ct_vm **rvm);
+int ct_vm_create(struct ct_vm **rvm, struct pci_dev *pci);
 void ct_vm_destroy(struct ct_vm *vm);
 
 #endif /* CTVMEM_H */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index ec9c348..ff6da6f 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -426,6 +426,7 @@
 
 	/* flags */
 	int position_fix;
+	int poll_count;
 	unsigned int running :1;
 	unsigned int initialized :1;
 	unsigned int single_cmd :1;
@@ -506,7 +507,7 @@
 #define get_azx_dev(substream) (substream->runtime->private_data)
 
 static int azx_acquire_irq(struct azx *chip, int do_disconnect);
-
+static int azx_send_cmd(struct hda_bus *bus, unsigned int val);
 /*
  * Interface for HD codec
  */
@@ -664,11 +665,12 @@
 {
 	struct azx *chip = bus->private_data;
 	unsigned long timeout;
+	int do_poll = 0;
 
  again:
 	timeout = jiffies + msecs_to_jiffies(1000);
 	for (;;) {
-		if (chip->polling_mode) {
+		if (chip->polling_mode || do_poll) {
 			spin_lock_irq(&chip->reg_lock);
 			azx_update_rirb(chip);
 			spin_unlock_irq(&chip->reg_lock);
@@ -676,6 +678,9 @@
 		if (!chip->rirb.cmds[addr]) {
 			smp_rmb();
 			bus->rirb_error = 0;
+
+			if (!do_poll)
+				chip->poll_count = 0;
 			return chip->rirb.res[addr]; /* the last value */
 		}
 		if (time_after(jiffies, timeout))
@@ -688,6 +693,16 @@
 		}
 	}
 
+	if (!chip->polling_mode && chip->poll_count < 2) {
+		snd_printdd(SFX "azx_get_response timeout, "
+			   "polling the codec once: last cmd=0x%08x\n",
+			   chip->last_cmd[addr]);
+		do_poll = 1;
+		chip->poll_count++;
+		goto again;
+	}
+
+
 	if (!chip->polling_mode) {
 		snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
 			   "switching to polling mode: last cmd=0x%08x\n",
@@ -1878,6 +1893,9 @@
 
 	if (!bdl_pos_adj[chip->dev_index])
 		return 1; /* no delayed ack */
+	if (WARN_ONCE(!azx_dev->period_bytes,
+		      "hda-intel: zero azx_dev->period_bytes"))
+		return 0; /* this shouldn't happen! */
 	if (pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
 		return 0; /* NG - it's below the period boundary */
 	return 1; /* OK, it's fine */
@@ -2043,7 +2061,7 @@
 {
 	if (request_irq(chip->pci->irq, azx_interrupt,
 			chip->msi ? 0 : IRQF_SHARED,
-			"HDA Intel", chip)) {
+			"hda_intel", chip)) {
 		printk(KERN_ERR "hda-intel: unable to grab IRQ %d, "
 		       "disabling device\n", chip->pci->irq);
 		if (do_disconnect)
@@ -2332,6 +2350,7 @@
  */
 static struct snd_pci_quirk msi_black_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
+	SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
 	{}
 };
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e3caa78..da34095 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1093,6 +1093,16 @@
 	snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_PROC_COEF, tmp|0x2010);
 }
 
