Merge branch 'sh/alphaproject' into sh-latest
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index ac2a261..6ef8cf3 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -457,6 +457,9 @@
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
+2.1.30:
+ - Fix writev() (it kept writing the first segment over and over again
+ instead of moving onto subsequent segments).
2.1.29:
- Fix a deadlock when mounting read-write.
2.1.28:
diff --git a/MAINTAINERS b/MAINTAINERS
index 42f991e..64d7621 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4383,11 +4383,11 @@
F: drivers/scsi/nsp32*
NTFS FILESYSTEM
-M: Anton Altaparmakov <aia21@cantab.net>
+M: Anton Altaparmakov <anton@tuxera.com>
L: linux-ntfs-dev@lists.sourceforge.net
-W: http://www.linux-ntfs.org/
+W: http://www.tuxera.com/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
-S: Maintained
+S: Supported
F: Documentation/filesystems/ntfs.txt
F: fs/ntfs/
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 2018c7e..d893411 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -3,6 +3,9 @@
config SOLUTION_ENGINE
bool
+config SH_ALPHA_BOARD
+ bool
+
config SH_SOLUTION_ENGINE
bool "SolutionEngine"
select SOLUTION_ENGINE
@@ -320,6 +323,21 @@
Compact Flash socket, two serial ports and PC-104 bus.
More information at <http://sh2000.sh-linux.org>.
+config SH_APSH4A3A
+ bool "AP-SH4A-3A"
+ select SH_ALPHA_BOARD
+ depends on CPU_SUBTYPE_SH7785
+ help
+ Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
+
+config SH_APSH4AD0A
+ bool "AP-SH4AD-0A"
+ select SH_ALPHA_BOARD
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7786
+ help
+ Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
+
endmenu
source "arch/sh/boards/mach-r2d/Kconfig"
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index be7d11d..975a0f6 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -13,3 +13,5 @@
obj-$(CONFIG_SH_POLARIS) += board-polaris.o
obj-$(CONFIG_SH_TITAN) += board-titan.o
obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o
+obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o
+obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o
diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c
new file mode 100644
index 0000000..8e2a270
--- /dev/null
+++ b/arch/sh/boards/board-apsh4a3a.c
@@ -0,0 +1,175 @@
+/*
+ * ALPHAPROJECT AP-SH4A-3A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/physmap.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/clock.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 4 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 4,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = 0x01000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .name = "smsc911x-memory",
+ .start = 0xA4000000,
+ .end = 0xA4000000 + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "smsc911x-irq",
+ .start = evt2irq(0x200),
+ .end = evt2irq(0x200),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_16BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+static struct platform_device *apsh4a3a_devices[] __initdata = {
+ &nor_flash_device,
+ &smsc911x_device,
+};
+
+static int __init apsh4a3a_devices_setup(void)
+{
+ return platform_add_devices(apsh4a3a_devices,
+ ARRAY_SIZE(apsh4a3a_devices));
+}
+device_initcall(apsh4a3a_devices_setup);
+
+static int apsh4a3a_clk_init(void)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_get(NULL, "extal");
+ if (!clk || IS_ERR(clk))
+ return PTR_ERR(clk);
+ ret = clk_set_rate(clk, 33333000);
+ clk_put(clk);
+
+ return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4a3a_setup(char **cmdline_p)
+{
+ printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
+}
+
+static void __init apsh4a3a_init_irq(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+}
+
+/* Return the board specific boot mode pin configuration */
+static int apsh4a3a_mode_pins(void)
+{
+ int value = 0;
+
+ /* These are the factory default settings of SW1 and SW2.
+ * If you change these dip switches then you will need to
+ * adjust the values below as well.
+ */
+ value &= ~MODE_PIN0; /* Clock Mode 16 */
+ value &= ~MODE_PIN1;
+ value &= ~MODE_PIN2;
+ value &= ~MODE_PIN3;
+ value |= MODE_PIN4;
+ value &= ~MODE_PIN5; /* 16-bit Area0 bus width */
+ value |= MODE_PIN6; /* Area 0 SRAM interface */
+ value |= MODE_PIN7;
+ value |= MODE_PIN8; /* Little Endian */
+ value |= MODE_PIN9; /* Master Mode */
+ value |= MODE_PIN10; /* Crystal resonator */
+ value |= MODE_PIN11; /* Display Unit */
+ value |= MODE_PIN12;
+ value &= ~MODE_PIN13; /* 29-bit address mode */
+ value |= MODE_PIN14; /* No PLL step-up */
+
+ return value;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4a3a __initmv = {
+ .mv_name = "AP-SH4A-3A",
+ .mv_setup = apsh4a3a_setup,
+ .mv_clk_init = apsh4a3a_clk_init,
+ .mv_init_irq = apsh4a3a_init_irq,
+ .mv_mode_pins = apsh4a3a_mode_pins,
+};
diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c
new file mode 100644
index 0000000..e2bd218
--- /dev/null
+++ b/arch/sh/boards/board-apsh4ad0a.c
@@ -0,0 +1,125 @@
+/*
+ * ALPHAPROJECT AP-SH4AD-0A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2010 Matt Fleming
+ * Copyright (C) 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .name = "smsc911x-memory",
+ .start = 0xA4000000,
+ .end = 0xA4000000 + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "smsc911x-irq",
+ .start = evt2irq(0x200),
+ .end = evt2irq(0x200),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_16BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+static struct platform_device *apsh4ad0a_devices[] __initdata = {
+ &smsc911x_device,
+};
+
+static int __init apsh4ad0a_devices_setup(void)
+{
+ return platform_add_devices(apsh4ad0a_devices,
+ ARRAY_SIZE(apsh4ad0a_devices));
+}
+device_initcall(apsh4ad0a_devices_setup);
+
+static int apsh4ad0a_mode_pins(void)
+{
+ int value = 0;
+
+ /* These are the factory default settings of SW1 and SW2.
+ * If you change these dip switches then you will need to
+ * adjust the values below as well.
+ */
+ value |= MODE_PIN0; /* Clock Mode 3 */
+ value |= MODE_PIN1;
+ value &= ~MODE_PIN2;
+ value &= ~MODE_PIN3;
+ value &= ~MODE_PIN4; /* 16-bit Area0 bus width */
+ value |= MODE_PIN5;
+ value |= MODE_PIN6;
+ value |= MODE_PIN7; /* Normal mode */
+ value |= MODE_PIN8; /* Little Endian */
+ value |= MODE_PIN9; /* Crystal resonator */
+ value &= ~MODE_PIN10; /* 29-bit address mode */
+ value &= ~MODE_PIN11; /* PCI-E Root port */
+ value &= ~MODE_PIN12; /* 4 lane + 1 lane */
+ value |= MODE_PIN13; /* AUD Enable */
+ value &= ~MODE_PIN14; /* Normal Operation */
+
+ return value;
+}
+
+static int apsh4ad0a_clk_init(void)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_get(NULL, "extal");
+ if (!clk || IS_ERR(clk))
+ return PTR_ERR(clk);
+ ret = clk_set_rate(clk, 33333000);
+ clk_put(clk);
+
+ return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4ad0a_setup(char **cmdline_p)
+{
+ pr_info("Alpha Project AP-SH4AD-0A support:\n");
+}
+
+static void __init apsh4ad0a_init_irq(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4ad0a __initmv = {
+ .mv_name = "AP-SH4AD-0A",
+ .mv_setup = apsh4ad0a_setup,
+ .mv_mode_pins = apsh4ad0a_mode_pins,
+ .mv_clk_init = apsh4ad0a_clk_init,
+ .mv_init_irq = apsh4ad0a_init_irq,
+};
diff --git a/arch/sh/configs/apsh4a3a_defconfig b/arch/sh/configs/apsh4a3a_defconfig
new file mode 100644
index 0000000..6cb3279
--- /dev/null
+++ b/arch/sh/configs/apsh4a3a_defconfig
@@ -0,0 +1,102 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_APSH4A3A=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_KEXEC=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH7785FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig
new file mode 100644
index 0000000..e71a531
--- /dev/null
+++ b/arch/sh/configs/apsh4ad0a_defconfig
@@ -0,0 +1,133 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_RCU_TRACE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_CPU_SUBTYPE_SH7786=y
+CONFIG_MEMORY_SIZE=0x10000000
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_SH_APSH4AD0A=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_SH_CPU_FREQ=y
+CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_PM_RUNTIME=y
+CONFIG_CPU_IDLE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FB_SH7785FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DWARF_UNWINDER=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 0e68465..6dd56c4 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -9,6 +9,7 @@
HIGHLANDER SH_HIGHLANDER
RTS7751R2D SH_RTS7751R2D
RSK SH_RSK
+ALPHA_BOARD SH_ALPHA_BOARD
#
# List of companion chips / MFDs.
@@ -61,3 +62,5 @@
POLARIS SH_POLARIS
KFR2R09 SH_KFR2R09
ECOVEC SH_ECOVEC
+APSH4A3A SH_APSH4A3A
+APSH4AD0A SH_APSH4AD0A
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 4b9359a..83c32cb 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -464,6 +464,7 @@
tristate "Xen virtual block device support"
depends on XEN
default y
+ select XEN_XENBUS_FRONTEND
help
This driver implements the front-end of the Xen virtual
block device driver. It communicates with a back-end driver
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index 010e3de..c195bfe 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -94,6 +94,8 @@
#define G4x_GMCH_SIZE_VT_1_5M (0xa << 8)
#define G4x_GMCH_SIZE_VT_2M (0xc << 8)
+#define GFX_FLSH_CNTL 0x2170 /* 915+ */
+
#define I810_DRAM_CTL 0x3000
#define I810_DRAM_ROW_0 0x00000001
#define I810_DRAM_ROW_0_SDRAM 0x00000001
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 356f73e..e921b69 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -688,14 +688,14 @@
intel_private.base.stolen_size = intel_gtt_stolen_size();
+ intel_private.base.needs_dmar = USE_PCI_DMA_API && INTEL_GTT_GEN > 2;
+
ret = intel_gtt_setup_scratch_page();
if (ret != 0) {
intel_gtt_cleanup();
return ret;
}
- intel_private.base.needs_dmar = USE_PCI_DMA_API && INTEL_GTT_GEN > 2;
-
return 0;
}
@@ -814,6 +814,12 @@
}
}
+ /* On the resume path we may be adjusting the PGTBL value, so
+ * be paranoid and flush all chipset write buffers...
+ */
+ if (INTEL_GTT_GEN >= 3)
+ writel(0, intel_private.registers+GFX_FLSH_CNTL);
+
reg = intel_private.registers+I810_PGETBL_CTL;
writel(intel_private.PGETBL_save, reg);
if (HAS_PGTBL_EN && (readl(reg) & I810_PGETBL_ENABLED) == 0) {
@@ -823,6 +829,9 @@
return false;
}
+ if (INTEL_GTT_GEN >= 3)
+ writel(0, intel_private.registers+GFX_FLSH_CNTL);
+
return true;
}
@@ -991,14 +1000,14 @@
if (mem->page_count == 0)
return 0;
+ intel_gtt_clear_range(pg_start, mem->page_count);
+
if (intel_private.base.needs_dmar) {
intel_gtt_unmap_memory(mem->sg_list, mem->num_sg);
mem->sg_list = NULL;
mem->num_sg = 0;
}
- intel_gtt_clear_range(pg_start, mem->page_count);
-
return 0;
}
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 92f7578..19a3d58 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -106,10 +106,19 @@
}
}
+static const char *agp_type_str(int type)
+{
+ switch (type) {
+ case 0: return " uncached";
+ case 1: return " snooped";
+ default: return "";
+ }
+}
+
static void
describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj)
{
- seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s",
+ seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s",
&obj->base,
get_pin_flag(obj),
get_tiling_flag(obj),
@@ -118,6 +127,7 @@
obj->base.write_domain,
obj->last_rendering_seqno,
obj->last_fenced_seqno,
+ agp_type_str(obj->agp_type == AGP_USER_CACHED_MEMORY),
obj->dirty ? " dirty" : "",
obj->madv == I915_MADV_DONTNEED ? " purgeable" : "");
if (obj->base.name)
@@ -276,6 +286,37 @@
return 0;
}
+static int i915_gem_gtt_info(struct seq_file *m, void* data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj;
+ size_t total_obj_size, total_gtt_size;
+ int count, ret;
+
+ ret = mutex_lock_interruptible(&dev->struct_mutex);
+ if (ret)
+ return ret;
+
+ total_obj_size = total_gtt_size = count = 0;
+ list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
+ seq_printf(m, " ");
+ describe_obj(m, obj);
+ seq_printf(m, "\n");
+ total_obj_size += obj->base.size;
+ total_gtt_size += obj->gtt_space->size;
+ count++;
+ }
+
+ mutex_unlock(&dev->struct_mutex);
+
+ seq_printf(m, "Total %d objects, %zu bytes, %zu GTT size\n",
+ count, total_obj_size, total_gtt_size);
+
+ return 0;
+}
+
static int i915_gem_pageflip_info(struct seq_file *m, void *data)
{
@@ -456,8 +497,14 @@
}
seq_printf(m, "Interrupts received: %d\n",
atomic_read(&dev_priv->irq_received));
- for (i = 0; i < I915_NUM_RINGS; i++)
+ for (i = 0; i < I915_NUM_RINGS; i++) {
+ if (IS_GEN6(dev)) {
+ seq_printf(m, "Graphics Interrupt mask (%s): %08x\n",
+ dev_priv->ring[i].name,
+ I915_READ_IMR(&dev_priv->ring[i]));
+ }
i915_ring_seqno_info(m, &dev_priv->ring[i]);
+ }
mutex_unlock(&dev->struct_mutex);
return 0;
@@ -656,7 +703,7 @@
seq_printf(m, "%s [%d]:\n", name, count);
while (count--) {
- seq_printf(m, " %08x %8zd %04x %04x %08x%s%s%s%s%s",
+ seq_printf(m, " %08x %8zd %04x %04x %08x%s%s%s%s%s%s",
err->gtt_offset,
err->size,
err->read_domains,
@@ -666,7 +713,8 @@
tiling_flag(err->tiling),
dirty_flag(err->dirty),
purgeable_flag(err->purgeable),
- ring_str(err->ring));
+ ring_str(err->ring),
+ agp_type_str(err->agp_type));
if (err->name)
seq_printf(m, " (name: %d)", err->name);
@@ -744,7 +792,9 @@
if (error->batchbuffer[i]) {
struct drm_i915_error_object *obj = error->batchbuffer[i];
- seq_printf(m, "--- gtt_offset = 0x%08x\n", obj->gtt_offset);
+ seq_printf(m, "%s --- gtt_offset = 0x%08x\n",
+ dev_priv->ring[i].name,
+ obj->gtt_offset);
offset = 0;
for (page = 0; page < obj->page_count; page++) {
for (elt = 0; elt < PAGE_SIZE/4; elt++) {
@@ -890,7 +940,7 @@
struct drm_device *dev = node->minor->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u32 rgvmodectl = I915_READ(MEMMODECTL);
- u32 rstdbyctl = I915_READ(MCHBAR_RENDER_STANDBY);
+ u32 rstdbyctl = I915_READ(RSTDBYCTL);
u16 crstandvid = I915_READ16(CRSTANDVID);
seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
@@ -913,6 +963,30 @@
seq_printf(m, "RS2 VID: %d\n", ((crstandvid >> 8) & 0x3f));
seq_printf(m, "Render standby enabled: %s\n",
(rstdbyctl & RCX_SW_EXIT) ? "no" : "yes");
+ seq_printf(m, "Current RS state: ");
+ switch (rstdbyctl & RSX_STATUS_MASK) {
+ case RSX_STATUS_ON:
+ seq_printf(m, "on\n");
+ break;
+ case RSX_STATUS_RC1:
+ seq_printf(m, "RC1\n");
+ break;
+ case RSX_STATUS_RC1E:
+ seq_printf(m, "RC1E\n");
+ break;
+ case RSX_STATUS_RS1:
+ seq_printf(m, "RS1\n");
+ break;
+ case RSX_STATUS_RS2:
+ seq_printf(m, "RS2 (RC6)\n");
+ break;
+ case RSX_STATUS_RS3:
+ seq_printf(m, "RC3 (RC6+)\n");
+ break;
+ default:
+ seq_printf(m, "unknown\n");
+ break;
+ }
return 0;
}
@@ -1187,6 +1261,7 @@
static struct drm_info_list i915_debugfs_list[] = {
{"i915_capabilities", i915_capabilities, 0, 0},
{"i915_gem_objects", i915_gem_object_info, 0},
+ {"i915_gem_gtt", i915_gem_gtt_info, 0},
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0568dbd..844f3c9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1962,13 +1962,6 @@
/* enable GEM by default */
dev_priv->has_gem = 1;
- if (dev_priv->has_gem == 0 &&
- drm_core_check_feature(dev, DRIVER_MODESET)) {
- DRM_ERROR("kernel modesetting requires GEM, disabling driver.\n");
- ret = -ENODEV;
- goto out_workqueue_free;
- }
-
dev->driver->get_vblank_counter = i915_get_vblank_counter;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev)) {
@@ -2055,7 +2048,6 @@
intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
-out_workqueue_free:
destroy_workqueue(dev_priv->wq);
out_iomapfree:
io_mapping_free(dev_priv->mm.gtt_mapping);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 8724933..0de75a2 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -49,6 +49,9 @@
unsigned int i915_lvds_downclock = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
+bool i915_try_reset = true;
+module_param_named(reset, i915_try_reset, bool, 0600);
+
static struct drm_driver driver;
extern int intel_agp_enabled;
@@ -352,6 +355,9 @@
/* Resume the modeset for every activated CRTC */
drm_helper_resume_force_mode(dev);
+
+ if (dev_priv->renderctx && dev_priv->pwrctx)
+ ironlake_enable_rc6(dev);
}
intel_opregion_init(dev);
@@ -475,6 +481,9 @@
bool need_display = true;
int ret;
+ if (!i915_try_reset)
+ return 0;
+
if (!mutex_trylock(&dev->struct_mutex))
return -EBUSY;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index aac1bf3..385fc7e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -172,20 +172,21 @@
int page_count;
u32 gtt_offset;
u32 *pages[0];
- } *ringbuffer, *batchbuffer[2];
+ } *ringbuffer, *batchbuffer[I915_NUM_RINGS];
struct drm_i915_error_buffer {
- size_t size;
+ u32 size;
u32 name;
u32 seqno;
u32 gtt_offset;
u32 read_domains;
u32 write_domain;
- u32 fence_reg;
+ s32 fence_reg:5;
s32 pinned:2;
u32 tiling:2;
u32 dirty:1;
u32 purgeable:1;
u32 ring:4;
+ u32 agp_type:1;
} *active_bo, *pinned_bo;
u32 active_bo_count, pinned_bo_count;
struct intel_overlay_error_state *overlay;
@@ -332,6 +333,7 @@
/* LVDS info */
int backlight_level; /* restore backlight to this value */
+ bool backlight_enabled;
struct drm_display_mode *panel_fixed_mode;
struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
@@ -794,6 +796,7 @@
*/
struct hlist_node exec_node;
unsigned long exec_handle;
+ struct drm_i915_gem_exec_object2 *exec_entry;
/**
* Current offset of the object in GTT space.
@@ -1006,12 +1009,6 @@
extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc);
extern int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
-extern void i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask);
-extern void ironlake_enable_graphics_irq(drm_i915_private_t *dev_priv,
- u32 mask);
-extern void ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv,
- u32 mask);
void
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
@@ -1091,10 +1088,10 @@
struct drm_file *file_priv);
void i915_gem_load(struct drm_device *dev);
int i915_gem_init_object(struct drm_gem_object *obj);
-void i915_gem_flush_ring(struct drm_device *dev,
- struct intel_ring_buffer *ring,
- uint32_t invalidate_domains,
- uint32_t flush_domains);
+int __must_check i915_gem_flush_ring(struct drm_device *dev,
+ struct intel_ring_buffer *ring,
+ uint32_t invalidate_domains,
+ uint32_t flush_domains);
struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
size_t size);
void i915_gem_free_object(struct drm_gem_object *obj);
@@ -1265,6 +1262,7 @@
extern void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval);
extern bool intel_fbc_enabled(struct drm_device *dev);
extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
+extern void ironlake_enable_rc6(struct drm_device *dev);
extern void gen6_set_rps(struct drm_device *dev, u8 val);
extern void intel_detect_pch (struct drm_device *dev);
extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index c79c0b6..3dfc848 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -35,18 +35,18 @@
#include <linux/swap.h>
#include <linux/pci.h>
-static void i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
+static __must_check int i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj);
-static int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj,
- bool write);
-static int i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
- uint64_t offset,
- uint64_t size);
+static __must_check int i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj,
+ bool write);
+static __must_check int i915_gem_object_set_cpu_read_domain_range(struct drm_i915_gem_object *obj,
+ uint64_t offset,
+ uint64_t size);
static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_i915_gem_object *obj);
-static int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
- unsigned alignment,
- bool map_and_fenceable);
+static __must_check int i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
+ unsigned alignment,
+ bool map_and_fenceable);
static void i915_gem_clear_fence_reg(struct drm_device *dev,
struct drm_i915_fence_reg *reg);
static int i915_gem_phys_pwrite(struct drm_device *dev,
@@ -1935,6 +1935,8 @@
{
drm_i915_private_t *dev_priv;
struct drm_device *dev;
+ bool idle;
+ int i;
dev_priv = container_of(work, drm_i915_private_t,
mm.retire_work.work);
@@ -1948,11 +1950,31 @@
i915_gem_retire_requests(dev);
- if (!dev_priv->mm.suspended &&
- (!list_empty(&dev_priv->ring[RCS].request_list) ||
- !list_empty(&dev_priv->ring[VCS].request_list) ||
- !list_empty(&dev_priv->ring[BCS].request_list)))
+ /* Send a periodic flush down the ring so we don't hold onto GEM
+ * objects indefinitely.
+ */
+ idle = true;
+ for (i = 0; i < I915_NUM_RINGS; i++) {
+ struct intel_ring_buffer *ring = &dev_priv->ring[i];
+
+ if (!list_empty(&ring->gpu_write_list)) {
+ struct drm_i915_gem_request *request;
+ int ret;
+
+ ret = i915_gem_flush_ring(dev, ring, 0,
+ I915_GEM_GPU_DOMAINS);
+ request = kzalloc(sizeof(*request), GFP_KERNEL);
+ if (ret || request == NULL ||
+ i915_add_request(dev, NULL, request, ring))
+ kfree(request);
+ }
+
+ idle &= list_empty(&ring->request_list);
+ }
+
+ if (!dev_priv->mm.suspended && !idle)
queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+
mutex_unlock(&dev->struct_mutex);
}
@@ -2142,25 +2164,37 @@
return ret;
}
-void
+int
i915_gem_flush_ring(struct drm_device *dev,
struct intel_ring_buffer *ring,
uint32_t invalidate_domains,
uint32_t flush_domains)
{
- ring->flush(ring, invalidate_domains, flush_domains);
+ int ret;
+
+ ret = ring->flush(ring, invalidate_domains, flush_domains);
+ if (ret)
+ return ret;
+
i915_gem_process_flushing_list(dev, flush_domains, ring);
+ return 0;
}
static int i915_ring_idle(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
+ int ret;
+
if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
return 0;
- if (!list_empty(&ring->gpu_write_list))
- i915_gem_flush_ring(dev, ring,
+ if (!list_empty(&ring->gpu_write_list)) {
+ ret = i915_gem_flush_ring(dev, ring,
I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
+ if (ret)
+ return ret;
+ }
+
return i915_wait_request(dev,
i915_gem_next_request_seqno(dev, ring),
ring);
@@ -2370,10 +2404,13 @@
int ret;
if (obj->fenced_gpu_access) {
- if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
- i915_gem_flush_ring(obj->base.dev,
- obj->last_fenced_ring,
- 0, obj->base.write_domain);
+ if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+ ret = i915_gem_flush_ring(obj->base.dev,
+ obj->last_fenced_ring,
+ 0, obj->base.write_domain);
+ if (ret)
+ return ret;
+ }
obj->fenced_gpu_access = false;
}
@@ -2393,6 +2430,12 @@
obj->last_fenced_ring = NULL;
}
+ /* Ensure that all CPU reads are completed before installing a fence
+ * and all writes before removing the fence.
+ */
+ if (obj->base.read_domains & I915_GEM_DOMAIN_GTT)
+ mb();
+
return 0;
}
@@ -2523,9 +2566,12 @@
return ret;
} else if (obj->tiling_changed) {
if (obj->fenced_gpu_access) {
- if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
- i915_gem_flush_ring(obj->base.dev, obj->ring,
- 0, obj->base.write_domain);
+ if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+ ret = i915_gem_flush_ring(obj->base.dev, obj->ring,
+ 0, obj->base.write_domain);
+ if (ret)
+ return ret;
+ }
obj->fenced_gpu_access = false;
}
@@ -2736,10 +2782,8 @@
obj->gtt_space = NULL;
if (ret == -ENOMEM) {
- /* first try to clear up some space from the GTT */
- ret = i915_gem_evict_something(dev, size,
- alignment,
- map_and_fenceable);
+ /* first try to reclaim some memory by clearing the GTT */
+ ret = i915_gem_evict_everything(dev, false);
if (ret) {
/* now try to shrink everyone else */
if (gfpmask) {
@@ -2747,7 +2791,7 @@
goto search_free;
}
- return ret;
+ return -ENOMEM;
}
goto search_free;
@@ -2762,9 +2806,7 @@
drm_mm_put_block(obj->gtt_space);
obj->gtt_space = NULL;
- ret = i915_gem_evict_something(dev, size,
- alignment, map_and_fenceable);
- if (ret)
+ if (i915_gem_evict_everything(dev, false))
return ret;
goto search_free;
@@ -2811,17 +2853,16 @@
}
/** Flushes any GPU write domain for the object if it's dirty. */
-static void
+static int
i915_gem_object_flush_gpu_write_domain(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
if ((obj->base.write_domain & I915_GEM_GPU_DOMAINS) == 0)
- return;
+ return 0;
/* Queue the GPU write cache flushing we need. */
- i915_gem_flush_ring(dev, obj->ring, 0, obj->base.write_domain);
- BUG_ON(obj->base.write_domain);
+ return i915_gem_flush_ring(dev, obj->ring, 0, obj->base.write_domain);
}
/** Flushes the GTT write domain for the object if it's dirty. */
@@ -2833,10 +2874,16 @@
if (obj->base.write_domain != I915_GEM_DOMAIN_GTT)
return;
- /* No actual flushing is required for the GTT write domain. Writes
+ /* No actual flushing is required for the GTT write domain. Writes
* to it immediately go to main memory as far as we know, so there's
* no chipset flush. It also doesn't land in render cache.
+ *
+ * However, we do have to enforce the order so that all writes through
+ * the GTT land before any writes to the device, such as updates to
+ * the GATT itself.
*/
+ wmb();
+
i915_gem_release_mmap(obj);
old_write_domain = obj->base.write_domain;
@@ -2882,7 +2929,10 @@
if (obj->gtt_space == NULL)
return -EINVAL;
- i915_gem_object_flush_gpu_write_domain(obj);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
+ if (ret)
+ return ret;
+
if (obj->pending_gpu_write || write) {
ret = i915_gem_object_wait_rendering(obj, true);
if (ret)
@@ -2927,7 +2977,10 @@
if (obj->gtt_space == NULL)
return -EINVAL;
- i915_gem_object_flush_gpu_write_domain(obj);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
+ if (ret)
+ return ret;
+
/* Currently, we are always called from an non-interruptible context. */
if (pipelined != obj->ring) {
@@ -2952,12 +3005,17 @@
i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
bool interruptible)
{
+ int ret;
+
if (!obj->active)
return 0;
- if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
- i915_gem_flush_ring(obj->base.dev, obj->ring,
- 0, obj->base.write_domain);
+ if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
+ ret = i915_gem_flush_ring(obj->base.dev, obj->ring,
+ 0, obj->base.write_domain);
+ if (ret)
+ return ret;
+ }
return i915_gem_object_wait_rendering(obj, interruptible);
}
@@ -2974,7 +3032,10 @@
uint32_t old_write_domain, old_read_domains;
int ret;
- i915_gem_object_flush_gpu_write_domain(obj);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
+ if (ret)
+ return ret;
+
ret = i915_gem_object_wait_rendering(obj, true);
if (ret)
return ret;
@@ -3069,7 +3130,10 @@
if (offset == 0 && size == obj->base.size)
return i915_gem_object_set_to_cpu_domain(obj, 0);
- i915_gem_object_flush_gpu_write_domain(obj);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
+ if (ret)
+ return ret;
+
ret = i915_gem_object_wait_rendering(obj, true);
if (ret)
return ret;
@@ -3362,8 +3426,8 @@
* flush earlier is beneficial.
*/
if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) {
- i915_gem_flush_ring(dev, obj->ring,
- 0, obj->base.write_domain);
+ ret = i915_gem_flush_ring(dev, obj->ring,
+ 0, obj->base.write_domain);
} else if (obj->ring->outstanding_lazy_request ==
obj->last_rendering_seqno) {
struct drm_i915_gem_request *request;
diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index 78b8cf9..3d39005 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -127,9 +127,15 @@
}
/* Nothing found, clean up and bail out! */
- list_for_each_entry(obj, &unwind_list, exec_list) {
+ while (!list_empty(&unwind_list)) {
+ obj = list_first_entry(&unwind_list,
+ struct drm_i915_gem_object,
+ exec_list);
+
ret = drm_mm_scan_remove_block(obj->gtt_space);
BUG_ON(ret);
+
+ list_del_init(&obj->exec_list);
drm_gem_object_unreference(&obj->base);
}
@@ -162,6 +168,7 @@
exec_list);
if (ret == 0)
ret = i915_gem_object_unbind(obj);
+
list_del_init(&obj->exec_list);
drm_gem_object_unreference(&obj->base);
}
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 61129e6..e698343 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -268,7 +268,6 @@
static int
i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
struct eb_objects *eb,
- struct drm_i915_gem_exec_object2 *entry,
struct drm_i915_gem_relocation_entry *reloc)
{
struct drm_device *dev = obj->base.dev;
@@ -411,10 +410,10 @@
static int
i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
- struct eb_objects *eb,
- struct drm_i915_gem_exec_object2 *entry)
+ struct eb_objects *eb)
{
struct drm_i915_gem_relocation_entry __user *user_relocs;
+ struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
int i, ret;
user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
@@ -426,7 +425,7 @@
sizeof(reloc)))
return -EFAULT;
- ret = i915_gem_execbuffer_relocate_entry(obj, eb, entry, &reloc);
+ ret = i915_gem_execbuffer_relocate_entry(obj, eb, &reloc);
if (ret)
return ret;
@@ -442,13 +441,13 @@
static int
i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
struct eb_objects *eb,
- struct drm_i915_gem_exec_object2 *entry,
struct drm_i915_gem_relocation_entry *relocs)
{
+ const struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
int i, ret;
for (i = 0; i < entry->relocation_count; i++) {
- ret = i915_gem_execbuffer_relocate_entry(obj, eb, entry, &relocs[i]);
+ ret = i915_gem_execbuffer_relocate_entry(obj, eb, &relocs[i]);
if (ret)
return ret;
}
@@ -459,8 +458,7 @@
static int
i915_gem_execbuffer_relocate(struct drm_device *dev,
struct eb_objects *eb,
- struct list_head *objects,
- struct drm_i915_gem_exec_object2 *exec)
+ struct list_head *objects)
{
struct drm_i915_gem_object *obj;
int ret;
@@ -468,7 +466,7 @@
list_for_each_entry(obj, objects, exec_list) {
obj->base.pending_read_domains = 0;
obj->base.pending_write_domain = 0;
- ret = i915_gem_execbuffer_relocate_object(obj, eb, exec++);
+ ret = i915_gem_execbuffer_relocate_object(obj, eb);
if (ret)
return ret;
}
@@ -479,13 +477,36 @@
static int
i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
struct drm_file *file,
- struct list_head *objects,
- struct drm_i915_gem_exec_object2 *exec)
+ struct list_head *objects)
{
struct drm_i915_gem_object *obj;
- struct drm_i915_gem_exec_object2 *entry;
int ret, retry;
bool has_fenced_gpu_access = INTEL_INFO(ring->dev)->gen < 4;
+ struct list_head ordered_objects;
+
+ INIT_LIST_HEAD(&ordered_objects);
+ while (!list_empty(objects)) {
+ struct drm_i915_gem_exec_object2 *entry;
+ bool need_fence, need_mappable;
+
+ obj = list_first_entry(objects,
+ struct drm_i915_gem_object,
+ exec_list);
+ entry = obj->exec_entry;
+
+ need_fence =
+ has_fenced_gpu_access &&
+ entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+ obj->tiling_mode != I915_TILING_NONE;
+ need_mappable =
+ entry->relocation_count ? true : need_fence;
+
+ if (need_mappable)
+ list_move(&obj->exec_list, &ordered_objects);
+ else
+ list_move_tail(&obj->exec_list, &ordered_objects);
+ }
+ list_splice(&ordered_objects, objects);
/* Attempt to pin all of the buffers into the GTT.
