Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
[netdrvr] atl1: fix build
pasemi_mac: Use local-mac-address instead of mac-address if available
pasemi_mac: PHY support
pasemi_mac: Add msglevel support and "debug" module param
pasemi_mac: Logic cleanup / rx performance improvements
pasemi_mac: Minor cleanup / define fixes
pasemi_mac: Add SKB reuse / copy-break
pasemi_mac: Timer and interrupt fixes
pasemi_mac: Abstract and fix up interrupt restart routines
pasemi_mac: Move the IRQ mapping from the PCI layer to the driver
tc35815: Remove unnecessary skb->dev assignment
drivers/net/dm9000: Convert to generic boolean
AT91RM9200 Ethernet: Fix multicast addressing
AT91RM9200 Ethernet: Support additional PHYs
PCMCIA-NETDEV : xirc2ps_cs: bugfix of multicast code
sky2: re-enable 88E8056 for most motherboards
MIPS: Drop unnecessary CONFIG_ISA from RBTX49XX
ne: MIPS: Use platform_driver for ne on RBTX49XX
ne: Add NEEDS_PORTLIST to control ISA auto-probe
ne: Misc fixes for platform driver.
...
Fix conflict in drivers/net/pasemi_mac.c (get_property() got renamed to
of_get_property()) manually.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7441a2c..b7cb048 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -784,7 +784,6 @@
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select I8259
- select ISA
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
@@ -806,7 +805,6 @@
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select I8259
- select ISA
select SWAP_IO_SPACE
select SYS_HAS_CPU_TX49XX
select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index 29e0df9..7d0f217 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -245,7 +245,6 @@
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
-CONFIG_ISA=y
CONFIG_MMU=y
#
@@ -573,7 +572,6 @@
#
# Plug and Play support
#
-# CONFIG_PNP is not set
# CONFIG_PNPACPI is not set
#
@@ -658,7 +656,6 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
@@ -677,11 +674,6 @@
# CONFIG_ATA is not set
#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -742,37 +734,20 @@
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
-CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EWRK3 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
CONFIG_NE2000=y
-# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
@@ -833,8 +808,6 @@
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
#
# Wireless 802.11b ISA/PCI cards support
@@ -920,9 +893,6 @@
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -1072,7 +1042,6 @@
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index 0f7576d..a0c11ef 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -1049,3 +1049,22 @@
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
device_initcall(toshiba_rbtx4927_rtc_init);
+
+static int __init rbtx4927_ne_init(void)
+{
+ static struct resource __initdata res[] = {
+ {
+ .start = RBTX4927_RTL_8019_BASE,
+ .end = RBTX4927_RTL_8019_BASE + 0x20 - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RBTX4927_RTL_8019_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+ struct platform_device *dev =
+ platform_device_register_simple("ne", -1,
+ res, ARRAY_SIZE(res));
+ return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+device_initcall(rbtx4927_ne_init);
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
index 66163ba..f5d1ce7 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -20,6 +20,7 @@
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/pm.h>
+#include <linux/platform_device.h>
#include <asm/wbflush.h>
#include <asm/reboot.h>
@@ -1037,3 +1038,22 @@
__initcall(tx4938_spi_proc_setup);
#endif
+
+static int __init rbtx4938_ne_init(void)
+{
+ struct resource res[] = {
+ {
+ .start = RBTX4938_RTL_8019_BASE,
+ .end = RBTX4938_RTL_8019_BASE + 0x20 - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RBTX4938_RTL_8019_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+ struct platform_device *dev =
+ platform_device_register_simple("ne", -1,
+ res, ARRAY_SIZE(res));
+ return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+device_initcall(rbtx4938_ne_init);
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index 056243d..bbc6dfc 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -173,19 +173,6 @@
}
-void __devinit pas_pci_irq_fixup(struct pci_dev *dev)
-{
- /* DMA is special, 84 interrupts (128 -> 211), all but 128
- * need to be mapped by hand here.
- */
- if (dev->vendor == 0x1959 && dev->device == 0xa007) {
- int i;
- for (i = 129; i < 212; i++)
- irq_create_mapping(NULL, i);
- }
-}
-
-
void __init pas_pci_init(void)
{
struct device_node *np, *root;
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 38f107b..c5a3f61 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -251,5 +251,4 @@
.calibrate_decr = generic_calibrate_decr,
.progress = pas_progress,
.machine_check_exception = pas_machine_check_handler,
- .pci_irq_fixup = pas_pci_irq_fixup,
};
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 279ec625..b86ccd2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1104,7 +1104,7 @@
config NE2000
tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R
+ depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
@@ -2488,6 +2488,7 @@
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC64 && PCI
+ select PHYLIB
help
This driver supports the on-chip 1/10Gbit Ethernet controller on
PA Semi's PWRficient line of chips.
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 152fa7a..ef2cc80 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -225,6 +225,16 @@
if (!(phy & ((1 << 2) | 1)))
goto done;
}
+ else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
+ read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy);
+ if (!(phy & ((1 << 2) | 1)))
+ goto done;
+ }
+ else if (lp->phy_type == MII_DP83848_ID) {
+ read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
+ if (!(phy & (1 << 7)))
+ goto done;
+ }
update_linkspeed(dev, 0);
@@ -280,6 +290,19 @@
dsintr = (1 << 10) | ( 1 << 8);
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
}
+ else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
+ read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
+ dsintr = dsintr | 0x500; /* set bits 8, 10 */
+ write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
+ }
+ else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
+ read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
+ dsintr = dsintr | 0x3c; /* set bits 2..5 */
+ write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
+ read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
+ dsintr = dsintr | 0x3; /* set bits 0,1 */
+ write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
+ }
disable_mdi();
spin_unlock_irq(&lp->lock);
@@ -323,6 +346,19 @@
dsintr = ~((1 << 10) | (1 << 8));
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
}
+ else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
+ read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
+ dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
+ write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
+ }
+ else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
+ read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
+ dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
+ write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
+ read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
+ dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
+ write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
+ }
disable_mdi();
spin_unlock_irq(&lp->lock);
@@ -535,8 +571,8 @@
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
- at91_emac_write(AT91_EMAC_HSH, mc_filter[0]);
- at91_emac_write(AT91_EMAC_HSL, mc_filter[1]);
+ at91_emac_write(AT91_EMAC_HSL, mc_filter[0]);
+ at91_emac_write(AT91_EMAC_HSH, mc_filter[1]);
}
/*
@@ -1062,10 +1098,16 @@
printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
else if (phy_type == MII_DP83847_ID)
printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
+ else if (phy_type == MII_DP83848_ID)
+ printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
else if (phy_type == MII_AC101L_ID)
printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
else if (phy_type == MII_KS8721_ID)
printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
+ else if (phy_type == MII_T78Q21x3_ID)
+ printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
+ else if (phy_type == MII_LAN83C185_ID)
+ printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
return 0;
}
@@ -1103,8 +1145,11 @@
case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
case MII_DP83847_ID: /* National Semiconductor DP83847: */
+ case MII_DP83848_ID: /* National Semiconductor DP83848: */
case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
+ case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
+ case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
break;
}
diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/arm/at91_ether.h
index b6b665d..a38fd2d 100644
--- a/drivers/net/arm/at91_ether.h
+++ b/drivers/net/arm/at91_ether.h
@@ -17,39 +17,46 @@
/* Davicom 9161 PHY */
-#define MII_DM9161_ID 0x0181b880
-#define MII_DM9161A_ID 0x0181b8a0
-
-/* Davicom specific registers */
-#define MII_DSCR_REG 16
-#define MII_DSCSR_REG 17
-#define MII_DSINTR_REG 21
+#define MII_DM9161_ID 0x0181b880
+#define MII_DM9161A_ID 0x0181b8a0
+#define MII_DSCR_REG 16
+#define MII_DSCSR_REG 17
+#define MII_DSINTR_REG 21
/* Intel LXT971A PHY */
-#define MII_LXT971A_ID 0x001378E0
-
-/* Intel specific registers */
-#define MII_ISINTE_REG 18
-#define MII_ISINTS_REG 19
-#define MII_LEDCTRL_REG 20
+#define MII_LXT971A_ID 0x001378E0
+#define MII_ISINTE_REG 18
+#define MII_ISINTS_REG 19
+#define MII_LEDCTRL_REG 20
/* Realtek RTL8201 PHY */
-#define MII_RTL8201_ID 0x00008200
+#define MII_RTL8201_ID 0x00008200
/* Broadcom BCM5221 PHY */
-#define MII_BCM5221_ID 0x004061e0
-
-/* Broadcom specific registers */
-#define MII_BCMINTR_REG 26
+#define MII_BCM5221_ID 0x004061e0
+#define MII_BCMINTR_REG 26
/* National Semiconductor DP83847 */
-#define MII_DP83847_ID 0x20005c30
+#define MII_DP83847_ID 0x20005c30
+
+/* National Semiconductor DP83848 */
+#define MII_DP83848_ID 0x20005c90
+#define MII_DPPHYSTS_REG 16
+#define MII_DPMICR_REG 17
+#define MII_DPMISR_REG 18
/* Altima AC101L PHY */
-#define MII_AC101L_ID 0x00225520
+#define MII_AC101L_ID 0x00225520
/* Micrel KS8721 PHY */
-#define MII_KS8721_ID 0x00221610
+#define MII_KS8721_ID 0x00221610
+
+/* Teridian 78Q2123/78Q2133 */
+#define MII_T78Q21x3_ID 0x000e7230
+#define MII_T78Q21INT_REG 17
+
+/* SMSC LAN83C185 */
+#define MII_LAN83C185_ID 0x0007C0A0
/* ........................................................................ */
diff --git a/drivers/net/atl1/atl1_ethtool.c b/drivers/net/atl1/atl1_ethtool.c
index c11c277..1f616c5 100644
--- a/drivers/net/atl1/atl1_ethtool.c
+++ b/drivers/net/atl1/atl1_ethtool.c
@@ -156,8 +156,7 @@
u16 old_media_type = hw->media_type;
if (netif_running(adapter->netdev)) {
- printk(KERN_DEBUG "%s: ethtool shutting down adapter\n",
- atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n");
atl1_down(adapter);
}
@@ -166,9 +165,8 @@
else {
if (ecmd->speed == SPEED_1000) {
if (ecmd->duplex != DUPLEX_FULL) {
- printk(KERN_WARNING
- "%s: can't force to 1000M half duplex\n",
- atl1_driver_name);
+ dev_warn(&adapter->pdev->dev,
+ "can't force to 1000M half duplex\n");
ret_val = -EINVAL;
goto exit_sset;
}
@@ -206,9 +204,8 @@
}
if (atl1_phy_setup_autoneg_adv(hw)) {
ret_val = -EINVAL;
- printk(KERN_WARNING
- "%s: invalid ethtool speed/duplex setting\n",
- atl1_driver_name);
+ dev_warn(&adapter->pdev->dev,
+ "invalid ethtool speed/duplex setting\n");
goto exit_sset;
}
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
@@ -239,12 +236,10 @@
hw->media_type = old_media_type;
if (netif_running(adapter->netdev)) {
- printk(KERN_DEBUG "%s: ethtool starting adapter\n",
- atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n");
atl1_up(adapter);
} else if (!ret_val) {
- printk(KERN_DEBUG "%s: ethtool resetting adapter\n",
- atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n");
atl1_reset(adapter);
}
return ret_val;
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c
index 69482e0..ef886bd 100644
--- a/drivers/net/atl1/atl1_hw.c
+++ b/drivers/net/atl1/atl1_hw.c
@@ -2,20 +2,20 @@
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 Chris Snook <csnook@redhat.com>
* Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
- *
+ *
* Derived from Intel e1000 driver
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
- *
+ *
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
- *
+ *
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
@@ -38,12 +38,13 @@
*/
s32 atl1_reset_hw(struct atl1_hw *hw)
{
+ struct pci_dev *pdev = hw->back->pdev;
u32 icr;
int i;
- /*
+ /*
* Clear Interrupt mask to stop board from generating
- * interrupts & Clear any pending interrupt events
+ * interrupts & Clear any pending interrupt events
*/
/*
* iowrite32(0, hw->hw_addr + REG_IMR);
@@ -74,7 +75,7 @@
}
if (icr) {
- printk (KERN_DEBUG "icr = %x\n", icr);
+ dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
return icr;
}
@@ -136,8 +137,8 @@
int i;
val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
- MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
- MDIO_CLK_SEL_SHIFT;
+ MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
+ MDIO_CLK_SEL_SHIFT;
iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
ioread32(hw->hw_addr + REG_MDIO_CTRL);
@@ -204,7 +205,7 @@
/*
* get_permanent_address
- * return 0 if get valid mac address,
+ * return 0 if get valid mac address,
*/
static int atl1_get_permanent_address(struct atl1_hw *hw)
{
@@ -301,7 +302,7 @@
}
/*
- * Reads the adapter's MAC address from the EEPROM
+ * Reads the adapter's MAC address from the EEPROM
* hw - Struct containing variables accessed by shared code
*/
s32 atl1_read_mac_addr(struct atl1_hw *hw)
@@ -437,6 +438,7 @@
*/
static s32 atl1_phy_reset(struct atl1_hw *hw)
{
+ struct pci_dev *pdev = hw->back->pdev;
s32 ret_val;
u16 phy_data;
@@ -468,8 +470,7 @@
u32 val;
int i;
/* pcie serdes link may be down! */
- printk(KERN_DEBUG "%s: autoneg caused pcie phy link down\n",
- atl1_driver_name);
+ dev_dbg(&pdev->dev, "pcie phy link down\n");
for (i = 0; i < 25; i++) {
msleep(1);
@@ -479,9 +480,7 @@
}
if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
- printk(KERN_WARNING
- "%s: pcie link down at least for 25ms\n",
- atl1_driver_name);
+ dev_warn(&pdev->dev, "pcie link down at least 25ms\n");
return ret_val;
}
}
@@ -571,6 +570,7 @@
*/
static s32 atl1_setup_link(struct atl1_hw *hw)
{
+ struct pci_dev *pdev = hw->back->pdev;
s32 ret_val;
/*
@@ -581,15 +581,13 @@
*/
ret_val = atl1_phy_setup_autoneg_adv(hw);
if (ret_val) {
- printk(KERN_DEBUG "%s: error setting up autonegotiation\n",
- atl1_driver_name);
+ dev_dbg(&pdev->dev, "error setting up autonegotiation\n");
return ret_val;
}
/* SW.Reset , En-Auto-Neg if needed */
ret_val = atl1_phy_reset(hw);
if (ret_val) {
- printk(KERN_DEBUG "%s: error resetting the phy\n",
- atl1_driver_name);
+ dev_dbg(&pdev->dev, "error resetting phy\n");
return ret_val;
}
hw->phy_configured = true;
@@ -631,7 +629,7 @@
* Performs basic configuration of the adapter.
