ARM: n30: Fixup gpiolib calls for mmc power
Move to using gpio_request() and gpio_set_value() for the MMC power
control calls.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index f25275e..dfa09ea 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -88,10 +88,10 @@
{
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
+ gpio_set_value(S3C2410_GPB(3), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
+ gpio_set_value(S3C2410_GPB(3), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@@ -357,11 +357,11 @@
switch (power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
+ gpio_set_value(S3C2410_GPG(4), 1);
break;
case MMC_POWER_OFF:
default:
- s3c2410_gpio_setpin(S3C2410_GPG(4), 0);
+ gpio_set_value(S3C2410_GPG(4), 0);
break;
}
}
@@ -561,6 +561,8 @@
static void __init n30_init(void)
{
+ WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
s3c24xx_fb_set_platdata(&n30_fb_info);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
s3c24xx_mci_set_platdata(&n30_mci_cfg);