+/* turn on/off EAPD control (only if available) */
+static void set_eapd(struct hda_codec *codec, hda_nid_t nid, int on)
+{
+	if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
+		return;
+	if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
+		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
+				    on ? 2 : 0);
+}
+
 static void alc_auto_init_amp(struct hda_codec *codec, int type)
 {
 	unsigned int tmp;
@@ -1110,25 +1120,22 @@
 	case ALC_INIT_DEFAULT:
 		switch (codec->vendor_id) {
 		case 0x10ec0260:
-			snd_hda_codec_write(codec, 0x0f, 0,
-					    AC_VERB_SET_EAPD_BTLENABLE, 2);
-			snd_hda_codec_write(codec, 0x10, 0,
-					    AC_VERB_SET_EAPD_BTLENABLE, 2);
+			set_eapd(codec, 0x0f, 1);
+			set_eapd(codec, 0x10, 1);
 			break;
 		case 0x10ec0262:
 		case 0x10ec0267:
 		case 0x10ec0268:
 		case 0x10ec0269:
+		case 0x10ec0270:
 		case 0x10ec0272:
 		case 0x10ec0660:
 		case 0x10ec0662:
 		case 0x10ec0663:
 		case 0x10ec0862:
 		case 0x10ec0889:
-			snd_hda_codec_write(codec, 0x14, 0,
-					    AC_VERB_SET_EAPD_BTLENABLE, 2);
-			snd_hda_codec_write(codec, 0x15, 0,
-					    AC_VERB_SET_EAPD_BTLENABLE, 2);
+			set_eapd(codec, 0x14, 1);
+			set_eapd(codec, 0x15, 1);
 			break;
 		}
 		switch (codec->vendor_id) {
@@ -1230,6 +1237,8 @@
 			return; /* invalid entry */
 		}
 	}
+	if (!ext || !fixed)
+		return;
 	if (!(get_wcaps(codec, ext) & AC_WCAP_UNSOL_CAP))
 		return; /* no unsol support */
 	snd_printdd("realtek: Enable auto-mic switch on NID 0x%x/0x%x\n",
@@ -1834,10 +1843,8 @@
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 static void alc889_power_eapd(struct hda_codec *codec, int power)
 {
-	snd_hda_codec_write(codec, 0x14, 0,
-			    AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
-	snd_hda_codec_write(codec, 0x15, 0,
-			    AC_VERB_SET_EAPD_BTLENABLE, power ? 2 : 0);
+	set_eapd(codec, 0x14, power);
+	set_eapd(codec, 0x15, power);
 }
 #endif
 
@@ -4812,6 +4819,49 @@
 	spec->auto_mic = 0; /* disable auto-mic to be sure */
 }
 
+/* choose the ADC/MUX containing the input pin and initialize the setup */
+static void fixup_single_adc(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t pin;
+	int i;
+
+	/* search for the input pin; there must be only one */
+	for (i = 0; i < AUTO_PIN_LAST; i++) {
+		if (spec->autocfg.input_pins[i]) {
+			pin = spec->autocfg.input_pins[i];
+			break;
+		}
+	}
+	if (!pin)
+		return;
+
+	/* set the default connection to that pin */
+	for (i = 0; i < spec->num_adc_nids; i++) {
+		hda_nid_t cap = spec->capsrc_nids ?
+			spec->capsrc_nids[i] : spec->adc_nids[i];
+		int idx;
+
+		idx = get_connection_index(codec, cap, pin);
+		if (idx < 0)
+			continue;
+		/* use only this ADC */
+		if (spec->capsrc_nids)
+			spec->capsrc_nids += i;
+		spec->adc_nids += i;
+		spec->num_adc_nids = 1;
+		/* select or unmute this route */
+		if (get_wcaps_type(get_wcaps(codec, cap)) == AC_WID_AUD_MIX) {
+			snd_hda_codec_amp_stereo(codec, cap, HDA_INPUT, idx,
+						 HDA_AMP_MUTE, 0);
+		} else {
+			snd_hda_codec_write_cache(codec, cap, 0,
+					  AC_VERB_SET_CONNECT_SEL, idx);
+		}
+		return;
+	}
+}
+
 static void set_capture_mixer(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -4824,14 +4874,15 @@
 		  alc_capture_mixer3 },
 	};
 	if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) {
-		int mux;
-		if (spec->auto_mic) {
-			mux = 0;
+		int mux = 0;
+		if (spec->auto_mic)
 			fixup_automic_adc(codec);
-		} else if (spec->input_mux && spec->input_mux->num_items > 1)
-			mux = 1;
-		else
-			mux = 0;
+		else if (spec->input_mux) {
+			if (spec->input_mux->num_items > 1)
+				mux = 1;
+			else if (spec->input_mux->num_items == 1)
+				fixup_single_adc(codec);
+		}
 		spec->cap_mixer = caps[mux][spec->num_adc_nids - 1];
 	}
 }
@@ -7094,8 +7145,8 @@
 	HDA_BIND_MUTE   ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
 	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("HP Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("HP Playback Switch", 0x0f, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
+	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
@@ -7496,6 +7547,7 @@
 	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
 	{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
+	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
 	/* Front Mic pin: input vref at 80% */
 	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
 	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
@@ -7680,6 +7732,27 @@
 	spec->autocfg.speaker_pins[0] = 0x14;
 }
 