* hw - Struct containing variables accessed by shared code
* Assumes that the controller has previously been reset and is in a
- * post-reset uninitialized state. Initializes multicast table,
+ * post-reset uninitialized state. Initializes multicast table,
* and Calls routines to setup link
* Leaves the transmit and receive units disabled and uninitialized.
*/
@@ -669,6 +667,7 @@
*/
s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
{
+ struct pci_dev *pdev = hw->back->pdev;
s32 ret_val;
u16 phy_data;
@@ -691,8 +690,7 @@
*speed = SPEED_10;
break;
default:
- printk(KERN_DEBUG "%s: error getting speed\n",
- atl1_driver_name);
+ dev_dbg(&pdev->dev, "error getting speed\n");
return ATL1_ERR_PHY_SPEED;
break;
}
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 4b1d4d1..d28f88b 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -188,8 +188,7 @@
size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
if (unlikely(!tpd_ring->buffer_info)) {
- printk(KERN_WARNING "%s: kzalloc failed , size = D%d\n",
- atl1_driver_name, size);
+ dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size);
goto err_nomem;
}
rfd_ring->buffer_info =
@@ -207,9 +206,7 @@
ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
&ring_header->dma);
if (unlikely(!ring_header->desc)) {
- printk(KERN_WARNING
- "%s: pci_alloc_consistent failed, size = D%d\n",
- atl1_driver_name, size);
+ dev_err(&pdev->dev, "pci_alloc_consistent failed\n");
goto err_nomem;
}
@@ -373,8 +370,7 @@
if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
ERR_FLAG_CODE | ERR_FLAG_OV)) {
adapter->hw_csum_err++;
- printk(KERN_DEBUG "%s: rx checksum error\n",
- atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev, "rx checksum error\n");
return;
}
}
@@ -393,8 +389,9 @@
}
/* IPv4, but hardware thinks its checksum is wrong */
- printk(KERN_DEBUG "%s: hw csum wrong pkt_flag:%x, err_flag:%x\n",
- atl1_driver_name, rrd->pkt_flg, rrd->err_flg);
+ dev_dbg(&adapter->pdev->dev,
+ "hw csum wrong, pkt_flag:%x, err_flag:%x\n",
+ rrd->pkt_flg, rrd->err_flg);
skb->ip_summed = CHECKSUM_COMPLETE;
skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum);
adapter->hw_csum_err++;
@@ -507,14 +504,13 @@
/* rrd seems to be bad */
if (unlikely(i-- > 0)) {
/* rrd may not be DMAed completely */
- printk(KERN_DEBUG
- "%s: RRD may not be DMAed completely\n",
- atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev,
+ "incomplete RRD DMA transfer\n");
udelay(1);
goto chk_rrd;
}
/* bad rrd */
- printk(KERN_DEBUG "%s: bad RRD\n", atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev, "bad RRD\n");
/* see if update RFD index */
if (rrd->num_buf > 1) {
u16 num_buf;
@@ -685,8 +681,8 @@
/* notify upper layer link down ASAP */
if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
if (netif_carrier_ok(netdev)) { /* old link state: Up */
- printk(KERN_INFO "%s: %s link is down\n",
- atl1_driver_name, netdev->name);
+ dev_info(&adapter->pdev->dev, "%s link is down\n",
+ netdev->name);
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
@@ -731,8 +727,8 @@
/* check if PCIE PHY Link down */
if (status & ISR_PHY_LINKDOWN) {
- printk(KERN_DEBUG "%s: pcie phy link down %x\n",
- atl1_driver_name, status);
+ dev_dbg(&adapter->pdev->dev, "pcie phy link down %x\n",
+ status);
if (netif_running(adapter->netdev)) { /* reset MAC */
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
schedule_work(&adapter->pcie_dma_to_rst_task);
@@ -742,9 +738,9 @@
/* check if DMA read/write error ? */
if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
- printk(KERN_DEBUG
- "%s: pcie DMA r/w error (status = 0x%x)\n",
- atl1_driver_name, status);
+ dev_dbg(&adapter->pdev->dev,
+ "pcie DMA r/w error (status = 0x%x)\n",
+ status);
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
schedule_work(&adapter->pcie_dma_to_rst_task);
return IRQ_HANDLED;
@@ -762,14 +758,13 @@
/* rx exception */
if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN |
+ ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
+ ISR_HOST_RRD_OV | ISR_CMB_RX))) {
+ if (status & (ISR_RXF_OV | ISR_RFD_UNRUN |
ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
- ISR_HOST_RRD_OV | ISR_CMB_RX))) {
- if (status &
- (ISR_RXF_OV | ISR_RFD_UNRUN | ISR_RRD_OV |
- ISR_HOST_RFD_UNRUN | ISR_HOST_RRD_OV))
- printk(KERN_INFO
- "%s: rx exception: status = 0x%x\n",
- atl1_driver_name, status);
+ ISR_HOST_RRD_OV))
+ dev_dbg(&adapter->pdev->dev,
+ "rx exception, ISR = 0x%x\n", status);
atl1_intr_rx(adapter);
}
@@ -874,8 +869,7 @@
atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
if (!(phy_data & BMSR_LSTATUS)) { /* link down */
if (netif_carrier_ok(netdev)) { /* old link state: Up */
- printk(KERN_INFO "%s: link is down\n",
- atl1_driver_name);
+ dev_info(&adapter->pdev->dev, "link is down\n");
adapter->link_speed = SPEED_0;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
@@ -918,11 +912,11 @@
adapter->link_speed = speed;
adapter->link_duplex = duplex;
atl1_setup_mac_ctrl(adapter);
- printk(KERN_INFO "%s: %s link is up %d Mbps %s\n",
- atl1_driver_name, netdev->name,
- adapter->link_speed,
- adapter->link_duplex ==
- FULL_DUPLEX ? "full duplex" : "half duplex");
+ dev_info(&adapter->pdev->dev,
+ "%s link is up %d Mbps %s\n",
+ netdev->name, adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "full duplex" : "half duplex");
}
if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
netif_carrier_on(netdev);
@@ -1330,8 +1324,8 @@
cso = skb_transport_offset(skb);
css = cso + skb->csum_offset;
if (unlikely(cso & 0x1)) {
- printk(KERN_DEBUG "%s: payload offset != even number\n",
- atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev,
+ "payload offset not an even number\n");
return -1;
}
csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) <<
@@ -1579,7 +1573,7 @@
if (!spin_trylock(&adapter->lock)) {
/* Can't get lock - tell upper layer to requeue */
local_irq_restore(flags);
- printk(KERN_DEBUG "%s: TX locked\n", atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev, "tx locked\n");
return NETDEV_TX_LOCKED;
}
@@ -1587,7 +1581,7 @@
/* not enough descriptors */
netif_stop_queue(netdev);
spin_unlock_irqrestore(&adapter->lock, flags);
- printk(KERN_DEBUG "%s: TX busy\n", atl1_driver_name);
+ dev_dbg(&adapter->pdev->dev, "tx busy\n");
return NETDEV_TX_BUSY;
}
@@ -1841,8 +1835,7 @@
if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
- printk(KERN_WARNING "%s: invalid MTU setting\n",
- atl1_driver_name);
+ dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
return -EINVAL;
}
@@ -2136,9 +2129,7 @@
if (err) {
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
- printk(KERN_DEBUG
- "%s: no usable DMA configuration, aborting\n",
- atl1_driver_name);
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_dma;
}
pci_using_64 = false;
@@ -2175,7 +2166,9 @@
goto err_pci_iomap;
}
/* get device revision number */
- adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + (REG_MASTER_CTRL + 2));
+ adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
+ (REG_MASTER_CTRL + 2));
+ dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
/* set default ring resource counts */
adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
@@ -2466,8 +2459,6 @@
*/
static int __init atl1_init_module(void)
{
- printk(KERN_INFO "%s - version %s\n", atl1_driver_string, DRIVER_VERSION);
- printk(KERN_INFO "%s\n", atl1_copyright);
return pci_register_driver(&atl1_driver);
}
diff --git a/drivers/net/atl1/atl1_param.c b/drivers/net/atl1/atl1_param.c
index bcd0bd89..4246bb9 100644
--- a/drivers/net/atl1/atl1_param.c
+++ b/drivers/net/atl1/atl1_param.c
@@ -23,6 +23,7 @@
#include <linux/types.h>
#include <linux/moduleparam.h>
+#include <linux/pci.h>
#include "atl1.h"
/*
@@ -93,7 +94,7 @@
} arg;
};
-static int __devinit atl1_validate_option(int *value, struct atl1_option *opt)
+static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
@@ -104,19 +105,17 @@
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- printk(KERN_INFO "%s: %s Enabled\n", atl1_driver_name,
- opt->name);
+ dev_info(&pdev->dev, "%s enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
- printk(KERN_INFO "%s: %s Disabled\n", atl1_driver_name,
- opt->name);
+ dev_info(&pdev->dev, "%s disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- printk(KERN_INFO "%s: %s set to %i\n",
- atl1_driver_name, opt->name, *value);
+ dev_info(&pdev->dev, "%s set to %i\n", opt->name,
+ *value);
return 0;
}
break;
@@ -128,8 +127,8 @@
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
- printk(KERN_INFO "%s: %s\n",
- atl1_driver_name, ent->str);
+ dev_info(&pdev->dev, "%s\n",
+ ent->str);
return 0;
}
}
@@ -140,8 +139,8 @@
break;
}
- printk(KERN_INFO "%s: invalid %s specified (%i) %s\n",
- atl1_driver_name, opt->name, *value, opt->err);
+ dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
+ opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
@@ -157,12 +156,11 @@
*/
void __devinit atl1_check_options(struct atl1_adapter *adapter)
{
+ struct pci_dev *pdev = adapter->pdev;
int bd = adapter->bd_number;
if (bd >= ATL1_MAX_NIC) {
- printk(KERN_NOTICE "%s: warning: no configuration for board #%i\n",
- atl1_driver_name, bd);
- printk(KERN_NOTICE "%s: using defaults for all values\n",
- atl1_driver_name);
+ dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
+ dev_notice(&pdev->dev, "using defaults for all values\n");
}
{ /* Interrupt Moderate Timer */
struct atl1_option opt = {
@@ -177,7 +175,7 @@
int val;
if (num_int_mod_timer > bd) {
val = int_mod_timer[bd];
- atl1_validate_option(&val, &opt);
+ atl1_validate_option(&val, &opt, pdev);
adapter->imt = (u16) val;
} else
adapter->imt = (u16) (opt.def);
@@ -197,7 +195,7 @@
int val;
if (num_flash_vendor > bd) {
val = flash_vendor[bd];
- atl1_validate_option(&val, &opt);
+ atl1_validate_option(&val, &opt, pdev);
adapter->hw.flash_vendor = (u8) val;
} else
adapter->hw.flash_vendor = (u8) (opt.def);
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 8cc1174..264fa0e 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -77,9 +77,6 @@
#define DM9000_PHY 0x40 /* PHY address 0x01 */
-#define TRUE 1
-#define FALSE 0
-
#define CARDNAME "dm9000"
#define PFX CARDNAME ": "
@@ -601,7 +598,7 @@
printk("%s: not found (%d).\n", CARDNAME, ret);
dm9000_release_board(pdev, db);
- kfree(ndev);
+ free_netdev(ndev);
return ret;
}
@@ -896,7 +893,7 @@
struct dm9000_rxhdr rxhdr;
struct sk_buff *skb;
u8 rxbyte, *rdptr;
- int GoodPacket;
+ bool GoodPacket;
int RxLen;
/* Check packet ready or not */
@@ -918,7 +915,7 @@
return;
/* A packet ready now & Get status/length */
- GoodPacket = TRUE;
+ GoodPacket = true;
writeb(DM9000_MRCMD, db->io_addr);
(db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr));
@@ -927,7 +924,7 @@
/* Packet Status check */
if (RxLen < 0x40) {
- GoodPacket = FALSE;
+ GoodPacket = false;
PRINTK1("Bad Packet received (runt)\n");
}
@@ -936,7 +933,7 @@
}
if (rxhdr.RxStatus & 0xbf00) {
- GoodPacket = FALSE;
+ GoodPacket = false;
if (rxhdr.RxStatus & 0x100) {
PRINTK1("fifo error\n");
db->stats.rx_fifo_errors++;
@@ -1193,7 +1190,7 @@
unregister_netdev(ndev);
dm9000_release_board(pdev, (board_info_t *) ndev->priv);
- kfree(ndev); /* free device structure */
+ free_netdev(ndev); /* free device structure */
PRINTK1("clean_module() exit\n");
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index a1bd2d8..f6e0cb1 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -1803,10 +1803,10 @@
u32 tmp;
if ((skb->protocol == htons(ETH_P_IP)) &&
- (skb->nh.iph->protocol == IPPROTO_TCP)) {
- tcp = (struct tcphdr*)(skb->nh.raw + (skb->nh.iph->ihl * 4));
+ (ip_hdr(skb)->protocol == IPPROTO_TCP)) {
+ tcp = (struct tcphdr*)(skb_network_header(skb) + (ip_hdr(skb)->ihl * 4));
tmp = (tcp->source + (tcp->dest << 16)) % 31;
- tmp += skb->nh.iph->daddr % 31;
+ tmp += ip_hdr(skb)->daddr % 31;
return tmp % num_qps;
}
else
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 16e3c43..5d14be7 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -290,6 +290,8 @@
#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
+static void myri10ge_set_multicast_list(struct net_device *dev);
+
static inline void put_be32(__be32 val, __be32 __iomem * p)
{
__raw_writel((__force __u32) val, (__force void __iomem *)p);
@@ -353,6 +355,8 @@
return 0;
} else if (result == MXGEFW_CMD_UNKNOWN) {
return -ENOSYS;
+ } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
+ return -E2BIG;
} else {
dev_err(&mgp->pdev->dev,
"command %d failed, result = %d\n",
@@ -712,14 +716,78 @@
mgp->dev->name);
}
+static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
+{
+ struct myri10ge_cmd cmd;
+ int status;
+ u32 len;
+ struct page *dmatest_page;
+ dma_addr_t dmatest_bus;
+ char *test = " ";
+
+ dmatest_page = alloc_page(GFP_KERNEL);
+ if (!dmatest_page)
+ return -ENOMEM;
+ dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
+
+ /* Run a small DMA test.
