Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC Header cleanups from Olof Johansson:
"This is a collection of header file cleanups, mostly for OMAP and
AT91, that keeps moving the platforms in the direction of
multiplatform by removing the need for mach-dependent header files
used in drivers and other places."
Fix up mostly trivial conflicts as per Olof.
* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
ARM: OMAP2+: Move iommu/iovmm headers to platform_data
ARM: OMAP2+: Make some definitions local
ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
ARM: OMAP2+: Move iopgtable header to drivers/iommu/
ARM: OMAP: Merge iommu2.h into iommu.h
atmel: move ATMEL_MAX_UART to platform_data/atmel.h
ARM: OMAP: Remove omap_init_consistent_dma_size()
arm: at91: move at91rm9200 rtc header in drivers/rtc
arm: at91: move reset controller header to arm/arm/mach-at91
arm: at91: move pit define to the driver
arm: at91: move at91_shdwc.h to arch/arm/mach-at91
arm: at91: move board header to arch/arm/mach-at91
arn: at91: move at91_tc.h to arch/arm/mach-at91
arm: at91 move at91_aic.h to arch/arm/mach-at91
arm: at91 move board.h to arch/arm/mach-at91
arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
arm: at91: drop machine defconfig
ARM: OMAP: Remove NEED_MACH_GPIO_H
ARM: OMAP: Remove unnecessary mach and plat includes
...
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 825066e..f24e076 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -945,7 +945,6 @@
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
- select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
deleted file mode 100644
index a8dbc1e..0000000
--- a/arch/arm/configs/afeb9260_defconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_FM3130=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
deleted file mode 100644
index 1457971..0000000
--- a/arch/arm/configs/cam60_defconfig
+++ /dev/null
@@ -1,173 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_CAM60=y
-CONFIG_ZBOOT_ROM_BSS=0x20004000
-CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
deleted file mode 100644
index 921480c..0000000
--- a/arch/arm/configs/cpu9260_defconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_CPU9260=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
deleted file mode 100644
index ea116cb..0000000
--- a/arch/arm/configs/cpu9g20_defconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_CPU9G20=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
deleted file mode 100644
index 42d5db1..0000000
--- a/arch/arm/configs/qil-a9260_defconfig
+++ /dev/null
@@ -1,114 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_EARLY_USART0=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T94=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
deleted file mode 100644
index b4384af..0000000
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ /dev/null
@@ -1,148 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=25
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1553=y
-CONFIG_RTC_DRV_DS1742=y
-CONFIG_RTC_DRV_M48T86=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig
deleted file mode 100644
index b845f55..0000000
--- a/arch/arm/configs/stamp9g20_defconfig
+++ /dev/null
@@ -1,128 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_PORTUXG20=y
-CONFIG_MACH_STAMP9G20=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_GPIO=y
-CONFIG_W1_SLAVE_THERM=y
-CONFIG_W1_SLAVE_DS2431=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
deleted file mode 100644
index a1501e1..0000000
--- a/arch/arm/configs/usb-a9260_defconfig
+++ /dev/null
@@ -1,105 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/at91_aic.h
similarity index 100%
rename from arch/arm/mach-at91/include/mach/at91_aic.h
rename to arch/arm/mach-at91/at91_aic.h
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h
similarity index 100%
rename from arch/arm/mach-at91/include/mach/at91_rstc.h
rename to arch/arm/mach-at91/at91_rstc.h
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h
similarity index 100%
rename from arch/arm/mach-at91/include/mach/at91_shdwc.h
rename to arch/arm/mach-at91/at91_shdwc.h
diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/at91_tc.h
similarity index 100%
rename from arch/arm/mach-at91/include/mach/at91_tc.h
rename to arch/arm/mach-at91/at91_tc.h
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 6cceb42..8ce0682 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -17,11 +17,11 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91rm9200.h>
-#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
+#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 3cee0e6..2a1f8e6 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -18,11 +18,11 @@
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
-#include <mach/board.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index c9e029e..c65e7b8 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -20,10 +20,10 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
-#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
+#include "at91_aic.h"
+#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 414bd85..1f6fac2 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -19,7 +19,6 @@
#include <linux/platform_data/at91_adc.h>
-#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
@@ -27,6 +26,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/at91_adc.h>
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 4d262f3..9d3e9b8 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -19,10 +19,10 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
-#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
+#include "at91_aic.h"
+#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index cd604aa..6ce6d27 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -21,12 +21,12 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <mach/board.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index ed390f6..82deb4d 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -18,10 +18,10 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
-#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
+#include "at91_aic.h"
+#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 9c61e59..fb98163b 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -20,12 +20,12 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <mach/board.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9263_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index ffc0957..358412f 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -20,8 +20,18 @@
#include <asm/mach/time.h>
-#include <mach/at91_pit.h>
+#define AT91_PIT_MR 0x00 /* Mode Register */
+#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
+#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
+#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
+#define AT91_PIT_SR 0x04 /* Status Register */
+#define AT91_PIT_PITS (1 << 0) /* Timer Status */
+
+#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
+#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
+#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index 7af2e10..f039538 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -16,7 +16,7 @@
#include <linux/linkage.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
-#include <mach/at91_rstc.h>
+#include "at91_rstc.h"
.arm
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index c5c2acc..c754b75 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -18,10 +18,10 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
-#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
+#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index fcd233c..e359642 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -26,7 +26,6 @@
#include <video/atmel_lcdc.h>
#include <mach/at91_adc.h>
-#include <mach/board.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
@@ -36,6 +35,7 @@
#include <media/atmel-isi.h>
+#include "board.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
index 9d45718..721a1a3 100644
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -13,8 +13,7 @@
#include <linux/linkage.h>
#include <mach/hardware.h>
#include <mach/at91_ramc.h>
-#include <mach/at91_rstc.h>
-
+#include "at91_rstc.h"
.arm
.globl at91sam9g45_restart
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 70b3a992..5dfc8fd 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -15,8 +15,8 @@
#include <mach/at91sam9n12.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
-#include <mach/board.h>
+#include "board.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index cbe72e4..44e3a63 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -19,10 +19,10 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
-#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
+#include "at91_aic.h"
+#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 5047bdc..160384d 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -17,13 +17,13 @@
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <mach/board.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 3c729f0..dfb2c0c 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -15,8 +15,8 @@
#include <mach/at91sam9x5.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
-#include <mach/board.h>
+#include "board.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index bb7f544..19ca793 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -18,9 +18,10 @@
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
-#include <mach/at91_aic.h>
#include <mach/at91_st.h>
#include <mach/timex.h>
+
+#include "at91_aic.h"
#include "generic.h"
/*
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index ee06d7b..0e57e44 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -26,7 +26,8 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
-#include <mach/at91_tc.h>
+
+#include "at91_tc.h"
#define at91_tc_read(field) \
__raw_readl(AT91_IO_P2V(AT91_TC) + field)
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 22d8856..b99b575 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -34,10 +34,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 93a832f..854b979 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -43,9 +43,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
-
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 477e708..28a18ce 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -38,10 +38,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 71d8f36..c17bb53 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -35,9 +35,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index e71c473..8474324 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -40,12 +40,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2cbd1a2..2a7af78 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -36,12 +36,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
static struct gpio_led cpuat91_leds[] = {
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 3e37437..78e0250 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -38,9 +38,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 872871a..ec0f3ab 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -35,9 +35,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 3b6a948..881170c 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -15,15 +15,14 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
-
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 01f66e9..b489388 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -27,8 +27,9 @@
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
+
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
static void __init at91eb01_init_irq(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 0cfac16..9f5e71c 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -35,9 +35,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
-
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 3d931ff..ef69e0e 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -37,10 +37,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index d93658a..50f3d37 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -24,12 +24,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
static void __init eco920_init_early(void)
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index fa98aba..5d44eba 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -33,9 +33,9 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
static void __init flexibity_init_early(void)
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 6e47071..191d37c 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -41,10 +41,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index a9d5e78..23a2fa1 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -30,14 +30,14 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/gsia18s.h>
-#include <mach/stamp9g20.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gsia18s.h"
+#include "stamp9g20.h"
static void __init gsia18s_init_early(void)
{
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 86050da..9a43d1e 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -34,10 +34,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/cpu.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index abe9fed..f168bec 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -35,12 +35,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
#include <mach/cpu.h>
-#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 6960778..bc7a1c4 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -44,10 +44,10 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 9ca3e32..0299554 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -29,13 +29,13 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/stamp9g20.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "stamp9g20.h"
static void __init pcontrol_g20_init_early(void)
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index f83e1de..4938f1c 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -37,11 +37,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 799f214..33b1628 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -40,11 +40,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 66338e7..9e5061b 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -39,11 +39,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 5d1b572..58277db 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -39,11 +39,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index a0ecf04..2e8b833 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -25,11 +25,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <linux/gpio.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
static void __init rsi_ews_init_early(void)
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index c5f01ac..b75fbf6 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -37,10 +37,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 8cd6e67..f0135cd 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -41,12 +41,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index a9167dd..13ebaa8 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -45,12 +45,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b87dbe2..89b9608 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -44,12 +44,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 3ab2b86..7b51238 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -43,11 +43,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
#include <mach/system_rev.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 3d48ec1..e4cc375 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -42,12 +42,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
#include <mach/system_rev.h>
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index fb89ea9..377a109 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -30,11 +30,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
+
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index a4e031a..9877150 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -32,10 +32,10 @@
#include <asm/mach/arch.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index c3fb31d..48a962b 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -25,10 +25,10 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
+#include "at91_aic.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 6ea069b..c1060f9 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -41,11 +41,11 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
+#include "at91_aic.h"
+#include "at91_shdwc.h"
+#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index f162fdf..8673aeb 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -43,12 +43,12 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91_aic.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
#include <mach/cpu.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/board.h
similarity index 69%
rename from arch/arm/mach-at91/include/mach/board.h
rename to arch/arm/mach-at91/board.h
index a0d92a9..4a234fb 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/board.h
@@ -31,42 +31,15 @@
#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-#include <linux/atmel-mci.h>
-#include <sound/atmel-ac97c.h>
-#include <linux/serial.h>
-#include <linux/platform_data/macb.h>
#include <linux/platform_data/atmel.h>
/* USB Device */
-struct at91_udc_data {
- int vbus_pin; /* high == host powering us */
- u8 vbus_active_low; /* vbus polarity */
- u8 vbus_polled; /* Use polling, not interrupt */
- int pullup_pin; /* active == D+ pulled up */
- u8 pullup_active_low; /* true == pullup_pin is active low */
-};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
/* USB High Speed Device */
extern void __init at91_add_device_usba(struct usba_platform_data *data);
/* Compact Flash */
-struct at91_cf_data {
- int irq_pin; /* I/O IRQ */
- int det_pin; /* Card detect */
- int vcc_pin; /* power switching */
- int rst_pin; /* card reset */
- u8 chipselect; /* EBI Chip Select number */
- u8 flags;
-#define AT91_CF_TRUE_IDE 0x01
-#define AT91_IDE_SWAP_A0_A2 0x02
-};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
@@ -76,16 +49,6 @@
extern void __init at91_add_device_eth(struct macb_platform_data *data);
/* USB Host */
-#define AT91_MAX_USBH_PORTS 3
-struct at91_usbh_data {
- int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */
- int overcurrent_pin[AT91_MAX_USBH_PORTS];
- u8 ports; /* number of ports on root hub */
- u8 overcurrent_supported;
- u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
- u8 overcurrent_status[AT91_MAX_USBH_PORTS];
- u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
-};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
@@ -114,13 +77,6 @@
extern struct platform_device *atmel_default_console_device;
-struct atmel_uart_data {
- int num; /* port num */
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virt. base address, if any */
- struct serial_rs485 rs485; /* rs485 settings */
-};
extern void __init at91_add_device_serial(void);
/*
@@ -163,24 +119,13 @@
bool use_pck_as_mck);
/* Touchscreen Controller */
-struct at91_tsadcc_data {
- unsigned int adc_clock;
- u8 pendet_debounce;
- u8 ts_sample_hold_time;
-};
extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
/* CAN */
-struct at91_can_data {
- void (*transceiver_switch)(int on);
-};
extern void __init at91_add_device_can(struct at91_can_data *data);
/* LEDs */
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
#endif
diff --git a/arch/arm/mach-at91/include/mach/gsia18s.h b/arch/arm/mach-at91/gsia18s.h
similarity index 100%
rename from arch/arm/mach-at91/include/mach/gsia18s.h
rename to arch/arm/mach-at91/gsia18s.h
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
deleted file mode 100644
index d1f80ad..0000000
--- a/arch/arm/mach-at91/include/mach/at91_pit.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pit.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR 0x00 /* Mode Register */
-#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
-#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
-#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
-
-#define AT91_PIT_SR 0x04 /* Status Register */
-#define AT91_PIT_PITS (1 << 0) /* Timer Status */
-
-#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
-#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
-#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
-#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 711a789..a832e07 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -90,9 +90,6 @@
#define AT91_SRAM_MAX SZ_1M
#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-/* Serial ports */
-#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
-
/* External Memory Map */
#define AT91_CHIPSELECT_0 0x10000000
#define AT91_CHIPSELECT_1 0x20000000
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index febc2ee..8e21026 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -42,7 +42,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <mach/at91_aic.h>
+#include "at91_aic.h"
void __iomem *at91_aic_base;
static struct irq_domain *at91_aic_domain;
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 1b1e62b..3e22978 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -15,7 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/board.h>
+#include "board.h"
/* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5315f05..adb6db8 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -25,10 +25,10 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/at91_aic.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
+#include "at91_aic.h"
#include "generic.h"
#include "pm.h"
@@ -36,8 +36,8 @@
* Show the reason for the previous system reset.
*/
-#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
+#include "at91_rstc.h"
+#include "at91_shdwc.h"
static void __init show_reset_status(void)
{
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 19cdd0b..9ee866c 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -19,8 +19,8 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91_pmc.h>
-#include <mach/at91_shdwc.h>
+#include "at91_shdwc.h"
#include "soc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/stamp9g20.h
similarity index 100%
rename from arch/arm/mach-at91/include/mach/stamp9g20.h
rename to arch/arm/mach-at91/stamp9g20.h
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index cd169c3..f0e69cb 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,8 @@
#
# Common support
-obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
+ serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e255164..a8fce3c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -625,7 +625,6 @@
.atag_offset = 0x100,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4b6de70..e067f22 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -27,16 +27,16 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
/* fsample is pretty close to p2-sample */
@@ -123,9 +123,9 @@
static void __init fsample_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
@@ -362,7 +362,6 @@
.atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 4ec579f..608e7d2 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -81,7 +81,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index e1362ce..7119ef2 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -13,12 +13,11 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
-
+#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
-
#include "board-h2.h"
+#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 376f7f2..9134b64 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -39,8 +39,8 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/flash.h>
@@ -50,6 +50,7 @@
#include "common.h"
#include "board-h2.h"
+#include "dma.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
@@ -458,7 +459,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index c74daac..17d7791 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,9 +16,8 @@
#include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
-
#include "board-h3.h"
+#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index ededdb7..bf213d1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -41,9 +41,9 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/flash.h>
#include <mach/hardware.h>
@@ -452,7 +452,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 87ab208..356f816 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -43,7 +43,7 @@
#include <asm/mach/arch.h>
#include <mach/omap7xx.h>
-#include <plat/mmc.h>
+#include "mmc.h"
#include <mach/irqs.h>
#include <mach/usb.h>
@@ -600,7 +600,6 @@
.atag_offset = 0x100,
.map_io = htcherald_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index db5f7d2..f8033fa 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -33,16 +33,15 @@
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
-#include <plat/mmc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
+#include "mmc.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
@@ -215,7 +214,7 @@
static int innovator_get_pendown_state(void)
{
- return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+ return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
}
static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +278,7 @@
static void __init innovator_init_smc91x(void)
{
if (cpu_is_omap1510()) {
- fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
OMAP1510_FPGA_RST);
udelay(750);
} else {
@@ -335,10 +334,10 @@
int vdd)
{
if (power_on)
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
OMAP1510_FPGA_POWER);
else
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
OMAP1510_FPGA_POWER);
return 0;
@@ -390,14 +389,14 @@
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM1_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM2_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +436,7 @@
*/
static void __init innovator_map_io(void)
{
+#ifdef CONFIG_ARCH_OMAP15XX
omap15xx_map_io();
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +444,10 @@
/* Dump the Innovator FPGA rev early - useful info for support. */
pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510_FPGA_REV_HIGH),
- fpga_read(OMAP1510_FPGA_REV_LOW),
- fpga_read(OMAP1510_FPGA_BOARD_REV));
+ __raw_readb(OMAP1510_FPGA_REV_HIGH),
+ __raw_readb(OMAP1510_FPGA_REV_LOW),
+ __raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
@@ -454,7 +455,6 @@
.atag_offset = 0x100,
.map_io = innovator_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7d5c06d..3e8ead6 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -29,13 +29,13 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
+#include "clock.h"
+#include "mmc.h"
#define ADS7846_PENDOWN_GPIO 15
@@ -251,7 +251,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5973945..872ea47 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -48,7 +48,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@@ -606,7 +606,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 1c578d5..584b6fa 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -36,8 +36,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
@@ -264,7 +265,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 9715809..fbc986b 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -28,16 +28,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/led.h>
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
@@ -310,7 +311,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e311032..60d917a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -38,8 +38,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@@ -47,6 +47,7 @@
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6
@@ -326,7 +327,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 198b054..9a7e483 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -28,15 +28,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
@@ -231,9 +231,9 @@
static void __init perseus2_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
@@ -324,7 +324,6 @@
.atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5932d56..4fcf19c 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -16,9 +16,10 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
-#include <plat/mmc.h>
#include <mach/board-sx1.h>
+#include "mmc.h"
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 13bf2cc..1ebc7e0 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -36,15 +36,16 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -403,7 +404,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index ad75e34..abf705f 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -34,7 +34,7 @@
#include <mach/board-voiceblue.h>
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@@ -286,7 +286,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638f407..4f5fd4a 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
@@ -21,21 +22,21 @@
#include <asm/mach-types.h>
-#include <plat/cpu.h>
-#include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
-
#include <mach/hardware.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "opp.h"
+#include "sram.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
/*
* Omap1 specific clock functions
*/
@@ -607,3 +608,497 @@
}
#endif
+
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ pr_err("Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
+ omap1_clk_disable(clk);
+
+out:
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_set_rate(clk, rate);
+ if (ret == 0)
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+ get_option(&str, &mpurate);
+
+ if (!mpurate)
+ return 1;
+
+ if (mpurate < 1000)
+ mpurate *= 1000000;
+
+ return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+ return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
+ mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
+ list_add(&clk->node, &clocks);
+ if (clk->init)
+ clk->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clocks, node)
+ if (clkp->flags & ENABLE_ON_INIT)
+ clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || !ck->enable_reg)
+ continue;
+
+ omap1_clk_disable_unused(ck);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ mutex_lock(&clocks_mutex);
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate,
+ c->usecount);
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d;
+ struct clk *pa = c->parent;
+
+ d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 3d04f4f..1e4918a 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -14,8 +14,184 @@
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
#include <linux/clk.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+
+struct module;
+struct clk;
+
+struct omap_clk {
+ u16 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310 (1 << 0)
+#define CK_7XX (1 << 1) /* 7xx, 850 */
+#define CK_1510 (1 << 2)
+#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
+#define CK_1710 (1 << 4) /* 1710 extra for rate selection */
+
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ u8 rate_offset;
+ u8 src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
int omap1_clk_init(void);
void omap1_clk_late_init(void);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 9b45f4b..cb7c6ae 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,16 +22,14 @@
#include <asm/mach-types.h> /* for machine_is_* */
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
+#include "soc.h"
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
+#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
@@ -765,14 +763,6 @@
* init
*/
-static struct clk_functions omap1_clk_functions = {
- .clk_enable = omap1_clk_enable,
- .clk_disable = omap1_clk_disable,
- .clk_round_rate = omap1_clk_round_rate,
- .clk_set_rate = omap1_clk_set_rate,
- .clk_disable_unused = omap1_clk_disable_unused,
-};
-
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@@ -803,8 +793,6 @@
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
- clk_init(&omap1_clk_functions);
-
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index c2552b2..dab2e10 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -26,8 +26,10 @@
#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
-#include <plat/common.h>
#include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+
+#include <plat/i2c.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
@@ -38,6 +40,7 @@
#endif
#ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
void omap15xx_map_io(void);
#else
static inline void omap15xx_map_io(void)
@@ -90,4 +93,6 @@
static inline int ocpi_enable(void) { return 0; }
#endif
+extern int omap1_get_reset_sources(void);
+
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index d3fec92..7155ed8 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -19,10 +19,8 @@
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
#include <mach/omap7xx.h>
#include <mach/camera.h>
@@ -30,6 +28,9 @@
#include "common.h"
#include "clock.h"
+#include "dma.h"
+#include "mmc.h"
+#include "sram.h"
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
@@ -175,6 +176,13 @@
res[3].name = "tx";
res[3].flags = IORESOURCE_DMA;
+ if (cpu_is_omap7xx())
+ data->slots[0].features = MMC_OMAP7XX;
+ if (cpu_is_omap15xx())
+ data->slots[0].features = MMC_OMAP15XX;
+ if (cpu_is_omap16xx())
+ data->slots[0].features = MMC_OMAP16XX;
+
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret == 0)
ret = platform_device_add_data(pdev, data, sizeof(*data));
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 29007fe..978aed8 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -25,11 +25,13 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irqs.h>
+#include "dma.h"
+
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
#define OMAP1_DMA_STRIDE 0x40
@@ -319,6 +321,9 @@
d->dev_caps = ENABLE_1510_MODE;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+ if (cpu_is_omap16xx())
+ d->dev_caps = ENABLE_16XX_MODE;
+
d->dev_caps |= SRC_PORT;
d->dev_caps |= DST_PORT;
d->dev_caps |= SRC_INDEX;
diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h
new file mode 100644
index 0000000..da6345d
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.h
@@ -0,0 +1,83 @@
+/*
+ * OMAP1 DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP1_DMA_CHANNEL_H
+#define __OMAP1_DMA_CHANNEL_H
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE 0
+#define OMAP_DMA_MCSI1_TX 1
+#define OMAP_DMA_MCSI1_RX 2
+#define OMAP_DMA_I2C_RX 3
+#define OMAP_DMA_I2C_TX 4
+#define OMAP_DMA_EXT_NDMA_REQ 5
+#define OMAP_DMA_EXT_NDMA_REQ2 6
+#define OMAP_DMA_UWIRE_TX 7
+#define OMAP_DMA_MCBSP1_TX 8
+#define OMAP_DMA_MCBSP1_RX 9
+#define OMAP_DMA_MCBSP3_TX 10
+#define OMAP_DMA_MCBSP3_RX 11
+#define OMAP_DMA_UART1_TX 12
+#define OMAP_DMA_UART1_RX 13
+#define OMAP_DMA_UART2_TX 14
+#define OMAP_DMA_UART2_RX 15
+#define OMAP_DMA_MCBSP2_TX 16
+#define OMAP_DMA_MCBSP2_RX 17
+#define OMAP_DMA_UART3_TX 18
+#define OMAP_DMA_UART3_RX 19
+#define OMAP_DMA_CAMERA_IF_RX 20
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_NAND 23
+#define OMAP_DMA_IRQ_LCD_LINE 24
+#define OMAP_DMA_MEMORY_STICK 25
+#define OMAP_DMA_USB_W2FC_RX0 26
+#define OMAP_DMA_USB_W2FC_RX1 27
+#define OMAP_DMA_USB_W2FC_RX2 28
+#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_TX1 30
+#define OMAP_DMA_USB_W2FC_TX2 31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN 32
+#define OMAP_DMA_SPI_TX 33
+#define OMAP_DMA_SPI_RX 34
+#define OMAP_DMA_CRYPTO_HASH 35
+#define OMAP_DMA_CCP_ATTN 36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+#define OMAP_DMA_CRYPTO_DES_OUT 56
+
+#endif /* __OMAP1_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 73ae616..b3fb531 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -10,7 +10,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/flash.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 29ec50f..8bd71b2 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,11 +27,11 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <plat/fpga.h>
-
#include <mach/hardware.h>
#include "iomap.h"
+#include "common.h"
+#include "fpga.h"
static void fpga_mask_irq(struct irq_data *d)
{
diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h
new file mode 100644
index 0000000..4b4307a
--- /dev/null
+++ b/arch/arm/mach-omap1/fpga.h
@@ -0,0 +1,52 @@
+/*
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
+#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
+#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
+/* cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
+
+#endif
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 98e6f39..02b3eb2 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 33f4192..b9952a2 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
#define OMAP1610_GPIO3_BASE 0xfffbb400
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 958ce9a..f5819b2 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
#define OMAP7XX_GPIO3_BASE 0xfffbd000
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index a0551a6..faca808 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,11 +19,25 @@
*
*/
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
#include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
-void __init omap1_i2c_mux_pins(int bus_id)
+#include <plat/i2c.h>
+
+#define OMAP_I2C_SIZE 0x3f
+#define OMAP1_I2C_BASE 0xfffb3800
+#define OMAP1_INT_I2C (32 + 4)
+
+static const char name[] = "omap_i2c";
+
+static struct resource i2c_resources[2] = {
+};
+
+static struct platform_device omap_i2c_devices[1] = {
+};
+
+static void __init omap1_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap7xx()) {
omap_cfg_reg(I2C_7XX_SDA);
@@ -33,3 +47,47 @@
omap_cfg_reg(I2C_SCL);
}
}
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+ int bus_id)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+
+ if (bus_id > 1)
+ return -EINVAL;
+
+ omap1_i2c_mux_pins(bus_id);
+
+ pdev = &omap_i2c_devices[bus_id - 1];
+ pdev->id = bus_id;
+ pdev->name = name;
+ pdev->num_resources = ARRAY_SIZE(i2c_resources);
+ res = i2c_resources;
+ res[0].start = OMAP1_I2C_BASE;
+ res[0].end = res[0].start + OMAP_I2C_SIZE;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = OMAP1_INT_I2C;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->resource = res;
+
+ /* all OMAP1 have IP version 1 register set */
+ pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+ /* all OMAP1 I2C are implemented like this */
+ pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+ /* how the cpu bus is wired up differs for 7xx only */
+
+ if (cpu_is_omap7xx())
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+ else
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
+ pdev->dev.platform_data = pdata;
+
+ return platform_device_register(pdev);
+}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a1b846a..52de382 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <asm/system_info.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 2b36a28..5c1a26c 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include "serial.h"
.pushsection .data
omap_uart_phys: .word 0x0
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index 88f08ca..78a8c6c 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -13,8 +13,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include "../../iomap.h"
-
.macro get_irqnr_preamble, base, tmp
.endm
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
deleted file mode 100644
index ebf86c0..0000000
--- a/arch/arm/mach-omap1/include/mach/gpio.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/gpio.h
- */
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 84248d2..5875a50 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -39,7 +39,7 @@
#include <asm/sizes.h>
#ifndef __ASSEMBLER__
#include <asm/types.h>
-#include <plat/cpu.h>
+#include <mach/soc.h>
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
@@ -51,7 +51,7 @@
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
-#include <plat/tc.h>
+#include <mach/tc.h>
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
@@ -72,7 +72,10 @@
#endif /* ifndef __ASSEMBLER__ */
-#include <plat/serial.h>
+#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#include <mach/serial.h>
/*
* ---------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 901082d..3c25305 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -19,7 +19,7 @@
* because of the strncmp().
*/
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include <mach/soc.h>
/*
* OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 8fe05d6..3d23524 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -45,5 +45,118 @@
#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
+#define OMAP1510_FPGA_SIZE SZ_4K
+#define OMAP1510_FPGA_START 0x08000000 /* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE 0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
+#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
+#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
+#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h
new file mode 100644
index 0000000..2ce6a2d
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/serial.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
new file mode 100644
index 0000000..6cf9c1c
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@@ -0,0 +1,229 @@
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap16xx
+# endif
+#endif
+
+/*
+ * omap_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx(): True for OMAP730, OMAP850
+ * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS (omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310(): True for OMAP310
+ * cpu_is_omap1510(): True for OMAP1510
+ * cpu_is_omap1610(): True for OMAP1610
+ * cpu_is_omap1611(): True for OMAP1611
+ * cpu_is_omap5912(): True for OMAP5912
+ * cpu_is_omap1621(): True for OMAP1621
+ * cpu_is_omap1710(): True for OMAP1710
+ */
+#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+
+#define cpu_is_omap310() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap5912() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap44xx() 0
+#define soc_is_omap54xx() 0
+#define soc_is_am33xx() 0
+#define cpu_class_is_omap1() 1
+#define cpu_class_is_omap2() 0
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap310
+# undef cpu_is_omap1510
+# define cpu_is_omap310() is_omap310()
+# define cpu_is_omap1510() is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap1610
+# undef cpu_is_omap1611
+# undef cpu_is_omap5912
+# undef cpu_is_omap1621
+# undef cpu_is_omap1710
+# define cpu_is_omap1610() is_omap1610()
+# define cpu_is_omap1611() is_omap1611()
+# define cpu_is_omap5912() is_omap5912()
+# define cpu_is_omap1621() is_omap1621()
+# define cpu_is_omap1710() is_omap1710()
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/mach-omap1/include/mach/tc.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/tc.h
rename to arch/arm/mach-omap1/include/mach/tc.h
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index 0ff22dc..ad6fbe7 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -1,5 +1,122 @@
/*
- * arch/arm/mach-omap1/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include "serial.h"
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP7XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP1UART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap7xx/8xx based boards using UART1 with shift 0 */
+ DEBUG_LL_OMAP7XX(1, herald);
+ DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+ /* omap15xx/16xx based boards using UART1 */
+ DEBUG_LL_OMAP1(1, ams_delta);
+ DEBUG_LL_OMAP1(1, nokia770);
+ DEBUG_LL_OMAP1(1, omap_h2);
+ DEBUG_LL_OMAP1(1, omap_h3);
+ DEBUG_LL_OMAP1(1, omap_innovator);
+ DEBUG_LL_OMAP1(1, omap_osk);
+ DEBUG_LL_OMAP1(1, omap_palmte);
+ DEBUG_LL_OMAP1(1, omap_palmz71);
+
+ /* omap15xx/16xx based boards using UART2 */
+ DEBUG_LL_OMAP1(2, omap_palmtt);
+
+ /* omap15xx/16xx based boards using UART3 */
+ DEBUG_LL_OMAP1(3, sx1);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6a5baab..5a3b806 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -17,8 +17,8 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
#include "iomap.h"
#include "common.h"
@@ -134,7 +134,6 @@
*/
omap1_clk_init();
omap1_mux_init();
- omap_init_consistent_dma_size();
}
void __init omap1_init_late(void)
diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h
index 330c471..f4e2d7a 100644
--- a/arch/arm/mach-omap1/iomap.h
+++ b/arch/arm/mach-omap1/iomap.h
@@ -22,9 +22,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
-
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6995fb6..122ef67 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -45,7 +45,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index ed42628..7ed8c18 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,11 +27,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>
+#include "dma.h"
+
int omap_lcd_dma_running(void)
{
/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index bdc2e75..c6d8fdf 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,14 +19,15 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <mach/irqs.h>
#include "iomap.h"
+#include "dma.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
new file mode 100644
index 0000000..39c2b13
--- /dev/null
+++ b/arch/arm/mach-omap1/mmc.h
@@ -0,0 +1,18 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP15XX_NR_MMC 1
+#define OMAP16XX_NR_MMC 2
+#define OMAP1_MMC_SIZE 0x080
+#define OMAP1_MMC1_BASE 0xfffb7800
+#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
index 9cd4ddb..8dcebe6 100644
--- a/arch/arm/mach-omap1/opp_data.c
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
-#include <plat/clkdev_omap.h>
+#include "clock.h"
#include "opp.h"
/*-------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 47ec161..66d663a 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -44,23 +44,23 @@
#include <linux/io.h>
#include <linux/atomic.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>
#include "iomap.h"
+#include "clock.h"
#include "pm.h"
+#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 7868e75..3f2d396 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -19,8 +19,7 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "soc.h"
#ifdef CONFIG_PM_RUNTIME
static int omap1_pm_runtime_suspend(struct device *dev)
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index b177091..a0a9f97 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -10,6 +10,19 @@
#include "common.h"
+/* ARM_SYSST bit shifts related to SoC reset sources */
+#define ARM_SYSST_POR_SHIFT 5
+#define ARM_SYSST_EXT_RST_SHIFT 4
+#define ARM_SYSST_ARM_WDRST_SHIFT 2
+#define ARM_SYSST_GLOB_SWRST_SHIFT 1
+
+/* Standardized reset source bits (across all OMAP SoCs) */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
+
+
void omap1_restart(char mode, const char *cmd)
{
/*
@@ -23,3 +36,28 @@
omap_writew(1, ARM_RSTCT1);
}
+
+/**
+ * omap1_get_reset_sources - return the source of the SoC's last reset
+ *
+ * Returns bits that represent the last reset source for the SoC. The
+ * format is standardized across OMAPs for use by the OMAP watchdog.