* This is done in 3 phases:
@@ -504,14 +525,11 @@
ret = 0;
/* Unbind any ill-fitting objects or pin. */
- entry = exec;
list_for_each_entry(obj, objects, exec_list) {
+ struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
bool need_fence, need_mappable;
-
- if (!obj->gtt_space) {
- entry++;
+ if (!obj->gtt_space)
continue;
- }
need_fence =
has_fenced_gpu_access &&
@@ -534,8 +552,8 @@
}
/* Bind fresh objects */
- entry = exec;
list_for_each_entry(obj, objects, exec_list) {
+ struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
bool need_fence;
need_fence =
@@ -570,7 +588,6 @@
}
entry->offset = obj->gtt_offset;
- entry++;
}
/* Decrement pin count for bound objects */
@@ -622,7 +639,7 @@
int i, total, ret;
/* We may process another execbuffer during the unlock... */
- while (list_empty(objects)) {
+ while (!list_empty(objects)) {
obj = list_first_entry(objects,
struct drm_i915_gem_object,
exec_list);
@@ -665,7 +682,6 @@
}
/* reacquire the objects */
- INIT_LIST_HEAD(objects);
eb_reset(eb);
for (i = 0; i < count; i++) {
struct drm_i915_gem_object *obj;
@@ -681,10 +697,11 @@
list_add_tail(&obj->exec_list, objects);
obj->exec_handle = exec[i].handle;
+ obj->exec_entry = &exec[i];
eb_add_object(eb, obj);
}
- ret = i915_gem_execbuffer_reserve(ring, file, objects, exec);
+ ret = i915_gem_execbuffer_reserve(ring, file, objects);
if (ret)
goto err;
@@ -693,7 +710,6 @@
obj->base.pending_read_domains = 0;
obj->base.pending_write_domain = 0;
ret = i915_gem_execbuffer_relocate_object_slow(obj, eb,
- exec,
reloc + total);
if (ret)
goto err;
@@ -713,25 +729,34 @@
return ret;
}
-static void
+static int
i915_gem_execbuffer_flush(struct drm_device *dev,
uint32_t invalidate_domains,
uint32_t flush_domains,
uint32_t flush_rings)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- int i;
+ int i, ret;
if (flush_domains & I915_GEM_DOMAIN_CPU)
intel_gtt_chipset_flush();
+ if (flush_domains & I915_GEM_DOMAIN_GTT)
+ wmb();
+
if ((flush_domains | invalidate_domains) & I915_GEM_GPU_DOMAINS) {
for (i = 0; i < I915_NUM_RINGS; i++)
- if (flush_rings & (1 << i))
- i915_gem_flush_ring(dev, &dev_priv->ring[i],
- invalidate_domains,
- flush_domains);
+ if (flush_rings & (1 << i)) {
+ ret = i915_gem_flush_ring(dev,
+ &dev_priv->ring[i],
+ invalidate_domains,
+ flush_domains);
+ if (ret)
+ return ret;
+ }
}
+
+ return 0;
}
static int
@@ -795,10 +820,12 @@
cd.invalidate_domains,
cd.flush_domains);
#endif
- i915_gem_execbuffer_flush(ring->dev,
- cd.invalidate_domains,
- cd.flush_domains,
- cd.flush_rings);
+ ret = i915_gem_execbuffer_flush(ring->dev,
+ cd.invalidate_domains,
+ cd.flush_domains,
+ cd.flush_rings);
+ if (ret)
+ return ret;
}
list_for_each_entry(obj, objects, exec_list) {
@@ -921,7 +948,7 @@
struct intel_ring_buffer *ring)
{
struct drm_i915_gem_request *request;
- u32 flush_domains;
+ u32 invalidate;
/*
* Ensure that the commands in the batch buffer are
@@ -929,11 +956,13 @@
*
* The sampler always gets flushed on i965 (sigh).
*/
- flush_domains = 0;
+ invalidate = I915_GEM_DOMAIN_COMMAND;
if (INTEL_INFO(dev)->gen >= 4)
- flush_domains |= I915_GEM_DOMAIN_SAMPLER;
-
- ring->flush(ring, I915_GEM_DOMAIN_COMMAND, flush_domains);
+ invalidate |= I915_GEM_DOMAIN_SAMPLER;
+ if (ring->flush(ring, invalidate, 0)) {
+ i915_gem_next_request_seqno(dev, ring);
+ return;
+ }
/* Add a breadcrumb for the completion of the batch buffer */
request = kzalloc(sizeof(*request), GFP_KERNEL);
@@ -1098,16 +1127,22 @@
list_add_tail(&obj->exec_list, &objects);
obj->exec_handle = exec[i].handle;
+ obj->exec_entry = &exec[i];
eb_add_object(eb, obj);
}
+ /* take note of the batch buffer before we might reorder the lists */
+ batch_obj = list_entry(objects.prev,
+ struct drm_i915_gem_object,
+ exec_list);
+
/* Move the objects en-masse into the GTT, evicting if necessary. */
- ret = i915_gem_execbuffer_reserve(ring, file, &objects, exec);
+ ret = i915_gem_execbuffer_reserve(ring, file, &objects);
if (ret)
goto err;
/* The objects are in their final locations, apply the relocations. */
- ret = i915_gem_execbuffer_relocate(dev, eb, &objects, exec);
+ ret = i915_gem_execbuffer_relocate(dev, eb, &objects);
if (ret) {
if (ret == -EFAULT) {
ret = i915_gem_execbuffer_relocate_slow(dev, file, ring,
@@ -1121,9 +1156,6 @@
}
/* Set the pending read domains for the batch buffer to COMMAND */
- batch_obj = list_entry(objects.prev,
- struct drm_i915_gem_object,
- exec_list);
if (batch_obj->base.pending_write_domain) {
DRM_ERROR("Attempting to use self-modifying batch buffer\n");
ret = -EINVAL;
@@ -1340,4 +1372,3 @@
drm_free_large(exec2_list);
return ret;
}
-
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 86673e7..70433ae 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -85,15 +85,11 @@
void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
{
- struct drm_device *dev = obj->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (dev_priv->mm.gtt->needs_dmar) {
- intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
- obj->sg_list = NULL;
- obj->num_sg = 0;
- }
-
intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
obj->base.size >> PAGE_SHIFT);
+
+ if (obj->sg_list) {
+ intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
+ obj->sg_list = NULL;
+ }
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 0dadc02..e418e8b 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -64,26 +64,6 @@
#define DRM_I915_VBLANK_PIPE_ALL (DRM_I915_VBLANK_PIPE_A | \
DRM_I915_VBLANK_PIPE_B)
-void
-ironlake_enable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
- if ((dev_priv->gt_irq_mask & mask) != 0) {
- dev_priv->gt_irq_mask &= ~mask;
- I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
- POSTING_READ(GTIMR);
- }
-}
-
-void
-ironlake_disable_graphics_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
- if ((dev_priv->gt_irq_mask & mask) != mask) {
- dev_priv->gt_irq_mask |= mask;
- I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
- POSTING_READ(GTIMR);
- }
-}
-
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -105,26 +85,6 @@
}
}
-void
-i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
- if ((dev_priv->irq_mask & mask) != 0) {
- dev_priv->irq_mask &= ~mask;
- I915_WRITE(IMR, dev_priv->irq_mask);
- POSTING_READ(IMR);
- }
-}
-
-void
-i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
-{
- if ((dev_priv->irq_mask & mask) != mask) {
- dev_priv->irq_mask |= mask;
- I915_WRITE(IMR, dev_priv->irq_mask);
- POSTING_READ(IMR);
- }
-}
-
static inline u32
i915_pipestat(int pipe)
{
@@ -389,9 +349,12 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 seqno = ring->get_seqno(ring);
- ring->irq_seqno = seqno;
+
trace_i915_gem_request_complete(dev, seqno);
+
+ ring->irq_seqno = seqno;
wake_up_all(&ring->irq_queue);
+
dev_priv->hangcheck_count = 0;
mod_timer(&dev_priv->hangcheck_timer,
jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD));
@@ -435,6 +398,50 @@
I915_WRITE(GEN6_PMIIR, pm_iir);
}
+static void pch_irq_handler(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 pch_iir;
+
+ pch_iir = I915_READ(SDEIIR);
+
+ if (pch_iir & SDE_AUDIO_POWER_MASK)
+ DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
+ (pch_iir & SDE_AUDIO_POWER_MASK) >>
+ SDE_AUDIO_POWER_SHIFT);
+
+ if (pch_iir & SDE_GMBUS)
+ DRM_DEBUG_DRIVER("PCH GMBUS interrupt\n");
+
+ if (pch_iir & SDE_AUDIO_HDCP_MASK)
+ DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
+
+ if (pch_iir & SDE_AUDIO_TRANS_MASK)
+ DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
+
+ if (pch_iir & SDE_POISON)
+ DRM_ERROR("PCH poison interrupt\n");
+
+ if (pch_iir & SDE_FDI_MASK) {
+ u32 fdia, fdib;
+
+ fdia = I915_READ(FDI_RXA_IIR);
+ fdib = I915_READ(FDI_RXB_IIR);
+ DRM_DEBUG_DRIVER("PCH FDI RX interrupt; FDI RXA IIR: 0x%08x, FDI RXB IIR: 0x%08x\n", fdia, fdib);
+ }
+
+ if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
+ DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
+
+ if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
+ DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
+
+ if (pch_iir & SDE_TRANSB_FIFO_UNDER)
+ DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n");
+ if (pch_iir & SDE_TRANSA_FIFO_UNDER)
+ DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
+}
+
static irqreturn_t ironlake_irq_handler(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -502,8 +509,11 @@
drm_handle_vblank(dev, 1);
/* check event from PCH */
- if ((de_iir & DE_PCH_EVENT) && (pch_iir & hotplug_mask))
- queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+ if (de_iir & DE_PCH_EVENT) {
+ if (pch_iir & hotplug_mask)
+ queue_work(dev_priv->wq, &dev_priv->hotplug_work);
+ pch_irq_handler(dev);
+ }
if (de_iir & DE_PCU_EVENT) {
I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
@@ -556,10 +566,9 @@
#ifdef CONFIG_DEBUG_FS
static struct drm_i915_error_object *
-i915_error_object_create(struct drm_device *dev,
+i915_error_object_create(struct drm_i915_private *dev_priv,
struct drm_i915_gem_object *src)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_error_object *dst;
int page, page_count;
u32 reloc_offset;
@@ -632,52 +641,6 @@
kfree(error);
}
-static u32
-i915_get_bbaddr(struct drm_device *dev, u32 *ring)
-{
- u32 cmd;
-
- if (IS_I830(dev) || IS_845G(dev))
- cmd = MI_BATCH_BUFFER;
- else if (INTEL_INFO(dev)->gen >= 4)
- cmd = (MI_BATCH_BUFFER_START | (2 << 6) |
- MI_BATCH_NON_SECURE_I965);
- else
- cmd = (MI_BATCH_BUFFER_START | (2 << 6));
-
- return ring[0] == cmd ? ring[1] : 0;
-}
-
-static u32
-i915_ringbuffer_last_batch(struct drm_device *dev,
- struct intel_ring_buffer *ring)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 head, bbaddr;
- u32 *val;
-
- /* Locate the current position in the ringbuffer and walk back
- * to find the most recently dispatched batch buffer.
- */
- head = I915_READ_HEAD(ring) & HEAD_ADDR;
-
- val = (u32 *)(ring->virtual_start + head);
- while (--val >= (u32 *)ring->virtual_start) {
- bbaddr = i915_get_bbaddr(dev, val);
- if (bbaddr)
- return bbaddr;
- }
-
- val = (u32 *)(ring->virtual_start + ring->size);
- while (--val >= (u32 *)ring->virtual_start) {
- bbaddr = i915_get_bbaddr(dev, val);
- if (bbaddr)
- return bbaddr;
- }
-
- return 0;
-}
-
static u32 capture_bo_list(struct drm_i915_error_buffer *err,
int count,
struct list_head *head)
@@ -702,6 +665,7 @@
err->dirty = obj->dirty;
err->purgeable = obj->madv != I915_MADV_WILLNEED;
err->ring = obj->ring ? obj->ring->id : 0;
+ err->agp_type = obj->agp_type == AGP_USER_CACHED_MEMORY;
if (++i == count)
break;
@@ -741,6 +705,36 @@
}
}
+static struct drm_i915_error_object *
+i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,
+ struct intel_ring_buffer *ring)
+{
+ struct drm_i915_gem_object *obj;
+ u32 seqno;
+
+ if (!ring->get_seqno)
+ return NULL;
+
+ seqno = ring->get_seqno(ring);
+ list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
+ if (obj->ring != ring)
+ continue;
+
+ if (!i915_seqno_passed(obj->last_rendering_seqno, seqno))
+ continue;
+
+ if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0)
+ continue;
+
+ /* We need to copy these to an anonymous buffer as the simplest
+ * method to avoid being overwritten by userspace.
+ */
+ return i915_error_object_create(dev_priv, obj);
+ }
+
+ return NULL;
+}
+
/**
* i915_capture_error_state - capture an error record for later analysis
* @dev: drm device
@@ -755,10 +749,8 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
struct drm_i915_error_state *error;
- struct drm_i915_gem_object *batchbuffer[2];
unsigned long flags;
- u32 bbaddr;
- int count;
+ int i;
spin_lock_irqsave(&dev_priv->error_lock, flags);
error = dev_priv->first_error;
@@ -817,83 +809,30 @@
}
i915_gem_record_fences(dev, error);
- bbaddr = i915_ringbuffer_last_batch(dev, &dev_priv->ring[RCS]);
-
- /* Grab the current batchbuffer, most likely to have crashed. */
- batchbuffer[0] = NULL;
- batchbuffer[1] = NULL;
- count = 0;
- list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
- if (batchbuffer[0] == NULL &&
- bbaddr >= obj->gtt_offset &&
- bbaddr < obj->gtt_offset + obj->base.size)
- batchbuffer[0] = obj;
-
- if (batchbuffer[1] == NULL &&
- error->acthd >= obj->gtt_offset &&
- error->acthd < obj->gtt_offset + obj->base.size)
- batchbuffer[1] = obj;
-
- count++;
- }
- /* Scan the other lists for completeness for those bizarre errors. */
- if (batchbuffer[0] == NULL || batchbuffer[1] == NULL) {
- list_for_each_entry(obj, &dev_priv->mm.flushing_list, mm_list) {
- if (batchbuffer[0] == NULL &&
- bbaddr >= obj->gtt_offset &&
- bbaddr < obj->gtt_offset + obj->base.size)
- batchbuffer[0] = obj;
-
- if (batchbuffer[1] == NULL &&
- error->acthd >= obj->gtt_offset &&
- error->acthd < obj->gtt_offset + obj->base.size)
- batchbuffer[1] = obj;
-
- if (batchbuffer[0] && batchbuffer[1])
- break;
- }
- }
- if (batchbuffer[0] == NULL || batchbuffer[1] == NULL) {
- list_for_each_entry(obj, &dev_priv->mm.inactive_list, mm_list) {
- if (batchbuffer[0] == NULL &&
- bbaddr >= obj->gtt_offset &&
- bbaddr < obj->gtt_offset + obj->base.size)
- batchbuffer[0] = obj;
-
- if (batchbuffer[1] == NULL &&
- error->acthd >= obj->gtt_offset &&
- error->acthd < obj->gtt_offset + obj->base.size)
- batchbuffer[1] = obj;
-
- if (batchbuffer[0] && batchbuffer[1])
- break;
- }
- }
-
- /* We need to copy these to an anonymous buffer as the simplest
- * method to avoid being overwritten by userspace.
- */
- error->batchbuffer[0] = i915_error_object_create(dev, batchbuffer[0]);
- if (batchbuffer[1] != batchbuffer[0])
- error->batchbuffer[1] = i915_error_object_create(dev, batchbuffer[1]);
- else
- error->batchbuffer[1] = NULL;
+ /* Record the active batchbuffers */
+ for (i = 0; i < I915_NUM_RINGS; i++)
+ error->batchbuffer[i] =
+ i915_error_first_batchbuffer(dev_priv,
+ &dev_priv->ring[i]);
/* Record the ringbuffer */
- error->ringbuffer = i915_error_object_create(dev,
+ error->ringbuffer = i915_error_object_create(dev_priv,
dev_priv->ring[RCS].obj);
/* Record buffers on the active and pinned lists. */
error->active_bo = NULL;
error->pinned_bo = NULL;
- error->active_bo_count = count;
+ i = 0;
+ list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list)
+ i++;
+ error->active_bo_count = i;
list_for_each_entry(obj, &dev_priv->mm.pinned_list, mm_list)
- count++;
- error->pinned_bo_count = count - error->active_bo_count;
+ i++;
+ error->pinned_bo_count = i - error->active_bo_count;
- if (count) {
- error->active_bo = kmalloc(sizeof(*error->active_bo)*count,
+ if (i) {
+ error->active_bo = kmalloc(sizeof(*error->active_bo)*i,
GFP_ATOMIC);
if (error->active_bo)
error->pinned_bo =
@@ -1673,11 +1612,6 @@
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
- if (IS_GEN6(dev)) {
- I915_WRITE(GEN6_RENDER_IMR, ~GEN6_RENDER_USER_INTERRUPT);
- I915_WRITE(GEN6_BSD_IMR, ~GEN6_BSD_USER_INTERRUPT);
- I915_WRITE(GEN6_BLITTER_IMR, ~GEN6_BLITTER_USER_INTERRUPT);
- }
if (IS_GEN6(dev))
render_irqs =
@@ -1698,6 +1632,9 @@
} else {
hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
+ hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK;
+ I915_WRITE(FDI_RXA_IMR, 0);
+ I915_WRITE(FDI_RXB_IMR, 0);
}
dev_priv->pch_irq_mask = ~hotplug_mask;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8f948a6..40a407f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -145,6 +145,8 @@
#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */
#define MI_INVALIDATE_ISP (1 << 5) /* invalidate indirect state pointers */
#define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0)
+#define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0)
+#define MI_SUSPEND_FLUSH_EN (1<<0)
#define MI_REPORT_HEAD MI_INSTR(0x07, 0)
#define MI_OVERLAY_FLIP MI_INSTR(0x11,0)
#define MI_OVERLAY_CONTINUE (0x0<<21)
@@ -159,6 +161,7 @@
#define MI_MM_SPACE_PHYSICAL (0<<8)
#define MI_SAVE_EXT_STATE_EN (1<<3)
#define MI_RESTORE_EXT_STATE_EN (1<<2)
+#define MI_FORCE_RESTORE (1<<1)
#define MI_RESTORE_INHIBIT (1<<0)
#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)
#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
@@ -288,6 +291,7 @@
#define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
#define RING_ACTHD(base) ((base)+0x74)
#define RING_NOPID(base) ((base)+0x94)
+#define RING_IMR(base) ((base)+0xa8)
#define TAIL_ADDR 0x001FFFF8
#define HEAD_WRAP_COUNT 0xFFE00000
#define HEAD_WRAP_ONE 0x00200000
@@ -1130,9 +1134,50 @@
#define RCBMINAVG 0x111a0
#define RCUPEI 0x111b0
#define RCDNEI 0x111b4
-#define MCHBAR_RENDER_STANDBY 0x111b8
-#define RCX_SW_EXIT (1<<23)
-#define RSX_STATUS_MASK 0x00700000
+#define RSTDBYCTL 0x111b8
+#define RS1EN (1<<31)
+#define RS2EN (1<<30)
+#define RS3EN (1<<29)
+#define D3RS3EN (1<<28) /* Display D3 imlies RS3 */
+#define SWPROMORSX (1<<27) /* RSx promotion timers ignored */
+#define RCWAKERW (1<<26) /* Resetwarn from PCH causes wakeup */
+#define DPRSLPVREN (1<<25) /* Fast voltage ramp enable */
+#define GFXTGHYST (1<<24) /* Hysteresis to allow trunk gating */
+#define RCX_SW_EXIT (1<<23) /* Leave RSx and prevent re-entry */
+#define RSX_STATUS_MASK (7<<20)
+#define RSX_STATUS_ON (0<<20)
+#define RSX_STATUS_RC1 (1<<20)
+#define RSX_STATUS_RC1E (2<<20)
+#define RSX_STATUS_RS1 (3<<20)
+#define RSX_STATUS_RS2 (4<<20) /* aka rc6 */
+#define RSX_STATUS_RSVD (5<<20) /* deep rc6 unsupported on ilk */
+#define RSX_STATUS_RS3 (6<<20) /* rs3 unsupported on ilk */
+#define RSX_STATUS_RSVD2 (7<<20)
+#define UWRCRSXE (1<<19) /* wake counter limit prevents rsx */
+#define RSCRP (1<<18) /* rs requests control on rs1/2 reqs */
+#define JRSC (1<<17) /* rsx coupled to cpu c-state */
+#define RS2INC0 (1<<16) /* allow rs2 in cpu c0 */
+#define RS1CONTSAV_MASK (3<<14)
+#define RS1CONTSAV_NO_RS1 (0<<14) /* rs1 doesn't save/restore context */
+#define RS1CONTSAV_RSVD (1<<14)
+#define RS1CONTSAV_SAVE_RS1 (2<<14) /* rs1 saves context */
+#define RS1CONTSAV_FULL_RS1 (3<<14) /* rs1 saves and restores context */
+#define NORMSLEXLAT_MASK (3<<12)
+#define SLOW_RS123 (0<<12)
+#define SLOW_RS23 (1<<12)
+#define SLOW_RS3 (2<<12)
+#define NORMAL_RS123 (3<<12)
+#define RCMODE_TIMEOUT (1<<11) /* 0 is eval interval method */
+#define IMPROMOEN (1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */
+#define RCENTSYNC (1<<9) /* rs coupled to cpu c-state (3/6/7) */
+#define STATELOCK (1<<7) /* locked to rs_cstate if 0 */
+#define RS_CSTATE_MASK (3<<4)
+#define RS_CSTATE_C367_RS1 (0<<4)
+#define RS_CSTATE_C36_RS1_C7_RS2 (1<<4)
+#define RS_CSTATE_RSVD (2<<4)
+#define RS_CSTATE_C367_RS2 (3<<4)
+#define REDSAVES (1<<3) /* no context save if was idle during rs0 */
+#define REDRESTORES (1<<2) /* no restore if was idle during rs0 */
#define VIDCTL 0x111c0
#define VIDSTS 0x111c8
#define VIDSTART 0x111cc /* 8 bits */
@@ -2345,8 +2390,13 @@
/* Memory latency timer register */
#define MLTR_ILK 0x11222
+#define MLTR_WM1_SHIFT 0
+#define MLTR_WM2_SHIFT 8
/* the unit of memory self-refresh latency time is 0.5us */
#define ILK_SRLT_MASK 0x3f
+#define ILK_LATENCY(shift) (I915_READ(MLTR_ILK) >> (shift) & ILK_SRLT_MASK)
+#define ILK_READ_WM1_LATENCY() ILK_LATENCY(MLTR_WM1_SHIFT)
+#define ILK_READ_WM2_LATENCY() ILK_LATENCY(MLTR_WM2_SHIFT)
/* define the fifo size on Ironlake */
#define ILK_DISPLAY_FIFO 128
@@ -2728,12 +2778,41 @@
/* PCH */
/* south display engine interrupt */
+#define SDE_AUDIO_POWER_D (1 << 27)
+#define SDE_AUDIO_POWER_C (1 << 26)
+#define SDE_AUDIO_POWER_B (1 << 25)
+#define SDE_AUDIO_POWER_SHIFT (25)
+#define SDE_AUDIO_POWER_MASK (7 << SDE_AUDIO_POWER_SHIFT)
+#define SDE_GMBUS (1 << 24)
+#define SDE_AUDIO_HDCP_TRANSB (1 << 23)
+#define SDE_AUDIO_HDCP_TRANSA (1 << 22)
+#define SDE_AUDIO_HDCP_MASK (3 << 22)
+#define SDE_AUDIO_TRANSB (1 << 21)
+#define SDE_AUDIO_TRANSA (1 << 20)
+#define SDE_AUDIO_TRANS_MASK (3 << 20)
+#define SDE_POISON (1 << 19)
+/* 18 reserved */
+#define SDE_FDI_RXB (1 << 17)
+#define SDE_FDI_RXA (1 << 16)
+#define SDE_FDI_MASK (3 << 16)
+#define SDE_AUXD (1 << 15)
+#define SDE_AUXC (1 << 14)
+#define SDE_AUXB (1 << 13)
+#define SDE_AUX_MASK (7 << 13)
+/* 12 reserved */
#define SDE_CRT_HOTPLUG (1 << 11)
#define SDE_PORTD_HOTPLUG (1 << 10)
#define SDE_PORTC_HOTPLUG (1 << 9)
#define SDE_PORTB_HOTPLUG (1 << 8)
#define SDE_SDVOB_HOTPLUG (1 << 6)
#define SDE_HOTPLUG_MASK (0xf << 8)
+#define SDE_TRANSB_CRC_DONE (1 << 5)
+#define SDE_TRANSB_CRC_ERR (1 << 4)
+#define SDE_TRANSB_FIFO_UNDER (1 << 3)
+#define SDE_TRANSA_CRC_DONE (1 << 2)
+#define SDE_TRANSA_CRC_ERR (1 << 1)
+#define SDE_TRANSA_FIFO_UNDER (1 << 0)
+#define SDE_TRANS_MASK (0x3f)
/* CPT */
#define SDE_CRT_HOTPLUG_CPT (1 << 19)
#define SDE_PORTD_HOTPLUG_CPT (1 << 23)
@@ -3174,10 +3253,11 @@
#define EDP_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22)
#define EDP_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22)
/* SNB B-stepping */
-#define EDP_LINK_TRAIN_400MV_0DB_SNB_B (0x0<<22)
-#define EDP_LINK_TRAIN_400MV_6DB_SNB_B (0x3a<<22)
-#define EDP_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22)
-#define EDP_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22)
+#define EDP_LINK_TRAIN_400_600MV_0DB_SNB_B (0x0<<22)
+#define EDP_LINK_TRAIN_400MV_3_5DB_SNB_B (0x1<<22)
+#define EDP_LINK_TRAIN_400_600MV_6DB_SNB_B (0x3a<<22)
+#define EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B (0x39<<22)
+#define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22)
#define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22)
#define FORCEWAKE 0xA18C
@@ -3239,6 +3319,7 @@
#define GEN6_PCODE_MAILBOX 0x138124
#define GEN6_PCODE_READY (1<<31)
+#define GEN6_READ_OC_PARAMS 0xc
#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x9
#define GEN6_PCODE_DATA 0x138128
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 4107724..0521ecf2 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -740,7 +740,7 @@
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
- I915_WRITE(MCHBAR_RENDER_STANDBY,
+ I915_WRITE(RSTDBYCTL,
dev_priv->saveMCHBAR_RENDER_STANDBY);
} else {
I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
@@ -811,7 +811,7 @@
dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR);
dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR);
dev_priv->saveMCHBAR_RENDER_STANDBY =
- I915_READ(MCHBAR_RENDER_STANDBY);
+ I915_READ(RSTDBYCTL);
} else {
dev_priv->saveIER = I915_READ(IER);
dev_priv->saveIMR = I915_READ(IMR);
@@ -822,10 +822,6 @@
if (IS_GEN6(dev))
gen6_disable_rps(dev);
- /* XXX disabling the clock gating breaks suspend on gm45
- intel_disable_clock_gating(dev);
- */
-
/* Cache mode state */
dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 8df5743..17035b8 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -30,6 +30,7 @@
#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
@@ -287,8 +288,9 @@
return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
}
-static bool intel_crt_detect_ddc(struct intel_crt *crt)
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
+ struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
/* CRT should always be at 0, but check anyway */
@@ -301,8 +303,26 @@
}
if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
- DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
- return true;
+ struct edid *edid;
+ bool is_digital = false;
+
+ edid = drm_get_edid(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ /*
+ * This may be a DVI-I connector with a shared DDC
+ * link between analog and digital outputs, so we
+ * have to check the EDID input spec of the attached device.
+ */
+ if (edid != NULL) {
+ is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+ connector->display_info.raw_edid = NULL;
+ kfree(edid);
+ }
+
+ if (!is_digital) {
+ DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+ return true;
+ }
}
return false;
@@ -458,7 +478,7 @@
}
}
- if (intel_crt_detect_ddc(crt))
+ if (intel_crt_detect_ddc(connector))
return connector_status_connected;
if (!force)
@@ -472,7 +492,7 @@
crtc = intel_get_load_detect_pipe(&crt->base, connector,
NULL, &dpms_mode);
if (crtc) {
- if (intel_crt_detect_ddc(crt))
+ if (intel_crt_detect_ddc(connector))
status = connector_status_connected;
else
status = intel_crt_load_detect(crtc, crt);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0abe79f..25d9688 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3418,15 +3418,16 @@
static bool ironlake_compute_wm0(struct drm_device *dev,
int pipe,
const struct intel_watermark_params *display,
- int display_latency,
+ int display_latency_ns,
const struct intel_watermark_params *cursor,
- int cursor_latency,
+ int cursor_latency_ns,
int *plane_wm,
int *cursor_wm)
{
struct drm_crtc *crtc;
- int htotal, hdisplay, clock, pixel_size = 0;
- int line_time_us, line_count, entries;
+ int htotal, hdisplay, clock, pixel_size;
+ int line_time_us, line_count;
+ int entries, tlb_miss;
crtc = intel_get_crtc_for_pipe(dev, pipe);
if (crtc->fb == NULL || !crtc->enabled)
@@ -3438,7 +3439,10 @@
pixel_size = crtc->fb->bits_per_pixel / 8;
/* Use the small buffer method to calculate plane watermark */
- entries = ((clock * pixel_size / 1000) * display_latency * 100) / 1000;
+ entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
+ tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
+ if (tlb_miss > 0)
+ entries += tlb_miss;
entries = DIV_ROUND_UP(entries, display->cacheline_size);
*plane_wm = entries + display->guard_size;
if (*plane_wm > (int)display->max_wm)
@@ -3446,8 +3450,11 @@
/* Use the large buffer method to calculate cursor watermark */
line_time_us = ((htotal * 1000) / clock);
- line_count = (cursor_latency * 100 / line_time_us + 1000) / 1000;
+ line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
entries = line_count * 64 * pixel_size;
+ tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
+ if (tlb_miss > 0)
+ entries += tlb_miss;
entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
*cursor_wm = entries + cursor->guard_size;
if (*cursor_wm > (int)cursor->max_wm)
@@ -3456,14 +3463,109 @@
return true;
}
+/*
+ * Check the wm result.
+ *
+ * If any calculated watermark values is larger than the maximum value that
+ * can be programmed into the associated watermark register, that watermark
+ * must be disabled.
+ */
+static bool ironlake_check_srwm(struct drm_device *dev, int level,
+ int fbc_wm, int display_wm, int cursor_wm,
+ const struct intel_watermark_params *display,
+ const struct intel_watermark_params *cursor)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
+ " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
+
+ if (fbc_wm > SNB_FBC_MAX_SRWM) {
+ DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
+ fbc_wm, SNB_FBC_MAX_SRWM, level);
+
+ /* fbc has it's own way to disable FBC WM */
+ I915_WRITE(DISP_ARB_CTL,
+ I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
+ return false;
+ }
+
+ if (display_wm > display->max_wm) {
+ DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
+ display_wm, SNB_DISPLAY_MAX_SRWM, level);
+ return false;
+ }
+
+ if (cursor_wm > cursor->max_wm) {
+ DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
+ cursor_wm, SNB_CURSOR_MAX_SRWM, level);
+ return false;
+ }
+
+ if (!(fbc_wm || display_wm || cursor_wm)) {
+ DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * Compute watermark values of WM[1-3],
+ */
+static bool ironlake_compute_srwm(struct drm_device *dev, int level,
+ int hdisplay, int htotal,
+ int pixel_size, int clock, int latency_ns,
+ const struct intel_watermark_params *display,
+ const struct intel_watermark_params *cursor,
+ int *fbc_wm, int *display_wm, int *cursor_wm)
+{
+
+ unsigned long line_time_us;
+ int line_count, line_size;
+ int small, large;
+ int entries;
+
+ if (!latency_ns) {
+ *fbc_wm = *display_wm = *cursor_wm = 0;
+ return false;
+ }
+
+ line_time_us = (htotal * 1000) / clock;
+ line_count = (latency_ns / line_time_us + 1000) / 1000;
+ line_size = hdisplay * pixel_size;
+
+ /* Use the minimum of the small and large buffer method for primary */
+ small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+ large = line_count * line_size;
+
+ entries = DIV_ROUND_UP(min(small, large), display->cacheline_size);
+ *display_wm = entries + display->guard_size;
+
+ /*
+ * Spec says:
+ * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
+ */
+ *fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
+
+ /* calculate the self-refresh watermark for display cursor */
+ entries = line_count * pixel_size * 64;
+ entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
+ *cursor_wm = entries + cursor->guard_size;
+
+ return ironlake_check_srwm(dev, level,
+ *fbc_wm, *display_wm, *cursor_wm,
+ display, cursor);
+}
+
static void ironlake_update_wm(struct drm_device *dev,
int planea_clock, int planeb_clock,
- int sr_hdisplay, int sr_htotal,
+ int hdisplay, int htotal,
int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int plane_wm, cursor_wm, enabled;
- int tmp;
+ int fbc_wm, plane_wm, cursor_wm, enabled;
+ int clock;
enabled = 0;
if (ironlake_compute_wm0(dev, 0,
@@ -3498,152 +3600,49 @@
* Calculate and update the self-refresh watermark only when one
* display plane is used.
