clk: sunxi: Make divs clocks specify which output is the base factor clock
The current sunxi clock driver has the base factor clock of divs clocks
as the last clock output of the clock node. This makes it rather difficult
to add new outputs, such as fixed dividers, which were previously unknown.
This patch makes the divs clocks data structure specify which output is
the factor clock, and updates all current divs clocks accordingly.
We can then add new outputs after the factor clocks, at least not breaking
backward compatibility with regards to the devicetree bindings.
Also replace kzalloc with kcalloc in sunxi_divs_clk_setup().
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index d92e303..9f31314 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1046,13 +1046,20 @@
* sunxi_divs_clk_setup() helper data
*/
-#define SUNXI_DIVS_MAX_QTY 2
+#define SUNXI_DIVS_MAX_QTY 4
#define SUNXI_DIVISOR_WIDTH 2
struct divs_data {
const struct factors_data *factors; /* data for the factor clock */
- int ndivs; /* number of children */
+ int ndivs; /* number of outputs */
+ /*
+ * List of outputs. Refer to the diagram for sunxi_divs_clk_setup():
+ * self or base factor clock refers to the output from the pll
+ * itself. The remaining refer to fixed or configurable divider
+ * outputs.
+ */
struct {
+ u8 self; /* is it the base factor clock? (only one) */
u8 fixed; /* is it a fixed divisor? if not... */
struct clk_div_table *table; /* is it a table based divisor? */
u8 shift; /* otherwise it's a normal divisor with this shift */
@@ -1075,23 +1082,26 @@
.div = {
{ .shift = 0, .pow = 0, }, /* M, DDR */
{ .shift = 16, .pow = 1, }, /* P, other */
+ /* No output for the base factor clock */
}
};
static const struct divs_data pll6_divs_data __initconst = {
.factors = &sun4i_pll6_data,
- .ndivs = 2,
+ .ndivs = 3,
.div = {
{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
{ .fixed = 2 }, /* P, other */
+ { .self = 1 }, /* base factor clock, 2x */
}
};
static const struct divs_data sun6i_a31_pll6_divs_data __initconst = {
.factors = &sun6i_a31_pll6_data,
- .ndivs = 1,
+ .ndivs = 2,
.div = {
{ .fixed = 2 }, /* normal output */
+ { .self = 1 }, /* base factor clock, 2x */
}
};
@@ -1122,6 +1132,10 @@
int ndivs = SUNXI_DIVS_MAX_QTY, i = 0;
int flags, clkflags;
+ /* if number of children known, use it */
+ if (data->ndivs)
+ ndivs = data->ndivs;
+
/* Set up factor clock that we will be dividing */
pclk = sunxi_factors_clk_setup(node, data->factors);
parent = __clk_get_name(pclk);
@@ -1132,7 +1146,7 @@
if (!clk_data)
return;
- clks = kzalloc((SUNXI_DIVS_MAX_QTY+1) * sizeof(*clks), GFP_KERNEL);
+ clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL);
if (!clks)
goto free_clkdata;
@@ -1142,15 +1156,17 @@
* our RAM clock! */
clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
- /* if number of children known, use it */
- if (data->ndivs)
- ndivs = data->ndivs;
-
for (i = 0; i < ndivs; i++) {
if (of_property_read_string_index(node, "clock-output-names",
i, &clk_name) != 0)
break;
+ /* If this is the base factor clock, only update clks */
+ if (data->div[i].self) {
+ clk_data->clks[i] = pclk;
+ continue;
+ }
+
gate_hw = NULL;
rate_hw = NULL;
rate_ops = NULL;
@@ -1209,9 +1225,6 @@
clk_register_clkdev(clks[i], clk_name, NULL);
}
- /* The last clock available on the getter is the parent */
- clks[i++] = pclk;
-
/* Adjust to the real max */
clk_data->clk_num = i;