diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 217e517..3c62e66 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1436,9 +1436,9 @@
                interrupts = <1d 3>;
                interrupt-parent = <40000>;
                num-channels = <4>;
-               channel-fifo-len = <24>;
+               channel-fifo-len = <18>;
                exec-units-mask = <000000fe>;
-               descriptor-types-mask = <073f1127>;
+               descriptor-types-mask = <012b0ebf>;
        };
 
 
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
new file mode 100644
index 0000000..0fa010a
--- /dev/null
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -0,0 +1,1378 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Jul  3 12:08:41 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+CONFIG_PPC_CHRP=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_KEXEC is not set
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_SL82C105=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+# CONFIG_TULIP is not set
+CONFIG_DE4X5=y
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_MV643XX_ETH_0 is not set
+# CONFIG_MV643XX_ETH_1 is not set
+# CONFIG_MV643XX_ETH_2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_RTAS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HYDRA is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+# CONFIG_FB_MATROX_I2C is not set
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+# CONFIG_FB_ATY_GENERIC_LCD is not set
+CONFIG_FB_ATY_GX=y
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+CONFIG_FB_3DFX=y
+# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig
new file mode 100644
index 0000000..fc2d978
--- /dev/null
+++ b/arch/powerpc/configs/mpc834x_itx_defconfig
@@ -0,0 +1,1336 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Fri Jun 30 17:53:25 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC834x_SYS is not set
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC834x=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xfe000000
+CONFIG_MTD_PHYSMAP_LEN=0x1000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+# CONFIG_BLK_DEV_IDE is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+CONFIG_SCSI_SATA_SIL=y
+# CONFIG_SCSI_SATA_SIL24 is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=y
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+CONFIG_SERIAL_TEXT_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index a692091..f4e5e14e 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -111,7 +111,7 @@
 	logicalDisplayBase = (unsigned char *)address;
 	dispDeviceBase = (unsigned char *)address;
 	dispDeviceRowBytes = pitch;
-	dispDeviceDepth = depth;
+	dispDeviceDepth = depth == 15 ? 16 : depth;
 	dispDeviceRect[0] = dispDeviceRect[1] = 0;
 	dispDeviceRect[2] = width;
 	dispDeviceRect[3] = height;
@@ -160,20 +160,28 @@
 	unsigned long address = 0;
 	u32 *prop;
 
-	prop = (u32 *)get_property(np, "width", NULL);
+	prop = (u32 *)get_property(np, "linux,bootx-width", NULL);
+	if (prop == NULL)
+		prop = (u32 *)get_property(np, "width", NULL);
 	if (prop == NULL)
 		return -EINVAL;
 	width = *prop;
-	prop = (u32 *)get_property(np, "height", NULL);
+	prop = (u32 *)get_property(np, "linux,bootx-height", NULL);
+	if (prop == NULL)
+		prop = (u32 *)get_property(np, "height", NULL);
 	if (prop == NULL)
 		return -EINVAL;
 	height = *prop;
-	prop = (u32 *)get_property(np, "depth", NULL);
+	prop = (u32 *)get_property(np, "linux,bootx-depth", NULL);
+	if (prop == NULL)
+		prop = (u32 *)get_property(np, "depth", NULL);
 	if (prop == NULL)
 		return -EINVAL;
 	depth = *prop;
 	pitch = width * ((depth + 7) / 8);
-	prop = (u32 *)get_property(np, "linebytes", NULL);
+	prop = (u32 *)get_property(np, "linux,bootx-linebytes", NULL);
+	if (prop == NULL)
+		prop = (u32 *)get_property(np, "linebytes", NULL);
 	if (prop)
 		pitch = *prop;
 	if (pitch == 1)
@@ -194,7 +202,7 @@
 	g_max_loc_Y = height / 16;
 	dispDeviceBase = (unsigned char *)address;
 	dispDeviceRowBytes = pitch;
-	dispDeviceDepth = depth;
+	dispDeviceDepth = depth == 15 ? 16 : depth;
 	dispDeviceRect[0] = dispDeviceRect[1] = 0;
 	dispDeviceRect[2] = width;
 	dispDeviceRect[3] = height;
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index e47d40a..97ddc02 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -323,13 +323,11 @@
 			unsigned long irq_flags, const char * devname,
 			void *dev_id)
 {
-	unsigned int irq = virt_irq_create_mapping(ist);
+	unsigned int irq = irq_create_mapping(NULL, ist, 0);
 	
 	if (irq == NO_IRQ)
 		return -EINVAL;
 	
-	irq = irq_offset_up(irq);
-	
 	return request_irq(irq, handler,
 			   irq_flags, devname, dev_id);
 }
@@ -337,12 +335,9 @@
 
 void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id)
 {
-	unsigned int irq = virt_irq_create_mapping(ist);
+	unsigned int irq = irq_find_mapping(NULL, ist);
 	
-	irq = irq_offset_up(irq);
 	free_irq(irq, dev_id);
-	
-	return;
 }
 EXPORT_SYMBOL(ibmebus_free_irq);
 
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index e3774f6..8cf9878 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -29,6 +29,8 @@
  * to reduce code space and undefined function references.
  */
 
+#undef DEBUG
+
 #include <linux/module.h>
 #include <linux/threads.h>
 #include <linux/kernel_stat.h>
@@ -46,7 +48,10 @@
 #include <linux/cpumask.h>
 #include <linux/profile.h>
 #include <linux/bitops.h>
-#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/mutex.h>
+#include <linux/bootmem.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -57,39 +62,38 @@
 #include <asm/prom.h>
 #include <asm/ptrace.h>
 #include <asm/machdep.h>
+#include <asm/udbg.h>
 #ifdef CONFIG_PPC_ISERIES
 #include <asm/paca.h>
 #endif
 
 int __irq_offset_value;
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(__irq_offset_value);
-#endif
-
 static int ppc_spurious_interrupts;
 
 #ifdef CONFIG_PPC32
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+EXPORT_SYMBOL(__irq_offset_value);
 atomic_t ppc_n_lost_interrupts;
 
+#ifndef CONFIG_PPC_MERGE
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+#endif
+
 #ifdef CONFIG_TAU_INT
 extern int tau_initialized;
 extern int tau_interrupts(int);
 #endif
+#endif /* CONFIG_PPC32 */
 
 #if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
 extern atomic_t ipi_recv;
 extern atomic_t ipi_sent;
 #endif
-#endif /* CONFIG_PPC32 */
 
 #ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
 int distribute_irqs = 1;
-u64 ppc64_interrupt_controller;
 #endif /* CONFIG_PPC64 */
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -182,7 +186,7 @@
 
 void do_IRQ(struct pt_regs *regs)
 {
-	int irq;
+	unsigned int irq;
 #ifdef CONFIG_IRQSTACKS
 	struct thread_info *curtp, *irqtp;
 #endif
@@ -213,22 +217,26 @@
 	 */
 	irq = ppc_md.get_irq(regs);
 
-	if (irq >= 0) {
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
 #ifdef CONFIG_IRQSTACKS
 		/* Switch to the irq stack to handle this */
 		curtp = current_thread_info();
 		irqtp = hardirq_ctx[smp_processor_id()];
 		if (curtp != irqtp) {
+			struct irq_desc *desc = irq_desc + irq;
+			void *handler = desc->handle_irq;
+			if (handler == NULL)
+				handler = &__do_IRQ;
 			irqtp->task = curtp->task;
 			irqtp->flags = 0;
-			call___do_IRQ(irq, regs, irqtp);
+			call_handle_irq(irq, desc, regs, irqtp, handler);
 			irqtp->task = NULL;
 			if (irqtp->flags)
 				set_bits(irqtp->flags, &curtp->flags);
 		} else
 #endif
-			__do_IRQ(irq, regs);
-	} else if (irq != -2)
+			generic_handle_irq(irq, regs);
+	} else if (irq != NO_IRQ_IGNORE)
 		/* That's not SMP safe ... but who cares ? */
 		ppc_spurious_interrupts++;
 
@@ -245,138 +253,12 @@
 
 void __init init_IRQ(void)
 {
-#ifdef CONFIG_PPC64
-	static int once = 0;
-
-	if (once)
-		return;
-
-	once++;
-
-#endif
 	ppc_md.init_IRQ();
 #ifdef CONFIG_PPC64
 	irq_ctx_init();
 #endif
 }
 
-#ifdef CONFIG_PPC64
-/*
- * Virtual IRQ mapping code, used on systems with XICS interrupt controllers.
- */
-
-#define UNDEFINED_IRQ 0xffffffff
-unsigned int virt_irq_to_real_map[NR_IRQS];
-
-/*
- * Don't use virtual irqs 0, 1, 2 for devices.
- * The pcnet32 driver considers interrupt numbers < 2 to be invalid,
- * and 2 is the XICS IPI interrupt.
- * We limit virtual irqs to __irq_offet_value less than virt_irq_max so
- * that when we offset them we don't end up with an interrupt
- * number >= virt_irq_max.
- */
-#define MIN_VIRT_IRQ	3
-
-unsigned int virt_irq_max;
-static unsigned int max_virt_irq;
-static unsigned int nr_virt_irqs;
-
-void
-virt_irq_init(void)
-{
-	int i;
-
-	if ((virt_irq_max == 0) || (virt_irq_max > (NR_IRQS - 1)))
-		virt_irq_max = NR_IRQS - 1;
-	max_virt_irq = virt_irq_max - __irq_offset_value;
-	nr_virt_irqs = max_virt_irq - MIN_VIRT_IRQ + 1;
-
-	for (i = 0; i < NR_IRQS; i++)
-		virt_irq_to_real_map[i] = UNDEFINED_IRQ;
-}
-
-/* Create a mapping for a real_irq if it doesn't already exist.
- * Return the virtual irq as a convenience.
- */
-int virt_irq_create_mapping(unsigned int real_irq)
-{
-	unsigned int virq, first_virq;
-	static int warned;
-
-	if (ppc64_interrupt_controller == IC_OPEN_PIC)
-		return real_irq;	/* no mapping for openpic (for now) */
-
-	if (ppc64_interrupt_controller == IC_CELL_PIC)
-		return real_irq;	/* no mapping for iic either */
-
-	/* don't map interrupts < MIN_VIRT_IRQ */
-	if (real_irq < MIN_VIRT_IRQ) {
-		virt_irq_to_real_map[real_irq] = real_irq;
-		return real_irq;
-	}
-
-	/* map to a number between MIN_VIRT_IRQ and max_virt_irq */
-	virq = real_irq;
-	if (virq > max_virt_irq)
-		virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
-
-	/* search for this number or a free slot */
-	first_virq = virq;
-	while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {
-		if (virt_irq_to_real_map[virq] == real_irq)
-			return virq;
-		if (++virq > max_virt_irq)
-			virq = MIN_VIRT_IRQ;
-		if (virq == first_virq)
-			goto nospace;	/* oops, no free slots */
-	}
-
-	virt_irq_to_real_map[virq] = real_irq;
-	return virq;
-
- nospace:
-	if (!warned) {
-		printk(KERN_CRIT "Interrupt table is full\n");
-		printk(KERN_CRIT "Increase virt_irq_max (currently %d) "
-		       "in your kernel sources and rebuild.\n", virt_irq_max);
-		warned = 1;
-	}
-	return NO_IRQ;
-}
-
-/*
- * In most cases will get a hit on the very first slot checked in the
- * virt_irq_to_real_map.  Only when there are a large number of
- * IRQs will this be expensive.
- */
-unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
-{
-	unsigned int virq;
-	unsigned int first_virq;
-
-	virq = real_irq;
-
-	if (virq > max_virt_irq)
-		virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
-
-	first_virq = virq;
-
-	do {
-		if (virt_irq_to_real_map[virq] == real_irq)
-			return virq;
-
-		virq++;
-
-		if (virq >= max_virt_irq)
-			virq = 0;
-
-	} while (first_virq != virq);
-
-	return NO_IRQ;
-
-}
-#endif /* CONFIG_PPC64 */
 
 #ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
@@ -431,6 +313,503 @@
 }
 EXPORT_SYMBOL(do_softirq);
 
+
+/*
+ * IRQ controller and virtual interrupts
+ */
+
+#ifdef CONFIG_PPC_MERGE
+
+static LIST_HEAD(irq_hosts);
+static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED;
+
+struct irq_map_entry irq_map[NR_IRQS];
+static unsigned int irq_virq_count = NR_IRQS;
+static struct irq_host *irq_default_host;
+
+struct irq_host *irq_alloc_host(unsigned int revmap_type,
+				unsigned int revmap_arg,
+				struct irq_host_ops *ops,
+				irq_hw_number_t inval_irq)
+{
+	struct irq_host *host;
+	unsigned int size = sizeof(struct irq_host);
+	unsigned int i;
+	unsigned int *rmap;
+	unsigned long flags;
+
+	/* Allocate structure and revmap table if using linear mapping */
+	if (revmap_type == IRQ_HOST_MAP_LINEAR)
+		size += revmap_arg * sizeof(unsigned int);
+	if (mem_init_done)
+		host = kzalloc(size, GFP_KERNEL);
+	else {
+		host = alloc_bootmem(size);
+		if (host)
+			memset(host, 0, size);
+	}
+	if (host == NULL)
+		return NULL;
+
+	/* Fill structure */
+	host->revmap_type = revmap_type;
+	host->inval_irq = inval_irq;
+	host->ops = ops;
+
+	spin_lock_irqsave(&irq_big_lock, flags);
+
+	/* If it's a legacy controller, check for duplicates and
+	 * mark it as allocated (we use irq 0 host pointer for that
+	 */
+	if (revmap_type == IRQ_HOST_MAP_LEGACY) {
+		if (irq_map[0].host != NULL) {
+			spin_unlock_irqrestore(&irq_big_lock, flags);
+			/* If we are early boot, we can't free the structure,
+			 * too bad...
+			 * this will be fixed once slab is made available early
+			 * instead of the current cruft
+			 */
+			if (mem_init_done)
+				kfree(host);
+			return NULL;
+		}
+		irq_map[0].host = host;
+	}
+
+	list_add(&host->link, &irq_hosts);
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+
+	/* Additional setups per revmap type */
+	switch(revmap_type) {
+	case IRQ_HOST_MAP_LEGACY:
+		/* 0 is always the invalid number for legacy */
+		host->inval_irq = 0;
+		/* setup us as the host for all legacy interrupts */
+		for (i = 1; i < NUM_ISA_INTERRUPTS; i++) {
+			irq_map[i].hwirq = 0;
+			smp_wmb();
+			irq_map[i].host = host;
+			smp_wmb();
+
+			/* Clear some flags */
+			get_irq_desc(i)->status
+				&= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+
+			/* Legacy flags are left to default at this point,
+			 * one can then use irq_create_mapping() to
+			 * explicitely change them
+			 */
+			ops->map(host, i, i, 0);
+		}
+		break;
+	case IRQ_HOST_MAP_LINEAR:
+		rmap = (unsigned int *)(host + 1);
+		for (i = 0; i < revmap_arg; i++)
+			rmap[i] = IRQ_NONE;
+		host->revmap_data.linear.size = revmap_arg;
+		smp_wmb();
+		host->revmap_data.linear.revmap = rmap;
+		break;
+	default:
+		break;
+	}
+
+	pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host);
+
+	return host;
+}
+
+struct irq_host *irq_find_host(struct device_node *node)
+{
+	struct irq_host *h, *found = NULL;
+	unsigned long flags;
+
+	/* We might want to match the legacy controller last since
+	 * it might potentially be set to match all interrupts in
+	 * the absence of a device node. This isn't a problem so far
+	 * yet though...
+	 */
+	spin_lock_irqsave(&irq_big_lock, flags);
+	list_for_each_entry(h, &irq_hosts, link)
+		if (h->ops->match == NULL || h->ops->match(h, node)) {
+			found = h;
+			break;
+		}
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+	return found;
+}
+EXPORT_SYMBOL_GPL(irq_find_host);
+
+void irq_set_default_host(struct irq_host *host)
+{
+	pr_debug("irq: Default host set to @0x%p\n", host);
+
+	irq_default_host = host;
+}
+
+void irq_set_virq_count(unsigned int count)
+{
+	pr_debug("irq: Trying to set virq count to %d\n", count);
+
+	BUG_ON(count < NUM_ISA_INTERRUPTS);
+	if (count < NR_IRQS)
+		irq_virq_count = count;
+}
+
+unsigned int irq_create_mapping(struct irq_host *host,
+				irq_hw_number_t hwirq,
+				unsigned int flags)
+{
+	unsigned int virq, hint;
+
+	pr_debug("irq: irq_create_mapping(0x%p, 0x%lx, 0x%x)\n",
+		 host, hwirq, flags);
+
+	/* Look for default host if nececssary */
+	if (host == NULL)
+		host = irq_default_host;
+	if (host == NULL) {
+		printk(KERN_WARNING "irq_create_mapping called for"
+		       " NULL host, hwirq=%lx\n", hwirq);
+		WARN_ON(1);
+		return NO_IRQ;
+	}
+	pr_debug("irq: -> using host @%p\n", host);
+
+	/* Check if mapping already exist, if it does, call
+	 * host->ops->map() to update the flags
+	 */
+	virq = irq_find_mapping(host, hwirq);
+	if (virq != IRQ_NONE) {
+		pr_debug("irq: -> existing mapping on virq %d\n", virq);
+		host->ops->map(host, virq, hwirq, flags);
+		return virq;
+	}
+
+	/* Get a virtual interrupt number */
+	if (host->revmap_type == IRQ_HOST_MAP_LEGACY) {
+		/* Handle legacy */
+		virq = (unsigned int)hwirq;
+		if (virq == 0 || virq >= NUM_ISA_INTERRUPTS)
+			return NO_IRQ;
+		return virq;
+	} else {
+		/* Allocate a virtual interrupt number */
+		hint = hwirq % irq_virq_count;
+		virq = irq_alloc_virt(host, 1, hint);
+		if (virq == NO_IRQ) {
+			pr_debug("irq: -> virq allocation failed\n");
+			return NO_IRQ;
+		}
+	}
+	pr_debug("irq: -> obtained virq %d\n", virq);
+
+	/* Clear some flags */
+	get_irq_desc(virq)->status &= ~(IRQ_NOREQUEST | IRQ_LEVEL);
+
+	/* map it */
+	if (host->ops->map(host, virq, hwirq, flags)) {
+		pr_debug("irq: -> mapping failed, freeing\n");
+		irq_free_virt(virq, 1);
+		return NO_IRQ;
+	}
+	smp_wmb();
+	irq_map[virq].hwirq = hwirq;
+	smp_mb();
+	return virq;
+}
+EXPORT_SYMBOL_GPL(irq_create_mapping);
+
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  u32 *intspec, unsigned int intsize)
+{
+	struct irq_host *host;
+	irq_hw_number_t hwirq;
+	unsigned int flags = IRQ_TYPE_NONE;
+
+	if (controller == NULL)
+		host = irq_default_host;
+	else
+		host = irq_find_host(controller);
+	if (host == NULL)
+		return NO_IRQ;
+
+	/* If host has no translation, then we assume interrupt line */
+	if (host->ops->xlate == NULL)
+		hwirq = intspec[0];
+	else {
+		if (host->ops->xlate(host, controller, intspec, intsize,
+				     &hwirq, &flags))
+			return NO_IRQ;
+	}
+
+	return irq_create_mapping(host, hwirq, flags);
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
+
+unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
+{
+	struct of_irq oirq;
+
+	if (of_irq_map_one(dev, index, &oirq))
+		return NO_IRQ;
+
+	return irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+}
+EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
+
+void irq_dispose_mapping(unsigned int virq)
+{
+	struct irq_host *host = irq_map[virq].host;
+	irq_hw_number_t hwirq;
+	unsigned long flags;
+
+	WARN_ON (host == NULL);
+	if (host == NULL)
+		return;
+
+	/* Never unmap legacy interrupts */
+	if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
+		return;
+
+	/* remove chip and handler */
+	set_irq_chip_and_handler(virq, NULL, NULL);
+
+	/* Make sure it's completed */
+	synchronize_irq(virq);
+
+	/* Tell the PIC about it */
+	if (host->ops->unmap)
+		host->ops->unmap(host, virq);
+	smp_mb();
+
+	/* Clear reverse map */
+	hwirq = irq_map[virq].hwirq;
+	switch(host->revmap_type) {
+	case IRQ_HOST_MAP_LINEAR:
+		if (hwirq < host->revmap_data.linear.size)
+			host->revmap_data.linear.revmap[hwirq] = IRQ_NONE;
+		break;
+	case IRQ_HOST_MAP_TREE:
+		/* Check if radix tree allocated yet */
+		if (host->revmap_data.tree.gfp_mask == 0)
+			break;
+		/* XXX radix tree not safe ! remove lock whem it becomes safe
+		 * and use some RCU sync to make sure everything is ok before we
+		 * can re-use that map entry
+		 */
+		spin_lock_irqsave(&irq_big_lock, flags);
+		radix_tree_delete(&host->revmap_data.tree, hwirq);
+		spin_unlock_irqrestore(&irq_big_lock, flags);
+		break;
+	}
+
+	/* Destroy map */
+	smp_mb();
+	irq_map[virq].hwirq = host->inval_irq;
+
+	/* Set some flags */
+	get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+
+	/* Free it */
+	irq_free_virt(virq, 1);
+}
+EXPORT_SYMBOL_GPL(irq_dispose_mapping);
+
+unsigned int irq_find_mapping(struct irq_host *host,
+			      irq_hw_number_t hwirq)
+{
+	unsigned int i;
+	unsigned int hint = hwirq % irq_virq_count;
+
+	/* Look for default host if nececssary */
+	if (host == NULL)
+		host = irq_default_host;
+	if (host == NULL)
+		return NO_IRQ;
+
+	/* legacy -> bail early */
+	if (host->revmap_type == IRQ_HOST_MAP_LEGACY)
+		return hwirq;
+
+	/* Slow path does a linear search of the map */
+	if (hint < NUM_ISA_INTERRUPTS)
+		hint = NUM_ISA_INTERRUPTS;
+	i = hint;
+	do  {
+		if (irq_map[i].host == host &&
+		    irq_map[i].hwirq == hwirq)
+			return i;
+		i++;
+		if (i >= irq_virq_count)
+			i = NUM_ISA_INTERRUPTS;
+	} while(i != hint);
+	return NO_IRQ;
+}
+EXPORT_SYMBOL_GPL(irq_find_mapping);
+
+
+unsigned int irq_radix_revmap(struct irq_host *host,
+			      irq_hw_number_t hwirq)
+{
+	struct radix_tree_root *tree;
+	struct irq_map_entry *ptr;
+	unsigned int virq;
+	unsigned long flags;
+
+	WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE);
+
+	/* Check if the radix tree exist yet. We test the value of
+	 * the gfp_mask for that. Sneaky but saves another int in the
+	 * structure. If not, we fallback to slow mode
+	 */
+	tree = &host->revmap_data.tree;
+	if (tree->gfp_mask == 0)
+		return irq_find_mapping(host, hwirq);
+
+	/* XXX Current radix trees are NOT SMP safe !!! Remove that lock
+	 * when that is fixed (when Nick's patch gets in
+	 */
+	spin_lock_irqsave(&irq_big_lock, flags);
+
+	/* Now try to resolve */
+	ptr = radix_tree_lookup(tree, hwirq);
+	/* Found it, return */
+	if (ptr) {
+		virq = ptr - irq_map;
+		goto bail;
+	}
+
+	/* If not there, try to insert it */
+	virq = irq_find_mapping(host, hwirq);
+	if (virq != NO_IRQ)
+		radix_tree_insert(tree, virq, &irq_map[virq]);
+ bail:
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+	return virq;
+}
+
+unsigned int irq_linear_revmap(struct irq_host *host,
+			       irq_hw_number_t hwirq)
+{
+	unsigned int *revmap;
+
+	WARN_ON(host->revmap_type != IRQ_HOST_MAP_LINEAR);
+
+	/* Check revmap bounds */
+	if (unlikely(hwirq >= host->revmap_data.linear.size))
+		return irq_find_mapping(host, hwirq);
+
+	/* Check if revmap was allocated */
+	revmap = host->revmap_data.linear.revmap;
+	if (unlikely(revmap == NULL))
+		return irq_find_mapping(host, hwirq);
+
+	/* Fill up revmap with slow path if no mapping found */
+	if (unlikely(revmap[hwirq] == NO_IRQ))
+		revmap[hwirq] = irq_find_mapping(host, hwirq);
+
+	return revmap[hwirq];
+}
+
+unsigned int irq_alloc_virt(struct irq_host *host,
+			    unsigned int count,
+			    unsigned int hint)
+{
+	unsigned long flags;
+	unsigned int i, j, found = NO_IRQ;
+	unsigned int limit = irq_virq_count - count;
+
+	if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS))
+		return NO_IRQ;
+
+	spin_lock_irqsave(&irq_big_lock, flags);
+
+	/* Use hint for 1 interrupt if any */
+	if (count == 1 && hint >= NUM_ISA_INTERRUPTS &&
+	    hint < irq_virq_count && irq_map[hint].host == NULL) {
+		found = hint;
+		goto hint_found;
+	}
+
+	/* Look for count consecutive numbers in the allocatable
+	 * (non-legacy) space
+	 */
+	for (i = NUM_ISA_INTERRUPTS; i <= limit; ) {
+		for (j = i; j < (i + count); j++)
+			if (irq_map[j].host != NULL) {
+				i = j + 1;
+				continue;
+			}
+		found = i;
+		break;
+	}
+	if (found == NO_IRQ) {
+		spin_unlock_irqrestore(&irq_big_lock, flags);
+		return NO_IRQ;
+	}
+ hint_found:
+	for (i = found; i < (found + count); i++) {
+		irq_map[i].hwirq = host->inval_irq;
+		smp_wmb();
+		irq_map[i].host = host;
+	}
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+	return found;
+}
+
+void irq_free_virt(unsigned int virq, unsigned int count)
+{
+	unsigned long flags;
+	unsigned int i;
+
+	WARN_ON (virq < NUM_ISA_INTERRUPTS);
+	WARN_ON (count == 0 || (virq + count) > irq_virq_count);
+
+	spin_lock_irqsave(&irq_big_lock, flags);
+	for (i = virq; i < (virq + count); i++) {
+		struct irq_host *host;
+
+		if (i < NUM_ISA_INTERRUPTS ||
+		    (virq + count) > irq_virq_count)
+			continue;
+
+		host = irq_map[i].host;
+		irq_map[i].hwirq = host->inval_irq;
+		smp_wmb();
+		irq_map[i].host = NULL;
+	}
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+}
+
+void irq_early_init(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < NR_IRQS; i++)
+		get_irq_desc(i)->status |= IRQ_NOREQUEST;
+}
+
+/* We need to create the radix trees late */
+static int irq_late_init(void)
+{
+	struct irq_host *h;
+	unsigned long flags;
+
+	spin_lock_irqsave(&irq_big_lock, flags);
+	list_for_each_entry(h, &irq_hosts, link) {
+		if (h->revmap_type == IRQ_HOST_MAP_TREE)
+			INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
+	}
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+
+	return 0;
+}
+arch_initcall(irq_late_init);
+
+#endif /* CONFIG_PPC_MERGE */
+
 #ifdef CONFIG_PCI_MSI
 int pci_enable_msi(struct pci_dev * pdev)
 {
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4cf0b97..7e98e77 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -28,6 +28,7 @@
 	struct device_node		*np;
 	unsigned int			speed;
 	unsigned int			clock;
+	int				irq_check_parent;
 	phys_addr_t			taddr;
 } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
 static unsigned int legacy_serial_count;
@@ -36,7 +37,7 @@
 static int __init add_legacy_port(struct device_node *np, int want_index,
 				  int iotype, phys_addr_t base,
 				  phys_addr_t taddr, unsigned long irq,
-				  upf_t flags)
+				  upf_t flags, int irq_check_parent)
 {
 	u32 *clk, *spd, clock = BASE_BAUD * 16;
 	int index;
@@ -68,7 +69,7 @@
 	if (legacy_serial_infos[index].np != 0) {
 		/* if we still have some room, move it, else override */
 		if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
-			printk(KERN_INFO "Moved legacy port %d -> %d\n",
+			printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
 			       index, legacy_serial_count);
 			legacy_serial_ports[legacy_serial_count] =
 				legacy_serial_ports[index];
@@ -76,7 +77,7 @@
 				legacy_serial_infos[index];
 			legacy_serial_count++;
 		} else {
-			printk(KERN_INFO "Replacing legacy port %d\n", index);
+			printk(KERN_DEBUG "Replacing legacy port %d\n", index);
 		}
 	}
 
@@ -95,10 +96,11 @@
 	legacy_serial_infos[index].np = of_node_get(np);
 	legacy_serial_infos[index].clock = clock;
 	legacy_serial_infos[index].speed = spd ? *spd : 0;
+	legacy_serial_infos[index].irq_check_parent = irq_check_parent;
 
-	printk(KERN_INFO "Found legacy serial port %d for %s\n",
+	printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
 	       index, np->full_name);
-	printk(KERN_INFO "  %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
+	printk(KERN_DEBUG "  %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
 	       (iotype == UPIO_PORT) ? "port" : "mem",
 	       (unsigned long long)base, (unsigned long long)taddr, irq,
 	       legacy_serial_ports[index].uartclk,
@@ -126,11 +128,13 @@
 		return -1;
 
 	addr = of_translate_address(soc_dev, addrp);
+	if (addr == OF_BAD_ADDR)
+		return -1;
 
 	/* Add port, irq will be dealt with later. We passed a translated
 	 * IO port value. It will be fixed up later along with the irq
 	 */
-	return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags);
+	return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
 }
 
 static int __init add_legacy_isa_port(struct device_node *np,
@@ -141,6 +145,8 @@
 	int index = -1;
 	phys_addr_t taddr;
 
+	DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
+
 	/* Get the ISA port number */
 	reg = (u32 *)get_property(np, "reg", NULL);
 	if (reg == NULL)
@@ -161,9 +167,12 @@
 
 	/* Translate ISA address */
 	taddr = of_translate_address(np, reg);
+	if (taddr == OF_BAD_ADDR)
+		return -1;
 
 	/* Add port, irq will be dealt with later */
-	return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF);
+	return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr,
+			       NO_IRQ, UPF_BOOT_AUTOCONF, 0);
 
 }
 
@@ -176,6 +185,8 @@
 	unsigned int flags;
 	int iotype, index = -1, lindex = 0;
 
+	DBG(" -> add_legacy_pci_port(%s)\n", np->full_name);
+
 	/* We only support ports that have a clock frequency properly
 	 * encoded in the device-tree (that is have an fcode). Anything
 	 * else can't be used that early and will be normally probed by
@@ -194,6 +205,8 @@
 	/* We only support BAR 0 for now */
 	iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
 	addr = of_translate_address(pci_dev, addrp);
+	if (addr == OF_BAD_ADDR)
+		return -1;
 
 	/* Set the IO base to the same as the translated address for MMIO,
 	 * or to the domain local IO base for PIO (it will be fixed up later)
@@ -231,7 +244,8 @@
 	/* Add port, irq will be dealt with later. We passed a translated
 	 * IO port value. It will be fixed up later along with the irq
 	 */
-	return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF);
+	return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
+			       UPF_BOOT_AUTOCONF, np != pci_dev);
 }
 #endif
 
@@ -362,27 +376,22 @@
 				  struct device_node *np,
 				  struct plat_serial8250_port *port)
 {
+	unsigned int virq;
+
 	DBG("fixup_port_irq(%d)\n", index);
 
-	/* Check for interrupts in that node */
-	if (np->n_intrs > 0) {
-		port->irq = np->intrs[0].line;
-		DBG(" port %d (%s), irq=%d\n",
-		    index, np->full_name, port->irq);
-		return;
+	virq = irq_of_parse_and_map(np, 0);
+	if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) {
+		np = of_get_parent(np);
+		if (np == NULL)
+			return;
+		virq = irq_of_parse_and_map(np, 0);
+		of_node_put(np);
 	}
-
-	/* Check for interrupts in the parent */
-	np = of_get_parent(np);
-	if (np == NULL)
+	if (virq == NO_IRQ)
 		return;
 
-	if (np->n_intrs > 0) {
-		port->irq = np->intrs[0].line;
-		DBG(" port %d (%s), irq=%d\n",
-		    index, np->full_name, port->irq);
-	}
-	of_node_put(np);
+	port->irq = virq;
 }
 
 static void __init fixup_port_pio(int index,
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 0c3c70d..bfb407f 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -51,12 +51,14 @@
 	mtlr	r0
 	blr
 
-_GLOBAL(call___do_IRQ)
+_GLOBAL(call_handle_irq)
+	ld	r8,0(r7)
 	mflr	r0
 	std	r0,16(r1)
-	stdu	r1,THREAD_SIZE-112(r5)
-	mr	r1,r5
-	bl	.__do_IRQ
+	mtctr	r8
+	stdu	r1,THREAD_SIZE-112(r6)
+	mr	r1,r6
+	bctrl
 	ld	r1,0(r1)
 	ld	r0,16(r1)
 	mtlr	r0
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 1333335..898dae8a 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -1404,6 +1404,43 @@
 	/* XXX FIXME - update OF device tree node interrupt property */
 }
 
+#ifdef CONFIG_PPC_MERGE
+/* XXX This is a copy of the ppc64 version. This is temporary until we start
+ * merging the 2 PCI layers
+ */
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+	struct of_irq oirq;
+	unsigned int virq;
+
+	DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+
+	if (of_irq_map_pci(pci_dev, &oirq)) {
+		DBG(" -> failed !\n");
+		return -1;
+	}
+
+	DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+	    oirq.size, oirq.specifier[0], oirq.controller->full_name);
+
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+	if(virq == NO_IRQ) {
+		DBG(" -> failed to map !\n");
+		return -1;
+	}
+	pci_dev->irq = virq;
+	pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
+
+	return 0;
+}
+EXPORT_SYMBOL(pci_read_irq_line);
+#endif /* CONFIG_PPC_MERGE */
+
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
 	u16 cmd, old_cmd;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index bea8451..efc0b55 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -398,12 +398,8 @@
 	} else {
 		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
 		dev->rom_base_reg = PCI_ROM_ADDRESS;
+		/* Maybe do a default OF mapping here */
 		dev->irq = NO_IRQ;
-		if (node->n_intrs > 0) {
-			dev->irq = node->intrs[0].line;
-			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
-					      dev->irq);
-		}
 	}
 
 	pci_parse_of_addrs(node, dev);
@@ -1288,23 +1284,26 @@
  */
 int pci_read_irq_line(struct pci_dev *pci_dev)
 {
-	u8 intpin;
-	struct device_node *node;
+	struct of_irq oirq;
+	unsigned int virq;
 
-    	pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin);
-	if (intpin == 0)
-		return 0;
+	DBG("Try to map irq for %s...\n", pci_name(pci_dev));
 
-	node = pci_device_to_OF_node(pci_dev);
-	if (node == NULL)
+	if (of_irq_map_pci(pci_dev, &oirq)) {
+		DBG(" -> failed !\n");
 		return -1;
+	}
 
-	if (node->n_intrs == 0)
+	DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+	    oirq.size, oirq.specifier[0], oirq.controller->full_name);
+
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size);
+	if(virq == NO_IRQ) {
+		DBG(" -> failed to map !\n");
 		return -1;
-
-	pci_dev->irq = node->intrs[0].line;
-
-	pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq);
+	}
+	pci_dev->irq = virq;
+	pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4c524cb..a1787ff 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
+#include <linux/irq.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -86,424 +87,6 @@
 /* export that to outside world */
 struct device_node *of_chosen;
 