+ */
+int omap1_get_reset_sources(void)
+{
+ int ret = 0;
+ u16 rs;
+
+ rs = __raw_readw(ARM_SYSST);
+
+ if (rs & (1 << ARM_SYSST_POR_SHIFT))
+ ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
+ ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
+ ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
+ ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
+
+ return ret;
+}
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b9d6834..d1ac080 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -23,7 +23,6 @@
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include "pm.h"
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 0e62874..a908c51 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -36,6 +36,8 @@
#include <asm/assembler.h>
+#include <mach/hardware.h>
+
#include "iomap.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
new file mode 100644
index 0000000..69daf01
--- /dev/null
+++ b/arch/arm/mach-omap1/soc.h
@@ -0,0 +1,4 @@
+/*
+ * We can move mach/soc.h here once the drivers are fixed
+ */
+#include <mach/soc.h>
diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c
new file mode 100644
index 0000000..6431b0f
--- /dev/null
+++ b/arch/arm/mach-omap1/sram-init.c
@@ -0,0 +1,76 @@
+/*
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "sram.h"
+
+#define OMAP1_SRAM_PA 0x20000000
+#define SRAM_BOOTLOADER_SZ 0x80
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_and_map_sram(void)
+{
+ unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
+ unsigned long omap_sram_start = OMAP1_SRAM_PA;
+ unsigned long omap_sram_size;
+
+ if (cpu_is_omap7xx())
+ omap_sram_size = 0x32000; /* 200K */
+ else if (cpu_is_omap15xx())
+ omap_sram_size = 0x30000; /* 192K */
+ else if (cpu_is_omap1610() || cpu_is_omap1611() ||
+ cpu_is_omap1621() || cpu_is_omap1710())
+ omap_sram_size = 0x4000; /* 16K */
+ else {
+ pr_err("Could not detect SRAM size\n");
+ omap_sram_size = 0x4000;
+ }
+
+ omap_map_sram(omap_sram_start, omap_sram_size,
+ omap_sram_skip, 1);
+}
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+ BUG_ON(!_omap_sram_reprogram_clock);
+ /* On 730, bit 13 must always be 1 */
+ if (cpu_is_omap7xx())
+ ckctl |= 0x2000;
+ _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+int __init omap_sram_init(void)
+{
+ omap_detect_and_map_sram();
+ _omap_sram_reprogram_clock =
+ omap_sram_push(omap1_sram_reprogram_clock,
+ omap1_sram_reprogram_clock_sz);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h
new file mode 100644
index 0000000..d5a6c83
--- /dev/null
+++ b/arch/arm/mach-omap1/sram.h
@@ -0,0 +1,7 @@
+#include <plat/sram.h>
+
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 7452954..8936819 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -50,6 +50,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 84267ed..104fed36 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -301,7 +301,7 @@
#endif
-u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
+static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
@@ -409,7 +409,7 @@
return syscon1 << 16;
}
-u32 __init omap1_usb1_init(unsigned nwires)
+static u32 __init omap1_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
@@ -475,7 +475,7 @@
return syscon1 << 20;
}
-u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
{
u32 syscon1 = 0;
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fe40d9e..d5e834a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,30 +4,37 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
+ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+ omap_device.o sram.o
-# INTCPS IP block support - XXX should be moved to drivers/
-obj-$(CONFIG_ARCH_OMAP2) += irq.o
-obj-$(CONFIG_ARCH_OMAP3) += irq.o
-obj-$(CONFIG_SOC_AM33XX) += irq.o
+omap-2-3-common = irq.o
+hwmod-common = omap_hwmod.o \
+ omap_hwmod_common_data.o
+clock-common = clock.o clock_common_data.o \
+ clkt_dpll.o clkt_clksel.o
+secure-common = omap-smc.o omap-secure.o
-# Secure monitor API support
-obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
-obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
-obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o
+omap-4-5-common = omap4-common.o omap-wakeupgen.o \
+ sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -52,7 +59,6 @@
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
@@ -63,15 +69,16 @@
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
-obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -83,76 +90,82 @@
endif
ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
endif
# PRCM
-obj-y += prcm.o prm_common.o
-obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y += prcm.o prm_common.o cm_common.o
+obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o
omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
prcm_mpu44xx.o prminst44xx.o \
- vc44xx_data.o vp44xx_data.o \
- prm44xx.o
+ vc44xx_data.o vp44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
# OMAP voltage domains
-obj-y += voltage.o vc.o vp.o
+voltagedomain-common := voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
# OMAP powerdomain framework
-obj-y += powerdomain.o powerdomain-common.o
+powerdomain-common += powerdomain.o powerdomain-common.o
+obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
# PRCM clockdomain control
-obj-y += clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
+clockdomain-common += clockdomain.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
# Clock framework
-obj-y += clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
-obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
@@ -160,7 +173,6 @@
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
-obj-y += omap_hwmod_common_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
@@ -184,8 +196,6 @@
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
-obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
-
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
obj-y += $(iommu-m) $(iommu-y)
@@ -206,10 +216,10 @@
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index d0c54c5..af11dcd 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/davinci_emac.h>
#include <asm/system.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "am35xx.h"
#include "control.h"
#include "am35xx-emac.h"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 95b384d..d1c0162 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -28,14 +28,12 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
#include <video/omapdss.h>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 96cd369..79fd904 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -30,15 +30,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
+#include "soc.h"
#include "board-flash.h"
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index fc224ad..81871b1 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -18,9 +18,8 @@
#include "common.h"
#include "gpmc-smc91x.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 3669c12..fd80d97 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -27,6 +27,7 @@
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
+#include <linux/usb/musb.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
@@ -34,8 +35,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
#include "omap4-keypad.h"
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
@@ -45,6 +44,7 @@
#include "soc.h"
#include "mux.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 318fead..603503c 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include "am35xx-emac.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index e162897..96d6c5a 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -25,6 +25,7 @@
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
+#include <linux/usb/musb.h>
#include <linux/platform_data/gpio-omap.h>
#include "am35xx.h"
@@ -33,7 +34,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index cea3aba..64cf1bd 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -28,14 +28,14 @@
#include <linux/clk.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
+#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <plat/led.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 376d26e..a8cad22 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -38,21 +38,19 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/hardware.h>
-
+#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-nand.h"
#define CM_T35_GPIO_PENDOWN 57
#define SB_T35_USB_HUB_RESET_GPIO 167
@@ -181,7 +179,7 @@
static void __init cm_t35_init_nand(void)
{
- if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+ if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
pr_err("CM-T35: Unable to register NAND device\n");
}
#else
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 59c0a45..2786647 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -39,9 +39,8 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "am35xx.h"
@@ -49,6 +48,7 @@
#include "control.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
+#include "gpmc-nand.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@@ -240,7 +240,7 @@
static void __init cm_t3517_init_nand(void)
{
- if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+ if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
pr_err("CM-T3517: NAND initialization failed\n");
}
#else
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 1fd161e..933479e 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -39,9 +39,8 @@
#include <asm/mach/flash.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
@@ -55,8 +54,11 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
@@ -621,8 +623,9 @@
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
- ARRAY_SIZE(devkit8000_nand_partitions));
+ board_nand_init(devkit8000_nand_partitions,
+ ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index e642acf..c33adea 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -17,14 +17,14 @@
#include <linux/mtd/physmap.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <plat/tc.h>
+#include "soc.h"
#include "common.h"
#include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
@@ -104,36 +104,35 @@
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+ {
+ .sync_clk = 0,
- .sync_clk = 0,
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
+ .we_off = 30,
+ .oe_off = 48,
- .we_off = 30,
- .oe_off = 48,
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
+ },
};
-static struct omap_nand_platform_data board_nand_data = {
- .gpmc_t = &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
void
-__init board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+ int nand_type, struct gpmc_timings *gpmc_t)
{
board_nand_data.cs = cs;
board_nand_data.parts = nand_parts;
@@ -141,7 +140,7 @@
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
- gpmc_nand_init(&board_nand_data);
+ gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -238,5 +237,6 @@
pr_err("NAND: Unable to find configuration in GPMC\n");
else
board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs, nand_type);
+ partition_info[2].nr_parts, nandcs,
+ nand_type, nand_default_timings);
}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c44b70d..2fb5d41 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -12,7 +12,7 @@
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#define PDC_NOR 1
#define PDC_NAND 2
@@ -40,12 +40,14 @@
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type);
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
#else
static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
{
}
+#define nand_default_timings NULL
#endif
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8d04bf8..8668c72 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -26,15 +26,14 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/menelaus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/menelaus.h>
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include "debug-devices.h"
+#include <plat-omap/dma-omap.h>
+#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
@@ -42,6 +41,7 @@
#include "common.h"
#include "mux.h"
#include "control.h"
+#include "gpmc.h"
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 3785906..549080c 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -29,20 +29,19 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
-
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include "common.h"
+#include "gpmc.h"
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
#include "board-flash.h"
#include "control.h"
+#include "gpmc-onenand.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
@@ -175,7 +174,7 @@
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
- 0, NAND_BUSWIDTH_16);
+ 0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ee8c3cf..1164b10 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -35,9 +35,8 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/gpmc.h>
-#include <mach/board-zoom.h>
-#include <plat/usb.h>
+#include "board-zoom.h"
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
@@ -420,8 +419,8 @@
omap_serial_init();
omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
- board_nand_init(ldp_nand_partitions,
- ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+ board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+ ZOOM_NAND_CS, 0, nand_default_timings);
omap_hsmmc_init(mmc);
ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index d95f727..e3efcb8 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -22,16 +22,17 @@
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "common.h"
-#include <plat/menelaus.h>
-#include <plat/mmc.h>
+#include "mmc.h"
#include "mux.h"
+#include "gpmc-onenand.h"
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index d41ab98..5a3800d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -39,19 +39,22 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
+#include "soc.h"
#include "mux.h"
#include "hsmmc.h"
#include "pm.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -518,8 +521,9 @@
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions));
+ board_nand_init(omap3beagle_nand_partitions,
+ ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure msecure is mux'd to be able to set the RTC. */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b9b776b..3c0b9a9 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -32,6 +32,7 @@
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/smsc911x.h>
@@ -45,17 +46,20 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
+#include "soc.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "board-flash.h"
+
+#define NAND_CS 0
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
@@ -731,8 +735,9 @@
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
- ARRAY_SIZE(omap3evm_nand_partitions));
+ board_nand_init(omap3evm_nand_partitions,
+ ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7bd8253..e84e2a8 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -34,16 +34,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "gpmc-smsc911x.h"
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/usb.h>
-
#include "common.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-smsc911x.h"
#define OMAP3LOGIC_SMSC911X_CS 1
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 00a1f4a..ce31bd3 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -42,7 +42,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -50,6 +49,7 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc-nand.h"
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
@@ -602,7 +602,7 @@
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init(&usbhs_bdata);
usb_musb_init(NULL);
- gpmc_nand_init(&pandora_nand_data);
+ gpmc_nand_init(&pandora_nand_data, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 731235e..ba11245 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -40,9 +40,8 @@
#include <asm/mach/flash.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 944ffc4..a225d81 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -44,12 +44,12 @@
#include <asm/system_info.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#include <asm/setup.h>
@@ -59,6 +59,8 @@
#define TB_BL_PWM_TIMER 9
#define TB_KILL_POWER_GPIO 168
+#define NAND_CS 0
+
static unsigned long touchbook_revision;
static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -365,8 +367,9 @@
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
- ARRAY_SIZE(omap3touchbook_nand_partitions));
+ board_nand_init(omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index bfcd397..8c00b99 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -29,6 +29,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/ti_wilink_st.h>
+#include <linux/usb/musb.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
@@ -38,12 +39,11 @@
#include <asm/mach/map.h>
#include <video/omapdss.h>
-#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
+#include "common.h"
#include "soc.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 56277a0..f5ba43f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -48,14 +48,17 @@
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
+#include "gpmc.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
#define OVERO_GPIO_PENDOWN 114
@@ -494,8 +497,8 @@
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_nand_flash_init(0, overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions));
+ board_nand_init(overo_nand_partitions,
+ ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 45997bf..1997e0e 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -22,17 +22,14 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <plat/i2c.h>
-#include <plat/mmc.h>
-#include <plat/usb.h>
-#include <plat/gpmc.h>
#include "common.h"
-#include <plat/serial.h>
-
#include "mux.h"
+#include "gpmc.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "sdram-nokia.h"
#include "common-board-devices.h"
+#include "gpmc-onenand.h"
static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 020e03c..07005fe 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -31,9 +31,7 @@
#include <asm/system_info.h>
#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/omap-pm.h>
+#include <plat-omap/dma-omap.h>
#include "gpmc-smc91x.h"
#include "board-rx51.h"
@@ -52,8 +50,11 @@
#endif
#include "mux.h"
+#include "omap-pm.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-onenand.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 7bbb05d..c388aec 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -17,18 +17,18 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include <plat-omap/dma-omap.h>
+#include "common.h"
#include "mux.h"
+#include "gpmc.h"
#include "pm.h"
#include "sdram-nokia.h"
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index c4f8833..5e672c2 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -14,13 +14,14 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
static struct omap_musb_board_data musb_board_data = {
.set_phy_power = ti81xx_musb_phy_power,
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index afb2278..42e5f23 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -17,10 +17,10 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "soc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index b940ab2..1c7c834 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -16,8 +16,9 @@
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
+#include "soc.h"
#include "common.h"
#define LCD_PANEL_RESET_GPIO_PROD 96
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c166fe1..26e07ad 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -26,9 +26,8 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "mux.h"
#include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4994438..8feb4d9 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -22,9 +22,8 @@
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
@@ -113,8 +112,9 @@
usbhs_init(&usbhs_bdata);
}
- board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
- ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+ board_nand_init(zoom_nand_partitions,
+ ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+ NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/board-zoom.h
rename to arch/arm/mach-omap2/board-zoom.h
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index c2d1521..e3f0c1e 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -21,12 +21,11 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
#include <plat/prcm.h>
#include "clock.h"
#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c
index 1502a7b..399534c 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c
@@ -14,10 +14,8 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* Private functions */
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 4ae4392..0d2f14c 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -25,15 +25,13 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "sram.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index c346092..e177737 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -23,8 +23,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
index 8693cfd..46683b3 100644
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -22,8 +22,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3524f0e7..a38ebb2 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,16 +33,14 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "sram.h"
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 7c6da2f..6cf298e 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -21,14 +21,11 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
+#include "sram.h"
#define CYCLES_PER_MHZ 1000000
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 3ff2211..53646fa 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -45,8 +45,6 @@
#include <linux/io.h>
#include <linux/bug.h>
-#include <plat/clock.h>
-
#include "clock.h"
/* Private functions */
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 8041114..8463cc3 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -21,8 +21,6 @@
#include <asm/div64.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index 3d43fba..7c8d41e 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -14,7 +14,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
#include <plat/prcm.h>
#include "clock.h"
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 961ac8f..9205ea7 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -15,6 +15,7 @@
#undef DEBUG
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
@@ -25,7 +26,6 @@
#include <asm/cpu.h>
-#include <plat/clock.h>
#include <plat/prcm.h>
#include <trace/events/power.h>
@@ -33,7 +33,8 @@
#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
@@ -47,6 +48,10 @@
*/
static bool clkdm_control = true;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
/*
* OMAP2+ specific clock functions
*/
@@ -512,12 +517,510 @@
/* Common data */
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ pr_err("Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
+ omap2_clk_disable(clk);
+
+out:
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_set_rate(clk, rate);
+ if (ret == 0)
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ ret = omap2_clk_set_parent(clk, parent);
+ if (ret == 0)
+ propagate_rate(clk);
+ } else {
+ ret = -EBUSY;
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+ get_option(&str, &mpurate);
+
+ if (!mpurate)
+ return 1;
+
+ if (mpurate < 1000)
+ mpurate *= 1000000;
+
+ return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+ return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
+ mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
+ list_add(&clk->node, &clocks);
+ if (clk->init)
+ clk->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clocks, node)
+ if (clkp->flags & ENABLE_ON_INIT)
+ clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
};
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || !ck->enable_reg)
+ continue;
+
+ omap2_clk_disable_unused(ck);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ mutex_lock(&clocks_mutex);
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate,
+ c->usecount);
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d;
+ struct clk *pa = c->parent;
+
+ d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
+
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 35ec5f3..cfba1ff 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -17,8 +17,323 @@
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
#include <linux/kernel.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+
+struct omap_clk {
+ u16 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_242X (1 << 0)
+#define CK_243X (1 << 1) /* 243x, 253x */
+#define CK_3430ES1 (1 << 2) /* 34xxES1 only */
+#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_AM35XX (1 << 4) /* Sitara AM35xx */
+#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */
+#define CK_443X (1 << 6)
+#define CK_TI816X (1 << 7)
+#define CK_446X (1 << 8)
+#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */
+
+
+#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
+
+struct module;
+struct clk;
+struct clockdomain;
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX (1 << 4)
+#define RATE_IN_4430 (1 << 5)
+#define RATE_IN_TI816X (1 << 6)
+#define RATE_IN_4460 (1 << 7)
+#define RATE_IN_AM33XX (1 << 8)
+#define RATE_IN_TI814X (1 << 9)
+
+#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ */
+struct clksel_rate {
+ u32 val;
+ u8 div;
+ u16 flags;
+};
+
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+ struct clk *parent;
+ const struct clksel_rate *rates;
+};
+
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+ void __iomem *mult_div1_reg;
+ u32 mult_mask;
+ u32 div1_mask;
+ struct clk *clk_bypass;
+ struct clk *clk_ref;
+ void __iomem *control_reg;
+ u32 enable_mask;
+ unsigned long last_rounded_rate;
+ u16 last_rounded_m;
+ u16 max_multiplier;
+ u8 last_rounded_n;
+ u8 min_divider;
+ u16 max_divider;
+ u8 modes;
+ void __iomem *autoidle_reg;
+ void __iomem *idlest_reg;
+ u32 autoidle_mask;
+ u32 freqsel_mask;
+ u32 idlest_mask;
+ u32 dco_mask;
+ u32 sddiv_mask;
+ u8 auto_recal_bit;
+ u8 recal_en_bit;
+ u8 recal_st_bit;
+ u8 flags;
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ void __iomem *clksel_reg;
+ u32 clksel_mask;
+ const struct clksel *clksel;
+ struct dpll_data *dpll_data;
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
+
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index c3cde1a..da1e388 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -18,14 +18,12 @@
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
@@ -1935,8 +1933,6 @@
cpu_mask = RATE_IN_242X;
rate_table = omap2420_rate_table;
- clk_init(&omap2_clk_functions);
-
for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
c++)
clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index a8e3261..e37df53 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,13 +21,11 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/**
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 22404fe..c97dafe 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,14 +17,12 @@
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
@@ -2034,8 +2032,6 @@
cpu_mask = RATE_IN_243X;
rate_table = omap2430_rate_table;
- clk_init(&omap2_clk_functions);
-
for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
c++)
clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index e92be1f..5feee16 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,8 +22,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 1a45d6b..17e3de5 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -17,9 +17,8 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
-#include <plat/clkdev_omap.h>
-#include "am33xx.h"
+#include "soc.h"
#include "iomap.h"
#include "control.h"
#include "clock.h"
@@ -1087,8 +1086,6 @@
cpu_clkflg = CK_AM33XX;
}
- clk_init(&omap2_clk_functions);
-
for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++)
clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 1fc96b9..e41819b 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -21,11 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock34xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/**
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
index 2e97d08..622ea05 100644
--- a/arch/arm/mach-omap2/clock3517.c
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -21,11 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/*
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index 0c5e25e..0e1e9e4 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -22,8 +22,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock36xx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 83bb014..3e8aca2 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,8 +21,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 1f42c9d..6cca199 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -21,8 +21,6 @@
#include <linux/list.h>
#include <linux/io.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
@@ -30,7 +28,7 @@
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
@@ -3573,8 +3571,6 @@
else
dpll4_dd = dpll4_dd_34xx;
- clk_init(&omap2_clk_functions);
-
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
c++)
clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 6efc30c..2a450c9 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -28,8 +28,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
@@ -3366,8 +3364,6 @@
return 0;
}
- clk_init(&omap2_clk_functions);
-
/*
* Must stay commented until all OMAP SoC drivers are
* converted to runtime PM, or drivers may start crashing
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 512e79a..64e5046 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -27,7 +27,8 @@
#include <linux/bitops.h>
-#include <plat/clock.h>
+#include "soc.h"
+#include "clock.h"
#include "clockdomain.h"
/* clkdm_list contains all registered struct clockdomains */
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 629576b..bc42446 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -18,9 +18,8 @@
#include <linux/spinlock.h>
#include "powerdomain.h"
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
+#include "clock.h"
+#include "omap_hwmod.h"
/*
* Clockdomain flags
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
deleted file mode 100644
index 70294f5..0000000
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * OMAP2 and OMAP3 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <plat/prcm.h>
-#include "prm.h"
-#include "prm2xxx_3xxx.h"
-#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-24xx.h"
-#include "clockdomain.h"
-
-static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
- return 0;
-}
-
-static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
- return 0;
-}
-
-static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
- PM_WKDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- /* PRM accesses are slow, so minimize them */
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->wkdep_usecount, 0);
- }
-
- omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
- PM_WKDEP);
- return 0;
-}
-
-static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- /* PRM accesses are slow, so minimize them */
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->sleepdep_usecount, 0);
- }
- omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap2_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_add_autodeps(clkdm);
-
- omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_del_autodeps(clkdm);
-}
-
-static void _enable_hwsup(struct clockdomain *clkdm)
-{
- if (cpu_is_omap24xx())
- omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- else if (cpu_is_omap34xx())
- omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void _disable_hwsup(struct clockdomain *clkdm)
-{
- if (cpu_is_omap24xx())
- omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- else if (cpu_is_omap34xx())
- omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
-static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_add_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap2_clkdm_wakeup(clkdm);
- }
-
- return 0;
-}
-
-static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_del_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
- omap2_clkdm_sleep(clkdm);
- }
-
- return 0;
-}
-
-static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_add_autodeps(clkdm);
-
- omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_del_autodeps(clkdm);
-}
-
-static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
- (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
- omap3_clkdm_wakeup(clkdm);
- return 0;
- }
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_add_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap3_clkdm_wakeup(clkdm);
- }
-
- return 0;
-}
-
-static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
- !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- _enable_hwsup(clkdm);
- return 0;
- }
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_del_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
- omap3_clkdm_sleep(clkdm);
- }
-
- return 0;
-}
-
-struct clkdm_ops omap2_clkdm_operations = {
- .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
- .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
- .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
- .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
- .clkdm_sleep = omap2_clkdm_sleep,
- .clkdm_wakeup = omap2_clkdm_wakeup,
- .clkdm_allow_idle = omap2_clkdm_allow_idle,
- .clkdm_deny_idle = omap2_clkdm_deny_idle,
- .clkdm_clk_enable = omap2_clkdm_clk_enable,
- .clkdm_clk_disable = omap2_clkdm_clk_disable,
-};
-
-struct clkdm_ops omap3_clkdm_operations = {
- .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
- .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
- .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
- .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
- .clkdm_add_sleepdep = omap3_clkdm_add_sleepdep,
- .clkdm_del_sleepdep = omap3_clkdm_del_sleepdep,
- .clkdm_read_sleepdep = omap3_clkdm_read_sleepdep,
- .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps,
- .clkdm_sleep = omap3_clkdm_sleep,
- .clkdm_wakeup = omap3_clkdm_wakeup,
- .clkdm_allow_idle = omap3_clkdm_allow_idle,
- .clkdm_deny_idle = omap3_clkdm_deny_idle,
- .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
- .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
-};
diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c
deleted file mode 100644
index aca6388..0000000
--- a/arch/arm/mach-omap2/clockdomain33xx.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * AM33XX clockdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-
-#include "clockdomain.h"
-#include "cm33xx.h"
-
-
-static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- return am33xx_clkdm_wakeup(clkdm);
-
- return 0;
-}
-
-static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
- if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
- am33xx_clkdm_sleep(clkdm);
-
- return 0;
-}
-
-struct clkdm_ops am33xx_clkdm_operations = {
- .clkdm_sleep = am33xx_clkdm_sleep,
- .clkdm_wakeup = am33xx_clkdm_wakeup,
- .clkdm_allow_idle = am33xx_clkdm_allow_idle,
- .clkdm_deny_idle = am33xx_clkdm_deny_idle,
- .clkdm_clk_enable = am33xx_clkdm_clk_enable,
- .clkdm_clk_disable = am33xx_clkdm_clk_disable,
-};
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
deleted file mode 100644
index 6fc6155..0000000
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * OMAP4 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include "clockdomain.h"
-#include "cminst44xx.h"
-#include "cm44xx.h"
-
-static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP,
- (1 << clkdm2->dep_bit));
-}
-
-static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- if (!clkdm->prcm_partition)
- return 0;
-
- for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->wkdep_usecount, 0);
- }
-
- omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap4_clkdm_wakeup(clkdm);
- else
- omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst,
- clkdm->clkdm_offs);
-}
-
-static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- return omap4_clkdm_wakeup(clkdm);
-
- return 0;
-}
-
-static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->prcm_partition)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
- !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- omap4_clkdm_allow_idle(clkdm);
- return 0;
- }
-
- hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
-
- if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
- omap4_clkdm_sleep(clkdm);
-
- return 0;
-}
-
-struct clkdm_ops omap4_clkdm_operations = {
- .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
- .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
- .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
- .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
- .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
- .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
- .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
- .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
- .clkdm_sleep = omap4_clkdm_sleep,
- .clkdm_wakeup = omap4_clkdm_wakeup,
- .clkdm_allow_idle = omap4_clkdm_allow_idle,
- .clkdm_deny_idle = omap4_clkdm_deny_idle,
- .clkdm_clk_enable = omap4_clkdm_clk_enable,
- .clkdm_clk_disable = omap4_clkdm_clk_disable,
-};
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
index 5c74185..7e76bec 100644
--- a/arch/arm/mach-omap2/clockdomains2420_data.c
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -35,6 +35,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
index f096175..b923007 100644
--- a/arch/arm/mach-omap2/clockdomains2430_data.c
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -35,6 +35,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 933a35c..e6b91e5 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -33,6 +33,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index f24e3f7..b3cee91 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -33,4 +33,16 @@
*/
#define MAX_MODULE_DISABLE_TIME 5000
+# ifndef __ASSEMBLER__
+
+/**
+ * struct cm_ll_data - fn ptrs to per-SoC CM function implementations
+ */
+struct cm_ll_data {};
+
+extern int cm_register(struct cm_ll_data *cld);
+extern int cm_unregister(struct cm_ll_data *cld);
+
+# endif
+
#endif
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
new file mode 100644
index 0000000..6416501
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -0,0 +1,255 @@
+/*
+ * OMAP2xxx CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "common.h"
+#include "prm2xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm-regbits-24xx.h"
+#include "clockdomain.h"
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
+#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
+#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
+
+static const u8 omap2xxx_cm_idlest_offs[] = {
+ CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+};
+
+/*
+ *
+ */
+
+static void _write_clktrctrl(u8 c, s16 module, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+ v &= ~mask;
+ v |= c << __ffs(mask);
+ omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
+}
+
+bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
+}
+
+void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+{
+ _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
+}
+
+void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+{
+ _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+}
+
+/*
+ * DPLL autoidle control
+ */
+
+static void _omap2xxx_set_dpll_autoidle(u8 m)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+ v &= ~OMAP24XX_AUTO_DPLL_MASK;
+ v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_dpll_disable_autoidle(void)
+{
+ _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
+}
+
+void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
+{
+ _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
+}
+
+/*
+ * APLL autoidle control
+ */
+
+static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+ v &= ~mask;
+ v |= m << __ffs(mask);
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_apll54_disable_autoidle(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+ OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+ OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_disable_autoidle(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+ OMAP24XX_AUTO_96M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+ OMAP24XX_AUTO_96M_MASK);
+}
+
+/*
+ *
+ */
+
+/**
+ * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
+ */
+int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+ int ena = 0, i = 0;
+ u8 cm_idlest_reg;
+ u32 mask;
+
+ if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
+ return -EINVAL;
+
+ cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
+
+ mask = 1 << idlest_shift;
+ ena = mask;
+
+ omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+ mask) == ena), MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/* Clockdomain low-level functions */
+
+static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
+
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+}
+
+static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+}
+
+static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_add_autodeps(clkdm);
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap2xxx_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_del_autodeps(clkdm);
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap2xxx_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
+struct clkdm_ops omap2_clkdm_operations = {
+ .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
+ .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
+ .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
+ .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
+ .clkdm_sleep = omap2xxx_clkdm_sleep,
+ .clkdm_wakeup = omap2xxx_clkdm_wakeup,
+ .clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
+ .clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
+ .clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
+};
+
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
new file mode 100644
index 0000000..bce3c4b
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -0,0 +1,66 @@
+/*
+ * OMAP2xxx Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP2420_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP2-specific register offsets */
+
+#define OMAP24XX_CM_FCLKEN2 0x0004
+#define OMAP24XX_CM_ICLKEN4 0x001c
+#define OMAP24XX_CM_AUTOIDLE4 0x003c
+#define OMAP24XX_CM_IDLEST4 0x002c
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP24XX_CM_IDLEST_VAL 0
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+
+extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+
+extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
+extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+
+extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
+extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+
+extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index 57b2f3c..0e26bb1 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -18,27 +18,6 @@
#include "prcm-common.h"
-#define OMAP2420_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-#define OMAP34XX_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-
-
-/*
- * OMAP3-specific global CM registers
- * Use cm_{read,write}_reg() with these registers.
- * These registers appear once per CM module.
- */
-
-#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
-
-#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
/*
* Module specific CM register offsets from CM_BASE + domain offset
* Use cm_{read,write}_mod_reg() with these registers.
@@ -57,6 +36,7 @@
#define CM_IDLEST 0x0020
#define CM_IDLEST1 CM_IDLEST
#define CM_IDLEST2 0x0024
+#define OMAP2430_CM_IDLEST3 0x0028
#define CM_AUTOIDLE 0x0030
#define CM_AUTOIDLE1 CM_AUTOIDLE
#define CM_AUTOIDLE2 0x0034
@@ -66,70 +46,55 @@
#define CM_CLKSEL2 0x0044
#define OMAP2_CM_CLKSTCTRL 0x0048
-/* OMAP2-specific register offsets */
-
-#define OMAP24XX_CM_FCLKEN2 0x0004
-#define OMAP24XX_CM_ICLKEN4 0x001c
-#define OMAP24XX_CM_AUTOIDLE4 0x003c
-#define OMAP24XX_CM_IDLEST4 0x002c
-
-#define OMAP2430_CM_IDLEST3 0x0028
-
-/* OMAP3-specific register offsets */
-
-#define OMAP3430_CM_CLKEN_PLL 0x0004
-#define OMAP3430ES2_CM_CLKEN2 0x0004
-#define OMAP3430ES2_CM_FCLKEN3 0x0008
-#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
-#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
-#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
-#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
-#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
-#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
-#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
-#define OMAP3430_CM_CLKSTST 0x004c
-#define OMAP3430ES2_CM_CLKSEL4 0x004c
-#define OMAP3430ES2_CM_CLKSEL5 0x0050
-#define OMAP3430_CM_CLKSEL2_EMU 0x0050
-#define OMAP3430_CM_CLKSEL3_EMU 0x0054
-
-
-/* CM_IDLEST bit field values to indicate deasserted IdleReq */
-
-#define OMAP24XX_CM_IDLEST_VAL 0
-#define OMAP34XX_CM_IDLEST_VAL 1
-
-
-/* Clock management domain register get/set */
-
#ifndef __ASSEMBLER__
-extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+#include <linux/io.h>
-extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
- u8 idlest_shift);
-extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(cm_base + module + idx);
+}
-extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, cm_base + module + idx);
+}
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+/* Read-modify-write a register in a CM module. Caller must lock */
+static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+ s16 idx)
+{
+ u32 v;
-extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
-extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+ v = omap2_cm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ omap2_cm_write_mod_reg(v, module, idx);
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+ return v;
+}
+
+/* Read a CM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
#endif
@@ -147,10 +112,4 @@
#define OMAP_ST_GFX_MASK (1 << 0)
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-extern void omap3_cm_save_context(void);
-extern void omap3_cm_restore_context(void);
-# endif
-
#endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 13f56ea..058ce3c 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -22,8 +22,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
-
+#include "clockdomain.h"
#include "cm.h"
#include "cm33xx.h"
#include "cm-regbits-34xx.h"
@@ -311,3 +310,58 @@
v &= ~AM33XX_MODULEMODE_MASK;
am33xx_cm_write_reg(v, inst, clkctrl_offs);
}
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return am33xx_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ am33xx_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+ .clkdm_sleep = am33xx_clkdm_sleep,
+ .clkdm_wakeup = am33xx_clkdm_wakeup,
+ .clkdm_allow_idle = am33xx_clkdm_allow_idle,
+ .clkdm_deny_idle = am33xx_clkdm_deny_idle,
+ .clkdm_clk_enable = am33xx_clkdm_clk_enable,
+ .clkdm_clk_disable = am33xx_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
similarity index 72%
rename from arch/arm/mach-omap2/cm2xxx_3xxx.c
rename to arch/arm/mach-omap2/cm3xxx.c
index 7f07ab0..8b03ec2 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -1,8 +1,10 @@
/*
- * OMAP2/3 CM module functions
+ * OMAP3xxx CM module functions
*
* Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,8 +14,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -21,56 +21,16 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
+#include "prm2xxx_3xxx.h"
#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "clockdomain.h"
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
-#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-static const u8 cm_idlest_offs[] = {
- CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+static const u8 omap3xxx_cm_idlest_offs[] = {
+ CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
-u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
-{
- return __raw_readl(cm_base + module + idx);
-}
-
-void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __raw_writel(val, cm_base + module + idx);
-}
-
-/* Read-modify-write a register in a CM module. Caller must lock */
-u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- omap2_cm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
/*
*
*/
@@ -85,33 +45,15 @@
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
-bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
- bool ret = 0;
-
- BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx());
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
- if (cpu_is_omap24xx())
- ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
- else
- ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-
- return ret;
-}
-
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
-}
-
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+ return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
@@ -135,109 +77,209 @@
}
/*
- * DPLL autoidle control
- */
-
-static void _omap2xxx_set_dpll_autoidle(u8 m)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
- v &= ~OMAP24XX_AUTO_DPLL_MASK;
- v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
- omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_dpll_disable_autoidle(void)
-{
- _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
-}
-
-void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
-{
- _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
-}
-
-/*
- * APLL autoidle control
- */
-
-static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
- v &= ~mask;
- v |= m << __ffs(mask);
- omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_apll54_disable_autoidle(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
- OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
- OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_disable_autoidle(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
- OMAP24XX_AUTO_96M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
- OMAP24XX_AUTO_96M_MASK);
-}
-
-/*
*
*/
/**
- * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
- * XXX document
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
*/
-int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
- if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+ if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs)))
return -EINVAL;
- cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+ cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1];
mask = 1 << idlest_shift;
+ ena = 0;
- if (cpu_is_omap24xx())
- ena = mask;
- else if (cpu_is_omap34xx())
- ena = 0;
- else
- BUG();
-
- omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
- MAX_MODULE_READY_TIME, i);
+ omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+ mask) == ena), MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
+/* Clockdomain low-level operations */
+
+static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
+}
+
+static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
+}
+
+static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP,
+ (1 << clkdm2->dep_bit));
+}
+
+static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->sleepdep_usecount, 0);
+ }
+ omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
+}
+
+static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+}
+
+static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+}
+
+static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
+
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+}
+
+static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+}
+
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+ (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+ omap3xxx_clkdm_wakeup(clkdm);
+ return 0;
+ }
+
+ hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_add_autodeps(clkdm);
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap3xxx_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+ }
+
+ hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_del_autodeps(clkdm);
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap3xxx_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
+struct clkdm_ops omap3_clkdm_operations = {
+ .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
+ .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
+ .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
+ .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
+ .clkdm_add_sleepdep = omap3xxx_clkdm_add_sleepdep,
+ .clkdm_del_sleepdep = omap3xxx_clkdm_del_sleepdep,
+ .clkdm_read_sleepdep = omap3xxx_clkdm_read_sleepdep,
+ .clkdm_clear_all_sleepdeps = omap3xxx_clkdm_clear_all_sleepdeps,
+ .clkdm_sleep = omap3xxx_clkdm_sleep,
+ .clkdm_wakeup = omap3xxx_clkdm_wakeup,
+ .clkdm_allow_idle = omap3xxx_clkdm_allow_idle,
+ .clkdm_deny_idle = omap3xxx_clkdm_deny_idle,
+ .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
+};
+
/*
* Context save/restore code - OMAP3 only
*/
-#ifdef CONFIG_ARCH_OMAP3
struct omap3_cm_regs {
u32 iva2_cm_clksel1;
u32 iva2_cm_clksel2;
@@ -555,4 +597,3 @@
omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
OMAP3_CM_CLKOUT_CTRL_OFFSET);
}
-#endif
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
new file mode 100644
index 0000000..4a6ac81
--- /dev/null
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -0,0 +1,86 @@
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP34XX_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP3-specific register offsets */
+
+#define OMAP3430_CM_CLKEN_PLL 0x0004
+#define OMAP3430ES2_CM_CLKEN2 0x0004
+#define OMAP3430ES2_CM_FCLKEN3 0x0008
+#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST 0x004c
+#define OMAP3430ES2_CM_CLKSEL4 0x004c
+#define OMAP3430ES2_CM_CLKSEL5 0x0050
+#define OMAP3430_CM_CLKSEL2_EMU 0x0050
+#define OMAP3430_CM_CLKSEL3_EMU 0x0054
+
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+
+#ifndef __ASSEMBLER__
+
+extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+
+extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+
+extern void omap3_cm_save_context(void);
+extern void omap3_cm_restore_context(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
new file mode 100644
index 0000000..3246cef
--- /dev/null
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -0,0 +1,71 @@
+/*
+ * OMAP2+ common Clock Management (CM) IP block functions
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley <paul@pwsan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This code should eventually be moved to a CM driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "cm2xxx.h"
+#include "cm3xxx.h"
+#include "cm44xx.h"
+
+/*
+ * cm_ll_data: function pointers to SoC-specific implementations of
+ * common CM functions
+ */
+static struct cm_ll_data null_cm_ll_data;
+static struct cm_ll_data *cm_ll_data = &null_cm_ll_data;
+
+/**
+ * cm_register - register per-SoC low-level data with the CM
+ * @cld: low-level per-SoC OMAP CM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP CM data and function pointers with
+ * the OMAP CM common interface. The caller must keep the data
+ * pointed to by @cld valid until it calls cm_unregister() and
+ * it returns successfully. Returns 0 upon success, -EINVAL if @cld
+ * is NULL, or -EEXIST if cm_register() has already been called
+ * without an intervening cm_unregister().
+ */
+int cm_register(struct cm_ll_data *cld)
+{
+ if (!cld)
+ return -EINVAL;
+
+ if (cm_ll_data != &null_cm_ll_data)
+ return -EEXIST;
+
+ cm_ll_data = cld;
+
+ return 0;
+}
+
+/**
+ * cm_unregister - unregister per-SoC low-level data & function pointers
+ * @cld: low-level per-SoC OMAP CM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP CM data and function pointers
+ * that were previously registered with cm_register(). The
+ * caller may not destroy any of the data pointed to by @cld until
+ * this function returns successfully. Returns 0 upon success, or
+ * -EINVAL if @cld is NULL or if @cld does not match the struct
+ * cm_ll_data * previously registered by cm_register().
+ */
+int cm_unregister(struct cm_ll_data *cld)
+{
+ if (!cld || cm_ll_data != cld)
+ return -EINVAL;
+
+ cm_ll_data = &null_cm_ll_data;
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 1894015..7f9a464 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -2,8 +2,9 @@
* OMAP4 CM instance functions
*
* Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,6 +23,7 @@
#include "iomap.h"
#include "common.h"
+#include "clockdomain.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
@@ -343,3 +345,141 @@
v &= ~OMAP4430_MODULEMODE_MASK;
omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
}
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->prcm_partition,
+ clkdm1->cm_inst, clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->prcm_partition,
+ clkdm1->cm_inst, clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
+ clkdm1->cm_inst,
+ clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP,
+ (1 << clkdm2->dep_bit));
+}
+
+static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ if (!clkdm->prcm_partition)
+ return 0;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->wkdep_usecount, 0);
+ }
+
+ omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap4_clkdm_wakeup(clkdm);
+ else
+ omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst,
+ clkdm->clkdm_offs);
+}
+
+static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return omap4_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->prcm_partition)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ omap4_clkdm_allow_idle(clkdm);
+ return 0;
+ }
+
+ hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ omap4_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops omap4_clkdm_operations = {
+ .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
+ .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
+ .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
+ .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
+ .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
+ .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
+ .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
+ .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
+ .clkdm_sleep = omap4_clkdm_sleep,
+ .clkdm_wakeup = omap4_clkdm_wakeup,
+ .clkdm_allow_idle = omap4_clkdm_allow_idle,
+ .clkdm_deny_idle = omap4_clkdm_deny_idle,
+ .clkdm_clk_enable = omap4_clkdm_clk_enable,
+ .clkdm_clk_disable = omap4_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 84551f2..d246efd 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -25,7 +25,6 @@
#include <linux/spi/ads7846.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include "common-board-devices.h"
@@ -102,48 +101,3 @@
{
}
#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- pr_info("NAND: Unable to find configuration in GPMC\n");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- nand_data.cs = nandcs;
- nand_data.parts = parts;
- nand_data.nr_parts = nr_parts;
- nand_data.devsize = options;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a428..72bb41b 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -10,6 +10,5 @@
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 17950c6..34fb5b9 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -16,14 +16,17 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/platform_data/dsp-omap.h>
-#include <plat/clock.h>
+#include <plat/vram.h>
#include "soc.h"
#include "iomap.h"
#include "common.h"
+#include "clock.h"
#include "sdrc.h"
#include "control.h"
+#include "omap-secure.h"
/* Global address base setup code */
@@ -200,3 +203,20 @@
omap5_map_common_io();
}
#endif
+
+/*
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
+ */
+int __weak omap_secure_ram_reserve_memblock(void)
+{
+ return 0;
+}
+
+void __init omap_reserve(void)
+{
+ omap_vram_reserve_sdram_memblock();
+ omap_dsp_reserve_sdram_memblock();
+ omap_secure_ram_reserve_memblock();
+ omap_barrier_reserve_memblock();
+}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index d29dbaa..fd97f31 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -28,13 +28,16 @@
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/i2c.h>
#include <linux/i2c/twl.h>
+#include <linux/i2c-omap.h>
#include <asm/proc-fns.h>
-#include <plat/cpu.h>
-#include <plat/serial.h>
-#include <plat/common.h>
+#include "i2c.h"
+#include "serial.h"
+
+#include "usb.h"
#define OMAP_INTC_START NR_IRQS
@@ -342,6 +345,10 @@
struct omap_sdrc_params *sdrc_cs1);
struct omap2_hsmmc_info;
extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
+extern void omap_reserve(void);
+
+struct omap_hwmod;
+extern int omap_dss_reset(struct omap_hwmod *);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index d1ff839..06375ad 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 System Control Module register access
*
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007, 2012 Texas Instruments, Inc.