*/
- tmp = 0;
- if (enabled == 1) {
- unsigned long line_time_us;
- int small, large, plane_fbc;
- int sr_clock, entries;
- int line_count, line_size;
- /* Read the self-refresh latency. The unit is 0.5us */
- int ilk_sr_latency = I915_READ(MLTR_ILK) & ILK_SRLT_MASK;
+ I915_WRITE(WM3_LP_ILK, 0);
+ I915_WRITE(WM2_LP_ILK, 0);
+ I915_WRITE(WM1_LP_ILK, 0);
- sr_clock = planea_clock ? planea_clock : planeb_clock;
- line_time_us = (sr_htotal * 1000) / sr_clock;
+ if (enabled != 1)
+ return;
- /* Use ns/us then divide to preserve precision */
- line_count = ((ilk_sr_latency * 500) / line_time_us + 1000)
- / 1000;
- line_size = sr_hdisplay * pixel_size;
+ clock = planea_clock ? planea_clock : planeb_clock;
- /* Use the minimum of the small and large buffer method for primary */
- small = ((sr_clock * pixel_size / 1000) * (ilk_sr_latency * 500)) / 1000;
- large = line_count * line_size;
+ /* WM1 */
+ if (!ironlake_compute_srwm(dev, 1, hdisplay, htotal, pixel_size,
+ clock, ILK_READ_WM1_LATENCY() * 500,
+ &ironlake_display_srwm_info,
+ &ironlake_cursor_srwm_info,
+ &fbc_wm, &plane_wm, &cursor_wm))
+ return;
- entries = DIV_ROUND_UP(min(small, large),
- ironlake_display_srwm_info.cacheline_size);
+ I915_WRITE(WM1_LP_ILK,
+ WM1_LP_SR_EN |
+ (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (fbc_wm << WM1_LP_FBC_SHIFT) |
+ (plane_wm << WM1_LP_SR_SHIFT) |
+ cursor_wm);
- plane_fbc = entries * 64;
- plane_fbc = DIV_ROUND_UP(plane_fbc, line_size);
+ /* WM2 */
+ if (!ironlake_compute_srwm(dev, 2, hdisplay, htotal, pixel_size,
+ clock, ILK_READ_WM2_LATENCY() * 500,
+ &ironlake_display_srwm_info,
+ &ironlake_cursor_srwm_info,
+ &fbc_wm, &plane_wm, &cursor_wm))
+ return;
- plane_wm = entries + ironlake_display_srwm_info.guard_size;
- if (plane_wm > (int)ironlake_display_srwm_info.max_wm)
- plane_wm = ironlake_display_srwm_info.max_wm;
-
- /* calculate the self-refresh watermark for display cursor */
- entries = line_count * pixel_size * 64;
- entries = DIV_ROUND_UP(entries,
- ironlake_cursor_srwm_info.cacheline_size);
-
- cursor_wm = entries + ironlake_cursor_srwm_info.guard_size;
- if (cursor_wm > (int)ironlake_cursor_srwm_info.max_wm)
- cursor_wm = ironlake_cursor_srwm_info.max_wm;
-
- /* configure watermark and enable self-refresh */
- tmp = (WM1_LP_SR_EN |
- (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
- (plane_fbc << WM1_LP_FBC_SHIFT) |
- (plane_wm << WM1_LP_SR_SHIFT) |
- cursor_wm);
- DRM_DEBUG_KMS("self-refresh watermark: display plane %d, fbc lines %d,"
- " cursor %d\n", plane_wm, plane_fbc, cursor_wm);
- }
- I915_WRITE(WM1_LP_ILK, tmp);
- /* XXX setup WM2 and WM3 */
-}
-
-/*
- * Check the wm result.
- *
- * If any calculated watermark values is larger than the maximum value that
- * can be programmed into the associated watermark register, that watermark
- * must be disabled.
- *
- * Also return true if all of those watermark values is 0, which is set by
- * sandybridge_compute_srwm, to indicate the latency is ZERO.
- */
-static bool sandybridge_check_srwm(struct drm_device *dev, int level,
- int fbc_wm, int display_wm, int cursor_wm)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
- " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
-
- if (fbc_wm > SNB_FBC_MAX_SRWM) {
- DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
- fbc_wm, SNB_FBC_MAX_SRWM, level);
-
- /* fbc has it's own way to disable FBC WM */
- I915_WRITE(DISP_ARB_CTL,
- I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
- return false;
- }
-
- if (display_wm > SNB_DISPLAY_MAX_SRWM) {
- DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
- display_wm, SNB_DISPLAY_MAX_SRWM, level);
- return false;
- }
-
- if (cursor_wm > SNB_CURSOR_MAX_SRWM) {
- DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
- cursor_wm, SNB_CURSOR_MAX_SRWM, level);
- return false;
- }
-
- if (!(fbc_wm || display_wm || cursor_wm)) {
- DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
- return false;
- }
-
- return true;
-}
-
-/*
- * Compute watermark values of WM[1-3],
- */
-static bool sandybridge_compute_srwm(struct drm_device *dev, int level,
- int hdisplay, int htotal, int pixel_size,
- int clock, int latency_ns, int *fbc_wm,
- int *display_wm, int *cursor_wm)
-{
-
- unsigned long line_time_us;
- int small, large;
- int entries;
- int line_count, line_size;
-
- if (!latency_ns) {
- *fbc_wm = *display_wm = *cursor_wm = 0;
- return false;
- }
-
- line_time_us = (htotal * 1000) / clock;
- line_count = (latency_ns / line_time_us + 1000) / 1000;
- line_size = hdisplay * pixel_size;
-
- /* Use the minimum of the small and large buffer method for primary */
- small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
- large = line_count * line_size;
-
- entries = DIV_ROUND_UP(min(small, large),
- sandybridge_display_srwm_info.cacheline_size);
- *display_wm = entries + sandybridge_display_srwm_info.guard_size;
+ I915_WRITE(WM2_LP_ILK,
+ WM2_LP_EN |
+ (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+ (fbc_wm << WM1_LP_FBC_SHIFT) |
+ (plane_wm << WM1_LP_SR_SHIFT) |
+ cursor_wm);
/*
- * Spec said:
- * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
+ * WM3 is unsupported on ILK, probably because we don't have latency
+ * data for that power state
*/
- *fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2;
-
- /* calculate the self-refresh watermark for display cursor */
- entries = line_count * pixel_size * 64;
- entries = DIV_ROUND_UP(entries,
- sandybridge_cursor_srwm_info.cacheline_size);
- *cursor_wm = entries + sandybridge_cursor_srwm_info.guard_size;
-
- return sandybridge_check_srwm(dev, level,
- *fbc_wm, *display_wm, *cursor_wm);
}
static void sandybridge_update_wm(struct drm_device *dev,
@@ -3652,7 +3651,7 @@
int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int latency = SNB_READ_WM0_LATENCY();
+ int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
int fbc_wm, plane_wm, cursor_wm, enabled;
int clock;
@@ -3701,9 +3700,11 @@
clock = planea_clock ? planea_clock : planeb_clock;
/* WM1 */
- if (!sandybridge_compute_srwm(dev, 1, hdisplay, htotal, pixel_size,
- clock, SNB_READ_WM1_LATENCY() * 500,
- &fbc_wm, &plane_wm, &cursor_wm))
+ if (!ironlake_compute_srwm(dev, 1, hdisplay, htotal, pixel_size,
+ clock, SNB_READ_WM1_LATENCY() * 500,
+ &sandybridge_display_srwm_info,
+ &sandybridge_cursor_srwm_info,
+ &fbc_wm, &plane_wm, &cursor_wm))
return;
I915_WRITE(WM1_LP_ILK,
@@ -3714,10 +3715,12 @@
cursor_wm);
/* WM2 */
- if (!sandybridge_compute_srwm(dev, 2,
- hdisplay, htotal, pixel_size,
- clock, SNB_READ_WM2_LATENCY() * 500,
- &fbc_wm, &plane_wm, &cursor_wm))
+ if (!ironlake_compute_srwm(dev, 2,
+ hdisplay, htotal, pixel_size,
+ clock, SNB_READ_WM2_LATENCY() * 500,
+ &sandybridge_display_srwm_info,
+ &sandybridge_cursor_srwm_info,
+ &fbc_wm, &plane_wm, &cursor_wm))
return;
I915_WRITE(WM2_LP_ILK,
@@ -3728,10 +3731,12 @@
cursor_wm);
/* WM3 */
- if (!sandybridge_compute_srwm(dev, 3,
- hdisplay, htotal, pixel_size,
- clock, SNB_READ_WM3_LATENCY() * 500,
- &fbc_wm, &plane_wm, &cursor_wm))
+ if (!ironlake_compute_srwm(dev, 3,
+ hdisplay, htotal, pixel_size,
+ clock, SNB_READ_WM3_LATENCY() * 500,
+ &sandybridge_display_srwm_info,
+ &sandybridge_cursor_srwm_info,
+ &fbc_wm, &plane_wm, &cursor_wm))
return;
I915_WRITE(WM3_LP_ILK,
@@ -3951,7 +3956,7 @@
int lane = 0, link_bw, bpp;
/* CPU eDP doesn't require FDI link, so just set DP M/N
according to current link config */
- if (has_edp_encoder && !intel_encoder_is_pch_edp(&encoder->base)) {
+ if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
target_clock = mode->clock;
intel_edp_link_config(has_edp_encoder,
&lane, &link_bw);
@@ -5038,8 +5043,8 @@
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- int dpll = I915_READ(dpll_reg);
+ int dpll_reg = DPLL(pipe);
+ int dpll;
if (HAS_PCH_SPLIT(dev))
return;
@@ -5047,17 +5052,19 @@
if (!dev_priv->lvds_downclock_avail)
return;
+ dpll = I915_READ(dpll_reg);
if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
DRM_DEBUG_DRIVER("upclocking LVDS\n");
/* Unlock panel regs */
- I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
- PANEL_UNLOCK_REGS);
+ I915_WRITE(PP_CONTROL,
+ I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
dpll &= ~DISPLAY_RATE_SELECT_FPA1;
I915_WRITE(dpll_reg, dpll);
- dpll = I915_READ(dpll_reg);
+ POSTING_READ(dpll_reg);
intel_wait_for_vblank(dev, pipe);
+
dpll = I915_READ(dpll_reg);
if (dpll & DISPLAY_RATE_SELECT_FPA1)
DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
@@ -5802,6 +5809,8 @@
encoder->base.possible_clones =
intel_encoder_clones(dev, encoder->clone_mask);
}
+
+ intel_panel_setup_backlight(dev);
}
static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
@@ -6145,6 +6154,10 @@
void gen6_enable_rps(struct drm_i915_private *dev_priv)
{
+ u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+ u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+ u32 pcu_mbox;
+ int cur_freq, min_freq, max_freq;
int i;
/* Here begins a magic sequence of register writes to enable
@@ -6216,6 +6229,29 @@
500))
DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
+ min_freq = (rp_state_cap & 0xff0000) >> 16;
+ max_freq = rp_state_cap & 0xff;
+ cur_freq = (gt_perf_status & 0xff00) >> 8;
+
+ /* Check for overclock support */
+ if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+ 500))
+ DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
+ I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
+ pcu_mbox = I915_READ(GEN6_PCODE_DATA);
+ if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+ 500))
+ DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
+ if (pcu_mbox & (1<<31)) { /* OC supported */
+ max_freq = pcu_mbox & 0xff;
+ DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 100);
+ }
+
+ /* In units of 100MHz */
+ dev_priv->max_delay = max_freq;
+ dev_priv->min_delay = min_freq;
+ dev_priv->cur_delay = cur_freq;
+
/* requires MSI enabled */
I915_WRITE(GEN6_PMIER,
GEN6_PM_MBOX_EVENT |
@@ -6386,42 +6422,6 @@
} else if (IS_I830(dev)) {
I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
}
-
- /*
- * GPU can automatically power down the render unit if given a page
- * to save state.
- */
- if (IS_IRONLAKE_M(dev) && 0) { /* XXX causes a failure during suspend */
- if (dev_priv->renderctx == NULL)
- dev_priv->renderctx = intel_alloc_context_page(dev);
- if (dev_priv->renderctx) {
- struct drm_i915_gem_object *obj = dev_priv->renderctx;
- if (BEGIN_LP_RING(4) == 0) {
- OUT_RING(MI_SET_CONTEXT);
- OUT_RING(obj->gtt_offset |
- MI_MM_SPACE_GTT |
- MI_SAVE_EXT_STATE_EN |
- MI_RESTORE_EXT_STATE_EN |
- MI_RESTORE_INHIBIT);
- OUT_RING(MI_NOOP);
- OUT_RING(MI_FLUSH);
- ADVANCE_LP_RING();
- }
- } else
- DRM_DEBUG_KMS("Failed to allocate render context."
- "Disable RC6\n");
- }
-
- if (IS_GEN4(dev) && IS_MOBILE(dev)) {
- if (dev_priv->pwrctx == NULL)
- dev_priv->pwrctx = intel_alloc_context_page(dev);
- if (dev_priv->pwrctx) {
- struct drm_i915_gem_object *obj = dev_priv->pwrctx;
- I915_WRITE(PWRCTXA, obj->gtt_offset | PWRCTX_EN);
- I915_WRITE(MCHBAR_RENDER_STANDBY,
- I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
- }
- }
}
void intel_disable_clock_gating(struct drm_device *dev)
@@ -6451,6 +6451,57 @@
}
}
+static void ironlake_disable_rc6(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
+ I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
+ wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
+ 10);
+ POSTING_READ(CCID);
+ I915_WRITE(PWRCTXA, 0);
+ POSTING_READ(PWRCTXA);
+ I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+ POSTING_READ(RSTDBYCTL);
+ i915_gem_object_unpin(dev_priv->renderctx);
+ drm_gem_object_unreference(&dev_priv->renderctx->base);
+ dev_priv->renderctx = NULL;
+ i915_gem_object_unpin(dev_priv->pwrctx);
+ drm_gem_object_unreference(&dev_priv->pwrctx->base);
+ dev_priv->pwrctx = NULL;
+}
+
+void ironlake_enable_rc6(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
+
+ /*
+ * GPU can automatically power down the render unit if given a page
+ * to save state.
+ */
+ ret = BEGIN_LP_RING(6);
+ if (ret) {
+ ironlake_disable_rc6(dev);
+ return;
+ }
+ OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
+ OUT_RING(MI_SET_CONTEXT);
+ OUT_RING(dev_priv->renderctx->gtt_offset |
+ MI_MM_SPACE_GTT |
+ MI_SAVE_EXT_STATE_EN |
+ MI_RESTORE_EXT_STATE_EN |
+ MI_RESTORE_INHIBIT);
+ OUT_RING(MI_SUSPEND_FLUSH);
+ OUT_RING(MI_NOOP);
+ OUT_RING(MI_FLUSH);
+ ADVANCE_LP_RING();
+
+ I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
+ I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+}
+
/* Set up chip specific display functions */
static void intel_init_display(struct drm_device *dev)
{
@@ -6665,12 +6716,7 @@
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
}
-
- /* set memory base */
- if (IS_GEN2(dev))
- dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
- else
- dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
+ dev->mode_config.fb_base = dev->agp->base;
if (IS_MOBILE(dev) || !IS_GEN2(dev))
dev_priv->num_pipe = 2;
@@ -6698,6 +6744,21 @@
if (IS_GEN6(dev))
gen6_enable_rps(dev_priv);
+ if (IS_IRONLAKE_M(dev)) {
+ dev_priv->renderctx = intel_alloc_context_page(dev);
+ if (!dev_priv->renderctx)
+ goto skip_rc6;
+ dev_priv->pwrctx = intel_alloc_context_page(dev);
+ if (!dev_priv->pwrctx) {
+ i915_gem_object_unpin(dev_priv->renderctx);
+ drm_gem_object_unreference(&dev_priv->renderctx->base);
+ dev_priv->renderctx = NULL;
+ goto skip_rc6;
+ }
+ ironlake_enable_rc6(dev);
+ }
+
+skip_rc6:
INIT_WORK(&dev_priv->idle_work, intel_idle_update);
setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
(unsigned long)dev);
@@ -6734,7 +6795,8 @@
if (IS_GEN6(dev))
gen6_disable_rps(dev);
- intel_disable_clock_gating(dev);
+ if (IS_IRONLAKE_M(dev))
+ ironlake_disable_rc6(dev);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1dc6040..1f4242b 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1153,18 +1153,27 @@
static uint32_t
intel_gen6_edp_signal_levels(uint8_t train_set)
{
- switch (train_set & (DP_TRAIN_VOLTAGE_SWING_MASK|DP_TRAIN_PRE_EMPHASIS_MASK)) {
+ int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+ DP_TRAIN_PRE_EMPHASIS_MASK);
+ switch (signal_levels) {
case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
- return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+ case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+ return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
- return EDP_LINK_TRAIN_400MV_6DB_SNB_B;
+ case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
+ return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
- return EDP_LINK_TRAIN_600MV_3_5DB_SNB_B;
+ case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
- return EDP_LINK_TRAIN_800MV_0DB_SNB_B;
+ case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0:
+ return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
default:
- DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level\n");
- return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+ DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+ "0x%x\n", signal_levels);
+ return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
}
}
@@ -1334,17 +1343,24 @@
struct drm_device *dev = intel_dp->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
bool channel_eq = false;
- int tries;
+ int tries, cr_tries;
u32 reg;
uint32_t DP = intel_dp->DP;
/* channel equalization */
tries = 0;
+ cr_tries = 0;
channel_eq = false;
for (;;) {
/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
uint32_t signal_levels;
+ if (cr_tries > 5) {
+ DRM_ERROR("failed to train DP, aborting\n");
+ intel_dp_link_down(intel_dp);
+ break;
+ }
+
if (IS_GEN6(dev) && is_edp(intel_dp)) {
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
@@ -1367,14 +1383,26 @@
if (!intel_dp_get_link_status(intel_dp))
break;
+ /* Make sure clock is still ok */
+ if (!intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+ intel_dp_start_link_train(intel_dp);
+ cr_tries++;
+ continue;
+ }
+
if (intel_channel_eq_ok(intel_dp)) {
channel_eq = true;
break;
}
- /* Try 5 times */
- if (tries > 5)
- break;
+ /* Try 5 times, then try clock recovery if that fails */
+ if (tries > 5) {
+ intel_dp_link_down(intel_dp);
+ intel_dp_start_link_train(intel_dp);
+ tries = 0;
+ cr_tries++;
+ continue;
+ }
/* Compute new intel_dp->train_set as requested by target */
intel_get_adjust_train(intel_dp);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d782ad9..74db255 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -257,6 +257,9 @@
extern u32 intel_panel_get_max_backlight(struct drm_device *dev);
extern u32 intel_panel_get_backlight(struct drm_device *dev);
extern void intel_panel_set_backlight(struct drm_device *dev, u32 level);
+extern void intel_panel_setup_backlight(struct drm_device *dev);
+extern void intel_panel_enable_backlight(struct drm_device *dev);
+extern void intel_panel_disable_backlight(struct drm_device *dev);
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 701e830..ee145a2 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -62,6 +62,7 @@
struct drm_fb_helper_surface_size *sizes)
{
struct drm_device *dev = ifbdev->helper.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct fb_info *info;
struct drm_framebuffer *fb;
struct drm_mode_fb_cmd mode_cmd;
@@ -77,7 +78,7 @@
mode_cmd.height = sizes->surface_height;
mode_cmd.bpp = sizes->surface_bpp;
- mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 1) / 8), 64);
+ mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 7) / 8), 64);
mode_cmd.depth = sizes->surface_depth;
size = mode_cmd.pitch * mode_cmd.height;
@@ -120,6 +121,11 @@
info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &intelfb_ops;
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (ret) {
+ ret = -ENOMEM;
+ goto out_unpin;
+ }
/* setup aperture base/size for vesafb takeover */
info->apertures = alloc_apertures(1);
if (!info->apertures) {
@@ -127,10 +133,8 @@
goto out_unpin;
}
info->apertures->ranges[0].base = dev->mode_config.fb_base;
- if (!IS_GEN2(dev))
- info->apertures->ranges[0].size = pci_resource_len(dev->pdev, 2);
- else
- info->apertures->ranges[0].size = pci_resource_len(dev->pdev, 0);
+ info->apertures->ranges[0].size =
+ dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
info->fix.smem_start = dev->mode_config.fb_base + obj->gtt_offset;
info->fix.smem_len = size;
@@ -140,12 +144,6 @@
ret = -ENOSPC;
goto out_unpin;
}
-
- ret = fb_alloc_cmap(&info->cmap, 256, 0);
- if (ret) {
- ret = -ENOMEM;
- goto out_unpin;
- }
info->screen_size = size;
// memset(info->screen_base, 0, size);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index aa230708..8f4f6bd 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -106,7 +106,7 @@
I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
POSTING_READ(lvds_reg);
- intel_panel_set_backlight(dev, dev_priv->backlight_level);
+ intel_panel_enable_backlight(dev);
}
static void intel_lvds_disable(struct intel_lvds *intel_lvds)
@@ -123,8 +123,7 @@
lvds_reg = LVDS;
}
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
- intel_panel_set_backlight(dev, 0);
+ intel_panel_disable_backlight(dev);
I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
@@ -375,6 +374,10 @@
}
out:
+ if ((pfit_control & PFIT_ENABLE) == 0) {
+ pfit_control = 0;
+ pfit_pgm_ratios = 0;
+ }
if (pfit_control != intel_lvds->pfit_control ||
pfit_pgm_ratios != intel_lvds->pfit_pgm_ratios) {
intel_lvds->pfit_control = pfit_control;
@@ -398,8 +401,6 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
-
/* We try to do the minimum that is necessary in order to unlock
* the registers for mode setting.
*
@@ -430,9 +431,6 @@
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
- if (dev_priv->backlight_level == 0)
- dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
-
/* Undo any unlocking done in prepare to prevent accidental
* adjustment of the registers.
*/
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 7350ec2..e00d200 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -250,3 +250,34 @@
tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(BLC_PWM_CTL, tmp | level);
}
+
+void intel_panel_disable_backlight(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->backlight_enabled) {
+ dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ dev_priv->backlight_enabled = false;
+ }
+
+ intel_panel_set_backlight(dev, 0);
+}
+
+void intel_panel_enable_backlight(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->backlight_level == 0)
+ dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
+
+ intel_panel_set_backlight(dev, dev_priv->backlight_level);
+ dev_priv->backlight_enabled = true;
+}
+
+void intel_panel_setup_backlight(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
+ dev_priv->backlight_enabled = dev_priv->backlight_level != 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 56bc95c..03e3370 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -48,7 +48,7 @@
return seqno;
}
-static void
+static int
render_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate_domains,
u32 flush_domains)
@@ -56,6 +56,7 @@
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
u32 cmd;
+ int ret;
#if WATCH_EXEC
DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
@@ -116,12 +117,16 @@
#if WATCH_EXEC
DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd);
#endif
- if (intel_ring_begin(ring, 2) == 0) {
- intel_ring_emit(ring, cmd);
- intel_ring_emit(ring, MI_NOOP);
- intel_ring_advance(ring);
- }
+ ret = intel_ring_begin(ring, 2);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(ring, cmd);
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_advance(ring);
}
+
+ return 0;
}
static void ring_write_tail(struct intel_ring_buffer *ring,
@@ -480,26 +485,56 @@
return pc->cpu_page[0];
}
+static void
+ironlake_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+ dev_priv->gt_irq_mask &= ~mask;
+ I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+ POSTING_READ(GTIMR);
+}
+
+static void
+ironlake_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+ dev_priv->gt_irq_mask |= mask;
+ I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+ POSTING_READ(GTIMR);
+}
+
+static void
+i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+ dev_priv->irq_mask &= ~mask;
+ I915_WRITE(IMR, dev_priv->irq_mask);
+ POSTING_READ(IMR);
+}
+
+static void
+i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
+{
+ dev_priv->irq_mask |= mask;
+ I915_WRITE(IMR, dev_priv->irq_mask);
+ POSTING_READ(IMR);
+}
+
static bool
render_ring_get_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev->irq_enabled)
return false;
- if (atomic_inc_return(&ring->irq_refcount) == 1) {
- drm_i915_private_t *dev_priv = dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock(&ring->irq_lock);
+ if (ring->irq_refcount++ == 0) {
if (HAS_PCH_SPLIT(dev))
- ironlake_enable_graphics_irq(dev_priv,
- GT_PIPE_NOTIFY | GT_USER_INTERRUPT);
+ ironlake_enable_irq(dev_priv,
+ GT_PIPE_NOTIFY | GT_USER_INTERRUPT);
else
i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
+ spin_unlock(&ring->irq_lock);
return true;
}
@@ -508,20 +543,18 @@
render_ring_put_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
- if (atomic_dec_and_test(&ring->irq_refcount)) {
- drm_i915_private_t *dev_priv = dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+ spin_lock(&ring->irq_lock);
+ if (--ring->irq_refcount == 0) {
if (HAS_PCH_SPLIT(dev))
- ironlake_disable_graphics_irq(dev_priv,
- GT_USER_INTERRUPT |
- GT_PIPE_NOTIFY);
+ ironlake_disable_irq(dev_priv,
+ GT_USER_INTERRUPT |
+ GT_PIPE_NOTIFY);
else
i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
+ spin_unlock(&ring->irq_lock);
}
void intel_ring_setup_status_page(struct intel_ring_buffer *ring)
@@ -534,19 +567,24 @@
POSTING_READ(mmio);
}
-static void
+static int
bsd_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate_domains,
u32 flush_domains)
{
- if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
- return;
+ int ret;
- if (intel_ring_begin(ring, 2) == 0) {
- intel_ring_emit(ring, MI_FLUSH);
- intel_ring_emit(ring, MI_NOOP);
- intel_ring_advance(ring);
- }
+ if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
+ return 0;
+
+ ret = intel_ring_begin(ring, 2);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(ring, MI_FLUSH);
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_advance(ring);
+ return 0;
}
static int
@@ -577,18 +615,15 @@
ring_get_irq(struct intel_ring_buffer *ring, u32 flag)
{
struct drm_device *dev = ring->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
if (!dev->irq_enabled)
return false;
- if (atomic_inc_return(&ring->irq_refcount) == 1) {
- drm_i915_private_t *dev_priv = dev->dev_private;
- unsigned long irqflags;
-
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
- ironlake_enable_graphics_irq(dev_priv, flag);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
- }
+ spin_lock(&ring->irq_lock);
+ if (ring->irq_refcount++ == 0)
+ ironlake_enable_irq(dev_priv, flag);
+ spin_unlock(&ring->irq_lock);
return true;
}
@@ -597,15 +632,47 @@
ring_put_irq(struct intel_ring_buffer *ring, u32 flag)
{
struct drm_device *dev = ring->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
- if (atomic_dec_and_test(&ring->irq_refcount)) {
- drm_i915_private_t *dev_priv = dev->dev_private;
- unsigned long irqflags;
+ spin_lock(&ring->irq_lock);
+ if (--ring->irq_refcount == 0)
+ ironlake_disable_irq(dev_priv, flag);
+ spin_unlock(&ring->irq_lock);
+}
- spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
- ironlake_disable_graphics_irq(dev_priv, flag);
- spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+static bool
+gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+{
+ struct drm_device *dev = ring->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ if (!dev->irq_enabled)
+ return false;
+
+ spin_lock(&ring->irq_lock);
+ if (ring->irq_refcount++ == 0) {
+ ring->irq_mask &= ~rflag;
+ I915_WRITE_IMR(ring, ring->irq_mask);
+ ironlake_enable_irq(dev_priv, gflag);
}
+ spin_unlock(&ring->irq_lock);
+
+ return true;
+}
+
+static void
+gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
+{
+ struct drm_device *dev = ring->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+
+ spin_lock(&ring->irq_lock);
+ if (--ring->irq_refcount == 0) {
+ ring->irq_mask |= rflag;
+ I915_WRITE_IMR(ring, ring->irq_mask);
+ ironlake_disable_irq(dev_priv, gflag);
+ }
+ spin_unlock(&ring->irq_lock);
}
static bool
@@ -748,6 +815,9 @@
INIT_LIST_HEAD(&ring->request_list);
INIT_LIST_HEAD(&ring->gpu_write_list);
+ spin_lock_init(&ring->irq_lock);
+ ring->irq_mask = ~0;
+
if (I915_NEED_GFX_HWS(dev)) {
ret = init_status_page(ring);
if (ret)
@@ -785,6 +855,14 @@
if (ret)
goto err_unmap;
+ /* Workaround an erratum on the i830 which causes a hang if
+ * the TAIL pointer points to within the last 2 cachelines
+ * of the buffer.
+ */
+ ring->effective_size = ring->size;
+ if (IS_I830(ring->dev))
+ ring->effective_size -= 128;
+
return 0;
err_unmap:
@@ -827,8 +905,7 @@
static int intel_wrap_ring_buffer(struct intel_ring_buffer *ring)
{
unsigned int *virt;
- int rem;
- rem = ring->size - ring->tail;
+ int rem = ring->size - ring->tail;
if (ring->space < rem) {
int ret = intel_wait_ring_buffer(ring, rem);
@@ -895,7 +972,7 @@
int n = 4*num_dwords;
int ret;
- if (unlikely(ring->tail + n > ring->size)) {
+ if (unlikely(ring->tail + n > ring->effective_size)) {
ret = intel_wrap_ring_buffer(ring);
if (unlikely(ret))
return ret;
@@ -973,20 +1050,25 @@
GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE);
}
-static void gen6_ring_flush(struct intel_ring_buffer *ring,
- u32 invalidate_domains,
- u32 flush_domains)
+static int gen6_ring_flush(struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains)
{
- if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
- return;
+ int ret;
- if (intel_ring_begin(ring, 4) == 0) {
- intel_ring_emit(ring, MI_FLUSH_DW);
- intel_ring_emit(ring, 0);
- intel_ring_emit(ring, 0);
- intel_ring_emit(ring, 0);
- intel_ring_advance(ring);
- }
+ if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
+ return 0;
+
+ ret = intel_ring_begin(ring, 4);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(ring, MI_FLUSH_DW);
+ intel_ring_emit(ring, 0);
+ intel_ring_emit(ring, 0);
+ intel_ring_emit(ring, 0);
+ intel_ring_advance(ring);
+ return 0;
}
static int
@@ -1008,15 +1090,35 @@
}
static bool
+gen6_render_ring_get_irq(struct intel_ring_buffer *ring)
+{
+ return gen6_ring_get_irq(ring,
+ GT_USER_INTERRUPT,
+ GEN6_RENDER_USER_INTERRUPT);
+}
+
+static void
+gen6_render_ring_put_irq(struct intel_ring_buffer *ring)
+{
+ return gen6_ring_put_irq(ring,
+ GT_USER_INTERRUPT,
+ GEN6_RENDER_USER_INTERRUPT);
+}
+
+static bool
gen6_bsd_ring_get_irq(struct intel_ring_buffer *ring)
{
- return ring_get_irq(ring, GT_GEN6_BSD_USER_INTERRUPT);
+ return gen6_ring_get_irq(ring,
+ GT_GEN6_BSD_USER_INTERRUPT,
+ GEN6_BSD_USER_INTERRUPT);
}
static void
gen6_bsd_ring_put_irq(struct intel_ring_buffer *ring)
{
- ring_put_irq(ring, GT_GEN6_BSD_USER_INTERRUPT);
+ return gen6_ring_put_irq(ring,
+ GT_GEN6_BSD_USER_INTERRUPT,
+ GEN6_BSD_USER_INTERRUPT);
}
/* ring buffer for Video Codec for Gen6+ */
@@ -1040,13 +1142,17 @@
static bool
blt_ring_get_irq(struct intel_ring_buffer *ring)
{
- return ring_get_irq(ring, GT_BLT_USER_INTERRUPT);
+ return gen6_ring_get_irq(ring,
+ GT_BLT_USER_INTERRUPT,
+ GEN6_BLITTER_USER_INTERRUPT);
}
static void
blt_ring_put_irq(struct intel_ring_buffer *ring)
{
- ring_put_irq(ring, GT_BLT_USER_INTERRUPT);
+ gen6_ring_put_irq(ring,
+ GT_BLT_USER_INTERRUPT,
+ GEN6_BLITTER_USER_INTERRUPT);
}
@@ -1115,20 +1221,25 @@
return intel_ring_begin(ring, 4);
}
-static void blt_ring_flush(struct intel_ring_buffer *ring,
+static int blt_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate_domains,
u32 flush_domains)
{
- if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
- return;
+ int ret;
- if (blt_ring_begin(ring, 4) == 0) {
- intel_ring_emit(ring, MI_FLUSH_DW);
- intel_ring_emit(ring, 0);
- intel_ring_emit(ring, 0);
- intel_ring_emit(ring, 0);
- intel_ring_advance(ring);
- }
+ if ((flush_domains & I915_GEM_DOMAIN_RENDER) == 0)
+ return 0;
+
+ ret = blt_ring_begin(ring, 4);
+ if (ret)
+ return ret;
+
+ intel_ring_emit(ring, MI_FLUSH_DW);
+ intel_ring_emit(ring, 0);
+ intel_ring_emit(ring, 0);
+ intel_ring_emit(ring, 0);
+ intel_ring_advance(ring);
+ return 0;
}
static void blt_ring_cleanup(struct intel_ring_buffer *ring)
@@ -1165,6 +1276,8 @@
*ring = render_ring;
if (INTEL_INFO(dev)->gen >= 6) {
ring->add_request = gen6_add_request;
+ ring->irq_get = gen6_render_ring_get_irq;
+ ring->irq_put = gen6_render_ring_put_irq;
} else if (IS_GEN5(dev)) {
ring->add_request = pc_render_add_request;
ring->get_seqno = pc_render_get_seqno;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index 8e2e357..be9087e 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -16,21 +16,24 @@
#define I915_RING_READ(reg) i915_safe_read(dev_priv, reg)
-#define I915_READ_TAIL(ring) I915_RING_READ(RING_TAIL(ring->mmio_base))
-#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL(ring->mmio_base), val)
+#define I915_READ_TAIL(ring) I915_RING_READ(RING_TAIL((ring)->mmio_base))
+#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL((ring)->mmio_base), val)
-#define I915_READ_START(ring) I915_RING_READ(RING_START(ring->mmio_base))
-#define I915_WRITE_START(ring, val) I915_WRITE(RING_START(ring->mmio_base), val)
+#define I915_READ_START(ring) I915_RING_READ(RING_START((ring)->mmio_base))
+#define I915_WRITE_START(ring, val) I915_WRITE(RING_START((ring)->mmio_base), val)
-#define I915_READ_HEAD(ring) I915_RING_READ(RING_HEAD(ring->mmio_base))
-#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD(ring->mmio_base), val)
+#define I915_READ_HEAD(ring) I915_RING_READ(RING_HEAD((ring)->mmio_base))
+#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD((ring)->mmio_base), val)
-#define I915_READ_CTL(ring) I915_RING_READ(RING_CTL(ring->mmio_base))
-#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL(ring->mmio_base), val)
+#define I915_READ_CTL(ring) I915_RING_READ(RING_CTL((ring)->mmio_base))
+#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL((ring)->mmio_base), val)
-#define I915_READ_NOPID(ring) I915_RING_READ(RING_NOPID(ring->mmio_base))
-#define I915_READ_SYNC_0(ring) I915_RING_READ(RING_SYNC_0(ring->mmio_base))
-#define I915_READ_SYNC_1(ring) I915_RING_READ(RING_SYNC_1(ring->mmio_base))
+#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
+#define I915_READ_IMR(ring) I915_RING_READ(RING_IMR((ring)->mmio_base))
+
+#define I915_READ_NOPID(ring) I915_RING_READ(RING_NOPID((ring)->mmio_base))
+#define I915_READ_SYNC_0(ring) I915_RING_READ(RING_SYNC_0((ring)->mmio_base))
+#define I915_READ_SYNC_1(ring) I915_RING_READ(RING_SYNC_1((ring)->mmio_base))
struct intel_ring_buffer {
const char *name;
@@ -49,12 +52,15 @@
u32 tail;
int space;
int size;
+ int effective_size;
struct intel_hw_status_page status_page;
+ spinlock_t irq_lock;
+ u32 irq_refcount;
+ u32 irq_mask;
u32 irq_seqno; /* last seq seem at irq time */
u32 waiting_seqno;
u32 sync_seqno[I915_NUM_RINGS-1];
- atomic_t irq_refcount;
bool __must_check (*irq_get)(struct intel_ring_buffer *ring);
void (*irq_put)(struct intel_ring_buffer *ring);
@@ -62,9 +68,9 @@
void (*write_tail)(struct intel_ring_buffer *ring,
u32 value);
- void (*flush)(struct intel_ring_buffer *ring,
- u32 invalidate_domains,
- u32 flush_domains);
+ int __must_check (*flush)(struct intel_ring_buffer *ring,
+ u32 invalidate_domains,
+ u32 flush_domains);
int (*add_request)(struct intel_ring_buffer *ring,
u32 *seqno);
u32 (*get_seqno)(struct intel_ring_buffer *ring);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 9d0af36..45cd376 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1024,9 +1024,13 @@
if (!intel_sdvo_set_target_input(intel_sdvo))
return;
- if (intel_sdvo->has_hdmi_monitor &&
- !intel_sdvo_set_avi_infoframe(intel_sdvo))
- return;
+ if (intel_sdvo->has_hdmi_monitor) {
+ intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
+ intel_sdvo_set_colorimetry(intel_sdvo,
+ SDVO_COLORIMETRY_RGB256);
+ intel_sdvo_set_avi_infoframe(intel_sdvo);
+ } else
+ intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_DVI);
if (intel_sdvo->is_tv &&
!intel_sdvo_set_tv_format(intel_sdvo))
@@ -1398,6 +1402,9 @@
intel_sdvo->attached_output = response;
+ intel_sdvo->has_hdmi_monitor = false;
+ intel_sdvo->has_hdmi_audio = false;
+
if ((intel_sdvo_connector->output_flag & response) == 0)
ret = connector_status_disconnected;
else if (response & SDVO_TMDS_MASK)
@@ -1922,20 +1929,7 @@
static bool
intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device)
{
- int is_hdmi;
-
- if (!intel_sdvo_check_supp_encode(intel_sdvo))
- return false;
-
- if (!intel_sdvo_set_target_output(intel_sdvo,
- device == 0 ? SDVO_OUTPUT_TMDS0 : SDVO_OUTPUT_TMDS1))
- return false;
-
- is_hdmi = 0;
- if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ENCODE, &is_hdmi, 1))
- return false;
-
- return !!is_hdmi;
+ return intel_sdvo_check_supp_encode(intel_sdvo);
}
static u8
@@ -2037,12 +2031,7 @@
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
if (intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
- /* enable hdmi encoding mode if supported */
- intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
- intel_sdvo_set_colorimetry(intel_sdvo,
- SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
-
intel_sdvo->is_hdmi = true;
}
intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ff652c7..4c8bfc9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2963,6 +2963,7 @@
config XEN_NETDEV_FRONTEND
tristate "Xen network device frontend driver"
depends on XEN
+ select XEN_XENBUS_FRONTEND
default y
help
The network device frontend driver allows the kernel to
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 5b1630e..a9523fd 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -45,6 +45,7 @@
depends on PCI && X86 && XEN
select HOTPLUG
select PCI_XEN
+ select XEN_XENBUS_FRONTEND
default y
help
The PCI device frontend driver allows the kernel to import arbitrary
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 6e6180c..5a48ce9 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -29,6 +29,14 @@
firing.