-struct device_node *dflt_interrupt_controller;
-int num_interrupt_controllers;
-
-/*
- * Wrapper for allocating memory for various data that needs to be
- * attached to device nodes as they are processed at boot or when
- * added to the device tree later (e.g. DLPAR).  At boot there is
- * already a region reserved so we just increment *mem_start by size;
- * otherwise we call kmalloc.
- */
-static void * prom_alloc(unsigned long size, unsigned long *mem_start)
-{
-	unsigned long tmp;
-
-	if (!mem_start)
-		return kmalloc(size, GFP_KERNEL);
-
-	tmp = *mem_start;
-	*mem_start += size;
-	return (void *)tmp;
-}
-
-/*
- * Find the device_node with a given phandle.
- */
-static struct device_node * find_phandle(phandle ph)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->linux_phandle == ph)
-			return np;
-	return NULL;
-}
-
-/*
- * Find the interrupt parent of a node.
- */
-static struct device_node * __devinit intr_parent(struct device_node *p)
-{
-	phandle *parp;
-
-	parp = (phandle *) get_property(p, "interrupt-parent", NULL);
-	if (parp == NULL)
-		return p->parent;
-	p = find_phandle(*parp);
-	if (p != NULL)
-		return p;
-	/*
-	 * On a powermac booted with BootX, we don't get to know the
-	 * phandles for any nodes, so find_phandle will return NULL.
-	 * Fortunately these machines only have one interrupt controller
-	 * so there isn't in fact any ambiguity.  -- paulus
-	 */
-	if (num_interrupt_controllers == 1)
-		p = dflt_interrupt_controller;
-	return p;
-}
-
-/*
- * Find out the size of each entry of the interrupts property
- * for a node.
- */
-int __devinit prom_n_intr_cells(struct device_node *np)
-{
-	struct device_node *p;
-	unsigned int *icp;
-
-	for (p = np; (p = intr_parent(p)) != NULL; ) {
-		icp = (unsigned int *)
-			get_property(p, "#interrupt-cells", NULL);
-		if (icp != NULL)
-			return *icp;
-		if (get_property(p, "interrupt-controller", NULL) != NULL
-		    || get_property(p, "interrupt-map", NULL) != NULL) {
-			printk("oops, node %s doesn't have #interrupt-cells\n",
-			       p->full_name);
-			return 1;
-		}
-	}
-#ifdef DEBUG_IRQ
-	printk("prom_n_intr_cells failed for %s\n", np->full_name);
-#endif
-	return 1;
-}
-
-/*
- * Map an interrupt from a device up to the platform interrupt
- * descriptor.
- */
-static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictrler,
-				   struct device_node *np, unsigned int *ints,
-				   int nintrc)
-{
-	struct device_node *p, *ipar;
-	unsigned int *imap, *imask, *ip;
-	int i, imaplen, match;
-	int newintrc = 0, newaddrc = 0;
-	unsigned int *reg;
-	int naddrc;
-
-	reg = (unsigned int *) get_property(np, "reg", NULL);
-	naddrc = prom_n_addr_cells(np);
-	p = intr_parent(np);
-	while (p != NULL) {
-		if (get_property(p, "interrupt-controller", NULL) != NULL)
-			/* this node is an interrupt controller, stop here */
-			break;
-		imap = (unsigned int *)
-			get_property(p, "interrupt-map", &imaplen);
-		if (imap == NULL) {
-			p = intr_parent(p);
-			continue;
-		}
-		imask = (unsigned int *)
-			get_property(p, "interrupt-map-mask", NULL);
-		if (imask == NULL) {
-			printk("oops, %s has interrupt-map but no mask\n",
-			       p->full_name);
-			return 0;
-		}
-		imaplen /= sizeof(unsigned int);
-		match = 0;
-		ipar = NULL;
-		while (imaplen > 0 && !match) {
-			/* check the child-interrupt field */
-			match = 1;
-			for (i = 0; i < naddrc && match; ++i)
-				match = ((reg[i] ^ imap[i]) & imask[i]) == 0;
-			for (; i < naddrc + nintrc && match; ++i)
-				match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0;
-			imap += naddrc + nintrc;
-			imaplen -= naddrc + nintrc;
-			/* grab the interrupt parent */
-			ipar = find_phandle((phandle) *imap++);
-			--imaplen;
-			if (ipar == NULL && num_interrupt_controllers == 1)
-				/* cope with BootX not giving us phandles */
-				ipar = dflt_interrupt_controller;
-			if (ipar == NULL) {
-				printk("oops, no int parent %x in map of %s\n",
-				       imap[-1], p->full_name);
-				return 0;
-			}
-			/* find the parent's # addr and intr cells */
-			ip = (unsigned int *)
-				get_property(ipar, "#interrupt-cells", NULL);
-			if (ip == NULL) {
-				printk("oops, no #interrupt-cells on %s\n",
-				       ipar->full_name);
-				return 0;
-			}
-			newintrc = *ip;
-			ip = (unsigned int *)
-				get_property(ipar, "#address-cells", NULL);
-			newaddrc = (ip == NULL)? 0: *ip;
-			imap += newaddrc + newintrc;
-			imaplen -= newaddrc + newintrc;
-		}
-		if (imaplen < 0) {
-			printk("oops, error decoding int-map on %s, len=%d\n",
-			       p->full_name, imaplen);
-			return 0;
-		}
-		if (!match) {
-#ifdef DEBUG_IRQ
-			printk("oops, no match in %s int-map for %s\n",
-			       p->full_name, np->full_name);
-#endif
-			return 0;
-		}
-		p = ipar;
-		naddrc = newaddrc;
-		nintrc = newintrc;
-		ints = imap - nintrc;
-		reg = ints - naddrc;
-	}
-	if (p == NULL) {
-#ifdef DEBUG_IRQ
-		printk("hmmm, int tree for %s doesn't have ctrler\n",
-		       np->full_name);
-#endif
-		return 0;
-	}
-	*irq = ints;
-	*ictrler = p;
-	return nintrc;
-}
-
-static unsigned char map_isa_senses[4] = {
-	IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
-	IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
-	IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE,
-	IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE
-};
-
-static unsigned char map_mpic_senses[4] = {
-	IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE,
-	IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE,
-	/* 2 seems to be used for the 8259 cascade... */
-	IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE,
-	IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE,
-};
-
-static int __devinit finish_node_interrupts(struct device_node *np,
-					    unsigned long *mem_start,
-					    int measure_only)
-{
-	unsigned int *ints;
-	int intlen, intrcells, intrcount;
-	int i, j, n, sense;
-	unsigned int *irq, virq;
-	struct device_node *ic;
-	int trace = 0;
-
-	//#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0)
-#define TRACE(fmt...)
-
-	if (!strcmp(np->name, "smu-doorbell"))
-		trace = 1;
-
-	TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n",
-	      num_interrupt_controllers);
-
-	if (num_interrupt_controllers == 0) {
-		/*
-		 * Old machines just have a list of interrupt numbers
-		 * and no interrupt-controller nodes.
-		 */
-		ints = (unsigned int *) get_property(np, "AAPL,interrupts",
-						     &intlen);
-		/* XXX old interpret_pci_props looked in parent too */
-		/* XXX old interpret_macio_props looked for interrupts
-		   before AAPL,interrupts */
-		if (ints == NULL)
-			ints = (unsigned int *) get_property(np, "interrupts",
-							     &intlen);
-		if (ints == NULL)
-			return 0;
-
-		np->n_intrs = intlen / sizeof(unsigned int);
-		np->intrs = prom_alloc(np->n_intrs * sizeof(np->intrs[0]),
-				       mem_start);
-		if (!np->intrs)
-			return -ENOMEM;
-		if (measure_only)
-			return 0;
-
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ints++;
-			np->intrs[i].sense = IRQ_SENSE_LEVEL
-				| IRQ_POLARITY_NEGATIVE;
-		}
-		return 0;
-	}
-
-	ints = (unsigned int *) get_property(np, "interrupts", &intlen);
-	TRACE("ints=%p, intlen=%d\n", ints, intlen);
-	if (ints == NULL)
-		return 0;
-	intrcells = prom_n_intr_cells(np);
-	intlen /= intrcells * sizeof(unsigned int);
-	TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen);
-	np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start);
-	if (!np->intrs)
-		return -ENOMEM;
-
-	if (measure_only)
-		return 0;
-
-	intrcount = 0;
-	for (i = 0; i < intlen; ++i, ints += intrcells) {
-		n = map_interrupt(&irq, &ic, np, ints, intrcells);
-		TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n);
-		if (n <= 0)
-			continue;
-
-		/* don't map IRQ numbers under a cascaded 8259 controller */
-		if (ic && device_is_compatible(ic, "chrp,iic")) {
-			np->intrs[intrcount].line = irq[0];
-			sense = (n > 1)? (irq[1] & 3): 3;
-			np->intrs[intrcount].sense = map_isa_senses[sense];
-		} else {
-			virq = virt_irq_create_mapping(irq[0]);
-			TRACE("virq=%d\n", virq);
-#ifdef CONFIG_PPC64
-			if (virq == NO_IRQ) {
-				printk(KERN_CRIT "Could not allocate interrupt"
-				       " number for %s\n", np->full_name);
-				continue;
-			}
-#endif
-			np->intrs[intrcount].line = irq_offset_up(virq);
-			sense = (n > 1)? (irq[1] & 3): 1;
-
-			/* Apple uses bits in there in a different way, let's
-			 * only keep the real sense bit on macs
-			 */
-			if (machine_is(powermac))
-				sense &= 0x1;
-			np->intrs[intrcount].sense = map_mpic_senses[sense];
-		}
-
-#ifdef CONFIG_PPC64
-		/* We offset irq numbers for the u3 MPIC by 128 in PowerMac */
-		if (machine_is(powermac) && ic && ic->parent) {
-			char *name = get_property(ic->parent, "name", NULL);
-			if (name && !strcmp(name, "u3"))
-				np->intrs[intrcount].line += 128;
-			else if (!(name && (!strcmp(name, "mac-io") ||
-					    !strcmp(name, "u4"))))
-				/* ignore other cascaded controllers, such as
-				   the k2-sata-root */
-				break;
-		}
-#endif /* CONFIG_PPC64 */
-		if (n > 2) {
-			printk("hmmm, got %d intr cells for %s:", n,
-			       np->full_name);
-			for (j = 0; j < n; ++j)
-				printk(" %d", irq[j]);
-			printk("\n");
-		}
-		++intrcount;
-	}
-	np->n_intrs = intrcount;
-
-	return 0;
-}
-
-static int __devinit finish_node(struct device_node *np,
-				 unsigned long *mem_start,
-				 int measure_only)
-{
-	struct device_node *child;
-	int rc = 0;
-
-	rc = finish_node_interrupts(np, mem_start, measure_only);
-	if (rc)
-		goto out;
-
-	for (child = np->child; child != NULL; child = child->sibling) {
-		rc = finish_node(child, mem_start, measure_only);
-		if (rc)
-			goto out;
-	}
-out:
-	return rc;
-}
-
-static void __init scan_interrupt_controllers(void)
-{
-	struct device_node *np;
-	int n = 0;
-	char *name, *ic;
-	int iclen;
-
-	for (np = allnodes; np != NULL; np = np->allnext) {
-		ic = get_property(np, "interrupt-controller", &iclen);
-		name = get_property(np, "name", NULL);
-		/* checking iclen makes sure we don't get a false
-		   match on /chosen.interrupt_controller */
-		if ((name != NULL
-		     && strcmp(name, "interrupt-controller") == 0)
-		    || (ic != NULL && iclen == 0
-			&& strcmp(name, "AppleKiwi"))) {
-			if (n == 0)
-				dflt_interrupt_controller = np;
-			++n;
-		}
-	}
-	num_interrupt_controllers = n;
-}
-
-/**
- * finish_device_tree is called once things are running normally
- * (i.e. with text and data mapped to the address they were linked at).
- * It traverses the device tree and fills in some of the additional,
- * fields in each node like {n_}addrs and {n_}intrs, the virt interrupt
- * mapping is also initialized at this point.
- */
-void __init finish_device_tree(void)
-{
-	unsigned long start, end, size = 0;
-
-	DBG(" -> finish_device_tree\n");
-
-#ifdef CONFIG_PPC64
-	/* Initialize virtual IRQ map */
-	virt_irq_init();
-#endif
-	scan_interrupt_controllers();
-
-	/*
-	 * Finish device-tree (pre-parsing some properties etc...)
-	 * We do this in 2 passes. One with "measure_only" set, which
-	 * will only measure the amount of memory needed, then we can
-	 * allocate that memory, and call finish_node again. However,
-	 * we must be careful as most routines will fail nowadays when
-	 * prom_alloc() returns 0, so we must make sure our first pass
-	 * doesn't start at 0. We pre-initialize size to 16 for that
-	 * reason and then remove those additional 16 bytes
-	 */
-	size = 16;
-	finish_node(allnodes, &size, 1);
-	size -= 16;
-
-	if (0 == size)
-		end = start = 0;
-	else
-		end = start = (unsigned long)__va(lmb_alloc(size, 128));
-
-	finish_node(allnodes, &end, 0);
-	BUG_ON(end != start + size);
-
-	DBG(" <- finish_device_tree\n");
-}
-
 static inline char *find_flat_dt_string(u32 offset)
 {
 	return ((char *)initial_boot_params) +
@@ -1389,27 +972,6 @@
 EXPORT_SYMBOL(prom_n_size_cells);
 
 /**
- * Work out the sense (active-low level / active-high edge)
- * of each interrupt from the device tree.
- */
-void __init prom_get_irq_senses(unsigned char *senses, int off, int max)
-{
-	struct device_node *np;
-	int i, j;
-
-	/* default to level-triggered */
-	memset(senses, IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE, max - off);
-
-	for (np = allnodes; np != 0; np = np->allnext) {
-		for (j = 0; j < np->n_intrs; j++) {
-			i = np->intrs[j].line;
-			if (i >= off && i < max)
-				senses[i-off] = np->intrs[j].sense;
-		}
-	}
-}
-
-/**
  * Construct and return a list of the device_nodes with a given name.
  */
 struct device_node *find_devices(const char *name)
@@ -1808,7 +1370,6 @@
 			node->deadprops = NULL;
 		}
 	}
-	kfree(node->intrs);
 	kfree(node->full_name);
 	kfree(node->data);
 	kfree(node);
@@ -1881,13 +1442,7 @@
 #ifdef CONFIG_PPC_PSERIES
 /*
  * Fix up the uninitialized fields in a new device node:
- * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields
- *
- * A lot of boot-time code is duplicated here, because functions such
- * as finish_node_interrupts, interpret_pci_props, etc. cannot use the
- * slab allocator.
- *
- * This should probably be split up into smaller chunks.
+ * name, type and pci-specific fields
  */
 
 static int of_finish_dynamic_node(struct device_node *node)
@@ -1928,8 +1483,6 @@
 	switch (action) {
 	case PSERIES_RECONFIG_ADD:
 		err = of_finish_dynamic_node(node);
-		if (!err)
-			finish_node(node, NULL, 0);
 		if (err < 0) {
 			printk(KERN_ERR "finish_node returned %d\n", err);
 			err = NOTIFY_BAD;
@@ -1975,8 +1528,7 @@
  * Find a property with a given name for a given node
  * and return the value.
  */
-unsigned char *get_property(struct device_node *np, const char *name,
-			    int *lenp)
+void *get_property(struct device_node *np, const char *name, int *lenp)
 {
 	struct property *pp = of_find_property(np,name,lenp);
 	return pp ? pp->value : NULL;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1e95a9f..ebd501a 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1990,12 +1990,22 @@
 static void __init fixup_device_tree_maple(void)
 {
 	phandle isa;
+	u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
 	u32 isa_ranges[6];
+	char *name;
 
-	isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+	name = "/ht@0/isa@4";
+	isa = call_prom("finddevice", 1, 1, ADDR(name));
+	if (!PHANDLE_VALID(isa)) {
+		name = "/ht@0/isa@6";
+		isa = call_prom("finddevice", 1, 1, ADDR(name));
+		rloc = 0x01003000; /* IO space; PCI device = 6 */
+	}
 	if (!PHANDLE_VALID(isa))
 		return;
 
+	if (prom_getproplen(isa, "ranges") != 12)
+		return;
 	if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
 		== PROM_ERROR)
 		return;
@@ -2005,15 +2015,15 @@
 		isa_ranges[2] != 0x00010000)
 		return;
 
-	prom_printf("fixing up bogus ISA range on Maple...\n");
+	prom_printf("Fixing up bogus ISA range on Maple/Apache...\n");
 
 	isa_ranges[0] = 0x1;
 	isa_ranges[1] = 0x0;
-	isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+	isa_ranges[2] = rloc;
 	isa_ranges[3] = 0x0;
 	isa_ranges[4] = 0x0;
 	isa_ranges[5] = 0x00010000;
-	prom_setprop(isa, "/ht@0/isa@4", "ranges",
+	prom_setprop(isa, name, "ranges",
 			isa_ranges, sizeof(isa_ranges));
 }
 #else
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 45df420..21009b1 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -38,14 +38,6 @@
 static void of_dump_addr(const char *s, u32 *addr, int na) { }
 #endif
 
-/* Read a big address */
-static inline u64 of_read_addr(u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
 
 /* Callbacks for bus specific translators */
 struct of_bus {
@@ -77,9 +69,9 @@
 {
 	u64 cp, s, da;
 
-	cp = of_read_addr(range, na);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr, na);
+	cp = of_read_number(range, na);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr, na);
 
 	DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
 	    cp, s, da);
@@ -91,7 +83,7 @@
 
 static int of_bus_default_translate(u32 *addr, u64 offset, int na)
 {
-	u64 a = of_read_addr(addr, na);
+	u64 a = of_read_number(addr, na);
 	memset(addr, 0, na * 4);
 	a += offset;
 	if (na > 1)
@@ -135,9 +127,9 @@
 		return OF_BAD_ADDR;
 
 	/* Read address values, skipping high cell */
-	cp = of_read_addr(range + 1, na - 1);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr + 1, na - 1);
+	cp = of_read_number(range + 1, na - 1);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr + 1, na - 1);
 
 	DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
 
@@ -195,9 +187,9 @@
 		return OF_BAD_ADDR;
 
 	/* Read address values, skipping high cell */
-	cp = of_read_addr(range + 1, na - 1);
-	s  = of_read_addr(range + na + pna, ns);
-	da = of_read_addr(addr + 1, na - 1);
+	cp = of_read_number(range + 1, na - 1);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr + 1, na - 1);
 
 	DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
 
@@ -295,7 +287,7 @@
 	 */
 	ranges = (u32 *)get_property(parent, "ranges", &rlen);
 	if (ranges == NULL || rlen == 0) {
-		offset = of_read_addr(addr, na);
+		offset = of_read_number(addr, na);
 		memset(addr, 0, pna * 4);
 		DBG("OF: no ranges, 1:1 translation\n");
 		goto finish;
@@ -378,7 +370,7 @@
 		/* If root, we have finished */
 		if (parent == NULL) {
 			DBG("OF: reached root node\n");
-			result = of_read_addr(addr, na);
+			result = of_read_number(addr, na);
 			break;
 		}
 
@@ -442,7 +434,7 @@
 	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
 		if (i == index) {
 			if (size)
-				*size = of_read_addr(prop + na, ns);
+				*size = of_read_number(prop + na, ns);
 			if (flags)
 				*flags = bus->get_flags(prop);
 			return prop;
@@ -484,7 +476,7 @@
 	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
 		if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
 			if (size)
-				*size = of_read_addr(prop + na, ns);
+				*size = of_read_number(prop + na, ns);
 			if (flags)
 				*flags = bus->get_flags(prop);
 			return prop;
@@ -565,11 +557,414 @@
 		prop = get_property(dn, "#address-cells", NULL);
 
 	cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
-	*phys = of_read_addr(dma_window, cells);
+	*phys = of_read_number(dma_window, cells);
 
 	dma_window += cells;
 
 	prop = get_property(dn, "ibm,#dma-size-cells", NULL);
 	cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
-	*size = of_read_addr(dma_window, cells);
+	*size = of_read_number(dma_window, cells);
 }
+
+/*
+ * Interrupt remapper
+ */
+
+static unsigned int of_irq_workarounds;
+static struct device_node *of_irq_dflt_pic;
+
+static struct device_node *of_irq_find_parent(struct device_node *child)
+{
+	struct device_node *p;
+	phandle *parp;
+
+	if (!of_node_get(child))
+		return NULL;
+
+	do {
+		parp = (phandle *)get_property(child, "interrupt-parent", NULL);
+		if (parp == NULL)
+			p = of_get_parent(child);
+		else {
+			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+				p = of_node_get(of_irq_dflt_pic);
+			else
+				p = of_find_node_by_phandle(*parp);
+		}
+		of_node_put(child);
+		child = p;
+	} while (p && get_property(p, "#interrupt-cells", NULL) == NULL);
+
+	return p;
+}
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+	return (((pin - 1) + slot) % 4) + 1;
+}
+
+/* This doesn't need to be called if you don't have any special workaround
+ * flags to pass
+ */
+void of_irq_map_init(unsigned int flags)
+{
+	of_irq_workarounds = flags;
+
+	/* OldWorld, don't bother looking at other things */
+	if (flags & OF_IMAP_OLDWORLD_MAC)
+		return;
+
+	/* If we don't have phandles, let's try to locate a default interrupt
+	 * controller (happens when booting with BootX). We do a first match
+	 * here, hopefully, that only ever happens on machines with one
+	 * controller.
+	 */
+	if (flags & OF_IMAP_NO_PHANDLE) {
+		struct device_node *np;
+
+		for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
+			if (get_property(np, "interrupt-controller", NULL)
+			    == NULL)
+				continue;
+			/* Skip /chosen/interrupt-controller */
+			if (strcmp(np->name, "chosen") == 0)
+				continue;
+			/* It seems like at least one person on this planet wants
+			 * to use BootX on a machine with an AppleKiwi controller
+			 * which happens to pretend to be an interrupt
+			 * controller too.
+			 */
+			if (strcmp(np->name, "AppleKiwi") == 0)
+				continue;
+			/* I think we found one ! */
+			of_irq_dflt_pic = np;
+			break;
+		}
+	}
+
+}
+
+int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
+		   struct of_irq *out_irq)
+{
+	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+	u32 *tmp, *imap, *imask;
+	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+	int imaplen, match, i;
+
+	ipar = of_node_get(parent);
+
+	/* First get the #interrupt-cells property of the current cursor
+	 * that tells us how to interpret the passed-in intspec. If there
+	 * is none, we are nice and just walk up the tree
+	 */
+	do {
+		tmp = (u32 *)get_property(ipar, "#interrupt-cells", NULL);
+		if (tmp != NULL) {
+			intsize = *tmp;
+			break;
+		}
+		tnode = ipar;
+		ipar = of_irq_find_parent(ipar);
+		of_node_put(tnode);
+	} while (ipar);
+	if (ipar == NULL) {
+		DBG(" -> no parent found !\n");
+		goto fail;
+	}
+
+	DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
+
+	/* Look for this #address-cells. We have to implement the old linux
+	 * trick of looking for the parent here as some device-trees rely on it
+	 */
+	old = of_node_get(ipar);
+	do {
+		tmp = (u32 *)get_property(old, "#address-cells", NULL);
+		tnode = of_get_parent(old);
+		of_node_put(old);
+		old = tnode;
+	} while(old && tmp == NULL);
+	of_node_put(old);
+	old = NULL;
+	addrsize = (tmp == NULL) ? 2 : *tmp;
+
+	DBG(" -> addrsize=%d\n", addrsize);
+
+	/* Now start the actual "proper" walk of the interrupt tree */
+	while (ipar != NULL) {
+		/* Now check if cursor is an interrupt-controller and if it is
+		 * then we are done
+		 */
+		if (get_property(ipar, "interrupt-controller", NULL) != NULL) {
+			DBG(" -> got it !\n");
+			memcpy(out_irq->specifier, intspec,
+			       intsize * sizeof(u32));
+			out_irq->size = intsize;
+			out_irq->controller = ipar;
+			of_node_put(old);
+			return 0;
+		}
+
+		/* Now look for an interrupt-map */
+		imap = (u32 *)get_property(ipar, "interrupt-map", &imaplen);
+		/* No interrupt map, check for an interrupt parent */
+		if (imap == NULL) {
+			DBG(" -> no map, getting parent\n");
+			newpar = of_irq_find_parent(ipar);
+			goto skiplevel;
+		}
+		imaplen /= sizeof(u32);
+
+		/* Look for a mask */
+		imask = (u32 *)get_property(ipar, "interrupt-map-mask", NULL);
+
+		/* If we were passed no "reg" property and we attempt to parse
+		 * an interrupt-map, then #address-cells must be 0.
+		 * Fail if it's not.
+		 */
+		if (addr == NULL && addrsize != 0) {
+			DBG(" -> no reg passed in when needed !\n");
+			goto fail;
+		}
+
+		/* Parse interrupt-map */
+		match = 0;
+		while (imaplen > (addrsize + intsize + 1) && !match) {
+			/* Compare specifiers */
+			match = 1;
+			for (i = 0; i < addrsize && match; ++i) {
+				u32 mask = imask ? imask[i] : 0xffffffffu;
+				match = ((addr[i] ^ imap[i]) & mask) == 0;
+			}
+			for (; i < (addrsize + intsize) && match; ++i) {
+				u32 mask = imask ? imask[i] : 0xffffffffu;
+				match =
+				   ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
+			}
+			imap += addrsize + intsize;
+			imaplen -= addrsize + intsize;
+
+			DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+			/* Get the interrupt parent */
+			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+				newpar = of_node_get(of_irq_dflt_pic);
+			else
+				newpar = of_find_node_by_phandle((phandle)*imap);
+			imap++;
+			--imaplen;
+
+			/* Check if not found */
+			if (newpar == NULL) {
+				DBG(" -> imap parent not found !\n");
+				goto fail;
+			}
+
+			/* Get #interrupt-cells and #address-cells of new
+			 * parent
+			 */
+			tmp = (u32 *)get_property(newpar, "#interrupt-cells",
+						  NULL);
+			if (tmp == NULL) {
+				DBG(" -> parent lacks #interrupt-cells !\n");
+				goto fail;
+			}
+			newintsize = *tmp;
+			tmp = (u32 *)get_property(newpar, "#address-cells",
+						  NULL);
+			newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+			DBG(" -> newintsize=%d, newaddrsize=%d\n",
+			    newintsize, newaddrsize);
+
+			/* Check for malformed properties */
+			if (imaplen < (newaddrsize + newintsize))
+				goto fail;
+
+			imap += newaddrsize + newintsize;
+			imaplen -= newaddrsize + newintsize;
+
+			DBG(" -> imaplen=%d\n", imaplen);
+		}
+		if (!match)
+			goto fail;
+
+		of_node_put(old);
+		old = of_node_get(newpar);
+		addrsize = newaddrsize;
+		intsize = newintsize;
+		intspec = imap - intsize;
+		addr = intspec - addrsize;
+
+	skiplevel:
+		/* Iterate again with new parent */
+		DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
+		of_node_put(ipar);
+		ipar = newpar;
+		newpar = NULL;
+	}
+ fail:
+	of_node_put(ipar);
+	of_node_put(old);
+	of_node_put(newpar);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
+static int of_irq_map_oldworld(struct device_node *device, int index,
+			       struct of_irq *out_irq)
+{
+	u32 *ints;
+	int intlen;
+
+	/*
+	 * Old machines just have a list of interrupt numbers
+	 * and no interrupt-controller nodes.
+	 */
+	ints = (u32 *) get_property(device, "AAPL,interrupts", &intlen);
+	if (ints == NULL)
+		return -EINVAL;
+	intlen /= sizeof(u32);
+
+	if (index >= intlen)
+		return -EINVAL;
+
+	out_irq->controller = NULL;
+	out_irq->specifier[0] = ints[index];
+	out_irq->size = 1;
+
+	return 0;
+}
+#else /* defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) */
+static int of_irq_map_oldworld(struct device_node *device, int index,
+			       struct of_irq *out_irq)
+{
+	return -EINVAL;
+}
+#endif /* !(defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)) */
+
+int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
+{
+	struct device_node *p;
+	u32 *intspec, *tmp, intsize, intlen, *addr;
+	int res;
+
+	DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
+
+	/* OldWorld mac stuff is "special", handle out of line */
+	if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
+		return of_irq_map_oldworld(device, index, out_irq);
+
+	/* Get the interrupts property */
+	intspec = (u32 *)get_property(device, "interrupts", &intlen);
+	if (intspec == NULL)
+		return -EINVAL;
+	intlen /= sizeof(u32);
+
+	/* Get the reg property (if any) */
+	addr = (u32 *)get_property(device, "reg", NULL);
+
+	/* Look for the interrupt parent. */
+	p = of_irq_find_parent(device);
+	if (p == NULL)
+		return -EINVAL;
+
+	/* Get size of interrupt specifier */
+	tmp = (u32 *)get_property(p, "#interrupt-cells", NULL);
+	if (tmp == NULL) {
+		of_node_put(p);
+		return -EINVAL;
+	}
+	intsize = *tmp;
+
+	/* Check index */
+	if (index * intsize >= intlen)
+		return -EINVAL;
+
+	/* Get new specifier and map it */
+	res = of_irq_map_raw(p, intspec + index * intsize, addr, out_irq);
+	of_node_put(p);
+	return res;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+	struct device_node *dn, *ppnode;
+	struct pci_dev *ppdev;
+	u32 lspec;
+	u32 laddr[3];
+	u8 pin;
+	int rc;
+
+	/* Check if we have a device node, if yes, fallback to standard OF
+	 * parsing
+	 */
+	dn = pci_device_to_OF_node(pdev);
+	if (dn)
+		return of_irq_map_one(dn, 0, out_irq);
+
+	/* Ok, we don't, time to have fun. Let's start by building up an
+	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+	 * for PCI. If you do different, then don't use that routine.
+	 */
+	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+	if (rc != 0)
+		return rc;
+	/* No pin, exit */
+	if (pin == 0)
+		return -ENODEV;
+
+	/* Now we walk up the PCI tree */
+	lspec = pin;
+	for (;;) {
+		/* Get the pci_dev of our parent */
+		ppdev = pdev->bus->self;
+
+		/* Ouch, it's a host bridge... */
+		if (ppdev == NULL) {
+#ifdef CONFIG_PPC64
+			ppnode = pci_bus_to_OF_node(pdev->bus);
+#else
+			struct pci_controller *host;
+			host = pci_bus_to_host(pdev->bus);
+			ppnode = host ? host->arch_data : NULL;
+#endif
+			/* No node for host bridge ? give up */
+			if (ppnode == NULL)
+				return -EINVAL;
+		} else
+			/* We found a P2P bridge, check if it has a node */
+			ppnode = pci_device_to_OF_node(ppdev);
+
+		/* Ok, we have found a parent with a device-node, hand over to
+		 * the OF parsing code.
+		 * We build a unit address from the linux device to be used for
+		 * resolution. Note that we use the linux bus number which may
+		 * not match your firmware bus numbering.
+		 * Fortunately, in most cases, interrupt-map-mask doesn't include
+		 * the bus number as part of the matching.
+		 * You should still be careful about that though if you intend
+		 * to rely on this function (you ship  a firmware that doesn't
+		 * create device nodes for all PCI devices).
+		 */
+		if (ppnode)
+			break;
+
+		/* We can only get here if we hit a P2P bridge with no node,
+		 * let's do standard swizzling and try again
+		 */
+		lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+		pdev = ppdev;
+	}
+
+	laddr[0] = (pdev->bus->number << 16)
+		| (pdev->devfn << 8);
+	laddr[1]  = laddr[2] = 0;
+	return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 6eb7e49..cda0226 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -297,19 +297,9 @@
 	struct device_node *node;
 	struct pci_controller *phb;
 	unsigned int index;
-	unsigned int root_size_cells = 0;
-	unsigned int *opprop = NULL;
 	struct device_node *root = of_find_node_by_path("/");
 
-	if (ppc64_interrupt_controller == IC_OPEN_PIC) {
-		opprop = (unsigned int *)get_property(root,
-				"platform-open-pic", NULL);
-	}
-
-	root_size_cells = prom_n_size_cells(root);
-
 	index = 0;
-
 	for (node = of_get_next_child(root, NULL);
 	     node != NULL;
 	     node = of_get_next_child(root, node)) {
@@ -324,13 +314,6 @@
 		setup_phb(node, phb);
 		pci_process_bridge_OF_ranges(phb, node, 0);
 		pci_setup_phb_io(phb, index == 0);
-#ifdef CONFIG_PPC_PSERIES
-		/* XXX This code need serious fixing ... --BenH */
-		if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) {
-			int addr = root_size_cells * (index + 2) - 1;
-			mpic_assign_isu(pSeries_mpic, index, opprop[addr]);
-		}
-#endif
 		index++;
 	}
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index ba7cd50..e0df2ba 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -51,7 +51,6 @@
 
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
-boot_infos_t *boot_infos;
 struct ide_machdep_calls ppc_ide_md;
 
 int boot_cpuid;
@@ -240,7 +239,6 @@
 		ppc_md.init_early();
 
 	find_legacy_serial_ports();
-	finish_device_tree();
 
 	smp_setup_cpu_maps();
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index ac7276c..fd1785e 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -361,12 +361,15 @@
 
 	/*
 	 * Fill the ppc64_caches & systemcfg structures with informations
-	 * retrieved from the device-tree. Need to be called before
-	 * finish_device_tree() since the later requires some of the
-	 * informations filled up here to properly parse the interrupt tree.
+ 	 * retrieved from the device-tree.
 	 */
 	initialize_cache_info();
 
+	/*
+	 * Initialize irq remapping subsystem
+	 */
+	irq_early_init();
+
 #ifdef CONFIG_PPC_RTAS
 	/*
 	 * Initialize RTAS if available
@@ -394,12 +397,6 @@
 	find_legacy_serial_ports();
 
 	/*
-	 * "Finish" the device-tree, that is do the actual parsing of
-	 * some of the properties like the interrupt map
-	 */
-	finish_device_tree();
-
-	/*
 	 * Initialize xmon
 	 */
 #ifdef CONFIG_XMON_DEFAULT
@@ -427,8 +424,6 @@
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
-	printk("ppc64_interrupt_controller    = 0x%ld\n",
-	       ppc64_interrupt_controller);
 	printk("physicalMemorySize            = 0x%lx\n", lmb_phys_mem_size());
 	printk("ppc64_caches.dcache_line_size = 0x%x\n",
 	       ppc64_caches.dline_size);
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index cdf5867..fad8580 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -218,7 +218,6 @@
 {
 	struct vio_dev *viodev;
 	unsigned int *unit_address;
-	unsigned int *irq_p;
 
 	/* we need the 'device_type' property, in order to match with drivers */
 	if (of_node->type == NULL) {
@@ -243,16 +242,7 @@
 
 	viodev->dev.platform_data = of_node_get(of_node);
 
-	viodev->irq = NO_IRQ;
-	irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL);
-	if (irq_p) {
-		int virq = virt_irq_create_mapping(*irq_p);
-		if (virq == NO_IRQ) {
-			printk(KERN_ERR "Unable to allocate interrupt "
-			       "number for %s\n", of_node->full_name);
-		} else
-			viodev->irq = irq_offset_up(virq);
-	}
+	viodev->irq = irq_of_parse_and_map(of_node, 0);
 
 	snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address);
 	viodev->name = of_node->name;
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7675e67..5fe7b7f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -16,12 +16,21 @@
 	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
 	  responsiblilty.
 
+config MPC834x_ITX
+	bool "Freescale MPC834x ITX"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC 834x ITX evaluation board.
+
+	  Be aware that PCI initialization is the bootloader's
+	  responsiblilty.
+
 endchoice
 
 config MPC834x
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC834x_SYS
+	default y if MPC834x_SYS || MPC834x_ITX
 
 endmenu
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 5c72367..9387a11 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -4,3 +4,4 @@
 obj-y				:= misc.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_MPC834x_SYS)	+= mpc834x_sys.o
+obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
new file mode 100644
index 0000000..b463056
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -0,0 +1,156 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_itx.c
+ *
+ * MPC834x ITX board specific routines
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+#include <platforms/83xx/mpc834x_sys.h>
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+#ifdef CONFIG_PCI
+static int
+mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	    /*
+	     *      PCI IDSEL/INTPIN->INTLINE
+	     *       A      B      C      D
+	     */
+	{
+		{PIRQB, PIRQC, PIRQD, PIRQA},	/* idsel 0x0e */
+		{PIRQA, PIRQB, PIRQC, PIRQD},	/* idsel 0x0f */
+		{PIRQC, PIRQD, PIRQA, PIRQB},	/* idsel 0x10 */
+	};
+
+	const long min_idsel = 0x0e, max_idsel = 0x10, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+#endif				/* CONFIG_PCI */
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc834x_itx_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc834x_itx_setup_arch()", 0);
+
+	np = of_find_node_by_type(NULL, "cpu");
+	if (np != 0) {
+		unsigned int *fp =
+		    (int *)get_property(np, "clock-frequency", NULL);
+		if (fp != 0)
+			loops_per_jiffy = *fp / HZ;
+		else
+			loops_per_jiffy = 50000000 / HZ;
+		of_node_put(np);
+	}
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		add_bridge(np);
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = mpc83xx_map_irq;
+	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef  CONFIG_ROOT_NFS
+	ROOT_DEV = Root_NFS;
+#else
+	ROOT_DEV = Root_HDA1;
+#endif
+}
+
+void __init mpc834x_itx_init_IRQ(void)
+{
+	u8 senses[8] = {
+		0,			/* EXT 0 */
+		IRQ_SENSE_LEVEL,	/* EXT 1 */
+		IRQ_SENSE_LEVEL,	/* EXT 2 */
+		0,			/* EXT 3 */
+#ifdef CONFIG_PCI
+		IRQ_SENSE_LEVEL,	/* EXT 4 */
+		IRQ_SENSE_LEVEL,	/* EXT 5 */
+		IRQ_SENSE_LEVEL,	/* EXT 6 */
+		IRQ_SENSE_LEVEL,	/* EXT 7 */
+#else
+		0,			/* EXT 4 */
+		0,			/* EXT 5 */
+		0,			/* EXT 6 */
+		0,			/* EXT 7 */
+#endif
+	};
+
+	ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_itx_probe(void)
+{
+	/* We always match for now, eventually we should look at the flat
+	   dev tree to ensure this is the board we are suppose to run on
+	*/
+	return 1;
+}
+
+define_machine(mpc834x_itx) {
+	.name			= "MPC834x ITX",
+	.probe			= mpc834x_itx_probe,
+	.setup_arch		= mpc834x_itx_setup_arch,
+	.init_IRQ		= mpc834x_itx_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.h b/arch/powerpc/platforms/83xx/mpc834x_itx.h
new file mode 100644
index 0000000..174ca4e
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.h
@@ -0,0 +1,23 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_itx.h
+ *
+ * MPC834X ITX common board definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC83XX_ITX_H__
+#define __MACH_MPC83XX_ITX_H__
+
+#define PIRQA	MPC83xx_IRQ_EXT4
+#define PIRQB	MPC83xx_IRQ_EXT5
+#define PIRQC	MPC83xx_IRQ_EXT6
+#define PIRQD	MPC83xx_IRQ_EXT7
+
+#endif				/* __MACH_MPC83XX_ITX_H__ */
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 22da133..9d5da78 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -1,6 +1,9 @@
 /*
  * Cell Internal Interrupt Controller
  *
+ * Copyright (C) 2006 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *                    IBM, Corp.
+ *
  * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
  *
  * Author: Arnd Bergmann <arndb@de.ibm.com>
@@ -25,11 +28,13 @@
 #include <linux/module.h>
 #include <linux/percpu.h>
 #include <linux/types.h>
+#include <linux/ioport.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
 #include <asm/ptrace.h>
+#include <asm/machdep.h>
 
 #include "interrupt.h"
 #include "cbe_regs.h"
@@ -37,231 +42,65 @@
 struct iic {
 	struct cbe_iic_thread_regs __iomem *regs;
 	u8 target_id;
+	u8 eoi_stack[16];
+	int eoi_ptr;
+	struct irq_host *host;
 };
 
 static DEFINE_PER_CPU(struct iic, iic);
+#define IIC_NODE_COUNT	2
+static struct irq_host *iic_hosts[IIC_NODE_COUNT];
 
-void iic_local_enable(void)
+/* Convert between "pending" bits and hw irq number */
+static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
+{
+	unsigned char unit = bits.source & 0xf;
+
+	if (bits.flags & CBE_IIC_IRQ_IPI)
+		return IIC_IRQ_IPI0 | (bits.prio >> 4);
+	else if (bits.class <= 3)
+		return (bits.class << 4) | unit;
+	else
+		return IIC_IRQ_INVALID;
+}
+
+static void iic_mask(unsigned int irq)
+{
+}
+
+static void iic_unmask(unsigned int irq)
+{
+}
+
+static void iic_eoi(unsigned int irq)
 {
 	struct iic *iic = &__get_cpu_var(iic);
-	u64 tmp;
-
-	/*
-	 * There seems to be a bug that is present in DD2.x CPUs
-	 * and still only partially fixed in DD3.1.
-	 * This bug causes a value written to the priority register
-	 * not to make it there, resulting in a system hang unless we
-	 * write it again.
-	 * Masking with 0xf0 is done because the Cell BE does not
-	 * implement the lower four bits of the interrupt priority,
-	 * they always read back as zeroes, although future CPUs
-	 * might implement different bits.
-	 */
-	do {
-		out_be64(&iic->regs->prio, 0xff);
-		tmp = in_be64(&iic->regs->prio);
-	} while ((tmp & 0xf0) != 0xf0);
+	out_be64(&iic->regs->prio, iic->eoi_stack[--iic->eoi_ptr]);
+	BUG_ON(iic->eoi_ptr < 0);
 }
 
-void iic_local_disable(void)
-{
-	out_be64(&__get_cpu_var(iic).regs->prio, 0x0);
-}
-
-static unsigned int iic_startup(unsigned int irq)
-{
-	return 0;
-}
-
-static void iic_enable(unsigned int irq)
-{
-	iic_local_enable();
-}
-
-static void iic_disable(unsigned int irq)
-{
-}
-
-static void iic_end(unsigned int irq)
-{
-	iic_local_enable();
-}
-
-static struct hw_interrupt_type iic_pic = {
+static struct irq_chip iic_chip = {
 	.typename = " CELL-IIC ",
-	.startup = iic_startup,
-	.enable = iic_enable,
-	.disable = iic_disable,
-	.end = iic_end,
+	.mask = iic_mask,
+	.unmask = iic_unmask,
+	.eoi = iic_eoi,
 };
 