+static void alc885_mb5_automute(struct hda_codec *codec)
+{
+	unsigned int present;
+
+	present = snd_hda_codec_read(codec, 0x14, 0,
+				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	snd_hda_codec_amp_stereo(codec, 0x18, HDA_OUTPUT, 0,
+				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+	snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
+				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+
+}
+
+static void alc885_mb5_unsol_event(struct hda_codec *codec,
+				    unsigned int res)
+{
+	/* Headphone insertion or removal. */
+	if ((res >> 26) == ALC880_HP_EVENT)
+		alc885_mb5_automute(codec);
+}
+
 static void alc885_imac91_automute(struct hda_codec *codec)
 {
  	unsigned int present;
@@ -9126,6 +9199,8 @@
 		.input_mux = &mb5_capture_source,
 		.dig_out_nid = ALC882_DIGOUT_NID,
 		.dig_in_nid = ALC882_DIGIN_NID,
+		.unsol_event = alc885_mb5_unsol_event,
+		.init_hook = alc885_mb5_automute,
 	},
 	[ALC885_MACPRO] = {
 		.mixers = { alc882_macpro_mixer },
@@ -9403,6 +9478,7 @@
 		.num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
 		.channel_mode = alc883_3ST_6ch_modes,
 		.need_dac_fix = 1,
+		.const_channel_count = 6,
 		.num_mux_defs =
 			ARRAY_SIZE(alc888_2_capture_sources),
 		.input_mux = alc888_2_capture_sources,
@@ -10307,7 +10383,7 @@
 	struct alc_spec *spec = codec->spec;
 
 	spec->autocfg.hp_pins[0] = 0x15;
-	spec->autocfg.speaker_pins[0] = 0x0c; /* HACK: not actually a pin */
+	spec->autocfg.speaker_pins[0] = 0x14;
 }
 
 static struct snd_kcontrol_new alc262_hp_t5735_mixer[] = {
@@ -11179,7 +11255,7 @@
 }
 
 #define alc262_auto_create_input_ctls \
-	alc880_auto_create_input_ctls
+	alc882_auto_create_input_ctls
 
 /*
  * generic initialization of ADC, input mixers and output mixers
@@ -11718,9 +11794,9 @@
 		.num_channel_mode = ARRAY_SIZE(alc262_modes),
 		.channel_mode = alc262_modes,
 		.input_mux = &alc262_capture_source,
-		.unsol_event = alc_automute_amp_unsol_event,
+		.unsol_event = alc_sku_unsol_event,
 		.setup = alc262_hp_t5735_setup,
-		.init_hook = alc_automute_amp,
+		.init_hook = alc_inithook,
 	},
 	[ALC262_HP_RP5700] = {
 		.mixers = { alc262_hp_rp5700_mixer },
@@ -12471,6 +12547,7 @@
 		dac = 0x02;
 		break;
 	case 0x15:
+	case 0x21:
 		dac = 0x03;
 		break;
 	default:
@@ -14855,6 +14932,8 @@
 	spec->stream_digital_playback = &alc861_pcm_digital_playback;
 	spec->stream_digital_capture = &alc861_pcm_digital_capture;
 
+	if (!spec->cap_mixer)
+		set_capture_mixer(codec);
 	set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
 
 	spec->vmaster_nid = 0x03;
@@ -17251,7 +17330,7 @@
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
 		      ALC662_3ST_6ch_DIG),
-	SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
+	SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO),
 	SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 2291a83..799ba25 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4730,6 +4730,26 @@
 	}
 }
 
