| /* |
| * Dynamic DMA mapping support. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/string.h> |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/dmar.h> |
| #include <asm/io.h> |
| #include <asm/gart.h> |
| #include <asm/calgary.h> |
| |
| int iommu_merge __read_mostly = 1; |
| EXPORT_SYMBOL(iommu_merge); |
| |
| dma_addr_t bad_dma_address __read_mostly; |
| EXPORT_SYMBOL(bad_dma_address); |
| |
| /* This tells the BIO block layer to assume merging. Default to off |
| because we cannot guarantee merging later. */ |
| int iommu_bio_merge __read_mostly = 0; |
| EXPORT_SYMBOL(iommu_bio_merge); |
| |
| static int iommu_sac_force __read_mostly = 0; |
| |
| int no_iommu __read_mostly; |
| #ifdef CONFIG_IOMMU_DEBUG |
| int panic_on_overflow __read_mostly = 1; |
| int force_iommu __read_mostly = 1; |
| #else |
| int panic_on_overflow __read_mostly = 0; |
| int force_iommu __read_mostly= 0; |
| #endif |
| |
| /* Set this to 1 if there is a HW IOMMU in the system */ |
| int iommu_detected __read_mostly = 0; |
| |
| /* Dummy device used for NULL arguments (normally ISA). Better would |
| be probably a smaller DMA mask, but this is bug-to-bug compatible |
| to i386. */ |
| struct device fallback_dev = { |
| .bus_id = "fallback device", |
| .coherent_dma_mask = DMA_32BIT_MASK, |
| .dma_mask = &fallback_dev.coherent_dma_mask, |
| }; |
| |
| /* Allocate DMA memory on node near device */ |
| noinline static void * |
| dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) |
| { |
| struct page *page; |
| int node; |
| |
| node = dev_to_node(dev); |
| if (node == -1) |
| node = numa_node_id(); |
| |
| if (node < first_node(node_online_map)) |
| node = first_node(node_online_map); |
| |
| page = alloc_pages_node(node, gfp, order); |
| return page ? page_address(page) : NULL; |
| } |
| |
| /* |
| * Allocate memory for a coherent mapping. |
| */ |
| void * |
| dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, |
| gfp_t gfp) |
| { |
| void *memory; |
| unsigned long dma_mask = 0; |
| u64 bus; |
| |
| if (!dev) |
| dev = &fallback_dev; |
| dma_mask = dev->coherent_dma_mask; |
| if (dma_mask == 0) |
| dma_mask = DMA_32BIT_MASK; |
| |
| /* Device not DMA able */ |
| if (dev->dma_mask == NULL) |
| return NULL; |
| |
| /* Don't invoke OOM killer */ |
| gfp |= __GFP_NORETRY; |
| |
| /* Kludge to make it bug-to-bug compatible with i386. i386 |
| uses the normal dma_mask for alloc_coherent. */ |
| dma_mask &= *dev->dma_mask; |
| |
| /* Why <=? Even when the mask is smaller than 4GB it is often |
| larger than 16MB and in this case we have a chance of |
| finding fitting memory in the next higher zone first. If |
| not retry with true GFP_DMA. -AK */ |
| if (dma_mask <= DMA_32BIT_MASK) |
| gfp |= GFP_DMA32; |
| |
| again: |
| memory = dma_alloc_pages(dev, gfp, get_order(size)); |
| if (memory == NULL) |
| return NULL; |
| |
| { |
| int high, mmu; |
| bus = virt_to_bus(memory); |
| high = (bus + size) >= dma_mask; |
| mmu = high; |
| if (force_iommu && !(gfp & GFP_DMA)) |
| mmu = 1; |
| else if (high) { |
| free_pages((unsigned long)memory, |
| get_order(size)); |
| |
| /* Don't use the 16MB ZONE_DMA unless absolutely |
| needed. It's better to use remapping first. */ |
| if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) { |
| gfp = (gfp & ~GFP_DMA32) | GFP_DMA; |
| goto again; |
| } |
| |
| /* Let low level make its own zone decisions */ |
| gfp &= ~(GFP_DMA32|GFP_DMA); |
| |
| if (dma_ops->alloc_coherent) |
| return dma_ops->alloc_coherent(dev, size, |
| dma_handle, gfp); |
| return NULL; |
| } |
| |
| memset(memory, 0, size); |
| if (!mmu) { |
| *dma_handle = virt_to_bus(memory); |
| return memory; |
| } |
| } |
| |
| if (dma_ops->alloc_coherent) { |
| free_pages((unsigned long)memory, get_order(size)); |
| gfp &= ~(GFP_DMA|GFP_DMA32); |
| return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); |
| } |
| |
| if (dma_ops->map_simple) { |
| *dma_handle = dma_ops->map_simple(dev, memory, |
| size, |
| PCI_DMA_BIDIRECTIONAL); |
| if (*dma_handle != bad_dma_address) |
| return memory; |
| } |
| |
| if (panic_on_overflow) |
| panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",size); |
| free_pages((unsigned long)memory, get_order(size)); |
| return NULL; |
| } |
| EXPORT_SYMBOL(dma_alloc_coherent); |
| |
| /* |
| * Unmap coherent memory. |
| * The caller must ensure that the device has finished accessing the mapping. |
| */ |
| void dma_free_coherent(struct device *dev, size_t size, |