-static int iic_external_get_irq(struct cbe_iic_pending_bits pending)
-{
-	int irq;
-	unsigned char node, unit;
-
-	node = pending.source >> 4;
-	unit = pending.source & 0xf;
-	irq = -1;
-
-	/*
-	 * This mapping is specific to the Cell Broadband
-	 * Engine. We might need to get the numbers
-	 * from the device tree to support future CPUs.
-	 */
-	switch (unit) {
-	case 0x00:
-	case 0x0b:
-		/*
-		 * One of these units can be connected
-		 * to an external interrupt controller.
-		 */
-		if (pending.class != 2)
-			break;
-		irq = IIC_EXT_OFFSET
-			+ spider_get_irq(node)
-			+ node * IIC_NODE_STRIDE;
-		break;
-	case 0x01 ... 0x04:
-	case 0x07 ... 0x0a:
-		/*
-		 * These units are connected to the SPEs
-		 */
-		if (pending.class > 2)
-			break;
-		irq = IIC_SPE_OFFSET
-			+ pending.class * IIC_CLASS_STRIDE
-			+ node * IIC_NODE_STRIDE
-			+ unit;
-		break;
-	}
-	if (irq == -1)
-		printk(KERN_WARNING "Unexpected interrupt class %02x, "
-			"source %02x, prio %02x, cpu %02x\n", pending.class,
-			pending.source, pending.prio, smp_processor_id());
-	return irq;
-}
-
 /* Get an IRQ number from the pending state register of the IIC */
-int iic_get_irq(struct pt_regs *regs)
+static unsigned int iic_get_irq(struct pt_regs *regs)
 {
-	struct iic *iic;
-	int irq;
-	struct cbe_iic_pending_bits pending;
+  	struct cbe_iic_pending_bits pending;
+ 	struct iic *iic;
 
-	iic = &__get_cpu_var(iic);
-	*(unsigned long *) &pending = 
-		in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
-
-	irq = -1;
-	if (pending.flags & CBE_IIC_IRQ_VALID) {
-		if (pending.flags & CBE_IIC_IRQ_IPI) {
-			irq = IIC_IPI_OFFSET + (pending.prio >> 4);
-/*
-			if (irq > 0x80)
-				printk(KERN_WARNING "Unexpected IPI prio %02x"
-					"on CPU %02x\n", pending.prio,
-							smp_processor_id());
-*/
-		} else {
-			irq = iic_external_get_irq(pending);
-		}
-	}
-	return irq;
-}
-
-/* hardcoded part to be compatible with older firmware */
-
-static int setup_iic_hardcoded(void)
-{
-	struct device_node *np;
-	int nodeid, cpu;
-	unsigned long regs;
-	struct iic *iic;
-
-	for_each_possible_cpu(cpu) {
-		iic = &per_cpu(iic, cpu);
-		nodeid = cpu/2;
-
-		for (np = of_find_node_by_type(NULL, "cpu");
-		     np;
-		     np = of_find_node_by_type(np, "cpu")) {
-			if (nodeid == *(int *)get_property(np, "node-id", NULL))
-				break;
-			}
-
-		if (!np) {
-			printk(KERN_WARNING "IIC: CPU %d not found\n", cpu);
-			iic->regs = NULL;
-			iic->target_id = 0xff;
-			return -ENODEV;
-			}
-
-		regs = *(long *)get_property(np, "iic", NULL);
-
-		/* hack until we have decided on the devtree info */
-		regs += 0x400;
-		if (cpu & 1)
-			regs += 0x20;
-
-		printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs);
-		iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs));
-		iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe);
-	}
-
-	return 0;
-}
-
-static int setup_iic(void)
-{
-	struct device_node *dn;
-	unsigned long *regs;
-	char *compatible;
- 	unsigned *np, found = 0;
-	struct iic *iic = NULL;
-
-	for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
-		compatible = (char *)get_property(dn, "compatible", NULL);
-
-		if (!compatible) {
-			printk(KERN_WARNING "no compatible property found !\n");
-			continue;
-		}
-
- 		if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller"))
- 			regs = (unsigned long *)get_property(dn,"reg", NULL);
- 		else
-			continue;
-
- 		if (!regs)
- 			printk(KERN_WARNING "IIC: no reg property\n");
-
- 		np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL);
-
- 		if (!np) {
-			printk(KERN_WARNING "IIC: CPU association not found\n");
-			iic->regs = NULL;
-			iic->target_id = 0xff;
-			return -ENODEV;
-		}
-
- 		iic = &per_cpu(iic, np[0]);
- 		iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs));
-		iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe);
- 		printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs);
-
- 		iic = &per_cpu(iic, np[1]);
- 		iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs));
-		iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe);
- 		printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs);
-
-		found++;
-  	}
-
-	if (found)
-		return 0;
-	else
-		return -ENODEV;
+ 	iic = &__get_cpu_var(iic);
+ 	*(unsigned long *) &pending =
+ 		in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
+ 	iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
+ 	BUG_ON(iic->eoi_ptr > 15);
+	if (pending.flags & CBE_IIC_IRQ_VALID)
+		return irq_linear_revmap(iic->host,
+ 					 iic_pending_to_hwnum(pending));
+	return NO_IRQ;
 }
 
 #ifdef CONFIG_SMP
@@ -269,12 +108,12 @@
 /* Use the highest interrupt priorities for IPI */
 static inline int iic_ipi_to_irq(int ipi)
 {
-	return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi;
+	return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi;
 }
 
 static inline int iic_irq_to_ipi(int irq)
 {
-	return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET);
+	return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0);
 }
 
 void iic_setup_cpu(void)
@@ -293,22 +132,51 @@
 }
 EXPORT_SYMBOL_GPL(iic_get_target_id);
 
+struct irq_host *iic_get_irq_host(int node)
+{
+	if (node < 0 || node >= IIC_NODE_COUNT)
+		return NULL;
+	return iic_hosts[node];
+}
+EXPORT_SYMBOL_GPL(iic_get_irq_host);
+
+
 static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
 {
-	smp_message_recv(iic_irq_to_ipi(irq), regs);
+	int ipi = (int)(long)dev_id;
+
+	smp_message_recv(ipi, regs);
+
 	return IRQ_HANDLED;
 }
 
 static void iic_request_ipi(int ipi, const char *name)
 {
-	int irq;
+	int node, virq;
 
-	irq = iic_ipi_to_irq(ipi);
-	/* IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled */
-	get_irq_desc(irq)->chip = &iic_pic;
-	get_irq_desc(irq)->status |= IRQ_PER_CPU;
-	request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL);
+	for (node = 0; node < IIC_NODE_COUNT; node++) {
+		char *rname;
+		if (iic_hosts[node] == NULL)
+			continue;
+		virq = irq_create_mapping(iic_hosts[node],
+					  iic_ipi_to_irq(ipi), 0);
+		if (virq == NO_IRQ) {
+			printk(KERN_ERR
+			       "iic: failed to map IPI %s on node %d\n",
+			       name, node);
+			continue;
+		}
+		rname = kzalloc(strlen(name) + 16, GFP_KERNEL);
+		if (rname)
+			sprintf(rname, "%s node %d", name, node);
+		else
+			rname = (char *)name;
+		if (request_irq(virq, iic_ipi_action, IRQF_DISABLED,
+				rname, (void *)(long)ipi))
+			printk(KERN_ERR
+			       "iic: failed to request IPI %s on node %d\n",
+			       name, node);
+	}
 }
 
 void iic_request_IPIs(void)
@@ -319,34 +187,119 @@
 	iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
 #endif /* CONFIG_DEBUGGER */
 }
+
 #endif /* CONFIG_SMP */
 
-static void iic_setup_spe_handlers(void)
-{
-	int be, isrc;
 
-	/* Assume two threads per BE are present */
-	for (be=0; be < num_present_cpus() / 2; be++) {
-		for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) {
-			int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc;
-			get_irq_desc(irq)->chip = &iic_pic;
-		}
-	}
+static int iic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return h->host_data != NULL && node == h->host_data;
 }
 
-void iic_init_IRQ(void)
+static int iic_host_map(struct irq_host *h, unsigned int virq,
+			irq_hw_number_t hw, unsigned int flags)
 {
-	int cpu, irq_offset;
-	struct iic *iic;
+	if (hw < IIC_IRQ_IPI0)
+		set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
+	else
+		set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq);
+	return 0;
+}
 
-	if (setup_iic() < 0)
-		setup_iic_hardcoded();
+static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
+			   u32 *intspec, unsigned int intsize,
+			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
 
-	irq_offset = 0;
-	for_each_possible_cpu(cpu) {
-		iic = &per_cpu(iic, cpu);
-		if (iic->regs)
-			out_be64(&iic->regs->prio, 0xff);
+{
+	/* Currently, we don't translate anything. That needs to be fixed as
+	 * we get better defined device-trees. iic interrupts have to be
+	 * explicitely mapped by whoever needs them
+	 */
+	return -ENODEV;
+}
+
+static struct irq_host_ops iic_host_ops = {
+	.match = iic_host_match,
+	.map = iic_host_map,
+	.xlate = iic_host_xlate,
+};
+
+static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
+				struct irq_host *host)
+{
+	/* XXX FIXME: should locate the linux CPU number from the HW cpu
+	 * number properly. We are lucky for now
+	 */
+	struct iic *iic = &per_cpu(iic, hw_cpu);
+
+	iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs));
+	BUG_ON(iic->regs == NULL);
+
+	iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe);
+	iic->eoi_stack[0] = 0xff;
+	iic->host = host;
+	out_be64(&iic->regs->prio, 0);
+
+	printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n",
+	       hw_cpu, addr, iic->regs, iic->target_id);
+}
+
+static int __init setup_iic(void)
+{
+	struct device_node *dn;
+	struct resource r0, r1;
+	struct irq_host *host;
+	int found = 0;
+ 	u32 *np;
+
+	for (dn = NULL;
+	     (dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) {
+		if (!device_is_compatible(dn,
+				     "IBM,CBEA-Internal-Interrupt-Controller"))
+			continue;
+ 		np = (u32 *)get_property(dn, "ibm,interrupt-server-ranges",
+					 NULL);
+ 		if (np == NULL) {
+			printk(KERN_WARNING "IIC: CPU association not found\n");
+			of_node_put(dn);
+			return -ENODEV;
+		}
+		if (of_address_to_resource(dn, 0, &r0) ||
+		    of_address_to_resource(dn, 1, &r1)) {
+			printk(KERN_WARNING "IIC: Can't resolve addresses\n");
+			of_node_put(dn);
+			return -ENODEV;
+		}
+		host = NULL;
+		if (found < IIC_NODE_COUNT) {
+			host = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
+					      IIC_SOURCE_COUNT,
+					      &iic_host_ops,
+					      IIC_IRQ_INVALID);
+			iic_hosts[found] = host;
+			BUG_ON(iic_hosts[found] == NULL);
+			iic_hosts[found]->host_data = of_node_get(dn);
+			found++;
+		}
+		init_one_iic(np[0], r0.start, host);
+		init_one_iic(np[1], r1.start, host);
 	}
-	iic_setup_spe_handlers();
+
+	if (found)
+		return 0;
+	else
+		return -ENODEV;
+}
+
+void __init iic_init_IRQ(void)
+{
+	/* Discover and initialize iics */
+	if (setup_iic() < 0)
+		panic("IIC: Failed to initialize !\n");
+
+	/* Set master interrupt handling function */
+	ppc_md.get_irq = iic_get_irq;
+
+	/* Enable on current CPU */
+	iic_setup_cpu();
 }
diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h
index 799f77d..5560a92 100644
--- a/arch/powerpc/platforms/cell/interrupt.h
+++ b/arch/powerpc/platforms/cell/interrupt.h
@@ -37,27 +37,24 @@
  */
 
 enum {
-	IIC_EXT_OFFSET   = 0x00, /* Start of south bridge IRQs */
-	IIC_NUM_EXT      = 0x40, /* Number of south bridge IRQs */
-	IIC_SPE_OFFSET   = 0x40, /* Start of SPE interrupts */
-	IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class    */
-	IIC_IPI_OFFSET   = 0x70, /* Start of IPI IRQs */
-	IIC_NUM_IPIS     = 0x10, /* IRQs reserved for IPI */
-	IIC_NODE_STRIDE  = 0x80, /* Total IRQs per node   */
+	IIC_IRQ_INVALID		= 0xff,
+	IIC_IRQ_MAX		= 0x3f,
+	IIC_IRQ_EXT_IOIF0	= 0x20,
+	IIC_IRQ_EXT_IOIF1	= 0x2b,
+	IIC_IRQ_IPI0		= 0x40,
+	IIC_NUM_IPIS    	= 0x10, /* IRQs reserved for IPI */
+	IIC_SOURCE_COUNT	= 0x50,
 };
 
 extern void iic_init_IRQ(void);
-extern int  iic_get_irq(struct pt_regs *regs);
 extern void iic_cause_IPI(int cpu, int mesg);
 extern void iic_request_IPIs(void);
 extern void iic_setup_cpu(void);
-extern void iic_local_enable(void);
-extern void iic_local_disable(void);
 
 extern u8 iic_get_target_id(int cpu);
+extern struct irq_host *iic_get_irq_host(int node);
 
 extern void spider_init_IRQ(void);
-extern int spider_get_irq(int node);
 
 #endif
 #endif /* ASM_CELL_PIC_H */
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index d8c2a29b..282987d 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -49,6 +49,7 @@
 #include <asm/irq.h>
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
+#include <asm/udbg.h>
 
 #include "interrupt.h"
 #include "iommu.h"
@@ -79,10 +80,22 @@
 	printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
+static void __init cell_pcibios_fixup(void)
+{
+	struct pci_dev *dev = NULL;
+
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
+}
+
+static void __init cell_init_irq(void)
+{
+	iic_init_IRQ();
+	spider_init_IRQ();
+}
+
 static void __init cell_setup_arch(void)
 {
-	ppc_md.init_IRQ       = iic_init_IRQ;
-	ppc_md.get_irq        = iic_get_irq;
 #ifdef CONFIG_SPU_BASE
 	spu_priv1_ops         = &spu_priv1_mmio_ops;
 #endif
@@ -108,7 +121,6 @@
 	/* Find and initialize PCI host bridges */
 	init_pci_config_tokens();
 	find_and_init_phbs();
-	spider_init_IRQ();
 	cbe_pervasive_init();
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
@@ -126,8 +138,6 @@
 
 	cell_init_iommu();
 
-	ppc64_interrupt_controller = IC_CELL_PIC;
-
 	DBG(" <- cell_init_early()\n");
 }
 
@@ -173,6 +183,8 @@
 	.calibrate_decr		= generic_calibrate_decr,
 	.check_legacy_ioport	= cell_check_legacy_ioport,
 	.progress		= cell_progress,
+	.init_IRQ       	= cell_init_irq,
+	.pcibios_fixup		= cell_pcibios_fixup,
 #ifdef CONFIG_KEXEC
 	.machine_kexec		= default_machine_kexec,
 	.machine_kexec_prepare	= default_machine_kexec_prepare,
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 7c3a0b6..ae7ef88 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -22,6 +22,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/ioport.h>
 
 #include <asm/pgtable.h>
 #include <asm/prom.h>
@@ -56,184 +57,313 @@
 	REISWAITEN	= 0x508, /* Reissue Wait Control*/
 };
 
-static void __iomem *spider_pics[4];
+#define SPIDER_CHIP_COUNT	4
+#define SPIDER_SRC_COUNT	64
+#define SPIDER_IRQ_INVALID	63
 
-static void __iomem *spider_get_pic(int irq)
+struct spider_pic {
+	struct irq_host		*host;
+	struct device_node	*of_node;
+	void __iomem		*regs;
+	unsigned int		node_id;
+};
+static struct spider_pic spider_pics[SPIDER_CHIP_COUNT];
+
+static struct spider_pic *spider_virq_to_pic(unsigned int virq)
 {
-	int node = irq / IIC_NODE_STRIDE;
-	irq %= IIC_NODE_STRIDE;
-
-	if (irq >= IIC_EXT_OFFSET &&
-	    irq < IIC_EXT_OFFSET + IIC_NUM_EXT &&
-	    spider_pics)
-		return spider_pics[node];
-	return NULL;
+	return irq_map[virq].host->host_data;
 }
 
-static int spider_get_nr(unsigned int irq)
+static void __iomem *spider_get_irq_config(struct spider_pic *pic,
+					   unsigned int src)
 {
-	return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET;
+	return pic->regs + TIR_CFGA + 8 * src;
 }
 
-static void __iomem *spider_get_irq_config(int irq)
+static void spider_unmask_irq(unsigned int virq)
 {
-	void __iomem *pic;
-	pic = spider_get_pic(irq);
-	return pic + TIR_CFGA + 8 * spider_get_nr(irq);
+	struct spider_pic *pic = spider_virq_to_pic(virq);
+	void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
+
+	/* We use no locking as we should be covered by the descriptor lock
+	 * for access to invidual source configuration registers
+	 */
+	out_be32(cfg, in_be32(cfg) | 0x30000000u);
 }
 
-static void spider_enable_irq(unsigned int irq)
+static void spider_mask_irq(unsigned int virq)
 {
-	int nodeid = (irq / IIC_NODE_STRIDE) * 0x10;
-	void __iomem *cfg = spider_get_irq_config(irq);
-	irq = spider_get_nr(irq);
+	struct spider_pic *pic = spider_virq_to_pic(virq);
+	void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
 
-	out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid);
-	out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq);
-}
-
-static void spider_disable_irq(unsigned int irq)
-{
-	void __iomem *cfg = spider_get_irq_config(irq);
-	irq = spider_get_nr(irq);
-
+	/* We use no locking as we should be covered by the descriptor lock
+	 * for access to invidual source configuration registers
+	 */
 	out_be32(cfg, in_be32(cfg) & ~0x30000000u);
 }
 
-static unsigned int spider_startup_irq(unsigned int irq)
+static void spider_ack_irq(unsigned int virq)
 {
-	spider_enable_irq(irq);
+	struct spider_pic *pic = spider_virq_to_pic(virq);
+	unsigned int src = irq_map[virq].hwirq;
+
+	/* Reset edge detection logic if necessary
+	 */
+	if (get_irq_desc(virq)->status & IRQ_LEVEL)
+		return;
+
+	/* Only interrupts 47 to 50 can be set to edge */
+	if (src < 47 || src > 50)
+		return;
+
+	/* Perform the clear of the edge logic */
+	out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
+}
+
+static struct irq_chip spider_pic = {
+	.typename = " SPIDER   ",
+	.unmask = spider_unmask_irq,
+	.mask = spider_mask_irq,
+	.ack = spider_ack_irq,
+};
+
+static int spider_host_match(struct irq_host *h, struct device_node *node)
+{
+	struct spider_pic *pic = h->host_data;
+	return node == pic->of_node;
+}
+
+static int spider_host_map(struct irq_host *h, unsigned int virq,
+			irq_hw_number_t hw, unsigned int flags)
+{
+	unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+	struct spider_pic *pic = h->host_data;
+	void __iomem *cfg = spider_get_irq_config(pic, hw);
+	int level = 0;
+	u32 ic;
+
+	/* Note that only level high is supported for most interrupts */
+	if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH &&
+	    (hw < 47 || hw > 50))
+		return -EINVAL;
+
+	/* Decode sense type */
+	switch(sense) {
+	case IRQ_TYPE_EDGE_RISING:
+		ic = 0x3;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		ic = 0x2;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		ic = 0x0;
+		level = 1;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+	case IRQ_TYPE_NONE:
+		ic = 0x1;
+		level = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Configure the source. One gross hack that was there before and
+	 * that I've kept around is the priority to the BE which I set to
+	 * be the same as the interrupt source number. I don't know wether
+	 * that's supposed to make any kind of sense however, we'll have to
+	 * decide that, but for now, I'm not changing the behaviour.
+	 */
+	out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe);
+	out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
+
+	if (level)
+		get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq);
 	return 0;
 }
 
-static void spider_shutdown_irq(unsigned int irq)
+static int spider_host_xlate(struct irq_host *h, struct device_node *ct,
+			   u32 *intspec, unsigned int intsize,
+			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
 {
-	spider_disable_irq(irq);
+	/* Spider interrupts have 2 cells, first is the interrupt source,
+	 * second, well, I don't know for sure yet ... We mask the top bits
+	 * because old device-trees encode a node number in there
+	 */
+	*out_hwirq = intspec[0] & 0x3f;
+	*out_flags = IRQ_TYPE_LEVEL_HIGH;
+	return 0;
 }
 
-static void spider_end_irq(unsigned int irq)
-{
-	spider_enable_irq(irq);
-}
-
-static void spider_ack_irq(unsigned int irq)
-{
-	spider_disable_irq(irq);
-	iic_local_enable();
-}
-
-static struct hw_interrupt_type spider_pic = {
-	.typename = " SPIDER   ",
-	.startup = spider_startup_irq,
-	.shutdown = spider_shutdown_irq,
-	.enable = spider_enable_irq,
-	.disable = spider_disable_irq,
-	.ack = spider_ack_irq,
-	.end = spider_end_irq,
+static struct irq_host_ops spider_host_ops = {
+	.match = spider_host_match,
+	.map = spider_host_map,
+	.xlate = spider_host_xlate,
 };
 
-int spider_get_irq(int node)
+static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc,
+			       struct pt_regs *regs)
 {
-	unsigned long cs;
-	void __iomem *regs = spider_pics[node];
+	struct spider_pic *pic = desc->handler_data;
+	unsigned int cs, virq;
 
-	cs = in_be32(regs + TIR_CS) >> 24;
-
-	if (cs == 63)
-		return -1;
+	cs = in_be32(pic->regs + TIR_CS) >> 24;
+	if (cs == SPIDER_IRQ_INVALID)
+		virq = NO_IRQ;
 	else
-		return cs;
+		virq = irq_linear_revmap(pic->host, cs);
+	if (virq != NO_IRQ)
+		generic_handle_irq(virq, regs);
+	desc->chip->eoi(irq);
 }
 
-/* hardcoded part to be compatible with older firmware */
-
-void spider_init_IRQ_hardcoded(void)
+/* For hooking up the cascace we have a problem. Our device-tree is
+ * crap and we don't know on which BE iic interrupt we are hooked on at
+ * least not the "standard" way. We can reconstitute it based on two
+ * informations though: which BE node we are connected to and wether
+ * we are connected to IOIF0 or IOIF1. Right now, we really only care
+ * about the IBM cell blade and we know that its firmware gives us an
+ * interrupt-map property which is pretty strange.
+ */
+static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 {
-	int node;
-	long spiderpic;
-	long pics[] = { 0x24000008000, 0x34000008000 };
-	int n;
+	unsigned int virq;
+	u32 *imap, *tmp;
+	int imaplen, intsize, unit;
+	struct device_node *iic;
+	struct irq_host *iic_host;
 
-	pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__);
-
-	for (node = 0; node < num_present_cpus()/2; node++) {
-		spiderpic = pics[node];
-		printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic);
-		spider_pics[node] = ioremap(spiderpic, 0x800);
-		for (n = 0; n < IIC_NUM_EXT; n++) {
-			int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
-			get_irq_desc(irq)->chip = &spider_pic;
-		}
-
- 		/* do not mask any interrupts because of level */
- 		out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
- 		/* disable edge detection clear */
- 		/* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
- 		/* enable interrupt packets to be output */
- 		out_be32(spider_pics[node] + TIR_PIEN,
-			in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
- 		/* Enable the interrupt detection enable bit. Do this last! */
- 		out_be32(spider_pics[node] + TIR_DEN,
-			in_be32(spider_pics[node] + TIR_DEN) | 0x1);
+#if 0 /* Enable that when we have a way to retreive the node as well */
+	/* First, we check wether we have a real "interrupts" in the device
+	 * tree in case the device-tree is ever fixed
+	 */
+	struct of_irq oirq;
+	if (of_irq_map_one(pic->of_node, 0, &oirq) == 0) {
+		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+					     oirq.size);
+		goto bail;
 	}
+#endif
+
+	/* Now do the horrible hacks */
+	tmp = (u32 *)get_property(pic->of_node, "#interrupt-cells", NULL);
+	if (tmp == NULL)
+		return NO_IRQ;
+	intsize = *tmp;
+	imap = (u32 *)get_property(pic->of_node, "interrupt-map", &imaplen);
+	if (imap == NULL || imaplen < (intsize + 1))
+		return NO_IRQ;
+	iic = of_find_node_by_phandle(imap[intsize]);
+	if (iic == NULL)
+		return NO_IRQ;
+	imap += intsize + 1;
+	tmp = (u32 *)get_property(iic, "#interrupt-cells", NULL);
+	if (tmp == NULL)
+		return NO_IRQ;
+	intsize = *tmp;
+	/* Assume unit is last entry of interrupt specifier */
+	unit = imap[intsize - 1];
+	/* Ok, we have a unit, now let's try to get the node */
+	tmp = (u32 *)get_property(iic, "ibm,interrupt-server-ranges", NULL);
+	if (tmp == NULL) {
+		of_node_put(iic);
+		return NO_IRQ;
+	}
+	/* ugly as hell but works for now */
+	pic->node_id = (*tmp) >> 1;
+	of_node_put(iic);
+
+	/* Ok, now let's get cracking. You may ask me why I just didn't match
+	 * the iic host from the iic OF node, but that way I'm still compatible
+	 * with really really old old firmwares for which we don't have a node
+	 */
+	iic_host = iic_get_irq_host(pic->node_id);
+	if (iic_host == NULL)
+		return NO_IRQ;
+	/* Manufacture an IIC interrupt number of class 2 */
+	virq = irq_create_mapping(iic_host, 0x20 | unit, 0);
+	if (virq == NO_IRQ)
+		printk(KERN_ERR "spider_pic: failed to map cascade !");
+	return virq;
 }
 
-void spider_init_IRQ(void)
+
+static void __init spider_init_one(struct device_node *of_node, int chip,
+				   unsigned long addr)
 {
-	long spider_reg;
+	struct spider_pic *pic = &spider_pics[chip];
+	int i, virq;
+
+	/* Map registers */
+	pic->regs = ioremap(addr, 0x1000);
+	if (pic->regs == NULL)
+		panic("spider_pic: can't map registers !");
+
+	/* Allocate a host */
+	pic->host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, SPIDER_SRC_COUNT,
+				   &spider_host_ops, SPIDER_IRQ_INVALID);
+	if (pic->host == NULL)
+		panic("spider_pic: can't allocate irq host !");
+	pic->host->host_data = pic;
+
+	/* Fill out other bits */
+	pic->of_node = of_node_get(of_node);
+
+	/* Go through all sources and disable them */
+	for (i = 0; i < SPIDER_SRC_COUNT; i++) {
+		void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i;
+		out_be32(cfg, in_be32(cfg) & ~0x30000000u);
+	}
+
+	/* do not mask any interrupts because of level */
+	out_be32(pic->regs + TIR_MSK, 0x0);
+
+	/* enable interrupt packets to be output */
+	out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1);
+
+	/* Hook up the cascade interrupt to the iic and nodeid */
+	virq = spider_find_cascade_and_node(pic);
+	if (virq == NO_IRQ)
+		return;
+	set_irq_data(virq, pic);
+	set_irq_chained_handler(virq, spider_irq_cascade);
+
+	printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %s\n",
+	       pic->node_id, addr, of_node->full_name);
+
+	/* Enable the interrupt detection enable bit. Do this last! */
+	out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1);
+}
+
+void __init spider_init_IRQ(void)
+{
+	struct resource r;
 	struct device_node *dn;
-	char *compatible;
-	int n, node = 0;
+	int chip = 0;
 
-	for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
-		compatible = (char *)get_property(dn, "compatible", NULL);
-
-		if (!compatible)
-			continue;
-
-		if (strstr(compatible, "CBEA,platform-spider-pic"))
-			spider_reg = *(long *)get_property(dn,"reg", NULL);
-		else if (strstr(compatible, "sti,platform-spider-pic")) {
-			spider_init_IRQ_hardcoded();
-			return;
+	/* XXX node numbers are totally bogus. We _hope_ we get the device
+	 * nodes in the right order here but that's definitely not guaranteed,
+	 * we need to get the node from the device tree instead.
+	 * There is currently no proper property for it (but our whole
+	 * device-tree is bogus anyway) so all we can do is pray or maybe test
+	 * the address and deduce the node-id
+	 */
+	for (dn = NULL;
+	     (dn = of_find_node_by_name(dn, "interrupt-controller"));) {
+		if (device_is_compatible(dn, "CBEA,platform-spider-pic")) {
+			if (of_address_to_resource(dn, 0, &r)) {
+				printk(KERN_WARNING "spider-pic: Failed\n");
+				continue;
+			}
+		} else if (device_is_compatible(dn, "sti,platform-spider-pic")
+			   && (chip < 2)) {
+			static long hard_coded_pics[] =
+				{ 0x24000008000, 0x34000008000 };
+			r.start = hard_coded_pics[chip];
 		} else
 			continue;
-
-		if (!spider_reg)
-			printk("interrupt controller does not have reg property !\n");
-
-		n = prom_n_addr_cells(dn);
-
-		if ( n != 2)
-			printk("reg property with invalid number of elements \n");
-
-		spider_pics[node] = ioremap(spider_reg, 0x800);
-
-		printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n",
-		       spider_reg, n, spider_pics[node]);
-
-		for (n = 0; n < IIC_NUM_EXT; n++) {
-			int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE;
-			get_irq_desc(irq)->chip = &spider_pic;
-		}
-
-		/* do not mask any interrupts because of level */
-		out_be32(spider_pics[node] + TIR_MSK, 0x0);
-
-		/* disable edge detection clear */
-		/* out_be32(spider_pics[node] + TIR_EDC, 0x0); */
-
-		/* enable interrupt packets to be output */
-		out_be32(spider_pics[node] + TIR_PIEN,
-			in_be32(spider_pics[node] + TIR_PIEN) | 0x1);
-
-		/* Enable the interrupt detection enable bit. Do this last! */
-		out_be32(spider_pics[node] + TIR_DEN,
-			in_be32(spider_pics[node] + TIR_DEN) | 0x1);
-
-		node++;
+		spider_init_one(dn, chip++, r.start);
 	}
 }
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 656c1ef..5d2313a 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -264,51 +264,57 @@
 	return stat ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int
-spu_request_irqs(struct spu *spu)
+static int spu_request_irqs(struct spu *spu)
 {
-	int ret;
-	int irq_base;
+	int ret = 0;
 
-	irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
+	if (spu->irqs[0] != NO_IRQ) {
+		snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0",
+			 spu->number);
+		ret = request_irq(spu->irqs[0], spu_irq_class_0,
+				  IRQF_DISABLED,
+				  spu->irq_c0, spu);
+		if (ret)
+			goto bail0;
+	}
+	if (spu->irqs[1] != NO_IRQ) {
+		snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1",
+			 spu->number);
+		ret = request_irq(spu->irqs[1], spu_irq_class_1,
+				  IRQF_DISABLED,
+				  spu->irq_c1, spu);
+		if (ret)
+			goto bail1;
+	}
+	if (spu->irqs[2] != NO_IRQ) {
+		snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2",
+			 spu->number);
+		ret = request_irq(spu->irqs[2], spu_irq_class_2,
+				  IRQF_DISABLED,
+				  spu->irq_c2, spu);
+		if (ret)
+			goto bail2;
+	}
+	return 0;
 
-	snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
-	ret = request_irq(irq_base + spu->isrc,
-		 spu_irq_class_0, IRQF_DISABLED, spu->irq_c0, spu);
-	if (ret)
-		goto out;
-
-	snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
-	ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
-		 spu_irq_class_1, IRQF_DISABLED, spu->irq_c1, spu);
-	if (ret)
-		goto out1;
-
-	snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
-	ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
-		 spu_irq_class_2, IRQF_DISABLED, spu->irq_c2, spu);
-	if (ret)
-		goto out2;
-	goto out;
-
-out2:
-	free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
-out1:
-	free_irq(irq_base + spu->isrc, spu);
-out:
+bail2:
+	if (spu->irqs[1] != NO_IRQ)
+		free_irq(spu->irqs[1], spu);
+bail1:
+	if (spu->irqs[0] != NO_IRQ)
+		free_irq(spu->irqs[0], spu);
+bail0:
 	return ret;
 }
 
-static void
-spu_free_irqs(struct spu *spu)
+static void spu_free_irqs(struct spu *spu)
 {
-	int irq_base;
-
-	irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET;
-
-	free_irq(irq_base + spu->isrc, spu);
-	free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu);
-	free_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, spu);
+	if (spu->irqs[0] != NO_IRQ)
+		free_irq(spu->irqs[0], spu);
+	if (spu->irqs[1] != NO_IRQ)
+		free_irq(spu->irqs[1], spu);
+	if (spu->irqs[2] != NO_IRQ)
+		free_irq(spu->irqs[2], spu);
 }
 
 static LIST_HEAD(spu_list);
@@ -559,17 +565,38 @@
 	iounmap((u8 __iomem *)spu->local_store);
 }
 
+/* This function shall be abstracted for HV platforms */
+static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
+{
+	struct irq_host *host;
+	unsigned int isrc;
+	u32 *tmp;
+
+	host = iic_get_irq_host(spu->node);
+	if (host == NULL)
+		return -ENODEV;
+
+	/* Get the interrupt source from the device-tree */
+	tmp = (u32 *)get_property(np, "isrc", NULL);
+	if (!tmp)
+		return -ENODEV;
+	spu->isrc = isrc = tmp[0];
+
+	/* Now map interrupts of all 3 classes */
+	spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc, 0);
+	spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc, 0);
+	spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc, 0);
+
+	/* Right now, we only fail if class 2 failed */
+	return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
+}
+
 static int __init spu_map_device(struct spu *spu, struct device_node *node)
 {
 	char *prop;
 	int ret;
 
 	ret = -ENODEV;
-	prop = get_property(node, "isrc", NULL);
-	if (!prop)
-		goto out;
-	spu->isrc = *(unsigned int *)prop;
-
 	spu->name = get_property(node, "name", NULL);
 	if (!spu->name)
 		goto out;
@@ -636,7 +663,8 @@
 		return ret;
 	}
 
-	sysdev_create_file(&spu->sysdev, &attr_isrc);
+	if (spu->isrc != 0)
+		sysdev_create_file(&spu->sysdev, &attr_isrc);
 	sysfs_add_device_to_node(&spu->sysdev, spu->nid);
 
 	return 0;
@@ -668,6 +696,9 @@
 	spu->nid = of_node_to_nid(spe);
 	if (spu->nid == -1)
 		spu->nid = 0;
+	ret = spu_map_interrupts(spu, spe);
+	if (ret)
+		goto out_unmap;
 	spin_lock_init(&spu->register_lock);
 	spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1));
 	spu_mfc_sr1_set(spu, 0x33);
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 66c2534..6802cdc3 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -18,7 +18,6 @@
 #include <asm/machdep.h>
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
 #include <asm/grackle.h>
 #include <asm/rtas.h>
 
@@ -161,15 +160,9 @@
 chrp_pcibios_fixup(void)
 {
 	struct pci_dev *dev = NULL;
-	struct device_node *np;
 
-	/* PCI interrupts are controlled by the OpenPIC */
-	for_each_pci_dev(dev) {
-		np = pci_device_to_OF_node(dev);
-		if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
-			dev->irq = np->intrs[0].line;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
+	for_each_pci_dev(dev)
+		pci_read_irq_line(dev);
 }
 
 #define PRG_CL_RESET_VALID 0x00010000
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 1f1771b..bb10171 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -59,7 +59,7 @@
 int _chrp_type;
 EXPORT_SYMBOL(_chrp_type);
 
-struct mpic *chrp_mpic;
+static struct mpic *chrp_mpic;
 
 /* Used for doing CHRP event-scans */
 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
@@ -315,24 +315,32 @@
 		  jiffies + event_scan_interval);
 }
 
+static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc,
+			      struct pt_regs *regs)
+{
+	unsigned int cascade_irq = i8259_irq(regs);
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	desc->chip->eoi(irq);
+}
+
 /*
  * Finds the open-pic node and sets up the mpic driver.
  */
 static void __init chrp_find_openpic(void)
 {
 	struct device_node *np, *root;
-	int len, i, j, irq_count;
+	int len, i, j;
 	int isu_size, idu_size;
 	unsigned int *iranges, *opprop = NULL;
 	int oplen = 0;
 	unsigned long opaddr;
 	int na = 1;
-	unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
 
-	np = find_type_devices("open-pic");
+	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL)
 		return;
-	root = find_path_device("/");
+	root = of_find_node_by_path("/");
 	if (root) {
 		opprop = (unsigned int *) get_property
 			(root, "platform-open-pic", &oplen);
@@ -343,19 +351,15 @@
 		oplen /= na * sizeof(unsigned int);
 	} else {
 		struct resource r;
-		if (of_address_to_resource(np, 0, &r))
-			return;
+		if (of_address_to_resource(np, 0, &r)) {
+			goto bail;
+		}
 		opaddr = r.start;
 		oplen = 0;
 	}
 
 	printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
 
-	irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
-	prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4);
-	/* i8259 cascade is always positive level */
-	init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE;
-
 	iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
 	if (iranges == NULL)
 		len = 0;	/* non-distributed mpic */
@@ -382,15 +386,12 @@
 	if (len > 1)
 		isu_size = iranges[3];
 
-	chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
-			       isu_size, NUM_ISA_INTERRUPTS, irq_count,
-			       NR_IRQS - 4, init_senses, irq_count,
-			       " MPIC    ");
+	chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
+			       isu_size, 0, " MPIC    ");
 	if (chrp_mpic == NULL) {
 		printk(KERN_ERR "Failed to allocate MPIC structure\n");
-		return;
+		goto bail;
 	}
-
 	j = na - 1;
 	for (i = 1; i < len; ++i) {
 		iranges += 2;
@@ -402,7 +403,10 @@
 	}
 
 	mpic_init(chrp_mpic);
-	mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+	ppc_md.get_irq = mpic_get_irq;
+ bail:
+	of_node_put(root);
+	of_node_put(np);
 }
 
 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
@@ -413,14 +417,34 @@
 };
 #endif
 
-void __init chrp_init_IRQ(void)
+static void __init chrp_find_8259(void)
 {
-	struct device_node *np;
+	struct device_node *np, *pic = NULL;
 	unsigned long chrp_int_ack = 0;
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
-	struct device_node *kbd;
-#endif
+	unsigned int cascade_irq;
 