+static int hp_blike_system(u32 subsystem_id);
+
+static void set_hp_led_gpio(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	switch (codec->vendor_id) {
+	case 0x111d7608:
+		/* GPIO 0 */
+		spec->gpio_led = 0x01;
+		break;
+	case 0x111d7600:
+	case 0x111d7601:
+	case 0x111d7602:
+	case 0x111d7603:
+		/* GPIO 3 */
+		spec->gpio_led = 0x08;
+		break;
+	}
+}
+
 /*
  * This method searches for the mute LED GPIO configuration
  * provided as OEM string in SMBIOS. The format of that string
@@ -4741,6 +4761,14 @@
  *
  * So, HP B-series like systems may have HP_Mute_LED_0 (current models)
  * or  HP_Mute_LED_0_3 (future models) OEM SMBIOS strings
+ *
+ *
+ * The dv-series laptops don't seem to have the HP_Mute_LED* strings in
+ * SMBIOS - at least the ones I have seen do not have them - which include
+ * my own system (HP Pavilion dv6-1110ax) and my cousin's
+ * HP Pavilion dv9500t CTO.
+ * Need more information on whether it is true across the entire series.
+ * -- kunal
  */
 static int find_mute_led_gpio(struct hda_codec *codec)
 {
@@ -4751,28 +4779,27 @@
 		while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
 								NULL, dev))) {
 			if (sscanf(dev->name, "HP_Mute_LED_%d_%d",
-			      &spec->gpio_led_polarity,
-			      &spec->gpio_led) == 2) {
+				  &spec->gpio_led_polarity,
+				  &spec->gpio_led) == 2) {
 				spec->gpio_led = 1 << spec->gpio_led;
 				return 1;
 			}
 			if (sscanf(dev->name, "HP_Mute_LED_%d",
-			      &spec->gpio_led_polarity) == 1) {
-				switch (codec->vendor_id) {
-				case 0x111d7608:
-					/* GPIO 0 */
-					spec->gpio_led = 0x01;
-					return 1;
-				case 0x111d7600:
-				case 0x111d7601:
-				case 0x111d7602:
-				case 0x111d7603:
-					/* GPIO 3 */
-					spec->gpio_led = 0x08;
-					return 1;
-				}
+				  &spec->gpio_led_polarity) == 1) {
+				set_hp_led_gpio(codec);
+				return 1;
 			}
 		}
+
+		/*
+		 * Fallback case - if we don't find the DMI strings,
+		 * we statically set the GPIO - if not a B-series system.
+		 */
+		if (!hp_blike_system(codec->subsystem_id)) {
+			set_hp_led_gpio(codec);
+			spec->gpio_led_polarity = 1;
+			return 1;
+		}
 	}
 	return 0;
 }
@@ -5548,6 +5575,8 @@
 	spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
 	spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
 
+	snd_printdd("Found board config: %d\n", spec->board_config);
+
 	switch (spec->board_config) {
 	case STAC_HP_M4:
 		/* enable internal microphone */
diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c
index 765d7bd..9e66f6d 100644
--- a/sound/pci/ice1712/aureon.c
+++ b/sound/pci/ice1712/aureon.c
@@ -703,11 +703,13 @@
 {
 	unsigned char nvol;
 
-	if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE))
+	if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE)) {
 		nvol = 0;
-	else
+	} else {
 		nvol = ((vol % WM_VOL_CNT) * (master % WM_VOL_CNT)) /
 								WM_VOL_MAX;
+		nvol += 0x1b;
+	}
 
 	wm_put(ice, index, nvol);
 	wm_put_nocache(ice, index, 0x180 | nvol);
@@ -778,7 +780,7 @@
 	for (ch = 0; ch < 2; ch++) {
 		unsigned int vol = ucontrol->value.integer.value[ch];
 		if (vol > WM_VOL_MAX)
-			continue;
+			vol = WM_VOL_MAX;
 		vol |= spec->master[ch] & WM_VOL_MUTE;
 		if (vol != spec->master[ch]) {
 			int dac;
@@ -834,8 +836,8 @@
 	for (i = 0; i < voices; i++) {
 		unsigned int vol = ucontrol->value.integer.value[i];
 		if (vol > WM_VOL_MAX)
-			continue;
-		vol |= spec->vol[ofs+i];
+			vol = WM_VOL_MAX;
+		vol |= spec->vol[ofs+i] & WM_VOL_MUTE;
 		if (vol != spec->vol[ofs+i]) {
 			spec->vol[ofs+i] = vol;
 			idx  = WM_DAC_ATTEN + ofs + i;
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index a9dc5fb..da589d8 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -627,7 +627,7 @@
 	u16 reg;
 