+ * The magic multipliers to the length tell the firmware
+ * to do DMA read, write, or read+write tests. The
+ * results are returned in cmd.data0. The upper 16
+ * bits or the return is the number of transfers completed.
+ * The lower 16 bits is the time in 0.5us ticks that the
+ * transfers took to complete.
+ */
+
+ len = mgp->tx.boundary;
+
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x10000;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "read";
+ goto abort;
+ }
+ mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x1;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "write";
+ goto abort;
+ }
+ mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
+
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
+ cmd.data2 = len * 0x10001;
+ status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
+ if (status != 0) {
+ test = "read/write";
+ goto abort;
+ }
+ mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
+ (cmd.data0 & 0xffff);
+
+abort:
+ pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
+ put_page(dmatest_page);
+
+ if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
+ dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
+ test, status);
+
+ return status;
+}
+
static int myri10ge_reset(struct myri10ge_priv *mgp)
{
struct myri10ge_cmd cmd;
int status;
size_t bytes;
- u32 len;
- struct page *dmatest_page;
- dma_addr_t dmatest_bus;
/* try to send a reset command to the card to see if it
* is alive */
@@ -729,11 +797,8 @@
dev_err(&mgp->pdev->dev, "failed reset\n");
return -ENXIO;
}
- dmatest_page = alloc_page(GFP_KERNEL);
- if (!dmatest_page)
- return -ENOMEM;
- dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
- DMA_BIDIRECTIONAL);
+
+ (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
/* Now exchange information about interrupts */
@@ -761,52 +826,6 @@
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
- /* Run a small DMA test.
- * The magic multipliers to the length tell the firmware
- * to do DMA read, write, or read+write tests. The
- * results are returned in cmd.data0. The upper 16
- * bits or the return is the number of transfers completed.
- * The lower 16 bits is the time in 0.5us ticks that the
- * transfers took to complete.
- */
-
- len = mgp->tx.boundary;
-
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
- cmd.data2 = len * 0x10000;
- status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
- if (status == 0)
- mgp->read_dma = ((cmd.data0 >> 16) * len * 2) /
- (cmd.data0 & 0xffff);
- else
- dev_warn(&mgp->pdev->dev, "DMA read benchmark failed: %d\n",
- status);
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
- cmd.data2 = len * 0x1;
- status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
- if (status == 0)
- mgp->write_dma = ((cmd.data0 >> 16) * len * 2) /
- (cmd.data0 & 0xffff);
- else
- dev_warn(&mgp->pdev->dev, "DMA write benchmark failed: %d\n",
- status);
-
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
- cmd.data2 = len * 0x10001;
- status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
- if (status == 0)
- mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
- (cmd.data0 & 0xffff);
- else
- dev_warn(&mgp->pdev->dev,
- "DMA read/write benchmark failed: %d\n", status);
-
- pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
- put_page(dmatest_page);
-
memset(mgp->rx_done.entry, 0, bytes);
/* reset mcp/driver shared state back to 0 */
@@ -820,10 +839,8 @@
mgp->rx_done.cnt = 0;
mgp->link_changes = 0;
status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
- myri10ge_change_promisc(mgp, 0, 0);
myri10ge_change_pause(mgp, mgp->pause);
- if (mgp->adopted_rx_filter_bug)
- (void)myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
+ myri10ge_set_multicast_list(mgp->dev);
return status;
}
@@ -1355,7 +1372,9 @@
"tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
"wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
"link_changes", "link_up", "dropped_link_overflow",
- "dropped_link_error_or_filtered", "dropped_multicast_filtered",
+ "dropped_link_error_or_filtered",
+ "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
+ "dropped_unicast_filtered", "dropped_multicast_filtered",
"dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
"dropped_no_big_buffer"
};
@@ -1412,6 +1431,11 @@
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow);
data[i++] =
(unsigned int)ntohl(mgp->fw_stats->dropped_link_error_or_filtered);
+ data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_pause);
+ data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_phy);
+ data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_crc32);
+ data[i++] =
+ (unsigned int)ntohl(mgp->fw_stats->dropped_unicast_filtered);
data[i++] =
(unsigned int)ntohl(mgp->fw_stats->dropped_multicast_filtered);
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_runt);
@@ -2276,7 +2300,7 @@
myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
/* This firmware is known to not support multicast */
- if (!mgp->fw_multicast_support || mgp->adopted_rx_filter_bug)
+ if (!mgp->fw_multicast_support)
return;
/* Disable multicast filtering */
@@ -2288,7 +2312,7 @@
goto abort;
}
- if (dev->flags & IFF_ALLMULTI) {
+ if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
/* request to disable multicast filtering, so quit here */
return;
}
@@ -2461,8 +2485,6 @@
err_cap |= PCI_ERR_CAP_ECRC_GENE;
pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
- mgp->tx.boundary = 4096;
- mgp->fw_name = myri10ge_fw_aligned;
}
/*
@@ -2484,22 +2506,70 @@
* firmware image, and set tx.boundary to 4KB.
*/
-#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7
-#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa
-#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 0x3510
-#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4 0x351b
-#define PCI_DEVICE_ID_INTEL_E3000_PCIE 0x2779
-#define PCI_DEVICE_ID_INTEL_E3010_PCIE 0x277a
-#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST 0x140
-#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST 0x142
-
-static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
+static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
{
- struct pci_dev *bridge = mgp->pdev->bus->self;
+ struct pci_dev *pdev = mgp->pdev;
+ struct device *dev = &pdev->dev;
+ int cap, status;
+ u16 val;
+ mgp->tx.boundary = 4096;
+ /*
+ * Verify the max read request size was set to 4KB
+ * before trying the test with 4KB.
+ */
+ cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (cap < 64) {
+ dev_err(dev, "Bad PCI_CAP_ID_EXP location %d\n", cap);
+ goto abort;
+ }
+ status = pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &val);
+ if (status != 0) {
+ dev_err(dev, "Couldn't read max read req size: %d\n", status);
+ goto abort;
+ }
+ if ((val & (5 << 12)) != (5 << 12)) {
+ dev_warn(dev, "Max Read Request size != 4096 (0x%x)\n", val);
+ mgp->tx.boundary = 2048;
+ }
+ /*
+ * load the optimized firmware (which assumes aligned PCIe
+ * completions) in order to see if it works on this host.
+ */
+ mgp->fw_name = myri10ge_fw_aligned;
+ status = myri10ge_load_firmware(mgp);
+ if (status != 0) {
+ goto abort;
+ }
+
+ /*
+ * Enable ECRC if possible
+ */
+ myri10ge_enable_ecrc(mgp);
+
+ /*
+ * Run a DMA test which watches for unaligned completions and
+ * aborts on the first one seen.
+ */
+
+ status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
+ if (status == 0)
+ return; /* keep the aligned firmware */
+
+ if (status != -E2BIG)
+ dev_warn(dev, "DMA test failed: %d\n", status);
+ if (status == -ENOSYS)
+ dev_warn(dev, "Falling back to ethp! "
+ "Please install up to date fw\n");
+abort:
+ /* fall back to using the unaligned firmware */
mgp->tx.boundary = 2048;
mgp->fw_name = myri10ge_fw_unaligned;
+}
+
+static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
+{
if (myri10ge_force_firmware == 0) {
int link_width, exp_cap;
u16 lnk;
@@ -2508,8 +2578,6 @@
pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk);
link_width = (lnk >> 4) & 0x3f;
- myri10ge_enable_ecrc(mgp);
-
/* Check to see if Link is less than 8 or if the
* upstream bridge is known to provide aligned
* completions */
@@ -2518,46 +2586,8 @@
link_width);
mgp->tx.boundary = 4096;
mgp->fw_name = myri10ge_fw_aligned;
- } else if (bridge &&
- /* ServerWorks HT2000/HT1000 */
- ((bridge->vendor == PCI_VENDOR_ID_SERVERWORKS
- && bridge->device ==
- PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE)
- /* ServerWorks HT2100 */
- || (bridge->vendor == PCI_VENDOR_ID_SERVERWORKS
- && bridge->device >=
- PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST
- && bridge->device <=
- PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST)
- /* All Intel E3000/E3010 PCIE ports */
- || (bridge->vendor == PCI_VENDOR_ID_INTEL
- && (bridge->device ==
- PCI_DEVICE_ID_INTEL_E3000_PCIE
- || bridge->device ==
- PCI_DEVICE_ID_INTEL_E3010_PCIE))
- /* All Intel 6310/6311/6321ESB PCIE ports */
- || (bridge->vendor == PCI_VENDOR_ID_INTEL
- && bridge->device >=
- PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1
- && bridge->device <=
- PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4)
- /* All Intel E5000 PCIE ports */
- || (bridge->vendor == PCI_VENDOR_ID_INTEL
- && bridge->device >=
- PCI_DEVICE_ID_INTEL_E5000_PCIE23
- && bridge->device <=
- PCI_DEVICE_ID_INTEL_E5000_PCIE47))) {
- dev_info(&mgp->pdev->dev,
- "Assuming aligned completions (0x%x:0x%x)\n",
- bridge->vendor, bridge->device);
- mgp->tx.boundary = 4096;
- mgp->fw_name = myri10ge_fw_aligned;
- } else if (bridge &&
- bridge->vendor == PCI_VENDOR_ID_SGI &&
- bridge->device == 0x4002 /* TIOCE pcie-port */ ) {
- /* this pcie bridge does not support 4K rdma request */
- mgp->tx.boundary = 2048;
- mgp->fw_name = myri10ge_fw_aligned;
+ } else {
+ myri10ge_firmware_probe(mgp);
}
} else {
if (myri10ge_force_firmware == 1) {
@@ -2825,7 +2855,6 @@
status = -ENODEV;
goto abort_with_netdev;
}
- myri10ge_select_firmware(mgp);
/* Find the vendor-specific cap so we can check
* the reboot register later on */
@@ -2919,6 +2948,8 @@
goto abort_with_ioremap;
memset(mgp->rx_done.entry, 0, bytes);
+ myri10ge_select_firmware(mgp);
+
status = myri10ge_load_firmware(mgp);
if (status != 0) {
dev_err(&pdev->dev, "failed to load firmware\n");
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index 29463b3..a1d2a22 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -200,6 +200,13 @@
/* data0, data1 = bus addr,
* data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
* adding new stuff to mcp_irq_data without changing the ABI */
+
+ MXGEFW_CMD_UNALIGNED_TEST,
+ /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
+ * chipset */
+
+ MXGEFW_CMD_UNALIGNED_STATUS
+ /* return data = boolean, true if the chipset is known to be unaligned */
};
enum myri10ge_mcp_cmd_status {
@@ -212,18 +219,27 @@
MXGEFW_CMD_ERROR_HASH_ERROR,
MXGEFW_CMD_ERROR_BAD_PORT,
MXGEFW_CMD_ERROR_RESOURCES,
- MXGEFW_CMD_ERROR_MULTICAST
+ MXGEFW_CMD_ERROR_MULTICAST,
+ MXGEFW_CMD_ERROR_UNALIGNED
};
#define MXGEFW_OLD_IRQ_DATA_LEN 40
struct mcp_irq_data {
/* add new counters at the beginning */
- __be32 future_use[5];
+ __be32 future_use[1];
+ __be32 dropped_pause;
+ __be32 dropped_unicast_filtered;
+ __be32 dropped_bad_crc32;
+ __be32 dropped_bad_phy;
__be32 dropped_multicast_filtered;
/* 40 Bytes */
__be32 send_done_count;
+#define MXGEFW_LINK_DOWN 0
+#define MXGEFW_LINK_UP 1
+#define MXGEFW_LINK_MYRINET 2
+#define MXGEFW_LINK_UNKNOWN 3
__be32 link_up;
__be32 dropped_link_overflow;
__be32 dropped_link_error_or_filtered;
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index a8d7ff2..223e0e6 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -81,6 +81,8 @@
Setting to > 1518 effectively disables this feature. */
static int rx_copybreak;
+static int dspcfg_workaround = 1;
+
/* Used to pass the media type, etc.
Both 'options[]' and 'full_duplex[]' should exist for driver
interoperability.
@@ -139,12 +141,14 @@
module_param(mtu, int, 0);
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
+module_param(dspcfg_workaround, int, 1);
module_param_array(options, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
MODULE_PARM_DESC(debug, "DP8381x default debug level");
MODULE_PARM_DESC(rx_copybreak,
"DP8381x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround");
MODULE_PARM_DESC(options,
"DP8381x: Bits 0-3: media type, bit 17: full duplex");
MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)");
@@ -590,6 +594,7 @@
u32 srr;
/* expected DSPCFG value */
u16 dspcfg;
+ int dspcfg_workaround;
/* parms saved in ethtool format */
u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
u8 duplex; /* Duplex, half or full */
@@ -656,6 +661,56 @@
static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
static const struct ethtool_ops ethtool_ops;
+#define NATSEMI_ATTR(_name) \
+static ssize_t natsemi_show_##_name(struct device *dev, \
+ struct device_attribute *attr, char *buf); \
+ static ssize_t natsemi_set_##_name(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count); \
+ static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name)
+
+#define NATSEMI_CREATE_FILE(_dev, _name) \
+ device_create_file(&_dev->dev, &dev_attr_##_name)
+#define NATSEMI_REMOVE_FILE(_dev, _name) \
+ device_create_file(&_dev->dev, &dev_attr_##_name)
+
+NATSEMI_ATTR(dspcfg_workaround);
+
+static ssize_t natsemi_show_dspcfg_workaround(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct netdev_private *np = netdev_priv(to_net_dev(dev));
+
+ return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off");
+}
+
+static ssize_t natsemi_set_dspcfg_workaround(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct netdev_private *np = netdev_priv(to_net_dev(dev));
+ int new_setting;
+ u32 flags;
+
+ /* Find out the new setting */
+ if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
+ new_setting = 1;
+ else if (!strncmp("off", buf, count - 1)
+ || !strncmp("0", buf, count - 1))
+ new_setting = 0;
+ else
+ return count;
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ np->dspcfg_workaround = new_setting;
+
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ return count;
+}
+
static inline void __iomem *ns_ioaddr(struct net_device *dev)
{
return (void __iomem *) dev->base_addr;
@@ -820,6 +875,7 @@
np->ignore_phy = 1;
else
np->ignore_phy = 0;
+ np->dspcfg_workaround = dspcfg_workaround;
/* Initial port:
* - If configured to ignore the PHY set up for external.