+	/* Look for cascade */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (device_is_compatible(np, "chrp,iic")) {
+			pic = np;
+			break;
+		}
+	/* Ok, 8259 wasn't found. We need to handle the case where
+	 * we have a pegasos that claims to be chrp but doesn't have
+	 * a proper interrupt tree
+	 */
+	if (pic == NULL && chrp_mpic != NULL) {
+		printk(KERN_ERR "i8259: Not found in device-tree"
+		       " assuming no legacy interrupts\n");
+		return;
+	}
+
+	/* Look for intack. In a perfect world, we would look for it on
+	 * the ISA bus that holds the 8259 but heh... Works that way. If
+	 * we ever see a problem, we can try to re-use the pSeries code here.
+	 * Also, Pegasos-type platforms don't have a proper node to start
+	 * from anyway
+	 */
 	for (np = find_devices("pci"); np != NULL; np = np->next) {
 		unsigned int *addrp = (unsigned int *)
 			get_property(np, "8259-interrupt-acknowledge", NULL);
@@ -431,11 +455,29 @@
 		break;
 	}
 	if (np == NULL)
-		printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+		printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
+		       " address, polling\n");
 
+	i8259_init(pic, chrp_int_ack);
+	if (ppc_md.get_irq == NULL)
+		ppc_md.get_irq = i8259_irq;
+	if (chrp_mpic != NULL) {
+		cascade_irq = irq_of_parse_and_map(pic, 0);
+		if (cascade_irq == NO_IRQ)
+			printk(KERN_ERR "i8259: failed to map cascade irq\n");
+		else
+			set_irq_chained_handler(cascade_irq,
+						chrp_8259_cascade);
+	}
+}
+
+void __init chrp_init_IRQ(void)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+	struct device_node *kbd;
+#endif
 	chrp_find_openpic();
-
-	i8259_init(chrp_int_ack, 0);
+	chrp_find_8259();
 
 	if (_chrp_type == _CHRP_Pegasos)
 		ppc_md.get_irq        = i8259_irq;
@@ -520,10 +562,6 @@
 	DMA_MODE_READ = 0x44;
 	DMA_MODE_WRITE = 0x48;
 	isa_io_base = CHRP_ISA_IO_BASE;		/* default value */
-	ppc_do_canonicalize_irqs = 1;
-
-	/* Assume we have an 8259... */
-	__irq_offset_value = NUM_ISA_INTERRUPTS;
 
 	return 1;
 }
@@ -535,7 +573,6 @@
 	.init			= chrp_init2,
 	.show_cpuinfo		= chrp_show_cpuinfo,
 	.init_IRQ		= chrp_init_IRQ,
-	.get_irq		= mpic_get_irq,
 	.pcibios_fixup		= chrp_pcibios_fixup,
 	.restart		= rtas_restart,
 	.power_off		= rtas_power_off,
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index c298ca1..1d2307e 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -29,7 +29,6 @@
 #include <asm/smp.h>
 #include <asm/residual.h>
 #include <asm/time.h>
-#include <asm/open_pic.h>
 #include <asm/machdep.h>
 #include <asm/smp.h>
 #include <asm/mpic.h>
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index f70e820..2275e64 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -162,27 +162,6 @@
 		printk(KERN_ERR "pci_event_handler: NULL event received\n");
 }
 
-/*
- * This is called by init_IRQ.  set in ppc_md.init_IRQ by iSeries_setup.c
- * It must be called before the bus walk.
- */
-void __init iSeries_init_IRQ(void)
-{
-	/* Register PCI event handler and open an event path */
-	int ret;
-
-	ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
-			&pci_event_handler);
-	if (ret == 0) {
-		ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
-		if (ret != 0)
-			printk(KERN_ERR "iseries_init_IRQ: open event path "
-					"failed with rc 0x%x\n", ret);
-	} else
-		printk(KERN_ERR "iseries_init_IRQ: register handler "
-				"failed with rc 0x%x\n", ret);
-}
-
 #define REAL_IRQ_TO_SUBBUS(irq)	(((irq) >> 14) & 0xff)
 #define REAL_IRQ_TO_BUS(irq)	((((irq) >> 6) & 0xff) + 1)
 #define REAL_IRQ_TO_IDSEL(irq)	((((irq) >> 3) & 7) + 1)
@@ -196,7 +175,7 @@
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = virt_irq_to_real_map[irq];
+	unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
 	/* The IRQ has already been locked by the caller */
 	bus = REAL_IRQ_TO_BUS(rirq);
@@ -213,7 +192,7 @@
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = virt_irq_to_real_map[irq];
+	unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
 	bus = REAL_IRQ_TO_BUS(rirq);
 	function = REAL_IRQ_TO_FUNC(rirq);
@@ -254,7 +233,7 @@
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = virt_irq_to_real_map[irq];
+	unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
 	/* irq should be locked by the caller */
 	bus = REAL_IRQ_TO_BUS(rirq);
@@ -277,7 +256,7 @@
 {
 	u32 bus, dev_id, function, mask;
 	const u32 sub_bus = 0;
-	unsigned int rirq = virt_irq_to_real_map[irq];
+	unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
 	/* The IRQ has already been locked by the caller */
 	bus = REAL_IRQ_TO_BUS(rirq);
@@ -291,19 +270,19 @@
 
 static void iseries_end_IRQ(unsigned int irq)
 {
-	unsigned int rirq = virt_irq_to_real_map[irq];
+	unsigned int rirq = (unsigned int)irq_map[irq].hwirq;
 
 	HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq),
 		(REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq));
 }
 
-static hw_irq_controller iSeries_IRQ_handler = {
-	.typename = "iSeries irq controller",
-	.startup = iseries_startup_IRQ,
-	.shutdown = iseries_shutdown_IRQ,
-	.enable = iseries_enable_IRQ,
-	.disable = iseries_disable_IRQ,
-	.end = iseries_end_IRQ
+static struct irq_chip iseries_pic = {
+	.typename	= "iSeries irq controller",
+	.startup	= iseries_startup_IRQ,
+	.shutdown	= iseries_shutdown_IRQ,
+	.unmask		= iseries_enable_IRQ,
+	.mask		= iseries_disable_IRQ,
+	.eoi		= iseries_end_IRQ
 };
 
 /*
@@ -314,17 +293,14 @@
 int __init iSeries_allocate_IRQ(HvBusNumber bus,
 		HvSubBusNumber sub_bus, u32 bsubbus)
 {
-	int virtirq;
 	unsigned int realirq;
 	u8 idsel = ISERIES_GET_DEVICE_FROM_SUBBUS(bsubbus);
 	u8 function = ISERIES_GET_FUNCTION_FROM_SUBBUS(bsubbus);
 
 	realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3)
 		+ function;
-	virtirq = virt_irq_create_mapping(realirq);
 
-	irq_desc[virtirq].chip = &iSeries_IRQ_handler;
-	return virtirq;
+	return irq_create_mapping(NULL, realirq, IRQ_TYPE_NONE);
 }
 
 #endif /* CONFIG_PCI */
@@ -332,10 +308,9 @@
 /*
  * Get the next pending IRQ.
  */
-int iSeries_get_irq(struct pt_regs *regs)
+unsigned int iSeries_get_irq(struct pt_regs *regs)
 {
-	/* -2 means ignore this interrupt */
-	int irq = -2;
+	int irq = NO_IRQ_IGNORE;
 
 #ifdef CONFIG_SMP
 	if (get_lppaca()->int_dword.fields.ipi_cnt) {
@@ -358,9 +333,57 @@
 		}
 		spin_unlock(&pending_irqs_lock);
 		if (irq >= NR_IRQS)
-			irq = -2;
+			irq = NO_IRQ_IGNORE;
 	}
 #endif
 
 	return irq;
 }
+
+static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
+				irq_hw_number_t hw, unsigned int flags)
+{
+	set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq);
+
+	return 0;
+}
+
+static struct irq_host_ops iseries_irq_host_ops = {
+	.map = iseries_irq_host_map,
+};
+
+/*
+ * This is called by init_IRQ.  set in ppc_md.init_IRQ by iSeries_setup.c
+ * It must be called before the bus walk.
+ */
+void __init iSeries_init_IRQ(void)
+{
+	/* Register PCI event handler and open an event path */
+	struct irq_host *host;
+	int ret;
+
+	/*
+	 * The Hypervisor only allows us up to 256 interrupt
+	 * sources (the irq number is passed in a u8).
+	 */
+	irq_set_virq_count(256);
+
+	/* Create irq host. No need for a revmap since HV will give us
+	 * back our virtual irq number
+	 */
+	host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &iseries_irq_host_ops, 0);
+	BUG_ON(host == NULL);
+	irq_set_default_host(host);
+
+	ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+			&pci_event_handler);
+	if (ret == 0) {
+		ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+		if (ret != 0)
+			printk(KERN_ERR "iseries_init_IRQ: open event path "
+					"failed with rc 0x%x\n", ret);
+	} else
+		printk(KERN_ERR "iseries_init_IRQ: register handler "
+				"failed with rc 0x%x\n", ret);
+}
+
diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h
index 188aa80..1ee8985 100644
--- a/arch/powerpc/platforms/iseries/irq.h
+++ b/arch/powerpc/platforms/iseries/irq.h
@@ -4,6 +4,6 @@
 extern void iSeries_init_IRQ(void);
 extern int  iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32);
 extern void iSeries_activate_IRQs(void);
-extern int iSeries_get_irq(struct pt_regs *);
+extern unsigned int iSeries_get_irq(struct pt_regs *);
 
 #endif /* _ISERIES_IRQ_H */
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index c877074..c9605d7 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -294,8 +294,6 @@
 {
 	DBG(" -> iSeries_init_early()\n");
 
-	ppc64_interrupt_controller = IC_ISERIES;
-
 #if defined(CONFIG_BLK_DEV_INITRD)
 	/*
 	 * If the init RAM disk has been configured and there is
@@ -659,12 +657,6 @@
 	powerpc_firmware_features |= FW_FEATURE_ISERIES;
 	powerpc_firmware_features |= FW_FEATURE_LPAR;
 
-	/*
-	 * The Hypervisor only allows us up to 256 interrupt
-	 * sources (the irq number is passed in a u8).
-	 */
-	virt_irq_max = 255;
-
 	hpte_init_iSeries();
 
 	return 1;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index f7170ff..63a1670 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -443,18 +443,23 @@
 int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 {
 	struct device_node *np;
-	int irq = channel ? 15 : 14;
+	unsigned int defirq = channel ? 15 : 14;
+	unsigned int irq;
 
 	if (pdev->vendor != PCI_VENDOR_ID_AMD ||
 	    pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
-		return irq;
+		return defirq;
 
 	np = pci_device_to_OF_node(pdev);
 	if (np == NULL)
-		return irq;
-	if (np->n_intrs < 2)
-		return irq;
-	return np->intrs[channel & 0x1].line;
+		return defirq;
+	irq = irq_of_parse_and_map(np, channel & 0x1);
+	if (irq == NO_IRQ) {
+		printk("Failed to map onboard IDE interrupt for channel %d\n",
+		       channel);
+		return defirq;
+	}
+	return irq;
 }
 
 /* XXX: To remove once all firmwares are ok */
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 5cf90c28..cb528c9 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -11,7 +11,7 @@
  *
  */
 
-#define DEBUG
+#undef DEBUG
 
 #include <linux/init.h>
 #include <linux/errno.h>
@@ -198,50 +198,81 @@
 {
 	DBG(" -> maple_init_early\n");
 
-	/* Setup interrupt mapping options */
-	ppc64_interrupt_controller = IC_OPEN_PIC;
-
 	iommu_init_early_dart();
 
 	DBG(" <- maple_init_early\n");
 }
 
-
-static __init void maple_init_IRQ(void)
+/*
+ * This is almost identical to pSeries and CHRP. We need to make that
+ * code generic at one point, with appropriate bits in the device-tree to
+ * identify the presence of an HT APIC
+ */
+static void __init maple_init_IRQ(void)
 {
-	struct device_node *root;
+	struct device_node *root, *np, *mpic_node = NULL;
 	unsigned int *opprop;
-	unsigned long opic_addr;
+	unsigned long openpic_addr = 0;
+	int naddr, n, i, opplen, has_isus = 0;
 	struct mpic *mpic;
-	unsigned char senses[128];
-	int n;
+	unsigned int flags = MPIC_PRIMARY;
 
-	DBG(" -> maple_init_IRQ\n");
+	/* Locate MPIC in the device-tree. Note that there is a bug
+	 * in Maple device-tree where the type of the controller is
+	 * open-pic and not interrupt-controller
+	 */
+	for_each_node_by_type(np, "open-pic") {
+		mpic_node = np;
+		break;
+	}
+	if (mpic_node == NULL) {
+		printk(KERN_ERR
+		       "Failed to locate the MPIC interrupt controller\n");
+		return;
+	}
 
-	/* XXX: Non standard, replace that with a proper openpic/mpic node
-	 * in the device-tree. Find the Open PIC if present */
+	/* Find address list in /platform-open-pic */
 	root = of_find_node_by_path("/");
-	opprop = (unsigned int *) get_property(root,
-				"platform-open-pic", NULL);
-	if (opprop == 0)
-		panic("OpenPIC not found !\n");
-
-	n = prom_n_addr_cells(root);
-	for (opic_addr = 0; n > 0; --n)
-		opic_addr = (opic_addr << 32) + *opprop++;
+	naddr = prom_n_addr_cells(root);
+	opprop = (unsigned int *) get_property(root, "platform-open-pic",
+					       &opplen);
+	if (opprop != 0) {
+		openpic_addr = of_read_number(opprop, naddr);
+		has_isus = (opplen > naddr);
+		printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
+		       openpic_addr, has_isus);
+	}
 	of_node_put(root);
 
-	/* Obtain sense values from device-tree */
-	prom_get_irq_senses(senses, 0, 128);
+	BUG_ON(openpic_addr == 0);
 
-	mpic = mpic_alloc(opic_addr,
-			  MPIC_PRIMARY | MPIC_BIG_ENDIAN |
-			  MPIC_BROKEN_U3 | MPIC_WANTS_RESET,
-			  0, 0, 128, 128, senses, 128, "U3-MPIC");
+	/* Check for a big endian MPIC */
+	if (get_property(np, "big-endian", NULL) != NULL)
+		flags |= MPIC_BIG_ENDIAN;
+
+	/* XXX Maple specific bits */
+	flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
+
+	/* Setup the openpic driver. More device-tree junks, we hard code no
+	 * ISUs for now. I'll have to revisit some stuffs with the folks doing
+	 * the firmware for those
+	 */
+	mpic = mpic_alloc(mpic_node, openpic_addr, flags,
+			  /*has_isus ? 16 :*/ 0, 0, " MPIC     ");
 	BUG_ON(mpic == NULL);
-	mpic_init(mpic);
 
-	DBG(" <- maple_init_IRQ\n");
+	/* Add ISUs */
+	opplen /= sizeof(u32);
+	for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+		unsigned long isuaddr = of_read_number(opprop + i, naddr);
+		mpic_assign_isu(mpic, n, isuaddr);
+	}
+
+	/* All ISUs are setup, complete initialization */
+	mpic_init(mpic);
+	ppc_md.get_irq = mpic_get_irq;
+	of_node_put(mpic_node);
+	of_node_put(root);
 }
 
 static void __init maple_progress(char *s, unsigned short hex)
@@ -256,7 +287,9 @@
 static int __init maple_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
-	if (!of_flat_dt_is_compatible(root, "Momentum,Maple"))
+
+	if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
+	    !of_flat_dt_is_compatible(root, "Momentum,Apache"))
 		return 0;
 	/*
 	 * On U3, the DART (iommu) must be allocated now since it
@@ -277,7 +310,6 @@
 	.setup_arch		= maple_setup_arch,
 	.init_early		= maple_init_early,
 	.init_IRQ		= maple_init_IRQ,
-	.get_irq		= mpic_get_irq,
 	.pcibios_fixup		= maple_pcibios_fixup,
 	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,
 	.restart		= maple_restart,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index cb257ae..e63d52f 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -162,6 +162,8 @@
 {
 	u32 val;
 
+	bootx_dt_add_prop("linux,bootx", NULL, 0, mem_end);
+
 	if (bootx_info->kernelParamsOffset) {
 		char *args = (char *)((unsigned long)bootx_info) +
 			bootx_info->kernelParamsOffset;
@@ -181,8 +183,25 @@
 static void __init bootx_add_display_props(unsigned long base,
 					   unsigned long *mem_end)
 {
+	boot_infos_t *bi = bootx_info;
+	u32 tmp;
+
 	bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end);
 	bootx_dt_add_prop("linux,opened", NULL, 0, mem_end);
+	tmp = bi->dispDeviceDepth;
+	bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end);
+	tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0];
+	bootx_dt_add_prop("linux,bootx-width", &tmp, 4, mem_end);
+	tmp = bi->dispDeviceRect[3] - bi->dispDeviceRect[1];
+	bootx_dt_add_prop("linux,bootx-height", &tmp, 4, mem_end);
+	tmp = bi->dispDeviceRowBytes;
+	bootx_dt_add_prop("linux,bootx-linebytes", &tmp, 4, mem_end);
+	tmp = (u32)bi->dispDeviceBase;
+	if (tmp == 0)
+		tmp = (u32)bi->logicalDisplayBase;
+	tmp += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes;
+	tmp += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8);
+	bootx_dt_add_prop("linux,bootx-addr", &tmp, 4, mem_end);
 }
 
 static void __init bootx_dt_add_string(char *s, unsigned long *mem_end)
@@ -211,7 +230,7 @@
 
 	if (!strcmp(namep, "/chosen")) {
 		DBG(" detected /chosen ! adding properties names !\n");
-		bootx_dt_add_string("linux,platform", mem_end);
+		bootx_dt_add_string("linux,bootx", mem_end);
 		bootx_dt_add_string("linux,stdout-path", mem_end);
 		bootx_dt_add_string("linux,initrd-start", mem_end);
 		bootx_dt_add_string("linux,initrd-end", mem_end);
@@ -222,6 +241,11 @@
 		DBG(" detected display ! adding properties names !\n");
 		bootx_dt_add_string("linux,boot-display", mem_end);
 		bootx_dt_add_string("linux,opened", mem_end);
+		bootx_dt_add_string("linux,bootx-depth", mem_end);
+		bootx_dt_add_string("linux,bootx-width", mem_end);
+		bootx_dt_add_string("linux,bootx-height", mem_end);
+		bootx_dt_add_string("linux,bootx-linebytes", mem_end);
+		bootx_dt_add_string("linux,bootx-addr", mem_end);
 		strncpy(bootx_disp_path, namep, 255);
 	}
 
@@ -443,7 +467,14 @@
 	if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
 		bi->logicalDisplayBase = bi->dispDeviceBase;
 
+	/* Fixup depth 16 -> 15 as that's what MacOS calls 16bpp */
+	if (bi->dispDeviceDepth == 16)
+		bi->dispDeviceDepth = 15;
+
 #ifdef CONFIG_BOOTX_TEXT
+	ptr = (unsigned long)bi->logicalDisplayBase;
+	ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes;
+	ptr += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8);
 	btext_setup_display(bi->dispDeviceRect[2] - bi->dispDeviceRect[0],
 			    bi->dispDeviceRect[3] - bi->dispDeviceRect[1],
 			    bi->dispDeviceDepth, bi->dispDeviceRowBytes,
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index ceafaf5..8677f50 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -522,10 +522,11 @@
 		host->speed = KW_I2C_MODE_25KHZ;
 		break;
 	}	
-	if (np->n_intrs > 0)
-		host->irq = np->intrs[0].line;
-	else
-		host->irq = NO_IRQ;
+	host->irq = irq_of_parse_and_map(np, 0);
+	if (host->irq == NO_IRQ)
+		printk(KERN_WARNING
+		       "low_i2c: Failed to map interrupt for %s\n",
+		       np->full_name);
 
 	host->base = ioremap((*addrp), 0x1000);
 	if (host->base == NULL) {
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 41fa240..6a36ea9 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -29,6 +29,8 @@
 #include <asm/machdep.h>
 #include <asm/nvram.h>
 
+#include "pmac.h"
+
 #define DEBUG
 
 #ifdef DEBUG
@@ -80,9 +82,6 @@
 // XXX Turn that into a sem
 static DEFINE_SPINLOCK(nv_lock);
 
-extern int pmac_newworld;
-extern int system_running;
-
 static int (*core99_write_bank)(int bank, u8* datas);
 static int (*core99_erase_bank)(int bank);
 
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index d524a91..556b349 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -46,6 +46,9 @@
 static struct pci_controller *u3_agp;
 static struct pci_controller *u4_pcie;
 static struct pci_controller *u3_ht;
+#define has_second_ohare 0
+#else
+static int has_second_ohare;
 #endif /* CONFIG_PPC64 */
 
 extern u8 pci_cache_line_size;
@@ -647,6 +650,33 @@
 	early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
 }
 
+static void __init init_second_ohare(void)
+{
+	struct device_node *np = of_find_node_by_name(NULL, "pci106b,7");
+	unsigned char bus, devfn;
+	unsigned short cmd;
+
+	if (np == NULL)
+		return;
+
+	/* This must run before we initialize the PICs since the second
+	 * ohare hosts a PIC that will be accessed there.
+	 */
+	if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+		struct pci_controller* hose =
+			pci_find_hose_for_OF_device(np);
+		if (!hose) {
+			printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+			return;
+		}
+		early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+		cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+		cmd &= ~PCI_COMMAND_IO;
+		early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+	}
+	has_second_ohare = 1;
+}
+
 /*
  * Some Apple desktop machines have a NEC PD720100A USB2 controller
  * on the motherboard. Open Firmware, on these, will disable the
@@ -688,9 +718,6 @@
 			       " EHCI, fixing up...\n");
 			data &= ~1UL;
 			early_write_config_dword(hose, bus, devfn, 0xe4, data);
-			early_write_config_byte(hose, bus,
-						devfn | 2, PCI_INTERRUPT_LINE,
-				nec->intrs[0].line);
 		}
 	}
 }
@@ -958,30 +985,26 @@
 	return 0;
 }
 
-static void __init pcibios_fixup_OF_interrupts(void)
+void __init pmac_pcibios_fixup(void)
 {
 	struct pci_dev* dev = NULL;
 
-	/*
-	 * Open Firmware often doesn't initialize the
-	 * PCI_INTERRUPT_LINE config register properly, so we
-	 * should find the device node and apply the interrupt
-	 * obtained from the OF device-tree
-	 */
 	for_each_pci_dev(dev) {
-		struct device_node *node;
-		node = pci_device_to_OF_node(dev);
-		/* this is the node, see if it has interrupts */
-		if (node && node->n_intrs > 0)
-			dev->irq = node->intrs[0].line;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-}
+		/* Read interrupt from the device-tree */
+		pci_read_irq_line(dev);
 
-void __init pmac_pcibios_fixup(void)
-{
-	/* Fixup interrupts according to OF tree */
-	pcibios_fixup_OF_interrupts();
+		/* Fixup interrupt for the modem/ethernet combo controller.
+		 * on machines with a second ohare chip.
+		 * The number in the device tree (27) is bogus (correct for
+		 * the ethernet-only board but not the combo ethernet/modem
+		 * board). The real interrupt is 28 on the second controller
+		 * -> 28+32 = 60.
+		 */
+		if (has_second_ohare &&
+		    dev->vendor == PCI_VENDOR_ID_DEC &&
+		    dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS)
+			dev->irq = irq_create_mapping(NULL, 60, 0);
+	}
 }
 
 #ifdef CONFIG_PPC64
@@ -1071,6 +1094,7 @@
 
 #else /* CONFIG_PPC64 */
 	init_p2pbridge();
+	init_second_ohare();
 	fixup_nec_usb2();
 
 	/* We are still having some issues with the Xserve G4, enabling
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index d6eab8b..6d66359 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -24,19 +24,18 @@
 
 static int macio_do_gpio_irq_enable(struct pmf_function *func)
 {
-	if (func->node->n_intrs < 1)
+	unsigned int irq = irq_of_parse_and_map(func->node, 0);
+	if (irq == NO_IRQ)
 		return -EINVAL;
-
-	return request_irq(func->node->intrs[0].line, macio_gpio_irq, 0,
-			   func->node->name, func);
+	return request_irq(irq, macio_gpio_irq, 0, func->node->name, func);
 }
 
 static int macio_do_gpio_irq_disable(struct pmf_function *func)
 {
-	if (func->node->n_intrs < 1)
+	unsigned int irq = irq_of_parse_and_map(func->node, 0);
+	if (irq == NO_IRQ)
 		return -EINVAL;
-
-	free_irq(func->node->intrs[0].line, func);
+	free_irq(irq, func);
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index c9b09a9..3d328bc 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -65,39 +65,36 @@
 
 static DEFINE_SPINLOCK(pmac_pic_lock);
 
-#define GATWICK_IRQ_POOL_SIZE        10
-static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
-
 #define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static int pmac_irq_cascade = -1;
+static struct irq_host *pmac_pic_host;
 
-/*
- * Mark an irq as "lost".  This is only used on the pmac
- * since it can lose interrupts (see pmac_set_irq_mask).
- * -- Cort
- */
-void __set_lost(unsigned long irq_nr, int nokick)
+static void __pmac_retrigger(unsigned int irq_nr)
 {
-	if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+	if (irq_nr >= max_real_irqs && pmac_irq_cascade > 0) {
+		__set_bit(irq_nr, ppc_lost_interrupts);
+		irq_nr = pmac_irq_cascade;
+		mb();
+	}
+	if (!__test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
 		atomic_inc(&ppc_n_lost_interrupts);
-		if (!nokick)
-			set_dec(1);
+		set_dec(1);
 	}
 }
 
-static void pmac_mask_and_ack_irq(unsigned int irq_nr)
+static void pmac_mask_and_ack_irq(unsigned int virq)
 {
-        unsigned long bit = 1UL << (irq_nr & 0x1f);
-        int i = irq_nr >> 5;
+	unsigned int src = irq_map[virq].hwirq;
+        unsigned long bit = 1UL << (virq & 0x1f);
+        int i = virq >> 5;
         unsigned long flags;
 
-        if ((unsigned)irq_nr >= max_irqs)
-                return;
-
-        clear_bit(irq_nr, ppc_cached_irq_mask);
-        if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
-                atomic_dec(&ppc_n_lost_interrupts);
 	spin_lock_irqsave(&pmac_pic_lock, flags);
+        __clear_bit(src, ppc_cached_irq_mask);
+        if (__test_and_clear_bit(src, ppc_lost_interrupts))
+                atomic_dec(&ppc_n_lost_interrupts);
         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
         out_le32(&pmac_irq_hw[i]->ack, bit);
         do {
@@ -109,16 +106,29 @@
 	spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
-static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+static void pmac_ack_irq(unsigned int virq)
+{
+	unsigned int src = irq_map[virq].hwirq;
+        unsigned long bit = 1UL << (src & 0x1f);
+        int i = src >> 5;
+        unsigned long flags;
+
+  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	if (__test_and_clear_bit(src, ppc_lost_interrupts))
+                atomic_dec(&ppc_n_lost_interrupts);
+        out_le32(&pmac_irq_hw[i]->ack, bit);
+        (void)in_le32(&pmac_irq_hw[i]->ack);
+	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
 {
         unsigned long bit = 1UL << (irq_nr & 0x1f);
         int i = irq_nr >> 5;
-        unsigned long flags;
 
         if ((unsigned)irq_nr >= max_irqs)
                 return;
 
-	spin_lock_irqsave(&pmac_pic_lock, flags);
         /* enable unmasked interrupts */
         out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
 
@@ -135,71 +145,78 @@
          * the bit in the flag register or request another interrupt.
          */
         if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
-		__set_lost((ulong)irq_nr, nokicklost);
-	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+		__pmac_retrigger(irq_nr);
 }
 
 /* When an irq gets requested for the first client, if it's an
  * edge interrupt, we clear any previous one on the controller
  */
-static unsigned int pmac_startup_irq(unsigned int irq_nr)
+static unsigned int pmac_startup_irq(unsigned int virq)
 {
-        unsigned long bit = 1UL << (irq_nr & 0x1f);
-        int i = irq_nr >> 5;
+	unsigned long flags;
+	unsigned int src = irq_map[virq].hwirq;
+        unsigned long bit = 1UL << (src & 0x1f);
+        int i = src >> 5;
 
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	if ((irq_desc[virq].status & IRQ_LEVEL) == 0)
 		out_le32(&pmac_irq_hw[i]->ack, bit);
-        set_bit(irq_nr, ppc_cached_irq_mask);
-        pmac_set_irq_mask(irq_nr, 0);
+        __set_bit(src, ppc_cached_irq_mask);
+        __pmac_set_irq_mask(src, 0);
+  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
 
 	return 0;
 }
 
-static void pmac_mask_irq(unsigned int irq_nr)
+static void pmac_mask_irq(unsigned int virq)
 {
-        clear_bit(irq_nr, ppc_cached_irq_mask);
-        pmac_set_irq_mask(irq_nr, 0);
-        mb();
+	unsigned long flags;
+	unsigned int src = irq_map[virq].hwirq;
+
+  	spin_lock_irqsave(&pmac_pic_lock, flags);
+        __clear_bit(src, ppc_cached_irq_mask);
+        __pmac_set_irq_mask(src, 0);
+  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
-static void pmac_unmask_irq(unsigned int irq_nr)
+static void pmac_unmask_irq(unsigned int virq)
 {
-        set_bit(irq_nr, ppc_cached_irq_mask);
-        pmac_set_irq_mask(irq_nr, 0);
+	unsigned long flags;
+	unsigned int src = irq_map[virq].hwirq;
+
+	spin_lock_irqsave(&pmac_pic_lock, flags);
+	__set_bit(src, ppc_cached_irq_mask);
+        __pmac_set_irq_mask(src, 0);
+  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
-static void pmac_end_irq(unsigned int irq_nr)
+static int pmac_retrigger(unsigned int virq)
 {
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq_nr].action) {
-        	set_bit(irq_nr, ppc_cached_irq_mask);
-	        pmac_set_irq_mask(irq_nr, 1);
-	}
+	unsigned long flags;
+
+  	spin_lock_irqsave(&pmac_pic_lock, flags);
+	__pmac_retrigger(irq_map[virq].hwirq);
+  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	return 1;
 }
 
-
-struct hw_interrupt_type pmac_pic = {
+static struct irq_chip pmac_pic = {
 	.typename	= " PMAC-PIC ",
 	.startup	= pmac_startup_irq,
-	.enable		= pmac_unmask_irq,
-	.disable	= pmac_mask_irq,
-	.ack		= pmac_mask_and_ack_irq,
-	.end		= pmac_end_irq,
-};
-
-struct hw_interrupt_type gatwick_pic = {
-	.typename	= " GATWICK  ",
-	.startup	= pmac_startup_irq,
-	.enable		= pmac_unmask_irq,
-	.disable	= pmac_mask_irq,
-	.ack		= pmac_mask_and_ack_irq,
-	.end		= pmac_end_irq,
+	.mask		= pmac_mask_irq,
+	.ack		= pmac_ack_irq,
+	.mask_ack	= pmac_mask_and_ack_irq,
+	.unmask		= pmac_unmask_irq,
+	.retrigger	= pmac_retrigger,
 };
 
 static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
 {
+	unsigned long flags;
 	int irq, bits;
+	int rc = IRQ_NONE;
 
+  	spin_lock_irqsave(&pmac_pic_lock, flags);
 	for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -209,17 +226,20 @@
 		if (bits == 0)
 			continue;
 		irq += __ilog2(bits);
+		spin_unlock_irqrestore(&pmac_pic_lock, flags);
 		__do_IRQ(irq, regs);
-		return IRQ_HANDLED;
+		spin_lock_irqsave(&pmac_pic_lock, flags);
+		rc = IRQ_HANDLED;
 	}
-	printk("gatwick irq not from gatwick pic\n");
-	return IRQ_NONE;
+  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	return rc;
 }
 
-static int pmac_get_irq(struct pt_regs *regs)
+static unsigned int pmac_pic_get_irq(struct pt_regs *regs)
 {
 	int irq;
 	unsigned long bits = 0;
+	unsigned long flags;
 
 #ifdef CONFIG_SMP
 	void psurge_smp_message_recv(struct pt_regs *);
@@ -227,9 +247,10 @@
        	/* IPI's are a hack on the powersurge -- Cort */
        	if ( smp_processor_id() != 0 ) {
 		psurge_smp_message_recv(regs);
-		return -2;	/* ignore, already handled */
+		return NO_IRQ_IGNORE;	/* ignore, already handled */
         }
 #endif /* CONFIG_SMP */
+  	spin_lock_irqsave(&pmac_pic_lock, flags);
 	for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
 		int i = irq >> 5;
 		bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
@@ -241,133 +262,10 @@
 		irq += __ilog2(bits);
 		break;
 	}
-
-	return irq;
-}
-
-/* This routine will fix some missing interrupt values in the device tree
- * on the gatwick mac-io controller used by some PowerBooks
- *
- * Walking of OF nodes could use a bit more fixing up here, but it's not
- * very important as this is all boot time code on static portions of the
- * device-tree.
- *
- * However, the modifications done to "intrs" will have to be removed and
- * replaced with proper updates of the "interrupts" properties or
- * AAPL,interrupts, yet to be decided, once the dynamic parsing is there.
- */
-static void __init pmac_fix_gatwick_interrupts(struct device_node *gw,
-					       int irq_base)
-{
-	struct device_node *node;
-	int count;
-
-	memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
-	count = 0;
-	for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) {
-		/* Fix SCC */
-		if ((strcasecmp(node->name, "escc") == 0) && node->child) {
-			if (node->child->n_intrs < 3) {
-				node->child->intrs = &gatwick_int_pool[count];
-				count += 3;
-			}
-			node->child->n_intrs = 3;
-			node->child->intrs[0].line = 15+irq_base;
-			node->child->intrs[1].line =  4+irq_base;
-			node->child->intrs[2].line =  5+irq_base;
-			printk(KERN_INFO "irq: fixed SCC on gatwick"
-			       " (%d,%d,%d)\n",
-			       node->child->intrs[0].line,
-			       node->child->intrs[1].line,
-			       node->child->intrs[2].line);
-		}
-		/* Fix media-bay & left SWIM */
-		if (strcasecmp(node->name, "media-bay") == 0) {
-			struct device_node* ya_node;
-
-			if (node->n_intrs == 0)
-				node->intrs = &gatwick_int_pool[count++];
-			node->n_intrs = 1;
-			node->intrs[0].line = 29+irq_base;
-			printk(KERN_INFO "irq: fixed media-bay on gatwick"
-			       " (%d)\n", node->intrs[0].line);
-
-			ya_node = node->child;
-			while(ya_node) {
-				if (strcasecmp(ya_node->name, "floppy") == 0) {
-					if (ya_node->n_intrs < 2) {
-						ya_node->intrs = &gatwick_int_pool[count];
-						count += 2;
-					}
-					ya_node->n_intrs = 2;
-					ya_node->intrs[0].line = 19+irq_base;
-					ya_node->intrs[1].line =  1+irq_base;
-					printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
-						ya_node->intrs[0].line, ya_node->intrs[1].line);
-				}
-				if (strcasecmp(ya_node->name, "ata4") == 0) {
-					if (ya_node->n_intrs < 2) {
-						ya_node->intrs = &gatwick_int_pool[count];
-						count += 2;
-					}
-					ya_node->n_intrs = 2;
-					ya_node->intrs[0].line = 14+irq_base;
-					ya_node->intrs[1].line =  3+irq_base;
-					printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
-						ya_node->intrs[0].line, ya_node->intrs[1].line);
-				}
-				ya_node = ya_node->sibling;
-			}
-		}
-	}
-	if (count > 10) {
-		printk("WARNING !! Gatwick interrupt pool overflow\n");
-		printk("  GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
-		printk("              requested = %d\n", count);
-	}
-}
-
-/*
- * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
- * card which includes an ohare chip that acts as a second interrupt
- * controller.  If we find this second ohare, set it up and fix the
- * interrupt value in the device tree for the ethernet chip.
- */
-static void __init enable_second_ohare(struct device_node *np)
-{
-	unsigned char bus, devfn;
-	unsigned short cmd;
-	struct device_node *ether;
-
-	/* This code doesn't strictly belong here, it could be part of
-	 * either the PCI initialisation or the feature code. It's kept
-	 * here for historical reasons.
-	 */
-	if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
-		struct pci_controller* hose =
-			pci_find_hose_for_OF_device(np);
-		if (!hose) {
-			printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
-			return;
-		}
-		early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
-		cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-		cmd &= ~PCI_COMMAND_IO;
-		early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
-	}
-
-	/* Fix interrupt for the modem/ethernet combo controller. The number
-	 * in the device tree (27) is bogus (correct for the ethernet-only
-	 * board but not the combo ethernet/modem board).
-	 * The real interrupt is 28 on the second controller -> 28+32 = 60.
-	 */
-	ether = of_find_node_by_name(NULL, "pci1011,14");
-	if (ether && ether->n_intrs > 0) {
-		ether->intrs[0].line = 60;
-		printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
-		       ether->intrs[0].line);
-	}
-	of_node_put(ether);
+  	spin_unlock_irqrestore(&pmac_pic_lock, flags);
+	if (unlikely(irq < 0))
+		return NO_IRQ;
+	return irq_linear_revmap(pmac_pic_host, irq);
 }
 
 #ifdef CONFIG_XMON
@@ -386,17 +284,60 @@
 	.name		= "cascade",
 };
 
+static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	/* We match all, we don't always have a node anyway */
+	return 1;
+}
+
+static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
+			     irq_hw_number_t hw, unsigned int flags)
+{
+	struct irq_desc *desc = get_irq_desc(virq);
+	int level;
+
+	if (hw >= max_irqs)
+		return -EINVAL;
+
+	/* Mark level interrupts, set delayed disable for edge ones and set
+	 * handlers
+	 */
+	level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f)));
+	if (level)
+		desc->status |= IRQ_LEVEL;
+	else
+		desc->status |= IRQ_DELAYED_DISABLE;
+	set_irq_chip_and_handler(virq, &pmac_pic, level ?
+				 handle_level_irq : handle_edge_irq);
+	return 0;
+}
+
+static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+			       u32 *intspec, unsigned int intsize,
+			       irq_hw_number_t *out_hwirq,
+			       unsigned int *out_flags)
+
+{
+	*out_hwirq = *intspec;
+	return 0;
+}
+
+static struct irq_host_ops pmac_pic_host_ops = {
+	.match = pmac_pic_host_match,
+	.map = pmac_pic_host_map,
+	.xlate = pmac_pic_host_xlate,
+};
+
 static void __init pmac_pic_probe_oldstyle(void)
 {
         int i;
-	int irq_cascade = -1;
         struct device_node *master = NULL;
 	struct device_node *slave = NULL;
 	u8 __iomem *addr;
 	struct resource r;
 
 	/* Set our get_irq function */
-	ppc_md.get_irq = pmac_get_irq;
+	ppc_md.get_irq = pmac_pic_get_irq;
 
 	/*
 	 * Find the interrupt controller type & node
@@ -414,7 +355,6 @@
 		if (slave) {
 			max_irqs = 64;
 			level_mask[1] = OHARE_LEVEL_MASK;
-			enable_second_ohare(slave);
 		}
 	} else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
 		max_irqs = max_real_irqs = 64;
@@ -438,14 +378,18 @@
 			max_irqs = 128;
 			level_mask[2] = HEATHROW_LEVEL_MASK;
 			level_mask[3] = 0;
-			pmac_fix_gatwick_interrupts(slave, max_real_irqs);
 		}
 	}
 	BUG_ON(master == NULL);
 