If in doubt, say yes.
+config XEN_BACKEND
+ bool "Backend driver support"
+ depends on XEN_DOM0
+ default y
+ help
+ Support for backend device drivers that provide I/O services
+ to other virtual machines.
+
config XENFS
tristate "Xen filesystem"
default y
@@ -62,6 +70,9 @@
virtual environment, /sys/hypervisor will still be present,
but will have no xen contents.
+config XEN_XENBUS_FRONTEND
+ tristate
+
config XEN_PLATFORM_PCI
tristate "xen platform pci device driver"
depends on XEN_PVHVM
diff --git a/drivers/xen/xenbus/Makefile b/drivers/xen/xenbus/Makefile
index 5571f5b..8dca685 100644
--- a/drivers/xen/xenbus/Makefile
+++ b/drivers/xen/xenbus/Makefile
@@ -5,3 +5,8 @@
xenbus-objs += xenbus_comms.o
xenbus-objs += xenbus_xs.o
xenbus-objs += xenbus_probe.o
+
+xenbus-be-objs-$(CONFIG_XEN_BACKEND) += xenbus_probe_backend.o
+xenbus-objs += $(xenbus-be-objs-y)
+
+obj-$(CONFIG_XEN_XENBUS_FRONTEND) += xenbus_probe_frontend.o
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index deb9c4b..baa65e7 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -56,7 +56,6 @@
#include <xen/events.h>
#include <xen/page.h>
-#include <xen/platform_pci.h>
#include <xen/hvm.h>
#include "xenbus_comms.h"
@@ -73,15 +72,6 @@
static BLOCKING_NOTIFIER_HEAD(xenstore_chain);
-static void wait_for_devices(struct xenbus_driver *xendrv);
-
-static int xenbus_probe_frontend(const char *type, const char *name);
-
-static void xenbus_dev_shutdown(struct device *_dev);
-
-static int xenbus_dev_suspend(struct device *dev, pm_message_t state);
-static int xenbus_dev_resume(struct device *dev);
-
/* If something in array of ids matches this device, return it. */
static const struct xenbus_device_id *
match_device(const struct xenbus_device_id *arr, struct xenbus_device *dev)
@@ -102,34 +92,7 @@
return match_device(drv->ids, to_xenbus_device(_dev)) != NULL;
}
-
-static int xenbus_uevent(struct device *_dev, struct kobj_uevent_env *env)
-{
- struct xenbus_device *dev = to_xenbus_device(_dev);
-
- if (add_uevent_var(env, "MODALIAS=xen:%s", dev->devicetype))
- return -ENOMEM;
-
- return 0;
-}
-
-/* device/<type>/<id> => <type>-<id> */
-static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename)
-{
- nodename = strchr(nodename, '/');
- if (!nodename || strlen(nodename + 1) >= XEN_BUS_ID_SIZE) {
- printk(KERN_WARNING "XENBUS: bad frontend %s\n", nodename);
- return -EINVAL;
- }
-
- strlcpy(bus_id, nodename + 1, XEN_BUS_ID_SIZE);
- if (!strchr(bus_id, '/')) {
- printk(KERN_WARNING "XENBUS: bus_id %s no slash\n", bus_id);
- return -EINVAL;
- }
- *strchr(bus_id, '/') = '-';
- return 0;
-}
+EXPORT_SYMBOL_GPL(xenbus_match);
static void free_otherend_details(struct xenbus_device *dev)
@@ -149,7 +112,30 @@
}
-int read_otherend_details(struct xenbus_device *xendev,
+static int talk_to_otherend(struct xenbus_device *dev)
+{
+ struct xenbus_driver *drv = to_xenbus_driver(dev->dev.driver);
+
+ free_otherend_watch(dev);
+ free_otherend_details(dev);
+
+ return drv->read_otherend_details(dev);
+}
+
+
+
+static int watch_otherend(struct xenbus_device *dev)
+{
+ struct xen_bus_type *bus =
+ container_of(dev->dev.bus, struct xen_bus_type, bus);
+
+ return xenbus_watch_pathfmt(dev, &dev->otherend_watch,
+ bus->otherend_changed,
+ "%s/%s", dev->otherend, "state");
+}
+
+
+int xenbus_read_otherend_details(struct xenbus_device *xendev,
char *id_node, char *path_node)
{
int err = xenbus_gather(XBT_NIL, xendev->nodename,
@@ -174,39 +160,11 @@
return 0;
}
+EXPORT_SYMBOL_GPL(xenbus_read_otherend_details);
-
-static int read_backend_details(struct xenbus_device *xendev)
-{
- return read_otherend_details(xendev, "backend-id", "backend");
-}
-
-static struct device_attribute xenbus_dev_attrs[] = {
- __ATTR_NULL
-};
-
-/* Bus type for frontend drivers. */
-static struct xen_bus_type xenbus_frontend = {
- .root = "device",
- .levels = 2, /* device/type/<id> */
- .get_bus_id = frontend_bus_id,
- .probe = xenbus_probe_frontend,
- .bus = {
- .name = "xen",
- .match = xenbus_match,
- .uevent = xenbus_uevent,
- .probe = xenbus_dev_probe,
- .remove = xenbus_dev_remove,
- .shutdown = xenbus_dev_shutdown,
- .dev_attrs = xenbus_dev_attrs,
-
- .suspend = xenbus_dev_suspend,
- .resume = xenbus_dev_resume,
- },
-};
-
-static void otherend_changed(struct xenbus_watch *watch,
- const char **vec, unsigned int len)
+void xenbus_otherend_changed(struct xenbus_watch *watch,
+ const char **vec, unsigned int len,
+ int ignore_on_shutdown)
{
struct xenbus_device *dev =
container_of(watch, struct xenbus_device, otherend_watch);
@@ -234,11 +192,7 @@
* work that can fail e.g., when the rootfs is gone.
*/
if (system_state > SYSTEM_RUNNING) {
- struct xen_bus_type *bus = bus;
- bus = container_of(dev->dev.bus, struct xen_bus_type, bus);
- /* If we're frontend, drive the state machine to Closed. */
- /* This should cause the backend to release our resources. */
- if ((bus == &xenbus_frontend) && (state == XenbusStateClosing))
+ if (ignore_on_shutdown && (state == XenbusStateClosing))
xenbus_frontend_closed(dev);
return;
}
@@ -246,25 +200,7 @@
if (drv->otherend_changed)
drv->otherend_changed(dev, state);
}
-
-
-static int talk_to_otherend(struct xenbus_device *dev)
-{
- struct xenbus_driver *drv = to_xenbus_driver(dev->dev.driver);
-
- free_otherend_watch(dev);
- free_otherend_details(dev);
-
- return drv->read_otherend_details(dev);
-}
-
-
-static int watch_otherend(struct xenbus_device *dev)
-{
- return xenbus_watch_pathfmt(dev, &dev->otherend_watch, otherend_changed,
- "%s/%s", dev->otherend, "state");
-}
-
+EXPORT_SYMBOL_GPL(xenbus_otherend_changed);
int xenbus_dev_probe(struct device *_dev)
{
@@ -308,8 +244,9 @@
fail:
xenbus_dev_error(dev, err, "xenbus_dev_probe on %s", dev->nodename);
xenbus_switch_state(dev, XenbusStateClosed);
- return -ENODEV;
+ return err;
}
+EXPORT_SYMBOL_GPL(xenbus_dev_probe);
int xenbus_dev_remove(struct device *_dev)
{
@@ -327,8 +264,9 @@
xenbus_switch_state(dev, XenbusStateClosed);
return 0;
}
+EXPORT_SYMBOL_GPL(xenbus_dev_remove);
-static void xenbus_dev_shutdown(struct device *_dev)
+void xenbus_dev_shutdown(struct device *_dev)
{
struct xenbus_device *dev = to_xenbus_device(_dev);
unsigned long timeout = 5*HZ;
@@ -349,6 +287,7 @@
out:
put_device(&dev->dev);
}
+EXPORT_SYMBOL_GPL(xenbus_dev_shutdown);
int xenbus_register_driver_common(struct xenbus_driver *drv,
struct xen_bus_type *bus,
@@ -362,25 +301,7 @@
return driver_register(&drv->driver);
}
-
-int __xenbus_register_frontend(struct xenbus_driver *drv,
- struct module *owner, const char *mod_name)
-{
- int ret;
-
- drv->read_otherend_details = read_backend_details;
-
- ret = xenbus_register_driver_common(drv, &xenbus_frontend,
- owner, mod_name);
- if (ret)
- return ret;
-
- /* If this driver is loaded as a module wait for devices to attach. */
- wait_for_devices(drv);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(__xenbus_register_frontend);
+EXPORT_SYMBOL_GPL(xenbus_register_driver_common);
void xenbus_unregister_driver(struct xenbus_driver *drv)
{
@@ -551,24 +472,7 @@
kfree(xendev);
return err;
}
-
-/* device/<typename>/<name> */
-static int xenbus_probe_frontend(const char *type, const char *name)
-{
- char *nodename;
- int err;
-
- nodename = kasprintf(GFP_KERNEL, "%s/%s/%s",
- xenbus_frontend.root, type, name);
- if (!nodename)
- return -ENOMEM;
-
- DPRINTK("%s", nodename);
-
- err = xenbus_probe_node(&xenbus_frontend, type, nodename);
- kfree(nodename);
- return err;
-}
+EXPORT_SYMBOL_GPL(xenbus_probe_node);
static int xenbus_probe_device_type(struct xen_bus_type *bus, const char *type)
{
@@ -582,10 +486,11 @@
return PTR_ERR(dir);
for (i = 0; i < dir_n; i++) {
- err = bus->probe(type, dir[i]);
+ err = bus->probe(bus, type, dir[i]);
if (err)
break;
}
+
kfree(dir);
return err;
}
@@ -605,9 +510,11 @@
if (err)
break;
}
+
kfree(dir);
return err;
}
+EXPORT_SYMBOL_GPL(xenbus_probe_devices);
static unsigned int char_count(const char *str, char c)
{
@@ -670,32 +577,18 @@
}
EXPORT_SYMBOL_GPL(xenbus_dev_changed);
-static void frontend_changed(struct xenbus_watch *watch,
- const char **vec, unsigned int len)
-{
- DPRINTK("");
-
- xenbus_dev_changed(vec[XS_WATCH_PATH], &xenbus_frontend);
-}
-
-/* We watch for devices appearing and vanishing. */
-static struct xenbus_watch fe_watch = {
- .node = "device",
- .callback = frontend_changed,
-};
-
-static int xenbus_dev_suspend(struct device *dev, pm_message_t state)
+int xenbus_dev_suspend(struct device *dev, pm_message_t state)
{
int err = 0;
struct xenbus_driver *drv;
- struct xenbus_device *xdev;
+ struct xenbus_device *xdev
+ = container_of(dev, struct xenbus_device, dev);
- DPRINTK("");
+ DPRINTK("%s", xdev->nodename);
if (dev->driver == NULL)
return 0;
drv = to_xenbus_driver(dev->driver);
- xdev = container_of(dev, struct xenbus_device, dev);
if (drv->suspend)
err = drv->suspend(xdev, state);
if (err)
@@ -703,21 +596,20 @@
"xenbus: suspend %s failed: %i\n", dev_name(dev), err);
return 0;
}
+EXPORT_SYMBOL_GPL(xenbus_dev_suspend);
-static int xenbus_dev_resume(struct device *dev)
+int xenbus_dev_resume(struct device *dev)
{
int err;
struct xenbus_driver *drv;
- struct xenbus_device *xdev;
+ struct xenbus_device *xdev
+ = container_of(dev, struct xenbus_device, dev);
- DPRINTK("");
+ DPRINTK("%s", xdev->nodename);
if (dev->driver == NULL)
return 0;
-
drv = to_xenbus_driver(dev->driver);
- xdev = container_of(dev, struct xenbus_device, dev);
-
err = talk_to_otherend(xdev);
if (err) {
printk(KERN_WARNING
@@ -748,6 +640,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(xenbus_dev_resume);
/* A flag to determine if xenstored is 'ready' (i.e. has started) */
int xenstored_ready = 0;
@@ -776,11 +669,6 @@
{
xenstored_ready = 1;
- /* Enumerate devices in xenstore and watch for changes. */
- xenbus_probe_devices(&xenbus_frontend);
- register_xenbus_watch(&fe_watch);
- xenbus_backend_probe_and_watch();
-
/* Notify others that xenstore is up */
blocking_notifier_call_chain(&xenstore_chain, 0, NULL);
}
@@ -809,16 +697,7 @@
err = -ENODEV;
if (!xen_domain())
- goto out_error;
-
- /* Register ourselves with the kernel bus subsystem */
- err = bus_register(&xenbus_frontend.bus);
- if (err)
- goto out_error;
-
- err = xenbus_backend_bus_register();
- if (err)
- goto out_unreg_front;
+ return err;
/*
* Domain0 doesn't have a store_evtchn or store_mfn yet.
@@ -874,7 +753,7 @@
if (err) {
printk(KERN_WARNING
"XENBUS: Error initializing xenstore comms: %i\n", err);
- goto out_unreg_back;
+ goto out_error;
}
#ifdef CONFIG_XEN_COMPAT_XENFS
@@ -887,133 +766,13 @@
return 0;
- out_unreg_back:
- xenbus_backend_bus_unregister();
-
- out_unreg_front:
- bus_unregister(&xenbus_frontend.bus);
-
out_error:
if (page != 0)
free_page(page);
+
return err;
}
postcore_initcall(xenbus_init);
MODULE_LICENSE("GPL");
-
-static int is_device_connecting(struct device *dev, void *data)
-{
- struct xenbus_device *xendev = to_xenbus_device(dev);
- struct device_driver *drv = data;
- struct xenbus_driver *xendrv;
-
- /*
- * A device with no driver will never connect. We care only about
- * devices which should currently be in the process of connecting.
- */
- if (!dev->driver)
- return 0;
-
- /* Is this search limited to a particular driver? */
- if (drv && (dev->driver != drv))
- return 0;
-
- xendrv = to_xenbus_driver(dev->driver);
- return (xendev->state < XenbusStateConnected ||
- (xendev->state == XenbusStateConnected &&
- xendrv->is_ready && !xendrv->is_ready(xendev)));
-}
-
-static int exists_connecting_device(struct device_driver *drv)
-{
- return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
- is_device_connecting);
-}
-
-static int print_device_status(struct device *dev, void *data)
-{
- struct xenbus_device *xendev = to_xenbus_device(dev);
- struct device_driver *drv = data;
-
- /* Is this operation limited to a particular driver? */
- if (drv && (dev->driver != drv))
- return 0;
-
- if (!dev->driver) {
- /* Information only: is this too noisy? */
- printk(KERN_INFO "XENBUS: Device with no driver: %s\n",
- xendev->nodename);
- } else if (xendev->state < XenbusStateConnected) {
- enum xenbus_state rstate = XenbusStateUnknown;
- if (xendev->otherend)
- rstate = xenbus_read_driver_state(xendev->otherend);
- printk(KERN_WARNING "XENBUS: Timeout connecting "
- "to device: %s (local state %d, remote state %d)\n",
- xendev->nodename, xendev->state, rstate);
- }
-
- return 0;
-}
-
-/* We only wait for device setup after most initcalls have run. */
-static int ready_to_wait_for_devices;
-
-/*
- * On a 5-minute timeout, wait for all devices currently configured. We need
- * to do this to guarantee that the filesystems and / or network devices
- * needed for boot are available, before we can allow the boot to proceed.
- *
- * This needs to be on a late_initcall, to happen after the frontend device
- * drivers have been initialised, but before the root fs is mounted.
- *
- * A possible improvement here would be to have the tools add a per-device
- * flag to the store entry, indicating whether it is needed at boot time.
- * This would allow people who knew what they were doing to accelerate their
- * boot slightly, but of course needs tools or manual intervention to set up
- * those flags correctly.
- */
-static void wait_for_devices(struct xenbus_driver *xendrv)
-{
- unsigned long start = jiffies;
- struct device_driver *drv = xendrv ? &xendrv->driver : NULL;
- unsigned int seconds_waited = 0;
-
- if (!ready_to_wait_for_devices || !xen_domain())
- return;
-
- while (exists_connecting_device(drv)) {
- if (time_after(jiffies, start + (seconds_waited+5)*HZ)) {
- if (!seconds_waited)
- printk(KERN_WARNING "XENBUS: Waiting for "
- "devices to initialise: ");
- seconds_waited += 5;
- printk("%us...", 300 - seconds_waited);
- if (seconds_waited == 300)
- break;
- }
-
- schedule_timeout_interruptible(HZ/10);
- }
-
- if (seconds_waited)
- printk("\n");
-
- bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
- print_device_status);
-}
-
-#ifndef MODULE
-static int __init boot_wait_for_devices(void)
-{
- if (xen_hvm_domain() && !xen_platform_pci_unplug)
- return -ENODEV;
-
- ready_to_wait_for_devices = 1;
- wait_for_devices(NULL);
- return 0;
-}
-
-late_initcall(boot_wait_for_devices);
-#endif
diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h
index 6c5e318..2466581 100644
--- a/drivers/xen/xenbus/xenbus_probe.h
+++ b/drivers/xen/xenbus/xenbus_probe.h
@@ -36,26 +36,15 @@
#define XEN_BUS_ID_SIZE 20
-#ifdef CONFIG_XEN_BACKEND
-extern void xenbus_backend_suspend(int (*fn)(struct device *, void *));
-extern void xenbus_backend_resume(int (*fn)(struct device *, void *));
-extern void xenbus_backend_probe_and_watch(void);
-extern int xenbus_backend_bus_register(void);
-extern void xenbus_backend_bus_unregister(void);
-#else
-static inline void xenbus_backend_suspend(int (*fn)(struct device *, void *)) {}
-static inline void xenbus_backend_resume(int (*fn)(struct device *, void *)) {}
-static inline void xenbus_backend_probe_and_watch(void) {}
-static inline int xenbus_backend_bus_register(void) { return 0; }
-static inline void xenbus_backend_bus_unregister(void) {}
-#endif
-
struct xen_bus_type
{
char *root;
unsigned int levels;
int (*get_bus_id)(char bus_id[XEN_BUS_ID_SIZE], const char *nodename);
- int (*probe)(const char *type, const char *dir);
+ int (*probe)(struct xen_bus_type *bus, const char *type,
+ const char *dir);
+ void (*otherend_changed)(struct xenbus_watch *watch, const char **vec,
+ unsigned int len);
struct bus_type bus;
};
@@ -73,4 +62,16 @@
extern void xenbus_dev_changed(const char *node, struct xen_bus_type *bus);
+extern void xenbus_dev_shutdown(struct device *_dev);
+
+extern int xenbus_dev_suspend(struct device *dev, pm_message_t state);
+extern int xenbus_dev_resume(struct device *dev);
+
+extern void xenbus_otherend_changed(struct xenbus_watch *watch,
+ const char **vec, unsigned int len,
+ int ignore_on_shutdown);
+
+extern int xenbus_read_otherend_details(struct xenbus_device *xendev,
+ char *id_node, char *path_node);
+
#endif
diff --git a/drivers/xen/xenbus/xenbus_probe_backend.c b/drivers/xen/xenbus/xenbus_probe_backend.c
new file mode 100644
index 0000000..6cf467b
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_probe_backend.c
@@ -0,0 +1,276 @@
+/******************************************************************************
+ * Talks to Xen Store to figure out what devices we have (backend half).
+ *
+ * Copyright (C) 2005 Rusty Russell, IBM Corporation
+ * Copyright (C) 2005 Mike Wray, Hewlett-Packard
+ * Copyright (C) 2005, 2006 XenSource Ltd
+ * Copyright (C) 2007 Solarflare Communications, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#define DPRINTK(fmt, args...) \
+ pr_debug("xenbus_probe (%s:%d) " fmt ".\n", \
+ __func__, __LINE__, ##args)
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/notifier.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/hypervisor.h>
+#include <xen/xenbus.h>
+#include <xen/features.h>
+
+#include "xenbus_comms.h"
+#include "xenbus_probe.h"
+
+/* backend/<type>/<fe-uuid>/<id> => <type>-<fe-domid>-<id> */
+static int backend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename)
+{
+ int domid, err;
+ const char *devid, *type, *frontend;
+ unsigned int typelen;
+
+ type = strchr(nodename, '/');
+ if (!type)
+ return -EINVAL;
+ type++;
+ typelen = strcspn(type, "/");
+ if (!typelen || type[typelen] != '/')
+ return -EINVAL;
+
+ devid = strrchr(nodename, '/') + 1;
+
+ err = xenbus_gather(XBT_NIL, nodename, "frontend-id", "%i", &domid,
+ "frontend", NULL, &frontend,
+ NULL);
+ if (err)
+ return err;
+ if (strlen(frontend) == 0)
+ err = -ERANGE;
+ if (!err && !xenbus_exists(XBT_NIL, frontend, ""))
+ err = -ENOENT;
+ kfree(frontend);
+
+ if (err)
+ return err;
+
+ if (snprintf(bus_id, XEN_BUS_ID_SIZE, "%.*s-%i-%s",
+ typelen, type, domid, devid) >= XEN_BUS_ID_SIZE)
+ return -ENOSPC;
+ return 0;
+}
+
+static int xenbus_uevent_backend(struct device *dev,
+ struct kobj_uevent_env *env)
+{
+ struct xenbus_device *xdev;
+ struct xenbus_driver *drv;
+ struct xen_bus_type *bus;
+
+ DPRINTK("");
+
+ if (dev == NULL)
+ return -ENODEV;
+
+ xdev = to_xenbus_device(dev);
+ bus = container_of(xdev->dev.bus, struct xen_bus_type, bus);
+ if (xdev == NULL)
+ return -ENODEV;
+
+ /* stuff we want to pass to /sbin/hotplug */
+ if (add_uevent_var(env, "XENBUS_TYPE=%s", xdev->devicetype))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "XENBUS_PATH=%s", xdev->nodename))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "XENBUS_BASE_PATH=%s", bus->root))
+ return -ENOMEM;
+
+ if (dev->driver) {
+ drv = to_xenbus_driver(dev->driver);
+ if (drv && drv->uevent)
+ return drv->uevent(xdev, env);
+ }
+
+ return 0;
+}
+
+/* backend/<typename>/<frontend-uuid>/<name> */
+static int xenbus_probe_backend_unit(struct xen_bus_type *bus,
+ const char *dir,
+ const char *type,
+ const char *name)
+{
+ char *nodename;
+ int err;
+
+ nodename = kasprintf(GFP_KERNEL, "%s/%s", dir, name);
+ if (!nodename)
+ return -ENOMEM;
+
+ DPRINTK("%s\n", nodename);
+
+ err = xenbus_probe_node(bus, type, nodename);
+ kfree(nodename);
+ return err;
+}
+
+/* backend/<typename>/<frontend-domid> */
+static int xenbus_probe_backend(struct xen_bus_type *bus, const char *type,
+ const char *domid)
+{
+ char *nodename;
+ int err = 0;
+ char **dir;
+ unsigned int i, dir_n = 0;
+
+ DPRINTK("");
+
+ nodename = kasprintf(GFP_KERNEL, "%s/%s/%s", bus->root, type, domid);
+ if (!nodename)
+ return -ENOMEM;
+
+ dir = xenbus_directory(XBT_NIL, nodename, "", &dir_n);
+ if (IS_ERR(dir)) {
+ kfree(nodename);
+ return PTR_ERR(dir);
+ }
+
+ for (i = 0; i < dir_n; i++) {
+ err = xenbus_probe_backend_unit(bus, nodename, type, dir[i]);
+ if (err)
+ break;
+ }
+ kfree(dir);
+ kfree(nodename);
+ return err;
+}
+
+static void frontend_changed(struct xenbus_watch *watch,
+ const char **vec, unsigned int len)
+{
+ xenbus_otherend_changed(watch, vec, len, 0);
+}
+
+static struct device_attribute xenbus_backend_dev_attrs[] = {
+ __ATTR_NULL
+};
+
+static struct xen_bus_type xenbus_backend = {
+ .root = "backend",
+ .levels = 3, /* backend/type/<frontend>/<id> */
+ .get_bus_id = backend_bus_id,
+ .probe = xenbus_probe_backend,
+ .otherend_changed = frontend_changed,
+ .bus = {
+ .name = "xen-backend",
+ .match = xenbus_match,
+ .uevent = xenbus_uevent_backend,
+ .probe = xenbus_dev_probe,
+ .remove = xenbus_dev_remove,
+ .shutdown = xenbus_dev_shutdown,
+ .dev_attrs = xenbus_backend_dev_attrs,
+ },
+};
+
+static void backend_changed(struct xenbus_watch *watch,
+ const char **vec, unsigned int len)
+{
+ DPRINTK("");
+
+ xenbus_dev_changed(vec[XS_WATCH_PATH], &xenbus_backend);
+}
+
+static struct xenbus_watch be_watch = {
+ .node = "backend",
+ .callback = backend_changed,
+};
+
+static int read_frontend_details(struct xenbus_device *xendev)
+{
+ return xenbus_read_otherend_details(xendev, "frontend-id", "frontend");
+}
+
+int xenbus_dev_is_online(struct xenbus_device *dev)
+{
+ int rc, val;
+
+ rc = xenbus_scanf(XBT_NIL, dev->nodename, "online", "%d", &val);
+ if (rc != 1)
+ val = 0; /* no online node present */
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(xenbus_dev_is_online);
+
+int __xenbus_register_backend(struct xenbus_driver *drv,
+ struct module *owner, const char *mod_name)
+{
+ drv->read_otherend_details = read_frontend_details;
+
+ return xenbus_register_driver_common(drv, &xenbus_backend,
+ owner, mod_name);
+}
+EXPORT_SYMBOL_GPL(__xenbus_register_backend);
+
+static int backend_probe_and_watch(struct notifier_block *notifier,
+ unsigned long event,
+ void *data)
+{
+ /* Enumerate devices in xenstore and watch for changes. */
+ xenbus_probe_devices(&xenbus_backend);
+ register_xenbus_watch(&be_watch);
+
+ return NOTIFY_DONE;
+}
+
+static int __init xenbus_probe_backend_init(void)
+{
+ static struct notifier_block xenstore_notifier = {
+ .notifier_call = backend_probe_and_watch
+ };
+ int err;
+
+ DPRINTK("");
+
+ /* Register ourselves with the kernel bus subsystem */
+ err = bus_register(&xenbus_backend.bus);
+ if (err)
+ return err;
+
+ register_xenstore_notifier(&xenstore_notifier);
+
+ return 0;
+}
+subsys_initcall(xenbus_probe_backend_init);
diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c
new file mode 100644
index 0000000..5bcc2d6
--- /dev/null
+++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
@@ -0,0 +1,294 @@
+#define DPRINTK(fmt, args...) \
+ pr_debug("xenbus_probe (%s:%d) " fmt ".\n", \
+ __func__, __LINE__, ##args)
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/notifier.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/xen/hypervisor.h>
+#include <xen/xenbus.h>
+#include <xen/events.h>
+#include <xen/page.h>
+
+#include <xen/platform_pci.h>
+
+#include "xenbus_comms.h"
+#include "xenbus_probe.h"
+
+
+/* device/<type>/<id> => <type>-<id> */
+static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename)
+{
+ nodename = strchr(nodename, '/');
+ if (!nodename || strlen(nodename + 1) >= XEN_BUS_ID_SIZE) {
+ printk(KERN_WARNING "XENBUS: bad frontend %s\n", nodename);
+ return -EINVAL;
+ }
+
+ strlcpy(bus_id, nodename + 1, XEN_BUS_ID_SIZE);
+ if (!strchr(bus_id, '/')) {
+ printk(KERN_WARNING "XENBUS: bus_id %s no slash\n", bus_id);
+ return -EINVAL;
+ }
+ *strchr(bus_id, '/') = '-';
+ return 0;
+}
+
+/* device/<typename>/<name> */
+static int xenbus_probe_frontend(struct xen_bus_type *bus, const char *type,
+ const char *name)
+{
+ char *nodename;
+ int err;
+
+ nodename = kasprintf(GFP_KERNEL, "%s/%s/%s", bus->root, type, name);
+ if (!nodename)
+ return -ENOMEM;
+
+ DPRINTK("%s", nodename);
+
+ err = xenbus_probe_node(bus, type, nodename);
+ kfree(nodename);
+ return err;
+}
+
+static int xenbus_uevent_frontend(struct device *_dev,
+ struct kobj_uevent_env *env)
+{
+ struct xenbus_device *dev = to_xenbus_device(_dev);
+
+ if (add_uevent_var(env, "MODALIAS=xen:%s", dev->devicetype))
+ return -ENOMEM;
+
+ return 0;
+}
+
+
+static void backend_changed(struct xenbus_watch *watch,
+ const char **vec, unsigned int len)
+{
+ xenbus_otherend_changed(watch, vec, len, 1);
+}
+
+static struct device_attribute xenbus_frontend_dev_attrs[] = {
+ __ATTR_NULL
+};
+
+static struct xen_bus_type xenbus_frontend = {
+ .root = "device",
+ .levels = 2, /* device/type/<id> */
+ .get_bus_id = frontend_bus_id,
+ .probe = xenbus_probe_frontend,
+ .otherend_changed = backend_changed,
+ .bus = {
+ .name = "xen",
+ .match = xenbus_match,
+ .uevent = xenbus_uevent_frontend,
+ .probe = xenbus_dev_probe,
+ .remove = xenbus_dev_remove,
+ .shutdown = xenbus_dev_shutdown,
+ .dev_attrs = xenbus_frontend_dev_attrs,
+
+ .suspend = xenbus_dev_suspend,
+ .resume = xenbus_dev_resume,
+ },
+};
+
+static void frontend_changed(struct xenbus_watch *watch,
+ const char **vec, unsigned int len)
+{
+ DPRINTK("");
+
+ xenbus_dev_changed(vec[XS_WATCH_PATH], &xenbus_frontend);
+}
+
+
+/* We watch for devices appearing and vanishing. */
+static struct xenbus_watch fe_watch = {
+ .node = "device",
+ .callback = frontend_changed,
+};
+
+static int read_backend_details(struct xenbus_device *xendev)
+{
+ return xenbus_read_otherend_details(xendev, "backend-id", "backend");
+}
+
+static int is_device_connecting(struct device *dev, void *data)
+{
+ struct xenbus_device *xendev = to_xenbus_device(dev);
+ struct device_driver *drv = data;
+ struct xenbus_driver *xendrv;
+
+ /*
+ * A device with no driver will never connect. We care only about
+ * devices which should currently be in the process of connecting.