@@ -899,6 +955,9 @@
if (i)
goto err_register_netdev;
+ if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround))
+ goto err_create_file;
+
if (netif_msg_drv(np)) {
printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ",
dev->name, natsemi_pci_info[chip_idx].name, iostart,
@@ -915,6 +974,9 @@
}
return 0;
+ err_create_file:
+ unregister_netdev(dev);
+
err_register_netdev:
iounmap(ioaddr);
@@ -1727,7 +1789,8 @@
* It seems that a reference set for this chip went out with incorrect info,
* and there exist boards that aren't quite right. An unexpected voltage
* drop can cause the PHY to get itself in a weird state (basically reset).
- * NOTE: this only seems to affect revC chips.
+ * NOTE: this only seems to affect revC chips. The user can disable
+ * this check via dspcfg_workaround sysfs option.
* 3) check of death of the RX path due to OOM
*/
static void netdev_timer(unsigned long data)
@@ -1753,10 +1816,10 @@
writew(1, ioaddr+PGSEL);
dspcfg = readw(ioaddr+DSPCFG);
writew(0, ioaddr+PGSEL);
- if (dspcfg != np->dspcfg) {
+ if (np->dspcfg_workaround && dspcfg != np->dspcfg) {
if (!netif_queue_stopped(dev)) {
spin_unlock_irq(&np->lock);
- if (netif_msg_hw(np))
+ if (netif_msg_drv(np))
printk(KERN_NOTICE "%s: possible phy reset: "
"re-initializing\n", dev->name);
disable_irq(dev->irq);
@@ -3157,6 +3220,7 @@
struct net_device *dev = pci_get_drvdata(pdev);
void __iomem * ioaddr = ns_ioaddr(dev);
+ NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
unregister_netdev (dev);
pci_release_regions (pdev);
iounmap(ioaddr);
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index a5c4199..c9f74bf 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -51,14 +51,11 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/jiffies.h>
+#include <linux/platform_device.h>
#include <asm/system.h>
#include <asm/io.h>
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
-#include <asm/tx4938/rbtx4938.h>
-#endif
-
#include "8390.h"
#define DRV_NAME "ne"
@@ -77,8 +74,13 @@
/* Do we have a non std. amount of memory? (in units of 256 byte pages) */
/* #define PACKETBUF_MEMSIZE 0x40 */
+#if !defined(MODULE) && (defined(CONFIG_ISA) || defined(CONFIG_M32R))
+/* Do we need a portlist for the ISA auto-probe ? */
+#define NEEDS_PORTLIST
+#endif
+
/* A zero-terminated list of I/O addresses to be probed at boot. */
-#ifndef MODULE
+#ifdef NEEDS_PORTLIST
static unsigned int netcard_portlist[] __initdata = {
0x300, 0x280, 0x320, 0x340, 0x360, 0x380, 0
};
@@ -146,7 +148,7 @@
# define DCR_VAL 0x49
#endif
-static int ne_probe1(struct net_device *dev, int ioaddr);
+static int ne_probe1(struct net_device *dev, unsigned long ioaddr);
static int ne_probe_isapnp(struct net_device *dev);
static int ne_open(struct net_device *dev);
@@ -184,8 +186,8 @@
static int __init do_ne_probe(struct net_device *dev)
{
- unsigned int base_addr = dev->base_addr;
-#ifndef MODULE
+ unsigned long base_addr = dev->base_addr;
+#ifdef NEEDS_PORTLIST
int orig_irq = dev->irq;
#endif
@@ -201,7 +203,7 @@
if (isapnp_present() && (ne_probe_isapnp(dev) == 0))
return 0;
-#ifndef MODULE
+#ifdef NEEDS_PORTLIST
/* Last resort. The semi-risky ISA auto-probe. */
for (base_addr = 0; netcard_portlist[base_addr] != 0; base_addr++) {
int ioaddr = netcard_portlist[base_addr];
@@ -226,10 +228,6 @@
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
-#ifdef CONFIG_TOSHIBA_RBTX4938
- dev->base_addr = RBTX4938_RTL_8019_BASE;
- dev->irq = RBTX4938_RTL_8019_IRQ;
-#endif
err = do_ne_probe(dev);
if (err)
goto out;
@@ -285,7 +283,7 @@
return -ENODEV;
}
-static int __init ne_probe1(struct net_device *dev, int ioaddr)
+static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
{
int i;
unsigned char SA_prom[32];
@@ -324,7 +322,7 @@
if (ei_debug && version_printed++ == 0)
printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2);
- printk(KERN_INFO "NE*000 ethercard probe at %#3x:", ioaddr);
+ printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr);
/* A user with a poor card that fails to ack the reset, or that
does not have a valid 0x57,0x57 signature can still use this
@@ -516,8 +514,7 @@
}
#endif
- printk("\n%s: %s found at %#x, using IRQ %d.\n",
- dev->name, name, ioaddr, dev->irq);
+ printk("\n");
ei_status.name = name;
ei_status.tx_start_page = start_page;
@@ -547,6 +544,8 @@
ret = register_netdev(dev);
if (ret)
goto out_irq;
+ printk(KERN_INFO "%s: %s found at %#lx, using IRQ %d.\n",
+ dev->name, name, ioaddr, dev->irq);
return 0;
out_irq:
@@ -807,6 +806,87 @@
return;
}
+static int __init ne_drv_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct resource *res;
+ int err, irq;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!res || irq < 0)
+ return -ENODEV;
+
+ dev = alloc_ei_netdev();
+ if (!dev)
+ return -ENOMEM;
+ dev->irq = irq;
+ dev->base_addr = res->start;
+ err = do_ne_probe(dev);
+ if (err) {
+ free_netdev(dev);
+ return err;
+ }
+ platform_set_drvdata(pdev, dev);
+ return 0;
+}
+
+static int __exit ne_drv_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, NE_IO_EXTENT);
+ free_netdev(dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ne_drv_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ if (netif_running(dev))
+ netif_device_detach(dev);
+ return 0;
+}
+
+static int ne_drv_resume(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ if (netif_running(dev)) {
+ ne_reset_8390(dev);
+ NS8390_init(dev, 1);
+ netif_device_attach(dev);
+ }
+ return 0;
+}
+#else
+#define ne_drv_suspend NULL
+#define ne_drv_resume NULL
+#endif
+
+static struct platform_driver ne_driver = {
+ .remove = __exit_p(ne_drv_remove),
+ .suspend = ne_drv_suspend,
+ .resume = ne_drv_resume,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ne_init(void)
+{
+ return platform_driver_probe(&ne_driver, ne_drv_probe);
+}
+
+static void __exit ne_exit(void)
+{
+ platform_driver_unregister(&ne_driver);
+}
#ifdef MODULE
#define MAX_NE_CARDS 4 /* Max number of NE cards per module */
@@ -832,6 +912,7 @@
int __init init_module(void)
{
int this_dev, found = 0;
+ int plat_found = !ne_init();
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
struct net_device *dev = alloc_ei_netdev();
@@ -845,7 +926,7 @@
continue;
}
free_netdev(dev);
- if (found)
+ if (found || plat_found)
break;
if (io[this_dev] != 0)
printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", io[this_dev]);
@@ -853,7 +934,7 @@
printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n");
return -ENXIO;
}
- if (found)
+ if (found || plat_found)
return 0;
return -ENODEV;
}
@@ -871,6 +952,7 @@
{
int this_dev;
+ ne_exit();
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
struct net_device *dev = dev_ne[this_dev];
if (dev) {
@@ -880,4 +962,7 @@
}
}
}
+#else /* MODULE */
+module_init(ne_init);
+module_exit(ne_exit);
#endif /* MODULE */
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 07eb9b2..bc7f3dee 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -33,6 +33,8 @@
#include <linux/tcp.h>
#include <net/checksum.h>
+#include <asm/irq.h>
+
#include "pasemi_mac.h"
@@ -51,6 +53,16 @@
#define RX_RING_SIZE 512
#define TX_RING_SIZE 512
+#define DEFAULT_MSG_ENABLE \
+ (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | \
+ NETIF_MSG_IFDOWN | \
+ NETIF_MSG_IFUP | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR)
+
#define TX_DESC(mac, num) ((mac)->tx->desc[(num) & (TX_RING_SIZE-1)])
#define TX_DESC_INFO(mac, num) ((mac)->tx->desc_info[(num) & (TX_RING_SIZE-1)])
#define RX_DESC(mac, num) ((mac)->rx->desc[(num) & (RX_RING_SIZE-1)])
@@ -59,11 +71,13 @@
#define BUF_SIZE 1646 /* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
-/* XXXOJN these should come out of the device tree some day */
-#define PAS_DMA_CAP_BASE 0xe00d0040
-#define PAS_DMA_CAP_SIZE 0x100
-#define PAS_DMA_COM_BASE 0xe00d0100
-#define PAS_DMA_COM_SIZE 0x100
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
+MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
+
+static int debug = -1; /* -1 == use DEFAULT_MSG_ENABLE as value */
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value");
static struct pasdma_status *dma_status;
@@ -80,7 +94,12 @@
return -ENOENT;
}
- maddr = of_get_property(dn, "mac-address", NULL);
+ maddr = of_get_property(dn, "local-mac-address", NULL);
+
+ /* Fall back to mac-address for older firmware */
+ if (maddr == NULL)
+ maddr = of_get_property(dn, "mac-address", NULL);
+
if (maddr == NULL) {
dev_warn(&pdev->dev,
"no mac address in device tree, not configuring\n");
@@ -277,8 +296,8 @@
for (i = 0; i < RX_RING_SIZE; i++) {
info = &RX_DESC_INFO(mac, i);
dp = &RX_DESC(mac, i);
- if (info->dma) {
- if (info->skb) {
+ if (info->skb) {
+ if (info->dma) {
pci_unmap_single(mac->dma_pdev,
info->dma,
info->skb->len,
@@ -309,82 +328,120 @@
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int i;
int start = mac->rx->next_to_fill;
- unsigned int count;
+ unsigned int limit, count;
- count = (mac->rx->next_to_clean + RX_RING_SIZE -
+ limit = (mac->rx->next_to_clean + RX_RING_SIZE -
mac->rx->next_to_fill) & (RX_RING_SIZE - 1);
/* Check to see if we're doing first-time setup */
if (unlikely(mac->rx->next_to_clean == 0 && mac->rx->next_to_fill == 0))
- count = RX_RING_SIZE;
+ limit = RX_RING_SIZE;
- if (count <= 0)
+ if (limit <= 0)
return;
- for (i = start; i < start + count; i++) {
+ i = start;
+ for (count = limit; count; count--) {
struct pasemi_mac_buffer *info = &RX_DESC_INFO(mac, i);
u64 *buff = &RX_BUFF(mac, i);
struct sk_buff *skb;
dma_addr_t dma;
- skb = dev_alloc_skb(BUF_SIZE);
+ /* skb might still be in there for recycle on short receives */
+ if (info->skb)
+ skb = info->skb;
+ else
+ skb = dev_alloc_skb(BUF_SIZE);
- if (!skb) {
- count = i - start;
+ if (unlikely(!skb))
break;
- }
dma = pci_map_single(mac->dma_pdev, skb->data, skb->len,
PCI_DMA_FROMDEVICE);
- if (dma_mapping_error(dma)) {
+ if (unlikely(dma_mapping_error(dma))) {
dev_kfree_skb_irq(info->skb);
- count = i - start;
break;
}
info->skb = skb;
info->dma = dma;
*buff = XCT_RXB_LEN(BUF_SIZE) | XCT_RXB_ADDR(dma);
+ i++;
}
wmb();
pci_write_config_dword(mac->dma_pdev,
PAS_DMA_RXCHAN_INCR(mac->dma_rxch),
- count);
+ limit - count);
pci_write_config_dword(mac->dma_pdev,
PAS_DMA_RXINT_INCR(mac->dma_if),
- count);
+ limit - count);
- mac->rx->next_to_fill += count;
+ mac->rx->next_to_fill += limit - count;
}
+static void pasemi_mac_restart_rx_intr(struct pasemi_mac *mac)
+{
+ unsigned int reg, stat;
+ /* Re-enable packet count interrupts: finally
+ * ack the packet count interrupt we got in rx_intr.