-	/* Set the handler for the main PIC */
-	for ( i = 0; i < max_real_irqs ; i++ )
-		irq_desc[i].chip = &pmac_pic;
+	/*
+	 * Allocate an irq host
+	 */
+	pmac_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, max_irqs,
+				       &pmac_pic_host_ops,
+				       max_irqs);
+	BUG_ON(pmac_pic_host == NULL);
+	irq_set_default_host(pmac_pic_host);
 
 	/* Get addresses of first controller if we have a node for it */
 	BUG_ON(of_address_to_resource(master, 0, &r));
@@ -472,39 +416,38 @@
 			pmac_irq_hw[i++] =
 				(volatile struct pmac_irq_hw __iomem *)
 				(addr + 0x10);
-		irq_cascade = slave->intrs[0].line;
+		pmac_irq_cascade = irq_of_parse_and_map(slave, 0);
 
 		printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs"
 		       " cascade: %d\n", slave->full_name,
-		       max_irqs - max_real_irqs, irq_cascade);
+		       max_irqs - max_real_irqs, pmac_irq_cascade);
 	}
 	of_node_put(slave);
 
-	/* disable all interrupts in all controllers */
+	/* Disable all interrupts in all controllers */
 	for (i = 0; i * 32 < max_irqs; ++i)
 		out_le32(&pmac_irq_hw[i]->enable, 0);
 
-	/* mark level interrupts */
-	for (i = 0; i < max_irqs; i++)
-		if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
-			irq_desc[i].status = IRQ_LEVEL;
+	/* Hookup cascade irq */
+	if (slave && pmac_irq_cascade != NO_IRQ)
+		setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
 
-	/* Setup handlers for secondary controller and hook cascade irq*/
-	if (slave) {
-		for ( i = max_real_irqs ; i < max_irqs ; i++ )
-			irq_desc[i].chip = &gatwick_pic;
-		setup_irq(irq_cascade, &gatwick_cascade_action);
-	}
 	printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
 #ifdef CONFIG_XMON
-	setup_irq(20, &xmon_action);
+	setup_irq(irq_create_mapping(NULL, 20, 0), &xmon_action);
 #endif
 }
 #endif /* CONFIG_PPC32 */
 
-static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc,
+			    struct pt_regs *regs)
 {
-	return mpic_get_one_irq((struct mpic *)data, regs);
+	struct mpic *mpic = desc->handler_data;
+
+	unsigned int cascade_irq = mpic_get_one_irq(mpic, regs);
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	desc->chip->eoi(irq);
 }
 
 static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
@@ -514,21 +457,20 @@
 	int nmi_irq;
 
 	pswitch = of_find_node_by_name(NULL, "programmer-switch");
-	if (pswitch && pswitch->n_intrs) {
-		nmi_irq = pswitch->intrs[0].line;
-		mpic_irq_set_priority(nmi_irq, 9);
-		setup_irq(nmi_irq, &xmon_action);
+	if (pswitch) {
+		nmi_irq = irq_of_parse_and_map(pswitch, 0);
+		if (nmi_irq != NO_IRQ) {
+			mpic_irq_set_priority(nmi_irq, 9);
+			setup_irq(nmi_irq, &xmon_action);
+		}
+		of_node_put(pswitch);
 	}
-	of_node_put(pswitch);
 #endif	/* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */
 }
 
 static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
 						int master)
 {
-	unsigned char senses[128];
-	int offset = master ? 0 : 128;
-	int count = master ? 128 : 124;
 	const char *name = master ? " MPIC 1   " : " MPIC 2   ";
 	struct resource r;
 	struct mpic *mpic;
@@ -541,8 +483,6 @@
 
 	pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
 
-	prom_get_irq_senses(senses, offset, offset + count);
-
 	flags |= MPIC_WANTS_RESET;
 	if (get_property(np, "big-endian", NULL))
 		flags |= MPIC_BIG_ENDIAN;
@@ -553,8 +493,7 @@
 	if (master && (flags & MPIC_BIG_ENDIAN))
 		flags |= MPIC_BROKEN_U3;
 
-	mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0,
-			  senses, count, name);
+	mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
 	if (mpic == NULL)
 		return NULL;
 
@@ -567,6 +506,7 @@
 {
 	struct mpic *mpic1, *mpic2;
 	struct device_node *np, *master = NULL, *slave = NULL;
+	unsigned int cascade;
 
 	/* We can have up to 2 MPICs cascaded */
 	for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
@@ -603,16 +543,24 @@
 	of_node_put(master);
 
 	/* No slave, let's go out */
-	if (slave == NULL || slave->n_intrs < 1)
+	if (slave == NULL)
 		return 0;
 
+	/* Get/Map slave interrupt */
+	cascade = irq_of_parse_and_map(slave, 0);
+	if (cascade == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade IRQ\n");
+		return 0;
+	}
+
 	mpic2 = pmac_setup_one_mpic(slave, 0);
 	if (mpic2 == NULL) {
 		printk(KERN_ERR "Failed to setup slave MPIC\n");
 		of_node_put(slave);
 		return 0;
 	}
-	mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2);
+	set_irq_data(cascade, mpic2);
+	set_irq_chained_handler(cascade, pmac_u3_cascade);
 
 	of_node_put(slave);
 	return 0;
@@ -621,6 +569,19 @@
 
 void __init pmac_pic_init(void)
 {
+	unsigned int flags = 0;
+
+	/* We configure the OF parsing based on our oldworld vs. newworld
+	 * platform type and wether we were booted by BootX.
+	 */
+#ifdef CONFIG_PPC32
+	if (!pmac_newworld)
+		flags |= OF_IMAP_OLDWORLD_MAC;
+	if (get_property(of_chosen, "linux,bootx", NULL) != NULL)
+		flags |= OF_IMAP_NO_PHANDLE;
+	of_irq_map_init(flags);
+#endif /* CONFIG_PPC_32 */
+
 	/* We first try to detect Apple's new Core99 chipset, since mac-io
 	 * is quite different on those machines and contains an IBM MPIC2.
 	 */
@@ -643,6 +604,7 @@
 
 /* This used to be passed by the PMU driver but that link got
  * broken with the new driver model. We use this tweak for now...
+ * We really want to do things differently though...
  */
 static int pmacpic_find_viaint(void)
 {
@@ -656,7 +618,7 @@
 	np = of_find_node_by_name(NULL, "via-pmu");
 	if (np == NULL)
 		goto not_found;
-	viaint = np->intrs[0].line;
+	viaint = irq_of_parse_and_map(np, 0);;
 #endif /* CONFIG_ADB_PMU */
 
 not_found:
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index 21c7b0f..94e7b24 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -12,6 +12,8 @@
 
 struct rtc_time;
 
+extern int pmac_newworld;
+
 extern long pmac_time_init(void);
 extern unsigned long pmac_get_boot_time(void);
 extern void pmac_get_rtc_time(struct rtc_time *);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 8654b5f..31a9da7 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -613,9 +613,6 @@
 	udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
 
 #ifdef CONFIG_PPC64
-	/* Setup interrupt mapping options */
-	ppc64_interrupt_controller = IC_OPEN_PIC;
-
 	iommu_init_early_dart();
 #endif
 }
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 9639c66..9df783088 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -72,32 +72,62 @@
 
 /* #define DEBUG */
 
-static void request_ras_irqs(struct device_node *np, char *propname,
+
+static void request_ras_irqs(struct device_node *np,
 			irqreturn_t (*handler)(int, void *, struct pt_regs *),
 			const char *name)
 {
-	unsigned int *ireg, len, i;
-	int virq, n_intr;
+	int i, index, count = 0;
+	struct of_irq oirq;
+	u32 *opicprop;
+	unsigned int opicplen;
+	unsigned int virqs[16];
 
-	ireg = (unsigned int *)get_property(np, propname, &len);
-	if (ireg == NULL)
-		return;
-	n_intr = prom_n_intr_cells(np);
-	len /= n_intr * sizeof(*ireg);
+	/* Check for obsolete "open-pic-interrupt" property. If present, then
+	 * map those interrupts using the default interrupt host and default
+	 * trigger
+	 */
+	opicprop = (u32 *)get_property(np, "open-pic-interrupt", &opicplen);
+	if (opicprop) {
+		opicplen /= sizeof(u32);
+		for (i = 0; i < opicplen; i++) {
+			if (count > 15)
+				break;
+			virqs[count] = irq_create_mapping(NULL, *(opicprop++),
+							 IRQ_TYPE_NONE);
+			if (virqs[count] == NO_IRQ)
+				printk(KERN_ERR "Unable to allocate interrupt "
+				       "number for %s\n", np->full_name);
+			else
+				count++;
 
-	for (i = 0; i < len; i++) {
-		virq = virt_irq_create_mapping(*ireg);
-		if (virq == NO_IRQ) {
-			printk(KERN_ERR "Unable to allocate interrupt "
-			       "number for %s\n", np->full_name);
-			return;
 		}
-		if (request_irq(irq_offset_up(virq), handler, 0, name, NULL)) {
+	}
+	/* Else use normal interrupt tree parsing */
+	else {
+		/* First try to do a proper OF tree parsing */
+		for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
+		     index++) {
+			if (count > 15)
+				break;
+			virqs[count] = irq_create_of_mapping(oirq.controller,
+							    oirq.specifier,
+							    oirq.size);
+			if (virqs[count] == NO_IRQ)
+				printk(KERN_ERR "Unable to allocate interrupt "
+				       "number for %s\n", np->full_name);
+			else
+				count++;
+		}
+	}
+
+	/* Now request them */
+	for (i = 0; i < count; i++) {
+		if (request_irq(virqs[i], handler, 0, name, NULL)) {
 			printk(KERN_ERR "Unable to request interrupt %d for "
-			       "%s\n", irq_offset_up(virq), np->full_name);
+			       "%s\n", virqs[i], np->full_name);
 			return;
 		}
-		ireg += n_intr;
 	}
 }
 
@@ -115,20 +145,14 @@
 	/* Internal Errors */
 	np = of_find_node_by_path("/event-sources/internal-errors");
 	if (np != NULL) {
-		request_ras_irqs(np, "open-pic-interrupt", ras_error_interrupt,
-				 "RAS_ERROR");
-		request_ras_irqs(np, "interrupts", ras_error_interrupt,
-				 "RAS_ERROR");
+		request_ras_irqs(np, ras_error_interrupt, "RAS_ERROR");
 		of_node_put(np);
 	}
 
 	/* EPOW Events */
 	np = of_find_node_by_path("/event-sources/epow-events");
 	if (np != NULL) {
-		request_ras_irqs(np, "open-pic-interrupt", ras_epow_interrupt,
-				 "RAS_EPOW");
-		request_ras_irqs(np, "interrupts", ras_epow_interrupt,
-				 "RAS_EPOW");
+		request_ras_irqs(np, ras_epow_interrupt, "RAS_EPOW");
 		of_node_put(np);
 	}
 
@@ -162,7 +186,7 @@
 
 	status = rtas_call(ras_check_exception_token, 6, 1, NULL,
 			   RAS_VECTOR_OFFSET,
-			   virt_irq_to_real(irq_offset_down(irq)),
+			   irq_map[irq].hwirq,
 			   RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS,
 			   critical, __pa(&ras_log_buf),
 				rtas_get_error_log_max());
@@ -198,7 +222,7 @@
 
 	status = rtas_call(ras_check_exception_token, 6, 1, NULL,
 			   RAS_VECTOR_OFFSET,
-			   virt_irq_to_real(irq_offset_down(irq)),
+			   irq_map[irq].hwirq,
 			   RTAS_INTERNAL_ERROR, 1 /*Time Critical */,
 			   __pa(&ras_log_buf),
 				rtas_get_error_log_max());
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 999509d..54a5243 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -76,6 +76,9 @@
 #define DBG(fmt...)
 #endif
 
+/* move those away to a .h */
+extern void smp_init_pseries_mpic(void);
+extern void smp_init_pseries_xics(void);
 extern void find_udbg_vterm(void);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
@@ -83,7 +86,7 @@
 static void pseries_shared_idle_sleep(void);
 static void pseries_dedicated_idle_sleep(void);
 
-struct mpic *pSeries_mpic;
+static struct device_node *pSeries_mpic_node;
 
 static void pSeries_show_cpuinfo(struct seq_file *m)
 {
@@ -118,63 +121,92 @@
 		fwnmi_active = 1;
 }
 
-static void __init pSeries_init_mpic(void)
+void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc,
+			  struct pt_regs *regs)
 {
-        unsigned int *addrp;
-	struct device_node *np;
-	unsigned long intack = 0;
-
-	/* All ISUs are setup, complete initialization */
-	mpic_init(pSeries_mpic);
-
-	/* Check what kind of cascade ACK we have */
-        if (!(np = of_find_node_by_name(NULL, "pci"))
-            || !(addrp = (unsigned int *)
-                 get_property(np, "8259-interrupt-acknowledge", NULL)))
-                printk(KERN_ERR "Cannot find pci to get ack address\n");
-        else
-		intack = addrp[prom_n_addr_cells(np)-1];
-	of_node_put(np);
-
-	/* Setup the legacy interrupts & controller */
-	i8259_init(intack, 0);
-
-	/* Hook cascade to mpic */
-	mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+	unsigned int cascade_irq = i8259_irq(regs);
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	desc->chip->eoi(irq);
 }
 
-static void __init pSeries_setup_mpic(void)
+static void __init pseries_mpic_init_IRQ(void)
 {
+	struct device_node *np, *old, *cascade = NULL;
+        unsigned int *addrp;
+	unsigned long intack = 0;
 	unsigned int *opprop;
 	unsigned long openpic_addr = 0;
-        unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS];
-        struct device_node *root;
-	int irq_count;
+	unsigned int cascade_irq;
+	int naddr, n, i, opplen;
+	struct mpic *mpic;
 
-	/* Find the Open PIC if present */
-	root = of_find_node_by_path("/");
-	opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL);
+	np = of_find_node_by_path("/");
+	naddr = prom_n_addr_cells(np);
+	opprop = (unsigned int *) get_property(np, "platform-open-pic", &opplen);
 	if (opprop != 0) {
-		int n = prom_n_addr_cells(root);
-
-		for (openpic_addr = 0; n > 0; --n)
-			openpic_addr = (openpic_addr << 32) + *opprop++;
+		openpic_addr = of_read_number(opprop, naddr);
 		printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 	}
-	of_node_put(root);
+	of_node_put(np);
 
 	BUG_ON(openpic_addr == 0);
 
-	/* Get the sense values from OF */
-	prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS);
-	
 	/* Setup the openpic driver */
-	irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
-	pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY,
-				  16, 16, irq_count, /* isu size, irq offset, irq count */ 
-				  NR_IRQS - 4, /* ipi offset */
-				  senses, irq_count, /* sense & sense size */
-				  " MPIC     ");
+	mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
+			  MPIC_PRIMARY,
+			  16, 250, /* isu size, irq count */
+			  " MPIC     ");
+	BUG_ON(mpic == NULL);
+
+	/* Add ISUs */
+	opplen /= sizeof(u32);
+	for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+		unsigned long isuaddr = of_read_number(opprop + i, naddr);
+		mpic_assign_isu(mpic, n, isuaddr);
+	}
+
+	/* All ISUs are setup, complete initialization */
+	mpic_init(mpic);
+
+	/* Look for cascade */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (device_is_compatible(np, "chrp,iic")) {
+			cascade = np;
+			break;
+		}
+	if (cascade == NULL)
+		return;
+
+	cascade_irq = irq_of_parse_and_map(cascade, 0);
+	if (cascade == NO_IRQ) {
+		printk(KERN_ERR "xics: failed to map cascade interrupt");
+		return;
+	}
+
+	/* Check ACK type */
+	for (old = of_node_get(cascade); old != NULL ; old = np) {
+		np = of_get_parent(old);
+		of_node_put(old);
+		if (np == NULL)
+			break;
+		if (strcmp(np->name, "pci") != 0)
+			continue;
+		addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge",
+					    NULL);
+		if (addrp == NULL)
+			continue;
+		naddr = prom_n_addr_cells(np);
+		intack = addrp[naddr-1];
+		if (naddr > 1)
+			intack |= ((unsigned long)addrp[naddr-2]) << 32;
+	}
+	if (intack)
+		printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n",
+		       intack);
+	i8259_init(cascade, intack);
+	of_node_put(cascade);
+	set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
 }
 
 static void pseries_lpar_enable_pmcs(void)
@@ -192,23 +224,67 @@
 		get_lppaca()->pmcregs_in_use = 1;
 }
 
+#ifdef CONFIG_KEXEC
+static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary)
+{
+	mpic_teardown_this_cpu(secondary);
+}
+
+static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary)
+{
+	/* Don't risk a hypervisor call if we're crashing */
+	if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
+		unsigned long vpa = __pa(get_lppaca());
+
+		if (unregister_vpa(hard_smp_processor_id(), vpa)) {
+			printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
+					"failed\n", smp_processor_id(),
+					hard_smp_processor_id());
+		}
+	}
+	xics_teardown_cpu(secondary);
+}
+#endif /* CONFIG_KEXEC */
+
+static void __init pseries_discover_pic(void)
+{
+	struct device_node *np;
+	char *typep;
+
+	for (np = NULL; (np = of_find_node_by_name(np,
+						   "interrupt-controller"));) {
+		typep = (char *)get_property(np, "compatible", NULL);
+		if (strstr(typep, "open-pic")) {
+			pSeries_mpic_node = of_node_get(np);
+			ppc_md.init_IRQ       = pseries_mpic_init_IRQ;
+			ppc_md.get_irq        = mpic_get_irq;
+#ifdef CONFIG_KEXEC
+			ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic;
+#endif
+#ifdef CONFIG_SMP
+			smp_init_pseries_mpic();
+#endif
+			return;
+		} else if (strstr(typep, "ppc-xicp")) {
+			ppc_md.init_IRQ       = xics_init_IRQ;
+#ifdef CONFIG_KEXEC
+			ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics;
+#endif
+#ifdef CONFIG_SMP
+			smp_init_pseries_xics();
+#endif
+			return;
+		}
+	}
+	printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
+	       " interrupt-controller\n");
+}
+
 static void __init pSeries_setup_arch(void)
 {
-	/* Fixup ppc_md depending on the type of interrupt controller */
-	if (ppc64_interrupt_controller == IC_OPEN_PIC) {
-		ppc_md.init_IRQ       = pSeries_init_mpic;
-		ppc_md.get_irq        = mpic_get_irq;
-		/* Allocate the mpic now, so that find_and_init_phbs() can
-		 * fill the ISUs */
-		pSeries_setup_mpic();
-	} else {
-		ppc_md.init_IRQ       = xics_init_IRQ;
-		ppc_md.get_irq        = xics_get_irq;
-	}
+	/* Discover PIC type and setup ppc_md accordingly */
+	pseries_discover_pic();
 
-#ifdef CONFIG_SMP
-	smp_init_pSeries();
-#endif
 	/* openpic global configuration register (64-bit format). */
 	/* openpic Interrupt Source Unit pointer (64-bit format). */
 	/* python0 facility area (mmio) (64-bit format) REAL address. */
@@ -260,41 +336,11 @@
 }
 arch_initcall(pSeries_init_panel);
 
-static  void __init pSeries_discover_pic(void)
-{
-	struct device_node *np;
-	char *typep;
-
-	/*
-	 * Setup interrupt mapping options that are needed for finish_device_tree
-	 * to properly parse the OF interrupt tree & do the virtual irq mapping
-	 */
-	__irq_offset_value = NUM_ISA_INTERRUPTS;
-	ppc64_interrupt_controller = IC_INVALID;
-	for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) {
-		typep = (char *)get_property(np, "compatible", NULL);
-		if (strstr(typep, "open-pic")) {
-			ppc64_interrupt_controller = IC_OPEN_PIC;
-			break;
-		} else if (strstr(typep, "ppc-xicp")) {
-			ppc64_interrupt_controller = IC_PPC_XIC;
-			break;
-		}
-	}
-	if (ppc64_interrupt_controller == IC_INVALID)
-		printk("pSeries_discover_pic: failed to recognize"
-			" interrupt-controller\n");
-
-}
-
 static void pSeries_mach_cpu_die(void)
 {
 	local_irq_disable();
 	idle_task_exit();
-	/* Some hardware requires clearing the CPPR, while other hardware does not
-	 * it is safe either way
-	 */
-	pSeriesLP_cppr_info(0, 0);
+	xics_teardown_cpu(0);
 	rtas_stop_self();
 	/* Should never get here... */
 	BUG();
@@ -332,8 +378,6 @@
 
 	iommu_init_early_pSeries();
 
-	pSeries_discover_pic();
-
 	DBG(" <- pSeries_init_early()\n");
 }
 
@@ -505,27 +549,6 @@
 	return PCI_PROBE_NORMAL;
 }
 
-#ifdef CONFIG_KEXEC
-static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
-{
-	/* Don't risk a hypervisor call if we're crashing */
-	if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
-		unsigned long vpa = __pa(get_lppaca());
-
-		if (unregister_vpa(hard_smp_processor_id(), vpa)) {
-			printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
-					"failed\n", smp_processor_id(),
-					hard_smp_processor_id());
-		}
-	}
-
-	if (ppc64_interrupt_controller == IC_OPEN_PIC)
-		mpic_teardown_this_cpu(secondary);
-	else
-		xics_teardown_cpu(secondary);
-}
-#endif
-
 define_machine(pseries) {
 	.name			= "pSeries",
 	.probe			= pSeries_probe,
@@ -550,7 +573,6 @@
 	.system_reset_exception = pSeries_system_reset_exception,
 	.machine_check_exception = pSeries_machine_check_exception,
 #ifdef CONFIG_KEXEC
-	.kexec_cpu_down		= pseries_kexec_cpu_down,
 	.machine_kexec		= default_machine_kexec,
 	.machine_kexec_prepare	= default_machine_kexec_prepare,
 	.machine_crash_shutdown	= default_machine_crash_shutdown,
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 4ad144d..ac61098 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -416,27 +416,12 @@
 #endif
 
 /* This is called very early */
-void __init smp_init_pSeries(void)
+static void __init smp_init_pseries(void)
 {
 	int i;
 
 	DBG(" -> smp_init_pSeries()\n");
 
-	switch (ppc64_interrupt_controller) {
-#ifdef CONFIG_MPIC
-	case IC_OPEN_PIC:
-		smp_ops = &pSeries_mpic_smp_ops;
-		break;
-#endif
-#ifdef CONFIG_XICS
-	case IC_PPC_XIC:
-		smp_ops = &pSeries_xics_smp_ops;
-		break;
-#endif
-	default:
-		panic("Invalid interrupt controller");
-	}
-
 #ifdef CONFIG_HOTPLUG_CPU
 	smp_ops->cpu_disable = pSeries_cpu_disable;
 	smp_ops->cpu_die = pSeries_cpu_die;
@@ -471,3 +456,18 @@
 	DBG(" <- smp_init_pSeries()\n");
 }
 
+#ifdef CONFIG_MPIC
+void __init smp_init_pseries_mpic(void)
+{
+	smp_ops = &pSeries_mpic_smp_ops;
+
+	smp_init_pseries();
+}
+#endif
+
+void __init smp_init_pseries_xics(void)
+{
+	smp_ops = &pSeries_xics_smp_ops;
+
+	smp_init_pseries();
+}
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 2ffebe3..716972a 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -8,6 +8,9 @@
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
+
+#undef DEBUG
+
 #include <linux/types.h>
 #include <linux/threads.h>
 #include <linux/kernel.h>
@@ -19,6 +22,7 @@
 #include <linux/gfp.h>
 #include <linux/radix-tree.h>
 #include <linux/cpu.h>
+
 #include <asm/firmware.h>
 #include <asm/prom.h>
 #include <asm/io.h>
@@ -31,26 +35,6 @@
 
 #include "xics.h"
 
-static unsigned int xics_startup(unsigned int irq);
-static void xics_enable_irq(unsigned int irq);
-static void xics_disable_irq(unsigned int irq);
-static void xics_mask_and_ack_irq(unsigned int irq);
-static void xics_end_irq(unsigned int irq);
-static void xics_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-static struct hw_interrupt_type xics_pic = {
-	.typename = " XICS     ",
-	.startup = xics_startup,
-	.enable = xics_enable_irq,
-	.disable = xics_disable_irq,
-	.ack = xics_mask_and_ack_irq,
-	.end = xics_end_irq,
-	.set_affinity = xics_set_affinity
-};
-
-/* This is used to map real irq numbers to virtual */
-static struct radix_tree_root irq_map = RADIX_TREE_INIT(GFP_ATOMIC);
-
 #define XICS_IPI		2
 #define XICS_IRQ_SPURIOUS	0
 
@@ -81,12 +65,12 @@
 
 static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS];
 
-static int xics_irq_8259_cascade = 0;
-static int xics_irq_8259_cascade_real = 0;
 static unsigned int default_server = 0xFF;
 static unsigned int default_distrib_server = 0;
 static unsigned int interrupt_server_size = 8;
 
+static struct irq_host *xics_host;
+
 /*
  * XICS only has a single IPI, so encode the messages per CPU
  */
@@ -98,48 +82,34 @@
 static int ibm_int_on;
 static int ibm_int_off;
 
-typedef struct {
-	int (*xirr_info_get)(int cpu);
-	void (*xirr_info_set)(int cpu, int val);
-	void (*cppr_info)(int cpu, u8 val);
-	void (*qirr_info)(int cpu, u8 val);
-} xics_ops;
+
+/* Direct HW low level accessors */
 
 
-/* SMP */
-
-static int pSeries_xirr_info_get(int n_cpu)
+static inline unsigned int direct_xirr_info_get(int n_cpu)
 {
 	return in_be32(&xics_per_cpu[n_cpu]->xirr.word);
 }
 
-static void pSeries_xirr_info_set(int n_cpu, int value)
+static inline void direct_xirr_info_set(int n_cpu, int value)
 {
 	out_be32(&xics_per_cpu[n_cpu]->xirr.word, value);
 }
 
-static void pSeries_cppr_info(int n_cpu, u8 value)
+static inline void direct_cppr_info(int n_cpu, u8 value)
 {
 	out_8(&xics_per_cpu[n_cpu]->xirr.bytes[0], value);
 }
 
-static void pSeries_qirr_info(int n_cpu, u8 value)
+static inline void direct_qirr_info(int n_cpu, u8 value)
 {
 	out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value);
 }
 
-static xics_ops pSeries_ops = {
-	pSeries_xirr_info_get,
-	pSeries_xirr_info_set,
-	pSeries_cppr_info,
-	pSeries_qirr_info
-};
 
-static xics_ops *ops = &pSeries_ops;
+/* LPAR low level accessors */
 
 
-/* LPAR */
-
 static inline long plpar_eoi(unsigned long xirr)
 {
 	return plpar_hcall_norets(H_EOI, xirr);
@@ -161,7 +131,7 @@
 	return plpar_hcall(H_XIRR, 0, 0, 0, 0, xirr_ret, &dummy, &dummy);
 }
 
-static int pSeriesLP_xirr_info_get(int n_cpu)
+static inline unsigned int lpar_xirr_info_get(int n_cpu)
 {
 	unsigned long lpar_rc;
 	unsigned long return_value;
@@ -169,10 +139,10 @@
 	lpar_rc = plpar_xirr(&return_value);
 	if (lpar_rc != H_SUCCESS)
 		panic(" bad return code xirr - rc = %lx \n", lpar_rc);
-	return (int)return_value;
+	return (unsigned int)return_value;
 }
 
-static void pSeriesLP_xirr_info_set(int n_cpu, int value)
+static inline void lpar_xirr_info_set(int n_cpu, int value)
 {
 	unsigned long lpar_rc;
 	unsigned long val64 = value & 0xffffffff;
@@ -183,7 +153,7 @@
 		      val64);
 }
 
-void pSeriesLP_cppr_info(int n_cpu, u8 value)
+static inline void lpar_cppr_info(int n_cpu, u8 value)
 {
 	unsigned long lpar_rc;
 
@@ -192,7 +162,7 @@
 		panic("bad return code cppr - rc = %lx\n", lpar_rc);
 }
 
-static void pSeriesLP_qirr_info(int n_cpu , u8 value)
+static inline void lpar_qirr_info(int n_cpu , u8 value)
 {
 	unsigned long lpar_rc;
 
@@ -201,43 +171,16 @@
 		panic("bad return code qirr - rc = %lx\n", lpar_rc);
 }
 
-xics_ops pSeriesLP_ops = {
-	pSeriesLP_xirr_info_get,
-	pSeriesLP_xirr_info_set,
-	pSeriesLP_cppr_info,
-	pSeriesLP_qirr_info
-};
 
-static unsigned int xics_startup(unsigned int virq)
-{
-	unsigned int irq;
+/* High level handlers and init code */
 
-	irq = irq_offset_down(virq);
-	if (radix_tree_insert(&irq_map, virt_irq_to_real(irq),
-			      &virt_irq_to_real_map[irq]) == -ENOMEM)
-		printk(KERN_CRIT "Out of memory creating real -> virtual"
-		       " IRQ mapping for irq %u (real 0x%x)\n",
-		       virq, virt_irq_to_real(irq));
-	xics_enable_irq(virq);
-	return 0;	/* return value is ignored */
-}
-
-static unsigned int real_irq_to_virt(unsigned int real_irq)
-{
-	unsigned int *ptr;
-
-	ptr = radix_tree_lookup(&irq_map, real_irq);
-	if (ptr == NULL)
-		return NO_IRQ;
-	return ptr - virt_irq_to_real_map;
-}
 
 #ifdef CONFIG_SMP
-static int get_irq_server(unsigned int irq)
+static int get_irq_server(unsigned int virq)
 {
 	unsigned int server;
 	/* For the moment only implement delivery to all cpus or one cpu */
-	cpumask_t cpumask = irq_desc[irq].affinity;
+	cpumask_t cpumask = irq_desc[virq].affinity;
 	cpumask_t tmp = CPU_MASK_NONE;
 
 	if (!distribute_irqs)
@@ -258,23 +201,28 @@
 
 }
 #else
-static int get_irq_server(unsigned int irq)
+static int get_irq_server(unsigned int virq)
 {
 	return default_server;
 }
 #endif
 
-static void xics_enable_irq(unsigned int virq)
+
+static void xics_unmask_irq(unsigned int virq)
 {
 	unsigned int irq;
 	int call_status;
 	unsigned int server;
 
-	irq = virt_irq_to_real(irq_offset_down(virq));
-	if (irq == XICS_IPI)
+	pr_debug("xics: unmask virq %d\n", virq);
+
+	irq = (unsigned int)irq_map[virq].hwirq;
+	pr_debug(" -> map to hwirq 0x%x\n", irq);
+	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
 	server = get_irq_server(virq);
+
 	call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server,
 				DEFAULT_PRIORITY);
 	if (call_status != 0) {
@@ -293,7 +241,7 @@
 	}
 }
 
-static void xics_disable_real_irq(unsigned int irq)
+static void xics_mask_real_irq(unsigned int irq)
 {
 	int call_status;
 	unsigned int server;
@@ -318,75 +266,86 @@
 	}
 }
 
-static void xics_disable_irq(unsigned int virq)
+static void xics_mask_irq(unsigned int virq)
 {
 	unsigned int irq;
 
-	irq = virt_irq_to_real(irq_offset_down(virq));
-	xics_disable_real_irq(irq);
+	pr_debug("xics: mask virq %d\n", virq);
+
+	irq = (unsigned int)irq_map[virq].hwirq;
+	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
+		return;
+	xics_mask_real_irq(irq);
 }
 
-static void xics_end_irq(unsigned int irq)
+static unsigned int xics_startup(unsigned int virq)
+{
+	unsigned int irq;
+
+	/* force a reverse mapping of the interrupt so it gets in the cache */
+	irq = (unsigned int)irq_map[virq].hwirq;
+	irq_radix_revmap(xics_host, irq);
+
+	/* unmask it */
+	xics_unmask_irq(virq);
+	return 0;
+}
+
+static void xics_eoi_direct(unsigned int virq)
 {
 	int cpu = smp_processor_id();
+	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
 	iosync();
-	ops->xirr_info_set(cpu, ((0xff << 24) |
-				 (virt_irq_to_real(irq_offset_down(irq)))));
-
+	direct_xirr_info_set(cpu, (0xff << 24) | irq);
 }
 
-static void xics_mask_and_ack_irq(unsigned int irq)
+
+static void xics_eoi_lpar(unsigned int virq)
 {
 	int cpu = smp_processor_id();
+	unsigned int irq = (unsigned int)irq_map[virq].hwirq;
 
-	if (irq < irq_offset_value()) {
-		i8259_pic.ack(irq);
-		iosync();
-		ops->xirr_info_set(cpu, ((0xff<<24) |
-					 xics_irq_8259_cascade_real));
-		iosync();
-	}
+	iosync();
+	lpar_xirr_info_set(cpu, (0xff << 24) | irq);
 }
 
-int xics_get_irq(struct pt_regs *regs)
+static inline unsigned int xics_remap_irq(unsigned int vec)
 {
-	unsigned int cpu = smp_processor_id();
-	unsigned int vec;
-	int irq;
+	unsigned int irq;
 
-	vec = ops->xirr_info_get(cpu);
-	/*  (vec >> 24) == old priority */
 	vec &= 0x00ffffff;
 
-	/* for sanity, this had better be < NR_IRQS - 16 */
-	if (vec == xics_irq_8259_cascade_real) {
-		irq = i8259_irq(regs);
-		xics_end_irq(irq_offset_up(xics_irq_8259_cascade));
-	} else if (vec == XICS_IRQ_SPURIOUS) {
-		irq = -1;
-	} else {
-		irq = real_irq_to_virt(vec);
-		if (irq == NO_IRQ)
-			irq = real_irq_to_virt_slowpath(vec);
-		if (irq == NO_IRQ) {
-			printk(KERN_ERR "Interrupt %u (real) is invalid,"
-			       " disabling it.\n", vec);
-			xics_disable_real_irq(vec);
-		} else
-			irq = irq_offset_up(irq);
-	}
-	return irq;
+	if (vec == XICS_IRQ_SPURIOUS)
+		return NO_IRQ;
+	irq = irq_radix_revmap(xics_host, vec);
+	if (likely(irq != NO_IRQ))
+		return irq;
+
+	printk(KERN_ERR "Interrupt %u (real) is invalid,"
+	       " disabling it.\n", vec);
+	xics_mask_real_irq(vec);
+	return NO_IRQ;
+}
+
+static unsigned int xics_get_irq_direct(struct pt_regs *regs)
+{
+	unsigned int cpu = smp_processor_id();
+
+	return xics_remap_irq(direct_xirr_info_get(cpu));
+}
+
+static unsigned int xics_get_irq_lpar(struct pt_regs *regs)
+{
+	unsigned int cpu = smp_processor_id();
+
+	return xics_remap_irq(lpar_xirr_info_get(cpu));
 }
 
 #ifdef CONFIG_SMP
 
-static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t xics_ipi_dispatch(int cpu, struct pt_regs *regs)
 {
-	int cpu = smp_processor_id();
-
-	ops->qirr_info(cpu, 0xff);
-
 	WARN_ON(cpu_is_offline(cpu));
 
 	while (xics_ipi_message[cpu].value) {
@@ -418,183 +377,42 @@
 	return IRQ_HANDLED;
 }
 
-void xics_cause_IPI(int cpu)
-{
-	ops->qirr_info(cpu, IPI_PRIORITY);
-}
-#endif /* CONFIG_SMP */
-
-void xics_setup_cpu(void)
+static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id, struct pt_regs *regs)
 {
 	int cpu = smp_processor_id();
 
-	ops->cppr_info(cpu, 0xff);
-	iosync();
+	direct_qirr_info(cpu, 0xff);
 
-	/*
-	 * Put the calling processor into the GIQ.  This is really only
-	 * necessary from a secondary thread as the OF start-cpu interface
-	 * performs this function for us on primary threads.
-	 *
-	 * XXX: undo of teardown on kexec needs this too, as may hotplug
-	 */
-	rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
-		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
+	return xics_ipi_dispatch(cpu, regs);
 }
 
-void xics_init_IRQ(void)
+static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id, struct pt_regs *regs)
 {
-	int i;
-	unsigned long intr_size = 0;
-	struct device_node *np;
-	uint *ireg, ilen, indx = 0;
-	unsigned long intr_base = 0;
-	struct xics_interrupt_node {
-		unsigned long addr;
-		unsigned long size;
-	} intnodes[NR_CPUS];
+	int cpu = smp_processor_id();
 
-	ppc64_boot_msg(0x20, "XICS Init");
+	lpar_qirr_info(cpu, 0xff);
 
-	ibm_get_xive = rtas_token("ibm,get-xive");
-	ibm_set_xive = rtas_token("ibm,set-xive");
-	ibm_int_on  = rtas_token("ibm,int-on");
-	ibm_int_off = rtas_token("ibm,int-off");
+	return xics_ipi_dispatch(cpu, regs);
+}
 
-	np = of_find_node_by_type(NULL, "PowerPC-External-Interrupt-Presentation");
-	if (!np)
-		panic("xics_init_IRQ: can't find interrupt presentation");
-
-nextnode:
-	ireg = (uint *)get_property(np, "ibm,interrupt-server-ranges", NULL);
-	if (ireg) {
-		/*
-		 * set node starting index for this node
-		 */
-		indx = *ireg;
-	}
-
-	ireg = (uint *)get_property(np, "reg", &ilen);
-	if (!ireg)
-		panic("xics_init_IRQ: can't find interrupt reg property");
-
-	while (ilen) {
-		intnodes[indx].addr = (unsigned long)*ireg++ << 32;
-		ilen -= sizeof(uint);
-		intnodes[indx].addr |= *ireg++;
-		ilen -= sizeof(uint);
-		intnodes[indx].size = (unsigned long)*ireg++ << 32;
-		ilen -= sizeof(uint);
-		intnodes[indx].size |= *ireg++;
-		ilen -= sizeof(uint);
-		indx++;
-		if (indx >= NR_CPUS) break;
-	}
-
-	np = of_find_node_by_type(np, "PowerPC-External-Interrupt-Presentation");
-	if ((indx < NR_CPUS) && np) goto nextnode;
-
-	/* Find the server numbers for the boot cpu. */
-	for (np = of_find_node_by_type(NULL, "cpu");
-	     np;
-	     np = of_find_node_by_type(np, "cpu")) {
-		ireg = (uint *)get_property(np, "reg", &ilen);
-		if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) {
-			ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s",
-						    &ilen);
-			i = ilen / sizeof(int);
-			if (ireg && i > 0) {
-				default_server = ireg[0];
-				default_distrib_server = ireg[i-1]; /* take last element */
-			}
-			ireg = (uint *)get_property(np,
-					"ibm,interrupt-server#-size", NULL);
-			if (ireg)
-				interrupt_server_size = *ireg;
-			break;
-		}
-	}
-	of_node_put(np);
-
-	intr_base = intnodes[0].addr;
-	intr_size = intnodes[0].size;
-
-	np = of_find_node_by_type(NULL, "interrupt-controller");
-	if (!np) {
-		printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
-		xics_irq_8259_cascade_real = -1;
-		xics_irq_8259_cascade = -1;
-	} else {
-		ireg = (uint *) get_property(np, "interrupts", NULL);
-		if (!ireg)
-			panic("xics_init_IRQ: can't find ISA interrupts property");
-
-		xics_irq_8259_cascade_real = *ireg;
-		xics_irq_8259_cascade
-			= virt_irq_create_mapping(xics_irq_8259_cascade_real);
-		i8259_init(0, 0);
-		of_node_put(np);
-	}
-
+void xics_cause_IPI(int cpu)
+{
 	if (firmware_has_feature(FW_FEATURE_LPAR))
-		ops = &pSeriesLP_ops;
-	else {
-#ifdef CONFIG_SMP
-		for_each_possible_cpu(i) {
-			int hard_id;
+		lpar_qirr_info(cpu, IPI_PRIORITY);
+	else
+		direct_qirr_info(cpu, IPI_PRIORITY);
+}
 