+ */
+ if (!dev->driver)
+ return 0;
+
+ /* Is this search limited to a particular driver? */
+ if (drv && (dev->driver != drv))
+ return 0;
+
+ xendrv = to_xenbus_driver(dev->driver);
+ return (xendev->state < XenbusStateConnected ||
+ (xendev->state == XenbusStateConnected &&
+ xendrv->is_ready && !xendrv->is_ready(xendev)));
+}
+
+static int exists_connecting_device(struct device_driver *drv)
+{
+ return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
+ is_device_connecting);
+}
+
+static int print_device_status(struct device *dev, void *data)
+{
+ struct xenbus_device *xendev = to_xenbus_device(dev);
+ struct device_driver *drv = data;
+
+ /* Is this operation limited to a particular driver? */
+ if (drv && (dev->driver != drv))
+ return 0;
+
+ if (!dev->driver) {
+ /* Information only: is this too noisy? */
+ printk(KERN_INFO "XENBUS: Device with no driver: %s\n",
+ xendev->nodename);
+ } else if (xendev->state < XenbusStateConnected) {
+ enum xenbus_state rstate = XenbusStateUnknown;
+ if (xendev->otherend)
+ rstate = xenbus_read_driver_state(xendev->otherend);
+ printk(KERN_WARNING "XENBUS: Timeout connecting "
+ "to device: %s (local state %d, remote state %d)\n",
+ xendev->nodename, xendev->state, rstate);
+ }
+
+ return 0;
+}
+
+/* We only wait for device setup after most initcalls have run. */
+static int ready_to_wait_for_devices;
+
+/*
+ * On a 5-minute timeout, wait for all devices currently configured. We need
+ * to do this to guarantee that the filesystems and / or network devices
+ * needed for boot are available, before we can allow the boot to proceed.
+ *
+ * This needs to be on a late_initcall, to happen after the frontend device
+ * drivers have been initialised, but before the root fs is mounted.
+ *
+ * A possible improvement here would be to have the tools add a per-device
+ * flag to the store entry, indicating whether it is needed at boot time.
+ * This would allow people who knew what they were doing to accelerate their
+ * boot slightly, but of course needs tools or manual intervention to set up
+ * those flags correctly.
+ */
+static void wait_for_devices(struct xenbus_driver *xendrv)
+{
+ unsigned long start = jiffies;
+ struct device_driver *drv = xendrv ? &xendrv->driver : NULL;
+ unsigned int seconds_waited = 0;
+
+ if (!ready_to_wait_for_devices || !xen_domain())
+ return;
+
+ while (exists_connecting_device(drv)) {
+ if (time_after(jiffies, start + (seconds_waited+5)*HZ)) {
+ if (!seconds_waited)
+ printk(KERN_WARNING "XENBUS: Waiting for "
+ "devices to initialise: ");
+ seconds_waited += 5;
+ printk("%us...", 300 - seconds_waited);
+ if (seconds_waited == 300)
+ break;
+ }
+
+ schedule_timeout_interruptible(HZ/10);
+ }
+
+ if (seconds_waited)
+ printk("\n");
+
+ bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
+ print_device_status);
+}
+
+int __xenbus_register_frontend(struct xenbus_driver *drv,
+ struct module *owner, const char *mod_name)
+{
+ int ret;
+
+ drv->read_otherend_details = read_backend_details;
+
+ ret = xenbus_register_driver_common(drv, &xenbus_frontend,
+ owner, mod_name);
+ if (ret)
+ return ret;
+
+ /* If this driver is loaded as a module wait for devices to attach. */
+ wait_for_devices(drv);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__xenbus_register_frontend);
+
+static int frontend_probe_and_watch(struct notifier_block *notifier,
+ unsigned long event,
+ void *data)
+{
+ /* Enumerate devices in xenstore and watch for changes. */
+ xenbus_probe_devices(&xenbus_frontend);
+ register_xenbus_watch(&fe_watch);
+
+ return NOTIFY_DONE;
+}
+
+
+static int __init xenbus_probe_frontend_init(void)
+{
+ static struct notifier_block xenstore_notifier = {
+ .notifier_call = frontend_probe_and_watch
+ };
+ int err;
+
+ DPRINTK("");
+
+ /* Register ourselves with the kernel bus subsystem */
+ err = bus_register(&xenbus_frontend.bus);
+ if (err)
+ return err;
+
+ register_xenstore_notifier(&xenstore_notifier);
+
+ return 0;
+}
+subsys_initcall(xenbus_probe_frontend_init);
+
+#ifndef MODULE
+static int __init boot_wait_for_devices(void)
+{
+ if (xen_hvm_domain() && !xen_platform_pci_unplug)
+ return -ENODEV;
+
+ ready_to_wait_for_devices = 1;
+ wait_for_devices(NULL);
+ return 0;
+}
+
+late_initcall(boot_wait_for_devices);
+#endif
+
+MODULE_LICENSE("GPL");
diff --git a/fs/ntfs/Makefile b/fs/ntfs/Makefile
index 58b6be9..4ff028f 100644
--- a/fs/ntfs/Makefile
+++ b/fs/ntfs/Makefile
@@ -6,7 +6,7 @@
index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
unistr.o upcase.o
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.29\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.30\"
ifeq ($(CONFIG_NTFS_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index 113ebd9..f4b1057 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -1,7 +1,7 @@
/*
* file.c - NTFS kernel file operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
*
* This program/include file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
@@ -1380,15 +1380,14 @@
* pages (out to offset + bytes), to emulate ntfs_copy_from_user()'s
* single-segment behaviour.
*
- * We call the same helper (__ntfs_copy_from_user_iovec_inatomic()) both
- * when atomic and when not atomic. This is ok because
- * __ntfs_copy_from_user_iovec_inatomic() calls __copy_from_user_inatomic()
- * and it is ok to call this when non-atomic.
- * Infact, the only difference between __copy_from_user_inatomic() and
+ * We call the same helper (__ntfs_copy_from_user_iovec_inatomic()) both when
+ * atomic and when not atomic. This is ok because it calls
+ * __copy_from_user_inatomic() and it is ok to call this when non-atomic. In
+ * fact, the only difference between __copy_from_user_inatomic() and
* __copy_from_user() is that the latter calls might_sleep() and the former
- * should not zero the tail of the buffer on error. And on many
- * architectures __copy_from_user_inatomic() is just defined to
- * __copy_from_user() so it makes no difference at all on those architectures.
+ * should not zero the tail of the buffer on error. And on many architectures
+ * __copy_from_user_inatomic() is just defined to __copy_from_user() so it
+ * makes no difference at all on those architectures.
*/
static inline size_t ntfs_copy_from_user_iovec(struct page **pages,
unsigned nr_pages, unsigned ofs, const struct iovec **iov,
@@ -1409,28 +1408,28 @@
if (unlikely(copied != len)) {
/* Do it the slow way. */
addr = kmap(*pages);
- copied = __ntfs_copy_from_user_iovec_inatomic(addr + ofs,
- *iov, *iov_ofs, len);
- /*
- * Zero the rest of the target like __copy_from_user().
- */
- memset(addr + ofs + copied, 0, len - copied);
- kunmap(*pages);
+ copied = __ntfs_copy_from_user_iovec_inatomic(addr +
+ ofs, *iov, *iov_ofs, len);
if (unlikely(copied != len))
goto err_out;
+ kunmap(*pages);
}
total += len;
+ ntfs_set_next_iovec(iov, iov_ofs, len);
bytes -= len;
if (!bytes)
break;
- ntfs_set_next_iovec(iov, iov_ofs, len);
ofs = 0;
} while (++pages < last_page);
out:
return total;
err_out:
- total += copied;
+ BUG_ON(copied > len);
/* Zero the rest of the target like __copy_from_user(). */
+ memset(addr + ofs + copied, 0, len - copied);
+ kunmap(*pages);
+ total += copied;
+ ntfs_set_next_iovec(iov, iov_ofs, copied);
while (++pages < last_page) {
bytes -= len;
if (!bytes)
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index a30ecacc..29099a0 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -1,7 +1,7 @@
/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
@@ -3193,8 +3193,8 @@
ntfs_sysctl(0);
}
-MODULE_AUTHOR("Anton Altaparmakov <aia21@cantab.net>");
-MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2007 Anton Altaparmakov");
+MODULE_AUTHOR("Anton Altaparmakov <anton@tuxera.com>");
+MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.");
MODULE_VERSION(NTFS_VERSION);
MODULE_LICENSE("GPL");
#ifdef DEBUG
diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h
index 43e2d7d..7a1d15f 100644
--- a/include/xen/xenbus.h
+++ b/include/xen/xenbus.h
@@ -94,7 +94,7 @@
int (*remove)(struct xenbus_device *dev);
int (*suspend)(struct xenbus_device *dev, pm_message_t state);
int (*resume)(struct xenbus_device *dev);
- int (*uevent)(struct xenbus_device *, char **, int, char *, int);
+ int (*uevent)(struct xenbus_device *, struct kobj_uevent_env *);
struct device_driver driver;
int (*read_otherend_details)(struct xenbus_device *dev);
int (*is_ready)(struct xenbus_device *dev);
diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile
new file mode 100644
index 0000000..fd8e1f1
--- /dev/null
+++ b/tools/power/x86/turbostat/Makefile
@@ -0,0 +1,8 @@
+turbostat : turbostat.c
+
+clean :
+ rm -f turbostat
+
+install :
+ install turbostat /usr/bin/turbostat
+ install turbostat.8 /usr/share/man/man8
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
new file mode 100644
index 0000000..ff75125
--- /dev/null
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -0,0 +1,172 @@
+.TH TURBOSTAT 8
+.SH NAME
+turbostat \- Report processor frequency and idle statistics
+.SH SYNOPSIS
+.ft B
+.B turbostat
+.RB [ "\-v" ]
+.RB [ "\-M MSR#" ]
+.RB command
+.br
+.B turbostat
+.RB [ "\-v" ]
+.RB [ "\-M MSR#" ]
+.RB [ "\-i interval_sec" ]
+.SH DESCRIPTION
+\fBturbostat \fP reports processor topology, frequency
+and idle power state statistics on modern X86 processors.
+Either \fBcommand\fP is forked and statistics are printed
+upon its completion, or statistics are printed periodically.
+
+\fBturbostat \fP
+requires that the processor
+supports an "invariant" TSC, plus the APERF and MPERF MSRs.
+\fBturbostat \fP will report idle cpu power state residency
+on processors that additionally support C-state residency counters.
+
+.SS Options
+The \fB-v\fP option increases verbosity.
+.PP
+The \fB-M MSR#\fP option dumps the specified MSR,
+in addition to the usual frequency and idle statistics.
+.PP
+The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds.
+The default is 5 seconds.
+.PP
+The \fBcommand\fP parameter forks \fBcommand\fP and upon its exit,
+displays the statistics gathered since it was forked.
+.PP
+.SH FIELD DESCRIPTIONS
+.nf
+\fBpkg\fP processor package number.
+\fBcore\fP processor core number.
+\fBCPU\fP Linux CPU (logical processor) number.
+\fB%c0\fP percent of the interval that the CPU retired instructions.
+\fBGHz\fP average clock rate while the CPU was in c0 state.
+\fBTSC\fP average GHz that the TSC ran during the entire interval.
+\fB%c1, %c3, %c6\fP show the percentage residency in hardware core idle states.
+\fB%pc3, %pc6\fP percentage residency in hardware package idle states.
+.fi
+.PP
+.SH EXAMPLE
+Without any parameters, turbostat prints out counters ever 5 seconds.
+(override interval with "-i sec" option, or specify a command
+for turbostat to fork).
+
+The first row of statistics reflect the average for the entire system.
+Subsequent rows show per-CPU statistics.
+
+.nf
+[root@x980]# ./turbostat
+core CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
+ 0.04 1.62 3.38 0.11 0.00 99.85 0.00 95.07
+ 0 0 0.04 1.62 3.38 0.06 0.00 99.90 0.00 95.07
+ 0 6 0.02 1.62 3.38 0.08 0.00 99.90 0.00 95.07
+ 1 2 0.10 1.62 3.38 0.29 0.00 99.61 0.00 95.07
+ 1 8 0.11 1.62 3.38 0.28 0.00 99.61 0.00 95.07
+ 2 4 0.01 1.62 3.38 0.01 0.00 99.98 0.00 95.07
+ 2 10 0.01 1.61 3.38 0.02 0.00 99.98 0.00 95.07
+ 8 1 0.07 1.62 3.38 0.15 0.00 99.78 0.00 95.07
+ 8 7 0.03 1.62 3.38 0.19 0.00 99.78 0.00 95.07
+ 9 3 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07
+ 9 9 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07
+ 10 5 0.01 1.62 3.38 0.13 0.00 99.86 0.00 95.07
+ 10 11 0.08 1.62 3.38 0.05 0.00 99.86 0.00 95.07
+.fi
+.SH VERBOSE EXAMPLE
+The "-v" option adds verbosity to the output:
+
+.nf
+GenuineIntel 11 CPUID levels; family:model:stepping 0x6:2c:2 (6:44:2)
+12 * 133 = 1600 MHz max efficiency
+25 * 133 = 3333 MHz TSC frequency
+26 * 133 = 3467 MHz max turbo 4 active cores
+26 * 133 = 3467 MHz max turbo 3 active cores
+27 * 133 = 3600 MHz max turbo 2 active cores
+27 * 133 = 3600 MHz max turbo 1 active cores
+
+.fi
+The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
+available at the minimum package voltage. The \fBTSC frequency\fP is the nominal
+maximum frequency of the processor if turbo-mode were not available. This frequency
+should be sustainable on all CPUs indefinitely, given nominal power and cooling.
+The remaining rows show what maximum turbo frequency is possible
+depending on the number of idle cores. Note that this information is
+not available on all processors.
+.SH FORK EXAMPLE
+If turbostat is invoked with a command, it will fork that command
+and output the statistics gathered when the command exits.
+eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
+until ^C while the other CPUs are mostly idle:
+
+.nf
+[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
+
+^Ccore CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
+ 8.49 3.63 3.38 16.23 0.66 74.63 0.00 0.00
+ 0 0 1.22 3.62 3.38 32.18 0.00 66.60 0.00 0.00
+ 0 6 0.40 3.61 3.38 33.00 0.00 66.60 0.00 0.00
+ 1 2 0.11 3.14 3.38 0.19 3.95 95.75 0.00 0.00
+ 1 8 0.05 2.88 3.38 0.25 3.95 95.75 0.00 0.00
+ 2 4 0.00 3.13 3.38 0.02 0.00 99.98 0.00 0.00
+ 2 10 0.00 3.09 3.38 0.02 0.00 99.98 0.00 0.00
+ 8 1 0.04 3.50 3.38 14.43 0.00 85.54 0.00 0.00
+ 8 7 0.03 2.98 3.38 14.43 0.00 85.54 0.00 0.00
+ 9 3 0.00 3.16 3.38 100.00 0.00 0.00 0.00 0.00
+ 9 9 99.93 3.63 3.38 0.06 0.00 0.00 0.00 0.00
+ 10 5 0.01 2.82 3.38 0.08 0.00 99.91 0.00 0.00
+ 10 11 0.02 3.36 3.38 0.06 0.00 99.91 0.00 0.00
+6.950866 sec
+
+.fi
+Above the cycle soaker drives cpu9 up 3.6 Ghz turbo limit
+while the other processors are generally in various states of idle.
+
+Note that cpu3 is an HT sibling sharing core9
+with cpu9, and thus it is unable to get to an idle state
+deeper than c1 while cpu9 is busy.
+
+Note that turbostat reports average GHz of 3.61, while
+the arithmetic average of the GHz column above is 3.24.
+This is a weighted average, where the weight is %c0. ie. it is the total number of
+un-halted cycles elapsed per time divided by the number of CPUs.
+.SH NOTES
+
+.B "turbostat "
+must be run as root.
+
+.B "turbostat "
+reads hardware counters, but doesn't write them.
+So it will not interfere with the OS or other programs, including
+multiple invocations of itself.
+
+\fBturbostat \fP
+may work poorly on Linux-2.6.20 through 2.6.29,
+as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF
+in those kernels.
+
+The APERF, MPERF MSRs are defined to count non-halted cycles.
+Although it is not guaranteed by the architecture, turbostat assumes
+that they count at TSC rate, which is true on all processors tested to date.
+
+.SH REFERENCES
+"Intel® Turbo Boost Technology
+in Intel® Core™ Microarchitecture (Nehalem) Based Processors"
+http://download.intel.com/design/processor/applnots/320354.pdf
+
+"Intel® 64 and IA-32 Architectures Software Developer's Manual
+Volume 3B: System Programming Guide"
+http://www.intel.com/products/processor/manuals/
+
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+.fi
+
+.SH "SEE ALSO"
+msr(4), vmstat(8)
+.PP
+.SH AUTHORS
+.nf
+Written by Len Brown <len.brown@intel.com>
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
new file mode 100644
index 0000000..4c6983d
--- /dev/null
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -0,0 +1,1048 @@
+/*
+ * turbostat -- show CPU frequency and C-state residency
+ * on modern Intel turbo-capable processors.
+ *
+ * Copyright (c) 2010, Intel Corporation.
+ * Len Brown <len.brown@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/stat.h>
+#include <sys/resource.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <sys/time.h>
+#include <stdlib.h>
+#include <dirent.h>
+#include <string.h>
+#include <ctype.h>
+
+#define MSR_TSC 0x10
+#define MSR_NEHALEM_PLATFORM_INFO 0xCE
+#define MSR_NEHALEM_TURBO_RATIO_LIMIT 0x1AD
+#define MSR_APERF 0xE8
+#define MSR_MPERF 0xE7
+#define MSR_PKG_C2_RESIDENCY 0x60D /* SNB only */
+#define MSR_PKG_C3_RESIDENCY 0x3F8
+#define MSR_PKG_C6_RESIDENCY 0x3F9
+#define MSR_PKG_C7_RESIDENCY 0x3FA /* SNB only */
+#define MSR_CORE_C3_RESIDENCY 0x3FC
+#define MSR_CORE_C6_RESIDENCY 0x3FD
+#define MSR_CORE_C7_RESIDENCY 0x3FE /* SNB only */
+
+char *proc_stat = "/proc/stat";
+unsigned int interval_sec = 5; /* set with -i interval_sec */
+unsigned int verbose; /* set with -v */
+unsigned int skip_c0;
+unsigned int skip_c1;
+unsigned int do_nhm_cstates;
+unsigned int do_snb_cstates;
+unsigned int has_aperf;
+unsigned int units = 1000000000; /* Ghz etc */
+unsigned int genuine_intel;
+unsigned int has_invariant_tsc;
+unsigned int do_nehalem_platform_info;
+unsigned int do_nehalem_turbo_ratio_limit;
+unsigned int extra_msr_offset;
+double bclk;
+unsigned int show_pkg;
+unsigned int show_core;
+unsigned int show_cpu;
+
+int aperf_mperf_unstable;
+int backwards_count;
+char *progname;
+int need_reinitialize;
+
+int num_cpus;
+
+typedef struct per_cpu_counters {
+ unsigned long long tsc; /* per thread */
+ unsigned long long aperf; /* per thread */
+ unsigned long long mperf; /* per thread */
+ unsigned long long c1; /* per thread (calculated) */
+ unsigned long long c3; /* per core */
+ unsigned long long c6; /* per core */
+ unsigned long long c7; /* per core */
+ unsigned long long pc2; /* per package */
+ unsigned long long pc3; /* per package */
+ unsigned long long pc6; /* per package */
+ unsigned long long pc7; /* per package */
+ unsigned long long extra_msr; /* per thread */
+ int pkg;
+ int core;
+ int cpu;
+ struct per_cpu_counters *next;
+} PCC;
+
+PCC *pcc_even;
+PCC *pcc_odd;
+PCC *pcc_delta;
+PCC *pcc_average;
+struct timeval tv_even;
+struct timeval tv_odd;
+struct timeval tv_delta;
+
+unsigned long long get_msr(int cpu, off_t offset)
+{
+ ssize_t retval;
+ unsigned long long msr;
+ char pathname[32];
+ int fd;
+
+ sprintf(pathname, "/dev/cpu/%d/msr", cpu);
+ fd = open(pathname, O_RDONLY);
+ if (fd < 0) {
+ perror(pathname);
+ need_reinitialize = 1;
+ return 0;
+ }
+
+ retval = pread(fd, &msr, sizeof msr, offset);
+ if (retval != sizeof msr) {
+ fprintf(stderr, "cpu%d pread(..., 0x%zx) = %jd\n",
+ cpu, offset, retval);
+ exit(-2);
+ }
+
+ close(fd);
+ return msr;
+}
+
+void print_header()
+{
+ if (show_pkg)
+ fprintf(stderr, "pkg ");
+ if (show_core)
+ fprintf(stderr, "core");
+ if (show_cpu)
+ fprintf(stderr, " CPU");
+ if (do_nhm_cstates)
+ fprintf(stderr, " %%c0 ");
+ if (has_aperf)
+ fprintf(stderr, " GHz");
+ fprintf(stderr, " TSC");
+ if (do_nhm_cstates)
+ fprintf(stderr, " %%c1 ");
+ if (do_nhm_cstates)
+ fprintf(stderr, " %%c3 ");
+ if (do_nhm_cstates)
+ fprintf(stderr, " %%c6 ");
+ if (do_snb_cstates)
+ fprintf(stderr, " %%c7 ");
+ if (do_snb_cstates)
+ fprintf(stderr, " %%pc2 ");
+ if (do_nhm_cstates)
+ fprintf(stderr, " %%pc3 ");
+ if (do_nhm_cstates)
+ fprintf(stderr, " %%pc6 ");
+ if (do_snb_cstates)
+ fprintf(stderr, " %%pc7 ");
+ if (extra_msr_offset)
+ fprintf(stderr, " MSR 0x%x ", extra_msr_offset);
+
+ putc('\n', stderr);
+}
+
+void dump_pcc(PCC *pcc)
+{
+ fprintf(stderr, "package: %d ", pcc->pkg);
+ fprintf(stderr, "core:: %d ", pcc->core);
+ fprintf(stderr, "CPU: %d ", pcc->cpu);
+ fprintf(stderr, "TSC: %016llX\n", pcc->tsc);
+ fprintf(stderr, "c3: %016llX\n", pcc->c3);
+ fprintf(stderr, "c6: %016llX\n", pcc->c6);
+ fprintf(stderr, "c7: %016llX\n", pcc->c7);
+ fprintf(stderr, "aperf: %016llX\n", pcc->aperf);
+ fprintf(stderr, "pc2: %016llX\n", pcc->pc2);
+ fprintf(stderr, "pc3: %016llX\n", pcc->pc3);
+ fprintf(stderr, "pc6: %016llX\n", pcc->pc6);
+ fprintf(stderr, "pc7: %016llX\n", pcc->pc7);
+ fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, pcc->extra_msr);
+}
+
+void dump_list(PCC *pcc)
+{
+ printf("dump_list 0x%p\n", pcc);
+
+ for (; pcc; pcc = pcc->next)
+ dump_pcc(pcc);
+}
+
+void print_pcc(PCC *p)
+{
+ double interval_float;
+
+ interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0;
+
+ /* topology columns, print blanks on 1st (average) line */
+ if (p == pcc_average) {
+ if (show_pkg)
+ fprintf(stderr, " ");
+ if (show_core)
+ fprintf(stderr, " ");
+ if (show_cpu)
+ fprintf(stderr, " ");
+ } else {
+ if (show_pkg)
+ fprintf(stderr, "%4d", p->pkg);
+ if (show_core)
+ fprintf(stderr, "%4d", p->core);
+ if (show_cpu)
+ fprintf(stderr, "%4d", p->cpu);
+ }
+
+ /* %c0 */
+ if (do_nhm_cstates) {
+ if (!skip_c0)
+ fprintf(stderr, "%7.2f", 100.0 * p->mperf/p->tsc);
+ else
+ fprintf(stderr, " ****");
+ }
+
+ /* GHz */
+ if (has_aperf) {
+ if (!aperf_mperf_unstable) {
+ fprintf(stderr, "%5.2f",
+ 1.0 * p->tsc / units * p->aperf /
+ p->mperf / interval_float);
+ } else {
+ if (p->aperf > p->tsc || p->mperf > p->tsc) {
+ fprintf(stderr, " ****");
+ } else {
+ fprintf(stderr, "%4.1f*",
+ 1.0 * p->tsc /
+ units * p->aperf /
+ p->mperf / interval_float);
+ }
+ }
+ }
+
+ /* TSC */
+ fprintf(stderr, "%5.2f", 1.0 * p->tsc/units/interval_float);
+
+ if (do_nhm_cstates) {
+ if (!skip_c1)
+ fprintf(stderr, "%7.2f", 100.0 * p->c1/p->tsc);
+ else
+ fprintf(stderr, " ****");
+ }
+ if (do_nhm_cstates)
+ fprintf(stderr, "%7.2f", 100.0 * p->c3/p->tsc);
+ if (do_nhm_cstates)
+ fprintf(stderr, "%7.2f", 100.0 * p->c6/p->tsc);
+ if (do_snb_cstates)
+ fprintf(stderr, "%7.2f", 100.0 * p->c7/p->tsc);
+ if (do_snb_cstates)
+ fprintf(stderr, "%7.2f", 100.0 * p->pc2/p->tsc);
+ if (do_nhm_cstates)
+ fprintf(stderr, "%7.2f", 100.0 * p->pc3/p->tsc);
+ if (do_nhm_cstates)
+ fprintf(stderr, "%7.2f", 100.0 * p->pc6/p->tsc);
+ if (do_snb_cstates)
+ fprintf(stderr, "%7.2f", 100.0 * p->pc7/p->tsc);
+ if (extra_msr_offset)
+ fprintf(stderr, " 0x%016llx", p->extra_msr);
+ putc('\n', stderr);
+}
+
+void print_counters(PCC *cnt)
+{
+ PCC *pcc;
+
+ print_header();
+
+ if (num_cpus > 1)
+ print_pcc(pcc_average);
+
+ for (pcc = cnt; pcc != NULL; pcc = pcc->next)
+ print_pcc(pcc);
+
+}
+
+#define SUBTRACT_COUNTER(after, before, delta) (delta = (after - before), (before > after))
+
+
+int compute_delta(PCC *after, PCC *before, PCC *delta)
+{
+ int errors = 0;
+ int perf_err = 0;
+
+ skip_c0 = skip_c1 = 0;
+
+ for ( ; after && before && delta;
+ after = after->next, before = before->next, delta = delta->next) {
+ if (before->cpu != after->cpu) {
+ printf("cpu configuration changed: %d != %d\n",
+ before->cpu, after->cpu);
+ return -1;
+ }
+
+ if (SUBTRACT_COUNTER(after->tsc, before->tsc, delta->tsc)) {
+ fprintf(stderr, "cpu%d TSC went backwards %llX to %llX\n",
+ before->cpu, before->tsc, after->tsc);
+ errors++;
+ }
+ /* check for TSC < 1 Mcycles over interval */
+ if (delta->tsc < (1000 * 1000)) {
+ fprintf(stderr, "Insanely slow TSC rate,"
+ " TSC stops in idle?\n");
+ fprintf(stderr, "You can disable all c-states"
+ " by booting with \"idle=poll\"\n");
+ fprintf(stderr, "or just the deep ones with"
+ " \"processor.max_cstate=1\"\n");
+ exit(-3);
+ }
+ if (SUBTRACT_COUNTER(after->c3, before->c3, delta->c3)) {
+ fprintf(stderr, "cpu%d c3 counter went backwards %llX to %llX\n",
+ before->cpu, before->c3, after->c3);
+ errors++;
+ }
+ if (SUBTRACT_COUNTER(after->c6, before->c6, delta->c6)) {
+ fprintf(stderr, "cpu%d c6 counter went backwards %llX to %llX\n",
+ before->cpu, before->c6, after->c6);
+ errors++;
+ }
+ if (SUBTRACT_COUNTER(after->c7, before->c7, delta->c7)) {
+ fprintf(stderr, "cpu%d c7 counter went backwards %llX to %llX\n",
+ before->cpu, before->c7, after->c7);
+ errors++;
+ }
+ if (SUBTRACT_COUNTER(after->pc2, before->pc2, delta->pc2)) {
+ fprintf(stderr, "cpu%d pc2 counter went backwards %llX to %llX\n",
+ before->cpu, before->pc2, after->pc2);
+ errors++;
+ }
+ if (SUBTRACT_COUNTER(after->pc3, before->pc3, delta->pc3)) {
+ fprintf(stderr, "cpu%d pc3 counter went backwards %llX to %llX\n",
+ before->cpu, before->pc3, after->pc3);
+ errors++;
+ }
+ if (SUBTRACT_COUNTER(after->pc6, before->pc6, delta->pc6)) {
+ fprintf(stderr, "cpu%d pc6 counter went backwards %llX to %llX\n",
+ before->cpu, before->pc6, after->pc6);
+ errors++;
+ }
+ if (SUBTRACT_COUNTER(after->pc7, before->pc7, delta->pc7)) {
+ fprintf(stderr, "cpu%d pc7 counter went backwards %llX to %llX\n",
+ before->cpu, before->pc7, after->pc7);
+ errors++;
+ }
+
+ perf_err = SUBTRACT_COUNTER(after->aperf, before->aperf, delta->aperf);
+ if (perf_err) {
+ fprintf(stderr, "cpu%d aperf counter went backwards %llX to %llX\n",
+ before->cpu, before->aperf, after->aperf);
+ }
+ perf_err |= SUBTRACT_COUNTER(after->mperf, before->mperf, delta->mperf);
+ if (perf_err) {
+ fprintf(stderr, "cpu%d mperf counter went backwards %llX to %llX\n",
+ before->cpu, before->mperf, after->mperf);
+ }
+ if (perf_err) {
+ if (!aperf_mperf_unstable) {
+ fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
+ fprintf(stderr, "* Frequency results do not cover entire interval *\n");
+ fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
+
+ aperf_mperf_unstable = 1;
+ }
+ /*
+ * mperf delta is likely a huge "positive" number
+ * can not use it for calculating c0 time
+ */
+ skip_c0 = 1;
+ skip_c1 = 1;
+ }
+
+ /*
+ * As mperf and tsc collection are not atomic,
+ * it is possible for mperf's non-halted cycles
+ * to exceed TSC's all cycles: show c1 = 0% in that case.
+ */
+ if (delta->mperf > delta->tsc)
+ delta->c1 = 0;
+ else /* normal case, derive c1 */
+ delta->c1 = delta->tsc - delta->mperf
+ - delta->c3 - delta->c6 - delta->c7;
+
+ if (delta->mperf == 0)
+ delta->mperf = 1; /* divide by 0 protection */
+
+ /*
+ * for "extra msr", just copy the latest w/o subtracting
+ */
+ delta->extra_msr = after->extra_msr;
+ if (errors) {
+ fprintf(stderr, "ERROR cpu%d before:\n", before->cpu);
+ dump_pcc(before);
+ fprintf(stderr, "ERROR cpu%d after:\n", before->cpu);
+ dump_pcc(after);
+ errors = 0;
+ }
+ }
+ return 0;
+}
+
+void compute_average(PCC *delta, PCC *avg)
+{
+ PCC *sum;
+
+ sum = calloc(1, sizeof(PCC));
+ if (sum == NULL) {
+ perror("calloc sum");
+ exit(1);
+ }
+
+ for (; delta; delta = delta->next) {
+ sum->tsc += delta->tsc;
+ sum->c1 += delta->c1;
+ sum->c3 += delta->c3;
+ sum->c6 += delta->c6;
+ sum->c7 += delta->c7;
+ sum->aperf += delta->aperf;
+ sum->mperf += delta->mperf;
+ sum->pc2 += delta->pc2;
+ sum->pc3 += delta->pc3;
+ sum->pc6 += delta->pc6;
+ sum->pc7 += delta->pc7;
+ }
+ avg->tsc = sum->tsc/num_cpus;
+ avg->c1 = sum->c1/num_cpus;
+ avg->c3 = sum->c3/num_cpus;
+ avg->c6 = sum->c6/num_cpus;
+ avg->c7 = sum->c7/num_cpus;
+ avg->aperf = sum->aperf/num_cpus;
+ avg->mperf = sum->mperf/num_cpus;
+ avg->pc2 = sum->pc2/num_cpus;
+ avg->pc3 = sum->pc3/num_cpus;
+ avg->pc6 = sum->pc6/num_cpus;
+ avg->pc7 = sum->pc7/num_cpus;
+
+ free(sum);
+}
+
+void get_counters(PCC *pcc)
+{
+ for ( ; pcc; pcc = pcc->next) {
+ pcc->tsc = get_msr(pcc->cpu, MSR_TSC);
+ if (do_nhm_cstates)
+ pcc->c3 = get_msr(pcc->cpu, MSR_CORE_C3_RESIDENCY);
+ if (do_nhm_cstates)
+ pcc->c6 = get_msr(pcc->cpu, MSR_CORE_C6_RESIDENCY);
+ if (do_snb_cstates)
+ pcc->c7 = get_msr(pcc->cpu, MSR_CORE_C7_RESIDENCY);
+ if (has_aperf)
+ pcc->aperf = get_msr(pcc->cpu, MSR_APERF);
+ if (has_aperf)
+ pcc->mperf = get_msr(pcc->cpu, MSR_MPERF);
+ if (do_snb_cstates)
+ pcc->pc2 = get_msr(pcc->cpu, MSR_PKG_C2_RESIDENCY);
+ if (do_nhm_cstates)
+ pcc->pc3 = get_msr(pcc->cpu, MSR_PKG_C3_RESIDENCY);
+ if (do_nhm_cstates)
+ pcc->pc6 = get_msr(pcc->cpu, MSR_PKG_C6_RESIDENCY);
+ if (do_snb_cstates)
+ pcc->pc7 = get_msr(pcc->cpu, MSR_PKG_C7_RESIDENCY);
+ if (extra_msr_offset)
+ pcc->extra_msr = get_msr(pcc->cpu, extra_msr_offset);
+ }
+}
+
+
+void print_nehalem_info()
+{
+ unsigned long long msr;
+ unsigned int ratio;
+
+ if (!do_nehalem_platform_info)
+ return;
+
+ msr = get_msr(0, MSR_NEHALEM_PLATFORM_INFO);
+
+ ratio = (msr >> 40) & 0xFF;
+ fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency\n",
+ ratio, bclk, ratio * bclk);
+
+ ratio = (msr >> 8) & 0xFF;
+ fprintf(stderr, "%d * %.0f = %.0f MHz TSC frequency\n",
+ ratio, bclk, ratio * bclk);
+
+ if (verbose > 1)
+ fprintf(stderr, "MSR_NEHALEM_PLATFORM_INFO: 0x%llx\n", msr);
+
+ if (!do_nehalem_turbo_ratio_limit)
+ return;
+
+ msr = get_msr(0, MSR_NEHALEM_TURBO_RATIO_LIMIT);
+
+ ratio = (msr >> 24) & 0xFF;
+ if (ratio)
+ fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 4 active cores\n",
+ ratio, bclk, ratio * bclk);
+
+ ratio = (msr >> 16) & 0xFF;
+ if (ratio)
+ fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 3 active cores\n",
+ ratio, bclk, ratio * bclk);
+
+ ratio = (msr >> 8) & 0xFF;
+ if (ratio)
+ fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 2 active cores\n",
+ ratio, bclk, ratio * bclk);
+
+ ratio = (msr >> 0) & 0xFF;
+ if (ratio)
+ fprintf(stderr, "%d * %.0f = %.0f MHz max turbo 1 active cores\n",
+ ratio, bclk, ratio * bclk);
+
+}
+
+void free_counter_list(PCC *list)
+{
+ PCC *p;
+
+ for (p = list; p; ) {
+ PCC *free_me;
+
+ free_me = p;
+ p = p->next;
+ free(free_me);
+ }
+ return;
+}
+
+void free_all_counters(void)
+{
+ free_counter_list(pcc_even);
+ pcc_even = NULL;
+
+ free_counter_list(pcc_odd);
+ pcc_odd = NULL;
+
+ free_counter_list(pcc_delta);
+ pcc_delta = NULL;
+
+ free_counter_list(pcc_average);
+ pcc_average = NULL;
+}
+
+void insert_cpu_counters(PCC **list, PCC *new)
+{
+ PCC *prev;
+
+ /*
+ * list was empty
+ */
+ if (*list == NULL) {
+ new->next = *list;
+ *list = new;
+ return;
+ }
+
+ show_cpu = 1; /* there is more than one CPU */
+
+ /*
+ * insert on front of list.