 	/* Sync reg_cache with the hardware */
-	for (reg = 0; reg < TLV320AIC23_RESET; reg++) {
+	for (reg = 0; reg <= TLV320AIC23_ACTIVE; reg++) {
 		u16 val = tlv320aic23_read_reg_cache(codec, reg);
 		tlv320aic23_write(codec, reg, val);
 	}
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index ce5515e..3595bd5 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -1504,7 +1504,7 @@
 	struct i2c_client *i2c = codec->control_data;
 	int i;
 	u16 *reg_cache = codec->reg_cache;
-	u16 *tmp_cache = kmemdup(codec->reg_cache, sizeof(wm8903_reg_defaults),
+	u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults),
 				 GFP_KERNEL);
 
 	/* Bring the codec back up to standby first to minimise pop/clicks */
@@ -1516,6 +1516,7 @@
 		for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
 			if (tmp_cache[i] != reg_cache[i])
 				snd_soc_write(codec, i, tmp_cache[i]);
+		kfree(tmp_cache);
 	} else {
 		dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
 	}
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 3db8a6c..19283e5 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -25,7 +25,7 @@
 obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP2EVM) += snd-soc-omap2evm.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o
-obj-$(CONFIG_SND_OMAP_SOC_OMAP3517EVM) += snd-soc-am3517evm.o
+obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o
 obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index 71b2c16..68980c1 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -145,6 +145,7 @@
 };
 
 static const struct snd_soc_dapm_route omap3pandora_out_map[] = {
+	{"PCM DAC", NULL, "APLL Enable"},
 	{"Headphone Amplifier", NULL, "PCM DAC"},
 	{"Line Out", NULL, "PCM DAC"},
 	{"Headphone Jack", NULL, "Headphone Amplifier"},
diff --git a/sound/sound_core.c b/sound/sound_core.c
index dbca7c9..7c2d677 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -61,7 +61,7 @@
 	class_destroy(sound_class);
 }
 
-module_init(init_soundcore);
+subsys_initcall(init_soundcore);
 module_exit(cleanup_soundcore);
 
 
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index fe08660..124760b 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -13,6 +13,7 @@
 perf*.html
 common-cmds.h
 perf.data
+perf.data.old
 tags
 TAGS
 cscope*
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 652a470..2e7fa3a 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -250,7 +250,19 @@
 # explicitly what architecture to check for. Fix this up for yours..
 SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 
-ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(V), 2)
+	QUIET_STDERR = ">/dev/null"
+else
+	QUIET_STDERR = ">/dev/null 2>&1"
+endif
+
+BITBUCKET = "/dev/null"
+
+ifneq ($(shell sh -c "(echo '\#include <stdio.h>'; echo 'int main(void) { return puts(\"hi\"); }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
+	BITBUCKET = .perf.dev.null
+endif
+
+ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
   CFLAGS := $(CFLAGS) -fstack-protector-all
 endif
 
@@ -451,11 +463,6 @@
 
 PERFLIBS = $(LIB_FILE)
 
-ifeq ($(V), 2)
-	QUIET_STDERR = ">/dev/null"
-else
-	QUIET_STDERR = ">/dev/null 2>&1"
-endif
 #
 # Platform specific tweaks
 #
@@ -483,19 +490,19 @@
 	PTHREAD_LIBS =
 endif
 
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
 	msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
 endif
 
-	ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+	ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
 		BASIC_CFLAGS += -DLIBELF_NO_MMAP
 	endif
 else
 	msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
 endif
 
-ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#ifndef _MIPS_SZLONG'; echo '\#define _MIPS_SZLONG 0'; echo '\#endif'; echo '\#include <dwarf.h>'; echo '\#include <libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/libdwarf -ldwarf -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
 	msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231);
 	BASIC_CFLAGS += -DNO_LIBDWARF
 else
@@ -509,7 +516,7 @@
 PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
 endif
 
-ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o /dev/null $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o $(BITBUCKET) $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
 	BASIC_CFLAGS += -DNO_LIBPERL
 else
 	ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
@@ -519,20 +526,20 @@
 ifdef NO_DEMANGLE
 	BASIC_CFLAGS += -DNO_DEMANGLE
 else
-	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
+	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
 
 	ifeq ($(has_bfd),y)
 		EXTLIBS += -lbfd
 	else
-		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
 		ifeq ($(has_bfd_iberty),y)
 			EXTLIBS += -lbfd -liberty
 		else
-			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
 			ifeq ($(has_bfd_iberty_z),y)
 				EXTLIBS += -lbfd -liberty -lz
 			else
-				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
 				ifeq ($(has_cplus_demangle),y)
 					EXTLIBS += -liberty
 					BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
@@ -780,7 +787,7 @@
 
 SHELL = $(SHELL_PATH)
 
-all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
+all:: .perf.dev.null shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) PERF-BUILD-OPTIONS
 ifneq (,$X)
 	$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
 endif
@@ -1107,6 +1114,11 @@
 .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
 .PHONY: .FORCE-PERF-BUILD-OPTIONS
 
+.perf.dev.null:
+		touch .perf.dev.null
+
+.INTERMEDIATE:	.perf.dev.null
+
 ### Make sure built-ins do not have dups and listed in perf.c
 #
 check-builtins::
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 7ceb741..93c67bf 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -375,7 +375,7 @@
 
 	printf("%.102s\n", graph_dotted_line);
 	printf(" %-34s |",  is_caller ? "Callsite": "Alloc Ptr");
-	printf(" Total_alloc/Per | Total_req/Per   | Hit   | Ping-pong | Frag\n");
+	printf(" Total_alloc/Per | Total_req/Per   | Hit      | Ping-pong | Frag\n");
 	printf("%.102s\n", graph_dotted_line);
 
 	next = rb_first(root);
@@ -401,7 +401,7 @@
 			snprintf(buf, sizeof(buf), "%#Lx", addr);
 		printf(" %-34s |", buf);
 
-		printf(" %9llu/%-5lu | %9llu/%-5lu | %6lu | %8lu | %6.3f%%\n",
+		printf(" %9llu/%-5lu | %9llu/%-5lu | %8lu | %8lu | %6.3f%%\n",
 		       (unsigned long long)data->bytes_alloc,
 		       (unsigned long)data->bytes_alloc / data->hit,
 		       (unsigned long long)data->bytes_req,
@@ -784,7 +784,8 @@
 			setup_sorting(&alloc_sort, default_sort_order);
 
 		return __cmd_kmem();
-	}
+	} else
+		usage_with_options(kmem_usage, kmem_options);
 
 	return 0;
 }
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index db10c0e..860f1ee 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -269,7 +269,7 @@
 
 	else if (!strncmp(tok, "none", strlen(arg))) {
 		callchain_param.mode = CHAIN_NONE;
-		symbol_conf.use_callchain = true;
+		symbol_conf.use_callchain = false;
 
 		return 0;
 	}
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index a589a43..3f8bbcf 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -280,7 +280,7 @@
 
 static int process_comm_event(event_t *event, struct perf_session *session __used)
 {
-	pid_set_comm(event->comm.pid, event->comm.comm);
+	pid_set_comm(event->comm.tid, event->comm.comm);
 	return 0;
 }
 
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index ddc584b..4b91d8c 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -705,7 +705,7 @@
 		fprintf(stdout, "\t[w]     toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
 
 	fprintf(stdout,
-		"\t[K]     hide kernel_symbols symbols.             \t(%s)\n",
+		"\t[K]     hide kernel_symbols symbols.     \t(%s)\n",
 		hide_kernel_symbols ? "yes" : "no");
 	fprintf(stdout,
 		"\t[U]     hide user symbols.               \t(%s)\n",
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index bb0fd6d..8a9e6ba 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -295,10 +295,10 @@
 	al->thread = self;
 	al->addr = addr;
 