-			/* FIXME: Do this dynamically! --RR */
-			if (!cpu_present(i))
-				continue;
-
-			hard_id = get_hard_smp_processor_id(i);
-			xics_per_cpu[i] = ioremap(intnodes[hard_id].addr,
-						  intnodes[hard_id].size);
-		}
-#else
-		xics_per_cpu[0] = ioremap(intr_base, intr_size);
 #endif /* CONFIG_SMP */
-	}
 
-	for (i = irq_offset_value(); i < NR_IRQS; ++i)
-		get_irq_desc(i)->chip = &xics_pic;
-
-	xics_setup_cpu();
-
-	ppc64_boot_msg(0x21, "XICS Done");
-}
-
-/*
- * We cant do this in init_IRQ because we need the memory subsystem up for
- * request_irq()
- */
-static int __init xics_setup_i8259(void)
+static void xics_set_cpu_priority(int cpu, unsigned char cppr)
 {
-	if (ppc64_interrupt_controller == IC_PPC_XIC &&
-	    xics_irq_8259_cascade != -1) {
-		if (request_irq(irq_offset_up(xics_irq_8259_cascade),
-				no_action, 0, "8259 cascade", NULL))
-			printk(KERN_ERR "xics_setup_i8259: couldn't get 8259 "
-					"cascade\n");
-	}
-	return 0;
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		lpar_cppr_info(cpu, cppr);
+	else
+		direct_cppr_info(cpu, cppr);
+	iosync();
 }
-arch_initcall(xics_setup_i8259);
-
-#ifdef CONFIG_SMP
-void xics_request_IPIs(void)
-{
-	virt_irq_to_real_map[XICS_IPI] = XICS_IPI;
-
-	/*
-	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	request_irq(irq_offset_up(XICS_IPI), xics_ipi_action,
-		    IRQF_DISABLED, "IPI", NULL);
-	get_irq_desc(irq_offset_up(XICS_IPI))->status |= IRQ_PER_CPU;
-}
-#endif
 
 static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
 {
@@ -604,8 +422,8 @@
 	unsigned long newmask;
 	cpumask_t tmp = CPU_MASK_NONE;
 
-	irq = virt_irq_to_real(irq_offset_down(virq));
-	if (irq == XICS_IPI || irq == NO_IRQ)
+	irq = (unsigned int)irq_map[virq].hwirq;
+	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
 	status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
@@ -636,15 +454,333 @@
 	}
 }
 
-void xics_teardown_cpu(int secondary)
+void xics_setup_cpu(void)
 {
 	int cpu = smp_processor_id();
 
-	ops->cppr_info(cpu, 0x00);
-	iosync();
+	xics_set_cpu_priority(cpu, 0xff);
 
-	/* Clear IPI */
-	ops->qirr_info(cpu, 0xff);
+	/*
+	 * Put the calling processor into the GIQ.  This is really only
+	 * necessary from a secondary thread as the OF start-cpu interface
+	 * performs this function for us on primary threads.
+	 *
+	 * XXX: undo of teardown on kexec needs this too, as may hotplug
+	 */
+	rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
+}
+
+
+static struct irq_chip xics_pic_direct = {
+	.typename = " XICS     ",
+	.startup = xics_startup,
+	.mask = xics_mask_irq,
+	.unmask = xics_unmask_irq,
+	.eoi = xics_eoi_direct,
+	.set_affinity = xics_set_affinity
+};
+
+
+static struct irq_chip xics_pic_lpar = {
+	.typename = " XICS     ",
+	.startup = xics_startup,
+	.mask = xics_mask_irq,
+	.unmask = xics_unmask_irq,
+	.eoi = xics_eoi_lpar,
+	.set_affinity = xics_set_affinity
+};
+
+
+static int xics_host_match(struct irq_host *h, struct device_node *node)
+{
+	/* IBM machines have interrupt parents of various funky types for things
+	 * like vdevices, events, etc... The trick we use here is to match
+	 * everything here except the legacy 8259 which is compatible "chrp,iic"
+	 */
+	return !device_is_compatible(node, "chrp,iic");
+}
+
+static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
+				irq_hw_number_t hw, unsigned int flags)
+{
+	unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+
+	pr_debug("xics: map_direct virq %d, hwirq 0x%lx, flags: 0x%x\n",
+		 virq, hw, flags);
+
+	if (sense && sense != IRQ_TYPE_LEVEL_LOW)
+		printk(KERN_WARNING "xics: using unsupported sense 0x%x"
+		       " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
+	return 0;
+}
+
+static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
+			      irq_hw_number_t hw, unsigned int flags)
+{
+	unsigned int sense = flags & IRQ_TYPE_SENSE_MASK;
+
+	pr_debug("xics: map_lpar virq %d, hwirq 0x%lx, flags: 0x%x\n",
+		 virq, hw, flags);
+
+	if (sense && sense != IRQ_TYPE_LEVEL_LOW)
+		printk(KERN_WARNING "xics: using unsupported sense 0x%x"
+		       " for irq %d (h: 0x%lx)\n", flags, virq, hw);
+
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
+	return 0;
+}
+
+static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
+			   u32 *intspec, unsigned int intsize,
+			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+	/* Current xics implementation translates everything
+	 * to level. It is not technically right for MSIs but this
+	 * is irrelevant at this point. We might get smarter in the future
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = IRQ_TYPE_LEVEL_LOW;
+
+	return 0;
+}
+
+static struct irq_host_ops xics_host_direct_ops = {
+	.match = xics_host_match,
+	.map = xics_host_map_direct,
+	.xlate = xics_host_xlate,
+};
+
+static struct irq_host_ops xics_host_lpar_ops = {
+	.match = xics_host_match,
+	.map = xics_host_map_lpar,
+	.xlate = xics_host_xlate,
+};
+
+static void __init xics_init_host(void)
+{
+	struct irq_host_ops *ops;
+
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		ops = &xics_host_lpar_ops;
+	else
+		ops = &xics_host_direct_ops;
+	xics_host = irq_alloc_host(IRQ_HOST_MAP_TREE, 0, ops,
+				   XICS_IRQ_SPURIOUS);
+	BUG_ON(xics_host == NULL);
+	irq_set_default_host(xics_host);
+}
+
+static void __init xics_map_one_cpu(int hw_id, unsigned long addr,
+				     unsigned long size)
+{
+#ifdef CONFIG_SMP
+	int i;
+
+	/* This may look gross but it's good enough for now, we don't quite
+	 * have a hard -> linux processor id matching.
+	 */
+	for_each_possible_cpu(i) {
+		if (!cpu_present(i))
+			continue;
+		if (hw_id == get_hard_smp_processor_id(i)) {
+			xics_per_cpu[i] = ioremap(addr, size);
+			return;
+		}
+	}
+#else
+	if (hw_id != 0)
+		return;
+	xics_per_cpu[0] = ioremap(addr, size);
+#endif /* CONFIG_SMP */
+}
+
+static void __init xics_init_one_node(struct device_node *np,
+				      unsigned int *indx)
+{
+	unsigned int ilen;
+	u32 *ireg;
+
+	/* This code does the theorically broken assumption that the interrupt
+	 * server numbers are the same as the hard CPU numbers.
+	 * This happens to be the case so far but we are playing with fire...
+	 * should be fixed one of these days. -BenH.
+	 */
+	ireg = (u32 *)get_property(np, "ibm,interrupt-server-ranges", NULL);
+
+	/* Do that ever happen ? we'll know soon enough... but even good'old
+	 * f80 does have that property ..
+	 */
+	WARN_ON(ireg == NULL);
+	if (ireg) {
+		/*
+		 * set node starting index for this node
+		 */
+		*indx = *ireg;
+	}
+	ireg = (u32 *)get_property(np, "reg", &ilen);
+	if (!ireg)
+		panic("xics_init_IRQ: can't find interrupt reg property");
+
+	while (ilen >= (4 * sizeof(u32))) {
+		unsigned long addr, size;
+
+		/* XXX Use proper OF parsing code here !!! */
+		addr = (unsigned long)*ireg++ << 32;
+		ilen -= sizeof(u32);
+		addr |= *ireg++;
+		ilen -= sizeof(u32);
+		size = (unsigned long)*ireg++ << 32;
+		ilen -= sizeof(u32);
+		size |= *ireg++;
+		ilen -= sizeof(u32);
+		xics_map_one_cpu(*indx, addr, size);
+		(*indx)++;
+	}
+}
+
+
+static void __init xics_setup_8259_cascade(void)
+{
+	struct device_node *np, *old, *found = NULL;
+	int cascade, naddr;
+	u32 *addrp;
+	unsigned long intack = 0;
+
+	for_each_node_by_type(np, "interrupt-controller")
+		if (device_is_compatible(np, "chrp,iic")) {
+			found = np;
+			break;
+		}
+	if (found == NULL) {
+		printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
+		return;
+	}
+	cascade = irq_of_parse_and_map(found, 0);
+	if (cascade == NO_IRQ) {
+		printk(KERN_ERR "xics: failed to map cascade interrupt");
+		return;
+	}
+	pr_debug("xics: cascade mapped to irq %d\n", cascade);
+
+	for (old = of_node_get(found); old != NULL ; old = np) {
+		np = of_get_parent(old);
+		of_node_put(old);
+		if (np == NULL)
+			break;
+		if (strcmp(np->name, "pci") != 0)
+			continue;
+		addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge", NULL);
+		if (addrp == NULL)
+			continue;
+		naddr = prom_n_addr_cells(np);
+		intack = addrp[naddr-1];
+		if (naddr > 1)
+			intack |= ((unsigned long)addrp[naddr-2]) << 32;
+	}
+	if (intack)
+		printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
+	i8259_init(found, intack);
+	of_node_put(found);
+	set_irq_chained_handler(cascade, pseries_8259_cascade);
+}
+
+void __init xics_init_IRQ(void)
+{
+	int i;
+	struct device_node *np;
+	u32 *ireg, ilen, indx = 0;
+	int found = 0;
+
+	ppc64_boot_msg(0x20, "XICS Init");
+
+	ibm_get_xive = rtas_token("ibm,get-xive");
+	ibm_set_xive = rtas_token("ibm,set-xive");
+	ibm_int_on  = rtas_token("ibm,int-on");
+	ibm_int_off = rtas_token("ibm,int-off");
+
+	for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") {
+		found = 1;
+		if (firmware_has_feature(FW_FEATURE_LPAR))
+			break;
+		xics_init_one_node(np, &indx);
+	}
+	if (found == 0)
+		return;
+
+	xics_init_host();
+
+	/* Find the server numbers for the boot cpu. */
+	for (np = of_find_node_by_type(NULL, "cpu");
+	     np;
+	     np = of_find_node_by_type(np, "cpu")) {
+		ireg = (u32 *)get_property(np, "reg", &ilen);
+		if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) {
+			ireg = (u32 *)get_property(np,
+						  "ibm,ppc-interrupt-gserver#s",
+						   &ilen);
+			i = ilen / sizeof(int);
+			if (ireg && i > 0) {
+				default_server = ireg[0];
+				/* take last element */
+				default_distrib_server = ireg[i-1];
+			}
+			ireg = (u32 *)get_property(np,
+					"ibm,interrupt-server#-size", NULL);
+			if (ireg)
+				interrupt_server_size = *ireg;
+			break;
+		}
+	}
+	of_node_put(np);
+
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		ppc_md.get_irq = xics_get_irq_lpar;
+	else
+		ppc_md.get_irq = xics_get_irq_direct;
+
+	xics_setup_cpu();
+
+	xics_setup_8259_cascade();
+
+	ppc64_boot_msg(0x21, "XICS Done");
+}
+
+
+#ifdef CONFIG_SMP
+void xics_request_IPIs(void)
+{
+	unsigned int ipi;
+
+	ipi = irq_create_mapping(xics_host, XICS_IPI, 0);
+	BUG_ON(ipi == NO_IRQ);
+
+	/*
+	 * IPIs are marked IRQF_DISABLED as they must run with irqs
+	 * disabled
+	 */
+	set_irq_handler(ipi, handle_percpu_irq);
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED,
+			    "IPI", NULL);
+	else
+		request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED,
+			    "IPI", NULL);
+}
+#endif /* CONFIG_SMP */
+
+void xics_teardown_cpu(int secondary)
+{
+	int cpu = smp_processor_id();
+	unsigned int ipi;
+	struct irq_desc *desc;
+
+	xics_set_cpu_priority(cpu, 0);
 
 	/*
 	 * we need to EOI the IPI if we got here from kexec down IPI
@@ -653,7 +789,13 @@
 	 * should we be flagging idle loop instead?
 	 * or creating some task to be scheduled?
 	 */
-	ops->xirr_info_set(cpu, XICS_IPI);
+
+	ipi = irq_find_mapping(xics_host, XICS_IPI);
+	if (ipi == XICS_IRQ_SPURIOUS)
+		return;
+	desc = get_irq_desc(ipi);
+	if (desc->chip && desc->chip->eoi)
+		desc->chip->eoi(XICS_IPI);
 
 	/*
 	 * Some machines need to have at least one cpu in the GIQ,
@@ -661,8 +803,8 @@
 	 */
 	if (secondary)
 		rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
-			(1UL << interrupt_server_size) - 1 -
-			default_distrib_server, 0);
+				   (1UL << interrupt_server_size) - 1 -
+				   default_distrib_server, 0);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -674,8 +816,7 @@
 	unsigned int irq, virq, cpu = smp_processor_id();
 
 	/* Reject any interrupt that was queued to us... */
-	ops->cppr_info(cpu, 0);
-	iosync();
+	xics_set_cpu_priority(cpu, 0);
 
 	/* remove ourselves from the global interrupt queue */
 	status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
@@ -683,24 +824,23 @@
 	WARN_ON(status < 0);
 
 	/* Allow IPIs again... */
-	ops->cppr_info(cpu, DEFAULT_PRIORITY);
-	iosync();
+	xics_set_cpu_priority(cpu, DEFAULT_PRIORITY);
 
 	for_each_irq(virq) {
-		irq_desc_t *desc;
+		struct irq_desc *desc;
 		int xics_status[2];
 		unsigned long flags;
 
 		/* We cant set affinity on ISA interrupts */
-		if (virq < irq_offset_value())
+		if (virq < NUM_ISA_INTERRUPTS)
 			continue;
-
-		desc = get_irq_desc(virq);
-		irq = virt_irq_to_real(irq_offset_down(virq));
-
+		if (irq_map[virq].host != xics_host)
+			continue;
+		irq = (unsigned int)irq_map[virq].hwirq;
 		/* We need to get IPIs still. */
-		if (irq == XICS_IPI || irq == NO_IRQ)
+		if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 			continue;
+		desc = get_irq_desc(virq);
 
 		/* We only need to migrate enabled IRQS */
 		if (desc == NULL || desc->chip == NULL
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index e14c708..6ee1055 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -14,13 +14,12 @@
 
 #include <linux/cache.h>
 
-void xics_init_IRQ(void);
-int xics_get_irq(struct pt_regs *);
-void xics_setup_cpu(void);
-void xics_teardown_cpu(int secondary);
-void xics_cause_IPI(int cpu);
-void xics_request_IPIs(void);
-void xics_migrate_irqs_away(void);
+extern void xics_init_IRQ(void);
+extern void xics_setup_cpu(void);
+extern void xics_teardown_cpu(int secondary);
+extern void xics_cause_IPI(int cpu);
+extern  void xics_request_IPIs(void);
+extern void xics_migrate_irqs_away(void);
 
 /* first argument is ignored for now*/
 void pSeriesLP_cppr_info(int n_cpu, u8 value);
@@ -31,4 +30,8 @@
 
 extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
 
+struct irq_desc;
+extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc,
+				 struct pt_regs *regs);
+
 #endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 054bd8b..cebfae2 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,7 +4,6 @@
 
 obj-$(CONFIG_MPIC)		+= mpic.o
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
-obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_BOOKE)		+= dcr.o
 obj-$(CONFIG_40x)		+= dcr.o
@@ -14,3 +13,7 @@
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_PPC_TODC)		+= todc.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+obj-$(CONFIG_PPC_I8259)		+= i8259.o
+ endif
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 1a3ef1a..72c73a6 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -6,11 +6,16 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#undef DEBUG
+
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
 #include <asm/io.h>
 #include <asm/i8259.h>
+#include <asm/prom.h>
 
 static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
 
@@ -20,7 +25,8 @@
 
 static DEFINE_SPINLOCK(i8259_lock);
 
-static int i8259_pic_irq_offset;
+static struct device_node *i8259_node;
+static struct irq_host *i8259_host;
 
 /*
  * Acknowledge the IRQ using either the PCI host bridge's interrupt
@@ -28,16 +34,18 @@
  * which is called.  It should be noted that polling is broken on some
  * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
  */
-int i8259_irq(struct pt_regs *regs)
+unsigned int i8259_irq(struct pt_regs *regs)
 {
 	int irq;
-
-	spin_lock(&i8259_lock);
+	int lock = 0;
 
 	/* Either int-ack or poll for the IRQ */
 	if (pci_intack)
 		irq = readb(pci_intack);
 	else {
+		spin_lock(&i8259_lock);
+		lock = 1;
+
 		/* Perform an interrupt acknowledge cycle on controller 1. */
 		outb(0x0C, 0x20);		/* prepare for poll */
 		irq = inb(0x20) & 7;
@@ -62,16 +70,13 @@
 		if (!pci_intack)
 			outb(0x0B, 0x20);	/* ISR register */
 		if(~inb(0x20) & 0x80)
-			irq = -1;
-	}
+			irq = NO_IRQ;
+	} else if (irq == 0xff)
+		irq = NO_IRQ;
 
-	spin_unlock(&i8259_lock);
-	return irq + i8259_pic_irq_offset;
-}
-
-int i8259_irq_cascade(struct pt_regs *regs, void *unused)
-{
-	return i8259_irq(regs);
+	if (lock)
+		spin_unlock(&i8259_lock);
+	return irq;
 }
 
 static void i8259_mask_and_ack_irq(unsigned int irq_nr)
@@ -79,7 +84,6 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
 	if (irq_nr > 7) {
 		cached_A1 |= 1 << (irq_nr-8);
 		inb(0xA1); 	/* DUMMY */
@@ -105,8 +109,9 @@
 {
 	unsigned long flags;
 
+	pr_debug("i8259_mask_irq(%d)\n", irq_nr);
+
 	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
 	if (irq_nr < 8)
 		cached_21 |= 1 << irq_nr;
 	else
@@ -119,8 +124,9 @@
 {
 	unsigned long flags;
 
+	pr_debug("i8259_unmask_irq(%d)\n", irq_nr);
+
 	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
 	if (irq_nr < 8)
 		cached_21 &= ~(1 << irq_nr);
 	else
@@ -129,19 +135,11 @@
 	spin_unlock_irqrestore(&i8259_lock, flags);
 }
 
-static void i8259_end_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq].action)
-		i8259_unmask_irq(irq);
-}
-
-struct hw_interrupt_type i8259_pic = {
-	.typename = " i8259    ",
-	.enable = i8259_unmask_irq,
-	.disable = i8259_mask_irq,
-	.ack = i8259_mask_and_ack_irq,
-	.end = i8259_end_irq,
+static struct irq_chip i8259_pic = {
+	.typename	= " i8259    ",
+	.mask		= i8259_mask_irq,
+	.unmask		= i8259_unmask_irq,
+	.mask_ack	= i8259_mask_and_ack_irq,
 };
 
 static struct resource pic1_iores = {
@@ -165,25 +163,84 @@
 	.flags = IORESOURCE_BUSY,
 };
 
-static struct irqaction i8259_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "82c59 secondary cascade",
+static int i8259_host_match(struct irq_host *h, struct device_node *node)
+{
+	return i8259_node == NULL || i8259_node == node;
+}
+
+static int i8259_host_map(struct irq_host *h, unsigned int virq,
+			  irq_hw_number_t hw, unsigned int flags)
+{
+	pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw);
+
+	/* We block the internal cascade */
+	if (hw == 2)
+		get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+
+	/* We use the level stuff only for now, we might want to
+	 * be more cautious here but that works for now
+	 */
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq);
+	return 0;
+}
+
+static void i8259_host_unmap(struct irq_host *h, unsigned int virq)
+{
+	/* Make sure irq is masked in hardware */
+	i8259_mask_irq(virq);
+
+	/* remove chip and handler */
+	set_irq_chip_and_handler(virq, NULL, NULL);
+
+	/* Make sure it's completed */
+	synchronize_irq(virq);
+}
+
+static int i8259_host_xlate(struct irq_host *h, struct device_node *ct,
+			    u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+	static unsigned char map_isa_senses[4] = {
+		IRQ_TYPE_LEVEL_LOW,
+		IRQ_TYPE_LEVEL_HIGH,
+		IRQ_TYPE_EDGE_FALLING,
+		IRQ_TYPE_EDGE_RISING,
+	};
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1 && intspec[1] < 4)
+		*out_flags = map_isa_senses[intspec[1]];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+
+	return 0;
+}
+
+static struct irq_host_ops i8259_host_ops = {
+	.match = i8259_host_match,
+	.map = i8259_host_map,
+	.unmap = i8259_host_unmap,
+	.xlate = i8259_host_xlate,
 };
 
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- *               the active irq from the 8259
+/****
+ * i8259_init - Initialize the legacy controller
+ * @node: device node of the legacy PIC (can be NULL, but then, it will match
+ *        all interrupts, so beware)
+ * @intack_addr: PCI interrupt acknowledge (real) address which will return
+ *             	 the active irq from the 8259
  */
-void __init i8259_init(unsigned long intack_addr, int offset)
+void i8259_init(struct device_node *node, unsigned long intack_addr)
 {
 	unsigned long flags;
-	int i;
 
+	/* initialize the controller */
 	spin_lock_irqsave(&i8259_lock, flags);
-	i8259_pic_irq_offset = offset;
+
+	/* Mask all first */
+	outb(0xff, 0xA1);
+	outb(0xff, 0x21);
 
 	/* init master interrupt controller */
 	outb(0x11, 0x20); /* Start init sequence */
@@ -197,21 +254,36 @@
 	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
 	outb(0x01, 0xA1); /* Select 8086 mode */
 
+	/* That thing is slow */
+	udelay(100);
+
 	/* always read ISR */
 	outb(0x0B, 0x20);
 	outb(0x0B, 0xA0);
 
-	/* Mask all interrupts */
+	/* Unmask the internal cascade */
+	cached_21 &= ~(1 << 2);
+
+	/* Set interrupt masks */
 	outb(cached_A1, 0xA1);
 	outb(cached_21, 0x21);
 
 	spin_unlock_irqrestore(&i8259_lock, flags);
 
-	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i)
-		irq_desc[offset + i].chip = &i8259_pic;
+	/* create a legacy host */
+	if (node)
+		i8259_node = of_node_get(node);
+	i8259_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &i8259_host_ops, 0);
+	if (i8259_host == NULL) {
+		printk(KERN_ERR "i8259: failed to allocate irq host !\n");
+		return;
+	}
 
 	/* reserve our resources */
-	setup_irq(offset + 2, &i8259_irqaction);
+	/* XXX should we continue doing that ? it seems to cause problems
+	 * with further requesting of PCI IO resources for that range...
+	 * need to look into it.
+	 */
 	request_resource(&ioport_resource, &pic1_iores);
 	request_resource(&ioport_resource, &pic2_iores);
 	request_resource(&ioport_resource, &pic_edgectrl_iores);
@@ -219,4 +291,5 @@
 	if (intack_addr != 0)
 		pci_intack = ioremap(intack_addr, 1);
 
+	printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
 }
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 7e46935..7d31d7c 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -100,8 +100,8 @@
 
 	if (mpic->flags & MPIC_PRIMARY)
 		cpu = hard_smp_processor_id();
-
-	return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg);
+	return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,
+			  mpic->cpuregs[cpu], reg);
 }
 
 static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value)
@@ -340,27 +340,19 @@
 #endif /* CONFIG_MPIC_BROKEN_U3 */
 
 
+#define mpic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
+
 /* Find an mpic associated with a given linux interrupt */
 static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
 {
-	struct mpic *mpic = mpics;
+	unsigned int src = mpic_irq_to_hw(irq);
 
-	while(mpic) {
-		/* search IPIs first since they may override the main interrupts */
-		if (irq >= mpic->ipi_offset && irq < (mpic->ipi_offset + 4)) {
-			if (is_ipi)
-				*is_ipi = 1;
-			return mpic;
-		}
-		if (irq >= mpic->irq_offset &&
-		    irq < (mpic->irq_offset + mpic->irq_count)) {
-			if (is_ipi)
-				*is_ipi = 0;
-			return mpic;
-		}
-		mpic = mpic -> next;
-	}
-	return NULL;
+	if (irq < NUM_ISA_INTERRUPTS)
+		return NULL;
+	if (is_ipi)
+		*is_ipi = (src >= MPIC_VEC_IPI_0 && src <= MPIC_VEC_IPI_3);
+
+	return irq_desc[irq].chip_data;
 }
 
 /* Convert a cpu mask from logical to physical cpu numbers. */
@@ -378,14 +370,14 @@
 /* Get the mpic structure from the IPI number */
 static inline struct mpic * mpic_from_ipi(unsigned int ipi)
 {
-	return container_of(irq_desc[ipi].chip, struct mpic, hc_ipi);
+	return irq_desc[ipi].chip_data;
 }
 #endif
 
 /* Get the mpic structure from the irq number */
 static inline struct mpic * mpic_from_irq(unsigned int irq)
 {
-	return container_of(irq_desc[irq].chip, struct mpic, hc_irq);
+	return irq_desc[irq].chip_data;
 }
 
 /* Send an EOI */
@@ -398,9 +390,7 @@
 #ifdef CONFIG_SMP
 static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
 {
-	struct mpic *mpic = dev_id;
-
-	smp_message_recv(irq - mpic->ipi_offset, regs);
+	smp_message_recv(mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0, regs);
 	return IRQ_HANDLED;
 }
 #endif /* CONFIG_SMP */
@@ -410,11 +400,11 @@
  */
 
 
-static void mpic_enable_irq(unsigned int irq)
+static void mpic_unmask_irq(unsigned int irq)
 {
 	unsigned int loops = 100000;
 	struct mpic *mpic = mpic_from_irq(irq);
-	unsigned int src = irq - mpic->irq_offset;
+	unsigned int src = mpic_irq_to_hw(irq);
 
 	DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src);
 
@@ -429,39 +419,13 @@
 			break;
 		}
 	} while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);	
-
-#ifdef CONFIG_MPIC_BROKEN_U3
-	if (mpic->flags & MPIC_BROKEN_U3) {
-		unsigned int src = irq - mpic->irq_offset;
-		if (mpic_is_ht_interrupt(mpic, src) &&
-		    (irq_desc[irq].status & IRQ_LEVEL))
-			mpic_ht_end_irq(mpic, src);
-	}
-#endif /* CONFIG_MPIC_BROKEN_U3 */
 }
 
-static unsigned int mpic_startup_irq(unsigned int irq)
-{
-#ifdef CONFIG_MPIC_BROKEN_U3
-	struct mpic *mpic = mpic_from_irq(irq);
-	unsigned int src = irq - mpic->irq_offset;
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
-	mpic_enable_irq(irq);
-
-#ifdef CONFIG_MPIC_BROKEN_U3
-	if (mpic_is_ht_interrupt(mpic, src))
-		mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
-	return 0;
-}
-
-static void mpic_disable_irq(unsigned int irq)
+static void mpic_mask_irq(unsigned int irq)
 {
 	unsigned int loops = 100000;
 	struct mpic *mpic = mpic_from_irq(irq);
-	unsigned int src = irq - mpic->irq_offset;
+	unsigned int src = mpic_irq_to_hw(irq);
 
 	DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
 
@@ -478,20 +442,6 @@
 	} while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
 }
 
-static void mpic_shutdown_irq(unsigned int irq)
-{
-#ifdef CONFIG_MPIC_BROKEN_U3
-	struct mpic *mpic = mpic_from_irq(irq);
-	unsigned int src = irq - mpic->irq_offset;
-
-	if (mpic_is_ht_interrupt(mpic, src))
-		mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
-
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
-	mpic_disable_irq(irq);
-}
-
 static void mpic_end_irq(unsigned int irq)
 {
 	struct mpic *mpic = mpic_from_irq(irq);
@@ -504,30 +454,74 @@
 	 * latched another edge interrupt coming in anyway
 	 */
 
-#ifdef CONFIG_MPIC_BROKEN_U3
-	if (mpic->flags & MPIC_BROKEN_U3) {
-		unsigned int src = irq - mpic->irq_offset;
-		if (mpic_is_ht_interrupt(mpic, src) &&
-		    (irq_desc[irq].status & IRQ_LEVEL))
-			mpic_ht_end_irq(mpic, src);
-	}
-#endif /* CONFIG_MPIC_BROKEN_U3 */
-
 	mpic_eoi(mpic);
 }
 
+#ifdef CONFIG_MPIC_BROKEN_U3
+
+static void mpic_unmask_ht_irq(unsigned int irq)
+{
+	struct mpic *mpic = mpic_from_irq(irq);
+	unsigned int src = mpic_irq_to_hw(irq);
+
+	mpic_unmask_irq(irq);
+
+	if (irq_desc[irq].status & IRQ_LEVEL)
+		mpic_ht_end_irq(mpic, src);
+}
+
+static unsigned int mpic_startup_ht_irq(unsigned int irq)
+{
+	struct mpic *mpic = mpic_from_irq(irq);
+	unsigned int src = mpic_irq_to_hw(irq);
+
+	mpic_unmask_irq(irq);
+	mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
+
+	return 0;
+}
+
+static void mpic_shutdown_ht_irq(unsigned int irq)
+{
+	struct mpic *mpic = mpic_from_irq(irq);
+	unsigned int src = mpic_irq_to_hw(irq);
+
+	mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+	mpic_mask_irq(irq);
+}
+
+static void mpic_end_ht_irq(unsigned int irq)
+{
+	struct mpic *mpic = mpic_from_irq(irq);
+	unsigned int src = mpic_irq_to_hw(irq);
+
+#ifdef DEBUG_IRQ
+	DBG("%s: end_irq: %d\n", mpic->name, irq);
+#endif
+	/* We always EOI on end_irq() even for edge interrupts since that
+	 * should only lower the priority, the MPIC should have properly
+	 * latched another edge interrupt coming in anyway
+	 */
+
+	if (irq_desc[irq].status & IRQ_LEVEL)
+		mpic_ht_end_irq(mpic, src);
+	mpic_eoi(mpic);
+}
+
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
 #ifdef CONFIG_SMP
 
-static void mpic_enable_ipi(unsigned int irq)
+static void mpic_unmask_ipi(unsigned int irq)
 {
 	struct mpic *mpic = mpic_from_ipi(irq);
-	unsigned int src = irq - mpic->ipi_offset;
+	unsigned int src = mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0;
 
 	DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src);
 	mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK);
 }
 
-static void mpic_disable_ipi(unsigned int irq)
+static void mpic_mask_ipi(unsigned int irq)
 {
 	/* NEVER disable an IPI... that's just plain wrong! */
 }
@@ -551,29 +545,176 @@
 static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
 {
 	struct mpic *mpic = mpic_from_irq(irq);
+	unsigned int src = mpic_irq_to_hw(irq);
 
 	cpumask_t tmp;
 
 	cpus_and(tmp, cpumask, cpu_online_map);
 
-	mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_DESTINATION,
+	mpic_irq_write(src, MPIC_IRQ_DESTINATION,
 		       mpic_physmask(cpus_addr(tmp)[0]));	
 }
 
+static unsigned int mpic_flags_to_vecpri(unsigned int flags, int *level)
+{
+	unsigned int vecpri;
+
+	/* Now convert sense value */
+	switch(flags & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		vecpri = MPIC_VECPRI_SENSE_EDGE |
+			MPIC_VECPRI_POLARITY_POSITIVE;
+		*level = 0;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		vecpri = MPIC_VECPRI_SENSE_EDGE |
+			MPIC_VECPRI_POLARITY_NEGATIVE;
+		*level = 0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		vecpri = MPIC_VECPRI_SENSE_LEVEL |
+			MPIC_VECPRI_POLARITY_POSITIVE;
+		*level = 1;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+	default:
+		vecpri = MPIC_VECPRI_SENSE_LEVEL |
+			MPIC_VECPRI_POLARITY_NEGATIVE;
+		*level = 1;
+	}
+	return vecpri;
+}
+
+static struct irq_chip mpic_irq_chip = {
+	.mask	= mpic_mask_irq,
+	.unmask	= mpic_unmask_irq,
+	.eoi	= mpic_end_irq,
+};
+
+#ifdef CONFIG_SMP
+static struct irq_chip mpic_ipi_chip = {
+	.mask	= mpic_mask_ipi,
+	.unmask	= mpic_unmask_ipi,
+	.eoi	= mpic_end_ipi,
+};
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+static struct irq_chip mpic_irq_ht_chip = {
+	.startup	= mpic_startup_ht_irq,
+	.shutdown	= mpic_shutdown_ht_irq,
+	.mask		= mpic_mask_irq,
+	.unmask		= mpic_unmask_ht_irq,
+	.eoi		= mpic_end_ht_irq,
+};
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+
+static int mpic_host_match(struct irq_host *h, struct device_node *node)
+{
+	struct mpic *mpic = h->host_data;
+
+	/* Exact match, unless mpic node is NULL */
+	return mpic->of_node == NULL || mpic->of_node == node;
+}
+
+static int mpic_host_map(struct irq_host *h, unsigned int virq,
+			 irq_hw_number_t hw, unsigned int flags)
+{
+	struct irq_desc *desc = get_irq_desc(virq);
+	struct irq_chip *chip;
+	struct mpic *mpic = h->host_data;
+	unsigned int vecpri = MPIC_VECPRI_SENSE_LEVEL |
+		MPIC_VECPRI_POLARITY_NEGATIVE;
+	int level;
+
+	pr_debug("mpic: map virq %d, hwirq 0x%lx, flags: 0x%x\n",
+		 virq, hw, flags);
+
+	if (hw == MPIC_VEC_SPURRIOUS)
+		return -EINVAL;
+#ifdef CONFIG_SMP
+	else if (hw >= MPIC_VEC_IPI_0) {
+		WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+
+		pr_debug("mpic: mapping as IPI\n");
+		set_irq_chip_data(virq, mpic);
+		set_irq_chip_and_handler(virq, &mpic->hc_ipi,
+					 handle_percpu_irq);
+		return 0;
+	}
+#endif /* CONFIG_SMP */
+
+	if (hw >= mpic->irq_count)
+		return -EINVAL;
+
+	/* If no sense provided, check default sense array */
+	if (((flags & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_NONE) &&
+	    mpic->senses && hw < mpic->senses_count)
+		flags |= mpic->senses[hw];
+
+	vecpri = mpic_flags_to_vecpri(flags, &level);
+	if (level)
+		desc->status |= IRQ_LEVEL;
+	chip = &mpic->hc_irq;
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+	/* Check for HT interrupts, override vecpri */
+	if (mpic_is_ht_interrupt(mpic, hw)) {
+		vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
+			    MPIC_VECPRI_POLARITY_MASK);
+		vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+		chip = &mpic->hc_ht_irq;
+	}
+#endif
+
+	/* Reconfigure irq */
+	vecpri |= MPIC_VECPRI_MASK | hw | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
+	mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri);
+
+	pr_debug("mpic: mapping as IRQ\n");
+
+	set_irq_chip_data(virq, mpic);
+	set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq);
+	return 0;
+}
+
+static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
+			   u32 *intspec, unsigned int intsize,
+			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+
+{
+	static unsigned char map_mpic_senses[4] = {
+		IRQ_TYPE_EDGE_RISING,
+		IRQ_TYPE_LEVEL_LOW,
+		IRQ_TYPE_LEVEL_HIGH,
+		IRQ_TYPE_EDGE_FALLING,
+	};
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1 && intspec[1] < 4)
+		*out_flags = map_mpic_senses[intspec[1]];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+
+	return 0;
+}
+
+static struct irq_host_ops mpic_host_ops = {
+	.match = mpic_host_match,
+	.map = mpic_host_map,
+	.xlate = mpic_host_xlate,
+};
 
 /*
  * Exported functions
  */
 
-
-struct mpic * __init mpic_alloc(unsigned long phys_addr,
+struct mpic * __init mpic_alloc(struct device_node *node,
+				unsigned long phys_addr,
 				unsigned int flags,
 				unsigned int isu_size,
-				unsigned int irq_offset,
 				unsigned int irq_count,
-				unsigned int ipi_offset,
-				unsigned char *senses,
-				unsigned int senses_count,
 				const char *name)
 {
 	struct mpic	*mpic;
@@ -585,33 +726,38 @@
 	if (mpic == NULL)
 		return NULL;
 	
-
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
+	mpic->of_node = node ? of_node_get(node) : NULL;
 