+ * It is sorted by ascending package#, core#, cpu#
+ */
+ if (((*list)->pkg > new->pkg) ||
+ (((*list)->pkg == new->pkg) && ((*list)->core > new->core)) ||
+ (((*list)->pkg == new->pkg) && ((*list)->core == new->core) && ((*list)->cpu > new->cpu))) {
+ new->next = *list;
+ *list = new;
+ return;
+ }
+
+ prev = *list;
+
+ while (prev->next && (prev->next->pkg < new->pkg)) {
+ prev = prev->next;
+ show_pkg = 1; /* there is more than 1 package */
+ }
+
+ while (prev->next && (prev->next->pkg == new->pkg)
+ && (prev->next->core < new->core)) {
+ prev = prev->next;
+ show_core = 1; /* there is more than 1 core */
+ }
+
+ while (prev->next && (prev->next->pkg == new->pkg)
+ && (prev->next->core == new->core)
+ && (prev->next->cpu < new->cpu)) {
+ prev = prev->next;
+ }
+
+ /*
+ * insert after "prev"
+ */
+ new->next = prev->next;
+ prev->next = new;
+
+ return;
+}
+
+void alloc_new_cpu_counters(int pkg, int core, int cpu)
+{
+ PCC *new;
+
+ if (verbose > 1)
+ printf("pkg%d core%d, cpu%d\n", pkg, core, cpu);
+
+ new = (PCC *)calloc(1, sizeof(PCC));
+ if (new == NULL) {
+ perror("calloc");
+ exit(1);
+ }
+ new->pkg = pkg;
+ new->core = core;
+ new->cpu = cpu;
+ insert_cpu_counters(&pcc_odd, new);
+
+ new = (PCC *)calloc(1, sizeof(PCC));
+ if (new == NULL) {
+ perror("calloc");
+ exit(1);
+ }
+ new->pkg = pkg;
+ new->core = core;
+ new->cpu = cpu;
+ insert_cpu_counters(&pcc_even, new);
+
+ new = (PCC *)calloc(1, sizeof(PCC));
+ if (new == NULL) {
+ perror("calloc");
+ exit(1);
+ }
+ new->pkg = pkg;
+ new->core = core;
+ new->cpu = cpu;
+ insert_cpu_counters(&pcc_delta, new);
+
+ new = (PCC *)calloc(1, sizeof(PCC));
+ if (new == NULL) {
+ perror("calloc");
+ exit(1);
+ }
+ new->pkg = pkg;
+ new->core = core;
+ new->cpu = cpu;
+ pcc_average = new;
+}
+
+int get_physical_package_id(int cpu)
+{
+ char path[64];
+ FILE *filep;
+ int pkg;
+
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
+ }
+ fscanf(filep, "%d", &pkg);
+ fclose(filep);
+ return pkg;
+}
+
+int get_core_id(int cpu)
+{
+ char path[64];
+ FILE *filep;
+ int core;
+
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/core_id", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
+ }
+ fscanf(filep, "%d", &core);
+ fclose(filep);
+ return core;
+}
+
+/*
+ * run func(index, cpu) on every cpu in /proc/stat
+ */
+
+int for_all_cpus(void (func)(int, int, int))
+{
+ FILE *fp;
+ int cpu_count;
+ int retval;
+
+ fp = fopen(proc_stat, "r");
+ if (fp == NULL) {
+ perror(proc_stat);
+ exit(1);
+ }
+
+ retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n");
+ if (retval != 0) {
+ perror("/proc/stat format");
+ exit(1);
+ }
+
+ for (cpu_count = 0; ; cpu_count++) {
+ int cpu;
+
+ retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu);
+ if (retval != 1)
+ break;
+
+ func(get_physical_package_id(cpu), get_core_id(cpu), cpu);
+ }
+ fclose(fp);
+ return cpu_count;
+}
+
+void re_initialize(void)
+{
+ printf("turbostat: topology changed, re-initializing.\n");
+ free_all_counters();
+ num_cpus = for_all_cpus(alloc_new_cpu_counters);
+ need_reinitialize = 0;
+ printf("num_cpus is now %d\n", num_cpus);
+}
+
+void dummy(int pkg, int core, int cpu) { return; }
+/*
+ * check to see if a cpu came on-line
+ */
+void verify_num_cpus()
+{
+ int new_num_cpus;
+
+ new_num_cpus = for_all_cpus(dummy);
+
+ if (new_num_cpus != num_cpus) {
+ if (verbose)
+ printf("num_cpus was %d, is now %d\n",
+ num_cpus, new_num_cpus);
+ need_reinitialize = 1;
+ }
+
+ return;
+}
+
+void turbostat_loop()
+{
+restart:
+ get_counters(pcc_even);
+ gettimeofday(&tv_even, (struct timezone *)NULL);
+
+ while (1) {
+ verify_num_cpus();
+ if (need_reinitialize) {
+ re_initialize();
+ goto restart;
+ }
+ sleep(interval_sec);
+ get_counters(pcc_odd);
+ gettimeofday(&tv_odd, (struct timezone *)NULL);
+
+ compute_delta(pcc_odd, pcc_even, pcc_delta);
+ timersub(&tv_odd, &tv_even, &tv_delta);
+ compute_average(pcc_delta, pcc_average);
+ print_counters(pcc_delta);
+ if (need_reinitialize) {
+ re_initialize();
+ goto restart;
+ }
+ sleep(interval_sec);
+ get_counters(pcc_even);
+ gettimeofday(&tv_even, (struct timezone *)NULL);
+ compute_delta(pcc_even, pcc_odd, pcc_delta);
+ timersub(&tv_even, &tv_odd, &tv_delta);
+ compute_average(pcc_delta, pcc_average);
+ print_counters(pcc_delta);
+ }
+}
+
+void check_dev_msr()
+{
+ struct stat sb;
+
+ if (stat("/dev/cpu/0/msr", &sb)) {
+ fprintf(stderr, "no /dev/cpu/0/msr\n");
+ fprintf(stderr, "Try \"# modprobe msr\"\n");
+ exit(-5);
+ }
+}
+
+void check_super_user()
+{
+ if (getuid() != 0) {
+ fprintf(stderr, "must be root\n");
+ exit(-6);
+ }
+}
+
+int has_nehalem_turbo_ratio_limit(unsigned int family, unsigned int model)
+{
+ if (!genuine_intel)
+ return 0;
+
+ if (family != 6)
+ return 0;
+
+ switch (model) {
+ case 0x1A: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */
+ case 0x1E: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */
+ case 0x1F: /* Core i7 and i5 Processor - Nehalem */
+ case 0x25: /* Westmere Client - Clarkdale, Arrandale */
+ case 0x2C: /* Westmere EP - Gulftown */
+ case 0x2A: /* SNB */
+ case 0x2D: /* SNB Xeon */
+ return 1;
+ case 0x2E: /* Nehalem-EX Xeon - Beckton */
+ case 0x2F: /* Westmere-EX Xeon - Eagleton */
+ default:
+ return 0;
+ }
+}
+
+int is_snb(unsigned int family, unsigned int model)
+{
+ if (!genuine_intel)
+ return 0;
+
+ switch (model) {
+ case 0x2A:
+ case 0x2D:
+ return 1;
+ }
+ return 0;
+}
+
+double discover_bclk(unsigned int family, unsigned int model)
+{
+ if (is_snb(family, model))
+ return 100.00;
+ else
+ return 133.33;
+}
+
+void check_cpuid()
+{
+ unsigned int eax, ebx, ecx, edx, max_level;
+ unsigned int fms, family, model, stepping;
+
+ eax = ebx = ecx = edx = 0;
+
+ asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0));
+
+ if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
+ genuine_intel = 1;
+
+ if (verbose)
+ fprintf(stderr, "%.4s%.4s%.4s ",
+ (char *)&ebx, (char *)&edx, (char *)&ecx);
+
+ asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
+ family = (fms >> 8) & 0xf;
+ model = (fms >> 4) & 0xf;
+ stepping = fms & 0xf;
+ if (family == 6 || family == 0xf)
+ model += ((fms >> 16) & 0xf) << 4;
+
+ if (verbose)
+ fprintf(stderr, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n",
+ max_level, family, model, stepping, family, model, stepping);
+
+ if (!(edx & (1 << 5))) {
+ fprintf(stderr, "CPUID: no MSR\n");
+ exit(1);
+ }
+
+ /*
+ * check max extended function levels of CPUID.
+ * This is needed to check for invariant TSC.
+ * This check is valid for both Intel and AMD.
+ */
+ ebx = ecx = edx = 0;
+ asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x80000000));
+
+ if (max_level < 0x80000007) {
+ fprintf(stderr, "CPUID: no invariant TSC (max_level 0x%x)\n", max_level);
+ exit(1);
+ }
+
+ /*
+ * Non-Stop TSC is advertised by CPUID.EAX=0x80000007: EDX.bit8
+ * this check is valid for both Intel and AMD
+ */
+ asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x80000007));
+ has_invariant_tsc = edx && (1 << 8);
+
+ if (!has_invariant_tsc) {
+ fprintf(stderr, "No invariant TSC\n");
+ exit(1);
+ }
+
+ /*
+ * APERF/MPERF is advertised by CPUID.EAX=0x6: ECX.bit0
+ * this check is valid for both Intel and AMD
+ */
+
+ asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x6));
+ has_aperf = ecx && (1 << 0);
+ if (!has_aperf) {
+ fprintf(stderr, "No APERF MSR\n");
+ exit(1);
+ }
+
+ do_nehalem_platform_info = genuine_intel && has_invariant_tsc;
+ do_nhm_cstates = genuine_intel; /* all Intel w/ non-stop TSC have NHM counters */
+ do_snb_cstates = is_snb(family, model);
+ bclk = discover_bclk(family, model);
+
+ do_nehalem_turbo_ratio_limit = has_nehalem_turbo_ratio_limit(family, model);
+}
+
+
+void usage()
+{
+ fprintf(stderr, "%s: [-v] [-M MSR#] [-i interval_sec | command ...]\n",
+ progname);
+ exit(1);
+}
+
+
+/*
+ * in /dev/cpu/ return success for names that are numbers
+ * ie. filter out ".", "..", "microcode".
+ */
+int dir_filter(const struct dirent *dirp)
+{
+ if (isdigit(dirp->d_name[0]))
+ return 1;
+ else
+ return 0;
+}
+
+int open_dev_cpu_msr(int dummy1)
+{
+ return 0;
+}
+
+void turbostat_init()
+{
+ check_cpuid();
+
+ check_dev_msr();
+ check_super_user();
+
+ num_cpus = for_all_cpus(alloc_new_cpu_counters);
+
+ if (verbose)
+ print_nehalem_info();
+}
+
+int fork_it(char **argv)
+{
+ int retval;
+ pid_t child_pid;
+ get_counters(pcc_even);
+ gettimeofday(&tv_even, (struct timezone *)NULL);
+
+ child_pid = fork();
+ if (!child_pid) {
+ /* child */
+ execvp(argv[0], argv);
+ } else {
+ int status;
+
+ /* parent */
+ if (child_pid == -1) {
+ perror("fork");
+ exit(1);
+ }
+
+ signal(SIGINT, SIG_IGN);
+ signal(SIGQUIT, SIG_IGN);
+ if (waitpid(child_pid, &status, 0) == -1) {
+ perror("wait");
+ exit(1);
+ }
+ }
+ get_counters(pcc_odd);
+ gettimeofday(&tv_odd, (struct timezone *)NULL);
+ retval = compute_delta(pcc_odd, pcc_even, pcc_delta);
+
+ timersub(&tv_odd, &tv_even, &tv_delta);
+ compute_average(pcc_delta, pcc_average);
+ if (!retval)
+ print_counters(pcc_delta);
+
+ fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);;
+
+ return 0;
+}
+
+void cmdline(int argc, char **argv)
+{
+ int opt;
+
+ progname = argv[0];
+
+ while ((opt = getopt(argc, argv, "+vi:M:")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose++;
+ break;
+ case 'i':
+ interval_sec = atoi(optarg);
+ break;
+ case 'M':
+ sscanf(optarg, "%x", &extra_msr_offset);
+ if (verbose > 1)
+ fprintf(stderr, "MSR 0x%X\n", extra_msr_offset);
+ break;
+ default:
+ usage();
+ }
+ }
+}
+
+int main(int argc, char **argv)
+{
+ cmdline(argc, argv);
+
+ if (verbose > 1)
+ fprintf(stderr, "turbostat Dec 6, 2010"
+ " - Len Brown <lenb@kernel.org>\n");
+ if (verbose > 1)
+ fprintf(stderr, "http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/\n");
+
+ turbostat_init();
+
+ /*
+ * if any params left, it must be a command to fork
+ */
+ if (argc - optind)
+ return fork_it(argv + optind);
+ else
+ turbostat_loop();
+
+ return 0;
+}
diff --git a/tools/power/x86/x86_energy_perf_policy/Makefile b/tools/power/x86/x86_energy_perf_policy/Makefile
new file mode 100644
index 0000000..f458237
--- /dev/null
+++ b/tools/power/x86/x86_energy_perf_policy/Makefile
@@ -0,0 +1,8 @@
+x86_energy_perf_policy : x86_energy_perf_policy.c
+
+clean :
+ rm -f x86_energy_perf_policy
+
+install :
+ install x86_energy_perf_policy /usr/bin/
+ install x86_energy_perf_policy.8 /usr/share/man/man8/
diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8
new file mode 100644
index 0000000..8eaaad6
--- /dev/null
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8
@@ -0,0 +1,104 @@
+.\" This page Copyright (C) 2010 Len Brown <len.brown@intel.com>
+.\" Distributed under the GPL, Copyleft 1994.
+.TH X86_ENERGY_PERF_POLICY 8
+.SH NAME
+x86_energy_perf_policy \- read or write MSR_IA32_ENERGY_PERF_BIAS
+.SH SYNOPSIS
+.ft B
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB "\-r"
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB 'performance'
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB 'normal'
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB 'powersave'
+.br
+.B x86_energy_perf_policy
+.RB [ "\-c cpu" ]
+.RB [ "\-v" ]
+.RB n
+.br
+.SH DESCRIPTION
+\fBx86_energy_perf_policy\fP
+allows software to convey
+its policy for the relative importance of performance
+versus energy savings to the processor.
+
+The processor uses this information in model-specific ways
+when it must select trade-offs between performance and
+energy efficiency.
+
+This policy hint does not supersede Processor Performance states
+(P-states) or CPU Idle power states (C-states), but allows
+software to have influence where it would otherwise be unable
+to express a preference.
+
+For example, this setting may tell the hardware how
+aggressively or conservatively to control frequency
+in the "turbo range" above the explicitly OS-controlled
+P-state frequency range. It may also tell the hardware
+how aggressively is should enter the OS requested C-states.
+
+Support for this feature is indicated by CPUID.06H.ECX.bit3
+per the Intel Architectures Software Developer's Manual.
+
+.SS Options
+\fB-c\fP limits operation to a single CPU.
+The default is to operate on all CPUs.
+Note that MSR_IA32_ENERGY_PERF_BIAS is defined per
+logical processor, but that the initial implementations
+of the MSR were shared among all processors in each package.
+.PP
+\fB-v\fP increases verbosity. By default
+x86_energy_perf_policy is silent.
+.PP
+\fB-r\fP is for "read-only" mode - the unchanged state
+is read and displayed.
+.PP
+.I performance
+Set a policy where performance is paramount.
+The processor will be unwilling to sacrifice any performance
+for the sake of energy saving. This is the hardware default.
+.PP
+.I normal
+Set a policy with a normal balance between performance and energy efficiency.
+The processor will tolerate minor performance compromise
+for potentially significant energy savings.
+This reasonable default for most desktops and servers.
+.PP
+.I powersave
+Set a policy where the processor can accept
+a measurable performance hit to maximize energy efficiency.
+.PP
+.I n
+Set MSR_IA32_ENERGY_PERF_BIAS to the specified number.
+The range of valid numbers is 0-15, where 0 is maximum
+performance and 15 is maximum energy efficiency.
+
+.SH NOTES
+.B "x86_energy_perf_policy "
+runs only as root.
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+.fi
+
+.SH "SEE ALSO"
+msr(4)
+.PP
+.SH AUTHORS
+.nf
+Written by Len Brown <len.brown@intel.com>
diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
new file mode 100644
index 0000000..d9678a3
--- /dev/null
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -0,0 +1,325 @@
+/*
+ * x86_energy_perf_policy -- set the energy versus performance
+ * policy preference bias on recent X86 processors.
+ */
+/*
+ * Copyright (c) 2010, Intel Corporation.
+ * Len Brown <len.brown@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/resource.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <sys/time.h>
+#include <stdlib.h>
+#include <string.h>
+
+unsigned int verbose; /* set with -v */
+unsigned int read_only; /* set with -r */
+char *progname;
+unsigned long long new_bias;
+int cpu = -1;
+
+/*
+ * Usage:
+ *
+ * -c cpu: limit action to a single CPU (default is all CPUs)
+ * -v: verbose output (can invoke more than once)
+ * -r: read-only, don't change any settings
+ *
+ * performance
+ * Performance is paramount.
+ * Unwilling to sacrafice any performance
+ * for the sake of energy saving. (hardware default)
+ *
+ * normal
+ * Can tolerate minor performance compromise
+ * for potentially significant energy savings.
+ * (reasonable default for most desktops and servers)
+ *
+ * powersave
+ * Can tolerate significant performance hit
+ * to maximize energy savings.
+ *
+ * n
+ * a numerical value to write to the underlying MSR.
+ */
+void usage(void)
+{
+ printf("%s: [-c cpu] [-v] "
+ "(-r | 'performance' | 'normal' | 'powersave' | n)\n",
+ progname);
+ exit(1);
+}
+
+#define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0
+
+#define BIAS_PERFORMANCE 0
+#define BIAS_BALANCE 6
+#define BIAS_POWERSAVE 15
+
+void cmdline(int argc, char **argv)
+{
+ int opt;
+
+ progname = argv[0];
+
+ while ((opt = getopt(argc, argv, "+rvc:")) != -1) {
+ switch (opt) {
+ case 'c':
+ cpu = atoi(optarg);
+ break;
+ case 'r':
+ read_only = 1;
+ break;
+ case 'v':
+ verbose++;
+ break;
+ default:
+ usage();
+ }
+ }
+ /* if -r, then should be no additional optind */
+ if (read_only && (argc > optind))
+ usage();
+
+ /*
+ * if no -r , then must be one additional optind
+ */
+ if (!read_only) {
+
+ if (argc != optind + 1) {
+ printf("must supply -r or policy param\n");
+ usage();
+ }
+
+ if (!strcmp("performance", argv[optind])) {
+ new_bias = BIAS_PERFORMANCE;
+ } else if (!strcmp("normal", argv[optind])) {
+ new_bias = BIAS_BALANCE;
+ } else if (!strcmp("powersave", argv[optind])) {
+ new_bias = BIAS_POWERSAVE;
+ } else {
+ char *endptr;
+
+ new_bias = strtoull(argv[optind], &endptr, 0);
+ if (endptr == argv[optind] ||
+ new_bias > BIAS_POWERSAVE) {
+ fprintf(stderr, "invalid value: %s\n",
+ argv[optind]);
+ usage();
+ }
+ }
+ }
+}
+
+/*
+ * validate_cpuid()
+ * returns on success, quietly exits on failure (make verbose with -v)
+ */
+void validate_cpuid(void)
+{
+ unsigned int eax, ebx, ecx, edx, max_level;
+ char brand[16];
+ unsigned int fms, family, model, stepping;
+
+ eax = ebx = ecx = edx = 0;
+
+ asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx),
+ "=d" (edx) : "a" (0));
+
+ if (ebx != 0x756e6547 || edx != 0x49656e69 || ecx != 0x6c65746e) {
+ if (verbose)
+ fprintf(stderr, "%.4s%.4s%.4s != GenuineIntel",
+ (char *)&ebx, (char *)&edx, (char *)&ecx);
+ exit(1);
+ }
+
+ asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
+ family = (fms >> 8) & 0xf;
+ model = (fms >> 4) & 0xf;
+ stepping = fms & 0xf;
+ if (family == 6 || family == 0xf)
+ model += ((fms >> 16) & 0xf) << 4;
+
+ if (verbose > 1)
+ printf("CPUID %s %d levels family:model:stepping "
+ "0x%x:%x:%x (%d:%d:%d)\n", brand, max_level,
+ family, model, stepping, family, model, stepping);
+
+ if (!(edx & (1 << 5))) {
+ if (verbose)
+ printf("CPUID: no MSR\n");
+ exit(1);
+ }
+
+ /*
+ * Support for MSR_IA32_ENERGY_PERF_BIAS
+ * is indicated by CPUID.06H.ECX.bit3
+ */
+ asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (6));
+ if (verbose)
+ printf("CPUID.06H.ECX: 0x%x\n", ecx);
+ if (!(ecx & (1 << 3))) {
+ if (verbose)
+ printf("CPUID: No MSR_IA32_ENERGY_PERF_BIAS\n");
+ exit(1);
+ }
+ return; /* success */
+}
+
+unsigned long long get_msr(int cpu, int offset)
+{
+ unsigned long long msr;
+ char msr_path[32];
+ int retval;
+ int fd;
+
+ sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
+ fd = open(msr_path, O_RDONLY);
+ if (fd < 0) {
+ printf("Try \"# modprobe msr\"\n");
+ perror(msr_path);
+ exit(1);
+ }
+
+ retval = pread(fd, &msr, sizeof msr, offset);
+
+ if (retval != sizeof msr) {
+ printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
+ exit(-2);
+ }
+ close(fd);
+ return msr;
+}
+
+unsigned long long put_msr(int cpu, unsigned long long new_msr, int offset)
+{
+ unsigned long long old_msr;
+ char msr_path[32];
+ int retval;
+ int fd;
+
+ sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
+ fd = open(msr_path, O_RDWR);
+ if (fd < 0) {
+ perror(msr_path);
+ exit(1);
+ }
+
+ retval = pread(fd, &old_msr, sizeof old_msr, offset);
+ if (retval != sizeof old_msr) {
+ perror("pwrite");
+ printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
+ exit(-2);
+ }
+
+ retval = pwrite(fd, &new_msr, sizeof new_msr, offset);
+ if (retval != sizeof new_msr) {
+ perror("pwrite");
+ printf("pwrite cpu%d 0x%x = %d\n", cpu, offset, retval);
+ exit(-2);
+ }
+
+ close(fd);
+
+ return old_msr;
+}
+
+void print_msr(int cpu)
+{
+ printf("cpu%d: 0x%016llx\n",
+ cpu, get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS));
+}
+
+void update_msr(int cpu)
+{
+ unsigned long long previous_msr;
+
+ previous_msr = put_msr(cpu, new_bias, MSR_IA32_ENERGY_PERF_BIAS);
+
+ if (verbose)
+ printf("cpu%d msr0x%x 0x%016llx -> 0x%016llx\n",
+ cpu, MSR_IA32_ENERGY_PERF_BIAS, previous_msr, new_bias);
+
+ return;
+}
+
+char *proc_stat = "/proc/stat";
+/*
+ * run func() on every cpu in /dev/cpu
+ */
+void for_every_cpu(void (func)(int))
+{
+ FILE *fp;
+ int retval;
+
+ fp = fopen(proc_stat, "r");
+ if (fp == NULL) {
+ perror(proc_stat);
+ exit(1);
+ }
+
+ retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n");
+ if (retval != 0) {
+ perror("/proc/stat format");
+ exit(1);
+ }
+
+ while (1) {
+ int cpu;
+
+ retval = fscanf(fp,
+ "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n",
+ &cpu);
+ if (retval != 1)
+ return;
+
+ func(cpu);
+ }
+ fclose(fp);
+}
+
+int main(int argc, char **argv)
+{
+ cmdline(argc, argv);
+
+ if (verbose > 1)
+ printf("x86_energy_perf_policy Nov 24, 2010"
+ " - Len Brown <lenb@kernel.org>\n");
+ if (verbose > 1 && !read_only)
+ printf("new_bias %lld\n", new_bias);
+
+ validate_cpuid();
+
+ if (cpu != -1) {
+ if (read_only)
+ print_msr(cpu);
+ else
+ update_msr(cpu);
+ } else {
+ if (read_only)
+ for_every_cpu(print_msr);
+ else
+ for_every_cpu(update_msr);
+ }
+
+ return 0;
+}
diff --git a/tools/testing/ktest/compare-ktest-sample.pl b/tools/testing/ktest/compare-ktest-sample.pl
new file mode 100755
index 0000000..9a571e7
--- /dev/null
+++ b/tools/testing/ktest/compare-ktest-sample.pl
@@ -0,0 +1,30 @@
+#!/usr/bin/perl
+
+open (IN,"ktest.pl");
+while (<IN>) {
+ if (/\$opt\{"?([A-Z].*?)(\[.*\])?"?\}/ ||
+ /set_test_option\("(.*?)"/) {
+ $opt{$1} = 1;
+ }
+}
+close IN;
+
+open (IN, "sample.conf");
+while (<IN>) {
+ if (/^\s*#?\s*(\S+)\s*=/) {
+ $samp{$1} = 1;
+ }
+}
+close IN;
+
+foreach $opt (keys %opt) {
+ if (!defined($samp{$opt})) {
+ print "opt = $opt\n";
+ }
+}
+
+foreach $samp (keys %samp) {
+ if (!defined($opt{$samp})) {
+ print "samp = $samp\n";
+ }
+}
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
new file mode 100755
index 0000000..e1c62ee
--- /dev/null
+++ b/tools/testing/ktest/ktest.pl
@@ -0,0 +1,2023 @@
+#!/usr/bin/perl -w
+#
+# Copywrite 2010 - Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
+# Licensed under the terms of the GNU GPL License version 2
+#
+
+use strict;
+use IPC::Open2;
+use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
+use File::Path qw(mkpath);
+use File::Copy qw(cp);
+use FileHandle;
+
+my $VERSION = "0.2";
+
+$| = 1;
+
+my %opt;
+my %repeat_tests;
+my %repeats;
+my %default;
+
+#default opts
+$default{"NUM_TESTS"} = 1;
+$default{"REBOOT_TYPE"} = "grub";
+$default{"TEST_TYPE"} = "test";
+$default{"BUILD_TYPE"} = "randconfig";
+$default{"MAKE_CMD"} = "make";
+$default{"TIMEOUT"} = 120;
+$default{"TMP_DIR"} = "/tmp/ktest";
+$default{"SLEEP_TIME"} = 60; # sleep time between tests
+$default{"BUILD_NOCLEAN"} = 0;
+$default{"REBOOT_ON_ERROR"} = 0;
+$default{"POWEROFF_ON_ERROR"} = 0;
+$default{"REBOOT_ON_SUCCESS"} = 1;
+$default{"POWEROFF_ON_SUCCESS"} = 0;
+$default{"BUILD_OPTIONS"} = "";
+$default{"BISECT_SLEEP_TIME"} = 60; # sleep time between bisects
+$default{"CLEAR_LOG"} = 0;
+$default{"SUCCESS_LINE"} = "login:";
+$default{"BOOTED_TIMEOUT"} = 1;
+$default{"DIE_ON_FAILURE"} = 1;
+$default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
+$default{"SCP_TO_TARGET"} = "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE";
+$default{"REBOOT"} = "ssh \$SSH_USER\@\$MACHINE reboot";
+$default{"STOP_AFTER_SUCCESS"} = 10;
+$default{"STOP_AFTER_FAILURE"} = 60;
+$default{"LOCALVERSION"} = "-test";
+
+my $ktest_config;
+my $version;
+my $machine;
+my $ssh_user;
+my $tmpdir;
+my $builddir;
+my $outputdir;
+my $output_config;
+my $test_type;
+my $build_type;
+my $build_options;
+my $reboot_type;
+my $reboot_script;
+my $power_cycle;
+my $reboot;
+my $reboot_on_error;
+my $poweroff_on_error;
+my $die_on_failure;
+my $powercycle_after_reboot;
+my $poweroff_after_halt;
+my $ssh_exec;
+my $scp_to_target;
+my $power_off;
+my $grub_menu;
+my $grub_number;
+my $target;
+my $make;
+my $post_install;
+my $noclean;
+my $minconfig;
+my $addconfig;
+my $in_bisect = 0;
+my $bisect_bad = "";
+my $reverse_bisect;
+my $in_patchcheck = 0;
+my $run_test;
+my $redirect;
+my $buildlog;
+my $dmesg;
+my $monitor_fp;
+my $monitor_pid;
+my $monitor_cnt = 0;
+my $sleep_time;
+my $bisect_sleep_time;
+my $store_failures;
+my $timeout;
+my $booted_timeout;
+my $console;
+my $success_line;
+my $stop_after_success;
+my $stop_after_failure;
+my $build_target;
+my $target_image;
+my $localversion;
+my $iteration = 0;
+my $successes = 0;
+
+my %entered_configs;
+my %config_help;
+
+$config_help{"MACHINE"} = << "EOF"
+ The machine hostname that you will test.
+EOF
+ ;
+$config_help{"SSH_USER"} = << "EOF"
+ The box is expected to have ssh on normal bootup, provide the user
+ (most likely root, since you need privileged operations)
+EOF
+ ;
+$config_help{"BUILD_DIR"} = << "EOF"
+ The directory that contains the Linux source code (full path).
+EOF
+ ;
+$config_help{"OUTPUT_DIR"} = << "EOF"
+ The directory that the objects will be built (full path).
+ (can not be same as BUILD_DIR)
+EOF
+ ;
+$config_help{"BUILD_TARGET"} = << "EOF"
+ The location of the compiled file to copy to the target.
+ (relative to OUTPUT_DIR)
+EOF
+ ;
+$config_help{"TARGET_IMAGE"} = << "EOF"
+ The place to put your image on the test machine.
+EOF
+ ;
+$config_help{"POWER_CYCLE"} = << "EOF"
+ A script or command to reboot the box.
+
+ Here is a digital loggers power switch example
+ POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin\@power/outlet?5=CCL'
+
+ Here is an example to reboot a virtual box on the current host
+ with the name "Guest".
+ POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+EOF
+ ;
+$config_help{"CONSOLE"} = << "EOF"
+ The script or command that reads the console
+
+ If you use ttywatch server, something like the following would work.
+CONSOLE = nc -d localhost 3001
+
+ For a virtual machine with guest name "Guest".
+CONSOLE = virsh console Guest
+EOF
+ ;
+$config_help{"LOCALVERSION"} = << "EOF"
+ Required version ending to differentiate the test
+ from other linux builds on the system.
+EOF
+ ;
+$config_help{"REBOOT_TYPE"} = << "EOF"
+ Way to reboot the box to the test kernel.
+ Only valid options so far are "grub" and "script".
+
+ If you specify grub, it will assume grub version 1
+ and will search in /boot/grub/menu.lst for the title \$GRUB_MENU
+ and select that target to reboot to the kernel. If this is not
+ your setup, then specify "script" and have a command or script
+ specified in REBOOT_SCRIPT to boot to the target.
+
+ The entry in /boot/grub/menu.lst must be entered in manually.
+ The test will not modify that file.