+ */
+
+ pci_read_config_dword(mac->iob_pdev,
+ PAS_IOB_DMA_RXCH_STAT(mac->dma_rxch),
+ &stat);
+
+ reg = PAS_IOB_DMA_RXCH_RESET_PCNT(stat & PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
+ | PAS_IOB_DMA_RXCH_RESET_PINTC;
+
+ pci_write_config_dword(mac->iob_pdev,
+ PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch),
+ reg);
+}
+
+static void pasemi_mac_restart_tx_intr(struct pasemi_mac *mac)
+{
+ unsigned int reg, stat;
+
+ /* Re-enable packet count interrupts */
+ pci_read_config_dword(mac->iob_pdev,
+ PAS_IOB_DMA_TXCH_STAT(mac->dma_txch), &stat);
+
+ reg = PAS_IOB_DMA_TXCH_RESET_PCNT(stat & PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
+ | PAS_IOB_DMA_TXCH_RESET_PINTC;
+
+ pci_write_config_dword(mac->iob_pdev,
+ PAS_IOB_DMA_TXCH_RESET(mac->dma_txch), reg);
+}
+
+
static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit)
{
- unsigned int i;
- int start, count;
+ unsigned int n;
+ int count;
+ struct pas_dma_xct_descr *dp;
+ struct pasemi_mac_buffer *info;
+ struct sk_buff *skb;
+ unsigned int i, len;
+ u64 macrx;
+ dma_addr_t dma;
spin_lock(&mac->rx->lock);
- start = mac->rx->next_to_clean;
- count = 0;
+ n = mac->rx->next_to_clean;
- for (i = start; i < (start + RX_RING_SIZE) && count < limit; i++) {
- struct pas_dma_xct_descr *dp;
- struct pasemi_mac_buffer *info;
- struct sk_buff *skb;
- unsigned int j, len;
- dma_addr_t dma;
+ for (count = limit; count; count--) {
rmb();
- dp = &RX_DESC(mac, i);
+ dp = &RX_DESC(mac, n);
+ macrx = dp->macrx;
- if (!(dp->macrx & XCT_MACRX_O))
+ if (!(macrx & XCT_MACRX_O))
break;
- count++;
info = NULL;
@@ -396,29 +453,42 @@
*/
dma = (dp->ptr & XCT_PTR_ADDR_M);
- for (j = start; j < (start + RX_RING_SIZE); j++) {
- info = &RX_DESC_INFO(mac, j);
+ for (i = n; i < (n + RX_RING_SIZE); i++) {
+ info = &RX_DESC_INFO(mac, i);
if (info->dma == dma)
break;
}
- BUG_ON(!info);
- BUG_ON(info->dma != dma);
+ skb = info->skb;
+ info->dma = 0;
- pci_unmap_single(mac->dma_pdev, info->dma, info->skb->len,
+ pci_unmap_single(mac->dma_pdev, dma, skb->len,
PCI_DMA_FROMDEVICE);
- skb = info->skb;
+ len = (macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S;
- len = (dp->macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S;
+ if (len < 256) {
+ struct sk_buff *new_skb =
+ netdev_alloc_skb(mac->netdev, len + NET_IP_ALIGN);
+ if (new_skb) {
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ memcpy(new_skb->data - NET_IP_ALIGN,
+ skb->data - NET_IP_ALIGN,
+ len + NET_IP_ALIGN);
+ /* save the skb in buffer_info as good */
+ skb = new_skb;
+ }
+ /* else just continue with the old one */
+ } else
+ info->skb = NULL;
skb_put(skb, len);
skb->protocol = eth_type_trans(skb, mac->netdev);
- if ((dp->macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK) {
+ if ((macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK) {
skb->ip_summed = CHECKSUM_COMPLETE;
- skb->csum = (dp->macrx & XCT_MACRX_CSUM_M) >>
+ skb->csum = (macrx & XCT_MACRX_CSUM_M) >>
XCT_MACRX_CSUM_S;
} else
skb->ip_summed = CHECKSUM_NONE;
@@ -428,13 +498,13 @@
netif_receive_skb(skb);
- info->dma = 0;
- info->skb = NULL;
dp->ptr = 0;
dp->macrx = 0;
+
+ n++;
}
- mac->rx->next_to_clean += count;
+ mac->rx->next_to_clean += limit - count;
pasemi_mac_replenish_rx_ring(mac->netdev);
spin_unlock(&mac->rx->lock);
@@ -476,6 +546,8 @@
mac->tx->next_to_clean += count;
spin_unlock_irqrestore(&mac->tx->lock, flags);
+ netif_wake_queue(mac->netdev);
+
return count;
}
@@ -486,18 +558,28 @@
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
- if (!(*mac->rx_status & PAS_STATUS_INT))
+ if (!(*mac->rx_status & PAS_STATUS_CAUSE_M))
return IRQ_NONE;
- netif_rx_schedule(dev);
- pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
- PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0));
+ if (*mac->rx_status & PAS_STATUS_ERROR)
+ printk("rx_status reported error\n");
- reg = PAS_IOB_DMA_RXCH_RESET_PINTC | PAS_IOB_DMA_RXCH_RESET_SINTC |
- PAS_IOB_DMA_RXCH_RESET_DINTC;
+ /* Don't reset packet count so it won't fire again but clear
+ * all others.
+ */
+
+ pci_read_config_dword(mac->dma_pdev, PAS_DMA_RXINT_RCMDSTA(mac->dma_if), ®);
+
+ reg = 0;
+ if (*mac->rx_status & PAS_STATUS_SOFT)
+ reg |= PAS_IOB_DMA_RXCH_RESET_SINTC;
+ if (*mac->rx_status & PAS_STATUS_ERROR)
+ reg |= PAS_IOB_DMA_RXCH_RESET_DINTC;
if (*mac->rx_status & PAS_STATUS_TIMER)
reg |= PAS_IOB_DMA_RXCH_RESET_TINTC;
+ netif_rx_schedule(dev);
+
pci_write_config_dword(mac->iob_pdev,
PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch), reg);
@@ -510,31 +592,137 @@
struct net_device *dev = data;
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
- int was_full;
- was_full = mac->tx->next_to_clean - mac->tx->next_to_use == TX_RING_SIZE;
-
- if (!(*mac->tx_status & PAS_STATUS_INT))
+ if (!(*mac->tx_status & PAS_STATUS_CAUSE_M))
return IRQ_NONE;
pasemi_mac_clean_tx(mac);
- reg = PAS_IOB_DMA_TXCH_RESET_PINTC | PAS_IOB_DMA_TXCH_RESET_SINTC;
- if (*mac->tx_status & PAS_STATUS_TIMER)
- reg |= PAS_IOB_DMA_TXCH_RESET_TINTC;
+ reg = PAS_IOB_DMA_TXCH_RESET_PINTC;
+
+ if (*mac->tx_status & PAS_STATUS_SOFT)
+ reg |= PAS_IOB_DMA_TXCH_RESET_SINTC;
+ if (*mac->tx_status & PAS_STATUS_ERROR)
+ reg |= PAS_IOB_DMA_TXCH_RESET_DINTC;
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
reg);
- if (was_full)
- netif_wake_queue(dev);
-
return IRQ_HANDLED;
}
+static void pasemi_adjust_link(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ int msg;
+ unsigned int flags;
+ unsigned int new_flags;
+
+ if (!mac->phydev->link) {
+ /* If no link, MAC speed settings don't matter. Just report
+ * link down and return.
+ */
+ if (mac->link && netif_msg_link(mac))
+ printk(KERN_INFO "%s: Link is down.\n", dev->name);
+
+ netif_carrier_off(dev);
+ mac->link = 0;
+
+ return;
+ } else
+ netif_carrier_on(dev);
+
+ pci_read_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, &flags);
+ new_flags = flags & ~(PAS_MAC_CFG_PCFG_HD | PAS_MAC_CFG_PCFG_SPD_M |
+ PAS_MAC_CFG_PCFG_TSR_M);
+
+ if (!mac->phydev->duplex)
+ new_flags |= PAS_MAC_CFG_PCFG_HD;
+
+ switch (mac->phydev->speed) {
+ case 1000:
+ new_flags |= PAS_MAC_CFG_PCFG_SPD_1G |
+ PAS_MAC_CFG_PCFG_TSR_1G;
+ break;
+ case 100:
+ new_flags |= PAS_MAC_CFG_PCFG_SPD_100M |
+ PAS_MAC_CFG_PCFG_TSR_100M;
+ break;
+ case 10:
+ new_flags |= PAS_MAC_CFG_PCFG_SPD_10M |
+ PAS_MAC_CFG_PCFG_TSR_10M;
+ break;
+ default:
+ printk("Unsupported speed %d\n", mac->phydev->speed);
+ }
+
+ /* Print on link or speed/duplex change */
+ msg = mac->link != mac->phydev->link || flags != new_flags;
+
+ mac->duplex = mac->phydev->duplex;
+ mac->speed = mac->phydev->speed;
+ mac->link = mac->phydev->link;
+
+ if (new_flags != flags)
+ pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, new_flags);
+
+ if (msg && netif_msg_link(mac))
+ printk(KERN_INFO "%s: Link is up at %d Mbps, %s duplex.\n",
+ dev->name, mac->speed, mac->duplex ? "full" : "half");
+}
+
+static int pasemi_mac_phy_init(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ struct device_node *dn, *phy_dn;
+ struct phy_device *phydev;
+ unsigned int phy_id;
+ const phandle *ph;
+ const unsigned int *prop;
+ struct resource r;
+ int ret;
+
+ dn = pci_device_to_OF_node(mac->pdev);
+ ph = of_get_property(dn, "phy-handle", NULL);
+ if (!ph)
+ return -ENODEV;
+ phy_dn = of_find_node_by_phandle(*ph);
+
+ prop = of_get_property(phy_dn, "reg", NULL);
+ ret = of_address_to_resource(phy_dn->parent, 0, &r);
+ if (ret)
+ goto err;
+
+ phy_id = *prop;
+ snprintf(mac->phy_id, BUS_ID_SIZE, PHY_ID_FMT, (int)r.start, phy_id);
+
+ of_node_put(phy_dn);
+
+ mac->link = 0;
+ mac->speed = 0;
+ mac->duplex = -1;
+
+ phydev = phy_connect(dev, mac->phy_id, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII);
+
+ if (IS_ERR(phydev)) {
+ printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);
+ return PTR_ERR(phydev);
+ }
+
+ mac->phydev = phydev;
+
+ return 0;
+
+err:
+ of_node_put(phy_dn);
+ return -ENODEV;
+}
+
+
static int pasemi_mac_open(struct net_device *dev)
{
struct pasemi_mac *mac = netdev_priv(dev);
+ int base_irq;
unsigned int flags;
int ret;
@@ -558,10 +746,18 @@
flags |= PAS_MAC_CFG_PCFG_TSR_1G | PAS_MAC_CFG_PCFG_SPD_1G;
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_RXCH_CFG(mac->dma_rxch),
- PAS_IOB_DMA_RXCH_CFG_CNTTH(30));
+ PAS_IOB_DMA_RXCH_CFG_CNTTH(1));
+ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_CFG(mac->dma_txch),
+ PAS_IOB_DMA_TXCH_CFG_CNTTH(32));
+
+ /* Clear out any residual packet count state from firmware */
+ pasemi_mac_restart_rx_intr(mac);
+ pasemi_mac_restart_tx_intr(mac);
+
+ /* 0xffffff is max value, about 16ms */
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
- PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(1000000));
+ PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0xffffff));
pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, flags);
@@ -595,31 +791,50 @@
pasemi_mac_replenish_rx_ring(dev);
+ ret = pasemi_mac_phy_init(dev);
+ /* Some configs don't have PHYs (XAUI etc), so don't complain about
+ * failed init due to -ENODEV.
+ */
+ if (ret && ret != -ENODEV)
+ dev_warn(&mac->pdev->dev, "phy init failed: %d\n", ret);
+
netif_start_queue(dev);
netif_poll_enable(dev);
- ret = request_irq(mac->dma_pdev->irq + mac->dma_txch,
- &pasemi_mac_tx_intr, IRQF_DISABLED,
+ /* Interrupts are a bit different for our DMA controller: While
+ * it's got one a regular PCI device header, the interrupt there
+ * is really the base of the range it's using. Each tx and rx
+ * channel has it's own interrupt source.
+ */
+
+ base_irq = virq_to_hw(mac->dma_pdev->irq);
+
+ mac->tx_irq = irq_create_mapping(NULL, base_irq + mac->dma_txch);
+ mac->rx_irq = irq_create_mapping(NULL, base_irq + 20 + mac->dma_txch);
+
+ ret = request_irq(mac->tx_irq, &pasemi_mac_tx_intr, IRQF_DISABLED,
mac->tx->irq_name, dev);
if (ret) {
dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
- mac->dma_pdev->irq + mac->dma_txch, ret);
+ base_irq + mac->dma_txch, ret);
goto out_tx_int;
}
- ret = request_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch,
- &pasemi_mac_rx_intr, IRQF_DISABLED,
+ ret = request_irq(mac->rx_irq, &pasemi_mac_rx_intr, IRQF_DISABLED,
mac->rx->irq_name, dev);
if (ret) {
dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
- mac->dma_pdev->irq + 20 + mac->dma_rxch, ret);
+ base_irq + 20 + mac->dma_rxch, ret);
goto out_rx_int;
}
+ if (mac->phydev)
+ phy_start(mac->phydev);
+
return 0;
out_rx_int:
- free_irq(mac->dma_pdev->irq + mac->dma_txch, dev);
+ free_irq(mac->tx_irq, dev);
out_tx_int:
netif_poll_disable(dev);
netif_stop_queue(dev);
@@ -639,6 +854,11 @@
unsigned int stat;
int retries;
+ if (mac->phydev) {
+ phy_stop(mac->phydev);
+ phy_disconnect(mac->phydev);
+ }
+
netif_stop_queue(dev);
/* Clean out any pending buffers */
@@ -660,40 +880,37 @@
pci_read_config_dword(mac->dma_pdev,
PAS_DMA_TXCHAN_TCMDSTA(mac->dma_txch),
&stat);
- if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)
+ if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT))
break;
cond_resched();
}
- if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) {
+ if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)
dev_err(&mac->dma_pdev->dev, "Failed to stop tx channel\n");
- }
for (retries = 0; retries < MAX_RETRIES; retries++) {
pci_read_config_dword(mac->dma_pdev,
PAS_DMA_RXCHAN_CCMDSTA(mac->dma_rxch),
&stat);
- if (stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)
+ if (!(stat & PAS_DMA_RXCHAN_CCMDSTA_ACT))
break;
cond_resched();
}
- if (!(stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)) {
+ if (stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)
dev_err(&mac->dma_pdev->dev, "Failed to stop rx channel\n");
- }
for (retries = 0; retries < MAX_RETRIES; retries++) {
pci_read_config_dword(mac->dma_pdev,
PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
&stat);
- if (stat & PAS_DMA_RXINT_RCMDSTA_ACT)
+ if (!(stat & PAS_DMA_RXINT_RCMDSTA_ACT))
break;
cond_resched();
}
- if (!(stat & PAS_DMA_RXINT_RCMDSTA_ACT)) {
+ if (stat & PAS_DMA_RXINT_RCMDSTA_ACT)
dev_err(&mac->dma_pdev->dev, "Failed to stop rx interface\n");
- }
/* Then, disable the channel. This must be done separately from
* stopping, since you can't disable when active.