* Copyright (C) 2007 Nokia Corporation
*
* Written by Paul Walmsley
@@ -15,15 +15,13 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm3xxx.h"
+#include "cm3xxx.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h
deleted file mode 100644
index a4edbd2..0000000
--- a/arch/arm/mach-omap2/debug-devices.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _OMAP_DEBUG_DEVICES_H
-#define _OMAP_DEBUG_DEVICES_H
-
-#include <linux/types.h>
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index c72b5a7..738ae0d 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -24,10 +24,11 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
+#include <plat-omap/dma-omap.h>
+
#include "iomap.h"
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "omap4-keypad.h"
#include "soc.h"
@@ -35,6 +36,7 @@
#include "mux.h"
#include "control.h"
#include "devices.h"
+#include "dma.h"
#define L3_MODULES_MAX_LEN 12
#define L3_MODULES 3
@@ -127,7 +129,7 @@
#if defined(CONFIG_IOMMU_API)
-#include <plat/iommu.h>
+#include <linux/platform_data/iommu-omap.h>
static struct resource omap3isp_resources[] = {
{
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 1011995..89c5712 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,11 +25,12 @@
#include <linux/delay.h>
#include <video/omapdss.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "common.h"
+#include "soc.h"
#include "iomap.h"
#include "mux.h"
#include "control.h"
@@ -284,6 +285,35 @@
return ERR_PTR(r);
}
+static enum omapdss_version __init omap_display_get_version(void)
+{
+ if (cpu_is_omap24xx())
+ return OMAPDSS_VER_OMAP24xx;
+ else if (cpu_is_omap3630())
+ return OMAPDSS_VER_OMAP3630;
+ else if (cpu_is_omap34xx()) {
+ if (soc_is_am35xx()) {
+ return OMAPDSS_VER_AM35xx;
+ } else {
+ if (omap_rev() < OMAP3430_REV_ES3_0)
+ return OMAPDSS_VER_OMAP34xx_ES1;
+ else
+ return OMAPDSS_VER_OMAP34xx_ES3;
+ }
+ } else if (omap_rev() == OMAP4430_REV_ES1_0)
+ return OMAPDSS_VER_OMAP4430_ES1;
+ else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+ omap_rev() == OMAP4430_REV_ES2_1 ||
+ omap_rev() == OMAP4430_REV_ES2_2)
+ return OMAPDSS_VER_OMAP4430_ES2;
+ else if (cpu_is_omap44xx())
+ return OMAPDSS_VER_OMAP4;
+ else if (soc_is_omap54xx())
+ return OMAPDSS_VER_OMAP5;
+ else
+ return OMAPDSS_VER_UNKNOWN;
+}
+
int __init omap_display_init(struct omap_dss_board_info *board_data)
{
int r = 0;
@@ -291,9 +321,18 @@
int i, oh_count;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
struct platform_device *dss_pdev;
+ enum omapdss_version ver;
/* create omapdss device */
+ ver = omap_display_get_version();
+
+ if (ver == OMAPDSS_VER_UNKNOWN) {
+ pr_err("DSS not supported on this SoC\n");
+ return -ENODEV;
+ }
+
+ board_data->version = ver;
board_data->dsi_enable_pads = omap_dsi_enable_pads;
board_data->dsi_disable_pads = omap_dsi_disable_pads;
board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index ff75abe..e5aba58 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -28,9 +28,11 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
#define OMAP2_DMA_STRIDE 0x60
@@ -274,6 +276,9 @@
return -ENOMEM;
}
+ if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+ d->dev_caps |= HS_CHANNELS_RESERVED;
+
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;
diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h
new file mode 100644
index 0000000..eba80db
--- /dev/null
+++ b/arch/arm/mach-omap2/dma.h
@@ -0,0 +1,131 @@
+/*
+ * OMAP2PLUS DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP2PLUS_DMA_CHANNEL_H
+#define __OMAP2PLUS_DMA_CHANNEL_H
+
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE 0
+#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
+
+#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
+
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX 54
+#define AM35XX_DMA_UART4_RX 55
+
+#endif /* __OMAP2PLUS_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 814e180..eacf51f 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,8 +28,6 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 09d0ccc..5854da1 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,8 +15,6 @@
#include <linux/io.h>
#include <linux/bitops.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock44xx.h"
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 49a7ffb..fce5aa3 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,8 +25,8 @@
#include <linux/dma-mapping.h>
#include <linux/platform_data/omap_drm.h>
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_device.h"
+#include "omap_hwmod.h"
#include <plat/cpu.h>
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 9838810..b155500 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -27,7 +27,7 @@
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
#endif
#include <linux/platform_data/dsp-omap.h>
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index d1058f1..399acab 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,9 +23,9 @@
#include <linux/of.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 4acf497..8607735 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -17,9 +17,12 @@
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
#include "soc.h"
+#include "gpmc-nand.h"
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE 4
static struct resource gpmc_nand_resource[] = {
{
@@ -40,41 +43,36 @@
.resource = gpmc_nand_resource,
};
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
+static int omap2_nand_gpmc_retime(
+ struct omap_nand_platform_data *gpmc_nand_data,
+ struct gpmc_timings *gpmc_t)
{
struct gpmc_timings t;
int err;
- if (!gpmc_nand_data->gpmc_t)
- return 0;
-
memset(&t, 0, sizeof(t));
- t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
- t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
- t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+ t.sync_clk = gpmc_t->sync_clk;
+ t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on);
+ t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on);
/* Read */
- t.adv_rd_off = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->adv_rd_off);
+ t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off);
t.oe_on = t.adv_on;
- t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
- t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
- t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
- t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+ t.access = gpmc_round_ns_to_ticks(gpmc_t->access);
+ t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off);
+ t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off);
+ t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle);
/* Write */
- t.adv_wr_off = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->adv_wr_off);
+ t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off);
t.we_on = t.oe_on;
if (cpu_is_omap34xx()) {
- t.wr_data_mux_bus = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->wr_data_mux_bus);
- t.wr_access = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->wr_access);
+ t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus);
+ t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access);
}
- t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
- t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
- t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+ t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off);
+ t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off);
+ t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle);
/* Configure GPMC */
if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
@@ -91,7 +89,29 @@
return 0;
}
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
+static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+{
+ /* support only OMAP3 class */
+ if (!cpu_is_omap34xx()) {
+ pr_err("BCH ecc is not supported on this CPU\n");
+ return 0;
+ }
+
+ /*
+ * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+ * Other chips may be added if confirmed to work.
+ */
+ if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
+ (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+ pr_err("BCH 4-bit mode is not supported on this CPU\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+ struct gpmc_timings *gpmc_t)
{
int err = 0;
struct device *dev = &gpmc_nand_device.dev;
@@ -112,11 +132,13 @@
gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
gpmc_nand_resource[2].start =
gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
- /* Set timings in GPMC */
- err = omap2_nand_gpmc_retime(gpmc_nand_data);
- if (err < 0) {
- dev_err(dev, "Unable to set gpmc timings: %d\n", err);
- return err;
+
+ if (gpmc_t) {
+ err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
+ if (err < 0) {
+ dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+ return err;
+ }
}
/* Enable RD PIN Monitoring Reg */
@@ -126,6 +148,9 @@
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+ if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+ return -EINVAL;
+
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
dev_err(dev, "Unable to register NAND device\n");
diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h
new file mode 100644
index 0000000..d59e128
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-nand.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-omap2/gpmc-nand.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __OMAP2_GPMC_NAND_H
+#define __OMAP2_GPMC_NAND_H
+
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 916716e..d102183 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -16,15 +16,25 @@
#include <linux/mtd/onenand_regs.h>
#include <linux/io.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/err.h>
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
#include "soc.h"
+#include "gpmc-onenand.h"
#define ONENAND_IO_SIZE SZ_128K
+#define ONENAND_FLAG_SYNCREAD (1 << 0)
+#define ONENAND_FLAG_SYNCWRITE (1 << 1)
+#define ONENAND_FLAG_HF (1 << 2)
+#define ONENAND_FLAG_VHF (1 << 3)
+
+static unsigned onenand_flags;
+static unsigned latency;
+static int fclk_offset;
+
static struct omap_onenand_platform_data *gpmc_onenand_data;
static struct resource gpmc_onenand_resource = {
@@ -38,11 +48,9 @@
.resource = &gpmc_onenand_resource,
};
-static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+static struct gpmc_timings omap2_onenand_calc_async_timings(void)
{
struct gpmc_timings t;
- u32 reg;
- int err;
const int t_cer = 15;
const int t_avdp = 12;
@@ -55,11 +63,6 @@
const int t_wpl = 40;
const int t_wph = 30;
- /* Ensure sync read and sync write are disabled */
- reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
- reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
- writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
@@ -86,25 +89,30 @@
t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+ return t;
+}
+
+static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
+{
/* Configure GPMC for asynchronous read */
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
- err = gpmc_cs_set_timings(cs, &t);
- if (err)
- return err;
+ return gpmc_cs_set_timings(cs, t);
+}
+
+static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
+{
+ u32 reg;
/* Ensure sync read and sync write are disabled */
reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
- return 0;
}
-static void set_onenand_cfg(void __iomem *onenand_base, int latency,
- int sync_read, int sync_write, int hf, int vhf)
+static void set_onenand_cfg(void __iomem *onenand_base)
{
u32 reg;
@@ -112,19 +120,19 @@
reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
ONENAND_SYS_CFG1_BL_16;
- if (sync_read)
+ if (onenand_flags & ONENAND_FLAG_SYNCREAD)
reg |= ONENAND_SYS_CFG1_SYNC_READ;
else
reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
- if (sync_write)
+ if (onenand_flags & ONENAND_FLAG_SYNCWRITE)
reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
else
reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
- if (hf)
+ if (onenand_flags & ONENAND_FLAG_HF)
reg |= ONENAND_SYS_CFG1_HF;
else
reg &= ~ONENAND_SYS_CFG1_HF;
- if (vhf)
+ if (onenand_flags & ONENAND_FLAG_VHF)
reg |= ONENAND_SYS_CFG1_VHF;
else
reg &= ~ONENAND_SYS_CFG1_VHF;
@@ -132,21 +140,10 @@
}
static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
- void __iomem *onenand_base, bool *clk_dep)
+ void __iomem *onenand_base)
{
u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
- int freq = 0;
-
- if (cfg->get_freq) {
- struct onenand_freq_info fi;
-
- fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
- fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
- fi.ver_id = ver;
- freq = cfg->get_freq(&fi, clk_dep);
- if (freq)
- return freq;
- }
+ int freq;
switch ((ver >> 4) & 0xf) {
case 0:
@@ -172,9 +169,9 @@
return freq;
}
-static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
- void __iomem *onenand_base,
- int *freq_ptr)
+static struct gpmc_timings
+omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
+ int freq)
{
struct gpmc_timings t;
const int t_cer = 15;
@@ -184,29 +181,15 @@
const int t_wpl = 40;
const int t_wph = 30;
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
- int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
- int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
- int err, ticks_cez;
- int cs = cfg->cs, freq = *freq_ptr;
u32 reg;
- bool clk_dep = false;
+ int div, fclk_offset_ns, gpmc_clk_ns;
+ int ticks_cez;
+ int cs = cfg->cs;
- if (cfg->flags & ONENAND_SYNC_READ) {
- sync_read = 1;
- } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
- sync_read = 1;
- sync_write = 1;
- } else
- return omap2_onenand_set_async_mode(cs, onenand_base);
-
- if (!freq) {
- /* Very first call freq is not known */
- err = omap2_onenand_set_async_mode(cs, onenand_base);
- if (err)
- return err;
- freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
- first_time = 1;
- }
+ if (cfg->flags & ONENAND_SYNC_READ)
+ onenand_flags = ONENAND_FLAG_SYNCREAD;
+ else if (cfg->flags & ONENAND_SYNC_READWRITE)
+ onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
switch (freq) {
case 104:
@@ -244,44 +227,31 @@
t_ach = 9;
t_aavdh = 7;
t_rdyo = 15;
- sync_write = 0;
+ onenand_flags &= ~ONENAND_FLAG_SYNCWRITE;
break;
}
- div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+ div = gpmc_calc_divider(min_gpmc_clk_period);
gpmc_clk_ns = gpmc_ticks_to_ns(div);
if (gpmc_clk_ns < 15) /* >66Mhz */
- hf = 1;
+ onenand_flags |= ONENAND_FLAG_HF;
+ else
+ onenand_flags &= ~ONENAND_FLAG_HF;
if (gpmc_clk_ns < 12) /* >83Mhz */
- vhf = 1;
- if (vhf)
+ onenand_flags |= ONENAND_FLAG_VHF;
+ else
+ onenand_flags &= ~ONENAND_FLAG_VHF;
+ if (onenand_flags & ONENAND_FLAG_VHF)
latency = 8;
- else if (hf)
+ else if (onenand_flags & ONENAND_FLAG_HF)
latency = 6;
else if (gpmc_clk_ns >= 25) /* 40 MHz*/
latency = 3;
else
latency = 4;
- if (clk_dep) {
- if (gpmc_clk_ns < 12) { /* >83Mhz */
- t_ces = 3;
- t_avds = 4;
- } else if (gpmc_clk_ns < 15) { /* >66Mhz */
- t_ces = 5;
- t_avds = 4;
- } else if (gpmc_clk_ns < 25) { /* >40Mhz */
- t_ces = 6;
- t_avds = 5;
- } else {
- t_ces = 7;
- t_avds = 7;
- }
- }
-
- if (first_time)
- set_onenand_cfg(onenand_base, latency,
- sync_read, sync_write, hf, vhf);
+ /* Set synchronous read timings */
+ memset(&t, 0, sizeof(t));
if (div == 1) {
reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -307,8 +277,6 @@
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
}
- /* Set synchronous read timings */
- memset(&t, 0, sizeof(t));
t.sync_clk = min_gpmc_clk_period;
t.cs_on = 0;
t.adv_on = 0;
@@ -330,7 +298,7 @@
ticks_cez);
/* Write */
- if (sync_write) {
+ if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
t.adv_wr_off = t.adv_rd_off;
t.we_on = 0;
t.we_off = t.cs_rd_off;
@@ -355,6 +323,14 @@
}
}
+ return t;
+}
+
+static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
+{
+ unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
+ unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
+
/* Configure GPMC for synchronous read */
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_WRAPBURST_SUPP |
@@ -371,11 +347,45 @@
GPMC_CONFIG1_DEVICETYPE_NOR |
GPMC_CONFIG1_MUXADDDATA);
- err = gpmc_cs_set_timings(cs, &t);
- if (err)
- return err;
+ return gpmc_cs_set_timings(cs, t);
+}
- set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
+static int omap2_onenand_setup_async(void __iomem *onenand_base)
+{
+ struct gpmc_timings t;
+ int ret;
+
+ omap2_onenand_set_async_mode(onenand_base);
+
+ t = omap2_onenand_calc_async_timings();
+
+ ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ omap2_onenand_set_async_mode(onenand_base);
+
+ return 0;
+}
+
+static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
+{
+ int ret, freq = *freq_ptr;
+ struct gpmc_timings t;
+
+ if (!freq) {
+ /* Very first call freq is not known */
+ freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+ set_onenand_cfg(onenand_base);
+ }
+
+ t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+
+ ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ set_onenand_cfg(onenand_base);
*freq_ptr = freq;
@@ -385,15 +395,22 @@
static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
{
struct device *dev = &gpmc_onenand_device.dev;
+ unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE;
+ int ret;
- /* Set sync timings in GPMC */
- if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
- freq_ptr) < 0) {
- dev_err(dev, "Unable to set synchronous mode\n");
- return -EINVAL;
+ ret = omap2_onenand_setup_async(onenand_base);
+ if (ret) {
+ dev_err(dev, "unable to set to async mode\n");
+ return ret;
}
- return 0;
+ if (!(gpmc_onenand_data->flags & l))
+ return 0;
+
+ ret = omap2_onenand_setup_sync(onenand_base, freq_ptr);
+ if (ret)
+ dev_err(dev, "unable to set to sync mode\n");
+ return ret;
}
void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
@@ -411,6 +428,11 @@
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
+ if (cpu_is_omap34xx())
+ gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX;
+ else
+ gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX;
+
err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
(unsigned long *)&gpmc_onenand_resource.start);
if (err < 0) {
diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h
new file mode 100644
index 0000000..216f23a
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-omap2/gpmc-onenand.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __OMAP2_GPMC_ONENAND_H
+#define __OMAP2_GPMC_ONENAND_H
+
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 5654753..6eed907 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
#include "soc.h"
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 249a0b4..ef99011 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <linux/smsc911x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
static struct resource gpmc_smsc911x_resources[] = {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 92b5718..bf6117c 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,16 +26,14 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/mach-types.h>
-#include <plat/gpmc.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/omap_device.h>
+#include <asm/mach-types.h>
#include "soc.h"
#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
#define DEVICE_NAME "omap-gpmc"
@@ -59,6 +57,9 @@
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
/* GPMC ECC control settings */
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
@@ -75,6 +76,7 @@
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
+#define GPMC_BCH_SIZE 0x10
#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
@@ -137,7 +139,6 @@
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
@@ -158,22 +159,6 @@
return __raw_readl(gpmc_base + idx);
}
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- __raw_writeb(val, reg_addr);
-}
-
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- return __raw_readb(reg_addr);
-}
-
void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
@@ -288,7 +273,7 @@
return -1
#endif
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
{
int div;
u32 l;
@@ -308,7 +293,7 @@
int div;
u32 l;
- div = gpmc_cs_calc_divider(cs, t->sync_clk);
+ div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
@@ -509,44 +494,6 @@
EXPORT_SYMBOL(gpmc_cs_free);
/**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
- int status = -EINVAL;
- u32 regval = 0;
-
- switch (cmd) {
- case GPMC_GET_IRQ_STATUS:
- status = gpmc_read_reg(GPMC_IRQSTATUS);
- break;
-
- case GPMC_PREFETCH_FIFO_CNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
- break;
-
- case GPMC_PREFETCH_COUNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_COUNT(regval);
- break;
-
- case GPMC_STATUS_BUFFER:
- regval = gpmc_read_reg(GPMC_STATUS);
- /* 1 : buffer is available to write */
- status = regval & GPMC_STATUS_BUFF_EMPTY;
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_status: Not supported\n");
- }
- return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-
-/**
* gpmc_cs_configure - write request to configure gpmc
* @cs: chip select number
* @cmd: command type
@@ -614,121 +561,10 @@
}
EXPORT_SYMBOL(gpmc_cs_configure);
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
- int rval = -EINVAL;
-
- switch (cmd) {
- case GPMC_NAND_DATA:
- rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
- }
- return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
- int err = 0;
-
- switch (cmd) {
- case GPMC_NAND_COMMAND:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
- break;
-
- case GPMC_NAND_ADDRESS:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
- break;
-
- case GPMC_NAND_DATA:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-
- default:
- printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
- err = -EINVAL;
- }
- return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-
-
-
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
- unsigned int u32_count, int is_write)
-{
-
- if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
- pr_err("gpmc: fifo threshold is not supported\n");
- return -1;
- } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
- /* Set the amount of bytes to be prefetched */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-
- /* Set dma/mpu mode, the prefetch read / post write and
- * enable the engine. Set which cs is has requested for.
- */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
- PREFETCH_FIFOTHRESHOLD(fifo_th) |
- ENABLE_PREFETCH |
- (dma_mode << DMA_MPU_MODE) |
- (0x1 & is_write)));
-
- /* Start the prefetch engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
- } else {
- return -EBUSY;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
- u32 config1;
-
- /* check if the same module/cs is trying to reset */
- config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
- if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
- return -EINVAL;
-
- /* Stop the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-
- /* Reset/disable the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
-
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
+ int i;
+
reg->gpmc_status = gpmc_base + GPMC_STATUS;
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
@@ -744,7 +580,17 @@
reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
- reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+
+ for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+ reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+ GPMC_BCH_SIZE * i;
+ }
}
int gpmc_get_client_irq(unsigned irq_config)
@@ -1093,267 +939,3 @@
}
}
#endif /* CONFIG_ARCH_OMAP3 */
-
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
- unsigned int val;
-
- /* check if ecc module is in used */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
-
- /* program ecc and result sizes */
- val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-
- switch (mode) {
- case GPMC_ECC_READ:
- case GPMC_ECC_WRITE:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
- break;
- case GPMC_ECC_READSYN:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCDISABLE);
- break;
- default:
- printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
- break;
- }
-
- /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
- val = (dev_width << 7) | (cs << 1) | (0x1);
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
- unsigned int val = 0x0;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- /* read ecc result */
- val = gpmc_read_reg(GPMC_ECC1_RESULT);
- *ecc_code++ = val; /* P128e, ..., P1e */
- *ecc_code++ = val >> 16; /* P128o, ..., P1o */
- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- /* support only OMAP3 class */
- if (!cpu_is_omap34xx()) {
- printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /*
- * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
- * Other chips may be added if confirmed to work.
- */
- if ((nerrors == 4) &&
- (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
- printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /* sanity check */
- if (nsectors > 8) {
- printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
- nsectors);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
- int nerrors)
-{
- unsigned int val;
-
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-
- /*
- * When using BCH, sector size is hardcoded to 512 bytes.
- * Here we are using wrapping mode 6 both for reading and writing, with:
- * size0 = 0 (no additional protected byte in spare area)
- * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
- */
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-
- /* BCH configuration */
- val = ((1 << 16) | /* enable BCH */
- (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
- (0x06 << 8) | /* wrap mode = 6 */
- (dev_width << 7) | /* bus width */
- (((nsectors-1) & 0x7) << 4) | /* number of sectors */
- (cs << 1) | /* ECC CS */
- (0x1)); /* enable ECC */
-
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs; and
- * left-justify the resulting polynomial.
- */
- *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
- *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF);
- *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
- *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
- *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
- *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
- *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2, val3, val4;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
- val3 = gpmc_read_reg(reg + 8);
- val4 = gpmc_read_reg(reg + 12);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs.
- */
- *ecc++ = 0xef ^ (val4 & 0xFF);
- *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
- *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
- *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
- *ecc++ = 0xed ^ (val3 & 0xFF);
- *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
- *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
- *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
- *ecc++ = 0x97 ^ (val2 & 0xFF);
- *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
- *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
- *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
- *ecc++ = 0xb5 ^ (val1 & 0xFF);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-
-#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h
similarity index 67%
rename from arch/arm/plat-omap/include/plat/gpmc.h
rename to arch/arm/mach-omap2/gpmc.h
index 2e6e259..79f4dfc 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -11,6 +11,8 @@
#ifndef __OMAP2_GPMC_H
#define __OMAP2_GPMC_H
+#include <linux/platform_data/mtd-nand-omap2.h>
+
/* Maximum Number of Chip Selects */
#define GPMC_CS_NUM 8
@@ -32,15 +34,6 @@
#define GPMC_SET_IRQ_STATUS 0x00000004
#define GPMC_CONFIG_WP 0x00000005
-#define GPMC_GET_IRQ_STATUS 0x00000006
-#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND 0x0000000a
-#define GPMC_NAND_ADDRESS 0x0000000b
-#define GPMC_NAND_DATA 0x0000000c
-
#define GPMC_ENABLE_IRQ 0x0000000d
/* ECC commands */
@@ -76,25 +69,10 @@
#define GPMC_DEVICETYPE_NOR 0
#define GPMC_DEVICETYPE_NAND 2
#define GPMC_CONFIG_WRITEPROTECT 0x00000010
-#define GPMC_STATUS_BUFF_EMPTY 0x00000001
#define WR_RD_PIN_MONITORING 0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
#define GPMC_IRQ_FIFOEVENTENABLE 0x01
#define GPMC_IRQ_COUNT_EVENT 0x02
-#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
-#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
-
-enum omap_ecc {
- /* 1-bit ecc: stored at end of spare area */
- OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
- OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
- /* 1-bit ecc: stored at beginning of spare area as romcode */
- OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
- OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
- OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
/*
* Note that all values in this struct are in nanoseconds except sync_clk
@@ -133,22 +111,6 @@
u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
-struct gpmc_nand_regs {
- void __iomem *gpmc_status;
- void __iomem *gpmc_nand_command;
- void __iomem *gpmc_nand_address;
- void __iomem *gpmc_nand_data;
- void __iomem *gpmc_prefetch_config1;
- void __iomem *gpmc_prefetch_config2;
- void __iomem *gpmc_prefetch_control;
- void __iomem *gpmc_prefetch_status;
- void __iomem *gpmc_ecc_config;
- void __iomem *gpmc_ecc_control;
- void __iomem *gpmc_ecc_size_config;
- void __iomem *gpmc_ecc1_result;
- void __iomem *gpmc_bch_result0;
-};
-
extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
extern int gpmc_get_client_irq(unsigned irq_config);
@@ -160,31 +122,14 @@
extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_calc_divider(unsigned int sync_clk);
extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
- unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
- int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
#endif
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index e003f2b..3da8900 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -27,8 +27,8 @@
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "hdq1w.h"
#include "common.h"
diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h
index 0c1efc8..c7e08d2 100644
--- a/arch/arm/mach-omap2/hdq1w.h
+++ b/arch/arm/mach-omap2/hdq1w.h
@@ -21,7 +21,7 @@
#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
/*
* XXX A future cleanup patch should modify
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 4d3a632..4a96433 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,14 +14,14 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/mmc.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "mux.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 8763c85..1df9b5f 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -21,8 +21,8 @@
#include <linux/err.h>
#include <linux/hwspinlock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
.base_id = 0,
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fc57e67..4e63097 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,11 +19,13 @@
*
*/
-#include <plat/i2c.h>
+#include "soc.h"
#include "common.h"
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "mux.h"
+#include "i2c.h"
/* In register I2C_CON, Bit 15 is the I2C enable bit */
#define I2C_EN BIT(15)
@@ -33,7 +35,9 @@
/* Maximum microseconds to wait for OMAP module to softreset */
#define MAX_MODULE_SOFTRESET_WAIT 10000
-void __init omap2_i2c_mux_pins(int bus_id)
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
+
+static void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -104,3 +108,62 @@
return 0;
}
+
+static int __init omap_i2c_nr_ports(void)
+{
+ int ports = 0;
+
+ if (cpu_is_omap24xx())
+ ports = 2;
+ else if (cpu_is_omap34xx())
+ ports = 3;
+ else if (cpu_is_omap44xx())
+ ports = 4;
+ return ports;
+}
+
+static const char name[] = "omap_i2c";
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+ int bus_id)
+{
+ int l;
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+ struct omap_i2c_bus_platform_data *pdata;
+ struct omap_i2c_dev_attr *dev_attr;
+
+ if (bus_id > omap_i2c_nr_ports())
+ return -EINVAL;
+
+ omap2_i2c_mux_pins(bus_id);
+
+ l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+ WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+ "String buffer overflow in I2C%d device setup\n", bus_id);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -EEXIST;
+ }
+
+ pdata = i2c_pdata;
+ /*
+ * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+ * use, and functionality implementation flags, up to the OMAP I2C
+ * driver via platform data
+ */
+ pdata->rev = oh->class->rev;
+
+ dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+ pdata->flags = dev_attr->flags;
+
+ pdev = omap_device_build(name, bus_id, oh, pdata,
+ sizeof(struct omap_i2c_bus_platform_data),
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
+
+ return PTR_RET(pdev);
+}
+
diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h
new file mode 100644
index 0000000..42b6f2e
--- /dev/null
+++ b/arch/arm/mach-omap2/i2c.h
@@ -0,0 +1,42 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+
+#ifndef __MACH_OMAP2_I2C_H
+#define __MACH_OMAP2_I2C_H
+
+/**
+ * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
+ * @fifo_depth: total controller FIFO size (in bytes)
+ * @flags: differences in hardware support capability
+ *
+ * @fifo_depth represents what exists on the hardware, not what is
+ * actually configured at runtime by the device driver.
+ */
+struct omap_i2c_dev_attr {
+ u8 fifo_depth;
+ u32 flags;
+};
+
+int omap_i2c_reset(struct omap_hwmod *oh);
+
+#endif /* __MACH_OMAP2_I2C_H */
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 93d10de..cfaed13 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include <mach/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
deleted file mode 100644
index 5621cc5..0000000
--- a/arch/arm/mach-omap2/include/mach/gpio.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/gpio.h
- */
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
similarity index 87%
rename from arch/arm/plat-omap/include/plat/serial.h
rename to arch/arm/mach-omap2/include/mach/serial.h
index b780470..70eda00 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/mach-omap2/include/mach/serial.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
@@ -10,11 +8,6 @@
* GNU General Public License for more details.
*/
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
/*
* Memory entry used for the DEBUG_LL UART configuration, relative to
* start of RAM. See also uncompress.h and debug-macro.S.
@@ -29,11 +22,6 @@
*/
#define OMAP_UART_INFO_OFS 0x3ffc
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE 0xfffb0000
-#define OMAP1_UART2_BASE 0xfffb0800
-#define OMAP1_UART3_BASE 0xfffb9800
-
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
@@ -76,20 +64,14 @@
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
-#define OMAP7XX_PORT_SHIFT 0
#define ZOOM_PORT_SHIFT 1
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
-#define OMAP1UART1 11
-#define OMAP1UART2 12
-#define OMAP1UART3 13
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23
@@ -119,5 +101,3 @@
extern void omap_serial_init_port(struct omap_board_data *bdata,
struct omap_uart_port_info *platform_data);
#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 78e0557b..8e3546d 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -1,5 +1,176 @@
/*
- * arch/arm/mach-omap2/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include <mach/serial.h>
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP2(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP4UART##p)
+
+#define DEBUG_LL_OMAP5(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP5UART##p)
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach) \
+ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+#define DEBUG_LL_TI81XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI81XXUART##p)
+
+#define DEBUG_LL_AM33XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ AM33XXUART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap2 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap_2430sdp);
+ DEBUG_LL_OMAP2(1, omap_apollon);
+ DEBUG_LL_OMAP2(1, omap_h4);
+
+ /* omap2 based boards using UART3 */
+ DEBUG_LL_OMAP2(3, nokia_n800);
+ DEBUG_LL_OMAP2(3, nokia_n810);
+ DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+ /* omap3 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap3evm);
+ DEBUG_LL_OMAP3(1, omap_3430sdp);
+ DEBUG_LL_OMAP3(1, omap_3630sdp);
+ DEBUG_LL_OMAP3(1, omap3530_lv_som);
+ DEBUG_LL_OMAP3(1, omap3_torpedo);
+
+ /* omap3 based boards using UART3 */
+ DEBUG_LL_OMAP3(3, cm_t35);
+ DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
+ DEBUG_LL_OMAP3(3, craneboard);
+ DEBUG_LL_OMAP3(3, devkit8000);
+ DEBUG_LL_OMAP3(3, igep0020);
+ DEBUG_LL_OMAP3(3, igep0030);
+ DEBUG_LL_OMAP3(3, nokia_rm680);
+ DEBUG_LL_OMAP3(3, nokia_rm696);
+ DEBUG_LL_OMAP3(3, nokia_rx51);
+ DEBUG_LL_OMAP3(3, omap3517evm);
+ DEBUG_LL_OMAP3(3, omap3_beagle);
+ DEBUG_LL_OMAP3(3, omap3_pandora);
+ DEBUG_LL_OMAP3(3, omap_ldp);
+ DEBUG_LL_OMAP3(3, overo);
+ DEBUG_LL_OMAP3(3, touchbook);
+
+ /* omap4 based boards using UART3 */
+ DEBUG_LL_OMAP4(3, omap_4430sdp);
+ DEBUG_LL_OMAP4(3, omap4_panda);
+
+ /* omap5 based boards using UART3 */
+ DEBUG_LL_OMAP5(3, omap5_sevm);
+
+ /* zoom2/3 external uart */
+ DEBUG_LL_ZOOM(omap_zoom2);
+ DEBUG_LL_ZOOM(omap_zoom3);
+
+ /* TI8168 base boards using UART3 */
+ DEBUG_LL_TI81XX(3, ti8168evm);
+
+ /* TI8148 base boards using UART1 */
+ DEBUG_LL_TI81XX(1, ti8148evm);
+
+ /* AM33XX base boards using UART1 */
+ DEBUG_LL_AM33XX(1, am335xevm);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4234d28..807b8d9 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -25,14 +25,9 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <plat/serial.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "omap_hwmod.h"
#include "soc.h"
#include "iomap.h"
#include "voltage.h"
@@ -43,6 +38,10 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
+#include "omap-pm.h"
+#include "sdrc.h"
+#include "serial.h"
+#include "sram.h"
/*
* The machine specific code may provide the extra mapping besides the
@@ -354,11 +353,6 @@
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
-static void __init omap_common_init_early(void)
-{
- omap_init_consistent_dma_size();
-}
-
static void __init omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
@@ -379,7 +373,6 @@
{
omap2_set_globals_242x();
omap2xxx_check_revision();
- omap_common_init_early();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
@@ -401,7 +394,6 @@
{
omap2_set_globals_243x();
omap2xxx_check_revision();
- omap_common_init_early();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
@@ -428,7 +420,6 @@
omap2_set_globals_3xxx();
omap3xxx_check_revision();
omap3xxx_check_features();
- omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
@@ -462,7 +453,6 @@
omap2_set_globals_ti81xx();
omap3xxx_check_revision();
ti81xx_check_features();
- omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
@@ -520,7 +510,6 @@
omap2_set_globals_am33xx();
omap3xxx_check_revision();
ti81xx_check_features();
- omap_common_init_early();
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
@@ -536,7 +525,6 @@
omap2_set_globals_443x();
omap4xxx_check_revision();
omap4xxx_check_features();
- omap_common_init_early();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
@@ -558,7 +546,6 @@
{
omap2_set_globals_5xxx();
omap5xxx_check_revision();
- omap_common_init_early();
}
#endif
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 37f8f94..a106c75 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,11 +19,12 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-
-#include <plat/dma.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
+#include <plat-omap/dma-omap.h>
+
+#include "omap_device.h"
+
/*
* FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
* Sidetone needs non-gated ICLK and sidetone autoidle is broken.
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
new file mode 100644
index 0000000..0cd4b08
--- /dev/null
+++ b/arch/arm/mach-omap2/mmc.h
@@ -0,0 +1,23 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP24XX_NR_MMC 2
+#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
+#define OMAP2_MMC1_BASE 0x4809c000
+
+#define OMAP4_MMC_REG_OFFSET 0x100
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
+#else
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+}
+#endif
+
+struct omap_hwmod;
+int omap_msdi_reset(struct omap_hwmod *oh);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+ int is_closed);
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 9e57b4a..627e97e 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -25,13 +25,12 @@
#include <linux/err.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/mmc.h>
-
#include "common.h"
#include "control.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "mux.h"
+#include "mmc.h"
/*
* MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 701e17c..2612634 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -36,8 +36,9 @@
#include <linux/interrupt.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "soc.h"
#include "control.h"
#include "mux.h"
#include "prm.h"
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index df298d4..a6a4ff8 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -13,7 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <plat/iommu.h>
+#include <linux/platform_data/iommu-omap.h>
#include "soc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index c8bc3ad..aac46bf 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,6 +50,7 @@
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
+#include "soc.h"
#include "common.h"
#include "omap44xx.h"
#include "omap4-sar-layout.h"
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c
similarity index 98%
rename from arch/arm/plat-omap/omap-pm-noop.c
rename to arch/arm/mach-omap2/omap-pm-noop.c
index 9722f41..6a3be2b 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/mach-omap2/omap-pm-noop.c
@@ -22,9 +22,8 @@
#include <linux/device.h>
#include <linux/platform_device.h>
-/* Interface documentation is in mach/omap-pm.h */
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
+#include "omap-pm.h"
static bool off_mode_enabled;
static int dummy_context_loss_counter;
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/omap-pm.h
rename to arch/arm/mach-omap2/omap-pm.h
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index e089e4d..b970440 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -18,7 +18,6 @@
#include <asm/cacheflush.h>
#include <asm/memblock.h>
-#include <plat/omap-secure.h>
#include "omap-secure.h"
static phys_addr_t omap_secure_memblock_base;
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index c90a435..0e72917 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -52,6 +52,13 @@
u32 arg1, u32 arg2, u32 arg3, u32 arg4);
extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
extern phys_addr_t omap_secure_ram_mempool_base(void);
+extern int omap_secure_ram_reserve_memblock(void);
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
#endif /* __ASSEMBLER__ */
#endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6f94b4e..eda316a 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -27,16 +27,14 @@
#include <asm/memblock.h>
#include <asm/smp_twd.h>
-#include <plat/sram.h>
-#include <plat/omap-secure.h>
-#include <plat/mmc.h>
-
#include "omap-wakeupgen.h"
-
#include "soc.h"
#include "common.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "omap4-sar-layout.h"
+#include "omap-secure.h"
+#include "sram.h"
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/mach-omap2/omap_device.c
similarity index 99%
rename from arch/arm/plat-omap/omap_device.c
rename to arch/arm/mach-omap2/omap_device.c
index 7a7d1f2..0ef934f 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -89,9 +89,8 @@
#include <linux/of.h>
#include <linux/notifier.h>
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/clock.h>
+#include "omap_device.h"
+#include "omap_hwmod.h"
/* These parameters are passed to _omap_device_{de,}activate() */
#define USE_WAKEUP_LAT 0
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/mach-omap2/omap_device.h
similarity index 99%
rename from arch/arm/plat-omap/include/plat/omap_device.h
rename to arch/arm/mach-omap2/omap_device.h
index 106f506..0933c59 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -34,7 +34,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
extern struct dev_pm_domain omap_device_pm_domain;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 87cc6d0..437fbc5 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -139,18 +139,19 @@
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
+#include "clock.h"
+#include "omap_hwmod.h"
#include <plat/prcm.h>
#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
#include "cminst44xx.h"
#include "cm33xx.h"
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
#include "prm44xx.h"
#include "prm33xx.h"
#include "prminst44xx.h"
@@ -2703,7 +2704,7 @@
/* Static functions intended only for use in soc_ops field function pointers */
/**
- * _omap2_wait_target_ready - wait for a module to leave slave idle
+ * _omap2xxx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
@@ -2711,7 +2712,7 @@
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
-static int _omap2_wait_target_ready(struct omap_hwmod *oh)
+static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
@@ -2724,9 +2725,36 @@
/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
- return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
- oh->prcm.omap2.idlest_reg_id,
- oh->prcm.omap2.idlest_idle_bit);
+ return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
+}
+
+/**
+ * _omap3xxx_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return -EINVAL;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ if (!_find_mpu_rt_port(oh))
+ return 0;
+
+ /* XXX check module SIDLEMODE, hardreset status, enabled clocks */
+
+ return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
}
/**
@@ -3994,8 +4022,13 @@
*/
void __init omap_hwmod_init(void)
{
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- soc_ops.wait_target_ready = _omap2_wait_target_ready;
+ if (cpu_is_omap24xx()) {
+ soc_ops.wait_target_ready = _omap2xxx_wait_target_ready;
+ soc_ops.assert_hardreset = _omap2_assert_hardreset;
+ soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
+ soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+ } else if (cpu_is_omap34xx()) {
+ soc_ops.wait_target_ready = _omap3xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
similarity index 99%
rename from arch/arm/plat-omap/include/plat/omap_hwmod.h
rename to arch/arm/mach-omap2/omap_hwmod.h
index 1db0294..87a3c5b 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -35,7 +35,6 @@
#include <linux/list.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
-#include <plat/cpu.h>
struct omap_device;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index b5db600..a8b3368 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -12,21 +12,24 @@
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
+
+#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
-#include <plat/mmc.h>
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "serial.h"
#include "wd_timer.h"
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c455e41..dc768c5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,21 +12,23 @@
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
-#include <plat/mmc.h>
+
+#include "omap_hwmod.h"
+#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
+#include "i2c.h"
#include "wd_timer.h"
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index cbb4ef6..0413dab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -13,8 +13,7 @@
*/
#include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 8851bbb..40d6c93 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -9,13 +9,14 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
-#include <plat/dma.h>
-#include <plat/common.h>
+
+#include <plat-omap/dma-omap.h>
+
+#include "omap_hwmod.h"
#include "hdq1w.h"
#include "omap_hwmod_common_data.h"
+#include "dma.h"
/* UART */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 1a1287d..47901a5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -13,10 +13,10 @@
*/
#include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
+#include "serial.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index bd9220e..a0116d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -8,13 +8,13 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+
#include <linux/platform_data/gpio-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 59d5c1c..ad8d43b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -14,13 +14,11 @@
* GNU General Public License for more details.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
+#include <linux/i2c-omap.h>
+
+#include "omap_hwmod.h"
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
-#include <plat/i2c.h>
#include "omap_hwmod_common_data.h"
@@ -28,6 +26,8 @@
#include "cm33xx.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
+#include "i2c.h"
+#include "mmc.h"
/*
* IP blocks
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f67b7ee..1150f82 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -14,28 +14,32 @@
*
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
+#include <plat-omap/dma-omap.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
-#include <plat/i2c.h>
-#include <plat/mmc.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/platform_data/iommu-omap.h>
#include <plat/dmtimer.h>
-#include <plat/iommu.h>
#include "am35xx.h"
#include "soc.h"
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
+
+#include "dma.h"
+#include "i2c.h"
+#include "mmc.h"
#include "wd_timer.h"
+#include "serial.h"
/*
* OMAP3xxx hardware module integration data
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 0b1249e..caf946d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,22 +22,23 @@
#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/omap_ocp2scp.h>
+#include <linux/i2c-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/i2c.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/mmc.h>
+#include <linux/platform_data/iommu-omap.h>
#include <plat/dmtimer.h>
-#include <plat/common.h>
-#include <plat/iommu.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
+#include "i2c.h"
+#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 9f1ccdc..79d623b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -16,7 +16,7 @@
* data and their integration with other OMAP modules and Linux.