+EOF
+ ;
+$config_help{"GRUB_MENU"} = << "EOF"
+ The grub title name for the test kernel to boot
+ (Only mandatory if REBOOT_TYPE = grub)
+
+ Note, ktest.pl will not update the grub menu.lst, you need to
+ manually add an option for the test. ktest.pl will search
+ the grub menu.lst for this option to find what kernel to
+ reboot into.
+
+ For example, if in the /boot/grub/menu.lst the test kernel title has:
+ title Test Kernel
+ kernel vmlinuz-test
+ GRUB_MENU = Test Kernel
+EOF
+ ;
+$config_help{"REBOOT_SCRIPT"} = << "EOF"
+ A script to reboot the target into the test kernel
+ (Only mandatory if REBOOT_TYPE = script)
+EOF
+ ;
+
+
+sub get_ktest_config {
+ my ($config) = @_;
+
+ return if (defined($opt{$config}));
+
+ if (defined($config_help{$config})) {
+ print "\n";
+ print $config_help{$config};
+ }
+
+ for (;;) {
+ print "$config = ";
+ if (defined($default{$config})) {
+ print "\[$default{$config}\] ";
+ }
+ $entered_configs{$config} = <STDIN>;
+ $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
+ if ($entered_configs{$config} =~ /^\s*$/) {
+ if ($default{$config}) {
+ $entered_configs{$config} = $default{$config};
+ } else {
+ print "Your answer can not be blank\n";
+ next;
+ }
+ }
+ last;
+ }
+}
+
+sub get_ktest_configs {
+ get_ktest_config("MACHINE");
+ get_ktest_config("SSH_USER");
+ get_ktest_config("BUILD_DIR");
+ get_ktest_config("OUTPUT_DIR");
+ get_ktest_config("BUILD_TARGET");
+ get_ktest_config("TARGET_IMAGE");
+ get_ktest_config("POWER_CYCLE");
+ get_ktest_config("CONSOLE");
+ get_ktest_config("LOCALVERSION");
+
+ my $rtype = $opt{"REBOOT_TYPE"};
+
+ if (!defined($rtype)) {
+ if (!defined($opt{"GRUB_MENU"})) {
+ get_ktest_config("REBOOT_TYPE");
+ $rtype = $entered_configs{"REBOOT_TYPE"};
+ } else {
+ $rtype = "grub";
+ }
+ }
+
+ if ($rtype eq "grub") {
+ get_ktest_config("GRUB_MENU");
+ } else {
+ get_ktest_config("REBOOT_SCRIPT");
+ }
+}
+
+sub set_value {
+ my ($lvalue, $rvalue) = @_;
+
+ if (defined($opt{$lvalue})) {
+ die "Error: Option $lvalue defined more than once!\n";
+ }
+ if ($rvalue =~ /^\s*$/) {
+ delete $opt{$lvalue};
+ } else {
+ $opt{$lvalue} = $rvalue;
+ }
+}
+
+sub read_config {
+ my ($config) = @_;
+
+ open(IN, $config) || die "can't read file $config";
+
+ my $name = $config;
+ $name =~ s,.*/(.*),$1,;
+
+ my $test_num = 0;
+ my $default = 1;
+ my $repeat = 1;
+ my $num_tests_set = 0;
+ my $skip = 0;
+ my $rest;
+
+ while (<IN>) {
+
+ # ignore blank lines and comments
+ next if (/^\s*$/ || /\s*\#/);
+
+ if (/^\s*TEST_START(.*)/) {
+
+ $rest = $1;
+
+ if ($num_tests_set) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
+
+ my $old_test_num = $test_num;
+ my $old_repeat = $repeat;
+
+ $test_num += $repeat;
+ $default = 0;
+ $repeat = 1;
+
+ if ($rest =~ /\s+SKIP(.*)/) {
+ $rest = $1;
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
+
+ if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
+ $repeat = $1;
+ $rest = $2;
+ $repeat_tests{"$test_num"} = $repeat;
+ }
+
+ if ($rest =~ /\s+SKIP(.*)/) {
+ $rest = $1;
+ $skip = 1;
+ }
+
+ if ($rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after TEST_START\n$_";
+ }
+
+ if ($skip) {
+ $test_num = $old_test_num;
+ $repeat = $old_repeat;
+ }
+
+ } elsif (/^\s*DEFAULTS(.*)$/) {
+ $default = 1;
+
+ $rest = $1;
+
+ if ($rest =~ /\s+SKIP(.*)/) {
+ $rest = $1;
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
+
+ if ($rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after DEFAULTS\n$_";
+ }
+
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
+
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ if (!$default &&
+ ($lvalue eq "NUM_TESTS" ||
+ $lvalue eq "LOG_FILE" ||
+ $lvalue eq "CLEAR_LOG")) {
+ die "$name: $.: $lvalue must be set in DEFAULTS section\n";
+ }
+
+ if ($lvalue eq "NUM_TESTS") {
+ if ($test_num) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
+ if (!$default) {
+ die "$name: $.: NUM_TESTS must be set in default section\n";
+ }
+ $num_tests_set = 1;
+ }
+
+ if ($default || $lvalue =~ /\[\d+\]$/) {
+ set_value($lvalue, $rvalue);
+ } else {
+ my $val = "$lvalue\[$test_num\]";
+ set_value($val, $rvalue);
+
+ if ($repeat > 1) {
+ $repeats{$val} = $repeat;
+ }
+ }
+ } else {
+ die "$name: $.: Garbage found in config\n$_";
+ }
+ }
+
+ close(IN);
+
+ if ($test_num) {
+ $test_num += $repeat - 1;
+ $opt{"NUM_TESTS"} = $test_num;
+ }
+
+ # make sure we have all mandatory configs
+ get_ktest_configs;
+
+ # set any defaults
+
+ foreach my $default (keys %default) {
+ if (!defined($opt{$default})) {
+ $opt{$default} = $default{$default};
+ }
+ }
+}
+
+sub _logit {
+ if (defined($opt{"LOG_FILE"})) {
+ open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+ print OUT @_;
+ close(OUT);
+ }
+}
+
+sub logit {
+ if (defined($opt{"LOG_FILE"})) {
+ _logit @_;
+ } else {
+ print @_;
+ }
+}
+
+sub doprint {
+ print @_;
+ _logit @_;
+}
+
+sub run_command;
+
+sub reboot {
+ # try to reboot normally
+ if (run_command $reboot) {
+ if (defined($powercycle_after_reboot)) {
+ sleep $powercycle_after_reboot;
+ run_command "$power_cycle";
+ }
+ } else {
+ # nope? power cycle it.
+ run_command "$power_cycle";
+ }
+}
+
+sub do_not_reboot {
+ my $i = $iteration;
+
+ return $test_type eq "build" ||
+ ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
+ ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
+}
+
+sub dodie {
+ doprint "CRITICAL FAILURE... ", @_, "\n";
+
+ my $i = $iteration;
+
+ if ($reboot_on_error && !do_not_reboot) {
+
+ doprint "REBOOTING\n";
+ reboot;
+
+ } elsif ($poweroff_on_error && defined($power_off)) {
+ doprint "POWERING OFF\n";
+ `$power_off`;
+ }
+
+ die @_, "\n";
+}
+
+sub open_console {
+ my ($fp) = @_;
+
+ my $flags;
+
+ my $pid = open($fp, "$console|") or
+ dodie "Can't open console $console";
+
+ $flags = fcntl($fp, F_GETFL, 0) or
+ dodie "Can't get flags for the socket: $!";
+ $flags = fcntl($fp, F_SETFL, $flags | O_NONBLOCK) or
+ dodie "Can't set flags for the socket: $!";
+
+ return $pid;
+}
+
+sub close_console {
+ my ($fp, $pid) = @_;
+
+ doprint "kill child process $pid\n";
+ kill 2, $pid;
+
+ print "closing!\n";
+ close($fp);
+}
+
+sub start_monitor {
+ if ($monitor_cnt++) {
+ return;
+ }
+ $monitor_fp = \*MONFD;
+ $monitor_pid = open_console $monitor_fp;
+
+ return;
+
+ open(MONFD, "Stop perl from warning about single use of MONFD");
+}
+
+sub end_monitor {
+ if (--$monitor_cnt) {
+ return;
+ }
+ close_console($monitor_fp, $monitor_pid);
+}
+
+sub wait_for_monitor {
+ my ($time) = @_;
+ my $line;
+
+ doprint "** Wait for monitor to settle down **\n";
+
+ # read the monitor and wait for the system to calm down
+ do {
+ $line = wait_for_input($monitor_fp, $time);
+ print "$line" if (defined($line));
+ } while (defined($line));
+ print "** Monitor flushed **\n";
+}
+
+sub fail {
+
+ if ($die_on_failure) {
+ dodie @_;
+ }
+
+ doprint "FAILED\n";
+
+ my $i = $iteration;
+
+ # no need to reboot for just building.
+ if (!do_not_reboot) {
+ doprint "REBOOTING\n";
+ reboot;
+ start_monitor;
+ wait_for_monitor $sleep_time;
+ end_monitor;
+ }
+
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "KTEST RESULT: TEST $i Failed: ", @_, "\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+
+ return 1 if (!defined($store_failures));
+
+ my @t = localtime;
+ my $date = sprintf "%04d%02d%02d%02d%02d%02d",
+ 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
+
+ my $type = $build_type;
+ if ($type =~ /useconfig/) {
+ $type = "useconfig";
+ }
+
+ my $dir = "$machine-$test_type-$type-fail-$date";
+ my $faildir = "$store_failures/$dir";
+
+ if (!-d $faildir) {
+ mkpath($faildir) or
+ die "can't create $faildir";
+ }
+ if (-f "$output_config") {
+ cp "$output_config", "$faildir/config" or
+ die "failed to copy .config";
+ }
+ if (-f $buildlog) {
+ cp $buildlog, "$faildir/buildlog" or
+ die "failed to move $buildlog";
+ }
+ if (-f $dmesg) {
+ cp $dmesg, "$faildir/dmesg" or
+ die "failed to move $dmesg";
+ }
+
+ doprint "*** Saved info to $faildir ***\n";
+
+ return 1;
+}
+
+sub run_command {
+ my ($command) = @_;
+ my $dolog = 0;
+ my $dord = 0;
+ my $pid;
+
+ $command =~ s/\$SSH_USER/$ssh_user/g;
+ $command =~ s/\$MACHINE/$machine/g;
+
+ doprint("$command ... ");
+
+ $pid = open(CMD, "$command 2>&1 |") or
+ (fail "unable to exec $command" and return 0);
+
+ if (defined($opt{"LOG_FILE"})) {
+ open(LOG, ">>$opt{LOG_FILE}") or
+ dodie "failed to write to log";
+ $dolog = 1;
+ }
+
+ if (defined($redirect)) {
+ open (RD, ">$redirect") or
+ dodie "failed to write to redirect $redirect";
+ $dord = 1;
+ }
+
+ while (<CMD>) {
+ print LOG if ($dolog);
+ print RD if ($dord);
+ }
+
+ waitpid($pid, 0);
+ my $failed = $?;
+
+ close(CMD);
+ close(LOG) if ($dolog);
+ close(RD) if ($dord);
+
+ if ($failed) {
+ doprint "FAILED!\n";
+ } else {
+ doprint "SUCCESS\n";
+ }
+
+ return !$failed;
+}
+
+sub run_ssh {
+ my ($cmd) = @_;
+ my $cp_exec = $ssh_exec;
+
+ $cp_exec =~ s/\$SSH_COMMAND/$cmd/g;
+ return run_command "$cp_exec";
+}
+
+sub run_scp {
+ my ($src, $dst) = @_;
+ my $cp_scp = $scp_to_target;
+
+ $cp_scp =~ s/\$SRC_FILE/$src/g;
+ $cp_scp =~ s/\$DST_FILE/$dst/g;
+
+ return run_command "$cp_scp";
+}
+
+sub get_grub_index {
+
+ if ($reboot_type ne "grub") {
+ return;
+ }
+ return if (defined($grub_number));
+
+ doprint "Find grub menu ... ";
+ $grub_number = -1;
+
+ my $ssh_grub = $ssh_exec;
+ $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
+
+ open(IN, "$ssh_grub |")
+ or die "unable to get menu.lst";
+
+ while (<IN>) {
+ if (/^\s*title\s+$grub_menu\s*$/) {
+ $grub_number++;
+ last;
+ } elsif (/^\s*title\s/) {
+ $grub_number++;
+ }
+ }
+ close(IN);
+
+ die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+ if ($grub_number < 0);
+ doprint "$grub_number\n";
+}
+
+sub wait_for_input
+{
+ my ($fp, $time) = @_;
+ my $rin;
+ my $ready;
+ my $line;
+ my $ch;
+
+ if (!defined($time)) {
+ $time = $timeout;
+ }
+
+ $rin = '';
+ vec($rin, fileno($fp), 1) = 1;
+ $ready = select($rin, undef, undef, $time);
+
+ $line = "";
+
+ # try to read one char at a time
+ while (sysread $fp, $ch, 1) {
+ $line .= $ch;
+ last if ($ch eq "\n");
+ }
+
+ if (!length($line)) {
+ return undef;
+ }
+
+ return $line;
+}
+
+sub reboot_to {
+ if ($reboot_type eq "grub") {
+ run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch; reboot)'";
+ return;
+ }
+
+ run_command "$reboot_script";
+}
+
+sub get_sha1 {
+ my ($commit) = @_;
+
+ doprint "git rev-list --max-count=1 $commit ... ";
+ my $sha1 = `git rev-list --max-count=1 $commit`;
+ my $ret = $?;
+
+ logit $sha1;
+
+ if ($ret) {
+ doprint "FAILED\n";
+ dodie "Failed to get git $commit";
+ }
+
+ print "SUCCESS\n";
+
+ chomp $sha1;
+
+ return $sha1;
+}
+
+sub monitor {
+ my $booted = 0;
+ my $bug = 0;
+ my $skip_call_trace = 0;
+ my $loops;
+
+ wait_for_monitor 5;
+
+ my $line;
+ my $full_line = "";
+
+ open(DMESG, "> $dmesg") or
+ die "unable to write to $dmesg";
+
+ reboot_to;
+
+ my $success_start;
+ my $failure_start;
+
+ for (;;) {
+
+ if ($booted) {
+ $line = wait_for_input($monitor_fp, $booted_timeout);
+ } else {
+ $line = wait_for_input($monitor_fp);
+ }
+
+ last if (!defined($line));
+
+ doprint $line;
+ print DMESG $line;
+
+ # we are not guaranteed to get a full line
+ $full_line .= $line;
+
+ if ($full_line =~ /$success_line/) {
+ $booted = 1;
+ $success_start = time;
+ }
+
+ if ($booted && defined($stop_after_success) &&
+ $stop_after_success >= 0) {
+ my $now = time;
+ if ($now - $success_start >= $stop_after_success) {
+ doprint "Test forced to stop after $stop_after_success seconds after success\n";
+ last;
+ }
+ }
+
+ if ($full_line =~ /\[ backtrace testing \]/) {
+ $skip_call_trace = 1;
+ }
+
+ if ($full_line =~ /call trace:/i) {
+ if (!$skip_call_trace) {
+ $bug = 1;
+ $failure_start = time;
+ }
+ }
+
+ if ($bug && defined($stop_after_failure) &&
+ $stop_after_failure >= 0) {
+ my $now = time;
+ if ($now - $failure_start >= $stop_after_failure) {
+ doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+ last;
+ }
+ }
+
+ if ($full_line =~ /\[ end of backtrace testing \]/) {
+ $skip_call_trace = 0;
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $bug = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
+
+ close(DMESG);
+
+ if ($bug) {
+ return 0 if ($in_bisect);
+ fail "failed - got a bug report" and return 0;
+ }
+
+ if (!$booted) {
+ return 0 if ($in_bisect);
+ fail "failed - never got a boot prompt." and return 0;
+ }
+
+ return 1;
+}
+
+sub install {
+
+ run_scp "$outputdir/$build_target", "$target_image" or
+ dodie "failed to copy image";
+
+ my $install_mods = 0;
+
+ # should we process modules?
+ $install_mods = 0;
+ open(IN, "$output_config") or dodie("Can't read config file");
+ while (<IN>) {
+ if (/CONFIG_MODULES(=y)?/) {
+ $install_mods = 1 if (defined($1));
+ last;
+ }
+ }
+ close(IN);
+
+ if (!$install_mods) {
+ doprint "No modules needed\n";
+ return;
+ }
+
+ run_command "$make INSTALL_MOD_PATH=$tmpdir modules_install" or
+ dodie "Failed to install modules";
+
+ my $modlib = "/lib/modules/$version";
+ my $modtar = "ktest-mods.tar.bz2";
+
+ run_ssh "rm -rf $modlib" or
+ dodie "failed to remove old mods: $modlib";
+
+ # would be nice if scp -r did not follow symbolic links
+ run_command "cd $tmpdir && tar -cjf $modtar lib/modules/$version" or
+ dodie "making tarball";
+
+ run_scp "$tmpdir/$modtar", "/tmp" or
+ dodie "failed to copy modules";
+
+ unlink "$tmpdir/$modtar";
+
+ run_ssh "'(cd / && tar xf /tmp/$modtar)'" or
+ dodie "failed to tar modules";
+
+ run_ssh "rm -f /tmp/$modtar";
+
+ return if (!defined($post_install));
+
+ my $cp_post_install = $post_install;
+ $cp_post_install = s/\$KERNEL_VERSION/$version/g;
+ run_command "$cp_post_install" or
+ dodie "Failed to run post install";
+}
+
+sub check_buildlog {
+ my ($patch) = @_;
+
+ my @files = `git show $patch | diffstat -l`;
+
+ open(IN, "git show $patch |") or
+ dodie "failed to show $patch";
+ while (<IN>) {
+ if (m,^--- a/(.*),) {
+ chomp $1;
+ $files[$#files] = $1;
+ }
+ }
+ close(IN);
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+ if (/^\s*(.*?):.*(warning|error)/) {
+ my $err = $1;
+ foreach my $file (@files) {
+ my $fullpath = "$builddir/$file";
+ if ($file eq $err || $fullpath eq $err) {
+ fail "$file built with warnings" and return 0;
+ }
+ }
+ }
+ }
+ close(IN);
+
+ return 1;
+}
+
+sub build {
+ my ($type) = @_;
+ my $defconfig = "";
+
+ unlink $buildlog;
+
+ if ($type =~ /^useconfig:(.*)/) {
+ run_command "cp $1 $output_config" or
+ dodie "could not copy $1 to .config";
+
+ $type = "oldconfig";
+ }
+
+ # old config can ask questions
+ if ($type eq "oldconfig") {
+ $type = "oldnoconfig";
+
+ # allow for empty configs
+ run_command "touch $output_config";
+
+ run_command "mv $output_config $outputdir/config_temp" or
+ dodie "moving .config";
+
+ if (!$noclean && !run_command "$make mrproper") {
+ dodie "make mrproper";
+ }
+
+ run_command "mv $outputdir/config_temp $output_config" or
+ dodie "moving config_temp";
+
+ } elsif (!$noclean) {
+ unlink "$output_config";
+ run_command "$make mrproper" or
+ dodie "make mrproper";
+ }
+
+ # add something to distinguish this build
+ open(OUT, "> $outputdir/localversion") or dodie("Can't make localversion file");
+ print OUT "$localversion\n";
+ close(OUT);
+
+ if (defined($minconfig)) {
+ $defconfig = "KCONFIG_ALLCONFIG=$minconfig";
+ }
+
+ run_command "$defconfig $make $type" or
+ dodie "failed make config";
+
+ $redirect = "$buildlog";
+ if (!run_command "$make $build_options") {
+ undef $redirect;
+ # bisect may need this to pass
+ return 0 if ($in_bisect);
+ fail "failed build" and return 0;
+ }
+ undef $redirect;
+
+ return 1;
+}
+
+sub halt {
+ if (!run_ssh "halt" or defined($power_off)) {
+ if (defined($poweroff_after_halt)) {
+ sleep $poweroff_after_halt;
+ run_command "$power_off";
+ }
+ } else {
+ # nope? the zap it!
+ run_command "$power_off";
+ }
+}
+
+sub success {
+ my ($i) = @_;
+
+ $successes++;
+
+ doprint "\n\n*******************************************\n";
+ doprint "*******************************************\n";
+ doprint "KTEST RESULT: TEST $i SUCCESS!!!! **\n";
+ doprint "*******************************************\n";
+ doprint "*******************************************\n";
+
+ if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
+ doprint "Reboot and wait $sleep_time seconds\n";
+ reboot;
+ start_monitor;
+ wait_for_monitor $sleep_time;
+ end_monitor;
+ }
+}
+
+sub get_version {
+ # get the release name
+ doprint "$make kernelrelease ... ";
+ $version = `$make kernelrelease | tail -1`;
+ chomp($version);
+ doprint "$version\n";
+}
+
+sub child_run_test {
+ my $failed = 0;
+
+ # child should have no power
+ $reboot_on_error = 0;
+ $poweroff_on_error = 0;
+ $die_on_failure = 1;
+
+ run_command $run_test or $failed = 1;
+ exit $failed;
+}
+
+my $child_done;
+
+sub child_finished {
+ $child_done = 1;
+}
+
+sub do_run_test {
+ my $child_pid;
+ my $child_exit;
+ my $line;
+ my $full_line;
+ my $bug = 0;
+
+ wait_for_monitor 1;
+
+ doprint "run test $run_test\n";
+
+ $child_done = 0;
+
+ $SIG{CHLD} = qw(child_finished);
+
+ $child_pid = fork;
+
+ child_run_test if (!$child_pid);
+
+ $full_line = "";
+
+ do {
+ $line = wait_for_input($monitor_fp, 1);
+ if (defined($line)) {
+
+ # we are not guaranteed to get a full line
+ $full_line .= $line;
+
+ if ($full_line =~ /call trace:/i) {
+ $bug = 1;
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $bug = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
+ } while (!$child_done && !$bug);
+
+ if ($bug) {
+ doprint "Detected kernel crash!\n";
+ # kill the child with extreme prejudice
+ kill 9, $child_pid;
+ }
+
+ waitpid $child_pid, 0;
+ $child_exit = $?;
+
+ if ($bug || $child_exit) {
+ return 0 if $in_bisect;
+ fail "test failed" and return 0;
+ }
+ return 1;
+}
+
+sub run_git_bisect {
+ my ($command) = @_;
+
+ doprint "$command ... ";
+
+ my $output = `$command 2>&1`;
+ my $ret = $?;
+
+ logit $output;
+
+ if ($ret) {
+ doprint "FAILED\n";
+ dodie "Failed to git bisect";
+ }
+
+ doprint "SUCCESS\n";
+ if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
+ doprint "$1 [$2]\n";
+ } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
+ $bisect_bad = $1;
+ doprint "Found bad commit... $1\n";
+ return 0;
+ } else {
+ # we already logged it, just print it now.
+ print $output;
+ }
+
+ return 1;
+}
+
+# returns 1 on success, 0 on failure
+sub run_bisect_test {
+ my ($type, $buildtype) = @_;
+
+ my $failed = 0;
+ my $result;
+ my $output;
+ my $ret;
+
+ $in_bisect = 1;
+
+ build $buildtype or $failed = 1;
+
+ if ($type ne "build") {
+ dodie "Failed on build" if $failed;
+
+ # Now boot the box
+ get_grub_index;
+ get_version;
+ install;
+
+ start_monitor;
+ monitor or $failed = 1;
+
+ if ($type ne "boot") {
+ dodie "Failed on boot" if $failed;
+
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ }
+
+ if ($failed) {
+ $result = 0;
+
+ # reboot the box to a good kernel
+ if ($type ne "build") {
+ doprint "Reboot and sleep $bisect_sleep_time seconds\n";
+ reboot;
+ start_monitor;
+ wait_for_monitor $bisect_sleep_time;
+ end_monitor;
+ }
+ } else {
+ $result = 1;
+ }
+ $in_bisect = 0;
+
+ return $result;
+}
+
+sub run_bisect {
+ my ($type) = @_;
+ my $buildtype = "oldconfig";
+
+ # We should have a minconfig to use?
+ if (defined($minconfig)) {
+ $buildtype = "useconfig:$minconfig";
+ }
+
+ my $ret = run_bisect_test $type, $buildtype;
+
+
+ # Are we looking for where it worked, not failed?
+ if ($reverse_bisect) {
+ $ret = !$ret;
+ }
+
+ if ($ret) {
+ return "good";
+ } else {
+ return "bad";
+ }
+}
+
+sub bisect {
+ my ($i) = @_;
+
+ my $result;
+
+ die "BISECT_GOOD[$i] not defined\n" if (!defined($opt{"BISECT_GOOD[$i]"}));
+ die "BISECT_BAD[$i] not defined\n" if (!defined($opt{"BISECT_BAD[$i]"}));
+ die "BISECT_TYPE[$i] not defined\n" if (!defined($opt{"BISECT_TYPE[$i]"}));
+
+ my $good = $opt{"BISECT_GOOD[$i]"};
+ my $bad = $opt{"BISECT_BAD[$i]"};
+ my $type = $opt{"BISECT_TYPE[$i]"};
+ my $start = $opt{"BISECT_START[$i]"};
+ my $replay = $opt{"BISECT_REPLAY[$i]"};
+
+ # convert to true sha1's
+ $good = get_sha1($good);
+ $bad = get_sha1($bad);
+
+ if (defined($opt{"BISECT_REVERSE[$i]"}) &&
+ $opt{"BISECT_REVERSE[$i]"} == 1) {
+ doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
+ $reverse_bisect = 1;
+ } else {
+ $reverse_bisect = 0;
+ }
+
+ # Can't have a test without having a test to run
+ if ($type eq "test" && !defined($run_test)) {
+ $type = "boot";
+ }
+
+ my $check = $opt{"BISECT_CHECK[$i]"};
+ if (defined($check) && $check ne "0") {
+
+ # get current HEAD
+ my $head = get_sha1("HEAD");
+
+ if ($check ne "good") {
+ doprint "TESTING BISECT BAD [$bad]\n";
+ run_command "git checkout $bad" or
+ die "Failed to checkout $bad";
+
+ $result = run_bisect $type;
+
+ if ($result ne "bad") {
+ fail "Tested BISECT_BAD [$bad] and it succeeded" and return 0;
+ }
+ }
+
+ if ($check ne "bad") {
+ doprint "TESTING BISECT GOOD [$good]\n";
+ run_command "git checkout $good" or
+ die "Failed to checkout $good";
+
+ $result = run_bisect $type;
+
+ if ($result ne "good") {
+ fail "Tested BISECT_GOOD [$good] and it failed" and return 0;
+ }
+ }
+
+ # checkout where we started
+ run_command "git checkout $head" or
+ die "Failed to checkout $head";
+ }
+
+ run_command "git bisect start" or
+ dodie "could not start bisect";
+
+ run_command "git bisect good $good" or
+ dodie "could not set bisect good to $good";
+
+ run_git_bisect "git bisect bad $bad" or
+ dodie "could not set bisect bad to $bad";
+
+ if (defined($replay)) {
+ run_command "git bisect replay $replay" or
+ dodie "failed to run replay";
+ }
+
+ if (defined($start)) {
+ run_command "git checkout $start" or
+ dodie "failed to checkout $start";
+ }
+
+ my $test;
+ do {
+ $result = run_bisect $type;
+ $test = run_git_bisect "git bisect $result";
+ } while ($test);
+
+ run_command "git bisect log" or
+ dodie "could not capture git bisect log";
+
+ run_command "git bisect reset" or
+ dodie "could not reset git bisect";
+
+ doprint "Bad commit was [$bisect_bad]\n";
+
+ success $i;
+}
+
+my %config_ignore;
+my %config_set;
+
+my %config_list;
+my %null_config;
+
+my %dependency;
+
+sub process_config_ignore {
+ my ($config) = @_;
+
+ open (IN, $config)
+ or dodie "Failed to read $config";
+
+ while (<IN>) {
+ if (/^(.*?(CONFIG\S*)(=.*| is not set))/) {
+ $config_ignore{$2} = $1;
+ }
+ }
+
+ close(IN);
+}
+
+sub read_current_config {
+ my ($config_ref) = @_;
+
+ %{$config_ref} = ();
+ undef %{$config_ref};
+
+ my @key = keys %{$config_ref};
+ if ($#key >= 0) {
+ print "did not delete!\n";
+ exit;
+ }
+ open (IN, "$output_config");
+
+ while (<IN>) {
+ if (/^(CONFIG\S+)=(.*)/) {
+ ${$config_ref}{$1} = $2;
+ }
+ }
+ close(IN);
+}
+
+sub get_dependencies {
+ my ($config) = @_;
+
+ my $arr = $dependency{$config};
+ if (!defined($arr)) {
+ return ();
+ }
+
+ my @deps = @{$arr};
+
+ foreach my $dep (@{$arr}) {
+ print "ADD DEP $dep\n";
+ @deps = (@deps, get_dependencies $dep);
+ }
+
+ return @deps;
+}
+
+sub create_config {
+ my @configs = @_;
+
+ open(OUT, ">$output_config") or dodie "Can not write to $output_config";
+
+ foreach my $config (@configs) {
+ print OUT "$config_set{$config}\n";
+ my @deps = get_dependencies $config;
+ foreach my $dep (@deps) {
+ print OUT "$config_set{$dep}\n";
+ }
+ }
+
+ foreach my $config (keys %config_ignore) {
+ print OUT "$config_ignore{$config}\n";
+ }
+ close(OUT);
+
+# exit;
+ run_command "$make oldnoconfig" or
+ dodie "failed make config oldconfig";
+
+}
+
+sub compare_configs {
+ my (%a, %b) = @_;
+
+ foreach my $item (keys %a) {
+ if (!defined($b{$item})) {
+ print "diff $item\n";
+ return 1;
+ }
+ delete $b{$item};
+ }
+
+ my @keys = keys %b;
+ if ($#keys) {
+ print "diff2 $keys[0]\n";
+ }
+ return -1 if ($#keys >= 0);
+
+ return 0;
+}
+
+sub run_config_bisect_test {
+ my ($type) = @_;
+
+ return run_bisect_test $type, "oldconfig";
+}
+
+sub process_passed {
+ my (%configs) = @_;
+
+ doprint "These configs had no failure: (Enabling them for further compiles)\n";
+ # Passed! All these configs are part of a good compile.
+ # Add them to the min options.
+ foreach my $config (keys %configs) {
+ if (defined($config_list{$config})) {
+ doprint " removing $config\n";
+ $config_ignore{$config} = $config_list{$config};
+ delete $config_list{$config};
+ }
+ }
+ doprint "config copied to $outputdir/config_good\n";
+ run_command "cp -f $output_config $outputdir/config_good";
+}
+
+sub process_failed {
+ my ($config) = @_;
+
+ doprint "\n\n***************************************\n";
+ doprint "Found bad config: $config\n";
+ doprint "***************************************\n\n";
+}
+
+sub run_config_bisect {
+
+ my @start_list = keys %config_list;
+
+ if ($#start_list < 0) {
+ doprint "No more configs to test!!!\n";
+ return -1;
+ }
+
+ doprint "***** RUN TEST ***\n";
+ my $type = $opt{"CONFIG_BISECT_TYPE[$iteration]"};
+ my $ret;
+ my %current_config;
+
+ my $count = $#start_list + 1;
+ doprint " $count configs to test\n";
+
+ my $half = int($#start_list / 2);
+
+ do {
+ my @tophalf = @start_list[0 .. $half];
+
+ create_config @tophalf;
+ read_current_config \%current_config;
+
+ $count = $#tophalf + 1;
+ doprint "Testing $count configs\n";
+ my $found = 0;
+ # make sure we test something
+ foreach my $config (@tophalf) {
+ if (defined($current_config{$config})) {
+ logit " $config\n";
+ $found = 1;
+ }
+ }
+ if (!$found) {
+ # try the other half
+ doprint "Top half produced no set configs, trying bottom half\n";
+ @tophalf = @start_list[$half .. $#start_list];
+ create_config @tophalf;
+ read_current_config \%current_config;
+ foreach my $config (@tophalf) {
+ if (defined($current_config{$config})) {
+ logit " $config\n";
+ $found = 1;
+ }
+ }
+ if (!$found) {
+ doprint "Failed: Can't make new config with current configs\n";
+ foreach my $config (@start_list) {
+ doprint " CONFIG: $config\n";
+ }
+ return -1;
+ }
+ $count = $#tophalf + 1;
+ doprint "Testing $count configs\n";
+ }
+
+ $ret = run_config_bisect_test $type;
+
+ if ($ret) {
+ process_passed %current_config;
+ return 0;
+ }
+
+ doprint "This config had a failure.\n";
+ doprint "Removing these configs that were not set in this config:\n";
+ doprint "config copied to $outputdir/config_bad\n";
+ run_command "cp -f $output_config $outputdir/config_bad";
+
+ # A config exists in this group that was bad.
+ foreach my $config (keys %config_list) {
+ if (!defined($current_config{$config})) {
+ doprint " removing $config\n";
+ delete $config_list{$config};
+ }
+ }
+
+ @start_list = @tophalf;
+
+ if ($#start_list == 0) {
+ process_failed $start_list[0];
+ return 1;
+ }
+
+ # remove half the configs we are looking at and see if
+ # they are good.