+	mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 256,
+				       &mpic_host_ops,
+				       MPIC_VEC_SPURRIOUS);
+	if (mpic->irqhost == NULL) {
+		of_node_put(node);
+		return NULL;
+	}
+
+	mpic->irqhost->host_data = mpic;
+	mpic->hc_irq = mpic_irq_chip;
 	mpic->hc_irq.typename = name;
-	mpic->hc_irq.startup = mpic_startup_irq;
-	mpic->hc_irq.shutdown = mpic_shutdown_irq;
-	mpic->hc_irq.enable = mpic_enable_irq;
-	mpic->hc_irq.disable = mpic_disable_irq;
-	mpic->hc_irq.end = mpic_end_irq;
 	if (flags & MPIC_PRIMARY)
 		mpic->hc_irq.set_affinity = mpic_set_affinity;
+#ifdef CONFIG_MPIC_BROKEN_U3
+	mpic->hc_ht_irq = mpic_irq_ht_chip;
+	mpic->hc_ht_irq.typename = name;
+	if (flags & MPIC_PRIMARY)
+		mpic->hc_ht_irq.set_affinity = mpic_set_affinity;
+#endif /* CONFIG_MPIC_BROKEN_U3 */
 #ifdef CONFIG_SMP
+	mpic->hc_ipi = mpic_ipi_chip;
 	mpic->hc_ipi.typename = name;
-	mpic->hc_ipi.enable = mpic_enable_ipi;
-	mpic->hc_ipi.disable = mpic_disable_ipi;
-	mpic->hc_ipi.end = mpic_end_ipi;
 #endif /* CONFIG_SMP */
 
 	mpic->flags = flags;
 	mpic->isu_size = isu_size;
-	mpic->irq_offset = irq_offset;
 	mpic->irq_count = irq_count;
-	mpic->ipi_offset = ipi_offset;
 	mpic->num_sources = 0; /* so far */
-	mpic->senses = senses;
-	mpic->senses_count = senses_count;
 
 	/* Map the global registers */
 	mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
@@ -679,8 +825,10 @@
 	mpic->next = mpics;
 	mpics = mpic;
 
-	if (flags & MPIC_PRIMARY)
+	if (flags & MPIC_PRIMARY) {
 		mpic_primary = mpic;
+		irq_set_default_host(mpic->irqhost);
+	}
 
 	return mpic;
 }
@@ -697,26 +845,10 @@
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
 
-void __init mpic_setup_cascade(unsigned int irq, mpic_cascade_t handler,
-			       void *data)
+void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
 {
-	struct mpic *mpic = mpic_find(irq, NULL);
-	unsigned long flags;
-
-	/* Synchronization here is a bit dodgy, so don't try to replace cascade
-	 * interrupts on the fly too often ... but normally it's set up at boot.
-	 */
-	spin_lock_irqsave(&mpic_lock, flags);
-	if (mpic->cascade)	       
-		mpic_disable_irq(mpic->cascade_vec + mpic->irq_offset);
-	mpic->cascade = NULL;
-	wmb();
-	mpic->cascade_vec = irq - mpic->irq_offset;
-	mpic->cascade_data = data;
-	wmb();
-	mpic->cascade = handler;
-	mpic_enable_irq(irq);
-	spin_unlock_irqrestore(&mpic_lock, flags);
+	mpic->senses = senses;
+	mpic->senses_count = count;
 }
 
 void __init mpic_init(struct mpic *mpic)
@@ -724,6 +856,11 @@
 	int i;
 
 	BUG_ON(mpic->num_sources == 0);
+	WARN_ON(mpic->num_sources > MPIC_VEC_IPI_0);
+
+	/* Sanitize source count */
+	if (mpic->num_sources > MPIC_VEC_IPI_0)
+		mpic->num_sources = MPIC_VEC_IPI_0;
 
 	printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
 
@@ -747,12 +884,6 @@
 			       MPIC_VECPRI_MASK |
 			       (10 << MPIC_VECPRI_PRIORITY_SHIFT) |
 			       (MPIC_VEC_IPI_0 + i));
-#ifdef CONFIG_SMP
-		if (!(mpic->flags & MPIC_PRIMARY))
-			continue;
-		irq_desc[mpic->ipi_offset+i].status |= IRQ_PER_CPU;
-		irq_desc[mpic->ipi_offset+i].chip = &mpic->hc_ipi;
-#endif /* CONFIG_SMP */
 	}
 
 	/* Initialize interrupt sources */
@@ -763,31 +894,21 @@
 	/* Do the HT PIC fixups on U3 broken mpic */
 	DBG("MPIC flags: %x\n", mpic->flags);
 	if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
-		mpic_scan_ht_pics(mpic);
+ 		mpic_scan_ht_pics(mpic);
 #endif /* CONFIG_MPIC_BROKEN_U3 */
 
 	for (i = 0; i < mpic->num_sources; i++) {
 		/* start with vector = source number, and masked */
 		u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
-		int level = 0;
+		int level = 1;
 		
-		/* if it's an IPI, we skip it */
-		if ((mpic->irq_offset + i) >= (mpic->ipi_offset + i) &&
-		    (mpic->irq_offset + i) <  (mpic->ipi_offset + i + 4))
-			continue;
-
 		/* do senses munging */
-		if (mpic->senses && i < mpic->senses_count) {
-			if (mpic->senses[i] & IRQ_SENSE_LEVEL)
-				vecpri |= MPIC_VECPRI_SENSE_LEVEL;
-			if (mpic->senses[i] & IRQ_POLARITY_POSITIVE)
-				vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
-		} else
+		if (mpic->senses && i < mpic->senses_count)
+			vecpri = mpic_flags_to_vecpri(mpic->senses[i],
+						      &level);
+		else
 			vecpri |= MPIC_VECPRI_SENSE_LEVEL;
 
-		/* remember if it was a level interrupts */
-		level = (vecpri & MPIC_VECPRI_SENSE_LEVEL);
-
 		/* deal with broken U3 */
 		if (mpic->flags & MPIC_BROKEN_U3) {
 #ifdef CONFIG_MPIC_BROKEN_U3
@@ -808,12 +929,6 @@
 		mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
 		mpic_irq_write(i, MPIC_IRQ_DESTINATION,
 			       1 << hard_smp_processor_id());
-
-		/* init linux descriptors */
-		if (i < mpic->irq_count) {
-			irq_desc[mpic->irq_offset+i].status = level ? IRQ_LEVEL : 0;
-			irq_desc[mpic->irq_offset+i].chip = &mpic->hc_irq;
-		}
 	}
 	
 	/* Init spurrious vector */
@@ -854,19 +969,20 @@
 {
 	int is_ipi;
 	struct mpic *mpic = mpic_find(irq, &is_ipi);
+	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
 	u32 reg;
 
 	spin_lock_irqsave(&mpic_lock, flags);
 	if (is_ipi) {
-		reg = mpic_ipi_read(irq - mpic->ipi_offset) &
+		reg = mpic_ipi_read(src - MPIC_VEC_IPI_0) &
 			~MPIC_VECPRI_PRIORITY_MASK;
-		mpic_ipi_write(irq - mpic->ipi_offset,
+		mpic_ipi_write(src - MPIC_VEC_IPI_0,
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	} else {
-		reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI)
+		reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI)
 			& ~MPIC_VECPRI_PRIORITY_MASK;
-		mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI,
+		mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
 	}
 	spin_unlock_irqrestore(&mpic_lock, flags);
@@ -876,14 +992,15 @@
 {
 	int is_ipi;
 	struct mpic *mpic = mpic_find(irq, &is_ipi);
+	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
 	u32 reg;
 
 	spin_lock_irqsave(&mpic_lock, flags);
 	if (is_ipi)
-		reg = mpic_ipi_read(irq - mpic->ipi_offset);
+		reg = mpic_ipi_read(src = MPIC_VEC_IPI_0);
 	else
-		reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI);
+		reg = mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI);
 	spin_unlock_irqrestore(&mpic_lock, flags);
 	return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
 }
@@ -978,37 +1095,20 @@
 		       mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
 }
 
-int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
+unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
 {
-	u32 irq;
+	u32 src;
 
-	irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+	src = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
 #ifdef DEBUG_LOW
-	DBG("%s: get_one_irq(): %d\n", mpic->name, irq);
+	DBG("%s: get_one_irq(): %d\n", mpic->name, src);
 #endif
-	if (mpic->cascade && irq == mpic->cascade_vec) {
-#ifdef DEBUG_LOW
-		DBG("%s: cascading ...\n", mpic->name);
-#endif
-		irq = mpic->cascade(regs, mpic->cascade_data);
-		mpic_eoi(mpic);
-		return irq;
-	}
-	if (unlikely(irq == MPIC_VEC_SPURRIOUS))
-		return -1;
-	if (irq < MPIC_VEC_IPI_0) {
-#ifdef DEBUG_IRQ
-		DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset);
-#endif
-		return irq + mpic->irq_offset;
-	}
-#ifdef DEBUG_IPI
-       	DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0);
-#endif
-	return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset;
+	if (unlikely(src == MPIC_VEC_SPURRIOUS))
+		return NO_IRQ;
+	return irq_linear_revmap(mpic->irqhost, src);
 }
 
-int mpic_get_irq(struct pt_regs *regs)
+unsigned int mpic_get_irq(struct pt_regs *regs)
 {
 	struct mpic *mpic = mpic_primary;
 
@@ -1022,25 +1122,27 @@
 void mpic_request_ipis(void)
 {
 	struct mpic *mpic = mpic_primary;
-
+	int i;
+	static char *ipi_names[] = {
+		"IPI0 (call function)",
+		"IPI1 (reschedule)",
+		"IPI2 (unused)",
+		"IPI3 (debugger break)",
+	};
 	BUG_ON(mpic == NULL);
-	
-	printk("requesting IPIs ... \n");
 
-	/*
-	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	request_irq(mpic->ipi_offset+0, mpic_ipi_action, IRQF_DISABLED,
-		    "IPI0 (call function)", mpic);
-	request_irq(mpic->ipi_offset+1, mpic_ipi_action, IRQF_DISABLED,
-		   "IPI1 (reschedule)", mpic);
-	request_irq(mpic->ipi_offset+2, mpic_ipi_action, IRQF_DISABLED,
-		   "IPI2 (unused)", mpic);
-	request_irq(mpic->ipi_offset+3, mpic_ipi_action, IRQF_DISABLED,
-		   "IPI3 (debugger break)", mpic);
+	printk(KERN_INFO "mpic: requesting IPIs ... \n");
 
-	printk("IPIs requested... \n");
+	for (i = 0; i < 4; i++) {
+		unsigned int vipi = irq_create_mapping(mpic->irqhost,
+						       MPIC_VEC_IPI_0 + i, 0);
+		if (vipi == NO_IRQ) {
+			printk(KERN_ERR "Failed to map IPI %d\n", i);
+			break;
+		}
+		request_irq(vipi, mpic_ipi_action, IRQF_DISABLED,
+			    ipi_names[i], mpic);
+	}
 }
 
 void smp_mpic_message_pass(int target, int msg)
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 490749c..2497bbc 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -104,3 +104,5 @@
 ifeq ($(CONFIG_PPC_MPC52xx),y)
 obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
 endif
+
+obj-$(CONFIG_PPC_I8259)		+= i8259.o
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
new file mode 100644
index 0000000..eb35353
--- /dev/null
+++ b/arch/ppc/syslib/i8259.c
@@ -0,0 +1,212 @@
+/*
+ * i8259 interrupt controller driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/i8259.h>
+
+static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
+
+static unsigned char cached_8259[2] = { 0xff, 0xff };
+#define cached_A1 (cached_8259[0])
+#define cached_21 (cached_8259[1])
+
+static DEFINE_SPINLOCK(i8259_lock);
+
+static int i8259_pic_irq_offset;
+
+/*
+ * Acknowledge the IRQ using either the PCI host bridge's interrupt
+ * acknowledge feature or poll.  How i8259_init() is called determines
+ * which is called.  It should be noted that polling is broken on some
+ * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
+ */
+int i8259_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	spin_lock(&i8259_lock);
+
+	/* Either int-ack or poll for the IRQ */
+	if (pci_intack)
+		irq = readb(pci_intack);
+	else {
+		/* Perform an interrupt acknowledge cycle on controller 1. */
+		outb(0x0C, 0x20);		/* prepare for poll */
+		irq = inb(0x20) & 7;
+		if (irq == 2 ) {
+			/*
+			 * Interrupt is cascaded so perform interrupt
+			 * acknowledge on controller 2.
+			 */
+			outb(0x0C, 0xA0);	/* prepare for poll */
+			irq = (inb(0xA0) & 7) + 8;
+		}
+	}
+
+	if (irq == 7) {
+		/*
+		 * This may be a spurious interrupt.
+		 *
+		 * Read the interrupt status register (ISR). If the most
+		 * significant bit is not set then there is no valid
+		 * interrupt.
+		 */
+		if (!pci_intack)
+			outb(0x0B, 0x20);	/* ISR register */
+		if(~inb(0x20) & 0x80)
+			irq = -1;
+	}
+
+	spin_unlock(&i8259_lock);
+	return irq + i8259_pic_irq_offset;
+}
+
+static void i8259_mask_and_ack_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	irq_nr -= i8259_pic_irq_offset;
+	if (irq_nr > 7) {
+		cached_A1 |= 1 << (irq_nr-8);
+		inb(0xA1); 	/* DUMMY */
+		outb(cached_A1, 0xA1);
+		outb(0x20, 0xA0);	/* Non-specific EOI */
+		outb(0x20, 0x20);	/* Non-specific EOI to cascade */
+	} else {
+		cached_21 |= 1 << irq_nr;
+		inb(0x21); 	/* DUMMY */
+		outb(cached_21, 0x21);
+		outb(0x20, 0x20);	/* Non-specific EOI */
+	}
+	spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_set_irq_mask(int irq_nr)
+{
+	outb(cached_A1,0xA1);
+	outb(cached_21,0x21);
+}
+
+static void i8259_mask_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	irq_nr -= i8259_pic_irq_offset;
+	if (irq_nr < 8)
+		cached_21 |= 1 << irq_nr;
+	else
+		cached_A1 |= 1 << (irq_nr-8);
+	i8259_set_irq_mask(irq_nr);
+	spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static void i8259_unmask_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	irq_nr -= i8259_pic_irq_offset;
+	if (irq_nr < 8)
+		cached_21 &= ~(1 << irq_nr);
+	else
+		cached_A1 &= ~(1 << (irq_nr-8));
+	i8259_set_irq_mask(irq_nr);
+	spin_unlock_irqrestore(&i8259_lock, flags);
+}
+
+static struct irq_chip i8259_pic = {
+	.typename	= " i8259    ",
+	.mask		= i8259_mask_irq,
+	.unmask		= i8259_unmask_irq,
+	.mask_ack	= i8259_mask_and_ack_irq,
+};
+
+static struct resource pic1_iores = {
+	.name = "8259 (master)",
+	.start = 0x20,
+	.end = 0x21,
+	.flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic2_iores = {
+	.name = "8259 (slave)",
+	.start = 0xa0,
+	.end = 0xa1,
+	.flags = IORESOURCE_BUSY,
+};
+
+static struct resource pic_edgectrl_iores = {
+	.name = "8259 edge control",
+	.start = 0x4d0,
+	.end = 0x4d1,
+	.flags = IORESOURCE_BUSY,
+};
+
+static struct irqaction i8259_irqaction = {
+	.handler = no_action,
+	.flags = SA_INTERRUPT,
+	.mask = CPU_MASK_NONE,
+	.name = "82c59 secondary cascade",
+};
+
+/*
+ * i8259_init()
+ * intack_addr - PCI interrupt acknowledge (real) address which will return
+ *               the active irq from the 8259
+ */
+void __init i8259_init(unsigned long intack_addr, int offset)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&i8259_lock, flags);
+	i8259_pic_irq_offset = offset;
+
+	/* init master interrupt controller */
+	outb(0x11, 0x20); /* Start init sequence */
+	outb(0x00, 0x21); /* Vector base */
+	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
+	outb(0x01, 0x21); /* Select 8086 mode */
+
+	/* init slave interrupt controller */
+	outb(0x11, 0xA0); /* Start init sequence */
+	outb(0x08, 0xA1); /* Vector base */
+	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
+	outb(0x01, 0xA1); /* Select 8086 mode */
+
+	/* always read ISR */
+	outb(0x0B, 0x20);
+	outb(0x0B, 0xA0);
+
+	/* Mask all interrupts */
+	outb(cached_A1, 0xA1);
+	outb(cached_21, 0x21);
+
+	spin_unlock_irqrestore(&i8259_lock, flags);
+
+	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
+		set_irq_chip_and_handler(offset + i, &i8259_pic,
+					 handle_level_irq);
+		irq_desc[offset + i].status |= IRQ_LEVEL;
+	}
+
+	/* reserve our resources */
+	setup_irq(offset + 2, &i8259_irqaction);
+	request_resource(&ioport_resource, &pic1_iores);
+	request_resource(&ioport_resource, &pic2_iores);
+	request_resource(&ioport_resource, &pic_edgectrl_iores);
+
+	if (intack_addr != 0)
+		pci_intack = ioremap(intack_addr, 1);
+
+}
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index 3721e12..cc42e76 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -250,8 +250,6 @@
 static int floppy_release(struct inode *inode, struct file *filp);
 static int floppy_check_change(struct gendisk *disk);
 static int floppy_revalidate(struct gendisk *disk);
-static int swim3_add_device(struct device_node *swims);
-int swim3_init(void);
 
 #ifndef CONFIG_PMAC_MEDIABAY
 #define check_media_bay(which, what)	1
@@ -1011,114 +1009,63 @@
 	.revalidate_disk= floppy_revalidate,
 };
 
-int swim3_init(void)
+static int swim3_add_device(struct macio_dev *mdev, int index)
 {
-	struct device_node *swim;
-	int err = -ENOMEM;
-	int i;
-
-	swim = find_devices("floppy");
-	while (swim && (floppy_count < MAX_FLOPPIES))
-	{
-		swim3_add_device(swim);
-		swim = swim->next;
-	}
-
-	swim = find_devices("swim3");
-	while (swim && (floppy_count < MAX_FLOPPIES))
-	{
-		swim3_add_device(swim);
-		swim = swim->next;
-	}
-
-	if (!floppy_count)
-		return -ENODEV;
-
-	for (i = 0; i < floppy_count; i++) {
-		disks[i] = alloc_disk(1);
-		if (!disks[i])
-			goto out;
-	}
-
-	if (register_blkdev(FLOPPY_MAJOR, "fd")) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
-	if (!swim3_queue) {
-		err = -ENOMEM;
-		goto out_queue;
-	}
-
-	for (i = 0; i < floppy_count; i++) {
-		struct gendisk *disk = disks[i];
-		disk->major = FLOPPY_MAJOR;
-		disk->first_minor = i;
-		disk->fops = &floppy_fops;
-		disk->private_data = &floppy_states[i];
-		disk->queue = swim3_queue;
-		disk->flags |= GENHD_FL_REMOVABLE;
-		sprintf(disk->disk_name, "fd%d", i);
-		set_capacity(disk, 2880);
-		add_disk(disk);
-	}
-	return 0;
-
-out_queue:
-	unregister_blkdev(FLOPPY_MAJOR, "fd");
-out:
-	while (i--)
-		put_disk(disks[i]);
-	/* shouldn't we do something with results of swim_add_device()? */
-	return err;
-}
-
-static int swim3_add_device(struct device_node *swim)
-{
+	struct device_node *swim = mdev->ofdev.node;
 	struct device_node *mediabay;
-	struct floppy_state *fs = &floppy_states[floppy_count];
-	struct resource res_reg, res_dma;
+	struct floppy_state *fs = &floppy_states[index];
+	int rc = -EBUSY;
 
-	if (of_address_to_resource(swim, 0, &res_reg) ||
-	    of_address_to_resource(swim, 1, &res_dma)) {
-		printk(KERN_ERR "swim3: Can't get addresses\n");
-		return -EINVAL;
+	/* Check & Request resources */
+	if (macio_resource_count(mdev) < 2) {
+		printk(KERN_WARNING "ifd%d: no address for %s\n",
+		       index, swim->full_name);
+		return -ENXIO;
 	}
-	if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1,
-			       " (reg)") == NULL) {
-		printk(KERN_ERR "swim3: Can't request register space\n");
-		return -EINVAL;
+	if (macio_irq_count(mdev) < 2) {
+		printk(KERN_WARNING "fd%d: no intrs for device %s\n",
+			index, swim->full_name);
 	}
-	if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1,
-			       " (dma)") == NULL) {
-		release_mem_region(res_reg.start,
-				   res_reg.end - res_reg.start + 1);
-		printk(KERN_ERR "swim3: Can't request DMA space\n");
-		return -EINVAL;
+	if (macio_request_resource(mdev, 0, "swim3 (mmio)")) {
+		printk(KERN_ERR "fd%d: can't request mmio resource for %s\n",
+		       index, swim->full_name);
+		return -EBUSY;
 	}
+	if (macio_request_resource(mdev, 1, "swim3 (dma)")) {
+		printk(KERN_ERR "fd%d: can't request dma resource for %s\n",
+		       index, swim->full_name);
+		macio_release_resource(mdev, 0);
+		return -EBUSY;
+	}
+	dev_set_drvdata(&mdev->ofdev.dev, fs);
 
-	if (swim->n_intrs < 2) {
-		printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n",
-		       swim->n_intrs);
-		release_mem_region(res_reg.start,
-				   res_reg.end - res_reg.start + 1);
-		release_mem_region(res_dma.start,
-				   res_dma.end - res_dma.start + 1);
-		return -EINVAL;
-	}
-
-	mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? swim->parent : NULL;
+	mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
+		swim->parent : NULL;
 	if (mediabay == NULL)
 		pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
 	
 	memset(fs, 0, sizeof(*fs));
 	spin_lock_init(&fs->lock);
 	fs->state = idle;
-	fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200);
-	fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200);
-	fs->swim3_intr = swim->intrs[0].line;
-	fs->dma_intr = swim->intrs[1].line;
+	fs->swim3 = (struct swim3 __iomem *)
+		ioremap(macio_resource_start(mdev, 0), 0x200);
+	if (fs->swim3 == NULL) {
+		printk("fd%d: couldn't map registers for %s\n",
+		       index, swim->full_name);
+		rc = -ENOMEM;
+		goto out_release;
+	}
+	fs->dma = (struct dbdma_regs __iomem *)
+		ioremap(macio_resource_start(mdev, 1), 0x200);
+	if (fs->dma == NULL) {
+		printk("fd%d: couldn't map DMA for %s\n",
+		       index, swim->full_name);
+		iounmap(fs->swim3);
+		rc = -ENOMEM;
+		goto out_release;
+	}
+	fs->swim3_intr = macio_irq(mdev, 0);
+	fs->dma_intr = macio_irq(mdev, 1);;
 	fs->cur_cyl = -1;
 	fs->cur_sector = -1;
 	fs->secpercyl = 36;
@@ -1132,15 +1079,16 @@
 	st_le16(&fs->dma_cmd[1].command, DBDMA_STOP);
 
 	if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) {
-		printk(KERN_ERR "Couldn't get irq %d for SWIM3\n", fs->swim3_intr);
+		printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n",
+		       index, fs->swim3_intr, swim->full_name);
 		pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
+		goto out_unmap;
 		return -EBUSY;
 	}
 /*
 	if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
 		printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
 		       fs->dma_intr);
-		pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
 		return -EBUSY;
 	}
 */
@@ -1150,8 +1098,90 @@
 	printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
 		mediabay ? "in media bay" : "");
 
-	floppy_count++;
-	
+	return 0;
+
+ out_unmap:
+	iounmap(fs->dma);
+	iounmap(fs->swim3);
+
+ out_release:
+	macio_release_resource(mdev, 0);
+	macio_release_resource(mdev, 1);
+
+	return rc;
+}
+
+static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match)
+{
+	int i, rc;
+	struct gendisk *disk;
+
+	/* Add the drive */
+	rc = swim3_add_device(mdev, floppy_count);
+	if (rc)
+		return rc;
+
+	/* Now create the queue if not there yet */
+	if (swim3_queue == NULL) {
+		/* If we failed, there isn't much we can do as the driver is still
+		 * too dumb to remove the device, just bail out
+		 */
+		if (register_blkdev(FLOPPY_MAJOR, "fd"))
+			return 0;
+		swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
+		if (swim3_queue == NULL) {
+			unregister_blkdev(FLOPPY_MAJOR, "fd");
+			return 0;
+		}
+	}
+
+	/* Now register that disk. Same comment about failure handling */
+	i = floppy_count++;
+	disk = disks[i] = alloc_disk(1);
+	if (disk == NULL)
+		return 0;
+
+	disk->major = FLOPPY_MAJOR;
+	disk->first_minor = i;
+	disk->fops = &floppy_fops;
+	disk->private_data = &floppy_states[i];
+	disk->queue = swim3_queue;
+	disk->flags |= GENHD_FL_REMOVABLE;
+	sprintf(disk->disk_name, "fd%d", i);
+	set_capacity(disk, 2880);
+	add_disk(disk);
+
+	return 0;
+}
+
+static struct of_device_id swim3_match[] =
+{
+	{
+	.name		= "swim3",
+	},
+	{
+	.compatible	= "ohare-swim3"
+	},
+	{
+	.compatible	= "swim3"
+	},
+};
+
+static struct macio_driver swim3_driver =
+{
+	.name 		= "swim3",
+	.match_table	= swim3_match,
+	.probe		= swim3_attach,
+#if 0
+	.suspend	= swim3_suspend,
+	.resume		= swim3_resume,
+#endif
+};
+
+
+int swim3_init(void)
+{
+	macio_register_driver(&swim3_driver);
 	return 0;
 }
 
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 8dc205b..56612a2 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1299,13 +1299,12 @@
 		hp->inbuf_end = hp->inbuf;
 		hp->state = HVSI_CLOSED;
 		hp->vtermno = *vtermno;
-		hp->virq = virt_irq_create_mapping(irq[0]);
+		hp->virq = irq_create_mapping(NULL, irq[0], 0);
 		if (hp->virq == NO_IRQ) {
 			printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
-				__FUNCTION__, hp->virq);
+				__FUNCTION__, irq[0]);
 			continue;
-		} else
-			hp->virq = irq_offset_up(hp->virq);
+		}
 
 		hvsi_count++;
 	}
diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c
index 314fc08..4b08852 100644
--- a/drivers/macintosh/macio-adb.c
+++ b/drivers/macintosh/macio-adb.c
@@ -90,22 +90,12 @@
 {
 	struct device_node *adbs;
 	struct resource r;
+	unsigned int irq;
 
 	adbs = find_compatible_devices("adb", "chrp,adb0");
 	if (adbs == 0)
 		return -ENXIO;
 
-#if 0
-	{ int i = 0;
-
-	printk("macio_adb_init: node = %p, addrs =", adbs->node);
-	while(!of_address_to_resource(adbs, i, &r))
-		printk(" %x(%x)", r.start, r.end - r.start);
-	printk(", intrs =");
-	for (i = 0; i < adbs->n_intrs; ++i)
-		printk(" %x", adbs->intrs[i].line);
-	printk("\n"); }
-#endif
 	if (of_address_to_resource(adbs, 0, &r))
 		return -ENXIO;
 	adb = ioremap(r.start, sizeof(struct adb_regs));
@@ -117,10 +107,9 @@
 	out_8(&adb->active_lo.r, 0xff);
 	out_8(&adb->autopoll.r, APE);
 
-	if (request_irq(adbs->intrs[0].line, macio_adb_interrupt,
-			0, "ADB", (void *)0)) {
-		printk(KERN_ERR "ADB: can't get irq %d\n",
-		       adbs->intrs[0].line);
+	irq = irq_of_parse_and_map(adbs, 0);
+	if (request_irq(irq, macio_adb_interrupt, 0, "ADB", (void *)0)) {
+		printk(KERN_ERR "ADB: can't get irq %d\n", irq);
 		return -EAGAIN;
 	}
 	out_8(&adb->intr_enb.r, DFB | TAG);
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 40ae7b6..80c0c66 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -280,75 +280,128 @@
 static int macio_resource_quirks(struct device_node *np, struct resource *res,
 				 int index)
 {
-	if (res->flags & IORESOURCE_MEM) {
-		/* Grand Central has too large resource 0 on some machines */
-		if (index == 0 && !strcmp(np->name, "gc"))
-			res->end = res->start + 0x1ffff;
+	/* Only quirks for memory resources for now */
+	if ((res->flags & IORESOURCE_MEM) == 0)
+		return 0;
 
-		/* Airport has bogus resource 2 */
-		if (index >= 2 && !strcmp(np->name, "radio"))
-			return 1;
+	/* Grand Central has too large resource 0 on some machines */
+	if (index == 0 && !strcmp(np->name, "gc"))
+		res->end = res->start + 0x1ffff;
+
+	/* Airport has bogus resource 2 */
+	if (index >= 2 && !strcmp(np->name, "radio"))
+		return 1;
 
 #ifndef CONFIG_PPC64
-		/* DBDMAs may have bogus sizes */
-		if ((res->start & 0x0001f000) == 0x00008000)
-			res->end = res->start + 0xff;
+	/* DBDMAs may have bogus sizes */
+	if ((res->start & 0x0001f000) == 0x00008000)
+		res->end = res->start + 0xff;
 #endif /* CONFIG_PPC64 */
 
-		/* ESCC parent eats child resources. We could have added a
-		 * level of hierarchy, but I don't really feel the need
-		 * for it
-		 */
-		if (!strcmp(np->name, "escc"))
-			return 1;
+	/* ESCC parent eats child resources. We could have added a
+	 * level of hierarchy, but I don't really feel the need
+	 * for it
+	 */
+	if (!strcmp(np->name, "escc"))
+		return 1;
 
-		/* ESCC has bogus resources >= 3 */
-		if (index >= 3 && !(strcmp(np->name, "ch-a") &&
-				    strcmp(np->name, "ch-b")))
-			return 1;
+	/* ESCC has bogus resources >= 3 */
+	if (index >= 3 && !(strcmp(np->name, "ch-a") &&
+			    strcmp(np->name, "ch-b")))
+		return 1;
 
-		/* Media bay has too many resources, keep only first one */
-		if (index > 0 && !strcmp(np->name, "media-bay"))
-			return 1;
+	/* Media bay has too many resources, keep only first one */
+	if (index > 0 && !strcmp(np->name, "media-bay"))
+		return 1;
 
-		/* Some older IDE resources have bogus sizes */
-		if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
-		      strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
-			if (index == 0 && (res->end - res->start) > 0xfff)
-				res->end = res->start + 0xfff;
-			if (index == 1 && (res->end - res->start) > 0xff)
-				res->end = res->start + 0xff;
-		}
+	/* Some older IDE resources have bogus sizes */
+	if (!(strcmp(np->name, "IDE") && strcmp(np->name, "ATA") &&
+	      strcmp(np->type, "ide") && strcmp(np->type, "ata"))) {
+		if (index == 0 && (res->end - res->start) > 0xfff)
+			res->end = res->start + 0xfff;
+		if (index == 1 && (res->end - res->start) > 0xff)
+			res->end = res->start + 0xff;
 	}
 	return 0;
 }
 
+static void macio_create_fixup_irq(struct macio_dev *dev, int index,
+				   unsigned int line)
+{
+	unsigned int irq;
+
+	irq = irq_create_mapping(NULL, line, 0);
+	if (irq != NO_IRQ) {
+		dev->interrupt[index].start = irq;
+		dev->interrupt[index].flags = IORESOURCE_IRQ;
+		dev->interrupt[index].name = dev->ofdev.dev.bus_id;
+	}
+	if (dev->n_interrupts <= index)
+		dev->n_interrupts = index + 1;
+}
+
+static void macio_add_missing_resources(struct macio_dev *dev)
+{
+	struct device_node *np = dev->ofdev.node;
+	unsigned int irq_base;
+
+	/* Gatwick has some missing interrupts on child nodes */
+	if (dev->bus->chip->type != macio_gatwick)
+		return;
+
+	/* irq_base is always 64 on gatwick. I have no cleaner way to get
+	 * that value from here at this point
+	 */
+	irq_base = 64;
+
+	/* Fix SCC */
+	if (strcmp(np->name, "ch-a") == 0) {
+		macio_create_fixup_irq(dev, 0, 15 + irq_base);
+		macio_create_fixup_irq(dev, 1,  4 + irq_base);
+		macio_create_fixup_irq(dev, 2,  5 + irq_base);
+		printk(KERN_INFO "macio: fixed SCC irqs on gatwick\n");
+	}
+
+	/* Fix media-bay */
+	if (strcmp(np->name, "media-bay") == 0) {
+		macio_create_fixup_irq(dev, 0, 29 + irq_base);
+		printk(KERN_INFO "macio: fixed media-bay irq on gatwick\n");
+	}
+
+	/* Fix left media bay childs */
+	if (dev->media_bay != NULL && strcmp(np->name, "floppy") == 0) {
+		macio_create_fixup_irq(dev, 0, 19 + irq_base);
+		macio_create_fixup_irq(dev, 1,  1 + irq_base);
+		printk(KERN_INFO "macio: fixed left floppy irqs\n");
+	}
+	if (dev->media_bay != NULL && strcasecmp(np->name, "ata4") == 0) {
+		macio_create_fixup_irq(dev, 0, 14 + irq_base);
+		macio_create_fixup_irq(dev, 0,  3 + irq_base);
+		printk(KERN_INFO "macio: fixed left ide irqs\n");
+	}
+}
 
 static void macio_setup_interrupts(struct macio_dev *dev)
 {
 	struct device_node *np = dev->ofdev.node;
-	int i,j;
+	unsigned int irq;
+	int i = 0, j = 0;
 
-	/* For now, we use pre-parsed entries in the device-tree for
-	 * interrupt routing and addresses, but we should change that
-	 * to dynamically parsed entries and so get rid of most of the
-	 * clutter in struct device_node
-	 */
-	for (i = j = 0; i < np->n_intrs; i++) {
+	for (;;) {
 		struct resource *res = &dev->interrupt[j];
 
 		if (j >= MACIO_DEV_COUNT_IRQS)
 			break;
-		res->start = np->intrs[i].line;
-		res->flags = IORESOURCE_IO;
-		if (np->intrs[j].sense)
-			res->flags |= IORESOURCE_IRQ_LOWLEVEL;
-		else
-			res->flags |= IORESOURCE_IRQ_HIGHEDGE;
+		irq = irq_of_parse_and_map(np, i++);
+		if (irq == NO_IRQ)
+			break;
+		res->start = irq;
+		res->flags = IORESOURCE_IRQ;
 		res->name = dev->ofdev.dev.bus_id;
-		if (macio_resource_quirks(np, res, i))
+		if (macio_resource_quirks(np, res, i - 1)) {
 			memset(res, 0, sizeof(struct resource));
-		else
+			continue;
+		} else
 			j++;
 	}
 	dev->n_interrupts = j;
@@ -445,6 +498,7 @@
 	/* Setup interrupts & resources */
 	macio_setup_interrupts(dev);
 	macio_setup_resources(dev, parent_res);
+	macio_add_missing_resources(dev);
 
 	/* Register with core */
 	if (of_device_register(&dev->ofdev) != 0) {
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index ff6d9bf..f139a74 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -497,8 +497,7 @@
 	smu->doorbell = *data;
 	if (smu->doorbell < 0x50)
 		smu->doorbell += 0x50;
-	if (np->n_intrs > 0)
-		smu->db_irq = np->intrs[0].line;
+	smu->db_irq = irq_of_parse_and_map(np, 0);
 
 	of_node_put(np);
 
@@ -515,8 +514,7 @@
 		smu->msg = *data;
 		if (smu->msg < 0x50)
 			smu->msg += 0x50;
-		if (np->n_intrs > 0)
-			smu->msg_irq = np->intrs[0].line;
+		smu->msg_irq = irq_of_parse_and_map(np, 0);
 		of_node_put(np);
 	} while(0);
 
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index 6501db5..69d5452 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -34,13 +34,6 @@
 static volatile unsigned char __iomem *via;
 static DEFINE_SPINLOCK(cuda_lock);
 
-#ifdef CONFIG_MAC
-#define CUDA_IRQ IRQ_MAC_ADB
-#define eieio()
-#else
-#define CUDA_IRQ vias->intrs[0].line
-#endif
-
 /* VIA registers - spaced 0x200 bytes apart */
 #define RS		0x200		/* skip between registers */
 #define B		0		/* B-side data */
@@ -189,11 +182,24 @@
 
 static int __init via_cuda_start(void)
 {
+    unsigned int irq;
+
     if (via == NULL)
 	return -ENODEV;
 
-    if (request_irq(CUDA_IRQ, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
-	printk(KERN_ERR "cuda_init: can't get irq %d\n", CUDA_IRQ);
+#ifdef CONFIG_MAC
+    irq = IRQ_MAC_ADB;
+#else /* CONFIG_MAC */
+    irq = irq_of_parse_and_map(vias, 0);
+    if (irq == NO_IRQ) {
+	printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
+	       vias->full_name);
+	return -ENODEV;
+    }
+#endif /* CONFIG_MAP */
+
+    if (request_irq(irq, cuda_interrupt, 0, "ADB", cuda_interrupt)) {
+	printk(KERN_ERR "via-cuda: can't request irq %d\n", irq);
 	return -EAGAIN;
     }
 
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index c1193d3..06ca80b 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -64,10 +64,6 @@
 #include <asm/backlight.h>
 #endif
 
-#ifdef CONFIG_PPC32
-#include <asm/open_pic.h>
-#endif
-
 #include "via-pmu-event.h"
 
 /* Some compile options */
@@ -151,7 +147,7 @@
 static int pmu_has_adb;
 static struct device_node *gpio_node;
 static unsigned char __iomem *gpio_reg = NULL;
-static int gpio_irq = -1;
+static int gpio_irq = NO_IRQ;
 static int gpio_irq_enabled = -1;
 static volatile int pmu_suspended = 0;
 static spinlock_t pmu_lock;
@@ -403,22 +399,21 @@
  */
 static int __init via_pmu_start(void)
 {
+	unsigned int irq;
+
 	if (vias == NULL)
 		return -ENODEV;
 
 	batt_req.complete = 1;
 
-#ifndef CONFIG_PPC_MERGE
-	if (pmu_kind == PMU_KEYLARGO_BASED)
-		openpic_set_irq_priority(vias->intrs[0].line,
-					 OPENPIC_PRIORITY_DEFAULT + 1);
-#endif
-
-	if (request_irq(vias->intrs[0].line, via_pmu_interrupt, 0, "VIA-PMU",
-			(void *)0)) {
-		printk(KERN_ERR "VIA-PMU: can't get irq %d\n",
-		       vias->intrs[0].line);
-		return -EAGAIN;
+	irq = irq_of_parse_and_map(vias, 0);
+	if (irq == NO_IRQ) {
+		printk(KERN_ERR "via-pmu: can't map interruptn");
+		return -ENODEV;
+	}
+	if (request_irq(irq, via_pmu_interrupt, 0, "VIA-PMU", (void *)0)) {
+		printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
+		return -ENODEV;
 	}
 
 	if (pmu_kind == PMU_KEYLARGO_BASED) {
@@ -426,10 +421,10 @@
 		if (gpio_node == NULL)
 			gpio_node = of_find_node_by_name(NULL,
 							 "pmu-interrupt");
-		if (gpio_node && gpio_node->n_intrs > 0)
-			gpio_irq = gpio_node->intrs[0].line;
+		if (gpio_node)
+			gpio_irq = irq_of_parse_and_map(gpio_node, 0);
 