-	if (cpumode & PERF_RECORD_MISC_KERNEL) {
+	if (cpumode == PERF_RECORD_MISC_KERNEL) {
 		al->level = 'k';
 		mg = &session->kmaps;
-	} else if (cpumode & PERF_RECORD_MISC_USER)
+	} else if (cpumode == PERF_RECORD_MISC_USER)
 		al->level = '.';
 	else {
 		al->level = 'H';
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 29465d4..fde17b0 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -272,6 +272,7 @@
 	int ret;
 
 	pp->probes[0] = buf = zalloc(MAX_CMDLEN);
+	pp->found = 1;
 	if (!buf)
 		die("Failed to allocate memory by zalloc.");
 	if (pp->offset) {
@@ -294,6 +295,7 @@
 error:
 		free(pp->probes[0]);
 		pp->probes[0] = NULL;
+		pp->found = 0;
 	}
 	return ret;
 }
@@ -455,6 +457,7 @@
 	struct strlist *rawlist;
 	struct str_node *ent;
 
+	memset(&pp, 0, sizeof(pp));
 	fd = open_kprobe_events(O_RDONLY, 0);
 	rawlist = get_trace_kprobe_event_rawlist(fd);
 	close(fd);
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index 30f70fd..a9d3fc6 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -72,12 +72,13 @@
 irqfd_shutdown(struct work_struct *work)
 {
 	struct _irqfd *irqfd = container_of(work, struct _irqfd, shutdown);
+	u64 cnt;
 
 	/*
 	 * Synchronize with the wait-queue and unhook ourselves to prevent
 	 * further events.
 	 */
-	remove_wait_queue(irqfd->wqh, &irqfd->wait);
+	eventfd_ctx_remove_wait_queue(irqfd->eventfd, &irqfd->wait, &cnt);
 
 	/*
 	 * We know no new events will be scheduled at this point, so block
@@ -166,7 +167,7 @@
 static int
 kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
 {
-	struct _irqfd *irqfd;
+	struct _irqfd *irqfd, *tmp;
 	struct file *file = NULL;
 	struct eventfd_ctx *eventfd = NULL;
 	int ret;
@@ -203,9 +204,20 @@
 	init_waitqueue_func_entry(&irqfd->wait, irqfd_wakeup);
 	init_poll_funcptr(&irqfd->pt, irqfd_ptable_queue_proc);
 
+	spin_lock_irq(&kvm->irqfds.lock);
+
+	ret = 0;
+	list_for_each_entry(tmp, &kvm->irqfds.items, list) {
+		if (irqfd->eventfd != tmp->eventfd)
+			continue;
+		/* This fd is used for another irq already. */
+		ret = -EBUSY;
+		spin_unlock_irq(&kvm->irqfds.lock);
+		goto fail;
+	}
+
 	events = file->f_op->poll(file, &irqfd->pt);
 
-	spin_lock_irq(&kvm->irqfds.lock);
 	list_add_tail(&irqfd->list, &kvm->irqfds.items);
 	spin_unlock_irq(&kvm->irqfds.lock);
 
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index 9b07734..9fd5b3e 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -302,6 +302,7 @@
 {
 	int r = -EINVAL;
 	int delta;
+	unsigned max_pin;
 	struct kvm_kernel_irq_routing_entry *ei;
 	struct hlist_node *n;
 
@@ -322,12 +323,15 @@
 		switch (ue->u.irqchip.irqchip) {
 		case KVM_IRQCHIP_PIC_MASTER:
 			e->set = kvm_set_pic_irq;
+			max_pin = 16;
 			break;
 		case KVM_IRQCHIP_PIC_SLAVE:
 			e->set = kvm_set_pic_irq;
+			max_pin = 16;
 			delta = 8;
 			break;
 		case KVM_IRQCHIP_IOAPIC:
+			max_pin = KVM_IOAPIC_NUM_PINS;
 			e->set = kvm_set_ioapic_irq;
 			break;
 		default:
@@ -335,7 +339,7 @@
 		}
 		e->irqchip.irqchip = ue->u.irqchip.irqchip;
 		e->irqchip.pin = ue->u.irqchip.pin + delta;
-		if (e->irqchip.pin >= KVM_IOAPIC_NUM_PINS)
+		if (e->irqchip.pin >= max_pin)
 			goto out;
 		rt->chip[ue->u.irqchip.irqchip][e->irqchip.pin] = ue->gsi;
 		break;