*/
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 2bc8f17..cfcce29 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -13,7 +13,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "common.h"
#include "display.h"
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index c784c12..7e437bf 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -19,7 +19,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
#define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "voltage.h"
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index d992db8..4d76a3c 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -27,11 +27,11 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/usb.h>
-
-#include <plat/usb.h>
+#include <linux/usb/musb.h>
#include "soc.h"
#include "control.h"
+#include "usb.h"
void am35x_musb_reset(void)
{
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index f515a1a..2bf35dc 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/i2c/twl.h>
+#include "soc.h"
#include "voltage.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 58e16ae..bd41d59 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -20,7 +20,7 @@
#include <linux/opp.h>
#include <linux/cpu.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "omap_opp_data.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index 75cef5f..62772e0 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,6 +19,7 @@
*/
#include <linux/module.h>
+#include "soc.h"
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 46092cd..3cf4fdfd 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -27,12 +27,13 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
+#include "soc.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index ea61c32..331478f 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -20,10 +20,11 @@
#include <asm/system_misc.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap-pm.h"
+#include "omap_device.h"
#include "common.h"
+#include "soc.h"
#include "prcm-common.h"
#include "voltage.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 8af6cd6..13e1f43 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -31,21 +31,24 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <asm/fncpy.h>
+
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/system_misc.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "soc.h"
#include "common.h"
-#include "prm2xxx_3xxx.h"
+#include "clock.h"
+#include "prm2xxx.h"
#include "prm-regbits-24xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "sram.h"
#include "pm.h"
#include "control.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 3a904de..a8b43da 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -32,25 +32,25 @@
#include <trace/events/power.h>
+#include <asm/fncpy.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
-#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
-#include <plat/sdrc.h>
#include <plat/prcm.h>
-#include <plat/gpmc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "soc.h"
#include "common.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "gpmc.h"
#include "prm-regbits-34xx.h"
-
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
#include "pm.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/* pm34xx errata defined in pm.h */
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 04922d1..7da75ae 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <asm/system_misc.h>
+#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 031e2fb..250d909 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -15,8 +15,9 @@
#include <asm/pmu.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
static char *omap2_pmu_oh_names[] = {"mpu"};
static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index baee906..5277d56eb 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -22,8 +22,6 @@
#include <linux/atomic.h>
-#include <plat/cpu.h>
-
#include "voltage.h"
/* Powerdomain basic power states */
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
deleted file mode 100644
index 3950ccf..0000000
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * OMAP2 and OMAP3 powerdomain control
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-
-/* Common functions across OMAP2 and OMAP3 */
-static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL,
- OMAP_POWERSTATE_MASK);
-}
-
-static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTST,
- OMAP_POWERSTATEST_MASK);
-}
-
-static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
- omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
- m);
-}
-
-static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL, m);
-}
-
-static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 v;
-
- v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
- omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
- OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-/* Applicable only for OMAP3. Not supported on OMAP2 */
-static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST,
- OMAP3430_LASTPOWERSTATEENTERED_MASK);
-}
-
-static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTST,
- OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL,
- OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST,
- OMAP3430_LASTLOGICSTATEENTERED_MASK);
-}
-
-static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
-{
- switch (bank) {
- case 0:
- return OMAP3430_LASTMEM1STATEENTERED_MASK;
- case 1:
- return OMAP3430_LASTMEM2STATEENTERED_MASK;
- case 2:
- return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
- case 3:
- return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
- default:
- WARN_ON(1); /* should never happen */
- return -EEXIST;
- }
- return 0;
-}
-
-static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap3_get_mem_bank_lastmemst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST, m);
-}
-
-static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
- return 0;
-}
-
-static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
-{
- return omap2_prm_rmw_mod_reg_bits(0,
- 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-}
-
-static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
-{
- return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- 0, pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-}
-
-struct pwrdm_ops omap2_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
- .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
- .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
- .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
- .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
-};
-
-struct pwrdm_ops omap3_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
- .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
- .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
- .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
- .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
- .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
- .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
- .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
- .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
- .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
- .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
-};
diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c
deleted file mode 100644
index 67c5663..0000000
--- a/arch/arm/mach-omap2/powerdomain33xx.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * AM33XX Powerdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
- * <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm33xx.h"
-#include "prm-regbits-33xx.h"
-
-
-static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= OMAP_POWERSTATE_MASK;
- v >>= OMAP_POWERSTATE_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= OMAP_POWERSTATEST_MASK;
- v >>= OMAP_POWERSTATEST_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
- v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
- am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
- (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
- AM33XX_LASTPOWERSTATEENTERED_MASK,
- pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->logicretstate_mask;
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= AM33XX_LOGICSTATEST_MASK;
- v >>= AM33XX_LOGICSTATEST_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- u32 v, m;
-
- m = pwrdm->logicretstate_mask;
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->mem_on_mask[bank];
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->mem_ret_mask[bank];
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = pwrdm->mem_pwrst_mask[bank];
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = pwrdm->mem_retst_mask[bank];
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
- & OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-struct pwrdm_ops am33xx_pwrdm_operations = {
- .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
- .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
- .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
- .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
- .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
- .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
- .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
- .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
-};
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
deleted file mode 100644
index aceb4f4..0000000
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * OMAP4 powerdomain control
- *
- * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include "powerdomain.h"
-#include <plat/prcm.h>
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "prm-regbits-44xx.h"
-
-static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= OMAP_POWERSTATE_MASK;
- v >>= OMAP_POWERSTATE_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP_POWERSTATEST_MASK;
- v >>= OMAP_POWERSTATEST_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
- v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
- (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
- OMAP4430_LASTPOWERSTATEENTERED_MASK,
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTST);
- return 0;
-}
-
-static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 v;
-
- v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
- omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP4430_LOGICSTATEST_MASK;
- v >>= OMAP4430_LOGICSTATEST_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= OMAP4430_LOGICRETSTATE_MASK;
- v >>= OMAP4430_LOGICRETSTATE_SHIFT;
-
- return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
- * @pwrdm: struct powerdomain * to read the state for
- *
- * Reads the previous logic powerstate for a powerdomain. This
- * function must determine the previous logic powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next retention logic state to
- * see the actual value. In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether the logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
- int state;
-
- state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
- if (state == PWRDM_POWER_OFF)
- return PWRDM_POWER_OFF;
-
- if (state != PWRDM_POWER_RET)
- return PWRDM_POWER_RET;
-
- return omap4_pwrdm_read_logic_retst(pwrdm);
-}
-
-static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
- * @pwrdm: struct powerdomain * to read mem powerstate for
- * @bank: memory bank index
- *
- * Reads the previous memory powerstate for a powerdomain. This
- * function must determine the previous memory powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next memory retention state to
- * see the actual value. In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- int state;
-
- state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
- if (state == PWRDM_POWER_OFF)
- return PWRDM_POWER_OFF;
-
- if (state != PWRDM_POWER_RET)
- return PWRDM_POWER_RET;
-
- return omap4_pwrdm_read_mem_retst(pwrdm, bank);
-}
-
-static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
- pwrdm->prcm_offs,
- OMAP4_PM_PWSTST) &
- OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-struct pwrdm_ops omap4_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
- .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
- .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
- .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
- .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
- .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
- .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
- .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
- .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
- .pwrdm_wait_transition = omap4_pwrdm_wait_transition,
-};
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index 2385c1f..ba520d4 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include "soc.h"
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 0f51e03..cff270a 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -28,6 +28,7 @@
#include "common.h"
#include <plat/prcm.h>
+#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index 6ac96610..638da6d 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -14,7 +14,7 @@
* published by the Free Software Foundation.
*/
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
/* Bits shared between registers */
@@ -209,9 +209,13 @@
/* RM_RSTST_WKUP specific bits */
/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP24XX_EXTWMPU_RST_SHIFT 6
#define OMAP24XX_EXTWMPU_RST_MASK (1 << 6)
+#define OMAP24XX_SECU_WD_RST_SHIFT 5
#define OMAP24XX_SECU_WD_RST_MASK (1 << 5)
+#define OMAP24XX_MPU_WD_RST_SHIFT 4
#define OMAP24XX_MPU_WD_RST_MASK (1 << 4)
+#define OMAP24XX_SECU_VIOL_RST_SHIFT 3
#define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3)
/* PM_WKEN_WKUP specific bits */
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 64c087a..838b594 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -14,7 +14,7 @@
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
/* Shared register bits */
@@ -509,15 +509,25 @@
#define OMAP3430_RSTTIME1_MASK (0xff << 0)
/* PRM_RSTST */
+#define OMAP3430_ICECRUSHER_RST_SHIFT 10
#define OMAP3430_ICECRUSHER_RST_MASK (1 << 10)
+#define OMAP3430_ICEPICK_RST_SHIFT 9
#define OMAP3430_ICEPICK_RST_MASK (1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT 8
#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT 7
#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST_SHIFT 6
#define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6)
+#define OMAP3430_SECURE_WD_RST_SHIFT 5
#define OMAP3430_SECURE_WD_RST_MASK (1 << 5)
+#define OMAP3430_MPU_WD_RST_SHIFT 4
#define OMAP3430_MPU_WD_RST_MASK (1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST_SHIFT 3
#define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3)
+#define OMAP3430_GLOBAL_SW_RST_SHIFT 1
#define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST_SHIFT 0
#define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0)
/* PRM_VOLTCTRL */
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 39d5621..c30ab5d 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -52,5 +52,58 @@
#define OMAP_POWERSTATE_SHIFT 0
#define OMAP_POWERSTATE_MASK (0x3 << 0)
+/*
+ * Standardized OMAP reset source bits
+ *
+ * To the extent these happen to match the hardware register bit
+ * shifts, it's purely coincidental. Used by omap-wdt.c.
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT is a special value, used whenever
+ * there are any bits remaining in the global PRM_RSTST register that
+ * haven't been identified, or when the PRM code for the current SoC
+ * doesn't know how to interpret the register.
+ */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
+#define OMAP_SECU_VIOL_RST_SRC_ID_SHIFT 2
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+#define OMAP_SECU_WD_RST_SRC_ID_SHIFT 4
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
+#define OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT 6
+#define OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT 7
+#define OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT 8
+#define OMAP_ICEPICK_RST_SRC_ID_SHIFT 9
+#define OMAP_ICECRUSHER_RST_SRC_ID_SHIFT 10
+#define OMAP_C2C_RST_SRC_ID_SHIFT 11
+#define OMAP_UNKNOWN_RST_SRC_ID_SHIFT 12
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct prm_reset_src_map - map register bitshifts to standard bitshifts
+ * @reg_shift: bitshift in the PRM reset source register
+ * @std_shift: bitshift equivalent in the standard reset source list
+ *
+ * The fields are signed because -1 is used as a terminator.
+ */
+struct prm_reset_src_map {
+ s8 reg_shift;
+ s8 std_shift;
+};
+
+/**
+ * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations
+ * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl
+ */
+struct prm_ll_data {
+ u32 (*read_reset_sources)(void);
+};
+
+extern int prm_register(struct prm_ll_data *pld);
+extern int prm_unregister(struct prm_ll_data *pld);
+
+extern u32 prm_read_reset_sources(void);
+
+#endif
+
#endif
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
new file mode 100644
index 0000000..e2860f9
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -0,0 +1,126 @@
+/*
+ * OMAP2xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "clockdomain.h"
+#include "prm2xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
+ * hardware register (which are specific to the OMAP2xxx SoCs) to
+ * reset source ID bit shifts (which is an OMAP SoC-independent
+ * enumeration)
+ */
+static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = {
+ { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+ { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
+/**
+ * omap2xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap2xxx_prm_read_reset_sources(void)
+{
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+ p = omap2xxx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
+ }
+
+ return r;
+}
+
+int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+ clkdm->pwrdm.ptr->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+ return 0;
+}
+
+int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+ clkdm->pwrdm.ptr->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+ return 0;
+}
+
+struct pwrdm_ops omap2_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
+ .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
+ .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
+ .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
+ .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap2xxx_prm_ll_data = {
+ .read_reset_sources = &omap2xxx_prm_read_reset_sources,
+};
+
+static int __init omap2xxx_prm_init(void)
+{
+ if (!cpu_is_omap24xx())
+ return 0;
+
+ return prm_register(&omap2xxx_prm_ll_data);
+}
+subsys_initcall(omap2xxx_prm_init);
+
+static void __exit omap2xxx_prm_exit(void)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap2xxx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap2xxx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
new file mode 100644
index 0000000..1d97112
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -0,0 +1,132 @@
+/*
+ * OMAP2xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP2420_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+
+/*
+ * OMAP2-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ *
+ */
+
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+/*
+ * Module specific PRM register offsets from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ */
+
+/* Register offsets appearing on both OMAP2 and OMAP3 */
+
+#define OMAP2_RM_RSTCTRL 0x0050
+#define OMAP2_RM_RSTTIME 0x0054
+#define OMAP2_RM_RSTST 0x0058
+#define OMAP2_PM_PWSTCTRL 0x00e0
+#define OMAP2_PM_PWSTST 0x00e4
+
+#define PM_WKEN 0x00a0
+#define PM_WKEN1 PM_WKEN
+#define PM_WKST 0x00b0
+#define PM_WKST1 PM_WKST
+#define PM_WKDEP 0x00c8
+#define PM_EVGENCTRL 0x00d4
+#define PM_EVGENONTIM 0x00d8
+#define PM_EVGENOFFTIM 0x00dc
+
+/* OMAP2xxx specific register offsets */
+#define OMAP24XX_PM_WKEN2 0x00a4
+#define OMAP24XX_PM_WKST2 0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
+
+#ifndef __ASSEMBLER__
+/* Function prototypes */
+extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
+extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
+
+extern int __init prm2xxx_init(void);
+extern int __exit prm2xxx_exit(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9529984..30517f5 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -15,82 +15,12 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/irq.h>
-#include <plat/prcm.h>
-
-#include "soc.h"
#include "common.h"
-#include "vp.h"
-
+#include "powerdomain.h"
#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-static const struct omap_prcm_irq omap3_prcm_irqs[] = {
- OMAP_PRCM_IRQ("wkup", 0, 0),
- OMAP_PRCM_IRQ("io", 9, 1),
-};
-
-static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
- .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
- .nr_regs = 1,
- .irqs = omap3_prcm_irqs,
- .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
- .irq = 11 + OMAP_INTC_START,
- .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
- .ocp_barrier = &omap3xxx_prm_ocp_barrier,
- .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
- .restore_irqen = &omap3xxx_prm_restore_irqen,
-};
-
-u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
- return __raw_readl(prm_base + module + idx);
-}
-
-void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __raw_writel(val, prm_base + module + idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- omap2_prm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(domain, idx);
- v &= mask;
- v >>= __ffs(mask);
-
- return v;
-}
-
-u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
+#include "clockdomain.h"
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
@@ -104,9 +34,6 @@
*/
int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
(1 << shift));
}
@@ -127,9 +54,6 @@
{
u32 mask;
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
mask = 1 << shift;
omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
@@ -156,9 +80,6 @@
u32 rst, st;
int c;
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
rst = 1 << rst_shift;
st = 1 << st_shift;
@@ -178,188 +99,155 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
-/* PRM VP */
-/*
- * struct omap3_vp - OMAP3 VP register access description.
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- */
-struct omap3_vp {
- u32 tranxdone_status;
-};
+/* Powerdomain low-level functions */
-static struct omap3_vp omap3_vp[] = {
- [OMAP3_VP_VDD_MPU_ID] = {
- .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
- },
- [OMAP3_VP_VDD_CORE_ID] = {
- .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
- },
-};
-
-#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
-
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
+/* Common functions across OMAP2 and OMAP3 */
+int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
- struct omap3_vp *vp = &omap3_vp[vp_id];
- u32 irqstatus;
-
- irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- return irqstatus & vp->tranxdone_status;
+ omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+ return 0;
}
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
- struct omap3_vp *vp = &omap3_vp[vp_id];
-
- omap2_prm_write_mod_reg(vp->tranxdone_status,
- OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL,
+ OMAP_POWERSTATE_MASK);
}
-u32 omap3_prm_vcvp_read(u8 offset)
+int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
- return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTST,
+ OMAP_POWERSTATEST_MASK);
}
-void omap3_prm_vcvp_write(u32 val, u8 offset)
+int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
{
- omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
{
- return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-/**
- * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
- * @events: ptr to a u32, preallocated by caller
- *
- * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
- * MPU IRQs, and store the result into the u32 pointed to by @events.
- * No return value.
- */
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
- u32 mask, st;
+ u32 m;
- /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
- mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
- events[0] = mask & st;
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
+ m);
}
-/**
- * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
- *
- * Force any buffered writes to the PRM IP block to complete. Needed
- * by the PRM IRQ handler, which reads and writes directly to the IP
- * block, to avoid race conditions after acknowledging or clearing IRQ
- * bits. No return value.
- */
-void omap3xxx_prm_ocp_barrier(void)
+int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
- omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL, m);
}
-/**
- * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
- * @saved_mask: ptr to a u32 array to save IRQENABLE bits
- *
- * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
- * must be allocated by the caller. Intended to be used in the PRM
- * interrupt handler suspend callback. The OCP barrier is needed to
- * ensure the write to disable PRM interrupts reaches the PRM before
- * returning; otherwise, spurious interrupts might occur. No return
- * value.
- */
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
- saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ u32 v;
- /* OCP barrier */
- omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+ v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK);
+ omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-/**
- * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
- * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
- *
- * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
- * to be used in the PRM interrupt handler resume callback to restore
- * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
- * barrier should be needed here; any pending PRM interrupts will fire
- * once the writes reach the PRM. No return value.
- */
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
- omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-}
+ u32 c = 0;
-/**
- * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
- *
- * Clear any previously-latched I/O wakeup events and ensure that the
- * I/O wakeup gates are aligned with the current mux settings. Works
- * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
- * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
- * return value.
- */
-void omap3xxx_prm_reconfigure_io_chain(void)
-{
- int i = 0;
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
+ /* XXX Is this udelay() value meaningful? */
+ while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
+ OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
- omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
- OMAP3430_ST_IO_CHAIN_MASK,
- MAX_IOPAD_LATCH_TIME, i);
- if (i == MAX_IOPAD_LATCH_TIME)
- pr_warn("PRM: I/O chain clock line assertion timed out\n");
-
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
-
- omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKST);
-
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
-}
-
-/**
- * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
- *
- * Activates the I/O wakeup event latches and allows events logged by
- * those latches to signal a wakeup event to the PRCM. For I/O
- * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
- * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
- * No return value.
- */
-static void __init omap3xxx_prm_enable_io_wakeup(void)
-{
- if (omap3_has_io_wakeup())
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
- PM_WKEN);
-}
-
-static int __init omap3xxx_prcm_init(void)
-{
- int ret = 0;
-
- if (cpu_is_omap34xx()) {
- omap3xxx_prm_enable_io_wakeup();
- ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- if (!ret)
- irq_set_status_flags(omap_prcm_event_to_irq("io"),
- IRQ_NOAUTOEN);
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
}
- return ret;
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
}
-subsys_initcall(omap3xxx_prcm_init);
+
+int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ PM_WKDEP, (1 << clkdm2->dep_bit));
+}
+
+int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ /* PRM accesses are slow, so minimize them */
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->wkdep_usecount, 0);
+ }
+
+ omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ PM_WKDEP);
+ return 0;
+}
+
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index c19d249..3330b1b 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -1,7 +1,7 @@
/*
- * OMAP2/3 Power/Reset Management (PRM) register definitions
+ * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions
*
- * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
@@ -19,160 +19,6 @@
#include "prcm-common.h"
#include "prm.h"
-#define OMAP2420_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-#define OMAP34XX_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-
-
-/*
- * OMAP2-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET 0x0000
-#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
-#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
-#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
-#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
-#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
-#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-/*
- * OMAP3-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- */
-
-#define OMAP3_PRM_REVISION_OFFSET 0x0004
-#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
-#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
-#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
-#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
-#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
-#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
-#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3_PRM_RSTST_OFFSET 0x0058
-#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
-#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
-#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
-#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
-#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
-#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
-#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
-#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
-#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
-#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
-#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
-#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
@@ -200,66 +46,83 @@
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
-/* OMAP2xxx specific register offsets */
-#define OMAP24XX_PM_WKEN2 0x00a4
-#define OMAP24XX_PM_WKST2 0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
-
-/* OMAP3 specific register offsets */
-#define OMAP3430ES2_PM_WKEN3 0x00f0
-#define OMAP3430ES2_PM_WKST3 0x00b8
-
-#define OMAP3430_PM_MPUGRPSEL 0x00a4
-#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
-#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
-
-#define OMAP3430_PM_IVAGRPSEL 0x00a8
-#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
-#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
-
-#define OMAP3430_PM_PREPWSTST 0x00e8
-
-#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
-#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
-
#ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+#include "powerdomain.h"
+
/* Power/reset management domain register get/set */
-extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(prm_base + module + idx);
+}
+
+static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, prm_base + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+ s16 idx)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ omap2_prm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
+extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm);
-/*
- * OMAP3 access functions for voltage controller (VC) and
- * voltage proccessor (VP) in the PRM.
- */
-extern u32 omap3_prm_vcvp_read(u8 offset);
-extern void omap3_prm_vcvp_write(u32 val, u8 offset);
-extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-
-extern void omap3xxx_prm_reconfigure_io_chain(void);
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
#endif /* __ASSEMBLER */
@@ -348,7 +211,9 @@
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
+#define OMAP_GLOBALWARM_RST_SHIFT 1
#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
+#define OMAP_GLOBALCOLD_RST_SHIFT 0
#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
/*
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index e7dbb6c..1ac7388 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -19,9 +19,8 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
-
#include "common.h"
+#include "powerdomain.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
@@ -133,3 +132,204 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+ v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+ (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+ AM33XX_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LOGICSTATEST_MASK;
+ v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v, m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_on_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_ret_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_pwrst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_retst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+ & OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
+ .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
+ .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
+ .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
+};
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
new file mode 100644
index 0000000..1fea656
--- /dev/null
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -0,0 +1,403 @@
+/*
+ * OMAP3xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "prm3xxx.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-34xx.h"
+
+static const struct omap_prcm_irq omap3_prcm_irqs[] = {
+ OMAP_PRCM_IRQ("wkup", 0, 0),
+ OMAP_PRCM_IRQ("io", 9, 1),
+};
+
+static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
+ .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
+ .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
+ .nr_regs = 1,
+ .irqs = omap3_prcm_irqs,
+ .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
+ .irq = 11 + OMAP_INTC_START,
+ .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
+ .ocp_barrier = &omap3xxx_prm_ocp_barrier,
+ .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
+ .restore_irqen = &omap3xxx_prm_restore_irqen,
+};
+
+/*
+ * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
+ * register (which are specific to OMAP3xxx SoCs) to reset source ID
+ * bit shifts (which is an OMAP SoC-independent enumeration)
+ */
+static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
+ { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
+ OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+ { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
+ OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+ { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+ { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+ u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+ [OMAP3_VP_VDD_MPU_ID] = {
+ .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+ },
+ [OMAP3_VP_VDD_CORE_ID] = {
+ .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+ },
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+
+ omap2_prm_write_mod_reg(vp->tranxdone_status,
+ OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+ return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
+
+/**
+ * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to a u32, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the u32 pointed to by @events.
+ * No return value.
+ */
+void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+{
+ u32 mask, st;
+
+ /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
+ mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ events[0] = mask & st;
+}
+
+/**
+ * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete. Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits. No return value.
+ */
+void omap3xxx_prm_ocp_barrier(void)
+{
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
+ * must be allocated by the caller. Intended to be used in the PRM
+ * interrupt handler suspend callback. The OCP barrier is needed to
+ * ensure the write to disable PRM interrupts reaches the PRM before
+ * returning; otherwise, spurious interrupts might occur. No return
+ * value.
+ */
+void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+ saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
+ * to be used in the PRM interrupt handler resume callback to restore
+ * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
+ * barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM. No return value.
+ */
+void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+{
+ omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings. Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+ int i = 0;
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ OMAP3430_ST_IO_CHAIN_MASK,
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKST);
+
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+ if (omap3_has_io_wakeup())
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+ PM_WKEN);
+}
+
+/**
+ * omap3xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap3xxx_prm_read_reset_sources(void)
+{
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+ p = omap3xxx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
+ }
+
+ return r;
+}
+
+/* Powerdomain low-level functions */
+
+/* Applicable only for OMAP3. Not supported on OMAP2 */
+static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTPOWERSTATEENTERED_MASK);
+}
+
+static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTST,
+ OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL,
+ OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTLOGICSTATEENTERED_MASK);
+}
+
+static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
+{
+ switch (bank) {
+ case 0:
+ return OMAP3430_LASTMEM1STATEENTERED_MASK;
+ case 1:
+ return OMAP3430_LASTMEM2STATEENTERED_MASK;
+ case 2:
+ return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
+ case 3:
+ return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+ return 0;
+}
+
+static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ m = omap3_get_mem_bank_lastmemst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST, m);
+}
+
+static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+ return 0;
+}
+
+static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ return omap2_prm_rmw_mod_reg_bits(0,
+ 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+ pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+}
+
+static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+ 0, pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+}
+
+struct pwrdm_ops omap3_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
+ .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
+ .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
+ .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
+ .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
+ .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
+ .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
+ .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap3xxx_prm_ll_data = {
+ .read_reset_sources = &omap3xxx_prm_read_reset_sources,
+};
+
+static int __init omap3xxx_prm_init(void)
+{
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ ret = prm_register(&omap3xxx_prm_ll_data);
+ if (ret)
+ return ret;
+
+ omap3xxx_prm_enable_io_wakeup();
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+
+
+ return ret;
+}
+subsys_initcall(omap3xxx_prm_init);
+
+static void __exit omap3xxx_prm_exit(void)
+{
+ if (!cpu_is_omap34xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap3xxx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap3xxx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
new file mode 100644
index 0000000..a3c28a8
--- /dev/null
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -0,0 +1,160 @@
+/*
+ * OMAP3xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP34XX_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ */
+
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/* OMAP3 specific register offsets */
+#define OMAP3430ES2_PM_WKEN3 0x00f0
+#define OMAP3430ES2_PM_WKST3 0x00b8
+
+#define OMAP3430_PM_MPUGRPSEL 0x00a4
+#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
+
+#define OMAP3430_PM_IVAGRPSEL 0x00a8
+#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
+
+#define OMAP3430_PM_PREPWSTST 0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
+
+
+#ifndef __ASSEMBLER__
+
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
+/* PRM interrupt-related functions */
+extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+extern void omap3xxx_prm_ocp_barrier(void);
+extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
+extern u32 omap3xxx_prm_get_reset_sources(void);
+
+#endif /* __ASSEMBLER */
+
+
+#endif
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index f0c4d5f..a799e95 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -1,10 +1,11 @@
/*
* OMAP4 PRM module functions
*
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -27,6 +28,9 @@
#include "prm-regbits-44xx.h"
#include "prcm44xx.h"
#include "prminst44xx.h"
+#include "powerdomain.h"
+
+/* Static data */
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
@@ -46,6 +50,33 @@
.restore_irqen = &omap44xx_prm_restore_irqen,
};
+/*
+ * omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST
+ * hardware register (which are specific to OMAP44xx SoCs) to reset
+ * source ID bit shifts (which is an OMAP SoC-independent
+ * enumeration)
+ */
+static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
+ { OMAP4430_RST_GLOBAL_WARM_SW_SHIFT,
+ OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP4430_RST_GLOBAL_COLD_SW_SHIFT,
+ OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT,
+ OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP4430_MPU_WDT_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP4430_SECURE_WDT_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+ { OMAP4430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+ { OMAP4430_C2C_RST_SHIFT, OMAP_C2C_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
@@ -291,12 +322,324 @@
OMAP4_PRM_IO_PMCTRL_OFFSET);
}
-static int __init omap4xxx_prcm_init(void)
+/**
+ * omap44xx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap44xx_prm_read_reset_sources(void)
{
- if (cpu_is_omap44xx()) {
- omap44xx_prm_enable_io_wakeup();
- return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+ OMAP4_RM_RSTST);
+
+ p = omap44xx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
}
+
+ return r;
+}
+
+/* Powerdomain low-level functions */
+
+static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
return 0;
}
-subsys_initcall(omap4xxx_prcm_init);
+
+static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
+ v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+ (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
+ return 0;
+}
+
+static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
+ OMAP4430_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTST);
+ return 0;
+}
+
+static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 v;
+
+ v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+ omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP4430_LOGICSTATEST_MASK;
+ v >>= OMAP4430_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= OMAP4430_LOGICRETSTATE_MASK;
+ v >>= OMAP4430_LOGICRETSTATE_SHIFT;
+
+ return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
+ * @pwrdm: struct powerdomain * to read the state for
+ *
+ * Reads the previous logic powerstate for a powerdomain. This
+ * function must determine the previous logic powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next retention logic state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether the logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_logic_retst(pwrdm);
+}
+
+static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
+ * @pwrdm: struct powerdomain * to read mem powerstate for
+ * @bank: memory bank index
+ *
+ * Reads the previous memory powerstate for a powerdomain. This
+ * function must determine the previous memory powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next memory retention state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_mem_retst(pwrdm, bank);
+}
+
+static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
+ pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST) &
+ OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops omap4_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
+ .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
+ .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
+ .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
+ .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
+ .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
+ .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = omap4_pwrdm_wait_transition,
+};
+
+/*
+ * XXX document
+ */
+static struct prm_ll_data omap44xx_prm_ll_data = {
+ .read_reset_sources = &omap44xx_prm_read_reset_sources,
+};
+
+static int __init omap44xx_prm_init(void)
+{
+ int ret;
+
+ if (!cpu_is_omap44xx())
+ return 0;
+
+ ret = prm_register(&omap44xx_prm_ll_data);
+ if (ret)
+ return ret;
+
+ omap44xx_prm_enable_io_wakeup();
+
+ return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+}
+subsys_initcall(omap44xx_prm_init);
+
+static void __exit omap44xx_prm_exit(void)
+{
+ if (!cpu_is_omap44xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap44xx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap44xx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index ee72ae6..c8e1acc 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -771,6 +771,8 @@
extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
+extern u32 omap44xx_prm_get_reset_sources(void);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 6b4d332..945b4ad 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,10 +24,11 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <plat/common.h>
#include <plat/prcm.h>
#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "prm3xxx.h"
#include "prm44xx.h"
/*
@@ -53,6 +54,13 @@
*/
static struct omap_prcm_irq_setup *prcm_irq_setup;
+/*
+ * prm_ll_data: function pointers to SoC-specific implementations of
+ * common PRM functions
+ */
+static struct prm_ll_data null_prm_ll_data;
+static struct prm_ll_data *prm_ll_data = &null_prm_ll_data;
+
/* Private functions */
/*
@@ -319,64 +327,71 @@
return -ENOMEM;
}
-/*
- * Stubbed functions so that common files continue to build when
- * custom builds are used
- * XXX These are temporary and should be removed at the earliest possible
- * opportunity
+/**
+ * prm_read_reset_sources - return the sources of the SoC's last reset
+ *
+ * Return a u32 bitmask representing the reset sources that caused the
+ * SoC to reset. The low-level per-SoC functions called by this
+ * function remap the SoC-specific reset source bits into an
+ * OMAP-common set of reset source bits, defined in
+ * arch/arm/mach-omap2/prm.h. Returns the standardized reset source
+ * u32 bitmask from the hardware upon success, or returns (1 <<
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
+ * function was registered.
*/
-u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+u32 prm_read_reset_sources(void)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
+
+ if (prm_ll_data->read_reset_sources)
+ ret = prm_ll_data->read_reset_sources();
+ else
+ WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
+
+ return ret;
+}
+
+/**
+ * prm_register - register per-SoC low-level data with the PRM
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP PRM data and function pointers with
+ * the OMAP PRM common interface. The caller must keep the data
+ * pointed to by @pld valid until it calls prm_unregister() and
+ * it returns successfully. Returns 0 upon success, -EINVAL if @pld
+ * is NULL, or -EEXIST if prm_register() has already been called
+ * without an intervening prm_unregister().
+ */
+int prm_register(struct prm_ll_data *pld)
+{
+ if (!pld)
+ return -EINVAL;
+
+ if (prm_ll_data != &null_prm_ll_data)
+ return -EEXIST;
+
+ prm_ll_data = pld;
+
return 0;
}
-void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+/**
+ * prm_unregister - unregister per-SoC low-level data & function pointers
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP PRM data and function pointers
+ * that were previously registered with prm_register(). The
+ * caller may not destroy any of the data pointed to by @pld until
+ * this function returns successfully. Returns 0 upon success, or
+ * -EINVAL if @pld is NULL or if @pld does not match the struct
+ * prm_ll_data * previously registered by prm_register().