@@ -706,8 +923,8 @@
pci_write_config_dword(mac->dma_pdev,
PAS_DMA_RXINT_RCMDSTA(mac->dma_if), 0);
- free_irq(mac->dma_pdev->irq + mac->dma_txch, dev);
- free_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch, dev);
+ free_irq(mac->tx_irq, dev);
+ free_irq(mac->rx_irq, dev);
/* Free resources */
pasemi_mac_free_rx_resources(dev);
@@ -802,6 +1019,7 @@
return &mac->stats;
}
+
static void pasemi_mac_set_rx_mode(struct net_device *dev)
{
struct pasemi_mac *mac = netdev_priv(dev);
@@ -826,18 +1044,17 @@
pkts = pasemi_mac_clean_rx(mac, limit);
+ dev->quota -= pkts;
+ *budget -= pkts;
+
if (pkts < limit) {
/* all done, no more packets present */
netif_rx_complete(dev);
- /* re-enable receive interrupts */
- pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
- PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(1000000));
+ pasemi_mac_restart_rx_intr(mac);
return 0;
} else {
/* used up our quantum, so reschedule */
- dev->quota -= pkts;
- *budget -= pkts;
return 1;
}
}
@@ -937,6 +1154,11 @@
mac->rx_status = &dma_status->rx_sta[mac->dma_rxch];
mac->tx_status = &dma_status->tx_sta[mac->dma_txch];
+ mac->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+ /* Enable most messages by default */
+ mac->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;
+
err = register_netdev(dev);
if (err) {
@@ -1011,9 +1233,5 @@
return pci_register_driver(&pasemi_mac_driver);
}
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
-MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
-
module_init(pasemi_mac_init_module);
module_exit(pasemi_mac_cleanup_module);
diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h
index c3e37e4..8bc0cea 100644
--- a/drivers/net/pasemi_mac.h
+++ b/drivers/net/pasemi_mac.h
@@ -24,6 +24,7 @@
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/spinlock.h>
+#include <linux/phy.h>
struct pasemi_mac_txring {
spinlock_t lock;
@@ -54,6 +55,7 @@
struct pci_dev *pdev;
struct pci_dev *dma_pdev;
struct pci_dev *iob_pdev;
+ struct phy_device *phydev;
struct net_device_stats stats;
/* Pointer to the cacheable per-channel status registers */
@@ -73,6 +75,14 @@
struct pasemi_mac_txring *tx;
struct pasemi_mac_rxring *rx;
+ unsigned long tx_irq;
+ unsigned long rx_irq;
+ int link;
+ int speed;
+ int duplex;
+
+ unsigned int msg_enable;
+ char phy_id[BUS_ID_SIZE];
};
/* Software status descriptor (desc_info) */
@@ -193,11 +203,15 @@
#define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE)
#define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001
#define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002
-#define PAS_DMA_RXINT_RCMDSTA_OO 0x00000100
-#define PAS_DMA_RXINT_RCMDSTA_BP 0x00000200
-#define PAS_DMA_RXINT_RCMDSTA_DR 0x00000400
+#define PAS_DMA_RXINT_RCMDSTA_MBT 0x00000008
+#define PAS_DMA_RXINT_RCMDSTA_MDR 0x00000010
+#define PAS_DMA_RXINT_RCMDSTA_MOO 0x00000020
+#define PAS_DMA_RXINT_RCMDSTA_MBP 0x00000040
#define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800
-#define PAS_DMA_RXINT_RCMDSTA_TB 0x00001000
+#define PAS_DMA_RXINT_RCMDSTA_DR 0x00001000
+#define PAS_DMA_RXINT_RCMDSTA_OO 0x00002000
+#define PAS_DMA_RXINT_RCMDSTA_BP 0x00004000
+#define PAS_DMA_RXINT_RCMDSTA_TB 0x00008000
#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000
#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000
#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17
@@ -297,6 +311,7 @@
#define PAS_STATUS_DCNT_S 16
#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull
#define PAS_STATUS_BPCNT_S 32
+#define PAS_STATUS_CAUSE_M 0xf000000000000000ull
#define PAS_STATUS_TIMER 0x1000000000000000ull
#define PAS_STATUS_ERROR 0x2000000000000000ull
#define PAS_STATUS_SOFT 0x4000000000000000ull
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 809ec440..258d6f3 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1420,7 +1420,7 @@
kio_addr_t ioaddr = dev->base_addr;
local_info_t *lp = netdev_priv(dev);
struct dev_mc_list *dmi = dev->mc_list;
- char *addr;
+ unsigned char *addr;
int i,j,k,n;
SelectPage(k=0x50);
@@ -1429,6 +1429,9 @@
if (++n > 9)
break;
i = 0;
+ if (n > 1 && n <= dev->mc_count && dmi) {
+ dmi = dmi->next;
+ }
}
if (j > 15) {
j = 8;
@@ -1436,10 +1439,9 @@
SelectPage(k);
}
- if (n && n <= dev->mc_count && dmi) {
+ if (n && n <= dev->mc_count && dmi)
addr = dmi->dmi_addr;
- dmi = dmi->next;
- } else
+ else
addr = dev->dev_addr;
if (lp->mohawk)
@@ -1465,10 +1467,10 @@
if (dev->flags & IFF_PROMISC) { /* snoop */
PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
} else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
- PutByte(XIRCREG42_SWC1, 0x06); /* set MPE */
+ PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */
} else if (dev->mc_count) {
/* the chip can filter 9 addresses perfectly */
- PutByte(XIRCREG42_SWC1, 0x00);
+ PutByte(XIRCREG42_SWC1, 0x01);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, Offline);
set_addresses(dev);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 21afe10..b07da10 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -135,10 +135,13 @@
/* Wake on Lan only supported on Yukon chips with rev 1 or above */
static u32 wol_supported(const struct skge_hw *hw)
{
- if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev != 0)
- return WAKE_MAGIC | WAKE_PHY;
- else
+ if (hw->chip_id == CHIP_ID_GENESIS)
return 0;
+
+ if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0)
+ return 0;
+
+ return WAKE_MAGIC | WAKE_PHY;
}
static u32 pci_wake_enabled(struct pci_dev *dev)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 238c2ca..a307310 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -124,10 +124,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
-#ifdef broken
- /* This device causes data corruption problems that are not resolved */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
-#endif
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
@@ -3581,10 +3578,21 @@
goto err_out;
}
+ /* Some Gigabyte motherboards have 88e8056 but cause problems
+ * There is some unresolved hardware related problem that causes
+ * descriptor errors and receive data corruption.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL &&
+ pdev->device == 0x4364 && pdev->subsystem_vendor == 0x1458) {
+ dev_err(&pdev->dev,
+ "88E8056 on Gigabyte motherboards not supported\n");
+ goto err_out_disable;
+ }
+
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
- goto err_out;
+ goto err_out_disable;
}
pci_set_master(pdev);
@@ -3721,6 +3729,7 @@
kfree(hw);
err_out_free_regions:
pci_release_regions(pdev);
+err_out_disable:
pci_disable_device(pdev);
err_out:
return err;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 7053026..111f23d 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -279,6 +279,40 @@
#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
+#elif defined(CONFIG_SUPERH)
+
+#if defined(CONFIG_SH_7780_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE)
+#define SMC_CAN_USE_8BIT 0
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 0
+#define SMC_IO_SHIFT 0
+#define SMC_NOWAIT 1
+
+#define SMC_inb(a, r) (inw((a) + ((r)&~1)) >> (8*(r%2)))&0xff
+#define SMC_inw(a, r) inw((a) + (r))
+#define SMC_outb(v, a, r) outw(((inw((a)+((r)&~1))*(0xff<<8*(r%2)))) | ((v)<<(8*(r&2)))), (a) + ((r)&~1))
+
+#define SMC_outw(v, a, r) outw(v, (a) + (r))
+#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
+
+#else /* BOARDS */
+
+#define SMC_CAN_USE_8BIT 1
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 1
+
+#define SMC_inb(a, r) inb((a) + (r))
+#define SMC_inw(a, r) inw((a) + (r))
+#define SMC_outb(v, a, r) outb(v, (a) + (r))
+#define SMC_outw(v, a, r) outw(v, (a) + (r))
+#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
+
+#endif /* BOARDS */
+
+#define set_irq_type(irq, type) do {} while (0)
+
#elif defined(CONFIG_M32R)
#define SMC_CAN_USE_8BIT 0
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index f1e2dfc..463d600 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -540,7 +540,6 @@
skb = dev_alloc_skb(RX_BUF_SIZE);
if (!skb)
return NULL;
- skb->dev = dev;
*dma_handle = pci_map_single(hwdev, skb->data, RX_BUF_SIZE,
PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(*dma_handle)) {
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 0184614..e273347 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -267,7 +267,7 @@
config LIBERTAS_USB
tristate "Marvell Libertas 8388 802.11a/b/g cards"
- depends on NET_RADIO && USB
+ depends on USB && WLAN_80211
select FW_LOADER
---help---
A driver for Marvell Libertas 8388 USB devices.
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index cba64e4..f770018 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -996,18 +996,25 @@
if (qdio_has_outbound_q_moved(q))
qdio_kick_outbound_handler(q);
- if (q->is_iqdio_q) {
+ if (q->queue_type == QDIO_ZFCP_QFMT) {
+ if ((!q->hydra_gives_outbound_pcis) &&
+ (!qdio_is_outbound_q_done(q)))
+ qdio_mark_q(q);
+ }
+ else if (((!q->is_iqdio_q) && (!q->is_pci_out)) ||
+ (q->queue_type == QDIO_IQDIO_QFMT_ASYNCH)) {
/*
- * for asynchronous queues, we better check, if the sent
- * buffer is already switched from PRIMED to EMPTY.
+ * make sure buffer switch from PRIMED to EMPTY is noticed
+ * and outbound_handler is called
*/
- if ((q->queue_type == QDIO_IQDIO_QFMT_ASYNCH) &&
- !qdio_is_outbound_q_done(q))
- qdio_mark_q(q);
-
- } else if (!q->hydra_gives_outbound_pcis)
- if (!qdio_is_outbound_q_done(q))
- qdio_mark_q(q);
+ if (qdio_is_outbound_q_done(q)) {
+ del_timer(&q->timer);
+ } else {
+ if (!timer_pending(&q->timer))
+ mod_timer(&q->timer, jiffies +
+ QDIO_FORCE_CHECK_TIMEOUT);
+ }
+ }
qdio_release_q(q);
}
@@ -1826,6 +1833,7 @@
q->queue_type = QDIO_IQDIO_QFMT_ASYNCH;
q->int_parm=int_parm;
q->is_input_q=0;
+ q->is_pci_out = 0;
q->schid = irq_ptr->schid;
q->cdev = cdev;
q->irq_ptr = irq_ptr;
@@ -1838,6 +1846,10 @@
q->tasklet.data=(unsigned long)q;
q->tasklet.func=(void(*)(unsigned long))
&qdio_outbound_processing;
+ q->timer.function=(void(*)(unsigned long))
+ &qdio_outbound_processing;
+ q->timer.data = (long)q;
+ init_timer(&q->timer);
atomic_set(&q->busy_siga_counter,0);
q->timing.busy_start=0;
@@ -2635,6 +2647,7 @@
for (i=0;i<irq_ptr->no_output_qs;i++) {
tasklet_kill(&irq_ptr->output_qs[i]->tasklet);
+ del_timer(&irq_ptr->output_qs[i]->timer);
wait_event_interruptible_timeout(cdev->private->wait_q,
!atomic_read(&irq_ptr->
output_qs[i]->
@@ -3458,6 +3471,10 @@
qdio_perf_stat_inc(&perf_stats.outbound_cnt);