+ $half = int($#start_list / 2);
+ } while ($half > 0);
+
+ # we found a single config, try it again
+ my @tophalf = @start_list[0 .. 0];
+
+ $ret = run_config_bisect_test $type;
+ if ($ret) {
+ process_passed %current_config;
+ return 0;
+ }
+
+ process_failed $start_list[0];
+ return 1;
+}
+
+sub config_bisect {
+ my ($i) = @_;
+
+ my $start_config = $opt{"CONFIG_BISECT[$i]"};
+
+ my $tmpconfig = "$tmpdir/use_config";
+
+ # Make the file with the bad config and the min config
+ if (defined($minconfig)) {
+ # read the min config for things to ignore
+ run_command "cp $minconfig $tmpconfig" or
+ dodie "failed to copy $minconfig to $tmpconfig";
+ } else {
+ unlink $tmpconfig;
+ }
+
+ # Add other configs
+ if (defined($addconfig)) {
+ run_command "cat $addconfig >> $tmpconfig" or
+ dodie "failed to append $addconfig";
+ }
+
+ my $defconfig = "";
+ if (-f $tmpconfig) {
+ $defconfig = "KCONFIG_ALLCONFIG=$tmpconfig";
+ process_config_ignore $tmpconfig;
+ }
+
+ # now process the start config
+ run_command "cp $start_config $output_config" or
+ dodie "failed to copy $start_config to $output_config";
+
+ # read directly what we want to check
+ my %config_check;
+ open (IN, $output_config)
+ or dodie "faied to open $output_config";
+
+ while (<IN>) {
+ if (/^((CONFIG\S*)=.*)/) {
+ $config_check{$2} = $1;
+ }
+ }
+ close(IN);
+
+ # Now run oldconfig with the minconfig (and addconfigs)
+ run_command "$defconfig $make oldnoconfig" or
+ dodie "failed make config oldconfig";
+
+ # check to see what we lost (or gained)
+ open (IN, $output_config)
+ or dodie "Failed to read $start_config";
+
+ my %removed_configs;
+ my %added_configs;
+
+ while (<IN>) {
+ if (/^((CONFIG\S*)=.*)/) {
+ # save off all options
+ $config_set{$2} = $1;
+ if (defined($config_check{$2})) {
+ if (defined($config_ignore{$2})) {
+ $removed_configs{$2} = $1;
+ } else {
+ $config_list{$2} = $1;
+ }
+ } elsif (!defined($config_ignore{$2})) {
+ $added_configs{$2} = $1;
+ $config_list{$2} = $1;
+ }
+ }
+ }
+ close(IN);
+
+ my @confs = keys %removed_configs;
+ if ($#confs >= 0) {
+ doprint "Configs overridden by default configs and removed from check:\n";
+ foreach my $config (@confs) {
+ doprint " $config\n";
+ }
+ }
+ @confs = keys %added_configs;
+ if ($#confs >= 0) {
+ doprint "Configs appearing in make oldconfig and added:\n";
+ foreach my $config (@confs) {
+ doprint " $config\n";
+ }
+ }
+
+ my %config_test;
+ my $once = 0;
+
+ # Sometimes kconfig does weird things. We must make sure
+ # that the config we autocreate has everything we need
+ # to test, otherwise we may miss testing configs, or
+ # may not be able to create a new config.
+ # Here we create a config with everything set.
+ create_config (keys %config_list);
+ read_current_config \%config_test;
+ foreach my $config (keys %config_list) {
+ if (!defined($config_test{$config})) {
+ if (!$once) {
+ $once = 1;
+ doprint "Configs not produced by kconfig (will not be checked):\n";
+ }
+ doprint " $config\n";
+ delete $config_list{$config};
+ }
+ }
+ my $ret;
+ do {
+ $ret = run_config_bisect;
+ } while (!$ret);
+
+ return $ret if ($ret < 0);
+
+ success $i;
+}
+
+sub patchcheck {
+ my ($i) = @_;
+
+ die "PATCHCHECK_START[$i] not defined\n"
+ if (!defined($opt{"PATCHCHECK_START[$i]"}));
+ die "PATCHCHECK_TYPE[$i] not defined\n"
+ if (!defined($opt{"PATCHCHECK_TYPE[$i]"}));
+
+ my $start = $opt{"PATCHCHECK_START[$i]"};
+
+ my $end = "HEAD";
+ if (defined($opt{"PATCHCHECK_END[$i]"})) {
+ $end = $opt{"PATCHCHECK_END[$i]"};
+ }
+
+ # Get the true sha1's since we can use things like HEAD~3
+ $start = get_sha1($start);
+ $end = get_sha1($end);
+
+ my $type = $opt{"PATCHCHECK_TYPE[$i]"};
+
+ # Can't have a test without having a test to run
+ if ($type eq "test" && !defined($run_test)) {
+ $type = "boot";
+ }
+
+ open (IN, "git log --pretty=oneline $end|") or
+ dodie "could not get git list";
+
+ my @list;
+
+ while (<IN>) {
+ chomp;
+ $list[$#list+1] = $_;
+ last if (/^$start/);
+ }
+ close(IN);
+
+ if ($list[$#list] !~ /^$start/) {
+ fail "SHA1 $start not found";
+ }
+
+ # go backwards in the list
+ @list = reverse @list;
+
+ my $save_clean = $noclean;
+
+ $in_patchcheck = 1;
+ foreach my $item (@list) {
+ my $sha1 = $item;
+ $sha1 =~ s/^([[:xdigit:]]+).*/$1/;
+
+ doprint "\nProcessing commit $item\n\n";
+
+ run_command "git checkout $sha1" or
+ die "Failed to checkout $sha1";
+
+ # only clean on the first and last patch
+ if ($item eq $list[0] ||
+ $item eq $list[$#list]) {
+ $noclean = $save_clean;
+ } else {
+ $noclean = 1;
+ }
+
+ if (defined($minconfig)) {
+ build "useconfig:$minconfig" or return 0;
+ } else {
+ # ?? no config to use?
+ build "oldconfig" or return 0;
+ }
+
+ check_buildlog $sha1 or return 0;
+
+ next if ($type eq "build");
+
+ get_grub_index;
+ get_version;
+ install;
+
+ my $failed = 0;
+
+ start_monitor;
+ monitor or $failed = 1;
+
+ if (!$failed && $type ne "boot"){
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ return 0 if ($failed);
+
+ }
+ $in_patchcheck = 0;
+ success $i;
+
+ return 1;
+}
+
+$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl config-file\n";
+
+if ($#ARGV == 0) {
+ $ktest_config = $ARGV[0];
+ if (! -f $ktest_config) {
+ print "$ktest_config does not exist.\n";
+ my $ans;
+ for (;;) {
+ print "Create it? [Y/n] ";
+ $ans = <STDIN>;
+ chomp $ans;
+ if ($ans =~ /^\s*$/) {
+ $ans = "y";
+ }
+ last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
+ print "Please answer either 'y' or 'n'.\n";
+ }
+ if ($ans !~ /^y$/i) {
+ exit 0;
+ }
+ }
+} else {
+ $ktest_config = "ktest.conf";
+}
+
+if (! -f $ktest_config) {
+ open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
+ print OUT << "EOF"
+# Generated by ktest.pl
+#
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START
+
+DEFAULTS
+EOF
+;
+ close(OUT);
+}
+read_config $ktest_config;
+
+# Append any configs entered in manually to the config file.
+my @new_configs = keys %entered_configs;
+if ($#new_configs >= 0) {
+ print "\nAppending entered in configs to $ktest_config\n";
+ open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
+ foreach my $config (@new_configs) {
+ print OUT "$config = $entered_configs{$config}\n";
+ $opt{$config} = $entered_configs{$config};
+ }
+}
+
+if ($opt{"CLEAR_LOG"} && defined($opt{"LOG_FILE"})) {
+ unlink $opt{"LOG_FILE"};
+}
+
+doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
+
+for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
+
+ if (!$i) {
+ doprint "DEFAULT OPTIONS:\n";
+ } else {
+ doprint "\nTEST $i OPTIONS";
+ if (defined($repeat_tests{$i})) {
+ $repeat = $repeat_tests{$i};
+ doprint " ITERATE $repeat";
+ }
+ doprint "\n";
+ }
+
+ foreach my $option (sort keys %opt) {
+
+ if ($option =~ /\[(\d+)\]$/) {
+ next if ($i != $1);
+ } else {
+ next if ($i);
+ }
+
+ doprint "$option = $opt{$option}\n";
+ }
+}
+
+sub set_test_option {
+ my ($name, $i) = @_;
+
+ my $option = "$name\[$i\]";
+
+ if (defined($opt{$option})) {
+ return $opt{$option};
+ }
+
+ foreach my $test (keys %repeat_tests) {
+ if ($i >= $test &&
+ $i < $test + $repeat_tests{$test}) {
+ $option = "$name\[$test\]";
+ if (defined($opt{$option})) {
+ return $opt{$option};
+ }
+ }
+ }
+
+ if (defined($opt{$name})) {
+ return $opt{$name};
+ }
+
+ return undef;
+}
+
+# First we need to do is the builds
+for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+
+ $iteration = $i;
+
+ my $makecmd = set_test_option("MAKE_CMD", $i);
+
+ $machine = set_test_option("MACHINE", $i);
+ $ssh_user = set_test_option("SSH_USER", $i);
+ $tmpdir = set_test_option("TMP_DIR", $i);
+ $outputdir = set_test_option("OUTPUT_DIR", $i);
+ $builddir = set_test_option("BUILD_DIR", $i);
+ $test_type = set_test_option("TEST_TYPE", $i);
+ $build_type = set_test_option("BUILD_TYPE", $i);
+ $build_options = set_test_option("BUILD_OPTIONS", $i);
+ $power_cycle = set_test_option("POWER_CYCLE", $i);
+ $reboot = set_test_option("REBOOT", $i);
+ $noclean = set_test_option("BUILD_NOCLEAN", $i);
+ $minconfig = set_test_option("MIN_CONFIG", $i);
+ $run_test = set_test_option("TEST", $i);
+ $addconfig = set_test_option("ADD_CONFIG", $i);
+ $reboot_type = set_test_option("REBOOT_TYPE", $i);
+ $grub_menu = set_test_option("GRUB_MENU", $i);
+ $post_install = set_test_option("POST_INSTALL", $i);
+ $reboot_script = set_test_option("REBOOT_SCRIPT", $i);
+ $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
+ $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
+ $die_on_failure = set_test_option("DIE_ON_FAILURE", $i);
+ $power_off = set_test_option("POWER_OFF", $i);
+ $powercycle_after_reboot = set_test_option("POWERCYCLE_AFTER_REBOOT", $i);
+ $poweroff_after_halt = set_test_option("POWEROFF_AFTER_HALT", $i);
+ $sleep_time = set_test_option("SLEEP_TIME", $i);
+ $bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i);
+ $store_failures = set_test_option("STORE_FAILURES", $i);
+ $timeout = set_test_option("TIMEOUT", $i);
+ $booted_timeout = set_test_option("BOOTED_TIMEOUT", $i);
+ $console = set_test_option("CONSOLE", $i);
+ $success_line = set_test_option("SUCCESS_LINE", $i);
+ $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
+ $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
+ $build_target = set_test_option("BUILD_TARGET", $i);
+ $ssh_exec = set_test_option("SSH_EXEC", $i);
+ $scp_to_target = set_test_option("SCP_TO_TARGET", $i);
+ $target_image = set_test_option("TARGET_IMAGE", $i);
+ $localversion = set_test_option("LOCALVERSION", $i);
+
+ chdir $builddir || die "can't change directory to $builddir";
+
+ if (!-d $tmpdir) {
+ mkpath($tmpdir) or
+ die "can't create $tmpdir";
+ }
+
+ $ENV{"SSH_USER"} = $ssh_user;
+ $ENV{"MACHINE"} = $machine;
+
+ $target = "$ssh_user\@$machine";
+
+ $buildlog = "$tmpdir/buildlog-$machine";
+ $dmesg = "$tmpdir/dmesg-$machine";
+ $make = "$makecmd O=$outputdir";
+ $output_config = "$outputdir/.config";
+
+ if ($reboot_type eq "grub") {
+ dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+ } elsif (!defined($reboot_script)) {
+ dodie "REBOOT_SCRIPT not defined"
+ }
+
+ my $run_type = $build_type;
+ if ($test_type eq "patchcheck") {
+ $run_type = $opt{"PATCHCHECK_TYPE[$i]"};
+ } elsif ($test_type eq "bisect") {
+ $run_type = $opt{"BISECT_TYPE[$i]"};
+ } elsif ($test_type eq "config_bisect") {
+ $run_type = $opt{"CONFIG_BISECT_TYPE[$i]"};
+ }
+
+ # mistake in config file?
+ if (!defined($run_type)) {
+ $run_type = "ERROR";
+ }
+
+ doprint "\n\n";
+ doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n";
+
+ unlink $dmesg;
+ unlink $buildlog;
+
+ if (!defined($minconfig)) {
+ $minconfig = $addconfig;
+
+ } elsif (defined($addconfig)) {
+ run_command "cat $addconfig $minconfig > $tmpdir/add_config" or
+ dodie "Failed to create temp config";
+ $minconfig = "$tmpdir/add_config";
+ }
+
+ my $checkout = $opt{"CHECKOUT[$i]"};
+ if (defined($checkout)) {
+ run_command "git checkout $checkout" or
+ die "failed to checkout $checkout";
+ }
+
+ if ($test_type eq "bisect") {
+ bisect $i;
+ next;
+ } elsif ($test_type eq "config_bisect") {
+ config_bisect $i;
+ next;
+ } elsif ($test_type eq "patchcheck") {
+ patchcheck $i;
+ next;
+ }
+
+ if ($build_type ne "nobuild") {
+ build $build_type or next;
+ }
+
+ if ($test_type ne "build") {
+ get_grub_index;
+ get_version;
+ install;
+
+ my $failed = 0;
+ start_monitor;
+ monitor or $failed = 1;;
+
+ if (!$failed && $test_type ne "boot" && defined($run_test)) {
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ next if ($failed);
+ }
+
+ success $i;
+}
+
+if ($opt{"POWEROFF_ON_SUCCESS"}) {
+ halt;
+} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) {
+ reboot;
+}
+
+doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n";
+
+exit 0;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
new file mode 100644
index 0000000..3408c59
--- /dev/null
+++ b/tools/testing/ktest/sample.conf
@@ -0,0 +1,622 @@
+#
+# Config file for ktest.pl
+#
+# Note, all paths must be absolute
+#
+
+# Options set in the beginning of the file are considered to be
+# default options. These options can be overriden by test specific
+# options, with the following exceptions:
+#
+# LOG_FILE
+# CLEAR_LOG
+# POWEROFF_ON_SUCCESS
+# REBOOT_ON_SUCCESS
+#
+# Test specific options are set after the label:
+#
+# TEST_START
+#
+# The options after a TEST_START label are specific to that test.
+# Each TEST_START label will set up a new test. If you want to
+# perform a test more than once, you can add the ITERATE label
+# to it followed by the number of times you want that test
+# to iterate. If the ITERATE is left off, the test will only
+# be performed once.
+#
+# TEST_START ITERATE 10
+#
+# You can skip a test by adding SKIP (before or after the ITERATE
+# and number)
+#
+# TEST_START SKIP
+#
+# TEST_START SKIP ITERATE 10
+#
+# TEST_START ITERATE 10 SKIP
+#
+# The SKIP label causes the options and the test itself to be ignored.
+# This is useful to set up several different tests in one config file, and
+# only enabling the ones you want to use for a current test run.
+#
+# You can add default options anywhere in the file as well
+# with the DEFAULTS tag. This allows you to have default options
+# after the test options to keep the test options at the top
+# of the file. You can even place the DEFAULTS tag between
+# test cases (but not in the middle of a single test case)
+#
+# TEST_START
+# MIN_CONFIG = /home/test/config-test1
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-default
+#
+# TEST_START ITERATE 10
+#
+# The above will run the first test with MIN_CONFIG set to
+# /home/test/config-test-1. Then 10 tests will be executed
+# with MIN_CONFIG with /home/test/config-default.
+#
+# You can also disable defaults with the SKIP option
+#
+# DEFAULTS SKIP
+# MIN_CONFIG = /home/test/config-use-sometimes
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-most-times
+#
+# The above will ignore the first MIN_CONFIG. If you want to
+# use the first MIN_CONFIG, remove the SKIP from the first
+# DEFAULTS tag and add it to the second. Be careful, options
+# may only be declared once per test or default. If you have
+# the same option name under the same test or as default
+# ktest will fail to execute, and no tests will run.
+#
+
+
+#### Mandatory Default Options ####
+
+# These options must be in the default section, although most
+# may be overridden by test options.
+
+# The machine hostname that you will test
+#MACHINE = target
+
+# The box is expected to have ssh on normal bootup, provide the user
+# (most likely root, since you need privileged operations)
+#SSH_USER = root
+
+# The directory that contains the Linux source code
+#BUILD_DIR = /home/test/linux.git
+
+# The directory that the objects will be built
+# (can not be same as BUILD_DIR)
+#OUTPUT_DIR = /home/test/build/target
+
+# The location of the compiled file to copy to the target
+# (relative to OUTPUT_DIR)
+#BUILD_TARGET = arch/x86/boot/bzImage
+
+# The place to put your image on the test machine
+#TARGET_IMAGE = /boot/vmlinuz-test
+
+# A script or command to reboot the box
+#
+# Here is a digital loggers power switch example
+#POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=CCL'
+#
+# Here is an example to reboot a virtual box on the current host
+# with the name "Guest".
+#POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+
+# The script or command that reads the console
+#
+# If you use ttywatch server, something like the following would work.
+#CONSOLE = nc -d localhost 3001
+#
+# For a virtual machine with guest name "Guest".
+#CONSOLE = virsh console Guest
+
+# Required version ending to differentiate the test
+# from other linux builds on the system.
+#LOCALVERSION = -test
+
+# The grub title name for the test kernel to boot
+# (Only mandatory if REBOOT_TYPE = grub)
+#
+# Note, ktest.pl will not update the grub menu.lst, you need to
+# manually add an option for the test. ktest.pl will search
+# the grub menu.lst for this option to find what kernel to
+# reboot into.
+#
+# For example, if in the /boot/grub/menu.lst the test kernel title has:
+# title Test Kernel
+# kernel vmlinuz-test
+#GRUB_MENU = Test Kernel
+
+# A script to reboot the target into the test kernel
+# (Only mandatory if REBOOT_TYPE = script)
+#REBOOT_SCRIPT =
+
+#### Optional Config Options (all have defaults) ####
+
+# Start a test setup. If you leave this off, all options
+# will be default and the test will run once.
+# This is a label and not really an option (it takes no value).
+# You can append ITERATE and a number after it to iterate the
+# test a number of times, or SKIP to ignore this test.
+#
+#TEST_START
+#TEST_START ITERATE 5
+#TEST_START SKIP
+
+# Have the following options as default again. Used after tests
+# have already been defined by TEST_START. Optionally, you can
+# just define all default options before the first TEST_START
+# and you do not need this option.
+#
+# This is a label and not really an option (it takes no value).
+# You can append SKIP to this label and the options within this
+# section will be ignored.
+#
+# DEFAULTS
+# DEFAULTS SKIP
+
+# The default test type (default test)
+# The test types may be:
+# build - only build the kernel, do nothing else
+# boot - build and boot the kernel
+# test - build, boot and if TEST is set, run the test script
+# (If TEST is not set, it defaults back to boot)
+# bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
+# patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
+#TEST_TYPE = test
+
+# Test to run if there is a successful boot and TEST_TYPE is test.
+# Must exit with 0 on success and non zero on error
+# default (undefined)
+#TEST = ssh user@machine /root/run_test
+
+# The build type is any make config type or special command
+# (default randconfig)
+# nobuild - skip the clean and build step
+# useconfig:/path/to/config - use the given config and run
+# oldconfig on it.
+# This option is ignored if TEST_TYPE is patchcheck or bisect
+#BUILD_TYPE = randconfig
+
+# The make command (default make)
+# If you are building a 32bit x86 on a 64 bit host
+#MAKE_CMD = CC=i386-gcc AS=i386-as make ARCH=i386
+
+# Any build options for the make of the kernel (not for other makes, like configs)
+# (default "")
+#BUILD_OPTIONS = -j20
+
+# If you need an initrd, you can add a script or code here to install
+# it. The environment variable KERNEL_VERSION will be set to the
+# kernel version that is used. Remember to add the initrd line
+# to your grub menu.lst file.
+#
+# Here's a couple of examples to use:
+#POST_INSTALL = ssh user@target /sbin/mkinitrd --allow-missing -f /boot/initramfs-test.img $KERNEL_VERSION
+#
+# or on some systems:
+#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# Way to reboot the box to the test kernel.
+# Only valid options so far are "grub" and "script"
+# (default grub)
+# If you specify grub, it will assume grub version 1
+# and will search in /boot/grub/menu.lst for the title $GRUB_MENU
+# and select that target to reboot to the kernel. If this is not
+# your setup, then specify "script" and have a command or script
+# specified in REBOOT_SCRIPT to boot to the target.
+#
+# The entry in /boot/grub/menu.lst must be entered in manually.
+# The test will not modify that file.
+#REBOOT_TYPE = grub
+
+# The min config that is needed to build for the machine
+# A nice way to create this is with the following:
+#
+# $ ssh target
+# $ lsmod > mymods
+# $ scp mymods host:/tmp
+# $ exit
+# $ cd linux.git
+# $ rm .config
+# $ make LSMOD=mymods localyesconfig
+# $ grep '^CONFIG' .config > /home/test/config-min
+#
+# If you want even less configs:
+#
+# log in directly to target (do not ssh)
+#
+# $ su
+# # lsmod | cut -d' ' -f1 | xargs rmmod
+#
+# repeat the above several times
+#
+# # lsmod > mymods
+# # reboot
+#
+# May need to reboot to get your network back to copy the mymods
+# to the host, and then remove the previous .config and run the
+# localyesconfig again. The CONFIG_MIN generated like this will
+# not guarantee network activity to the box so the TEST_TYPE of
+# test may fail.
+#
+# You might also want to set:
+# CONFIG_CMDLINE="<your options here>"
+# randconfig may set the above and override your real command
+# line options.
+# (default undefined)
+#MIN_CONFIG = /home/test/config-min
+
+# Sometimes there's options that just break the boot and
+# you do not care about. Here are a few:
+# # CONFIG_STAGING is not set
+# Staging drivers are horrible, and can break the build.
+# # CONFIG_SCSI_DEBUG is not set
+# SCSI_DEBUG may change your root partition
+# # CONFIG_KGDB_SERIAL_CONSOLE is not set
+# KGDB may cause oops waiting for a connection that's not there.
+# This option points to the file containing config options that will be prepended
+# to the MIN_CONFIG (or be the MIN_CONFIG if it is not set)
+#
+# Note, config options in MIN_CONFIG will override these options.
+#
+# (default undefined)
+#ADD_CONFIG = /home/test/config-broken
+
+# The location on the host where to write temp files
+# (default /tmp/ktest)
+#TMP_DIR = /tmp/ktest
+
+# Optional log file to write the status (recommended)
+# Note, this is a DEFAULT section only option.
+# (default undefined)
+#LOG_FILE = /home/test/logfiles/target.log
+
+# Remove old logfile if it exists before starting all tests.
+# Note, this is a DEFAULT section only option.
+# (default 0)
+#CLEAR_LOG = 0
+
+# Line to define a successful boot up in console output.
+# This is what the line contains, not the entire line. If you need
+# the entire line to match, then use regural expression syntax like:
+# (do not add any quotes around it)
+#
+# SUCCESS_LINE = ^MyBox Login:$
+#
+# (default "login:")
+#SUCCESS_LINE = login:
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after success is recommended.
+# (in seconds)
+# (default 10)
+#STOP_AFTER_SUCCESS = 10
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after failure is recommended.
+# (in seconds)
+# (default 60)
+#STOP_AFTER_FAILURE = 60
+
+# Stop testing if a build fails. If set, the script will end if
+# a failure is detected, otherwise it will save off the .config,
+# dmesg and bootlog in a directory called
+# MACHINE-TEST_TYPE_BUILD_TYPE-fail-yyyymmddhhmmss
+# if the STORE_FAILURES directory is set.
+# (default 1)
+# Note, even if this is set to zero, there are some errors that still
+# stop the tests.
+#DIE_ON_FAILURE = 1
+
+# Directory to store failure directories on failure. If this is not
+# set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and
+# bootlog. This option is ignored if DIE_ON_FAILURE is not set.
+# (default undefined)
+#STORE_FAILURES = /home/test/failures
+
+# Build without doing a make mrproper, or removing .config
+# (default 0)
+#BUILD_NOCLEAN = 0
+
+# As the test reads the console, after it hits the SUCCESS_LINE
+# the time it waits for the monitor to settle down between reads
+# can usually be lowered.
+# (in seconds) (default 1)
+#BOOTED_TIMEOUT = 1
+
+# The timeout in seconds when we consider the box hung after
+# the console stop producing output. Be sure to leave enough
+# time here to get pass a reboot. Some machines may not produce
+# any console output for a long time during a reboot. You do
+# not want the test to fail just because the system was in
+# the process of rebooting to the test kernel.
+# (default 120)
+#TIMEOUT = 120
+
+# In between tests, a reboot of the box may occur, and this
+# is the time to wait for the console after it stops producing
+# output. Some machines may not produce a large lag on reboot
+# so this should accommodate it.
+# The difference between this and TIMEOUT, is that TIMEOUT happens
+# when rebooting to the test kernel. This sleep time happens
+# after a test has completed and we are about to start running
+# another test. If a reboot to the reliable kernel happens,
+# we wait SLEEP_TIME for the console to stop producing output
+# before starting the next test.
+# (default 60)
+#SLEEP_TIME = 60
+
+# The time in between bisects to sleep (in seconds)
+# (default 60)
+#BISECT_SLEEP_TIME = 60
+
+# Reboot the target box on error (default 0)
+#REBOOT_ON_ERROR = 0
+
+# Power off the target on error (ignored if REBOOT_ON_ERROR is set)
+# Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_ERROR = 0
+
+# Power off the target after all tests have completed successfully
+# Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_SUCCESS = 0
+
+# Reboot the target after all test completed successfully (default 1)
+# (ignored if POWEROFF_ON_SUCCESS is set)
+#REBOOT_ON_SUCCESS = 1
+
+# In case there are isses with rebooting, you can specify this
+# to always powercycle after this amount of time after calling
+# reboot.
+# Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
+# makes it powercycle immediately after rebooting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWERCYCLE_AFTER_REBOOT = 5
+
+# In case there's isses with halting, you can specify this
+# to always poweroff after this amount of time after calling
+# halt.
+# Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
+# makes it poweroff immediately after halting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWEROFF_AFTER_HALT = 20
+
+# A script or command to power off the box (default undefined)
+# Needed for POWEROFF_ON_ERROR and SUCCESS
+#
+# Example for digital loggers power switch:
+#POWER_OFF = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=OFF'
+#
+# Example for a virtual guest call "Guest".
+#POWER_OFF = virsh destroy Guest
+
+# The way to execute a command on the target
+# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";)
+# The variables SSH_USER, MACHINE and SSH_COMMAND are defined
+#SSH_EXEC = ssh $SSH_USER@$MACHINE $SSH_COMMAND";
+
+# The way to copy a file to the target
+# (default scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE)
+# The variables SSH_USER, MACHINE, SRC_FILE and DST_FILE are defined.
+#SCP_TO_TARGET = scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE
+
+# The nice way to reboot the target
+# (default ssh $SSH_USER@$MACHINE reboot)
+# The variables SSH_USER and MACHINE are defined.
+#REBOOT = ssh $SSH_USER@$MACHINE reboot
+
+#### Per test run options ####
+# The following options are only allowed in TEST_START sections.
+# They are ignored in the DEFAULTS sections.
+#
+# All of these are optional and undefined by default, although
+# some of these options are required for TEST_TYPE of patchcheck
+# and bisect.
+#
+#
+# CHECKOUT = branch
+#
+# If the BUILD_DIR is a git repository, then you can set this option
+# to checkout the given branch before running the TEST. If you
+# specify this for the first run, that branch will be used for
+# all preceding tests until a new CHECKOUT is set.
+#
+#
+#
+# For TEST_TYPE = patchcheck
+#
+# This expects the BUILD_DIR to be a git repository, and
+# will checkout the PATCHCHECK_START commit.
+#
+# The option BUILD_TYPE will be ignored.
+#
+# The MIN_CONFIG will be used for all builds of the patchcheck. The build type
+# used for patchcheck is oldconfig.
+#
+# PATCHCHECK_START is required and is the first patch to
+# test (the SHA1 of the commit). You may also specify anything
+# that git checkout allows (branch name, tage, HEAD~3).
+#
+# PATCHCHECK_END is the last patch to check (default HEAD)
+#
+# PATCHCHECK_TYPE is required and is the type of test to run:
+# build, boot, test.
+#
+# Note, the build test will look for warnings, if a warning occurred
+# in a file that a commit touches, the build will fail.
+#
+# If BUILD_NOCLEAN is set, then make mrproper will not be run on
+# any of the builds, just like all other TEST_TYPE tests. But
+# what makes patchcheck different from the other tests, is if
+# BUILD_NOCLEAN is not set, only the first and last patch run
+# make mrproper. This helps speed up the test.
+#
+# Example:
+# TEST_START
+# TEST_TYPE = patchcheck
+# CHECKOUT = mybranch
+# PATCHCHECK_TYPE = boot
+# PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7
+# PATCHCHECK_END = HEAD~2
+#
+#
+#
+# For TEST_TYPE = bisect
+#
+# You can specify a git bisect if the BUILD_DIR is a git repository.
+# The MIN_CONFIG will be used for all builds of the bisect. The build type
+# used for bisecting is oldconfig.
+#
+# The option BUILD_TYPE will be ignored.
+#
+# BISECT_TYPE is the type of test to perform:
+# build - bad fails to build
+# boot - bad builds but fails to boot
+# test - bad boots but fails a test
+#
+# BISECT_GOOD is the commit (SHA1) to label as good (accepts all git good commit types)
+# BISECT_BAD is the commit to label as bad (accepts all git bad commit types)
+#
+# The above three options are required for a bisect operation.
+#
+# BISECT_REPLAY = /path/to/replay/file (optional, default undefined)
+#
+# If an operation failed in the bisect that was not expected to
+# fail. Then the test ends. The state of the BUILD_DIR will be
+# left off at where the failure occurred. You can examine the
+# reason for the failure, and perhaps even find a git commit
+# that would work to continue with. You can run:
+#
+# git bisect log > /path/to/replay/file
+#
+# The adding:
+#
+# BISECT_REPLAY= /path/to/replay/file
+#
+# And running the test again. The test will perform the initial
+# git bisect start, git bisect good, and git bisect bad, and
+# then it will run git bisect replay on this file, before
+# continuing with the bisect.
+#
+# BISECT_START = commit (optional, default undefined)
+#
+# As with BISECT_REPLAY, if the test failed on a commit that
+# just happen to have a bad commit in the middle of the bisect,
+# and you need to skip it. If BISECT_START is defined, it
+# will checkout that commit after doing the initial git bisect start,
+# git bisect good, git bisect bad, and running the git bisect replay
+# if the BISECT_REPLAY is set.
+#
+# BISECT_REVERSE = 1 (optional, default 0)
+#
+# In those strange instances where it was broken forever
+# and you are trying to find where it started to work!
+# Set BISECT_GOOD to the commit that was last known to fail
+# Set BISECT_BAD to the commit that is known to start working.
+# With BISECT_REVERSE = 1, The test will consider failures as
+# good, and success as bad.
+#
+# BISECT_CHECK = 1 (optional, default 0)
+#
+# Just to be sure the good is good and bad is bad, setting
+# BISECT_CHECK to 1 will start the bisect by first checking
+# out BISECT_BAD and makes sure it fails, then it will check
+# out BISECT_GOOD and makes sure it succeeds before starting
+# the bisect (it works for BISECT_REVERSE too).
+#
+# You can limit the test to just check BISECT_GOOD or
+# BISECT_BAD with BISECT_CHECK = good or
+# BISECT_CHECK = bad, respectively.
+#
+# Example:
+# TEST_START
+# TEST_TYPE = bisect
+# BISECT_GOOD = v2.6.36
+# BISECT_BAD = b5153163ed580e00c67bdfecb02b2e3843817b3e
+# BISECT_TYPE = build
+# MIN_CONFIG = /home/test/config-bisect
+#
+#
+#
+# For TEST_TYPE = config_bisect
+#
+# In those cases that you have two different configs. One of them
+# work, the other does not, and you do not know what config causes
+# the problem.
+# The TEST_TYPE config_bisect will bisect the bad config looking for
+# what config causes the failure.
+#
+# The way it works is this:
+#
+# First it finds a config to work with. Since a different version, or
+# MIN_CONFIG may cause different dependecies, it must run through this
+# preparation.
+#
+# Overwrites any config set in the bad config with a config set in
+# either the MIN_CONFIG or ADD_CONFIG. Thus, make sure these configs
+# are minimal and do not disable configs you want to test:
+# (ie. # CONFIG_FOO is not set).
+#
+# An oldconfig is run on the bad config and any new config that
+# appears will be added to the configs to test.
+#
+# Finally, it generates a config with the above result and runs it
+# again through make oldconfig to produce a config that should be
+# satisfied by kconfig.
+#
+# Then it starts the bisect.
+#
+# The configs to test are cut in half. If all the configs in this
+# half depend on a config in the other half, then the other half
+# is tested instead. If no configs are enabled by either half, then
+# this means a circular dependency exists and the test fails.
+#
+# A config is created with the test half, and the bisect test is run.
+#
+# If the bisect succeeds, then all configs in the generated config
+# are removed from the configs to test and added to the configs that
+# will be enabled for all builds (they will be enabled, but not be part
+# of the configs to examine).
+#
+# If the bisect fails, then all test configs that were not enabled by
+# the config file are removed from the test. These configs will not
+# be enabled in future tests. Since current config failed, we consider
+# this to be a subset of the config that we started with.
+#
+# When we are down to one config, it is considered the bad config.
+#
+# Note, the config chosen may not be the true bad config. Due to
+# dependencies and selections of the kbuild system, mulitple
+# configs may be needed to cause a failure. If you disable the
+# config that was found and restart the test, if the test fails
+# again, it is recommended to rerun the config_bisect with a new
+# bad config without the found config enabled.
+#
+# The option BUILD_TYPE will be ignored.
+#
+# CONFIG_BISECT_TYPE is the type of test to perform:
+# build - bad fails to build
+# boot - bad builds but fails to boot
+# test - bad boots but fails a test
+#
+# CONFIG_BISECT is the config that failed to boot
+#
+# Example:
+# TEST_START
+# TEST_TYPE = config_bisect
+# CONFIG_BISECT_TYPE = build
+# CONFIG_BISECT = /home/test/¢onfig-bad
+# MIN_CONFIG = /home/test/config-min
+#