+ */
+int prm_unregister(struct prm_ll_data *pld)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
-}
+ if (!pld || prm_ll_data != pld)
+ return -EINVAL;
-u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
- s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ prm_ll_data = &null_prm_ll_data;
+
return 0;
}
-
-u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
- u8 st_shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
index 8bfaf34..1ee58c2 100644
--- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
+++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
@@ -11,7 +11,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Hynix H8MBX00U0MER-0EM */
static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
index a391b49..85cccc0 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -14,7 +14,7 @@
#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Micron MT46H32M32LF-6 */
/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
index 845c4fd..0fa7ffa 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -18,10 +18,8 @@
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
-#include <plat/sdrc.h>
-
#include "sdram-nokia.h"
+#include "sdrc.h"
/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
struct sdram_timings {
diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
index cd43529..003f7bf 100644
--- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
+++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
@@ -11,7 +11,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Numonyx M65KXXXXAM */
static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
index 0e518a7..8dc3de5 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -14,7 +14,7 @@
#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Qimonda HYB18M512160AF-6 */
static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index e3d345f..c64ee19 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -24,10 +24,7 @@
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
-#include <plat/sram.h>
-
-#include <plat/sdrc.h>
+#include "clock.h"
#include "sdrc.h"
static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
@@ -160,19 +157,3 @@
sdrc_write_reg(l, SDRC_POWER);
omap2_sms_save_context();
}
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_CONTROL(ctx));
-}
-
-void omap2_sms_write_rot_size(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_SIZE(ctx));
-}
-
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
-}
-
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index b3f8379..69c4b32 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -2,12 +2,14 @@
#define __ARCH_ARM_MACH_OMAP2_SDRC_H
/*
- * OMAP2 SDRC register definitions
+ * OMAP2/3 SDRC/SMS macros and prototypes
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
- * Written by Paul Walmsley
+ * Paul Walmsley
+ * Tony Lindgren
+ * Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,8 +17,6 @@
*/
#undef DEBUG
-#include <plat/sdrc.h>
-
#ifndef __ASSEMBLER__
#include <linux/io.h>
@@ -50,6 +50,58 @@
{
return __raw_readl(OMAP_SMS_REGADDR(reg));
}
+
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip. These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files. The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+ unsigned long rate;
+ u32 actim_ctrla;
+ u32 actim_ctrlb;
+ u32 rfr_ctrl;
+ u32 mr;
+};
+
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+struct memory_timings {
+ u32 m_type; /* ddr = 1, sdr = 0 */
+ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
+ u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
+ u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
+ u32 base_cs; /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+
#else
#define OMAP242X_SDRC_REGADDR(reg) \
OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
@@ -57,6 +109,7 @@
OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) \
OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+
#endif /* __ASSEMBLER__ */
/* Minimum frequency that the SDRC DLL can lock at */
@@ -74,4 +127,85 @@
*/
#define SDRC_MPURATE_LOOPS 96
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG 0x010
+#define SDRC_CS_CFG 0x040
+#define SDRC_SHARING 0x044
+#define SDRC_ERR_TYPE 0x04C
+#define SDRC_DLLA_CTRL 0x060
+#define SDRC_DLLA_STATUS 0x064
+#define SDRC_DLLB_CTRL 0x068
+#define SDRC_DLLB_STATUS 0x06C
+#define SDRC_POWER 0x070
+#define SDRC_MCFG_0 0x080
+#define SDRC_MR_0 0x084
+#define SDRC_EMR2_0 0x08c
+#define SDRC_ACTIM_CTRL_A_0 0x09c
+#define SDRC_ACTIM_CTRL_B_0 0x0a0
+#define SDRC_RFR_CTRL_0 0x0a4
+#define SDRC_MANUAL_0 0x0a8
+#define SDRC_MCFG_1 0x0B0
+#define SDRC_MR_1 0x0B4
+#define SDRC_EMR2_1 0x0BC
+#define SDRC_ACTIM_CTRL_A_1 0x0C4
+#define SDRC_ACTIM_CTRL_B_1 0x0C8
+#define SDRC_RFR_CTRL_1 0x0D4
+#define SDRC_MANUAL_1 0x0D8
+
+#define SDRC_POWER_AUTOCOUNT_SHIFT 8
+#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT 4
+#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+#define OMAP242X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG 0x010
+/* REVISIT: fill in other SMS registers here */
+
+
+
#endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 73e55e4..9072917 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,16 +24,13 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
#include "clock.h"
#include "sdrc.h"
+#include "sram.h"
/* Memory timing, DLL mode flags */
#define M_DDR 1
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a507cd6..aa30a3c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -28,19 +28,20 @@
#include <linux/console.h>
#include <plat/omap-serial.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-#include <plat/serial.h>
+#include <plat-omap/dma-omap.h>
+#include "common.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
+#include "soc.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
+#include "serial.h"
/*
* NOTE: By default the serial auto_suspend timeout is disabled as it causes
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
new file mode 100644
index 0000000..c4014f0
--- /dev/null
+++ b/arch/arm/mach-omap2/serial.h
@@ -0,0 +1 @@
+#include <mach/serial.h>
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 5069879..d1dedc8 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,13 +26,12 @@
#include <asm/assembler.h>
-#include <plat/sram.h>
-
#include "omap34xx.h"
#include "iomap.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
+#include "cm3xxx.h"
+#include "prm3xxx.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/*
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index fc9b96d..0700964 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -1,7 +1,473 @@
-#include <plat/cpu.h>
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
#include "omap24xx.h"
#include "omap34xx.h"
#include "omap44xx.h"
#include "ti81xx.h"
#include "am33xx.h"
#include "omap54xx.h"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap4
+# endif
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap5
+# endif
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME am33xx
+# endif
+#endif
+
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
+/*
+ * omap_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x(): True for OMAP2430
+ * cpu_is_omap343x(): True for OMAP3430
+ * cpu_is_omap443x(): True for OMAP4430
+ * cpu_is_omap446x(): True for OMAP4460
+ * cpu_is_omap447x(): True for OMAP4470
+ * soc_is_omap543x(): True for OMAP5430, OMAP5432
+ */
+#define GET_OMAP_CLASS (omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_AM_CLASS(class, id) \
+static inline int is_am ##class (void) \
+{ \
+ return (GET_AM_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id) \
+static inline int is_ti ##class (void) \
+{ \
+ return (GET_TI_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_TI_SUBCLASS(subclass, id) \
+static inline int is_ti ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_AM_SUBCLASS(subclass, id) \
+static inline int is_am ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
+IS_AM_CLASS(33xx, 0x33)
+
+IS_TI_CLASS(81xx, 0x81)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
+
+IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
+
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap242x() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap343x() 0
+#define cpu_is_ti81xx() 0
+#define cpu_is_ti816x() 0
+#define cpu_is_ti814x() 0
+#define soc_is_am35xx() 0
+#define soc_is_am33xx() 0
+#define soc_is_am335x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
+#define cpu_is_omap446x() 0
+#define cpu_is_omap447x() 0
+#define soc_is_omap54xx() 0
+#define soc_is_omap543x() 0
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() is_omap24xx()
+# endif
+# if defined (CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() is_omap242x()
+# endif
+# if defined (CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# undef cpu_is_omap343x
+# define cpu_is_omap34xx() is_omap34xx()
+# define cpu_is_omap343x() is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# define cpu_is_omap34xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP3430)
+# undef cpu_is_omap343x
+# define cpu_is_omap343x() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap2420(): True for OMAP2420
+ * cpu_is_omap2422(): True for OMAP2422
+ * cpu_is_omap2423(): True for OMAP2423
+ * cpu_is_omap2430(): True for OMAP2430
+ * cpu_is_omap3430(): True for OMAP3430
+ */
+#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap2420() 0
+#define cpu_is_omap2422() 0
+#define cpu_is_omap2423() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap3430() 0
+#define cpu_is_omap3630() 0
+#define soc_is_omap5430() 0
+
+/* These are needed for the common code */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+#define cpu_class_is_omap1() 0
+#define cpu_class_is_omap2() 1
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap2420
+# undef cpu_is_omap2422
+# undef cpu_is_omap2423
+# undef cpu_is_omap2430
+# define cpu_is_omap2420() is_omap2420()
+# define cpu_is_omap2422() is_omap2422()
+# define cpu_is_omap2423() is_omap2423()
+# define cpu_is_omap2430() is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap3430
+# undef cpu_is_ti81xx
+# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef soc_is_am35xx
+# define cpu_is_omap3430() is_omap3430()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630() is_omap363x()
+# define cpu_is_ti81xx() is_ti81xx()
+# define cpu_is_ti816x() is_ti816x()
+# define cpu_is_ti814x() is_ti814x()
+# define soc_is_am35xx() is_am35xx()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx() is_am33xx()
+# define soc_is_am335x() is_am335x()
+#endif
+
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# undef cpu_is_omap446x
+# undef cpu_is_omap447x
+# define cpu_is_omap44xx() is_omap44xx()
+# define cpu_is_omap443x() is_omap443x()
+# define cpu_is_omap446x() is_omap446x()
+# define cpu_is_omap447x() is_omap447x()
+# endif
+
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx() is_omap54xx()
+# define soc_is_omap543x() is_omap543x()
+#endif
+
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS 0x24200024
+#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
+
+#define OMAP243X_CLASS 0x24300024
+#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
+
+#define OMAP343X_CLASS 0x34300034
+#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
+
+#define OMAP363X_CLASS 0x36300034
+#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
+
+#define TI816X_CLASS 0x81600034
+#define TI8168_REV_ES1_0 TI816X_CLASS
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
+
+#define TI814X_CLASS 0x81400034
+#define TI8148_REV_ES1_0 TI814X_CLASS
+#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
+
+#define AM35XX_CLASS 0x35170034
+#define AM35XX_REV_ES1_0 AM35XX_CLASS
+#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
+
+#define AM335X_CLASS 0x33500033
+#define AM335X_REV_ES1_0 AM335X_CLASS
+
+#define OMAP443X_CLASS 0x44300044
+#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
+
+#define OMAP446X_CLASS 0x44600044
+#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8))
+
+#define OMAP447X_CLASS 0x44700044
+#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+
+#define OMAP54XX_CLASS 0x54000054
+#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
+
+/*
+ * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ * family have OS-level control over the I/O chain clock. This is
+ * to avoid a window during which wakeups could potentially be lost
+ * during powerdomain transitions. If this bit is set, it
+ * indicates that the chip does support OS-level control of this
+ * feature.
+ */
+extern u32 omap_features;
+
+#define OMAP3_HAS_L2CACHE BIT(0)
+#define OMAP3_HAS_IVA BIT(1)
+#define OMAP3_HAS_SGX BIT(2)
+#define OMAP3_HAS_NEON BIT(3)
+#define OMAP3_HAS_ISP BIT(4)
+#define OMAP3_HAS_192MHZ_CLK BIT(5)
+#define OMAP3_HAS_IO_WAKEUP BIT(6)
+#define OMAP3_HAS_SDRC BIT(7)
+#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
+#define OMAP4_HAS_MPU_1GHZ BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ BIT(11)
+
+
+#define OMAP3_HAS_FEATURE(feat,flag) \
+static inline unsigned int omap3_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP3_HAS_ ##flag; \
+} \
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
+
+/*
+ * Runtime detection of OMAP4 features
+ */
+#define OMAP4_HAS_FEATURE(feat, flag) \
+static inline unsigned int omap4_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP4_HAS_ ##flag; \
+} \
+
+OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
+OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
+OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+
+#endif /* __ASSEMBLY__ */
+
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index f8217a5..b0e77a4 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -23,8 +23,8 @@
#include <linux/slab.h>
#include <linux/io.h>
-#include <plat/omap_device.h>
-
+#include "soc.h"
+#include "omap_device.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
new file mode 100644
index 0000000..0ff0f06
--- /dev/null
+++ b/arch/arm/mach-omap2/sram.c
@@ -0,0 +1,305 @@
+/*
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "prm2xxx_3xxx.h"
+#include "sdrc.h"
+#include "sram.h"
+
+#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
+#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
+#else
+#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
+#endif
+#define OMAP5_SRAM_PA 0x40300000
+
+#define SRAM_BOOTLOADER_SZ 0x00
+
+#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
+
+#define GP_DEVICE 0x300
+
+#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
+
+static unsigned long omap_sram_start;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+
+/*
+ * Depending on the target RAMFS firewall setup, the public usable amount of
+ * SRAM varies. The default accessible size for all device types is 2k. A GP
+ * device allows ARM11 but not other initiators for full size. This
+ * functionality seems ok until some nice security API happens.
+ */
+static int is_sram_locked(void)
+{
+ if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
+ /* RAMFW: R/W access to all initiators for all qualifier sets */
+ if (cpu_is_omap242x()) {
+ __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+ }
+ if (cpu_is_omap34xx()) {
+ __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+ __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+ }
+ return 0;
+ } else
+ return 1; /* assume locked with no PPA or security driver */
+}
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_sram(void)
+{
+ omap_sram_skip = SRAM_BOOTLOADER_SZ;
+ if (is_sram_locked()) {
+ if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PUB_PA;
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ omap_sram_skip += SZ_16K;
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PUB_PA;
+ omap_sram_size = 0xa000; /* 40K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PUB_PA;
+ omap_sram_size = 0x800; /* 2K */
+ }
+ } else {
+ if (soc_is_am33xx()) {
+ omap_sram_start = AM33XX_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0xe000; /* 56K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PA;
+ if (cpu_is_omap242x())
+ omap_sram_size = 0xa0000; /* 640K */
+ else if (cpu_is_omap243x())
+ omap_sram_size = 0x10000; /* 64K */
+ }
+ }
+}
+
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+static void __init omap2_map_sram(void)
+{
+ int cached = 1;
+
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ if (cpu_is_omap44xx()) {
+ omap_sram_start += PAGE_SIZE;
+ omap_sram_size -= SZ_16K;
+ }
+#endif
+ if (cpu_is_omap34xx()) {
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ cached = 0;
+ }
+
+ omap_map_sram(omap_sram_start, omap_sram_size,
+ omap_sram_skip, cached);
+}
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+ BUG_ON(!_omap2_sram_ddr_init);
+ _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+ base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
+ _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+ BUG_ON(!_omap2_set_prcm);
+ return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+#ifdef CONFIG_SOC_OMAP2420
+static int __init omap242x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+ omap242x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+ omap242x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+ omap242x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+static int __init omap243x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+ omap243x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+ omap243x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+ omap243x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap3_sram_configure_core_dpll)(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
+{
+ BUG_ON(!_omap3_sram_configure_core_dpll);
+ return _omap3_sram_configure_core_dpll(
+ m2, unlock_dll, f, inc,
+ sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+ sdrc_actim_ctrl_b_0, sdrc_mr_0,
+ sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+ sdrc_actim_ctrl_b_1, sdrc_mr_1);
+}
+
+void omap3_sram_restore_context(void)
+{
+ omap_sram_reset();
+
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
+ omap_push_sram_idle();
+}
+
+static inline int omap34xx_sram_init(void)
+{
+ omap3_sram_restore_context();
+ return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+static inline int am33xx_sram_init(void)
+{
+ return 0;
+}
+
+int __init omap_sram_init(void)
+{
+ omap_detect_sram();
+ omap2_map_sram();
+
+ if (cpu_is_omap242x())
+ omap242x_sram_init();
+ else if (cpu_is_omap2430())
+ omap243x_sram_init();
+ else if (soc_is_am33xx())
+ am33xx_sram_init();
+ else if (cpu_is_omap34xx())
+ omap34xx_sram_init();
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
new file mode 100644
index 0000000..ca7277c
--- /dev/null
+++ b/arch/arm/mach-omap2/sram.h
@@ -0,0 +1,83 @@
+/*
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+#include <plat/sram.h>
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+
+/* Do not use these */
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA 0x40304000
+#define OMAP4_SRAM_VA 0xfe404000
+#else
+#define OMAP4_SRAM_PA 0x40300000
+#endif
+#define AM33XX_SRAM_PA 0x40300000
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 8f7326c..680a7c5 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -34,8 +34,8 @@
#include "soc.h"
#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "cm2xxx.h"
#include "sdrc.h"
.text
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index b140d65..a1e9edd 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -34,8 +34,8 @@
#include "soc.h"
#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "cm2xxx.h"
#include "sdrc.h"
.text
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2d0ceaa..1446331 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -32,7 +32,7 @@
#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
/*
* This file needs be built unconditionally as ARM to interoperate correctly
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 69e4663..c5bc2cb 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -43,10 +43,11 @@
#include <asm/sched_clock.h>
#include <asm/arch_timer.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
#include "soc.h"
#include "common.h"
@@ -559,6 +560,8 @@
if (timer_dev_attr)
pdata->timer_capability = timer_dev_attr->timer_capability;
+ pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+
pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
NULL, 0, 0);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index a256135..e49b40b 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -26,9 +26,6 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <plat/i2c.h>
-#include <plat/usb.h>
-
#include "soc.h"
#include "twl-common.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 3c43449..d1dbe12 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -25,10 +25,10 @@
#include <asm/io.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
+#include "soc.h"
+#include "omap_device.h"
#include "mux.h"
+#include "usb.h"
#ifdef CONFIG_MFD_OMAP_USB_HOST
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 51da21c..7b33b37 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -25,12 +25,10 @@
#include <linux/io.h>
#include <linux/usb/musb.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
-#include "am35xx.h"
-
+#include "omap_device.h"
+#include "soc.h"
#include "mux.h"
+#include "usb.h"
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 805bea6..a8795ff 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,10 +15,11 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/export.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/usb/musb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
new file mode 100644
index 0000000..9b986ea
--- /dev/null
+++ b/arch/arm/mach-omap2/usb.h
@@ -0,0 +1,82 @@
+#include <linux/platform_data/usb-omap.h>
+
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE (1 << 23)
+#define CONF2_OTGMODE (3 << 14)
+#define CONF2_NO_OVERRIDE (0 << 14)
+#define CONF2_FORCE_HOST (1 << 14)
+#define CONF2_FORCE_DEVICE (2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN (1 << 13)
+#define CONF2_VBDTCTEN (1 << 12)
+#define CONF2_REFFREQ_24MHZ (2 << 8)
+#define CONF2_REFFREQ_26MHZ (7 << 8)
+#define CONF2_REFFREQ_13MHZ (6 << 8)
+#define CONF2_REFFREQ (0xf << 8)
+#define CONF2_PHYCLKGD (1 << 7)
+#define CONF2_VBUSSENSE (1 << 6)
+#define CONF2_PHY_PLLON (1 << 5)
+#define CONF2_RESET (1 << 4)
+#define CONF2_PHYPWRDN (1 << 3)
+#define CONF2_OTGPWRDN (1 << 2)
+#define CONF2_DATPOL (1 << 1)
+
+/* TI81XX specific definitions */
+#define USBCTRL0 0x620
+#define USBSTAT0 0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_CHGDET_DIS (1 << 2)
+#define USBPHY_CHGDET_RSTRT (1 << 3)
+#define USBPHY_SRCONDM (1 << 4)
+#define USBPHY_SINKONDP (1 << 5)
+#define USBPHY_CHGISINK_EN (1 << 6)
+#define USBPHY_CHGVSRC_EN (1 << 7)
+#define USBPHY_DMPULLUP (1 << 8)
+#define USBPHY_DPPULLUP (1 << 9)
+#define USBPHY_CDET_EXTCTL (1 << 10)
+#define USBPHY_GPIO_MODE (1 << 12)
+#define USBPHY_DPOPBUFCTL (1 << 13)
+#define USBPHY_DMOPBUFCTL (1 << 14)
+#define USBPHY_DPINPUT (1 << 15)
+#define USBPHY_DMINPUT (1 << 16)
+#define USBPHY_DPGPIO_PD (1 << 17)
+#define USBPHY_DMGPIO_PD (1 << 18)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+#define USBPHY_DATA_POLARITY (1 << 23)
+
+struct usbhs_omap_board_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ /* have to be valid if phy_reset is true and portx is in phy mode */
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+ /* Set this to true for ES2.x silicon */
+ unsigned es2_compatibility:1;
+
+ unsigned phy_reset:1;
+
+ /*
+ * Regulators for USB PHYs.
+ * Each PHY can have a separate regulator.
+ */
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
+
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index b2f1c67..f6b6c37 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -11,7 +11,7 @@
#include <linux/io.h>
#include <linux/err.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "wd_timer.h"
#include "common.h"
diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h
index f6bbba7..a78f810 100644
--- a/arch/arm/mach-omap2/wd_timer.h
+++ b/arch/arm/mach-omap2/wd_timer.h
@@ -10,7 +10,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
#define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index dacaee0..8d88584 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,13 +3,12 @@
#
# Common support
-obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
+obj-y := sram.o dma.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
@@ -20,4 +19,3 @@
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
deleted file mode 100644
index 9d7ac20..0000000
--- a/arch/arm/plat-omap/clock.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2008 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-
-static struct clk_functions *arch_clock;
-
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (!arch_clock || !arch_clock->clk_enable)
- return -EINVAL;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- if (!arch_clock || !arch_clock->clk_disable)
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->usecount == 0) {
- pr_err("Trying disable clock %s with 0 usecount\n",
- clk->name);
- WARN_ON(1);
- goto out;
- }
-
- arch_clock->clk_disable(clk);
-
-out:
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags;
- unsigned long ret;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = clk->rate;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- long ret;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- if (!arch_clock || !arch_clock->clk_round_rate)
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_round_rate(clk, rate);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- if (!arch_clock || !arch_clock->clk_set_rate)
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_set_rate(clk, rate);
- if (ret == 0)
- propagate_rate(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
- return ret;
-
- if (!arch_clock || !arch_clock->clk_set_parent)
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->usecount == 0) {
- ret = arch_clock->clk_set_parent(clk, parent);
- if (ret == 0)
- propagate_rate(clk);
- } else
- ret = -EBUSY;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-/*
- * OMAP specific clock functions shared between omap1 and omap2
- */
-
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
- get_option(&str, &mpurate);
-
- if (!mpurate)
- return 1;
-
- if (mpurate < 1000)
- mpurate *= 1000000;
-
- return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
- return clk->parent->rate;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
-{
- WARN_ON(!clk->fixed_div);
-
- return clk->parent->rate / clk->fixed_div;
-}
-
-void clk_reparent(struct clk *child, struct clk *parent)
-{
- list_del_init(&child->sibling);
- if (parent)
- list_add(&child->sibling, &parent->children);
- child->parent = parent;
-
- /* now do the debugfs renaming to reattach the child
- to the proper parent */
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &tclk->children, sibling) {
- if (clkp->recalc)
- clkp->rate = clkp->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &root_clks, sibling) {
- if (clkp->recalc)
- clkp->rate = clkp->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run. No return value.
- */
-void clk_preinit(struct clk *clk)
-{
- INIT_LIST_HEAD(&clk->children);
-}
-
-int clk_register(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- /*
- * trap out already registered clocks
- */
- if (clk->node.next || clk->node.prev)
- return 0;
-
- mutex_lock(&clocks_mutex);
- if (clk->parent)
- list_add(&clk->sibling, &clk->parent->children);
- else
- list_add(&clk->sibling, &root_clks);
-
- list_add(&clk->node, &clocks);
- if (clk->init)
- clk->init(clk);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- list_del(&clk->sibling);
- list_del(&clk->node);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clocks, node) {
- if (clkp->flags & ENABLE_ON_INIT)
- clk_enable(clkp);
- }
-}
-
-int omap_clk_enable_autoidle_all(void)
-{
- struct clk *c;
- unsigned long flags;
-
- spin_lock_irqsave(&clockfw_lock, flags);
-
- list_for_each_entry(c, &clocks, node)
- if (c->ops->allow_idle)
- c->ops->allow_idle(c);
-
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-
-int omap_clk_disable_autoidle_all(void)
-{
- struct clk *c;
- unsigned long flags;
-
- spin_lock_irqsave(&clockfw_lock, flags);
-
- list_for_each_entry(c, &clocks, node)
- if (c->ops->deny_idle)
- c->ops->deny_idle(c);
-
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
- return 0;
-}
-
-static void clkll_disable_null(struct clk *clk)
-{
-}
-
-const struct clkops clkops_null = {
- .enable = clkll_enable_null,
- .disable = clkll_disable_null,
-};
-
-/*
- * Dummy clock
- *
- * Used for clock aliases that are needed on some OMAPs, but not others
- */
-struct clk dummy_ck = {
- .name = "dummy",
- .ops = &clkops_null,
-};
-
-/*
- *
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
- struct clk *ck;
- unsigned long flags;
-
- if (!arch_clock || !arch_clock->clk_disable_unused)
- return 0;
-
- pr_info("clock: disabling unused clocks to save power\n");
-
- spin_lock_irqsave(&clockfw_lock, flags);
- list_for_each_entry(ck, &clocks, node) {
- if (ck->ops == &clkops_null)
- continue;
-
- if (ck->usecount > 0 || !ck->enable_reg)
- continue;
-
- arch_clock->clk_disable_unused(ck);
- }
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-
-int __init clk_init(struct clk_functions * custom_clocks)
-{
- if (!custom_clocks) {
- pr_err("No custom clock functions registered\n");
- BUG();
- }
-
- arch_clock = custom_clocks;
-
- return 0;
-}
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static struct dentry *clk_debugfs_root;
-
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
-{
- struct clk *c;
- struct clk *pa;
-
- mutex_lock(&clocks_mutex);
- seq_printf(s, "%-30s %-30s %-10s %s\n",
- "clock-name", "parent-name", "rate", "use-count");
-
- list_for_each_entry(c, &clocks, node) {
- pa = c->parent;
- seq_printf(s, "%-30s %-30s %-10lu %d\n",
- c->name, pa ? pa->name : "none", c->rate, c->usecount);
- }
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
- return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-
-static const struct file_operations debug_clock_fops = {
- .open = clk_dbg_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->parent;
-
- d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dent = d;
-
- d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dent);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent;
-
- if (pa && !pa->dent) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dent) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clocks, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
-
- d = debugfs_create_file("summary", S_IRUGO,
- d, NULL, &debug_clock_fops);
- if (!d)
- return -ENOMEM;
-
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
deleted file mode 100644
index 111315a..0000000
--- a/arch/arm/plat-omap/common.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/common.c
- *
- * Code common to all OMAP machines.
- * The file is created by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/common.h>
-#include <plat/vram.h>
-#include <linux/platform_data/dsp-omap.h>
-#include <plat/dma.h>
-
-#include <plat/omap-secure.h>
-
-void __init omap_reserve(void)
-{
- omap_vram_reserve_sdram_memblock();
- omap_dsp_reserve_sdram_memblock();
- omap_secure_ram_reserve_memblock();
- omap_barrier_reserve_memblock();
-}
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
- init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-/*
- * Stub function for OMAP2 so that common files
- * continue to build when custom builds are used
- */
-int __weak omap_secure_ram_reserve_memblock(void)
-{
- return 0;
-}
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 87ba8dd..f3771cd 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,9 +22,6 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <plat/common.h>
-#include <plat/clock.h>
-
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
#define OMAP2_32KSYNCNT_REV_OFF 0x0
#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 5a4678e..a609e21 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -15,8 +15,7 @@
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <mach/hardware.h>
-#include "../mach-omap2/debug-devices.h"
+#include <plat/debug-devices.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index ea29bbe..c43ea21 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -17,16 +17,33 @@
#include <linux/platform_data/gpio-omap.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <plat/fpga.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
*/
+/* NOTE: most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+ /* offset 0x00 */
+ u16 smc91x[8];
+ /* offset 0x10 */
+ u16 fpga_rev;
+ u16 board_rev;
+ u16 gpio_outputs;
+ u16 leds;
+ /* offset 0x18 */
+ u16 misc_inputs;
+ u16 lan_status;
+ u16 lan_reset;
+ u16 reserved0;
+ /* offset 0x20 */
+ u16 ps2_data;
+ u16 ps2_ctrl;
+ /* plus also 4 rs232 ports ... */
+};
+
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 fpga_led_state;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c76ed8b..c288b76 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
/*
* MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -175,12 +173,13 @@
#define omap_writel(val, reg) do {} while (0)
#endif
+#ifdef CONFIG_ARCH_OMAP1
void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
switch (dst_port) {
case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
reg = OMAP_TC_OCPT1_PRIOR;
@@ -203,18 +202,22 @@
l |= (priority & 0xf) << 8;
omap_writel(l, reg);
}
-
- if (cpu_class_is_omap2()) {
- u32 ccr;
-
- ccr = p->dma_read(CCR, lch);
- if (priority)
- ccr |= (1 << 6);
- else
- ccr &= ~(1 << 6);
- p->dma_write(ccr, CCR, lch);
- }
}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+ u32 ccr;
+
+ ccr = p->dma_read(CCR, lch);
+ if (priority)
+ ccr |= (1 << 6);
+ else
+ ccr &= ~(1 << 6);
+ p->dma_write(ccr, CCR, lch);
+}
+#endif
EXPORT_SYMBOL(omap_set_dma_priority);
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
@@ -228,7 +231,7 @@
l |= data_type;
p->dma_write(l, CSDP, lch);
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 ccr;
ccr = p->dma_read(CCR, lch);
@@ -244,7 +247,7 @@
p->dma_write(ccr, CCR2, lch);
}
- if (cpu_class_is_omap2() && dma_trigger) {
+ if (dma_omap2plus() && dma_trigger) {
u32 val;
val = p->dma_read(CCR, lch);
@@ -284,7 +287,7 @@
{
BUG_ON(omap_dma_in_1510_mode());
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 w;
w = p->dma_read(CCR2, lch);
@@ -314,7 +317,7 @@
p->dma_write(w, LCH_CTRL, lch);
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
u32 val;
val = p->dma_read(CCR, lch);
@@ -342,7 +345,7 @@
void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
{
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
u32 csdp;
csdp = p->dma_read(CSDP, lch);
@@ -355,7 +358,7 @@
void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
- if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+ if (dma_omap1() && !dma_omap15xx()) {
u32 l;
l = p->dma_read(LCH_CTRL, lch);
@@ -373,7 +376,7 @@
{
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 w;
w = p->dma_read(CSDP, lch);
@@ -415,7 +418,7 @@
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
return;
p->dma_write(eidx, CSEI, lch);
@@ -447,13 +450,13 @@
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x2;
break;
}
@@ -463,7 +466,7 @@
* fall through
*/
case OMAP_DMA_DATA_BURST_16:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x3;
break;
}
@@ -487,7 +490,7 @@
{
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
l = p->dma_read(CSDP, lch);
l &= ~(0x1f << 9);
l |= dest_port << 9;
@@ -508,7 +511,7 @@
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
return;
p->dma_write(eidx, CDEI, lch);
@@ -540,19 +543,19 @@
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x2;
else
burst = 0x3;
break;
case OMAP_DMA_DATA_BURST_16:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x3;
break;
}
@@ -573,7 +576,7 @@
static inline void omap_enable_channel_irq(int lch)
{
/* Clear CSR */
- if (cpu_class_is_omap1())
+ if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@@ -587,7 +590,7 @@
/* disable channel interrupts */
p->dma_write(0, CICR, lch);
/* Clear CSR */
- if (cpu_class_is_omap1())
+ if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@@ -611,7 +614,7 @@
l = p->dma_read(CLNK_CTRL, lch);
- if (cpu_class_is_omap1())
+ if (dma_omap1())
l &= ~(1 << 14);
/* Set the ENABLE_LNK bits */
@@ -619,7 +622,7 @@
l = dma_chan[lch].next_lch | (1 << 15);
#ifndef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
if (dma_chan[lch].next_linked_ch != -1)
l = dma_chan[lch].next_linked_ch | (1 << 15);
#endif
@@ -636,12 +639,12 @@
/* Disable interrupts */
omap_disable_channel_irq(lch);
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
/* Clear the ENABLE_LNK bit */
l &= ~(1 << 15);
}
@@ -655,7 +658,7 @@
u32 val;
unsigned long flags;
- if (!cpu_class_is_omap2())
+ if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
@@ -673,7 +676,7 @@
u32 val;
unsigned long flags;
- if (!cpu_class_is_omap2())
+ if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
@@ -712,7 +715,7 @@
if (p->clear_lch_regs)
p->clear_lch_regs(free_ch);
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap_clear_dma(free_ch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
@@ -723,7 +726,7 @@
chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
chan->chain_id = -1;
chan->next_linked_ch = -1;
}
@@ -731,13 +734,13 @@
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (cpu_class_is_omap1())
+ if (dma_omap1())
chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
- else if (cpu_class_is_omap2())
+ else if (dma_omap2plus())
chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
OMAP2_DMA_TRANS_ERR_IRQ;
- if (cpu_is_omap16xx()) {
+ if (dma_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
if (dev_id != 0) {
set_gdma_dev(free_ch + 1, dev_id);
@@ -748,11 +751,11 @@
* id.
*/
p->dma_write(dev_id | (1 << 10), CCR, free_ch);
- } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
+ } else if (dma_omap1()) {
p->dma_write(dev_id, CCR, free_ch);
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
omap_enable_channel_irq(free_ch);
omap2_enable_irq_lch(free_ch);
}
@@ -774,7 +777,7 @@
}
/* Disable interrupt for logical channel */
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap2_disable_irq_lch(lch);
/* Disable all DMA interrupts for the channel. */
@@ -784,7 +787,7 @@
p->dma_write(0, CCR, lch);
/* Clear registers */
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap_clear_dma(lch);
spin_lock_irqsave(&dma_chan_lock, flags);
@@ -810,7 +813,7 @@
{
u32 reg;
- if (!cpu_class_is_omap2()) {
+ if (dma_omap1()) {
printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
return;
}
@@ -849,7 +852,7 @@
}
l = p->dma_read(CCR, lch);
l &= ~((1 << 6) | (1 << 26));
- if (cpu_class_is_omap2() && !cpu_is_omap242x())
+ if (d->dev_caps & IS_RW_PRIORITY)
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@@ -882,7 +885,7 @@
* The CPC/CDAC register needs to be initialized to zero
* before starting dma transfer.
*/
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
p->dma_write(0, CPC, lch);
else
p->dma_write(0, CDAC, lch);
@@ -1045,7 +1048,7 @@
{
dma_addr_t offset = 0;
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CSAC, lch);
@@ -1053,7 +1056,7 @@
if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
offset = p->dma_read(CSAC, lch);
- if (!cpu_is_omap15xx()) {
+ if (!dma_omap15xx()) {
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
* not been started (no data has been transferred so far).
@@ -1065,7 +1068,7 @@
offset = p->dma_read(CSSA, lch);
}
- if (cpu_class_is_omap1())
+ if (dma_omap1())
offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
return offset;
@@ -1084,7 +1087,7 @@
{
dma_addr_t offset = 0;
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CDAC, lch);
@@ -1093,7 +1096,7 @@
* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
- if (!cpu_is_omap15xx() && offset == 0) {
+ if (!dma_omap15xx() && offset == 0) {
offset = p->dma_read(CDAC, lch);
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
@@ -1104,7 +1107,7 @@
offset = p->dma_read(CDSA, lch);
}
- if (cpu_class_is_omap1())
+ if (dma_omap1())
offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
return offset;
@@ -1121,7 +1124,7 @@
{
int lch;
- if (cpu_class_is_omap1())
+ if (dma_omap1())
if (omap_lcd_dma_running())
return 1;
@@ -2024,7 +2027,7 @@
dma_chan = d->chan;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
dma_lch_count, GFP_KERNEL);
if (!dma_linked_lch) {
@@ -2036,7 +2039,7 @@
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap2_disable_irq_lch(ch);
dma_chan[ch].dev_id = -1;
@@ -2045,7 +2048,7 @@
if (ch >= 6 && enable_1510_mode)
continue;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
/*
* request_irq() doesn't like dev_id (ie. ch) being
* zero, so we have to kludge around this.
@@ -2070,11 +2073,11 @@
}
}
- if (cpu_class_is_omap2() && !cpu_is_omap242x())
+ if (d->dev_caps & IS_RW_PRIORITY)
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
if (dma_irq < 0) {
@@ -2089,9 +2092,8 @@
}
}
- /* reserve dma channels 0 and 1 in high security devices */
- if (cpu_is_omap34xx() &&
- (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+ /* reserve dma channels 0 and 1 in high security devices on 34xx */
+ if (d->dev_caps & HS_CHANNELS_RESERVED) {
pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
dma_chan[0].dev_id = 0;
dma_chan[1].dev_id = 1;
@@ -2118,7 +2120,7 @@
{
int dma_irq;
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
char irq_name[4];
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 938b50a..82231a7 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -42,9 +42,6 @@
#include <linux/pm_runtime.h>
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
-
-#include <mach/hardware.h>
static u32 omap_reserved_systimers;
static LIST_HEAD(omap_timer_list);
@@ -271,7 +268,7 @@
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
#if defined(CONFIG_ARCH_OMAP1)
-
+#include <mach/hardware.h>
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
* @inputmask: current value of idlect mask
@@ -348,7 +345,8 @@
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ if (timer->get_context_loss_count &&
+ timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -377,9 +375,11 @@
__omap_dm_timer_stop(timer, timer->posted, rate);
- if (!(timer->capability & OMAP_TIMER_ALWON))
- timer->ctx_loss_count =
- omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (timer->get_context_loss_count)
+ timer->ctx_loss_count =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ }
/*
* Since the register values are computed and written within
@@ -495,7 +495,8 @@
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ if (timer->get_context_loss_count &&
+ timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -729,6 +730,7 @@
timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
timer->pdev = pdev;
timer->capability = pdata->timer_capability;
+ timer->get_context_loss_count = pdata->get_context_loss_count;
/* Skip pm_runtime_enable for OMAP1 */
if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index bcbb9d5..3a77b30 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -30,9 +30,69 @@
#include <linux/io.h>
#include <linux/omapfb.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include <plat/cpu.h>
+
+#ifdef CONFIG_OMAP2_VRFB
+
+/*
+ * The first memory resource is the register region for VRFB,
+ * the rest are VRFB virtual memory areas for each VRFB context.
+ */
+
+static const struct resource omap2_vrfb_resources[] = {
+ DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
+ DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+ DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+ DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+ DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+};
+
+static const struct resource omap3_vrfb_resources[] = {
+ DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
+ DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+ DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+ DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+ DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+ DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"),
+ DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"),
+ DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"),
+ DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"),
+ DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"),
+ DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"),
+ DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"),
+ DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
+};
+
+static int __init omap_init_vrfb(void)
+{
+ struct platform_device *pdev;
+ const struct resource *res;
+ unsigned int num_res;
+
+ if (cpu_is_omap24xx()) {
+ res = omap2_vrfb_resources;
+ num_res = ARRAY_SIZE(omap2_vrfb_resources);
+ } else if (cpu_is_omap34xx()) {
+ res = omap3_vrfb_resources;
+ num_res = ARRAY_SIZE(omap3_vrfb_resources);
+ } else {
+ return 0;
+ }
+
+ pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
+ res, num_res, NULL, 0);
+
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ else
+ return 0;
+}
+
+arch_initcall(omap_init_vrfb);
+#endif
+
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 6013831..f9df624 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -31,176 +31,13 @@
#include <linux/err.h>
#include <linux/clk.h>
-#include <mach/irqs.h>
#include <plat/i2c.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
-#define OMAP_I2C_SIZE 0x3f
-#define OMAP1_I2C_BASE 0xfffb3800
-#define OMAP1_INT_I2C (32 + 4)
-
-static const char name[] = "omap_i2c";
-
-#define I2C_RESOURCE_BUILDER(base, irq) \
- { \
- .start = (base), \
- .end = (base) + OMAP_I2C_SIZE, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = (irq), \
- .flags = IORESOURCE_IRQ, \
- },
-
-static struct resource i2c_resources[][2] = {
- { I2C_RESOURCE_BUILDER(0, 0) },
-};
-
-#define I2C_DEV_BUILDER(bus_id, res, data) \
- { \
- .id = (bus_id), \
- .name = name, \
- .num_resources = ARRAY_SIZE(res), \
- .resource = (res), \
- .dev = { \
- .platform_data = (data), \
- }, \
- }
-
-#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
#define OMAP_I2C_MAX_CONTROLLERS 4
static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static struct platform_device omap_i2c_devices[] = {
- I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-};
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
-static int __init omap_i2c_nr_ports(void)
-{
- int ports = 0;
-
- if (cpu_class_is_omap1())
- ports = 1;
- else if (cpu_is_omap24xx())
- ports = 2;
- else if (cpu_is_omap34xx())
- ports = 3;
- else if (cpu_is_omap44xx())
- ports = 4;
-
- return ports;
-}
-
-static inline int omap1_i2c_add_bus(int bus_id)
-{
- struct platform_device *pdev;
- struct omap_i2c_bus_platform_data *pdata;
- struct resource *res;
-
- omap1_i2c_mux_pins(bus_id);
-
- pdev = &omap_i2c_devices[bus_id - 1];
- res = pdev->resource;
- res[0].start = OMAP1_I2C_BASE;
- res[0].end = res[0].start + OMAP_I2C_SIZE;
- res[1].start = OMAP1_INT_I2C;
- pdata = &i2c_pdata[bus_id - 1];
-
- /* all OMAP1 have IP version 1 register set */
- pdata->rev = OMAP_I2C_IP_VERSION_1;
-
- /* all OMAP1 I2C are implemented like this */
- pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
- OMAP_I2C_FLAG_SIMPLE_CLOCK |
- OMAP_I2C_FLAG_16BIT_DATA_REG |
- OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
-
- /* how the cpu bus is wired up differs for 7xx only */
-
- if (cpu_is_omap7xx())
- pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
- else
- pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
-
- return platform_device_register(pdev);
-}
-
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-/*
- * XXX This function is a temporary compatibility wrapper - only
- * needed until the I2C driver can be converted to call
- * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
- */
-static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
-{
- omap_pm_set_max_mpu_wakeup_lat(dev, t);
-}
-
-static inline int omap2_i2c_add_bus(int bus_id)
-{
- int l;
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
- struct omap_i2c_bus_platform_data *pdata;
- struct omap_i2c_dev_attr *dev_attr;
-
- omap2_i2c_mux_pins(bus_id);
-
- l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
- WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
- "String buffer overflow in I2C%d device setup\n", bus_id);
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return -EEXIST;
- }
-
- pdata = &i2c_pdata[bus_id - 1];
- /*
- * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
- * use, and functionality implementation flags, up to the OMAP I2C
- * driver via platform data
- */
- pdata->rev = oh->class->rev;
-
- dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
- pdata->flags = dev_attr->flags;
-
- /*
- * When waiting for completion of a i2c transfer, we need to
- * set a wake up latency constraint for the MPU. This is to
- * ensure quick enough wakeup from idle, when transfer
- * completes.