return;
}
+ if (callflags & QDIO_FLAG_PCI_OUT)
+ q->is_pci_out = 1;
+ else
+ q->is_pci_out = 0;
if (q->is_iqdio_q) {
/* one siga for every sbal */
while (count--)
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index 2895392..6d7aad1 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -60,6 +60,7 @@
#define QDIO_ACTIVATE_TIMEOUT ((5*HZ)>>10)
#define QDIO_CLEANUP_CLEAR_TIMEOUT (20*HZ)
#define QDIO_CLEANUP_HALT_TIMEOUT (10*HZ)
+#define QDIO_FORCE_CHECK_TIMEOUT (10*HZ)
enum qdio_irq_states {
QDIO_IRQ_STATE_INACTIVE,
@@ -511,8 +512,8 @@
void *irq_ptr;
-#ifdef QDIO_USE_TIMERS_FOR_POLLING
struct timer_list timer;
+#ifdef QDIO_USE_TIMERS_FOR_POLLING
atomic_t timer_already_set;
spinlock_t timer_lock;
#else /* QDIO_USE_TIMERS_FOR_POLLING */
@@ -558,6 +559,7 @@
} timing;
atomic_t busy_siga_counter;
unsigned int queue_type;
+ unsigned int is_pci_out;
/* leave this member at the end. won't be cleared in qdio_fill_qs */
struct slib *slib; /* a page is allocated under this pointer,
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index e10e85e..c358764 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -1862,12 +1862,14 @@
write_lock_bh(&iucv_connection_rwlock);
list_del_init(&conn->list);
write_unlock_bh(&iucv_connection_rwlock);
+ fsm_deltimer(&conn->timer);
+ netiucv_purge_skb_queue(&conn->collect_queue);
if (conn->path) {
iucv_path_sever(conn->path, iucvMagic);
kfree(conn->path);
conn->path = NULL;
}
- fsm_deltimer(&conn->timer);
+ netiucv_purge_skb_queue(&conn->commit_queue);
kfree_fsm(conn->fsm);
kfree_skb(conn->rx_buff);
kfree_skb(conn->tx_buff);
@@ -2115,7 +2117,6 @@
while (!list_empty(&iucv_connection_list)) {
cp = list_entry(iucv_connection_list.next,
struct iucv_connection, list);
- list_del(&cp->list);
ndev = cp->netdev;
priv = netdev_priv(ndev);
dev = priv->dev;
diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c
index dd7034f..4640f32 100644
--- a/drivers/s390/net/qeth_eddp.c
+++ b/drivers/s390/net/qeth_eddp.c
@@ -620,10 +620,10 @@
struct qeth_eddp_context *
qeth_eddp_create_context(struct qeth_card *card, struct sk_buff *skb,
- struct qeth_hdr *qhdr)
+ struct qeth_hdr *qhdr, unsigned char sk_protocol)
{
QETH_DBF_TEXT(trace, 5, "creddpc");
- switch (skb->sk->sk_protocol){
+ switch (sk_protocol) {
case IPPROTO_TCP:
return qeth_eddp_create_context_tcp(card, skb, qhdr);
default:
diff --git a/drivers/s390/net/qeth_eddp.h b/drivers/s390/net/qeth_eddp.h
index 103768d..52910c9 100644
--- a/drivers/s390/net/qeth_eddp.h
+++ b/drivers/s390/net/qeth_eddp.h
@@ -34,7 +34,8 @@
};
extern struct qeth_eddp_context *
-qeth_eddp_create_context(struct qeth_card *,struct sk_buff *,struct qeth_hdr *);
+qeth_eddp_create_context(struct qeth_card *,struct sk_buff *,
+ struct qeth_hdr *, unsigned char);
extern void
qeth_eddp_put_context(struct qeth_eddp_context *);
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 6fd8870..29d1760 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -1682,6 +1682,21 @@
kfree(reply);
}
+static void
+qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, struct qeth_card *card)
+{
+ int rc;
+ int com;
+ char * ipa_name;
+
+ com = cmd->hdr.command;
+ rc = cmd->hdr.return_code;
+ ipa_name = qeth_get_ipa_cmd_name(com);
+
+ PRINT_ERR("%s(x%X) for %s returned x%X \"%s\"\n", ipa_name, com,
+ QETH_CARD_IFNAME(card), rc, qeth_get_ipa_msg(rc));
+}
+
static struct qeth_ipa_cmd *
qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob)
{
@@ -1690,8 +1705,11 @@
QETH_DBF_TEXT(trace,5,"chkipad");
if (IS_IPA(iob->data)){
cmd = (struct qeth_ipa_cmd *) PDU_ENCAPSULATION(iob->data);
- if (IS_IPA_REPLY(cmd))
+ if (IS_IPA_REPLY(cmd)) {
+ if (cmd->hdr.return_code)
+ qeth_issue_ipa_msg(cmd, card);
return cmd;
+ }
else {
switch (cmd->hdr.command) {
case IPA_CMD_STOPLAN:
@@ -2816,6 +2834,7 @@
struct qeth_qdio_out_buffer *buf;
int rc;
int i;
+ unsigned int qdio_flags;
QETH_DBF_TEXT(trace, 6, "flushbuf");
@@ -2859,13 +2878,13 @@
queue->card->perf_stats.outbound_do_qdio_start_time =
qeth_get_micros();
}
+ qdio_flags = QDIO_FLAG_SYNC_OUTPUT;
if (under_int)
- rc = do_QDIO(CARD_DDEV(queue->card),
- QDIO_FLAG_SYNC_OUTPUT | QDIO_FLAG_UNDER_INTERRUPT,
- queue->queue_no, index, count, NULL);
- else
- rc = do_QDIO(CARD_DDEV(queue->card), QDIO_FLAG_SYNC_OUTPUT,
- queue->queue_no, index, count, NULL);
+ qdio_flags |= QDIO_FLAG_UNDER_INTERRUPT;
+ if (atomic_read(&queue->set_pci_flags_count))
+ qdio_flags |= QDIO_FLAG_PCI_OUT;
+ rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags,
+ queue->queue_no, index, count, NULL);
if (queue->card->options.performance_stats)
queue->card->perf_stats.outbound_do_qdio_time +=
qeth_get_micros() -
@@ -4490,7 +4509,8 @@
qeth_fill_header(card, hdr, new_skb, ipv, cast_type);
}
if (large_send == QETH_LARGE_SEND_EDDP) {
- ctx = qeth_eddp_create_context(card, new_skb, hdr);
+ ctx = qeth_eddp_create_context(card, new_skb, hdr,
+ skb->sk->sk_protocol);
if (ctx == NULL) {
__qeth_free_new_skb(skb, new_skb);
PRINT_WARN("could not create eddp context\n");
@@ -5948,9 +5968,6 @@
cmd = (struct qeth_ipa_cmd *) data;
if (cmd->hdr.return_code) {
QETH_DBF_TEXT_(trace, 2, "L2er%x", cmd->hdr.return_code);
- PRINT_WARN("Error in registering MAC address on " \
- "device %s: x%x\n", CARD_BUS_ID(card),
- cmd->hdr.return_code);
card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED;
cmd->hdr.return_code = -EIO;
} else {
@@ -5985,9 +6002,6 @@
QETH_DBF_TEXT(trace, 2, "L2Dmaccb");
cmd = (struct qeth_ipa_cmd *) data;
if (cmd->hdr.return_code) {
- PRINT_WARN("Error in deregistering MAC address on " \
- "device %s: x%x\n", CARD_BUS_ID(card),
- cmd->hdr.return_code);
QETH_DBF_TEXT_(trace, 2, "err%d", cmd->hdr.return_code);
cmd->hdr.return_code = -EIO;
return 0;
@@ -6651,7 +6665,7 @@
QETH_DBF_TEXT(trace,4,"chgmaccb");
cmd = (struct qeth_ipa_cmd *) data;
- if (!card->options.layer2 || card->info.guestlan ||
+ if (!card->options.layer2 ||
!(card->info.mac_bits & QETH_LAYER2_MAC_READ)) {
memcpy(card->dev->dev_addr,
&cmd->data.setadapterparms.data.change_addr.addr,
@@ -8497,6 +8511,7 @@
card = (struct qeth_card *) dev->driver_data;
qeth_clear_ip_list(card, 0, 0);
qeth_qdio_clear_card(card, 0);
+ qeth_clear_qdio_buffers(card);
return 0;
}
diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c
index 77c8320..f54fdfd 100644
--- a/drivers/s390/net/qeth_mpc.c
+++ b/drivers/s390/net/qeth_mpc.c
@@ -157,12 +157,113 @@
};
+struct ipa_rc_msg {
+ enum qeth_ipa_return_codes rc;
+ char *msg;
+};
+
+struct ipa_rc_msg qeth_ipa_rc_msg[] = {
+ {IPA_RC_SUCCESS, "success"},
+ {IPA_RC_NOTSUPP, "Command not supported"},
+ {IPA_RC_IP_TABLE_FULL, "Add Addr IP Table Full - ipv6"},
+ {IPA_RC_UNKNOWN_ERROR, "IPA command failed - reason unknown"},
+ {IPA_RC_UNSUPPORTED_COMMAND, "Command not supported"},
+ {IPA_RC_DUP_IPV6_REMOTE,"ipv6 address already registered remote"},
+ {IPA_RC_DUP_IPV6_HOME, "ipv6 address already registered"},
+ {IPA_RC_UNREGISTERED_ADDR, "Address not registered"},
+ {IPA_RC_NO_ID_AVAILABLE, "No identifiers available"},
+ {IPA_RC_ID_NOT_FOUND, "Identifier not found"},
+ {IPA_RC_INVALID_IP_VERSION, "IP version incorrect"},
+ {IPA_RC_LAN_FRAME_MISMATCH, "LAN and frame mismatch"},
+ {IPA_RC_L2_UNSUPPORTED_CMD, "Unsupported layer 2 command"},
+ {IPA_RC_L2_DUP_MAC, "Duplicate MAC address"},
+ {IPA_RC_L2_ADDR_TABLE_FULL, "Layer2 address table full"},
+ {IPA_RC_L2_DUP_LAYER3_MAC, "Duplicate with layer 3 MAC"},
+ {IPA_RC_L2_GMAC_NOT_FOUND, "GMAC not found"},
+ {IPA_RC_L2_MAC_NOT_FOUND, "L2 mac address not found"},
+ {IPA_RC_L2_INVALID_VLAN_ID, "L2 invalid vlan id"},
+ {IPA_RC_L2_DUP_VLAN_ID, "L2 duplicate vlan id"},
+ {IPA_RC_L2_VLAN_ID_NOT_FOUND, "L2 vlan id not found"},
+ {IPA_RC_DATA_MISMATCH, "Data field mismatch (v4/v6 mixed)"},
+ {IPA_RC_INVALID_MTU_SIZE, "Invalid MTU size"},
+ {IPA_RC_INVALID_LANTYPE, "Invalid LAN type"},
+ {IPA_RC_INVALID_LANNUM, "Invalid LAN num"},
+ {IPA_RC_DUPLICATE_IP_ADDRESS, "Address already registered"},
+ {IPA_RC_IP_ADDR_TABLE_FULL, "IP address table full"},
+ {IPA_RC_LAN_PORT_STATE_ERROR, "LAN port state error"},
+ {IPA_RC_SETIP_NO_STARTLAN, "Setip no startlan received"},
+ {IPA_RC_SETIP_ALREADY_RECEIVED, "Setip already received"},
+ {IPA_RC_IP_ADDR_ALREADY_USED, "IP address already in use on LAN"},
+ {IPA_RC_MULTICAST_FULL, "No task available, multicast full"},
+ {IPA_RC_SETIP_INVALID_VERSION, "SETIP invalid IP version"},
+ {IPA_RC_UNSUPPORTED_SUBCMD, "Unsupported assist subcommand"},
+ {IPA_RC_ARP_ASSIST_NO_ENABLE, "Only partial success, no enable"},
+ {IPA_RC_PRIMARY_ALREADY_DEFINED,"Primary already defined"},
+ {IPA_RC_SECOND_ALREADY_DEFINED, "Secondary already defined"},
+ {IPA_RC_INVALID_SETRTG_INDICATOR,"Invalid SETRTG indicator"},
+ {IPA_RC_MC_ADDR_ALREADY_DEFINED,"Multicast address already defined"},
+ {IPA_RC_LAN_OFFLINE, "STRTLAN_LAN_DISABLED - LAN offline"},
+ {IPA_RC_INVALID_IP_VERSION2, "Invalid IP version"},
+ {IPA_RC_FFFF, "Unknown Error"}
+};
+char *
+qeth_get_ipa_msg(enum qeth_ipa_return_codes rc)
+{
+ int x = 0;
+ qeth_ipa_rc_msg[sizeof(qeth_ipa_rc_msg) /
+ sizeof(struct ipa_rc_msg) - 1].rc = rc;
+ while(qeth_ipa_rc_msg[x].rc != rc)
+ x++;
+ return qeth_ipa_rc_msg[x].msg;
+}
+struct ipa_cmd_names {
+ enum qeth_ipa_cmds cmd;
+ char *name;
+};
+struct ipa_cmd_names qeth_ipa_cmd_names[] = {
+ {IPA_CMD_STARTLAN, "startlan"},
+ {IPA_CMD_STOPLAN, "stoplan"},
+ {IPA_CMD_SETVMAC, "setvmac"},
+ {IPA_CMD_DELVMAC, "delvmca"},
+ {IPA_CMD_SETGMAC, "setgmac"},
+ {IPA_CMD_DELGMAC, "delgmac"},
+ {IPA_CMD_SETVLAN, "setvlan"},
+ {IPA_CMD_DELVLAN, "delvlan"},
+ {IPA_CMD_SETCCID, "setccid"},
+ {IPA_CMD_DELCCID, "delccid"},
+ {IPA_CMD_MODCCID, "setip"},
+ {IPA_CMD_SETIP, "setip"},
+ {IPA_CMD_QIPASSIST, "qipassist"},
+ {IPA_CMD_SETASSPARMS, "setassparms"},
+ {IPA_CMD_SETIPM, "setipm"},
+ {IPA_CMD_DELIPM, "delipm"},
+ {IPA_CMD_SETRTG, "setrtg"},
+ {IPA_CMD_DELIP, "delip"},
+ {IPA_CMD_SETADAPTERPARMS, "setadapterparms"},
+ {IPA_CMD_SET_DIAG_ASS, "set_diag_ass"},
+ {IPA_CMD_CREATE_ADDR, "create_addr"},
+ {IPA_CMD_DESTROY_ADDR, "destroy_addr"},
+ {IPA_CMD_REGISTER_LOCAL_ADDR, "register_local_addr"},
+ {IPA_CMD_UNREGISTER_LOCAL_ADDR, "unregister_local_addr"},
+ {IPA_CMD_UNKNOWN, "unknown"},
+};
+char *
+qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd)
+{
+ int x = 0;
+ qeth_ipa_cmd_names[
+ sizeof(qeth_ipa_cmd_names)/
+ sizeof(struct ipa_cmd_names)-1].cmd = cmd;
+ while(qeth_ipa_cmd_names[x].cmd != cmd)
+ x++;
+ return qeth_ipa_cmd_names[x].name;