-		if (gpio_irq != -1) {
+		if (gpio_irq != NO_IRQ) {
 			if (request_irq(gpio_irq, gpio1_interrupt, 0,
 					"GPIO1 ADB", (void *)0))
 				printk(KERN_ERR "pmu: can't get irq %d"
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index f2c0bf8..29e4b5a 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -242,12 +242,12 @@
 	}
 	rc = request_irq(mp->tx_dma_intr, mace_txdma_intr, 0, "MACE-txdma", dev);
 	if (rc) {
-		printk(KERN_ERR "MACE: can't get irq %d\n", mace->intrs[1].line);
+		printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr);
 		goto err_free_irq;
 	}
 	rc = request_irq(mp->rx_dma_intr, mace_rxdma_intr, 0, "MACE-rxdma", dev);
 	if (rc) {
-		printk(KERN_ERR "MACE: can't get irq %d\n", mace->intrs[2].line);
+		printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr);
 		goto err_free_tx_irq;
 	}
 
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 459c023..bfd2a22 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1443,8 +1443,8 @@
 			uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
 			goto no_dma;
 		}
-		uap->tx_dma_irq = np->intrs[1].line;
-		uap->rx_dma_irq = np->intrs[2].line;
+		uap->tx_dma_irq = irq_of_parse_and_map(np, 1);
+		uap->rx_dma_irq = irq_of_parse_and_map(np, 2);
 	}
 no_dma:
 
@@ -1491,7 +1491,7 @@
 	 * Init remaining bits of "port" structure
 	 */
 	uap->port.iotype = UPIO_MEM;
-	uap->port.irq = np->intrs[0].line;
+	uap->port.irq = irq_of_parse_and_map(np, 0);
 	uap->port.uartclk = ZS_CLOCK;
 	uap->port.fifosize = 1;
 	uap->port.ops = &pmz_pops;
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index bfeb11b..71ce1fa 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -97,14 +97,43 @@
 			  u_int transp, struct fb_info *info)
 {
 	struct offb_par *par = (struct offb_par *) info->par;
+	int i, depth;
+	u32 *pal = info->pseudo_palette;
 
-	if (!par->cmap_adr || regno > 255)
+	depth = info->var.bits_per_pixel;
+	if (depth == 16)
+		depth = (info->var.green.length == 5) ? 15 : 16;
+
+	if (regno > 255 ||
+	    (depth == 16 && regno > 63) ||
+	    (depth == 15 && regno > 31))
 		return 1;
 
+	if (regno < 16) {
+		switch (depth) {
+		case 15:
+			pal[regno] = (regno << 10) | (regno << 5) | regno;
+			break;
+		case 16:
+			pal[regno] = (regno << 11) | (regno << 5) | regno;
+			break;
+		case 24:
+			pal[regno] = (regno << 16) | (regno << 8) | regno;
+			break;
+		case 32:
+			i = (regno << 8) | regno;
+			pal[regno] = (i << 16) | i;
+			break;
+		}
+	}
+
 	red >>= 8;
 	green >>= 8;
 	blue >>= 8;
 
+	if (!par->cmap_adr)
+		return 0;
+
 	switch (par->cmap_type) {
 	case cmap_m64:
 		writeb(regno, par->cmap_adr);
@@ -141,20 +170,6 @@
 		break;
 	}
 
-	if (regno < 16)
-		switch (info->var.bits_per_pixel) {
-		case 16:
-			((u16 *) (info->pseudo_palette))[regno] =
-			    (regno << 10) | (regno << 5) | regno;
-			break;
-		case 32:
-			{
-				int i = (regno << 8) | regno;
-				((u32 *) (info->pseudo_palette))[regno] =
-				    (i << 16) | i;
-				break;
-			}
-		}
 	return 0;
 }
 
@@ -223,81 +238,9 @@
 {
 	struct device_node *dp = NULL, *boot_disp = NULL;
 
-#if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32)
-	struct device_node *macos_display = NULL;
-#endif
 	if (fb_get_options("offb", NULL))
 		return -ENODEV;
 
-#if defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32)
-	/* If we're booted from BootX... */
-	if (boot_infos != 0) {
-		unsigned long addr =
-		    (unsigned long) boot_infos->dispDeviceBase;
-		u32 *addrp;
-		u64 daddr, dsize;
-		unsigned int flags;
-
-		/* find the device node corresponding to the macos display */
-		while ((dp = of_find_node_by_type(dp, "display"))) {
-			int i;
-
-			/*
-			 * Look for an AAPL,address property first.
-			 */
-			unsigned int na;
-			unsigned int *ap =
-				(unsigned int *)get_property(dp, "AAPL,address",
-							     &na);
-			if (ap != 0) {
-				for (na /= sizeof(unsigned int); na > 0;
-				     --na, ++ap)
-					if (*ap <= addr &&
-					    addr < *ap + 0x1000000) {
-						macos_display = dp;
-						goto foundit;
-					}
-			}
-
-			/*
-			 * See if the display address is in one of the address
-			 * ranges for this display.
-			 */
-			i = 0;
-			for (;;) {
-				addrp = of_get_address(dp, i++, &dsize, &flags);
-				if (addrp == NULL)
-					break;
-				if (!(flags & IORESOURCE_MEM))
-					continue;
-				daddr = of_translate_address(dp, addrp);
-				if (daddr == OF_BAD_ADDR)
-					continue;
-				if (daddr <= addr && addr < (daddr + dsize)) {
-					macos_display = dp;
-					goto foundit;
-				}
-			}
-		foundit:
-			if (macos_display) {
-				printk(KERN_INFO "MacOS display is %s\n",
-				       dp->full_name);
-				break;
-			}
-		}
-
-		/* initialize it */
-		offb_init_fb(macos_display ? macos_display->
-			     name : "MacOS display",
-			     macos_display ? macos_display->
-			     full_name : "MacOS display",
-			     boot_infos->dispDeviceRect[2],
-			     boot_infos->dispDeviceRect[3],
-			     boot_infos->dispDeviceDepth,
-			     boot_infos->dispDeviceRowBytes, addr, NULL);
-	}
-#endif /* defined(CONFIG_BOOTX_TEXT) && defined(CONFIG_PPC32) */
-
 	for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) {
 		if (get_property(dp, "linux,opened", NULL) &&
 		    get_property(dp, "linux,boot-display", NULL)) {
@@ -317,94 +260,93 @@
 
 static void __init offb_init_nodriver(struct device_node *dp)
 {
-	int *pp, i;
 	unsigned int len;
-	int width = 640, height = 480, depth = 8, pitch;
-	unsigned int flags, rsize, *up;
-	u64 address = OF_BAD_ADDR;
-	u32 *addrp;
+	int i, width = 640, height = 480, depth = 8, pitch = 640;
+	unsigned int flags, rsize, addr_prop = 0;
+	unsigned long max_size = 0;
+	u64 rstart, address = OF_BAD_ADDR;
+	u32 *pp, *addrp, *up;
 	u64 asize;
 
-	if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
-	    && len == sizeof(int))
+	pp = (u32 *)get_property(dp, "linux,bootx-depth", &len);
+	if (pp == NULL)
+		pp = (u32 *)get_property(dp, "depth", &len);
+	if (pp && len == sizeof(u32))
 		depth = *pp;
-	if ((pp = (int *) get_property(dp, "width", &len)) != NULL
-	    && len == sizeof(int))
+
+	pp = (u32 *)get_property(dp, "linux,bootx-width", &len);
+	if (pp == NULL)
+		pp = (u32 *)get_property(dp, "width", &len);
+	if (pp && len == sizeof(u32))
 		width = *pp;
-	if ((pp = (int *) get_property(dp, "height", &len)) != NULL
-	    && len == sizeof(int))
+
+	pp = (u32 *)get_property(dp, "linux,bootx-height", &len);
+	if (pp == NULL)
+		pp = (u32 *)get_property(dp, "height", &len);
+	if (pp && len == sizeof(u32))
 		height = *pp;
-	if ((pp = (int *) get_property(dp, "linebytes", &len)) != NULL
-	    && len == sizeof(int)) {
+
+	pp = (u32 *)get_property(dp, "linux,bootx-linebytes", &len);
+	if (pp == NULL)
+		pp = (u32 *)get_property(dp, "linebytes", &len);
+	if (pp && len == sizeof(u32))
 		pitch = *pp;
-		if (pitch == 1)
-			pitch = 0x1000;
-	} else
-		pitch = width;
+	else
+		pitch = width * ((depth + 7) / 8);
 
-       rsize = (unsigned long)pitch * (unsigned long)height *
-               (unsigned long)(depth / 8);
+	rsize = (unsigned long)pitch * (unsigned long)height;
 
-       /* Try to match device to a PCI device in order to get a properly
-	* translated address rather then trying to decode the open firmware
-	* stuff in various incorrect ways
-	*/
-#ifdef CONFIG_PCI
-       /* First try to locate the PCI device if any */
-       {
-               struct pci_dev *pdev = NULL;
+	/* Ok, now we try to figure out the address of the framebuffer.
+	 *
+	 * Unfortunately, Open Firmware doesn't provide a standard way to do
+	 * so. All we can do is a dodgy heuristic that happens to work in
+	 * practice. On most machines, the "address" property contains what
+	 * we need, though not on Matrox cards found in IBM machines. What I've
+	 * found that appears to give good results is to go through the PCI
+	 * ranges and pick one that is both big enough and if possible encloses
+	 * the "address" property. If none match, we pick the biggest
+	 */
+	up = (u32 *)get_property(dp, "linux,bootx-addr", &len);
+	if (up == NULL)
+		up = (u32 *)get_property(dp, "address", &len);
+	if (up && len == sizeof(u32))
+		addr_prop = *up;
 
-	       for_each_pci_dev(pdev) {
-                       if (dp == pci_device_to_OF_node(pdev))
-                               break;
-	       }
-               if (pdev) {
-                       for (i = 0; i < 6 && address == OF_BAD_ADDR; i++) {
-                               if ((pci_resource_flags(pdev, i) &
-				    IORESOURCE_MEM) &&
-				   (pci_resource_len(pdev, i) >= rsize))
-                                       address = pci_resource_start(pdev, i);
-                       }
-		       pci_dev_put(pdev);
-               }
-        }
-#endif /* CONFIG_PCI */
+	for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags))
+		     != NULL; i++) {
+		int match_addrp = 0;
 
-       /* This one is dodgy, we may drop it ... */
-       if (address == OF_BAD_ADDR &&
-	   (up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
-	   len == sizeof(unsigned int))
-	       address = (u64) * up;
-
-       if (address == OF_BAD_ADDR) {
-	       for (i = 0; (addrp = of_get_address(dp, i, &asize, &flags))
-			    != NULL; i++) {
-		       if (!(flags & IORESOURCE_MEM))
-			       continue;
-		       if (asize >= pitch * height * depth / 8)
-			       break;
-	       }
-		if (addrp == NULL) {
-			printk(KERN_ERR
-			       "no framebuffer address found for %s\n",
-			       dp->full_name);
-			return;
+		if (!(flags & IORESOURCE_MEM))
+			continue;
+		if (asize < rsize)
+			continue;
+		rstart = of_translate_address(dp, addrp);
+		if (rstart == OF_BAD_ADDR)
+			continue;
+		if (addr_prop && (rstart <= addr_prop) &&
+		    ((rstart + asize) >= (addr_prop + rsize)))
+			match_addrp = 1;
+		if (match_addrp) {
+			address = addr_prop;
+			break;
 		}
-		address = of_translate_address(dp, addrp);
-		if (address == OF_BAD_ADDR) {
-			printk(KERN_ERR
-			       "can't translate framebuffer address for %s\n",
-			       dp->full_name);
-			return;
-		}
+		if (rsize > max_size) {
+			max_size = rsize;
+			address = OF_BAD_ADDR;
+ 		}
 
+		if (address == OF_BAD_ADDR)
+			address = rstart;
+	}
+	if (address == OF_BAD_ADDR && addr_prop)
+		address = (u64)addr_prop;
+	if (address != OF_BAD_ADDR) {
 		/* kludge for valkyrie */
 		if (strcmp(dp->name, "valkyrie") == 0)
 			address += 0x1000;
+		offb_init_fb(dp->name, dp->full_name, width, height, depth,
+			     pitch, address, dp);
 	}
-	offb_init_fb(dp->name, dp->full_name, width, height, depth,
-		     pitch, address, dp);
-
 }
 
 static void __init offb_init_fb(const char *name, const char *full_name,
@@ -412,7 +354,7 @@
 				int pitch, unsigned long address,
 				struct device_node *dp)
 {
-	unsigned long res_size = pitch * height * depth / 8;
+	unsigned long res_size = pitch * height * (depth + 7) / 8;
 	struct offb_par *par = &default_par;
 	unsigned long res_start = address;
 	struct fb_fix_screeninfo *fix;
@@ -426,7 +368,7 @@
 	printk(KERN_INFO
 	       "Using unsupported %dx%d %s at %lx, depth=%d, pitch=%d\n",
 	       width, height, name, address, depth, pitch);
-	if (depth != 8 && depth != 16 && depth != 32) {
+	if (depth != 8 && depth != 15 && depth != 16 && depth != 32) {
 		printk(KERN_ERR "%s: can't use depth = %d\n", full_name,
 		       depth);
 		release_mem_region(res_start, res_size);
@@ -502,7 +444,6 @@
 				   : */ FB_VISUAL_TRUECOLOR;
 
 	var->xoffset = var->yoffset = 0;
-	var->bits_per_pixel = depth;
 	switch (depth) {
 	case 8:
 		var->bits_per_pixel = 8;
@@ -515,7 +456,7 @@
 		var->transp.offset = 0;
 		var->transp.length = 0;
 		break;
-	case 16:		/* RGB 555 */
+	case 15:		/* RGB 555 */
 		var->bits_per_pixel = 16;
 		var->red.offset = 10;
 		var->red.length = 5;
@@ -526,6 +467,17 @@
 		var->transp.offset = 0;
 		var->transp.length = 0;
 		break;
+	case 16:		/* RGB 565 */
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
 	case 32:		/* RGB 888 */
 		var->bits_per_pixel = 32;
 		var->red.offset = 16;
diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
index 0392159..c80e113 100644
--- a/include/asm-powerpc/i8259.h
+++ b/include/asm-powerpc/i8259.h
@@ -4,11 +4,13 @@
 
 #include <linux/irq.h>
 
-extern struct hw_interrupt_type i8259_pic;
-
+#ifdef CONFIG_PPC_MERGE
+extern void i8259_init(struct device_node *node, unsigned long intack_addr);
+extern unsigned int i8259_irq(struct pt_regs *regs);
+#else
 extern void i8259_init(unsigned long intack_addr, int offset);
 extern int i8259_irq(struct pt_regs *regs);
-extern int i8259_irq_cascade(struct pt_regs *regs, void *unused);
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index eb5f33e..e057547 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -9,13 +9,326 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/config.h>
 #include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
 
 #include <asm/types.h>
 #include <asm/atomic.h>
 
-/* this number is used when no interrupt has been assigned */
+
+#define get_irq_desc(irq) (&irq_desc[(irq)])
+
+/* Define a way to iterate across irqs. */
+#define for_each_irq(i) \
+	for ((i) = 0; (i) < NR_IRQS; ++(i))
+
+extern atomic_t ppc_n_lost_interrupts;
+
+#ifdef CONFIG_PPC_MERGE
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(0)
+
+/* This is a special irq number to return from get_irq() to tell that
+ * no interrupt happened _and_ ignore it (don't count it as bad). Some
+ * platforms like iSeries rely on that.
+ */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/* Total number of virq in the platform (make it a CONFIG_* option ? */
+#define NR_IRQS		512
+
+/* Number of irqs reserved for the legacy controller */
+#define NUM_ISA_INTERRUPTS	16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+/* Interrupt controller "host" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The host
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a host can cover more than one PIC if they have a flat number
+ * model). It's the host callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are fairly agnostic to the fact that
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart host->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
+ */
+struct irq_host;
+struct radix_tree_root;
+
+/* Functions below are provided by the host and called whenever a new mapping
+ * is created or an old mapping is disposed. The host can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
+ */
+struct irq_host_ops {
+	/* Match an interrupt controller device node to a host, returns
+	 * 1 on a match
+	 */
+	int (*match)(struct irq_host *h, struct device_node *node);
+
+	/* Create or update a mapping between a virtual irq number and a hw
+	 * irq number. This can be called several times for the same mapping
+	 * but with different flags, though unmap shall always be called
+	 * before the virq->hw mapping is changed.
+	 */
+	int (*map)(struct irq_host *h, unsigned int virq,
+		   irq_hw_number_t hw, unsigned int flags);
+
+	/* Dispose of such a mapping */
+	void (*unmap)(struct irq_host *h, unsigned int virq);
+
+	/* Translate device-tree interrupt specifier from raw format coming
+	 * from the firmware to a irq_hw_number_t (interrupt line number) and
+	 * trigger flags that can be passed to irq_create_mapping().
+	 * If no translation is provided, raw format is assumed to be one cell
+	 * for interrupt line and default sense.
+	 */
+	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
+		     u32 *intspec, unsigned int intsize,
+		     irq_hw_number_t *out_hwirq, unsigned int *out_flags);
+};
+
+struct irq_host {
+	struct list_head	link;
+
+	/* type of reverse mapping technique */
+	unsigned int		revmap_type;
+#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
+#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
+#define IRQ_HOST_MAP_TREE	3 /* radix tree */
+	union {
+		struct {
+			unsigned int size;
+			unsigned int *revmap;
+		} linear;
+		struct radix_tree_root tree;
+	} revmap_data;
+	struct irq_host_ops	*ops;
+	void			*host_data;
+	irq_hw_number_t		inval_irq;
+};
+
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
+extern struct irq_map_entry irq_map[NR_IRQS];
+
+
+/***
+ * irq_alloc_host - Allocate a new irq_host data structure
+ * @node: device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @ops: map/unmap host callbacks
+ * @inval_irq: provide a hw number in that host space that is always invalid
+ *
+ * Allocates and initialize and irq_host structure. Note that in the case of
+ * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * later during boot automatically (the reverse mapping will use the slow path
+ * until that happens).
+ */
+extern struct irq_host *irq_alloc_host(unsigned int revmap_type,
+				       unsigned int revmap_arg,
+				       struct irq_host_ops *ops,
+				       irq_hw_number_t inval_irq);
+
+
+/***
+ * irq_find_host - Locates a host for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+extern struct irq_host *irq_find_host(struct device_node *node);
+
+
+/***
+ * irq_set_default_host - Set a "default" host
+ * @host: default host pointer
+ *
+ * For convenience, it's possible to set a "default" host that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+extern void irq_set_default_host(struct irq_host *host);
+
+
+/***
+ * irq_set_virq_count - Set the maximum number of virt irqs
+ * @count: number of linux virtual irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+extern void irq_set_virq_count(unsigned int count);
+
+
+/***
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ * @flags: flags passed to the controller. contains the trigger type among
+ *         others. Use IRQ_TYPE_* defined in include/linux/irq.h
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number. The flags can be used to provide sense information to the
+ * controller (typically extracted from the device-tree). If no information
+ * is passed, the controller defaults will apply (for example, xics can only
+ * do edge so flags are irrelevant for some pseries specific irqs).
+ *
+ * The device-tree generally contains the trigger info in an encoding that is
+ * specific to a given type of controller. In that case, you can directly use
+ * host->ops->trigger_xlate() to translate that.
+ *
+ * It is recommended that new PICs that don't have existing OF bindings chose
+ * to use a representation of triggers identical to linux.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+				       irq_hw_number_t hwirq,
+				       unsigned int flags);
+
+
+/***
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+extern void irq_dispose_mapping(unsigned int virq);
+
+/***
+ * irq_find_mapping - Find a linux virq from an hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
+ */
+extern unsigned int irq_find_mapping(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+
+/***
+ * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+extern unsigned int irq_radix_revmap(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/***
+ * irq_linear_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+
+extern unsigned int irq_linear_revmap(struct irq_host *host,
+				      irq_hw_number_t hwirq);
+
+
+
+/***
+ * irq_alloc_virt - Allocate virtual irq numbers
+ * @host: host owning these new virtual irqs
+ * @count: number of consecutive numbers to allocate
+ * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
+ *
+ * This is a low level function that is used internally by irq_create_mapping()
+ * and that can be used by some irq controllers implementations for things
+ * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
+ */
+extern unsigned int irq_alloc_virt(struct irq_host *host,
+				   unsigned int count,
+				   unsigned int hint);
+
+/***
+ * irq_free_virt - Free virtual irq numbers
+ * @virq: virtual irq number of the first interrupt to free
+ * @count: number of interrupts to free
+ *
+ * This function is the opposite of irq_alloc_virt. It will not clear reverse
+ * maps, this should be done previously by unmap'ing the interrupt. In fact,
+ * all interrupts covered by the range being freed should have been unmapped
+ * prior to calling this.
+ */
+extern void irq_free_virt(unsigned int virq, unsigned int count);
+
+
+/* -- OF helpers -- */
+
+/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  u32 *intspec, unsigned int intsize);
+
+
+/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/* -- End OF helpers -- */
+
+/***
+ * irq_early_init - Init irq remapping subsystem
+ */
+extern void irq_early_init(void);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+
+#else /* CONFIG_PPC_MERGE */
+
+/* This number is used when no interrupt has been assigned */
 #define NO_IRQ			(-1)
+#define NO_IRQ_IGNORE		(-2)
+
 
 /*
  * These constants are used for passing information about interrupt
@@ -30,56 +343,6 @@
 #define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
 #define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
 
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-	for ((i) = 0; (i) < NR_IRQS; ++(i))
-
-#ifdef CONFIG_PPC64
-
-/*
- * Maximum number of interrupt sources that we can handle.
- */
-#define NR_IRQS		512
-
-/* Interrupt numbers are virtual in case they are sparsely
- * distributed by the hardware.
- */
-extern unsigned int virt_irq_to_real_map[NR_IRQS];
-
-/* The maximum virtual IRQ number that we support.  This
- * can be set by the platform and will be reduced by the
- * value of __irq_offset_value.  It defaults to and is
- * capped by (NR_IRQS - 1).
- */
-extern unsigned int virt_irq_max;
-
-/* Create a mapping for a real_irq if it doesn't already exist.
- * Return the virtual irq as a convenience.
- */
-int virt_irq_create_mapping(unsigned int real_irq);
-void virt_irq_init(void);
-
-static inline unsigned int virt_irq_to_real(unsigned int virt_irq)
-{
-	return virt_irq_to_real_map[virt_irq];
-}
-
-extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq);
-
-/*
- * List of interrupt controllers.
- */
-#define IC_INVALID    0
-#define IC_OPEN_PIC   1
-#define IC_PPC_XIC    2
-#define IC_CELL_PIC   3
-#define IC_ISERIES    4
-
-extern u64 ppc64_interrupt_controller;
-
-#else /* 32-bit */
 
 #if defined(CONFIG_40x)
 #include <asm/ibm4xx.h>
@@ -512,16 +775,11 @@
 
 #endif /* CONFIG_8260 */
 
-#endif
+#endif /* Whatever way too big #ifdef */
 
 #define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 /* pedantic: these are long because they are used with set_bit --RR */
 extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-extern atomic_t ppc_n_lost_interrupts;
-
-#define virt_irq_create_mapping(x)	(x)
-
-#endif
 
 /*
  * Because many systems have two overlapping names spaces for
@@ -560,6 +818,7 @@
 		irq = 9;
 	return irq;
 }
+#endif /* CONFIG_PPC_MERGE */
 
 extern int distribute_irqs;
 
@@ -579,9 +838,8 @@
 
 extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
-extern int call___do_IRQ(int irq, struct pt_regs *regs,
-		struct thread_info *tp);
-
+extern int call_handle_irq(int irq, void *p1, void *p2,
+			   struct thread_info *tp, void *func);
 #else
 #define irq_ctx_init()
 
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index eba133d..c17c137 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -97,7 +97,7 @@
 	void		(*show_percpuinfo)(struct seq_file *m, int i);
 
 	void		(*init_IRQ)(void);
-	int		(*get_irq)(struct pt_regs *);
+	unsigned int	(*get_irq)(struct pt_regs *);
 #ifdef CONFIG_KEXEC
 	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
 #endif
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index f0d22ac..eb241c9 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -114,9 +114,6 @@
 #define MPIC_VEC_TIMER_1	248
 #define MPIC_VEC_TIMER_0	247
 
-/* Type definition of the cascade handler */
-typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
-
 #ifdef CONFIG_MPIC_BROKEN_U3
 /* Fixup table entry */
 struct mpic_irq_fixup
@@ -132,10 +129,19 @@
 /* The instance data of a given MPIC */
 struct mpic
 {
+	/* The device node of the interrupt controller */
+	struct device_node	*of_node;
+
+	/* The remapper for this MPIC */
+	struct irq_host		*irqhost;
+
 	/* The "linux" controller struct */
-	hw_irq_controller	hc_irq;
+	struct irq_chip		hc_irq;
+#ifdef CONFIG_MPIC_BROKEN_U3
+	struct irq_chip		hc_ht_irq;
+#endif
 #ifdef CONFIG_SMP
-	hw_irq_controller	hc_ipi;
+	struct irq_chip		hc_ipi;
 #endif
 	const char		*name;
 	/* Flags */
@@ -144,20 +150,12 @@
 	unsigned int		isu_size;
 	unsigned int		isu_shift;
 	unsigned int		isu_mask;
-	/* Offset of irq vector numbers */
-	unsigned int		irq_offset;	
 	unsigned int		irq_count;
-	/* Offset of ipi vector numbers */
-	unsigned int		ipi_offset;
 	/* Number of sources */
 	unsigned int		num_sources;
 	/* Number of CPUs */
 	unsigned int		num_cpus;
-	/* cascade handler */
-	mpic_cascade_t		cascade;
-	void			*cascade_data;
-	unsigned int		cascade_vec;
-	/* senses array */
+	/* default senses array */
 	unsigned char		*senses;
 	unsigned int		senses_count;
 
@@ -213,14 +211,11 @@
  * The values in the array start at the first source of the MPIC,
  * that is senses[0] correspond to linux irq "irq_offset".
  */
-extern struct mpic *mpic_alloc(unsigned long phys_addr,
+extern struct mpic *mpic_alloc(struct device_node *node,
+			       unsigned long phys_addr,
 			       unsigned int flags,
 			       unsigned int isu_size,
-			       unsigned int irq_offset,
 			       unsigned int irq_count,
-			       unsigned int ipi_offset,
-			       unsigned char *senses,
-			       unsigned int senses_num,
 			       const char *name);
 
 /* Assign ISUs, to call before mpic_init()
@@ -232,22 +227,27 @@
 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 			    unsigned long phys_addr);
 
+/* Set default sense codes
+ *
+ * @mpic:	controller
+ * @senses:	array of sense codes
+ * @count:	size of above array
+ *
+ * Optionally provide an array (indexed on hardware interrupt numbers
+ * for this MPIC) of default sense codes for the chip. Those are linux
+ * sense codes IRQ_TYPE_*
+ *
+ * The driver gets ownership of the pointer, don't dispose of it or
+ * anything like that. __init only.
+ */
+extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
+
+
 /* Initialize the controller. After this has been called, none of the above
  * should be called again for this mpic
  */
 extern void mpic_init(struct mpic *mpic);
 
-/* Setup a cascade. Currently, only one cascade is supported this
- * way, though you can always do a normal request_irq() and add
- * other cascades this way. You should call this _after_ having
- * added all the ISUs
- *
- * @irq_no:	"linux" irq number of the cascade (that is offset'ed vector)
- * @handler:	cascade handler function
- */
-extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
-			       void *data);
-
 /*
  * All of the following functions must only be used after the
  * ISUs have been assigned and the controller fully initialized
@@ -284,9 +284,9 @@
 void smp_mpic_message_pass(int target, int msg);
 
 /* Fetch interrupt from a given mpic */
-extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
+extern unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
 /* This one gets to the primary mpic */
-extern int mpic_get_irq(struct pt_regs *regs);
+extern unsigned int mpic_get_irq(struct pt_regs *regs);
 
 /* Set the EPIC clock ratio */
 void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
@@ -294,8 +294,5 @@
 /* Enable/Disable EPIC serial interrupt mode */
 void mpic_set_serial_int(struct mpic *mpic, int enable);
 
-/* global mpic for pSeries */
-extern struct mpic *pSeries_mpic;
-
 #endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MPIC_H */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 010d186..b095a28 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -64,11 +64,6 @@
 typedef u32 phandle;
 typedef u32 ihandle;
 
-struct interrupt_info {
-	int	line;
-	int	sense;		/* +ve/-ve logic, edge or level, etc. */
-};
-
 struct property {
 	char	*name;
 	int	length;
@@ -81,8 +76,6 @@
 	char	*type;
 	phandle	node;
 	phandle linux_phandle;
-	int	n_intrs;
-	struct	interrupt_info *intrs;
 	char	*full_name;
 
 	struct	property *properties;
@@ -167,8 +160,8 @@
 extern void early_init_devtree(void *);
 extern int device_is_compatible(struct device_node *device, const char *);
 extern int machine_is_compatible(const char *compat);
-extern unsigned char *get_property(struct device_node *node, const char *name,
-				   int *lenp);
+extern void *get_property(struct device_node *node, const char *name,
+		int *lenp);
 extern void print_properties(struct device_node *node);
 extern int prom_n_addr_cells(struct device_node* np);
 extern int prom_n_size_cells(struct device_node* np);
@@ -204,6 +197,15 @@
  */
 
 
+/* Helper to read a big number */
+static inline u64 of_read_number(u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
 /* Translate an OF address block into a CPU physical address
  */
 #define OF_BAD_ADDR	((u64)-1)
@@ -240,5 +242,83 @@
 /* CPU OF node matching */
 struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
 
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC		 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+	struct device_node *controller;	/* Interrupt controller node */
+	u32 size;			/* Specifier size */
+	u32 specifier[OF_MAX_IRQ_SPEC];	/* Specifier copy */
+};
+
+/***
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags:	flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC	0x00000001
+#define OF_IMAP_NO_PHANDLE	0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/***
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent:	the device interrupt parent
+ * @intspec:	interrupt specifier ("interrupts" property of the device)
+ * @addr:	address specifier (start of "reg" property of the device)
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
+			  struct of_irq *out_irq);
+
+
+/***
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device:	the device whose interrupt is to be resolved
+ * @index:     	index of the interrupt to resolve
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+			  struct of_irq *out_irq);
+
+/***
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:	the device whose interrupt is to be resolved
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PROM_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 9609d3e..c02d105 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -117,6 +117,7 @@
 	struct list_head sched_list;
 	int number;
 	int nid;
+	unsigned int irqs[3];
 	u32 isrc;
 	u32 node;
 	u64 flags;
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 54105bd..9336f2e 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -261,10 +261,13 @@
 	 * keep it masked and get out of here
 	 */
 	action = desc->action;
-	if (unlikely(!action || (desc->status & IRQ_DISABLED)))
+	if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
+		desc->status |= IRQ_PENDING;
 		goto out;
+	}
 
 	desc->status |= IRQ_INPROGRESS;
+	desc->status &= ~IRQ_PENDING;
 	spin_unlock(&desc->lock);
 
 	action_ret = handle_IRQ_event(irq, regs, action);
diff --git a/sound/aoa/core/snd-aoa-gpio-feature.c b/sound/aoa/core/snd-aoa-gpio-feature.c
index bab9754..7ae0c0b 100644
--- a/sound/aoa/core/snd-aoa-gpio-feature.c
+++ b/sound/aoa/core/snd-aoa-gpio-feature.c
@@ -112,12 +112,7 @@
 
 static void get_irq(struct device_node * np, int *irqptr)
 {
-	*irqptr = -1;
-	if (!np)
-		return;
-	if (np->n_intrs != 1)
-		return;
-	*irqptr = np->intrs[0].line;
+	*irqptr = irq_of_parse_and_map(np, 0);
 }
 
 /* 0x4 is outenable, 0x1 is out, thus 4 or 5 */
diff --git a/sound/aoa/soundbus/i2sbus/i2sbus-core.c b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
index f268dac..01c0724 100644
--- a/sound/aoa/soundbus/i2sbus/i2sbus-core.c
+++ b/sound/aoa/soundbus/i2sbus/i2sbus-core.c
@@ -129,7 +129,7 @@
 	if (strncmp(np->name, "i2s-", 4))
 		return 0;
 
-	if (np->n_intrs != 3)
+	if (macio_irq_count(macio) != 3)
 		return 0;
 
 	dev = kzalloc(sizeof(struct i2sbus_dev), GFP_KERNEL);
@@ -183,9 +183,10 @@
 		snprintf(dev->rnames[i], sizeof(dev->rnames[i]), rnames[i], np->name);
 	}
 	for (i=0;i<3;i++) {
-		if (request_irq(np->intrs[i].line, ints[i], 0, dev->rnames[i], dev))
+		if (request_irq(macio_irq(macio, i), ints[i], 0,
+				dev->rnames[i], dev))
 			goto err;
-		dev->interrupts[i] = np->intrs[i].line;
+		dev->interrupts[i] = macio_irq(macio, i);
 	}
 
 	for (i=0;i<3;i++) {
diff --git a/sound/oss/dmasound/dmasound_awacs.c b/sound/oss/dmasound/dmasound_awacs.c
index de454ca..4359903 100644
--- a/sound/oss/dmasound/dmasound_awacs.c
+++ b/sound/oss/dmasound/dmasound_awacs.c
@@ -374,10 +374,7 @@
 		*gpio_pol = *pp;
 	else
 		*gpio_pol = 1;
-	if (np->n_intrs > 0)
-		return np->intrs[0].line;
-	
-	return 0;
+	return irq_of_parse_and_map(np, 0);
 }
 
 static inline void
@@ -2864,14 +2861,13 @@
 	 * other info if necessary (early AWACS we want to read chip ids)
 	 */
 
-	if (of_get_address(io, 2, NULL, NULL) == NULL || io->n_intrs < 3) {
+	if (of_get_address(io, 2, NULL, NULL) == NULL) {
 		/* OK - maybe we need to use the 'awacs' node (on earlier
 		 * machines).
 		 */
 		if (awacs_node) {
 			io = awacs_node ;
-			if (of_get_address(io, 2, NULL, NULL) == NULL ||
-			    io->n_intrs < 3) {
+			if (of_get_address(io, 2, NULL, NULL) == NULL) {
 				printk("dmasound_pmac: can't use %s\n",
 				       io->full_name);
 				return -ENODEV;
@@ -2940,9 +2936,9 @@
 	if (awacs_revision == AWACS_SCREAMER && awacs)
 		awacs_recalibrate();
 
-	awacs_irq = io->intrs[0].line;
-	awacs_tx_irq = io->intrs[1].line;
-	awacs_rx_irq = io->intrs[2].line;
+	awacs_irq = irq_of_parse_and_map(io, 0);
+	awacs_tx_irq = irq_of_parse_and_map(io, 1);
+	awacs_rx_irq = irq_of_parse_and_map(io, 2);
 
 	/* Hack for legacy crap that will be killed someday */
 	awacs_node = io;
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 90db9a1..6414306 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -1120,6 +1120,7 @@
 	struct snd_pmac *chip;
 	struct device_node *np;
 	int i, err;
+	unsigned int irq;
 	unsigned long ctrl_addr, txdma_addr, rxdma_addr;
 	static struct snd_device_ops ops = {
 		.dev_free =	snd_pmac_dev_free,
@@ -1153,10 +1154,6 @@
 	if (chip->is_k2) {
 		static char *rnames[] = {
 			"Sound Control", "Sound DMA" };
-		if (np->n_intrs < 3) {
-			err = -ENODEV;
-			goto __error;
-		}
 		for (i = 0; i < 2; i ++) {
 			if (of_address_to_resource(np->parent, i,
 						   &chip->rsrc[i])) {
@@ -1185,10 +1182,6 @@
 	} else {
 		static char *rnames[] = {
 			"Sound Control", "Sound Tx DMA", "Sound Rx DMA" };
-		if (np->n_intrs < 3) {
-			err = -ENODEV;
-			goto __error;
-		}
 		for (i = 0; i < 3; i ++) {
 			if (of_address_to_resource(np, i,
 						   &chip->rsrc[i])) {
@@ -1220,28 +1213,30 @@
 	chip->playback.dma = ioremap(txdma_addr, 0x100);
 	chip->capture.dma = ioremap(rxdma_addr, 0x100);
 	if (chip->model <= PMAC_BURGUNDY) {
-		if (request_irq(np->intrs[0].line, snd_pmac_ctrl_intr, 0,
+		irq = irq_of_parse_and_map(np, 0);
+		if (request_irq(irq, snd_pmac_ctrl_intr, 0,
 				"PMac", (void*)chip)) {
-			snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", np->intrs[0].line);
+			snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n",
+				   irq);
 			err = -EBUSY;
 			goto __error;
 		}
-		chip->irq = np->intrs[0].line;
+		chip->irq = irq;
 	}
-	if (request_irq(np->intrs[1].line, snd_pmac_tx_intr, 0,
-			"PMac Output", (void*)chip)) {
-		snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", np->intrs[1].line);
+	irq = irq_of_parse_and_map(np, 1);
+	if (request_irq(irq, snd_pmac_tx_intr, 0, "PMac Output", (void*)chip)){
+		snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
 		err = -EBUSY;
 		goto __error;
 	}
-	chip->tx_irq = np->intrs[1].line;
-	if (request_irq(np->intrs[2].line, snd_pmac_rx_intr, 0,
-			"PMac Input", (void*)chip)) {
-		snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", np->intrs[2].line);
+	chip->tx_irq = irq;
+	irq = irq_of_parse_and_map(np, 2);
+	if (request_irq(irq, snd_pmac_rx_intr, 0, "PMac Input", (void*)chip)) {
+		snd_printk(KERN_ERR "pmac: unable to grab IRQ %d\n", irq);
 		err = -EBUSY;
 		goto __error;
 	}
-	chip->rx_irq = np->intrs[2].line;
+	chip->rx_irq = irq;
 
 	snd_pmac_sound_feature(chip, 1);
 
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 70e4ebc..692c611 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -1121,7 +1121,7 @@
 	DBG("(I) GPIO device %s found, offset: %x, active state: %d !\n",
 	    device, gp->addr, gp->active_state);
 
-	return (node->n_intrs > 0) ? node->intrs[0].line : 0;
+	return irq_of_parse_and_map(node, 0);
 }
 
 /* reset audio */
@@ -1264,16 +1264,16 @@
 				    &mix->line_mute, 1);
 	irq = tumbler_find_device("headphone-detect",
 				  NULL, &mix->hp_detect, 0);
-	if (irq < 0)
+	if (irq <= NO_IRQ)
 		irq = tumbler_find_device("headphone-detect",
 					  NULL, &mix->hp_detect, 1);
-	if (irq < 0)
+	if (irq <= NO_IRQ)
 		irq = tumbler_find_device("keywest-gpio15",
 					  NULL, &mix->hp_detect, 1);
 	mix->headphone_irq = irq;
  	irq = tumbler_find_device("line-output-detect",
 				  NULL, &mix->line_detect, 0);
- 	if (irq < 0)
+ 	if (irq <= NO_IRQ)
 		irq = tumbler_find_device("line-output-detect",
 					  NULL, &mix->line_detect, 1);
 	mix->lineout_irq = irq;