- * Only omap3 has support for constraints
- */
- if (cpu_is_omap34xx())
- pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
- pdev = omap_device_build(name, bus_id, oh, pdata,
- sizeof(struct omap_i2c_bus_platform_data),
- NULL, 0, 0);
- WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-
- return PTR_RET(pdev);
-}
-#else
-static inline int omap2_i2c_add_bus(int bus_id)
-{
- return 0;
-}
-#endif
-
-static int __init omap_i2c_add_bus(int bus_id)
-{
- if (cpu_class_is_omap1())
- return omap1_i2c_add_bus(bus_id);
- else
- return omap2_i2c_add_bus(bus_id);
-}
-
/**
* omap_i2c_bus_setup - Process command line options for the I2C bus speed
* @str: String of options
@@ -214,12 +51,11 @@
*/
static int __init omap_i2c_bus_setup(char *str)
{
- int ports;
int ints[3];
- ports = omap_i2c_nr_ports();
get_options(str, 3, ints);
- if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+ if (ints[0] < 2 || ints[1] < 1 ||
+ ints[1] > OMAP_I2C_MAX_CONTROLLERS)
return 0;
i2c_pdata[ints[1] - 1].clkrate = ints[2];
i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
@@ -239,7 +75,7 @@
for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
- err = omap_i2c_add_bus(i + 1);
+ err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
if (err)
goto out;
}
@@ -264,7 +100,7 @@
{
int err;
- BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+ BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
if (info) {
err = i2c_register_board_info(bus_id, info, len);
@@ -277,5 +113,5 @@
i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
- return omap_i2c_add_bus(bus_id);
+ return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
}
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
similarity index 60%
rename from arch/arm/plat-omap/include/plat/dma.h
rename to arch/arm/plat-omap/include/plat-omap/dma-omap.h
index 0a87b05..6f506ba 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/dma.h
+ * OMAP DMA handling defines and function
*
* Copyright (C) 2003 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
@@ -23,187 +23,8 @@
#include <linux/platform_device.h>
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
-
#define INT_DMA_LCD 25
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE 0
-#define OMAP_DMA_MCSI1_TX 1
-#define OMAP_DMA_MCSI1_RX 2
-#define OMAP_DMA_I2C_RX 3
-#define OMAP_DMA_I2C_TX 4
-#define OMAP_DMA_EXT_NDMA_REQ 5
-#define OMAP_DMA_EXT_NDMA_REQ2 6
-#define OMAP_DMA_UWIRE_TX 7
-#define OMAP_DMA_MCBSP1_TX 8
-#define OMAP_DMA_MCBSP1_RX 9
-#define OMAP_DMA_MCBSP3_TX 10
-#define OMAP_DMA_MCBSP3_RX 11
-#define OMAP_DMA_UART1_TX 12
-#define OMAP_DMA_UART1_RX 13
-#define OMAP_DMA_UART2_TX 14
-#define OMAP_DMA_UART2_RX 15
-#define OMAP_DMA_MCBSP2_TX 16
-#define OMAP_DMA_MCBSP2_RX 17
-#define OMAP_DMA_UART3_TX 18
-#define OMAP_DMA_UART3_RX 19
-#define OMAP_DMA_CAMERA_IF_RX 20
-#define OMAP_DMA_MMC_TX 21
-#define OMAP_DMA_MMC_RX 22
-#define OMAP_DMA_NAND 23
-#define OMAP_DMA_IRQ_LCD_LINE 24
-#define OMAP_DMA_MEMORY_STICK 25
-#define OMAP_DMA_USB_W2FC_RX0 26
-#define OMAP_DMA_USB_W2FC_RX1 27
-#define OMAP_DMA_USB_W2FC_RX2 28
-#define OMAP_DMA_USB_W2FC_TX0 29
-#define OMAP_DMA_USB_W2FC_TX1 30
-#define OMAP_DMA_USB_W2FC_TX2 31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN 32
-#define OMAP_DMA_SPI_TX 33
-#define OMAP_DMA_SPI_RX 34
-#define OMAP_DMA_CRYPTO_HASH 35
-#define OMAP_DMA_CCP_ATTN 36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
-#define OMAP_DMA_MMC2_TX 54
-#define OMAP_DMA_MMC2_RX 55
-#define OMAP_DMA_CRYPTO_DES_OUT 56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE 0
-#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
-#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
-#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
-#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
-
-#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
-#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
-
-/* Only for AM35xx */
-#define AM35XX_DMA_UART4_TX 54
-#define AM35XX_DMA_UART4_RX 55
-
-/*----------------------------------------------------------------------------*/
-
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
#define OMAP_DMA_HALF_IRQ (1 << 2)
@@ -309,10 +130,12 @@
#define SRC_PORT BIT(0x7)
#define DST_PORT BIT(0x8)
#define SRC_INDEX BIT(0x9)
-#define DST_INDEX BIT(0xA)
-#define IS_BURST_ONLY4 BIT(0xB)
-#define CLEAR_CSR_ON_READ BIT(0xC)
-#define IS_WORD_16 BIT(0xD)
+#define DST_INDEX BIT(0xa)
+#define IS_BURST_ONLY4 BIT(0xb)
+#define CLEAR_CSR_ON_READ BIT(0xc)
+#define IS_WORD_16 BIT(0xd)
+#define ENABLE_16XX_MODE BIT(0xe)
+#define HS_CHANNELS_RESERVED BIT(0xf)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
@@ -449,7 +272,15 @@
u32 (*dma_read)(int reg, int lch);
};
-extern void __init omap_init_consistent_dma_size(void);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define dma_omap2plus() 1
+#else
+#define dma_omap2plus() 0
+#endif
+#define dma_omap1() (!dma_omap2plus())
+#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE)))
+#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE)))
+
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
deleted file mode 100644
index 025d85a..0000000
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * clkdev <-> OMAP integration
- *
- * Russell King <linux@arm.linux.org.uk>
- *
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-
-#include <linux/clkdev.h>
-
-struct omap_clk {
- u16 cpu;
- struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) \
- { \
- .cpu = cp, \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_310 (1 << 0)
-#define CK_7XX (1 << 1) /* 7xx, 850 */
-#define CK_1510 (1 << 2)
-#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
-#define CK_242X (1 << 4)
-#define CK_243X (1 << 5) /* 243x, 253x */
-#define CK_3430ES1 (1 << 6) /* 34xxES1 only */
-#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX (1 << 9) /* Sitara AM35xx */
-#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
-#define CK_443X (1 << 11)
-#define CK_TI816X (1 << 12)
-#define CK_446X (1 << 13)
-#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */
-#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
-
-
-#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
-
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
deleted file mode 100644
index e2e2d04..0000000
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-#include <linux/list.h>
-
-struct module;
-struct clk;
-struct clockdomain;
-
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk) (clk->name)
-#define __clk_get_parent(clk) (clk->parent)
-#define __clk_get_rate(clk) (clk->rate)
-
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware. Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
- void (*find_idlest)(struct clk *, void __iomem **,
- u8 *, u8 *);
- void (*find_companion)(struct clk *, void __iomem **,
- u8 *);
- void (*allow_idle)(struct clk *);
- void (*deny_idle)(struct clk *);
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X (1 << 0)
-#define RATE_IN_243X (1 << 1)
-#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX (1 << 4)
-#define RATE_IN_4430 (1 << 5)
-#define RATE_IN_TI816X (1 << 6)
-#define RATE_IN_4460 (1 << 7)
-#define RATE_IN_AM33XX (1 << 8)
-#define RATE_IN_TI814X (1 << 9)
-
-#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
-
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
- void __iomem *mult_div1_reg;
- u32 mult_mask;
- u32 div1_mask;
- struct clk *clk_bypass;
- struct clk *clk_ref;
- void __iomem *control_reg;
- u32 enable_mask;
- unsigned long last_rounded_rate;
- u16 last_rounded_m;
- u16 max_multiplier;
- u8 last_rounded_n;
- u8 min_divider;
- u16 max_divider;
- u8 modes;
- void __iomem *autoidle_reg;
- void __iomem *idlest_reg;
- u32 autoidle_mask;
- u32 freqsel_mask;
- u32 idlest_mask;
- u32 dco_mask;
- u32 sddiv_mask;
- u8 auto_recal_bit;
- u8 recal_en_bit;
- u8 recal_st_bit;
- u8 flags;
-};
-
-#endif
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- * bits share the same register. This flag allows the
- * omap4_dpllmx*() code to determine which GATE_CTRL bit field
- * should be used. This is a temporary solution - a better approach
- * would be to associate clock type-specific data with the clock,
- * similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL (1 << 1)
-#define CLOCK_NO_IDLE_PARENT (1 << 2)
-#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
-#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2 (1 << 5)
-
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named. It should be "enable_count" or
- * something similar. "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals. (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
- struct list_head node;
- const struct clkops *ops;
- const char *name;
- struct clk *parent;
- struct list_head children;
- struct list_head sibling; /* node for children */
- unsigned long rate;
- void __iomem *enable_reg;
- unsigned long (*recalc)(struct clk *);
- int (*set_rate)(struct clk *, unsigned long);
- long (*round_rate)(struct clk *, unsigned long);
- void (*init)(struct clk *);
- u8 enable_bit;
- s8 usecount;
- u8 fixed_div;
- u8 flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- void __iomem *clksel_reg;
- u32 clksel_mask;
- const struct clksel *clksel;
- struct dpll_data *dpll_data;
- const char *clkdm_name;
- struct clockdomain *clkdm;
-#else
- u8 rate_offset;
- u8 src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
- int (*clk_enable)(struct clk *clk);
- void (*clk_disable)(struct clk *clk);
- long (*clk_round_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_parent)(struct clk *clk, struct clk *parent);
- void (*clk_allow_idle)(struct clk *clk);
- void (*clk_deny_idle)(struct clk *clk);
- void (*clk_disable_unused)(struct clk *clk);
-};
-
-extern int mpurate;
-
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
deleted file mode 100644
index d1cb6f5..0000000
--- a/arch/arm/plat-omap/include/plat/common.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <plat/i2c.h>
-#include <plat/omap_hwmod.h>
-
-extern int __init omap_init_clocksource_32k(void __iomem *vbase);
-
-extern void __init omap_check_revision(void);
-
-extern void omap_reserve(void);
-extern int omap_dss_reset(struct omap_hwmod *);
-
-void omap_sram_init(void);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h
new file mode 100644
index 0000000..da000d4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/counter-32k.h
@@ -0,0 +1 @@
+int omap_init_clocksource_32k(void __iomem *vbase);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67da857..b4516ab 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
* OMAP cpu type detection
*
* Copyright (C) 2004, 2008 Nokia Corporation
@@ -30,470 +28,12 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-#include <plat/multi.h>
-
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST 0
-#define OMAP2_DEVICE_TYPE_EMU 1
-#define OMAP2_DEVICE_TYPE_SEC 2
-#define OMAP2_DEVICE_TYPE_GP 3
-#define OMAP2_DEVICE_TYPE_BAD 4
-
-int omap_type(void);
-
-/*
- * omap_rev bits:
- * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
- * CPU revision (See _REV_ defined in cpu.h) [15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx(): True for OMAP730, OMAP850
- * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x(): True for OMAP2430
- * cpu_is_omap343x(): True for OMAP3430
- * cpu_is_omap443x(): True for OMAP4430
- * cpu_is_omap446x(): True for OMAP4460
- * cpu_is_omap447x(): True for OMAP4470
- * soc_is_omap543x(): True for OMAP5430, OMAP5432
- */
-#define GET_OMAP_CLASS (omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id) \
-static inline int is_omap ##class (void) \
-{ \
- return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
-
-#define IS_AM_CLASS(class, id) \
-static inline int is_am ##class (void) \
-{ \
- return (GET_AM_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
-
-#define IS_TI_CLASS(class, id) \
-static inline int is_ti ##class (void) \
-{ \
- return (GET_TI_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id) \
-static inline int is_omap ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-#define IS_TI_SUBCLASS(subclass, id) \
-static inline int is_ti ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-#define IS_AM_SUBCLASS(subclass, id) \
-static inline int is_am ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
-IS_AM_CLASS(33xx, 0x33)
-
-IS_TI_CLASS(81xx, 0x81)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
-
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-
-#define cpu_is_omap7xx() 0
-#define cpu_is_omap15xx() 0
-#define cpu_is_omap16xx() 0
-#define cpu_is_omap24xx() 0
-#define cpu_is_omap242x() 0
-#define cpu_is_omap243x() 0
-#define cpu_is_omap34xx() 0
-#define cpu_is_omap343x() 0
-#define cpu_is_ti81xx() 0
-#define cpu_is_ti816x() 0
-#define cpu_is_ti814x() 0
-#define soc_is_am35xx() 0
-#define soc_is_am33xx() 0
-#define soc_is_am335x() 0
-#define cpu_is_omap44xx() 0
-#define cpu_is_omap443x() 0
-#define cpu_is_omap446x() 0
-#define cpu_is_omap447x() 0
-#define soc_is_omap54xx() 0
-#define soc_is_omap543x() 0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() 1
-# endif
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
#endif
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# undef cpu_is_omap343x
-# define cpu_is_omap34xx() is_omap34xx()
-# define cpu_is_omap343x() is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() 1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() 1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# define cpu_is_omap34xx() 1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-# undef cpu_is_omap343x
-# define cpu_is_omap343x() 1
-# endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#include "../../mach-omap2/soc.h"
#endif
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310(): True for OMAP310
- * cpu_is_omap1510(): True for OMAP1510
- * cpu_is_omap1610(): True for OMAP1610
- * cpu_is_omap1611(): True for OMAP1611
- * cpu_is_omap5912(): True for OMAP5912
- * cpu_is_omap1621(): True for OMAP1621
- * cpu_is_omap1710(): True for OMAP1710
- * cpu_is_omap2420(): True for OMAP2420
- * cpu_is_omap2422(): True for OMAP2422
- * cpu_is_omap2423(): True for OMAP2423
- * cpu_is_omap2430(): True for OMAP2430
- * cpu_is_omap3430(): True for OMAP3430
- */
-#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id) \
-static inline int is_omap ##type (void) \
-{ \
- return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310() 0
-#define cpu_is_omap1510() 0
-#define cpu_is_omap1610() 0
-#define cpu_is_omap5912() 0
-#define cpu_is_omap1611() 0
-#define cpu_is_omap1621() 0
-#define cpu_is_omap1710() 0
-#define cpu_is_omap2420() 0
-#define cpu_is_omap2422() 0
-#define cpu_is_omap2423() 0
-#define cpu_is_omap2430() 0
-#define cpu_is_omap3430() 0
-#define cpu_is_omap3630() 0
-#define soc_is_omap5430() 0
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap310
-# undef cpu_is_omap1510
-# define cpu_is_omap310() is_omap310()
-# define cpu_is_omap1510() is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap1610
-# undef cpu_is_omap1611
-# undef cpu_is_omap5912
-# undef cpu_is_omap1621
-# undef cpu_is_omap1710
-# define cpu_is_omap1610() is_omap1610()
-# define cpu_is_omap1611() is_omap1611()
-# define cpu_is_omap5912() is_omap5912()
-# define cpu_is_omap1621() is_omap1621()
-# define cpu_is_omap1710() is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap2420
-# undef cpu_is_omap2422
-# undef cpu_is_omap2423
-# undef cpu_is_omap2430
-# define cpu_is_omap2420() is_omap2420()
-# define cpu_is_omap2422() is_omap2422()
-# define cpu_is_omap2423() is_omap2423()
-# define cpu_is_omap2430() is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef soc_is_am35xx
-# define cpu_is_omap3430() is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630() is_omap363x()
-# define cpu_is_ti81xx() is_ti81xx()
-# define cpu_is_ti816x() is_ti816x()
-# define cpu_is_ti814x() is_ti814x()
-# define soc_is_am35xx() is_am35xx()
-#endif
-
-# if defined(CONFIG_SOC_AM33XX)
-# undef soc_is_am33xx
-# undef soc_is_am335x
-# define soc_is_am33xx() is_am33xx()
-# define soc_is_am335x() is_am335x()
-#endif
-
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx() is_omap44xx()
-# define cpu_is_omap443x() is_omap443x()
-# define cpu_is_omap446x() is_omap446x()
-# define cpu_is_omap447x() is_omap447x()
-# endif
-
-# if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx() is_omap54xx()
-# define soc_is_omap543x() is_omap543x()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
- cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
- cpu_is_omap44xx() || soc_is_omap54xx() || \
- soc_is_am33xx())
-
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS 0x24200024
-#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
-
-#define OMAP243X_CLASS 0x24300024
-#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
-
-#define OMAP343X_CLASS 0x34300034
-#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
-
-#define OMAP363X_CLASS 0x36300034
-#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-
-#define TI816X_CLASS 0x81600034
-#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
-
-#define TI814X_CLASS 0x81400034
-#define TI8148_REV_ES1_0 TI814X_CLASS
-#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
-
-#define AM35XX_CLASS 0x35170034
-#define AM35XX_REV_ES1_0 AM35XX_CLASS
-#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
-
-#define AM335X_CLASS 0x33500033
-#define AM335X_REV_ES1_0 AM335X_CLASS
-
-#define OMAP443X_CLASS 0x44300044
-#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
-
-#define OMAP446X_CLASS 0x44600044
-#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8))
-
-#define OMAP447X_CLASS 0x44700044
-#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
-
-#define OMAP54XX_CLASS 0x54000054
-#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- * family have OS-level control over the I/O chain clock. This is
- * to avoid a window during which wakeups could potentially be lost
- * during powerdomain transitions. If this bit is set, it
- * indicates that the chip does support OS-level control of this
- * feature.
- */
-extern u32 omap_features;
-
-#define OMAP3_HAS_L2CACHE BIT(0)
-#define OMAP3_HAS_IVA BIT(1)
-#define OMAP3_HAS_SGX BIT(2)
-#define OMAP3_HAS_NEON BIT(3)
-#define OMAP3_HAS_ISP BIT(4)
-#define OMAP3_HAS_192MHZ_CLK BIT(5)
-#define OMAP3_HAS_IO_WAKEUP BIT(6)
-#define OMAP3_HAS_SDRC BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
-#define OMAP4_HAS_MPU_1GHZ BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ BIT(11)
-
-
-#define OMAP3_HAS_FEATURE(feat,flag) \
-static inline unsigned int omap3_has_ ##feat(void) \
-{ \
- return omap_features & OMAP3_HAS_ ##flag; \
-} \
-
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag) \
-static inline unsigned int omap4_has_ ##feat(void) \
-{ \
- return omap_features & OMAP4_HAS_ ##flag; \
-} \
-
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-
-#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h
new file mode 100644
index 0000000..8fc4287
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/debug-devices.h
@@ -0,0 +1,2 @@
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
deleted file mode 100644
index 1f767cb..0000000
--- a/arch/arm/plat-omap/include/plat/dma-44xx.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * OMAP4 SDMA channel definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-
-#define OMAP44XX_DMA_SYS_REQ0 2
-#define OMAP44XX_DMA_SYS_REQ1 3
-#define OMAP44XX_DMA_GPMC 4
-#define OMAP44XX_DMA_DSS_DISPC_REQ 6
-#define OMAP44XX_DMA_SYS_REQ2 7
-#define OMAP44XX_DMA_MCASP1_AXEVT 8
-#define OMAP44XX_DMA_ISS_REQ1 9
-#define OMAP44XX_DMA_ISS_REQ2 10
-#define OMAP44XX_DMA_MCASP1_AREVT 11
-#define OMAP44XX_DMA_ISS_REQ3 12
-#define OMAP44XX_DMA_ISS_REQ4 13
-#define OMAP44XX_DMA_DSS_RFBI_REQ 14
-#define OMAP44XX_DMA_SPI3_TX0 15
-#define OMAP44XX_DMA_SPI3_RX0 16
-#define OMAP44XX_DMA_MCBSP2_TX 17
-#define OMAP44XX_DMA_MCBSP2_RX 18
-#define OMAP44XX_DMA_MCBSP3_TX 19
-#define OMAP44XX_DMA_MCBSP3_RX 20
-#define OMAP44XX_DMA_C2C_SSCM_GPO0 21
-#define OMAP44XX_DMA_C2C_SSCM_GPO1 22
-#define OMAP44XX_DMA_SPI3_TX1 23
-#define OMAP44XX_DMA_SPI3_RX1 24
-#define OMAP44XX_DMA_I2C3_TX 25
-#define OMAP44XX_DMA_I2C3_RX 26
-#define OMAP44XX_DMA_I2C1_TX 27
-#define OMAP44XX_DMA_I2C1_RX 28
-#define OMAP44XX_DMA_I2C2_TX 29
-#define OMAP44XX_DMA_I2C2_RX 30
-#define OMAP44XX_DMA_MCBSP4_TX 31
-#define OMAP44XX_DMA_MCBSP4_RX 32
-#define OMAP44XX_DMA_MCBSP1_TX 33
-#define OMAP44XX_DMA_MCBSP1_RX 34
-#define OMAP44XX_DMA_SPI1_TX0 35
-#define OMAP44XX_DMA_SPI1_RX0 36
-#define OMAP44XX_DMA_SPI1_TX1 37
-#define OMAP44XX_DMA_SPI1_RX1 38
-#define OMAP44XX_DMA_SPI1_TX2 39
-#define OMAP44XX_DMA_SPI1_RX2 40
-#define OMAP44XX_DMA_SPI1_TX3 41
-#define OMAP44XX_DMA_SPI1_RX3 42
-#define OMAP44XX_DMA_SPI2_TX0 43
-#define OMAP44XX_DMA_SPI2_RX0 44
-#define OMAP44XX_DMA_SPI2_TX1 45
-#define OMAP44XX_DMA_SPI2_RX1 46
-#define OMAP44XX_DMA_MMC2_TX 47
-#define OMAP44XX_DMA_MMC2_RX 48
-#define OMAP44XX_DMA_UART1_TX 49
-#define OMAP44XX_DMA_UART1_RX 50
-#define OMAP44XX_DMA_UART2_TX 51
-#define OMAP44XX_DMA_UART2_RX 52
-#define OMAP44XX_DMA_UART3_TX 53
-#define OMAP44XX_DMA_UART3_RX 54
-#define OMAP44XX_DMA_UART4_TX 55
-#define OMAP44XX_DMA_UART4_RX 56
-#define OMAP44XX_DMA_MMC4_TX 57
-#define OMAP44XX_DMA_MMC4_RX 58
-#define OMAP44XX_DMA_MMC5_TX 59
-#define OMAP44XX_DMA_MMC5_RX 60
-#define OMAP44XX_DMA_MMC1_TX 61
-#define OMAP44XX_DMA_MMC1_RX 62
-#define OMAP44XX_DMA_SYS_REQ3 64
-#define OMAP44XX_DMA_MCPDM_UP 65
-#define OMAP44XX_DMA_MCPDM_DL 66
-#define OMAP44XX_DMA_DMIC_REQ 67
-#define OMAP44XX_DMA_C2C_SSCM_GPO2 68
-#define OMAP44XX_DMA_C2C_SSCM_GPO3 69
-#define OMAP44XX_DMA_SPI4_TX0 70
-#define OMAP44XX_DMA_SPI4_RX0 71
-#define OMAP44XX_DMA_DSS_DSI1_REQ0 72
-#define OMAP44XX_DMA_DSS_DSI1_REQ1 73
-#define OMAP44XX_DMA_DSS_DSI1_REQ2 74
-#define OMAP44XX_DMA_DSS_DSI1_REQ3 75
-#define OMAP44XX_DMA_DSS_HDMI_REQ 76
-#define OMAP44XX_DMA_MMC3_TX 77
-#define OMAP44XX_DMA_MMC3_RX 78
-#define OMAP44XX_DMA_USIM_TX 79
-#define OMAP44XX_DMA_USIM_RX 80
-#define OMAP44XX_DMA_DSS_DSI2_REQ0 81
-#define OMAP44XX_DMA_DSS_DSI2_REQ1 82
-#define OMAP44XX_DMA_DSS_DSI2_REQ2 83
-#define OMAP44XX_DMA_DSS_DSI2_REQ3 84
-#define OMAP44XX_DMA_SLIMBUS1_TX0 85
-#define OMAP44XX_DMA_SLIMBUS1_TX1 86
-#define OMAP44XX_DMA_SLIMBUS1_TX2 87
-#define OMAP44XX_DMA_SLIMBUS1_TX3 88
-#define OMAP44XX_DMA_SLIMBUS1_RX0 89
-#define OMAP44XX_DMA_SLIMBUS1_RX1 90
-#define OMAP44XX_DMA_SLIMBUS1_RX2 91
-#define OMAP44XX_DMA_SLIMBUS1_RX3 92
-#define OMAP44XX_DMA_SLIMBUS2_TX0 93
-#define OMAP44XX_DMA_SLIMBUS2_TX1 94
-#define OMAP44XX_DMA_SLIMBUS2_TX2 95
-#define OMAP44XX_DMA_SLIMBUS2_TX3 96
-#define OMAP44XX_DMA_SLIMBUS2_RX0 97
-#define OMAP44XX_DMA_SLIMBUS2_RX1 98
-#define OMAP44XX_DMA_SLIMBUS2_RX2 99
-#define OMAP44XX_DMA_SLIMBUS2_RX3 100
-#define OMAP44XX_DMA_ABE_REQ_0 101
-#define OMAP44XX_DMA_ABE_REQ_1 102
-#define OMAP44XX_DMA_ABE_REQ_2 103
-#define OMAP44XX_DMA_ABE_REQ_3 104
-#define OMAP44XX_DMA_ABE_REQ_4 105
-#define OMAP44XX_DMA_ABE_REQ_5 106
-#define OMAP44XX_DMA_ABE_REQ_6 107
-#define OMAP44XX_DMA_ABE_REQ_7 108
-#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109
-#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110
-#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111
-#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112
-#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113
-#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114
-#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115
-#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116
-#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117
-#define OMAP44XX_DMA_SHA2_CTXIN_P 118
-#define OMAP44XX_DMA_SHA2_DIN_P 119
-#define OMAP44XX_DMA_SHA2_CTXOUT_P 120
-#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121
-#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122
-#define OMAP44XX_DMA_I2C4_TX 124
-#define OMAP44XX_DMA_I2C4_RX 125
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 85868e9..3f5b9cf 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -94,6 +94,7 @@
/* set_timer_src - Only used for OMAP1 devices */
int (*set_timer_src)(struct platform_device *pdev, int source);
u32 timer_capability;
+ int (*get_context_loss_count)(struct device *);
};
int omap_dm_timer_reserve_systimer(int id);
@@ -263,6 +264,7 @@
unsigned reserved:1;
unsigned posted:1;
struct timer_regs context;
+ int (*get_context_loss_count)(struct device *);
int ctx_loss_count;
int revision;
u32 capability;
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
deleted file mode 100644
index bd3c632..0000000
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-extern void omap1510_fpga_init_irq(void);
-
-#define fpga_read(reg) __raw_readb(reg)
-#define fpga_write(val, reg) __raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- * H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
-#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
-#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
-
-/* NOTE: most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
- /* offset 0x00 */
- u16 smc91x[8];
- /* offset 0x10 */
- u16 fpga_rev;
- u16 board_rev;
- u16 gpio_outputs;
- u16 leds;
- /* offset 0x18 */
- u16 misc_inputs;
- u16 lan_status;
- u16 lan_reset;
- u16 reserved0;
- /* offset 0x20 */
- u16 ps2_data;
- u16 ps2_ctrl;
- /* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
-#define H2P2_DBG_FPGA_LED_RED (1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
-/* cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- * OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
-#define OMAP1510_FPGA_SIZE SZ_4K
-#define OMAP1510_FPGA_START 0x08000000 /* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE 0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
-#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
-#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
-#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd (1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 7c22b9e..7a9028c 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -18,11 +18,15 @@
* 02110-1301 USA
*
*/
-#ifndef __ASM__ARCH_OMAP_I2C_H
-#define __ASM__ARCH_OMAP_I2C_H
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
+#ifndef __PLAT_OMAP_I2C_H
+#define __PLAT_OMAP_I2C_H
+
+struct i2c_board_info;
+struct omap_i2c_bus_platform_data;
+
+int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+ int bus_id);
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -37,23 +41,7 @@
}
#endif
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
- u8 fifo_depth;
- u32 flags;
-};
-
-void __init omap1_i2c_mux_pins(int bus_id);
-void __init omap2_i2c_mux_pins(int bus_id);
-
struct omap_hwmod;
int omap_i2c_reset(struct omap_hwmod *oh);
-#endif /* __ASM__ARCH_OMAP_I2C_H */
+#endif /* __PLAT_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
deleted file mode 100644
index d4116b59..0000000
--- a/arch/arm/plat-omap/include/plat/iommu2.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * omap iommu: omap2 architecture specific definitions
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IOMMU2_H
-#define __MACH_IOMMU2_H
-
-#include <linux/io.h>
-
-/*
- * MMU Register offsets
- */
-#define MMU_REVISION 0x00
-#define MMU_SYSCONFIG 0x10
-#define MMU_SYSSTATUS 0x14
-#define MMU_IRQSTATUS 0x18
-#define MMU_IRQENABLE 0x1c
-#define MMU_WALKING_ST 0x40
-#define MMU_CNTL 0x44
-#define MMU_FAULT_AD 0x48
-#define MMU_TTB 0x4c
-#define MMU_LOCK 0x50
-#define MMU_LD_TLB 0x54
-#define MMU_CAM 0x58
-#define MMU_RAM 0x5c
-#define MMU_GFLUSH 0x60
-#define MMU_FLUSH_ENTRY 0x64
-#define MMU_READ_CAM 0x68
-#define MMU_READ_RAM 0x6c
-#define MMU_EMU_FAULT_AD 0x70
-
-#define MMU_REG_SIZE 256
-
-/*
- * MMU Register bit definitions
- */
-#define MMU_LOCK_BASE_SHIFT 10
-#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
-#define MMU_LOCK_BASE(x) \
- ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
-
-#define MMU_LOCK_VICT_SHIFT 4
-#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
-#define MMU_LOCK_VICT(x) \
- ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
-
-#define MMU_CAM_VATAG_SHIFT 12
-#define MMU_CAM_VATAG_MASK \
- ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
-#define MMU_CAM_P (1 << 3)
-#define MMU_CAM_V (1 << 2)
-#define MMU_CAM_PGSZ_MASK 3
-#define MMU_CAM_PGSZ_1M (0 << 0)
-#define MMU_CAM_PGSZ_64K (1 << 0)
-#define MMU_CAM_PGSZ_4K (2 << 0)
-#define MMU_CAM_PGSZ_16M (3 << 0)
-
-#define MMU_RAM_PADDR_SHIFT 12
-#define MMU_RAM_PADDR_MASK \
- ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
-#define MMU_RAM_ENDIAN_SHIFT 9
-#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ELSZ_SHIFT 7
-#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_MIXED_SHIFT 6
-#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
-#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
-
-/*
- * register accessors
- */
-static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
-{
- return __raw_readl(obj->regbase + offs);
-}
-
-static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
-{
- __raw_writel(val, obj->regbase + offs);
-}
-
-#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
deleted file mode 100644
index 498e57c..0000000
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * omap iommu: simple virtual address space management
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOMMU_MMAP_H
-#define __IOMMU_MMAP_H
-
-#include <linux/iommu.h>
-
-struct iovm_struct {
- struct omap_iommu *iommu; /* iommu object which this belongs to */
- u32 da_start; /* area definition */
- u32 da_end;
- u32 flags; /* IOVMF_: see below */
- struct list_head list; /* linked in ascending order */
- const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */
- void *va; /* mpu side mapped address */
-};
-
-/*
- * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
- *
- * lower 16 bit is used for h/w and upper 16 bit is for s/w.
- */
-#define IOVMF_SW_SHIFT 16
-
-/*
- * iovma: h/w flags derived from cam and ram attribute
- */
-#define IOVMF_CAM_MASK (~((1 << 10) - 1))
-#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
-
-#define IOVMF_PGSZ_MASK (3 << 0)
-#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
-#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
-#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
-#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
-
-#define IOVMF_ENDIAN_MASK (1 << 9)
-#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
-#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE
-
-#define IOVMF_ELSZ_MASK (3 << 7)
-#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8
-#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
-#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
-#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
-
-#define IOVMF_MIXED_MASK (1 << 6)
-#define IOVMF_MIXED MMU_RAM_MIXED
-
-/*
- * iovma: s/w flags, used for mapping and umapping internally.
- */
-#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
-#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
-#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
-
-/* "superpages" is supported just with physically linear pages */
-#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
-#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
-#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
-
-#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
-
-
-extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
-extern u32
-omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da,
- const struct sg_table *sgt, u32 flags);
-extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
- struct device *dev, u32 da);
-extern u32
-omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev,
- u32 da, size_t bytes, u32 flags);
-extern void
-omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
- const u32 da);
-extern void *omap_da_to_va(struct device *dev, u32 da);
-
-#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
deleted file mode 100644
index 324d31b..0000000
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for compiling in multiple OMAP processors
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __PLAT_OMAP_MULTI_H
-#define __PLAT_OMAP_MULTI_H
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-# error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap4
-# endif
-#endif
-
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap5
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME am33xx
-# endif
-#endif
-
-#endif /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
deleted file mode 100644
index 0e4acd2..0000000
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __OMAP_SECURE_H__
-#define __OMAP_SECURE_H__
-
-#include <linux/types.h>
-
-extern int omap_secure_ram_reserve_memblock(void);
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-#endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
deleted file mode 100644
index 36d6a76..0000000
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG 0x010
-#define SDRC_CS_CFG 0x040
-#define SDRC_SHARING 0x044
-#define SDRC_ERR_TYPE 0x04C
-#define SDRC_DLLA_CTRL 0x060
-#define SDRC_DLLA_STATUS 0x064
-#define SDRC_DLLB_CTRL 0x068
-#define SDRC_DLLB_STATUS 0x06C
-#define SDRC_POWER 0x070
-#define SDRC_MCFG_0 0x080
-#define SDRC_MR_0 0x084
-#define SDRC_EMR2_0 0x08c
-#define SDRC_ACTIM_CTRL_A_0 0x09c
-#define SDRC_ACTIM_CTRL_B_0 0x0a0
-#define SDRC_RFR_CTRL_0 0x0a4
-#define SDRC_MANUAL_0 0x0a8
-#define SDRC_MCFG_1 0x0B0
-#define SDRC_MR_1 0x0B4
-#define SDRC_EMR2_1 0x0BC
-#define SDRC_ACTIM_CTRL_A_1 0x0C4
-#define SDRC_ACTIM_CTRL_B_1 0x0C8
-#define SDRC_RFR_CTRL_1 0x0D4
-#define SDRC_MANUAL_1 0x0D8
-
-#define SDRC_POWER_AUTOCOUNT_SHIFT 8
-#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
-#define SDRC_POWER_CLKCTRL_SHIFT 4
-#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
-#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-#define OMAP242X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG 0x010
-#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context)
-#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context)
-#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context)
-/* REVISIT: fill in other SMS registers here */
-
-
-#ifndef __ASSEMBLER__
-
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip. These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files. The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
- unsigned long rate;
- u32 actim_ctrla;
- u32 actim_ctrlb;
- u32 rfr_ctrl;
- u32 mr;
-};
-
-#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
-void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1);
-#else
-static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1) {};
-#endif
-
-int omap2_sdrc_get_params(unsigned long r,
- struct omap_sdrc_params **sdrc_cs0,
- struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
-void omap2_sms_restore_context(void);
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx);
-void omap2_sms_write_rot_size(u32 val, unsigned ctx);
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
-
-#ifdef CONFIG_ARCH_OMAP2
-
-struct memory_timings {
- u32 m_type; /* ddr = 1, sdr = 0 */
- u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
- u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
- u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
- u32 base_cs; /* base chip select to use for calculations */
-};
-
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
-
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#endif /* __ASSEMBLER__ */
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 227ae26..ba45250 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -1,18 +1,8 @@
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+int omap_sram_init(void);
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
+void omap_map_sram(unsigned long start, unsigned long size,
+ unsigned long skip, int cached);
+void omap_sram_reset(void);
extern void *omap_sram_push_address(unsigned long size);
@@ -24,82 +14,3 @@
_res = fncpy(_sram_address, &(funcp), size); \
_res; \
})
-
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-extern u32 omap3_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA 0x40200000
-#define OMAP3_SRAM_PA 0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA 0x40304000
-#define OMAP4_SRAM_VA 0xfe404000
-#else
-#define OMAP4_SRAM_PA 0x40300000
-#endif
-#define AM33XX_SRAM_PA 0x40300000
-#endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
deleted file mode 100644
index 7f7b112..0000000
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include <plat/serial.h>
-
-#define MDR1_MODE_MASK 0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
- /*
- * Get address of some.bss variable and round it down
- * a la CONFIG_AUTO_ZRELADDR.