+}
diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h
index d74bc43d..1d8083c 100644
--- a/drivers/s390/net/qeth_mpc.h
+++ b/drivers/s390/net/qeth_mpc.h
@@ -25,14 +25,14 @@
#define IPA_CMD_LENGTH (IPA_PDU_HEADER_SIZE + sizeof(struct qeth_ipa_cmd))
-#define QETH_SEQ_NO_LENGTH 4
-#define QETH_MPC_TOKEN_LENGTH 4
+#define QETH_SEQ_NO_LENGTH 4
+#define QETH_MPC_TOKEN_LENGTH 4
#define QETH_MCL_LENGTH 4
#define OSA_ADDR_LEN 6
-#define QETH_TIMEOUT (10 * HZ)
-#define QETH_IPA_TIMEOUT (45 * HZ)
-#define QETH_IDX_COMMAND_SEQNO 0xffff0000
+#define QETH_TIMEOUT (10 * HZ)
+#define QETH_IPA_TIMEOUT (45 * HZ)
+#define QETH_IDX_COMMAND_SEQNO 0xffff0000
#define SR_INFO_LEN 16
#define QETH_CLEAR_CHANNEL_PARM -10
@@ -93,79 +93,107 @@
*/
#define RESET_ROUTING_FLAG 0x10 /* indicate that routing type shall be set */
enum qeth_routing_types {
- NO_ROUTER = 0, /* TODO: set to bit flag used in IPA Command */
- PRIMARY_ROUTER = 1,
- SECONDARY_ROUTER = 2,
- MULTICAST_ROUTER = 3,
- PRIMARY_CONNECTOR = 4,
- SECONDARY_CONNECTOR = 5,
+ NO_ROUTER = 0, /* TODO: set to bit flag used in IPA Command */
+ PRIMARY_ROUTER = 1,
+ SECONDARY_ROUTER = 2,
+ MULTICAST_ROUTER = 3,
+ PRIMARY_CONNECTOR = 4,
+ SECONDARY_CONNECTOR = 5,
};
-
/* IPA Commands */
enum qeth_ipa_cmds {
- IPA_CMD_STARTLAN = 0x01,
- IPA_CMD_STOPLAN = 0x02,
- IPA_CMD_SETVMAC = 0x21,
- IPA_CMD_DELVMAC = 0x22,
- IPA_CMD_SETGMAC = 0x23,
- IPA_CMD_DELGMAC = 0x24,
- IPA_CMD_SETVLAN = 0x25,
- IPA_CMD_DELVLAN = 0x26,
- IPA_CMD_SETCCID = 0x41,
- IPA_CMD_DELCCID = 0x42,
- IPA_CMD_MODCCID = 0x43,
- IPA_CMD_SETIP = 0xb1,
- IPA_CMD_DELIP = 0xb7,
- IPA_CMD_QIPASSIST = 0xb2,
- IPA_CMD_SETASSPARMS = 0xb3,
- IPA_CMD_SETIPM = 0xb4,
- IPA_CMD_DELIPM = 0xb5,
- IPA_CMD_SETRTG = 0xb6,
- IPA_CMD_SETADAPTERPARMS = 0xb8,
- IPA_CMD_IPFRAME = 0xb9,
- IPA_CMD_ADD_ADDR_ENTRY = 0xc1,
- IPA_CMD_DELETE_ADDR_ENTRY = 0xc2,
- IPA_CMD_CREATE_ADDR = 0xc3,
- IPA_CMD_DESTROY_ADDR = 0xc4,
- IPA_CMD_REGISTER_LOCAL_ADDR = 0xd1,
- IPA_CMD_UNREGISTER_LOCAL_ADDR = 0xd2,
+ IPA_CMD_STARTLAN = 0x01,
+ IPA_CMD_STOPLAN = 0x02,
+ IPA_CMD_SETVMAC = 0x21,
+ IPA_CMD_DELVMAC = 0x22,
+ IPA_CMD_SETGMAC = 0x23,
+ IPA_CMD_DELGMAC = 0x24,
+ IPA_CMD_SETVLAN = 0x25,
+ IPA_CMD_DELVLAN = 0x26,
+ IPA_CMD_SETCCID = 0x41,
+ IPA_CMD_DELCCID = 0x42,
+ IPA_CMD_MODCCID = 0x43,
+ IPA_CMD_SETIP = 0xb1,
+ IPA_CMD_QIPASSIST = 0xb2,
+ IPA_CMD_SETASSPARMS = 0xb3,
+ IPA_CMD_SETIPM = 0xb4,
+ IPA_CMD_DELIPM = 0xb5,
+ IPA_CMD_SETRTG = 0xb6,
+ IPA_CMD_DELIP = 0xb7,
+ IPA_CMD_SETADAPTERPARMS = 0xb8,
+ IPA_CMD_SET_DIAG_ASS = 0xb9,
+ IPA_CMD_CREATE_ADDR = 0xc3,
+ IPA_CMD_DESTROY_ADDR = 0xc4,
+ IPA_CMD_REGISTER_LOCAL_ADDR = 0xd1,
+ IPA_CMD_UNREGISTER_LOCAL_ADDR = 0xd2,
+ IPA_CMD_UNKNOWN = 0x00
};
enum qeth_ip_ass_cmds {
IPA_CMD_ASS_START = 0x0001,
IPA_CMD_ASS_STOP = 0x0002,
- IPA_CMD_ASS_CONFIGURE = 0x0003,
- IPA_CMD_ASS_ENABLE = 0x0004,
+ IPA_CMD_ASS_CONFIGURE = 0x0003,
+ IPA_CMD_ASS_ENABLE = 0x0004,
};
enum qeth_arp_process_subcmds {
- IPA_CMD_ASS_ARP_SET_NO_ENTRIES = 0x0003,
- IPA_CMD_ASS_ARP_QUERY_CACHE = 0x0004,
- IPA_CMD_ASS_ARP_ADD_ENTRY = 0x0005,
- IPA_CMD_ASS_ARP_REMOVE_ENTRY = 0x0006,
- IPA_CMD_ASS_ARP_FLUSH_CACHE = 0x0007,
- IPA_CMD_ASS_ARP_QUERY_INFO = 0x0104,
- IPA_CMD_ASS_ARP_QUERY_STATS = 0x0204,
+ IPA_CMD_ASS_ARP_SET_NO_ENTRIES = 0x0003,
+ IPA_CMD_ASS_ARP_QUERY_CACHE = 0x0004,
+ IPA_CMD_ASS_ARP_ADD_ENTRY = 0x0005,
+ IPA_CMD_ASS_ARP_REMOVE_ENTRY = 0x0006,
+ IPA_CMD_ASS_ARP_FLUSH_CACHE = 0x0007,
+ IPA_CMD_ASS_ARP_QUERY_INFO = 0x0104,
+ IPA_CMD_ASS_ARP_QUERY_STATS = 0x0204,
};
-/* Return Codes for IPA Commands */
+
+/* Return Codes for IPA Commands
+ * according to OSA card Specs */
+
enum qeth_ipa_return_codes {
- IPA_RC_SUCCESS = 0x0000,
- IPA_RC_NOTSUPP = 0x0001,
- IPA_RC_NO_ACCESS = 0x0002,
- IPA_RC_FAILED = 0x0003,
- IPA_RC_DATA_MISMATCH = 0xe001,
- IPA_RC_INVALID_LAN_TYPE = 0xe003,
- IPA_RC_INVALID_LAN_NO = 0xe004,
- IPA_RC_IPADDR_ALREADY_REG = 0xe005,
- IPA_RC_IPADDR_TABLE_FULL = 0xe006,
- IPA_RC_IPADDR_ALREADY_USED = 0xe00a,
- IPA_RC_ASSNO_NOT_SUPP = 0xe00d,
- IPA_RC_ASSCMD_START_FAILED = 0xe00e,
- IPA_RC_ASSCMD_PART_SUCCESS = 0xe00f,
- IPA_RC_IPADDR_NOT_DEFINED = 0xe010,
- IPA_RC_LAN_OFFLINE = 0xe080,
+ IPA_RC_SUCCESS = 0x0000,
+ IPA_RC_NOTSUPP = 0x0001,
+ IPA_RC_IP_TABLE_FULL = 0x0002,
+ IPA_RC_UNKNOWN_ERROR = 0x0003,
+ IPA_RC_UNSUPPORTED_COMMAND = 0x0004,
+ IPA_RC_DUP_IPV6_REMOTE = 0x0008,
+ IPA_RC_DUP_IPV6_HOME = 0x0010,
+ IPA_RC_UNREGISTERED_ADDR = 0x0011,
+ IPA_RC_NO_ID_AVAILABLE = 0x0012,
+ IPA_RC_ID_NOT_FOUND = 0x0013,
+ IPA_RC_INVALID_IP_VERSION = 0x0020,
+ IPA_RC_LAN_FRAME_MISMATCH = 0x0040,
+ IPA_RC_L2_UNSUPPORTED_CMD = 0x2003,
+ IPA_RC_L2_DUP_MAC = 0x2005,
+ IPA_RC_L2_ADDR_TABLE_FULL = 0x2006,
+ IPA_RC_L2_DUP_LAYER3_MAC = 0x200a,
+ IPA_RC_L2_GMAC_NOT_FOUND = 0x200b,
+ IPA_RC_L2_MAC_NOT_FOUND = 0x2010,
+ IPA_RC_L2_INVALID_VLAN_ID = 0x2015,
+ IPA_RC_L2_DUP_VLAN_ID = 0x2016,
+ IPA_RC_L2_VLAN_ID_NOT_FOUND = 0x2017,
+ IPA_RC_DATA_MISMATCH = 0xe001,
+ IPA_RC_INVALID_MTU_SIZE = 0xe002,
+ IPA_RC_INVALID_LANTYPE = 0xe003,
+ IPA_RC_INVALID_LANNUM = 0xe004,
+ IPA_RC_DUPLICATE_IP_ADDRESS = 0xe005,
+ IPA_RC_IP_ADDR_TABLE_FULL = 0xe006,
+ IPA_RC_LAN_PORT_STATE_ERROR = 0xe007,
+ IPA_RC_SETIP_NO_STARTLAN = 0xe008,
+ IPA_RC_SETIP_ALREADY_RECEIVED = 0xe009,
+ IPA_RC_IP_ADDR_ALREADY_USED = 0xe00a,
+ IPA_RC_MULTICAST_FULL = 0xe00b,
+ IPA_RC_SETIP_INVALID_VERSION = 0xe00d,
+ IPA_RC_UNSUPPORTED_SUBCMD = 0xe00e,
+ IPA_RC_ARP_ASSIST_NO_ENABLE = 0xe00f,
+ IPA_RC_PRIMARY_ALREADY_DEFINED = 0xe010,
+ IPA_RC_SECOND_ALREADY_DEFINED = 0xe011,
+ IPA_RC_INVALID_SETRTG_INDICATOR = 0xe012,
+ IPA_RC_MC_ADDR_ALREADY_DEFINED = 0xe013,
+ IPA_RC_LAN_OFFLINE = 0xe080,
+ IPA_RC_INVALID_IP_VERSION2 = 0xf001,
+ IPA_RC_FFFF = 0xffff
};
/* IPA function flags; each flag marks availability of respective function */
@@ -183,7 +211,9 @@
IPA_SETADAPTERPARMS = 0x00000400L,
IPA_VLAN_PRIO = 0x00000800L,
IPA_PASSTHRU = 0x00001000L,
+ IPA_FLUSH_ARP_SUPPORT = 0x00002000L,
IPA_FULL_VLAN = 0x00004000L,
+ IPA_INBOUND_PASSTHRU = 0x00008000L,
IPA_SOURCE_MAC = 0x00010000L,
IPA_OSA_MC_ROUTER = 0x00020000L,
IPA_QUERY_ARP_ASSIST = 0x00040000L,
@@ -204,31 +234,30 @@
/* SETADAPTER IPA Command: ****************************************************/
enum qeth_ipa_setadp_cmd {
IPA_SETADP_QUERY_COMMANDS_SUPPORTED = 0x01,
- IPA_SETADP_ALTER_MAC_ADDRESS = 0x02,
- IPA_SETADP_ADD_DELETE_GROUP_ADDRESS = 0x04,
- IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR = 0x08,
- IPA_SETADP_SET_ADDRESSING_MODE = 0x10,
- IPA_SETADP_SET_CONFIG_PARMS = 0x20,
- IPA_SETADP_SET_CONFIG_PARMS_EXTENDED = 0x40,
- IPA_SETADP_SET_BROADCAST_MODE = 0x80,
- IPA_SETADP_SEND_OSA_MESSAGE = 0x0100,
- IPA_SETADP_SET_SNMP_CONTROL = 0x0200,
- IPA_SETADP_READ_SNMP_PARMS = 0x0400,
+ IPA_SETADP_ALTER_MAC_ADDRESS = 0x02,
+ IPA_SETADP_ADD_DELETE_GROUP_ADDRESS = 0x04,
+ IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR = 0x08,
+ IPA_SETADP_SET_ADDRESSING_MODE = 0x10,
+ IPA_SETADP_SET_CONFIG_PARMS = 0x20,
+ IPA_SETADP_SET_CONFIG_PARMS_EXTENDED = 0x40,
+ IPA_SETADP_SET_BROADCAST_MODE = 0x80,
+ IPA_SETADP_SEND_OSA_MESSAGE = 0x0100,
+ IPA_SETADP_SET_SNMP_CONTROL = 0x0200,
+ IPA_SETADP_QUERY_CARD_INFO = 0x0400,
IPA_SETADP_SET_PROMISC_MODE = 0x0800,
- IPA_SETADP_QUERY_CARD_INFO = 0x1000,
};
enum qeth_ipa_mac_ops {
- CHANGE_ADDR_READ_MAC = 0,
- CHANGE_ADDR_REPLACE_MAC = 1,
- CHANGE_ADDR_ADD_MAC = 2,
- CHANGE_ADDR_DEL_MAC = 4,
- CHANGE_ADDR_RESET_MAC = 8,
+ CHANGE_ADDR_READ_MAC = 0,
+ CHANGE_ADDR_REPLACE_MAC = 1,
+ CHANGE_ADDR_ADD_MAC = 2,
+ CHANGE_ADDR_DEL_MAC = 4,
+ CHANGE_ADDR_RESET_MAC = 8,
};
enum qeth_ipa_addr_ops {
- CHANGE_ADDR_READ_ADDR = 0,
- CHANGE_ADDR_ADD_ADDR = 1,
- CHANGE_ADDR_DEL_ADDR = 2,
- CHANGE_ADDR_FLUSH_ADDR_TABLE = 4,
+ CHANGE_ADDR_READ_ADDR = 0,
+ CHANGE_ADDR_ADD_ADDR = 1,
+ CHANGE_ADDR_DEL_ADDR = 2,
+ CHANGE_ADDR_FLUSH_ADDR_TABLE = 4,
};
enum qeth_ipa_promisc_modes {
SET_PROMISC_MODE_OFF = 0,
@@ -407,15 +436,15 @@
struct qeth_ipa_cmd {
struct qeth_ipacmd_hdr hdr;
union {
- struct qeth_ipacmd_setdelip4 setdelip4;
- struct qeth_ipacmd_setdelip6 setdelip6;
+ struct qeth_ipacmd_setdelip4 setdelip4;
+ struct qeth_ipacmd_setdelip6 setdelip6;
struct qeth_ipacmd_setdelipm setdelipm;
- struct qeth_ipacmd_setassparms setassparms;
- struct qeth_ipacmd_layer2setdelmac setdelmac;
- struct qeth_ipacmd_layer2setdelvlan setdelvlan;
- struct qeth_create_destroy_address create_destroy_addr;
- struct qeth_ipacmd_setadpparms setadapterparms;
- struct qeth_set_routing setrtg;
+ struct qeth_ipacmd_setassparms setassparms;
+ struct qeth_ipacmd_layer2setdelmac setdelmac;
+ struct qeth_ipacmd_layer2setdelvlan setdelvlan;
+ struct qeth_create_destroy_address create_destroy_addr;
+ struct qeth_ipacmd_setadpparms setadapterparms;
+ struct qeth_set_routing setrtg;
} data;
} __attribute__ ((packed));
@@ -433,6 +462,12 @@
QETH_IPA_ARP_RC_Q_NO_DATA = 0x0008,
};
+
+extern char *
+qeth_get_ipa_msg(enum qeth_ipa_return_codes rc);
+extern char *
+qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd);
+
#define QETH_SETASS_BASE_LEN (sizeof(struct qeth_ipacmd_hdr) + \
sizeof(struct qeth_ipacmd_setassparms_hdr))
#define QETH_IPA_ARP_DATA_POS(buffer) (buffer + IPA_PDU_HEADER_SIZE + \
@@ -521,7 +556,7 @@
extern unsigned char IDX_ACTIVATE_READ[];
extern unsigned char IDX_ACTIVATE_WRITE[];
-#define IDX_ACTIVATE_SIZE 0x22
+#define IDX_ACTIVATE_SIZE 0x22
#define QETH_IDX_ACT_ISSUER_RM_TOKEN(buffer) (buffer+0x0c)
#define QETH_IDX_NO_PORTNAME_REQUIRED(buffer) ((buffer)[0x0b]&0x80)
#define QETH_IDX_ACT_FUNC_LEVEL(buffer) (buffer+0x10)
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index d518419..65ffc21 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -384,8 +384,6 @@
route->type = PRIMARY_CONNECTOR;
} else if (!strcmp(tmp, "secondary_connector")) {
route->type = SECONDARY_CONNECTOR;
- } else if (!strcmp(tmp, "multicast_router")) {
- route->type = MULTICAST_ROUTER;
} else if (!strcmp(tmp, "primary_router")) {
route->type = PRIMARY_ROUTER;
} else if (!strcmp(tmp, "secondary_router")) {
diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h
index 127f72e..74db1dc 100644
--- a/include/asm-s390/qdio.h
+++ b/include/asm-s390/qdio.h
@@ -120,6 +120,7 @@
#define QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT 0x08 /* no effect on
adapter interrupts */
#define QDIO_FLAG_DONT_SIGA 0x10
+#define QDIO_FLAG_PCI_OUT 0x20
extern int do_QDIO(struct ccw_device*, unsigned int flags,
unsigned int queue_number,