| void *vaddr, dma_addr_t bus) |
| { |
| WARN_ON(irqs_disabled()); /* for portability */ |
| if (dma_ops->unmap_single) |
| dma_ops->unmap_single(dev, bus, size, 0); |
| free_pages((unsigned long)vaddr, get_order(size)); |
| } |
| EXPORT_SYMBOL(dma_free_coherent); |
| |
| static int forbid_dac __read_mostly; |
| |
| int dma_supported(struct device *dev, u64 mask) |
| { |
| #ifdef CONFIG_PCI |
| if (mask > 0xffffffff && forbid_dac > 0) { |
| |
| |
| |
| printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", dev->bus_id); |
| return 0; |
| } |
| #endif |
| |
| if (dma_ops->dma_supported) |
| return dma_ops->dma_supported(dev, mask); |
| |
| /* Copied from i386. Doesn't make much sense, because it will |
| only work for pci_alloc_coherent. |
| The caller just has to use GFP_DMA in this case. */ |
| if (mask < DMA_24BIT_MASK) |
| return 0; |
| |
| /* Tell the device to use SAC when IOMMU force is on. This |
| allows the driver to use cheaper accesses in some cases. |
| |
| Problem with this is that if we overflow the IOMMU area and |
| return DAC as fallback address the device may not handle it |
| correctly. |
| |
| As a special case some controllers have a 39bit address |
| mode that is as efficient as 32bit (aic79xx). Don't force |
| SAC for these. Assume all masks <= 40 bits are of this |
| type. Normally this doesn't make any difference, but gives |
| more gentle handling of IOMMU overflow. */ |
| if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { |
| printk(KERN_INFO "%s: Force SAC with mask %Lx\n", dev->bus_id,mask); |
| return 0; |
| } |
| |
| return 1; |
| } |
| EXPORT_SYMBOL(dma_supported); |
| |
| int dma_set_mask(struct device *dev, u64 mask) |
| { |
| if (!dev->dma_mask || !dma_supported(dev, mask)) |
| return -EIO; |
| *dev->dma_mask = mask; |
| return 0; |
| } |
| EXPORT_SYMBOL(dma_set_mask); |
| |
| /* |
| * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter |
| * documentation. |
| */ |
| __init int iommu_setup(char *p) |
| { |
| iommu_merge = 1; |
| |
| if (!p) |
| return -EINVAL; |
| |
| while (*p) { |
| if (!strncmp(p,"off",3)) |
| no_iommu = 1; |
| /* gart_parse_options has more force support */ |
| if (!strncmp(p,"force",5)) |
| force_iommu = 1; |
| if (!strncmp(p,"noforce",7)) { |
| iommu_merge = 0; |
| force_iommu = 0; |
| } |
| |
| if (!strncmp(p, "biomerge",8)) { |
| iommu_bio_merge = 4096; |
| iommu_merge = 1; |
| force_iommu = 1; |
| } |
| if (!strncmp(p, "panic",5)) |
| panic_on_overflow = 1; |
| if (!strncmp(p, "nopanic",7)) |
| panic_on_overflow = 0; |
| if (!strncmp(p, "merge",5)) { |
| iommu_merge = 1; |
| force_iommu = 1; |
| } |
| if (!strncmp(p, "nomerge",7)) |
| iommu_merge = 0; |
| if (!strncmp(p, "forcesac",8)) |
| iommu_sac_force = 1; |
| if (!strncmp(p, "allowdac", 8)) |
| forbid_dac = 0; |
| if (!strncmp(p, "nodac", 5)) |
| forbid_dac = -1; |
| |
| #ifdef CONFIG_SWIOTLB |
| if (!strncmp(p, "soft",4)) |
| swiotlb = 1; |
| #endif |
| |
| #ifdef CONFIG_GART_IOMMU |
| gart_parse_options(p); |
| #endif |
| |
| #ifdef CONFIG_CALGARY_IOMMU |
| if (!strncmp(p, "calgary", 7)) |
| use_calgary = 1; |
| #endif /* CONFIG_CALGARY_IOMMU */ |
| |
| p += strcspn(p, ","); |
| if (*p == ',') |
| ++p; |
| } |
| return 0; |
| } |
| early_param("iommu", iommu_setup); |
| |
| void __init pci_iommu_alloc(void) |
| { |
| /* |
| * The order of these functions is important for |
| * fall-back/fail-over reasons |
| */ |
| #ifdef CONFIG_GART_IOMMU |
| iommu_hole_init(); |
| #endif |
| |
| #ifdef CONFIG_CALGARY_IOMMU |
| detect_calgary(); |
| #endif |
| |
| detect_intel_iommu(); |
| |
| #ifdef CONFIG_SWIOTLB |
| pci_swiotlb_init(); |
| #endif |
| } |
| |
| static int __init pci_iommu_init(void) |
| { |
| #ifdef CONFIG_CALGARY_IOMMU |
| calgary_iommu_init(); |
| #endif |
| |
| intel_iommu_init(); |
| |
| #ifdef CONFIG_GART_IOMMU |
| gart_iommu_init(); |
| #endif |
| |
| no_iommu_init(); |
| return 0; |
| } |
| |
| void pci_iommu_shutdown(void) |
| { |
| gart_iommu_shutdown(); |
| } |
| |
| #ifdef CONFIG_PCI |
| /* Many VIA bridges seem to corrupt data for DAC. Disable it here */ |
| |
| static __devinit void via_no_dac(struct pci_dev *dev) |
| { |
| if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { |
| printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n"); |
| forbid_dac = 1; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); |
| #endif |
| /* Must execute after PCI subsystem */ |
| fs_initcall(pci_iommu_init); |