- */
- u32 ram_start = (u32)&uart_shift & 0xf8000000;
- u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
- *uart_info = port;
-}
-
-static void putc(int c)
-{
- if (!uart_base)
- return;
-
- /* Check for UART 16x mode */
- if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
- return;
-
- while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
- barrier();
- uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
- if (machine_is_##mach()) { \
- uart_base = (volatile u8 *)(dbg_uart); \
- uart_shift = (dbg_shft); \
- port = (dbg_id); \
- set_omap_uart_info(port); \
- break; \
- }
-
-#define DEBUG_LL_OMAP7XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP2(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP2UART##p)
-
-#define DEBUG_LL_OMAP3(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP3UART##p)
-
-#define DEBUG_LL_OMAP4(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP4UART##p)
-
-#define DEBUG_LL_OMAP5(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP5UART##p)
-/* Zoom2/3 shift is different for UART1 and external port */
-#define DEBUG_LL_ZOOM(mach) \
- _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-
-#define DEBUG_LL_TI81XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- TI81XXUART##p)
-
-#define DEBUG_LL_AM33XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- AM33XXUART##p)
-
-static inline void arch_decomp_setup(void)
-{
- int port = 0;
-
- /*
- * Initialize the port based on the machine ID from the bootloader.
- * Note that we're using macros here instead of switch statement
- * as machine_is functions are optimized out for the boards that
- * are not selected.
- */
- do {
- /* omap7xx/8xx based boards using UART1 with shift 0 */
- DEBUG_LL_OMAP7XX(1, herald);
- DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
- /* omap15xx/16xx based boards using UART1 */
- DEBUG_LL_OMAP1(1, ams_delta);
- DEBUG_LL_OMAP1(1, nokia770);
- DEBUG_LL_OMAP1(1, omap_h2);
- DEBUG_LL_OMAP1(1, omap_h3);
- DEBUG_LL_OMAP1(1, omap_innovator);
- DEBUG_LL_OMAP1(1, omap_osk);
- DEBUG_LL_OMAP1(1, omap_palmte);
- DEBUG_LL_OMAP1(1, omap_palmz71);
-
- /* omap15xx/16xx based boards using UART2 */
- DEBUG_LL_OMAP1(2, omap_palmtt);
-
- /* omap15xx/16xx based boards using UART3 */
- DEBUG_LL_OMAP1(3, sx1);
-
- /* omap2 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap_2430sdp);
- DEBUG_LL_OMAP2(1, omap_apollon);
- DEBUG_LL_OMAP2(1, omap_h4);
-
- /* omap2 based boards using UART3 */
- DEBUG_LL_OMAP2(3, nokia_n800);
- DEBUG_LL_OMAP2(3, nokia_n810);
- DEBUG_LL_OMAP2(3, nokia_n810_wimax);
-
- /* omap3 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap3evm);
- DEBUG_LL_OMAP3(1, omap_3430sdp);
- DEBUG_LL_OMAP3(1, omap_3630sdp);
- DEBUG_LL_OMAP3(1, omap3530_lv_som);
- DEBUG_LL_OMAP3(1, omap3_torpedo);
-
- /* omap3 based boards using UART3 */
- DEBUG_LL_OMAP3(3, cm_t35);
- DEBUG_LL_OMAP3(3, cm_t3517);
- DEBUG_LL_OMAP3(3, cm_t3730);
- DEBUG_LL_OMAP3(3, craneboard);
- DEBUG_LL_OMAP3(3, devkit8000);
- DEBUG_LL_OMAP3(3, igep0020);
- DEBUG_LL_OMAP3(3, igep0030);
- DEBUG_LL_OMAP3(3, nokia_rm680);
- DEBUG_LL_OMAP3(3, nokia_rm696);
- DEBUG_LL_OMAP3(3, nokia_rx51);
- DEBUG_LL_OMAP3(3, omap3517evm);
- DEBUG_LL_OMAP3(3, omap3_beagle);
- DEBUG_LL_OMAP3(3, omap3_pandora);
- DEBUG_LL_OMAP3(3, omap_ldp);
- DEBUG_LL_OMAP3(3, overo);
- DEBUG_LL_OMAP3(3, touchbook);
-
- /* omap4 based boards using UART3 */
- DEBUG_LL_OMAP4(3, omap_4430sdp);
- DEBUG_LL_OMAP4(3, omap4_panda);
-
- /* omap5 based boards using UART3 */
- DEBUG_LL_OMAP5(3, omap5_sevm);
-
- /* zoom2/3 external uart */
- DEBUG_LL_ZOOM(omap_zoom2);
- DEBUG_LL_ZOOM(omap_zoom3);
-
- /* TI8168 base boards using UART3 */
- DEBUG_LL_TI81XX(3, ti8168evm);
-
- /* TI8148 base boards using UART1 */
- DEBUG_LL_TI81XX(1, ti8148evm);
-
- /* AM33XX base boards using UART1 */
- DEBUG_LL_AM33XX(1, am335xevm);
- } while (0);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
deleted file mode 100644
index 87ee140..0000000
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ /dev/null
@@ -1,179 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef __ASM_ARCH_OMAP_USB_H
-#define __ASM_ARCH_OMAP_USB_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#define OMAP3_HS_USB_PORTS 3
-
-enum usbhs_omap_port_mode {
- OMAP_USBHS_PORT_MODE_UNUSED,
- OMAP_EHCI_PORT_MODE_PHY,
- OMAP_EHCI_PORT_MODE_TLL,
- OMAP_EHCI_PORT_MODE_HSIC,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
-};
-
-struct usbhs_omap_board_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- /* have to be valid if phy_reset is true and portx is in phy mode */
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
-
- /* Set this to true for ES2.x silicon */
- unsigned es2_compatibility:1;
-
- unsigned phy_reset:1;
-
- /*
- * Regulators for USB PHYs.
- * Each PHY can have a separate regulator.
- */
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-struct ehci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
- unsigned phy_reset:1;
-};
-
-struct ohci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- unsigned es2_compatibility:1;
-};
-
-struct usbhs_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- struct ehci_hcd_omap_platform_data *ehci_data;
- struct ohci_hcd_omap_platform_data *ohci_data;
-};
-
-struct usbtll_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-};
-/*-------------------------------------------------------------------------*/
-
-struct omap_musb_board_data {
- u8 interface_type;
- u8 mode;
- u16 power;
- unsigned extvbus:1;
- void (*set_phy_power)(u8 on);
- void (*clear_irq)(void);
- void (*set_mode)(u8 mode);
- void (*reset)(void);
-};
-
-enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
-
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE (1 << 23)
-#define CONF2_OTGMODE (3 << 14)
-#define CONF2_NO_OVERRIDE (0 << 14)
-#define CONF2_FORCE_HOST (1 << 14)
-#define CONF2_FORCE_DEVICE (2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN (1 << 13)
-#define CONF2_VBDTCTEN (1 << 12)
-#define CONF2_REFFREQ_24MHZ (2 << 8)
-#define CONF2_REFFREQ_26MHZ (7 << 8)
-#define CONF2_REFFREQ_13MHZ (6 << 8)
-#define CONF2_REFFREQ (0xf << 8)
-#define CONF2_PHYCLKGD (1 << 7)
-#define CONF2_VBUSSENSE (1 << 6)
-#define CONF2_PHY_PLLON (1 << 5)
-#define CONF2_RESET (1 << 4)
-#define CONF2_PHYPWRDN (1 << 3)
-#define CONF2_OTGPWRDN (1 << 2)
-#define CONF2_DATPOL (1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0 0x620
-#define USBSTAT0 0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN (1 << 0)
-#define USBPHY_OTG_PWRDN (1 << 1)
-#define USBPHY_CHGDET_DIS (1 << 2)
-#define USBPHY_CHGDET_RSTRT (1 << 3)
-#define USBPHY_SRCONDM (1 << 4)
-#define USBPHY_SINKONDP (1 << 5)
-#define USBPHY_CHGISINK_EN (1 << 6)
-#define USBPHY_CHGVSRC_EN (1 << 7)
-#define USBPHY_DMPULLUP (1 << 8)
-#define USBPHY_DPPULLUP (1 << 9)
-#define USBPHY_CDET_EXTCTL (1 << 10)
-#define USBPHY_GPIO_MODE (1 << 12)
-#define USBPHY_DPOPBUFCTL (1 << 13)
-#define USBPHY_DMOPBUFCTL (1 << 14)
-#define USBPHY_DPINPUT (1 << 15)
-#define USBPHY_DMINPUT (1 << 16)
-#define USBPHY_DPGPIO_PD (1 << 17)
-#define USBPHY_DMGPIO_PD (1 << 18)
-#define USBPHY_OTGVDET_EN (1 << 19)
-#define USBPHY_OTGSESSEND_EN (1 << 20)
-#define USBPHY_DATA_POLARITY (1 << 23)
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
- return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
- return 0;
-
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 28acb38..743fc28 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -20,198 +20,20 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/cpu.h>
-
-#include "sram.h"
-
-/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
-#include "../mach-omap2/iomap.h"
-#include "../mach-omap2/prm2xxx_3xxx.h"
-#include "../mach-omap2/sdrc.h"
-
-#define OMAP1_SRAM_PA 0x20000000
-#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
-#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#endif
-#define OMAP5_SRAM_PA 0x40300000
-
-#if defined(CONFIG_ARCH_OMAP2PLUS)
-#define SRAM_BOOTLOADER_SZ 0x00
-#else
-#define SRAM_BOOTLOADER_SZ 0x80
-#endif
-
-#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
-
-#define GP_DEVICE 0x300
-
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
-static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
/*
- * Depending on the target RAMFS firewall setup, the public usable amount of
- * SRAM varies. The default accessible size for all device types is 2k. A GP
- * device allows ARM11 but not other initiators for full size. This
- * functionality seems ok until some nice security API happens.
- */
-static int is_sram_locked(void)
-{
- if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
- /* RAMFW: R/W access to all initiators for all qualifier sets */
- if (cpu_is_omap242x()) {
- __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
- __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
- }
- if (cpu_is_omap34xx()) {
- __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
- __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
- __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
- __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
- }
- return 0;
- } else
- return 1; /* assume locked with no PPA or security driver */
-}
-
-/*
- * The amount of SRAM depends on the core type.
- * Note that we cannot try to test for SRAM here because writes
- * to secure SRAM will hang the system. Also the SRAM is not
- * yet mapped at this point.
- */
-static void __init omap_detect_sram(void)
-{
- omap_sram_skip = SRAM_BOOTLOADER_SZ;
- if (cpu_class_is_omap2()) {
- if (is_sram_locked()) {
- if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PUB_PA;
- if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
- (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
- omap_sram_size = 0x7000; /* 28K */
- omap_sram_skip += SZ_16K;
- } else {
- omap_sram_size = 0x8000; /* 32K */
- }
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PUB_PA;
- omap_sram_size = 0xa000; /* 40K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
- } else {
- omap_sram_start = OMAP2_SRAM_PUB_PA;
- omap_sram_size = 0x800; /* 2K */
- }
- } else {
- if (soc_is_am33xx()) {
- omap_sram_start = AM33XX_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PA;
- omap_sram_size = 0xe000; /* 56K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
- } else {
- omap_sram_start = OMAP2_SRAM_PA;
- if (cpu_is_omap242x())
- omap_sram_size = 0xa0000; /* 640K */
- else if (cpu_is_omap243x())
- omap_sram_size = 0x10000; /* 64K */
- }
- }
- } else {
- omap_sram_start = OMAP1_SRAM_PA;
-
- if (cpu_is_omap7xx())
- omap_sram_size = 0x32000; /* 200K */
- else if (cpu_is_omap15xx())
- omap_sram_size = 0x30000; /* 192K */
- else if (cpu_is_omap1610() || cpu_is_omap1611() ||
- cpu_is_omap1621() || cpu_is_omap1710())
- omap_sram_size = 0x4000; /* 16K */
- else {
- pr_err("Could not detect SRAM size\n");
- omap_sram_size = 0x4000;
- }
- }
-}
-
-/*
- * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
- */
-static void __init omap_map_sram(void)
-{
- int cached = 1;
-
- if (omap_sram_size == 0)
- return;
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
- if (cpu_is_omap44xx()) {
- omap_sram_start += PAGE_SIZE;
- omap_sram_size -= SZ_16K;
- }
-#endif
- if (cpu_is_omap34xx()) {
- /*
- * SRAM must be marked as non-cached on OMAP3 since the
- * CORE DPLL M2 divider change code (in SRAM) runs with the
- * SDRAM controller disabled, and if it is marked cached,
- * the ARM may attempt to write cache lines back to SDRAM
- * which will cause the system to hang.
- */
- cached = 0;
- }
-
- omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
- omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
- cached);
- if (!omap_sram_base) {
- pr_err("SRAM: Could not map\n");
- return;
- }
-
- omap_sram_ceil = omap_sram_base + omap_sram_size;
-
- /*
- * Looks like we need to preserve some bootloader code at the
- * beginning of SRAM for jumping to flash for reboot to work...
- */
- memset_io(omap_sram_base + omap_sram_skip, 0,
- omap_sram_size - omap_sram_skip);
-}
-
-/*
* Memory allocator for SRAM: calculates the new ceiling address
* for pushing a function using the fncpy API.
*
@@ -236,171 +58,39 @@
return (void *)omap_sram_ceil;
}
-#ifdef CONFIG_ARCH_OMAP1
-
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
- BUG_ON(!_omap_sram_reprogram_clock);
- /* On 730, bit 13 must always be 1 */
- if (cpu_is_omap7xx())
- ckctl |= 0x2000;
- _omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
-static int __init omap1_sram_init(void)
-{
- _omap_sram_reprogram_clock =
- omap_sram_push(omap1_sram_reprogram_clock,
- omap1_sram_reprogram_clock_sz);
-
- return 0;
-}
-
-#else
-#define omap1_sram_init() do {} while (0)
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock)
-{
- BUG_ON(!_omap2_sram_ddr_init);
- _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
- base_cs, force_unlock);
-}
-
-static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
- u32 mem_type);
-
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
-{
- BUG_ON(!_omap2_sram_reprogram_sdrc);
- _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
-}
-
-static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
-{
- BUG_ON(!_omap2_set_prcm);
- return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2420
-static int __init omap242x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
- omap242x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
- omap242x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
- omap242x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap242x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static int __init omap243x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
- omap243x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
- omap243x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
- omap243x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap243x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-
-static u32 (*_omap3_sram_configure_core_dpll)(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
- BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(
- m2, unlock_dll, f, inc,
- sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
- sdrc_actim_ctrl_b_0, sdrc_mr_0,
- sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
- sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
-void omap3_sram_restore_context(void)
+/*
+ * The SRAM context is lost during off-idle and stack
+ * needs to be reset.
+ */
+void omap_sram_reset(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
-
- _omap3_sram_configure_core_dpll =
- omap_sram_push(omap3_sram_configure_core_dpll,
- omap3_sram_configure_core_dpll_sz);
- omap_push_sram_idle();
}
-static inline int omap34xx_sram_init(void)
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+void __init omap_map_sram(unsigned long start, unsigned long size,
+ unsigned long skip, int cached)
{
- omap3_sram_restore_context();
- return 0;
-}
-#else
-static inline int omap34xx_sram_init(void)
-{
- return 0;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
+ if (size == 0)
+ return;
-static inline int am33xx_sram_init(void)
-{
- return 0;
-}
+ start = ROUND_DOWN(start, PAGE_SIZE);
+ omap_sram_size = size;
+ omap_sram_skip = skip;
+ omap_sram_base = __arm_ioremap_exec(start, size, cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
-int __init omap_sram_init(void)
-{
- omap_detect_sram();
- omap_map_sram();
+ omap_sram_reset();
- if (!(cpu_class_is_omap2()))
- omap1_sram_init();
- else if (cpu_is_omap242x())
- omap242x_sram_init();
- else if (cpu_is_omap2430())
- omap243x_sram_init();
- else if (soc_is_am33xx())
- am33xx_sram_init();
- else if (cpu_is_omap34xx())
- omap34xx_sram_init();
-
- return 0;
+ /*
+ * Looks like we need to preserve some bootloader code at the
+ * beginning of SRAM for jumping to flash for reboot to work...
+ */
+ memset_io(omap_sram_base + omap_sram_skip, 0,
+ omap_sram_size - omap_sram_skip);
}
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
deleted file mode 100644
index 29b43ef..0000000
--- a/arch/arm/plat-omap/sram.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __PLAT_OMAP_SRAM_H__
-#define __PLAT_OMAP_SRAM_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __PLAT_OMAP_SRAM_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 70742ec..d485b03 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -26,7 +26,6 @@
}
-#define ATMEL_MAX_UART 4
extern struct platform_device *atmel_default_console_device;
/* Flags for selecting USART extra pins */
@@ -34,13 +33,6 @@
#define ATMEL_USART_CTS 0x02
#define ATMEL_USART_CLK 0x04
-struct atmel_uart_data {
- int num; /* port num */
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virtual base address, if any */
- struct serial_rs485 rs485; /* rs485 settings */
-};
void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
struct platform_device *at32_add_device_usart(unsigned int id);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 53d3770..2a96bb2 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -27,9 +27,9 @@
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
+#include <linux/platform_data/atmel.h>
#include <mach/at91sam9_smc.h>
-#include <mach/board.h>
#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index a5effd8..45e467d 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -27,8 +27,6 @@
#include <asm/io.h>
-#include <plat/cpu.h>
-
#define RNG_OUT_REG 0x00 /* Output register */
#define RNG_STAT_REG 0x04 /* Status register
[0] = STAT_BUSY */
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 093a8af..649a146 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -29,8 +29,7 @@
#include <crypto/scatterwalk.h>
#include <crypto/aes.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
/* OMAP TRM gives bitfields as start:end, where start is the higher bit
number. For example 7:0 */
@@ -941,11 +940,6 @@
{
pr_info("loading %s driver\n", "omap-aes");
- if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) {
- pr_err("Unsupported cpu\n");
- return -ENODEV;
- }
-
return platform_driver_register(&omap_aes_driver);
}
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index a3fd6fc..d76fe06 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -37,8 +37,7 @@
#include <crypto/hash.h>
#include <crypto/internal/hash.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irqs.h>
#define SHA_REG_DIGEST(x) (0x00 + ((x) * 0x04))
@@ -1289,13 +1288,6 @@
{
pr_info("loading %s driver\n", "omap-sham");
- if (!cpu_class_is_omap2() ||
- (omap_type() != OMAP2_DEVICE_TYPE_SEC &&
- omap_type() != OMAP2_DEVICE_TYPE_EMU)) {
- pr_err("Unsupported cpu\n");
- return -ENODEV;
- }
-
return platform_driver_register(&omap_sham_driver);
}
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index bb2d8e7..7d35c23 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -19,8 +19,7 @@
#include "virt-dma.h"
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
struct omap_dmadev {
struct dma_device ddev;
@@ -438,7 +437,7 @@
omap_disable_dma_irq(c->dma_ch, OMAP_DMA_BLOCK_IRQ);
}
- if (!cpu_class_is_omap1()) {
+ if (dma_omap2plus()) {
omap_set_dma_src_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
omap_set_dma_dest_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
}
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 201b2d2..ea392ee 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,7 +22,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/board.h>
+#include <linux/platform_data/atmel.h>
#include <mach/cpu.h>
/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 14a4d5f..f66b816 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_INTEL_IOMMU) += iova.o intel-iommu.o
obj-$(CONFIG_IRQ_REMAP) += intel_irq_remapping.o irq_remapping.o
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
+obj-$(CONFIG_OMAP_IOMMU) += omap-iommu2.o
obj-$(CONFIG_OMAP_IOVMM) += omap-iovmm.o
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
obj-$(CONFIG_TEGRA_IOMMU_GART) += tegra-gart.o
diff --git a/drivers/iommu/omap-iommu-debug.c b/drivers/iommu/omap-iommu-debug.c
index f55fc5d..d97fbe4 100644
--- a/drivers/iommu/omap-iommu-debug.c
+++ b/drivers/iommu/omap-iommu-debug.c
@@ -18,11 +18,11 @@
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/debugfs.h>
+#include <linux/omap-iommu.h>
+#include <linux/platform_data/iommu-omap.h>
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
-
-#include <plat/iopgtable.h>
+#include "omap-iopgtable.h"
+#include "omap-iommu.h"
#define MAXCOLUMN 100 /* for short messages */
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index d0b1234..badc17c 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -19,14 +19,17 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/iommu.h>
+#include <linux/omap-iommu.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <plat/iommu.h>
+#include <linux/platform_data/iommu-omap.h>
-#include <plat/iopgtable.h>
+#include "omap-iopgtable.h"
+#include "omap-iommu.h"
#define for_each_iotlb_cr(obj, n, __i, cr) \
for (__i = 0; \
@@ -51,6 +54,21 @@
spinlock_t lock;
};
+#define MMU_LOCK_BASE_SHIFT 10
+#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x) \
+ ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT 4
+#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x) \
+ ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+struct iotlb_lock {
+ short base;
+ short vict;
+};
+
/* accommodate the difference between omap1 and omap2/3 */
static const struct iommu_functions *arch_iommu;
@@ -1015,6 +1033,23 @@
clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
}
+static u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+ u32 flags)
+{
+ memset(e, 0, sizeof(*e));
+
+ e->da = da;
+ e->pa = pa;
+ e->valid = 1;
+ /* FIXME: add OMAP1 support */
+ e->pgsz = flags & MMU_CAM_PGSZ_MASK;
+ e->endian = flags & MMU_RAM_ENDIAN_MASK;
+ e->elsz = flags & MMU_RAM_ELSZ_MASK;
+ e->mixed = flags & MMU_RAM_MIXED_MASK;
+
+ return iopgsz_to_bytes(e->pgsz);
+}
+
static int omap_iommu_map(struct iommu_domain *domain, unsigned long da,
phys_addr_t pa, size_t bytes, int prot)
{
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/drivers/iommu/omap-iommu.h
similarity index 69%
rename from arch/arm/plat-omap/include/plat/iommu.h
rename to drivers/iommu/omap-iommu.h
index 68b5f03..2b5f3c0 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/drivers/iommu/omap-iommu.h
@@ -10,8 +10,9 @@
* published by the Free Software Foundation.
*/
-#ifndef __MACH_IOMMU_H
-#define __MACH_IOMMU_H
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#endif
struct iotlb_entry {
u32 da;
@@ -71,11 +72,6 @@
};
};
-struct iotlb_lock {
- short base;
- short vict;
-};
-
/* architecture specific functions */
struct iommu_functions {
unsigned long version;
@@ -103,42 +99,6 @@
ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
};
-/**
- * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod
- * @da_start: device address where the va space starts.
- * @da_end: device address where the va space ends.
- * @nr_tlb_entries: number of entries supported by the translation
- * look-aside buffer (TLB).
- */
-struct omap_mmu_dev_attr {
- u32 da_start;
- u32 da_end;
- int nr_tlb_entries;
-};
-
-struct iommu_platform_data {
- const char *name;
- const char *clk_name;
- const int nr_tlb_entries;
- u32 da_start;
- u32 da_end;
-};
-
-/**
- * struct iommu_arch_data - omap iommu private data
- * @name: name of the iommu device
- * @iommu_dev: handle of the iommu device
- *
- * This is an omap iommu private data object, which binds an iommu user
- * to its iommu device. This object should be placed at the iommu user's
- * dev_archdata so generic IOMMU API can be used without having to
- * utilize omap-specific plumbing anymore.
- */
-struct omap_iommu_arch_data {
- const char *name;
- struct omap_iommu *iommu_dev;
-};
-
#ifdef CONFIG_IOMMU_API
/**
* dev_to_omap_iommu() - retrieves an omap iommu object from a user device
@@ -152,18 +112,59 @@
}
#endif
-/* IOMMU errors */
-#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
-#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1)
-#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2)
-#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3)
-#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4)
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION 0x00
+#define MMU_SYSCONFIG 0x10
+#define MMU_SYSSTATUS 0x14
+#define MMU_IRQSTATUS 0x18
+#define MMU_IRQENABLE 0x1c
+#define MMU_WALKING_ST 0x40
+#define MMU_CNTL 0x44
+#define MMU_FAULT_AD 0x48
+#define MMU_TTB 0x4c
+#define MMU_LOCK 0x50
+#define MMU_LD_TLB 0x54
+#define MMU_CAM 0x58
+#define MMU_RAM 0x5c
+#define MMU_GFLUSH 0x60
+#define MMU_FLUSH_ENTRY 0x64
+#define MMU_READ_CAM 0x68
+#define MMU_READ_RAM 0x6c
+#define MMU_EMU_FAULT_AD 0x70
-#if defined(CONFIG_ARCH_OMAP1)
-#error "iommu for this processor not implemented yet"
-#else
-#include <plat/iommu2.h>
-#endif
+#define MMU_REG_SIZE 256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_CAM_VATAG_SHIFT 12
+#define MMU_CAM_VATAG_MASK \
+ ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P (1 << 3)
+#define MMU_CAM_V (1 << 2)
+#define MMU_CAM_PGSZ_MASK 3
+#define MMU_CAM_PGSZ_1M (0 << 0)
+#define MMU_CAM_PGSZ_64K (1 << 0)
+#define MMU_CAM_PGSZ_4K (2 << 0)
+#define MMU_CAM_PGSZ_16M (3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT 12
+#define MMU_RAM_PADDR_MASK \
+ ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+
+#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
+
+#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT 6
+#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
/*
* utilities for super page(16MB, 1MB, 64KB and 4KB)
@@ -199,23 +200,29 @@
extern int
omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e);
-extern int omap_iommu_set_isr(const char *name,
- int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs,
- void *priv),
- void *isr_priv);
-
extern void omap_iommu_save_ctx(struct device *dev);
extern void omap_iommu_restore_ctx(struct device *dev);
-extern int omap_install_iommu_arch(const struct iommu_functions *ops);
-extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
-
extern int omap_foreach_iommu_device(void *data,
int (*fn)(struct device *, void *));
+extern int omap_install_iommu_arch(const struct iommu_functions *ops);
+extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
+
extern ssize_t
omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
extern size_t
omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
-#endif /* __MACH_IOMMU_H */
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
+{
+ return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
+{
+ __raw_writel(val, obj->regbase + offs);
+}
diff --git a/arch/arm/mach-omap2/iommu2.c b/drivers/iommu/omap-iommu2.c
similarity index 95%
rename from arch/arm/mach-omap2/iommu2.c
rename to drivers/iommu/omap-iommu2.c
index eefc379..c020202 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/drivers/iommu/omap-iommu2.c
@@ -13,12 +13,15 @@
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/omap-iommu.h>
#include <linux/slab.h>
#include <linux/stringify.h>
+#include <linux/platform_data/iommu-omap.h>
-#include <plat/iommu.h>
+#include "omap-iommu.h"
/*
* omap2 architecture specific register bit definitions
@@ -65,6 +68,12 @@
((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
+/* IOMMU errors */
+#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
+#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1)
+#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2)
+#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3)
+#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4)
static void __iommu_set_twl(struct omap_iommu *obj, bool on)
{
diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/drivers/iommu/omap-iopgtable.h
similarity index 84%
rename from arch/arm/plat-omap/include/plat/iopgtable.h
rename to drivers/iommu/omap-iopgtable.h
index 66a8139..cd4ae9e 100644
--- a/arch/arm/plat-omap/include/plat/iopgtable.h
+++ b/drivers/iommu/omap-iopgtable.h
@@ -10,9 +10,6 @@
* published by the Free Software Foundation.
*/
-#ifndef __PLAT_OMAP_IOMMU_H
-#define __PLAT_OMAP_IOMMU_H
-
/*
* "L2 table" address mask and size definitions.
*/
@@ -97,24 +94,5 @@
#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da))
-static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
- u32 flags)
-{
- memset(e, 0, sizeof(*e));
-
- e->da = da;
- e->pa = pa;
- e->valid = 1;
- /* FIXME: add OMAP1 support */
- e->pgsz = flags & MMU_CAM_PGSZ_MASK;
- e->endian = flags & MMU_RAM_ENDIAN_MASK;
- e->elsz = flags & MMU_RAM_ELSZ_MASK;
- e->mixed = flags & MMU_RAM_MIXED_MASK;
-
- return iopgsz_to_bytes(e->pgsz);
-}
-
#define to_iommu(dev) \
(struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
-
-#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/drivers/iommu/omap-iovmm.c b/drivers/iommu/omap-iovmm.c
index 2e10c3e..46d87569 100644
--- a/drivers/iommu/omap-iovmm.c
+++ b/drivers/iommu/omap-iovmm.c
@@ -17,14 +17,58 @@
#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/iommu.h>
+#include <linux/omap-iommu.h>
+#include <linux/platform_data/iommu-omap.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
+#include "omap-iopgtable.h"
+#include "omap-iommu.h"
-#include <plat/iopgtable.h>
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT 16
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK (~((1 << 10) - 1))
+#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK (3 << 0)
+#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK (1 << 9)
+#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
+
+#define IOVMF_ELSZ_MASK (3 << 7)
+#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK (1 << 6)
+#define IOVMF_MIXED MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
static struct kmem_cache *iovm_area_cachep;
diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
index a3b1a34..4b1becc 100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@ -45,8 +45,8 @@
#include <media/v4l2-ioctl.h>
#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <plat-omap/dma-omap.h>
+#include <video/omapvrfb.h>
#include <video/omapdss.h>
#include "omap_voutlib.h"
diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 4be26abf6c..8340445 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -16,12 +16,14 @@
#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>
-#include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <plat-omap/dma-omap.h>
+#include <video/omapvrfb.h>
#include "omap_voutdef.h"
#include "omap_voutlib.h"
+#define OMAP_DMA_NO_DEVICE 0
+
/*
* Function for allocating video buffers
*/
diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
index 27a95d2..9ccfe1f 100644
--- a/drivers/media/platform/omap/omap_voutdef.h
+++ b/drivers/media/platform/omap/omap_voutdef.h
@@ -12,7 +12,7 @@
#define OMAP_VOUTDEF_H
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#define YUYV_BPP 2
#define RGB565_BPP 2
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 99640d8..7f182f0 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -61,6 +61,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/omap-iommu.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
diff --git a/drivers/media/platform/omap3isp/isp.h b/drivers/media/platform/omap3isp/isp.h
index 8be7487..8d68669 100644
--- a/drivers/media/platform/omap3isp/isp.h
+++ b/drivers/media/platform/omap3isp/isp.h
@@ -31,11 +31,9 @@
#include <media/v4l2-device.h>
#include <linux/device.h>
#include <linux/io.h>
+#include <linux/iommu.h>
#include <linux/platform_device.h>
#include <linux/wait.h>
-#include <linux/iommu.h>
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
#include "ispstat.h"
#include "ispccdc.h"
diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c
index aa9df9d..60e60aa 100644
--- a/drivers/media/platform/omap3isp/ispccdc.c
+++ b/drivers/media/platform/omap3isp/ispccdc.c
@@ -30,6 +30,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
+#include <linux/omap-iommu.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <media/v4l2-event.h>
diff --git a/drivers/media/platform/omap3isp/isphist.c b/drivers/media/platform/omap3isp/isphist.c
index d1a8dee..e7f9c42 100644
--- a/drivers/media/platform/omap3isp/isphist.c
+++ b/drivers/media/platform/omap3isp/isphist.c
@@ -34,6 +34,8 @@
#include "ispreg.h"
#include "isphist.h"
+#define OMAP24XX_DMA_NO_DEVICE 0
+
#define HIST_CONFIG_DMA 1
#define HIST_USING_DMA(hist) ((hist)->dma_ch >= 0)
diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c
index b8640be..e793986 100644
--- a/drivers/media/platform/omap3isp/ispstat.c
+++ b/drivers/media/platform/omap3isp/ispstat.c
@@ -26,6 +26,7 @@
*/
#include <linux/dma-mapping.h>
+#include <linux/omap-iommu.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h
index 9b7c865..99cf104 100644
--- a/drivers/media/platform/omap3isp/ispstat.h
+++ b/drivers/media/platform/omap3isp/ispstat.h
@@ -30,7 +30,7 @@
#include <linux/types.h>
#include <linux/omap3isp.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <media/v4l2-event.h>
#include "isp.h"
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index 75cd309..3311d6b 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -27,6 +27,7 @@
#include <linux/clk.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/omap-iommu.h>
#include <linux/pagemap.h>
#include <linux/scatterlist.h>
#include <linux/sched.h>
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index 13636a5..d3cfe65 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -34,12 +34,13 @@
#include <media/videobuf-dma-contig.h>
#include <media/videobuf-dma-sg.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#define DRIVER_NAME "omap1-camera"
#define DRIVER_VERSION "0.0.2"
+#define OMAP_DMA_CAMERA_IF_RX 20
/*
* ---------------------------------------------------------------------------
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 546199e..82e6c1e 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -28,7 +28,6 @@
#include <plat/dmtimer.h>
#include <plat/clock.h>
-#include <plat/omap-pm.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 55d58998..998ce8c 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -41,11 +41,11 @@
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/slab.h>
+#include <linux/mfd/menelaus.h>
#include <asm/mach/irq.h>
#include <asm/gpio.h>
-#include <plat/menelaus.h>
#define DRIVER_NAME "menelaus"
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 29b8ed2..770a0d0 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -26,9 +26,12 @@
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/cpu.h>
-#include <plat/usb.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h>
+#include "omap-usb.h"
+
#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 401b976..eb86915 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -25,8 +25,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
-#include <plat/usb.h>
#include <linux/pm_runtime.h>
+#include <linux/platform_data/usb-omap.h>
#define USBTLL_DRIVER_NAME "usbhs_tll"
diff --git a/drivers/mfd/omap-usb.h b/drivers/mfd/omap-usb.h
new file mode 100644
index 0000000..972aa96
--- /dev/null
+++ b/drivers/mfd/omap-usb.h
@@ -0,0 +1,2 @@
+extern int omap_tll_enable(void);
+extern int omap_tll_disable(void);
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 5248ba4..722af1d 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -28,6 +28,7 @@
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/types.h>
+#include <linux/platform_data/atmel.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
@@ -40,7 +41,6 @@
#include <asm/unaligned.h>
#include <mach/cpu.h>
-#include <mach/board.h>
#include "atmel-mci-regs.h"
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 4e749ab..4254975 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -28,9 +28,8 @@
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/platform_data/mmc-omap.h>
-#include <plat/mmc.h>
-#include <plat/dma.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x01
@@ -72,6 +71,13 @@
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
+#define mmc_omap7xx() (host->features & MMC_OMAP7XX)
+#define mmc_omap15xx() (host->features & MMC_OMAP15XX)
+#define mmc_omap16xx() (host->features & MMC_OMAP16XX)
+#define MMC_OMAP1_MASK (MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
+#define mmc_omap1() (host->features & MMC_OMAP1_MASK)
+#define mmc_omap2() (!mmc_omap1())
+
#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
@@ -84,6 +90,16 @@
#define OMAP_MMC_CMDTYPE_AC 2
#define OMAP_MMC_CMDTYPE_ADTC 3
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+
+#define OMAP24XX_DMA_MMC2_TX 47
+#define OMAP24XX_DMA_MMC2_RX 48
+#define OMAP24XX_DMA_MMC1_TX 61
+#define OMAP24XX_DMA_MMC1_RX 62
+
#define DRIVER_NAME "mmci-omap"
@@ -147,6 +163,7 @@
u32 buffer_bytes_left;
u32 total_bytes_left;
+ unsigned features;
unsigned use_dma:1;
unsigned brs_received:1, dma_done:1;
unsigned dma_in_use:1;
@@ -988,7 +1005,7 @@
* blocksize is at least that large. Blocksize is
* usually 512 bytes; but not for some SD reads.
*/
- burst = cpu_is_omap15xx() ? 32 : 64;
+ burst = mmc_omap15xx() ? 32 : 64;
if (burst > data->blksz)
burst = data->blksz;
@@ -1104,8 +1121,7 @@
if (slot->pdata->set_power != NULL)
slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
vdd);
-
- if (cpu_is_omap24xx()) {
+ if (mmc_omap2()) {
u16 w;
if (power_on) {
@@ -1239,7 +1255,7 @@
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
- if (cpu_class_is_omap2())
+ if (mmc_omap2())
mmc->f_max = 48000000;
else
mmc->f_max = 24000000;
@@ -1359,6 +1375,7 @@
init_waitqueue_head(&host->slot_wq);
host->pdata = pdata;
+ host->features = host->pdata->slots[0].features;
host->dev = &pdev->dev;
platform_set_drvdata(pdev, host);
@@ -1391,7 +1408,7 @@
host->dma_tx_burst = -1;
host->dma_rx_burst = -1;
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
@@ -1407,7 +1424,7 @@
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
sig);
#endif
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
@@ -1435,7 +1452,7 @@
}
host->nr_slots = pdata->nr_slots;
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+ host->reg_shift = (mmc_omap7xx() ? 1 : 2);
host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
if (!host->mmc_omap_wq)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e1f3c11..bc58078 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -39,9 +39,7 @@
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
-#include <mach/hardware.h>
-#include <plat/mmc.h>
-#include <plat/cpu.h>
+#include <linux/platform_data/mmc-omap.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5b31386..5c8978e 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -27,8 +27,7 @@
#include <linux/bch.h>
#endif
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
@@ -106,10 +105,18 @@
#define CS_MASK 0x7
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE0_SHIFT 12
#define ECCSIZE1_SHIFT 22
#define ECC1RESULTSIZE 0x1
#define ECCCLEAR 0x100
#define ECC1 0x1
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define STATUS_BUFF_EMPTY 0x00000001
+
+#define OMAP24XX_DMA_GPMC 4
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
@@ -269,7 +276,7 @@
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -307,7 +314,7 @@
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -348,7 +355,7 @@
} else {
do {
r_count = readl(info->reg.gpmc_prefetch_status);
- r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+ r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
p += r_count;
@@ -395,7 +402,7 @@
} else {
while (len) {
w_count = readl(info->reg.gpmc_prefetch_status);
- w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+ w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -407,7 +414,7 @@
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
@@ -493,7 +500,7 @@
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
@@ -556,7 +563,7 @@
u32 bytes;
bytes = readl(info->reg.gpmc_prefetch_status);
- bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+ bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
if (this_irq == info->gpmc_irq_count)
@@ -682,7 +689,7 @@
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
do {
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
cpu_relax();
} while (val && (tim++ < limit));
@@ -996,7 +1003,7 @@
cond_resched();
}
- status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+ status = readb(info->reg.gpmc_nand_data);
return status;
}
@@ -1029,19 +1036,45 @@
static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
{
int nerrors;
- unsigned int dev_width;
+ unsigned int dev_width, nsectors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
struct nand_chip *chip = mtd->priv;
+ u32 val;
nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ nsectors = 1;
/*
* Program GPMC to perform correction on one 512-byte sector at a time.
* Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
* gives a slight (5%) performance gain (but requires additional code).
*/
- (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+ writel(ECC1, info->reg.gpmc_ecc_control);
+
+ /*
+ * When using BCH, sector size is hardcoded to 512 bytes.
+ * Here we are using wrapping mode 6 both for reading and writing, with:
+ * size0 = 0 (no additional protected byte in spare area)
+ * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+ val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+ writel(val, info->reg.gpmc_ecc_size_config);
+
+ /* BCH configuration */
+ val = ((1 << 16) | /* enable BCH */
+ (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+ (0x06 << 8) | /* wrap mode = 6 */
+ (dev_width << 7) | /* bus width */
+ (((nsectors-1) & 0x7) << 4) | /* number of sectors */
+ (info->gpmc_cs << 1) | /* ECC CS */
+ (0x1)); /* enable ECC */
+
+ writel(val, info->reg.gpmc_ecc_config);
+
+ /* clear ecc and enable bits */
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
}
/**
@@ -1055,7 +1088,32 @@
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs; and
+ * left-justify the resulting polynomial.
+ */
+ *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+ *ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF);
+ *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+ *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+ *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+ *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+ *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+ }
+
+ return 0;
}
/**
@@ -1069,7 +1127,39 @@
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2, val3, val4;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+ val3 = readl(info->reg.gpmc_bch_result2[i]);
+ val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs.
+ */
+ *ecc_code++ = 0xef ^ (val4 & 0xFF);
+ *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+ *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+ *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+ *ecc_code++ = 0xed ^ (val3 & 0xFF);
+ *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+ *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+ *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+ *ecc_code++ = 0x97 ^ (val2 & 0xFF);
+ *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+ *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+ *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+ *ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+ }
+
+ return 0;
}
/**
@@ -1125,7 +1215,7 @@
*/
static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
{
- int ret, max_errors;
+ int max_errors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
#ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1142,11 +1232,6 @@
goto fail;
}
- /* initialize GPMC BCH engine */
- ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
- if (ret)
- goto fail;
-
/* software bch library is only used to detect and locate errors */
info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
if (!info->bch)
@@ -1513,7 +1598,7 @@
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
iounmap(info->nand.IO_ADDR_R);
- release_mem_region(info->phys_base, NAND_IO_SIZE);
+ release_mem_region(info->phys_base, info->mem_size);
kfree(info);
return 0;
}
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 1961be9..99f96e1 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -38,12 +38,10 @@
#include <linux/regulator/consumer.h>
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
-#include <plat/dma.h>
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
#define DRIVER_NAME "omap2-onenand"
@@ -63,6 +61,7 @@
int freq;
int (*setup)(void __iomem *base, int *freq_ptr);
struct regulator *regulator;
+ u8 flags;
};
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
@@ -155,7 +154,7 @@
if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
syscfg |= ONENAND_SYS_CFG1_IOBE;
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
- if (cpu_is_omap34xx())
+ if (c->flags & ONENAND_IN_OMAP34XX)
/* Add a delay to let GPIO settle */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
}
@@ -446,13 +445,19 @@
#else
-int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
- unsigned char *buffer, int offset,
- size_t count);
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ return -ENOSYS;
+}
-int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
- const unsigned char *buffer,
- int offset, size_t count);
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ return -ENOSYS;
+}
#endif
@@ -550,13 +555,19 @@
#else
-int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
- unsigned char *buffer, int offset,
- size_t count);
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ return -ENOSYS;
+}
-int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
- const unsigned char *buffer,
- int offset, size_t count);
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ return -ENOSYS;
+}
#endif
@@ -639,6 +650,7 @@
init_completion(&c->irq_done);
init_completion(&c->dma_done);
+ c->flags = pdata->flags;
c->gpmc_cs = pdata->cs;
c->gpio_irq = pdata->gpio_irq;
c->dma_channel = pdata->dma_channel;
@@ -729,7 +741,7 @@
this = &c->onenand;
if (c->dma_channel >= 0) {
this->wait = omap2_onenand_wait;
- if (cpu_is_omap34xx()) {
+ if (c->flags & ONENAND_IN_OMAP34XX) {
this->read_bufferram = omap3_onenand_read_bufferram;
this->write_bufferram = omap3_onenand_write_bufferram;
} else {
@@ -803,7 +815,6 @@
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, c->mem_size);
- gpmc_cs_free(c->gpmc_cs);
kfree(c);
return 0;
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index fcff73a..994b6ac 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -33,12 +33,11 @@
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/platform_data/atmel.h>
#include <linux/can/dev.h>
#include <linux/can/error.h>
-#include <mach/board.h>
-
#define AT91_MB_MASK(i) ((1 << (i)) - 1)
/* Common registers */
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 4e980a78..35fc6edb 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -31,6 +31,7 @@
#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/phy.h>
+#include <linux/platform_data/atmel.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -38,7 +39,6 @@
#include <mach/at91rm9200_emac.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include "at91_ether.h"
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 9694c1e..01463c7 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/gpio.h>
+#include <linux/platform_data/atmel.h>
#include <pcmcia/ss.h>
@@ -24,7 +25,6 @@
#include <asm/io.h>
#include <asm/sizes.h>
-#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index fa74efe..25c4b199 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -25,7 +25,7 @@
#include <asm/sizes.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
/* NOTE: don't expect this to support many I/O cards. The 16xx chips have
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index fca9790..b6469e2 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -31,7 +31,7 @@
#include <asm/uaccess.h>
-#include <mach/at91_rtc.h>
+#include "rtc-at91rm9200.h"
#define at91_rtc_read(field) \
__raw_readl(at91_rtc_regs + field)
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/drivers/rtc/rtc-at91rm9200.h
similarity index 100%
rename from arch/arm/mach-at91/include/mach/at91_rtc.h
rename to drivers/rtc/rtc-at91rm9200.h
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 2dfe7a2..e981798 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -19,8 +19,8 @@
#include <linux/interrupt.h>
#include <linux/ioctl.h>
#include <linux/slab.h>
+#include <linux/platform_data/atmel.h>
-#include <mach/board.h>
#include <mach/at91_rtt.h>
#include <mach/cpu.h>
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 16d6a83..61fb0ec 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -19,9 +19,9 @@
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
+#include <linux/platform_data/atmel.h>
#include <asm/io.h>
-#include <mach/board.h>
#include <asm/gpio.h>
#include <mach/cpu.h>
diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
index 5e2f4d8..7f3a1db 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -40,7 +40,6 @@
#include <linux/vmalloc.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
-#include <plat/clock.h>
#include <linux/clk.h>
#include <plat/mailbox.h>
#include <linux/pagemap.h>
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1a8a271..922e85a 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -40,12 +40,11 @@
#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/atmel.h>
#include <asm/io.h>
#include <asm/ioctls.h>
-#include <mach/board.h>
-
#ifdef CONFIG_ARM
#include <mach/cpu.h>
#include <asm/gpio.h>
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index e6135fa..59dcea2 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -31,6 +31,7 @@
#include <linux/usb/gadget.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
@@ -38,7 +39,6 @@
#include <asm/irq.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91sam9261_matrix.h>
#include <mach/at91_matrix.h>
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 9a9bced..a7aed84 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -21,9 +21,9 @@
#include <linux/usb/gadget.h>
#include <linux/usb/atmel_usba_udc.h>
#include <linux/delay.h>
+#include <linux/platform_data/atmel.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include "atmel_usba_udc.h"
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 9412bf5..09699f6 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,7 @@
#include <asm/unaligned.h>
#include <asm/mach-types.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/usb.h>
@@ -61,6 +61,8 @@
#define DRIVER_DESC "OMAP UDC driver"
#define DRIVER_VERSION "4 October 2004"
+#define OMAP_DMA_USB_W2FC_TX0 29
+
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
* D+ pullup to allow enumeration. That's too early for the gadget
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 44e7d0f..ac17a7c 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -39,12 +39,13 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
-#include <plat/usb.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/platform_data/usb-omap.h>
+
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 221850a..a0cb44f 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -16,11 +16,11 @@
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/platform_data/atmel.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
-#include <mach/board.h>
#include <mach/cpu.h>
#ifndef CONFIG_ARCH_AT91
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 733c77c..b1d32fb 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,7 +25,6 @@
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -93,14 +92,14 @@
{
if (on) {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, LOW);
} else {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 4382af3..eb35d96 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -30,7 +30,6 @@
*/
#include <linux/platform_device.h>
-#include <plat/usb.h>
#include <linux/pm_runtime.h>
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 3d1c71b..c107d7c 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -34,8 +34,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/nop-usb-xceiv.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
#include "musb_core.h"
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 9a975aa..e6f2ae8 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -38,13 +38,12 @@
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
-#include <plat/usb.h>
-
#include "musb_core.h"
#ifdef CONFIG_OF
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index b85f397..8ef6566 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -10,7 +10,7 @@
#ifndef __MUSB_OMAP243X_H__
#define __MUSB_OMAP243X_H__
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
/*
* OMAP2430-specific definitions
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 2c46d42..9716850 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -16,7 +16,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "musb_core.h"
#include "tusb6010.h"
@@ -25,6 +25,13 @@
#define MAX_DMAREQ 5 /* REVISIT: Really 6, but req5 not OK */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2
+#define OMAP24XX_DMA_EXT_DMAREQ1 3
+#define OMAP242X_DMA_EXT_DMAREQ2 14
+#define OMAP242X_DMA_EXT_DMAREQ3 15
+#define OMAP242X_DMA_EXT_DMAREQ4 16
+#define OMAP242X_DMA_EXT_DMAREQ5 64
+
struct tusb_omap_dma_ch {
struct musb *musb;
void __iomem *tbase;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 94cac9f..12cf5f3 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -19,8 +19,8 @@
#include <linux/backlight.h>
#include <linux/gfp.h>
#include <linux/module.h>
+#include <linux/platform_data/atmel.h>
-#include <mach/board.h>
#include <mach/cpu.h>
#include <asm/gpio.h>
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index b38b1dd..2ee4232 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,7 +23,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/fpga.h>
+#include <mach/hardware.h>
+
#include "omapfb.h"
static int innovator1510_panel_init(struct lcd_panel *panel,
@@ -38,13 +39,13 @@
static int innovator1510_panel_enable(struct lcd_panel *panel)
{
- fpga_write(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
return 0;
}
static void innovator1510_panel_disable(struct lcd_panel *panel)
{
- fpga_write(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
}
static unsigned long innovator1510_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 7767338..c39d6e4 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -31,7 +31,7 @@
#include <linux/gfp.h>
#include <mach/lcdc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 4351c43..1b5ee8e 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -30,7 +30,7 @@
#include <linux/uaccess.h>
#include <linux/module.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "omapfb.h"
#include "lcdc.h"
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index f79c137..c510a44 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -25,7 +25,7 @@
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "omapfb.h"
#include "lcdc.h"
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index b2af72d..d94ef9e 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -237,7 +237,7 @@
core.pdev = pdev;
- dss_features_init();
+ dss_features_init(pdata->version);
dss_apply_init();
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b43477a..a5ab354 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,8 +37,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <plat/cpu.h>
-
#include <video/omapdss.h>
#include "dss.h"
@@ -4042,29 +4040,44 @@
.gfx_fifo_workaround = true,
};
-static int __init dispc_init_features(struct device *dev)
+static int __init dispc_init_features(struct platform_device *pdev)
{
+ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const struct dispc_features *src;
struct dispc_features *dst;
- dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
if (!dst) {
- dev_err(dev, "Failed to allocate DISPC Features\n");
+ dev_err(&pdev->dev, "Failed to allocate DISPC Features\n");
return -ENOMEM;
}
- if (cpu_is_omap24xx()) {
+ switch (pdata->version) {
+ case OMAPDSS_VER_OMAP24xx:
src = &omap24xx_dispc_feats;
- } else if (cpu_is_omap34xx()) {
- if (omap_rev() < OMAP3430_REV_ES3_0)
- src = &omap34xx_rev1_0_dispc_feats;
- else
- src = &omap34xx_rev3_0_dispc_feats;
- } else if (cpu_is_omap44xx()) {
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ src = &omap34xx_rev1_0_dispc_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_OMAP3630:
+ case OMAPDSS_VER_AM35xx:
+ src = &omap34xx_rev3_0_dispc_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
src = &omap44xx_dispc_feats;
- } else if (soc_is_omap54xx()) {
+ break;
+
+ case OMAPDSS_VER_OMAP5:
src = &omap44xx_dispc_feats;
- } else {
+ break;
+
+ default:
return -ENODEV;
}
@@ -4084,7 +4097,7 @@
dispc.pdev = pdev;
- r = dispc_init_features(&dispc.pdev->dev);
+ r = dispc_init_features(dispc.pdev);
if (r)
return r;
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 5f6eea8..602102c 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -35,8 +35,6 @@
#include <video/omapdss.h>
-#include <plat/cpu.h>
-
#include "dss.h"
#include "dss_features.h"
@@ -796,29 +794,46 @@
.dpi_select_source = &dss_dpi_select_source_omap5,
};
-static int __init dss_init_features(struct device *dev)
+static int __init dss_init_features(struct platform_device *pdev)
{
+ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const struct dss_features *src;
struct dss_features *dst;
- dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
if (!dst) {
- dev_err(dev, "Failed to allocate local DSS Features\n");
+ dev_err(&pdev->dev, "Failed to allocate local DSS Features\n");
return -ENOMEM;
}
- if (cpu_is_omap24xx())
+ switch (pdata->version) {
+ case OMAPDSS_VER_OMAP24xx:
src = &omap24xx_dss_feats;
- else if (cpu_is_omap3630())
- src = &omap3630_dss_feats;
- else if (cpu_is_omap34xx())
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_AM35xx:
src = &omap34xx_dss_feats;
- else if (cpu_is_omap44xx())
+ break;
+
+ case OMAPDSS_VER_OMAP3630:
+ src = &omap3630_dss_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
src = &omap44xx_dss_feats;
- else if (soc_is_omap54xx())
+ break;
+
+ case OMAPDSS_VER_OMAP5:
src = &omap54xx_dss_feats;
- else
+ break;
+
+ default:
return -ENODEV;
+ }
memcpy(dst, src, sizeof(*dst));
dss.feat = dst;
@@ -835,7 +850,7 @@
dss.pdev = pdev;
- r = dss_init_features(&dss.pdev->dev);
+ r = dss_init_features(dss.pdev);
if (r)
return r;
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index acbc1e1..3e8287c 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -23,7 +23,6 @@
#include <linux/slab.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
@@ -825,10 +824,20 @@
};
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data)
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+ enum omapdss_version version)
{
- if (cpu_is_omap44xx())
+ switch (version) {
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
ip_data->ops = &omap4_hdmi_functions;
+ break;
+ default:
+ ip_data->ops = NULL;
+ }
+
+ WARN_ON(ip_data->ops == NULL);
}
#endif
@@ -929,29 +938,44 @@
return omap_current_dss_features->supported_rotation_types & rot_type;
}
-void dss_features_init(void)
+void dss_features_init(enum omapdss_version version)
{
- if (cpu_is_omap24xx())
+ switch (version) {
+ case OMAPDSS_VER_OMAP24xx:
omap_current_dss_features = &omap2_dss_features;
- else if (cpu_is_omap3630())
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ omap_current_dss_features = &omap3430_dss_features;
+ break;
+
+ case OMAPDSS_VER_OMAP3630:
omap_current_dss_features = &omap3630_dss_features;
- else if (cpu_is_omap34xx()) {
- if (soc_is_am35xx()) {
- omap_current_dss_features = &am35xx_dss_features;
- } else {
- omap_current_dss_features = &omap3430_dss_features;
- }
- }
- else if (omap_rev() == OMAP4430_REV_ES1_0)
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
omap_current_dss_features = &omap4430_es1_0_dss_features;
- else if (omap_rev() == OMAP4430_REV_ES2_0 ||
- omap_rev() == OMAP4430_REV_ES2_1 ||
- omap_rev() == OMAP4430_REV_ES2_2)
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES2:
omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
- else if (cpu_is_omap44xx())
+ break;
+
+ case OMAPDSS_VER_OMAP4:
omap_current_dss_features = &omap4_dss_features;
- else if (soc_is_omap54xx())
+ break;
+
+ case OMAPDSS_VER_OMAP5:
omap_current_dss_features = &omap5_dss_features;
- else
+ break;
+
+ case OMAPDSS_VER_AM35xx:
+ omap_current_dss_features = &am35xx_dss_features;
+ break;
+
+ default:
DSSWARN("Unsupported OMAP version");
+ break;
+ }
}
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 9218113..fc492ef 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -123,8 +123,9 @@
bool dss_has_feature(enum dss_feat_id id);
void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
-void dss_features_init(void);
+void dss_features_init(enum omapdss_version version);
#if defined(CONFIG_OMAP4_DSS_HDMI)
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data);
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+ enum omapdss_version version);
#endif
#endif
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 8c9b8b3..0d6d721 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -323,6 +323,7 @@
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
{
+ struct omap_dss_board_info *pdata = hdmi.pdev->dev.platform_data;
int r;
struct gpio gpios[] = {
@@ -333,7 +334,7 @@
DSSDBG("init_display\n");
- dss_init_hdmi_ip_ops(&hdmi.ip_data);
+ dss_init_hdmi_ip_ops(&hdmi.ip_data, pdata->version);
if (hdmi.vdda_hdmi_dac_reg == NULL) {
struct regulator *reg;
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index d630b26..532a31b 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -30,7 +30,7 @@
#include <linux/export.h>
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include <plat/vram.h>
#include "omapfb.h"
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 16db158..bc225e4 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -31,9 +31,8 @@
#include <linux/omapfb.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include <plat/vram.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include "omapfb.h"
@@ -2396,10 +2395,7 @@
goto err0;
}
- /* TODO : Replace cpu check with omap_has_vrfb once HAS_FEATURE
- * available for OMAP2 and OMAP3
- */
- if (def_vrfb && !cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ if (def_vrfb && !omap_vrfb_supported()) {
def_vrfb = 0;
dev_warn(&pdev->dev, "VRFB is not supported on this hardware, "
"ignoring the module parameter vrfb=y\n");
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index e8d8cc7..17aa174 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -30,7 +30,7 @@
#include <linux/omapfb.h>
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include "omapfb.h"
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index 7e99022..5d8fdac 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -26,9 +26,9 @@
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/platform_device.h>
-#include <plat/vrfb.h>
-#include <plat/sdrc.h>
+#include <video/omapvrfb.h>
#ifdef DEBUG
#define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
@@ -36,10 +36,10 @@
#define DBG(format, ...)
#endif
-#define SMS_ROT_VIRT_BASE(context, rot) \
- (((context >= 4) ? 0xD0000000 : 0x70000000) \
- + (0x4000000 * (context)) \
- + (0x1000000 * (rot)))
+#define SMS_ROT_CONTROL(context) (0x0 + 0x10 * context)
+#define SMS_ROT_SIZE(context) (0x4 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context) (0x8 + 0x10 * context)
+#define SMS_ROT_VIRT_BASE(rot) (0x1000000 * (rot))
#define OMAP_VRFB_SIZE (2048 * 2048 * 4)
@@ -53,10 +53,16 @@
#define SMS_PW_OFFSET 4
#define SMS_PS_OFFSET 0
-#define VRFB_NUM_CTXS 12
/* bitmap of reserved contexts */
static unsigned long ctx_map;
+struct vrfb_ctx {
+ u32 base;
+ u32 physical_ba;
+ u32 control;
+ u32 size;
+};
+
static DEFINE_MUTEX(ctx_lock);
/*
@@ -65,17 +71,34 @@
* we don't need locking, since no drivers will run until after the wake-up
* has finished.
*/
-static struct {
- u32 physical_ba;
- u32 control;
- u32 size;
-} vrfb_hw_context[VRFB_NUM_CTXS];
+
+static void __iomem *vrfb_base;
+
+static int num_ctxs;
+static struct vrfb_ctx *ctxs;
+
+static bool vrfb_loaded;
+
+static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
+}
+
+static void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx));
+}
+
+static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
+}
static inline void restore_hw_context(int ctx)
{
- omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx);
- omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx);
- omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx);
+ omap2_sms_write_rot_control(ctxs[ctx].control, ctx);
+ omap2_sms_write_rot_size(ctxs[ctx].size, ctx);
+ omap2_sms_write_rot_physical_ba(ctxs[ctx].physical_ba, ctx);
}
static u32 get_image_width_roundup(u16 width, u8 bytespp)
@@ -196,9 +219,9 @@
control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET;
control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET;
- vrfb_hw_context[ctx].physical_ba = paddr;
- vrfb_hw_context[ctx].size = size;
- vrfb_hw_context[ctx].control = control;
+ ctxs[ctx].physical_ba = paddr;
+ ctxs[ctx].size = size;
+ ctxs[ctx].control = control;
omap2_sms_write_rot_physical_ba(paddr, ctx);
omap2_sms_write_rot_size(size, ctx);
@@ -274,11 +297,11 @@
mutex_lock(&ctx_lock);
- for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
+ for (ctx = 0; ctx < num_ctxs; ++ctx)
if ((ctx_map & (1 << ctx)) == 0)
break;
- if (ctx == VRFB_NUM_CTXS) {
+ if (ctx == num_ctxs) {
pr_err("vrfb: no free contexts\n");
r = -EBUSY;
goto out;
@@ -293,7 +316,7 @@
vrfb->context = ctx;
for (rot = 0; rot < 4; ++rot) {
- paddr = SMS_ROT_VIRT_BASE(ctx, rot);
+ paddr = ctxs[ctx].base + SMS_ROT_VIRT_BASE(rot);
if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
pr_err("vrfb: failed to reserve VRFB "
"area for ctx %d, rotation %d\n",
@@ -314,3 +337,80 @@
return r;
}
EXPORT_SYMBOL(omap_vrfb_request_ctx);
+
+bool omap_vrfb_supported(void)
+{
+ return vrfb_loaded;
+}
+EXPORT_SYMBOL(omap_vrfb_supported);
+
+static int __init vrfb_probe(struct platform_device *pdev)
+{
+ struct resource *mem;
+ int i;
+
+ /* first resource is the register res, the rest are vrfb contexts */
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "can't get vrfb base address\n");
+ return -EINVAL;
+ }
+
+ vrfb_base = devm_request_and_ioremap(&pdev->dev, mem);
+ if (!vrfb_base) {
+ dev_err(&pdev->dev, "can't ioremap vrfb memory\n");
+ return -ENOMEM;
+ }
+
+ num_ctxs = pdev->num_resources - 1;
+
+ ctxs = devm_kzalloc(&pdev->dev,
+ sizeof(struct vrfb_ctx) * num_ctxs,
+ GFP_KERNEL);
+
+ if (!ctxs)
+ return -ENOMEM;
+
+ for (i = 0; i < num_ctxs; ++i) {
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
+ if (!mem) {
+ dev_err(&pdev->dev, "can't get vrfb ctx %d address\n",
+ i);
+ return -EINVAL;
+ }
+
+ ctxs[i].base = mem->start;
+ }
+
+ vrfb_loaded = true;
+
+ return 0;
+}
+
+static void __exit vrfb_remove(struct platform_device *pdev)
+{
+ vrfb_loaded = false;
+}
+
+static struct platform_driver vrfb_driver = {
+ .driver.name = "omapvrfb",
+ .remove = __exit_p(vrfb_remove),
+};
+
+static int __init vrfb_init(void)
+{
+ return platform_driver_probe(&vrfb_driver, &vrfb_probe);
+}
+
+static void __exit vrfb_exit(void)
+{
+ platform_driver_unregister(&vrfb_driver);
+}
+
+module_init(vrfb_init);
+module_exit(vrfb_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("OMAP VRFB");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/include/linux/mfd/menelaus.h
similarity index 96%
rename from arch/arm/plat-omap/include/plat/menelaus.h
rename to include/linux/mfd/menelaus.h
index 4a970ec..f097e89 100644
--- a/arch/arm/plat-omap/include/plat/menelaus.h
+++ b/include/linux/mfd/menelaus.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/menelaus.h
- *
* Functions to access Menelaus power management chip
*/
diff --git a/include/linux/omap-iommu.h b/include/linux/omap-iommu.h
new file mode 100644
index 0000000..cac78de
--- /dev/null
+++ b/include/linux/omap-iommu.h
@@ -0,0 +1,52 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _INTEL_IOMMU_H_
+#define _INTEL_IOMMU_H_
+
+struct iovm_struct {
+ struct omap_iommu *iommu; /* iommu object which this belongs to */
+ u32 da_start; /* area definition */
+ u32 da_end;
+ u32 flags; /* IOVMF_: see below */
+ struct list_head list; /* linked in ascending order */
+ const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */
+ void *va; /* mpu side mapped address */
+};
+
+#define MMU_RAM_ENDIAN_SHIFT 9
+#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
+#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE
+#define MMU_RAM_ELSZ_SHIFT 7
+#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8
+
+struct iommu_domain;
+
+extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
+extern u32
+omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da,
+ const struct sg_table *sgt, u32 flags);
+extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
+ struct device *dev, u32 da);
+extern u32
+omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev,
+ u32 da, size_t bytes, u32 flags);
+extern void
+omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
+ const u32 da);
+extern void *omap_da_to_va(struct device *dev, u32 da);
+
+extern void omap_iommu_save_ctx(struct device *dev);
+extern void omap_iommu_restore_ctx(struct device *dev);
+
+#endif
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index b0f2c56..6a293b7 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -8,6 +8,55 @@
#define __ATMEL_H__
#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
+#include <sound/atmel-ac97c.h>
+#include <linux/serial.h>
+#include <linux/platform_data/macb.h>
+
+/*
+ * at91: 6 USARTs and one DBGU port (SAM9260)
+ * avr32: 4
+ */
+#define ATMEL_MAX_UART 7
+
+ /* USB Device */
+struct at91_udc_data {
+ int vbus_pin; /* high == host powering us */
+ u8 vbus_active_low; /* vbus polarity */
+ u8 vbus_polled; /* Use polling, not interrupt */
+ int pullup_pin; /* active == D+ pulled up */
+ u8 pullup_active_low; /* true == pullup_pin is active low */
+};
+
+ /* Compact Flash */
+struct at91_cf_data {
+ int irq_pin; /* I/O IRQ */
+ int det_pin; /* Card detect */
+ int vcc_pin; /* power switching */
+ int rst_pin; /* card reset */
+ u8 chipselect; /* EBI Chip Select number */
+ u8 flags;
+#define AT91_CF_TRUE_IDE 0x01
+#define AT91_IDE_SWAP_A0_A2 0x02
+};
+
+ /* USB Host */
+#define AT91_MAX_USBH_PORTS 3
+struct at91_usbh_data {
+ int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */
+ int overcurrent_pin[AT91_MAX_USBH_PORTS];
+ u8 ports; /* number of ports on root hub */
+ u8 overcurrent_supported;
+ u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+ u8 overcurrent_status[AT91_MAX_USBH_PORTS];
+ u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
+};
/* NAND / SmartMedia */
struct atmel_nand_data {
@@ -24,4 +73,28 @@
unsigned int num_parts;
};
+ /* Serial */
+struct atmel_uart_data {
+ int num; /* port num */
+ short use_dma_tx; /* use transmit DMA? */
+ short use_dma_rx; /* use receive DMA? */
+ void __iomem *regs; /* virt. base address, if any */
+ struct serial_rs485 rs485; /* rs485 settings */
+};
+
+ /* Touchscreen Controller */
+struct at91_tsadcc_data {
+ unsigned int adc_clock;
+ u8 pendet_debounce;
+ u8 ts_sample_hold_time;
+};
+
+/* CAN */
+struct at91_can_data {
+ void (*transceiver_switch)(int on);
+};
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
#endif /* __ATMEL_H__ */
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index e8741c2..5d50b25 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <mach/irqs.h>
#define OMAP1_MPUIO_BASE 0xfffb5000
diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h
new file mode 100644
index 0000000..c677b9f
--- /dev/null
+++ b/include/linux/platform_data/iommu-omap.h
@@ -0,0 +1,49 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define MMU_REG_SIZE 256
+
+/**
+ * struct iommu_arch_data - omap iommu private data
+ * @name: name of the iommu device
+ * @iommu_dev: handle of the iommu device
+ *
+ * This is an omap iommu private data object, which binds an iommu user
+ * to its iommu device. This object should be placed at the iommu user's
+ * dev_archdata so generic IOMMU API can be used without having to
+ * utilize omap-specific plumbing anymore.
+ */
+struct omap_iommu_arch_data {
+ const char *name;
+ struct omap_iommu *iommu_dev;
+};
+
+/**
+ * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod
+ * @da_start: device address where the va space starts.
+ * @da_end: device address where the va space ends.
+ * @nr_tlb_entries: number of entries supported by the translation
+ * look-aside buffer (TLB).
+ */
+struct omap_mmu_dev_attr {
+ u32 da_start;
+ u32 da_end;
+ int nr_tlb_entries;
+};
+
+struct iommu_platform_data {
+ const char *name;
+ const char *clk_name;
+ const int nr_tlb_entries;
+ u32 da_start;
+ u32 da_end;
+};
diff --git a/arch/arm/plat-omap/include/plat/led.h b/include/linux/platform_data/leds-omap.h
similarity index 90%
rename from arch/arm/plat-omap/include/plat/led.h
rename to include/linux/platform_data/leds-omap.h
index 25e451e..56c9b2a 100644
--- a/arch/arm/plat-omap/include/plat/led.h
+++ b/include/linux/platform_data/leds-omap.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/led.h
- *
* Copyright (C) 2006 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/include/linux/platform_data/mmc-omap.h
similarity index 79%
rename from arch/arm/plat-omap/include/plat/mmc.h
rename to include/linux/platform_data/mmc-omap.h
index 346af5b..2bf1b30 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -8,27 +8,6 @@
* published by the Free Software Foundation.
*/
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <plat/omap_hwmod.h>
-
-#define OMAP15XX_NR_MMC 1
-#define OMAP16XX_NR_MMC 2
-#define OMAP1_MMC_SIZE 0x080
-#define OMAP1_MMC1_BASE 0xfffb7800
-#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
-
-#define OMAP24XX_NR_MMC 2
-#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE 0x4809c000
-
-#define OMAP4_MMC_REG_OFFSET 0x100
-
#define OMAP_MMC_MAX_SLOTS 2
/*
@@ -50,6 +29,8 @@
#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+struct mmc_card;
+
struct omap_mmc_dev_attr {
u8 flags;
};
@@ -127,6 +108,9 @@
#define HSMMC_HAS_PBIAS (1 << 0)
#define HSMMC_HAS_UPDATED_RESET (1 << 1)
#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
+#define MMC_OMAP7XX (1 << 3)
+#define MMC_OMAP15XX (1 << 4)
+#define MMC_OMAP16XX (1 << 5)
unsigned features;
int switch_pin; /* gpio (card detect) */
@@ -165,25 +149,3 @@
} slots[OMAP_MMC_MAX_SLOTS];
};
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
- int is_closed);
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers);
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers)
-{
-}
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
-extern int omap_msdi_reset(struct omap_hwmod *oh);
-
-#endif
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 1a68c1e..24d32ca 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -8,9 +8,13 @@
* published by the Free Software Foundation.
*/
-#include <plat/gpmc.h>
+#ifndef _MTD_NAND_OMAP2_H
+#define _MTD_NAND_OMAP2_H
+
#include <linux/mtd/partitions.h>
+#define GPMC_BCH_NUM_REMAINDER 8
+
enum nand_io {
NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
NAND_OMAP_POLLED, /* polled mode, without prefetch */
@@ -18,10 +22,38 @@
NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
};
+enum omap_ecc {
+ /* 1-bit ecc: stored at end of spare area */
+ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+ /* 1-bit ecc: stored at beginning of spare area as romcode */
+ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+ OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+ OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+};
+
+struct gpmc_nand_regs {
+ void __iomem *gpmc_status;
+ void __iomem *gpmc_nand_command;
+ void __iomem *gpmc_nand_address;
+ void __iomem *gpmc_nand_data;
+ void __iomem *gpmc_prefetch_config1;
+ void __iomem *gpmc_prefetch_config2;
+ void __iomem *gpmc_prefetch_control;
+ void __iomem *gpmc_prefetch_status;
+ void __iomem *gpmc_ecc_config;
+ void __iomem *gpmc_ecc_control;
+ void __iomem *gpmc_ecc_size_config;
+ void __iomem *gpmc_ecc1_result;
+ void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
+};
+
struct omap_nand_platform_data {
int cs;
struct mtd_partition *parts;
- struct gpmc_timings *gpmc_t;
int nr_parts;
bool dev_ready;
enum nand_io xfer_type;
@@ -30,14 +62,4 @@
struct gpmc_nand_regs reg;
};
-/* minimum size for IO mapping */
-#define NAND_IO_SIZE 4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
- return 0;
-}
#endif
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
index 2858667..685af7e 100644
--- a/include/linux/platform_data/mtd-onenand-omap2.h
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -9,17 +9,15 @@
* published by the Free Software Foundation.
*/
+#ifndef __MTD_ONENAND_OMAP2_H
+#define __MTD_ONENAND_OMAP2_H
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#define ONENAND_SYNC_READ (1 << 0)
#define ONENAND_SYNC_READWRITE (1 << 1)
-
-struct onenand_freq_info {
- u16 maf_id;
- u16 dev_id;
- u16 ver_id;
-};
+#define ONENAND_IN_OMAP34XX (1 << 2)
struct omap_onenand_platform_data {
int cs;
@@ -27,27 +25,9 @@
struct mtd_partition *parts;
int nr_parts;
int (*onenand_setup)(void __iomem *, int *freq_ptr);
- int (*get_freq)(const struct onenand_freq_info *freq_info,
- bool *clk_dep);
int dma_channel;
u8 flags;
u8 regulator_can_sleep;
u8 skip_initial_unlocking;
};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
#endif
diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h
new file mode 100644
index 0000000..8570bcf
--- /dev/null
+++ b/include/linux/platform_data/usb-omap.h
@@ -0,0 +1,80 @@
+/*
+ * usb-omap.h - Platform data for the various OMAP USB IPs
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define OMAP3_HS_USB_PORTS 3
+
+enum usbhs_omap_port_mode {
+ OMAP_USBHS_PORT_MODE_UNUSED,
+ OMAP_EHCI_PORT_MODE_PHY,
+ OMAP_EHCI_PORT_MODE_TLL,
+ OMAP_EHCI_PORT_MODE_HSIC,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
+};
+
+struct usbtll_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+};
+
+struct ehci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+ unsigned phy_reset:1;
+};
+
+struct ohci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ unsigned es2_compatibility:1;
+};
+
+struct usbhs_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ struct ehci_hcd_omap_platform_data *ehci_data;
+ struct ohci_hcd_omap_platform_data *ohci_data;
+};
+
+/*-------------------------------------------------------------------------*/
+
+struct omap_musb_board_data {
+ u8 interface_type;
+ u8 mode;
+ u16 power;
+ unsigned extvbus:1;
+ void (*set_phy_power)(u8 on);
+ void (*clear_irq)(void);
+ void (*set_mode)(u8 mode);
+ void (*reset)(void);
+};
+
+enum musb_interface {
+ MUSB_INTERFACE_ULPI,
+ MUSB_INTERFACE_UTMI
+};
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3729173..88c8294 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -314,6 +314,19 @@
int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel);
void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel);
+enum omapdss_version {
+ OMAPDSS_VER_UNKNOWN = 0,
+ OMAPDSS_VER_OMAP24xx,
+ OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */
+ OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */
+ OMAPDSS_VER_OMAP3630,
+ OMAPDSS_VER_AM35xx,
+ OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */
+ OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */
+ OMAPDSS_VER_OMAP4, /* All other OMAP4s */
+ OMAPDSS_VER_OMAP5,
+};
+
/* Board specific data */
struct omap_dss_board_info {
int (*get_context_loss_count)(struct device *dev);
@@ -323,6 +336,7 @@
int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask);
void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
int (*set_min_bus_tput)(struct device *dev, unsigned long r);
+ enum omapdss_version version;
};
/* Init with the board info */
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/include/video/omapvrfb.h
similarity index 95%
rename from arch/arm/plat-omap/include/plat/vrfb.h
rename to include/video/omapvrfb.h
index 3792bde..bb0bd89 100644
--- a/arch/arm/plat-omap/include/plat/vrfb.h
+++ b/include/video/omapvrfb.h
@@ -36,6 +36,7 @@
};
#ifdef CONFIG_OMAP2_VRFB
+extern bool omap_vrfb_supported(void);
extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
@@ -49,6 +50,7 @@
extern void omap_vrfb_restore_context(void);
#else
+static inline bool omap_vrfb_supported(void) { return false; }
static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c
index fad3506..c1900b2 100644
--- a/sound/soc/omap/am3517evm.c
+++ b/sound/soc/omap/am3517evm.c
@@ -25,8 +25,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 521bfc3..230b8c14 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -29,7 +29,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 340874e..52977aa 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -32,9 +32,14 @@
#include <sound/dmaengine_pcm.h>
#include <sound/soc.h>
-#include <plat/cpu.h>
#include "omap-pcm.h"
+#ifdef CONFIG_ARCH_OMAP1
+#define pcm_omap1510() cpu_is_omap1510()
+#else
+#define pcm_omap1510() 0
+#endif
+
static const struct snd_pcm_hardware omap_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
@@ -159,7 +164,7 @@
{
snd_pcm_uframes_t offset;
- if (cpu_is_omap1510())
+ if (pcm_omap1510())
offset = snd_dmaengine_pcm_pointer_no_residue(substream);
else
offset = snd_dmaengine_pcm_pointer(substream);
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index 3960e8d..06ef8d6 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -28,7 +28,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 597cae7..b462a2c 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -31,8 +31,6 @@
#include <sound/jack.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>